From d2dcd9083f101584e029cbd4f0e1a4e573170d43 Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Fri, 9 Mar 2012 06:27:12 +0530 Subject: logfs: destroy the reserved inodes while unmounting We were assuming that the evict_inode() would never be called on reserved inodes. However, (after the commit 8e22c1a4e logfs: get rid of magical inodes) while unmounting the file system, in put_super, we call iput() on all of the reserved inodes. The following simple test used to cause a kernel panic on LogFS: 1. Mount a LogFS file system on /mnt 2. Create a file $ touch /mnt/a 3. Try to unmount the FS $ umount /mnt The simple fix would be to drop the assumption and properly destroy the reserved inodes. Signed-off-by: Prasad Joshi --- fs/logfs/inode.c | 16 ++++++++++++++++ fs/logfs/readwrite.c | 1 - fs/logfs/segment.c | 2 +- 3 files changed, 17 insertions(+), 2 deletions(-) diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c index a422f42238b..df093d9e4da 100644 --- a/fs/logfs/inode.c +++ b/fs/logfs/inode.c @@ -156,10 +156,26 @@ static void __logfs_destroy_inode(struct inode *inode) call_rcu(&inode->i_rcu, logfs_i_callback); } +static void __logfs_destroy_meta_inode(struct inode *inode) +{ + struct logfs_inode *li = logfs_inode(inode); + BUG_ON(li->li_block); + call_rcu(&inode->i_rcu, logfs_i_callback); +} + static void logfs_destroy_inode(struct inode *inode) { struct logfs_inode *li = logfs_inode(inode); + if (inode->i_ino < LOGFS_RESERVED_INOS) { + /* + * The reserved inodes are never destroyed unless we are in + * unmont path. + */ + __logfs_destroy_meta_inode(inode); + return; + } + BUG_ON(list_empty(&li->li_freeing_list)); spin_lock(&logfs_inode_lock); li->li_refcount--; diff --git a/fs/logfs/readwrite.c b/fs/logfs/readwrite.c index e3ab5e5a904..c8ea8664699 100644 --- a/fs/logfs/readwrite.c +++ b/fs/logfs/readwrite.c @@ -2189,7 +2189,6 @@ void logfs_evict_inode(struct inode *inode) return; } - BUG_ON(inode->i_ino < LOGFS_RESERVED_INOS); page = inode_to_page(inode); BUG_ON(!page); /* FIXME: Use emergency page */ logfs_put_write_page(page); diff --git a/fs/logfs/segment.c b/fs/logfs/segment.c index e28d090c98d..038da099179 100644 --- a/fs/logfs/segment.c +++ b/fs/logfs/segment.c @@ -886,7 +886,7 @@ static struct logfs_area *alloc_area(struct super_block *sb) static void map_invalidatepage(struct page *page, unsigned long l) { - BUG(); + return; } static int map_releasepage(struct page *page, gfp_t g) -- cgit v1.2.3-70-g09d2 From cd8bfa9c8a13cf3facc5731da17e10188b3795d1 Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Mon, 2 Apr 2012 09:23:04 +0530 Subject: logfs: initialize the number of iovecs in bio This fixes the following crash when a LogFS file system, created on a encrypted LVM volume, was mounted [ 526.548034] BUG: unable to handle kernel NULL pointer dereference at [ 526.550106] IP: [] memcpy+0xb/0x120 [ 526.551008] PGD bd60067 PUD 1778d067 PMD 0 [ 526.551783] Oops: 0000 [#1] SMP Pid: 2043, comm: mount RIP: 0010:[] [] memcpy+0xb/0x120 Call Trace: kcryptd_io_read+0xdb/0x100 crypt_map+0xfd/0x190 __map_bio+0x48/0x150 __split_and_process_bio+0x51b/0x630 dm_request+0x138/0x230 generic_make_request+0xca/0x100 submit_bio+0x87/0x110 sync_request+0xdd/0x120 [logfs] bdev_readpage+0x2e/0x70 [logfs] do_read_cache_page+0x82/0x180 logfs_mount+0x2ad/0x770 [logfs] mount_fs+0x47/0x1c0 vfs_kern_mount+0x72/0x110 do_kern_mount+0x54/0x110 do_mount+0x520/0x7f0 sys_mount+0x90/0xe0 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42292 Reported-by: Witold Baryluk Signed-off-by: Prasad Joshi --- fs/logfs/dev_bdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/logfs/dev_bdev.c b/fs/logfs/dev_bdev.c index df0de27c273..ea29df36893 100644 --- a/fs/logfs/dev_bdev.c +++ b/fs/logfs/dev_bdev.c @@ -26,6 +26,7 @@ static int sync_request(struct page *page, struct block_device *bdev, int rw) struct completion complete; bio_init(&bio); + bio.bi_max_vecs = 1; bio.bi_io_vec = &bio_vec; bio_vec.bv_page = page; bio_vec.bv_len = PAGE_SIZE; -- cgit v1.2.3-70-g09d2 From ddb24bbac3681b87ae0638aacb702d9273e3c025 Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Mon, 23 Jul 2012 09:18:14 +0530 Subject: logfs: create a pagecache page if it is not present While writing the partial journal entries we assumed that the page associated with the journal would always in locatable. This incorrect assumption resulted in the following BUG kernel BUG at /home/benixon/WD_SMR/kernels/linux-3.3.7-logfs/fs/logfs/journal.c:569! EIP is at logfs_write_area+0xb6/0x109 [logfs] EAX: 00000000 EBX: 00000000 ECX: ef6efea4 EDX: 00000000 ESI: 001b9000 EDI: f009e000 EBP: c3c13f14 ESP: c3c13ef0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process sync (pid: 1799, ti=c3c12000 task=f07825b0 task.ti=c3c12000) Stack: 01001000 c3c13f26 781b9000 00000000 f009e000 f7286000 f1f83400 f8445071 f1f83400 c3c13f30 f8445ae9 c3c13f20 0000100a 000ee000 f009e000 00000001 c3c13f5c f8445d17 c05eb0ee 00000000 f1f83400 ef718000 f009e25c ea9c3d80 Call Trace: [] ? account_shadow+0x16d/0x16d [logfs] [] logfs_write_je+0x2a/0x44 [logfs] [] logfs_write_anchor+0x114/0x228 [logfs] [] ? empty+0x5/0x5 [] logfs_sync_fs+0x1e/0x31 [logfs] [] __sync_filesystem+0x5d/0x6f [] sync_one_sb+0x15/0x17 [] iterate_supers+0x59/0x9a [] ? __sync_filesystem+0x6f/0x6f [] sys_sync+0x29/0x4f [] sysenter_do_call+0x12/0x28 EIP: [] logfs_write_area+0xb6/0x109 [logfs] SS:ESP 0068:c3c13ef0 ---[ end trace ef6e9ef52601a945 ]--- The fix is to create the pagecache page if it is not locatable. Reported-and-tested-by: Benixon Dhas Signed-off-by: Prasad Joshi --- fs/logfs/journal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/logfs/journal.c b/fs/logfs/journal.c index 1e1c369df22..2a09b8d7398 100644 --- a/fs/logfs/journal.c +++ b/fs/logfs/journal.c @@ -565,7 +565,7 @@ static void write_wbuf(struct super_block *sb, struct logfs_area *area, index = ofs >> PAGE_SHIFT; page_ofs = ofs & (PAGE_SIZE - 1); - page = find_lock_page(mapping, index); + page = find_or_create_page(mapping, index, GFP_NOFS); BUG_ON(!page); memcpy(wbuf, page_address(page) + page_ofs, super->s_writesize); unlock_page(page); -- cgit v1.2.3-70-g09d2 From 41b93bc1ee7e7276db698dd66afa7b740cda517a Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Mon, 23 Jul 2012 09:35:52 +0530 Subject: logfs: maintain the ordering of meta-inode destruction LogFS does not use a specialized area to maintain the inodes. The inodes information is kept in a specialized file called inode file. Similarly, the segment information is kept in a segment file. Since the segment file also has an inode which is kept in the inode file, the inode for segment file must be evicted before the inode for inode file. The change fixes the following BUG during unmount Pid: 2057, comm: umount Not tainted 3.5.0-rc6+ #25 Bochs Bochs RIP: 0010:[] [] move_page_to_btree+0x32/0x1f0 [logfs] Process umount (pid: 2057, threadinfo ...) Call Trace: [] ? find_get_pages+0x2a/0x180 [] logfs_invalidatepage+0x85/0x90 [logfs] [] truncate_inode_page+0xb1/0xd0 [] truncate_inode_pages_range+0x15f/0x490 [] ? printk+0x78/0x7a [] truncate_inode_pages+0x15/0x20 [] logfs_evict_inode+0x6c/0x190 [logfs] [] ? _raw_spin_unlock+0x2b/0x40 [] evict+0xa7/0x1b0 [] dispose_list+0x3e/0x60 [] evict_inodes+0xf4/0x110 [] generic_shutdown_super+0x53/0xf0 [] logfs_kill_sb+0x52/0xf0 [logfs] [] deactivate_locked_super+0x45/0x80 [] deactivate_super+0x4a/0x70 [] mntput_no_expire+0xde/0x140 [] sys_umount+0x6f/0x3a0 [] system_call_fastpath+0x16/0x1b ---[ end trace 45f7752082cefafd ]--- Signed-off-by: Prasad Joshi --- fs/logfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c index df093d9e4da..6984562738d 100644 --- a/fs/logfs/inode.c +++ b/fs/logfs/inode.c @@ -389,8 +389,8 @@ static void logfs_put_super(struct super_block *sb) { struct logfs_super *super = logfs_super(sb); /* kill the meta-inodes */ - iput(super->s_master_inode); iput(super->s_segfile_inode); + iput(super->s_master_inode); iput(super->s_mapping_inode); } -- cgit v1.2.3-70-g09d2 From 9f0bbd8ca7905fcc0602c038013b095322fec939 Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Mon, 23 Jul 2012 10:32:11 +0530 Subject: logfs: query block device for number of pages to send with bio The block device driver puts a limit on maximum number of pages that can be sent with the bio. Not all block devices can handle BIO_MAX_PAGES number of pages in bio. Specifically the virtio-blk diriver limits it to 126. When the LogFS file system was excersized in KVM, the following bug from do_virtblk_request() was observed static void do_virtblk_request(struct request_queue *q) { .... .... while ((req = blk_peek_request(q)) != NULL) { BUG_ON(req->nr_phys_segments + 2 > vblk->sg_elems); .... .... } .... } The patch fixes the problem by querring the maximum number of pages in bio allowed from block device driver and then using those many pages during submit_bio. Signed-off-by: Prasad Joshi --- fs/logfs/dev_bdev.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/fs/logfs/dev_bdev.c b/fs/logfs/dev_bdev.c index ea29df36893..e784a217b50 100644 --- a/fs/logfs/dev_bdev.c +++ b/fs/logfs/dev_bdev.c @@ -96,12 +96,11 @@ static int __bdev_writeseg(struct super_block *sb, u64 ofs, pgoff_t index, struct address_space *mapping = super->s_mapping_inode->i_mapping; struct bio *bio; struct page *page; - struct request_queue *q = bdev_get_queue(sb->s_bdev); - unsigned int max_pages = queue_max_hw_sectors(q) >> (PAGE_SHIFT - 9); + unsigned int max_pages; int i; - if (max_pages > BIO_MAX_PAGES) - max_pages = BIO_MAX_PAGES; + max_pages = min(nr_pages, (size_t) bio_get_nr_vecs(super->s_bdev)); + bio = bio_alloc(GFP_NOFS, max_pages); BUG_ON(!bio); @@ -191,12 +190,11 @@ static int do_erase(struct super_block *sb, u64 ofs, pgoff_t index, { struct logfs_super *super = logfs_super(sb); struct bio *bio; - struct request_queue *q = bdev_get_queue(sb->s_bdev); - unsigned int max_pages = queue_max_hw_sectors(q) >> (PAGE_SHIFT - 9); + unsigned int max_pages; int i; - if (max_pages > BIO_MAX_PAGES) - max_pages = BIO_MAX_PAGES; + max_pages = min(nr_pages, (size_t) bio_get_nr_vecs(super->s_bdev)); + bio = bio_alloc(GFP_NOFS, max_pages); BUG_ON(!bio); -- cgit v1.2.3-70-g09d2 From bba3d8c3b3c0f2123be5bc687d1cddc13437c923 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 23 Jul 2012 12:16:19 +0100 Subject: [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts The following build error occured during a parisc build with swap-over-NFS patches applied. net/core/sock.c:274:36: error: initializer element is not constant net/core/sock.c:274:36: error: (near initialization for 'memalloc_socks') net/core/sock.c:274:36: error: initializer element is not constant Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Reported-by: Fengguang Wu Signed-off-by: Mel Gorman Cc: Signed-off-by: James Bottomley --- arch/parisc/include/asm/atomic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h index 6c6defc2461..af9cf30ed47 100644 --- a/arch/parisc/include/asm/atomic.h +++ b/arch/parisc/include/asm/atomic.h @@ -141,7 +141,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) #define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0) -#define ATOMIC_INIT(i) ((atomic_t) { (i) }) +#define ATOMIC_INIT(i) { (i) } #define smp_mb__before_atomic_dec() smp_mb() #define smp_mb__after_atomic_dec() smp_mb() @@ -150,7 +150,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) #ifdef CONFIG_64BIT -#define ATOMIC64_INIT(i) ((atomic64_t) { (i) }) +#define ATOMIC64_INIT(i) { (i) } static __inline__ s64 __atomic64_add_return(s64 i, atomic64_t *v) -- cgit v1.2.3-70-g09d2 From 76f16f83ee520d6c10356b0f6ff592441a6f08bd Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Mon, 30 Jul 2012 15:42:36 +0800 Subject: crypto: hifn_795x - fix 64bit division and undefined __divdi3 on 32bit archs Commit feb7b7ab928afa97a79a9c424e4e0691f49d63be changed NSEC_PER_SEC to 64-bit constant, which causes "DIV_ROUND_UP(NSEC_PER_SEC, dev->pk_clk_freq)" to generate __divdi3 call on 32-bit archs. Fix this by changing DIV_ROUND_UP to DIV_ROUND_UP_ULL. Signed-off-by: Jussi Kivilinna Acked-by: Randy Dunlap Signed-off-by: Herbert Xu --- drivers/crypto/hifn_795x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index c9c4befb5a8..df14358d7fa 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -821,8 +821,8 @@ static int hifn_register_rng(struct hifn_device *dev) /* * We must wait at least 256 Pk_clk cycles between two reads of the rng. */ - dev->rng_wait_time = DIV_ROUND_UP(NSEC_PER_SEC, dev->pk_clk_freq) * - 256; + dev->rng_wait_time = DIV_ROUND_UP_ULL(NSEC_PER_SEC, + dev->pk_clk_freq) * 256; dev->rng.name = dev->name; dev->rng.data_present = hifn_rng_data_present, -- cgit v1.2.3-70-g09d2 From f6ff53d3611b564661896be23369b54d84941a0e Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 2 Aug 2012 09:48:49 +0200 Subject: block: reorganize rounding of max_discard_sectors Mostly a preparation for the next patch. In principle this fixes an infinite loop if max_discard_sectors < granularity, but that really shouldn't happen. Signed-off-by: Paolo Bonzini Acked-by: Vivek Goyal Tested-by: Mike Snitzer Signed-off-by: Jens Axboe --- block/blk-lib.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index 2b461b496a7..16b06f62e68 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -44,6 +44,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, struct request_queue *q = bdev_get_queue(bdev); int type = REQ_WRITE | REQ_DISCARD; unsigned int max_discard_sectors; + unsigned int granularity; struct bio_batch bb; struct bio *bio; int ret = 0; @@ -54,18 +55,18 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, if (!blk_queue_discard(q)) return -EOPNOTSUPP; + /* Zero-sector (unknown) and one-sector granularities are the same. */ + granularity = max(q->limits.discard_granularity >> 9, 1U); + /* * Ensure that max_discard_sectors is of the proper * granularity */ max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9); + max_discard_sectors = round_down(max_discard_sectors, granularity); if (unlikely(!max_discard_sectors)) { /* Avoid infinite loop below. Being cautious never hurts. */ return -EOPNOTSUPP; - } else if (q->limits.discard_granularity) { - unsigned int disc_sects = q->limits.discard_granularity >> 9; - - max_discard_sectors &= ~(disc_sects - 1); } if (flags & BLKDEV_DISCARD_SECURE) { -- cgit v1.2.3-70-g09d2 From c6e666345e1b79c62ba82339cc7d55a89cb73f88 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 2 Aug 2012 09:48:50 +0200 Subject: block: split discard into aligned requests When a disk has large discard_granularity and small max_discard_sectors, discards are not split with optimal alignment. In the limit case of discard_granularity == max_discard_sectors, no request could be aligned correctly, so in fact you might end up with no discarded logical blocks at all. Another example that helps showing the condition in the patch is with discard_granularity == 64, max_discard_sectors == 128. A request that is submitted for 256 sectors 2..257 will be split in two: 2..129, 130..257. However, only 2 aligned blocks out of 3 are included in the request; 128..191 may be left intact and not discarded. With this patch, the first request will be truncated to ensure good alignment of what's left, and the split will be 2..127, 128..255, 256..257. The patch will also take into account the discard_alignment. At most one extra request will be introduced, because the first request will be reduced by at most granularity-1 sectors, and granularity must be less than max_discard_sectors. Subsequent requests will run on round_down(max_discard_sectors, granularity) sectors, as in the current code. Signed-off-by: Paolo Bonzini Acked-by: Vivek Goyal Tested-by: Mike Snitzer Signed-off-by: Jens Axboe --- block/blk-lib.c | 34 ++++++++++++++++++++++++---------- include/linux/blkdev.h | 10 ++++++++++ 2 files changed, 34 insertions(+), 10 deletions(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index 16b06f62e68..19cc761cacb 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -44,7 +44,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, struct request_queue *q = bdev_get_queue(bdev); int type = REQ_WRITE | REQ_DISCARD; unsigned int max_discard_sectors; - unsigned int granularity; + unsigned int granularity, alignment, mask; struct bio_batch bb; struct bio *bio; int ret = 0; @@ -57,10 +57,12 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, /* Zero-sector (unknown) and one-sector granularities are the same. */ granularity = max(q->limits.discard_granularity >> 9, 1U); + mask = granularity - 1; + alignment = (bdev_discard_alignment(bdev) >> 9) & mask; /* * Ensure that max_discard_sectors is of the proper - * granularity + * granularity, so that requests stay aligned after a split. */ max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9); max_discard_sectors = round_down(max_discard_sectors, granularity); @@ -80,25 +82,37 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, bb.wait = &wait; while (nr_sects) { + unsigned int req_sects; + sector_t end_sect; + bio = bio_alloc(gfp_mask, 1); if (!bio) { ret = -ENOMEM; break; } + req_sects = min_t(sector_t, nr_sects, max_discard_sectors); + + /* + * If splitting a request, and the next starting sector would be + * misaligned, stop the discard at the previous aligned sector. + */ + end_sect = sector + req_sects; + if (req_sects < nr_sects && (end_sect & mask) != alignment) { + end_sect = + round_down(end_sect - alignment, granularity) + + alignment; + req_sects = end_sect - sector; + } + bio->bi_sector = sector; bio->bi_end_io = bio_batch_end_io; bio->bi_bdev = bdev; bio->bi_private = &bb; - if (nr_sects > max_discard_sectors) { - bio->bi_size = max_discard_sectors << 9; - nr_sects -= max_discard_sectors; - sector += max_discard_sectors; - } else { - bio->bi_size = nr_sects << 9; - nr_sects = 0; - } + bio->bi_size = req_sects << 9; + nr_sects -= req_sects; + sector = end_sect; atomic_inc(&bb.done); submit_bio(type, bio); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 4e72a9d4823..281516ae8b4 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1139,6 +1139,16 @@ static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector & (lim->discard_granularity - 1); } +static inline int bdev_discard_alignment(struct block_device *bdev) +{ + struct request_queue *q = bdev_get_queue(bdev); + + if (bdev != bdev->bd_contains) + return bdev->bd_part->discard_alignment; + + return q->limits.discard_alignment; +} + static inline unsigned int queue_discard_zeroes_data(struct request_queue *q) { if (q->limits.max_discard_sectors && q->limits.discard_zeroes_data == 1) -- cgit v1.2.3-70-g09d2 From 53362a05ae683e12a20d9ffdf58a88094a0bed9d Mon Sep 17 00:00:00 2001 From: Jianpeng Ma Date: Thu, 2 Aug 2012 09:50:39 +0200 Subject: fs/block-dev.c:fix performance regression in O_DIRECT writes to md block devices For regular file, write operaion used blk_plug function.But for block file,write operation did not use blk_plug. This patch is also for write-cache mode for block-device. Signed-off-by: Jianpeng Ma Reviewed-by: NeilBrown Signed-off-by: Jens Axboe --- fs/block_dev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/block_dev.c b/fs/block_dev.c index 1e519195d45..38e721b35d4 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1578,10 +1578,12 @@ ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, loff_t pos) { struct file *file = iocb->ki_filp; + struct blk_plug plug; ssize_t ret; BUG_ON(iocb->ki_pos != pos); + blk_start_plug(&plug); ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos); if (ret > 0 || ret == -EIOCBQUEUED) { ssize_t err; @@ -1590,6 +1592,7 @@ ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, if (err < 0 && ret > 0) ret = err; } + blk_finish_plug(&plug); return ret; } EXPORT_SYMBOL_GPL(blkdev_aio_write); -- cgit v1.2.3-70-g09d2 From 3dd4765fce04c0b4af1e0bc4c0b10f906f95fabc Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 2 Aug 2012 14:30:56 -0400 Subject: nfs: tear down caches in nfs_init_writepagecache when allocation fails ...and ensure that we tear down the nfs_commit_data cache too when unloading the module. Cc: Bryan Schumaker Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust --- fs/nfs/write.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 5829d0ce7cf..e3b55372726 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1814,19 +1814,19 @@ int __init nfs_init_writepagecache(void) nfs_wdata_mempool = mempool_create_slab_pool(MIN_POOL_WRITE, nfs_wdata_cachep); if (nfs_wdata_mempool == NULL) - return -ENOMEM; + goto out_destroy_write_cache; nfs_cdata_cachep = kmem_cache_create("nfs_commit_data", sizeof(struct nfs_commit_data), 0, SLAB_HWCACHE_ALIGN, NULL); if (nfs_cdata_cachep == NULL) - return -ENOMEM; + goto out_destroy_write_mempool; nfs_commit_mempool = mempool_create_slab_pool(MIN_POOL_COMMIT, nfs_wdata_cachep); if (nfs_commit_mempool == NULL) - return -ENOMEM; + goto out_destroy_commit_cache; /* * NFS congestion size, scale with available memory. @@ -1849,11 +1849,20 @@ int __init nfs_init_writepagecache(void) nfs_congestion_kb = 256*1024; return 0; + +out_destroy_commit_cache: + kmem_cache_destroy(nfs_cdata_cachep); +out_destroy_write_mempool: + mempool_destroy(nfs_wdata_mempool); +out_destroy_write_cache: + kmem_cache_destroy(nfs_wdata_cachep); + return -ENOMEM; } void nfs_destroy_writepagecache(void) { mempool_destroy(nfs_commit_mempool); + kmem_cache_destroy(nfs_cdata_cachep); mempool_destroy(nfs_wdata_mempool); kmem_cache_destroy(nfs_wdata_cachep); } -- cgit v1.2.3-70-g09d2 From 8554116e17eef055d9dd58a94b3427cb2ad1c317 Mon Sep 17 00:00:00 2001 From: Idan Kedar Date: Thu, 2 Aug 2012 11:47:10 +0300 Subject: pnfs: defer release of pages in layoutget we have encountered a bug whereby reading a lot of files (copying fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused a general protection fault in xdr_shrink_bufhead. this function is called when decoding the response from LAYOUTGET. the decoding is done by a worker thread, and the caller of LAYOUTGET waits for the worker thread to complete. hitting Ctrl+C caused the synchronous wait to end and the next thing the caller does is to free the pages, so when the worker thread calls xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these pages has been moved to nfs4_layoutget_release. Signed-off-by: Idan Kedar Signed-off-by: Benny Halevy Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++++- fs/nfs/pnfs.c | 39 +------------------------------------ fs/nfs/pnfs.h | 2 +- 3 files changed, 58 insertions(+), 40 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index a99a8d94872..6a78d49da5c 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -6223,11 +6223,58 @@ static void nfs4_layoutget_done(struct rpc_task *task, void *calldata) dprintk("<-- %s\n", __func__); } +static size_t max_response_pages(struct nfs_server *server) +{ + u32 max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz; + return nfs_page_array_len(0, max_resp_sz); +} + +static void nfs4_free_pages(struct page **pages, size_t size) +{ + int i; + + if (!pages) + return; + + for (i = 0; i < size; i++) { + if (!pages[i]) + break; + __free_page(pages[i]); + } + kfree(pages); +} + +static struct page **nfs4_alloc_pages(size_t size, gfp_t gfp_flags) +{ + struct page **pages; + int i; + + pages = kcalloc(size, sizeof(struct page *), gfp_flags); + if (!pages) { + dprintk("%s: can't alloc array of %zu pages\n", __func__, size); + return NULL; + } + + for (i = 0; i < size; i++) { + pages[i] = alloc_page(gfp_flags); + if (!pages[i]) { + dprintk("%s: failed to allocate page\n", __func__); + nfs4_free_pages(pages, size); + return NULL; + } + } + + return pages; +} + static void nfs4_layoutget_release(void *calldata) { struct nfs4_layoutget *lgp = calldata; + struct nfs_server *server = NFS_SERVER(lgp->args.inode); + size_t max_pages = max_response_pages(server); dprintk("--> %s\n", __func__); + nfs4_free_pages(lgp->args.layout.pages, max_pages); put_nfs_open_context(lgp->args.ctx); kfree(calldata); dprintk("<-- %s\n", __func__); @@ -6239,9 +6286,10 @@ static const struct rpc_call_ops nfs4_layoutget_call_ops = { .rpc_release = nfs4_layoutget_release, }; -int nfs4_proc_layoutget(struct nfs4_layoutget *lgp) +int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) { struct nfs_server *server = NFS_SERVER(lgp->args.inode); + size_t max_pages = max_response_pages(server); struct rpc_task *task; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_LAYOUTGET], @@ -6259,6 +6307,13 @@ int nfs4_proc_layoutget(struct nfs4_layoutget *lgp) dprintk("--> %s\n", __func__); + lgp->args.layout.pages = nfs4_alloc_pages(max_pages, gfp_flags); + if (!lgp->args.layout.pages) { + nfs4_layoutget_release(lgp); + return -ENOMEM; + } + lgp->args.layout.pglen = max_pages * PAGE_SIZE; + lgp->res.layoutp = &lgp->args.layout; lgp->res.seq_res.sr_slot = NULL; nfs41_init_sequence(&lgp->args.seq_args, &lgp->res.seq_res, 0); diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 76875bfcf19..2e00feacd4b 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -583,9 +583,6 @@ send_layoutget(struct pnfs_layout_hdr *lo, struct nfs_server *server = NFS_SERVER(ino); struct nfs4_layoutget *lgp; struct pnfs_layout_segment *lseg = NULL; - struct page **pages = NULL; - int i; - u32 max_resp_sz, max_pages; dprintk("--> %s\n", __func__); @@ -594,20 +591,6 @@ send_layoutget(struct pnfs_layout_hdr *lo, if (lgp == NULL) return NULL; - /* allocate pages for xdr post processing */ - max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz; - max_pages = nfs_page_array_len(0, max_resp_sz); - - pages = kcalloc(max_pages, sizeof(struct page *), gfp_flags); - if (!pages) - goto out_err_free; - - for (i = 0; i < max_pages; i++) { - pages[i] = alloc_page(gfp_flags); - if (!pages[i]) - goto out_err_free; - } - lgp->args.minlength = PAGE_CACHE_SIZE; if (lgp->args.minlength > range->length) lgp->args.minlength = range->length; @@ -616,39 +599,19 @@ send_layoutget(struct pnfs_layout_hdr *lo, lgp->args.type = server->pnfs_curr_ld->id; lgp->args.inode = ino; lgp->args.ctx = get_nfs_open_context(ctx); - lgp->args.layout.pages = pages; - lgp->args.layout.pglen = max_pages * PAGE_SIZE; lgp->lsegpp = &lseg; lgp->gfp_flags = gfp_flags; /* Synchronously retrieve layout information from server and * store in lseg. */ - nfs4_proc_layoutget(lgp); + nfs4_proc_layoutget(lgp, gfp_flags); if (!lseg) { /* remember that LAYOUTGET failed and suspend trying */ set_bit(lo_fail_bit(range->iomode), &lo->plh_flags); } - /* free xdr pages */ - for (i = 0; i < max_pages; i++) - __free_page(pages[i]); - kfree(pages); - return lseg; - -out_err_free: - /* free any allocated xdr pages, lgp as it's not used */ - if (pages) { - for (i = 0; i < max_pages; i++) { - if (!pages[i]) - break; - __free_page(pages[i]); - } - kfree(pages); - } - kfree(lgp); - return NULL; } /* diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 2c6c80503ba..5ea019e80b4 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -172,7 +172,7 @@ extern int nfs4_proc_getdevicelist(struct nfs_server *server, struct pnfs_devicelist *devlist); extern int nfs4_proc_getdeviceinfo(struct nfs_server *server, struct pnfs_device *dev); -extern int nfs4_proc_layoutget(struct nfs4_layoutget *lgp); +extern int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags); extern int nfs4_proc_layoutreturn(struct nfs4_layoutreturn *lrp); /* pnfs.c */ -- cgit v1.2.3-70-g09d2 From 21d1f58aedc5f7ac4bb0c4e3d78c74ea31ac050f Mon Sep 17 00:00:00 2001 From: Idan Kedar Date: Thu, 2 Aug 2012 11:47:11 +0300 Subject: pnfs: nfs4_proc_layoutget returns void since the only user of nfs4_proc_layoutget is send_layoutget, which ignores its return value, there is no reason to return any value. Signed-off-by: Idan Kedar Signed-off-by: Benny Halevy Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 8 ++++---- fs/nfs/pnfs.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 6a78d49da5c..f94f6b3928f 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -6286,7 +6286,7 @@ static const struct rpc_call_ops nfs4_layoutget_call_ops = { .rpc_release = nfs4_layoutget_release, }; -int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) +void nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) { struct nfs_server *server = NFS_SERVER(lgp->args.inode); size_t max_pages = max_response_pages(server); @@ -6310,7 +6310,7 @@ int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) lgp->args.layout.pages = nfs4_alloc_pages(max_pages, gfp_flags); if (!lgp->args.layout.pages) { nfs4_layoutget_release(lgp); - return -ENOMEM; + return; } lgp->args.layout.pglen = max_pages * PAGE_SIZE; @@ -6319,7 +6319,7 @@ int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) nfs41_init_sequence(&lgp->args.seq_args, &lgp->res.seq_res, 0); task = rpc_run_task(&task_setup_data); if (IS_ERR(task)) - return PTR_ERR(task); + return; status = nfs4_wait_for_completion_rpc_task(task); if (status == 0) status = task->tk_status; @@ -6327,7 +6327,7 @@ int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) status = pnfs_layout_process(lgp); rpc_put_task(task); dprintk("<-- %s status=%d\n", __func__, status); - return status; + return; } static void diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 5ea019e80b4..745aa1b39e7 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -172,7 +172,7 @@ extern int nfs4_proc_getdevicelist(struct nfs_server *server, struct pnfs_devicelist *devlist); extern int nfs4_proc_getdeviceinfo(struct nfs_server *server, struct pnfs_device *dev); -extern int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags); +extern void nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags); extern int nfs4_proc_layoutreturn(struct nfs4_layoutreturn *lrp); /* pnfs.c */ -- cgit v1.2.3-70-g09d2 From f6166384095b7ecf77752b5e9096e6d03d75f7ae Mon Sep 17 00:00:00 2001 From: Peng Tao Date: Thu, 2 Aug 2012 15:36:09 +0300 Subject: NFS41: add pg_layout_private to nfs_pageio_descriptor To allow layout driver to pass private information around pg_init/pg_doio. Signed-off-by: Peng Tao Signed-off-by: Boaz Harrosh Signed-off-by: Trond Myklebust --- fs/nfs/pagelist.c | 2 ++ include/linux/nfs_page.h | 1 + include/linux/nfs_xdr.h | 1 + 3 files changed, 4 insertions(+) diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index 1a6732ed04a..311a79681e2 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -49,6 +49,7 @@ void nfs_pgheader_init(struct nfs_pageio_descriptor *desc, hdr->io_start = req_offset(hdr->req); hdr->good_bytes = desc->pg_count; hdr->dreq = desc->pg_dreq; + hdr->layout_private = desc->pg_layout_private; hdr->release = release; hdr->completion_ops = desc->pg_completion_ops; if (hdr->completion_ops->init_hdr) @@ -268,6 +269,7 @@ void nfs_pageio_init(struct nfs_pageio_descriptor *desc, desc->pg_error = 0; desc->pg_lseg = NULL; desc->pg_dreq = NULL; + desc->pg_layout_private = NULL; } EXPORT_SYMBOL_GPL(nfs_pageio_init); diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index 880805774f9..92ce5783b70 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -69,6 +69,7 @@ struct nfs_pageio_descriptor { const struct nfs_pgio_completion_ops *pg_completion_ops; struct pnfs_layout_segment *pg_lseg; struct nfs_direct_req *pg_dreq; + void *pg_layout_private; }; #define NFS_WBACK_BUSY(req) (test_bit(PG_BUSY,&(req)->wb_flags)) diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 00485e08439..ac7c8ae254f 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1248,6 +1248,7 @@ struct nfs_pgio_header { void (*release) (struct nfs_pgio_header *hdr); const struct nfs_pgio_completion_ops *completion_ops; struct nfs_direct_req *dreq; + void *layout_private; spinlock_t lock; /* fields protected by lock */ int pnfs_error; -- cgit v1.2.3-70-g09d2 From 963ab9e5da95c654bb3ab937cc478de4f7088a96 Mon Sep 17 00:00:00 2001 From: Asias He Date: Thu, 2 Aug 2012 23:42:03 +0200 Subject: block: Introduce __blk_segment_map_sg() helper Split the mapping code in blk_rq_map_sg() to a helper __blk_segment_map_sg(), so that other mapping function, e.g. blk_bio_map_sg(), can share the code. Cc: Rusty Russell Cc: Christoph Hellwig Cc: Tejun Heo Cc: Shaohua Li Cc: "Michael S. Tsirkin" Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Suggested-by: Jens Axboe Suggested-by: Tejun Heo Signed-off-by: Asias He Signed-off-by: Jens Axboe --- block/blk-merge.c | 80 +++++++++++++++++++++++++++++++------------------------ 1 file changed, 45 insertions(+), 35 deletions(-) diff --git a/block/blk-merge.c b/block/blk-merge.c index 160035f5488..576b68e7924 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -110,6 +110,49 @@ static int blk_phys_contig_segment(struct request_queue *q, struct bio *bio, return 0; } +static void +__blk_segment_map_sg(struct request_queue *q, struct bio_vec *bvec, + struct scatterlist *sglist, struct bio_vec **bvprv, + struct scatterlist **sg, int *nsegs, int *cluster) +{ + + int nbytes = bvec->bv_len; + + if (*bvprv && *cluster) { + if ((*sg)->length + nbytes > queue_max_segment_size(q)) + goto new_segment; + + if (!BIOVEC_PHYS_MERGEABLE(*bvprv, bvec)) + goto new_segment; + if (!BIOVEC_SEG_BOUNDARY(q, *bvprv, bvec)) + goto new_segment; + + (*sg)->length += nbytes; + } else { +new_segment: + if (!*sg) + *sg = sglist; + else { + /* + * If the driver previously mapped a shorter + * list, we could see a termination bit + * prematurely unless it fully inits the sg + * table on each mapping. We KNOW that there + * must be more entries here or the driver + * would be buggy, so force clear the + * termination bit to avoid doing a full + * sg_init_table() in drivers for each command. + */ + (*sg)->page_link &= ~0x02; + *sg = sg_next(*sg); + } + + sg_set_page(*sg, bvec->bv_page, nbytes, bvec->bv_offset); + (*nsegs)++; + } + *bvprv = bvec; +} + /* * map a request to scatterlist, return number of sg entries setup. Caller * must make sure sg can hold rq->nr_phys_segments entries @@ -131,41 +174,8 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq, bvprv = NULL; sg = NULL; rq_for_each_segment(bvec, rq, iter) { - int nbytes = bvec->bv_len; - - if (bvprv && cluster) { - if (sg->length + nbytes > queue_max_segment_size(q)) - goto new_segment; - - if (!BIOVEC_PHYS_MERGEABLE(bvprv, bvec)) - goto new_segment; - if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bvec)) - goto new_segment; - - sg->length += nbytes; - } else { -new_segment: - if (!sg) - sg = sglist; - else { - /* - * If the driver previously mapped a shorter - * list, we could see a termination bit - * prematurely unless it fully inits the sg - * table on each mapping. We KNOW that there - * must be more entries here or the driver - * would be buggy, so force clear the - * termination bit to avoid doing a full - * sg_init_table() in drivers for each command. - */ - sg->page_link &= ~0x02; - sg = sg_next(sg); - } - - sg_set_page(sg, bvec->bv_page, nbytes, bvec->bv_offset); - nsegs++; - } - bvprv = bvec; + __blk_segment_map_sg(q, bvec, sglist, &bvprv, &sg, + &nsegs, &cluster); } /* segments in rq */ -- cgit v1.2.3-70-g09d2 From 85b9f66a41eb8ee3f1dfc95707412705463cdd97 Mon Sep 17 00:00:00 2001 From: Asias He Date: Thu, 2 Aug 2012 23:42:04 +0200 Subject: block: Add blk_bio_map_sg() helper Add a helper to map a bio to a scatterlist, modelled after blk_rq_map_sg. This helper is useful for any driver that wants to create a scatterlist from its ->make_request_fn method. Changes in v2: - Use __blk_segment_map_sg to avoid duplicated code - Add cocbook style function comment Cc: Rusty Russell Cc: Christoph Hellwig Cc: Tejun Heo Cc: Shaohua Li Cc: "Michael S. Tsirkin" Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Christoph Hellwig Signed-off-by: Minchan Kim Signed-off-by: Asias He Signed-off-by: Jens Axboe --- block/blk-merge.c | 37 +++++++++++++++++++++++++++++++++++++ include/linux/blkdev.h | 2 ++ 2 files changed, 39 insertions(+) diff --git a/block/blk-merge.c b/block/blk-merge.c index 576b68e7924..e76279e4116 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -209,6 +209,43 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq, } EXPORT_SYMBOL(blk_rq_map_sg); +/** + * blk_bio_map_sg - map a bio to a scatterlist + * @q: request_queue in question + * @bio: bio being mapped + * @sglist: scatterlist being mapped + * + * Note: + * Caller must make sure sg can hold bio->bi_phys_segments entries + * + * Will return the number of sg entries setup + */ +int blk_bio_map_sg(struct request_queue *q, struct bio *bio, + struct scatterlist *sglist) +{ + struct bio_vec *bvec, *bvprv; + struct scatterlist *sg; + int nsegs, cluster; + unsigned long i; + + nsegs = 0; + cluster = blk_queue_cluster(q); + + bvprv = NULL; + sg = NULL; + bio_for_each_segment(bvec, bio, i) { + __blk_segment_map_sg(q, bvec, sglist, &bvprv, &sg, + &nsegs, &cluster); + } /* segments in bio */ + + if (sg) + sg_mark_end(sg); + + BUG_ON(bio->bi_phys_segments && nsegs > bio->bi_phys_segments); + return nsegs; +} +EXPORT_SYMBOL(blk_bio_map_sg); + static inline int ll_new_hw_segment(struct request_queue *q, struct request *req, struct bio *bio) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 281516ae8b4..dc632975d54 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -894,6 +894,8 @@ extern void blk_queue_flush_queueable(struct request_queue *q, bool queueable); extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev); extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *); +extern int blk_bio_map_sg(struct request_queue *q, struct bio *bio, + struct scatterlist *sglist); extern void blk_dump_rq_flags(struct request *, char *); extern long nr_blockdev_pages(void); -- cgit v1.2.3-70-g09d2 From 7de6e28417c65919cf2c1621841a650c4a3afbbd Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 2 Aug 2012 15:38:23 +0300 Subject: pnfs-obj: Better IO pattern in case of unaligned offset Depending on layout and ARCH, ORE has some limits on max IO sizes which is communicated on (what else) ore_layout->max_io_length, which is always stripe aligned. This was considered as the pg_test boundary for splitting and starting a new IO. But in the case of a long IO where the start offset is not aligned what would happen is that both end of IO[N] and start of IO[N+1] would be unaligned, causing each IO boundary parity unit to be calculated and written twice. So what we do in this patch is split the very start of an unaligned IO, up to a stripe boundary, and then next IO's can continue fully aligned til the end. We might be sacrificing the case where the full unaligned IO would fit within a single max_io_length, but the sacrifice is well worth the elimination of double calculation and parity units IO. Actually the sacrificing is marginal and is almost unmeasurable. TODO: If we know the total expected linear segment that will be received, at pg_init, we could use that information in many places: 1. blocks-layout get_layout write segment size 2. Better mds-threshold 3. In above situation for a better clean split I will do this in future submission. Signed-off-by: Boaz Harrosh Signed-off-by: Trond Myklebust --- fs/nfs/objlayout/objio_osd.c | 55 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 52 insertions(+), 3 deletions(-) diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index f50d3e8d6f2..ea6d111b03e 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -570,17 +570,66 @@ static bool objio_pg_test(struct nfs_pageio_descriptor *pgio, return false; return pgio->pg_count + req->wb_bytes <= - OBJIO_LSEG(pgio->pg_lseg)->layout.max_io_length; + (unsigned long)pgio->pg_layout_private; +} + +void objio_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) +{ + pnfs_generic_pg_init_read(pgio, req); + if (unlikely(pgio->pg_lseg == NULL)) + return; /* Not pNFS */ + + pgio->pg_layout_private = (void *) + OBJIO_LSEG(pgio->pg_lseg)->layout.max_io_length; +} + +static bool aligned_on_raid_stripe(u64 offset, struct ore_layout *layout, + unsigned long *stripe_end) +{ + u32 stripe_off; + unsigned stripe_size; + + if (layout->raid_algorithm == PNFS_OSD_RAID_0) + return true; + + stripe_size = layout->stripe_unit * + (layout->group_width - layout->parity); + + div_u64_rem(offset, stripe_size, &stripe_off); + if (!stripe_off) + return true; + + *stripe_end = stripe_size - stripe_off; + return false; +} + +void objio_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) +{ + unsigned long stripe_end = 0; + + pnfs_generic_pg_init_write(pgio, req); + if (unlikely(pgio->pg_lseg == NULL)) + return; /* Not pNFS */ + + if (req->wb_offset || + !aligned_on_raid_stripe(req->wb_index * PAGE_SIZE, + &OBJIO_LSEG(pgio->pg_lseg)->layout, + &stripe_end)) { + pgio->pg_layout_private = (void *)stripe_end; + } else { + pgio->pg_layout_private = (void *) + OBJIO_LSEG(pgio->pg_lseg)->layout.max_io_length; + } } static const struct nfs_pageio_ops objio_pg_read_ops = { - .pg_init = pnfs_generic_pg_init_read, + .pg_init = objio_init_read, .pg_test = objio_pg_test, .pg_doio = pnfs_generic_pg_readpages, }; static const struct nfs_pageio_ops objio_pg_write_ops = { - .pg_init = pnfs_generic_pg_init_write, + .pg_init = objio_init_write, .pg_test = objio_pg_test, .pg_doio = pnfs_generic_pg_writepages, }; -- cgit v1.2.3-70-g09d2 From 1f3f7eceff47f9e320ca67b3e9f16fb295106514 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 25 Jun 2012 13:36:14 +0530 Subject: usb: musb: Fix wrong config for am33xx and ti81xx Commit "bb6abcf: ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX" and "3395955: ARM: OMAP2+: Kconfig: convert SOC_OMAPTI81XX to SOC_TI81XX" has changed the SOC config for AM33XX and TI81XX as shown below CONFIG_SOC_OMAPAM33XX --> CONFIG_SOC_AM33XX CONFIG_SOC_OMAPTI81XX --> CONFIG_SOC_TI81XX So updating the same at musb driver for AM33XX and TI81XX platforms. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi --- drivers/usb/musb/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index ef0c3f9f094..6259f0d9932 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -8,7 +8,7 @@ config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' depends on USB && USB_GADGET select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN) - select NOP_USB_XCEIV if (SOC_OMAPTI81XX || SOC_OMAPAM33XX) + select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX) select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS @@ -57,7 +57,7 @@ config USB_MUSB_AM35X config USB_MUSB_DSPS tristate "TI DSPS platforms" - depends on SOC_OMAPTI81XX || SOC_OMAPAM33XX + depends on SOC_TI81XX || SOC_AM33XX config USB_MUSB_BLACKFIN tristate "Blackfin" -- cgit v1.2.3-70-g09d2 From 3bb5534853dbb1e445a9b26ecab8ad331ff14a7e Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 3 Jul 2012 17:37:10 +0530 Subject: usb: musb: am335x: fix pdev resource bug We are overwriting the resource->name to "mc" so that musb_core.c can understand it but this is also changing the platform device's resource->name as the "name" address remains same. Fixing the same by changing the resource->name field of local structure only. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_dsps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 217808d9fbe..dabe7b63654 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -479,9 +479,9 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) ret = -ENODEV; goto err0; } - strcpy((u8 *)res->name, "mc"); res->parent = NULL; resources[1] = *res; + resources[1].name = "mc"; /* allocate the child platform device */ musb = platform_device_alloc("musb-hdrc", -1); -- cgit v1.2.3-70-g09d2 From 0e38c4ed83027e7e7d16568e43fb34a32c14f800 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 3 Jul 2012 17:37:11 +0530 Subject: usb: musb: reorder runtime pm call The clock need to be enabled before the musb_core platform device is created and registered. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_dsps.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index dabe7b63654..494772fc9e2 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -566,27 +566,28 @@ static int __devinit dsps_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, glue); - /* create the child platform device for first instances of musb */ - ret = dsps_create_musb_pdev(glue, 0); - if (ret != 0) { - dev_err(&pdev->dev, "failed to create child pdev\n"); - goto err2; - } - /* enable the usbss clocks */ pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) { dev_err(&pdev->dev, "pm_runtime_get_sync FAILED"); + goto err2; + } + + /* create the child platform device for first instances of musb */ + ret = dsps_create_musb_pdev(glue, 0); + if (ret != 0) { + dev_err(&pdev->dev, "failed to create child pdev\n"); goto err3; } return 0; err3: - pm_runtime_disable(&pdev->dev); + pm_runtime_put(&pdev->dev); err2: + pm_runtime_disable(&pdev->dev); kfree(glue->wrp); err1: kfree(glue); -- cgit v1.2.3-70-g09d2 From 0676806707281e27b13d44323bed580a8160b7a4 Mon Sep 17 00:00:00 2001 From: Jianpeng Ma Date: Fri, 3 Aug 2012 10:42:00 +0200 Subject: block: Don't use static to define "void *p" in show_partition_start() I met a odd prblem:read /proc/partitions may return zero. I wrote a file test.c: int main() { char buff[4096]; int ret; int fd; printf("pid=%d\n",getpid()); while (1) { fd = open("/proc/partitions", O_RDONLY); if (fd < 0) { printf("open error %s\n", strerror(errno)); return 0; } ret = read(fd, buff, 4096); if (ret <= 0) printf("ret=%d, %s, %ld\n", ret, strerror(errno), lseek(fd,0,SEEK_CUR)); close(fd); } exit(0); } You can reproduce by: 1:while true;do cat /proc/partitions > /dev/null ;done 2:./test I reviewed the code and found: >> static void *show_partition_start(struct seq_file *seqf, loff_t *pos) >> { >> static void *p; >> >> p = disk_seqf_start(seqf, pos); >> if (!IS_ERR_OR_NULL(p) && !*pos) >> seq_puts(seqf, "major minor #blocks name\n\n"); >> return p; >> } test cat /proc/partitions p = disk_seqf_start()(Not NULL) p = disk_seqf_start()(NULL because pos) if (!IS_ERR_OR_NULL(p) && !*pos) Signed-off-by: Jianpeng Ma Signed-off-by: Jens Axboe --- block/genhd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/genhd.c b/block/genhd.c index cac7366957c..d839723303c 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -835,7 +835,7 @@ static void disk_seqf_stop(struct seq_file *seqf, void *v) static void *show_partition_start(struct seq_file *seqf, loff_t *pos) { - static void *p; + void *p; p = disk_seqf_start(seqf, pos); if (!IS_ERR_OR_NULL(p) && !*pos) -- cgit v1.2.3-70-g09d2 From 5b24c421621792fcc588af6f644d6acf2dd798cc Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 2 Aug 2012 15:33:59 +0200 Subject: [PARISC] fix personality flag check in copy_thread() Directly comparing task_struct->personality against PER_* is not fully correct, as it doesn't take flags potentially stored in top three bytes into account. Analogically, directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes. Signed-off-by: Jiri Kosina Signed-off-by: James Bottomley --- arch/parisc/kernel/process.c | 2 +- arch/parisc/kernel/sys_parisc.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index d4b94b395c1..2c05a9292a8 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -309,7 +309,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp, cregs->ksp = (unsigned long)stack + (pregs->gr[21] & (THREAD_SIZE - 1)); cregs->gr[30] = usp; - if (p->personality == PER_HPUX) { + if (personality(p->personality) == PER_HPUX) { #ifdef CONFIG_HPUX cregs->kpc = (unsigned long) &hpux_child_return; #else diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index c9b932260f4..7426e40699b 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -225,12 +225,12 @@ long parisc_personality(unsigned long personality) long err; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; err = sys_personality(personality); - if (err == PER_LINUX32) - err = PER_LINUX; + if (personality(err) == PER_LINUX32) + err = (err & ~PER_MASK) | PER_LINUX; return err; } -- cgit v1.2.3-70-g09d2 From c9f11c30374329a0d2a88cf05281ca49d8eca9ab Mon Sep 17 00:00:00 2001 From: Jia Hongtao Date: Fri, 3 Aug 2012 18:14:09 +0800 Subject: powerpc/fsl-pci: Only scan PCI bus if configured as a host We change fsl_add_bridge to return -ENODEV if the controller is working in agent mode. Then check the return value of fsl_add_bridge to guarantee that only successfully added host bus will be scanned. Signed-off-by: Jia Hongtao Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index a7b2a600d0a..c37f4613632 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -465,7 +465,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) iounmap(hose->cfg_data); iounmap(hose->cfg_addr); pcibios_free_controller(hose); - return 0; + return -ENODEV; } setup_pci_cmd(hose); @@ -827,6 +827,7 @@ struct device_node *fsl_pci_primary; void __devinit fsl_pci_init(void) { + int ret; struct device_node *node; struct pci_controller *hose; dma_addr_t max = 0xffffffff; @@ -855,10 +856,12 @@ void __devinit fsl_pci_init(void) if (!fsl_pci_primary) fsl_pci_primary = node; - fsl_add_bridge(node, fsl_pci_primary == node); - hose = pci_find_hose_for_OF_device(node); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + ret = fsl_add_bridge(node, fsl_pci_primary == node); + if (ret == 0) { + hose = pci_find_hose_for_OF_device(node); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } } } -- cgit v1.2.3-70-g09d2 From 10ce0473e0de3ff8c091735f85c20fceace061cd Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 3 Aug 2012 10:08:12 +0530 Subject: spi/s3c64xx: Add missing static storage class specifiers Silences the following sparse warnings: drivers/spi/spi-s3c64xx.c:1482:32: warning: symbol 's3c2443_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1489:32: warning: symbol 's3c6410_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1495:32: warning: symbol 's5p64x0_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1501:32: warning: symbol 's5pc100_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1508:32: warning: symbol 's5pv210_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1515:32: warning: symbol 'exynos4_spi_port_config' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown --- drivers/spi/spi-s3c64xx.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 646a7657fe6..5ed1a76636c 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1479,40 +1479,40 @@ static const struct dev_pm_ops s3c64xx_spi_pm = { s3c64xx_spi_runtime_resume, NULL) }; -struct s3c64xx_spi_port_config s3c2443_spi_port_config = { +static struct s3c64xx_spi_port_config s3c2443_spi_port_config = { .fifo_lvl_mask = { 0x7f }, .rx_lvl_offset = 13, .tx_st_done = 21, .high_speed = true, }; -struct s3c64xx_spi_port_config s3c6410_spi_port_config = { +static struct s3c64xx_spi_port_config s3c6410_spi_port_config = { .fifo_lvl_mask = { 0x7f, 0x7F }, .rx_lvl_offset = 13, .tx_st_done = 21, }; -struct s3c64xx_spi_port_config s5p64x0_spi_port_config = { +static struct s3c64xx_spi_port_config s5p64x0_spi_port_config = { .fifo_lvl_mask = { 0x1ff, 0x7F }, .rx_lvl_offset = 15, .tx_st_done = 25, }; -struct s3c64xx_spi_port_config s5pc100_spi_port_config = { +static struct s3c64xx_spi_port_config s5pc100_spi_port_config = { .fifo_lvl_mask = { 0x7f, 0x7F }, .rx_lvl_offset = 13, .tx_st_done = 21, .high_speed = true, }; -struct s3c64xx_spi_port_config s5pv210_spi_port_config = { +static struct s3c64xx_spi_port_config s5pv210_spi_port_config = { .fifo_lvl_mask = { 0x1ff, 0x7F }, .rx_lvl_offset = 15, .tx_st_done = 25, .high_speed = true, }; -struct s3c64xx_spi_port_config exynos4_spi_port_config = { +static struct s3c64xx_spi_port_config exynos4_spi_port_config = { .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F }, .rx_lvl_offset = 15, .tx_st_done = 25, -- cgit v1.2.3-70-g09d2 From 37a2d84a38df16e614bbfbb18a5155ebd8256938 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Thu, 2 Aug 2012 16:41:25 +0530 Subject: spi: omap2-mcspi: Fix the error handling in probe The kfree() is taken care of by the spi core (spi_master_release() function) that is called once the last reference to the underlying struct device has been released. So the driver need not call kfree. Also the put was missed in some of the error handling fix the same. There by fixing the missing device_put in some of the error paths. Acked-by: Guenter Roeck Reported-by: Guenter Roeck Signed-off-by: Shubhrajyoti D Signed-off-by: Mark Brown --- drivers/spi/spi-omap2-mcspi.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index bc4778175e3..b2fb141da37 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1228,18 +1228,16 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) status = spi_register_master(master); if (status < 0) - goto err_spi_register; + goto disable_pm; return status; -err_spi_register: - spi_master_put(master); disable_pm: pm_runtime_disable(&pdev->dev); dma_chnl_free: kfree(mcspi->dma_channels); free_master: - kfree(master); + spi_master_put(master); platform_set_drvdata(pdev, NULL); return status; } -- cgit v1.2.3-70-g09d2 From 439793d4b3c99e550daebd868bbd58967c93d0b3 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 1 Aug 2012 17:01:42 +0300 Subject: KVM: x86: update KVM_SAVE_MSRS_BEGIN to correct value When MSR_KVM_PV_EOI_EN was added to msrs_to_save array KVM_SAVE_MSRS_BEGIN was not updated accordingly. Signed-off-by: Gleb Natapov Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 42bce48f692..dce75b76031 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -806,7 +806,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc); * kvm-specific. Those are put in the beginning of the list. */ -#define KVM_SAVE_MSRS_BEGIN 9 +#define KVM_SAVE_MSRS_BEGIN 10 static u32 msrs_to_save[] = { MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK, MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW, -- cgit v1.2.3-70-g09d2 From d796c52ef0b71a988364f6109aeb63d79c5b116b Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 5 Aug 2012 19:04:57 -0400 Subject: ext4: make sure the journal sb is written in ext4_clear_journal_err() After we transfer set the EXT4_ERROR_FS bit in the file system superblock, it's not enough to call jbd2_journal_clear_err() to clear the error indication from journal superblock --- we need to call jbd2_journal_update_sb_errno() as well. Otherwise, when the root file system is mounted read-only, the journal is replayed, and the error indicator is transferred to the superblock --- but the s_errno field in the jbd2 superblock is left set (since although we cleared it in memory, we never flushed it out to disk). This can end up confusing e2fsck. We should make e2fsck more robust in this case, but the kernel shouldn't be leaving things in this confused state, either. Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/super.c | 1 + fs/jbd2/journal.c | 3 ++- include/linux/jbd2.h | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index d76ec8277d3..ccc4bcad561 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -4430,6 +4430,7 @@ static void ext4_clear_journal_err(struct super_block *sb, ext4_commit_super(sb, 1); jbd2_journal_clear_err(journal); + jbd2_journal_update_sb_errno(journal); } } diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index e9a3c4c8559..bd23f2ebaa6 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1377,7 +1377,7 @@ static void jbd2_mark_journal_empty(journal_t *journal) * Update a journal's errno. Write updated superblock to disk waiting for IO * to complete. */ -static void jbd2_journal_update_sb_errno(journal_t *journal) +void jbd2_journal_update_sb_errno(journal_t *journal) { journal_superblock_t *sb = journal->j_superblock; @@ -1390,6 +1390,7 @@ static void jbd2_journal_update_sb_errno(journal_t *journal) jbd2_write_superblock(journal, WRITE_SYNC); } +EXPORT_SYMBOL(jbd2_journal_update_sb_errno); /* * Read the superblock for a given journal, performing initial diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index f334c7fab96..3efc43f3f16 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1125,6 +1125,7 @@ extern int jbd2_journal_destroy (journal_t *); extern int jbd2_journal_recover (journal_t *journal); extern int jbd2_journal_wipe (journal_t *, int); extern int jbd2_journal_skip_recovery (journal_t *); +extern void jbd2_journal_update_sb_errno(journal_t *); extern void jbd2_journal_update_sb_log_tail (journal_t *, tid_t, unsigned long, int); extern void __jbd2_journal_abort_hard (journal_t *); -- cgit v1.2.3-70-g09d2 From 7e731bc9a12339f344cddf82166b82633d99dd86 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 5 Aug 2012 23:28:16 -0400 Subject: ext4: avoid kmemcheck complaint from reading uninitialized memory Commit 03179fe923 introduced a kmemcheck complaint in ext4_da_get_block_prep() because we save and restore ei->i_da_metadata_calc_last_lblock even though it is left uninitialized in the case where i_da_metadata_calc_len is zero. This doesn't hurt anything, but silencing the kmemcheck complaint makes it easier for people to find real bugs. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=45631 (which is marked as a regression). Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- fs/ext4/super.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index ccc4bcad561..56bcaec9149 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -959,6 +959,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb) ei->i_reserved_meta_blocks = 0; ei->i_allocated_meta_blocks = 0; ei->i_da_metadata_calc_len = 0; + ei->i_da_metadata_calc_last_lblock = 0; spin_lock_init(&(ei->i_block_reservation_lock)); #ifdef CONFIG_QUOTA ei->i_reserved_quota = 0; -- cgit v1.2.3-70-g09d2 From 61c964ba1748e984cb232b431582815899bf10fe Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Tue, 10 Jul 2012 14:07:38 -0500 Subject: Bluetooth: btusb: Add vendor specific ID (0a5c:21f4) BCM20702A0 Patch adds support for BCM20702A0 device id (0a5c:21f4). usb-devices after patch was applied: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21f4 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DF154D6 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) usb-devices before patch was applied: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21f4 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DF154D6 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Manoj Iyer Tested-by: Chris Gagnon Signed-off-by: Gustavo Padovan --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index e2722141103..da6aa390d95 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -98,6 +98,7 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE(0x0a5c, 0x21e6) }, { USB_DEVICE(0x0a5c, 0x21e8) }, { USB_DEVICE(0x0a5c, 0x21f3) }, + { USB_DEVICE(0x0a5c, 0x21f4) }, { USB_DEVICE(0x413c, 0x8197) }, /* Foxconn - Hon Hai */ -- cgit v1.2.3-70-g09d2 From 269c4845d5b3627b95b1934107251bacbe99bb68 Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Fri, 15 Jun 2012 02:30:20 -0300 Subject: Bluetooth: Fix possible deadlock in SCO code sco_chan_del() only has conn != NULL when called from sco_conn_del() so just move the code from it that deal with conn to sco_conn_del(). [ 120.765529] [ 120.765529] ====================================================== [ 120.766529] [ INFO: possible circular locking dependency detected ] [ 120.766529] 3.5.0-rc1-10292-g3701f94-dirty #70 Tainted: G W [ 120.766529] ------------------------------------------------------- [ 120.766529] kworker/u:3/1497 is trying to acquire lock: [ 120.766529] (&(&conn->lock)->rlock#2){+.+...}, at: [] sco_chan_del+0x4c/0x170 [bluetooth] [ 120.766529] [ 120.766529] but task is already holding lock: [ 120.766529] (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}, at: [] sco_conn_del+0x61/0xe0 [bluetooth] [ 120.766529] [ 120.766529] which lock already depends on the new lock. [ 120.766529] [ 120.766529] [ 120.766529] the existing dependency chain (in reverse order) is: [ 120.766529] [ 120.766529] -> #1 (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}: [ 120.766529] [] lock_acquire+0x8e/0xb0 [ 120.766529] [] _raw_spin_lock+0x40/0x80 [ 120.766529] [] sco_connect_cfm+0x79/0x300 [bluetooth] [ 120.766529] [] hci_sync_conn_complete_evt.isra.90+0x343/0x400 [bluetooth] [ 120.766529] [] hci_event_packet+0x317/0xfb0 [bluetooth] [ 120.766529] [] hci_rx_work+0x2c8/0x890 [bluetooth] [ 120.766529] [] process_one_work+0x197/0x460 [ 120.766529] [] worker_thread+0x126/0x2d0 [ 120.766529] [] kthread+0x9d/0xb0 [ 120.766529] [] kernel_thread_helper+0x4/0x10 [ 120.766529] [ 120.766529] -> #0 (&(&conn->lock)->rlock#2){+.+...}: [ 120.766529] [] __lock_acquire+0x154a/0x1d30 [ 120.766529] [] lock_acquire+0x8e/0xb0 [ 120.766529] [] _raw_spin_lock+0x40/0x80 [ 120.766529] [] sco_chan_del+0x4c/0x170 [bluetooth] [ 120.766529] [] sco_conn_del+0x74/0xe0 [bluetooth] [ 120.766529] [] sco_disconn_cfm+0x32/0x60 [bluetooth] [ 120.766529] [] hci_disconn_complete_evt.isra.53+0x242/0x390 [bluetooth] [ 120.766529] [] hci_event_packet+0x617/0xfb0 [bluetooth] [ 120.766529] [] hci_rx_work+0x2c8/0x890 [bluetooth] [ 120.766529] [] process_one_work+0x197/0x460 [ 120.766529] [] worker_thread+0x126/0x2d0 [ 120.766529] [] kthread+0x9d/0xb0 [ 120.766529] [] kernel_thread_helper+0x4/0x10 [ 120.766529] [ 120.766529] other info that might help us debug this: [ 120.766529] [ 120.766529] Possible unsafe locking scenario: [ 120.766529] [ 120.766529] CPU0 CPU1 [ 120.766529] ---- ---- [ 120.766529] lock(slock-AF_BLUETOOTH-BTPROTO_SCO); [ 120.766529] lock(&(&conn->lock)->rlock#2); [ 120.766529] lock(slock-AF_BLUETOOTH-BTPROTO_SCO); [ 120.766529] lock(&(&conn->lock)->rlock#2); [ 120.766529] [ 120.766529] *** DEADLOCK *** Signed-off-by: Gustavo Padovan --- net/bluetooth/sco.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 40bbe25dcff..3589e21edb0 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -131,6 +131,15 @@ static int sco_conn_del(struct hci_conn *hcon, int err) sco_sock_clear_timer(sk); sco_chan_del(sk, err); bh_unlock_sock(sk); + + sco_conn_lock(conn); + conn->sk = NULL; + sco_pi(sk)->conn = NULL; + sco_conn_unlock(conn); + + if (conn->hcon) + hci_conn_put(conn->hcon); + sco_sock_kill(sk); } @@ -821,16 +830,6 @@ static void sco_chan_del(struct sock *sk, int err) BT_DBG("sk %p, conn %p, err %d", sk, conn, err); - if (conn) { - sco_conn_lock(conn); - conn->sk = NULL; - sco_pi(sk)->conn = NULL; - sco_conn_unlock(conn); - - if (conn->hcon) - hci_conn_put(conn->hcon); - } - sk->sk_state = BT_CLOSED; sk->sk_err = err; sk->sk_state_change(sk); -- cgit v1.2.3-70-g09d2 From a9ea3ed9b71cc3271dd59e76f65748adcaa76422 Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Thu, 19 Jul 2012 14:46:08 +0200 Subject: Bluetooth: Fix legacy pairing with some devices Some devices e.g. some Android based phones don't do SDP search before pairing and cancel legacy pairing when ACL is disconnected. PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT is only received after remote user entered PIN. In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT (2 seconds) is being used to timeout ACL connection. This results in problems with legacy pairing as remote user has only few seconds to enter PIN before ACL is disconnected. Increase disconnect timeout for incomming connection to HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists. To avoid keeping ACL alive for too long after SDP search set ACL timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected. 2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8 status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01 Role: Slave 2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00 2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 42 2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 bdaddr 00:02:72:D6:6A:3F mode 0 2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3 handle 42 slots 5 2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0 2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 1 2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 42 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 42 page 1 2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 42 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000 2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0' 2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 42 2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 status 0x00 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3 status 0x13 handle 42 Error: Remote User Terminated Connection 2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 42 reason 0x13 Reason: Remote User Terminated Connection Cc: stable@vger.kernel.org Signed-off-by: Szymon Janc Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 7 ++++++- net/bluetooth/l2cap_core.c | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 41ff978a33f..248632cec11 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1762,7 +1762,12 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) if (conn->type == ACL_LINK) { conn->state = BT_CONFIG; hci_conn_hold(conn); - conn->disc_timeout = HCI_DISCONN_TIMEOUT; + + if (!conn->out && !hci_conn_ssp_enabled(conn) && + !hci_find_link_key(hdev, &ev->bdaddr)) + conn->disc_timeout = HCI_PAIRING_TIMEOUT; + else + conn->disc_timeout = HCI_DISCONN_TIMEOUT; } else conn->state = BT_CONNECTED; diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index a8964db04bf..daa149b7003 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -1181,6 +1181,7 @@ static void l2cap_le_conn_ready(struct l2cap_conn *conn) sk = chan->sk; hci_conn_hold(conn->hcon); + conn->hcon->disc_timeout = HCI_DISCONN_TIMEOUT; bacpy(&bt_sk(sk)->src, conn->src); bacpy(&bt_sk(sk)->dst, conn->dst); -- cgit v1.2.3-70-g09d2 From c810089c27e48b816181b454fcc493d19fdbc2ba Mon Sep 17 00:00:00 2001 From: Ram Malovany Date: Thu, 19 Jul 2012 10:26:09 +0300 Subject: Bluetooth: Fix using NULL inquiry entry If entry wasn't found in the hci_inquiry_cache_lookup_resolve do not resolve the name.This will fix a kernel crash when trying to use NULL pointer. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 248632cec11..b64cfa213bd 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1365,6 +1365,9 @@ static bool hci_resolve_next_name(struct hci_dev *hdev) return false; e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, NAME_NEEDED); + if (!e) + return false; + if (hci_resolve_name(hdev, e) == 0) { e->name_state = NAME_PENDING; return true; -- cgit v1.2.3-70-g09d2 From 7cc8380eb10347016d95bf6f9d842c2ae6d12932 Mon Sep 17 00:00:00 2001 From: Ram Malovany Date: Thu, 19 Jul 2012 10:26:10 +0300 Subject: Bluetooth: Fix using a NULL inquiry cache entry If the device was not found in a list of found devices names of which are pending.This may happen in a case when HCI Remote Name Request was sent as a part of incoming connection establishment procedure. Hence there is no need to continue resolving a next name as it will be done upon receiving another Remote Name Request Complete Event. This will fix a kernel crash when trying to use this entry to resolve the next name. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index b64cfa213bd..fe9a3d6d30b 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1396,12 +1396,18 @@ static void hci_check_pending_name(struct hci_dev *hdev, struct hci_conn *conn, return; e = hci_inquiry_cache_lookup_resolve(hdev, bdaddr, NAME_PENDING); - if (e) { + /* If the device was not found in a list of found devices names of which + * are pending. there is no need to continue resolving a next name as it + * will be done upon receiving another Remote Name Request Complete + * Event */ + if (!e) + return; + + list_del(&e->list); + if (name) { e->name_state = NAME_KNOWN; - list_del(&e->list); - if (name) - mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00, - e->data.rssi, name, name_len); + mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00, + e->data.rssi, name, name_len); } if (hci_resolve_next_name(hdev)) -- cgit v1.2.3-70-g09d2 From c3e7c0d90b14a3e7ac091d24cef09efb516d587b Mon Sep 17 00:00:00 2001 From: Ram Malovany Date: Thu, 19 Jul 2012 10:26:11 +0300 Subject: Bluetooth: Set name_state to unknown when entry name is empty When the name of the given entry is empty , the state needs to be updated accordingly. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index fe9a3d6d30b..715d7e33fba 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1408,6 +1408,8 @@ static void hci_check_pending_name(struct hci_dev *hdev, struct hci_conn *conn, e->name_state = NAME_KNOWN; mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00, e->data.rssi, name, name_len); + } else { + e->name_state = NAME_NOT_KNOWN; } if (hci_resolve_next_name(hdev)) -- cgit v1.2.3-70-g09d2 From d08fd0e712a834d4abb869c0215a702e290bc51e Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 19 Jul 2012 17:03:43 +0300 Subject: Bluetooth: smp: Fix possible NULL dereference smp_chan_create might return NULL so we need to check before dereferencing smp. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- net/bluetooth/smp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 16ef0dc85a0..901a616c808 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -579,8 +579,11 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb) if (!test_and_set_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) smp = smp_chan_create(conn); + else + smp = conn->smp_chan; - smp = conn->smp_chan; + if (!smp) + return SMP_UNSPECIFIED; smp->preq[0] = SMP_CMD_PAIRING_REQ; memcpy(&smp->preq[1], req, sizeof(*req)); -- cgit v1.2.3-70-g09d2 From 49dfbb9129c4edb318578de35cc45c555df37884 Mon Sep 17 00:00:00 2001 From: Jaganath Kanakkassery Date: Thu, 19 Jul 2012 12:54:04 +0530 Subject: Bluetooth: Fix socket not getting freed if l2cap channel create fails If l2cap_chan_create() fails then it will return from l2cap_sock_kill since zapped flag of sk is reset. Signed-off-by: Jaganath Kanakkassery Signed-off-by: Gustavo Padovan --- net/bluetooth/l2cap_sock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index a4bb27e8427..b94abd30e6f 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -1174,7 +1174,7 @@ static struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock, int p chan = l2cap_chan_create(); if (!chan) { - l2cap_sock_kill(sk); + sk_free(sk); return NULL; } -- cgit v1.2.3-70-g09d2 From 2096ae6ca647302d50a68aa36cb66a00e7dfac70 Mon Sep 17 00:00:00 2001 From: Peng Chen Date: Wed, 1 Aug 2012 10:11:59 +0800 Subject: Bluetooth: add support for atheros 0489:e057 Add support for the AR3012 chip found on Fioxconn. usb-devices shows: T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 44 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e057 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Peng Chen Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 10308cd8a7e..11f36e50213 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -79,6 +79,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, + { USB_DEVICE(0x0489, 0xe057) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -104,6 +105,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index da6aa390d95..cef3bac1a54 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -134,6 +134,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3-70-g09d2 From c31cc1b764b6efb713601d351c1a879c042eab34 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Mon, 6 Aug 2012 23:22:15 +0300 Subject: Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846" 1) The above commit introduced a common ->get_pendown_state() function into the generic code, but that function was board-specific for the OMAP3EVM and thus broke most other boards using this code. 2) The above commit was mis-merged introducing another bug which prevents the ads7846 driver probe function to succeed. The omap_ads7846_init() function frees the pendown GPIO in case there is no ->get_pendown_state() function set by the caller (board specific code), so it can be requested later by the ads7846 driver. The above commit add a common ->get_pendown_state() function without removing the gpio_free() call and thus once the ads7846 driver tries to use the pendown GPIO, it crashes as the pendown GPIO has not been requested. 3) The above commit introduces NO new functionality as get_pendown_state() function is already implemented in a suitable way by the ads7846 driver and the debounce time handling has already been fixed by commit 97ee9f01 (ARM: OMAP: fix the ads7846 init code). This reverts commit 16aced80f6739beb2a6ff7b6f96c83ba80d331e8. Conflicts: arch/arm/mach-omap2/common-board-devices.c Solved by taking the working version prior to the above commit. Cc: Zumeng Chen Cc: Arnd Bergmann Signed-off-by: Igor Grinberg Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/board-omap3evm.c | 1 + arch/arm/mach-omap2/common-board-devices.c | 11 ----------- arch/arm/mach-omap2/common-board-devices.h | 1 - 3 files changed, 1 insertion(+), 12 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0eb5e..0d362e9f9cb 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -58,6 +58,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 14734746457..c1875862679 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a6166..a0b4a42836a 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; -- cgit v1.2.3-70-g09d2 From a71eb61c9d077ec5019b35da6c883d67fc43d002 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 10 Jul 2012 03:57:32 +0200 Subject: ARM: OMAP3: igep0020: set GPIO mode for mux mcspi1_cs2 pin According to the IGEPv2 Rev.C data-sheet the LAN9221i pin 14 (IRQ) is connected to the OMAP3730 mcspi1_cs2 pin. Since this omap mux pin acts as an IRQ line, it has to be configured as an input GPIO. IGEPv2 platform code sets the smsc911x_cfg->gpio_irq to GPIO 176 but since the mux pin default mode is MODE7 (safe_mode) the driver fails when trying to register the IRQ with the following error message: [ 1.994598] smsc911x: Driver version 2008-10-21 [ 3.704162] irq 272: nobody cared (try booting with the "irqpoll" option) [ 3.711364] [] (unwind_backtrace+0x0/0xf0) from [] (__report_bad_irq+0x20/0xbc) [ 3.720916] [] (__report_bad_irq+0x20/0xbc) from [] (note_interrupt+0x1d8/0x238) [ 3.730560] [] (note_interrupt+0x1d8/0x238) from [] (handle_irq_event_percpu+0xc0/0x260) [ 3.740936] [] (handle_irq_event_percpu+0xc0/0x260) from [] (handle_irq_event+0x3c/0x5c) [ 3.751312] [] (handle_irq_event+0x3c/0x5c) from [] (handle_level_irq+0xac/0x10c) [ 3.761047] [] (handle_level_irq+0xac/0x10c) from [] (generic_handle_irq+0x30/0x48) [ 3.770935] [] (generic_handle_irq+0x30/0x48) from [] (gpio_irq_handler+0x180/0x1d4) [ 3.780944] [] (gpio_irq_handler+0x180/0x1d4) from [] (generic_handle_irq+0x30/0x48) [ 3.790954] [] (generic_handle_irq+0x30/0x48) from [] (handle_IRQ+0x4c/0xac) [ 3.800231] [] (handle_IRQ+0x4c/0xac) from [] (omap3_intc_handle_irq+0x60/0x74) [ 3.809783] [] (omap3_intc_handle_irq+0x60/0x74) from [] (__irq_svc+0x44/0x60) [ 3.819213] Exception stack(0xee42fde0 to 0xee42fe28) [ 3.824554] fde0: 00000001 00000001 00000000 00000000 60000013 c06cce14 c06cce14 00000110 [ 3.833190] fe00: 00000000 c06ccdf4 60000013 ee41d000 fb058064 ee42fe28 c0089e08 c04976b4 [ 3.841796] fe20: 20000013 ffffffff [ 3.845489] [] (__irq_svc+0x44/0x60) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 3.855499] [] (_raw_spin_unlock_irqrestore+0x34/0x44) from [] (__setup_irq+0x1b8/0x3f0) [ 3.865875] [] (__setup_irq+0x1b8/0x3f0) from [] (request_threaded_irq+0xb8/0x140) [ 3.875701] [] (request_threaded_irq+0xb8/0x140) from [] (smsc911x_drv_probe+0x75c/0x11a4) [ 3.886260] [] (smsc911x_drv_probe+0x75c/0x11a4) from [] (platform_drv_probe+0x18/0x1c) [ 3.906707] [] (driver_probe_device+0x90/0x210) from [] (__driver_attach+0x94/0x98) [ 3.916625] [] (__driver_attach+0x94/0x98) from [] (bus_for_each_dev+0x50/0x7c) [ 3.926177] [] (bus_for_each_dev+0x50/0x7c) from [] (bus_add_driver+0x184/0x248) [ 3.935821] [] (bus_add_driver+0x184/0x248) from [] (driver_register+0x78/0x12c) [ 3.945465] [] (driver_register+0x78/0x12c) from [] (do_one_initcall+0x34/0x178) [ 3.955108] [] (do_one_initcall+0x34/0x178) from [] (kernel_init+0xfc/0x1c0) [ 3.964385] [] (kernel_init+0xfc/0x1c0) from [] (kernel_thread_exit+0x0/0x8) [ 3.973632] handlers: [ 3.976043] [] smsc911x_irqhandler [ 3.980560] Disabling IRQ #272 Signed-off-by: Javier Martinez Canillas Acked-by: Enric Balletbo i Serra Tested-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-igep0020.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 74915295482..28214483aab 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ + OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif -- cgit v1.2.3-70-g09d2 From 5f789ebcbc06ff02a53d54f1602e36c9da30dd4c Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Wed, 4 Jul 2012 18:00:37 +0530 Subject: arm/dts: Fix am33xx wdt node Add am33xx wdt node. Signed-off-by: Afzal Mohammed [tony@atomide.com: I messed up and produced an empty commit db27ac80 with stg apply] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e..bd0cff3f808 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; -- cgit v1.2.3-70-g09d2 From acb11fe80a27f4b30fd38be6e6e35a0abc395401 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 13 Jul 2012 16:15:07 +0530 Subject: OMAP2+: Fix random config build break with !ARM_CPU_SUSPEND The random config builds with PM and !ARM_CPU_SUSPEND breaks with below error on omap2plus_defconfig. arch/arm/mach-omap2/sleep44xx.S:323: undefined reference to `cpu_resume' arch/arm/mach-omap2/omap-mpuss-lowpower.c:278: undefined reference to `cpu_suspend' This is because recently merged OMAP5 platform shares the common files with OMAP4 but doesn't select ARM_CPU_SUSPEND. Without the ARM_CPU_SUSPEND the sleep code is meaningless. Fix the same by adding ARM_CPU_SUSPEND for OMAP5. The suggestion came from Russell King in an off-list discussion. Cc: Russell King Cc: Kevin Hilman Reported-by: Tony Lindgren Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db025f77..4a4d058ed14 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -69,6 +69,7 @@ config SOC_OMAP5 select CPU_V7 select ARM_GIC select HAVE_SMP + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 -- cgit v1.2.3-70-g09d2 From ae377aaf98630de03e58fffdf3f35dec3d0ca5e0 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 30 Jul 2012 18:42:19 +0530 Subject: arm/dts: Mark vcxio, v2v1 and v1v8 regulators as always on vcxio, v2v1 and v1v8 are expected to be always on, update the dtsi for twl6030 to reflect this. commit '86f5fc' regulator: core: Mark all DT based boards as having full constraints) caused these to be disabled at late boot causing OMAP4 boards (using twl6030) to lockup. Reported-by: Kishon Vijay Abraham I Reported-by: J Keerthy Signed-off-by: Rajendra nayak Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/twl6030.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f3510d7e..d351b27d721 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -66,6 +66,7 @@ vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; vusb: regulator@9 { @@ -74,10 +75,12 @@ v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; clk32kg: regulator@12 { -- cgit v1.2.3-70-g09d2 From 128aa925ee7e9aa84943ce64df48192b92a81767 Mon Sep 17 00:00:00 2001 From: Domenico Andreoli Date: Sat, 14 Jul 2012 22:49:54 +0200 Subject: OMAP: remove unused parameter arch_id from uncompress.h There is not point in having arch_id as parameter of __arch_decomp_setup(), nothing in it uses arch_id. The machine id is already exported (and used) with symbol __machine_arch_type as per mach-types.h. Removing the pointless macro as well. Signed-off-by: Domenico Andreoli Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/uncompress.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a13678..7f7b112accc 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ -- cgit v1.2.3-70-g09d2 From 36b547aa20d1cf0d62bace7b8a9928aa33de36cd Mon Sep 17 00:00:00 2001 From: Michael Jones Date: Thu, 26 Jul 2012 17:44:44 +0200 Subject: omap2: mux: remove comment for nonexistent member remove comment for nonexistent member Signed-off-by: Michael Jones Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a74a1..76f9b3c2f58 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; -- cgit v1.2.3-70-g09d2 From d0db84e713eaaccea2a435e1625fb3150b335f4a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 7 Aug 2012 15:37:47 +0300 Subject: ASoC: omap-mcbsp: Fix 6pin mux configuration The check for the mux_signal callback was wrong which prevents us to configure the 6pin port's FSR/CLKR signal mux. Reported-by: CF Adad Signed-off-by: Peter Ujfalusi Acked-by: Jarkko Nikula Signed-off-by: Mark Brown Cc: stable@vger.kernel.org (3.4+) --- sound/soc/omap/mcbsp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c index 34835e8a916..d33c48baaf7 100644 --- a/sound/soc/omap/mcbsp.c +++ b/sound/soc/omap/mcbsp.c @@ -745,7 +745,7 @@ int omap_mcbsp_6pin_src_mux(struct omap_mcbsp *mcbsp, u8 mux) { const char *signal, *src; - if (mcbsp->pdata->mux_signal) + if (!mcbsp->pdata->mux_signal) return -EINVAL; switch (mux) { -- cgit v1.2.3-70-g09d2 From a5f8ae2154eeb7ed18c6e3dbf6ac095ea4c3d5cf Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 18 Jul 2012 12:30:11 +0800 Subject: regulator: palmas: Fix calculating selector in palmas_map_voltage_ldo This patch fixes below issues when choosing selector: 1. Current code returns negative selector if min_uV < 900000 which is wrong. For example, it is possible to satisfy the request with selector = 1 if the requested min_uV is 850000. 2. Current code may select a voltage lower than requested min_uV. For example, if the requested min_uV is 945000, current code chooses selector = 1 which is lower than requested min_uV. DIV_ROUND_UP to avoid this case. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 17d19fbbc49..0fcf3550f65 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -486,9 +486,12 @@ static int palmas_map_voltage_ldo(struct regulator_dev *rdev, { int ret, voltage; - ret = ((min_uV - 900000) / 50000) + 1; - if (ret < 0) - return ret; + if (min_uV == 0) + return 0; + + if (min_uV < 900000) + min_uV = 900000; + ret = DIV_ROUND_UP(min_uV - 900000, 50000) + 1; /* Map back into a voltage to verify we're still in bounds */ voltage = palmas_list_voltage_ldo(rdev, ret); -- cgit v1.2.3-70-g09d2 From 12565b166dab7966c2991c1561f3c22e9dad5535 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 18 Jul 2012 12:31:03 +0800 Subject: regulator: palmas: Fix regmap offsets for PALMAS_REG_SMPS10 vsel_reg Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 0fcf3550f65..9e3e7f3c408 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -679,7 +679,9 @@ static __devinit int palmas_probe(struct platform_device *pdev) case PALMAS_REG_SMPS10: pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES; pmic->desc[id].ops = &palmas_ops_smps10; - pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL; + pmic->desc[id].vsel_reg = + PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, + PALMAS_SMPS10_CTRL); pmic->desc[id].vsel_mask = SMPS10_VSEL; pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, -- cgit v1.2.3-70-g09d2 From 2735daeb161d3eb1ba041158c21ac2a0e42da6a2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 18 Jul 2012 12:31:59 +0800 Subject: regulator: palmas: Call palmas_ldo_[read|write] in palmas_ldo_init Current code uses wrong calls palmas_smps_[read|write] in palmas_ldo_init(), should be palmas_ldo_[read|write] instead. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 9e3e7f3c408..de68347cbc6 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -589,7 +589,7 @@ static int palmas_ldo_init(struct palmas *palmas, int id, addr = palmas_regs_info[id].ctrl_addr; - ret = palmas_smps_read(palmas, addr, ®); + ret = palmas_ldo_read(palmas, addr, ®); if (ret) return ret; @@ -599,7 +599,7 @@ static int palmas_ldo_init(struct palmas *palmas, int id, if (reg_init->mode_sleep) reg |= PALMAS_LDO1_CTRL_MODE_SLEEP; - ret = palmas_smps_write(palmas, addr, reg); + ret = palmas_ldo_write(palmas, addr, reg); if (ret) return ret; -- cgit v1.2.3-70-g09d2 From 1c9d2d71a3cb0fcbfe91307b3c18d22f7d93f0cd Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 18 Jul 2012 12:33:20 +0800 Subject: regulator: palmas: Fix palmas_probe error handling Fix below error handling cases: 1. If reading PALMAS_SMPS_CTRL fails, simply returns ret rather than goto err_unregister_regulator because we have not call regulator_register(). 2. If palmas_ldo_init() fails, we need to call regulator_unregister() for the regulator we just successfully registered in this for loop iteration. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index de68347cbc6..46c7e88f838 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -633,7 +633,7 @@ static __devinit int palmas_probe(struct platform_device *pdev) ret = palmas_smps_read(palmas, PALMAS_SMPS_CTRL, ®); if (ret) - goto err_unregister_regulator; + return ret; if (reg & PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN) pmic->smps123 = 1; @@ -783,8 +783,10 @@ static __devinit int palmas_probe(struct platform_device *pdev) reg_init = pdata->reg_init[id]; if (reg_init) { ret = palmas_ldo_init(palmas, id, reg_init); - if (ret) + if (ret) { + regulator_unregister(pmic->rdev[id]); goto err_unregister_regulator; + } } } } -- cgit v1.2.3-70-g09d2 From 7f852e0584f67654060f7814149744a1b7250480 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 24 Jul 2012 13:48:00 +0530 Subject: regulator: tps6586x: correct vin pin for sm0/sm1/sm2 As per datasheet, the vin pin for the regulator is named as vin_sm0, vin_sm1, vin_sm2 for sm0, sm1 and sm2 respectively. Correcting the names in driver and documentation to match with datasheet. Signed-off-by: Laxman Dewangan Reported-by: Stephen Warren Acked-by: Stephen Warren Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/tps6586x.txt | 12 ++++++------ drivers/regulator/tps6586x-regulator.c | 8 +++++--- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index d156e1b5db1..da80c2ae091 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -9,9 +9,9 @@ Required properties: - regulators: list of regulators provided by this controller, must have property "regulator-compatible" to match their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc -- sm0-supply: The input supply for the SM0. -- sm1-supply: The input supply for the SM1. -- sm2-supply: The input supply for the SM2. +- vin-sm0-supply: The input supply for the SM0. +- vin-sm1-supply: The input supply for the SM1. +- vin-sm2-supply: The input supply for the SM2. - vinldo01-supply: The input supply for the LDO1 and LDO2 - vinldo23-supply: The input supply for the LDO2 and LDO3 - vinldo4-supply: The input supply for the LDO4 @@ -30,9 +30,9 @@ Example: #gpio-cells = <2>; gpio-controller; - sm0-supply = <&some_reg>; - sm1-supply = <&some_reg>; - sm2-supply = <&some_reg>; + vin-sm0-supply = <&some_reg>; + vin-sm1-supply = <&some_reg>; + vin-sm2-supply = <&some_reg>; vinldo01-supply = <...>; vinldo23-supply = <...>; vinldo4-supply = <...>; diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index e6da90ab515..19241fc3005 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -240,14 +240,16 @@ static struct tps6586x_regulator tps6586x_regulator[] = { TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7), TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1), - TPS6586X_LDO(SM_2, "sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), + TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6), TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6), - TPS6586X_DVM(SM_0, "sm0", dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2), - TPS6586X_DVM(SM_1, "sm1", dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0), + TPS6586X_DVM(SM_0, "vin-sm0", dvm, SM0V1, 0, 5, ENA, 1, + ENB, 1, VCC1, 2), + TPS6586X_DVM(SM_1, "vin-sm1", dvm, SM1V1, 0, 5, ENA, 0, + ENB, 0, VCC1, 0), }; /* -- cgit v1.2.3-70-g09d2 From 3e2a928472daa839e7be0d71c1d8320334ea76e1 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 17 Jul 2012 00:10:42 +0800 Subject: regulator: anatop: Fix wrong mask used in anatop_get_voltage_sel The mask used in anatop_get_voltage_sel does not match the mask used in anatop_set_voltage_sel. We need to do left shift anatop_reg->vol_bit_shift bits for the correct mask. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/anatop-regulator.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index e9c2085f9df..ce0fe72a428 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -64,14 +64,15 @@ static int anatop_set_voltage_sel(struct regulator_dev *reg, unsigned selector) static int anatop_get_voltage_sel(struct regulator_dev *reg) { struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); - u32 val; + u32 val, mask; if (!anatop_reg->control_reg) return -ENOTSUPP; val = anatop_read_reg(anatop_reg->mfd, anatop_reg->control_reg); - val = (val & ((1 << anatop_reg->vol_bit_width) - 1)) >> + mask = ((1 << anatop_reg->vol_bit_width) - 1) << anatop_reg->vol_bit_shift; + val = (val & mask) >> anatop_reg->vol_bit_shift; return val - anatop_reg->min_bit_val; } -- cgit v1.2.3-70-g09d2 From cfa9cfbc083c7fc882286dcfba59c7e5a1a15545 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 6 Aug 2012 17:11:40 +0200 Subject: regulator: ab3100: add missing voltage table The conversion to voltage tables in commit a3beb74261f26142019847128b2441b0301797ac "regulator: ab3100: Use regulator_list_voltage_table()" missed to add the voltage table to the buck. Fix this and it works like a charm. Signed-off-by: Linus Walleij Acked-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/ab3100.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index 182b553059c..c151fd5d8c9 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -486,6 +486,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = { .id = AB3100_BUCK, .ops = ®ulator_ops_variable_sleepable, .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages), + .volt_table = ldo_e_buck_typ_voltages, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_time = 1000, -- cgit v1.2.3-70-g09d2 From 22ceac191211cf6688b1bf6ecd93c8b6bf80ed9b Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 23 Jul 2012 16:06:08 -0700 Subject: xhci: Increase reset timeout for Renesas 720201 host. The NEC/Renesas 720201 xHCI host controller does not complete its reset within 250 milliseconds. In fact, it takes about 9 seconds to reset the host controller, and 1 second for the host to be ready for doorbell rings. Extend the reset and CNR polling timeout to 10 seconds each. This patch should be backported to kernels as old as 2.6.31, that contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci: BIOS handoff and HW initialization." Signed-off-by: Sarah Sharp Reported-by: Edwin Klein Mentink Cc: stable@vger.kernel.org --- drivers/usb/host/xhci.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7648b2d4b26..5c3a3f75e4d 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -166,7 +166,7 @@ int xhci_reset(struct xhci_hcd *xhci) xhci_writel(xhci, command, &xhci->op_regs->command); ret = handshake(xhci, &xhci->op_regs->command, - CMD_RESET, 0, 250 * 1000); + CMD_RESET, 0, 10 * 1000 * 1000); if (ret) return ret; @@ -175,7 +175,8 @@ int xhci_reset(struct xhci_hcd *xhci) * xHCI cannot write to any doorbells or operational registers other * than status until the "Controller Not Ready" flag is cleared. */ - ret = handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); + ret = handshake(xhci, &xhci->op_regs->status, + STS_CNR, 0, 10 * 1000 * 1000); for (i = 0; i < 2; ++i) { xhci->bus_state[i].port_c_suspend = 0; -- cgit v1.2.3-70-g09d2 From 5cb7df2b2d3afee7638b3ef23a5bcb89c6f07bd9 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 2 Jul 2012 13:36:23 -0700 Subject: xhci: Add Etron XHCI_TRUST_TX_LENGTH quirk. Gary reports that with recent kernels, he notices more xHCI driver warnings: xhci_hcd 0000:03:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? We think his Etron xHCI host controller may have the same buggy behavior as the Fresco Logic xHCI host. When a short transfer is received, the host will mark the transfer as successfully completed when it should be marking it with a short completion. Fix this by turning on the XHCI_TRUST_TX_LENGTH quirk when the Etron host is discovered. Note that Gary has revision 1, but if Etron fixes this bug in future revisions, the quirk will have no effect. This patch should be backported to kernels as old as 2.6.36, that contain a backported version of commit 1530bbc6272d9da1e39ef8e06190d42c13a02733 "xhci: Add new short TX quirk for Fresco Logic host." Signed-off-by: Sarah Sharp Reported-by: Gary E. Miller Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 18b231b0c5d..92eaff6097c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -99,6 +99,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_ASROCK_P67) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); + xhci->quirks |= XHCI_TRUST_TX_LENGTH; } if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; -- cgit v1.2.3-70-g09d2 From 8202ce2e2921941098aa72894ac5d7b486a9d273 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 25 Jul 2012 10:52:45 -0700 Subject: xhci: Rate-limit XHCI_TRUST_TX_LENGTH quirk warning. When we encounter an xHCI host that needs the XHCI_TRUST_TX_LENGTH quirk, the xHCI driver ends up spewing messages about the quirk into dmesg every time a short packet occurs. Change the xHCI driver to rate-limit such warnings. Signed-off-by: Sarah Sharp Reported-by: Matthew Hall Reported-by: Gary E. Miller --- drivers/usb/host/xhci-ring.c | 4 ++-- drivers/usb/host/xhci.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 8275645889d..0c93f5dcea6 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2073,8 +2073,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (xhci->quirks & XHCI_TRUST_TX_LENGTH) trb_comp_code = COMP_SHORT_TX; else - xhci_warn(xhci, "WARN Successful completion on short TX: " - "needs XHCI_TRUST_TX_LENGTH quirk?\n"); + xhci_warn_ratelimited(xhci, + "WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?\n"); case COMP_SHORT_TX: break; case COMP_STOP: diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 55c0785810c..96f49dbb50a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1537,6 +1537,8 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args) #define xhci_warn(xhci, fmt, args...) \ dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args) +#define xhci_warn_ratelimited(xhci, fmt, args...) \ + dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args) /* TODO: copied from ehci.h - can be refactored? */ /* xHCI spec says all registers are little endian */ -- cgit v1.2.3-70-g09d2 From 265a2bc84247c9b9e3bb4fe275f16ba99551a7e7 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 16 Jul 2012 16:56:15 -0700 Subject: ARM: OMAP3: TWL4030: ensure sys_nirq1 is mux'd and wakeup enabled The SYS_NIRQ1 pin is the interupt line for the PMIC part of the TWL6030 and interrupts from the PMIC are needed as wakeup sources. Ensure this pin is mux'd as input and has wakeup enabled so PMIC interupts (e.g. RTC) can be used as wakeup sources. Tested on 3430/n900, OMAP3530/Overo Fire, 3730/Overo FireSTORM, 3730/Beagle-xM. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/twl-common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f170ba5..db5ff664237 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; -- cgit v1.2.3-70-g09d2 From e0e29fd74c3c8bd2ef83bbaa73d528d58a944610 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 7 Aug 2012 11:28:06 -0700 Subject: Revert "ARM: OMAP3: PM: call pre/post transition per powerdomain" This reverts commit 58f0829b7186150318c79515f0e0850c5e7a9c89. Converstion to per-pwrdm per/post transition calls was a bit premature. Only tracking MPU, PER & CORE in the idle path means we lose the accounting for all the other powerdomains which may also transition in idle. On OMAP3, due to autodeps, several powerdomains transition along with MPU (e.g. DSS, USBHOST), and the accounting for these was lost with this patch. Since the accounting includes the context loss counters, drivers for devices in those power domains would never notice context lost, so would likely hang after any off-mode transitions. This patch should be revisited when the upcoming clkdm/pwrmdm/voltdm use-counting seires is merged since then we can properly do accounting without relying on a call in the idle path. In addition, the original patch had another bug because the PER powerdomain accounting was not updated until after the GPIO resume hook is called. Since gpio_resume_after_idle() checks the context loss count (which is not yet updated) it would not properly restore context, leaving the GPIO banks in an undefined state. Cc: Jean Pihet Cc: Tero Kristo Cc: Rajendra Nayak Reported-by: Paul Walmsley Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c65db..05bd8f02723 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) -- cgit v1.2.3-70-g09d2 From e1267371eacf2cbcf580e41f9e64a986cdaf5c1d Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 7 Aug 2012 19:11:33 +0900 Subject: ARM: S3C24XX: Add missing DMACH_DT_PROP Commit 2b90807549 (spi: s3c64xx: add device tree support) requires the DMACH_DT_PROP element in the dma_ch enum. It's not used on non-DT platforms but has to be present nevertheless. So mimic the dummy-add of DMACH_DT_PROP on s3c64xx for s3c24xx machines, to correct the build breakage for the s3c24xx variants using the s3c64xx-spi-driver. Signed-off-by: Heiko Stuebner Cc: Stable Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c24xx/include/mach/dma.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b6603..ee99fd56c04 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, -- cgit v1.2.3-70-g09d2 From b01858c7806e7e6f6121da2e51c9222fc4d21dc6 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 7 Aug 2012 19:12:05 +0900 Subject: ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters Commit d670ac019f60 (ARM: SAMSUNG: DMA Cleanup as per sparse) changed the prototype of the s3c2410_dma_* functions to use the enum dma_ch instead of an generic unsigned int. In the s3c24xx dma.c s3c2410_dma_enqueue seems to have been forgotten, the other functions there were changed correctly. Signed-off-by: Heiko Stuebner Cc: Stable Signed-off-by: Kukjin Kim --- arch/arm/plat-s3c24xx/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f7538..db98e7021f0 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); -- cgit v1.2.3-70-g09d2 From c0401241c01705205ed6f2b88460df1133591f58 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 7 Aug 2012 19:17:14 +0900 Subject: ARM: Samsung: Make uart_save static in pm.c file Fixes the following sparse warning: arch/arm/plat-samsung/pm.c:77:21: warning: symbol 'uart_save' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 64ab65f0fdb..15070284343 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { -- cgit v1.2.3-70-g09d2 From 8258d3923c7d8f9a28c43612c3f91c7b9d61191b Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 20 Jul 2012 10:31:43 -0700 Subject: staging: comedi: remove pci_is_enabled() tests As mentioned by Ian Abbott, the comedi pci drivers that try to locate an unused pci device with the pci_is_enabled() test might actually skip over a perfectly good unused device. This test is also not consistent with the other comedi pci drivers. Remove the test from all the comedi pci drivers. Reported-by: Ian Abbott Signed-off-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/adv_pci1710.c | 3 --- drivers/staging/comedi/drivers/adv_pci1723.c | 2 -- drivers/staging/comedi/drivers/adv_pci_dio.c | 2 -- 3 files changed, 7 deletions(-) diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c index 31986608eaf..6b4d0d68e63 100644 --- a/drivers/staging/comedi/drivers/adv_pci1710.c +++ b/drivers/staging/comedi/drivers/adv_pci1710.c @@ -1349,9 +1349,6 @@ static struct pci_dev *pci1710_find_pci_dev(struct comedi_device *dev, } if (pcidev->vendor != PCI_VENDOR_ID_ADVANTECH) continue; - if (pci_is_enabled(pcidev)) - continue; - if (strcmp(this_board->name, DRV_NAME) == 0) { for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) { if (pcidev->device == boardtypes[i].device_id) { diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c index da5ee69d2c9..dfde0f6328d 100644 --- a/drivers/staging/comedi/drivers/adv_pci1723.c +++ b/drivers/staging/comedi/drivers/adv_pci1723.c @@ -301,8 +301,6 @@ static struct pci_dev *pci1723_find_pci_dev(struct comedi_device *dev, } if (pcidev->vendor != PCI_VENDOR_ID_ADVANTECH) continue; - if (pci_is_enabled(pcidev)) - continue; return pcidev; } dev_err(dev->class_dev, diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c index 97f06dc8e48..2d4cb7f638b 100644 --- a/drivers/staging/comedi/drivers/adv_pci_dio.c +++ b/drivers/staging/comedi/drivers/adv_pci_dio.c @@ -1064,8 +1064,6 @@ static struct pci_dev *pci_dio_find_pci_dev(struct comedi_device *dev, slot != PCI_SLOT(pcidev->devfn)) continue; } - if (pci_is_enabled(pcidev)) - continue; for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) { if (boardtypes[i].vendor_id != pcidev->vendor) continue; -- cgit v1.2.3-70-g09d2 From 7e8401b23e7fd4f585b0fcb62d0895487d5f11d6 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 20 Jul 2012 10:32:10 -0700 Subject: staging: comedi: daqboard2000: add back subsystem_device check As mentioned by Ian Abbott, this driver originally checked the pci_dev subsystem_device in order to make sure that the pci_dev was compatible with this driver. The cleanup of the "find pci device" code removed this check. Add it back. Reported-by: Ian Abbott Signed-off-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/daqboard2000.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index ef28385c148..7236cbe87e2 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -718,7 +718,8 @@ static struct pci_dev *daqboard2000_find_pci_dev(struct comedi_device *dev, continue; } if (pcidev->vendor != PCI_VENDOR_ID_IOTECH || - pcidev->device != 0x0409) + pcidev->device != 0x0409 || + pcidev->subsystem_device != PCI_VENDOR_ID_IOTECH) continue; for (i = 0; i < ARRAY_SIZE(boardtypes); i++) { -- cgit v1.2.3-70-g09d2 From 325a01f38d8e443b9a10a84606740cf570efddd1 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 20 Jul 2012 10:32:29 -0700 Subject: staging: comedi: daqboard2000: ioremap'ed addresses are resource_size_t As mentioned by Ian Abbott, the pci address passed to ioremap should be a resource_size_t not an unsigned long. Use a local variable of that type to hold the pci_resource_start() that is passed to ioremp(). Set the dev->iobase to a dummy non-zero value so that the "detach" can use it as a flag to know that comedi_pci_disable() needs to be called. Reported-by: Ian Abbott Signed-off-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/daqboard2000.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index 7236cbe87e2..cad559a1a73 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -740,6 +740,7 @@ static int daqboard2000_attach(struct comedi_device *dev, { struct pci_dev *pcidev; struct comedi_subdevice *s; + resource_size_t pci_base; void *aux_data; unsigned int aux_len; int result; @@ -759,11 +760,12 @@ static int daqboard2000_attach(struct comedi_device *dev, "failed to enable PCI device and request regions\n"); return -EIO; } - dev->iobase = pci_resource_start(pcidev, 2); + dev->iobase = 1; /* the "detach" needs this */ - devpriv->plx = - ioremap(pci_resource_start(pcidev, 0), DAQBOARD2000_PLX_SIZE); - devpriv->daq = ioremap(dev->iobase, DAQBOARD2000_DAQ_SIZE); + pci_base = pci_resource_start(pcidev, 0); + devpriv->plx = ioremap(pci_base, DAQBOARD2000_PLX_SIZE); + pci_base = pci_resource_start(pcidev, 2); + devpriv->daq = ioremap(pci_base, DAQBOARD2000_DAQ_SIZE); if (!devpriv->plx || !devpriv->daq) return -ENOMEM; @@ -800,8 +802,6 @@ static int daqboard2000_attach(struct comedi_device *dev, printk("Interrupt after is: %x\n", interrupt); */ - dev->iobase = (unsigned long)devpriv->daq; - dev->board_name = this_board->name; s = dev->subdevices + 0; @@ -825,7 +825,7 @@ static int daqboard2000_attach(struct comedi_device *dev, s = dev->subdevices + 2; result = subdev_8255_init(dev, s, daqboard2000_8255_cb, - (unsigned long)(dev->iobase + 0x40)); + (unsigned long)(devpriv->daq + 0x40)); out: return result; -- cgit v1.2.3-70-g09d2 From 2724f01856fafbe9f76d8e74a564b576b6f02d72 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 20 Jul 2012 10:32:47 -0700 Subject: staging: comedi: dt3000: ioremap'ed addresses are resource_size_t As mentioned by Ian Abbott, the pci address passed to ioremap should be a resource_size_t not an unsigned long. Use a local variable of that type to hold the pci_resource_start() that is passed to ioremp(). Set the dev->iobase to a dummy non-zero value so that the "detach" can use it as a flag to know that comedi_pci_disable() needs to be called. Reported-by: Ian Abbott Signed-off-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/dt3000.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c index a6fe6c9be87..3476cda0fff 100644 --- a/drivers/staging/comedi/drivers/dt3000.c +++ b/drivers/staging/comedi/drivers/dt3000.c @@ -804,6 +804,7 @@ static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct pci_dev *pcidev; struct comedi_subdevice *s; + resource_size_t pci_base; int ret = 0; dev_dbg(dev->class_dev, "dt3000:\n"); @@ -820,9 +821,10 @@ static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it) ret = comedi_pci_enable(pcidev, "dt3000"); if (ret < 0) return ret; + dev->iobase = 1; /* the "detach" needs this */ - dev->iobase = pci_resource_start(pcidev, 0); - devpriv->io_addr = ioremap(dev->iobase, DT3000_SIZE); + pci_base = pci_resource_start(pcidev, 0); + devpriv->io_addr = ioremap(pci_base, DT3000_SIZE); if (!devpriv->io_addr) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From a26f4dd0ebd18f061366ca0231fdb74210e16140 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 20 Jul 2012 10:33:08 -0700 Subject: staging: comedi: rtd520: ioremap'ed addresses are resource_size_t As mentioned by Ian Abbott, the pci address passed to ioremap should be a resource_size_t not an unsigned long. Use a local variable of that type to hold the pci_resource_start() that is passed to ioremp(). Set the dev->iobase to a dummy non-zero value so that the "detach" can use it as a flag to know that comedi_pci_disable() needs to be called. Reported-by: Ian Abbott Signed-off-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/rtd520.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 112fdc3e9c6..5aa8be1e7b9 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -1619,9 +1619,8 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) struct rtdPrivate *devpriv; struct pci_dev *pcidev; struct comedi_subdevice *s; + resource_size_t pci_base; int ret; - resource_size_t physLas1; /* data area */ - resource_size_t physLcfg; /* PLX9080 */ #ifdef USE_DMA int index; #endif @@ -1655,20 +1654,15 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) printk(KERN_INFO "Failed to enable PCI device and request regions.\n"); return ret; } - - /* - * Initialize base addresses - */ - /* Get the physical address from PCI config */ - dev->iobase = pci_resource_start(pcidev, LAS0_PCIINDEX); - physLas1 = pci_resource_start(pcidev, LAS1_PCIINDEX); - physLcfg = pci_resource_start(pcidev, LCFG_PCIINDEX); - /* Now have the kernel map this into memory */ - /* ASSUME page aligned */ - devpriv->las0 = ioremap_nocache(dev->iobase, LAS0_PCISIZE); - devpriv->las1 = ioremap_nocache(physLas1, LAS1_PCISIZE); - devpriv->lcfg = ioremap_nocache(physLcfg, LCFG_PCISIZE); - + dev->iobase = 1; /* the "detach" needs this */ + + /* Initialize the base addresses */ + pci_base = pci_resource_start(pcidev, LAS0_PCIINDEX); + devpriv->las0 = ioremap_nocache(pci_base, LAS0_PCISIZE); + pci_base = pci_resource_start(pcidev, LAS1_PCIINDEX); + devpriv->las1 = ioremap_nocache(pci_base, LAS1_PCISIZE); + pci_base = pci_resource_start(pcidev, LCFG_PCIINDEX); + devpriv->lcfg = ioremap_nocache(pci_base, LCFG_PCISIZE); if (!devpriv->las0 || !devpriv->las1 || !devpriv->lcfg) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From 54f32a35f4d3a653a18a2c8c239f19ae060bd803 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 13 Jul 2012 15:12:03 -0500 Subject: ARM: OMAP2+: Fix dmtimer set source clock failure Calling the dmtimer function omap_dm_timer_set_source() fails if following a call to pm_runtime_put() to disable the timer. For example the following sequence would fail to set the parent clock ... omap_dm_timer_stop(gptimer); omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); The following error message would be seen ... omap_dm_timer_set_source: failed to set timer_32k_ck as parent The problem is that, by design, pm_runtime_put() simply decrements the usage count and returns before the timer has actually been disabled. Therefore, setting the parent clock failed because the timer was still active when the trying to set the parent clock. Setting a parent clock will fail if the clock you are setting the parent of has a non-zero usage count. To ensure that this does not fail use pm_runtime_put_sync() when disabling the timer. Note that this will not be seen on OMAP1 devices, because these devices do not use the clock framework for dmtimers. Signed-off-by: Jon Hunter Acked-by: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8cad7a..7b6689af0cc 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); -- cgit v1.2.3-70-g09d2 From 70d291b215721ce60bde5761e3eaf6a15f7d7671 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: ARM: SAMSUNG: Set HDMI platform data for Exynos4x12 SoCs Adds support for setting HDMI platform data for Exynos4X12 SoCs. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce3553..3f3c941d908 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -748,7 +748,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210()) + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) pd->bus_num = 8; else if (soc_is_s5pv210()) pd->bus_num = 3; -- cgit v1.2.3-70-g09d2 From ee21ae6809e22676cd014ce02ec3b3387b436aa5 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: ARM: SAMSUNG: Add API to set platform data for s5p-tv driver Commit 350f2f4dad64 ("[media] v4l: s5p-tv: hdmi: add support for platform data") makes the presence of platform data mandatory for s5p-tv driver. Adding an API to plat-samsung for this purpose. Signed-off-by: Tushar Behera Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 26 ++++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/hdmi.h | 16 ++++++++++++++++ 2 files changed, 42 insertions(+) create mode 100644 arch/arm/plat-samsung/include/plat/hdmi.h diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 3f3c941d908..fc49f3dabd7 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,8 @@ #include #include +#include + #include #include #include @@ -760,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s5p_device_i2c_hdmiphy); } + +struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; + +void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus) +{ + struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; + + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) + pd->hdmiphy_bus = 8; + else if (soc_is_s5pv210()) + pd->hdmiphy_bus = 3; + else + pd->hdmiphy_bus = 0; + + pd->hdmiphy_info = hdmiphy_info; + pd->mhl_info = mhl_info; + pd->mhl_bus = mhl_bus; + + s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), + &s5p_device_hdmi); +} + #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ /* I2S */ diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h new file mode 100644 index 00000000000..331d046ac2c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hdmi.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_HDMI_H +#define __PLAT_SAMSUNG_HDMI_H __FILE__ + +extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus); + +#endif /* __PLAT_SAMSUNG_HDMI_H */ -- cgit v1.2.3-70-g09d2 From cceb840904d1c1f7ee453bfa9886117c6931bdbf Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: ARM: EXYNOS: Set HDMI platform data in SMDKV310 Sets HDMI platform data in SMDKV310 board. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-smdkv310.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274..73f2bce097e 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); -- cgit v1.2.3-70-g09d2 From ccc61fd460fc1b20480dbb7e10b2ea82433bfd58 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: ARM: EXYNOS: Set HDMI platform data in Origen board Signed-off-by: Tushar Behera Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-origen.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca80307d6d..4e574c24581 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include @@ -734,6 +735,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -781,6 +787,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; -- cgit v1.2.3-70-g09d2 From 48a08bab3066a9452216f8c52e0d6f35566de04d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 8 Aug 2012 00:47:21 -0300 Subject: ASoC: mxs: Fix the name of the SoC family SND_SOC_MXS_SGTL5000 is used on MXS boards, so fix the SoC family name. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/mxs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/mxs/Kconfig b/sound/soc/mxs/Kconfig index 99a997f19bb..b6fa77678d9 100644 --- a/sound/soc/mxs/Kconfig +++ b/sound/soc/mxs/Kconfig @@ -10,7 +10,7 @@ menuconfig SND_MXS_SOC if SND_MXS_SOC config SND_SOC_MXS_SGTL5000 - tristate "SoC Audio support for i.MX boards with sgtl5000" + tristate "SoC Audio support for MXS boards with sgtl5000" depends on I2C select SND_SOC_SGTL5000 help -- cgit v1.2.3-70-g09d2 From eb0c5686b3c6332892b3eb5d8bb9eb04f943cb25 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Wed, 8 Aug 2012 00:50:19 +0200 Subject: regulator: gpio-regulator: Split setting of voltages and currents Originally gpio-regulator used the first item of its state list that matched the given voltage or current range. Commit 4dbd8f63f0 (regulator: gpio-regulator: Set the smallest voltage/current in the specified range) changed this, to make the selection independent of the ordering of the state list. But selecting the minimal value is only true for voltage regulators. For current regulators the maximum in the given range should be selected instead. Therefore split the previous common selection function into specific functions for voltage and current regulators. Signed-off-by: Heiko Stuebner Signed-off-by: Mark Brown --- drivers/regulator/gpio-regulator.c | 38 ++++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 34b67bee932..8b5944f2d7d 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -57,16 +57,17 @@ static int gpio_regulator_get_value(struct regulator_dev *dev) return -EINVAL; } -static int gpio_regulator_set_value(struct regulator_dev *dev, - int min, int max, unsigned *selector) +static int gpio_regulator_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV, + unsigned *selector) { struct gpio_regulator_data *data = rdev_get_drvdata(dev); int ptr, target = 0, state, best_val = INT_MAX; for (ptr = 0; ptr < data->nr_states; ptr++) if (data->states[ptr].value < best_val && - data->states[ptr].value >= min && - data->states[ptr].value <= max) { + data->states[ptr].value >= min_uV && + data->states[ptr].value <= max_uV) { target = data->states[ptr].gpios; best_val = data->states[ptr].value; if (selector) @@ -85,13 +86,6 @@ static int gpio_regulator_set_value(struct regulator_dev *dev, return 0; } -static int gpio_regulator_set_voltage(struct regulator_dev *dev, - int min_uV, int max_uV, - unsigned *selector) -{ - return gpio_regulator_set_value(dev, min_uV, max_uV, selector); -} - static int gpio_regulator_list_voltage(struct regulator_dev *dev, unsigned selector) { @@ -106,7 +100,27 @@ static int gpio_regulator_list_voltage(struct regulator_dev *dev, static int gpio_regulator_set_current_limit(struct regulator_dev *dev, int min_uA, int max_uA) { - return gpio_regulator_set_value(dev, min_uA, max_uA, NULL); + struct gpio_regulator_data *data = rdev_get_drvdata(dev); + int ptr, target = 0, state, best_val = 0; + + for (ptr = 0; ptr < data->nr_states; ptr++) + if (data->states[ptr].value > best_val && + data->states[ptr].value >= min_uA && + data->states[ptr].value <= max_uA) { + target = data->states[ptr].gpios; + best_val = data->states[ptr].value; + } + + if (best_val == 0) + return -EINVAL; + + for (ptr = 0; ptr < data->nr_gpios; ptr++) { + state = (target & (1 << ptr)) >> ptr; + gpio_set_value(data->gpios[ptr].gpio, state); + } + data->state = target; + + return 0; } static struct regulator_ops gpio_regulator_voltage_ops = { -- cgit v1.2.3-70-g09d2 From 0865a75d4166bddc533fd50831829ceefb94f9b0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 7 Aug 2012 16:51:34 -0300 Subject: ASoC: imx-ssi: Remove mono support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Playing a mono track results in incorrect playback rate, ie, the audio is played at a faster rate. Remove mono support in the driver by setting 'channes_min' to dual-channel and this allows mono tracks to be played correctly. Reported-by: Gaëtan Carlier Tested-by: Gaëtan Carlier Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/fsl/imx-ssi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c index 28dd76c7cb1..81d7728cf67 100644 --- a/sound/soc/fsl/imx-ssi.c +++ b/sound/soc/fsl/imx-ssi.c @@ -380,13 +380,14 @@ static int imx_ssi_dai_probe(struct snd_soc_dai *dai) static struct snd_soc_dai_driver imx_ssi_dai = { .probe = imx_ssi_dai_probe, .playback = { - .channels_min = 1, + /* The SSI does not support monaural audio. */ + .channels_min = 2, .channels_max = 2, .rates = SNDRV_PCM_RATE_8000_96000, .formats = SNDRV_PCM_FMTBIT_S16_LE, }, .capture = { - .channels_min = 1, + .channels_min = 2, .channels_max = 2, .rates = SNDRV_PCM_RATE_8000_96000, .formats = SNDRV_PCM_FMTBIT_S16_LE, -- cgit v1.2.3-70-g09d2 From 6c691b5df1fcd93f2e9f65e1a8a3dd0e6fd158ea Mon Sep 17 00:00:00 2001 From: Jan Luebbe Date: Tue, 7 Aug 2012 18:29:45 +0200 Subject: omap: Fix multi.h when only ARCH_OMAP3 and SOC_AM33XX are selected When only ARCH_OMAP3 (or -2,-4,...) and SOC_AM33XX are selected, multi.h doesn't set MULTI_OMAP2. In this case, cpu.h will simply define cpu_is_omap24xx() as 1. This causes problems for example for omap_hwmod.c:omap_hwmod_init which checks for cpu_is_omap24xx() first, using the wrong soc_ops for AM33xx. Fix this by defining MULTI_OMAP2 when using SOC_AM33XX together with something else. Signed-off-by: Jan Luebbe Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/multi.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320f106..324d31b1485 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ -- cgit v1.2.3-70-g09d2 From 90f7f9acecc6dde87cf25db1ad7599926d6773f7 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 7 Aug 2012 19:44:01 +0530 Subject: ARM: OMAP2+: cpu: Add am33xx device under cpu_class_is_omap2 AM33XX device falls under omap2 class, so make cpu_class_is_omap2() macro true by adding soc_is_am33xx() to existing list of cpu/soc check. This is required to unblock the basic boot support on AM335x platform. Having done that, we still need to sort out properly from common zImage point of view without having to maintain this cpu/soc_is_xxx list. Signed-off-by: Vaibhav Hiremath Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180edcff..bb5d08a70db 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 -- cgit v1.2.3-70-g09d2 From ed36081350d2ca4f692f04c6a2d24d1e3a339da1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 8 Aug 2012 17:12:52 +0200 Subject: ALSA: hda - Add codec->pcm_format_first flag Introduced a new flag to set up the PCM stream format at first before the stream_id and channel tag. Some codecs (e.g. CA0132) seem preferring this over stream_id -> format order. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 69 ++++++++++++++++++++++++++++++----------------- sound/pci/hda/hda_codec.h | 1 + 2 files changed, 46 insertions(+), 24 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 88a9c20eb7a..598b9e2d85e 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1386,6 +1386,44 @@ int snd_hda_codec_configure(struct hda_codec *codec) } EXPORT_SYMBOL_HDA(snd_hda_codec_configure); +/* update the stream-id if changed */ +static void update_pcm_stream_id(struct hda_codec *codec, + struct hda_cvt_setup *p, hda_nid_t nid, + u32 stream_tag, int channel_id) +{ + unsigned int oldval, newval; + + if (p->stream_tag != stream_tag || p->channel_id != channel_id) { + oldval = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0); + newval = (stream_tag << 4) | channel_id; + if (oldval != newval) + snd_hda_codec_write(codec, nid, 0, + AC_VERB_SET_CHANNEL_STREAMID, + newval); + p->stream_tag = stream_tag; + p->channel_id = channel_id; + } +} + +/* update the format-id if changed */ +static void update_pcm_format(struct hda_codec *codec, struct hda_cvt_setup *p, + hda_nid_t nid, int format) +{ + unsigned int oldval; + + if (p->format_id != format) { + oldval = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_STREAM_FORMAT, 0); + if (oldval != format) { + msleep(1); + snd_hda_codec_write(codec, nid, 0, + AC_VERB_SET_STREAM_FORMAT, + format); + } + p->format_id = format; + } +} + /** * snd_hda_codec_setup_stream - set up the codec for streaming * @codec: the CODEC to set up @@ -1400,7 +1438,6 @@ void snd_hda_codec_setup_stream(struct hda_codec *codec, hda_nid_t nid, { struct hda_codec *c; struct hda_cvt_setup *p; - unsigned int oldval, newval; int type; int i; @@ -1413,29 +1450,13 @@ void snd_hda_codec_setup_stream(struct hda_codec *codec, hda_nid_t nid, p = get_hda_cvt_setup(codec, nid); if (!p) return; - /* update the stream-id if changed */ - if (p->stream_tag != stream_tag || p->channel_id != channel_id) { - oldval = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0); - newval = (stream_tag << 4) | channel_id; - if (oldval != newval) - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_CHANNEL_STREAMID, - newval); - p->stream_tag = stream_tag; - p->channel_id = channel_id; - } - /* update the format-id if changed */ - if (p->format_id != format) { - oldval = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_STREAM_FORMAT, 0); - if (oldval != format) { - msleep(1); - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_STREAM_FORMAT, - format); - } - p->format_id = format; - } + + if (codec->pcm_format_first) + update_pcm_format(codec, p, nid, format); + update_pcm_stream_id(codec, p, nid, stream_tag, channel_id); + if (!codec->pcm_format_first) + update_pcm_format(codec, p, nid, format); + p->active = 1; p->dirty = 0; diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index c422d330ca5..7fbc1bcaf1a 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -861,6 +861,7 @@ struct hda_codec { unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */ unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */ unsigned int no_jack_detect:1; /* Machine has no jack-detection */ + unsigned int pcm_format_first:1; /* PCM format must be set first */ #ifdef CONFIG_SND_HDA_POWER_SAVE unsigned int power_on :1; /* current (global) power-state */ int power_transition; /* power-state in transition */ -- cgit v1.2.3-70-g09d2 From 55cf87fe0e9783e25f442be1e48b8319d86131ea Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 8 Aug 2012 17:15:55 +0200 Subject: ALSA: hda - Fix superfluous "-in" suffix from CA0132 capture items Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index d0d3540e39e..2685590925f 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -988,12 +988,12 @@ static void ca0132_config(struct hda_codec *codec) /* Mic-in */ spec->input_pins[0] = 0x12; - spec->input_labels[0] = "Mic-In"; + spec->input_labels[0] = "Mic"; spec->adcs[0] = 0x07; /* Line-In */ spec->input_pins[1] = 0x11; - spec->input_labels[1] = "Line-In"; + spec->input_labels[1] = "Line"; spec->adcs[1] = 0x08; spec->num_inputs = 2; } -- cgit v1.2.3-70-g09d2 From 27ebeb0b1b5bb26908e485a7e8bd2ec30366ffef Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 8 Aug 2012 17:20:18 +0200 Subject: ALSA: hda - Use the standard PCM ops for CA0132 Now with the workaround using codec->pcm_format_first flag, we can clean up the home-baked codes in patch_ca0132.c. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 142 +++++++++---------------------------------- 1 file changed, 29 insertions(+), 113 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 2685590925f..31512a0f1d0 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -464,50 +464,17 @@ exit: } /* - * PCM stuffs + * PCM callbacks */ -static void ca0132_setup_stream(struct hda_codec *codec, hda_nid_t nid, - u32 stream_tag, - int channel_id, int format) +static int ca0132_playback_pcm_open(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) { - unsigned int oldval, newval; - - if (!nid) - return; - - snd_printdd("ca0132_setup_stream: " - "NID=0x%x, stream=0x%x, channel=%d, format=0x%x\n", - nid, stream_tag, channel_id, format); - - /* update the format-id if changed */ - oldval = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_STREAM_FORMAT, - 0); - if (oldval != format) { - msleep(20); - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_STREAM_FORMAT, - format); - } - - oldval = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0); - newval = (stream_tag << 4) | channel_id; - if (oldval != newval) { - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_CHANNEL_STREAMID, - newval); - } -} - -static void ca0132_cleanup_stream(struct hda_codec *codec, hda_nid_t nid) -{ - snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_STREAM_FORMAT, 0); - snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CHANNEL_STREAMID, 0); + struct ca0132_spec *spec = codec->spec; + return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream, + hinfo); } -/* - * PCM callbacks - */ static int ca0132_playback_pcm_prepare(struct hda_pcm_stream *hinfo, struct hda_codec *codec, unsigned int stream_tag, @@ -515,10 +482,8 @@ static int ca0132_playback_pcm_prepare(struct hda_pcm_stream *hinfo, struct snd_pcm_substream *substream) { struct ca0132_spec *spec = codec->spec; - - ca0132_setup_stream(codec, spec->dacs[0], stream_tag, 0, format); - - return 0; + return snd_hda_multi_out_analog_prepare(codec, &spec->multiout, + stream_tag, format, substream); } static int ca0132_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, @@ -526,92 +491,45 @@ static int ca0132_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, struct snd_pcm_substream *substream) { struct ca0132_spec *spec = codec->spec; - - ca0132_cleanup_stream(codec, spec->dacs[0]); - - return 0; + return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout); } /* * Digital out */ -static int ca0132_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo, - struct hda_codec *codec, - unsigned int stream_tag, - unsigned int format, - struct snd_pcm_substream *substream) +static int ca0132_dig_playback_pcm_open(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) { struct ca0132_spec *spec = codec->spec; - - ca0132_setup_stream(codec, spec->dig_out, stream_tag, 0, format); - - return 0; -} - -static int ca0132_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, - struct hda_codec *codec, - struct snd_pcm_substream *substream) -{ - struct ca0132_spec *spec = codec->spec; - - ca0132_cleanup_stream(codec, spec->dig_out); - - return 0; + return snd_hda_multi_out_dig_open(codec, &spec->multiout); } -/* - * Analog capture - */ -static int ca0132_capture_pcm_prepare(struct hda_pcm_stream *hinfo, +static int ca0132_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo, struct hda_codec *codec, unsigned int stream_tag, unsigned int format, struct snd_pcm_substream *substream) { struct ca0132_spec *spec = codec->spec; - - ca0132_setup_stream(codec, spec->adcs[substream->number], - stream_tag, 0, format); - - return 0; + return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, + stream_tag, format, substream); } -static int ca0132_capture_pcm_cleanup(struct hda_pcm_stream *hinfo, - struct hda_codec *codec, - struct snd_pcm_substream *substream) -{ - struct ca0132_spec *spec = codec->spec; - - ca0132_cleanup_stream(codec, spec->adcs[substream->number]); - - return 0; -} - -/* - * Digital capture - */ -static int ca0132_dig_capture_pcm_prepare(struct hda_pcm_stream *hinfo, +static int ca0132_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, struct hda_codec *codec, - unsigned int stream_tag, - unsigned int format, struct snd_pcm_substream *substream) { struct ca0132_spec *spec = codec->spec; - - ca0132_setup_stream(codec, spec->dig_in, stream_tag, 0, format); - - return 0; + return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout); } -static int ca0132_dig_capture_pcm_cleanup(struct hda_pcm_stream *hinfo, - struct hda_codec *codec, - struct snd_pcm_substream *substream) +static int ca0132_dig_playback_pcm_close(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) { struct ca0132_spec *spec = codec->spec; - - ca0132_cleanup_stream(codec, spec->dig_in); - - return 0; + return snd_hda_multi_out_dig_close(codec, &spec->multiout); } /* @@ -621,6 +539,7 @@ static struct hda_pcm_stream ca0132_pcm_analog_playback = { .channels_min = 2, .channels_max = 2, .ops = { + .open = ca0132_playback_pcm_open, .prepare = ca0132_playback_pcm_prepare, .cleanup = ca0132_playback_pcm_cleanup }, @@ -630,10 +549,6 @@ static struct hda_pcm_stream ca0132_pcm_analog_capture = { .substreams = 1, .channels_min = 2, .channels_max = 2, - .ops = { - .prepare = ca0132_capture_pcm_prepare, - .cleanup = ca0132_capture_pcm_cleanup - }, }; static struct hda_pcm_stream ca0132_pcm_digital_playback = { @@ -641,6 +556,8 @@ static struct hda_pcm_stream ca0132_pcm_digital_playback = { .channels_min = 2, .channels_max = 2, .ops = { + .open = ca0132_dig_playback_pcm_open, + .close = ca0132_dig_playback_pcm_close, .prepare = ca0132_dig_playback_pcm_prepare, .cleanup = ca0132_dig_playback_pcm_cleanup }, @@ -650,10 +567,6 @@ static struct hda_pcm_stream ca0132_pcm_digital_capture = { .substreams = 1, .channels_min = 2, .channels_max = 2, - .ops = { - .prepare = ca0132_dig_capture_pcm_prepare, - .cleanup = ca0132_dig_capture_pcm_cleanup - }, }; static int ca0132_build_pcms(struct hda_codec *codec) @@ -961,6 +874,9 @@ static void ca0132_config(struct hda_codec *codec) struct ca0132_spec *spec = codec->spec; struct auto_pin_cfg *cfg = &spec->autocfg; + codec->pcm_format_first = 1; + codec->no_sticky_stream = 1; + /* line-outs */ cfg->line_outs = 1; cfg->line_out_pins[0] = 0x0b; /* front */ -- cgit v1.2.3-70-g09d2 From 8e13fc1c5f694a6ae4032c7f94103c137136733f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 8 Aug 2012 17:26:54 +0200 Subject: ALSA: hda - Add missing SPDIF I/O setup for CA0132 CA0132 driver had some codes to handle the S/PDIF I/O, but the actual setups of pins and converters were missing. Now the pins are added. Also, fixed a few points triggering invalid codec verbs and mixer elements since the digital I/O audio widgets on CA0132 have no amp. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 31512a0f1d0..9c0ec0a55be 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -246,7 +246,7 @@ static void init_output(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac) AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); } - if (dac) + if (dac && (get_wcaps(codec, dac) & AC_WCAP_OUT_AMP)) snd_hda_codec_write(codec, dac, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO); } @@ -261,7 +261,7 @@ static void init_input(struct hda_codec *codec, hda_nid_t pin, hda_nid_t adc) AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)); } - if (adc) + if (adc && (get_wcaps(codec, adc) & AC_WCAP_IN_AMP)) snd_hda_codec_write(codec, adc, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)); } @@ -841,18 +841,16 @@ static int ca0132_build_controls(struct hda_codec *codec) spec->dig_out); if (err < 0) return err; - err = add_out_volume(codec, spec->dig_out, "IEC958"); + err = snd_hda_create_spdif_share_sw(codec, &spec->multiout); if (err < 0) return err; + /* spec->multiout.share_spdif = 1; */ } if (spec->dig_in) { err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in); if (err < 0) return err; - err = add_in_volume(codec, spec->dig_in, "IEC958"); - if (err < 0) - return err; } return 0; } @@ -912,6 +910,16 @@ static void ca0132_config(struct hda_codec *codec) spec->input_labels[1] = "Line"; spec->adcs[1] = 0x08; spec->num_inputs = 2; + + /* SPDIF I/O */ + spec->dig_out = 0x05; + spec->multiout.dig_out_nid = spec->dig_out; + cfg->dig_out_pins[0] = 0x0c; + cfg->dig_outs = 1; + cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; + spec->dig_in = 0x09; + cfg->dig_in_pin = 0x0e; + cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; } static void ca0132_init_chip(struct hda_codec *codec) -- cgit v1.2.3-70-g09d2 From 50d0206fcaea3e736f912fd5b00ec6233fb4ce44 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 26 Jul 2012 12:03:59 -0700 Subject: xhci: Fix bug after deq ptr set to link TRB. This patch fixes a particularly nasty bug that was revealed by the ring expansion patches. The bug has been present since the very beginning of the xHCI driver history, and could have caused general protection faults from bad memory accesses. The first thing to note is that a Set TR Dequeue Pointer command can move the dequeue pointer to a link TRB, if the canceled or stalled transfer TD ended just before a link TRB. The function to increment the dequeue pointer, inc_deq, was written before cancellation and stall support was added. It assumed that the dequeue pointer could never point to a link TRB. It would unconditionally increment the dequeue pointer at the start of the function, check if the pointer was now on a link TRB, and move it to the top of the next segment if so. This means that if a Set TR Dequeue Point command moved the dequeue pointer to a link TRB, a subsequent call to inc_deq() would move the pointer off the segment and into la-la-land. It would then read from that memory to determine if it was a link TRB. Other functions would often call inc_deq() until the dequeue pointer matched some other pointer, which means this function would quite happily read all of system memory before wrapping around to the right pointer value. Often, there would be another endpoint segment from a different ring allocated from the same DMA pool, which would be contiguous to the segment inc_deq just stepped off of. inc_deq would eventually find the link TRB in that segment, and blindly move the dequeue pointer back to the top of the correct ring segment. The only reason the original code worked at all is because there was only one ring segment. With the ring expansion patches, the dequeue pointer would eventually wrap into place, but the dequeue segment would be out-of-sync. On the second TD after the dequeue pointer was moved to a link TRB, trb_in_td() would fail (because the dequeue pointer and dequeue segment were out-of-sync), and this message would appear: ERROR Transfer event TRB DMA ptr not part of current TD This fixes bugzilla entry 4333 (option-based modem unhappy on USB 3.0 port: "Transfer event TRB DMA ptr not part of current TD", "rejecting I/O to offline device"), https://bugzilla.kernel.org/show_bug.cgi?id=43333 and possibly other general protection fault bugs as well. This patch should be backported to kernels as old as 2.6.31. A separate patch will be created for kernels older than 3.4, since inc_deq was modified in 3.4 and this patch will not apply. Signed-off-by: Sarah Sharp Tested-by: James Ettle Tested-by: Matthew Hall Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-ring.c | 36 ++++++++++++++++++++++-------------- 1 file changed, 22 insertions(+), 14 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 0c93f5dcea6..643c2f3f3e7 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -145,29 +145,37 @@ static void next_trb(struct xhci_hcd *xhci, */ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring) { - union xhci_trb *next; unsigned long long addr; ring->deq_updates++; - /* If this is not event ring, there is one more usable TRB */ + /* + * If this is not event ring, and the dequeue pointer + * is not on a link TRB, there is one more usable TRB + */ if (ring->type != TYPE_EVENT && !last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) ring->num_trbs_free++; - next = ++(ring->dequeue); - /* Update the dequeue pointer further if that was a link TRB or we're at - * the end of an event ring segment (which doesn't have link TRBS) - */ - while (last_trb(xhci, ring, ring->deq_seg, next)) { - if (ring->type == TYPE_EVENT && last_trb_on_last_seg(xhci, - ring, ring->deq_seg, next)) { - ring->cycle_state = (ring->cycle_state ? 0 : 1); + do { + /* + * Update the dequeue pointer further if that was a link TRB or + * we're at the end of an event ring segment (which doesn't have + * link TRBS) + */ + if (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) { + if (ring->type == TYPE_EVENT && + last_trb_on_last_seg(xhci, ring, + ring->deq_seg, ring->dequeue)) { + ring->cycle_state = (ring->cycle_state ? 0 : 1); + } + ring->deq_seg = ring->deq_seg->next; + ring->dequeue = ring->deq_seg->trbs; + } else { + ring->dequeue++; } - ring->deq_seg = ring->deq_seg->next; - ring->dequeue = ring->deq_seg->trbs; - next = ring->dequeue; - } + } while (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)); + addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); } -- cgit v1.2.3-70-g09d2 From 47fbf7976e0b7d9dcdd799e2a1baba19064d9631 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 8 Aug 2012 16:03:13 -0400 Subject: NFSv4.1: Remove a bogus BUG_ON() in nfs4_layoutreturn_done Ever since commit 0a57cdac3f (NFSv4.1 send layoutreturn to fence disconnected data server) we've been sending layoutreturn calls while there is potentially still outstanding I/O to the data servers. The reason we do this is to avoid races between replayed writes to the MDS and the original writes to the DS. When this happens, the BUG_ON() in nfs4_layoutreturn_done can be triggered because it assumes that we would never call layoutreturn without knowing that all I/O to the DS is finished. The fix is to remove the BUG_ON() now that the assumptions behind the test are obsolete. Reported-by: Boaz Harrosh Reported-by: Tigran Mkrtchyan Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org [>=3.5] --- fs/nfs/nfs4proc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f94f6b3928f..c77d296bdaa 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -6359,12 +6359,8 @@ static void nfs4_layoutreturn_done(struct rpc_task *task, void *calldata) return; } spin_lock(&lo->plh_inode->i_lock); - if (task->tk_status == 0) { - if (lrp->res.lrs_present) { - pnfs_set_layout_stateid(lo, &lrp->res.stateid, true); - } else - BUG_ON(!list_empty(&lo->plh_segs)); - } + if (task->tk_status == 0 && lrp->res.lrs_present) + pnfs_set_layout_stateid(lo, &lrp->res.stateid, true); lo->plh_block_lgets--; spin_unlock(&lo->plh_inode->i_lock); dprintk("<-- %s\n", __func__); -- cgit v1.2.3-70-g09d2 From c6fd893da927c6cefb2ece22402765379921a834 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 31 Jul 2012 10:29:14 -0700 Subject: x86, avx: don't use avx instructions with "noxsave" boot param Clear AVX, AVX2 features along with clearing XSAVE feature bits, as part of the parsing "noxsave" parameter. Fixes the kernel boot panic with "noxsave" boot parameter. We could have checked cpu_has_osxsave along with cpu_has_avx etc, but Peter mentioned clearing the feature bits will be better for uses like static_cpu_has() etc. Signed-off-by: Suresh Siddha Link: http://lkml.kernel.org/r/1343755754.2041.2.camel@sbsiddha-desk.sc.intel.com Cc: # v3.5 Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 46d8786d655..a5fbc3c5fcc 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -144,6 +144,8 @@ static int __init x86_xsave_setup(char *s) { setup_clear_cpu_cap(X86_FEATURE_XSAVE); setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); + setup_clear_cpu_cap(X86_FEATURE_AVX); + setup_clear_cpu_cap(X86_FEATURE_AVX2); return 1; } __setup("noxsave", x86_xsave_setup); -- cgit v1.2.3-70-g09d2 From 94c142a160d63edac0e1fca7848960dcf75dd2a9 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Thu, 9 Aug 2012 10:56:12 +0200 Subject: ALSA: hda - Fix pop noise in headphones on S3 for Asus X55A, X55V To turn off pin control for the pin was tested, and helped against this issue. BugLink: https://bugs.launchpad.net/bugs/1034779 Tested-by: Chih-Hsyuan Ho Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_via.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 80d90cb4285..43077177691 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -1752,6 +1752,14 @@ static int via_suspend(struct hda_codec *codec) { struct via_spec *spec = codec->spec; vt1708_stop_hp_work(spec); + + if (spec->codec_type == VT1802) { + /* Fix pop noise on headphones */ + int i; + for (i = 0; i < spec->autocfg.hp_outs; i++) + snd_hda_set_pin_ctl(codec, spec->autocfg.hp_pins[i], 0); + } + return 0; } #endif -- cgit v1.2.3-70-g09d2 From e76ab829cc2d8b6350a3f01fffb208df4d7d8c1b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 8 Aug 2012 15:51:44 +0100 Subject: regulator: twl: Remove references to the twl4030 regulator It's not referenced anywhere any more and the compiler notices. Signed-off-by: Mark Brown --- drivers/regulator/twl-regulator.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 242fe90dc56..30cb62289b7 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -1048,7 +1048,6 @@ TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 0); TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 0); TWL6030_FIXED_LDO(V1V8, 0x16, 1800, 0); TWL6030_FIXED_LDO(V2V1, 0x1c, 2100, 0); -TWL6030_FIXED_RESOURCE(CLK32KG, 0x8C, 0); TWL6025_ADJUSTABLE_SMPS(SMPS3, 0x34); TWL6025_ADJUSTABLE_SMPS(SMPS4, 0x10); TWL6025_ADJUSTABLE_SMPS(VIO, 0x16); -- cgit v1.2.3-70-g09d2 From 0d624275720a4b01217693eb80d967a0d5f1f3a3 Mon Sep 17 00:00:00 2001 From: Vaibhav Bedia Date: Wed, 8 Aug 2012 20:40:31 +0530 Subject: ASoC: Davinci: McASP: Flush the FIFO before enabling FIFO should be flushed before it is enabled for the first time. This fixes the I/O errors reported by the ASoC core on a fresh boot Signed-off-by: Vaibhav Bedia Signed-off-by: Hebbar, Gururaja Signed-off-by: Mark Brown --- sound/soc/davinci/davinci-mcasp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 95441bfc819..ce5e5cd254d 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -380,14 +380,20 @@ static void mcasp_start_tx(struct davinci_audio_dev *dev) static void davinci_mcasp_start(struct davinci_audio_dev *dev, int stream) { if (stream == SNDRV_PCM_STREAM_PLAYBACK) { - if (dev->txnumevt) /* enable FIFO */ + if (dev->txnumevt) { /* enable FIFO */ + mcasp_clr_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, + FIFO_ENABLE); mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE); + } mcasp_start_tx(dev); } else { - if (dev->rxnumevt) /* enable FIFO */ + if (dev->rxnumevt) { /* enable FIFO */ + mcasp_clr_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, + FIFO_ENABLE); mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE); + } mcasp_start_rx(dev); } } -- cgit v1.2.3-70-g09d2 From 8b5eae137b91cb2db15fe2c5a913cafde4629339 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Thu, 9 Aug 2012 18:08:40 -0400 Subject: ASoC: bfin: fix memory leak in sport3 controller driver Signed-off-by: Scott Jiang Signed-off-by: Mark Brown --- sound/soc/blackfin/bf6xx-sport.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/blackfin/bf6xx-sport.c b/sound/soc/blackfin/bf6xx-sport.c index 318c5ba5360..dfb744381c4 100644 --- a/sound/soc/blackfin/bf6xx-sport.c +++ b/sound/soc/blackfin/bf6xx-sport.c @@ -413,7 +413,14 @@ EXPORT_SYMBOL(sport_create); void sport_delete(struct sport_device *sport) { + if (sport->tx_desc) + dma_free_coherent(NULL, sport->tx_desc_size, + sport->tx_desc, 0); + if (sport->rx_desc) + dma_free_coherent(NULL, sport->rx_desc_size, + sport->rx_desc, 0); sport_free_resource(sport); + kfree(sport); } EXPORT_SYMBOL(sport_delete); -- cgit v1.2.3-70-g09d2 From 52c0eee3329b08dfd912a59e0246e21026308301 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 30 Jul 2012 18:23:35 +0100 Subject: ASoC: wm8962: Don't duplicate bias level management in resume The core will bring the bias level up for us since we use idle_bias_off, duplicating this may be harmful. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8962.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index aa9ce9dd7d8..ce672007379 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3733,21 +3733,6 @@ static int wm8962_runtime_resume(struct device *dev) regcache_sync(wm8962->regmap); - regmap_update_bits(wm8962->regmap, WM8962_ANTI_POP, - WM8962_STARTUP_BIAS_ENA | WM8962_VMID_BUF_ENA, - WM8962_STARTUP_BIAS_ENA | WM8962_VMID_BUF_ENA); - - /* Bias enable at 2*50k for ramp */ - regmap_update_bits(wm8962->regmap, WM8962_PWR_MGMT_1, - WM8962_VMID_SEL_MASK | WM8962_BIAS_ENA, - WM8962_BIAS_ENA | 0x180); - - msleep(5); - - /* VMID back to 2x250k for standby */ - regmap_update_bits(wm8962->regmap, WM8962_PWR_MGMT_1, - WM8962_VMID_SEL_MASK, 0x100); - return 0; } -- cgit v1.2.3-70-g09d2 From 389d7b26d9e4f78b17366c23a3aa16b3c5cb3bde Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Thu, 9 Aug 2012 15:19:25 +0200 Subject: bio: Fix potential memory leak in bio_find_or_create_slab() Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Jeff Moyer Signed-off-by: Jens Axboe --- fs/bio.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 73922abba83..fed1f799cb5 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -73,7 +73,7 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) { unsigned int sz = sizeof(struct bio) + extra_size; struct kmem_cache *slab = NULL; - struct bio_slab *bslab; + struct bio_slab *bslab, *new_bio_slabs; unsigned int i, entry = -1; mutex_lock(&bio_slab_lock); @@ -97,11 +97,12 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) if (bio_slab_nr == bio_slab_max && entry == -1) { bio_slab_max <<= 1; - bio_slabs = krealloc(bio_slabs, - bio_slab_max * sizeof(struct bio_slab), - GFP_KERNEL); - if (!bio_slabs) + new_bio_slabs = krealloc(bio_slabs, + bio_slab_max * sizeof(struct bio_slab), + GFP_KERNEL); + if (!new_bio_slabs) goto out_unlock; + bio_slabs = new_bio_slabs; } if (entry == -1) entry = bio_slab_nr++; -- cgit v1.2.3-70-g09d2 From 276f0f5d157bb4a816053f4f3a941dbcd4f76556 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 9 Aug 2012 15:20:23 +0200 Subject: block: disable discard request merge temporarily The SCSI discard request merge never worked, and looks no solution for in future, let's disable it temporarily. Signed-off-by: Shaohua Li Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index dc632975d54..4a2ab7c8539 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -601,7 +601,7 @@ static inline void blk_clear_rl_full(struct request_list *rl, bool sync) * it already be started by driver. */ #define RQ_NOMERGE_FLAGS \ - (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA) + (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA | REQ_DISCARD) #define rq_mergeable(rq) \ (!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \ (((rq)->cmd_flags & REQ_DISCARD) || \ -- cgit v1.2.3-70-g09d2 From 15676937e6a7e98d37f4c1eaa0e7b3c111627fce Mon Sep 17 00:00:00 2001 From: Chris Rattray Date: Thu, 9 Aug 2012 10:10:54 +0100 Subject: ASoC: wm8994: Add missing dapm routes for WM8958 rev A Signed-off-by: Chris Rattray Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 04ef03175c5..6c9eeca85b9 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -4038,6 +4038,8 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) break; case WM8958: if (wm8994->revision < 1) { + snd_soc_dapm_add_routes(dapm, wm8994_intercon, + ARRAY_SIZE(wm8994_intercon)); snd_soc_dapm_add_routes(dapm, wm8994_revd_intercon, ARRAY_SIZE(wm8994_revd_intercon)); snd_soc_dapm_add_routes(dapm, wm8994_lateclk_revd_intercon, -- cgit v1.2.3-70-g09d2 From 8430f9772f9ac305211f177b0fa56a312175da11 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Thu, 9 Aug 2012 15:23:07 +0200 Subject: block: remove plugging at buffered write time Buffered write(2) is not directly tied to IO, so it's not suitable to handle plug in generic_file_aio_write(). Note that plugging for O_SYNC writes is also removed. The user may pass arbitrary @size arguments, which may be much larger than the preferable I/O size, or may cross extent/device boundaries. Let the lower layers handle the plugging. The plugging code here actually turns them into no-ops. CC: Li Shaohua Signed-off-by: Wu Fengguang Signed-off-by: Jens Axboe --- mm/filemap.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/mm/filemap.c b/mm/filemap.c index fa5ca304148..2b0952974cb 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2527,14 +2527,12 @@ ssize_t generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov, { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; - struct blk_plug plug; ssize_t ret; BUG_ON(iocb->ki_pos != pos); sb_start_write(inode->i_sb); mutex_lock(&inode->i_mutex); - blk_start_plug(&plug); ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos); mutex_unlock(&inode->i_mutex); @@ -2545,7 +2543,6 @@ ssize_t generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov, if (err < 0 && ret > 0) ret = err; } - blk_finish_plug(&plug); sb_end_write(inode->i_sb); return ret; } -- cgit v1.2.3-70-g09d2 From 647d1e4c5235763b83fbfe74a09d148edc6ca152 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Thu, 9 Aug 2012 15:23:09 +0200 Subject: block: move down direct IO plugging Move unplugging for direct I/O from around ->direct_IO() down to do_blockdev_direct_IO(). This implicitly adds plugging for direct writes. CC: Li Shaohua Acked-by: Jeff Moyer Signed-off-by: Wu Fengguang Signed-off-by: Jens Axboe --- fs/direct-io.c | 5 +++++ mm/filemap.c | 4 ---- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/direct-io.c b/fs/direct-io.c index 1faf4cb56f3..f86c720dba0 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -1062,6 +1062,7 @@ do_blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, unsigned long user_addr; size_t bytes; struct buffer_head map_bh = { 0, }; + struct blk_plug plug; if (rw & WRITE) rw = WRITE_ODIRECT; @@ -1177,6 +1178,8 @@ do_blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, PAGE_SIZE - user_addr / PAGE_SIZE); } + blk_start_plug(&plug); + for (seg = 0; seg < nr_segs; seg++) { user_addr = (unsigned long)iov[seg].iov_base; sdio.size += bytes = iov[seg].iov_len; @@ -1235,6 +1238,8 @@ do_blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, if (sdio.bio) dio_bio_submit(dio, &sdio); + blk_finish_plug(&plug); + /* * It is possible that, we return short IO due to end of file. * In that case, we need to release all the pages we got hold on. diff --git a/mm/filemap.c b/mm/filemap.c index 2b0952974cb..384344575c3 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1412,12 +1412,8 @@ generic_file_aio_read(struct kiocb *iocb, const struct iovec *iov, retval = filemap_write_and_wait_range(mapping, pos, pos + iov_length(iov, nr_segs) - 1); if (!retval) { - struct blk_plug plug; - - blk_start_plug(&plug); retval = mapping->a_ops->direct_IO(READ, iocb, iov, pos, nr_segs); - blk_finish_plug(&plug); } if (retval > 0) { *ppos = pos + retval; -- cgit v1.2.3-70-g09d2 From 865826644e23c329297459b62ef9cc9904abf61a Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 9 Aug 2012 15:27:28 +0200 Subject: Documentation: update missing index files in block/00-INDEX Update missing index files in block/00-INDEX. Signed-off-by: Namjae Jeon Signed-off-by: Jens Axboe --- Documentation/block/00-INDEX | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index d111e3b23db..d18ecd827c4 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -3,15 +3,21 @@ biodoc.txt - Notes on the Generic Block Layer Rewrite in Linux 2.5 capability.txt - - Generic Block Device Capability (/sys/block//capability) + - Generic Block Device Capability (/sys/block//capability) +cfq-iosched.txt + - CFQ IO scheduler tunables +data-integrity.txt + - Block data integrity deadline-iosched.txt - Deadline IO scheduler tunables ioprio.txt - Block io priorities (in CFQ scheduler) +queue-sysfs.txt + - Queue's sysfs entries request.txt - The members of struct request (in include/linux/blkdev.h) stat.txt - - Block layer statistics in /sys/block//stat + - Block layer statistics in /sys/block//stat switching-sched.txt - Switching I/O schedulers at runtime writeback_cache_control.txt -- cgit v1.2.3-70-g09d2 From 2792d8719393a518a847769d36a080ade4273e6b Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 9 Aug 2012 15:27:29 +0200 Subject: Documentation: update tunable options in block/cfq-iosched.txt Update tunable options in block/cfq-iosched.txt. Signed-off-by: Namjae Jeon Signed-off-by: Jens Axboe --- Documentation/block/cfq-iosched.txt | 77 +++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt index 6d670f57045..d89b4fe724d 100644 --- a/Documentation/block/cfq-iosched.txt +++ b/Documentation/block/cfq-iosched.txt @@ -1,3 +1,14 @@ +CFQ (Complete Fairness Queueing) +=============================== + +The main aim of CFQ scheduler is to provide a fair allocation of the disk +I/O bandwidth for all the processes which requests an I/O operation. + +CFQ maintains the per process queue for the processes which request I/O +operation(syncronous requests). In case of asynchronous requests, all the +requests from all the processes are batched together according to their +process's I/O priority. + CFQ ioscheduler tunables ======================== @@ -25,6 +36,72 @@ there are multiple spindles behind single LUN (Host based hardware RAID controller or for storage arrays), setting slice_idle=0 might end up in better throughput and acceptable latencies. +back_seek_max +------------- +This specifies, given in Kbytes, the maximum "distance" for backward seeking. +The distance is the amount of space from the current head location to the +sectors that are backward in terms of distance. + +This parameter allows the scheduler to anticipate requests in the "backward" +direction and consider them as being the "next" if they are within this +distance from the current head location. + +back_seek_penalty +----------------- +This parameter is used to compute the cost of backward seeking. If the +backward distance of request is just 1/back_seek_penalty from a "front" +request, then the seeking cost of two requests is considered equivalent. + +So scheduler will not bias toward one or the other request (otherwise scheduler +will bias toward front request). Default value of back_seek_penalty is 2. + +fifo_expire_async +----------------- +This parameter is used to set the timeout of asynchronous requests. Default +value of this is 248ms. + +fifo_expire_sync +---------------- +This parameter is used to set the timeout of synchronous requests. Default +value of this is 124ms. In case to favor synchronous requests over asynchronous +one, this value should be decreased relative to fifo_expire_async. + +slice_async +----------- +This parameter is same as of slice_sync but for asynchronous queue. The +default value is 40ms. + +slice_async_rq +-------------- +This parameter is used to limit the dispatching of asynchronous request to +device request queue in queue's slice time. The maximum number of request that +are allowed to be dispatched also depends upon the io priority. Default value +for this is 2. + +slice_sync +---------- +When a queue is selected for execution, the queues IO requests are only +executed for a certain amount of time(time_slice) before switching to another +queue. This parameter is used to calculate the time slice of synchronous +queue. + +time_slice is computed using the below equation:- +time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the +time_slice of synchronous queue, increase the value of slice_sync. Default +value is 100ms. + +quantum +------- +This specifies the number of request dispatched to the device queue. In a +queue's time slice, a request will not be dispatched if the number of request +in the device exceeds this parameter. This parameter is used for synchronous +request. + +In case of storage with several disk, this setting can limit the parallel +processing of request. Therefore, increasing the value can imporve the +performace although this can cause the latency of some I/O to increase due +to more number of requests. + CFQ IOPS Mode for group scheduling =================================== Basic CFQ design is to provide priority based time slices. Higher priority -- cgit v1.2.3-70-g09d2 From 4004e90cfa4488cf99798b1138183158b64f4a42 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 9 Aug 2012 15:28:05 +0200 Subject: Documentation: update tunable options in block/cfq-iosched.txt Update tunable options in block/cfq-iosched.txt. Signed-off-by: Namjae Jeon Signed-off-by: Jens Axboe --- Documentation/block/queue-sysfs.txt | 64 +++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index 6518a55273e..e54ac1d5340 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -9,20 +9,71 @@ These files are the ones found in the /sys/block/xxx/queue/ directory. Files denoted with a RO postfix are readonly and the RW postfix means read-write. +add_random (RW) +---------------- +This file allows to trun off the disk entropy contribution. Default +value of this file is '1'(on). + +discard_granularity (RO) +----------------------- +This shows the size of internal allocation of the device in bytes, if +reported by the device. A value of '0' means device does not support +the discard functionality. + +discard_max_bytes (RO) +---------------------- +Devices that support discard functionality may have internal limits on +the number of bytes that can be trimmed or unmapped in a single operation. +The discard_max_bytes parameter is set by the device driver to the maximum +number of bytes that can be discarded in a single operation. Discard +requests issued to the device must not exceed this limit. A discard_max_bytes +value of 0 means that the device does not support discard functionality. + +discard_zeroes_data (RO) +------------------------ +When read, this file will show if the discarded block are zeroed by the +device or not. If its value is '1' the blocks are zeroed otherwise not. + hw_sector_size (RO) ------------------- This is the hardware sector size of the device, in bytes. +iostats (RW) +------------- +This file is used to control (on/off) the iostats accounting of the +disk. + +logical_block_size (RO) +----------------------- +This is the logcal block size of the device, in bytes. + max_hw_sectors_kb (RO) ---------------------- This is the maximum number of kilobytes supported in a single data transfer. +max_integrity_segments (RO) +--------------------------- +When read, this file shows the max limit of integrity segments as +set by block layer which a hardware controller can handle. + max_sectors_kb (RW) ------------------- This is the maximum number of kilobytes that the block layer will allow for a filesystem request. Must be smaller than or equal to the maximum size allowed by the hardware. +max_segments (RO) +----------------- +Maximum number of segments of the device. + +max_segment_size (RO) +--------------------- +Maximum segment size of the device. + +minimum_io_size (RO) +-------------------- +This is the smallest preferred io size reported by the device. + nomerges (RW) ------------- This enables the user to disable the lookup logic involved with IO @@ -45,11 +96,24 @@ per-block-cgroup request pool. IOW, if there are N block cgroups, each request queue may have upto N request pools, each independently regulated by nr_requests. +optimal_io_size (RO) +-------------------- +This is the optimal io size reported by the device. + +physical_block_size (RO) +------------------------ +This is the physical block size of device, in bytes. + read_ahead_kb (RW) ------------------ Maximum number of kilobytes to read-ahead for filesystems on this block device. +rotational (RW) +--------------- +This file is used to stat if the device is of rotational type or +non-rotational type. + rq_affinity (RW) ---------------- If this option is '1', the block layer will migrate request completions to the -- cgit v1.2.3-70-g09d2 From d34e4e00adbbc91ff9fc96ed9a4e4b65161868da Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 9 Aug 2012 15:47:15 +0200 Subject: ALSA: platform: Check CONFIG_PM_SLEEP instead of CONFIG_PM When CONFIG_PM is set but CONFIG_PM_SLEEP is unset, SIMPLE_DEV_PM_OPS() ignores the given functions, and this leads to compile warnings. For avoiding this, simply check CONFIG_PM_SLEEP instead of CONFIG_PM. Reported-by: Arnd Bergmann Signed-off-by: Takashi Iwai --- sound/arm/pxa2xx-ac97.c | 4 ++-- sound/atmel/abdac.c | 2 +- sound/atmel/ac97c.c | 2 +- sound/drivers/aloop.c | 2 +- sound/drivers/dummy.c | 2 +- sound/drivers/pcsp/pcsp.c | 4 ++-- sound/ppc/powermac.c | 2 +- 7 files changed, 9 insertions(+), 9 deletions(-) diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 0d7b25e8164..4e1fda75c1c 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -106,7 +106,7 @@ static struct pxa2xx_pcm_client pxa2xx_ac97_pcm_client = { .prepare = pxa2xx_ac97_pcm_prepare, }; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int pxa2xx_ac97_do_suspend(struct snd_card *card) { @@ -243,7 +243,7 @@ static struct platform_driver pxa2xx_ac97_driver = { .driver = { .name = "pxa2xx-ac97", .owner = THIS_MODULE, -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .pm = &pxa2xx_ac97_pm_ops, #endif }, diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c index eb4ceb71123..98554f4882b 100644 --- a/sound/atmel/abdac.c +++ b/sound/atmel/abdac.c @@ -534,7 +534,7 @@ out_put_pclk: return retval; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int atmel_abdac_suspend(struct device *pdev) { struct snd_card *card = dev_get_drvdata(pdev); diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index bf47025bdf4..3c8d3ba7ddf 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -1134,7 +1134,7 @@ err_snd_card_new: return retval; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int atmel_ac97c_suspend(struct device *pdev) { struct snd_card *card = dev_get_drvdata(pdev); diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index 1128b35b2b0..5a34355e78e 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -1176,7 +1176,7 @@ static int __devexit loopback_remove(struct platform_device *devptr) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int loopback_suspend(struct device *pdev) { struct snd_card *card = dev_get_drvdata(pdev); diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c index f7d3bfc6bca..54bb6644a59 100644 --- a/sound/drivers/dummy.c +++ b/sound/drivers/dummy.c @@ -1064,7 +1064,7 @@ static int __devexit snd_dummy_remove(struct platform_device *devptr) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int snd_dummy_suspend(struct device *pdev) { struct snd_card *card = dev_get_drvdata(pdev); diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c index 6ca59fc6dcb..ef171295f6d 100644 --- a/sound/drivers/pcsp/pcsp.c +++ b/sound/drivers/pcsp/pcsp.c @@ -199,7 +199,7 @@ static void pcsp_stop_beep(struct snd_pcsp *chip) pcspkr_stop_sound(); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int pcsp_suspend(struct device *dev) { struct snd_pcsp *chip = dev_get_drvdata(dev); @@ -212,7 +212,7 @@ static SIMPLE_DEV_PM_OPS(pcsp_pm, pcsp_suspend, NULL); #define PCSP_PM_OPS &pcsp_pm #else #define PCSP_PM_OPS NULL -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static void pcsp_shutdown(struct platform_device *dev) { diff --git a/sound/ppc/powermac.c b/sound/ppc/powermac.c index f5ceb6f282d..210cafe0489 100644 --- a/sound/ppc/powermac.c +++ b/sound/ppc/powermac.c @@ -143,7 +143,7 @@ static int __devexit snd_pmac_remove(struct platform_device *devptr) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int snd_pmac_driver_suspend(struct device *dev) { struct snd_card *card = dev_get_drvdata(dev); -- cgit v1.2.3-70-g09d2 From 5b6e3eb576e8ad03264d46982afed77bdc6323a3 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 9 Aug 2012 12:35:48 +0530 Subject: ARM: OMAP4: sleep: Save the complete used register stack frame OMAP4 sleep entry code even though itself don't use many CPU registers makes call to the v7_flush_dcache_all() which uses them. Since v7_flush_dcache_all() doesn't make use of stack, the caller must take care of the stack frame. Otherwise it will lead to corrupted stack frame. Fix it by saving used registers. Reported-by: Grygorii Strashko Signed-off-by: Santosh Shilimkar Cc: Kevin Hilman Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/sleep44xx.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d1b19..91e71d8f46f 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* -- cgit v1.2.3-70-g09d2 From 1b8652142334a8c0729c5c4536a22cfc6fc49297 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 9 Aug 2012 12:38:21 +0530 Subject: cpufreq: OMAP: Handle missing frequency table on SMP systems On OMAP4, if the first CPU fails to get a valid frequency table (this could happen if the platform does not register any OPP table), the subsequent CPU instances end up dealing with a NULL freq_table and crash. Check for an already existing freq_table, before trying to create one, and increment the freq_table_users only if the table is sucessfully created. Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Cc: Signed-off-by: Kevin Hilman --- drivers/cpufreq/omap-cpufreq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 17fa04d08be..b47034e650a 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -218,7 +218,7 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu); - if (atomic_inc_return(&freq_table_users) == 1) + if (!freq_table) result = opp_init_cpufreq_table(mpu_dev, &freq_table); if (result) { @@ -227,6 +227,8 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) goto fail_ck; } + atomic_inc_return(&freq_table_users); + result = cpufreq_frequency_table_cpuinfo(policy, freq_table); if (result) goto fail_table; -- cgit v1.2.3-70-g09d2 From 196449de0c886e64b48d01bd7ee153656db92884 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 9 Aug 2012 12:38:22 +0530 Subject: ARM: OMAP4: Register the OPP table only for 4430 device The 4430 OPP table was being registered for all other OMAP4 variants too, like 4460 and 4470 causing issues with cpufreq driver enabled. 4460 and 4470 devices have different OPPs as compared to 4430, and they should be populated seperately. As long as that happens, let the OPP table registeration happen only on 4430 device. Signed-off-by: Rajendra Nayak Acked-by: Santosh Shilimkar Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/opp4xxx_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba27101..c95415da23c 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, -- cgit v1.2.3-70-g09d2 From 144dad99ef6ad10c8c8ebe787d08157c4a94201f Mon Sep 17 00:00:00 2001 From: James Ralston Date: Thu, 9 Aug 2012 09:38:59 -0700 Subject: ALSA: hda_intel: Add Device IDs for Intel Lynx Point-LP PCH This patch adds the Intel HD Audio Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index c8aced182fd..60882c62f18 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -151,6 +151,7 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6}," "{Intel, CPT}," "{Intel, PPT}," "{Intel, LPT}," + "{Intel, LPT_LP}," "{Intel, HPT}," "{Intel, PBG}," "{Intel, SCH}," @@ -3270,6 +3271,14 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { { PCI_DEVICE(0x8086, 0x8c20), .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | AZX_DCAPS_POSFIX_COMBO }, + /* Lynx Point-LP */ + { PCI_DEVICE(0x8086, 0x9c20), + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | + AZX_DCAPS_BUFSIZE | AZX_DCAPS_POSFIX_COMBO }, + /* Lynx Point-LP */ + { PCI_DEVICE(0x8086, 0x9c21), + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | + AZX_DCAPS_BUFSIZE | AZX_DCAPS_POSFIX_COMBO }, /* Haswell */ { PCI_DEVICE(0x8086, 0x0c0c), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP | -- cgit v1.2.3-70-g09d2 From fb099cb712e878b9eb4e78dd6b268312a0b2b50f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 9 Aug 2012 18:44:37 +0100 Subject: ASoC: core: Upgrade the severity of probe deferral errors to dev_err() In the past when ASoC had a custom probe deferral mechanism people complained about the logspam it generated and didn't want to know about the fact that we were doing probe deferral so all the error messages for it were at dev_dbg(), making diagnostics hard. Now that we have probe deferral as an accepted thing and it's generating log messages anyway there's no need to worry about this so upgrade the severity of all the probe deferral sources to dev_err() so that they are displayed by default. Also add one for missing aux_devs since there wasn't one. Reported-by: Russell King Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index f81c5976b96..c501af6d8db 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -826,7 +826,7 @@ static int soc_bind_dai_link(struct snd_soc_card *card, int num) } if (!rtd->cpu_dai) { - dev_dbg(card->dev, "CPU DAI %s not registered\n", + dev_err(card->dev, "CPU DAI %s not registered\n", dai_link->cpu_dai_name); return -EPROBE_DEFER; } @@ -857,14 +857,14 @@ static int soc_bind_dai_link(struct snd_soc_card *card, int num) } if (!rtd->codec_dai) { - dev_dbg(card->dev, "CODEC DAI %s not registered\n", + dev_err(card->dev, "CODEC DAI %s not registered\n", dai_link->codec_dai_name); return -EPROBE_DEFER; } } if (!rtd->codec) { - dev_dbg(card->dev, "CODEC %s not registered\n", + dev_err(card->dev, "CODEC %s not registered\n", dai_link->codec_name); return -EPROBE_DEFER; } @@ -888,7 +888,7 @@ static int soc_bind_dai_link(struct snd_soc_card *card, int num) rtd->platform = platform; } if (!rtd->platform) { - dev_dbg(card->dev, "platform %s not registered\n", + dev_err(card->dev, "platform %s not registered\n", dai_link->platform_name); return -EPROBE_DEFER; } @@ -1481,6 +1481,8 @@ static int soc_check_aux_dev(struct snd_soc_card *card, int num) return 0; } + dev_err(card->dev, "%s not registered\n", aux_dev->codec_name); + return -EPROBE_DEFER; } -- cgit v1.2.3-70-g09d2 From b2a1ef473b031b630a26685c91a46b9ae668d35c Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 9 Aug 2012 16:33:00 +0200 Subject: regulator: core: request only valid gpio pins for regulator enable Commit 65f735082de3 ("regulator: core: Add core support for GPIO controlled enable lines") introduced enable gpio entry in regulator configuration structure. Some drivers use '-1' as a placeholder for marking that such gpio line is not available, because '0' is considered as a valid gpio number. This patch fixes initialization of such drivers (like MAX8952 on UniversalC210 board), when '-1' is provided as enable gpio pin in the regulator's platform data. Signed-off-by: Marek Szyprowski Signed-off-by: Mark Brown --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index f092588a078..48385318175 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3217,7 +3217,7 @@ regulator_register(const struct regulator_desc *regulator_desc, dev_set_drvdata(&rdev->dev, rdev); - if (config->ena_gpio) { + if (config->ena_gpio && gpio_is_valid(config->ena_gpio)) { ret = gpio_request_one(config->ena_gpio, GPIOF_DIR_OUT | config->ena_gpio_flags, rdev_get_name(rdev)); -- cgit v1.2.3-70-g09d2 From e95829f474f0db3a4d940cae1423783edd966027 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 23 Jul 2012 18:59:30 +0300 Subject: xhci: Switch PPT ports to EHCI on shutdown. The Intel desktop boards DH77EB and DH77DF have a hardware issue that can be worked around by BIOS. If the USB ports are switched to xHCI on shutdown, the xHCI host will send a spurious interrupt, which will wake the system. Some BIOS will work around this, but not all. The bug can be avoided if the USB ports are switched back to EHCI on shutdown. The Intel Windows driver switches the ports back to EHCI, so change the Linux xHCI driver to do the same. Unfortunately, we can't tell the two effected boards apart from other working motherboards, because the vendors will change the DMI strings for the DH77EB and DH77DF boards to their own custom names. One example is Compulab's mini-desktop, the Intense-PC. Instead, key off the Panther Point xHCI host PCI vendor and device ID, and switch the ports over for all PPT xHCI hosts. The only impact this will have on non-effected boards is to add a couple hundred milliseconds delay on boot when the BIOS has to switch the ports over from EHCI to xHCI. This patch should be backported to kernels as old as 3.0, that contain the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Sarah Sharp Reported-by: Denis Turischev Tested-by: Denis Turischev Cc: stable@vger.kernel.org --- drivers/usb/host/pci-quirks.c | 7 +++++++ drivers/usb/host/pci-quirks.h | 1 + drivers/usb/host/xhci-pci.c | 9 +++++++++ drivers/usb/host/xhci.c | 3 +++ drivers/usb/host/xhci.h | 1 + 5 files changed, 21 insertions(+) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index df0828cb2aa..c5e9e4a76f1 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -800,6 +800,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) } EXPORT_SYMBOL_GPL(usb_enable_xhci_ports); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) +{ + pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0); + pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0); +} +EXPORT_SYMBOL_GPL(usb_disable_xhci_ports); + /** * PCI Quirks for xHCI. * diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index b1002a8ef96..ef004a5de20 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -10,6 +10,7 @@ void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); void usb_enable_xhci_ports(struct pci_dev *xhci_pdev); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); #else static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 92eaff6097c..9bfd4ca1153 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -94,6 +94,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; xhci->quirks |= XHCI_SW_BW_CHECKING; + /* + * PPT desktop boards DH77EB and DH77DF will power back on after + * a few seconds of being shutdown. The fix for this is to + * switch the ports from xHCI to EHCI on shutdown. We can't use + * DMI information to find those particular boards (since each + * vendor will change the board name), so we have to key off all + * PPT chipsets. + */ + xhci->quirks |= XHCI_SPURIOUS_REBOOT; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 5c3a3f75e4d..c59d5b5b6c7 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -659,6 +659,9 @@ void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + if (xhci->quirks && XHCI_SPURIOUS_REBOOT) + usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); + spin_lock_irq(&xhci->lock); xhci_halt(xhci); spin_unlock_irq(&xhci->lock); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 96f49dbb50a..c713256297a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1494,6 +1494,7 @@ struct xhci_hcd { #define XHCI_TRUST_TX_LENGTH (1 << 10) #define XHCI_LPM_SUPPORT (1 << 11) #define XHCI_INTEL_HOST (1 << 12) +#define XHCI_SPURIOUS_REBOOT (1 << 13) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ -- cgit v1.2.3-70-g09d2 From 32ab31e01e2def6f48294d872d9bb42573aae00f Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 8 Aug 2012 08:27:03 -0500 Subject: irq_remap: disable IRQ remapping if any IOAPIC lacks an IOMMU The ACPI tables in the Macbook Air 5,1 define a single IOAPIC with id 2, but the only remapping unit described in the DMAR table matches id 0. Interrupt remapping fails as a result, and the kernel panics with the message "timer doesn't work through Interrupt-remapped IO-APIC." To fix this, check each IOAPIC for a corresponding IOMMU. If an IOMMU is not found, do not allow IRQ remapping to be enabled. v2: Move check to parse_ioapics_under_ir(), raise log level to KERN_ERR, and add FW_BUG to the log message v3: Skip check if IOMMU doesn't support interrupt remapping and remove existing check that the IOMMU count equals the IOAPIC count Acked-by: Suresh Siddha Signed-off-by: Seth Forshee Acked-by: Yinghai Lu Signed-off-by: Joerg Roedel --- drivers/iommu/intel_irq_remapping.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c index e0b18f3ae9a..af8904de1d4 100644 --- a/drivers/iommu/intel_irq_remapping.c +++ b/drivers/iommu/intel_irq_remapping.c @@ -736,6 +736,7 @@ int __init parse_ioapics_under_ir(void) { struct dmar_drhd_unit *drhd; int ir_supported = 0; + int ioapic_idx; for_each_drhd_unit(drhd) { struct intel_iommu *iommu = drhd->iommu; @@ -748,13 +749,20 @@ int __init parse_ioapics_under_ir(void) } } - if (ir_supported && ir_ioapic_num != nr_ioapics) { - printk(KERN_WARNING - "Not all IO-APIC's listed under remapping hardware\n"); - return -1; + if (!ir_supported) + return 0; + + for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) { + int ioapic_id = mpc_ioapic_id(ioapic_idx); + if (!map_ioapic_to_ir(ioapic_id)) { + pr_err(FW_BUG "ioapic %d has no mapping iommu, " + "interrupt remapping will be disabled\n", + ioapic_id); + return -1; + } } - return ir_supported; + return 1; } int __init ir_dev_scope_init(void) -- cgit v1.2.3-70-g09d2 From 2bd5ed002c0c493ac328f13a9e2a504261a7d48e Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 10 Aug 2012 11:34:08 +0200 Subject: iommu/amd: Fix wrong check for ARRAY_SIZE() The check in the for-loop is broken. Fix it and the boot-crash it causes in AMD IOMMUv2 systems. Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 0a2ea317120..18a89b760aa 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -1111,7 +1111,7 @@ static void print_iommu_info(void) if (iommu->cap & (1 << IOMMU_CAP_EFR)) { pr_info("AMD-Vi: Extended features: "); - for (i = 0; ARRAY_SIZE(feat_str); ++i) { + for (i = 0; i < ARRAY_SIZE(feat_str); ++i) { if (iommu_feature(iommu, (1ULL << i))) pr_cont(" %s", feat_str[i]); } -- cgit v1.2.3-70-g09d2 From e9324b2ce656e1910d2385b9b47a2f926456dbe3 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 9 Aug 2012 10:08:45 +0000 Subject: netfilter: nf_ct_sip: fix helper name Commit 3a8fc53a (netfilter: nf_ct_helper: allocate 16 bytes for the helper and policy names) introduced a bug in the SIP helper, the helper name is sprinted to the sip_names array instead of instead of into the helper structure. This breaks the helper match and the /proc/net/nf_conntrack_expect output. Signed-off-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_sip.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 758a1bacc12..2fb666920cc 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -1515,7 +1515,6 @@ static int sip_help_udp(struct sk_buff *skb, unsigned int protoff, } static struct nf_conntrack_helper sip[MAX_PORTS][4] __read_mostly; -static char sip_names[MAX_PORTS][4][sizeof("sip-65535")] __read_mostly; static const struct nf_conntrack_expect_policy sip_exp_policy[SIP_EXPECT_MAX + 1] = { [SIP_EXPECT_SIGNALLING] = { @@ -1585,9 +1584,9 @@ static int __init nf_conntrack_sip_init(void) sip[i][j].me = THIS_MODULE; if (ports[i] == SIP_PORT) - sprintf(sip_names[i][j], "sip"); + sprintf(sip[i][j].name, "sip"); else - sprintf(sip_names[i][j], "sip-%u", i); + sprintf(sip[i][j].name, "sip-%u", i); pr_debug("port #%u: %u\n", i, ports[i]); -- cgit v1.2.3-70-g09d2 From 02b69cbdc2fb2e1bfbfd9ac0c246d7be1b08d3cd Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 9 Aug 2012 10:08:46 +0000 Subject: netfilter: nf_ct_sip: fix IPv6 address parsing Within SIP messages IPv6 addresses are enclosed in square brackets in most cases, with the exception of the "received=" header parameter. Currently the helper fails to parse enclosed addresses. This patch: - changes the SIP address parsing function to enforce square brackets when required, and accept them when not required but present, as recommended by RFC 5118. - adds a new SDP address parsing function that never accepts square brackets since SDP doesn't use them. With these changes, the SIP helper correctly parses all test messages from RFC 5118 (Session Initiation Protocol (SIP) Torture Test Messages for Internet Protocol Version 6 (IPv6)). Signed-off-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nf_conntrack_sip.h | 2 +- net/ipv4/netfilter/nf_nat_sip.c | 4 +- net/netfilter/nf_conntrack_sip.c | 87 ++++++++++++++++++++++++------ 3 files changed, 73 insertions(+), 20 deletions(-) diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h index 0dfc8b7210a..89f2a627f3f 100644 --- a/include/linux/netfilter/nf_conntrack_sip.h +++ b/include/linux/netfilter/nf_conntrack_sip.h @@ -164,7 +164,7 @@ extern int ct_sip_parse_address_param(const struct nf_conn *ct, const char *dptr unsigned int dataoff, unsigned int datalen, const char *name, unsigned int *matchoff, unsigned int *matchlen, - union nf_inet_addr *addr); + union nf_inet_addr *addr, bool delim); extern int ct_sip_parse_numerical_param(const struct nf_conn *ct, const char *dptr, unsigned int off, unsigned int datalen, const char *name, diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c index ea4a23813d2..eef8f29e8bf 100644 --- a/net/ipv4/netfilter/nf_nat_sip.c +++ b/net/ipv4/netfilter/nf_nat_sip.c @@ -173,7 +173,7 @@ static unsigned int ip_nat_sip(struct sk_buff *skb, unsigned int dataoff, * the reply. */ if (ct_sip_parse_address_param(ct, *dptr, matchend, *datalen, "maddr=", &poff, &plen, - &addr) > 0 && + &addr, true) > 0 && addr.ip == ct->tuplehash[dir].tuple.src.u3.ip && addr.ip != ct->tuplehash[!dir].tuple.dst.u3.ip) { buflen = sprintf(buffer, "%pI4", @@ -187,7 +187,7 @@ static unsigned int ip_nat_sip(struct sk_buff *skb, unsigned int dataoff, * from which the server received the request. */ if (ct_sip_parse_address_param(ct, *dptr, matchend, *datalen, "received=", &poff, &plen, - &addr) > 0 && + &addr, false) > 0 && addr.ip == ct->tuplehash[dir].tuple.dst.u3.ip && addr.ip != ct->tuplehash[!dir].tuple.src.u3.ip) { buflen = sprintf(buffer, "%pI4", diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 2fb666920cc..5c0a112aeee 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -183,12 +183,12 @@ static int media_len(const struct nf_conn *ct, const char *dptr, return len + digits_len(ct, dptr, limit, shift); } -static int parse_addr(const struct nf_conn *ct, const char *cp, - const char **endp, union nf_inet_addr *addr, - const char *limit) +static int sip_parse_addr(const struct nf_conn *ct, const char *cp, + const char **endp, union nf_inet_addr *addr, + const char *limit, bool delim) { const char *end; - int ret = 0; + int ret; if (!ct) return 0; @@ -197,16 +197,28 @@ static int parse_addr(const struct nf_conn *ct, const char *cp, switch (nf_ct_l3num(ct)) { case AF_INET: ret = in4_pton(cp, limit - cp, (u8 *)&addr->ip, -1, &end); + if (ret == 0) + return 0; break; case AF_INET6: + if (cp < limit && *cp == '[') + cp++; + else if (delim) + return 0; + ret = in6_pton(cp, limit - cp, (u8 *)&addr->ip6, -1, &end); + if (ret == 0) + return 0; + + if (end < limit && *end == ']') + end++; + else if (delim) + return 0; break; default: BUG(); } - if (ret == 0 || end == cp) - return 0; if (endp) *endp = end; return 1; @@ -219,7 +231,7 @@ static int epaddr_len(const struct nf_conn *ct, const char *dptr, union nf_inet_addr addr; const char *aux = dptr; - if (!parse_addr(ct, dptr, &dptr, &addr, limit)) { + if (!sip_parse_addr(ct, dptr, &dptr, &addr, limit, true)) { pr_debug("ip: %s parse failed.!\n", dptr); return 0; } @@ -296,7 +308,7 @@ int ct_sip_parse_request(const struct nf_conn *ct, return 0; dptr += shift; - if (!parse_addr(ct, dptr, &end, addr, limit)) + if (!sip_parse_addr(ct, dptr, &end, addr, limit, true)) return -1; if (end < limit && *end == ':') { end++; @@ -550,7 +562,7 @@ int ct_sip_parse_header_uri(const struct nf_conn *ct, const char *dptr, if (ret == 0) return ret; - if (!parse_addr(ct, dptr + *matchoff, &c, addr, limit)) + if (!sip_parse_addr(ct, dptr + *matchoff, &c, addr, limit, true)) return -1; if (*c == ':') { c++; @@ -599,7 +611,7 @@ int ct_sip_parse_address_param(const struct nf_conn *ct, const char *dptr, unsigned int dataoff, unsigned int datalen, const char *name, unsigned int *matchoff, unsigned int *matchlen, - union nf_inet_addr *addr) + union nf_inet_addr *addr, bool delim) { const char *limit = dptr + datalen; const char *start, *end; @@ -613,7 +625,7 @@ int ct_sip_parse_address_param(const struct nf_conn *ct, const char *dptr, return 0; start += strlen(name); - if (!parse_addr(ct, start, &end, addr, limit)) + if (!sip_parse_addr(ct, start, &end, addr, limit, delim)) return 0; *matchoff = start - dptr; *matchlen = end - start; @@ -675,6 +687,47 @@ static int ct_sip_parse_transport(struct nf_conn *ct, const char *dptr, return 1; } +static int sdp_parse_addr(const struct nf_conn *ct, const char *cp, + const char **endp, union nf_inet_addr *addr, + const char *limit) +{ + const char *end; + int ret; + + memset(addr, 0, sizeof(*addr)); + switch (nf_ct_l3num(ct)) { + case AF_INET: + ret = in4_pton(cp, limit - cp, (u8 *)&addr->ip, -1, &end); + break; + case AF_INET6: + ret = in6_pton(cp, limit - cp, (u8 *)&addr->ip6, -1, &end); + break; + default: + BUG(); + } + + if (ret == 0) + return 0; + if (endp) + *endp = end; + return 1; +} + +/* skip ip address. returns its length. */ +static int sdp_addr_len(const struct nf_conn *ct, const char *dptr, + const char *limit, int *shift) +{ + union nf_inet_addr addr; + const char *aux = dptr; + + if (!sdp_parse_addr(ct, dptr, &dptr, &addr, limit)) { + pr_debug("ip: %s parse failed.!\n", dptr); + return 0; + } + + return dptr - aux; +} + /* SDP header parsing: a SDP session description contains an ordered set of * headers, starting with a section containing general session parameters, * optionally followed by multiple media descriptions. @@ -686,10 +739,10 @@ static int ct_sip_parse_transport(struct nf_conn *ct, const char *dptr, */ static const struct sip_header ct_sdp_hdrs[] = { [SDP_HDR_VERSION] = SDP_HDR("v=", NULL, digits_len), - [SDP_HDR_OWNER_IP4] = SDP_HDR("o=", "IN IP4 ", epaddr_len), - [SDP_HDR_CONNECTION_IP4] = SDP_HDR("c=", "IN IP4 ", epaddr_len), - [SDP_HDR_OWNER_IP6] = SDP_HDR("o=", "IN IP6 ", epaddr_len), - [SDP_HDR_CONNECTION_IP6] = SDP_HDR("c=", "IN IP6 ", epaddr_len), + [SDP_HDR_OWNER_IP4] = SDP_HDR("o=", "IN IP4 ", sdp_addr_len), + [SDP_HDR_CONNECTION_IP4] = SDP_HDR("c=", "IN IP4 ", sdp_addr_len), + [SDP_HDR_OWNER_IP6] = SDP_HDR("o=", "IN IP6 ", sdp_addr_len), + [SDP_HDR_CONNECTION_IP6] = SDP_HDR("c=", "IN IP6 ", sdp_addr_len), [SDP_HDR_MEDIA] = SDP_HDR("m=", NULL, media_len), }; @@ -775,8 +828,8 @@ static int ct_sip_parse_sdp_addr(const struct nf_conn *ct, const char *dptr, if (ret <= 0) return ret; - if (!parse_addr(ct, dptr + *matchoff, NULL, addr, - dptr + *matchoff + *matchlen)) + if (!sdp_parse_addr(ct, dptr + *matchoff, NULL, addr, + dptr + *matchoff + *matchlen)) return -1; return 1; } -- cgit v1.2.3-70-g09d2 From f22eb25cf5b1157b29ef88c793b71972efc47143 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 9 Aug 2012 10:08:47 +0000 Subject: netfilter: nf_nat_sip: fix via header translation with multiple parameters Via-headers are parsed beginning at the first character after the Via-address. When the address is translated first and its length decreases, the offset to start parsing at is incorrect and header parameters might be missed. Update the offset after translating the Via-address to fix this. Signed-off-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/nf_nat_sip.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c index eef8f29e8bf..4ad9cf17399 100644 --- a/net/ipv4/netfilter/nf_nat_sip.c +++ b/net/ipv4/netfilter/nf_nat_sip.c @@ -148,7 +148,7 @@ static unsigned int ip_nat_sip(struct sk_buff *skb, unsigned int dataoff, if (ct_sip_parse_header_uri(ct, *dptr, NULL, *datalen, hdr, NULL, &matchoff, &matchlen, &addr, &port) > 0) { - unsigned int matchend, poff, plen, buflen, n; + unsigned int olen, matchend, poff, plen, buflen, n; char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")]; /* We're only interested in headers related to this @@ -163,11 +163,12 @@ static unsigned int ip_nat_sip(struct sk_buff *skb, unsigned int dataoff, goto next; } + olen = *datalen; if (!map_addr(skb, dataoff, dptr, datalen, matchoff, matchlen, &addr, port)) return NF_DROP; - matchend = matchoff + matchlen; + matchend = matchoff + matchlen + *datalen - olen; /* The maddr= parameter (RFC 2361) specifies where to send * the reply. */ -- cgit v1.2.3-70-g09d2 From 9c30959884261518de46e0b79ac7a902e6ddd147 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 23 Jun 2012 11:25:43 +0100 Subject: MAINTAINERS: Add entries for Wolfson Arizona class devices Signed-off-by: Mark Brown --- MAINTAINERS | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 94b823f71e9..dba8941fb42 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7665,23 +7665,28 @@ S: Supported F: Documentation/hwmon/wm83?? F: arch/arm/mach-s3c64xx/mach-crag6410* F: drivers/clk/clk-wm83*.c +F: drivers/extcon/extcon-arizona.c F: drivers/leds/leds-wm83*.c F: drivers/gpio/gpio-*wm*.c +F: drivers/gpio/gpio-arizona.c F: drivers/hwmon/wm83??-hwmon.c F: drivers/input/misc/wm831x-on.c F: drivers/input/touchscreen/wm831x-ts.c F: drivers/input/touchscreen/wm97*.c -F: drivers/mfd/wm8*.c +F: drivers/mfd/arizona* +F: drivers/mfd/wm*.c F: drivers/power/wm83*.c F: drivers/rtc/rtc-wm83*.c F: drivers/regulator/wm8*.c F: drivers/video/backlight/wm83*_bl.c F: drivers/watchdog/wm83*_wdt.c +F: include/linux/mfd/arizona/ F: include/linux/mfd/wm831x/ F: include/linux/mfd/wm8350/ F: include/linux/mfd/wm8400* F: include/linux/wm97xx.h F: include/sound/wm????.h +F: sound/soc/codecs/arizona.? F: sound/soc/codecs/wm* WORKQUEUE -- cgit v1.2.3-70-g09d2 From de64c0ee7dbcbfbbe63bd9ea45783d87babc6452 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 10 Aug 2012 12:22:58 +0300 Subject: ALSA: cs46xx - signedness bug in snd_cs46xx_codec_read() This function returns its own error codes instead of normal negative error codes. Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai --- sound/pci/cs46xx/cs46xx_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c index f75f5ffdfdf..a71d1c14a0f 100644 --- a/sound/pci/cs46xx/cs46xx_lib.c +++ b/sound/pci/cs46xx/cs46xx_lib.c @@ -94,7 +94,7 @@ static unsigned short snd_cs46xx_codec_read(struct snd_cs46xx *chip, if (snd_BUG_ON(codec_index != CS46XX_PRIMARY_CODEC_INDEX && codec_index != CS46XX_SECONDARY_CODEC_INDEX)) - return -EINVAL; + return 0xffff; chip->active_ctrl(chip, 1); -- cgit v1.2.3-70-g09d2 From 14bc9c6dc694e2d7930802f7afd275de25ef8394 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 10 Aug 2012 13:29:32 +0200 Subject: ALSA: hda - Fix panned "Beep Playback Switch" When "Beep Playback Switch" had a different value on left and right channels (such as muting left but not right, or vice versa), this could result in the right channel being ignored. This patch enables beep to be sounding from right channel only, and also give correct result back to userspace (e g amixer). Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index 0bc2315b181..d26ae65b43b 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -237,10 +237,9 @@ int snd_hda_mixer_amp_switch_get_beep(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct hda_beep *beep = codec->beep; - if (beep) { + if (beep && !beep->enabled) { ucontrol->value.integer.value[0] = - ucontrol->value.integer.value[1] = - beep->enabled; + ucontrol->value.integer.value[1] = 0; return 0; } return snd_hda_mixer_amp_switch_get(kcontrol, ucontrol); @@ -252,9 +251,18 @@ int snd_hda_mixer_amp_switch_put_beep(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct hda_beep *beep = codec->beep; - if (beep) - snd_hda_enable_beep_device(codec, - *ucontrol->value.integer.value); + if (beep) { + u8 chs = get_amp_channels(kcontrol); + int enable = 0; + long *valp = ucontrol->value.integer.value; + if (chs & 1) { + enable |= *valp; + valp++; + } + if (chs & 2) + enable |= *valp; + snd_hda_enable_beep_device(codec, enable); + } return snd_hda_mixer_amp_switch_put(kcontrol, ucontrol); } EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_put_beep); -- cgit v1.2.3-70-g09d2 From e037cb4a54e26b5f55f856e0e7445cfcfb2f3d31 Mon Sep 17 00:00:00 2001 From: Mengdong Lin Date: Fri, 10 Aug 2012 14:11:58 +0200 Subject: ALSA : hda - bug fix on checking the supported power states of a codec The return value of snd_hda_param_read() is -1 for an error, otherwise it's the supported power states of a codec. The supported power states is a 32-bit value. Bit 31 will be set to 1 if the codec supports EPSS, thus making "sup" negative. And the bit 28:5 is reserved as "0". So a negative value other than -1 shall be further checked. Please refer to High-Definition spec 7.3.4.12 "Supported Power States", thanks! Signed-off-by: Mengdong Lin Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 88a9c20eb7a..629131ad7b8 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3497,7 +3497,7 @@ static bool snd_hda_codec_get_supported_ps(struct hda_codec *codec, hda_nid_t fg { int sup = snd_hda_param_read(codec, fg, AC_PAR_POWER_STATE); - if (sup < 0) + if (sup == -1) return false; if (sup & power_state) return true; -- cgit v1.2.3-70-g09d2 From 8e90e4cc33ac44fd58635dc1aa94d3fd2145e518 Mon Sep 17 00:00:00 2001 From: Zhao Chenhui Date: Tue, 7 Aug 2012 17:12:47 +0800 Subject: powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS Signed-off-by: Zhao Chenhui Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc85xx_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 03ee911c457..99a4dd3b30c 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -115,6 +115,7 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_FSL=y CONFIG_PATA_ALI=y +CONFIG_PATA_VIA=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_FS_ENET=y -- cgit v1.2.3-70-g09d2 From 09a3017a585eb8567a7de15b426bb1dfb548bf0f Mon Sep 17 00:00:00 2001 From: Shengzhou Liu Date: Fri, 10 Aug 2012 18:48:31 +0800 Subject: powerpc/p4080ds: dts - add usb controller version info and port0 Add the missing usb controller version info and port0, which is required during setup usb phy. Signed-off-by: Shengzhou Liu Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 8d35d2c1f69..4f9c9f682ec 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -345,6 +345,13 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" + usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" + usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + }; /include/ "qoriq-sec4.0-0.dtsi" }; -- cgit v1.2.3-70-g09d2 From c0db19dabf138741e078f6391fb132821c0d98b5 Mon Sep 17 00:00:00 2001 From: Yuanhan Liu Date: Wed, 8 Aug 2012 17:02:08 +0800 Subject: ARM: mmp: fix potential NULL dereference Fix the wrong logic: we should use || instead of && Cc: Leo Yan Cc: Eric Miao Signed-off-by: Yuanhan Liu Signed-off-by: Haojian Zhuang --- arch/arm/mach-mmp/sram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 4304f951937..7e8a5a2e1ec 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev) struct resource *res; int ret = 0; - if (!pdata && !pdata->pool_name) + if (!pdata || !pdata->pool_name) return -ENODEV; info = kzalloc(sizeof(*info), GFP_KERNEL); -- cgit v1.2.3-70-g09d2 From 61f5d61ef94d7082d96494e2a6dd79de2b4437d2 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 Aug 2012 11:34:43 +0530 Subject: ASoC: Samsung: Fix build error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes the following build error: In file included from arch/arm/mach-exynos/include/mach/dma.h:24:0, from arch/arm/plat-samsung/include/plat/dma-ops.h:17, from arch/arm/plat-samsung/include/plat/dma.h:128, from sound/soc/samsung/pcm.c:23: arch/arm/plat-samsung/include/plat/dma-pl330.h:106:8: error: redefinition of ‘struct s3c2410_dma_client’ arch/arm/plat-samsung/include/plat/dma.h:40:8: note: originally defined here make[3]: *** [sound/soc/samsung/pcm.o] Error 1 Signed-off-by: Sachin Kamat Signed-off-by: Sachin Kamat Acked-by: Kukjin Kim Signed-off-by: Mark Brown --- sound/soc/samsung/pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c index b7b2a1f9142..89b064650f1 100644 --- a/sound/soc/samsung/pcm.c +++ b/sound/soc/samsung/pcm.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include "dma.h" #include "pcm.h" -- cgit v1.2.3-70-g09d2 From 7724a1edbe463b06d4e7831a41149ba095b16c53 Mon Sep 17 00:00:00 2001 From: Ozan Çağlayan Date: Fri, 10 Aug 2012 17:25:10 +0300 Subject: USB: ftdi_sio: Add VID/PID for Kondo Serial USB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter interface: http://www.kondo-robot.com/EN/wp/?cat=28 Tested by controlling an RCB3 board using libRCB3. Signed-off-by: Ozan Çağlayan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index bc912e5a3be..5620db6469e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -811,6 +811,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) }, { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) }, { USB_DEVICE(PI_VID, PI_E861_PID) }, + { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) }, { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 5661c7e2d41..5dd96ca6c38 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -794,6 +794,13 @@ #define PI_VID 0x1a72 /* Vendor ID */ #define PI_E861_PID 0x1008 /* E-861 piezo controller USB connection */ +/* + * Kondo Kagaku Co.Ltd. + * http://www.kondo-robot.com/EN + */ +#define KONDO_VID 0x165c +#define KONDO_USB_SERIAL_PID 0x0002 + /* * Bayer Ascensia Contour blood glucose meter USB-converter cable. * http://winglucofacts.com/cables/ -- cgit v1.2.3-70-g09d2 From ee6f827df9107139e8960326e49e1376352ced4d Mon Sep 17 00:00:00 2001 From: fangxiaozhi Date: Wed, 8 Aug 2012 09:24:45 +0000 Subject: USB: support the new interfaces of Huawei Data Card devices in option driver In this patch, we add new declarations into option.c to support the new interfaces of Huawei Data Card devices. And at the same time, remove the redundant declarations from option.c. Signed-off-by: fangxiaozhi Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 279 ++++++++++++++++++-------------------------- 1 file changed, 111 insertions(+), 168 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 08ff9b86204..b09388606dc 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -80,85 +80,9 @@ static void option_instat_callback(struct urb *urb); #define OPTION_PRODUCT_GTM380_MODEM 0x7201 #define HUAWEI_VENDOR_ID 0x12D1 -#define HUAWEI_PRODUCT_E600 0x1001 -#define HUAWEI_PRODUCT_E220 0x1003 -#define HUAWEI_PRODUCT_E220BIS 0x1004 -#define HUAWEI_PRODUCT_E1401 0x1401 -#define HUAWEI_PRODUCT_E1402 0x1402 -#define HUAWEI_PRODUCT_E1403 0x1403 -#define HUAWEI_PRODUCT_E1404 0x1404 -#define HUAWEI_PRODUCT_E1405 0x1405 -#define HUAWEI_PRODUCT_E1406 0x1406 -#define HUAWEI_PRODUCT_E1407 0x1407 -#define HUAWEI_PRODUCT_E1408 0x1408 -#define HUAWEI_PRODUCT_E1409 0x1409 -#define HUAWEI_PRODUCT_E140A 0x140A -#define HUAWEI_PRODUCT_E140B 0x140B -#define HUAWEI_PRODUCT_E140C 0x140C -#define HUAWEI_PRODUCT_E140D 0x140D -#define HUAWEI_PRODUCT_E140E 0x140E -#define HUAWEI_PRODUCT_E140F 0x140F -#define HUAWEI_PRODUCT_E1410 0x1410 -#define HUAWEI_PRODUCT_E1411 0x1411 -#define HUAWEI_PRODUCT_E1412 0x1412 -#define HUAWEI_PRODUCT_E1413 0x1413 -#define HUAWEI_PRODUCT_E1414 0x1414 -#define HUAWEI_PRODUCT_E1415 0x1415 -#define HUAWEI_PRODUCT_E1416 0x1416 -#define HUAWEI_PRODUCT_E1417 0x1417 -#define HUAWEI_PRODUCT_E1418 0x1418 -#define HUAWEI_PRODUCT_E1419 0x1419 -#define HUAWEI_PRODUCT_E141A 0x141A -#define HUAWEI_PRODUCT_E141B 0x141B -#define HUAWEI_PRODUCT_E141C 0x141C -#define HUAWEI_PRODUCT_E141D 0x141D -#define HUAWEI_PRODUCT_E141E 0x141E -#define HUAWEI_PRODUCT_E141F 0x141F -#define HUAWEI_PRODUCT_E1420 0x1420 -#define HUAWEI_PRODUCT_E1421 0x1421 -#define HUAWEI_PRODUCT_E1422 0x1422 -#define HUAWEI_PRODUCT_E1423 0x1423 -#define HUAWEI_PRODUCT_E1424 0x1424 -#define HUAWEI_PRODUCT_E1425 0x1425 -#define HUAWEI_PRODUCT_E1426 0x1426 -#define HUAWEI_PRODUCT_E1427 0x1427 -#define HUAWEI_PRODUCT_E1428 0x1428 -#define HUAWEI_PRODUCT_E1429 0x1429 -#define HUAWEI_PRODUCT_E142A 0x142A -#define HUAWEI_PRODUCT_E142B 0x142B -#define HUAWEI_PRODUCT_E142C 0x142C -#define HUAWEI_PRODUCT_E142D 0x142D -#define HUAWEI_PRODUCT_E142E 0x142E -#define HUAWEI_PRODUCT_E142F 0x142F -#define HUAWEI_PRODUCT_E1430 0x1430 -#define HUAWEI_PRODUCT_E1431 0x1431 -#define HUAWEI_PRODUCT_E1432 0x1432 -#define HUAWEI_PRODUCT_E1433 0x1433 -#define HUAWEI_PRODUCT_E1434 0x1434 -#define HUAWEI_PRODUCT_E1435 0x1435 -#define HUAWEI_PRODUCT_E1436 0x1436 -#define HUAWEI_PRODUCT_E1437 0x1437 -#define HUAWEI_PRODUCT_E1438 0x1438 -#define HUAWEI_PRODUCT_E1439 0x1439 -#define HUAWEI_PRODUCT_E143A 0x143A -#define HUAWEI_PRODUCT_E143B 0x143B -#define HUAWEI_PRODUCT_E143C 0x143C -#define HUAWEI_PRODUCT_E143D 0x143D -#define HUAWEI_PRODUCT_E143E 0x143E -#define HUAWEI_PRODUCT_E143F 0x143F #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 -#define HUAWEI_PRODUCT_E14AC 0x14AC -#define HUAWEI_PRODUCT_K3806 0x14AE #define HUAWEI_PRODUCT_K4605 0x14C6 -#define HUAWEI_PRODUCT_K5005 0x14C8 -#define HUAWEI_PRODUCT_K3770 0x14C9 -#define HUAWEI_PRODUCT_K3771 0x14CA -#define HUAWEI_PRODUCT_K4510 0x14CB -#define HUAWEI_PRODUCT_K4511 0x14CC -#define HUAWEI_PRODUCT_ETS1220 0x1803 -#define HUAWEI_PRODUCT_E353 0x1506 -#define HUAWEI_PRODUCT_E173S 0x1C05 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -615,104 +539,123 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1402, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1404, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1407, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1420, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1421, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1422, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1423, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1424, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1425, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1426, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1427, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1428, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1429, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1430, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1431, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1432, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1433, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1434, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1435, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1436, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1437, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1438, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1439, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x10) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x12) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x13) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x01) }, /* E398 3G Modem */ - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x02) }, /* E398 3G PC UI Interface */ - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x03) }, /* E398 3G Application Interface */ + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7C) }, + + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, -- cgit v1.2.3-70-g09d2 From 71a5e61b81191cfb5624add64f925990487d64c0 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 20 Jul 2012 09:33:45 +0200 Subject: usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module Since commit "5e0aa49 usb: chipidea: use generic map/unmap routines", the udc part of the chipidea driver needs the generic usb gadget helper functions. If the chipidea driver with udc support is built into the kernel and usb gadget is built a module, the linking of the kernel fails with: drivers/built-in.o: In function `_hardware_dequeue': drivers/usb/chipidea/udc.c:527: undefined reference to `usb_gadget_unmap_request' drivers/usb/chipidea/udc.c:1269: undefined reference to `usb_gadget_unmap_request' drivers/usb/chipidea/udc.c:1821: undefined reference to `usb_del_gadget_udc' drivers/usb/chipidea/udc.c:443: undefined reference to `usb_gadget_map_request' drivers/usb/chipidea/udc.c:1774: undefined reference to `usb_add_gadget_udc' This patch changes the dependencies, so that udc support can only be activated if the linux gadget support (USB_GADGET) is builtin or both chipidea driver and USB_GADGET are modular. Same dependencies for the chipidea host support and the linux host side USB support (USB). While there, fix the indention of chipidea the help text. Cc: Alexander Shishkin Reviewed-by: Felipe Balbi Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/Kconfig | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 8337fb5d988..47e499c9c0b 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -1,9 +1,9 @@ config USB_CHIPIDEA tristate "ChipIdea Highspeed Dual Role Controller" - depends on USB + depends on USB || USB_GADGET help - Say Y here if your system has a dual role high speed USB - controller based on ChipIdea silicon IP. Currently, only the + Say Y here if your system has a dual role high speed USB + controller based on ChipIdea silicon IP. Currently, only the peripheral mode is supported. When compiled dynamically, the module will be called ci-hdrc.ko. @@ -12,7 +12,7 @@ if USB_CHIPIDEA config USB_CHIPIDEA_UDC bool "ChipIdea device controller" - depends on USB_GADGET + depends on USB_GADGET=y || USB_GADGET=USB_CHIPIDEA select USB_GADGET_DUALSPEED help Say Y here to enable device controller functionality of the @@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC config USB_CHIPIDEA_HOST bool "ChipIdea host controller" + depends on USB=y || USB=USB_CHIPIDEA select USB_EHCI_ROOT_HUB_TT help Say Y here to enable host controller functionality of the -- cgit v1.2.3-70-g09d2 From 872c495dd0f9d1f48814a8ee80c2c7b3b7c3b4d9 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Fri, 20 Jul 2012 15:13:35 +0530 Subject: OMAP: USB : Fix the EHCI enumeration and core retention issue This commit 354ab8567ae3107a8cbe7228c3181990ba598aac titled "Fix OMAP EHCI suspend/resume failure (i693)" is causing the usb hub and device detection fails in beagle XM causeing NFS not functional. This affects the core retention too. The same commit logic needs to be revisted adhering to hwmod and device tree framework. for now, this commit id 354ab8567ae3107a8cbe7228c3181990ba598aac titled "Fix OMAP EHCI suspend/resume failure (i693)" reverted. This patch is validated on BeagleXM with NFS support over usb ethernet and USB mass storage and other device detection. Signed-off-by: Keshava Munegowda Acked-by: Felipe Balbi Cc: stable # 3.5 Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-omap.c | 167 +------------------------------------------ 1 file changed, 1 insertion(+), 166 deletions(-) diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index bb55eb4a7d4..d7fe287d067 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -56,15 +56,6 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 -/* Errata i693 */ -static struct clk *utmi_p1_fck; -static struct clk *utmi_p2_fck; -static struct clk *xclk60mhsp1_ck; -static struct clk *xclk60mhsp2_ck; -static struct clk *usbhost_p1_fck; -static struct clk *usbhost_p2_fck; -static struct clk *init_60m_fclk; - /*-------------------------------------------------------------------------*/ static const struct hc_driver ehci_omap_hc_driver; @@ -80,40 +71,6 @@ static inline u32 ehci_read(void __iomem *base, u32 reg) return __raw_readl(base + reg); } -/* Erratum i693 workaround sequence */ -static void omap_ehci_erratum_i693(struct ehci_hcd *ehci) -{ - int ret = 0; - - /* Switch to the internal 60 MHz clock */ - ret = clk_set_parent(utmi_p1_fck, init_60m_fclk); - if (ret != 0) - ehci_err(ehci, "init_60m_fclk set parent" - "failed error:%d\n", ret); - - ret = clk_set_parent(utmi_p2_fck, init_60m_fclk); - if (ret != 0) - ehci_err(ehci, "init_60m_fclk set parent" - "failed error:%d\n", ret); - - clk_enable(usbhost_p1_fck); - clk_enable(usbhost_p2_fck); - - /* Wait 1ms and switch back to the external clock */ - mdelay(1); - ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck); - if (ret != 0) - ehci_err(ehci, "xclk60mhsp1_ck set parent" - "failed error:%d\n", ret); - - ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck); - if (ret != 0) - ehci_err(ehci, "xclk60mhsp2_ck set parent" - "failed error:%d\n", ret); - - clk_disable(usbhost_p1_fck); - clk_disable(usbhost_p2_fck); -} static void omap_ehci_soft_phy_reset(struct usb_hcd *hcd, u8 port) { @@ -195,50 +152,6 @@ static int omap_ehci_init(struct usb_hcd *hcd) return rc; } -static int omap_ehci_hub_control( - struct usb_hcd *hcd, - u16 typeReq, - u16 wValue, - u16 wIndex, - char *buf, - u16 wLength -) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - u32 __iomem *status_reg = &ehci->regs->port_status[ - (wIndex & 0xff) - 1]; - u32 temp; - unsigned long flags; - int retval = 0; - - spin_lock_irqsave(&ehci->lock, flags); - - if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { - temp = ehci_readl(ehci, status_reg); - if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { - retval = -EPIPE; - goto done; - } - - temp &= ~PORT_WKCONN_E; - temp |= PORT_WKDISC_E | PORT_WKOC_E; - ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); - - omap_ehci_erratum_i693(ehci); - - set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); - goto done; - } - - spin_unlock_irqrestore(&ehci->lock, flags); - - /* Handle the hub control events here */ - return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); -done: - spin_unlock_irqrestore(&ehci->lock, flags); - return retval; -} - static void disable_put_regulator( struct ehci_hcd_omap_platform_data *pdata) { @@ -351,79 +264,9 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) goto err_pm_runtime; } - /* get clocks */ - utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); - if (IS_ERR(utmi_p1_fck)) { - ret = PTR_ERR(utmi_p1_fck); - dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); - goto err_add_hcd; - } - - xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); - if (IS_ERR(xclk60mhsp1_ck)) { - ret = PTR_ERR(xclk60mhsp1_ck); - dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); - goto err_utmi_p1_fck; - } - - utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); - if (IS_ERR(utmi_p2_fck)) { - ret = PTR_ERR(utmi_p2_fck); - dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); - goto err_xclk60mhsp1_ck; - } - - xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); - if (IS_ERR(xclk60mhsp2_ck)) { - ret = PTR_ERR(xclk60mhsp2_ck); - dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); - goto err_utmi_p2_fck; - } - - usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); - if (IS_ERR(usbhost_p1_fck)) { - ret = PTR_ERR(usbhost_p1_fck); - dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); - goto err_xclk60mhsp2_ck; - } - - usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); - if (IS_ERR(usbhost_p2_fck)) { - ret = PTR_ERR(usbhost_p2_fck); - dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); - goto err_usbhost_p1_fck; - } - - init_60m_fclk = clk_get(dev, "init_60m_fclk"); - if (IS_ERR(init_60m_fclk)) { - ret = PTR_ERR(init_60m_fclk); - dev_err(dev, "init_60m_fclk failed error:%d\n", ret); - goto err_usbhost_p2_fck; - } return 0; -err_usbhost_p2_fck: - clk_put(usbhost_p2_fck); - -err_usbhost_p1_fck: - clk_put(usbhost_p1_fck); - -err_xclk60mhsp2_ck: - clk_put(xclk60mhsp2_ck); - -err_utmi_p2_fck: - clk_put(utmi_p2_fck); - -err_xclk60mhsp1_ck: - clk_put(xclk60mhsp1_ck); - -err_utmi_p1_fck: - clk_put(utmi_p1_fck); - -err_add_hcd: - usb_remove_hcd(hcd); - err_pm_runtime: disable_put_regulator(pdata); pm_runtime_put_sync(dev); @@ -454,14 +297,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) iounmap(hcd->regs); usb_put_hcd(hcd); - clk_put(utmi_p1_fck); - clk_put(utmi_p2_fck); - clk_put(xclk60mhsp1_ck); - clk_put(xclk60mhsp2_ck); - clk_put(usbhost_p1_fck); - clk_put(usbhost_p2_fck); - clk_put(init_60m_fclk); - pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -532,7 +367,7 @@ static const struct hc_driver ehci_omap_hc_driver = { * root hub support */ .hub_status_data = ehci_hub_status_data, - .hub_control = omap_ehci_hub_control, + .hub_control = ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, -- cgit v1.2.3-70-g09d2 From 4840ae17ba7e21f2932120383a2c9a0f30e66123 Mon Sep 17 00:00:00 2001 From: Bruno Morelli Date: Mon, 30 Jul 2012 15:26:50 +0200 Subject: USB: isp1362-hcd.c: usb message always saved in case of underrun The usb message must be saved also in case the USB endpoint is not a control endpoint (i.e., "endpoint 0"), otherwise in some circumstances we don't have a payload in case of error. The patch has been created by tracing with usbmon the different error messages generated by this driver with respect to the ehci-hcd driver. Signed-off-by: Bruno Morelli Signed-off-by: Claudio Scordino Tested-by: Bruno Morelli Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1362-hcd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 2ed112d3e15..256326322cf 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -543,12 +543,12 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep) usb_pipein(urb->pipe) ? "IN" : "OUT", ep->nextpid, short_ok ? "" : "not_", PTD_GET_COUNT(ptd), ep->maxpacket, len); + /* save the data underrun error code for later and + * proceed with the status stage + */ + urb->actual_length += PTD_GET_COUNT(ptd); if (usb_pipecontrol(urb->pipe)) { ep->nextpid = USB_PID_ACK; - /* save the data underrun error code for later and - * proceed with the status stage - */ - urb->actual_length += PTD_GET_COUNT(ptd); BUG_ON(urb->actual_length > urb->transfer_buffer_length); if (urb->status == -EINPROGRESS) -- cgit v1.2.3-70-g09d2 From f41a9b3b15e0f74656f69e6da403d870c53ea4e6 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 8 Aug 2012 16:25:03 +0200 Subject: ath9k: fix interrupt storms on queued hardware reset commit b74713d04effbacd3d126ce94cec18742187b6ce "ath9k: Handle fatal interrupts properly" introduced a race condition, where IRQs are being left enabled, however the irq handler returns IRQ_HANDLED while the reset is still queued without addressing the IRQ cause. This leads to an IRQ storm that prevents the system from even getting to the reset code. Fix this by disabling IRQs in the handler without touching intr_ref_cnt. Cc: Rajkumar Manoharan Cc: Sujith Manoharan Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.c | 18 ++++++++++++------ drivers/net/wireless/ath/ath9k/mac.h | 1 + drivers/net/wireless/ath/ath9k/main.c | 4 +++- 3 files changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 7990cd55599..b42be910a83 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -773,15 +773,10 @@ bool ath9k_hw_intrpend(struct ath_hw *ah) } EXPORT_SYMBOL(ath9k_hw_intrpend); -void ath9k_hw_disable_interrupts(struct ath_hw *ah) +void ath9k_hw_kill_interrupts(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); - if (!(ah->imask & ATH9K_INT_GLOBAL)) - atomic_set(&ah->intr_ref_cnt, -1); - else - atomic_dec(&ah->intr_ref_cnt); - ath_dbg(common, INTERRUPT, "disable IER\n"); REG_WRITE(ah, AR_IER, AR_IER_DISABLE); (void) REG_READ(ah, AR_IER); @@ -793,6 +788,17 @@ void ath9k_hw_disable_interrupts(struct ath_hw *ah) (void) REG_READ(ah, AR_INTR_SYNC_ENABLE); } } +EXPORT_SYMBOL(ath9k_hw_kill_interrupts); + +void ath9k_hw_disable_interrupts(struct ath_hw *ah) +{ + if (!(ah->imask & ATH9K_INT_GLOBAL)) + atomic_set(&ah->intr_ref_cnt, -1); + else + atomic_dec(&ah->intr_ref_cnt); + + ath9k_hw_kill_interrupts(ah); +} EXPORT_SYMBOL(ath9k_hw_disable_interrupts); void ath9k_hw_enable_interrupts(struct ath_hw *ah) diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h index 0eba36dca6f..4a745e68dd9 100644 --- a/drivers/net/wireless/ath/ath9k/mac.h +++ b/drivers/net/wireless/ath/ath9k/mac.h @@ -738,6 +738,7 @@ bool ath9k_hw_intrpend(struct ath_hw *ah); void ath9k_hw_set_interrupts(struct ath_hw *ah); void ath9k_hw_enable_interrupts(struct ath_hw *ah); void ath9k_hw_disable_interrupts(struct ath_hw *ah); +void ath9k_hw_kill_interrupts(struct ath_hw *ah); void ar9002_hw_attach_mac_ops(struct ath_hw *ah); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6049d8b8285..a22df749b8d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -462,8 +462,10 @@ irqreturn_t ath_isr(int irq, void *dev) if (!ath9k_hw_intrpend(ah)) return IRQ_NONE; - if(test_bit(SC_OP_HW_RESET, &sc->sc_flags)) + if (test_bit(SC_OP_HW_RESET, &sc->sc_flags)) { + ath9k_hw_kill_interrupts(ah); return IRQ_HANDLED; + } /* * Figure out the reason(s) for the interrupt. Note -- cgit v1.2.3-70-g09d2 From 60f53cf99060472973f16452116d9c467f8b08c6 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Wed, 8 Aug 2012 19:44:21 +0400 Subject: rndis_wlan: Fix potential memory leak in update_pmkid() Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/rndis_wlan.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 241162e8111..7a4ae9ee1c6 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -1803,6 +1803,7 @@ static struct ndis_80211_pmkid *update_pmkid(struct usbnet *usbdev, struct cfg80211_pmksa *pmksa, int max_pmkids) { + struct ndis_80211_pmkid *new_pmkids; int i, err, newlen; unsigned int count; @@ -1833,11 +1834,12 @@ static struct ndis_80211_pmkid *update_pmkid(struct usbnet *usbdev, /* add new pmkid */ newlen = sizeof(*pmkids) + (count + 1) * sizeof(pmkids->bssid_info[0]); - pmkids = krealloc(pmkids, newlen, GFP_KERNEL); - if (!pmkids) { + new_pmkids = krealloc(pmkids, newlen, GFP_KERNEL); + if (!new_pmkids) { err = -ENOMEM; goto error; } + pmkids = new_pmkids; pmkids->length = cpu_to_le32(newlen); pmkids->bssid_info_count = cpu_to_le32(count + 1); -- cgit v1.2.3-70-g09d2 From 5d774b74ef7d0428a3e45c9bb5b3a0915d2240cb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 9 Aug 2012 09:57:30 +0300 Subject: wireless: at76c50x: signedness bug in at76_dfu_get_state() This return holds the number of bytes transfered (1 byte) or a negative error code. The type should be int instead of u8. Signed-off-by: Dan Carpenter Acked-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/at76c50x-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index efc162e0b51..88b8d64c90f 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -342,7 +342,7 @@ static int at76_dfu_get_status(struct usb_device *udev, return ret; } -static u8 at76_dfu_get_state(struct usb_device *udev, u8 *state) +static int at76_dfu_get_state(struct usb_device *udev, u8 *state) { int ret; -- cgit v1.2.3-70-g09d2 From e19f15ac6437624b6214b2f0ec0d69fb7eb205fa Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 9 Aug 2012 12:37:26 +0530 Subject: ath9k: stop btcoex on device suspend During suspend, the device will be moved to FULLSLEEP state. As btcoex is never been stopped, the btcoex timer is running and tries to access hw on fullsleep state. Fix that. Cc: stable@vger.kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index d455de9162e..a978984d78a 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -321,6 +321,7 @@ static int ath_pci_suspend(struct device *device) * Otherwise the chip never moved to full sleep, * when no interface is up. */ + ath9k_stop_btcoex(sc); ath9k_hw_disable(sc->sc_ah); ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP); -- cgit v1.2.3-70-g09d2 From 5c263b92f828af6a8cf54041db45ceae5af8f2ab Mon Sep 17 00:00:00 2001 From: Mark Ferrell Date: Tue, 24 Jul 2012 14:15:13 -0500 Subject: usb: serial: mos7840: Fixup mos7840_chars_in_buffer() * Use the buffer content length as opposed to the total buffer size. This can be a real problem when using the mos7840 as a usb serial-console as all kernel output is truncated during boot. Signed-off-by: Mark Ferrell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 57eca244842..009c1d99e14 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1232,9 +1232,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty) return 0; spin_lock_irqsave(&mos7840_port->pool_lock, flags); - for (i = 0; i < NUM_URBS; ++i) - if (mos7840_port->busy[i]) - chars += URB_TRANSFER_BUFFER_SIZE; + for (i = 0; i < NUM_URBS; ++i) { + if (mos7840_port->busy[i]) { + struct urb *urb = mos7840_port->write_urb_pool[i]; + chars += urb->transfer_buffer_length; + } + } spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); dbg("%s - returns %d", __func__, chars); return chars; -- cgit v1.2.3-70-g09d2 From a1028f0abfb321e0f87c10ac0cce8508097c2b42 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Fri, 27 Jul 2012 01:11:41 +0200 Subject: usb: usb_wwan: replace release and disconnect with a port_remove hook MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Doing port specific cleanup in the .port_remove hook is a lot simpler and safer than doing it in the USB driver .release or .disconnect methods. The removal of the port from the usb-serial bus will happen before the USB driver cleanup, so we must be careful about accessing port specific driver data from any USB driver functions. This problem surfaced after the commit 0998d0631 device-core: Ensure drvdata = NULL when no driver is bound which turned the previous unsafe access into a reliable NULL pointer dereference. Fixes the following Oops: [ 243.148471] BUG: unable to handle kernel NULL pointer dereference at (null) [ 243.148508] IP: [] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.148556] PGD 79d60067 PUD 79d61067 PMD 0 [ 243.148590] Oops: 0000 [#1] SMP [ 243.148617] Modules linked in: sr_mod cdrom qmi_wwan usbnet option cdc_wdm usb_wwan usbserial usb_storage uas fuse af_packet ip6table_filter ip6_tables iptable_filter ip_tables x_tables tun edd cpufreq_conservative cpufreq_userspace cpufreq_powersave snd_pcm_oss snd_mixer_oss acpi_cpufreq snd_seq mperf snd_seq_device coretemp arc4 sg hp_wmi sparse_keymap uvcvideo videobuf2_core videodev videobuf2_vmalloc videobuf2_memops rtl8192ce rtl8192c_common rtlwifi joydev pcspkr microcode mac80211 i2c_i801 lpc_ich r8169 snd_hda_codec_idt cfg80211 snd_hda_intel snd_hda_codec rfkill snd_hwdep snd_pcm wmi snd_timer ac snd soundcore snd_page_alloc battery uhci_hcd i915 drm_kms_helper drm i2c_algo_bit ehci_hcd thermal usbcore video usb_common button processor thermal_sys [ 243.149007] CPU 1 [ 243.149027] Pid: 135, comm: khubd Not tainted 3.5.0-rc7-next-20120720-1-vanilla #1 Hewlett-Packard HP Mini 110-3700 /1584 [ 243.149072] RIP: 0010:[] [] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.149118] RSP: 0018:ffff880037e75b30 EFLAGS: 00010286 [ 243.149133] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88005912aa28 [ 243.149150] RDX: ffff88005e95f028 RSI: 0000000000000000 RDI: ffff88005f7c1a10 [ 243.149166] RBP: ffff880037e75b60 R08: 0000000000000000 R09: ffffffff812cea90 [ 243.149182] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88006539b440 [ 243.149198] R13: ffff88006539b440 R14: 0000000000000000 R15: 0000000000000000 [ 243.149216] FS: 0000000000000000(0000) GS:ffff88007ee80000(0000) knlGS:0000000000000000 [ 243.149233] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 243.149248] CR2: 0000000000000000 CR3: 0000000079fe0000 CR4: 00000000000007e0 [ 243.149264] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 243.149280] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 243.149298] Process khubd (pid: 135, threadinfo ffff880037e74000, task ffff880037d40600) [ 243.149313] Stack: [ 243.149323] ffff880037e75b40 ffff88006539b440 ffff8800799bc830 ffff88005f7c1800 [ 243.149348] 0000000000000001 ffff88006539b448 ffff880037e75b70 ffffffffa04685e9 [ 243.149371] ffff880037e75bc0 ffffffffa0473765 ffff880037354988 ffff88007b594800 [ 243.149395] Call Trace: [ 243.149419] [] usb_wwan_disconnect+0x9/0x10 [usb_wwan] [ 243.149447] [] usb_serial_disconnect+0xd5/0x120 [usbserial] [ 243.149511] [] usb_unbind_interface+0x58/0x1a0 [usbcore] [ 243.149545] [] __device_release_driver+0x77/0xe0 [ 243.149567] [] device_release_driver+0x27/0x40 [ 243.149587] [] bus_remove_device+0xdf/0x150 [ 243.149608] [] device_del+0x118/0x1a0 [ 243.149661] [] usb_disable_device+0xb0/0x280 [usbcore] [ 243.149718] [] usb_disconnect+0x9d/0x140 [usbcore] [ 243.149770] [] hub_port_connect_change+0xad/0x8a0 [usbcore] [ 243.149825] [] ? usb_control_msg+0xe5/0x110 [usbcore] [ 243.149878] [] hub_events+0x473/0x760 [usbcore] [ 243.149931] [] hub_thread+0x35/0x1d0 [usbcore] [ 243.149955] [] ? add_wait_queue+0x60/0x60 [ 243.150004] [] ? hub_events+0x760/0x760 [usbcore] [ 243.150026] [] kthread+0x8e/0xa0 [ 243.150047] [] kernel_thread_helper+0x4/0x10 [ 243.150068] [] ? flush_kthread_work+0x120/0x120 [ 243.150088] [] ? gs_change+0xb/0xb [ 243.150101] Code: fd 41 54 53 48 83 ec 08 80 7f 1a 00 74 57 49 89 fc 31 db 90 49 8b 7c 24 20 45 31 f6 48 81 c7 10 02 00 00 e8 bc 64 f3 e0 49 89 c7 <4b> 8b 3c 37 49 83 c6 08 e8 4c a5 bd ff 49 83 fe 20 75 ed 45 30 [ 243.150257] RIP [] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.150282] RSP [ 243.150294] CR2: 0000000000000000 [ 243.177170] ---[ end trace fba433d9015ffb8c ]--- Reported-by: Dan Carpenter Reported-by: Thomas Schäfer Suggested-by: Alan Stern Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ipw.c | 3 +- drivers/usb/serial/option.c | 4 +-- drivers/usb/serial/qcserial.c | 5 ++-- drivers/usb/serial/usb-wwan.h | 3 +- drivers/usb/serial/usb_wwan.c | 64 ++++++++++++++++++------------------------- 5 files changed, 31 insertions(+), 48 deletions(-) diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 5811d34b6c6..2cb30c53583 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -227,7 +227,6 @@ static void ipw_release(struct usb_serial *serial) { struct usb_wwan_intf_private *data = usb_get_serial_data(serial); - usb_wwan_release(serial); usb_set_serial_data(serial, NULL); kfree(data); } @@ -309,12 +308,12 @@ static struct usb_serial_driver ipw_device = { .description = "IPWireless converter", .id_table = id_table, .num_ports = 1, - .disconnect = usb_wwan_disconnect, .open = ipw_open, .close = ipw_close, .probe = ipw_probe, .attach = usb_wwan_startup, .release = ipw_release, + .port_remove = usb_wwan_port_remove, .dtr_rts = ipw_dtr_rts, .write = usb_wwan_write, }; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b09388606dc..99306281dcb 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1240,8 +1240,8 @@ static struct usb_serial_driver option_1port_device = { .tiocmset = usb_wwan_tiocmset, .ioctl = usb_wwan_ioctl, .attach = usb_wwan_startup, - .disconnect = usb_wwan_disconnect, .release = option_release, + .port_remove = usb_wwan_port_remove, .read_int_callback = option_instat_callback, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, @@ -1357,8 +1357,6 @@ static void option_release(struct usb_serial *serial) struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); struct option_private *priv = intfdata->private; - usb_wwan_release(serial); - kfree(priv); kfree(intfdata); } diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 8d103019d6a..314ae8ceba4 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -262,8 +262,7 @@ static void qc_release(struct usb_serial *serial) { struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); - /* Call usb_wwan release & free the private data allocated in qcprobe */ - usb_wwan_release(serial); + /* Free the private data allocated in qcprobe */ usb_set_serial_data(serial, NULL); kfree(priv); } @@ -283,8 +282,8 @@ static struct usb_serial_driver qcdevice = { .write_room = usb_wwan_write_room, .chars_in_buffer = usb_wwan_chars_in_buffer, .attach = usb_wwan_startup, - .disconnect = usb_wwan_disconnect, .release = qc_release, + .port_remove = usb_wwan_port_remove, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, .resume = usb_wwan_resume, diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index c47b6ec0306..1f034d2397c 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -9,8 +9,7 @@ extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on); extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port); extern void usb_wwan_close(struct usb_serial_port *port); extern int usb_wwan_startup(struct usb_serial *serial); -extern void usb_wwan_disconnect(struct usb_serial *serial); -extern void usb_wwan_release(struct usb_serial *serial); +extern int usb_wwan_port_remove(struct usb_serial_port *port); extern int usb_wwan_write_room(struct tty_struct *tty); extern void usb_wwan_set_termios(struct tty_struct *tty, struct usb_serial_port *port, diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index f35971dff4a..7d0811335b9 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -565,62 +565,50 @@ bail_out_error: } EXPORT_SYMBOL(usb_wwan_startup); -static void stop_read_write_urbs(struct usb_serial *serial) +int usb_wwan_port_remove(struct usb_serial_port *port) { - int i, j; - struct usb_serial_port *port; + int i; struct usb_wwan_port_private *portdata; - /* Stop reading/writing urbs */ - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - portdata = usb_get_serial_port_data(port); - for (j = 0; j < N_IN_URB; j++) - usb_kill_urb(portdata->in_urbs[j]); - for (j = 0; j < N_OUT_URB; j++) - usb_kill_urb(portdata->out_urbs[j]); + portdata = usb_get_serial_port_data(port); + usb_set_serial_port_data(port, NULL); + + /* Stop reading/writing urbs and free them */ + for (i = 0; i < N_IN_URB; i++) { + usb_kill_urb(portdata->in_urbs[i]); + usb_free_urb(portdata->in_urbs[i]); + free_page((unsigned long)portdata->in_buffer[i]); + } + for (i = 0; i < N_OUT_URB; i++) { + usb_kill_urb(portdata->out_urbs[i]); + usb_free_urb(portdata->out_urbs[i]); + kfree(portdata->out_buffer[i]); } -} -void usb_wwan_disconnect(struct usb_serial *serial) -{ - stop_read_write_urbs(serial); + /* Now free port private data */ + kfree(portdata); + return 0; } -EXPORT_SYMBOL(usb_wwan_disconnect); +EXPORT_SYMBOL(usb_wwan_port_remove); -void usb_wwan_release(struct usb_serial *serial) +#ifdef CONFIG_PM +static void stop_read_write_urbs(struct usb_serial *serial) { int i, j; struct usb_serial_port *port; struct usb_wwan_port_private *portdata; - /* Now free them */ + /* Stop reading/writing urbs */ for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); - - for (j = 0; j < N_IN_URB; j++) { - usb_free_urb(portdata->in_urbs[j]); - free_page((unsigned long) - portdata->in_buffer[j]); - portdata->in_urbs[j] = NULL; - } - for (j = 0; j < N_OUT_URB; j++) { - usb_free_urb(portdata->out_urbs[j]); - kfree(portdata->out_buffer[j]); - portdata->out_urbs[j] = NULL; - } - } - - /* Now free per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - kfree(usb_get_serial_port_data(port)); + for (j = 0; j < N_IN_URB; j++) + usb_kill_urb(portdata->in_urbs[j]); + for (j = 0; j < N_OUT_URB; j++) + usb_kill_urb(portdata->out_urbs[j]); } } -EXPORT_SYMBOL(usb_wwan_release); -#ifdef CONFIG_PM int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) { struct usb_wwan_intf_private *intfdata = serial->private; -- cgit v1.2.3-70-g09d2 From d5fd650cfc7ffeca4af0da939293c8e7a5aa7c36 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Fri, 27 Jul 2012 01:11:42 +0200 Subject: usb: serial: prevent suspend/resume from racing against probe/remove MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some usb-serial drivers may access port data in their suspend/ resume functions. Such drivers must always verify the validity of the data as both suspend and resume can be called both before usb_serial_device_probe and after usb_serial_device_remove. But the port data may be invalidated during port_probe and port_remove. This patch prevents the race against suspend and resume by disabling suspend while port_probe or port_remove is running. Suggested-by: Alan Stern Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/bus.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index f398d1e3447..c15f2e7cefc 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -61,18 +61,23 @@ static int usb_serial_device_probe(struct device *dev) goto exit; } + /* make sure suspend/resume doesn't race against port_probe */ + retval = usb_autopm_get_interface(port->serial->interface); + if (retval) + goto exit; + driver = port->serial->type; if (driver->port_probe) { retval = driver->port_probe(port); if (retval) - goto exit; + goto exit_with_autopm; } retval = device_create_file(dev, &dev_attr_port_number); if (retval) { if (driver->port_remove) retval = driver->port_remove(port); - goto exit; + goto exit_with_autopm; } minor = port->number; @@ -81,6 +86,8 @@ static int usb_serial_device_probe(struct device *dev) "%s converter now attached to ttyUSB%d\n", driver->description, minor); +exit_with_autopm: + usb_autopm_put_interface(port->serial->interface); exit: return retval; } @@ -96,6 +103,9 @@ static int usb_serial_device_remove(struct device *dev) if (!port) return -ENODEV; + /* make sure suspend/resume doesn't race against port_remove */ + usb_autopm_get_interface(port->serial->interface); + device_remove_file(&port->dev, &dev_attr_port_number); driver = port->serial->type; @@ -107,6 +117,7 @@ static int usb_serial_device_remove(struct device *dev) dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", driver->description, minor); + usb_autopm_put_interface(port->serial->interface); return retval; } -- cgit v1.2.3-70-g09d2 From 032129cb03df196c4216a82295e6555539da4ce7 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Fri, 27 Jul 2012 01:11:43 +0200 Subject: usb: usb_wwan: resume/suspend can be called after port is gone MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We cannot unconditionally access any usb-serial port specific data from the interface driver. Both supending and resuming may happen after the port has been removed and portdata is freed. Treat ports with no portdata as closed ports to avoid a NULL pointer dereference on resume. No need to kill URBs for removed ports on suspend, avoiding the same NULL pointer reference there. Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 7d0811335b9..6855d5ed033 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -602,6 +602,8 @@ static void stop_read_write_urbs(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); + if (!portdata) + continue; for (j = 0; j < N_IN_URB; j++) usb_kill_urb(portdata->in_urbs[j]); for (j = 0; j < N_OUT_URB; j++) @@ -700,7 +702,7 @@ int usb_wwan_resume(struct usb_serial *serial) /* skip closed ports */ spin_lock_irq(&intfdata->susp_lock); - if (!portdata->opened) { + if (!portdata || !portdata->opened) { spin_unlock_irq(&intfdata->susp_lock); continue; } -- cgit v1.2.3-70-g09d2 From 61eee9a72e40551b8ee7c4d06f4e7a3f3549d296 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 1 Aug 2012 14:32:55 +0200 Subject: update MAINTAINERS for Oliver Neukum my neukum.name address has run out Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 94b823f71e9..e7e8eda91d9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2212,7 +2212,7 @@ S: Maintained F: drivers/scsi/tmscsim.* DC395x SCSI driver -M: Oliver Neukum +M: Oliver Neukum M: Ali Akcaagac M: Jamie Lenehan W: http://twibble.org/dist/dc395x/ @@ -4533,7 +4533,7 @@ S: Supported F: arch/microblaze/ MICROTEK X6 SCANNER -M: Oliver Neukum +M: Oliver Neukum S: Maintained F: drivers/usb/image/microtek.* @@ -7071,7 +7071,7 @@ F: include/linux/mtd/ubi.h F: include/mtd/ubi-user.h USB ACM DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: Documentation/usb/acm.txt @@ -7092,7 +7092,7 @@ S: Supported F: drivers/block/ub.c USB CDC ETHERNET DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: drivers/net/usb/cdc_*.c @@ -7165,7 +7165,7 @@ F: drivers/usb/host/isp116x* F: include/linux/usb/isp116x.h USB KAWASAKI LSI DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/serial/kl5kusb105.* -- cgit v1.2.3-70-g09d2 From e7ae64c7545f48ae8672ae5026710794bc069979 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 5 Aug 2012 22:44:07 -0700 Subject: usb: renesas_usbhs: mod_host: add missing .bus_suspend/resume suspend/resume will failed on renesas_usbhs without this patch. Signed-off-by: Kuninori Morimoto Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/mod_host.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 1834cf50888..9b69a132329 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1266,6 +1266,12 @@ static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, return ret; } +static int usbhsh_bus_nop(struct usb_hcd *hcd) +{ + /* nothing to do */ + return 0; +} + static struct hc_driver usbhsh_driver = { .description = usbhsh_hcd_name, .hcd_priv_size = sizeof(struct usbhsh_hpriv), @@ -1290,6 +1296,8 @@ static struct hc_driver usbhsh_driver = { */ .hub_status_data = usbhsh_hub_status_data, .hub_control = usbhsh_hub_control, + .bus_suspend = usbhsh_bus_nop, + .bus_resume = usbhsh_bus_nop, }; /* -- cgit v1.2.3-70-g09d2 From 5b50d3b52601651ef3183cfb33d03cf486180e48 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 5 Aug 2012 22:44:43 -0700 Subject: usb: renesas_usbhs: fixup resume method for autonomy mode If renesas_usbhs is probed as autonomy mode, phy reset should be called after power resumed, and manual cold-plug should be called with slight delay. Signed-off-by: Kuninori Morimoto Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 8c9bb1ad306..681da06170c 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -603,12 +603,12 @@ static int usbhsc_resume(struct device *dev) struct usbhs_priv *priv = dev_get_drvdata(dev); struct platform_device *pdev = usbhs_priv_to_pdev(priv); - usbhs_platform_call(priv, phy_reset, pdev); - if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) usbhsc_power_ctrl(priv, 1); - usbhsc_hotplug(priv); + usbhs_platform_call(priv, phy_reset, pdev); + + usbhsc_drvcllbck_notify_hotplug(pdev); return 0; } -- cgit v1.2.3-70-g09d2 From cc59c7a9633a2d68d8bf908e4e45571d10e08117 Mon Sep 17 00:00:00 2001 From: "Steven J. Hill" Date: Mon, 6 Aug 2012 17:29:31 -0500 Subject: usb: host: mips: sead3: Update for EHCI register structure. One line fix after 'struct ehci_regs' definition was changed in commit a46af4ebf9ffec35eea0390e89935197b833dc61 (USB: EHCI: define extension registers like normal ones). Signed-off-by: Steven J. Hill Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sead3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c index 58c96bd50d2..0c9e43cfaff 100644 --- a/drivers/usb/host/ehci-sead3.c +++ b/drivers/usb/host/ehci-sead3.c @@ -40,7 +40,7 @@ static int ehci_sead3_setup(struct usb_hcd *hcd) ehci->need_io_watchdog = 0; /* Set burst length to 16 words. */ - ehci_writel(ehci, 0x1010, &ehci->regs->reserved[1]); + ehci_writel(ehci, 0x1010, &ehci->regs->reserved1[1]); return ret; } -- cgit v1.2.3-70-g09d2 From ecc8a0cdca18df5c9a7e84ab29160259123f3ae5 Mon Sep 17 00:00:00 2001 From: Venu Byravarasu Date: Fri, 10 Aug 2012 11:42:43 +0530 Subject: usb: host: tegra: fix warning messages in ehci_remove Existing implementation of tegra_ehci_remove() calls usb_put_hcd(hcd) first and then iounmap(hcd->regs). usb_put_hcd() implementation calls hcd_release() which frees up memory allocated for hcd. As iounmap is trying to unmap hcd->regs, after hcd getting freed up, warning messages were observed during unload of USB. Hence fixing it. Signed-off-by: Venu Byravarasu Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 950e95efa38..26dedb30ad0 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -799,11 +799,12 @@ static int tegra_ehci_remove(struct platform_device *pdev) #endif usb_remove_hcd(hcd); - usb_put_hcd(hcd); tegra_usb_phy_close(tegra->phy); iounmap(hcd->regs); + usb_put_hcd(hcd); + clk_disable_unprepare(tegra->clk); clk_put(tegra->clk); -- cgit v1.2.3-70-g09d2 From b1b552a69b8805e7e338074a9e8b670b4a795218 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 8 Aug 2012 11:48:10 +0200 Subject: usb: gadget: u_ether: fix kworker 100% CPU issue with still used interfaces in eth_stop This patch fixes an issue introduced by patch: 72c973d usb: gadget: add usb_endpoint_descriptor to struct usb_ep Without this patch we see a kworker taking 100% CPU, after this sequence: - Connect gadget to a windows host - load g_ether - ifconfig up ; ifconfig down; ifconfig up - ping The "ifconfig down" results in calling eth_stop(), which will call usb_ep_disable() and, if the carrier is still ok, usb_ep_enable(): usb_ep_disable(link->in_ep); usb_ep_disable(link->out_ep); if (netif_carrier_ok(net)) { usb_ep_enable(link->in_ep); usb_ep_enable(link->out_ep); } The ep should stay enabled, but will not, as ep_disable set the desc pointer to NULL, therefore the subsequent ep_enable will fail. This leads to permanent rescheduling of the eth_work() worker as usb_ep_queue() (called by the worker) will fail due to the unconfigured endpoint. We fix this issue by saving the ep descriptors and re-assign them before usb_ep_enable(). Cc: Tatyana Brokhman Signed-off-by: Michael Grzeschik Signed-off-by: Marc Kleine-Budde Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/u_ether.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 90e82e288eb..0e523092615 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -669,6 +669,8 @@ static int eth_stop(struct net_device *net) spin_lock_irqsave(&dev->lock, flags); if (dev->port_usb) { struct gether *link = dev->port_usb; + const struct usb_endpoint_descriptor *in; + const struct usb_endpoint_descriptor *out; if (link->close) link->close(link); @@ -682,10 +684,14 @@ static int eth_stop(struct net_device *net) * their own pace; the network stack can handle old packets. * For the moment we leave this here, since it works. */ + in = link->in_ep->desc; + out = link->out_ep->desc; usb_ep_disable(link->in_ep); usb_ep_disable(link->out_ep); if (netif_carrier_ok(net)) { DBG(dev, "host still using in/out endpoints\n"); + link->in_ep->desc = in; + link->out_ep->desc = out; usb_ep_enable(link->in_ep); usb_ep_enable(link->out_ep); } -- cgit v1.2.3-70-g09d2 From df7fba66471c6bbbaebb55e1bb3658eb7ce00a9b Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Fri, 3 Aug 2012 08:26:45 +0000 Subject: IB/mlx4: Fix possible deadlock on sm_lock spinlock The sm_lock spinlock is taken in the process context by mlx4_ib_modify_device, and in the interrupt context by update_sm_ah, so we need to take that spinlock with irqsave, and release it with irqrestore. Lockdeps reports this as follows: [ INFO: inconsistent lock state ] 3.5.0+ #20 Not tainted inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&ibdev->sm_lock)->rlock){?.+...}, at: [] update_sm_ah+0xad/0x100 [mlx4_ib] {HARDIRQ-ON-W} state was registered at: [] mark_irqflags+0x120/0x190 [] __lock_acquire+0x307/0x4c0 [] lock_acquire+0xb1/0x150 [] _raw_spin_lock+0x41/0x50 [] mlx4_ib_modify_device+0x63/0x240 [mlx4_ib] [] ib_modify_device+0x1c/0x20 [ib_core] [] set_node_desc+0x83/0xc0 [ib_core] [] dev_attr_store+0x20/0x30 [] sysfs_write_file+0xe6/0x170 [] vfs_write+0xc8/0x190 [] sys_write+0x51/0x90 [] system_call_fastpath+0x16/0x1b ... *** DEADLOCK *** 1 lock held by swapper/0/0: stack backtrace: Pid: 0, comm: swapper/0 Not tainted 3.5.0+ #20 Call Trace: [] print_usage_bug+0x18a/0x190 [] ? print_irq_inversion_bug+0x210/0x210 [] mark_lock_irq+0xf2/0x280 [] mark_lock+0x150/0x240 [] mark_irqflags+0x16f/0x190 [] __lock_acquire+0x307/0x4c0 [] ? update_sm_ah+0xad/0x100 [mlx4_ib] [] lock_acquire+0xb1/0x150 [] ? update_sm_ah+0xad/0x100 [mlx4_ib] [] _raw_spin_lock+0x41/0x50 [] ? update_sm_ah+0xad/0x100 [mlx4_ib] [] ? ib_create_ah+0x1a/0x40 [ib_core] [] update_sm_ah+0xad/0x100 [mlx4_ib] [] ? is_module_address+0x23/0x30 [] handle_port_mgmt_change_event+0xeb/0x150 [mlx4_ib] [] mlx4_ib_event+0x117/0x160 [mlx4_ib] [] ? _raw_spin_lock_irqsave+0x61/0x70 [] mlx4_dispatch_event+0x6c/0x90 [mlx4_core] [] mlx4_eq_int+0x500/0x950 [mlx4_core] Reported by: Or Gerlitz Tested-by: Bart Van Assche Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/mad.c | 16 ++++++++++------ drivers/infiniband/hw/mlx4/main.c | 5 +++-- 2 files changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index c27141fef1a..9c2ae7efd00 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -125,6 +125,7 @@ static void update_sm_ah(struct mlx4_ib_dev *dev, u8 port_num, u16 lid, u8 sl) { struct ib_ah *new_ah; struct ib_ah_attr ah_attr; + unsigned long flags; if (!dev->send_agent[port_num - 1][0]) return; @@ -139,11 +140,11 @@ static void update_sm_ah(struct mlx4_ib_dev *dev, u8 port_num, u16 lid, u8 sl) if (IS_ERR(new_ah)) return; - spin_lock(&dev->sm_lock); + spin_lock_irqsave(&dev->sm_lock, flags); if (dev->sm_ah[port_num - 1]) ib_destroy_ah(dev->sm_ah[port_num - 1]); dev->sm_ah[port_num - 1] = new_ah; - spin_unlock(&dev->sm_lock); + spin_unlock_irqrestore(&dev->sm_lock, flags); } /* @@ -197,13 +198,15 @@ static void smp_snoop(struct ib_device *ibdev, u8 port_num, struct ib_mad *mad, static void node_desc_override(struct ib_device *dev, struct ib_mad *mad) { + unsigned long flags; + if ((mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_LID_ROUTED || mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) && mad->mad_hdr.method == IB_MGMT_METHOD_GET_RESP && mad->mad_hdr.attr_id == IB_SMP_ATTR_NODE_DESC) { - spin_lock(&to_mdev(dev)->sm_lock); + spin_lock_irqsave(&to_mdev(dev)->sm_lock, flags); memcpy(((struct ib_smp *) mad)->data, dev->node_desc, 64); - spin_unlock(&to_mdev(dev)->sm_lock); + spin_unlock_irqrestore(&to_mdev(dev)->sm_lock, flags); } } @@ -213,6 +216,7 @@ static void forward_trap(struct mlx4_ib_dev *dev, u8 port_num, struct ib_mad *ma struct ib_mad_send_buf *send_buf; struct ib_mad_agent *agent = dev->send_agent[port_num - 1][qpn]; int ret; + unsigned long flags; if (agent) { send_buf = ib_create_send_mad(agent, qpn, 0, 0, IB_MGMT_MAD_HDR, @@ -225,13 +229,13 @@ static void forward_trap(struct mlx4_ib_dev *dev, u8 port_num, struct ib_mad *ma * wrong following the IB spec strictly, but we know * it's OK for our devices). */ - spin_lock(&dev->sm_lock); + spin_lock_irqsave(&dev->sm_lock, flags); memcpy(send_buf->mad, mad, sizeof *mad); if ((send_buf->ah = dev->sm_ah[port_num - 1])) ret = ib_post_send_mad(send_buf, NULL); else ret = -EINVAL; - spin_unlock(&dev->sm_lock); + spin_unlock_irqrestore(&dev->sm_lock, flags); if (ret) ib_free_send_mad(send_buf); diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index fe2088cfa6e..cc05579ebce 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -423,6 +423,7 @@ static int mlx4_ib_modify_device(struct ib_device *ibdev, int mask, struct ib_device_modify *props) { struct mlx4_cmd_mailbox *mailbox; + unsigned long flags; if (mask & ~IB_DEVICE_MODIFY_NODE_DESC) return -EOPNOTSUPP; @@ -430,9 +431,9 @@ static int mlx4_ib_modify_device(struct ib_device *ibdev, int mask, if (!(mask & IB_DEVICE_MODIFY_NODE_DESC)) return 0; - spin_lock(&to_mdev(ibdev)->sm_lock); + spin_lock_irqsave(&to_mdev(ibdev)->sm_lock, flags); memcpy(ibdev->node_desc, props->node_desc, 64); - spin_unlock(&to_mdev(ibdev)->sm_lock); + spin_unlock_irqrestore(&to_mdev(ibdev)->sm_lock, flags); /* * If possible, pass node desc to FW, so it can generate -- cgit v1.2.3-70-g09d2 From b53cc0fadef59583a9056c973e639852bed47e73 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Tue, 31 Jul 2012 18:29:08 +0400 Subject: serial: Change Kconfig entry for CLPS711X-target This trivial patch adds a short description for SERIAL_CLPS711X Kconfig entry, removes excess dependence on the ARM-platform (this is done globally for the platform), allows the driver to be compiled by default and removes unnecessary description about GRUB and LILO, because these bootloaders do not supported this platform. Signed-off-by: Alexander Shiyan Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 070b442c1f8..4720b4ba096 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -160,10 +160,12 @@ config SERIAL_KS8695_CONSOLE config SERIAL_CLPS711X tristate "CLPS711X serial port support" - depends on ARM && ARCH_CLPS711X + depends on ARCH_CLPS711X select SERIAL_CORE + default y help - ::: To be written ::: + This enables the driver for the on-chip UARTs of the Cirrus + Logic EP711x/EP721x/EP731x processors. config SERIAL_CLPS711X_CONSOLE bool "Support for console on CLPS711X serial port" @@ -173,9 +175,7 @@ config SERIAL_CLPS711X_CONSOLE Even if you say Y here, the currently visible virtual console (/dev/tty0) will still be used as the system console by default, but you can alter that using a kernel command line option such as - "console=ttyCL1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) + "console=ttyCL1". config SERIAL_SAMSUNG tristate "Samsung SoC serial support" -- cgit v1.2.3-70-g09d2 From 7d9739cd6b03575bc88c6ce3c60853dbc50a6ae2 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Tue, 7 Aug 2012 13:12:47 +0800 Subject: serial: ifx6x60: fix paging fault on spi_register_driver [ 117.240866] BUG: unable to handle kernel paging request at 815b627c [ 117.240866] IP: [<813fe94b>] spi_register_driver+0xb/0x50 ... [ 117.240866] Call Trace: [ 117.240866] [<817de977>] ifx_spi_init+0xbe/0xf0 The root cause is, spi_register_driver() is trying to write into the passed *const* struct spi_driver. Signed-off-by: Fengguang Wu Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 144cd3987d4..3ad079ffd04 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1331,7 +1331,7 @@ static const struct spi_device_id ifx_id_table[] = { MODULE_DEVICE_TABLE(spi, ifx_id_table); /* spi operations */ -static const struct spi_driver ifx_spi_driver = { +static struct spi_driver ifx_spi_driver = { .driver = { .name = DRVNAME, .pm = &ifx_spi_pm, -- cgit v1.2.3-70-g09d2 From 484d90eec884d814b005c9736bcf3fd018acba65 Mon Sep 17 00:00:00 2001 From: Andrew Boie Date: Fri, 10 Aug 2012 11:49:06 -0700 Subject: x86, build: Globally set -fno-pic GCC built with nonstandard options can enable -fpic by default. We never want this for 32-bit kernels and it will break the build. [ hpa: Notably the Android toolchain apparently does this. ] Change-Id: Iaab7d66e598b1c65ac4a4f0229eca2cd3d0d2898 Signed-off-by: Andrew Boie Link: http://lkml.kernel.org/r/1344624546-29691-1-git-send-email-andrew.p.boie@intel.com Signed-off-by: H. Peter Anvin --- arch/x86/Makefile | 4 ++++ arch/x86/boot/Makefile | 2 +- arch/x86/realmode/rm/Makefile | 2 +- 3 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index b0c5276861e..682e9c210ba 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -27,6 +27,10 @@ ifeq ($(CONFIG_X86_32),y) KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return + # Never want PIC in a 32-bit kernel, prevent breakage with GCC built + # with nonstandard options + KBUILD_CFLAGS += -fno-pic + # prevent gcc from keeping the stack 16 byte aligned KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 5a747dd884d..f7535bedc33 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -57,7 +57,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index b2d534cab25..88692871823 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -72,7 +72,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -m32 -g -Os -D_SETUP -D__KERNEL__ -D_WAKEUP \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/../../boot/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ -- cgit v1.2.3-70-g09d2 From d549f55f2e132e3d1f1288ce4231f45f12988bbf Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 10 Aug 2012 16:52:13 -0700 Subject: RDMA/ocrdma: Don't call vlan_dev_real_dev() for non-VLAN netdevs If CONFIG_VLAN_8021Q is not set, then vlan_dev_real_dev() just goes BUG(), so we shouldn't call it unless we're actually dealing with a VLAN netdev. Reported-by: Fengguang Wu Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ocrdma/ocrdma_main.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c index 5a044526e4f..c4e0131f1b5 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c @@ -161,7 +161,7 @@ static void ocrdma_add_default_sgid(struct ocrdma_dev *dev) ocrdma_get_guid(dev, &sgid->raw[8]); } -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#if IS_ENABLED(CONFIG_VLAN_8021Q) static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev) { struct net_device *netdev, *tmp; @@ -202,14 +202,13 @@ static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev) return 0; } -#if IS_ENABLED(CONFIG_IPV6) || IS_ENABLED(CONFIG_VLAN_8021Q) +#if IS_ENABLED(CONFIG_IPV6) static int ocrdma_inet6addr_event(struct notifier_block *notifier, unsigned long event, void *ptr) { struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)ptr; - struct net_device *event_netdev = ifa->idev->dev; - struct net_device *netdev = NULL; + struct net_device *netdev = ifa->idev->dev; struct ib_event gid_event; struct ocrdma_dev *dev; bool found = false; @@ -217,11 +216,12 @@ static int ocrdma_inet6addr_event(struct notifier_block *notifier, bool is_vlan = false; u16 vid = 0; - netdev = vlan_dev_real_dev(event_netdev); - if (netdev != event_netdev) { - is_vlan = true; - vid = vlan_dev_vlan_id(event_netdev); + is_vlan = netdev->priv_flags & IFF_802_1Q_VLAN; + if (is_vlan) { + vid = vlan_dev_vlan_id(netdev); + netdev = vlan_dev_real_dev(netdev); } + rcu_read_lock(); list_for_each_entry_rcu(dev, &ocrdma_dev_list, entry) { if (dev->nic_info.netdev == netdev) { -- cgit v1.2.3-70-g09d2 From f7e416eb923d0f9ff1e5e9b5c0e8b75ddd7db865 Mon Sep 17 00:00:00 2001 From: Venkatraman Sathiyamoorthy Date: Fri, 3 Aug 2012 07:58:33 +0100 Subject: ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topology Get rid of this warning.. arch/arm/kernel/built-in.o(.text+0xac78): Section mismatch in reference from the function init_cpu_topology() to the function .init.text:parse_dt_topology() The function init_cpu_topology() references the function __init parse_dt_topology(). This is often because init_cpu_topology lacks a __init annotation or the annotation of parse_dt_topology is wrong. Signed-off-by: Venkatraman S Signed-off-by: Russell King --- arch/arm/kernel/topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 198b08456e9..26c12c6440f 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid) * init_cpu_topology is called at boot when only one cpu is running * which prevent simultaneous write access to cpu_topology array */ -void init_cpu_topology(void) +void __init init_cpu_topology(void) { unsigned int cpu; -- cgit v1.2.3-70-g09d2 From 3d9fb0038a9b02febb01efc79a4a5d97f1822a90 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 3 Aug 2012 17:24:14 +0100 Subject: ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled VFPv4 support depends on the VFPv3 context save/restore code, so only advertise support in the hwcaps if the kernel can actually handle it. Cc: # 3.1+ Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/vfp/vfpmodule.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index fb849d044bd..c834b32af27 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -719,8 +719,10 @@ static int __init vfp_init(void) if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) elf_hwcap |= HWCAP_NEON; #endif +#ifdef CONFIG_VFPv3 if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000) elf_hwcap |= HWCAP_VFPv4; +#endif } } return 0; -- cgit v1.2.3-70-g09d2 From f1898f6be9a2e3690fb62d8307849b86a89cc36c Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 6 Aug 2012 18:43:42 +0100 Subject: ARM: 7484/1: Don't enable GENERIC_LOCKBREAK with ticket spinlocks Now that ARM has implemented its spinlocks with tickets we don't need to use the generic lockbreak algorithm. Remove the Kconfig from ARM so that we use the arch_spin_is_contended() definition from the asm header. This also saves a word in each lock because we don't need the break_lock member anymore. Signed-off-by: Stephen Boyd Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe..e4191ccbdb7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -126,11 +126,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y -- cgit v1.2.3-70-g09d2 From 237ec6f2e51d2fc2ff37c7c5f1ccc9264d09c85b Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Tue, 7 Aug 2012 19:05:10 +0100 Subject: ARM: 7486/1: sched_clock: update epoch_cyc on resume Many clocks that are used to provide sched_clock will reset during suspend. If read_sched_clock returns 0 after suspend, sched_clock will appear to jump forward. This patch resets cd.epoch_cyc to the current value of read_sched_clock during resume, which causes sched_clock() just after suspend to return the same value as sched_clock() just before suspend. In addition, during the window where epoch_ns has been updated before suspend, but epoch_cyc has not been updated after suspend, it is unknown whether the clock has reset or not, and sched_clock() could return a bogus value. Add a suspended flag, and return the pre-suspend epoch_ns value during this period. The new behavior is triggered by calling setup_sched_clock_needs_suspend instead of setup_sched_clock. Signed-off-by: Colin Cross Reviewed-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/include/asm/sched_clock.h | 2 ++ arch/arm/kernel/sched_clock.c | 24 ++++++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f75726343..05b8e82ec9f 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,5 +10,7 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate); #endif diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 27d186abbc0..f4515393248 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -21,6 +21,8 @@ struct clock_data { u32 epoch_cyc_copy; u32 mult; u32 shift; + bool suspended; + bool needs_suspend; }; static void sched_clock_poll(unsigned long wrap_ticks); @@ -49,6 +51,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) u64 epoch_ns; u32 epoch_cyc; + if (cd.suspended) + return cd.epoch_ns; + /* * Load the epoch_cyc and epoch_ns atomically. We do this by * ensuring that we always write epoch_cyc, epoch_ns and @@ -98,6 +103,13 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } +void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate) +{ + setup_sched_clock(read, bits, rate); + cd.needs_suspend = true; +} + void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -169,11 +181,23 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); + if (cd.needs_suspend) + cd.suspended = true; return 0; } +static void sched_clock_resume(void) +{ + if (cd.needs_suspend) { + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; + } +} + static struct syscore_ops sched_clock_ops = { .suspend = sched_clock_suspend, + .resume = sched_clock_resume, }; static int __init sched_clock_syscore_init(void) -- cgit v1.2.3-70-g09d2 From 47f1204329237a0f8655f5a9f14a38ac81946ca1 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Aug 2012 17:51:18 +0100 Subject: ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't present Swap entries are encoding in ptes such that !pte_present(pte) and pte_file(pte). The remaining bits of the descriptor are used to identify the swapfile and offset within it to the swap entry. When writing such a pte for a user virtual address, set_pte_at unconditionally sets the nG bit, which (in the case of LPAE) will corrupt the swapfile offset and lead to a BUG: [ 140.494067] swap_free: Unused swap offset entry 000763b4 [ 140.509989] BUG: Bad page map in process rs:main Q:Reg pte:0ec76800 pmd:8f92e003 This patch fixes the problem by only setting the nG bit for user mappings that are actually present. Cc: Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/pgtable.h | 34 ++++++++++++++++++---------------- arch/arm/mm/flush.c | 2 -- 2 files changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f66626d71e7..d88f9f049e9 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) +#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) +#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) +#define pte_special(pte) (0) + +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) { @@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t pteval); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { - if (addr >= TASK_SIZE) - set_pte_ext(ptep, pteval, 0); - else { + unsigned long ext = 0; + + if (addr < TASK_SIZE && pte_present_user(pteval)) { __sync_icache_dcache(pteval); - set_pte_ext(ptep, pteval, PTE_EXT_NG); + ext |= PTE_EXT_NG; } -} -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) -#define pte_special(pte) (0) - -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) + set_pte_ext(ptep, pteval, ext); +} #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 77458548e03..40ca11ed6e5 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval) struct page *page; struct address_space *mapping; - if (!pte_present_user(pteval)) - return; if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) /* only flush non-aliasing VIPT caches for exec mappings */ return; -- cgit v1.2.3-70-g09d2 From f5f2025ef3e2cdb593707cbf87378761f17befbe Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Aug 2012 17:51:19 +0100 Subject: ARM: 7488/1: mm: use 5 bits for swapfile type encoding Page migration encodes the pfn in the offset field of a swp_entry_t. For LPAE, we support physical addresses of up to 36 bits (due to sparsemem limitations with the size of page flags), requiring 24 bits to represent a pfn. A further 3 bits are used to encode a swp_entry into a pte, leaving 5 bits for the type field. Furthermore, the core code defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not get used. This patch reduces the width of the type field to 5 bits, allowing us to create up to 31 swapfiles of 64GB each. Cc: Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/pgtable.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index d88f9f049e9..41dc31f834c 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -253,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset --------------------> <- type --> 0 0 0 + * <--------------- offset ----------------------> < type -> 0 0 0 * - * This gives us up to 63 swap files and 32GB per swap file. Note that + * This gives us up to 31 swap files and 64GB per swap file. Note that * the offset field is always non-zero. */ #define __SWP_TYPE_SHIFT 3 -#define __SWP_TYPE_BITS 6 +#define __SWP_TYPE_BITS 5 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) -- cgit v1.2.3-70-g09d2 From 730a8128cd8978467eb1cf546b11014acb57d433 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Aug 2012 19:13:36 +0100 Subject: ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems Commit 5a783cbc4836 ("ARM: 7478/1: errata: extend workaround for erratum #720789") added workarounds for erratum #720789 to the range TLB invalidation functions with the observation that the erratum only affects SMP platforms. However, when running an SMP_ON_UP kernel on a uniprocessor platform we must take care to preserve the ASID as the workaround is not required. This patch ensures that we don't set the ASID to 0 when flushing the TLB on such a system, preserving the original behaviour with the workaround disabled. Cc: Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/tlb-v7.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index c2021139cb5..ea94765acf9 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range) dsb mov r0, r0, lsr #PAGE_SHIFT @ align address mov r1, r1, lsr #PAGE_SHIFT -#ifdef CONFIG_ARM_ERRATA_720789 - mov r3, #0 -#else asid r3, r3 @ mask ASID +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(W(mov) r3, #0 ) + ALT_UP(W(nop) ) #endif orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT -- cgit v1.2.3-70-g09d2 From 8a3f0ede2b3f5477122060af1a816c6bbf09fcd2 Mon Sep 17 00:00:00 2001 From: Jayakrishnan Memana Date: Sun, 15 Jul 2012 10:54:03 -0300 Subject: [media] uvcvideo: Reset the bytesused field when recycling an erroneous buffer Buffers marked as erroneous are recycled immediately by the driver if the nodrop module parameter isn't set. The buffer payload size is reset to 0, but the buffer bytesused field isn't. This results in the buffer being immediately considered as complete, leading to an infinite loop in interrupt context. Fix the problem by resetting the bytesused field when recycling the buffer. Cc: Signed-off-by: Jayakrishnan Memana Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_queue.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 9288fbd5001..5577381b5bf 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -338,6 +338,7 @@ struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, if ((queue->flags & UVC_QUEUE_DROP_CORRUPTED) && buf->error) { buf->error = 0; buf->state = UVC_BUF_STATE_QUEUED; + buf->bytesused = 0; vb2_set_plane_payload(&buf->buf, 0, 0); return buf; } -- cgit v1.2.3-70-g09d2 From 467548aa9fe91c35fc908a844129a788aec6a2d0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 3 Aug 2012 11:16:29 -0300 Subject: [media] DocBook: Remove a spurious character Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/vidioc-g-tuner.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml index 72039512790..701138f1209 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml @@ -125,7 +125,7 @@ the structure refers to a radio tuner the V4L2_TUNER_CAP_NORM flags can't be used. If multiple frequency bands are supported, then capability is the union of all -capability> fields of each &v4l2-frequency-band;. +capability fields of each &v4l2-frequency-band;. -- cgit v1.2.3-70-g09d2 From 3273781068268c404ea239dde4f6c246686dfa00 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 3 Aug 2012 11:16:59 -0300 Subject: [media] si470x: v4l2-compliance fixes Just a few fixes for problems found after updating v4l2-compliance to check the frequency band enumeration. Note that the i2c driver doesn't fill in bus_info, but since I can't test that driver I've decided not to fix that. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/si470x/radio-si470x-common.c | 3 +++ drivers/media/radio/si470x/radio-si470x-i2c.c | 5 +++-- drivers/media/radio/si470x/radio-si470x-usb.c | 2 +- 3 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/media/radio/si470x/radio-si470x-common.c b/drivers/media/radio/si470x/radio-si470x-common.c index 9e38132afec..9bb65e170d9 100644 --- a/drivers/media/radio/si470x/radio-si470x-common.c +++ b/drivers/media/radio/si470x/radio-si470x-common.c @@ -151,6 +151,7 @@ static const struct v4l2_frequency_band bands[] = { .index = 0, .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO | + V4L2_TUNER_CAP_FREQ_BANDS | V4L2_TUNER_CAP_HWSEEK_BOUNDED | V4L2_TUNER_CAP_HWSEEK_WRAP, .rangelow = 87500 * 16, @@ -162,6 +163,7 @@ static const struct v4l2_frequency_band bands[] = { .index = 1, .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO | + V4L2_TUNER_CAP_FREQ_BANDS | V4L2_TUNER_CAP_HWSEEK_BOUNDED | V4L2_TUNER_CAP_HWSEEK_WRAP, .rangelow = 76000 * 16, @@ -173,6 +175,7 @@ static const struct v4l2_frequency_band bands[] = { .index = 2, .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO | + V4L2_TUNER_CAP_FREQ_BANDS | V4L2_TUNER_CAP_HWSEEK_BOUNDED | V4L2_TUNER_CAP_HWSEEK_WRAP, .rangelow = 76000 * 16, diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c index 643a6ff7c5d..f867f04cccc 100644 --- a/drivers/media/radio/si470x/radio-si470x-i2c.c +++ b/drivers/media/radio/si470x/radio-si470x-i2c.c @@ -225,8 +225,9 @@ int si470x_vidioc_querycap(struct file *file, void *priv, { strlcpy(capability->driver, DRIVER_NAME, sizeof(capability->driver)); strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card)); - capability->capabilities = V4L2_CAP_HW_FREQ_SEEK | - V4L2_CAP_TUNER | V4L2_CAP_RADIO; + capability->device_caps = V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_READWRITE | + V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE; + capability->capabilities = capability->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; } diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c index 146be4263ea..be076f7181e 100644 --- a/drivers/media/radio/si470x/radio-si470x-usb.c +++ b/drivers/media/radio/si470x/radio-si470x-usb.c @@ -531,7 +531,7 @@ int si470x_vidioc_querycap(struct file *file, void *priv, strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card)); usb_make_path(radio->usbdev, capability->bus_info, sizeof(capability->bus_info)); - capability->device_caps = V4L2_CAP_HW_FREQ_SEEK | + capability->device_caps = V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_READWRITE | V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE; capability->capabilities = capability->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; -- cgit v1.2.3-70-g09d2 From 00424c7ec5d39044df1ce79d48ff3022838aad44 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Aug 2012 03:32:33 -0300 Subject: [media] mem2mem_testdev: fix querycap regression Trival but important patch. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mem2mem_testdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c index 7efe9ad7acc..0b91a5cd38e 100644 --- a/drivers/media/video/mem2mem_testdev.c +++ b/drivers/media/video/mem2mem_testdev.c @@ -431,7 +431,7 @@ static int vidioc_querycap(struct file *file, void *priv, strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); strlcpy(cap->bus_info, MEM2MEM_NAME, sizeof(cap->bus_info)); - cap->capabilities = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; + cap->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; } -- cgit v1.2.3-70-g09d2 From aa4d9b53f0d71ff805bbd1e30fcba9d1827a7dd8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Aug 2012 15:52:46 -0300 Subject: [media] VIDIOC_ENUM_FREQ_BANDS fix When VIDIOC_ENUM_FREQ_BANDS is called for a driver that doesn't supply an enum_freq_bands op, then it will fall back to reporting a single freq band based on information from g_tuner or g_modulator. Due to a bug this is an infinite list since the index field wasn't tested. This patch fixes this and returns -EINVAL if index != 0. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index c3b7b5f59b3..54f4ac612e8 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -1853,6 +1853,8 @@ static int v4l_enum_freq_bands(const struct v4l2_ioctl_ops *ops, .type = type, }; + if (p->index) + return -EINVAL; err = ops->vidioc_g_tuner(file, fh, &t); if (err) return err; @@ -1870,6 +1872,8 @@ static int v4l_enum_freq_bands(const struct v4l2_ioctl_ops *ops, if (type != V4L2_TUNER_RADIO) return -EINVAL; + if (p->index) + return -EINVAL; err = ops->vidioc_g_modulator(file, fh, &m); if (err) return err; -- cgit v1.2.3-70-g09d2 From 5e78831756bc455f334782514f2e1b0f605a81d6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Aug 2012 16:18:41 -0300 Subject: [media] Add missing logging for rangelow/high of hwseek struct v4l2_hw_freq_seek has two new fields that weren't printed in the logging function. Added. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 54f4ac612e8..6bc47fc82fe 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -402,8 +402,10 @@ static void v4l_print_hw_freq_seek(const void *arg, bool write_only) { const struct v4l2_hw_freq_seek *p = arg; - pr_cont("tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u\n", - p->tuner, p->type, p->seek_upward, p->wrap_around, p->spacing); + pr_cont("tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u, " + "rangelow=%u, rangehigh=%u\n", + p->tuner, p->type, p->seek_upward, p->wrap_around, p->spacing, + p->rangelow, p->rangehigh); } static void v4l_print_requestbuffers(const void *arg, bool write_only) -- cgit v1.2.3-70-g09d2 From ac6eb458f5f9d45dd3bbfe8a91683c09860910c5 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 6 Aug 2012 00:15:20 -0300 Subject: [media] Add USB dependency for IguanaWorks USB IR Transceiver This patch fixes the error drivers/usb/core/hub.c:3753: undefined reference to `usb_speed_string' seen in various random configurations. Cc: Sean Young Cc: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 5180390be7a..8be57634ba6 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -261,6 +261,7 @@ config IR_WINBOND_CIR config IR_IGUANA tristate "IguanaWorks USB IR Transceiver" + depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB ---help--- -- cgit v1.2.3-70-g09d2 From 820ddfa6ca87fc12bf202907b77f635df2098e66 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 11 Aug 2012 06:34:52 -0300 Subject: [media] radio-shark*: Remove work-around for dangling pointer in usb intfdata Recent kernels properly clear the usb intfdata pointer when another driver fails to bind (in the radio-shark* case the usbhid driver would try to bind first. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-shark.c | 9 --------- drivers/media/radio/radio-shark2.c | 9 --------- 2 files changed, 18 deletions(-) diff --git a/drivers/media/radio/radio-shark.c b/drivers/media/radio/radio-shark.c index d0b6bb50763..e35b8d938a3 100644 --- a/drivers/media/radio/radio-shark.c +++ b/drivers/media/radio/radio-shark.c @@ -286,15 +286,6 @@ static int usb_shark_probe(struct usb_interface *intf, if (!shark->transfer_buffer) goto err_alloc_buffer; - /* - * Work around a bug in usbhid/hid-core.c, where it leaves a dangling - * pointer in intfdata causing v4l2-device.c to not set it. Which - * results in usb_shark_disconnect() referencing the dangling pointer - * - * REMOVE (as soon as the above bug is fixed, patch submitted) - */ - usb_set_intfdata(intf, NULL); - shark->v4l2_dev.release = usb_shark_release; v4l2_device_set_name(&shark->v4l2_dev, DRV_NAME, &shark_instance); retval = v4l2_device_register(&intf->dev, &shark->v4l2_dev); diff --git a/drivers/media/radio/radio-shark2.c b/drivers/media/radio/radio-shark2.c index b9575de3e7e..fc0289d5da4 100644 --- a/drivers/media/radio/radio-shark2.c +++ b/drivers/media/radio/radio-shark2.c @@ -258,15 +258,6 @@ static int usb_shark_probe(struct usb_interface *intf, if (!shark->transfer_buffer) goto err_alloc_buffer; - /* - * Work around a bug in usbhid/hid-core.c, where it leaves a dangling - * pointer in intfdata causing v4l2-device.c to not set it. Which - * results in usb_shark_disconnect() referencing the dangling pointer - * - * REMOVE (as soon as the above bug is fixed, patch submitted) - */ - usb_set_intfdata(intf, NULL); - shark->v4l2_dev.release = usb_shark_release; v4l2_device_set_name(&shark->v4l2_dev, DRV_NAME, &shark_instance); retval = v4l2_device_register(&intf->dev, &shark->v4l2_dev); -- cgit v1.2.3-70-g09d2 From cfc1b2a06f87f562da2ffb9f8d1ae4203d9bfbfa Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 11 Aug 2012 06:34:53 -0300 Subject: [media] radio-shark*: Call cancel_work_sync from disconnect rather then release This removes the need for shark_led_work to take the v4l2 lock. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-shark.c | 13 ++----------- drivers/media/radio/radio-shark2.c | 12 ++---------- 2 files changed, 4 insertions(+), 21 deletions(-) diff --git a/drivers/media/radio/radio-shark.c b/drivers/media/radio/radio-shark.c index e35b8d938a3..1d76afa9e1b 100644 --- a/drivers/media/radio/radio-shark.c +++ b/drivers/media/radio/radio-shark.c @@ -181,14 +181,6 @@ static void shark_led_work(struct work_struct *work) container_of(work, struct shark_device, led_work); int i, res, brightness, actual_len; - /* - * We use the v4l2_dev lock and registered bit to ensure the device - * does not get unplugged and unreffed while we're running. - */ - mutex_lock(&shark->tea.mutex); - if (!video_is_registered(&shark->tea.vd)) - goto leave; - for (i = 0; i < 3; i++) { if (!test_and_clear_bit(i, &shark->brightness_new)) continue; @@ -208,8 +200,6 @@ static void shark_led_work(struct work_struct *work) v4l2_err(&shark->v4l2_dev, "set LED %s error: %d\n", shark->led_names[i], res); } -leave: - mutex_unlock(&shark->tea.mutex); } static void shark_led_set_blue(struct led_classdev *led_cdev, @@ -259,6 +249,8 @@ static void usb_shark_disconnect(struct usb_interface *intf) for (i = 0; i < NO_LEDS; i++) led_classdev_unregister(&shark->leds[i]); + cancel_work_sync(&shark->led_work); + v4l2_device_put(&shark->v4l2_dev); } @@ -266,7 +258,6 @@ static void usb_shark_release(struct v4l2_device *v4l2_dev) { struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev); - cancel_work_sync(&shark->led_work); v4l2_device_unregister(&shark->v4l2_dev); kfree(shark->transfer_buffer); kfree(shark); diff --git a/drivers/media/radio/radio-shark2.c b/drivers/media/radio/radio-shark2.c index fc0289d5da4..217483ca1b1 100644 --- a/drivers/media/radio/radio-shark2.c +++ b/drivers/media/radio/radio-shark2.c @@ -166,13 +166,6 @@ static void shark_led_work(struct work_struct *work) struct shark_device *shark = container_of(work, struct shark_device, led_work); int i, res, brightness, actual_len; - /* - * We use the v4l2_dev lock and registered bit to ensure the device - * does not get unplugged and unreffed while we're running. - */ - mutex_lock(&shark->tea.mutex); - if (!video_is_registered(&shark->tea.vd)) - goto leave; for (i = 0; i < 2; i++) { if (!test_and_clear_bit(i, &shark->brightness_new)) @@ -191,8 +184,6 @@ static void shark_led_work(struct work_struct *work) v4l2_err(&shark->v4l2_dev, "set LED %s error: %d\n", shark->led_names[i], res); } -leave: - mutex_unlock(&shark->tea.mutex); } static void shark_led_set_blue(struct led_classdev *led_cdev, @@ -231,6 +222,8 @@ static void usb_shark_disconnect(struct usb_interface *intf) for (i = 0; i < NO_LEDS; i++) led_classdev_unregister(&shark->leds[i]); + cancel_work_sync(&shark->led_work); + v4l2_device_put(&shark->v4l2_dev); } @@ -238,7 +231,6 @@ static void usb_shark_release(struct v4l2_device *v4l2_dev) { struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev); - cancel_work_sync(&shark->led_work); v4l2_device_unregister(&shark->v4l2_dev); kfree(shark->transfer_buffer); kfree(shark); -- cgit v1.2.3-70-g09d2 From 3e3b92cac5371031e9d2f916189577025f508ab8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 11 Aug 2012 06:34:54 -0300 Subject: [media] radio-shark: Only compile led support when CONFIG_LED_CLASS is set Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-shark.c | 135 ++++++++++++++++++++++---------------- 1 file changed, 79 insertions(+), 56 deletions(-) diff --git a/drivers/media/radio/radio-shark.c b/drivers/media/radio/radio-shark.c index 1d76afa9e1b..72ded29728b 100644 --- a/drivers/media/radio/radio-shark.c +++ b/drivers/media/radio/radio-shark.c @@ -35,6 +35,11 @@ #include #include +#if defined(CONFIG_LEDS_CLASS) || \ + (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_RADIO_SHARK_MODULE)) +#define SHARK_USE_LEDS 1 +#endif + /* * Version Information */ @@ -56,44 +61,18 @@ MODULE_LICENSE("GPL"); enum { BLUE_LED, BLUE_PULSE_LED, RED_LED, NO_LEDS }; -static void shark_led_set_blue(struct led_classdev *led_cdev, - enum led_brightness value); -static void shark_led_set_blue_pulse(struct led_classdev *led_cdev, - enum led_brightness value); -static void shark_led_set_red(struct led_classdev *led_cdev, - enum led_brightness value); - -static const struct led_classdev shark_led_templates[NO_LEDS] = { - [BLUE_LED] = { - .name = "%s:blue:", - .brightness = LED_OFF, - .max_brightness = 127, - .brightness_set = shark_led_set_blue, - }, - [BLUE_PULSE_LED] = { - .name = "%s:blue-pulse:", - .brightness = LED_OFF, - .max_brightness = 255, - .brightness_set = shark_led_set_blue_pulse, - }, - [RED_LED] = { - .name = "%s:red:", - .brightness = LED_OFF, - .max_brightness = 1, - .brightness_set = shark_led_set_red, - }, -}; - struct shark_device { struct usb_device *usbdev; struct v4l2_device v4l2_dev; struct snd_tea575x tea; +#ifdef SHARK_USE_LEDS struct work_struct led_work; struct led_classdev leds[NO_LEDS]; char led_names[NO_LEDS][32]; atomic_t brightness[NO_LEDS]; unsigned long brightness_new; +#endif u8 *transfer_buffer; u32 last_val; @@ -175,6 +154,7 @@ static struct snd_tea575x_ops shark_tea_ops = { .read_val = shark_read_val, }; +#ifdef SHARK_USE_LEDS static void shark_led_work(struct work_struct *work) { struct shark_device *shark = @@ -235,21 +215,78 @@ static void shark_led_set_red(struct led_classdev *led_cdev, schedule_work(&shark->led_work); } +static const struct led_classdev shark_led_templates[NO_LEDS] = { + [BLUE_LED] = { + .name = "%s:blue:", + .brightness = LED_OFF, + .max_brightness = 127, + .brightness_set = shark_led_set_blue, + }, + [BLUE_PULSE_LED] = { + .name = "%s:blue-pulse:", + .brightness = LED_OFF, + .max_brightness = 255, + .brightness_set = shark_led_set_blue_pulse, + }, + [RED_LED] = { + .name = "%s:red:", + .brightness = LED_OFF, + .max_brightness = 1, + .brightness_set = shark_led_set_red, + }, +}; + +static int shark_register_leds(struct shark_device *shark, struct device *dev) +{ + int i, retval; + + INIT_WORK(&shark->led_work, shark_led_work); + for (i = 0; i < NO_LEDS; i++) { + shark->leds[i] = shark_led_templates[i]; + snprintf(shark->led_names[i], sizeof(shark->led_names[0]), + shark->leds[i].name, shark->v4l2_dev.name); + shark->leds[i].name = shark->led_names[i]; + retval = led_classdev_register(dev, &shark->leds[i]); + if (retval) { + v4l2_err(&shark->v4l2_dev, + "couldn't register led: %s\n", + shark->led_names[i]); + return retval; + } + } + return 0; +} + +static void shark_unregister_leds(struct shark_device *shark) +{ + int i; + + for (i = 0; i < NO_LEDS; i++) + led_classdev_unregister(&shark->leds[i]); + + cancel_work_sync(&shark->led_work); +} +#else +static int shark_register_leds(struct shark_device *shark, struct device *dev) +{ + v4l2_warn(&shark->v4l2_dev, + "CONFIG_LED_CLASS not enabled, LED support disabled\n"); + return 0; +} +static inline void shark_unregister_leds(struct shark_device *shark) { } +#endif + static void usb_shark_disconnect(struct usb_interface *intf) { struct v4l2_device *v4l2_dev = usb_get_intfdata(intf); struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev); - int i; mutex_lock(&shark->tea.mutex); v4l2_device_disconnect(&shark->v4l2_dev); snd_tea575x_exit(&shark->tea); mutex_unlock(&shark->tea.mutex); - for (i = 0; i < NO_LEDS; i++) - led_classdev_unregister(&shark->leds[i]); - - cancel_work_sync(&shark->led_work); + shark_unregister_leds(shark); v4l2_device_put(&shark->v4l2_dev); } @@ -267,7 +304,7 @@ static int usb_shark_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct shark_device *shark; - int i, retval = -ENOMEM; + int retval = -ENOMEM; shark = kzalloc(sizeof(struct shark_device), GFP_KERNEL); if (!shark) @@ -277,8 +314,13 @@ static int usb_shark_probe(struct usb_interface *intf, if (!shark->transfer_buffer) goto err_alloc_buffer; - shark->v4l2_dev.release = usb_shark_release; v4l2_device_set_name(&shark->v4l2_dev, DRV_NAME, &shark_instance); + + retval = shark_register_leds(shark, &intf->dev); + if (retval) + goto err_reg_leds; + + shark->v4l2_dev.release = usb_shark_release; retval = v4l2_device_register(&intf->dev, &shark->v4l2_dev); if (retval) { v4l2_err(&shark->v4l2_dev, "couldn't register v4l2_device\n"); @@ -302,32 +344,13 @@ static int usb_shark_probe(struct usb_interface *intf, goto err_init_tea; } - INIT_WORK(&shark->led_work, shark_led_work); - for (i = 0; i < NO_LEDS; i++) { - shark->leds[i] = shark_led_templates[i]; - snprintf(shark->led_names[i], sizeof(shark->led_names[0]), - shark->leds[i].name, shark->v4l2_dev.name); - shark->leds[i].name = shark->led_names[i]; - /* - * We don't fail the probe if we fail to register the leds, - * because once we've called snd_tea575x_init, the /dev/radio0 - * node may be opened from userspace holding a reference to us! - * - * Note we cannot register the leds first instead as - * shark_led_work depends on the v4l2 mutex and registered bit. - */ - retval = led_classdev_register(&intf->dev, &shark->leds[i]); - if (retval) - v4l2_err(&shark->v4l2_dev, - "couldn't register led: %s\n", - shark->led_names[i]); - } - return 0; err_init_tea: v4l2_device_unregister(&shark->v4l2_dev); err_reg_dev: + shark_unregister_leds(shark); +err_reg_leds: kfree(shark->transfer_buffer); err_alloc_buffer: kfree(shark); -- cgit v1.2.3-70-g09d2 From be0c44fb480fe43fe8794ec4bff0b0e7e0b50c72 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 11 Aug 2012 06:34:55 -0300 Subject: [media] radio-shark2: Only compile led support when CONFIG_LED_CLASS is set Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-shark2.c | 122 ++++++++++++++++++++++--------------- 1 file changed, 73 insertions(+), 49 deletions(-) diff --git a/drivers/media/radio/radio-shark2.c b/drivers/media/radio/radio-shark2.c index 217483ca1b1..7b4efdfaae2 100644 --- a/drivers/media/radio/radio-shark2.c +++ b/drivers/media/radio/radio-shark2.c @@ -35,6 +35,11 @@ #include #include "radio-tea5777.h" +#if defined(CONFIG_LEDS_CLASS) || \ + (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_RADIO_SHARK2_MODULE)) +#define SHARK_USE_LEDS 1 +#endif + MODULE_AUTHOR("Hans de Goede "); MODULE_DESCRIPTION("Griffin radioSHARK2, USB radio receiver driver"); MODULE_LICENSE("GPL"); @@ -43,7 +48,6 @@ static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); - #define SHARK_IN_EP 0x83 #define SHARK_OUT_EP 0x05 @@ -54,36 +58,18 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); enum { BLUE_LED, RED_LED, NO_LEDS }; -static void shark_led_set_blue(struct led_classdev *led_cdev, - enum led_brightness value); -static void shark_led_set_red(struct led_classdev *led_cdev, - enum led_brightness value); - -static const struct led_classdev shark_led_templates[NO_LEDS] = { - [BLUE_LED] = { - .name = "%s:blue:", - .brightness = LED_OFF, - .max_brightness = 127, - .brightness_set = shark_led_set_blue, - }, - [RED_LED] = { - .name = "%s:red:", - .brightness = LED_OFF, - .max_brightness = 1, - .brightness_set = shark_led_set_red, - }, -}; - struct shark_device { struct usb_device *usbdev; struct v4l2_device v4l2_dev; struct radio_tea5777 tea; +#ifdef SHARK_USE_LEDS struct work_struct led_work; struct led_classdev leds[NO_LEDS]; char led_names[NO_LEDS][32]; atomic_t brightness[NO_LEDS]; unsigned long brightness_new; +#endif u8 *transfer_buffer; }; @@ -161,6 +147,7 @@ static struct radio_tea5777_ops shark_tea_ops = { .read_reg = shark_read_reg, }; +#ifdef SHARK_USE_LEDS static void shark_led_work(struct work_struct *work) { struct shark_device *shark = @@ -208,21 +195,72 @@ static void shark_led_set_red(struct led_classdev *led_cdev, schedule_work(&shark->led_work); } +static const struct led_classdev shark_led_templates[NO_LEDS] = { + [BLUE_LED] = { + .name = "%s:blue:", + .brightness = LED_OFF, + .max_brightness = 127, + .brightness_set = shark_led_set_blue, + }, + [RED_LED] = { + .name = "%s:red:", + .brightness = LED_OFF, + .max_brightness = 1, + .brightness_set = shark_led_set_red, + }, +}; + +static int shark_register_leds(struct shark_device *shark, struct device *dev) +{ + int i, retval; + + INIT_WORK(&shark->led_work, shark_led_work); + for (i = 0; i < NO_LEDS; i++) { + shark->leds[i] = shark_led_templates[i]; + snprintf(shark->led_names[i], sizeof(shark->led_names[0]), + shark->leds[i].name, shark->v4l2_dev.name); + shark->leds[i].name = shark->led_names[i]; + retval = led_classdev_register(dev, &shark->leds[i]); + if (retval) { + v4l2_err(&shark->v4l2_dev, + "couldn't register led: %s\n", + shark->led_names[i]); + return retval; + } + } + return 0; +} + +static void shark_unregister_leds(struct shark_device *shark) +{ + int i; + + for (i = 0; i < NO_LEDS; i++) + led_classdev_unregister(&shark->leds[i]); + + cancel_work_sync(&shark->led_work); +} +#else +static int shark_register_leds(struct shark_device *shark, struct device *dev) +{ + v4l2_warn(&shark->v4l2_dev, + "CONFIG_LED_CLASS not enabled, LED support disabled\n"); + return 0; +} +static inline void shark_unregister_leds(struct shark_device *shark) { } +#endif + static void usb_shark_disconnect(struct usb_interface *intf) { struct v4l2_device *v4l2_dev = usb_get_intfdata(intf); struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev); - int i; mutex_lock(&shark->tea.mutex); v4l2_device_disconnect(&shark->v4l2_dev); radio_tea5777_exit(&shark->tea); mutex_unlock(&shark->tea.mutex); - for (i = 0; i < NO_LEDS; i++) - led_classdev_unregister(&shark->leds[i]); - - cancel_work_sync(&shark->led_work); + shark_unregister_leds(shark); v4l2_device_put(&shark->v4l2_dev); } @@ -240,7 +278,7 @@ static int usb_shark_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct shark_device *shark; - int i, retval = -ENOMEM; + int retval = -ENOMEM; shark = kzalloc(sizeof(struct shark_device), GFP_KERNEL); if (!shark) @@ -250,8 +288,13 @@ static int usb_shark_probe(struct usb_interface *intf, if (!shark->transfer_buffer) goto err_alloc_buffer; - shark->v4l2_dev.release = usb_shark_release; v4l2_device_set_name(&shark->v4l2_dev, DRV_NAME, &shark_instance); + + retval = shark_register_leds(shark, &intf->dev); + if (retval) + goto err_reg_leds; + + shark->v4l2_dev.release = usb_shark_release; retval = v4l2_device_register(&intf->dev, &shark->v4l2_dev); if (retval) { v4l2_err(&shark->v4l2_dev, "couldn't register v4l2_device\n"); @@ -275,32 +318,13 @@ static int usb_shark_probe(struct usb_interface *intf, goto err_init_tea; } - INIT_WORK(&shark->led_work, shark_led_work); - for (i = 0; i < NO_LEDS; i++) { - shark->leds[i] = shark_led_templates[i]; - snprintf(shark->led_names[i], sizeof(shark->led_names[0]), - shark->leds[i].name, shark->v4l2_dev.name); - shark->leds[i].name = shark->led_names[i]; - /* - * We don't fail the probe if we fail to register the leds, - * because once we've called radio_tea5777_init, the /dev/radio0 - * node may be opened from userspace holding a reference to us! - * - * Note we cannot register the leds first instead as - * shark_led_work depends on the v4l2 mutex and registered bit. - */ - retval = led_classdev_register(&intf->dev, &shark->leds[i]); - if (retval) - v4l2_err(&shark->v4l2_dev, - "couldn't register led: %s\n", - shark->led_names[i]); - } - return 0; err_init_tea: v4l2_device_unregister(&shark->v4l2_dev); err_reg_dev: + shark_unregister_leds(shark); +err_reg_leds: kfree(shark->transfer_buffer); err_alloc_buffer: kfree(shark); -- cgit v1.2.3-70-g09d2 From 088c820b732dbfd515fc66d459d5f5777f79b406 Mon Sep 17 00:00:00 2001 From: Wang Xingchao Date: Mon, 13 Aug 2012 14:11:10 +0800 Subject: ALSA: hda - fix Copyright debug message As spec said, 1 indicates no copyright is asserted. Signed-off-by: Wang Xingchao Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c index 7e46258fc70..6894ec66258 100644 --- a/sound/pci/hda/hda_proc.c +++ b/sound/pci/hda/hda_proc.c @@ -412,7 +412,7 @@ static void print_digital_conv(struct snd_info_buffer *buffer, if (digi1 & AC_DIG1_EMPHASIS) snd_iprintf(buffer, " Preemphasis"); if (digi1 & AC_DIG1_COPYRIGHT) - snd_iprintf(buffer, " Copyright"); + snd_iprintf(buffer, " Non-Copyright"); if (digi1 & AC_DIG1_NONAUDIO) snd_iprintf(buffer, " Non-Audio"); if (digi1 & AC_DIG1_PROFESSIONAL) -- cgit v1.2.3-70-g09d2 From 080fc66fb5b6feae19fbbe8c6cbd7b11a4dac636 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Aug 2012 11:44:13 +0100 Subject: ARM: Bring back ARMv3 IO and user access code This partially reverts 357c9c1f07d4546bc3fbc0fd1044d96b114d14ed (ARM: Remove support for ARMv3 ARM610 and ARM710 CPUs). Although we only support StrongARM on the RiscPC, we need to keep the ARMv3 user access code for this platform because the bus does not understand half-word load/stores. Reported-by: Arnd Bergmann Signed-off-by: Russell King --- arch/arm/lib/Makefile | 23 +- arch/arm/lib/io-readsw-armv3.S | 106 ++++++++ arch/arm/lib/io-writesw-armv3.S | 126 +++++++++ arch/arm/lib/uaccess.S | 564 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 816 insertions(+), 3 deletions(-) create mode 100644 arch/arm/lib/io-readsw-armv3.S create mode 100644 arch/arm/lib/io-writesw-armv3.S create mode 100644 arch/arm/lib/uaccess.S diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 2473fd1fd51..af72969820b 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -16,13 +16,30 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ call_with_stack.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o -mmu-y += copy_from_user.o copy_to_user.o + +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($(CONFIG_PREEMPT),y) + mmu-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + mmu-y += copy_from_user.o copy_to_user.o +else + mmu-y += uaccess.o +endif +endif # using lib_ here won't override already available weak symbols obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o -lib-$(CONFIG_MMU) += $(mmu-y) -lib-y += io-readsw-armv4.o io-writesw-armv4.o +lib-$(CONFIG_MMU) += $(mmu-y) + +ifeq ($(CONFIG_CPU_32v3),y) + lib-y += io-readsw-armv3.o io-writesw-armv3.o +else + lib-y += io-readsw-armv4.o io-writesw-armv4.o +endif + lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o lib-$(CONFIG_ARCH_SHARK) += io-shark.o diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S new file mode 100644 index 00000000000..88487c8c4f2 --- /dev/null +++ b/arch/arm/lib/io-readsw-armv3.S @@ -0,0 +1,106 @@ +/* + * linux/arch/arm/lib/io-readsw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +.Linsw_bad_alignment: + adr r0, .Linsw_bad_align_msg + mov r2, lr + b panic +.Linsw_bad_align_msg: + .asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Linsw_align: tst r1, #1 + bne .Linsw_bad_alignment + + ldr r3, [r0] + strb r3, [r1], #1 + mov r3, r3, lsr #8 + strb r3, [r1], #1 + + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_readsw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Linsw_align + +.Linsw_aligned: mov ip, #0xff + orr ip, ip, ip, lsl #8 + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_insw_8 + +.Linsw_8_lp: ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + ldr r5, [r0] + and r5, r5, ip + ldr r6, [r0] + orr r5, r5, r6, lsl #16 + + ldr r6, [r0] + and r6, r6, ip + ldr lr, [r0] + orr r6, r6, lr, lsl #16 + + stmia r1!, {r3 - r6} + + subs r2, r2, #8 + bpl .Linsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + stmia r1!, {r3, r4} + +.Lno_insw_4: tst r2, #2 + beq .Lno_insw_2 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + str r3, [r1], #4 + +.Lno_insw_2: tst r2, #1 + ldrne r3, [r0] + strneb r3, [r1], #1 + movne r3, r3, lsr #8 + strneb r3, [r1] + + ldmfd sp!, {r4, r5, r6, pc} + + diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S new file mode 100644 index 00000000000..49b800419e3 --- /dev/null +++ b/arch/arm/lib/io-writesw-armv3.S @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/lib/io-writesw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +.Loutsw_bad_alignment: + adr r0, .Loutsw_bad_align_msg + mov r2, lr + b panic +.Loutsw_bad_align_msg: + .asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Loutsw_align: tst r1, #1 + bne .Loutsw_bad_alignment + + add r1, r1, #2 + + ldr r3, [r1, #-4] + mov r3, r3, lsr #16 + orr r3, r3, r3, lsl #16 + str r3, [r0] + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_writesw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Loutsw_align + + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_outsw_8 + +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r5, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r5, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r6, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r6, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + subs r2, r2, #8 + bpl .Loutsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 + + ldmia r1!, {r3, r4} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_4: tst r2, #2 + beq .Lno_outsw_2 + + ldr r3, [r1], #4 + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_2: tst r2, #1 + + ldrne r3, [r1] + + movne ip, r3, lsl #16 + orrne ip, ip, ip, lsr #16 + strne ip, [r0] + + ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S new file mode 100644 index 00000000000..5c908b1cb8e --- /dev/null +++ b/arch/arm/lib/uaccess.S @@ -0,0 +1,564 @@ +/* + * linux/arch/arm/lib/uaccess.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Routines to block copy data to/from user memory + * These are highly optimised both for the 4k page size + * and for various alignments. + */ +#include +#include +#include +#include + + .text + +#define PAGE_SHIFT 12 + +/* Prototype: int __copy_to_user(void *to, const char *from, size_t n) + * Purpose : copy a block to user memory from kernel memory + * Params : to - user memory + * : from - kernel memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ + +.Lc2u_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + sub r2, r2, ip + b .Lc2u_dest_aligned + +ENTRY(__copy_to_user) + stmfd sp!, {r2, r4 - r7, lr} + cmp r2, #4 + blt .Lc2u_not_enough + ands ip, r0, #3 + bne .Lc2u_dest_not_aligned +.Lc2u_dest_aligned: + + ands ip, r1, #3 + bne .Lc2u_src_not_aligned +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lc2u_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_0nowords + ldr r3, [r1], #4 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lc2u_0rem8lp + +.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} + stmia r0!, {r3 - r6} @ Shouldnt fault + ldmia r1!, {r3 - r6} + subs ip, ip, #32 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_0cpy8lp + +.Lc2u_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} + stmgeia r0!, {r3 - r6} @ Shouldnt fault + tst ip, #8 + ldmneia r1!, {r3 - r4} + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + ldrne r3, [r1], #4 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_0fupi +.Lc2u_0nowords: teq ip, #0 + beq .Lc2u_finished +.Lc2u_nowords: cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_not_enough: + movs ip, r2 + bne .Lc2u_nowords +.Lc2u_finished: mov r0, #0 + ldmfd sp!, {r2, r4 - r7, pc} + +.Lc2u_src_not_aligned: + bic r1, r1, #3 + ldr r7, [r1], #4 + cmp ip, #2 + bgt .Lc2u_3fupi + beq .Lc2u_2fupi +.Lc2u_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_1nowords + mov r3, r7, pull #8 + ldr r7, [r1], #4 + orr r3, r3, r7, push #24 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_1rem8lp + +.Lc2u_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_1cpy8lp + +.Lc2u_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #8 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #24 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_1fupi +.Lc2u_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_2 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + movgt r3, r7, get_byte_3 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_2nowords + mov r3, r7, pull #16 + ldr r7, [r1], #4 + orr r3, r3, r7, push #16 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_2rem8lp + +.Lc2u_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_2cpy8lp + +.Lc2u_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #16 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #16 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_2fupi +.Lc2u_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_3 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_3nowords + mov r3, r7, pull #24 + ldr r7, [r1], #4 + orr r3, r3, r7, push #8 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_3rem8lp + +.Lc2u_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_3cpy8lp + +.Lc2u_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #24 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #8 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_3fupi +.Lc2u_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished +ENDPROC(__copy_to_user) + + .pushsection .fixup,"ax" + .align 0 +9001: ldmfd sp!, {r0, r4 - r7, pc} + .popsection + +/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); + * Purpose : copy a block from user memory to kernel memory + * Params : to - kernel memory + * : from - user memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ +.Lcfu_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + sub r2, r2, ip + b .Lcfu_dest_aligned + +ENTRY(__copy_from_user) + stmfd sp!, {r0, r2, r4 - r7, lr} + cmp r2, #4 + blt .Lcfu_not_enough + ands ip, r0, #3 + bne .Lcfu_dest_not_aligned +.Lcfu_dest_aligned: + ands ip, r1, #3 + bne .Lcfu_src_not_aligned + +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lcfu_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_0nowords +USER( TUSER( ldr) r3, [r1], #4) + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lcfu_0rem8lp + +.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault + stmia r0!, {r3 - r6} + ldmia r1!, {r3 - r6} @ Shouldnt fault + subs ip, ip, #32 + stmia r0!, {r3 - r6} + bpl .Lcfu_0cpy8lp + +.Lcfu_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} @ Shouldnt fault + stmgeia r0!, {r3 - r6} + tst ip, #8 + ldmneia r1!, {r3 - r4} @ Shouldnt fault + stmneia r0!, {r3 - r4} + tst ip, #4 + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_0fupi +.Lcfu_0nowords: teq ip, #0 + beq .Lcfu_finished +.Lcfu_nowords: cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_not_enough: + movs ip, r2 + bne .Lcfu_nowords +.Lcfu_finished: mov r0, #0 + add sp, sp, #8 + ldmfd sp!, {r4 - r7, pc} + +.Lcfu_src_not_aligned: + bic r1, r1, #3 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + cmp ip, #2 + bgt .Lcfu_3fupi + beq .Lcfu_2fupi +.Lcfu_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_1nowords + mov r3, r7, pull #8 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #24 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_1rem8lp + +.Lcfu_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} + bpl .Lcfu_1cpy8lp + +.Lcfu_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #8 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #24 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_1fupi +.Lcfu_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_2 + strgeb r3, [r0], #1 + movgt r3, r7, get_byte_3 + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_2nowords + mov r3, r7, pull #16 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #16 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_2rem8lp + + +.Lcfu_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} + bpl .Lcfu_2cpy8lp + +.Lcfu_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #16 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #16 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_2fupi +.Lcfu_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_3 + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_3nowords + mov r3, r7, pull #24 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #8 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_3rem8lp + +.Lcfu_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} @ Shouldnt fault + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} + subs ip, ip, #16 + bpl .Lcfu_3cpy8lp + +.Lcfu_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #24 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #8 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_3fupi +.Lcfu_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished +ENDPROC(__copy_from_user) + + .pushsection .fixup,"ax" + .align 0 + /* + * We took an exception. r0 contains a pointer to + * the byte not copied. + */ +9001: ldr r2, [sp], #4 @ void *to + sub r2, r0, r2 @ bytes copied + ldr r1, [sp], #4 @ unsigned long count + subs r4, r1, r2 @ bytes left to copy + movne r1, r4 + blne __memzero + mov r0, r4 + ldmfd sp!, {r4 - r7, pc} + .popsection + -- cgit v1.2.3-70-g09d2 From 14ebd8a8c15e9fed638120bdb93f1a814e13d6a9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 10 Aug 2012 15:40:12 +0100 Subject: ASoC: wm5102: Add missing input PGA routes Signed-off-by: Mark Brown --- sound/soc/codecs/wm5102.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index 6537f16d383..496ce9a9d8b 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -639,6 +639,15 @@ static const struct snd_soc_dapm_route wm5102_dapm_routes[] = { { "AIF2 Capture", NULL, "SYSCLK" }, { "AIF3 Capture", NULL, "SYSCLK" }, + { "IN1L PGA", NULL, "IN1L" }, + { "IN1R PGA", NULL, "IN1R" }, + + { "IN2L PGA", NULL, "IN2L" }, + { "IN2R PGA", NULL, "IN2R" }, + + { "IN3L PGA", NULL, "IN3L" }, + { "IN3R PGA", NULL, "IN3R" }, + ARIZONA_MIXER_ROUTES("OUT1L", "HPOUT1L"), ARIZONA_MIXER_ROUTES("OUT1R", "HPOUT1R"), ARIZONA_MIXER_ROUTES("OUT2L", "HPOUT2L"), -- cgit v1.2.3-70-g09d2 From 17c3f7e8f3ef796a9db3b22f3797188d0e7ac88c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 10 Aug 2012 15:40:22 +0100 Subject: ASoC: wm5110: Add missing input PGA routes Signed-off-by: Mark Brown --- sound/soc/codecs/wm5110.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index 8033f706518..01ebbcc5c6a 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -681,6 +681,18 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = { { "AIF2 Capture", NULL, "SYSCLK" }, { "AIF3 Capture", NULL, "SYSCLK" }, + { "IN1L PGA", NULL, "IN1L" }, + { "IN1R PGA", NULL, "IN1R" }, + + { "IN2L PGA", NULL, "IN2L" }, + { "IN2R PGA", NULL, "IN2R" }, + + { "IN3L PGA", NULL, "IN3L" }, + { "IN3R PGA", NULL, "IN3R" }, + + { "IN4L PGA", NULL, "IN4L" }, + { "IN4R PGA", NULL, "IN4R" }, + ARIZONA_MIXER_ROUTES("OUT1L", "HPOUT1L"), ARIZONA_MIXER_ROUTES("OUT1R", "HPOUT1R"), ARIZONA_MIXER_ROUTES("OUT2L", "HPOUT2L"), -- cgit v1.2.3-70-g09d2 From 1f68237865b2f55badbb3f73792d573899a62475 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 10 Aug 2012 13:56:27 -0700 Subject: spi/bcm63xx: Ensure that memory is freed only after it is no longer used The call to spi_unregister_master() in the device remove function frees device memory, and with it any device local data. However, device local data is still accessed after the call to spi_unregister_master(). Acquire a reference to the SPI device and release it after cleanup is complete to solve the problem. Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown --- drivers/spi/spi-bcm63xx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 6e25ef1bce9..ea0aaa3f13d 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -438,7 +438,7 @@ out: static int __devexit bcm63xx_spi_remove(struct platform_device *pdev) { - struct spi_master *master = platform_get_drvdata(pdev); + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct bcm63xx_spi *bs = spi_master_get_devdata(master); spi_unregister_master(master); @@ -452,6 +452,8 @@ static int __devexit bcm63xx_spi_remove(struct platform_device *pdev) platform_set_drvdata(pdev, 0); + spi_master_put(master); + return 0; } -- cgit v1.2.3-70-g09d2 From c5491d1ae1946d394389b83b31b87708e86dc4cf Mon Sep 17 00:00:00 2001 From: Timo Kokkonen Date: Sun, 12 Aug 2012 13:45:34 +0300 Subject: ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*() Calling omap_dm_timer_prepare while the spinlock is held is not allowed as sleeping functions are called later on during the preparation (namely within clk_get()). dm_timer_lock is only required for protecting the omap_timer_list. After the timer is marked as reserved, the lock is no longer needed and should be freed. Signed-off-by: Timo Kokkonen Cc: Tarun Kanti DebBarma Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 7b6689af0cc..938b50a3343 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); -- cgit v1.2.3-70-g09d2 From a35b6466aabb051568b844e8c63f87a356d3d129 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 8 Aug 2012 21:46:40 +0200 Subject: sched, cgroup: Reduce rq->lock hold times for large cgroup hierarchies Peter Portante reported that for large cgroup hierarchies (and or on large CPU counts) we get immense lock contention on rq->lock and stuff stops working properly. His workload was a ton of processes, each in their own cgroup, everybody idling except for a sporadic wakeup once every so often. It was found that: schedule() idle_balance() load_balance() local_irq_save() double_rq_lock() update_h_load() walk_tg_tree(tg_load_down) tg_load_down() Results in an entire cgroup hierarchy walk under rq->lock for every new-idle balance and since new-idle balance isn't throttled this results in a lot of work while holding the rq->lock. This patch does two things, it removes the work from under rq->lock based on the good principle of race and pray which is widely employed in the load-balancer as a whole. And secondly it throttles the update_h_load() calculation to max once per jiffy. I considered excluding update_h_load() for new-idle balance all-together, but purely relying on regular balance passes to update this data might not work out under some rare circumstances where the new-idle busiest isn't the regular busiest for a while (unlikely, but a nightmare to debug if someone hits it and suffers). Cc: pjt@google.com Cc: Larry Woodman Cc: Mike Galbraith Reported-by: Peter Portante Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-aaarrzfpnaam7pqrekofu8a6@git.kernel.org Signed-off-by: Thomas Gleixner --- kernel/sched/fair.c | 11 +++++++++-- kernel/sched/sched.h | 6 +++++- 2 files changed, 14 insertions(+), 3 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index d0cc03b3e70..c219bf8d704 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -3387,6 +3387,14 @@ static int tg_load_down(struct task_group *tg, void *data) static void update_h_load(long cpu) { + struct rq *rq = cpu_rq(cpu); + unsigned long now = jiffies; + + if (rq->h_load_throttle == now) + return; + + rq->h_load_throttle = now; + rcu_read_lock(); walk_tg_tree(tg_load_down, tg_nop, (void *)cpu); rcu_read_unlock(); @@ -4293,11 +4301,10 @@ redo: env.src_rq = busiest; env.loop_max = min(sysctl_sched_nr_migrate, busiest->nr_running); + update_h_load(env.src_cpu); more_balance: local_irq_save(flags); double_rq_lock(this_rq, busiest); - if (!env.loop) - update_h_load(env.src_cpu); /* * cur_ld_moved - load moved in current iteration diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index c35a1a7dd4d..531411b1044 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -374,7 +374,11 @@ struct rq { #ifdef CONFIG_FAIR_GROUP_SCHED /* list of leaf cfs_rq on this cpu: */ struct list_head leaf_cfs_rq_list; -#endif +#ifdef CONFIG_SMP + unsigned long h_load_throttle; +#endif /* CONFIG_SMP */ +#endif /* CONFIG_FAIR_GROUP_SCHED */ + #ifdef CONFIG_RT_GROUP_SCHED struct list_head leaf_rt_rq_list; #endif -- cgit v1.2.3-70-g09d2 From bea6832cc8c4a0a9a65dd17da6aaa657fe27bc3e Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 8 Aug 2012 11:27:15 +0200 Subject: sched: fix divide by zero at {thread_group,task}_times On architectures where cputime_t is 64 bit type, is possible to trigger divide by zero on do_div(temp, (__force u32) total) line, if total is a non zero number but has lower 32 bit's zeroed. Removing casting is not a good solution since some do_div() implementations do cast to u32 internally. This problem can be triggered in practice on very long lived processes: PID: 2331 TASK: ffff880472814b00 CPU: 2 COMMAND: "oraagent.bin" #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2 #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00 #3 [ffff880472a51cd0] die at ffffffff8100f26b #4 [ffff880472a51d00] do_trap at ffffffff814f03f4 #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff #6 [ffff880472a51e00] divide_error at ffffffff8100be7b [exception RIP: thread_group_times+0x56] RIP: ffffffff81056a16 RSP: ffff880472a51eb8 RFLAGS: 00010046 RAX: bc3572c9fe12d194 RBX: ffff880874150800 RCX: 0000000110266fad RDX: 0000000000000000 RSI: ffff880472a51eb8 RDI: 001038ae7d9633dc RBP: ffff880472a51ef8 R8: 00000000b10a3a64 R9: ffff880874150800 R10: 00007fcba27ab680 R11: 0000000000000202 R12: ffff880472a51f08 R13: ffff880472a51f10 R14: 0000000000000000 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d #8 [ffff880472a51f40] sys_times at ffffffff81088524 #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2 RIP: 0000003808caac3a RSP: 00007fcba27ab6d8 RFLAGS: 00000202 RAX: 0000000000000064 RBX: ffffffff8100b0f2 RCX: 0000000000000000 RDX: 00007fcba27ab6e0 RSI: 000000000076d58e RDI: 00007fcba27ab6e0 RBP: 00007fcba27ab700 R8: 0000000000000020 R9: 000000000000091b R10: 00007fcba27ab680 R11: 0000000000000202 R12: 00007fff9ca41940 R13: 0000000000000000 R14: 00007fcba27ac9c0 R15: 00007fff9ca41940 ORIG_RAX: 0000000000000064 CS: 0033 SS: 002b Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com Signed-off-by: Thomas Gleixner --- kernel/sched/core.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 2cb4e777799..e2c5841c7df 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -3142,6 +3142,20 @@ void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st) # define nsecs_to_cputime(__nsecs) nsecs_to_jiffies(__nsecs) #endif +static cputime_t scale_utime(cputime_t utime, cputime_t rtime, cputime_t total) +{ + u64 temp = (__force u64) rtime; + + temp *= (__force u64) utime; + + if (sizeof(cputime_t) == 4) + temp = div_u64(temp, (__force u32) total); + else + temp = div64_u64(temp, (__force u64) total); + + return (__force cputime_t) temp; +} + void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st) { cputime_t rtime, utime = p->utime, total = utime + p->stime; @@ -3151,13 +3165,9 @@ void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st) */ rtime = nsecs_to_cputime(p->se.sum_exec_runtime); - if (total) { - u64 temp = (__force u64) rtime; - - temp *= (__force u64) utime; - do_div(temp, (__force u32) total); - utime = (__force cputime_t) temp; - } else + if (total) + utime = scale_utime(utime, rtime, total); + else utime = rtime; /* @@ -3184,13 +3194,9 @@ void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st) total = cputime.utime + cputime.stime; rtime = nsecs_to_cputime(cputime.sum_exec_runtime); - if (total) { - u64 temp = (__force u64) rtime; - - temp *= (__force u64) cputime.utime; - do_div(temp, (__force u32) total); - utime = (__force cputime_t) temp; - } else + if (total) + utime = scale_utime(cputime.utime, rtime, total); + else utime = rtime; sig->prev_utime = max(sig->prev_utime, utime); -- cgit v1.2.3-70-g09d2 From 35cf4e50b16331def6cfcbee11e49270b6db07f5 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Tue, 7 Aug 2012 05:00:13 +0200 Subject: sched,cgroup: Fix up task_groups list With multiple instances of task_groups, for_each_rt_rq() is a noop, no task groups having been added to the rt.c list instance. This renders __enable/disable_runtime() and print_rt_stats() noop, the user (non) visible effect being that rt task groups are missing in /proc/sched_debug. Signed-off-by: Mike Galbraith Cc: stable@kernel.org # v3.3+ Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344308413.6846.7.camel@marge.simpson.net Signed-off-by: Thomas Gleixner --- kernel/sched/core.c | 1 + kernel/sched/sched.h | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index e2c5841c7df..6aa212f3c58 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -7252,6 +7252,7 @@ int in_sched_functions(unsigned long addr) #ifdef CONFIG_CGROUP_SCHED struct task_group root_task_group; +LIST_HEAD(task_groups); #endif DECLARE_PER_CPU(cpumask_var_t, load_balance_tmpmask); diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index 531411b1044..f6714d009e7 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -80,7 +80,7 @@ extern struct mutex sched_domains_mutex; struct cfs_rq; struct rt_rq; -static LIST_HEAD(task_groups); +extern struct list_head task_groups; struct cfs_bandwidth { #ifdef CONFIG_CFS_BANDWIDTH -- cgit v1.2.3-70-g09d2 From e221d028bb08b47e624c5f0a31732c642db9d19a Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Tue, 7 Aug 2012 10:02:38 +0200 Subject: sched,rt: fix isolated CPUs leaving root_task_group indefinitely throttled Root task group bandwidth replenishment must service all CPUs, regardless of where the timer was last started, and regardless of the isolation mechanism, lest 'Quoth the Raven, "Nevermore"' become rt scheduling policy. Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344326558.6968.25.camel@marge.simpson.net Signed-off-by: Thomas Gleixner --- kernel/sched/rt.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c index 573e1ca0110..944cb68420e 100644 --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -788,6 +788,19 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun) const struct cpumask *span; span = sched_rt_period_mask(); +#ifdef CONFIG_RT_GROUP_SCHED + /* + * FIXME: isolated CPUs should really leave the root task group, + * whether they are isolcpus or were isolated via cpusets, lest + * the timer run on a CPU which does not service all runqueues, + * potentially leaving other CPUs indefinitely throttled. If + * isolation is really required, the user will turn the throttle + * off to kill the perturbations it causes anyway. Meanwhile, + * this maintains functionality for boot and/or troubleshooting. + */ + if (rt_b == &root_task_group.rt_bandwidth) + span = cpu_online_mask; +#endif for_each_cpu(i, span) { int enqueue = 0; struct rt_rq *rt_rq = sched_rt_period_rt_rq(rt_b, i); -- cgit v1.2.3-70-g09d2 From 8f6189684eb4e85e6c593cd710693f09c944450a Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Sat, 4 Aug 2012 05:44:14 +0200 Subject: sched: Fix migration thread runtime bogosity Make stop scheduler class do the same accounting as other classes, Migration threads can be caught in the act while doing exec balancing, leading to the below due to use of unmaintained ->se.exec_start. The load that triggered this particular instance was an apparently out of control heavily threaded application that does system monitoring in what equated to an exec bomb, with one of the VERY frequently migrated tasks being ps. %CPU PID USER CMD 99.3 45 root [migration/10] 97.7 53 root [migration/12] 97.0 57 root [migration/13] 90.1 49 root [migration/11] 89.6 65 root [migration/15] 88.7 17 root [migration/3] 80.4 37 root [migration/8] 78.1 41 root [migration/9] 44.2 13 root [migration/2] Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344051854.6739.19.camel@marge.simpson.net Signed-off-by: Thomas Gleixner --- kernel/sched/stop_task.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/kernel/sched/stop_task.c b/kernel/sched/stop_task.c index 7b386e86fd2..da5eb5bed84 100644 --- a/kernel/sched/stop_task.c +++ b/kernel/sched/stop_task.c @@ -27,8 +27,10 @@ static struct task_struct *pick_next_task_stop(struct rq *rq) { struct task_struct *stop = rq->stop; - if (stop && stop->on_rq) + if (stop && stop->on_rq) { + stop->se.exec_start = rq->clock_task; return stop; + } return NULL; } @@ -52,6 +54,21 @@ static void yield_task_stop(struct rq *rq) static void put_prev_task_stop(struct rq *rq, struct task_struct *prev) { + struct task_struct *curr = rq->curr; + u64 delta_exec; + + delta_exec = rq->clock_task - curr->se.exec_start; + if (unlikely((s64)delta_exec < 0)) + delta_exec = 0; + + schedstat_set(curr->se.statistics.exec_max, + max(curr->se.statistics.exec_max, delta_exec)); + + curr->se.sum_exec_runtime += delta_exec; + account_group_exec_runtime(curr, delta_exec); + + curr->se.exec_start = rq->clock_task; + cpuacct_charge(curr, delta_exec); } static void task_tick_stop(struct rq *rq, struct task_struct *curr, int queued) @@ -60,6 +77,9 @@ static void task_tick_stop(struct rq *rq, struct task_struct *curr, int queued) static void set_curr_task_stop(struct rq *rq) { + struct task_struct *stop = rq->stop; + + stop->se.exec_start = rq->clock_task; } static void switched_to_stop(struct rq *rq, struct task_struct *p) -- cgit v1.2.3-70-g09d2 From 0bce9c46bf3b15f485d82d7e81dabed6ebcc24b1 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Aug 2012 15:22:09 +0100 Subject: mutex: Place lock in contended state after fastpath_lock failure ARM recently moved to asm-generic/mutex-xchg.h for its mutex implementation after the previous implementation was found to be missing some crucial memory barriers. However, this has revealed some problems running hackbench on SMP platforms due to the way in which the MUTEX_SPIN_ON_OWNER code operates. The symptoms are that a bunch of hackbench tasks are left waiting on an unlocked mutex and therefore never get woken up to claim it. This boils down to the following sequence of events: Task A Task B Task C Lock value 0 1 1 lock() 0 2 lock() 0 3 spin(A) 0 4 unlock() 1 5 lock() 0 6 cmpxchg(1,0) 0 7 contended() -1 8 lock() 0 9 spin(C) 0 10 unlock() 1 11 cmpxchg(1,0) 0 12 unlock() 1 At this point, the lock is unlocked, but Task B is in an uninterruptible sleep with nobody to wake it up. This patch fixes the problem by ensuring we put the lock into the contended state if we fail to acquire it on the fastpath, ensuring that any blocked waiters are woken up when the mutex is released. Signed-off-by: Will Deacon Cc: Arnd Bergmann Cc: Chris Mason Cc: Ingo Molnar Cc: Reviewed-by: Nicolas Pitre Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-6e9lrw2avczr0617fzl5vqb8@git.kernel.org Signed-off-by: Thomas Gleixner --- include/asm-generic/mutex-xchg.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h index 580a6d35c70..c04e0db8a2d 100644 --- a/include/asm-generic/mutex-xchg.h +++ b/include/asm-generic/mutex-xchg.h @@ -26,7 +26,13 @@ static inline void __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) { if (unlikely(atomic_xchg(count, 0) != 1)) - fail_fn(count); + /* + * We failed to acquire the lock, so mark it contended + * to ensure that any waiting tasks are woken up by the + * unlock slow path. + */ + if (likely(atomic_xchg(count, -1) != 1)) + fail_fn(count); } /** @@ -43,7 +49,8 @@ static inline int __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) { if (unlikely(atomic_xchg(count, 0) != 1)) - return fail_fn(count); + if (likely(atomic_xchg(count, -1) != 1)) + return fail_fn(count); return 0; } -- cgit v1.2.3-70-g09d2 From cffa59baa5f1cf3e3e9e172697db48912471531c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 2 Aug 2012 12:55:27 +0200 Subject: perf, x86: Fix uncore_types_exit section mismatch Fix the following section mismatch: WARNING: arch/x86/kernel/cpu/built-in.o(.text+0x7ad9): Section mismatch in reference from the function uncore_types_exit() to the function .init.text:uncore_type_exit() The function uncore_types_exit() references the function __init uncore_type_exit(). This is often because uncore_types_exit lacks a __init annotation or the annotation of uncore_type_exit is wrong. caused by 14371cce03c2 ("perf: Add generic PCI uncore PMU device support"). Cc: Zheng Yan Cc: Ingo Molnar Signed-off-by: Borislav Petkov Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1339741902-8449-8-git-send-email-zheng.z.yan@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel_uncore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 7563fda9f03..a7ccd68aa13 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -2373,7 +2373,7 @@ static void __init uncore_type_exit(struct intel_uncore_type *type) type->attr_groups[1] = NULL; } -static void uncore_types_exit(struct intel_uncore_type **types) +static void __init uncore_types_exit(struct intel_uncore_type **types) { int i; for (i = 0; types[i]; i++) -- cgit v1.2.3-70-g09d2 From ebb6cc03596cc89c89670473282ea46573feb34f Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Mon, 6 Aug 2012 13:11:21 +0800 Subject: perf/x86: Fixes for Nehalem-EX uncore driver This patch includes following fixes and update: - Only some events in the Sbox and Mbox can use the match/mask registers, add code to check this. - The format definitions for xbr_mm_cfg and xbr_match registers in the Rbox are wrong, xbr_mm_cfg should use 32 bits, xbr_match should use 64 bits. - Cleanup the Rbox code. Compute the addresses extra registers in the enable_event function instead of the hw_config function. This simplifies the code in nhmex_rbox_alter_er(). Signed-off-by: Yan, Zheng Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344229882-3907-2-git-send-email-zheng.z.yan@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel_uncore.c | 195 ++++++++++++-------------- arch/x86/kernel/cpu/perf_event_intel_uncore.h | 1 + 2 files changed, 87 insertions(+), 109 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index a7ccd68aa13..84434e2a676 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -796,7 +796,6 @@ static struct intel_uncore_type *nhm_msr_uncores[] = { DEFINE_UNCORE_FORMAT_ATTR(event5, event, "config:1-5"); DEFINE_UNCORE_FORMAT_ATTR(counter, counter, "config:6-7"); -DEFINE_UNCORE_FORMAT_ATTR(mm_cfg, mm_cfg, "config:63"); DEFINE_UNCORE_FORMAT_ATTR(match, match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(mask, mask, "config2:0-63"); @@ -1032,24 +1031,22 @@ static struct intel_uncore_type nhmex_uncore_bbox = { static int nhmex_sbox_hw_config(struct intel_uncore_box *box, struct perf_event *event) { - struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; - struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; + struct hw_perf_event *hwc = &event->hw; + struct hw_perf_event_extra *reg1 = &hwc->extra_reg; + struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - if (event->attr.config & NHMEX_S_PMON_MM_CFG_EN) { - reg1->config = event->attr.config1; - reg2->config = event->attr.config2; - } else { - reg1->config = ~0ULL; - reg2->config = ~0ULL; - } + /* only TO_R_PROG_EV event uses the match/mask register */ + if ((hwc->config & NHMEX_PMON_CTL_EV_SEL_MASK) != + NHMEX_S_EVENT_TO_R_PROG_EV) + return 0; if (box->pmu->pmu_idx == 0) reg1->reg = NHMEX_S0_MSR_MM_CFG; else reg1->reg = NHMEX_S1_MSR_MM_CFG; - reg1->idx = 0; - + reg1->config = event->attr.config1; + reg2->config = event->attr.config2; return 0; } @@ -1059,8 +1056,8 @@ static void nhmex_sbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - wrmsrl(reg1->reg, 0); - if (reg1->config != ~0ULL || reg2->config != ~0ULL) { + if (reg1->idx != EXTRA_REG_NONE) { + wrmsrl(reg1->reg, 0); wrmsrl(reg1->reg + 1, reg1->config); wrmsrl(reg1->reg + 2, reg2->config); wrmsrl(reg1->reg, NHMEX_S_PMON_MM_CFG_EN); @@ -1074,7 +1071,6 @@ static struct attribute *nhmex_uncore_sbox_formats_attr[] = { &format_attr_edge.attr, &format_attr_inv.attr, &format_attr_thresh8.attr, - &format_attr_mm_cfg.attr, &format_attr_match.attr, &format_attr_mask.attr, NULL, @@ -1264,7 +1260,8 @@ again: } /* for the match/mask registers */ - if ((uncore_box_is_fake(box) || !reg2->alloc) && + if (reg2->idx != EXTRA_REG_NONE && + (uncore_box_is_fake(box) || !reg2->alloc) && !nhmex_mbox_get_shared_reg(box, reg2->idx, reg2->config)) goto fail; @@ -1278,7 +1275,8 @@ again: if (idx[0] != 0xff && idx[0] != __BITS_VALUE(reg1->idx, 0, 8)) nhmex_mbox_alter_er(event, idx[0], true); reg1->alloc |= alloc; - reg2->alloc = 1; + if (reg2->idx != EXTRA_REG_NONE) + reg2->alloc = 1; } return NULL; fail: @@ -1342,9 +1340,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event struct extra_reg *er; unsigned msr; int reg_idx = 0; - - if (WARN_ON_ONCE(reg1->idx != -1)) - return -EINVAL; /* * The mbox events may require 2 extra MSRs at the most. But only * the lower 32 bits in these MSRs are significant, so we can use @@ -1355,11 +1350,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event continue; if (event->attr.config1 & ~er->valid_mask) return -EINVAL; - if (er->idx == __BITS_VALUE(reg1->idx, 0, 8) || - er->idx == __BITS_VALUE(reg1->idx, 1, 8)) - continue; - if (WARN_ON_ONCE(reg_idx >= 2)) - return -EINVAL; msr = er->msr + type->msr_offset * box->pmu->pmu_idx; if (WARN_ON_ONCE(msr >= 0xffff || er->idx >= 0xff)) @@ -1368,6 +1358,8 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event /* always use the 32~63 bits to pass the PLD config */ if (er->idx == EXTRA_REG_NHMEX_M_PLD) reg_idx = 1; + else if (WARN_ON_ONCE(reg_idx > 0)) + return -EINVAL; reg1->idx &= ~(0xff << (reg_idx * 8)); reg1->reg &= ~(0xffff << (reg_idx * 16)); @@ -1376,17 +1368,21 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->config = event->attr.config1; reg_idx++; } - /* use config2 to pass the filter config */ - reg2->idx = EXTRA_REG_NHMEX_M_FILTER; - if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) - reg2->config = event->attr.config2; - else - reg2->config = ~0ULL; - if (box->pmu->pmu_idx == 0) - reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; - else - reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; - + /* + * The mbox only provides ability to perform address matching + * for the PLD events. + */ + if (reg_idx == 2) { + reg2->idx = EXTRA_REG_NHMEX_M_FILTER; + if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) + reg2->config = event->attr.config2; + else + reg2->config = ~0ULL; + if (box->pmu->pmu_idx == 0) + reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; + else + reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; + } return 0; } @@ -1422,34 +1418,36 @@ static void nhmex_mbox_msr_enable_event(struct intel_uncore_box *box, struct per wrmsrl(__BITS_VALUE(reg1->reg, 1, 16), nhmex_mbox_shared_reg_config(box, idx)); - wrmsrl(reg2->reg, 0); - if (reg2->config != ~0ULL) { - wrmsrl(reg2->reg + 1, - reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); - wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & - (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); - wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + if (reg2->idx != EXTRA_REG_NONE) { + wrmsrl(reg2->reg, 0); + if (reg2->config != ~0ULL) { + wrmsrl(reg2->reg + 1, + reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); + wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & + (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); + wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + } } wrmsrl(hwc->config_base, hwc->config | NHMEX_PMON_CTL_EN_BIT0); } -DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); -DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); -DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); -DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); -DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); -DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); -DEFINE_UNCORE_FORMAT_ATTR(filter_cfg, filter_cfg, "config2:63"); -DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); -DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); -DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); +DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); +DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); +DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); +DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); +DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); +DEFINE_UNCORE_FORMAT_ATTR(filter_cfg_en, filter_cfg_en, "config2:63"); +DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); +DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); +DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_count_mode.attr, @@ -1458,7 +1456,7 @@ static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_flag_mode.attr, &format_attr_inc_sel.attr, &format_attr_set_flag_sel.attr, - &format_attr_filter_cfg.attr, + &format_attr_filter_cfg_en.attr, &format_attr_filter_match.attr, &format_attr_filter_mask.attr, &format_attr_dsp.attr, @@ -1513,7 +1511,7 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) struct hw_perf_event_extra *reg1 = &hwc->extra_reg; int port; - /* adjust the main event selector */ + /* adjust the main event selector and extra register index */ if (reg1->idx % 2) { reg1->idx--; hwc->config -= 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1522,29 +1520,17 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) hwc->config += 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; } - /* adjust address or config of extra register */ + /* adjust extra register config */ port = reg1->idx / 6 + box->pmu->pmu_idx * 4; switch (reg1->idx % 6) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; case 2: - /* the 8~15 bits to the 0~7 bits */ + /* shift the 8~15 bits to the 0~7 bits */ reg1->config >>= 8; break; case 3: - /* the 0~7 bits to the 8~15 bits */ + /* shift the 0~7 bits to the 8~15 bits */ reg1->config <<= 8; break; - case 4: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - break; - case 5: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - break; }; } @@ -1671,7 +1657,7 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; - int port, idx; + int idx; idx = (event->hw.config & NHMEX_R_PMON_CTL_EV_SEL_MASK) >> NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1681,27 +1667,11 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->idx = idx; reg1->config = event->attr.config1; - port = idx / 6 + box->pmu->pmu_idx * 4; - idx %= 6; - switch (idx) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; - case 2: - case 3: - reg1->reg = NHMEX_R_MSR_PORTN_QLX_CFG(port); - break; + switch (idx % 6) { case 4: case 5: - if (idx == 4) - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - else - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - reg2->config = event->attr.config2; hwc->config |= event->attr.config & (~0ULL << 32); + reg2->config = event->attr.config2; break; }; return 0; @@ -1727,28 +1697,34 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - int idx, er_idx; + int idx, port; - idx = reg1->idx % 6; - er_idx = idx; - if (er_idx > 2) - er_idx--; - er_idx += (reg1->idx / 6) * 5; + idx = reg1->idx; + port = idx / 6 + box->pmu->pmu_idx * 4; - switch (idx) { + switch (idx % 6) { case 0: + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG0(port), reg1->config); + break; case 1: - wrmsrl(reg1->reg, reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG1(port), reg1->config); break; case 2: case 3: - wrmsrl(reg1->reg, nhmex_rbox_shared_reg_config(box, er_idx)); + wrmsrl(NHMEX_R_MSR_PORTN_QLX_CFG(port), + nhmex_rbox_shared_reg_config(box, 2 + (idx / 6) * 5)); break; case 4: + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MASK(port), reg2->config); + break; case 5: - wrmsrl(reg1->reg, reg1->config); - wrmsrl(reg1->reg + 1, hwc->config >> 32); - wrmsrl(reg1->reg + 2, reg2->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MASK(port), reg2->config); break; }; @@ -1756,8 +1732,8 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per (hwc->config & NHMEX_R_PMON_CTL_EV_SEL_MASK)); } -DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config:32-63"); -DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config1:0-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(xbr_mask, xbr_mask, "config2:0-63"); DEFINE_UNCORE_FORMAT_ATTR(qlx_cfg, qlx_cfg, "config1:0-15"); DEFINE_UNCORE_FORMAT_ATTR(iperf_cfg, iperf_cfg, "config1:0-31"); @@ -2303,6 +2279,7 @@ int uncore_pmu_event_init(struct perf_event *event) event->hw.idx = -1; event->hw.last_tag = ~0ULL; event->hw.extra_reg.idx = EXTRA_REG_NONE; + event->hw.branch_reg.idx = EXTRA_REG_NONE; if (event->attr.config == UNCORE_FIXED_EVENT) { /* no fixed counter */ diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h index c9e5dc56630..8384e9b543b 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h @@ -230,6 +230,7 @@ #define NHMEX_S1_MSR_MASK 0xe5a #define NHMEX_S_PMON_MM_CFG_EN (0x1ULL << 63) +#define NHMEX_S_EVENT_TO_R_PROG_EV 0 /* NHM-EX Mbox */ #define NHMEX_M0_MSR_GLOBAL_CTL 0xca0 -- cgit v1.2.3-70-g09d2 From cb37af77124e8532e6ae3f9ca332593ba423b5f8 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Mon, 6 Aug 2012 13:11:22 +0800 Subject: perf/x86: Add Intel Westmere-EX uncore support The Westmere-EX uncore is similar to the Nehalem-EX uncore. The differences are: - Westmere-EX uncore has 10 instances of Cbox. The MSRs for Cbox8 and Cbox9 in the Westmere-EX aren't contiguous with Cbox 0~7. - The fvid field in the ZDP_CTL_FVC register in the Mbox is different. It's 5 bits in the Nehalem-EX, 6 bits in the Westmere-EX. Signed-off-by: Yan, Zheng Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344229882-3907-3-git-send-email-zheng.z.yan@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel_uncore.c | 56 ++++++++++++++++++++++----- arch/x86/kernel/cpu/perf_event_intel_uncore.h | 45 ++++++++++----------- 2 files changed, 68 insertions(+), 33 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 84434e2a676..0a5571080e7 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -901,16 +901,21 @@ static struct attribute_group nhmex_uncore_cbox_format_group = { .attrs = nhmex_uncore_cbox_formats_attr, }; +/* msr offset for each instance of cbox */ +static unsigned nhmex_cbox_msr_offsets[] = { + 0x0, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x240, 0x2c0, +}; + static struct intel_uncore_type nhmex_uncore_cbox = { .name = "cbox", .num_counters = 6, - .num_boxes = 8, + .num_boxes = 10, .perf_ctr_bits = 48, .event_ctl = NHMEX_C0_MSR_PMON_EV_SEL0, .perf_ctr = NHMEX_C0_MSR_PMON_CTR0, .event_mask = NHMEX_PMON_RAW_EVENT_MASK, .box_ctl = NHMEX_C0_MSR_PMON_GLOBAL_CTL, - .msr_offset = NHMEX_C_MSR_OFFSET, + .msr_offsets = nhmex_cbox_msr_offsets, .pair_ctr_ctl = 1, .ops = &nhmex_uncore_ops, .format_group = &nhmex_uncore_cbox_format_group @@ -1138,6 +1143,9 @@ static struct extra_reg nhmex_uncore_mbox_extra_regs[] = { EVENT_EXTRA_END }; +/* Nehalem-EX or Westmere-EX ? */ +bool uncore_nhmex; + static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 config) { struct intel_uncore_extra_reg *er; @@ -1167,18 +1175,29 @@ static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 return false; /* mask of the shared fields */ - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK; er = &box->shared_regs[EXTRA_REG_NHMEX_M_ZDP_CTL_FVC]; raw_spin_lock_irqsave(&er->lock, flags); /* add mask of the non-shared field if it's in use */ - if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) - mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) { + if (uncore_nhmex) + mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask |= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + } if (!atomic_read(&er->ref) || !((er->config ^ config) & mask)) { atomic_add(1 << (idx * 8), &er->ref); - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | - NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | + NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK | + WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); er->config &= ~mask; er->config |= (config & mask); ret = true; @@ -1212,7 +1231,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) /* get the non-shared control bits and shift them */ idx = orig_idx - EXTRA_REG_NHMEX_M_ZDP_CTL_FVC; - config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + config &= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); if (new_idx > orig_idx) { idx = new_idx - orig_idx; config <<= 3 * idx; @@ -1222,6 +1244,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) } /* add the shared control bits back */ + if (uncore_nhmex) + config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; + else + config |= WSMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; if (modify) { /* adjust the main event selector */ @@ -1480,6 +1506,12 @@ static struct uncore_event_desc nhmex_uncore_mbox_events[] = { { /* end: all zeroes */ }, }; +static struct uncore_event_desc wsmex_uncore_mbox_events[] = { + INTEL_UNCORE_EVENT_DESC(bbox_cmds_read, "inc_sel=0xd,fvc=0x5000"), + INTEL_UNCORE_EVENT_DESC(bbox_cmds_write, "inc_sel=0xd,fvc=0x5040"), + { /* end: all zeroes */ }, +}; + static struct intel_uncore_ops nhmex_uncore_mbox_ops = { NHMEX_UNCORE_OPS_COMMON_INIT(), .enable_event = nhmex_mbox_msr_enable_event, @@ -2791,7 +2823,13 @@ static int __init uncore_cpu_init(void) snbep_uncore_cbox.num_boxes = max_cores; msr_uncores = snbep_msr_uncores; break; - case 46: + case 46: /* Nehalem-EX */ + uncore_nhmex = true; + case 47: /* Westmere-EX aka. Xeon E7 */ + if (!uncore_nhmex) + nhmex_uncore_mbox.event_descs = wsmex_uncore_mbox_events; + if (nhmex_uncore_cbox.num_boxes > max_cores) + nhmex_uncore_cbox.num_boxes = max_cores; msr_uncores = nhmex_msr_uncores; break; default: diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h index 8384e9b543b..5b81c1856aa 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h @@ -276,18 +276,12 @@ NHMEX_M_PMON_CTL_INC_SEL_MASK | \ NHMEX_M_PMON_CTL_SET_FLAG_SEL_MASK) - -#define NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK 0x1f -#define NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK (0x7 << 5) -#define NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK (0x7 << 8) -#define NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR (1 << 23) -#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK \ - (NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR) +#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 11) - 1) | (1 << 23)) #define NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (11 + 3 * (n))) +#define WSMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 12) - 1) | (1 << 24)) +#define WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (12 + 3 * (n))) + /* * use the 9~13 bits to select event If the 7th bit is not set, * otherwise use the 19~21 bits to select event. @@ -369,6 +363,7 @@ struct intel_uncore_type { unsigned num_shared_regs:8; unsigned single_fixed:1; unsigned pair_ctr_ctl:1; + unsigned *msr_offsets; struct event_constraint unconstrainted; struct event_constraint *constraints; struct intel_uncore_pmu *pmus; @@ -486,29 +481,31 @@ unsigned uncore_pci_perf_ctr(struct intel_uncore_box *box, int idx) return idx * 8 + box->pmu->type->perf_ctr; } -static inline -unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_box_offset(struct intel_uncore_box *box) +{ + struct intel_uncore_pmu *pmu = box->pmu; + return pmu->type->msr_offsets ? + pmu->type->msr_offsets[pmu->pmu_idx] : + pmu->type->msr_offset * pmu->pmu_idx; +} + +static inline unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->box_ctl) return 0; - return box->pmu->type->box_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->box_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->fixed_ctl) return 0; - return box->pmu->type->fixed_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) { - return box->pmu->type->fixed_ctr + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctr + uncore_msr_box_offset(box); } static inline @@ -516,7 +513,7 @@ unsigned uncore_msr_event_ctl(struct intel_uncore_box *box, int idx) { return box->pmu->type->event_ctl + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline @@ -524,7 +521,7 @@ unsigned uncore_msr_perf_ctr(struct intel_uncore_box *box, int idx) { return box->pmu->type->perf_ctr + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline -- cgit v1.2.3-70-g09d2 From 26a4f3c08de49c1437a7b7f97693cf22d8c31656 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Thu, 9 Aug 2012 11:52:34 +0300 Subject: perf/x86: disable PEBS on a guest entry. If PMU counter has PEBS enabled it is not enough to disable counter on a guest entry since PEBS memory write can overshoot guest entry and corrupt guest memory. Disabling PEBS during guest entry solves the problem. Tested-by: David Ahern Signed-off-by: Gleb Natapov Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120809085234.GI3341@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 382366977d4..7f2739e03e7 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1522,8 +1522,16 @@ static struct perf_guest_switch_msr *intel_guest_get_msrs(int *nr) arr[0].msr = MSR_CORE_PERF_GLOBAL_CTRL; arr[0].host = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_guest_mask; arr[0].guest = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_host_mask; + /* + * If PMU counter has PEBS enabled it is not enough to disable counter + * on a guest entry since PEBS memory write can overshoot guest entry + * and corrupt guest memory. Disabling PEBS solves the problem. + */ + arr[1].msr = MSR_IA32_PEBS_ENABLE; + arr[1].host = cpuc->pebs_enabled; + arr[1].guest = 0; - *nr = 1; + *nr = 2; return arr; } -- cgit v1.2.3-70-g09d2 From e18287d301bf56dd820137026d51ab38cf6c2e83 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 5 Aug 2012 15:04:42 +0000 Subject: ARM: mv78xx0: fix win_cfg_base prototype Patch b6d1c33a31 "ARM: Orion: Consolidate the address map setup" tried to merge the address map for the four orion platforms, but apparently got it wrong for mv78xx0. Admittedly I don't understand what this code actually does, but it's clear that the current version is wrong. Without this patch, building mv78xx0_defconfig results in: arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: (near initialization for 'addr_map_cfg.win_cfg_base') [enabled by default] Signed-off-by: Arnd Bergmann Acked-by: Andrew Lunn Cc: Michael Walle Cc: Nicolas Pitre --- arch/arm/mach-mv78xx0/addr-map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d710ef..a9bc84180d2 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. -- cgit v1.2.3-70-g09d2 From e1352fde5682ab1bdd2a9e5d75c22d1fe210ef77 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Fri, 10 Aug 2012 11:00:24 +0200 Subject: ath9k: fix decrypt_error initialization in ath_rx_tasklet() ath_rx_tasklet() calls ath9k_rx_skb_preprocess() and ath9k_rx_skb_postprocess() in a loop over the received frames. The decrypt_error flag is initialized to false just outside ath_rx_tasklet() loop. ath9k_rx_accept(), called by ath9k_rx_skb_preprocess(), only sets decrypt_error to true and never to false. Then ath_rx_tasklet() calls ath9k_rx_skb_postprocess() and passes decrypt_error to it. So, after a decryption error, in ath9k_rx_skb_postprocess(), we can have a leftover value from another processed frame. In that case, the frame will not be marked with RX_FLAG_DECRYPTED even if it is decrypted correctly. When using CCMP encryption this issue can lead to connection stuck because of CCMP PN corruption and a waste of CPU time since mac80211 tries to decrypt an already deciphered frame with ieee80211_aes_ccm_decrypt. Fix the issue initializing decrypt_error flag at the begging of the ath_rx_tasklet() loop. Signed-off-by: Lorenzo Bianconi Cc: Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 12aca02228c..4480c0cc655 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1044,7 +1044,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) struct ieee80211_hw *hw = sc->hw; struct ieee80211_hdr *hdr; int retval; - bool decrypt_error = false; struct ath_rx_status rs; enum ath9k_rx_qtype qtype; bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA); @@ -1066,6 +1065,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) tsf_lower = tsf & 0xffffffff; do { + bool decrypt_error = false; /* If handling rx interrupt and flush is in progress => exit */ if (test_bit(SC_OP_RXFLUSH, &sc->sc_flags) && (flush == 0)) break; -- cgit v1.2.3-70-g09d2 From 7dd6753f6d2e7e0ccbf2263cef3a9fff6bc89988 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 12 Aug 2012 21:18:33 -0400 Subject: ath5k: fix spin_lock_irqsave/spin_lock_bh nesting in mesh Lockdep found an inconsistent lock state when joining a mesh with ath5k. The problem is that ath5k takes the lock for its beacon state, ah->block, with spin_lock_irqsave(), while mesh internally takes the sync_offset_lock with spin_lock_bh() in mesh_sync_offset_adjust_tbtt(), which in turn is called under ah->block. This could deadlock if the beacon tasklet was run on the processor that held the beacon lock during the do_softirq() in spin_unlock_bh(). We probably shouldn't hold the lock around the callbacks, but the easiest fix is to switch to spin_lock_bh for ah->block: it doesn't need interrupts disabled anyway as the data in question is only accessed in softirq or process context. Fixes the following lockdep warning: [ 446.892304] WARNING: at kernel/softirq.c:159 _local_bh_enable_ip+0x38/0xa6() [ 446.892306] Hardware name: MacBook1,1 [ 446.892309] Modules linked in: tcp_lp fuse sunrpc cpufreq_ondemand acpi_cpufreq mperf ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 ip6table_filter nf_defrag_ipv4 xt_state nf_conntrack ip6_tables ext2 arc4 btusb bluetooth snd_hda_codec_idt snd_hda_intel carl9170 snd_hda_codec coretemp joydev ath5k snd_hwdep snd_seq isight_firmware ath snd_seq_device snd_pcm applesmc appletouch mac80211 input_polldev snd_timer microcode cfg80211 snd lpc_ich pcspkr i2c_i801 mfd_core soundcore rfkill snd_page_alloc sky2 tpm_infineon virtio_net kvm_intel kvm i915 drm_kms_helper drm i2c_algo_bit i2c_core video [ 446.892385] Pid: 1892, comm: iw Not tainted 3.6.0-rc1-wl+ #296 [ 446.892387] Call Trace: [ 446.892394] [] warn_slowpath_common+0x7c/0x91 [ 446.892398] [] ? _local_bh_enable_ip+0x38/0xa6 [ 446.892403] [] ? _local_bh_enable_ip+0x38/0xa6 [ 446.892459] [] ? mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 446.892464] [] warn_slowpath_null+0x22/0x24 [ 446.892468] [] _local_bh_enable_ip+0x38/0xa6 [ 446.892473] [] local_bh_enable_ip+0xd/0xf [ 446.892479] [] _raw_spin_unlock_bh+0x34/0x37 [ 446.892527] [] mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 446.892569] [] ieee80211_beacon_get_tim+0x28f/0x4e0 [mac80211] [ 446.892575] [] ? trace_hardirqs_on_caller+0x10e/0x13f [ 446.892591] [] ath5k_beacon_update+0x40/0x26b [ath5k] [ 446.892597] [] ? lock_acquired+0x1f5/0x21e [ 446.892612] [] ? ath5k_bss_info_changed+0x167/0x1b2 [ath5k] [ 446.892617] [] ? _raw_spin_lock_irqsave+0x78/0x82 [ 446.892632] [] ? ath5k_bss_info_changed+0x167/0x1b2 [ath5k] [ 446.892647] [] ath5k_bss_info_changed+0x175/0x1b2 [ath5k] [ 446.892651] [] ? lock_is_held+0x73/0x7b [ 446.892662] [] ? __might_sleep+0xa7/0x17a [ 446.892698] [] ieee80211_bss_info_change_notify+0x1ed/0x21a [mac80211] [ 446.892703] [] ? queue_work+0x24/0x32 [ 446.892718] [] ? ath5k_configure_filter+0x163/0x163 [ath5k] [ 446.892766] [] ieee80211_start_mesh+0xb9/0xbd [mac80211] [ 446.892806] [] ieee80211_join_mesh+0x10c/0x116 [mac80211] [ 446.892834] [] __cfg80211_join_mesh+0x176/0x1b3 [cfg80211] [ 446.892855] [] cfg80211_join_mesh+0x4f/0x6a [cfg80211] [ 446.892875] [] nl80211_join_mesh+0x1de/0x1ed [cfg80211] [ 446.892908] [] ? nl80211_set_wiphy+0x4cf/0x4cf [cfg80211] [ 446.892919] [] genl_rcv_msg+0x1d5/0x1f3 [ 446.892940] [] ? genl_rcv+0x25/0x25 [ 446.892946] [] netlink_rcv_skb+0x37/0x78 [ 446.892950] [] genl_rcv+0x1e/0x25 [ 446.892955] [] netlink_unicast+0xc3/0x12d [ 446.892959] [] netlink_sendmsg+0x1e9/0x213 [ 446.892966] [] sock_sendmsg+0x79/0x96 [ 446.892972] [] ? might_fault+0x9d/0xa3 [ 446.892978] [] ? copy_from_user+0x8/0xa [ 446.892983] [] ? verify_iovec+0x43/0x77 [ 446.892987] [] __sys_sendmsg+0x180/0x215 [ 446.892993] [] ? sched_clock_cpu+0x134/0x144 [ 446.892997] [] ? trace_hardirqs_off+0xb/0xd [ 446.893002] [] ? __lock_acquire+0x46b/0xb6e [ 446.893006] [] ? trace_hardirqs_off+0xb/0xd [ 446.893010] [] ? local_clock+0x32/0x49 [ 446.893015] [] ? lock_release_holdtime.part.9+0x4b/0x51 [ 446.893020] [] ? lock_is_held+0x73/0x7b [ 446.893025] [] ? fcheck_files+0x97/0xcd [ 446.893029] [] ? fget_light+0x2d/0x81 [ 446.893034] [] sys_sendmsg+0x3b/0x52 [ 446.893038] [] sys_socketcall+0x238/0x2a2 [ 446.893044] [] sysenter_do_call+0x12/0x38 [ 446.893047] ---[ end trace a9af5998f929270f ]--- [ 447.627222] [ 447.627232] ================================= [ 447.627237] [ INFO: inconsistent lock state ] [ 447.627244] 3.6.0-rc1-wl+ #296 Tainted: G W [ 447.627248] --------------------------------- [ 447.627253] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 447.627260] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 447.627264] (&(&ah->block)->rlock){+.?...}, at: [] ath5k_tasklet_beacon+0x91/0xa7 [ath5k] [ 447.627299] {SOFTIRQ-ON-W} state was registered at: [ 447.627304] [] mark_held_locks+0x59/0x77 [ 447.627316] [] trace_hardirqs_on_caller+0x10e/0x13f [ 447.627324] [] trace_hardirqs_on+0xb/0xd [ 447.627332] [] _local_bh_enable_ip+0x9e/0xa6 [ 447.627342] [] local_bh_enable_ip+0xd/0xf [ 447.627349] [] _raw_spin_unlock_bh+0x34/0x37 [ 447.627359] [] mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 447.627451] [] ieee80211_beacon_get_tim+0x28f/0x4e0 [mac80211] [ 447.627526] [] ath5k_beacon_update+0x40/0x26b [ath5k] [ 447.627547] [] ath5k_bss_info_changed+0x175/0x1b2 [ath5k] [ 447.627569] [] ieee80211_bss_info_change_notify+0x1ed/0x21a [mac80211] [ 447.627628] [] ieee80211_start_mesh+0xb9/0xbd [mac80211] [ 447.627712] [] ieee80211_join_mesh+0x10c/0x116 [mac80211] [ 447.627782] [] __cfg80211_join_mesh+0x176/0x1b3 [cfg80211] [ 447.627816] [] cfg80211_join_mesh+0x4f/0x6a [cfg80211] [ 447.627845] [] nl80211_join_mesh+0x1de/0x1ed [cfg80211] [ 447.627872] [] genl_rcv_msg+0x1d5/0x1f3 [ 447.627881] [] netlink_rcv_skb+0x37/0x78 [ 447.627891] [] genl_rcv+0x1e/0x25 [ 447.627898] [] netlink_unicast+0xc3/0x12d [ 447.627907] [] netlink_sendmsg+0x1e9/0x213 [ 447.627915] [] sock_sendmsg+0x79/0x96 [ 447.627926] [] __sys_sendmsg+0x180/0x215 [ 447.627934] [] sys_sendmsg+0x3b/0x52 [ 447.627941] [] sys_socketcall+0x238/0x2a2 [ 447.627949] [] sysenter_do_call+0x12/0x38 [ 447.627959] irq event stamp: 1929200 [ 447.627963] hardirqs last enabled at (1929200): [] tasklet_hi_action+0x3e/0xbf [ 447.627972] hardirqs last disabled at (1929199): [] tasklet_hi_action+0x15/0xbf [ 447.627981] softirqs last enabled at (1929196): [] _local_bh_enable+0x12/0x14 [ 447.627989] softirqs last disabled at (1929197): [] do_softirq+0x63/0xb8 [ 447.627999] [ 447.627999] other info that might help us debug this: [ 447.628004] Possible unsafe locking scenario: [ 447.628004] [ 447.628009] CPU0 [ 447.628012] ---- [ 447.628016] lock(&(&ah->block)->rlock); [ 447.628023] [ 447.628027] lock(&(&ah->block)->rlock); [ 447.628034] [ 447.628034] *** DEADLOCK *** Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 6 ++---- drivers/net/wireless/ath/ath5k/mac80211-ops.c | 5 ++--- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 8c4c040a47b..2aab20ee9f3 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2056,9 +2056,7 @@ ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf) void ath5k_beacon_config(struct ath5k_hw *ah) { - unsigned long flags; - - spin_lock_irqsave(&ah->block, flags); + spin_lock_bh(&ah->block); ah->bmisscount = 0; ah->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); @@ -2085,7 +2083,7 @@ ath5k_beacon_config(struct ath5k_hw *ah) ath5k_hw_set_imr(ah, ah->imask); mmiowb(); - spin_unlock_irqrestore(&ah->block, flags); + spin_unlock_bh(&ah->block); } static void ath5k_tasklet_beacon(unsigned long data) diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index 260e7dc7f75..d56453e43d7 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -254,7 +254,6 @@ ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ath5k_vif *avf = (void *)vif->drv_priv; struct ath5k_hw *ah = hw->priv; struct ath_common *common = ath5k_hw_common(ah); - unsigned long flags; mutex_lock(&ah->lock); @@ -300,9 +299,9 @@ ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, } if (changes & BSS_CHANGED_BEACON) { - spin_lock_irqsave(&ah->block, flags); + spin_lock_bh(&ah->block); ath5k_beacon_update(hw, vif); - spin_unlock_irqrestore(&ah->block, flags); + spin_unlock_bh(&ah->block); } if (changes & BSS_CHANGED_BEACON_ENABLED) -- cgit v1.2.3-70-g09d2 From 12022a785328fdf61a3e1a4bc34db0098dabe839 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 13 Aug 2012 16:28:36 +0100 Subject: ASoC: jack: Always notify full jack status Don't just notify for the bits we've updated, notify the full state of the jack otherwise users might get confused by misleading reports. Signed-off-by: Mark Brown --- sound/soc/soc-jack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index 7f8b3b7428b..0c172938b82 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -103,7 +103,7 @@ void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask) } /* Report before the DAPM sync to help users updating micbias status */ - blocking_notifier_call_chain(&jack->notifier, status, jack); + blocking_notifier_call_chain(&jack->notifier, jack->status, jack); snd_soc_dapm_sync(dapm); -- cgit v1.2.3-70-g09d2 From 418edaaba96e58112b15c82b4907084e2a9caf42 Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Fri, 3 Aug 2012 23:59:41 +0000 Subject: RDMA/ucma.c: Fix for events with wrong context on iWARP It is possible for asynchronous RDMA_CM_EVENT_ESTABLISHED events to be generated with ctx->uid == 0, because ucma_set_event_context() copies ctx->uid to the event structure outside of ctx->file->mut. This leads to a crash in the userspace library, since it gets a bogus event. Fix this by taking the mutex a bit earlier in ucma_event_handler. Signed-off-by: Tatyana Nikolova Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/ucma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 6bf85042289..055ed59838d 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -267,6 +267,7 @@ static int ucma_event_handler(struct rdma_cm_id *cm_id, if (!uevent) return event->event == RDMA_CM_EVENT_CONNECT_REQUEST; + mutex_lock(&ctx->file->mut); uevent->cm_id = cm_id; ucma_set_event_context(ctx, event, uevent); uevent->resp.event = event->event; @@ -277,7 +278,6 @@ static int ucma_event_handler(struct rdma_cm_id *cm_id, ucma_copy_conn_event(&uevent->resp.param.conn, &event->param.conn); - mutex_lock(&ctx->file->mut); if (event->event == RDMA_CM_EVENT_CONNECT_REQUEST) { if (!ctx->backlog) { ret = -ENOMEM; -- cgit v1.2.3-70-g09d2 From 265d931a9e9a7e290faa5e2145f4b2ebf38ea84c Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 13 Aug 2012 17:10:46 +0200 Subject: ALSA: hda - Fix 'Beep Playback Switch' with no underlying mute switch Some Conexant devices (e g CX20590) have no mute capability on their Beep widgets. This patch makes sure we don't try setting mutes on those widgets. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index d26ae65b43b..0849aac449f 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -231,15 +231,22 @@ void snd_hda_detach_beep_device(struct hda_codec *codec) } EXPORT_SYMBOL_HDA(snd_hda_detach_beep_device); +static bool ctl_has_mute(struct snd_kcontrol *kcontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + return query_amp_caps(codec, get_amp_nid(kcontrol), + get_amp_direction(kcontrol)) & AC_AMPCAP_MUTE; +} + /* get/put callbacks for beep mute mixer switches */ int snd_hda_mixer_amp_switch_get_beep(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct hda_beep *beep = codec->beep; - if (beep && !beep->enabled) { + if (beep && (!beep->enabled || !ctl_has_mute(kcontrol))) { ucontrol->value.integer.value[0] = - ucontrol->value.integer.value[1] = 0; + ucontrol->value.integer.value[1] = beep->enabled; return 0; } return snd_hda_mixer_amp_switch_get(kcontrol, ucontrol); @@ -263,6 +270,8 @@ int snd_hda_mixer_amp_switch_put_beep(struct snd_kcontrol *kcontrol, enable |= *valp; snd_hda_enable_beep_device(codec, enable); } + if (!ctl_has_mute(kcontrol)) + return 0; return snd_hda_mixer_amp_switch_put(kcontrol, ucontrol); } EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_put_beep); -- cgit v1.2.3-70-g09d2 From 68e035c950dbceaf660144bf74054dfdfb6aad15 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 14 Aug 2012 12:47:37 +0200 Subject: netfilter: ctnetlink: fix missing locking while changing conntrack from nfqueue Since 9cb017665 netfilter: add glue code to integrate nfnetlink_queue and ctnetlink, we can modify the conntrack entry via nfnl_queue. However, the change of the conntrack entry via nfnetlink_queue requires appropriate locking to avoid concurrent updates. Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_netlink.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 14f67a2cbcb..da4fc37a857 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1896,10 +1896,15 @@ static int ctnetlink_nfqueue_parse(const struct nlattr *attr, struct nf_conn *ct) { struct nlattr *cda[CTA_MAX+1]; + int ret; nla_parse_nested(cda, CTA_MAX, attr, ct_nla_policy); - return ctnetlink_nfqueue_parse_ct((const struct nlattr **)cda, ct); + spin_lock_bh(&nf_conntrack_lock); + ret = ctnetlink_nfqueue_parse_ct((const struct nlattr **)cda, ct); + spin_unlock_bh(&nf_conntrack_lock); + + return ret; } static struct nfq_ct_hook ctnetlink_nfqueue_hook = { -- cgit v1.2.3-70-g09d2 From 3bdcff70b6cd049e6f4437b955850f5db83653cc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 14 Aug 2012 17:42:11 +0200 Subject: ALSA: lx6464es: Add a missing error check Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44541 Signed-off-by: Takashi Iwai --- sound/pci/lx6464es/lx6464es.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c index d1ab4370673..5579b08bb35 100644 --- a/sound/pci/lx6464es/lx6464es.c +++ b/sound/pci/lx6464es/lx6464es.c @@ -851,6 +851,8 @@ static int __devinit lx_pcm_create(struct lx6464es *chip) /* hardcoded device name & channel count */ err = snd_pcm_new(chip->card, (char *)card_name, 0, 1, 1, &pcm); + if (err < 0) + return err; pcm->private_data = chip; -- cgit v1.2.3-70-g09d2 From f1c6300183dbf5b9da25988e13f6f25a9e27151b Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Wed, 8 Aug 2012 12:16:52 -0700 Subject: x86, apic: fix broken legacy interrupts in the logical apic mode Recent commit 332afa656e76458ee9cf0f0d123016a0658539e4 cleaned up a workaround that updates irq_cfg domain for legacy irq's that are handled by the IO-APIC. This was assuming that the recent changes in assign_irq_vector() were sufficient to remove the workaround. But this broke couple of AMD platforms. One of them seems to be sending interrupts to the offline cpu's, resulting in spurious "No irq handler for vector xx (irq -1)" messages when those cpu's come online. And the other platform seems to always send the interrupt to the last logical CPU (cpu-7). Recent changes had an unintended side effect of using only logical cpu-0 in the IO-APIC RTE (during boot for the legacy interrupts) and this broke the legacy interrupts not getting routed to the cpu-7 on the AMD platform, resulting in a boot hang. For now, reintroduce the removed workaround, (essentially not allowing the vector to change for legacy irq's when io-apic starts to handle the irq. Which also addressed the uninteded sife effect of just specifying cpu-0 in the IO-APIC RTE for those irq's during boot). Reported-and-tested-by: Robert Richter Reported-and-tested-by: Borislav Petkov Signed-off-by: Suresh Siddha Link: http://lkml.kernel.org/r/1344453412.29170.5.camel@sbsiddha-desk.sc.intel.com Signed-off-by: H. Peter Anvin --- arch/x86/kernel/apic/io_apic.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index a6c64aaddf9..c265593ec2c 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1356,6 +1356,16 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, if (!IO_APIC_IRQ(irq)) return; + /* + * For legacy irqs, cfg->domain starts with cpu 0. Now that IO-APIC + * can handle this irq and the apic driver is finialized at this point, + * update the cfg->domain. + */ + if (irq < legacy_pic->nr_legacy_irqs && + cpumask_equal(cfg->domain, cpumask_of(0))) + apic->vector_allocation_domain(0, cfg->domain, + apic->target_cpus()); + if (assign_irq_vector(irq, cfg, apic->target_cpus())) return; -- cgit v1.2.3-70-g09d2 From f026cfa82f628db24b8cea41b9d6202af104cecb Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 14 Aug 2012 09:53:38 -0700 Subject: Revert "x86-64/efi: Use EFI to deal with platform wall clock" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit bacef661acdb634170a8faddbc1cf28e8f8b9eee. This commit has been found to cause serious regressions on a number of ASUS machines at the least. We probably need to provide a 1:1 map in addition to the EFI virtual memory map in order for this to work. Signed-off-by: H. Peter Anvin Reported-and-bisected-by: Jérôme Carretero Cc: Jan Beulich Cc: Matt Fleming Cc: Matthew Garrett Cc: Linus Torvalds Cc: Andrew Morton Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20120805172903.5f8bb24c@zougloub.eu --- arch/x86/mm/pageattr.c | 10 ++++------ arch/x86/platform/efi/efi.c | 30 ++++++++++++++++++++++++++---- include/linux/efi.h | 2 ++ init/main.c | 8 ++++---- 4 files changed, 36 insertions(+), 14 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 931930a9616..a718e0d2350 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -919,13 +919,11 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages, /* * On success we use clflush, when the CPU supports it to - * avoid the wbindv. If the CPU does not support it, in the - * error case, and during early boot (for EFI) we fall back - * to cpa_flush_all (which uses wbinvd): + * avoid the wbindv. If the CPU does not support it and in the + * error case we fall back to cpa_flush_all (which uses + * wbindv): */ - if (early_boot_irqs_disabled) - __cpa_flush_all((void *)(long)cache); - else if (!ret && cpu_has_clflush) { + if (!ret && cpu_has_clflush) { if (cpa.flags & (CPA_PAGES_ARRAY | CPA_ARRAY)) { cpa_flush_array(addr, numpages, cache, cpa.flags, pages); diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 2dc29f51e75..92660edaa1e 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -234,7 +234,22 @@ static efi_status_t __init phys_efi_set_virtual_address_map( return status; } -static int efi_set_rtc_mmss(unsigned long nowtime) +static efi_status_t __init phys_efi_get_time(efi_time_t *tm, + efi_time_cap_t *tc) +{ + unsigned long flags; + efi_status_t status; + + spin_lock_irqsave(&rtc_lock, flags); + efi_call_phys_prelog(); + status = efi_call_phys2(efi_phys.get_time, virt_to_phys(tm), + virt_to_phys(tc)); + efi_call_phys_epilog(); + spin_unlock_irqrestore(&rtc_lock, flags); + return status; +} + +int efi_set_rtc_mmss(unsigned long nowtime) { int real_seconds, real_minutes; efi_status_t status; @@ -263,7 +278,7 @@ static int efi_set_rtc_mmss(unsigned long nowtime) return 0; } -static unsigned long efi_get_time(void) +unsigned long efi_get_time(void) { efi_status_t status; efi_time_t eft; @@ -606,13 +621,18 @@ static int __init efi_runtime_init(void) } /* * We will only need *early* access to the following - * EFI runtime service before set_virtual_address_map + * two EFI runtime services before set_virtual_address_map * is invoked. */ + efi_phys.get_time = (efi_get_time_t *)runtime->get_time; efi_phys.set_virtual_address_map = (efi_set_virtual_address_map_t *) runtime->set_virtual_address_map; - + /* + * Make efi_get_time can be called before entering + * virtual mode. + */ + efi.get_time = phys_efi_get_time; early_iounmap(runtime, sizeof(efi_runtime_services_t)); return 0; @@ -700,10 +720,12 @@ void __init efi_init(void) efi_enabled = 0; return; } +#ifdef CONFIG_X86_32 if (efi_native) { x86_platform.get_wallclock = efi_get_time; x86_platform.set_wallclock = efi_set_rtc_mmss; } +#endif #if EFI_DEBUG print_efi_memmap(); diff --git a/include/linux/efi.h b/include/linux/efi.h index 103adc6d7e3..ec45ccd8708 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -503,6 +503,8 @@ extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size); extern int __init efi_uart_console_only (void); extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); +extern unsigned long efi_get_time(void); +extern int efi_set_rtc_mmss(unsigned long nowtime); extern void efi_reserve_boot_services(void); extern struct efi_memory_map memmap; diff --git a/init/main.c b/init/main.c index e60679de61c..b28673087ac 100644 --- a/init/main.c +++ b/init/main.c @@ -461,10 +461,6 @@ static void __init mm_init(void) percpu_init_late(); pgtable_cache_init(); vmalloc_init(); -#ifdef CONFIG_X86 - if (efi_enabled) - efi_enter_virtual_mode(); -#endif } asmlinkage void __init start_kernel(void) @@ -606,6 +602,10 @@ asmlinkage void __init start_kernel(void) calibrate_delay(); pidmap_init(); anon_vma_init(); +#ifdef CONFIG_X86 + if (efi_enabled) + efi_enter_virtual_mode(); +#endif thread_info_cache_init(); cred_init(); fork_init(totalram_pages); -- cgit v1.2.3-70-g09d2 From 47be03a28cc6c80e3aa2b3e8ed6d960ff0c5c0af Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:37 +0000 Subject: netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet Cc: "David S. Miller" Reported-by: Dan Carpenter Signed-off-by: Eric Dumazet Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 6 +++--- drivers/net/team/team.c | 16 +++++++++------- include/linux/netdevice.h | 3 ++- include/linux/netpoll.h | 2 +- net/8021q/vlan_dev.c | 7 ++++--- net/bridge/br_device.c | 12 ++++++------ net/bridge/br_if.c | 2 +- net/bridge/br_private.h | 4 ++-- net/core/netpoll.c | 8 ++++---- 9 files changed, 32 insertions(+), 28 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 6fae5f3ec7f..8697136e27c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1235,12 +1235,12 @@ static inline int slave_enable_netpoll(struct slave *slave) struct netpoll *np; int err = 0; - np = kzalloc(sizeof(*np), GFP_KERNEL); + np = kzalloc(sizeof(*np), GFP_ATOMIC); err = -ENOMEM; if (!np) goto out; - err = __netpoll_setup(np, slave->dev); + err = __netpoll_setup(np, slave->dev, GFP_ATOMIC); if (err) { kfree(np); goto out; @@ -1292,7 +1292,7 @@ static void bond_netpoll_cleanup(struct net_device *bond_dev) read_unlock(&bond->lock); } -static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni) +static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni, gfp_t gfp) { struct bonding *bond = netdev_priv(dev); struct slave *slave; diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 87707ab3943..341b65dbbcd 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -795,16 +795,17 @@ static void team_port_leave(struct team *team, struct team_port *port) } #ifdef CONFIG_NET_POLL_CONTROLLER -static int team_port_enable_netpoll(struct team *team, struct team_port *port) +static int team_port_enable_netpoll(struct team *team, struct team_port *port, + gfp_t gfp) { struct netpoll *np; int err; - np = kzalloc(sizeof(*np), GFP_KERNEL); + np = kzalloc(sizeof(*np), gfp); if (!np) return -ENOMEM; - err = __netpoll_setup(np, port->dev); + err = __netpoll_setup(np, port->dev, gfp); if (err) { kfree(np); return err; @@ -833,7 +834,8 @@ static struct netpoll_info *team_netpoll_info(struct team *team) } #else -static int team_port_enable_netpoll(struct team *team, struct team_port *port) +static int team_port_enable_netpoll(struct team *team, struct team_port *port, + gfp_t gfp) { return 0; } @@ -913,7 +915,7 @@ static int team_port_add(struct team *team, struct net_device *port_dev) } if (team_netpoll_info(team)) { - err = team_port_enable_netpoll(team, port); + err = team_port_enable_netpoll(team, port, GFP_KERNEL); if (err) { netdev_err(dev, "Failed to enable netpoll on device %s\n", portname); @@ -1443,7 +1445,7 @@ static void team_netpoll_cleanup(struct net_device *dev) } static int team_netpoll_setup(struct net_device *dev, - struct netpoll_info *npifo) + struct netpoll_info *npifo, gfp_t gfp) { struct team *team = netdev_priv(dev); struct team_port *port; @@ -1451,7 +1453,7 @@ static int team_netpoll_setup(struct net_device *dev, mutex_lock(&team->lock); list_for_each_entry(port, &team->port_list, list) { - err = team_port_enable_netpoll(team, port); + err = team_port_enable_netpoll(team, port, gfp); if (err) { __team_netpoll_cleanup(team); break; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a9db4f33407..3560d688161 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -953,7 +953,8 @@ struct net_device_ops { #ifdef CONFIG_NET_POLL_CONTROLLER void (*ndo_poll_controller)(struct net_device *dev); int (*ndo_netpoll_setup)(struct net_device *dev, - struct netpoll_info *info); + struct netpoll_info *info, + gfp_t gfp); void (*ndo_netpoll_cleanup)(struct net_device *dev); #endif int (*ndo_set_vf_mac)(struct net_device *dev, diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 28f5389c924..bf2d51eec0f 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -43,7 +43,7 @@ struct netpoll_info { void netpoll_send_udp(struct netpoll *np, const char *msg, int len); void netpoll_print_options(struct netpoll *np); int netpoll_parse_options(struct netpoll *np, char *opt); -int __netpoll_setup(struct netpoll *np, struct net_device *ndev); +int __netpoll_setup(struct netpoll *np, struct net_device *ndev, gfp_t gfp); int netpoll_setup(struct netpoll *np); int netpoll_trap(void); void netpoll_set_trap(int trap); diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 73a2a83ee2d..ee4ae0944ce 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -669,19 +669,20 @@ static void vlan_dev_poll_controller(struct net_device *dev) return; } -static int vlan_dev_netpoll_setup(struct net_device *dev, struct netpoll_info *npinfo) +static int vlan_dev_netpoll_setup(struct net_device *dev, struct netpoll_info *npinfo, + gfp_t gfp) { struct vlan_dev_priv *info = vlan_dev_priv(dev); struct net_device *real_dev = info->real_dev; struct netpoll *netpoll; int err = 0; - netpoll = kzalloc(sizeof(*netpoll), GFP_KERNEL); + netpoll = kzalloc(sizeof(*netpoll), gfp); err = -ENOMEM; if (!netpoll) goto out; - err = __netpoll_setup(netpoll, real_dev); + err = __netpoll_setup(netpoll, real_dev, gfp); if (err) { kfree(netpoll); goto out; diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index 33348453760..ed0e0f9dc78 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -213,7 +213,8 @@ static void br_netpoll_cleanup(struct net_device *dev) } } -static int br_netpoll_setup(struct net_device *dev, struct netpoll_info *ni) +static int br_netpoll_setup(struct net_device *dev, struct netpoll_info *ni, + gfp_t gfp) { struct net_bridge *br = netdev_priv(dev); struct net_bridge_port *p, *n; @@ -222,8 +223,7 @@ static int br_netpoll_setup(struct net_device *dev, struct netpoll_info *ni) list_for_each_entry_safe(p, n, &br->port_list, list) { if (!p->dev) continue; - - err = br_netpoll_enable(p); + err = br_netpoll_enable(p, gfp); if (err) goto fail; } @@ -236,17 +236,17 @@ fail: goto out; } -int br_netpoll_enable(struct net_bridge_port *p) +int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp) { struct netpoll *np; int err = 0; - np = kzalloc(sizeof(*p->np), GFP_KERNEL); + np = kzalloc(sizeof(*p->np), gfp); err = -ENOMEM; if (!np) goto out; - err = __netpoll_setup(np, p->dev); + err = __netpoll_setup(np, p->dev, gfp); if (err) { kfree(np); goto out; diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index e1144e1617b..171fd6b9bfe 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -361,7 +361,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) if (err) goto err2; - if (br_netpoll_info(br) && ((err = br_netpoll_enable(p)))) + if (br_netpoll_info(br) && ((err = br_netpoll_enable(p, GFP_KERNEL)))) goto err3; err = netdev_set_master(dev, br->dev); diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index a768b2408ed..f507d2af964 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -316,7 +316,7 @@ static inline void br_netpoll_send_skb(const struct net_bridge_port *p, netpoll_send_skb(np, skb); } -extern int br_netpoll_enable(struct net_bridge_port *p); +extern int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp); extern void br_netpoll_disable(struct net_bridge_port *p); #else static inline struct netpoll_info *br_netpoll_info(struct net_bridge *br) @@ -329,7 +329,7 @@ static inline void br_netpoll_send_skb(const struct net_bridge_port *p, { } -static inline int br_netpoll_enable(struct net_bridge_port *p) +static inline int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp) { return 0; } diff --git a/net/core/netpoll.c b/net/core/netpoll.c index b4c90e42b44..37cc854774a 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -715,7 +715,7 @@ int netpoll_parse_options(struct netpoll *np, char *opt) } EXPORT_SYMBOL(netpoll_parse_options); -int __netpoll_setup(struct netpoll *np, struct net_device *ndev) +int __netpoll_setup(struct netpoll *np, struct net_device *ndev, gfp_t gfp) { struct netpoll_info *npinfo; const struct net_device_ops *ops; @@ -734,7 +734,7 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev) } if (!ndev->npinfo) { - npinfo = kmalloc(sizeof(*npinfo), GFP_KERNEL); + npinfo = kmalloc(sizeof(*npinfo), gfp); if (!npinfo) { err = -ENOMEM; goto out; @@ -752,7 +752,7 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev) ops = np->dev->netdev_ops; if (ops->ndo_netpoll_setup) { - err = ops->ndo_netpoll_setup(ndev, npinfo); + err = ops->ndo_netpoll_setup(ndev, npinfo, gfp); if (err) goto free_npinfo; } @@ -857,7 +857,7 @@ int netpoll_setup(struct netpoll *np) refill_skbs(); rtnl_lock(); - err = __netpoll_setup(np, ndev); + err = __netpoll_setup(np, ndev, GFP_KERNEL); rtnl_unlock(); if (err) -- cgit v1.2.3-70-g09d2 From 38e6bc185d9544dfad1774b3f8902a0b061aea25 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:38 +0000 Subject: netpoll: make __netpoll_cleanup non-block Like the previous patch, slave_disable_netpoll() and __netpoll_cleanup() may be called with read_lock() held too, so we should make them non-block, by moving the cleanup and kfree() to call_rcu_bh() callbacks. Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 4 +--- include/linux/netpoll.h | 3 +++ net/8021q/vlan_dev.c | 6 +----- net/bridge/br_device.c | 6 +----- net/core/netpoll.c | 42 +++++++++++++++++++++++++++++++---------- 5 files changed, 38 insertions(+), 23 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 8697136e27c..e42891683e3 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1257,9 +1257,7 @@ static inline void slave_disable_netpoll(struct slave *slave) return; slave->np = NULL; - synchronize_rcu_bh(); - __netpoll_cleanup(np); - kfree(np); + __netpoll_free_rcu(np); } static inline bool slave_dev_support_netpoll(struct net_device *slave_dev) { diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index bf2d51eec0f..907812efb4d 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -23,6 +23,7 @@ struct netpoll { u8 remote_mac[ETH_ALEN]; struct list_head rx; /* rx_np list element */ + struct rcu_head rcu; }; struct netpoll_info { @@ -38,6 +39,7 @@ struct netpoll_info { struct delayed_work tx_work; struct netpoll *netpoll; + struct rcu_head rcu; }; void netpoll_send_udp(struct netpoll *np, const char *msg, int len); @@ -48,6 +50,7 @@ int netpoll_setup(struct netpoll *np); int netpoll_trap(void); void netpoll_set_trap(int trap); void __netpoll_cleanup(struct netpoll *np); +void __netpoll_free_rcu(struct netpoll *np); void netpoll_cleanup(struct netpoll *np); int __netpoll_rx(struct sk_buff *skb); void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index ee4ae0944ce..b65623f9066 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -704,11 +704,7 @@ static void vlan_dev_netpoll_cleanup(struct net_device *dev) info->netpoll = NULL; - /* Wait for transmitting packets to finish before freeing. */ - synchronize_rcu_bh(); - - __netpoll_cleanup(netpoll); - kfree(netpoll); + __netpoll_free_rcu(netpoll); } #endif /* CONFIG_NET_POLL_CONTROLLER */ diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index ed0e0f9dc78..f41ba4048c9 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -267,11 +267,7 @@ void br_netpoll_disable(struct net_bridge_port *p) p->np = NULL; - /* Wait for transmitting packets to finish before freeing. */ - synchronize_rcu_bh(); - - __netpoll_cleanup(np); - kfree(np); + __netpoll_free_rcu(np); } #endif diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 37cc854774a..dc17f1db147 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -878,6 +878,24 @@ static int __init netpoll_init(void) } core_initcall(netpoll_init); +static void rcu_cleanup_netpoll_info(struct rcu_head *rcu_head) +{ + struct netpoll_info *npinfo = + container_of(rcu_head, struct netpoll_info, rcu); + + skb_queue_purge(&npinfo->arp_tx); + skb_queue_purge(&npinfo->txq); + + /* we can't call cancel_delayed_work_sync here, as we are in softirq */ + cancel_delayed_work(&npinfo->tx_work); + + /* clean after last, unfinished work */ + __skb_queue_purge(&npinfo->txq); + /* now cancel it again */ + cancel_delayed_work(&npinfo->tx_work); + kfree(npinfo); +} + void __netpoll_cleanup(struct netpoll *np) { struct netpoll_info *npinfo; @@ -903,20 +921,24 @@ void __netpoll_cleanup(struct netpoll *np) ops->ndo_netpoll_cleanup(np->dev); RCU_INIT_POINTER(np->dev->npinfo, NULL); + call_rcu_bh(&npinfo->rcu, rcu_cleanup_netpoll_info); + } +} +EXPORT_SYMBOL_GPL(__netpoll_cleanup); - /* avoid racing with NAPI reading npinfo */ - synchronize_rcu_bh(); +static void rcu_cleanup_netpoll(struct rcu_head *rcu_head) +{ + struct netpoll *np = container_of(rcu_head, struct netpoll, rcu); - skb_queue_purge(&npinfo->arp_tx); - skb_queue_purge(&npinfo->txq); - cancel_delayed_work_sync(&npinfo->tx_work); + __netpoll_cleanup(np); + kfree(np); +} - /* clean after last, unfinished work */ - __skb_queue_purge(&npinfo->txq); - kfree(npinfo); - } +void __netpoll_free_rcu(struct netpoll *np) +{ + call_rcu_bh(&np->rcu, rcu_cleanup_netpoll); } -EXPORT_SYMBOL_GPL(__netpoll_cleanup); +EXPORT_SYMBOL_GPL(__netpoll_free_rcu); void netpoll_cleanup(struct netpoll *np) { -- cgit v1.2.3-70-g09d2 From 3335f0ca130c201f8680e97f63612053fbc16e22 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:39 +0000 Subject: netconsole: do not release spin_lock when calling __netpoll_cleanup With the previous patch applied, __netpoll_cleanup() is non-block now, so we don't need to release the spin_lock before calling it. Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/netconsole.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index f9347ea3d38..f0ad56c1393 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -640,12 +640,7 @@ static int netconsole_netdev_event(struct notifier_block *this, * rtnl_lock already held */ if (nt->np.dev) { - spin_unlock_irqrestore( - &target_list_lock, - flags); __netpoll_cleanup(&nt->np); - spin_lock_irqsave(&target_list_lock, - flags); dev_put(nt->np.dev); nt->np.dev = NULL; netconsole_target_put(nt); -- cgit v1.2.3-70-g09d2 From 57c5d46191e75312934c00eba65b13a31ca95120 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:40 +0000 Subject: netpoll: take rcu_read_lock_bh() in netpoll_rx() In __netpoll_rx(), it dereferences ->npinfo without rcu_dereference_bh(), this patch fixes it by using the 'npinfo' passed from netpoll_rx() where it is already dereferenced with rcu_dereference_bh(). Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- include/linux/netpoll.h | 4 ++-- net/core/netpoll.c | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 907812efb4d..5d881c38827 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -52,7 +52,7 @@ void netpoll_set_trap(int trap); void __netpoll_cleanup(struct netpoll *np); void __netpoll_free_rcu(struct netpoll *np); void netpoll_cleanup(struct netpoll *np); -int __netpoll_rx(struct sk_buff *skb); +int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo); void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, struct net_device *dev); static inline void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb) @@ -77,7 +77,7 @@ static inline bool netpoll_rx(struct sk_buff *skb) spin_lock(&npinfo->rx_lock); /* check rx_flags again with the lock held */ - if (npinfo->rx_flags && __netpoll_rx(skb)) + if (npinfo->rx_flags && __netpoll_rx(skb, npinfo)) ret = true; spin_unlock(&npinfo->rx_lock); diff --git a/net/core/netpoll.c b/net/core/netpoll.c index dc17f1db147..d055bb01328 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -543,13 +543,12 @@ static void arp_reply(struct sk_buff *skb) spin_unlock_irqrestore(&npinfo->rx_lock, flags); } -int __netpoll_rx(struct sk_buff *skb) +int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo) { int proto, len, ulen; int hits = 0; const struct iphdr *iph; struct udphdr *uh; - struct netpoll_info *npinfo = skb->dev->npinfo; struct netpoll *np, *tmp; if (list_empty(&npinfo->rx_np)) -- cgit v1.2.3-70-g09d2 From 91fe4a4b9e490a24f6702dd8afe72d8afab6fcdb Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:41 +0000 Subject: netpoll: use netpoll_rx_on() in netpoll_rx() The logic of the code is same, just call netpoll_rx_on(). Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- include/linux/netpoll.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 5d881c38827..2d178baa49d 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -63,6 +63,13 @@ static inline void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb) #ifdef CONFIG_NETPOLL +static inline int netpoll_rx_on(struct sk_buff *skb) +{ + struct netpoll_info *npinfo = rcu_dereference_bh(skb->dev->npinfo); + + return npinfo && (!list_empty(&npinfo->rx_np) || npinfo->rx_flags); +} + static inline bool netpoll_rx(struct sk_buff *skb) { struct netpoll_info *npinfo; @@ -70,11 +77,11 @@ static inline bool netpoll_rx(struct sk_buff *skb) bool ret = false; local_irq_save(flags); - npinfo = rcu_dereference_bh(skb->dev->npinfo); - if (!npinfo || (list_empty(&npinfo->rx_np) && !npinfo->rx_flags)) + if (!netpoll_rx_on(skb)) goto out; + npinfo = rcu_dereference_bh(skb->dev->npinfo); spin_lock(&npinfo->rx_lock); /* check rx_flags again with the lock held */ if (npinfo->rx_flags && __netpoll_rx(skb, npinfo)) @@ -86,13 +93,6 @@ out: return ret; } -static inline int netpoll_rx_on(struct sk_buff *skb) -{ - struct netpoll_info *npinfo = rcu_dereference_bh(skb->dev->npinfo); - - return npinfo && (!list_empty(&npinfo->rx_np) || npinfo->rx_flags); -} - static inline int netpoll_receive_skb(struct sk_buff *skb) { if (!list_empty(&skb->dev->napi_list)) -- cgit v1.2.3-70-g09d2 From 2899656b494dcd118123af1126826b115c8ea6f9 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:42 +0000 Subject: netpoll: take rcu_read_lock_bh() in netpoll_send_skb_on_dev() This patch fixes several problems in the call path of netpoll_send_skb_on_dev(): 1. Disable IRQ's before calling netpoll_send_skb_on_dev(). 2. All the callees of netpoll_send_skb_on_dev() should use rcu_dereference_bh() to dereference ->npinfo. 3. Rename arp_reply() to netpoll_arp_reply(), the former is too generic. Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- include/linux/netpoll.h | 3 +++ net/core/netpoll.c | 31 +++++++++++++++++-------------- 2 files changed, 20 insertions(+), 14 deletions(-) diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 2d178baa49d..61aee86cf21 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -57,7 +57,10 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, struct net_device *dev); static inline void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb) { + unsigned long flags; + local_irq_save(flags); netpoll_send_skb_on_dev(np, skb, np->dev); + local_irq_restore(flags); } diff --git a/net/core/netpoll.c b/net/core/netpoll.c index d055bb01328..174346ac15a 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -54,7 +54,7 @@ static atomic_t trapped; MAX_UDP_CHUNK) static void zap_completion_queue(void); -static void arp_reply(struct sk_buff *skb); +static void netpoll_arp_reply(struct sk_buff *skb, struct netpoll_info *npinfo); static unsigned int carrier_timeout = 4; module_param(carrier_timeout, uint, 0644); @@ -170,7 +170,8 @@ static void poll_napi(struct net_device *dev) list_for_each_entry(napi, &dev->napi_list, dev_list) { if (napi->poll_owner != smp_processor_id() && spin_trylock(&napi->poll_lock)) { - budget = poll_one_napi(dev->npinfo, napi, budget); + budget = poll_one_napi(rcu_dereference_bh(dev->npinfo), + napi, budget); spin_unlock(&napi->poll_lock); if (!budget) @@ -185,13 +186,14 @@ static void service_arp_queue(struct netpoll_info *npi) struct sk_buff *skb; while ((skb = skb_dequeue(&npi->arp_tx))) - arp_reply(skb); + netpoll_arp_reply(skb, npi); } } static void netpoll_poll_dev(struct net_device *dev) { const struct net_device_ops *ops; + struct netpoll_info *ni = rcu_dereference_bh(dev->npinfo); if (!dev || !netif_running(dev)) return; @@ -206,17 +208,18 @@ static void netpoll_poll_dev(struct net_device *dev) poll_napi(dev); if (dev->flags & IFF_SLAVE) { - if (dev->npinfo) { + if (ni) { struct net_device *bond_dev = dev->master; struct sk_buff *skb; - while ((skb = skb_dequeue(&dev->npinfo->arp_tx))) { + struct netpoll_info *bond_ni = rcu_dereference_bh(bond_dev->npinfo); + while ((skb = skb_dequeue(&ni->arp_tx))) { skb->dev = bond_dev; - skb_queue_tail(&bond_dev->npinfo->arp_tx, skb); + skb_queue_tail(&bond_ni->arp_tx, skb); } } } - service_arp_queue(dev->npinfo); + service_arp_queue(ni); zap_completion_queue(); } @@ -302,6 +305,7 @@ static int netpoll_owner_active(struct net_device *dev) return 0; } +/* call with IRQ disabled */ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, struct net_device *dev) { @@ -309,8 +313,11 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, unsigned long tries; const struct net_device_ops *ops = dev->netdev_ops; /* It is up to the caller to keep npinfo alive. */ - struct netpoll_info *npinfo = np->dev->npinfo; + struct netpoll_info *npinfo; + + WARN_ON_ONCE(!irqs_disabled()); + npinfo = rcu_dereference_bh(np->dev->npinfo); if (!npinfo || !netif_running(dev) || !netif_device_present(dev)) { __kfree_skb(skb); return; @@ -319,11 +326,9 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, /* don't get messages out of order, and no recursion */ if (skb_queue_len(&npinfo->txq) == 0 && !netpoll_owner_active(dev)) { struct netdev_queue *txq; - unsigned long flags; txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb)); - local_irq_save(flags); /* try until next clock tick */ for (tries = jiffies_to_usecs(1)/USEC_PER_POLL; tries > 0; --tries) { @@ -347,10 +352,9 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, } WARN_ONCE(!irqs_disabled(), - "netpoll_send_skb(): %s enabled interrupts in poll (%pF)\n", + "netpoll_send_skb_on_dev(): %s enabled interrupts in poll (%pF)\n", dev->name, ops->ndo_start_xmit); - local_irq_restore(flags); } if (status != NETDEV_TX_OK) { @@ -423,9 +427,8 @@ void netpoll_send_udp(struct netpoll *np, const char *msg, int len) } EXPORT_SYMBOL(netpoll_send_udp); -static void arp_reply(struct sk_buff *skb) +static void netpoll_arp_reply(struct sk_buff *skb, struct netpoll_info *npinfo) { - struct netpoll_info *npinfo = skb->dev->npinfo; struct arphdr *arp; unsigned char *arp_ptr; int size, type = ARPOP_REPLY, ptype = ETH_P_ARP; -- cgit v1.2.3-70-g09d2 From d30362c0712eb567334b3b66de7c40d4372f2c6f Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:43 +0000 Subject: bridge: add some comments for NETDEV_RELEASE Add comments on why we don't notify NETDEV_RELEASE. Cc: David Miller Cc: Stephen Hemminger Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/bridge/br_if.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 171fd6b9bfe..1c8fdc3558c 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -427,6 +427,10 @@ int br_del_if(struct net_bridge *br, struct net_device *dev) if (!p || p->br != br) return -EINVAL; + /* Since more than one interface can be attached to a bridge, + * there still maybe an alternate path for netconsole to use; + * therefore there is no reason for a NETDEV_RELEASE event. + */ del_nbp(p); spin_lock_bh(&br->lock); -- cgit v1.2.3-70-g09d2 From 4e3828c4bfd90b00a951cad7c8da27d1966beefe Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:44 +0000 Subject: bridge: use list_for_each_entry() in netpoll functions We don't delete 'p' from the list in the loop, so we can just use list_for_each_entry(). Cc: David Miller Cc: Stephen Hemminger Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/bridge/br_device.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index f41ba4048c9..32211fa5b50 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -206,21 +206,20 @@ static void br_poll_controller(struct net_device *br_dev) static void br_netpoll_cleanup(struct net_device *dev) { struct net_bridge *br = netdev_priv(dev); - struct net_bridge_port *p, *n; + struct net_bridge_port *p; - list_for_each_entry_safe(p, n, &br->port_list, list) { + list_for_each_entry(p, &br->port_list, list) br_netpoll_disable(p); - } } static int br_netpoll_setup(struct net_device *dev, struct netpoll_info *ni, gfp_t gfp) { struct net_bridge *br = netdev_priv(dev); - struct net_bridge_port *p, *n; + struct net_bridge_port *p; int err = 0; - list_for_each_entry_safe(p, n, &br->port_list, list) { + list_for_each_entry(p, &br->port_list, list) { if (!p->dev) continue; err = br_netpoll_enable(p, gfp); -- cgit v1.2.3-70-g09d2 From e15c3c2294605f09f9b336b2f3b97086ab4b8145 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:45 +0000 Subject: netpoll: check netpoll tx status on the right device Although this doesn't matter actually, because netpoll_tx_running() doesn't use the parameter, the code will be more readable. For team_dev_queue_xmit() we have to move it down to avoid compile errors. Cc: David Miller Signed-off-by: Jiri Pirko Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- include/linux/if_team.h | 30 +++++++++++++++--------------- net/bridge/br_forward.c | 2 +- 3 files changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index e42891683e3..d688a8af432 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -398,7 +398,7 @@ int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping; - if (unlikely(netpoll_tx_running(slave_dev))) + if (unlikely(netpoll_tx_running(bond->dev))) bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb); else dev_queue_xmit(skb); diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 6960fc1841a..aa2e167e1ef 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -96,21 +96,6 @@ static inline void team_netpoll_send_skb(struct team_port *port, } #endif -static inline int team_dev_queue_xmit(struct team *team, struct team_port *port, - struct sk_buff *skb) -{ - BUILD_BUG_ON(sizeof(skb->queue_mapping) != - sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); - skb_set_queue_mapping(skb, qdisc_skb_cb(skb)->slave_dev_queue_mapping); - - skb->dev = port->dev; - if (unlikely(netpoll_tx_running(port->dev))) { - team_netpoll_send_skb(port, skb); - return 0; - } - return dev_queue_xmit(skb); -} - struct team_mode_ops { int (*init)(struct team *team); void (*exit)(struct team *team); @@ -200,6 +185,21 @@ struct team { long mode_priv[TEAM_MODE_PRIV_LONGS]; }; +static inline int team_dev_queue_xmit(struct team *team, struct team_port *port, + struct sk_buff *skb) +{ + BUILD_BUG_ON(sizeof(skb->queue_mapping) != + sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); + skb_set_queue_mapping(skb, qdisc_skb_cb(skb)->slave_dev_queue_mapping); + + skb->dev = port->dev; + if (unlikely(netpoll_tx_running(team->dev))) { + team_netpoll_send_skb(port, skb); + return 0; + } + return dev_queue_xmit(skb); +} + static inline struct hlist_head *team_port_index_hash(struct team *team, int port_index) { diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index e9466d41270..02015a505d2 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -65,7 +65,7 @@ static void __br_deliver(const struct net_bridge_port *to, struct sk_buff *skb) { skb->dev = to->dev; - if (unlikely(netpoll_tx_running(to->dev))) { + if (unlikely(netpoll_tx_running(to->br->dev))) { if (packet_length(skb) > skb->dev->mtu && !skb_is_gso(skb)) kfree_skb(skb); else { -- cgit v1.2.3-70-g09d2 From 77ab8a54d9a8dcc4a46484a04133314f33f2aba6 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:46 +0000 Subject: netpoll: convert several functions to bool These functions are just boolean, let them return bool instead of int. Cc: David Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- include/linux/netpoll.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 61aee86cf21..66d5379c305 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -66,7 +66,7 @@ static inline void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb) #ifdef CONFIG_NETPOLL -static inline int netpoll_rx_on(struct sk_buff *skb) +static inline bool netpoll_rx_on(struct sk_buff *skb) { struct netpoll_info *npinfo = rcu_dereference_bh(skb->dev->npinfo); @@ -125,7 +125,7 @@ static inline void netpoll_poll_unlock(void *have) } } -static inline int netpoll_tx_running(struct net_device *dev) +static inline bool netpoll_tx_running(struct net_device *dev) { return irqs_disabled(); } @@ -133,11 +133,11 @@ static inline int netpoll_tx_running(struct net_device *dev) #else static inline bool netpoll_rx(struct sk_buff *skb) { - return 0; + return false; } -static inline int netpoll_rx_on(struct sk_buff *skb) +static inline bool netpoll_rx_on(struct sk_buff *skb) { - return 0; + return false; } static inline int netpoll_receive_skb(struct sk_buff *skb) { @@ -153,9 +153,9 @@ static inline void netpoll_poll_unlock(void *have) static inline void netpoll_netdev_init(struct net_device *dev) { } -static inline int netpoll_tx_running(struct net_device *dev) +static inline bool netpoll_tx_running(struct net_device *dev) { - return 0; + return false; } #endif -- cgit v1.2.3-70-g09d2 From f3da38932b46d1bf171634cc7aae3da405eaf7a6 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:47 +0000 Subject: vlan: clean up some variable names To be consistent, s/info/vlan/. Cc: Benjamin LaHaise Cc: Patrick McHardy Cc: David Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/8021q/vlan_dev.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index b65623f9066..0347d48aa7c 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -672,8 +672,8 @@ static void vlan_dev_poll_controller(struct net_device *dev) static int vlan_dev_netpoll_setup(struct net_device *dev, struct netpoll_info *npinfo, gfp_t gfp) { - struct vlan_dev_priv *info = vlan_dev_priv(dev); - struct net_device *real_dev = info->real_dev; + struct vlan_dev_priv *vlan = vlan_dev_priv(dev); + struct net_device *real_dev = vlan->real_dev; struct netpoll *netpoll; int err = 0; @@ -688,7 +688,7 @@ static int vlan_dev_netpoll_setup(struct net_device *dev, struct netpoll_info *n goto out; } - info->netpoll = netpoll; + vlan->netpoll = netpoll; out: return err; @@ -696,13 +696,13 @@ out: static void vlan_dev_netpoll_cleanup(struct net_device *dev) { - struct vlan_dev_priv *info = vlan_dev_priv(dev); - struct netpoll *netpoll = info->netpoll; + struct vlan_dev_priv *vlan= vlan_dev_priv(dev); + struct netpoll *netpoll = vlan->netpoll; if (!netpoll) return; - info->netpoll = NULL; + vlan->netpoll = NULL; __netpoll_free_rcu(netpoll); } -- cgit v1.2.3-70-g09d2 From 6eacf8ad8d01c49b95b994b0bf379db2b5b29460 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:48 +0000 Subject: vlan: clean up vlan_dev_hard_start_xmit() Clean up vlan_dev_hard_start_xmit() function. Cc: Benjamin LaHaise Cc: Patrick McHardy Cc: David Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/8021q/vlan_dev.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 0347d48aa7c..402442402af 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -137,9 +137,21 @@ static int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev, return rc; } +static inline netdev_tx_t vlan_netpoll_send_skb(struct vlan_dev_priv *vlan, struct sk_buff *skb) +{ +#ifdef CONFIG_NET_POLL_CONTROLLER + if (vlan->netpoll) + netpoll_send_skb(vlan->netpoll, skb); +#else + BUG(); +#endif + return NETDEV_TX_OK; +} + static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { + struct vlan_dev_priv *vlan = vlan_dev_priv(dev); struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data); unsigned int len; int ret; @@ -150,29 +162,30 @@ static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb, * OTHER THINGS LIKE FDDI/TokenRing/802.3 SNAPs... */ if (veth->h_vlan_proto != htons(ETH_P_8021Q) || - vlan_dev_priv(dev)->flags & VLAN_FLAG_REORDER_HDR) { + vlan->flags & VLAN_FLAG_REORDER_HDR) { u16 vlan_tci; - vlan_tci = vlan_dev_priv(dev)->vlan_id; + vlan_tci = vlan->vlan_id; vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb); skb = __vlan_hwaccel_put_tag(skb, vlan_tci); } - skb->dev = vlan_dev_priv(dev)->real_dev; + skb->dev = vlan->real_dev; len = skb->len; - if (netpoll_tx_running(dev)) - return skb->dev->netdev_ops->ndo_start_xmit(skb, skb->dev); + if (unlikely(netpoll_tx_running(dev))) + return vlan_netpoll_send_skb(vlan, skb); + ret = dev_queue_xmit(skb); if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) { struct vlan_pcpu_stats *stats; - stats = this_cpu_ptr(vlan_dev_priv(dev)->vlan_pcpu_stats); + stats = this_cpu_ptr(vlan->vlan_pcpu_stats); u64_stats_update_begin(&stats->syncp); stats->tx_packets++; stats->tx_bytes += len; u64_stats_update_end(&stats->syncp); } else { - this_cpu_inc(vlan_dev_priv(dev)->vlan_pcpu_stats->tx_dropped); + this_cpu_inc(vlan->vlan_pcpu_stats->tx_dropped); } return ret; -- cgit v1.2.3-70-g09d2 From 689971b44613883ee74ae9c1b31a864aaa3a8e17 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:49 +0000 Subject: netpoll: handle vlan tags in netpoll tx and rx path Without this patch, I can't get netconsole logs remotely over vlan. The reason is probably we don't handle vlan tags in either netpoll tx or rx path. I am not sure if I use these vlan functions correctly, at least this patch works. Cc: Benjamin LaHaise Cc: Patrick McHardy Cc: David Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/core/netpoll.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 174346ac15a..e4ba3e70c17 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -334,6 +335,14 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, tries > 0; --tries) { if (__netif_tx_trylock(txq)) { if (!netif_xmit_stopped(txq)) { + if (vlan_tx_tag_present(skb) && + !(netif_skb_features(skb) & NETIF_F_HW_VLAN_TX)) { + skb = __vlan_put_tag(skb, vlan_tx_tag_get(skb)); + if (unlikely(!skb)) + break; + skb->vlan_tci = 0; + } + status = ops->ndo_start_xmit(skb, dev); if (status == NETDEV_TX_OK) txq_trans_update(txq); @@ -567,6 +576,12 @@ int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo) return 1; } + if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) { + skb = vlan_untag(skb); + if (unlikely(!skb)) + goto out; + } + proto = ntohs(eth_hdr(skb)->h_proto); if (proto != ETH_P_IP) goto out; -- cgit v1.2.3-70-g09d2 From 6bdb7fe31046ac50b47e83c35cd6c6b6160a475d Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:50 +0000 Subject: netpoll: re-enable irq in poll_napi() napi->poll() needs IRQ enabled, so we have to re-enable IRQ before calling it. Cc: David Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/core/netpoll.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index e4ba3e70c17..346b1eb83a1 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -168,16 +168,24 @@ static void poll_napi(struct net_device *dev) struct napi_struct *napi; int budget = 16; + WARN_ON_ONCE(!irqs_disabled()); + list_for_each_entry(napi, &dev->napi_list, dev_list) { + local_irq_enable(); if (napi->poll_owner != smp_processor_id() && spin_trylock(&napi->poll_lock)) { + rcu_read_lock_bh(); budget = poll_one_napi(rcu_dereference_bh(dev->npinfo), napi, budget); + rcu_read_unlock_bh(); spin_unlock(&napi->poll_lock); - if (!budget) + if (!budget) { + local_irq_disable(); break; + } } + local_irq_disable(); } } -- cgit v1.2.3-70-g09d2 From 6556bfde65b1d4bea29eb2e1566398676792eaaa Mon Sep 17 00:00:00 2001 From: Dirk Gouders Date: Fri, 10 Aug 2012 01:24:51 +0000 Subject: netconsole.txt: revision of examples for the receiver of kernel messages There are at least 4 implementations of netcat with the BSD-based being the only one that has to be used without the -p switch to specify the listening port. Jan Engelhardt suggested to add an example for socat(1). Signed-off-by: Dirk Gouders Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- Documentation/networking/netconsole.txt | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/Documentation/networking/netconsole.txt b/Documentation/networking/netconsole.txt index 8d022073e3e..2e9e0ae2cd4 100644 --- a/Documentation/networking/netconsole.txt +++ b/Documentation/networking/netconsole.txt @@ -51,8 +51,23 @@ Built-in netconsole starts immediately after the TCP stack is initialized and attempts to bring up the supplied dev at the supplied address. -The remote host can run either 'netcat -u -l -p ', -'nc -l -u ' or syslogd. +The remote host has several options to receive the kernel messages, +for example: + +1) syslogd + +2) netcat + + On distributions using a BSD-based netcat version (e.g. Fedora, + openSUSE and Ubuntu) the listening port must be specified without + the -p switch: + + 'nc -u -l -p ' / 'nc -u -l ' or + 'netcat -u -l -p ' / 'netcat -u -l ' + +3) socat + + 'socat udp-recv: -' Dynamic reconfiguration: ======================== -- cgit v1.2.3-70-g09d2 From 03304bcb5ec4421c0d272d7f8d688804d82b1efd Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Sun, 12 Aug 2012 09:16:30 +0000 Subject: net: qmi_wwan: use fixed interface number matching MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 215 ++++++--------------------------------------- 1 file changed, 28 insertions(+), 187 deletions(-) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 2ea126a16d7..c6a587366a5 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -247,30 +247,12 @@ err: */ static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf) { - int rv; struct qmi_wwan_state *info = (void *)&dev->data; - /* ZTE makes devices where the interface descriptors and endpoint - * configurations of two or more interfaces are identical, even - * though the functions are completely different. If set, then - * driver_info->data is a bitmap of acceptable interface numbers - * allowing us to bind to one such interface without binding to - * all of them - */ - if (dev->driver_info->data && - !test_bit(intf->cur_altsetting->desc.bInterfaceNumber, &dev->driver_info->data)) { - dev_info(&intf->dev, "not on our whitelist - ignored"); - rv = -ENODEV; - goto err; - } - /* control and data is shared */ info->control = intf; info->data = intf; - rv = qmi_wwan_register_subdriver(dev); - -err: - return rv; + return qmi_wwan_register_subdriver(dev); } static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf) @@ -356,86 +338,23 @@ static const struct driver_info qmi_wwan_shared = { .manage_power = qmi_wwan_manage_power, }; -static const struct driver_info qmi_wwan_force_int0 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(0), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int1 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(1), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int2 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(2), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int3 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(3), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int4 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(4), /* interface whitelist bitmap */ -}; - -/* Sierra Wireless provide equally useless interface descriptors - * Devices in QMI mode can be switched between two different - * configurations: - * a) USB interface #8 is QMI/wwan - * b) USB interfaces #8, #19 and #20 are QMI/wwan - * - * Both configurations provide a number of other interfaces (serial++), - * some of which have the same endpoint configuration as we expect, so - * a whitelist or blacklist is necessary. - * - * FIXME: The below whitelist should include BIT(20). It does not - * because I cannot get it to work... - */ -static const struct driver_info qmi_wwan_sierra = { - .description = "Sierra Wireless wwan/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(8) | BIT(19), /* interface whitelist bitmap */ -}; - #define HUAWEI_VENDOR_ID 0x12D1 +/* map QMI/wwan function by a fixed interface number */ +#define QMI_FIXED_INTF(vend, prod, num) \ + USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \ + .driver_info = (unsigned long)&qmi_wwan_shared + /* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */ #define QMI_GOBI1K_DEVICE(vend, prod) \ - USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_force_int3 + QMI_FIXED_INTF(vend, prod, 3) -/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */ +/* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */ #define QMI_GOBI_DEVICE(vend, prod) \ - USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_force_int0 + QMI_FIXED_INTF(vend, prod, 0) static const struct usb_device_id products[] = { + /* 1. CDC ECM like devices match on the control interface */ { /* Huawei E392, E398 and possibly others sharing both device id and more... */ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = HUAWEI_VENDOR_ID, @@ -452,10 +371,9 @@ static const struct usb_device_id products[] = { .bInterfaceProtocol = 57, /* CDC Ethernet *control* interface */ .driver_info = (unsigned long)&qmi_wwan_info, }, - { /* Huawei E392, E398 and possibly others in "Windows mode" - * using a combined control and data interface without any CDC - * functional descriptors - */ + + /* 2. Combined interface devices matching on class+protocol */ + { /* Huawei E392, E398 and possibly others in "Windows mode" */ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = HUAWEI_VENDOR_ID, .bInterfaceClass = USB_CLASS_VENDOR_SPEC, @@ -472,98 +390,21 @@ static const struct usb_device_id products[] = { .bInterfaceProtocol = 0xff, .driver_info = (unsigned long)&qmi_wwan_shared, }, - { /* ZTE MF820D */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0167, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE MF821D */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0326, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3520-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0055, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int1, - }, - { /* ZTE (Vodafone) K3565-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0063, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3570-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1008, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3571-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1010, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3765-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x2002, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K4505-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0104, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE MF60 */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1402, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int2, - }, - { /* Sierra Wireless MC77xx in QMI mode */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x1199, - .idProduct = 0x68a2, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_sierra, - }, - /* Gobi 1000 devices */ + /* 3. Combined interface devices matching on interface number */ + {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */ + {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ + {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ + {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ + {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ + {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ + + /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ @@ -579,7 +420,7 @@ static const struct usb_device_id products[] = { {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ - /* Gobi 2000 and 3000 devices */ + /* 5. Gobi 2000 and 3000 devices */ {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ -- cgit v1.2.3-70-g09d2 From 9b469a60d68b13c288d5c3fc23de29d9d482dbe6 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Sun, 12 Aug 2012 09:16:31 +0000 Subject: net: qmi_wwan: add Sierra Wireless devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index c6a587366a5..24524b24329 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -401,8 +401,11 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */ {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ + {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ + {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ + {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ @@ -430,6 +433,8 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */ {QMI_GOBI_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */ {QMI_GOBI_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */ + {QMI_GOBI_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */ + {QMI_GOBI_DEVICE(0x1199, 0x68a9)}, /* Sierra Wireless Modem */ {QMI_GOBI_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ @@ -441,11 +446,14 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */ + {QMI_FIXED_INTF(0x1199, 0x9011, 5)}, /* alternate interface number!? */ {QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */ {QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ + {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ + { } /* END */ }; MODULE_DEVICE_TABLE(usb, products); -- cgit v1.2.3-70-g09d2 From 5ea429638fbd9f18e6837e3e83a1f517741ec43b Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Sun, 12 Aug 2012 09:16:32 +0000 Subject: net: qmi_wwan: compress device_id list using macros MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Take advantage of the matching macros to make the device id list easier to read and maintain. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 25 ++++--------------------- 1 file changed, 4 insertions(+), 21 deletions(-) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 24524b24329..aaa061b7355 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -356,38 +356,21 @@ static const struct driver_info qmi_wwan_shared = { static const struct usb_device_id products[] = { /* 1. CDC ECM like devices match on the control interface */ { /* Huawei E392, E398 and possibly others sharing both device id and more... */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 9, /* CDC Ethernet *control* interface */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9), .driver_info = (unsigned long)&qmi_wwan_info, }, { /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 57, /* CDC Ethernet *control* interface */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57), .driver_info = (unsigned long)&qmi_wwan_info, }, /* 2. Combined interface devices matching on class+protocol */ { /* Huawei E392, E398 and possibly others in "Windows mode" */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 17, + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17), .driver_info = (unsigned long)&qmi_wwan_shared, }, { /* Pantech UML290 */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x106c, - .idProduct = 0x3718, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xf0, - .bInterfaceProtocol = 0xff, + USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), .driver_info = (unsigned long)&qmi_wwan_shared, }, -- cgit v1.2.3-70-g09d2 From aefe5c0060639914cce7ed4947f2c030f615bebf Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Sun, 12 Aug 2012 09:53:38 +0000 Subject: net: sierra_net: replace whitelist with ifnumber match MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/sierra_net.c | 52 ++++++++++---------------------------------- 1 file changed, 12 insertions(+), 40 deletions(-) diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index d75d1f56bec..7be49ea60b6 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -68,15 +68,8 @@ static atomic_t iface_counter = ATOMIC_INIT(0); */ #define SIERRA_NET_USBCTL_BUF_LEN 1024 -/* list of interface numbers - used for constructing interface lists */ -struct sierra_net_iface_info { - const u32 infolen; /* number of interface numbers on list */ - const u8 *ifaceinfo; /* pointer to the array holding the numbers */ -}; - struct sierra_net_info_data { u16 rx_urb_size; - struct sierra_net_iface_info whitelist; }; /* Private data structure */ @@ -637,21 +630,6 @@ static int sierra_net_change_mtu(struct net_device *net, int new_mtu) return usbnet_change_mtu(net, new_mtu); } -static int is_whitelisted(const u8 ifnum, - const struct sierra_net_iface_info *whitelist) -{ - if (whitelist) { - const u8 *list = whitelist->ifaceinfo; - int i; - - for (i = 0; i < whitelist->infolen; i++) { - if (list[i] == ifnum) - return 1; - } - } - return 0; -} - static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap) { int result = 0; @@ -706,11 +684,6 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf) dev_dbg(&dev->udev->dev, "%s", __func__); ifacenum = intf->cur_altsetting->desc.bInterfaceNumber; - /* We only accept certain interfaces */ - if (!is_whitelisted(ifacenum, &data->whitelist)) { - dev_dbg(&dev->udev->dev, "Ignoring interface: %d", ifacenum); - return -ENODEV; - } numendpoints = intf->cur_altsetting->desc.bNumEndpoints; /* We have three endpoints, bulk in and out, and a status */ if (numendpoints != 3) { @@ -945,13 +918,8 @@ struct sk_buff *sierra_net_tx_fixup(struct usbnet *dev, struct sk_buff *skb, return NULL; } -static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 }; static const struct sierra_net_info_data sierra_net_info_data_direct_ip = { .rx_urb_size = 8 * 1024, - .whitelist = { - .infolen = ARRAY_SIZE(sierra_net_ifnum_list), - .ifaceinfo = sierra_net_ifnum_list - } }; static const struct driver_info sierra_net_info_direct_ip = { @@ -965,15 +933,19 @@ static const struct driver_info sierra_net_info_direct_ip = { .data = (unsigned long)&sierra_net_info_data_direct_ip, }; +#define DIRECT_IP_DEVICE(vend, prod) \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 7), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip}, \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 10), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip}, \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 11), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip} + static const struct usb_device_id products[] = { - {USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, + DIRECT_IP_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */ + DIRECT_IP_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */ + DIRECT_IP_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */ + DIRECT_IP_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */ {}, /* last item */ }; -- cgit v1.2.3-70-g09d2 From 7bd86cc282a458b66c41e3f6676de6656c99b8db Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Sun, 12 Aug 2012 20:09:59 +0000 Subject: ipv4: Cache local output routes Commit caacf05e5ad1abf causes big drop of UDP loop back performance. The cause of the regression is that we do not cache the local output routes. Each time we send a datagram from unconnected UDP socket, the kernel allocates a dst_entry and adds it to the rt_uncached_list. It creates lock contention on the rt_uncached_lock. Reported-by: Alex Shi Signed-off-by: Yan, Zheng Signed-off-by: David S. Miller --- net/ipv4/route.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index e4ba974f143..fd9ecb52c66 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2028,7 +2028,6 @@ struct rtable *__ip_route_output_key(struct net *net, struct flowi4 *fl4) } dev_out = net->loopback_dev; fl4->flowi4_oif = dev_out->ifindex; - res.fi = NULL; flags |= RTCF_LOCAL; goto make_route; } -- cgit v1.2.3-70-g09d2 From 4855d6f3116e891b66198838b683dce3dcf6e874 Mon Sep 17 00:00:00 2001 From: Igor Maravic Date: Sun, 12 Aug 2012 22:31:58 +0000 Subject: net: ipv6: proc: Fix error handling Fix error handling in case making of dir dev_snmp6 failes Signed-off-by: Igor Maravic Signed-off-by: David S. Miller --- net/ipv6/proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index da2e92d05c1..745a3204295 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -307,10 +307,10 @@ static int __net_init ipv6_proc_init_net(struct net *net) goto proc_dev_snmp6_fail; return 0; +proc_dev_snmp6_fail: + proc_net_remove(net, "snmp6"); proc_snmp6_fail: proc_net_remove(net, "sockstat6"); -proc_dev_snmp6_fail: - proc_net_remove(net, "dev_snmp6"); return -ENOMEM; } -- cgit v1.2.3-70-g09d2 From fa16ebed31f336e41970f3f0ea9e8279f6be2d27 Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Mon, 13 Aug 2012 14:39:49 +0000 Subject: IB/ipoib: Add missing locking when CM object is deleted Commit b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") introduced a bug where in ipoib_cm_destroy_tx() a CM object is moved between lists without any supported locking. Under a stress test, this eventually leads to list corruption and a crash. Previously when this routine was called, callers were taking the device priv lock. Currently this function is called from the RCU callback associated with neighbour deletion. Fix the race by taking the same lock we used to before. Signed-off-by: Shlomo Pongratz Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 95ecf4eadf5..24683fda8e2 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1271,12 +1271,15 @@ struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx) { struct ipoib_dev_priv *priv = netdev_priv(tx->dev); + unsigned long flags; if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { + spin_lock_irqsave(&priv->lock, flags); list_move(&tx->list, &priv->cm.reap_list); queue_work(ipoib_workqueue, &priv->cm.reap_task); ipoib_dbg(priv, "Reap connection for gid %pI6\n", tx->neigh->daddr + 4); tx->neigh = NULL; + spin_unlock_irqrestore(&priv->lock, flags); } } -- cgit v1.2.3-70-g09d2 From 6c723a68c661008adf415ee90efe5f737e928ce0 Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Mon, 13 Aug 2012 14:39:50 +0000 Subject: IB/ipoib: Fix RCU pointer dereference of wrong object Commit b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") introduced a bug where in ipoib_neigh_free() (which is called from a few errors flows in the driver), rcu_dereference() is invoked with the wrong pointer object, which results in a crash. Signed-off-by: Shlomo Pongratz Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 97920b77a5d..3e2085a3ee4 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1052,7 +1052,7 @@ void ipoib_neigh_free(struct ipoib_neigh *neigh) for (n = rcu_dereference_protected(*np, lockdep_is_held(&ntbl->rwlock)); n != NULL; - n = rcu_dereference_protected(neigh->hnext, + n = rcu_dereference_protected(*np, lockdep_is_held(&ntbl->rwlock))) { if (n == neigh) { /* found */ -- cgit v1.2.3-70-g09d2 From bb2b6d19ec8b593b66402e2895c4314955b19833 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 23 Jul 2012 16:39:29 +0000 Subject: udf: fix udf_setsize() for file data in ICB If the new size is larger than the old size and the old file data was stored in the ICB (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) and the new size still fits in the ICB, skip the call to udf_extend_file() as it does not handle this i_alloc_type value (it calls BUG()). Signed-off-by: Ian Abbott Signed-off-by: Jan Kara --- fs/udf/inode.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/udf/inode.c b/fs/udf/inode.c index fafaad795cd..aa233469b3c 100644 --- a/fs/udf/inode.c +++ b/fs/udf/inode.c @@ -1124,14 +1124,17 @@ int udf_setsize(struct inode *inode, loff_t newsize) if (err) return err; down_write(&iinfo->i_data_sem); - } else + } else { iinfo->i_lenAlloc = newsize; + goto set_size; + } } err = udf_extend_file(inode, newsize); if (err) { up_write(&iinfo->i_data_sem); return err; } +set_size: truncate_setsize(inode, newsize); up_write(&iinfo->i_data_sem); } else { -- cgit v1.2.3-70-g09d2 From dc141a402b9dc03a4188cd978a4cf149c397172c Mon Sep 17 00:00:00 2001 From: Ashish Sangwan Date: Sat, 21 Jul 2012 16:35:17 +0530 Subject: UDF: During mount free lvid_bh before rescanning with different blocksize If s_lvid_bh is not freed and set to NULL before re-scanning partition with default block size, we might end up using wrong lvid in case s_lvid_bh is not updated in udf_load_logicalvolint during rescan. Signed-off-by: Ashish Sangwan Signed-off-by: Namjae Jeon Signed-off-by: Jan Kara --- fs/udf/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/udf/super.c b/fs/udf/super.c index dcbf98722af..9f55f7981b7 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -2000,6 +2000,8 @@ static int udf_fill_super(struct super_block *sb, void *options, int silent) if (!silent) pr_notice("Rescanning with blocksize %d\n", UDF_DEFAULT_BLOCKSIZE); + brelse(sbi->s_lvid_bh); + sbi->s_lvid_bh = NULL; uopt.blocksize = UDF_DEFAULT_BLOCKSIZE; ret = udf_load_vrs(sb, &uopt, silent, &fileset); } -- cgit v1.2.3-70-g09d2 From 6ea2eea1fa930b9308a06f77fce65c38931eeb13 Mon Sep 17 00:00:00 2001 From: Jeff Liu Date: Wed, 18 Jul 2012 12:12:41 +0800 Subject: quota: Move down dqptr_sem read after initializing default warn[] type at __dquot_alloc_space(). sb->s_dqopt->dqptr_sem is used to serialize ops using pointers from inode to dquots. But for __dquot_alloc_space(), it could be safely moved down after the default warn[] array got initialized. Signed-off-by: Jie Liu Signed-off-by: Jan Kara --- fs/quota/dquot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index 36a29b753c7..c495a3055e2 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -1589,10 +1589,10 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags) goto out; } - down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); for (cnt = 0; cnt < MAXQUOTAS; cnt++) warn[cnt].w_type = QUOTA_NL_NOWARN; + down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); spin_lock(&dq_data_lock); for (cnt = 0; cnt < MAXQUOTAS; cnt++) { if (!dquots[cnt]) -- cgit v1.2.3-70-g09d2 From 48d1788493f874e5d32dccb2911a7bc91c248b4b Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Thu, 2 Aug 2012 21:36:04 -0400 Subject: reiserfs: fix deadlocks with quotas The BKL push-down for reiserfs made lock recursion a special case that needs to be handled explicitly. One of the cases that was unhandled is dropping the quota during inode eviction. Both reiserfs_evict_inode and reiserfs_write_dquot take the write lock, but when the journal lock is taken it only drops one the references. The locking rules are that the journal lock be acquired before the write lock so leaving the reference open leads to a ABBA deadlock. This patch pushes the unlock up before clear_inode and avoids the recursive locking. Another ABBA situation can occur when the write lock is dropped while reading the bitmap buffer while in the quota code. When the lock is reacquired, it will deadlock against dquot->dq_lock and dqopt->dqio_mutex in the dquot_acquire path. It's safe to retain the lock across the read and should be cached under write load. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara --- fs/reiserfs/bitmap.c | 2 -- fs/reiserfs/inode.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c index 4c0c7d163d1..a98b7740a0f 100644 --- a/fs/reiserfs/bitmap.c +++ b/fs/reiserfs/bitmap.c @@ -1334,9 +1334,7 @@ struct buffer_head *reiserfs_read_bitmap_block(struct super_block *sb, else if (bitmap == 0) block = (REISERFS_DISK_OFFSET_IN_BYTES >> sb->s_blocksize_bits) + 1; - reiserfs_write_unlock(sb); bh = sb_bread(sb, block); - reiserfs_write_lock(sb); if (bh == NULL) reiserfs_warning(sb, "sh-2029: %s: bitmap block (#%u) " "reading failed", __func__, block); diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index a6d4268fb6c..855da58db14 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -76,10 +76,10 @@ void reiserfs_evict_inode(struct inode *inode) ; } out: + reiserfs_write_unlock_once(inode->i_sb, depth); clear_inode(inode); /* note this must go after the journal_end to prevent deadlock */ dquot_drop(inode); inode->i_blocks = 0; - reiserfs_write_unlock_once(inode->i_sb, depth); return; no_delete: -- cgit v1.2.3-70-g09d2 From 6024935f5ff5f1646bce8404416318e5fd4a0c4a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Aug 2012 02:49:59 +0000 Subject: llc2: Fix silent failure of llc_station_init() llc_station_init() creates and processes an event skb with no effect other than to change the state from DOWN to UP. Allocation failure is reported, but then ignored by its caller, llc2_init(). Remove this possibility by simply initialising the state as UP. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/net/llc.h | 2 +- net/llc/llc_station.c | 19 ++----------------- 2 files changed, 3 insertions(+), 18 deletions(-) diff --git a/include/net/llc.h b/include/net/llc.h index 226c846cab0..f2d0fc57052 100644 --- a/include/net/llc.h +++ b/include/net/llc.h @@ -133,7 +133,7 @@ extern int llc_build_and_send_ui_pkt(struct llc_sap *sap, struct sk_buff *skb, extern void llc_sap_handler(struct llc_sap *sap, struct sk_buff *skb); extern void llc_conn_handler(struct llc_sap *sap, struct sk_buff *skb); -extern int llc_station_init(void); +extern void llc_station_init(void); extern void llc_station_exit(void); #ifdef CONFIG_PROC_FS diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c index 6828e39ec2e..45ddbb93c5d 100644 --- a/net/llc/llc_station.c +++ b/net/llc/llc_station.c @@ -687,12 +687,8 @@ static void llc_station_rcv(struct sk_buff *skb) llc_station_state_process(skb); } -int __init llc_station_init(void) +void __init llc_station_init(void) { - int rc = -ENOBUFS; - struct sk_buff *skb; - struct llc_station_state_ev *ev; - skb_queue_head_init(&llc_main_station.mac_pdu_q); skb_queue_head_init(&llc_main_station.ev_q.list); spin_lock_init(&llc_main_station.ev_q.lock); @@ -700,20 +696,9 @@ int __init llc_station_init(void) (unsigned long)&llc_main_station); llc_main_station.ack_timer.expires = jiffies + sysctl_llc_station_ack_timeout; - skb = alloc_skb(0, GFP_ATOMIC); - if (!skb) - goto out; - rc = 0; llc_set_station_handler(llc_station_rcv); - ev = llc_station_ev(skb); - memset(ev, 0, sizeof(*ev)); llc_main_station.maximum_retry = 1; - llc_main_station.state = LLC_STATION_STATE_DOWN; - ev->type = LLC_STATION_EV_TYPE_SIMPLE; - ev->prim_type = LLC_STATION_EV_ENABLE_WITHOUT_DUP_ADDR_CHECK; - rc = llc_station_next_state(skb); -out: - return rc; + llc_main_station.state = LLC_STATION_STATE_UP; } void __exit llc_station_exit(void) -- cgit v1.2.3-70-g09d2 From f4f8720febf0d785a054fc09bde5e3ad09728a58 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Aug 2012 02:50:43 +0000 Subject: llc2: Call llc_station_exit() on llc2_init() failure path Otherwise the station packet handler will remain registered even though the module is unloaded. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- net/llc/af_llc.c | 5 +++-- net/llc/llc_station.c | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index f6fe4d40050..8c2919ca36f 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -1206,7 +1206,7 @@ static int __init llc2_init(void) rc = llc_proc_init(); if (rc != 0) { printk(llc_proc_err_msg); - goto out_unregister_llc_proto; + goto out_station; } rc = llc_sysctl_init(); if (rc) { @@ -1226,7 +1226,8 @@ out_sysctl: llc_sysctl_exit(); out_proc: llc_proc_exit(); -out_unregister_llc_proto: +out_station: + llc_station_exit(); proto_unregister(&llc_proto); goto out; } diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c index 45ddbb93c5d..bba5184fafd 100644 --- a/net/llc/llc_station.c +++ b/net/llc/llc_station.c @@ -701,7 +701,7 @@ void __init llc_station_init(void) llc_main_station.state = LLC_STATION_STATE_UP; } -void __exit llc_station_exit(void) +void llc_station_exit(void) { llc_set_station_handler(NULL); } -- cgit v1.2.3-70-g09d2 From aadf31de16a7b2878af00a02e6557df84efa784b Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Aug 2012 02:50:55 +0000 Subject: llc: Fix races between llc2 handler use and (un)registration When registering the handlers, any state they rely on must be completely initialised first. When unregistering, we must wait until they are definitely no longer running. llc_rcv() must also avoid reading the handler pointers again after checking for NULL. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- net/llc/llc_input.c | 21 +++++++++++++++++---- net/llc/llc_station.c | 2 +- 2 files changed, 18 insertions(+), 5 deletions(-) diff --git a/net/llc/llc_input.c b/net/llc/llc_input.c index e32cab44ea9..dd3e83328ad 100644 --- a/net/llc/llc_input.c +++ b/net/llc/llc_input.c @@ -42,6 +42,7 @@ static void (*llc_type_handlers[2])(struct llc_sap *sap, void llc_add_pack(int type, void (*handler)(struct llc_sap *sap, struct sk_buff *skb)) { + smp_wmb(); /* ensure initialisation is complete before it's called */ if (type == LLC_DEST_SAP || type == LLC_DEST_CONN) llc_type_handlers[type - 1] = handler; } @@ -50,11 +51,19 @@ void llc_remove_pack(int type) { if (type == LLC_DEST_SAP || type == LLC_DEST_CONN) llc_type_handlers[type - 1] = NULL; + synchronize_net(); } void llc_set_station_handler(void (*handler)(struct sk_buff *skb)) { + /* Ensure initialisation is complete before it's called */ + if (handler) + smp_wmb(); + llc_station_handler = handler; + + if (!handler) + synchronize_net(); } /** @@ -150,6 +159,8 @@ int llc_rcv(struct sk_buff *skb, struct net_device *dev, int dest; int (*rcv)(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *); + void (*sta_handler)(struct sk_buff *skb); + void (*sap_handler)(struct llc_sap *sap, struct sk_buff *skb); if (!net_eq(dev_net(dev), &init_net)) goto drop; @@ -182,7 +193,8 @@ int llc_rcv(struct sk_buff *skb, struct net_device *dev, */ rcv = rcu_dereference(sap->rcv_func); dest = llc_pdu_type(skb); - if (unlikely(!dest || !llc_type_handlers[dest - 1])) { + sap_handler = dest ? ACCESS_ONCE(llc_type_handlers[dest - 1]) : NULL; + if (unlikely(!sap_handler)) { if (rcv) rcv(skb, dev, pt, orig_dev); else @@ -193,7 +205,7 @@ int llc_rcv(struct sk_buff *skb, struct net_device *dev, if (cskb) rcv(cskb, dev, pt, orig_dev); } - llc_type_handlers[dest - 1](sap, skb); + sap_handler(sap, skb); } llc_sap_put(sap); out: @@ -202,9 +214,10 @@ drop: kfree_skb(skb); goto out; handle_station: - if (!llc_station_handler) + sta_handler = ACCESS_ONCE(llc_station_handler); + if (!sta_handler) goto drop; - llc_station_handler(skb); + sta_handler(skb); goto out; } diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c index bba5184fafd..b2f2bac2c2a 100644 --- a/net/llc/llc_station.c +++ b/net/llc/llc_station.c @@ -696,9 +696,9 @@ void __init llc_station_init(void) (unsigned long)&llc_main_station); llc_main_station.ack_timer.expires = jiffies + sysctl_llc_station_ack_timeout; - llc_set_station_handler(llc_station_rcv); llc_main_station.maximum_retry = 1; llc_main_station.state = LLC_STATION_STATE_UP; + llc_set_station_handler(llc_station_rcv); } void llc_station_exit(void) -- cgit v1.2.3-70-g09d2 From 80eb7a506fdcea08f86c9dfc7c638303bf02a3c8 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 14 Aug 2012 11:29:17 +0100 Subject: staging: comedi: Fix reversed test in comedi_device_attach() Commit 3902a370281d2f2b130f141e8cf94eab40125769 (staging: comedi: refactor comedi_device_attach() a bit) by yours truly introduced an inverted logic bug in comedi_device_attach() for the case where the driver expects the device to be configured by driver name rather than board name. The result of a strcmp() is being tested incorrectly. Fix it. Thanks to Stephen N Chivers for discovering the bug and suggesting the fix. Cc: # 3.5.x Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c index c0fdb00783e..2359151af7e 100644 --- a/drivers/staging/comedi/drivers.c +++ b/drivers/staging/comedi/drivers.c @@ -168,7 +168,7 @@ int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it) dev->board_ptr = comedi_recognize(driv, it->board_name); if (dev->board_ptr) break; - } else if (strcmp(driv->driver_name, it->board_name)) + } else if (strcmp(driv->driver_name, it->board_name) == 0) break; module_put(driv->module); } -- cgit v1.2.3-70-g09d2 From 8607dcbefb9e1bcbefe2d77f74809cf31e6a04a1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 14 Aug 2012 16:53:21 -0700 Subject: staging: csr: add INET dependancy Randy noticed that with CONFIG_INET turned off, the following build errors happen: ERROR: "register_inetaddr_notifier" [drivers/staging/csr/csr_wifi.ko] undefined! ERROR: "unregister_inetaddr_notifier" [drivers/staging/csr/csr_wifi.ko] undefined! Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/csr/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/csr/Kconfig b/drivers/staging/csr/Kconfig index cee8d48d2af..ad2a1096e92 100644 --- a/drivers/staging/csr/Kconfig +++ b/drivers/staging/csr/Kconfig @@ -1,6 +1,6 @@ config CSR_WIFI tristate "CSR wireless driver" - depends on MMC && CFG80211_WEXT + depends on MMC && CFG80211_WEXT && INET select WIRELESS_EXT select WEXT_PRIV help -- cgit v1.2.3-70-g09d2 From f37c54b6a6c56489221d42ff27305e4f8098e34b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 14 Aug 2012 05:49:47 +0000 Subject: drivers/net/ethernet/ti/davinci_cpdma.c: Remove potential NULL dereference If the NULL test is necessary, the initialization involving a dereference of the tested value should be moved after the NULL test. The sematic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_cpdma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index 3b5c4571b55..d15c888e9df 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -538,11 +538,12 @@ EXPORT_SYMBOL_GPL(cpdma_chan_create); int cpdma_chan_destroy(struct cpdma_chan *chan) { - struct cpdma_ctlr *ctlr = chan->ctlr; + struct cpdma_ctlr *ctlr; unsigned long flags; if (!chan) return -EINVAL; + ctlr = chan->ctlr; spin_lock_irqsave(&ctlr->lock, flags); if (chan->state != CPDMA_STATE_IDLE) -- cgit v1.2.3-70-g09d2 From 137bc99ff30aa1d9bf556ee9c8ba788a8ec0f595 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 14 Aug 2012 02:58:33 +0000 Subject: drivers/net/ethernet/freescale/fs_enet: fix error return code Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c | 4 +++- drivers/net/ethernet/freescale/fs_enet/mii-fec.c | 8 ++++++-- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c b/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c index 0f2d1a71090..15145330940 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c +++ b/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c @@ -174,8 +174,10 @@ static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev) new_bus->phy_mask = ~0; new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); - if (!new_bus->irq) + if (!new_bus->irq) { + ret = -ENOMEM; goto out_unmap_regs; + } new_bus->parent = &ofdev->dev; dev_set_drvdata(&ofdev->dev, new_bus); diff --git a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c index 55bb867258e..cdf702a5948 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c +++ b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c @@ -137,8 +137,10 @@ static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev) snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start); fec->fecp = ioremap(res.start, resource_size(&res)); - if (!fec->fecp) + if (!fec->fecp) { + ret = -ENOMEM; goto out_fec; + } if (get_bus_freq) { clock = get_bus_freq(ofdev->dev.of_node); @@ -172,8 +174,10 @@ static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev) new_bus->phy_mask = ~0; new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); - if (!new_bus->irq) + if (!new_bus->irq) { + ret = -ENOMEM; goto out_unmap_regs; + } new_bus->parent = &ofdev->dev; dev_set_drvdata(&ofdev->dev, new_bus); -- cgit v1.2.3-70-g09d2 From 499b95f6b324ec49e8ff50000d47877445b8590a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 14 Aug 2012 02:58:34 +0000 Subject: drivers/net/ethernet/mellanox/mlx4/mcg.c: fix error return code Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/mcg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c index 4ec3835e1bc..a018ea2a43d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mcg.c +++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c @@ -432,8 +432,10 @@ static int add_promisc_qp(struct mlx4_dev *dev, u8 port, if ((be32_to_cpu(mgm->qp[i]) & MGM_QPN_MASK) == qpn) { /* Entry already exists, add to duplicates */ dqp = kmalloc(sizeof *dqp, GFP_KERNEL); - if (!dqp) + if (!dqp) { + err = -ENOMEM; goto out_mailbox; + } dqp->qpn = qpn; list_add_tail(&dqp->list, &entry->duplicates); found = true; -- cgit v1.2.3-70-g09d2 From 4acd4945cd1e1f92b20d14e349c6c6a52acbd42d Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 14 Aug 2012 08:54:51 +0000 Subject: ipv6: addrconf: Avoid calling netdevice notifiers with RCU read-side lock Cong Wang reports that lockdep detected suspicious RCU usage while enabling IPV6 forwarding: [ 1123.310275] =============================== [ 1123.442202] [ INFO: suspicious RCU usage. ] [ 1123.558207] 3.6.0-rc1+ #109 Not tainted [ 1123.665204] ------------------------------- [ 1123.768254] include/linux/rcupdate.h:430 Illegal context switch in RCU read-side critical section! [ 1123.992320] [ 1123.992320] other info that might help us debug this: [ 1123.992320] [ 1124.307382] [ 1124.307382] rcu_scheduler_active = 1, debug_locks = 0 [ 1124.522220] 2 locks held by sysctl/5710: [ 1124.648364] #0: (rtnl_mutex){+.+.+.}, at: [] rtnl_trylock+0x15/0x17 [ 1124.882211] #1: (rcu_read_lock){.+.+.+}, at: [] rcu_lock_acquire+0x0/0x29 [ 1125.085209] [ 1125.085209] stack backtrace: [ 1125.332213] Pid: 5710, comm: sysctl Not tainted 3.6.0-rc1+ #109 [ 1125.441291] Call Trace: [ 1125.545281] [] lockdep_rcu_suspicious+0x109/0x112 [ 1125.667212] [] rcu_preempt_sleep_check+0x45/0x47 [ 1125.781838] [] __might_sleep+0x1e/0x19b [...] [ 1127.445223] [] call_netdevice_notifiers+0x4a/0x4f [...] [ 1127.772188] [] dev_disable_lro+0x32/0x6b [ 1127.885174] [] dev_forward_change+0x30/0xcb [ 1128.013214] [] addrconf_forward_change+0x85/0xc5 [...] addrconf_forward_change() uses RCU iteration over the netdev list, which is unnecessary since it already holds the RTNL lock. We also cannot reasonably require netdevice notifier functions not to sleep. Reported-by: Cong Wang Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 79181819a24..6bc85f7c31e 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -494,8 +494,7 @@ static void addrconf_forward_change(struct net *net, __s32 newf) struct net_device *dev; struct inet6_dev *idev; - rcu_read_lock(); - for_each_netdev_rcu(net, dev) { + for_each_netdev(net, dev) { idev = __in6_dev_get(dev); if (idev) { int changed = (!idev->cnf.forwarding) ^ (!newf); @@ -504,7 +503,6 @@ static void addrconf_forward_change(struct net *net, __s32 newf) dev_forward_change(idev); } } - rcu_read_unlock(); } static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int newf) -- cgit v1.2.3-70-g09d2 From 89868730a756feca7e4b21a97c86487cd565ed22 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 13 Aug 2012 19:57:31 +0100 Subject: ARM: 7490/1: Drop duplicate select for GENERIC_IRQ_PROBE Seems that Thomas' and my patches collided during the last merge window. Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e4191ccbdb7..6d6e18fee9f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -38,7 +38,6 @@ config ARM select HARDIRQS_SW_RESEND select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IRQ_PROBE select ARCH_WANT_IPC_PARSE_VERSION select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) -- cgit v1.2.3-70-g09d2 From 0fe33aae0e94b4097dd433c9399e16e17d638cd8 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 12:55:22 +0200 Subject: audit: don't free_chunk() after fsnotify_add_mark() Don't do free_chunk() after fsnotify_add_mark(). That one does a delayed unref via the destroy list and this results in use-after-free. Signed-off-by: Miklos Szeredi Acked-by: Eric Paris CC: stable@vger.kernel.org --- kernel/audit_tree.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 3a5ca582ba1..69a58515f43 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -259,7 +259,7 @@ static void untag_chunk(struct node *p) fsnotify_duplicate_mark(&new->mark, entry); if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.i.inode, NULL, 1)) { - free_chunk(new); + fsnotify_put_mark(&new->mark); goto Fallback; } @@ -322,7 +322,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree) entry = &chunk->mark; if (fsnotify_add_mark(entry, audit_tree_group, inode, NULL, 0)) { - free_chunk(chunk); + fsnotify_put_mark(entry); return -ENOSPC; } @@ -396,7 +396,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) fsnotify_duplicate_mark(chunk_entry, old_entry); if (fsnotify_add_mark(chunk_entry, chunk_entry->group, chunk_entry->i.inode, NULL, 1)) { spin_unlock(&old_entry->lock); - free_chunk(chunk); + fsnotify_put_mark(chunk_entry); fsnotify_put_mark(old_entry); return -ENOSPC; } -- cgit v1.2.3-70-g09d2 From a2140fc0cb0325bb6384e788edd27b9a568714e2 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 12:55:22 +0200 Subject: audit: fix refcounting in audit-tree Refcounting of fsnotify_mark in audit tree is broken. E.g: refcount create_chunk alloc_chunk 1 fsnotify_add_mark 2 untag_chunk fsnotify_get_mark 3 fsnotify_destroy_mark audit_tree_freeing_mark 2 fsnotify_put_mark 1 fsnotify_put_mark 0 via destroy_list fsnotify_mark_destroy -1 This was reported by various people as triggering Oops when stopping auditd. We could just remove the put_mark from audit_tree_freeing_mark() but that would break freeing via inode destruction. So this patch simply omits a put_mark after calling destroy_mark or adds a get_mark before. The additional get_mark is necessary where there's no other put_mark after fsnotify_destroy_mark() since it assumes that the caller is holding a reference (or the inode is keeping the mark pinned, not the case here AFAICS). Signed-off-by: Miklos Szeredi Reported-by: Valentin Avram Reported-by: Peter Moody Acked-by: Eric Paris CC: stable@vger.kernel.org --- kernel/audit_tree.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 69a58515f43..2b2ffff9eca 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -250,7 +250,6 @@ static void untag_chunk(struct node *p) spin_unlock(&hash_lock); spin_unlock(&entry->lock); fsnotify_destroy_mark(entry); - fsnotify_put_mark(entry); goto out; } @@ -293,7 +292,6 @@ static void untag_chunk(struct node *p) spin_unlock(&hash_lock); spin_unlock(&entry->lock); fsnotify_destroy_mark(entry); - fsnotify_put_mark(entry); goto out; Fallback: @@ -332,6 +330,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&hash_lock); chunk->dead = 1; spin_unlock(&entry->lock); + fsnotify_get_mark(entry); fsnotify_destroy_mark(entry); fsnotify_put_mark(entry); return 0; @@ -412,6 +411,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&chunk_entry->lock); spin_unlock(&old_entry->lock); + fsnotify_get_mark(chunk_entry); fsnotify_destroy_mark(chunk_entry); fsnotify_put_mark(chunk_entry); @@ -445,7 +445,6 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&old_entry->lock); fsnotify_destroy_mark(old_entry); fsnotify_put_mark(old_entry); /* pair to fsnotify_find mark_entry */ - fsnotify_put_mark(old_entry); /* and kill it */ return 0; } -- cgit v1.2.3-70-g09d2 From b3e8692b4dde5cf5fc60e4b95385229a72623182 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 12:55:22 +0200 Subject: audit: clean up refcounting in audit-tree Drop the initial reference by fsnotify_init_mark early instead of audit_tree_freeing_mark() at destroy time. In the cases we destroy the mark before we drop the initial reference we need to get rid of the get_mark that balances the put_mark in audit_tree_freeing_mark(). Signed-off-by: Miklos Szeredi --- kernel/audit_tree.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 2b2ffff9eca..ed206fd88cc 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -292,6 +292,7 @@ static void untag_chunk(struct node *p) spin_unlock(&hash_lock); spin_unlock(&entry->lock); fsnotify_destroy_mark(entry); + fsnotify_put_mark(&new->mark); /* drop initial reference */ goto out; Fallback: @@ -330,7 +331,6 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&hash_lock); chunk->dead = 1; spin_unlock(&entry->lock); - fsnotify_get_mark(entry); fsnotify_destroy_mark(entry); fsnotify_put_mark(entry); return 0; @@ -346,6 +346,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree) insert_hash(chunk); spin_unlock(&hash_lock); spin_unlock(&entry->lock); + fsnotify_put_mark(entry); /* drop initial reference */ return 0; } @@ -411,7 +412,6 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&chunk_entry->lock); spin_unlock(&old_entry->lock); - fsnotify_get_mark(chunk_entry); fsnotify_destroy_mark(chunk_entry); fsnotify_put_mark(chunk_entry); @@ -444,6 +444,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&chunk_entry->lock); spin_unlock(&old_entry->lock); fsnotify_destroy_mark(old_entry); + fsnotify_put_mark(chunk_entry); /* drop initial reference */ fsnotify_put_mark(old_entry); /* pair to fsnotify_find mark_entry */ return 0; } @@ -915,7 +916,12 @@ static void audit_tree_freeing_mark(struct fsnotify_mark *entry, struct fsnotify struct audit_chunk *chunk = container_of(entry, struct audit_chunk, mark); evict_chunk(chunk); - fsnotify_put_mark(entry); + + /* + * We are guaranteed to have at least one reference to the mark from + * either the inode or the caller of fsnotify_destroy_mark(). + */ + BUG_ON(atomic_read(&entry->refcnt) < 1); } static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *inode, -- cgit v1.2.3-70-g09d2 From e68726ff72cf7ba5e7d789857fcd9a75ca573f03 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 13:01:24 +0200 Subject: vfs: canonicalize create mode in build_open_flags() Userspace can pass weird create mode in open(2) that we canonicalize to "(mode & S_IALLUGO) | S_IFREG" in vfs_create(). The problem is that we use the uncanonicalized mode before calling vfs_create() with unforseen consequences. So do the canonicalization early in build_open_flags(). Signed-off-by: Miklos Szeredi Tested-by: Richard W.M. Jones CC: stable@vger.kernel.org --- fs/open.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/open.c b/fs/open.c index bc132e167d2..e1f2cdb91a4 100644 --- a/fs/open.c +++ b/fs/open.c @@ -852,9 +852,10 @@ static inline int build_open_flags(int flags, umode_t mode, struct open_flags *o int lookup_flags = 0; int acc_mode; - if (!(flags & O_CREAT)) - mode = 0; - op->mode = mode; + if (flags & O_CREAT) + op->mode = (mode & S_IALLUGO) | S_IFREG; + else + op->mode = 0; /* Must never be set by userspace */ flags &= ~FMODE_NONOTIFY; -- cgit v1.2.3-70-g09d2 From 62b259d8b3ea9d4a73108fc599e40c863ec25ae6 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 13:01:24 +0200 Subject: vfs: atomic_open(): fix create mode usage Don't mask S_ISREG off the create mode before passing to ->atomic_open(). Other methods (->create, ->mknod) also get the complete file mode and filesystems expect it. Reported-by: Steve Reported-by: Richard W.M. Jones Signed-off-by: Miklos Szeredi Tested-by: Richard W.M. Jones --- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index 1b464390dde..5bac1bb6e58 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2414,7 +2414,7 @@ static int atomic_open(struct nameidata *nd, struct dentry *dentry, goto out; } - mode = op->mode & S_IALLUGO; + mode = op->mode; if ((open_flag & O_CREAT) && !IS_POSIXACL(dir)) mode &= ~current_umask(); -- cgit v1.2.3-70-g09d2 From 38227f78a5020b3100cbb0406c89807563b10dae Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 13:01:24 +0200 Subject: vfs: pass right create mode to may_o_create() Pass the umask-ed create mode to may_o_create() instead of the original one. Signed-off-by: Miklos Szeredi Tested-by: Richard W.M. Jones --- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index 5bac1bb6e58..26c28ec4f4a 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2452,7 +2452,7 @@ static int atomic_open(struct nameidata *nd, struct dentry *dentry, } if (open_flag & O_CREAT) { - error = may_o_create(&nd->path, dentry, op->mode); + error = may_o_create(&nd->path, dentry, mode); if (error) { create_error = error; if (open_flag & O_EXCL) -- cgit v1.2.3-70-g09d2 From af109bca94a8a223c4632a4ff769b3419fe7ed8c Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 13:01:24 +0200 Subject: fuse: check create mode in atomic open Verify that the VFS is passing us a complete create mode with the S_IFREG to atomic open. Reported-by: Steve Reported-by: Richard W.M. Jones Signed-off-by: Miklos Szeredi Tested-by: Richard W.M. Jones --- fs/fuse/dir.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 8964cf3999b..324bc085053 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -383,6 +383,9 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, struct fuse_entry_out outentry; struct fuse_file *ff; + /* Userspace expects S_IFREG in create mode */ + BUG_ON((mode & S_IFMT) != S_IFREG); + forget = fuse_alloc_forget(); err = -ENOMEM; if (!forget) -- cgit v1.2.3-70-g09d2 From 2e84f2641ea91a730642ead558a4ee3bd52310c9 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 15 Aug 2012 13:50:27 +0200 Subject: jbd: don't write superblock when unmounting an ro filesystem This sequence: results in an IO error when unmounting the RO filesystem. The bug was introduced by: commit 9754e39c7bc51328f145e933bfb0df47cd67b6e9 Author: Jan Kara Date: Sat Apr 7 12:33:03 2012 +0200 jbd: Split updating of journal superblock and marking journal empty which lost some of the magic in journal_update_superblock() which used to test for a journal with no outstanding transactions. This is a port of a jbd2 fix by Eric Sandeen. CC: # 3.4.x Signed-off-by: Jan Kara --- fs/jbd/journal.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 09357508ec9..a2862339323 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -1113,6 +1113,11 @@ static void mark_journal_empty(journal_t *journal) BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex)); spin_lock(&journal->j_state_lock); + /* Is it already empty? */ + if (sb->s_start == 0) { + spin_unlock(&journal->j_state_lock); + return; + } jbd_debug(1, "JBD: Marking journal as empty (seq %d)\n", journal->j_tail_sequence); -- cgit v1.2.3-70-g09d2 From 68766a2edcd5cd744262a70a2f67a320ac944760 Mon Sep 17 00:00:00 2001 From: Nikola Pajkovsky Date: Wed, 15 Aug 2012 00:38:08 +0200 Subject: udf: fix retun value on error path in udf_load_logicalvol In case we detect a problem and bail out, we fail to set "ret" to a nonzero value, and udf_load_logicalvol will mistakenly report success. Signed-off-by: Nikola Pajkovsky Signed-off-by: Jan Kara --- fs/udf/super.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/udf/super.c b/fs/udf/super.c index 9f55f7981b7..18fc038a438 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -1344,6 +1344,7 @@ static int udf_load_logicalvol(struct super_block *sb, sector_t block, udf_err(sb, "error loading logical volume descriptor: " "Partition table too long (%u > %lu)\n", table_len, sb->s_blocksize - sizeof(*lvd)); + ret = 1; goto out_bh; } @@ -1388,8 +1389,10 @@ static int udf_load_logicalvol(struct super_block *sb, sector_t block, UDF_ID_SPARABLE, strlen(UDF_ID_SPARABLE))) { if (udf_load_sparable_map(sb, map, - (struct sparablePartitionMap *)gpm) < 0) + (struct sparablePartitionMap *)gpm) < 0) { + ret = 1; goto out_bh; + } } else if (!strncmp(upm2->partIdent.ident, UDF_ID_METADATA, strlen(UDF_ID_METADATA))) { -- cgit v1.2.3-70-g09d2 From 4e8b14526ca7fb046a81c94002c1c43b6fdf0e9b Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 8 Aug 2012 15:36:20 -0400 Subject: time: Improve sanity checking of timekeeping inputs Unexpected behavior could occur if the time is set to a value large enough to overflow a 64bit ktime_t (which is something larger then the year 2262). Also unexpected behavior could occur if large negative offsets are injected via adjtimex. So this patch improves the sanity check timekeeping inputs by improving the timespec_valid() check, and then makes better use of timespec_valid() to make sure we don't set the time to an invalid negative value or one that overflows ktime_t. Note: This does not protect from setting the time close to overflowing ktime_t and then letting natural accumulation cause the overflow. Reported-by: CAI Qian Reported-by: Sasha Levin Signed-off-by: John Stultz Cc: Peter Zijlstra Cc: Prarit Bhargava Cc: Zhouping Liu Cc: Ingo Molnar Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1344454580-17031-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- include/linux/ktime.h | 7 ------- include/linux/time.h | 22 ++++++++++++++++++++-- kernel/time/timekeeping.c | 26 ++++++++++++++++++++++++-- 3 files changed, 44 insertions(+), 11 deletions(-) diff --git a/include/linux/ktime.h b/include/linux/ktime.h index 603bec2913b..06177ba10a1 100644 --- a/include/linux/ktime.h +++ b/include/linux/ktime.h @@ -58,13 +58,6 @@ union ktime { typedef union ktime ktime_t; /* Kill this */ -#define KTIME_MAX ((s64)~((u64)1 << 63)) -#if (BITS_PER_LONG == 64) -# define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC) -#else -# define KTIME_SEC_MAX LONG_MAX -#endif - /* * ktime_t definitions when using the 64-bit scalar representation: */ diff --git a/include/linux/time.h b/include/linux/time.h index c81c5e40fcb..b0bbd8f0130 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -107,11 +107,29 @@ static inline struct timespec timespec_sub(struct timespec lhs, return ts_delta; } +#define KTIME_MAX ((s64)~((u64)1 << 63)) +#if (BITS_PER_LONG == 64) +# define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC) +#else +# define KTIME_SEC_MAX LONG_MAX +#endif + /* * Returns true if the timespec is norm, false if denorm: */ -#define timespec_valid(ts) \ - (((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC)) +static inline bool timespec_valid(const struct timespec *ts) +{ + /* Dates before 1970 are bogus */ + if (ts->tv_sec < 0) + return false; + /* Can't have more nanoseconds then a second */ + if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) + return false; + /* Disallow values that could overflow ktime_t */ + if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX) + return false; + return true; +} extern void read_persistent_clock(struct timespec *ts); extern void read_boot_clock(struct timespec *ts); diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index e16af197a2b..898bef066a4 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -427,7 +427,7 @@ int do_settimeofday(const struct timespec *tv) struct timespec ts_delta, xt; unsigned long flags; - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) + if (!timespec_valid(tv)) return -EINVAL; write_seqlock_irqsave(&tk->lock, flags); @@ -463,6 +463,8 @@ int timekeeping_inject_offset(struct timespec *ts) { struct timekeeper *tk = &timekeeper; unsigned long flags; + struct timespec tmp; + int ret = 0; if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) return -EINVAL; @@ -471,10 +473,17 @@ int timekeeping_inject_offset(struct timespec *ts) timekeeping_forward_now(tk); + /* Make sure the proposed value is valid */ + tmp = timespec_add(tk_xtime(tk), *ts); + if (!timespec_valid(&tmp)) { + ret = -EINVAL; + goto error; + } tk_xtime_add(tk, ts); tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *ts)); +error: /* even if we error out, we forwarded the time, so call update */ timekeeping_update(tk, true); write_sequnlock_irqrestore(&tk->lock, flags); @@ -482,7 +491,7 @@ int timekeeping_inject_offset(struct timespec *ts) /* signal hrtimers about time change */ clock_was_set(); - return 0; + return ret; } EXPORT_SYMBOL(timekeeping_inject_offset); @@ -649,7 +658,20 @@ void __init timekeeping_init(void) struct timespec now, boot, tmp; read_persistent_clock(&now); + if (!timespec_valid(&now)) { + pr_warn("WARNING: Persistent clock returned invalid value!\n" + " Check your CMOS/BIOS settings.\n"); + now.tv_sec = 0; + now.tv_nsec = 0; + } + read_boot_clock(&boot); + if (!timespec_valid(&boot)) { + pr_warn("WARNING: Boot clock returned invalid value!\n" + " Check your CMOS/BIOS settings.\n"); + boot.tv_sec = 0; + boot.tv_nsec = 0; + } seqlock_init(&tk->lock); -- cgit v1.2.3-70-g09d2 From 58569aee5a1a5dcc25c34a0a2ed9a377874e6b05 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Thu, 26 Jul 2012 12:15:46 +0200 Subject: ARM: Orion: Set eth packet size csum offload limit The mv643xx ethernet controller limits the packet size for the TX checksum offloading. This patch sets this limits for Kirkwood and Dove which have smaller limits that the default. As a side note, this patch is an updated version of a patch sent some years ago: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-June/017320.html which seems to have been lost. Signed-off-by: Arnaud Patard Signed-off-by: Jason Cooper Cc: --- arch/arm/mach-dove/common.c | 3 ++- arch/arm/mach-kirkwood/common.c | 4 ++-- arch/arm/mach-mv78xx0/common.c | 6 ++++-- arch/arm/mach-orion5x/common.c | 3 ++- arch/arm/plat-orion/common.c | 8 ++++++-- arch/arm/plat-orion/include/plat/common.h | 6 ++++-- include/linux/mv643xx_eth.h | 2 ++ 7 files changed, 22 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de54b6a..6321567d8ea 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -102,7 +102,8 @@ void __init dove_ehci1_init(void) void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c4b64adcbfc..3226077735b 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR); + IRQ_KIRKWOOD_GE00_ERR, 1600); /* The interface forgets the MAC address assigned by u-boot if the clock is turned off, so claim the clk now. */ clk_prepare_enable(ge0); @@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR); + IRQ_KIRKWOOD_GE01_ERR, 1600); clk_prepare_enable(ge1); } diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b4c53b846c9..3057f7d4329 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR); + IRQ_MV78XX0_GE_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - NO_IRQ); + NO_IRQ, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9148b229d0d..410291c6766 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR); + IRQ_ORION5X_ETH_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index d245a87dc01..b8b747a9d36 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = { void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); @@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = { void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e00fdb21360..ae2377ef63e 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase, void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h index 51bf8ada6dc..49258e0ed1c 100644 --- a/include/linux/mv643xx_eth.h +++ b/include/linux/mv643xx_eth.h @@ -15,6 +15,8 @@ #define MV643XX_ETH_SIZE_REG_4 0x2224 #define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x2290 +#define MV643XX_TX_CSUM_DEFAULT_LIMIT 0 + struct mv643xx_eth_shared_platform_data { struct mbus_dram_target_info *dram; struct platform_device *shared_smi; -- cgit v1.2.3-70-g09d2 From 03810a20308af54d01b096bc19a8c145684bd6b2 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Sun, 5 Aug 2012 22:35:56 +0200 Subject: ARM: Kirkwood: Fix iconnect leds While converting, a led has been missed leading to wrong power blue led definition. Add it back and fix the gpio used on the power blue led. Signed-off-by: Arnaud Patard Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-iconnect.dts | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 52d94704510..f8ca6fa8819 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -41,9 +41,13 @@ }; power-blue { label = "power:blue"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 10 0>; linux,default-trigger = "timer"; }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; usb1 { label = "usb1:blue"; gpios = <&gpio1 12 0>; -- cgit v1.2.3-70-g09d2 From b74ffd85e32d44e8ed405a2a0a175ef4cd39cf67 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Sun, 5 Aug 2012 22:35:57 +0200 Subject: ARM: Kirkwood: fix Makefile.boot While building the dtbs target, one is getting: make dtbs make[1]: *** No rule to make target `arch/arm/boot/kirkwood-qnap-ts219.dtb', needed by `arch/arm/boot/dtbs'. Stop. make: *** [dtbs] Error 2 The reason is that there's no kirkwood-qnap-ts219.dts file. Update Makefile.boot to reflect the dts files present. Signed-off-by: Arnaud Patard Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/Makefile.boot | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 2a576abf409..e2ad35803d2 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb -dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb -- cgit v1.2.3-70-g09d2 From 908d6d52928a7f2a4b317aac47542c5fbef43d88 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 15 Aug 2012 01:10:04 +0300 Subject: regulator: twl-regulator: fix up VINTANA1/VINTANA2 It seems commit 2098e95ce9bb039ff2e7bf836df358d18a176139 (regulator: twl: adapt twl-regulator driver to dt) accidentally deleted VINTANA1. Also the same commit defines VINTANA2 twice with TWL4030_ADJUSTABLE_LDO and TWL4030_FIXED_LDO. This patch changes the fixed one to be VINTANA1. I noticed this when auditing my N900 boot logs. I could not notice any change in device behaviour, though, except that the boot logs are now like before: ... [ 0.282928] VDAC: 1800 mV normal standby [ 0.284027] VCSI: 1800 mV normal standby [ 0.285400] VINTANA1: 1500 mV normal standby [ 0.286865] VINTANA2: 2750 mV normal standby [ 0.288208] VINTDIG: 1500 mV normal standby [ 0.289978] VSDI_CSI: 1800 mV normal standby ... Signed-off-by: Aaro Koskinen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/twl-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 30cb62289b7..77a71a5c17c 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -1037,7 +1037,7 @@ TWL6025_ADJUSTABLE_LDO(LDO7, 0x74, 1000, 3300); TWL6025_ADJUSTABLE_LDO(LDO6, 0x60, 1000, 3300); TWL6025_ADJUSTABLE_LDO(LDOLN, 0x64, 1000, 3300); TWL6025_ADJUSTABLE_LDO(LDOUSB, 0x70, 1000, 3300); -TWL4030_FIXED_LDO(VINTANA2, 0x3f, 1500, 11, 100, 0x08); +TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08); TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08); TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08); TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08); @@ -1116,7 +1116,7 @@ static const struct of_device_id twl_of_match[] __devinitconst = { TWL6025_OF_MATCH("ti,twl6025-ldo6", LDO6), TWL6025_OF_MATCH("ti,twl6025-ldoln", LDOLN), TWL6025_OF_MATCH("ti,twl6025-ldousb", LDOUSB), - TWLFIXED_OF_MATCH("ti,twl4030-vintana2", VINTANA2), + TWLFIXED_OF_MATCH("ti,twl4030-vintana1", VINTANA1), TWLFIXED_OF_MATCH("ti,twl4030-vintdig", VINTDIG), TWLFIXED_OF_MATCH("ti,twl4030-vusb1v5", VUSB1V5), TWLFIXED_OF_MATCH("ti,twl4030-vusb1v8", VUSB1V8), -- cgit v1.2.3-70-g09d2 From 6330c790dae1229bb33571c48984ca42a8a4c250 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 15 Aug 2012 11:52:01 -0400 Subject: C6X: add Lx_CACHE_SHIFT defines C6X currently lacks Lx_CACHE_SHIFT defines which are needed in a few places in the generic kernel. This patch adds _SHIFT defines for the various caches and bases the Lx_CACHE_BYTES defines on them. Signed-off-by: Mark Salter --- arch/c6x/include/asm/cache.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/c6x/include/asm/cache.h b/arch/c6x/include/asm/cache.h index 6d521d96d94..09c5a0f5f4d 100644 --- a/arch/c6x/include/asm/cache.h +++ b/arch/c6x/include/asm/cache.h @@ -1,7 +1,7 @@ /* * Port on Texas Instruments TMS320C6x architecture * - * Copyright (C) 2005, 2006, 2009, 2010 Texas Instruments Incorporated + * Copyright (C) 2005, 2006, 2009, 2010, 2012 Texas Instruments Incorporated * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) * * This program is free software; you can redistribute it and/or modify @@ -16,9 +16,14 @@ /* * Cache line size */ -#define L1D_CACHE_BYTES 64 -#define L1P_CACHE_BYTES 32 -#define L2_CACHE_BYTES 128 +#define L1D_CACHE_SHIFT 6 +#define L1D_CACHE_BYTES (1 << L1D_CACHE_SHIFT) + +#define L1P_CACHE_SHIFT 5 +#define L1P_CACHE_BYTES (1 << L1P_CACHE_SHIFT) + +#define L2_CACHE_SHIFT 7 +#define L2_CACHE_BYTES (1 << L2_CACHE_SHIFT) /* * L2 used as cache @@ -29,7 +34,8 @@ * For practical reasons the L1_CACHE_BYTES defines should not be smaller than * the L2 line size */ -#define L1_CACHE_BYTES L2_CACHE_BYTES +#define L1_CACHE_SHIFT L2_CACHE_SHIFT +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) #define L2_CACHE_ALIGN_LOW(x) \ (((x) & ~(L2_CACHE_BYTES - 1))) -- cgit v1.2.3-70-g09d2 From 01ddd9a809b9a95df097ff1b5565f806e681a606 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 15 Aug 2012 12:12:16 -0400 Subject: C6X: select GENERIC_ATOMIC64 The generic atomic64 support came in 2009 to support the perf subsystem with the expectation that all architectures would implement atomic64 support. Since then, other optional parts of the generic kernel have also come to expect atomic64 support. This patch enables generic atomic64 support for C6X architecture. Signed-off-by: Mark Salter --- arch/c6x/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig index 052f81a7623..983c859e40b 100644 --- a/arch/c6x/Kconfig +++ b/arch/c6x/Kconfig @@ -6,6 +6,7 @@ config C6X def_bool y select CLKDEV_LOOKUP + select GENERIC_ATOMIC64 select GENERIC_IRQ_SHOW select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG -- cgit v1.2.3-70-g09d2 From 3d0882c0d10d4b4785aeaf26043e764e3aaca825 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 4 Aug 2012 23:27:32 +0200 Subject: PCI / PM: Fix D3/D3cold/D4 messages printed by acpi_pci_set_power_state() If a PCI device is put into D3_cold by acpi_bus_set_power(), the message printed by acpi_pci_set_power_state() says that its power state has been changed to D4, which doesn't make sense. In turn, if the device is put into D3_hot, the message simply says "D3" without specifying the variant of the D3 state. Fix this by using the pci_power_name() macro for printing the state name instead of building it from the numeric value corresponding to the given state directly. Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas --- drivers/pci/pci-acpi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index fbf7b26c7c8..c5792d622dc 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -266,8 +266,8 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) } if (!error) - dev_printk(KERN_INFO, &dev->dev, - "power state changed by ACPI to D%d\n", state); + dev_info(&dev->dev, "power state changed by ACPI to %s\n", + pci_power_name(state)); return error; } -- cgit v1.2.3-70-g09d2 From 0b68c8e2c3afaf9807eb1ebe0ccfb3b809570aa4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 12 Aug 2012 23:26:07 +0200 Subject: PCI: EHCI: Fix crash during hibernation on ASUS computers Commit dbf0e4c (PCI: EHCI: fix crash during suspend on ASUS computers) added a workaround for an ASUS suspend issue related to USB EHCI and a bug in a number of ASUS BIOSes that attempt to shut down the EHCI controller during system suspend if its PCI command register doesn't contain 0 at that time. It turns out that the same workaround is necessary in the analogous hibernation code path, so add it. References: https://bugzilla.kernel.org/show_bug.cgi?id=45811 Reported-and-tested-by: Oleksij Rempel Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org --- drivers/pci/pci-driver.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 185be370334..5270f1a9932 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -959,6 +959,13 @@ static int pci_pm_poweroff_noirq(struct device *dev) if (!pci_dev->state_saved && !pci_is_bridge(pci_dev)) pci_prepare_to_sleep(pci_dev); + /* + * The reason for doing this here is the same as for the analogous code + * in pci_pm_suspend_noirq(). + */ + if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI) + pci_write_config_word(pci_dev, PCI_COMMAND, 0); + return 0; } -- cgit v1.2.3-70-g09d2 From 142ad5db2b29a1c392e1b14934fae5d161d6c6e7 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 10 Aug 2012 00:07:58 +0000 Subject: IB: Fix typos in infiniband drivers Correct spelling typos in comments in drivers/infiniband. Signed-off-by: Masanari Iida Signed-off-by: Roland Dreier --- drivers/infiniband/hw/amso1100/c2_rnic.c | 2 +- drivers/infiniband/hw/cxgb3/iwch_cm.c | 2 +- drivers/infiniband/hw/qib/qib_sd7220.c | 2 +- drivers/infiniband/ulp/srpt/ib_srpt.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c index 8c81992fa6d..e4a73158fc7 100644 --- a/drivers/infiniband/hw/amso1100/c2_rnic.c +++ b/drivers/infiniband/hw/amso1100/c2_rnic.c @@ -439,7 +439,7 @@ static int c2_rnic_close(struct c2_dev *c2dev) /* * Called by c2_probe to initialize the RNIC. This principally - * involves initalizing the various limits and resouce pools that + * involves initializing the various limits and resource pools that * comprise the RNIC instance. */ int __devinit c2_rnic_init(struct c2_dev *c2dev) diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index 77b6b182778..aaf88ef9409 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -1680,7 +1680,7 @@ static int close_con_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) * T3A does 3 things when a TERM is received: * 1) send up a CPL_RDMA_TERMINATE message with the TERM packet * 2) generate an async event on the QP with the TERMINATE opcode - * 3) post a TERMINATE opcde cqe into the associated CQ. + * 3) post a TERMINATE opcode cqe into the associated CQ. * * For (1), we save the message in the qp for later consumer consumption. * For (2), we move the QP into TERMINATE, post a QP event and disconnect. diff --git a/drivers/infiniband/hw/qib/qib_sd7220.c b/drivers/infiniband/hw/qib/qib_sd7220.c index a322d5171a2..50a8a0d4fe6 100644 --- a/drivers/infiniband/hw/qib/qib_sd7220.c +++ b/drivers/infiniband/hw/qib/qib_sd7220.c @@ -372,7 +372,7 @@ static void qib_sd_trimdone_monitor(struct qib_devdata *dd, /* Read CTRL reg for each channel to check TRIMDONE */ if (baduns & (1 << chn)) { qib_dev_err(dd, - "Reseting TRIMDONE on chn %d (%s)\n", + "Resetting TRIMDONE on chn %d (%s)\n", chn, where); ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, IB_CTRL2(chn), 0x10, 0x10); diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 7a0ce8d4288..9e1449f8c6a 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -1469,7 +1469,7 @@ static void srpt_handle_send_comp(struct srpt_rdma_ch *ch, * * XXX: what is now target_execute_cmd used to be asynchronous, and unmapping * the data that has been transferred via IB RDMA had to be postponed until the - * check_stop_free() callback. None of this is nessecary anymore and needs to + * check_stop_free() callback. None of this is necessary anymore and needs to * be cleaned up. */ static void srpt_handle_rdma_comp(struct srpt_rdma_ch *ch, -- cgit v1.2.3-70-g09d2 From 51fa3ca37e3bebb291dbe50faa3cb259af35e978 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 14 Aug 2012 12:58:35 +0000 Subject: IB/qib: Fix error return code in qib_init_7322_variables() Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // Signed-off-by: Julia Lawall Acked-by: Mike Marciniszyn Signed-off-by: Roland Dreier --- drivers/infiniband/hw/qib/qib_iba7322.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 0d7280af99b..3f6b21e9dc1 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -6346,8 +6346,10 @@ static int qib_init_7322_variables(struct qib_devdata *dd) dd->piobcnt4k * dd->align4k; dd->piovl15base = ioremap_nocache(vl15off, NUM_VL15_BUFS * dd->align4k); - if (!dd->piovl15base) + if (!dd->piovl15base) { + ret = -ENOMEM; goto bail; + } } qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ -- cgit v1.2.3-70-g09d2 From 220329916c72ee3d54ae7262b215a050f04a18fc Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 14 Aug 2012 13:18:53 +0000 Subject: IB/srp: Fix a race condition Avoid a crash caused by the scmnd->scsi_done(scmnd) call in srp_process_rsp() being invoked with scsi_done == NULL. This can happen if a reply is received during or after a command abort. Reported-by: Joseph Glanville Reference: http://marc.info/?l=linux-rdma&m=134314367801595 Cc: Acked-by: David Dillow Signed-off-by: Bart Van Assche Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srp/ib_srp.c | 87 +++++++++++++++++++++++++++---------- 1 file changed, 63 insertions(+), 24 deletions(-) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index bcbf22ee0aa..1b5b0c73005 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -586,24 +586,62 @@ static void srp_unmap_data(struct scsi_cmnd *scmnd, scmnd->sc_data_direction); } -static void srp_remove_req(struct srp_target_port *target, - struct srp_request *req, s32 req_lim_delta) +/** + * srp_claim_req - Take ownership of the scmnd associated with a request. + * @target: SRP target port. + * @req: SRP request. + * @scmnd: If NULL, take ownership of @req->scmnd. If not NULL, only take + * ownership of @req->scmnd if it equals @scmnd. + * + * Return value: + * Either NULL or a pointer to the SCSI command the caller became owner of. + */ +static struct scsi_cmnd *srp_claim_req(struct srp_target_port *target, + struct srp_request *req, + struct scsi_cmnd *scmnd) +{ + unsigned long flags; + + spin_lock_irqsave(&target->lock, flags); + if (!scmnd) { + scmnd = req->scmnd; + req->scmnd = NULL; + } else if (req->scmnd == scmnd) { + req->scmnd = NULL; + } else { + scmnd = NULL; + } + spin_unlock_irqrestore(&target->lock, flags); + + return scmnd; +} + +/** + * srp_free_req() - Unmap data and add request to the free request list. + */ +static void srp_free_req(struct srp_target_port *target, + struct srp_request *req, struct scsi_cmnd *scmnd, + s32 req_lim_delta) { unsigned long flags; - srp_unmap_data(req->scmnd, target, req); + srp_unmap_data(scmnd, target, req); + spin_lock_irqsave(&target->lock, flags); target->req_lim += req_lim_delta; - req->scmnd = NULL; list_add_tail(&req->list, &target->free_reqs); spin_unlock_irqrestore(&target->lock, flags); } static void srp_reset_req(struct srp_target_port *target, struct srp_request *req) { - req->scmnd->result = DID_RESET << 16; - req->scmnd->scsi_done(req->scmnd); - srp_remove_req(target, req, 0); + struct scsi_cmnd *scmnd = srp_claim_req(target, req, NULL); + + if (scmnd) { + scmnd->result = DID_RESET << 16; + scmnd->scsi_done(scmnd); + srp_free_req(target, req, scmnd, 0); + } } static int srp_reconnect_target(struct srp_target_port *target) @@ -1073,11 +1111,18 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp) complete(&target->tsk_mgmt_done); } else { req = &target->req_ring[rsp->tag]; - scmnd = req->scmnd; - if (!scmnd) + scmnd = srp_claim_req(target, req, NULL); + if (!scmnd) { shost_printk(KERN_ERR, target->scsi_host, "Null scmnd for RSP w/tag %016llx\n", (unsigned long long) rsp->tag); + + spin_lock_irqsave(&target->lock, flags); + target->req_lim += be32_to_cpu(rsp->req_lim_delta); + spin_unlock_irqrestore(&target->lock, flags); + + return; + } scmnd->result = rsp->status; if (rsp->flags & SRP_RSP_FLAG_SNSVALID) { @@ -1092,7 +1137,9 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp) else if (rsp->flags & (SRP_RSP_FLAG_DIOVER | SRP_RSP_FLAG_DIUNDER)) scsi_set_resid(scmnd, be32_to_cpu(rsp->data_in_res_cnt)); - srp_remove_req(target, req, be32_to_cpu(rsp->req_lim_delta)); + srp_free_req(target, req, scmnd, + be32_to_cpu(rsp->req_lim_delta)); + scmnd->host_scribble = NULL; scmnd->scsi_done(scmnd); } @@ -1631,25 +1678,17 @@ static int srp_abort(struct scsi_cmnd *scmnd) { struct srp_target_port *target = host_to_target(scmnd->device->host); struct srp_request *req = (struct srp_request *) scmnd->host_scribble; - int ret = SUCCESS; shost_printk(KERN_ERR, target->scsi_host, "SRP abort called\n"); - if (!req || target->qp_in_error) + if (!req || target->qp_in_error || !srp_claim_req(target, req, scmnd)) return FAILED; - if (srp_send_tsk_mgmt(target, req->index, scmnd->device->lun, - SRP_TSK_ABORT_TASK)) - return FAILED; - - if (req->scmnd) { - if (!target->tsk_mgmt_status) { - srp_remove_req(target, req, 0); - scmnd->result = DID_ABORT << 16; - } else - ret = FAILED; - } + srp_send_tsk_mgmt(target, req->index, scmnd->device->lun, + SRP_TSK_ABORT_TASK); + srp_free_req(target, req, scmnd, 0); + scmnd->result = DID_ABORT << 16; - return ret; + return SUCCESS; } static int srp_reset_device(struct scsi_cmnd *scmnd) -- cgit v1.2.3-70-g09d2 From c03307eab68d583ea6db917681afa14ed1fb3b84 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 14 Aug 2012 08:19:33 -0700 Subject: bridge: fix rcu dereference outside of rcu_read_lock Alternative solution for problem found by Linux Driver Verification project (linuxtesting.org). As it noted in the comment before the br_handle_frame_finish function, this function should be called under rcu_read_lock. The problem callgraph: br_dev_xmit -> br_nf_pre_routing_finish_bridge_slow -> -> br_handle_frame_finish -> br_port_get_rcu -> rcu_dereference And in this case there is no read-lock section. Reported-by: Denis Efremov Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_device.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index 32211fa5b50..070e8a68cfc 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -31,9 +31,11 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev) struct net_bridge_mdb_entry *mdst; struct br_cpu_netstats *brstats = this_cpu_ptr(br->stats); + rcu_read_lock(); #ifdef CONFIG_BRIDGE_NETFILTER if (skb->nf_bridge && (skb->nf_bridge->mask & BRNF_BRIDGED_DNAT)) { br_nf_pre_routing_finish_bridge_slow(skb); + rcu_read_unlock(); return NETDEV_TX_OK; } #endif @@ -48,7 +50,6 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev) skb_reset_mac_header(skb); skb_pull(skb, ETH_HLEN); - rcu_read_lock(); if (is_broadcast_ether_addr(dest)) br_flood_deliver(br, skb); else if (is_multicast_ether_addr(dest)) { -- cgit v1.2.3-70-g09d2 From e3bc4ffb814c847bde7706a80d5684d12c676a8b Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Tue, 14 Aug 2012 17:13:36 +0100 Subject: vmxnet3: Fix race between dev_open() and register_netdev() dev_open() can complete before register_netdev() returns. Fix vmxnet3_probe_device() to support this. Signed-off-by: Steve Hodgson Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 93e0cfb739b..ce9d4f2c977 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -3019,6 +3019,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, netdev->watchdog_timeo = 5 * HZ; INIT_WORK(&adapter->work, vmxnet3_reset_work); + set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); if (adapter->intr.type == VMXNET3_IT_MSIX) { int i; @@ -3043,7 +3044,6 @@ vmxnet3_probe_device(struct pci_dev *pdev, goto err_register; } - set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); vmxnet3_check_link(adapter, false); atomic_inc(&devices_found); return 0; -- cgit v1.2.3-70-g09d2 From f1b5c997e68533df1f96dcd3068a231bca495603 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Wed, 15 Aug 2012 15:43:33 +0200 Subject: USB: option: add ZTE K5006-Z MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ZTE (Vodafone) K5006-Z use the following interface layout: 00 DIAG 01 secondary 02 modem 03 networkcard 04 storage Ignoring interface #3 which is handled by the qmi_wwan driver. Cc: Thomas Schäfer Cc: stable Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 99306281dcb..cc40f47ecea 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -886,6 +886,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) }, -- cgit v1.2.3-70-g09d2 From 1e658489ba8d87b7c89ca6f734b8319acc534dbc Mon Sep 17 00:00:00 2001 From: Mark Ferrell Date: Tue, 24 Jul 2012 13:38:31 -0500 Subject: USB: serial: Fix mos7840 timeout * mos7840 driver was using multiple of HZ for the timeout handed off to usb_control_msg(). Changed the timeout to use msecs instead. * Remove unused WAIT_FOR_EVER definition Signed-off-by: Mark Ferrell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 009c1d99e14..2f6da1e89bf 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -82,8 +82,7 @@ * Defines used for sending commands to port */ -#define WAIT_FOR_EVER (HZ * 0) /* timeout urb is wait for ever */ -#define MOS_WDR_TIMEOUT (HZ * 5) /* default urb timeout */ +#define MOS_WDR_TIMEOUT 5000 /* default urb timeout */ #define MOS_PORT1 0x0200 #define MOS_PORT2 0x0300 @@ -1347,7 +1346,7 @@ static void mos7840_close(struct usb_serial_port *port) static void mos7840_block_until_chase_response(struct tty_struct *tty, struct moschip_port *mos7840_port) { - int timeout = 1 * HZ; + int timeout = msecs_to_jiffies(1000); int wait = 10; int count; @@ -2675,7 +2674,7 @@ static int mos7840_startup(struct usb_serial *serial) /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ); + (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT); return 0; error: for (/* nothing */; i >= 0; i--) { -- cgit v1.2.3-70-g09d2 From 1690d86aa33fa14c0ae4ac97e59d806eeddccd2c Mon Sep 17 00:00:00 2001 From: Alex Gershgorin Date: Wed, 1 Aug 2012 05:05:10 -0300 Subject: [media] media: mx3_camera: buf_init() add buffer state check This patch checks the state of the buffer when calling .buf_init() method. This is needed for the USERPTR buffer type, because in that case .buf_init() is called every time a buffer is queued, and not only once during the preparation stage, like in the MMAP case. Without this check buffers get initialised repeatedly, which also leads to the allocation of new DMA descriptors, of which there is only a final relatively small number available. Both MMAP and USERPTR methods were successfully tested. Signed-off-by: Alex Gershgorin [g.liakhovetski@gmx.de: remove mx3_camera_buffer::state completely] Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx3_camera.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index f13643d3135..af2297dd49c 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -61,15 +61,9 @@ #define MAX_VIDEO_MEM 16 -enum csi_buffer_state { - CSI_BUF_NEEDS_INIT, - CSI_BUF_PREPARED, -}; - struct mx3_camera_buffer { /* common v4l buffer stuff -- must be first */ struct vb2_buffer vb; - enum csi_buffer_state state; struct list_head queue; /* One descriptot per scatterlist (per frame) */ @@ -285,7 +279,7 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb) goto error; } - if (buf->state == CSI_BUF_NEEDS_INIT) { + if (!buf->txd) { sg_dma_address(sg) = vb2_dma_contig_plane_dma_addr(vb, 0); sg_dma_len(sg) = new_size; @@ -298,7 +292,6 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb) txd->callback_param = txd; txd->callback = mx3_cam_dma_done; - buf->state = CSI_BUF_PREPARED; buf->txd = txd; } else { txd = buf->txd; @@ -385,7 +378,6 @@ static void mx3_videobuf_release(struct vb2_buffer *vb) /* Doesn't hurt also if the list is empty */ list_del_init(&buf->queue); - buf->state = CSI_BUF_NEEDS_INIT; if (txd) { buf->txd = NULL; @@ -405,13 +397,13 @@ static int mx3_videobuf_init(struct vb2_buffer *vb) struct mx3_camera_dev *mx3_cam = ici->priv; struct mx3_camera_buffer *buf = to_mx3_vb(vb); - /* This is for locking debugging only */ - INIT_LIST_HEAD(&buf->queue); - sg_init_table(&buf->sg, 1); + if (!buf->txd) { + /* This is for locking debugging only */ + INIT_LIST_HEAD(&buf->queue); + sg_init_table(&buf->sg, 1); - buf->state = CSI_BUF_NEEDS_INIT; - - mx3_cam->buf_total += vb2_plane_size(vb, 0); + mx3_cam->buf_total += vb2_plane_size(vb, 0); + } return 0; } -- cgit v1.2.3-70-g09d2 From 5c4dfc84a88e1108f5ddba256ecaab6fe45f94e5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 25 May 2012 20:14:47 -0300 Subject: [media] video: mx1_camera: Use clk_prepare_enable/clk_disable_unprepare Prepare the clock before enabling it. Cc: Guennadi Liakhovetski Cc: Signed-off-by: Fabio Estevam Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx1_camera.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index d2e6f82ecfa..560a65aa703 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -403,7 +403,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev) dev_dbg(pcdev->icd->parent, "Activate device\n"); - clk_enable(pcdev->clk); + clk_prepare_enable(pcdev->clk); /* enable CSI before doing anything else */ __raw_writel(csicr1, pcdev->base + CSICR1); @@ -422,7 +422,7 @@ static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev) /* Disable all CSI interface */ __raw_writel(0x00, pcdev->base + CSICR1); - clk_disable(pcdev->clk); + clk_disable_unprepare(pcdev->clk); } /* -- cgit v1.2.3-70-g09d2 From f8afbf3caa991655e989ecd10c135162d84288b2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 25 May 2012 20:14:48 -0300 Subject: [media] video: mx2_camera: Use clk_prepare_enable/clk_disable_unprepare Prepare the clock before enabling it. Cc: Guennadi Liakhovetski Cc: Signed-off-by: Fabio Estevam Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx2_camera.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index 637bde8aca2..2c3ec94769a 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -407,7 +407,7 @@ static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev) { unsigned long flags; - clk_disable(pcdev->clk_csi); + clk_disable_unprepare(pcdev->clk_csi); writel(0, pcdev->base_csi + CSICR1); if (cpu_is_mx27()) { writel(0, pcdev->base_emma + PRP_CNTL); @@ -435,7 +435,7 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) if (pcdev->icd) return -EBUSY; - ret = clk_enable(pcdev->clk_csi); + ret = clk_prepare_enable(pcdev->clk_csi); if (ret < 0) return ret; @@ -1639,7 +1639,7 @@ static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev) goto exit_free_irq; } - clk_enable(pcdev->clk_emma); + clk_prepare_enable(pcdev->clk_emma); err = mx27_camera_emma_prp_reset(pcdev); if (err) @@ -1648,7 +1648,7 @@ static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev) return err; exit_clk_emma_put: - clk_disable(pcdev->clk_emma); + clk_disable_unprepare(pcdev->clk_emma); clk_put(pcdev->clk_emma); exit_free_irq: free_irq(pcdev->irq_emma, pcdev); @@ -1785,7 +1785,7 @@ exit_free_emma: eallocctx: if (cpu_is_mx27()) { free_irq(pcdev->irq_emma, pcdev); - clk_disable(pcdev->clk_emma); + clk_disable_unprepare(pcdev->clk_emma); clk_put(pcdev->clk_emma); iounmap(pcdev->base_emma); release_mem_region(pcdev->res_emma->start, resource_size(pcdev->res_emma)); @@ -1825,7 +1825,7 @@ static int __devexit mx2_camera_remove(struct platform_device *pdev) iounmap(pcdev->base_csi); if (cpu_is_mx27()) { - clk_disable(pcdev->clk_emma); + clk_disable_unprepare(pcdev->clk_emma); clk_put(pcdev->clk_emma); iounmap(pcdev->base_emma); res = pcdev->res_emma; -- cgit v1.2.3-70-g09d2 From ad5b987031835b0ac3064ef12209282277dbae54 Mon Sep 17 00:00:00 2001 From: Javier Martin Date: Wed, 1 Aug 2012 06:16:44 -0300 Subject: [media] media: mx2_camera: Fix clock handling for i.MX27 On i.MX27 two clocks are required: emma-ipg and emma-ahb. The ahb clock has to be requested using both a device and a connection ID. Signed-off-by: Javier Martin [g.liakhovetski@gmx.de: rebase to the current media tree] Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx2_camera.c | 43 +++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index 2c3ec94769a..ac175406e58 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -272,7 +272,7 @@ struct mx2_camera_dev { struct device *dev; struct soc_camera_host soc_host; struct soc_camera_device *icd; - struct clk *clk_csi, *clk_emma; + struct clk *clk_csi, *clk_emma_ahb, *clk_emma_ipg; unsigned int irq_csi, irq_emma; void __iomem *base_csi, *base_emma; @@ -1633,23 +1633,34 @@ static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev) goto exit_iounmap; } - pcdev->clk_emma = clk_get(NULL, "emma"); - if (IS_ERR(pcdev->clk_emma)) { - err = PTR_ERR(pcdev->clk_emma); + pcdev->clk_emma_ipg = clk_get(pcdev->dev, "emma-ipg"); + if (IS_ERR(pcdev->clk_emma_ipg)) { + err = PTR_ERR(pcdev->clk_emma_ipg); goto exit_free_irq; } - clk_prepare_enable(pcdev->clk_emma); + clk_prepare_enable(pcdev->clk_emma_ipg); + + pcdev->clk_emma_ahb = clk_get(pcdev->dev, "emma-ahb"); + if (IS_ERR(pcdev->clk_emma_ahb)) { + err = PTR_ERR(pcdev->clk_emma_ahb); + goto exit_clk_emma_ipg_put; + } + + clk_prepare_enable(pcdev->clk_emma_ahb); err = mx27_camera_emma_prp_reset(pcdev); if (err) - goto exit_clk_emma_put; + goto exit_clk_emma_ahb_put; return err; -exit_clk_emma_put: - clk_disable_unprepare(pcdev->clk_emma); - clk_put(pcdev->clk_emma); +exit_clk_emma_ahb_put: + clk_disable_unprepare(pcdev->clk_emma_ahb); + clk_put(pcdev->clk_emma_ahb); +exit_clk_emma_ipg_put: + clk_disable_unprepare(pcdev->clk_emma_ipg); + clk_put(pcdev->clk_emma_ipg); exit_free_irq: free_irq(pcdev->irq_emma, pcdev); exit_iounmap: @@ -1685,7 +1696,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) goto exit; } - pcdev->clk_csi = clk_get(&pdev->dev, NULL); + pcdev->clk_csi = clk_get(&pdev->dev, "ahb"); if (IS_ERR(pcdev->clk_csi)) { dev_err(&pdev->dev, "Could not get csi clock\n"); err = PTR_ERR(pcdev->clk_csi); @@ -1785,8 +1796,10 @@ exit_free_emma: eallocctx: if (cpu_is_mx27()) { free_irq(pcdev->irq_emma, pcdev); - clk_disable_unprepare(pcdev->clk_emma); - clk_put(pcdev->clk_emma); + clk_disable_unprepare(pcdev->clk_emma_ipg); + clk_put(pcdev->clk_emma_ipg); + clk_disable_unprepare(pcdev->clk_emma_ahb); + clk_put(pcdev->clk_emma_ahb); iounmap(pcdev->base_emma); release_mem_region(pcdev->res_emma->start, resource_size(pcdev->res_emma)); } @@ -1825,8 +1838,10 @@ static int __devexit mx2_camera_remove(struct platform_device *pdev) iounmap(pcdev->base_csi); if (cpu_is_mx27()) { - clk_disable_unprepare(pcdev->clk_emma); - clk_put(pcdev->clk_emma); + clk_disable_unprepare(pcdev->clk_emma_ipg); + clk_put(pcdev->clk_emma_ipg); + clk_disable_unprepare(pcdev->clk_emma_ahb); + clk_put(pcdev->clk_emma_ahb); iounmap(pcdev->base_emma); res = pcdev->res_emma; release_mem_region(res->start, resource_size(res)); -- cgit v1.2.3-70-g09d2 From 991b3137f21e13db4711f313edbe67d49bed795b Mon Sep 17 00:00:00 2001 From: Albert Wang Date: Wed, 1 Aug 2012 02:45:41 -0300 Subject: [media] media: soc_camera: don't clear pix->sizeimage in JPEG mode In JPEG mode, the size of image is variable due to different JPEG compression rate. We only can get the pix->sizeimage from the user. If we clear pix->sizeimage in soc_camera_try_fmt() then we will get it from: ret = soc_mbus_image_size(xlate->host_fmt, pix->bytesperline, pix->height); if (ret < 0) return ret; pix->sizeimage = max_t(u32, pix->sizeimage, ret); In general, this sizeimage will be larger than the actul JPEG image size. But vb2 will check the buffer and size of image in __qbuf_userptr(): /* Check if the provided plane buffer is large enough */ if (planes[plane].length < q->plane_sizes[plane]) So we shouldn't clear the pix->sizeimage and also shouldn't re-calculate the pix->sizeimage in soc_mbus_image_size() in JPEG mode We also shouldn't re-calculate pix->bytesperline: ret = soc_mbus_bytes_per_line(pix->width, xlate->host_fmt); if (ret < 0) return ret; pix->bytesperline = max_t(u32, pix->bytesperline, ret); pix->bytesperline also should be set by the user or by the driver's try_fmt() implementation. Change-Id: I700690a2287346127a624b5260922eaa5427a596 Signed-off-by: Albert Wang Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/soc_camera.c | 3 ++- drivers/media/video/soc_mediabus.c | 6 ++++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index b03ffecb743..1bde255e45d 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -171,7 +171,8 @@ static int soc_camera_try_fmt(struct soc_camera_device *icd, dev_dbg(icd->pdev, "TRY_FMT(%c%c%c%c, %ux%u)\n", pixfmtstr(pix->pixelformat), pix->width, pix->height); - if (!(ici->capabilities & SOCAM_HOST_CAP_STRIDE)) { + if (pix->pixelformat != V4L2_PIX_FMT_JPEG && + !(ici->capabilities & SOCAM_HOST_CAP_STRIDE)) { pix->bytesperline = 0; pix->sizeimage = 0; } diff --git a/drivers/media/video/soc_mediabus.c b/drivers/media/video/soc_mediabus.c index 89dce097a82..a397812635d 100644 --- a/drivers/media/video/soc_mediabus.c +++ b/drivers/media/video/soc_mediabus.c @@ -378,6 +378,9 @@ EXPORT_SYMBOL(soc_mbus_samples_per_pixel); s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf) { + if (mf->fourcc == V4L2_PIX_FMT_JPEG) + return 0; + if (mf->layout != SOC_MBUS_LAYOUT_PACKED) return width * mf->bits_per_sample / 8; @@ -400,6 +403,9 @@ EXPORT_SYMBOL(soc_mbus_bytes_per_line); s32 soc_mbus_image_size(const struct soc_mbus_pixelfmt *mf, u32 bytes_per_line, u32 height) { + if (mf->fourcc == V4L2_PIX_FMT_JPEG) + return 0; + if (mf->layout == SOC_MBUS_LAYOUT_PACKED) return bytes_per_line * height; -- cgit v1.2.3-70-g09d2 From 89dd86db78e08b51bab29e168fd41b2fd943e6b6 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Mon, 13 Aug 2012 08:15:06 +0000 Subject: mlx4_core: Allow large mlx4_buddy bitmaps mlx4_buddy_init uses kmalloc() to allocate bitmaps, which fails when the required size is beyond the max supported value (or when memory is too fragmented to handle a huge allocation). Extend this to use use vmalloc() if kmalloc() fails, and take that into account when freeing the bitmaps as well. This fixes a driver load failure when log num mtt is 26 or higher, and is a step in the direction of allowing to register huge amounts of memory on large memory systems. Signed-off-by: Yishai Hadas Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx4/mr.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index af55b7ce534..d6a3a392a37 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -37,6 +37,7 @@ #include #include #include +#include #include @@ -130,8 +131,11 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order) for (i = 0; i <= buddy->max_order; ++i) { s = BITS_TO_LONGS(1 << (buddy->max_order - i)); buddy->bits[i] = kmalloc(s * sizeof (long), GFP_KERNEL); - if (!buddy->bits[i]) - goto err_out_free; + if (!buddy->bits[i]) { + buddy->bits[i] = vmalloc(s * sizeof(long)); + if (!buddy->bits[i]) + goto err_out_free; + } bitmap_zero(buddy->bits[i], 1 << (buddy->max_order - i)); } @@ -142,7 +146,10 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order) err_out_free: for (i = 0; i <= buddy->max_order; ++i) - kfree(buddy->bits[i]); + if (buddy->bits[i] && is_vmalloc_addr(buddy->bits[i])) + vfree(buddy->bits[i]); + else + kfree(buddy->bits[i]); err_out: kfree(buddy->bits); @@ -156,7 +163,10 @@ static void mlx4_buddy_cleanup(struct mlx4_buddy *buddy) int i; for (i = 0; i <= buddy->max_order; ++i) - kfree(buddy->bits[i]); + if (is_vmalloc_addr(buddy->bits[i])) + vfree(buddy->bits[i]); + else + kfree(buddy->bits[i]); kfree(buddy->bits); kfree(buddy->num_free); -- cgit v1.2.3-70-g09d2 From 3de819e6b642fdd51904f5f4d2716d7466a2f7f5 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Mon, 13 Aug 2012 08:15:07 +0000 Subject: mlx4_core: Fix integer overflow issues around MTT table Fix some issues around int variables used in data structures related to memory registration. Handle int overflow in mlx4_init_icm_table by using a u64 intermediate variable and changing struct mlx4_icm_table num_obj field to be u32. Change some more fields/variables to use u32 instead of int to prevent a case where the variable becomes negative when bit 31 is set. Also subtract log_mtts_per_seg from the exponent when computing num_mtt, since its added later on in that very same code area. This and the previous commit fixes some issues which actually prevent commit db5a7a65c058 ("mlx4_core: Scale size of MTT table with system RAM") from working. Now, when the number of MTTs is scaled with the size of the RAM we can map up to 8TB. Signed-off-by: Yishai Hadas Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx4/icm.c | 9 ++++++--- drivers/net/ethernet/mellanox/mlx4/icm.h | 2 +- drivers/net/ethernet/mellanox/mlx4/mlx4.h | 4 ++-- drivers/net/ethernet/mellanox/mlx4/mr.c | 4 ++-- drivers/net/ethernet/mellanox/mlx4/profile.c | 4 ++-- 5 files changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.c b/drivers/net/ethernet/mellanox/mlx4/icm.c index 88b7b3e75ab..daf41792366 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.c +++ b/drivers/net/ethernet/mellanox/mlx4/icm.c @@ -358,13 +358,14 @@ void mlx4_table_put_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, } int mlx4_init_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table, - u64 virt, int obj_size, int nobj, int reserved, + u64 virt, int obj_size, u32 nobj, int reserved, int use_lowmem, int use_coherent) { int obj_per_chunk; int num_icm; unsigned chunk_size; int i; + u64 size; obj_per_chunk = MLX4_TABLE_CHUNK_SIZE / obj_size; num_icm = (nobj + obj_per_chunk - 1) / obj_per_chunk; @@ -380,10 +381,12 @@ int mlx4_init_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table, table->coherent = use_coherent; mutex_init(&table->mutex); + size = (u64) nobj * obj_size; for (i = 0; i * MLX4_TABLE_CHUNK_SIZE < reserved * obj_size; ++i) { chunk_size = MLX4_TABLE_CHUNK_SIZE; - if ((i + 1) * MLX4_TABLE_CHUNK_SIZE > nobj * obj_size) - chunk_size = PAGE_ALIGN(nobj * obj_size - i * MLX4_TABLE_CHUNK_SIZE); + if ((i + 1) * MLX4_TABLE_CHUNK_SIZE > size) + chunk_size = PAGE_ALIGN(size - + i * MLX4_TABLE_CHUNK_SIZE); table->icm[i] = mlx4_alloc_icm(dev, chunk_size >> PAGE_SHIFT, (use_lowmem ? GFP_KERNEL : GFP_HIGHUSER) | diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.h b/drivers/net/ethernet/mellanox/mlx4/icm.h index 19e4efc0b34..a67744f5350 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.h +++ b/drivers/net/ethernet/mellanox/mlx4/icm.h @@ -78,7 +78,7 @@ int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, void mlx4_table_put_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, int start, int end); int mlx4_init_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table, - u64 virt, int obj_size, int nobj, int reserved, + u64 virt, int obj_size, u32 nobj, int reserved, int use_lowmem, int use_coherent); void mlx4_cleanup_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table); void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_handle); diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index 59ebc033963..4d9df8f2a12 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -249,7 +249,7 @@ struct mlx4_bitmap { struct mlx4_buddy { unsigned long **bits; unsigned int *num_free; - int max_order; + u32 max_order; spinlock_t lock; }; @@ -258,7 +258,7 @@ struct mlx4_icm; struct mlx4_icm_table { u64 virt; int num_icm; - int num_obj; + u32 num_obj; int obj_size; int lowmem; int coherent; diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index d6a3a392a37..44b8e1ea1cd 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -678,7 +678,7 @@ int mlx4_init_mr_table(struct mlx4_dev *dev) return err; err = mlx4_buddy_init(&mr_table->mtt_buddy, - ilog2(dev->caps.num_mtts / + ilog2((u32)dev->caps.num_mtts / (1 << log_mtts_per_seg))); if (err) goto err_buddy; @@ -688,7 +688,7 @@ int mlx4_init_mr_table(struct mlx4_dev *dev) mlx4_alloc_mtt_range(dev, fls(dev->caps.reserved_mtts - 1)); if (priv->reserved_mtts < 0) { - mlx4_warn(dev, "MTT table of order %d is too small.\n", + mlx4_warn(dev, "MTT table of order %u is too small.\n", mr_table->mtt_buddy.max_order); err = -ENOMEM; goto err_reserve_mtts; diff --git a/drivers/net/ethernet/mellanox/mlx4/profile.c b/drivers/net/ethernet/mellanox/mlx4/profile.c index 9ee4725363d..8e0c3cc2a1e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/profile.c +++ b/drivers/net/ethernet/mellanox/mlx4/profile.c @@ -76,7 +76,7 @@ u64 mlx4_make_profile(struct mlx4_dev *dev, u64 size; u64 start; int type; - int num; + u32 num; int log_num; }; @@ -105,7 +105,7 @@ u64 mlx4_make_profile(struct mlx4_dev *dev, si_meminfo(&si); request->num_mtt = roundup_pow_of_two(max_t(unsigned, request->num_mtt, - min(1UL << 31, + min(1UL << (31 - log_mtts_per_seg), si.totalram >> (log_mtts_per_seg - 1)))); profile[MLX4_RES_QP].size = dev_cap->qpc_entry_sz; -- cgit v1.2.3-70-g09d2 From 96f17d590092ae2511adf599a252e8ed1901b7a4 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 14 Aug 2012 15:17:10 -0700 Subject: mlx4_core: Clean up buddy bitmap allocation - Use kcalloc() / vzalloc() instead of an extra bitmap_zero(). - Add __GFP_NOWARN to kcalloc() since we'll try vzalloc() if it fails. Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx4/mr.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index 44b8e1ea1cd..c202d3ad2a0 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -121,7 +121,7 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order) buddy->max_order = max_order; spin_lock_init(&buddy->lock); - buddy->bits = kzalloc((buddy->max_order + 1) * sizeof (long *), + buddy->bits = kcalloc(buddy->max_order + 1, sizeof (long *), GFP_KERNEL); buddy->num_free = kcalloc((buddy->max_order + 1), sizeof *buddy->num_free, GFP_KERNEL); @@ -130,13 +130,12 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order) for (i = 0; i <= buddy->max_order; ++i) { s = BITS_TO_LONGS(1 << (buddy->max_order - i)); - buddy->bits[i] = kmalloc(s * sizeof (long), GFP_KERNEL); + buddy->bits[i] = kcalloc(s, sizeof (long), GFP_KERNEL | __GFP_NOWARN); if (!buddy->bits[i]) { - buddy->bits[i] = vmalloc(s * sizeof(long)); + buddy->bits[i] = vzalloc(s * sizeof(long)); if (!buddy->bits[i]) goto err_out_free; } - bitmap_zero(buddy->bits[i], 1 << (buddy->max_order - i)); } set_bit(0, buddy->bits[buddy->max_order]); -- cgit v1.2.3-70-g09d2 From e862f1a9b7df4e8196ebec45ac62295138aa3fc2 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:44 +0000 Subject: atm: fix info leak in getsockopt(SO_ATMPVC) The ATM code fails to initialize the two padding bytes of struct sockaddr_atmpvc inserted for alignment. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/atm/common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/atm/common.c b/net/atm/common.c index b4b44dbed64..0c0ad930a63 100644 --- a/net/atm/common.c +++ b/net/atm/common.c @@ -812,6 +812,7 @@ int vcc_getsockopt(struct socket *sock, int level, int optname, if (!vcc->dev || !test_bit(ATM_VF_ADDR, &vcc->flags)) return -ENOTCONN; + memset(&pvc, 0, sizeof(pvc)); pvc.sap_family = AF_ATMPVC; pvc.sap_addr.itf = vcc->dev->number; pvc.sap_addr.vpi = vcc->vpi; -- cgit v1.2.3-70-g09d2 From 3c0c5cfdcd4d69ffc4b9c0907cec99039f30a50a Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:45 +0000 Subject: atm: fix info leak via getsockname() The ATM code fails to initialize the two padding bytes of struct sockaddr_atmpvc inserted for alignment. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/atm/pvc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/atm/pvc.c b/net/atm/pvc.c index 3a734919c36..ae032402140 100644 --- a/net/atm/pvc.c +++ b/net/atm/pvc.c @@ -95,6 +95,7 @@ static int pvc_getname(struct socket *sock, struct sockaddr *sockaddr, return -ENOTCONN; *sockaddr_len = sizeof(struct sockaddr_atmpvc); addr = (struct sockaddr_atmpvc *)sockaddr; + memset(addr, 0, sizeof(*addr)); addr->sap_family = AF_ATMPVC; addr->sap_addr.itf = vcc->dev->number; addr->sap_addr.vpi = vcc->vpi; -- cgit v1.2.3-70-g09d2 From e15ca9a0ef9a86f0477530b0f44a725d67f889ee Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:46 +0000 Subject: Bluetooth: HCI - Fix info leak in getsockopt(HCI_FILTER) The HCI code fails to initialize the two padding bytes of struct hci_ufilter before copying it to userland -- that for leaking two bytes kernel stack. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/hci_sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index a7f04de03d7..a27bbc3cd4b 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -1009,6 +1009,7 @@ static int hci_sock_getsockopt(struct socket *sock, int level, int optname, { struct hci_filter *f = &hci_pi(sk)->filter; + memset(&uf, 0, sizeof(uf)); uf.type_mask = f->type_mask; uf.opcode = f->opcode; uf.event_mask[0] = *((u32 *) f->event_mask + 0); -- cgit v1.2.3-70-g09d2 From 3f68ba07b1da811bf383b4b701b129bfcb2e4988 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:47 +0000 Subject: Bluetooth: HCI - Fix info leak via getsockname() The HCI code fails to initialize the hci_channel member of struct sockaddr_hci and that for leaks two bytes kernel stack via the getsockname() syscall. Initialize hci_channel with 0 to avoid the info leak. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/hci_sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index a27bbc3cd4b..19fdac78e55 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -694,6 +694,7 @@ static int hci_sock_getname(struct socket *sock, struct sockaddr *addr, *addr_len = sizeof(*haddr); haddr->hci_family = AF_BLUETOOTH; haddr->hci_dev = hdev->id; + haddr->hci_channel= 0; release_sock(sk); return 0; -- cgit v1.2.3-70-g09d2 From 9ad2de43f1aee7e7274a4e0d41465489299e344b Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:48 +0000 Subject: Bluetooth: RFCOMM - Fix info leak in getsockopt(BT_SECURITY) The RFCOMM code fails to initialize the key_size member of struct bt_security before copying it to userland -- that for leaking one byte kernel stack. Initialize key_size with 0 to avoid the info leak. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/rfcomm/sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 7e1e59645c0..64f55ca6147 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -822,6 +822,7 @@ static int rfcomm_sock_getsockopt(struct socket *sock, int level, int optname, c } sec.level = rfcomm_pi(sk)->sec_level; + sec.key_size = 0; len = min_t(unsigned int, len, sizeof(sec)); if (copy_to_user(optval, (char *) &sec, len)) -- cgit v1.2.3-70-g09d2 From f9432c5ec8b1e9a09b9b0e5569e3c73db8de432a Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:49 +0000 Subject: Bluetooth: RFCOMM - Fix info leak in ioctl(RFCOMMGETDEVLIST) The RFCOMM code fails to initialize the two padding bytes of struct rfcomm_dev_list_req inserted for alignment before copying it to userland. Additionally there are two padding bytes in each instance of struct rfcomm_dev_info. The ioctl() that for disclosures two bytes plus dev_num times two bytes uninitialized kernel heap memory. Allocate the memory using kzalloc() to fix this issue. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/rfcomm/tty.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index cb960773c00..56f182393c4 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -456,7 +456,7 @@ static int rfcomm_get_dev_list(void __user *arg) size = sizeof(*dl) + dev_num * sizeof(*di); - dl = kmalloc(size, GFP_KERNEL); + dl = kzalloc(size, GFP_KERNEL); if (!dl) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From 9344a972961d1a6d2c04d9008b13617bcb6ec2ef Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:50 +0000 Subject: Bluetooth: RFCOMM - Fix info leak via getsockname() The RFCOMM code fails to initialize the trailing padding byte of struct sockaddr_rc added for alignment. It that for leaks one byte kernel stack via the getsockname() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/rfcomm/sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 64f55ca6147..1a17850d093 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -528,6 +528,7 @@ static int rfcomm_sock_getname(struct socket *sock, struct sockaddr *addr, int * BT_DBG("sock %p, sk %p", sock, sk); + memset(sa, 0, sizeof(*sa)); sa->rc_family = AF_BLUETOOTH; sa->rc_channel = rfcomm_pi(sk)->channel; if (peer) -- cgit v1.2.3-70-g09d2 From 792039c73cf176c8e39a6e8beef2c94ff46522ed Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:51 +0000 Subject: Bluetooth: L2CAP - Fix info leak via getsockname() The L2CAP code fails to initialize the l2_bdaddr_type member of struct sockaddr_l2 and the padding byte added for alignment. It that for leaks two bytes kernel stack via the getsockname() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/l2cap_sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index b94abd30e6f..1497edd191a 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -245,6 +245,7 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr, int *l BT_DBG("sock %p, sk %p", sock, sk); + memset(la, 0, sizeof(struct sockaddr_l2)); addr->sa_family = AF_BLUETOOTH; *len = sizeof(struct sockaddr_l2); -- cgit v1.2.3-70-g09d2 From 04d4fbca1017c11381e7d82acea21dd741e748bc Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:52 +0000 Subject: l2tp: fix info leak via getsockname() The L2TP code for IPv6 fails to initialize the l2tp_unused member of struct sockaddr_l2tpip6 and that for leaks two bytes kernel stack via the getsockname() syscall. Initialize l2tp_unused with 0 to avoid the info leak. Signed-off-by: Mathias Krause Cc: James Chapman Signed-off-by: David S. Miller --- net/l2tp/l2tp_ip6.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index 35e1e4bde58..927547171bc 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -410,6 +410,7 @@ static int l2tp_ip6_getname(struct socket *sock, struct sockaddr *uaddr, lsa->l2tp_family = AF_INET6; lsa->l2tp_flowinfo = 0; lsa->l2tp_scope_id = 0; + lsa->l2tp_unused = 0; if (peer) { if (!lsk->peer_conn_id) return -ENOTCONN; -- cgit v1.2.3-70-g09d2 From 3592aaeb80290bda0f2cf0b5456c97bfc638b192 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:53 +0000 Subject: llc: fix info leak via getsockname() The LLC code wrongly returns 0, i.e. "success", when the socket is zapped. Together with the uninitialized uaddrlen pointer argument from sys_getsockname this leads to an arbitrary memory leak of up to 128 bytes kernel stack via the getsockname() syscall. Return an error instead when the socket is zapped to prevent the info leak. Also remove the unnecessary memset(0). We don't directly write to the memory pointed by uaddr but memcpy() a local structure at the end of the function that is properly initialized. Signed-off-by: Mathias Krause Cc: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- net/llc/af_llc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 8c2919ca36f..c2190005a11 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -969,14 +969,13 @@ static int llc_ui_getname(struct socket *sock, struct sockaddr *uaddr, struct sockaddr_llc sllc; struct sock *sk = sock->sk; struct llc_sock *llc = llc_sk(sk); - int rc = 0; + int rc = -EBADF; memset(&sllc, 0, sizeof(sllc)); lock_sock(sk); if (sock_flag(sk, SOCK_ZAPPED)) goto out; *uaddrlen = sizeof(sllc); - memset(uaddr, 0, *uaddrlen); if (peer) { rc = -ENOTCONN; if (sk->sk_state != TCP_ESTABLISHED) -- cgit v1.2.3-70-g09d2 From 276bdb82dedb290511467a5a4fdbe9f0b52dce6f Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:54 +0000 Subject: dccp: check ccid before dereferencing ccid_hc_rx_getsockopt() and ccid_hc_tx_getsockopt() might be called with a NULL ccid pointer leading to a NULL pointer dereference. This could lead to a privilege escalation if the attacker is able to map page 0 and prepare it with a fake ccid_ops pointer. Signed-off-by: Mathias Krause Cc: Gerrit Renker Cc: stable@vger.kernel.org Signed-off-by: David S. Miller --- net/dccp/ccid.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h index 75c3582a767..fb85d371a8d 100644 --- a/net/dccp/ccid.h +++ b/net/dccp/ccid.h @@ -246,7 +246,7 @@ static inline int ccid_hc_rx_getsockopt(struct ccid *ccid, struct sock *sk, u32 __user *optval, int __user *optlen) { int rc = -ENOPROTOOPT; - if (ccid->ccid_ops->ccid_hc_rx_getsockopt != NULL) + if (ccid != NULL && ccid->ccid_ops->ccid_hc_rx_getsockopt != NULL) rc = ccid->ccid_ops->ccid_hc_rx_getsockopt(sk, optname, len, optval, optlen); return rc; @@ -257,7 +257,7 @@ static inline int ccid_hc_tx_getsockopt(struct ccid *ccid, struct sock *sk, u32 __user *optval, int __user *optlen) { int rc = -ENOPROTOOPT; - if (ccid->ccid_ops->ccid_hc_tx_getsockopt != NULL) + if (ccid != NULL && ccid->ccid_ops->ccid_hc_tx_getsockopt != NULL) rc = ccid->ccid_ops->ccid_hc_tx_getsockopt(sk, optname, len, optval, optlen); return rc; -- cgit v1.2.3-70-g09d2 From 7b07f8eb75aa3097cdfd4f6eac3da49db787381d Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:55 +0000 Subject: dccp: fix info leak via getsockopt(DCCP_SOCKOPT_CCID_TX_INFO) The CCID3 code fails to initialize the trailing padding bytes of struct tfrc_tx_info added for alignment on 64 bit architectures. It that for potentially leaks four bytes kernel stack via the getsockopt() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Cc: Gerrit Renker Signed-off-by: David S. Miller --- net/dccp/ccids/ccid3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index d65e98798ec..119c04317d4 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -535,6 +535,7 @@ static int ccid3_hc_tx_getsockopt(struct sock *sk, const int optname, int len, case DCCP_SOCKOPT_CCID_TX_INFO: if (len < sizeof(tfrc)) return -EINVAL; + memset(&tfrc, 0, sizeof(tfrc)); tfrc.tfrctx_x = hc->tx_x; tfrc.tfrctx_x_recv = hc->tx_x_recv; tfrc.tfrctx_x_calc = hc->tx_x_calc; -- cgit v1.2.3-70-g09d2 From 2d8a041b7bfe1097af21441cb77d6af95f4f4680 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:56 +0000 Subject: ipvs: fix info leak in getsockopt(IP_VS_SO_GET_TIMEOUT) If at least one of CONFIG_IP_VS_PROTO_TCP or CONFIG_IP_VS_PROTO_UDP is not set, __ip_vs_get_timeouts() does not fully initialize the structure that gets copied to userland and that for leaks up to 12 bytes of kernel stack. Add an explicit memset(0) before passing the structure to __ip_vs_get_timeouts() to avoid the info leak. Signed-off-by: Mathias Krause Cc: Wensong Zhang Cc: Simon Horman Cc: Julian Anastasov Signed-off-by: David S. Miller --- net/netfilter/ipvs/ip_vs_ctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 84444dda194..72bf32a8487 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2759,6 +2759,7 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len) { struct ip_vs_timeout_user t; + memset(&t, 0, sizeof(t)); __ip_vs_get_timeouts(net, &t); if (copy_to_user(user, &t, sizeof(t)) != 0) ret = -EFAULT; -- cgit v1.2.3-70-g09d2 From 43da5f2e0d0c69ded3d51907d9552310a6b545e8 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:57 +0000 Subject: net: fix info leak in compat dev_ifconf() The implementation of dev_ifconf() for the compat ioctl interface uses an intermediate ifc structure allocated in userland for the duration of the syscall. Though, it fails to initialize the padding bytes inserted for alignment and that for leaks four bytes of kernel stack. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/socket.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/socket.c b/net/socket.c index dfe5b66c97e..a5471f804d9 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2657,6 +2657,7 @@ static int dev_ifconf(struct net *net, struct compat_ifconf __user *uifc32) if (copy_from_user(&ifc32, uifc32, sizeof(struct compat_ifconf))) return -EFAULT; + memset(&ifc, 0, sizeof(ifc)); if (ifc32.ifcbuf == 0) { ifc32.ifc_len = 0; ifc.ifc_len = 0; -- cgit v1.2.3-70-g09d2 From e9ba389c5ffc4dd29dfe17e00e48877302111135 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 15 Aug 2012 12:32:00 +0200 Subject: ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream A PCM capture stream on usb-audio causes a scheduling-while-atomic BUG, as reported in the bugzilla entry below. It's because snd_usb_endpoint_start() is called at first at trigger START for a capture stream, and this function contains the left-over EP deactivation codes. The problem doesn't happen for a playback stream because the function is called at PCM prepare time, which can sleep. This patch fixes the BUG by moving the EP deactivation code into the PCM prepare callback. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46011 Cc: [v3.5+] Signed-off-by: Takashi Iwai --- sound/usb/endpoint.c | 4 ---- sound/usb/pcm.c | 3 +++ 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 0f647d22cb4..c4118120268 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -821,10 +821,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) if (++ep->use_count != 1) return 0; - /* just to be sure */ - deactivate_urbs(ep, 0, 1); - wait_clear_urbs(ep); - ep->active_mask = 0; ep->unlink_mask = 0; ep->phase = 0; diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index a1298f37942..62ec808ed79 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -544,6 +544,9 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) subs->last_frame_number = 0; runtime->delay = 0; + /* clear the pending deactivation on the target EPs */ + deactivate_endpoints(subs); + /* for playback, submit the URBs now; otherwise, the first hwptr_done * updates for all URBs would happen at the same time when starting */ if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) -- cgit v1.2.3-70-g09d2 From 667a5313ecd7308d79629c0738b0db588b0b0a4e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 16 Aug 2012 16:46:12 +1000 Subject: md: Don't truncate size at 4TB for RAID0 and Linear commit 27a7b260f71439c40546b43588448faac01adb93 md: Fix handling for devices from 2TB to 4TB in 0.90 metadata. changed 0.90 metadata handling to truncated size to 4TB as that is all that 0.90 can record. However for RAID0 and Linear, 0.90 doesn't need to record the size, so this truncation is not needed and causes working arrays to become too small. So avoid the truncation for RAID0 and Linear This bug was introduced in 3.1 and is suitable for any stable kernels from then onwards. As the offending commit was tagged for 'stable', any stable kernel that it was applied to should also get this patch. That includes at least 2.6.32, 2.6.33 and 3.0. (Thanks to Ben Hutchings for providing that list). Cc: stable@vger.kernel.org Signed-off-by: Neil Brown --- drivers/md/md.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index fcd098794d3..3f6203a4c7e 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1108,8 +1108,11 @@ static int super_90_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor ret = 0; } rdev->sectors = rdev->sb_start; - /* Limit to 4TB as metadata cannot record more than that */ - if (rdev->sectors >= (2ULL << 32)) + /* Limit to 4TB as metadata cannot record more than that. + * (not needed for Linear and RAID0 as metadata doesn't + * record this size) + */ + if (rdev->sectors >= (2ULL << 32) && sb->level >= 1) rdev->sectors = (2ULL << 32) - 2; if (rdev->sectors < ((sector_t)sb->size) * 2 && sb->level >= 1) @@ -1400,7 +1403,7 @@ super_90_rdev_size_change(struct md_rdev *rdev, sector_t num_sectors) /* Limit to 4TB as metadata cannot record more than that. * 4TB == 2^32 KB, or 2*2^32 sectors. */ - if (num_sectors >= (2ULL << 32)) + if (num_sectors >= (2ULL << 32) && rdev->mddev->level >= 1) num_sectors = (2ULL << 32) - 2; md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size, rdev->sb_page); -- cgit v1.2.3-70-g09d2 From 2614f86490122bf51eb7c12ec73927f1900f4e7d Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 16 Aug 2012 02:25:24 +0200 Subject: netfilter: nf_ct_expect: fix possible access to uninitialized timer In __nf_ct_expect_check, the function refresh_timer returns 1 if a matching expectation is found and its timer is successfully refreshed. This results in nf_ct_expect_related returning 0. Note that at this point: - the passed expectation is not inserted in the expectation table and its timer was not initialized, since we have refreshed one matching/existing expectation. - nf_ct_expect_alloc uses kmem_cache_alloc, so the expectation timer is in some undefined state just after the allocation, until it is appropriately initialized. This can be a problem for the SIP helper during the expectation addition: ... if (nf_ct_expect_related(rtp_exp) == 0) { if (nf_ct_expect_related(rtcp_exp) != 0) nf_ct_unexpect_related(rtp_exp); ... Note that nf_ct_expect_related(rtp_exp) may return 0 for the timer refresh case that is detailed above. Then, if nf_ct_unexpect_related(rtcp_exp) returns != 0, nf_ct_unexpect_related(rtp_exp) is called, which does: spin_lock_bh(&nf_conntrack_lock); if (del_timer(&exp->timeout)) { nf_ct_unlink_expect(exp); nf_ct_expect_put(exp); } spin_unlock_bh(&nf_conntrack_lock); Note that del_timer always returns false if the timer has been initialized. However, the timer was not initialized since setup_timer was not called, therefore, the expectation timer remains in some undefined state. If I'm not missing anything, this may lead to the removal an unexistent expectation. To fix this, the optimization that allows refreshing an expectation is removed. Now nf_conntrack_expect_related looks more consistent to me since it always add the expectation in case that it returns success. Thanks to Patrick McHardy for participating in the discussion of this patch. I think this may be the source of the problem described by: http://marc.info/?l=netfilter-devel&m=134073514719421&w=2 Reported-by: Rafal Fitt Acked-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_expect.c | 29 ++++++----------------------- 1 file changed, 6 insertions(+), 23 deletions(-) diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index 45cf602a76b..527651a53a4 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -361,23 +361,6 @@ static void evict_oldest_expect(struct nf_conn *master, } } -static inline int refresh_timer(struct nf_conntrack_expect *i) -{ - struct nf_conn_help *master_help = nfct_help(i->master); - const struct nf_conntrack_expect_policy *p; - - if (!del_timer(&i->timeout)) - return 0; - - p = &rcu_dereference_protected( - master_help->helper, - lockdep_is_held(&nf_conntrack_lock) - )->expect_policy[i->class]; - i->timeout.expires = jiffies + p->timeout * HZ; - add_timer(&i->timeout); - return 1; -} - static inline int __nf_ct_expect_check(struct nf_conntrack_expect *expect) { const struct nf_conntrack_expect_policy *p; @@ -386,7 +369,7 @@ static inline int __nf_ct_expect_check(struct nf_conntrack_expect *expect) struct nf_conn_help *master_help = nfct_help(master); struct nf_conntrack_helper *helper; struct net *net = nf_ct_exp_net(expect); - struct hlist_node *n; + struct hlist_node *n, *next; unsigned int h; int ret = 1; @@ -395,12 +378,12 @@ static inline int __nf_ct_expect_check(struct nf_conntrack_expect *expect) goto out; } h = nf_ct_expect_dst_hash(&expect->tuple); - hlist_for_each_entry(i, n, &net->ct.expect_hash[h], hnode) { + hlist_for_each_entry_safe(i, n, next, &net->ct.expect_hash[h], hnode) { if (expect_matches(i, expect)) { - /* Refresh timer: if it's dying, ignore.. */ - if (refresh_timer(i)) { - ret = 0; - goto out; + if (del_timer(&i->timeout)) { + nf_ct_unlink_expect(i); + nf_ct_expect_put(i); + break; } } else if (expect_clash(i, expect)) { ret = -EBUSY; -- cgit v1.2.3-70-g09d2 From 04f995a544d1289ffb8108849cd71b1325c5af6a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 6 Aug 2012 00:03:28 +0000 Subject: KVM: PPC: Book3S HV: Fix incorrect branch in H_CEDE code In handling the H_CEDE hypercall, if this vcpu has already been prodded (with the H_PROD hypercall, which Linux guests don't in fact use), we branch to a numeric label '1f'. Unfortunately there is another '1:' label before the one that we want to jump to. This fixes the problem by using a textual label, 'kvm_cede_prodded'. It also changes the label for another longish branch from '2:' to 'kvm_cede_exit' to avoid a possible future problem if code modifications add another numeric '2:' label in between. Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 5a84c8d3d04..44b72feaff7 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1421,13 +1421,13 @@ _GLOBAL(kvmppc_h_cede) sync /* order setting ceded vs. testing prodded */ lbz r5,VCPU_PRODDED(r3) cmpwi r5,0 - bne 1f + bne kvm_cede_prodded li r0,0 /* set trap to 0 to say hcall is handled */ stw r0,VCPU_TRAP(r3) li r0,H_SUCCESS std r0,VCPU_GPR(R3)(r3) BEGIN_FTR_SECTION - b 2f /* just send it up to host on 970 */ + b kvm_cede_exit /* just send it up to host on 970 */ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) /* @@ -1446,7 +1446,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) or r4,r4,r0 PPC_POPCNTW(R7,R4) cmpw r7,r8 - bge 2f + bge kvm_cede_exit stwcx. r4,0,r6 bne 31b li r0,1 @@ -1555,7 +1555,8 @@ kvm_end_cede: b hcall_real_fallback /* cede when already previously prodded case */ -1: li r0,0 +kvm_cede_prodded: + li r0,0 stb r0,VCPU_PRODDED(r3) sync /* order testing prodded vs. clearing ceded */ stb r0,VCPU_CEDED(r3) @@ -1563,7 +1564,8 @@ kvm_end_cede: blr /* we've ceded but we want to give control to the host */ -2: li r3,H_TOO_HARD +kvm_cede_exit: + li r3,H_TOO_HARD blr secondary_too_late: -- cgit v1.2.3-70-g09d2 From 249ba1ee0f8fcb4e40caa5fbea11dafde201cc46 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Fri, 3 Aug 2012 13:56:33 +0200 Subject: KVM: PPC: Add cache flush on page map When we map a page that wasn't icache cleared before, do so when first mapping it in KVM using the same information bits as the Linux mapping logic. That way we are 100% sure that any page we map does not have stale entries in the icache. Signed-off-by: Alexander Graf --- arch/powerpc/include/asm/kvm_host.h | 1 + arch/powerpc/include/asm/kvm_ppc.h | 12 ++++++++++++ arch/powerpc/kvm/book3s_32_mmu_host.c | 3 +++ arch/powerpc/kvm/book3s_64_mmu_host.c | 2 ++ arch/powerpc/kvm/e500_tlb.c | 3 +++ arch/powerpc/mm/mem.c | 1 + 6 files changed, 22 insertions(+) diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 50ea12fd7bf..a8bf5c673a3 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -33,6 +33,7 @@ #include #include #include +#include #define KVM_MAX_VCPUS NR_CPUS #define KVM_MAX_VCORES NR_CPUS diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 0124937a23b..e006f0bdea9 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -219,4 +219,16 @@ void kvmppc_claim_lpid(long lpid); void kvmppc_free_lpid(long lpid); void kvmppc_init_lpid(unsigned long nr_lpids); +static inline void kvmppc_mmu_flush_icache(pfn_t pfn) +{ + /* Clear i-cache for new pages */ + struct page *page; + page = pfn_to_page(pfn); + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } +} + + #endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c index f922c29bb23..837f13e7b6b 100644 --- a/arch/powerpc/kvm/book3s_32_mmu_host.c +++ b/arch/powerpc/kvm/book3s_32_mmu_host.c @@ -211,6 +211,9 @@ next_pteg: pteg1 |= PP_RWRX; } + if (orig_pte->may_execute) + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); + local_irq_disable(); if (pteg[rr]) { diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index 10fc8ec9d2a..0688b6b3958 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -126,6 +126,8 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte) if (!orig_pte->may_execute) rflags |= HPTE_R_N; + else + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M); diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index c510fc96130..fb3bb3ad8b3 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -539,6 +539,9 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize, ref, gvaddr, stlbe); + + /* Clear i-cache for new pages */ + kvmppc_mmu_flush_icache(pfn); } /* XXX only map the one-one case, for now use TLB0 */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index baaafde7d13..fbdad0e3929 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -469,6 +469,7 @@ void flush_dcache_icache_page(struct page *page) __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); #endif } +EXPORT_SYMBOL(flush_dcache_icache_page); void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { -- cgit v1.2.3-70-g09d2 From e8143ccb6b501f78bb95d9c5ee100d18423008cf Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 14 Aug 2012 12:10:09 +0000 Subject: ppc: e500_tlb memset clears nothing Put the parameters the right way around Addresses https://bugzilla.kernel.org/show_bug.cgi?id=44031 Reported-by: David Binderman Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Alexander Graf --- arch/powerpc/kvm/e500_tlb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index fb3bb3ad8b3..a2b66717813 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -322,11 +322,11 @@ static inline void kvmppc_e500_ref_release(struct tlbe_ref *ref) static void clear_tlb1_bitmap(struct kvmppc_vcpu_e500 *vcpu_e500) { if (vcpu_e500->g2h_tlb1_map) - memset(vcpu_e500->g2h_tlb1_map, - sizeof(u64) * vcpu_e500->gtlb_params[1].entries, 0); + memset(vcpu_e500->g2h_tlb1_map, 0, + sizeof(u64) * vcpu_e500->gtlb_params[1].entries); if (vcpu_e500->h2g_tlb1_rmap) - memset(vcpu_e500->h2g_tlb1_rmap, - sizeof(unsigned int) * host_tlb_params[1].entries, 0); + memset(vcpu_e500->h2g_tlb1_rmap, 0, + sizeof(unsigned int) * host_tlb_params[1].entries); } static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500) -- cgit v1.2.3-70-g09d2 From 5e68fb3cab23b327e9f15803607e697d7eea1966 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Thu, 16 Aug 2012 14:11:09 +0200 Subject: ALSA: hda - Don't send invalid volume knob command on IDT 92hd75bxx Instead of blindly initializing a volume knob widget, first check that there actually is a volume knob widget. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 94040ccf8e8..ea5775a1a7d 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4272,7 +4272,8 @@ static int stac92xx_init(struct hda_codec *codec) unsigned int gpio; int i; - snd_hda_sequence_write(codec, spec->init); + if (spec->init) + snd_hda_sequence_write(codec, spec->init); /* power down adcs initially */ if (spec->powerdown_adcs) @@ -5748,7 +5749,6 @@ again: /* fallthru */ case 0x111d76b4: /* 6 Port without Analog Mixer */ case 0x111d76b5: - spec->init = stac92hd71bxx_core_init; codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs; spec->num_dmics = stac92xx_connected_ports(codec, stac92hd71bxx_dmic_nids, @@ -5773,7 +5773,6 @@ again: spec->stream_delay = 40; /* 40 milliseconds */ /* disable VSW */ - spec->init = stac92hd71bxx_core_init; unmute_init++; snd_hda_codec_set_pincfg(codec, 0x0f, 0x40f000f0); snd_hda_codec_set_pincfg(codec, 0x19, 0x40f000f3); @@ -5788,7 +5787,6 @@ again: /* fallthru */ default: - spec->init = stac92hd71bxx_core_init; codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs; spec->num_dmics = stac92xx_connected_ports(codec, stac92hd71bxx_dmic_nids, @@ -5796,6 +5794,9 @@ again: break; } + if (get_wcaps_type(get_wcaps(codec, 0x28)) == AC_WID_VOL_KNB) + spec->init = stac92hd71bxx_core_init; + if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP) snd_hda_sequence_write_cache(codec, unmute_init); -- cgit v1.2.3-70-g09d2 From 227f052f4711caf432b9a7dbcfe1a2857d3c0def Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Tue, 31 Jul 2012 09:31:11 +0200 Subject: drbd: fix drbd wire compatibility for empty flushes DRBD has a concept of request epochs or reorder-domains, which are separated on the wire by P_BARRIER packets. Older DRBD is not able to handle zero-sized requests at all, so we need to map empty flushes to these drbd barriers. These are the equivalent of empty flushes, and by default trigger flushes on the receiving side anyways (unless not supported or explicitly disabled), so there is no need to handle this differently in newer drbd either. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_req.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index 910335c3092..0bb1e41f136 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -834,7 +834,15 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, uns req->private_bio = NULL; } if (rw == WRITE) { - remote = 1; + /* Need to replicate writes. Unless it is an empty flush, + * which is better mapped to a DRBD P_BARRIER packet, + * also for drbd wire protocol compatibility reasons. */ + if (unlikely(size == 0)) { + /* The only size==0 bios we expect are empty flushes. */ + D_ASSERT(bio->bi_rw & REQ_FLUSH); + remote = 0; + } else + remote = 1; } else { /* READ || READA */ if (local) { @@ -870,8 +878,11 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, uns * extent. This waits for any resync activity in the corresponding * resync extent to finish, and, if necessary, pulls in the target * extent into the activity log, which involves further disk io because - * of transactional on-disk meta data updates. */ - if (rw == WRITE && local && !test_bit(AL_SUSPENDED, &mdev->flags)) { + * of transactional on-disk meta data updates. + * Empty flushes don't need to go into the activity log, they can only + * flush data for pending writes which are already in there. */ + if (rw == WRITE && local && size + && !test_bit(AL_SUSPENDED, &mdev->flags)) { req->rq_state |= RQ_IN_ACT_LOG; drbd_al_begin_io(mdev, sector); } @@ -994,7 +1005,10 @@ allocate_barrier: if (rw == WRITE && _req_conflicts(req)) goto fail_conflicting; - list_add_tail(&req->tl_requests, &mdev->newest_tle->requests); + /* no point in adding empty flushes to the transfer log, + * they are mapped to drbd barriers already. */ + if (likely(size!=0)) + list_add_tail(&req->tl_requests, &mdev->newest_tle->requests); /* NOTE remote first: to get the concurrent write detection right, * we must register the request before start of local IO. */ @@ -1014,6 +1028,14 @@ allocate_barrier: mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) maybe_pull_ahead(mdev); + /* If this was a flush, queue a drbd barrier/start a new epoch. + * Unless the current epoch was empty anyways, or we are not currently + * replicating, in which case there is no point. */ + if (unlikely(bio->bi_rw & REQ_FLUSH) + && mdev->newest_tle->n_writes + && drbd_should_do_remote(mdev->state)) + queue_barrier(mdev); + spin_unlock_irq(&mdev->req_lock); kfree(b); /* if someone else has beaten us to it... */ -- cgit v1.2.3-70-g09d2 From 509fc019e534bdf5f3969d78c53184db4cf7ff48 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Tue, 31 Jul 2012 11:22:58 +0200 Subject: drbd: Finish requests that completed while IO was frozen Requests of an acked epoch are stored on the barrier_acked_requests list. In case the private bio of such a request completes while IO on the drbd device is suspended [req_mod(completed_ok)] then the request stays there. When thawing IO because the fence_peer handler returned, then we use tl_clear() to apply the connection_lost_while_pending event to all requests on the transfer-log and the barrier_acked_requests list. Up to now the connection_lost_while_pending event was not applied on requests on the barrier_acked_requests list. Fixed that. I.e. now the connection_lost_while_pending and resend events are applied to requests on the barrier_acked_requests list. For that it is necessary that the resend event finishes (local only) READS correctly. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_main.c | 28 ++++++++++++---------------- drivers/block/drbd/drbd_req.c | 6 ++++++ 2 files changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 2e0e7fc1dbb..136db95b212 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -79,6 +79,7 @@ static int w_md_sync(struct drbd_conf *mdev, struct drbd_work *w, int unused); static void md_sync_timer_fn(unsigned long data); static int w_bitmap_io(struct drbd_conf *mdev, struct drbd_work *w, int unused); static int w_go_diskless(struct drbd_conf *mdev, struct drbd_work *w, int unused); +static void _tl_clear(struct drbd_conf *mdev); MODULE_AUTHOR("Philipp Reisner , " "Lars Ellenberg "); @@ -432,19 +433,10 @@ static void _tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) /* Actions operating on the disk state, also want to work on requests that got barrier acked. */ - switch (what) { - case fail_frozen_disk_io: - case restart_frozen_disk_io: - list_for_each_safe(le, tle, &mdev->barrier_acked_requests) { - req = list_entry(le, struct drbd_request, tl_requests); - _req_mod(req, what); - } - case connection_lost_while_pending: - case resend: - break; - default: - dev_err(DEV, "what = %d in _tl_restart()\n", what); + list_for_each_safe(le, tle, &mdev->barrier_acked_requests) { + req = list_entry(le, struct drbd_request, tl_requests); + _req_mod(req, what); } } @@ -458,12 +450,17 @@ static void _tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) * receiver thread and the worker thread. */ void tl_clear(struct drbd_conf *mdev) +{ + spin_lock_irq(&mdev->req_lock); + _tl_clear(mdev); + spin_unlock_irq(&mdev->req_lock); +} + +static void _tl_clear(struct drbd_conf *mdev) { struct list_head *le, *tle; struct drbd_request *r; - spin_lock_irq(&mdev->req_lock); - _tl_restart(mdev, connection_lost_while_pending); /* we expect this list to be empty. */ @@ -482,7 +479,6 @@ void tl_clear(struct drbd_conf *mdev) memset(mdev->app_reads_hash, 0, APP_R_HSIZE*sizeof(void *)); - spin_unlock_irq(&mdev->req_lock); } void tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) @@ -1476,12 +1472,12 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, if (ns.susp_fen) { /* case1: The outdate peer handler is successful: */ if (os.pdsk > D_OUTDATED && ns.pdsk <= D_OUTDATED) { - tl_clear(mdev); if (test_bit(NEW_CUR_UUID, &mdev->flags)) { drbd_uuid_new_current(mdev); clear_bit(NEW_CUR_UUID, &mdev->flags); } spin_lock_irq(&mdev->req_lock); + _tl_clear(mdev); _drbd_set_state(_NS(mdev, susp_fen, 0), CS_VERBOSE, NULL); spin_unlock_irq(&mdev->req_lock); } diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index 0bb1e41f136..01b2ac641c7 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -695,6 +695,12 @@ int __req_mod(struct drbd_request *req, enum drbd_req_event what, break; case resend: + /* Simply complete (local only) READs. */ + if (!(req->rq_state & RQ_WRITE) && !req->w.cb) { + _req_may_be_done(req, m); + break; + } + /* If RQ_NET_OK is already set, we got a P_WRITE_ACK or P_RECV_ACK before the connection loss (B&C only); only P_BARRIER_ACK was missing. Trowing them out of the TL here by pretending we got a BARRIER_ACK -- cgit v1.2.3-70-g09d2 From d1aa4d04da8de5c89d73859e077d89c4c71d8ed1 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Wed, 8 Aug 2012 21:19:09 +0200 Subject: drbd: Write all pages of the bitmap after an online resize We need to write the whole bitmap after we moved the meta data due to an online resize operation. With the support for one peta byte devices bitmap IO was optimized to only write out touched pages. This optimization must be turned off when writing the bitmap after an online resize. This issue was introduced with drbd-8.3.10. The impact of this bug is that after an online resize, the next resync could become larger than expected. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_bitmap.c | 15 ++++++++++++++- drivers/block/drbd/drbd_int.h | 1 + drivers/block/drbd/drbd_nl.c | 4 ++-- 3 files changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index ba91b408aba..d8456649674 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -889,6 +889,7 @@ struct bm_aio_ctx { unsigned int done; unsigned flags; #define BM_AIO_COPY_PAGES 1 +#define BM_WRITE_ALL_PAGES 2 int error; struct kref kref; }; @@ -1059,7 +1060,8 @@ static int bm_rw(struct drbd_conf *mdev, int rw, unsigned flags, unsigned lazy_w if (lazy_writeout_upper_idx && i == lazy_writeout_upper_idx) break; if (rw & WRITE) { - if (bm_test_page_unchanged(b->bm_pages[i])) { + if (!(flags & BM_WRITE_ALL_PAGES) && + bm_test_page_unchanged(b->bm_pages[i])) { dynamic_dev_dbg(DEV, "skipped bm write for idx %u\n", i); continue; } @@ -1140,6 +1142,17 @@ int drbd_bm_write(struct drbd_conf *mdev) __must_hold(local) return bm_rw(mdev, WRITE, 0, 0); } +/** + * drbd_bm_write_all() - Write the whole bitmap to its on disk location. + * @mdev: DRBD device. + * + * Will write all pages. + */ +int drbd_bm_write_all(struct drbd_conf *mdev) __must_hold(local) +{ + return bm_rw(mdev, WRITE, BM_WRITE_ALL_PAGES, 0); +} + /** * drbd_bm_lazy_write_out() - Write bitmap pages 0 to @upper_idx-1, if they have changed. * @mdev: DRBD device. diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index b2ca143d005..b953cc7c9c0 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -1469,6 +1469,7 @@ extern int drbd_bm_e_weight(struct drbd_conf *mdev, unsigned long enr); extern int drbd_bm_write_page(struct drbd_conf *mdev, unsigned int idx) __must_hold(local); extern int drbd_bm_read(struct drbd_conf *mdev) __must_hold(local); extern int drbd_bm_write(struct drbd_conf *mdev) __must_hold(local); +extern int drbd_bm_write_all(struct drbd_conf *mdev) __must_hold(local); extern int drbd_bm_write_copy_pages(struct drbd_conf *mdev) __must_hold(local); extern unsigned long drbd_bm_ALe_set_all(struct drbd_conf *mdev, unsigned long al_enr); diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index fb9dce8daa2..edb490aad8b 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -674,8 +674,8 @@ enum determine_dev_size drbd_determine_dev_size(struct drbd_conf *mdev, enum dds la_size_changed && md_moved ? "size changed and md moved" : la_size_changed ? "size changed" : "md moved"); /* next line implicitly does drbd_suspend_io()+drbd_resume_io() */ - err = drbd_bitmap_io(mdev, &drbd_bm_write, - "size changed", BM_LOCKED_MASK); + err = drbd_bitmap_io(mdev, md_moved ? &drbd_bm_write_all : &drbd_bm_write, + "size changed", BM_LOCKED_MASK); if (err) { rv = dev_size_error; goto out; -- cgit v1.2.3-70-g09d2 From a0675a386a3a68f71e831bd064082e6717b45fdc Mon Sep 17 00:00:00 2001 From: Kleber Sacilotto de Souza Date: Fri, 10 Aug 2012 18:25:34 +0000 Subject: IB/mlx4: Check iboe netdev pointer before dereferencing it Unlike other parts of the mlx4_ib code, the function build_mlx_header() doesn't check if the iboe netdev of the given port is valid before dereferencing it, which can cause a crash if the ethernet interface has already been taken down. Fix this by checking for a valid netdev pointer before using it to get the port MAC address. Signed-off-by: Kleber Sacilotto de Souza Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index a6d8ea060ea..f585eddef4b 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1407,6 +1407,7 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_send_wr *wr, struct mlx4_wqe_mlx_seg *mlx = wqe; struct mlx4_wqe_inline_seg *inl = wqe + sizeof *mlx; struct mlx4_ib_ah *ah = to_mah(wr->wr.ud.ah); + struct net_device *ndev; union ib_gid sgid; u16 pkey; int send_size; @@ -1483,7 +1484,10 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_send_wr *wr, memcpy(sqp->ud_header.eth.dmac_h, ah->av.eth.mac, 6); /* FIXME: cache smac value? */ - smac = to_mdev(sqp->qp.ibqp.device)->iboe.netdevs[sqp->qp.port - 1]->dev_addr; + ndev = to_mdev(sqp->qp.ibqp.device)->iboe.netdevs[sqp->qp.port - 1]; + if (!ndev) + return -ENODEV; + smac = ndev->dev_addr; memcpy(sqp->ud_header.eth.smac_h, smac, 6); if (!memcmp(sqp->ud_header.eth.smac_h, sqp->ud_header.eth.dmac_h, 6)) mlx->flags |= cpu_to_be32(MLX4_WQE_CTRL_FORCE_LOOPBACK); -- cgit v1.2.3-70-g09d2 From 3e8309551777e2a54367daddb65b53e236754374 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 16 Aug 2012 16:25:33 +0300 Subject: mei: fix device stall after wd is stopped After watchdog was disabled the driver would stall due to wrong calculation of credits reduction The cat&paste bug was introduced in the commit 7bdf72d3d8059a50214069ea4b87c2174645f40f mei: introduce mei_data2slots wrapper Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/interrupt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index c6ffbbe5a6c..d78c05e693f 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -1253,7 +1253,7 @@ static int mei_irq_thread_write_handler(struct mei_io_list *cmpl_list, if (dev->wd_timeout) *slots -= mei_data2slots(MEI_START_WD_DATA_SIZE); else - *slots -= mei_data2slots(MEI_START_WD_DATA_SIZE); + *slots -= mei_data2slots(MEI_WD_PARAMS_SIZE); } } if (dev->stop) -- cgit v1.2.3-70-g09d2 From 731879f8e3d4c61220462160311fa650a8b96abf Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 23 Jul 2012 14:26:07 -0500 Subject: USB: qcserial: fix port handling on Gobi 1K and 2K+ MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams Tested-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 42 ++++++++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 18 deletions(-) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 314ae8ceba4..bfd50779f0c 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -199,43 +199,49 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) /* default to enabling interface */ altsetting = 0; - switch (ifnum) { - /* Composite mode; don't bind to the QMI/net interface as that - * gets handled by other drivers. - */ + /* Composite mode; don't bind to the QMI/net interface as that + * gets handled by other drivers. + */ + + if (is_gobi1k) { /* Gobi 1K USB layout: * 0: serial port (doesn't respond) * 1: serial port (doesn't respond) * 2: AT-capable modem port * 3: QMI/net - * - * Gobi 2K+ USB layout: + */ + if (ifnum == 2) + dev_dbg(dev, "Modem port found\n"); + else + altsetting = -1; + } else { + /* Gobi 2K+ USB layout: * 0: QMI/net * 1: DM/DIAG (use libqcdm from ModemManager for communication) * 2: AT-capable modem port * 3: NMEA */ - - case 1: - if (is_gobi1k) + switch (ifnum) { + case 0: + /* Don't claim the QMI/net interface */ altsetting = -1; - else + break; + case 1: dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n"); - break; - case 2: - dev_dbg(dev, "Modem port found\n"); - break; - case 3: - if (is_gobi1k) - altsetting = -1; - else + break; + case 2: + dev_dbg(dev, "Modem port found\n"); + break; + case 3: /* * NMEA (serial line 9600 8N1) * # echo "\$GPS_START" > /dev/ttyUSBx * # echo "\$GPS_STOP" > /dev/ttyUSBx */ dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n"); + break; + } } done: -- cgit v1.2.3-70-g09d2 From ca08649eb5dd30f11a5a8fe8659b48899b7ea6a1 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 16 Aug 2012 11:31:27 -0400 Subject: Revert "xen PVonHVM: move shared_info to MMIO before kexec" This reverts commit 00e37bdb0113a98408de42db85be002f21dbffd3. During shutdown of PVHVM guests with more than 2VCPUs on certain machines we can hit the race where the replaced shared_info is not replaced fast enough and the PV time clock retries reading the same area over and over without any any success and is stuck in an infinite loop. Acked-by: Olaf Hering Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/enlighten.c | 118 +++++---------------------------------------- arch/x86/xen/suspend.c | 2 +- arch/x86/xen/xen-ops.h | 2 +- drivers/xen/platform-pci.c | 15 ------ include/xen/events.h | 2 - 5 files changed, 13 insertions(+), 126 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index a6f8acbdfc9..f1814fc2cb7 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include @@ -1472,130 +1471,38 @@ asmlinkage void __init xen_start_kernel(void) #endif } -#ifdef CONFIG_XEN_PVHVM -/* - * The pfn containing the shared_info is located somewhere in RAM. This - * will cause trouble if the current kernel is doing a kexec boot into a - * new kernel. The new kernel (and its startup code) can not know where - * the pfn is, so it can not reserve the page. The hypervisor will - * continue to update the pfn, and as a result memory corruption occours - * in the new kernel. - * - * One way to work around this issue is to allocate a page in the - * xen-platform pci device's BAR memory range. But pci init is done very - * late and the shared_info page is already in use very early to read - * the pvclock. So moving the pfn from RAM to MMIO is racy because some - * code paths on other vcpus could access the pfn during the small - * window when the old pfn is moved to the new pfn. There is even a - * small window were the old pfn is not backed by a mfn, and during that - * time all reads return -1. - * - * Because it is not known upfront where the MMIO region is located it - * can not be used right from the start in xen_hvm_init_shared_info. - * - * To minimise trouble the move of the pfn is done shortly before kexec. - * This does not eliminate the race because all vcpus are still online - * when the syscore_ops will be called. But hopefully there is no work - * pending at this point in time. Also the syscore_op is run last which - * reduces the risk further. - */ - -static struct shared_info *xen_hvm_shared_info; - -static void xen_hvm_connect_shared_info(unsigned long pfn) +void __ref xen_hvm_init_shared_info(void) { + int cpu; struct xen_add_to_physmap xatp; + static struct shared_info *shared_info_page = 0; + if (!shared_info_page) + shared_info_page = (struct shared_info *) + extend_brk(PAGE_SIZE, PAGE_SIZE); xatp.domid = DOMID_SELF; xatp.idx = 0; xatp.space = XENMAPSPACE_shared_info; - xatp.gpfn = pfn; + xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT; if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp)) BUG(); -} -static void xen_hvm_set_shared_info(struct shared_info *sip) -{ - int cpu; - - HYPERVISOR_shared_info = sip; + HYPERVISOR_shared_info = (struct shared_info *)shared_info_page; /* xen_vcpu is a pointer to the vcpu_info struct in the shared_info * page, we use it in the event channel upcall and in some pvclock * related functions. We don't need the vcpu_info placement * optimizations because we don't use any pv_mmu or pv_irq op on * HVM. - * When xen_hvm_set_shared_info is run at boot time only vcpu 0 is - * online but xen_hvm_set_shared_info is run at resume time too and + * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is + * online but xen_hvm_init_shared_info is run at resume time too and * in that case multiple vcpus might be online. */ for_each_online_cpu(cpu) { per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; } } -/* Reconnect the shared_info pfn to a mfn */ -void xen_hvm_resume_shared_info(void) -{ - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); -} - -#ifdef CONFIG_KEXEC -static struct shared_info *xen_hvm_shared_info_kexec; -static unsigned long xen_hvm_shared_info_pfn_kexec; - -/* Remember a pfn in MMIO space for kexec reboot */ -void __devinit xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn) -{ - xen_hvm_shared_info_kexec = sip; - xen_hvm_shared_info_pfn_kexec = pfn; -} - -static void xen_hvm_syscore_shutdown(void) -{ - struct xen_memory_reservation reservation = { - .domid = DOMID_SELF, - .nr_extents = 1, - }; - unsigned long prev_pfn; - int rc; - - if (!xen_hvm_shared_info_kexec) - return; - - prev_pfn = __pa(xen_hvm_shared_info) >> PAGE_SHIFT; - set_xen_guest_handle(reservation.extent_start, &prev_pfn); - - /* Move pfn to MMIO, disconnects previous pfn from mfn */ - xen_hvm_connect_shared_info(xen_hvm_shared_info_pfn_kexec); - - /* Update pointers, following hypercall is also a memory barrier */ - xen_hvm_set_shared_info(xen_hvm_shared_info_kexec); - - /* Allocate new mfn for previous pfn */ - do { - rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation); - if (rc == 0) - msleep(123); - } while (rc == 0); - - /* Make sure the previous pfn is really connected to a (new) mfn */ - BUG_ON(rc != 1); -} - -static struct syscore_ops xen_hvm_syscore_ops = { - .shutdown = xen_hvm_syscore_shutdown, -}; -#endif - -/* Use a pfn in RAM, may move to MMIO before kexec. */ -static void __init xen_hvm_init_shared_info(void) -{ - /* Remember pointer for resume */ - xen_hvm_shared_info = extend_brk(PAGE_SIZE, PAGE_SIZE); - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); - xen_hvm_set_shared_info(xen_hvm_shared_info); -} - +#ifdef CONFIG_XEN_PVHVM static void __init init_hvm_pv_info(void) { int major, minor; @@ -1646,9 +1553,6 @@ static void __init xen_hvm_guest_init(void) init_hvm_pv_info(); xen_hvm_init_shared_info(); -#ifdef CONFIG_KEXEC - register_syscore_ops(&xen_hvm_syscore_ops); -#endif if (xen_feature(XENFEAT_hvm_callback_vector)) xen_have_vector_callback = 1; diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index ae8a00c39de..45329c8c226 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -30,7 +30,7 @@ void xen_arch_hvm_post_suspend(int suspend_cancelled) { #ifdef CONFIG_XEN_PVHVM int cpu; - xen_hvm_resume_shared_info(); + xen_hvm_init_shared_info(); xen_callback_vector(); xen_unplug_emulated_devices(); if (xen_feature(XENFEAT_hvm_safe_pvclock)) { diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 1e4329e04e0..202d4c15015 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -41,7 +41,7 @@ void xen_enable_syscall(void); void xen_vcpu_restore(void); void xen_callback_vector(void); -void xen_hvm_resume_shared_info(void); +void xen_hvm_init_shared_info(void); void xen_unplug_emulated_devices(void); void __init xen_build_dynamic_phys_to_machine(void); diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c index d4c50d63acb..97ca359ae2b 100644 --- a/drivers/xen/platform-pci.c +++ b/drivers/xen/platform-pci.c @@ -101,19 +101,6 @@ static int platform_pci_resume(struct pci_dev *pdev) return 0; } -static void __devinit prepare_shared_info(void) -{ -#ifdef CONFIG_KEXEC - unsigned long addr; - struct shared_info *hvm_shared_info; - - addr = alloc_xen_mmio(PAGE_SIZE); - hvm_shared_info = ioremap(addr, PAGE_SIZE); - memset(hvm_shared_info, 0, PAGE_SIZE); - xen_hvm_prepare_kexec(hvm_shared_info, addr >> PAGE_SHIFT); -#endif -} - static int __devinit platform_pci_init(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -151,8 +138,6 @@ static int __devinit platform_pci_init(struct pci_dev *pdev, platform_mmio = mmio_addr; platform_mmiolen = mmio_len; - prepare_shared_info(); - if (!xen_have_vector_callback) { ret = xen_allocate_irq(pdev); if (ret) { diff --git a/include/xen/events.h b/include/xen/events.h index 9c641deb65d..04399b28e82 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -58,8 +58,6 @@ void notify_remote_via_irq(int irq); void xen_irq_resume(void); -void xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn); - /* Clear an irq's pending state, in preparation for polling on it */ void xen_clear_irq_pending(int irq); void xen_set_irq_pending(int irq); -- cgit v1.2.3-70-g09d2 From af7f2158fdee9d7f55b793b09f8170a3391f889a Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Thu, 19 Jul 2012 13:46:21 -0600 Subject: drivers-core: make structured logging play nice with dynamic-debug commit c4e00daaa96d3a0786f1f4fe6456281c60ef9a16 changed __dev_printk in a way that broke dynamic-debug's ability to control the dynamic prefix of dev_dbg(dev,..), but not dev_dbg(NULL,..) or pr_debug(..), which is why it wasnt noticed sooner. When dev==NULL, __dev_printk() just calls printk(), which just works. But otherwise, it assumed that level was always a string like "" and just plucked out the 'L', ignoring the rest. However, dynamic_emit_prefix() adds "[tid] module:func:line:" to the string, those additions all got lost. Signed-off-by: Jim Cromie Acked-by: Jason Baron Cc: stable Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index f338037a4f3..cdd01c52c62 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1865,6 +1865,7 @@ int __dev_printk(const char *level, const struct device *dev, struct va_format *vaf) { char dict[128]; + const char *level_extra = ""; size_t dictlen = 0; const char *subsys; @@ -1911,10 +1912,14 @@ int __dev_printk(const char *level, const struct device *dev, "DEVICE=+%s:%s", subsys, dev_name(dev)); } skip: + if (level[3]) + level_extra = &level[3]; /* skip past "" */ + return printk_emit(0, level[1] - '0', dictlen ? dict : NULL, dictlen, - "%s %s: %pV", - dev_driver_string(dev), dev_name(dev), vaf); + "%s %s: %s%pV", + dev_driver_string(dev), dev_name(dev), + level_extra, vaf); } EXPORT_SYMBOL(__dev_printk); -- cgit v1.2.3-70-g09d2 From 7b7e995d69199b555181ac057c47b017c510a129 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 24 Jul 2012 09:26:57 +0800 Subject: extcon: extcon_gpio: Replace gpio_request_one by devm_gpio_request_one commit 01eaf24 "extcon: Convert extcon_gpio to devm_gpio_request_one" missed the replacement for devm_gpio_request_one. fix it. Signed-off-by: Axel Lin Signed-off-by: Chanwoo Choi Signed-off-by: Greg Kroah-Hartman --- drivers/extcon/extcon_gpio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/extcon/extcon_gpio.c b/drivers/extcon/extcon_gpio.c index fe3db45fa83..3cc152e690b 100644 --- a/drivers/extcon/extcon_gpio.c +++ b/drivers/extcon/extcon_gpio.c @@ -107,7 +107,8 @@ static int __devinit gpio_extcon_probe(struct platform_device *pdev) if (ret < 0) return ret; - ret = gpio_request_one(extcon_data->gpio, GPIOF_DIR_IN, pdev->name); + ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN, + pdev->name); if (ret < 0) goto err; -- cgit v1.2.3-70-g09d2 From 62b2ce964bb901f00a480104bd35a2e1f8d2cf58 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Wed, 15 Aug 2012 13:30:12 -0700 Subject: vfs: fix propagation of atomic_open create error on negative dentry If ->atomic_open() returns -ENOENT, we take care to return the create error (e.g., EACCES), if any. Do the same when ->atomic_open() returns 1 and provides a negative dentry. This fixes a regression where an unprivileged open O_CREAT fails with ENOENT instead of EACCES, introduced with the new atomic_open code. It is tested by the open/08.t test in the pjd posix test suite, and was observed on top of fuse (backed by ceph-fuse). Signed-off-by: Sage Weil Signed-off-by: Miklos Szeredi --- fs/namei.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/namei.c b/fs/namei.c index 26c28ec4f4a..db76b866a09 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2489,6 +2489,10 @@ static int atomic_open(struct nameidata *nd, struct dentry *dentry, dput(dentry); dentry = file->f_path.dentry; } + if (create_error && dentry->d_inode == NULL) { + error = create_error; + goto out; + } goto looked_up; } -- cgit v1.2.3-70-g09d2 From a2f6985332d2564e443d9d889ce70f39b3293d09 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 6 Aug 2012 15:23:55 +0300 Subject: mei: add mei_quirk_probe function The main purpose of this function is to exclude ME devices without support for MEI/HECI interface from binding Currently affected systems are C600/X79 based servers that expose PCI device even though it doesn't supported ME Interface. MEI driver accessing such nonfunctional device can corrupt the system. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/main.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 09233020886..7422c765284 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -924,6 +924,27 @@ static struct miscdevice mei_misc_device = { .minor = MISC_DYNAMIC_MINOR, }; +/** + * mei_quirk_probe - probe for devices that doesn't valid ME interface + * @pdev: PCI device structure + * @ent: entry into pci_device_table + * + * returns true if ME Interface is valid, false otherwise + */ +static bool __devinit mei_quirk_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + u32 reg; + if (ent->device == MEI_DEV_ID_PBG_1) { + pci_read_config_dword(pdev, 0x48, ®); + /* make sure that bit 9 is up and bit 10 is down */ + if ((reg & 0x600) == 0x200) { + dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n"); + return false; + } + } + return true; +} /** * mei_probe - Device Initialization Routine * @@ -939,6 +960,12 @@ static int __devinit mei_probe(struct pci_dev *pdev, int err; mutex_lock(&mei_mutex); + + if (!mei_quirk_probe(pdev, ent)) { + err = -ENODEV; + goto end; + } + if (mei_device) { err = -EEXIST; goto end; -- cgit v1.2.3-70-g09d2 From a1d95cfc07d637e024027101a691dad5b0eef27a Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 16 Aug 2012 11:19:11 -0600 Subject: staging: comedi: usbduxsigma: Declare MODULE_FIRMWARE usage Cc: Ian Abbott Cc: Mori Hess Cc: Bernd Porr Cc: Dan Carpenter Cc: H Hartley Sweeten Signed-off-by: Tim Gardner Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbduxsigma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c index 543e604791e..f54ab8c2fcf 100644 --- a/drivers/staging/comedi/drivers/usbduxsigma.c +++ b/drivers/staging/comedi/drivers/usbduxsigma.c @@ -63,6 +63,7 @@ Status: testing #define BULK_TIMEOUT 1000 /* constants for "firmware" upload and download */ +#define FIRMWARE "usbduxsigma_firmware.bin" #define USBDUXSUB_FIRMWARE 0xA0 #define VENDOR_DIR_IN 0xC0 #define VENDOR_DIR_OUT 0x40 @@ -2780,7 +2781,7 @@ static int usbduxsigma_usb_probe(struct usb_interface *uinterf, ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, - "usbduxsigma_firmware.bin", + FIRMWARE, &udev->dev, GFP_KERNEL, usbduxsub + index, @@ -2845,3 +2846,4 @@ module_comedi_usb_driver(usbduxsigma_driver, usbduxsigma_usb_driver); MODULE_AUTHOR("Bernd Porr, BerndPorr@f2s.com"); MODULE_DESCRIPTION("Stirling/ITL USB-DUX SIGMA -- Bernd.Porr@f2s.com"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE); -- cgit v1.2.3-70-g09d2 From 1e1ccc3ad6ebe720e14dd9787f6b5cebaf46f573 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 16 Aug 2012 11:15:37 -0600 Subject: staging: comedi: usbdux: Declare MODULE_FIRMWARE usage Cc: Ian Abbott Cc: Mori Hess Cc: H Hartley Sweeten Signed-off-by: Tim Gardner Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbdux.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 848c7ec0697..11ee83681da 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -102,6 +102,7 @@ sampling rate. If you sample two channels you get 4kHz and so on. #define BULK_TIMEOUT 1000 /* constants for "firmware" upload and download */ +#define FIRMWARE "usbdux_firmware.bin" #define USBDUXSUB_FIRMWARE 0xA0 #define VENDOR_DIR_IN 0xC0 #define VENDOR_DIR_OUT 0x40 @@ -2791,7 +2792,7 @@ static int usbdux_usb_probe(struct usb_interface *uinterf, ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, - "usbdux_firmware.bin", + FIRMWARE, &udev->dev, GFP_KERNEL, usbduxsub + index, @@ -2850,3 +2851,4 @@ module_comedi_usb_driver(usbdux_driver, usbdux_usb_driver); MODULE_AUTHOR("Bernd Porr, BerndPorr@f2s.com"); MODULE_DESCRIPTION("Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE); -- cgit v1.2.3-70-g09d2 From e74f7fc5d85c5c0bedb69913e2a10774ddb6f367 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 16 Aug 2012 11:09:28 -0600 Subject: staging: comedi: usbduxfast: Declare MODULE_FIRMWARE usage Cc: Ian Abbott Cc: Mori Hess Cc: H Hartley Sweeten Cc: Ravishankar Karkala Mallikarjunayya Signed-off-by: Tim Gardner Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbduxfast.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c index d9911588c10..8eb41257c6c 100644 --- a/drivers/staging/comedi/drivers/usbduxfast.c +++ b/drivers/staging/comedi/drivers/usbduxfast.c @@ -57,6 +57,7 @@ /* * constants for "firmware" upload and download */ +#define FIRMWARE "usbduxfast_firmware.bin" #define USBDUXFASTSUB_FIRMWARE 0xA0 #define VENDOR_DIR_IN 0xC0 #define VENDOR_DIR_OUT 0x40 @@ -1706,7 +1707,7 @@ static int usbduxfast_usb_probe(struct usb_interface *uinterf, ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, - "usbduxfast_firmware.bin", + FIRMWARE, &udev->dev, GFP_KERNEL, usbduxfastsub + index, @@ -1774,3 +1775,4 @@ module_comedi_usb_driver(usbduxfast_driver, usbduxfast_usb_driver); MODULE_AUTHOR("Bernd Porr, BerndPorr@f2s.com"); MODULE_DESCRIPTION("USB-DUXfast, BerndPorr@f2s.com"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE); -- cgit v1.2.3-70-g09d2 From 00592021010ad86d3b26bac7034034f6af145a2c Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 8 Aug 2012 10:37:59 +0800 Subject: serial: mxs-auart: fix the wrong RTS hardware flow control Without checking if the auart supports the hardware flow control or not, the old mxs_auart_set_mctrl() asserted the RTS pin blindly. This will causes the auart receives wrong data in the following case: The far-end has already started the write operation, and wait for the auart asserts the RTS pin. Then the auart starts the read operation, but mxs_auart_set_mctrl() may be called before we set the RTSCTS in the mxs_auart_settermios(). So the RTS pin is asserted in a wrong situation, and we get the wrong data in the end. This bug has been catched when I connect the mx23(DTE) to the mx53(DCE). This patch also replaces the AUART_CTRL2_RTS with AUART_CTRL2_RTSEN. We should use the real the hardware flow control, not the software-controled hardware flow control. Signed-off-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mxs-auart.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 2e341b81ff8..3a667eed63d 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -73,6 +73,7 @@ #define AUART_CTRL0_CLKGATE (1 << 30) #define AUART_CTRL2_CTSEN (1 << 15) +#define AUART_CTRL2_RTSEN (1 << 14) #define AUART_CTRL2_RTS (1 << 11) #define AUART_CTRL2_RXE (1 << 9) #define AUART_CTRL2_TXE (1 << 8) @@ -259,9 +260,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) u32 ctrl = readl(u->membase + AUART_CTRL2); - ctrl &= ~AUART_CTRL2_RTS; - if (mctrl & TIOCM_RTS) - ctrl |= AUART_CTRL2_RTS; + ctrl &= ~AUART_CTRL2_RTSEN; + if (mctrl & TIOCM_RTS) { + if (u->state->port.flags & ASYNC_CTS_FLOW) + ctrl |= AUART_CTRL2_RTSEN; + } + s->ctrl = mctrl; writel(ctrl, u->membase + AUART_CTRL2); } @@ -359,9 +363,9 @@ static void mxs_auart_settermios(struct uart_port *u, /* figure out the hardware flow control settings */ if (cflag & CRTSCTS) - ctrl2 |= AUART_CTRL2_CTSEN; + ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN; else - ctrl2 &= ~AUART_CTRL2_CTSEN; + ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN); /* set baud rate */ baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk); -- cgit v1.2.3-70-g09d2 From 38f8eefccf3a23c4058a570fa2938a4f553cf8e0 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Sun, 12 Aug 2012 07:16:43 -0500 Subject: pmac_zilog,kdb: Fix console poll hook to return instead of loop kdb <-> kgdb transitioning does not work properly with this UART driver because the get character routine loops indefinitely as opposed to returning NO_POLL_CHAR per the expectation of the KDB I/O driver API. The symptom is a kernel hang when trying to switch debug modes. Cc: Alan Cox Signed-off-by: Jason Wessel Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pmac_zilog.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 654755a990d..333c8d012b0 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1348,10 +1348,16 @@ static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser) static int pmz_poll_get_char(struct uart_port *port) { struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + int tries = 2; - while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) - udelay(5); - return read_zsdata(uap); + while (tries) { + if ((read_zsreg(uap, R0) & Rx_CH_AV) != 0) + return read_zsdata(uap); + if (tries--) + udelay(5); + } + + return NO_POLL_CHAR; } static void pmz_poll_put_char(struct uart_port *port, unsigned char c) -- cgit v1.2.3-70-g09d2 From dfffd0d65fdf16d034681716dcbea74776f62e40 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 16 Jul 2012 09:42:00 +0100 Subject: iio: staging: ad7298_ring: Fix maybe-uninitialized warning drivers/staging/iio/adc/ad7298_ring.c:97:37: warning: 'time_ns' may be used uninitialized in this function [-Wmaybe-uninitialized] Reported-by: Fengguang Wu Signed-off-by: Michael Hennerich Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7298_ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7298_ring.c b/drivers/staging/iio/adc/ad7298_ring.c index fd1d855ff57..506016f0159 100644 --- a/drivers/staging/iio/adc/ad7298_ring.c +++ b/drivers/staging/iio/adc/ad7298_ring.c @@ -76,7 +76,7 @@ static irqreturn_t ad7298_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct ad7298_state *st = iio_priv(indio_dev); struct iio_buffer *ring = indio_dev->buffer; - s64 time_ns; + s64 time_ns = 0; __u16 buf[16]; int b_sent, i; -- cgit v1.2.3-70-g09d2 From 8857df3aceb7a8eb7558059b7da109e41dd1fb95 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 20 Jul 2012 09:31:00 +0100 Subject: iio: frequency: ADF4350: Fix potential reference div factor overflow. With small channel spacing values and high reference frequencies it is possible to exceed the range of the 10-bit counter. Workaround by checking the range and widening some constrains. We don't use the REG1_PHASE value in this case the datasheet recommends to set it to 1 if not used. Signed-off-by: Michael Hennerich Signed-off-by: Jonathan Cameron --- drivers/iio/frequency/adf4350.c | 24 +++++++++++++++--------- include/linux/iio/frequency/adf4350.h | 2 ++ 2 files changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c index 59fbb3ae40e..e35bb8f6fe7 100644 --- a/drivers/iio/frequency/adf4350.c +++ b/drivers/iio/frequency/adf4350.c @@ -129,7 +129,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) { struct adf4350_platform_data *pdata = st->pdata; u64 tmp; - u32 div_gcd, prescaler; + u32 div_gcd, prescaler, chspc; u16 mdiv, r_cnt = 0; u8 band_sel_div; @@ -158,14 +158,20 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) if (pdata->ref_div_factor) r_cnt = pdata->ref_div_factor - 1; - do { - r_cnt = adf4350_tune_r_cnt(st, r_cnt); + chspc = st->chspc; - st->r1_mod = st->fpfd / st->chspc; - while (st->r1_mod > ADF4350_MAX_MODULUS) { - r_cnt = adf4350_tune_r_cnt(st, r_cnt); - st->r1_mod = st->fpfd / st->chspc; - } + do { + do { + do { + r_cnt = adf4350_tune_r_cnt(st, r_cnt); + st->r1_mod = st->fpfd / chspc; + if (r_cnt > ADF4350_MAX_R_CNT) { + /* try higher spacing values */ + chspc++; + r_cnt = 0; + } + } while ((st->r1_mod > ADF4350_MAX_MODULUS) && r_cnt); + } while (r_cnt == 0); tmp = freq * (u64)st->r1_mod + (st->fpfd > 1); do_div(tmp, st->fpfd); /* Div round closest (n + d/2)/d */ @@ -194,7 +200,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) st->regs[ADF4350_REG0] = ADF4350_REG0_INT(st->r0_int) | ADF4350_REG0_FRACT(st->r0_fract); - st->regs[ADF4350_REG1] = ADF4350_REG1_PHASE(0) | + st->regs[ADF4350_REG1] = ADF4350_REG1_PHASE(1) | ADF4350_REG1_MOD(st->r1_mod) | prescaler; diff --git a/include/linux/iio/frequency/adf4350.h b/include/linux/iio/frequency/adf4350.h index b76b4a87065..be91f344d5f 100644 --- a/include/linux/iio/frequency/adf4350.h +++ b/include/linux/iio/frequency/adf4350.h @@ -87,6 +87,8 @@ #define ADF4350_MAX_BANDSEL_CLK 125000 /* Hz */ #define ADF4350_MAX_FREQ_REFIN 250000000 /* Hz */ #define ADF4350_MAX_MODULUS 4095 +#define ADF4350_MAX_R_CNT 1023 + /** * struct adf4350_platform_data - platform specific information -- cgit v1.2.3-70-g09d2 From 1c795ebd00042b3a5c97e049fd1c08763714a7a8 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Wed, 8 Aug 2012 10:58:00 +0100 Subject: iio/adjd_s311: Fix potential memory leak in adjd_s311_update_scan_mode() Do not leak memory by updating pointer with potentially NULL realloc return value. There is no need to preserve data in the buffer, so replace krealloc() by kfree()-kmalloc() pair. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/iio/light/adjd_s311.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/iio/light/adjd_s311.c b/drivers/iio/light/adjd_s311.c index 1cbb449b319..9a99f43094f 100644 --- a/drivers/iio/light/adjd_s311.c +++ b/drivers/iio/light/adjd_s311.c @@ -271,9 +271,10 @@ static int adjd_s311_update_scan_mode(struct iio_dev *indio_dev, const unsigned long *scan_mask) { struct adjd_s311_data *data = iio_priv(indio_dev); - data->buffer = krealloc(data->buffer, indio_dev->scan_bytes, - GFP_KERNEL); - if (!data->buffer) + + kfree(data->buffer); + data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); + if (data->buffer == NULL) return -ENOMEM; return 0; -- cgit v1.2.3-70-g09d2 From 421afe5805cbeda35097dc2ea36b9f6f077b4858 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7793: Add missing break in switch statement Without the break statement we fall right through to the default case and return an error value. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 76fdd7145fc..1d0cd09be86 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -676,7 +676,7 @@ static int ad7793_write_raw(struct iio_dev *indio_dev, } ret = 0; } - + break; default: ret = -EINVAL; } -- cgit v1.2.3-70-g09d2 From e83539092c390c95e30b0d9e434709f195340f80 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7793: Mark channels as unsigned The values reported by the AD7793 are unsigned. In uniploar mode: 0x000000 is zeroscale 0xffffff is fullscale In bipolar mode: 0x000000 is negative fullscale 0x800000 is zeroscale 0xffffff is positive fullscale In bipolar mode there is a binary offset, but the values are still unsigned. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 1d0cd09be86..5e457a4b423 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -722,7 +722,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 0, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[1] = { .type = IIO_VOLTAGE, @@ -734,7 +734,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 1, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[2] = { .type = IIO_VOLTAGE, @@ -746,7 +746,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 2, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[3] = { .type = IIO_VOLTAGE, @@ -759,7 +759,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 3, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[4] = { .type = IIO_TEMP, @@ -769,7 +769,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 4, - .scan_type = IIO_ST('s', 24, 32, 0), + .scan_type = IIO_ST('u', 24, 32, 0), }, .channel[5] = { .type = IIO_VOLTAGE, @@ -780,7 +780,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 5, - .scan_type = IIO_ST('s', 24, 32, 0), + .scan_type = IIO_ST('u', 24, 32, 0), }, .channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6), }, @@ -795,7 +795,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 0, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[1] = { .type = IIO_VOLTAGE, @@ -807,7 +807,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 1, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[2] = { .type = IIO_VOLTAGE, @@ -819,7 +819,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 2, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[3] = { .type = IIO_VOLTAGE, @@ -832,7 +832,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 3, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[4] = { .type = IIO_TEMP, @@ -842,7 +842,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 4, - .scan_type = IIO_ST('s', 16, 32, 0), + .scan_type = IIO_ST('u', 16, 32, 0), }, .channel[5] = { .type = IIO_VOLTAGE, @@ -853,7 +853,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 5, - .scan_type = IIO_ST('s', 16, 32, 0), + .scan_type = IIO_ST('u', 16, 32, 0), }, .channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6), }, -- cgit v1.2.3-70-g09d2 From 680f8ea0e85c5c3a7283be99435d6461e8725348 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7793: Report channel offset In bipolar mode there is a a binary offset of 2**(N-1) (with N being the number of bits) on the reported value. Currently this value is subtracted when doing a manual read. While this works for manual channel readings it does not work for buffered mode. So report the offset in the channels offset property, which will work in both modes. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 39 ++++++++++++++++++++++++++------------- 1 file changed, 26 insertions(+), 13 deletions(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 5e457a4b423..56014a8b687 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -604,9 +604,6 @@ static int ad7793_read_raw(struct iio_dev *indio_dev, *val = (smpl >> chan->scan_type.shift) & ((1 << (chan->scan_type.realbits)) - 1); - if (!unipolar) - *val -= (1 << (chan->scan_type.realbits - 1)); - return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: @@ -639,6 +636,12 @@ static int ad7793_read_raw(struct iio_dev *indio_dev, *val = scale_uv; return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_OFFSET: + if (!unipolar) + *val -= (1 << (chan->scan_type.realbits - 1)); + else + *val = 0; + return IIO_VAL_INT; } return -EINVAL; } @@ -720,7 +723,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 0, .address = AD7793_CH_AIN1P_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 24, 32, 0) }, @@ -732,7 +736,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 1, .address = AD7793_CH_AIN2P_AIN2M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 1, .scan_type = IIO_ST('u', 24, 32, 0) }, @@ -744,7 +749,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN3P_AIN3M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 2, .scan_type = IIO_ST('u', 24, 32, 0) }, @@ -757,7 +763,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN1M_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 3, .scan_type = IIO_ST('u', 24, 32, 0) }, @@ -778,7 +785,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 4, .address = AD7793_CH_AVDD_MONITOR, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 5, .scan_type = IIO_ST('u', 24, 32, 0), }, @@ -793,7 +801,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 0, .address = AD7793_CH_AIN1P_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 16, 32, 0) }, @@ -805,7 +814,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 1, .address = AD7793_CH_AIN2P_AIN2M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 1, .scan_type = IIO_ST('u', 16, 32, 0) }, @@ -817,7 +827,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN3P_AIN3M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 2, .scan_type = IIO_ST('u', 16, 32, 0) }, @@ -830,7 +841,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN1M_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 3, .scan_type = IIO_ST('u', 16, 32, 0) }, @@ -851,7 +863,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 4, .address = AD7793_CH_AVDD_MONITOR, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 5, .scan_type = IIO_ST('u', 16, 32, 0), }, -- cgit v1.2.3-70-g09d2 From 2a9e0662f6779d2074ecaa80ea5753d5f0cf1b93 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7793: Fix temperature scale and offset The temperature channel uses the internal 1.17V reference with 0.81 mv/C. The reported temperature is in Kevlin, so we need to add the Kelvin to Celcius offset when reporting the offset for the temperature channel. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 56014a8b687..3c8d1d4c619 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -617,30 +617,37 @@ static int ad7793_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT_PLUS_NANO; } else { /* 1170mV / 2^23 * 6 */ - scale_uv = (1170ULL * 100000000ULL * 6ULL) - >> (chan->scan_type.realbits - - (unipolar ? 0 : 1)); + scale_uv = (1170ULL * 100000000ULL * 6ULL); } break; case IIO_TEMP: - /* Always uses unity gain and internal ref */ - scale_uv = (2500ULL * 100000000ULL) - >> (chan->scan_type.realbits - - (unipolar ? 0 : 1)); + /* 1170mV / 0.81 mV/C / 2^23 */ + scale_uv = 1444444444444ULL; break; default: return -EINVAL; } - *val2 = do_div(scale_uv, 100000000) * 10; - *val = scale_uv; - + scale_uv >>= (chan->scan_type.realbits - (unipolar ? 0 : 1)); + *val = 0; + *val2 = scale_uv; return IIO_VAL_INT_PLUS_NANO; case IIO_CHAN_INFO_OFFSET: if (!unipolar) - *val -= (1 << (chan->scan_type.realbits - 1)); + *val = -(1 << (chan->scan_type.realbits - 1)); else *val = 0; + + /* Kelvin to Celsius */ + if (chan->type == IIO_TEMP) { + unsigned long long offset; + unsigned int shift; + + shift = chan->scan_type.realbits - (unipolar ? 0 : 1); + offset = 273ULL << shift; + do_div(offset, 1444); + *val -= offset; + } return IIO_VAL_INT; } return -EINVAL; -- cgit v1.2.3-70-g09d2 From 08ca3b78505b4fba1e782ae9266bfaf878e4bdd1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7793: Follow new IIO naming spec Make the "in-in_scale_available" attribute follow the new naming spec and rename it to "in_voltage-voltage_scale_available". Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 3c8d1d4c619..91cb95c6763 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -563,8 +563,9 @@ static ssize_t ad7793_show_scale_available(struct device *dev, return len; } -static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, in-in_scale_available, - S_IRUGO, ad7793_show_scale_available, NULL, 0); +static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, + in_voltage-voltage_scale_available, S_IRUGO, + ad7793_show_scale_available, NULL, 0); static struct attribute *ad7793_attributes[] = { &iio_dev_attr_sampling_frequency.dev_attr.attr, -- cgit v1.2.3-70-g09d2 From 87a0c1574d2fd478c24e841c96f5019e5b44762f Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7793: Fix internal reference value The internal reference for the ad7793 and similar is 1.17V Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 91cb95c6763..112e2b7b5bc 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -922,7 +922,7 @@ static int __devinit ad7793_probe(struct spi_device *spi) else if (voltage_uv) st->int_vref_mv = voltage_uv / 1000; else - st->int_vref_mv = 2500; /* Build-in ref */ + st->int_vref_mv = 1170; /* Build-in ref */ spi_set_drvdata(spi, indio_dev); st->spi = spi; -- cgit v1.2.3-70-g09d2 From f09906f43b8a0d52e3321db7d6f9d031097b0bc9 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7192: Add missing break in switch statement Without the break statement we fall right through to the default case and return an error value. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7192.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 22c3923d55e..b9a74425ff7 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -890,7 +890,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev, } ret = 0; } - + break; default: ret = -EINVAL; } -- cgit v1.2.3-70-g09d2 From 74aa933894e1c32376a8372ec8264b8c6f7faf24 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7192: Fix setting ACX Write to the correct register when setting the ACX bit. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7192.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index b9a74425ff7..0a1bc6a31d0 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -754,7 +754,7 @@ static ssize_t ad7192_set(struct device *dev, else st->mode &= ~AD7192_MODE_ACX; - ad7192_write_reg(st, AD7192_REG_GPOCON, 3, st->mode); + ad7192_write_reg(st, AD7192_REG_MODE, 3, st->mode); break; default: ret = -EINVAL; -- cgit v1.2.3-70-g09d2 From a684a0c711d384665b43f9079a035e52a2761eab Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7192: Mark channels as unsigned The values reported by the AD7793 are unsigned. In uniploar mode: 0x000000 is zeroscale 0xffffff is fullscale In bipolar mode: 0x000000 is negative fullscale 0x800000 is zeroscale 0xffffff is positive fullscale In bipolar mode there is a binary offset, but the values are still unsigned. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7192.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 0a1bc6a31d0..7ba69948632 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -945,7 +945,7 @@ static const struct iio_info ad7195_info = { IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ - .scan_type = IIO_ST('s', 24, 32, 0)} + .scan_type = IIO_ST('u', 24, 32, 0)} #define AD7192_CHAN(_chan, _address, _si) \ { .type = IIO_VOLTAGE, \ @@ -955,7 +955,7 @@ static const struct iio_info ad7195_info = { IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ - .scan_type = IIO_ST('s', 24, 32, 0)} + .scan_type = IIO_ST('u', 24, 32, 0)} #define AD7192_CHAN_TEMP(_chan, _address, _si) \ { .type = IIO_TEMP, \ @@ -965,7 +965,7 @@ static const struct iio_info ad7195_info = { IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ .address = _address, \ .scan_index = _si, \ - .scan_type = IIO_ST('s', 24, 32, 0)} + .scan_type = IIO_ST('u', 24, 32, 0)} static struct iio_chan_spec ad7192_channels[] = { AD7192_CHAN_DIFF(1, 2, NULL, AD7192_CH_AIN1P_AIN2M, 0), -- cgit v1.2.3-70-g09d2 From 58cdff6ee71b4ea00a6b822a52ebf9ceb0b6a7d5 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7192: Report channel offset In bipolar mode there is a a binary offset of 2**(N-1) (with N being the number of bits) on the reported value. Currently this value is subtracted when doing a manual read. While this works for manual channel readings it does not work for buffered mode. So report the offset in the channels offset property, which will work in both modes. Signed-off-by: Lars-Peter Clausen --- drivers/staging/iio/adc/ad7192.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 7ba69948632..73483d26a03 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -826,8 +826,6 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, switch (chan->type) { case IIO_VOLTAGE: - if (!unipolar) - *val -= (1 << (chan->scan_type.realbits - 1)); break; case IIO_TEMP: *val -= 0x800000; @@ -853,6 +851,12 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, default: return -EINVAL; } + case IIO_CHAN_INFO_OFFSET: + if (!unipolar) + *val -= (1 << (chan->scan_type.realbits - 1)); + else + *val = 0; + return IIO_VAL_INT; } return -EINVAL; @@ -942,7 +946,8 @@ static const struct iio_info ad7195_info = { .channel = _chan, \ .channel2 = _chan2, \ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ - IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_OFFSET_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ .scan_type = IIO_ST('u', 24, 32, 0)} @@ -952,7 +957,8 @@ static const struct iio_info ad7195_info = { .indexed = 1, \ .channel = _chan, \ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ - IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_OFFSET_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ .scan_type = IIO_ST('u', 24, 32, 0)} -- cgit v1.2.3-70-g09d2 From 4fcbcf95b775acc430742a09fb3334dce08b6c10 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7192: Report offset and scale for temperature channel The temperature channel reports values in degree Kelvin with sensitivity of 5630 codes per degree. If the chip is configured in bipolar mode there is an additional binary offset of 0x800000 and the sensitivity is divided by two. Currently the driver does the mapping from the raw value to degree Celsius when doing a manual conversion. This has several disadvantages, the major one being that it does not work for buffered mode, also by doing the division by the sensitivity in the driver the precession of the reported value is needlessly reduced. Furthermore the current calculation only works in bipolar mode and the current scale is of by a factor of 1000. This patch modifies the driver to report correct offset and scale values in both unipolar and bipolar mode and to report the raw temperature value for manual conversions. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7192.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 73483d26a03..095837285f4 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -798,6 +798,11 @@ static const struct attribute_group ad7195_attribute_group = { .attrs = ad7195_attributes, }; +static unsigned int ad7192_get_temp_scale(bool unipolar) +{ + return unipolar ? 2815 * 2 : 2815; +} + static int ad7192_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, @@ -824,17 +829,6 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, *val = (smpl >> chan->scan_type.shift) & ((1 << (chan->scan_type.realbits)) - 1); - switch (chan->type) { - case IIO_VOLTAGE: - break; - case IIO_TEMP: - *val -= 0x800000; - *val /= 2815; /* temp Kelvin */ - *val -= 273; /* temp Celsius */ - break; - default: - return -EINVAL; - } return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: @@ -846,16 +840,20 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, mutex_unlock(&indio_dev->mlock); return IIO_VAL_INT_PLUS_NANO; case IIO_TEMP: - *val = 1000; - return IIO_VAL_INT; + *val = 0; + *val2 = 1000000000 / ad7192_get_temp_scale(unipolar); + return IIO_VAL_INT_PLUS_NANO; default: return -EINVAL; } case IIO_CHAN_INFO_OFFSET: if (!unipolar) - *val -= (1 << (chan->scan_type.realbits - 1)); + *val = -(1 << (chan->scan_type.realbits - 1)); else *val = 0; + /* Kelvin to Celsius */ + if (chan->type == IIO_TEMP) + *val -= 273 * ad7192_get_temp_scale(unipolar); return IIO_VAL_INT; } -- cgit v1.2.3-70-g09d2 From 70e01880a9b2c548d3911d0eed467d664aad5986 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: staging:iio:ad7780: Mark channels as unsigned The values reported by the AD7780 are unsigned with a binary offset: 0x000000 is negative fullscale 0x800000 is zeroscale 0xffffff is positive fullscale So mark the channel in the channel spec as unsigned rather than signed. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7780.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c index 1ece2ac8de5..19ee49c95de 100644 --- a/drivers/staging/iio/adc/ad7780.c +++ b/drivers/staging/iio/adc/ad7780.c @@ -131,9 +131,10 @@ static const struct ad7780_chip_info ad7780_chip_info_tbl[] = { .indexed = 1, .channel = 0, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_type = { - .sign = 's', + .sign = 'u', .realbits = 24, .storagebits = 32, .shift = 8, @@ -146,9 +147,10 @@ static const struct ad7780_chip_info ad7780_chip_info_tbl[] = { .indexed = 1, .channel = 0, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_type = { - .sign = 's', + .sign = 'u', .realbits = 20, .storagebits = 32, .shift = 12, -- cgit v1.2.3-70-g09d2 From 95d1c8c7e26e303ccab5b65fe0ce04f70f42ea8a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 2 Aug 2012 11:10:00 +0100 Subject: iio: lm3533-als: Fix build warnings Fix below build warnings: CC [M] drivers/iio/light/lm3533-als.o drivers/iio/light/lm3533-als.c:667:8: warning: initialization from incompatible pointer type [enabled by default] drivers/iio/light/lm3533-als.c:667:8: warning: (near initialization for 'dev_attr_in_illuminance0_thresh_either_en.show') [enabled by default] drivers/iio/light/lm3533-als.c:667:8: warning: initialization from incompatible pointer type [enabled by default] drivers/iio/light/lm3533-als.c:667:8: warning: (near initialization for 'dev_attr_in_illuminance0_thresh_either_en.store') [enabled by default] Signed-off-by: Axel Lin --- drivers/iio/light/lm3533-als.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c index c3e7bac1312..e45712a921c 100644 --- a/drivers/iio/light/lm3533-als.c +++ b/drivers/iio/light/lm3533-als.c @@ -404,7 +404,7 @@ out: return ret; } -static int show_thresh_either_en(struct device *dev, +static ssize_t show_thresh_either_en(struct device *dev, struct device_attribute *attr, char *buf) { @@ -424,7 +424,7 @@ static int show_thresh_either_en(struct device *dev, return scnprintf(buf, PAGE_SIZE, "%u\n", enable); } -static int store_thresh_either_en(struct device *dev, +static ssize_t store_thresh_either_en(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { -- cgit v1.2.3-70-g09d2 From f3d9d365ff7f36c4e3491ef31788449f419b781b Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Thu, 2 Aug 2012 22:17:48 +0200 Subject: ti-st: Fix check for pdata->chip_awake function pointer ll_device_want_to_wakeup(): Fix the NULL pointer check on pdata->chip_awake, which is performed on the wrong function pointer Signed-off-by: Matthias Kaehlcke Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_ll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c index 1ff460a8e9c..93b4d67cc4a 100644 --- a/drivers/misc/ti-st/st_ll.c +++ b/drivers/misc/ti-st/st_ll.c @@ -87,7 +87,7 @@ static void ll_device_want_to_wakeup(struct st_data_s *st_data) /* communicate to platform about chip wakeup */ kim_data = st_data->kim_data; pdata = kim_data->kim_pdev->dev.platform_data; - if (pdata->chip_asleep) + if (pdata->chip_awake) pdata->chip_awake(NULL); } -- cgit v1.2.3-70-g09d2 From f3261dfb5538e2ff0264fde3050dbd4e922fa296 Mon Sep 17 00:00:00 2001 From: Raphael Assenat Date: Thu, 16 Aug 2012 12:56:40 -0400 Subject: 1-Wire: Add support for the maxim ds1825 temperature sensor This patch adds support for maxim ds1825 based 1-wire temperature sensors. Signed-off-by: Raphael Assenat Signed-off-by: Greg Kroah-Hartman --- Documentation/w1/slaves/w1_therm | 2 ++ drivers/w1/slaves/w1_therm.c | 9 +++++++++ drivers/w1/w1_family.h | 1 + 3 files changed, 12 insertions(+) diff --git a/Documentation/w1/slaves/w1_therm b/Documentation/w1/slaves/w1_therm index 0403aaaba87..874a8ca93fe 100644 --- a/Documentation/w1/slaves/w1_therm +++ b/Documentation/w1/slaves/w1_therm @@ -3,6 +3,7 @@ Kernel driver w1_therm Supported chips: * Maxim ds18*20 based temperature sensors. + * Maxim ds1825 based temperature sensors. Author: Evgeniy Polyakov @@ -15,6 +16,7 @@ supported family codes: W1_THERM_DS18S20 0x10 W1_THERM_DS1822 0x22 W1_THERM_DS18B20 0x28 +W1_THERM_DS1825 0x3B Support is provided through the sysfs w1_slave file. Each open and read sequence will initiate a temperature conversion then provide two diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index d90062b211f..92d08e7fcba 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -91,6 +91,11 @@ static struct w1_family w1_therm_family_DS28EA00 = { .fops = &w1_therm_fops, }; +static struct w1_family w1_therm_family_DS1825 = { + .fid = W1_THERM_DS1825, + .fops = &w1_therm_fops, +}; + struct w1_therm_family_converter { u8 broken; @@ -120,6 +125,10 @@ static struct w1_therm_family_converter w1_therm_families[] = { .f = &w1_therm_family_DS28EA00, .convert = w1_DS18B20_convert_temp }, + { + .f = &w1_therm_family_DS1825, + .convert = w1_DS18B20_convert_temp + } }; static inline int w1_DS18B20_convert_temp(u8 rom[9]) diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index b00ada44a89..a1f0ce151d5 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h @@ -39,6 +39,7 @@ #define W1_EEPROM_DS2431 0x2D #define W1_FAMILY_DS2760 0x30 #define W1_FAMILY_DS2780 0x32 +#define W1_THERM_DS1825 0x3B #define W1_FAMILY_DS2781 0x3D #define W1_THERM_DS28EA00 0x42 -- cgit v1.2.3-70-g09d2 From 1ae811ee27912a0521e4b92dc9a1850c0243a247 Mon Sep 17 00:00:00 2001 From: "bjschuma@gmail.com" Date: Wed, 8 Aug 2012 13:57:06 -0400 Subject: NFS: Fix a regression when loading the NFS v4 module Some systems have a modprobe.d/nfs.conf file that sets an nfs4 alias pointing to nfs.ko, rather than nfs4.ko. This can prevent the v4 module from loading on mount, since the kernel sees that something named "nfs4" has already been loaded. To work around this, I've renamed the modules to "nfsv2.ko" "nfsv3.ko" and "nfsv4.ko". I also had to move the nfs4_fs_type back to nfs.ko to ensure that `mount -t nfs4` still works. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- fs/nfs/Makefile | 18 +++++++++--------- fs/nfs/client.c | 2 +- fs/nfs/nfs4_fs.h | 3 +++ fs/nfs/nfs4super.c | 15 --------------- fs/nfs/super.c | 37 ++++++++++++++++++++++++++++++++++++- 5 files changed, 49 insertions(+), 26 deletions(-) diff --git a/fs/nfs/Makefile b/fs/nfs/Makefile index 8bf3a3f6925..b7db60897f9 100644 --- a/fs/nfs/Makefile +++ b/fs/nfs/Makefile @@ -12,19 +12,19 @@ nfs-$(CONFIG_ROOT_NFS) += nfsroot.o nfs-$(CONFIG_SYSCTL) += sysctl.o nfs-$(CONFIG_NFS_FSCACHE) += fscache.o fscache-index.o -obj-$(CONFIG_NFS_V2) += nfs2.o -nfs2-y := nfs2super.o proc.o nfs2xdr.o +obj-$(CONFIG_NFS_V2) += nfsv2.o +nfsv2-y := nfs2super.o proc.o nfs2xdr.o -obj-$(CONFIG_NFS_V3) += nfs3.o -nfs3-y := nfs3super.o nfs3client.o nfs3proc.o nfs3xdr.o -nfs3-$(CONFIG_NFS_V3_ACL) += nfs3acl.o +obj-$(CONFIG_NFS_V3) += nfsv3.o +nfsv3-y := nfs3super.o nfs3client.o nfs3proc.o nfs3xdr.o +nfsv3-$(CONFIG_NFS_V3_ACL) += nfs3acl.o -obj-$(CONFIG_NFS_V4) += nfs4.o -nfs4-y := nfs4proc.o nfs4xdr.o nfs4state.o nfs4renewd.o nfs4super.o nfs4file.o \ +obj-$(CONFIG_NFS_V4) += nfsv4.o +nfsv4-y := nfs4proc.o nfs4xdr.o nfs4state.o nfs4renewd.o nfs4super.o nfs4file.o \ delegation.o idmap.o callback.o callback_xdr.o callback_proc.o \ nfs4namespace.o nfs4getroot.o nfs4client.o -nfs4-$(CONFIG_SYSCTL) += nfs4sysctl.o -nfs4-$(CONFIG_NFS_V4_1) += pnfs.o pnfs_dev.o +nfsv4-$(CONFIG_SYSCTL) += nfs4sysctl.o +nfsv4-$(CONFIG_NFS_V4_1) += pnfs.o pnfs_dev.o obj-$(CONFIG_PNFS_FILE_LAYOUT) += nfs_layout_nfsv41_files.o nfs_layout_nfsv41_files-y := nfs4filelayout.o nfs4filelayoutdev.o diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 9fc0d9dfc91..99694442b93 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -105,7 +105,7 @@ struct nfs_subversion *get_nfs_version(unsigned int version) if (IS_ERR(nfs)) { mutex_lock(&nfs_version_mutex); - request_module("nfs%d", version); + request_module("nfsv%d", version); nfs = find_nfs_version(version); mutex_unlock(&nfs_version_mutex); } diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 3b950dd81e8..da0618aeead 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -205,6 +205,9 @@ extern const struct dentry_operations nfs4_dentry_operations; int nfs_atomic_open(struct inode *, struct dentry *, struct file *, unsigned, umode_t, int *); +/* super.c */ +extern struct file_system_type nfs4_fs_type; + /* nfs4namespace.c */ rpc_authflavor_t nfs_find_best_sec(struct nfs4_secinfo_flavors *); struct rpc_clnt *nfs4_create_sec_client(struct rpc_clnt *, struct inode *, struct qstr *); diff --git a/fs/nfs/nfs4super.c b/fs/nfs/nfs4super.c index 12a31a9dbcd..bd61221ad2c 100644 --- a/fs/nfs/nfs4super.c +++ b/fs/nfs/nfs4super.c @@ -23,14 +23,6 @@ static struct dentry *nfs4_referral_mount(struct file_system_type *fs_type, static struct dentry *nfs4_remote_referral_mount(struct file_system_type *fs_type, int flags, const char *dev_name, void *raw_data); -static struct file_system_type nfs4_fs_type = { - .owner = THIS_MODULE, - .name = "nfs4", - .mount = nfs_fs_mount, - .kill_sb = nfs_kill_super, - .fs_flags = FS_RENAME_DOES_D_MOVE|FS_REVAL_DOT|FS_BINARY_MOUNTDATA, -}; - static struct file_system_type nfs4_remote_fs_type = { .owner = THIS_MODULE, .name = "nfs4", @@ -344,14 +336,8 @@ static int __init init_nfs_v4(void) if (err) goto out1; - err = register_filesystem(&nfs4_fs_type); - if (err < 0) - goto out2; - register_nfs_version(&nfs_v4); return 0; -out2: - nfs4_unregister_sysctl(); out1: nfs_idmap_quit(); out: @@ -361,7 +347,6 @@ out: static void __exit exit_nfs_v4(void) { unregister_nfs_version(&nfs_v4); - unregister_filesystem(&nfs4_fs_type); nfs4_unregister_sysctl(); nfs_idmap_quit(); } diff --git a/fs/nfs/super.c b/fs/nfs/super.c index ac6a3c55dce..c4a15c55519 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -319,6 +319,34 @@ EXPORT_SYMBOL_GPL(nfs_sops); static void nfs4_validate_mount_flags(struct nfs_parsed_mount_data *); static int nfs4_validate_mount_data(void *options, struct nfs_parsed_mount_data *args, const char *dev_name); + +struct file_system_type nfs4_fs_type = { + .owner = THIS_MODULE, + .name = "nfs4", + .mount = nfs_fs_mount, + .kill_sb = nfs_kill_super, + .fs_flags = FS_RENAME_DOES_D_MOVE|FS_REVAL_DOT|FS_BINARY_MOUNTDATA, +}; +EXPORT_SYMBOL_GPL(nfs4_fs_type); + +static int __init register_nfs4_fs(void) +{ + return register_filesystem(&nfs4_fs_type); +} + +static void unregister_nfs4_fs(void) +{ + unregister_filesystem(&nfs4_fs_type); +} +#else +static int __init register_nfs4_fs(void) +{ + return 0; +} + +static void unregister_nfs4_fs(void) +{ +} #endif static struct shrinker acl_shrinker = { @@ -337,12 +365,18 @@ int __init register_nfs_fs(void) if (ret < 0) goto error_0; - ret = nfs_register_sysctl(); + ret = register_nfs4_fs(); if (ret < 0) goto error_1; + + ret = nfs_register_sysctl(); + if (ret < 0) + goto error_2; register_shrinker(&acl_shrinker); return 0; +error_2: + unregister_nfs4_fs(); error_1: unregister_filesystem(&nfs_fs_type); error_0: @@ -356,6 +390,7 @@ void __exit unregister_nfs_fs(void) { unregister_shrinker(&acl_shrinker); nfs_unregister_sysctl(); + unregister_nfs4_fs(); unregister_filesystem(&nfs_fs_type); } -- cgit v1.2.3-70-g09d2 From 425e776d93a7a5070b77d4f458a5bab0f924652c Mon Sep 17 00:00:00 2001 From: "bjschuma@gmail.com" Date: Wed, 8 Aug 2012 13:57:10 -0400 Subject: NFS: Alias the nfs module to nfs4 This allows distros to remove the line from their modprobe configuration. Signed-off-by: Bryan Schumaker Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index c4a15c55519..239aff7338e 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2680,4 +2680,6 @@ MODULE_PARM_DESC(max_session_slots, "Maximum number of outstanding NFSv4.1 " module_param(send_implementation_id, ushort, 0644); MODULE_PARM_DESC(send_implementation_id, "Send implementation ID with NFSv4.1 exchange_id"); +MODULE_ALIAS("nfs4"); + #endif /* CONFIG_NFS_V4 */ -- cgit v1.2.3-70-g09d2 From 519d3959e30a98f8e135e7a16647c10af5ad63d5 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 14 Aug 2012 17:30:10 -0400 Subject: NFSv4: Fix pointer arithmetic in decode_getacl Resetting the cursor xdr->p to a previous value is not a safe practice: if the xdr_stream has crossed out of the initial iovec, then a bunch of other fields would need to be reset too. Fix this issue by using xdr_enter_page() so that the buffer gets page aligned at the bitmap _before_ we decode it. Also fix the confusion of the ACL length with the page buffer length by not adding the base offset to the ACL length... Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 2 +- fs/nfs/nfs4xdr.c | 21 +++++++-------------- 2 files changed, 8 insertions(+), 15 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index c77d296bdaa..286ab707841 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3819,7 +3819,7 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu if (ret) goto out_free; - acl_len = res.acl_len - res.acl_data_offset; + acl_len = res.acl_len; if (acl_len > args.acl_len) nfs4_write_cached_acl(inode, NULL, 0, acl_len); else diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index ca13483edd6..54d3f5a9faa 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -5049,18 +5049,14 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, uint32_t attrlen, bitmap[3] = {0}; int status; - size_t page_len = xdr->buf->page_len; res->acl_len = 0; if ((status = decode_op_hdr(xdr, OP_GETATTR)) != 0) goto out; + xdr_enter_page(xdr, xdr->buf->page_len); + bm_p = xdr->p; - res->acl_data_offset = be32_to_cpup(bm_p) + 2; - res->acl_data_offset <<= 2; - /* Check if the acl data starts beyond the allocated buffer */ - if (res->acl_data_offset > page_len) - return -ERANGE; if ((status = decode_attr_bitmap(xdr, bitmap)) != 0) goto out; @@ -5074,23 +5070,20 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, /* The bitmap (xdr len + bitmaps) and the attr xdr len words * are stored with the acl data to handle the problem of * variable length bitmaps.*/ - xdr->p = bm_p; + res->acl_data_offset = (xdr->p - bm_p) << 2; /* We ignore &savep and don't do consistency checks on * the attr length. Let userspace figure it out.... */ - attrlen += res->acl_data_offset; - if (attrlen > page_len) { + res->acl_len = attrlen; + if (attrlen + res->acl_data_offset > xdr->buf->page_len) { if (res->acl_flags & NFS4_ACL_LEN_REQUEST) { /* getxattr interface called with a NULL buf */ - res->acl_len = attrlen; goto out; } - dprintk("NFS: acl reply: attrlen %u > page_len %zu\n", - attrlen, page_len); + dprintk("NFS: acl reply: attrlen %u > page_len %u\n", + attrlen, xdr->buf->page_len); return -EINVAL; } - xdr_read_pages(xdr, attrlen); - res->acl_len = attrlen; } else status = -EOPNOTSUPP; -- cgit v1.2.3-70-g09d2 From b291f1b1c86aa0c7bc3df2994e6a1a4e53f1fde0 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 14 Aug 2012 18:30:41 -0400 Subject: NFSv4: Fix the acl cache size calculation Currently, we do not take into account the size of the 16 byte struct nfs4_cached_acl header, when deciding whether or not we should cache the acl data. Consequently, we will end up allocating an 8k buffer in order to fit a maximum size 4k acl. This patch adjusts the calculation so that we limit the cache size to 4k for the acl header+data. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 286ab707841..635274140b1 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3737,9 +3737,10 @@ out: static void nfs4_write_cached_acl(struct inode *inode, struct page **pages, size_t pgbase, size_t acl_len) { struct nfs4_cached_acl *acl; + size_t buflen = sizeof(*acl) + acl_len; - if (pages && acl_len <= PAGE_SIZE) { - acl = kmalloc(sizeof(*acl) + acl_len, GFP_KERNEL); + if (pages && buflen <= PAGE_SIZE) { + acl = kmalloc(buflen, GFP_KERNEL); if (acl == NULL) goto out; acl->cached = 1; -- cgit v1.2.3-70-g09d2 From cff298c721099c9ac4cea7196a37097ba2847946 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 14 Aug 2012 17:14:17 -0400 Subject: NFSv4: Don't use private xdr_stream fields in decode_getacl Instead of using the private field xdr->p from struct xdr_stream, use the public xdr_stream_pos(). Signed-off-by: Trond Myklebust --- fs/nfs/nfs4xdr.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 54d3f5a9faa..1bfbd67c556 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -5045,10 +5045,10 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, struct nfs_getaclres *res) { unsigned int savep; - __be32 *bm_p; uint32_t attrlen, bitmap[3] = {0}; int status; + unsigned int pg_offset; res->acl_len = 0; if ((status = decode_op_hdr(xdr, OP_GETATTR)) != 0) @@ -5056,7 +5056,8 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, xdr_enter_page(xdr, xdr->buf->page_len); - bm_p = xdr->p; + /* Calculate the offset of the page data */ + pg_offset = xdr->buf->head[0].iov_len; if ((status = decode_attr_bitmap(xdr, bitmap)) != 0) goto out; @@ -5070,18 +5071,18 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, /* The bitmap (xdr len + bitmaps) and the attr xdr len words * are stored with the acl data to handle the problem of * variable length bitmaps.*/ - res->acl_data_offset = (xdr->p - bm_p) << 2; + res->acl_data_offset = xdr_stream_pos(xdr) - pg_offset; /* We ignore &savep and don't do consistency checks on * the attr length. Let userspace figure it out.... */ res->acl_len = attrlen; - if (attrlen + res->acl_data_offset > xdr->buf->page_len) { + if (attrlen > (xdr->nwords << 2)) { if (res->acl_flags & NFS4_ACL_LEN_REQUEST) { /* getxattr interface called with a NULL buf */ goto out; } dprintk("NFS: acl reply: attrlen %u > page_len %u\n", - attrlen, xdr->buf->page_len); + attrlen, xdr->nwords << 2); return -EINVAL; } } else -- cgit v1.2.3-70-g09d2 From c5066945b7ea346a11424dbeb7830b7d7d00c206 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Thu, 9 Aug 2012 14:05:49 -0400 Subject: NFS: Clear key construction data if the idmap upcall fails idmap_pipe_downcall already clears this field if the upcall succeeds, but if it fails (rpc.idmapd isn't running) the field will still be set on the next call triggering a BUG_ON(). This patch tries to handle all possible ways that the upcall could fail and clear the idmap key data for each one. Signed-off-by: Bryan Schumaker Tested-by: William Dauchy Cc: stable@vger.kernel.org [>= 3.4] Signed-off-by: Trond Myklebust --- fs/nfs/idmap.c | 56 ++++++++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 42 insertions(+), 14 deletions(-) diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c index b701358c39c..6703c73307a 100644 --- a/fs/nfs/idmap.c +++ b/fs/nfs/idmap.c @@ -61,6 +61,12 @@ struct idmap { struct mutex idmap_mutex; }; +struct idmap_legacy_upcalldata { + struct rpc_pipe_msg pipe_msg; + struct idmap_msg idmap_msg; + struct idmap *idmap; +}; + /** * nfs_fattr_init_names - initialise the nfs_fattr owner_name/group_name fields * @fattr: fully initialised struct nfs_fattr @@ -324,6 +330,7 @@ static ssize_t nfs_idmap_get_key(const char *name, size_t namelen, ret = nfs_idmap_request_key(&key_type_id_resolver_legacy, name, namelen, type, data, data_size, idmap); + idmap->idmap_key_cons = NULL; mutex_unlock(&idmap->idmap_mutex); } return ret; @@ -380,11 +387,13 @@ static const match_table_t nfs_idmap_tokens = { static int nfs_idmap_legacy_upcall(struct key_construction *, const char *, void *); static ssize_t idmap_pipe_downcall(struct file *, const char __user *, size_t); +static void idmap_release_pipe(struct inode *); static void idmap_pipe_destroy_msg(struct rpc_pipe_msg *); static const struct rpc_pipe_ops idmap_upcall_ops = { .upcall = rpc_pipe_generic_upcall, .downcall = idmap_pipe_downcall, + .release_pipe = idmap_release_pipe, .destroy_msg = idmap_pipe_destroy_msg, }; @@ -616,7 +625,8 @@ void nfs_idmap_quit(void) nfs_idmap_quit_keyring(); } -static int nfs_idmap_prepare_message(char *desc, struct idmap_msg *im, +static int nfs_idmap_prepare_message(char *desc, struct idmap *idmap, + struct idmap_msg *im, struct rpc_pipe_msg *msg) { substring_t substr; @@ -659,6 +669,7 @@ static int nfs_idmap_legacy_upcall(struct key_construction *cons, const char *op, void *aux) { + struct idmap_legacy_upcalldata *data; struct rpc_pipe_msg *msg; struct idmap_msg *im; struct idmap *idmap = (struct idmap *)aux; @@ -666,15 +677,15 @@ static int nfs_idmap_legacy_upcall(struct key_construction *cons, int ret = -ENOMEM; /* msg and im are freed in idmap_pipe_destroy_msg */ - msg = kmalloc(sizeof(*msg), GFP_KERNEL); - if (!msg) - goto out0; - - im = kmalloc(sizeof(*im), GFP_KERNEL); - if (!im) + data = kmalloc(sizeof(*data), GFP_KERNEL); + if (!data) goto out1; - ret = nfs_idmap_prepare_message(key->description, im, msg); + msg = &data->pipe_msg; + im = &data->idmap_msg; + data->idmap = idmap; + + ret = nfs_idmap_prepare_message(key->description, idmap, im, msg); if (ret < 0) goto out2; @@ -683,15 +694,15 @@ static int nfs_idmap_legacy_upcall(struct key_construction *cons, ret = rpc_queue_upcall(idmap->idmap_pipe, msg); if (ret < 0) - goto out2; + goto out3; return ret; +out3: + idmap->idmap_key_cons = NULL; out2: - kfree(im); + kfree(data); out1: - kfree(msg); -out0: complete_request_key(cons, ret); return ret; } @@ -775,9 +786,26 @@ out_incomplete: static void idmap_pipe_destroy_msg(struct rpc_pipe_msg *msg) { + struct idmap_legacy_upcalldata *data = container_of(msg, + struct idmap_legacy_upcalldata, + pipe_msg); + struct idmap *idmap = data->idmap; + struct key_construction *cons; + if (msg->errno) { + cons = ACCESS_ONCE(idmap->idmap_key_cons); + idmap->idmap_key_cons = NULL; + complete_request_key(cons, msg->errno); + } /* Free memory allocated in nfs_idmap_legacy_upcall() */ - kfree(msg->data); - kfree(msg); + kfree(data); +} + +static void +idmap_release_pipe(struct inode *inode) +{ + struct rpc_inode *rpci = RPC_I(inode); + struct idmap *idmap = (struct idmap *)rpci->private; + idmap->idmap_key_cons = NULL; } int nfs_map_name_to_uid(const struct nfs_server *server, const char *name, size_t namelen, __u32 *uid) -- cgit v1.2.3-70-g09d2 From 12dfd080556124088ed61a292184947711b46cbe Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Thu, 9 Aug 2012 14:05:50 -0400 Subject: NFS: return -ENOKEY when the upcall fails to map the name This allows the normal error-paths to handle the error, rather than making a special call to complete_request_key() just for this instance. Signed-off-by: Bryan Schumaker Tested-by: William Dauchy Cc: stable@vger.kernel.org [>= 3.4] Signed-off-by: Trond Myklebust --- fs/nfs/idmap.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c index 6703c73307a..a850079467d 100644 --- a/fs/nfs/idmap.c +++ b/fs/nfs/idmap.c @@ -760,9 +760,8 @@ idmap_pipe_downcall(struct file *filp, const char __user *src, size_t mlen) } if (!(im.im_status & IDMAP_STATUS_SUCCESS)) { - ret = mlen; - complete_request_key(cons, -ENOKEY); - goto out_incomplete; + ret = -ENOKEY; + goto out; } namelen_in = strnlen(im.im_name, IDMAP_NAMESZ); @@ -779,7 +778,6 @@ idmap_pipe_downcall(struct file *filp, const char __user *src, size_t mlen) out: complete_request_key(cons, ret); -out_incomplete: return ret; } -- cgit v1.2.3-70-g09d2 From 16c0b164bd24d44db137693a36b428ba28970c62 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 15 Aug 2012 20:44:27 +0000 Subject: act_mirred: do not drop packets when fails to mirror it We drop packet unconditionally when we fail to mirror it. This is not intended in some cases. Consdier for kvm guest, we may mirror the traffic of the bridge to a tap device used by a VM. When kernel fails to mirror the packet in conditions such as when qemu crashes or stop polling the tap, it's hard for the management software to detect such condition and clean the the mirroring before. This would lead all packets to the bridge to be dropped and break the netowrk of other virtual machines. To solve the issue, the patch does not drop packets when kernel fails to mirror it, and only drop the redirected packets. Signed-off-by: Jason Wang Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- net/sched/act_mirred.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index fe81cc18e9e..9c0fd0c7881 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -200,13 +200,12 @@ static int tcf_mirred(struct sk_buff *skb, const struct tc_action *a, out: if (err) { m->tcf_qstats.overlimits++; - /* should we be asking for packet to be dropped? - * may make sense for redirect case only - */ - retval = TC_ACT_SHOT; - } else { + if (m->tcfm_eaction != TCA_EGRESS_MIRROR) + retval = TC_ACT_SHOT; + else + retval = m->tcf_action; + } else retval = m->tcf_action; - } spin_unlock(&m->tcf_lock); return retval; -- cgit v1.2.3-70-g09d2 From f796c20cf67aa54c9130d0dc41307c0025719b85 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 14 Aug 2012 12:34:24 +0000 Subject: net: netprio: fix files lock and remove useless d_path bits Add lock to prevent a race with a file closing and also remove useless and ugly sscanf code. The extra code was never needed and the case it supposedly protected against is in fact handled correctly by sock_from_file as pointed out by Al Viro. CC: Neil Horman Reported-by: Al Viro Signed-off-by: John Fastabend Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/core/netprio_cgroup.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) diff --git a/net/core/netprio_cgroup.c b/net/core/netprio_cgroup.c index ed0c0431fcd..f65dba3afd9 100644 --- a/net/core/netprio_cgroup.c +++ b/net/core/netprio_cgroup.c @@ -277,12 +277,6 @@ out_free_devname: void net_prio_attach(struct cgroup *cgrp, struct cgroup_taskset *tset) { struct task_struct *p; - char *tmp = kzalloc(sizeof(char) * PATH_MAX, GFP_KERNEL); - - if (!tmp) { - pr_warn("Unable to attach cgrp due to alloc failure!\n"); - return; - } cgroup_taskset_for_each(p, cgrp, tset) { unsigned int fd; @@ -296,32 +290,24 @@ void net_prio_attach(struct cgroup *cgrp, struct cgroup_taskset *tset) continue; } - rcu_read_lock(); + spin_lock(&files->file_lock); fdt = files_fdtable(files); for (fd = 0; fd < fdt->max_fds; fd++) { - char *path; struct file *file; struct socket *sock; - unsigned long s; - int rv, err = 0; + int err; file = fcheck_files(files, fd); if (!file) continue; - path = d_path(&file->f_path, tmp, PAGE_SIZE); - rv = sscanf(path, "socket:[%lu]", &s); - if (rv <= 0) - continue; - sock = sock_from_file(file, &err); - if (!err) + if (sock) sock_update_netprioidx(sock->sk, p); } - rcu_read_unlock(); + spin_unlock(&files->file_lock); task_unlock(p); } - kfree(tmp); } static struct cftype ss_files[] = { -- cgit v1.2.3-70-g09d2 From 48a87cc26c13b68f6cce4e9d769fcb17a6b3e4b8 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 14 Aug 2012 12:34:30 +0000 Subject: net: netprio: fd passed in SCM_RIGHTS datagram not set correctly A socket fd passed in a SCM_RIGHTS datagram was not getting updated with the new tasks cgrp prioidx. This leaves IO on the socket tagged with the old tasks priority. To fix this add a check in the scm recvmsg path to update the sock cgrp prioidx with the new tasks value. Thanks to Al Viro for catching this. CC: Neil Horman Reported-by: Al Viro Signed-off-by: John Fastabend Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/core/scm.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/core/scm.c b/net/core/scm.c index 8f6ccfd68ef..040cebeed45 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -265,6 +265,7 @@ void scm_detach_fds(struct msghdr *msg, struct scm_cookie *scm) for (i=0, cmfptr=(__force int __user *)CMSG_DATA(cm); isk, current); fd_install(new_fd, fp[i]); } -- cgit v1.2.3-70-g09d2 From 476ad154f3b41dd7d9a08a2f641e28388abc2fd1 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 14 Aug 2012 12:34:35 +0000 Subject: net: netprio: fix cgrp create and write priomap race A race exists where creating cgroups and also updating the priomap may result in losing a priomap update. This is because priomap writers are not protected by rtnl_lock. Move priority writer into rtnl_lock()/rtnl_unlock(). CC: Neil Horman Reported-by: Al Viro Signed-off-by: John Fastabend Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/core/netprio_cgroup.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/net/core/netprio_cgroup.c b/net/core/netprio_cgroup.c index f65dba3afd9..c75e3f9d060 100644 --- a/net/core/netprio_cgroup.c +++ b/net/core/netprio_cgroup.c @@ -101,12 +101,10 @@ static int write_update_netdev_table(struct net_device *dev) u32 max_len; struct netprio_map *map; - rtnl_lock(); max_len = atomic_read(&max_prioidx) + 1; map = rtnl_dereference(dev->priomap); if (!map || map->priomap_len < max_len) ret = extend_netdev_table(dev, max_len); - rtnl_unlock(); return ret; } @@ -256,17 +254,17 @@ static int write_priomap(struct cgroup *cgrp, struct cftype *cft, if (!dev) goto out_free_devname; + rtnl_lock(); ret = write_update_netdev_table(dev); if (ret < 0) goto out_put_dev; - rcu_read_lock(); - map = rcu_dereference(dev->priomap); + map = rtnl_dereference(dev->priomap); if (map) map->priomap[prioidx] = priority; - rcu_read_unlock(); out_put_dev: + rtnl_unlock(); dev_put(dev); out_free_devname: -- cgit v1.2.3-70-g09d2 From e7d6582e04212943d23d6e42b86ede5d9a0ebe04 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 3 Aug 2012 16:08:36 +1000 Subject: m68knommu: select CONFIG_HAVE_CLK for ColdFire CPU types The ColdFire CPU sub-arch has kernel clk code support, so select CONFIG_HAVE_CLK. Signed-off-by: Greg Ungerer --- arch/m68k/Kconfig.cpu | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 82068349a2b..59eb9f35980 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -28,6 +28,7 @@ config COLDFIRE select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 select GENERIC_CSUM + select HAVE_CLK endchoice -- cgit v1.2.3-70-g09d2 From 42b1b94635a467407841c89e91d9209c55f6bc61 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 14 Aug 2012 14:31:33 +1000 Subject: m68k: select CONFIG_GENERIC_ATOMIC64 for all m68k CPU types There is no specific atomic64 support code for any m68k CPUs, so we should select CONFIG_GENERIC_ATOMC64 for all. Remove the existing per CPU selection of this and select it for all m68k. Signed-off-by: Greg Ungerer Acked-by: Fengguang Wu Acked-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 1 + arch/m68k/Kconfig.cpu | 4 ---- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 4a469907f04..b22df9410dc 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -5,6 +5,7 @@ config M68K select HAVE_AOUT if MMU select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW + select GENERIC_ATOMIC64 select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select GENERIC_CPU_DEVICES select GENERIC_STRNCPY_FROM_USER if MMU diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 59eb9f35980..c4eb79edece 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -59,7 +59,6 @@ config MCPU32 config M68020 bool "68020 support" depends on MMU - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68020 @@ -70,7 +69,6 @@ config M68020 config M68030 bool "68030 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68030 @@ -80,7 +78,6 @@ config M68030 config M68040 bool "68040 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68LC040 @@ -91,7 +88,6 @@ config M68040 config M68060 bool "68060 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68060 -- cgit v1.2.3-70-g09d2 From f0e0e9bba5eed2086f6001be14f21566a49bed10 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Mon, 30 Jul 2012 13:19:07 -0700 Subject: tcm_vhost: Fix incorrect IS_ERR() usage in vhost_scsi_map_iov_to_sgl Fix up a new coccinelle warnings reported by Fengguang Wu + Intel 0-DAY kernel build testing backend: drivers/vhost/tcm_vhost.c:537:23-29: ERROR: allocation function on line 533 returns NULL not ERR_PTR on failure vim +537 drivers/vhost/tcm_vhost.c 534 if (!sg) 535 return -ENOMEM; 536 pr_debug("%s sg %p sgl_count %u is_err %ld\n", __func__, > 537 sg, sgl_count, IS_ERR(sg)); 538 sg_init_table(sg, sgl_count); 539 540 tv_cmd->tvc_sgl = sg; Signed-off-by: Fengguang Wu Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index fb366540ed5..481af88a5ff 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -533,8 +533,8 @@ static int vhost_scsi_map_iov_to_sgl(struct tcm_vhost_cmd *tv_cmd, sg = kmalloc(sizeof(tv_cmd->tvc_sgl[0]) * sgl_count, GFP_ATOMIC); if (!sg) return -ENOMEM; - pr_debug("%s sg %p sgl_count %u is_err %ld\n", __func__, - sg, sgl_count, IS_ERR(sg)); + pr_debug("%s sg %p sgl_count %u is_err %d\n", __func__, + sg, sgl_count, !sg); sg_init_table(sg, sgl_count); tv_cmd->tvc_sgl = sg; -- cgit v1.2.3-70-g09d2 From 101998f6fcd680ed12d85633b81504feb1cb0667 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 30 Jul 2012 13:30:00 -0700 Subject: tcm_vhost: Post-merge review changes requested by MST This patch contains the post RFC-v5 (post-merge) changes, this includes: - Add locking comment - Move vhost_scsi_complete_cmd ahead of TFO callbacks in order to drop forward declarations - Drop extra '!= NULL' usage in vhost_scsi_complete_cmd_work() - Change vhost_scsi_*_handle_kick() to use pr_debug - Fix possible race in vhost_scsi_set_endpoint() for vs->vs_tpg checking + assignment. - Convert tv_tpg->tpg_vhost_count + ->tv_tpg_port_count from atomic_t -> int, and make sure reference is protected by ->tv_tpg_mutex. - Drop unnecessary vhost_scsi->vhost_ref_cnt - Add 'err:' label for exception path in vhost_scsi_clear_endpoint() - Add enum for VQ numbers, add usage in vhost_scsi_open() - Add vhost_scsi_flush() + vhost_scsi_flush_vq() following drivers/vhost/net.c - Add smp_wmb() + vhost_scsi_flush() call during vhost_scsi_set_features() - Drop unnecessary copy_from_user() usage with GET_ABI_VERSION ioctl - Add missing vhost_scsi_compat_ioctl() caller for vhost_scsi_fops - Fix function parameter definition first line to follow existing vhost code style - Change 'vHost' usage -> 'vhost' in handful of locations - Change -EPERM -> -EBUSY usage for two failures in tcm_vhost_drop_nexus() - Add comment for tcm_vhost_workqueue in tcm_vhost_init() - Make GET_ABI_VERSION return 'int' + add comment in tcm_vhost.h Reported-by: Michael S. Tsirkin Cc: Michael S. Tsirkin Cc: Stefan Hajnoczi Cc: Anthony Liguori Cc: Zhi Yong Wu Cc: Paolo Bonzini Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 195 +++++++++++++++++++++++++--------------------- drivers/vhost/tcm_vhost.h | 9 ++- 2 files changed, 111 insertions(+), 93 deletions(-) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index 481af88a5ff..74b2edaaf1f 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -53,9 +53,14 @@ #include "vhost.h" #include "tcm_vhost.h" +enum { + VHOST_SCSI_VQ_CTL = 0, + VHOST_SCSI_VQ_EVT = 1, + VHOST_SCSI_VQ_IO = 2, +}; + struct vhost_scsi { - atomic_t vhost_ref_cnt; - struct tcm_vhost_tpg *vs_tpg; + struct tcm_vhost_tpg *vs_tpg; /* Protected by vhost_scsi->dev.mutex */ struct vhost_dev dev; struct vhost_virtqueue vqs[3]; @@ -131,8 +136,7 @@ static u32 tcm_vhost_get_default_depth(struct se_portal_group *se_tpg) return 1; } -static u32 tcm_vhost_get_pr_transport_id( - struct se_portal_group *se_tpg, +static u32 tcm_vhost_get_pr_transport_id(struct se_portal_group *se_tpg, struct se_node_acl *se_nacl, struct t10_pr_registration *pr_reg, int *format_code, @@ -162,8 +166,7 @@ static u32 tcm_vhost_get_pr_transport_id( format_code, buf); } -static u32 tcm_vhost_get_pr_transport_id_len( - struct se_portal_group *se_tpg, +static u32 tcm_vhost_get_pr_transport_id_len(struct se_portal_group *se_tpg, struct se_node_acl *se_nacl, struct t10_pr_registration *pr_reg, int *format_code) @@ -192,8 +195,7 @@ static u32 tcm_vhost_get_pr_transport_id_len( format_code); } -static char *tcm_vhost_parse_pr_out_transport_id( - struct se_portal_group *se_tpg, +static char *tcm_vhost_parse_pr_out_transport_id(struct se_portal_group *se_tpg, const char *buf, u32 *out_tid_len, char **port_nexus_ptr) @@ -236,8 +238,7 @@ static struct se_node_acl *tcm_vhost_alloc_fabric_acl( return &nacl->se_node_acl; } -static void tcm_vhost_release_fabric_acl( - struct se_portal_group *se_tpg, +static void tcm_vhost_release_fabric_acl(struct se_portal_group *se_tpg, struct se_node_acl *se_nacl) { struct tcm_vhost_nacl *nacl = container_of(se_nacl, @@ -297,7 +298,16 @@ static int tcm_vhost_get_cmd_state(struct se_cmd *se_cmd) return 0; } -static void vhost_scsi_complete_cmd(struct tcm_vhost_cmd *); +static void vhost_scsi_complete_cmd(struct tcm_vhost_cmd *tv_cmd) +{ + struct vhost_scsi *vs = tv_cmd->tvc_vhost; + + spin_lock_bh(&vs->vs_completion_lock); + list_add_tail(&tv_cmd->tvc_completion_list, &vs->vs_completion_list); + spin_unlock_bh(&vs->vs_completion_lock); + + vhost_work_queue(&vs->dev, &vs->vs_completion_work); +} static int tcm_vhost_queue_data_in(struct se_cmd *se_cmd) { @@ -381,7 +391,7 @@ static void vhost_scsi_complete_cmd_work(struct vhost_work *work) vs_completion_work); struct tcm_vhost_cmd *tv_cmd; - while ((tv_cmd = vhost_scsi_get_cmd_from_completion(vs)) != NULL) { + while ((tv_cmd = vhost_scsi_get_cmd_from_completion(vs))) { struct virtio_scsi_cmd_resp v_rsp; struct se_cmd *se_cmd = &tv_cmd->tvc_se_cmd; int ret; @@ -408,19 +418,6 @@ static void vhost_scsi_complete_cmd_work(struct vhost_work *work) vhost_signal(&vs->dev, &vs->vqs[2]); } -static void vhost_scsi_complete_cmd(struct tcm_vhost_cmd *tv_cmd) -{ - struct vhost_scsi *vs = tv_cmd->tvc_vhost; - - pr_debug("%s tv_cmd %p\n", __func__, tv_cmd); - - spin_lock_bh(&vs->vs_completion_lock); - list_add_tail(&tv_cmd->tvc_completion_list, &vs->vs_completion_list); - spin_unlock_bh(&vs->vs_completion_lock); - - vhost_work_queue(&vs->dev, &vs->vs_completion_work); -} - static struct tcm_vhost_cmd *vhost_scsi_allocate_cmd( struct tcm_vhost_tpg *tv_tpg, struct virtio_scsi_cmd_req *v_req, @@ -787,12 +784,12 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs) static void vhost_scsi_ctl_handle_kick(struct vhost_work *work) { - pr_err("%s: The handling func for control queue.\n", __func__); + pr_debug("%s: The handling func for control queue.\n", __func__); } static void vhost_scsi_evt_handle_kick(struct vhost_work *work) { - pr_err("%s: The handling func for event queue.\n", __func__); + pr_debug("%s: The handling func for event queue.\n", __func__); } static void vhost_scsi_handle_kick(struct vhost_work *work) @@ -825,11 +822,6 @@ static int vhost_scsi_set_endpoint( return -EFAULT; } } - - if (vs->vs_tpg) { - mutex_unlock(&vs->dev.mutex); - return -EEXIST; - } mutex_unlock(&vs->dev.mutex); mutex_lock(&tcm_vhost_mutex); @@ -839,7 +831,7 @@ static int vhost_scsi_set_endpoint( mutex_unlock(&tv_tpg->tv_tpg_mutex); continue; } - if (atomic_read(&tv_tpg->tv_tpg_vhost_count)) { + if (tv_tpg->tv_tpg_vhost_count != 0) { mutex_unlock(&tv_tpg->tv_tpg_mutex); continue; } @@ -847,14 +839,20 @@ static int vhost_scsi_set_endpoint( if (!strcmp(tv_tport->tport_name, t->vhost_wwpn) && (tv_tpg->tport_tpgt == t->vhost_tpgt)) { - atomic_inc(&tv_tpg->tv_tpg_vhost_count); - smp_mb__after_atomic_inc(); + tv_tpg->tv_tpg_vhost_count++; mutex_unlock(&tv_tpg->tv_tpg_mutex); mutex_unlock(&tcm_vhost_mutex); mutex_lock(&vs->dev.mutex); + if (vs->vs_tpg) { + mutex_unlock(&vs->dev.mutex); + mutex_lock(&tv_tpg->tv_tpg_mutex); + tv_tpg->tv_tpg_vhost_count--; + mutex_unlock(&tv_tpg->tv_tpg_mutex); + return -EEXIST; + } + vs->vs_tpg = tv_tpg; - atomic_inc(&vs->vhost_ref_cnt); smp_mb__after_atomic_inc(); mutex_unlock(&vs->dev.mutex); return 0; @@ -871,38 +869,42 @@ static int vhost_scsi_clear_endpoint( { struct tcm_vhost_tport *tv_tport; struct tcm_vhost_tpg *tv_tpg; - int index; + int index, ret; mutex_lock(&vs->dev.mutex); /* Verify that ring has been setup correctly. */ for (index = 0; index < vs->dev.nvqs; ++index) { if (!vhost_vq_access_ok(&vs->vqs[index])) { - mutex_unlock(&vs->dev.mutex); - return -EFAULT; + ret = -EFAULT; + goto err; } } if (!vs->vs_tpg) { - mutex_unlock(&vs->dev.mutex); - return -ENODEV; + ret = -ENODEV; + goto err; } tv_tpg = vs->vs_tpg; tv_tport = tv_tpg->tport; if (strcmp(tv_tport->tport_name, t->vhost_wwpn) || (tv_tpg->tport_tpgt != t->vhost_tpgt)) { - mutex_unlock(&vs->dev.mutex); pr_warn("tv_tport->tport_name: %s, tv_tpg->tport_tpgt: %hu" " does not match t->vhost_wwpn: %s, t->vhost_tpgt: %hu\n", tv_tport->tport_name, tv_tpg->tport_tpgt, t->vhost_wwpn, t->vhost_tpgt); - return -EINVAL; + ret = -EINVAL; + goto err; } - atomic_dec(&tv_tpg->tv_tpg_vhost_count); + tv_tpg->tv_tpg_vhost_count--; vs->vs_tpg = NULL; mutex_unlock(&vs->dev.mutex); return 0; + +err: + mutex_unlock(&vs->dev.mutex); + return ret; } static int vhost_scsi_open(struct inode *inode, struct file *f) @@ -918,9 +920,9 @@ static int vhost_scsi_open(struct inode *inode, struct file *f) INIT_LIST_HEAD(&s->vs_completion_list); spin_lock_init(&s->vs_completion_lock); - s->vqs[0].handle_kick = vhost_scsi_ctl_handle_kick; - s->vqs[1].handle_kick = vhost_scsi_evt_handle_kick; - s->vqs[2].handle_kick = vhost_scsi_handle_kick; + s->vqs[VHOST_SCSI_VQ_CTL].handle_kick = vhost_scsi_ctl_handle_kick; + s->vqs[VHOST_SCSI_VQ_EVT].handle_kick = vhost_scsi_evt_handle_kick; + s->vqs[VHOST_SCSI_VQ_IO].handle_kick = vhost_scsi_handle_kick; r = vhost_dev_init(&s->dev, s->vqs, 3); if (r < 0) { kfree(s); @@ -949,6 +951,18 @@ static int vhost_scsi_release(struct inode *inode, struct file *f) return 0; } +static void vhost_scsi_flush_vq(struct vhost_scsi *vs, int index) +{ + vhost_poll_flush(&vs->dev.vqs[index].poll); +} + +static void vhost_scsi_flush(struct vhost_scsi *vs) +{ + vhost_scsi_flush_vq(vs, VHOST_SCSI_VQ_CTL); + vhost_scsi_flush_vq(vs, VHOST_SCSI_VQ_EVT); + vhost_scsi_flush_vq(vs, VHOST_SCSI_VQ_IO); +} + static int vhost_scsi_set_features(struct vhost_scsi *vs, u64 features) { if (features & ~VHOST_FEATURES) @@ -961,7 +975,8 @@ static int vhost_scsi_set_features(struct vhost_scsi *vs, u64 features) return -EFAULT; } vs->dev.acked_features = features; - /* TODO possibly smp_wmb() and flush vqs */ + smp_wmb(); + vhost_scsi_flush(vs); mutex_unlock(&vs->dev.mutex); return 0; } @@ -974,7 +989,7 @@ static long vhost_scsi_ioctl(struct file *f, unsigned int ioctl, void __user *argp = (void __user *)arg; u64 __user *featurep = argp; u64 features; - int r; + int r, abi_version = VHOST_SCSI_ABI_VERSION; switch (ioctl) { case VHOST_SCSI_SET_ENDPOINT: @@ -988,12 +1003,7 @@ static long vhost_scsi_ioctl(struct file *f, unsigned int ioctl, return vhost_scsi_clear_endpoint(vs, &backend); case VHOST_SCSI_GET_ABI_VERSION: - if (copy_from_user(&backend, argp, sizeof backend)) - return -EFAULT; - - backend.abi_version = VHOST_SCSI_ABI_VERSION; - - if (copy_to_user(argp, &backend, sizeof backend)) + if (copy_to_user(argp, &abi_version, sizeof abi_version)) return -EFAULT; return 0; case VHOST_GET_FEATURES: @@ -1013,11 +1023,21 @@ static long vhost_scsi_ioctl(struct file *f, unsigned int ioctl, } } +#ifdef CONFIG_COMPAT +static long vhost_scsi_compat_ioctl(struct file *f, unsigned int ioctl, + unsigned long arg) +{ + return vhost_scsi_ioctl(f, ioctl, (unsigned long)compat_ptr(arg)); +} +#endif + static const struct file_operations vhost_scsi_fops = { .owner = THIS_MODULE, .release = vhost_scsi_release, .unlocked_ioctl = vhost_scsi_ioctl, - /* TODO compat ioctl? */ +#ifdef CONFIG_COMPAT + .compat_ioctl = vhost_scsi_compat_ioctl, +#endif .open = vhost_scsi_open, .llseek = noop_llseek, }; @@ -1054,28 +1074,28 @@ static char *tcm_vhost_dump_proto_id(struct tcm_vhost_tport *tport) return "Unknown"; } -static int tcm_vhost_port_link( - struct se_portal_group *se_tpg, +static int tcm_vhost_port_link(struct se_portal_group *se_tpg, struct se_lun *lun) { struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, struct tcm_vhost_tpg, se_tpg); - atomic_inc(&tv_tpg->tv_tpg_port_count); - smp_mb__after_atomic_inc(); + mutex_lock(&tv_tpg->tv_tpg_mutex); + tv_tpg->tv_tpg_port_count++; + mutex_unlock(&tv_tpg->tv_tpg_mutex); return 0; } -static void tcm_vhost_port_unlink( - struct se_portal_group *se_tpg, +static void tcm_vhost_port_unlink(struct se_portal_group *se_tpg, struct se_lun *se_lun) { struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, struct tcm_vhost_tpg, se_tpg); - atomic_dec(&tv_tpg->tv_tpg_port_count); - smp_mb__after_atomic_dec(); + mutex_lock(&tv_tpg->tv_tpg_mutex); + tv_tpg->tv_tpg_port_count--; + mutex_unlock(&tv_tpg->tv_tpg_mutex); } static struct se_node_acl *tcm_vhost_make_nodeacl( @@ -1122,8 +1142,7 @@ static void tcm_vhost_drop_nodeacl(struct se_node_acl *se_acl) kfree(nacl); } -static int tcm_vhost_make_nexus( - struct tcm_vhost_tpg *tv_tpg, +static int tcm_vhost_make_nexus(struct tcm_vhost_tpg *tv_tpg, const char *name) { struct se_portal_group *se_tpg; @@ -1168,7 +1187,7 @@ static int tcm_vhost_make_nexus( return -ENOMEM; } /* - * Now register the TCM vHost virtual I_T Nexus as active with the + * Now register the TCM vhost virtual I_T Nexus as active with the * call to __transport_register_session() */ __transport_register_session(se_tpg, tv_nexus->tvn_se_sess->se_node_acl, @@ -1179,8 +1198,7 @@ static int tcm_vhost_make_nexus( return 0; } -static int tcm_vhost_drop_nexus( - struct tcm_vhost_tpg *tpg) +static int tcm_vhost_drop_nexus(struct tcm_vhost_tpg *tpg) { struct se_session *se_sess; struct tcm_vhost_nexus *tv_nexus; @@ -1198,27 +1216,27 @@ static int tcm_vhost_drop_nexus( return -ENODEV; } - if (atomic_read(&tpg->tv_tpg_port_count)) { + if (tpg->tv_tpg_port_count != 0) { mutex_unlock(&tpg->tv_tpg_mutex); - pr_err("Unable to remove TCM_vHost I_T Nexus with" + pr_err("Unable to remove TCM_vhost I_T Nexus with" " active TPG port count: %d\n", - atomic_read(&tpg->tv_tpg_port_count)); - return -EPERM; + tpg->tv_tpg_port_count); + return -EBUSY; } - if (atomic_read(&tpg->tv_tpg_vhost_count)) { + if (tpg->tv_tpg_vhost_count != 0) { mutex_unlock(&tpg->tv_tpg_mutex); - pr_err("Unable to remove TCM_vHost I_T Nexus with" + pr_err("Unable to remove TCM_vhost I_T Nexus with" " active TPG vhost count: %d\n", - atomic_read(&tpg->tv_tpg_vhost_count)); - return -EPERM; + tpg->tv_tpg_vhost_count); + return -EBUSY; } - pr_debug("TCM_vHost_ConfigFS: Removing I_T Nexus to emulated" + pr_debug("TCM_vhost_ConfigFS: Removing I_T Nexus to emulated" " %s Initiator Port: %s\n", tcm_vhost_dump_proto_id(tpg->tport), tv_nexus->tvn_se_sess->se_node_acl->initiatorname); /* - * Release the SCSI I_T Nexus to the emulated vHost Target Port + * Release the SCSI I_T Nexus to the emulated vhost Target Port */ transport_deregister_session(tv_nexus->tvn_se_sess); tpg->tpg_nexus = NULL; @@ -1228,8 +1246,7 @@ static int tcm_vhost_drop_nexus( return 0; } -static ssize_t tcm_vhost_tpg_show_nexus( - struct se_portal_group *se_tpg, +static ssize_t tcm_vhost_tpg_show_nexus(struct se_portal_group *se_tpg, char *page) { struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, @@ -1250,8 +1267,7 @@ static ssize_t tcm_vhost_tpg_show_nexus( return ret; } -static ssize_t tcm_vhost_tpg_store_nexus( - struct se_portal_group *se_tpg, +static ssize_t tcm_vhost_tpg_store_nexus(struct se_portal_group *se_tpg, const char *page, size_t count) { @@ -1336,8 +1352,7 @@ static struct configfs_attribute *tcm_vhost_tpg_attrs[] = { NULL, }; -static struct se_portal_group *tcm_vhost_make_tpg( - struct se_wwn *wwn, +static struct se_portal_group *tcm_vhost_make_tpg(struct se_wwn *wwn, struct config_group *group, const char *name) { @@ -1385,7 +1400,7 @@ static void tcm_vhost_drop_tpg(struct se_portal_group *se_tpg) list_del(&tpg->tv_tpg_list); mutex_unlock(&tcm_vhost_mutex); /* - * Release the virtual I_T Nexus for this vHost TPG + * Release the virtual I_T Nexus for this vhost TPG */ tcm_vhost_drop_nexus(tpg); /* @@ -1395,8 +1410,7 @@ static void tcm_vhost_drop_tpg(struct se_portal_group *se_tpg) kfree(tpg); } -static struct se_wwn *tcm_vhost_make_tport( - struct target_fabric_configfs *tf, +static struct se_wwn *tcm_vhost_make_tport(struct target_fabric_configfs *tf, struct config_group *group, const char *name) { @@ -1592,7 +1606,10 @@ static void tcm_vhost_deregister_configfs(void) static int __init tcm_vhost_init(void) { int ret = -ENOMEM; - + /* + * Use our own dedicated workqueue for submitting I/O into + * target core to avoid contention within system_wq. + */ tcm_vhost_workqueue = alloc_workqueue("tcm_vhost", 0, 0); if (!tcm_vhost_workqueue) goto out; diff --git a/drivers/vhost/tcm_vhost.h b/drivers/vhost/tcm_vhost.h index c983ed21e41..eff42df14de 100644 --- a/drivers/vhost/tcm_vhost.h +++ b/drivers/vhost/tcm_vhost.h @@ -47,9 +47,9 @@ struct tcm_vhost_tpg { /* Vhost port target portal group tag for TCM */ u16 tport_tpgt; /* Used to track number of TPG Port/Lun Links wrt to explict I_T Nexus shutdown */ - atomic_t tv_tpg_port_count; - /* Used for vhost_scsi device reference to tpg_nexus */ - atomic_t tv_tpg_vhost_count; + int tv_tpg_port_count; + /* Used for vhost_scsi device reference to tpg_nexus, protected by tv_tpg_mutex */ + int tv_tpg_vhost_count; /* list for tcm_vhost_list */ struct list_head tv_tpg_list; /* Used to protect access for tpg_nexus */ @@ -98,4 +98,5 @@ struct vhost_scsi_target { /* VHOST_SCSI specific defines */ #define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) #define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) -#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, struct vhost_scsi_target) +/* Changing this breaks userspace. */ +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) -- cgit v1.2.3-70-g09d2 From 1fa8f4504130adc34a071a29170f570102136835 Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Wed, 1 Aug 2012 14:51:53 -0700 Subject: tcm_fc: Avoid debug overhead when not debugging Stop doing a pile of work related to debugging messages when the ft_debug_logging flag is not set. Use unlikely to add the check in a way that the check can be inlined without inlining the whole thing. Signed-off-by: Mark Rustad Signed-off-by: Nicholas Bellinger --- drivers/target/tcm_fc/tcm_fc.h | 1 + drivers/target/tcm_fc/tfc_cmd.c | 8 +++++++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h index c5eb3c33c3d..eea69358ced 100644 --- a/drivers/target/tcm_fc/tcm_fc.h +++ b/drivers/target/tcm_fc/tcm_fc.h @@ -131,6 +131,7 @@ extern struct list_head ft_lport_list; extern struct mutex ft_lport_lock; extern struct fc4_prov ft_prov; extern struct target_fabric_configfs *ft_configfs; +extern unsigned int ft_debug_logging; /* * Fabric methods. diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index b9cb5006177..823e6922249 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -48,7 +48,7 @@ /* * Dump cmd state for debugging. */ -void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) +static void _ft_dump_cmd(struct ft_cmd *cmd, const char *caller) { struct fc_exch *ep; struct fc_seq *sp; @@ -80,6 +80,12 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) } } +void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) +{ + if (unlikely(ft_debug_logging)) + _ft_dump_cmd(cmd, caller); +} + static void ft_free_cmd(struct ft_cmd *cmd) { struct fc_frame *fp; -- cgit v1.2.3-70-g09d2 From d0e27c88d795fb9647153063ec48051fd84e1731 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Tue, 14 Aug 2012 16:06:43 -0700 Subject: target: fix NULL pointer dereference bug alloc_page() fails to get memory I am hitting this bug when the target is low in memory that fails the alloc_page() for the newly submitted command. This is a sort of off-by-one bug causing NULL pointer dereference in __free_page() since 'i' here is really the counter of total pages that have been successfully allocated here. Signed-off-by: Yi Zou Cc: Andy Grover Cc: Nicholas Bellinger Cc: Open-FCoE.org Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 0eaae23d12b..a7589ccdb6f 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2294,9 +2294,9 @@ transport_generic_get_mem(struct se_cmd *cmd) return 0; out: - while (i >= 0) { - __free_page(sg_page(&cmd->t_data_sg[i])); + while (i > 0) { i--; + __free_page(sg_page(&cmd->t_data_sg[i])); } kfree(cmd->t_data_sg); cmd->t_data_sg = NULL; -- cgit v1.2.3-70-g09d2 From 5b7517f81449067caf3d402e4abc6cd92096fe62 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 16 Aug 2012 18:56:34 -0700 Subject: tcm_vhost: Change vhost_scsi_target->vhost_wwpn to char * This patch changes the vhost_scsi_target->vhost_wwpn[] type used by VHOST_SCSI_* ioctls to 'char *' as requested by Blue Swirl in order to match the latest QEMU vhost-scsi RFC-v3 userspace code. Queuing this up into target-pending/master for a -rc3 PULL. Reported-by: Blue Swirl Cc: Michael S. Tsirkin Cc: Stefan Hajnoczi Cc: Paolo Bonzini Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vhost/tcm_vhost.h b/drivers/vhost/tcm_vhost.h index eff42df14de..e9d5c020fb3 100644 --- a/drivers/vhost/tcm_vhost.h +++ b/drivers/vhost/tcm_vhost.h @@ -91,7 +91,7 @@ struct tcm_vhost_tport { struct vhost_scsi_target { int abi_version; - unsigned char vhost_wwpn[TRANSPORT_IQN_LEN]; + char vhost_wwpn[TRANSPORT_IQN_LEN]; unsigned short vhost_tpgt; }; -- cgit v1.2.3-70-g09d2 From 16339464c5d67d0536837fc5342c9c2432b80ae0 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 15 Aug 2012 12:00:16 +0200 Subject: ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path The ldb_di[01]_podf is implemented as a clk-divider that divides by 1 or 2. In reality, the ldb_di[01]_ipu_div dividers divide by either 3.5 or 7. Adding a fixed factor of 1/3.5 fixes their children's clock rates. This should probably be converted to rate table based dividers, once available. Cc: Signed-off-by: Philipp Zabel Signed-off-by: Steffen Trumtrar Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520b6e2..4233d9e3531 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,7 +152,7 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; @@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); -- cgit v1.2.3-70-g09d2 From 1d2a2cd95ee0137a2353d1b5635739c281f27cd4 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 8 Aug 2012 00:14:13 +0000 Subject: target/pscsi: Fix bug with REPORT_LUNs handling for SCSI passthrough This patch fixes a regression bug in pscsi_transport_complete() callback code where *pt was being NULL dereferenced during REPORT_LUNS handling, that was introduced with the spc/sbc refactoring in: commit 1fd032ee10d2816c947f5d5b9abda95e728f0a8f Author: Christoph Hellwig Date: Sun May 20 11:59:15 2012 -0400 target: move code for CDB emulation As this is a special case for pscsi_parse_cdb() to call spc_parse_cdb() to allow TCM to handle REPORT_LUN emulation, pscsi_plugin_task will have not been allocated.. So now in pscsi_transport_complete() just check for existence of *pt and return for this special case. Reported-by: Alex Elsayed Cc: Alex Elsayed Cc: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pscsi.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 6e32ff6f2fa..5552fa7426b 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -673,8 +673,15 @@ static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg) struct scsi_device *sd = pdv->pdv_sd; int result; struct pscsi_plugin_task *pt = cmd->priv; - unsigned char *cdb = &pt->pscsi_cdb[0]; + unsigned char *cdb; + /* + * Special case for REPORT_LUNs handling where pscsi_plugin_task has + * not been allocated because TCM is handling the emulation directly. + */ + if (!pt) + return 0; + cdb = &pt->pscsi_cdb[0]; result = pt->pscsi_result; /* * Hack to make sure that Write-Protect modepage is set if R/O mode is -- cgit v1.2.3-70-g09d2 From 38ab8a2009e33ded06bf80d3a95da393d8d651d6 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Wed, 15 Aug 2012 12:32:36 +0300 Subject: drm/i915: fix EDID memory leak in SDVO The EDID returned by drm_get_edid() was never freed. Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index d172e987313..d81bb0bf288 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1692,6 +1692,7 @@ static bool intel_sdvo_detect_hdmi_audio(struct drm_connector *connector) edid = intel_sdvo_get_edid(connector); if (edid != NULL && edid->input & DRM_EDID_INPUT_DIGITAL) has_audio = drm_detect_monitor_audio(edid); + kfree(edid); return has_audio; } -- cgit v1.2.3-70-g09d2 From b6c7488df68ae3660d81b149b61b55b97929da83 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Tue, 14 Aug 2012 14:35:14 -0700 Subject: drm/i915/contexts: fix list corruption After reset we unconditionally reinitialize lists. If the context switch hasn't yet completed before the suspend, the default context object will end up on lists that are going to go away when we resume. The patch forces the context switch to be synchronous before suspend assuring that the active/inactive tracking is correct at the time of resume. References: https://bugs.freedesktop.org/show_bug.cgi?id=52429 Tested-by: Guang A Yang Signed-off-by: Ben Widawsky Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 5c4657a54f9..489e2b162b2 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2365,6 +2365,10 @@ int i915_gpu_idle(struct drm_device *dev) /* Flush everything onto the inactive list. */ for_each_ring(ring, dev_priv, i) { + ret = i915_switch_context(ring, NULL, DEFAULT_CONTEXT_ID); + if (ret) + return ret; + ret = i915_ring_idle(ring); if (ret) return ret; @@ -2372,10 +2376,6 @@ int i915_gpu_idle(struct drm_device *dev) /* Is the device fubar? */ if (WARN_ON(!list_empty(&ring->gpu_write_list))) return -EBUSY; - - ret = i915_switch_context(ring, NULL, DEFAULT_CONTEXT_ID); - if (ret) - return ret; } return 0; -- cgit v1.2.3-70-g09d2 From a843af186c3157cee58f1cf689385ab906e1f109 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 14 Aug 2012 11:42:14 -0300 Subject: drm/i915: fix hsw uncached pte They've changed it ... for no apparent reason. Meh. V2: remove unused 'is_hsw' field. Signed-off-by: Daniel Vetter Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/char/agp/intel-agp.h | 1 + drivers/char/agp/intel-gtt.c | 105 +++++++++++++++++++++++------------- drivers/gpu/drm/i915/i915_gem_gtt.c | 5 +- drivers/gpu/drm/i915/i915_reg.h | 1 + 4 files changed, 75 insertions(+), 37 deletions(-) diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index 6f007b6c240..6ec0fff79bc 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -64,6 +64,7 @@ #define I830_PTE_SYSTEM_CACHED 0x00000006 /* GT PTE cache control fields */ #define GEN6_PTE_UNCACHED 0x00000002 +#define HSW_PTE_UNCACHED 0x00000000 #define GEN6_PTE_LLC 0x00000004 #define GEN6_PTE_LLC_MLC 0x00000006 #define GEN6_PTE_GFDT 0x00000008 diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 08fc5cbb13c..58e32f7c322 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1156,6 +1156,30 @@ static bool gen6_check_flags(unsigned int flags) return true; } +static void haswell_write_entry(dma_addr_t addr, unsigned int entry, + unsigned int flags) +{ + unsigned int type_mask = flags & ~AGP_USER_CACHED_MEMORY_GFDT; + unsigned int gfdt = flags & AGP_USER_CACHED_MEMORY_GFDT; + u32 pte_flags; + + if (type_mask == AGP_USER_MEMORY) + pte_flags = HSW_PTE_UNCACHED | I810_PTE_VALID; + else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) { + pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID; + if (gfdt) + pte_flags |= GEN6_PTE_GFDT; + } else { /* set 'normal'/'cached' to LLC by default */ + pte_flags = GEN6_PTE_LLC | I810_PTE_VALID; + if (gfdt) + pte_flags |= GEN6_PTE_GFDT; + } + + /* gen6 has bit11-4 for physical addr bit39-32 */ + addr |= (addr >> 28) & 0xff0; + writel(addr | pte_flags, intel_private.gtt + entry); +} + static void gen6_write_entry(dma_addr_t addr, unsigned int entry, unsigned int flags) { @@ -1382,6 +1406,15 @@ static const struct intel_gtt_driver sandybridge_gtt_driver = { .check_flags = gen6_check_flags, .chipset_flush = i9xx_chipset_flush, }; +static const struct intel_gtt_driver haswell_gtt_driver = { + .gen = 6, + .setup = i9xx_setup, + .cleanup = gen6_cleanup, + .write_entry = haswell_write_entry, + .dma_mask_size = 40, + .check_flags = gen6_check_flags, + .chipset_flush = i9xx_chipset_flush, +}; static const struct intel_gtt_driver valleyview_gtt_driver = { .gen = 7, .setup = i9xx_setup, @@ -1499,77 +1532,77 @@ static const struct intel_gtt_driver_description { { PCI_DEVICE_ID_INTEL_VALLEYVIEW_IG, "ValleyView", &valleyview_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_D_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_M_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_S_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { 0, NULL, NULL } }; diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index ee9b68f6bc3..d9a5372ec56 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -261,7 +261,10 @@ void i915_ppgtt_bind_object(struct i915_hw_ppgtt *ppgtt, pte_flags |= GEN6_PTE_CACHE_LLC; break; case I915_CACHE_NONE: - pte_flags |= GEN6_PTE_UNCACHED; + if (IS_HASWELL(dev)) + pte_flags |= HSW_PTE_UNCACHED; + else + pte_flags |= GEN6_PTE_UNCACHED; break; default: BUG(); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index acc99b21e0b..28725ce5b82 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -115,6 +115,7 @@ #define GEN6_PTE_VALID (1 << 0) #define GEN6_PTE_UNCACHED (1 << 1) +#define HSW_PTE_UNCACHED (0) #define GEN6_PTE_CACHE_LLC (2 << 1) #define GEN6_PTE_CACHE_LLC_MLC (3 << 1) #define GEN6_PTE_CACHE_BITS (3 << 1) -- cgit v1.2.3-70-g09d2 From 4eab81366465aedcfd26de960c595bc03599c09f Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 13 Aug 2012 13:22:34 +0300 Subject: drm/i915: extract connector update from intel_ddc_get_modes() for reuse Refactor the connector update part of intel_ddc_get_modes() into a separate intel_connector_update_modes() function for reuse. No functional changes. Signed-off-by: Jani Nikula Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45881 Tested-by: Alex Ferrando Cc: stable@vger.kernel.org (for 3.4+3.5) Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_drv.h | 2 ++ drivers/gpu/drm/i915/intel_modes.c | 31 ++++++++++++++++++++++--------- 2 files changed, 24 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 132ab511b90..cd54cf88a28 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -342,6 +342,8 @@ struct intel_fbc_work { int interval; }; +int intel_connector_update_modes(struct drm_connector *connector, + struct edid *edid); int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter); extern void intel_attach_force_audio_property(struct drm_connector *connector); diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index 45848b9b670..29b72593fbb 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -32,6 +32,25 @@ #include "intel_drv.h" #include "i915_drv.h" +/** + * intel_connector_update_modes - update connector from edid + * @connector: DRM connector device to use + * @edid: previously read EDID information + */ +int intel_connector_update_modes(struct drm_connector *connector, + struct edid *edid) +{ + int ret; + + drm_mode_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + drm_edid_to_eld(connector, edid); + connector->display_info.raw_edid = NULL; + kfree(edid); + + return ret; +} + /** * intel_ddc_get_modes - get modelist from monitor * @connector: DRM connector device to use @@ -43,18 +62,12 @@ int intel_ddc_get_modes(struct drm_connector *connector, struct i2c_adapter *adapter) { struct edid *edid; - int ret = 0; edid = drm_get_edid(connector, adapter); - if (edid) { - drm_mode_connector_update_edid_property(connector, edid); - ret = drm_add_edid_modes(connector, edid); - drm_edid_to_eld(connector, edid); - connector->display_info.raw_edid = NULL; - kfree(edid); - } + if (!edid) + return 0; - return ret; + return intel_connector_update_modes(connector, edid); } static const struct drm_prop_enum_list force_audio_names[] = { -- cgit v1.2.3-70-g09d2 From f1a2f5b7c5f0941d23eef0a095c0b99bf8d051e6 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 13 Aug 2012 13:22:35 +0300 Subject: drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads GMBUS was enabled over bit-banging as the default in commits: commit c3dfefa0a6d235bd465309e12f4c56ea16e71111 Author: Daniel Vetter Date: Tue Feb 14 22:37:25 2012 +0100 drm/i915: reenable gmbus on gen3+ again and commit 0fb3f969c8683505fb7323c06bf8a999a5a45a15 Author: Daniel Vetter Date: Fri Mar 2 19:38:30 2012 +0100 drm/i915: enable gmbus on gen2 Unfortunately, GMBUS seems to fail on some CRT displays. Add a bit-banging fallback to CRT EDID reads. LKML-Reference: <201207251020.47637.maciej.rutecki@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45881 Signed-off-by: Jani Nikula Tested-by: Alex Ferrando Cc: stable@vger.kernel.org (for 3.4+3.5) Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 7ed4a41c396..23bdc8cd145 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -326,6 +326,36 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector) return ret; } +static struct edid *intel_crt_get_edid(struct drm_connector *connector, + struct i2c_adapter *i2c) +{ + struct edid *edid; + + edid = drm_get_edid(connector, i2c); + + if (!edid && !intel_gmbus_is_forced_bit(i2c)) { + DRM_DEBUG_KMS("CRT GMBUS EDID read failed, retry using GPIO bit-banging\n"); + intel_gmbus_force_bit(i2c, true); + edid = drm_get_edid(connector, i2c); + intel_gmbus_force_bit(i2c, false); + } + + return edid; +} + +/* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */ +static int intel_crt_ddc_get_modes(struct drm_connector *connector, + struct i2c_adapter *adapter) +{ + struct edid *edid; + + edid = intel_crt_get_edid(connector, adapter); + if (!edid) + return 0; + + return intel_connector_update_modes(connector, edid); +} + static bool intel_crt_detect_ddc(struct drm_connector *connector) { struct intel_crt *crt = intel_attached_crt(connector); @@ -336,7 +366,7 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector) BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG); i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin); - edid = drm_get_edid(connector, i2c); + edid = intel_crt_get_edid(connector, i2c); if (edid) { bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL; @@ -544,13 +574,13 @@ static int intel_crt_get_modes(struct drm_connector *connector) struct i2c_adapter *i2c; i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin); - ret = intel_ddc_get_modes(connector, i2c); + ret = intel_crt_ddc_get_modes(connector, i2c); if (ret || !IS_G4X(dev)) return ret; /* Try to probe digital port for output in DVI-I -> VGA mode. */ i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB); - return intel_ddc_get_modes(connector, i2c); + return intel_crt_ddc_get_modes(connector, i2c); } static int intel_crt_set_property(struct drm_connector *connector, -- cgit v1.2.3-70-g09d2 From 87161ccdc61862c8b49e75c21209d7f79dc758e9 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 10 Aug 2012 16:00:31 -0700 Subject: MIPS: Octeon: Fix broken interrupt controller code. Since 3.6.0-rc1, We are getting many messages like: WARNING: at kernel/irq/irqdomain.c:444 irq_domain_associate_many+0x23c/0x260() Modules linked in: Call Trace: [] dump_stack+0x8/0x34 [] warn_slowpath_common+0x78/0xa8 [] irq_domain_associate_many+0x23c/0x260 [] irq_create_mapping+0xd0/0x220 [] irq_create_of_mapping+0x7c/0x158 [] irq_of_parse_and_map+0x28/0x40 . . . Both the CIU and GPIO interrupt domains were somewhat screwed up. For the CIU domain, we need to call irq_domain_associate() for each of the preassigned irq numbers. For the GPIO domain, we were applying the register bit offset in octeon_irq_gpio_xlat, but it should be done in octeon_irq_gpio_map instead. Also: Reserve all 8 'core' irqs for the 'core' irq_chip so that they don't get used by the other domains. Remove unused OCTEON_IRQ_* symbols. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4190/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/octeon-irq.c | 89 +++++++++++++------------- arch/mips/include/asm/mach-cavium-octeon/irq.h | 10 +-- 2 files changed, 44 insertions(+), 55 deletions(-) diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 7fb1f222b8a..274cd4fad30 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -61,6 +61,12 @@ static void octeon_irq_set_ciu_mapping(int irq, int line, int bit, octeon_irq_ciu_to_irq[line][bit] = irq; } +static void octeon_irq_force_ciu_mapping(struct irq_domain *domain, + int irq, int line, int bit) +{ + irq_domain_associate(domain, irq, line << 6 | bit); +} + static int octeon_coreid_for_cpu(int cpu) { #ifdef CONFIG_SMP @@ -183,19 +189,9 @@ static void __init octeon_irq_init_core(void) mutex_init(&cd->core_irq_mutex); irq = OCTEON_IRQ_SW0 + i; - switch (irq) { - case OCTEON_IRQ_TIMER: - case OCTEON_IRQ_SW0: - case OCTEON_IRQ_SW1: - case OCTEON_IRQ_5: - case OCTEON_IRQ_PERF: - irq_set_chip_data(irq, cd); - irq_set_chip_and_handler(irq, &octeon_irq_chip_core, - handle_percpu_irq); - break; - default: - break; - } + irq_set_chip_data(irq, cd); + irq_set_chip_and_handler(irq, &octeon_irq_chip_core, + handle_percpu_irq); } } @@ -890,7 +886,6 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, unsigned int type; unsigned int pin; unsigned int trigger; - struct octeon_irq_gpio_domain_data *gpiod; if (d->of_node != node) return -EINVAL; @@ -925,8 +920,7 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, break; } *out_type = type; - gpiod = d->host_data; - *out_hwirq = gpiod->base_hwirq + pin; + *out_hwirq = pin; return 0; } @@ -996,19 +990,21 @@ static int octeon_irq_ciu_map(struct irq_domain *d, static int octeon_irq_gpio_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw) { - unsigned int line = hw >> 6; - unsigned int bit = hw & 63; + struct octeon_irq_gpio_domain_data *gpiod = d->host_data; + unsigned int line, bit; if (!octeon_irq_virq_in_range(virq)) return -EINVAL; + hw += gpiod->base_hwirq; + line = hw >> 6; + bit = hw & 63; if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0) return -EINVAL; octeon_irq_set_ciu_mapping(virq, line, bit, octeon_irq_gpio_chip, octeon_irq_handle_gpio); - return 0; } @@ -1149,6 +1145,7 @@ static void __init octeon_irq_init_ciu(void) struct irq_chip *chip_wd; struct device_node *gpio_node; struct device_node *ciu_node; + struct irq_domain *ciu_domain = NULL; octeon_irq_init_ciu_percpu(); octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu; @@ -1177,31 +1174,6 @@ static void __init octeon_irq_init_ciu(void) /* Mips internal */ octeon_irq_init_core(); - /* CIU_0 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WORKQ0, 0, i + 0, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); - - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_MSI0, 0, i + 40, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_RML, 0, 46, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip, handle_edge_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB0, 0, 56, chip, handle_level_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_BOOTDMA, 0, 63, chip, handle_level_irq); - - /* CIU_1 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq); - gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio"); if (gpio_node) { struct octeon_irq_gpio_domain_data *gpiod; @@ -1219,10 +1191,35 @@ static void __init octeon_irq_init_ciu(void) ciu_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-ciu"); if (ciu_node) { - irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); + ciu_domain = irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); of_node_put(ciu_node); } else - pr_warn("Cannot find device node for cavium,octeon-3860-ciu.\n"); + panic("Cannot find device node for cavium,octeon-3860-ciu."); + + /* CIU_0 */ + for (i = 0; i < 16; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_WORKQ0, 0, i + 0); + + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); + + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_INT0, 0, i + 36); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56); + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_BOOTDMA, 0, 63); + + /* CIU_1 */ + for (i = 0; i < 16; i++) + octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB1, 1, 17); /* Enable the CIU lines */ set_c0_status(STATUSF_IP3 | STATUSF_IP2); diff --git a/arch/mips/include/asm/mach-cavium-octeon/irq.h b/arch/mips/include/asm/mach-cavium-octeon/irq.h index 418992042f6..c22a3078bf1 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/irq.h +++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h @@ -21,14 +21,10 @@ enum octeon_irq { OCTEON_IRQ_TIMER, /* sources in CIU_INTX_EN0 */ OCTEON_IRQ_WORKQ0, - OCTEON_IRQ_GPIO0 = OCTEON_IRQ_WORKQ0 + 16, - OCTEON_IRQ_WDOG0 = OCTEON_IRQ_GPIO0 + 16, + OCTEON_IRQ_WDOG0 = OCTEON_IRQ_WORKQ0 + 16, OCTEON_IRQ_WDOG15 = OCTEON_IRQ_WDOG0 + 15, OCTEON_IRQ_MBOX0 = OCTEON_IRQ_WDOG0 + 16, OCTEON_IRQ_MBOX1, - OCTEON_IRQ_UART0, - OCTEON_IRQ_UART1, - OCTEON_IRQ_UART2, OCTEON_IRQ_PCI_INT0, OCTEON_IRQ_PCI_INT1, OCTEON_IRQ_PCI_INT2, @@ -38,8 +34,6 @@ enum octeon_irq { OCTEON_IRQ_PCI_MSI2, OCTEON_IRQ_PCI_MSI3, - OCTEON_IRQ_TWSI, - OCTEON_IRQ_TWSI2, OCTEON_IRQ_RML, OCTEON_IRQ_TIMER0, OCTEON_IRQ_TIMER1, @@ -47,8 +41,6 @@ enum octeon_irq { OCTEON_IRQ_TIMER3, OCTEON_IRQ_USB0, OCTEON_IRQ_USB1, - OCTEON_IRQ_MII0, - OCTEON_IRQ_MII1, OCTEON_IRQ_BOOTDMA, #ifndef CONFIG_PCI_MSI OCTEON_IRQ_LAST = 127 -- cgit v1.2.3-70-g09d2 From b4da14abf27227fc767ec257f44de70085a0bc68 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 4 Aug 2012 18:01:24 +0200 Subject: MIPS: ath79: Fix number of GPIO lines for AR724[12] The AR724[12] SoCs have more GPIO lines than the AR7240. Signed-off-by: Gabor Juhos Cc: Cc: linux-mips@linux-mips.org Patchwork: https://http://patchwork.linux-mips.org/patch/4167/ Signed-off-by: Ralf Baechle --- arch/mips/ath79/gpio.c | 6 ++++-- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c index 29054f21183..48fe762d252 100644 --- a/arch/mips/ath79/gpio.c +++ b/arch/mips/ath79/gpio.c @@ -188,8 +188,10 @@ void __init ath79_gpio_init(void) if (soc_is_ar71xx()) ath79_gpio_count = AR71XX_GPIO_COUNT; - else if (soc_is_ar724x()) - ath79_gpio_count = AR724X_GPIO_COUNT; + else if (soc_is_ar7240()) + ath79_gpio_count = AR7240_GPIO_COUNT; + else if (soc_is_ar7241() || soc_is_ar7242()) + ath79_gpio_count = AR7241_GPIO_COUNT; else if (soc_is_ar913x()) ath79_gpio_count = AR913X_GPIO_COUNT; else if (soc_is_ar933x()) diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h index 1caa78ad06d..dde504477fa 100644 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h @@ -393,7 +393,8 @@ #define AR71XX_GPIO_REG_FUNC 0x28 #define AR71XX_GPIO_COUNT 16 -#define AR724X_GPIO_COUNT 18 +#define AR7240_GPIO_COUNT 18 +#define AR7241_GPIO_COUNT 20 #define AR913X_GPIO_COUNT 22 #define AR933X_GPIO_COUNT 30 #define AR934X_GPIO_COUNT 23 -- cgit v1.2.3-70-g09d2 From 5fb234560eb3033b35812cd0d80613dbf37dca2f Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 4 Aug 2012 18:01:25 +0200 Subject: MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240 The currently assigned IRQ number to the OHCI controller is incorrect for the AR7240 SoC, and that leads to the following error message from the OHCI driver: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ath79-ohci ath79-ohci: Atheros built-in OHCI controller ath79-ohci ath79-ohci: new USB bus registered, assigned bus number 1 ath79-ohci ath79-ohci: irq 14, io mem 0x1b000000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb 1-1: new full-speed USB device number 2 using ath79-ohci ath79-ohci ath79-ohci: Unlink after no-IRQ? Controller is probably using the wrong IRQ. Fix this by using the correct IRQ number. Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4168/ Signed-off-by: Ralf Baechle --- arch/mips/ath79/dev-usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c index 36e9570e7bc..b2a2311ec85 100644 --- a/arch/mips/ath79/dev-usb.c +++ b/arch/mips/ath79/dev-usb.c @@ -145,6 +145,8 @@ static void __init ar7240_usb_setup(void) ath79_ohci_resources[0].start = AR7240_OHCI_BASE; ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; + ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB; + ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB; platform_device_register(&ath79_ohci_device); } -- cgit v1.2.3-70-g09d2 From 946380676396e633878d07ecb23c9144fbb44abc Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 4 Aug 2012 18:01:26 +0200 Subject: MIPS: ath79: select HAVE_CLK It is needed in order to get rid of the following errors: arch/mips/ath79/clock.c:353:13: error: redefinition of 'clk_get' include/linux/clk.h:281:27: note: previous definition of 'clk_get' was here arch/mips/ath79/clock.c:377:5: error: redefinition of 'clk_enable' include/linux/clk.h:295:19: note: previous definition of 'clk_enable' was here arch/mips/ath79/clock.c:383:6: error: redefinition of 'clk_disable' include/linux/clk.h:300:20: note: previous definition of 'clk_disable' was here arch/mips/ath79/clock.c:388:15: error: redefinition of 'clk_get_rate' include/linux/clk.h:302:29: note: previous definition of 'clk_get_rate' was here arch/mips/ath79/clock.c:394:6: error: redefinition of 'clk_put' include/linux/clk.h:291:20: note: previous definition of 'clk_put' was here Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4170/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 331d574df99..faf65286574 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -89,6 +89,7 @@ config ATH79 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT + select HAVE_CLK select IRQ_CPU select MIPS_MACHINE select SYS_HAS_CPU_MIPS32_R2 -- cgit v1.2.3-70-g09d2 From 143ec74eb10ac9a8c4357341a03b07ac4f04a761 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 12 Jul 2012 21:54:05 +0100 Subject: MIPS: MTX-1: Add udelay to mtx1_pci_idsel Without this udelay(1) PCI idsel does not work correctly on the "singleboard" (T-Mobile Surfbox) for the MiniPCI device. The result is that PCI configuration fails and the MiniPCI card is not detected correctly. Instead of PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci 0000:00:03.0: BAR 0: assigned [mem 0x40000000-0x4000ffff] pci 0000:00:00.0: BAR 0: assigned [mem 0x40010000-0x40010fff] pci 0000:00:00.1: BAR 0: assigned [mem 0x40011000-0x40011fff] We see only the CardBus device: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x40000fff] pci 0000:00:00.1: BAR 0: assigned [mem 0x40001000-0x40001fff] Later the device driver shows this error: ath5k 0000:00:03.0: cannot remap PCI memory region ath5k: probe of 0000:00:03.0 failed with error -5 I assume that the logic chip which usually supresses the signal to the CardBus card has some settling time and without the delay it would still let the Cardbus interfere with the response from the MiniPCI card. What I cannot explain is why this behaviour shows up now and not in earlier kernel versions before. Maybe older PCI code was slower? Signed-off-by: Bruno Randolf Cc: linux-mips@linux-mips.org Cc: manuel.lauss@googlemail.com Cc: florian@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/4087/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/board-mtx1.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c index 99969484c47..a124c251c0c 100644 --- a/arch/mips/alchemy/board-mtx1.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -228,6 +228,8 @@ static int mtx1_pci_idsel(unsigned int devsel, int assert) * adapter on the mtx-1 "singleboard" variant. It triggers a custom * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. */ + udelay(1); + if (assert && devsel != 0) /* Suppress signal to Cardbus */ alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ -- cgit v1.2.3-70-g09d2 From d3cac35cd0a2a987f7559e1829fb0253cea33872 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 8 Aug 2012 14:57:03 +0200 Subject: MIPS: Fix memory leak in error path of HI16/LO16 relocation handling. Commit 6f5d2e970452b5c86906adcb8e7ad246f535ba39 (lmo) / 477c4b07406357ad93d0e32788dbf3ee814eadaa (kernel.org) [[MIPS: VPE: Free relocation chain on error.] fixed the same issue in the vpe loader in 2009 but back then the same bug in module.c went unfixed. Signed-off-by: Ralf Baechle Reported-by: Akhilesh Kumar --- arch/mips/kernel/module.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index a5066b1c3de..e5f2f56524e 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -146,16 +146,15 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) { unsigned long insnlo = *location; Elf_Addr val, vallo; + struct mips_hi16 *l, *next; /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; if (mips_hi16_list != NULL) { - struct mips_hi16 *l; l = mips_hi16_list; while (l != NULL) { - struct mips_hi16 *next; unsigned long insn; /* @@ -201,6 +200,12 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) return 0; out_danger: + while (l) { + next = l->next; + kfree(l); + l = next; + } + pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name); return -ENOEXEC; -- cgit v1.2.3-70-g09d2 From 861667dc82f561e65336ea67f73021b782b4ff74 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 8 Aug 2012 16:59:43 +0200 Subject: MIPS: Fix race condition in module relocation code. The relocation code was essentially taken from the 2.4 modutils which perform relocation in userspace. In 2.6 relocation of multiple modules may be performed in parallel by the in-kernel loader so the global variable mips_hi16_list won't fly anymore. Fix race by moving it into mod_arch_specific. [ralf@linux-mips.org: folded in Tony's followup fix. Thanks Tony!] Signed-off-by: Ralf Baechle Signed-off-by: Tony Wu Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/4189/ --- arch/mips/include/asm/module.h | 1 + arch/mips/kernel/module.c | 13 ++++++------- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index 7531ecd654d..dca8bce8c7a 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -10,6 +10,7 @@ struct mod_arch_specific { struct list_head dbe_list; const struct exception_table_entry *dbe_start; const struct exception_table_entry *dbe_end; + struct mips_hi16 *r_mips_hi16_list; }; typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index e5f2f56524e..8e1fb802c3e 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -39,8 +39,6 @@ struct mips_hi16 { Elf_Addr value; }; -static struct mips_hi16 *mips_hi16_list; - static LIST_HEAD(dbe_list); static DEFINE_SPINLOCK(dbe_lock); @@ -128,8 +126,8 @@ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v) n->addr = (Elf_Addr *)location; n->value = v; - n->next = mips_hi16_list; - mips_hi16_list = n; + n->next = me->arch.r_mips_hi16_list; + me->arch.r_mips_hi16_list = n; return 0; } @@ -151,9 +149,9 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; - if (mips_hi16_list != NULL) { + if (me->arch.r_mips_hi16_list != NULL) { - l = mips_hi16_list; + l = me->arch.r_mips_hi16_list; while (l != NULL) { unsigned long insn; @@ -187,7 +185,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) l = next; } - mips_hi16_list = NULL; + me->arch.r_mips_hi16_list = NULL; } /* @@ -278,6 +276,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, pr_debug("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); + me->arch.r_mips_hi16_list = NULL; for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { /* This is where to make the change */ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr -- cgit v1.2.3-70-g09d2 From c54de490a2e4e74164f747925ff05c00dfa153cd Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 14 Aug 2012 00:34:18 +0200 Subject: MIPS: Module: Deal with malformed HI16/LO16 relocation sequences. In case a series of R_MIPS_HI16 relocations was not followed by an R_MIPS_LO16 relocation we were leaking the hi16 relocation chain. Handle that error and return an error. Signed-off-by: Ralf Baechle --- arch/mips/kernel/module.c | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index 8e1fb802c3e..4f8c3cba8c0 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -140,19 +140,30 @@ static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v) return 0; } +static void free_relocation_chain(struct mips_hi16 *l) +{ + struct mips_hi16 *next; + + while (l) { + next = l->next; + kfree(l); + l = next; + } +} + static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) { unsigned long insnlo = *location; + struct mips_hi16 *l; Elf_Addr val, vallo; - struct mips_hi16 *l, *next; /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; if (me->arch.r_mips_hi16_list != NULL) { - l = me->arch.r_mips_hi16_list; while (l != NULL) { + struct mips_hi16 *next; unsigned long insn; /* @@ -198,11 +209,8 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) return 0; out_danger: - while (l) { - next = l->next; - kfree(l); - l = next; - } + free_relocation_chain(l); + me->arch.r_mips_hi16_list = NULL; pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name); @@ -300,6 +308,19 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, return res; } + /* + * Normally the hi16 list should be deallocated at this point. A + * malformed binary however could contain a series of R_MIPS_HI16 + * relocations not followed by a R_MIPS_LO16 relocation. In that + * case, free up the list and return an error. + */ + if (me->arch.r_mips_hi16_list) { + free_relocation_chain(me->arch.r_mips_hi16_list); + me->arch.r_mips_hi16_list = NULL; + + return -ENOEXEC; + } + return 0; } -- cgit v1.2.3-70-g09d2 From 5a6704454a68ab6e27e4fc5b82818a8c5733bf29 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 18 Jun 2012 12:07:51 +0200 Subject: MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348. BCM6338 and BCM6348 have a message control register width of 8 bits, instead of 16-bits like what the SPI driver assumes right now. Also the SPI message type shift value of 14 is actually 6 for these SoCs. This resulted in transmit FIFO corruption because we were writing 16-bits to an 8-bits wide register, thus spanning on the first byte of the transmit FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo(). Fix this by passing the message control register width and message type shift through platform data back to the SPI driver so that it can use it properly. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Cc: jonas.gorski@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/3983/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/dev-spi.c | 4 +++ .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h | 2 ++ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 13 ++++++--- drivers/spi/spi-bcm63xx.c | 31 ++++++++++++++++++---- 4 files changed, 42 insertions(+), 8 deletions(-) diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c index e39f73048d4..f1c9c3e2f67 100644 --- a/arch/mips/bcm63xx/dev-spi.c +++ b/arch/mips/bcm63xx/dev-spi.c @@ -106,11 +106,15 @@ int __init bcm63xx_spi_register(void) if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH; } if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) { spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6358_MSG_CTL_WIDTH; } bcm63xx_spi_regs_init(); diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h index 7d98dbe5d4b..c9bae136260 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h @@ -9,6 +9,8 @@ int __init bcm63xx_spi_register(void); struct bcm63xx_spi_pdata { unsigned int fifo_size; + unsigned int msg_type_shift; + unsigned int msg_ctl_width; int bus_num; int num_chipselect; u32 speed_hz; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 4ccc2a748af..61f2a2a5099 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -1054,7 +1054,8 @@ #define SPI_6338_FILL_BYTE 0x07 #define SPI_6338_MSG_TAIL 0x09 #define SPI_6338_RX_TAIL 0x0b -#define SPI_6338_MSG_CTL 0x40 +#define SPI_6338_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6338_MSG_CTL_WIDTH 8 #define SPI_6338_MSG_DATA 0x41 #define SPI_6338_MSG_DATA_SIZE 0x3f #define SPI_6338_RX_DATA 0x80 @@ -1070,7 +1071,8 @@ #define SPI_6348_FILL_BYTE 0x07 #define SPI_6348_MSG_TAIL 0x09 #define SPI_6348_RX_TAIL 0x0b -#define SPI_6348_MSG_CTL 0x40 +#define SPI_6348_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6348_MSG_CTL_WIDTH 8 #define SPI_6348_MSG_DATA 0x41 #define SPI_6348_MSG_DATA_SIZE 0x3f #define SPI_6348_RX_DATA 0x80 @@ -1078,6 +1080,7 @@ /* BCM 6358 SPI core */ #define SPI_6358_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6358_MSG_CTL_WIDTH 16 #define SPI_6358_MSG_DATA 0x02 #define SPI_6358_MSG_DATA_SIZE 0x21e #define SPI_6358_RX_DATA 0x400 @@ -1094,6 +1097,7 @@ /* BCM 6358 SPI core */ #define SPI_6368_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6368_MSG_CTL_WIDTH 16 #define SPI_6368_MSG_DATA 0x02 #define SPI_6368_MSG_DATA_SIZE 0x21e #define SPI_6368_RX_DATA 0x400 @@ -1115,7 +1119,10 @@ #define SPI_HD_W 0x01 #define SPI_HD_R 0x02 #define SPI_BYTE_CNT_SHIFT 0 -#define SPI_MSG_TYPE_SHIFT 14 +#define SPI_6338_MSG_TYPE_SHIFT 6 +#define SPI_6348_MSG_TYPE_SHIFT 6 +#define SPI_6358_MSG_TYPE_SHIFT 14 +#define SPI_6368_MSG_TYPE_SHIFT 14 /* Command */ #define SPI_CMD_NOOP 0x00 diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 6e25ef1bce9..b7d61e7b873 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -47,6 +47,8 @@ struct bcm63xx_spi { /* Platform data */ u32 speed_hz; unsigned fifo_size; + unsigned int msg_type_shift; + unsigned int msg_ctl_width; /* Data buffers */ const unsigned char *tx_ptr; @@ -221,13 +223,20 @@ static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); if (t->rx_buf && t->tx_buf) - msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); + msg_ctl |= (SPI_FD_RW << bs->msg_type_shift); else if (t->rx_buf) - msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT); + msg_ctl |= (SPI_HD_R << bs->msg_type_shift); else if (t->tx_buf) - msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT); - - bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + msg_ctl |= (SPI_HD_W << bs->msg_type_shift); + + switch (bs->msg_ctl_width) { + case 8: + bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL); + break; + case 16: + bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + break; + } /* Issue the transfer */ cmd = SPI_CMD_START_IMMEDIATE; @@ -406,9 +415,21 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->transfer_one_message = bcm63xx_spi_transfer_one; master->mode_bits = MODEBITS; bs->speed_hz = pdata->speed_hz; + bs->msg_type_shift = pdata->msg_type_shift; + bs->msg_ctl_width = pdata->msg_ctl_width; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); + switch (bs->msg_ctl_width) { + case 8: + case 16: + break; + default: + dev_err(dev, "unsupported MSG_CTL width: %d\n", + bs->msg_ctl_width); + goto out_clk_disable; + } + /* Initialize hardware */ clk_enable(bs->clk); bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); -- cgit v1.2.3-70-g09d2 From cf9bfe55f24973a8f40e2c922a7e82cf09e486fd Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Tue, 14 Aug 2012 18:56:13 +0530 Subject: MIPS: Synchronize MIPS count one CPU at a time The current implementation of synchronise_count_{master,slave} blocks slave CPUs in early boot until all of them come up. This no longer works because blocking a CPU with interrupts off after notifying the CPU to be online causes problems with the current kernel. Specifically, after the workqueue changes (commit a08489c569dc1 "Pull workqueue changes from Tejun Heo") the CPU_ONLINE notification callback workqueue_cpu_up_callback() will hang on wait_for_completion(&idle_rebind.done), if the slave CPUs are blocked for synchronize_count_slave(). The changes are to update synchronize_count_{master,slave}() to handle one CPU at a time and to call synchronise_count_master() in __cpu_up() so that the CPU_ONLINE notification goes out only after the COP0 COUNT register is synchronized. [ralf@linux-mips.org: This matter only to those few platforms which are using the cp0 counter as their clocksource which are XLP, XLR and MIPS' CMP solution.] Signed-off-by: Jayachandran C Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4216/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/r4k-timer.h | 8 ++++---- arch/mips/kernel/smp.c | 4 ++-- arch/mips/kernel/sync-r4k.c | 26 +++++++++++--------------- 3 files changed, 17 insertions(+), 21 deletions(-) diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h index a37d12b3b61..afe9e0e03fe 100644 --- a/arch/mips/include/asm/r4k-timer.h +++ b/arch/mips/include/asm/r4k-timer.h @@ -12,16 +12,16 @@ #ifdef CONFIG_SYNC_R4K -extern void synchronise_count_master(void); -extern void synchronise_count_slave(void); +extern void synchronise_count_master(int cpu); +extern void synchronise_count_slave(int cpu); #else -static inline void synchronise_count_master(void) +static inline void synchronise_count_master(int cpu) { } -static inline void synchronise_count_slave(void) +static inline void synchronise_count_slave(int cpu) { } diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 31637d8c873..9005bf9fb85 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -130,7 +130,7 @@ asmlinkage __cpuinit void start_secondary(void) cpu_set(cpu, cpu_callin_map); - synchronise_count_slave(); + synchronise_count_slave(cpu); /* * irq will be enabled in ->smp_finish(), enabling it too early @@ -173,7 +173,6 @@ void smp_send_stop(void) void __init smp_cpus_done(unsigned int max_cpus) { mp_ops->cpus_done(); - synchronise_count_master(); } /* called from main before smp_init() */ @@ -206,6 +205,7 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle) while (!cpu_isset(cpu, cpu_callin_map)) udelay(100); + synchronise_count_master(cpu); return 0; } diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 842d55e411f..7f1eca3858d 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -28,12 +28,11 @@ static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0); #define COUNTON 100 #define NR_LOOPS 5 -void __cpuinit synchronise_count_master(void) +void __cpuinit synchronise_count_master(int cpu) { int i; unsigned long flags; unsigned int initcount; - int nslaves; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -43,8 +42,7 @@ void __cpuinit synchronise_count_master(void) return; #endif - printk(KERN_INFO "Synchronize counters across %u CPUs: ", - num_online_cpus()); + printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu); local_irq_save(flags); @@ -52,7 +50,7 @@ void __cpuinit synchronise_count_master(void) * Notify the slaves that it's time to start */ atomic_set(&count_reference, read_c0_count()); - atomic_set(&count_start_flag, 1); + atomic_set(&count_start_flag, cpu); smp_wmb(); /* Count will be initialised to current timer for all CPU's */ @@ -69,10 +67,9 @@ void __cpuinit synchronise_count_master(void) * two CPUs. */ - nslaves = num_online_cpus()-1; for (i = 0; i < NR_LOOPS; i++) { - /* slaves loop on '!= ncpus' */ - while (atomic_read(&count_count_start) != nslaves) + /* slaves loop on '!= 2' */ + while (atomic_read(&count_count_start) != 1) mb(); atomic_set(&count_count_stop, 0); smp_wmb(); @@ -89,7 +86,7 @@ void __cpuinit synchronise_count_master(void) /* * Wait for all slaves to leave the synchronization point: */ - while (atomic_read(&count_count_stop) != nslaves) + while (atomic_read(&count_count_stop) != 1) mb(); atomic_set(&count_count_start, 0); smp_wmb(); @@ -97,6 +94,7 @@ void __cpuinit synchronise_count_master(void) } /* Arrange for an interrupt in a short while */ write_c0_compare(read_c0_count() + COUNTON); + atomic_set(&count_start_flag, 0); local_irq_restore(flags); @@ -108,11 +106,10 @@ void __cpuinit synchronise_count_master(void) printk("done.\n"); } -void __cpuinit synchronise_count_slave(void) +void __cpuinit synchronise_count_slave(int cpu) { int i; unsigned int initcount; - int ncpus; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -127,16 +124,15 @@ void __cpuinit synchronise_count_slave(void) * so we first wait for the master to say everyone is ready */ - while (!atomic_read(&count_start_flag)) + while (atomic_read(&count_start_flag) != cpu) mb(); /* Count will be initialised to next expire for all CPU's */ initcount = atomic_read(&count_reference); - ncpus = num_online_cpus(); for (i = 0; i < NR_LOOPS; i++) { atomic_inc(&count_count_start); - while (atomic_read(&count_count_start) != ncpus) + while (atomic_read(&count_count_start) != 2) mb(); /* @@ -146,7 +142,7 @@ void __cpuinit synchronise_count_slave(void) write_c0_count(initcount); atomic_inc(&count_count_stop); - while (atomic_read(&count_count_stop) != ncpus) + while (atomic_read(&count_count_stop) != 2) mb(); } /* Arrange for an interrupt in a short while */ -- cgit v1.2.3-70-g09d2 From 00dc5ce2a653a332190aa29b2e1f3bceaa7d5b8d Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 14 Aug 2012 21:12:21 +0200 Subject: MIPS: ath79: don't hardcode the unavailability of the DSP ASE The ath79 platform code allows to run a single kernel image on various SoCs which are based on the 24Kc and 74Kc cores. The current code explicitely disables the DSP ASE, but that is available in the 74Kc core. Remove the override in order to let the kernel to detect the availability of the DSP ASE at runtime. Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4222/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h index 4476fa03bf3..6ddae926bf7 100644 --- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h @@ -42,7 +42,6 @@ #define cpu_has_mips64r1 0 #define cpu_has_mips64r2 0 -#define cpu_has_dsp 0 #define cpu_has_mipsmt 0 #define cpu_has_64bits 0 -- cgit v1.2.3-70-g09d2 From 16cc2cf642eb73978a3ebde66dc94d24d46b4798 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 17 Aug 2012 10:45:27 +0200 Subject: MIPS: Malta: Delete duplicate PCI fixup. 2ec8663f9c03a96f2c328c7c483603c31d62ad37 (lmo) rsp. 497e5ff03f58583ada469db8a1aa34eced9dd63e (kernel.org) [MIPS: Malta: Move PIIX4 PCI fixup to where it belongs.] attempted to move this PCI fixup but really only added it at it's new location without deleting the old instance. Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-pci.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index 284dea54faf..2147cb34e70 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -252,16 +252,3 @@ void __init mips_pcibios_init(void) register_pci_controller(controller); } - -/* Enable PCI 2.1 compatibility in PIIX4 */ -static void __devinit quirk_dlcsetup(struct pci_dev *dev) -{ - u8 odlc, ndlc; - (void) pci_read_config_byte(dev, 0x82, &odlc); - /* Enable passive releases and delayed transaction */ - ndlc = odlc | 7; - (void) pci_write_config_byte(dev, 0x82, ndlc); -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, - quirk_dlcsetup); -- cgit v1.2.3-70-g09d2 From 2ee38d4de5b0f1bd4ed9f0c830ae6949e39c18f0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Aug 2012 11:07:51 +0200 Subject: pinctrl/nomadik: fix null in irqdomain errorpath The irqdomain conversion failed to notice that we do not always have a DT node to dereference, fix this up by using a simple dev_err() that also tells the name of the device. Cc: Loic Pallardy Cc: Patrice Chotard Acked-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-nomadik.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index ec6ac501b23..3dde6537adb 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1292,7 +1292,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) NOMADIK_GPIO_TO_IRQ(pdata->first_gpio), 0, &nmk_gpio_irq_simple_ops, nmk_chip); if (!nmk_chip->domain) { - pr_err("%s: Failed to create irqdomain\n", np->full_name); + dev_err(&dev->dev, "failed to create irqdomain\n"); ret = -ENOSYS; goto out; } -- cgit v1.2.3-70-g09d2 From d1a83d3b1729ac53ebcc6134f0d88faa311c42b9 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 9 Aug 2012 21:02:19 +0200 Subject: Documentation/pinctrl.txt: Fix some misspelled macros Signed-off-by: Daniel Mack Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index e40f4b4e197..1479aca2374 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -840,9 +840,9 @@ static unsigned long i2c_pin_configs[] = { static struct pinctrl_map __initdata mapping[] = { PIN_MAP_MUX_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", "i2c0"), - PIN_MAP_MUX_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs), - PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs), - PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs), + PIN_MAP_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs), + PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs), + PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs), }; Finally, some devices expect the mapping table to contain certain specific -- cgit v1.2.3-70-g09d2 From ac5aa7f9e0891a115ab307b4bdde9c55b9232970 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 10 Aug 2012 16:52:58 +0200 Subject: pinctrl: header: trivial: declare struct device As struct device is used as a function argument, it should at least be declared (device.h is not included). Signed-off-by: Richard Genoud Signed-off-by: Linus Walleij --- include/linux/pinctrl/consumer.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h index 6dd96fb4548..e9b7f435084 100644 --- a/include/linux/pinctrl/consumer.h +++ b/include/linux/pinctrl/consumer.h @@ -20,6 +20,7 @@ /* This struct is private to the core and should be regarded as a cookie */ struct pinctrl; struct pinctrl_state; +struct device; #ifdef CONFIG_PINCTRL -- cgit v1.2.3-70-g09d2 From d599bfb324ad74e63b616809c1c13c76d1493cf9 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 10 Aug 2012 16:53:49 +0200 Subject: trivial: pinctrl core: remove extraneous code lines In function pinctrl_get_locked, pointer p is returned on error, and also return on no_error. So, we just return it with no error test. It's pretty the same in function pinctrl_lookup_state_locked: state is returned in every case, so we drop the error test and just return state. Signed-off-by: Richard Genoud --- drivers/pinctrl/core.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index fb7f3bebdc6..dc5c126e398 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -657,11 +657,7 @@ static struct pinctrl *pinctrl_get_locked(struct device *dev) if (p != NULL) return ERR_PTR(-EBUSY); - p = create_pinctrl(dev); - if (IS_ERR(p)) - return p; - - return p; + return create_pinctrl(dev); } /** @@ -738,11 +734,8 @@ static struct pinctrl_state *pinctrl_lookup_state_locked(struct pinctrl *p, dev_dbg(p->dev, "using pinctrl dummy state (%s)\n", name); state = create_state(p, name); - if (IS_ERR(state)) - return state; - } else { - return ERR_PTR(-ENODEV); - } + } else + state = ERR_PTR(-ENODEV); } return state; -- cgit v1.2.3-70-g09d2 From b20fd25a947584cf949ad3066e41697c5cdad816 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Aug 2012 22:18:52 +0800 Subject: pinctrl: imx51: fix .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI The .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI should be 0x7bc rather than NO_PAD. This error will cause SD2 probe failure. Signed-off-by: Shawn Guo Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-imx51.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-imx51.c b/drivers/pinctrl/pinctrl-imx51.c index 689b3c88dd2..9fd02162a3c 100644 --- a/drivers/pinctrl/pinctrl-imx51.c +++ b/drivers/pinctrl/pinctrl-imx51.c @@ -974,7 +974,7 @@ static struct imx_pin_reg imx51_pin_regs[] = { IMX_PIN_REG(MX51_PAD_EIM_DA13, NO_PAD, 0x050, 0, 0x000, 0), /* MX51_PAD_EIM_DA13__EIM_DA13 */ IMX_PIN_REG(MX51_PAD_EIM_DA14, NO_PAD, 0x054, 0, 0x000, 0), /* MX51_PAD_EIM_DA14__EIM_DA14 */ IMX_PIN_REG(MX51_PAD_EIM_DA15, NO_PAD, 0x058, 0, 0x000, 0), /* MX51_PAD_EIM_DA15__EIM_DA15 */ - IMX_PIN_REG(MX51_PAD_SD2_CMD, NO_PAD, 0x3b4, 2, 0x91c, 3), /* MX51_PAD_SD2_CMD__CSPI_MOSI */ + IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 2, 0x91c, 3), /* MX51_PAD_SD2_CMD__CSPI_MOSI */ IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 1, 0x9b0, 2), /* MX51_PAD_SD2_CMD__I2C1_SCL */ IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 0, 0x000, 0), /* MX51_PAD_SD2_CMD__SD2_CMD */ IMX_PIN_REG(MX51_PAD_SD2_CLK, 0x7c0, 0x3b8, 2, 0x914, 3), /* MX51_PAD_SD2_CLK__CSPI_SCLK */ -- cgit v1.2.3-70-g09d2 From 4c39104da846379151b9c37cffaf8b00a5580229 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Fri, 10 Aug 2012 11:02:19 +0200 Subject: pinctrl/nomadik: add kp_b_2 keyboard function group list There is yet another way to mux the keyboard, so fix up that group. Signed-off-by: Patrice Chotard Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-nomadik-db8500.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-nomadik-db8500.c b/drivers/pinctrl/pinctrl-nomadik-db8500.c index 5f3e9d0221e..a39fb7a6fc5 100644 --- a/drivers/pinctrl/pinctrl-nomadik-db8500.c +++ b/drivers/pinctrl/pinctrl-nomadik-db8500.c @@ -505,6 +505,8 @@ static const unsigned kp_b_1_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1, DB8500_PIN_J3, DB8500_PIN_H2, DB8500_PIN_J2, DB8500_PIN_H1, DB8500_PIN_F4, DB8500_PIN_E3, DB8500_PIN_E4, DB8500_PIN_D2, DB8500_PIN_C1, DB8500_PIN_D3, DB8500_PIN_C2, DB8500_PIN_D5 }; +static const unsigned kp_b_2_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1, + DB8500_PIN_G3, DB8500_PIN_G2, DB8500_PIN_F4, DB8500_PIN_E3}; static const unsigned sm_b_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3, DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6, DB8500_PIN_D6, DB8500_PIN_B7, DB8500_PIN_D7, DB8500_PIN_D8, @@ -662,6 +664,7 @@ static const struct nmk_pingroup nmk_db8500_groups[] = { DB8500_PIN_GROUP(spi3_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(msp1txrx_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(kp_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(kp_b_2, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(sm_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(smcs0_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(smcs1_b_1, NMK_GPIO_ALT_B), @@ -751,7 +754,7 @@ DB8500_FUNC_GROUPS(msp1, "msp1txrx_a_1", "msp1_a_1", "msp1txrx_b_1"); DB8500_FUNC_GROUPS(lcdb, "lcdb_a_1"); DB8500_FUNC_GROUPS(lcd, "lcdvsi0_a_1", "lcdvsi1_a_1", "lcd_d0_d7_a_1", "lcd_d8_d11_a_1", "lcd_d12_d23_a_1", "lcd_b_1"); -DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_b_1", "kp_c_1", "kp_oc1_1"); +DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_b_1", "kp_b_2", "kp_c_1", "kp_oc1_1"); DB8500_FUNC_GROUPS(mc2, "mc2_a_1", "mc2rstn_c_1"); DB8500_FUNC_GROUPS(ssp1, "ssp1_a_1"); DB8500_FUNC_GROUPS(ssp0, "ssp0_a_1"); -- cgit v1.2.3-70-g09d2 From 97f50c6c415d84c612094d9514a3df3d70ab30e3 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Aug 2012 16:47:27 +0100 Subject: ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500' The platform attempts to register platform device 'snd_soc_u8500' which doesn't actually exist. Here we change the reference to the correct one 'snd_soc_mop500'. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-msp.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 99604803874..df15646036a 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, return pdev; } -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", .id = 0, .dev = { .platform_data = NULL, @@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent) { struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, -- cgit v1.2.3-70-g09d2 From 46a8b9837da20206c6daca11949485fab7b6e875 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Aug 2012 16:47:28 +0100 Subject: ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled Previous attempts to add platform probing of the Audio related devices only call from non-DT initialisation functions. This patch extends that functionality to the Device Tree related ones too. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8674a890fd1..a534d8880de 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -797,6 +797,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -804,6 +805,8 @@ static void __init u8500_init_machine(void) mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + mop500_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -815,6 +818,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; -- cgit v1.2.3-70-g09d2 From 7612bfeecc197bbb6629842b5c6ff1967f0a9b70 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 15 Aug 2012 11:41:55 -0700 Subject: Yama: access task_struct->comm directly The core ptrace access checking routine holds a task lock, and when reporting a failure, Yama takes a separate task lock. To avoid a potential deadlock with two ptracers taking the opposite locks, do not use get_task_comm() and just use ->comm directly since accuracy is not important for the report. Reported-by: Fengguang Wu Suggested-by: Oleg Nesterov CC: stable@vger.kernel.org Signed-off-by: Kees Cook Acked-by: John Johansen Signed-off-by: James Morris --- security/yama/yama_lsm.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/security/yama/yama_lsm.c b/security/yama/yama_lsm.c index d51b7c76c37..0cc99a3ea42 100644 --- a/security/yama/yama_lsm.c +++ b/security/yama/yama_lsm.c @@ -279,12 +279,9 @@ static int yama_ptrace_access_check(struct task_struct *child, } if (rc) { - char name[sizeof(current->comm)]; printk_ratelimited(KERN_NOTICE "ptrace of pid %d was attempted by: %s (pid %d)\n", - child->pid, - get_task_comm(name, current), - current->pid); + child->pid, current->comm, current->pid); } return rc; @@ -319,12 +316,9 @@ static int yama_ptrace_traceme(struct task_struct *parent) } if (rc) { - char name[sizeof(current->comm)]; printk_ratelimited(KERN_NOTICE "ptraceme of pid %d was attempted by: %s (pid %d)\n", - current->pid, - get_task_comm(name, parent), - parent->pid); + current->pid, parent->comm, parent->pid); } return rc; -- cgit v1.2.3-70-g09d2 From dfeb86ecde7ae6ce15bd69a6a205b5e13aea8111 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 2 Aug 2012 12:32:42 +0530 Subject: pwm: Add missing static storage class specifiers in core.c file Fixes the following sparse warnings: drivers/pwm/core.c:152:6: warning: symbol 'of_pwmchip_add' was not declared. Should it be static? drivers/pwm/core.c:165:6: warning: symbol 'of_pwmchip_remove' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Thierry Reding --- drivers/pwm/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index ecb76909e94..4a8bdfa79e7 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -149,7 +149,7 @@ static struct pwm_device *of_pwm_simple_xlate(struct pwm_chip *pc, return pwm; } -void of_pwmchip_add(struct pwm_chip *chip) +static void of_pwmchip_add(struct pwm_chip *chip) { if (!chip->dev || !chip->dev->of_node) return; @@ -162,7 +162,7 @@ void of_pwmchip_add(struct pwm_chip *chip) of_node_get(chip->dev->of_node); } -void of_pwmchip_remove(struct pwm_chip *chip) +static void of_pwmchip_remove(struct pwm_chip *chip) { if (chip->dev && chip->dev->of_node) of_node_put(chip->dev->of_node); -- cgit v1.2.3-70-g09d2 From ecefeb79218064bf011c5d3ff25322ffa60c302c Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 2 Aug 2012 17:55:54 +0900 Subject: pwm: samsung: add missing device pointer to struct pwm_chip This patch adds missing device pointer to struct pwm_chip. If the device pointer is NULL, pwmchip_add() will return error. Signed-off-by: Jingoo Han Signed-off-by: Thierry Reding --- drivers/pwm/pwm-samsung.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c index d10386528c9..e5187c0ade9 100644 --- a/drivers/pwm/pwm-samsung.c +++ b/drivers/pwm/pwm-samsung.c @@ -225,6 +225,7 @@ static int s3c_pwm_probe(struct platform_device *pdev) /* calculate base of control bits in TCON */ s3c->tcon_base = id == 0 ? 0 : (id * 4) + 4; + s3c->chip.dev = &pdev->dev; s3c->chip.ops = &s3c_pwm_ops; s3c->chip.base = -1; s3c->chip.npwm = 1; -- cgit v1.2.3-70-g09d2 From 2ffdc9a64824a373d09f3417ae4377ec83cd9d16 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 3 Aug 2012 21:43:54 +0800 Subject: pwm: Remove a redundant error message when devm_request_and_ioremap fails The implementation in devm_request_and_ioremap() already shows error message, so no need to show dev_err again if devm_request_and_ioremap() fails. Signed-off-by: Axel Lin Cc: Stephen Warren Cc: Philip, Avinash Signed-off-by: Thierry Reding --- drivers/pwm/pwm-tegra.c | 4 +--- drivers/pwm/pwm-tiecap.c | 4 +--- drivers/pwm/pwm-tiehrpwm.c | 4 +--- 3 files changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index 02ce18d5e49..057465e0553 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -187,10 +187,8 @@ static int tegra_pwm_probe(struct platform_device *pdev) } pwm->mmio_base = devm_request_and_ioremap(&pdev->dev, r); - if (!pwm->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() region\n"); + if (!pwm->mmio_base) return -EADDRNOTAVAIL; - } platform_set_drvdata(pdev, pwm); diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index 3c2ad284ee3..0b66d0f2592 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -192,10 +192,8 @@ static int __devinit ecap_pwm_probe(struct platform_device *pdev) } pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r); - if (!pc->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); + if (!pc->mmio_base) return -EADDRNOTAVAIL; - } ret = pwmchip_add(&pc->chip); if (ret < 0) { diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index 010d232cb0c..c3756d1be19 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -371,10 +371,8 @@ static int __devinit ehrpwm_pwm_probe(struct platform_device *pdev) } pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r); - if (!pc->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); + if (!pc->mmio_base) return -EADDRNOTAVAIL; - } ret = pwmchip_add(&pc->chip); if (ret < 0) { -- cgit v1.2.3-70-g09d2 From eba7cbe5d8bbc3bc24f46973e44f1566f81d1f56 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 10 Aug 2012 10:12:09 +0530 Subject: pwm: vt8500: Fix coding style issue Fixes the following: WARNING: Prefer pr_warn(... to pr_warning(... pr_warning("Waiting for status bits 0x%x to clear timed out\n", Signed-off-by: Sachin Kamat Signed-off-by: Thierry Reding --- drivers/pwm/pwm-vt8500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c index 548021439f0..ad14389b714 100644 --- a/drivers/pwm/pwm-vt8500.c +++ b/drivers/pwm/pwm-vt8500.c @@ -41,7 +41,7 @@ static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask) cpu_relax(); if (unlikely(!loops)) - pr_warning("Waiting for status bits 0x%x to clear timed out\n", + pr_warn("Waiting for status bits 0x%x to clear timed out\n", bitmask); } -- cgit v1.2.3-70-g09d2 From e50d3523ff45646a48666ebbd3d8aeb0c75084ed Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 10 Aug 2012 16:41:13 +0530 Subject: pwm: core: Fix coding style issues Fixes the following: WARNING: line over 80 characters ERROR: spaces required around that ':' (ctx:VxW) WARNING: Prefer pr_warn(... to pr_warning(... Signed-off-by: Sachin Kamat Signed-off-by: Thierry Reding --- drivers/pwm/core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index 4a8bdfa79e7..c6e05078d3a 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -129,8 +129,8 @@ static int pwm_device_request(struct pwm_device *pwm, const char *label) return 0; } -static struct pwm_device *of_pwm_simple_xlate(struct pwm_chip *pc, - const struct of_phandle_args *args) +static struct pwm_device * +of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args) { struct pwm_device *pwm; @@ -527,7 +527,7 @@ void __init pwm_add_table(struct pwm_lookup *table, size_t num) struct pwm_device *pwm_get(struct device *dev, const char *con_id) { struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER); - const char *dev_id = dev ? dev_name(dev): NULL; + const char *dev_id = dev ? dev_name(dev) : NULL; struct pwm_chip *chip = NULL; unsigned int index = 0; unsigned int best = 0; @@ -609,7 +609,7 @@ void pwm_put(struct pwm_device *pwm) mutex_lock(&pwm_lock); if (!test_and_clear_bit(PWMF_REQUESTED, &pwm->flags)) { - pr_warning("PWM device already freed\n"); + pr_warn("PWM device already freed\n"); goto out; } -- cgit v1.2.3-70-g09d2 From 7a4c5de27efa4c2ecca87af0a3deea63446367e2 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 10 Aug 2012 13:57:52 -0400 Subject: ext4: don't call ext4_error while block group is locked While in ext4_validate_block_bitmap(), if an block allocation bitmap is found to be invalid, we call ext4_error() while the block group is still locked. This causes ext4_commit_super() to call a function which might sleep while in an atomic context. There's no need to keep the block group locked at this point, so hoist the ext4_error() call up to ext4_validate_block_bitmap() and release the block group spinlock before calling ext4_error(). The reported stack trace can be found at: http://article.gmane.org/gmane.comp.file-systems.ext4/33731 Reported-by: Dave Jones Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- fs/ext4/balloc.c | 62 +++++++++++++++++++++++++++++++++----------------------- fs/ext4/bitmap.c | 1 - 2 files changed, 37 insertions(+), 26 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index d23b31ca9d7..1b5089067d0 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -280,14 +280,18 @@ struct ext4_group_desc * ext4_get_group_desc(struct super_block *sb, return desc; } -static int ext4_valid_block_bitmap(struct super_block *sb, - struct ext4_group_desc *desc, - unsigned int block_group, - struct buffer_head *bh) +/* + * Return the block number which was discovered to be invalid, or 0 if + * the block bitmap is valid. + */ +static ext4_fsblk_t ext4_valid_block_bitmap(struct super_block *sb, + struct ext4_group_desc *desc, + unsigned int block_group, + struct buffer_head *bh) { ext4_grpblk_t offset; ext4_grpblk_t next_zero_bit; - ext4_fsblk_t bitmap_blk; + ext4_fsblk_t blk; ext4_fsblk_t group_first_block; if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) { @@ -297,37 +301,33 @@ static int ext4_valid_block_bitmap(struct super_block *sb, * or it has to also read the block group where the bitmaps * are located to verify they are set. */ - return 1; + return 0; } group_first_block = ext4_group_first_block_no(sb, block_group); /* check whether block bitmap block number is set */ - bitmap_blk = ext4_block_bitmap(sb, desc); - offset = bitmap_blk - group_first_block; + blk = ext4_block_bitmap(sb, desc); + offset = blk - group_first_block; if (!ext4_test_bit(offset, bh->b_data)) /* bad block bitmap */ - goto err_out; + return blk; /* check whether the inode bitmap block number is set */ - bitmap_blk = ext4_inode_bitmap(sb, desc); - offset = bitmap_blk - group_first_block; + blk = ext4_inode_bitmap(sb, desc); + offset = blk - group_first_block; if (!ext4_test_bit(offset, bh->b_data)) /* bad block bitmap */ - goto err_out; + return blk; /* check whether the inode table block number is set */ - bitmap_blk = ext4_inode_table(sb, desc); - offset = bitmap_blk - group_first_block; + blk = ext4_inode_table(sb, desc); + offset = blk - group_first_block; next_zero_bit = ext4_find_next_zero_bit(bh->b_data, offset + EXT4_SB(sb)->s_itb_per_group, offset); - if (next_zero_bit >= offset + EXT4_SB(sb)->s_itb_per_group) - /* good bitmap for inode tables */ - return 1; - -err_out: - ext4_error(sb, "Invalid block bitmap - block_group = %d, block = %llu", - block_group, bitmap_blk); + if (next_zero_bit < offset + EXT4_SB(sb)->s_itb_per_group) + /* bad bitmap for inode tables */ + return blk; return 0; } @@ -336,14 +336,26 @@ void ext4_validate_block_bitmap(struct super_block *sb, unsigned int block_group, struct buffer_head *bh) { + ext4_fsblk_t blk; + if (buffer_verified(bh)) return; ext4_lock_group(sb, block_group); - if (ext4_valid_block_bitmap(sb, desc, block_group, bh) && - ext4_block_bitmap_csum_verify(sb, block_group, desc, bh, - EXT4_BLOCKS_PER_GROUP(sb) / 8)) - set_buffer_verified(bh); + blk = ext4_valid_block_bitmap(sb, desc, block_group, bh); + if (unlikely(blk != 0)) { + ext4_unlock_group(sb, block_group); + ext4_error(sb, "bg %u: block %llu: invalid block bitmap", + block_group, blk); + return; + } + if (unlikely(!ext4_block_bitmap_csum_verify(sb, block_group, + desc, bh, EXT4_BLOCKS_PER_GROUP(sb) / 8))) { + ext4_unlock_group(sb, block_group); + ext4_error(sb, "bg %u: bad block bitmap checksum", block_group); + return; + } + set_buffer_verified(bh); ext4_unlock_group(sb, block_group); } diff --git a/fs/ext4/bitmap.c b/fs/ext4/bitmap.c index f8716eab999..5c2d1813ebe 100644 --- a/fs/ext4/bitmap.c +++ b/fs/ext4/bitmap.c @@ -79,7 +79,6 @@ int ext4_block_bitmap_csum_verify(struct super_block *sb, ext4_group_t group, if (provided == calculated) return 1; - ext4_error(sb, "Bad block bitmap checksum: block_group = %u", group); return 0; } -- cgit v1.2.3-70-g09d2 From 0548bbb85337e532ca2ed697c3e9b227ff2ed4b4 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 16 Aug 2012 11:59:04 -0400 Subject: ext4: fix long mount times on very big file systems Commit 8aeb00ff85a: "ext4: fix overhead calculation used by ext4_statfs()" introduced a O(n**2) calculation which makes very large file systems take forever to mount. Fix this with an optimization for non-bigalloc file systems. (For bigalloc file systems the overhead needs to be set in the the superblock.) Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- fs/ext4/super.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 56bcaec9149..59849890403 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3120,6 +3120,10 @@ static int count_overhead(struct super_block *sb, ext4_group_t grp, ext4_group_t i, ngroups = ext4_get_groups_count(sb); int s, j, count = 0; + if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_BIGALLOC)) + return (ext4_bg_has_super(sb, grp) + ext4_bg_num_gdb(sb, grp) + + sbi->s_itb_per_group + 2); + first_block = le32_to_cpu(sbi->s_es->s_first_data_block) + (grp * EXT4_BLOCKS_PER_GROUP(sb)); last_block = first_block + EXT4_BLOCKS_PER_GROUP(sb) - 1; -- cgit v1.2.3-70-g09d2 From 250a41e0ecc433cdd553a364d0fc74c766425209 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 17 Aug 2012 09:27:35 -0400 Subject: xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID. If P2M leaf is completly packed with INVALID_P2M_ENTRY or with 1:1 PFNs (so IDENTITY_FRAME type PFNs), we can swap the P2M leaf with either a p2m_missing or p2m_identity respectively. The old page (which was created via extend_brk or was grafted on from the mfn_list) can be re-used for setting new PFNs. This also means we can remove git commit: 5bc6f9888db5739abfa0cae279b4b442e4db8049 xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back which tried to fix this. and make the amount that is required to be reserved much smaller. CC: stable@vger.kernel.org # for 3.5 only. Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/p2m.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 92 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index b2e91d40a4c..d4b25546325 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -196,9 +196,11 @@ RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3); /* When we populate back during bootup, the amount of pages can vary. The * max we have is seen is 395979, but that does not mean it can't be more. - * But some machines can have 3GB I/O holes even. So lets reserve enough - * for 4GB of I/O and E820 holes. */ -RESERVE_BRK(p2m_populated, PMD_SIZE * 4); + * Some machines can have 3GB I/O holes even. With early_can_reuse_p2m_middle + * it can re-use Xen provided mfn_list array, so we only need to allocate at + * most three P2M top nodes. */ +RESERVE_BRK(p2m_populated, PAGE_SIZE * 3); + static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_P2M_PFN); @@ -575,12 +577,99 @@ static bool __init early_alloc_p2m(unsigned long pfn) } return true; } + +/* + * Skim over the P2M tree looking at pages that are either filled with + * INVALID_P2M_ENTRY or with 1:1 PFNs. If found, re-use that page and + * replace the P2M leaf with a p2m_missing or p2m_identity. + * Stick the old page in the new P2M tree location. + */ +bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_mfn) +{ + unsigned topidx; + unsigned mididx; + unsigned ident_pfns; + unsigned inv_pfns; + unsigned long *p2m; + unsigned long *mid_mfn_p; + unsigned idx; + unsigned long pfn; + + /* We only look when this entails a P2M middle layer */ + if (p2m_index(set_pfn)) + return false; + + for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { + topidx = p2m_top_index(pfn); + + if (!p2m_top[topidx]) + continue; + + if (p2m_top[topidx] == p2m_mid_missing) + continue; + + mididx = p2m_mid_index(pfn); + p2m = p2m_top[topidx][mididx]; + if (!p2m) + continue; + + if ((p2m == p2m_missing) || (p2m == p2m_identity)) + continue; + + if ((unsigned long)p2m == INVALID_P2M_ENTRY) + continue; + + ident_pfns = 0; + inv_pfns = 0; + for (idx = 0; idx < P2M_PER_PAGE; idx++) { + /* IDENTITY_PFNs are 1:1 */ + if (p2m[idx] == IDENTITY_FRAME(pfn + idx)) + ident_pfns++; + else if (p2m[idx] == INVALID_P2M_ENTRY) + inv_pfns++; + else + break; + } + if ((ident_pfns == P2M_PER_PAGE) || (inv_pfns == P2M_PER_PAGE)) + goto found; + } + return false; +found: + /* Found one, replace old with p2m_identity or p2m_missing */ + p2m_top[topidx][mididx] = (ident_pfns ? p2m_identity : p2m_missing); + /* And the other for save/restore.. */ + mid_mfn_p = p2m_top_mfn_p[topidx]; + /* NOTE: Even if it is a p2m_identity it should still be point to + * a page filled with INVALID_P2M_ENTRY entries. */ + mid_mfn_p[mididx] = virt_to_mfn(p2m_missing); + + /* Reset where we want to stick the old page in. */ + topidx = p2m_top_index(set_pfn); + mididx = p2m_mid_index(set_pfn); + + /* This shouldn't happen */ + if (WARN_ON(p2m_top[topidx] == p2m_mid_missing)) + early_alloc_p2m(set_pfn); + + if (WARN_ON(p2m_top[topidx][mididx] != p2m_missing)) + return false; + + p2m_init(p2m); + p2m_top[topidx][mididx] = p2m; + mid_mfn_p = p2m_top_mfn_p[topidx]; + mid_mfn_p[mididx] = virt_to_mfn(p2m); + + return true; +} bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn) { if (unlikely(!__set_phys_to_machine(pfn, mfn))) { if (!early_alloc_p2m(pfn)) return false; + if (early_can_reuse_p2m_middle(pfn, mfn)) + return __set_phys_to_machine(pfn, mfn); + if (!early_alloc_p2m_middle(pfn, false /* boundary crossover OK!*/)) return false; -- cgit v1.2.3-70-g09d2 From 89a4e48f8479f8145eca9698f39fe188c982212f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 17 Aug 2012 08:54:52 -0400 Subject: ext4: fix kernel BUG on large-scale rm -rf commands MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 968dee7722: "ext4: fix hole punch failure when depth is greater than 0" introduced a regression in v3.5.1/v3.6-rc1 which caused kernel crashes when users ran run "rm -rf" on large directory hierarchy on ext4 filesystems on RAID devices: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 Process rm (pid: 18229, threadinfo ffff8801276bc000, task ffff880123631710) Call Trace: [] ? __ext4_handle_dirty_metadata+0x83/0x110 [] ext4_ext_truncate+0x193/0x1d0 [] ? ext4_mark_inode_dirty+0x7f/0x1f0 [] ext4_truncate+0xf5/0x100 [] ext4_evict_inode+0x461/0x490 [] evict+0xa2/0x1a0 [] iput+0x103/0x1f0 [] do_unlinkat+0x154/0x1c0 [] ? sys_newfstatat+0x2a/0x40 [] sys_unlinkat+0x1b/0x50 [] system_call_fastpath+0x16/0x1b Code: 8b 4d 20 0f b7 41 02 48 8d 04 40 48 8d 04 81 49 89 45 18 0f b7 49 02 48 83 c1 01 49 89 4d 00 e9 ae f8 ff ff 0f 1f 00 49 8b 45 28 <48> 8b 40 28 49 89 45 20 e9 85 f8 ff ff 0f 1f 80 00 00 00 RIP [] ext4_ext_remove_space+0xa34/0xdf0 This could be reproduced as follows: The problem in commit 968dee7722 was that caused the variable 'i' to be left uninitialized if the truncate required more space than was available in the journal. This resulted in the function ext4_ext_truncate_extend_restart() returning -EAGAIN, which caused ext4_ext_remove_space() to restart the truncate operation after starting a new jbd2 handle. Reported-by: Maciej Żenczykowski Reported-by: Marti Raudsepp Tested-by: Fengguang Wu Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- fs/ext4/extents.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index cd0c7ed0677..aabbb3f5368 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2662,6 +2662,7 @@ cont: } path[0].p_depth = depth; path[0].p_hdr = ext_inode_hdr(inode); + i = 0; if (ext4_ext_check(inode, path[0].p_hdr, depth)) { err = -EIO; -- cgit v1.2.3-70-g09d2 From d807ff838f48e7778996e577e2a57a5796c32e84 Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Fri, 17 Aug 2012 11:09:04 +0800 Subject: autofs4 - fix expire check In some cases when an autofs indirect mount is contained in a file system that is marked as shared (such as when systemd does the equivalent of "mount --make-rshared /" early in the boot), mounts stop expiring. When this happens the first expiry check on a mountpoint dentry in autofs_expire_indirect() sees a mountpoint dentry with a higher than minimal reference count. Consequently the dentry is condidered busy and the actual expiry check is never done. This particular check was originally meant as an optimisation to detect a path walk in progress but with the addition of rcu-walk it can be ineffective anyway. Removing the test allows automounts to expire again since the actual expire check doesn't rely on the dentry reference count. Signed-off-by: Ian Kent Signed-off-by: Linus Torvalds --- fs/autofs4/expire.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c index 8c0e56d9293..842d00048a6 100644 --- a/fs/autofs4/expire.c +++ b/fs/autofs4/expire.c @@ -399,11 +399,6 @@ struct dentry *autofs4_expire_indirect(struct super_block *sb, DPRINTK("checking mountpoint %p %.*s", dentry, (int)dentry->d_name.len, dentry->d_name.name); - /* Path walk currently on this dentry? */ - ino_count = atomic_read(&ino->count) + 2; - if (dentry->d_count > ino_count) - goto next; - /* Can we umount this guy */ if (autofs4_mount_busy(mnt, dentry)) goto next; -- cgit v1.2.3-70-g09d2 From 127c6e731106a2071ee4a6c5a34c471cd3e719f0 Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Tue, 7 Aug 2012 09:59:40 +0800 Subject: booke/wdt: some ioctls do not return values properly Fix some booke wdt ioctls return value error. Signed-off-by: Tiejun Chen Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- drivers/watchdog/booke_wdt.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 3fe82d0e8ca..5b06d31ab6a 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -166,18 +166,17 @@ static long booke_wdt_ioctl(struct file *file, switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user((void *)arg, &ident, sizeof(ident))) - return -EFAULT; + return copy_to_user(p, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: return put_user(0, p); case WDIOC_GETBOOTSTATUS: /* XXX: something is clearing TSR */ tmp = mfspr(SPRN_TSR) & TSR_WRS(3); /* returns CARDRESET if last reset was caused by the WDT */ - return (tmp ? WDIOF_CARDRESET : 0); + return put_user((tmp ? WDIOF_CARDRESET : 0), p); case WDIOC_SETOPTIONS: if (get_user(tmp, p)) - return -EINVAL; + return -EFAULT; if (tmp == WDIOS_ENABLECARD) { booke_wdt_ping(); break; -- cgit v1.2.3-70-g09d2 From 0df7c0e3a73f5d12bca24d81ee5ed52947b372b6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 16 Aug 2012 16:23:20 -0700 Subject: scripts/kernel-doc: fix fatal script error Fix fatal error in scripts/kernel-doc by ignoring the "__weak" attribute: Error(drivers/pci/pci.c:2820): cannot understand prototype: 'char * __weak pcibios_setup(char *str) ' Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- scripts/kernel-doc | 1 + 1 file changed, 1 insertion(+) diff --git a/scripts/kernel-doc b/scripts/kernel-doc index 9b0c0b8b4ab..8fd107a3fac 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -1786,6 +1786,7 @@ sub dump_function($$) { $prototype =~ s/__init +//; $prototype =~ s/__init_or_module +//; $prototype =~ s/__must_check +//; + $prototype =~ s/__weak +//; $prototype =~ s/^#\s*define\s+//; #ak added $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//; -- cgit v1.2.3-70-g09d2 From bbb4ab43f82adf02c8b4d0d7e7b7e79d24204b05 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 17 Aug 2012 09:51:50 -0500 Subject: ahci: un-staticize ahci_dev_classify Make ahci_dev_classify available to the ahci platform driver for custom hard reset function. Signed-off-by: Rob Herring Signed-off-by: Jeff Garzik --- drivers/ata/ahci.h | 1 + drivers/ata/libahci.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index c2594ddf25b..57eb1c212a4 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -320,6 +320,7 @@ extern struct device_attribute *ahci_sdev_attrs[]; extern struct ata_port_operations ahci_ops; extern struct ata_port_operations ahci_pmp_retry_srst_ops; +unsigned int ahci_dev_classify(struct ata_port *ap); void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts); void ahci_save_initial_config(struct device *dev, diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index f9eaa82311a..555c07afa05 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1139,7 +1139,7 @@ static void ahci_dev_config(struct ata_device *dev) } } -static unsigned int ahci_dev_classify(struct ata_port *ap) +unsigned int ahci_dev_classify(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); struct ata_taskfile tf; @@ -1153,6 +1153,7 @@ static unsigned int ahci_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } +EXPORT_SYMBOL_GPL(ahci_dev_classify); void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts) -- cgit v1.2.3-70-g09d2 From 1117c811a64d948c9f88ee80a0c7f35e9fea1d69 Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Fri, 17 Aug 2012 10:11:15 +0200 Subject: pata_atiixp: override cable detection on MSI E350DM-E33 The mainboard MSI E350DM-E33 is advertised with 6 SATA ports. As it turns out, two of them seem to be driven by on-board SATA<->PATA converters. If a disk drive is connected to one of them kernel uses UDMA/33 mode due to cable detection: [ 34.550823] scsi4 : pata_atiixp [ 34.555517] scsi5 : pata_atiixp [ 34.555942] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14 [ 34.555948] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15 ... [ 35.040799] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 [ 35.040806] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 35.040817] ata5.00: limited to UDMA/33 due to 40-wire cable [ 35.049166] ata5.00: configured for UDMA/33 [ 35.049402] scsi 4:0:0:0: Direct-Access ATA WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5 This patch forces "short cable" mode on this board, as it seems clear that the on-board SATA<->PATA "cable" is short. With this patch the disk is configured for UDMA/100: [ 5.976756] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 [ 5.996434] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 6.024787] ata5.00: configured for UDMA/100 Testing revealed no transfer issues. Signed-off-by: Arnd Hannemann Signed-off-by: Jeff Garzik --- drivers/ata/pata_atiixp.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 361c75cea57..24e51056ac2 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -20,6 +20,7 @@ #include #include #include +#include #define DRV_NAME "pata_atiixp" #define DRV_VERSION "0.4.6" @@ -33,11 +34,26 @@ enum { ATIIXP_IDE_UDMA_MODE = 0x56 }; +static const struct dmi_system_id attixp_cable_override_dmi_table[] = { + { + /* Board has onboard PATA<->SATA converters */ + .ident = "MSI E350DM-E33", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MSI"), + DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"), + }, + }, + { } +}; + static int atiixp_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 udma; + if (dmi_check_system(attixp_cable_override_dmi_table)) + return ATA_CBL_PATA40_SHORT; + /* Hack from drivers/ide/pci. Really we want to know how to do the raw detection not play follow the bios mode guess */ pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma); -- cgit v1.2.3-70-g09d2 From 77b12bc9cf7b10c7c1a04ca45272fbb4287902d0 Mon Sep 17 00:00:00 2001 From: James Ralston Date: Thu, 9 Aug 2012 09:02:31 -0700 Subject: ahci: Add Device IDs for Intel Lynx Point-LP PCH This patch adds the AHCI-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 062e6a1a248..50d5dea0ff5 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -256,6 +256,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point RAID */ { PCI_VDEVICE(INTEL, 0x8c0e), board_ahci }, /* Lynx Point RAID */ { PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x9c02), board_ahci }, /* Lynx Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c03), board_ahci }, /* Lynx Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c04), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c05), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c06), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c07), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c0e), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c0f), board_ahci }, /* Lynx Point-LP RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, -- cgit v1.2.3-70-g09d2 From 389cd784969e9148fedcde0608f15bd74d6b769e Mon Sep 17 00:00:00 2001 From: James Ralston Date: Thu, 9 Aug 2012 09:34:20 -0700 Subject: ata_piix: Add Device IDs for Intel Lynx Point-LP PCH This patch adds the IDE-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3c809bfbccf..ef773e12af7 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -329,6 +329,14 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (Lynx Point) */ { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (DH89xxCC) */ { 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, { } /* terminate list */ -- cgit v1.2.3-70-g09d2 From 834009170986f295c5eca37c76c59f1b28670d69 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Wed, 15 Aug 2012 17:08:12 +0800 Subject: [libata] acpi: call ata_acpi_gtm during ata port init time Commit 30dcf76acc695cbd2fa919e294670fe9552e16e7 mistakenly dropped the code to get an initial gtm for the IDE channel. This caused the following problem for Sergei: http://marc.info/?l=linux-kernel&m=134484963618457&w=2 Fix this by adding the call back in ata_acpi_bind_host, and due to this, the ata_ap_acpi_handle is modified accordingly. Tested-by: Sergei Trofimovich Signed-off-by: Aaron Lu Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 902b5a45717..fd9ecf74e63 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -60,17 +60,7 @@ acpi_handle ata_ap_acpi_handle(struct ata_port *ap) if (ap->flags & ATA_FLAG_ACPI_SATA) return NULL; - /* - * If acpi bind operation has already happened, we can get the handle - * for the port by checking the corresponding scsi_host device's - * firmware node, otherwise we will need to find out the handle from - * its parent's acpi node. - */ - if (ap->scsi_host) - return DEVICE_ACPI_HANDLE(&ap->scsi_host->shost_gendev); - else - return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), - ap->port_no); + return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), ap->port_no); } EXPORT_SYMBOL(ata_ap_acpi_handle); @@ -1101,6 +1091,9 @@ static int ata_acpi_bind_host(struct ata_port *ap, acpi_handle *handle) if (!*handle) return -ENODEV; + if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0) + ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; + return 0; } -- cgit v1.2.3-70-g09d2 From ebd600281566ab40fb2e3004af7eacb3375626d1 Mon Sep 17 00:00:00 2001 From: Paul Menzel Date: Sun, 12 Aug 2012 23:43:42 +0200 Subject: [libata] Kconfig: Elaborate that SFF is meant for legacy and PATA stuff MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Building Linux for an ASUS Eee PC 701 4G with ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66 ata2.00: 7815024 sectors, multi 0: LBA ata2.00: configured for UDMA/66 scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.72 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg0 type 0 I followed the advice to not use the deprecated old PATA subsystem ATA/ATAPI/MFM/RLL support (DEPRECATED) ---> and use the ATA subsystem instead. Serial ATA and Parallel ATA drivers ---> Unfortunately I needed several tries to find out, that I needed the SFF menu I had not selected before because I had never heard that term before. I think it would have helped me, to have PATA or legacy IDE in that item’s name. Signed-off-by: Paul Menzel Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 2be8ef1d309..27cecd313e7 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -115,7 +115,7 @@ config SATA_SIL24 If unsure, say N. config ATA_SFF - bool "ATA SFF support" + bool "ATA SFF support (for legacy IDE and PATA)" default y help This option adds support for ATA controllers with SFF -- cgit v1.2.3-70-g09d2 From 7f321c26c04807834fef4c524d2b21573423fc74 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 15 Aug 2012 21:31:45 +0200 Subject: PM / Runtime: Fix rpm_resume() return value for power.no_callbacks set For devices whose power.no_callbacks flag is set, rpm_resume() should return 1 if the device's parent is already active, so that the callers of pm_runtime_get() don't think that they have to wait for the device to resume (asynchronously) in that case (the core won't queue up an asynchronous resume in that case, so there's nothing to wait for anyway). Modify the code accordingly (and make sure that an idle notification will be queued up on success, even if 1 is to be returned). Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Cc: stable@vger.kernel.org --- drivers/base/power/runtime.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 59894873a3b..9891a855920 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -584,6 +584,7 @@ static int rpm_resume(struct device *dev, int rpmflags) || dev->parent->power.runtime_status == RPM_ACTIVE) { atomic_inc(&dev->parent->power.child_count); spin_unlock(&dev->parent->power.lock); + retval = 1; goto no_callback; /* Assume success. */ } spin_unlock(&dev->parent->power.lock); @@ -664,7 +665,7 @@ static int rpm_resume(struct device *dev, int rpmflags) } wake_up_all(&dev->power.wait_queue); - if (!retval) + if (retval >= 0) rpm_idle(dev, RPM_ASYNC); out: -- cgit v1.2.3-70-g09d2 From 58a34de7b1a920d287d17d2ca08bc9aaf7e6d35b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 15 Aug 2012 21:31:55 +0200 Subject: PM / Runtime: Clear power.deferred_resume on success in rpm_suspend() The power.deferred_resume can only be set if the runtime PM status of device is RPM_SUSPENDING and it should be cleared after its status has been changed, regardless of whether or not the runtime suspend has been successful. However, it only is cleared on suspend failure, while it may remain set on successful suspend and is happily leaked to rpm_resume() executed in that case. That shouldn't happen, so if power.deferred_resume is set in rpm_suspend() after the status has been changed to RPM_SUSPENDED, clear it before calling rpm_resume(). Then, it doesn't need to be cleared before changing the status to RPM_SUSPENDING any more, because it's always cleared after the status has been changed to either RPM_SUSPENDED (on success) or RPM_ACTIVE (on failure). Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Cc: stable@vger.kernel.org --- drivers/base/power/runtime.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 9891a855920..b6e9d9b7982 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -388,7 +388,6 @@ static int rpm_suspend(struct device *dev, int rpmflags) goto repeat; } - dev->power.deferred_resume = false; if (dev->power.no_callbacks) goto no_callback; /* Assume success. */ @@ -440,6 +439,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) wake_up_all(&dev->power.wait_queue); if (dev->power.deferred_resume) { + dev->power.deferred_resume = false; rpm_resume(dev, 0); retval = -EAGAIN; goto out; -- cgit v1.2.3-70-g09d2 From 55d7ec4520e86d735d178c15d7df33d507bd43c6 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 15 Aug 2012 21:32:04 +0200 Subject: PM / Runtime: Check device PM QoS setting before "no callbacks" check If __dev_pm_qos_read_value(dev) returns a negative value, rpm_suspend() should return -EPERM for dev even if its power.no_callbacks flag is set. For this to happen, the device's power.no_callbacks flag has to be checked after the PM QoS check, so move the PM QoS check to rpm_check_suspend_allowed() (this will make it cover idle notifications as well as runtime suspend too). Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Cc: stable@vger.kernel.org --- drivers/base/power/runtime.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index b6e9d9b7982..7d9c1cb1c39 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -147,6 +147,8 @@ static int rpm_check_suspend_allowed(struct device *dev) || (dev->power.request_pending && dev->power.request == RPM_REQ_RESUME)) retval = -EAGAIN; + else if (__dev_pm_qos_read_value(dev) < 0) + retval = -EPERM; else if (dev->power.runtime_status == RPM_SUSPENDED) retval = 1; @@ -402,12 +404,6 @@ static int rpm_suspend(struct device *dev, int rpmflags) goto out; } - if (__dev_pm_qos_read_value(dev) < 0) { - /* Negative PM QoS constraint means "never suspend". */ - retval = -EPERM; - goto out; - } - __update_runtime_status(dev, RPM_SUSPENDING); if (dev->pm_domain) -- cgit v1.2.3-70-g09d2 From 04d0f1b84927169cdaa4e3a24da768a9fd9aca6f Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 17 Aug 2012 13:36:59 -0400 Subject: [libata] new quirk, lift bridge limits for Buffalo DriveStation Quattro Michael Eitelwein writes: I have an external SATA drive that was slowed down by bridge limits. I found a solution in a thread on this list posted in 2008: It introduces whitelist entries in libata-core.c for devices with well working bridges (e.g. email on Fri, 31 Oct 2008 01:45:27 -0400). I added my device to this whitelist in a custom built kernel and it works fine for weeks now. How can I have this device added on the whitelist within the official kernel? Is this whitelist mechanism still supported or is there a smarter way to achieve whitelisting? I added the following whitelist entry for my Buffalo DriveStation Quattro "BUFFALO HD-QSU2/R5": /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, }, Reported-by: Michael Eitelwein Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index fadd5866d40..5eee1c1537d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4128,6 +4128,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, }, /* Devices which aren't very happy with higher link speeds */ { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, -- cgit v1.2.3-70-g09d2 From 63c6ba4352009a5f85b32307c001abeb5baebd28 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 15 Aug 2012 22:10:50 +0200 Subject: cpuidle: coupled: fix sleeping while atomic in cpu notifier The cpu hotplug notifier gets called in both atomic and non-atomic contexts, it is not always safe to lock a mutex. Filter out all events except the six necessary ones, which are all sleepable, before taking the mutex. Signed-off-by: Colin Cross Reviewed-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/coupled.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/cpuidle/coupled.c b/drivers/cpuidle/coupled.c index 2c9bf269223..c24dda03c14 100644 --- a/drivers/cpuidle/coupled.c +++ b/drivers/cpuidle/coupled.c @@ -678,6 +678,18 @@ static int cpuidle_coupled_cpu_notify(struct notifier_block *nb, int cpu = (unsigned long)hcpu; struct cpuidle_device *dev; + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_UP_PREPARE: + case CPU_DOWN_PREPARE: + case CPU_ONLINE: + case CPU_DEAD: + case CPU_UP_CANCELED: + case CPU_DOWN_FAILED: + break; + default: + return NOTIFY_OK; + } + mutex_lock(&cpuidle_lock); dev = per_cpu(cpuidle_devices, cpu); -- cgit v1.2.3-70-g09d2 From 5fbbb90dfdedb9a258550e4e5debd3013266372e Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Wed, 15 Aug 2012 22:11:00 +0200 Subject: cpuidle: Prevent null pointer dereference in cpuidle_coupled_cpu_notify When a kernel is built to support multiple hardware types it's possible that CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is set but the hardware the kernel is run on doesn't support cpuidle and therefore doesn't load a driver for it. In this case, when the system is shut down, cpuidle_coupled_cpu_notify() gets called with cpuidle_devices set to NULL. There are quite possibly other circumstances where this situation can also occur and we should check for it. Signed-off-by: Jon Medhurst Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/coupled.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpuidle/coupled.c b/drivers/cpuidle/coupled.c index c24dda03c14..3265844839b 100644 --- a/drivers/cpuidle/coupled.c +++ b/drivers/cpuidle/coupled.c @@ -693,7 +693,7 @@ static int cpuidle_coupled_cpu_notify(struct notifier_block *nb, mutex_lock(&cpuidle_lock); dev = per_cpu(cpuidle_devices, cpu); - if (!dev->coupled) + if (!dev || !dev->coupled) goto out; switch (action & ~CPU_TASKS_FROZEN) { -- cgit v1.2.3-70-g09d2 From 3735d524da64b70b41c764359da36f88aded3610 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 16 Aug 2012 22:06:55 +0200 Subject: intel_idle: Check cpu_idle_get_driver() for NULL before dereferencing it. If the machine is booted without any cpu_idle driver set (b/c disable_cpuidle() has been called) we should follow other users of cpu_idle API and check the return value for NULL before using it. Reported-and-tested-by: Mark van Dijk Suggested-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Rafael J. Wysocki --- drivers/idle/intel_idle.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index f559088869f..e8726177d10 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -606,8 +606,9 @@ static int __init intel_idle_init(void) intel_idle_cpuidle_driver_init(); retval = cpuidle_register_driver(&intel_idle_driver); if (retval) { + struct cpuidle_driver *drv = cpuidle_get_driver(); printk(KERN_DEBUG PREFIX "intel_idle yielding to %s", - cpuidle_get_driver()->name); + drv ? drv->name : "none"); return retval; } -- cgit v1.2.3-70-g09d2 From 60916a9382e88fbf5e54fd36a3e658efd7ab7bed Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 Aug 2012 18:14:14 +0100 Subject: tracing/syscalls: Fix perf syscall tracing when syscall_nr == -1 syscall_get_nr can return -1 in the case that the task is not executing a system call. This patch fixes perf_syscall_{enter,exit} to check that the syscall number is valid before using it as an index into a bitmap. Link: http://lkml.kernel.org/r/1345137254-7377-1-git-send-email-will.deacon@arm.com Cc: Jason Baron Cc: Wade Farnsworth Cc: Frederic Weisbecker Signed-off-by: Will Deacon Signed-off-by: Steven Rostedt --- kernel/trace/trace_syscalls.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c index 60e4d787567..6b245f64c8d 100644 --- a/kernel/trace/trace_syscalls.c +++ b/kernel/trace/trace_syscalls.c @@ -506,6 +506,8 @@ static void perf_syscall_enter(void *ignore, struct pt_regs *regs, long id) int size; syscall_nr = syscall_get_nr(current, regs); + if (syscall_nr < 0) + return; if (!test_bit(syscall_nr, enabled_perf_enter_syscalls)) return; @@ -580,6 +582,8 @@ static void perf_syscall_exit(void *ignore, struct pt_regs *regs, long ret) int size; syscall_nr = syscall_get_nr(current, regs); + if (syscall_nr < 0) + return; if (!test_bit(syscall_nr, enabled_perf_exit_syscalls)) return; -- cgit v1.2.3-70-g09d2 From 7e30ed6bdd91ae73c34fc37b57fcccc8640641f9 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 9 Aug 2012 12:47:00 -0400 Subject: gmux: Add generic write32 function Move the special-cased backlight update function to a generic gmux_write32 function. Signed-off-by: Matthew Garrett Cc: Seth Forshee --- drivers/platform/x86/apple-gmux.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 905fa01ac8d..c9db50729f6 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -75,6 +75,18 @@ static inline u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) return inl(gmux_data->iostart + port); } +static inline u32 gmux_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + int i; + u8 tmpval; + + for (i = 0; i < 4; i++) { + tmpval = (val >> (i * 8)) & 0xff; + outb(tmpval, port + i); + } +} + static int gmux_get_brightness(struct backlight_device *bd) { struct apple_gmux_data *gmux_data = bl_get_data(bd); @@ -90,16 +102,7 @@ static int gmux_update_status(struct backlight_device *bd) if (bd->props.state & BL_CORE_SUSPENDED) return 0; - /* - * Older gmux versions require writing out lower bytes first then - * setting the upper byte to 0 to flush the values. Newer versions - * accept a single u32 write, but the old method also works, so we - * just use the old method for all gmux versions. - */ - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS, brightness); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 1, brightness >> 8); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 2, brightness >> 16); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 3, 0); + gmux_write32(gmux_data, GMUX_PORT_BRIGHTNESS, brightness); return 0; } -- cgit v1.2.3-70-g09d2 From 96ff705638e3d61b1e45a047c0f9f3bb622fa32f Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 9 Aug 2012 13:45:01 -0400 Subject: apple_gmux: Add support for newer hardware New gmux devices have a different method for accessing the registers. Update the driver to cope. Incorporates feedback from Bernhard Froemel. Signed-off-by: Matthew Garrett Cc: Bernhard Froemel Cc: Seth Forshee --- drivers/platform/x86/apple-gmux.c | 179 +++++++++++++++++++++++++++++++++++--- 1 file changed, 165 insertions(+), 14 deletions(-) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index c9db50729f6..0d140e1879e 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -18,12 +18,15 @@ #include #include #include +#include #include #include struct apple_gmux_data { unsigned long iostart; unsigned long iolen; + bool indexed; + struct mutex index_lock; struct backlight_device *bdev; }; @@ -45,6 +48,9 @@ struct apple_gmux_data { #define GMUX_PORT_DISCRETE_POWER 0x50 #define GMUX_PORT_MAX_BRIGHTNESS 0x70 #define GMUX_PORT_BRIGHTNESS 0x74 +#define GMUX_PORT_VALUE 0xc2 +#define GMUX_PORT_READ 0xd0 +#define GMUX_PORT_WRITE 0xd4 #define GMUX_MIN_IO_LEN (GMUX_PORT_BRIGHTNESS + 4) @@ -59,24 +65,24 @@ struct apple_gmux_data { #define GMUX_BRIGHTNESS_MASK 0x00ffffff #define GMUX_MAX_BRIGHTNESS GMUX_BRIGHTNESS_MASK -static inline u8 gmux_read8(struct apple_gmux_data *gmux_data, int port) +static u8 gmux_pio_read8(struct apple_gmux_data *gmux_data, int port) { return inb(gmux_data->iostart + port); } -static inline void gmux_write8(struct apple_gmux_data *gmux_data, int port, +static void gmux_pio_write8(struct apple_gmux_data *gmux_data, int port, u8 val) { outb(val, gmux_data->iostart + port); } -static inline u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) +static u32 gmux_pio_read32(struct apple_gmux_data *gmux_data, int port) { return inl(gmux_data->iostart + port); } -static inline u32 gmux_write32(struct apple_gmux_data *gmux_data, int port, - u32 val) +static void gmux_pio_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) { int i; u8 tmpval; @@ -87,6 +93,144 @@ static inline u32 gmux_write32(struct apple_gmux_data *gmux_data, int port, } } +static int gmux_index_wait_ready(struct apple_gmux_data *gmux_data) +{ + int i = 200; + u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + + while (i && (gwr & 0x01)) { + inb(gmux_data->iostart + GMUX_PORT_READ); + gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + return !!i; +} + +static int gmux_index_wait_complete(struct apple_gmux_data *gmux_data) +{ + int i = 200; + u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + + while (i && !(gwr & 0x01)) { + gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + if (gwr & 0x01) + inb(gmux_data->iostart + GMUX_PORT_READ); + + return !!i; +} + +static u8 gmux_index_read8(struct apple_gmux_data *gmux_data, int port) +{ + u8 val; + + mutex_lock(&gmux_data->index_lock); + outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); + gmux_index_wait_ready(gmux_data); + val = inb(gmux_data->iostart + GMUX_PORT_VALUE); + mutex_unlock(&gmux_data->index_lock); + + return val; +} + +static void gmux_index_write8(struct apple_gmux_data *gmux_data, int port, + u8 val) +{ + mutex_lock(&gmux_data->index_lock); + outb(val, gmux_data->iostart + GMUX_PORT_VALUE); + gmux_index_wait_ready(gmux_data); + outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE); + gmux_index_wait_complete(gmux_data); + mutex_unlock(&gmux_data->index_lock); +} + +static u32 gmux_index_read32(struct apple_gmux_data *gmux_data, int port) +{ + u32 val; + + mutex_lock(&gmux_data->index_lock); + outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); + gmux_index_wait_ready(gmux_data); + val = inl(gmux_data->iostart + GMUX_PORT_VALUE); + mutex_unlock(&gmux_data->index_lock); + + return val; +} + +static void gmux_index_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + int i; + u8 tmpval; + + mutex_lock(&gmux_data->index_lock); + + for (i = 0; i < 4; i++) { + tmpval = (val >> (i * 8)) & 0xff; + outb(tmpval, gmux_data->iostart + GMUX_PORT_VALUE + i); + } + + gmux_index_wait_ready(gmux_data); + outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE); + gmux_index_wait_complete(gmux_data); + mutex_unlock(&gmux_data->index_lock); +} + +static u8 gmux_read8(struct apple_gmux_data *gmux_data, int port) +{ + if (gmux_data->indexed) + return gmux_index_read8(gmux_data, port); + else + return gmux_pio_read8(gmux_data, port); +} + +static void gmux_write8(struct apple_gmux_data *gmux_data, int port, u8 val) +{ + if (gmux_data->indexed) + gmux_index_write8(gmux_data, port, val); + else + gmux_pio_write8(gmux_data, port, val); +} + +static u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) +{ + if (gmux_data->indexed) + return gmux_index_read32(gmux_data, port); + else + return gmux_pio_read32(gmux_data, port); +} + +static void gmux_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + if (gmux_data->indexed) + gmux_index_write32(gmux_data, port, val); + else + gmux_pio_write32(gmux_data, port, val); +} + +static bool gmux_is_indexed(struct apple_gmux_data *gmux_data) +{ + u16 val; + + outb(0xaa, gmux_data->iostart + 0xcc); + outb(0x55, gmux_data->iostart + 0xcd); + outb(0x00, gmux_data->iostart + 0xce); + + val = inb(gmux_data->iostart + 0xcc) | + (inb(gmux_data->iostart + 0xcd) << 8); + + if (val == 0x55aa) + return true; + + return false; +} + static int gmux_get_brightness(struct backlight_device *bd) { struct apple_gmux_data *gmux_data = bl_get_data(bd); @@ -150,22 +294,29 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, } /* - * On some machines the gmux is in ACPI even thought the machine - * doesn't really have a gmux. Check for invalid version information - * to detect this. + * Invalid version information may indicate either that the gmux + * device isn't present or that it's a new one that uses indexed + * io */ + ver_major = gmux_read8(gmux_data, GMUX_PORT_VERSION_MAJOR); ver_minor = gmux_read8(gmux_data, GMUX_PORT_VERSION_MINOR); ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE); if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) { - pr_info("gmux device not present\n"); - ret = -ENODEV; - goto err_release; + if (gmux_is_indexed(gmux_data)) { + mutex_init(&gmux_data->index_lock); + gmux_data->indexed = true; + } else { + pr_info("gmux device not present\n"); + ret = -ENODEV; + goto err_release; + } + pr_info("Found indexed gmux\n"); + } else { + pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor, + ver_release); } - pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor, - ver_release); - memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_PLATFORM; props.max_brightness = gmux_read32(gmux_data, GMUX_PORT_MAX_BRIGHTNESS); -- cgit v1.2.3-70-g09d2 From 9f6f955ae4994dd4ad5513a0d959468763a45fa5 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 17 Aug 2012 16:57:20 -0400 Subject: apple_gmux: Fix ACPI video unregister We were only calling acpi_video_unregister() if ACPI video support was built in, not if it was a module. Signed-off-by: Matthew Garrett --- drivers/platform/x86/apple-gmux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 0d140e1879e..85e1bfbd112 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -348,7 +348,7 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, * Disable the other backlight choices. */ acpi_video_dmi_promote_vendor(); -#ifdef CONFIG_ACPI_VIDEO +#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE) acpi_video_unregister(); #endif apple_bl_unregister(); @@ -371,7 +371,7 @@ static void __devexit gmux_remove(struct pnp_dev *pnp) kfree(gmux_data); acpi_video_dmi_demote_vendor(); -#ifdef CONFIG_ACPI_VIDEO +#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE) acpi_video_register(); #endif apple_bl_register(); -- cgit v1.2.3-70-g09d2 From a50bd128f28cf81c1250874fc53728e113f12957 Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 26 Jul 2012 17:13:31 +0800 Subject: asus-wmi: record wlan status while controlled by userapp MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the user bit is set, that mean BIOS can't set and record the wlan status, it will report the value read from id ASUS_WMI_DEVID_WLAN_LED (0x00010012) while we query the wlan status by id ASUS_WMI_DEVID_WLAN (0x00010011) through WMI. So, we have to record wlan status in id ASUS_WMI_DEVID_WLAN_LED (0x00010012) while setting the wlan status through WMI. This is also the behavior that windows app will do. Quote from ASUS application engineer === When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return (1) 0x00050001 (On) (2) 0x00050000 (Off) (3) 0x00030001 (On) (4) 0x00030000 (Off) (5) 0x00000002 (Unknown) (1), (2) means that the model has hardware GPIO for WLAN, you can call WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off. (3), (4) means that the model doesn’t have hardware GPIO, you need to use API or driver library to turn WLAN on/off, and call WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status. After you set WLAN LED status, you can see the WLAN status is changed with WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly (ex: Windows), you can use it for synchronization. (5) means that the model doesn’t have WLAN device. WLAN is the ONLY special case with upper rule. For other device, like Bluetooth, you just need use WMIMethod(DSTS, 0x00010013) to get, and WMIMethod(DEVS, 0x00010013, 1 or 0) to set. === Signed-off-by: AceLan Kao Signed-off-by: Matthew Garrett --- drivers/platform/x86/asus-wmi.c | 21 ++++++++++++++++++++- drivers/platform/x86/asus-wmi.h | 1 + 2 files changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index c7a36f6b058..2eb9fe8e8ef 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -101,6 +101,7 @@ MODULE_LICENSE("GPL"); #define ASUS_WMI_DEVID_WIRELESS_LED 0x00010002 #define ASUS_WMI_DEVID_CWAP 0x00010003 #define ASUS_WMI_DEVID_WLAN 0x00010011 +#define ASUS_WMI_DEVID_WLAN_LED 0x00010012 #define ASUS_WMI_DEVID_BLUETOOTH 0x00010013 #define ASUS_WMI_DEVID_GPS 0x00010015 #define ASUS_WMI_DEVID_WIMAX 0x00010017 @@ -731,8 +732,21 @@ static int asus_rfkill_set(void *data, bool blocked) { struct asus_rfkill *priv = data; u32 ctrl_param = !blocked; + u32 dev_id = priv->dev_id; - return asus_wmi_set_devstate(priv->dev_id, ctrl_param, NULL); + /* + * If the user bit is set, BIOS can't set and record the wlan status, + * it will report the value read from id ASUS_WMI_DEVID_WLAN_LED + * while we query the wlan status through WMI(ASUS_WMI_DEVID_WLAN). + * So, we have to record wlan status in id ASUS_WMI_DEVID_WLAN_LED + * while setting the wlan status through WMI. + * This is also the behavior that windows app will do. + */ + if ((dev_id == ASUS_WMI_DEVID_WLAN) && + priv->asus->driver->wlan_ctrl_by_user) + dev_id = ASUS_WMI_DEVID_WLAN_LED; + + return asus_wmi_set_devstate(dev_id, ctrl_param, NULL); } static void asus_rfkill_query(struct rfkill *rfkill, void *data) @@ -1653,6 +1667,7 @@ static int asus_wmi_add(struct platform_device *pdev) struct asus_wmi *asus; acpi_status status; int err; + u32 result; asus = kzalloc(sizeof(struct asus_wmi), GFP_KERNEL); if (!asus) @@ -1711,6 +1726,10 @@ static int asus_wmi_add(struct platform_device *pdev) if (err) goto fail_debugfs; + asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_WLAN, &result); + if (result & (ASUS_WMI_DSTS_PRESENCE_BIT | ASUS_WMI_DSTS_USER_BIT)) + asus->driver->wlan_ctrl_by_user = 1; + return 0; fail_debugfs: diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h index 9c1da8b81be..4c9bd38bb0a 100644 --- a/drivers/platform/x86/asus-wmi.h +++ b/drivers/platform/x86/asus-wmi.h @@ -46,6 +46,7 @@ struct quirk_entry { struct asus_wmi_driver { int brightness; int panel_power; + int wlan_ctrl_by_user; const char *name; struct module *owner; -- cgit v1.2.3-70-g09d2 From f94f0f103c440f1dbe5d89a28c92fd1a9bdf7012 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Thu, 2 Aug 2012 12:15:14 -0500 Subject: apple-gmux: Fix kconfig dependencies Fix the dependencies of apple-gmux to prevent it from being built-in when one or more of its dependencies is built as a module. Otherwise it can fail to build due to missing symbols. v2: Add dependency on ACPI to fix build failure when ACPI=n Reported-by: Arun Raghavan Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/platform/x86/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 2a262f5c5c0..637074d8979 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -758,8 +758,11 @@ config SAMSUNG_Q10 config APPLE_GMUX tristate "Apple Gmux Driver" + depends on ACPI depends on PNP - select BACKLIGHT_CLASS_DEVICE + depends on BACKLIGHT_CLASS_DEVICE + depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE + depends on ACPI_VIDEO=n || ACPI_VIDEO ---help--- This driver provides support for the gmux device found on many Apple laptops, which controls the display mux for the hybrid -- cgit v1.2.3-70-g09d2 From 76b487dd5187a4d7cc6eccd452f65467a8c7768b Mon Sep 17 00:00:00 2001 From: Andreas Heider Date: Fri, 17 Aug 2012 11:17:04 -0500 Subject: apple-gmux: Add display mux support Add support for the gmux display muxing functionality and register a mux handler with vga_switcheroo. Signed-off-by: Andreas Heider Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/platform/x86/apple-gmux.c | 224 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 224 insertions(+) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 85e1bfbd112..dfb1a92ce94 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -2,6 +2,7 @@ * Gmux driver for Apple laptops * * Copyright (C) Canonical Ltd. + * Copyright (C) 2010-2012 Andreas Heider * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,6 +20,8 @@ #include #include #include +#include +#include #include #include @@ -29,8 +32,17 @@ struct apple_gmux_data { struct mutex index_lock; struct backlight_device *bdev; + + /* switcheroo data */ + acpi_handle dhandle; + int gpe; + enum vga_switcheroo_client_id resume_client_id; + enum vga_switcheroo_state power_state; + struct completion powerchange_done; }; +static struct apple_gmux_data *apple_gmux_data; + /* * gmux port offsets. Many of these are not yet used, but may be in the * future, and it's useful to have them documented here anyhow. @@ -257,6 +269,146 @@ static const struct backlight_ops gmux_bl_ops = { .update_status = gmux_update_status, }; +static int gmux_switchto(enum vga_switcheroo_client_id id) +{ + if (id == VGA_SWITCHEROO_IGD) { + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 1); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DISPLAY, 2); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 2); + } else { + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 2); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DISPLAY, 3); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 3); + } + + return 0; +} + +static int gmux_set_discrete_state(struct apple_gmux_data *gmux_data, + enum vga_switcheroo_state state) +{ + INIT_COMPLETION(gmux_data->powerchange_done); + + if (state == VGA_SWITCHEROO_ON) { + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 3); + pr_debug("Discrete card powered up\n"); + } else { + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 0); + pr_debug("Discrete card powered down\n"); + } + + gmux_data->power_state = state; + + if (gmux_data->gpe >= 0 && + !wait_for_completion_interruptible_timeout(&gmux_data->powerchange_done, + msecs_to_jiffies(200))) + pr_warn("Timeout waiting for gmux switch to complete\n"); + + return 0; +} + +static int gmux_set_power_state(enum vga_switcheroo_client_id id, + enum vga_switcheroo_state state) +{ + if (id == VGA_SWITCHEROO_IGD) + return 0; + + return gmux_set_discrete_state(apple_gmux_data, state); +} + +static int gmux_get_client_id(struct pci_dev *pdev) +{ + /* + * Early Macbook Pros with switchable graphics use nvidia + * integrated graphics. Hardcode that the 9400M is integrated. + */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + return VGA_SWITCHEROO_IGD; + else if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && + pdev->device == 0x0863) + return VGA_SWITCHEROO_IGD; + else + return VGA_SWITCHEROO_DIS; +} + +static enum vga_switcheroo_client_id +gmux_active_client(struct apple_gmux_data *gmux_data) +{ + if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DISPLAY) == 2) + return VGA_SWITCHEROO_IGD; + + return VGA_SWITCHEROO_DIS; +} + +static struct vga_switcheroo_handler gmux_handler = { + .switchto = gmux_switchto, + .power_state = gmux_set_power_state, + .get_client_id = gmux_get_client_id, +}; + +static inline void gmux_disable_interrupts(struct apple_gmux_data *gmux_data) +{ + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE, + GMUX_INTERRUPT_DISABLE); +} + +static inline void gmux_enable_interrupts(struct apple_gmux_data *gmux_data) +{ + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE, + GMUX_INTERRUPT_ENABLE); +} + +static inline u8 gmux_interrupt_get_status(struct apple_gmux_data *gmux_data) +{ + return gmux_read8(gmux_data, GMUX_PORT_INTERRUPT_STATUS); +} + +static void gmux_clear_interrupts(struct apple_gmux_data *gmux_data) +{ + u8 status; + + /* to clear interrupts write back current status */ + status = gmux_interrupt_get_status(gmux_data); + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_STATUS, status); +} + +static void gmux_notify_handler(acpi_handle device, u32 value, void *context) +{ + u8 status; + struct pnp_dev *pnp = (struct pnp_dev *)context; + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + + status = gmux_interrupt_get_status(gmux_data); + gmux_disable_interrupts(gmux_data); + pr_debug("Notify handler called: status %d\n", status); + + gmux_clear_interrupts(gmux_data); + gmux_enable_interrupts(gmux_data); + + if (status & GMUX_INTERRUPT_STATUS_POWER) + complete(&gmux_data->powerchange_done); +} + +static int gmux_suspend(struct pnp_dev *pnp, pm_message_t state) +{ + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + gmux_data->resume_client_id = gmux_active_client(gmux_data); + gmux_disable_interrupts(gmux_data); + return 0; +} + +static int gmux_resume(struct pnp_dev *pnp) +{ + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + gmux_enable_interrupts(gmux_data); + gmux_switchto(gmux_data->resume_client_id); + if (gmux_data->power_state == VGA_SWITCHEROO_OFF) + gmux_set_discrete_state(gmux_data, gmux_data->power_state); + return 0; +} + static int __devinit gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) { @@ -266,6 +418,11 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, struct backlight_device *bdev; u8 ver_major, ver_minor, ver_release; int ret = -ENXIO; + acpi_status status; + unsigned long long gpe; + + if (apple_gmux_data) + return -EBUSY; gmux_data = kzalloc(sizeof(*gmux_data), GFP_KERNEL); if (!gmux_data) @@ -353,8 +510,62 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, #endif apple_bl_unregister(); + gmux_data->power_state = VGA_SWITCHEROO_ON; + + gmux_data->dhandle = DEVICE_ACPI_HANDLE(&pnp->dev); + if (!gmux_data->dhandle) { + pr_err("Cannot find acpi handle for pnp device %s\n", + dev_name(&pnp->dev)); + ret = -ENODEV; + goto err_notify; + } + + status = acpi_evaluate_integer(gmux_data->dhandle, "GMGP", NULL, &gpe); + if (ACPI_SUCCESS(status)) { + gmux_data->gpe = (int)gpe; + + status = acpi_install_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler, pnp); + if (ACPI_FAILURE(status)) { + pr_err("Install notify handler failed: %s\n", + acpi_format_exception(status)); + ret = -ENODEV; + goto err_notify; + } + + status = acpi_enable_gpe(NULL, gmux_data->gpe); + if (ACPI_FAILURE(status)) { + pr_err("Cannot enable gpe: %s\n", + acpi_format_exception(status)); + goto err_enable_gpe; + } + } else { + pr_warn("No GPE found for gmux\n"); + gmux_data->gpe = -1; + } + + if (vga_switcheroo_register_handler(&gmux_handler)) { + ret = -ENODEV; + goto err_register_handler; + } + + init_completion(&gmux_data->powerchange_done); + apple_gmux_data = gmux_data; + gmux_enable_interrupts(gmux_data); + return 0; +err_register_handler: + if (gmux_data->gpe >= 0) + acpi_disable_gpe(NULL, gmux_data->gpe); +err_enable_gpe: + if (gmux_data->gpe >= 0) + acpi_remove_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler); +err_notify: + backlight_device_unregister(bdev); err_release: release_region(gmux_data->iostart, gmux_data->iolen); err_free: @@ -366,8 +577,19 @@ static void __devexit gmux_remove(struct pnp_dev *pnp) { struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + vga_switcheroo_unregister_handler(); + gmux_disable_interrupts(gmux_data); + if (gmux_data->gpe >= 0) { + acpi_disable_gpe(NULL, gmux_data->gpe); + acpi_remove_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler); + } + backlight_device_unregister(gmux_data->bdev); + release_region(gmux_data->iostart, gmux_data->iolen); + apple_gmux_data = NULL; kfree(gmux_data); acpi_video_dmi_demote_vendor(); @@ -387,6 +609,8 @@ static struct pnp_driver gmux_pnp_driver = { .probe = gmux_probe, .remove = __devexit_p(gmux_remove), .id_table = gmux_device_ids, + .suspend = gmux_suspend, + .resume = gmux_resume }; static int __init apple_gmux_init(void) -- cgit v1.2.3-70-g09d2 From 36704c0c4c64f889d77158d497f6a7e596d1341c Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Fri, 17 Aug 2012 11:17:03 -0500 Subject: vga_switcheroo: Remove assumptions about registration/unregistration ordering vga_switcheroo assumes that the handler will be registered before the last client, otherwise switching will not be enabled. Likewise it's assumed that the handler will not be unregistered without at least one client also being unregistered, otherwise switching will remain enabled despite no longer having a handler. These assumptions cannot be enforced if the handler is in a separate driver from both clients, as with the gmux found in Apple laptops. Remove this assumption. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/gpu/vga/vga_switcheroo.c | 58 +++++++++++++++++++++++++--------------- 1 file changed, 36 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index 5b3c7d135dc..e10ba3755df 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -70,27 +70,12 @@ static struct vgasr_priv vgasr_priv = { .clients = LIST_HEAD_INIT(vgasr_priv.clients), }; -int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) -{ - mutex_lock(&vgasr_mutex); - if (vgasr_priv.handler) { - mutex_unlock(&vgasr_mutex); - return -EINVAL; - } - - vgasr_priv.handler = handler; - mutex_unlock(&vgasr_mutex); - return 0; -} -EXPORT_SYMBOL(vga_switcheroo_register_handler); - -void vga_switcheroo_unregister_handler(void) +static bool vga_switcheroo_ready(void) { - mutex_lock(&vgasr_mutex); - vgasr_priv.handler = NULL; - mutex_unlock(&vgasr_mutex); + /* we're ready if we get two clients + handler */ + return !vgasr_priv.active && + vgasr_priv.registered_clients == 2 && vgasr_priv.handler; } -EXPORT_SYMBOL(vga_switcheroo_unregister_handler); static void vga_switcheroo_enable(void) { @@ -113,6 +98,37 @@ static void vga_switcheroo_enable(void) vgasr_priv.active = true; } +int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) +{ + mutex_lock(&vgasr_mutex); + if (vgasr_priv.handler) { + mutex_unlock(&vgasr_mutex); + return -EINVAL; + } + + vgasr_priv.handler = handler; + if (vga_switcheroo_ready()) { + printk(KERN_INFO "vga_switcheroo: enabled\n"); + vga_switcheroo_enable(); + } + mutex_unlock(&vgasr_mutex); + return 0; +} +EXPORT_SYMBOL(vga_switcheroo_register_handler); + +void vga_switcheroo_unregister_handler(void) +{ + mutex_lock(&vgasr_mutex); + vgasr_priv.handler = NULL; + if (vgasr_priv.active) { + pr_info("vga_switcheroo: disabled\n"); + vga_switcheroo_debugfs_fini(&vgasr_priv); + vgasr_priv.active = false; + } + mutex_unlock(&vgasr_mutex); +} +EXPORT_SYMBOL(vga_switcheroo_unregister_handler); + static int register_client(struct pci_dev *pdev, const struct vga_switcheroo_client_ops *ops, int id, bool active) @@ -134,9 +150,7 @@ static int register_client(struct pci_dev *pdev, if (client_is_vga(client)) vgasr_priv.registered_clients++; - /* if we get two clients + handler */ - if (!vgasr_priv.active && - vgasr_priv.registered_clients == 2 && vgasr_priv.handler) { + if (vga_switcheroo_ready()) { printk(KERN_INFO "vga_switcheroo: enabled\n"); vga_switcheroo_enable(); } -- cgit v1.2.3-70-g09d2 From e99eac5e4ea3bd8671bb1cedad10c3fec90ec0de Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Fri, 17 Aug 2012 11:17:02 -0500 Subject: vga_switcheroo: Don't require handler init callback This callback is a no-op in nouveau, and the upcoming apple-gmux switcheroo support won't require it either. Rather than forcing drivers to stub it out, just make it optional and remove the callback from nouveau. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/gpu/drm/nouveau/nouveau_acpi.c | 6 ------ drivers/gpu/vga/vga_switcheroo.c | 3 ++- 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index fc841e87b34..26ebffebe71 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -211,11 +211,6 @@ static int nouveau_dsm_power_state(enum vga_switcheroo_client_id id, return nouveau_dsm_set_discrete_state(nouveau_dsm_priv.dhandle, state); } -static int nouveau_dsm_init(void) -{ - return 0; -} - static int nouveau_dsm_get_client_id(struct pci_dev *pdev) { /* easy option one - intel vendor ID means Integrated */ @@ -232,7 +227,6 @@ static int nouveau_dsm_get_client_id(struct pci_dev *pdev) static struct vga_switcheroo_handler nouveau_dsm_handler = { .switchto = nouveau_dsm_switchto, .power_state = nouveau_dsm_power_state, - .init = nouveau_dsm_init, .get_client_id = nouveau_dsm_get_client_id, }; diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index e10ba3755df..e25cf31faab 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -83,7 +83,8 @@ static void vga_switcheroo_enable(void) struct vga_switcheroo_client *client; /* call the handler to init */ - vgasr_priv.handler->init(); + if (vgasr_priv.handler->init) + vgasr_priv.handler->init(); list_for_each_entry(client, &vgasr_priv.clients, list) { if (client->id != -1) -- cgit v1.2.3-70-g09d2 From a2174ba29a3026d50aa0b59297821ea9cccd75cc Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Mon, 6 Aug 2012 09:48:58 +0800 Subject: dell-laptop: Fixed typo in touchpad LED quirk Fixed the typo introduced from the below commit 5f1e88f dell-laptop: Add 6 machines to touchpad led quirk Reported-by: Carlos Alberto Lopez Perez Signed-off-by: AceLan Kao Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 4e96e8c0b60..927c33af67e 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -211,7 +211,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5420", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5420"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -220,7 +220,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5520"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5520"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -229,7 +229,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5720", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5720"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5720"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -238,7 +238,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7420", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7420"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -247,7 +247,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7520"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7520"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -256,7 +256,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7720", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7720"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7720"), }, .driver_data = &quirk_dell_vostro_v130, }, -- cgit v1.2.3-70-g09d2 From a4f46bb9fa84642e356898ee44b670989622f8bb Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Mon, 6 Aug 2012 18:15:37 -0500 Subject: thinkpad-acpi: recognize latest V-Series using DMI_BIOS_VENDOR In the latest V-series bios DMI_PRODUCT_VERSION does not contain the string Lenovo or Thinkpad, but is set to the model number, this causes the thinkpad_acpi module to fail to load. Recognize laptop as Lenovo using DMI_BIOS_VENDOR instead, which is set to Lenovo. Test on V490u ============= == After the patch == [ 1350.295757] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 1350.295760] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 1350.295761] thinkpad_acpi: ThinkPad BIOS H7ET21WW (1.00 ), EC unknown [ 1350.295763] thinkpad_acpi: Lenovo LENOVO, model LV5DXXX [ 1350.296086] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 1350.296694] thinkpad_acpi: radio switch found; radios are enabled [ 1350.296703] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 1350.306466] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 1350.307082] Registered led device: tpacpi::thinklight [ 1350.307215] Registered led device: tpacpi::power [ 1350.307255] Registered led device: tpacpi::standby [ 1350.307294] Registered led device: tpacpi::thinkvantage [ 1350.308160] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 1350.308333] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 1350.312287] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14 == Before the patch == sudo modprobe thinkpad_acpi FATAL: Error inserting thinkpad_acpi (/lib/modules/3.2.0-27-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device Test on B485 ============= This patch was also test in a B485 where the thinkpad_acpi module does not have any issues loading. But, I tested it to make sure this patch does not break on already functioning models of Lenovo products. [13486.746359] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [13486.746364] thinkpad_acpi: http://ibm-acpi.sf.net/ [13486.746368] thinkpad_acpi: ThinkPad BIOS HJET15WW(1.01), EC unknown [13486.746373] thinkpad_acpi: Lenovo Lenovo LB485, model 814TR01 [13486.747300] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [13486.752435] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [13486.752883] Registered led device: tpacpi::thinklight [13486.752915] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [13486.753216] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [13486.757147] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15 Signed-off-by: Manoj Iyer Signed-off-by: Matthew Garrett --- drivers/platform/x86/thinkpad_acpi.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index f28f36ccdcf..80e37794931 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -8664,6 +8664,13 @@ static int __must_check __init get_thinkpad_model_data( tp->model_str = kstrdup(s, GFP_KERNEL); if (!tp->model_str) return -ENOMEM; + } else { + s = dmi_get_system_info(DMI_BIOS_VENDOR); + if (s && !(strnicmp(s, "Lenovo", 6))) { + tp->model_str = kstrdup(s, GFP_KERNEL); + if (!tp->model_str) + return -ENOMEM; + } } s = dmi_get_system_info(DMI_PRODUCT_NAME); -- cgit v1.2.3-70-g09d2 From ad20c73b05ea40cfdb42758506fb6b6befa3c9e5 Mon Sep 17 00:00:00 2001 From: Carlos Alberto Lopez Perez Date: Thu, 2 Aug 2012 19:50:21 +0200 Subject: classmate-laptop: always call input_sync() after input_report_switch() Due to commit cdda911c34006f1089f3c87b1a1f31ab3a4722f2 evdev only becomes readable when the buffer contains an EV_SYN/SYN_REPORT event. So in order to read the tablet sensor data as it happens we need to ensure that we always call input_sync() after input_report_switch() Signed-off-by: Carlos Alberto Lopez Perez Signed-off-by: Matthew Garrett --- drivers/platform/x86/classmate-laptop.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c index cd33add118c..c87ff16873f 100644 --- a/drivers/platform/x86/classmate-laptop.c +++ b/drivers/platform/x86/classmate-laptop.c @@ -725,8 +725,10 @@ static void cmpc_tablet_handler(struct acpi_device *dev, u32 event) struct input_dev *inputdev = dev_get_drvdata(&dev->dev); if (event == 0x81) { - if (ACPI_SUCCESS(cmpc_get_tablet(dev->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(dev->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } } } @@ -739,8 +741,10 @@ static void cmpc_tablet_idev_init(struct input_dev *inputdev) set_bit(SW_TABLET_MODE, inputdev->swbit); acpi = to_acpi_device(inputdev->dev.parent); - if (ACPI_SUCCESS(cmpc_get_tablet(acpi->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(acpi->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } } static int cmpc_tablet_add(struct acpi_device *acpi) @@ -760,8 +764,10 @@ static int cmpc_tablet_resume(struct device *dev) struct input_dev *inputdev = dev_get_drvdata(dev); unsigned long long val = 0; - if (ACPI_SUCCESS(cmpc_get_tablet(to_acpi_device(dev)->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(to_acpi_device(dev)->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } return 0; } #endif -- cgit v1.2.3-70-g09d2 From 939d5044b117302cabdd30833685d9f214e9bff6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 16 Aug 2012 13:08:23 +0100 Subject: ASoC: wm5102: Remove DRC2 It will be removed from future device revisions. Signed-off-by: Mark Brown --- sound/soc/codecs/wm5102.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index 496ce9a9d8b..e33d327396a 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -128,13 +128,9 @@ SOC_SINGLE_TLV("EQ4 B5 Volume", ARIZONA_EQ4_2, ARIZONA_EQ4_B5_GAIN_SHIFT, ARIZONA_MIXER_CONTROLS("DRC1L", ARIZONA_DRC1LMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DRC1R", ARIZONA_DRC1RMIX_INPUT_1_SOURCE), -ARIZONA_MIXER_CONTROLS("DRC2L", ARIZONA_DRC2LMIX_INPUT_1_SOURCE), -ARIZONA_MIXER_CONTROLS("DRC2R", ARIZONA_DRC2RMIX_INPUT_1_SOURCE), SND_SOC_BYTES_MASK("DRC1", ARIZONA_DRC1_CTRL1, 5, ARIZONA_DRC1R_ENA | ARIZONA_DRC1L_ENA), -SND_SOC_BYTES_MASK("DRC2", ARIZONA_DRC2_CTRL1, 5, - ARIZONA_DRC2R_ENA | ARIZONA_DRC2L_ENA), ARIZONA_MIXER_CONTROLS("LHPF1", ARIZONA_HPLP1MIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("LHPF2", ARIZONA_HPLP2MIX_INPUT_1_SOURCE), @@ -236,8 +232,6 @@ ARIZONA_MIXER_ENUMS(EQ4, ARIZONA_EQ4MIX_INPUT_1_SOURCE); ARIZONA_MIXER_ENUMS(DRC1L, ARIZONA_DRC1LMIX_INPUT_1_SOURCE); ARIZONA_MIXER_ENUMS(DRC1R, ARIZONA_DRC1RMIX_INPUT_1_SOURCE); -ARIZONA_MIXER_ENUMS(DRC2L, ARIZONA_DRC2LMIX_INPUT_1_SOURCE); -ARIZONA_MIXER_ENUMS(DRC2R, ARIZONA_DRC2RMIX_INPUT_1_SOURCE); ARIZONA_MIXER_ENUMS(LHPF1, ARIZONA_HPLP1MIX_INPUT_1_SOURCE); ARIZONA_MIXER_ENUMS(LHPF2, ARIZONA_HPLP2MIX_INPUT_1_SOURCE); @@ -349,10 +343,6 @@ SND_SOC_DAPM_PGA("DRC1L", ARIZONA_DRC1_CTRL1, ARIZONA_DRC1L_ENA_SHIFT, 0, NULL, 0), SND_SOC_DAPM_PGA("DRC1R", ARIZONA_DRC1_CTRL1, ARIZONA_DRC1R_ENA_SHIFT, 0, NULL, 0), -SND_SOC_DAPM_PGA("DRC2L", ARIZONA_DRC2_CTRL1, ARIZONA_DRC2L_ENA_SHIFT, 0, - NULL, 0), -SND_SOC_DAPM_PGA("DRC2R", ARIZONA_DRC2_CTRL1, ARIZONA_DRC2R_ENA_SHIFT, 0, - NULL, 0), SND_SOC_DAPM_PGA("LHPF1", ARIZONA_HPLPF1_1, ARIZONA_LHPF1_ENA_SHIFT, 0, NULL, 0), @@ -466,8 +456,6 @@ ARIZONA_MIXER_WIDGETS(EQ4, "EQ4"), ARIZONA_MIXER_WIDGETS(DRC1L, "DRC1L"), ARIZONA_MIXER_WIDGETS(DRC1R, "DRC1R"), -ARIZONA_MIXER_WIDGETS(DRC2L, "DRC2L"), -ARIZONA_MIXER_WIDGETS(DRC2R, "DRC2R"), ARIZONA_MIXER_WIDGETS(LHPF1, "LHPF1"), ARIZONA_MIXER_WIDGETS(LHPF2, "LHPF2"), @@ -553,8 +541,6 @@ SND_SOC_DAPM_OUTPUT("SPKDAT1R"), { name, "EQ4", "EQ4" }, \ { name, "DRC1L", "DRC1L" }, \ { name, "DRC1R", "DRC1R" }, \ - { name, "DRC2L", "DRC2L" }, \ - { name, "DRC2R", "DRC2R" }, \ { name, "LHPF1", "LHPF1" }, \ { name, "LHPF2", "LHPF2" }, \ { name, "LHPF3", "LHPF3" }, \ @@ -684,8 +670,6 @@ static const struct snd_soc_dapm_route wm5102_dapm_routes[] = { ARIZONA_MIXER_ROUTES("DRC1L", "DRC1L"), ARIZONA_MIXER_ROUTES("DRC1R", "DRC1R"), - ARIZONA_MIXER_ROUTES("DRC2L", "DRC2L"), - ARIZONA_MIXER_ROUTES("DRC2R", "DRC2R"), ARIZONA_MIXER_ROUTES("LHPF1", "LHPF1"), ARIZONA_MIXER_ROUTES("LHPF2", "LHPF2"), -- cgit v1.2.3-70-g09d2 From ccf795847a38235ee4a56a24129ce75147d6ba8f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 16 Aug 2012 22:36:04 +0100 Subject: ASoC: wm9712: Fix microphone source selection Currently the microphone input source is not selectable as while there is a DAPM widget it's not connected to anything so it won't be properly instantiated. Add something more correct for the input structure to get things going, even though it's not hooked into the rest of the routing map and so won't actually achieve anything except allowing the relevant register bits to be written. Reported-by: Christop Fritz Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm9712.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index f16fb361a4e..fd74b8843d3 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -272,7 +272,7 @@ SOC_DAPM_ENUM("Route", wm9712_enum[9]); /* Mic select */ static const struct snd_kcontrol_new wm9712_mic_src_controls = -SOC_DAPM_ENUM("Route", wm9712_enum[7]); +SOC_DAPM_ENUM("Mic Source Select", wm9712_enum[7]); /* diff select */ static const struct snd_kcontrol_new wm9712_diff_sel_controls = @@ -291,7 +291,9 @@ SND_SOC_DAPM_MUX("Left Capture Select", SND_SOC_NOPM, 0, 0, &wm9712_capture_selectl_controls), SND_SOC_DAPM_MUX("Right Capture Select", SND_SOC_NOPM, 0, 0, &wm9712_capture_selectr_controls), -SND_SOC_DAPM_MUX("Mic Select Source", SND_SOC_NOPM, 0, 0, +SND_SOC_DAPM_MUX("Left Mic Select Source", SND_SOC_NOPM, 0, 0, + &wm9712_mic_src_controls), +SND_SOC_DAPM_MUX("Right Mic Select Source", SND_SOC_NOPM, 0, 0, &wm9712_mic_src_controls), SND_SOC_DAPM_MUX("Differential Source", SND_SOC_NOPM, 0, 0, &wm9712_diff_sel_controls), @@ -319,6 +321,7 @@ SND_SOC_DAPM_PGA("Out 3 PGA", AC97_INT_PAGING, 5, 1, NULL, 0), SND_SOC_DAPM_PGA("Line PGA", AC97_INT_PAGING, 2, 1, NULL, 0), SND_SOC_DAPM_PGA("Phone PGA", AC97_INT_PAGING, 1, 1, NULL, 0), SND_SOC_DAPM_PGA("Mic PGA", AC97_INT_PAGING, 0, 1, NULL, 0), +SND_SOC_DAPM_PGA("Differential Mic", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_MICBIAS("Mic Bias", AC97_INT_PAGING, 10, 1), SND_SOC_DAPM_OUTPUT("MONOOUT"), SND_SOC_DAPM_OUTPUT("HPOUTL"), @@ -379,6 +382,18 @@ static const struct snd_soc_dapm_route wm9712_audio_map[] = { {"Mic PGA", NULL, "MIC1"}, {"Mic PGA", NULL, "MIC2"}, + /* microphones */ + {"Differential Mic", NULL, "MIC1"}, + {"Differential Mic", NULL, "MIC2"}, + {"Left Mic Select Source", "Mic 1", "MIC1"}, + {"Left Mic Select Source", "Mic 2", "MIC2"}, + {"Left Mic Select Source", "Stereo", "MIC1"}, + {"Left Mic Select Source", "Differential", "Differential Mic"}, + {"Right Mic Select Source", "Mic 1", "MIC1"}, + {"Right Mic Select Source", "Mic 2", "MIC2"}, + {"Right Mic Select Source", "Stereo", "MIC2"}, + {"Right Mic Select Source", "Differential", "Differential Mic"}, + /* left capture selector */ {"Left Capture Select", "Mic", "MIC1"}, {"Left Capture Select", "Speaker Mixer", "Speaker Mixer"}, -- cgit v1.2.3-70-g09d2 From 28c42c28309244d0b15d1b385e33429d59997679 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 31 Jul 2012 18:37:28 +0100 Subject: ASoC: wm9712: Fix inverted capture volume The capture volume increases with the register value so it shouldn't be flagged as inverted. Reported-by: Christoph Fritz Signed-off-by: Mark Brown --- sound/soc/codecs/wm9712.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index fd74b8843d3..c6d2076a796 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -148,7 +148,7 @@ SOC_SINGLE("Treble Volume", AC97_MASTER_TONE, 0, 15, 1), SOC_SINGLE("Capture ADC Switch", AC97_REC_GAIN, 15, 1, 1), SOC_ENUM("Capture Volume Steps", wm9712_enum[6]), -SOC_DOUBLE("Capture Volume", AC97_REC_GAIN, 8, 0, 63, 1), +SOC_DOUBLE("Capture Volume", AC97_REC_GAIN, 8, 0, 63, 0), SOC_SINGLE("Capture ZC Switch", AC97_REC_GAIN, 7, 1, 0), SOC_SINGLE_TLV("Mic 1 Volume", AC97_MIC, 8, 31, 1, main_tlv), -- cgit v1.2.3-70-g09d2 From 6887237cd7da904184dab2750504040c68f3a080 Mon Sep 17 00:00:00 2001 From: Michel JAOUEN Date: Fri, 17 Aug 2012 17:28:41 +0200 Subject: spi/pl022: fix spi-pl022 pm enable at probe amba drivers does not need to enable pm runtime at probe. amba_probe already enables pm runtime. This rids this warning in the ux500 boot log: ssp-pl022 ssp0: Unbalanced pm_runtime_enable! Signed-off-by: Michel JAOUEN Signed-off-by: Linus Walleij Signed-off-by: Mark Brown --- drivers/spi/spi-pl022.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index aab518ec2bb..6abbe23c39b 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2053,7 +2053,6 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n", adev->res.start, pl022->virtbase); - pm_runtime_enable(dev); pm_runtime_resume(dev); pl022->clk = clk_get(&adev->dev, NULL); -- cgit v1.2.3-70-g09d2 From a0c3652caa357b8f4e76efe401646ef298483cd9 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 16 Aug 2012 20:25:59 -0700 Subject: spi: spi-coldfire-qspi: Drop extra spi_master_put in device remove function The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which and results in device memory being freed. The subsequent call to spi_master_put is unnecessary and results in an access to free memory. Drop it. Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown --- drivers/spi/spi-coldfire-qspi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c index b2d4b9e4e01..1a30b47465c 100644 --- a/drivers/spi/spi-coldfire-qspi.c +++ b/drivers/spi/spi-coldfire-qspi.c @@ -533,7 +533,6 @@ static int __devexit mcfqspi_remove(struct platform_device *pdev) iounmap(mcfqspi->iobase); release_mem_region(res->start, resource_size(res)); spi_unregister_master(master); - spi_master_put(master); return 0; } -- cgit v1.2.3-70-g09d2 From af36107968f1b5faab0e4a0cc44fa4498c63f017 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 16 Aug 2012 20:26:00 -0700 Subject: spi/coldfire-qspi: Drop extra calls to spi_master_get in suspend/resume functions Suspend and resume functions call spi_master_get() without matching spi_master_put(). The extra references are unnecessary and cause subsequent module unload attempts to fail, so drop the calls. Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown --- drivers/spi/spi-coldfire-qspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c index 1a30b47465c..764bfee7592 100644 --- a/drivers/spi/spi-coldfire-qspi.c +++ b/drivers/spi/spi-coldfire-qspi.c @@ -540,7 +540,7 @@ static int __devexit mcfqspi_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int mcfqspi_suspend(struct device *dev) { - struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct spi_master *master = dev_get_drvdata(dev); struct mcfqspi *mcfqspi = spi_master_get_devdata(master); spi_master_suspend(master); @@ -552,7 +552,7 @@ static int mcfqspi_suspend(struct device *dev) static int mcfqspi_resume(struct device *dev) { - struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct spi_master *master = dev_get_drvdata(dev); struct mcfqspi *mcfqspi = spi_master_get_devdata(master); spi_master_resume(master); -- cgit v1.2.3-70-g09d2 From e0ee778528bbaad28a5c69d2e219269a3a096607 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Sat, 18 Aug 2012 09:51:42 +1000 Subject: md/raid10: fix problem with on-stack allocation of r10bio structure. A 'struct r10bio' has an array of per-copy information at the end. This array is declared with size [0] and r10bio_pool_alloc allocates enough extra space to store the per-copy information depending on the number of copies needed. So declaring a 'struct r10bio on the stack isn't going to work. It won't allocate enough space, and memory corruption will ensue. So in the two places where this is done, declare a sufficiently large structure and use that instead. The two call-sites of this bug were introduced in 3.4 and 3.5 so this is suitable for both those kernels. The patch will have to be modified for 3.4 as it only has one bug. Cc: stable@vger.kernel.org Reported-by: Ivan Vasilyev Tested-by: Ivan Vasilyev Signed-off-by: NeilBrown --- drivers/md/raid10.c | 30 +++++++++++++++++++----------- drivers/md/raid10.h | 2 +- 2 files changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index de5ed6fd880..1c2eb38f3c5 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -659,7 +659,11 @@ static int raid10_mergeable_bvec(struct request_queue *q, max = biovec->bv_len; if (mddev->merge_check_needed) { - struct r10bio r10_bio; + struct { + struct r10bio r10_bio; + struct r10dev devs[conf->copies]; + } on_stack; + struct r10bio *r10_bio = &on_stack.r10_bio; int s; if (conf->reshape_progress != MaxSector) { /* Cannot give any guidance during reshape */ @@ -667,18 +671,18 @@ static int raid10_mergeable_bvec(struct request_queue *q, return biovec->bv_len; return 0; } - r10_bio.sector = sector; - raid10_find_phys(conf, &r10_bio); + r10_bio->sector = sector; + raid10_find_phys(conf, r10_bio); rcu_read_lock(); for (s = 0; s < conf->copies; s++) { - int disk = r10_bio.devs[s].devnum; + int disk = r10_bio->devs[s].devnum; struct md_rdev *rdev = rcu_dereference( conf->mirrors[disk].rdev); if (rdev && !test_bit(Faulty, &rdev->flags)) { struct request_queue *q = bdev_get_queue(rdev->bdev); if (q->merge_bvec_fn) { - bvm->bi_sector = r10_bio.devs[s].addr + bvm->bi_sector = r10_bio->devs[s].addr + rdev->data_offset; bvm->bi_bdev = rdev->bdev; max = min(max, q->merge_bvec_fn( @@ -690,7 +694,7 @@ static int raid10_mergeable_bvec(struct request_queue *q, struct request_queue *q = bdev_get_queue(rdev->bdev); if (q->merge_bvec_fn) { - bvm->bi_sector = r10_bio.devs[s].addr + bvm->bi_sector = r10_bio->devs[s].addr + rdev->data_offset; bvm->bi_bdev = rdev->bdev; max = min(max, q->merge_bvec_fn( @@ -4414,14 +4418,18 @@ static int handle_reshape_read_error(struct mddev *mddev, { /* Use sync reads to get the blocks from somewhere else */ int sectors = r10_bio->sectors; - struct r10bio r10b; struct r10conf *conf = mddev->private; + struct { + struct r10bio r10_bio; + struct r10dev devs[conf->copies]; + } on_stack; + struct r10bio *r10b = &on_stack.r10_bio; int slot = 0; int idx = 0; struct bio_vec *bvec = r10_bio->master_bio->bi_io_vec; - r10b.sector = r10_bio->sector; - __raid10_find_phys(&conf->prev, &r10b); + r10b->sector = r10_bio->sector; + __raid10_find_phys(&conf->prev, r10b); while (sectors) { int s = sectors; @@ -4432,7 +4440,7 @@ static int handle_reshape_read_error(struct mddev *mddev, s = PAGE_SIZE >> 9; while (!success) { - int d = r10b.devs[slot].devnum; + int d = r10b->devs[slot].devnum; struct md_rdev *rdev = conf->mirrors[d].rdev; sector_t addr; if (rdev == NULL || @@ -4440,7 +4448,7 @@ static int handle_reshape_read_error(struct mddev *mddev, !test_bit(In_sync, &rdev->flags)) goto failed; - addr = r10b.devs[slot].addr + idx * PAGE_SIZE; + addr = r10b->devs[slot].addr + idx * PAGE_SIZE; success = sync_page_io(rdev, addr, s << 9, diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h index 007c2c68dd8..1054cf60234 100644 --- a/drivers/md/raid10.h +++ b/drivers/md/raid10.h @@ -110,7 +110,7 @@ struct r10bio { * We choose the number when they are allocated. * We sometimes need an extra bio to write to the replacement. */ - struct { + struct r10dev { struct bio *bio; union { struct bio *repl_bio; /* used for resync and -- cgit v1.2.3-70-g09d2 From 74f4cf290918f05b6489aa732dfb08aa5606b9d6 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 16 Aug 2012 17:06:41 -0700 Subject: target: Fix regression bug with handling of zero-length data CDBs This patch fixes a regression bug with the handling of zero-length data CDBs within transport_generic_new_cmd() code. The bug was introduced with the following commit as part of the single task conversion work: commit 4101f0a89d4eb13f04cb0344d59a335b862ca5f9 Author: Christoph Hellwig Date: Tue Apr 24 00:25:03 2012 -0400 target: always allocate a single task where the zero-length check for SCF_SCSI_DATA_SG_IO_CDB was incorrectly changed to SCF_SCSI_CONTROL_SG_IO_CDB because of the seperate comment in transport_generic_new_cmd() wrt to control CDBs zero-length handling introduced in: commit 91ec1d3535b2acf12c599045cc19ad9be3c6a47b Author: Nicholas Bellinger Date: Fri Jan 13 12:01:34 2012 -0800 target: Add workaround for zero-length control CDB handling So go ahead and change transport_generic_new_cmd() to handle control+data zero-length CDBs in the same manner for this special case. Tested with iscsi-target + loopback fabric port LUNs on 3.6-rc0 code. This patch will also need to be picked up for 3.5-stable. (hch: Add proper comment in transport_generic_new_cmd) Cc: Christoph Hellwig Cc: Roland Dreier Cc: Andy Grover Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index a7589ccdb6f..ea9a3d2e4f5 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2323,9 +2323,12 @@ int transport_generic_new_cmd(struct se_cmd *cmd) if (ret < 0) goto out_fail; } - - /* Workaround for handling zero-length control CDBs */ - if (!(cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) && !cmd->data_length) { + /* + * If this command doesn't have any payload and we don't have to call + * into the fabric for data transfers, go ahead and complete it right + * away. + */ + if (!cmd->data_length) { spin_lock_irq(&cmd->t_state_lock); cmd->t_state = TRANSPORT_COMPLETE; cmd->transport_state |= CMD_T_ACTIVE; -- cgit v1.2.3-70-g09d2 From d04dbd1c0ec17a13326c8f2279399c225836a79f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:26 -0700 Subject: USB: smsusb: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Mauro Carvalho Chehab CC: Michael Krufky CC: Paul Gortmaker CC: Doron Cohen Signed-off-by: Greg Kroah-Hartman --- drivers/media/dvb/siano/smsusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c index 664e460f247..aac622200e9 100644 --- a/drivers/media/dvb/siano/smsusb.c +++ b/drivers/media/dvb/siano/smsusb.c @@ -481,7 +481,7 @@ static int smsusb_resume(struct usb_interface *intf) return 0; } -static const struct usb_device_id smsusb_id_table[] __devinitconst = { +static const struct usb_device_id smsusb_id_table[] = { { USB_DEVICE(0x187f, 0x0010), .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, { USB_DEVICE(0x187f, 0x0100), -- cgit v1.2.3-70-g09d2 From ec063351684298e295dc9444d143ddfd6ab02df8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:27 -0700 Subject: USB: jl2005bcd: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Hans de Goede CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/gspca/jl2005bcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/jl2005bcd.c b/drivers/media/video/gspca/jl2005bcd.c index cf9d9fca5b8..234777116e5 100644 --- a/drivers/media/video/gspca/jl2005bcd.c +++ b/drivers/media/video/gspca/jl2005bcd.c @@ -512,7 +512,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0979, 0x0227)}, {} }; -- cgit v1.2.3-70-g09d2 From e694d518886c7afedcdd1732477832b2e32744e4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:27 -0700 Subject: USB: spca506: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Hans de Goede CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/gspca/spca506.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c index 969bb5a4cd9..bab01c86c31 100644 --- a/drivers/media/video/gspca/spca506.c +++ b/drivers/media/video/gspca/spca506.c @@ -579,7 +579,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x06e1, 0xa190)}, /*fixme: may be IntelPCCameraPro BRIDGE_SPCA505 {USB_DEVICE(0x0733, 0x0430)}, */ -- cgit v1.2.3-70-g09d2 From b9c4167cbbafddac3462134013bc15e63e4c53ef Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:28 -0700 Subject: USB: p54usb: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Christian Lamparter CC: "John W. Linville" Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/p54/p54usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 7f207b6e955..effb044a8a9 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -42,7 +42,7 @@ MODULE_FIRMWARE("isl3887usb"); * whenever you add a new device. */ -static struct usb_device_id p54u_table[] __devinitdata = { +static struct usb_device_id p54u_table[] = { /* Version 1 devices (pci chip + net2280) */ {USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */ {USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */ -- cgit v1.2.3-70-g09d2 From a3433179d0822ccfa8e80aa4d1d52843bd2dcc63 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:29 -0700 Subject: USB: rtl8187: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Herton Ronaldo Krzesinski CC: Hin-Tak Leung CC: Larry Finger CC: "John W. Linville" Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/rtl818x/rtl8187/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c index 71a30b02608..533024095c4 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c @@ -44,7 +44,7 @@ MODULE_AUTHOR("Larry Finger "); MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver"); MODULE_LICENSE("GPL"); -static struct usb_device_id rtl8187_table[] __devinitdata = { +static struct usb_device_id rtl8187_table[] = { /* Asus */ {USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187}, /* Belkin */ -- cgit v1.2.3-70-g09d2 From 4d088876f24887cd15a29db923f5f37db6a99f21 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:33 -0700 Subject: USB: vt6656: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Forest Bond CC: Marcos Paulo de Souza CC: "David S. Miller" CC: Jesper Juhl CC: Jiri Pirko Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/main_usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c index b06fd5b723f..d536756549e 100644 --- a/drivers/staging/vt6656/main_usb.c +++ b/drivers/staging/vt6656/main_usb.c @@ -189,7 +189,7 @@ DEVICE_PARAM(b80211hEnable, "802.11h mode"); // Static vars definitions // -static struct usb_device_id vt6656_table[] __devinitdata = { +static struct usb_device_id vt6656_table[] = { {USB_DEVICE(VNT_USB_VENDOR_ID, VNT_USB_PRODUCT_ID)}, {} }; -- cgit v1.2.3-70-g09d2 From 43a34695d9cd79c6659f09da6d3b0624f3dd169f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:37 -0700 Subject: USB: winbond: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Pavel Machek CC: Paul Gortmaker CC: "John W. Linville" CC: Eliad Peller CC: Devendra Naga Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/wbusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index ef360547ece..0ca857ac473 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -25,7 +25,7 @@ MODULE_DESCRIPTION("IS89C35 802.11bg WLAN USB Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION("0.1"); -static const struct usb_device_id wb35_table[] __devinitconst = { +static const struct usb_device_id wb35_table[] = { { USB_DEVICE(0x0416, 0x0035) }, { USB_DEVICE(0x18E8, 0x6201) }, { USB_DEVICE(0x18E8, 0x6206) }, -- cgit v1.2.3-70-g09d2 From 83957df21dd94655d2b026e0944a69ff37b83988 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:41 -0700 Subject: USB: emi62: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Paul Gortmaker CC: Andrew Morton CC: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/emi62.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index ff08015b230..ae794b90766 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -232,7 +232,7 @@ wraperr: return err; } -static const struct usb_device_id id_table[] __devinitconst = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) }, { } /* Terminating entry */ }; -- cgit v1.2.3-70-g09d2 From 99f347caa4568cb803862730b3b1f1942639523f Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Fri, 17 Aug 2012 21:43:43 +0200 Subject: USB: CDC ACM: Fix NULL pointer dereference If a device specifies zero endpoints in its interface descriptor, the kernel oopses in acm_probe(). Even though that's clearly an invalid descriptor, we should test wether we have all endpoints. This is especially bad as this oops can be triggered by just plugging a USB device in. Signed-off-by: Sven Schnelle Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 56d6bf66848..f763ed7ba91 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1104,7 +1104,8 @@ skip_normal_probe: } - if (data_interface->cur_altsetting->desc.bNumEndpoints < 2) + if (data_interface->cur_altsetting->desc.bNumEndpoints < 2 || + control_interface->cur_altsetting->desc.bNumEndpoints == 0) return -EINVAL; epctrl = &control_interface->cur_altsetting->endpoint[0].desc; -- cgit v1.2.3-70-g09d2 From b007a3ef958413736a9e2ba698ad6675a9d519ab Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 7 Aug 2012 12:27:24 +0100 Subject: i2c: nomadik: Add default configuration into the Nomadik I2C driver At this moment in time there is only one known configuration for the Nomadik I2C driver. By not holding that configuration in the driver adds some unnecessary overhead in platform code. The configuration has already been removed from platform code, this patch checks for any over-riding configurations. If there aren't any, the default is used. [LinusW says: "Right now this is causing boot regressions so we need it badly..."] Acked-by: srinidhi kasagar Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-nomadik.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 5e6f1eed4f8..61b00edacb0 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -350,10 +350,6 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) i2c_clk = clk_get_rate(dev->clk); - /* fallback to std. mode if machine has not provided it */ - if (dev->cfg.clk_freq == 0) - dev->cfg.clk_freq = 100000; - /* * The spec says, in case of std. mode the divider is * 2 whereas it is 3 for fast and fastplus mode of @@ -911,20 +907,32 @@ static const struct i2c_algorithm nmk_i2c_algo = { .functionality = nmk_i2c_functionality }; +static struct nmk_i2c_controller u8500_i2c = { + /* + * Slave data setup time; 250ns, 100ns, and 10ns, which + * is 14, 6 and 2 respectively for a 48Mhz i2c clock. + */ + .slsu = 0xe, + .tft = 1, /* Tx FIFO threshold */ + .rft = 8, /* Rx FIFO threshold */ + .clk_freq = 400000, /* fast mode operation */ + .timeout = 200, /* Slave response timeout(ms) */ + .sm = I2C_FREQ_MODE_FAST, +}; + static atomic_t adapter_id = ATOMIC_INIT(0); static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) { int ret = 0; - struct nmk_i2c_controller *pdata = - adev->dev.platform_data; + struct nmk_i2c_controller *pdata = adev->dev.platform_data; struct nmk_i2c_dev *dev; struct i2c_adapter *adap; - if (!pdata) { - dev_warn(&adev->dev, "no platform data\n"); - return -ENODEV; - } + if (!pdata) + /* No i2c configuration found, using the default. */ + pdata = &u8500_i2c; + dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL); if (!dev) { dev_err(&adev->dev, "cannot allocate memory\n"); -- cgit v1.2.3-70-g09d2 From 33ec5e818b7b0d0d02864a9586050c6f9a6a8b98 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 26 Jun 2012 18:45:32 -0700 Subject: I2C: OMAP: xfer: fix runtime PM get/put balance on error In omap_i2c_xfer(), ensure pm_runtime_put() is called, even on failure. Without this, after a failed xfer, the runtime PM usecount will have been incremented, but not decremented causing the usecount to never reach zero after a failure. This keeps the device always runtime PM enabled which keeps the enclosing power domain active, and prevents full-chip retention/off from happening during idle. Signed-off-by: Kevin Hilman Reviewed-by: Shubhrajyoti D Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 6849635b268..5d19a49803c 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -584,7 +584,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) r = pm_runtime_get_sync(dev->dev); if (IS_ERR_VALUE(r)) - return r; + goto out; r = omap_i2c_wait_for_bb(dev); if (r < 0) -- cgit v1.2.3-70-g09d2 From ab5625c30a0a3c8a8491b641c939575c84bc0dbb Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 9 Aug 2012 08:47:20 -0700 Subject: i2c: diolan-u2c: Fix master_xfer return code The master_xfer function returns 0 on success. It should return the number of successful transactions. Signed-off-by: Guenter Roeck Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-diolan-u2c.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c index aedb94f34bf..dae3ddfe761 100644 --- a/drivers/i2c/busses/i2c-diolan-u2c.c +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -405,6 +405,7 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, } } } + ret = num; abort: sret = diolan_i2c_stop(dev); if (sret < 0 && ret >= 0) -- cgit v1.2.3-70-g09d2 From 371e67c9e1a82b5fd8110b9a25e36bbc3a99e8c7 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Sat, 18 Aug 2012 17:49:58 +0530 Subject: i2c: tegra: protect suspend/resume callbacks with CONFIG_PM_SLEEP The CONFIG_PM doesn't actually enable any of the PM callbacks, it only allows to enable CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME. This means if CONFIG_PM is used to protect system sleep callbacks then it may end up unreferenced if only runtime PM is enabled. Hence protecting sleep callbacks with CONFIG_PM_SLEEP. Signed-off-by: Laxman Dewangan Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 66eb53fac20..9a08c57bc93 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -712,7 +712,7 @@ static int __devexit tegra_i2c_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int tegra_i2c_suspend(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); -- cgit v1.2.3-70-g09d2 From 312b90fbed0e07f61d2f060789440a83df6bba23 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Aug 2012 10:18:17 +0400 Subject: mqueue: lift mnt_want_write() outside ->i_mutex, clean up a bit the way it abuses ->d_fsdata still needs to be killed, but that's a separate story. Signed-off-by: Al Viro --- ipc/mqueue.c | 61 ++++++++++++++++++++++++++++-------------------------------- 1 file changed, 28 insertions(+), 33 deletions(-) diff --git a/ipc/mqueue.c b/ipc/mqueue.c index f8e54f5b908..9a08acc9e64 100644 --- a/ipc/mqueue.c +++ b/ipc/mqueue.c @@ -726,7 +726,6 @@ static struct file *do_create(struct ipc_namespace *ipc_ns, struct inode *dir, struct mq_attr *attr) { const struct cred *cred = current_cred(); - struct file *result; int ret; if (attr) { @@ -748,21 +747,11 @@ static struct file *do_create(struct ipc_namespace *ipc_ns, struct inode *dir, } mode &= ~current_umask(); - ret = mnt_want_write(path->mnt); - if (ret) - return ERR_PTR(ret); ret = vfs_create(dir, path->dentry, mode, true); path->dentry->d_fsdata = NULL; - if (!ret) - result = dentry_open(path, oflag, cred); - else - result = ERR_PTR(ret); - /* - * dentry_open() took a persistent mnt_want_write(), - * so we can now drop this one. - */ - mnt_drop_write(path->mnt); - return result; + if (ret) + return ERR_PTR(ret); + return dentry_open(path, oflag, cred); } /* Opens existing queue */ @@ -788,7 +777,9 @@ SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, umode_t, mode, struct mq_attr attr; int fd, error; struct ipc_namespace *ipc_ns = current->nsproxy->ipc_ns; - struct dentry *root = ipc_ns->mq_mnt->mnt_root; + struct vfsmount *mnt = ipc_ns->mq_mnt; + struct dentry *root = mnt->mnt_root; + int ro; if (u_attr && copy_from_user(&attr, u_attr, sizeof(struct mq_attr))) return -EFAULT; @@ -802,6 +793,7 @@ SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, umode_t, mode, if (fd < 0) goto out_putname; + ro = mnt_want_write(mnt); /* we'll drop it in any case */ error = 0; mutex_lock(&root->d_inode->i_mutex); path.dentry = lookup_one_len(name, root, strlen(name)); @@ -809,7 +801,7 @@ SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, umode_t, mode, error = PTR_ERR(path.dentry); goto out_putfd; } - path.mnt = mntget(ipc_ns->mq_mnt); + path.mnt = mntget(mnt); if (oflag & O_CREAT) { if (path.dentry->d_inode) { /* entry already exists */ @@ -820,6 +812,10 @@ SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, umode_t, mode, } filp = do_open(&path, oflag); } else { + if (ro) { + error = ro; + goto out; + } filp = do_create(ipc_ns, root->d_inode, &path, oflag, mode, u_attr ? &attr : NULL); @@ -845,6 +841,7 @@ out_putfd: fd = error; } mutex_unlock(&root->d_inode->i_mutex); + mnt_drop_write(mnt); out_putname: putname(name); return fd; @@ -857,40 +854,38 @@ SYSCALL_DEFINE1(mq_unlink, const char __user *, u_name) struct dentry *dentry; struct inode *inode = NULL; struct ipc_namespace *ipc_ns = current->nsproxy->ipc_ns; + struct vfsmount *mnt = ipc_ns->mq_mnt; name = getname(u_name); if (IS_ERR(name)) return PTR_ERR(name); - mutex_lock_nested(&ipc_ns->mq_mnt->mnt_root->d_inode->i_mutex, - I_MUTEX_PARENT); - dentry = lookup_one_len(name, ipc_ns->mq_mnt->mnt_root, strlen(name)); + err = mnt_want_write(mnt); + if (err) + goto out_name; + mutex_lock_nested(&mnt->mnt_root->d_inode->i_mutex, I_MUTEX_PARENT); + dentry = lookup_one_len(name, mnt->mnt_root, strlen(name)); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); goto out_unlock; } - if (!dentry->d_inode) { - err = -ENOENT; - goto out_err; - } - inode = dentry->d_inode; - if (inode) + if (!inode) { + err = -ENOENT; + } else { ihold(inode); - err = mnt_want_write(ipc_ns->mq_mnt); - if (err) - goto out_err; - err = vfs_unlink(dentry->d_parent->d_inode, dentry); - mnt_drop_write(ipc_ns->mq_mnt); -out_err: + err = vfs_unlink(dentry->d_parent->d_inode, dentry); + } dput(dentry); out_unlock: - mutex_unlock(&ipc_ns->mq_mnt->mnt_root->d_inode->i_mutex); - putname(name); + mutex_unlock(&mnt->mnt_root->d_inode->i_mutex); if (inode) iput(inode); + mnt_drop_write(mnt); +out_name: + putname(name); return err; } -- cgit v1.2.3-70-g09d2 From 515c7af85ed92696c311c53d53cb4898ff32d784 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 18 Aug 2012 16:11:37 -0400 Subject: x32: Use compat shims for {g,s}etsockopt Some of the arguments to {g,s}etsockopt are passed in userland pointers. If we try to use the 64bit entry point, we end up sometimes failing. For example, dhcpcd doesn't run in x32: # dhcpcd eth0 dhcpcd[1979]: version 5.5.6 starting dhcpcd[1979]: eth0: broadcasting for a lease dhcpcd[1979]: eth0: open_socket: Invalid argument dhcpcd[1979]: eth0: send_raw_packet: Bad file descriptor The code in particular is getting back EINVAL when doing: struct sock_fprog pf; setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER, &pf, sizeof(pf)); Diving into the kernel code, we can see: include/linux/filter.h: struct sock_fprog { unsigned short len; struct sock_filter __user *filter; }; net/core/sock.c: case SO_ATTACH_FILTER: ret = -EINVAL; if (optlen == sizeof(struct sock_fprog)) { struct sock_fprog fprog; ret = -EFAULT; if (copy_from_user(&fprog, optval, sizeof(fprog))) break; ret = sk_attach_filter(&fprog, sk); } break; arch/x86/syscalls/syscall_64.tbl: 54 common setsockopt sys_setsockopt 55 common getsockopt sys_getsockopt So for x64, sizeof(sock_fprog) is 16 bytes. For x86/x32, it's 8 bytes. This comes down to the pointer being 32bit for x32, which means we need to do structure size translation. But since x32 comes in directly to sys_setsockopt, it doesn't get translated like x86. After changing the syscall table and rebuilding glibc with the new kernel headers, dhcp runs fine in an x32 userland. Oddly, it seems like Linus noted the same thing during the initial port, but I guess that was missed/lost along the way: https://lkml.org/lkml/2011/8/26/452 [ hpa: tagging for -stable since this is an ABI fix. ] Bugzilla: https://bugs.gentoo.org/423649 Reported-by: Mads Signed-off-by: Mike Frysinger Link: http://lkml.kernel.org/r/1345320697-15713-1-git-send-email-vapier@gentoo.org Cc: H. J. Lu Cc: v3.4..v3.5 Signed-off-by: H. Peter Anvin --- arch/x86/syscalls/syscall_64.tbl | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl index 29aed7ac2c0..a582bfed95b 100644 --- a/arch/x86/syscalls/syscall_64.tbl +++ b/arch/x86/syscalls/syscall_64.tbl @@ -60,8 +60,8 @@ 51 common getsockname sys_getsockname 52 common getpeername sys_getpeername 53 common socketpair sys_socketpair -54 common setsockopt sys_setsockopt -55 common getsockopt sys_getsockopt +54 64 setsockopt sys_setsockopt +55 64 getsockopt sys_getsockopt 56 common clone stub_clone 57 common fork stub_fork 58 common vfork stub_vfork @@ -353,3 +353,5 @@ 538 x32 sendmmsg compat_sys_sendmmsg 539 x32 process_vm_readv compat_sys_process_vm_readv 540 x32 process_vm_writev compat_sys_process_vm_writev +541 x32 setsockopt compat_sys_setsockopt +542 x32 getsockopt compat_sys_getsockopt -- cgit v1.2.3-70-g09d2 From 64f503076f9921fc714a2c79fb0fa520869d2c08 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 18 Aug 2012 10:30:05 -0700 Subject: sections: Fix section conflicts in drivers/hwmon Signed-off-by: Andi Kleen Signed-off-by: Guenter Roeck --- drivers/hwmon/coretemp.c | 2 +- drivers/hwmon/w83627hf.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index faa16f80db9..0fa356fe82c 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -196,7 +196,7 @@ struct tjmax { int tjmax; }; -static struct tjmax __cpuinitconst tjmax_table[] = { +static const struct tjmax __cpuinitconst tjmax_table[] = { { "CPU D410", 100000 }, { "CPU D425", 100000 }, { "CPU D510", 100000 }, diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index ab4825205a9..5b1a6a66644 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -1206,7 +1206,7 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, int err = -ENODEV; u16 val; - static const __initdata char *names[] = { + static __initconst char *const names[] = { "W83627HF", "W83627THF", "W83697HF", -- cgit v1.2.3-70-g09d2 From ebdc82899ec5ed35af1c79ed6a4eeda69dad9b90 Mon Sep 17 00:00:00 2001 From: Markus Trippelsdorf Date: Sat, 18 Aug 2012 18:35:51 -0600 Subject: dyndbg: fix for SOH in logging messages commit af7f2158fde was done against master, and clashed with structured logging's change of KERN_LEVEL to SOH. Bisected and fixed by Markus Trippelsdorf. Reported-by: Markus Trippelsdorf Signed-off-by: Jim Cromie Cc: Linus Torvalds Cc: Andrew Morton Cc: Jason Baron Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index cdd01c52c62..5e6e00bc165 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1912,8 +1912,8 @@ int __dev_printk(const char *level, const struct device *dev, "DEVICE=+%s:%s", subsys, dev_name(dev)); } skip: - if (level[3]) - level_extra = &level[3]; /* skip past "" */ + if (level[2]) + level_extra = &level[2]; /* skip past KERN_SOH "L" */ return printk_emit(0, level[1] - '0', dictlen ? dict : NULL, dictlen, -- cgit v1.2.3-70-g09d2 From a2fa3ccd7b43665fe14cb562761a6c3d26a1d13f Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:40:56 +1200 Subject: alpha: Don't export SOCK_NONBLOCK to user space. Currently we export SOCK_NONBLOCK to user space but that conflicts with the definition from glibc leading to compilation errors in user programs (e.g. see Debian bug #658460). The generic socket.h restricts the definition of SOCK_NONBLOCK to the kernel, as does the MIPS specific socket.h, so let's do the same on Alpha. Signed-off-by: Michael Cree Acked-by: Matt Turner Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/socket.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h index dcb221a4b5b..7d2f75be932 100644 --- a/arch/alpha/include/asm/socket.h +++ b/arch/alpha/include/asm/socket.h @@ -76,9 +76,11 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#ifdef __KERNEL__ /* O_NONBLOCK clashes with the bits used for socket types. Therefore we * have to define SOCK_NONBLOCK to a different value here. */ #define SOCK_NONBLOCK 0x40000000 +#endif /* __KERNEL__ */ #endif /* _ASM_SOCKET_H */ -- cgit v1.2.3-70-g09d2 From d8d5da129857bfd54b603771fca5409062167392 Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:40:57 +1200 Subject: alpha: Wire up cross memory attach syscalls Add sys_process_vm_readv and sys_process_vm_writev to Alpha. Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/unistd.h | 4 +++- arch/alpha/kernel/systbls.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 633b23b0664..a31a78eac9b 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -465,10 +465,12 @@ #define __NR_setns 501 #define __NR_accept4 502 #define __NR_sendmmsg 503 +#define __NR_process_vm_readv 504 +#define __NR_process_vm_writev 505 #ifdef __KERNEL__ -#define NR_SYSCALLS 504 +#define NR_SYSCALLS 506 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_STAT64 diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 87835235f11..b64157c98e0 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -522,6 +522,8 @@ sys_call_table: .quad sys_setns .quad sys_accept4 .quad sys_sendmmsg + .quad sys_process_vm_readv + .quad sys_process_vm_writev /* 505 */ .size sys_call_table, . - sys_call_table .type sys_call_table, @object -- cgit v1.2.3-70-g09d2 From f2db633d301b4b50f5f93de0e8314cc81e9bc7de Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:40:58 +1200 Subject: alpha: Use new generic strncpy_from_user() and strnlen_user() Similar to x86/sparc/powerpc implementations except: 1) we implement an extremely efficient has_zero()/find_zero() sequence with both prep_zero_mask() and create_zero_mask() no-operations. 2) Our output from prep_zero_mask() differs in that only the lowest eight bits are used to represent the zero bytes nevertheless it can be safely ORed with other similar masks from prep_zero_mask() and forms input to create_zero_mask(), the two fundamental properties prep_zero_mask() must satisfy. Tests on EV67 and EV68 CPUs revealed that the generic code is essentially as fast (to within 0.5% of CPU cycles) of the old Alpha specific code for large quadword-aligned strings, despite the 30% extra CPU instructions executed. In contrast, the generic code for unaligned strings is substantially slower (by more than a factor of 3) than the old Alpha specific code. Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/Kconfig | 2 + arch/alpha/include/asm/uaccess.h | 34 +-- arch/alpha/include/asm/word-at-a-time.h | 55 +++++ arch/alpha/kernel/alpha_ksyms.c | 2 - arch/alpha/lib/Makefile | 2 - arch/alpha/lib/ev6-strncpy_from_user.S | 424 -------------------------------- arch/alpha/lib/ev67-strlen_user.S | 107 -------- arch/alpha/lib/strlen_user.S | 91 ------- arch/alpha/lib/strncpy_from_user.S | 339 ------------------------- 9 files changed, 62 insertions(+), 994 deletions(-) create mode 100644 arch/alpha/include/asm/word-at-a-time.h delete mode 100644 arch/alpha/lib/ev6-strncpy_from_user.S delete mode 100644 arch/alpha/lib/ev67-strlen_user.S delete mode 100644 arch/alpha/lib/strlen_user.S delete mode 100644 arch/alpha/lib/strncpy_from_user.S diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index d5b9b5e645c..9944dedee5b 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -18,6 +18,8 @@ config ALPHA select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_SMP_IDLE_THREAD select GENERIC_CMOS_UPDATE + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index b49ec2f8d6e..766fdfde2b7 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -433,36 +433,12 @@ clear_user(void __user *to, long len) #undef __module_address #undef __module_call -/* Returns: -EFAULT if exception before terminator, N if the entire - buffer filled, else strlen. */ +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) -extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len); - -extern inline long -strncpy_from_user(char *to, const char __user *from, long n) -{ - long ret = -EFAULT; - if (__access_ok((unsigned long)from, 0, get_fs())) - ret = __strncpy_from_user(to, from, n); - return ret; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -extern long __strlen_user(const char __user *); - -extern inline long strlen_user(const char __user *str) -{ - return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0; -} - -/* Returns: 0 if exception before NUL or reaching the supplied limit (N), - * a value greater than N if the limit would be exceeded, else strlen. */ -extern long __strnlen_user(const char __user *, long); - -extern inline long strnlen_user(const char __user *str, long n) -{ - return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0; -} +extern long strncpy_from_user(char *dest, const char __user *src, long count); +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); /* * About the exception table: diff --git a/arch/alpha/include/asm/word-at-a-time.h b/arch/alpha/include/asm/word-at-a-time.h new file mode 100644 index 00000000000..6b340d0f152 --- /dev/null +++ b/arch/alpha/include/asm/word-at-a-time.h @@ -0,0 +1,55 @@ +#ifndef _ASM_WORD_AT_A_TIME_H +#define _ASM_WORD_AT_A_TIME_H + +#include + +/* + * word-at-a-time interface for Alpha. + */ + +/* + * We do not use the word_at_a_time struct on Alpha, but it needs to be + * implemented to humour the generic code. + */ +struct word_at_a_time { + const unsigned long unused; +}; + +#define WORD_AT_A_TIME_CONSTANTS { 0 } + +/* Return nonzero if val has a zero */ +static inline unsigned long has_zero(unsigned long val, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long zero_locations = __kernel_cmpbge(0, val); + *bits = zero_locations; + return zero_locations; +} + +static inline unsigned long prep_zero_mask(unsigned long val, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +#define create_zero_mask(bits) (bits) + +static inline unsigned long find_zero(unsigned long bits) +{ +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) + /* Simple if have CIX instructions */ + return __kernel_cttz(bits); +#else + unsigned long t1, t2, t3; + /* Retain lowest set bit only */ + bits &= -bits; + /* Binary search for lowest set bit */ + t1 = bits & 0xf0; + t2 = bits & 0xcc; + t3 = bits & 0xaa; + if (t1) t1 = 4; + if (t2) t2 = 2; + if (t3) t3 = 1; + return t1 + t2 + t3; +#endif +} + +#endif /* _ASM_WORD_AT_A_TIME_H */ diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index d96e742d4dc..a354277bbaa 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -74,8 +74,6 @@ EXPORT_SYMBOL(alpha_fp_emul); */ EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(__do_clear_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__strnlen_user); /* * SMP-specific symbols. diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile index c0a83ab62b7..59660743237 100644 --- a/arch/alpha/lib/Makefile +++ b/arch/alpha/lib/Makefile @@ -31,8 +31,6 @@ lib-y = __divqu.o __remqu.o __divlu.o __remlu.o \ $(ev6-y)memchr.o \ $(ev6-y)copy_user.o \ $(ev6-y)clear_user.o \ - $(ev6-y)strncpy_from_user.o \ - $(ev67-y)strlen_user.o \ $(ev6-y)csum_ipv6_magic.o \ $(ev6-y)clear_page.o \ $(ev6-y)copy_page.o \ diff --git a/arch/alpha/lib/ev6-strncpy_from_user.S b/arch/alpha/lib/ev6-strncpy_from_user.S deleted file mode 100644 index d2e28178cac..00000000000 --- a/arch/alpha/lib/ev6-strncpy_from_user.S +++ /dev/null @@ -1,424 +0,0 @@ -/* - * arch/alpha/lib/ev6-strncpy_from_user.S - * 21264 version contributed by Rick Gorton - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * A bunch of instructions got moved and temp registers were changed - * to aid in scheduling. Control flow was also re-arranged to eliminate - * branches, and to provide longer code sequences to enable better scheduling. - * A total rewrite (using byte load/stores for start & tail sequences) - * is desirable, but very difficult to do without a from-scratch rewrite. - * Save that for the future. - */ - - -#include -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 4 -__strncpy_from_user: - and a0, 7, t3 # E : find dest misalignment - beq a2, $zerolength # U : - - /* Are source and destination co-aligned? */ - mov a0, v0 # E : save the string start - xor a0, a1, t4 # E : - EX( ldq_u t1, 0(a1) ) # L : Latency=3 load first quadword - ldq_u t0, 0(a0) # L : load first (partial) aligned dest quadword - - addq a2, t3, a2 # E : bias count by dest misalignment - subq a2, 1, a3 # E : - addq zero, 1, t10 # E : - and t4, 7, t4 # E : misalignment between the two - - and a3, 7, t6 # E : number of tail bytes - sll t10, t6, t10 # E : t10 = bitmask of last count byte - bne t4, $unaligned # U : - lda t2, -1 # E : build a mask against false zero - - /* - * We are co-aligned; take care of a partial first word. - * On entry to this basic block: - * t0 == the first destination word for masking back in - * t1 == the first source word. - */ - - srl a3, 3, a2 # E : a2 = loop counter = (count - 1)/8 - addq a1, 8, a1 # E : - mskqh t2, a1, t2 # U : detection in the src word - nop - - /* Create the 1st output word and detect 0's in the 1st input word. */ - mskqh t1, a1, t3 # U : - mskql t0, a1, t0 # U : assemble the first output word - ornot t1, t2, t2 # E : - nop - - cmpbge zero, t2, t8 # E : bits set iff null found - or t0, t3, t0 # E : - beq a2, $a_eoc # U : - bne t8, $a_eos # U : 2nd branch in a quad. Bad. - - /* On entry to this basic block: - * t0 == a source quad not containing a null. - * a0 - current aligned destination address - * a1 - current aligned source address - * a2 - count of quadwords to move. - * NOTE: Loop improvement - unrolling this is going to be - * a huge win, since we're going to stall otherwise. - * Fix this later. For _really_ large copies, look - * at using wh64 on a look-ahead basis. See the code - * in clear_user.S and copy_user.S. - * Presumably, since (a0) and (a1) do not overlap (by C definition) - * Lots of nops here: - * - Separate loads from stores - * - Keep it to 1 branch/quadpack so the branch predictor - * can train. - */ -$a_loop: - stq_u t0, 0(a0) # L : - addq a0, 8, a0 # E : - nop - subq a2, 1, a2 # E : - - EX( ldq_u t0, 0(a1) ) # L : - addq a1, 8, a1 # E : - cmpbge zero, t0, t8 # E : Stall 2 cycles on t0 - beq a2, $a_eoc # U : - - beq t8, $a_loop # U : - nop - nop - nop - - /* Take care of the final (partial) word store. At this point - * the end-of-count bit is set in t8 iff it applies. - * - * On entry to this basic block we have: - * t0 == the source word containing the null - * t8 == the cmpbge mask that found it. - */ -$a_eos: - negq t8, t12 # E : find low bit set - and t8, t12, t12 # E : - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t12, t6, t8 # E : - zapnot t0, t8, t0 # U : clear src bytes > null - zap t1, t8, t1 # U : clear dst bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # L : - br $finish_up # L0 : - nop - nop - - /* Add the end-of-count bit to the eos detection bitmask. */ - .align 4 -$a_eoc: - or t10, t8, t8 - br $a_eos - nop - nop - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 4 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # L : load second src word - addq a1, 8, a1 # E : - mskql t0, a0, t0 # U : mask trailing garbage in dst - extqh t2, a1, t4 # U : - - or t1, t4, t1 # E : first aligned src word complete - mskqh t1, a0, t1 # U : mask leading garbage in src - or t0, t1, t0 # E : first output word complete - or t0, t6, t6 # E : mask original data for zero test - - cmpbge zero, t6, t8 # E : - beq a2, $u_eocfin # U : - bne t8, $u_final # U : bad news - 2nd branch in a quad - lda t6, -1 # E : mask out the bits we have - - mskql t6, a1, t6 # U : already seen - stq_u t0, 0(a0) # L : store first output word - or t6, t2, t2 # E : - cmpbge zero, t2, t8 # E : find nulls in second partial - - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - bne t8, $u_late_head_exit # U : - nop - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # U : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # L : read next high-order source word - addq a1, 8, a1 # E : - cmpbge zero, t2, t8 # E : - - beq a2, $u_eoc # U : - bne t8, $u_eos # U : - nop - nop - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - /* - * Extra nops here: - * separate load quads from store quads - * only one branch/quad to permit predictor training - */ - - .align 4 -$u_loop: - extqh t2, a1, t0 # U : extract high bits for current word - addq a1, 8, a1 # E : - extql t2, a1, t3 # U : extract low bits for next time - addq a0, 8, a0 # E : - - or t0, t1, t0 # E : current dst word now complete - EX( ldq_u t2, 0(a1) ) # L : load high word for next time - subq a2, 1, a2 # E : - nop - - stq_u t0, -8(a0) # L : save the current word - mov t3, t1 # E : - cmpbge zero, t2, t8 # E : test new word for eos - beq a2, $u_eoc # U : - - beq t8, $u_loop # U : - nop - nop - nop - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ - .align 4 -$u_eos: - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : first (partial) source word complete - cmpbge zero, t0, t8 # E : is the null in this first bit? - nop - - bne t8, $u_final # U : - stq_u t0, 0(a0) # L : the null was in the high-order bits - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - - .align 4 -$u_late_head_exit: - extql t2, a1, t0 # U : - cmpbge zero, t0, t8 # E : - or t8, t10, t6 # E : - cmoveq a2, t6, t8 # E : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ - .align 4 -$u_final: - negq t8, t6 # E : isolate low bit set - and t6, t8, t12 # E : - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t6, t12, t8 # E : - zapnot t0, t8, t0 # U : kill source bytes > null - zap t1, t8, t1 # U : kill dest bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # E : - br $finish_up # U : - nop - nop - - .align 4 -$u_eoc: # end-of-count - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : - cmpbge zero, t0, t8 # E : - nop - - .align 4 -$u_eocfin: # end-of-count, final word - or t10, t8, t8 # E : - br $u_final # U : - nop - nop - - /* Unaligned copy entry point. */ - .align 4 -$unaligned: - - srl a3, 3, a2 # U : a2 = loop counter = (count - 1)/8 - and a0, 7, t4 # E : find dest misalignment - and a1, 7, t5 # E : find src misalignment - mov zero, t0 # E : - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t6 # E : - beq t4, 1f # U : - ldq_u t0, 0(a0) # L : - lda t6, -1 # E : - - mskql t6, a0, t6 # E : - nop - nop - nop - - .align 4 -1: - subq a1, t4, a1 # E : sub dest misalignment from src addr - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - cmplt t4, t5, t12 # E : - extql t1, a1, t1 # U : shift src into place - lda t2, -1 # E : for creating masks later - - beq t12, $u_head # U : - mskqh t2, t5, t2 # U : begin src byte validity mask - cmpbge zero, t1, t8 # E : is there a zero? - nop - - extql t2, a1, t2 # U : - or t8, t10, t5 # E : test for end-of-count too - cmpbge zero, t2, t3 # E : - cmoveq a2, t5, t8 # E : Latency=2, extra map slot - - nop # E : goes with cmov - andnot t8, t3, t8 # E : - beq t8, $u_head # U : - nop - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # L : - negq t8, t6 # E : build bitmask of bytes <= zero - mskqh t1, t4, t1 # U : - and t6, t8, t12 # E : - - subq t12, 1, t6 # E : - or t6, t12, t8 # E : - zapnot t2, t8, t2 # U : prepare source word; mirror changes - zapnot t1, t8, t1 # U : to source validity mask - - andnot t0, t2, t0 # E : zero place for source to reside - or t0, t1, t0 # E : and put it there - stq_u t0, 0(a0) # L : - nop - - .align 4 -$finish_up: - zapnot t0, t12, t4 # U : was last byte written null? - and t12, 0xf0, t3 # E : binary search for the address of the - cmovne t4, 1, t4 # E : Latency=2, extra map slot - nop # E : with cmovne - - and t12, 0xcc, t2 # E : last byte written - and t12, 0xaa, t1 # E : - cmovne t3, 4, t3 # E : Latency=2, extra map slot - nop # E : with cmovne - - bic a0, 7, t0 - cmovne t2, 2, t2 # E : Latency=2, extra map slot - nop # E : with cmovne - nop - - cmovne t1, 1, t1 # E : Latency=2, extra map slot - nop # E : with cmovne - addq t0, t3, t0 # E : - addq t1, t2, t1 # E : - - addq t0, t1, t0 # E : - addq t0, t4, t0 # add one if we filled the buffer - subq t0, v0, v0 # find string length - ret # L0 : - - .align 4 -$zerolength: - nop - nop - nop - clr v0 - -$exception: - nop - nop - nop - ret - - .end __strncpy_from_user diff --git a/arch/alpha/lib/ev67-strlen_user.S b/arch/alpha/lib/ev67-strlen_user.S deleted file mode 100644 index 57e0d77b81a..00000000000 --- a/arch/alpha/lib/ev67-strlen_user.S +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/alpha/lib/ev67-strlen_user.S - * 21264 version contributed by Rick Gorton - * - * Return the length of the string including the NULL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * Try not to change the actual algorithm if possible for consistency. - */ - -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 4 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - nop - nop - nop - - .globl __strnlen_user - - .align 4 -__strnlen_user: - .prologue 0 - EX( ldq_u t0, 0(a0) ) # L : load first quadword (a0 may be misaligned) - lda t1, -1(zero) # E : - - insqh t1, a0, t1 # U : - andnot a0, 7, v0 # E : - or t1, t0, t0 # E : - subq a0, 1, a0 # E : get our +1 for the return - - cmpbge zero, t0, t1 # E : t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 # E : - subq a0, v0, t0 # E : - bne t1, $found # U : - - addq t2, t0, t2 # E : - addq a1, 1, a1 # E : - nop # E : - nop # E : - - .align 4 -$loop: ble t2, $limit # U : - EX( ldq t0, 8(v0) ) # L : - nop # E : - nop # E : - - cmpbge zero, t0, t1 # E : - subq t2, 8, t2 # E : - addq v0, 8, v0 # E : addr += 8 - beq t1, $loop # U : - -$found: cttz t1, t2 # U0 : - addq v0, t2, v0 # E : - subq v0, a0, v0 # E : - ret # L0 : - -$exception: - nop - nop - nop - ret - - .align 4 # currently redundant -$limit: - nop - nop - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strlen_user.S b/arch/alpha/lib/strlen_user.S deleted file mode 100644 index 508a18e9647..00000000000 --- a/arch/alpha/lib/strlen_user.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/alpha/lib/strlen_user.S - * - * Return the length of the string including the NUL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - */ - -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 3 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - - .globl __strnlen_user - - .align 3 -__strnlen_user: - .prologue 0 - - EX( ldq_u t0, 0(a0) ) # load first quadword (a0 may be misaligned) - lda t1, -1(zero) - insqh t1, a0, t1 - andnot a0, 7, v0 - or t1, t0, t0 - subq a0, 1, a0 # get our +1 for the return - cmpbge zero, t0, t1 # t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 - subq a0, v0, t0 - bne t1, $found - - addq t2, t0, t2 - addq a1, 1, a1 - - .align 3 -$loop: ble t2, $limit - EX( ldq t0, 8(v0) ) - subq t2, 8, t2 - addq v0, 8, v0 # addr += 8 - cmpbge zero, t0, t1 - beq t1, $loop - -$found: negq t1, t2 # clear all but least set bit - and t1, t2, t1 - - and t1, 0xf0, t2 # binary search for that set bit - and t1, 0xcc, t3 - and t1, 0xaa, t4 - cmovne t2, 4, t2 - cmovne t3, 2, t3 - cmovne t4, 1, t4 - addq t2, t3, t2 - addq v0, t4, v0 - addq v0, t2, v0 - nop # dual issue next two on ev4 and ev5 - subq v0, a0, v0 -$exception: - ret - - .align 3 # currently redundant -$limit: - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strncpy_from_user.S b/arch/alpha/lib/strncpy_from_user.S deleted file mode 100644 index 73ee21160ff..00000000000 --- a/arch/alpha/lib/strncpy_from_user.S +++ /dev/null @@ -1,339 +0,0 @@ -/* - * arch/alpha/lib/strncpy_from_user.S - * Contributed by Richard Henderson (rth@tamu.edu) - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - */ - - -#include -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 3 -$aligned: - /* On entry to this basic block: - t0 == the first destination word for masking back in - t1 == the first source word. */ - - /* Create the 1st output word and detect 0's in the 1st input word. */ - lda t2, -1 # e1 : build a mask against false zero - mskqh t2, a1, t2 # e0 : detection in the src word - mskqh t1, a1, t3 # e0 : - ornot t1, t2, t2 # .. e1 : - mskql t0, a1, t0 # e0 : assemble the first output word - cmpbge zero, t2, t8 # .. e1 : bits set iff null found - or t0, t3, t0 # e0 : - beq a2, $a_eoc # .. e1 : - bne t8, $a_eos # .. e1 : - - /* On entry to this basic block: - t0 == a source word not containing a null. */ - -$a_loop: - stq_u t0, 0(a0) # e0 : - addq a0, 8, a0 # .. e1 : - EX( ldq_u t0, 0(a1) ) # e0 : - addq a1, 8, a1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t0, t8 # .. e1 (stall) - beq a2, $a_eoc # e1 : - beq t8, $a_loop # e1 : - - /* Take care of the final (partial) word store. At this point - the end-of-count bit is set in t8 iff it applies. - - On entry to this basic block we have: - t0 == the source word containing the null - t8 == the cmpbge mask that found it. */ - -$a_eos: - negq t8, t12 # e0 : find low bit set - and t8, t12, t12 # e1 (stall) - - /* For the sake of the cache, don't read a destination word - if we're not going to need it. */ - and t12, 0x80, t6 # e0 : - bne t6, 1f # .. e1 (zdb) - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t12, t6, t8 # e0 : - unop # - zapnot t0, t8, t0 # e0 : clear src bytes > null - zap t1, t8, t1 # .. e1 : clear dst bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) - br $finish_up - - /* Add the end-of-count bit to the eos detection bitmask. */ -$a_eoc: - or t10, t8, t8 - br $a_eos - - /*** The Function Entry Point ***/ - .align 3 -__strncpy_from_user: - mov a0, v0 # save the string start - beq a2, $zerolength - - /* Are source and destination co-aligned? */ - xor a0, a1, t1 # e0 : - and a0, 7, t0 # .. e1 : find dest misalignment - and t1, 7, t1 # e0 : - addq a2, t0, a2 # .. e1 : bias count by dest misalignment - subq a2, 1, a2 # e0 : - and a2, 7, t2 # e1 : - srl a2, 3, a2 # e0 : a2 = loop counter = (count - 1)/8 - addq zero, 1, t10 # .. e1 : - sll t10, t2, t10 # e0 : t10 = bitmask of last count byte - bne t1, $unaligned # .. e1 : - - /* We are co-aligned; take care of a partial first word. */ - - EX( ldq_u t1, 0(a1) ) # e0 : load first src word - addq a1, 8, a1 # .. e1 : - - beq t0, $aligned # avoid loading dest word if not needed - ldq_u t0, 0(a0) # e0 : - br $aligned # .. e1 : - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 3 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # e0 : load second src word - addq a1, 8, a1 # .. e1 : - mskql t0, a0, t0 # e0 : mask trailing garbage in dst - extqh t2, a1, t4 # e0 : - or t1, t4, t1 # e1 : first aligned src word complete - mskqh t1, a0, t1 # e0 : mask leading garbage in src - or t0, t1, t0 # e0 : first output word complete - or t0, t6, t6 # e1 : mask original data for zero test - cmpbge zero, t6, t8 # e0 : - beq a2, $u_eocfin # .. e1 : - bne t8, $u_final # e1 : - - lda t6, -1 # e1 : mask out the bits we have - mskql t6, a1, t6 # e0 : already seen - stq_u t0, 0(a0) # e0 : store first output word - or t6, t2, t2 # .. e1 : - cmpbge zero, t2, t8 # e0 : find nulls in second partial - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e0 : - bne t8, $u_late_head_exit # .. e1 : - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # e0 : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # .. e1 : read next high-order source word - addq a1, 8, a1 # e0 : - cmpbge zero, t2, t8 # e1 (stall) - beq a2, $u_eoc # e1 : - bne t8, $u_eos # e1 : - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - .align 3 -$u_loop: - extqh t2, a1, t0 # e0 : extract high bits for current word - addq a1, 8, a1 # .. e1 : - extql t2, a1, t3 # e0 : extract low bits for next time - addq a0, 8, a0 # .. e1 : - or t0, t1, t0 # e0 : current dst word now complete - EX( ldq_u t2, 0(a1) ) # .. e1 : load high word for next time - stq_u t0, -8(a0) # e0 : save the current word - mov t3, t1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t2, t8 # .. e1 : test new word for eos - beq a2, $u_eoc # e1 : - beq t8, $u_loop # e1 : - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ -$u_eos: - extqh t2, a1, t0 # e0 : - or t0, t1, t0 # e1 : first (partial) source word complete - - cmpbge zero, t0, t8 # e0 : is the null in this first bit? - bne t8, $u_final # .. e1 (zdb) - - stq_u t0, 0(a0) # e0 : the null was in the high-order bits - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e1 : - -$u_late_head_exit: - extql t2, a1, t0 # .. e0 : - cmpbge zero, t0, t8 # e0 : - or t8, t10, t6 # e1 : - cmoveq a2, t6, t8 # e0 : - nop # .. e1 : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ -$u_final: - negq t8, t6 # e0 : isolate low bit set - and t6, t8, t12 # e1 : - - and t12, 0x80, t6 # e0 : avoid dest word load if we can - bne t6, 1f # .. e1 (zdb) - - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t6, t12, t8 # e0 : - zapnot t0, t8, t0 # .. e1 : kill source bytes > null - zap t1, t8, t1 # e0 : kill dest bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) # e0 : - br $finish_up - -$u_eoc: # end-of-count - extqh t2, a1, t0 - or t0, t1, t0 - cmpbge zero, t0, t8 - -$u_eocfin: # end-of-count, final word - or t10, t8, t8 - br $u_final - - /* Unaligned copy entry point. */ - .align 3 -$unaligned: - - EX( ldq_u t1, 0(a1) ) # e0 : load first source word - - and a0, 7, t4 # .. e1 : find dest misalignment - and a1, 7, t5 # e0 : find src misalignment - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t0 # .. e1 : - mov zero, t6 # e0 : - beq t4, 1f # .. e1 : - ldq_u t0, 0(a0) # e0 : - lda t6, -1 # .. e1 : - mskql t6, a0, t6 # e0 : -1: - subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr - - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - - cmplt t4, t5, t12 # e1 : - extql t1, a1, t1 # .. e0 : shift src into place - lda t2, -1 # e0 : for creating masks later - beq t12, $u_head # e1 : - - mskqh t2, t5, t2 # e0 : begin src byte validity mask - cmpbge zero, t1, t8 # .. e1 : is there a zero? - extql t2, a1, t2 # e0 : - or t8, t10, t5 # .. e1 : test for end-of-count too - cmpbge zero, t2, t3 # e0 : - cmoveq a2, t5, t8 # .. e1 : - andnot t8, t3, t8 # e0 : - beq t8, $u_head # .. e1 (zdb) - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # e0 : - negq t8, t6 # .. e1 : build bitmask of bytes <= zero - mskqh t1, t4, t1 # e0 : - and t6, t8, t12 # .. e1 : - subq t12, 1, t6 # e0 : - or t6, t12, t8 # e1 : - - zapnot t2, t8, t2 # e0 : prepare source word; mirror changes - zapnot t1, t8, t1 # .. e1 : to source validity mask - - andnot t0, t2, t0 # e0 : zero place for source to reside - or t0, t1, t0 # e1 : and put it there - stq_u t0, 0(a0) # e0 : - -$finish_up: - zapnot t0, t12, t4 # was last byte written null? - cmovne t4, 1, t4 - - and t12, 0xf0, t3 # binary search for the address of the - and t12, 0xcc, t2 # last byte written - and t12, 0xaa, t1 - bic a0, 7, t0 - cmovne t3, 4, t3 - cmovne t2, 2, t2 - cmovne t1, 1, t1 - addq t0, t3, t0 - addq t1, t2, t1 - addq t0, t1, t0 - addq t0, t4, t0 # add one if we filled the buffer - - subq t0, v0, v0 # find string length - ret - -$zerolength: - clr v0 -$exception: - ret - - .end __strncpy_from_user -- cgit v1.2.3-70-g09d2 From be53db6e4edd9dc013b21a929ad2b142dea8b9c0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 19 Aug 2012 14:40:59 +1200 Subject: alpha: take a bunch of syscalls into osf_sys.c New helper: current_thread_info(). Allows to do a bunch of odd syscalls in C. While we are at it, there had never been a reason to do osf_getpriority() in assembler. We also get "namespace"-aware (read: consistent with getuid(2), etc.) behaviour from getx?id() syscalls now. Signed-off-by: Al Viro Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/ptrace.h | 5 +- arch/alpha/kernel/entry.S | 109 ---------------------------------------- arch/alpha/kernel/osf_sys.c | 49 ++++++++++++++++++ arch/alpha/kernel/systbls.S | 2 +- kernel/timer.c | 9 ---- 5 files changed, 54 insertions(+), 120 deletions(-) diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h index fd698a174f2..b87755a1955 100644 --- a/arch/alpha/include/asm/ptrace.h +++ b/arch/alpha/include/asm/ptrace.h @@ -76,7 +76,10 @@ struct switch_stack { #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1) -#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0) +#define current_pt_regs() \ + ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1) + +#define force_successful_syscall_return() (current_pt_regs()->r0 = 0) #endif diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index 6d159cee5f2..22b0c4d414a 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -796,115 +796,6 @@ sys_rt_sigreturn: br ret_from_sys_call .end sys_rt_sigreturn - .align 4 - .globl sys_sethae - .ent sys_sethae -sys_sethae: - .prologue 0 - stq $16, 152($sp) - ret -.end sys_sethae - - .align 4 - .globl osf_getpriority - .ent osf_getpriority -osf_getpriority: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - jsr $26, sys_getpriority - - ldq $26, 0($sp) - blt $0, 1f - - /* Return value is the unbiased priority, i.e. 20 - prio. - This does result in negative return values, so signal - no error by writing into the R0 slot. */ - lda $1, 20 - stq $31, 16($sp) - subl $1, $0, $0 - unop - -1: lda $sp, 16($sp) - ret -.end osf_getpriority - - .align 4 - .globl sys_getxuid - .ent sys_getxuid -sys_getxuid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_UID($3) - ldl $1, CRED_EUID($3) - stq $1, 80($sp) - ret -.end sys_getxuid - - .align 4 - .globl sys_getxgid - .ent sys_getxgid -sys_getxgid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_GID($3) - ldl $1, CRED_EGID($3) - stq $1, 80($sp) - ret -.end sys_getxgid - - .align 4 - .globl sys_getxpid - .ent sys_getxpid -sys_getxpid: - .prologue 0 - ldq $2, TI_TASK($8) - - /* See linux/kernel/timer.c sys_getppid for discussion - about this loop. */ - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - ldl $0, TASK_TGID($2) -1: ldl $1, TASK_TGID($4) -#ifdef CONFIG_SMP - mov $4, $5 - mb - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - cmpeq $4, $5, $5 - beq $5, 1b -#endif - stq $1, 80($sp) - ret -.end sys_getxpid - - .align 4 - .globl sys_alpha_pipe - .ent sys_alpha_pipe -sys_alpha_pipe: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - mov $31, $17 - lda $16, 8($sp) - jsr $26, do_pipe_flags - - ldq $26, 0($sp) - bne $0, 1f - - /* The return values are in $0 and $20. */ - ldl $1, 12($sp) - ldl $0, 8($sp) - - stq $1, 80+16($sp) -1: lda $sp, 16($sp) - ret -.end sys_alpha_pipe - .align 4 .globl sys_execve .ent sys_execve diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 98a103621af..bc1acdda7a5 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -1404,3 +1404,52 @@ SYSCALL_DEFINE3(osf_writev, unsigned long, fd, } #endif + +SYSCALL_DEFINE2(osf_getpriority, int, which, int, who) +{ + int prio = sys_getpriority(which, who); + if (prio >= 0) { + /* Return value is the unbiased priority, i.e. 20 - prio. + This does result in negative return values, so signal + no error */ + force_successful_syscall_return(); + prio = 20 - prio; + } + return prio; +} + +SYSCALL_DEFINE0(getxuid) +{ + current_pt_regs()->r20 = sys_geteuid(); + return sys_getuid(); +} + +SYSCALL_DEFINE0(getxgid) +{ + current_pt_regs()->r20 = sys_getegid(); + return sys_getgid(); +} + +SYSCALL_DEFINE0(getxpid) +{ + current_pt_regs()->r20 = sys_getppid(); + return sys_getpid(); +} + +SYSCALL_DEFINE0(alpha_pipe) +{ + int fd[2]; + int res = do_pipe_flags(fd, 0); + if (!res) { + /* The return values are in $0 and $20. */ + current_pt_regs()->r20 = fd[1]; + res = fd[0]; + } + return res; +} + +SYSCALL_DEFINE1(sethae, unsigned long, val) +{ + current_pt_regs()->hae = val; + return 0; +} diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index b64157c98e0..2ac6b45c3e0 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -111,7 +111,7 @@ sys_call_table: .quad sys_socket .quad sys_connect .quad sys_accept - .quad osf_getpriority /* 100 */ + .quad sys_osf_getpriority /* 100 */ .quad sys_send .quad sys_recv .quad sys_sigreturn diff --git a/kernel/timer.c b/kernel/timer.c index a61c09374eb..8c5e7b908c6 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1407,13 +1407,6 @@ SYSCALL_DEFINE1(alarm, unsigned int, seconds) #endif -#ifndef __alpha__ - -/* - * The Alpha uses getxpid, getxuid, and getxgid instead. Maybe this - * should be moved into arch/i386 instead? - */ - /** * sys_getpid - return the thread group id of the current process * @@ -1469,8 +1462,6 @@ SYSCALL_DEFINE0(getegid) return from_kgid_munged(current_user_ns(), current_egid()); } -#endif - static void process_timeout(unsigned long __data) { wake_up_process((struct task_struct *)__data); -- cgit v1.2.3-70-g09d2 From 28d353d9891c28496e366bebe4e65233f59ad1f6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 19 Aug 2012 14:41:00 +1200 Subject: alpha: take kernel_execve() out of entry.S Signed-off-by: Al Viro Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/kernel/alpha_ksyms.c | 1 - arch/alpha/kernel/entry.S | 52 ----------------------------------------- arch/alpha/kernel/process.c | 19 +++++++++++++++ 3 files changed, 19 insertions(+), 53 deletions(-) diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index a354277bbaa..15fa821d09c 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(alpha_write_fp_reg_s); /* entry.S */ EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(kernel_execve); /* Networking helper routines. */ EXPORT_SYMBOL(csum_tcpudp_magic); diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index 22b0c4d414a..ec0da0567ab 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -663,58 +663,6 @@ kernel_thread: br ret_to_kernel .end kernel_thread -/* - * kernel_execve(path, argv, envp) - */ - .align 4 - .globl kernel_execve - .ent kernel_execve -kernel_execve: - /* We can be called from a module. */ - ldgp $gp, 0($27) - lda $sp, -(32+SIZEOF_PT_REGS+8)($sp) - .frame $sp, 32+SIZEOF_PT_REGS+8, $26, 0 - stq $26, 0($sp) - stq $16, 8($sp) - stq $17, 16($sp) - stq $18, 24($sp) - .prologue 1 - - lda $16, 32($sp) - lda $17, 0 - lda $18, SIZEOF_PT_REGS - bsr $26, memset !samegp - - /* Avoid the HAE being gratuitously wrong, which would cause us - to do the whole turn off interrupts thing and restore it. */ - ldq $2, alpha_mv+HAE_CACHE - stq $2, 152+32($sp) - - ldq $16, 8($sp) - ldq $17, 16($sp) - ldq $18, 24($sp) - lda $19, 32($sp) - bsr $26, do_execve !samegp - - ldq $26, 0($sp) - bne $0, 1f /* error! */ - - /* Move the temporary pt_regs struct from its current location - to the top of the kernel stack frame. See copy_thread for - details for a normal process. */ - lda $16, 0x4000 - SIZEOF_PT_REGS($8) - lda $17, 32($sp) - lda $18, SIZEOF_PT_REGS - bsr $26, memmove !samegp - - /* Take that over as our new stack frame and visit userland! */ - lda $sp, 0x4000 - SIZEOF_PT_REGS($8) - br $31, ret_from_sys_call - -1: lda $sp, 32+SIZEOF_PT_REGS+8($sp) - ret -.end kernel_execve - /* * Special system calls. Most of these are special in that they either diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 153d3fce3e8..d6fde98b74b 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -455,3 +455,22 @@ get_wchan(struct task_struct *p) } return pc; } + +int kernel_execve(const char *path, const char *const argv[], const char *const envp[]) +{ + /* Avoid the HAE being gratuitously wrong, which would cause us + to do the whole turn off interrupts thing and restore it. */ + struct pt_regs regs = {.hae = alpha_mv.hae_cache}; + int err = do_execve(path, argv, envp, ®s); + if (!err) { + struct pt_regs *p = current_pt_regs(); + /* copy regs to normal position and off to userland we go... */ + *p = regs; + __asm__ __volatile__ ( + "mov %0, $sp;" + "br $31, ret_from_sys_call" + : : "r"(p)); + } + return err; +} +EXPORT_SYMBOL(kernel_execve); -- cgit v1.2.3-70-g09d2 From 0bcc426b1defa6b629dfa722537cab38876a3ce4 Mon Sep 17 00:00:00 2001 From: Kautuk Consul Date: Sun, 19 Aug 2012 14:41:01 +1200 Subject: alpha/mm/fault.c: Port OOM changes to do_page_fault Commit d065bd810b6d ("mm: retry page fault when blocking on disk transfer") and 37b23e0525d3 ("x86,mm: make pagefault killable") introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to ALPHA. Signed-off-by: Mohd. Faris Signed-off-by: Kautuk Consul Acked-by: Matt Turner Signed-off-by: Michael Cree Signed-off-by: Linus Torvalds --- arch/alpha/mm/fault.c | 36 ++++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c index 5eecab1a84e..0c4132dd350 100644 --- a/arch/alpha/mm/fault.c +++ b/arch/alpha/mm/fault.c @@ -89,6 +89,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr, const struct exception_table_entry *fixup; int fault, si_code = SEGV_MAPERR; siginfo_t info; + unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (cause > 0 ? FAULT_FLAG_WRITE : 0)); /* As of EV6, a load into $31/$f31 is a prefetch, and never faults (or is suppressed by the PALcode). Support that for older CPUs @@ -114,6 +116,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto vmalloc_fault; #endif +retry: down_read(&mm->mmap_sem); vma = find_vma(mm, address); if (!vma) @@ -144,8 +147,11 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* If for any reason at all we couldn't handle the fault, make sure we exit gracefully rather than endlessly redo the fault. */ - fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0); - up_read(&mm->mmap_sem); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; @@ -153,10 +159,26 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) - current->maj_flt++; - else - current->min_flt++; + + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) + current->maj_flt++; + else + current->min_flt++; + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } + } + + up_read(&mm->mmap_sem); + return; /* Something tried to access memory that isn't in our memory map. @@ -186,12 +208,14 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* We ran out of memory, or some other thing happened to us that made us unable to handle the page fault gracefully. */ out_of_memory: + up_read(&mm->mmap_sem); if (!user_mode(regs)) goto no_context; pagefault_out_of_memory(); return; do_sigbus: + up_read(&mm->mmap_sem); /* Send a sigbus, regardless of whether we were in kernel or user mode. */ info.si_signo = SIGBUS; -- cgit v1.2.3-70-g09d2 From 0be421862b857e61964435ffcaa7499cf77a5e5a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 19 Aug 2012 14:41:02 +1200 Subject: alpha: fix fpu.h usage in userspace After commit ec2212088c42 ("Disintegrate asm/system.h for Alpha"), the fpu.h header which we install for userland started depending on special_insns.h which is not installed. However, fpu.h only uses that for __KERNEL__ code, so protect the inclusion the same way to avoid build breakage in glibc: /usr/include/asm/fpu.h:4:31: fatal error: asm/special_insns.h: No such file or directory Cc: stable@vger.kernel.org Reported-by: Matt Turner Signed-off-by: Mike Frysinger Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/fpu.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h index db00f7885fa..e477bcd5b94 100644 --- a/arch/alpha/include/asm/fpu.h +++ b/arch/alpha/include/asm/fpu.h @@ -1,7 +1,9 @@ #ifndef __ASM_ALPHA_FPU_H #define __ASM_ALPHA_FPU_H +#ifdef __KERNEL__ #include +#endif /* * Alpha floating-point control register defines: -- cgit v1.2.3-70-g09d2 From 67a806d9499353fabd5b5ff07337f3aa88a1c3ba Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Sun, 19 Aug 2012 14:41:03 +1200 Subject: Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts The following build error occurred during an alpha build: net/core/sock.c:274:36: error: initializer element is not constant Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Cc: Signed-off-by: Mel Gorman Signed-off-by: Fengguang Wu Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/atomic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index 3bb7ffeae3b..c2cbe4fc391 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -14,8 +14,8 @@ */ -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) -#define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } ) +#define ATOMIC_INIT(i) { (i) } +#define ATOMIC64_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic64_read(v) (*(volatile long *)&(v)->counter) -- cgit v1.2.3-70-g09d2 From d1b5153f3ec83789b71d64efaf2a880c8fe6358e Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:41:04 +1200 Subject: alpha: Fix fall-out from disintegrating asm/system.h Commit ec2212088c42 ("Disintegrate asm/system.h for Alpha") removed asm/system.h however arch/alpha/oprofile/common.c requires definitions that were shifted from asm/system.h to asm/special_insns.h. Include that. Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/oprofile/common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c index a0a5d27aa21..b8ce18f485d 100644 --- a/arch/alpha/oprofile/common.c +++ b/arch/alpha/oprofile/common.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "op_impl.h" -- cgit v1.2.3-70-g09d2 From 94f3ec6b2222eb5c0af0c784f0656ff5b909d870 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 18 Aug 2012 18:55:15 +0300 Subject: sound: oss/sb_audio: prevent divide by zero bug Speed comes from get_user() in audio_ioctl(). We use it to set the "s" variable before clamping it to valid values so it could lead to a divide by zero bug. Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai --- sound/oss/sb_audio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/oss/sb_audio.c b/sound/oss/sb_audio.c index 733b014ec7d..b2b3c014221 100644 --- a/sound/oss/sb_audio.c +++ b/sound/oss/sb_audio.c @@ -575,13 +575,15 @@ static int jazz16_audio_set_speed(int dev, int speed) if (speed > 0) { int tmp; - int s = speed * devc->channels; + int s; if (speed < 5000) speed = 5000; if (speed > 44100) speed = 44100; + s = speed * devc->channels; + devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff; tmp = 256 - devc->tconst; -- cgit v1.2.3-70-g09d2 From 8513915accc611e576dbebb93422c257e7e68be8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 18 Aug 2012 17:43:05 -0700 Subject: ALSA: fix pcm.h kernel-doc warning and notation Fix kernel-doc warning in and add function name to make the kernel-doc notation complete. Warning(include/sound/pcm.h:1081): No description found for parameter 'substream' Signed-off-by: Randy Dunlap Signed-off-by: Takashi Iwai --- include/sound/pcm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/sound/pcm.h b/include/sound/pcm.h index c75c0d1a85e..cdca2ab1e71 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -1075,7 +1075,8 @@ static inline void snd_pcm_limit_isa_dma_size(int dma, size_t *max) const char *snd_pcm_format_name(snd_pcm_format_t format); /** - * Get a string naming the direction of a stream + * snd_pcm_stream_str - Get a string naming the direction of a stream + * @substream: the pcm substream instance */ static inline const char *snd_pcm_stream_str(struct snd_pcm_substream *substream) { -- cgit v1.2.3-70-g09d2 From ce026cb9cbf1d529652394ea91fb8a459072be91 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 13 Jul 2012 18:04:23 -0500 Subject: crypto: caam - fix possible deadlock condition commit "crypto: caam - use non-irq versions of spinlocks for job rings" made two bad assumptions: (a) The caam_jr_enqueue lock isn't used in softirq context. Not true: jr_enqueue can be interrupted by an incoming net interrupt and the received packet may be sent for encryption, via caam_jr_enqueue in softirq context, thereby inducing a deadlock. This is evidenced when running netperf over an IPSec tunnel between two P4080's, with spinlock debugging turned on: [ 892.092569] BUG: spinlock lockup on CPU#7, netperf/10634, e8bf5f70 [ 892.098747] Call Trace: [ 892.101197] [eff9fc10] [c00084c0] show_stack+0x48/0x15c (unreliable) [ 892.107563] [eff9fc50] [c0239c2c] do_raw_spin_lock+0x16c/0x174 [ 892.113399] [eff9fc80] [c0596494] _raw_spin_lock+0x3c/0x50 [ 892.118889] [eff9fc90] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.124550] [eff9fcd0] [c044a644] aead_decrypt+0x6c/0xc8 [ 892.129625] BUG: spinlock lockup on CPU#5, swapper/5/0, e8bf5f70 [ 892.129629] Call Trace: [ 892.129637] [effa7c10] [c00084c0] show_stack+0x48/0x15c (unreliable) [ 892.129645] [effa7c50] [c0239c2c] do_raw_spin_lock+0x16c/0x174 [ 892.129652] [effa7c80] [c0596494] _raw_spin_lock+0x3c/0x50 [ 892.129660] [effa7c90] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.129666] [effa7cd0] [c044a644] aead_decrypt+0x6c/0xc8 [ 892.129674] [effa7d00] [c0509724] esp_input+0x178/0x334 [ 892.129681] [effa7d50] [c0519778] xfrm_input+0x77c/0x818 [ 892.129688] [effa7da0] [c050e344] xfrm4_rcv_encap+0x20/0x30 [ 892.129697] [effa7db0] [c04b90c8] ip_local_deliver+0x190/0x408 [ 892.129703] [effa7de0] [c04b966c] ip_rcv+0x32c/0x898 [ 892.129709] [effa7e10] [c048b998] __netif_receive_skb+0x27c/0x4e8 [ 892.129715] [effa7e80] [c048d744] netif_receive_skb+0x4c/0x13c [ 892.129726] [effa7eb0] [c03c28ac] _dpa_rx+0x1a8/0x354 [ 892.129732] [effa7ef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108 [ 892.129742] [effa7f10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4 [ 892.129748] [effa7f40] [c03c153c] dpaa_eth_poll+0x20/0x94 [ 892.129754] [effa7f60] [c048dbd0] net_rx_action+0x13c/0x1f4 [ 892.129763] [effa7fa0] [c003d1b8] __do_softirq+0x108/0x1b0 [ 892.129769] [effa7ff0] [c000df58] call_do_softirq+0x14/0x24 [ 892.129775] [ebacfe70] [c0004868] do_softirq+0xd8/0x104 [ 892.129780] [ebacfe90] [c003d5a4] irq_exit+0xb8/0xd8 [ 892.129786] [ebacfea0] [c0004498] do_IRQ+0xa4/0x1b0 [ 892.129792] [ebacfed0] [c000fad8] ret_from_except+0x0/0x18 [ 892.129798] [ebacff90] [c0009010] cpu_idle+0x94/0xf0 [ 892.129804] [ebacffb0] [c059ff88] start_secondary+0x42c/0x430 [ 892.129809] [ebacfff0] [c0001e28] __secondary_start+0x30/0x84 [ 892.281474] [ 892.282959] [eff9fd00] [c0509724] esp_input+0x178/0x334 [ 892.288186] [eff9fd50] [c0519778] xfrm_input+0x77c/0x818 [ 892.293499] [eff9fda0] [c050e344] xfrm4_rcv_encap+0x20/0x30 [ 892.299074] [eff9fdb0] [c04b90c8] ip_local_deliver+0x190/0x408 [ 892.304907] [eff9fde0] [c04b966c] ip_rcv+0x32c/0x898 [ 892.309872] [eff9fe10] [c048b998] __netif_receive_skb+0x27c/0x4e8 [ 892.315966] [eff9fe80] [c048d744] netif_receive_skb+0x4c/0x13c [ 892.321803] [eff9feb0] [c03c28ac] _dpa_rx+0x1a8/0x354 [ 892.326855] [eff9fef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108 [ 892.333212] [eff9ff10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4 [ 892.338872] [eff9ff40] [c03c153c] dpaa_eth_poll+0x20/0x94 [ 892.344271] [eff9ff60] [c048dbd0] net_rx_action+0x13c/0x1f4 [ 892.349846] [eff9ffa0] [c003d1b8] __do_softirq+0x108/0x1b0 [ 892.355338] [eff9fff0] [c000df58] call_do_softirq+0x14/0x24 [ 892.360910] [e7169950] [c0004868] do_softirq+0xd8/0x104 [ 892.366135] [e7169970] [c003d5a4] irq_exit+0xb8/0xd8 [ 892.371101] [e7169980] [c0004498] do_IRQ+0xa4/0x1b0 [ 892.375979] [e71699b0] [c000fad8] ret_from_except+0x0/0x18 [ 892.381466] [e7169a70] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.387127] [e7169ab0] [c044ad4c] aead_givencrypt+0x6ac/0xa70 [ 892.392873] [e7169b20] [c050a0b8] esp_output+0x2b4/0x570 [ 892.398186] [e7169b80] [c0519b9c] xfrm_output_resume+0x248/0x7c0 [ 892.404194] [e7169bb0] [c050e89c] xfrm4_output_finish+0x18/0x28 [ 892.410113] [e7169bc0] [c050e8f4] xfrm4_output+0x48/0x98 [ 892.415427] [e7169bd0] [c04beac0] ip_local_out+0x48/0x98 [ 892.420740] [e7169be0] [c04bec7c] ip_queue_xmit+0x16c/0x490 [ 892.426314] [e7169c10] [c04d6128] tcp_transmit_skb+0x35c/0x9a4 [ 892.432147] [e7169c70] [c04d6f98] tcp_write_xmit+0x200/0xa04 [ 892.437808] [e7169cc0] [c04c8ccc] tcp_sendmsg+0x994/0xcec [ 892.443213] [e7169d40] [c04eebfc] inet_sendmsg+0xd0/0x164 [ 892.448617] [e7169d70] [c04792f8] sock_sendmsg+0x8c/0xbc [ 892.453931] [e7169e40] [c047aecc] sys_sendto+0xc0/0xfc [ 892.459069] [e7169f10] [c047b934] sys_socketcall+0x110/0x25c [ 892.464729] [e7169f40] [c000f480] ret_from_syscall+0x0/0x3c (b) since the caam_jr_dequeue lock is only used in bh context, then semantically it should use _bh spin_lock types. spin_lock_bh semantics are to disable back-halves, and used when a lock is shared between softirq (bh) context and process and/or h/w IRQ context. Since the lock is only used within softirq context, and this tasklet is atomic, there is no need to do the additional work to disable back halves. This patch adds back-half disabling protection to caam_jr_enqueue spin_locks to fix (a), and drops it from caam_jr_dequeue to fix (b). Signed-off-by: Kim Phillips Signed-off-by: Herbert Xu --- drivers/crypto/caam/jr.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index 53c8c51d588..93d14070141 100644 --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c @@ -63,7 +63,7 @@ static void caam_jr_dequeue(unsigned long devarg) head = ACCESS_ONCE(jrp->head); - spin_lock_bh(&jrp->outlock); + spin_lock(&jrp->outlock); sw_idx = tail = jrp->tail; hw_idx = jrp->out_ring_read_index; @@ -115,7 +115,7 @@ static void caam_jr_dequeue(unsigned long devarg) jrp->tail = tail; } - spin_unlock_bh(&jrp->outlock); + spin_unlock(&jrp->outlock); /* Finally, execute user's callback */ usercall(dev, userdesc, userstatus, userarg); @@ -236,14 +236,14 @@ int caam_jr_enqueue(struct device *dev, u32 *desc, return -EIO; } - spin_lock(&jrp->inplock); + spin_lock_bh(&jrp->inplock); head = jrp->head; tail = ACCESS_ONCE(jrp->tail); if (!rd_reg32(&jrp->rregs->inpring_avail) || CIRC_SPACE(head, tail, JOBR_DEPTH) <= 0) { - spin_unlock(&jrp->inplock); + spin_unlock_bh(&jrp->inplock); dma_unmap_single(dev, desc_dma, desc_size, DMA_TO_DEVICE); return -EBUSY; } @@ -265,7 +265,7 @@ int caam_jr_enqueue(struct device *dev, u32 *desc, wr_reg32(&jrp->rregs->inpring_jobadd, 1); - spin_unlock(&jrp->inplock); + spin_unlock_bh(&jrp->inplock); return 0; } -- cgit v1.2.3-70-g09d2 From aaf265c22e48f10c94ad04d23b6ab0c88f554d35 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:58 +0200 Subject: ALSA: sound/atmel/abdac.c: fix error return code Initialize retval before returning from a failed call to ioremap. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/atmel/abdac.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c index 98554f4882b..277ebce23a4 100644 --- a/sound/atmel/abdac.c +++ b/sound/atmel/abdac.c @@ -452,6 +452,7 @@ static int __devinit atmel_abdac_probe(struct platform_device *pdev) dac->regs = ioremap(regs->start, resource_size(regs)); if (!dac->regs) { dev_dbg(&pdev->dev, "could not remap register memory\n"); + retval = -ENOMEM; goto out_free_card; } -- cgit v1.2.3-70-g09d2 From 0c23e46eb4878422c25351ff54ab0fe80c643809 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:57 +0200 Subject: ALSA: sound/atmel/ac97c.c: fix error return code In the first case, the second test of whether retval is negative is redundant. It is dropped and the previous and subsequent tests are combined. In the second case, add an initialization of retval on failure of ioremap. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/atmel/ac97c.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index 3c8d3ba7ddf..9052aff37f6 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -278,14 +278,9 @@ static int atmel_ac97c_capture_hw_params(struct snd_pcm_substream *substream, if (retval < 0) return retval; /* snd_pcm_lib_malloc_pages returns 1 if buffer is changed. */ - if (cpu_is_at32ap7000()) { - if (retval < 0) - return retval; - /* snd_pcm_lib_malloc_pages returns 1 if buffer is changed. */ - if (retval == 1) - if (test_and_clear_bit(DMA_RX_READY, &chip->flags)) - dw_dma_cyclic_free(chip->dma.rx_chan); - } + if (cpu_is_at32ap7000() && retval == 1) + if (test_and_clear_bit(DMA_RX_READY, &chip->flags)) + dw_dma_cyclic_free(chip->dma.rx_chan); /* Set restrictions to params. */ mutex_lock(&opened_mutex); @@ -980,6 +975,7 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev) if (!chip->regs) { dev_dbg(&pdev->dev, "could not remap register memory\n"); + retval = -ENOMEM; goto err_ioremap; } -- cgit v1.2.3-70-g09d2 From 4d8ce1c9966663bad69e738952179f3cc52710bf Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:56 +0200 Subject: ALSA: sound/pci/ctxfi/ctatc.c: fix error return code Initialize err before returning on failure, as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/pci/ctxfi/ctatc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c index 8e40262d411..2f6e9c762d3 100644 --- a/sound/pci/ctxfi/ctatc.c +++ b/sound/pci/ctxfi/ctatc.c @@ -1725,8 +1725,10 @@ int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci, atc_connect_resources(atc); atc->timer = ct_timer_new(atc); - if (!atc->timer) + if (!atc->timer) { + err = -ENOMEM; goto error1; + } err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, atc, &ops); if (err < 0) -- cgit v1.2.3-70-g09d2 From ae970eb45d8a1ea4506be23c3f776225b9575d0e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:55 +0200 Subject: ALSA: sound/pci/sis7019.c: fix error return code Initialize rc before returning on failure, as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/pci/sis7019.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c index 512434efcc3..805ab6e9a78 100644 --- a/sound/pci/sis7019.c +++ b/sound/pci/sis7019.c @@ -1377,8 +1377,9 @@ static int __devinit sis_chip_create(struct snd_card *card, if (rc) goto error_out_cleanup; - if (request_irq(pci->irq, sis_interrupt, IRQF_SHARED, KBUILD_MODNAME, - sis)) { + rc = request_irq(pci->irq, sis_interrupt, IRQF_SHARED, KBUILD_MODNAME, + sis); + if (rc) { dev_err(&pci->dev, "unable to allocate irq %d\n", sis->irq); goto error_out_cleanup; } -- cgit v1.2.3-70-g09d2 From b17cbdd85f84c8323189416da6e9701d2793b0e5 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:54 +0200 Subject: ALSA: sound/pci/rme9652/hdspm.c: fix error return code Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdspm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index b8ac8710f47..b12308b5ba2 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -6585,7 +6585,7 @@ static int __devinit snd_hdspm_create(struct snd_card *card, snd_printk(KERN_ERR "HDSPM: " "unable to kmalloc Mixer memory of %d Bytes\n", (int)sizeof(struct hdspm_mixer)); - return err; + return -ENOMEM; } hdspm->port_names_in = NULL; -- cgit v1.2.3-70-g09d2 From c86b93628e5649fd7bb0574b570a51b2b02d586c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:59 +0200 Subject: ALSA: sound/ppc/snd_ps3.c: fix error return code Initialize ret before returning on failure, as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/ppc/snd_ps3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c index 1aa52eff526..9b18b5243a5 100644 --- a/sound/ppc/snd_ps3.c +++ b/sound/ppc/snd_ps3.c @@ -1040,6 +1040,7 @@ static int __devinit snd_ps3_driver_probe(struct ps3_system_bus_device *dev) GFP_KERNEL); if (!the_card.null_buffer_start_vaddr) { pr_info("%s: nullbuffer alloc failed\n", __func__); + ret = -ENOMEM; goto clean_preallocate; } pr_debug("%s: null vaddr=%p dma=%#llx\n", __func__, -- cgit v1.2.3-70-g09d2 From 3296193d1421c2d6f9e49e181cecfd917f0f5764 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 14 Aug 2012 13:20:23 +0000 Subject: dt: introduce for_each_available_child_of_node, of_get_next_available_child Macro for_each_child_of_node() makes it easy to iterate over all of the children for a given device tree node, including those nodes that are marked as unavailable (i.e. status = "disabled"). Introduce for_each_available_child_of_node(), which is like for_each_child_of_node(), but it automatically skips unavailable nodes. This also requires the introduction of helper function of_get_next_available_child(), which returns the next available child node. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/of/base.c | 27 +++++++++++++++++++++++++++ include/linux/of.h | 7 +++++++ 2 files changed, 34 insertions(+) diff --git a/drivers/of/base.c b/drivers/of/base.c index c181b94abc3..d4a1c9a043e 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -363,6 +363,33 @@ struct device_node *of_get_next_child(const struct device_node *node, } EXPORT_SYMBOL(of_get_next_child); +/** + * of_get_next_available_child - Find the next available child node + * @node: parent node + * @prev: previous child of the parent node, or NULL to get first + * + * This function is like of_get_next_child(), except that it + * automatically skips any disabled nodes (i.e. status = "disabled"). + */ +struct device_node *of_get_next_available_child(const struct device_node *node, + struct device_node *prev) +{ + struct device_node *next; + + read_lock(&devtree_lock); + next = prev ? prev->sibling : node->child; + for (; next; next = next->sibling) { + if (!of_device_is_available(next)) + continue; + if (of_node_get(next)) + break; + } + of_node_put(prev); + read_unlock(&devtree_lock); + return next; +} +EXPORT_SYMBOL(of_get_next_available_child); + /** * of_find_node_by_path - Find a node matching a full OF path * @path: The full path to match diff --git a/include/linux/of.h b/include/linux/of.h index 5919ee33f2b..1b1163225f3 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -190,10 +190,17 @@ extern struct device_node *of_get_parent(const struct device_node *node); extern struct device_node *of_get_next_parent(struct device_node *node); extern struct device_node *of_get_next_child(const struct device_node *node, struct device_node *prev); +extern struct device_node *of_get_next_available_child( + const struct device_node *node, struct device_node *prev); + #define for_each_child_of_node(parent, child) \ for (child = of_get_next_child(parent, NULL); child != NULL; \ child = of_get_next_child(parent, child)) +#define for_each_available_child_of_node(parent, child) \ + for (child = of_get_next_available_child(parent, NULL); child != NULL; \ + child = of_get_next_available_child(parent, child)) + static inline int of_get_child_count(const struct device_node *np) { struct device_node *child; -- cgit v1.2.3-70-g09d2 From 61abcb7b058853900a3092f2c21988a444e3aaea Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 14 Aug 2012 13:20:24 +0000 Subject: netdev/phy: skip disabled mdio-mux nodes The mdio-mux driver scans all child mdio nodes, without regard to whether the node is actually used. Some device trees include all possible mdio-mux nodes and rely on the boot loader to disable those that are not present, based on some run-time configuration. Those nodes need to be skipped. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/phy/mdio-mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c index 5c120189ec8..4d4d25efc1e 100644 --- a/drivers/net/phy/mdio-mux.c +++ b/drivers/net/phy/mdio-mux.c @@ -132,7 +132,7 @@ int mdio_mux_init(struct device *dev, pb->mii_bus = parent_bus; ret_val = -ENODEV; - for_each_child_of_node(dev->of_node, child_bus_node) { + for_each_available_child_of_node(dev->of_node, child_bus_node) { u32 v; r = of_property_read_u32(child_bus_node, "reg", &v); -- cgit v1.2.3-70-g09d2 From d0418bb7123f44b23d69ac349eec7daf9103472f Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Tue, 14 Aug 2012 20:33:29 +0000 Subject: net: sh_eth: Add eth support for R8A7779 device Signed-off-by: Phil Edworthy Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/Kconfig | 4 ++-- drivers/net/ethernet/renesas/sh_eth.c | 11 ++++++++--- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig index 46df3a04030..24c2305d794 100644 --- a/drivers/net/ethernet/renesas/Kconfig +++ b/drivers/net/ethernet/renesas/Kconfig @@ -8,7 +8,7 @@ config SH_ETH (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \ CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \ CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7734 || \ - CPU_SUBTYPE_SH7757 || ARCH_R8A7740) + CPU_SUBTYPE_SH7757 || ARCH_R8A7740 || ARCH_R8A7779) select CRC32 select NET_CORE select MII @@ -18,4 +18,4 @@ config SH_ETH Renesas SuperH Ethernet device driver. This driver supporting CPUs are: - SH7619, SH7710, SH7712, SH7724, SH7734, SH7763, SH7757, - and R8A7740. + R8A7740 and R8A7779. diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index af0b867a6cf..bad8f2eec9b 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -78,7 +78,7 @@ static void sh_eth_select_mii(struct net_device *ndev) #endif /* There is CPU dependent code */ -#if defined(CONFIG_CPU_SUBTYPE_SH7724) +#if defined(CONFIG_CPU_SUBTYPE_SH7724) || defined(CONFIG_ARCH_R8A7779) #define SH_ETH_RESET_DEFAULT 1 static void sh_eth_set_duplex(struct net_device *ndev) { @@ -93,13 +93,18 @@ static void sh_eth_set_duplex(struct net_device *ndev) static void sh_eth_set_rate(struct net_device *ndev) { struct sh_eth_private *mdp = netdev_priv(ndev); + unsigned int bits = ECMR_RTM; + +#if defined(CONFIG_ARCH_R8A7779) + bits |= ECMR_ELB; +#endif switch (mdp->speed) { case 10: /* 10BASE */ - sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~ECMR_RTM, ECMR); + sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~bits, ECMR); break; case 100:/* 100BASE */ - sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | ECMR_RTM, ECMR); + sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | bits, ECMR); break; default: break; -- cgit v1.2.3-70-g09d2 From 10cbc1d97a7c7f9ae862fffe27b771ef0da9c461 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Wed, 15 Aug 2012 03:42:57 +0000 Subject: net: qmi_wwan: new devices: UML290 and K5006-Z MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Newer firmware versions for the Pantech UML290 use a different subclass ID. The Windows driver match on both IDs, so we do that as well. The ZTE (Vodafone) K5006-Z is a new device. Cc: Dan Williams Cc: Thomas Schäfer Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index aaa061b7355..328397c6673 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -373,6 +373,10 @@ static const struct usb_device_id products[] = { USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), .driver_info = (unsigned long)&qmi_wwan_shared, }, + { /* Pantech UML290 - newer firmware */ + USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), + .driver_info = (unsigned long)&qmi_wwan_shared, + }, /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */ @@ -382,6 +386,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1018, 3)}, /* ZTE (Vodafone) K5006-Z */ {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ -- cgit v1.2.3-70-g09d2 From b3f0db1c772ca8f08feabe9d2636dcc1103c5cb8 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Wed, 15 Aug 2012 21:53:38 +0000 Subject: smsc75xx: add missing entry to MAINTAINERS Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index f8758907555..560bd30b1d7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7289,6 +7289,12 @@ W: http://www.connecttech.com S: Supported F: drivers/usb/serial/whiteheat* +USB SMSC75XX ETHERNET DRIVER +M: Steve Glendinning +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/usb/smsc75xx.* + USB SMSC95XX ETHERNET DRIVER M: Steve Glendinning L: netdev@vger.kernel.org -- cgit v1.2.3-70-g09d2 From 82a820e8d75f7f3fcd1af24609da79d7d89d5450 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 16 Aug 2012 21:46:56 +0000 Subject: drivers/net/wimax/i2400m/fw.c: fix error return code Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ if (ret < 0) { ... return ret; } ... when != ret = e1 when forall *if(...) { ... when != ret = e2 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/wimax/i2400m/fw.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index 283237f6f07..def12b38cbf 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -326,8 +326,10 @@ int i2400m_barker_db_init(const char *_options) unsigned barker; options_orig = kstrdup(_options, GFP_KERNEL); - if (options_orig == NULL) + if (options_orig == NULL) { + result = -ENOMEM; goto error_parse; + } options = options_orig; while ((token = strsep(&options, ",")) != NULL) { -- cgit v1.2.3-70-g09d2 From 623d896b361f404de5ed24e312a58646ee04207d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 16 Aug 2012 21:46:57 +0000 Subject: drivers/net/wan/dscc4.c: fix error return code Move up the initialization of rc so that failure of pci_alloc_consistent returns -ENOMEM as well. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ if (ret < 0) { ... return ret; } ... when != ret = e1 when forall *if(...) { ... when != ret = e2 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/wan/dscc4.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 9eb6479306d..ef36cafd44b 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -774,14 +774,15 @@ static int __devinit dscc4_init_one(struct pci_dev *pdev, } /* Global interrupt queue */ writel((u32)(((IRQ_RING_SIZE >> 5) - 1) << 20), ioaddr + IQLENR1); + + rc = -ENOMEM; + priv->iqcfg = (__le32 *) pci_alloc_consistent(pdev, IRQ_RING_SIZE*sizeof(__le32), &priv->iqcfg_dma); if (!priv->iqcfg) goto err_free_irq_5; writel(priv->iqcfg_dma, ioaddr + IQCFG); - rc = -ENOMEM; - /* * SCC 0-3 private rx/tx irq structures * IQRX/TXi needs to be set soon. Learned it the hard way... -- cgit v1.2.3-70-g09d2 From 9915e67eb1134b4710a4888a3e041c757869e0e2 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 16 Aug 2012 21:46:58 +0000 Subject: drivers/net/irda: fix error return code Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ if (ret < 0) { ... return ret; } ... when != ret = e1 when forall *if(...) { ... when != ret = e2 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/irda/ks959-sir.c | 1 + drivers/net/irda/ksdazzle-sir.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c index 824e2a93fe8..5f3aeac3f86 100644 --- a/drivers/net/irda/ks959-sir.c +++ b/drivers/net/irda/ks959-sir.c @@ -542,6 +542,7 @@ static int ks959_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { + err = -ENOMEM; dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c index 5a278ab83c2..2d4b6a1ab20 100644 --- a/drivers/net/irda/ksdazzle-sir.c +++ b/drivers/net/irda/ksdazzle-sir.c @@ -436,6 +436,7 @@ static int ksdazzle_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { + err = -ENOMEM; dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } -- cgit v1.2.3-70-g09d2 From c41999a23929f30808bae6009d8065052d4d73fd Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 20 Aug 2012 11:17:00 +0200 Subject: ALSA: hda - don't create dysfunctional mixer controls for ca0132 It's possible that these amps are settable somehow, e g through secret codec verbs, but for now, don't create the controls (as they won't be working anyway, and cause errors in amixer). Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1038651 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 9c0ec0a55be..49750a96d64 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -275,6 +275,10 @@ static int _add_switch(struct hda_codec *codec, hda_nid_t nid, const char *pfx, int type = dir ? HDA_INPUT : HDA_OUTPUT; struct snd_kcontrol_new knew = HDA_CODEC_MUTE_MONO(namestr, nid, chan, 0, type); + if ((query_amp_caps(codec, nid, type) & AC_AMPCAP_MUTE) == 0) { + snd_printdd("Skipping '%s %s Switch' (no mute on node 0x%x)\n", pfx, dirstr[dir], nid); + return 0; + } sprintf(namestr, "%s %s Switch", pfx, dirstr[dir]); return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec)); } @@ -286,6 +290,10 @@ static int _add_volume(struct hda_codec *codec, hda_nid_t nid, const char *pfx, int type = dir ? HDA_INPUT : HDA_OUTPUT; struct snd_kcontrol_new knew = HDA_CODEC_VOLUME_MONO(namestr, nid, chan, 0, type); + if ((query_amp_caps(codec, nid, type) & AC_AMPCAP_NUM_STEPS) == 0) { + snd_printdd("Skipping '%s %s Volume' (no amp on node 0x%x)\n", pfx, dirstr[dir], nid); + return 0; + } sprintf(namestr, "%s %s Volume", pfx, dirstr[dir]); return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec)); } -- cgit v1.2.3-70-g09d2 From c0de08d04215031d68fa13af36f347a6cfa252ca Mon Sep 17 00:00:00 2001 From: Eric Leblond Date: Thu, 16 Aug 2012 22:02:58 +0000 Subject: af_packet: don't emit packet on orig fanout group If a packet is emitted on one socket in one group of fanout sockets, it is transmitted again. It is thus read again on one of the sockets of the fanout group. This result in a loop for software which generate packets when receiving one. This retransmission is not the intended behavior: a fanout group must behave like a single socket. The packet should not be transmitted on a socket if it originates from a socket belonging to the same fanout group. This patch fixes the issue by changing the transmission check to take fanout group info account. Reported-by: Aleksandr Kotov Signed-off-by: Eric Leblond Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 ++ net/core/dev.c | 16 ++++++++++++++-- net/packet/af_packet.c | 9 +++++++++ 3 files changed, 25 insertions(+), 2 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3560d688161..59dc05f3824 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1522,6 +1522,8 @@ struct packet_type { struct sk_buff **(*gro_receive)(struct sk_buff **head, struct sk_buff *skb); int (*gro_complete)(struct sk_buff *skb); + bool (*id_match)(struct packet_type *ptype, + struct sock *sk); void *af_packet_priv; struct list_head list; }; diff --git a/net/core/dev.c b/net/core/dev.c index a39354ee143..debd9372472 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1642,6 +1642,19 @@ static inline int deliver_skb(struct sk_buff *skb, return pt_prev->func(skb, skb->dev, pt_prev, orig_dev); } +static inline bool skb_loop_sk(struct packet_type *ptype, struct sk_buff *skb) +{ + if (ptype->af_packet_priv == NULL) + return false; + + if (ptype->id_match) + return ptype->id_match(ptype, skb->sk); + else if ((struct sock *)ptype->af_packet_priv == skb->sk) + return true; + + return false; +} + /* * Support routine. Sends outgoing frames to any network * taps currently in use. @@ -1659,8 +1672,7 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev) * they originated from - MvS (miquels@drinkel.ow.org) */ if ((ptype->dev == dev || !ptype->dev) && - (ptype->af_packet_priv == NULL || - (struct sock *)ptype->af_packet_priv != skb->sk)) { + (!skb_loop_sk(ptype, skb))) { if (pt_prev) { deliver_skb(skb2, pt_prev, skb->dev); pt_prev = ptype; diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 8ac890a1a4c..aee7196aac3 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1273,6 +1273,14 @@ static void __fanout_unlink(struct sock *sk, struct packet_sock *po) spin_unlock(&f->lock); } +bool match_fanout_group(struct packet_type *ptype, struct sock * sk) +{ + if (ptype->af_packet_priv == (void*)((struct packet_sock *)sk)->fanout) + return true; + + return false; +} + static int fanout_add(struct sock *sk, u16 id, u16 type_flags) { struct packet_sock *po = pkt_sk(sk); @@ -1325,6 +1333,7 @@ static int fanout_add(struct sock *sk, u16 id, u16 type_flags) match->prot_hook.dev = po->prot_hook.dev; match->prot_hook.func = packet_rcv_fanout; match->prot_hook.af_packet_priv = match; + match->prot_hook.id_match = match_fanout_group; dev_add_pack(&match->prot_hook); list_add(&match->list, &fanout_list); } -- cgit v1.2.3-70-g09d2 From d92c7f8aabae913de16eb855b19cd2002c341896 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Fri, 17 Aug 2012 10:33:12 +0000 Subject: caif: Do not dereference NULL in chnl_recv_cb() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In net/caif/chnl_net.c::chnl_recv_cb() we call skb_header_pointer() which may return NULL, but we do not check for a NULL pointer before dereferencing it. This patch adds such a NULL check and properly free's allocated memory and return an error (-EINVAL) on failure - much better than crashing.. Signed-off-by: Jesper Juhl Acked-by: Sjur Brændeland Signed-off-by: David S. Miller --- net/caif/chnl_net.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/caif/chnl_net.c b/net/caif/chnl_net.c index 69771c04ba8..e597733affb 100644 --- a/net/caif/chnl_net.c +++ b/net/caif/chnl_net.c @@ -94,6 +94,10 @@ static int chnl_recv_cb(struct cflayer *layr, struct cfpkt *pkt) /* check the version of IP */ ip_version = skb_header_pointer(skb, 0, 1, &buf); + if (!ip_version) { + kfree_skb(skb); + return -EINVAL; + } switch (*ip_version >> 4) { case 4: -- cgit v1.2.3-70-g09d2 From ae4d8cf299dbea4ce387a01da6f723c4050b31a7 Mon Sep 17 00:00:00 2001 From: Kelvin Cheung Date: Sat, 18 Aug 2012 00:16:23 +0000 Subject: net/stmmac: fix issue of clk_get for Loongson1B. When getting clock, give a chance to the CPUs without DT support, which use Common Clock Framework, such as Loongson1B. Signed-off-by: Kelvin Cheung Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index fd8882f9602..c136162e647 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2077,7 +2077,7 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, goto error_netdev_register; } - priv->stmmac_clk = clk_get(priv->device, NULL); + priv->stmmac_clk = clk_get(priv->device, STMMAC_RESOURCE_NAME); if (IS_ERR(priv->stmmac_clk)) { pr_warning("%s: warning: cannot get CSR clock\n", __func__); goto error_clk_get; -- cgit v1.2.3-70-g09d2 From 9d7b0fc1ef1f17aff57c0dc9a59453d8fca255c3 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 20 Aug 2012 02:56:56 -0700 Subject: net: ipv6: fix oops in inet_putpeer() Commit 97bab73f (inet: Hide route peer accesses behind helpers.) introduced a bug in xfrm6_policy_destroy(). The xfrm_dst's _rt6i_peer member is not initialized, causing a false positive result from inetpeer_ptr_is_peer(), which in turn causes a NULL pointer dereference in inet_putpeer(). Pid: 314, comm: kworker/0:1 Not tainted 3.6.0-rc1+ #17 To Be Filled By O.E.M. To Be Filled By O.E.M./P4S800D-X EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at inet_putpeer+0xe/0x16 EAX: 00000000 EBX: f3481700 ECX: 00000000 EDX: 000dd641 ESI: f3481700 EDI: c05e949c EBP: f551def4 ESP: f551def4 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000070 CR3: 3243d000 CR4: 00000750 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 f551df04 c0423de1 00000000 f3481700 f551df18 c038d5f7 f254b9f8 f551df28 f34f85d8 f551df20 c03ef48d f551df3c c0396870 f30697e8 f24e1738 c05e98f4 f5509540 c05cd2b4 f551df7c c0142d2b c043feb5 f5509540 00000000 c05cd2e8 [] xfrm6_dst_destroy+0x42/0xdb [] dst_destroy+0x1d/0xa4 [] xfrm_bundle_flo_delete+0x2b/0x36 [] flow_cache_gc_task+0x85/0x9f [] process_one_work+0x122/0x441 [] ? apic_timer_interrupt+0x31/0x38 [] ? flow_cache_new_hashrnd+0x2b/0x2b [] worker_thread+0x113/0x3cc Fix by adding a init_dst() callback to struct xfrm_policy_afinfo to properly initialize the dst's peer pointer. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/net/xfrm.h | 2 ++ net/ipv6/xfrm6_policy.c | 8 ++++++++ net/xfrm/xfrm_policy.c | 2 ++ 3 files changed, 12 insertions(+) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 62b619e82a9..976a81abe1a 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -292,6 +292,8 @@ struct xfrm_policy_afinfo { struct flowi *fl, int reverse); int (*get_tos)(const struct flowi *fl); + void (*init_dst)(struct net *net, + struct xfrm_dst *dst); int (*init_path)(struct xfrm_dst *path, struct dst_entry *dst, int nfheader_len); diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index ef39812107b..f8c4c08ffb6 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -73,6 +73,13 @@ static int xfrm6_get_tos(const struct flowi *fl) return 0; } +static void xfrm6_init_dst(struct net *net, struct xfrm_dst *xdst) +{ + struct rt6_info *rt = (struct rt6_info *)xdst; + + rt6_init_peer(rt, net->ipv6.peers); +} + static int xfrm6_init_path(struct xfrm_dst *path, struct dst_entry *dst, int nfheader_len) { @@ -286,6 +293,7 @@ static struct xfrm_policy_afinfo xfrm6_policy_afinfo = { .get_saddr = xfrm6_get_saddr, .decode_session = _decode_session6, .get_tos = xfrm6_get_tos, + .init_dst = xfrm6_init_dst, .init_path = xfrm6_init_path, .fill_dst = xfrm6_fill_dst, .blackhole_route = ip6_blackhole_route, diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index c5a5165a592..5a2aa17e4d3 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1357,6 +1357,8 @@ static inline struct xfrm_dst *xfrm_alloc_dst(struct net *net, int family) memset(dst + 1, 0, sizeof(*xdst) - sizeof(*dst)); xdst->flo.ops = &xfrm_bundle_fc_ops; + if (afinfo->init_dst) + afinfo->init_dst(net, xdst); } else xdst = ERR_PTR(-ENOBUFS); -- cgit v1.2.3-70-g09d2 From b817bf5c72774556345a9043c6b0c497cdcb7295 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 16 Aug 2012 08:01:21 +0200 Subject: pwm: Improve Kconfig help text The Kconfig help text should help the user understand what functionality is provided by an option. This is especially true for new subsystems. An improved help text is provided by this commit in the hopes of clarifying the usefulness of the PWM framework. Signed-off-by: Thierry Reding Acked-by: Borislav Petkov --- drivers/pwm/Kconfig | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 8fc3808d7a3..90c5c7357a5 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -1,12 +1,31 @@ menuconfig PWM - bool "PWM Support" + bool "Pulse-Width Modulation (PWM) Support" depends on !MACH_JZ4740 && !PUV3_PWM help - This enables PWM support through the generic PWM framework. - You only need to enable this, if you also want to enable - one or more of the PWM drivers below. - - If unsure, say N. + Generic Pulse-Width Modulation (PWM) support. + + In Pulse-Width Modulation, a variation of the width of pulses + in a rectangular pulse signal is used as a means to alter the + average power of the signal. Applications include efficient + power delivery and voltage regulation. In computer systems, + PWMs are commonly used to control fans or the brightness of + display backlights. + + This framework provides a generic interface to PWM devices + within the Linux kernel. On the driver side it provides an API + to register and unregister a PWM chip, an abstraction of a PWM + controller, that supports one or more PWM devices. Client + drivers can request PWM devices and use the generic framework + to configure as well as enable and disable them. + + This generic framework replaces the legacy PWM framework which + allows only a single driver implementing the required API. Not + all legacy implementations have been ported to the framework + yet. The framework provides an API that is backward compatible + with the legacy framework so that existing client drivers + continue to work as expected. + + If unsure, say no. if PWM -- cgit v1.2.3-70-g09d2 From 72d3eb13b5c0abe7d63efac41f39c5b644c7bbaa Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Sat, 18 Aug 2012 07:02:20 +0000 Subject: netconsole: remove a redundant netconsole_target_put() This netconsole_target_put() is obviously redundant, and it causes a kernel segfault when removing a bridge device which has netconsole running on it. This is caused by: commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093 Author: Amerigo Wang Date: Thu May 19 21:39:10 2011 +0000 netpoll: disable netpoll when enslave a device Cc: David Miller (for all 3.x stable releases) Cc: stable@vger.kernel.org Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/netconsole.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index f0ad56c1393..b3321129a83 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -643,7 +643,6 @@ static int netconsole_netdev_event(struct notifier_block *this, __netpoll_cleanup(&nt->np); dev_put(nt->np.dev); nt->np.dev = NULL; - netconsole_target_put(nt); } nt->enabled = 0; stopped = true; -- cgit v1.2.3-70-g09d2 From 3de7a37b02f607716753dc669c1dca4f71db08fc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 18 Aug 2012 14:36:44 +0000 Subject: net/core/dev.c: fix kernel-doc warning Fix kernel-doc warning: Warning(net/core/dev.c:5745): No description found for parameter 'dev' Signed-off-by: Randy Dunlap Cc: "David S. Miller" Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- net/core/dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/dev.c b/net/core/dev.c index debd9372472..83988362805 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5744,6 +5744,7 @@ EXPORT_SYMBOL(netdev_refcnt_read); /** * netdev_wait_allrefs - wait until all references are gone. + * @dev: target net_device * * This is called when unregistering network devices. * -- cgit v1.2.3-70-g09d2 From fae6ef87faeb8853896920c68ee703d715799d28 Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Sun, 19 Aug 2012 03:30:38 +0000 Subject: net: tcp: move sk_rx_dst_set call after tcp_create_openreq_child() This commit removes the sk_rx_dst_set calls from tcp_create_openreq_child(), because at that point the icsk_af_ops field of ipv6_mapped TCP sockets has not been set to its proper final value. Instead, to make sure we get the right sk_rx_dst_set variant appropriate for the address family of the new connection, we have tcp_v{4,6}_syn_recv_sock() directly call the appropriate function shortly after the call to tcp_create_openreq_child() returns. This also moves inet6_sk_rx_dst_set() to avoid a forward declaration with the new approach. Signed-off-by: Neal Cardwell Reported-by: Artem Savkov Cc: Eric Dumazet Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 1 + net/ipv4/tcp_minisocks.c | 2 -- net/ipv6/tcp_ipv6.c | 25 +++++++++++++------------ 3 files changed, 14 insertions(+), 14 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 76782376401..5bf2040b25b 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1462,6 +1462,7 @@ struct sock *tcp_v4_syn_recv_sock(struct sock *sk, struct sk_buff *skb, goto exit_nonewsk; newsk->sk_gso_type = SKB_GSO_TCPV4; + inet_sk_rx_dst_set(newsk, skb); newtp = tcp_sk(newsk); newinet = inet_sk(newsk); diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index d9c9dcef2de..6ff7f10dce9 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -387,8 +387,6 @@ struct sock *tcp_create_openreq_child(struct sock *sk, struct request_sock *req, struct tcp_sock *oldtp = tcp_sk(sk); struct tcp_cookie_values *oldcvp = oldtp->cookie_values; - newicsk->icsk_af_ops->sk_rx_dst_set(newsk, skb); - /* TCP Cookie Transactions require space for the cookie pair, * as it differs for each connection. There is no need to * copy any s_data_payload stored at the original socket. diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index bb9ce2b2f37..a3e60cc04a8 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -94,6 +94,18 @@ static struct tcp_md5sig_key *tcp_v6_md5_do_lookup(struct sock *sk, } #endif +static void inet6_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb) +{ + struct dst_entry *dst = skb_dst(skb); + const struct rt6_info *rt = (const struct rt6_info *)dst; + + dst_hold(dst); + sk->sk_rx_dst = dst; + inet_sk(sk)->rx_dst_ifindex = skb->skb_iif; + if (rt->rt6i_node) + inet6_sk(sk)->rx_dst_cookie = rt->rt6i_node->fn_sernum; +} + static void tcp_v6_hash(struct sock *sk) { if (sk->sk_state != TCP_CLOSE) { @@ -1270,6 +1282,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb, newsk->sk_gso_type = SKB_GSO_TCPV6; __ip6_dst_store(newsk, dst, NULL, NULL); + inet6_sk_rx_dst_set(newsk, skb); newtcp6sk = (struct tcp6_sock *)newsk; inet_sk(newsk)->pinet6 = &newtcp6sk->inet6; @@ -1729,18 +1742,6 @@ static struct timewait_sock_ops tcp6_timewait_sock_ops = { .twsk_destructor= tcp_twsk_destructor, }; -static void inet6_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb) -{ - struct dst_entry *dst = skb_dst(skb); - const struct rt6_info *rt = (const struct rt6_info *)dst; - - dst_hold(dst); - sk->sk_rx_dst = dst; - inet_sk(sk)->rx_dst_ifindex = skb->skb_iif; - if (rt->rt6i_node) - inet6_sk(sk)->rx_dst_cookie = rt->rt6i_node->fn_sernum; -} - static const struct inet_connection_sock_af_ops ipv6_specific = { .queue_xmit = inet6_csk_xmit, .send_check = tcp_v6_send_check, -- cgit v1.2.3-70-g09d2 From 5efcc76c13a745f98e7b6604d6aca49761be1970 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 17 Aug 2012 14:40:04 -0400 Subject: drm/radeon: avoid turning off spread spectrum for used pll If spread spectrum is enabled and in use for a given pll we should not turn it off as it will lead to turning off display for crtc that use the pll (this behavior was observed on chelsea edp). Signed-off-by: Jerome Glisse Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios_crtc.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index c6fcb5b86a4..cb18813c7df 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -444,11 +444,28 @@ union atom_enable_ss { static void atombios_crtc_program_ss(struct radeon_device *rdev, int enable, int pll_id, + int crtc_id, struct radeon_atom_ss *ss) { + unsigned i; int index = GetIndexIntoMasterTable(COMMAND, EnableSpreadSpectrumOnPPLL); union atom_enable_ss args; + if (!enable) { + for (i = 0; i < 6; i++) { + if (rdev->mode_info.crtcs[i] && + rdev->mode_info.crtcs[i]->enabled && + i != crtc_id && + pll_id == rdev->mode_info.crtcs[i]->pll_id) { + /* one other crtc is using this pll don't turn + * off spread spectrum as it might turn off + * display on active crtc + */ + return; + } + } + } + memset(&args, 0, sizeof(args)); if (ASIC_IS_DCE5(rdev)) { @@ -1028,7 +1045,7 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, &ref_div, &post_div); - atombios_crtc_program_ss(rdev, ATOM_DISABLE, radeon_crtc->pll_id, &ss); + atombios_crtc_program_ss(rdev, ATOM_DISABLE, radeon_crtc->pll_id, radeon_crtc->crtc_id, &ss); atombios_crtc_program_pll(crtc, radeon_crtc->crtc_id, radeon_crtc->pll_id, encoder_mode, radeon_encoder->encoder_id, mode->clock, @@ -1051,7 +1068,7 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode ss.step = step_size; } - atombios_crtc_program_ss(rdev, ATOM_ENABLE, radeon_crtc->pll_id, &ss); + atombios_crtc_program_ss(rdev, ATOM_ENABLE, radeon_crtc->pll_id, radeon_crtc->crtc_id, &ss); } } @@ -1572,11 +1589,11 @@ void radeon_atom_disp_eng_pll_init(struct radeon_device *rdev) ASIC_INTERNAL_SS_ON_DCPLL, rdev->clock.default_dispclk); if (ss_enabled) - atombios_crtc_program_ss(rdev, ATOM_DISABLE, ATOM_DCPLL, &ss); + atombios_crtc_program_ss(rdev, ATOM_DISABLE, ATOM_DCPLL, -1, &ss); /* XXX: DCE5, make sure voltage, dispclk is high enough */ atombios_crtc_set_disp_eng_pll(rdev, rdev->clock.default_dispclk); if (ss_enabled) - atombios_crtc_program_ss(rdev, ATOM_ENABLE, ATOM_DCPLL, &ss); + atombios_crtc_program_ss(rdev, ATOM_ENABLE, ATOM_DCPLL, -1, &ss); } } -- cgit v1.2.3-70-g09d2 From 48c0ac9911839daf188e4a0b6b132ac31050a241 Mon Sep 17 00:00:00 2001 From: Christian König Date: Mon, 20 Aug 2012 15:38:47 +0200 Subject: drm/radeon: init lockup timeout on ring init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reset the lockup timeout on ring (re-)initialisation. Otherwise we get error messages like this on gpu resets: [ 1559.949177] radeon 0000:01:00.0: GPU lockup CP stall for more than 1482270msec Signed-off-by: Christian König cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer --- drivers/gpu/drm/radeon/radeon_ring.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index ec79b375043..43c431a2686 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -706,6 +706,7 @@ int radeon_ring_init(struct radeon_device *rdev, struct radeon_ring *ring, unsig if (radeon_debugfs_ring_init(rdev, ring)) { DRM_ERROR("Failed to register debugfs file for rings !\n"); } + radeon_ring_lockup_update(ring); return 0; } -- cgit v1.2.3-70-g09d2 From c116cc94969447f44fd7205a027084ceebe90d34 Mon Sep 17 00:00:00 2001 From: Marek Olšák Date: Sun, 19 Aug 2012 02:22:09 +0200 Subject: drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MSAA is impossible without them. Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher Reviewed-by: Jerome Glisse --- drivers/gpu/drm/radeon/r600_cs.c | 94 +++++++++++++++++++++++++++++++----- drivers/gpu/drm/radeon/r600d.h | 17 +++++++ drivers/gpu/drm/radeon/radeon_drv.c | 3 +- drivers/gpu/drm/radeon/reg_srcs/r600 | 8 --- 4 files changed, 101 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 3dab49cb1d4..1bec5b8bba1 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -47,13 +47,17 @@ struct r600_cs_track { u32 npipes; /* value we track */ u32 sq_config; + u32 log_nsamples; u32 nsamples; u32 cb_color_base_last[8]; struct radeon_bo *cb_color_bo[8]; u64 cb_color_bo_mc[8]; - u32 cb_color_bo_offset[8]; - struct radeon_bo *cb_color_frag_bo[8]; /* unused */ - struct radeon_bo *cb_color_tile_bo[8]; /* unused */ + u64 cb_color_bo_offset[8]; + struct radeon_bo *cb_color_frag_bo[8]; + u64 cb_color_frag_offset[8]; + struct radeon_bo *cb_color_tile_bo[8]; + u64 cb_color_tile_offset[8]; + u32 cb_color_mask[8]; u32 cb_color_info[8]; u32 cb_color_view[8]; u32 cb_color_size_idx[8]; /* unused */ @@ -349,10 +353,6 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) unsigned array_mode; u32 format; - if (G_0280A0_TILE_MODE(track->cb_color_info[i])) { - dev_warn(p->dev, "FMASK or CMASK buffer are not supported by this kernel\n"); - return -EINVAL; - } size = radeon_bo_size(track->cb_color_bo[i]) - track->cb_color_bo_offset[i]; format = G_0280A0_FORMAT(track->cb_color_info[i]); if (!r600_fmt_is_valid_color(format)) { @@ -441,7 +441,7 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) * broken userspace. */ } else { - dev_warn(p->dev, "%s offset[%d] %d %d %d %lu too big (%d %d) (%d %d %d)\n", + dev_warn(p->dev, "%s offset[%d] %d %llu %d %lu too big (%d %d) (%d %d %d)\n", __func__, i, array_mode, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i]), @@ -458,6 +458,51 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) tmp = S_028060_PITCH_TILE_MAX((pitch / 8) - 1) | S_028060_SLICE_TILE_MAX(slice_tile_max - 1); ib[track->cb_color_size_idx[i]] = tmp; + + /* FMASK/CMASK */ + switch (G_0280A0_TILE_MODE(track->cb_color_info[i])) { + case V_0280A0_TILE_DISABLE: + break; + case V_0280A0_FRAG_ENABLE: + if (track->nsamples > 1) { + uint32_t tile_max = G_028100_FMASK_TILE_MAX(track->cb_color_mask[i]); + /* the tile size is 8x8, but the size is in units of bits. + * for bytes, do just * 8. */ + uint32_t bytes = track->nsamples * track->log_nsamples * 8 * (tile_max + 1); + + if (bytes + track->cb_color_frag_offset[i] > + radeon_bo_size(track->cb_color_frag_bo[i])) { + dev_warn(p->dev, "%s FMASK_TILE_MAX too large " + "(tile_max=%u, bytes=%u, offset=%llu, bo_size=%lu)\n", + __func__, tile_max, bytes, + track->cb_color_frag_offset[i], + radeon_bo_size(track->cb_color_frag_bo[i])); + return -EINVAL; + } + } + /* fall through */ + case V_0280A0_CLEAR_ENABLE: + { + uint32_t block_max = G_028100_CMASK_BLOCK_MAX(track->cb_color_mask[i]); + /* One block = 128x128 pixels, one 8x8 tile has 4 bits.. + * (128*128) / (8*8) / 2 = 128 bytes per block. */ + uint32_t bytes = (block_max + 1) * 128; + + if (bytes + track->cb_color_tile_offset[i] > + radeon_bo_size(track->cb_color_tile_bo[i])) { + dev_warn(p->dev, "%s CMASK_BLOCK_MAX too large " + "(block_max=%u, bytes=%u, offset=%llu, bo_size=%lu)\n", + __func__, block_max, bytes, + track->cb_color_tile_offset[i], + radeon_bo_size(track->cb_color_tile_bo[i])); + return -EINVAL; + } + break; + } + default: + dev_warn(p->dev, "%s invalid tile mode\n", __func__); + return -EINVAL; + } return 0; } @@ -1231,6 +1276,7 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) break; case R_028C04_PA_SC_AA_CONFIG: tmp = G_028C04_MSAA_NUM_SAMPLES(radeon_get_ib_value(p, idx)); + track->log_nsamples = tmp; track->nsamples = 1 << tmp; track->cb_dirty = true; break; @@ -1312,16 +1358,21 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) dev_err(p->dev, "Broken old userspace ? no cb_color0_base supplied before trying to write 0x%08X\n", reg); return -EINVAL; } - ib[idx] = track->cb_color_base_last[tmp]; track->cb_color_frag_bo[tmp] = track->cb_color_bo[tmp]; + track->cb_color_frag_offset[tmp] = track->cb_color_bo_offset[tmp]; + ib[idx] = track->cb_color_base_last[tmp]; } else { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg); return -EINVAL; } - ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); track->cb_color_frag_bo[tmp] = reloc->robj; + track->cb_color_frag_offset[tmp] = (u64)ib[idx] << 8; + ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + } + if (G_0280A0_TILE_MODE(track->cb_color_info[tmp])) { + track->cb_dirty = true; } break; case R_0280C0_CB_COLOR0_TILE: @@ -1338,16 +1389,35 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) dev_err(p->dev, "Broken old userspace ? no cb_color0_base supplied before trying to write 0x%08X\n", reg); return -EINVAL; } - ib[idx] = track->cb_color_base_last[tmp]; track->cb_color_tile_bo[tmp] = track->cb_color_bo[tmp]; + track->cb_color_tile_offset[tmp] = track->cb_color_bo_offset[tmp]; + ib[idx] = track->cb_color_base_last[tmp]; } else { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg); return -EINVAL; } - ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); track->cb_color_tile_bo[tmp] = reloc->robj; + track->cb_color_tile_offset[tmp] = (u64)ib[idx] << 8; + ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + } + if (G_0280A0_TILE_MODE(track->cb_color_info[tmp])) { + track->cb_dirty = true; + } + break; + case R_028100_CB_COLOR0_MASK: + case R_028104_CB_COLOR1_MASK: + case R_028108_CB_COLOR2_MASK: + case R_02810C_CB_COLOR3_MASK: + case R_028110_CB_COLOR4_MASK: + case R_028114_CB_COLOR5_MASK: + case R_028118_CB_COLOR6_MASK: + case R_02811C_CB_COLOR7_MASK: + tmp = (reg - R_028100_CB_COLOR0_MASK) / 4; + track->cb_color_mask[tmp] = ib[idx]; + if (G_0280A0_TILE_MODE(track->cb_color_info[tmp])) { + track->cb_dirty = true; } break; case CB_COLOR0_BASE: diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index fd328f4c3ea..bdb69a63062 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -92,6 +92,20 @@ #define R_028094_CB_COLOR5_VIEW 0x028094 #define R_028098_CB_COLOR6_VIEW 0x028098 #define R_02809C_CB_COLOR7_VIEW 0x02809C +#define R_028100_CB_COLOR0_MASK 0x028100 +#define S_028100_CMASK_BLOCK_MAX(x) (((x) & 0xFFF) << 0) +#define G_028100_CMASK_BLOCK_MAX(x) (((x) >> 0) & 0xFFF) +#define C_028100_CMASK_BLOCK_MAX 0xFFFFF000 +#define S_028100_FMASK_TILE_MAX(x) (((x) & 0xFFFFF) << 12) +#define G_028100_FMASK_TILE_MAX(x) (((x) >> 12) & 0xFFFFF) +#define C_028100_FMASK_TILE_MAX 0x00000FFF +#define R_028104_CB_COLOR1_MASK 0x028104 +#define R_028108_CB_COLOR2_MASK 0x028108 +#define R_02810C_CB_COLOR3_MASK 0x02810C +#define R_028110_CB_COLOR4_MASK 0x028110 +#define R_028114_CB_COLOR5_MASK 0x028114 +#define R_028118_CB_COLOR6_MASK 0x028118 +#define R_02811C_CB_COLOR7_MASK 0x02811C #define CB_COLOR0_INFO 0x280a0 # define CB_FORMAT(x) ((x) << 2) # define CB_ARRAY_MODE(x) ((x) << 8) @@ -1400,6 +1414,9 @@ #define S_0280A0_TILE_MODE(x) (((x) & 0x3) << 18) #define G_0280A0_TILE_MODE(x) (((x) >> 18) & 0x3) #define C_0280A0_TILE_MODE 0xFFF3FFFF +#define V_0280A0_TILE_DISABLE 0 +#define V_0280A0_CLEAR_ENABLE 1 +#define V_0280A0_FRAG_ENABLE 2 #define S_0280A0_BLEND_CLAMP(x) (((x) & 0x1) << 20) #define G_0280A0_BLEND_CLAMP(x) (((x) >> 20) & 0x1) #define C_0280A0_BLEND_CLAMP 0xFFEFFFFF diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index d7269f48d37..27d22d709c9 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -62,9 +62,10 @@ * 2.18.0 - r600-eg: allow "invalid" DB formats * 2.19.0 - r600-eg: MSAA textures * 2.20.0 - r600-si: RADEON_INFO_TIMESTAMP query + * 2.21.0 - r600-r700: FMASK and CMASK */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 20 +#define KMS_DRIVER_MINOR 21 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600 index 5e659b034d9..f93e45d869f 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/r600 +++ b/drivers/gpu/drm/radeon/reg_srcs/r600 @@ -744,14 +744,6 @@ r600 0x9400 0x00028C38 CB_CLRCMP_DST 0x00028C3C CB_CLRCMP_MSK 0x00028C34 CB_CLRCMP_SRC -0x00028100 CB_COLOR0_MASK -0x00028104 CB_COLOR1_MASK -0x00028108 CB_COLOR2_MASK -0x0002810C CB_COLOR3_MASK -0x00028110 CB_COLOR4_MASK -0x00028114 CB_COLOR5_MASK -0x00028118 CB_COLOR6_MASK -0x0002811C CB_COLOR7_MASK 0x00028808 CB_COLOR_CONTROL 0x0002842C CB_FOG_BLUE 0x00028428 CB_FOG_GREEN -- cgit v1.2.3-70-g09d2 From fcdeefe4df5c0fa457f2dc181ef4e3b2b26de781 Mon Sep 17 00:00:00 2001 From: Marek Olšák Date: Sun, 19 Aug 2012 21:23:26 +0200 Subject: drm/radeon: fix checking of MSAA renderbuffers on r600-r700 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MSAA checking was mostly unimplemented on r600-r700. The userspace submits GPU commands and the kernel driver computes how much memory the GPU will access and checks if it's all within buffer bounds the userspace allocated. This patch fixes the computations of the size of MSAA surfaces in memory. Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_cs.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 1bec5b8bba1..ab74e6b149e 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -420,7 +420,8 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) } /* check offset */ - tmp = r600_fmt_get_nblocksy(format, height) * r600_fmt_get_nblocksx(format, pitch) * r600_fmt_get_blocksize(format); + tmp = r600_fmt_get_nblocksy(format, height) * r600_fmt_get_nblocksx(format, pitch) * + r600_fmt_get_blocksize(format) * track->nsamples; switch (array_mode) { default: case V_0280A0_ARRAY_LINEAR_GENERAL: @@ -611,7 +612,7 @@ static int r600_cs_track_validate_db(struct radeon_cs_parser *p) ntiles = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1; nviews = G_028004_SLICE_MAX(track->db_depth_view) + 1; - tmp = ntiles * bpe * 64 * nviews; + tmp = ntiles * bpe * 64 * nviews * track->nsamples; if ((tmp + track->db_offset) > radeon_bo_size(track->db_bo)) { dev_warn(p->dev, "z/stencil buffer (%d) too small (0x%08X %d %d %d -> %u have %lu)\n", array_mode, @@ -1562,7 +1563,7 @@ unsigned r600_mip_minify(unsigned size, unsigned level) } static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned llevel, - unsigned w0, unsigned h0, unsigned d0, unsigned format, + unsigned w0, unsigned h0, unsigned d0, unsigned nsamples, unsigned format, unsigned block_align, unsigned height_align, unsigned base_align, unsigned *l0_size, unsigned *mipmap_size) { @@ -1590,7 +1591,7 @@ static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned llevel, depth = r600_mip_minify(d0, i); - size = nbx * nby * blocksize; + size = nbx * nby * blocksize * nsamples; if (nfaces) size *= nfaces; else @@ -1742,7 +1743,7 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, nfaces = larray - barray + 1; } - r600_texture_size(nfaces, blevel, llevel, w0, h0, d0, format, + r600_texture_size(nfaces, blevel, llevel, w0, h0, d0, array_check.nsamples, format, pitch_align, height_align, base_align, &l0_size, &mipmap_size); /* using get ib will give us the offset into the texture bo */ -- cgit v1.2.3-70-g09d2 From 52e9b39d9a89ae33662596bd30e62dd56bddbe73 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Mon, 20 Aug 2012 15:16:04 +0100 Subject: drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping There is a more recent APU stepping with a new PCI ID shipping in the same board by Fujitsu which needs the same quirk to correctly mark the back plane connectors. Signed-off-by: Tvrtko Ursulin Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_atombios.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index f9c21f9d16b..d67d4f3eb6f 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -452,7 +452,7 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev, } /* Fujitsu D3003-S2 board lists DVI-I as DVI-D and VGA */ - if ((dev->pdev->device == 0x9802) && + if (((dev->pdev->device == 0x9802) || (dev->pdev->device == 0x9806)) && (dev->pdev->subsystem_vendor == 0x1734) && (dev->pdev->subsystem_device == 0x11bd)) { if (*connector_type == DRM_MODE_CONNECTOR_VGA) { -- cgit v1.2.3-70-g09d2 From 268ba0a99f89a84dc5eb312470896113d0709c74 Mon Sep 17 00:00:00 2001 From: David Lamparter Date: Thu, 16 Aug 2012 15:45:20 -0400 Subject: drm/radeon: implement ACPI VFCT vbios fetch (v3) This is required for pure UEFI systems. The vbios is stored in ACPI rather than at the legacy vga location. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=26891 V2: fix #ifdefs as per Greg's comments V3: fix it harder Signed-off-by: Alex Deucher Reviewed-by: Jerome Glisse Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_bios.c | 60 ++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 501f4881e5a..a32232fc7bd 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -32,6 +32,7 @@ #include #include +#include /* * BIOS. */ @@ -476,6 +477,63 @@ static bool radeon_read_disabled_bios(struct radeon_device *rdev) return legacy_read_disabled_bios(rdev); } +#ifdef CONFIG_ACPI +static bool radeon_acpi_vfct_bios(struct radeon_device *rdev) +{ + bool ret = false; + struct acpi_table_header *hdr; + /* acpi_get_table_with_size is not exported :( */ + acpi_size tbl_size = 0x7fffffff; + UEFI_ACPI_VFCT *vfct; + GOP_VBIOS_CONTENT *vbios; + VFCT_IMAGE_HEADER *vhdr; + + if (!ACPI_SUCCESS(acpi_get_table("VFCT", 1, &hdr))) + return false; + if (tbl_size < sizeof(UEFI_ACPI_VFCT)) { + DRM_ERROR("ACPI VFCT table present but broken (too short #1)\n"); + goto out_unmap; + } + + vfct = (UEFI_ACPI_VFCT *)hdr; + if (vfct->VBIOSImageOffset + sizeof(VFCT_IMAGE_HEADER) > tbl_size) { + DRM_ERROR("ACPI VFCT table present but broken (too short #2)\n"); + goto out_unmap; + } + + vbios = (GOP_VBIOS_CONTENT *)((char *)hdr + vfct->VBIOSImageOffset); + vhdr = &vbios->VbiosHeader; + DRM_INFO("ACPI VFCT contains a BIOS for %02x:%02x.%d %04x:%04x, size %d\n", + vhdr->PCIBus, vhdr->PCIDevice, vhdr->PCIFunction, + vhdr->VendorID, vhdr->DeviceID, vhdr->ImageLength); + + if (vhdr->PCIBus != rdev->pdev->bus->number || + vhdr->PCIDevice != PCI_SLOT(rdev->pdev->devfn) || + vhdr->PCIFunction != PCI_FUNC(rdev->pdev->devfn) || + vhdr->VendorID != rdev->pdev->vendor || + vhdr->DeviceID != rdev->pdev->device) { + DRM_INFO("ACPI VFCT table is not for this card\n"); + goto out_unmap; + }; + + if (vfct->VBIOSImageOffset + sizeof(VFCT_IMAGE_HEADER) + vhdr->ImageLength > tbl_size) { + DRM_ERROR("ACPI VFCT image truncated\n"); + goto out_unmap; + } + + rdev->bios = kmemdup(&vbios->VbiosContent, vhdr->ImageLength, GFP_KERNEL); + ret = !!rdev->bios; + +out_unmap: + /* uh, no idea what to do here... */ + return ret; +} +#else +static inline bool radeon_acpi_vfct_bios(struct radeon_device *rdev) +{ + return false; +} +#endif bool radeon_get_bios(struct radeon_device *rdev) { @@ -483,6 +541,8 @@ bool radeon_get_bios(struct radeon_device *rdev) uint16_t tmp; r = radeon_atrm_get_bios(rdev); + if (r == false) + r = radeon_acpi_vfct_bios(rdev); if (r == false) r = igp_read_bios_from_vram(rdev); if (r == false) -- cgit v1.2.3-70-g09d2 From 4f81f986761a7663db7d24d24cd6ae68008f1fc2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 20 Aug 2012 10:57:22 -0400 Subject: ACPI: export symbol acpi_get_table_with_size We need it in the radeon drm module to fetch and verify the vbios image on UEFI systems. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/acpi/acpica/tbxface.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c index ea4c6d52605..29e51bc0138 100644 --- a/drivers/acpi/acpica/tbxface.c +++ b/drivers/acpi/acpica/tbxface.c @@ -387,6 +387,7 @@ acpi_get_table_with_size(char *signature, return (AE_NOT_FOUND); } +ACPI_EXPORT_SYMBOL(acpi_get_table_with_size) acpi_status acpi_get_table(char *signature, -- cgit v1.2.3-70-g09d2 From 7c3906d04a4587dceaa78cc1ae6b14e6454ee02a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 20 Aug 2012 11:06:21 -0400 Subject: drm/radeon: convert radeon vfct code to use acpi_get_table_with_size Allows us to verify the table size. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_bios.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index a32232fc7bd..ab0b2f7292a 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -482,13 +482,12 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev) { bool ret = false; struct acpi_table_header *hdr; - /* acpi_get_table_with_size is not exported :( */ - acpi_size tbl_size = 0x7fffffff; + acpi_size tbl_size; UEFI_ACPI_VFCT *vfct; GOP_VBIOS_CONTENT *vbios; VFCT_IMAGE_HEADER *vhdr; - if (!ACPI_SUCCESS(acpi_get_table("VFCT", 1, &hdr))) + if (!ACPI_SUCCESS(acpi_get_table_with_size("VFCT", 1, &hdr, &tbl_size))) return false; if (tbl_size < sizeof(UEFI_ACPI_VFCT)) { DRM_ERROR("ACPI VFCT table present but broken (too short #1)\n"); @@ -525,7 +524,6 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev) ret = !!rdev->bios; out_unmap: - /* uh, no idea what to do here... */ return ret; } #else -- cgit v1.2.3-70-g09d2 From c61e2775873f603148e8e998a938721b7d222d24 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 16 Aug 2012 15:39:09 -0400 Subject: drm/radeon: split ATRM support out from the ATPX handler (v3) There are systems that use ATRM, but not ATPX. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41265 V2: fix #ifdefs as per Greg's comments V3: fix it harder Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon.h | 15 ------ drivers/gpu/drm/radeon/radeon_atpx_handler.c | 56 +------------------ drivers/gpu/drm/radeon/radeon_bios.c | 80 ++++++++++++++++++++++++++-- 3 files changed, 77 insertions(+), 74 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 99304194a65..59a15315ae9 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -142,21 +142,6 @@ struct radeon_device; /* * BIOS. */ -#define ATRM_BIOS_PAGE 4096 - -#if defined(CONFIG_VGA_SWITCHEROO) -bool radeon_atrm_supported(struct pci_dev *pdev); -int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len); -#else -static inline bool radeon_atrm_supported(struct pci_dev *pdev) -{ - return false; -} - -static inline int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len){ - return -EINVAL; -} -#endif bool radeon_get_bios(struct radeon_device *rdev); /* diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 98724fcb008..2a2cf0b88a2 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -30,57 +30,8 @@ static struct radeon_atpx_priv { /* handle for device - and atpx */ acpi_handle dhandle; acpi_handle atpx_handle; - acpi_handle atrm_handle; } radeon_atpx_priv; -/* retrieve the ROM in 4k blocks */ -static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios, - int offset, int len) -{ - acpi_status status; - union acpi_object atrm_arg_elements[2], *obj; - struct acpi_object_list atrm_arg; - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL}; - - atrm_arg.count = 2; - atrm_arg.pointer = &atrm_arg_elements[0]; - - atrm_arg_elements[0].type = ACPI_TYPE_INTEGER; - atrm_arg_elements[0].integer.value = offset; - - atrm_arg_elements[1].type = ACPI_TYPE_INTEGER; - atrm_arg_elements[1].integer.value = len; - - status = acpi_evaluate_object(atrm_handle, NULL, &atrm_arg, &buffer); - if (ACPI_FAILURE(status)) { - printk("failed to evaluate ATRM got %s\n", acpi_format_exception(status)); - return -ENODEV; - } - - obj = (union acpi_object *)buffer.pointer; - memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length); - len = obj->buffer.length; - kfree(buffer.pointer); - return len; -} - -bool radeon_atrm_supported(struct pci_dev *pdev) -{ - /* get the discrete ROM only via ATRM */ - if (!radeon_atpx_priv.atpx_detected) - return false; - - if (radeon_atpx_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev)) - return false; - return true; -} - - -int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len) -{ - return radeon_atrm_call(radeon_atpx_priv.atrm_handle, bios, offset, len); -} - static int radeon_atpx_get_version(acpi_handle handle) { acpi_status status; @@ -198,7 +149,7 @@ static int radeon_atpx_power_state(enum vga_switcheroo_client_id id, static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) { - acpi_handle dhandle, atpx_handle, atrm_handle; + acpi_handle dhandle, atpx_handle; acpi_status status; dhandle = DEVICE_ACPI_HANDLE(&pdev->dev); @@ -209,13 +160,8 @@ static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) if (ACPI_FAILURE(status)) return false; - status = acpi_get_handle(dhandle, "ATRM", &atrm_handle); - if (ACPI_FAILURE(status)) - return false; - radeon_atpx_priv.dhandle = dhandle; radeon_atpx_priv.atpx_handle = atpx_handle; - radeon_atpx_priv.atrm_handle = atrm_handle; return true; } diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index ab0b2f7292a..d306cc8fdea 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -99,16 +99,81 @@ static bool radeon_read_bios(struct radeon_device *rdev) return true; } +#ifdef CONFIG_ACPI /* ATRM is used to get the BIOS on the discrete cards in * dual-gpu systems. */ +/* retrieve the ROM in 4k blocks */ +#define ATRM_BIOS_PAGE 4096 +/** + * radeon_atrm_call - fetch a chunk of the vbios + * + * @atrm_handle: acpi ATRM handle + * @bios: vbios image pointer + * @offset: offset of vbios image data to fetch + * @len: length of vbios image data to fetch + * + * Executes ATRM to fetch a chunk of the discrete + * vbios image on PX systems (all asics). + * Returns the length of the buffer fetched. + */ +static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios, + int offset, int len) +{ + acpi_status status; + union acpi_object atrm_arg_elements[2], *obj; + struct acpi_object_list atrm_arg; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL}; + + atrm_arg.count = 2; + atrm_arg.pointer = &atrm_arg_elements[0]; + + atrm_arg_elements[0].type = ACPI_TYPE_INTEGER; + atrm_arg_elements[0].integer.value = offset; + + atrm_arg_elements[1].type = ACPI_TYPE_INTEGER; + atrm_arg_elements[1].integer.value = len; + + status = acpi_evaluate_object(atrm_handle, NULL, &atrm_arg, &buffer); + if (ACPI_FAILURE(status)) { + printk("failed to evaluate ATRM got %s\n", acpi_format_exception(status)); + return -ENODEV; + } + + obj = (union acpi_object *)buffer.pointer; + memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length); + len = obj->buffer.length; + kfree(buffer.pointer); + return len; +} + static bool radeon_atrm_get_bios(struct radeon_device *rdev) { int ret; int size = 256 * 1024; int i; + struct pci_dev *pdev = NULL; + acpi_handle dhandle, atrm_handle; + acpi_status status; + bool found = false; - if (!radeon_atrm_supported(rdev->pdev)) + /* ATRM is for the discrete card only */ + if (rdev->flags & RADEON_IS_IGP) + return false; + + while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev)) != NULL) { + dhandle = DEVICE_ACPI_HANDLE(&pdev->dev); + if (!dhandle) + continue; + + status = acpi_get_handle(dhandle, "ATRM", &atrm_handle); + if (!ACPI_FAILURE(status)) { + found = true; + break; + } + } + + if (!found) return false; rdev->bios = kmalloc(size, GFP_KERNEL); @@ -118,9 +183,10 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev) } for (i = 0; i < size / ATRM_BIOS_PAGE; i++) { - ret = radeon_atrm_get_bios_chunk(rdev->bios, - (i * ATRM_BIOS_PAGE), - ATRM_BIOS_PAGE); + ret = radeon_atrm_call(atrm_handle, + rdev->bios, + (i * ATRM_BIOS_PAGE), + ATRM_BIOS_PAGE); if (ret < ATRM_BIOS_PAGE) break; } @@ -131,6 +197,12 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev) } return true; } +#else +static inline bool radeon_atrm_get_bios(struct radeon_device *rdev) +{ + return false; +} +#endif static bool ni_read_disabled_bios(struct radeon_device *rdev) { -- cgit v1.2.3-70-g09d2 From 7653f6ff4ebab2a094e65b60fb19ee66ed2f78e7 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 20 Aug 2012 12:12:29 -0400 Subject: NFSv4: Ensure that nfs4_alloc_client cleans up on error. Any pointer that was allocated through nfs_alloc_client() needs to be freed via a call to nfs_free_client(). Reported-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust --- fs/nfs/nfs4client.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index cbcdfaf3250..24eb663f8ed 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -74,7 +74,7 @@ struct nfs_client *nfs4_alloc_client(const struct nfs_client_initdata *cl_init) return clp; error: - kfree(clp); + nfs_free_client(clp); return ERR_PTR(err); } -- cgit v1.2.3-70-g09d2 From 296f9fe05d916e3d791dcd166aa41c1dadca4735 Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Fri, 6 Jul 2012 16:07:50 +0800 Subject: ideapad: add Lenovo IdeaPad Z570 support (part 1) The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special keys working, adds possibility to control fan like Windows does, controls Touchpad Disabled LED, toggles touchpad state via keyboard controller and corrects touchpad behavior on resume from suspend. It is new, modified version of patch. Now it does not depend on psmouse and does not need patching of input subsystem. Signed-off-by: Maxim Mikityanskiy This is part 1 for special button handling. Signed-off-by: Ike Panhc Signed-off-by: Matthew Garrett --- drivers/platform/x86/ideapad-laptop.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 17f6dfd8dbf..2396242e841 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -65,6 +65,7 @@ enum { VPCCMD_R_ODD, /* 0x21 */ VPCCMD_R_RF = 0x23, VPCCMD_W_RF, + VPCCMD_R_SPECIAL_BUTTONS = 0x31, VPCCMD_W_BL_POWER = 0x33, }; @@ -518,9 +519,13 @@ static void ideapad_platform_exit(struct ideapad_private *priv) */ static const struct key_entry ideapad_keymap[] = { { KE_KEY, 6, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 7, { KEY_CAMERA } }, + { KE_KEY, 11, { KEY_F16 } }, { KE_KEY, 13, { KEY_WLAN } }, { KE_KEY, 16, { KEY_PROG1 } }, { KE_KEY, 17, { KEY_PROG2 } }, + { KE_KEY, 64, { KEY_PROG3 } }, + { KE_KEY, 65, { KEY_PROG4 } }, { KE_END, 0 }, }; @@ -587,6 +592,28 @@ static void ideapad_input_novokey(struct ideapad_private *priv) ideapad_input_report(priv, 16); } +static void ideapad_check_special_buttons(struct ideapad_private *priv) +{ + unsigned long bit, value; + + read_ec_data(ideapad_handle, VPCCMD_R_SPECIAL_BUTTONS, &value); + + for (bit = 0; bit < 16; bit++) { + if (test_bit(bit, &value)) { + switch (bit) { + case 6: + /* Thermal Management button */ + ideapad_input_report(priv, 65); + break; + case 1: + /* OneKey Theater button */ + ideapad_input_report(priv, 64); + break; + } + } + } +} + /* * backlight */ @@ -785,6 +812,8 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) ideapad_sync_rfk_state(priv); break; case 13: + case 11: + case 7: case 6: ideapad_input_report(priv, vpc_bit); break; @@ -797,6 +826,9 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) case 2: ideapad_backlight_notify_power(priv); break; + case 0: + ideapad_check_special_buttons(priv); + break; default: pr_info("Unknown event: %lu\n", vpc_bit); } -- cgit v1.2.3-70-g09d2 From 07a4a4fc83dd95bc7eb842cf9510ddcb45691a88 Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Fri, 6 Jul 2012 16:08:00 +0800 Subject: ideapad: add Lenovo IdeaPad Z570 support (part 2) The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special keys working, adds possibility to control fan like Windows does, controls Touchpad Disabled LED, toggles touchpad state via keyboard controller and corrects touchpad behavior on resume from suspend. It is new, modified version of patch. Now it does not depend on psmouse and does not need patching of input subsystem. Signed-off-by: Maxim Mikityanskiy This is part 2 for touchpad toggle Signed-off-by: Ike Panhc Signed-off-by: Matthew Garrett --- drivers/platform/x86/Kconfig | 1 + drivers/platform/x86/ideapad-laptop.c | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 637074d8979..c86bae828c2 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -289,6 +289,7 @@ config IDEAPAD_LAPTOP tristate "Lenovo IdeaPad Laptop Extras" depends on ACPI depends on RFKILL && INPUT + depends on SERIO_I8042 select INPUT_SPARSEKMAP help This is a driver for the rfkill switches on Lenovo IdeaPad netbooks. diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 2396242e841..7bc1b6c60e5 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -36,6 +36,7 @@ #include #include #include +#include #define IDEAPAD_RFKILL_DEV_NUM (3) @@ -526,6 +527,8 @@ static const struct key_entry ideapad_keymap[] = { { KE_KEY, 17, { KEY_PROG2 } }, { KE_KEY, 64, { KEY_PROG3 } }, { KE_KEY, 65, { KEY_PROG4 } }, + { KE_KEY, 66, { KEY_TOUCHPAD_OFF } }, + { KE_KEY, 67, { KEY_TOUCHPAD_ON } }, { KE_END, 0 }, }; @@ -718,6 +721,24 @@ static const struct acpi_device_id ideapad_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, ideapad_device_ids); +static void ideapad_sync_touchpad_state(struct acpi_device *adevice) +{ + struct ideapad_private *priv = dev_get_drvdata(&adevice->dev); + unsigned long value; + + /* Without reading from EC touchpad LED doesn't switch state */ + if (!read_ec_data(adevice->handle, VPCCMD_R_TOUCHPAD, &value)) { + /* Some IdeaPads don't really turn off touchpad - they only + * switch the LED state. We (de)activate KBC AUX port to turn + * touchpad off and on. We send KEY_TOUCHPAD_OFF and + * KEY_TOUCHPAD_ON to not to get out of sync with LED */ + unsigned char param; + i8042_command(¶m, value ? I8042_CMD_AUX_ENABLE : + I8042_CMD_AUX_DISABLE); + ideapad_input_report(priv, value ? 67 : 66); + } +} + static int __devinit ideapad_acpi_add(struct acpi_device *adevice) { int ret, i; @@ -754,6 +775,7 @@ static int __devinit ideapad_acpi_add(struct acpi_device *adevice) priv->rfk[i] = NULL; } ideapad_sync_rfk_state(priv); + ideapad_sync_touchpad_state(adevice); if (!acpi_video_backlight_support()) { ret = ideapad_backlight_init(priv); @@ -817,6 +839,9 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) case 6: ideapad_input_report(priv, vpc_bit); break; + case 5: + ideapad_sync_touchpad_state(adevice); + break; case 4: ideapad_backlight_notify_brightness(priv); break; @@ -836,6 +861,15 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) } } +static int ideapad_acpi_resume(struct device *device) +{ + ideapad_sync_rfk_state(ideapad_priv); + ideapad_sync_touchpad_state(to_acpi_device(device)); + return 0; +} + +static SIMPLE_DEV_PM_OPS(ideapad_pm, NULL, ideapad_acpi_resume); + static struct acpi_driver ideapad_acpi_driver = { .name = "ideapad_acpi", .class = "IdeaPad", @@ -843,6 +877,7 @@ static struct acpi_driver ideapad_acpi_driver = { .ops.add = ideapad_acpi_add, .ops.remove = ideapad_acpi_remove, .ops.notify = ideapad_acpi_notify, + .drv.pm = &ideapad_pm, .owner = THIS_MODULE, }; -- cgit v1.2.3-70-g09d2 From 0c7bbeb9f1373cea9e8efb43221118be2102a01c Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Fri, 6 Jul 2012 16:08:11 +0800 Subject: ideapad: add Lenovo IdeaPad Z570 support (part 3) The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special keys working, adds possibility to control fan like Windows does, controls Touchpad Disabled LED, toggles touchpad state via keyboard controller and corrects touchpad behavior on resume from suspend. It is new, modified version of patch. Now it does not depend on psmouse and does not need patching of input subsystem. Signed-off-by: Maxim Mikityanskiy This is the part 3 for fan control Signed-off-by: Ike Panhc Signed-off-by: Matthew Garrett --- .../ABI/testing/sysfs-platform-ideapad-laptop | 11 ++++++ drivers/platform/x86/ideapad-laptop.c | 43 ++++++++++++++++++++-- 2 files changed, 51 insertions(+), 3 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop index 814b01354c4..b31e782bd98 100644 --- a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop +++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop @@ -5,4 +5,15 @@ Contact: "Ike Panhc " Description: Control the power of camera module. 1 means on, 0 means off. +What: /sys/devices/platform/ideapad/fan_mode +Date: June 2012 +KernelVersion: 3.6 +Contact: "Maxim Mikityanskiy " +Description: + Change fan mode + There are four available modes: + * 0 -> Super Silent Mode + * 1 -> Standard Mode + * 2 -> Dust Cleaning + * 4 -> Efficient Thermal Dissipation Mode diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 7bc1b6c60e5..dae7abe1d71 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -64,8 +64,10 @@ enum { VPCCMD_R_3G, VPCCMD_W_3G, VPCCMD_R_ODD, /* 0x21 */ - VPCCMD_R_RF = 0x23, + VPCCMD_W_FAN, + VPCCMD_R_RF, VPCCMD_W_RF, + VPCCMD_R_FAN = 0x2B, VPCCMD_R_SPECIAL_BUTTONS = 0x31, VPCCMD_W_BL_POWER = 0x33, }; @@ -358,14 +360,46 @@ static ssize_t store_ideapad_cam(struct device *dev, return -EINVAL; ret = write_ec_cmd(ideapad_handle, VPCCMD_W_CAMERA, state); if (ret < 0) - return ret; + return -EIO; return count; } static DEVICE_ATTR(camera_power, 0644, show_ideapad_cam, store_ideapad_cam); +static ssize_t show_ideapad_fan(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + unsigned long result; + + if (read_ec_data(ideapad_handle, VPCCMD_R_FAN, &result)) + return sprintf(buf, "-1\n"); + return sprintf(buf, "%lu\n", result); +} + +static ssize_t store_ideapad_fan(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret, state; + + if (!count) + return 0; + if (sscanf(buf, "%i", &state) != 1) + return -EINVAL; + if (state < 0 || state > 4 || state == 3) + return -EINVAL; + ret = write_ec_cmd(ideapad_handle, VPCCMD_W_FAN, state); + if (ret < 0) + return -EIO; + return count; +} + +static DEVICE_ATTR(fan_mode, 0644, show_ideapad_fan, store_ideapad_fan); + static struct attribute *ideapad_attributes[] = { &dev_attr_camera_power.attr, + &dev_attr_fan_mode.attr, NULL }; @@ -379,7 +413,10 @@ static umode_t ideapad_is_visible(struct kobject *kobj, if (attr == &dev_attr_camera_power.attr) supported = test_bit(CFG_CAMERA_BIT, &(priv->cfg)); - else + else if (attr == &dev_attr_fan_mode.attr) { + unsigned long value; + supported = !read_ec_data(ideapad_handle, VPCCMD_R_FAN, &value); + } else supported = true; return supported ? attr->mode : 0; -- cgit v1.2.3-70-g09d2 From 086600430493e04b802bee6e5b3ce0458e4eb77f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 20 Aug 2012 12:42:15 -0400 Subject: NFSv3: Ensure that do_proc_get_root() reports errors correctly If the rpc call to NFS3PROC_FSINFO fails, then we need to report that error so that the mount fails. Otherwise we can end up with a superblock with completely unusable values for block sizes, maxfilesize, etc. Reported-by: Yuanming Chen Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/nfs3proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index 0952c791df3..d6b3b5f2d77 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -69,7 +69,7 @@ do_proc_get_root(struct rpc_clnt *client, struct nfs_fh *fhandle, nfs_fattr_init(info->fattr); status = rpc_call_sync(client, &msg, 0); dprintk("%s: reply fsinfo: %d\n", __func__, status); - if (!(info->fattr->valid & NFS_ATTR_FATTR)) { + if (status == 0 && !(info->fattr->valid & NFS_ATTR_FATTR)) { msg.rpc_proc = &nfs3_procedures[NFS3PROC_GETATTR]; msg.rpc_resp = info->fattr; status = rpc_call_sync(client, &msg, 0); -- cgit v1.2.3-70-g09d2 From d1c338a509cea5378df59629ad47382810c38623 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Sun, 19 Aug 2012 12:29:16 -0700 Subject: libceph: delay debugfs initialization until we learn global_id The debugfs directory includes the cluster fsid and our unique global_id. We need to delay the initialization of the debug entry until we have learned both the fsid and our global_id from the monitor or else the second client can't create its debugfs entry and will fail (and multiple client instances aren't properly reflected in debugfs). Reported by: Yan, Zheng Signed-off-by: Sage Weil Reviewed-by: Yehuda Sadeh --- fs/ceph/debugfs.c | 1 + net/ceph/ceph_common.c | 1 - net/ceph/debugfs.c | 4 ++++ net/ceph/mon_client.c | 51 +++++++++++++++++++++++++++++++++++++++++++++----- 4 files changed, 51 insertions(+), 6 deletions(-) diff --git a/fs/ceph/debugfs.c b/fs/ceph/debugfs.c index fb962efdace..6d59006bfa2 100644 --- a/fs/ceph/debugfs.c +++ b/fs/ceph/debugfs.c @@ -201,6 +201,7 @@ int ceph_fs_debugfs_init(struct ceph_fs_client *fsc) int err = -ENOMEM; dout("ceph_fs_debugfs_init\n"); + BUG_ON(!fsc->client->debugfs_dir); fsc->debugfs_congestion_kb = debugfs_create_file("writeback_congestion_kb", 0600, diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c index 69e38db28e5..a8020293f34 100644 --- a/net/ceph/ceph_common.c +++ b/net/ceph/ceph_common.c @@ -84,7 +84,6 @@ int ceph_check_fsid(struct ceph_client *client, struct ceph_fsid *fsid) return -1; } } else { - pr_info("client%lld fsid %pU\n", ceph_client_id(client), fsid); memcpy(&client->fsid, fsid, sizeof(*fsid)); } return 0; diff --git a/net/ceph/debugfs.c b/net/ceph/debugfs.c index 54b531a0112..38b5dc1823d 100644 --- a/net/ceph/debugfs.c +++ b/net/ceph/debugfs.c @@ -189,6 +189,9 @@ int ceph_debugfs_client_init(struct ceph_client *client) snprintf(name, sizeof(name), "%pU.client%lld", &client->fsid, client->monc.auth->global_id); + dout("ceph_debugfs_client_init %p %s\n", client, name); + + BUG_ON(client->debugfs_dir); client->debugfs_dir = debugfs_create_dir(name, ceph_debugfs_dir); if (!client->debugfs_dir) goto out; @@ -234,6 +237,7 @@ out: void ceph_debugfs_client_cleanup(struct ceph_client *client) { + dout("ceph_debugfs_client_cleanup %p\n", client); debugfs_remove(client->debugfs_osdmap); debugfs_remove(client->debugfs_monmap); debugfs_remove(client->osdc.debugfs_file); diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c index 105d533b55f..900ea0f043f 100644 --- a/net/ceph/mon_client.c +++ b/net/ceph/mon_client.c @@ -310,6 +310,17 @@ int ceph_monc_open_session(struct ceph_mon_client *monc) } EXPORT_SYMBOL(ceph_monc_open_session); +/* + * We require the fsid and global_id in order to initialize our + * debugfs dir. + */ +static bool have_debugfs_info(struct ceph_mon_client *monc) +{ + dout("have_debugfs_info fsid %d globalid %lld\n", + (int)monc->client->have_fsid, monc->auth->global_id); + return monc->client->have_fsid && monc->auth->global_id > 0; +} + /* * The monitor responds with mount ack indicate mount success. The * included client ticket allows the client to talk to MDSs and OSDs. @@ -320,9 +331,12 @@ static void ceph_monc_handle_map(struct ceph_mon_client *monc, struct ceph_client *client = monc->client; struct ceph_monmap *monmap = NULL, *old = monc->monmap; void *p, *end; + int had_debugfs_info, init_debugfs = 0; mutex_lock(&monc->mutex); + had_debugfs_info = have_debugfs_info(monc); + dout("handle_monmap\n"); p = msg->front.iov_base; end = p + msg->front.iov_len; @@ -344,12 +358,22 @@ static void ceph_monc_handle_map(struct ceph_mon_client *monc, if (!client->have_fsid) { client->have_fsid = true; + if (!had_debugfs_info && have_debugfs_info(monc)) { + pr_info("client%lld fsid %pU\n", + ceph_client_id(monc->client), + &monc->client->fsid); + init_debugfs = 1; + } mutex_unlock(&monc->mutex); - /* - * do debugfs initialization without mutex to avoid - * creating a locking dependency - */ - ceph_debugfs_client_init(client); + + if (init_debugfs) { + /* + * do debugfs initialization without mutex to avoid + * creating a locking dependency + */ + ceph_debugfs_client_init(monc->client); + } + goto out_unlocked; } out: @@ -865,8 +889,10 @@ static void handle_auth_reply(struct ceph_mon_client *monc, { int ret; int was_auth = 0; + int had_debugfs_info, init_debugfs = 0; mutex_lock(&monc->mutex); + had_debugfs_info = have_debugfs_info(monc); if (monc->auth->ops) was_auth = monc->auth->ops->is_authenticated(monc->auth); monc->pending_auth = 0; @@ -889,7 +915,22 @@ static void handle_auth_reply(struct ceph_mon_client *monc, __send_subscribe(monc); __resend_generic_request(monc); } + + if (!had_debugfs_info && have_debugfs_info(monc)) { + pr_info("client%lld fsid %pU\n", + ceph_client_id(monc->client), + &monc->client->fsid); + init_debugfs = 1; + } mutex_unlock(&monc->mutex); + + if (init_debugfs) { + /* + * do debugfs initialization without mutex to avoid + * creating a locking dependency + */ + ceph_debugfs_client_init(monc->client); + } } static int __validate_auth(struct ceph_mon_client *monc) -- cgit v1.2.3-70-g09d2 From 0e665d5d1125f9f4ccff56a75e814f10f88861a2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 20 Aug 2012 15:28:00 +0100 Subject: vfs: missed source of ->f_pos races compat_sys_{read,write}v() need the same "pass a copy of file->f_pos" thing as sys_{read,write}{,v}(). Signed-off-by: Al Viro Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/compat.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/compat.c b/fs/compat.c index 6161255fac4..1bdb350ea5d 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1155,11 +1155,14 @@ compat_sys_readv(unsigned long fd, const struct compat_iovec __user *vec, struct file *file; int fput_needed; ssize_t ret; + loff_t pos; file = fget_light(fd, &fput_needed); if (!file) return -EBADF; - ret = compat_readv(file, vec, vlen, &file->f_pos); + pos = file->f_pos; + ret = compat_readv(file, vec, vlen, &pos); + file->f_pos = pos; fput_light(file, fput_needed); return ret; } @@ -1221,11 +1224,14 @@ compat_sys_writev(unsigned long fd, const struct compat_iovec __user *vec, struct file *file; int fput_needed; ssize_t ret; + loff_t pos; file = fget_light(fd, &fput_needed); if (!file) return -EBADF; - ret = compat_writev(file, vec, vlen, &file->f_pos); + pos = file->f_pos; + ret = compat_writev(file, vec, vlen, &pos); + file->f_pos = pos; fput_light(file, fput_needed); return ret; } -- cgit v1.2.3-70-g09d2 From 1ee9ae3244c4789f3184c5123f3b2d7e405b3f4c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 15 Aug 2012 10:41:45 +0200 Subject: drm/i915: use hsw rps tuning values everywhere on gen6+ James Bottomley reported [1] a massive power regression, due to the enabling of semaphores by default in 3.5. A workaround for him is to again disable semaphores. And indeed, his system has a very hard time to enter rc6 with semaphores enabled. Ben Widawsky run around with a kill-a-watt a lot and noticed: - There are indeed a few rare systems that seem to have a hard time entering rc6 when desktop-idle. - One machine, The Indestructible Toshiba regressed in this behaviour between 3.5 and 3.6 in a merge commit! So rc6 behaviour with the current setting seems to be highly timing dependent and not robust at all. - The behaviour James reported wrt semaphores seems to be a freak timing thing that only happens on his specific machine, confirming that enabling semaphores shouldn't reduce rc6 residency. Now furthermore the Google ChromeOS guys reported [2] a while ago that at least on some machines a simply a blinking cursor can keep the gpu turbo at the highest frequency. This is because the current rps limits used on snb/ivb are highly asymmetric. On the theory that gpu turbo and rc6 tuning values are related, we've tried whether the much saner looking (since much less asymmetric) rps tuning values used for hsw would also help entering rc6 more robustly. And it seems to mostly work, and we don't really have the resources to through-roughly tune things in any better way: The values from the ChromeOS ppl seem to fare a bit worse for James' machine, so I guess we better stick with something vpg (the gpu hw/windows group) provided, hoping that they've done their jobs. Reference[1]: http://lists.freedesktop.org/archives/dri-devel/2012-July/025675.html Reference[2]: http://lists.freedesktop.org/archives/intel-gfx/2012-July/018692.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53393 Tested-by: Ben Widawsky Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 58c07cdafb7..1881c8c83f0 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2441,17 +2441,10 @@ static void gen6_enable_rps(struct drm_device *dev) dev_priv->max_delay << 24 | dev_priv->min_delay << 16); - if (IS_HASWELL(dev)) { - I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400); - I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000); - I915_WRITE(GEN6_RP_UP_EI, 66000); - I915_WRITE(GEN6_RP_DOWN_EI, 350000); - } else { - I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000); - I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000); - I915_WRITE(GEN6_RP_UP_EI, 100000); - I915_WRITE(GEN6_RP_DOWN_EI, 5000000); - } + I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400); + I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000); + I915_WRITE(GEN6_RP_UP_EI, 66000); + I915_WRITE(GEN6_RP_DOWN_EI, 350000); I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); I915_WRITE(GEN6_RP_CONTROL, -- cgit v1.2.3-70-g09d2 From 8f057d7bca549e8f7c1f8e750c75598986f5d9aa Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 20 Aug 2012 11:23:16 -0700 Subject: gpu/mfd/usb: Fix USB randconfig problems Fix config warning: warning: ( ... && DRM_USB) selects USB which has unmet direct dependencies (USB_SUPPORT && USB_ARCH_HAS_HCD) and build error: ERROR: "usb_speed_string" [drivers/usb/core/usbcore.ko] undefined! by adding the missing dependency on USB_ARCH_HAS_HCD to DRM_UDL and DRM_USB. This exposes: drivers/video/Kconfig:36:error: recursive dependency detected! drivers/video/Kconfig:36: symbol FB is selected by DRM_KMS_HELPER drivers/gpu/drm/Kconfig:28: symbol DRM_KMS_HELPER is selected by DRM_UDL drivers/gpu/drm/udl/Kconfig:1: symbol DRM_UDL depends on USB_ARCH_HAS_HCD drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI drivers/usb/Kconfig:16: symbol USB_ARCH_HAS_OHCI depends on I2C drivers/i2c/Kconfig:5: symbol I2C is selected by FB_DDC drivers/video/Kconfig:86: symbol FB_DDC is selected by FB_CYBER2000_DDC drivers/video/Kconfig:385: symbol FB_CYBER2000_DDC depends on FB_CYBER2000 drivers/video/Kconfig:373: symbol FB_CYBER2000 depends on FB which is due to drivers/usb/Kconfig: config USB_ARCH_HAS_OHCI ... default y if ARCH_PNX4008 && I2C Fix by dropping I2C from the above dependency; logic is that this is not a platform dependency but a configuration dependency: the _architecture_ still supports USB even is I2C is not selected. This exposes: drivers/video/Kconfig:36:error: recursive dependency detected! drivers/video/Kconfig:36: symbol FB is selected by DRM_KMS_HELPER drivers/gpu/drm/Kconfig:28: symbol DRM_KMS_HELPER is selected by DRM_UDL drivers/gpu/drm/udl/Kconfig:1: symbol DRM_UDL depends on USB_ARCH_HAS_HCD drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI drivers/usb/Kconfig:17: symbol USB_ARCH_HAS_OHCI depends on MFD_TC6393XB drivers/mfd/Kconfig:396: symbol MFD_TC6393XB depends on GPIOLIB drivers/gpio/Kconfig:35: symbol GPIOLIB is selected by FB_VIA drivers/video/Kconfig:1560: symbol FB_VIA depends on FB which can be fixed by having MFD_TC6393XB select GPIOLIB instead of depending on it. Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/Kconfig | 1 + drivers/gpu/drm/udl/Kconfig | 1 + drivers/mfd/Kconfig | 3 ++- drivers/usb/Kconfig | 2 +- 4 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 23120c00a88..90e28081712 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -22,6 +22,7 @@ menuconfig DRM config DRM_USB tristate depends on DRM + depends on USB_ARCH_HAS_HCD select USB config DRM_KMS_HELPER diff --git a/drivers/gpu/drm/udl/Kconfig b/drivers/gpu/drm/udl/Kconfig index 0b5e096d39a..56e0bf31d42 100644 --- a/drivers/gpu/drm/udl/Kconfig +++ b/drivers/gpu/drm/udl/Kconfig @@ -1,6 +1,7 @@ config DRM_UDL tristate "DisplayLink" depends on DRM && EXPERIMENTAL + depends on USB_ARCH_HAS_HCD select DRM_USB select FB_SYS_FILLRECT select FB_SYS_COPYAREA diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d1facef28a6..b1a146205c0 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -395,7 +395,8 @@ config MFD_TC6387XB config MFD_TC6393XB bool "Support Toshiba TC6393XB" - depends on GPIOLIB && ARM && HAVE_CLK + depends on ARM && HAVE_CLK + select GPIOLIB select MFD_CORE select MFD_TMIO help diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index a7773a3e02b..7065df6036c 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -13,7 +13,7 @@ config USB_ARCH_HAS_OHCI default y if PXA3xx default y if ARCH_EP93XX default y if ARCH_AT91 - default y if ARCH_PNX4008 && I2C + default y if ARCH_PNX4008 default y if MFD_TC6393XB default y if ARCH_W90X900 default y if ARCH_DAVINCI_DA8XX -- cgit v1.2.3-70-g09d2 From 535b6c51fe8293c88ce919cdfc4390c67a1cb6d1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 20 Aug 2012 21:25:22 +0200 Subject: ALSA: hda - Fix leftover codec->power_transition When the codec turn-on operation is canceled by the immediate power-on, the driver left the power_transition flag as is. This caused the persistent avoidance of power-save behavior. Cc: [v3.5+] Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index c3077d5dec6..f560051a949 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -4454,6 +4454,8 @@ static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down) * then there is no need to go through power up here. */ if (codec->power_on) { + if (codec->power_transition < 0) + codec->power_transition = 0; spin_unlock(&codec->power_lock); return; } -- cgit v1.2.3-70-g09d2 From 7c3ea4859ae132d61594320e148b0348f03c0edc Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 18 Aug 2012 13:23:49 -0300 Subject: [IA64] defconfig: Remove CONFIG_MISC_DEVICES commit 7c5763b845 (drivers:misc: Remove MISC_DEVICES config option) removed CONFIG_MISC_DEVICES option, so remove the occurrences from the config files as well. Signed-off-by: Fabio Estevam Signed-off-by: Tony Luck --- arch/ia64/configs/generic_defconfig | 1 - arch/ia64/configs/gensparse_defconfig | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 954d81e2e83..7913695b2fc 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -234,5 +234,4 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_T10DIF=y -CONFIG_MISC_DEVICES=y CONFIG_INTEL_IOMMU=y diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 91c41ecfa6d..f8e91336542 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -209,4 +209,3 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y CONFIG_CRYPTO_MD5=y -CONFIG_MISC_DEVICES=y -- cgit v1.2.3-70-g09d2 From 6de7145ca3db231a84b7516a6cb25878da6ebb19 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 18 Aug 2012 15:44:09 -0700 Subject: tcm_vhost: Fix vhost_scsi_target structure alignment Here TRANSPORT_IQN_LEN is 224, which is a multiple of 4. Since vhost_tpgt is 2 bytes and abi_version is 4, the total size would be 230. But gcc needs struct size be aligned to first field size, which is 4 bytes, so it pads the structure by extra 2 bytes to the total of 232. This padding is very undesirable in an ABI: - it can not be initialized easily - it can not be checked easily - it can leak information between kernel and userspace Simplest solution is probably just to make the padding explicit. (v2: Add check for zero'ed backend->reserved field for VHOST_SCSI_SET_ENDPOINT and VHOST_SCSI_CLEAR_ENDPOINT ops as requested by MST) Reported-by: Michael S. Tsirkin Signed-off-by: Michael S. Tsirkin Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 4 ++++ drivers/vhost/tcm_vhost.h | 1 + 2 files changed, 5 insertions(+) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index 74b2edaaf1f..ed8e2e6c8df 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -995,11 +995,15 @@ static long vhost_scsi_ioctl(struct file *f, unsigned int ioctl, case VHOST_SCSI_SET_ENDPOINT: if (copy_from_user(&backend, argp, sizeof backend)) return -EFAULT; + if (backend.reserved != 0) + return -EOPNOTSUPP; return vhost_scsi_set_endpoint(vs, &backend); case VHOST_SCSI_CLEAR_ENDPOINT: if (copy_from_user(&backend, argp, sizeof backend)) return -EFAULT; + if (backend.reserved != 0) + return -EOPNOTSUPP; return vhost_scsi_clear_endpoint(vs, &backend); case VHOST_SCSI_GET_ABI_VERSION: diff --git a/drivers/vhost/tcm_vhost.h b/drivers/vhost/tcm_vhost.h index e9d5c020fb3..d9e93557d66 100644 --- a/drivers/vhost/tcm_vhost.h +++ b/drivers/vhost/tcm_vhost.h @@ -93,6 +93,7 @@ struct vhost_scsi_target { int abi_version; char vhost_wwpn[TRANSPORT_IQN_LEN]; unsigned short vhost_tpgt; + unsigned short reserved; }; /* VHOST_SCSI specific defines */ -- cgit v1.2.3-70-g09d2 From 08a16208c8cb2ce1f79fea24f21dd7a8df4f12b6 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Sat, 18 Aug 2012 16:10:31 +0400 Subject: tcm_fc: rcu_deref outside rcu lock/unlock section Use rcu_dereference_protected in order to prevent lockdep complaint. Sequel of the patch 863555be Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Acked-by: Mark D. Rustad Signed-off-by: Nicholas Bellinger --- drivers/target/tcm_fc/tfc_sess.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c index 87901fa74dd..3c9e5b57caa 100644 --- a/drivers/target/tcm_fc/tfc_sess.c +++ b/drivers/target/tcm_fc/tfc_sess.c @@ -456,7 +456,9 @@ static void ft_prlo(struct fc_rport_priv *rdata) struct ft_tport *tport; mutex_lock(&ft_lport_lock); - tport = rcu_dereference(rdata->local_port->prov[FC_TYPE_FCP]); + tport = rcu_dereference_protected(rdata->local_port->prov[FC_TYPE_FCP], + lockdep_is_held(&ft_lport_lock)); + if (!tport) { mutex_unlock(&ft_lport_lock); return; -- cgit v1.2.3-70-g09d2 From 39307655a1effa8d913bba054c0e985bfaca808c Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 16 Aug 2012 17:01:21 -0400 Subject: nfsd4: fix security flavor of NFSv4.0 callback Commit d5497fc693a446ce9100fcf4117c3f795ddfd0d2 "nfsd4: move rq_flavor into svc_cred" forgot to remove cl_flavor from the client, leaving two places (cl_flavor and cl_cred.cr_flavor) for the flavor to be stored. After that patch, the latter was the one that was updated, but the former was the one that the callback used. Symptoms were a long delay on utime(). This is because the utime() generated a setattr which recalled a delegation, but the cb_recall was ignored by the client because it had the wrong security flavor. Cc: stable@vger.kernel.org Tested-by: Jamie Heilman Reported-by: Jamie Heilman Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4callback.c | 4 ++-- fs/nfsd/state.h | 1 - 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index cbaf4f8bb7b..4c7bd35b187 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -651,12 +651,12 @@ static int setup_callback_client(struct nfs4_client *clp, struct nfs4_cb_conn *c if (clp->cl_minorversion == 0) { if (!clp->cl_cred.cr_principal && - (clp->cl_flavor >= RPC_AUTH_GSS_KRB5)) + (clp->cl_cred.cr_flavor >= RPC_AUTH_GSS_KRB5)) return -EINVAL; args.client_name = clp->cl_cred.cr_principal; args.prognumber = conn->cb_prog, args.protocol = XPRT_TRANSPORT_TCP; - args.authflavor = clp->cl_flavor; + args.authflavor = clp->cl_cred.cr_flavor; clp->cl_cb_ident = conn->cb_ident; } else { if (!conn->cb_xprt) diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h index e6173147f98..22bd0a66c35 100644 --- a/fs/nfsd/state.h +++ b/fs/nfsd/state.h @@ -231,7 +231,6 @@ struct nfs4_client { nfs4_verifier cl_verifier; /* generated by client */ time_t cl_time; /* time of last lease renewal */ struct sockaddr_storage cl_addr; /* client ipaddress */ - u32 cl_flavor; /* setclientid pseudoflavor */ struct svc_cred cl_cred; /* setclientid principal */ clientid_t cl_clientid; /* generated by server */ nfs4_verifier cl_confirm; /* generated by server */ -- cgit v1.2.3-70-g09d2 From be1e44441a560c43c136a562d49a1c9623c91197 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 9 Aug 2012 18:12:28 -0400 Subject: svcrpc: fix BUG() in svc_tcp_clear_pages Examination of svc_tcp_clear_pages shows that it assumes sk_tcplen is consistent with sk_pages[] (in particular, sk_pages[n] can't be NULL if sk_tcplen would lead us to expect n pages of data). svc_tcp_restore_pages zeroes out sk_pages[] while leaving sk_tcplen. This is OK, since both functions are serialized by XPT_BUSY. However, that means the inconsistency must be repaired before dropping XPT_BUSY. Therefore we should be ensuring that svc_tcp_save_pages repairs the problem before exiting svc_tcp_recv_record on error. Symptoms were a BUG() in svc_tcp_clear_pages. Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- net/sunrpc/svcsock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 18bc130255a..998aa8c1807 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -1129,9 +1129,9 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) if (len >= 0) svsk->sk_tcplen += len; if (len != want) { + svc_tcp_save_pages(svsk, rqstp); if (len < 0 && len != -EAGAIN) goto err_other; - svc_tcp_save_pages(svsk, rqstp); dprintk("svc: incomplete TCP record (%d of %d)\n", svsk->sk_tcplen, svsk->sk_reclen); goto err_noclose; -- cgit v1.2.3-70-g09d2 From f06f00a24d76e168ecb38d352126fd203937b601 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 20 Aug 2012 16:04:40 -0400 Subject: svcrpc: sends on closed socket should stop immediately svc_tcp_sendto sets XPT_CLOSE if we fail to transmit the entire reply. However, the XPT_CLOSE won't be acted on immediately. Meanwhile other threads could send further replies before the socket is really shut down. This can manifest as data corruption: for example, if a truncated read reply is followed by another rpc reply, that second reply will look to the client like further read data. Symptoms were data corruption preceded by svc_tcp_sendto logging something like kernel: rpc-srv/tcp: nfsd: sent only 963696 when sending 1048708 bytes - shutting down socket Cc: stable@vger.kernel.org Reported-by: Malahal Naineni Tested-by: Malahal Naineni Signed-off-by: J. Bruce Fields --- net/sunrpc/svc_xprt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c index 88f2bf67196..0d693a89434 100644 --- a/net/sunrpc/svc_xprt.c +++ b/net/sunrpc/svc_xprt.c @@ -794,7 +794,8 @@ int svc_send(struct svc_rqst *rqstp) /* Grab mutex to serialize outgoing data. */ mutex_lock(&xprt->xpt_mutex); - if (test_bit(XPT_DEAD, &xprt->xpt_flags)) + if (test_bit(XPT_DEAD, &xprt->xpt_flags) + || test_bit(XPT_CLOSE, &xprt->xpt_flags)) len = -ENOTCONN; else len = xprt->xpt_ops->xpo_sendto(rqstp); -- cgit v1.2.3-70-g09d2 From d10f27a750312ed5638c876e4bd6aa83664cccd8 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 17 Aug 2012 17:31:53 -0400 Subject: svcrpc: fix svc_xprt_enqueue/svc_recv busy-looping The rpc server tries to ensure that there will be room to send a reply before it receives a request. It does this by tracking, in xpt_reserved, an upper bound on the total size of the replies that is has already committed to for the socket. Currently it is adding in the estimate for a new reply *before* it checks whether there is space available. If it finds that there is not space, it then subtracts the estimate back out. This may lead the subsequent svc_xprt_enqueue to decide that there is space after all. The results is a svc_recv() that will repeatedly return -EAGAIN, causing server threads to loop without doing any actual work. Cc: stable@vger.kernel.org Reported-by: Michael Tokarev Tested-by: Michael Tokarev Signed-off-by: J. Bruce Fields --- net/sunrpc/svc_xprt.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c index 0d693a89434..bac973a3136 100644 --- a/net/sunrpc/svc_xprt.c +++ b/net/sunrpc/svc_xprt.c @@ -316,7 +316,6 @@ static bool svc_xprt_has_something_to_do(struct svc_xprt *xprt) */ void svc_xprt_enqueue(struct svc_xprt *xprt) { - struct svc_serv *serv = xprt->xpt_server; struct svc_pool *pool; struct svc_rqst *rqstp; int cpu; @@ -362,8 +361,6 @@ void svc_xprt_enqueue(struct svc_xprt *xprt) rqstp, rqstp->rq_xprt); rqstp->rq_xprt = xprt; svc_xprt_get(xprt); - rqstp->rq_reserved = serv->sv_max_mesg; - atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved); pool->sp_stats.threads_woken++; wake_up(&rqstp->rq_wait); } else { @@ -640,8 +637,6 @@ int svc_recv(struct svc_rqst *rqstp, long timeout) if (xprt) { rqstp->rq_xprt = xprt; svc_xprt_get(xprt); - rqstp->rq_reserved = serv->sv_max_mesg; - atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved); /* As there is a shortage of threads and this request * had to be queued, don't allow the thread to wait so @@ -738,6 +733,8 @@ int svc_recv(struct svc_rqst *rqstp, long timeout) else len = xprt->xpt_ops->xpo_recvfrom(rqstp); dprintk("svc: got len=%d\n", len); + rqstp->rq_reserved = serv->sv_max_mesg; + atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved); } svc_xprt_received(xprt); -- cgit v1.2.3-70-g09d2 From 53e1719f3da0f095b8db1461bd12dd79f3246b84 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 20 Aug 2012 21:50:13 +0200 Subject: ALSA: snd-als100: fix suspend/resume snd_card_als100_probe() does not set pcm field in struct snd_sb. As a result, PCM is not suspended and applications don't know that they need to resume the playback. Tested with Labway A381-F20 card (ALS120). Signed-off-by: Ondrej Zary Signed-off-by: Takashi Iwai --- sound/isa/als100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/isa/als100.c b/sound/isa/als100.c index 2d67c78c9f4..f7cdaf51512 100644 --- a/sound/isa/als100.c +++ b/sound/isa/als100.c @@ -233,7 +233,7 @@ static int __devinit snd_card_als100_probe(int dev, irq[dev], dma8[dev], dma16[dev]); } - if ((error = snd_sb16dsp_pcm(chip, 0, NULL)) < 0) { + if ((error = snd_sb16dsp_pcm(chip, 0, &chip->pcm)) < 0) { snd_card_free(card); return error; } -- cgit v1.2.3-70-g09d2 From c7a3a88c938fbe3d70c2278e082b80eb830d1c58 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 19 Aug 2012 19:10:42 +0200 Subject: uprobes: Fix mmap_region()'s mm->mm_rb corruption if uprobe_mmap() fails This patch fixes: https://bugzilla.redhat.com/show_bug.cgi?id=843640 If mmap_region()->uprobe_mmap() fails, unmap_and_free_vma path does unmap_region() but does not remove the soon-to-be-freed vma from rb tree. Actually there are more problems but this is how William noticed this bug. Perhaps we could do do_munmap() + return in this case, but in fact it is simply wrong to abort if uprobe_mmap() fails. Until at least we move the !UPROBE_COPY_INSN code from install_breakpoint() to uprobe_register(). For example, uprobe_mmap()->install_breakpoint() can fail if the probed insn is not supported (remember, uprobe_register() succeeds if nobody mmaps inode/offset), mmap() should not fail in this case. dup_mmap()->uprobe_mmap() is wrong too by the same reason, fork() can race with uprobe_register() and fail for no reason if it wins the race and does install_breakpoint() first. And, if nothing else, both mmap_region() and dup_mmap() return success if uprobe_mmap() fails. Change them to ignore the error code from uprobe_mmap(). Reported-and-tested-by: William Cohen Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju Cc: # v3.5 Cc: Anton Arapov Cc: William Cohen Cc: Linus Torvalds Link: http://lkml.kernel.org/r/20120819171042.GB26957@redhat.com Signed-off-by: Ingo Molnar --- kernel/fork.c | 4 ++-- mm/mmap.c | 5 ++--- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index 3bd2280d79f..2c8857e1285 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -455,8 +455,8 @@ static int dup_mmap(struct mm_struct *mm, struct mm_struct *oldmm) if (retval) goto out; - if (file && uprobe_mmap(tmp)) - goto out; + if (file) + uprobe_mmap(tmp); } /* a new mm has just been created */ arch_dup_mmap(oldmm, mm); diff --git a/mm/mmap.c b/mm/mmap.c index e3e86914f11..52e08fc9186 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1356,9 +1356,8 @@ out: } else if ((flags & MAP_POPULATE) && !(flags & MAP_NONBLOCK)) make_pages_present(addr, addr + len); - if (file && uprobe_mmap(vma)) - /* matching probes but cannot insert */ - goto unmap_and_free_vma; + if (file) + uprobe_mmap(vma); return addr; -- cgit v1.2.3-70-g09d2 From 73e8712aa02d924844fbd5bd84a2445a1c3f68d7 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 20 Aug 2012 14:10:00 +0300 Subject: UBIFS: remove stale commentary Signed-off-by: Artem Bityutskiy --- fs/ubifs/super.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index c3fa6c5327a..71a197f0f93 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1157,9 +1157,6 @@ static int check_free_space(struct ubifs_info *c) * * This function mounts UBIFS file system. Returns zero in case of success and * a negative error code in case of failure. - * - * Note, the function does not de-allocate resources it it fails half way - * through, and the caller has to do this instead. */ static int mount_ubifs(struct ubifs_info *c) { -- cgit v1.2.3-70-g09d2 From 11e3be0be2a1314e0861304857e7efcaed5d3e54 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 20 Aug 2012 15:16:24 +0300 Subject: UBIFS: fix crash on error path This patch fixes a regression introduced by "4994297 UBIFS: make ubifs_lpt_init clean-up in case of failure" which I've hit while running the 'integck -p' test. When remount the file-system from R/O mode to R/W mode and 'lpt_init_wr()' fails, we free _all_ LPT resources by calling 'ubifs_lpt_free(c, 0)', even those needed for R/O mode. This leads to subsequent crashes, e.g., if we try to unmount the file-system. Cc: stable@vger.kernel.org [v3.5+] Signed-off-by: Artem Bityutskiy --- fs/ubifs/lpt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ubifs/lpt.c b/fs/ubifs/lpt.c index ce33b2beb15..8640920766e 100644 --- a/fs/ubifs/lpt.c +++ b/fs/ubifs/lpt.c @@ -1749,7 +1749,10 @@ int ubifs_lpt_init(struct ubifs_info *c, int rd, int wr) return 0; out_err: - ubifs_lpt_free(c, 0); + if (wr) + ubifs_lpt_free(c, 1); + if (rd) + ubifs_lpt_free(c, 0); return err; } -- cgit v1.2.3-70-g09d2 From c212f4020de7b5d35a71327d1483120a698d60a0 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 21 Aug 2012 13:45:35 +0300 Subject: UBIFS: fix replay regression MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit "d51f17e UBIFS: simplify reply code a bit" introduces a bug with the following symptoms: UBIFS error (pid 1): replay_log_leb: first CS node at LEB 3:0 has wrong commit number 0 expected 1 The issue is that we start replaying the log from UBIFS_LOG_LNUM instead of c->lhead_lnum. This patch fixes that. Reported-by: Uwe Kleine-König Signed-off-by: Artem Bityutskiy --- fs/ubifs/replay.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c index eba46d4a761..94d78fc5d4e 100644 --- a/fs/ubifs/replay.c +++ b/fs/ubifs/replay.c @@ -1026,7 +1026,6 @@ int ubifs_replay_journal(struct ubifs_info *c) c->replaying = 1; lnum = c->ltail_lnum = c->lhead_lnum; - lnum = UBIFS_LOG_LNUM; do { err = replay_log_leb(c, lnum, 0, c->sbuf); if (err == 1) @@ -1035,7 +1034,7 @@ int ubifs_replay_journal(struct ubifs_info *c) if (err) goto out; lnum = ubifs_next_log_lnum(c, lnum); - } while (lnum != UBIFS_LOG_LNUM); + } while (lnum != c->ltail_lnum); err = replay_buds(c); if (err) -- cgit v1.2.3-70-g09d2 From cbe05685c1859e655c663b6ff2d0f71093ee834d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 12 Aug 2012 12:01:34 +0200 Subject: s390: Always use "long" for ssize_t to match size_t On s390x-linux-gcc, __SIZE_TYPE__ expands to "long unsigned int" for both 32-bit s390 and 64-bit s390x, as gcc-4.6.3-nolibc/s390x-linux/lib/gcc/s390x-linux/4.6.3/plugin/include/config/s390/linux.h has #define SIZE_TYPE (TARGET_64BIT ? "long unsigned int" : "long unsigned int") To match this, __kernel_size_t is always set to "long unsigned int". But while __kernel_ssize_t is "long" on 64-bit s390x, it is "int" on 32-bit s390, causing compiler warnings like: fs/quota/quota_tree.c:372:4: warning: format '%zd' expects argument of type 'signed size_t', but argument 4 has type 'ssize_t' [-Wformat] To fix this, __kernel_ssize_t should be "long", irrespective of word size. Signed-off-by: Geert Uytterhoeven Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/posix_types.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/s390/include/asm/posix_types.h b/arch/s390/include/asm/posix_types.h index 7bcc14e395f..bf2a2ad2f80 100644 --- a/arch/s390/include/asm/posix_types.h +++ b/arch/s390/include/asm/posix_types.h @@ -13,6 +13,7 @@ */ typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; #define __kernel_size_t __kernel_size_t typedef unsigned short __kernel_old_dev_t; @@ -25,7 +26,6 @@ typedef unsigned short __kernel_mode_t; typedef unsigned short __kernel_ipc_pid_t; typedef unsigned short __kernel_uid_t; typedef unsigned short __kernel_gid_t; -typedef int __kernel_ssize_t; typedef int __kernel_ptrdiff_t; #else /* __s390x__ */ @@ -35,7 +35,6 @@ typedef unsigned int __kernel_mode_t; typedef int __kernel_ipc_pid_t; typedef unsigned int __kernel_uid_t; typedef unsigned int __kernel_gid_t; -typedef long __kernel_ssize_t; typedef long __kernel_ptrdiff_t; typedef unsigned long __kernel_sigset_t; /* at least 32 bits */ -- cgit v1.2.3-70-g09d2 From 3ab484b8622b7b890ca8d2ab5ee034c217ee4eeb Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 14 Aug 2012 14:17:30 -0300 Subject: perf tools: Add missing files to build the python binding MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Changeset 0f6a3015: "perf tools: Support user regs and stack in sample parsing" uses hweight_long in evsel.c, so we need to drag util/hweight.c to the python binding. Ditto for ee8dd3c: "perf tools: Change strlist to use the new rblist" where we need to add util/rblist.c. Now twatch.py works again: # export PYTHONPATH=~acme/git/build/perf/python/ # ~acme/git/linux/tools/perf/python/twatch.py cpu: 4, pid: 23639, tid: 23639 { type: fork, pid: 30659, ppid: 23639, tid: 30659, ptid: 23639, time: 36287872076780} cpu: 5, pid: 30659, tid: 30659 { type: comm, pid: 30659, tid: 30659, comm: ls } cpu: 5, pid: 30659, tid: 30659 { type: exit, pid: 30659, ppid: 30659, tid: 30659, ptid: 30659, time: 36287873681539} cpu: 4, pid: 23639, tid: 23639 { type: fork, pid: 30660, ppid: 23639, tid: 30660, ptid: 23639, time: 36291720420480} cpu: 5, pid: 30659, tid: 30659 { type: exit, pid: 30659, ppid: 30659, tid: 30659, ptid: 30659, time: 36287873685714} cpu: 5, pid: 30660, tid: 30660 { type: comm, pid: 30660, tid: 30660, comm: git } ^C KeyboardInterrupt Reported-by: Jérôme Carretero Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-gmq82zp5blin9aml9g5tzokr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/python-ext-sources | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/python-ext-sources b/tools/perf/util/python-ext-sources index 2884e67ee62..213362850ab 100644 --- a/tools/perf/util/python-ext-sources +++ b/tools/perf/util/python-ext-sources @@ -10,10 +10,12 @@ util/ctype.c util/evlist.c util/evsel.c util/cpumap.c +util/hweight.c util/thread_map.c util/util.c util/xyarray.c util/cgroup.c util/debugfs.c +util/rblist.c util/strlist.c ../../lib/rbtree.c -- cgit v1.2.3-70-g09d2 From 676bc2e1e4f9072f7a640d5b7c99ffdf9709a6e7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 21 Aug 2012 09:55:01 -0400 Subject: Revert "drm/radeon: fix bo creation retry path" This reverts commit d1c7871ddb1f588b8eb35affd9ee1a3d5e11cd0c. ttm_bo_init() destroys the BO on failure. So this patch makes the retry path work with freed memory. This ends up causing kernel panics when this path is hit. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_object.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 1cb014b571a..9024e722283 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -132,6 +132,7 @@ int radeon_bo_create(struct radeon_device *rdev, acc_size = ttm_bo_dma_acc_size(&rdev->mman.bdev, size, sizeof(struct radeon_bo)); +retry: bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL); if (bo == NULL) return -ENOMEM; @@ -145,8 +146,6 @@ int radeon_bo_create(struct radeon_device *rdev, bo->surface_reg = -1; INIT_LIST_HEAD(&bo->list); INIT_LIST_HEAD(&bo->va); - -retry: radeon_ttm_placement_from_domain(bo, domain); /* Kernel allocation are uninterruptible */ down_read(&rdev->pm.mclk_lock); -- cgit v1.2.3-70-g09d2 From ec5da7f8dc023fc4dcbdd42e87dad231d2c2812d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 21 Aug 2012 16:40:07 +1000 Subject: fbcon: fix race condition between console lock and cursor timer So we've had a fair few reports of fbcon handover breakage between efi/vesafb and i915 surface recently, so I dedicated a couple of days to finding the problem. Essentially the last thing we saw was the conflicting framebuffer message and that was all. So after much tracing with direct netconsole writes (printks under console_lock not so useful), I think I found the race. Thread A (driver load) Thread B (timer thread) unbind_con_driver -> | bind_con_driver -> | vc->vc_sw->con_deinit -> | fbcon_deinit -> | console_lock() | | | | fbcon_flashcursor timer fires | console_lock() <- blocked for A | | fbcon_del_cursor_timer -> del_timer_sync (BOOM) Of course because all of this is under the console lock, we never see anything, also since we also just unbound the active console guess what we never see anything. Hopefully this fixes the problem for anyone seeing vesafb->kms driver handoff. Signed-off-by: David Airlie Acked-by: Alan Cox Cc: stable@vger.kernel.org Tested-by: Josh Boyer Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 2e471c22abf..f8a79fca4a2 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -372,8 +372,12 @@ static void fb_flashcursor(struct work_struct *work) struct vc_data *vc = NULL; int c; int mode; + int ret; + + ret = console_trylock(); + if (ret == 0) + return; - console_lock(); if (ops && ops->currcon != -1) vc = vc_cons[ops->currcon].d; -- cgit v1.2.3-70-g09d2 From f341861fb0b701139849f8a85c2d3cdff466e8e8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 21 Aug 2012 15:05:14 +0200 Subject: task_work: add a scheduling point in task_work_run() It seems commit 4a9d4b024a31 ("switch fput to task_work_add") re- introduced the problem addressed in 944be0b22472 ("close_files(): add scheduling point") If a server process with a lot of files (say 2 million tcp sockets) is killed, we can spend a lot of time in task_work_run() and trigger a soft lockup. Signed-off-by: Eric Dumazet Signed-off-by: Linus Torvalds --- kernel/task_work.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/task_work.c b/kernel/task_work.c index 91d4e1742a0..d320d44903b 100644 --- a/kernel/task_work.c +++ b/kernel/task_work.c @@ -75,6 +75,7 @@ void task_work_run(void) p = q->next; q->func(q); q = p; + cond_resched(); } } } -- cgit v1.2.3-70-g09d2 From af74115eed22698f771fec1287a864975c9a6671 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 15 Aug 2012 21:24:52 -0700 Subject: target: Remove unused se_cmd.cmd_spdtl This was originally for helping fabrics to determine overflow/underflow status, and has been superceeded by SCF_OVERFLOW_BIT + SCF_UNDERFLOW_BIT. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 2 -- include/target/target_core_base.h | 2 -- 2 files changed, 4 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index ea9a3d2e4f5..4de3186dc44 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1165,8 +1165,6 @@ int target_cmd_size_check(struct se_cmd *cmd, unsigned int size) " 0x%02x\n", cmd->se_tfo->get_fabric_name(), cmd->data_length, size, cmd->t_task_cdb[0]); - cmd->cmd_spdtl = size; - if (cmd->data_direction == DMA_TO_DEVICE) { pr_err("Rejecting underflow/overflow" " WRITE data\n"); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 128ce46fa48..015cea01ae3 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -503,8 +503,6 @@ struct se_cmd { u32 se_ordered_id; /* Total size in bytes associated with command */ u32 data_length; - /* SCSI Presented Data Transfer Length */ - u32 cmd_spdtl; u32 residual_count; u32 orig_fe_lun; /* Persistent Reservation key */ -- cgit v1.2.3-70-g09d2 From 144d56e91044181ec0ef67aeca91e9a8b5718348 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 20 Aug 2012 00:22:46 +0000 Subject: tcp: fix possible socket refcount problem Commit 6f458dfb40 (tcp: improve latencies of timer triggered events) added bug leading to following trace : [ 2866.131281] IPv4: Attempt to release TCP socket in state 1 ffff880019ec0000 [ 2866.131726] [ 2866.132188] ========================= [ 2866.132281] [ BUG: held lock freed! ] [ 2866.132281] 3.6.0-rc1+ #622 Not tainted [ 2866.132281] ------------------------- [ 2866.132281] kworker/0:1/652 is freeing memory ffff880019ec0000-ffff880019ec0a1f, with a lock still held there! [ 2866.132281] (sk_lock-AF_INET-RPC){+.+...}, at: [] tcp_sendmsg+0x29/0xcc6 [ 2866.132281] 4 locks held by kworker/0:1/652: [ 2866.132281] #0: (rpciod){.+.+.+}, at: [] process_one_work+0x1de/0x47f [ 2866.132281] #1: ((&task->u.tk_work)){+.+.+.}, at: [] process_one_work+0x1de/0x47f [ 2866.132281] #2: (sk_lock-AF_INET-RPC){+.+...}, at: [] tcp_sendmsg+0x29/0xcc6 [ 2866.132281] #3: (&icsk->icsk_retransmit_timer){+.-...}, at: [] run_timer_softirq+0x1ad/0x35f [ 2866.132281] [ 2866.132281] stack backtrace: [ 2866.132281] Pid: 652, comm: kworker/0:1 Not tainted 3.6.0-rc1+ #622 [ 2866.132281] Call Trace: [ 2866.132281] [] debug_check_no_locks_freed+0x112/0x159 [ 2866.132281] [] ? __sk_free+0xfd/0x114 [ 2866.132281] [] kmem_cache_free+0x6b/0x13a [ 2866.132281] [] __sk_free+0xfd/0x114 [ 2866.132281] [] sk_free+0x1c/0x1e [ 2866.132281] [] tcp_write_timer+0x51/0x56 [ 2866.132281] [] run_timer_softirq+0x218/0x35f [ 2866.132281] [] ? run_timer_softirq+0x1ad/0x35f [ 2866.132281] [] ? rb_commit+0x58/0x85 [ 2866.132281] [] ? tcp_write_timer_handler+0x148/0x148 [ 2866.132281] [] __do_softirq+0xcb/0x1f9 [ 2866.132281] [] ? _raw_spin_unlock+0x29/0x2e [ 2866.132281] [] call_softirq+0x1c/0x30 [ 2866.132281] [] do_softirq+0x4a/0xa6 [ 2866.132281] [] irq_exit+0x51/0xad [ 2866.132281] [] do_IRQ+0x9d/0xb4 [ 2866.132281] [] common_interrupt+0x6f/0x6f [ 2866.132281] [] ? sched_clock_cpu+0x58/0xd1 [ 2866.132281] [] ? _raw_spin_unlock_irqrestore+0x4c/0x56 [ 2866.132281] [] mod_timer+0x178/0x1a9 [ 2866.132281] [] sk_reset_timer+0x19/0x26 [ 2866.132281] [] tcp_rearm_rto+0x99/0xa4 [ 2866.132281] [] tcp_event_new_data_sent+0x6e/0x70 [ 2866.132281] [] tcp_write_xmit+0x7de/0x8e4 [ 2866.132281] [] ? __alloc_skb+0xa0/0x1a1 [ 2866.132281] [] __tcp_push_pending_frames+0x2e/0x8a [ 2866.132281] [] tcp_sendmsg+0xb32/0xcc6 [ 2866.132281] [] inet_sendmsg+0xaa/0xd5 [ 2866.132281] [] ? inet_autobind+0x5f/0x5f [ 2866.132281] [] ? trace_clock_local+0x9/0xb [ 2866.132281] [] sock_sendmsg+0xa3/0xc4 [ 2866.132281] [] ? rb_reserve_next_event+0x26f/0x2d5 [ 2866.132281] [] ? native_sched_clock+0x29/0x6f [ 2866.132281] [] ? sched_clock+0x9/0xd [ 2866.132281] [] ? trace_clock_local+0x9/0xb [ 2866.132281] [] kernel_sendmsg+0x37/0x43 [ 2866.132281] [] xs_send_kvec+0x77/0x80 [ 2866.132281] [] xs_sendpages+0x6f/0x1a0 [ 2866.132281] [] ? try_to_del_timer_sync+0x55/0x61 [ 2866.132281] [] xs_tcp_send_request+0x55/0xf1 [ 2866.132281] [] xprt_transmit+0x89/0x1db [ 2866.132281] [] ? call_connect+0x3c/0x3c [ 2866.132281] [] call_transmit+0x1c5/0x20e [ 2866.132281] [] __rpc_execute+0x6f/0x225 [ 2866.132281] [] ? call_connect+0x3c/0x3c [ 2866.132281] [] rpc_async_schedule+0x28/0x34 [ 2866.132281] [] process_one_work+0x24d/0x47f [ 2866.132281] [] ? process_one_work+0x1de/0x47f [ 2866.132281] [] ? __rpc_execute+0x225/0x225 [ 2866.132281] [] worker_thread+0x236/0x317 [ 2866.132281] [] ? process_scheduled_works+0x2f/0x2f [ 2866.132281] [] kthread+0x9a/0xa2 [ 2866.132281] [] kernel_thread_helper+0x4/0x10 [ 2866.132281] [] ? retint_restore_args+0x13/0x13 [ 2866.132281] [] ? __init_kthread_worker+0x5a/0x5a [ 2866.132281] [] ? gs_change+0x13/0x13 [ 2866.308506] IPv4: Attempt to release TCP socket in state 1 ffff880019ec0000 [ 2866.309689] ============================================================================= [ 2866.310254] BUG TCP (Not tainted): Object already free [ 2866.310254] ----------------------------------------------------------------------------- [ 2866.310254] The bug comes from the fact that timer set in sk_reset_timer() can run before we actually do the sock_hold(). socket refcount reaches zero and we free the socket too soon. timer handler is not allowed to reduce socket refcnt if socket is owned by the user, or we need to change sk_reset_timer() implementation. We should take a reference on the socket in case TCP_DELACK_TIMER_DEFERRED or TCP_DELACK_TIMER_DEFERRED bit are set in tsq_flags Also fix a typo in tcp_delack_timer(), where TCP_WRITE_TIMER_DEFERRED was used instead of TCP_DELACK_TIMER_DEFERRED. For consistency, use same socket refcount change for TCP_MTU_REDUCED_DEFERRED, even if not fired from a timer. Reported-by: Fengguang Wu Tested-by: Fengguang Wu Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 8 +++++--- net/ipv4/tcp_output.c | 14 +++++++++----- net/ipv4/tcp_timer.c | 6 ++++-- 3 files changed, 18 insertions(+), 10 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 5bf2040b25b..00a748d1406 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -417,10 +417,12 @@ void tcp_v4_err(struct sk_buff *icmp_skb, u32 info) if (code == ICMP_FRAG_NEEDED) { /* PMTU discovery (RFC1191) */ tp->mtu_info = info; - if (!sock_owned_by_user(sk)) + if (!sock_owned_by_user(sk)) { tcp_v4_mtu_reduced(sk); - else - set_bit(TCP_MTU_REDUCED_DEFERRED, &tp->tsq_flags); + } else { + if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED, &tp->tsq_flags)) + sock_hold(sk); + } goto out; } diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 20dfd892c86..d04632673a9 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -910,14 +910,18 @@ void tcp_release_cb(struct sock *sk) if (flags & (1UL << TCP_TSQ_DEFERRED)) tcp_tsq_handler(sk); - if (flags & (1UL << TCP_WRITE_TIMER_DEFERRED)) + if (flags & (1UL << TCP_WRITE_TIMER_DEFERRED)) { tcp_write_timer_handler(sk); - - if (flags & (1UL << TCP_DELACK_TIMER_DEFERRED)) + __sock_put(sk); + } + if (flags & (1UL << TCP_DELACK_TIMER_DEFERRED)) { tcp_delack_timer_handler(sk); - - if (flags & (1UL << TCP_MTU_REDUCED_DEFERRED)) + __sock_put(sk); + } + if (flags & (1UL << TCP_MTU_REDUCED_DEFERRED)) { sk->sk_prot->mtu_reduced(sk); + __sock_put(sk); + } } EXPORT_SYMBOL(tcp_release_cb); diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c index 6df36ad55a3..b774a03bd1d 100644 --- a/net/ipv4/tcp_timer.c +++ b/net/ipv4/tcp_timer.c @@ -252,7 +252,8 @@ static void tcp_delack_timer(unsigned long data) inet_csk(sk)->icsk_ack.blocked = 1; NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_DELAYEDACKLOCKED); /* deleguate our work to tcp_release_cb() */ - set_bit(TCP_WRITE_TIMER_DEFERRED, &tcp_sk(sk)->tsq_flags); + if (!test_and_set_bit(TCP_DELACK_TIMER_DEFERRED, &tcp_sk(sk)->tsq_flags)) + sock_hold(sk); } bh_unlock_sock(sk); sock_put(sk); @@ -481,7 +482,8 @@ static void tcp_write_timer(unsigned long data) tcp_write_timer_handler(sk); } else { /* deleguate our work to tcp_release_cb() */ - set_bit(TCP_WRITE_TIMER_DEFERRED, &tcp_sk(sk)->tsq_flags); + if (!test_and_set_bit(TCP_WRITE_TIMER_DEFERRED, &tcp_sk(sk)->tsq_flags)) + sock_hold(sk); } bh_unlock_sock(sk); sock_put(sk); -- cgit v1.2.3-70-g09d2 From 1a7b27c97ce675b42eeb7bfaf6e15c34f35c8f95 Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Mon, 20 Aug 2012 02:52:09 +0000 Subject: ipv4: Use newinet->inet_opt in inet_csk_route_child_sock() Since 0e734419923bd ("ipv4: Use inet_csk_route_child_sock() in DCCP and TCP."), inet_csk_route_child_sock() is called instead of inet_csk_route_req(). However, after creating the child-sock in tcp/dccp_v4_syn_recv_sock(), ireq->opt is set to NULL, before calling inet_csk_route_child_sock(). Thus, inside inet_csk_route_child_sock() opt is always NULL and the SRR-options are not respected anymore. Packets sent by the server won't have the correct destination-IP. This patch fixes it by accessing newinet->inet_opt instead of ireq->opt inside inet_csk_route_child_sock(). Reported-by: Luca Boccassi Signed-off-by: Christoph Paasch Signed-off-by: David S. Miller --- net/ipv4/inet_connection_sock.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index db0cf17c00f..7f75f21d7b8 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -404,12 +404,15 @@ struct dst_entry *inet_csk_route_child_sock(struct sock *sk, { const struct inet_request_sock *ireq = inet_rsk(req); struct inet_sock *newinet = inet_sk(newsk); - struct ip_options_rcu *opt = ireq->opt; + struct ip_options_rcu *opt; struct net *net = sock_net(sk); struct flowi4 *fl4; struct rtable *rt; fl4 = &newinet->cork.fl.u.ip4; + + rcu_read_lock(); + opt = rcu_dereference(newinet->inet_opt); flowi4_init_output(fl4, sk->sk_bound_dev_if, sk->sk_mark, RT_CONN_FLAGS(sk), RT_SCOPE_UNIVERSE, sk->sk_protocol, inet_sk_flowi_flags(sk), @@ -421,11 +424,13 @@ struct dst_entry *inet_csk_route_child_sock(struct sock *sk, goto no_route; if (opt && opt->opt.is_strictroute && rt->rt_gateway) goto route_err; + rcu_read_unlock(); return &rt->dst; route_err: ip_rt_put(rt); no_route: + rcu_read_unlock(); IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES); return NULL; } -- cgit v1.2.3-70-g09d2 From a9915a1b52df52ad87f3b33422da95cf25372f09 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 20 Aug 2012 07:26:45 +0000 Subject: ipv4: fix ip header ident selection in __ip_make_skb() Christian Casteyde reported a kmemcheck 32-bit read from uninitialized memory in __ip_select_ident(). It turns out that __ip_make_skb() called ip_select_ident() before properly initializing iph->daddr. This is a bug uncovered by commit 1d861aa4b3fb (inet: Minimize use of cached route inetpeer.) Addresses https://bugzilla.kernel.org/show_bug.cgi?id=46131 Reported-by: Christian Casteyde Signed-off-by: Eric Dumazet Cc: Stephen Hemminger Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 147ccc3e93d..c196d749daf 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1338,10 +1338,10 @@ struct sk_buff *__ip_make_skb(struct sock *sk, iph->ihl = 5; iph->tos = inet->tos; iph->frag_off = df; - ip_select_ident(iph, &rt->dst, sk); iph->ttl = ttl; iph->protocol = sk->sk_protocol; ip_copy_addrs(iph, fl4); + ip_select_ident(iph, &rt->dst, sk); if (opt) { iph->ihl += opt->optlen>>2; -- cgit v1.2.3-70-g09d2 From e0e3cea46d31d23dc40df0a49a7a2c04fe8edfea Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 21 Aug 2012 06:21:17 +0000 Subject: af_netlink: force credentials passing [CVE-2012-3520] Pablo Neira Ayuso discovered that avahi and potentially NetworkManager accept spoofed Netlink messages because of a kernel bug. The kernel passes all-zero SCM_CREDENTIALS ancillary data to the receiver if the sender did not provide such data, instead of not including any such data at all or including the correct data from the peer (as it is the case with AF_UNIX). This bug was introduced in commit 16e572626961 (af_unix: dont send SCM_CREDENTIALS by default) This patch forces passing credentials for netlink, as before the regression. Another fix would be to not add SCM_CREDENTIALS in netlink messages if not provided by the sender, but it might break some programs. With help from Florian Weimer & Petr Matousek This issue is designated as CVE-2012-3520 Signed-off-by: Eric Dumazet Cc: Petr Matousek Cc: Florian Weimer Cc: Pablo Neira Ayuso Signed-off-by: David S. Miller --- include/net/scm.h | 4 +++- net/netlink/af_netlink.c | 2 +- net/unix/af_unix.c | 4 ++-- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/include/net/scm.h b/include/net/scm.h index 079d7887dac..7dc0854f0b3 100644 --- a/include/net/scm.h +++ b/include/net/scm.h @@ -70,9 +70,11 @@ static __inline__ void scm_destroy(struct scm_cookie *scm) } static __inline__ int scm_send(struct socket *sock, struct msghdr *msg, - struct scm_cookie *scm) + struct scm_cookie *scm, bool forcecreds) { memset(scm, 0, sizeof(*scm)); + if (forcecreds) + scm_set_cred(scm, task_tgid(current), current_cred()); unix_get_peersec_dgram(sock, scm); if (msg->msg_controllen <= 0) return 0; diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 5463969da45..1445d73533e 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1362,7 +1362,7 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock, if (NULL == siocb->scm) siocb->scm = &scm; - err = scm_send(sock, msg, siocb->scm); + err = scm_send(sock, msg, siocb->scm, true); if (err < 0) return err; diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index e4768c180da..c5ee4ff6136 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1450,7 +1450,7 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock, if (NULL == siocb->scm) siocb->scm = &tmp_scm; wait_for_unix_gc(); - err = scm_send(sock, msg, siocb->scm); + err = scm_send(sock, msg, siocb->scm, false); if (err < 0) return err; @@ -1619,7 +1619,7 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock, if (NULL == siocb->scm) siocb->scm = &tmp_scm; wait_for_unix_gc(); - err = scm_send(sock, msg, siocb->scm); + err = scm_send(sock, msg, siocb->scm, false); if (err < 0) return err; -- cgit v1.2.3-70-g09d2 From 9974e43d900af7979e0a571b8e0c9674c7399b79 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 21 Aug 2012 17:20:30 +0200 Subject: ide: fix generic_ide_suspend/resume Oops This patch fixes a regresion introduced by commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Suspend oopses in generic_ide_suspend() because dev_get_drvdata() returns NULL (dev->p->driver_data == NULL) and this function is not prepared for this. Fix is based on Alan Stern's suggestion. Signed-off-by: Miklos Szeredi Acked-by: Rafael J. Wysocki Signed-off-by: David S. Miller --- drivers/ide/ide-pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index 92406097efe..8d1e32d7cd9 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -4,7 +4,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) { - ide_drive_t *drive = dev_get_drvdata(dev); + ide_drive_t *drive = to_ide_device(dev); ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; @@ -40,7 +40,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) int generic_ide_resume(struct device *dev) { - ide_drive_t *drive = dev_get_drvdata(dev); + ide_drive_t *drive = to_ide_device(dev); ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; -- cgit v1.2.3-70-g09d2 From 5317670692f61675394db2eb6713484b67383750 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 21 Aug 2012 18:52:56 -0400 Subject: drm/radeon/ss: use num_crtc rather than hardcoded 6 When checking if a pll is in use. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index cb18813c7df..f4d4505fe83 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -452,7 +452,7 @@ static void atombios_crtc_program_ss(struct radeon_device *rdev, union atom_enable_ss args; if (!enable) { - for (i = 0; i < 6; i++) { + for (i = 0; i < rdev->num_crtc; i++) { if (rdev->mode_info.crtcs[i] && rdev->mode_info.crtcs[i]->enabled && i != crtc_id && -- cgit v1.2.3-70-g09d2 From 6c5e50fa614fea5325a2973be06f7ec6f1055316 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 21 Aug 2012 15:55:25 -0700 Subject: ceph: tolerate (and warn on) extraneous dentry from mds If the MDS gives us a dentry and we weren't prepared to handle it, WARN_ON_ONCE instead of crashing. Reported-by: Yan, Zheng Signed-off-by: Sage Weil Reviewed-by: Alex Elder --- fs/ceph/inode.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 9fff9f3b17e..4b5762ef7c2 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -992,11 +992,15 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req, if (rinfo->head->is_dentry) { struct inode *dir = req->r_locked_dir; - err = fill_inode(dir, &rinfo->diri, rinfo->dirfrag, - session, req->r_request_started, -1, - &req->r_caps_reservation); - if (err < 0) - return err; + if (dir) { + err = fill_inode(dir, &rinfo->diri, rinfo->dirfrag, + session, req->r_request_started, -1, + &req->r_caps_reservation); + if (err < 0) + return err; + } else { + WARN_ON_ONCE(1); + } } /* @@ -1004,6 +1008,7 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req, * will have trouble splicing in the virtual snapdir later */ if (rinfo->head->is_dentry && !req->r_aborted && + req->r_locked_dir && (rinfo->head->is_target || strncmp(req->r_dentry->d_name.name, fsc->mount_options->snapdir_name, req->r_dentry->d_name.len))) { -- cgit v1.2.3-70-g09d2 From 6d4221b53707486dfad3f5bfe568d2ce7f4c9863 Mon Sep 17 00:00:00 2001 From: Jim Schutt Date: Fri, 10 Aug 2012 10:37:38 -0700 Subject: libceph: avoid truncation due to racing banners Because the Ceph client messenger uses a non-blocking connect, it is possible for the sending of the client banner to race with the arrival of the banner sent by the peer. When ceph_sock_state_change() notices the connect has completed, it schedules work to process the socket via con_work(). During this time the peer is writing its banner, and arrival of the peer banner races with con_work(). If con_work() calls try_read() before the peer banner arrives, there is nothing for it to do, after which con_work() calls try_write() to send the client's banner. In this case Ceph's protocol negotiation can complete succesfully. The server-side messenger immediately sends its banner and addresses after accepting a connect request, *before* actually attempting to read or verify the banner from the client. As a result, it is possible for the banner from the server to arrive before con_work() calls try_read(). If that happens, try_read() will read the banner and prepare protocol negotiation info via prepare_write_connect(). prepare_write_connect() calls con_out_kvec_reset(), which discards the as-yet-unsent client banner. Next, con_work() calls try_write(), which sends the protocol negotiation info rather than the banner that the peer is expecting. The result is that the peer sees an invalid banner, and the client reports "negotiation failed". Fix this by moving con_out_kvec_reset() out of prepare_write_connect() to its callers at all locations except the one where the banner might still need to be sent. [elder@inktak.com: added note about server-side behavior] Signed-off-by: Jim Schutt Reviewed-by: Alex Elder --- net/ceph/messenger.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index b9796750034..24c5eea8c45 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -915,7 +915,6 @@ static int prepare_write_connect(struct ceph_connection *con) con->out_connect.authorizer_len = auth ? cpu_to_le32(auth->authorizer_buf_len) : 0; - con_out_kvec_reset(con); con_out_kvec_add(con, sizeof (con->out_connect), &con->out_connect); if (auth && auth->authorizer_buf_len) @@ -1557,6 +1556,7 @@ static int process_connect(struct ceph_connection *con) return -1; } con->auth_retry = 1; + con_out_kvec_reset(con); ret = prepare_write_connect(con); if (ret < 0) return ret; @@ -1577,6 +1577,7 @@ static int process_connect(struct ceph_connection *con) ENTITY_NAME(con->peer_name), ceph_pr_addr(&con->peer_addr.in_addr)); reset_connection(con); + con_out_kvec_reset(con); ret = prepare_write_connect(con); if (ret < 0) return ret; @@ -1601,6 +1602,7 @@ static int process_connect(struct ceph_connection *con) le32_to_cpu(con->out_connect.connect_seq), le32_to_cpu(con->in_reply.connect_seq)); con->connect_seq = le32_to_cpu(con->in_reply.connect_seq); + con_out_kvec_reset(con); ret = prepare_write_connect(con); if (ret < 0) return ret; @@ -1617,6 +1619,7 @@ static int process_connect(struct ceph_connection *con) le32_to_cpu(con->in_reply.global_seq)); get_global_seq(con->msgr, le32_to_cpu(con->in_reply.global_seq)); + con_out_kvec_reset(con); ret = prepare_write_connect(con); if (ret < 0) return ret; @@ -2135,7 +2138,11 @@ more: BUG_ON(con->state != CON_STATE_CONNECTING); con->state = CON_STATE_NEGOTIATING; - /* Banner is good, exchange connection info */ + /* + * Received banner is good, exchange connection info. + * Do not reset out_kvec, as sending our banner raced + * with receiving peer banner after connect completed. + */ ret = prepare_write_connect(con); if (ret < 0) goto out; -- cgit v1.2.3-70-g09d2 From 45f2e081f573526977abfa781a12728f83e9641f Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 21 Aug 2012 12:11:51 -0700 Subject: ceph: avoid divide by zero in __validate_layout() If "l->stripe_unit" is zero the the mod on the next line will cause a divide by zero bug. This comes from the copy_from_user() in ceph_ioctl_set_layout_policy(). Passing 0 is valid, though (it means "do not change") so avoid the % check in that case. Reported-by: Dan Carpenter Signed-off-by: Sage Weil Reviewed-by: Alex Elder --- fs/ceph/ioctl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ceph/ioctl.c b/fs/ceph/ioctl.c index 8e3fb69fbe6..1396ceb4679 100644 --- a/fs/ceph/ioctl.c +++ b/fs/ceph/ioctl.c @@ -42,7 +42,8 @@ static long __validate_layout(struct ceph_mds_client *mdsc, /* validate striping parameters */ if ((l->object_size & ~PAGE_MASK) || (l->stripe_unit & ~PAGE_MASK) || - ((unsigned)l->object_size % (unsigned)l->stripe_unit)) + (l->stripe_unit != 0 && + ((unsigned)l->object_size % (unsigned)l->stripe_unit))) return -EINVAL; /* make sure it's a valid data pool */ -- cgit v1.2.3-70-g09d2 From f5869a8308f77e3dfdc2e3640842b285aa788ff8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 20 Aug 2012 14:44:52 +0000 Subject: drm: stop vmgfx driver explosion If you do a page flip with no flags set then event is NULL. If event is NULL then the vmw_gfx driver likes to go digging into NULL and extracts NULL->base.file_priv. On a modern kernel with NULL mapping protection it's just another oops, without it there are some "intriguing" possibilities. What it should do is an open question but that for the driver owners to sort out. Signed-off-by: Alan Cox Reviewed-by: Jakob Bornecrantz Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 6b0078ffa76..c50724bd30f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1688,15 +1688,19 @@ int vmw_du_page_flip(struct drm_crtc *crtc, struct vmw_private *dev_priv = vmw_priv(crtc->dev); struct drm_framebuffer *old_fb = crtc->fb; struct vmw_framebuffer *vfb = vmw_framebuffer_to_vfb(fb); - struct drm_file *file_priv = event->base.file_priv; + struct drm_file *file_priv ; struct vmw_fence_obj *fence = NULL; struct drm_clip_rect clips; int ret; + if (event == NULL) + return -EINVAL; + /* require ScreenObject support for page flipping */ if (!dev_priv->sou_priv) return -ENOSYS; + file_priv = event->base.file_priv; if (!vmw_kms_screen_object_flippable(dev_priv, crtc)) return -EINVAL; -- cgit v1.2.3-70-g09d2 From 04ccfe77f132b973659f11954443214659014072 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Fri, 17 Aug 2012 14:20:02 +0000 Subject: drm: Remove two unused fields from struct drm_display_mode Signed-off-by: Damien Lespiau Reviewed-by: Jani Nikula Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_modes.c | 3 --- include/drm/drm_crtc.h | 2 -- 2 files changed, 5 deletions(-) diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index b7adb4a967f..28637c181b1 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -706,9 +706,6 @@ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags) p->crtc_vblank_end = max(p->crtc_vsync_end, p->crtc_vtotal); p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay); p->crtc_hblank_end = max(p->crtc_hsync_end, p->crtc_htotal); - - p->crtc_hadjusted = false; - p->crtc_vadjusted = false; } EXPORT_SYMBOL(drm_mode_set_crtcinfo); diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index a1a0386e016..ced362533e3 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -166,8 +166,6 @@ struct drm_display_mode { int crtc_vsync_start; int crtc_vsync_end; int crtc_vtotal; - int crtc_hadjusted; - int crtc_vadjusted; /* Driver private mode info */ int private_size; -- cgit v1.2.3-70-g09d2 From d5c2c20e356ddcb597ee7099dc874bdac774884b Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 17 Aug 2012 02:55:48 +0000 Subject: drm/udl: dpms off the crtc when disabled. This turns off the crtc when its been disabled, fixes it not turning off properly the whole time. Signed-off-by: Dave Airlie Reviewed-by: Alex Deucher --- drivers/gpu/drm/udl/udl_modeset.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/udl/udl_modeset.c b/drivers/gpu/drm/udl/udl_modeset.c index f5dd89e891d..9159d48d1df 100644 --- a/drivers/gpu/drm/udl/udl_modeset.c +++ b/drivers/gpu/drm/udl/udl_modeset.c @@ -354,8 +354,7 @@ static int udl_crtc_mode_set(struct drm_crtc *crtc, static void udl_crtc_disable(struct drm_crtc *crtc) { - - + udl_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); } static void udl_crtc_destroy(struct drm_crtc *crtc) -- cgit v1.2.3-70-g09d2 From 27fc4f1c0be917b1e5cef934783f9b09e28e92ea Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 1 Aug 2012 17:15:30 +0530 Subject: drm: Add missing static storage class specifiers in drm_proc.c file Fixes the following sparse warning: drivers/gpu/drm/drm_proc.c:92:5: warning: symbol 'drm_proc_create_files' was not declared. Should it be static? drivers/gpu/drm/drm_proc.c:175:5: warning: symbol 'drm_proc_remove_files' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_proc.c b/drivers/gpu/drm/drm_proc.c index 371c695322d..da457b18eaa 100644 --- a/drivers/gpu/drm/drm_proc.c +++ b/drivers/gpu/drm/drm_proc.c @@ -89,7 +89,7 @@ static const struct file_operations drm_proc_fops = { * Create a given set of proc files represented by an array of * gdm_proc_lists in the given root directory. */ -int drm_proc_create_files(struct drm_info_list *files, int count, +static int drm_proc_create_files(struct drm_info_list *files, int count, struct proc_dir_entry *root, struct drm_minor *minor) { struct drm_device *dev = minor->dev; @@ -172,7 +172,7 @@ int drm_proc_init(struct drm_minor *minor, int minor_id, return 0; } -int drm_proc_remove_files(struct drm_info_list *files, int count, +static int drm_proc_remove_files(struct drm_info_list *files, int count, struct drm_minor *minor) { struct list_head *pos, *q; -- cgit v1.2.3-70-g09d2 From 61e01be22e954f53a4bbac8066015d9f4ab9e42d Mon Sep 17 00:00:00 2001 From: Jens Rottmann Date: Tue, 21 Aug 2012 16:15:43 -0700 Subject: cs5535-clockevt: typo, it's MFGPT, not MFPGT Signed-off-by: Jens Rottmann Cc: Thomas Gleixner Cc: John Stultz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/clocksource/cs5535-clockevt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c index 540795cd076..d9279385304 100644 --- a/drivers/clocksource/cs5535-clockevt.c +++ b/drivers/clocksource/cs5535-clockevt.c @@ -53,7 +53,7 @@ static struct cs5535_mfgpt_timer *cs5535_event_clock; #define MFGPT_PERIODIC (MFGPT_HZ / HZ) /* - * The MFPGT timers on the CS5536 provide us with suitable timers to use + * The MFGPT timers on the CS5536 provide us with suitable timers to use * as clock event sources - not as good as a HPET or APIC, but certainly * better than the PIT. This isn't a general purpose MFGPT driver, but * a simplified one designed specifically to act as a clock event source. @@ -144,7 +144,7 @@ static int __init cs5535_mfgpt_init(void) timer = cs5535_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); if (!timer) { - printk(KERN_ERR DRV_NAME ": Could not allocate MFPGT timer\n"); + printk(KERN_ERR DRV_NAME ": Could not allocate MFGPT timer\n"); return -ENODEV; } cs5535_event_clock = timer; -- cgit v1.2.3-70-g09d2 From f9aed62a2b12a8e04077737c9942111e14ed738e Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Tue, 21 Aug 2012 16:15:45 -0700 Subject: mm: change nr_ptes BUG_ON to WARN_ON Occasionally an isolated BUG_ON(mm->nr_ptes) gets reported, indicating that not all the page tables allocated could be found and freed when exit_mmap() tore down the user address space. There's usually nothing we can say about it, beyond that it's probably a sign of some bad memory or memory corruption; though it might still indicate a bug in vma or page table management (and did recently reveal a race in THP, fixed a few months ago). But one overdue change we can make is from BUG_ON to WARN_ON. It's fairly likely that the system will crash shortly afterwards in some other way (for example, the BUG_ON(page_mapped(page)) in __delete_from_page_cache(), once an inode mapped into the lost page tables gets evicted); but might tell us more before that. Change the BUG_ON(page_mapped) to WARN_ON too? Later perhaps: I'm less eager, since that one has several times led to fixes. Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mmap.c b/mm/mmap.c index e3e86914f11..9adee9fc0d8 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2309,7 +2309,7 @@ void exit_mmap(struct mm_struct *mm) } vm_unacct_memory(nr_accounted); - BUG_ON(mm->nr_ptes > (FIRST_USER_ADDRESS+PMD_SIZE-1)>>PMD_SHIFT); + WARN_ON(mm->nr_ptes > (FIRST_USER_ADDRESS+PMD_SIZE-1)>>PMD_SHIFT); } /* Insert vm structure into process list sorted by address -- cgit v1.2.3-70-g09d2 From d65226e2bfe9dd96f193d61892e20fcda9524d22 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Tue, 21 Aug 2012 16:15:46 -0700 Subject: Documentation: update mount option in filesystem/vfat.txt Update two mount options(discard, nfs) in vfat.txt. Signed-off-by: Namjae Jeon Acked-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/vfat.txt | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index ead764b2728..de1e6c4dccf 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -137,6 +137,17 @@ errors=panic|continue|remount-ro without doing anything or remount the partition in read-only mode (default behavior). +discard -- If set, issues discard/TRIM commands to the block + device when blocks are freed. This is useful for SSD devices + and sparse/thinly-provisoned LUNs. + +nfs -- This option maintains an index (cache) of directory + inodes by i_logstart which is used by the nfs-related code to + improve look-ups. + + Enable this only if you want to export the FAT filesystem + over NFS + : 0,1,yes,no,true,false TODO -- cgit v1.2.3-70-g09d2 From b0cf0b118c90477d1a6811f2cd2307f6a5578362 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Tue, 21 Aug 2012 16:15:49 -0700 Subject: cciss: fix incorrect scsi status reporting Delete code which sets SCSI status incorrectly as it's already been set correctly above this incorrect code. The bug was introduced in 2009 by commit b0e15f6db111 ("cciss: fix typo that causes scsi status to be lost.") Signed-off-by: Stephen M. Cameron Reported-by: Roel van Meer Tested-by: Roel van Meer Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cciss_scsi.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index acda773b372..38aa6dda6b8 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -763,16 +763,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout, { case CMD_TARGET_STATUS: /* Pass it up to the upper layers... */ - if( ei->ScsiStatus) - { -#if 0 - printk(KERN_WARNING "cciss: cmd %p " - "has SCSI Status = %x\n", - c, ei->ScsiStatus); -#endif - cmd->result |= (ei->ScsiStatus << 1); - } - else { /* scsi status is zero??? How??? */ + if (!ei->ScsiStatus) { /* Ordinarily, this case should never happen, but there is a bug in some released firmware revisions that allows it to happen -- cgit v1.2.3-70-g09d2 From eb48c071464757414538c68a6033c8f8c15196f8 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 21 Aug 2012 16:15:52 -0700 Subject: mm: hugetlbfs: correctly populate shared pmd Each page mapped in a process's address space must be correctly accounted for in _mapcount. Normally the rules for this are straightforward but hugetlbfs page table sharing is different. The page table pages at the PMD level are reference counted while the mapcount remains the same. If this accounting is wrong, it causes bugs like this one reported by Larry Woodman: kernel BUG at mm/filemap.c:135! invalid opcode: 0000 [#1] SMP CPU 22 Modules linked in: bridge stp llc sunrpc binfmt_misc dcdbas microcode pcspkr acpi_pad acpi] Pid: 18001, comm: mpitest Tainted: G W 3.3.0+ #4 Dell Inc. PowerEdge R620/07NDJ2 RIP: 0010:[] [] __delete_from_page_cache+0x15d/0x170 Process mpitest (pid: 18001, threadinfo ffff880428972000, task ffff880428b5cc20) Call Trace: delete_from_page_cache+0x40/0x80 truncate_hugepages+0x115/0x1f0 hugetlbfs_evict_inode+0x18/0x30 evict+0x9f/0x1b0 iput_final+0xe3/0x1e0 iput+0x3e/0x50 d_kill+0xf8/0x110 dput+0xe2/0x1b0 __fput+0x162/0x240 During fork(), copy_hugetlb_page_range() detects if huge_pte_alloc() shared page tables with the check dst_pte == src_pte. The logic is if the PMD page is the same, they must be shared. This assumes that the sharing is between the parent and child. However, if the sharing is with a different process entirely then this check fails as in this diagram: parent | ------------>pmd src_pte----------> data page ^ other--------->pmd--------------------| ^ child-----------| dst_pte For this situation to occur, it must be possible for Parent and Other to have faulted and failed to share page tables with each other. This is possible due to the following style of race. PROC A PROC B copy_hugetlb_page_range copy_hugetlb_page_range src_pte == huge_pte_offset src_pte == huge_pte_offset !src_pte so no sharing !src_pte so no sharing (time passes) hugetlb_fault hugetlb_fault huge_pte_alloc huge_pte_alloc huge_pmd_share huge_pmd_share LOCK(i_mmap_mutex) find nothing, no sharing UNLOCK(i_mmap_mutex) LOCK(i_mmap_mutex) find nothing, no sharing UNLOCK(i_mmap_mutex) pmd_alloc pmd_alloc LOCK(instantiation_mutex) fault UNLOCK(instantiation_mutex) LOCK(instantiation_mutex) fault UNLOCK(instantiation_mutex) These two processes are not poing to the same data page but are not sharing page tables because the opportunity was missed. When either process later forks, the src_pte == dst pte is potentially insufficient. As the check falls through, the wrong PTE information is copied in (harmless but wrong) and the mapcount is bumped for a page mapped by a shared page table leading to the BUG_ON. This patch addresses the issue by moving pmd_alloc into huge_pmd_share which guarantees that the shared pud is populated in the same critical section as pmd. This also means that huge_pte_offset test in huge_pmd_share is serialized correctly now which in turn means that the success of the sharing will be higher as the racing tasks see the pud and pmd populated together. Race identified and changelog written mostly by Mel Gorman. {akpm@linux-foundation.org: attempt to make the huge_pmd_share() comment comprehensible, clean up coding style] Reported-by: Larry Woodman Tested-by: Larry Woodman Reviewed-by: Mel Gorman Signed-off-by: Michal Hocko Reviewed-by: Rik van Riel Cc: David Gibson Cc: Ken Chen Cc: Cong Wang Cc: Hillf Danton Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/hugetlbpage.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index f6679a7fb8c..b91e4851242 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -56,9 +56,16 @@ static int vma_shareable(struct vm_area_struct *vma, unsigned long addr) } /* - * search for a shareable pmd page for hugetlb. + * Search for a shareable pmd page for hugetlb. In any case calls pmd_alloc() + * and returns the corresponding pte. While this is not necessary for the + * !shared pmd case because we can allocate the pmd later as well, it makes the + * code much cleaner. pmd allocation is essential for the shared case because + * pud has to be populated inside the same i_mmap_mutex section - otherwise + * racing tasks could either miss the sharing (see huge_pte_offset) or select a + * bad pmd for sharing. */ -static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) +static pte_t * +huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) { struct vm_area_struct *vma = find_vma(mm, addr); struct address_space *mapping = vma->vm_file->f_mapping; @@ -68,9 +75,10 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) struct vm_area_struct *svma; unsigned long saddr; pte_t *spte = NULL; + pte_t *pte; if (!vma_shareable(vma, addr)) - return; + return (pte_t *)pmd_alloc(mm, pud, addr); mutex_lock(&mapping->i_mmap_mutex); vma_prio_tree_foreach(svma, &iter, &mapping->i_mmap, idx, idx) { @@ -97,7 +105,9 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) put_page(virt_to_page(spte)); spin_unlock(&mm->page_table_lock); out: + pte = (pte_t *)pmd_alloc(mm, pud, addr); mutex_unlock(&mapping->i_mmap_mutex); + return pte; } /* @@ -142,8 +152,9 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, } else { BUG_ON(sz != PMD_SIZE); if (pud_none(*pud)) - huge_pmd_share(mm, addr, pud); - pte = (pte_t *) pmd_alloc(mm, pud, addr); + pte = huge_pmd_share(mm, addr, pud); + else + pte = (pte_t *)pmd_alloc(mm, pud, addr); } } BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte)); -- cgit v1.2.3-70-g09d2 From ac8e97f8a742828daa1d9de37f6e635888f8d71e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 21 Aug 2012 16:15:53 -0700 Subject: checkpatch: add control statement test to SINGLE_STATEMENT_DO_WHILE_MACRO Commit b13edf7ff2dd ("checkpatch: add checks for do {} while (0) macro misuses") added a test that is overly simplistic for single statement macros. Macros that start with control tests should be enclosed in a do {} while (0) loop. Add the necessary control tests to the check. Signed-off-by: Joe Perches Acked-by: Andy Whitcroft Tested-by: Franz Schrober Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 913d6bdfdda..ca05ba217f5 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -3016,7 +3016,8 @@ sub process { $herectx .= raw_line($linenr, $n) . "\n"; } - if (($stmts =~ tr/;/;/) == 1) { + if (($stmts =~ tr/;/;/) == 1 && + $stmts !~ /^\s*(if|while|for|switch)\b/) { WARN("SINGLE_STATEMENT_DO_WHILE_MACRO", "Single statement macros should not use a do {} while (0) loop\n" . "$herectx"); } -- cgit v1.2.3-70-g09d2 From d46f3d86fdc9248b4a8497a7da229812a15ba670 Mon Sep 17 00:00:00 2001 From: Zhouping Liu Date: Tue, 21 Aug 2012 16:15:57 -0700 Subject: hugetlb: update hugetlbpage.txt Commit f0f57b2b1488 ("mm: move hugepage test examples to tools/testing/selftests/vm") moved map_hugetlb.c, hugepage-shm.c and hugepage-mmap.c tests into tools/testing/selftests/vm/ directory, but it didn't update hugetlbpage.txt Signed-off-by: Zhouping Liu Acked-by: Dave Young Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/vm/hugetlbpage.txt | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index f8551b3879f..4ac359b7aa1 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -299,11 +299,17 @@ map_hugetlb.c. ******************************************************************* /* - * hugepage-shm: see Documentation/vm/hugepage-shm.c + * map_hugetlb: see tools/testing/selftests/vm/map_hugetlb.c */ ******************************************************************* /* - * hugepage-mmap: see Documentation/vm/hugepage-mmap.c + * hugepage-shm: see tools/testing/selftests/vm/hugepage-shm.c + */ + +******************************************************************* + +/* + * hugepage-mmap: see tools/testing/selftests/vm/hugepage-mmap.c */ -- cgit v1.2.3-70-g09d2 From c3a5ce0416b6c172a23bc8a3760d8704d3d1535b Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 21 Aug 2012 16:16:00 -0700 Subject: string: do not export memweight() to userspace Fix the following warning: usr/include/linux/string.h:8: userspace cannot reference function or variable defined in the kernel Signed-off-by: WANG Cong Acked-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/string.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/string.h b/include/linux/string.h index ffe0442e18d..b9178812d9d 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -144,8 +144,8 @@ static inline bool strstarts(const char *str, const char *prefix) { return strncmp(str, prefix, strlen(prefix)) == 0; } -#endif extern size_t memweight(const void *ptr, size_t bytes); +#endif /* __KERNEL__ */ #endif /* _LINUX_STRING_H_ */ -- cgit v1.2.3-70-g09d2 From 7838f994b4fceff24c343f4e26a6cf4393869579 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Tue, 21 Aug 2012 16:16:02 -0700 Subject: drivers/misc/sgi-xp/xpc_uv.c: SGI XPC fails to load when cpu 0 is out of IRQ resources On many of our larger systems, CPU 0 has had all of its IRQ resources consumed before XPC loads. Worst cases on machines with multiple 10 GigE cards and multiple IB cards have depleted the entire first socket of IRQs. This patch makes selecting the node upon which IRQs are allocated (as well as all the other GRU Message Queue structures) specifiable as a module load param and has a default behavior of searching all nodes/cpus for an available resources. [akpm@linux-foundation.org: fix build: include cpu.h and module.h] Signed-off-by: Robin Holt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc_uv.c | 84 ++++++++++++++++++++++++++++++++++---------- 1 file changed, 65 insertions(+), 19 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 87b251ab6ec..b9e2000969f 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include #include #include @@ -59,6 +61,8 @@ static struct xpc_heartbeat_uv *xpc_heartbeat_uv; XPC_NOTIFY_MSG_SIZE_UV) #define XPC_NOTIFY_IRQ_NAME "xpc_notify" +static int xpc_mq_node = -1; + static struct xpc_gru_mq_uv *xpc_activate_mq_uv; static struct xpc_gru_mq_uv *xpc_notify_mq_uv; @@ -109,11 +113,8 @@ xpc_get_gru_mq_irq_uv(struct xpc_gru_mq_uv *mq, int cpu, char *irq_name) #if defined CONFIG_X86_64 mq->irq = uv_setup_irq(irq_name, cpu, mq->mmr_blade, mq->mmr_offset, UV_AFFINITY_CPU); - if (mq->irq < 0) { - dev_err(xpc_part, "uv_setup_irq() returned error=%d\n", - -mq->irq); + if (mq->irq < 0) return mq->irq; - } mq->mmr_value = uv_read_global_mmr64(mmr_pnode, mq->mmr_offset); @@ -238,8 +239,9 @@ xpc_create_gru_mq_uv(unsigned int mq_size, int cpu, char *irq_name, mq->mmr_blade = uv_cpu_to_blade_id(cpu); nid = cpu_to_node(cpu); - page = alloc_pages_exact_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, - pg_order); + page = alloc_pages_exact_node(nid, + GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, + pg_order); if (page == NULL) { dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d " "bytes of memory on nid=%d for GRU mq\n", mq_size, nid); @@ -1731,9 +1733,50 @@ static struct xpc_arch_operations xpc_arch_ops_uv = { .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv, }; +static int +xpc_init_mq_node(int nid) +{ + int cpu; + + get_online_cpus(); + + for_each_cpu(cpu, cpumask_of_node(nid)) { + xpc_activate_mq_uv = + xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, nid, + XPC_ACTIVATE_IRQ_NAME, + xpc_handle_activate_IRQ_uv); + if (!IS_ERR(xpc_activate_mq_uv)) + break; + } + if (IS_ERR(xpc_activate_mq_uv)) { + put_online_cpus(); + return PTR_ERR(xpc_activate_mq_uv); + } + + for_each_cpu(cpu, cpumask_of_node(nid)) { + xpc_notify_mq_uv = + xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, nid, + XPC_NOTIFY_IRQ_NAME, + xpc_handle_notify_IRQ_uv); + if (!IS_ERR(xpc_notify_mq_uv)) + break; + } + if (IS_ERR(xpc_notify_mq_uv)) { + xpc_destroy_gru_mq_uv(xpc_activate_mq_uv); + put_online_cpus(); + return PTR_ERR(xpc_notify_mq_uv); + } + + put_online_cpus(); + return 0; +} + int xpc_init_uv(void) { + int nid; + int ret = 0; + xpc_arch_ops = xpc_arch_ops_uv; if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) { @@ -1742,21 +1785,21 @@ xpc_init_uv(void) return -E2BIG; } - xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, - XPC_ACTIVATE_IRQ_NAME, - xpc_handle_activate_IRQ_uv); - if (IS_ERR(xpc_activate_mq_uv)) - return PTR_ERR(xpc_activate_mq_uv); + if (xpc_mq_node < 0) + for_each_online_node(nid) { + ret = xpc_init_mq_node(nid); - xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, - XPC_NOTIFY_IRQ_NAME, - xpc_handle_notify_IRQ_uv); - if (IS_ERR(xpc_notify_mq_uv)) { - xpc_destroy_gru_mq_uv(xpc_activate_mq_uv); - return PTR_ERR(xpc_notify_mq_uv); - } + if (!ret) + break; + } + else + ret = xpc_init_mq_node(xpc_mq_node); - return 0; + if (ret < 0) + dev_err(xpc_part, "xpc_init_mq_node() returned error=%d\n", + -ret); + + return ret; } void @@ -1765,3 +1808,6 @@ xpc_exit_uv(void) xpc_destroy_gru_mq_uv(xpc_notify_mq_uv); xpc_destroy_gru_mq_uv(xpc_activate_mq_uv); } + +module_param(xpc_mq_node, int, 0); +MODULE_PARM_DESC(xpc_mq_node, "Node number on which to allocate message queues."); -- cgit v1.2.3-70-g09d2 From c81758fbe0fdbbc0c74b37798f55bd9c91d5c068 Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 21 Aug 2012 16:16:03 -0700 Subject: mm/compaction.c: fix deferring compaction mistake Commit aff622495c9a ("vmscan: only defer compaction for failed order and higher") fixed bad deferring policy but made mistake about checking compact_order_failed in __compact_pgdat(). So it can't update compact_order_failed with the new order. This ends up preventing correct operation of policy deferral. This patch fixes it. Signed-off-by: Minchan Kim Reviewed-by: Rik van Riel Acked-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/compaction.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/compaction.c b/mm/compaction.c index e78cb968842..b6984e234fd 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -861,7 +861,7 @@ static int __compact_pgdat(pg_data_t *pgdat, struct compact_control *cc) if (cc->order > 0) { int ok = zone_watermark_ok(zone, cc->order, low_wmark_pages(zone), 0, 0); - if (ok && cc->order > zone->compact_order_failed) + if (ok && cc->order >= zone->compact_order_failed) zone->compact_order_failed = cc->order + 1; /* Currently async compaction is never deferred. */ else if (!ok && cc->sync) -- cgit v1.2.3-70-g09d2 From 5ed12f12825c6c0451d703bfe918a7fc190e2738 Mon Sep 17 00:00:00 2001 From: Ilya Shchepetkov Date: Tue, 21 Aug 2012 16:16:06 -0700 Subject: drivers/rtc/rtc-pcf2123.c: initialize dynamic sysfs attributes Dynamically allocated sysfs attributes must be initialized using sysfs_attr_init(), otherwise lockdep complains: BUG: key
not in .data! Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Ilya Shchepetkov Cc: Chris Verges Cc: Christian Pellegrin Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf2123.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c index 836118795c0..13e4df63974 100644 --- a/drivers/rtc/rtc-pcf2123.c +++ b/drivers/rtc/rtc-pcf2123.c @@ -43,6 +43,7 @@ #include #include #include +#include #define DRV_VERSION "0.6" @@ -292,6 +293,7 @@ static int __devinit pcf2123_probe(struct spi_device *spi) pdata->rtc = rtc; for (i = 0; i < 16; i++) { + sysfs_attr_init(&pdata->regs[i].attr.attr); sprintf(pdata->regs[i].name, "%1x", i); pdata->regs[i].attr.attr.mode = S_IRUGO | S_IWUSR; pdata->regs[i].attr.attr.name = pdata->regs[i].name; -- cgit v1.2.3-70-g09d2 From b121186ab1b12e2a96a945d88eae0735b4542158 Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Tue, 21 Aug 2012 16:16:08 -0700 Subject: mm: correct page->pfmemalloc to fix deactivate_slab regression Commit cfd19c5a9ecf ("mm: only set page->pfmemalloc when ALLOC_NO_WATERMARKS was used") tried to narrow down page->pfmemalloc setting, but it missed some places the pfmemalloc should be set. So, in __slab_alloc, the unalignment pfmemalloc and ALLOC_NO_WATERMARKS cause incorrect deactivate_slab() on our core2 server: 64.73% fio [kernel.kallsyms] [k] _raw_spin_lock | --- _raw_spin_lock | |---0.34%-- deactivate_slab | __slab_alloc | kmem_cache_alloc | | That causes our fio sync write performance to have a 40% regression. Move the checking in get_page_from_freelist() which resolves this issue. Signed-off-by: Alex Shi Acked-by: Mel Gorman Cc: David Miller Tested-by: Eric Dumazet Tested-by: Sage Weil Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 009ac285fea..07f19248acb 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1928,6 +1928,17 @@ this_zone_full: zlc_active = 0; goto zonelist_scan; } + + if (page) + /* + * page->pfmemalloc is set when ALLOC_NO_WATERMARKS was + * necessary to allocate the page. The expectation is + * that the caller is taking steps that will free more + * memory. The caller should avoid the page being used + * for !PFMEMALLOC purposes. + */ + page->pfmemalloc = !!(alloc_flags & ALLOC_NO_WATERMARKS); + return page; } @@ -2389,14 +2400,6 @@ rebalance: zonelist, high_zoneidx, nodemask, preferred_zone, migratetype); if (page) { - /* - * page->pfmemalloc is set when ALLOC_NO_WATERMARKS was - * necessary to allocate the page. The expectation is - * that the caller is taking steps that will free more - * memory. The caller should avoid the page being used - * for !PFMEMALLOC purposes. - */ - page->pfmemalloc = true; goto got_pg; } } @@ -2569,8 +2572,6 @@ retry_cpuset: page = __alloc_pages_slowpath(gfp_mask, order, zonelist, high_zoneidx, nodemask, preferred_zone, migratetype); - else - page->pfmemalloc = false; trace_mm_page_alloc(page, order, gfp_mask, migratetype); -- cgit v1.2.3-70-g09d2 From 7dbfb315b2aaef0a115765946bf3026d074c33a7 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 21 Aug 2012 16:16:10 -0700 Subject: drivers/rtc/rtc-rs5c348.c: fix hour decoding in 12-hour mode Correct the offset by subtracting 20 from tm_hour before taking the modulo 12. [ "Why 20?" I hear you ask. Or at least I did. Here's the reason why: RS5C348_BIT_PM is 32, and is - stupidly - included in the RS5C348_HOURS_MASK define. So it's really subtracting out that bit to get "hour+12". But then because it does things modulo 12, it needs to add the 12 in again afterwards anyway. This code is confused. It would be much clearer if RS5C348_HOURS_MASK just didn't include the RS5C348_BIT_PM bit at all, then it wouldn't need to do the silly subtract either. Whatever. It's all just math, the end result is the same. - Linus ] Reported-by: James Nute Tested-by: James Nute Signed-off-by: Atsushi Nemoto Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-rs5c348.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-rs5c348.c b/drivers/rtc/rtc-rs5c348.c index 77074ccd285..fd5c7af04ae 100644 --- a/drivers/rtc/rtc-rs5c348.c +++ b/drivers/rtc/rtc-rs5c348.c @@ -122,9 +122,12 @@ rs5c348_rtc_read_time(struct device *dev, struct rtc_time *tm) tm->tm_min = bcd2bin(rxbuf[RS5C348_REG_MINS] & RS5C348_MINS_MASK); tm->tm_hour = bcd2bin(rxbuf[RS5C348_REG_HOURS] & RS5C348_HOURS_MASK); if (!pdata->rtc_24h) { - tm->tm_hour %= 12; - if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) + if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) { + tm->tm_hour -= 20; + tm->tm_hour %= 12; tm->tm_hour += 12; + } else + tm->tm_hour %= 12; } tm->tm_wday = bcd2bin(rxbuf[RS5C348_REG_WDAY] & RS5C348_WDAY_MASK); tm->tm_mday = bcd2bin(rxbuf[RS5C348_REG_DAY] & RS5C348_DAY_MASK); -- cgit v1.2.3-70-g09d2 From 3670e7e12e582c6d67761275d148171feb7a9004 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Tue, 21 Aug 2012 16:16:11 -0700 Subject: rapidio/tsi721: fix inbound doorbell interrupt handling Make sure that there is no doorbell messages left behind due to disabled interrupts during inbound doorbell processing. The most common case for this bug is loss of rionet JOIN messages in systems with three or more rionet participants and MSI or MSI-X enabled. As result, requests for packet transfers may finish with "destination unreachable" error message. This patch is applicable to kernel versions starting from v3.2. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 722246cf20a..c0d6a049cbd 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -435,6 +435,9 @@ static void tsi721_db_dpc(struct work_struct *work) " info %4.4x\n", DBELL_SID(idb.bytes), DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); } + + wr_ptr = ioread32(priv->regs + + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; } iowrite32(rd_ptr & (IDB_QSIZE - 1), @@ -445,6 +448,10 @@ static void tsi721_db_dpc(struct work_struct *work) regval |= TSI721_SR_CHINT_IDBQRCV; iowrite32(regval, priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + + wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; + if (wr_ptr != rd_ptr) + schedule_work(&priv->idb_work); } /** -- cgit v1.2.3-70-g09d2 From 9a9a9a7adafe62a34de8b4fb48936c1c5f9bafa5 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Tue, 21 Aug 2012 16:16:12 -0700 Subject: rapidio/tsi721: fix unused variable compiler warning Fix unused variable compiler warning when built with CONFIG_RAPIDIO_DEBUG option off. This patch is applicable to kernel versions starting from v3.2 Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index c0d6a049cbd..5d44252b734 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -2219,7 +2219,7 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct tsi721_device *priv; - int i, cap; + int cap; int err; u32 regval; @@ -2239,12 +2239,15 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, priv->pdev = pdev; #ifdef DEBUG + { + int i; for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n", i, (unsigned long long)pci_resource_start(pdev, i), (unsigned long)pci_resource_len(pdev, i), pci_resource_flags(pdev, i)); } + } #endif /* * Verify BAR configuration -- cgit v1.2.3-70-g09d2 From de74f1cc3b1e9730d9b58580cd11361d30cd182d Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 21 Aug 2012 16:16:15 -0700 Subject: mm: have order > 0 compaction start near a pageblock with free pages Commit 7db8889ab05b ("mm: have order > 0 compaction start off where it left") introduced a caching mechanism to reduce the amount work the free page scanner does in compaction. However, it has a problem. Consider two process simultaneously scanning free pages C Process A M S F |---------------------------------------| Process B M FS C is zone->compact_cached_free_pfn S is cc->start_pfree_pfn M is cc->migrate_pfn F is cc->free_pfn In this diagram, Process A has just reached its migrate scanner, wrapped around and updated compact_cached_free_pfn accordingly. Simultaneously, Process B finishes isolating in a block and updates compact_cached_free_pfn again to the location of its free scanner. Process A moves to "end_of_zone - one_pageblock" and runs this check if (cc->order > 0 && (!cc->wrapped || zone->compact_cached_free_pfn > cc->start_free_pfn)) pfn = min(pfn, zone->compact_cached_free_pfn); compact_cached_free_pfn is above where it started so the free scanner skips almost the entire space it should have scanned. When there are multiple processes compacting it can end in a situation where the entire zone is not being scanned at all. Further, it is possible for two processes to ping-pong update to compact_cached_free_pfn which is just random. Overall, the end result wrecks allocation success rates. There is not an obvious way around this problem without introducing new locking and state so this patch takes a different approach. First, it gets rid of the skip logic because it's not clear that it matters if two free scanners happen to be in the same block but with racing updates it's too easy for it to skip over blocks it should not. Second, it updates compact_cached_free_pfn in a more limited set of circumstances. If a scanner has wrapped, it updates compact_cached_free_pfn to the end of the zone. When a wrapped scanner isolates a page, it updates compact_cached_free_pfn to point to the highest pageblock it can isolate pages from. If a scanner has not wrapped when it has finished isolated pages it checks if compact_cached_free_pfn is pointing to the end of the zone. If so, the value is updated to point to the highest pageblock that pages were isolated from. This value will not be updated again until a free page scanner wraps and resets compact_cached_free_pfn. This is not optimal and it can still race but the compact_cached_free_pfn will be pointing to or very near a pageblock with free pages. Signed-off-by: Mel Gorman Reviewed-by: Rik van Riel Reviewed-by: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/compaction.c | 54 ++++++++++++++++++++++++++++-------------------------- 1 file changed, 28 insertions(+), 26 deletions(-) diff --git a/mm/compaction.c b/mm/compaction.c index b6984e234fd..bcce7897e17 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -383,6 +383,20 @@ static bool suitable_migration_target(struct page *page) return false; } +/* + * Returns the start pfn of the last page block in a zone. This is the starting + * point for full compaction of a zone. Compaction searches for free pages from + * the end of each zone, while isolate_freepages_block scans forward inside each + * page block. + */ +static unsigned long start_free_pfn(struct zone *zone) +{ + unsigned long free_pfn; + free_pfn = zone->zone_start_pfn + zone->spanned_pages; + free_pfn &= ~(pageblock_nr_pages-1); + return free_pfn; +} + /* * Based on information in the current compact_control, find blocks * suitable for isolating free pages from and then isolate them. @@ -422,17 +436,6 @@ static void isolate_freepages(struct zone *zone, pfn -= pageblock_nr_pages) { unsigned long isolated; - /* - * Skip ahead if another thread is compacting in the area - * simultaneously. If we wrapped around, we can only skip - * ahead if zone->compact_cached_free_pfn also wrapped to - * above our starting point. - */ - if (cc->order > 0 && (!cc->wrapped || - zone->compact_cached_free_pfn > - cc->start_free_pfn)) - pfn = min(pfn, zone->compact_cached_free_pfn); - if (!pfn_valid(pfn)) continue; @@ -474,7 +477,15 @@ static void isolate_freepages(struct zone *zone, */ if (isolated) { high_pfn = max(high_pfn, pfn); - if (cc->order > 0) + + /* + * If the free scanner has wrapped, update + * compact_cached_free_pfn to point to the highest + * pageblock with free pages. This reduces excessive + * scanning of full pageblocks near the end of the + * zone + */ + if (cc->order > 0 && cc->wrapped) zone->compact_cached_free_pfn = high_pfn; } } @@ -484,6 +495,11 @@ static void isolate_freepages(struct zone *zone, cc->free_pfn = high_pfn; cc->nr_freepages = nr_freepages; + + /* If compact_cached_free_pfn is reset then set it now */ + if (cc->order > 0 && !cc->wrapped && + zone->compact_cached_free_pfn == start_free_pfn(zone)) + zone->compact_cached_free_pfn = high_pfn; } /* @@ -570,20 +586,6 @@ static isolate_migrate_t isolate_migratepages(struct zone *zone, return ISOLATE_SUCCESS; } -/* - * Returns the start pfn of the last page block in a zone. This is the starting - * point for full compaction of a zone. Compaction searches for free pages from - * the end of each zone, while isolate_freepages_block scans forward inside each - * page block. - */ -static unsigned long start_free_pfn(struct zone *zone) -{ - unsigned long free_pfn; - free_pfn = zone->zone_start_pfn + zone->spanned_pages; - free_pfn &= ~(pageblock_nr_pages-1); - return free_pfn; -} - static int compact_finished(struct zone *zone, struct compact_control *cc) { -- cgit v1.2.3-70-g09d2 From c67fe3752abe6ab47639e2f9b836900c3dc3da84 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 21 Aug 2012 16:16:17 -0700 Subject: mm: compaction: Abort async compaction if locks are contended or taking too long Jim Schutt reported a problem that pointed at compaction contending heavily on locks. The workload is straight-forward and in his own words; The systems in question have 24 SAS drives spread across 3 HBAs, running 24 Ceph OSD instances, one per drive. FWIW these servers are dual-socket Intel 5675 Xeons w/48 GB memory. I've got ~160 Ceph Linux clients doing dd simultaneously to a Ceph file system backed by 12 of these servers. Early in the test everything looks fine procs -------------------memory------------------ ---swap-- -----io---- --system-- -----cpu------- r b swpd free buff cache si so bi bo in cs us sy id wa st 31 15 0 287216 576 38606628 0 0 2 1158 2 14 1 3 95 0 0 27 15 0 225288 576 38583384 0 0 18 2222016 203357 134876 11 56 17 15 0 28 17 0 219256 576 38544736 0 0 11 2305932 203141 146296 11 49 23 17 0 6 18 0 215596 576 38552872 0 0 7 2363207 215264 166502 12 45 22 20 0 22 18 0 226984 576 38596404 0 0 3 2445741 223114 179527 12 43 23 22 0 and then it goes to pot procs -------------------memory------------------ ---swap-- -----io---- --system-- -----cpu------- r b swpd free buff cache si so bi bo in cs us sy id wa st 163 8 0 464308 576 36791368 0 0 11 22210 866 536 3 13 79 4 0 207 14 0 917752 576 36181928 0 0 712 1345376 134598 47367 7 90 1 2 0 123 12 0 685516 576 36296148 0 0 429 1386615 158494 60077 8 84 5 3 0 123 12 0 598572 576 36333728 0 0 1107 1233281 147542 62351 7 84 5 4 0 622 7 0 660768 576 36118264 0 0 557 1345548 151394 59353 7 85 4 3 0 223 11 0 283960 576 36463868 0 0 46 1107160 121846 33006 6 93 1 1 0 Note that system CPU usage is very high blocks being written out has dropped by 42%. He analysed this with perf and found perf record -g -a sleep 10 perf report --sort symbol --call-graph fractal,5 34.63% [k] _raw_spin_lock_irqsave | |--97.30%-- isolate_freepages | compaction_alloc | unmap_and_move | migrate_pages | compact_zone | compact_zone_order | try_to_compact_pages | __alloc_pages_direct_compact | __alloc_pages_slowpath | __alloc_pages_nodemask | alloc_pages_vma | do_huge_pmd_anonymous_page | handle_mm_fault | do_page_fault | page_fault | | | |--87.39%-- skb_copy_datagram_iovec | | tcp_recvmsg | | inet_recvmsg | | sock_recvmsg | | sys_recvfrom | | system_call | | __recv | | | | | --100.00%-- (nil) | | | --12.61%-- memcpy --2.70%-- [...] There was other data but primarily it is all showing that compaction is contended heavily on the zone->lock and zone->lru_lock. commit [b2eef8c0: mm: compaction: minimise the time IRQs are disabled while isolating pages for migration] noted that it was possible for migration to hold the lru_lock for an excessive amount of time. Very broadly speaking this patch expands the concept. This patch introduces compact_checklock_irqsave() to check if a lock is contended or the process needs to be scheduled. If either condition is true then async compaction is aborted and the caller is informed. The page allocator will fail a THP allocation if compaction failed due to contention. This patch also introduces compact_trylock_irqsave() which will acquire the lock only if it is not contended and the process does not need to schedule. Reported-by: Jim Schutt Tested-by: Jim Schutt Signed-off-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/compaction.h | 4 +- mm/compaction.c | 100 +++++++++++++++++++++++++++++++++++---------- mm/internal.h | 1 + mm/page_alloc.c | 17 +++++--- 4 files changed, 93 insertions(+), 29 deletions(-) diff --git a/include/linux/compaction.h b/include/linux/compaction.h index 133ddcf8339..ef658147e4e 100644 --- a/include/linux/compaction.h +++ b/include/linux/compaction.h @@ -22,7 +22,7 @@ extern int sysctl_extfrag_handler(struct ctl_table *table, int write, extern int fragmentation_index(struct zone *zone, unsigned int order); extern unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *mask, - bool sync); + bool sync, bool *contended); extern int compact_pgdat(pg_data_t *pgdat, int order); extern unsigned long compaction_suitable(struct zone *zone, int order); @@ -64,7 +64,7 @@ static inline bool compaction_deferred(struct zone *zone, int order) #else static inline unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *nodemask, - bool sync) + bool sync, bool *contended) { return COMPACT_CONTINUE; } diff --git a/mm/compaction.c b/mm/compaction.c index bcce7897e17..7fcd3a52e68 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -50,6 +50,47 @@ static inline bool migrate_async_suitable(int migratetype) return is_migrate_cma(migratetype) || migratetype == MIGRATE_MOVABLE; } +/* + * Compaction requires the taking of some coarse locks that are potentially + * very heavily contended. Check if the process needs to be scheduled or + * if the lock is contended. For async compaction, back out in the event + * if contention is severe. For sync compaction, schedule. + * + * Returns true if the lock is held. + * Returns false if the lock is released and compaction should abort + */ +static bool compact_checklock_irqsave(spinlock_t *lock, unsigned long *flags, + bool locked, struct compact_control *cc) +{ + if (need_resched() || spin_is_contended(lock)) { + if (locked) { + spin_unlock_irqrestore(lock, *flags); + locked = false; + } + + /* async aborts if taking too long or contended */ + if (!cc->sync) { + if (cc->contended) + *cc->contended = true; + return false; + } + + cond_resched(); + if (fatal_signal_pending(current)) + return false; + } + + if (!locked) + spin_lock_irqsave(lock, *flags); + return true; +} + +static inline bool compact_trylock_irqsave(spinlock_t *lock, + unsigned long *flags, struct compact_control *cc) +{ + return compact_checklock_irqsave(lock, flags, false, cc); +} + /* * Isolate free pages onto a private freelist. Caller must hold zone->lock. * If @strict is true, will abort returning 0 on any invalid PFNs or non-free @@ -173,7 +214,7 @@ isolate_freepages_range(unsigned long start_pfn, unsigned long end_pfn) } /* Update the number of anon and file isolated pages in the zone */ -static void acct_isolated(struct zone *zone, struct compact_control *cc) +static void acct_isolated(struct zone *zone, bool locked, struct compact_control *cc) { struct page *page; unsigned int count[2] = { 0, }; @@ -181,8 +222,14 @@ static void acct_isolated(struct zone *zone, struct compact_control *cc) list_for_each_entry(page, &cc->migratepages, lru) count[!!page_is_file_cache(page)]++; - __mod_zone_page_state(zone, NR_ISOLATED_ANON, count[0]); - __mod_zone_page_state(zone, NR_ISOLATED_FILE, count[1]); + /* If locked we can use the interrupt unsafe versions */ + if (locked) { + __mod_zone_page_state(zone, NR_ISOLATED_ANON, count[0]); + __mod_zone_page_state(zone, NR_ISOLATED_FILE, count[1]); + } else { + mod_zone_page_state(zone, NR_ISOLATED_ANON, count[0]); + mod_zone_page_state(zone, NR_ISOLATED_FILE, count[1]); + } } /* Similar to reclaim, but different enough that they don't share logic */ @@ -228,6 +275,8 @@ isolate_migratepages_range(struct zone *zone, struct compact_control *cc, struct list_head *migratelist = &cc->migratepages; isolate_mode_t mode = 0; struct lruvec *lruvec; + unsigned long flags; + bool locked; /* * Ensure that there are not too many pages isolated from the LRU @@ -247,25 +296,22 @@ isolate_migratepages_range(struct zone *zone, struct compact_control *cc, /* Time to isolate some pages for migration */ cond_resched(); - spin_lock_irq(&zone->lru_lock); + spin_lock_irqsave(&zone->lru_lock, flags); + locked = true; for (; low_pfn < end_pfn; low_pfn++) { struct page *page; - bool locked = true; /* give a chance to irqs before checking need_resched() */ if (!((low_pfn+1) % SWAP_CLUSTER_MAX)) { - spin_unlock_irq(&zone->lru_lock); + spin_unlock_irqrestore(&zone->lru_lock, flags); locked = false; } - if (need_resched() || spin_is_contended(&zone->lru_lock)) { - if (locked) - spin_unlock_irq(&zone->lru_lock); - cond_resched(); - spin_lock_irq(&zone->lru_lock); - if (fatal_signal_pending(current)) - break; - } else if (!locked) - spin_lock_irq(&zone->lru_lock); + + /* Check if it is ok to still hold the lock */ + locked = compact_checklock_irqsave(&zone->lru_lock, &flags, + locked, cc); + if (!locked) + break; /* * migrate_pfn does not necessarily start aligned to a @@ -349,9 +395,10 @@ isolate_migratepages_range(struct zone *zone, struct compact_control *cc, } } - acct_isolated(zone, cc); + acct_isolated(zone, locked, cc); - spin_unlock_irq(&zone->lru_lock); + if (locked) + spin_unlock_irqrestore(&zone->lru_lock, flags); trace_mm_compaction_isolate_migratepages(nr_scanned, nr_isolated); @@ -461,7 +508,16 @@ static void isolate_freepages(struct zone *zone, * are disabled */ isolated = 0; - spin_lock_irqsave(&zone->lock, flags); + + /* + * The zone lock must be held to isolate freepages. This + * unfortunately this is a very coarse lock and can be + * heavily contended if there are parallel allocations + * or parallel compactions. For async compaction do not + * spin on the lock + */ + if (!compact_trylock_irqsave(&zone->lock, &flags, cc)) + break; if (suitable_migration_target(page)) { end_pfn = min(pfn + pageblock_nr_pages, zone_end_pfn); isolated = isolate_freepages_block(pfn, end_pfn, @@ -773,7 +829,7 @@ out: static unsigned long compact_zone_order(struct zone *zone, int order, gfp_t gfp_mask, - bool sync) + bool sync, bool *contended) { struct compact_control cc = { .nr_freepages = 0, @@ -782,6 +838,7 @@ static unsigned long compact_zone_order(struct zone *zone, .migratetype = allocflags_to_migratetype(gfp_mask), .zone = zone, .sync = sync, + .contended = contended, }; INIT_LIST_HEAD(&cc.freepages); INIT_LIST_HEAD(&cc.migratepages); @@ -803,7 +860,7 @@ int sysctl_extfrag_threshold = 500; */ unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *nodemask, - bool sync) + bool sync, bool *contended) { enum zone_type high_zoneidx = gfp_zone(gfp_mask); int may_enter_fs = gfp_mask & __GFP_FS; @@ -827,7 +884,8 @@ unsigned long try_to_compact_pages(struct zonelist *zonelist, nodemask) { int status; - status = compact_zone_order(zone, order, gfp_mask, sync); + status = compact_zone_order(zone, order, gfp_mask, sync, + contended); rc = max(status, rc); /* If a normal allocation would succeed, stop compacting */ diff --git a/mm/internal.h b/mm/internal.h index 3314f79d775..b8c91b342e2 100644 --- a/mm/internal.h +++ b/mm/internal.h @@ -130,6 +130,7 @@ struct compact_control { int order; /* order a direct compactor needs */ int migratetype; /* MOVABLE, RECLAIMABLE etc */ struct zone *zone; + bool *contended; /* True if a lock was contended */ }; unsigned long diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 07f19248acb..c66fb875104 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2102,7 +2102,7 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, struct zonelist *zonelist, enum zone_type high_zoneidx, nodemask_t *nodemask, int alloc_flags, struct zone *preferred_zone, int migratetype, bool sync_migration, - bool *deferred_compaction, + bool *contended_compaction, bool *deferred_compaction, unsigned long *did_some_progress) { struct page *page; @@ -2117,7 +2117,8 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, current->flags |= PF_MEMALLOC; *did_some_progress = try_to_compact_pages(zonelist, order, gfp_mask, - nodemask, sync_migration); + nodemask, sync_migration, + contended_compaction); current->flags &= ~PF_MEMALLOC; if (*did_some_progress != COMPACT_SKIPPED) { @@ -2163,7 +2164,7 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, struct zonelist *zonelist, enum zone_type high_zoneidx, nodemask_t *nodemask, int alloc_flags, struct zone *preferred_zone, int migratetype, bool sync_migration, - bool *deferred_compaction, + bool *contended_compaction, bool *deferred_compaction, unsigned long *did_some_progress) { return NULL; @@ -2336,6 +2337,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, unsigned long did_some_progress; bool sync_migration = false; bool deferred_compaction = false; + bool contended_compaction = false; /* * In the slowpath, we sanity check order to avoid ever trying to @@ -2425,6 +2427,7 @@ rebalance: nodemask, alloc_flags, preferred_zone, migratetype, sync_migration, + &contended_compaction, &deferred_compaction, &did_some_progress); if (page) @@ -2434,10 +2437,11 @@ rebalance: /* * If compaction is deferred for high-order allocations, it is because * sync compaction recently failed. In this is the case and the caller - * has requested the system not be heavily disrupted, fail the - * allocation now instead of entering direct reclaim + * requested a movable allocation that does not heavily disrupt the + * system then fail the allocation instead of entering direct reclaim. */ - if (deferred_compaction && (gfp_mask & __GFP_NO_KSWAPD)) + if ((deferred_compaction || contended_compaction) && + (gfp_mask & __GFP_NO_KSWAPD)) goto nopage; /* Try direct reclaim and then allocating */ @@ -2508,6 +2512,7 @@ rebalance: nodemask, alloc_flags, preferred_zone, migratetype, sync_migration, + &contended_compaction, &deferred_compaction, &did_some_progress); if (page) -- cgit v1.2.3-70-g09d2 From d8636a2717bb3da2a7ce2154bf08de90bb8c87b0 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 21 Aug 2012 16:29:47 +1000 Subject: fbcon: fix race condition between console lock and cursor timer (v1.1) So we've had a fair few reports of fbcon handover breakage between efi/vesafb and i915 surface recently, so I dedicated a couple of days to finding the problem. Essentially the last thing we saw was the conflicting framebuffer message and that was all. So after much tracing with direct netconsole writes (printks under console_lock not so useful), I think I found the race. Thread A (driver load) Thread B (timer thread) unbind_con_driver -> | bind_con_driver -> | vc->vc_sw->con_deinit -> | fbcon_deinit -> | console_lock() | | | | fbcon_flashcursor timer fires | console_lock() <- blocked for A | | fbcon_del_cursor_timer -> del_timer_sync (BOOM) Of course because all of this is under the console lock, we never see anything, also since we also just unbound the active console guess what we never see anything. Hopefully this fixes the problem for anyone seeing vesafb->kms driver handoff. v1.1: add comment suggestion from Alan. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/video/console/fbcon.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 2e471c22abf..88e92041d8f 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -372,8 +372,15 @@ static void fb_flashcursor(struct work_struct *work) struct vc_data *vc = NULL; int c; int mode; + int ret; + + /* FIXME: we should sort out the unbind locking instead */ + /* instead we just fail to flash the cursor if we can't get + * the lock instead of blocking fbcon deinit */ + ret = console_trylock(); + if (ret == 0) + return; - console_lock(); if (ops && ops->currcon != -1) vc = vc_cons[ops->currcon].d; -- cgit v1.2.3-70-g09d2 From 83be4ffa1acbcd529b771f4d2e639b15e2b7957e Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Tue, 14 Aug 2012 14:47:37 -0700 Subject: x86/spinlocks: Fix comment in spinlock.h This comment is no longer true. We support up to 2^16 CPUs because __ticket_t is an u16 if NR_CPUS is larger than 256. Signed-off-by: Richard Weinberger Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/x86/include/asm/spinlock.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index b315a33867f..33692eaabab 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -12,8 +12,7 @@ * Simple spin lock operations. There are two variants, one clears IRQ's * on the local processor, one does not. * - * These are fair FIFO ticket locks, which are currently limited to 256 - * CPUs. + * These are fair FIFO ticket locks, which support up to 2^16 CPUs. * * (the type definitions are in asm/spinlock_types.h) */ -- cgit v1.2.3-70-g09d2 From 2530cd4f448935c74eeb49f29559589928e4b2f0 Mon Sep 17 00:00:00 2001 From: "Liu, Chuansheng" Date: Tue, 14 Aug 2012 06:55:01 +0000 Subject: x86/fixup_irq: Use cpu_online_mask instead of cpu_all_mask When one CPU is going down and this CPU is the last one in irq affinity, current code is setting cpu_all_mask as the new affinity for that irq. But for some systems (such as in Medfield Android mobile) the firmware sends the interrupt to each CPU in the irq affinity mask, averaged, and cpu_all_mask includes all potential CPUs, i.e. offline ones as well. So replace cpu_all_mask with cpu_online_mask. Signed-off-by: liu chuansheng Acked-by: Yanmin Zhang Acked-by: Thomas Gleixner Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A137286@SHSMSX101.ccr.corp.intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 7ad683d7864..d44f7829968 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -270,7 +270,7 @@ void fixup_irqs(void) if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { break_affinity = 1; - affinity = cpu_all_mask; + affinity = cpu_online_mask; } chip = irq_data_get_irq_chip(data); -- cgit v1.2.3-70-g09d2 From 784ffcbb96c3a97b4c64fd48b1dfe12ef3fcbcda Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 21 Aug 2012 20:30:46 -0400 Subject: time: Ensure we normalize the timekeeper in tk_xtime_add Andreas noticed problems with resume on specific hardware after commit 1e75fa8b (time: Condense timekeeper.xtime into xtime_sec) combined with commit b44d50dca (time: Fix casting issue in tk_set_xtime and tk_xtime_add) After some digging I realized we aren't normalizing the timekeeper after the add. Add the missing normalize call. Reported-by: Andreas Schwab Tested-by: Andreas Schwab Signed-off-by: John Stultz Cc: Prarit Bhargava Cc: Ingo Molnar Link: http://lkml.kernel.org/r/1345595449-34965-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- kernel/time/timekeeping.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 898bef066a4..258164ae45c 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -115,6 +115,7 @@ static void tk_xtime_add(struct timekeeper *tk, const struct timespec *ts) { tk->xtime_sec += ts->tv_sec; tk->xtime_nsec += (u64)ts->tv_nsec << tk->shift; + tk_normalize_xtime(tk); } static void tk_set_wall_to_mono(struct timekeeper *tk, struct timespec wtm) -- cgit v1.2.3-70-g09d2 From 85dc8f05c93c8105987de9d7e7cebf15a72ff4ec Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Tue, 21 Aug 2012 20:30:47 -0400 Subject: time: Fix casting issue in timekeeping_forward_now arch_gettimeoffset returns a u32 value which when shifted by tk->shift can overflow. This issue was introduced with 1e75fa8be (time: Condense timekeeper.xtime into xtime_sec) Cast it to u64 first. Signed-off-by: Andreas Schwab Signed-off-by: John Stultz Cc: Prarit Bhargava Cc: Ingo Molnar Link: http://lkml.kernel.org/r/1345595449-34965-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- kernel/time/timekeeping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 258164ae45c..1dbf80ec769 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -277,7 +277,7 @@ static void timekeeping_forward_now(struct timekeeper *tk) tk->xtime_nsec += cycle_delta * tk->mult; /* If arch requires, add in gettimeoffset() */ - tk->xtime_nsec += arch_gettimeoffset() << tk->shift; + tk->xtime_nsec += (u64)arch_gettimeoffset() << tk->shift; tk_normalize_xtime(tk); -- cgit v1.2.3-70-g09d2 From 6ea565a9be32a3c8d1092017686f183b6d8c4514 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 21 Aug 2012 20:30:48 -0400 Subject: time: Avoid potential shift overflow with large shift values Andreas Schwab noticed that the 1 << tk->shift could overflow if the shift value was greater than 30, since 1 would be a 32bit long on 32bit architectures. This issue was introduced by 1e75fa8be (time: Condense timekeeper.xtime into xtime_sec) Use 1ULL instead to ensure we don't overflow on the shift. Reported-by: Andreas Schwab Signed-off-by: John Stultz Cc: Prarit Bhargava Cc: Ingo Molnar Link: http://lkml.kernel.org/r/1345595449-34965-4-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- kernel/time/timekeeping.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 1dbf80ec769..a5a9389c4c3 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -1184,9 +1184,9 @@ static void update_wall_time(void) * the vsyscall implementations are converted to use xtime_nsec * (shifted nanoseconds), this can be killed. */ - remainder = tk->xtime_nsec & ((1 << tk->shift) - 1); + remainder = tk->xtime_nsec & ((1ULL << tk->shift) - 1); tk->xtime_nsec -= remainder; - tk->xtime_nsec += 1 << tk->shift; + tk->xtime_nsec += 1ULL << tk->shift; tk->ntp_error += remainder << tk->ntp_error_shift; /* -- cgit v1.2.3-70-g09d2 From bf2ac312195155511a0f79325515cbb61929898a Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 21 Aug 2012 20:30:49 -0400 Subject: time: Avoid making adjustments if we haven't accumulated anything If update_wall_time() is called and the current offset isn't large enough to accumulate, avoid re-calling timekeeping_adjust which may change the clock freq and can cause 1ns inconsistencies with CLOCK_REALTIME_COARSE/CLOCK_MONOTONIC_COARSE. Signed-off-by: John Stultz Cc: Prarit Bhargava Cc: Ingo Molnar Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1345595449-34965-5-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- kernel/time/timekeeping.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index a5a9389c4c3..0c1485e42be 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -1152,6 +1152,10 @@ static void update_wall_time(void) offset = (clock->read(clock) - clock->cycle_last) & clock->mask; #endif + /* Check if there's really nothing to do */ + if (offset < tk->cycle_interval) + goto out; + /* * With NO_HZ we may have to accumulate many cycle_intervals * (think "ticks") worth of time at once. To do this efficiently, -- cgit v1.2.3-70-g09d2 From 65b455b123c7e2b835a0b7148f9bae584f95000e Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 21 Aug 2012 21:50:58 +0300 Subject: UBIFS: fix complaints about too small debug buffer size When debugging is enabled, we use a temporary on-stack buffer for formatting the key strings like "(11368871, direntry, 0xcd0750)". The buffer size is 32 bytes and sometimes it is not enough to fit the key string - e.g., when inode numbers are high. This is not fatal, but the key strings are incomplete and UBIFS complains like this: UBIFS assert failed in dbg_snprintf_key at 137 (pid 1) This is a regression caused by "515315a UBIFS: fix key printing". Fix the issue by increasing the buffer to 48 bytes. Reported-by: Michael Hench Signed-off-by: Artem Bityutskiy Tested-by: Michael Hench Cc: stable@vger.kernel.org [v3.3+] --- fs/ubifs/debug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h index 8b8cc4e945f..760de723dad 100644 --- a/fs/ubifs/debug.h +++ b/fs/ubifs/debug.h @@ -167,7 +167,7 @@ struct ubifs_global_debug_info { #define ubifs_dbg_msg(type, fmt, ...) \ pr_debug("UBIFS DBG " type ": " fmt "\n", ##__VA_ARGS__) -#define DBG_KEY_BUF_LEN 32 +#define DBG_KEY_BUF_LEN 48 #define ubifs_dbg_msg_key(type, key, fmt, ...) do { \ char __tmp_key_buf[DBG_KEY_BUF_LEN]; \ pr_debug("UBIFS DBG " type ": " fmt "%s\n", ##__VA_ARGS__, \ -- cgit v1.2.3-70-g09d2 From cb09cad44f07044d9810f18f6f9a6a6f3771f979 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Wed, 22 Aug 2012 13:03:48 +0300 Subject: x86/alternatives: Fix p6 nops on non-modular kernels Probably a leftover from the early days of self-patching, p6nops are marked __initconst_or_module, which causes them to be discarded in a non-modular kernel. If something later triggers patching, it will overwrite kernel code with garbage. Reported-by: Tomas Racek Signed-off-by: Avi Kivity Cc: Michael Tokarev Cc: Borislav Petkov Cc: Marcelo Tosatti Cc: qemu-devel@nongnu.org Cc: Anthony Liguori Cc: H. Peter Anvin Cc: Alan Cox Cc: Alan Cox Link: http://lkml.kernel.org/r/5034AE84.90708@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/alternative.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index afb7ff79a29..ced4534baed 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -165,7 +165,7 @@ static const unsigned char * const k7_nops[ASM_NOP_MAX+2] = #endif #ifdef P6_NOP1 -static const unsigned char __initconst_or_module p6nops[] = +static const unsigned char p6nops[] = { P6_NOP1, P6_NOP2, -- cgit v1.2.3-70-g09d2 From 35f2d16bb9ace0fb2671b8232839944ad9057c6f Mon Sep 17 00:00:00 2001 From: Takuya Yoshikawa Date: Mon, 20 Aug 2012 18:35:39 +0900 Subject: KVM: MMU: Fix mmu_shrink() so that it can free mmu pages as intended Although the possible race described in commit 85b7059169e128c57a3a8a3e588fb89cb2031da1 KVM: MMU: fix shrinking page from the empty mmu was correct, the real cause of that issue was a more trivial bug of mmu_shrink() introduced by commit 1952639665e92481c34c34c3e2a71bf3e66ba362 KVM: MMU: do not iterate over all VMs in mmu_shrink() Here is the bug: if (kvm->arch.n_used_mmu_pages > 0) { if (!nr_to_scan--) break; continue; } We skip VMs whose n_used_mmu_pages is not zero and try to shrink others: in other words we try to shrink empty ones by mistake. This patch reverses the logic so that mmu_shrink() can free pages from the first VM whose n_used_mmu_pages is not zero. Note that we also add comments explaining the role of nr_to_scan which is not practically important now, hoping this will be improved in the future. Signed-off-by: Takuya Yoshikawa Cc: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 01ca0042393..7fbd0d273ea 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -4112,17 +4112,22 @@ static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc) int idx; LIST_HEAD(invalid_list); + /* + * Never scan more than sc->nr_to_scan VM instances. + * Will not hit this condition practically since we do not try + * to shrink more than one VM and it is very unlikely to see + * !n_used_mmu_pages so many times. + */ + if (!nr_to_scan--) + break; /* * n_used_mmu_pages is accessed without holding kvm->mmu_lock * here. We may skip a VM instance errorneosly, but we do not * want to shrink a VM that only started to populate its MMU * anyway. */ - if (kvm->arch.n_used_mmu_pages > 0) { - if (!nr_to_scan--) - break; + if (!kvm->arch.n_used_mmu_pages) continue; - } idx = srcu_read_lock(&kvm->srcu); spin_lock(&kvm->mmu_lock); -- cgit v1.2.3-70-g09d2 From 934ad4c235f87dcb9206abdfa22922358999afab Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 19:49:09 -0400 Subject: vfio: don't dereference after kfree... Acked-by: Alex Williamson Signed-off-by: Al Viro --- drivers/vfio/vfio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index 9591e2b509d..0b025d58de8 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -416,8 +416,9 @@ static void vfio_device_release(struct kref *kref) /* Device reference always implies a group reference */ static void vfio_device_put(struct vfio_device *device) { + struct vfio_group *group = device->group; kref_put(&device->kref, vfio_device_release); - vfio_group_put(device->group); + vfio_group_put(group); } static void vfio_device_get(struct vfio_device *device) -- cgit v1.2.3-70-g09d2 From 8ad5db8a8ddbe3bd33078863a027011e28f1f4ee Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 20:10:46 -0400 Subject: introduce kref_put_mutex() equivalent of mutex_lock(mutex); if (!kref_put(kref, release)) mutex_unlock(mutex); Signed-off-by: Al Viro --- include/linux/kref.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/include/linux/kref.h b/include/linux/kref.h index 9c07dcebded..65af6887872 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -18,6 +18,7 @@ #include #include #include +#include struct kref { atomic_t refcount; @@ -93,4 +94,21 @@ static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref) { return kref_sub(kref, 1, release); } + +static inline int kref_put_mutex(struct kref *kref, + void (*release)(struct kref *kref), + struct mutex *lock) +{ + WARN_ON(release == NULL); + if (unlikely(!atomic_add_unless(&kref->refcount, -1, 1))) { + mutex_lock(lock); + if (unlikely(!atomic_dec_and_test(&kref->refcount))) { + mutex_unlock(lock); + return 0; + } + release(kref); + return 1; + } + return 0; +} #endif /* _KREF_H_ */ -- cgit v1.2.3-70-g09d2 From 6d2cd3ce815b302e885b44ca1bdbe3c7db321c7a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 21:27:32 -0400 Subject: vfio: get rid of open-coding kref_put_mutex Acked-by: Alex Williamson Signed-off-by: Al Viro --- drivers/vfio/vfio.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index 0b025d58de8..92b85676e6b 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -264,6 +264,7 @@ static struct vfio_group *vfio_create_group(struct iommu_group *iommu_group) return group; } +/* called with vfio.group_lock held */ static void vfio_group_release(struct kref *kref) { struct vfio_group *group = container_of(kref, struct vfio_group, kref); @@ -287,13 +288,7 @@ static void vfio_group_release(struct kref *kref) static void vfio_group_put(struct vfio_group *group) { - mutex_lock(&vfio.group_lock); - /* - * Release needs to unlock to unregister the notifier, so only - * unlock if not released. - */ - if (!kref_put(&group->kref, vfio_group_release)) - mutex_unlock(&vfio.group_lock); + kref_put_mutex(&group->kref, vfio_group_release, &vfio.group_lock); } /* Assume group_lock or group reference is held */ -- cgit v1.2.3-70-g09d2 From 90b1253e4139776e8257914ae9e2292d0de2fecc Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 21:29:06 -0400 Subject: vfio: get rid of vfio_device_put()/vfio_group_get_device* races we really need to make sure that dropping the last reference happens under the group->device_lock; otherwise a loop (under device_lock) might find vfio_device instance that is being freed right now, has already dropped the last reference and waits on device_lock to exclude the sucker from the list. Acked-by: Alex Williamson Signed-off-by: Al Viro --- drivers/vfio/vfio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index 92b85676e6b..887ae43276b 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -396,7 +396,6 @@ static void vfio_device_release(struct kref *kref) struct vfio_device, kref); struct vfio_group *group = device->group; - mutex_lock(&group->device_lock); list_del(&device->group_next); mutex_unlock(&group->device_lock); @@ -412,7 +411,7 @@ static void vfio_device_release(struct kref *kref) static void vfio_device_put(struct vfio_device *device) { struct vfio_group *group = device->group; - kref_put(&device->kref, vfio_device_release); + kref_put_mutex(&device->kref, vfio_device_release, &group->device_lock); vfio_group_put(group); } -- cgit v1.2.3-70-g09d2 From 31605debdf5459cc8aacabf192a911a803a81c26 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 21:32:56 -0400 Subject: vfio: grab vfio_device reference *before* exposing the sucker via fd_install() It's not critical (anymore) since another thread closing the file will block on ->device_lock before it gets to dropping the final reference, but it's definitely cleaner that way... Acked-by: Alex Williamson Signed-off-by: Al Viro --- drivers/vfio/vfio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index 887ae43276b..17830c9c7cc 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -1111,10 +1111,10 @@ static int vfio_group_get_device_fd(struct vfio_group *group, char *buf) */ filep->f_mode |= (FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE); - fd_install(ret, filep); - vfio_device_get(device); atomic_inc(&group->container_users); + + fd_install(ret, filep); break; } mutex_unlock(&group->device_lock); -- cgit v1.2.3-70-g09d2 From 98022748f6c7bce85b9f123fd4d1a621219dd8d9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 22:42:36 -0400 Subject: eventpoll: use-after-possible-free in epoll_create1() As soon as we'd installed the file into descriptor table, it can get closed by another thread. Freeing ep in process... Signed-off-by: Al Viro --- fs/eventpoll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/eventpoll.c b/fs/eventpoll.c index 1c8b5567080..eedec84c180 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -1654,8 +1654,8 @@ SYSCALL_DEFINE1(epoll_create1, int, flags) error = PTR_ERR(file); goto out_free_fd; } - fd_install(fd, file); ep->file = file; + fd_install(fd, file); return fd; out_free_fd: -- cgit v1.2.3-70-g09d2 From 55852635a8e2803cbc22d0e143d727813f0fcdb5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 18 Aug 2012 17:39:25 -0700 Subject: fs: fix fs/namei.c kernel-doc warnings Fix kernel-doc warnings in fs/namei.c: Warning(fs/namei.c:360): No description found for parameter 'inode' Warning(fs/namei.c:672): No description found for parameter 'nd' Signed-off-by: Randy Dunlap Cc: Alexander Viro Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Al Viro --- fs/namei.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/namei.c b/fs/namei.c index db76b866a09..dd1ed1b8e98 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -352,6 +352,7 @@ int __inode_permission(struct inode *inode, int mask) /** * sb_permission - Check superblock-level permissions * @sb: Superblock of inode to check permission on + * @inode: Inode to check permission on * @mask: Right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC) * * Separate out file-system wide checks from inode-specific permission checks. @@ -656,6 +657,7 @@ int sysctl_protected_hardlinks __read_mostly = 1; /** * may_follow_link - Check symlink following for unsafe situations * @link: The path of the symlink + * @nd: nameidata pathwalk data * * In the case of the sysctl_protected_symlinks sysctl being enabled, * CAP_DAC_OVERRIDE needs to be specifically ignored if the symlink is -- cgit v1.2.3-70-g09d2 From 88ec2789d856056344161aa20420dd37e893b0fe Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 21 Aug 2012 15:05:14 +0200 Subject: task_work: add a scheduling point in task_work_run() It seems commit 4a9d4b02 (switch fput to task_work_add) reintroduced the problem addressed in commit 944be0b2 (close_files(): add scheduling point) If a server process with a lot of files (say 2 million tcp sockets) is killed, we can spend a lot of time in task_work_run() and trigger a soft lockup. Signed-off-by: Eric Dumazet Signed-off-by: Al Viro --- kernel/task_work.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/task_work.c b/kernel/task_work.c index 91d4e1742a0..d320d44903b 100644 --- a/kernel/task_work.c +++ b/kernel/task_work.c @@ -75,6 +75,7 @@ void task_work_run(void) p = q->next; q->func(q); q = p; + cond_resched(); } } } -- cgit v1.2.3-70-g09d2 From 69f9025894c391fec2f7c7ea9150203418454915 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 22 Aug 2012 16:47:28 +0300 Subject: UBIFS: fix error messages spelling Corruptio -> corruption. Signed-off-by: Artem Bityutskiy --- fs/ubifs/recovery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c index c30d976b4be..edeec499c04 100644 --- a/fs/ubifs/recovery.c +++ b/fs/ubifs/recovery.c @@ -788,7 +788,7 @@ struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum, corrupted_rescan: /* Re-scan the corrupted data with verbose messages */ - ubifs_err("corruptio %d", ret); + ubifs_err("corruption %d", ret); ubifs_scan_a_node(c, buf, len, lnum, offs, 1); corrupted: ubifs_scanned_corruption(c, lnum, offs, buf); -- cgit v1.2.3-70-g09d2 From 53c84983549230495156d7da666cd1acdb9c9015 Mon Sep 17 00:00:00 2001 From: Simon Farnsworth Date: Wed, 22 Aug 2012 11:17:17 +0100 Subject: HID: Remove QUANTA from special drivers list This QUANTA device is driven by the generic hid-multitouch.ko driver, and therefore shouldn't be in the special drivers list. This has been an oversight in 4fa3a58 ("HID: hid-multitouch: Switch to device groups"). Signed-off-by: Simon Farnsworth Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 500844f04f9..78f0ee74b85 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1624,7 +1624,6 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) }, { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ARVO) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) }, -- cgit v1.2.3-70-g09d2 From fea7a08acb13524b47711625eebea40a0ede69a0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 22 Aug 2012 13:29:06 -0700 Subject: Linux 3.6-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9cc77acfc88..354026873b1 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v1.2.3-70-g09d2 From 5ad105e569c45dcfad50d724c61d5061248be755 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 19 Aug 2012 14:34:31 +0300 Subject: KVM: x86 emulator: use stack size attribute to mask rsp in stack ops The sub-register used to access the stack (sp, esp, or rsp) is not determined by the address size attribute like other memory references, but by the stack segment's B bit (if not in x86_64 mode). Fix by using the existing stack_mask() to figure out the correct mask. This long-existing bug was exposed by a combination of a27685c33acccce (emulate invalid guest state by default), which causes many more instructions to be emulated, and a seabios change (possibly a bug) which causes the high 16 bits of esp to become polluted across calls to real mode software interrupts. Signed-off-by: Avi Kivity Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/emulate.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 97d9a9914ba..a3b57a27be8 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -475,13 +475,26 @@ register_address(struct x86_emulate_ctxt *ctxt, unsigned long reg) return address_mask(ctxt, reg); } +static void masked_increment(ulong *reg, ulong mask, int inc) +{ + assign_masked(reg, *reg + inc, mask); +} + static inline void register_address_increment(struct x86_emulate_ctxt *ctxt, unsigned long *reg, int inc) { + ulong mask; + if (ctxt->ad_bytes == sizeof(unsigned long)) - *reg += inc; + mask = ~0UL; else - *reg = (*reg & ~ad_mask(ctxt)) | ((*reg + inc) & ad_mask(ctxt)); + mask = ad_mask(ctxt); + masked_increment(reg, mask, inc); +} + +static void rsp_increment(struct x86_emulate_ctxt *ctxt, int inc) +{ + masked_increment(&ctxt->regs[VCPU_REGS_RSP], stack_mask(ctxt), inc); } static inline void jmp_rel(struct x86_emulate_ctxt *ctxt, int rel) @@ -1522,8 +1535,8 @@ static int push(struct x86_emulate_ctxt *ctxt, void *data, int bytes) { struct segmented_address addr; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], -bytes); - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + rsp_increment(ctxt, -bytes); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; return segmented_write(ctxt, addr, data, bytes); @@ -1542,13 +1555,13 @@ static int emulate_pop(struct x86_emulate_ctxt *ctxt, int rc; struct segmented_address addr; - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; rc = segmented_read(ctxt, addr, dest, len); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], len); + rsp_increment(ctxt, len); return rc; } @@ -1688,8 +1701,7 @@ static int em_popa(struct x86_emulate_ctxt *ctxt) while (reg >= VCPU_REGS_RAX) { if (reg == VCPU_REGS_RSP) { - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], - ctxt->op_bytes); + rsp_increment(ctxt, ctxt->op_bytes); --reg; } @@ -2825,7 +2837,7 @@ static int em_ret_near_imm(struct x86_emulate_ctxt *ctxt) rc = emulate_pop(ctxt, &ctxt->dst.val, ctxt->op_bytes); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], ctxt->src.val); + rsp_increment(ctxt, ctxt->src.val); return X86EMUL_CONTINUE; } -- cgit v1.2.3-70-g09d2 From 36bf50d7697be18c6bfd0401e037df10bff1e573 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Tue, 31 Jul 2012 15:41:45 +0200 Subject: x86, microcode, AMD: Fix broken ucode patch size check This issue was recently observed on an AMD C-50 CPU where a patch of maximum size was applied. Commit be62adb49294 ("x86, microcode, AMD: Simplify ucode verification") added current_size in get_matching_microcode(). This is calculated as size of the ucode patch + 8 (ie. size of the header). Later this is compared against the maximum possible ucode patch size for a CPU family. And of course this fails if the patch has already maximum size. Cc: [3.3+] Signed-off-by: Andreas Herrmann Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/1344361461-10076-1-git-send-email-bp@amd64.org Signed-off-by: H. Peter Anvin --- arch/x86/kernel/microcode_amd.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 8a2ce8fd41c..82746f942cd 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -143,11 +143,12 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, unsigned int *current_size) { struct microcode_header_amd *mc_hdr; - unsigned int actual_size; + unsigned int actual_size, patch_size; u16 equiv_cpu_id; /* size of the current patch we're staring at */ - *current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE; + patch_size = *(u32 *)(ucode_ptr + 4); + *current_size = patch_size + SECTION_HDR_SIZE; equiv_cpu_id = find_equiv_id(); if (!equiv_cpu_id) @@ -174,7 +175,7 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, /* * now that the header looks sane, verify its size */ - actual_size = verify_ucode_size(cpu, *current_size, leftover_size); + actual_size = verify_ucode_size(cpu, patch_size, leftover_size); if (!actual_size) return 0; -- cgit v1.2.3-70-g09d2 From 43ca6cb28c871f2fbad10117b0648e5ae3b0f638 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Tue, 21 Aug 2012 17:36:28 +0200 Subject: hwmon: (asus_atk0110) Add quirk for Asus M5A78L MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The old interface is bugged and reads the wrong sensor when retrieving the reading for the chassis fan (it reads the CPU sensor); the new interface works fine. Reported-by: Göran Uddeborg Cc: stable@vger.kernel.org Tested-by: Göran Uddeborg Signed-off-by: Luca Tettamanti Signed-off-by: Guenter Roeck --- drivers/hwmon/asus_atk0110.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 351d1f4593e..4ee57894872 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -34,6 +34,12 @@ static const struct dmi_system_id __initconst atk_force_new_if[] = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "SABERTOOTH X58") } + }, { + /* Old interface reads the same sensor for fan0 and fan1 */ + .ident = "Asus M5A78L", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "M5A78L") + } }, { } }; -- cgit v1.2.3-70-g09d2 From b70ad586162609141f0aa9eb34790f31a8954f89 Mon Sep 17 00:00:00 2001 From: "Xu, Anhua" Date: Mon, 13 Aug 2012 03:08:33 +0000 Subject: drm/i915: fix wrong order of parameters in port checking functions Wrong order of parameters passed-in when calling hdmi/adpa /lvds_pipe_enabled(), 2nd and 3rd parameters are reversed. This bug was indroduced by commit 1519b9956eb4b4180fa3f47c73341463cdcfaa37 Author: Keith Packard Date: Sat Aug 6 10:35:34 2011 -0700 drm/i915: Fix PCH port pipe select in CPT disable paths The reachable tag for this commit is v3.1-rc1-3-g1519b99 Signed-off-by: Anhua Xu Reviewed-by: Chris Wilson Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44876 Tested-by: Daniel Schroeder Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a69a3d0d3ac..2dfa6cf4886 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1384,7 +1384,7 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); - WARN(hdmi_pipe_enabled(dev_priv, val, pipe), + WARN(hdmi_pipe_enabled(dev_priv, pipe, val), "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); @@ -1404,13 +1404,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, reg = PCH_ADPA; val = I915_READ(reg); - WARN(adpa_pipe_enabled(dev_priv, val, pipe), + WARN(adpa_pipe_enabled(dev_priv, pipe, val), "PCH VGA enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); reg = PCH_LVDS; val = I915_READ(reg); - WARN(lvds_pipe_enabled(dev_priv, val, pipe), + WARN(lvds_pipe_enabled(dev_priv, pipe, val), "PCH LVDS enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); @@ -1872,7 +1872,7 @@ static void disable_pch_hdmi(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); - if (hdmi_pipe_enabled(dev_priv, val, pipe)) { + if (hdmi_pipe_enabled(dev_priv, pipe, val)) { DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n", reg, pipe); I915_WRITE(reg, val & ~PORT_ENABLE); @@ -1894,12 +1894,12 @@ static void intel_disable_pch_ports(struct drm_i915_private *dev_priv, reg = PCH_ADPA; val = I915_READ(reg); - if (adpa_pipe_enabled(dev_priv, val, pipe)) + if (adpa_pipe_enabled(dev_priv, pipe, val)) I915_WRITE(reg, val & ~ADPA_DAC_ENABLE); reg = PCH_LVDS; val = I915_READ(reg); - if (lvds_pipe_enabled(dev_priv, val, pipe)) { + if (lvds_pipe_enabled(dev_priv, pipe, val)) { DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val); I915_WRITE(reg, val & ~LVDS_PORT_EN); POSTING_READ(reg); -- cgit v1.2.3-70-g09d2 From 5ee369138d28c17305e1cdc662a62a2fc83d80d7 Mon Sep 17 00:00:00 2001 From: Vijay Purushothaman Date: Thu, 23 Aug 2012 12:08:57 +0530 Subject: drm/i915: fix color order for BGR formats on IVB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is already fixed for ILK and SNB in the below commit but somehow IVB is missed. commit ab2f9df10dd955f1fc0a8650e377588c98f1c029 Author: Jesse Barnes Date: Mon Feb 27 12:40:10 2012 -0800 drm/i915: fix color order for BGR formats on SNB Had the wrong bits and field definitions. Signed-off-by: Vijay Purushothaman Reviewed-by: Antti Koskipää Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sprite.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index cc8df4de2d9..7644f31a377 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -60,11 +60,11 @@ ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb, switch (fb->pixel_format) { case DRM_FORMAT_XBGR8888: - sprctl |= SPRITE_FORMAT_RGBX888; + sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX; pixel_size = 4; break; case DRM_FORMAT_XRGB8888: - sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX; + sprctl |= SPRITE_FORMAT_RGBX888; pixel_size = 4; break; case DRM_FORMAT_YUYV: -- cgit v1.2.3-70-g09d2 From 676ce6d5ca3098339c028d44fe0427d1566a4d2d Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 23 Aug 2012 12:17:36 +0200 Subject: block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe --- fs/buffer.c | 66 ++++++++++++++++++++++++++++--------------------------------- 1 file changed, 30 insertions(+), 36 deletions(-) diff --git a/fs/buffer.c b/fs/buffer.c index 9f6d2e41281..58e2e7b7737 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -914,7 +914,7 @@ link_dev_buffers(struct page *page, struct buffer_head *head) /* * Initialise the state of a blockdev page's buffers. */ -static void +static sector_t init_page_buffers(struct page *page, struct block_device *bdev, sector_t block, int size) { @@ -936,33 +936,41 @@ init_page_buffers(struct page *page, struct block_device *bdev, block++; bh = bh->b_this_page; } while (bh != head); + + /* + * Caller needs to validate requested block against end of device. + */ + return end_block; } /* * Create the page-cache page that contains the requested block. * - * This is user purely for blockdev mappings. + * This is used purely for blockdev mappings. */ -static struct page * +static int grow_dev_page(struct block_device *bdev, sector_t block, - pgoff_t index, int size) + pgoff_t index, int size, int sizebits) { struct inode *inode = bdev->bd_inode; struct page *page; struct buffer_head *bh; + sector_t end_block; + int ret = 0; /* Will call free_more_memory() */ page = find_or_create_page(inode->i_mapping, index, (mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS)|__GFP_MOVABLE); if (!page) - return NULL; + return ret; BUG_ON(!PageLocked(page)); if (page_has_buffers(page)) { bh = page_buffers(page); if (bh->b_size == size) { - init_page_buffers(page, bdev, block, size); - return page; + end_block = init_page_buffers(page, bdev, + index << sizebits, size); + goto done; } if (!try_to_free_buffers(page)) goto failed; @@ -982,14 +990,14 @@ grow_dev_page(struct block_device *bdev, sector_t block, */ spin_lock(&inode->i_mapping->private_lock); link_dev_buffers(page, bh); - init_page_buffers(page, bdev, block, size); + end_block = init_page_buffers(page, bdev, index << sizebits, size); spin_unlock(&inode->i_mapping->private_lock); - return page; - +done: + ret = (block < end_block) ? 1 : -ENXIO; failed: unlock_page(page); page_cache_release(page); - return NULL; + return ret; } /* @@ -999,7 +1007,6 @@ failed: static int grow_buffers(struct block_device *bdev, sector_t block, int size) { - struct page *page; pgoff_t index; int sizebits; @@ -1023,22 +1030,14 @@ grow_buffers(struct block_device *bdev, sector_t block, int size) bdevname(bdev, b)); return -EIO; } - block = index << sizebits; + /* Create a page with the proper size buffers.. */ - page = grow_dev_page(bdev, block, index, size); - if (!page) - return 0; - unlock_page(page); - page_cache_release(page); - return 1; + return grow_dev_page(bdev, block, index, size, sizebits); } static struct buffer_head * __getblk_slow(struct block_device *bdev, sector_t block, int size) { - int ret; - struct buffer_head *bh; - /* Size must be multiple of hard sectorsize */ if (unlikely(size & (bdev_logical_block_size(bdev)-1) || (size < 512 || size > PAGE_SIZE))) { @@ -1051,21 +1050,20 @@ __getblk_slow(struct block_device *bdev, sector_t block, int size) return NULL; } -retry: - bh = __find_get_block(bdev, block, size); - if (bh) - return bh; + for (;;) { + struct buffer_head *bh; + int ret; - ret = grow_buffers(bdev, block, size); - if (ret == 0) { - free_more_memory(); - goto retry; - } else if (ret > 0) { bh = __find_get_block(bdev, block, size); if (bh) return bh; + + ret = grow_buffers(bdev, block, size); + if (ret < 0) + return NULL; + if (ret == 0) + free_more_memory(); } - return NULL; } /* @@ -1321,10 +1319,6 @@ EXPORT_SYMBOL(__find_get_block); * which corresponds to the passed block_device, block and size. The * returned buffer has its reference count incremented. * - * __getblk() cannot fail - it just keeps trying. If you pass it an - * illegal block number, __getblk() will happily return a buffer_head - * which represents the non-existent block. Very weird. - * * __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers() * attempt is failing. FIXME, perhaps? */ -- cgit v1.2.3-70-g09d2 From c944b0b9354ea06ffb0c8a7178949f1185f9f499 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 18 Aug 2012 14:27:32 +0800 Subject: ARM: imx6: spin the cpu until hardware takes it down Though commit 602bf40 (ARM: imx6: exit coherency when shutting down a cpu) improves the stability of imx6q cpu hotplug a lot, there are still hangs seen with a more stressful hotplug testing. It's expected that once imx_enable_cpu(cpu, false) is called, the cpu will be taken down by hardware immediately, and the code after that will not get any chance to execute. However, this is not always the case from the testing. The cpu could possibly be alive for a few cycles before hardware actually takes it down. So rather than letting cpu execute some code that could cause a hang in these cycles, let's make the cpu spin there and wait for hardware to take it down. Cc: Signed-off-by: Shawn Guo --- arch/arm/mach-imx/hotplug.c | 23 +++-------------------- 1 file changed, 3 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d56c1a..f8f7437c83b 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } int platform_cpu_disable(unsigned int cpu) -- cgit v1.2.3-70-g09d2 From a46d2619d7180bda12bad2bf15bbd0731dfc2dcf Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 22 Aug 2012 21:46:39 +0800 Subject: ARM: dts: imx51-babbage: fix esdhc cd/wp properties The binding doc and dts use properties "fsl,{cd,wp}-internal" while esdhc driver uses "fsl,{cd,wp}-controller". Fix binding doc and dts to get them match driver code. Reported-by: Chris Ball Signed-off-by: Shawn Guo Cc: Acked-by: Chris Ball --- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt | 8 ++++---- arch/arm/boot/dts/imx51-babbage.dts | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 70cd49b1caa..1dd622546d0 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -10,8 +10,8 @@ Required properties: - compatible : Should be "fsl,-esdhc" Optional properties: -- fsl,cd-internal : Indicate to use controller internal card detection -- fsl,wp-internal : Indicate to use controller internal write protection +- fsl,cd-controller : Indicate to use controller internal card detection +- fsl,wp-controller : Indicate to use controller internal write protection Examples: @@ -19,8 +19,8 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; }; esdhc@70008000 { diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cd86177a3ea..59d9789e550 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,8 +25,8 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; -- cgit v1.2.3-70-g09d2 From a1dca315ce3f78347bca8ce8befe3cc71ae63b7e Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 23 Aug 2012 15:35:26 +0200 Subject: MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module If the controller has no PCIe module attached, accessing of the device configuration space causes a data bus error. Avoid this by checking the status of the PCIe link in advance, and indicate an error if the link is down. Signed-off-by: Gabor Juhos Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4293/ Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-ar724x.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c index 414a7459858..86d77a66645 100644 --- a/arch/mips/pci/pci-ar724x.c +++ b/arch/mips/pci/pci-ar724x.c @@ -23,9 +23,12 @@ #define AR724X_PCI_MEM_BASE 0x10000000 #define AR724X_PCI_MEM_SIZE 0x08000000 +#define AR724X_PCI_REG_RESET 0x18 #define AR724X_PCI_REG_INT_STATUS 0x4c #define AR724X_PCI_REG_INT_MASK 0x50 +#define AR724X_PCI_RESET_LINK_UP BIT(0) + #define AR724X_PCI_INT_DEV0 BIT(14) #define AR724X_PCI_IRQ_COUNT 1 @@ -38,6 +41,15 @@ static void __iomem *ar724x_pci_ctrl_base; static u32 ar724x_pci_bar0_value; static bool ar724x_pci_bar0_is_cached; +static bool ar724x_pci_link_up; + +static inline bool ar724x_pci_check_link(void) +{ + u32 reset; + + reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET); + return reset & AR724X_PCI_RESET_LINK_UP; +} static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, uint32_t *value) @@ -46,6 +58,9 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base; u32 data; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -96,6 +111,9 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, u32 data; int s; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -280,6 +298,10 @@ int __init ar724x_pcibios_init(int irq) if (ar724x_pci_ctrl_base == NULL) goto err_unmap_devcfg; + ar724x_pci_link_up = ar724x_pci_check_link(); + if (!ar724x_pci_link_up) + pr_warn("ar724x: PCIe link is down\n"); + ar724x_pci_irq_init(irq); register_pci_controller(&ar724x_pci_controller); -- cgit v1.2.3-70-g09d2 From c96aae1f7f393387d160211f60398d58463a7e65 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 17 Aug 2012 16:43:28 -0400 Subject: xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M. When we are finished with return PFNs to the hypervisor, then populate it back, and also mark the E820 MMIO and E820 gaps as IDENTITY_FRAMEs, we then call P2M to set areas that can be used for ballooning. We were off by one, and ended up over-writting a P2M entry that most likely was an IDENTITY_FRAME. For example: 1-1 mapping on 40000->40200 1-1 mapping on bc558->bc5ac 1-1 mapping on bc5b4->bc8c5 1-1 mapping on bc8c6->bcb7c 1-1 mapping on bcd00->100000 Released 614 pages of unused memory Set 277889 page(s) to 1-1 mapping Populating 40200-40466 pfn range: 614 pages added => here we set from 40466 up to bc559 P2M tree to be INVALID_P2M_ENTRY. We should have done it up to bc558. The end result is that if anybody is trying to construct a PTE for PFN bc558 they end up with ~PAGE_PRESENT. CC: stable@vger.kernel.org Reported-by-and-Tested-by: Andre Przywara Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/setup.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index ead85576d54..d11ca11d14f 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -78,9 +78,16 @@ static void __init xen_add_extra_mem(u64 start, u64 size) memblock_reserve(start, size); xen_max_p2m_pfn = PFN_DOWN(start + size); + for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) { + unsigned long mfn = pfn_to_mfn(pfn); + + if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn)) + continue; + WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n", + pfn, mfn); - for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++) __set_phys_to_machine(pfn, INVALID_P2M_ENTRY); + } } static unsigned long __init xen_do_chunk(unsigned long start, -- cgit v1.2.3-70-g09d2 From c7a9b09b1a4a1fbccb2ec409daec95f9068d77c0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Aug 2012 20:51:54 +0000 Subject: ARM: omap: allow building omap44xx without SMP The new omap4 cpuidle implementation currently requires ARCH_NEEDS_CPU_IDLE_COUPLED, which only works on SMP. This patch makes it possible to build a non-SMP kernel for that platform. This is not normally desired for end-users but can be useful for testing. Without this patch, building rand-0y2jSKT results in: drivers/cpuidle/coupled.c: In function 'cpuidle_coupled_poke': drivers/cpuidle/coupled.c:317:3: error: implicit declaration of function '__smp_call_function_single' [-Werror=implicit-function-declaration] It's not clear if this patch is the best solution for the problem at hand. I have made sure that we can now build the kernel in all configurations, but that does not mean it will actually work on an OMAP44xx. Signed-off-by: Arnd Bergmann Acked-by: Santosh Shilimkar Tested-by: Santosh Shilimkar Cc: Kevin Hilman Cc: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 2 +- arch/arm/mach-omap2/cpuidle44xx.c | 3 ++- include/linux/cpuidle.h | 4 ++++ 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db025f77..66a8be331ca 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,7 +62,7 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM - select ARCH_NEEDS_CPU_IDLE_COUPLED + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP config SOC_OMAP5 bool "TI OMAP5" diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index ee05e193fc6..288bee6cbb7 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -238,8 +238,9 @@ int __init omap4_idle_init(void) for_each_cpu(cpu_id, cpu_online_mask) { dev = &per_cpu(omap4_idle_dev, cpu_id); dev->cpu = cpu_id; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED dev->coupled_cpus = *cpu_online_mask; - +#endif cpuidle_register_driver(&omap4_idle_driver); if (cpuidle_register_device(dev)) { diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 040b13b5c14..279b1eaa8b7 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -194,6 +194,10 @@ static inline int cpuidle_play_dead(void) {return -ENODEV; } #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a); +#else +static inline void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a) +{ +} #endif /****************************** -- cgit v1.2.3-70-g09d2 From a28eecef8ac2671dce7d892165bf374eeaa04e15 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Aug 2012 21:56:39 +0000 Subject: ARM: imx: build pm-imx5 code only when PM is enabled This moves the imx5 pm code out of the list of unconditionally compiled files for imx5, mirroring what we already do for imx6 and how it was done before the code was move from mach-mx5 to mach-imx in v3.3. Without this patch, building with CONFIG_PM disabled results in: arch/arm/mach-imx/pm-imx5.c:202:116: error: redefinition of 'imx51_pm_init' arch/arm/mach-imx/include/mach-imx/common.h:154:91: note: previous definition of 'imx51_pm_init' was here arch/arm/mach-imx/pm-imx5.c:209:116: error: redefinition of 'imx53_pm_init' arch/arm/mach-imx/include/mach-imx/common.h:155:91: note: previous definition of 'imx53_pm_init' was here Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Sascha Hauer Cc: stable@vger.kernel.org --- arch/arm/mach-imx/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c226e4c..e08adb7b8dd 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o -- cgit v1.2.3-70-g09d2 From 9f9ba0fdecff64ffc6986645216ffc3a8b664f08 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 16 Aug 2012 07:42:50 +0000 Subject: ARM: imx: fix ksz9021rn_phy_fixup The ksz9021rn_phy_fixup and mx6q_sabrelite functions try to set up an ethernet phy if they can. They do check whether phylib is enabled, but unfortunately the functions can only be called from platform code if phylib is builtin, not if it is a module Without this patch, building with a modular phylib results in: arch/arm/mach-imx/mach-imx6q.c: In function 'imx6q_sabrelite_init': arch/arm/mach-imx/mach-imx6q.c:120:5: error: 'ksz9021rn_phy_fixup' undeclared (first use in this function) arch/arm/mach-imx/mach-imx6q.c:120:5: note: each undeclared identifier is reported only once for each function it appears in The bug was originally reported by Artem Bityutskiy but only partially fixed in ef441806 "ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled". Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Artem Bityutskiy Cc: Sascha Hauer --- arch/arm/mach-imx/mach-imx6q.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a7..045b3f6a387 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -71,7 +71,7 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -112,7 +112,7 @@ put_clk: static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); -- cgit v1.2.3-70-g09d2 From f637c4c9405e21f44cf0045eaf77eddd3a79ca5a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 16 Aug 2012 10:40:40 +0000 Subject: ARM: imx: select CPU_FREQ_TABLE when needed The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers, so it needs to select that code to be built. This problem has apparently existed since the i.MX cpufreq code was first merged in v2.6.37. Building IMX without CPU_FREQ_TABLE results in: arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit': arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr' arch/arm/plat-mxc/built-in.o: In function `mxc_set_target': arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target' arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed': arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify' arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init': arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo' arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr' Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Sascha Hauer Cc: Yong Shen Cc: stable@vger.kernel.org --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe..84b5a0cb7a5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2150,6 +2150,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. -- cgit v1.2.3-70-g09d2 From 1fc593feaf8e440511f381f4cdff483b55bbf546 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 17 Aug 2012 00:16:08 +0000 Subject: ARM: imx: build i.MX6 functions only when needed The head-v7.S contains a call to the generic cpu_suspend function, which is only available when selected by the i.MX6 code. As pointed out by Shawn Guo, i.MX5 does not actually use any functions defined in head-v7.S. It is also needed only for the i.MX6 power management code and for the SMP code, so we can restrict building this file to situations in which at least one of those two is present. Finally, other platforms with a similar file call it headsmp.S, so we can rename it to the same for consistency. Without this patch, building imx5 standalone results in: arch/arm/mach-imx/built-in.o: In function `v7_cpu_resume': arch/arm/mach-imx/head-v7.S:104: undefined reference to `cpu_resume' Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Eric Miao Cc: stable@vger.kernel.org --- arch/arm/mach-imx/Makefile | 7 ++- arch/arm/mach-imx/head-v7.S | 106 -------------------------------------------- arch/arm/mach-imx/headsmp.S | 106 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 109 insertions(+), 110 deletions(-) delete mode 100644 arch/arm/mach-imx/head-v7.S create mode 100644 arch/arm/mach-imx/headsmp.S diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index e08adb7b8dd..d004d37ad9d 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -71,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S deleted file mode 100644 index 7e49deb128a..00000000000 --- a/arch/arm/mach-imx/head-v7.S +++ /dev/null @@ -1,106 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include - - .section ".text.head", "ax" - -/* - * The secondary kernel init calls v7_flush_dcache_all before it enables - * the L1; however, the L1 comes out of reset in an undefined state, so - * the clean + invalidate performed by v7_flush_dcache_all causes a bunch - * of cache lines with uninitialized data and uninitialized tags to get - * written out to memory, which does really unpleasant things to the main - * processor. We fix this by performing an invalidate, rather than a - * clean + invalidate, before jumping into the kernel. - * - * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs - * to be called for both secondary cores startup and primary core resume - * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S. - */ -ENTRY(v7_invalidate_l1) - mov r0, #0 - mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mcr p15, 2, r0, c0, c0, 0 - mrc p15, 1, r0, c0, c0, 0 - - ldr r1, =0x7fff - and r2, r1, r0, lsr #13 - - ldr r1, =0x3ff - - and r3, r1, r0, lsr #3 @ NumWays - 1 - add r2, r2, #1 @ NumSets - - and r0, r0, #0x7 - add r0, r0, #4 @ SetShift - - clz r1, r3 @ WayShift - add r4, r3, #1 @ NumWays -1: sub r2, r2, #1 @ NumSets-- - mov r3, r4 @ Temp = NumWays -2: subs r3, r3, #1 @ Temp-- - mov r5, r3, lsl r1 - mov r6, r2, lsl r0 - orr r5, r5, r6 @ Reg = (Temp< +#include +#include +#include + + .section ".text.head", "ax" + +/* + * The secondary kernel init calls v7_flush_dcache_all before it enables + * the L1; however, the L1 comes out of reset in an undefined state, so + * the clean + invalidate performed by v7_flush_dcache_all causes a bunch + * of cache lines with uninitialized data and uninitialized tags to get + * written out to memory, which does really unpleasant things to the main + * processor. We fix this by performing an invalidate, rather than a + * clean + invalidate, before jumping into the kernel. + * + * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs + * to be called for both secondary cores startup and primary core resume + * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S. + */ +ENTRY(v7_invalidate_l1) + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 2, r0, c0, c0, 0 + mrc p15, 1, r0, c0, c0, 0 + + ldr r1, =0x7fff + and r2, r1, r0, lsr #13 + + ldr r1, =0x3ff + + and r3, r1, r0, lsr #3 @ NumWays - 1 + add r2, r2, #1 @ NumSets + + and r0, r0, #0x7 + add r0, r0, #4 @ SetShift + + clz r1, r3 @ WayShift + add r4, r3, #1 @ NumWays +1: sub r2, r2, #1 @ NumSets-- + mov r3, r4 @ Temp = NumWays +2: subs r3, r3, #1 @ Temp-- + mov r5, r3, lsl r1 + mov r6, r2, lsl r0 + orr r5, r5, r6 @ Reg = (Temp< Date: Wed, 15 Aug 2012 20:34:48 +0000 Subject: ARM: ux500: don't select LEDS_GPIO for snowball Using 'select' in Kconfig is hard, a platform cannot just enable a driver without also making sure that its subsystem is there. Also, there is no actual code dependency between the platform and the gpio leds driver. Without this patch, building without LEDS_CLASS esults in: drivers/built-in.o: In function `create_gpio_led.part.2': governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register' drivers/built-in.o: In function `gpio_led_remove': governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister' This reverts 8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio support for Snowball" that introduced the regression and did not provide a helpful explanation. In order to leave the GPIO LED code still present in normal builds, this also enables the symbol in u8500_defconfig, in addition to the other LED drivers that are already selected there. Signed-off-by: Arnd Bergmann Cc: Linus Walleij Cc: Lee Jones --- arch/arm/configs/u8500_defconfig | 1 + arch/arm/mach-ux500/Kconfig | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661d1cf..da6845493ca 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c013bbf79ca..53d3d46dec1 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,7 +41,6 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 - select LEDS_GPIO help Include support for the snowball development platform. -- cgit v1.2.3-70-g09d2 From 823f74733d8f89eaabfb25f93680fb7e05861348 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 22 Aug 2012 13:43:24 -0500 Subject: powerpc/fsl: update defconfigs run make savedefconfig on fsl defconfigs. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/p1023rds_defconfig | 30 ++++++++------------------- arch/powerpc/configs/corenet32_smp_defconfig | 28 +++++++------------------ arch/powerpc/configs/mpc83xx_defconfig | 17 ++++----------- arch/powerpc/configs/mpc85xx_defconfig | 31 +++++++--------------------- arch/powerpc/configs/mpc85xx_smp_defconfig | 31 +++++++--------------------- 5 files changed, 35 insertions(+), 102 deletions(-) diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index f4337bacd0e..a79b0a9316a 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -6,28 +6,27 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_EMBEDDED=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P1023_RDS=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_CPM2=y -CONFIG_GPIO_MPC8XXX=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y @@ -67,7 +66,6 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -80,15 +78,14 @@ CONFIG_SATA_FSL=y CONFIG_SATA_SIL24=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_FS_ENET=y +CONFIG_FSL_PQ_MDIO=y +CONFIG_E1000E=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_FS_ENET=y -CONFIG_E1000E=y -CONFIG_FSL_PQ_MDIO=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -98,16 +95,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_QE=m -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y +CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_SOUND=y @@ -123,7 +119,6 @@ CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set @@ -150,22 +145,15 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_FRAME_WARN=8092 CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index cbb98c1234f..f085699dab7 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -6,8 +6,8 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y -CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -21,23 +21,22 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P2041_RDB=y CONFIG_P3041_DS=y CONFIG_P4080_DS=y CONFIG_P5020_DS=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_KEXEC=y CONFIG_IRQ_ALL_CPUS=y CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_FSL_LBC=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y # CONFIG_PCIEASPM is not set +CONFIG_PCI_MSI=y CONFIG_RAPIDIO=y CONFIG_FSL_RIO=y CONFIG_NET=y @@ -77,17 +76,14 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND_FSL_IFC=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -115,11 +111,9 @@ CONFIG_SERIO_LIBPS2=y CONFIG_PPC_EPAPR_HV_BYTECHAN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -132,7 +126,6 @@ CONFIG_SPI_FSL_ESPI=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB_HID=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -142,8 +135,6 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_OF=y -CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y @@ -170,19 +161,16 @@ CONFIG_HUGETLBFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_RCU_TRACE=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD4=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 5aac9a8bc53..e116dc9e8a2 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -2,12 +2,12 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_PPC_CHRP is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_83xx=y @@ -25,7 +25,6 @@ CONFIG_ASP834x=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_MATH_EMULATION=y -CONFIG_SPARSE_IRQ=y CONFIG_PCI=y CONFIG_NET=y CONFIG_PACKET=y @@ -44,8 +43,6 @@ CONFIG_INET_ESP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -64,15 +61,14 @@ CONFIG_ATA=y CONFIG_SATA_FSL=y CONFIG_SATA_SIL=y CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_UCC_GETH=y +CONFIG_GIANFAR=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_VITESSE_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_GIANFAR=y -CONFIG_UCC_GETH=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -112,17 +108,12 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_CRC_T10DIF=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 99a4dd3b30c..a036a622be5 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -5,7 +5,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -17,6 +19,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -40,8 +44,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_FORCE_MAX_ZONEORDER=12 @@ -78,32 +80,20 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -135,7 +125,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -184,7 +173,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -230,18 +218,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index fdfa84dc908..4ba5255232b 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -7,7 +7,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -19,6 +21,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -42,8 +46,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IRQ_ALL_CPUS=y @@ -81,32 +83,20 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -137,7 +127,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -186,7 +175,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -232,18 +220,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y -- cgit v1.2.3-70-g09d2 From 1267643dc311e860e728dbd09a97c2e0a773bfdb Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 22 Aug 2012 13:43:30 -0500 Subject: powerpc/fsl: fix "Failed to mount /dev: No such device" errors Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot, at least over nfs, with: Failed to mount /dev: No such device Configuring DEVTMPFS fixes it. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/p1023rds_defconfig | 1 + arch/powerpc/configs/corenet32_smp_defconfig | 1 + arch/powerpc/configs/corenet64_smp_defconfig | 1 + arch/powerpc/configs/mpc83xx_defconfig | 1 + arch/powerpc/configs/mpc85xx_defconfig | 1 + arch/powerpc/configs/mpc85xx_smp_defconfig | 1 + 6 files changed, 6 insertions(+) diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index a79b0a9316a..26e541c4662 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -62,6 +62,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index f085699dab7..8b3d57c1ebe 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -69,6 +69,7 @@ CONFIG_INET_IPCOMP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index dd89de8b0b7..0516e22ca3d 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -56,6 +56,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index e116dc9e8a2..9352e4430c3 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -41,6 +41,7 @@ CONFIG_INET_ESP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FW_LOADER is not set CONFIG_MTD=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index a036a622be5..8b5bda27d24 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -76,6 +76,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 4ba5255232b..b0974e7e98a 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -79,6 +79,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y -- cgit v1.2.3-70-g09d2 From 0b9e3f6d84ce619f697bb622d9165cccaa93d67c Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 31 Jul 2012 14:55:51 +1000 Subject: xfs: fix uninitialised variable in xfs_rtbuf_get() Results in this assert failure in generic/090: XFS: Assertion failed: *nmap >= 1, file: fs/xfs/xfs_bmap.c, line: 4363 ..... Call Trace: [] xfs_bmapi_read+0x6b/0x370 [] xfs_rtbuf_get+0x42/0x130 [] xfs_rtget_summary+0x89/0x120 [] xfs_rtallocate_extent_size+0xce/0x340 [] xfs_rtallocate_extent+0x240/0x290 [] xfs_bmap_rtalloc+0x1ba/0x340 [] xfs_bmap_alloc+0x35/0x40 [] xfs_bmapi_allocate+0xf1/0x350 [] xfs_bmapi_write+0x66e/0xa60 [] xfs_iomap_write_direct+0x22a/0x3f0 [] __xfs_get_blocks+0x38b/0x5d0 [] xfs_get_blocks_direct+0x14/0x20 [] do_blockdev_direct_IO+0xf71/0x1eb0 [] __blockdev_direct_IO+0x55/0x60 [] xfs_vm_direct_IO+0x11a/0x1e0 [] generic_file_direct_write+0xd7/0x1b0 [] xfs_file_dio_aio_write+0x13c/0x320 [] xfs_file_aio_write+0x1c2/0x1d0 [] do_sync_write+0xa7/0xe0 [] vfs_write+0xa8/0x160 [] sys_pwrite64+0x92/0xb0 [] system_call_fastpath+0x16/0x1b Signed-off-by: Dave Chinner Signed-off-by: Ben Myers --- fs/xfs/xfs_rtalloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c index 92d4331cd4f..ca28a4ba4b5 100644 --- a/fs/xfs/xfs_rtalloc.c +++ b/fs/xfs/xfs_rtalloc.c @@ -857,7 +857,7 @@ xfs_rtbuf_get( xfs_buf_t *bp; /* block buffer, result */ xfs_inode_t *ip; /* bitmap or summary inode */ xfs_bmbt_irec_t map; - int nmap; + int nmap = 1; int error; /* error value */ ip = issum ? mp->m_rsumip : mp->m_rbmip; -- cgit v1.2.3-70-g09d2 From 761290309939743ddf97e2bd94c6da18c6436b79 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 7 Aug 2012 02:02:02 -0400 Subject: xfs: unlock the AGI buffer when looping in xfs_dialloc Also update some commens in the area to make the code easier to read. Signed-off-by: Christoph Hellwig Reviewed-by: Mark Tinguely Reviewed-by: Dave Chinner Signed-off-by: Ben Myers --- fs/xfs/xfs_ialloc.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index 21e37b55f7e..5aceb3f8ecd 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -962,23 +962,22 @@ xfs_dialloc( if (!pag->pagi_freecount && !okalloc) goto nextag; + /* + * Then read in the AGI buffer and recheck with the AGI buffer + * lock held. + */ error = xfs_ialloc_read_agi(mp, tp, agno, &agbp); if (error) goto out_error; - /* - * Once the AGI has been read in we have to recheck - * pagi_freecount with the AGI buffer lock held. - */ if (pag->pagi_freecount) { xfs_perag_put(pag); goto out_alloc; } - if (!okalloc) { - xfs_trans_brelse(tp, agbp); - goto nextag; - } + if (!okalloc) + goto nextag_relse_buffer; + error = xfs_ialloc_ag_alloc(tp, agbp, &ialloced); if (error) { @@ -1007,6 +1006,8 @@ xfs_dialloc( return 0; } +nextag_relse_buffer: + xfs_trans_brelse(tp, agbp); nextag: xfs_perag_put(pag); if (++agno == mp->m_sb.sb_agcount) -- cgit v1.2.3-70-g09d2 From a672e1be30d5bc848cd0067c55ed29b2015b7c17 Mon Sep 17 00:00:00 2001 From: Tomas Racek Date: Tue, 14 Aug 2012 10:35:04 +0200 Subject: xfs: check for possible overflow in xfs_ioc_trim If range.start or range.minlen is bigger than filesystem size, return invalid value error. This fixes possible overflow in BTOBB macro when passed value was nearly ULLONG_MAX. Signed-off-by: Tomas Racek Reviewed-by: Dave Chinner Signed-off-by: Ben Myers --- fs/xfs/xfs_discard.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_discard.c b/fs/xfs/xfs_discard.c index f9c3fe304a1..69cf4fcde03 100644 --- a/fs/xfs/xfs_discard.c +++ b/fs/xfs/xfs_discard.c @@ -179,12 +179,14 @@ xfs_ioc_trim( * used by the fstrim application. In the end it really doesn't * matter as trimming blocks is an advisory interface. */ + if (range.start >= XFS_FSB_TO_B(mp, mp->m_sb.sb_dblocks) || + range.minlen > XFS_FSB_TO_B(mp, XFS_ALLOC_AG_MAX_USABLE(mp))) + return -XFS_ERROR(EINVAL); + start = BTOBB(range.start); end = start + BTOBBT(range.len) - 1; minlen = BTOBB(max_t(u64, granularity, range.minlen)); - if (XFS_BB_TO_FSB(mp, start) >= mp->m_sb.sb_dblocks) - return -XFS_ERROR(EINVAL); if (end > XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks) - 1) end = XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)- 1; -- cgit v1.2.3-70-g09d2 From 22f5d115a2b087c977128f84ee557ad71530330e Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 14 Aug 2012 10:53:38 +0000 Subject: drm: Initialize object type when using DRM_MODE() macro MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DRM_MODE() macro doesn't initialize the type of the base drm object. When a copy is made of the mode, the object type is overwritten with zero, and the the object can no longer be found by drm_mode_object_find() due to the type check failing. Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie --- include/drm/drm_crtc.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index ced362533e3..bfacf0d5a22 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -118,7 +118,8 @@ enum drm_mode_status { .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \ .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \ .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \ - .vscan = (vs), .flags = (f), .vrefresh = 0 + .vscan = (vs), .flags = (f), .vrefresh = 0, \ + .base.type = DRM_MODE_OBJECT_MODE #define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */ -- cgit v1.2.3-70-g09d2 From 7c4eaca4162d0b5ad4fb39f974d7ffd71b9daa09 Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Thu, 16 Aug 2012 08:29:03 +0000 Subject: drm: Check for invalid cursor flags Signed-off-by: Jakob Bornecrantz Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 2 +- include/drm/drm_mode.h | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 08a7aa722d6..6fbfc244748 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1981,7 +1981,7 @@ int drm_mode_cursor_ioctl(struct drm_device *dev, if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EINVAL; - if (!req->flags) + if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags)) return -EINVAL; mutex_lock(&dev->mode_config.mutex); diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h index 5581980b14f..3d6301b6ec1 100644 --- a/include/drm/drm_mode.h +++ b/include/drm/drm_mode.h @@ -359,8 +359,9 @@ struct drm_mode_mode_cmd { struct drm_mode_modeinfo mode; }; -#define DRM_MODE_CURSOR_BO (1<<0) -#define DRM_MODE_CURSOR_MOVE (1<<1) +#define DRM_MODE_CURSOR_BO 0x01 +#define DRM_MODE_CURSOR_MOVE 0x02 +#define DRM_MODE_CURSOR_FLAGS 0x03 /* * depending on the value in flags different members are used. -- cgit v1.2.3-70-g09d2 From 9a0f938bde74bf9e50bd75c8de9e38c1787398cd Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 24 Aug 2012 09:12:22 +0100 Subject: drm/i915: Use the correct size of the GTT for placing the per-process entries The current layout is to place the per-process tables at the end of the GTT. However, this is currently using a hardcoded maximum size for the GTT and not taking in account limitations imposed by the BIOS. Use the value for the total number of entries allocated in the table as provided by the configuration registers. Reported-by: Matthew Garrett Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Ben Widawsky Cc: Matthew Garret Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index d9a5372ec56..60815b861ec 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -72,7 +72,7 @@ int i915_gem_init_aliasing_ppgtt(struct drm_device *dev) /* ppgtt PDEs reside in the global gtt pagetable, which has 512*1024 * entries. For aliasing ppgtt support we just steal them at the end for * now. */ - first_pd_entry_in_global_pt = 512*1024 - I915_PPGTT_PD_ENTRIES; + first_pd_entry_in_global_pt = dev_priv->mm.gtt->gtt_total_entries - I915_PPGTT_PD_ENTRIES; ppgtt = kzalloc(sizeof(*ppgtt), GFP_KERNEL); if (!ppgtt) -- cgit v1.2.3-70-g09d2 From ca5dd3954a62dc14c2afff1c34b3b5d8dc74f777 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Aug 2012 22:09:12 +0000 Subject: powerpc: Fix xmon dl command for new printk implementation Since the printk internals were reworked the xmon 'dl' command which dumps the content of __log_buf has stopped working. It is now a structured buffer, so just dumping it doesn't really work. Use the helpers added for kgdb to print out the content. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/xmon/xmon.c | 36 ++++++++++-------------------------- 1 file changed, 10 insertions(+), 26 deletions(-) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index eab3492a45c..013f2866878 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -2148,40 +2149,23 @@ print_address(unsigned long addr) void dump_log_buf(void) { - const unsigned long size = 128; - unsigned long end, addr; - unsigned char buf[size + 1]; - - addr = 0; - buf[size] = '\0'; + struct kmsg_dumper dumper = { .active = 1 }; + unsigned char buf[128]; + size_t len; if (setjmp(bus_error_jmp) != 0) { - printf("Unable to lookup symbol __log_buf!\n"); + printf("Error dumping printk buffer!\n"); return; } catch_memory_errors = 1; sync(); - addr = kallsyms_lookup_name("__log_buf"); - - if (! addr) - printf("Symbol __log_buf not found!\n"); - else { - end = addr + (1 << CONFIG_LOG_BUF_SHIFT); - while (addr < end) { - if (! mread(addr, buf, size)) { - printf("Can't read memory at address 0x%lx\n", addr); - break; - } - - printf("%s", buf); - if (strlen(buf) < size) - break; - - addr += size; - } - } + kmsg_dump_rewind_nolock(&dumper); + while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { + buf[len] = '\0'; + printf("%s", buf); + } sync(); /* wait a little while to see if we get a machine check */ -- cgit v1.2.3-70-g09d2 From e3bc8049e524f13e09a58f5bad70b6738494277a Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Aug 2012 22:09:13 +0000 Subject: powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/xmon/xmon.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 013f2866878..9b49c65ee7a 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -895,13 +895,13 @@ cmds(struct pt_regs *excp) #endif default: printf("Unrecognized command: "); - do { + do { if (' ' < cmd && cmd <= '~') putchar(cmd); else printf("\\x%x", cmd); cmd = inchar(); - } while (cmd != '\n'); + } while (cmd != '\n'); printf(" (type ? for help)\n"); break; } @@ -1098,7 +1098,7 @@ static long check_bp_loc(unsigned long addr) return 1; } -static char *breakpoint_help_string = +static char *breakpoint_help_string = "Breakpoint command usage:\n" "b show breakpoints\n" "b [cnt] set breakpoint at given instr addr\n" @@ -1194,7 +1194,7 @@ bpt_cmds(void) default: termch = cmd; - cmd = skipbl(); + cmd = skipbl(); if (cmd == '?') { printf(breakpoint_help_string); break; @@ -1360,7 +1360,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr, sp + REGS_OFFSET); break; } - printf("--- Exception: %lx %s at ", regs.trap, + printf("--- Exception: %lx %s at ", regs.trap, getvecname(TRAP(®s))); pc = regs.nip; lr = regs.link; @@ -1624,14 +1624,14 @@ static void super_regs(void) cmd = skipbl(); if (cmd == '\n') { - unsigned long sp, toc; + unsigned long sp, toc; asm("mr %0,1" : "=r" (sp) :); asm("mr %0,2" : "=r" (toc) :); printf("msr = "REG" sprg0= "REG"\n", mfmsr(), mfspr(SPRN_SPRG0)); printf("pvr = "REG" sprg1= "REG"\n", - mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); + mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); printf("dec = "REG" sprg2= "REG"\n", mfspr(SPRN_DEC), mfspr(SPRN_SPRG2)); printf("sp = "REG" sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3)); @@ -1784,7 +1784,7 @@ byterev(unsigned char *val, int size) static int brev; static int mnoread; -static char *memex_help_string = +static char *memex_help_string = "Memory examine command usage:\n" "m [addr] [flags] examine/change memory\n" " addr is optional. will start where left off.\n" @@ -1799,7 +1799,7 @@ static char *memex_help_string = "NOTE: flags are saved as defaults\n" ""; -static char *memex_subcmd_help_string = +static char *memex_subcmd_help_string = "Memory examine subcommands:\n" " hexval write this val to current location\n" " 'string' write chars from string to this location\n" @@ -2065,7 +2065,7 @@ prdump(unsigned long adrs, long ndump) nr = mread(adrs, temp, r); adrs += nr; for (m = 0; m < r; ++m) { - if ((m & (sizeof(long) - 1)) == 0 && m > 0) + if ((m & (sizeof(long) - 1)) == 0 && m > 0) putchar(' '); if (m < nr) printf("%.2x", temp[m]); @@ -2073,7 +2073,7 @@ prdump(unsigned long adrs, long ndump) printf("%s", fault_chars[fault_type]); } for (; m < 16; ++m) { - if ((m & (sizeof(long) - 1)) == 0) + if ((m & (sizeof(long) - 1)) == 0) putchar(' '); printf(" "); } @@ -2153,13 +2153,13 @@ dump_log_buf(void) unsigned char buf[128]; size_t len; - if (setjmp(bus_error_jmp) != 0) { + if (setjmp(bus_error_jmp) != 0) { printf("Error dumping printk buffer!\n"); - return; - } + return; + } - catch_memory_errors = 1; - sync(); + catch_memory_errors = 1; + sync(); kmsg_dump_rewind_nolock(&dumper); while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { @@ -2167,10 +2167,10 @@ dump_log_buf(void) printf("%s", buf); } - sync(); - /* wait a little while to see if we get a machine check */ - __delay(200); - catch_memory_errors = 0; + sync(); + /* wait a little while to see if we get a machine check */ + __delay(200); + catch_memory_errors = 0; } /* -- cgit v1.2.3-70-g09d2 From 6d9c00c67b4768105e8ae3d213484095c744eea8 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 22 Aug 2012 20:30:43 +0000 Subject: powerpc: Fix null pointer deref in perf hardware breakpoints Currently if you are doing a global perf recording with hardware breakpoints (ie perf record -e mem:0xdeadbeef -a), you can oops with: Faulting instruction address: 0xc000000000738890 cpu 0xc: Vector: 300 (Data Access) at [c0000003f76af8d0] pc: c000000000738890: .hw_breakpoint_handler+0xa0/0x1e0 lr: c000000000738830: .hw_breakpoint_handler+0x40/0x1e0 sp: c0000003f76afb50 msr: 8000000000001032 dar: 6f0 dsisr: 42000000 current = 0xc0000003f765ac00 paca = 0xc00000000f262a00 softe: 0 irq_happened: 0x01 pid = 6810, comm = loop-read enter ? for help [c0000003f76afbe0] c00000000073cd04 .notifier_call_chain.isra.0+0x84/0xe0 [c0000003f76afc80] c00000000073cdbc .notify_die+0x3c/0x60 [c0000003f76afd20] c0000000000139f0 .do_dabr+0x40/0xf0 [c0000003f76afe30] c000000000005a9c handle_dabr_fault+0x14/0x48 --- Exception: 300 (Data Access) at 0000000010000480 SP (ff8679e0) is in userspace This is because we don't check to see if the break point is associated with task before we deference the task_struct pointer. This changes the update to use current. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/hw_breakpoint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index f3a82dde61d..956a4c496de 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -253,7 +253,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { - bp->ctx->task->thread.last_hit_ubp = bp; + current->thread.last_hit_ubp = bp; regs->msr |= MSR_SE; goto out; } -- cgit v1.2.3-70-g09d2 From 46c5c59e6902855b61a31be1b8e26bfffcae1e07 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 22 Aug 2012 15:35:47 +0000 Subject: powerpc/mpic_msgr: Add missing includes Add several #includes that mpic_msgr relies on being pulled implicitly, which only happens on certain configs. Signed-off-by: Scott Wood Cc: Meador Inge Cc: Jia Hongtao Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mpic_msgr.h | 1 + arch/powerpc/sysdev/mpic_msgr.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h index 326d33ca55c..d4f471fb103 100644 --- a/arch/powerpc/include/asm/mpic_msgr.h +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -14,6 +14,7 @@ #include #include #include +#include struct mpic_msgr { u32 __iomem *base; diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 483d8fa72e8..e961f8c4a8f 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -14,6 +14,9 @@ #include #include #include +#include +#include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 572b411cb4f1b208bb8ea278752f956b3554371e Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:18 +0000 Subject: powerpc/kgdb: Do not set kgdb_single_step on ppc The kgdb_single_step flag has the possibility to indefinitely hang the system on an SMP system. The x86 arch have the same problem, and that problem was fixed by commit 8097551d9ab9b9e3630(kgdb,x86: do not set kgdb_single_step on x86). This patch does the same behaviors as x86's patch. Signed-off-by: Dongdong Deng Signed-off-by: Jason Wessel Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 782bd0a3c2f..bbabc5abb1c 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -410,7 +410,6 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, #else linux_regs->msr |= MSR_SE; #endif - kgdb_single_step = 1; atomic_set(&kgdb_cpu_doing_single_step, raw_smp_processor_id()); } -- cgit v1.2.3-70-g09d2 From 949616cf2d3095d1bb6b3d155c1cc963abd98b5c Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:19 +0000 Subject: powerpc/kgdb: Bail out of KGDB when we've been triggered We need to skip a breakpoint exception when it occurs after a breakpoint has already been removed. Signed-off-by: Tiejun Chen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index bbabc5abb1c..05adb69febf 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -101,6 +101,21 @@ static int computeSignal(unsigned int tt) return SIGHUP; /* default for things we don't know about */ } +/** + * + * kgdb_skipexception - Bail out of KGDB when we've been triggered. + * @exception: Exception vector number + * @regs: Current &struct pt_regs. + * + * On some architectures we need to skip a breakpoint exception when + * it occurs after a breakpoint has been removed. + * + */ +int kgdb_skipexception(int exception, struct pt_regs *regs) +{ + return kgdb_isremovedbreak(regs->nip); +} + static int kgdb_call_nmi_hook(struct pt_regs *regs) { kgdb_nmicallback(raw_smp_processor_id(), regs); -- cgit v1.2.3-70-g09d2 From 5f630401f9e98bd062733b5bbef096dbf2158066 Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:20 +0000 Subject: powerpc/kgdb: Restore current_thread_info properly For powerpc BooKE and e200, singlestep is handled on the critical/dbg exception stack. This causes current_thread_info() to fail for kgdb internal, so previously We work around this issue by copying the thread_info from the kernel stack before calling kgdb_handle_exception, and copying it back afterwards. But actually we don't do this properly. We should backup current_thread_info then restore that when exit. Signed-off-by: Tiejun Chen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 05adb69febf..c470a40b29f 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -25,6 +25,7 @@ #include #include #include +#include /* * This table contains the mapping between PowerPC hardware trap types, and @@ -153,6 +154,8 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs) static int kgdb_singlestep(struct pt_regs *regs) { struct thread_info *thread_info, *exception_thread_info; + struct thread_info *backup_current_thread_info = \ + (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL); if (user_mode(regs)) return 0; @@ -170,13 +173,17 @@ static int kgdb_singlestep(struct pt_regs *regs) thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1)); exception_thread_info = current_thread_info(); - if (thread_info != exception_thread_info) + if (thread_info != exception_thread_info) { + /* Save the original current_thread_info. */ + memcpy(backup_current_thread_info, exception_thread_info, sizeof *thread_info); memcpy(exception_thread_info, thread_info, sizeof *thread_info); + } kgdb_handle_exception(0, SIGTRAP, 0, regs); if (thread_info != exception_thread_info) - memcpy(thread_info, exception_thread_info, sizeof *thread_info); + /* Restore current_thread_info lastly. */ + memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info); return 1; } -- cgit v1.2.3-70-g09d2 From f0f0c9ac2051e5da4afa1f3f908ace197a4de80e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 21 Aug 2012 21:22:22 +0000 Subject: powerpc: Remove unnecessary ifdefs Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/cputable.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 50d82c8a037..b3c083de17a 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -553,9 +553,7 @@ static inline int cpu_has_feature(unsigned long feature) & feature); } -#ifdef CONFIG_HAVE_HW_BREAKPOINT #define HBP_NUM 1 -#endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif /* !__ASSEMBLY__ */ -- cgit v1.2.3-70-g09d2 From 4c374af5fdee4bc6b4f5ea96c1a0f0ad7d3566be Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sat, 18 Aug 2012 07:34:15 +0000 Subject: powerpc/dma-iommu: Fix IOMMU window check Checking for device mask to cover the whole IOMMU table is too strict. IOMMU allocators should handle mask constraint properly for each allocation. The patch enables to use old AirPort Extreme cards on PowerMacs with more than 1GB of memory; without the patch the driver init fails with: b43-pci-bridge 0001:01:01.0: Warning: IOMMU window too big for device mask b43-pci-bridge 0001:01:01.0: mask: 0x3fffffff, table end: 0x80000000 b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask Signed-off-by: Aaro Koskinen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/dma-iommu.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 2d7bb8ced13..e4897523de4 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -83,11 +83,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 0; } - if ((tbl->it_offset + tbl->it_size) > (mask >> IOMMU_PAGE_SHIFT)) { - dev_info(dev, "Warning: IOMMU window too big for device mask\n"); - dev_info(dev, "mask: 0x%08llx, table end: 0x%08lx\n", - mask, (tbl->it_offset + tbl->it_size) << - IOMMU_PAGE_SHIFT); + if (tbl->it_offset > (mask >> IOMMU_PAGE_SHIFT)) { + dev_info(dev, "Warning: IOMMU offset too big for device mask\n"); + dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n", + mask, tbl->it_offset << IOMMU_PAGE_SHIFT); return 0; } else return 1; -- cgit v1.2.3-70-g09d2 From 7256a5d2da56f2ea8ad49e8dbe9e2984f0899b42 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 13 Aug 2012 03:18:28 +0000 Subject: powerpc: Fix personality handling in ppc64_personality() Directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. Directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Use personality() macro to compare only PER_MASK bytes and make sure that we are setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by: Jiri Kosina Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/syscalls.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index f2496f2faec..4e3cc47f26b 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -107,11 +107,11 @@ long ppc64_personality(unsigned long personality) long ret; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret = (ret & ~PER_MASK) | PER_LINUX; return ret; } #endif -- cgit v1.2.3-70-g09d2 From dad477ccd65f05bf3b5a874e0118bf4156a1fcbb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 7 Aug 2012 17:50:46 +0000 Subject: powerpc: POWER7 copy_to_user/copy_from_user patch applied twice "powerpc: Use enhanced touch instructions in POWER7 copy_to_user/copy_from_user" was applied twice. Remove one. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copyuser_power7.S | 31 ------------------------------- 1 file changed, 31 deletions(-) diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index f9ede7c6606..4a4a46fbad0 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -316,37 +316,6 @@ err1; stb r0,0(r3) lis r8,0x8000 /* GO=1 */ clrldi r8,r8,32 -.machine push -.machine "power4" - dcbt r0,r6,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 - eieio - dcbt r0,r8,0b01010 /* GO */ -.machine pop - - /* - * We prefetch both the source and destination using enhanced touch - * instructions. We use a stream ID of 0 for the load side and - * 1 for the store side. - */ - clrrdi r6,r4,7 - clrrdi r9,r3,7 - ori r9,r9,1 /* stream=1 */ - - srdi r7,r5,7 /* length in cachelines, capped at 0x3FF */ - cmpldi cr1,r7,0x3FF - ble cr1,1f - li r7,0x3FF -1: lis r0,0x0E00 /* depth=7 */ - sldi r7,r7,7 - or r7,r7,r0 - ori r10,r7,1 /* stream=1 */ - - lis r8,0x8000 /* GO=1 */ - clrldi r8,r8,32 - .machine push .machine "power4" dcbt r0,r6,0b01000 -- cgit v1.2.3-70-g09d2 From 2fae7cdb60240e2e2d9b378afbf6d9fcce8a3890 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 7 Aug 2012 17:51:41 +0000 Subject: powerpc: Fix VMX in interrupt check in POWER7 copy loops The enhanced prefetch hint patches corrupt the condition register that was used to check if we are in interrupt. Fix this by using cr1. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copyuser_power7.S | 4 ++-- arch/powerpc/lib/memcpy_power7.S | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index 4a4a46fbad0..0d24ff15f5f 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -288,7 +288,7 @@ err1; stb r0,0(r3) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_usercopy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -326,7 +326,7 @@ err1; stb r0,0(r3) dcbt r0,r8,0b01010 /* GO */ .machine pop - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S index 0efdc51bc71..7ba6c96de77 100644 --- a/arch/powerpc/lib/memcpy_power7.S +++ b/arch/powerpc/lib/memcpy_power7.S @@ -222,7 +222,7 @@ _GLOBAL(memcpy_power7) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_copy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -260,7 +260,7 @@ _GLOBAL(memcpy_power7) dcbt r0,r8,0b01010 /* GO */ .machine pop - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a -- cgit v1.2.3-70-g09d2 From 813312110bede27bffd082c25cd31730bd567beb Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Tue, 7 Aug 2012 15:07:19 +0000 Subject: powerpc/perf: Use pmc_overflow() to detect rolled back events For certain speculative events on Power7, 'perf stat' reports far higher event count than 'perf record' for the same event. As described in following commit, a performance monitor exception is raised even when the the performance events are rolled back. commit 0837e3242c73566fc1c0196b4ec61779c25ffc93 Author: Anton Blanchard Date: Wed Mar 9 14:38:42 2011 +1100 perf_event_interrupt() records an event only when an overflow occurs. But this check for overflow is a simple 'if (val < 0)'. Because the events are rolled back, this check for overflow fails and the event is not recorded. perf_event_interrupt() later uses pmc_overflow() to detect the overflow and resets the counters and the events are lost completely. To properly detect the overflow of rolled back events, use pmc_overflow() even when recording events. To reproduce: $ cat strcpy.c #include #include main() { char buf[256]; alarm(5); while(1) strcpy(buf, "string1"); } $ perf record -e r20014 ./strcpy $ perf report -n > report.1 $ perf stat -e r20014 > report.2 # Compare report.1 and report.2 Reported-by: Maynard Johnson Signed-off-by: Sukadev Bhattiprolu Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 77b49ddda9d..7cd2dbd6e4c 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1431,7 +1431,7 @@ static void perf_event_interrupt(struct pt_regs *regs) if (!event->hw.idx || is_limited_pmc(event->hw.idx)) continue; val = read_pmc(event->hw.idx); - if ((int)val < 0) { + if (pmc_overflow(val)) { /* event has overflowed */ found = 1; record_and_restart(event, val, regs); -- cgit v1.2.3-70-g09d2 From 2c39bf49fd05305bea6d70670855047b2191d3f5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 24 Aug 2012 20:55:55 +1000 Subject: Revert "powerpc: Update g5_defconfig" This reverts commit b1acf1bb544cf28c1f4be0a45620fa899c74b7e9. Something went horribly wrong when I did savedefconfig, not sure what, but what's in there is busted so let's revert it. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/g5_defconfig | 103 +++++++++++++++++++++++++++----------- 1 file changed, 73 insertions(+), 30 deletions(-) diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 15130066e5e..07b7f2af2dc 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,8 +1,10 @@ +CONFIG_PPC64=y +CONFIG_ALTIVEC=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y @@ -13,15 +15,16 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_SMP=y -CONFIG_NR_CPUS=4 -CONFIG_KEXEC=y -# CONFIG_RELOCATABLE is not set +# CONFIG_PPC_PSERIES is not set CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_PMAC64=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_MIGRATION is not set CONFIG_PCI_MSI=y CONFIG_NET=y CONFIG_PACKET=y @@ -49,6 +52,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y @@ -56,6 +60,8 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_CDROM_PKTCDVD=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -79,24 +85,33 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m -CONFIG_MACINTOSH_DRIVERS=y +CONFIG_IEEE1394=y +CONFIG_IEEE1394_OHCI1394=y +CONFIG_IEEE1394_SBP2=m +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y +CONFIG_WINDFARM_PM121=y CONFIG_NETDEVICES=y -CONFIG_BONDING=m CONFIG_DUMMY=m -CONFIG_MII=y +CONFIG_BONDING=m CONFIG_TUN=m +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SUNGEM=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_TIGON3=y CONFIG_E1000=y -CONFIG_SUNGEM=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m +CONFIG_TIGON3=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -106,24 +121,36 @@ CONFIG_USB_USBNET=m # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_PPP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y CONFIG_RAW_DRIVER=y CONFIG_I2C_CHARDEV=y # CONFIG_HWMON is not set -CONFIG_AGP=y -CONFIG_DRM=y -CONFIG_DRM_NOUVEAU=y +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_TILEBLITTING=y +CONFIG_FB_OF=y +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y CONFIG_FB_RADEON=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m @@ -131,7 +158,15 @@ CONFIG_SND_SEQUENCER=m CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_POWERMAC=m +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m CONFIG_SND_USB_AUDIO=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y CONFIG_HID_GYRATION=y CONFIG_LOGITECH_FF=y CONFIG_HID_PANTHERLORD=y @@ -139,12 +174,13 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y CONFIG_USB=y +CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y @@ -208,6 +244,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y +CONFIG_INOTIFY=y +CONFIG_AUTOFS_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y @@ -221,12 +259,14 @@ CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFSD=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_1250=y CONFIG_NLS_CODEPAGE_1251=y @@ -234,23 +274,29 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y +CONFIG_CRC_T10DIF=y +CONFIG_LIBCRC32C=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_STRICT_DEVMEM=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_BOOTX_TEXT=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m @@ -260,6 +306,3 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_VIRTUALIZATION is not set -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=m -- cgit v1.2.3-70-g09d2 From a51d4ed01e5bb39d2cf36a12f9976ab08872c192 Mon Sep 17 00:00:00 2001 From: Calvin Walton Date: Fri, 24 Aug 2012 07:56:31 -0400 Subject: i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard This board is incorrectly detected as having an LVDS connector, resulting in the VGA output (the only available output on the board) showing the console only in the top-left 1024x768 pixels, and an extra LVDS connector appearing in X. It's a desktop Mini-ITX board using an Atom D525 CPU with an NM10 chipset. I've had this board for about a year, but this is the first time I noticed the issue because I've been running it headless for most of its life. Signed-off-by: Calvin Walton --- drivers/gpu/drm/i915/intel_lvds.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index e05c0d3e344..e9a6f6aaed8 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -780,6 +780,14 @@ static const struct dmi_system_id intel_no_lvds[] = { DMI_MATCH(DMI_BOARD_NAME, "ZBOXSD-ID12/ID13"), }, }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Gigabyte GA-D525TUD", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "D525TUD"), + }, + }, { } /* terminating entry */ }; -- cgit v1.2.3-70-g09d2 From d17d794c63e2dc0a5b1ffc8367c9475880427fc7 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 23 Aug 2012 15:11:52 -0400 Subject: libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entry commit d70e551c8e1ecb6f20422f8db6bfe6a0049edcb8, Add " 2GB ATA Flash Disk"/"ADMA428M" to DMA blacklist, should have added a space before 2GB. Signed-off-by: Prarit Bhargava Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 5eee1c1537d..8e1039c8e15 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4062,7 +4062,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA }, { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, - { "2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA }, + { " 2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA }, /* Odd clown on sil3726/4726 PMPs */ { "Config Disk", NULL, ATA_HORKAGE_DISABLE }, -- cgit v1.2.3-70-g09d2 From 760a9a30adc558a75916a13902f38c6792fa8c4b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 22 Aug 2012 14:34:11 +0100 Subject: kvm: Fix nonsense handling of compat ioctl KVM_SET_SIGNAL_MASK passed a NULL argument leaves the on stack signal sets uninitialized. It then passes them through to kvm_vcpu_ioctl_set_sigmask. We should be passing a NULL in this case not translated garbage. Signed-off-by: Alan Cox Signed-off-by: Marcelo Tosatti --- virt/kvm/kvm_main.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 246852397e3..d617f69131d 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1976,9 +1976,10 @@ static long kvm_vcpu_compat_ioctl(struct file *filp, if (copy_from_user(&csigset, sigmask_arg->sigset, sizeof csigset)) goto out; - } - sigset_from_compat(&sigset, &csigset); - r = kvm_vcpu_ioctl_set_sigmask(vcpu, &sigset); + sigset_from_compat(&sigset, &csigset); + r = kvm_vcpu_ioctl_set_sigmask(vcpu, &sigset); + } else + r = kvm_vcpu_ioctl_set_sigmask(vcpu, NULL); break; } default: -- cgit v1.2.3-70-g09d2 From 1d92128fe9e30c2340283361957a840f108e4abf Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 26 Aug 2012 18:00:29 +0300 Subject: KVM: x86: fix KVM_GET_MSR for PV EOI KVM_GET_MSR was missing support for PV EOI, which is needed for migration. Signed-off-by: Michael S. Tsirkin Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index dce75b76031..148ed666e31 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2000,6 +2000,9 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) case MSR_KVM_STEAL_TIME: data = vcpu->arch.st.msr_val; break; + case MSR_KVM_PV_EOI_EN: + data = vcpu->arch.pv_eoi.msr_val; + break; case MSR_IA32_P5_MC_ADDR: case MSR_IA32_P5_MC_TYPE: case MSR_IA32_MCG_CAP: -- cgit v1.2.3-70-g09d2 From 6b79d14e7a9f5d31b78bcd01a122f0c692e94a19 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 27 Aug 2012 10:59:42 +0200 Subject: s390/dasd: fix ioctl return value For unimplemented ioctls the dasd driver should return -ENOTTY. Reported-by: Wanlong Gao Acked-by: Stefan Weinhuber Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_eckd.c | 2 +- drivers/s390/block/dasd_ioctl.c | 7 ++----- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 40a826a7295..2fb2b9ea97e 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -3804,7 +3804,7 @@ dasd_eckd_ioctl(struct dasd_block *block, unsigned int cmd, void __user *argp) case BIODASDSYMMIO: return dasd_symm_io(device, argp); default: - return -ENOIOCTLCMD; + return -ENOTTY; } } diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index cceae70279f..654c6921a6d 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -498,12 +498,9 @@ int dasd_ioctl(struct block_device *bdev, fmode_t mode, break; default: /* if the discipline has an ioctl method try it. */ - if (base->discipline->ioctl) { + rc = -ENOTTY; + if (base->discipline->ioctl) rc = base->discipline->ioctl(block, cmd, argp); - if (rc == -ENOIOCTLCMD) - rc = -EINVAL; - } else - rc = -EINVAL; } dasd_put_device(base); return rc; -- cgit v1.2.3-70-g09d2 From 29a877fa1f402ce2c1a0c52957c4e29b9bb34216 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 27 Aug 2012 15:18:45 +0200 Subject: s390/smp: add missing smp_store_status() for !SMP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix this compile error: arch/s390/kernel/machine_kexec.c: In function ‘setup_regs’: arch/s390/kernel/machine_kexec.c:63:3: error: implicit declaration of function ‘smp_store_status’ [-Werror=implicit-function-declaration] Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/smp.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index a0a8340daaf..ce26ac3cb16 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -44,6 +44,7 @@ static inline void smp_call_online_cpu(void (*func)(void *), void *data) } static inline int smp_find_processor_id(int address) { return 0; } +static inline int smp_store_status(int cpu) { return 0; } static inline int smp_vcpu_scheduled(int cpu) { return 1; } static inline void smp_yield_cpu(int cpu) { } static inline void smp_yield(void) { } -- cgit v1.2.3-70-g09d2 From aa2ffd06168e25689e0eb9662bf4595ba2bbac14 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Thu, 26 Jul 2012 03:40:35 -0600 Subject: Btrfs: fix a misplaced address operator in a condition This should obviously not be "if (&flag)" but "if (flag)". Signed-off-by: Stefan Behrens --- fs/btrfs/locking.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/locking.c b/fs/btrfs/locking.c index a44eff07480..2a1762c6604 100644 --- a/fs/btrfs/locking.c +++ b/fs/btrfs/locking.c @@ -67,7 +67,7 @@ void btrfs_clear_lock_blocking_rw(struct extent_buffer *eb, int rw) { if (eb->lock_nested) { read_lock(&eb->lock); - if (&eb->lock_nested && current->pid == eb->lock_owner) { + if (eb->lock_nested && current->pid == eb->lock_owner) { read_unlock(&eb->lock); return; } -- cgit v1.2.3-70-g09d2 From 5986802c2fcc754040bb7ed95f30bb16c4a843b7 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 30 Jul 2012 02:16:10 -0600 Subject: Btrfs: fix some error codes in btrfs_qgroup_inherit() These are returning zero when it should be returning a negative error code. Signed-off-by: Dan Carpenter --- fs/btrfs/qgroup.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index bc424ae5a81..229ef8927e6 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1369,8 +1369,10 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, if (srcid) { srcgroup = find_qgroup_rb(fs_info, srcid); - if (!srcgroup) + if (!srcgroup) { + ret = -EINVAL; goto unlock; + } dstgroup->rfer = srcgroup->rfer - level_size; dstgroup->rfer_cmpr = srcgroup->rfer_cmpr - level_size; srcgroup->excl = level_size; @@ -1379,8 +1381,10 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, qgroup_dirty(fs_info, srcgroup); } - if (!inherit) + if (!inherit) { + ret = -EINVAL; goto unlock; + } i_qgroups = (u64 *)(inherit + 1); for (i = 0; i < inherit->num_qgroups; ++i) { -- cgit v1.2.3-70-g09d2 From 57a5a882031dba5cb7bc7ebc955b897498365fe2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 30 Jul 2012 02:15:43 -0600 Subject: Btrfs: checking for NULL instead of IS_ERR add_qgroup_rb() never returns NULL, only error pointers. Signed-off-by: Dan Carpenter --- fs/btrfs/qgroup.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 229ef8927e6..38b42e7bc91 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1364,8 +1364,10 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, spin_lock(&fs_info->qgroup_lock); dstgroup = add_qgroup_rb(fs_info, objectid); - if (!dstgroup) + if (IS_ERR(dstgroup)) { + ret = PTR_ERR(dstgroup); goto unlock; + } if (srcid) { srcgroup = find_qgroup_rb(fs_info, srcid); -- cgit v1.2.3-70-g09d2 From 55e591ffde38e0088b022129e035e18a8d04c7e6 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 30 Jul 2012 02:15:15 -0600 Subject: Btrfs: unlock on error in btrfs_delalloc_reserve_metadata() We should release this mutex before returning the error code. Signed-off-by: Dan Carpenter --- fs/btrfs/extent-tree.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 4e1b153b7c4..45c69c4184c 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4571,8 +4571,10 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) if (root->fs_info->quota_enabled) { ret = btrfs_qgroup_reserve(root, num_bytes + nr_extents * root->leafsize); - if (ret) + if (ret) { + mutex_unlock(&BTRFS_I(inode)->delalloc_mutex); return ret; + } } ret = reserve_metadata_bytes(root, block_rsv, to_reserve, flush); -- cgit v1.2.3-70-g09d2 From dadd1105ca9a1e506c678e8e410e9623efdda821 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 30 Jul 2012 02:10:44 -0600 Subject: Btrfs: fix some endian bugs handling the root times "trans->transid" is cpu endian but we want to store the data as little endian. "item->ctime.nsec" is only 32 bits, not 64. Signed-off-by: Dan Carpenter --- fs/btrfs/ioctl.c | 2 +- fs/btrfs/root-tree.c | 4 ++-- fs/btrfs/transaction.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 43f0012016e..a1fbca0a100 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -424,7 +424,7 @@ static noinline int create_subvol(struct btrfs_root *root, uuid_le_gen(&new_uuid); memcpy(root_item.uuid, new_uuid.b, BTRFS_UUID_SIZE); root_item.otime.sec = cpu_to_le64(cur_time.tv_sec); - root_item.otime.nsec = cpu_to_le64(cur_time.tv_nsec); + root_item.otime.nsec = cpu_to_le32(cur_time.tv_nsec); root_item.ctime = root_item.otime; btrfs_set_root_ctransid(&root_item, trans->transid); btrfs_set_root_otransid(&root_item, trans->transid); diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c index 6bb465cca20..10d8e4d8807 100644 --- a/fs/btrfs/root-tree.c +++ b/fs/btrfs/root-tree.c @@ -544,8 +544,8 @@ void btrfs_update_root_times(struct btrfs_trans_handle *trans, struct timespec ct = CURRENT_TIME; spin_lock(&root->root_times_lock); - item->ctransid = trans->transid; + item->ctransid = cpu_to_le64(trans->transid); item->ctime.sec = cpu_to_le64(ct.tv_sec); - item->ctime.nsec = cpu_to_le64(ct.tv_nsec); + item->ctime.nsec = cpu_to_le32(ct.tv_nsec); spin_unlock(&root->root_times_lock); } diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 7ac7cdcc294..7208ada41e0 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1061,7 +1061,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, memcpy(new_root_item->parent_uuid, root->root_item.uuid, BTRFS_UUID_SIZE); new_root_item->otime.sec = cpu_to_le64(cur_time.tv_sec); - new_root_item->otime.nsec = cpu_to_le64(cur_time.tv_nsec); + new_root_item->otime.nsec = cpu_to_le32(cur_time.tv_nsec); btrfs_set_root_otransid(new_root_item, trans->transid); memset(&new_root_item->stime, 0, sizeof(new_root_item->stime)); memset(&new_root_item->rtime, 0, sizeof(new_root_item->rtime)); -- cgit v1.2.3-70-g09d2 From eb838e73dc2121d2bae47d5678952cd7d48793b5 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 31 Jul 2012 16:28:48 -0400 Subject: Btrfs: lock extents as we map them in DIO A deadlock in xfstests 113 was uncovered by commit d187663ef24cd3d033f0cbf2867e70b36a3a90b8 This is because we would not return EIOCBQUEUED for short AIO reads, instead we'd wait for the DIO to complete and then return the amount of data we transferred, which would allow our stuff to unlock the remaning amount. But with this change this no longer happens, so if we have a short AIO read (for example if we try to read past EOF), we could leave the section from EOF to the end of where we tried to read locked. Fixing this is tricky since there is no clear way to know exactly how much data DIO truly submitted for IO, so to make this less hard on ourselves and less combersome we need to lock the extents as we try to map them, and then we unlock any areas we didn't actually map. This makes us completely safe from deadlocks and reliance on a particular behavior of the DIO code. This also lays the groundwork for allowing us to use the normal csum storage method for reads which means we can remove an allocation. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 256 +++++++++++++++++++++++++++---------------------------- 1 file changed, 127 insertions(+), 129 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index dac1fc21d80..09182449cbd 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5773,18 +5773,109 @@ out: return ret; } +static int lock_extent_direct(struct inode *inode, u64 lockstart, u64 lockend, + struct extent_state **cached_state, int writing) +{ + struct btrfs_ordered_extent *ordered; + int ret = 0; + + while (1) { + lock_extent_bits(&BTRFS_I(inode)->io_tree, lockstart, lockend, + 0, cached_state); + /* + * We're concerned with the entire range that we're going to be + * doing DIO to, so we need to make sure theres no ordered + * extents in this range. + */ + ordered = btrfs_lookup_ordered_range(inode, lockstart, + lockend - lockstart + 1); + + /* + * We need to make sure there are no buffered pages in this + * range either, we could have raced between the invalidate in + * generic_file_direct_write and locking the extent. The + * invalidate needs to happen so that reads after a write do not + * get stale data. + */ + if (!ordered && (!writing || + !test_range_bit(&BTRFS_I(inode)->io_tree, + lockstart, lockend, EXTENT_UPTODATE, 0, + *cached_state))) + break; + + unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend, + cached_state, GFP_NOFS); + + if (ordered) { + btrfs_start_ordered_extent(inode, ordered, 1); + btrfs_put_ordered_extent(ordered); + } else { + /* Screw you mmap */ + ret = filemap_write_and_wait_range(inode->i_mapping, + lockstart, + lockend); + if (ret) + break; + + /* + * If we found a page that couldn't be invalidated just + * fall back to buffered. + */ + ret = invalidate_inode_pages2_range(inode->i_mapping, + lockstart >> PAGE_CACHE_SHIFT, + lockend >> PAGE_CACHE_SHIFT); + if (ret) + break; + } + + cond_resched(); + } + + return ret; +} + static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create) { struct extent_map *em; struct btrfs_root *root = BTRFS_I(inode)->root; + struct extent_state *cached_state = NULL; u64 start = iblock << inode->i_blkbits; + u64 lockstart, lockend; u64 len = bh_result->b_size; struct btrfs_trans_handle *trans; + int unlock_bits = EXTENT_LOCKED; + int ret; + + lockstart = start; + lockend = start + len - 1; + if (create) { + ret = btrfs_delalloc_reserve_space(inode, len); + if (ret) + return ret; + unlock_bits |= EXTENT_DELALLOC | EXTENT_DIRTY; + } + + /* + * If this errors out it's because we couldn't invalidate pagecache for + * this range and we need to fallback to buffered. + */ + if (lock_extent_direct(inode, lockstart, lockend, &cached_state, create)) + return -ENOTBLK; + + if (create) { + ret = set_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, + lockend, EXTENT_DELALLOC, NULL, + &cached_state, GFP_NOFS); + if (ret) + goto unlock_err; + } em = btrfs_get_extent(inode, NULL, 0, start, len, 0); - if (IS_ERR(em)) - return PTR_ERR(em); + if (IS_ERR(em)) { + ret = PTR_ERR(em); + goto unlock_err; + } /* * Ok for INLINE and COMPRESSED extents we need to fallback on buffered @@ -5803,17 +5894,16 @@ static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags) || em->block_start == EXTENT_MAP_INLINE) { free_extent_map(em); - return -ENOTBLK; + ret = -ENOTBLK; + goto unlock_err; } /* Just a good old fashioned hole, return */ if (!create && (em->block_start == EXTENT_MAP_HOLE || test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) { free_extent_map(em); - /* DIO will do one hole at a time, so just unlock a sector */ - unlock_extent(&BTRFS_I(inode)->io_tree, start, - start + root->sectorsize - 1); - return 0; + ret = 0; + goto unlock_err; } /* @@ -5826,8 +5916,9 @@ static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, * */ if (!create) { - len = em->len - (start - em->start); - goto map; + len = min(len, em->len - (start - em->start)); + lockstart = start + len; + goto unlock; } if (test_bit(EXTENT_FLAG_PREALLOC, &em->flags) || @@ -5859,7 +5950,7 @@ static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, btrfs_end_transaction(trans, root); if (ret) { free_extent_map(em); - return ret; + goto unlock_err; } goto unlock; } @@ -5872,14 +5963,12 @@ must_cow: */ len = bh_result->b_size; em = btrfs_new_extent_direct(inode, em, start, len); - if (IS_ERR(em)) - return PTR_ERR(em); + if (IS_ERR(em)) { + ret = PTR_ERR(em); + goto unlock_err; + } len = min(len, em->len - (start - em->start)); unlock: - clear_extent_bit(&BTRFS_I(inode)->io_tree, start, start + len - 1, - EXTENT_LOCKED | EXTENT_DELALLOC | EXTENT_DIRTY, 1, - 0, NULL, GFP_NOFS); -map: bh_result->b_blocknr = (em->block_start + (start - em->start)) >> inode->i_blkbits; bh_result->b_size = len; @@ -5897,9 +5986,28 @@ map: i_size_write(inode, start + len); } + /* + * In the case of write we need to clear and unlock the entire range, + * in the case of read we need to unlock only the end area that we + * aren't using if there is any left over space. + */ + if (lockstart < lockend) + clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, lockend, + unlock_bits, 1, 0, &cached_state, GFP_NOFS); + else + free_extent_state(cached_state); + free_extent_map(em); return 0; + +unlock_err: + if (create) + unlock_bits |= EXTENT_DO_ACCOUNTING; + + clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, lockend, + unlock_bits, 1, 0, &cached_state, GFP_NOFS); + return ret; } struct btrfs_dio_private { @@ -6340,132 +6448,22 @@ static ssize_t check_direct_IO(struct btrfs_root *root, int rw, struct kiocb *io out: return retval; } + static ssize_t btrfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t offset, unsigned long nr_segs) { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; - struct btrfs_ordered_extent *ordered; - struct extent_state *cached_state = NULL; - u64 lockstart, lockend; - ssize_t ret; - int writing = rw & WRITE; - int write_bits = 0; - size_t count = iov_length(iov, nr_segs); if (check_direct_IO(BTRFS_I(inode)->root, rw, iocb, iov, - offset, nr_segs)) { + offset, nr_segs)) return 0; - } - - lockstart = offset; - lockend = offset + count - 1; - - if (writing) { - ret = btrfs_delalloc_reserve_space(inode, count); - if (ret) - goto out; - } - while (1) { - lock_extent_bits(&BTRFS_I(inode)->io_tree, lockstart, lockend, - 0, &cached_state); - /* - * We're concerned with the entire range that we're going to be - * doing DIO to, so we need to make sure theres no ordered - * extents in this range. - */ - ordered = btrfs_lookup_ordered_range(inode, lockstart, - lockend - lockstart + 1); - - /* - * We need to make sure there are no buffered pages in this - * range either, we could have raced between the invalidate in - * generic_file_direct_write and locking the extent. The - * invalidate needs to happen so that reads after a write do not - * get stale data. - */ - if (!ordered && (!writing || - !test_range_bit(&BTRFS_I(inode)->io_tree, - lockstart, lockend, EXTENT_UPTODATE, 0, - cached_state))) - break; - - unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend, - &cached_state, GFP_NOFS); - - if (ordered) { - btrfs_start_ordered_extent(inode, ordered, 1); - btrfs_put_ordered_extent(ordered); - } else { - /* Screw you mmap */ - ret = filemap_write_and_wait_range(file->f_mapping, - lockstart, - lockend); - if (ret) - goto out; - - /* - * If we found a page that couldn't be invalidated just - * fall back to buffered. - */ - ret = invalidate_inode_pages2_range(file->f_mapping, - lockstart >> PAGE_CACHE_SHIFT, - lockend >> PAGE_CACHE_SHIFT); - if (ret) { - if (ret == -EBUSY) - ret = 0; - goto out; - } - } - - cond_resched(); - } - - /* - * we don't use btrfs_set_extent_delalloc because we don't want - * the dirty or uptodate bits - */ - if (writing) { - write_bits = EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING; - ret = set_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, lockend, - EXTENT_DELALLOC, NULL, &cached_state, - GFP_NOFS); - if (ret) { - clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, - lockend, EXTENT_LOCKED | write_bits, - 1, 0, &cached_state, GFP_NOFS); - goto out; - } - } - - free_extent_state(cached_state); - cached_state = NULL; - - ret = __blockdev_direct_IO(rw, iocb, inode, + return __blockdev_direct_IO(rw, iocb, inode, BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev, iov, offset, nr_segs, btrfs_get_blocks_direct, NULL, btrfs_submit_direct, 0); - - if (ret < 0 && ret != -EIOCBQUEUED) { - clear_extent_bit(&BTRFS_I(inode)->io_tree, offset, - offset + iov_length(iov, nr_segs) - 1, - EXTENT_LOCKED | write_bits, 1, 0, - &cached_state, GFP_NOFS); - } else if (ret >= 0 && ret < iov_length(iov, nr_segs)) { - /* - * We're falling back to buffered, unlock the section we didn't - * do IO on. - */ - clear_extent_bit(&BTRFS_I(inode)->io_tree, offset + ret, - offset + iov_length(iov, nr_segs) - 1, - EXTENT_LOCKED | write_bits, 1, 0, - &cached_state, GFP_NOFS); - } -out: - free_extent_state(cached_state); - return ret; } static int btrfs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, -- cgit v1.2.3-70-g09d2 From 3627bf4503b504077332c13496cb1bd54713bcbb Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Wed, 1 Aug 2012 04:28:01 -0600 Subject: Btrfs: fix that error value is changed by mistake In iterate_inodes_from_logical() the error result from extent_from_logical() is patched by mistake. Typically ENOENT is patched to EINVAL because (-ENOENT & BTRFS_EXTENT_FLAG_TREE_BLOCK) evaluates to true. Signed-off-by: Stefan Behrens --- fs/btrfs/backref.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index a256f3b2a84..ff6475f409d 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -1438,10 +1438,10 @@ int iterate_inodes_from_logical(u64 logical, struct btrfs_fs_info *fs_info, ret = extent_from_logical(fs_info, logical, path, &found_key); btrfs_release_path(path); - if (ret & BTRFS_EXTENT_FLAG_TREE_BLOCK) - ret = -EINVAL; if (ret < 0) return ret; + if (ret & BTRFS_EXTENT_FLAG_TREE_BLOCK) + return -EINVAL; extent_item_pos = logical - found_key.objectid; ret = iterate_extent_inodes(fs_info, found_key.objectid, -- cgit v1.2.3-70-g09d2 From aa9ddcd4b5557102fa25695c11904f249b4dec49 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 2 Aug 2012 10:22:20 -0400 Subject: Btrfs: do not use missing devices when showing devname If you do the following mkfs.btrfs /dev/sdb /dev/sdc rmmod btrfs dd if=/dev/zero of=/dev/sdb bs=1M count=1 mount -o degraded /dev/sdc /mnt/btrfs-test the box will panic trying to deref the name for the missing dev since it is the lower numbered devid. So fix show_devname to not use missing devices. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 75ee2c7791f..2e06f124f28 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1505,6 +1505,8 @@ static int btrfs_show_devname(struct seq_file *m, struct dentry *root) while (cur_devices) { head = &cur_devices->devices; list_for_each_entry(dev, head, dev_list) { + if (dev->missing) + continue; if (!first_dev || dev->devid < first_dev->devid) first_dev = dev; } -- cgit v1.2.3-70-g09d2 From 99f5944b8477914406173b47b4f261356286730b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 2 Aug 2012 10:23:59 -0400 Subject: Btrfs: do not strdup non existent strings When we close devices we add back empty devices for some reason that escapes me. In the case of a missing dev we don't allocate an rcu_string for it's name, so check to see if the device has a name and if it doesn't don't bother strdup()'ing it. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/volumes.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index b8708f994e6..3b394503bd4 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -569,9 +569,11 @@ static int __btrfs_close_devices(struct btrfs_fs_devices *fs_devices) memcpy(new_device, device, sizeof(*new_device)); /* Safe because we are under uuid_mutex */ - name = rcu_string_strdup(device->name->str, GFP_NOFS); - BUG_ON(device->name && !name); /* -ENOMEM */ - rcu_assign_pointer(new_device->name, name); + if (device->name) { + name = rcu_string_strdup(device->name->str, GFP_NOFS); + BUG_ON(device->name && !name); /* -ENOMEM */ + rcu_assign_pointer(new_device->name, name); + } new_device->bdev = NULL; new_device->writeable = 0; new_device->in_fs_metadata = 0; -- cgit v1.2.3-70-g09d2 From c329861da40623cd838b8c9ee31a850242fd88cf Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 3 Aug 2012 16:49:19 -0400 Subject: Btrfs: don't allocate a seperate csums array for direct reads We've been allocating a big array for csums instead of storing them in the io_tree like we do for buffered reads because previously we were locking the entire range, so we didn't have an extent state for each sector of the range. But now that we do the range locking as we map the buffers we can limit the mapping lenght to sectorsize and use the private part of the io_tree for our csums. This allows us to avoid an extra memory allocation for direct reads which could incur latency. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/ctree.h | 2 +- fs/btrfs/file-item.c | 4 ++-- fs/btrfs/inode.c | 45 ++++++++++++++++----------------------------- 3 files changed, 19 insertions(+), 32 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index adb1cd7ceb9..348196350bf 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -3192,7 +3192,7 @@ int btrfs_del_csums(struct btrfs_trans_handle *trans, int btrfs_lookup_bio_sums(struct btrfs_root *root, struct inode *inode, struct bio *bio, u32 *dst); int btrfs_lookup_bio_sums_dio(struct btrfs_root *root, struct inode *inode, - struct bio *bio, u64 logical_offset, u32 *dst); + struct bio *bio, u64 logical_offset); int btrfs_insert_file_extent(struct btrfs_trans_handle *trans, struct btrfs_root *root, u64 objectid, u64 pos, diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index b45b9de0c21..857d93cd01d 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -272,9 +272,9 @@ int btrfs_lookup_bio_sums(struct btrfs_root *root, struct inode *inode, } int btrfs_lookup_bio_sums_dio(struct btrfs_root *root, struct inode *inode, - struct bio *bio, u64 offset, u32 *dst) + struct bio *bio, u64 offset) { - return __btrfs_lookup_bio_sums(root, inode, bio, offset, dst, 1); + return __btrfs_lookup_bio_sums(root, inode, bio, offset, NULL, 1); } int btrfs_lookup_csums_range(struct btrfs_root *root, u64 start, u64 end, diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 09182449cbd..2d65c52b094 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5847,15 +5847,18 @@ static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, int unlock_bits = EXTENT_LOCKED; int ret; - lockstart = start; - lockend = start + len - 1; if (create) { ret = btrfs_delalloc_reserve_space(inode, len); if (ret) return ret; unlock_bits |= EXTENT_DELALLOC | EXTENT_DIRTY; + } else { + len = min_t(u64, len, root->sectorsize); } + lockstart = start; + lockend = start + len - 1; + /* * If this errors out it's because we couldn't invalidate pagecache for * this range and we need to fallback to buffered. @@ -6015,7 +6018,6 @@ struct btrfs_dio_private { u64 logical_offset; u64 disk_bytenr; u64 bytes; - u32 *csums; void *private; /* number of bios pending for this dio */ @@ -6035,7 +6037,6 @@ static void btrfs_endio_direct_read(struct bio *bio, int err) struct inode *inode = dip->inode; struct btrfs_root *root = BTRFS_I(inode)->root; u64 start; - u32 *private = dip->csums; start = dip->logical_offset; do { @@ -6043,8 +6044,12 @@ static void btrfs_endio_direct_read(struct bio *bio, int err) struct page *page = bvec->bv_page; char *kaddr; u32 csum = ~(u32)0; + u64 private = ~(u32)0; unsigned long flags; + if (get_state_private(&BTRFS_I(inode)->io_tree, + start, &private)) + goto failed; local_irq_save(flags); kaddr = kmap_atomic(page); csum = btrfs_csum_data(root, kaddr + bvec->bv_offset, @@ -6054,18 +6059,18 @@ static void btrfs_endio_direct_read(struct bio *bio, int err) local_irq_restore(flags); flush_dcache_page(bvec->bv_page); - if (csum != *private) { + if (csum != private) { +failed: printk(KERN_ERR "btrfs csum failed ino %llu off" " %llu csum %u private %u\n", (unsigned long long)btrfs_ino(inode), (unsigned long long)start, - csum, *private); + csum, (unsigned)private); err = -EIO; } } start += bvec->bv_len; - private++; bvec++; } while (bvec <= bvec_end); @@ -6073,7 +6078,6 @@ static void btrfs_endio_direct_read(struct bio *bio, int err) dip->logical_offset + dip->bytes - 1); bio->bi_private = dip->private; - kfree(dip->csums); kfree(dip); /* If we had a csum failure make sure to clear the uptodate flag */ @@ -6179,7 +6183,7 @@ static struct bio *btrfs_dio_bio_alloc(struct block_device *bdev, static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode, int rw, u64 file_offset, int skip_sum, - u32 *csums, int async_submit) + int async_submit) { int write = rw & REQ_WRITE; struct btrfs_root *root = BTRFS_I(inode)->root; @@ -6212,8 +6216,7 @@ static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode, if (ret) goto err; } else if (!skip_sum) { - ret = btrfs_lookup_bio_sums_dio(root, inode, bio, - file_offset, csums); + ret = btrfs_lookup_bio_sums_dio(root, inode, bio, file_offset); if (ret) goto err; } @@ -6239,10 +6242,8 @@ static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip, u64 submit_len = 0; u64 map_length; int nr_pages = 0; - u32 *csums = dip->csums; int ret = 0; int async_submit = 0; - int write = rw & REQ_WRITE; map_length = orig_bio->bi_size; ret = btrfs_map_block(map_tree, READ, start_sector << 9, @@ -6278,16 +6279,13 @@ static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip, atomic_inc(&dip->pending_bios); ret = __btrfs_submit_dio_bio(bio, inode, rw, file_offset, skip_sum, - csums, async_submit); + async_submit); if (ret) { bio_put(bio); atomic_dec(&dip->pending_bios); goto out_err; } - /* Write's use the ordered csums */ - if (!write && !skip_sum) - csums = csums + nr_pages; start_sector += submit_len >> 9; file_offset += submit_len; @@ -6317,7 +6315,7 @@ static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip, submit: ret = __btrfs_submit_dio_bio(bio, inode, rw, file_offset, skip_sum, - csums, async_submit); + async_submit); if (!ret) return 0; @@ -6353,17 +6351,6 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode, ret = -ENOMEM; goto free_ordered; } - dip->csums = NULL; - - /* Write's use the ordered csum stuff, so we don't need dip->csums */ - if (!write && !skip_sum) { - dip->csums = kmalloc(sizeof(u32) * bio->bi_vcnt, GFP_NOFS); - if (!dip->csums) { - kfree(dip); - ret = -ENOMEM; - goto free_ordered; - } - } dip->private = bio->bi_private; dip->inode = inode; -- cgit v1.2.3-70-g09d2 From 6209526531e70c080f79318ab8f50e26846c40a8 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Sat, 4 Aug 2012 01:45:02 -0600 Subject: btrfs: fix second lock in btrfs_delete_delayed_items() Fix a real bug caught by coccinelle. fs/btrfs/delayed-inode.c:1013:1-11: second lock on line 1013 Signed-off-by: Fengguang Wu --- fs/btrfs/delayed-inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 335605c8cea..00deed4ef3e 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -1028,9 +1028,10 @@ do_again: btrfs_release_delayed_item(prev); ret = 0; btrfs_release_path(path); - if (curr) + if (curr) { + mutex_unlock(&node->mutex); goto do_again; - else + } else goto delete_fail; } -- cgit v1.2.3-70-g09d2 From 1fa11e265fa2562fb713171b6a58e72bb7afd276 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Mon, 6 Aug 2012 14:18:51 -0600 Subject: Btrfs: fix deadlock in wait_for_more_refs Commit a168650c introduced a waiting mechanism to prevent busy waiting in btrfs_run_delayed_refs. This can deadlock with btrfs_run_ordered_operations, where a tree_mod_seq is held while waiting for the io to complete, while the end_io calls btrfs_run_delayed_refs. This whole mechanism is unnecessary. If not enough runnable refs are available to satisfy count, just return as count is more like a guideline than a strict requirement. In case we have to run all refs, commit transaction makes sure that no other threads are working in the transaction anymore, so we just assert here that no refs are blocked. Signed-off-by: Arne Jansen Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 6 ---- fs/btrfs/ctree.h | 1 - fs/btrfs/delayed-ref.c | 8 ------ fs/btrfs/disk-io.c | 2 -- fs/btrfs/extent-tree.c | 77 ++++++++++++++------------------------------------ 5 files changed, 21 insertions(+), 73 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 9d7621f271f..08e0b11ba0a 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -420,12 +420,6 @@ void btrfs_put_tree_mod_seq(struct btrfs_fs_info *fs_info, } spin_unlock(&fs_info->tree_mod_seq_lock); - /* - * we removed the lowest blocker from the blocker list, so there may be - * more processible delayed refs. - */ - wake_up(&fs_info->tree_mod_seq_wait); - /* * anything that's lower than the lowest existing (read: blocked) * sequence number can be removed from the tree. diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 348196350bf..c38734a07a6 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1252,7 +1252,6 @@ struct btrfs_fs_info { atomic_t tree_mod_seq; struct list_head tree_mod_seq_list; struct seq_list tree_mod_seq_elem; - wait_queue_head_t tree_mod_seq_wait; /* this protects tree_mod_log */ rwlock_t tree_mod_log_lock; diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c index da7419ed01b..7561431af50 100644 --- a/fs/btrfs/delayed-ref.c +++ b/fs/btrfs/delayed-ref.c @@ -662,9 +662,6 @@ int btrfs_add_delayed_tree_ref(struct btrfs_fs_info *fs_info, add_delayed_tree_ref(fs_info, trans, &ref->node, bytenr, num_bytes, parent, ref_root, level, action, for_cow); - if (!need_ref_seq(for_cow, ref_root) && - waitqueue_active(&fs_info->tree_mod_seq_wait)) - wake_up(&fs_info->tree_mod_seq_wait); spin_unlock(&delayed_refs->lock); if (need_ref_seq(for_cow, ref_root)) btrfs_qgroup_record_ref(trans, &ref->node, extent_op); @@ -713,9 +710,6 @@ int btrfs_add_delayed_data_ref(struct btrfs_fs_info *fs_info, add_delayed_data_ref(fs_info, trans, &ref->node, bytenr, num_bytes, parent, ref_root, owner, offset, action, for_cow); - if (!need_ref_seq(for_cow, ref_root) && - waitqueue_active(&fs_info->tree_mod_seq_wait)) - wake_up(&fs_info->tree_mod_seq_wait); spin_unlock(&delayed_refs->lock); if (need_ref_seq(for_cow, ref_root)) btrfs_qgroup_record_ref(trans, &ref->node, extent_op); @@ -744,8 +738,6 @@ int btrfs_add_delayed_extent_op(struct btrfs_fs_info *fs_info, num_bytes, BTRFS_UPDATE_DELAYED_HEAD, extent_op->is_data); - if (waitqueue_active(&fs_info->tree_mod_seq_wait)) - wake_up(&fs_info->tree_mod_seq_wait); spin_unlock(&delayed_refs->lock); return 0; } diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 502b20c56e8..a7ad8fc8dc5 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2035,8 +2035,6 @@ int open_ctree(struct super_block *sb, fs_info->free_chunk_space = 0; fs_info->tree_mod_log = RB_ROOT; - init_waitqueue_head(&fs_info->tree_mod_seq_wait); - /* readahead state */ INIT_RADIX_TREE(&fs_info->reada_tree, GFP_NOFS & ~__GFP_WAIT); spin_lock_init(&fs_info->reada_lock); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 45c69c4184c..d3df65f83b5 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2318,12 +2318,6 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans, ref->in_tree = 0; rb_erase(&ref->rb_node, &delayed_refs->root); delayed_refs->num_entries--; - /* - * we modified num_entries, but as we're currently running - * delayed refs, skip - * wake_up(&delayed_refs->seq_wait); - * here. - */ spin_unlock(&delayed_refs->lock); ret = run_one_delayed_ref(trans, root, ref, extent_op, @@ -2350,22 +2344,6 @@ next: return count; } -static void wait_for_more_refs(struct btrfs_fs_info *fs_info, - struct btrfs_delayed_ref_root *delayed_refs, - unsigned long num_refs, - struct list_head *first_seq) -{ - spin_unlock(&delayed_refs->lock); - pr_debug("waiting for more refs (num %ld, first %p)\n", - num_refs, first_seq); - wait_event(fs_info->tree_mod_seq_wait, - num_refs != delayed_refs->num_entries || - fs_info->tree_mod_seq_list.next != first_seq); - pr_debug("done waiting for more refs (num %ld, first %p)\n", - delayed_refs->num_entries, fs_info->tree_mod_seq_list.next); - spin_lock(&delayed_refs->lock); -} - #ifdef SCRAMBLE_DELAYED_REFS /* * Normally delayed refs get processed in ascending bytenr order. This @@ -2460,13 +2438,11 @@ int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans, struct btrfs_delayed_ref_root *delayed_refs; struct btrfs_delayed_ref_node *ref; struct list_head cluster; - struct list_head *first_seq = NULL; int ret; u64 delayed_start; int run_all = count == (unsigned long)-1; int run_most = 0; - unsigned long num_refs = 0; - int consider_waiting; + int loops; /* We'll clean this up in btrfs_cleanup_transaction */ if (trans->aborted) @@ -2484,7 +2460,7 @@ int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans, delayed_refs = &trans->transaction->delayed_refs; INIT_LIST_HEAD(&cluster); again: - consider_waiting = 0; + loops = 0; spin_lock(&delayed_refs->lock); #ifdef SCRAMBLE_DELAYED_REFS @@ -2512,31 +2488,6 @@ again: if (ret) break; - if (delayed_start >= delayed_refs->run_delayed_start) { - if (consider_waiting == 0) { - /* - * btrfs_find_ref_cluster looped. let's do one - * more cycle. if we don't run any delayed ref - * during that cycle (because we can't because - * all of them are blocked) and if the number of - * refs doesn't change, we avoid busy waiting. - */ - consider_waiting = 1; - num_refs = delayed_refs->num_entries; - first_seq = root->fs_info->tree_mod_seq_list.next; - } else { - wait_for_more_refs(root->fs_info, delayed_refs, - num_refs, first_seq); - /* - * after waiting, things have changed. we - * dropped the lock and someone else might have - * run some refs, built new clusters and so on. - * therefore, we restart staleness detection. - */ - consider_waiting = 0; - } - } - ret = run_clustered_refs(trans, root, &cluster); if (ret < 0) { spin_unlock(&delayed_refs->lock); @@ -2549,9 +2500,26 @@ again: if (count == 0) break; - if (ret || delayed_refs->run_delayed_start == 0) { + if (delayed_start >= delayed_refs->run_delayed_start) { + if (loops == 0) { + /* + * btrfs_find_ref_cluster looped. let's do one + * more cycle. if we don't run any delayed ref + * during that cycle (because we can't because + * all of them are blocked), bail out. + */ + loops = 1; + } else { + /* + * no runnable refs left, stop trying + */ + BUG_ON(run_all); + break; + } + } + if (ret) { /* refs were run, let's reset staleness detection */ - consider_waiting = 0; + loops = 0; } } @@ -5296,9 +5264,6 @@ static noinline int check_ref_cleanup(struct btrfs_trans_handle *trans, rb_erase(&head->node.rb_node, &delayed_refs->root); delayed_refs->num_entries--; - smp_mb(); - if (waitqueue_active(&root->fs_info->tree_mod_seq_wait)) - wake_up(&root->fs_info->tree_mod_seq_wait); /* * we don't take a ref on the node because we're removing it from the -- cgit v1.2.3-70-g09d2 From 66657b318e0e443ada229fccd40c8be86cfebdbf Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 1 Aug 2012 15:36:24 -0400 Subject: Btrfs: barrier before waitqueue_active We need a barrir before calling waitqueue_active otherwise we will miss wakeups. So in places that do atomic_dec(); then atomic_read() use atomic_dec_return() which imply a memory barrier (see memory-barriers.txt) and then add an explicit memory barrier everywhere else that need them. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/compression.c | 1 + fs/btrfs/delayed-inode.c | 7 +++---- fs/btrfs/disk-io.c | 7 ++++--- fs/btrfs/inode.c | 4 +--- fs/btrfs/volumes.c | 3 +-- 5 files changed, 10 insertions(+), 12 deletions(-) diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c index 86eff48dab7..43d1c5a3a03 100644 --- a/fs/btrfs/compression.c +++ b/fs/btrfs/compression.c @@ -818,6 +818,7 @@ static void free_workspace(int type, struct list_head *workspace) btrfs_compress_op[idx]->free_workspace(workspace); atomic_dec(alloc_workspace); wake: + smp_mb(); if (waitqueue_active(workspace_wait)) wake_up(workspace_wait); } diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 00deed4ef3e..07d5eeb1e6f 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -512,8 +512,8 @@ static void __btrfs_remove_delayed_item(struct btrfs_delayed_item *delayed_item) rb_erase(&delayed_item->rb_node, root); delayed_item->delayed_node->count--; - atomic_dec(&delayed_root->items); - if (atomic_read(&delayed_root->items) < BTRFS_DELAYED_BACKGROUND && + if (atomic_dec_return(&delayed_root->items) < + BTRFS_DELAYED_BACKGROUND && waitqueue_active(&delayed_root->wait)) wake_up(&delayed_root->wait); } @@ -1056,8 +1056,7 @@ static void btrfs_release_delayed_inode(struct btrfs_delayed_node *delayed_node) delayed_node->count--; delayed_root = delayed_node->root->fs_info->delayed_root; - atomic_dec(&delayed_root->items); - if (atomic_read(&delayed_root->items) < + if (atomic_dec_return(&delayed_root->items) < BTRFS_DELAYED_BACKGROUND && waitqueue_active(&delayed_root->wait)) wake_up(&delayed_root->wait); diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index a7ad8fc8dc5..dd86a5d8842 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -754,9 +754,7 @@ static void run_one_async_done(struct btrfs_work *work) limit = btrfs_async_submit_limit(fs_info); limit = limit * 2 / 3; - atomic_dec(&fs_info->nr_async_submits); - - if (atomic_read(&fs_info->nr_async_submits) < limit && + if (atomic_dec_return(&fs_info->nr_async_submits) < limit && waitqueue_active(&fs_info->async_submit_wait)) wake_up(&fs_info->async_submit_wait); @@ -3783,14 +3781,17 @@ int btrfs_cleanup_transaction(struct btrfs_root *root) /* FIXME: cleanup wait for commit */ t->in_commit = 1; t->blocked = 1; + smp_mb(); if (waitqueue_active(&root->fs_info->transaction_blocked_wait)) wake_up(&root->fs_info->transaction_blocked_wait); t->blocked = 0; + smp_mb(); if (waitqueue_active(&root->fs_info->transaction_wait)) wake_up(&root->fs_info->transaction_wait); t->commit_done = 1; + smp_mb(); if (waitqueue_active(&t->commit_wait)) wake_up(&t->commit_wait); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 2d65c52b094..97baf00b40d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1007,9 +1007,7 @@ static noinline void async_cow_submit(struct btrfs_work *work) nr_pages = (async_cow->end - async_cow->start + PAGE_CACHE_SIZE) >> PAGE_CACHE_SHIFT; - atomic_sub(nr_pages, &root->fs_info->async_delalloc_pages); - - if (atomic_read(&root->fs_info->async_delalloc_pages) < + if (atomic_sub_return(nr_pages, &root->fs_info->async_delalloc_pages) < 5 * 1024 * 1024 && waitqueue_active(&root->fs_info->async_submit_wait)) wake_up(&root->fs_info->async_submit_wait); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 3b394503bd4..0b1e69d380d 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -227,9 +227,8 @@ loop_lock: cur = pending; pending = pending->bi_next; cur->bi_next = NULL; - atomic_dec(&fs_info->nr_async_bios); - if (atomic_read(&fs_info->nr_async_bios) < limit && + if (atomic_dec_return(&fs_info->nr_async_bios) < limit && waitqueue_active(&fs_info->async_submit_wait)) wake_up(&fs_info->async_submit_wait); -- cgit v1.2.3-70-g09d2 From 6fc823b10f333313deb0b5d9069cbfd3a3f99f3a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 6 Aug 2012 13:46:38 -0600 Subject: Btrfs: increase the size of the free space cache Arne was complaining about the space cache having mismatching generation numbers when debugging a deadlock. This is because we can run out of space in our preallocated range for our space cache if you have a pretty fragmented amount of space in your pinned space. So just increase the amount of space we preallocate for space cache so we can be sure to have enough space. This will only really affect data ranges since their the only chunks that end up larger than 256MB. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index d3df65f83b5..1bb408f737f 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2975,17 +2975,16 @@ again: } spin_unlock(&block_group->lock); - num_pages = (int)div64_u64(block_group->key.offset, 1024 * 1024 * 1024); + /* + * Try to preallocate enough space based on how big the block group is. + * Keep in mind this has to include any pinned space which could end up + * taking up quite a bit since it's not folded into the other space + * cache. + */ + num_pages = (int)div64_u64(block_group->key.offset, 256 * 1024 * 1024); if (!num_pages) num_pages = 1; - /* - * Just to make absolutely sure we have enough space, we're going to - * preallocate 12 pages worth of space for each block group. In - * practice we ought to use at most 8, but we need extra space so we can - * add our header and have a terminator between the extents and the - * bitmaps. - */ num_pages *= 16; num_pages *= PAGE_CACHE_SIZE; -- cgit v1.2.3-70-g09d2 From b12a3b1ea209d9dec02731fba58c3dbe7d31cfd8 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Tue, 7 Aug 2012 15:34:49 -0400 Subject: Btrfs: don't run __tree_mod_log_free_eb on leaves When we split a leaf, we may end up inserting a new root on top of that leaf. The reflog code was incorrectly assuming the old root was always a node. This makes sure we skip over leaves. Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 08e0b11ba0a..6d183f60d63 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -625,6 +625,9 @@ __tree_mod_log_free_eb(struct btrfs_fs_info *fs_info, struct extent_buffer *eb) u32 nritems; int ret; + if (btrfs_header_level(eb) == 0) + return; + nritems = btrfs_header_nritems(eb); for (i = nritems - 1; i >= 0; i--) { ret = tree_mod_log_insert_key_locked(fs_info, eb, i, -- cgit v1.2.3-70-g09d2 From 22cd2e7de7b0bd68fb668d23e1564707ca689510 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Thu, 9 Aug 2012 00:16:53 -0600 Subject: Btrfs: fix race in run_clustered_refs With commit commit d1270cd91f308c9d22b2804720c36ccd32dbc35e Author: Arne Jansen Date: Tue Sep 13 15:16:43 2011 +0200 Btrfs: put back delayed refs that are too new I added a window where the delayed_ref's head->ref_mod code can diverge from the sum of the remaining refs, because we release the head->mutex in the middle. This leads to btrfs_lookup_extent_info returning wrong numbers. This patch fixes this by adjusting the head's ref_mod with each delayed ref we run. Signed-off-by: Arne Jansen Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 1bb408f737f..f16411d3c25 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2318,6 +2318,23 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans, ref->in_tree = 0; rb_erase(&ref->rb_node, &delayed_refs->root); delayed_refs->num_entries--; + if (locked_ref) { + /* + * when we play the delayed ref, also correct the + * ref_mod on head + */ + switch (ref->action) { + case BTRFS_ADD_DELAYED_REF: + case BTRFS_ADD_DELAYED_EXTENT: + locked_ref->node.ref_mod -= ref->ref_mod; + break; + case BTRFS_DROP_DELAYED_REF: + locked_ref->node.ref_mod += ref->ref_mod; + break; + default: + WARN_ON(1); + } + } spin_unlock(&delayed_refs->lock); ret = run_one_delayed_ref(trans, root, ref, extent_op, -- cgit v1.2.3-70-g09d2 From c0f62dedd04ae0f3b8a18079db5a015af24e416f Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 8 Aug 2012 21:39:36 -0600 Subject: Btrfs: fix wrong mtime and ctime when creating snapshots When we created a new snapshot, the mtime and ctime of its parent directory were not updated. Fix it. Signed-off-by: Miao Xie Signed-off-by: Chris Mason --- fs/btrfs/transaction.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 7208ada41e0..3ee8d58e97a 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1026,6 +1026,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, btrfs_i_size_write(parent_inode, parent_inode->i_size + dentry->d_name.len * 2); + parent_inode->i_mtime = parent_inode->i_ctime = CURRENT_TIME; ret = btrfs_update_inode(trans, parent_root, parent_inode); if (ret) goto abort_trans_dput; -- cgit v1.2.3-70-g09d2 From 5a24e84c55f57cc49bd1cab531b6ef28b6b7bdaa Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 8 Aug 2012 10:12:59 -0600 Subject: Btrfs: fix enospc problems when deleting a subvol Subvol delete is a special kind of awful where we use the global reserve to cover the ENOSPC requirements. The problem is once we're done removing everything we do a btrfs_update_inode(), which by default will try to do the delayed update stuff which will use it's own reserve. There will be no space in this reserve and we'll return ENOSPC. So instead use btrfs_update_inode_fallback() which will just fallback to updating the inode item in the case of enospc. This is fine because the global reserve covers the space requirements for this. With this patch I can now delete a subvol on a problem image Dave Sterba sent me. Thanks, Reported-by: David Sterba Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 97baf00b40d..0808f483daf 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3171,7 +3171,7 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, btrfs_i_size_write(dir, dir->i_size - name_len * 2); inode_inc_iversion(dir); dir->i_mtime = dir->i_ctime = CURRENT_TIME; - ret = btrfs_update_inode(trans, root, dir); + ret = btrfs_update_inode_fallback(trans, root, dir); if (ret) btrfs_abort_transaction(trans, root, ret); out: -- cgit v1.2.3-70-g09d2 From ae1e206b806ccc490dadff59af8a7a2477b32884 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 7 Aug 2012 16:00:32 -0400 Subject: Btrfs: allow delayed refs to be merged Daniel Blueman reported a bug with fio+balance on a ramdisk setup. Basically what happens is the balance relocates a tree block which will drop the implicit refs for all of its children and adds a full backref. Once the block is relocated we have to add the implicit refs back, so when we cow the block again we add the implicit refs for its children back. The problem comes when the original drop ref doesn't get run before we add the implicit refs back. The delayed ref stuff will specifically prefer ADD operations over DROP to keep us from freeing up an extent that will have references to it, so we try to add the implicit ref before it is actually removed and we panic. This worked fine before because the add would have just canceled the drop out and we would have been fine. But the backref walking work needs to be able to freeze the delayed ref stuff in time so we have this ever increasing sequence number that gets attached to all new delayed ref updates which makes us not merge refs and we run into this issue. So to fix this we need to merge delayed refs. So everytime we run a clustered ref we need to try and merge all of its delayed refs. The backref walking stuff locks the delayed ref head before processing, so if we have it locked we are safe to merge any refs inside of the sequence number. If there is no sequence number we can merge all refs. Doing this not only fixes our bug but keeps the delayed ref code from adding and removing useless refs and batching together multiple refs into one search instead of one search per delayed ref, which will really help our commit times. I ran this with Daniels test and 276 and I haven't seen any problems. Thanks, Reported-by: Daniel J Blueman Signed-off-by: Josef Bacik --- fs/btrfs/delayed-ref.c | 155 ++++++++++++++++++++++++++++++++++++++++--------- fs/btrfs/delayed-ref.h | 4 ++ fs/btrfs/extent-tree.c | 10 ++++ 3 files changed, 142 insertions(+), 27 deletions(-) diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c index 7561431af50..ae941177339 100644 --- a/fs/btrfs/delayed-ref.c +++ b/fs/btrfs/delayed-ref.c @@ -38,17 +38,14 @@ static int comp_tree_refs(struct btrfs_delayed_tree_ref *ref2, struct btrfs_delayed_tree_ref *ref1) { - if (ref1->node.type == BTRFS_TREE_BLOCK_REF_KEY) { - if (ref1->root < ref2->root) - return -1; - if (ref1->root > ref2->root) - return 1; - } else { - if (ref1->parent < ref2->parent) - return -1; - if (ref1->parent > ref2->parent) - return 1; - } + if (ref1->root < ref2->root) + return -1; + if (ref1->root > ref2->root) + return 1; + if (ref1->parent < ref2->parent) + return -1; + if (ref1->parent > ref2->parent) + return 1; return 0; } @@ -85,7 +82,8 @@ static int comp_data_refs(struct btrfs_delayed_data_ref *ref2, * type of the delayed backrefs and content of delayed backrefs. */ static int comp_entry(struct btrfs_delayed_ref_node *ref2, - struct btrfs_delayed_ref_node *ref1) + struct btrfs_delayed_ref_node *ref1, + bool compare_seq) { if (ref1->bytenr < ref2->bytenr) return -1; @@ -102,10 +100,12 @@ static int comp_entry(struct btrfs_delayed_ref_node *ref2, if (ref1->type > ref2->type) return 1; /* merging of sequenced refs is not allowed */ - if (ref1->seq < ref2->seq) - return -1; - if (ref1->seq > ref2->seq) - return 1; + if (compare_seq) { + if (ref1->seq < ref2->seq) + return -1; + if (ref1->seq > ref2->seq) + return 1; + } if (ref1->type == BTRFS_TREE_BLOCK_REF_KEY || ref1->type == BTRFS_SHARED_BLOCK_REF_KEY) { return comp_tree_refs(btrfs_delayed_node_to_tree_ref(ref2), @@ -139,7 +139,7 @@ static struct btrfs_delayed_ref_node *tree_insert(struct rb_root *root, entry = rb_entry(parent_node, struct btrfs_delayed_ref_node, rb_node); - cmp = comp_entry(entry, ins); + cmp = comp_entry(entry, ins, 1); if (cmp < 0) p = &(*p)->rb_left; else if (cmp > 0) @@ -233,6 +233,114 @@ int btrfs_delayed_ref_lock(struct btrfs_trans_handle *trans, return 0; } +static void inline drop_delayed_ref(struct btrfs_trans_handle *trans, + struct btrfs_delayed_ref_root *delayed_refs, + struct btrfs_delayed_ref_node *ref) +{ + rb_erase(&ref->rb_node, &delayed_refs->root); + ref->in_tree = 0; + btrfs_put_delayed_ref(ref); + delayed_refs->num_entries--; + if (trans->delayed_ref_updates) + trans->delayed_ref_updates--; +} + +static int merge_ref(struct btrfs_trans_handle *trans, + struct btrfs_delayed_ref_root *delayed_refs, + struct btrfs_delayed_ref_node *ref, u64 seq) +{ + struct rb_node *node; + int merged = 0; + int mod = 0; + int done = 0; + + node = rb_prev(&ref->rb_node); + while (node) { + struct btrfs_delayed_ref_node *next; + + next = rb_entry(node, struct btrfs_delayed_ref_node, rb_node); + node = rb_prev(node); + if (next->bytenr != ref->bytenr) + break; + if (seq && next->seq >= seq) + break; + if (comp_entry(ref, next, 0)) + continue; + + if (ref->action == next->action) { + mod = next->ref_mod; + } else { + if (ref->ref_mod < next->ref_mod) { + struct btrfs_delayed_ref_node *tmp; + + tmp = ref; + ref = next; + next = tmp; + done = 1; + } + mod = -next->ref_mod; + } + + merged++; + drop_delayed_ref(trans, delayed_refs, next); + ref->ref_mod += mod; + if (ref->ref_mod == 0) { + drop_delayed_ref(trans, delayed_refs, ref); + break; + } else { + /* + * You can't have multiples of the same ref on a tree + * block. + */ + WARN_ON(ref->type == BTRFS_TREE_BLOCK_REF_KEY || + ref->type == BTRFS_SHARED_BLOCK_REF_KEY); + } + + if (done) + break; + node = rb_prev(&ref->rb_node); + } + + return merged; +} + +void btrfs_merge_delayed_refs(struct btrfs_trans_handle *trans, + struct btrfs_fs_info *fs_info, + struct btrfs_delayed_ref_root *delayed_refs, + struct btrfs_delayed_ref_head *head) +{ + struct rb_node *node; + u64 seq = 0; + + spin_lock(&fs_info->tree_mod_seq_lock); + if (!list_empty(&fs_info->tree_mod_seq_list)) { + struct seq_list *elem; + + elem = list_first_entry(&fs_info->tree_mod_seq_list, + struct seq_list, list); + seq = elem->seq; + } + spin_unlock(&fs_info->tree_mod_seq_lock); + + node = rb_prev(&head->node.rb_node); + while (node) { + struct btrfs_delayed_ref_node *ref; + + ref = rb_entry(node, struct btrfs_delayed_ref_node, + rb_node); + if (ref->bytenr != head->node.bytenr) + break; + + /* We can't merge refs that are outside of our seq count */ + if (seq && ref->seq >= seq) + break; + if (merge_ref(trans, delayed_refs, ref, seq)) + node = rb_prev(&head->node.rb_node); + else + node = rb_prev(node); + } +} + int btrfs_check_delayed_seq(struct btrfs_fs_info *fs_info, struct btrfs_delayed_ref_root *delayed_refs, u64 seq) @@ -336,18 +444,11 @@ update_existing_ref(struct btrfs_trans_handle *trans, * every changing the extent allocation tree. */ existing->ref_mod--; - if (existing->ref_mod == 0) { - rb_erase(&existing->rb_node, - &delayed_refs->root); - existing->in_tree = 0; - btrfs_put_delayed_ref(existing); - delayed_refs->num_entries--; - if (trans->delayed_ref_updates) - trans->delayed_ref_updates--; - } else { + if (existing->ref_mod == 0) + drop_delayed_ref(trans, delayed_refs, existing); + else WARN_ON(existing->type == BTRFS_TREE_BLOCK_REF_KEY || existing->type == BTRFS_SHARED_BLOCK_REF_KEY); - } } else { WARN_ON(existing->type == BTRFS_TREE_BLOCK_REF_KEY || existing->type == BTRFS_SHARED_BLOCK_REF_KEY); diff --git a/fs/btrfs/delayed-ref.h b/fs/btrfs/delayed-ref.h index 0d7c90c366b..ab530059584 100644 --- a/fs/btrfs/delayed-ref.h +++ b/fs/btrfs/delayed-ref.h @@ -167,6 +167,10 @@ int btrfs_add_delayed_extent_op(struct btrfs_fs_info *fs_info, struct btrfs_trans_handle *trans, u64 bytenr, u64 num_bytes, struct btrfs_delayed_extent_op *extent_op); +void btrfs_merge_delayed_refs(struct btrfs_trans_handle *trans, + struct btrfs_fs_info *fs_info, + struct btrfs_delayed_ref_root *delayed_refs, + struct btrfs_delayed_ref_head *head); struct btrfs_delayed_ref_head * btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index f16411d3c25..ba58024d40d 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2251,6 +2251,16 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans, } } + /* + * We need to try and merge add/drops of the same ref since we + * can run into issues with relocate dropping the implicit ref + * and then it being added back again before the drop can + * finish. If we merged anything we need to re-loop so we can + * get a good ref. + */ + btrfs_merge_delayed_refs(trans, fs_info, delayed_refs, + locked_ref); + /* * locked_ref is the head node, so we have to go one * node back for any delayed ref updates -- cgit v1.2.3-70-g09d2 From 68ce9682a4bb95d6be5529cb57214bf2a1b7d20e Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Wed, 1 Aug 2012 05:45:52 -0600 Subject: Btrfs: remove superblock writing after fatal error With commit acce952b0, btrfs was changed to flag the filesystem with BTRFS_SUPER_FLAG_ERROR and switch to read-only mode after a fatal error happened like a write I/O errors of all mirrors. In such situations, on unmount, the superblock is written in btrfs_error_commit_super(). This is done with the intention to be able to evaluate the error flag on the next mount. A warning is printed in this case during the next mount and the log tree is ignored. The issue is that it is possible that the superblock points to a root that was not written (due to write I/O errors). The result is that the filesystem cannot be mounted. btrfsck also does not start and all the other btrfs-progs tools fail to start as well. However, mount -o recovery is working well and does the right things to recover the filesystem (i.e., don't use the log root, clear the free space cache and use the next mountable root that is stored in the root backup array). This patch removes the writing of the superblock when BTRFS_SUPER_FLAG_ERROR is set, and removes the handling of the error flag in the mount function. These lines can be used to reproduce the issue (using /dev/sdm): SCRATCH_DEV=/dev/sdm SCRATCH_MNT=/mnt echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup create foo ls -alLF /dev/mapper/foo mkfs.btrfs /dev/mapper/foo mount /dev/mapper/foo $SCRATCH_MNT echo bar > $SCRATCH_MNT/foo sync echo 0 25165824 error | dmsetup reload foo dmsetup resume foo ls -alF $SCRATCH_MNT touch $SCRATCH_MNT/1 ls -alF $SCRATCH_MNT sleep 35 echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup reload foo dmsetup resume foo sleep 1 umount $SCRATCH_MNT btrfsck /dev/mapper/foo dmsetup remove foo Signed-off-by: Stefan Behrens Signed-off-by: Jan Schmidt --- fs/btrfs/disk-io.c | 36 ++++-------------------------------- fs/btrfs/disk-io.h | 2 +- 2 files changed, 5 insertions(+), 33 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index dd86a5d8842..3c4c4397f47 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2527,8 +2527,7 @@ retry_root_backup: goto fail_trans_kthread; /* do not make disk changes in broken FS */ - if (btrfs_super_log_root(disk_super) != 0 && - !(fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR)) { + if (btrfs_super_log_root(disk_super) != 0) { u64 bytenr = btrfs_super_log_root(disk_super); if (fs_devices->rw_devices == 0) { @@ -3188,30 +3187,14 @@ int close_ctree(struct btrfs_root *root) /* clear out the rbtree of defraggable inodes */ btrfs_run_defrag_inodes(fs_info); - /* - * Here come 2 situations when btrfs is broken to flip readonly: - * - * 1. when btrfs flips readonly somewhere else before - * btrfs_commit_super, sb->s_flags has MS_RDONLY flag, - * and btrfs will skip to write sb directly to keep - * ERROR state on disk. - * - * 2. when btrfs flips readonly just in btrfs_commit_super, - * and in such case, btrfs cannot write sb via btrfs_commit_super, - * and since fs_state has been set BTRFS_SUPER_FLAG_ERROR flag, - * btrfs will cleanup all FS resources first and write sb then. - */ if (!(fs_info->sb->s_flags & MS_RDONLY)) { ret = btrfs_commit_super(root); if (ret) printk(KERN_ERR "btrfs: commit super ret %d\n", ret); } - if (fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) { - ret = btrfs_error_commit_super(root); - if (ret) - printk(KERN_ERR "btrfs: commit super ret %d\n", ret); - } + if (fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) + btrfs_error_commit_super(root); btrfs_put_block_group_cache(fs_info); @@ -3433,18 +3416,11 @@ static int btrfs_check_super_valid(struct btrfs_fs_info *fs_info, if (read_only) return 0; - if (fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) { - printk(KERN_WARNING "warning: mount fs with errors, " - "running btrfsck is recommended\n"); - } - return 0; } -int btrfs_error_commit_super(struct btrfs_root *root) +void btrfs_error_commit_super(struct btrfs_root *root) { - int ret; - mutex_lock(&root->fs_info->cleaner_mutex); btrfs_run_delayed_iputs(root); mutex_unlock(&root->fs_info->cleaner_mutex); @@ -3454,10 +3430,6 @@ int btrfs_error_commit_super(struct btrfs_root *root) /* cleanup FS via transaction */ btrfs_cleanup_transaction(root); - - ret = write_ctree_super(NULL, root, 0); - - return ret; } static void btrfs_destroy_ordered_operations(struct btrfs_root *root) diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h index 95e147eea23..c5b00a735fe 100644 --- a/fs/btrfs/disk-io.h +++ b/fs/btrfs/disk-io.h @@ -54,7 +54,7 @@ int write_ctree_super(struct btrfs_trans_handle *trans, struct btrfs_root *root, int max_mirrors); struct buffer_head *btrfs_read_dev_super(struct block_device *bdev); int btrfs_commit_super(struct btrfs_root *root); -int btrfs_error_commit_super(struct btrfs_root *root); +void btrfs_error_commit_super(struct btrfs_root *root); struct extent_buffer *btrfs_find_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize); struct btrfs_root *btrfs_read_fs_root_no_radix(struct btrfs_root *tree_root, -- cgit v1.2.3-70-g09d2 From 5ee0844d6427e7338e0aba748f62b62d07ea2ed0 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Mon, 27 Aug 2012 08:30:03 -0600 Subject: Btrfs: revert checksum error statistic which can cause a BUG() Commit 442a4f6308e694e0fa6025708bd5e4e424bbf51c added btrfs device statistic counters for detected IO and checksum errors to Linux 3.5. The statistic part that counts checksum errors in end_bio_extent_readpage() can cause a BUG() in a subfunction: "kernel BUG at fs/btrfs/volumes.c:3762!" That part is reverted with the current patch. However, the counting of checksum errors in the scrub context remains active, and the counting of detected IO errors (read, write or flush errors) in all contexts remains active. Cc: stable # 3.5 Signed-off-by: Stefan Behrens Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 17 ++--------------- fs/btrfs/volumes.c | 22 ---------------------- fs/btrfs/volumes.h | 2 -- 3 files changed, 2 insertions(+), 39 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 3e7c9ed6505..49085f2336d 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2329,23 +2329,10 @@ static void end_bio_extent_readpage(struct bio *bio, int err) if (uptodate && tree->ops && tree->ops->readpage_end_io_hook) { ret = tree->ops->readpage_end_io_hook(page, start, end, state, mirror); - if (ret) { - /* no IO indicated but software detected errors - * in the block, either checksum errors or - * issues with the contents */ - struct btrfs_root *root = - BTRFS_I(page->mapping->host)->root; - struct btrfs_device *device; - + if (ret) uptodate = 0; - device = btrfs_find_device_for_logical( - root, start, mirror); - if (device) - btrfs_dev_stat_inc_and_print(device, - BTRFS_DEV_STAT_CORRUPTION_ERRS); - } else { + else clean_io_failure(start, page); - } } if (!uptodate && tree->ops && tree->ops->readpage_io_failed_hook) { diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 0b1e69d380d..3f4e70e171e 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -4610,28 +4610,6 @@ int btrfs_read_sys_array(struct btrfs_root *root) return ret; } -struct btrfs_device *btrfs_find_device_for_logical(struct btrfs_root *root, - u64 logical, int mirror_num) -{ - struct btrfs_mapping_tree *map_tree = &root->fs_info->mapping_tree; - int ret; - u64 map_length = 0; - struct btrfs_bio *bbio = NULL; - struct btrfs_device *device; - - BUG_ON(mirror_num == 0); - ret = btrfs_map_block(map_tree, WRITE, logical, &map_length, &bbio, - mirror_num); - if (ret) { - BUG_ON(bbio != NULL); - return NULL; - } - BUG_ON(mirror_num != bbio->mirror_num); - device = bbio->stripes[mirror_num - 1].dev; - kfree(bbio); - return device; -} - int btrfs_read_chunk_tree(struct btrfs_root *root) { struct btrfs_path *path; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index 5479325987b..53c06af92e8 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -289,8 +289,6 @@ int btrfs_cancel_balance(struct btrfs_fs_info *fs_info); int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset); int find_free_dev_extent(struct btrfs_device *device, u64 num_bytes, u64 *start, u64 *max_avail); -struct btrfs_device *btrfs_find_device_for_logical(struct btrfs_root *root, - u64 logical, int mirror_num); void btrfs_dev_stat_print_on_error(struct btrfs_device *device); void btrfs_dev_stat_inc_and_print(struct btrfs_device *dev, int index); int btrfs_get_dev_stats(struct btrfs_root *root, -- cgit v1.2.3-70-g09d2 From bd7de2c9a449e26a5493d918618eb20ae60d56bd Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 24 Aug 2012 12:53:03 -0600 Subject: Btrfs: fix deadlock with freeze and sync V2 We can deadlock with freeze right now because we unconditionally start a transaction in our ->sync_fs() call. To fix this just check and see if we have a running transaction to commit. This saves us from the deadlock because at this point we'll have the umount sem for the sb so we're safe from freezes coming in after we've done our check. With this patch the freeze xfstests no longer deadlocks. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/super.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 2e06f124f28..073c2368f45 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -813,7 +813,6 @@ int btrfs_sync_fs(struct super_block *sb, int wait) struct btrfs_trans_handle *trans; struct btrfs_fs_info *fs_info = btrfs_sb(sb); struct btrfs_root *root = fs_info->tree_root; - int ret; trace_btrfs_sync_fs(wait); @@ -824,11 +823,17 @@ int btrfs_sync_fs(struct super_block *sb, int wait) btrfs_wait_ordered_extents(root, 0, 0); - trans = btrfs_start_transaction(root, 0); + spin_lock(&fs_info->trans_lock); + if (!fs_info->running_transaction) { + spin_unlock(&fs_info->trans_lock); + return 0; + } + spin_unlock(&fs_info->trans_lock); + + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) return PTR_ERR(trans); - ret = btrfs_commit_transaction(trans, root); - return ret; + return btrfs_commit_transaction(trans, root); } static int btrfs_show_options(struct seq_file *seq, struct dentry *dentry) -- cgit v1.2.3-70-g09d2 From 24c03fa5cf3d02c327cf9f2fc39f72664b1bd7e1 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Wed, 22 Aug 2012 20:10:38 -0600 Subject: Btrfs: fix a dio write regression This bug is introduced by commit 3b8bde746f6f9bd36a9f05f5f3b6e334318176a9 (Btrfs: lock extents as we map them in DIO). In dio write, we should unlock the section which we didn't do IO on in case that we fall back to buffered write. But we need to not only unlock the section but also cleanup reserved space for the section. This bug was found while running xfstests 133, with this 133 no longer complains. Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 0808f483daf..38cda78de5e 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5992,11 +5992,27 @@ unlock: * in the case of read we need to unlock only the end area that we * aren't using if there is any left over space. */ - if (lockstart < lockend) - clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, lockend, - unlock_bits, 1, 0, &cached_state, GFP_NOFS); - else + if (lockstart < lockend) { + if (create && len < lockend - lockstart) { + clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, + lockstart + len - 1, unlock_bits, 1, 0, + &cached_state, GFP_NOFS); + /* + * Beside unlock, we also need to cleanup reserved space + * for the left range by attaching EXTENT_DO_ACCOUNTING. + */ + clear_extent_bit(&BTRFS_I(inode)->io_tree, + lockstart + len, lockend, + unlock_bits | EXTENT_DO_ACCOUNTING, + 1, 0, NULL, GFP_NOFS); + } else { + clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, + lockend, unlock_bits, 1, 0, + &cached_state, GFP_NOFS); + } + } else { free_extent_state(cached_state); + } free_extent_map(em); -- cgit v1.2.3-70-g09d2 From d280e5be940931c84bb2e9831ead9d02bc785484 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Tue, 21 Aug 2012 21:13:25 -0600 Subject: Btrfs: fix ordered extent leak when failing to start a transaction We cannot just return error before freeing ordered extent and releasing reserved space when we fail to start a transacion. Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 38cda78de5e..6ba80b90287 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1882,8 +1882,11 @@ static int btrfs_finish_ordered_io(struct btrfs_ordered_extent *ordered_extent) trans = btrfs_join_transaction_nolock(root); else trans = btrfs_join_transaction(root); - if (IS_ERR(trans)) - return PTR_ERR(trans); + if (IS_ERR(trans)) { + ret = PTR_ERR(trans); + trans = NULL; + goto out; + } trans->block_rsv = &root->fs_info->delalloc_block_rsv; ret = btrfs_update_inode_fallback(trans, root, inode); if (ret) /* -ENOMEM or corruption */ -- cgit v1.2.3-70-g09d2 From 256dd1bb3750ac5ad49b40887c1691788dc44b33 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Fri, 10 Aug 2012 08:58:21 -0600 Subject: Btrfs: fix that repair code is spuriously executed for transid failures If verify_parent_transid() fails for all mirrors, the current code calls repair_io_failure() anyway which means: - that the disk block is rewritten without repairing anything and - that a kernel log message is printed which misleadingly claims that a read error was corrected. This is an example: parent transid verify failed on 615015833600 wanted 110423 found 110424 parent transid verify failed on 615015833600 wanted 110423 found 110424 btrfs read error corrected: ino 1 off 615015833600 (dev /dev/...) It is wrong to ignore the results from verify_parent_transid() and to call repair_eb_io_failure() when the verification of the transids failed. This commit fixes the issue. Signed-off-by: Stefan Behrens Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 3c4c4397f47..29c69e60d3b 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -377,9 +377,13 @@ static int btree_read_extent_buffer_pages(struct btrfs_root *root, ret = read_extent_buffer_pages(io_tree, eb, start, WAIT_COMPLETE, btree_get_extent, mirror_num); - if (!ret && !verify_parent_transid(io_tree, eb, + if (!ret) { + if (!verify_parent_transid(io_tree, eb, parent_transid, 0)) - break; + break; + else + ret = -EIO; + } /* * This buffer's crc is fine, but its contents are corrupted, so -- cgit v1.2.3-70-g09d2 From 14f0458a41e033dee31ba605137419385c03fc78 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 27 Aug 2012 16:22:49 +1000 Subject: drm/nvc0/copy: check PUNITS to determine which copy engines are disabled On some Fermi chipsets (NVCE particularly) PCOPY1 doesn't exist. And if what I've seen on Kepler is true of Fermi too, chipsets of the same type can have different PCOPY units available. This should fix a v3.5 regression reported by a number of people effecting suspend/resume on NVC8/NVCE chipsets. Cc: stable@vger.kernel.org [3.5] Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_state.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 1866dbb4997..c61014442aa 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -736,9 +736,11 @@ nouveau_card_init(struct drm_device *dev) } break; case NV_C0: - nvc0_copy_create(dev, 1); + if (!(nv_rd32(dev, 0x022500) & 0x00000200)) + nvc0_copy_create(dev, 1); case NV_D0: - nvc0_copy_create(dev, 0); + if (!(nv_rd32(dev, 0x022500) & 0x00000100)) + nvc0_copy_create(dev, 0); break; default: break; -- cgit v1.2.3-70-g09d2 From 4b1c2f41c2dda158bb7a3dded70775a76b581995 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 23 Jul 2012 10:46:11 -0700 Subject: watchdog: fix watchdog-test.c build warning Fix compiler warning by making the function static: Documentation/watchdog/src/watchdog-test.c:34:6: warning: no previous prototype for 'term' Signed-off-by: Randy Dunlap Signed-off-by: Wim Van Sebroeck --- Documentation/watchdog/src/watchdog-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/watchdog/src/watchdog-test.c b/Documentation/watchdog/src/watchdog-test.c index 73ff5cc93e0..3da822967ee 100644 --- a/Documentation/watchdog/src/watchdog-test.c +++ b/Documentation/watchdog/src/watchdog-test.c @@ -31,7 +31,7 @@ static void keep_alive(void) * or "-e" to enable the card. */ -void term(int sig) +static void term(int sig) { close(fd); fprintf(stderr, "Stopping watchdog ticks...\n"); -- cgit v1.2.3-70-g09d2 From 3e5531caffcc07b67452c4a8170ffb4c2bd1c9b7 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 7 Aug 2012 15:14:12 +0530 Subject: watchdog: da9052: Remove duplicate inclusion of delay.h delay.h header file was included twice. Signed-off-by: Sachin Kamat Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/da9052_wdt.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/watchdog/da9052_wdt.c b/drivers/watchdog/da9052_wdt.c index 3f75129eb0a..f7abbaeebca 100644 --- a/drivers/watchdog/da9052_wdt.c +++ b/drivers/watchdog/da9052_wdt.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3-70-g09d2 From 305a3d204aae15eddf1988e50e33aee4119b710d Mon Sep 17 00:00:00 2001 From: Marek Olšák Date: Wed, 22 Aug 2012 17:02:42 +0200 Subject: drm/radeon: fix reading CB_COLORn_MASK from the CS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index ab74e6b149e..7799e283811 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -1416,7 +1416,7 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case R_028118_CB_COLOR6_MASK: case R_02811C_CB_COLOR7_MASK: tmp = (reg - R_028100_CB_COLOR0_MASK) / 4; - track->cb_color_mask[tmp] = ib[idx]; + track->cb_color_mask[tmp] = radeon_get_ib_value(p, idx); if (G_0280A0_TILE_MODE(track->cb_color_info[tmp])) { track->cb_dirty = true; } -- cgit v1.2.3-70-g09d2 From 3b5ef597ec40603c368f65d3eb6d9818ed6a7bae Mon Sep 17 00:00:00 2001 From: Marek Olšák Date: Wed, 22 Aug 2012 17:02:43 +0200 Subject: drm/radeon: initialize tracked CS state MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This should help catch uninitialized registers and reject commands because of that. Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_cs.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 7799e283811..8866937bd0b 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -315,7 +315,14 @@ static void r600_cs_track_init(struct r600_cs_track *track) track->cb_color_bo[i] = NULL; track->cb_color_bo_offset[i] = 0xFFFFFFFF; track->cb_color_bo_mc[i] = 0xFFFFFFFF; - } + track->cb_color_frag_bo[i] = NULL; + track->cb_color_frag_offset[i] = 0xFFFFFFFF; + track->cb_color_tile_bo[i] = NULL; + track->cb_color_tile_offset[i] = 0xFFFFFFFF; + track->cb_color_mask[i] = 0xFFFFFFFF; + } + track->nsamples = 16; + track->log_nsamples = 4; track->cb_target_mask = 0xFFFFFFFF; track->cb_shader_mask = 0xFFFFFFFF; track->cb_dirty = true; -- cgit v1.2.3-70-g09d2 From 523885dec109188b6bed53ec67362072f13b0d43 Mon Sep 17 00:00:00 2001 From: Marek Olšák Date: Fri, 24 Aug 2012 14:27:36 +0200 Subject: drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Checking of the second colorbuffer was skipped on r700, because CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff, so we must set the number of samples of the second colorbuffer to 1 in order to pass the CS checker. The DRM version is bumped, because RESOLVE_BOX is always rejected without this fix on r600. Signed-off-by: Marek Olšák Reviewed-by: Jerome Glisse Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_cs.c | 19 +++++++++++++++++-- drivers/gpu/drm/radeon/r600d.h | 8 ++++++++ drivers/gpu/drm/radeon/radeon_drv.c | 3 ++- drivers/gpu/drm/radeon/reg_srcs/r600 | 1 - 4 files changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 8866937bd0b..f37676d7f21 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -63,6 +63,7 @@ struct r600_cs_track { u32 cb_color_size_idx[8]; /* unused */ u32 cb_target_mask; u32 cb_shader_mask; /* unused */ + bool is_resolve; u32 cb_color_size[8]; u32 vgt_strmout_en; u32 vgt_strmout_buffer_en; @@ -321,6 +322,7 @@ static void r600_cs_track_init(struct r600_cs_track *track) track->cb_color_tile_offset[i] = 0xFFFFFFFF; track->cb_color_mask[i] = 0xFFFFFFFF; } + track->is_resolve = false; track->nsamples = 16; track->log_nsamples = 4; track->cb_target_mask = 0xFFFFFFFF; @@ -359,6 +361,8 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) volatile u32 *ib = p->ib.ptr; unsigned array_mode; u32 format; + /* When resolve is used, the second colorbuffer has always 1 sample. */ + unsigned nsamples = track->is_resolve && i == 1 ? 1 : track->nsamples; size = radeon_bo_size(track->cb_color_bo[i]) - track->cb_color_bo_offset[i]; format = G_0280A0_FORMAT(track->cb_color_info[i]); @@ -382,7 +386,7 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) array_check.group_size = track->group_size; array_check.nbanks = track->nbanks; array_check.npipes = track->npipes; - array_check.nsamples = track->nsamples; + array_check.nsamples = nsamples; array_check.blocksize = r600_fmt_get_blocksize(format); if (r600_get_array_mode_alignment(&array_check, &pitch_align, &height_align, &depth_align, &base_align)) { @@ -428,7 +432,7 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) /* check offset */ tmp = r600_fmt_get_nblocksy(format, height) * r600_fmt_get_nblocksx(format, pitch) * - r600_fmt_get_blocksize(format) * track->nsamples; + r600_fmt_get_blocksize(format) * nsamples; switch (array_mode) { default: case V_0280A0_ARRAY_LINEAR_GENERAL: @@ -799,6 +803,12 @@ static int r600_cs_track_check(struct radeon_cs_parser *p) */ if (track->cb_dirty) { tmp = track->cb_target_mask; + + /* We must check both colorbuffers for RESOLVE. */ + if (track->is_resolve) { + tmp |= 0xff; + } + for (i = 0; i < 8; i++) { if ((tmp >> (i * 4)) & 0xF) { /* at least one component is enabled */ @@ -1288,6 +1298,11 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) track->nsamples = 1 << tmp; track->cb_dirty = true; break; + case R_028808_CB_COLOR_CONTROL: + tmp = G_028808_SPECIAL_OP(radeon_get_ib_value(p, idx)); + track->is_resolve = tmp == V_028808_SPECIAL_RESOLVE_BOX; + track->cb_dirty = true; + break; case R_0280A0_CB_COLOR0_INFO: case R_0280A4_CB_COLOR1_INFO: case R_0280A8_CB_COLOR2_INFO: diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index bdb69a63062..fa6f37099ba 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -66,6 +66,14 @@ #define CC_RB_BACKEND_DISABLE 0x98F4 #define BACKEND_DISABLE(x) ((x) << 16) +#define R_028808_CB_COLOR_CONTROL 0x28808 +#define S_028808_SPECIAL_OP(x) (((x) & 0x7) << 4) +#define G_028808_SPECIAL_OP(x) (((x) >> 4) & 0x7) +#define C_028808_SPECIAL_OP 0xFFFFFF8F +#define V_028808_SPECIAL_NORMAL 0x00 +#define V_028808_SPECIAL_DISABLE 0x01 +#define V_028808_SPECIAL_RESOLVE_BOX 0x07 + #define CB_COLOR0_BASE 0x28040 #define CB_COLOR1_BASE 0x28044 #define CB_COLOR2_BASE 0x28048 diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 27d22d709c9..8c593ea82c4 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -63,9 +63,10 @@ * 2.19.0 - r600-eg: MSAA textures * 2.20.0 - r600-si: RADEON_INFO_TIMESTAMP query * 2.21.0 - r600-r700: FMASK and CMASK + * 2.22.0 - r600 only: RESOLVE_BOX allowed */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 21 +#define KMS_DRIVER_MINOR 22 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600 index f93e45d869f..20bfbda7b3f 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/r600 +++ b/drivers/gpu/drm/radeon/reg_srcs/r600 @@ -744,7 +744,6 @@ r600 0x9400 0x00028C38 CB_CLRCMP_DST 0x00028C3C CB_CLRCMP_MSK 0x00028C34 CB_CLRCMP_SRC -0x00028808 CB_COLOR_CONTROL 0x0002842C CB_FOG_BLUE 0x00028428 CB_FOG_GREEN 0x00028424 CB_FOG_RED -- cgit v1.2.3-70-g09d2 From 4e58591c8961b3e31709313f75819f2eec06e322 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 21 Aug 2012 19:06:21 -0400 Subject: drm/radeon: don't disable plls that are in use by other crtcs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some plls are shared for DP. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer --- drivers/gpu/drm/radeon/atombios_crtc.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index f4d4505fe83..961d366f00e 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1682,9 +1682,22 @@ static void atombios_crtc_disable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_atom_ss ss; + int i; atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); + for (i = 0; i < rdev->num_crtc; i++) { + if (rdev->mode_info.crtcs[i] && + rdev->mode_info.crtcs[i]->enabled && + i != radeon_crtc->crtc_id && + radeon_crtc->pll_id == rdev->mode_info.crtcs[i]->pll_id) { + /* one other crtc is using this pll don't turn + * off the pll + */ + goto done; + } + } + switch (radeon_crtc->pll_id) { case ATOM_PPLL1: case ATOM_PPLL2: @@ -1701,6 +1714,7 @@ static void atombios_crtc_disable(struct drm_crtc *crtc) default: break; } +done: radeon_crtc->pll_id = -1; } -- cgit v1.2.3-70-g09d2 From 8d1af57ae3c4458ed0de93ef97f388dd1b3239c7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 Aug 2012 09:54:56 -0400 Subject: drm/radeon/atom: rework DIG modesetting on DCE3+ The ordering is important and the current drm code wasn't cutting it for modern DIG encoders. We need to have information about crtc before setting up the encoders so I've shifted the ordering a bit. Probably we'll need a full rework akin to danvet's recent intel patchs. This patch fixes numerous issues with DP bridge chips and makes link training much more reliable. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_encoders.c | 109 +++++++++++++---------------- 1 file changed, 47 insertions(+), 62 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index f9bc27fe269..4a7f95e5550 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -1379,6 +1379,8 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder); + struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); struct radeon_connector *radeon_connector = NULL; struct radeon_connector_atom_dig *radeon_dig_connector = NULL; @@ -1390,19 +1392,37 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) switch (mode) { case DRM_MODE_DPMS_ON: - /* some early dce3.2 boards have a bug in their transmitter control table */ - if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730) || - ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { - if (ASIC_IS_DCE6(rdev)) { - /* It seems we need to call ATOM_ENCODER_CMD_SETUP again - * before reenabling encoder on DPMS ON, otherwise we never - * get picture - */ - atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { + if (!connector) + dig->panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; + else + dig->panel_mode = radeon_dp_get_panel_mode(encoder, connector); + + /* setup and enable the encoder */ + atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); + atombios_dig_encoder_setup(encoder, + ATOM_ENCODER_CMD_SETUP_PANEL_MODE, + dig->panel_mode); + if (ext_encoder) { + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev)) + atombios_external_encoder_setup(encoder, ext_encoder, + EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP); } atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); - } else { + } else if (ASIC_IS_DCE4(rdev)) { + /* setup and enable the encoder */ + atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); + /* enable the transmitter */ + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); + } else { + /* setup and enable the encoder and transmitter */ + atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); + /* some early dce3.2 boards have a bug in their transmitter control table */ + if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730)) + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); } if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) { if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { @@ -1420,10 +1440,19 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: - if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { + /* disable the transmitter */ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - else + } else if (ASIC_IS_DCE4(rdev)) { + /* disable the transmitter */ + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); + } else { + /* disable the encoder and transmitter */ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); + atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0); + } if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) { if (ASIC_IS_DCE4(rdev)) atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0); @@ -1848,10 +1877,12 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder); radeon_encoder->pixel_clock = adjusted_mode->clock; + /* need to call this here rather than in prepare() since we need some crtc info */ + radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); + if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) { if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)) atombios_yuv_setup(encoder, true); @@ -1870,38 +1901,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { - struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); - struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; - - if (!connector) - dig->panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; - else - dig->panel_mode = radeon_dp_get_panel_mode(encoder, connector); - - /* setup and enable the encoder */ - atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); - atombios_dig_encoder_setup(encoder, - ATOM_ENCODER_CMD_SETUP_PANEL_MODE, - dig->panel_mode); - } else if (ASIC_IS_DCE4(rdev)) { - /* disable the transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - /* setup and enable the encoder */ - atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); - - /* enable the transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); - } else { - /* disable the encoder and transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0); - - /* setup and enable the encoder and transmitter */ - atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0); - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0); - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); - } + /* handled in dpms */ break; case ENCODER_OBJECT_ID_INTERNAL_DDI: case ENCODER_OBJECT_ID_INTERNAL_DVO1: @@ -1922,14 +1922,6 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, break; } - if (ext_encoder) { - if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev)) - atombios_external_encoder_setup(encoder, ext_encoder, - EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP); - else - atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE); - } - atombios_apply_encoder_quirks(encoder, adjusted_mode); if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) { @@ -2116,7 +2108,6 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) } radeon_atom_output_lock(encoder, true); - radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); if (connector) { struct radeon_connector *radeon_connector = to_radeon_connector(connector); @@ -2137,6 +2128,7 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) static void radeon_atom_encoder_commit(struct drm_encoder *encoder) { + /* need to call this here as we need the crtc set up */ radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_ON); radeon_atom_output_lock(encoder, false); } @@ -2177,14 +2169,7 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder) case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - if (ASIC_IS_DCE4(rdev)) - /* disable the transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - else { - /* disable the encoder and transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0); - } + /* handled in dpms */ break; case ENCODER_OBJECT_ID_INTERNAL_DDI: case ENCODER_OBJECT_ID_INTERNAL_DVO1: -- cgit v1.2.3-70-g09d2 From c205b232a64fed6d26edd7e40985b396de99a27f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 24 Aug 2012 18:21:21 -0400 Subject: drm/radeon/atom: powergating fixes for DCE6 Power gating is per crtc pair, but the powergating registers should be called individually. The hw handles power up/down properly. The pair is powered up if either crtc in the pair is powered up and the pair is not powered down until both crtcs in the pair are powered down. This simplifies programming and should save additional power as the previous code never actually power gated the crtc pair. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_crtc.c | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 961d366f00e..2817101fb16 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -258,7 +258,6 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) radeon_crtc->enabled = true; /* adjust pm to dpms changes BEFORE enabling crtcs */ radeon_pm_compute_clocks(rdev); - /* disable crtc pair power gating before programming */ if (ASIC_IS_DCE6(rdev) && !radeon_crtc->in_mode_set) atombios_powergate_crtc(crtc, ATOM_DISABLE); atombios_enable_crtc(crtc, ATOM_ENABLE); @@ -278,25 +277,8 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) atombios_enable_crtc_memreq(crtc, ATOM_DISABLE); atombios_enable_crtc(crtc, ATOM_DISABLE); radeon_crtc->enabled = false; - /* power gating is per-pair */ - if (ASIC_IS_DCE6(rdev) && !radeon_crtc->in_mode_set) { - struct drm_crtc *other_crtc; - struct radeon_crtc *other_radeon_crtc; - list_for_each_entry(other_crtc, &rdev->ddev->mode_config.crtc_list, head) { - other_radeon_crtc = to_radeon_crtc(other_crtc); - if (((radeon_crtc->crtc_id == 0) && (other_radeon_crtc->crtc_id == 1)) || - ((radeon_crtc->crtc_id == 1) && (other_radeon_crtc->crtc_id == 0)) || - ((radeon_crtc->crtc_id == 2) && (other_radeon_crtc->crtc_id == 3)) || - ((radeon_crtc->crtc_id == 3) && (other_radeon_crtc->crtc_id == 2)) || - ((radeon_crtc->crtc_id == 4) && (other_radeon_crtc->crtc_id == 5)) || - ((radeon_crtc->crtc_id == 5) && (other_radeon_crtc->crtc_id == 4))) { - /* if both crtcs in the pair are off, enable power gating */ - if (other_radeon_crtc->enabled == false) - atombios_powergate_crtc(crtc, ATOM_ENABLE); - break; - } - } - } + if (ASIC_IS_DCE6(rdev) && !radeon_crtc->in_mode_set) + atombios_powergate_crtc(crtc, ATOM_ENABLE); /* adjust pm to dpms changes AFTER disabling crtcs */ radeon_pm_compute_clocks(rdev); break; -- cgit v1.2.3-70-g09d2 From 0ceb996c9e729b056977a0f07692b38bbd57bc77 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 27 Aug 2012 17:48:18 -0400 Subject: drm/radeon: rework panel mode setup Adjust the panel mode setup to match the behavior of the vbios. Rather than checking for specific bridge chip ids, just check the eDP configuration register. This saves extra aux transactions and works across DP bridge chips without requiring additional per chip id checking. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios_dp.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 7712cf5ab33..3623b98ed3f 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -577,30 +577,25 @@ int radeon_dp_get_panel_mode(struct drm_encoder *encoder, struct radeon_device *rdev = dev->dev_private; struct radeon_connector *radeon_connector = to_radeon_connector(connector); int panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; + u16 dp_bridge = radeon_connector_encoder_get_dp_bridge_encoder_id(connector); + u8 tmp; if (!ASIC_IS_DCE4(rdev)) return panel_mode; - if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) == - ENCODER_OBJECT_ID_NUTMEG) - panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE; - else if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) == - ENCODER_OBJECT_ID_TRAVIS) { - u8 id[6]; - int i; - for (i = 0; i < 6; i++) - id[i] = radeon_read_dpcd_reg(radeon_connector, 0x503 + i); - if (id[0] == 0x73 && - id[1] == 0x69 && - id[2] == 0x76 && - id[3] == 0x61 && - id[4] == 0x72 && - id[5] == 0x54) + if (dp_bridge != ENCODER_OBJECT_ID_NONE) { + /* DP bridge chips */ + tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP); + if (tmp & 1) + panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; + else if ((dp_bridge == ENCODER_OBJECT_ID_NUTMEG) || + (dp_bridge == ENCODER_OBJECT_ID_TRAVIS)) panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE; else - panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; + panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; } else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { - u8 tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP); + /* eDP */ + tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP); if (tmp & 1) panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; } -- cgit v1.2.3-70-g09d2 From 4a2b6662c3632176b4fdf012243dd3751367bf1f Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Tue, 28 Aug 2012 16:50:22 -0400 Subject: drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740 It seems some of those IGP dislike non dma32 page despite what documentation says. Fix regression since we allowed non dma32 pages. It seems it only affect some revision of those IGP chips as we don't know which one just force dma32 for all of them. https://bugzilla.redhat.com/show_bug.cgi?id=785375 Signed-off-by: Jerome Glisse Cc: Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index d2e243867ac..33da8bff894 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1051,7 +1051,7 @@ int radeon_device_init(struct radeon_device *rdev, if (rdev->flags & RADEON_IS_AGP) rdev->need_dma32 = true; if ((rdev->flags & RADEON_IS_PCI) && - (rdev->family < CHIP_RS400)) + (rdev->family <= CHIP_RS740)) rdev->need_dma32 = true; dma_bits = rdev->need_dma32 ? 32 : 40; -- cgit v1.2.3-70-g09d2 From f54b350d89bf16d31593b935bafccf510ff4a708 Mon Sep 17 00:00:00 2001 From: Christian König Date: Wed, 29 Aug 2012 13:24:15 +0200 Subject: drm/radeon: fix double free in radeon_gpu_reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit radeon_ring_restore is freeing the memory for the saved ring data. We need to remember that, otherwise we try to restore the ring data again on the next try. Additional to that it shouldn't try the reset infinitely if we have saved ring data. Signed-off-by: Christian König Reviewed-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_device.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 33da8bff894..7a3daebd732 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1346,12 +1346,15 @@ retry: for (i = 0; i < RADEON_NUM_RINGS; ++i) { radeon_ring_restore(rdev, &rdev->ring[i], ring_sizes[i], ring_data[i]); + ring_sizes[i] = 0; + ring_data[i] = NULL; } r = radeon_ib_ring_tests(rdev); if (r) { dev_err(rdev->dev, "ib ring test failed (%d).\n", r); if (saved) { + saved = false; radeon_suspend(rdev); goto retry; } -- cgit v1.2.3-70-g09d2 From 51cd8e6ff265650e35e46b5bcbe2ee381a7a2877 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 28 Aug 2012 19:57:21 -0700 Subject: mm, slab: lock the correct nodelist after reenabling irqs cache_grow() can reenable irqs so the cpu (and node) can change, so ensure that we take list_lock on the correct nodelist. This fixes an issue with commit 072bb0aa5e06 ("mm: sl[au]b: add knowledge of PFMEMALLOC reserve pages") where list_lock for the wrong node was taken after growing the cache. Reported-and-tested-by: Haggai Eran Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds --- mm/slab.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/slab.c b/mm/slab.c index f8b0d539b48..811af03a14e 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -3260,6 +3260,7 @@ force_grow: /* cache_grow can reenable interrupts, then ac could change. */ ac = cpu_cache_get(cachep); + node = numa_mem_id(); /* no objects in sight? abort */ if (!x && (ac->avail == 0 || force_refill)) -- cgit v1.2.3-70-g09d2 From 41fa54377057ab38bc3e08ebb46168a7daf2e63b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 29 Aug 2012 19:48:26 -0400 Subject: drm/radeon: fix dig encoder selection on DCE61 Was using the DCE41 code which was wrong. Fixes blank displays on a number of Trinity systems. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_encoders.c | 31 +++++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index 4a7f95e5550..6e8803a1170 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -1769,13 +1769,34 @@ static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder) struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc); struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_encoder *test_encoder; - struct radeon_encoder_atom_dig *dig; + struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; uint32_t dig_enc_in_use = 0; - /* DCE4/5 */ - if (ASIC_IS_DCE4(rdev)) { - dig = radeon_encoder->enc_priv; - if (ASIC_IS_DCE41(rdev)) { + if (ASIC_IS_DCE6(rdev)) { + /* DCE6 */ + switch (radeon_encoder->encoder_id) { + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: + if (dig->linkb) + return 1; + else + return 0; + break; + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: + if (dig->linkb) + return 3; + else + return 2; + break; + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: + if (dig->linkb) + return 5; + else + return 4; + break; + } + } else if (ASIC_IS_DCE4(rdev)) { + /* DCE4/5 */ + if (ASIC_IS_DCE41(rdev) && !ASIC_IS_DCE61(rdev)) { /* ontario follows DCE4 */ if (rdev->family == CHIP_PALM) { if (dig->linkb) -- cgit v1.2.3-70-g09d2 From 4a68a74ba04e7ccf798d45988f4f2d2131fb5063 Mon Sep 17 00:00:00 2001 From: Forest Bond Date: Mon, 13 Aug 2012 16:31:24 +0000 Subject: gma500: Consider CRTC initially active. [this one ideally should make 3.6 - it fixes the very annoying mode setting bug] This causes the pipe to be forced off prior to initial mode set, which roughly mirrors the behavior of the i915 driver. It fixes initial mode setting on my Intel DN2800MT (Cedarview) board. Without it, mode setting triggers an out-of-range error from the monitor for most modes, but only on initial configuration (i.e. they can be configured successfully from userspace after that). Signed-off-by: Forest Bond Signed-off-by: Alan Cox Cc: stable Signed-off-by: Dave Airlie --- drivers/gpu/drm/gma500/psb_intel_display.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c index 30dc22a7156..8033526bb53 100644 --- a/drivers/gpu/drm/gma500/psb_intel_display.c +++ b/drivers/gpu/drm/gma500/psb_intel_display.c @@ -1362,6 +1362,9 @@ void psb_intel_crtc_init(struct drm_device *dev, int pipe, (struct drm_connector **) (psb_intel_crtc + 1); psb_intel_crtc->mode_set.num_connectors = 0; psb_intel_cursor_init(dev, psb_intel_crtc); + + /* Set to true so that the pipe is forced off on initial config. */ + psb_intel_crtc->active = true; } int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, -- cgit v1.2.3-70-g09d2 From 6f33814bd4d9cfe76033a31b1c0c76c960cd8e4b Mon Sep 17 00:00:00 2001 From: Paul Menzel Date: Wed, 8 Aug 2012 23:12:19 +0200 Subject: drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with vertical stripes in the top half. In commit bc42aabc [2] commit bc42aabc6a01b92b0f961d65671564e0e1cd7592 Author: Adam Jackson Date: Wed May 23 16:26:54 2012 -0400 drm/edid/quirks: ViewSonic VA2026w Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which is also needed for this ASUS monitor. All log files and output from `xrandr` is included in the referenced Bugzilla report #17629. Please note that this monitor only has a VGA (D-Sub) connector [1]. [1] http://www.asus.com/Display/LCD_Monitors/VW222S/ [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629 Signed-off-by: Paul Menzel Cc: Cc: Adam Jackson Cc: Ian Pilcher Cc: Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index a8743c399e8..b7ee230572b 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -87,6 +87,9 @@ static struct edid_quirk { int product_id; u32 quirks; } edid_quirk_list[] = { + /* ASUS VW222S */ + { "ACI", 0x22a2, EDID_QUIRK_FORCE_REDUCED_BLANKING }, + /* Acer AL1706 */ { "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 }, /* Acer F51 */ -- cgit v1.2.3-70-g09d2 From 768fd0737f4533635ea351566dff98fd4912b0d8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 28 Aug 2012 10:02:08 +0200 Subject: s390/32: Don't clobber personality flags on exec In native 32 bit mode the personality flags were not correctly inherited. This is the s390 version of 59e4c3a2 "powerpc/32: Don't clobber personality flags on exec". Reported-by: Mike Frysinger Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/elf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index 32e8449640f..9b94a160fe7 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -180,7 +180,8 @@ extern char elf_platform[]; #define ELF_PLATFORM (elf_platform) #ifndef CONFIG_64BIT -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) +#define SET_PERSONALITY(ex) \ + set_personality(PER_LINUX | (current->personality & (~PER_MASK))) #else /* CONFIG_64BIT */ #define SET_PERSONALITY(ex) \ do { \ -- cgit v1.2.3-70-g09d2 From cee58483cf56e0ba355fdd97ff5e8925329aa936 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 31 Aug 2012 13:30:06 -0400 Subject: time: Move ktime_t overflow checking into timespec_valid_strict Andreas Bombe reported that the added ktime_t overflow checking added to timespec_valid in commit 4e8b14526ca7 ("time: Improve sanity checking of timekeeping inputs") was causing problems with X.org because it caused timeouts larger then KTIME_T to be invalid. Previously, these large timeouts would be clamped to KTIME_MAX and would never expire, which is valid. This patch splits the ktime_t overflow checking into a new timespec_valid_strict function, and converts the timekeeping codes internal checking to use this more strict function. Reported-and-tested-by: Andreas Bombe Cc: Zhouping Liu Cc: Ingo Molnar Cc: Prarit Bhargava Cc: Thomas Gleixner Cc: stable@vger.kernel.org Signed-off-by: John Stultz Signed-off-by: Linus Torvalds --- include/linux/time.h | 7 +++++++ kernel/time/timekeeping.c | 10 +++++----- 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/include/linux/time.h b/include/linux/time.h index b0bbd8f0130..b51e664c83e 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -125,6 +125,13 @@ static inline bool timespec_valid(const struct timespec *ts) /* Can't have more nanoseconds then a second */ if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) return false; + return true; +} + +static inline bool timespec_valid_strict(const struct timespec *ts) +{ + if (!timespec_valid(ts)) + return false; /* Disallow values that could overflow ktime_t */ if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX) return false; diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 0c1485e42be..34e5eac8142 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -428,7 +428,7 @@ int do_settimeofday(const struct timespec *tv) struct timespec ts_delta, xt; unsigned long flags; - if (!timespec_valid(tv)) + if (!timespec_valid_strict(tv)) return -EINVAL; write_seqlock_irqsave(&tk->lock, flags); @@ -476,7 +476,7 @@ int timekeeping_inject_offset(struct timespec *ts) /* Make sure the proposed value is valid */ tmp = timespec_add(tk_xtime(tk), *ts); - if (!timespec_valid(&tmp)) { + if (!timespec_valid_strict(&tmp)) { ret = -EINVAL; goto error; } @@ -659,7 +659,7 @@ void __init timekeeping_init(void) struct timespec now, boot, tmp; read_persistent_clock(&now); - if (!timespec_valid(&now)) { + if (!timespec_valid_strict(&now)) { pr_warn("WARNING: Persistent clock returned invalid value!\n" " Check your CMOS/BIOS settings.\n"); now.tv_sec = 0; @@ -667,7 +667,7 @@ void __init timekeeping_init(void) } read_boot_clock(&boot); - if (!timespec_valid(&boot)) { + if (!timespec_valid_strict(&boot)) { pr_warn("WARNING: Boot clock returned invalid value!\n" " Check your CMOS/BIOS settings.\n"); boot.tv_sec = 0; @@ -713,7 +713,7 @@ static struct timespec timekeeping_suspend_time; static void __timekeeping_inject_sleeptime(struct timekeeper *tk, struct timespec *delta) { - if (!timespec_valid(delta)) { + if (!timespec_valid_strict(delta)) { printk(KERN_WARNING "__timekeeping_inject_sleeptime: Invalid " "sleep delta value!\n"); return; -- cgit v1.2.3-70-g09d2 From 4cbe5a555fa58a79b6ecbb6c531b8bab0650778d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 1 Sep 2012 10:39:58 -0700 Subject: Linux 3.6-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 354026873b1..371ce8899f5 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v1.2.3-70-g09d2 From e93c7d1bc350189511d32cec2f0af79c30e7fa47 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 30 Aug 2012 17:06:15 +0300 Subject: ASoC: omap-mcbsp: Fix compilation error due to leftover code Part of commit (which patches sound/soc/omap/mcbsp.c file): 8fef626 ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code since the tree where it has been applied did not had the earlier patch: d0db84e ASoC: omap-mcbsp: Fix 6pin mux configuration which changed code around omap_mcbsp_6pin_src_mux(). Because of the missing part from 8fef626 the sound/soc/omap/mcbsp.c does not compile in linux-next. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/omap/mcbsp.c | 31 ------------------------------- 1 file changed, 31 deletions(-) diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c index 935ccf63397..bc06175e636 100644 --- a/sound/soc/omap/mcbsp.c +++ b/sound/soc/omap/mcbsp.c @@ -762,37 +762,6 @@ int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id) } -int omap_mcbsp_6pin_src_mux(struct omap_mcbsp *mcbsp, u8 mux) -{ - const char *signal, *src; - - if (!mcbsp->pdata->mux_signal) - return -EINVAL; - - switch (mux) { - case CLKR_SRC_CLKR: - signal = "clkr"; - src = "clkr"; - break; - case CLKR_SRC_CLKX: - signal = "clkr"; - src = "clkx"; - break; - case FSR_SRC_FSR: - signal = "fsr"; - src = "fsr"; - break; - case FSR_SRC_FSX: - signal = "fsr"; - src = "fsx"; - break; - default: - return -EINVAL; - } - - return mcbsp->pdata->mux_signal(mcbsp->dev, signal, src); -} - #define max_thres(m) (mcbsp->pdata->buffer_size) #define valid_threshold(m, val) ((val) <= max_thres(m)) #define THRESHOLD_PROP_BUILDER(prop) \ -- cgit v1.2.3-70-g09d2