From aff4c343614f0c9980352810df70969821cba95f Mon Sep 17 00:00:00 2001 From: Alan Cox <alan@linux.intel.com> Date: Tue, 31 Aug 2010 22:20:55 -0700 Subject: Staging: mrst_touchscreen - clean up input side Fix most of the stuff that Dmitry pointed out. This leaves the mutex in IRQ and misuse of SPI to sort out. Also fix the build bits so it actually builds in staging - whoops. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> --- drivers/staging/Makefile | 2 +- drivers/staging/mrst-touchscreen/Kconfig | 2 +- drivers/staging/mrst-touchscreen/Makefile | 2 +- drivers/staging/mrst-touchscreen/TODO | 2 + drivers/staging/mrst-touchscreen/intel-mid-touch.c | 98 +++++----------------- 5 files changed, 25 insertions(+), 81 deletions(-) diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 9fa25133874..d071bac73ac 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -52,5 +52,5 @@ obj-$(CONFIG_CXT1E1) += cxt1e1/ obj-$(CONFIG_TI_ST) += ti-st/ obj-$(CONFIG_ADIS16255) += adis16255/ obj-$(CONFIG_FB_XGI) += xgifb/ -obj-$(CONFIG_TOUCHSCREEN_MRSTOUCH) += mrst-touchscreen/ +obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += mrst-touchscreen/ obj-$(CONFIG_MSM_STAGING) += msm/ diff --git a/drivers/staging/mrst-touchscreen/Kconfig b/drivers/staging/mrst-touchscreen/Kconfig index c2af4921708..775d740bb61 100644 --- a/drivers/staging/mrst-touchscreen/Kconfig +++ b/drivers/staging/mrst-touchscreen/Kconfig @@ -1,6 +1,6 @@ config TOUCHSCREEN_INTEL_MID tristate "Intel MID platform resistive touchscreen" - depends on INTEL_SCU_IPC + depends on INTEL_SCU_IPC && INPUT_TOUCHSCREEN default y help Say Y here if you have a Intel MID based touchscreen diff --git a/drivers/staging/mrst-touchscreen/Makefile b/drivers/staging/mrst-touchscreen/Makefile index 2d638b0d70b..155f58b57db 100644 --- a/drivers/staging/mrst-touchscreen/Makefile +++ b/drivers/staging/mrst-touchscreen/Makefile @@ -1,3 +1,3 @@ -obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) := intel_mid_touch.o +obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) := intel-mid-touch.o diff --git a/drivers/staging/mrst-touchscreen/TODO b/drivers/staging/mrst-touchscreen/TODO index 7157028d634..84aa6958d0a 100644 --- a/drivers/staging/mrst-touchscreen/TODO +++ b/drivers/staging/mrst-touchscreen/TODO @@ -1,2 +1,4 @@ - Move the driver to not think it is SPI (requires fixing some of the SFI and firmware side) +- Fix mutex in IRQ stuff - threaded IRQ ? + diff --git a/drivers/staging/mrst-touchscreen/intel-mid-touch.c b/drivers/staging/mrst-touchscreen/intel-mid-touch.c index abba22f921b..6fed01ee82d 100644 --- a/drivers/staging/mrst-touchscreen/intel-mid-touch.c +++ b/drivers/staging/mrst-touchscreen/intel-mid-touch.c @@ -23,7 +23,6 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * * TODO: - * kill off mrstouch_debug eventually * review conversion of r/m/w sequences * Replace interrupt mutex abuse * Kill of mrstouchdevp pointer @@ -43,16 +42,6 @@ #include <asm/intel_scu_ipc.h> -#if defined(MRSTOUCH_DEBUG) -#define mrstouch_debug(fmt, args...)\ - do { \ - printk(KERN_DEBUG "\n[MRSTOUCH(%d)] - ", __LINE__); \ - printk(KERN_DEBUG fmt, ##args); \ - } while (0); -#else -#define mrstouch_debug(fmt, args...) -#endif - /* PMIC Interrupt registers */ #define PMIC_REG_ID1 0x00 /*PMIC ID1 register */ @@ -100,6 +89,9 @@ #define MAX_X 1024 #define MIN_Y 10 #define MAX_Y 1024 +#define MIN_P 0 +#define MAX_P TOUCH_PRESSURE_FS + #define WAIT_ADC_COMPLETION 10 /* PMIC ADC round robin delays */ @@ -124,8 +116,6 @@ struct mrstouch_dev { int irq; /* Touch screen IRQ # */ uint vendor; /* PMIC vendor */ uint rev; /* PMIC revision */ - bool suspended; /* Device suspended status */ - bool disabled; /* Device disabled status */ u16 x; /* X coordinate */ u16 y; /* Y coordinate */ bool pendown; /* PEN position */ @@ -320,8 +310,6 @@ static int mrstouch_adc_init(struct mrstouch_dev *tsdev) tsdev->asr = start; - mrstouch_debug("Channel offset(%d): 0x%X\n", tsdev->asr, tsdev->vendor); - /* ADC power on, start, enable PENDET and set loop delay * ADC loop delay is set to 4.5 ms approximately * Loop delay more than this results in jitter in adc readings @@ -355,7 +343,6 @@ static void mrstouch_report_xy(struct mrstouch_dev *tsdev, u16 x, u16 y, u16 z) if (tsdev->pendown && z <= TOUCH_PRESSURE) { /* Pen removed, report button release */ - mrstouch_debug("BTN REL(%d)", z); input_report_key(tsdev->input, BTN_TOUCH, 0); tsdev->pendown = false; } @@ -371,7 +358,6 @@ static void mrstouch_report_xy(struct mrstouch_dev *tsdev, u16 x, u16 y, u16 z) if (x < MIN_X || x > MAX_X || y < MIN_Y || y > MAX_Y) { /* Spurious values, release button if touched and return */ if (tsdev->pendown) { - mrstouch_debug("BTN REL(%d)", z); input_report_key(tsdev->input, BTN_TOUCH, 0); tsdev->pendown = false; } @@ -382,13 +368,13 @@ static void mrstouch_report_xy(struct mrstouch_dev *tsdev, u16 x, u16 y, u16 z) input_report_abs(tsdev->input, ABS_X, x); input_report_abs(tsdev->input, ABS_Y, y); + input_report_abs(tsdev->input, ABS_PRESSURE, z); input_sync(tsdev->input); } if (!tsdev->pendown && z > TOUCH_PRESSURE) { /* Pen touched, report button touch */ - mrstouch_debug("BTN TCH(%d, %d, %d)", x, y, z); input_report_key(tsdev->input, BTN_TOUCH, 1); tsdev->pendown = true; } @@ -446,18 +432,7 @@ static int mrstouch_pmic_fs_adc_read(struct mrstouch_dev *tsdev) z |= data[1] & 0x7; /* Lower 3 bits */ z &= 0x3FF; -#if defined(MRSTOUCH_PRINT_XYZP) - mrstouch_debug("X: %d, Y: %d, Z: %d", x, y, z); -#endif - - if (z >= TOUCH_PRESSURE_FS) { - mrstouch_report_xy(tsdev, x, y, TOUCH_PRESSURE - 1); /* Pen Removed */ - return TOUCH_PRESSURE - 1; - } else { - mrstouch_report_xy(tsdev, x, y, TOUCH_PRESSURE + 1); /* Pen Touched */ - return TOUCH_PRESSURE + 1; - } - + mrstouch_report_xy(tsdev, x, y, z); return 0; ipc_error: @@ -615,14 +590,6 @@ static int mrstouch_adc_read(struct mrstouch_dev *tsdev) if (err) goto ipc_error; -#if defined(MRSTOUCH_PRINT_XYZP) - printk(KERN_INFO "X+: %d, Y+: %d, Z+: %d\n", xp, yp, zp); -#endif - -#if defined(MRSTOUCH_PRINT_XYZM) - printk(KERN_INFO "X-: %d, Y-: %d, Z-: %d\n", xm, ym, zm); -#endif - mrstouch_report_xy(tsdev, xp, yp, zp); /* report x and y to eventX */ return zp; @@ -694,12 +661,10 @@ static int ts_input_dev_init(struct mrstouch_dev *tsdev, struct spi_device *spi) { int err = 0; - mrstouch_debug("%s", __func__); - tsdev->input = input_allocate_device(); if (!tsdev->input) { dev_err(&tsdev->spi->dev, "Unable to allocate input device.\n"); - return -EINVAL; + return -ENOMEM; } tsdev->input->name = "mrst_touchscreen"; @@ -714,8 +679,9 @@ static int ts_input_dev_init(struct mrstouch_dev *tsdev, struct spi_device *spi) tsdev->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); tsdev->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - input_set_abs_params(tsdev->input, ABS_X, MIN_X, MIN_Y, 0, 0); - input_set_abs_params(tsdev->input, ABS_Y, MIN_X, MIN_Y, 0, 0); + input_set_abs_params(tsdev->input, ABS_X, MIN_X, MAX_X, 0, 0); + input_set_abs_params(tsdev->input, ABS_Y, MIN_Y, MAX_Y, 0, 0); + input_set_abs_params(tsdev->input, ABS_PRESSURE, MIN_P, MAX_P, 0, 0); err = input_register_device(tsdev->input); if (err) { @@ -723,9 +689,6 @@ static int ts_input_dev_init(struct mrstouch_dev *tsdev, struct spi_device *spi) input_free_device(tsdev->input); return err; } - - mrstouch_debug("%s", "mrstouch initialized"); - return 0; } @@ -737,8 +700,6 @@ static int __devinit mrstouch_probe(struct spi_device *mrstouch_spi) unsigned int myirq; struct mrstouch_dev *tsdev; - mrstouch_debug("%s(%p)", __func__, mrstouch_spi); - mrstouchdevp = NULL; myirq = mrstouch_spi->irq; @@ -768,18 +729,17 @@ static int __devinit mrstouch_probe(struct spi_device *mrstouch_spi) err = ts_input_dev_init(tsdev, mrstouch_spi); if (err) { dev_err(&tsdev->spi->dev, "ts_input_dev_init failed"); - goto mrstouch_err_free_mem; + goto mrstouch_err_free_dev; } mutex_init(&tsdev->lock); - mutex_lock(&tsdev->lock) + mutex_lock(&tsdev->lock); - mrstouch_debug("Requesting IRQ-%d", myirq); err = request_irq(myirq, pendet_intr_handler, 0, "mrstouch", tsdev); if (err) { dev_err(&tsdev->spi->dev, "unable to allocate irq\n"); - goto mrstouch_err_free_mem; + goto mrstouch_err_free_dev; } tsdev->pendet_thrd = kthread_run(mrstouch_pendet, @@ -787,38 +747,24 @@ static int __devinit mrstouch_probe(struct spi_device *mrstouch_spi) if (IS_ERR(tsdev->pendet_thrd)) { dev_err(&tsdev->spi->dev, "kthread_run failed\n"); err = PTR_ERR(tsdev->pendet_thrd); - goto mrstouch_err_free_mem; + goto mrstouch_err_free_irq; } - mrstouch_debug("%s", "Driver initialized"); return 0; - +mrstouch_err_free_irq: + free_irq(myirq, tsdev); +mrstouch_err_free_dev: + input_unregister_device(tsdev->input); mrstouch_err_free_mem: kfree(tsdev); return err; } -static int mrstouch_suspend(struct spi_device *spi, pm_message_t msg) -{ - mrstouch_debug("%s", __func__); - mrstouchdevp->suspended = 1; - return 0; -} - -static int mrstouch_resume(struct spi_device *spi) -{ - mrstouch_debug("%s", __func__); - mrstouchdevp->suspended = 0; - return 0; -} - static int mrstouch_remove(struct spi_device *spi) { - mrstouch_debug("%s", __func__); free_irq(mrstouchdevp->irq, mrstouchdevp); - input_unregister_device(mrstouchdevp->input); - input_free_device(mrstouchdevp->input); if (mrstouchdevp->pendet_thrd) kthread_stop(mrstouchdevp->pendet_thrd); + input_unregister_device(mrstouchdevp->input); kfree(mrstouchdevp); return 0; } @@ -830,8 +776,6 @@ static struct spi_driver mrstouch_driver = { .owner = THIS_MODULE, }, .probe = mrstouch_probe, - .suspend = mrstouch_suspend, - .resume = mrstouch_resume, .remove = mrstouch_remove, }; @@ -839,11 +783,10 @@ static int __init mrstouch_module_init(void) { int err; - mrstouch_debug("%s", __func__); err = spi_register_driver(&mrstouch_driver); if (err) { - mrstouch_debug("%s(%d)", "SPI PENDET failed", err); - return -1; + printk(KERN_ERR "%s(%d)", "SPI PENDET failed", err); + return err;; } return 0; @@ -851,7 +794,6 @@ static int __init mrstouch_module_init(void) static void __exit mrstouch_module_exit(void) { - mrstouch_debug("%s", __func__); spi_unregister_driver(&mrstouch_driver); return; } -- cgit v1.2.3-70-g09d2 From 95b7127c1141bddd3cff30415c7d6e656f335a35 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov <dtor@mail.ru> Date: Tue, 31 Aug 2010 22:57:28 -0700 Subject: Staging: mrst_touchscreen - more fixes Changes: - switch to use threaded IRQ - more __devinit/__devexit annotations - rely on input core to remove jitter from events - global pointer removed - NEC/MAXIM/Freescale handling factored out Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> --- drivers/staging/mrst-touchscreen/intel-mid-touch.c | 892 ++++++++++----------- 1 file changed, 413 insertions(+), 479 deletions(-) diff --git a/drivers/staging/mrst-touchscreen/intel-mid-touch.c b/drivers/staging/mrst-touchscreen/intel-mid-touch.c index 6fed01ee82d..be7ba7b4759 100644 --- a/drivers/staging/mrst-touchscreen/intel-mid-touch.c +++ b/drivers/staging/mrst-touchscreen/intel-mid-touch.c @@ -1,5 +1,5 @@ /* - * intel_mid_touch.c - Intel MID Resistive Touch Screen Driver + * Intel MID Resistive Touch Screen Driver * * Copyright (C) 2008 Intel Corp * @@ -15,18 +15,15 @@ * General Public License for more details. * * You should have received a copy of the GNU General Public License along - * with this program; ifnot, write to the Free Software Foundation, Inc., + * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. * * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com) - * Ramesh Agarwal (ramesh.agarwal@intel.com) + * Ramesh Agarwal (ramesh.agarwal@intel.com) * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * * TODO: * review conversion of r/m/w sequences - * Replace interrupt mutex abuse - * Kill of mrstouchdevp pointer - * */ #include <linux/module.h> @@ -38,158 +35,104 @@ #include <linux/spi/spi.h> #include <linux/irq.h> #include <linux/delay.h> -#include <linux/kthread.h> #include <asm/intel_scu_ipc.h> - /* PMIC Interrupt registers */ -#define PMIC_REG_ID1 0x00 /*PMIC ID1 register */ +#define PMIC_REG_ID1 0x00 /* PMIC ID1 register */ /* PMIC Interrupt registers */ -#define PMIC_REG_INT 0x04 /*PMIC interrupt register */ -#define PMIC_REG_MINT 0x05 /*PMIC interrupt mask register */ +#define PMIC_REG_INT 0x04 /* PMIC interrupt register */ +#define PMIC_REG_MINT 0x05 /* PMIC interrupt mask register */ /* ADC Interrupt registers */ -#define PMIC_REG_ADCINT 0x5F /*ADC interrupt register */ -#define PMIC_REG_MADCINT 0x60 /*ADC interrupt mask register */ +#define PMIC_REG_ADCINT 0x5F /* ADC interrupt register */ +#define PMIC_REG_MADCINT 0x60 /* ADC interrupt mask register */ /* ADC Control registers */ -#define PMIC_REG_ADCCNTL1 0x61 /*ADC control register */ +#define PMIC_REG_ADCCNTL1 0x61 /* ADC control register */ /* ADC Channel Selection registers */ -#define PMICADDR0 0xA4 -#define END_OF_CHANNEL 0x1F +#define PMICADDR0 0xA4 +#define END_OF_CHANNEL 0x1F /* ADC Result register */ -#define PMIC_REG_ADCSNS0H 0x64 +#define PMIC_REG_ADCSNS0H 0x64 /* ADC channels for touch screen */ -#define MRST_TS_CHAN10 0xA /* Touch screen X+ connection */ -#define MRST_TS_CHAN11 0xB /* Touch screen X- connection */ -#define MRST_TS_CHAN12 0xC /* Touch screen Y+ connection */ -#define MRST_TS_CHAN13 0xD /* Touch screen Y- connection */ - -/* Touch screen coordinate constants */ -#define TOUCH_PRESSURE 50 -#define TOUCH_PRESSURE_FS 100 - -#define XMOVE_LIMIT 5 -#define YMOVE_LIMIT 5 -#define XYMOVE_CNT 3 - -#define MAX_10BIT ((1<<10)-1) +#define MRST_TS_CHAN10 0xA /* Touch screen X+ connection */ +#define MRST_TS_CHAN11 0xB /* Touch screen X- connection */ +#define MRST_TS_CHAN12 0xC /* Touch screen Y+ connection */ +#define MRST_TS_CHAN13 0xD /* Touch screen Y- connection */ /* Touch screen channel BIAS constants */ -#define XBIAS 0x20 -#define YBIAS 0x40 -#define ZBIAS 0x80 +#define MRST_XBIAS 0x20 +#define MRST_YBIAS 0x40 +#define MRST_ZBIAS 0x80 /* Touch screen coordinates */ -#define MIN_X 10 -#define MAX_X 1024 -#define MIN_Y 10 -#define MAX_Y 1024 -#define MIN_P 0 -#define MAX_P TOUCH_PRESSURE_FS - -#define WAIT_ADC_COMPLETION 10 +#define MRST_X_MIN 10 +#define MRST_X_MAX 1024 +#define MRST_X_FUZZ 5 +#define MRST_Y_MIN 10 +#define MRST_Y_MAX 1024 +#define MRST_Y_FUZZ 5 +#define MRST_PRESSURE_MIN 0 +#define MRST_PRESSURE_NOMINAL 50 +#define MRST_PRESSURE_MAX 100 + +#define WAIT_ADC_COMPLETION 10 /* msec */ /* PMIC ADC round robin delays */ -#define ADC_LOOP_DELAY0 0x0 /* Continuous loop */ -#define ADC_LOOP_DELAY1 0x1 /* 4.5 ms approximate */ +#define ADC_LOOP_DELAY0 0x0 /* Continuous loop */ +#define ADC_LOOP_DELAY1 0x1 /* 4.5 ms approximate */ /* PMIC Vendor Identifiers */ -#define PMIC_VENDOR_FS 0 /* PMIC vendor FreeScale */ -#define PMIC_VENDOR_MAXIM 1 /* PMIC vendor MAXIM */ -#define PMIC_VENDOR_NEC 2 /* PMIC vendor NEC */ -#define MRSTOUCH_MAX_CHANNELS 32 /* Maximum ADC channels */ +#define PMIC_VENDOR_FS 0 /* PMIC vendor FreeScale */ +#define PMIC_VENDOR_MAXIM 1 /* PMIC vendor MAXIM */ +#define PMIC_VENDOR_NEC 2 /* PMIC vendor NEC */ +#define MRSTOUCH_MAX_CHANNELS 32 /* Maximum ADC channels */ /* Touch screen device structure */ struct mrstouch_dev { - struct spi_device *spi; /* SPI device associated with touch screen */ - struct input_dev *input; /* input device for touchscreen*/ - char phys[32]; /* Device name */ - struct task_struct *pendet_thrd; /* PENDET interrupt handler */ - struct mutex lock; /* Sync between interrupt and PENDET handler */ - bool busy; /* Busy flag */ - u16 asr; /* Address selection register */ - int irq; /* Touch screen IRQ # */ - uint vendor; /* PMIC vendor */ - uint rev; /* PMIC revision */ - u16 x; /* X coordinate */ - u16 y; /* Y coordinate */ - bool pendown; /* PEN position */ -} ; - - -/* Global Pointer to Touch screen device */ -static struct mrstouch_dev *mrstouchdevp; + struct spi_device *spi; + struct input_dev *input; + char phys[32]; + u16 asr; /* Address selection register */ + int irq; + unsigned int vendor; /* PMIC vendor */ + unsigned int rev; /* PMIC revision */ + + int (*read_prepare)(struct mrstouch_dev *tsdev); + int (*read)(struct mrstouch_dev *tsdev, u16 *x, u16 *y, u16 *z); + int (*read_finish)(struct mrstouch_dev *tsdev); +}; -/* Utility to read PMIC ID */ -static int mrstouch_pmic_id(uint *vendor, uint *rev) + +/*************************** NEC and Maxim Interface ************************/ + +static int mrstouch_nec_adc_read_prepare(struct mrstouch_dev *tsdev) { + u16 reg; int err; - u8 r; - err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r); + err = intel_scu_ipc_ioread16(PMIC_REG_MADCINT, ®); if (err) return err; - *vendor = r & 0x7; - *rev = (r >> 3) & 0x7; + reg &= 0xDFFF; /* Disable pendet */ - return 0; + /* Set MADCINT and update ADCCNTL1 (next reg byte) */ + return intel_scu_ipc_iowrite16(PMIC_REG_MADCINT, reg); } /* - * Parse ADC channels to find end of the channel configured by other ADC user - * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels + * Enables PENDET interrupt. */ -static int mrstouch_chan_parse(struct mrstouch_dev *tsdev) -{ - int err, i, j, found; - u32 r32; - - found = -1; - - for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) { - if (found >= 0) - break; - - err = intel_scu_ipc_ioread32(PMICADDR0, &r32); - if (err) - return err; - - for (j = 0; j < 32; j+= 8) { - if (((r32 >> j) & 0xFF) == END_OF_CHANNEL) { - found = i; - break; - } - } - } - if (found < 0) - return 0; - - if (tsdev->vendor == PMIC_VENDOR_FS) { - if (found && found > (MRSTOUCH_MAX_CHANNELS - 18)) - return -ENOSPC; - } else { - if (found && found > (MRSTOUCH_MAX_CHANNELS - 4)) - return -ENOSPC; - } - return found; -} - -/* Utility to enable/disable pendet. - * pendet set to true enables PENDET interrupt - * pendet set to false disables PENDET interrupt - * Also clears RND mask bit -*/ -static int pendet_enable(struct mrstouch_dev *tsdev, bool pendet) +static int mrstouch_nec_adc_read_finish(struct mrstouch_dev *tsdev) { u16 reg; u8 r; - u8 pendet_enabled = 0; + u8 pendet_enabled; int retry = 0; int err; @@ -197,15 +140,12 @@ static int pendet_enable(struct mrstouch_dev *tsdev, bool pendet) if (err) return err; - if (pendet) { - reg &= ~0x0005; - reg |= 0x2000; /* Enable pendet */ - } else - reg &= 0xDFFF; /* Disable pendet */ + reg &= ~0x0005; + reg |= 0x2000; /* Enable pendet */ /* Set MADCINT and update ADCCNTL1 (next reg byte) */ err = intel_scu_ipc_iowrite16(PMIC_REG_MADCINT, reg); - if (!pendet || err) + if (err) return err; /* @@ -213,31 +153,36 @@ static int pendet_enable(struct mrstouch_dev *tsdev, bool pendet) * the PMIC register value is not updated. Retry few iterations * to enable pendet. */ + do { + err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r); + if (err) + return err; - err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r); - pendet_enabled = (r >> 5) & 0x01; + pendet_enabled = (r >> 5) & 0x01; - retry = 0; - while (!err && !pendet_enabled) { - retry++; - msleep(10); - err = intel_scu_ipc_iowrite8(PMIC_REG_ADCCNTL1, reg >> 8); - if (err) - break; - err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r); - if (err == 0) - pendet_enabled = (r >> 5) & 0x01; - if (retry >= 10) { - dev_err(&tsdev->spi->dev, "Touch screen disabled.\n"); - return -EIO; + if (!pendet_enabled) { + if (++retry >= 10) { + dev_err(&tsdev->spi->dev, + "Touch screen disabled.\n"); + return -EIO; + } + + msleep(10); + + err = intel_scu_ipc_iowrite8(PMIC_REG_ADCCNTL1, + reg >> 8); + if (err) + return err; } - } + } while (!pendet_enabled); + return 0; } -/* To read PMIC ADC touch screen result - * Reads ADC storage registers for higher 7 and lower 3 bits - * converts the two readings to single value and turns off gain bit +/* + * Reads PMIC ADC touch screen result + * Reads ADC storage registers for higher 7 and lower 3 bits and + * converts the two readings into a single value and turns off gain bit */ static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm) { @@ -269,187 +214,93 @@ static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm) return 0; } -/* To configure touch screen channels - * Writes touch screen channels to ADC address selection registers +/* + * Enables X, Y and Z bias values + * Enables YPYM for X channels and XPXM for Y channels */ -static int mrstouch_ts_chan_set(uint offset) +static int mrstouch_ts_bias_set(uint offset, uint bias) { int count; - u16 chan; - u16 reg[5]; - u8 data[5]; + u16 chan, start; + u16 reg[4]; + u8 data[4]; chan = PMICADDR0 + offset; + start = MRST_TS_CHAN10; + for (count = 0; count <= 3; count++) { reg[count] = chan++; - data[count] = MRST_TS_CHAN10 + count; - } - reg[count] = chan; - data[count] = END_OF_CHANNEL; - - return intel_scu_ipc_writev(reg, data, 5); -} - -/* Initialize ADC */ -static int mrstouch_adc_init(struct mrstouch_dev *tsdev) -{ - int err, start; - u8 ra, rm; - - err = mrstouch_pmic_id(&tsdev->vendor, &tsdev->rev); - if (err) { - dev_err(&tsdev->spi->dev, "Unable to read PMIC id\n"); - return err; - } - - start = mrstouch_chan_parse(tsdev); - if (start < 0) { - dev_err(&tsdev->spi->dev, "Unable to parse channels\n"); - return start; - } - - tsdev->asr = start; - - /* ADC power on, start, enable PENDET and set loop delay - * ADC loop delay is set to 4.5 ms approximately - * Loop delay more than this results in jitter in adc readings - * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET - * interrupt generation sometimes. - */ - - if (tsdev->vendor == PMIC_VENDOR_FS) { - ra = 0xE0 | ADC_LOOP_DELAY0; - rm = 0x5; - } else { - /* NEC and MAXIm not consistent with loop delay 0 */ - ra = 0xE0 | ADC_LOOP_DELAY1; - rm = 0x0; - - /* configure touch screen channels */ - err = mrstouch_ts_chan_set(tsdev->asr); - if (err) - return err; - } - err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7); - if (err == 0) - err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03); - return err; -} - -/* Reports x,y coordinates to event subsystem */ -static void mrstouch_report_xy(struct mrstouch_dev *tsdev, u16 x, u16 y, u16 z) -{ - int xdiff, ydiff; - - if (tsdev->pendown && z <= TOUCH_PRESSURE) { - /* Pen removed, report button release */ - input_report_key(tsdev->input, BTN_TOUCH, 0); - tsdev->pendown = false; - } - - xdiff = abs(x - tsdev->x); - ydiff = abs(y - tsdev->y); - - /* - if x and y values changes for XYMOVE_CNT readings it is considered - as stylus is moving. This is required to differentiate between stylus - movement and jitter - */ - if (x < MIN_X || x > MAX_X || y < MIN_Y || y > MAX_Y) { - /* Spurious values, release button if touched and return */ - if (tsdev->pendown) { - input_report_key(tsdev->input, BTN_TOUCH, 0); - tsdev->pendown = false; - } - return; - } else if (xdiff >= XMOVE_LIMIT || ydiff >= YMOVE_LIMIT) { - tsdev->x = x; - tsdev->y = y; - - input_report_abs(tsdev->input, ABS_X, x); - input_report_abs(tsdev->input, ABS_Y, y); - input_report_abs(tsdev->input, ABS_PRESSURE, z); - input_sync(tsdev->input); + data[count] = bias | (start + count); } - - if (!tsdev->pendown && z > TOUCH_PRESSURE) { - /* Pen touched, report button touch */ - input_report_key(tsdev->input, BTN_TOUCH, 1); - tsdev->pendown = true; - } -} - - -/* Utility to start ADC, used by freescale handler */ -static int pendet_mask(void) -{ - return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02); -} - -/* Utility to stop ADC, used by freescale handler */ -static int pendet_umask(void) -{ - return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02); + return intel_scu_ipc_writev(reg, data, 4); } -/* Utility to read ADC, used by freescale handler */ -static int mrstouch_pmic_fs_adc_read(struct mrstouch_dev *tsdev) +/* To read touch screen channel values */ +static int mrstouch_nec_adc_read(struct mrstouch_dev *tsdev, + u16 *x, u16 *y, u16 *z) { int err; - u16 x, y, z, result; - u16 reg[4]; - u8 data[4]; + u16 xm, ym, zm; - result = PMIC_REG_ADCSNS0H + tsdev->asr; + /* configure Y bias for X channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_YBIAS); + if (err) + goto ipc_error; - reg[0] = result + 4; - reg[1] = result + 5; - reg[2] = result + 16; - reg[3] = result + 17; + msleep(WAIT_ADC_COMPLETION); - err = intel_scu_ipc_readv(reg, data, 4); + /* read x+ and x- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, x, &xm); if (err) goto ipc_error; - x = data[0] << 3; /* Higher 7 bits */ - x |= data[1] & 0x7; /* Lower 3 bits */ - x &= 0x3FF; + /* configure x bias for y channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_XBIAS); + if (err) + goto ipc_error; - y = data[2] << 3; /* Higher 7 bits */ - y |= data[3] & 0x7; /* Lower 3 bits */ - y &= 0x3FF; + msleep(WAIT_ADC_COMPLETION); - /* Read Z value */ - reg[0] = result + 28; - reg[1] = result + 29; + /* read y+ and y- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, y, &ym); + if (err) + goto ipc_error; - err = intel_scu_ipc_readv(reg, data, 4); + /* configure z bias for x and y channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_ZBIAS); if (err) goto ipc_error; - z = data[0] << 3; /* Higher 7 bits */ - z |= data[1] & 0x7; /* Lower 3 bits */ - z &= 0x3FF; + msleep(WAIT_ADC_COMPLETION); + + /* read z+ and z- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, z, &zm); + if (err) + goto ipc_error; - mrstouch_report_xy(tsdev, x, y, z); return 0; ipc_error: - dev_err(&tsdev->spi->dev, "ipc error during fs_adc read\n"); + dev_err(&tsdev->spi->dev, "ipc error during adc read\n"); return err; } -/* To handle free scale pmic pendet interrupt */ -static int pmic0_pendet(void *dev_id) + +/*************************** Freescale Interface ************************/ + +static int mrstouch_fs_adc_read_prepare(struct mrstouch_dev *tsdev) { int err, count; u16 chan; - unsigned int touched; - struct mrstouch_dev *tsdev = (struct mrstouch_dev *)dev_id; u16 reg[5]; u8 data[5]; + /* Stop the ADC */ + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02); + if (err) + goto ipc_error; + chan = PMICADDR0 + tsdev->asr; /* Set X BIAS */ @@ -487,16 +338,65 @@ static int pmic0_pendet(void *dev_id) msleep(WAIT_ADC_COMPLETION); - /*Read touch screen channels till pen removed - * Freescale reports constant value of z for all points - * z is high when screen is not touched and low when touched - * Map high z value to not touched and low z value to pen touched - */ - touched = mrstouch_pmic_fs_adc_read(tsdev); - while (touched > TOUCH_PRESSURE) { - touched = mrstouch_pmic_fs_adc_read(tsdev); - msleep(WAIT_ADC_COMPLETION); - } + return 0; + +ipc_error: + dev_err(&tsdev->spi->dev, "ipc error during %s\n", __func__); + return err; +} + +static int mrstouch_fs_adc_read(struct mrstouch_dev *tsdev, + u16 *x, u16 *y, u16 *z) +{ + int err; + u16 result; + u16 reg[4]; + u8 data[4]; + + result = PMIC_REG_ADCSNS0H + tsdev->asr; + + reg[0] = result + 4; + reg[1] = result + 5; + reg[2] = result + 16; + reg[3] = result + 17; + + err = intel_scu_ipc_readv(reg, data, 4); + if (err) + goto ipc_error; + + *x = data[0] << 3; /* Higher 7 bits */ + *x |= data[1] & 0x7; /* Lower 3 bits */ + *x &= 0x3FF; + + *y = data[2] << 3; /* Higher 7 bits */ + *y |= data[3] & 0x7; /* Lower 3 bits */ + *y &= 0x3FF; + + /* Read Z value */ + reg[0] = result + 28; + reg[1] = result + 29; + + err = intel_scu_ipc_readv(reg, data, 4); + if (err) + goto ipc_error; + + *z = data[0] << 3; /* Higher 7 bits */ + *z |= data[1] & 0x7; /* Lower 3 bits */ + *z &= 0x3FF; + + return 0; + +ipc_error: + dev_err(&tsdev->spi->dev, "ipc error during %s\n", __func__); + return err; +} + +static int mrstouch_fs_adc_read_finish(struct mrstouch_dev *tsdev) +{ + int err, count; + u16 chan; + u16 reg[5]; + u8 data[5]; /* Clear all TS channels */ chan = PMICADDR0 + tsdev->asr; @@ -520,252 +420,296 @@ static int pmic0_pendet(void *dev_id) if (err) goto ipc_error; + /* Start ADC */ + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02); + if (err) + goto ipc_error; + return 0; ipc_error: - dev_err(&tsdev->spi->dev, "ipc error during pendet\n"); + dev_err(&tsdev->spi->dev, "ipc error during %s\n", __func__); return err; } - -/* To enable X, Y and Z bias values - * Enables YPYM for X channels and XPXM for Y channels - */ -static int mrstouch_ts_bias_set(uint offset, uint bias) +static void mrstouch_report_event(struct input_dev *input, + unsigned int x, unsigned int y, unsigned int z) { - int count; - u16 chan, start; - u16 reg[4]; - u8 data[4]; - - chan = PMICADDR0 + offset; - start = MRST_TS_CHAN10; - - for (count = 0; count <= 3; count++) { - reg[count] = chan++; - data[count] = bias | (start + count); + if (z > MRST_PRESSURE_NOMINAL) { + /* Pen touched, report button touch and coordinates */ + input_report_key(input, BTN_TOUCH, 1); + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + } else { + input_report_key(input, BTN_TOUCH, 0); } - return intel_scu_ipc_writev(reg, data, 4); + + input_report_abs(input, ABS_PRESSURE, z); + input_sync(input); } -/* To read touch screen channel values */ -static int mrstouch_adc_read(struct mrstouch_dev *tsdev) +/* PENDET interrupt handler */ +static irqreturn_t mrstouch_pendet_irq(int irq, void *dev_id) { - int err; - u16 xp, xm, yp, ym, zp, zm; + struct mrstouch_dev *tsdev = dev_id; + u16 x, y, z; - /* configure Y bias for X channels */ - err = mrstouch_ts_bias_set(tsdev->asr, YBIAS); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); + /* + * Should we lower thread priority? Probably not, since we are + * not spinning but sleeping... + */ - /* read x+ and x- channels */ - err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, &xp, &xm); - if (err) - goto ipc_error; + if (tsdev->read_prepare(tsdev)) + goto out; - /* configure x bias for y channels */ - err = mrstouch_ts_bias_set(tsdev->asr, XBIAS); - if (err) - goto ipc_error; + do { + if (tsdev->read(tsdev, &x, &y, &z)) + break; - msleep(WAIT_ADC_COMPLETION); + mrstouch_report_event(tsdev->input, x, y, z); + } while (z > MRST_PRESSURE_NOMINAL); - /* read y+ and y- channels */ - err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, &yp, &ym); - if (err) - goto ipc_error; + tsdev->read_finish(tsdev); - /* configure z bias for x and y channels */ - err = mrstouch_ts_bias_set(tsdev->asr, ZBIAS); - if (err) - goto ipc_error; +out: + return IRQ_HANDLED; +} - msleep(WAIT_ADC_COMPLETION); +/* Utility to read PMIC ID */ +static int __devinit mrstouch_read_pmic_id(uint *vendor, uint *rev) +{ + int err; + u8 r; - /* read z+ and z- channels */ - err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, &zp, &zm); + err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r); if (err) - goto ipc_error; - - mrstouch_report_xy(tsdev, xp, yp, zp); /* report x and y to eventX */ - - return zp; - -ipc_error: - dev_err(&tsdev->spi->dev, "ipc error during adc read\n"); - return err; -} + return err; -/* PENDET interrupt handler function for NEC and MAXIM */ -static void pmic12_pendet(void *data) -{ - unsigned int touched; - struct mrstouch_dev *tsdev = (struct mrstouch_dev *)data; + *vendor = r & 0x7; + *rev = (r >> 3) & 0x7; - /* read touch screen channels till pen removed */ - do { - touched = mrstouch_adc_read(tsdev); - } while (touched > TOUCH_PRESSURE); + return 0; } -/* Handler to process PENDET interrupt */ -int mrstouch_pendet(void *data) +/* + * Parse ADC channels to find end of the channel configured by other ADC user + * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels + */ +static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev) { - struct mrstouch_dev *tsdev = (struct mrstouch_dev *)data; - while (1) { - /* Wait for PENDET interrupt */ - if (mutex_lock_interruptible(&tsdev->lock)) { - msleep(WAIT_ADC_COMPLETION); - continue; - } + int err, i, j, found; + u32 r32; - if (tsdev->busy) - return 0; + found = -1; - tsdev->busy = true; + for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) { + if (found >= 0) + break; - if (tsdev->vendor == PMIC_VENDOR_NEC || - tsdev->vendor == PMIC_VENDOR_MAXIM) { - /* PENDET must be disabled in NEC before reading ADC */ - pendet_enable(tsdev,false); /* Disbale PENDET */ - pmic12_pendet(tsdev); - pendet_enable(tsdev, true); /*Enable PENDET */ - } else if (tsdev->vendor == PMIC_VENDOR_FS) { - pendet_umask(); /* Stop ADC */ - pmic0_pendet(tsdev); - pendet_mask(); /* Stop ADC */ - } else - dev_err(&tsdev->spi->dev, "Unsupported touchscreen: %d\n", - tsdev->vendor); + err = intel_scu_ipc_ioread32(PMICADDR0, &r32); + if (err) + return err; - tsdev->busy = false; + for (j = 0; j < 32; j+= 8) { + if (((r32 >> j) & 0xFF) == END_OF_CHANNEL) { + found = i; + break; + } + } + } + if (found < 0) + return 0; + if (tsdev->vendor == PMIC_VENDOR_FS) { + if (found && found > (MRSTOUCH_MAX_CHANNELS - 18)) + return -ENOSPC; + } else { + if (found && found > (MRSTOUCH_MAX_CHANNELS - 4)) + return -ENOSPC; } - return 0; + return found; } -/* PENDET interrupt handler */ -static irqreturn_t pendet_intr_handler(int irq, void *handle) + +/* + * Writes touch screen channels to ADC address selection registers + */ +static int __devinit mrstouch_ts_chan_set(uint offset) { - struct mrstouch_dev *tsdev = (struct mrstouch_dev *)handle; + int count; + u16 chan; + u16 reg[5]; + u8 data[5]; - mutex_unlock(&tsdev->lock); - return IRQ_HANDLED; + chan = PMICADDR0 + offset; + for (count = 0; count <= 3; count++) { + reg[count] = chan++; + data[count] = MRST_TS_CHAN10 + count; + } + reg[count] = chan; + data[count] = END_OF_CHANNEL; + + return intel_scu_ipc_writev(reg, data, 5); } -/* Intializes input device and registers with input subsystem */ -static int ts_input_dev_init(struct mrstouch_dev *tsdev, struct spi_device *spi) +/* Initialize ADC */ +static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev) { - int err = 0; + int err, start; + u8 ra, rm; - tsdev->input = input_allocate_device(); - if (!tsdev->input) { - dev_err(&tsdev->spi->dev, "Unable to allocate input device.\n"); - return -ENOMEM; + err = mrstouch_read_pmic_id(&tsdev->vendor, &tsdev->rev); + if (err) { + dev_err(&tsdev->spi->dev, "Unable to read PMIC id\n"); + return err; } - tsdev->input->name = "mrst_touchscreen"; - snprintf(tsdev->phys, sizeof(tsdev->phys), - "%s/input0", dev_name(&spi->dev)); - tsdev->input->phys = tsdev->phys; - tsdev->input->dev.parent = &spi->dev; + switch (tsdev->vendor) { + case PMIC_VENDOR_NEC: + case PMIC_VENDOR_MAXIM: + tsdev->read_prepare = mrstouch_nec_adc_read_prepare; + tsdev->read = mrstouch_nec_adc_read; + tsdev->read_finish = mrstouch_nec_adc_read_finish; + break; + + case PMIC_VENDOR_FS: + tsdev->read_prepare = mrstouch_fs_adc_read_prepare; + tsdev->read = mrstouch_fs_adc_read; + tsdev->read_finish = mrstouch_fs_adc_read_finish; + break; + + default: + dev_err(&tsdev->spi->dev, + "Unsupported touchscreen: %d\n", tsdev->vendor); + return -ENXIO; + } - tsdev->input->id.vendor = tsdev->vendor; - tsdev->input->id.version = tsdev->rev; + start = mrstouch_chan_parse(tsdev); + if (start < 0) { + dev_err(&tsdev->spi->dev, "Unable to parse channels\n"); + return start; + } - tsdev->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - tsdev->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + tsdev->asr = start; - input_set_abs_params(tsdev->input, ABS_X, MIN_X, MAX_X, 0, 0); - input_set_abs_params(tsdev->input, ABS_Y, MIN_Y, MAX_Y, 0, 0); - input_set_abs_params(tsdev->input, ABS_PRESSURE, MIN_P, MAX_P, 0, 0); + /* + * ADC power on, start, enable PENDET and set loop delay + * ADC loop delay is set to 4.5 ms approximately + * Loop delay more than this results in jitter in adc readings + * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET + * interrupt generation sometimes. + */ - err = input_register_device(tsdev->input); - if (err) { - dev_err(&tsdev->spi->dev, "unable to register input device\n"); - input_free_device(tsdev->input); - return err; + if (tsdev->vendor == PMIC_VENDOR_FS) { + ra = 0xE0 | ADC_LOOP_DELAY0; + rm = 0x5; + } else { + /* NEC and MAXIm not consistent with loop delay 0 */ + ra = 0xE0 | ADC_LOOP_DELAY1; + rm = 0x0; + + /* configure touch screen channels */ + err = mrstouch_ts_chan_set(tsdev->asr); + if (err) + return err; } - return 0; + err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7); + if (err) + return err; + + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03); + if (err) + return err; + + return 0; } + /* Probe function for touch screen driver */ -static int __devinit mrstouch_probe(struct spi_device *mrstouch_spi) +static int __devinit mrstouch_probe(struct spi_device *spi) { - int err; - unsigned int myirq; struct mrstouch_dev *tsdev; + struct input_dev *input; + int err; - mrstouchdevp = NULL; - myirq = mrstouch_spi->irq; - - if (!mrstouch_spi->irq) { - dev_err(&mrstouch_spi->dev, "no interrupt assigned\n"); + if (!spi->irq) { + dev_err(&spi->dev, "no interrupt assigned\n"); return -EINVAL; } tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL); - if (!tsdev) { - dev_err(&mrstouch_spi->dev, "unable to allocate memory\n"); - return -ENOMEM; + input = input_allocate_device(); + if (!tsdev || !input) { + dev_err(&spi->dev, "unable to allocate memory\n"); + err = -ENOMEM; + goto err_free_mem; } - tsdev->irq = myirq; - mrstouchdevp = tsdev; + tsdev->spi = spi; + tsdev->input = input; + tsdev->irq = spi->irq; + + snprintf(tsdev->phys, sizeof(tsdev->phys), + "%s/input0", dev_name(&spi->dev)); err = mrstouch_adc_init(tsdev); if (err) { - dev_err(&mrstouch_spi->dev, "ADC init failed\n"); - goto mrstouch_err_free_mem; + dev_err(&spi->dev, "ADC initialization failed\n"); + goto err_free_mem; } - dev_set_drvdata(&mrstouch_spi->dev, tsdev); - tsdev->spi = mrstouch_spi; + input->name = "mrst_touchscreen"; + input->phys = tsdev->phys; + input->dev.parent = &spi->dev; - err = ts_input_dev_init(tsdev, mrstouch_spi); - if (err) { - dev_err(&tsdev->spi->dev, "ts_input_dev_init failed"); - goto mrstouch_err_free_dev; - } + input->id.vendor = tsdev->vendor; + input->id.version = tsdev->rev; - mutex_init(&tsdev->lock); - mutex_lock(&tsdev->lock); + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - err = request_irq(myirq, pendet_intr_handler, - 0, "mrstouch", tsdev); + input_set_abs_params(tsdev->input, ABS_X, + MRST_X_MIN, MRST_X_MAX, MRST_X_FUZZ, 0); + input_set_abs_params(tsdev->input, ABS_Y, + MRST_Y_MIN, MRST_Y_MAX, MRST_Y_FUZZ, 0); + input_set_abs_params(tsdev->input, ABS_PRESSURE, + MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0); + + err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq, + 0, "mrstouch", tsdev); if (err) { dev_err(&tsdev->spi->dev, "unable to allocate irq\n"); - goto mrstouch_err_free_dev; + goto err_free_mem; } - tsdev->pendet_thrd = kthread_run(mrstouch_pendet, - (void *)tsdev, "pendet handler"); - if (IS_ERR(tsdev->pendet_thrd)) { - dev_err(&tsdev->spi->dev, "kthread_run failed\n"); - err = PTR_ERR(tsdev->pendet_thrd); - goto mrstouch_err_free_irq; + err = input_register_device(tsdev->input); + if (err) { + dev_err(&tsdev->spi->dev, "unable to register input device\n"); + goto err_free_irq; } + + spi_set_drvdata(spi, tsdev); return 0; -mrstouch_err_free_irq: - free_irq(myirq, tsdev); -mrstouch_err_free_dev: - input_unregister_device(tsdev->input); -mrstouch_err_free_mem: + +err_free_irq: + free_irq(tsdev->irq, tsdev); +err_free_mem: + input_free_device(input); kfree(tsdev); return err; } -static int mrstouch_remove(struct spi_device *spi) +static int __devexit mrstouch_remove(struct spi_device *spi) { - free_irq(mrstouchdevp->irq, mrstouchdevp); - if (mrstouchdevp->pendet_thrd) - kthread_stop(mrstouchdevp->pendet_thrd); - input_unregister_device(mrstouchdevp->input); - kfree(mrstouchdevp); + struct mrstouch_dev *tsdev = spi_get_drvdata(spi); + + free_irq(tsdev->irq, tsdev); + input_unregister_device(tsdev->input); + kfree(tsdev); + + spi_set_drvdata(spi, NULL); + return 0; } @@ -776,30 +720,20 @@ static struct spi_driver mrstouch_driver = { .owner = THIS_MODULE, }, .probe = mrstouch_probe, - .remove = mrstouch_remove, + .remove = __devexit_p(mrstouch_remove), }; -static int __init mrstouch_module_init(void) +static int __init mrstouch_init(void) { - int err; - - err = spi_register_driver(&mrstouch_driver); - if (err) { - printk(KERN_ERR "%s(%d)", "SPI PENDET failed", err); - return err;; - } - - return 0; + return spi_register_driver(&mrstouch_driver); } +module_init(mrstouch_init); -static void __exit mrstouch_module_exit(void) +static void __exit mrstouch_exit(void) { spi_unregister_driver(&mrstouch_driver); - return; } - -module_init(mrstouch_module_init); -module_exit(mrstouch_module_exit); +module_exit(mrstouch_exit); MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com"); MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver"); -- cgit v1.2.3-70-g09d2 From 36466a1b4585f9a24d5920ff90aa73e3803745cd Mon Sep 17 00:00:00 2001 From: Alek Du <alek.du@intel.com> Date: Tue, 31 Aug 2010 22:57:30 -0700 Subject: Staging: mrst-touchscreen - register platform interface AC: Reworked to merge with upstream input device work from Dmitry et al. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> --- drivers/staging/mrst-touchscreen/intel-mid-touch.c | 68 +++++++++++----------- 1 file changed, 35 insertions(+), 33 deletions(-) diff --git a/drivers/staging/mrst-touchscreen/intel-mid-touch.c b/drivers/staging/mrst-touchscreen/intel-mid-touch.c index be7ba7b4759..9333b9e0959 100644 --- a/drivers/staging/mrst-touchscreen/intel-mid-touch.c +++ b/drivers/staging/mrst-touchscreen/intel-mid-touch.c @@ -32,7 +32,8 @@ #include <linux/interrupt.h> #include <linux/err.h> #include <linux/param.h> -#include <linux/spi/spi.h> +#include <linux/slab.h> +#include <linux/platform_device.h> #include <linux/irq.h> #include <linux/delay.h> #include <asm/intel_scu_ipc.h> @@ -94,7 +95,7 @@ /* Touch screen device structure */ struct mrstouch_dev { - struct spi_device *spi; + struct device *dev; /* device associated with touch screen */ struct input_dev *input; char phys[32]; u16 asr; /* Address selection register */ @@ -162,7 +163,7 @@ static int mrstouch_nec_adc_read_finish(struct mrstouch_dev *tsdev) if (!pendet_enabled) { if (++retry >= 10) { - dev_err(&tsdev->spi->dev, + dev_err(tsdev->dev, "Touch screen disabled.\n"); return -EIO; } @@ -282,7 +283,7 @@ static int mrstouch_nec_adc_read(struct mrstouch_dev *tsdev, return 0; ipc_error: - dev_err(&tsdev->spi->dev, "ipc error during adc read\n"); + dev_err(tsdev->dev, "ipc error during adc read\n"); return err; } @@ -341,7 +342,7 @@ static int mrstouch_fs_adc_read_prepare(struct mrstouch_dev *tsdev) return 0; ipc_error: - dev_err(&tsdev->spi->dev, "ipc error during %s\n", __func__); + dev_err(tsdev->dev, "ipc error during %s\n", __func__); return err; } @@ -387,7 +388,7 @@ static int mrstouch_fs_adc_read(struct mrstouch_dev *tsdev, return 0; ipc_error: - dev_err(&tsdev->spi->dev, "ipc error during %s\n", __func__); + dev_err(tsdev->dev, "ipc error during %s\n", __func__); return err; } @@ -428,7 +429,7 @@ static int mrstouch_fs_adc_read_finish(struct mrstouch_dev *tsdev) return 0; ipc_error: - dev_err(&tsdev->spi->dev, "ipc error during %s\n", __func__); + dev_err(tsdev->dev, "ipc error during %s\n", __func__); return err; } @@ -560,7 +561,7 @@ static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev) err = mrstouch_read_pmic_id(&tsdev->vendor, &tsdev->rev); if (err) { - dev_err(&tsdev->spi->dev, "Unable to read PMIC id\n"); + dev_err(tsdev->dev, "Unable to read PMIC id\n"); return err; } @@ -579,14 +580,14 @@ static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev) break; default: - dev_err(&tsdev->spi->dev, + dev_err(tsdev->dev, "Unsupported touchscreen: %d\n", tsdev->vendor); return -ENXIO; } start = mrstouch_chan_parse(tsdev); if (start < 0) { - dev_err(&tsdev->spi->dev, "Unable to parse channels\n"); + dev_err(tsdev->dev, "Unable to parse channels\n"); return start; } @@ -627,41 +628,43 @@ static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev) /* Probe function for touch screen driver */ -static int __devinit mrstouch_probe(struct spi_device *spi) +static int __devinit mrstouch_probe(struct platform_device *pdev) { struct mrstouch_dev *tsdev; struct input_dev *input; int err; + int irq; - if (!spi->irq) { - dev_err(&spi->dev, "no interrupt assigned\n"); + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no interrupt assigned\n"); return -EINVAL; } tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL); input = input_allocate_device(); if (!tsdev || !input) { - dev_err(&spi->dev, "unable to allocate memory\n"); + dev_err(&pdev->dev, "unable to allocate memory\n"); err = -ENOMEM; goto err_free_mem; } - tsdev->spi = spi; + tsdev->dev = &pdev->dev; tsdev->input = input; - tsdev->irq = spi->irq; + tsdev->irq = irq; snprintf(tsdev->phys, sizeof(tsdev->phys), - "%s/input0", dev_name(&spi->dev)); + "%s/input0", dev_name(tsdev->dev)); err = mrstouch_adc_init(tsdev); if (err) { - dev_err(&spi->dev, "ADC initialization failed\n"); + dev_err(&pdev->dev, "ADC initialization failed\n"); goto err_free_mem; } input->name = "mrst_touchscreen"; input->phys = tsdev->phys; - input->dev.parent = &spi->dev; + input->dev.parent = tsdev->dev; input->id.vendor = tsdev->vendor; input->id.version = tsdev->rev; @@ -679,17 +682,17 @@ static int __devinit mrstouch_probe(struct spi_device *spi) err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq, 0, "mrstouch", tsdev); if (err) { - dev_err(&tsdev->spi->dev, "unable to allocate irq\n"); + dev_err(tsdev->dev, "unable to allocate irq\n"); goto err_free_mem; } err = input_register_device(tsdev->input); if (err) { - dev_err(&tsdev->spi->dev, "unable to register input device\n"); + dev_err(tsdev->dev, "unable to register input device\n"); goto err_free_irq; } - spi_set_drvdata(spi, tsdev); + platform_set_drvdata(pdev, tsdev); return 0; err_free_irq: @@ -700,38 +703,37 @@ err_free_mem: return err; } -static int __devexit mrstouch_remove(struct spi_device *spi) +static int __devexit mrstouch_remove(struct platform_device *pdev) { - struct mrstouch_dev *tsdev = spi_get_drvdata(spi); + struct mrstouch_dev *tsdev = platform_get_drvdata(pdev); free_irq(tsdev->irq, tsdev); input_unregister_device(tsdev->input); kfree(tsdev); - spi_set_drvdata(spi, NULL); + platform_set_drvdata(pdev, NULL); return 0; } -static struct spi_driver mrstouch_driver = { +static struct platform_driver mrstouch_driver = { .driver = { - .name = "pmic_touch", - .bus = &spi_bus_type, - .owner = THIS_MODULE, + .name = "pmic_touch", + .owner = THIS_MODULE, }, - .probe = mrstouch_probe, - .remove = __devexit_p(mrstouch_remove), + .probe = mrstouch_probe, + .remove = __devexit_p(mrstouch_remove), }; static int __init mrstouch_init(void) { - return spi_register_driver(&mrstouch_driver); + return platform_driver_register(&mrstouch_driver); } module_init(mrstouch_init); static void __exit mrstouch_exit(void) { - spi_unregister_driver(&mrstouch_driver); + platform_driver_unregister(&mrstouch_driver); } module_exit(mrstouch_exit); -- cgit v1.2.3-70-g09d2 From 409d568dc5f0dd179b5343630b65fdf082c14069 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven <arjan@linux.intel.com> Date: Tue, 31 Aug 2010 22:57:31 -0700 Subject: Staging: mrst-touchscreen - fix channel allocation The touch screen driver tries to find a range of free channels (which are an array of bytes), by scanning for the "end of used channel" marker. However it tries to be WAAAAY too smart and does 32 bit logic on 8 bit quantities, and in the process completely gets it wrong (repeatedly read the same register instead of incrementing in the loop, assuming that if any of the 4 bytes in the 32 byte quantity is free, all four are free, returning the channel number divided by 4 rather than the actual first free channel number) On the setting side, the same mistakes are made by and large; changed this to just use the byte SCU write functions.... With these fixes we go from a completely non detected touchscreen to something that appears to completely get detected. (after also fixing the ordering issue that Jacobs patch should solve) Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> --- drivers/staging/mrst-touchscreen/intel-mid-touch.c | 29 +++++++++------------- 1 file changed, 12 insertions(+), 17 deletions(-) diff --git a/drivers/staging/mrst-touchscreen/intel-mid-touch.c b/drivers/staging/mrst-touchscreen/intel-mid-touch.c index 9333b9e0959..2b9a7864ee7 100644 --- a/drivers/staging/mrst-touchscreen/intel-mid-touch.c +++ b/drivers/staging/mrst-touchscreen/intel-mid-touch.c @@ -498,8 +498,8 @@ static int __devinit mrstouch_read_pmic_id(uint *vendor, uint *rev) */ static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev) { - int err, i, j, found; - u32 r32; + int err, i, found; + u8 r8; found = -1; @@ -507,15 +507,13 @@ static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev) if (found >= 0) break; - err = intel_scu_ipc_ioread32(PMICADDR0, &r32); + err = intel_scu_ipc_ioread8(PMICADDR0 + i, &r8); if (err) return err; - for (j = 0; j < 32; j+= 8) { - if (((r32 >> j) & 0xFF) == END_OF_CHANNEL) { - found = i; - break; - } + if (r8 == END_OF_CHANNEL) { + found = i; + break; } } if (found < 0) @@ -537,20 +535,17 @@ static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev) */ static int __devinit mrstouch_ts_chan_set(uint offset) { - int count; u16 chan; - u16 reg[5]; - u8 data[5]; + + int ret, count; chan = PMICADDR0 + offset; for (count = 0; count <= 3; count++) { - reg[count] = chan++; - data[count] = MRST_TS_CHAN10 + count; + ret = intel_scu_ipc_iowrite8(chan++, MRST_TS_CHAN10 + count); + if (ret) + return ret; } - reg[count] = chan; - data[count] = END_OF_CHANNEL; - - return intel_scu_ipc_writev(reg, data, 5); + return intel_scu_ipc_iowrite8(chan++, END_OF_CHANNEL); } /* Initialize ADC */ -- cgit v1.2.3-70-g09d2 From a9cfa2537c503229eed029dcb9916ffd74695f56 Mon Sep 17 00:00:00 2001 From: Andy Ross <andy.ross@windriver.com> Date: Tue, 31 Aug 2010 23:00:41 -0700 Subject: Staging: mrst-touchscreen - simplify en/disable of interrupts for NEC Use 8 bit update commands instead of a 16 bit unaligned read/write pair which fails after the first few calls; the voodoo in the original doesn't seem to be required with this mechanism. Tested-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andy Ross <andy.ross@windriver.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> --- drivers/staging/mrst-touchscreen/intel-mid-touch.c | 60 ++-------------------- 1 file changed, 5 insertions(+), 55 deletions(-) diff --git a/drivers/staging/mrst-touchscreen/intel-mid-touch.c b/drivers/staging/mrst-touchscreen/intel-mid-touch.c index 2b9a7864ee7..c0307b22d86 100644 --- a/drivers/staging/mrst-touchscreen/intel-mid-touch.c +++ b/drivers/staging/mrst-touchscreen/intel-mid-touch.c @@ -113,17 +113,7 @@ struct mrstouch_dev { static int mrstouch_nec_adc_read_prepare(struct mrstouch_dev *tsdev) { - u16 reg; - int err; - - err = intel_scu_ipc_ioread16(PMIC_REG_MADCINT, ®); - if (err) - return err; - - reg &= 0xDFFF; /* Disable pendet */ - - /* Set MADCINT and update ADCCNTL1 (next reg byte) */ - return intel_scu_ipc_iowrite16(PMIC_REG_MADCINT, reg); + return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0, 0x20); } /* @@ -131,53 +121,13 @@ static int mrstouch_nec_adc_read_prepare(struct mrstouch_dev *tsdev) */ static int mrstouch_nec_adc_read_finish(struct mrstouch_dev *tsdev) { - u16 reg; - u8 r; - u8 pendet_enabled; - int retry = 0; int err; - err = intel_scu_ipc_ioread16(PMIC_REG_MADCINT, ®); - if (err) - return err; - - reg &= ~0x0005; - reg |= 0x2000; /* Enable pendet */ - - /* Set MADCINT and update ADCCNTL1 (next reg byte) */ - err = intel_scu_ipc_iowrite16(PMIC_REG_MADCINT, reg); - if (err) - return err; - - /* - * Sometimes even after the register write succeeds - * the PMIC register value is not updated. Retry few iterations - * to enable pendet. - */ - do { - err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r); - if (err) - return err; - - pendet_enabled = (r >> 5) & 0x01; + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x20, 0x20); + if (!err) + err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, 0, 0x05); - if (!pendet_enabled) { - if (++retry >= 10) { - dev_err(tsdev->dev, - "Touch screen disabled.\n"); - return -EIO; - } - - msleep(10); - - err = intel_scu_ipc_iowrite8(PMIC_REG_ADCCNTL1, - reg >> 8); - if (err) - return err; - } - } while (!pendet_enabled); - - return 0; + return err; } /* -- cgit v1.2.3-70-g09d2 From d4f5f937c3dfdea9f49c3cdeea8813b0d9f7715a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov <dmitry.torokhov@gmail.com> Date: Tue, 31 Aug 2010 23:00:52 -0700 Subject: Input: mrst-touchscreen - move out of staging The driver is in reasonable shape now so let's move it out of staging. Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> --- drivers/input/touchscreen/Kconfig | 12 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/intel-mid-touch.c | 687 +++++++++++++++++++++ drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/mrst-touchscreen/Kconfig | 7 - drivers/staging/mrst-touchscreen/Makefile | 3 - drivers/staging/mrst-touchscreen/TODO | 4 - drivers/staging/mrst-touchscreen/intel-mid-touch.c | 687 --------------------- 9 files changed, 700 insertions(+), 704 deletions(-) create mode 100644 drivers/input/touchscreen/intel-mid-touch.c delete mode 100644 drivers/staging/mrst-touchscreen/Kconfig delete mode 100644 drivers/staging/mrst-touchscreen/Makefile delete mode 100644 drivers/staging/mrst-touchscreen/TODO delete mode 100644 drivers/staging/mrst-touchscreen/intel-mid-touch.c diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 3b9d5e2105d..084f1982d38 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -237,6 +237,18 @@ config TOUCHSCREEN_INEXIO To compile this driver as a module, choose M here: the module will be called inexio. +config TOUCHSCREEN_INTEL_MID + tristate "Intel MID platform resistive touchscreen" + depends on INTEL_SCU_IPC + help + Say Y here if you have a Intel MID based touchscreen in + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called intel_mid_touch. + config TOUCHSCREEN_MK712 tristate "ICS MicroClock MK712 touchscreen" help diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 497964a7a21..e8b5cac8d7e 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o +obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c new file mode 100644 index 00000000000..c0307b22d86 --- /dev/null +++ b/drivers/input/touchscreen/intel-mid-touch.c @@ -0,0 +1,687 @@ +/* + * Intel MID Resistive Touch Screen Driver + * + * Copyright (C) 2008 Intel Corp + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com) + * Ramesh Agarwal (ramesh.agarwal@intel.com) + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * TODO: + * review conversion of r/m/w sequences + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/param.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <asm/intel_scu_ipc.h> + +/* PMIC Interrupt registers */ +#define PMIC_REG_ID1 0x00 /* PMIC ID1 register */ + +/* PMIC Interrupt registers */ +#define PMIC_REG_INT 0x04 /* PMIC interrupt register */ +#define PMIC_REG_MINT 0x05 /* PMIC interrupt mask register */ + +/* ADC Interrupt registers */ +#define PMIC_REG_ADCINT 0x5F /* ADC interrupt register */ +#define PMIC_REG_MADCINT 0x60 /* ADC interrupt mask register */ + +/* ADC Control registers */ +#define PMIC_REG_ADCCNTL1 0x61 /* ADC control register */ + +/* ADC Channel Selection registers */ +#define PMICADDR0 0xA4 +#define END_OF_CHANNEL 0x1F + +/* ADC Result register */ +#define PMIC_REG_ADCSNS0H 0x64 + +/* ADC channels for touch screen */ +#define MRST_TS_CHAN10 0xA /* Touch screen X+ connection */ +#define MRST_TS_CHAN11 0xB /* Touch screen X- connection */ +#define MRST_TS_CHAN12 0xC /* Touch screen Y+ connection */ +#define MRST_TS_CHAN13 0xD /* Touch screen Y- connection */ + +/* Touch screen channel BIAS constants */ +#define MRST_XBIAS 0x20 +#define MRST_YBIAS 0x40 +#define MRST_ZBIAS 0x80 + +/* Touch screen coordinates */ +#define MRST_X_MIN 10 +#define MRST_X_MAX 1024 +#define MRST_X_FUZZ 5 +#define MRST_Y_MIN 10 +#define MRST_Y_MAX 1024 +#define MRST_Y_FUZZ 5 +#define MRST_PRESSURE_MIN 0 +#define MRST_PRESSURE_NOMINAL 50 +#define MRST_PRESSURE_MAX 100 + +#define WAIT_ADC_COMPLETION 10 /* msec */ + +/* PMIC ADC round robin delays */ +#define ADC_LOOP_DELAY0 0x0 /* Continuous loop */ +#define ADC_LOOP_DELAY1 0x1 /* 4.5 ms approximate */ + +/* PMIC Vendor Identifiers */ +#define PMIC_VENDOR_FS 0 /* PMIC vendor FreeScale */ +#define PMIC_VENDOR_MAXIM 1 /* PMIC vendor MAXIM */ +#define PMIC_VENDOR_NEC 2 /* PMIC vendor NEC */ +#define MRSTOUCH_MAX_CHANNELS 32 /* Maximum ADC channels */ + +/* Touch screen device structure */ +struct mrstouch_dev { + struct device *dev; /* device associated with touch screen */ + struct input_dev *input; + char phys[32]; + u16 asr; /* Address selection register */ + int irq; + unsigned int vendor; /* PMIC vendor */ + unsigned int rev; /* PMIC revision */ + + int (*read_prepare)(struct mrstouch_dev *tsdev); + int (*read)(struct mrstouch_dev *tsdev, u16 *x, u16 *y, u16 *z); + int (*read_finish)(struct mrstouch_dev *tsdev); +}; + + +/*************************** NEC and Maxim Interface ************************/ + +static int mrstouch_nec_adc_read_prepare(struct mrstouch_dev *tsdev) +{ + return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0, 0x20); +} + +/* + * Enables PENDET interrupt. + */ +static int mrstouch_nec_adc_read_finish(struct mrstouch_dev *tsdev) +{ + int err; + + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x20, 0x20); + if (!err) + err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, 0, 0x05); + + return err; +} + +/* + * Reads PMIC ADC touch screen result + * Reads ADC storage registers for higher 7 and lower 3 bits and + * converts the two readings into a single value and turns off gain bit + */ +static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm) +{ + int err; + u16 result; + u32 res; + + result = PMIC_REG_ADCSNS0H + offset; + + if (chan == MRST_TS_CHAN12) + result += 4; + + err = intel_scu_ipc_ioread32(result, &res); + if (err) + return err; + + /* Mash the bits up */ + + *vp = (res & 0xFF) << 3; /* Highest 7 bits */ + *vp |= (res >> 8) & 0x07; /* Lower 3 bits */ + *vp &= 0x3FF; + + res >>= 16; + + *vm = (res & 0xFF) << 3; /* Highest 7 bits */ + *vm |= (res >> 8) & 0x07; /* Lower 3 bits */ + *vm &= 0x3FF; + + return 0; +} + +/* + * Enables X, Y and Z bias values + * Enables YPYM for X channels and XPXM for Y channels + */ +static int mrstouch_ts_bias_set(uint offset, uint bias) +{ + int count; + u16 chan, start; + u16 reg[4]; + u8 data[4]; + + chan = PMICADDR0 + offset; + start = MRST_TS_CHAN10; + + for (count = 0; count <= 3; count++) { + reg[count] = chan++; + data[count] = bias | (start + count); + } + + return intel_scu_ipc_writev(reg, data, 4); +} + +/* To read touch screen channel values */ +static int mrstouch_nec_adc_read(struct mrstouch_dev *tsdev, + u16 *x, u16 *y, u16 *z) +{ + int err; + u16 xm, ym, zm; + + /* configure Y bias for X channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_YBIAS); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* read x+ and x- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, x, &xm); + if (err) + goto ipc_error; + + /* configure x bias for y channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_XBIAS); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* read y+ and y- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, y, &ym); + if (err) + goto ipc_error; + + /* configure z bias for x and y channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_ZBIAS); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* read z+ and z- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, z, &zm); + if (err) + goto ipc_error; + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during adc read\n"); + return err; +} + + +/*************************** Freescale Interface ************************/ + +static int mrstouch_fs_adc_read_prepare(struct mrstouch_dev *tsdev) +{ + int err, count; + u16 chan; + u16 reg[5]; + u8 data[5]; + + /* Stop the ADC */ + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02); + if (err) + goto ipc_error; + + chan = PMICADDR0 + tsdev->asr; + + /* Set X BIAS */ + for (count = 0; count <= 3; count++) { + reg[count] = chan++; + data[count] = 0x2A; + } + reg[count] = chan++; /* Dummy */ + data[count] = 0; + + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* Set Y BIAS */ + for (count = 0; count <= 3; count++) { + reg[count] = chan++; + data[count] = 0x4A; + } + reg[count] = chan++; /* Dummy */ + data[count] = 0; + + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* Set Z BIAS */ + err = intel_scu_ipc_iowrite32(chan + 2, 0x8A8A8A8A); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during %s\n", __func__); + return err; +} + +static int mrstouch_fs_adc_read(struct mrstouch_dev *tsdev, + u16 *x, u16 *y, u16 *z) +{ + int err; + u16 result; + u16 reg[4]; + u8 data[4]; + + result = PMIC_REG_ADCSNS0H + tsdev->asr; + + reg[0] = result + 4; + reg[1] = result + 5; + reg[2] = result + 16; + reg[3] = result + 17; + + err = intel_scu_ipc_readv(reg, data, 4); + if (err) + goto ipc_error; + + *x = data[0] << 3; /* Higher 7 bits */ + *x |= data[1] & 0x7; /* Lower 3 bits */ + *x &= 0x3FF; + + *y = data[2] << 3; /* Higher 7 bits */ + *y |= data[3] & 0x7; /* Lower 3 bits */ + *y &= 0x3FF; + + /* Read Z value */ + reg[0] = result + 28; + reg[1] = result + 29; + + err = intel_scu_ipc_readv(reg, data, 4); + if (err) + goto ipc_error; + + *z = data[0] << 3; /* Higher 7 bits */ + *z |= data[1] & 0x7; /* Lower 3 bits */ + *z &= 0x3FF; + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during %s\n", __func__); + return err; +} + +static int mrstouch_fs_adc_read_finish(struct mrstouch_dev *tsdev) +{ + int err, count; + u16 chan; + u16 reg[5]; + u8 data[5]; + + /* Clear all TS channels */ + chan = PMICADDR0 + tsdev->asr; + for (count = 0; count <= 4; count++) { + reg[count] = chan++; + data[count] = 0; + } + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + for (count = 0; count <= 4; count++) { + reg[count] = chan++; + data[count] = 0; + } + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + err = intel_scu_ipc_iowrite32(chan + 2, 0x00000000); + if (err) + goto ipc_error; + + /* Start ADC */ + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02); + if (err) + goto ipc_error; + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during %s\n", __func__); + return err; +} + +static void mrstouch_report_event(struct input_dev *input, + unsigned int x, unsigned int y, unsigned int z) +{ + if (z > MRST_PRESSURE_NOMINAL) { + /* Pen touched, report button touch and coordinates */ + input_report_key(input, BTN_TOUCH, 1); + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + } else { + input_report_key(input, BTN_TOUCH, 0); + } + + input_report_abs(input, ABS_PRESSURE, z); + input_sync(input); +} + +/* PENDET interrupt handler */ +static irqreturn_t mrstouch_pendet_irq(int irq, void *dev_id) +{ + struct mrstouch_dev *tsdev = dev_id; + u16 x, y, z; + + /* + * Should we lower thread priority? Probably not, since we are + * not spinning but sleeping... + */ + + if (tsdev->read_prepare(tsdev)) + goto out; + + do { + if (tsdev->read(tsdev, &x, &y, &z)) + break; + + mrstouch_report_event(tsdev->input, x, y, z); + } while (z > MRST_PRESSURE_NOMINAL); + + tsdev->read_finish(tsdev); + +out: + return IRQ_HANDLED; +} + +/* Utility to read PMIC ID */ +static int __devinit mrstouch_read_pmic_id(uint *vendor, uint *rev) +{ + int err; + u8 r; + + err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r); + if (err) + return err; + + *vendor = r & 0x7; + *rev = (r >> 3) & 0x7; + + return 0; +} + +/* + * Parse ADC channels to find end of the channel configured by other ADC user + * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels + */ +static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev) +{ + int err, i, found; + u8 r8; + + found = -1; + + for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) { + if (found >= 0) + break; + + err = intel_scu_ipc_ioread8(PMICADDR0 + i, &r8); + if (err) + return err; + + if (r8 == END_OF_CHANNEL) { + found = i; + break; + } + } + if (found < 0) + return 0; + + if (tsdev->vendor == PMIC_VENDOR_FS) { + if (found && found > (MRSTOUCH_MAX_CHANNELS - 18)) + return -ENOSPC; + } else { + if (found && found > (MRSTOUCH_MAX_CHANNELS - 4)) + return -ENOSPC; + } + return found; +} + + +/* + * Writes touch screen channels to ADC address selection registers + */ +static int __devinit mrstouch_ts_chan_set(uint offset) +{ + u16 chan; + + int ret, count; + + chan = PMICADDR0 + offset; + for (count = 0; count <= 3; count++) { + ret = intel_scu_ipc_iowrite8(chan++, MRST_TS_CHAN10 + count); + if (ret) + return ret; + } + return intel_scu_ipc_iowrite8(chan++, END_OF_CHANNEL); +} + +/* Initialize ADC */ +static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev) +{ + int err, start; + u8 ra, rm; + + err = mrstouch_read_pmic_id(&tsdev->vendor, &tsdev->rev); + if (err) { + dev_err(tsdev->dev, "Unable to read PMIC id\n"); + return err; + } + + switch (tsdev->vendor) { + case PMIC_VENDOR_NEC: + case PMIC_VENDOR_MAXIM: + tsdev->read_prepare = mrstouch_nec_adc_read_prepare; + tsdev->read = mrstouch_nec_adc_read; + tsdev->read_finish = mrstouch_nec_adc_read_finish; + break; + + case PMIC_VENDOR_FS: + tsdev->read_prepare = mrstouch_fs_adc_read_prepare; + tsdev->read = mrstouch_fs_adc_read; + tsdev->read_finish = mrstouch_fs_adc_read_finish; + break; + + default: + dev_err(tsdev->dev, + "Unsupported touchscreen: %d\n", tsdev->vendor); + return -ENXIO; + } + + start = mrstouch_chan_parse(tsdev); + if (start < 0) { + dev_err(tsdev->dev, "Unable to parse channels\n"); + return start; + } + + tsdev->asr = start; + + /* + * ADC power on, start, enable PENDET and set loop delay + * ADC loop delay is set to 4.5 ms approximately + * Loop delay more than this results in jitter in adc readings + * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET + * interrupt generation sometimes. + */ + + if (tsdev->vendor == PMIC_VENDOR_FS) { + ra = 0xE0 | ADC_LOOP_DELAY0; + rm = 0x5; + } else { + /* NEC and MAXIm not consistent with loop delay 0 */ + ra = 0xE0 | ADC_LOOP_DELAY1; + rm = 0x0; + + /* configure touch screen channels */ + err = mrstouch_ts_chan_set(tsdev->asr); + if (err) + return err; + } + + err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7); + if (err) + return err; + + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03); + if (err) + return err; + + return 0; +} + + +/* Probe function for touch screen driver */ +static int __devinit mrstouch_probe(struct platform_device *pdev) +{ + struct mrstouch_dev *tsdev; + struct input_dev *input; + int err; + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no interrupt assigned\n"); + return -EINVAL; + } + + tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL); + input = input_allocate_device(); + if (!tsdev || !input) { + dev_err(&pdev->dev, "unable to allocate memory\n"); + err = -ENOMEM; + goto err_free_mem; + } + + tsdev->dev = &pdev->dev; + tsdev->input = input; + tsdev->irq = irq; + + snprintf(tsdev->phys, sizeof(tsdev->phys), + "%s/input0", dev_name(tsdev->dev)); + + err = mrstouch_adc_init(tsdev); + if (err) { + dev_err(&pdev->dev, "ADC initialization failed\n"); + goto err_free_mem; + } + + input->name = "mrst_touchscreen"; + input->phys = tsdev->phys; + input->dev.parent = tsdev->dev; + + input->id.vendor = tsdev->vendor; + input->id.version = tsdev->rev; + + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(tsdev->input, ABS_X, + MRST_X_MIN, MRST_X_MAX, MRST_X_FUZZ, 0); + input_set_abs_params(tsdev->input, ABS_Y, + MRST_Y_MIN, MRST_Y_MAX, MRST_Y_FUZZ, 0); + input_set_abs_params(tsdev->input, ABS_PRESSURE, + MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0); + + err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq, + 0, "mrstouch", tsdev); + if (err) { + dev_err(tsdev->dev, "unable to allocate irq\n"); + goto err_free_mem; + } + + err = input_register_device(tsdev->input); + if (err) { + dev_err(tsdev->dev, "unable to register input device\n"); + goto err_free_irq; + } + + platform_set_drvdata(pdev, tsdev); + return 0; + +err_free_irq: + free_irq(tsdev->irq, tsdev); +err_free_mem: + input_free_device(input); + kfree(tsdev); + return err; +} + +static int __devexit mrstouch_remove(struct platform_device *pdev) +{ + struct mrstouch_dev *tsdev = platform_get_drvdata(pdev); + + free_irq(tsdev->irq, tsdev); + input_unregister_device(tsdev->input); + kfree(tsdev); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver mrstouch_driver = { + .driver = { + .name = "pmic_touch", + .owner = THIS_MODULE, + }, + .probe = mrstouch_probe, + .remove = __devexit_p(mrstouch_remove), +}; + +static int __init mrstouch_init(void) +{ + return platform_driver_register(&mrstouch_driver); +} +module_init(mrstouch_init); + +static void __exit mrstouch_exit(void) +{ + platform_driver_unregister(&mrstouch_driver); +} +module_exit(mrstouch_exit); + +MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com"); +MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 984a7544071..74dc176a228 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -143,8 +143,6 @@ source "drivers/staging/adis16255/Kconfig" source "drivers/staging/xgifb/Kconfig" -source "drivers/staging/mrst-touchscreen/Kconfig" - source "drivers/staging/msm/Kconfig" endif # !STAGING_EXCLUDE_BUILD diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index d071bac73ac..cbd613cc6d3 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -52,5 +52,4 @@ obj-$(CONFIG_CXT1E1) += cxt1e1/ obj-$(CONFIG_TI_ST) += ti-st/ obj-$(CONFIG_ADIS16255) += adis16255/ obj-$(CONFIG_FB_XGI) += xgifb/ -obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += mrst-touchscreen/ obj-$(CONFIG_MSM_STAGING) += msm/ diff --git a/drivers/staging/mrst-touchscreen/Kconfig b/drivers/staging/mrst-touchscreen/Kconfig deleted file mode 100644 index 775d740bb61..00000000000 --- a/drivers/staging/mrst-touchscreen/Kconfig +++ /dev/null @@ -1,7 +0,0 @@ -config TOUCHSCREEN_INTEL_MID - tristate "Intel MID platform resistive touchscreen" - depends on INTEL_SCU_IPC && INPUT_TOUCHSCREEN - default y - help - Say Y here if you have a Intel MID based touchscreen - If unsure, say N. diff --git a/drivers/staging/mrst-touchscreen/Makefile b/drivers/staging/mrst-touchscreen/Makefile deleted file mode 100644 index 155f58b57db..00000000000 --- a/drivers/staging/mrst-touchscreen/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) := intel-mid-touch.o - - diff --git a/drivers/staging/mrst-touchscreen/TODO b/drivers/staging/mrst-touchscreen/TODO deleted file mode 100644 index 84aa6958d0a..00000000000 --- a/drivers/staging/mrst-touchscreen/TODO +++ /dev/null @@ -1,4 +0,0 @@ -- Move the driver to not think it is SPI (requires fixing some of the SFI - and firmware side) -- Fix mutex in IRQ stuff - threaded IRQ ? - diff --git a/drivers/staging/mrst-touchscreen/intel-mid-touch.c b/drivers/staging/mrst-touchscreen/intel-mid-touch.c deleted file mode 100644 index c0307b22d86..00000000000 --- a/drivers/staging/mrst-touchscreen/intel-mid-touch.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * Intel MID Resistive Touch Screen Driver - * - * Copyright (C) 2008 Intel Corp - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com) - * Ramesh Agarwal (ramesh.agarwal@intel.com) - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * TODO: - * review conversion of r/m/w sequences - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/param.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/delay.h> -#include <asm/intel_scu_ipc.h> - -/* PMIC Interrupt registers */ -#define PMIC_REG_ID1 0x00 /* PMIC ID1 register */ - -/* PMIC Interrupt registers */ -#define PMIC_REG_INT 0x04 /* PMIC interrupt register */ -#define PMIC_REG_MINT 0x05 /* PMIC interrupt mask register */ - -/* ADC Interrupt registers */ -#define PMIC_REG_ADCINT 0x5F /* ADC interrupt register */ -#define PMIC_REG_MADCINT 0x60 /* ADC interrupt mask register */ - -/* ADC Control registers */ -#define PMIC_REG_ADCCNTL1 0x61 /* ADC control register */ - -/* ADC Channel Selection registers */ -#define PMICADDR0 0xA4 -#define END_OF_CHANNEL 0x1F - -/* ADC Result register */ -#define PMIC_REG_ADCSNS0H 0x64 - -/* ADC channels for touch screen */ -#define MRST_TS_CHAN10 0xA /* Touch screen X+ connection */ -#define MRST_TS_CHAN11 0xB /* Touch screen X- connection */ -#define MRST_TS_CHAN12 0xC /* Touch screen Y+ connection */ -#define MRST_TS_CHAN13 0xD /* Touch screen Y- connection */ - -/* Touch screen channel BIAS constants */ -#define MRST_XBIAS 0x20 -#define MRST_YBIAS 0x40 -#define MRST_ZBIAS 0x80 - -/* Touch screen coordinates */ -#define MRST_X_MIN 10 -#define MRST_X_MAX 1024 -#define MRST_X_FUZZ 5 -#define MRST_Y_MIN 10 -#define MRST_Y_MAX 1024 -#define MRST_Y_FUZZ 5 -#define MRST_PRESSURE_MIN 0 -#define MRST_PRESSURE_NOMINAL 50 -#define MRST_PRESSURE_MAX 100 - -#define WAIT_ADC_COMPLETION 10 /* msec */ - -/* PMIC ADC round robin delays */ -#define ADC_LOOP_DELAY0 0x0 /* Continuous loop */ -#define ADC_LOOP_DELAY1 0x1 /* 4.5 ms approximate */ - -/* PMIC Vendor Identifiers */ -#define PMIC_VENDOR_FS 0 /* PMIC vendor FreeScale */ -#define PMIC_VENDOR_MAXIM 1 /* PMIC vendor MAXIM */ -#define PMIC_VENDOR_NEC 2 /* PMIC vendor NEC */ -#define MRSTOUCH_MAX_CHANNELS 32 /* Maximum ADC channels */ - -/* Touch screen device structure */ -struct mrstouch_dev { - struct device *dev; /* device associated with touch screen */ - struct input_dev *input; - char phys[32]; - u16 asr; /* Address selection register */ - int irq; - unsigned int vendor; /* PMIC vendor */ - unsigned int rev; /* PMIC revision */ - - int (*read_prepare)(struct mrstouch_dev *tsdev); - int (*read)(struct mrstouch_dev *tsdev, u16 *x, u16 *y, u16 *z); - int (*read_finish)(struct mrstouch_dev *tsdev); -}; - - -/*************************** NEC and Maxim Interface ************************/ - -static int mrstouch_nec_adc_read_prepare(struct mrstouch_dev *tsdev) -{ - return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0, 0x20); -} - -/* - * Enables PENDET interrupt. - */ -static int mrstouch_nec_adc_read_finish(struct mrstouch_dev *tsdev) -{ - int err; - - err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x20, 0x20); - if (!err) - err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, 0, 0x05); - - return err; -} - -/* - * Reads PMIC ADC touch screen result - * Reads ADC storage registers for higher 7 and lower 3 bits and - * converts the two readings into a single value and turns off gain bit - */ -static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm) -{ - int err; - u16 result; - u32 res; - - result = PMIC_REG_ADCSNS0H + offset; - - if (chan == MRST_TS_CHAN12) - result += 4; - - err = intel_scu_ipc_ioread32(result, &res); - if (err) - return err; - - /* Mash the bits up */ - - *vp = (res & 0xFF) << 3; /* Highest 7 bits */ - *vp |= (res >> 8) & 0x07; /* Lower 3 bits */ - *vp &= 0x3FF; - - res >>= 16; - - *vm = (res & 0xFF) << 3; /* Highest 7 bits */ - *vm |= (res >> 8) & 0x07; /* Lower 3 bits */ - *vm &= 0x3FF; - - return 0; -} - -/* - * Enables X, Y and Z bias values - * Enables YPYM for X channels and XPXM for Y channels - */ -static int mrstouch_ts_bias_set(uint offset, uint bias) -{ - int count; - u16 chan, start; - u16 reg[4]; - u8 data[4]; - - chan = PMICADDR0 + offset; - start = MRST_TS_CHAN10; - - for (count = 0; count <= 3; count++) { - reg[count] = chan++; - data[count] = bias | (start + count); - } - - return intel_scu_ipc_writev(reg, data, 4); -} - -/* To read touch screen channel values */ -static int mrstouch_nec_adc_read(struct mrstouch_dev *tsdev, - u16 *x, u16 *y, u16 *z) -{ - int err; - u16 xm, ym, zm; - - /* configure Y bias for X channels */ - err = mrstouch_ts_bias_set(tsdev->asr, MRST_YBIAS); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - /* read x+ and x- channels */ - err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, x, &xm); - if (err) - goto ipc_error; - - /* configure x bias for y channels */ - err = mrstouch_ts_bias_set(tsdev->asr, MRST_XBIAS); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - /* read y+ and y- channels */ - err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, y, &ym); - if (err) - goto ipc_error; - - /* configure z bias for x and y channels */ - err = mrstouch_ts_bias_set(tsdev->asr, MRST_ZBIAS); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - /* read z+ and z- channels */ - err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, z, &zm); - if (err) - goto ipc_error; - - return 0; - -ipc_error: - dev_err(tsdev->dev, "ipc error during adc read\n"); - return err; -} - - -/*************************** Freescale Interface ************************/ - -static int mrstouch_fs_adc_read_prepare(struct mrstouch_dev *tsdev) -{ - int err, count; - u16 chan; - u16 reg[5]; - u8 data[5]; - - /* Stop the ADC */ - err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02); - if (err) - goto ipc_error; - - chan = PMICADDR0 + tsdev->asr; - - /* Set X BIAS */ - for (count = 0; count <= 3; count++) { - reg[count] = chan++; - data[count] = 0x2A; - } - reg[count] = chan++; /* Dummy */ - data[count] = 0; - - err = intel_scu_ipc_writev(reg, data, 5); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - /* Set Y BIAS */ - for (count = 0; count <= 3; count++) { - reg[count] = chan++; - data[count] = 0x4A; - } - reg[count] = chan++; /* Dummy */ - data[count] = 0; - - err = intel_scu_ipc_writev(reg, data, 5); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - /* Set Z BIAS */ - err = intel_scu_ipc_iowrite32(chan + 2, 0x8A8A8A8A); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - return 0; - -ipc_error: - dev_err(tsdev->dev, "ipc error during %s\n", __func__); - return err; -} - -static int mrstouch_fs_adc_read(struct mrstouch_dev *tsdev, - u16 *x, u16 *y, u16 *z) -{ - int err; - u16 result; - u16 reg[4]; - u8 data[4]; - - result = PMIC_REG_ADCSNS0H + tsdev->asr; - - reg[0] = result + 4; - reg[1] = result + 5; - reg[2] = result + 16; - reg[3] = result + 17; - - err = intel_scu_ipc_readv(reg, data, 4); - if (err) - goto ipc_error; - - *x = data[0] << 3; /* Higher 7 bits */ - *x |= data[1] & 0x7; /* Lower 3 bits */ - *x &= 0x3FF; - - *y = data[2] << 3; /* Higher 7 bits */ - *y |= data[3] & 0x7; /* Lower 3 bits */ - *y &= 0x3FF; - - /* Read Z value */ - reg[0] = result + 28; - reg[1] = result + 29; - - err = intel_scu_ipc_readv(reg, data, 4); - if (err) - goto ipc_error; - - *z = data[0] << 3; /* Higher 7 bits */ - *z |= data[1] & 0x7; /* Lower 3 bits */ - *z &= 0x3FF; - - return 0; - -ipc_error: - dev_err(tsdev->dev, "ipc error during %s\n", __func__); - return err; -} - -static int mrstouch_fs_adc_read_finish(struct mrstouch_dev *tsdev) -{ - int err, count; - u16 chan; - u16 reg[5]; - u8 data[5]; - - /* Clear all TS channels */ - chan = PMICADDR0 + tsdev->asr; - for (count = 0; count <= 4; count++) { - reg[count] = chan++; - data[count] = 0; - } - err = intel_scu_ipc_writev(reg, data, 5); - if (err) - goto ipc_error; - - for (count = 0; count <= 4; count++) { - reg[count] = chan++; - data[count] = 0; - } - err = intel_scu_ipc_writev(reg, data, 5); - if (err) - goto ipc_error; - - err = intel_scu_ipc_iowrite32(chan + 2, 0x00000000); - if (err) - goto ipc_error; - - /* Start ADC */ - err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02); - if (err) - goto ipc_error; - - return 0; - -ipc_error: - dev_err(tsdev->dev, "ipc error during %s\n", __func__); - return err; -} - -static void mrstouch_report_event(struct input_dev *input, - unsigned int x, unsigned int y, unsigned int z) -{ - if (z > MRST_PRESSURE_NOMINAL) { - /* Pen touched, report button touch and coordinates */ - input_report_key(input, BTN_TOUCH, 1); - input_report_abs(input, ABS_X, x); - input_report_abs(input, ABS_Y, y); - } else { - input_report_key(input, BTN_TOUCH, 0); - } - - input_report_abs(input, ABS_PRESSURE, z); - input_sync(input); -} - -/* PENDET interrupt handler */ -static irqreturn_t mrstouch_pendet_irq(int irq, void *dev_id) -{ - struct mrstouch_dev *tsdev = dev_id; - u16 x, y, z; - - /* - * Should we lower thread priority? Probably not, since we are - * not spinning but sleeping... - */ - - if (tsdev->read_prepare(tsdev)) - goto out; - - do { - if (tsdev->read(tsdev, &x, &y, &z)) - break; - - mrstouch_report_event(tsdev->input, x, y, z); - } while (z > MRST_PRESSURE_NOMINAL); - - tsdev->read_finish(tsdev); - -out: - return IRQ_HANDLED; -} - -/* Utility to read PMIC ID */ -static int __devinit mrstouch_read_pmic_id(uint *vendor, uint *rev) -{ - int err; - u8 r; - - err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r); - if (err) - return err; - - *vendor = r & 0x7; - *rev = (r >> 3) & 0x7; - - return 0; -} - -/* - * Parse ADC channels to find end of the channel configured by other ADC user - * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels - */ -static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev) -{ - int err, i, found; - u8 r8; - - found = -1; - - for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) { - if (found >= 0) - break; - - err = intel_scu_ipc_ioread8(PMICADDR0 + i, &r8); - if (err) - return err; - - if (r8 == END_OF_CHANNEL) { - found = i; - break; - } - } - if (found < 0) - return 0; - - if (tsdev->vendor == PMIC_VENDOR_FS) { - if (found && found > (MRSTOUCH_MAX_CHANNELS - 18)) - return -ENOSPC; - } else { - if (found && found > (MRSTOUCH_MAX_CHANNELS - 4)) - return -ENOSPC; - } - return found; -} - - -/* - * Writes touch screen channels to ADC address selection registers - */ -static int __devinit mrstouch_ts_chan_set(uint offset) -{ - u16 chan; - - int ret, count; - - chan = PMICADDR0 + offset; - for (count = 0; count <= 3; count++) { - ret = intel_scu_ipc_iowrite8(chan++, MRST_TS_CHAN10 + count); - if (ret) - return ret; - } - return intel_scu_ipc_iowrite8(chan++, END_OF_CHANNEL); -} - -/* Initialize ADC */ -static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev) -{ - int err, start; - u8 ra, rm; - - err = mrstouch_read_pmic_id(&tsdev->vendor, &tsdev->rev); - if (err) { - dev_err(tsdev->dev, "Unable to read PMIC id\n"); - return err; - } - - switch (tsdev->vendor) { - case PMIC_VENDOR_NEC: - case PMIC_VENDOR_MAXIM: - tsdev->read_prepare = mrstouch_nec_adc_read_prepare; - tsdev->read = mrstouch_nec_adc_read; - tsdev->read_finish = mrstouch_nec_adc_read_finish; - break; - - case PMIC_VENDOR_FS: - tsdev->read_prepare = mrstouch_fs_adc_read_prepare; - tsdev->read = mrstouch_fs_adc_read; - tsdev->read_finish = mrstouch_fs_adc_read_finish; - break; - - default: - dev_err(tsdev->dev, - "Unsupported touchscreen: %d\n", tsdev->vendor); - return -ENXIO; - } - - start = mrstouch_chan_parse(tsdev); - if (start < 0) { - dev_err(tsdev->dev, "Unable to parse channels\n"); - return start; - } - - tsdev->asr = start; - - /* - * ADC power on, start, enable PENDET and set loop delay - * ADC loop delay is set to 4.5 ms approximately - * Loop delay more than this results in jitter in adc readings - * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET - * interrupt generation sometimes. - */ - - if (tsdev->vendor == PMIC_VENDOR_FS) { - ra = 0xE0 | ADC_LOOP_DELAY0; - rm = 0x5; - } else { - /* NEC and MAXIm not consistent with loop delay 0 */ - ra = 0xE0 | ADC_LOOP_DELAY1; - rm = 0x0; - - /* configure touch screen channels */ - err = mrstouch_ts_chan_set(tsdev->asr); - if (err) - return err; - } - - err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7); - if (err) - return err; - - err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03); - if (err) - return err; - - return 0; -} - - -/* Probe function for touch screen driver */ -static int __devinit mrstouch_probe(struct platform_device *pdev) -{ - struct mrstouch_dev *tsdev; - struct input_dev *input; - int err; - int irq; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "no interrupt assigned\n"); - return -EINVAL; - } - - tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL); - input = input_allocate_device(); - if (!tsdev || !input) { - dev_err(&pdev->dev, "unable to allocate memory\n"); - err = -ENOMEM; - goto err_free_mem; - } - - tsdev->dev = &pdev->dev; - tsdev->input = input; - tsdev->irq = irq; - - snprintf(tsdev->phys, sizeof(tsdev->phys), - "%s/input0", dev_name(tsdev->dev)); - - err = mrstouch_adc_init(tsdev); - if (err) { - dev_err(&pdev->dev, "ADC initialization failed\n"); - goto err_free_mem; - } - - input->name = "mrst_touchscreen"; - input->phys = tsdev->phys; - input->dev.parent = tsdev->dev; - - input->id.vendor = tsdev->vendor; - input->id.version = tsdev->rev; - - input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - - input_set_abs_params(tsdev->input, ABS_X, - MRST_X_MIN, MRST_X_MAX, MRST_X_FUZZ, 0); - input_set_abs_params(tsdev->input, ABS_Y, - MRST_Y_MIN, MRST_Y_MAX, MRST_Y_FUZZ, 0); - input_set_abs_params(tsdev->input, ABS_PRESSURE, - MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0); - - err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq, - 0, "mrstouch", tsdev); - if (err) { - dev_err(tsdev->dev, "unable to allocate irq\n"); - goto err_free_mem; - } - - err = input_register_device(tsdev->input); - if (err) { - dev_err(tsdev->dev, "unable to register input device\n"); - goto err_free_irq; - } - - platform_set_drvdata(pdev, tsdev); - return 0; - -err_free_irq: - free_irq(tsdev->irq, tsdev); -err_free_mem: - input_free_device(input); - kfree(tsdev); - return err; -} - -static int __devexit mrstouch_remove(struct platform_device *pdev) -{ - struct mrstouch_dev *tsdev = platform_get_drvdata(pdev); - - free_irq(tsdev->irq, tsdev); - input_unregister_device(tsdev->input); - kfree(tsdev); - - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static struct platform_driver mrstouch_driver = { - .driver = { - .name = "pmic_touch", - .owner = THIS_MODULE, - }, - .probe = mrstouch_probe, - .remove = __devexit_p(mrstouch_remove), -}; - -static int __init mrstouch_init(void) -{ - return platform_driver_register(&mrstouch_driver); -} -module_init(mrstouch_init); - -static void __exit mrstouch_exit(void) -{ - platform_driver_unregister(&mrstouch_driver); -} -module_exit(mrstouch_exit); - -MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com"); -MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver"); -MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2