From 67252287871113deba96adf7e4df1752f3f08688 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 11 Jun 2013 13:18:15 +0100 Subject: regmap: Add regmap_field APIs It is common to access regmap registers at bit level, using regmap_update_bits or regmap_read functions, however the end user has to take care of a mask or shifting. This becomes overhead when such use cases are high. Having a common function to do this is much convenient and less error prone. The idea of regmap_field is simple, regmap_field gives a logical structure to bits of the regmap register, and the driver can use this logical entity without the knowledge of the bit positions and masks all over the code. This way code looks much neat and it need not handle the masks, shifts every time it access the those entities. With this new regmap_field_read/write apis the end user can setup a regmap field using regmap_field_init and use the return regmap_field to read write the register field without worrying about the masks or shifts. Also this apis will be useful for drivers which are based on regmaps, like some clocks or pinctrls which can work on the regmap_fields directly without having to worry about bit positions. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- drivers/base/regmap/internal.h | 8 +++ drivers/base/regmap/regmap.c | 130 +++++++++++++++++++++++++++++++++++++++++ include/linux/regmap.h | 31 ++++++++++ 3 files changed, 169 insertions(+) diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h index c130536e0ab..c5f6ebd0466 100644 --- a/drivers/base/regmap/internal.h +++ b/drivers/base/regmap/internal.h @@ -174,6 +174,14 @@ struct regmap_range_node { unsigned int window_len; }; +struct regmap_field { + struct regmap *regmap; + unsigned int mask; + /* lsb */ + unsigned int shift; + unsigned int reg; +}; + #ifdef CONFIG_DEBUG_FS extern void regmap_debugfs_initcall(void); extern void regmap_debugfs_init(struct regmap *map, const char *name); diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index a941dcfe759..fef6f13b96b 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -801,6 +801,95 @@ struct regmap *devm_regmap_init(struct device *dev, } EXPORT_SYMBOL_GPL(devm_regmap_init); +static void regmap_field_init(struct regmap_field *rm_field, + struct regmap *regmap, struct reg_field reg_field) +{ + int field_bits = reg_field.msb - reg_field.lsb + 1; + rm_field->regmap = regmap; + rm_field->reg = reg_field.reg; + rm_field->shift = reg_field.lsb; + rm_field->mask = ((BIT(field_bits) - 1) << reg_field.lsb); +} + +/** + * devm_regmap_field_alloc(): Allocate and initialise a register field + * in a register map. + * + * @dev: Device that will be interacted with + * @regmap: regmap bank in which this register field is located. + * @reg_field: Register field with in the bank. + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap_field. The regmap_field will be automatically freed + * by the device management code. + */ +struct regmap_field *devm_regmap_field_alloc(struct device *dev, + struct regmap *regmap, struct reg_field reg_field) +{ + struct regmap_field *rm_field = devm_kzalloc(dev, + sizeof(*rm_field), GFP_KERNEL); + if (!rm_field) + return ERR_PTR(-ENOMEM); + + regmap_field_init(rm_field, regmap, reg_field); + + return rm_field; + +} +EXPORT_SYMBOL_GPL(devm_regmap_field_alloc); + +/** + * devm_regmap_field_free(): Free register field allocated using + * devm_regmap_field_alloc. Usally drivers need not call this function, + * as the memory allocated via devm will be freed as per device-driver + * life-cyle. + * + * @dev: Device that will be interacted with + * @field: regmap field which should be freed. + */ +void devm_regmap_field_free(struct device *dev, + struct regmap_field *field) +{ + devm_kfree(dev, field); +} +EXPORT_SYMBOL_GPL(devm_regmap_field_free); + +/** + * regmap_field_alloc(): Allocate and initialise a register field + * in a register map. + * + * @regmap: regmap bank in which this register field is located. + * @reg_field: Register field with in the bank. + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap_field. The regmap_field should be freed by the + * user once its finished working with it using regmap_field_free(). + */ +struct regmap_field *regmap_field_alloc(struct regmap *regmap, + struct reg_field reg_field) +{ + struct regmap_field *rm_field = kzalloc(sizeof(*rm_field), GFP_KERNEL); + + if (!rm_field) + return ERR_PTR(-ENOMEM); + + regmap_field_init(rm_field, regmap, reg_field); + + return rm_field; +} +EXPORT_SYMBOL_GPL(regmap_field_alloc); + +/** + * regmap_field_free(): Free register field allocated using regmap_field_alloc + * + * @field: regmap field which should be freed. + */ +void regmap_field_free(struct regmap_field *field) +{ + kfree(field); +} +EXPORT_SYMBOL_GPL(regmap_field_free); + /** * regmap_reinit_cache(): Reinitialise the current register cache * @@ -1249,6 +1338,22 @@ int regmap_raw_write(struct regmap *map, unsigned int reg, } EXPORT_SYMBOL_GPL(regmap_raw_write); +/** + * regmap_field_write(): Write a value to a single register field + * + * @field: Register field to write to + * @val: Value to be written + * + * A value of zero will be returned on success, a negative errno will + * be returned in error cases. + */ +int regmap_field_write(struct regmap_field *field, unsigned int val) +{ + return regmap_update_bits(field->regmap, field->reg, + field->mask, val << field->shift); +} +EXPORT_SYMBOL_GPL(regmap_field_write); + /* * regmap_bulk_write(): Write multiple registers to the device * @@ -1531,6 +1636,31 @@ int regmap_raw_read(struct regmap *map, unsigned int reg, void *val, } EXPORT_SYMBOL_GPL(regmap_raw_read); +/** + * regmap_field_read(): Read a value to a single register field + * + * @field: Register field to read from + * @val: Pointer to store read value + * + * A value of zero will be returned on success, a negative errno will + * be returned in error cases. + */ +int regmap_field_read(struct regmap_field *field, unsigned int *val) +{ + int ret; + unsigned int reg_val; + ret = regmap_read(field->regmap, field->reg, ®_val); + if (ret != 0) + return ret; + + reg_val &= field->mask; + reg_val >>= field->shift; + *val = reg_val; + + return ret; +} +EXPORT_SYMBOL_GPL(regmap_field_read); + /** * regmap_bulk_read(): Read multiple registers from the device * diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 02d84e24b7c..eebea9b5f43 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -23,6 +23,7 @@ struct irq_domain; struct spi_device; struct regmap; struct regmap_range_cfg; +struct regmap_field; /* An enum of all the supported cache types */ enum regcache_type { @@ -411,6 +412,36 @@ bool regmap_reg_in_ranges(unsigned int reg, const struct regmap_range *ranges, unsigned int nranges); +/** + * Description of an register field + * + * @reg: Offset of the register within the regmap bank + * @lsb: lsb of the register field. + * @reg: msb of the register field. + */ +struct reg_field { + unsigned int reg; + unsigned int lsb; + unsigned int msb; +}; + +#define REG_FIELD(_reg, _lsb, _msb) { \ + .reg = _reg, \ + .lsb = _lsb, \ + .msb = _msb, \ + } + +struct regmap_field *regmap_field_alloc(struct regmap *regmap, + struct reg_field reg_field); +void regmap_field_free(struct regmap_field *field); + +struct regmap_field *devm_regmap_field_alloc(struct device *dev, + struct regmap *regmap, struct reg_field reg_field); +void devm_regmap_field_free(struct device *dev, struct regmap_field *field); + +int regmap_field_read(struct regmap_field *field, unsigned int *val); +int regmap_field_write(struct regmap_field *field, unsigned int val); + /** * Description of an IRQ for the generic regmap irq_chip. * -- cgit v1.2.3-70-g09d2 From 701016c0cba594d5dbd26652ed1e52b0fe2926fd Mon Sep 17 00:00:00 2001 From: Srinivas KANDAGATLA Date: Thu, 20 Jun 2013 15:05:38 +0100 Subject: pinctrl: st: Add pinctrl and pinconf support. This patch add pinctrl support to ST SoCs. About hardware: ST Set-Top-Box parts have two blocks called PIO and PIO-mux which handle pin configurations. Each multi-function pin is controlled, driven and routed through the PIO multiplexing block. Each pin supports GPIO functionality (ALT0) and multiple alternate functions(ALT1 - ALTx) that directly connect the pin to different hardware blocks. When a pin is in GPIO mode, Output Enable (OE), Open Drain(OD), and Pull Up (PU) are driven by the related PIO block. Otherwise the PIO multiplexing block configures these parameters and retiming the signal. About driver: This pinctrl driver manages both PIO and PIO-mux block using pinctrl, pinconf, pinmux, gpio subsystems. All the pinctrl related config information can only come from device trees. Signed-off-by: Srinivas Kandagatla Acked-by: Linus Walleij Signed-off-by: Mark Brown --- .../devicetree/bindings/pinctrl/pinctrl-st.txt | 110 ++ drivers/pinctrl/Kconfig | 6 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-st.c | 1403 ++++++++++++++++++++ 4 files changed, 1520 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt create mode 100644 drivers/pinctrl/pinctrl-st.c diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt new file mode 100644 index 00000000000..05bf82a07df --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt @@ -0,0 +1,110 @@ +*ST pin controller. + +Each multi-function pin is controlled, driven and routed through the +PIO multiplexing block. Each pin supports GPIO functionality (ALT0) +and multiple alternate functions(ALT1 - ALTx) that directly connect +the pin to different hardware blocks. + +When a pin is in GPIO mode, Output Enable (OE), Open Drain(OD), and +Pull Up (PU) are driven by the related PIO block. + +ST pinctrl driver controls PIO multiplexing block and also interacts with +gpio driver to configure a pin. + +Required properties: (PIO multiplexing block) +- compatible : should be "st,--pinctrl" + like st,stih415-sbc-pinctrl, st,stih415-front-pinctrl and so on. +- gpio-controller : Indicates this device is a GPIO controller +- #gpio-cells : Should be one. The first cell is the pin number. +- st,retime-pin-mask : Should be mask to specify which pins can be retimed. + If the property is not present, it is assumed that all the pins in the + bank are capable of retiming. Retiming is mainly used to improve the + IO timing margins of external synchronous interfaces. +- st,bank-name : Should be a name string for this bank as + specified in datasheet. +- st,syscfg : Should be a phandle of the syscfg node. + +Example: + pin-controller-sbc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih415-sbc-pinctrl"; + st,syscfg = <&syscfg_sbc>; + ranges = <0 0xfe610000 0x5000>; + PIO0: gpio@fe610000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0 0x100>; + st,bank-name = "PIO0"; + }; + ... + pin-functions nodes follow... + }; + + +Contents of function subnode node: +---------------------- +Required properties for pin configuration node: +- st,pins : Child node with list of pins with configuration. + +Below is the format of how each pin conf should look like. + + + +Every PIO is represented with 4-7 parameters depending on retime configuration. +Each parameter is explained as below. + +-bank : Should be bank phandle to which this PIO belongs. +-offset : Offset in the PIO bank. +-mux : Should be alternate function number associated this pin. + Use same numbers from datasheet. +-mode :pin configuration is selected from one of the below values. + IN + IN_PU + OUT + BIDIR + BIDIR_PU + +-rt_type Retiming Configuration for the pin. + Possible retime configuration are: + + ------- ------------- + value args + ------- ------------- + NICLK + ICLK_IO + BYPASS + DE_IO + SE_ICLK_IO + SE_NICLK_IO + +- delay is retime delay in pico seconds as mentioned in data sheet. + +- rt_clk :clk to be use for retime. + Possible values are: + CLK_A + CLK_B + CLK_C + CLK_D + +Example of mmcclk pin which is a bi-direction pull pu with retime config +as non inverted clock retimed with CLK_B and delay of 0 pico seconds: + +pin-controller { + ... + mmc0 { + pinctrl_mmc: mmc { + st,pins { + mmcclk = <&PIO13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>; + ... + }; + }; + ... + }; +}; + +sdhci0:sdhci@fe810000{ + ... + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc>; +}; diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 8f669243814..1a147cf821f 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -169,6 +169,12 @@ config PINCTRL_SUNXI select PINMUX select GENERIC_PINCONF +config PINCTRL_ST + bool + depends on OF + select PINMUX + select PINCONF + config PINCTRL_TEGRA bool select PINMUX diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 9bdaeb8785c..6fc78445d0f 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinctrl-exynos5440.o obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o +obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/ diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c new file mode 100644 index 00000000000..7effedfd476 --- /dev/null +++ b/drivers/pinctrl/pinctrl-st.c @@ -0,0 +1,1403 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Authors: + * Srinivas Kandagatla + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "core.h" + +/* PIO Block registers */ +/* PIO output */ +#define REG_PIO_POUT 0x00 +/* Set bits of POUT */ +#define REG_PIO_SET_POUT 0x04 +/* Clear bits of POUT */ +#define REG_PIO_CLR_POUT 0x08 +/* PIO input */ +#define REG_PIO_PIN 0x10 +/* PIO configuration */ +#define REG_PIO_PC(n) (0x20 + (n) * 0x10) +/* Set bits of PC[2:0] */ +#define REG_PIO_SET_PC(n) (0x24 + (n) * 0x10) +/* Clear bits of PC[2:0] */ +#define REG_PIO_CLR_PC(n) (0x28 + (n) * 0x10) +/* PIO input comparison */ +#define REG_PIO_PCOMP 0x50 +/* Set bits of PCOMP */ +#define REG_PIO_SET_PCOMP 0x54 +/* Clear bits of PCOMP */ +#define REG_PIO_CLR_PCOMP 0x58 +/* PIO input comparison mask */ +#define REG_PIO_PMASK 0x60 +/* Set bits of PMASK */ +#define REG_PIO_SET_PMASK 0x64 +/* Clear bits of PMASK */ +#define REG_PIO_CLR_PMASK 0x68 + +#define ST_GPIO_DIRECTION_BIDIR 0x1 +#define ST_GPIO_DIRECTION_OUT 0x2 +#define ST_GPIO_DIRECTION_IN 0x4 + +/** + * Packed style retime configuration. + * There are two registers cfg0 and cfg1 in this style for each bank. + * Each field in this register is 8 bit corresponding to 8 pins in the bank. + */ +#define RT_P_CFGS_PER_BANK 2 +#define RT_P_CFG0_CLK1NOTCLK0_FIELD(reg) REG_FIELD(reg, 0, 7) +#define RT_P_CFG0_DELAY_0_FIELD(reg) REG_FIELD(reg, 16, 23) +#define RT_P_CFG0_DELAY_1_FIELD(reg) REG_FIELD(reg, 24, 31) +#define RT_P_CFG1_INVERTCLK_FIELD(reg) REG_FIELD(reg, 0, 7) +#define RT_P_CFG1_RETIME_FIELD(reg) REG_FIELD(reg, 8, 15) +#define RT_P_CFG1_CLKNOTDATA_FIELD(reg) REG_FIELD(reg, 16, 23) +#define RT_P_CFG1_DOUBLE_EDGE_FIELD(reg) REG_FIELD(reg, 24, 31) + +/** + * Dedicated style retime Configuration register + * each register is dedicated per pin. + */ +#define RT_D_CFGS_PER_BANK 8 +#define RT_D_CFG_CLK_SHIFT 0 +#define RT_D_CFG_CLK_MASK (0x3 << 0) +#define RT_D_CFG_CLKNOTDATA_SHIFT 2 +#define RT_D_CFG_CLKNOTDATA_MASK BIT(2) +#define RT_D_CFG_DELAY_SHIFT 3 +#define RT_D_CFG_DELAY_MASK (0xf << 3) +#define RT_D_CFG_DELAY_INNOTOUT_SHIFT 7 +#define RT_D_CFG_DELAY_INNOTOUT_MASK BIT(7) +#define RT_D_CFG_DOUBLE_EDGE_SHIFT 8 +#define RT_D_CFG_DOUBLE_EDGE_MASK BIT(8) +#define RT_D_CFG_INVERTCLK_SHIFT 9 +#define RT_D_CFG_INVERTCLK_MASK BIT(9) +#define RT_D_CFG_RETIME_SHIFT 10 +#define RT_D_CFG_RETIME_MASK BIT(10) + +/* + * Pinconf is represented in an opaque unsigned long variable. + * Below is the bit allocation details for each possible configuration. + * All the bit fields can be encapsulated into four variables + * (direction, retime-type, retime-clk, retime-delay) + * + * +----------------+ + *[31:28]| reserved-3 | + * +----------------+------------- + *[27] | oe | | + * +----------------+ v + *[26] | pu | [Direction ] + * +----------------+ ^ + *[25] | od | | + * +----------------+------------- + *[24] | reserved-2 | + * +----------------+------------- + *[23] | retime | | + * +----------------+ | + *[22] | retime-invclk | | + * +----------------+ v + *[21] |retime-clknotdat| [Retime-type ] + * +----------------+ ^ + *[20] | retime-de | | + * +----------------+------------- + *[19:18]| retime-clk |------>[Retime-Clk ] + * +----------------+ + *[17:16]| reserved-1 | + * +----------------+ + *[15..0]| retime-delay |------>[Retime Delay] + * +----------------+ + */ + +#define ST_PINCONF_UNPACK(conf, param)\ + ((conf >> ST_PINCONF_ ##param ##_SHIFT) \ + & ST_PINCONF_ ##param ##_MASK) + +#define ST_PINCONF_PACK(conf, val, param) (conf |=\ + ((val & ST_PINCONF_ ##param ##_MASK) << \ + ST_PINCONF_ ##param ##_SHIFT)) + +/* Output enable */ +#define ST_PINCONF_OE_MASK 0x1 +#define ST_PINCONF_OE_SHIFT 27 +#define ST_PINCONF_OE BIT(27) +#define ST_PINCONF_UNPACK_OE(conf) ST_PINCONF_UNPACK(conf, OE) +#define ST_PINCONF_PACK_OE(conf) ST_PINCONF_PACK(conf, 1, OE) + +/* Pull Up */ +#define ST_PINCONF_PU_MASK 0x1 +#define ST_PINCONF_PU_SHIFT 26 +#define ST_PINCONF_PU BIT(26) +#define ST_PINCONF_UNPACK_PU(conf) ST_PINCONF_UNPACK(conf, PU) +#define ST_PINCONF_PACK_PU(conf) ST_PINCONF_PACK(conf, 1, PU) + +/* Open Drain */ +#define ST_PINCONF_OD_MASK 0x1 +#define ST_PINCONF_OD_SHIFT 25 +#define ST_PINCONF_OD BIT(25) +#define ST_PINCONF_UNPACK_OD(conf) ST_PINCONF_UNPACK(conf, OD) +#define ST_PINCONF_PACK_OD(conf) ST_PINCONF_PACK(conf, 1, OD) + +#define ST_PINCONF_RT_MASK 0x1 +#define ST_PINCONF_RT_SHIFT 23 +#define ST_PINCONF_RT BIT(23) +#define ST_PINCONF_UNPACK_RT(conf) ST_PINCONF_UNPACK(conf, RT) +#define ST_PINCONF_PACK_RT(conf) ST_PINCONF_PACK(conf, 1, RT) + +#define ST_PINCONF_RT_INVERTCLK_MASK 0x1 +#define ST_PINCONF_RT_INVERTCLK_SHIFT 22 +#define ST_PINCONF_RT_INVERTCLK BIT(22) +#define ST_PINCONF_UNPACK_RT_INVERTCLK(conf) \ + ST_PINCONF_UNPACK(conf, RT_INVERTCLK) +#define ST_PINCONF_PACK_RT_INVERTCLK(conf) \ + ST_PINCONF_PACK(conf, 1, RT_INVERTCLK) + +#define ST_PINCONF_RT_CLKNOTDATA_MASK 0x1 +#define ST_PINCONF_RT_CLKNOTDATA_SHIFT 21 +#define ST_PINCONF_RT_CLKNOTDATA BIT(21) +#define ST_PINCONF_UNPACK_RT_CLKNOTDATA(conf) \ + ST_PINCONF_UNPACK(conf, RT_CLKNOTDATA) +#define ST_PINCONF_PACK_RT_CLKNOTDATA(conf) \ + ST_PINCONF_PACK(conf, 1, RT_CLKNOTDATA) + +#define ST_PINCONF_RT_DOUBLE_EDGE_MASK 0x1 +#define ST_PINCONF_RT_DOUBLE_EDGE_SHIFT 20 +#define ST_PINCONF_RT_DOUBLE_EDGE BIT(20) +#define ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(conf) \ + ST_PINCONF_UNPACK(conf, RT_DOUBLE_EDGE) +#define ST_PINCONF_PACK_RT_DOUBLE_EDGE(conf) \ + ST_PINCONF_PACK(conf, 1, RT_DOUBLE_EDGE) + +#define ST_PINCONF_RT_CLK_MASK 0x3 +#define ST_PINCONF_RT_CLK_SHIFT 18 +#define ST_PINCONF_RT_CLK BIT(18) +#define ST_PINCONF_UNPACK_RT_CLK(conf) ST_PINCONF_UNPACK(conf, RT_CLK) +#define ST_PINCONF_PACK_RT_CLK(conf, val) ST_PINCONF_PACK(conf, val, RT_CLK) + +/* RETIME_DELAY in Pico Secs */ +#define ST_PINCONF_RT_DELAY_MASK 0xffff +#define ST_PINCONF_RT_DELAY_SHIFT 0 +#define ST_PINCONF_UNPACK_RT_DELAY(conf) ST_PINCONF_UNPACK(conf, RT_DELAY) +#define ST_PINCONF_PACK_RT_DELAY(conf, val) \ + ST_PINCONF_PACK(conf, val, RT_DELAY) + +#define ST_GPIO_PINS_PER_BANK (8) +#define OF_GPIO_ARGS_MIN (4) +#define OF_RT_ARGS_MIN (2) + +#define gpio_range_to_bank(chip) \ + container_of(chip, struct st_gpio_bank, range) + +#define gpio_chip_to_bank(chip) \ + container_of(chip, struct st_gpio_bank, gpio_chip) + + +enum st_retime_style { + st_retime_style_none, + st_retime_style_packed, + st_retime_style_dedicated, +}; + +struct st_retime_dedicated { + struct regmap_field *rt[ST_GPIO_PINS_PER_BANK]; +}; + +struct st_retime_packed { + struct regmap_field *clk1notclk0; + struct regmap_field *delay_0; + struct regmap_field *delay_1; + struct regmap_field *invertclk; + struct regmap_field *retime; + struct regmap_field *clknotdata; + struct regmap_field *double_edge; +}; + +struct st_pio_control { + u32 rt_pin_mask; + struct regmap_field *alt, *oe, *pu, *od; + /* retiming */ + union { + struct st_retime_packed rt_p; + struct st_retime_dedicated rt_d; + } rt; +}; + +struct st_pctl_data { + enum st_retime_style rt_style; + unsigned int *input_delays; + int ninput_delays; + unsigned int *output_delays; + int noutput_delays; + /* register offset information */ + int alt, oe, pu, od, rt; +}; + +struct st_pinconf { + int pin; + const char *name; + unsigned long config; + int altfunc; +}; + +struct st_pmx_func { + const char *name; + const char **groups; + unsigned ngroups; +}; + +struct st_pctl_group { + const char *name; + unsigned int *pins; + unsigned npins; + struct st_pinconf *pin_conf; +}; + +struct st_gpio_bank { + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range range; + void __iomem *base; + struct st_pio_control pc; +}; + +struct st_pinctrl { + struct device *dev; + struct pinctrl_dev *pctl; + struct st_gpio_bank *banks; + int nbanks; + struct st_pmx_func *functions; + int nfunctions; + struct st_pctl_group *groups; + int ngroups; + struct regmap *regmap; + const struct st_pctl_data *data; +}; + +/* SOC specific data */ +/* STiH415 data */ +unsigned int stih415_input_delays[] = {0, 500, 1000, 1500}; +unsigned int stih415_output_delays[] = {0, 1000, 2000, 3000}; + +#define STIH415_PCTRL_COMMON_DATA \ + .rt_style = st_retime_style_packed, \ + .input_delays = stih415_input_delays, \ + .ninput_delays = 4, \ + .output_delays = stih415_output_delays, \ + .noutput_delays = 4 + +static const struct st_pctl_data stih415_sbc_data = { + STIH415_PCTRL_COMMON_DATA, + .alt = 0, .oe = 5, .pu = 7, .od = 9, .rt = 16, +}; + +static const struct st_pctl_data stih415_front_data = { + STIH415_PCTRL_COMMON_DATA, + .alt = 0, .oe = 8, .pu = 10, .od = 12, .rt = 16, +}; + +static const struct st_pctl_data stih415_rear_data = { + STIH415_PCTRL_COMMON_DATA, + .alt = 0, .oe = 6, .pu = 8, .od = 10, .rt = 38, +}; + +static const struct st_pctl_data stih415_left_data = { + STIH415_PCTRL_COMMON_DATA, + .alt = 0, .oe = 3, .pu = 4, .od = 5, .rt = 6, +}; + +static const struct st_pctl_data stih415_right_data = { + STIH415_PCTRL_COMMON_DATA, + .alt = 0, .oe = 5, .pu = 7, .od = 9, .rt = 11, +}; + +/* STiH416 data */ +unsigned int stih416_delays[] = {0, 300, 500, 750, 1000, 1250, 1500, + 1750, 2000, 2250, 2500, 2750, 3000, 3250 }; + +static const struct st_pctl_data stih416_data = { + .rt_style = st_retime_style_dedicated, + .input_delays = stih416_delays, + .ninput_delays = 14, + .output_delays = stih416_delays, + .noutput_delays = 14, + .alt = 0, .oe = 40, .pu = 50, .od = 60, .rt = 100, +}; + +/* Low level functions.. */ +static inline int st_gpio_bank(int gpio) +{ + return gpio/ST_GPIO_PINS_PER_BANK; +} + +static inline int st_gpio_pin(int gpio) +{ + return gpio%ST_GPIO_PINS_PER_BANK; +} + +static void st_pinconf_set_config(struct st_pio_control *pc, + int pin, unsigned long config) +{ + struct regmap_field *output_enable = pc->oe; + struct regmap_field *pull_up = pc->pu; + struct regmap_field *open_drain = pc->od; + unsigned int oe_value, pu_value, od_value; + unsigned long mask = BIT(pin); + + regmap_field_read(output_enable, &oe_value); + regmap_field_read(pull_up, &pu_value); + regmap_field_read(open_drain, &od_value); + + /* Clear old values */ + oe_value &= ~mask; + pu_value &= ~mask; + od_value &= ~mask; + + if (config & ST_PINCONF_OE) + oe_value |= mask; + if (config & ST_PINCONF_PU) + pu_value |= mask; + if (config & ST_PINCONF_OD) + od_value |= mask; + + regmap_field_write(output_enable, oe_value); + regmap_field_write(pull_up, pu_value); + regmap_field_write(open_drain, od_value); +} + +static void st_pctl_set_function(struct st_pio_control *pc, + int pin_id, int function) +{ + struct regmap_field *alt = pc->alt; + unsigned int val; + int pin = st_gpio_pin(pin_id); + int offset = pin * 4; + + regmap_field_read(alt, &val); + val &= ~(0xf << offset); + val |= function << offset; + regmap_field_write(alt, val); +} + +static unsigned long st_pinconf_delay_to_bit(unsigned int delay, + const struct st_pctl_data *data, unsigned long config) +{ + unsigned int *delay_times; + int num_delay_times, i, closest_index = -1; + unsigned int closest_divergence = UINT_MAX; + + if (ST_PINCONF_UNPACK_OE(config)) { + delay_times = data->output_delays; + num_delay_times = data->noutput_delays; + } else { + delay_times = data->input_delays; + num_delay_times = data->ninput_delays; + } + + for (i = 0; i < num_delay_times; i++) { + unsigned int divergence = abs(delay - delay_times[i]); + + if (divergence == 0) + return i; + + if (divergence < closest_divergence) { + closest_divergence = divergence; + closest_index = i; + } + } + + pr_warn("Attempt to set delay %d, closest available %d\n", + delay, delay_times[closest_index]); + + return closest_index; +} + +static unsigned long st_pinconf_bit_to_delay(unsigned int index, + const struct st_pctl_data *data, unsigned long output) +{ + unsigned int *delay_times; + int num_delay_times; + + if (output) { + delay_times = data->output_delays; + num_delay_times = data->noutput_delays; + } else { + delay_times = data->input_delays; + num_delay_times = data->ninput_delays; + } + + if (index < num_delay_times) { + return delay_times[index]; + } else { + pr_warn("Delay not found in/out delay list\n"); + return 0; + } +} + +static void st_regmap_field_bit_set_clear_pin(struct regmap_field *field, + int enable, int pin) +{ + unsigned int val = 0; + + regmap_field_read(field, &val); + if (enable) + val |= BIT(pin); + else + val &= ~BIT(pin); + regmap_field_write(field, val); +} + +static void st_pinconf_set_retime_packed(struct st_pinctrl *info, + struct st_pio_control *pc, unsigned long config, int pin) +{ + const struct st_pctl_data *data = info->data; + struct st_retime_packed *rt_p = &pc->rt.rt_p; + unsigned int delay; + + st_regmap_field_bit_set_clear_pin(rt_p->clk1notclk0, + ST_PINCONF_UNPACK_RT_CLK(config), pin); + + st_regmap_field_bit_set_clear_pin(rt_p->clknotdata, + ST_PINCONF_UNPACK_RT_CLKNOTDATA(config), pin); + + st_regmap_field_bit_set_clear_pin(rt_p->double_edge, + ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config), pin); + + st_regmap_field_bit_set_clear_pin(rt_p->invertclk, + ST_PINCONF_UNPACK_RT_INVERTCLK(config), pin); + + st_regmap_field_bit_set_clear_pin(rt_p->retime, + ST_PINCONF_UNPACK_RT(config), pin); + + delay = st_pinconf_delay_to_bit(ST_PINCONF_UNPACK_RT_DELAY(config), + data, config); + /* 2 bit delay, lsb */ + st_regmap_field_bit_set_clear_pin(rt_p->delay_0, delay & 0x1, pin); + /* 2 bit delay, msb */ + st_regmap_field_bit_set_clear_pin(rt_p->delay_1, delay & 0x2, pin); + +} + +static void st_pinconf_set_retime_dedicated(struct st_pinctrl *info, + struct st_pio_control *pc, unsigned long config, int pin) +{ + int input = ST_PINCONF_UNPACK_OE(config) ? 0 : 1; + int clk = ST_PINCONF_UNPACK_RT_CLK(config); + int clknotdata = ST_PINCONF_UNPACK_RT_CLKNOTDATA(config); + int double_edge = ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config); + int invertclk = ST_PINCONF_UNPACK_RT_INVERTCLK(config); + int retime = ST_PINCONF_UNPACK_RT(config); + + unsigned long delay = st_pinconf_delay_to_bit( + ST_PINCONF_UNPACK_RT_DELAY(config), + info->data, config); + struct st_retime_dedicated *rt_d = &pc->rt.rt_d; + + unsigned long retime_config = + ((clk) << RT_D_CFG_CLK_SHIFT) | + ((delay) << RT_D_CFG_DELAY_SHIFT) | + ((input) << RT_D_CFG_DELAY_INNOTOUT_SHIFT) | + ((retime) << RT_D_CFG_RETIME_SHIFT) | + ((clknotdata) << RT_D_CFG_CLKNOTDATA_SHIFT) | + ((invertclk) << RT_D_CFG_INVERTCLK_SHIFT) | + ((double_edge) << RT_D_CFG_DOUBLE_EDGE_SHIFT); + + regmap_field_write(rt_d->rt[pin], retime_config); +} + +static void st_pinconf_get_direction(struct st_pio_control *pc, + int pin, unsigned long *config) +{ + unsigned int oe_value, pu_value, od_value; + + regmap_field_read(pc->oe, &oe_value); + regmap_field_read(pc->pu, &pu_value); + regmap_field_read(pc->od, &od_value); + + if (oe_value & BIT(pin)) + ST_PINCONF_PACK_OE(*config); + if (pu_value & BIT(pin)) + ST_PINCONF_PACK_PU(*config); + if (od_value & BIT(pin)) + ST_PINCONF_PACK_OD(*config); + +} + +static int st_pinconf_get_retime_packed(struct st_pinctrl *info, + struct st_pio_control *pc, int pin, unsigned long *config) +{ + const struct st_pctl_data *data = info->data; + struct st_retime_packed *rt_p = &pc->rt.rt_p; + unsigned int delay_bits, delay, delay0, delay1, val; + int output = ST_PINCONF_UNPACK_OE(*config); + + if (!regmap_field_read(rt_p->retime, &val) && (val & BIT(pin))) + ST_PINCONF_PACK_RT(*config); + + if (!regmap_field_read(rt_p->clk1notclk0, &val) && (val & BIT(pin))) + ST_PINCONF_PACK_RT_CLK(*config, 1); + + if (!regmap_field_read(rt_p->clknotdata, &val) && (val & BIT(pin))) + ST_PINCONF_PACK_RT_CLKNOTDATA(*config); + + if (!regmap_field_read(rt_p->double_edge, &val) && (val & BIT(pin))) + ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config); + + if (!regmap_field_read(rt_p->invertclk, &val) && (val & BIT(pin))) + ST_PINCONF_PACK_RT_INVERTCLK(*config); + + regmap_field_read(rt_p->delay_0, &delay0); + regmap_field_read(rt_p->delay_1, &delay1); + delay_bits = (((delay1 & BIT(pin)) ? 1 : 0) << 1) | + (((delay0 & BIT(pin)) ? 1 : 0)); + delay = st_pinconf_bit_to_delay(delay_bits, data, output); + ST_PINCONF_PACK_RT_DELAY(*config, delay); + + return 0; +} + +static int st_pinconf_get_retime_dedicated(struct st_pinctrl *info, + struct st_pio_control *pc, int pin, unsigned long *config) +{ + unsigned int value; + unsigned long delay_bits, delay, rt_clk; + int output = ST_PINCONF_UNPACK_OE(*config); + struct st_retime_dedicated *rt_d = &pc->rt.rt_d; + + regmap_field_read(rt_d->rt[pin], &value); + + rt_clk = (value & RT_D_CFG_CLK_MASK) >> RT_D_CFG_CLK_SHIFT; + ST_PINCONF_PACK_RT_CLK(*config, rt_clk); + + delay_bits = (value & RT_D_CFG_DELAY_MASK) >> RT_D_CFG_DELAY_SHIFT; + delay = st_pinconf_bit_to_delay(delay_bits, info->data, output); + ST_PINCONF_PACK_RT_DELAY(*config, delay); + + if (value & RT_D_CFG_CLKNOTDATA_MASK) + ST_PINCONF_PACK_RT_CLKNOTDATA(*config); + + if (value & RT_D_CFG_DOUBLE_EDGE_MASK) + ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config); + + if (value & RT_D_CFG_INVERTCLK_MASK) + ST_PINCONF_PACK_RT_INVERTCLK(*config); + + if (value & RT_D_CFG_RETIME_MASK) + ST_PINCONF_PACK_RT(*config); + + return 0; +} + +/* GPIO related functions */ + +static inline void __st_gpio_set(struct st_gpio_bank *bank, + unsigned offset, int value) +{ + if (value) + writel(BIT(offset), bank->base + REG_PIO_SET_POUT); + else + writel(BIT(offset), bank->base + REG_PIO_CLR_POUT); +} + +static void st_gpio_direction(struct st_gpio_bank *bank, + unsigned int gpio, unsigned int direction) +{ + int offset = st_gpio_pin(gpio); + int i = 0; + /** + * There are three configuration registers (PIOn_PC0, PIOn_PC1 + * and PIOn_PC2) for each port. These are used to configure the + * PIO port pins. Each pin can be configured as an input, output, + * bidirectional, or alternative function pin. Three bits, one bit + * from each of the three registers, configure the corresponding bit of + * the port. Valid bit settings is: + * + * PC2 PC1 PC0 Direction. + * 0 0 0 [Input Weak pull-up] + * 0 0 or 1 1 [Bidirection] + * 0 1 0 [Output] + * 1 0 0 [Input] + * + * PIOn_SET_PC and PIOn_CLR_PC registers are used to set and clear bits + * individually. + */ + for (i = 0; i <= 2; i++) { + if (direction & BIT(i)) + writel(BIT(offset), bank->base + REG_PIO_SET_PC(i)); + else + writel(BIT(offset), bank->base + REG_PIO_CLR_PC(i)); + } +} + +static int st_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_request_gpio(chip->base + offset); +} + +static void st_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + pinctrl_free_gpio(chip->base + offset); +} + +static int st_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct st_gpio_bank *bank = gpio_chip_to_bank(chip); + + return !!(readl(bank->base + REG_PIO_PIN) & BIT(offset)); +} + +static void st_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct st_gpio_bank *bank = gpio_chip_to_bank(chip); + __st_gpio_set(bank, offset, value); +} + +static int st_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + pinctrl_gpio_direction_input(chip->base + offset); + + return 0; +} + +static int st_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct st_gpio_bank *bank = gpio_chip_to_bank(chip); + + __st_gpio_set(bank, offset, value); + pinctrl_gpio_direction_output(chip->base + offset); + + return 0; +} + +static int st_gpio_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, u32 *flags) +{ + if (WARN_ON(gc->of_gpio_n_cells < 1)) + return -EINVAL; + + if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) + return -EINVAL; + + if (gpiospec->args[0] > gc->ngpio) + return -EINVAL; + + return gpiospec->args[0]; +} + +/* Pinctrl Groups */ +static int st_pctl_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->ngroups; +} + +static const char *st_pctl_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->groups[selector].name; +} + +static int st_pctl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned selector, const unsigned **pins, unsigned *npins) +{ + struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + if (selector >= info->ngroups) + return -EINVAL; + + *pins = info->groups[selector].pins; + *npins = info->groups[selector].npins; + + return 0; +} + +static const inline struct st_pctl_group *st_pctl_find_group_by_name( + const struct st_pinctrl *info, const char *name) +{ + int i; + + for (i = 0; i < info->ngroups; i++) { + if (!strcmp(info->groups[i].name, name)) + return &info->groups[i]; + } + + return NULL; +} + +static int st_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, struct pinctrl_map **map, unsigned *num_maps) +{ + struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + const struct st_pctl_group *grp; + struct pinctrl_map *new_map; + struct device_node *parent; + int map_num, i; + + grp = st_pctl_find_group_by_name(info, np->name); + if (!grp) { + dev_err(info->dev, "unable to find group for node %s\n", + np->name); + return -EINVAL; + } + + map_num = grp->npins + 1; + new_map = devm_kzalloc(pctldev->dev, + sizeof(*new_map) * map_num, GFP_KERNEL); + if (!new_map) + return -ENOMEM; + + parent = of_get_parent(np); + if (!parent) { + devm_kfree(pctldev->dev, new_map); + return -EINVAL; + } + + *map = new_map; + *num_maps = map_num; + new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; + new_map[0].data.mux.function = parent->name; + new_map[0].data.mux.group = np->name; + of_node_put(parent); + + /* create config map per pin */ + new_map++; + for (i = 0; i < grp->npins; i++) { + new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN; + new_map[i].data.configs.group_or_pin = + pin_get_name(pctldev, grp->pins[i]); + new_map[i].data.configs.configs = &grp->pin_conf[i].config; + new_map[i].data.configs.num_configs = 1; + } + dev_info(pctldev->dev, "maps: function %s group %s num %d\n", + (*map)->data.mux.function, grp->name, map_num); + + return 0; +} + +static void st_pctl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ +} + +static struct pinctrl_ops st_pctlops = { + .get_groups_count = st_pctl_get_groups_count, + .get_group_pins = st_pctl_get_group_pins, + .get_group_name = st_pctl_get_group_name, + .dt_node_to_map = st_pctl_dt_node_to_map, + .dt_free_map = st_pctl_dt_free_map, +}; + +/* Pinmux */ +static int st_pmx_get_funcs_count(struct pinctrl_dev *pctldev) +{ + struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->nfunctions; +} + +const char *st_pmx_get_fname(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->functions[selector].name; +} + +static int st_pmx_get_groups(struct pinctrl_dev *pctldev, + unsigned selector, const char * const **grps, unsigned * const ngrps) +{ + struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + *grps = info->functions[selector].groups; + *ngrps = info->functions[selector].ngroups; + + return 0; +} + +static struct st_pio_control *st_get_pio_control( + struct pinctrl_dev *pctldev, int pin) +{ + struct pinctrl_gpio_range *range = + pinctrl_find_gpio_range_from_pin(pctldev, pin); + struct st_gpio_bank *bank = gpio_range_to_bank(range); + + return &bank->pc; +} + +static int st_pmx_enable(struct pinctrl_dev *pctldev, unsigned fselector, + unsigned group) +{ + struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + struct st_pinconf *conf = info->groups[group].pin_conf; + struct st_pio_control *pc; + int i; + + for (i = 0; i < info->groups[group].npins; i++) { + pc = st_get_pio_control(pctldev, conf[i].pin); + st_pctl_set_function(pc, conf[i].pin, conf[i].altfunc); + } + + return 0; +} + +static void st_pmx_disable(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ +} + +static int st_pmx_set_gpio_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, unsigned gpio, + bool input) +{ + struct st_gpio_bank *bank = gpio_range_to_bank(range); + /* + * When a PIO bank is used in its primary function mode (altfunc = 0) + * Output Enable (OE), Open Drain(OD), and Pull Up (PU) + * for the primary PIO functions are driven by the related PIO block + */ + st_pctl_set_function(&bank->pc, gpio, 0); + st_gpio_direction(bank, gpio, input ? + ST_GPIO_DIRECTION_IN : ST_GPIO_DIRECTION_OUT); + + return 0; +} + +static struct pinmux_ops st_pmxops = { + .get_functions_count = st_pmx_get_funcs_count, + .get_function_name = st_pmx_get_fname, + .get_function_groups = st_pmx_get_groups, + .enable = st_pmx_enable, + .disable = st_pmx_disable, + .gpio_set_direction = st_pmx_set_gpio_direction, +}; + +/* Pinconf */ +static void st_pinconf_get_retime(struct st_pinctrl *info, + struct st_pio_control *pc, int pin, unsigned long *config) +{ + if (info->data->rt_style == st_retime_style_packed) + st_pinconf_get_retime_packed(info, pc, pin, config); + else if (info->data->rt_style == st_retime_style_dedicated) + if ((BIT(pin) & pc->rt_pin_mask)) + st_pinconf_get_retime_dedicated(info, pc, + pin, config); +} + +static void st_pinconf_set_retime(struct st_pinctrl *info, + struct st_pio_control *pc, int pin, unsigned long config) +{ + if (info->data->rt_style == st_retime_style_packed) + st_pinconf_set_retime_packed(info, pc, config, pin); + else if (info->data->rt_style == st_retime_style_dedicated) + if ((BIT(pin) & pc->rt_pin_mask)) + st_pinconf_set_retime_dedicated(info, pc, + config, pin); +} + +static int st_pinconf_set(struct pinctrl_dev *pctldev, + unsigned pin_id, unsigned long config) +{ + int pin = st_gpio_pin(pin_id); + struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id); + + st_pinconf_set_config(pc, pin, config); + st_pinconf_set_retime(info, pc, pin, config); + + return 0; +} + +static int st_pinconf_get(struct pinctrl_dev *pctldev, + unsigned pin_id, unsigned long *config) +{ + int pin = st_gpio_pin(pin_id); + struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id); + + *config = 0; + st_pinconf_get_direction(pc, pin, config); + st_pinconf_get_retime(info, pc, pin, config); + + return 0; +} + +static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned pin_id) +{ + unsigned long config; + st_pinconf_get(pctldev, pin_id, &config); + + seq_printf(s, "[OE:%ld,PU:%ld,OD:%ld]\n" + "\t\t[retime:%ld,invclk:%ld,clknotdat:%ld," + "de:%ld,rt-clk:%ld,rt-delay:%ld]", + ST_PINCONF_UNPACK_OE(config), + ST_PINCONF_UNPACK_PU(config), + ST_PINCONF_UNPACK_OD(config), + ST_PINCONF_UNPACK_RT(config), + ST_PINCONF_UNPACK_RT_INVERTCLK(config), + ST_PINCONF_UNPACK_RT_CLKNOTDATA(config), + ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config), + ST_PINCONF_UNPACK_RT_CLK(config), + ST_PINCONF_UNPACK_RT_DELAY(config)); +} + +static struct pinconf_ops st_confops = { + .pin_config_get = st_pinconf_get, + .pin_config_set = st_pinconf_set, + .pin_config_dbg_show = st_pinconf_dbg_show, +}; + +static void st_pctl_dt_child_count(struct st_pinctrl *info, + struct device_node *np) +{ + struct device_node *child; + for_each_child_of_node(np, child) { + if (of_property_read_bool(child, "gpio-controller")) { + info->nbanks++; + } else { + info->nfunctions++; + info->ngroups += of_get_child_count(child); + } + } +} + +static int st_pctl_dt_setup_retime_packed(struct st_pinctrl *info, + int bank, struct st_pio_control *pc) +{ + struct device *dev = info->dev; + struct regmap *rm = info->regmap; + const struct st_pctl_data *data = info->data; + /* 2 registers per bank */ + int reg = (data->rt + bank * RT_P_CFGS_PER_BANK) * 4; + struct st_retime_packed *rt_p = &pc->rt.rt_p; + /* cfg0 */ + struct reg_field clk1notclk0 = RT_P_CFG0_CLK1NOTCLK0_FIELD(reg); + struct reg_field delay_0 = RT_P_CFG0_DELAY_0_FIELD(reg); + struct reg_field delay_1 = RT_P_CFG0_DELAY_1_FIELD(reg); + /* cfg1 */ + struct reg_field invertclk = RT_P_CFG1_INVERTCLK_FIELD(reg + 4); + struct reg_field retime = RT_P_CFG1_RETIME_FIELD(reg + 4); + struct reg_field clknotdata = RT_P_CFG1_CLKNOTDATA_FIELD(reg + 4); + struct reg_field double_edge = RT_P_CFG1_DOUBLE_EDGE_FIELD(reg + 4); + + rt_p->clk1notclk0 = devm_regmap_field_alloc(dev, rm, clk1notclk0); + rt_p->delay_0 = devm_regmap_field_alloc(dev, rm, delay_0); + rt_p->delay_1 = devm_regmap_field_alloc(dev, rm, delay_1); + rt_p->invertclk = devm_regmap_field_alloc(dev, rm, invertclk); + rt_p->retime = devm_regmap_field_alloc(dev, rm, retime); + rt_p->clknotdata = devm_regmap_field_alloc(dev, rm, clknotdata); + rt_p->double_edge = devm_regmap_field_alloc(dev, rm, double_edge); + + if (IS_ERR(rt_p->clk1notclk0) || IS_ERR(rt_p->delay_0) || + IS_ERR(rt_p->delay_1) || IS_ERR(rt_p->invertclk) || + IS_ERR(rt_p->retime) || IS_ERR(rt_p->clknotdata) || + IS_ERR(rt_p->double_edge)) + return -EINVAL; + + return 0; +} + +static int st_pctl_dt_setup_retime_dedicated(struct st_pinctrl *info, + int bank, struct st_pio_control *pc) +{ + struct device *dev = info->dev; + struct regmap *rm = info->regmap; + const struct st_pctl_data *data = info->data; + /* 8 registers per bank */ + int reg_offset = (data->rt + bank * RT_D_CFGS_PER_BANK) * 4; + struct st_retime_dedicated *rt_d = &pc->rt.rt_d; + unsigned int j; + u32 pin_mask = pc->rt_pin_mask; + + for (j = 0; j < RT_D_CFGS_PER_BANK; j++) { + if (BIT(j) & pin_mask) { + struct reg_field reg = REG_FIELD(reg_offset, 0, 31); + rt_d->rt[j] = devm_regmap_field_alloc(dev, rm, reg); + if (IS_ERR(rt_d->rt[j])) + return -EINVAL; + reg_offset += 4; + } + } + return 0; +} + +static int st_pctl_dt_setup_retime(struct st_pinctrl *info, + int bank, struct st_pio_control *pc) +{ + const struct st_pctl_data *data = info->data; + if (data->rt_style == st_retime_style_packed) + return st_pctl_dt_setup_retime_packed(info, bank, pc); + else if (data->rt_style == st_retime_style_dedicated) + return st_pctl_dt_setup_retime_dedicated(info, bank, pc); + + return -EINVAL; +} + +static int st_parse_syscfgs(struct st_pinctrl *info, + int bank, struct device_node *np) +{ + const struct st_pctl_data *data = info->data; + /** + * For a given shared register like OE/PU/OD, there are 8 bits per bank + * 0:7 belongs to bank0, 8:15 belongs to bank1 ... + * So each register is shared across 4 banks. + */ + int lsb = (bank%4) * ST_GPIO_PINS_PER_BANK; + int msb = lsb + ST_GPIO_PINS_PER_BANK - 1; + struct reg_field alt_reg = REG_FIELD((data->alt + bank) * 4, 0, 31); + struct reg_field oe_reg = REG_FIELD((data->oe + bank/4) * 4, lsb, msb); + struct reg_field pu_reg = REG_FIELD((data->pu + bank/4) * 4, lsb, msb); + struct reg_field od_reg = REG_FIELD((data->od + bank/4) * 4, lsb, msb); + struct st_pio_control *pc = &info->banks[bank].pc; + struct device *dev = info->dev; + struct regmap *regmap = info->regmap; + + pc->alt = devm_regmap_field_alloc(dev, regmap, alt_reg); + pc->oe = devm_regmap_field_alloc(dev, regmap, oe_reg); + pc->pu = devm_regmap_field_alloc(dev, regmap, pu_reg); + pc->od = devm_regmap_field_alloc(dev, regmap, od_reg); + + if (IS_ERR(pc->alt) || IS_ERR(pc->oe) || + IS_ERR(pc->pu) || IS_ERR(pc->od)) + return -EINVAL; + + /* retime avaiable for all pins by default */ + pc->rt_pin_mask = 0xff; + of_property_read_u32(np, "st,retime-pin-mask", &pc->rt_pin_mask); + st_pctl_dt_setup_retime(info, bank, pc); + + return 0; +} + +/* + * Each pin is represented in of the below forms. + * + */ +static int st_pctl_dt_parse_groups(struct device_node *np, + struct st_pctl_group *grp, struct st_pinctrl *info, int idx) +{ + /* bank pad direction val altfunction */ + const __be32 *list; + struct property *pp; + struct st_pinconf *conf; + phandle phandle; + struct device_node *pins; + u32 pin; + int i = 0, npins = 0, nr_props; + + pins = of_get_child_by_name(np, "st,pins"); + if (!pins) + return -ENODATA; + + for_each_property_of_node(pins, pp) { + /* Skip those we do not want to proceed */ + if (!strcmp(pp->name, "name")) + continue; + + if (pp && (pp->length/sizeof(__be32)) >= OF_GPIO_ARGS_MIN) { + npins++; + } else { + pr_warn("Invalid st,pins in %s node\n", np->name); + return -EINVAL; + } + } + + grp->npins = npins; + grp->name = np->name; + grp->pins = devm_kzalloc(info->dev, npins * sizeof(u32), GFP_KERNEL); + grp->pin_conf = devm_kzalloc(info->dev, + npins * sizeof(*conf), GFP_KERNEL); + + if (!grp->pins || !grp->pin_conf) + return -ENOMEM; + + /* */ + for_each_property_of_node(pins, pp) { + if (!strcmp(pp->name, "name")) + continue; + nr_props = pp->length/sizeof(u32); + list = pp->value; + conf = &grp->pin_conf[i]; + + /* bank & offset */ + phandle = be32_to_cpup(list++); + pin = be32_to_cpup(list++); + conf->pin = of_get_named_gpio(pins, pp->name, 0); + conf->name = pp->name; + grp->pins[i] = conf->pin; + /* mux */ + conf->altfunc = be32_to_cpup(list++); + conf->config = 0; + /* direction */ + conf->config |= be32_to_cpup(list++); + /* rt_type rt_delay rt_clk */ + if (nr_props >= OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN) { + /* rt_type */ + conf->config |= be32_to_cpup(list++); + /* rt_delay */ + conf->config |= be32_to_cpup(list++); + /* rt_clk */ + if (nr_props > OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN) + conf->config |= be32_to_cpup(list++); + } + i++; + } + of_node_put(pins); + + return 0; +} + +static int st_pctl_parse_functions(struct device_node *np, + struct st_pinctrl *info, u32 index, int *grp_index) +{ + struct device_node *child; + struct st_pmx_func *func; + struct st_pctl_group *grp; + int ret, i; + + func = &info->functions[index]; + func->name = np->name; + func->ngroups = of_get_child_count(np); + if (func->ngroups <= 0) { + dev_err(info->dev, "No groups defined\n"); + return -EINVAL; + } + func->groups = devm_kzalloc(info->dev, + func->ngroups * sizeof(char *), GFP_KERNEL); + if (!func->groups) + return -ENOMEM; + + i = 0; + for_each_child_of_node(np, child) { + func->groups[i] = child->name; + grp = &info->groups[*grp_index]; + *grp_index += 1; + ret = st_pctl_dt_parse_groups(child, grp, info, i++); + if (ret) + return ret; + } + dev_info(info->dev, "Function[%d\t name:%s,\tgroups:%d]\n", + index, func->name, func->ngroups); + + return 0; +} + +static struct gpio_chip st_gpio_template = { + .request = st_gpio_request, + .free = st_gpio_free, + .get = st_gpio_get, + .set = st_gpio_set, + .direction_input = st_gpio_direction_input, + .direction_output = st_gpio_direction_output, + .ngpio = ST_GPIO_PINS_PER_BANK, + .of_gpio_n_cells = 1, + .of_xlate = st_gpio_xlate, +}; + +static int st_gpiolib_register_bank(struct st_pinctrl *info, + int bank_nr, struct device_node *np) +{ + struct st_gpio_bank *bank = &info->banks[bank_nr]; + struct pinctrl_gpio_range *range = &bank->range; + struct device *dev = info->dev; + int bank_num = of_alias_get_id(np, "gpio"); + struct resource res; + int err; + + if (of_address_to_resource(np, 0, &res)) + return -ENODEV; + + bank->base = devm_request_and_ioremap(dev, &res); + if (!bank->base) { + dev_err(dev, "Can't get IO memory mapping!\n"); + return -ENODEV; + } + + bank->gpio_chip = st_gpio_template; + bank->gpio_chip.base = bank_num * ST_GPIO_PINS_PER_BANK; + bank->gpio_chip.ngpio = ST_GPIO_PINS_PER_BANK; + bank->gpio_chip.of_node = np; + + of_property_read_string(np, "st,bank-name", &range->name); + bank->gpio_chip.label = range->name; + + range->id = bank_num; + range->pin_base = range->base = range->id * ST_GPIO_PINS_PER_BANK; + range->npins = bank->gpio_chip.ngpio; + range->gc = &bank->gpio_chip; + err = gpiochip_add(&bank->gpio_chip); + if (err) { + dev_err(dev, "Failed to add gpiochip(%d)!\n", bank_num); + return err; + } + dev_info(dev, "%s bank added.\n", range->name); + + return 0; +} + +static struct of_device_id st_pctl_of_match[] = { + { .compatible = "st,stih415-sbc-pinctrl", .data = &stih415_sbc_data }, + { .compatible = "st,stih415-rear-pinctrl", .data = &stih415_rear_data }, + { .compatible = "st,stih415-left-pinctrl", .data = &stih415_left_data }, + { .compatible = "st,stih415-right-pinctrl", + .data = &stih415_right_data }, + { .compatible = "st,stih415-front-pinctrl", + .data = &stih415_front_data }, + { .compatible = "st,stih416-sbc-pinctrl", .data = &stih416_data}, + { .compatible = "st,stih416-front-pinctrl", .data = &stih416_data}, + { .compatible = "st,stih416-rear-pinctrl", .data = &stih416_data}, + { .compatible = "st,stih416-fvdp-fe-pinctrl", .data = &stih416_data}, + { .compatible = "st,stih416-fvdp-lite-pinctrl", .data = &stih416_data}, + { /* sentinel */ } +}; + +static int st_pctl_probe_dt(struct platform_device *pdev, + struct pinctrl_desc *pctl_desc, struct st_pinctrl *info) +{ + int ret = 0; + int i = 0, j = 0, k = 0, bank; + struct pinctrl_pin_desc *pdesc; + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + int grp_index = 0; + + st_pctl_dt_child_count(info, np); + if (!info->nbanks) { + dev_err(&pdev->dev, "you need atleast one gpio bank\n"); + return -EINVAL; + } + + dev_info(&pdev->dev, "nbanks = %d\n", info->nbanks); + dev_info(&pdev->dev, "nfunctions = %d\n", info->nfunctions); + dev_info(&pdev->dev, "ngroups = %d\n", info->ngroups); + + info->functions = devm_kzalloc(&pdev->dev, + info->nfunctions * sizeof(*info->functions), GFP_KERNEL); + + info->groups = devm_kzalloc(&pdev->dev, + info->ngroups * sizeof(*info->groups) , GFP_KERNEL); + + info->banks = devm_kzalloc(&pdev->dev, + info->nbanks * sizeof(*info->banks), GFP_KERNEL); + + if (!info->functions || !info->groups || !info->banks) + return -ENOMEM; + + info->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (!info->regmap) { + dev_err(info->dev, "No syscfg phandle specified\n"); + return -ENOMEM; + } + info->data = of_match_node(st_pctl_of_match, np)->data; + + pctl_desc->npins = info->nbanks * ST_GPIO_PINS_PER_BANK; + pdesc = devm_kzalloc(&pdev->dev, + sizeof(*pdesc) * pctl_desc->npins, GFP_KERNEL); + if (!pdesc) + return -ENOMEM; + + pctl_desc->pins = pdesc; + + bank = 0; + for_each_child_of_node(np, child) { + if (of_property_read_bool(child, "gpio-controller")) { + const char *bank_name = NULL; + ret = st_gpiolib_register_bank(info, bank, child); + if (ret) + return ret; + + k = info->banks[bank].range.pin_base; + bank_name = info->banks[bank].range.name; + for (j = 0; j < ST_GPIO_PINS_PER_BANK; j++, k++) { + pdesc->number = k; + pdesc->name = kasprintf(GFP_KERNEL, "%s[%d]", + bank_name, j); + pdesc++; + } + st_parse_syscfgs(info, bank, child); + bank++; + } else { + ret = st_pctl_parse_functions(child, info, + i++, &grp_index); + if (ret) { + dev_err(&pdev->dev, "No functions found.\n"); + return ret; + } + } + } + + return 0; +} + +static int st_pctl_probe(struct platform_device *pdev) +{ + struct st_pinctrl *info; + struct pinctrl_desc *pctl_desc; + int ret, i; + + if (!pdev->dev.of_node) { + dev_err(&pdev->dev, "device node not found.\n"); + return -EINVAL; + } + + pctl_desc = devm_kzalloc(&pdev->dev, sizeof(*pctl_desc), GFP_KERNEL); + if (!pctl_desc) + return -ENOMEM; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = &pdev->dev; + platform_set_drvdata(pdev, info); + ret = st_pctl_probe_dt(pdev, pctl_desc, info); + if (ret) + return ret; + + pctl_desc->owner = THIS_MODULE, + pctl_desc->pctlops = &st_pctlops, + pctl_desc->pmxops = &st_pmxops, + pctl_desc->confops = &st_confops, + pctl_desc->name = dev_name(&pdev->dev); + + info->pctl = pinctrl_register(pctl_desc, &pdev->dev, info); + if (IS_ERR(info->pctl)) { + dev_err(&pdev->dev, "Failed pinctrl registration\n"); + return PTR_ERR(info->pctl); + } + + for (i = 0; i < info->nbanks; i++) + pinctrl_add_gpio_range(info->pctl, &info->banks[i].range); + + return 0; +} + +static struct platform_driver st_pctl_driver = { + .driver = { + .name = "st-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(st_pctl_of_match), + }, + .probe = st_pctl_probe, +}; + +static int __init st_pctl_init(void) +{ + return platform_driver_register(&st_pctl_driver); +} +arch_initcall(st_pctl_init); -- cgit v1.2.3-70-g09d2 From 5c75acdcae1be608b27414334d7e1febef7dbd99 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 28 Jun 2013 19:30:40 +0800 Subject: pinctrl: st: fix return value check In case of error, the function pinctrl_register() returns NULL not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. The function syscon_regmap_lookup_by_phandle() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Acked-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- drivers/pinctrl/pinctrl-st.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c index 7effedfd476..de8c62664fa 100644 --- a/drivers/pinctrl/pinctrl-st.c +++ b/drivers/pinctrl/pinctrl-st.c @@ -1299,9 +1299,9 @@ static int st_pctl_probe_dt(struct platform_device *pdev, return -ENOMEM; info->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); - if (!info->regmap) { + if (IS_ERR(info->regmap)) { dev_err(info->dev, "No syscfg phandle specified\n"); - return -ENOMEM; + return PTR_ERR(info->regmap); } info->data = of_match_node(st_pctl_of_match, np)->data; @@ -1376,9 +1376,9 @@ static int st_pctl_probe(struct platform_device *pdev) pctl_desc->name = dev_name(&pdev->dev); info->pctl = pinctrl_register(pctl_desc, &pdev->dev, info); - if (IS_ERR(info->pctl)) { + if (!info->pctl) { dev_err(&pdev->dev, "Failed pinctrl registration\n"); - return PTR_ERR(info->pctl); + return -EINVAL; } for (i = 0; i < info->nbanks; i++) -- cgit v1.2.3-70-g09d2 From 539fde59ebc615bcb9af373af8947e866dc072c7 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 30 Jun 2013 08:58:57 +0800 Subject: pinctrl: st: Remove unnecessary use of of_match_ptr macro This is a DT only driver and st_pctl_of_match is always compiled in. Hence of_match_ptr is unnecessary. Signed-off-by: Axel Lin Acked-by: Linus Walleij Signed-off-by: Mark Brown --- drivers/pinctrl/pinctrl-st.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c index de8c62664fa..04d4506ae18 100644 --- a/drivers/pinctrl/pinctrl-st.c +++ b/drivers/pinctrl/pinctrl-st.c @@ -1391,7 +1391,7 @@ static struct platform_driver st_pctl_driver = { .driver = { .name = "st-pinctrl", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(st_pctl_of_match), + .of_match_table = st_pctl_of_match, }, .probe = st_pctl_probe, }; -- cgit v1.2.3-70-g09d2