From 7d948b1114c7eded14e5a31f440af751d70ecde0 Mon Sep 17 00:00:00 2001 From: "JosephChan@via.com.tw" Date: Fri, 16 Oct 2009 15:45:23 +0800 Subject: pata_via: extend the rev_max for VT6330 Fix the VT6330 issue, it's because the rev_max of VT6330 exceeds 0x2f. The VT6415 and VT6330 share the same device ID. Signed-off-by: Joseph Chan Signed-off-by: Jeff Garzik --- drivers/ata/pata_via.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 45657cacec4..88984b803d6 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -111,7 +111,7 @@ static const struct via_isa_bridge { { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, - { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, -- cgit v1.2.3-70-g09d2 From 726206f84c67303cc004aacfd45d37f9277a29f6 Mon Sep 17 00:00:00 2001 From: peer chen Date: Thu, 15 Oct 2009 16:34:56 +0800 Subject: ahci: Add the AHCI controller Linux Device ID for NVIDIA chipsets. Add the generic device ID for NVIDIA AHCI controller. Signed-off-by: Peer Chen Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index b1a257746a1..8c5c0dd4f6f 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -605,6 +605,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq }, /* Linux ID */ { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */ { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */ { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */ -- cgit v1.2.3-70-g09d2 From 5deab536654f95345ea11e8ec6ed5c778df348b5 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Tue, 13 Oct 2009 11:14:00 +0800 Subject: ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2 This patch renames the code name SB900 into Hudson-2 Signed-off-by: Shane Huang Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 2 +- drivers/ata/pata_atiixp.c | 2 +- drivers/ide/atiixp.c | 2 +- drivers/pci/quirks.c | 6 +++--- include/linux/pci_ids.h | 6 ++---- 5 files changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 8c5c0dd4f6f..a06f5d6375a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -575,7 +575,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */ /* AMD */ - { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD SB900 */ + { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */ /* AMD is using RAID class only for ahci controllers */ { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci }, diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index aa4b3f6ae77..ae4454d4e95 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -246,7 +246,7 @@ static const struct pci_device_id atiixp[] = { { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), }, - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), }, { }, }; diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c index 6396c3ad325..837322b10a4 100644 --- a/drivers/ide/atiixp.c +++ b/drivers/ide/atiixp.c @@ -177,7 +177,7 @@ static const struct pci_device_id atiixp_pci_tbl[] = { { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 }, - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), 0 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a790b1771f9..245d2cdb476 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1009,7 +1009,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev) { - /* set SBX00 SATA in IDE mode to AHCI mode */ + /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */ u8 tmp; pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); @@ -1028,8 +1028,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode); -DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); /* * Serverworks CSB5 IDE does not fully support native mode diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index f490e7a7307..86257a41273 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -379,9 +379,6 @@ #define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c #define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390 #define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c -/* AMD SB Chipset */ -#define PCI_DEVICE_ID_AMD_SB900_IDE 0x780c -#define PCI_DEVICE_ID_AMD_SB900_SATA_IDE 0x7800 #define PCI_VENDOR_ID_VLSI 0x1004 #define PCI_DEVICE_ID_VLSI_82C592 0x0005 @@ -553,9 +550,10 @@ #define PCI_DEVICE_ID_AMD_CS5536_UDC 0x2096 #define PCI_DEVICE_ID_AMD_CS5536_UOC 0x2097 #define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A - #define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081 #define PCI_DEVICE_ID_AMD_LX_AES 0x2082 +#define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c +#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800 #define PCI_VENDOR_ID_TRIDENT 0x1023 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000 -- cgit v1.2.3-70-g09d2 From 6489e3262e6b188a1a009b65e8a94b7aa17645b7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Oct 2009 11:18:28 +0900 Subject: sata_nv: make sure link is brough up online when skipping hardreset prereset doesn't bring link online if hardreset is about to happen and nv_hardreset() may skip if conditions are not right so softreset may be entered with non-working link status if the system firmware didn't bring it up before entering OS code which can happen during resume. This patch makes nv_hardreset() to bring up the link if it's skipping reset. This bug was reported by frodone@gmail.com in the following bug entry. http://bugzilla.kernel.org/show_bug.cgi?id=14329 Signed-off-by: Tejun Heo Reported-by: frodone@gmail.com Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 86a40582999..1eb4e020eb5 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -1594,9 +1594,21 @@ static int nv_hardreset(struct ata_link *link, unsigned int *class, !ata_dev_enabled(link->device)) sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, NULL, NULL); - else if (!(ehc->i.flags & ATA_EHI_QUIET)) - ata_link_printk(link, KERN_INFO, - "nv: skipping hardreset on occupied port\n"); + else { + const unsigned long *timing = sata_ehc_deb_timing(ehc); + int rc; + + if (!(ehc->i.flags & ATA_EHI_QUIET)) + ata_link_printk(link, KERN_INFO, "nv: skipping " + "hardreset on occupied port\n"); + + /* make sure the link is online */ + rc = sata_link_resume(link, timing, deadline); + /* whine about phy resume failure but proceed */ + if (rc && rc != -EOPNOTSUPP) + ata_link_printk(link, KERN_WARNING, "failed to resume " + "link (errno=%d)\n", rc); + } /* device signature acquisition is unreliable */ return -EAGAIN; -- cgit v1.2.3-70-g09d2 From 4f7c2874995ac48a4622755b8bd159eb2fb6d8f4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 15 Oct 2009 23:37:32 +0900 Subject: libata: fix PMP initialization Commit 842faa6c1a1d6faddf3377948e5cf214812c6c90 fixed error handling during attach by not committing detected device class to dev->class while attaching a new device. However, this change missed the PMP class check in the configuration loop causing a new PMP device to go through ata_dev_configure() as if it were an ATA or ATAPI device. As PMP device doesn't have a regular IDENTIFY data, this makes ata_dev_configure() tries to configure a PMP device using an invalid data. For the most part, it wasn't too harmful and went unnoticed but this ends up clearing dev->flags which may have ATA_DFLAG_AN set by sata_pmp_attach(). This means that SATA_PMP_FEAT_NOTIFY ends up being disabled on PMPs and on PMPs which honor the flag breaks hotplug support. This problem was discovered and reported by Ethan Hsiao. Signed-off-by: Tejun Heo Reported-by: Ethan Hsiao Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 0a97822da21..bba2ae5df1c 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2981,12 +2981,14 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, * device detection messages backwards. */ ata_for_each_dev(dev, link, ALL) { - if (!(new_mask & (1 << dev->devno)) || - dev->class == ATA_DEV_PMP) + if (!(new_mask & (1 << dev->devno))) continue; dev->class = ehc->classes[dev->devno]; + if (dev->class == ATA_DEV_PMP) + continue; + ehc->i.flags |= ATA_EHI_PRINTINFO; rc = ata_dev_configure(dev); ehc->i.flags &= ~ATA_EHI_PRINTINFO; -- cgit v1.2.3-70-g09d2 From f4b31db92d163df8a639f5a8c8633bdeb6e8432d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 16 Oct 2009 13:00:51 +0900 Subject: libata: fix internal command failure handling When an internal command fails, it should be failed directly without invoking EH. In the original implemetation, this was accomplished by letting internal command bypass failure handling in ata_qc_complete(). However, later changes added post-successful-completion handling to that code path and the success path is no longer adequate as internal command failure path. One of the visible problems is that internal command failure due to timeout or other freeze conditions would spuriously trigger WARN_ON_ONCE() in the success path. This patch updates failure path such that internal command failure handling is contained there. Signed-off-by: Tejun Heo Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index b525a098134..d7f0f1b1ae3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5028,12 +5028,14 @@ void ata_qc_complete(struct ata_queued_cmd *qc) qc->flags |= ATA_QCFLAG_FAILED; if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { - if (!ata_tag_internal(qc->tag)) { - /* always fill result TF for failed qc */ - fill_result_tf(qc); + /* always fill result TF for failed qc */ + fill_result_tf(qc); + + if (!ata_tag_internal(qc->tag)) ata_qc_schedule_eh(qc); - return; - } + else + __ata_qc_complete(qc); + return; } WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN); -- cgit v1.2.3-70-g09d2 From 6d4f950e9ea15816c6a4f266ce6b9e438346771e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 6 Oct 2009 16:07:51 +0100 Subject: pata_sc1200: Fix crash on boot The SC1200 needs a NULL terminator or it may cause a crash on boot. Bug #14227 Also correct a bogus comment as the driver had serializing added so can run dual port. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_sc1200.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index f49814d6fd2..3bbed8322ec 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -235,8 +235,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = ATA_UDMA2, .port_ops = &sc1200_port_ops }; - /* Can't enable port 2 yet, see top comments */ - const struct ata_port_info *ppi[] = { &info, }; + const struct ata_port_info *ppi[] = { &info, NULL }; return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL); } -- cgit v1.2.3-70-g09d2 From 159a7ff7a13f9a02c75006f40c0561a3a81aefcd Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Mon, 12 Oct 2009 15:44:00 -0700 Subject: sata_mv: Prevent PIO commands to be defered too long if traffic in progress. Use excl_link when non NCQ commands are defered, to be sure they are processed as soon as outstanding commands are completed. It prevents some commands to be defered indifinitely when using a port multiplier. Signed-off-by: Gwendal Grignou Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 17f9ff9067a..6f5093b7c8c 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1382,6 +1382,25 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) */ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) return ATA_DEFER_PORT; + + /* PIO commands need exclusive link: no other commands [DMA or PIO] + * can run concurrently. + * set excl_link when we want to send a PIO command in DMA mode + * or a non-NCQ command in NCQ mode. + * When we receive a command from that link, and there are no + * outstanding commands, mark a flag to clear excl_link and let + * the command go through. + */ + if (unlikely(ap->excl_link)) { + if (link == ap->excl_link) { + if (ap->nr_active_links) + return ATA_DEFER_PORT; + qc->flags |= ATA_QCFLAG_CLEAR_EXCL; + return 0; + } else + return ATA_DEFER_PORT; + } + /* * If the port is completely idle, then allow the new qc. */ @@ -1395,8 +1414,14 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) * doesn't allow it. */ if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) && - (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol)) - return 0; + (pp->pp_flags & MV_PP_FLAG_NCQ_EN)) { + if (ata_is_ncq(qc->tf.protocol)) + return 0; + else { + ap->excl_link = link; + return ATA_DEFER_PORT; + } + } return ATA_DEFER_PORT; } -- cgit v1.2.3-70-g09d2