From ae3725716edf5a73ab66831c0808542c21fa3bba Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 21 May 2012 12:01:11 -0700
Subject: usb: gadget: omap_udc: Remove omap2 support

There are no active users of this code for omap2 as
the boards in use have either TUSB or MUSB controller.

While at it, also fix warnings related to uninitialized
dc_clk and hhc_clk.

Cc: linux-usb@vger.kernel.org
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/omap_udc.c | 113 +++++++++---------------------------------
 1 file changed, 23 insertions(+), 90 deletions(-)

diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 7ba32469c5b..24d81dcb7b4 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -61,9 +61,6 @@
 
 #define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
 
-#define OMAP2_DMA_CH(ch)	(((ch) - 1) << 1)
-#define OMAP24XX_DMA(name, ch)	(OMAP24XX_DMA_##name + OMAP2_DMA_CH(ch))
-
 /*
  * The OMAP UDC needs _very_ early endpoint setup:  before enabling the
  * D+ pullup to allow enumeration.  That's too early for the gadget
@@ -536,12 +533,8 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
 				: OMAP_DMA_SYNC_ELEMENT;
 	int		dma_trigger = 0;
 
-	if (cpu_is_omap24xx())
-		dma_trigger = OMAP24XX_DMA(USB_W2FC_TX0, ep->dma_channel);
-
 	/* measure length in either bytes or packets */
 	if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC)
-			|| (cpu_is_omap24xx() && length < ep->maxpacket)
 			|| (cpu_is_omap15xx() && length < ep->maxpacket)) {
 		txdma_ctrl = UDC_TXN_EOT | length;
 		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
@@ -600,28 +593,14 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
 	int dma_trigger = 0;
 	u16 w;
 
-	if (cpu_is_omap24xx())
-		dma_trigger = OMAP24XX_DMA(USB_W2FC_RX0, ep->dma_channel);
-
-	/* NOTE:  we filtered out "short reads" before, so we know
-	 * the buffer has only whole numbers of packets.
-	 * except MODE SELECT(6) sent the 24 bytes data in OMAP24XX DMA mode
-	 */
-	if (cpu_is_omap24xx() && packets < ep->maxpacket) {
-		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
-				packets, 1, OMAP_DMA_SYNC_ELEMENT,
-				dma_trigger, 0);
-		req->dma_bytes = packets;
-	} else {
-		/* set up this DMA transfer, enable the fifo, start */
-		packets /= ep->ep.maxpacket;
-		packets = min(packets, (unsigned)UDC_RXN_TC + 1);
-		req->dma_bytes = packets * ep->ep.maxpacket;
-		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
-				ep->ep.maxpacket >> 1, packets,
-				OMAP_DMA_SYNC_ELEMENT,
-				dma_trigger, 0);
-	}
+	/* set up this DMA transfer, enable the fifo, start */
+	packets /= ep->ep.maxpacket;
+	packets = min(packets, (unsigned)UDC_RXN_TC + 1);
+	req->dma_bytes = packets * ep->ep.maxpacket;
+	omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
+			ep->ep.maxpacket >> 1, packets,
+			OMAP_DMA_SYNC_ELEMENT,
+			dma_trigger, 0);
 	omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
 		OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
 		0, 0);
@@ -760,10 +739,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 	ep->dma_channel = channel;
 
 	if (is_in) {
-		if (cpu_is_omap24xx())
-			dma_channel = OMAP24XX_DMA(USB_W2FC_TX0, channel);
-		else
-			dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel;
+		dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel;
 		status = omap_request_dma(dma_channel,
 			ep->ep.name, dma_error, ep, &ep->lch);
 		if (status == 0) {
@@ -780,11 +756,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 				0, 0);
 		}
 	} else {
-		if (cpu_is_omap24xx())
-			dma_channel = OMAP24XX_DMA(USB_W2FC_RX0, channel);
-		else
-			dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel;
-
+		dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel;
 		status = omap_request_dma(dma_channel,
 			ep->ep.name, dma_error, ep, &ep->lch);
 		if (status == 0) {
@@ -808,7 +780,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 		omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ);
 
 		/* channel type P: hw synch (fifo) */
-		if (cpu_class_is_omap1() && !cpu_is_omap15xx())
+		if (!cpu_is_omap15xx())
 			omap_set_dma_channel_mode(ep->lch, OMAP_DMA_LCH_P);
 	}
 
@@ -928,13 +900,11 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 	/* this isn't bogus, but OMAP DMA isn't the only hardware to
 	 * have a hard time with partial packet reads...  reject it.
-	 * Except OMAP2 can handle the small packets.
 	 */
 	if (use_dma
 			&& ep->has_dma
 			&& ep->bEndpointAddress != 0
 			&& (ep->bEndpointAddress & USB_DIR_IN) == 0
-			&& !cpu_class_is_omap2()
 			&& (req->req.length % ep->ep.maxpacket) != 0) {
 		DBG("%s, no partial packet OUT reads\n", __func__);
 		return -EMSGSIZE;
@@ -2090,10 +2060,6 @@ static inline int machine_without_vbus_sense(void)
 {
 	return (machine_is_omap_innovator()
 		|| machine_is_omap_osk()
-		|| machine_is_omap_apollon()
-#ifndef CONFIG_MACH_OMAP_H4_OTG
-		|| machine_is_omap_h4()
-#endif
 		|| machine_is_sx1()
 		|| cpu_is_omap7xx() /* No known omap7xx boards with vbus sense */
 		);
@@ -2307,12 +2273,9 @@ static int proc_otg_show(struct seq_file *s)
 	u32		trans = 0;
 	char		*ctrl_name = "(UNKNOWN)";
 
-	/* XXX This needs major revision for OMAP2+ */
 	tmp = omap_readl(OTG_REV);
-	if (cpu_class_is_omap1()) {
-		ctrl_name = "tranceiver_ctrl";
-		trans = omap_readw(USB_TRANSCEIVER_CTRL);
-	}
+	ctrl_name = "tranceiver_ctrl";
+	trans = omap_readw(USB_TRANSCEIVER_CTRL);
 	seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
 		tmp >> 4, tmp & 0xf, ctrl_name, trans);
 	tmp = omap_readw(OTG_SYSCON_1);
@@ -2399,14 +2362,12 @@ static int proc_udc_show(struct seq_file *s, void *_)
 		HMC,
 		udc->transceiver
 			? udc->transceiver->label
-			: ((cpu_is_omap1710() || cpu_is_omap24xx())
+			: (cpu_is_omap1710()
 				? "external" : "(none)"));
-	if (cpu_class_is_omap1()) {
-		seq_printf(s, "ULPD control %04x req %04x status %04x\n",
-			omap_readw(ULPD_CLOCK_CTRL),
-			omap_readw(ULPD_SOFT_REQ),
-			omap_readw(ULPD_STATUS_REQ));
-	}
+	seq_printf(s, "ULPD control %04x req %04x status %04x\n",
+		omap_readw(ULPD_CLOCK_CTRL),
+		omap_readw(ULPD_SOFT_REQ),
+		omap_readw(ULPD_STATUS_REQ));
 
 	/* OTG controller registers */
 	if (!cpu_is_omap15xx())
@@ -2591,7 +2552,7 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 		 * and ignored for PIO-IN on newer chips
 		 * (for more reliable behavior)
 		 */
-		if (!use_dma || cpu_is_omap15xx() || cpu_is_omap24xx())
+		if (!use_dma || cpu_is_omap15xx())
 			dbuf = 0;
 
 		switch (maxp) {
@@ -2795,8 +2756,8 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 	struct usb_phy		*xceiv = NULL;
 	const char		*type = NULL;
 	struct omap_usb_config	*config = pdev->dev.platform_data;
-	struct clk		*dc_clk;
-	struct clk		*hhc_clk;
+	struct clk		*dc_clk = NULL;
+	struct clk		*hhc_clk = NULL;
 
 	/* NOTE:  "knows" the order of the resources! */
 	if (!request_mem_region(pdev->resource[0].start,
@@ -2816,16 +2777,6 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 		udelay(100);
 	}
 
-	if (cpu_is_omap24xx()) {
-		dc_clk = clk_get(&pdev->dev, "usb_fck");
-		hhc_clk = clk_get(&pdev->dev, "usb_l4_ick");
-		BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
-		/* can't use omap_udc_enable_clock yet */
-		clk_enable(dc_clk);
-		clk_enable(hhc_clk);
-		udelay(100);
-	}
-
 	if (cpu_is_omap7xx()) {
 		dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
 		hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck");
@@ -2875,14 +2826,6 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 
 		hmc = HMC_1610;
 
-		if (cpu_is_omap24xx()) {
-			/* this could be transceiverless in one of the
-			 * "we don't need to know" modes.
-			 */
-			type = "external";
-			goto known;
-		}
-
 		switch (hmc) {
 		case 0:			/* POWERUP DEFAULT == 0 */
 		case 4:
@@ -2921,7 +2864,7 @@ bad_on_1710:
 			goto cleanup0;
 		}
 	}
-known:
+
 	INFO("hmc mode %d, %s transceiver\n", hmc, type);
 
 	/* a "gadget" abstracts/virtualizes the controller */
@@ -2975,16 +2918,6 @@ known:
 		clk_disable(dc_clk);
 	}
 
-	if (cpu_is_omap24xx()) {
-		udc->dc_clk = dc_clk;
-		udc->hhc_clk = hhc_clk;
-		/* FIXME OMAP2 don't release hhc & dc clock */
-#if 0
-		clk_disable(hhc_clk);
-		clk_disable(dc_clk);
-#endif
-	}
-
 	create_proc_file();
 	status = device_add(&udc->gadget.dev);
 	if (status)
@@ -3013,7 +2946,7 @@ cleanup0:
 	if (xceiv)
 		usb_put_transceiver(xceiv);
 
-	if (cpu_is_omap16xx() || cpu_is_omap24xx() || cpu_is_omap7xx()) {
+	if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
 		clk_disable(hhc_clk);
 		clk_disable(dc_clk);
 		clk_put(hhc_clk);
-- 
cgit v1.2.3-70-g09d2


From 80dd1358d33e6c85018e1e1c5d78b29ac466221a Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Tue, 29 May 2012 14:26:09 +0300
Subject: usb: gadget: omap_udc: make checkpatch.pl happy

This patch is just a cleanup patch to make
checkpatch.pl a little happier with the
omap_udc.c driver.

No functional changes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/omap_udc.c | 201 +++++++++++++++++++++++++-----------------
 1 file changed, 121 insertions(+), 80 deletions(-)

diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 24d81dcb7b4..aa2d174a252 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -36,9 +36,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <linux/prefetch.h>
+#include <linux/io.h>
 
 #include <asm/byteorder.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
@@ -84,14 +84,14 @@
 #ifdef	USE_ISO
 static unsigned fifo_mode = 3;
 #else
-static unsigned fifo_mode = 0;
+static unsigned fifo_mode;
 #endif
 
 /* "modprobe omap_udc fifo_mode=42", or else as a kernel
  * boot parameter "omap_udc:fifo_mode=42"
  */
-module_param (fifo_mode, uint, 0);
-MODULE_PARM_DESC (fifo_mode, "endpoint configuration");
+module_param(fifo_mode, uint, 0);
+MODULE_PARM_DESC(fifo_mode, "endpoint configuration");
 
 #ifdef	USE_DMA
 static bool use_dma = 1;
@@ -99,8 +99,8 @@ static bool use_dma = 1;
 /* "modprobe omap_udc use_dma=y", or else as a kernel
  * boot parameter "omap_udc:use_dma=y"
  */
-module_param (use_dma, bool, 0);
-MODULE_PARM_DESC (use_dma, "enable/disable DMA");
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable DMA");
 #else	/* !USE_DMA */
 
 /* save a bit of code */
@@ -108,8 +108,8 @@ MODULE_PARM_DESC (use_dma, "enable/disable DMA");
 #endif	/* !USE_DMA */
 
 
-static const char driver_name [] = "omap_udc";
-static const char driver_desc [] = DRIVER_DESC;
+static const char driver_name[] = "omap_udc";
+static const char driver_desc[] = DRIVER_DESC;
 
 /*-------------------------------------------------------------------------*/
 
@@ -247,7 +247,7 @@ static int omap_ep_disable(struct usb_ep *_ep)
 
 	spin_lock_irqsave(&ep->udc->lock, flags);
 	ep->ep.desc = NULL;
-	nuke (ep, -ESHUTDOWN);
+	nuke(ep, -ESHUTDOWN);
 	ep->ep.maxpacket = ep->maxpacket;
 	ep->has_dma = 0;
 	omap_writew(UDC_SET_HALT, UDC_CTRL);
@@ -270,7 +270,7 @@ omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 	req = kzalloc(sizeof(*req), gfp_flags);
 	if (req) {
 		req->req.dma = DMA_ADDR_INVALID;
-		INIT_LIST_HEAD (&req->queue);
+		INIT_LIST_HEAD(&req->queue);
 	}
 	return &req->req;
 }
@@ -281,7 +281,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req)
 	struct omap_req	*req = container_of(_req, struct omap_req, req);
 
 	if (_req)
-		kfree (req);
+		kfree(req);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -361,10 +361,10 @@ write_packet(u8 *buf, struct omap_req *req, unsigned max)
 	return len;
 }
 
-// FIXME change r/w fifo calling convention
+/* FIXME change r/w fifo calling convention */
 
 
-// return:  0 = still running, 1 = completed, negative = errno
+/* return:  0 = still running, 1 = completed, negative = errno */
 static int write_fifo(struct omap_ep *ep, struct omap_req *req)
 {
 	u8		*buf;
@@ -426,7 +426,7 @@ read_packet(u8 *buf, struct omap_req *req, unsigned avail)
 	return len;
 }
 
-// return:  0 = still running, 1 = queue empty, negative = errno
+/* return:  0 = still running, 1 = queue empty, negative = errno */
 static int read_fifo(struct omap_ep *ep, struct omap_req *req)
 {
 	u8		*buf;
@@ -662,7 +662,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
 		}
 		omap_writew(UDC_TXN_DONE, UDC_IRQ_SRC);
 
-		if (!list_empty (&ep->queue)) {
+		if (!list_empty(&ep->queue)) {
 			req = container_of(ep->queue.next,
 					struct omap_req, queue);
 			next_in_dma(ep, req);
@@ -681,7 +681,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
 		}
 		omap_writew(UDC_RXN_EOT, UDC_IRQ_SRC);
 
-		if (!list_empty (&ep->queue)) {
+		if (!list_empty(&ep->queue)) {
 			req = container_of(ep->queue.next,
 					struct omap_req, queue);
 			next_out_dma(ep, req);
@@ -954,7 +954,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		int	is_in;
 
 		if (ep->bEndpointAddress == 0) {
-			if (!udc->ep0_pending || !list_empty (&ep->queue)) {
+			if (!udc->ep0_pending || !list_empty(&ep->queue)) {
 				spin_unlock_irqrestore(&udc->lock, flags);
 				return -EL2HLT;
 			}
@@ -981,7 +981,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 				 * always an IN ... even for IN transfers,
 				 * a weird case which seem to stall OMAP.
 				 */
-				omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
+				omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+						UDC_EP_NUM);
 				omap_writew(UDC_CLR_EP, UDC_CTRL);
 				omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
 				omap_writew(UDC_EP_DIR, UDC_EP_NUM);
@@ -993,7 +994,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 			/* non-empty DATA stage */
 			} else if (is_in) {
-				omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
+				omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+						UDC_EP_NUM);
 			} else {
 				if (udc->ep0_setup)
 					goto irq_wait;
@@ -1041,7 +1043,7 @@ static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 	spin_lock_irqsave(&ep->udc->lock, flags);
 
 	/* make sure it's actually queued on this endpoint */
-	list_for_each_entry (req, &ep->queue, queue) {
+	list_for_each_entry(req, &ep->queue, queue) {
 		if (&req->req == _req)
 			break;
 	}
@@ -1148,8 +1150,8 @@ static struct usb_ep_ops omap_ep_ops = {
 	.dequeue	= omap_ep_dequeue,
 
 	.set_halt	= omap_ep_set_halt,
-	// fifo_status ... report bytes in fifo
-	// fifo_flush ... flush fifo
+	/* fifo_status ... report bytes in fifo */
+	/* fifo_flush ... flush fifo */
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1379,7 +1381,7 @@ static void udc_quiesce(struct omap_udc *udc)
 
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
 	nuke(&udc->ep[0], -ESHUTDOWN);
-	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list)
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list)
 		nuke(ep, -ESHUTDOWN);
 }
 
@@ -1495,7 +1497,8 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
 				/* read next OUT packet of request, maybe
 				 * reactiviting the fifo; stall on errors.
 				 */
-				if (!req || (stat = read_fifo(ep0, req)) < 0) {
+				stat = read_fifo(ep0, req);
+				if (!req || stat < 0) {
 					omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
 					udc->ep0_pending = 0;
 					stat = 0;
@@ -1628,7 +1631,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
 				/* this has rude side-effects (aborts) and
 				 * can't really work if DMA-IN is active
 				 */
-				DBG("%s host set_halt, NYET \n", ep->name);
+				DBG("%s host set_halt, NYET\n", ep->name);
 				goto do_stall;
 			}
 			use_ep(ep, 0);
@@ -1719,7 +1722,7 @@ delegate:
 			 */
 			udc->ep0_setup = 1;
 			spin_unlock(&udc->lock);
-			status = udc->driver->setup (&udc->gadget, &u.r);
+			status = udc->driver->setup(&udc->gadget, &u.r);
 			spin_lock(&udc->lock);
 			udc->ep0_setup = 0;
 		}
@@ -1764,7 +1767,7 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
 				VDBG("connect\n");
 				if (!udc->transceiver)
 					pullup_enable(udc);
-				// if (driver->connect) call it
+				/* if (driver->connect) call it */
 			} else if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
 				udc->gadget.speed = USB_SPEED_UNKNOWN;
 				if (!udc->transceiver)
@@ -1796,7 +1799,7 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
 	}
 	if (change & UDC_SUS) {
 		if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
-			// FIXME tell isp1301 to suspend/resume (?)
+			/* FIXME tell isp1301 to suspend/resume (?) */
 			if (devstat & UDC_SUS) {
 				VDBG("suspend\n");
 				update_otg(udc);
@@ -1999,7 +2002,7 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
 	spin_lock_irqsave(&udc->lock, flags);
 
 	/* handle all non-DMA ISO transfers */
-	list_for_each_entry (ep, &udc->iso, iso) {
+	list_for_each_entry(ep, &udc->iso, iso) {
 		u16		stat;
 		struct omap_req	*req;
 
@@ -2058,11 +2061,11 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
 
 static inline int machine_without_vbus_sense(void)
 {
-	return (machine_is_omap_innovator()
+	return machine_is_omap_innovator()
 		|| machine_is_omap_osk()
 		|| machine_is_sx1()
-		|| cpu_is_omap7xx() /* No known omap7xx boards with vbus sense */
-		);
+		/* No known omap7xx boards with vbus sense */
+		|| cpu_is_omap7xx();
 }
 
 static int omap_udc_start(struct usb_gadget_driver *driver,
@@ -2076,7 +2079,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 	if (!udc)
 		return -ENODEV;
 	if (!driver
-			// FIXME if otg, check:  driver->is_otg
+			/* FIXME if otg, check:  driver->is_otg */
 			|| driver->max_speed < USB_SPEED_FULL
 			|| !bind || !driver->setup)
 		return -EINVAL;
@@ -2088,7 +2091,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 	}
 
 	/* reset state */
-	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
 		ep->irqs = 0;
 		if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
 			continue;
@@ -2126,7 +2129,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 		if (status < 0) {
 			ERR("can't bind to transceiver\n");
 			if (driver->unbind) {
-				driver->unbind (&udc->gadget);
+				driver->unbind(&udc->gadget);
 				udc->gadget.dev.driver = NULL;
 				udc->driver = NULL;
 			}
@@ -2134,9 +2137,9 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 		}
 	} else {
 		if (can_pullup(udc))
-			pullup_enable (udc);
+			pullup_enable(udc);
 		else
-			pullup_disable (udc);
+			pullup_disable(udc);
 	}
 
 	/* boards that don't have VBUS sensing can't autogate 48MHz;
@@ -2195,7 +2198,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver)
 static const char proc_filename[] = "driver/udc";
 
 #define FOURBITS "%s%s%s%s"
-#define EIGHTBITS FOURBITS FOURBITS
+#define EIGHTBITS "%s%s%s%s%s%s%s%s"
 
 static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 {
@@ -2217,12 +2220,21 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 		"\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n",
 		ep->name, buf,
 		ep->double_buf ? "dbuf " : "",
-		({char *s; switch(ep->ackwait){
-		case 0: s = ""; break;
-		case 1: s = "(ackw) "; break;
-		case 2: s = "(ackw2) "; break;
-		default: s = "(?) "; break;
-		} s;}),
+		({ char *s;
+		switch (ep->ackwait) {
+		case 0:
+			s = "";
+			break;
+		case 1:
+			s = "(ackw) ";
+			break;
+		case 2:
+			s = "(ackw2) ";
+			break;
+		default:
+			s = "(?) ";
+			break;
+		} s; }),
 		ep->irqs, stat_flg,
 		(stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "",
 		(stat_flg & UDC_MISS_IN) ? "miss_in " : "",
@@ -2238,10 +2250,10 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 		(stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "",
 		(stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : "");
 
-	if (list_empty (&ep->queue))
+	if (list_empty(&ep->queue))
 		seq_printf(s, "\t(queue empty)\n");
 	else
-		list_for_each_entry (req, &ep->queue, queue) {
+		list_for_each_entry(req, &ep->queue, queue) {
 			unsigned	length = req->req.actual;
 
 			if (use_dma && buf[0]) {
@@ -2259,11 +2271,16 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 static char *trx_mode(unsigned m, int enabled)
 {
 	switch (m) {
-	case 0:		return enabled ? "*6wire" : "unused";
-	case 1:		return "4wire";
-	case 2:		return "3wire";
-	case 3:		return "6wire";
-	default:	return "unknown";
+	case 0:
+		return enabled ? "*6wire" : "unused";
+	case 1:
+		return "4wire";
+	case 2:
+		return "3wire";
+	case 3:
+		return "6wire";
+	default:
+		return "unknown";
 	}
 }
 
@@ -2295,7 +2312,7 @@ static int proc_otg_show(struct seq_file *s)
 			" b_ase_brst=%d hmc=%d\n", tmp,
 		(tmp & OTG_EN) ? " otg_en" : "",
 		(tmp & USBX_SYNCHRO) ? " synchro" : "",
-		// much more SRP stuff
+		/* much more SRP stuff */
 		(tmp & SRP_DATA) ? " srp_data" : "",
 		(tmp & SRP_VBUS) ? " srp_vbus" : "",
 		(tmp & OTG_PADEN) ? " otg_paden" : "",
@@ -2383,7 +2400,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
 		(tmp & UDC_SELF_PWR) ? " self_pwr" : "",
 		(tmp & UDC_SOFF_DIS) ? " soff_dis" : "",
 		(tmp & UDC_PULLUP_EN) ? " PULLUP" : "");
-	// syscon2 is write-only
+	/* syscon2 is write-only */
 
 	/* UDC controller registers */
 	if (!(tmp & UDC_PULLUP_EN)) {
@@ -2467,7 +2484,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
 	if (tmp & UDC_ATT) {
 		proc_ep_show(s, &udc->ep[0]);
 		if (tmp & UDC_ADD) {
-			list_for_each_entry (ep, &udc->gadget.ep_list,
+			list_for_each_entry(ep, &udc->gadget.ep_list,
 					ep.ep_list) {
 				if (ep->ep.desc)
 					proc_ep_show(s, ep);
@@ -2536,14 +2553,29 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 	/* chip setup ... bit values are same for IN, OUT */
 	if (type == USB_ENDPOINT_XFER_ISOC) {
 		switch (maxp) {
-		case 8:		epn_rxtx = 0 << 12; break;
-		case 16:	epn_rxtx = 1 << 12; break;
-		case 32:	epn_rxtx = 2 << 12; break;
-		case 64:	epn_rxtx = 3 << 12; break;
-		case 128:	epn_rxtx = 4 << 12; break;
-		case 256:	epn_rxtx = 5 << 12; break;
-		case 512:	epn_rxtx = 6 << 12; break;
-		default:	BUG();
+		case 8:
+			epn_rxtx = 0 << 12;
+			break;
+		case 16:
+			epn_rxtx = 1 << 12;
+			break;
+		case 32:
+			epn_rxtx = 2 << 12;
+			break;
+		case 64:
+			epn_rxtx = 3 << 12;
+			break;
+		case 128:
+			epn_rxtx = 4 << 12;
+			break;
+		case 256:
+			epn_rxtx = 5 << 12;
+			break;
+		case 512:
+			epn_rxtx = 6 << 12;
+			break;
+		default:
+			BUG();
 		}
 		epn_rxtx |= UDC_EPN_RX_ISO;
 		dbuf = 1;
@@ -2556,11 +2588,20 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 			dbuf = 0;
 
 		switch (maxp) {
-		case 8:		epn_rxtx = 0 << 12; break;
-		case 16:	epn_rxtx = 1 << 12; break;
-		case 32:	epn_rxtx = 2 << 12; break;
-		case 64:	epn_rxtx = 3 << 12; break;
-		default:	BUG();
+		case 8:
+			epn_rxtx = 0 << 12;
+			break;
+		case 16:
+			epn_rxtx = 1 << 12;
+			break;
+		case 32:
+			epn_rxtx = 2 << 12;
+			break;
+		case 64:
+			epn_rxtx = 3 << 12;
+			break;
+		default:
+			BUG();
 		}
 		if (dbuf && addr)
 			epn_rxtx |= UDC_EPN_RX_DB;
@@ -2600,7 +2641,7 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 	ep->ep.name = ep->name;
 	ep->ep.ops = &omap_ep_ops;
 	ep->ep.maxpacket = ep->maxpacket = maxp;
-	list_add_tail (&ep->ep.ep_list, &udc->gadget.ep_list);
+	list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
 
 	return buf;
 }
@@ -2608,7 +2649,7 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 static void omap_udc_release(struct device *dev)
 {
 	complete(udc->done);
-	kfree (udc);
+	kfree(udc);
 	udc = NULL;
 }
 
@@ -2626,13 +2667,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 	omap_writew(0, UDC_TXDMA_CFG);
 
 	/* UDC_PULLUP_EN gates the chip clock */
-	// OTG_SYSCON_1 |= DEV_IDLE_EN;
+	/* OTG_SYSCON_1 |= DEV_IDLE_EN; */
 
 	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
 	if (!udc)
 		return -ENOMEM;
 
-	spin_lock_init (&udc->lock);
+	spin_lock_init(&udc->lock);
 
 	udc->gadget.ops = &omap_gadget_ops;
 	udc->gadget.ep0 = &udc->ep[0].ep;
@@ -2662,13 +2703,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 		omap_writew(0, UDC_EP_TX(tmp));
 	}
 
-#define OMAP_BULK_EP(name,addr) \
+#define OMAP_BULK_EP(name, addr) \
 	buf = omap_ep_setup(name "-bulk", addr, \
 			USB_ENDPOINT_XFER_BULK, buf, 64, 1);
-#define OMAP_INT_EP(name,addr, maxp) \
+#define OMAP_INT_EP(name, addr, maxp) \
 	buf = omap_ep_setup(name "-int", addr, \
 			USB_ENDPOINT_XFER_INT, buf, maxp, 0);
-#define OMAP_ISO_EP(name,addr, maxp) \
+#define OMAP_ISO_EP(name, addr, maxp) \
 	buf = omap_ep_setup(name "-iso", addr, \
 			USB_ENDPOINT_XFER_ISOC, buf, maxp, 1);
 
@@ -2869,11 +2910,11 @@ bad_on_1710:
 
 	/* a "gadget" abstracts/virtualizes the controller */
 	status = omap_udc_setup(pdev, xceiv);
-	if (status) {
+	if (status)
 		goto cleanup0;
-	}
+
 	xceiv = NULL;
-	// "udc" is now valid
+	/* "udc" is now valid */
 	pullup_disable(udc);
 #if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	udc->gadget.is_otg = (config->otg != 0);
@@ -2887,7 +2928,7 @@ bad_on_1710:
 
 	/* USB general purpose IRQ:  ep0, state changes, dma, etc */
 	status = request_irq(pdev->resource[1].start, omap_udc_irq,
-			IRQF_SAMPLE_RANDOM, driver_name, udc);
+			0, driver_name, udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[1].start, status);
@@ -2896,7 +2937,7 @@ bad_on_1710:
 
 	/* USB "non-iso" IRQ (PIO for all but ep0) */
 	status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
-			IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
+			0, "omap_udc pio", udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[2].start, status);
@@ -2939,7 +2980,7 @@ cleanup2:
 	free_irq(pdev->resource[1].start, udc);
 
 cleanup1:
-	kfree (udc);
+	kfree(udc);
 	udc = NULL;
 
 cleanup0:
-- 
cgit v1.2.3-70-g09d2


From 5b6d84b78930a4fa3f8380dc0ec4ac427d620201 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Tue, 29 May 2012 14:27:52 +0300
Subject: usb: gadget: omap_udc: remove useless print

that print isn't needed at all. Remove it
and move the use_dma reinitialization to
probe() function.

Note that ideally we would drop all
cpu_is_* and machine_is_* checks from
this driver instead. Later patches will
come to get rid of those.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/omap_udc.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index aa2d174a252..5e7b8912ef3 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -2800,6 +2800,9 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 	struct clk		*dc_clk = NULL;
 	struct clk		*hhc_clk = NULL;
 
+	if (cpu_is_omap7xx())
+		use_dma = 0;
+
 	/* NOTE:  "knows" the order of the resources! */
 	if (!request_mem_region(pdev->resource[0].start,
 			pdev->resource[0].end - pdev->resource[0].start + 1,
@@ -3096,16 +3099,6 @@ static struct platform_driver udc_driver = {
 
 static int __init udc_init(void)
 {
-	/* Disable DMA for omap7xx -- it doesn't work right. */
-	if (cpu_is_omap7xx())
-		use_dma = 0;
-
-	INFO("%s, version: " DRIVER_VERSION
-#ifdef	USE_ISO
-		" (iso)"
-#endif
-		"%s\n", driver_desc,
-		use_dma ?  " (dma)" : "");
 	return platform_driver_probe(&udc_driver, omap_udc_probe);
 }
 module_init(udc_init);
-- 
cgit v1.2.3-70-g09d2


From dc1737cdd75b692dbdec0e0e22439a0ce1089488 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Tue, 29 May 2012 14:33:30 +0300
Subject: usb: gadget: omap_udc: let it work as a module

this also helps removing a few lines of boilerplate
code.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/omap_udc.c | 23 +++++++----------------
 1 file changed, 7 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 5e7b8912ef3..814aafbed00 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -2535,7 +2535,7 @@ static inline void remove_proc_file(void) {}
  * UDC_SYSCON_1.CFG_LOCK is set can now work.  We won't use that
  * capability yet though.
  */
-static unsigned __init
+static unsigned __devinit
 omap_ep_setup(char *name, u8 addr, u8 type,
 		unsigned buf, unsigned maxp, int dbuf)
 {
@@ -2653,7 +2653,7 @@ static void omap_udc_release(struct device *dev)
 	udc = NULL;
 }
 
-static int __init
+static int __devinit
 omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 {
 	unsigned	tmp, buf;
@@ -2790,7 +2790,7 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 	return 0;
 }
 
-static int __init omap_udc_probe(struct platform_device *pdev)
+static int __devinit omap_udc_probe(struct platform_device *pdev)
 {
 	int			status = -ENODEV;
 	int			hmc;
@@ -3003,7 +3003,7 @@ cleanup0:
 	return status;
 }
 
-static int __exit omap_udc_remove(struct platform_device *pdev)
+static int __devexit omap_udc_remove(struct platform_device *pdev)
 {
 	DECLARE_COMPLETION_ONSTACK(done);
 
@@ -3088,7 +3088,8 @@ static int omap_udc_resume(struct platform_device *dev)
 /*-------------------------------------------------------------------------*/
 
 static struct platform_driver udc_driver = {
-	.remove		= __exit_p(omap_udc_remove),
+	.probe		= omap_udc_probe,
+	.remove		= __devexit_p(omap_udc_remove),
 	.suspend	= omap_udc_suspend,
 	.resume		= omap_udc_resume,
 	.driver		= {
@@ -3097,17 +3098,7 @@ static struct platform_driver udc_driver = {
 	},
 };
 
-static int __init udc_init(void)
-{
-	return platform_driver_probe(&udc_driver, omap_udc_probe);
-}
-module_init(udc_init);
-
-static void __exit udc_exit(void)
-{
-	platform_driver_unregister(&udc_driver);
-}
-module_exit(udc_exit);
+module_platform_driver(udc_driver);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-70-g09d2


From 70617db7ad7395498e6bc54c634199bf895426c6 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Tue, 29 May 2012 14:36:42 +0300
Subject: usb: gadget: omap_udc: remove possiblity of NULL pointer de-reference

when allocating a request, it's better programming
practice to make sure we return NULL if allocation
failed.

This will ensure that, if struct usb_request isn't
the first member on our structure, we don't cheat
the gadget driver into thinking allocating worked
because pointer isn't 0.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/omap_udc.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 814aafbed00..f13bcdc7567 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -268,10 +268,12 @@ omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 	struct omap_req	*req;
 
 	req = kzalloc(sizeof(*req), gfp_flags);
-	if (req) {
-		req->req.dma = DMA_ADDR_INVALID;
-		INIT_LIST_HEAD(&req->queue);
-	}
+	if (!req)
+		return NULL;
+
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+
 	return &req->req;
 }
 
-- 
cgit v1.2.3-70-g09d2


From 23673d7d26d81bd17cde3ed74c57b3f39585325f Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Tue, 29 May 2012 14:38:32 +0300
Subject: usb: gadget: omap_udc: kfree(NULL) is safe

we don't need to check for _req because
kfree(NULL) is safe. Also, if someone
actually passes a NULL pointer to be freed
by usb_ep_free_request(), he deserves any
issue he faces.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/omap_udc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index f13bcdc7567..50e8490867e 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -282,8 +282,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req)
 {
 	struct omap_req	*req = container_of(_req, struct omap_req, req);
 
-	if (_req)
-		kfree(req);
+	kfree(req);
 }
 
 /*-------------------------------------------------------------------------*/
-- 
cgit v1.2.3-70-g09d2


From dd8e93814a357d8f032a93b6d17216436c762e9f Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Tue, 29 May 2012 14:42:56 +0300
Subject: usb: gadget: omap_udc: use generic map/unmap routines

This patch makes use of the generic map/unmap
routines on the omap_udc driver. Removes
some useless and duplicated code.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/omap_udc.c | 46 +++++++------------------------------------
 1 file changed, 7 insertions(+), 39 deletions(-)

diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 50e8490867e..b6cc8b19f39 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -59,8 +59,6 @@
 #define	DRIVER_DESC	"OMAP UDC driver"
 #define	DRIVER_VERSION	"4 October 2004"
 
-#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
-
 /*
  * The OMAP UDC needs _very_ early endpoint setup:  before enabling the
  * D+ pullup to allow enumeration.  That's too early for the gadget
@@ -271,7 +269,6 @@ omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 	if (!req)
 		return NULL;
 
-	req->req.dma = DMA_ADDR_INVALID;
 	INIT_LIST_HEAD(&req->queue);
 
 	return &req->req;
@@ -290,6 +287,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req)
 static void
 done(struct omap_ep *ep, struct omap_req *req, int status)
 {
+	struct omap_udc		*udc = ep->udc;
 	unsigned		stopped = ep->stopped;
 
 	list_del_init(&req->queue);
@@ -299,22 +297,9 @@ done(struct omap_ep *ep, struct omap_req *req, int status)
 	else
 		status = req->req.status;
 
-	if (use_dma && ep->has_dma) {
-		if (req->mapped) {
-			dma_unmap_single(ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-			req->req.dma = DMA_ADDR_INVALID;
-			req->mapped = 0;
-		} else
-			dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-	}
+	if (use_dma && ep->has_dma)
+		usb_gadget_unmap_request(&udc->gadget, &req->req,
+				(ep->bEndpointAddress & USB_DIR_IN));
 
 #ifndef	USB_TRACE
 	if (status && status != -ESHUTDOWN)
@@ -915,26 +900,9 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	if (use_dma && ep->has_dma) {
-		if (req->req.dma == DMA_ADDR_INVALID) {
-			req->req.dma = dma_map_single(
-				ep->udc->gadget.dev.parent,
-				req->req.buf,
-				req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-			req->mapped = 1;
-		} else {
-			dma_sync_single_for_device(
-				ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-			req->mapped = 0;
-		}
-	}
+	if (use_dma && ep->has_dma)
+		usb_gadget_map_request(&udc->gadget, &req->req,
+				(ep->bEndpointAddress & USB_DIR_IN));
 
 	VDBG("%s queue req %p, len %d buf %p\n",
 		ep->ep.name, _req, _req->length, _req->buf);
-- 
cgit v1.2.3-70-g09d2


From 338edabcd879320f0f86cc701161b95277be6b5d Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Fri, 18 May 2012 14:33:46 +0530
Subject: usb: s3c-hsotg: Use devm_* functions in s3c-hsotg.c file

devm_* functions are used to replace kzalloc, request_mem_region, ioremap
and request_irq functions in probe call. With the usage of devm_* functions
explicit freeing and unmapping is not required.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c-hsotg.c | 51 +++++++++---------------------------------
 1 file changed, 11 insertions(+), 40 deletions(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index f4abb0ed987..d37585105bb 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -136,7 +136,6 @@ struct s3c_hsotg_ep {
  * @driver: USB gadget driver
  * @plat: The platform specific configuration data.
  * @regs: The memory area mapped for accessing registers.
- * @regs_res: The resource that was allocated when claiming register space.
  * @irq: The IRQ number we are using
  * @supplies: Definition of USB power supplies
  * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
@@ -158,7 +157,6 @@ struct s3c_hsotg {
 	struct s3c_hsotg_plat	 *plat;
 
 	void __iomem		*regs;
-	struct resource		*regs_res;
 	int			irq;
 	struct clk		*clk;
 
@@ -3477,7 +3475,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	hsotg = kzalloc(sizeof(struct s3c_hsotg), GFP_KERNEL);
+	hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL);
 	if (!hsotg) {
 		dev_err(dev, "cannot get memory\n");
 		return -ENOMEM;
@@ -3489,46 +3487,33 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	hsotg->clk = clk_get(&pdev->dev, "otg");
 	if (IS_ERR(hsotg->clk)) {
 		dev_err(dev, "cannot get otg clock\n");
-		ret = PTR_ERR(hsotg->clk);
-		goto err_mem;
+		return PTR_ERR(hsotg->clk);
 	}
 
 	platform_set_drvdata(pdev, hsotg);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "cannot find register resource 0\n");
-		ret = -EINVAL;
-		goto err_clk;
-	}
-
-	hsotg->regs_res = request_mem_region(res->start, resource_size(res),
-					     dev_name(dev));
-	if (!hsotg->regs_res) {
-		dev_err(dev, "cannot reserve registers\n");
-		ret = -ENOENT;
-		goto err_clk;
-	}
 
-	hsotg->regs = ioremap(res->start, resource_size(res));
+	hsotg->regs = devm_request_and_ioremap(&pdev->dev, res);
 	if (!hsotg->regs) {
 		dev_err(dev, "cannot map registers\n");
 		ret = -ENXIO;
-		goto err_regs_res;
+		goto err_clk;
 	}
 
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0) {
 		dev_err(dev, "cannot find IRQ\n");
-		goto err_regs;
+		goto err_clk;
 	}
 
 	hsotg->irq = ret;
 
-	ret = request_irq(ret, s3c_hsotg_irq, 0, dev_name(dev), hsotg);
+	ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0,
+				dev_name(dev), hsotg);
 	if (ret < 0) {
 		dev_err(dev, "cannot claim IRQ\n");
-		goto err_regs;
+		goto err_clk;
 	}
 
 	dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
@@ -3558,7 +3543,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 				 hsotg->supplies);
 	if (ret) {
 		dev_err(dev, "failed to request supplies: %d\n", ret);
-		goto err_irq;
+		goto err_clk;
 	}
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
@@ -3642,19 +3627,11 @@ err_ep_mem:
 err_supplies:
 	s3c_hsotg_phy_disable(hsotg);
 	regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
-err_irq:
-	free_irq(hsotg->irq, hsotg);
-err_regs:
-	iounmap(hsotg->regs);
-
-err_regs_res:
-	release_resource(hsotg->regs_res);
-	kfree(hsotg->regs_res);
+
 err_clk:
 	clk_disable_unprepare(hsotg->clk);
 	clk_put(hsotg->clk);
-err_mem:
-	kfree(hsotg);
+
 	return ret;
 }
 
@@ -3675,12 +3652,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
 		usb_gadget_unregister_driver(hsotg->driver);
 	}
 
-	free_irq(hsotg->irq, hsotg);
-	iounmap(hsotg->regs);
-
-	release_resource(hsotg->regs_res);
-	kfree(hsotg->regs_res);
-
 	s3c_hsotg_phy_disable(hsotg);
 	regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
 
-- 
cgit v1.2.3-70-g09d2


From fa84c57516f6da93ebc2601348043e9bcb7b4b4d Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <mina86@mina86.com>
Date: Sat, 26 May 2012 16:32:39 -0700
Subject: usb: gadget: f_mass_storage: change default value of the removable
 parameter
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This commit changes the default value of the removable module parameter
from “y” to “n”.  This comes with line with file_storag's default and
seems to be a better default.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/f_mass_storage.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index f67b453740b..72116fa49ff 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -124,7 +124,7 @@
  *				backing storage.
  *	ro=b[,b...]	Default false, boolean for read-only access.
  *	removable=b[,b...]
- *			Default true, boolean for removable media.
+ *			Default false, boolean for removable media.
  *	cdrom=b[,b...]	Default false, boolean for whether to emulate
  *				a CD-ROM drive.
  *	nofua=b[,b...]	Default false, booleans for ignore FUA flag
@@ -3167,8 +3167,7 @@ fsg_config_from_params(struct fsg_config *cfg,
 	for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
 		lun->ro = !!params->ro[i];
 		lun->cdrom = !!params->cdrom[i];
-		lun->removable = /* Removable by default */
-			params->removable_count <= i || params->removable[i];
+		lun->removable = !!params->removable[i];
 		lun->filename =
 			params->file_count > i && params->file[i][0]
 			? params->file[i]
@@ -3203,4 +3202,3 @@ fsg_common_from_params(struct fsg_common *common,
 	fsg_config_from_params(&cfg, params);
 	return fsg_common_init(common, cdev, &cfg);
 }
-
-- 
cgit v1.2.3-70-g09d2


From d3c568c302ed0e3b2d51f0335f304ca4d85de54b Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Mon, 28 May 2012 23:31:39 -0700
Subject: usb: renesas_usbhs: add DMAEngine ID specification note

renesas_usbhs DMAEngine uses D0FIFO/D1FIFO,
but the data transfer direction should be fixed for keeping consistency.
This patch explain about it on renesas_usbhs.h

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 include/linux/usb/renesas_usbhs.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 547e59cc00e..c5d36c65c33 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -132,6 +132,14 @@ struct renesas_usbhs_driver_param {
 	 * option:
 	 *
 	 * dma id for dmaengine
+	 * The data transfer direction on D0FIFO/D1FIFO should be
+	 * fixed for keeping consistency.
+	 * So, the platform id settings will be..
+	 *	.d0_tx_id = xx_TX,
+	 *	.d1_rx_id = xx_RX,
+	 * or
+	 *	.d1_tx_id = xx_TX,
+	 *	.d0_rx_id = xx_RX,
 	 */
 	int d0_tx_id;
 	int d0_rx_id;
-- 
cgit v1.2.3-70-g09d2


From 560f1187990c6c548756bf2f1183aa19d9c97413 Mon Sep 17 00:00:00 2001
From: Koen Beel <koen.beel@gmail.com>
Date: Wed, 30 May 2012 20:43:37 +0200
Subject: usb: gadget: ffs: add HID descriptor support.

When writing the descriptors to the ep0 file of functionfs, the HID descriptors where not recognized which caused the initialization from user space to fail.

Signed-off-by: Koen Beel <koen.beel@barco.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/f_fs.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index dcd1c7fbb01..8adc79d1b40 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -21,6 +21,7 @@
 #include <linux/blkdev.h>
 #include <linux/pagemap.h>
 #include <linux/export.h>
+#include <linux/hid.h>
 #include <asm/unaligned.h>
 
 #include <linux/usb/composite.h>
@@ -1671,6 +1672,12 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 	}
 		break;
 
+	case HID_DT_HID:
+		pr_vdebug("hid descriptor\n");
+		if (length != sizeof(struct hid_descriptor))
+			goto inv_length;
+		break;
+
 	case USB_DT_OTG:
 		if (length != sizeof(struct usb_otg_descriptor))
 			goto inv_length;
-- 
cgit v1.2.3-70-g09d2


From 0a00790ff4755f2e3eab907a43725cff59fc074b Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 30 May 2012 13:25:57 -0700
Subject: usb: gadget: pch_udc: Fix likely misuse of | for &

Using | with a constant is always true.
Likely this should have be &.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/pch_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 1cfcc9ecbfb..f4fb71c9ae0 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -2208,7 +2208,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
 			return;
 		}
 		if ((td->status & PCH_UDC_BUFF_STS) == PCH_UDC_BS_DMA_DONE)
-			if (td->status | PCH_UDC_DMA_LAST) {
+			if (td->status & PCH_UDC_DMA_LAST) {
 				count = td->status & PCH_UDC_RXTX_BYTES;
 				break;
 			}
-- 
cgit v1.2.3-70-g09d2


From 3de6e63f7845e99981e489ddccf70b3ec02fe00a Mon Sep 17 00:00:00 2001
From: Bhupesh Sharma <bhupesh.sharma@st.com>
Date: Fri, 1 Jun 2012 15:08:54 +0530
Subject: usb: gadget: uvc: Fix string descriptor STALL issue when multiple uvc
 functions are added to a configuration

This patch solved the string descriptor STALL issue when we add multiple UVC
functions in a single configuration using a 'webcam.c' like composite driver.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/f_uvc.c | 38 ++++++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index 2022fe49214..054c35a22fb 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -619,22 +619,28 @@ uvc_bind_config(struct usb_configuration *c,
 	uvc->desc.fs_streaming = fs_streaming;
 	uvc->desc.hs_streaming = hs_streaming;
 
-	/* Allocate string descriptor numbers. */
-	if ((ret = usb_string_id(c->cdev)) < 0)
-		goto error;
-	uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret;
-	uvc_iad.iFunction = ret;
-
-	if ((ret = usb_string_id(c->cdev)) < 0)
-		goto error;
-	uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret;
-	uvc_control_intf.iInterface = ret;
-
-	if ((ret = usb_string_id(c->cdev)) < 0)
-		goto error;
-	uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret;
-	uvc_streaming_intf_alt0.iInterface = ret;
-	uvc_streaming_intf_alt1.iInterface = ret;
+	/* maybe allocate device-global string IDs, and patch descriptors */
+	if (uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id == 0) {
+		/* Allocate string descriptor numbers. */
+		ret = usb_string_id(c->cdev);
+		if (ret < 0)
+			goto error;
+		uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret;
+		uvc_iad.iFunction = ret;
+
+		ret = usb_string_id(c->cdev);
+		if (ret < 0)
+			goto error;
+		uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret;
+		uvc_control_intf.iInterface = ret;
+
+		ret = usb_string_id(c->cdev);
+		if (ret < 0)
+			goto error;
+		uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret;
+		uvc_streaming_intf_alt0.iInterface = ret;
+		uvc_streaming_intf_alt1.iInterface = ret;
+	}
 
 	/* Register the function. */
 	uvc->func.name = "uvc";
-- 
cgit v1.2.3-70-g09d2


From 5797663674b0d802f275761e71593b32b0849242 Mon Sep 17 00:00:00 2001
From: Bhupesh Sharma <bhupesh.sharma@st.com>
Date: Fri, 1 Jun 2012 15:08:55 +0530
Subject: usb: gadget: uvc: Use macro for interrupt endpoint status size
 instead of using a MAGIC number

This patch adds a MACRO for the UVC video control status (interrupt) endpoint and
removes the magic number which was being used earlier.

Some UDCs have issues supporting an interrupt IN endpoint having a max packet
size less than a particular value (say 32). It is easier in that case to simply
change the MACRO value instead of changing the max packet size value at a
number of locations.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/f_uvc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index 054c35a22fb..dd7d7a98ed4 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -59,6 +59,8 @@ static struct usb_gadget_strings *uvc_function_strings[] = {
 #define UVC_INTF_VIDEO_CONTROL			0
 #define UVC_INTF_VIDEO_STREAMING		1
 
+#define STATUS_BYTECOUNT			16	/* 16 bytes status */
+
 static struct usb_interface_assoc_descriptor uvc_iad __initdata = {
 	.bLength		= sizeof(uvc_iad),
 	.bDescriptorType	= USB_DT_INTERFACE_ASSOCIATION,
@@ -87,7 +89,7 @@ static struct usb_endpoint_descriptor uvc_control_ep __initdata = {
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_IN,
 	.bmAttributes		= USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize		= cpu_to_le16(16),
+	.wMaxPacketSize		= cpu_to_le16(STATUS_BYTECOUNT),
 	.bInterval		= 8,
 };
 
@@ -95,7 +97,7 @@ static struct uvc_control_endpoint_descriptor uvc_control_cs_ep __initdata = {
 	.bLength		= UVC_DT_CONTROL_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_CS_ENDPOINT,
 	.bDescriptorSubType	= UVC_EP_INTERRUPT,
-	.wMaxTransferSize	= cpu_to_le16(16),
+	.wMaxTransferSize	= cpu_to_le16(STATUS_BYTECOUNT),
 };
 
 static struct usb_interface_descriptor uvc_streaming_intf_alt0 __initdata = {
-- 
cgit v1.2.3-70-g09d2


From fbcaba0e3dcec8451cccdc1fa92fcddbde2bc3f2 Mon Sep 17 00:00:00 2001
From: Bhupesh Sharma <bhupesh.sharma@st.com>
Date: Fri, 1 Jun 2012 15:08:56 +0530
Subject: usb: gadget: uvc: Add super-speed support to UVC webcam gadget

This patch adds super-speed support to UVC webcam gadget.

Also in this patch:
	- We add the configurability to pass bInterval, bMaxBurst, mult
	  factors for video streaming endpoint (ISOC IN) through module
	  parameters.

	- We use config_ep_by_speed helper routine to configure video
	  streaming endpoint.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/f_uvc.c  | 241 +++++++++++++++++++++++++++++++++++++++-----
 drivers/usb/gadget/f_uvc.h  |   8 +-
 drivers/usb/gadget/uvc.h    |   4 +-
 drivers/usb/gadget/webcam.c |  29 +++++-
 4 files changed, 247 insertions(+), 35 deletions(-)

diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index dd7d7a98ed4..2a8bf0655c6 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -29,6 +29,25 @@
 
 unsigned int uvc_gadget_trace_param;
 
+/*-------------------------------------------------------------------------*/
+
+/* module parameters specific to the Video streaming endpoint */
+static unsigned streaming_interval = 1;
+module_param(streaming_interval, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_interval, "1 - 16");
+
+static unsigned streaming_maxpacket = 1024;
+module_param(streaming_maxpacket, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)");
+
+static unsigned streaming_mult;
+module_param(streaming_mult, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_mult, "0 - 2 (hs/ss only)");
+
+static unsigned streaming_maxburst;
+module_param(streaming_maxburst, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_maxburst, "0 - 15 (ss only)");
+
 /* --------------------------------------------------------------------------
  * Function descriptors
  */
@@ -84,7 +103,7 @@ static struct usb_interface_descriptor uvc_control_intf __initdata = {
 	.iInterface		= 0,
 };
 
-static struct usb_endpoint_descriptor uvc_control_ep __initdata = {
+static struct usb_endpoint_descriptor uvc_fs_control_ep __initdata = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_IN,
@@ -124,7 +143,7 @@ static struct usb_interface_descriptor uvc_streaming_intf_alt1 __initdata = {
 	.iInterface		= 0,
 };
 
-static struct usb_endpoint_descriptor uvc_streaming_ep = {
+static struct usb_endpoint_descriptor uvc_fs_streaming_ep = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_IN,
@@ -133,15 +152,72 @@ static struct usb_endpoint_descriptor uvc_streaming_ep = {
 	.bInterval		= 1,
 };
 
+static struct usb_endpoint_descriptor uvc_hs_streaming_ep = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize		= cpu_to_le16(1024),
+	.bInterval		= 1,
+};
+
+/* super speed support */
+static struct usb_endpoint_descriptor uvc_ss_control_ep __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
+	.bInterval =		8,
+};
+
+static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp __initdata = {
+	.bLength =		sizeof uvc_ss_control_comp,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 3 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+	.wBytesPerInterval =	cpu_to_le16(STATUS_BYTECOUNT),
+};
+
+static struct usb_endpoint_descriptor uvc_ss_streaming_ep __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		4,
+};
+
+static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp = {
+	.bLength =		sizeof uvc_ss_streaming_comp,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 3 values can be tweaked if necessary */
+	.bMaxBurst =		0,
+	.bmAttributes =	0,
+	.wBytesPerInterval =	cpu_to_le16(1024),
+};
+
 static const struct usb_descriptor_header * const uvc_fs_streaming[] = {
 	(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
-	(struct usb_descriptor_header *) &uvc_streaming_ep,
+	(struct usb_descriptor_header *) &uvc_fs_streaming_ep,
 	NULL,
 };
 
 static const struct usb_descriptor_header * const uvc_hs_streaming[] = {
 	(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
-	(struct usb_descriptor_header *) &uvc_streaming_ep,
+	(struct usb_descriptor_header *) &uvc_hs_streaming_ep,
+	NULL,
+};
+
+static const struct usb_descriptor_header * const uvc_ss_streaming[] = {
+	(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
+	(struct usb_descriptor_header *) &uvc_ss_streaming_ep,
+	(struct usb_descriptor_header *) &uvc_ss_streaming_comp,
 	NULL,
 };
 
@@ -217,6 +293,7 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
 	struct uvc_device *uvc = to_uvc(f);
 	struct v4l2_event v4l2_event;
 	struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
+	int ret;
 
 	INFO(f->config->cdev, "uvc_function_set_alt(%u, %u)\n", interface, alt);
 
@@ -264,7 +341,10 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
 			return 0;
 
 		if (uvc->video.ep) {
-			uvc->video.ep->desc = &uvc_streaming_ep;
+			ret = config_ep_by_speed(f->config->cdev->gadget,
+					&(uvc->func), uvc->video.ep);
+			if (ret)
+				return ret;
 			usb_ep_enable(uvc->video.ep);
 		}
 
@@ -370,9 +450,11 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 {
 	struct uvc_input_header_descriptor *uvc_streaming_header;
 	struct uvc_header_descriptor *uvc_control_header;
+	const struct uvc_descriptor_header * const *uvc_control_desc;
 	const struct uvc_descriptor_header * const *uvc_streaming_cls;
 	const struct usb_descriptor_header * const *uvc_streaming_std;
 	const struct usb_descriptor_header * const *src;
+	static struct usb_endpoint_descriptor *uvc_control_ep;
 	struct usb_descriptor_header **dst;
 	struct usb_descriptor_header **hdr;
 	unsigned int control_size;
@@ -381,10 +463,29 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	unsigned int bytes;
 	void *mem;
 
-	uvc_streaming_cls = (speed == USB_SPEED_FULL)
-			  ? uvc->desc.fs_streaming : uvc->desc.hs_streaming;
-	uvc_streaming_std = (speed == USB_SPEED_FULL)
-			  ? uvc_fs_streaming : uvc_hs_streaming;
+	switch (speed) {
+	case USB_SPEED_SUPER:
+		uvc_control_desc = uvc->desc.ss_control;
+		uvc_streaming_cls = uvc->desc.ss_streaming;
+		uvc_streaming_std = uvc_ss_streaming;
+		uvc_control_ep = &uvc_ss_control_ep;
+		break;
+
+	case USB_SPEED_HIGH:
+		uvc_control_desc = uvc->desc.fs_control;
+		uvc_streaming_cls = uvc->desc.hs_streaming;
+		uvc_streaming_std = uvc_hs_streaming;
+		uvc_control_ep = &uvc_fs_control_ep;
+		break;
+
+	case USB_SPEED_FULL:
+	default:
+		uvc_control_desc = uvc->desc.fs_control;
+		uvc_streaming_cls = uvc->desc.fs_streaming;
+		uvc_streaming_std = uvc_fs_streaming;
+		uvc_control_ep = &uvc_fs_control_ep;
+		break;
+	}
 
 	/* Descriptors layout
 	 *
@@ -402,16 +503,24 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	control_size = 0;
 	streaming_size = 0;
 	bytes = uvc_iad.bLength + uvc_control_intf.bLength
-	      + uvc_control_ep.bLength + uvc_control_cs_ep.bLength
+	      + uvc_control_ep->bLength + uvc_control_cs_ep.bLength
 	      + uvc_streaming_intf_alt0.bLength;
-	n_desc = 5;
 
-	for (src = (const struct usb_descriptor_header**)uvc->desc.control; *src; ++src) {
+	if (speed == USB_SPEED_SUPER) {
+		bytes += uvc_ss_control_comp.bLength;
+		n_desc = 6;
+	} else {
+		n_desc = 5;
+	}
+
+	for (src = (const struct usb_descriptor_header **)uvc_control_desc;
+			*src; ++src) {
 		control_size += (*src)->bLength;
 		bytes += (*src)->bLength;
 		n_desc++;
 	}
-	for (src = (const struct usb_descriptor_header**)uvc_streaming_cls; *src; ++src) {
+	for (src = (const struct usb_descriptor_header **)uvc_streaming_cls;
+			*src; ++src) {
 		streaming_size += (*src)->bLength;
 		bytes += (*src)->bLength;
 		n_desc++;
@@ -435,12 +544,15 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 
 	uvc_control_header = mem;
 	UVC_COPY_DESCRIPTORS(mem, dst,
-		(const struct usb_descriptor_header**)uvc->desc.control);
+		(const struct usb_descriptor_header **)uvc_control_desc);
 	uvc_control_header->wTotalLength = cpu_to_le16(control_size);
 	uvc_control_header->bInCollection = 1;
 	uvc_control_header->baInterfaceNr[0] = uvc->streaming_intf;
 
-	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_ep);
+	UVC_COPY_DESCRIPTOR(mem, dst, uvc_control_ep);
+	if (speed == USB_SPEED_SUPER)
+		UVC_COPY_DESCRIPTOR(mem, dst, &uvc_ss_control_comp);
+
 	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_cs_ep);
 	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_streaming_intf_alt0);
 
@@ -448,7 +560,8 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	UVC_COPY_DESCRIPTORS(mem, dst,
 		(const struct usb_descriptor_header**)uvc_streaming_cls);
 	uvc_streaming_header->wTotalLength = cpu_to_le16(streaming_size);
-	uvc_streaming_header->bEndpointAddress = uvc_streaming_ep.bEndpointAddress;
+	uvc_streaming_header->bEndpointAddress =
+		uvc_fs_streaming_ep.bEndpointAddress;
 
 	UVC_COPY_DESCRIPTORS(mem, dst, uvc_streaming_std);
 
@@ -484,6 +597,7 @@ uvc_function_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	kfree(f->descriptors);
 	kfree(f->hs_descriptors);
+	kfree(f->ss_descriptors);
 
 	kfree(uvc);
 }
@@ -498,8 +612,26 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 
 	INFO(cdev, "uvc_function_bind\n");
 
+	/* sanity check the streaming endpoint module parameters */
+	if (streaming_interval < 1)
+		streaming_interval = 1;
+	if (streaming_interval > 16)
+		streaming_interval = 16;
+	if (streaming_mult > 2)
+		streaming_mult = 2;
+	if (streaming_maxburst > 15)
+		streaming_maxburst = 15;
+
+	/*
+	 * fill in the FS video streaming specific descriptors from the
+	 * module parameters
+	 */
+	uvc_fs_streaming_ep.wMaxPacketSize = streaming_maxpacket > 1023 ?
+						1023 : streaming_maxpacket;
+	uvc_fs_streaming_ep.bInterval = streaming_interval;
+
 	/* Allocate endpoints. */
-	ep = usb_ep_autoconfig(cdev->gadget, &uvc_control_ep);
+	ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_control_ep);
 	if (!ep) {
 		INFO(cdev, "Unable to allocate control EP\n");
 		goto error;
@@ -507,7 +639,7 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	uvc->control_ep = ep;
 	ep->driver_data = uvc;
 
-	ep = usb_ep_autoconfig(cdev->gadget, &uvc_streaming_ep);
+	ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_streaming_ep);
 	if (!ep) {
 		INFO(cdev, "Unable to allocate streaming EP\n");
 		goto error;
@@ -528,9 +660,52 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	uvc_streaming_intf_alt1.bInterfaceNumber = ret;
 	uvc->streaming_intf = ret;
 
-	/* Copy descriptors. */
+	/* sanity check the streaming endpoint module parameters */
+	if (streaming_maxpacket > 1024)
+		streaming_maxpacket = 1024;
+
+	/* Copy descriptors for FS. */
 	f->descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL);
-	f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH);
+
+	/* support high speed hardware */
+	if (gadget_is_dualspeed(cdev->gadget)) {
+		/*
+		 * Fill in the HS descriptors from the module parameters for the
+		 * Video Streaming endpoint.
+		 * NOTE: We assume that the user knows what they are doing and
+		 * won't give parameters that their UDC doesn't support.
+		 */
+		uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket;
+		uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11;
+		uvc_hs_streaming_ep.bInterval = streaming_interval;
+		uvc_hs_streaming_ep.bEndpointAddress =
+				uvc_fs_streaming_ep.bEndpointAddress;
+
+		/* Copy descriptors. */
+		f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH);
+	}
+
+	/* support super speed hardware */
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		/*
+		 * Fill in the SS descriptors from the module parameters for the
+		 * Video Streaming endpoint.
+		 * NOTE: We assume that the user knows what they are doing and
+		 * won't give parameters that their UDC doesn't support.
+		 */
+		uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket;
+		uvc_ss_streaming_ep.bInterval = streaming_interval;
+		uvc_ss_streaming_comp.bmAttributes = streaming_mult;
+		uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst;
+		uvc_ss_streaming_comp.wBytesPerInterval =
+			streaming_maxpacket * (streaming_mult + 1) *
+			(streaming_maxburst + 1);
+		uvc_ss_streaming_ep.bEndpointAddress =
+				uvc_fs_streaming_ep.bEndpointAddress;
+
+		/* Copy descriptors. */
+		f->ss_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_SUPER);
+	}
 
 	/* Preallocate control endpoint request. */
 	uvc->control_req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
@@ -585,9 +760,11 @@ error:
  */
 int __init
 uvc_bind_config(struct usb_configuration *c,
-		const struct uvc_descriptor_header * const *control,
+		const struct uvc_descriptor_header * const *fs_control,
+		const struct uvc_descriptor_header * const *ss_control,
 		const struct uvc_descriptor_header * const *fs_streaming,
-		const struct uvc_descriptor_header * const *hs_streaming)
+		const struct uvc_descriptor_header * const *hs_streaming,
+		const struct uvc_descriptor_header * const *ss_streaming)
 {
 	struct uvc_device *uvc;
 	int ret = 0;
@@ -605,21 +782,31 @@ uvc_bind_config(struct usb_configuration *c,
 	uvc->state = UVC_STATE_DISCONNECTED;
 
 	/* Validate the descriptors. */
-	if (control == NULL || control[0] == NULL ||
-	    control[0]->bDescriptorSubType != UVC_VC_HEADER)
+	if (fs_control == NULL || fs_control[0] == NULL ||
+		fs_control[0]->bDescriptorSubType != UVC_VC_HEADER)
+		goto error;
+
+	if (ss_control == NULL || ss_control[0] == NULL ||
+		ss_control[0]->bDescriptorSubType != UVC_VC_HEADER)
 		goto error;
 
 	if (fs_streaming == NULL || fs_streaming[0] == NULL ||
-	    fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
+		fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
 		goto error;
 
 	if (hs_streaming == NULL || hs_streaming[0] == NULL ||
-	    hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
+		hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
+		goto error;
+
+	if (ss_streaming == NULL || ss_streaming[0] == NULL ||
+		ss_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
 		goto error;
 
-	uvc->desc.control = control;
+	uvc->desc.fs_control = fs_control;
+	uvc->desc.ss_control = ss_control;
 	uvc->desc.fs_streaming = fs_streaming;
 	uvc->desc.hs_streaming = hs_streaming;
+	uvc->desc.ss_streaming = ss_streaming;
 
 	/* maybe allocate device-global string IDs, and patch descriptors */
 	if (uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id == 0) {
diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h
index abf83293513..c3d258d3018 100644
--- a/drivers/usb/gadget/f_uvc.h
+++ b/drivers/usb/gadget/f_uvc.h
@@ -17,9 +17,11 @@
 #include <linux/usb/video.h>
 
 extern int uvc_bind_config(struct usb_configuration *c,
-			   const struct uvc_descriptor_header * const *control,
-			   const struct uvc_descriptor_header * const *fs_streaming,
-			   const struct uvc_descriptor_header * const *hs_streaming);
+		   const struct uvc_descriptor_header * const *fs_control,
+		   const struct uvc_descriptor_header * const *hs_control,
+		   const struct uvc_descriptor_header * const *fs_streaming,
+		   const struct uvc_descriptor_header * const *hs_streaming,
+		   const struct uvc_descriptor_header * const *ss_streaming);
 
 #endif /* _F_UVC_H_ */
 
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index ca4e03a1c73..93b0c119111 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -153,9 +153,11 @@ struct uvc_device
 
 	/* Descriptors */
 	struct {
-		const struct uvc_descriptor_header * const *control;
+		const struct uvc_descriptor_header * const *fs_control;
+		const struct uvc_descriptor_header * const *ss_control;
 		const struct uvc_descriptor_header * const *fs_streaming;
 		const struct uvc_descriptor_header * const *hs_streaming;
+		const struct uvc_descriptor_header * const *ss_streaming;
 	} desc;
 
 	unsigned int control_intf;
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 668fe128f2e..120e134e805 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -272,7 +272,15 @@ static const struct uvc_color_matching_descriptor uvc_color_matching = {
 	.bMatrixCoefficients	= 4,
 };
 
-static const struct uvc_descriptor_header * const uvc_control_cls[] = {
+static const struct uvc_descriptor_header * const uvc_fs_control_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_control_header,
+	(const struct uvc_descriptor_header *) &uvc_camera_terminal,
+	(const struct uvc_descriptor_header *) &uvc_processing,
+	(const struct uvc_descriptor_header *) &uvc_output_terminal,
+	NULL,
+};
+
+static const struct uvc_descriptor_header * const uvc_ss_control_cls[] = {
 	(const struct uvc_descriptor_header *) &uvc_control_header,
 	(const struct uvc_descriptor_header *) &uvc_camera_terminal,
 	(const struct uvc_descriptor_header *) &uvc_processing,
@@ -304,6 +312,18 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = {
 	NULL,
 };
 
+static const struct uvc_descriptor_header * const uvc_ss_streaming_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_input_header,
+	(const struct uvc_descriptor_header *) &uvc_format_yuv,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_720p,
+	(const struct uvc_descriptor_header *) &uvc_format_mjpg,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p,
+	(const struct uvc_descriptor_header *) &uvc_color_matching,
+	NULL,
+};
+
 /* --------------------------------------------------------------------------
  * USB configuration
  */
@@ -311,8 +331,9 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = {
 static int __init
 webcam_config_bind(struct usb_configuration *c)
 {
-	return uvc_bind_config(c, uvc_control_cls, uvc_fs_streaming_cls,
-			       uvc_hs_streaming_cls);
+	return uvc_bind_config(c, uvc_fs_control_cls, uvc_ss_control_cls,
+		uvc_fs_streaming_cls, uvc_hs_streaming_cls,
+		uvc_ss_streaming_cls);
 }
 
 static struct usb_configuration webcam_config_driver = {
@@ -373,7 +394,7 @@ static struct usb_composite_driver webcam_driver = {
 	.name		= "g_webcam",
 	.dev		= &webcam_device_descriptor,
 	.strings	= webcam_device_strings,
-	.max_speed	= USB_SPEED_HIGH,
+	.max_speed	= USB_SPEED_SUPER,
 	.unbind		= webcam_unbind,
 };
 
-- 
cgit v1.2.3-70-g09d2


From b785ea7ce662c47f6208071320638a4813722803 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Wed, 6 Jun 2012 10:20:23 +0300
Subject: usb: gadget: composite: fix ep->maxburst initialization

bMaxBurst field on endpoint companion descriptor
is supposed to contain the number of burst minus
1. When passing that to controller drivers, we
should be passing the real number instead (by
incrementing 1).

While doing that, also fix the assumption on
dwc3 that value comes decremented by one.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc3/gadget.c      | 2 +-
 drivers/usb/gadget/composite.c | 7 +++++--
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 3df1a1973b0..cc978d65a80 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -414,7 +414,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 
 	params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
 		| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc))
-		| DWC3_DEPCFG_BURST_SIZE(dep->endpoint.maxburst);
+		| DWC3_DEPCFG_BURST_SIZE(dep->endpoint.maxburst - 1);
 
 	params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
 		| DWC3_DEPCFG_XFER_NOT_READY_EN;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 390749bbb0c..3f72110da1b 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -117,6 +117,7 @@ int config_ep_by_speed(struct usb_gadget *g,
 			struct usb_function *f,
 			struct usb_ep *_ep)
 {
+	struct usb_composite_dev	*cdev = get_gadget_data(g);
 	struct usb_endpoint_descriptor *chosen_desc = NULL;
 	struct usb_descriptor_header **speed_desc = NULL;
 
@@ -180,10 +181,12 @@ ep_found:
 			_ep->mult = comp_desc->bmAttributes & 0x3;
 		case USB_ENDPOINT_XFER_BULK:
 		case USB_ENDPOINT_XFER_INT:
-			_ep->maxburst = comp_desc->bMaxBurst;
+			_ep->maxburst = comp_desc->bMaxBurst + 1;
 			break;
 		default:
-			/* Do nothing for control endpoints */
+			if (comp_desc->bMaxBurst != 0)
+				ERROR(cdev, "ep0 bMaxBurst must be 0\n");
+			_ep->maxburst = 1;
 			break;
 		}
 	}
-- 
cgit v1.2.3-70-g09d2


From 1c7f6cd3f97b038e875094a8433e239f03d10955 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Fri, 25 May 2012 20:14:53 -0300
Subject: usb: fsl_mxc_udc.c : Use clk_prepare_enable/clk_disable_unprepare

Prepare the clock before enabling it.

Cc: <linux-usb@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/fsl_mxc_udc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index dcbc0a2e48d..f4b5109feb3 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -40,7 +40,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 		if (IS_ERR(mxc_ahb_clk))
 			return PTR_ERR(mxc_ahb_clk);
 
-		ret = clk_enable(mxc_ahb_clk);
+		ret = clk_prepare_enable(mxc_ahb_clk);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
 			goto eenahb;
@@ -65,7 +65,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 		}
 	}
 
-	ret = clk_enable(mxc_usb_clk);
+	ret = clk_prepare_enable(mxc_usb_clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
 		goto eenusb;
@@ -79,7 +79,7 @@ eclkrate:
 	mxc_usb_clk = NULL;
 egusb:
 	if (!cpu_is_mx35())
-		clk_disable(mxc_ahb_clk);
+		clk_disable_unprepare(mxc_ahb_clk);
 eenahb:
 	if (!cpu_is_mx35())
 		clk_put(mxc_ahb_clk);
@@ -104,7 +104,7 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
 
 	/* ULPI transceivers don't need usbpll */
 	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
-		clk_disable(mxc_usb_clk);
+		clk_disable_unprepare(mxc_usb_clk);
 		clk_put(mxc_usb_clk);
 		mxc_usb_clk = NULL;
 	}
@@ -113,11 +113,11 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
 void fsl_udc_clk_release(void)
 {
 	if (mxc_usb_clk) {
-		clk_disable(mxc_usb_clk);
+		clk_disable_unprepare(mxc_usb_clk);
 		clk_put(mxc_usb_clk);
 	}
 	if (!cpu_is_mx35()) {
-		clk_disable(mxc_ahb_clk);
+		clk_disable_unprepare(mxc_ahb_clk);
 		clk_put(mxc_ahb_clk);
 	}
 }
-- 
cgit v1.2.3-70-g09d2


From 8194fea0fc308a7cdfc9333584d69cb5d428d47f Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Fri, 25 May 2012 20:14:54 -0300
Subject: usb: imx_udc.c: Use clk_prepare_enable/clk_disable_unprepare

Prepare the clock before enabling it.

Cc: <linux-usb@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/imx_udc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 54034f84f99..dc5334856af 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1432,7 +1432,7 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "can't get USB clock\n");
 		goto fail2;
 	}
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 
 	if (clk_get_rate(clk) != 48000000) {
 		D_INI(&pdev->dev,
@@ -1496,7 +1496,7 @@ fail4:
 		free_irq(imx_usb->usbd_int[i], imx_usb);
 fail3:
 	clk_put(clk);
-	clk_disable(clk);
+	clk_disable_unprepare(clk);
 fail2:
 	iounmap(base);
 fail1:
@@ -1521,7 +1521,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
 		free_irq(imx_usb->usbd_int[i], imx_usb);
 
 	clk_put(imx_usb->clk);
-	clk_disable(imx_usb->clk);
+	clk_disable_unprepare(imx_usb->clk);
 	iounmap(imx_usb->base);
 
 	release_mem_region(imx_usb->res->start, resource_size(imx_usb->res));
-- 
cgit v1.2.3-70-g09d2


From 2b97fb5a605635684f757080cdc405d8173838d5 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Fri, 25 May 2012 20:14:55 -0300
Subject: usb: imx21-hcd.c: Use clk_prepare_enable/clk_disable_unprepare

Prepare the clock before enabling it.

Cc: <linux-usb@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/host/imx21-hcd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index ff471c1c165..f19e2690c23 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1811,7 +1811,7 @@ static int imx21_remove(struct platform_device *pdev)
 	usb_remove_hcd(hcd);
 
 	if (res != NULL) {
-		clk_disable(imx21->clk);
+		clk_disable_unprepare(imx21->clk);
 		clk_put(imx21->clk);
 		iounmap(imx21->regs);
 		release_mem_region(res->start, resource_size(res));
@@ -1884,7 +1884,7 @@ static int imx21_probe(struct platform_device *pdev)
 	ret = clk_set_rate(imx21->clk, clk_round_rate(imx21->clk, 48000000));
 	if (ret)
 		goto failed_clock_set;
-	ret = clk_enable(imx21->clk);
+	ret = clk_prepare_enable(imx21->clk);
 	if (ret)
 		goto failed_clock_enable;
 
@@ -1900,7 +1900,7 @@ static int imx21_probe(struct platform_device *pdev)
 	return 0;
 
 failed_add_hcd:
-	clk_disable(imx21->clk);
+	clk_disable_unprepare(imx21->clk);
 failed_clock_enable:
 failed_clock_set:
 	clk_put(imx21->clk);
-- 
cgit v1.2.3-70-g09d2


From 1a12af1a751311e129ff8e8ca18f83613b78a83c Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <mina86@mina86.com>
Date: Tue, 12 Jun 2012 12:42:17 +0200
Subject: usb: gadget: mass_storage: remove unused options

This commit removes thread_name and lun_name_format fields from the
fsg_config structure.  Those fields are not used by any in-tree code
and their usefulness is rather theoretical.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/f_mass_storage.c | 50 ++++++++-----------------------------
 1 file changed, 10 insertions(+), 40 deletions(-)

diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 72116fa49ff..9b29e8eab18 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -75,25 +75,6 @@
  *	->nofua		Flag specifying that FUA flag in SCSI WRITE(10,12)
  *				commands for this LUN shall be ignored.
  *
- *	lun_name_format	A printf-like format for names of the LUN
- *				devices.  This determines how the
- *				directory in sysfs will be named.
- *				Unless you are using several MSFs in
- *				a single gadget (as opposed to single
- *				MSF in many configurations) you may
- *				leave it as NULL (in which case
- *				"lun%d" will be used).  In the format
- *				you can use "%d" to index LUNs for
- *				MSF's with more than one LUN.  (Beware
- *				that there is only one integer given
- *				as an argument for the format and
- *				specifying invalid format may cause
- *				unspecified behaviour.)
- *	thread_name	Name of the kernel thread process used by the
- *				MSF.  You can safely set it to NULL
- *				(in which case default "file-storage"
- *				will be used).
- *
  *	vendor_name
  *	product_name
  *	release		Information used as a reply to INQUIRY
@@ -155,15 +136,14 @@
  * a buffer from being used by more than one endpoint.
  *
  *
- * The pathnames of the backing files and the ro settings are
- * available in the attribute files "file" and "ro" in the lun<n> (or
- * to be more precise in a directory which name comes from
- * "lun_name_format" option!) subdirectory of the gadget's sysfs
- * directory.  If the "removable" option is set, writing to these
- * files will simulate ejecting/loading the medium (writing an empty
- * line means eject) and adjusting a write-enable tab.  Changes to the
- * ro setting are not allowed when the medium is loaded or if CD-ROM
- * emulation is being used.
+ * The pathnames of the backing files, the ro settings and nofua
+ * settings are available in the attribute files "file", "ro" and
+ * "nofua" in the lun<n> subdirectory of the gadget's sysfs directory.
+ * If the "removable" option is set, writing to these files will
+ * simulate ejecting/loading the medium (writing an empty line means
+ * eject) and adjusting a write-enable tab.  Changes to the ro setting
+ * are not allowed when the medium is loaded or if CD-ROM emulation is
+ * being used.
  *
  * When a LUN receive an "eject" SCSI request (Start/Stop Unit),
  * if the LUN is removable, the backing file is released to simulate
@@ -417,9 +397,6 @@ struct fsg_config {
 		char nofua;
 	} luns[FSG_MAX_LUNS];
 
-	const char		*lun_name_format;
-	const char		*thread_name;
-
 	/* Callback functions. */
 	const struct fsg_operations	*ops;
 	/* Gadget's private data. */
@@ -2792,11 +2769,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 		curlun->dev.parent = &gadget->dev;
 		/* curlun->dev.driver = &fsg_driver.driver; XXX */
 		dev_set_drvdata(&curlun->dev, &common->filesem);
-		dev_set_name(&curlun->dev,
-			     cfg->lun_name_format
-			   ? cfg->lun_name_format
-			   : "lun%d",
-			     i);
+		dev_set_name(&curlun->dev, "lun%d", i);
 
 		rc = device_register(&curlun->dev);
 		if (rc) {
@@ -2878,8 +2851,7 @@ buffhds_first_it:
 
 	/* Tell the thread to start working */
 	common->thread_task =
-		kthread_create(fsg_main_thread, common,
-			       cfg->thread_name ?: "file-storage");
+		kthread_create(fsg_main_thread, common, "file-storage");
 	if (IS_ERR(common->thread_task)) {
 		rc = PTR_ERR(common->thread_task);
 		goto error_release;
@@ -3175,8 +3147,6 @@ fsg_config_from_params(struct fsg_config *cfg,
 	}
 
 	/* Let MSF use defaults */
-	cfg->lun_name_format = 0;
-	cfg->thread_name = 0;
 	cfg->vendor_name = 0;
 	cfg->product_name = 0;
 	cfg->release = 0xffff;
-- 
cgit v1.2.3-70-g09d2


From a8287a4ed543494c121050dc453972902637e6de Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <mina86@mina86.com>
Date: Tue, 12 Jun 2012 12:42:18 +0200
Subject: usb: gadget: mass_storage: add documentation

This commit adds Documentation/usb/mass-storage.txt file.  It contains
description of how to use the mass storage gadget from user space.  It
elaborates on madule parameters and sysfs interface more then it was
written in the comments in the source code.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 Documentation/usb/mass-storage.txt  | 226 ++++++++++++++++++++++++++++++++++++
 drivers/usb/gadget/f_mass_storage.c |  69 ++---------
 2 files changed, 233 insertions(+), 62 deletions(-)
 create mode 100644 Documentation/usb/mass-storage.txt

diff --git a/Documentation/usb/mass-storage.txt b/Documentation/usb/mass-storage.txt
new file mode 100644
index 00000000000..e9b9334627b
--- /dev/null
+++ b/Documentation/usb/mass-storage.txt
@@ -0,0 +1,226 @@
+* Overview
+
+  Mass Storage Gadget (or MSG) acts as a USB Mass Storage device,
+  appearing to the host as a disk or a CD-ROM drive.  It supports
+  multiple logical units (LUNs).  Backing storage for each LUN is
+  provided by a regular file or a block device, access can be limited
+  to read-only, and gadget can indicate that it is removable and/or
+  CD-ROM (the latter implies read-only access).
+
+  Its requirements are modest; only a bulk-in and a bulk-out endpoint
+  are needed.  The memory requirement amounts to two 16K buffers.
+  Support is included for full-speed, high-speed and SuperSpeed
+  operation.
+
+  Note that the driver is slightly non-portable in that it assumes
+  a single memory/DMA buffer will be useable for bulk-in and bulk-out
+  endpoints.  With most device controllers this is not an issue, but
+  there may be some with hardware restrictions that prevent a buffer
+  from being used by more than one endpoint.
+
+  This document describes how to use the gadget from user space, its
+  relation to mass storage function (or MSF) and different gadgets
+  using it, and how it differs from File Storage Gadget (or FSG).  It
+  will talk only briefly about how to use MSF within composite
+  gadgets.
+
+* Module parameters
+
+  The mass storage gadget accepts the following mass storage specific
+  module parameters:
+
+  - file=filename[,filename...]
+
+    This parameter lists paths to files or block devices used for
+    backing storage for each logical unit.  There may be at most
+    FSG_MAX_LUNS (8) LUNs set.  If more files are specified, they will
+    be silently ignored.  See also “luns” parameter.
+
+    *BEWARE* that if a file is used as a backing storage, it may not
+    be modified by any other process.  This is because the host
+    assumes the data does not change without its knowledge.  It may be
+    read, but (if the logical unit is writable) due to buffering on
+    the host side, the contents are not well defined.
+
+    The size of the logical unit will be rounded down to a full
+    logical block.  The logical block size is 2048 bytes for LUNs
+    simulating CD-ROM, block size of the device if the backing file is
+    a block device, or 512 bytes otherwise.
+
+  - removable=b[,b...]
+
+    This parameter specifies whether each logical unit should be
+    removable.  “b” here is either “y”, “Y” or “1” for true or “n”,
+    “N” or “0” for false.
+
+    If this option is set for a logical unit, gadget will accept an
+    “eject” SCSI request (Start/Stop Unit).  When it is sent, the
+    backing file will be closed to simulate ejection and the logical
+    unit will not be mountable by the host until a new backing file is
+    specified by userspace on the device (see “sysfs entries”
+    section).
+
+    If a logical unit is not removable (the default), a backing file
+    must be specified for it with the “file” parameter as the module
+    is loaded.  The same applies if the module is built in, no
+    exceptions.
+
+    The default value of the flag is false, *HOWEVER* it used to be
+    true.  This has been changed to better match File Storage Gadget
+    and because it seems like a saner default after all.  Thus to
+    maintain compatibility with older kernels, it's best to specify
+    the default values.  Also, if one relied on old default, explicit
+    “n” needs to be specified now.
+
+    Note that “removable” means the logical unit's media can be
+    ejected or removed (as is true for a CD-ROM drive or a card
+    reader).  It does *not* mean that the entire gadget can be
+    unplugged from the host; the proper term for that is
+    “hot-unpluggable”.
+
+  - cdrom=b[,b...]
+
+    This parameter specifies whether each logical unit should simulate
+    CD-ROM.  The default is false.
+
+  - ro=b[,b...]
+
+    This parameter specifies whether each logical unit should be
+    reported as read only.  This will prevent host from modifying the
+    backing files.
+
+    Note that if this flag for given logical unit is false but the
+    backing file could not be opened in read/write mode, the gadget
+    will fall back to read only mode anyway.
+
+    The default value for non-CD-ROM logical units is false; for
+    logical units simulating CD-ROM it is forced to true.
+
+  - nofua=b[,b...]
+
+    This parameter specifies whether FUA flag should be ignored in SCSI
+    Write10 and Write12 commands sent to given logical units.
+
+    MS Windows mounts removable storage in “Removal optimised mode” by
+    default.  All the writes to the media are synchronous, which is
+    achieved by setting the FUA (Force Unit Access) bit in SCSI
+    Write(10,12) commands.  This forces each write to wait until the
+    data has actually been written out and prevents I/O requests
+    aggregation in block layer dramatically decreasing performance.
+
+    Note that this may mean that if the device is powered from USB and
+    the user unplugs the device without unmounting it first (which at
+    least some Windows users do), the data may be lost.
+
+    The default value is false.
+
+  - luns=N
+
+    This parameter specifies number of logical units the gadget will
+    have.  It is limited by FSG_MAX_LUNS (8) and higher value will be
+    capped.
+
+    If this parameter is provided, and the number of files specified
+    in “file” argument is greater then the value of “luns”, all excess
+    files will be ignored.
+
+    If this parameter is not present, the number of logical units will
+    be deduced from the number of files specified in the “file”
+    parameter.  If the file parameter is missing as well, one is
+    assumed.
+
+  - stall=b
+
+    Specifies whether the gadget is allowed to halt bulk endpoints.
+    The default is determined according to the type of USB device
+    controller, but usually true.
+
+  In addition to the above, the gadget also accepts the following
+  parameters defined by the composite framework (they are common to
+  all composite gadgets so just a quick listing):
+
+  - idVendor      -- USB Vendor ID (16 bit integer)
+  - idProduct     -- USB Product ID (16 bit integer)
+  - bcdDevice     -- USB Device version (BCD) (16 bit integer)
+  - iManufacturer -- USB Manufacturer string (string)
+  - iProduct      -- USB Product string (string)
+  - iSerialNumber -- SerialNumber string (sting)
+
+* sysfs entries
+
+  For each logical unit, the gadget creates a directory in the sysfs
+  hierarchy.  Inside of it the following three files are created:
+
+  - file
+
+    When read it returns the path to the backing file for the given
+    logical unit.  If there is no backing file (possible only if the
+    logical unit is removable), the content is empty.
+
+    When written into, it changes the backing file for given logical
+    unit.  This change can be performed even if given logical unit is
+    not specified as removable (but that may look strange to the
+    host).  It may fail, however, if host disallowed medium removal
+    with the Prevent-Allow Medium Removal SCSI command.
+
+  - ro
+
+    Reflects the state of ro flag for the given logical unit.  It can
+    be read any time, and written to when there is no backing file
+    open for given logical unit.
+
+  - nofua
+
+    Reflects the state of nofua flag for given logical unit.  It can
+    be read and written.
+
+  Other then those, as usual, the values of module parameters can be
+  read from /sys/module/g_mass_storage/parameters/* files.
+
+* Other gadgets using mass storage function
+
+  The Mass Storage Gadget uses the Mass Storage Function to handle
+  mass storage protocol.  As a composite function, MSF may be used by
+  other gadgets as well (eg. g_multi and acm_ms).
+
+  All of the information in previous sections are valid for other
+  gadgets using MSF, except that support for mass storage related
+  module parameters may be missing, or the parameters may have
+  a prefix.  To figure out whether any of this is true one needs to
+  consult the gadget's documentation or its source code.
+
+  For examples of how to include mass storage function in gadgets, one
+  may take a look at mass_storage.c, acm_ms.c and multi.c (sorted by
+  complexity).
+
+* Relation to file storage gadget
+
+  The Mass Storage Function and thus the Mass Storage Gadget has been
+  based on the File Storage Gadget.  The difference between the two is
+  that MSG is a composite gadget (ie. uses the composite framework)
+  while file storage gadget is a traditional gadget.  From userspace
+  point of view this distinction does not really matter, but from
+  kernel hacker's point of view, this means that (i) MSG does not
+  duplicate code needed for handling basic USB protocol commands and
+  (ii) MSF can be used in any other composite gadget.
+
+  Because of that, File Storage Gadget has been deprecated and
+  scheduled to be removed in Linux 3.8.  All users need to transition
+  to the Mass Storage Gadget by that time.  The two gadgets behave
+  mostly the same from the outside except:
+
+  1. In FSG the “removable” and “cdrom” module parameters set the flag
+     for all logical units whereas in MSG they accept a list of y/n
+     values for each logical unit.  If one uses only a single logical
+     unit this does not matter, but if there are more, the y/n value
+     needs to be repeated for each logical unit.
+
+  2. FSG's “serial”, “vendor”, “product” and “release” module
+     parameters are handled in MSG by the composite layer's parameters
+     named respectively: “iSerialnumber”, “idVendor”, “idProduct” and
+     “bcdDevice”.
+
+  3. MSG does not support FSG's test mode, thus “transport”,
+     “protocol” and “buflen” FSG's module parameters are not
+     supported.  MSG always uses SCSI protocol with bulk only
+     transport mode and 16 KiB buffers.
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 9b29e8eab18..7ad4f819752 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -44,12 +44,12 @@
  * function for a USB device, it also illustrates a technique of
  * double-buffering for increased throughput.
  *
- * Function supports multiple logical units (LUNs).  Backing storage
- * for each LUN is provided by a regular file or a block device.
- * Access for each LUN can be limited to read-only.  Moreover, the
- * function can indicate that LUN is removable and/or CD-ROM.  (The
- * later implies read-only access.)
- *
+ * For more information about MSF and in particular its module
+ * parameters and sysfs interface read the
+ * <Documentation/usb/mass-storage.txt> file.
+ */
+
+/*
  * MSF is configured by specifying a fsg_config structure.  It has the
  * following fields:
  *
@@ -95,61 +95,6 @@
  * data track and no audio tracks; hence there need be only one
  * backing file per LUN.
  *
- *
- * MSF includes support for module parameters.  If gadget using it
- * decides to use it, the following module parameters will be
- * available:
- *
- *	file=filename[,filename...]
- *			Names of the files or block devices used for
- *				backing storage.
- *	ro=b[,b...]	Default false, boolean for read-only access.
- *	removable=b[,b...]
- *			Default false, boolean for removable media.
- *	cdrom=b[,b...]	Default false, boolean for whether to emulate
- *				a CD-ROM drive.
- *	nofua=b[,b...]	Default false, booleans for ignore FUA flag
- *				in SCSI WRITE(10,12) commands
- *	luns=N		Default N = number of filenames, number of
- *				LUNs to support.
- *	stall		Default determined according to the type of
- *				USB device controller (usually true),
- *				boolean to permit the driver to halt
- *				bulk endpoints.
- *
- * The module parameters may be prefixed with some string.  You need
- * to consult gadget's documentation or source to verify whether it is
- * using those module parameters and if it does what are the prefixes
- * (look for FSG_MODULE_PARAMETERS() macro usage, what's inside it is
- * the prefix).
- *
- *
- * Requirements are modest; only a bulk-in and a bulk-out endpoint are
- * needed.  The memory requirement amounts to two 16K buffers, size
- * configurable by a parameter.  Support is included for both
- * full-speed and high-speed operation.
- *
- * Note that the driver is slightly non-portable in that it assumes a
- * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
- * interrupt-in endpoints.  With most device controllers this isn't an
- * issue, but there may be some with hardware restrictions that prevent
- * a buffer from being used by more than one endpoint.
- *
- *
- * The pathnames of the backing files, the ro settings and nofua
- * settings are available in the attribute files "file", "ro" and
- * "nofua" in the lun<n> subdirectory of the gadget's sysfs directory.
- * If the "removable" option is set, writing to these files will
- * simulate ejecting/loading the medium (writing an empty line means
- * eject) and adjusting a write-enable tab.  Changes to the ro setting
- * are not allowed when the medium is loaded or if CD-ROM emulation is
- * being used.
- *
- * When a LUN receive an "eject" SCSI request (Start/Stop Unit),
- * if the LUN is removable, the backing file is released to simulate
- * ejection.
- *
- *
  * This function is heavily based on "File-backed Storage Gadget" by
  * Alan Stern which in turn is heavily based on "Gadget Zero" by David
  * Brownell.  The driver's SCSI command interface was based on the
@@ -191,7 +136,7 @@
  * In normal operation the main thread is started during the gadget's
  * fsg_bind() callback and stopped during fsg_unbind().  But it can
  * also exit when it receives a signal, and there's no point leaving
- * the gadget running when the thread is dead.  At of this moment, MSF
+ * the gadget running when the thread is dead.  As of this moment, MSF
  * provides no way to deregister the gadget when thread dies -- maybe
  * a callback functions is needed.
  *
-- 
cgit v1.2.3-70-g09d2


From 99c515005857ff7d6cd5c2ba272ccab5dc0ea648 Mon Sep 17 00:00:00 2001
From: Daniel Mack <zonque@gmail.com>
Date: Wed, 13 Jun 2012 12:54:45 +0200
Subject: usb: gadget: hidg: register OUT INT endpoint for SET_REPORT

The hidg function driver currently handles its SET_REPORT calls via EP0.
This is the implicit behaviour when no OUT interrupt endpoint is
configured and generally works fine.

The problem is that due to EP0's role in the gadget framework, we cannot
hold back packets and control traffic flow to sync it to the char device,
and hence there's a high risk of loosing packets with this
implementation.

This patch adds an OUT interrupt endpoint to the interface and queues a
fix number of request to catch SET_REPORT events. According to the
specs, host drivers should always use the dedicated OUT endpoint when
present.

The char device's read implementation was rewritten to retrieve data
from the list of completed output requests.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/f_hid.c | 208 +++++++++++++++++++++++++++++++++++----------
 1 file changed, 165 insertions(+), 43 deletions(-)

diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 3b3932c5536..16a8b1c15c6 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -26,6 +26,12 @@ static struct class *hidg_class;
 /*-------------------------------------------------------------------------*/
 /*                            HID gadget struct                            */
 
+struct f_hidg_req_list {
+	struct usb_request	*req;
+	unsigned int		pos;
+	struct list_head 	list;
+};
+
 struct f_hidg {
 	/* configuration */
 	unsigned char			bInterfaceSubClass;
@@ -35,10 +41,10 @@ struct f_hidg {
 	unsigned short			report_length;
 
 	/* recv report */
-	char				*set_report_buff;
-	unsigned short			set_report_length;
+	struct list_head		completed_out_req;
 	spinlock_t			spinlock;
 	wait_queue_head_t		read_queue;
+	unsigned int			qlen;
 
 	/* send report */
 	struct mutex			lock;
@@ -49,7 +55,9 @@ struct f_hidg {
 	int				minor;
 	struct cdev			cdev;
 	struct usb_function		func;
+
 	struct usb_ep			*in_ep;
+	struct usb_ep			*out_ep;
 };
 
 static inline struct f_hidg *func_to_hidg(struct usb_function *f)
@@ -65,7 +73,7 @@ static struct usb_interface_descriptor hidg_interface_desc = {
 	.bDescriptorType	= USB_DT_INTERFACE,
 	/* .bInterfaceNumber	= DYNAMIC */
 	.bAlternateSetting	= 0,
-	.bNumEndpoints		= 1,
+	.bNumEndpoints		= 2,
 	.bInterfaceClass	= USB_CLASS_HID,
 	/* .bInterfaceSubClass	= DYNAMIC */
 	/* .bInterfaceProtocol	= DYNAMIC */
@@ -96,10 +104,23 @@ static struct usb_endpoint_descriptor hidg_hs_in_ep_desc = {
 				      */
 };
 
+static struct usb_endpoint_descriptor hidg_hs_out_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 4, /* FIXME: Add this field in the
+				      * HID gadget configuration?
+				      * (struct hidg_func_descriptor)
+				      */
+};
+
 static struct usb_descriptor_header *hidg_hs_descriptors[] = {
 	(struct usb_descriptor_header *)&hidg_interface_desc,
 	(struct usb_descriptor_header *)&hidg_desc,
 	(struct usb_descriptor_header *)&hidg_hs_in_ep_desc,
+	(struct usb_descriptor_header *)&hidg_hs_out_ep_desc,
 	NULL,
 };
 
@@ -117,10 +138,23 @@ static struct usb_endpoint_descriptor hidg_fs_in_ep_desc = {
 				       */
 };
 
+static struct usb_endpoint_descriptor hidg_fs_out_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 10, /* FIXME: Add this field in the
+				       * HID gadget configuration?
+				       * (struct hidg_func_descriptor)
+				       */
+};
+
 static struct usb_descriptor_header *hidg_fs_descriptors[] = {
 	(struct usb_descriptor_header *)&hidg_interface_desc,
 	(struct usb_descriptor_header *)&hidg_desc,
 	(struct usb_descriptor_header *)&hidg_fs_in_ep_desc,
+	(struct usb_descriptor_header *)&hidg_fs_out_ep_desc,
 	NULL,
 };
 
@@ -130,9 +164,11 @@ static struct usb_descriptor_header *hidg_fs_descriptors[] = {
 static ssize_t f_hidg_read(struct file *file, char __user *buffer,
 			size_t count, loff_t *ptr)
 {
-	struct f_hidg	*hidg     = file->private_data;
-	char		*tmp_buff = NULL;
-	unsigned long	flags;
+	struct f_hidg *hidg = file->private_data;
+	struct f_hidg_req_list *list;
+	struct usb_request *req;
+	unsigned long flags;
+	int ret;
 
 	if (!count)
 		return 0;
@@ -142,8 +178,9 @@ static ssize_t f_hidg_read(struct file *file, char __user *buffer,
 
 	spin_lock_irqsave(&hidg->spinlock, flags);
 
-#define READ_COND (hidg->set_report_buff != NULL)
+#define READ_COND (!list_empty(&hidg->completed_out_req))
 
+	/* wait for at least one buffer to complete */
 	while (!READ_COND) {
 		spin_unlock_irqrestore(&hidg->spinlock, flags);
 		if (file->f_flags & O_NONBLOCK)
@@ -155,19 +192,34 @@ static ssize_t f_hidg_read(struct file *file, char __user *buffer,
 		spin_lock_irqsave(&hidg->spinlock, flags);
 	}
 
-
-	count = min_t(unsigned, count, hidg->set_report_length);
-	tmp_buff = hidg->set_report_buff;
-	hidg->set_report_buff = NULL;
-
+	/* pick the first one */
+	list = list_first_entry(&hidg->completed_out_req,
+				struct f_hidg_req_list, list);
+	req = list->req;
+	count = min_t(unsigned int, count, req->actual - list->pos);
 	spin_unlock_irqrestore(&hidg->spinlock, flags);
 
-	if (tmp_buff != NULL) {
-		/* copy to user outside spinlock */
-		count -= copy_to_user(buffer, tmp_buff, count);
-		kfree(tmp_buff);
-	} else
-		count = -ENOMEM;
+	/* copy to user outside spinlock */
+	count -= copy_to_user(buffer, req->buf + list->pos, count);
+	list->pos += count;
+
+	/*
+	 * if this request is completely handled and transfered to
+	 * userspace, remove its entry from the list and requeue it
+	 * again. Otherwise, we will revisit it again upon the next
+	 * call, taking into account its current read position.
+	 */
+	if (list->pos == req->actual) {
+		spin_lock_irqsave(&hidg->spinlock, flags);
+		list_del(&list->list);
+		kfree(list);
+		spin_unlock_irqrestore(&hidg->spinlock, flags);
+
+		req->length = hidg->report_length;
+		ret = usb_ep_queue(hidg->out_ep, req, GFP_KERNEL);
+		if (ret < 0)
+			return ret;
+	}
 
 	return count;
 }
@@ -282,28 +334,37 @@ static int f_hidg_open(struct inode *inode, struct file *fd)
 /*-------------------------------------------------------------------------*/
 /*                                usb_function                             */
 
-static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req)
+static struct usb_request *hidg_alloc_ep_req(struct usb_ep *ep, unsigned length)
 {
-	struct f_hidg *hidg = (struct f_hidg *)req->context;
-
-	if (req->status != 0 || req->buf == NULL || req->actual == 0) {
-		ERROR(hidg->func.config->cdev, "%s FAILED\n", __func__);
-		return;
+	struct usb_request *req;
+
+	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+	if (req) {
+		req->length = length;
+		req->buf = kmalloc(length, GFP_ATOMIC);
+		if (!req->buf) {
+			usb_ep_free_request(ep, req);
+			req = NULL;
+		}
 	}
+	return req;
+}
 
-	spin_lock(&hidg->spinlock);
-
-	hidg->set_report_buff = krealloc(hidg->set_report_buff,
-					 req->actual, GFP_ATOMIC);
+static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_hidg *hidg = (struct f_hidg *) req->context;
+	struct f_hidg_req_list *req_list;
+	unsigned long flags;
 
-	if (hidg->set_report_buff == NULL) {
-		spin_unlock(&hidg->spinlock);
+	req_list = kzalloc(sizeof(*req_list), GFP_ATOMIC);
+	if (!req_list)
 		return;
-	}
-	hidg->set_report_length = req->actual;
-	memcpy(hidg->set_report_buff, req->buf, req->actual);
 
-	spin_unlock(&hidg->spinlock);
+	req_list->req = req;
+
+	spin_lock_irqsave(&hidg->spinlock, flags);
+	list_add_tail(&req_list->list, &hidg->completed_out_req);
+	spin_unlock_irqrestore(&hidg->spinlock, flags);
 
 	wake_up(&hidg->read_queue);
 }
@@ -344,9 +405,7 @@ static int hidg_setup(struct usb_function *f,
 	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
 		  | HID_REQ_SET_REPORT):
 		VDBG(cdev, "set_report | wLenght=%d\n", ctrl->wLength);
-		req->context  = hidg;
-		req->complete = hidg_set_report_complete;
-		goto respond;
+		goto stall;
 		break;
 
 	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
@@ -403,16 +462,25 @@ respond:
 static void hidg_disable(struct usb_function *f)
 {
 	struct f_hidg *hidg = func_to_hidg(f);
+	struct f_hidg_req_list *list, *next;
 
 	usb_ep_disable(hidg->in_ep);
 	hidg->in_ep->driver_data = NULL;
+
+	usb_ep_disable(hidg->out_ep);
+	hidg->out_ep->driver_data = NULL;
+
+	list_for_each_entry_safe(list, next, &hidg->completed_out_req, list) {
+		list_del(&list->list);
+		kfree(list);
+	}
 }
 
 static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct usb_composite_dev		*cdev = f->config->cdev;
 	struct f_hidg				*hidg = func_to_hidg(f);
-	int status = 0;
+	int i, status = 0;
 
 	VDBG(cdev, "hidg_set_alt intf:%d alt:%d\n", intf, alt);
 
@@ -429,11 +497,55 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		}
 		status = usb_ep_enable(hidg->in_ep);
 		if (status < 0) {
-			ERROR(cdev, "Enable endpoint FAILED!\n");
+			ERROR(cdev, "Enable IN endpoint FAILED!\n");
 			goto fail;
 		}
 		hidg->in_ep->driver_data = hidg;
 	}
+
+
+	if (hidg->out_ep != NULL) {
+		/* restart endpoint */
+		if (hidg->out_ep->driver_data != NULL)
+			usb_ep_disable(hidg->out_ep);
+
+		status = config_ep_by_speed(f->config->cdev->gadget, f,
+					    hidg->out_ep);
+		if (status) {
+			ERROR(cdev, "config_ep_by_speed FAILED!\n");
+			goto fail;
+		}
+		status = usb_ep_enable(hidg->out_ep);
+		if (status < 0) {
+			ERROR(cdev, "Enable IN endpoint FAILED!\n");
+			goto fail;
+		}
+		hidg->out_ep->driver_data = hidg;
+
+		/*
+		 * allocate a bunch of read buffers and queue them all at once.
+		 */
+		for (i = 0; i < hidg->qlen && status == 0; i++) {
+			struct usb_request *req =
+					hidg_alloc_ep_req(hidg->out_ep,
+							  hidg->report_length);
+			if (req) {
+				req->complete = hidg_set_report_complete;
+				req->context  = hidg;
+				status = usb_ep_queue(hidg->out_ep, req,
+						      GFP_ATOMIC);
+				if (status)
+					ERROR(cdev, "%s queue req --> %d\n",
+						hidg->out_ep->name, status);
+			} else {
+				usb_ep_disable(hidg->out_ep);
+				hidg->out_ep->driver_data = NULL;
+				status = -ENOMEM;
+				goto fail;
+			}
+		}
+	}
+
 fail:
 	return status;
 }
@@ -470,13 +582,18 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	ep->driver_data = c->cdev;	/* claim */
 	hidg->in_ep = ep;
 
+	ep = usb_ep_autoconfig(c->cdev->gadget, &hidg_fs_out_ep_desc);
+	if (!ep)
+		goto fail;
+	ep->driver_data = c->cdev;	/* claim */
+	hidg->out_ep = ep;
+
 	/* preallocate request and buffer */
 	status = -ENOMEM;
 	hidg->req = usb_ep_alloc_request(hidg->in_ep, GFP_KERNEL);
 	if (!hidg->req)
 		goto fail;
 
-
 	hidg->req->buf = kmalloc(hidg->report_length, GFP_KERNEL);
 	if (!hidg->req->buf)
 		goto fail;
@@ -486,12 +603,12 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol;
 	hidg_hs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
 	hidg_fs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	hidg_hs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	hidg_fs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
 	hidg_desc.desc[0].bDescriptorType = HID_DT_REPORT;
 	hidg_desc.desc[0].wDescriptorLength =
 		cpu_to_le16(hidg->report_desc_length);
 
-	hidg->set_report_buff = NULL;
-
 	/* copy descriptors */
 	f->descriptors = usb_copy_descriptors(hidg_fs_descriptors);
 	if (!f->descriptors)
@@ -500,6 +617,8 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	if (gadget_is_dualspeed(c->cdev->gadget)) {
 		hidg_hs_in_ep_desc.bEndpointAddress =
 			hidg_fs_in_ep_desc.bEndpointAddress;
+		hidg_hs_out_ep_desc.bEndpointAddress =
+			hidg_fs_out_ep_desc.bEndpointAddress;
 		f->hs_descriptors = usb_copy_descriptors(hidg_hs_descriptors);
 		if (!f->hs_descriptors)
 			goto fail;
@@ -509,6 +628,7 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	spin_lock_init(&hidg->spinlock);
 	init_waitqueue_head(&hidg->write_queue);
 	init_waitqueue_head(&hidg->read_queue);
+	INIT_LIST_HEAD(&hidg->completed_out_req);
 
 	/* create char device */
 	cdev_init(&hidg->cdev, &f_hidg_fops);
@@ -553,7 +673,6 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f)
 	usb_free_descriptors(f->descriptors);
 
 	kfree(hidg->report_desc);
-	kfree(hidg->set_report_buff);
 	kfree(hidg);
 }
 
@@ -624,6 +743,9 @@ int __init hidg_bind_config(struct usb_configuration *c,
 	hidg->func.disable = hidg_disable;
 	hidg->func.setup   = hidg_setup;
 
+	/* this could me made configurable at some point */
+	hidg->qlen	   = 4;
+
 	status = usb_add_function(c, &hidg->func);
 	if (status)
 		kfree(hidg);
-- 
cgit v1.2.3-70-g09d2


From 22258f4906aa87e0c0debcad22cb292453e2ebfb Mon Sep 17 00:00:00 2001
From: Lukasz Majewski <l.majewski@samsung.com>
Date: Thu, 14 Jun 2012 10:02:24 +0200
Subject: usb: hsotg: samsung: Replace endpoint specific locks with a global
 lock

The endpoint specific locks are replaced with a global lock.
This is crucial for running s3c-hsotg driver on a SMP SoC.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c-hsotg.c | 54 ++++++++++++++++++++++--------------------
 1 file changed, 28 insertions(+), 26 deletions(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index d37585105bb..b10791282f1 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -112,7 +112,6 @@ struct s3c_hsotg_ep {
 	struct s3c_hsotg_req	*req;
 	struct dentry		*debugfs;
 
-	spinlock_t		lock;
 
 	unsigned long		total_data;
 	unsigned int		size_loaded;
@@ -156,6 +155,8 @@ struct s3c_hsotg {
 	struct usb_gadget_driver *driver;
 	struct s3c_hsotg_plat	 *plat;
 
+	spinlock_t              lock;
+
 	void __iomem		*regs;
 	int			irq;
 	struct clk		*clk;
@@ -901,6 +902,8 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
 		ep->name, req, req->length, req->buf, req->no_interrupt,
 		req->zero, req->short_not_ok);
 
+	spin_lock_irqsave(&hs->lock, irqflags);
+
 	/* initialise status of the request */
 	INIT_LIST_HEAD(&hs_req->queue);
 	req->actual = 0;
@@ -913,15 +916,13 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
 			return ret;
 	}
 
-	spin_lock_irqsave(&hs_ep->lock, irqflags);
-
 	first = list_empty(&hs_ep->queue);
 	list_add_tail(&hs_req->queue, &hs_ep->queue);
 
 	if (first)
 		s3c_hsotg_start_req(hs, hs_ep, hs_req, false);
 
-	spin_unlock_irqrestore(&hs_ep->lock, irqflags);
+	spin_unlock_irqrestore(&hs->lock, irqflags);
 
 	return 0;
 }
@@ -1381,9 +1382,9 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
 	 */
 
 	if (hs_req->req.complete) {
-		spin_unlock(&hs_ep->lock);
+		spin_unlock(&hsotg->lock);
 		hs_req->req.complete(&hs_ep->ep, &hs_req->req);
-		spin_lock(&hs_ep->lock);
+		spin_lock(&hsotg->lock);
 	}
 
 	/*
@@ -1418,9 +1419,9 @@ static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg,
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&hs_ep->lock, flags);
+	spin_lock_irqsave(&hsotg->lock, flags);
 	s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
-	spin_unlock_irqrestore(&hs_ep->lock, flags);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
 }
 
 /**
@@ -1442,6 +1443,8 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 	int max_req;
 	int read_ptr;
 
+	spin_lock(&hsotg->lock);
+
 	if (!hs_req) {
 		u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx));
 		int ptr;
@@ -1454,11 +1457,10 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 		for (ptr = 0; ptr < size; ptr += 4)
 			(void)readl(fifo);
 
+		spin_unlock(&hsotg->lock);
 		return;
 	}
 
-	spin_lock(&hs_ep->lock);
-
 	to_read = size;
 	read_ptr = hs_req->req.actual;
 	max_req = hs_req->req.length - read_ptr;
@@ -1486,7 +1488,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 	 */
 	readsl(fifo, hs_req->req.buf + read_ptr, to_read);
 
-	spin_unlock(&hs_ep->lock);
+	spin_unlock(&hsotg->lock);
 }
 
 /**
@@ -2123,7 +2125,7 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 	struct s3c_hsotg_req *req, *treq;
 	unsigned long flags;
 
-	spin_lock_irqsave(&ep->lock, flags);
+	spin_lock_irqsave(&hsotg->lock, flags);
 
 	list_for_each_entry_safe(req, treq, &ep->queue, queue) {
 		/*
@@ -2138,7 +2140,7 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 					   result);
 	}
 
-	spin_unlock_irqrestore(&ep->lock, flags);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
 }
 
 #define call_gadget(_hs, _entry) \
@@ -2602,7 +2604,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
 		__func__, epctrl, epctrl_reg);
 
-	spin_lock_irqsave(&hs_ep->lock, flags);
+	spin_lock_irqsave(&hsotg->lock, flags);
 
 	epctrl &= ~(DxEPCTL_EPType_MASK | DxEPCTL_MPS_MASK);
 	epctrl |= DxEPCTL_MPS(mps);
@@ -2681,7 +2683,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 	s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
 
 out:
-	spin_unlock_irqrestore(&hs_ep->lock, flags);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
 	return ret;
 }
 
@@ -2711,7 +2713,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 	/* terminate all requests with shutdown */
 	kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
 
-	spin_lock_irqsave(&hs_ep->lock, flags);
+	spin_lock_irqsave(&hsotg->lock, flags);
 
 	ctrl = readl(hsotg->regs + epctrl_reg);
 	ctrl &= ~DxEPCTL_EPEna;
@@ -2724,7 +2726,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 	/* disable endpoint interrupts */
 	s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
 
-	spin_unlock_irqrestore(&hs_ep->lock, flags);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
 	return 0;
 }
 
@@ -2759,15 +2761,15 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 
 	dev_info(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
 
-	spin_lock_irqsave(&hs_ep->lock, flags);
+	spin_lock_irqsave(&hs->lock, flags);
 
 	if (!on_list(hs_ep, hs_req)) {
-		spin_unlock_irqrestore(&hs_ep->lock, flags);
+		spin_unlock_irqrestore(&hs->lock, flags);
 		return -EINVAL;
 	}
 
 	s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET);
-	spin_unlock_irqrestore(&hs_ep->lock, flags);
+	spin_unlock_irqrestore(&hs->lock, flags);
 
 	return 0;
 }
@@ -2789,7 +2791,7 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 
 	dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
 
-	spin_lock_irqsave(&hs_ep->lock, irqflags);
+	spin_lock_irqsave(&hs->lock, irqflags);
 
 	/* write both IN and OUT control registers */
 
@@ -2825,7 +2827,7 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 
 	writel(epctl, hs->regs + epreg);
 
-	spin_unlock_irqrestore(&hs_ep->lock, irqflags);
+	spin_unlock_irqrestore(&hs->lock, irqflags);
 
 	return 0;
 }
@@ -3061,8 +3063,6 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
 	INIT_LIST_HEAD(&hs_ep->queue);
 	INIT_LIST_HEAD(&hs_ep->ep.ep_list);
 
-	spin_lock_init(&hs_ep->lock);
-
 	/* add to the list of endpoints known by the gadget driver */
 	if (epnum)
 		list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list);
@@ -3340,7 +3340,7 @@ static int ep_show(struct seq_file *seq, void *v)
 	seq_printf(seq, "request list (%p,%p):\n",
 		   ep->queue.next, ep->queue.prev);
 
-	spin_lock_irqsave(&ep->lock, flags);
+	spin_lock_irqsave(&hsotg->lock, flags);
 
 	list_for_each_entry(req, &ep->queue, queue) {
 		if (--show_limit < 0) {
@@ -3355,7 +3355,7 @@ static int ep_show(struct seq_file *seq, void *v)
 			   req->req.actual, req->req.status);
 	}
 
-	spin_unlock_irqrestore(&ep->lock, flags);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
 
 	return 0;
 }
@@ -3507,6 +3507,8 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
+	spin_lock_init(&hsotg->lock);
+
 	hsotg->irq = ret;
 
 	ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0,
-- 
cgit v1.2.3-70-g09d2


From 2b19a52cc8a31ede990323d46a7faeeeba76bb8f Mon Sep 17 00:00:00 2001
From: Lukasz Majewski <l.majewski@samsung.com>
Date: Thu, 14 Jun 2012 10:02:25 +0200
Subject: usb: hsotg: samsung: Protect the udc_stop routine with spinlock

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c-hsotg.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index b10791282f1..ee1fe2b8b07 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2988,6 +2988,7 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
 			  struct usb_gadget_driver *driver)
 {
 	struct s3c_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags = 0;
 	int ep;
 
 	if (!hsotg)
@@ -3000,6 +3001,8 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
 	for (ep = 0; ep < hsotg->num_of_eps; ep++)
 		s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
 
+	spin_lock_irqsave(&hsotg->lock, flags);
+
 	s3c_hsotg_phy_disable(hsotg);
 	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
 
@@ -3007,6 +3010,8 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
 	hsotg->gadget.dev.driver = NULL;
 
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
 	dev_info(hsotg->dev, "unregistered gadget driver '%s'\n",
 		 driver->driver.name);
 
-- 
cgit v1.2.3-70-g09d2


From 5ad1d3160973c588db806072968d7a2a93cb2a80 Mon Sep 17 00:00:00 2001
From: Lukasz Majewski <l.majewski@samsung.com>
Date: Thu, 14 Jun 2012 10:02:26 +0200
Subject: usb: hsotg: samsung: smp Provide *_lock functions abstraction layer
 for SMP SoCs

For SMP processors the spin_lock_irqsave is _only_ able to disable interrupt
on a core on which it is executed.

Therefore there may be a situation when other cores raise s3c-hsotg IRQ.
Then there are several places where critical sections can be overwritten.

To protect the above thread, a spin_lock in the interrupt handler has been
added. Due to coherent memory view (especially L1 cache) the spin lock
variable control access to IRQ handler only for one CPU core. In this way
serialization to access this driver is provided and hence several spin_lock_*
routines could be removed from IRQ handler's related functions.

The complete_request_lock function has been removed since all its calls
are performed from interrupt (spin lock protected) context.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c-hsotg.c | 97 +++++++++++++++++++++---------------------
 1 file changed, 48 insertions(+), 49 deletions(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index ee1fe2b8b07..d208c46341d 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -895,15 +895,12 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
 	struct s3c_hsotg_req *hs_req = our_req(req);
 	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
 	struct s3c_hsotg *hs = hs_ep->parent;
-	unsigned long irqflags;
 	bool first;
 
 	dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
 		ep->name, req, req->length, req->buf, req->no_interrupt,
 		req->zero, req->short_not_ok);
 
-	spin_lock_irqsave(&hs->lock, irqflags);
-
 	/* initialise status of the request */
 	INIT_LIST_HEAD(&hs_req->queue);
 	req->actual = 0;
@@ -922,11 +919,24 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
 	if (first)
 		s3c_hsotg_start_req(hs, hs_ep, hs_req, false);
 
-	spin_unlock_irqrestore(&hs->lock, irqflags);
-
 	return 0;
 }
 
+static int s3c_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req,
+			      gfp_t gfp_flags)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct s3c_hsotg *hs = hs_ep->parent;
+	unsigned long flags = 0;
+	int ret = 0;
+
+	spin_lock_irqsave(&hs->lock, flags);
+	ret = s3c_hsotg_ep_queue(ep, req, gfp_flags);
+	spin_unlock_irqrestore(&hs->lock, flags);
+
+	return ret;
+}
+
 static void s3c_hsotg_ep_free_request(struct usb_ep *ep,
 				      struct usb_request *req)
 {
@@ -1402,28 +1412,6 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
 	}
 }
 
-/**
- * s3c_hsotg_complete_request_lock - complete a request given to us (locked)
- * @hsotg: The device state.
- * @hs_ep: The endpoint the request was on.
- * @hs_req: The request to complete.
- * @result: The result code (0 => Ok, otherwise errno)
- *
- * See s3c_hsotg_complete_request(), but called with the endpoint's
- * lock held.
- */
-static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg,
-					    struct s3c_hsotg_ep *hs_ep,
-					    struct s3c_hsotg_req *hs_req,
-					    int result)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&hsotg->lock, flags);
-	s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
-	spin_unlock_irqrestore(&hsotg->lock, flags);
-}
-
 /**
  * s3c_hsotg_rx_data - receive data from the FIFO for an endpoint
  * @hsotg: The device state.
@@ -1443,7 +1431,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 	int max_req;
 	int read_ptr;
 
-	spin_lock(&hsotg->lock);
 
 	if (!hs_req) {
 		u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx));
@@ -1457,7 +1444,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 		for (ptr = 0; ptr < size; ptr += 4)
 			(void)readl(fifo);
 
-		spin_unlock(&hsotg->lock);
 		return;
 	}
 
@@ -1487,8 +1473,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 	 * alignment of the data.
 	 */
 	readsl(fifo, hs_req->req.buf + read_ptr, to_read);
-
-	spin_unlock(&hsotg->lock);
 }
 
 /**
@@ -1609,7 +1593,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
 			s3c_hsotg_send_zlp(hsotg, hs_req);
 	}
 
-	s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, result);
+	s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
 }
 
 /**
@@ -1864,7 +1848,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
 	/* Finish ZLP handling for IN EP0 transactions */
 	if (hsotg->eps[0].sent_zlp) {
 		dev_dbg(hsotg->dev, "zlp packet received\n");
-		s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
+		s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
 		return;
 	}
 
@@ -1915,7 +1899,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
 		dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
 		s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
 	} else
-		s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
+		s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
 }
 
 /**
@@ -2123,9 +2107,6 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 			      int result, bool force)
 {
 	struct s3c_hsotg_req *req, *treq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&hsotg->lock, flags);
 
 	list_for_each_entry_safe(req, treq, &ep->queue, queue) {
 		/*
@@ -2139,14 +2120,15 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 		s3c_hsotg_complete_request(hsotg, ep, req,
 					   result);
 	}
-
-	spin_unlock_irqrestore(&hsotg->lock, flags);
 }
 
 #define call_gadget(_hs, _entry) \
 	if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN &&	\
-	    (_hs)->driver && (_hs)->driver->_entry)	\
-		(_hs)->driver->_entry(&(_hs)->gadget);
+	    (_hs)->driver && (_hs)->driver->_entry) { \
+		spin_unlock(&_hs->lock); \
+		(_hs)->driver->_entry(&(_hs)->gadget); \
+		spin_lock(&_hs->lock); \
+		}
 
 /**
  * s3c_hsotg_disconnect - disconnect service
@@ -2388,6 +2370,7 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
 	u32 gintsts;
 	u32 gintmsk;
 
+	spin_lock(&hsotg->lock);
 irq_retry:
 	gintsts = readl(hsotg->regs + GINTSTS);
 	gintmsk = readl(hsotg->regs + GINTMSK);
@@ -2557,6 +2540,8 @@ irq_retry:
 	if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
 			goto irq_retry;
 
+	spin_unlock(&hsotg->lock);
+
 	return IRQ_HANDLED;
 }
 
@@ -2710,10 +2695,10 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 
 	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
 
+	spin_lock_irqsave(&hsotg->lock, flags);
 	/* terminate all requests with shutdown */
 	kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
 
-	spin_lock_irqsave(&hsotg->lock, flags);
 
 	ctrl = readl(hsotg->regs + epctrl_reg);
 	ctrl &= ~DxEPCTL_EPEna;
@@ -2784,15 +2769,12 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
 	struct s3c_hsotg *hs = hs_ep->parent;
 	int index = hs_ep->index;
-	unsigned long irqflags;
 	u32 epreg;
 	u32 epctl;
 	u32 xfertype;
 
 	dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
 
-	spin_lock_irqsave(&hs->lock, irqflags);
-
 	/* write both IN and OUT control registers */
 
 	epreg = DIEPCTL(index);
@@ -2827,19 +2809,36 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 
 	writel(epctl, hs->regs + epreg);
 
-	spin_unlock_irqrestore(&hs->lock, irqflags);
-
 	return 0;
 }
 
+/**
+ * s3c_hsotg_ep_sethalt_lock - set halt on a given endpoint with lock held
+ * @ep: The endpoint to set halt.
+ * @value: Set or unset the halt.
+ */
+static int s3c_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct s3c_hsotg *hs = hs_ep->parent;
+	unsigned long flags = 0;
+	int ret = 0;
+
+	spin_lock_irqsave(&hs->lock, flags);
+	ret = s3c_hsotg_ep_sethalt(ep, value);
+	spin_unlock_irqrestore(&hs->lock, flags);
+
+	return ret;
+}
+
 static struct usb_ep_ops s3c_hsotg_ep_ops = {
 	.enable		= s3c_hsotg_ep_enable,
 	.disable	= s3c_hsotg_ep_disable,
 	.alloc_request	= s3c_hsotg_ep_alloc_request,
 	.free_request	= s3c_hsotg_ep_free_request,
-	.queue		= s3c_hsotg_ep_queue,
+	.queue		= s3c_hsotg_ep_queue_lock,
 	.dequeue	= s3c_hsotg_ep_dequeue,
-	.set_halt	= s3c_hsotg_ep_sethalt,
+	.set_halt	= s3c_hsotg_ep_sethalt_lock,
 	/* note, don't believe we have any call for the fifo routines */
 };
 
-- 
cgit v1.2.3-70-g09d2


From 3d4eb9dfa3e89a09cdaaf3d0465479475e4afb0c Mon Sep 17 00:00:00 2001
From: Yu Xu <yuxu@marvell.com>
Date: Fri, 15 Jun 2012 21:45:08 +0800
Subject: usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip.

It supports Marvell USB 3.0 device controller for PXA2128 chip.

Signed-off-by: Yu Xu <yuxu@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/Kconfig       |    9 +
 drivers/usb/gadget/Makefile      |    1 +
 drivers/usb/gadget/mv_u3d.h      |  320 ++++++
 drivers/usb/gadget/mv_u3d_core.c | 2098 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 2428 insertions(+)
 create mode 100644 drivers/usb/gadget/mv_u3d.h
 create mode 100644 drivers/usb/gadget/mv_u3d_core.c

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bddc8fd9a7b..5e242c34088 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -321,6 +321,15 @@ config USB_MV_UDC
 	  USB2.0 OTG controller, which can be configured as high speed or
 	  full speed USB peripheral.
 
+config USB_MV_U3D
+	tristate "MARVELL PXA2128 USB 3.0 controller"
+	depends on CPU_MMP3
+	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SUPERSPEED
+	help
+	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
+	  controller, which support super speed USB peripheral.
+
 #
 # Controllers available in both integrated and discrete versions
 #
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 1811513f1c2..3fd8cd09d2c 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
 obj-$(CONFIG_USB_MV_UDC)	+= mv_udc.o
 mv_udc-y			:= mv_udc_core.o
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
+obj-$(CONFIG_USB_MV_U3D)	+= mv_u3d_core.o
 
 #
 # USB gadget drivers
diff --git a/drivers/usb/gadget/mv_u3d.h b/drivers/usb/gadget/mv_u3d.h
new file mode 100644
index 00000000000..e32a787ac37
--- /dev/null
+++ b/drivers/usb/gadget/mv_u3d.h
@@ -0,0 +1,320 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#ifndef __MV_U3D_H
+#define __MV_U3D_H
+
+#define MV_U3D_EP_CONTEXT_ALIGNMENT	32
+#define MV_U3D_TRB_ALIGNMENT	16
+#define MV_U3D_DMA_BOUNDARY	4096
+#define MV_U3D_EP0_MAX_PKT_SIZE	512
+
+/* ep0 transfer state */
+#define MV_U3D_WAIT_FOR_SETUP		0
+#define MV_U3D_DATA_STATE_XMIT		1
+#define MV_U3D_DATA_STATE_NEED_ZLP	2
+#define MV_U3D_WAIT_FOR_OUT_STATUS	3
+#define MV_U3D_DATA_STATE_RECV		4
+#define MV_U3D_STATUS_STAGE		5
+
+#define MV_U3D_EP_MAX_LENGTH_TRANSFER	0x10000
+
+/* USB3 Interrupt Status */
+#define MV_U3D_USBINT_SETUP		0x00000001
+#define MV_U3D_USBINT_RX_COMPLETE	0x00000002
+#define MV_U3D_USBINT_TX_COMPLETE	0x00000004
+#define MV_U3D_USBINT_UNDER_RUN	0x00000008
+#define MV_U3D_USBINT_RXDESC_ERR	0x00000010
+#define MV_U3D_USBINT_TXDESC_ERR	0x00000020
+#define MV_U3D_USBINT_RX_TRB_COMPLETE	0x00000040
+#define MV_U3D_USBINT_TX_TRB_COMPLETE	0x00000080
+#define MV_U3D_USBINT_VBUS_VALID	0x00010000
+#define MV_U3D_USBINT_STORAGE_CMD_FULL	0x00020000
+#define MV_U3D_USBINT_LINK_CHG		0x01000000
+
+/* USB3 Interrupt Enable */
+#define MV_U3D_INTR_ENABLE_SETUP		0x00000001
+#define MV_U3D_INTR_ENABLE_RX_COMPLETE		0x00000002
+#define MV_U3D_INTR_ENABLE_TX_COMPLETE		0x00000004
+#define MV_U3D_INTR_ENABLE_UNDER_RUN		0x00000008
+#define MV_U3D_INTR_ENABLE_RXDESC_ERR		0x00000010
+#define MV_U3D_INTR_ENABLE_TXDESC_ERR		0x00000020
+#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE	0x00000040
+#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE	0x00000080
+#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR	0x00000100
+#define MV_U3D_INTR_ENABLE_VBUS_VALID		0x00010000
+#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL	0x00020000
+#define MV_U3D_INTR_ENABLE_LINK_CHG		0x01000000
+#define MV_U3D_INTR_ENABLE_PRIME_STATUS	0x02000000
+
+/* USB3 Link Change */
+#define MV_U3D_LINK_CHANGE_LINK_UP		0x00000001
+#define MV_U3D_LINK_CHANGE_SUSPEND		0x00000002
+#define MV_U3D_LINK_CHANGE_RESUME		0x00000004
+#define MV_U3D_LINK_CHANGE_WRESET		0x00000008
+#define MV_U3D_LINK_CHANGE_HRESET		0x00000010
+#define MV_U3D_LINK_CHANGE_VBUS_INVALID	0x00000020
+#define MV_U3D_LINK_CHANGE_INACT		0x00000040
+#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0	0x00000080
+#define MV_U3D_LINK_CHANGE_U1			0x00000100
+#define MV_U3D_LINK_CHANGE_U2			0x00000200
+#define MV_U3D_LINK_CHANGE_U3			0x00000400
+
+/* bridge setting */
+#define MV_U3D_BRIDGE_SETTING_VBUS_VALID	(1 << 16)
+
+/* Command Register Bit Masks */
+#define MV_U3D_CMD_RUN_STOP		0x00000001
+#define MV_U3D_CMD_CTRL_RESET		0x00000002
+
+/* ep control register */
+#define MV_U3D_EPXCR_EP_TYPE_CONTROL		0
+#define MV_U3D_EPXCR_EP_TYPE_ISOC		1
+#define MV_U3D_EPXCR_EP_TYPE_BULK		2
+#define MV_U3D_EPXCR_EP_TYPE_INT		3
+#define MV_U3D_EPXCR_EP_ENABLE_SHIFT		4
+#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT	12
+#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT	16
+#define MV_U3D_USB_BULK_BURST_OUT		6
+#define MV_U3D_USB_BULK_BURST_IN		14
+
+#define MV_U3D_EPXCR_EP_FLUSH		(1 << 7)
+#define MV_U3D_EPXCR_EP_HALT		(1 << 1)
+#define MV_U3D_EPXCR_EP_INIT		(1)
+
+/* TX/RX Status Register */
+#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT	24
+#define MV_U3D_COMPLETE_INVALID	0
+#define MV_U3D_COMPLETE_SUCCESS	1
+#define MV_U3D_COMPLETE_BUFF_ERR	2
+#define MV_U3D_COMPLETE_SHORT_PACKET	3
+#define MV_U3D_COMPLETE_TRB_ERR	5
+#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK	(0xFFFFFF)
+
+#define MV_U3D_USB_LINK_BYPASS_VBUS	0x8
+
+#define MV_U3D_LTSSM_PHY_INIT_DONE		0x80000000
+#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE	0x40000000
+
+#define MV_U3D_USB3_OP_REGS_OFFSET	0x100
+#define MV_U3D_USB3_PHY_OFFSET		0xB800
+
+#define DCS_ENABLE	0x1
+
+/* timeout */
+#define MV_U3D_RESET_TIMEOUT		10000
+#define MV_U3D_FLUSH_TIMEOUT		100000
+#define MV_U3D_OWN_TIMEOUT		10000
+#define LOOPS_USEC_SHIFT	4
+#define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
+#define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
+
+/* ep direction */
+#define MV_U3D_EP_DIR_IN		1
+#define MV_U3D_EP_DIR_OUT		0
+#define mv_u3d_ep_dir(ep)	(((ep)->ep_num == 0) ? \
+				((ep)->u3d->ep0_dir) : ((ep)->direction))
+
+/* usb capability registers */
+struct mv_u3d_cap_regs {
+	u32	rsvd[5];
+	u32	dboff;	/* doorbell register offset */
+	u32	rtsoff;	/* runtime register offset */
+	u32	vuoff;	/* vendor unique register offset */
+};
+
+/* operation registers */
+struct mv_u3d_op_regs {
+	u32	usbcmd;		/* Command register */
+	u32	rsvd1[11];
+	u32	dcbaapl;	/* Device Context Base Address low register */
+	u32	dcbaaph;	/* Device Context Base Address high register */
+	u32	rsvd2[243];
+	u32	portsc;		/* port status and control register*/
+	u32	portlinkinfo;	/* port link info register*/
+	u32	rsvd3[9917];
+	u32	doorbell;	/* doorbell register */
+};
+
+/* control enpoint enable registers */
+struct epxcr {
+	u32	epxoutcr0;	/* ep out control 0 register */
+	u32	epxoutcr1;	/* ep out control 1 register */
+	u32	epxincr0;	/* ep in control 0 register */
+	u32	epxincr1;	/* ep in control 1 register */
+};
+
+/* transfer status registers */
+struct xferstatus {
+	u32	curdeqlo;	/* current TRB pointer low */
+	u32	curdeqhi;	/* current TRB pointer high */
+	u32	statuslo;	/* transfer status low */
+	u32	statushi;	/* transfer status high */
+};
+
+/* vendor unique control registers */
+struct mv_u3d_vuc_regs {
+	u32	ctrlepenable;	/* control endpoint enable register */
+	u32	setuplock;	/* setup lock register */
+	u32	endcomplete;	/* endpoint transfer complete register */
+	u32	intrcause;	/* interrupt cause register */
+	u32	intrenable;	/* interrupt enable register */
+	u32	trbcomplete;	/* TRB complete register */
+	u32	linkchange;	/* link change register */
+	u32	rsvd1[5];
+	u32	trbunderrun;	/* TRB underrun register */
+	u32	rsvd2[43];
+	u32	bridgesetting;	/* bridge setting register */
+	u32	rsvd3[7];
+	struct xferstatus	txst[16];	/* TX status register */
+	struct xferstatus	rxst[16];	/* RX status register */
+	u32	ltssm;		/* LTSSM control register */
+	u32	pipe;		/* PIPE control register */
+	u32	linkcr0;	/* link control 0 register */
+	u32	linkcr1;	/* link control 1 register */
+	u32	rsvd6[60];
+	u32	mib0;		/* MIB0 counter register */
+	u32	usblink;	/* usb link control register */
+	u32	ltssmstate;	/* LTSSM state register */
+	u32	linkerrorcause;	/* link error cause register */
+	u32	rsvd7[60];
+	u32	devaddrtiebrkr;	/* device address and tie breaker */
+	u32	itpinfo0;	/* ITP info 0 register */
+	u32	itpinfo1;	/* ITP info 1 register */
+	u32	rsvd8[61];
+	struct epxcr	epcr[16];	/* ep control register */
+	u32	rsvd9[64];
+	u32	phyaddr;	/* PHY address register */
+	u32	phydata;	/* PHY data register */
+};
+
+/* Endpoint context structure */
+struct mv_u3d_ep_context {
+	u32	rsvd0;
+	u32	rsvd1;
+	u32	trb_addr_lo;		/* TRB address low 32 bit */
+	u32	trb_addr_hi;		/* TRB address high 32 bit */
+	u32	rsvd2;
+	u32	rsvd3;
+	struct usb_ctrlrequest setup_buffer;	/* setup data buffer */
+};
+
+/* TRB control data structure */
+struct mv_u3d_trb_ctrl {
+	u32	own:1;		/* owner of TRB */
+	u32	rsvd1:3;
+	u32	chain:1;	/* associate this TRB with the
+				next TRB on the Ring */
+	u32	ioc:1;		/* interrupt on complete */
+	u32	rsvd2:4;
+	u32	type:6;		/* TRB type */
+#define TYPE_NORMAL	1
+#define TYPE_DATA	3
+#define TYPE_LINK	6
+	u32	dir:1;		/* Working at data stage of control endpoint
+				operation. 0 is OUT and 1 is IN. */
+	u32	rsvd3:15;
+};
+
+/* TRB data structure
+ * For multiple TRB, all the TRBs' physical address should be continuous.
+ */
+struct mv_u3d_trb_hw {
+	u32	buf_addr_lo;	/* data buffer address low 32 bit */
+	u32	buf_addr_hi;	/* data buffer address high 32 bit */
+	u32	trb_len;	/* transfer length */
+	struct mv_u3d_trb_ctrl	ctrl;	/* TRB control data */
+};
+
+/* TRB structure */
+struct mv_u3d_trb {
+	struct mv_u3d_trb_hw *trb_hw;	/* point to the trb_hw structure */
+	dma_addr_t trb_dma;		/* dma address for this trb_hw */
+	struct list_head trb_list;	/* trb list */
+};
+
+/* device data structure */
+struct mv_u3d {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	spinlock_t			lock;	/* device lock */
+	struct completion		*done;
+	struct device			*dev;
+	int				irq;
+
+	/* usb controller registers */
+	struct mv_u3d_cap_regs __iomem	*cap_regs;
+	struct mv_u3d_op_regs __iomem	*op_regs;
+	struct mv_u3d_vuc_regs __iomem	*vuc_regs;
+	void __iomem			*phy_regs;
+
+	unsigned int			max_eps;
+	struct mv_u3d_ep_context	*ep_context;
+	size_t				ep_context_size;
+	dma_addr_t			ep_context_dma;
+
+	struct dma_pool			*trb_pool; /* for TRB data structure */
+	struct mv_u3d_ep		*eps;
+
+	struct mv_u3d_req		*status_req; /* ep0 status request */
+	struct usb_ctrlrequest		local_setup_buff; /* store setup data*/
+
+	unsigned int		resume_state;	/* USB state to resume */
+	unsigned int		usb_state;	/* USB current state */
+	unsigned int		ep0_state;	/* Endpoint zero state */
+	unsigned int		ep0_dir;
+
+	unsigned int		dev_addr;	/* device address */
+
+	unsigned int		errors;
+
+	unsigned		softconnect:1;
+	unsigned		vbus_active:1;	/* vbus is active or not */
+	unsigned		remote_wakeup:1; /* support remote wakeup */
+	unsigned		clock_gating:1;	/* clock gating or not */
+	unsigned		active:1;	/* udc is active or not */
+	unsigned		vbus_valid_detect:1; /* udc vbus detection */
+
+	struct mv_usb_addon_irq *vbus;
+	unsigned int		power;
+
+	struct clk		*clk;
+};
+
+/* endpoint data structure */
+struct mv_u3d_ep {
+	struct usb_ep		ep;
+	struct mv_u3d		*u3d;
+	struct list_head	queue;	/* ep request queued hardware */
+	struct list_head	req_list; /* list of ep request */
+	struct mv_u3d_ep_context	*ep_context; /* ep context */
+	u32			direction;
+	char			name[14];
+	u32			processing; /* there is ep request
+						queued on haredware */
+	spinlock_t		req_lock; /* ep lock */
+	unsigned		wedge:1;
+	unsigned		enabled:1;
+	unsigned		ep_type:2;
+	unsigned		ep_num:8;
+};
+
+/* request data structure */
+struct mv_u3d_req {
+	struct usb_request	req;
+	struct mv_u3d_ep	*ep;
+	struct list_head	queue;	/* ep requst queued on hardware */
+	struct list_head	list;	/* ep request list */
+	struct list_head	trb_list; /* trb list of a request */
+
+	struct mv_u3d_trb	*trb_head; /* point to first trb of a request */
+	unsigned		trb_count; /* TRB number in the chain */
+	unsigned		chain;	   /* TRB chain or not */
+};
+
+#endif
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
new file mode 100644
index 00000000000..8cfd5b028db
--- /dev/null
+++ b/drivers/usb/gadget/mv_u3d_core.c
@@ -0,0 +1,2098 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/mv_usb.h>
+#include <linux/clk.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+#include "mv_u3d.h"
+
+#define DRIVER_DESC		"Marvell PXA USB3.0 Device Controller driver"
+
+static const char driver_name[] = "mv_u3d";
+static const char driver_desc[] = DRIVER_DESC;
+
+static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status);
+static void mv_u3d_stop_activity(struct mv_u3d *u3d,
+			struct usb_gadget_driver *driver);
+
+/* for endpoint 0 operations */
+static const struct usb_endpoint_descriptor mv_u3d_ep0_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	0,
+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize =	MV_U3D_EP0_MAX_PKT_SIZE,
+};
+
+static void mv_u3d_ep0_reset(struct mv_u3d *u3d)
+{
+	struct mv_u3d_ep *ep;
+	u32 epxcr;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		ep = &u3d->eps[i];
+		ep->u3d = u3d;
+
+		/* ep0 ep context, ep0 in and out share the same ep context */
+		ep->ep_context = &u3d->ep_context[1];
+	}
+
+	/* reset ep state machine */
+	/* reset ep0 out */
+	epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+	epxcr |= MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
+	udelay(5);
+	epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
+
+	epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
+		<< MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		| MV_U3D_EPXCR_EP_TYPE_CONTROL);
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr1);
+
+	/* reset ep0 in */
+	epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+	epxcr |= MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
+	udelay(5);
+	epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
+
+	epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
+		<< MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		| MV_U3D_EPXCR_EP_TYPE_CONTROL);
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr1);
+}
+
+static void mv_u3d_ep0_stall(struct mv_u3d *u3d)
+{
+	u32 tmp;
+	dev_dbg(u3d->dev, "%s\n", __func__);
+
+	/* set TX and RX to stall */
+	tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+	tmp |= MV_U3D_EPXCR_EP_HALT;
+	iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+
+	tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+	tmp |= MV_U3D_EPXCR_EP_HALT;
+	iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+
+	/* update ep0 state */
+	u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+	u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+}
+
+static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
+	struct mv_u3d_req *curr_req)
+{
+	struct mv_u3d_trb	*curr_trb;
+	dma_addr_t cur_deq_lo;
+	struct mv_u3d_ep_context	*curr_ep_context;
+	int trb_complete, actual, remaining_length;
+	int direction, ep_num;
+	int retval = 0;
+	u32 tmp, status, length;
+
+	curr_ep_context = &u3d->ep_context[index];
+	direction = index % 2;
+	ep_num = index / 2;
+
+	trb_complete = 0;
+	actual = curr_req->req.length;
+
+	while (!list_empty(&curr_req->trb_list)) {
+		curr_trb = list_entry(curr_req->trb_list.next,
+					struct mv_u3d_trb, trb_list);
+		if (!curr_trb->trb_hw->ctrl.own) {
+			dev_err(u3d->dev, "%s, TRB own error!\n",
+				u3d->eps[index].name);
+			return 1;
+		}
+
+		curr_trb->trb_hw->ctrl.own = 0;
+		if (direction == MV_U3D_EP_DIR_OUT) {
+			tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo);
+			cur_deq_lo =
+				ioread32(&u3d->vuc_regs->rxst[ep_num].curdeqlo);
+		} else {
+			tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo);
+			cur_deq_lo =
+				ioread32(&u3d->vuc_regs->txst[ep_num].curdeqlo);
+		}
+
+		status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT;
+		length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK;
+
+		if (status == MV_U3D_COMPLETE_SUCCESS ||
+			(status == MV_U3D_COMPLETE_SHORT_PACKET &&
+			direction == MV_U3D_EP_DIR_OUT)) {
+			remaining_length += length;
+			actual -= remaining_length;
+		} else {
+			dev_err(u3d->dev,
+				"complete_tr error: ep=%d %s: error = 0x%x\n",
+				index >> 1, direction ? "SEND" : "RECV",
+				status);
+			retval = -EPROTO;
+		}
+
+		list_del_init(&curr_trb->trb_list);
+	}
+	if (retval)
+		return retval;
+
+	curr_req->req.actual = actual;
+	return 0;
+}
+
+/*
+ * mv_u3d_done() - retire a request; caller blocked irqs
+ * @status : request status to be set, only works when
+ * request is still in progress.
+ */
+static
+void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status)
+{
+	struct mv_u3d *u3d = (struct mv_u3d *)ep->u3d;
+
+	dev_dbg(u3d->dev, "mv_u3d_done: remove req->queue\n");
+	/* Removed the req from ep queue */
+	list_del_init(&req->queue);
+
+	/* req.status should be set as -EINPROGRESS in ep_queue() */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	/* Free trb for the request */
+	if (!req->chain)
+		dma_pool_free(u3d->trb_pool,
+			req->trb_head->trb_hw, req->trb_head->trb_dma);
+	else {
+		dma_unmap_single(ep->u3d->gadget.dev.parent,
+			(dma_addr_t)req->trb_head->trb_dma,
+			req->trb_count * sizeof(struct mv_u3d_trb_hw),
+			DMA_BIDIRECTIONAL);
+		kfree(req->trb_head->trb_hw);
+	}
+	kfree(req->trb_head);
+
+	usb_gadget_unmap_request(&u3d->gadget, &req->req, mv_u3d_ep_dir(ep));
+
+	if (status && (status != -ESHUTDOWN)) {
+		dev_dbg(u3d->dev, "complete %s req %p stat %d len %u/%u",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+	}
+
+	spin_unlock(&ep->u3d->lock);
+	/*
+	 * complete() is from gadget layer,
+	 * eg fsg->bulk_in_complete()
+	 */
+	if (req->req.complete)
+		req->req.complete(&ep->ep, &req->req);
+
+	spin_lock(&ep->u3d->lock);
+}
+
+static int mv_u3d_queue_trb(struct mv_u3d_ep *ep, struct mv_u3d_req *req)
+{
+	u32 tmp, direction;
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep_context *ep_context;
+	int retval = 0;
+
+	u3d = ep->u3d;
+	direction = mv_u3d_ep_dir(ep);
+
+	/* ep0 in and out share the same ep context slot 1*/
+	if (ep->ep_num == 0)
+		ep_context = &(u3d->ep_context[1]);
+	else
+		ep_context = &(u3d->ep_context[ep->ep_num * 2 + direction]);
+
+	/* check if the pipe is empty or not */
+	if (!list_empty(&ep->queue)) {
+		dev_err(u3d->dev, "add trb to non-empty queue!\n");
+		retval = -ENOMEM;
+		WARN_ON(1);
+	} else {
+		ep_context->rsvd0 = cpu_to_le32(1);
+		ep_context->rsvd1 = 0;
+
+		/* Configure the trb address and set the DCS bit.
+		 * Both DCS bit and own bit in trb should be set.
+		 */
+		ep_context->trb_addr_lo =
+			cpu_to_le32(req->trb_head->trb_dma | DCS_ENABLE);
+		ep_context->trb_addr_hi = 0;
+
+		/* Ensure that updates to the EP Context will
+		 * occure before Ring Bell.
+		 */
+		wmb();
+
+		/* ring bell the ep */
+		if (ep->ep_num == 0)
+			tmp = 0x1;
+		else
+			tmp = ep->ep_num * 2
+				+ ((direction == MV_U3D_EP_DIR_OUT) ? 0 : 1);
+
+		iowrite32(tmp, &u3d->op_regs->doorbell);
+	}
+	return retval;
+}
+
+static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req,
+				unsigned *length, dma_addr_t *dma)
+{
+	u32 temp;
+	unsigned int direction;
+	struct mv_u3d_trb *trb;
+	struct mv_u3d_trb_hw *trb_hw;
+	struct mv_u3d *u3d;
+
+	/* how big will this transfer be? */
+	*length = req->req.length - req->req.actual;
+	BUG_ON(*length > (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
+
+	u3d = req->ep->u3d;
+
+	trb = kzalloc(sizeof(*trb), GFP_ATOMIC);
+	if (!trb) {
+		dev_err(u3d->dev, "%s, trb alloc fail\n", __func__);
+		return NULL;
+	}
+
+	/*
+	 * Be careful that no _GFP_HIGHMEM is set,
+	 * or we can not use dma_to_virt
+	 * cannot use GFP_KERNEL in spin lock
+	 */
+	trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma);
+	if (!trb_hw) {
+		dev_err(u3d->dev,
+			"%s, dma_pool_alloc fail\n", __func__);
+		return NULL;
+	}
+	trb->trb_dma = *dma;
+	trb->trb_hw = trb_hw;
+
+	/* initialize buffer page pointers */
+	temp = (u32)(req->req.dma + req->req.actual);
+
+	trb_hw->buf_addr_lo = cpu_to_le32(temp);
+	trb_hw->buf_addr_hi = 0;
+	trb_hw->trb_len = cpu_to_le32(*length);
+	trb_hw->ctrl.own = 1;
+
+	if (req->ep->ep_num == 0)
+		trb_hw->ctrl.type = TYPE_DATA;
+	else
+		trb_hw->ctrl.type = TYPE_NORMAL;
+
+	req->req.actual += *length;
+
+	direction = mv_u3d_ep_dir(req->ep);
+	if (direction == MV_U3D_EP_DIR_IN)
+		trb_hw->ctrl.dir = 1;
+	else
+		trb_hw->ctrl.dir = 0;
+
+	/* Enable interrupt for the last trb of a request */
+	if (!req->req.no_interrupt)
+		trb_hw->ctrl.ioc = 1;
+
+	trb_hw->ctrl.chain = 0;
+
+	wmb();
+	return trb;
+}
+
+static int mv_u3d_build_trb_chain(struct mv_u3d_req *req, unsigned *length,
+		struct mv_u3d_trb *trb, int *is_last)
+{
+	u32 temp;
+	unsigned int direction;
+	struct mv_u3d *u3d;
+
+	/* how big will this transfer be? */
+	*length = min(req->req.length - req->req.actual,
+			(unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
+
+	u3d = req->ep->u3d;
+
+	trb->trb_dma = 0;
+
+	/* initialize buffer page pointers */
+	temp = (u32)(req->req.dma + req->req.actual);
+
+	trb->trb_hw->buf_addr_lo = cpu_to_le32(temp);
+	trb->trb_hw->buf_addr_hi = 0;
+	trb->trb_hw->trb_len = cpu_to_le32(*length);
+	trb->trb_hw->ctrl.own = 1;
+
+	if (req->ep->ep_num == 0)
+		trb->trb_hw->ctrl.type = TYPE_DATA;
+	else
+		trb->trb_hw->ctrl.type = TYPE_NORMAL;
+
+	req->req.actual += *length;
+
+	direction = mv_u3d_ep_dir(req->ep);
+	if (direction == MV_U3D_EP_DIR_IN)
+		trb->trb_hw->ctrl.dir = 1;
+	else
+		trb->trb_hw->ctrl.dir = 0;
+
+	/* zlp is needed if req->req.zero is set */
+	if (req->req.zero) {
+		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+			*is_last = 1;
+		else
+			*is_last = 0;
+	} else if (req->req.length == req->req.actual)
+		*is_last = 1;
+	else
+		*is_last = 0;
+
+	/* Enable interrupt for the last trb of a request */
+	if (*is_last && !req->req.no_interrupt)
+		trb->trb_hw->ctrl.ioc = 1;
+
+	if (*is_last)
+		trb->trb_hw->ctrl.chain = 0;
+	else {
+		trb->trb_hw->ctrl.chain = 1;
+		dev_dbg(u3d->dev, "chain trb\n");
+	}
+
+	wmb();
+
+	return 0;
+}
+
+/* generate TRB linked list for a request
+ * usb controller only supports continous trb chain,
+ * that trb structure physical address should be continous.
+ */
+static int mv_u3d_req_to_trb(struct mv_u3d_req *req)
+{
+	unsigned count;
+	int is_last;
+	struct mv_u3d_trb *trb;
+	struct mv_u3d_trb_hw *trb_hw;
+	struct mv_u3d *u3d;
+	dma_addr_t dma;
+	unsigned length;
+	unsigned trb_num;
+
+	u3d = req->ep->u3d;
+
+	INIT_LIST_HEAD(&req->trb_list);
+
+	length = req->req.length - req->req.actual;
+	/* normally the request transfer length is less than 16KB.
+	 * we use buil_trb_one() to optimize it.
+	 */
+	if (length <= (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER) {
+		trb = mv_u3d_build_trb_one(req, &count, &dma);
+		list_add_tail(&trb->trb_list, &req->trb_list);
+		req->trb_head = trb;
+		req->trb_count = 1;
+		req->chain = 0;
+	} else {
+		trb_num = length / MV_U3D_EP_MAX_LENGTH_TRANSFER;
+		if (length % MV_U3D_EP_MAX_LENGTH_TRANSFER)
+			trb_num++;
+
+		trb = kcalloc(trb_num, sizeof(*trb), GFP_ATOMIC);
+		if (!trb) {
+			dev_err(u3d->dev,
+					"%s, trb alloc fail\n", __func__);
+			return -ENOMEM;
+		}
+
+		trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC);
+		if (!trb_hw) {
+			dev_err(u3d->dev,
+					"%s, trb_hw alloc fail\n", __func__);
+			return -ENOMEM;
+		}
+
+		do {
+			trb->trb_hw = trb_hw;
+			if (mv_u3d_build_trb_chain(req, &count,
+						trb, &is_last)) {
+				dev_err(u3d->dev,
+					"%s, mv_u3d_build_trb_chain fail\n",
+					__func__);
+				return -EIO;
+			}
+
+			list_add_tail(&trb->trb_list, &req->trb_list);
+			req->trb_count++;
+			trb++;
+			trb_hw++;
+		} while (!is_last);
+
+		req->trb_head = list_entry(req->trb_list.next,
+					struct mv_u3d_trb, trb_list);
+		req->trb_head->trb_dma = dma_map_single(u3d->gadget.dev.parent,
+					req->trb_head->trb_hw,
+					trb_num * sizeof(*trb_hw),
+					DMA_BIDIRECTIONAL);
+
+		req->chain = 1;
+	}
+
+	return 0;
+}
+
+static int
+mv_u3d_start_queue(struct mv_u3d_ep *ep)
+{
+	struct mv_u3d *u3d = ep->u3d;
+	struct mv_u3d_req *req;
+	int ret;
+
+	if (!list_empty(&ep->req_list) && !ep->processing)
+		req = list_entry(ep->req_list.next, struct mv_u3d_req, list);
+	else
+		return 0;
+
+	ep->processing = 1;
+
+	/* set up dma mapping */
+	ret = usb_gadget_map_request(&u3d->gadget, &req->req,
+					mv_u3d_ep_dir(ep));
+	if (ret)
+		return ret;
+
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->trb_count = 0;
+
+	/* build trbs and push them to device queue */
+	if (!mv_u3d_req_to_trb(req)) {
+		ret = mv_u3d_queue_trb(ep, req);
+		if (ret) {
+			ep->processing = 0;
+			return ret;
+		}
+	} else {
+		ep->processing = 0;
+		dev_err(u3d->dev, "%s, mv_u3d_req_to_trb fail\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* irq handler advances the queue */
+	if (req)
+		list_add_tail(&req->queue, &ep->queue);
+
+	return 0;
+}
+
+static int mv_u3d_ep_enable(struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep *ep;
+	struct mv_u3d_ep_context *ep_context;
+	u16 max = 0;
+	unsigned maxburst = 0;
+	u32 epxcr, direction;
+
+	if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+
+	if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	direction = mv_u3d_ep_dir(ep);
+	max = le16_to_cpu(desc->wMaxPacketSize);
+
+	if (!_ep->maxburst)
+		_ep->maxburst = 1;
+	maxburst = _ep->maxburst;
+
+	/* Get the endpoint context address */
+	ep_context = (struct mv_u3d_ep_context *)ep->ep_context;
+
+	/* Set the max burst size */
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (maxburst > 16) {
+			dev_dbg(u3d->dev,
+				"max burst should not be greater "
+				"than 16 on bulk ep\n");
+			maxburst = 1;
+			_ep->maxburst = maxburst;
+		}
+		dev_dbg(u3d->dev,
+			"maxburst: %d on bulk %s\n", maxburst, ep->name);
+		break;
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* control transfer only supports maxburst as one */
+		maxburst = 1;
+		_ep->maxburst = maxburst;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (maxburst != 1) {
+			dev_dbg(u3d->dev,
+				"max burst should be 1 on int ep "
+				"if transfer size is not 1024\n");
+			maxburst = 1;
+			_ep->maxburst = maxburst;
+		}
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (maxburst != 1) {
+			dev_dbg(u3d->dev,
+				"max burst should be 1 on isoc ep "
+				"if transfer size is not 1024\n");
+			maxburst = 1;
+			_ep->maxburst = maxburst;
+		}
+		break;
+	default:
+		goto en_done;
+	}
+
+	ep->ep.maxpacket = max;
+	ep->ep.desc = desc;
+	ep->enabled = 1;
+
+	/* Enable the endpoint for Rx or Tx and set the endpoint type */
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		epxcr |= MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		udelay(5);
+		epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+
+		epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		      | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		      | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+	} else {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		epxcr |= MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		udelay(5);
+		epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+
+		epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		      | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		      | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+	}
+
+	return 0;
+en_done:
+	return -EINVAL;
+}
+
+static int  mv_u3d_ep_disable(struct usb_ep *_ep)
+{
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep *ep;
+	struct mv_u3d_ep_context *ep_context;
+	u32 epxcr, direction;
+
+	if (!_ep)
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	if (!ep->ep.desc)
+		return -EINVAL;
+
+	u3d = ep->u3d;
+
+	/* Get the endpoint context address */
+	ep_context = ep->ep_context;
+
+	direction = mv_u3d_ep_dir(ep);
+
+	/* nuke all pending requests (does flush) */
+	mv_u3d_nuke(ep, -ESHUTDOWN);
+
+	/* Disable the endpoint for Rx or Tx and reset the endpoint type */
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+		epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | USB_ENDPOINT_XFERTYPE_MASK);
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+	} else {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+		epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | USB_ENDPOINT_XFERTYPE_MASK);
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+	}
+
+	ep->enabled = 0;
+
+	ep->ep.desc = NULL;
+	return 0;
+}
+
+static struct usb_request *
+mv_u3d_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct mv_u3d_req *req = NULL;
+
+	req = kzalloc(sizeof *req, gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void mv_u3d_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_u3d_req *req = container_of(_req, struct mv_u3d_req, req);
+
+	kfree(req);
+}
+
+static void mv_u3d_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct mv_u3d *u3d;
+	u32 direction;
+	struct mv_u3d_ep *ep = container_of(_ep, struct mv_u3d_ep, ep);
+	unsigned int loops;
+	u32 tmp;
+
+	/* if endpoint is not enabled, cannot flush endpoint */
+	if (!ep->enabled)
+		return;
+
+	u3d = ep->u3d;
+	direction = mv_u3d_ep_dir(ep);
+
+	/* ep0 need clear bit after flushing fifo. */
+	if (!ep->ep_num) {
+		if (direction == MV_U3D_EP_DIR_OUT) {
+			tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+			tmp |= MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+			udelay(10);
+			tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+		} else {
+			tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+			tmp |= MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+			udelay(10);
+			tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+		}
+		return;
+	}
+
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		tmp |= MV_U3D_EPXCR_EP_FLUSH;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+
+		/* Wait until flushing completed */
+		loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
+		while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0) &
+			MV_U3D_EPXCR_EP_FLUSH) {
+			/*
+			 * EP_FLUSH bit should be cleared to indicate this
+			 * operation is complete
+			 */
+			if (loops == 0) {
+				dev_dbg(u3d->dev,
+				    "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
+				    direction ? "in" : "out");
+				return;
+			}
+			loops--;
+			udelay(LOOPS_USEC);
+		}
+	} else {	/* EP_DIR_IN */
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		tmp |= MV_U3D_EPXCR_EP_FLUSH;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+
+		/* Wait until flushing completed */
+		loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
+		while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0) &
+			MV_U3D_EPXCR_EP_FLUSH) {
+			/*
+			* EP_FLUSH bit should be cleared to indicate this
+			* operation is complete
+			*/
+			if (loops == 0) {
+				dev_dbg(u3d->dev,
+				    "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
+				    direction ? "in" : "out");
+				return;
+			}
+			loops--;
+			udelay(LOOPS_USEC);
+		}
+	}
+}
+
+/* queues (submits) an I/O request to an endpoint */
+static int
+mv_u3d_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct mv_u3d_ep *ep;
+	struct mv_u3d_req *req;
+	struct mv_u3d *u3d;
+	unsigned long flags;
+	int is_first_req = 0;
+
+	if (unlikely(!_ep || !_req))
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+
+	req = container_of(_req, struct mv_u3d_req, req);
+
+	if (!ep->ep_num
+		&& u3d->ep0_state == MV_U3D_STATUS_STAGE
+		&& !_req->length) {
+		dev_dbg(u3d->dev, "ep0 status stage\n");
+		u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+		return 0;
+	}
+
+	dev_dbg(u3d->dev, "%s: %s, req: 0x%x\n",
+			__func__, _ep->name, (u32)req);
+
+	/* catch various bogus parameters */
+	if (!req->req.complete || !req->req.buf
+			|| !list_empty(&req->queue)) {
+		dev_err(u3d->dev,
+			"%s, bad params, _req: 0x%x,"
+			"req->req.complete: 0x%x, req->req.buf: 0x%x,"
+			"list_empty: 0x%x\n",
+			__func__, (u32)_req,
+			(u32)req->req.complete, (u32)req->req.buf,
+			(u32)list_empty(&req->queue));
+		return -EINVAL;
+	}
+	if (unlikely(!ep->ep.desc)) {
+		dev_err(u3d->dev, "%s, bad ep\n", __func__);
+		return -EINVAL;
+	}
+	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		if (req->req.length > ep->ep.maxpacket)
+			return -EMSGSIZE;
+	}
+
+	if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_err(u3d->dev,
+			"bad params of driver/speed\n");
+		return -ESHUTDOWN;
+	}
+
+	req->ep = ep;
+
+	/* Software list handles usb request. */
+	spin_lock_irqsave(&ep->req_lock, flags);
+	is_first_req = list_empty(&ep->req_list);
+	list_add_tail(&req->list, &ep->req_list);
+	spin_unlock_irqrestore(&ep->req_lock, flags);
+	if (!is_first_req) {
+		dev_dbg(u3d->dev, "list is not empty\n");
+		return 0;
+	}
+
+	dev_dbg(u3d->dev, "call mv_u3d_start_queue from usb_ep_queue\n");
+	spin_lock_irqsave(&u3d->lock, flags);
+	mv_u3d_start_queue(ep);
+	spin_unlock_irqrestore(&u3d->lock, flags);
+	return 0;
+}
+
+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
+static int mv_u3d_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_u3d_ep *ep;
+	struct mv_u3d_req *req;
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep_context *ep_context;
+	struct mv_u3d_req *next_req;
+
+	unsigned long flags;
+	int ret = 0;
+
+	if (!_ep || !_req)
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+
+	spin_lock_irqsave(&ep->u3d->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+	if (&req->req != _req) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* The request is in progress, or completed but not dequeued */
+	if (ep->queue.next == &req->queue) {
+		_req->status = -ECONNRESET;
+		mv_u3d_ep_fifo_flush(_ep);
+
+		/* The request isn't the last request in this ep queue */
+		if (req->queue.next != &ep->queue) {
+			dev_dbg(u3d->dev,
+				"it is the last request in this ep queue\n");
+			ep_context = ep->ep_context;
+			next_req = list_entry(req->queue.next,
+					struct mv_u3d_req, queue);
+
+			/* Point first TRB of next request to the EP context. */
+			iowrite32((u32) next_req->trb_head,
+					&ep_context->trb_addr_lo);
+		} else {
+			struct mv_u3d_ep_context *ep_context;
+			ep_context = ep->ep_context;
+			ep_context->trb_addr_lo = 0;
+			ep_context->trb_addr_hi = 0;
+		}
+
+	} else
+		WARN_ON(1);
+
+	mv_u3d_done(ep, req, -ECONNRESET);
+
+	/* remove the req from the ep req list */
+	if (!list_empty(&ep->req_list)) {
+		struct mv_u3d_req *curr_req;
+		curr_req = list_entry(ep->req_list.next,
+					struct mv_u3d_req, list);
+		if (curr_req == req) {
+			list_del_init(&req->list);
+			ep->processing = 0;
+		}
+	}
+
+out:
+	spin_unlock_irqrestore(&ep->u3d->lock, flags);
+	return ret;
+}
+
+static void
+mv_u3d_ep_set_stall(struct mv_u3d *u3d, u8 ep_num, u8 direction, int stall)
+{
+	u32 tmp;
+	struct mv_u3d_ep *ep = u3d->eps;
+
+	dev_dbg(u3d->dev, "%s\n", __func__);
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		if (stall)
+			tmp |= MV_U3D_EPXCR_EP_HALT;
+		else
+			tmp &= ~MV_U3D_EPXCR_EP_HALT;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+	} else {
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		if (stall)
+			tmp |= MV_U3D_EPXCR_EP_HALT;
+		else
+			tmp &= ~MV_U3D_EPXCR_EP_HALT;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+	}
+}
+
+static int mv_u3d_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
+{
+	struct mv_u3d_ep *ep;
+	unsigned long flags = 0;
+	int status = 0;
+	struct mv_u3d *u3d;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+	if (!ep->ep.desc) {
+		status = -EINVAL;
+		goto out;
+	}
+
+	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		status = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/*
+	 * Attempt to halt IN ep will fail if any transfer requests
+	 * are still queue
+	 */
+	if (halt && (mv_u3d_ep_dir(ep) == MV_U3D_EP_DIR_IN)
+			&& !list_empty(&ep->queue)) {
+		status = -EAGAIN;
+		goto out;
+	}
+
+	spin_lock_irqsave(&ep->u3d->lock, flags);
+	mv_u3d_ep_set_stall(u3d, ep->ep_num, mv_u3d_ep_dir(ep), halt);
+	if (halt && wedge)
+		ep->wedge = 1;
+	else if (!halt)
+		ep->wedge = 0;
+	spin_unlock_irqrestore(&ep->u3d->lock, flags);
+
+	if (ep->ep_num == 0)
+		u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+out:
+	return status;
+}
+
+static int mv_u3d_ep_set_halt(struct usb_ep *_ep, int halt)
+{
+	return mv_u3d_ep_set_halt_wedge(_ep, halt, 0);
+}
+
+static int mv_u3d_ep_set_wedge(struct usb_ep *_ep)
+{
+	return mv_u3d_ep_set_halt_wedge(_ep, 1, 1);
+}
+
+static struct usb_ep_ops mv_u3d_ep_ops = {
+	.enable		= mv_u3d_ep_enable,
+	.disable	= mv_u3d_ep_disable,
+
+	.alloc_request	= mv_u3d_alloc_request,
+	.free_request	= mv_u3d_free_request,
+
+	.queue		= mv_u3d_ep_queue,
+	.dequeue	= mv_u3d_ep_dequeue,
+
+	.set_wedge	= mv_u3d_ep_set_wedge,
+	.set_halt	= mv_u3d_ep_set_halt,
+	.fifo_flush	= mv_u3d_ep_fifo_flush,
+};
+
+static void mv_u3d_controller_stop(struct mv_u3d *u3d)
+{
+	u32 tmp;
+
+	if (!u3d->clock_gating && u3d->vbus_valid_detect)
+		iowrite32(MV_U3D_INTR_ENABLE_VBUS_VALID,
+				&u3d->vuc_regs->intrenable);
+	else
+		iowrite32(0, &u3d->vuc_regs->intrenable);
+	iowrite32(~0x0, &u3d->vuc_regs->endcomplete);
+	iowrite32(~0x0, &u3d->vuc_regs->trbunderrun);
+	iowrite32(~0x0, &u3d->vuc_regs->trbcomplete);
+	iowrite32(~0x0, &u3d->vuc_regs->linkchange);
+	iowrite32(0x1, &u3d->vuc_regs->setuplock);
+
+	/* Reset the RUN bit in the command register to stop USB */
+	tmp = ioread32(&u3d->op_regs->usbcmd);
+	tmp &= ~MV_U3D_CMD_RUN_STOP;
+	iowrite32(tmp, &u3d->op_regs->usbcmd);
+	dev_dbg(u3d->dev, "after u3d_stop, USBCMD 0x%x\n",
+		ioread32(&u3d->op_regs->usbcmd));
+}
+
+static void mv_u3d_controller_start(struct mv_u3d *u3d)
+{
+	u32 usbintr;
+	u32 temp;
+
+	/* enable link LTSSM state machine */
+	temp = ioread32(&u3d->vuc_regs->ltssm);
+	temp |= MV_U3D_LTSSM_PHY_INIT_DONE;
+	iowrite32(temp, &u3d->vuc_regs->ltssm);
+
+	/* Enable interrupts */
+	usbintr = MV_U3D_INTR_ENABLE_LINK_CHG | MV_U3D_INTR_ENABLE_TXDESC_ERR |
+		MV_U3D_INTR_ENABLE_RXDESC_ERR | MV_U3D_INTR_ENABLE_TX_COMPLETE |
+		MV_U3D_INTR_ENABLE_RX_COMPLETE | MV_U3D_INTR_ENABLE_SETUP |
+		(u3d->vbus_valid_detect ? MV_U3D_INTR_ENABLE_VBUS_VALID : 0);
+	iowrite32(usbintr, &u3d->vuc_regs->intrenable);
+
+	/* Enable ctrl ep */
+	iowrite32(0x1, &u3d->vuc_regs->ctrlepenable);
+
+	/* Set the Run bit in the command register */
+	iowrite32(MV_U3D_CMD_RUN_STOP, &u3d->op_regs->usbcmd);
+	dev_dbg(u3d->dev, "after u3d_start, USBCMD 0x%x\n",
+		ioread32(&u3d->op_regs->usbcmd));
+}
+
+static int mv_u3d_controller_reset(struct mv_u3d *u3d)
+{
+	unsigned int loops;
+	u32 tmp;
+
+	/* Stop the controller */
+	tmp = ioread32(&u3d->op_regs->usbcmd);
+	tmp &= ~MV_U3D_CMD_RUN_STOP;
+	iowrite32(tmp, &u3d->op_regs->usbcmd);
+
+	/* Reset the controller to get default values */
+	iowrite32(MV_U3D_CMD_CTRL_RESET, &u3d->op_regs->usbcmd);
+
+	/* wait for reset to complete */
+	loops = LOOPS(MV_U3D_RESET_TIMEOUT);
+	while (ioread32(&u3d->op_regs->usbcmd) & MV_U3D_CMD_CTRL_RESET) {
+		if (loops == 0) {
+			dev_err(u3d->dev,
+				"Wait for RESET completed TIMEOUT\n");
+			return -ETIMEDOUT;
+		}
+		loops--;
+		udelay(LOOPS_USEC);
+	}
+
+	/* Configure the Endpoint Context Address */
+	iowrite32(u3d->ep_context_dma, &u3d->op_regs->dcbaapl);
+	iowrite32(0, &u3d->op_regs->dcbaaph);
+
+	return 0;
+}
+
+static int mv_u3d_enable(struct mv_u3d *u3d)
+{
+	struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+	int retval;
+
+	if (u3d->active)
+		return 0;
+
+	if (!u3d->clock_gating) {
+		u3d->active = 1;
+		return 0;
+	}
+
+	dev_dbg(u3d->dev, "enable u3d\n");
+	clk_enable(u3d->clk);
+	if (pdata->phy_init) {
+		retval = pdata->phy_init(u3d->phy_regs);
+		if (retval) {
+			dev_err(u3d->dev,
+				"init phy error %d\n", retval);
+			clk_disable(u3d->clk);
+			return retval;
+		}
+	}
+	u3d->active = 1;
+
+	return 0;
+}
+
+static void mv_u3d_disable(struct mv_u3d *u3d)
+{
+	struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+	if (u3d->clock_gating && u3d->active) {
+		dev_dbg(u3d->dev, "disable u3d\n");
+		if (pdata->phy_deinit)
+			pdata->phy_deinit(u3d->phy_regs);
+		clk_disable(u3d->clk);
+		u3d->active = 0;
+	}
+}
+
+static int mv_u3d_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct mv_u3d *u3d;
+	unsigned long flags;
+	int retval = 0;
+
+	u3d = container_of(gadget, struct mv_u3d, gadget);
+
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	u3d->vbus_active = (is_active != 0);
+	dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
+		__func__, u3d->softconnect, u3d->vbus_active);
+	/*
+	 * 1. external VBUS detect: we can disable/enable clock on demand.
+	 * 2. UDC VBUS detect: we have to enable clock all the time.
+	 * 3. No VBUS detect: we have to enable clock all the time.
+	 */
+	if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
+		retval = mv_u3d_enable(u3d);
+		if (retval == 0) {
+			/*
+			 * after clock is disabled, we lost all the register
+			 *  context. We have to re-init registers
+			 */
+			mv_u3d_controller_reset(u3d);
+			mv_u3d_ep0_reset(u3d);
+			mv_u3d_controller_start(u3d);
+		}
+	} else if (u3d->driver && u3d->softconnect) {
+		if (!u3d->active)
+			goto out;
+
+		/* stop all the transfer in queue*/
+		mv_u3d_stop_activity(u3d, u3d->driver);
+		mv_u3d_controller_stop(u3d);
+		mv_u3d_disable(u3d);
+	}
+
+out:
+	spin_unlock_irqrestore(&u3d->lock, flags);
+	return retval;
+}
+
+/* constrain controller's VBUS power usage
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume.  For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static int mv_u3d_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
+
+	u3d->power = mA;
+
+	return 0;
+}
+
+static int mv_u3d_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
+	unsigned long flags;
+	int retval = 0;
+
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
+		__func__, u3d->softconnect, u3d->vbus_active);
+	u3d->softconnect = (is_on != 0);
+	if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
+		retval = mv_u3d_enable(u3d);
+		if (retval == 0) {
+			/*
+			 * after clock is disabled, we lost all the register
+			 *  context. We have to re-init registers
+			 */
+			mv_u3d_controller_reset(u3d);
+			mv_u3d_ep0_reset(u3d);
+			mv_u3d_controller_start(u3d);
+		}
+	} else if (u3d->driver && u3d->vbus_active) {
+		/* stop all the transfer in queue*/
+		mv_u3d_stop_activity(u3d, u3d->driver);
+		mv_u3d_controller_stop(u3d);
+		mv_u3d_disable(u3d);
+	}
+
+	spin_unlock_irqrestore(&u3d->lock, flags);
+
+	return retval;
+}
+
+static int mv_u3d_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
+	struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+	unsigned long flags;
+
+	if (u3d->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	if (!u3d->clock_gating) {
+		clk_enable(u3d->clk);
+		if (pdata->phy_init)
+			pdata->phy_init(u3d->phy_regs);
+	}
+
+	/* hook up the driver ... */
+	driver->driver.bus = NULL;
+	u3d->driver = driver;
+	u3d->gadget.dev.driver = &driver->driver;
+
+	u3d->ep0_dir = USB_DIR_OUT;
+
+	spin_unlock_irqrestore(&u3d->lock, flags);
+
+	u3d->vbus_valid_detect = 1;
+
+	return 0;
+}
+
+static int mv_u3d_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
+	struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+	unsigned long flags;
+
+	u3d->vbus_valid_detect = 0;
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	/* enable clock to access controller register */
+	clk_enable(u3d->clk);
+	if (pdata->phy_init)
+		pdata->phy_init(u3d->phy_regs);
+
+	mv_u3d_controller_stop(u3d);
+	/* stop all usb activities */
+	u3d->gadget.speed = USB_SPEED_UNKNOWN;
+	mv_u3d_stop_activity(u3d, driver);
+	mv_u3d_disable(u3d);
+
+	if (pdata->phy_deinit)
+		pdata->phy_deinit(u3d->phy_regs);
+	clk_disable(u3d->clk);
+
+	spin_unlock_irqrestore(&u3d->lock, flags);
+
+	u3d->gadget.dev.driver = NULL;
+	u3d->driver = NULL;
+
+	return 0;
+}
+
+/* device controller usb_gadget_ops structure */
+static const struct usb_gadget_ops mv_u3d_ops = {
+	/* notify controller that VBUS is powered or not */
+	.vbus_session	= mv_u3d_vbus_session,
+
+	/* constrain controller's VBUS power usage */
+	.vbus_draw	= mv_u3d_vbus_draw,
+
+	.pullup		= mv_u3d_pullup,
+	.udc_start	= mv_u3d_start,
+	.udc_stop	= mv_u3d_stop,
+};
+
+static int mv_u3d_eps_init(struct mv_u3d *u3d)
+{
+	struct mv_u3d_ep	*ep;
+	char name[14];
+	int i;
+
+	/* initialize ep0, ep0 in/out use eps[1] */
+	ep = &u3d->eps[1];
+	ep->u3d = u3d;
+	strncpy(ep->name, "ep0", sizeof(ep->name));
+	ep->ep.name = ep->name;
+	ep->ep.ops = &mv_u3d_ep_ops;
+	ep->wedge = 0;
+	ep->ep.maxpacket = MV_U3D_EP0_MAX_PKT_SIZE;
+	ep->ep_num = 0;
+	ep->ep.desc = &mv_u3d_ep0_desc;
+	INIT_LIST_HEAD(&ep->queue);
+	INIT_LIST_HEAD(&ep->req_list);
+	ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+	/* add ep0 ep_context */
+	ep->ep_context = &u3d->ep_context[1];
+
+	/* initialize other endpoints */
+	for (i = 2; i < u3d->max_eps * 2; i++) {
+		ep = &u3d->eps[i];
+		if (i & 1) {
+			snprintf(name, sizeof(name), "ep%din", i >> 1);
+			ep->direction = MV_U3D_EP_DIR_IN;
+		} else {
+			snprintf(name, sizeof(name), "ep%dout", i >> 1);
+			ep->direction = MV_U3D_EP_DIR_OUT;
+		}
+		ep->u3d = u3d;
+		strncpy(ep->name, name, sizeof(ep->name));
+		ep->ep.name = ep->name;
+
+		ep->ep.ops = &mv_u3d_ep_ops;
+		ep->ep.maxpacket = (unsigned short) ~0;
+		ep->ep_num = i / 2;
+
+		INIT_LIST_HEAD(&ep->queue);
+		list_add_tail(&ep->ep.ep_list, &u3d->gadget.ep_list);
+
+		INIT_LIST_HEAD(&ep->req_list);
+		spin_lock_init(&ep->req_lock);
+		ep->ep_context = &u3d->ep_context[i];
+	}
+
+	return 0;
+}
+
+/* delete all endpoint requests, called with spinlock held */
+static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status)
+{
+	/* endpoint fifo flush */
+	mv_u3d_ep_fifo_flush(&ep->ep);
+
+	while (!list_empty(&ep->queue)) {
+		struct mv_u3d_req *req = NULL;
+		req = list_entry(ep->queue.next, struct mv_u3d_req, queue);
+		mv_u3d_done(ep, req, status);
+	}
+}
+
+/* stop all USB activities */
+static
+void mv_u3d_stop_activity(struct mv_u3d *u3d, struct usb_gadget_driver *driver)
+{
+	struct mv_u3d_ep	*ep;
+
+	mv_u3d_nuke(&u3d->eps[1], -ESHUTDOWN);
+
+	list_for_each_entry(ep, &u3d->gadget.ep_list, ep.ep_list) {
+		mv_u3d_nuke(ep, -ESHUTDOWN);
+	}
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&u3d->lock);
+		driver->disconnect(&u3d->gadget);
+		spin_lock(&u3d->lock);
+	}
+}
+
+static void mv_u3d_irq_process_error(struct mv_u3d *u3d)
+{
+	/* Increment the error count */
+	u3d->errors++;
+	dev_err(u3d->dev, "%s\n", __func__);
+}
+
+static void mv_u3d_irq_process_link_change(struct mv_u3d *u3d)
+{
+	u32 linkchange;
+
+	linkchange = ioread32(&u3d->vuc_regs->linkchange);
+	iowrite32(linkchange, &u3d->vuc_regs->linkchange);
+
+	dev_dbg(u3d->dev, "linkchange: 0x%x\n", linkchange);
+
+	if (linkchange & MV_U3D_LINK_CHANGE_LINK_UP) {
+		dev_dbg(u3d->dev, "link up: ltssm state: 0x%x\n",
+			ioread32(&u3d->vuc_regs->ltssmstate));
+
+		u3d->usb_state = USB_STATE_DEFAULT;
+		u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+		u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+
+		/* set speed */
+		u3d->gadget.speed = USB_SPEED_SUPER;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_SUSPEND) {
+		dev_dbg(u3d->dev, "link suspend\n");
+		u3d->resume_state = u3d->usb_state;
+		u3d->usb_state = USB_STATE_SUSPENDED;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_RESUME) {
+		dev_dbg(u3d->dev, "link resume\n");
+		u3d->usb_state = u3d->resume_state;
+		u3d->resume_state = 0;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_WRESET) {
+		dev_dbg(u3d->dev, "warm reset\n");
+		u3d->usb_state = USB_STATE_POWERED;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_HRESET) {
+		dev_dbg(u3d->dev, "hot reset\n");
+		u3d->usb_state = USB_STATE_DEFAULT;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_INACT)
+		dev_dbg(u3d->dev, "inactive\n");
+
+	if (linkchange & MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0)
+		dev_dbg(u3d->dev, "ss.disabled\n");
+
+	if (linkchange & MV_U3D_LINK_CHANGE_VBUS_INVALID) {
+		dev_dbg(u3d->dev, "vbus invalid\n");
+		u3d->usb_state = USB_STATE_ATTACHED;
+		u3d->vbus_valid_detect = 1;
+		/* if external vbus detect is not supported,
+		 * we handle it here.
+		 */
+		if (!u3d->vbus) {
+			spin_unlock(&u3d->lock);
+			mv_u3d_vbus_session(&u3d->gadget, 0);
+			spin_lock(&u3d->lock);
+		}
+	}
+}
+
+static void mv_u3d_ch9setaddress(struct mv_u3d *u3d,
+				struct usb_ctrlrequest *setup)
+{
+	u32 tmp;
+
+	if (u3d->usb_state != USB_STATE_DEFAULT) {
+		dev_err(u3d->dev,
+			"%s, cannot setaddr in this state (%d)\n",
+			__func__, u3d->usb_state);
+		goto err;
+	}
+
+	u3d->dev_addr = (u8)setup->wValue;
+
+	dev_dbg(u3d->dev, "%s: 0x%x\n", __func__, u3d->dev_addr);
+
+	if (u3d->dev_addr > 127) {
+		dev_err(u3d->dev,
+			"%s, u3d address is wrong (out of range)\n", __func__);
+		u3d->dev_addr = 0;
+		goto err;
+	}
+
+	/* update usb state */
+	u3d->usb_state = USB_STATE_ADDRESS;
+
+	/* set the new address */
+	tmp = ioread32(&u3d->vuc_regs->devaddrtiebrkr);
+	tmp &= ~0x7F;
+	tmp |= (u32)u3d->dev_addr;
+	iowrite32(tmp, &u3d->vuc_regs->devaddrtiebrkr);
+
+	return;
+err:
+	mv_u3d_ep0_stall(u3d);
+}
+
+static int mv_u3d_is_set_configuration(struct usb_ctrlrequest *setup)
+{
+	if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		if (setup->bRequest == USB_REQ_SET_CONFIGURATION)
+			return 1;
+
+	return 0;
+}
+
+static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num,
+	struct usb_ctrlrequest *setup)
+{
+	bool delegate = false;
+
+	mv_u3d_nuke(&u3d->eps[ep_num * 2 + MV_U3D_EP_DIR_IN], -ESHUTDOWN);
+
+	dev_dbg(u3d->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+			setup->bRequestType, setup->bRequest,
+			setup->wValue, setup->wIndex, setup->wLength);
+
+	/* We process some stardard setup requests here */
+	if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (setup->bRequest) {
+		case USB_REQ_GET_STATUS:
+			delegate = true;
+			break;
+
+		case USB_REQ_SET_ADDRESS:
+			mv_u3d_ch9setaddress(u3d, setup);
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			delegate = true;
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			delegate = true;
+			break;
+
+		default:
+			delegate = true;
+		}
+	} else
+		delegate = true;
+
+	/* delegate USB standard requests to the gadget driver */
+	if (delegate == true) {
+		/* USB requests handled by gadget */
+		if (setup->wLength) {
+			/* DATA phase from gadget, STATUS phase from u3d */
+			u3d->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+					? MV_U3D_EP_DIR_IN : MV_U3D_EP_DIR_OUT;
+			spin_unlock(&u3d->lock);
+			if (u3d->driver->setup(&u3d->gadget,
+				&u3d->local_setup_buff) < 0) {
+				dev_err(u3d->dev, "setup error!\n");
+				mv_u3d_ep0_stall(u3d);
+			}
+			spin_lock(&u3d->lock);
+		} else {
+			/* no DATA phase, STATUS phase from gadget */
+			u3d->ep0_dir = MV_U3D_EP_DIR_IN;
+			u3d->ep0_state = MV_U3D_STATUS_STAGE;
+			spin_unlock(&u3d->lock);
+			if (u3d->driver->setup(&u3d->gadget,
+				&u3d->local_setup_buff) < 0)
+				mv_u3d_ep0_stall(u3d);
+			spin_lock(&u3d->lock);
+		}
+
+		if (mv_u3d_is_set_configuration(setup)) {
+			dev_dbg(u3d->dev, "u3d configured\n");
+			u3d->usb_state = USB_STATE_CONFIGURED;
+		}
+	}
+}
+
+static void mv_u3d_get_setup_data(struct mv_u3d *u3d, u8 ep_num, u8 *buffer_ptr)
+{
+	struct mv_u3d_ep_context *epcontext;
+
+	epcontext = &u3d->ep_context[ep_num * 2 + MV_U3D_EP_DIR_IN];
+
+	/* Copy the setup packet to local buffer */
+	memcpy(buffer_ptr, (u8 *) &epcontext->setup_buffer, 8);
+}
+
+static void mv_u3d_irq_process_setup(struct mv_u3d *u3d)
+{
+	u32 tmp, i;
+	/* Process all Setup packet received interrupts */
+	tmp = ioread32(&u3d->vuc_regs->setuplock);
+	if (tmp) {
+		for (i = 0; i < u3d->max_eps; i++) {
+			if (tmp & (1 << i)) {
+				mv_u3d_get_setup_data(u3d, i,
+					(u8 *)(&u3d->local_setup_buff));
+				mv_u3d_handle_setup_packet(u3d, i,
+					&u3d->local_setup_buff);
+			}
+		}
+	}
+
+	iowrite32(tmp, &u3d->vuc_regs->setuplock);
+}
+
+static void mv_u3d_irq_process_tr_complete(struct mv_u3d *u3d)
+{
+	u32 tmp, bit_pos;
+	int i, ep_num = 0, direction = 0;
+	struct mv_u3d_ep	*curr_ep;
+	struct mv_u3d_req *curr_req, *temp_req;
+	int status;
+
+	tmp = ioread32(&u3d->vuc_regs->endcomplete);
+
+	dev_dbg(u3d->dev, "tr_complete: ep: 0x%x\n", tmp);
+	if (!tmp)
+		return;
+	iowrite32(tmp, &u3d->vuc_regs->endcomplete);
+
+	for (i = 0; i < u3d->max_eps * 2; i++) {
+		ep_num = i >> 1;
+		direction = i % 2;
+
+		bit_pos = 1 << (ep_num + 16 * direction);
+
+		if (!(bit_pos & tmp))
+			continue;
+
+		if (i == 0)
+			curr_ep = &u3d->eps[1];
+		else
+			curr_ep = &u3d->eps[i];
+
+		/* remove req out of ep request list after completion */
+		dev_dbg(u3d->dev, "tr comp: check req_list\n");
+		spin_lock(&curr_ep->req_lock);
+		if (!list_empty(&curr_ep->req_list)) {
+			struct mv_u3d_req *req;
+			req = list_entry(curr_ep->req_list.next,
+						struct mv_u3d_req, list);
+			list_del_init(&req->list);
+			curr_ep->processing = 0;
+		}
+		spin_unlock(&curr_ep->req_lock);
+
+		/* process the req queue until an uncomplete request */
+		list_for_each_entry_safe(curr_req, temp_req,
+			&curr_ep->queue, queue) {
+			status = mv_u3d_process_ep_req(u3d, i, curr_req);
+			if (status)
+				break;
+			/* write back status to req */
+			curr_req->req.status = status;
+
+			/* ep0 request completion */
+			if (ep_num == 0) {
+				mv_u3d_done(curr_ep, curr_req, 0);
+				break;
+			} else {
+				mv_u3d_done(curr_ep, curr_req, status);
+			}
+		}
+
+		dev_dbg(u3d->dev, "call mv_u3d_start_queue from ep complete\n");
+		mv_u3d_start_queue(curr_ep);
+	}
+}
+
+static irqreturn_t mv_u3d_irq(int irq, void *dev)
+{
+	struct mv_u3d *u3d = (struct mv_u3d *)dev;
+	u32 status, intr;
+	u32 bridgesetting;
+	u32 trbunderrun;
+
+	spin_lock(&u3d->lock);
+
+	status = ioread32(&u3d->vuc_regs->intrcause);
+	intr = ioread32(&u3d->vuc_regs->intrenable);
+	status &= intr;
+
+	if (status == 0) {
+		spin_unlock(&u3d->lock);
+		dev_err(u3d->dev, "irq error!\n");
+		return IRQ_NONE;
+	}
+
+	if (status & MV_U3D_USBINT_VBUS_VALID) {
+		bridgesetting = ioread32(&u3d->vuc_regs->bridgesetting);
+		if (bridgesetting & MV_U3D_BRIDGE_SETTING_VBUS_VALID) {
+			/* write vbus valid bit of bridge setting to clear */
+			bridgesetting = MV_U3D_BRIDGE_SETTING_VBUS_VALID;
+			iowrite32(bridgesetting, &u3d->vuc_regs->bridgesetting);
+			dev_dbg(u3d->dev, "vbus valid\n");
+
+			u3d->usb_state = USB_STATE_POWERED;
+			u3d->vbus_valid_detect = 0;
+			/* if external vbus detect is not supported,
+			 * we handle it here.
+			 */
+			if (!u3d->vbus) {
+				spin_unlock(&u3d->lock);
+				mv_u3d_vbus_session(&u3d->gadget, 1);
+				spin_lock(&u3d->lock);
+			}
+		} else
+			dev_err(u3d->dev, "vbus bit is not set\n");
+	}
+
+	/* RX data is already in the 16KB FIFO.*/
+	if (status & MV_U3D_USBINT_UNDER_RUN) {
+		trbunderrun = ioread32(&u3d->vuc_regs->trbunderrun);
+		dev_err(u3d->dev, "under run, ep%d\n", trbunderrun);
+		iowrite32(trbunderrun, &u3d->vuc_regs->trbunderrun);
+		mv_u3d_irq_process_error(u3d);
+	}
+
+	if (status & (MV_U3D_USBINT_RXDESC_ERR | MV_U3D_USBINT_TXDESC_ERR)) {
+		/* write one to clear */
+		iowrite32(status & (MV_U3D_USBINT_RXDESC_ERR
+			| MV_U3D_USBINT_TXDESC_ERR),
+			&u3d->vuc_regs->intrcause);
+		dev_err(u3d->dev, "desc err 0x%x\n", status);
+		mv_u3d_irq_process_error(u3d);
+	}
+
+	if (status & MV_U3D_USBINT_LINK_CHG)
+		mv_u3d_irq_process_link_change(u3d);
+
+	if (status & MV_U3D_USBINT_TX_COMPLETE)
+		mv_u3d_irq_process_tr_complete(u3d);
+
+	if (status & MV_U3D_USBINT_RX_COMPLETE)
+		mv_u3d_irq_process_tr_complete(u3d);
+
+	if (status & MV_U3D_USBINT_SETUP)
+		mv_u3d_irq_process_setup(u3d);
+
+	spin_unlock(&u3d->lock);
+	return IRQ_HANDLED;
+}
+
+static void mv_u3d_gadget_release(struct device *dev)
+{
+	dev_dbg(dev, "%s\n", __func__);
+}
+
+static __devexit int mv_u3d_remove(struct platform_device *dev)
+{
+	struct mv_u3d *u3d = platform_get_drvdata(dev);
+
+	BUG_ON(u3d == NULL);
+
+	usb_del_gadget_udc(&u3d->gadget);
+
+	/* free memory allocated in probe */
+	if (u3d->trb_pool)
+		dma_pool_destroy(u3d->trb_pool);
+
+	if (u3d->ep_context)
+		dma_free_coherent(&dev->dev, u3d->ep_context_size,
+			u3d->ep_context, u3d->ep_context_dma);
+
+	kfree(u3d->eps);
+
+	if (u3d->irq)
+		free_irq(u3d->irq, &dev->dev);
+
+	if (u3d->cap_regs)
+		iounmap(u3d->cap_regs);
+	u3d->cap_regs = NULL;
+
+	kfree(u3d->status_req);
+
+	clk_put(u3d->clk);
+
+	device_unregister(&u3d->gadget.dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	kfree(u3d);
+
+	return 0;
+}
+
+static int mv_u3d_probe(struct platform_device *dev)
+{
+	struct mv_u3d *u3d = NULL;
+	struct mv_usb_platform_data *pdata = dev->dev.platform_data;
+	int retval = 0;
+	struct resource *r;
+	size_t size;
+
+	if (!dev->dev.platform_data) {
+		dev_err(&dev->dev, "missing platform_data\n");
+		retval = -ENODEV;
+		goto err_pdata;
+	}
+
+	u3d = kzalloc(sizeof(*u3d), GFP_KERNEL);
+	if (!u3d) {
+		dev_err(&dev->dev, "failed to allocate memory for u3d\n");
+		retval = -ENOMEM;
+		goto err_alloc_private;
+	}
+
+	spin_lock_init(&u3d->lock);
+
+	platform_set_drvdata(dev, u3d);
+
+	u3d->dev = &dev->dev;
+	u3d->vbus = pdata->vbus;
+
+	u3d->clk = clk_get(&dev->dev, pdata->clkname[0]);
+	if (IS_ERR(u3d->clk)) {
+		retval = PTR_ERR(u3d->clk);
+		goto err_get_clk;
+	}
+
+	r = platform_get_resource_byname(dev, IORESOURCE_MEM, "capregs");
+	if (!r) {
+		dev_err(&dev->dev, "no I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto err_get_cap_regs;
+	}
+
+	u3d->cap_regs = (struct mv_u3d_cap_regs __iomem *)
+		ioremap(r->start, resource_size(r));
+	if (!u3d->cap_regs) {
+		dev_err(&dev->dev, "failed to map I/O memory\n");
+		retval = -EBUSY;
+		goto err_map_cap_regs;
+	} else {
+		dev_dbg(&dev->dev, "cap_regs address: 0x%x/0x%x\n",
+			(unsigned int)r->start, (unsigned int)u3d->cap_regs);
+	}
+
+	/* we will access controller register, so enable the u3d controller */
+	clk_enable(u3d->clk);
+
+	if (pdata->phy_init) {
+		retval = pdata->phy_init(u3d->phy_regs);
+		if (retval) {
+			dev_err(&dev->dev, "init phy error %d\n", retval);
+			goto err_u3d_enable;
+		}
+	}
+
+	u3d->op_regs = (struct mv_u3d_op_regs __iomem *)((u32)u3d->cap_regs
+		+ MV_U3D_USB3_OP_REGS_OFFSET);
+
+	u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)((u32)u3d->cap_regs
+		+ ioread32(&u3d->cap_regs->vuoff));
+
+	u3d->max_eps = 16;
+
+	/*
+	 * some platform will use usb to download image, it may not disconnect
+	 * usb gadget before loading kernel. So first stop u3d here.
+	 */
+	mv_u3d_controller_stop(u3d);
+	iowrite32(0xFFFFFFFF, &u3d->vuc_regs->intrcause);
+
+	if (pdata->phy_deinit)
+		pdata->phy_deinit(u3d->phy_regs);
+	clk_disable(u3d->clk);
+
+	size = u3d->max_eps * sizeof(struct mv_u3d_ep_context) * 2;
+	size = (size + MV_U3D_EP_CONTEXT_ALIGNMENT - 1)
+		& ~(MV_U3D_EP_CONTEXT_ALIGNMENT - 1);
+	u3d->ep_context = dma_alloc_coherent(&dev->dev, size,
+					&u3d->ep_context_dma, GFP_KERNEL);
+	if (!u3d->ep_context) {
+		dev_err(&dev->dev, "allocate ep context memory failed\n");
+		retval = -ENOMEM;
+		goto err_alloc_ep_context;
+	}
+	u3d->ep_context_size = size;
+
+	/* create TRB dma_pool resource */
+	u3d->trb_pool = dma_pool_create("u3d_trb",
+			&dev->dev,
+			sizeof(struct mv_u3d_trb_hw),
+			MV_U3D_TRB_ALIGNMENT,
+			MV_U3D_DMA_BOUNDARY);
+
+	if (!u3d->trb_pool) {
+		retval = -ENOMEM;
+		goto err_alloc_trb_pool;
+	}
+
+	size = u3d->max_eps * sizeof(struct mv_u3d_ep) * 2;
+	u3d->eps = kzalloc(size, GFP_KERNEL);
+	if (!u3d->eps) {
+		dev_err(&dev->dev, "allocate ep memory failed\n");
+		retval = -ENOMEM;
+		goto err_alloc_eps;
+	}
+
+	/* initialize ep0 status request structure */
+	u3d->status_req = kzalloc(sizeof(struct mv_u3d_req) + 8, GFP_KERNEL);
+	if (!u3d->status_req) {
+		dev_err(&dev->dev, "allocate status_req memory failed\n");
+		retval = -ENOMEM;
+		goto err_alloc_status_req;
+	}
+	INIT_LIST_HEAD(&u3d->status_req->queue);
+
+	/* allocate a small amount of memory to get valid address */
+	u3d->status_req->req.buf = (char *)u3d->status_req
+					+ sizeof(struct mv_u3d_req);
+	u3d->status_req->req.dma = virt_to_phys(u3d->status_req->req.buf);
+
+	u3d->resume_state = USB_STATE_NOTATTACHED;
+	u3d->usb_state = USB_STATE_ATTACHED;
+	u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+	u3d->remote_wakeup = 0;
+
+	r = platform_get_resource(dev, IORESOURCE_IRQ, 0);
+	if (!r) {
+		dev_err(&dev->dev, "no IRQ resource defined\n");
+		retval = -ENODEV;
+		goto err_get_irq;
+	}
+	u3d->irq = r->start;
+	if (request_irq(u3d->irq, mv_u3d_irq,
+		IRQF_DISABLED | IRQF_SHARED, driver_name, u3d)) {
+		u3d->irq = 0;
+		dev_err(&dev->dev, "Request irq %d for u3d failed\n",
+			u3d->irq);
+		retval = -ENODEV;
+		goto err_request_irq;
+	}
+
+	/* initialize gadget structure */
+	u3d->gadget.ops = &mv_u3d_ops;	/* usb_gadget_ops */
+	u3d->gadget.ep0 = &u3d->eps[1].ep;	/* gadget ep0 */
+	INIT_LIST_HEAD(&u3d->gadget.ep_list);	/* ep_list */
+	u3d->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	dev_set_name(&u3d->gadget.dev, "gadget");
+	u3d->gadget.dev.parent = &dev->dev;
+	u3d->gadget.dev.dma_mask = dev->dev.dma_mask;
+	u3d->gadget.dev.release = mv_u3d_gadget_release;
+	u3d->gadget.name = driver_name;		/* gadget name */
+
+	retval = device_register(&u3d->gadget.dev);
+	if (retval)
+		goto err_register_gadget_device;
+
+	mv_u3d_eps_init(u3d);
+
+	/* external vbus detection */
+	if (u3d->vbus) {
+		u3d->clock_gating = 1;
+		dev_err(&dev->dev, "external vbus detection\n");
+	}
+
+	if (!u3d->clock_gating)
+		u3d->vbus_active = 1;
+
+	/* enable usb3 controller vbus detection */
+	u3d->vbus_valid_detect = 1;
+
+	retval = usb_add_gadget_udc(&dev->dev, &u3d->gadget);
+	if (retval)
+		goto err_unregister;
+
+	dev_dbg(&dev->dev, "successful probe usb3 device %s clock gating.\n",
+		u3d->clock_gating ? "with" : "without");
+
+	return 0;
+
+err_unregister:
+	device_unregister(&u3d->gadget.dev);
+err_register_gadget_device:
+	free_irq(u3d->irq, &dev->dev);
+err_request_irq:
+err_get_irq:
+	kfree(u3d->status_req);
+err_alloc_status_req:
+	kfree(u3d->eps);
+err_alloc_eps:
+	dma_pool_destroy(u3d->trb_pool);
+err_alloc_trb_pool:
+	dma_free_coherent(&dev->dev, u3d->ep_context_size,
+		u3d->ep_context, u3d->ep_context_dma);
+err_alloc_ep_context:
+	if (pdata->phy_deinit)
+		pdata->phy_deinit(u3d->phy_regs);
+	clk_disable(u3d->clk);
+err_u3d_enable:
+	iounmap(u3d->cap_regs);
+err_map_cap_regs:
+err_get_cap_regs:
+err_get_clk:
+	clk_put(u3d->clk);
+	platform_set_drvdata(dev, NULL);
+	kfree(u3d);
+err_alloc_private:
+err_pdata:
+	return retval;
+}
+
+#ifdef CONFIG_PM
+static int mv_u3d_suspend(struct device *dev)
+{
+	struct mv_u3d *u3d = dev_get_drvdata(dev);
+
+	/*
+	 * only cable is unplugged, usb can suspend.
+	 * So do not care about clock_gating == 1, it is handled by
+	 * vbus session.
+	 */
+	if (!u3d->clock_gating) {
+		mv_u3d_controller_stop(u3d);
+
+		spin_lock_irq(&u3d->lock);
+		/* stop all usb activities */
+		mv_u3d_stop_activity(u3d, u3d->driver);
+		spin_unlock_irq(&u3d->lock);
+
+		mv_u3d_disable(u3d);
+	}
+
+	return 0;
+}
+
+static int mv_u3d_resume(struct device *dev)
+{
+	struct mv_u3d *u3d = dev_get_drvdata(dev);
+	int retval;
+
+	if (!u3d->clock_gating) {
+		retval = mv_u3d_enable(u3d);
+		if (retval)
+			return retval;
+
+		if (u3d->driver && u3d->softconnect) {
+			mv_u3d_controller_reset(u3d);
+			mv_u3d_ep0_reset(u3d);
+			mv_u3d_controller_start(u3d);
+		}
+	}
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume);
+#endif
+
+static void mv_u3d_shutdown(struct platform_device *dev)
+{
+	struct mv_u3d *u3d = dev_get_drvdata(&dev->dev);
+	u32 tmp;
+
+	tmp = ioread32(&u3d->op_regs->usbcmd);
+	tmp &= ~MV_U3D_CMD_RUN_STOP;
+	iowrite32(tmp, &u3d->op_regs->usbcmd);
+}
+
+static struct platform_driver mv_u3d_driver = {
+	.probe		= mv_u3d_probe,
+	.remove		= __exit_p(mv_u3d_remove),
+	.shutdown	= mv_u3d_shutdown,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "mv-u3d",
+#ifdef CONFIG_PM
+		.pm	= &mv_u3d_pm_ops,
+#endif
+	},
+};
+
+module_platform_driver(mv_u3d_driver);
+MODULE_ALIAS("platform:mv-u3d");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-70-g09d2


From ba789170d251a3c47854cee8a492d8ba7345f468 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Fri, 15 Jun 2012 18:39:02 -0300
Subject: usb: gadget: fsl_mxc_udc: do not depend on grouped clocks

With the new common clock infrastructure, the following clocks should be
used on i.MX drivers: ipg, per and ahb.

Adapt fsl_mxc_udc to follow this new behaviour to fix the following probe error:

Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007)
fsl-usb2-udc fsl-usb2-udc: clk_get("usb") failed
fsl-usb2-udc: probe of fsl-usb2-udc failed with error -2

Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/fsl_mxc_udc.c | 74 +++++++++++++++++-----------------------
 1 file changed, 31 insertions(+), 43 deletions(-)

diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index f4b5109feb3..1b0f086426b 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -21,7 +21,8 @@
 #include <mach/hardware.h>
 
 static struct clk *mxc_ahb_clk;
-static struct clk *mxc_usb_clk;
+static struct clk *mxc_per_clk;
+static struct clk *mxc_ipg_clk;
 
 /* workaround ENGcm09152 for i.MX35 */
 #define USBPHYCTRL_OTGBASE_OFFSET	0x608
@@ -35,28 +36,31 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 
-	if (!cpu_is_mx35() && !cpu_is_mx25()) {
-		mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
-		if (IS_ERR(mxc_ahb_clk))
-			return PTR_ERR(mxc_ahb_clk);
+	mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(mxc_ipg_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n");
+		return PTR_ERR(mxc_ipg_clk);
+	}
 
-		ret = clk_prepare_enable(mxc_ahb_clk);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
-			goto eenahb;
-		}
+	mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(mxc_ahb_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n");
+		return PTR_ERR(mxc_ahb_clk);
 	}
 
-	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
-	mxc_usb_clk = clk_get(&pdev->dev, "usb");
-	if (IS_ERR(mxc_usb_clk)) {
-		dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
-		ret = PTR_ERR(mxc_usb_clk);
-		goto egusb;
+	mxc_per_clk = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(mxc_per_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
+		return PTR_ERR(mxc_per_clk);
 	}
 
+	clk_prepare_enable(mxc_ipg_clk);
+	clk_prepare_enable(mxc_ahb_clk);
+	clk_prepare_enable(mxc_per_clk);
+
+	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
 	if (!cpu_is_mx51()) {
-		freq = clk_get_rate(mxc_usb_clk);
+		freq = clk_get_rate(mxc_per_clk);
 		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 		    (freq < 59999000 || freq > 60001000)) {
 			dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
@@ -65,24 +69,13 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 		}
 	}
 
-	ret = clk_prepare_enable(mxc_usb_clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
-		goto eenusb;
-	}
-
 	return 0;
 
-eenusb:
 eclkrate:
-	clk_put(mxc_usb_clk);
-	mxc_usb_clk = NULL;
-egusb:
-	if (!cpu_is_mx35())
-		clk_disable_unprepare(mxc_ahb_clk);
-eenahb:
-	if (!cpu_is_mx35())
-		clk_put(mxc_ahb_clk);
+	clk_disable_unprepare(mxc_ipg_clk);
+	clk_disable_unprepare(mxc_ahb_clk);
+	clk_disable_unprepare(mxc_per_clk);
+	mxc_per_clk = NULL;
 	return ret;
 }
 
@@ -104,20 +97,15 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
 
 	/* ULPI transceivers don't need usbpll */
 	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
-		clk_disable_unprepare(mxc_usb_clk);
-		clk_put(mxc_usb_clk);
-		mxc_usb_clk = NULL;
+		clk_disable_unprepare(mxc_per_clk);
+		mxc_per_clk = NULL;
 	}
 }
 
 void fsl_udc_clk_release(void)
 {
-	if (mxc_usb_clk) {
-		clk_disable_unprepare(mxc_usb_clk);
-		clk_put(mxc_usb_clk);
-	}
-	if (!cpu_is_mx35()) {
-		clk_disable_unprepare(mxc_ahb_clk);
-		clk_put(mxc_ahb_clk);
-	}
+	if (mxc_per_clk)
+		clk_disable_unprepare(mxc_per_clk);
+	clk_disable_unprepare(mxc_ahb_clk);
+	clk_disable_unprepare(mxc_ipg_clk);
 }
-- 
cgit v1.2.3-70-g09d2


From 508566998b8de0a95e39da9d35893df9e212328d Mon Sep 17 00:00:00 2001
From: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Date: Wed, 20 Jun 2012 09:03:15 -0300
Subject: usb: gadget: lpc32xx_udc: move clock init to clock framework

Moves clock initialization to the clock framework.

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Acked-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/lpc32xx_udc.c | 84 ++++++++++++----------------------------
 1 file changed, 24 insertions(+), 60 deletions(-)

diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 262acfd53e3..d227d93ce89 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -164,6 +164,7 @@ struct lpc32xx_udc {
 	int			udp_irq[4];
 	struct clk		*usb_pll_clk;
 	struct clk		*usb_slv_clk;
+	struct clk		*usb_otg_clk;
 
 	/* DMA support */
 	u32			*udca_v_base;
@@ -226,33 +227,15 @@ static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g)
 #define UDCA_BUFF_SIZE (128)
 
 /* TODO: When the clock framework is introduced in LPC32xx, IO_ADDRESS will
- * be replaced with an inremap()ed pointer, see USB_OTG_CLK_CTRL()
+ * be replaced with an inremap()ed pointer
  * */
 #define USB_CTRL		IO_ADDRESS(LPC32XX_CLK_PM_BASE + 0x64)
-#define USB_CLOCK_MASK		(AHB_M_CLOCK_ON | OTG_CLOCK_ON | \
-				 DEV_CLOCK_ON | I2C_CLOCK_ON)
 
 /* USB_CTRL bit defines */
 #define USB_SLAVE_HCLK_EN	(1 << 24)
 #define USB_HOST_NEED_CLK_EN	(1 << 21)
 #define USB_DEV_NEED_CLK_EN	(1 << 22)
 
-#define USB_OTG_CLK_CTRL(udc)	((udc)->udp_baseaddr + 0xFF4)
-#define USB_OTG_CLK_STAT(udc)	((udc)->udp_baseaddr + 0xFF8)
-
-/* USB_OTG_CLK_CTRL bit defines */
-#define AHB_M_CLOCK_ON		(1 << 4)
-#define OTG_CLOCK_ON		(1 << 3)
-#define I2C_CLOCK_ON		(1 << 2)
-#define DEV_CLOCK_ON		(1 << 1)
-#define HOST_CLOCK_ON		(1 << 0)
-
-#define USB_OTG_STAT_CONTROL(udc) (udc->udp_baseaddr + 0x110)
-
-/* USB_OTG_STAT_CONTROL bit defines */
-#define TRANSPARENT_I2C_EN	(1 << 7)
-#define HOST_EN			(1 << 0)
-
 /**********************************************************************
  * USB device controller register offsets
  **********************************************************************/
@@ -676,7 +659,7 @@ static void isp1301_udc_configure(struct lpc32xx_udc *udc)
 		ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD);
 
 	/* Enable usb_need_clk clock after transceiver is initialized */
-	writel((readl(USB_CTRL) | (1 << 22)), USB_CTRL);
+	writel((readl(USB_CTRL) | USB_DEV_NEED_CLK_EN), USB_CTRL);
 
 	dev_info(udc->dev, "ISP1301 Vendor ID  : 0x%04x\n",
 		 i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00));
@@ -1009,11 +992,8 @@ static void udc_dd_free(struct lpc32xx_udc *udc, struct lpc32xx_usbd_dd_gad *dd)
 /* Enables or disables most of the USB system clocks when low power mode is
  * needed. Clocks are typically started on a connection event, and disabled
  * when a cable is disconnected */
-#define OTGOFF_CLK_MASK (AHB_M_CLOCK_ON | I2C_CLOCK_ON)
 static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
 {
-	int to = 1000;
-
 	if (enable != 0) {
 		if (udc->clocked)
 			return;
@@ -1027,14 +1007,7 @@ static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
 		writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN,
 			     USB_CTRL);
 
-		/* Set to enable all needed USB OTG clocks */
-		writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc));
-
-		while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) !=
-			USB_CLOCK_MASK) && (to > 0))
-			to--;
-		if (!to)
-			dev_dbg(udc->dev, "Cannot enable USB OTG clocking\n");
+		clk_enable(udc->usb_otg_clk);
 	} else {
 		if (!udc->clocked)
 			return;
@@ -1046,19 +1019,11 @@ static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
 		/* 48MHz PLL dpwn */
 		clk_disable(udc->usb_pll_clk);
 
-		/* Enable the USB device clock */
+		/* Disable the USB device clock */
 		writel(readl(USB_CTRL) & ~USB_DEV_NEED_CLK_EN,
 			     USB_CTRL);
 
-		/* Set to enable all needed USB OTG clocks */
-		writel(OTGOFF_CLK_MASK, USB_OTG_CLK_CTRL(udc));
-
-		while (((readl(USB_OTG_CLK_STAT(udc)) &
-			 OTGOFF_CLK_MASK) !=
-			OTGOFF_CLK_MASK) && (to > 0))
-			to--;
-		if (!to)
-			dev_dbg(udc->dev, "Cannot disable USB OTG clocking\n");
+		clk_disable(udc->usb_otg_clk);
 	}
 }
 
@@ -3238,6 +3203,12 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 		retval = PTR_ERR(udc->usb_slv_clk);
 		goto usb_clk_get_fail;
 	}
+	udc->usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg");
+	if (IS_ERR(udc->usb_otg_clk)) {
+		dev_err(udc->dev, "failed to acquire USB otg clock\n");
+		retval = PTR_ERR(udc->usb_slv_clk);
+		goto usb_otg_clk_get_fail;
+	}
 
 	/* Setup PLL clock to 48MHz */
 	retval = clk_enable(udc->usb_pll_clk);
@@ -3261,15 +3232,12 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 		goto usb_clk_enable_fail;
 	}
 
-	/* Set to enable all needed USB OTG clocks */
-	writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc));
-
-	i = 1000;
-	while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) !=
-		USB_CLOCK_MASK) && (i > 0))
-		i--;
-	if (!i)
-		dev_dbg(udc->dev, "USB OTG clocks not correctly enabled\n");
+	/* Enable USB OTG clock */
+	retval = clk_enable(udc->usb_otg_clk);
+	if (retval < 0) {
+		dev_err(udc->dev, "failed to start USB otg clock\n");
+		goto usb_otg_clk_enable_fail;
+	}
 
 	/* Setup deferred workqueue data */
 	udc->poweron = udc->pullup = 0;
@@ -3389,12 +3357,16 @@ dma_alloc_fail:
 	dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
 			  udc->udca_v_base, udc->udca_p_base);
 i2c_fail:
+	clk_disable(udc->usb_otg_clk);
+usb_otg_clk_enable_fail:
 	clk_disable(udc->usb_slv_clk);
 usb_clk_enable_fail:
 pll_set_fail:
 	clk_disable(udc->usb_pll_clk);
 pll_enable_fail:
 	clk_put(udc->usb_slv_clk);
+usb_otg_clk_get_fail:
+	clk_put(udc->usb_otg_clk);
 usb_clk_get_fail:
 	clk_put(udc->usb_pll_clk);
 pll_get_fail:
@@ -3432,6 +3404,8 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev)
 
 	device_unregister(&udc->gadget.dev);
 
+	clk_disable(udc->usb_otg_clk);
+	clk_put(udc->usb_otg_clk);
 	clk_disable(udc->usb_slv_clk);
 	clk_put(udc->usb_slv_clk);
 	clk_disable(udc->usb_pll_clk);
@@ -3445,7 +3419,6 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	int to = 1000;
 	struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
 
 	if (udc->clocked) {
@@ -3460,15 +3433,6 @@ static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 		   on resume */
 		udc->clocked = 1;
 
-		/* Kill OTG and I2C clocks */
-		writel(0, USB_OTG_CLK_CTRL(udc));
-		while (((readl(USB_OTG_CLK_STAT(udc)) & OTGOFF_CLK_MASK) !=
-			OTGOFF_CLK_MASK) && (to > 0))
-			to--;
-		if (!to)
-			dev_dbg(udc->dev,
-				"USB OTG clocks not correctly enabled\n");
-
 		/* Kill global USB clock */
 		clk_disable(udc->usb_slv_clk);
 	}
-- 
cgit v1.2.3-70-g09d2


From 6f47209b271661ecd5929397cbe646ff247f01b6 Mon Sep 17 00:00:00 2001
From: Steve Bennett <steveb@workware.net.au>
Date: Fri, 22 Jun 2012 14:16:19 +1000
Subject: usb: gadget: acm_ms: need to set max_speed

Failing to set max_speed prevents g_acm_ms working with many drivers which
check for driver->max_speed < USB_SPEED_FULL, including pxa25x_udc

Signed-off-by: Steve Bennett <steveb@workware.net.au>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/acm_ms.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index fdb7aec3bd0..75b8a691fd0 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -235,6 +235,7 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)
 static struct usb_composite_driver acm_ms_driver = {
 	.name		= "g_acm_ms",
 	.dev		= &device_desc,
+	.max_speed	= USB_SPEED_SUPER,
 	.strings	= dev_strings,
 	.unbind		= __exit_p(acm_ms_unbind),
 };
-- 
cgit v1.2.3-70-g09d2


From f87cabf4d56e1fc5d08434df9d54ef3450a756f0 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <mina86@mina86.com>
Date: Mon, 18 Jun 2012 14:37:19 +0200
Subject: usb: gadget: storage_common: remove FSG_BUFFHD_STATIC_BUFFER support

Since f_mass_storage stopped using FSG_BUFFHD_STATIC_BUFFER (because it
caused buffers not to be page aligned which did not work well with at
least some UDCs), no code was using it.  Removing not to bloat the code
too much.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/storage_common.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 8081ca3a70a..8a8157f96a2 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -37,12 +37,6 @@
  * When FSG_NO_OTG is defined fsg_otg_desc won't be defined.
  */
 
-/*
- * When FSG_BUFFHD_STATIC_BUFFER is defined when this file is included
- * the fsg_buffhd structure's buf field will be an array of FSG_BUFLEN
- * characters rather then a pointer to void.
- */
-
 /*
  * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers
  * sets the number of pipeline buffers (length of the fsg_buffhd array).
@@ -260,11 +254,7 @@ enum fsg_buffer_state {
 };
 
 struct fsg_buffhd {
-#ifdef FSG_BUFFHD_STATIC_BUFFER
-	char				buf[FSG_BUFLEN];
-#else
 	void				*buf;
-#endif
 	enum fsg_buffer_state		state;
 	struct fsg_buffhd		*next;
 
-- 
cgit v1.2.3-70-g09d2


From d6e16a89578fcc8834be634c85c5c5ddc2d13229 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <mina86@mina86.com>
Date: Mon, 18 Jun 2012 14:37:20 +0200
Subject: usb: gadget: mass_storage: fail fsg_store_file() early if colud not
 open file
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Currently, when a new value is stored to the “file” sysfs entry,
fsg_store_file() will release existing backing file and only then attempt to
open a new one.  If that fails, no new backing file is open.

This commit changes the fsg_lun_open() so that it closes existing backing file
only after the new backing file has been successfully opened.  With that
change, fsg_store_file() may use it to perform an atomic open operation with
guarantee that logical unit will either point to the new backing file or still
to the old one.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/storage_common.c | 52 +++++++++++++++++++++----------------
 1 file changed, 29 insertions(+), 23 deletions(-)

diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 8a8157f96a2..e576678fb62 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -617,6 +617,16 @@ static struct usb_gadget_strings	fsg_stringtab = {
  * the caller must own fsg->filesem for writing.
  */
 
+static void fsg_lun_close(struct fsg_lun *curlun)
+{
+	if (curlun->filp) {
+		LDBG(curlun, "close backing file\n");
+		fput(curlun->filp);
+		curlun->filp = NULL;
+	}
+}
+
+
 static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 {
 	int				ro;
@@ -626,6 +636,8 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 	loff_t				size;
 	loff_t				num_sectors;
 	loff_t				min_sectors;
+	unsigned int			blkbits;
+	unsigned int			blksize;
 
 	/* R/W if we can, R/O if we must */
 	ro = curlun->initially_ro;
@@ -670,17 +682,17 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 	}
 
 	if (curlun->cdrom) {
-		curlun->blksize = 2048;
-		curlun->blkbits = 11;
+		blksize = 2048;
+		blkbits = 11;
 	} else if (inode->i_bdev) {
-		curlun->blksize = bdev_logical_block_size(inode->i_bdev);
-		curlun->blkbits = blksize_bits(curlun->blksize);
+		blksize = bdev_logical_block_size(inode->i_bdev);
+		blkbits = blksize_bits(blksize);
 	} else {
-		curlun->blksize = 512;
-		curlun->blkbits = 9;
+		blksize = 512;
+		blkbits = 9;
 	}
 
-	num_sectors = size >> curlun->blkbits; /* File size in logic-block-size blocks */
+	num_sectors = size >> blkbits; /* File size in logic-block-size blocks */
 	min_sectors = 1;
 	if (curlun->cdrom) {
 		min_sectors = 300;	/* Smallest track is 300 frames */
@@ -697,7 +709,12 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 		goto out;
 	}
 
+	if (fsg_lun_is_open(curlun))
+		fsg_lun_close(curlun);
+
 	get_file(filp);
+	curlun->blksize = blksize;
+	curlun->blkbits = blkbits;
 	curlun->ro = ro;
 	curlun->filp = filp;
 	curlun->file_length = size;
@@ -711,16 +728,6 @@ out:
 }
 
 
-static void fsg_lun_close(struct fsg_lun *curlun)
-{
-	if (curlun->filp) {
-		LDBG(curlun, "close backing file\n");
-		fput(curlun->filp);
-		curlun->filp = NULL;
-	}
-}
-
-
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -871,19 +878,18 @@ static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr,
 	if (count > 0 && buf[count-1] == '\n')
 		((char *) buf)[count-1] = 0;		/* Ugh! */
 
-	/* Eject current medium */
-	down_write(filesem);
-	if (fsg_lun_is_open(curlun)) {
-		fsg_lun_close(curlun);
-		curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
-	}
 
 	/* Load new medium */
+	down_write(filesem);
 	if (count > 0 && buf[0]) {
+		/* fsg_lun_open() will close existing file if any. */
 		rc = fsg_lun_open(curlun, buf);
 		if (rc == 0)
 			curlun->unit_attention_data =
 					SS_NOT_READY_TO_READY_TRANSITION;
+	} else if (fsg_lun_is_open(curlun)) {
+		fsg_lun_close(curlun);
+		curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
 	}
 	up_write(filesem);
 	return (rc < 0 ? rc : count);
-- 
cgit v1.2.3-70-g09d2


From a188b6897e3dca82dd6f5beceabf1fc62b9786d9 Mon Sep 17 00:00:00 2001
From: Lukasz Majewski <l.majewski@samsung.com>
Date: Fri, 22 Jun 2012 09:29:56 +0200
Subject: usb: gadget: hsotg: pullup method implementation for s3c-hsotg UDC
 driver

This commit adds pullup method implementation for UDC s3c-hsotg driver.
It is needed for e.g. CCG - Configurable Composite Gadget, when user space
configuration change request device disconnection from USB bus (done via
calling usb_gadget_connect/disconnect, which calls UDC's pullup method).

Implementation of pullup method has caused removal of phy_enable and
core_init methods from udc_start to pullup.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c-hsotg.c | 33 ++++++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index d208c46341d..75a28e6d376 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2963,9 +2963,6 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
 		goto err;
 	}
 
-	s3c_hsotg_phy_enable(hsotg);
-
-	s3c_hsotg_core_init(hsotg);
 	hsotg->last_rst = jiffies;
 	dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
 	return 0;
@@ -3028,10 +3025,40 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
 	return s3c_hsotg_read_frameno(to_hsotg(gadget));
 }
 
+/**
+ * s3c_hsotg_pullup - connect/disconnect the USB PHY
+ * @gadget: The usb gadget state
+ * @is_on: Current state of the USB PHY
+ *
+ * Connect/Disconnect the USB PHY pullup
+ */
+static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct s3c_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags = 0;
+
+	dev_dbg(hsotg->dev, "%s: is_in: %d\n", __func__, is_on);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	if (is_on) {
+		s3c_hsotg_phy_enable(hsotg);
+		s3c_hsotg_core_init(hsotg);
+	} else {
+		s3c_hsotg_disconnect(hsotg);
+		s3c_hsotg_phy_disable(hsotg);
+	}
+
+	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+}
+
 static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
 	.get_frame	= s3c_hsotg_gadget_getframe,
 	.udc_start		= s3c_hsotg_udc_start,
 	.udc_stop		= s3c_hsotg_udc_stop,
+	.pullup                 = s3c_hsotg_pullup,
 };
 
 /**
-- 
cgit v1.2.3-70-g09d2


From 31bde1ceaa873bcaecd49e829bfabceacc4c512d Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Sun, 24 Jun 2012 21:11:22 -0700
Subject: usb: gadget: Fix g_ether interface link status

A "usb0" interface that has never been connected to a host has an unknown
operstate, and therefore the IFF_RUNNING flag is (incorrectly) asserted
when queried by ifconfig, ifplugd, etc.  This is a result of calling
netif_carrier_off() too early in the probe function; it should be called
after register_netdev().

Similar problems have been fixed in many other drivers, e.g.:

    e826eafa6 (bonding: Call netif_carrier_off after register_netdevice)
    0d672e9f8 (drivers/net: Call netif_carrier_off at the end of the probe)
    6a3c869a6 (cxgb4: fix reported state of interfaces without link)

Fix is to move netif_carrier_off() to the end of the function.

Cc: stable@vger.kernel.org
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/u_ether.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 47cf48b51c9..5b46f022d0f 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -798,12 +798,6 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
 
 	SET_ETHTOOL_OPS(net, &ops);
 
-	/* two kinds of host-initiated state changes:
-	 *  - iff DATA transfer is active, carrier is "on"
-	 *  - tx queueing enabled if open *and* carrier is "on"
-	 */
-	netif_carrier_off(net);
-
 	dev->gadget = g;
 	SET_NETDEV_DEV(net, &g->dev);
 	SET_NETDEV_DEVTYPE(net, &gadget_type);
@@ -817,6 +811,12 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
 		INFO(dev, "HOST MAC %pM\n", dev->host_mac);
 
 		the_dev = dev;
+
+		/* two kinds of host-initiated state changes:
+		 *  - iff DATA transfer is active, carrier is "on"
+		 *  - tx queueing enabled if open *and* carrier is "on"
+		 */
+		netif_carrier_off(net);
 	}
 
 	return status;
-- 
cgit v1.2.3-70-g09d2


From 48a31af74404e6460eabca410bf0b4a625bfd372 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <mina86@mina86.com>
Date: Mon, 25 Jun 2012 16:40:22 +0200
Subject: usb: gadget: mass_storage: make "file" and "ro" read only in some
 cases
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The “file” sysfs entry for LUNs was writable even for non-removable
LUNs and the fsg_store_file() function did not check whether LUN is
removable or not.  This made it possible to change or even close
LUN's backing file.

The same is true for “ro” sysfs entry and LUNs simulating CD-ROM.
For those LUNs, the file should not be writable.

This commit introduces two new device_attribute structures for those
two special cases so that the file/ro sysfs entries are made
non-writable when not desired.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/f_mass_storage.c | 26 +++++++++++++++++++++-----
 drivers/usb/gadget/storage_common.c |  1 -
 2 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 7ad4f819752..4f1142efa6d 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2609,11 +2609,15 @@ static int fsg_main_thread(void *common_)
 
 /*************************** DEVICE ATTRIBUTES ***************************/
 
-/* Write permission is checked per LUN in store_*() functions. */
 static DEVICE_ATTR(ro, 0644, fsg_show_ro, fsg_store_ro);
 static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, fsg_store_nofua);
 static DEVICE_ATTR(file, 0644, fsg_show_file, fsg_store_file);
 
+static struct device_attribute dev_attr_ro_cdrom =
+	__ATTR(ro, 0444, fsg_show_ro, NULL);
+static struct device_attribute dev_attr_file_nonremovable =
+	__ATTR(file, 0444, fsg_show_file, NULL);
+
 
 /****************************** FSG COMMON ******************************/
 
@@ -2724,10 +2728,16 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 			goto error_release;
 		}
 
-		rc = device_create_file(&curlun->dev, &dev_attr_ro);
+		rc = device_create_file(&curlun->dev,
+					curlun->cdrom
+				      ? &dev_attr_ro_cdrom
+				      : &dev_attr_ro);
 		if (rc)
 			goto error_luns;
-		rc = device_create_file(&curlun->dev, &dev_attr_file);
+		rc = device_create_file(&curlun->dev,
+					curlun->removable
+				      ? &dev_attr_file
+				      : &dev_attr_file_nonremovable);
 		if (rc)
 			goto error_luns;
 		rc = device_create_file(&curlun->dev, &dev_attr_nofua);
@@ -2862,8 +2872,14 @@ static void fsg_common_release(struct kref *ref)
 		/* In error recovery common->nluns may be zero. */
 		for (; i; --i, ++lun) {
 			device_remove_file(&lun->dev, &dev_attr_nofua);
-			device_remove_file(&lun->dev, &dev_attr_ro);
-			device_remove_file(&lun->dev, &dev_attr_file);
+			device_remove_file(&lun->dev,
+					   lun->cdrom
+					 ? &dev_attr_ro_cdrom
+					 : &dev_attr_ro);
+			device_remove_file(&lun->dev,
+					   lun->removable
+					 ? &dev_attr_file
+					 : &dev_attr_file_nonremovable);
 			fsg_lun_close(lun);
 			device_unregister(&lun->dev);
 		}
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index e576678fb62..ae8b18869b8 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -878,7 +878,6 @@ static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr,
 	if (count > 0 && buf[count-1] == '\n')
 		((char *) buf)[count-1] = 0;		/* Ugh! */
 
-
 	/* Load new medium */
 	down_write(filesem);
 	if (count > 0 && buf[0]) {
-- 
cgit v1.2.3-70-g09d2


From eebc0d368f2ecbe34860b74e28c29069707d2057 Mon Sep 17 00:00:00 2001
From: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Date: Tue, 26 Jun 2012 11:27:09 -0300
Subject: usb: gadget: lpc32xx_udc: Propagate devicetree to gadget drivers

Fill dev.of_node of gadget drivers, so they can use devicetree

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/lpc32xx_udc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index d227d93ce89..8424947838a 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -3005,6 +3005,7 @@ static int lpc32xx_start(struct usb_gadget_driver *driver,
 
 	udc->driver = driver;
 	udc->gadget.dev.driver = &driver->driver;
+	udc->gadget.dev.of_node = udc->dev->of_node;
 	udc->enabled = 1;
 	udc->selfpowered = 1;
 	udc->vbus = 0;
-- 
cgit v1.2.3-70-g09d2


From 7d7b22928b900bcb0f8885a95846e5125a757e76 Mon Sep 17 00:00:00 2001
From: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Date: Tue, 26 Jun 2012 11:27:10 -0300
Subject: usb: gadget: s3c-hsotg: Propagate devicetree to gadget drivers

Fill dev.of_node of gadget drivers, so they can use devicetree

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c-hsotg.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 75a28e6d376..b13e0bb5f5b 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2953,6 +2953,7 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
 	driver->driver.bus = NULL;
 	hsotg->driver = driver;
 	hsotg->gadget.dev.driver = &driver->driver;
+	hsotg->gadget.dev.of_node = hsotg->dev->of_node;
 	hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask;
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
 
-- 
cgit v1.2.3-70-g09d2


From cb4baf104b11458400941f6d843ed22e122bba2d Mon Sep 17 00:00:00 2001
From: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Date: Tue, 26 Jun 2012 11:27:11 -0300
Subject: usb: gadget: fsl_udc: Propagate devicetree to gadget drivers

Fill dev.of_node of gadget drivers, so they can use devicetree

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/fsl_udc_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 28316858208..df9fe1cccfe 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -2560,6 +2560,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 	dev_set_name(&udc_controller->gadget.dev, "gadget");
 	udc_controller->gadget.dev.release = fsl_udc_release;
 	udc_controller->gadget.dev.parent = &pdev->dev;
+	udc_controller->gadget.dev.of_node = pdev->dev.of_node;
 	ret = device_register(&udc_controller->gadget.dev);
 	if (ret < 0)
 		goto err_free_irq;
-- 
cgit v1.2.3-70-g09d2


From 65c84ea18b1b4b8c03fb67c3bea023ed1446bd2e Mon Sep 17 00:00:00 2001
From: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Date: Tue, 26 Jun 2012 11:27:12 -0300
Subject: usb: gadget: at91_udc: Propagate devicetree to gadget drivers

Fill dev.of_node of gadget drivers, so they can use devicetree

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/at91_udc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 1a4430f315c..c9e66dfb02e 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1634,6 +1634,7 @@ static int at91_start(struct usb_gadget *gadget,
 	udc = container_of(gadget, struct at91_udc, gadget);
 	udc->driver = driver;
 	udc->gadget.dev.driver = &driver->driver;
+	udc->gadget.dev.of_node = udc->pdev->dev.of_node;
 	dev_set_drvdata(&udc->gadget.dev, &driver->driver);
 	udc->enabled = 1;
 	udc->selfpowered = 1;
-- 
cgit v1.2.3-70-g09d2