From 86ea5e6b793d45fa7d2aa504ac3aefc813f0fd55 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Sat, 29 Mar 2014 12:35:35 -0700 Subject: Input: pmic8xxx-keypad - migrate to DT The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd Signed-off-by: Dmitry Torokhov --- .../bindings/input/qcom,pm8xxx-keypad.txt | 89 ++++++++++++ drivers/input/keyboard/pmic8xxx-keypad.c | 150 ++++++++++++--------- include/linux/input/pmic8xxx-keypad.h | 52 ------- 3 files changed, 175 insertions(+), 116 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt delete mode 100644 include/linux/input/pmic8xxx-keypad.h diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt new file mode 100644 index 00000000000..7d8cb92831d --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt @@ -0,0 +1,89 @@ +Qualcomm PM8xxx PMIC Keypad + +PROPERTIES + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,pm8058-keypad" + "qcom,pm8921-keypad" + +- reg: + Usage: required + Value type: + Definition: address of keypad control register + +- interrupts: + Usage: required + Value type: + Definition: the first interrupt specifies the key sense interrupt + and the second interrupt specifies the key stuck interrupt. + The format of the specifier is defined by the binding + document describing the node's interrupt parent. + +- linux,keymap: + Usage: required + Value type: + Definition: the linux keymap. More information can be found in + input/matrix-keymap.txt. + +- linux,keypad-no-autorepeat: + Usage: optional + Value type: + Definition: don't enable autorepeat feature. + +- linux,keypad-wakeup: + Usage: optional + Value type: + Definition: use any event on keypad as wakeup event. + +- keypad,num-rows: + Usage: required + Value type: + Definition: number of rows in the keymap. More information can be found + in input/matrix-keymap.txt. + +- keypad,num-columns: + Usage: required + Value type: + Definition: number of columns in the keymap. More information can be + found in input/matrix-keymap.txt. + +- debounce: + Usage: optional + Value type: + Definition: time in microseconds that key must be pressed or release + for key sense interrupt to trigger. + +- scan-delay: + Usage: optional + Value type: + Definition: time in microseconds to pause between successive scans + of the matrix array. + +- row-hold: + Usage: optional + Value type: + Definition: time in nanoseconds to pause between scans of each row in + the matrix array. + +EXAMPLE + + keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 1>, <75 1>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c index 0efd11e16b7..80c6b0ef3fc 100644 --- a/drivers/input/keyboard/pmic8xxx-keypad.c +++ b/drivers/input/keyboard/pmic8xxx-keypad.c @@ -20,8 +20,8 @@ #include #include #include - -#include +#include +#include #define PM8XXX_MAX_ROWS 18 #define PM8XXX_MAX_COLS 8 @@ -84,7 +84,8 @@ /** * struct pmic8xxx_kp - internal keypad data structure - * @pdata - keypad platform data pointer + * @num_cols - number of columns of keypad + * @num_rows - number of row of keypad * @input - input device pointer for keypad * @regmap - regmap handle * @key_sense_irq - key press/release irq number @@ -96,7 +97,8 @@ * @ctrl_reg - control register value */ struct pmic8xxx_kp { - const struct pm8xxx_keypad_platform_data *pdata; + unsigned int num_rows; + unsigned int num_cols; struct input_dev *input; struct regmap *regmap; int key_sense_irq; @@ -115,9 +117,9 @@ static u8 pmic8xxx_col_state(struct pmic8xxx_kp *kp, u8 col) { /* all keys pressed on that particular row? */ if (col == 0x00) - return 1 << kp->pdata->num_cols; + return 1 << kp->num_cols; else - return col & ((1 << kp->pdata->num_cols) - 1); + return col & ((1 << kp->num_cols) - 1); } /* @@ -180,10 +182,10 @@ static int pmic8xxx_kp_read_matrix(struct pmic8xxx_kp *kp, u16 *new_state, int rc, read_rows; unsigned int scan_val; - if (kp->pdata->num_rows < PM8XXX_MIN_ROWS) + if (kp->num_rows < PM8XXX_MIN_ROWS) read_rows = PM8XXX_MIN_ROWS; else - read_rows = kp->pdata->num_rows; + read_rows = kp->num_rows; pmic8xxx_chk_sync_read(kp); @@ -227,13 +229,13 @@ static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state, { int row, col, code; - for (row = 0; row < kp->pdata->num_rows; row++) { + for (row = 0; row < kp->num_rows; row++) { int bits_changed = new_state[row] ^ old_state[row]; if (!bits_changed) continue; - for (col = 0; col < kp->pdata->num_cols; col++) { + for (col = 0; col < kp->num_cols; col++) { if (!(bits_changed & (1 << col))) continue; @@ -259,9 +261,9 @@ static bool pmic8xxx_detect_ghost_keys(struct pmic8xxx_kp *kp, u16 *new_state) u16 check, row_state; check = 0; - for (row = 0; row < kp->pdata->num_rows; row++) { + for (row = 0; row < kp->num_rows; row++) { row_state = (~new_state[row]) & - ((1 << kp->pdata->num_cols) - 1); + ((1 << kp->num_cols) - 1); if (hweight16(row_state) > 1) { if (found_first == -1) @@ -369,8 +371,13 @@ static irqreturn_t pmic8xxx_kp_irq(int irq, void *data) return IRQ_HANDLED; } -static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp) +static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp, + struct platform_device *pdev) { + const struct device_node *of_node = pdev->dev.of_node; + unsigned int scan_delay_ms; + unsigned int row_hold_ns; + unsigned int debounce_ms; int bits, rc, cycles; u8 scan_val = 0, ctrl_val = 0; static const u8 row_bits[] = { @@ -378,18 +385,18 @@ static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp) }; /* Find column bits */ - if (kp->pdata->num_cols < KEYP_CTRL_SCAN_COLS_MIN) + if (kp->num_cols < KEYP_CTRL_SCAN_COLS_MIN) bits = 0; else - bits = kp->pdata->num_cols - KEYP_CTRL_SCAN_COLS_MIN; + bits = kp->num_cols - KEYP_CTRL_SCAN_COLS_MIN; ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) << KEYP_CTRL_SCAN_COLS_SHIFT; /* Find row bits */ - if (kp->pdata->num_rows < KEYP_CTRL_SCAN_ROWS_MIN) + if (kp->num_rows < KEYP_CTRL_SCAN_ROWS_MIN) bits = 0; else - bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN]; + bits = row_bits[kp->num_rows - KEYP_CTRL_SCAN_ROWS_MIN]; ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT); @@ -399,15 +406,44 @@ static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp) return rc; } - bits = (kp->pdata->debounce_ms / 5) - 1; + if (of_property_read_u32(of_node, "scan-delay", &scan_delay_ms)) + scan_delay_ms = MIN_SCAN_DELAY; + + if (scan_delay_ms > MAX_SCAN_DELAY || scan_delay_ms < MIN_SCAN_DELAY || + !is_power_of_2(scan_delay_ms)) { + dev_err(&pdev->dev, "invalid keypad scan time supplied\n"); + return -EINVAL; + } + + if (of_property_read_u32(of_node, "row-hold", &row_hold_ns)) + row_hold_ns = MIN_ROW_HOLD_DELAY; + + if (row_hold_ns > MAX_ROW_HOLD_DELAY || + row_hold_ns < MIN_ROW_HOLD_DELAY || + ((row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) { + dev_err(&pdev->dev, "invalid keypad row hold time supplied\n"); + return -EINVAL; + } + + if (of_property_read_u32(of_node, "debounce", &debounce_ms)) + debounce_ms = MIN_DEBOUNCE_TIME; + + if (((debounce_ms % 5) != 0) || + debounce_ms > MAX_DEBOUNCE_TIME || + debounce_ms < MIN_DEBOUNCE_TIME) { + dev_err(&pdev->dev, "invalid debounce time supplied\n"); + return -EINVAL; + } + + bits = (debounce_ms / 5) - 1; scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT); - bits = fls(kp->pdata->scan_delay_ms) - 1; + bits = fls(scan_delay_ms) - 1; scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT); /* Row hold time is a multiple of 32KHz cycles. */ - cycles = (kp->pdata->row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC; + cycles = (row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC; scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT); @@ -471,50 +507,27 @@ static void pmic8xxx_kp_close(struct input_dev *dev) */ static int pmic8xxx_kp_probe(struct platform_device *pdev) { - const struct pm8xxx_keypad_platform_data *pdata = - dev_get_platdata(&pdev->dev); - const struct matrix_keymap_data *keymap_data; + unsigned int rows, cols; + bool repeat; + bool wakeup; struct pmic8xxx_kp *kp; int rc; unsigned int ctrl_val; - if (!pdata || !pdata->num_cols || !pdata->num_rows || - pdata->num_cols > PM8XXX_MAX_COLS || - pdata->num_rows > PM8XXX_MAX_ROWS || - pdata->num_cols < PM8XXX_MIN_COLS) { - dev_err(&pdev->dev, "invalid platform data\n"); - return -EINVAL; - } - - if (!pdata->scan_delay_ms || - pdata->scan_delay_ms > MAX_SCAN_DELAY || - pdata->scan_delay_ms < MIN_SCAN_DELAY || - !is_power_of_2(pdata->scan_delay_ms)) { - dev_err(&pdev->dev, "invalid keypad scan time supplied\n"); - return -EINVAL; - } - - if (!pdata->row_hold_ns || - pdata->row_hold_ns > MAX_ROW_HOLD_DELAY || - pdata->row_hold_ns < MIN_ROW_HOLD_DELAY || - ((pdata->row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) { - dev_err(&pdev->dev, "invalid keypad row hold time supplied\n"); - return -EINVAL; - } + rc = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols); + if (rc) + return rc; - if (!pdata->debounce_ms || - ((pdata->debounce_ms % 5) != 0) || - pdata->debounce_ms > MAX_DEBOUNCE_TIME || - pdata->debounce_ms < MIN_DEBOUNCE_TIME) { - dev_err(&pdev->dev, "invalid debounce time supplied\n"); + if (cols > PM8XXX_MAX_COLS || rows > PM8XXX_MAX_ROWS || + cols < PM8XXX_MIN_COLS) { + dev_err(&pdev->dev, "invalid platform data\n"); return -EINVAL; } - keymap_data = pdata->keymap_data; - if (!keymap_data) { - dev_err(&pdev->dev, "no keymap data supplied\n"); - return -EINVAL; - } + repeat = !of_property_read_bool(pdev->dev.of_node, + "linux,input-no-autorepeat"); + wakeup = of_property_read_bool(pdev->dev.of_node, + "linux,keypad-wakeup"); kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL); if (!kp) @@ -526,7 +539,8 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev) platform_set_drvdata(pdev, kp); - kp->pdata = pdata; + kp->num_rows = rows; + kp->num_cols = cols; kp->dev = &pdev->dev; kp->input = devm_input_allocate_device(&pdev->dev); @@ -547,8 +561,8 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev) return kp->key_stuck_irq; } - kp->input->name = pdata->input_name ? : "PMIC8XXX keypad"; - kp->input->phys = pdata->input_phys_device ? : "pmic8xxx_keypad/input0"; + kp->input->name = "PMIC8XXX keypad"; + kp->input->phys = "pmic8xxx_keypad/input0"; kp->input->id.bustype = BUS_I2C; kp->input->id.version = 0x0001; @@ -558,7 +572,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev) kp->input->open = pmic8xxx_kp_open; kp->input->close = pmic8xxx_kp_close; - rc = matrix_keypad_build_keymap(keymap_data, NULL, + rc = matrix_keypad_build_keymap(NULL, NULL, PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS, kp->keycodes, kp->input); if (rc) { @@ -566,7 +580,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev) return rc; } - if (pdata->rep) + if (repeat) __set_bit(EV_REP, kp->input->evbit); input_set_capability(kp->input, EV_MSC, MSC_SCAN); @@ -576,7 +590,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev) memset(kp->keystate, 0xff, sizeof(kp->keystate)); memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate)); - rc = pmic8xxx_kpd_init(kp); + rc = pmic8xxx_kpd_init(kp, pdev); if (rc < 0) { dev_err(&pdev->dev, "unable to initialize keypad controller\n"); return rc; @@ -612,7 +626,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev) return rc; } - device_init_wakeup(&pdev->dev, pdata->wakeup); + device_init_wakeup(&pdev->dev, wakeup); return 0; } @@ -662,12 +676,20 @@ static int pmic8xxx_kp_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops, pmic8xxx_kp_suspend, pmic8xxx_kp_resume); +static const struct of_device_id pm8xxx_match_table[] = { + { .compatible = "qcom,pm8058-keypad" }, + { .compatible = "qcom,pm8921-keypad" }, + { } +}; +MODULE_DEVICE_TABLE(of, pm8xxx_match_table); + static struct platform_driver pmic8xxx_kp_driver = { .probe = pmic8xxx_kp_probe, .driver = { - .name = PM8XXX_KEYPAD_DEV_NAME, + .name = "pm8xxx-keypad", .owner = THIS_MODULE, .pm = &pm8xxx_kp_pm_ops, + .of_match_table = pm8xxx_match_table, }, }; module_platform_driver(pmic8xxx_kp_driver); diff --git a/include/linux/input/pmic8xxx-keypad.h b/include/linux/input/pmic8xxx-keypad.h deleted file mode 100644 index 5f1e2f9ad95..00000000000 --- a/include/linux/input/pmic8xxx-keypad.h +++ /dev/null @@ -1,52 +0,0 @@ -/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __PMIC8XXX_KEYPAD_H__ -#define __PMIC8XXX_KEYPAD_H__ - -#include - -#define PM8XXX_KEYPAD_DEV_NAME "pm8xxx-keypad" - -/** - * struct pm8xxx_keypad_platform_data - platform data for keypad - * @keymap_data - matrix keymap data - * @input_name - input device name - * @input_phys_device - input device name - * @num_cols - number of columns of keypad - * @num_rows - number of row of keypad - * @debounce_ms - debounce period in milliseconds - * @scan_delay_ms - scan delay in milliseconds - * @row_hold_ns - row hold period in nanoseconds - * @wakeup - configure keypad as wakeup - * @rep - enable or disable key repeat bit - */ -struct pm8xxx_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - - const char *input_name; - const char *input_phys_device; - - unsigned int num_cols; - unsigned int num_rows; - unsigned int rows_gpio_start; - unsigned int cols_gpio_start; - - unsigned int debounce_ms; - unsigned int scan_delay_ms; - unsigned int row_hold_ns; - - bool wakeup; - bool rep; -}; - -#endif /*__PMIC8XXX_KEYPAD_H__ */ -- cgit v1.2.3-70-g09d2