From a38884f681a4d044befd30d9f3d19a0821bae63a Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 12 Mar 2013 10:15:43 +0200
Subject: videomode: simplify videomode Kconfig and Makefile

This patch simplifies videomode related Kconfig and Makefile. After this
patch, there's only one non-user selectable Kconfig option left,
VIDEOMODE_HELPERS. The reasons for the change:

* Videomode helper functions are not something that should be shown in
  the kernel configuration options. The related code should just be
  included if it's needed, i.e. selected by drivers using videomode.

* There's no need to have separate Kconfig options for videomode and
  display_timing. First of all, the amount of code for both is quite
  small. Second, videomode depends on display_timing, and display_timing
  in itself is not really useful, so both would be included in any case.

* CONFIG_VIDEOMODE is a bit vague name, and CONFIG_VIDEOMODE_HELPERS
  describes better what's included.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/drm_modes.c    |  8 ++++----
 drivers/gpu/drm/tilcdc/Kconfig |  3 +--
 drivers/video/Kconfig          | 22 ++--------------------
 drivers/video/Makefile         |  8 ++++----
 drivers/video/fbmon.c          |  8 ++++----
 5 files changed, 15 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 04fa6f1808d..0698c0e9bc2 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -506,7 +506,7 @@ drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh,
 }
 EXPORT_SYMBOL(drm_gtf_mode);
 
-#if IS_ENABLED(CONFIG_VIDEOMODE)
+#ifdef CONFIG_VIDEOMODE_HELPERS
 int drm_display_mode_from_videomode(const struct videomode *vm,
 				    struct drm_display_mode *dmode)
 {
@@ -540,9 +540,8 @@ int drm_display_mode_from_videomode(const struct videomode *vm,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(drm_display_mode_from_videomode);
-#endif
 
-#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+#ifdef CONFIG_OF
 /**
  * of_get_drm_display_mode - get a drm_display_mode from devicetree
  * @np: device_node with the timing specification
@@ -572,7 +571,8 @@ int of_get_drm_display_mode(struct device_node *np,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(of_get_drm_display_mode);
-#endif
+#endif /* CONFIG_OF */
+#endif /* CONFIG_VIDEOMODE_HELPERS */
 
 /**
  * drm_mode_set_name - set the name on a mode
diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig
index d24d0401347..e461e997245 100644
--- a/drivers/gpu/drm/tilcdc/Kconfig
+++ b/drivers/gpu/drm/tilcdc/Kconfig
@@ -4,8 +4,7 @@ config DRM_TILCDC
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DRM_GEM_CMA_HELPER
-	select OF_VIDEOMODE
-	select OF_DISPLAY_TIMING
+	select VIDEOMODE_HELPERS
 	select BACKLIGHT_CLASS_DEVICE
 	help
 	  Choose this option if you have an TI SoC with LCDC display
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4c1546f71d5..2a81b11367f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -31,26 +31,8 @@ config VIDEO_OUTPUT_CONTROL
 	  This framework adds support for low-level control of the video 
 	  output switch.
 
-config DISPLAY_TIMING
-       bool
-
-config VIDEOMODE
-       bool
-
-config OF_DISPLAY_TIMING
-	bool "Enable device tree display timing support"
-	depends on OF
-	select DISPLAY_TIMING
-	help
-	  helper to parse display timings from the devicetree
-
-config OF_VIDEOMODE
-	bool "Enable device tree videomode support"
-	depends on OF
-	select VIDEOMODE
-	select OF_DISPLAY_TIMING
-	help
-	  helper to get videomodes from the devicetree
+config VIDEOMODE_HELPERS
+	bool
 
 config HDMI
 	bool
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 9df387334cb..e414378d6a5 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -171,7 +171,7 @@ obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
 
 #video output switch sysfs driver
 obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o
-obj-$(CONFIG_DISPLAY_TIMING) += display_timing.o
-obj-$(CONFIG_OF_DISPLAY_TIMING) += of_display_timing.o
-obj-$(CONFIG_VIDEOMODE) += videomode.o
-obj-$(CONFIG_OF_VIDEOMODE) += of_videomode.o
+obj-$(CONFIG_VIDEOMODE_HELPERS) += display_timing.o videomode.o
+ifeq ($(CONFIG_OF),y)
+obj-$(CONFIG_VIDEOMODE_HELPERS) += of_display_timing.o of_videomode.o
+endif
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 94ad0f71383..368cedfeaf1 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -1376,7 +1376,7 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
 	return err;
 }
 
-#if IS_ENABLED(CONFIG_VIDEOMODE)
+#ifdef CONFIG_VIDEOMODE_HELPERS
 int fb_videomode_from_videomode(const struct videomode *vm,
 				struct fb_videomode *fbmode)
 {
@@ -1424,9 +1424,8 @@ int fb_videomode_from_videomode(const struct videomode *vm,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
-#endif
 
-#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+#ifdef CONFIG_OF
 static inline void dump_fb_videomode(const struct fb_videomode *m)
 {
 	pr_debug("fb_videomode = %ux%u@%uHz (%ukHz) %u %u %u %u %u %u %u %u %u\n",
@@ -1465,7 +1464,8 @@ int of_get_fb_videomode(struct device_node *np, struct fb_videomode *fb,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(of_get_fb_videomode);
-#endif
+#endif /* CONFIG_OF */
+#endif /* CONFIG_VIDEOMODE_HELPERS */
 
 #else
 int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
-- 
cgit v1.2.3-70-g09d2


From 06a3307975aac2d5b5a0e0f2e05d23e769f176b4 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 12 Mar 2013 10:26:45 +0200
Subject: videomode: combine videomode dmt_flags and data_flags

Both videomode and display_timing contain flags describing the modes.
These are stored in dmt_flags and data_flags. There's no need to
separate these flags, and having separate fields just makes the flags
more difficult to use.

This patch combines the fields and renames VESA_DMT_* flags to
DISPLAY_FLAGS_*.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 drivers/gpu/drm/drm_modes.c       | 12 ++++++------
 drivers/video/fbmon.c             |  8 ++++----
 drivers/video/of_display_timing.c | 19 +++++++++----------
 drivers/video/videomode.c         |  3 +--
 include/video/display_timing.h    | 26 +++++++++++---------------
 include/video/videomode.h         |  3 +--
 6 files changed, 32 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 0698c0e9bc2..f83f0719922 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -523,17 +523,17 @@ int drm_display_mode_from_videomode(const struct videomode *vm,
 	dmode->clock = vm->pixelclock / 1000;
 
 	dmode->flags = 0;
-	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
 		dmode->flags |= DRM_MODE_FLAG_PHSYNC;
-	else if (vm->dmt_flags & VESA_DMT_HSYNC_LOW)
+	else if (vm->flags & DISPLAY_FLAGS_HSYNC_LOW)
 		dmode->flags |= DRM_MODE_FLAG_NHSYNC;
-	if (vm->dmt_flags & VESA_DMT_VSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH)
 		dmode->flags |= DRM_MODE_FLAG_PVSYNC;
-	else if (vm->dmt_flags & VESA_DMT_VSYNC_LOW)
+	else if (vm->flags & DISPLAY_FLAGS_VSYNC_LOW)
 		dmode->flags |= DRM_MODE_FLAG_NVSYNC;
-	if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
+	if (vm->flags & DISPLAY_FLAGS_INTERLACED)
 		dmode->flags |= DRM_MODE_FLAG_INTERLACE;
-	if (vm->data_flags & DISPLAY_FLAGS_DOUBLESCAN)
+	if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)
 		dmode->flags |= DRM_MODE_FLAG_DBLSCAN;
 	drm_mode_set_name(dmode);
 
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 368cedfeaf1..e5cc2fdb4c8 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -1398,13 +1398,13 @@ int fb_videomode_from_videomode(const struct videomode *vm,
 
 	fbmode->sync = 0;
 	fbmode->vmode = 0;
-	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
 		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
-	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
 		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
-	if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
+	if (vm->flags & DISPLAY_FLAGS_INTERLACED)
 		fbmode->vmode |= FB_VMODE_INTERLACED;
-	if (vm->data_flags & DISPLAY_FLAGS_DOUBLESCAN)
+	if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)
 		fbmode->vmode |= FB_VMODE_DOUBLE;
 	fbmode->flag = 0;
 
diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c
index 13ecd989701..56009bc02b0 100644
--- a/drivers/video/of_display_timing.c
+++ b/drivers/video/of_display_timing.c
@@ -79,25 +79,24 @@ static struct display_timing *of_get_display_timing(struct device_node *np)
 	ret |= parse_timing_property(np, "vsync-len", &dt->vsync_len);
 	ret |= parse_timing_property(np, "clock-frequency", &dt->pixelclock);
 
-	dt->dmt_flags = 0;
-	dt->data_flags = 0;
+	dt->flags = 0;
 	if (!of_property_read_u32(np, "vsync-active", &val))
-		dt->dmt_flags |= val ? VESA_DMT_VSYNC_HIGH :
-				VESA_DMT_VSYNC_LOW;
+		dt->flags |= val ? DISPLAY_FLAGS_VSYNC_HIGH :
+				DISPLAY_FLAGS_VSYNC_LOW;
 	if (!of_property_read_u32(np, "hsync-active", &val))
-		dt->dmt_flags |= val ? VESA_DMT_HSYNC_HIGH :
-				VESA_DMT_HSYNC_LOW;
+		dt->flags |= val ? DISPLAY_FLAGS_HSYNC_HIGH :
+				DISPLAY_FLAGS_HSYNC_LOW;
 	if (!of_property_read_u32(np, "de-active", &val))
-		dt->data_flags |= val ? DISPLAY_FLAGS_DE_HIGH :
+		dt->flags |= val ? DISPLAY_FLAGS_DE_HIGH :
 				DISPLAY_FLAGS_DE_LOW;
 	if (!of_property_read_u32(np, "pixelclk-active", &val))
-		dt->data_flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE :
+		dt->flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE :
 				DISPLAY_FLAGS_PIXDATA_NEGEDGE;
 
 	if (of_property_read_bool(np, "interlaced"))
-		dt->data_flags |= DISPLAY_FLAGS_INTERLACED;
+		dt->flags |= DISPLAY_FLAGS_INTERLACED;
 	if (of_property_read_bool(np, "doublescan"))
-		dt->data_flags |= DISPLAY_FLAGS_DOUBLESCAN;
+		dt->flags |= DISPLAY_FLAGS_DOUBLESCAN;
 
 	if (ret) {
 		pr_err("%s: error reading timing properties\n",
diff --git a/drivers/video/videomode.c b/drivers/video/videomode.c
index 21c47a202af..810afff79bc 100644
--- a/drivers/video/videomode.c
+++ b/drivers/video/videomode.c
@@ -31,8 +31,7 @@ int videomode_from_timing(const struct display_timings *disp,
 	vm->vback_porch = display_timing_get_value(&dt->vback_porch, TE_TYP);
 	vm->vsync_len = display_timing_get_value(&dt->vsync_len, TE_TYP);
 
-	vm->dmt_flags = dt->dmt_flags;
-	vm->data_flags = dt->data_flags;
+	vm->flags = dt->flags;
 
 	return 0;
 }
diff --git a/include/video/display_timing.h b/include/video/display_timing.h
index 71e9a383a98..a8a4be5b0af 100644
--- a/include/video/display_timing.h
+++ b/include/video/display_timing.h
@@ -12,19 +12,16 @@
 #include <linux/bitops.h>
 #include <linux/types.h>
 
-/* VESA display monitor timing parameters */
-#define VESA_DMT_HSYNC_LOW		BIT(0)
-#define VESA_DMT_HSYNC_HIGH		BIT(1)
-#define VESA_DMT_VSYNC_LOW		BIT(2)
-#define VESA_DMT_VSYNC_HIGH		BIT(3)
-
-/* display specific flags */
-#define DISPLAY_FLAGS_DE_LOW		BIT(0)	/* data enable flag */
-#define DISPLAY_FLAGS_DE_HIGH		BIT(1)
-#define DISPLAY_FLAGS_PIXDATA_POSEDGE	BIT(2)	/* drive data on pos. edge */
-#define DISPLAY_FLAGS_PIXDATA_NEGEDGE	BIT(3)	/* drive data on neg. edge */
-#define DISPLAY_FLAGS_INTERLACED	BIT(4)
-#define DISPLAY_FLAGS_DOUBLESCAN	BIT(5)
+#define DISPLAY_FLAGS_HSYNC_LOW		BIT(0)
+#define DISPLAY_FLAGS_HSYNC_HIGH	BIT(1)
+#define DISPLAY_FLAGS_VSYNC_LOW		BIT(2)
+#define DISPLAY_FLAGS_VSYNC_HIGH	BIT(3)
+#define DISPLAY_FLAGS_DE_LOW		BIT(4)	/* data enable flag */
+#define DISPLAY_FLAGS_DE_HIGH		BIT(5)
+#define DISPLAY_FLAGS_PIXDATA_POSEDGE	BIT(6)	/* drive data on pos. edge */
+#define DISPLAY_FLAGS_PIXDATA_NEGEDGE	BIT(7)	/* drive data on neg. edge */
+#define DISPLAY_FLAGS_INTERLACED	BIT(8)
+#define DISPLAY_FLAGS_DOUBLESCAN	BIT(9)
 
 /*
  * A single signal can be specified via a range of minimal and maximal values
@@ -72,8 +69,7 @@ struct display_timing {
 	struct timing_entry vback_porch;	/* ver. back porch */
 	struct timing_entry vsync_len;		/* ver. sync len */
 
-	unsigned int dmt_flags;			/* VESA DMT flags */
-	unsigned int data_flags;		/* video data flags */
+	unsigned int flags;			/* display flags */
 };
 
 /*
diff --git a/include/video/videomode.h b/include/video/videomode.h
index a42156234dd..f4ae6edfeb0 100644
--- a/include/video/videomode.h
+++ b/include/video/videomode.h
@@ -29,8 +29,7 @@ struct videomode {
 	u32 vback_porch;
 	u32 vsync_len;
 
-	unsigned int dmt_flags;	/* VESA DMT flags */
-	unsigned int data_flags; /* video data flags */
+	unsigned int flags; /* display flags */
 };
 
 /**
-- 
cgit v1.2.3-70-g09d2


From 32ed6ef133f95f960d19e3f3b30246aebf8ecd36 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 12 Mar 2013 10:31:29 +0200
Subject: videomode: create enum for videomode's display flags

Instead of having plain defines for the videomode's flags, add an enum
for the flags. This makes the flags clearer to use, as the enum tells
which values can be used with the flags field.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 include/video/display_timing.h | 28 +++++++++++++++++-----------
 include/video/videomode.h      |  2 +-
 2 files changed, 18 insertions(+), 12 deletions(-)

diff --git a/include/video/display_timing.h b/include/video/display_timing.h
index a8a4be5b0af..b63471d1409 100644
--- a/include/video/display_timing.h
+++ b/include/video/display_timing.h
@@ -12,16 +12,22 @@
 #include <linux/bitops.h>
 #include <linux/types.h>
 
-#define DISPLAY_FLAGS_HSYNC_LOW		BIT(0)
-#define DISPLAY_FLAGS_HSYNC_HIGH	BIT(1)
-#define DISPLAY_FLAGS_VSYNC_LOW		BIT(2)
-#define DISPLAY_FLAGS_VSYNC_HIGH	BIT(3)
-#define DISPLAY_FLAGS_DE_LOW		BIT(4)	/* data enable flag */
-#define DISPLAY_FLAGS_DE_HIGH		BIT(5)
-#define DISPLAY_FLAGS_PIXDATA_POSEDGE	BIT(6)	/* drive data on pos. edge */
-#define DISPLAY_FLAGS_PIXDATA_NEGEDGE	BIT(7)	/* drive data on neg. edge */
-#define DISPLAY_FLAGS_INTERLACED	BIT(8)
-#define DISPLAY_FLAGS_DOUBLESCAN	BIT(9)
+enum display_flags {
+	DISPLAY_FLAGS_HSYNC_LOW		= BIT(0),
+	DISPLAY_FLAGS_HSYNC_HIGH	= BIT(1),
+	DISPLAY_FLAGS_VSYNC_LOW		= BIT(2),
+	DISPLAY_FLAGS_VSYNC_HIGH	= BIT(3),
+
+	/* data enable flag */
+	DISPLAY_FLAGS_DE_LOW		= BIT(4),
+	DISPLAY_FLAGS_DE_HIGH		= BIT(5),
+	/* drive data on pos. edge */
+	DISPLAY_FLAGS_PIXDATA_POSEDGE	= BIT(6),
+	/* drive data on neg. edge */
+	DISPLAY_FLAGS_PIXDATA_NEGEDGE	= BIT(7),
+	DISPLAY_FLAGS_INTERLACED	= BIT(8),
+	DISPLAY_FLAGS_DOUBLESCAN	= BIT(9),
+};
 
 /*
  * A single signal can be specified via a range of minimal and maximal values
@@ -69,7 +75,7 @@ struct display_timing {
 	struct timing_entry vback_porch;	/* ver. back porch */
 	struct timing_entry vsync_len;		/* ver. sync len */
 
-	unsigned int flags;			/* display flags */
+	enum display_flags flags;		/* display flags */
 };
 
 /*
diff --git a/include/video/videomode.h b/include/video/videomode.h
index f4ae6edfeb0..8b12e60b617 100644
--- a/include/video/videomode.h
+++ b/include/video/videomode.h
@@ -29,7 +29,7 @@ struct videomode {
 	u32 vback_porch;
 	u32 vsync_len;
 
-	unsigned int flags; /* display flags */
+	enum display_flags flags; /* display flags */
 };
 
 /**
-- 
cgit v1.2.3-70-g09d2


From 694f050650798b82f2c7b9983e80117d58b34bf3 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 12 Mar 2013 10:35:16 +0200
Subject: videomode: remove timing_entry_index

Display timing's fields have minimum, typical and maximum values. These
can be accessed by using timing_entry_index enum, and
display_timing_get_value() function.

There's no real need for this extra complexity. The values can be
accessed more easily by just using the min/typ/max fields.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 drivers/video/videomode.c      | 18 +++++++++---------
 include/video/display_timing.h | 25 -------------------------
 2 files changed, 9 insertions(+), 34 deletions(-)

diff --git a/drivers/video/videomode.c b/drivers/video/videomode.c
index 810afff79bc..a3d95f263cd 100644
--- a/drivers/video/videomode.c
+++ b/drivers/video/videomode.c
@@ -20,16 +20,16 @@ int videomode_from_timing(const struct display_timings *disp,
 	if (!dt)
 		return -EINVAL;
 
-	vm->pixelclock = display_timing_get_value(&dt->pixelclock, TE_TYP);
-	vm->hactive = display_timing_get_value(&dt->hactive, TE_TYP);
-	vm->hfront_porch = display_timing_get_value(&dt->hfront_porch, TE_TYP);
-	vm->hback_porch = display_timing_get_value(&dt->hback_porch, TE_TYP);
-	vm->hsync_len = display_timing_get_value(&dt->hsync_len, TE_TYP);
+	vm->pixelclock = dt->pixelclock.typ;
+	vm->hactive = dt->hactive.typ;
+	vm->hfront_porch = dt->hfront_porch.typ;
+	vm->hback_porch = dt->hback_porch.typ;
+	vm->hsync_len = dt->hsync_len.typ;
 
-	vm->vactive = display_timing_get_value(&dt->vactive, TE_TYP);
-	vm->vfront_porch = display_timing_get_value(&dt->vfront_porch, TE_TYP);
-	vm->vback_porch = display_timing_get_value(&dt->vback_porch, TE_TYP);
-	vm->vsync_len = display_timing_get_value(&dt->vsync_len, TE_TYP);
+	vm->vactive = dt->vactive.typ;
+	vm->vfront_porch = dt->vfront_porch.typ;
+	vm->vback_porch = dt->vback_porch.typ;
+	vm->vsync_len = dt->vsync_len.typ;
 
 	vm->flags = dt->flags;
 
diff --git a/include/video/display_timing.h b/include/video/display_timing.h
index b63471d1409..5d0259b08e0 100644
--- a/include/video/display_timing.h
+++ b/include/video/display_timing.h
@@ -39,12 +39,6 @@ struct timing_entry {
 	u32 max;
 };
 
-enum timing_entry_index {
-	TE_MIN = 0,
-	TE_TYP = 1,
-	TE_MAX = 2,
-};
-
 /*
  * Single "mode" entry. This describes one set of signal timings a display can
  * have in one setting. This struct can later be converted to struct videomode
@@ -91,25 +85,6 @@ struct display_timings {
 	struct display_timing **timings;
 };
 
-/* get value specified by index from struct timing_entry */
-static inline u32 display_timing_get_value(const struct timing_entry *te,
-					   enum timing_entry_index index)
-{
-	switch (index) {
-	case TE_MIN:
-		return te->min;
-		break;
-	case TE_TYP:
-		return te->typ;
-		break;
-	case TE_MAX:
-		return te->max;
-		break;
-	default:
-		return te->typ;
-	}
-}
-
 /* get one entry from struct display_timings */
 static inline struct display_timing *display_timings_get(const struct
 							 display_timings *disp,
-- 
cgit v1.2.3-70-g09d2


From 6cd2c7db41eab204b6474534df4ca68a7dc53d86 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 21 Mar 2013 14:20:12 +0200
Subject: videomode: videomode_from_timing work

We currently have videomode_from_timing(), which takes one
display_timing entry from display_timings.

To make it easier to use display_timing without display_timings, this
patch renames videomode_from_timing() to videomode_from_timings(), and
adds a new videomode_from_timing() which just converts a given
display_timing to videomode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 drivers/gpu/drm/tilcdc/tilcdc_panel.c |  2 +-
 drivers/video/of_videomode.c          |  2 +-
 drivers/video/videomode.c             | 25 ++++++++++++++++---------
 include/video/videomode.h             | 15 +++++++++++++--
 4 files changed, 31 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_panel.c b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
index 580b74e2022..90ee4978637 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_panel.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
@@ -173,7 +173,7 @@ static int panel_connector_get_modes(struct drm_connector *connector)
 		struct drm_display_mode *mode = drm_mode_create(dev);
 		struct videomode vm;
 
-		if (videomode_from_timing(timings, &vm, i))
+		if (videomode_from_timings(timings, &vm, i))
 			break;
 
 		drm_display_mode_from_videomode(&vm, mode);
diff --git a/drivers/video/of_videomode.c b/drivers/video/of_videomode.c
index 5b8066cd397..111c2d1911d 100644
--- a/drivers/video/of_videomode.c
+++ b/drivers/video/of_videomode.c
@@ -43,7 +43,7 @@ int of_get_videomode(struct device_node *np, struct videomode *vm,
 	if (index == OF_USE_NATIVE_MODE)
 		index = disp->native_mode;
 
-	ret = videomode_from_timing(disp, vm, index);
+	ret = videomode_from_timings(disp, vm, index);
 	if (ret)
 		return ret;
 
diff --git a/drivers/video/videomode.c b/drivers/video/videomode.c
index a3d95f263cd..df375c96c5d 100644
--- a/drivers/video/videomode.c
+++ b/drivers/video/videomode.c
@@ -11,15 +11,9 @@
 #include <video/display_timing.h>
 #include <video/videomode.h>
 
-int videomode_from_timing(const struct display_timings *disp,
-			  struct videomode *vm, unsigned int index)
+void videomode_from_timing(const struct display_timing *dt,
+			  struct videomode *vm)
 {
-	struct display_timing *dt;
-
-	dt = display_timings_get(disp, index);
-	if (!dt)
-		return -EINVAL;
-
 	vm->pixelclock = dt->pixelclock.typ;
 	vm->hactive = dt->hactive.typ;
 	vm->hfront_porch = dt->hfront_porch.typ;
@@ -32,7 +26,20 @@ int videomode_from_timing(const struct display_timings *disp,
 	vm->vsync_len = dt->vsync_len.typ;
 
 	vm->flags = dt->flags;
+}
+EXPORT_SYMBOL_GPL(videomode_from_timing);
+
+int videomode_from_timings(const struct display_timings *disp,
+			  struct videomode *vm, unsigned int index)
+{
+	struct display_timing *dt;
+
+	dt = display_timings_get(disp, index);
+	if (!dt)
+		return -EINVAL;
+
+	videomode_from_timing(dt, vm);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(videomode_from_timing);
+EXPORT_SYMBOL_GPL(videomode_from_timings);
diff --git a/include/video/videomode.h b/include/video/videomode.h
index 8b12e60b617..3f1049d870d 100644
--- a/include/video/videomode.h
+++ b/include/video/videomode.h
@@ -34,14 +34,25 @@ struct videomode {
 
 /**
  * videomode_from_timing - convert display timing to videomode
+ * @dt: display_timing structure
+ * @vm: return value
+ *
+ * DESCRIPTION:
+ * This function converts a struct display_timing to a struct videomode.
+ */
+void videomode_from_timing(const struct display_timing *dt,
+			  struct videomode *vm);
+
+/**
+ * videomode_from_timings - convert one display timings entry to videomode
  * @disp: structure with all possible timing entries
  * @vm: return value
  * @index: index into the list of display timings in devicetree
  *
  * DESCRIPTION:
- * This function converts a struct display_timing to a struct videomode.
+ * This function converts one struct display_timing entry to a struct videomode.
  */
-int videomode_from_timing(const struct display_timings *disp,
+int videomode_from_timings(const struct display_timings *disp,
 			  struct videomode *vm, unsigned int index);
 
 #endif
-- 
cgit v1.2.3-70-g09d2


From 18a434b5720754f6e584667dbf52fb0fa99de582 Mon Sep 17 00:00:00 2001
From: Tony Prisk <linux@prisktech.co.nz>
Date: Wed, 3 Apr 2013 07:20:33 +1300
Subject: video: vt8500: Make wmt_ge_rops optional

wmt_ge_rops is a seperate driver to vt8500/wm8505 framebuffer
driver but is currently a required option. This patch makes
accelerated raster ops optional.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/Kconfig       | 22 ++++++++++++----------
 drivers/video/wmt_ge_rops.h | 23 +++++++++++++++++++++++
 2 files changed, 35 insertions(+), 10 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4c1546f71d5..661aa54dcb1 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -212,14 +212,6 @@ config FB_SYS_FOPS
        depends on FB
        default n
 
-config FB_WMT_GE_ROPS
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include functions for accelerated rectangle filling and area
-	  copying using WonderMedia Graphics Engine operations.
-
 config FB_DEFERRED_IO
 	bool
 	depends on FB
@@ -1799,7 +1791,8 @@ config FB_AU1200
 config FB_VT8500
 	bool "VT8500 LCD Driver"
 	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_WMT_GE_ROPS
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
 	  This is the framebuffer driver for VIA VT8500 integrated LCD
@@ -1808,12 +1801,21 @@ config FB_VT8500
 config FB_WM8505
 	bool "WM8505 frame buffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_WMT_GE_ROPS
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
 	  This is the framebuffer driver for WonderMedia WM8505/WM8650
 	  integrated LCD controller.
 
+config FB_WMT_GE_ROPS
+	bool "VT8500/WM85xx accelerated raster ops support"
+	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
+	default n
+	help
+	  This adds support for accelerated raster operations on the
+	  VIA VT8500 and Wondermedia 85xx series SoCs.
+
 source "drivers/video/geode/Kconfig"
 
 config FB_HIT
diff --git a/drivers/video/wmt_ge_rops.h b/drivers/video/wmt_ge_rops.h
index 87380751a44..f73ec6377a4 100644
--- a/drivers/video/wmt_ge_rops.h
+++ b/drivers/video/wmt_ge_rops.h
@@ -1,5 +1,28 @@
+#ifdef CONFIG_FB_WMT_GE_ROPS
+
 extern void wmt_ge_fillrect(struct fb_info *info,
 			    const struct fb_fillrect *rect);
 extern void wmt_ge_copyarea(struct fb_info *info,
 			    const struct fb_copyarea *area);
 extern int wmt_ge_sync(struct fb_info *info);
+
+#else
+
+static inline int wmt_ge_sync(struct fb_info *p)
+{
+	return 0;
+}
+
+static inline void wmt_ge_fillrect(struct fb_info *p,
+				    const struct fb_fillrect *rect)
+{
+	sys_fillrect(p, rect);
+}
+
+static inline void wmt_ge_copyarea(struct fb_info *p,
+				     const struct fb_copyarea *area)
+{
+	sys_copyarea(p, area);
+}
+
+#endif
-- 
cgit v1.2.3-70-g09d2


From 3af4ae1e4b57a663fff9cfe711c84fefb6ec966f Mon Sep 17 00:00:00 2001
From: Tony Prisk <linux@prisktech.co.nz>
Date: Wed, 3 Apr 2013 07:20:34 +1300
Subject: video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h

With the conversion to devicetree only for arch-vt8500, this
header is no longer required. This patch removes the #include
from the two framebuffer drivers that used it, and the header file.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/vt8500lcdfb.c                     |  2 --
 drivers/video/wm8505fb.c                        |  2 --
 include/linux/platform_data/video-vt8500lcdfb.h | 31 -------------------------
 3 files changed, 35 deletions(-)
 delete mode 100644 include/linux/platform_data/video-vt8500lcdfb.h

diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
index aa2579c2364..2ff2312a16a 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/vt8500lcdfb.c
@@ -30,8 +30,6 @@
 #include <linux/platform_device.h>
 #include <linux/wait.h>
 
-#include <linux/platform_data/video-vt8500lcdfb.h>
-
 #include "vt8500lcdfb.h"
 #include "wmt_ge_rops.h"
 
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 4dd0580f96f..fe9afd60a01 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -32,8 +32,6 @@
 #include <linux/of_fdt.h>
 #include <linux/memblock.h>
 
-#include <linux/platform_data/video-vt8500lcdfb.h>
-
 #include "wm8505fb_regs.h"
 #include "wmt_ge_rops.h"
 
diff --git a/include/linux/platform_data/video-vt8500lcdfb.h b/include/linux/platform_data/video-vt8500lcdfb.h
deleted file mode 100644
index 7f399c370fe..00000000000
--- a/include/linux/platform_data/video-vt8500lcdfb.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  VT8500/WM8505 Frame Buffer platform data definitions
- *
- *  Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _VT8500FB_H
-#define _VT8500FB_H
-
-#include <linux/fb.h>
-
-struct vt8500fb_platform_data {
-	struct fb_videomode	mode;
-	u32			xres_virtual;
-	u32			yres_virtual;
-	u32			bpp;
-	unsigned long		video_mem_phys;
-	void			*video_mem_virt;
-	unsigned long		video_mem_len;
-};
-
-#endif /* _VT8500FB_H */
-- 
cgit v1.2.3-70-g09d2


From 3d20837dd6bd2891d5788c0a574edaf2b54fc377 Mon Sep 17 00:00:00 2001
From: Tony Prisk <linux@prisktech.co.nz>
Date: Wed, 3 Apr 2013 07:20:35 +1300
Subject: video: vt8500: Correct descriptions in video/Kconfig

This patch corrects the descriptions for the VIA VT8500 and
Wondermedia WM8xxx-series framebuffer drivers to correctly reflect
which hardware they support.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/Kconfig | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 661aa54dcb1..ad762ed2c5a 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1789,7 +1789,7 @@ config FB_AU1200
 	  option au1200fb:panel=<name>.
 
 config FB_VT8500
-	bool "VT8500 LCD Driver"
+	bool "VIA VT8500 framebuffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
@@ -1799,17 +1799,18 @@ config FB_VT8500
 	  controller.
 
 config FB_WM8505
-	bool "WM8505 frame buffer support"
+	bool "Wondermedia WM8xxx-series frame buffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
-	  This is the framebuffer driver for WonderMedia WM8505/WM8650
-	  integrated LCD controller.
+	  This is the framebuffer driver for WonderMedia WM8xxx-series
+	  integrated LCD controller. This driver covers the WM8505, WM8650
+	  and WM8850 SoCs.
 
 config FB_WMT_GE_ROPS
-	bool "VT8500/WM85xx accelerated raster ops support"
+	bool "VT8500/WM8xxx accelerated raster ops support"
 	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
 	default n
 	help
-- 
cgit v1.2.3-70-g09d2


From 9e340fdc5af6ae3041d73319bbd1438c7d6d566c Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Wed, 3 Apr 2013 07:20:36 +1300
Subject: drivers/video/wm8505fb.c: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

The patch makes some other cleanups.  First, the original code used
devm_kzalloc, but kfree.  This would lead to a double free.  The problem
was found using the following semantic match (http://coccinelle.lip6.fr/):

// <smpl>
@@
expression x,e;
@@
x = devm_kzalloc(...)
... when != x = e
?-kfree(x,...);
// </smpl>

The error-handing code of devm_request_and_ioremap does not print any
warning message, because devm_request_and_ioremap does this.

The call to dma_alloc_coherent is converted to its devm equivalent,
dmam_alloc_coherent.  This implicitly introduces a call to
dmam_free_coherent, which was completly missing in the original code.

A semicolon is removed at the end of the error-handling code for the call
to dma_alloc_coherent.

The block of code calling fb_alloc_cmap is moved below the block of code
calling wm8505fb_set_par, so that the error-handing code of the call to
wm8505fb_set_par can just return ret.  This way there is only one block of
error-handling code that needs to call fb_dealloc_cmap, and so this is
moved up to the place where it is needed, eliminating the need for all
gotos and labels in the function.  This was suggested by Tony Prisk.

The initializations of fbi and ret at the beginning of the function are not
necessary and are removed.  The call platform_set_drvdata(pdev, NULL); at
the end of the function is also removed.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/wm8505fb.c | 79 ++++++++++++------------------------------------
 1 file changed, 19 insertions(+), 60 deletions(-)

diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index fe9afd60a01..020df1ddb67 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -272,15 +272,11 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	unsigned long fb_mem_len;
 	void *fb_mem_virt;
 
-	ret = -ENOMEM;
-	fbi = NULL;
-
 	fbi = devm_kzalloc(&pdev->dev, sizeof(struct wm8505fb_info) +
 			sizeof(u32) * 16, GFP_KERNEL);
 	if (!fbi) {
 		dev_err(&pdev->dev, "Failed to initialize framebuffer device\n");
-		ret = -ENOMEM;
-		goto failed;
+		return -ENOMEM;
 	}
 
 	strcpy(fbi->fb.fix.id, DRIVER_NAME);
@@ -306,31 +302,14 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.pseudo_palette	= addr;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no I/O memory resource defined\n");
-		ret = -ENODEV;
-		goto failed_fbi;
-	}
-
-	res = request_mem_region(res->start, resource_size(res), DRIVER_NAME);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		ret = -EBUSY;
-		goto failed_fbi;
-	}
-
-	fbi->regbase = ioremap(res->start, resource_size(res));
-	if (fbi->regbase == NULL) {
-		dev_err(&pdev->dev, "failed to map I/O memory\n");
-		ret = -EBUSY;
-		goto failed_free_res;
-	}
+	fbi->regbase = devm_request_and_ioremap(&pdev->dev, res);
+	if (fbi->regbase == NULL)
+		return -EBUSY;
 
 	np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0);
 	if (!np) {
 		pr_err("%s: No display description in Device Tree\n", __func__);
-		ret = -EINVAL;
-		goto failed_free_res;
+		return -EINVAL;
 	}
 
 	/*
@@ -349,7 +328,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	ret |= of_property_read_u32(np, "bpp", &bpp);
 	if (ret) {
 		pr_err("%s: Unable to read display properties\n", __func__);
-		goto failed_free_res;
+		return -EINVAL;
 	}
 
 	of_mode.vmode = FB_VMODE_NONINTERLACED;
@@ -363,12 +342,12 @@ static int wm8505fb_probe(struct platform_device *pdev)
 
 	/* try allocating the framebuffer */
 	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
-	fb_mem_virt = dma_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
+	fb_mem_virt = dmam_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
 				GFP_KERNEL);
 	if (!fb_mem_virt) {
 		pr_err("%s: Failed to allocate framebuffer\n", __func__);
 		return -ENOMEM;
-	};
+	}
 
 	fbi->fb.var.xres_virtual	= of_mode.xres;
 	fbi->fb.var.yres_virtual	= of_mode.yres * 2;
@@ -379,28 +358,29 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.screen_base		= fb_mem_virt;
 	fbi->fb.screen_size		= fb_mem_len;
 
-	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
-		dev_err(&pdev->dev, "Failed to allocate color map\n");
-		ret = -ENOMEM;
-		goto failed_free_io;
-	}
-
-	wm8505fb_init_hw(&fbi->fb);
-
 	fbi->contrast = 0x80;
 	ret = wm8505fb_set_par(&fbi->fb);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to set parameters\n");
-		goto failed_free_cmap;
+		return ret;
 	}
 
+	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
+		dev_err(&pdev->dev, "Failed to allocate color map\n");
+		return -ENOMEM;
+	}
+
+	wm8505fb_init_hw(&fbi->fb);
+
 	platform_set_drvdata(pdev, fbi);
 
 	ret = register_framebuffer(&fbi->fb);
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"Failed to register framebuffer device: %d\n", ret);
-		goto failed_free_cmap;
+		if (fbi->fb.cmap.len)
+			fb_dealloc_cmap(&fbi->fb.cmap);
+		return ret;
 	}
 
 	ret = device_create_file(&pdev->dev, &dev_attr_contrast);
@@ -414,25 +394,11 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	       fbi->fb.fix.smem_start + fbi->fb.fix.smem_len - 1);
 
 	return 0;
-
-failed_free_cmap:
-	if (fbi->fb.cmap.len)
-		fb_dealloc_cmap(&fbi->fb.cmap);
-failed_free_io:
-	iounmap(fbi->regbase);
-failed_free_res:
-	release_mem_region(res->start, resource_size(res));
-failed_fbi:
-	platform_set_drvdata(pdev, NULL);
-	kfree(fbi);
-failed:
-	return ret;
 }
 
 static int wm8505fb_remove(struct platform_device *pdev)
 {
 	struct wm8505fb_info *fbi = platform_get_drvdata(pdev);
-	struct resource *res;
 
 	device_remove_file(&pdev->dev, &dev_attr_contrast);
 
@@ -443,13 +409,6 @@ static int wm8505fb_remove(struct platform_device *pdev)
 	if (fbi->fb.cmap.len)
 		fb_dealloc_cmap(&fbi->fb.cmap);
 
-	iounmap(fbi->regbase);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	kfree(fbi);
-
 	return 0;
 }
 
-- 
cgit v1.2.3-70-g09d2


From de68efced121eda500792b42547847636066525e Mon Sep 17 00:00:00 2001
From: Tony Prisk <linux@prisktech.co.nz>
Date: Wed, 3 Apr 2013 07:20:37 +1300
Subject: video: vt8500: Adjust contrast in wm8505 framebuffer driver.

The contrast value was typo'd on the original commit (0x80 instead of
0x08). Following feedback from an enduser, a value of 0x10 seems more
suitable due to the default backlight being <100%.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/wm8505fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 020df1ddb67..e3be1e37d2b 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -358,7 +358,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.screen_base		= fb_mem_virt;
 	fbi->fb.screen_size		= fb_mem_len;
 
-	fbi->contrast = 0x80;
+	fbi->contrast = 0x10;
 	ret = wm8505fb_set_par(&fbi->fb);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to set parameters\n");
-- 
cgit v1.2.3-70-g09d2


From 7ab0a48420c95dc4099d1777a5a24dffad102cf1 Mon Sep 17 00:00:00 2001
From: Tony Prisk <linux@prisktech.co.nz>
Date: Wed, 3 Apr 2013 07:20:38 +1300
Subject: video: fb: vt8500: Convert framebuffer drivers to standardized
 binding

Now that a display timing binding is available, convert our almost identical
binding to use the standard binding.

This patch converts the vt8500 and wm8505 framebuffer drivers and
associated dts/dtsi files to use the standard binding as defined in
bindings/video/display-timing.txt.

There are two side-effects of making this conversion:

1) The fb node should now be in the board file, rather than the soc file as
the display-timing node is a child of the fb node.

2) We still require a bits per pixel property to initialize the framebuffer
for the different lcd panels. Rather than including this as part of the
display timing, it is moved into the framebuffer node.

I have also taken the opportunity to alphabetise the includes of each
driver to avoid double-ups.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 .../devicetree/bindings/video/via,vt8500-fb.txt    | 48 ++++------------
 .../devicetree/bindings/video/wm,wm8505-fb.txt     | 32 +++++++----
 arch/arm/boot/dts/vt8500-bv07.dts                  | 34 +++++------
 arch/arm/boot/dts/vt8500.dtsi                      |  4 +-
 arch/arm/boot/dts/wm8505-ref.dts                   | 34 +++++------
 arch/arm/boot/dts/wm8505.dtsi                      |  4 +-
 arch/arm/boot/dts/wm8650-mid.dts                   | 36 ++++++------
 arch/arm/boot/dts/wm8650.dtsi                      |  4 +-
 arch/arm/boot/dts/wm8850-w70v2.dts                 | 40 ++++++-------
 arch/arm/boot/dts/wm8850.dtsi                      |  4 +-
 drivers/video/Kconfig                              |  6 ++
 drivers/video/vt8500lcdfb.c                        | 53 +++++++----------
 drivers/video/wm8505fb.c                           | 67 +++++++++-------------
 13 files changed, 154 insertions(+), 212 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
index c870b6478ec..2871e218a0f 100644
--- a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
+++ b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
@@ -5,58 +5,32 @@ Required properties:
 - compatible : "via,vt8500-fb"
 - reg : Should contain 1 register ranges(address and length)
 - interrupts : framebuffer controller interrupt
-- display: a phandle pointing to the display node
+- bits-per-pixel : bit depth of framebuffer (16 or 32)
 
-Required nodes:
-- display: a display node is required to initialize the lcd panel
-	This should be in the board dts.
-- default-mode: a videomode within the display with timing parameters
-	as specified below.
+Required subnodes:
+- display-timings: see display-timing.txt for information
 
 Example:
 
-	fb@d800e400 {
+	fb@d8050800 {
 		compatible = "via,vt8500-fb";
 		reg = <0xd800e400 0x400>;
 		interrupts = <12>;
-		display = <&display>;
-		default-mode = <&mode0>;
-	};
-
-VIA VT8500 Display
------------------------------------------------------
-Required properties (as per of_videomode_helper):
-
- - hactive, vactive: Display resolution
- - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters
-   in pixels
-   vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in
-   lines
- - clock: displayclock in Hz
- - bpp: lcd panel bit-depth.
-	<16> for RGB565, <32> for RGB888
-
-Optional properties (as per of_videomode_helper):
- - width-mm, height-mm: Display dimensions in mm
- - hsync-active-high (bool): Hsync pulse is active high
- - vsync-active-high (bool): Vsync pulse is active high
- - interlaced (bool): This is an interlaced mode
- - doublescan (bool): This is a doublescan mode
+		bits-per-pixel = <16>;
 
-Example:
-	display: display@0 {
-		modes {
-			mode0: mode@0 {
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 800x480 {
+				clock-frequency = <0>; /* unused but required */
 				hactive = <800>;
 				vactive = <480>;
-				hback-porch = <88>;
 				hfront-porch = <40>;
+				hback-porch = <88>;
 				hsync-len = <0>;
 				vback-porch = <32>;
 				vfront-porch = <11>;
 				vsync-len = <1>;
-				clock = <0>;	/* unused but required */
-				bpp = <16>;	/* non-standard but required */
 			};
 		};
 	};
+
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
index 3d325e1d11e..0bcadb2840a 100644
--- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -4,20 +4,30 @@ Wondermedia WM8505 Framebuffer
 Required properties:
 - compatible : "wm,wm8505-fb"
 - reg : Should contain 1 register ranges(address and length)
-- via,display: a phandle pointing to the display node
+- bits-per-pixel : bit depth of framebuffer (16 or 32)
 
-Required nodes:
-- display: a display node is required to initialize the lcd panel
-	This should be in the board dts. See definition in
-	Documentation/devicetree/bindings/video/via,vt8500-fb.txt
-- default-mode: a videomode node as specified in
-	Documentation/devicetree/bindings/video/via,vt8500-fb.txt
+Required subnodes:
+- display-timings: see display-timing.txt for information
 
 Example:
 
-	fb@d8050800 {
+	fb@d8051700 {
 		compatible = "wm,wm8505-fb";
-		reg = <0xd8050800 0x200>;
-		display = <&display>;
-		default-mode = <&mode0>;
+		reg = <0xd8051700 0x200>;
+		bits-per-pixel = <16>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 800x480 {
+				clock-frequency = <0>; /* unused but required */
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <88>;
+				hsync-len = <0>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+			};
+		};
 	};
diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts
index 567cf4e8ab8..877b33afa7e 100644
--- a/arch/arm/boot/dts/vt8500-bv07.dts
+++ b/arch/arm/boot/dts/vt8500-bv07.dts
@@ -11,26 +11,22 @@
 
 / {
 	model = "Benign BV07 Netbook";
+};
 
-	/*
-	 * Display node is based on Sascha Hauer's patch on dri-devel.
-	 * Added a bpp property to calculate the size of the framebuffer
-	 * until the binding is formalized.
-	 */
-	display: display@0 {
-		modes {
-			mode0: mode@0 {
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hfront-porch = <40>;
-				hsync-len = <0>;
-				vback-porch = <32>;
-				vfront-porch = <11>;
-				vsync-len = <1>;
-				clock = <0>;	/* unused but required */
-				bpp = <16>;	/* non-standard but required */
-			};
+&fb {
+	bits-per-pixel = <16>;
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index cf31ced4660..68c8dc64438 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -98,12 +98,10 @@
 			interrupts = <43>;
 		};
 
-		fb@d800e400 {
+		fb: fb@d8050800 {
 			compatible = "via,vt8500-fb";
 			reg = <0xd800e400 0x400>;
 			interrupts = <12>;
-			display = <&display>;
-			default-mode = <&mode0>;
 		};
 
 		ge_rops@d8050400 {
diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts
index fd4e248074c..edd2cec3d37 100644
--- a/arch/arm/boot/dts/wm8505-ref.dts
+++ b/arch/arm/boot/dts/wm8505-ref.dts
@@ -11,26 +11,22 @@
 
 / {
 	model = "Wondermedia WM8505 Netbook";
+};
 
-	/*
-	 * Display node is based on Sascha Hauer's patch on dri-devel.
-	 * Added a bpp property to calculate the size of the framebuffer
-	 * until the binding is formalized.
-	 */
-	display: display@0 {
-		modes {
-			mode0: mode@0 {
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hfront-porch = <40>;
-				hsync-len = <0>;
-				vback-porch = <32>;
-				vfront-porch = <11>;
-				vsync-len = <1>;
-				clock = <0>;	/* unused but required */
-				bpp = <32>;	/* non-standard but required */
-			};
+&fb {
+	bits-per-pixel = <32>;
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index e74a1c0fb9a..bcf668d31b2 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -128,11 +128,9 @@
 			interrupts = <0>;
 		};
 
-		fb@d8050800 {
+		fb: fb@d8050800 {
 			compatible = "wm,wm8505-fb";
 			reg = <0xd8050800 0x200>;
-			display = <&display>;
-			default-mode = <&mode0>;
 		};
 
 		ge_rops@d8050400 {
diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts
index cefd938f842..61671a0d9ed 100644
--- a/arch/arm/boot/dts/wm8650-mid.dts
+++ b/arch/arm/boot/dts/wm8650-mid.dts
@@ -11,26 +11,24 @@
 
 / {
 	model = "Wondermedia WM8650-MID Tablet";
+};
+
+&fb {
+	bits-per-pixel = <16>;
 
-	/*
-	 * Display node is based on Sascha Hauer's patch on dri-devel.
-	 * Added a bpp property to calculate the size of the framebuffer
-	 * until the binding is formalized.
-	 */
-	display: display@0 {
-		modes {
-			mode0: mode@0 {
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hfront-porch = <40>;
-				hsync-len = <0>;
-				vback-porch = <32>;
-				vfront-porch = <11>;
-				vsync-len = <1>;
-				clock = <0>;	/* unused but required */
-				bpp = <16>;	/* non-standard but required */
-			};
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
 		};
 	};
 };
+
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index db3c0a12e05..9313407bbc3 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -128,11 +128,9 @@
 			interrupts = <43>;
 		};
 
-		fb@d8050800 {
+		fb: fb@d8050800 {
 			compatible = "wm,wm8505-fb";
 			reg = <0xd8050800 0x200>;
-			display = <&display>;
-			default-mode = <&mode0>;
 		};
 
 		ge_rops@d8050400 {
diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts
index fcc660c8954..32d22532cd6 100644
--- a/arch/arm/boot/dts/wm8850-w70v2.dts
+++ b/arch/arm/boot/dts/wm8850-w70v2.dts
@@ -15,28 +15,6 @@
 / {
 	model = "Wondermedia WM8850-W70v2 Tablet";
 
-	/*
-	 * Display node is based on Sascha Hauer's patch on dri-devel.
-	 * Added a bpp property to calculate the size of the framebuffer
-	 * until the binding is formalized.
-	 */
-	display: display@0 {
-		modes {
-			mode0: mode@0 {
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hfront-porch = <40>;
-				hsync-len = <0>;
-				vback-porch = <32>;
-				vfront-porch = <11>;
-				vsync-len = <1>;
-				clock = <0>;	/* unused but required */
-				bpp = <16>;	/* non-standard but required */
-			};
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 50000 1>;	/* duty inverted */
@@ -45,3 +23,21 @@
 		default-brightness-level = <5>;
 	};
 };
+
+&fb {
+	bits-per-pixel = <16>;
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index e8cbfdc87bb..7149cd13e3b 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -135,11 +135,9 @@
 			};
 		};
 
-		fb@d8051700 {
+		fb: fb@d8051700 {
 			compatible = "wm,wm8505-fb";
 			reg = <0xd8051700 0x200>;
-			display = <&display>;
-			default-mode = <&mode0>;
 		};
 
 		ge_rops@d8050400 {
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index ad762ed2c5a..d0c932a8611 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1794,6 +1794,9 @@ config FB_VT8500
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select OF_DISPLAY_TIMING
+	select OF_VIDEOMODE
 	help
 	  This is the framebuffer driver for VIA VT8500 integrated LCD
 	  controller.
@@ -1804,6 +1807,9 @@ config FB_WM8505
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select OF_DISPLAY_TIMING
+	select OF_VIDEOMODE
 	help
 	  This is the framebuffer driver for WonderMedia WM8xxx-series
 	  integrated LCD controller. This driver covers the WM8505, WM8650
diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
index 2ff2312a16a..9547e1831e0 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/vt8500lcdfb.c
@@ -15,20 +15,21 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
 #include <linux/wait.h>
+#include <video/of_display_timing.h>
 
 #include "vt8500lcdfb.h"
 #include "wmt_ge_rops.h"
@@ -275,11 +276,11 @@ static int vt8500lcd_probe(struct platform_device *pdev)
 {
 	struct vt8500lcd_info *fbi;
 	struct resource *res;
+	struct display_timings *disp_timing;
 	void *addr;
 	int irq, ret;
 
 	struct fb_videomode	of_mode;
-	struct device_node	*np;
 	u32			bpp;
 	dma_addr_t fb_mem_phys;
 	unsigned long fb_mem_len;
@@ -344,32 +345,18 @@ static int vt8500lcd_probe(struct platform_device *pdev)
 		goto failed_free_res;
 	}
 
-	np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0);
-	if (!np) {
-		pr_err("%s: No display description in Device Tree\n", __func__);
-		ret = -EINVAL;
-		goto failed_free_res;
-	}
+	disp_timing = of_get_display_timings(pdev->dev.of_node);
+	if (!disp_timing)
+		return -EINVAL;
 
-	/*
-	 * This code is copied from Sascha Hauer's of_videomode helper
-	 * and can be replaced with a call to the helper once mainlined
-	 */
-	ret = 0;
-	ret |= of_property_read_u32(np, "hactive", &of_mode.xres);
-	ret |= of_property_read_u32(np, "vactive", &of_mode.yres);
-	ret |= of_property_read_u32(np, "hback-porch", &of_mode.left_margin);
-	ret |= of_property_read_u32(np, "hfront-porch", &of_mode.right_margin);
-	ret |= of_property_read_u32(np, "hsync-len", &of_mode.hsync_len);
-	ret |= of_property_read_u32(np, "vback-porch", &of_mode.upper_margin);
-	ret |= of_property_read_u32(np, "vfront-porch", &of_mode.lower_margin);
-	ret |= of_property_read_u32(np, "vsync-len", &of_mode.vsync_len);
-	ret |= of_property_read_u32(np, "bpp", &bpp);
-	if (ret) {
-		pr_err("%s: Unable to read display properties\n", __func__);
-		goto failed_free_res;
-	}
-	of_mode.vmode = FB_VMODE_NONINTERLACED;
+	ret = of_get_fb_videomode(pdev->dev.of_node, &of_mode,
+							OF_USE_NATIVE_MODE);
+	if (ret)
+		return ret;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "bits-per-pixel", &bpp);
+	if (ret)
+		return ret;
 
 	/* try allocating the framebuffer */
 	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index e3be1e37d2b..19e2e7ff492 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -14,23 +14,24 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/fb.h>
+#include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/wait.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
-#include <linux/memblock.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <video/of_display_timing.h>
 
 #include "wm8505fb_regs.h"
 #include "wmt_ge_rops.h"
@@ -261,12 +262,12 @@ static struct fb_ops wm8505fb_ops = {
 static int wm8505fb_probe(struct platform_device *pdev)
 {
 	struct wm8505fb_info	*fbi;
-	struct resource		*res;
+	struct resource	*res;
+	struct display_timings *disp_timing;
 	void			*addr;
 	int ret;
 
-	struct fb_videomode	of_mode;
-	struct device_node	*np;
+	struct fb_videomode	mode;
 	u32			bpp;
 	dma_addr_t fb_mem_phys;
 	unsigned long fb_mem_len;
@@ -306,33 +307,19 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	if (fbi->regbase == NULL)
 		return -EBUSY;
 
-	np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0);
-	if (!np) {
-		pr_err("%s: No display description in Device Tree\n", __func__);
+	disp_timing = of_get_display_timings(pdev->dev.of_node);
+	if (!disp_timing)
 		return -EINVAL;
-	}
 
-	/*
-	 * This code is copied from Sascha Hauer's of_videomode helper
-	 * and can be replaced with a call to the helper once mainlined
-	 */
-	ret = 0;
-	ret |= of_property_read_u32(np, "hactive", &of_mode.xres);
-	ret |= of_property_read_u32(np, "vactive", &of_mode.yres);
-	ret |= of_property_read_u32(np, "hback-porch", &of_mode.left_margin);
-	ret |= of_property_read_u32(np, "hfront-porch", &of_mode.right_margin);
-	ret |= of_property_read_u32(np, "hsync-len", &of_mode.hsync_len);
-	ret |= of_property_read_u32(np, "vback-porch", &of_mode.upper_margin);
-	ret |= of_property_read_u32(np, "vfront-porch", &of_mode.lower_margin);
-	ret |= of_property_read_u32(np, "vsync-len", &of_mode.vsync_len);
-	ret |= of_property_read_u32(np, "bpp", &bpp);
-	if (ret) {
-		pr_err("%s: Unable to read display properties\n", __func__);
-		return -EINVAL;
-	}
+	ret = of_get_fb_videomode(pdev->dev.of_node, &mode, OF_USE_NATIVE_MODE);
+	if (ret)
+		return ret;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "bits-per-pixel", &bpp);
+	if (ret)
+		return ret;
 
-	of_mode.vmode = FB_VMODE_NONINTERLACED;
-	fb_videomode_to_var(&fbi->fb.var, &of_mode);
+	fb_videomode_to_var(&fbi->fb.var, &mode);
 
 	fbi->fb.var.nonstd		= 0;
 	fbi->fb.var.activate		= FB_ACTIVATE_NOW;
@@ -341,7 +328,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.var.width		= -1;
 
 	/* try allocating the framebuffer */
-	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
+	fb_mem_len = mode.xres * mode.yres * 2 * (bpp / 8);
 	fb_mem_virt = dmam_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
 				GFP_KERNEL);
 	if (!fb_mem_virt) {
@@ -349,8 +336,8 @@ static int wm8505fb_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	fbi->fb.var.xres_virtual	= of_mode.xres;
-	fbi->fb.var.yres_virtual	= of_mode.yres * 2;
+	fbi->fb.var.xres_virtual	= mode.xres;
+	fbi->fb.var.yres_virtual	= mode.yres * 2;
 	fbi->fb.var.bits_per_pixel	= bpp;
 
 	fbi->fb.fix.smem_start		= fb_mem_phys;
-- 
cgit v1.2.3-70-g09d2


From a1655100ddfa10829b7d3b055611f268a82e335a Mon Sep 17 00:00:00 2001
From: Heiko Stübner <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:13:02 +0100
Subject: AUO-K190x: Use correct line length
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Previously all functions that used the line length used xres directly,
thus hardcoding a 8bits per pixel value.

This patch calculates the correct line length according to the actual
bits per pixel value and changes all line length users to use the
calculated line length value.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k1900fb.c |  5 +++--
 drivers/video/auo_k1901fb.c |  5 +++--
 drivers/video/auo_k190x.c   | 15 ++++++++-------
 3 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/video/auo_k1900fb.c b/drivers/video/auo_k1900fb.c
index 1a9ac6e1f4b..d572d3e9c50 100644
--- a/drivers/video/auo_k1900fb.c
+++ b/drivers/video/auo_k1900fb.c
@@ -82,6 +82,7 @@ static void auok1900_update_region(struct auok190xfb_par *par, int mode,
 	struct device *dev = par->info->device;
 	unsigned char *buf = (unsigned char *)par->info->screen_base;
 	int xres = par->info->var.xres;
+	int line_length = par->info->fix.line_length;
 	u16 args[4];
 
 	pm_runtime_get_sync(dev);
@@ -100,9 +101,9 @@ static void auok1900_update_region(struct auok190xfb_par *par, int mode,
 	args[1] = y1 + 1;
 	args[2] = xres;
 	args[3] = y2 - y1;
-	buf += y1 * xres;
+	buf += y1 * line_length;
 	auok190x_send_cmdargs_pixels(par, AUOK1900_CMD_PARTIALDISP, 4, args,
-				     ((y2 - y1) * xres)/2, (u16 *) buf);
+				     ((y2 - y1) * line_length)/2, (u16 *) buf);
 	auok190x_send_command(par, AUOK190X_CMD_DATA_STOP);
 
 	par->update_cnt++;
diff --git a/drivers/video/auo_k1901fb.c b/drivers/video/auo_k1901fb.c
index d1db1653cd8..9efbe276344 100644
--- a/drivers/video/auo_k1901fb.c
+++ b/drivers/video/auo_k1901fb.c
@@ -121,6 +121,7 @@ static void auok1901_update_region(struct auok190xfb_par *par, int mode,
 	struct device *dev = par->info->device;
 	unsigned char *buf = (unsigned char *)par->info->screen_base;
 	int xres = par->info->var.xres;
+	int line_length = par->info->fix.line_length;
 	u16 args[5];
 
 	pm_runtime_get_sync(dev);
@@ -139,9 +140,9 @@ static void auok1901_update_region(struct auok190xfb_par *par, int mode,
 	args[1] = y1 + 1;
 	args[2] = xres;
 	args[3] = y2 - y1;
-	buf += y1 * xres;
+	buf += y1 * line_length;
 	auok190x_send_cmdargs_pixels_nowait(par, AUOK1901_CMD_DMA_START, 4,
-					    args, ((y2 - y1) * xres)/2,
+					    args, ((y2 - y1) * line_length)/2,
 					    (u16 *) buf);
 	auok190x_send_command_nowait(par, AUOK190X_CMD_DATA_STOP);
 
diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index 53846cb534d..bc0b6433eae 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -224,8 +224,8 @@ static void auok190xfb_dpy_deferred_io(struct fb_info *info,
 {
 	struct fb_deferred_io *fbdefio = info->fbdefio;
 	struct auok190xfb_par *par = info->par;
+	u16 line_length = info->fix.line_length;
 	u16 yres = info->var.yres;
-	u16 xres = info->var.xres;
 	u16 y1 = 0, h = 0;
 	int prev_index = -1;
 	struct page *cur;
@@ -254,7 +254,7 @@ static void auok190xfb_dpy_deferred_io(struct fb_info *info,
 	}
 
 	/* height increment is fixed per page */
-	h_inc = DIV_ROUND_UP(PAGE_SIZE , xres);
+	h_inc = DIV_ROUND_UP(PAGE_SIZE , line_length);
 
 	/* calculate number of pages from pixel height */
 	threshold = par->consecutive_threshold / h_inc;
@@ -265,7 +265,7 @@ static void auok190xfb_dpy_deferred_io(struct fb_info *info,
 	list_for_each_entry(cur, &fbdefio->pagelist, lru) {
 		if (prev_index < 0) {
 			/* just starting so assign first page */
-			y1 = (cur->index << PAGE_SHIFT) / xres;
+			y1 = (cur->index << PAGE_SHIFT) / line_length;
 			h = h_inc;
 		} else if ((cur->index - prev_index) <= threshold) {
 			/* page is within our threshold for single updates */
@@ -275,7 +275,7 @@ static void auok190xfb_dpy_deferred_io(struct fb_info *info,
 			par->update_partial(par, y1, y1 + h);
 
 			/* start over with our non consecutive page */
-			y1 = (cur->index << PAGE_SHIFT) / xres;
+			y1 = (cur->index << PAGE_SHIFT) / line_length;
 			h = h_inc;
 		}
 		prev_index = cur->index;
@@ -896,13 +896,13 @@ int auok190x_common_probe(struct platform_device *pdev,
 		info->var.yres = panel->w;
 		info->var.xres_virtual = panel->h;
 		info->var.yres_virtual = panel->w;
-		info->fix.line_length = panel->h;
+		info->fix.line_length = panel->h * info->var.bits_per_pixel / 8;
 	} else {
 		info->var.xres = panel->w;
 		info->var.yres = panel->h;
 		info->var.xres_virtual = panel->w;
 		info->var.yres_virtual = panel->h;
-		info->fix.line_length = panel->w;
+		info->fix.line_length = panel->w * info->var.bits_per_pixel / 8;
 	}
 
 	par->resolution = board->resolution;
@@ -910,7 +910,8 @@ int auok190x_common_probe(struct platform_device *pdev,
 
 	/* videomemory handling */
 
-	videomemorysize = roundup((panel->w * panel->h), PAGE_SIZE);
+	videomemorysize = roundup((panel->w * panel->h) *
+				info->var.bits_per_pixel / 8, PAGE_SIZE);
 	videomemory = vmalloc(videomemorysize);
 	if (!videomemory) {
 		ret = -ENOMEM;
-- 
cgit v1.2.3-70-g09d2


From 70f1e28e65dec704cd49bf7e21c2c372096cf5b3 Mon Sep 17 00:00:00 2001
From: Heiko Stübner <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:13:37 +0100
Subject: AUO-K190x: add runtime-pm calls to controller init functions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The controller init may be called from a context where the device
is runtime suspended, leading to a deadlock, as the controllers only
accepts the wakeup command when suspended.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k1900fb.c | 6 ++++++
 drivers/video/auo_k1901fb.c | 6 ++++++
 2 files changed, 12 insertions(+)

diff --git a/drivers/video/auo_k1900fb.c b/drivers/video/auo_k1900fb.c
index d572d3e9c50..f5b668e77af 100644
--- a/drivers/video/auo_k1900fb.c
+++ b/drivers/video/auo_k1900fb.c
@@ -60,9 +60,12 @@
 
 static void auok1900_init(struct auok190xfb_par *par)
 {
+	struct device *dev = par->info->device;
 	struct auok190x_board *board = par->board;
 	u16 init_param = 0;
 
+	pm_runtime_get_sync(dev);
+
 	init_param |= AUOK1900_INIT_TEMP_AVERAGE;
 	init_param |= AUOK1900_INIT_ROTATE(par->rotation);
 	init_param |= AUOK190X_INIT_INVERSE_WHITE;
@@ -74,6 +77,9 @@ static void auok1900_init(struct auok190xfb_par *par)
 
 	/* let the controller finish */
 	board->wait_for_rdy(par);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
 }
 
 static void auok1900_update_region(struct auok190xfb_par *par, int mode,
diff --git a/drivers/video/auo_k1901fb.c b/drivers/video/auo_k1901fb.c
index 9efbe276344..12b9adcb75c 100644
--- a/drivers/video/auo_k1901fb.c
+++ b/drivers/video/auo_k1901fb.c
@@ -101,9 +101,12 @@
 
 static void auok1901_init(struct auok190xfb_par *par)
 {
+	struct device *dev = par->info->device;
 	struct auok190x_board *board = par->board;
 	u16 init_param = 0;
 
+	pm_runtime_get_sync(dev);
+
 	init_param |= AUOK190X_INIT_INVERSE_WHITE;
 	init_param |= AUOK190X_INIT_FORMAT0;
 	init_param |= AUOK1901_INIT_RESOLUTION(par->resolution);
@@ -113,6 +116,9 @@ static void auok1901_init(struct auok190xfb_par *par)
 
 	/* let the controller finish */
 	board->wait_for_rdy(par);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
 }
 
 static void auok1901_update_region(struct auok190xfb_par *par, int mode,
-- 
cgit v1.2.3-70-g09d2


From 4e0ab85bb9097ecc422d4237f9eec155993f2902 Mon Sep 17 00:00:00 2001
From: Heiko Stübner <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:14:22 +0100
Subject: AUO-K190x: set the correct runtime-pm state in recover
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In the recover function the device gets powercycled and is after
this again active, independent of its previous state.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index bc0b6433eae..17f8d099b17 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -588,10 +588,16 @@ static int auok190x_power(struct auok190xfb_par *par, bool on)
 
 static void auok190x_recover(struct auok190xfb_par *par)
 {
+	struct device *dev = par->info->device;
+
 	auok190x_power(par, 0);
 	msleep(100);
 	auok190x_power(par, 1);
 
+	/* after powercycling the device, it's always active */
+	pm_runtime_set_active(dev);
+	par->standby = 0;
+
 	par->init(par);
 
 	/* wait for init to complete */
-- 
cgit v1.2.3-70-g09d2


From 03fc1499f0fb28d4f70b83e8a05652129936486c Mon Sep 17 00:00:00 2001
From: Heiko Stübner <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:14:52 +0100
Subject: AUO-K190x: make memory check in check_var more flexible
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Use only information from the new var to calculate the amount
of memory needed.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index 17f8d099b17..e078e20d4ad 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -376,6 +376,9 @@ static void auok190xfb_imageblit(struct fb_info *info,
 static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 				   struct fb_info *info)
 {
+	struct device *dev = info->device;
+	int size;
+
 	if (info->var.xres != var->xres || info->var.yres != var->yres ||
 	    info->var.xres_virtual != var->xres_virtual ||
 	    info->var.yres_virtual != var->yres_virtual) {
@@ -388,9 +391,10 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 	 *  Memory limit
 	 */
 
-	if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
-		pr_info("%s: Memory Limit requested yres_virtual = %u\n",
-			 __func__, var->yres_virtual);
+	size = var->xres_virtual * var->yres_virtual * var->bits_per_pixel / 8;
+	if (size > info->fix.smem_len) {
+		dev_err(dev, "Memory limit exceeded, requested %dK\n",
+			size >> 10);
 		return -ENOMEM;
 	}
 
-- 
cgit v1.2.3-70-g09d2


From 4ea80d35b4e0cdb23c42d2664fb745f0afe397d1 Mon Sep 17 00:00:00 2001
From: Heiko Stübner <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:15:27 +0100
Subject: AUO-K190x: move var resolution-handling into check_var
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Provides a central place for this, which will be helpful for
the following changes.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 43 ++++++++++++++++++++++---------------------
 1 file changed, 22 insertions(+), 21 deletions(-)

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index e078e20d4ad..a77513b0e18 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -377,16 +377,25 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 				   struct fb_info *info)
 {
 	struct device *dev = info->device;
+	struct auok190xfb_par *par = info->par;
+	struct panel_info *panel = &panel_table[par->resolution];
 	int size;
 
-	if (info->var.xres != var->xres || info->var.yres != var->yres ||
-	    info->var.xres_virtual != var->xres_virtual ||
-	    info->var.yres_virtual != var->yres_virtual) {
-		pr_info("%s: Resolution not supported: X%u x Y%u\n",
-			 __func__, var->xres, var->yres);
-		return -EINVAL;
+	/*
+	 * Dimensions
+	 */
+
+	if (par->rotation & 1) {
+		var->xres = panel->h;
+		var->yres = panel->w;
+	} else {
+		var->xres = panel->w;
+		var->yres = panel->h;
 	}
 
+	var->xres_virtual = var->xres;
+	var->yres_virtual = var->yres;
+
 	/*
 	 *  Memory limit
 	 */
@@ -900,21 +909,6 @@ int auok190x_common_probe(struct platform_device *pdev,
 
 	panel = &panel_table[board->resolution];
 
-	/* if 90 degree rotation, switch width and height */
-	if (board->rotation & 1) {
-		info->var.xres = panel->h;
-		info->var.yres = panel->w;
-		info->var.xres_virtual = panel->h;
-		info->var.yres_virtual = panel->w;
-		info->fix.line_length = panel->h * info->var.bits_per_pixel / 8;
-	} else {
-		info->var.xres = panel->w;
-		info->var.yres = panel->h;
-		info->var.xres_virtual = panel->w;
-		info->var.yres_virtual = panel->h;
-		info->fix.line_length = panel->w * info->var.bits_per_pixel / 8;
-	}
-
 	par->resolution = board->resolution;
 	par->rotation = board->rotation;
 
@@ -935,6 +929,13 @@ int auok190x_common_probe(struct platform_device *pdev,
 	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
 	info->fbops = &auok190xfb_ops;
 
+	ret = auok190xfb_check_var(&info->var, info);
+	if (ret)
+		goto err_defio;
+
+	info->fix.line_length = info->var.xres_virtual *
+				info->var.bits_per_pixel / 8;
+
 	/* deferred io init */
 
 	info->fbdefio = devm_kzalloc(info->device,
-- 
cgit v1.2.3-70-g09d2


From 76de404b452305409182748568444994df765d9d Mon Sep 17 00:00:00 2001
From: Heiko Stübner <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:15:55 +0100
Subject: AUO-K190x: make color handling more flexible
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Don't hardcode the 8bit mode in all parts. This creates the possibility
to add another colormode easily later on.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 79 ++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 65 insertions(+), 14 deletions(-)

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index a77513b0e18..f7f00e34323 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -60,8 +60,8 @@ static void auok190x_issue_cmd(struct auok190xfb_par *par, u16 data)
 	par->board->set_ctl(par, AUOK190X_I80_DC, 1);
 }
 
-static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
-				 u16 *data)
+static int auok190x_issue_pixels_gray8(struct auok190xfb_par *par, int size,
+				       u16 *data)
 {
 	struct device *dev = par->info->device;
 	int i;
@@ -91,6 +91,21 @@ static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
 	return 0;
 }
 
+static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
+				 u16 *data)
+{
+	struct fb_info *info = par->info;
+	struct device *dev = par->info->device;
+
+	if (info->var.bits_per_pixel == 8 && info->var.grayscale)
+		auok190x_issue_pixels_gray8(par, size, data);
+	else
+		dev_err(dev, "unsupported color mode (bits: %d, gray: %d)\n",
+			info->var.bits_per_pixel, info->var.grayscale);
+
+	return 0;
+}
+
 static u16 auok190x_read_data(struct auok190xfb_par *par)
 {
 	u16 data;
@@ -381,6 +396,35 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 	struct panel_info *panel = &panel_table[par->resolution];
 	int size;
 
+	/*
+	 * Color depth
+	 */
+
+	if (var->bits_per_pixel == 8 && var->grayscale == 1) {
+		/*
+		 * For 8-bit grayscale, R, G, and B offset are equal.
+		 */
+		var->red.length = 8;
+		var->red.offset = 0;
+		var->red.msb_right = 0;
+
+		var->green.length = 8;
+		var->green.offset = 0;
+		var->green.msb_right = 0;
+
+		var->blue.length = 8;
+		var->blue.offset = 0;
+		var->blue.msb_right = 0;
+
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		var->transp.msb_right = 0;
+	} else {
+		dev_warn(dev, "unsupported color mode (bits: %d, grayscale: %d)\n",
+			info->var.bits_per_pixel, info->var.grayscale);
+		return -EINVAL;
+	}
+
 	/*
 	 * Dimensions
 	 */
@@ -410,6 +454,24 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 	return 0;
 }
 
+static int auok190xfb_set_fix(struct fb_info *info)
+{
+	struct fb_fix_screeninfo *fix = &info->fix;
+	struct fb_var_screeninfo *var = &info->var;
+
+	fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+	fix->type = FB_TYPE_PACKED_PIXELS;
+	fix->accel = FB_ACCEL_NONE;
+	fix->visual = (var->grayscale) ? FB_VISUAL_STATIC_PSEUDOCOLOR
+				       : FB_VISUAL_TRUECOLOR;
+	fix->xpanstep = 0;
+	fix->ypanstep = 0;
+	fix->ywrapstep = 0;
+
+	return 0;
+}
+
 static struct fb_ops auok190xfb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_read	= fb_sys_read,
@@ -894,18 +956,8 @@ int auok190x_common_probe(struct platform_device *pdev,
 	/* initialise fix, var, resolution and rotation */
 
 	strlcpy(info->fix.id, init->id, 16);
-	info->fix.type = FB_TYPE_PACKED_PIXELS;
-	info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
-	info->fix.xpanstep = 0;
-	info->fix.ypanstep = 0;
-	info->fix.ywrapstep = 0;
-	info->fix.accel = FB_ACCEL_NONE;
-
 	info->var.bits_per_pixel = 8;
 	info->var.grayscale = 1;
-	info->var.red.length = 8;
-	info->var.green.length = 8;
-	info->var.blue.length = 8;
 
 	panel = &panel_table[board->resolution];
 
@@ -933,8 +985,7 @@ int auok190x_common_probe(struct platform_device *pdev,
 	if (ret)
 		goto err_defio;
 
-	info->fix.line_length = info->var.xres_virtual *
-				info->var.bits_per_pixel / 8;
+	auok190xfb_set_fix(info);
 
 	/* deferred io init */
 
-- 
cgit v1.2.3-70-g09d2


From 46574c72c701e45da1e0a2e944df885fcd2db668 Mon Sep 17 00:00:00 2001
From: Heiko Stübner <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:16:29 +0100
Subject: AUO-K190x: add a 16bit truecolor mode
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Some applications seem to have problems using the 8bit grayscale mode.
Therefore provide a 16bit truecolor mode which also gets converted to
the 4bit grayscale the display uses, when updating a region.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 71 +++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 69 insertions(+), 2 deletions(-)

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index f7f00e34323..c2a945183a5 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -60,6 +60,46 @@ static void auok190x_issue_cmd(struct auok190xfb_par *par, u16 data)
 	par->board->set_ctl(par, AUOK190X_I80_DC, 1);
 }
 
+/**
+ * Conversion of 16bit color to 4bit grayscale
+ * does roughly (0.3 * R + 0.6 G + 0.1 B) / 2
+ */
+static inline int rgb565_to_gray4(u16 data, struct fb_var_screeninfo *var)
+{
+	return ((((data & 0xF800) >> var->red.offset) * 77 +
+		 ((data & 0x07E0) >> (var->green.offset + 1)) * 151 +
+		 ((data & 0x1F) >> var->blue.offset) * 28) >> 8 >> 1);
+}
+
+static int auok190x_issue_pixels_rgb565(struct auok190xfb_par *par, int size,
+					u16 *data)
+{
+	struct fb_var_screeninfo *var = &par->info->var;
+	struct device *dev = par->info->device;
+	int i;
+	u16 tmp;
+
+	if (size & 7) {
+		dev_err(dev, "issue_pixels: size %d must be a multiple of 8\n",
+			size);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < (size >> 2); i++) {
+		par->board->set_ctl(par, AUOK190X_I80_WR, 0);
+
+		tmp  = (rgb565_to_gray4(data[4*i], var) & 0x000F);
+		tmp |= (rgb565_to_gray4(data[4*i+1], var) << 4) & 0x00F0;
+		tmp |= (rgb565_to_gray4(data[4*i+2], var) << 8) & 0x0F00;
+		tmp |= (rgb565_to_gray4(data[4*i+3], var) << 12) & 0xF000;
+
+		par->board->set_hdb(par, tmp);
+		par->board->set_ctl(par, AUOK190X_I80_WR, 1);
+	}
+
+	return 0;
+}
+
 static int auok190x_issue_pixels_gray8(struct auok190xfb_par *par, int size,
 				       u16 *data)
 {
@@ -99,6 +139,8 @@ static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
 
 	if (info->var.bits_per_pixel == 8 && info->var.grayscale)
 		auok190x_issue_pixels_gray8(par, size, data);
+	else if (info->var.bits_per_pixel == 16)
+		auok190x_issue_pixels_rgb565(par, size, data);
 	else
 		dev_err(dev, "unsupported color mode (bits: %d, gray: %d)\n",
 			info->var.bits_per_pixel, info->var.grayscale);
@@ -416,6 +458,22 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 		var->blue.offset = 0;
 		var->blue.msb_right = 0;
 
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		var->transp.msb_right = 0;
+	} else if (var->bits_per_pixel == 16) {
+		var->red.length = 5;
+		var->red.offset = 11;
+		var->red.msb_right = 0;
+
+		var->green.length = 6;
+		var->green.offset = 5;
+		var->green.msb_right = 0;
+
+		var->blue.length = 5;
+		var->blue.offset = 0;
+		var->blue.msb_right = 0;
+
 		var->transp.length = 0;
 		var->transp.offset = 0;
 		var->transp.msb_right = 0;
@@ -472,6 +530,15 @@ static int auok190xfb_set_fix(struct fb_info *info)
 	return 0;
 }
 
+static int auok190xfb_set_par(struct fb_info *info)
+{
+	struct auok190xfb_par *par = info->par;
+
+	auok190xfb_set_fix(info);
+
+	return 0;
+}
+
 static struct fb_ops auok190xfb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_read	= fb_sys_read,
@@ -480,6 +547,7 @@ static struct fb_ops auok190xfb_ops = {
 	.fb_copyarea	= auok190xfb_copyarea,
 	.fb_imageblit	= auok190xfb_imageblit,
 	.fb_check_var	= auok190xfb_check_var,
+	.fb_set_par     = auok190xfb_set_par,
 };
 
 /*
@@ -966,8 +1034,7 @@ int auok190x_common_probe(struct platform_device *pdev,
 
 	/* videomemory handling */
 
-	videomemorysize = roundup((panel->w * panel->h) *
-				info->var.bits_per_pixel / 8, PAGE_SIZE);
+	videomemorysize = roundup((panel->w * panel->h) * 2, PAGE_SIZE);
 	videomemory = vmalloc(videomemorysize);
 	if (!videomemory) {
 		ret = -ENOMEM;
-- 
cgit v1.2.3-70-g09d2


From fd3871aa5c0d108b89858263254b49d9bca2dc53 Mon Sep 17 00:00:00 2001
From: Heiko Stübner <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:17:00 +0100
Subject: AUO-K190x: add framebuffer rotation support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Change the driver to use the framebuffer rotation functions to be
able to change the rotation at runtime.

This also removes the setting of the rotation via the platform data.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c   | 25 ++++++++++++++++++++-----
 include/video/auo_k190xfb.h |  1 -
 2 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index c2a945183a5..baf213cdbe3 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -487,12 +487,20 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 	 * Dimensions
 	 */
 
-	if (par->rotation & 1) {
-		var->xres = panel->h;
-		var->yres = panel->w;
-	} else {
+	switch (var->rotate) {
+	case FB_ROTATE_UR:
+	case FB_ROTATE_UD:
 		var->xres = panel->w;
 		var->yres = panel->h;
+		break;
+	case FB_ROTATE_CW:
+	case FB_ROTATE_CCW:
+		var->xres = panel->h;
+		var->yres = panel->w;
+		break;
+	default:
+		dev_dbg(dev, "Invalid rotation request\n");
+		return -EINVAL;
 	}
 
 	var->xres_virtual = var->xres;
@@ -534,8 +542,15 @@ static int auok190xfb_set_par(struct fb_info *info)
 {
 	struct auok190xfb_par *par = info->par;
 
+	par->rotation = info->var.rotate;
 	auok190xfb_set_fix(info);
 
+	/* reinit the controller to honor the rotation */
+	par->init(par);
+
+	/* wait for init to complete */
+	par->board->wait_for_rdy(par);
+
 	return 0;
 }
 
@@ -1030,7 +1045,7 @@ int auok190x_common_probe(struct platform_device *pdev,
 	panel = &panel_table[board->resolution];
 
 	par->resolution = board->resolution;
-	par->rotation = board->rotation;
+	par->rotation = 0;
 
 	/* videomemory handling */
 
diff --git a/include/video/auo_k190xfb.h b/include/video/auo_k190xfb.h
index 609efe8c686..ad7bc51bee9 100644
--- a/include/video/auo_k190xfb.h
+++ b/include/video/auo_k190xfb.h
@@ -98,7 +98,6 @@ struct auok190x_board {
 	int gpio_nbusy;
 
 	int resolution;
-	int rotation;
 	int quirks;
 	int fps;
 };
-- 
cgit v1.2.3-70-g09d2


From b61f232ff09b6cff22d5186001027438c620da39 Mon Sep 17 00:00:00 2001
From: Heiko Stübner <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:17:32 +0100
Subject: AUO-K190x: Add resolutions for portrait displays
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The controller also contains support for displays in a portrait
orientation and it seems devices which such displays really reached
the market - Pandigital Novell seems to be one example.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c   | 8 ++++++++
 include/video/auo_k190xfb.h | 2 ++
 2 files changed, 10 insertions(+)

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index baf213cdbe3..b1f19b266da 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -40,6 +40,14 @@ static struct panel_info panel_table[] = {
 		.w = 1024,
 		.h = 768,
 	},
+	[AUOK190X_RESOLUTION_600_800] = {
+		.w = 600,
+		.h = 800,
+	},
+	[AUOK190X_RESOLUTION_768_1024] = {
+		.w = 768,
+		.h = 1024,
+	},
 };
 
 /*
diff --git a/include/video/auo_k190xfb.h b/include/video/auo_k190xfb.h
index ad7bc51bee9..ac329ee1d75 100644
--- a/include/video/auo_k190xfb.h
+++ b/include/video/auo_k190xfb.h
@@ -22,6 +22,8 @@
  */
 #define AUOK190X_RESOLUTION_800_600		0
 #define AUOK190X_RESOLUTION_1024_768		1
+#define AUOK190X_RESOLUTION_600_800		4
+#define AUOK190X_RESOLUTION_768_1024		5
 
 /*
  * struct used by auok190x. board specific stuff comes from *board
-- 
cgit v1.2.3-70-g09d2


From 8e524c95040aa521283aba126c047381eadaed39 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Mon, 8 Apr 2013 13:04:00 +0300
Subject: video: wm8505fb: Convert to devm_ioremap_resource()

Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/wm8505fb.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 19e2e7ff492..01f9ace068e 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -18,6 +18,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/fb.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -303,9 +304,9 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.pseudo_palette	= addr;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	fbi->regbase = devm_request_and_ioremap(&pdev->dev, res);
-	if (fbi->regbase == NULL)
-		return -EBUSY;
+	fbi->regbase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(fbi->regbase))
+		return PTR_ERR(fbi->regbase);
 
 	disp_timing = of_get_display_timings(pdev->dev.of_node);
 	if (!disp_timing)
-- 
cgit v1.2.3-70-g09d2


From cd19965a5e80abfa1a83a1fdc35f38c93972e209 Mon Sep 17 00:00:00 2001
From: Paul Bolle <pebolle@tiscali.nl>
Date: Tue, 19 Mar 2013 11:07:57 +0100
Subject: ARM: OMAP: remove "config FB_OMAP_CONSISTENT_DMA_SIZE"

The only user of Kconfig symbol FB_OMAP_CONSISTENT_DMA_SIZE got removed
in v3.8, with commit 6ba54ab4a49bbad736b0254aa6bdf0cb83013815 ("ARM:
OMAP: Remove omap_init_consistent_dma_size()"). Remove this symbol too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap/Kconfig | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index e512581300f..0bc3a936ce2 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -39,17 +39,6 @@ config FB_OMAP_LCD_MIPID
 	  the Mobile Industry Processor Interface DBI-C/DCS
 	  specification. (Supported LCDs: Philips LPH8923, Sharp LS041Y3)
 
-config FB_OMAP_CONSISTENT_DMA_SIZE
-	int "Consistent DMA memory size (MB)"
-	depends on FB_OMAP
-	range 1 14
-	default 2
-	help
-	  Increase the DMA consistent memory size according to your video
-	  memory needs, for example if you want to use multiple planes.
-	  The size must be 2MB aligned.
-	  If unsure say 1.
-
 config FB_OMAP_DMA_TUNE
         bool "Set DMA SDRAM access priority high"
         depends on FB_OMAP
-- 
cgit v1.2.3-70-g09d2


From 3ccbf89f4d86cc8f4d6645fa5db0327ef835777b Mon Sep 17 00:00:00 2001
From: Fabio Porcedda <fabio.porcedda@gmail.com>
Date: Fri, 15 Mar 2013 14:02:38 +0100
Subject: drivers: video: use module_platform_driver_probe()

This patch converts the drivers to use the
module_platform_driver_probe() macro which makes the code smaller and
a bit simpler.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> # atmel_lcdfb.c
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # amifb.c
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/amifb.c          | 14 +-------------
 drivers/video/atmel_lcdfb.c    | 13 +------------
 drivers/video/omap2/vrfb.c     | 13 +------------
 drivers/video/sh_mipi_dsi.c    | 12 +-----------
 drivers/video/sh_mobile_hdmi.c | 12 +-----------
 5 files changed, 5 insertions(+), 59 deletions(-)

diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index 7fa1bf82372..77cb4ffa1fe 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -3788,19 +3788,7 @@ static struct platform_driver amifb_driver = {
 	},
 };
 
-static int __init amifb_init(void)
-{
-	return platform_driver_probe(&amifb_driver, amifb_probe);
-}
-
-module_init(amifb_init);
-
-static void __exit amifb_exit(void)
-{
-	platform_driver_unregister(&amifb_driver);
-}
-
-module_exit(amifb_exit);
+module_platform_driver_probe(amifb_driver, amifb_probe);
 
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:amiga-video");
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 025428e04c3..98348ec0b3c 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -1158,18 +1158,7 @@ static struct platform_driver atmel_lcdfb_driver = {
 	},
 };
 
-static int __init atmel_lcdfb_init(void)
-{
-	return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
-}
-
-static void __exit atmel_lcdfb_exit(void)
-{
-	platform_driver_unregister(&atmel_lcdfb_driver);
-}
-
-module_init(atmel_lcdfb_init);
-module_exit(atmel_lcdfb_exit);
+module_platform_driver_probe(atmel_lcdfb_driver, atmel_lcdfb_probe);
 
 MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
 MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index 10560efeb35..5261229c79a 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -397,18 +397,7 @@ static struct platform_driver vrfb_driver = {
 	.remove		= __exit_p(vrfb_remove),
 };
 
-static int __init vrfb_init(void)
-{
-	return platform_driver_probe(&vrfb_driver, &vrfb_probe);
-}
-
-static void __exit vrfb_exit(void)
-{
-	platform_driver_unregister(&vrfb_driver);
-}
-
-module_init(vrfb_init);
-module_exit(vrfb_exit);
+module_platform_driver_probe(vrfb_driver, vrfb_probe);
 
 MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
 MODULE_DESCRIPTION("OMAP VRFB");
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index 701b461cf8a..6cad53075e9 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -581,17 +581,7 @@ static struct platform_driver sh_mipi_driver = {
 	},
 };
 
-static int __init sh_mipi_init(void)
-{
-	return platform_driver_probe(&sh_mipi_driver, sh_mipi_probe);
-}
-module_init(sh_mipi_init);
-
-static void __exit sh_mipi_exit(void)
-{
-	platform_driver_unregister(&sh_mipi_driver);
-}
-module_exit(sh_mipi_exit);
+module_platform_driver_probe(sh_mipi_driver, sh_mipi_probe);
 
 MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
 MODULE_DESCRIPTION("SuperH / ARM-shmobile MIPI DSI driver");
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 930e550e752..bfe4728480f 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -1445,17 +1445,7 @@ static struct platform_driver sh_hdmi_driver = {
 	},
 };
 
-static int __init sh_hdmi_init(void)
-{
-	return platform_driver_probe(&sh_hdmi_driver, sh_hdmi_probe);
-}
-module_init(sh_hdmi_init);
-
-static void __exit sh_hdmi_exit(void)
-{
-	platform_driver_unregister(&sh_hdmi_driver);
-}
-module_exit(sh_hdmi_exit);
+module_platform_driver_probe(sh_hdmi_driver, sh_hdmi_probe);
 
 MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
 MODULE_DESCRIPTION("SuperH / ARM-shmobile HDMI driver");
-- 
cgit v1.2.3-70-g09d2


From 38dd2daf297a4543344b6c473f3e80b362430a4b Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@tabi.org>
Date: Sat, 30 Mar 2013 02:36:00 +0200
Subject: drivers/video: fsl-diu-fb: add hardware cursor support

The Freescale DIU supports a 32x32 color hardware cursor.  Framebuffer
cursors are monochrome, so the driver converts the image data to the
format that the DIU expects and then programs to hardware accordingly.

The support cursor enabling/disabling, we provide two cursor image buffers.
One is always blank (all zeroes), and the other contains the real cursor
image data.  To disable the cursor (used typically for cursor blinking),
we just tell the hardware to use the blank cursor data.

Signed-off-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/fsl-diu-fb.c | 157 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 155 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 41fbd9453c5..6c278056fc6 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -375,7 +375,10 @@ struct fsl_diu_data {
 	struct diu_ad dummy_ad __aligned(8);
 	struct diu_ad ad[NUM_AOIS] __aligned(8);
 	u8 gamma[256 * 3] __aligned(32);
-	u8 cursor[MAX_CURS * MAX_CURS * 2] __aligned(32);
+	/* It's easier to parse the cursor data as little-endian */
+	__le16 cursor[MAX_CURS * MAX_CURS] __aligned(32);
+	/* Blank cursor data -- used to hide the cursor */
+	__le16 blank_cursor[MAX_CURS * MAX_CURS] __aligned(32);
 	uint8_t edid_data[EDID_LENGTH];
 	bool has_edid;
 } __aligned(32);
@@ -824,7 +827,6 @@ static void update_lcdc(struct fb_info *info)
 	/* Program DIU registers */
 
 	out_be32(&hw->gamma, DMA_ADDR(data, gamma));
-	out_be32(&hw->cursor, DMA_ADDR(data, cursor));
 
 	out_be32(&hw->bgnd, 0x007F7F7F); /* Set background to grey */
 	out_be32(&hw->disp_size, (var->yres << 16) | var->xres);
@@ -967,6 +969,156 @@ static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel)
 	}
 }
 
+/*
+ * Copies a cursor image from user space to the proper place in driver
+ * memory so that the hardware can display the cursor image.
+ *
+ * Cursor data is represented as a sequence of 'width' bits packed into bytes.
+ * That is, the first 8 bits are in the first byte, the second 8 bits in the
+ * second byte, and so on.  Therefore, the each row of the cursor is (width +
+ * 7) / 8 bytes of 'data'
+ *
+ * The DIU only supports cursors up to 32x32 (MAX_CURS).  We reject cursors
+ * larger than this, so we already know that 'width' <= 32.  Therefore, we can
+ * simplify our code by using a 32-bit big-endian integer ("line") to read in
+ * a single line of pixels, and only look at the top 'width' bits of that
+ * integer.
+ *
+ * This could result in an unaligned 32-bit read.  For example, if the cursor
+ * is 24x24, then the first three bytes of 'image' contain the pixel data for
+ * the top line of the cursor.  We do a 32-bit read of 'image', but we look
+ * only at the top 24 bits.  Then we increment 'image' by 3 bytes.  The next
+ * read is unaligned.  The only problem is that we might read past the end of
+ * 'image' by 1-3 bytes, but that should not cause any problems.
+ */
+static void fsl_diu_load_cursor_image(struct fb_info *info,
+	const void *image, uint16_t bg, uint16_t fg,
+	unsigned int width, unsigned int height)
+{
+	struct mfb_info *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	__le16 *cursor = data->cursor;
+	__le16 _fg = cpu_to_le16(fg);
+	__le16 _bg = cpu_to_le16(bg);
+	unsigned int h, w;
+
+	for (h = 0; h < height; h++) {
+		uint32_t mask = 1 << 31;
+		uint32_t line = be32_to_cpup(image);
+
+		for (w = 0; w < width; w++) {
+			cursor[w] = (line & mask) ? _fg : _bg;
+			mask >>= 1;
+		}
+
+		cursor += MAX_CURS;
+		image += DIV_ROUND_UP(width, 8);
+	}
+}
+
+/*
+ * Set a hardware cursor.  The image data for the cursor is passed via the
+ * fb_cursor object.
+ */
+static int fsl_diu_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct mfb_info *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	struct diu __iomem *hw = data->diu_reg;
+
+	if (cursor->image.width > MAX_CURS || cursor->image.height > MAX_CURS)
+		return -EINVAL;
+
+	/* The cursor size has changed */
+	if (cursor->set & FB_CUR_SETSIZE) {
+		/*
+		 * The DIU cursor is a fixed size, so when we get this
+		 * message, instead of resizing the cursor, we just clear
+		 * all the image data, in expectation of new data.  However,
+		 * in tests this control does not appear to be normally
+		 * called.
+		 */
+		memset(data->cursor, 0, sizeof(data->cursor));
+	}
+
+	/* The cursor position has changed (cursor->image.dx|dy) */
+	if (cursor->set & FB_CUR_SETPOS) {
+		uint32_t xx, yy;
+
+		yy = (cursor->image.dy - info->var.yoffset) & 0x7ff;
+		xx = (cursor->image.dx - info->var.xoffset) & 0x7ff;
+
+		out_be32(&hw->curs_pos, yy << 16 | xx);
+	}
+
+	/*
+	 * FB_CUR_SETIMAGE - the cursor image has changed
+	 * FB_CUR_SETCMAP  - the cursor colors has changed
+	 * FB_CUR_SETSHAPE - the cursor bitmask has changed
+	 */
+	if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETCMAP | FB_CUR_SETIMAGE)) {
+		unsigned int image_size =
+			DIV_ROUND_UP(cursor->image.width, 8) * cursor->image.height;
+		unsigned int image_words =
+			DIV_ROUND_UP(image_size, sizeof(uint32_t));
+		unsigned int bg_idx = cursor->image.bg_color;
+		unsigned int fg_idx = cursor->image.fg_color;
+		uint8_t buffer[image_size];
+		uint32_t *image, *source, *mask;
+		uint16_t fg, bg;
+		unsigned int i;
+
+		if (info->state != FBINFO_STATE_RUNNING)
+			return 0;
+
+		/*
+		 * Determine the size of the cursor image data.  Normally,
+		 * it's 8x16.
+		 */
+		image_size = DIV_ROUND_UP(cursor->image.width, 8) *
+			cursor->image.height;
+
+		bg = ((info->cmap.red[bg_idx] & 0xf8) << 7) |
+		     ((info->cmap.green[bg_idx] & 0xf8) << 2) |
+		     ((info->cmap.blue[bg_idx] & 0xf8) >> 3) |
+		     1 << 15;
+
+		fg = ((info->cmap.red[fg_idx] & 0xf8) << 7) |
+		     ((info->cmap.green[fg_idx] & 0xf8) << 2) |
+		     ((info->cmap.blue[fg_idx] & 0xf8) >> 3) |
+		     1 << 15;
+
+		/* Use 32-bit operations on the data to improve performance */
+		image = (uint32_t *)buffer;
+		source = (uint32_t *)cursor->image.data;
+		mask = (uint32_t *)cursor->mask;
+
+		if (cursor->rop == ROP_XOR)
+			for (i = 0; i < image_words; i++)
+				image[i] = source[i] ^ mask[i];
+		else
+			for (i = 0; i < image_words; i++)
+				image[i] = source[i] & mask[i];
+
+		fsl_diu_load_cursor_image(info, image, bg, fg,
+			cursor->image.width, cursor->image.height);
+	};
+
+	/*
+	 * Show or hide the cursor.  The cursor data is always stored in the
+	 * 'cursor' memory block, and the actual cursor position is always in
+	 * the DIU's CURS_POS register.  To hide the cursor, we redirect the
+	 * CURSOR register to a blank cursor.  The show the cursor, we
+	 * redirect the CURSOR register to the real cursor data.
+	 */
+	if (cursor->enable)
+		out_be32(&hw->cursor, DMA_ADDR(data, cursor));
+	else
+		out_be32(&hw->cursor, DMA_ADDR(data, blank_cursor));
+
+	return 0;
+}
+
 /*
  * Using the fb_var_screeninfo in fb_info we set the resolution of this
  * particular framebuffer. This function alters the fb_fix_screeninfo stored
@@ -1312,6 +1464,7 @@ static struct fb_ops fsl_diu_ops = {
 	.fb_ioctl = fsl_diu_ioctl,
 	.fb_open = fsl_diu_open,
 	.fb_release = fsl_diu_release,
+	.fb_cursor = fsl_diu_cursor,
 };
 
 static int install_fb(struct fb_info *info)
-- 
cgit v1.2.3-70-g09d2


From 015623819b44a3b25347c9de3efd9ad01d475259 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 11 Apr 2013 02:04:54 +0200
Subject: video/exynos: remove unnecessary header inclusions

In multiplatform configurations, we cannot include headers
provided by only the exynos platform. Fortunately a number
of drivers that include those headers do not actually need
them, so we can just remove the inclusions.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-fbdev@vger.kernel.org
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/exynos/exynos_mipi_dsi.c          | 2 --
 drivers/video/exynos/exynos_mipi_dsi_common.c   | 2 --
 drivers/video/exynos/exynos_mipi_dsi_lowlevel.c | 2 --
 3 files changed, 6 deletions(-)

diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/exynos/exynos_mipi_dsi.c
index fac7df6d1ab..3dd43ca2b95 100644
--- a/drivers/video/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/exynos/exynos_mipi_dsi.c
@@ -35,8 +35,6 @@
 
 #include <video/exynos_mipi_dsim.h>
 
-#include <plat/fb.h>
-
 #include "exynos_mipi_dsi_common.h"
 #include "exynos_mipi_dsi_lowlevel.h"
 
diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.c b/drivers/video/exynos/exynos_mipi_dsi_common.c
index c70cb8926df..520fc9bd887 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_common.c
+++ b/drivers/video/exynos/exynos_mipi_dsi_common.c
@@ -31,8 +31,6 @@
 #include <video/mipi_display.h>
 #include <video/exynos_mipi_dsim.h>
 
-#include <mach/map.h>
-
 #include "exynos_mipi_dsi_regs.h"
 #include "exynos_mipi_dsi_lowlevel.h"
 #include "exynos_mipi_dsi_common.h"
diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c b/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
index 95cb99a1fe2..15c5abd408d 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
+++ b/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
@@ -26,8 +26,6 @@
 
 #include <video/exynos_mipi_dsim.h>
 
-#include <mach/map.h>
-
 #include "exynos_mipi_dsi_regs.h"
 
 void exynos_mipi_dsi_func_reset(struct mipi_dsim_device *dsim)
-- 
cgit v1.2.3-70-g09d2


From bbfce37b3ea11d13a984063a162c898a5fb23b1e Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 11 Apr 2013 02:04:55 +0200
Subject: video/s3c: move platform_data out of arch/arm

The s3c-fb driver requires header files from the samsung platforms
to find its platform_data definition, but this no longer works on
multiplatform kernels, so let's move the data into a new header
file under include/linux/platform_data.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-fbdev@vger.kernel.org
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/plat-samsung/include/plat/fb.h | 50 +-----------------------------
 drivers/video/s3c-fb.c                  |  3 +-
 include/linux/platform_data/video_s3c.h | 54 +++++++++++++++++++++++++++++++++
 3 files changed, 56 insertions(+), 51 deletions(-)
 create mode 100644 include/linux/platform_data/video_s3c.h

diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index b885322717a..9ae50727078 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -15,55 +15,7 @@
 #ifndef __PLAT_S3C_FB_H
 #define __PLAT_S3C_FB_H __FILE__
 
-/* S3C_FB_MAX_WIN
- * Set to the maximum number of windows that any of the supported hardware
- * can use. Since the platform data uses this for an array size, having it
- * set to the maximum of any version of the hardware can do is safe.
- */
-#define S3C_FB_MAX_WIN	(5)
-
-/**
- * struct s3c_fb_pd_win - per window setup data
- * @xres     : The window X size.
- * @yres     : The window Y size.
- * @virtual_x: The virtual X size.
- * @virtual_y: The virtual Y size.
- */
-struct s3c_fb_pd_win {
-	unsigned short		default_bpp;
-	unsigned short		max_bpp;
-	unsigned short		xres;
-	unsigned short		yres;
-	unsigned short		virtual_x;
-	unsigned short		virtual_y;
-};
-
-/**
- * struct s3c_fb_platdata -  S3C driver platform specific information
- * @setup_gpio: Setup the external GPIO pins to the right state to transfer
- *		the data from the display system to the connected display
- *		device.
- * @vidcon0: The base vidcon0 values to control the panel data format.
- * @vidcon1: The base vidcon1 values to control the panel data output.
- * @vtiming: Video timing when connected to a RGB type panel.
- * @win: The setup data for each hardware window, or NULL for unused.
- * @display_mode: The LCD output display mode.
- *
- * The platform data supplies the video driver with all the information
- * it requires to work with the display(s) attached to the machine. It
- * controls the initial mode, the number of display windows (0 is always
- * the base framebuffer) that are initialised etc.
- *
- */
-struct s3c_fb_platdata {
-	void	(*setup_gpio)(void);
-
-	struct s3c_fb_pd_win	*win[S3C_FB_MAX_WIN];
-	struct fb_videomode     *vtiming;
-
-	u32			 vidcon0;
-	u32			 vidcon1;
-};
+#include <linux/platform_data/video_s3c.h>
 
 /**
  * s3c_fb_set_platdata() - Setup the FB device with platform data.
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 968a62571df..2e7991c7ca0 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -24,10 +24,9 @@
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/pm_runtime.h>
+#include <linux/platform_data/video_s3c.h>
 
 #include <video/samsung_fimd.h>
-#include <mach/map.h>
-#include <plat/fb.h>
 
 /* This driver will export a number of framebuffer interfaces depending
  * on the configuration passed in via the platform data. Each fb instance
diff --git a/include/linux/platform_data/video_s3c.h b/include/linux/platform_data/video_s3c.h
new file mode 100644
index 00000000000..48883995f47
--- /dev/null
+++ b/include/linux/platform_data/video_s3c.h
@@ -0,0 +1,54 @@
+#ifndef __PLATFORM_DATA_VIDEO_S3C
+#define __PLATFORM_DATA_VIDEO_S3C
+
+/* S3C_FB_MAX_WIN
+ * Set to the maximum number of windows that any of the supported hardware
+ * can use. Since the platform data uses this for an array size, having it
+ * set to the maximum of any version of the hardware can do is safe.
+ */
+#define S3C_FB_MAX_WIN	(5)
+
+/**
+ * struct s3c_fb_pd_win - per window setup data
+ * @xres     : The window X size.
+ * @yres     : The window Y size.
+ * @virtual_x: The virtual X size.
+ * @virtual_y: The virtual Y size.
+ */
+struct s3c_fb_pd_win {
+	unsigned short		default_bpp;
+	unsigned short		max_bpp;
+	unsigned short		xres;
+	unsigned short		yres;
+	unsigned short		virtual_x;
+	unsigned short		virtual_y;
+};
+
+/**
+ * struct s3c_fb_platdata -  S3C driver platform specific information
+ * @setup_gpio: Setup the external GPIO pins to the right state to transfer
+ *		the data from the display system to the connected display
+ *		device.
+ * @vidcon0: The base vidcon0 values to control the panel data format.
+ * @vidcon1: The base vidcon1 values to control the panel data output.
+ * @vtiming: Video timing when connected to a RGB type panel.
+ * @win: The setup data for each hardware window, or NULL for unused.
+ * @display_mode: The LCD output display mode.
+ *
+ * The platform data supplies the video driver with all the information
+ * it requires to work with the display(s) attached to the machine. It
+ * controls the initial mode, the number of display windows (0 is always
+ * the base framebuffer) that are initialised etc.
+ *
+ */
+struct s3c_fb_platdata {
+	void	(*setup_gpio)(void);
+
+	struct s3c_fb_pd_win	*win[S3C_FB_MAX_WIN];
+	struct fb_videomode     *vtiming;
+
+	u32			 vidcon0;
+	u32			 vidcon1;
+};
+
+#endif
-- 
cgit v1.2.3-70-g09d2


From e45f265e7ea3ee6de24efe91fe2928d603cb1741 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 5 Apr 2013 11:12:50 +0300
Subject: video: vt8500: fix Kconfig for videomode

OF_DISPLAY_TIMING and OF_VIDEOMODE Kconfig entries have been removed,
and VIDEOMODE_HELPERS should be used now. Fix the Kconfig for VT8500
driver to reflect this.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/Kconfig | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 714d32a279e..8bda6131ae3 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1777,8 +1777,7 @@ config FB_VT8500
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	select FB_MODE_HELPERS
-	select OF_DISPLAY_TIMING
-	select OF_VIDEOMODE
+	select VIDEOMODE_HELPERS
 	help
 	  This is the framebuffer driver for VIA VT8500 integrated LCD
 	  controller.
@@ -1790,8 +1789,7 @@ config FB_WM8505
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	select FB_MODE_HELPERS
-	select OF_DISPLAY_TIMING
-	select OF_VIDEOMODE
+	select VIDEOMODE_HELPERS
 	help
 	  This is the framebuffer driver for WonderMedia WM8xxx-series
 	  integrated LCD controller. This driver covers the WM8505, WM8650
-- 
cgit v1.2.3-70-g09d2


From 6d28c21fe7b0921af57b15673cbafd4d61f2653d Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 17 Apr 2013 13:05:07 +0300
Subject: fbdev/omapfb: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 30 +++++++-----------------------
 1 file changed, 7 insertions(+), 23 deletions(-)

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index ca585ef37f2..717f13a9335 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1101,41 +1101,25 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct fb_fix_screeninfo *fix = &fbi->fix;
 	struct omapfb2_mem_region *rg;
-	unsigned long off;
 	unsigned long start;
 	u32 len;
-	int r = -EINVAL;
-
-	if (vma->vm_end - vma->vm_start == 0)
-		return 0;
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
-		return -EINVAL;
-	off = vma->vm_pgoff << PAGE_SHIFT;
+	int r;
 
 	rg = omapfb_get_mem_region(ofbi->region);
 
 	start = omapfb_get_region_paddr(ofbi);
 	len = fix->smem_len;
-	if (off >= len)
-		goto error;
-	if ((vma->vm_end - vma->vm_start + off) > len)
-		goto error;
-
-	off += start;
 
-	DBG("user mmap region start %lx, len %d, off %lx\n", start, len, off);
+	DBG("user mmap region start %lx, len %d, off %lx\n", start, len,
+			vma->vm_pgoff << PAGE_SHIFT);
 
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-	/* VM_IO | VM_DONTEXPAND | VM_DONTDUMP are set by remap_pfn_range() */
 	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
 	vma->vm_ops = &mmap_user_ops;
 	vma->vm_private_data = rg;
-	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-			       vma->vm_end - vma->vm_start,
-			       vma->vm_page_prot)) {
-		r = -EAGAIN;
+
+	r = vm_iomap_memory(vma, start, len);
+	if (r)
 		goto error;
-	}
 
 	/* vm_ops.open won't be called for mmap itself. */
 	atomic_inc(&rg->map_count);
@@ -1144,7 +1128,7 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 
 	return 0;
 
- error:
+error:
 	omapfb_put_mem_region(ofbi->region);
 
 	return r;
-- 
cgit v1.2.3-70-g09d2


From 47f698a9f2fc49711f3a43ca6713e83f0e76ea5e Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 17 Apr 2013 13:44:19 +0300
Subject: fbdev/controlfb: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/controlfb.c | 50 +++++++++++++++++++----------------------------
 1 file changed, 20 insertions(+), 30 deletions(-)

diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
index 0c189b32a4c..67b77b40aa7 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -285,36 +285,26 @@ static int controlfb_pan_display(struct fb_var_screeninfo *var,
 static int controlfb_mmap(struct fb_info *info,
                        struct vm_area_struct *vma)
 {
-       unsigned long off, start;
-       u32 len;
-
-       off = vma->vm_pgoff << PAGE_SHIFT;
-
-       /* frame buffer memory */
-       start = info->fix.smem_start;
-       len = PAGE_ALIGN((start & ~PAGE_MASK)+info->fix.smem_len);
-       if (off >= len) {
-               /* memory mapped io */
-               off -= len;
-               if (info->var.accel_flags)
-                       return -EINVAL;
-               start = info->fix.mmio_start;
-               len = PAGE_ALIGN((start & ~PAGE_MASK)+info->fix.mmio_len);
-	       vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-       } else {
-               /* framebuffer */
-	       vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
-       }
-       start &= PAGE_MASK;
-       if ((vma->vm_end - vma->vm_start + off) > len)
-       		return -EINVAL;
-       off += start;
-       vma->vm_pgoff = off >> PAGE_SHIFT;
-       if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-           vma->vm_end - vma->vm_start, vma->vm_page_prot))
-               return -EAGAIN;
-
-       return 0;
+	unsigned long mmio_pgoff;
+	unsigned long start;
+	u32 len;
+
+	start = info->fix.smem_start;
+	len = info->fix.smem_len;
+	mmio_pgoff = PAGE_ALIGN((start & ~PAGE_MASK) + len) >> PAGE_SHIFT;
+	if (vma->vm_pgoff >= mmio_pgoff) {
+		if (info->var.accel_flags)
+			return -EINVAL;
+		vma->vm_pgoff -= mmio_pgoff;
+		start = info->fix.mmio_start;
+		len = info->fix.mmio_len;
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	} else {
+		/* framebuffer */
+		vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
+	}
+
+	return vm_iomap_memory(vma, start, len);
 }
 
 static int controlfb_blank(int blank_mode, struct fb_info *info)
-- 
cgit v1.2.3-70-g09d2


From 7b3d1c82417b340c73e416db10770379291010ba Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 17 Apr 2013 13:48:43 +0300
Subject: fbdev/fb-puv3: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
---
 drivers/video/fb-puv3.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/drivers/video/fb-puv3.c b/drivers/video/fb-puv3.c
index 7d106f1f490..27fc956166f 100644
--- a/drivers/video/fb-puv3.c
+++ b/drivers/video/fb-puv3.c
@@ -640,21 +640,9 @@ static int unifb_pan_display(struct fb_var_screeninfo *var,
 int unifb_mmap(struct fb_info *info,
 		    struct vm_area_struct *vma)
 {
-	unsigned long size = vma->vm_end - vma->vm_start;
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
-	unsigned long pos = info->fix.smem_start + offset;
-
-	if (offset + size > info->fix.smem_len)
-		return -EINVAL;
-
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 
-	if (io_remap_pfn_range(vma, vma->vm_start, pos >> PAGE_SHIFT, size,
-				vma->vm_page_prot))
-		return -EAGAIN;
-
-	/* VM_IO | VM_DONTEXPAND | VM_DONTDUMP are set by remap_pfn_range() */
-	return 0;
+	return vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
 }
 
 static struct fb_ops unifb_ops = {
-- 
cgit v1.2.3-70-g09d2


From 51fc8e8aabf1dc89934743c62069acbbe2016fe9 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 17 Apr 2013 13:55:59 +0300
Subject: fbdev/sa1100fb: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index cfbde5e85cb..f34c858642e 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -556,7 +556,7 @@ static int sa1100fb_mmap(struct fb_info *info,
 			 struct vm_area_struct *vma)
 {
 	struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
-	unsigned long start, len, off = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
 
 	if (off < info->fix.smem_len) {
 		vma->vm_pgoff += 1; /* skip over the palette */
@@ -564,19 +564,9 @@ static int sa1100fb_mmap(struct fb_info *info,
 					     fbi->map_dma, fbi->map_size);
 	}
 
-	start = info->fix.mmio_start;
-	len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len);
-
-	if ((vma->vm_end - vma->vm_start + off) > len)
-		return -EINVAL;
-
-	off += start & PAGE_MASK;
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-	vma->vm_flags |= VM_IO;
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-				   vma->vm_end - vma->vm_start,
-				   vma->vm_page_prot);
+
+	return vm_iomap_memory(vma, info->fix.mmio_start, info->fix.mmio_len);
 }
 
 static struct fb_ops sa1100fb_ops = {
-- 
cgit v1.2.3-70-g09d2


From 5171774382959f9a42ecd36bf408f6979effcb6a Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 18 Apr 2013 07:47:47 +0300
Subject: fbdev/vermillion: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alan Hourihane <alanh@fairlite.demon.co.uk>
---
 drivers/video/vermilion/vermilion.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/video/vermilion/vermilion.c b/drivers/video/vermilion/vermilion.c
index 0aa516fc59c..09a136633f3 100644
--- a/drivers/video/vermilion/vermilion.c
+++ b/drivers/video/vermilion/vermilion.c
@@ -1003,24 +1003,18 @@ static int vmlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 static int vmlfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
 {
 	struct vml_info *vinfo = container_of(info, struct vml_info, info);
-	unsigned long size = vma->vm_end - vma->vm_start;
 	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
 	int ret;
 
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
-		return -EINVAL;
-	if (offset + size > vinfo->vram_contig_size)
-		return -EINVAL;
 	ret = vmlfb_vram_offset(vinfo, offset);
 	if (ret)
 		return -EINVAL;
-	offset += vinfo->vram_start;
+
 	pgprot_val(vma->vm_page_prot) |= _PAGE_PCD;
 	pgprot_val(vma->vm_page_prot) &= ~_PAGE_PWT;
-	if (remap_pfn_range(vma, vma->vm_start, offset >> PAGE_SHIFT,
-						size, vma->vm_page_prot))
-		return -EAGAIN;
-	return 0;
+
+	return vm_iomap_memory(vma, vinfo->vram_start,
+			vinfo->vram_contig_size);
 }
 
 static int vmlfb_sync(struct fb_info *info)
-- 
cgit v1.2.3-70-g09d2


From c84deb9d615c02993ce0972a0b34585c7624822f Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 18 Apr 2013 07:50:44 +0300
Subject: fbdev/sgivwfb: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/sgivwfb.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
index 2331fadc272..b2a8912f643 100644
--- a/drivers/video/sgivwfb.c
+++ b/drivers/video/sgivwfb.c
@@ -705,23 +705,17 @@ static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
 static int sgivwfb_mmap(struct fb_info *info,
 			struct vm_area_struct *vma)
 {
-	unsigned long size = vma->vm_end - vma->vm_start;
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	int r;
 
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
-		return -EINVAL;
-	if (offset + size > sgivwfb_mem_size)
-		return -EINVAL;
-	offset += sgivwfb_mem_phys;
 	pgprot_val(vma->vm_page_prot) =
-	    pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
-	vma->vm_flags |= VM_IO;
-	if (remap_pfn_range(vma, vma->vm_start, offset >> PAGE_SHIFT,
-						size, vma->vm_page_prot))
-		return -EAGAIN;
+		pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
+
+	r = vm_iomap_memory(vma, sgivwfb_mem_phys, sgivwfb_mem_size);
+
 	printk(KERN_DEBUG "sgivwfb: mmap framebuffer P(%lx)->V(%lx)\n",
 	       offset, vma->vm_start);
-	return 0;
+
+	return r;
 }
 
 int __init sgivwfb_setup(char *options)
-- 
cgit v1.2.3-70-g09d2


From 11bd5933abe033fb7a3a0d1f1bd2cb4b6df8143f Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 18 Apr 2013 07:52:42 +0300
Subject: fbdev/ps3fb: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
---
 drivers/video/ps3fb.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index 920c27bf394..d9f08c653d6 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -705,21 +705,15 @@ static int ps3fb_pan_display(struct fb_var_screeninfo *var,
 
 static int ps3fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
 {
-	unsigned long size, offset;
+	int r;
 
-	size = vma->vm_end - vma->vm_start;
-	offset = vma->vm_pgoff << PAGE_SHIFT;
-	if (offset + size > info->fix.smem_len)
-		return -EINVAL;
-
-	offset += info->fix.smem_start;
-	if (remap_pfn_range(vma, vma->vm_start, offset >> PAGE_SHIFT,
-			    size, vma->vm_page_prot))
-		return -EAGAIN;
+	r = vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
 
 	dev_dbg(info->device, "ps3fb: mmap framebuffer P(%lx)->V(%lx)\n",
-		offset, vma->vm_start);
-	return 0;
+		info->fix.smem_start + vma->vm_pgoff << PAGE_SHIFT,
+		vma->vm_start);
+
+	return r;
 }
 
     /*
-- 
cgit v1.2.3-70-g09d2


From 04f8afbec37f63fafce16e454a7848426aa36202 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 18 Apr 2013 08:39:47 +0300
Subject: fbdev: improve fb_mmap bounds checks

Improve fb_mmap bounds checks in gbefb, smscufx, udlfb and vfb drivers to
prevent possible uint overflows.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: Bernie Thompson <bernie@plugable.com>
---
 drivers/video/gbefb.c   | 4 +++-
 drivers/video/smscufx.c | 6 +++++-
 drivers/video/udlfb.c   | 6 +++++-
 drivers/video/vfb.c     | 7 +++++--
 4 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index bda5e394151..ceab37020ff 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -1016,7 +1016,9 @@ static int gbefb_mmap(struct fb_info *info,
 	/* check range */
 	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
 		return -EINVAL;
-	if (offset + size > gbe_mem_size)
+	if (size > gbe_mem_size)
+		return -EINVAL;
+	if (offset > gbe_mem_size - size)
 		return -EINVAL;
 
 	/* remap using the fastest write-through mode on architecture */
diff --git a/drivers/video/smscufx.c b/drivers/video/smscufx.c
index 97bd6620c36..b2b33fc1ac3 100644
--- a/drivers/video/smscufx.c
+++ b/drivers/video/smscufx.c
@@ -782,7 +782,11 @@ static int ufx_ops_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
 	unsigned long page, pos;
 
-	if (offset + size > info->fix.smem_len)
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+	if (size > info->fix.smem_len)
+		return -EINVAL;
+	if (offset > info->fix.smem_len - size)
 		return -EINVAL;
 
 	pos = (unsigned long)info->fix.smem_start + offset;
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 86d449ea316..ec03e726c94 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -324,7 +324,11 @@ static int dlfb_ops_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
 	unsigned long page, pos;
 
-	if (offset + size > info->fix.smem_len)
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+	if (size > info->fix.smem_len)
+		return -EINVAL;
+	if (offset > info->fix.smem_len - size)
 		return -EINVAL;
 
 	pos = (unsigned long)info->fix.smem_start + offset;
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index 8bc1f939894..ee5985efa15 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -420,9 +420,12 @@ static int vfb_mmap(struct fb_info *info,
 	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
 	unsigned long page, pos;
 
-	if (offset + size > info->fix.smem_len) {
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+	if (size > info->fix.smem_len)
+		return -EINVAL;
+	if (offset > info->fix.smem_len - size)
 		return -EINVAL;
-	}
 
 	pos = (unsigned long)info->fix.smem_start + offset;
 
-- 
cgit v1.2.3-70-g09d2


From 138f296e140f79cb955caba70690076fb14e6f6d Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 24 Apr 2013 08:35:20 +0300
Subject: fbdev: fix check for fb_mmap's mmio availability

Commit fc9bbca8f650e5f738af8806317c0a041a48ae4a (vm: convert fb_mmap to
vm_iomap_memory() helper) made fbmem.c use vm_iomap_memory, but also
accidentally removed the check for mmio's availability.

Add the check back.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/fbmem.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 86291dcd964..dcb669eb453 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1398,6 +1398,11 @@ fb_mmap(struct file *file, struct vm_area_struct * vma)
 	len = info->fix.smem_len;
 	mmio_pgoff = PAGE_ALIGN((start & ~PAGE_MASK) + len) >> PAGE_SHIFT;
 	if (vma->vm_pgoff >= mmio_pgoff) {
+		if (info->var.accel_flags) {
+			mutex_unlock(&info->mm_lock);
+			return -EINVAL;
+		}
+
 		vma->vm_pgoff -= mmio_pgoff;
 		start = info->fix.mmio_start;
 		len = info->fix.mmio_len;
-- 
cgit v1.2.3-70-g09d2