From 4f6fdf08681cecd9f38499de7a02eb4f05f399a7 Mon Sep 17 00:00:00 2001 From: Chase Douglas Date: Fri, 5 Aug 2011 09:16:57 -0700 Subject: HID: magicmouse: Set resolution of touch surfaces Add touch surface resolution information. The size of the touch surfaces has been determined to the hundredth of a mm. Cc: Jiri Kosina Cc: Michael Poole Cc: linux-input@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Chase Douglas [jkosina@suse.cz: update comments and commit message] Signed-off-by: Jiri Kosina --- drivers/hid/hid-magicmouse.c | 56 ++++++++++++++++++++++++++++++++++++-------- 1 file changed, 46 insertions(+), 10 deletions(-) diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 0ec91c18a42..b5bdab3299b 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -81,6 +81,28 @@ MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state fie #define NO_TOUCHES -1 #define SINGLE_TOUCH_UP -2 +/* Touch surface information. Dimension is in hundredths of a mm, min and max + * are in units. */ +#define MOUSE_DIMENSION_X (float)9056 +#define MOUSE_MIN_X -1100 +#define MOUSE_MAX_X 1258 +#define MOUSE_RES_X ((MOUSE_MAX_X - MOUSE_MIN_X) / (MOUSE_DIMENSION_X / 100)) +#define MOUSE_DIMENSION_Y (float)5152 +#define MOUSE_MIN_Y -1589 +#define MOUSE_MAX_Y 2047 +#define MOUSE_RES_Y ((MOUSE_MAX_Y - MOUSE_MIN_Y) / (MOUSE_DIMENSION_Y / 100)) + +#define TRACKPAD_DIMENSION_X (float)13000 +#define TRACKPAD_MIN_X -2909 +#define TRACKPAD_MAX_X 3167 +#define TRACKPAD_RES_X \ + ((TRACKPAD_MAX_X - TRACKPAD_MIN_X) / (TRACKPAD_DIMENSION_X / 100)) +#define TRACKPAD_DIMENSION_Y (float)11000 +#define TRACKPAD_MIN_Y -2456 +#define TRACKPAD_MAX_Y 2565 +#define TRACKPAD_RES_Y \ + ((TRACKPAD_MAX_Y - TRACKPAD_MIN_Y) / (TRACKPAD_DIMENSION_Y / 100)) + /** * struct magicmouse_sc - Tracks Magic Mouse-specific data. * @input: Input device through which we report events. @@ -406,17 +428,31 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h * inverse of the reported Y. */ if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) { - input_set_abs_params(input, ABS_MT_POSITION_X, -1100, - 1358, 4, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, -1589, - 2047, 4, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, + MOUSE_MIN_X, MOUSE_MAX_X, 4, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, + MOUSE_MIN_Y, MOUSE_MAX_Y, 4, 0); + + input_abs_set_res(input, ABS_MT_POSITION_X, + MOUSE_RES_X); + input_abs_set_res(input, ABS_MT_POSITION_Y, + MOUSE_RES_Y); } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */ - input_set_abs_params(input, ABS_X, -2909, 3167, 4, 0); - input_set_abs_params(input, ABS_Y, -2456, 2565, 4, 0); - input_set_abs_params(input, ABS_MT_POSITION_X, -2909, - 3167, 4, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, -2456, - 2565, 4, 0); + input_set_abs_params(input, ABS_X, TRACKPAD_MIN_X, + TRACKPAD_MAX_X, 4, 0); + input_set_abs_params(input, ABS_Y, TRACKPAD_MIN_Y, + TRACKPAD_MAX_Y, 4, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, + TRACKPAD_MIN_X, TRACKPAD_MAX_X, 4, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, + TRACKPAD_MIN_Y, TRACKPAD_MAX_Y, 4, 0); + + input_abs_set_res(input, ABS_X, TRACKPAD_RES_X); + input_abs_set_res(input, ABS_Y, TRACKPAD_RES_Y); + input_abs_set_res(input, ABS_MT_POSITION_X, + TRACKPAD_RES_X); + input_abs_set_res(input, ABS_MT_POSITION_Y, + TRACKPAD_RES_Y); } input_set_events_per_packet(input, 60); -- cgit v1.2.3-70-g09d2 From 35d851df23b093ee027f827fed2213ae5e88fc7a Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 25 Aug 2011 14:21:37 +0200 Subject: HID: magicmouse: ignore 'ivalid report id' while switching modes, v2 This is basically a more generic respin of 23746a6 ("HID: magicmouse: ignore 'ivalid report id' while switching modes") which got reverted later by c3a492. It turns out that on some configurations, this is actually still the case and we are not able to detect in runtime. The device reponds with 'invalid report id' when feature report switching it into multitouch mode is sent to it. This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK on Sent Reports"), but since this commit, it propagates -EIO from the _raw callback . So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's how the device reacts in normal mode. Sad, but following reality. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022 Reported-by: Chase Douglas Reported-by: Jaikumar Ganesh Tested-by: Chase Douglas Tested-by: Jaikumar Ganesh Signed-off-by: Jiri Kosina --- drivers/hid/hid-magicmouse.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index b5bdab3299b..f0fbd7bd239 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -537,9 +537,17 @@ static int magicmouse_probe(struct hid_device *hdev, } report->size = 6; + /* + * Some devices repond with 'invalid report id' when feature + * report switching it into multitouch mode is sent to it. + * + * This results in -EIO from the _raw low-level transport callback, + * but there seems to be no other way of switching the mode. + * Thus the super-ugly hacky success check below. + */ ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature), HID_FEATURE_REPORT); - if (ret != sizeof(feature)) { + if (ret != -EIO && ret != sizeof(feature)) { hid_err(hdev, "unable to request touch data (%d)\n", ret); goto err_stop_hw; } -- cgit v1.2.3-70-g09d2 From 6d1db0777981e1626ae71243984ac300b61789ff Mon Sep 17 00:00:00 2001 From: Clemens Werther Date: Thu, 25 Aug 2011 15:35:14 +0200 Subject: HID: add support for HuiJia USB Gamepad connector Create each gamepad as a separate joystick Signed-off-by: Clemens Werther Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 7d27d2b0445..7484e1b6724 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -277,6 +277,7 @@ #define USB_DEVICE_ID_PENPOWER 0x00f4 #define USB_VENDOR_ID_GREENASIA 0x0e8f +#define USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD 0x3013 #define USB_VENDOR_ID_GRETAGMACBETH 0x0971 #define USB_DEVICE_ID_GRETAGMACBETH_HUEY 0x2005 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 4bdb5d46c52..3146fdcda27 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -47,6 +47,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL }, { USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS }, { USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT }, -- cgit v1.2.3-70-g09d2 From dde58cfcc3b6dd2f160ffd355f76ae526155a4df Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Mon, 5 Sep 2011 18:45:28 +0200 Subject: HID: wacom: Fix error path of power-supply initialization power_supply_unregister() must not be called if power_supply_register() failed. The wdata->psy.dev pointer may point to invalid memory after a failed power_supply_register() and hence wacom_remove() will fail while calling power_supply_unregister(). This changes the wacom_probe function to fail if it cannot register the power_supply devices. If we would want to keep the previous behaviour we had to keep some flag about the power_supply state and check it on wacom_remove, but this seems inappropriate here. Hence, we simply fail, too, if power_supply_register fails. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-wacom.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 06888323828..f66a597cff6 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -353,11 +353,7 @@ static int wacom_probe(struct hid_device *hdev, if (ret) { hid_warn(hdev, "can't create sysfs battery attribute, err: %d\n", ret); - /* - * battery attribute is not critical for the tablet, but if it - * failed then there is no need to create ac attribute - */ - goto move_on; + goto err_battery; } wdata->ac.properties = wacom_ac_props; @@ -371,14 +367,8 @@ static int wacom_probe(struct hid_device *hdev, if (ret) { hid_warn(hdev, "can't create ac battery attribute, err: %d\n", ret); - /* - * ac attribute is not critical for the tablet, but if it - * failed then we don't want to battery attribute to exist - */ - power_supply_unregister(&wdata->battery); + goto err_ac; } - -move_on: #endif hidinput = list_entry(hdev->inputs.next, struct hid_input, list); input = hidinput->input; @@ -416,6 +406,13 @@ move_on: return 0; +#ifdef CONFIG_HID_WACOM_POWER_SUPPLY +err_ac: + power_supply_unregister(&wdata->battery); +err_battery: + device_remove_file(&hdev->dev, &dev_attr_speed); + hid_hw_stop(hdev); +#endif err_free: kfree(wdata); return ret; -- cgit v1.2.3-70-g09d2 From 9086617ea3a7f3e574ca64392b827bdd56f607eb Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Mon, 5 Sep 2011 18:45:29 +0200 Subject: HID: wacom: Unregister sysfs attributes on remove HID devices can be hotplugged so we should unregister all sysfs attributes when removing a driver. Otherwise, manually unloading the wacom-driver will not remove the sysfs attributes. Only when the device is disconnected, they are removed, eventually. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-wacom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index f66a597cff6..a597039d075 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -423,6 +423,7 @@ static void wacom_remove(struct hid_device *hdev) #ifdef CONFIG_HID_WACOM_POWER_SUPPLY struct wacom_data *wdata = hid_get_drvdata(hdev); #endif + device_remove_file(&hdev->dev, &dev_attr_speed); hid_hw_stop(hdev); #ifdef CONFIG_HID_WACOM_POWER_SUPPLY -- cgit v1.2.3-70-g09d2