From 14baf9d7f275f0bbf42c1216ff1eef1109ca42ba Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 24 May 2010 16:31:08 +0900
Subject: serial: sh-sci: fix up serial DMA build.

asm/dmaengine.h no longer exists, update for the shared linux/sh_dma.h
header.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 include/linux/serial_sci.h | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index f5364a1de68..baed2122c5a 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -2,9 +2,7 @@
 #define __LINUX_SERIAL_SCI_H
 
 #include <linux/serial_core.h>
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-#include <asm/dmaengine.h>
-#endif
+#include <linux/sh_dma.h>
 
 /*
  * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
-- 
cgit v1.2.3-70-g09d2


From e1f42ff4f06e5feaa57a22556ad977ef62164e14 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Mon, 24 May 2010 07:53:24 +0000
Subject: fbdev: fix erroneous index in drivers/video/sh_mobile_lcdcfb.c

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sh_mobile_lcdcfb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index e8c76994481..12c451a711e 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -991,13 +991,13 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		priv->ch[j].lcdc = priv;
 		memcpy(&priv->ch[j].cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
 
-		error = sh_mobile_lcdc_check_interface(&priv->ch[i]);
+		error = sh_mobile_lcdc_check_interface(&priv->ch[j]);
 		if (error) {
 			dev_err(&pdev->dev, "unsupported interface type\n");
 			goto err1;
 		}
-		init_waitqueue_head(&priv->ch[i].frame_end_wait);
-		init_completion(&priv->ch[i].vsync_completion);
+		init_waitqueue_head(&priv->ch[j].frame_end_wait);
+		init_completion(&priv->ch[j].vsync_completion);
 		priv->ch[j].pan_offset = 0;
 
 		switch (pdata->ch[i].chan) {
-- 
cgit v1.2.3-70-g09d2


From 8a37f520523df971bd3f926d8bd45ead37e857e8 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 25 May 2010 16:16:40 +0900
Subject: sh: handle early calls to return_address() when using dwarf unwinder.

The dwarf unwinder ties in to an early initcall, but it's possible that
return_address() calls will be made prior to that. This implements some
additional error handling in to the dwarf unwinder as well as an exit
path in the return_address() case to bail out if the unwinder hasn't come
up yet.

This fixes a NULL pointer deref in early boot when mempool_alloc() blows
up on the not-yet-ready mempool via dwarf_unwind_stack().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c          | 19 +++++++++++++++++--
 arch/sh/kernel/return_address.c |  2 ++
 2 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 886d7d83ace..49c09c7d5b7 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -49,6 +49,8 @@ static DEFINE_SPINLOCK(dwarf_fde_lock);
 
 static struct dwarf_cie *cached_cie;
 
+static unsigned int dwarf_unwinder_ready;
+
 /**
  *	dwarf_frame_alloc_reg - allocate memory for a DWARF register
  *	@frame: the DWARF frame whose list of registers we insert on
@@ -581,6 +583,13 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	struct dwarf_reg *reg;
 	unsigned long addr;
 
+	/*
+	 * If we've been called in to before initialization has
+	 * completed, bail out immediately.
+	 */
+	if (!dwarf_unwinder_ready)
+		return NULL;
+
 	/*
 	 * If we're starting at the top of the stack we need get the
 	 * contents of a physical register to get the CFA in order to
@@ -1167,7 +1176,7 @@ void module_dwarf_cleanup(struct module *mod)
  */
 static int __init dwarf_unwinder_init(void)
 {
-	int err;
+	int err = -ENOMEM;
 
 	dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
 			sizeof(struct dwarf_frame), 0,
@@ -1181,11 +1190,15 @@ static int __init dwarf_unwinder_init(void)
 					  mempool_alloc_slab,
 					  mempool_free_slab,
 					  dwarf_frame_cachep);
+	if (!dwarf_frame_pool)
+		goto out;
 
 	dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ,
 					 mempool_alloc_slab,
 					 mempool_free_slab,
 					 dwarf_reg_cachep);
+	if (!dwarf_reg_pool)
+		goto out;
 
 	err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL);
 	if (err)
@@ -1195,11 +1208,13 @@ static int __init dwarf_unwinder_init(void)
 	if (err)
 		goto out;
 
+	dwarf_unwinder_ready = 1;
+
 	return 0;
 
 out:
 	printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
 	dwarf_unwinder_cleanup();
-	return -EINVAL;
+	return err;
 }
 early_initcall(dwarf_unwinder_init);
diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c
index cbf1dd5372b..5124aeb28c3 100644
--- a/arch/sh/kernel/return_address.c
+++ b/arch/sh/kernel/return_address.c
@@ -24,6 +24,8 @@ void *return_address(unsigned int depth)
 		struct dwarf_frame *tmp;
 
 		tmp = dwarf_unwind_stack(ra, frame);
+		if (!tmp)
+			return NULL;
 
 		if (frame)
 			dwarf_free_frame(frame);
-- 
cgit v1.2.3-70-g09d2


From 4b3fb4e79cc3e40ec033a77f1b3d81e7851a6cf5 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 25 May 2010 19:47:12 +0900
Subject: input: serio: disable i8042 for non-cayman sh platforms.

The sh64 cayman platform is the only sh board that ships with an i8042,
so we just hide it for all of the others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/input/serio/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index f34f1dbeb57..3bfe8fafc6a 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -21,7 +21,8 @@ if SERIO
 config SERIO_I8042
 	tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
 	default y
-	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN
+	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
+		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN
 	help
 	  i8042 is the chip over which the standard AT keyboard and PS/2
 	  mouse are connected to the computer. If you use these devices,
-- 
cgit v1.2.3-70-g09d2


From a41a7b91772da2c77ac0da74285fd8ebd86a85ba Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Tue, 25 May 2010 14:07:25 +0000
Subject: sh: remove duplicated #include

Remove duplicated #include('s) in
  arch/sh/boards/mach-ecovec24/setup.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 49714258732..3845258242a 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -26,7 +26,6 @@
 #include <linux/mmc/host.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
-#include <linux/mfd/sh_mobile_sdhi.h>
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
-- 
cgit v1.2.3-70-g09d2


From 1238c684325d9710544af6f0d11bf7cd6efd5925 Mon Sep 17 00:00:00 2001
From: Yusuke Goda <yusuke.goda.sx@renesas.com>
Date: Tue, 27 Apr 2010 10:15:32 +0000
Subject: sh: Add support MMCIF for ecovec

This patch adds MMCIF platform data for the Ecovec board.

Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 86 +++++++++++++++++++++++++++++++++++-
 1 file changed, 84 insertions(+), 2 deletions(-)

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 3845258242a..778eb7cb987 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -12,6 +12,8 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
@@ -435,7 +437,7 @@ static struct i2c_board_info ts_i2c_clients = {
 };
 
 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
-/* SHDI0 */
+/* SDHI0 */
 static void sdhi0_set_pwr(struct platform_device *pdev, int state)
 {
 	gpio_set_value(GPIO_PTB6, state);
@@ -473,7 +475,8 @@ static struct platform_device sdhi0_device = {
 	},
 };
 
-/* SHDI1 */
+#if !defined(CONFIG_MMC_SH_MMCIF)
+/* SDHI1 */
 static void sdhi1_set_pwr(struct platform_device *pdev, int state)
 {
 	gpio_set_value(GPIO_PTB7, state);
@@ -510,6 +513,7 @@ static struct platform_device sdhi1_device = {
 		.hwblk_id = HWBLK_SDHI1,
 	},
 };
+#endif /* CONFIG_MMC_SH_MMCIF */
 
 #else
 
@@ -818,6 +822,58 @@ static struct platform_device vou_device = {
 	},
 };
 
+#if defined(CONFIG_MMC_SH_MMCIF)
+/* SH_MMCIF */
+static void mmcif_set_pwr(struct platform_device *pdev, int state)
+{
+	gpio_set_value(GPIO_PTB7, state);
+}
+
+static void mmcif_down_pwr(struct platform_device *pdev)
+{
+	gpio_set_value(GPIO_PTB7, 0);
+}
+
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "SH_MMCIF",
+		.start	= 0xA4CA0000,
+		.end	= 0xA4CA00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC2I */
+		.start	= 29,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC3I */
+		.start	= 30,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.set_pwr	= mmcif_set_pwr,
+	.down_pwr	= mmcif_down_pwr,
+	.sup_pclk	= 0, /* SH7724: Max Pclk/2 */
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+#endif
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
@@ -830,7 +886,9 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&keysc_device,
 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
 	&sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF)
 	&sdhi1_device,
+#endif
 #else
 	&msiof0_device,
 #endif
@@ -840,6 +898,9 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&fsi_device,
 	&irda_device,
 	&vou_device,
+#if defined(CONFIG_MMC_SH_MMCIF)
+	&sh_mmcif_device,
+#endif
 };
 
 #ifdef CONFIG_I2C
@@ -1133,6 +1194,7 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_PTB6, NULL);
 	gpio_direction_output(GPIO_PTB6, 0);
 
+#if !defined(CONFIG_MMC_SH_MMCIF)
 	/* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
 	gpio_request(GPIO_FN_SDHI1CD,  NULL);
 	gpio_request(GPIO_FN_SDHI1WP,  NULL);
@@ -1147,6 +1209,7 @@ static int __init arch_setup(void)
 
 	/* I/O buffer drive ability is high for SDHI1 */
 	__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#endif /* CONFIG_MMC_SH_MMCIF */
 #else
 	/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
 	gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
@@ -1222,6 +1285,25 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_PTU5, NULL);
 	gpio_direction_output(GPIO_PTU5, 0);
 
+#if defined(CONFIG_MMC_SH_MMCIF)
+	/* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
+	gpio_request(GPIO_FN_MMC_D7, NULL);
+	gpio_request(GPIO_FN_MMC_D6, NULL);
+	gpio_request(GPIO_FN_MMC_D5, NULL);
+	gpio_request(GPIO_FN_MMC_D4, NULL);
+	gpio_request(GPIO_FN_MMC_D3, NULL);
+	gpio_request(GPIO_FN_MMC_D2, NULL);
+	gpio_request(GPIO_FN_MMC_D1, NULL);
+	gpio_request(GPIO_FN_MMC_D0, NULL);
+	gpio_request(GPIO_FN_MMC_CLK, NULL);
+	gpio_request(GPIO_FN_MMC_CMD, NULL);
+	gpio_request(GPIO_PTB7, NULL);
+	gpio_direction_output(GPIO_PTB7, 0);
+
+	/* I/O buffer drive ability is high for MMCIF */
+	__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#endif
+
 	/* enable I2C device */
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));
-- 
cgit v1.2.3-70-g09d2


From b34bce45530ca897aea35915e0e42eb3c8047b52 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 18 May 2010 14:42:40 +0000
Subject: sh: allow romImage data between head.S and the zero page

Extend the romImage code to allow putting data between
the head.S file and the empty_zero_page. Needed in the
case of more advanced loader code in a separate C file.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boot/romimage/head.S      | 12 +++++++++---
 arch/sh/boot/romimage/vmlinux.scr |  1 +
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
index 93e779a405e..65b8256d81c 100644
--- a/arch/sh/boot/romimage/head.S
+++ b/arch/sh/boot/romimage/head.S
@@ -13,7 +13,9 @@ romstart:
 #include <mach/romimage.h>
 
 	/* copy the empty_zero_page contents to where vmlinux expects it */
-	mova	empty_zero_page_src, r0
+	mova	extra_data_pos, r0
+	mov.l	extra_data_size, r1
+	add	r1, r0
 	mov.l	empty_zero_page_dst, r1
 	mov	#(PAGE_SHIFT - 4), r4
 	mov	#1, r3
@@ -37,7 +39,9 @@ romstart:
 	mov	#PAGE_SHIFT, r4
 	mov	#1, r1
 	shld	r4, r1
-	mova	empty_zero_page_src, r0
+	mova	extra_data_pos, r0
+	add	r1, r0
+	mov.l	extra_data_size, r1
 	add	r1, r0
 	jmp	@r0
 	 nop
@@ -45,4 +49,6 @@ romstart:
 	.align 2
 empty_zero_page_dst:
 	.long	_text
-empty_zero_page_src:
+extra_data_pos:
+extra_data_size:
+	.long	zero_page_pos - extra_data_pos
diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr
index 287c08f8b4b..ea27298a99a 100644
--- a/arch/sh/boot/romimage/vmlinux.scr
+++ b/arch/sh/boot/romimage/vmlinux.scr
@@ -1,6 +1,7 @@
 SECTIONS
 {
   .text : {
+	zero_page_pos = .;
 	*(.data)
 	}
 }
-- 
cgit v1.2.3-70-g09d2


From 487d9fc5016529d7d77dfe35b666fd3a090e2953 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 18 May 2010 14:42:51 +0000
Subject: sh: prepare MMCIF driver header file

Update the MMCIF driver to include register information
and register access functions in the header file.
The MMCIF boot code builds on top of this.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/mmc/host/sh_mmcif.c  | 125 +++++++++++++++++--------------------------
 include/linux/mmc/sh_mmcif.h |  32 +++++++++++
 2 files changed, 82 insertions(+), 75 deletions(-)

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index eb97830c034..5d3f824bb5a 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -30,25 +30,6 @@
 #define DRIVER_NAME	"sh_mmcif"
 #define DRIVER_VERSION	"2010-04-28"
 
-#define MMCIF_CE_CMD_SET	0x00000000
-#define MMCIF_CE_ARG		0x00000008
-#define MMCIF_CE_ARG_CMD12	0x0000000C
-#define MMCIF_CE_CMD_CTRL	0x00000010
-#define MMCIF_CE_BLOCK_SET	0x00000014
-#define MMCIF_CE_CLK_CTRL	0x00000018
-#define MMCIF_CE_BUF_ACC	0x0000001C
-#define MMCIF_CE_RESP3		0x00000020
-#define MMCIF_CE_RESP2		0x00000024
-#define MMCIF_CE_RESP1		0x00000028
-#define MMCIF_CE_RESP0		0x0000002C
-#define MMCIF_CE_RESP_CMD12	0x00000030
-#define MMCIF_CE_DATA		0x00000034
-#define MMCIF_CE_INT		0x00000040
-#define MMCIF_CE_INT_MASK	0x00000044
-#define MMCIF_CE_HOST_STS1	0x00000048
-#define MMCIF_CE_HOST_STS2	0x0000004C
-#define MMCIF_CE_VERSION	0x0000007C
-
 /* CE_CMD_SET */
 #define CMD_MASK		0x3f000000
 #define CMD_SET_RTYP_NO		((0 << 23) | (0 << 22))
@@ -207,27 +188,17 @@ struct sh_mmcif_host {
 	wait_queue_head_t intr_wait;
 };
 
-static inline u32 sh_mmcif_readl(struct sh_mmcif_host *host, unsigned int reg)
-{
-	return readl(host->addr + reg);
-}
-
-static inline void sh_mmcif_writel(struct sh_mmcif_host *host,
-					unsigned int reg, u32 val)
-{
-	writel(val, host->addr + reg);
-}
 
 static inline void sh_mmcif_bitset(struct sh_mmcif_host *host,
 					unsigned int reg, u32 val)
 {
-	writel(val | sh_mmcif_readl(host, reg), host->addr + reg);
+	writel(val | readl(host->addr + reg), host->addr + reg);
 }
 
 static inline void sh_mmcif_bitclr(struct sh_mmcif_host *host,
 					unsigned int reg, u32 val)
 {
-	writel(~val & sh_mmcif_readl(host, reg), host->addr + reg);
+	writel(~val & readl(host->addr + reg), host->addr + reg);
 }
 
 
@@ -253,10 +224,10 @@ static void sh_mmcif_sync_reset(struct sh_mmcif_host *host)
 {
 	u32 tmp;
 
-	tmp = 0x010f0000 & sh_mmcif_readl(host, MMCIF_CE_CLK_CTRL);
+	tmp = 0x010f0000 & sh_mmcif_readl(host->addr, MMCIF_CE_CLK_CTRL);
 
-	sh_mmcif_writel(host, MMCIF_CE_VERSION, SOFT_RST_ON);
-	sh_mmcif_writel(host, MMCIF_CE_VERSION, SOFT_RST_OFF);
+	sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_ON);
+	sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_OFF);
 	sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, tmp |
 		SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
 	/* byte swap on */
@@ -271,12 +242,10 @@ static int sh_mmcif_error_manage(struct sh_mmcif_host *host)
 	host->sd_error = 0;
 	host->wait_int = 0;
 
-	state1 = sh_mmcif_readl(host, MMCIF_CE_HOST_STS1);
-	state2 = sh_mmcif_readl(host, MMCIF_CE_HOST_STS2);
-	pr_debug("%s: ERR HOST_STS1 = %08x\n", \
-			DRIVER_NAME, sh_mmcif_readl(host, MMCIF_CE_HOST_STS1));
-	pr_debug("%s: ERR HOST_STS2 = %08x\n", \
-			DRIVER_NAME, sh_mmcif_readl(host, MMCIF_CE_HOST_STS2));
+	state1 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1);
+	state2 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS2);
+	pr_debug("%s: ERR HOST_STS1 = %08x\n", DRIVER_NAME, state1);
+	pr_debug("%s: ERR HOST_STS2 = %08x\n", DRIVER_NAME, state2);
 
 	if (state1 & STS1_CMDSEQ) {
 		sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, CMD_CTRL_BREAK);
@@ -288,7 +257,7 @@ static int sh_mmcif_error_manage(struct sh_mmcif_host *host)
 					"command sequence timeout err\n");
 				return -EIO;
 			}
-			if (!(sh_mmcif_readl(host, MMCIF_CE_HOST_STS1)
+			if (!(sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1)
 								& STS1_CMDSEQ))
 				break;
 			mdelay(1);
@@ -330,9 +299,9 @@ static int sh_mmcif_single_read(struct sh_mmcif_host *host,
 
 	host->wait_int = 0;
 	blocksize = (BLOCK_SIZE_MASK &
-			sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET)) + 3;
+			sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3;
 	for (i = 0; i < blocksize / 4; i++)
-		*p++ = sh_mmcif_readl(host, MMCIF_CE_DATA);
+		*p++ = sh_mmcif_readl(host->addr, MMCIF_CE_DATA);
 
 	/* buffer read end */
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFRE);
@@ -353,7 +322,8 @@ static int sh_mmcif_multi_read(struct sh_mmcif_host *host,
 	long time;
 	u32 blocksize, i, j, sec, *p;
 
-	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET);
+	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host->addr,
+						     MMCIF_CE_BLOCK_SET);
 	for (j = 0; j < data->sg_len; j++) {
 		p = sg_virt(data->sg);
 		host->wait_int = 0;
@@ -370,7 +340,8 @@ static int sh_mmcif_multi_read(struct sh_mmcif_host *host,
 
 			host->wait_int = 0;
 			for (i = 0; i < blocksize / 4; i++)
-				*p++ = sh_mmcif_readl(host, MMCIF_CE_DATA);
+				*p++ = sh_mmcif_readl(host->addr,
+						      MMCIF_CE_DATA);
 		}
 		if (j < data->sg_len - 1)
 			data->sg++;
@@ -397,9 +368,9 @@ static int sh_mmcif_single_write(struct sh_mmcif_host *host,
 
 	host->wait_int = 0;
 	blocksize = (BLOCK_SIZE_MASK &
-			sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET)) + 3;
+			sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3;
 	for (i = 0; i < blocksize / 4; i++)
-		sh_mmcif_writel(host, MMCIF_CE_DATA, *p++);
+		sh_mmcif_writel(host->addr, MMCIF_CE_DATA, *p++);
 
 	/* buffer write end */
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MDTRANE);
@@ -421,7 +392,8 @@ static int sh_mmcif_multi_write(struct sh_mmcif_host *host,
 	long time;
 	u32 i, sec, j, blocksize, *p;
 
-	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET);
+	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host->addr,
+						     MMCIF_CE_BLOCK_SET);
 
 	for (j = 0; j < data->sg_len; j++) {
 		p = sg_virt(data->sg);
@@ -439,7 +411,8 @@ static int sh_mmcif_multi_write(struct sh_mmcif_host *host,
 
 			host->wait_int = 0;
 			for (i = 0; i < blocksize / 4; i++)
-				sh_mmcif_writel(host, MMCIF_CE_DATA, *p++);
+				sh_mmcif_writel(host->addr,
+						MMCIF_CE_DATA, *p++);
 		}
 		if (j < data->sg_len - 1)
 			data->sg++;
@@ -451,18 +424,18 @@ static void sh_mmcif_get_response(struct sh_mmcif_host *host,
 						struct mmc_command *cmd)
 {
 	if (cmd->flags & MMC_RSP_136) {
-		cmd->resp[0] = sh_mmcif_readl(host, MMCIF_CE_RESP3);
-		cmd->resp[1] = sh_mmcif_readl(host, MMCIF_CE_RESP2);
-		cmd->resp[2] = sh_mmcif_readl(host, MMCIF_CE_RESP1);
-		cmd->resp[3] = sh_mmcif_readl(host, MMCIF_CE_RESP0);
+		cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP3);
+		cmd->resp[1] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP2);
+		cmd->resp[2] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP1);
+		cmd->resp[3] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP0);
 	} else
-		cmd->resp[0] = sh_mmcif_readl(host, MMCIF_CE_RESP0);
+		cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP0);
 }
 
 static void sh_mmcif_get_cmd12response(struct sh_mmcif_host *host,
 						struct mmc_command *cmd)
 {
-	cmd->resp[0] = sh_mmcif_readl(host, MMCIF_CE_RESP_CMD12);
+	cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP_CMD12);
 }
 
 static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
@@ -596,18 +569,19 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host *host,
 		MASK_MRDATTO | MASK_MRBSYTO | MASK_MRSPTO;
 
 	if (host->data) {
-		sh_mmcif_writel(host, MMCIF_CE_BLOCK_SET, 0);
-		sh_mmcif_writel(host, MMCIF_CE_BLOCK_SET, mrq->data->blksz);
+		sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET, 0);
+		sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET,
+				mrq->data->blksz);
 	}
 	opc = sh_mmcif_set_cmd(host, mrq, cmd, opc);
 
-	sh_mmcif_writel(host, MMCIF_CE_INT, 0xD80430C0);
-	sh_mmcif_writel(host, MMCIF_CE_INT_MASK, mask);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT, 0xD80430C0);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, mask);
 	/* set arg */
-	sh_mmcif_writel(host, MMCIF_CE_ARG, cmd->arg);
+	sh_mmcif_writel(host->addr, MMCIF_CE_ARG, cmd->arg);
 	host->wait_int = 0;
 	/* set cmd */
-	sh_mmcif_writel(host, MMCIF_CE_CMD_SET, opc);
+	sh_mmcif_writel(host->addr, MMCIF_CE_CMD_SET, opc);
 
 	time = wait_event_interruptible_timeout(host->intr_wait,
 		host->wait_int == 1 || host->sd_error == 1, host->timeout);
@@ -752,43 +726,44 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id)
 	u32 state = 0;
 	int err = 0;
 
-	state = sh_mmcif_readl(host, MMCIF_CE_INT);
+	state = sh_mmcif_readl(host->addr, MMCIF_CE_INT);
 
 	if (state & INT_RBSYE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~(INT_RBSYE | INT_CRSPE));
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
+				~(INT_RBSYE | INT_CRSPE));
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MRBSYE);
 	} else if (state & INT_CRSPE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_CRSPE);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_CRSPE);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCRSPE);
 	} else if (state & INT_BUFREN) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_BUFREN);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFREN);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
 	} else if (state & INT_BUFWEN) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_BUFWEN);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFWEN);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
 	} else if (state & INT_CMD12DRE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT,
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
 			~(INT_CMD12DRE | INT_CMD12RBE |
 			  INT_CMD12CRE | INT_BUFRE));
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12DRE);
 	} else if (state & INT_BUFRE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_BUFRE);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFRE);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFRE);
 	} else if (state & INT_DTRANE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_DTRANE);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_DTRANE);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MDTRANE);
 	} else if (state & INT_CMD12RBE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT,
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
 				~(INT_CMD12RBE | INT_CMD12CRE));
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12RBE);
 	} else if (state & INT_ERR_STS) {
 		/* err interrupts */
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~state);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
 		err = 1;
 	} else {
 		pr_debug("%s: Not support int\n", DRIVER_NAME);
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~state);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
 		err = 1;
 	}
@@ -894,12 +869,12 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev)
 		goto clean_up2;
 	}
 
-	sh_mmcif_writel(host, MMCIF_CE_INT_MASK, MASK_ALL);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 	sh_mmcif_detect(host->mmc);
 
 	pr_info("%s: driver version %s\n", DRIVER_NAME, DRIVER_VERSION);
 	pr_debug("%s: chip ver H'%04x\n", DRIVER_NAME,
-			sh_mmcif_readl(host, MMCIF_CE_VERSION) & 0x0000ffff);
+		sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
 	return ret;
 
 clean_up2:
@@ -917,7 +892,7 @@ static int __devexit sh_mmcif_remove(struct platform_device *pdev)
 	struct sh_mmcif_host *host = platform_get_drvdata(pdev);
 	int irq[2];
 
-	sh_mmcif_writel(host, MMCIF_CE_INT_MASK, MASK_ALL);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 
 	irq[0] = platform_get_irq(pdev, 0);
 	irq[1] = platform_get_irq(pdev, 1);
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
index aafe832f18a..e079c6beeb9 100644
--- a/include/linux/mmc/sh_mmcif.h
+++ b/include/linux/mmc/sh_mmcif.h
@@ -14,6 +14,9 @@
 #ifndef __SH_MMCIF_H__
 #define __SH_MMCIF_H__
 
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
 /*
  * MMCIF : CE_CLK_CTRL [19:16]
  * 1000 : Peripheral clock / 512
@@ -36,4 +39,33 @@ struct sh_mmcif_plat_data {
 	u32	ocr;
 };
 
+#define MMCIF_CE_CMD_SET	0x00000000
+#define MMCIF_CE_ARG		0x00000008
+#define MMCIF_CE_ARG_CMD12	0x0000000C
+#define MMCIF_CE_CMD_CTRL	0x00000010
+#define MMCIF_CE_BLOCK_SET	0x00000014
+#define MMCIF_CE_CLK_CTRL	0x00000018
+#define MMCIF_CE_BUF_ACC	0x0000001C
+#define MMCIF_CE_RESP3		0x00000020
+#define MMCIF_CE_RESP2		0x00000024
+#define MMCIF_CE_RESP1		0x00000028
+#define MMCIF_CE_RESP0		0x0000002C
+#define MMCIF_CE_RESP_CMD12	0x00000030
+#define MMCIF_CE_DATA		0x00000034
+#define MMCIF_CE_INT		0x00000040
+#define MMCIF_CE_INT_MASK	0x00000044
+#define MMCIF_CE_HOST_STS1	0x00000048
+#define MMCIF_CE_HOST_STS2	0x0000004C
+#define MMCIF_CE_VERSION	0x0000007C
+
+extern inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
+{
+	return readl(addr + reg);
+}
+
+extern inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
+{
+	writel(val, addr + reg);
+}
+
 #endif /* __SH_MMCIF_H__ */
-- 
cgit v1.2.3-70-g09d2


From 8a768952ca8cb5cad98cfa343e6fb131e3bbdc3e Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 18 May 2010 14:43:04 +0000
Subject: sh: add boot code to MMCIF driver header

This patch adds a set of MMCIF functions for the romImage
boot loader that allows the kernel to be booted directly
from an MMC card.

Thanks to Jeremy Baker for the initial prototype.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 include/linux/mmc/sh_mmcif.h | 129 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 129 insertions(+)

diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
index e079c6beeb9..d4a2ebbdab4 100644
--- a/include/linux/mmc/sh_mmcif.h
+++ b/include/linux/mmc/sh_mmcif.h
@@ -68,4 +68,133 @@ extern inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
 	writel(val, addr + reg);
 }
 
+#define SH_MMCIF_BBS 512 /* boot block size */
+
+extern inline void sh_mmcif_boot_cmd_send(void __iomem *base,
+					  unsigned long cmd, unsigned long arg)
+{
+	sh_mmcif_writel(base, MMCIF_CE_INT, 0);
+	sh_mmcif_writel(base, MMCIF_CE_ARG, arg);
+	sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd);
+}
+
+extern inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
+{
+	unsigned long tmp;
+	int cnt;
+
+	for (cnt = 0; cnt < 1000000; cnt++) {
+		tmp = sh_mmcif_readl(base, MMCIF_CE_INT);
+		if (tmp & mask) {
+			sh_mmcif_writel(base, MMCIF_CE_INT, tmp & ~mask);
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+extern inline int sh_mmcif_boot_cmd(void __iomem *base,
+				    unsigned long cmd, unsigned long arg)
+{
+	sh_mmcif_boot_cmd_send(base, cmd, arg);
+	return sh_mmcif_boot_cmd_poll(base, 0x00010000);
+}
+
+extern inline int sh_mmcif_boot_do_read_single(void __iomem *base,
+					       unsigned int block_nr,
+					       unsigned long *buf)
+{
+	int k;
+
+	/* CMD13 - Status */
+	sh_mmcif_boot_cmd(base, 0x0d400000, 0x00010000);
+
+	if (sh_mmcif_readl(base, MMCIF_CE_RESP0) != 0x0900)
+		return -1;
+
+	/* CMD17 - Read */
+	sh_mmcif_boot_cmd(base, 0x11480000, block_nr * SH_MMCIF_BBS);
+	if (sh_mmcif_boot_cmd_poll(base, 0x00100000) < 0)
+		return -1;
+
+	for (k = 0; k < (SH_MMCIF_BBS / 4); k++)
+		buf[k] = sh_mmcif_readl(base, MMCIF_CE_DATA);
+
+	return 0;
+}
+
+extern inline int sh_mmcif_boot_do_read(void __iomem *base,
+					unsigned long first_block,
+					unsigned long nr_blocks,
+					void *buf)
+{
+	unsigned long k;
+	int ret = 0;
+
+	/* CMD16 - Set the block size */
+	sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS);
+
+	for (k = 0; !ret && k < nr_blocks; k++)
+		ret = sh_mmcif_boot_do_read_single(base, first_block + k,
+						   buf + (k * SH_MMCIF_BBS));
+
+	return ret;
+}
+
+extern inline void sh_mmcif_boot_init(void __iomem *base)
+{
+	unsigned long tmp;
+
+	/* reset */
+	tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | 0x80000000);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & ~0x80000000);
+
+	/* byte swap */
+	sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, 0x00010000);
+
+	/* Set block size in MMCIF hardware */
+	sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
+
+	/* Enable the clock, set it to Bus clock/256 (about 325Khz)*/
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01072fff);
+
+	/* CMD0 */
+	sh_mmcif_boot_cmd(base, 0x00000040, 0);
+
+	/* CMD1 - Get OCR */
+	do {
+		sh_mmcif_boot_cmd(base, 0x01405040, 0x40300000); /* CMD1 */
+	} while ((sh_mmcif_readl(base, MMCIF_CE_RESP0) & 0x80000000)
+		 != 0x80000000);
+
+	/* CMD2 - Get CID */
+	sh_mmcif_boot_cmd(base, 0x02806040, 0);
+
+	/* CMD3 - Set card relative address */
+	sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000);
+}
+
+extern inline void sh_mmcif_boot_slurp(void __iomem *base,
+				       unsigned char *buf,
+				       unsigned long no_bytes)
+{
+	unsigned long tmp;
+
+	/* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01012fff);
+
+	/* CMD9 - Get CSD */
+	sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000);
+
+	/* CMD7 - Select the card */
+	sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000);
+
+	tmp = no_bytes / SH_MMCIF_BBS;
+	tmp += (no_bytes % SH_MMCIF_BBS) ? 1 : 0;
+
+	sh_mmcif_boot_do_read(base, 512, tmp, buf);
+}
+
 #endif /* __SH_MMCIF_H__ */
-- 
cgit v1.2.3-70-g09d2


From 4705b2e8047221142af2ed5e37f54ac4c7f80a7d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 18 May 2010 14:43:15 +0000
Subject: sh: add romImage MMCIF boot for sh7724 and Ecovec V2

This patch is V2 of the MMCIF romImage boot support
for sh7724 and the Ecovec board. With this patch
applied and CONFIG_ROMIMAGE_MMCIF selected the
romImage kernel image can be written to a MMC card
and booted directly by the sh7724 cpu.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                               | 11 ++++
 arch/sh/boot/romimage/Makefile                | 13 +++--
 arch/sh/boot/romimage/head.S                  | 30 +++++++++++
 arch/sh/boot/romimage/mmcif-sh7724.c          | 72 +++++++++++++++++++++++++++
 arch/sh/boot/romimage/vmlinux.scr             |  1 +
 arch/sh/include/cpu-sh4/cpu/sh7724.h          |  1 +
 arch/sh/include/mach-common/mach/romimage.h   | 10 ++++
 arch/sh/include/mach-ecovec24/mach/romimage.h | 27 ++++++++++
 arch/sh/include/mach-kfr2r09/mach/romimage.h  | 10 ++++
 9 files changed, 171 insertions(+), 4 deletions(-)
 create mode 100644 arch/sh/boot/romimage/mmcif-sh7724.c

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index c5ee4ce60b5..22d25113d76 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -776,6 +776,17 @@ config ENTRY_OFFSET
 	default "0x00010000" if PAGE_SIZE_64KB
 	default "0x00000000"
 
+config ROMIMAGE_MMCIF
+	bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
+	depends on CPU_SUBTYPE_SH7724 && EXPERIMENTAL
+	help
+	  Say Y here to include experimental MMCIF loading code in
+	  romImage. With this enabled it is possible to write the romImage
+	  kernel image to an MMC card and boot the kernel straight from
+	  the reset vector. At reset the processor Mask ROM will load the
+	  first part of the romImage which in turn loads the rest the kernel
+	  image to RAM using the MMCIF hardware block.
+
 choice
 	prompt "Kernel command line"
 	optional
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
index f473a24a2d9..2216ee57f25 100644
--- a/arch/sh/boot/romimage/Makefile
+++ b/arch/sh/boot/romimage/Makefile
@@ -1,16 +1,21 @@
 #
 # linux/arch/sh/boot/romimage/Makefile
 #
-# create an image suitable for burning to flash from zImage
+# create an romImage file suitable for burning to flash/mmc from zImage
 #
 
 targets		:= vmlinux head.o zeropage.bin piggy.o
+load-y		:= 0
 
-OBJECTS = $(obj)/head.o
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart \
+mmcif-load-$(CONFIG_CPU_SUBTYPE_SH7724)	:= 0xe5200000 # ILRAM
+mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724)	:= $(obj)/mmcif-sh7724.o
+load-$(CONFIG_ROMIMAGE_MMCIF)		:= $(mmcif-load-y)
+obj-$(CONFIG_ROMIMAGE_MMCIF)		:= $(mmcif-obj-y)
+
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \
 		   -T $(obj)/../../kernel/vmlinux.lds
 
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE
 	$(call if_changed,ld)
 	@:
 
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
index 65b8256d81c..4671d1b8215 100644
--- a/arch/sh/boot/romimage/head.S
+++ b/arch/sh/boot/romimage/head.S
@@ -12,6 +12,36 @@ romstart:
 	/* include board specific setup code */
 #include <mach/romimage.h>
 
+#ifdef CONFIG_ROMIMAGE_MMCIF
+	/* load the romImage to above the empty zero page */
+	mov.l	empty_zero_page_dst, r4
+	mov.l	empty_zero_page_dst_adj, r5
+	add	r5, r4
+	mov.l	bytes_to_load, r5
+	mov.l	loader_function, r7
+	jsr	@r7
+	 mov	r4, r15
+
+	mov.l	empty_zero_page_dst, r4
+	mov.l	empty_zero_page_dst_adj, r5
+	add	r5, r4
+	mov.l	loaded_code_offs, r5
+	add	r5, r4
+	jmp	@r4
+	 nop
+
+	.balign 4
+empty_zero_page_dst_adj:
+	.long	PAGE_SIZE
+bytes_to_load:
+	.long	end_data - romstart
+loader_function:
+	.long	mmcif_loader
+loaded_code_offs:
+	.long	loaded_code - romstart
+loaded_code:
+#endif /* CONFIG_ROMIMAGE_MMCIF */
+
 	/* copy the empty_zero_page contents to where vmlinux expects it */
 	mova	extra_data_pos, r0
 	mov.l	extra_data_size, r1
diff --git a/arch/sh/boot/romimage/mmcif-sh7724.c b/arch/sh/boot/romimage/mmcif-sh7724.c
new file mode 100644
index 00000000000..14863d7292c
--- /dev/null
+++ b/arch/sh/boot/romimage/mmcif-sh7724.c
@@ -0,0 +1,72 @@
+/*
+ * sh7724 MMCIF loader
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mmc/sh_mmcif.h>
+#include <mach/romimage.h>
+
+#define MMCIF_BASE      (void __iomem *)0xa4ca0000
+
+#define MSTPCR2		0xa4150038
+#define PTWCR		0xa4050146
+#define PTXCR		0xa4050148
+#define PSELA		0xa405014e
+#define PSELE		0xa4050156
+#define HIZCRC		0xa405015c
+#define DRVCRA		0xa405018a
+
+enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT,
+       MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE };
+
+/* SH7724 specific MMCIF loader
+ *
+ * loads the romImage from an MMC card starting from block 512
+ * use the following line to write the romImage to an MMC card
+ * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512
+ */
+asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
+{
+	mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+
+	/* enable clock to the MMCIF hardware block */
+	__raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
+
+	/* setup pins D7-D0 */
+	__raw_writew(0x0000, PTWCR);
+
+	/* setup pins MMC_CLK, MMC_CMD */
+	__raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR);
+
+	/* select D3-D0 pin function */
+	__raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA);
+
+	/* select D7-D4 pin function */
+	__raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE);
+
+	/* disable Hi-Z for the MMC pins */
+	__raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC);
+
+	/* high drive capability for MMC pins */
+	__raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
+
+	mmcif_update_progress(MMCIF_PROGRESS_INIT);
+
+	/* setup MMCIF hardware */
+	sh_mmcif_boot_init(MMCIF_BASE);
+
+	mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+
+	/* load kernel via MMCIF interface */
+	sh_mmcif_boot_slurp(MMCIF_BASE, buf, no_bytes);
+
+	/* disable clock to the MMCIF hardware block */
+	__raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
+
+	mmcif_update_progress(MMCIF_PROGRESS_DONE);
+}
diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr
index ea27298a99a..590394e2f5f 100644
--- a/arch/sh/boot/romimage/vmlinux.scr
+++ b/arch/sh/boot/romimage/vmlinux.scr
@@ -3,5 +3,6 @@ SECTIONS
   .text : {
 	zero_page_pos = .;
 	*(.data)
+	end_data = .;
 	}
 }
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index fbbf550cc52..4c27b68789b 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -9,6 +9,7 @@
  * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
  * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
  * MD8: Test Mode
+ * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0)
  */
 
 /* Pin Function Controller:
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
index 267e24112d8..08fb42269ec 100644
--- a/arch/sh/include/mach-common/mach/romimage.h
+++ b/arch/sh/include/mach-common/mach/romimage.h
@@ -1 +1,11 @@
+#ifdef __ASSEMBLY__
+
 /* do nothing here by default */
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
index 1c8787ecb1c..1dcf5e6c8d8 100644
--- a/arch/sh/include/mach-ecovec24/mach/romimage.h
+++ b/arch/sh/include/mach-ecovec24/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
 /* EcoVec board specific boot code:
  * converts the "partner-jet-script.txt" script into assembly
  * the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,28 @@
 	.align 2
 1 :	.long 0xa8000000
 2 :
+
+#else /* __ASSEMBLY__ */
+
+/* Ecovec board specific information:
+ *
+ * Set the following to enable MMCIF boot from the MMC card in CN12:
+ *
+ * DS1.5 = OFF (SH BOOT pin set to L)
+ * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
+ * DS2.7 = ON  (Select MMCIF on CN12 instead of SDHI1)
+ *
+ */
+#define HIZCRA		0xa4050158
+#define PGDR		0xa405012c
+
+extern inline void mmcif_update_progress(int nr)
+{
+	/* disable Hi-Z for LED pins */
+	__raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
+
+	/* update progress on LED4, LED5, LED6 and LED7 */
+	__raw_writeb(1 << (nr - 1), PGDR);
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
index a110823f2bd..976256a323f 100644
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
 /* kfr2r09 board specific boot code:
  * converts the "partner-jet-script.txt" script into assembly
  * the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,11 @@
 	.align 2
 1:	.long 0xa8000000
 2:
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
-- 
cgit v1.2.3-70-g09d2


From abb24f4846d1537d73605e8576de8359a98e5ced Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 2 Jun 2010 16:26:13 +0900
Subject: usb: gadget: m66592-udc pio to mmio accessor conversion.

m66592-udc is erroneously using PIO routines on MMIO registers, which
presently blows up for any platform that elects to either override or do
away with PIO routines. This managed to work for the common cases since
the PIO routines were simply wrapped to their MMIO counterparts. This
switches over to using the MMIO routines directly, and enables us to kill
off a lot of superfluous casting in the process.

Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/usb/gadget/m66592-udc.h | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 8b960deed68..c3caf1ac73c 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -537,35 +537,35 @@ struct m66592 {
 /*-------------------------------------------------------------------------*/
 static inline u16 m66592_read(struct m66592 *m66592, unsigned long offset)
 {
-	return inw((unsigned long)m66592->reg + offset);
+	return ioread16(m66592->reg + offset);
 }
 
 static inline void m66592_read_fifo(struct m66592 *m66592,
 		unsigned long offset,
 		void *buf, unsigned long len)
 {
-	unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
+	void __iomem *fifoaddr = m66592->reg + offset;
 
 	if (m66592->pdata->on_chip) {
 		len = (len + 3) / 4;
-		insl(fifoaddr, buf, len);
+		ioread32_rep(fifoaddr, buf, len);
 	} else {
 		len = (len + 1) / 2;
-		insw(fifoaddr, buf, len);
+		ioread16_rep(fifoaddr, buf, len);
 	}
 }
 
 static inline void m66592_write(struct m66592 *m66592, u16 val,
 				unsigned long offset)
 {
-	outw(val, (unsigned long)m66592->reg + offset);
+	iowrite16(val, m66592->reg + offset);
 }
 
 static inline void m66592_write_fifo(struct m66592 *m66592,
 		unsigned long offset,
 		void *buf, unsigned long len)
 {
-	unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
+	void __iomem *fifoaddr = m66592->reg + offset;
 
 	if (m66592->pdata->on_chip) {
 		unsigned long count;
@@ -573,25 +573,25 @@ static inline void m66592_write_fifo(struct m66592 *m66592,
 		int i;
 
 		count = len / 4;
-		outsl(fifoaddr, buf, count);
+		iowrite32_rep(fifoaddr, buf, count);
 
 		if (len & 0x00000003) {
 			pb = buf + count * 4;
 			for (i = 0; i < (len & 0x00000003); i++) {
 				if (m66592_read(m66592, M66592_CFBCFG))	/* le */
-					outb(pb[i], fifoaddr + (3 - i));
+					iowrite8(pb[i], fifoaddr + (3 - i));
 				else
-					outb(pb[i], fifoaddr + i);
+					iowrite8(pb[i], fifoaddr + i);
 			}
 		}
 	} else {
 		unsigned long odd = len & 0x0001;
 
 		len = len / 2;
-		outsw(fifoaddr, buf, len);
+		iowrite16_rep(fifoaddr, buf, len);
 		if (odd) {
 			unsigned char *p = buf + len*2;
-			outb(*p, fifoaddr);
+			iowrite8(*p, fifoaddr);
 		}
 	}
 }
-- 
cgit v1.2.3-70-g09d2


From e8b48669de54d390644c77cd26d5c9fccbc1e0a1 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 2 Jun 2010 16:27:12 +0900
Subject: usb: gadget: r8a66597-udc pio to mmio accessor conversion.

r8a66597-udc is erroneously using PIO routines on MMIO registers, which
presently blows up for any platform that elects to either override or do
away with PIO routines. This managed to work for the common cases since
the PIO routines were simply wrapped to their MMIO counterparts. This
switches over to using the MMIO routines directly, and enables us to kill
off a lot of superfluous casting in the process.

Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/usb/gadget/r8a66597-udc.c |  4 ++--
 drivers/usb/gadget/r8a66597-udc.h | 24 ++++++++++++------------
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 888d8f166c0..70a81784275 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1500,7 +1500,7 @@ static int __exit r8a66597_remove(struct platform_device *pdev)
 	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
 
 	del_timer_sync(&r8a66597->timer);
-	iounmap((void *)r8a66597->reg);
+	iounmap(r8a66597->reg);
 	free_irq(platform_get_irq(pdev, 0), r8a66597);
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
 #ifdef CONFIG_HAVE_CLK
@@ -1578,7 +1578,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	init_timer(&r8a66597->timer);
 	r8a66597->timer.function = r8a66597_timer;
 	r8a66597->timer.data = (unsigned long)r8a66597;
-	r8a66597->reg = (unsigned long)reg;
+	r8a66597->reg = reg;
 
 #ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip) {
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 9a537aa0796..f763b5190af 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -91,7 +91,7 @@ struct r8a66597_ep {
 
 struct r8a66597 {
 	spinlock_t		lock;
-	unsigned long		reg;
+	void __iomem		*reg;
 
 #ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
@@ -127,7 +127,7 @@ struct r8a66597 {
 
 static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
 {
-	return inw(r8a66597->reg + offset);
+	return ioread16(r8a66597->reg + offset);
 }
 
 static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
@@ -135,7 +135,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 				      unsigned char *buf,
 				      int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	unsigned int data;
 	int i;
 
@@ -144,7 +144,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 
 		/* aligned buf case */
 		if (len >= 4 && !((unsigned long)buf & 0x03)) {
-			insl(fifoaddr, buf, len / 4);
+			ioread32_rep(fifoaddr, buf, len / 4);
 			buf += len & ~0x03;
 			len &= 0x03;
 		}
@@ -152,7 +152,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 		/* unaligned buf case */
 		for (i = 0; i < len; i++) {
 			if (!(i & 0x03))
-				data = inl(fifoaddr);
+				data = ioread32(fifoaddr);
 
 			buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
 		}
@@ -161,7 +161,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 
 		/* aligned buf case */
 		if (len >= 2 && !((unsigned long)buf & 0x01)) {
-			insw(fifoaddr, buf, len / 2);
+			ioread16_rep(fifoaddr, buf, len / 2);
 			buf += len & ~0x01;
 			len &= 0x01;
 		}
@@ -169,7 +169,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 		/* unaligned buf case */
 		for (i = 0; i < len; i++) {
 			if (!(i & 0x01))
-				data = inw(fifoaddr);
+				data = ioread16(fifoaddr);
 
 			buf[i] = (data >> ((i & 0x01) * 8)) & 0xff;
 		}
@@ -179,7 +179,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
 				  unsigned long offset)
 {
-	outw(val, r8a66597->reg + offset);
+	iowrite16(val, r8a66597->reg + offset);
 }
 
 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
@@ -187,21 +187,21 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 				       unsigned char *buf,
 				       int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	int adj = 0;
 	int i;
 
 	if (r8a66597->pdata->on_chip) {
 		/* 32-bit access only if buf is 32-bit aligned */
 		if (len >= 4 && !((unsigned long)buf & 0x03)) {
-			outsl(fifoaddr, buf, len / 4);
+			iowrite32_rep(fifoaddr, buf, len / 4);
 			buf += len & ~0x03;
 			len &= 0x03;
 		}
 	} else {
 		/* 16-bit access only if buf is 16-bit aligned */
 		if (len >= 2 && !((unsigned long)buf & 0x01)) {
-			outsw(fifoaddr, buf, len / 2);
+			iowrite16_rep(fifoaddr, buf, len / 2);
 			buf += len & ~0x01;
 			len &= 0x01;
 		}
@@ -216,7 +216,7 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 	}
 
 	for (i = 0; i < len; i++)
-		outb(buf[i], fifoaddr + adj - (i & adj));
+		iowrite8(buf[i], fifoaddr + adj - (i & adj));
 }
 
 static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
-- 
cgit v1.2.3-70-g09d2


From 1c98347e613bf17ea2f18c9766ce0ab77f65a96d Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 2 Jun 2010 16:27:54 +0900
Subject: usb: r8a66597-hcd pio to mmio accessor conversion.

r8a66597-hcd is erroneously using PIO routines on MMIO registers, which
presently blows up for any platform that elects to either override or do
away with PIO routines. This managed to work for the common cases since
the PIO routines were simply wrapped to their MMIO counterparts. This
switches over to using the MMIO routines directly, and enables us to kill
off a lot of superfluous casting in the process.

Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/usb/host/r8a66597-hcd.c |  4 ++--
 drivers/usb/host/r8a66597.h     | 26 +++++++++++++-------------
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 6db57ab6079..1a2bb4ce638 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2404,7 +2404,7 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
 
 	del_timer_sync(&r8a66597->rh_timer);
 	usb_remove_hcd(hcd);
-	iounmap((void *)r8a66597->reg);
+	iounmap(r8a66597->reg);
 #ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip)
 		clk_put(r8a66597->clk);
@@ -2496,7 +2496,7 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	init_timer(&r8a66597->rh_timer);
 	r8a66597->rh_timer.function = r8a66597_timer;
 	r8a66597->rh_timer.data = (unsigned long)r8a66597;
-	r8a66597->reg = (unsigned long)reg;
+	r8a66597->reg = reg;
 
 	/* make sure no interrupts are pending */
 	ret = r8a66597_clock_enable(r8a66597);
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 228e3fb2385..95d0f5adfdc 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -112,7 +112,7 @@ struct r8a66597_root_hub {
 
 struct r8a66597 {
 	spinlock_t lock;
-	unsigned long reg;
+	void __iomem *reg;
 #ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
 #endif
@@ -170,67 +170,67 @@ static inline struct urb *r8a66597_get_urb(struct r8a66597 *r8a66597,
 
 static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
 {
-	return inw(r8a66597->reg + offset);
+	return ioread16(r8a66597->reg + offset);
 }
 
 static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 				      unsigned long offset, u16 *buf,
 				      int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	unsigned long count;
 
 	if (r8a66597->pdata->on_chip) {
 		count = len / 4;
-		insl(fifoaddr, buf, count);
+		ioread32_rep(fifoaddr, buf, count);
 
 		if (len & 0x00000003) {
-			unsigned long tmp = inl(fifoaddr);
+			unsigned long tmp = ioread32(fifoaddr);
 			memcpy((unsigned char *)buf + count * 4, &tmp,
 			       len & 0x03);
 		}
 	} else {
 		len = (len + 1) / 2;
-		insw(fifoaddr, buf, len);
+		ioread16_rep(fifoaddr, buf, len);
 	}
 }
 
 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
 				  unsigned long offset)
 {
-	outw(val, r8a66597->reg + offset);
+	iowrite16(val, r8a66597->reg + offset);
 }
 
 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 				       unsigned long offset, u16 *buf,
 				       int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	unsigned long count;
 	unsigned char *pb;
 	int i;
 
 	if (r8a66597->pdata->on_chip) {
 		count = len / 4;
-		outsl(fifoaddr, buf, count);
+		iowrite32_rep(fifoaddr, buf, count);
 
 		if (len & 0x00000003) {
 			pb = (unsigned char *)buf + count * 4;
 			for (i = 0; i < (len & 0x00000003); i++) {
 				if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
-					outb(pb[i], fifoaddr + i);
+					iowrite8(pb[i], fifoaddr + i);
 				else
-					outb(pb[i], fifoaddr + 3 - i);
+					iowrite8(pb[i], fifoaddr + 3 - i);
 			}
 		}
 	} else {
 		int odd = len & 0x0001;
 
 		len = len / 2;
-		outsw(fifoaddr, buf, len);
+		ioread16_rep(fifoaddr, buf, len);
 		if (unlikely(odd)) {
 			buf = &buf[len];
-			outb((unsigned char)*buf, fifoaddr);
+			iowrite8((unsigned char)*buf, fifoaddr);
 		}
 	}
 }
-- 
cgit v1.2.3-70-g09d2


From 86e4dd5add77ab809f5427391dfabb8f78cbcb58 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 25 May 2010 20:06:13 +0900
Subject: sh: support for platforms without PIO.

This extends some of the existing special casing for HAS_IOPORT
platforms and gets it to the point where platforms can begin to
conditionally select it.

The major changes here are that the PIO routines themselves go away
completely, including all of the machvec port mapping wrappers. With this
in place it's possible for any non-machvec abusing platform to disable
PIO completely. At present this is left as an opt-in until the abusers
are the odd ones out instead of the majority.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig               |  5 ++++-
 arch/sh/include/asm/io.h      |  8 ++++++++
 arch/sh/include/asm/machvec.h |  9 +++++----
 arch/sh/kernel/Makefile       |  3 ++-
 arch/sh/kernel/io.c           | 22 ----------------------
 arch/sh/kernel/io_generic.c   | 20 ++++++++++++++++++++
 arch/sh/kernel/io_trapped.c   |  4 ++++
 arch/sh/kernel/machvec.c      | 17 +++++++++++------
 8 files changed, 54 insertions(+), 34 deletions(-)

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0e318c905ee..1eef24d04bb 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -9,7 +9,7 @@ config SUPERH
 	def_bool y
 	select EMBEDDED
 	select HAVE_CLK
-	select HAVE_IDE
+	select HAVE_IDE if HAS_IOPORT
 	select HAVE_LMB
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
@@ -174,6 +174,9 @@ config ARCH_HAS_DEFAULT_IDLE
 config ARCH_HAS_CPU_IDLE_WAIT
 	def_bool y
 
+config NO_IOPORT
+	bool
+
 config IO_TRAPPED
 	bool
 
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index f689554e17c..b237d525d59 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -39,6 +39,8 @@
 #include <asm/io_generic.h>
 #include <asm/io_trapped.h>
 
+#ifdef CONFIG_HAS_IOPORT
+
 #define inb(p)			sh_mv.mv_inb((p))
 #define inw(p)			sh_mv.mv_inw((p))
 #define inl(p)			sh_mv.mv_inl((p))
@@ -60,6 +62,8 @@
 #define outsw(p,b,c)		sh_mv.mv_outsw((p), (b), (c))
 #define outsl(p,b,c)		sh_mv.mv_outsl((p), (b), (c))
 
+#endif
+
 #define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile u8  __force *)(a) = (v))
 #define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
 #define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
@@ -240,6 +244,8 @@ __BUILD_MEMORY_STRING(q, u64)
 
 #define IO_SPACE_LIMIT 0xffffffff
 
+#ifdef CONFIG_HAS_IOPORT
+
 /*
  * This function provides a method for the generic case where a
  * board-specific ioport_map simply needs to return the port + some
@@ -255,6 +261,8 @@ static inline void __set_io_port_base(unsigned long pbase)
 
 #define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
 
+#endif
+
 /* We really want to try and get these to memcpy etc */
 void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
 void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index bc0218cb72e..a0b0cf79cf8 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -19,6 +19,10 @@ struct sh_machine_vector {
 	const char *mv_name;
 	int mv_nr_irqs;
 
+	int (*mv_irq_demux)(int irq);
+	void (*mv_init_irq)(void);
+
+#ifdef CONFIG_HAS_IOPORT
 	u8 (*mv_inb)(unsigned long);
 	u16 (*mv_inw)(unsigned long);
 	u32 (*mv_inl)(unsigned long);
@@ -40,12 +44,9 @@ struct sh_machine_vector {
 	void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
 	void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
 
-	int (*mv_irq_demux)(int irq);
-
-	void (*mv_init_irq)(void);
-
 	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
 	void (*mv_ioport_unmap)(void __iomem *);
+#endif
 
 	int (*mv_clk_init)(void);
 	int (*mv_mode_pins)(void);
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 650b92f00ee..e25f3c69525 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -12,7 +12,7 @@ endif
 CFLAGS_REMOVE_return_address.o = -pg
 
 obj-y	:= clkdev.o debugtraps.o dma-nommu.o dumpstack.o 		\
-	   idle.o io.o io_generic.o irq.o				\
+	   idle.o io.o irq.o						\
 	   irq_$(BITS).o machvec.o nmi_debug.o process.o		\
 	   process_$(BITS).o ptrace_$(BITS).o				\
 	   reboot.o return_address.o					\
@@ -39,6 +39,7 @@ obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
 obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_callchain.o
+obj-$(CONFIG_HAS_IOPORT)	+= io_generic.o
 
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)		+= hw_breakpoint.o
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 4770c241c67..5c51b794ba2 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -112,25 +112,3 @@ void memset_io(volatile void __iomem *dst, int c, unsigned long count)
         }
 }
 EXPORT_SYMBOL(memset_io);
-
-#ifndef CONFIG_GENERIC_IOMAP
-
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	void __iomem *ret;
-
-	ret = __ioport_map_trapped(port, nr);
-	if (ret)
-		return ret;
-
-	return __ioport_map(port, nr);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
-	sh_mv.mv_ioport_unmap(addr);
-}
-EXPORT_SYMBOL(ioport_unmap);
-
-#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index e1e1dbd1955..447d78f666f 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -158,3 +158,23 @@ void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
 void generic_ioport_unmap(void __iomem *addr)
 {
 }
+
+#ifndef CONFIG_GENERIC_IOMAP
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	void __iomem *ret;
+
+	ret = __ioport_map_trapped(port, nr);
+	if (ret)
+		return ret;
+
+	return __ioport_map(port, nr);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+	sh_mv.mv_ioport_unmap(addr);
+}
+EXPORT_SYMBOL(ioport_unmap);
+#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index 4a8bb4eeb8a..2947d2bd129 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -91,10 +91,14 @@ int register_trapped_io(struct trapped_io *tiop)
 	tiop->magic = IO_TRAPPED_MAGIC;
 	INIT_LIST_HEAD(&tiop->list);
 	spin_lock_irq(&trapped_lock);
+#ifdef CONFIG_HAS_IOPORT
 	if (flags & IORESOURCE_IO)
 		list_add(&tiop->list, &trapped_io);
+#endif
+#ifdef CONFIG_HAS_IOMEM
 	if (flags & IORESOURCE_MEM)
 		list_add(&tiop->list, &trapped_mem);
+#endif
 	spin_unlock_irq(&trapped_lock);
 
 	return 0;
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 85cfaf916fd..9f9bb63616a 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -118,6 +118,14 @@ void __init sh_mv_setup(void)
 		sh_mv.mv_##elem = generic_##elem; \
 } while (0)
 
+#ifdef CONFIG_HAS_IOPORT
+
+#ifdef P2SEG
+	__set_io_port_base(P2SEG);
+#else
+	__set_io_port_base(0);
+#endif
+
 	mv_set(inb);	mv_set(inw);	mv_set(inl);
 	mv_set(outb);	mv_set(outw);	mv_set(outl);
 
@@ -129,16 +137,13 @@ void __init sh_mv_setup(void)
 
 	mv_set(ioport_map);
 	mv_set(ioport_unmap);
+
+#endif
+
 	mv_set(irq_demux);
 	mv_set(mode_pins);
 	mv_set(mem_init);
 
 	if (!sh_mv.mv_nr_irqs)
 		sh_mv.mv_nr_irqs = NR_IRQS;
-
-#ifdef P2SEG
-	__set_io_port_base(P2SEG);
-#else
-	__set_io_port_base(0);
-#endif
 }
-- 
cgit v1.2.3-70-g09d2


From 242239715c8394da16b1dd0d6f3254f99cac10d2 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 25 May 2010 20:10:24 +0900
Subject: sh: mach-sdk7786: conditionally disable PIO support.

SDK7786 only supports PIO via the PCI I/O space, so we disable PIO
completely for the non-PCI case.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 938e87d5148..fd6ddeb7d2c 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -154,6 +154,7 @@ config SH_SDK7786
 	bool "SDK7786"
 	depends on CPU_SUBTYPE_SH7786
 	select SYS_SUPPORTS_PCI
+	select NO_IOPORT if !PCI
 	help
 	  Select SDK7786 if configuring for a Renesas Technology Europe
 	  SH7786-65nm board.
-- 
cgit v1.2.3-70-g09d2


From 861160bfd097de7dbf3195bbef210e4f787327ab Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 26 May 2010 15:58:45 +0900
Subject: sh: PIO disabling for x3proto and urquell.

urquell only provides PIO in the PCI case, while the x3proto board never
had a working PCIe controller, so it can simply disable it outright.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index fd6ddeb7d2c..07b35ca2f64 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -191,6 +191,7 @@ config SH_URQUELL
 	depends on CPU_SUBTYPE_SH7786
 	select ARCH_REQUIRE_GPIOLIB
 	select SYS_SUPPORTS_PCI
+	select NO_IOPORT if !PCI
 
 config SH_MIGOR
 	bool "Migo-R"
@@ -287,6 +288,7 @@ config SH_LBOX_RE2
 config SH_X3PROTO
 	bool "SH-X3 Prototype board"
 	depends on CPU_SUBTYPE_SHX3
+	select NO_IOPORT if !PCI
 
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"
-- 
cgit v1.2.3-70-g09d2


From 66f49121ffa41a19c59965b31b046d8368fec3c7 Mon Sep 17 00:00:00 2001
From: Aurelien Jarno <aurelien@aurel32.net>
Date: Mon, 31 May 2010 21:45:48 +0000
Subject: clocksource: sh_tmu: compute mult and shift before registration

Since commit 98962465ed9e6ea99c38e0af63fe1dcb5a79dc25 ("nohz: Prevent
clocksource wrapping during idle"), the CPU of an R2D board never goes
to idle. This commit assumes that mult and shift are assigned before
the clocksource is registered. As a consequence the safe maximum sleep
time is negative and the CPU never goes into idle.

This patch fixes the problem by moving mult and shift initialization
from sh_tmu_clocksource_enable() to sh_tmu_register_clocksource().

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Cc: stable@kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/clocksource/sh_tmu.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 8e44e14ec4c..de715901b82 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -199,16 +199,8 @@ static cycle_t sh_tmu_clocksource_read(struct clocksource *cs)
 static int sh_tmu_clocksource_enable(struct clocksource *cs)
 {
 	struct sh_tmu_priv *p = cs_to_sh_tmu(cs);
-	int ret;
-
-	ret = sh_tmu_enable(p);
-	if (ret)
-		return ret;
 
-	/* TODO: calculate good shift from rate and counter bit width */
-	cs->shift = 10;
-	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
-	return 0;
+	return sh_tmu_enable(p);
 }
 
 static void sh_tmu_clocksource_disable(struct clocksource *cs)
@@ -228,6 +220,16 @@ static int sh_tmu_register_clocksource(struct sh_tmu_priv *p,
 	cs->disable = sh_tmu_clocksource_disable;
 	cs->mask = CLOCKSOURCE_MASK(32);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	/* clk_get_rate() needs an enabled clock */
+	clk_enable(p->clk);
+	/* channel will be configured at parent clock / 4 */
+	p->rate = clk_get_rate(p->clk) / 4;
+	clk_disable(p->clk);
+	/* TODO: calculate good shift from rate and counter bit width */
+	cs->shift = 10;
+	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+
 	dev_info(&p->pdev->dev, "used as clock source\n");
 	clocksource_register(cs);
 	return 0;
-- 
cgit v1.2.3-70-g09d2


From f4d7c3565c1692c54d9152b52090fe73f0029e37 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 2 Jun 2010 17:10:44 +0900
Subject: clocksource: sh_cmt: compute mult and shift before registration

Based on the sh_tmu change in 66f49121ffa41a19c59965b31b046d8368fec3c7
("clocksource: sh_tmu: compute mult and shift before registration").
The same issues impact the sh_cmt driver, so we take the same approach
here.

Cc: stable@kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/clocksource/sh_cmt.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index f6677cb1978..f3d3898898e 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -412,18 +412,10 @@ static cycle_t sh_cmt_clocksource_read(struct clocksource *cs)
 static int sh_cmt_clocksource_enable(struct clocksource *cs)
 {
 	struct sh_cmt_priv *p = cs_to_sh_cmt(cs);
-	int ret;
 
 	p->total_cycles = 0;
 
-	ret = sh_cmt_start(p, FLAG_CLOCKSOURCE);
-	if (ret)
-		return ret;
-
-	/* TODO: calculate good shift from rate and counter bit width */
-	cs->shift = 0;
-	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
-	return 0;
+	return sh_cmt_start(p, FLAG_CLOCKSOURCE);
 }
 
 static void sh_cmt_clocksource_disable(struct clocksource *cs)
@@ -450,8 +442,20 @@ static int sh_cmt_register_clocksource(struct sh_cmt_priv *p,
 	cs->resume = sh_cmt_clocksource_resume;
 	cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	/* clk_get_rate() needs an enabled clock */
+	clk_enable(p->clk);
+	p->rate = clk_get_rate(p->clk) / (p->width == 16) ? 512 : 8;
+	clk_disable(p->clk);
+
+	/* TODO: calculate good shift from rate and counter bit width */
+	cs->shift = 10;
+	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+
 	dev_info(&p->pdev->dev, "used as clock source\n");
+
 	clocksource_register(cs);
+
 	return 0;
 }
 
-- 
cgit v1.2.3-70-g09d2


From f4cdd757bef262a16188fa89141cc243a9cfc81b Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 2 Jun 2010 00:27:26 +0000
Subject: sh: make sure static declaration on mach-ap325rxa

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ap325rxa/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 57e37e28420..3a170bd3f3d 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -328,7 +328,7 @@ static struct soc_camera_platform_info camera_info = {
 	.set_capture = camera_set_capture,
 };
 
-struct soc_camera_link camera_link = {
+static struct soc_camera_link camera_link = {
 	.bus_id		= 0,
 	.add_device	= ap325rxa_camera_add,
 	.del_device	= ap325rxa_camera_del,
-- 
cgit v1.2.3-70-g09d2


From 3ce0933437763f692c669d07d1b7b016b9e2fa41 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 2 Jun 2010 00:27:31 +0000
Subject: sh: make sure static declaration on mach-ecovec24

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 778eb7cb987..be1d114d3a4 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -140,7 +140,7 @@ static struct resource sh_eth_resources[] = {
 	},
 };
 
-struct sh_eth_plat_data sh_eth_plat = {
+static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8700 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
 	.ether_link_active_low = 1
@@ -160,7 +160,7 @@ static struct platform_device sh_eth_device = {
 };
 
 /* USB0 host */
-void usb0_port_power(int port, int power)
+static void usb0_port_power(int port, int power)
 {
 	gpio_set_value(GPIO_PTB4, power);
 }
@@ -196,7 +196,7 @@ static struct platform_device usb0_host_device = {
 };
 
 /* USB1 host/function */
-void usb1_port_power(int port, int power)
+static void usb1_port_power(int port, int power)
 {
 	gpio_set_value(GPIO_PTB5, power);
 }
@@ -422,7 +422,7 @@ static int ts_init(void)
 	return 0;
 }
 
-struct tsc2007_platform_data tsc2007_info = {
+static struct tsc2007_platform_data tsc2007_info = {
 	.model			= 2007,
 	.x_plate_ohms		= 180,
 	.get_pendown_state	= ts_get_pendown_state,
@@ -723,7 +723,7 @@ static struct clk fsimckb_clk = {
 	.rate		= 0, /* unknown */
 };
 
-struct sh_fsi_platform_info fsi_info = {
+static struct sh_fsi_platform_info fsi_info = {
 	.portb_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
 		       SH_FSI_IN_SLAVE_MODE |
@@ -780,7 +780,7 @@ static struct platform_device irda_device = {
 #include <media/ak881x.h>
 #include <media/sh_vou.h>
 
-struct ak881x_pdata ak881x_pdata = {
+static struct ak881x_pdata ak881x_pdata = {
 	.flags = AK881X_IF_MODE_SLAVE,
 };
 
@@ -789,7 +789,7 @@ static struct i2c_board_info ak8813 = {
 	.platform_data = &ak881x_pdata,
 };
 
-struct sh_vou_pdata sh_vou_pdata = {
+static struct sh_vou_pdata sh_vou_pdata = {
 	.bus_fmt	= SH_VOU_BUS_8BIT,
 	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
 	.board_info	= &ak8813,
@@ -853,7 +853,7 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-struct sh_mmcif_plat_data sh_mmcif_plat = {
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.set_pwr	= mmcif_set_pwr,
 	.down_pwr	= mmcif_down_pwr,
 	.sup_pclk	= 0, /* SH7724: Max Pclk/2 */
-- 
cgit v1.2.3-70-g09d2


From 30e0cc1ae0ca961de2764f584021c90d774d1063 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 2 Jun 2010 00:27:46 +0000
Subject: sh: make sure static declaration on mach-migor

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-migor/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 87185de2044..662debe4ead 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -181,7 +181,7 @@ static int migor_nand_flash_ready(struct mtd_info *mtd)
 	return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
 }
 
-struct platform_nand_data migor_nand_flash_data = {
+static struct platform_nand_data migor_nand_flash_data = {
 	.chip = {
 		.nr_chips = 1,
 		.partitions = migor_nand_flash_partitions,
-- 
cgit v1.2.3-70-g09d2


From 560526f1617acca62b645c81fb43923954d4ddc5 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 2 Jun 2010 00:27:38 +0000
Subject: sh: make sure static declaration on ms7724se

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index f9b82546c2d..552ebd9ba82 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -283,7 +283,7 @@ static struct clk fsimcka_clk = {
 };
 
 /* change J20, J21, J22 pin to 1-2 connection to use slave mode */
-struct sh_fsi_platform_info fsi_info = {
+static struct sh_fsi_platform_info fsi_info = {
 	.porta_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
 		       SH_FSI_IN_SLAVE_MODE |
@@ -371,7 +371,7 @@ static struct resource sh_eth_resources[] = {
 	},
 };
 
-struct sh_eth_plat_data sh_eth_plat = {
+static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8187 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
 };
@@ -535,7 +535,7 @@ static struct platform_device irda_device = {
 #include <media/ak881x.h>
 #include <media/sh_vou.h>
 
-struct ak881x_pdata ak881x_pdata = {
+static struct ak881x_pdata ak881x_pdata = {
 	.flags = AK881X_IF_MODE_SLAVE,
 };
 
@@ -545,7 +545,7 @@ static struct i2c_board_info ak8813 = {
 	.platform_data = &ak881x_pdata,
 };
 
-struct sh_vou_pdata sh_vou_pdata = {
+static struct sh_vou_pdata sh_vou_pdata = {
 	.bus_fmt	= SH_VOU_BUS_8BIT,
 	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
 	.board_info	= &ak8813,
-- 
cgit v1.2.3-70-g09d2


From ac422f9443191e050c16fe99baeb5c3d74934589 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 2 Jun 2010 18:10:00 +0900
Subject: sh: Make intc messages consistent via pr_fmt.

Wrapping pr_fmt to the KBUILD_MODNAME prefix seems to be the trendy
thing to do these days, so just do that instead of manually tidying
up the stragglers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/intc.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index c585574b9ae..e91a23e5ffd 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -16,6 +16,8 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/module.h>
@@ -855,8 +857,8 @@ static void __init intc_register_irq(struct intc_desc *desc,
 		primary = 1;
 
 	if (!data[0] && !data[1])
-		pr_warning("intc: missing unique irq mask for "
-			   "irq %d (vect 0x%04x)\n", irq, irq2evt(irq));
+		pr_warning("missing unique irq mask for irq %d (vect 0x%04x)\n",
+			   irq, irq2evt(irq));
 
 	data[0] = data[0] ? data[0] : intc_mask_data(desc, d, enum_id, 1);
 	data[1] = data[1] ? data[1] : intc_prio_data(desc, d, enum_id, 1);
@@ -952,7 +954,7 @@ int __init register_intc_controller(struct intc_desc *desc)
 	struct intc_desc_int *d;
 	struct resource *res;
 
-	pr_info("intc: Registered controller '%s' with %u IRQs\n",
+	pr_info("Registered controller '%s' with %u IRQs\n",
 		desc->name, hw->nr_vectors);
 
 	d = kzalloc(sizeof(*d), GFP_NOWAIT);
@@ -1148,7 +1150,7 @@ int register_intc_userimask(unsigned long addr)
 	if (unlikely(!uimask))
 		return -ENOMEM;
 
-	pr_info("intc: userimask support registered for levels 0 -> %d\n",
+	pr_info("userimask support registered for levels 0 -> %d\n",
 		default_prio_level - 1);
 
 	return 0;
@@ -1286,7 +1288,7 @@ static int __init register_intc_sysdevs(void)
 	}
 
 	if (error)
-		pr_err("intc: sysdev registration error\n");
+		pr_err("sysdev registration error\n");
 
 	return error;
 }
-- 
cgit v1.2.3-70-g09d2