From f5a106d9e2a5d947e106c3caace373ded1a695ed Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 27 Jan 2011 17:44:34 +0100 Subject: ARM: 6642/1: mmci: calculate remaining bytes at error correctly The MMCIDATACNT register contain the number of byte left at error not the number of words, so loose the << 2 thing. Further if CRC fails on the first block, we may end up with a negative number of transferred bytes which is not good, and the formula was in wrong order. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 4b8dcd5b2a0..b6fd6dcb41e 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -283,13 +283,13 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, u32 remain, success; /* Calculate how far we are into the transfer */ - remain = readl(host->base + MMCIDATACNT) << 2; + remain = readl(host->base + MMCIDATACNT); success = data->blksz * data->blocks - remain; dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); if (status & MCI_DATACRCFAIL) { /* Last block was not successful */ - host->data_xfered = ((success / data->blksz) - 1 * data->blksz); + host->data_xfered = ((success - 1) / data->blksz) * data->blksz; data->error = -EILSEQ; } else if (status & MCI_DATATIMEOUT) { host->data_xfered = success; -- cgit v1.2.3-70-g09d2 From ccff9b51825b7335889b780bdf7de84ca803e291 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Jan 2011 21:03:50 +0000 Subject: ARM: mmci: complete the transaction on error When we encounter an error, make sure we complete the transaction otherwise we'll leave the request dangling. Acked-by: Linus Walleij Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index b6fd6dcb41e..175a623a6a2 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -319,7 +319,7 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, if (status & MCI_DATABLOCKEND) dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n"); - if (status & MCI_DATAEND) { + if (status & MCI_DATAEND || data->error) { mmci_stop_data(host); if (!data->error) -- cgit v1.2.3-70-g09d2 From 613b152c63e35095a929f9bb80441cbe91ff5e80 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Jan 2011 21:06:53 +0000 Subject: ARM: mmci: round down the bytes transferred on error We should not report incomplete blocks on error. Return the number of bytes successfully transferred, rounded down to the nearest block. Acked-by: Linus Walleij Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 175a623a6a2..2d6de3e03e2 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -289,13 +290,13 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); if (status & MCI_DATACRCFAIL) { /* Last block was not successful */ - host->data_xfered = ((success - 1) / data->blksz) * data->blksz; + host->data_xfered = round_down(success - 1, data->blksz); data->error = -EILSEQ; } else if (status & MCI_DATATIMEOUT) { - host->data_xfered = success; + host->data_xfered = round_down(success, data->blksz); data->error = -ETIMEDOUT; } else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) { - host->data_xfered = success; + host->data_xfered = round_down(success, data->blksz); data->error = -EIO; } -- cgit v1.2.3-70-g09d2 From 5f2c1b30c7f60670c8b9d1cb1ea7c818b9c743a6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Jan 2011 20:57:57 +0000 Subject: ARM: footbridge: fix debug macros 0ea1293 (arm: return both physical and virtual addresses from addruart) changed the way the 'addruart' worked, making it return both the virt and phys addresses. Unfortunately, for footbridge, these were reversed. Fix that. Tested on Netwinder. Signed-off-by: Russell King --- arch/arm/mach-footbridge/include/mach/debug-macro.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 3c9e0c40c67..30b971d6581 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -17,8 +17,8 @@ /* For NetWinder debugging */ .macro addruart, rp, rv mov \rp, #0x000003f8 - orr \rv, \rp, #0x7c000000 @ physical - orr \rp, \rp, #0xff000000 @ virtual + orr \rv, \rp, #0xff000000 @ virtual + orr \rp, \rp, #0x7c000000 @ physical .endm #define UART_SHIFT 0 -- cgit v1.2.3-70-g09d2 From b0a2679d27408d97ce31e5f800b44227d3388b84 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Jan 2011 11:21:05 +0000 Subject: ARM: initrd: disable initrd if passed address overlaps reserved region Disable the initrd if the passed address already overlaps the reserved region. This avoids oopses on Netwinders when NeTTrom tells the kernel that an initrd is located at mem+4MB, but this overlaps the BSS, resulting in the kernels in-use BSS being freed. This should be applied to v2.6.37-stable. Cc: Signed-off-by: Russell King --- arch/arm/mm/init.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 5164069ced4..cddd684364d 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -297,6 +297,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) memblock_reserve(__pa(_stext), _end - _stext); #endif #ifdef CONFIG_BLK_DEV_INITRD + if (phys_initrd_size && + memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) { + pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n", + phys_initrd_start, phys_initrd_size); + phys_initrd_start = phys_initrd_size = 0; + } if (phys_initrd_size) { memblock_reserve(phys_initrd_start, phys_initrd_size); -- cgit v1.2.3-70-g09d2 From c1928022ef94662a88329e35fa0968b1be328b8e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Jan 2011 11:29:40 +0000 Subject: ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+ Ensure that the ISA/PCI IO space accessors are properly ordered on ARMv6+ architectures. These should always be ordered with respect to all other accesses. This also fixes __iormb() and __iowmb() not being visible to ioread/ iowrite if a platform defines its own MMIO accessors. Signed-off-by: Russell King --- arch/arm/include/asm/io.h | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 20e0f7c9e03..d66605dea55 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -95,6 +95,15 @@ static inline void __iomem *__typesafe_io(unsigned long addr) return (void __iomem *)addr; } +/* IO barriers */ +#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE +#define __iormb() rmb() +#define __iowmb() wmb() +#else +#define __iormb() do { } while (0) +#define __iowmb() do { } while (0) +#endif + /* * Now, pick up the machine-defined IO definitions */ @@ -125,17 +134,17 @@ static inline void __iomem *__typesafe_io(unsigned long addr) * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. */ #ifdef __io -#define outb(v,p) __raw_writeb(v,__io(p)) -#define outw(v,p) __raw_writew((__force __u16) \ - cpu_to_le16(v),__io(p)) -#define outl(v,p) __raw_writel((__force __u32) \ - cpu_to_le32(v),__io(p)) +#define outb(v,p) ({ __iowmb(); __raw_writeb(v,__io(p)); }) +#define outw(v,p) ({ __iowmb(); __raw_writew((__force __u16) \ + cpu_to_le16(v),__io(p)); }) +#define outl(v,p) ({ __iowmb(); __raw_writel((__force __u32) \ + cpu_to_le32(v),__io(p)); }) -#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __v; }) +#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __iormb(); __v; }) #define inw(p) ({ __u16 __v = le16_to_cpu((__force __le16) \ - __raw_readw(__io(p))); __v; }) + __raw_readw(__io(p))); __iormb(); __v; }) #define inl(p) ({ __u32 __v = le32_to_cpu((__force __le32) \ - __raw_readl(__io(p))); __v; }) + __raw_readl(__io(p))); __iormb(); __v; }) #define outsb(p,d,l) __raw_writesb(__io(p),d,l) #define outsw(p,d,l) __raw_writesw(__io(p),d,l) @@ -192,14 +201,6 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define writel_relaxed(v,c) ((void)__raw_writel((__force u32) \ cpu_to_le32(v),__mem_pci(c))) -#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE -#define __iormb() rmb() -#define __iowmb() wmb() -#else -#define __iormb() do { } while (0) -#define __iowmb() do { } while (0) -#endif - #define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; }) #define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; }) #define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; }) -- cgit v1.2.3-70-g09d2 From e98ff0f55a0232b578c9aa7f1c245868277ac7bc Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Jan 2011 16:40:20 +0000 Subject: ARM: smp_on_up: allow non-ARM SMP processors Allow non-ARM SMP processors to use the SMP_ON_UP feature. CPUs supporting SMP must have the new CPU ID format, so check for this first. Then check for ARM11MPCore, which fails the MPIDR check. Lastly check the MPIDR reports multiprocessing extensions and that the CPU is part of a multiprocessing system. Cc: Reported-and-Tested-by: Stephen Boyd Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/head.S | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index f17d9a09e8f..c0225da3fb2 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -392,24 +392,22 @@ ENDPROC(__turn_mmu_on) #ifdef CONFIG_SMP_ON_UP __fixup_smp: - mov r4, #0x00070000 - orr r3, r4, #0xff000000 @ mask 0xff070000 - orr r4, r4, #0x41000000 @ val 0x41070000 - and r0, r9, r3 - teq r0, r4 @ ARM CPU and ARMv6/v7? + and r3, r9, #0x000f0000 @ architecture version + teq r3, #0x000f0000 @ CPU ID supported? bne __fixup_smp_on_up @ no, assume UP - orr r3, r3, #0x0000ff00 - orr r3, r3, #0x000000f0 @ mask 0xff07fff0 + bic r3, r9, #0x00ff0000 + bic r3, r3, #0x0000000f @ mask 0xff00fff0 + mov r4, #0x41000000 orr r4, r4, #0x0000b000 - orr r4, r4, #0x00000020 @ val 0x4107b020 - and r0, r9, r3 - teq r0, r4 @ ARM 11MPCore? + orr r4, r4, #0x00000020 @ val 0x4100b020 + teq r3, r4 @ ARM 11MPCore? moveq pc, lr @ yes, assume SMP mrc p15, 0, r0, c0, c0, 5 @ read MPIDR - tst r0, #1 << 31 - movne pc, lr @ bit 31 => SMP + and r0, r0, #0xc0000000 @ multiprocessing extensions and + teq r0, #0x80000000 @ not part of a uniprocessor system? + moveq pc, lr @ yes, assume SMP __fixup_smp_on_up: adr r0, 1f -- cgit v1.2.3-70-g09d2