From e717cc6c07f006be36e35189aacb28be4e30ad14 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Tue, 8 Dec 2009 14:23:11 +0000 Subject: sh: Can't compare physical and virtual addresses for aliases It does not make sense to compare virtual and physical addresses for aliasing, only virtual addresses can be compared for aliases. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/mm/cache-sh4.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index f36a08bf3d5..560ddb6bc8a 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -256,8 +256,7 @@ static void sh4_flush_cache_page(void *args) address = (unsigned long)vaddr; } - if (pages_do_alias(address, phys)) - flush_cache_one(CACHE_OC_ADDRESS_ARRAY | + flush_cache_one(CACHE_OC_ADDRESS_ARRAY | (address & shm_align_mask), phys); if (vma->vm_flags & VM_EXEC) -- cgit v1.2.3-70-g09d2 From 87a705dde49d0c482fa818f0923af59ed0954d5d Mon Sep 17 00:00:00 2001 From: Francesco VIRLINZI Date: Fri, 4 Dec 2009 08:57:58 +0000 Subject: sh: intc: Fixed resume from hibernation This patch fixes the resume from hibernation in the intc sysdev device when it manages 'redirect' irq Signed-off-by: Francesco Virlinzi Signed-off-by: Paul Mundt --- drivers/sh/intc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c index a7e5c2e9986..88f5aaf62fd 100644 --- a/drivers/sh/intc.c +++ b/drivers/sh/intc.c @@ -806,6 +806,8 @@ static int intc_suspend(struct sys_device *dev, pm_message_t state) if (d->state.event != PM_EVENT_FREEZE) break; for_each_irq_desc(irq, desc) { + if (desc->handle_irq == intc_redirect_irq) + continue if (desc->chip != &d->chip) continue; if (desc->status & IRQ_DISABLED) -- cgit v1.2.3-70-g09d2 From f701b3999890b867f87733c146d4cdf9319ead05 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Mon, 7 Dec 2009 10:38:55 +0100 Subject: sh: Replace an explicit computation by the use of the container_of macro The macro container_of from kernel.h performs the same pointer arithmetic operation. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ type T; expression mptr; expression member; @@ - (void *)((char *)mptr - offsetof(T, member)) + container_of(mptr, T, member) // Signed-off-by: Nicolas Palix Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/irq/ipr.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index c1508a90fc6..9282d965a1b 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -17,16 +17,17 @@ * for more details. */ #include +#include +#include #include +#include #include -#include -#include #include static inline struct ipr_desc *get_ipr_desc(unsigned int irq) { struct irq_chip *chip = get_irq_chip(irq); - return (void *)((char *)chip - offsetof(struct ipr_desc, chip)); + return container_of(chip, struct ipr_desc, chip); } static void disable_ipr_irq(unsigned int irq) -- cgit v1.2.3-70-g09d2 From f3a4c00ad35a9f21db82516fdc600cb1be301c23 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 7 Dec 2009 14:11:59 +0000 Subject: sh: fix size calculation for NUMA node 0 Fix the NUMA size calculation for node 0. Do the same as the UMA version of setup_memory() and use address instead of pfn when calculating the size. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/mm/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c index 6c524446c0f..b44e8352667 100644 --- a/arch/sh/mm/numa.c +++ b/arch/sh/mm/numa.c @@ -28,7 +28,7 @@ void __init setup_memory(void) { unsigned long free_pfn = PFN_UP(__pa(_end)); u64 base = min_low_pfn << PAGE_SHIFT; - u64 size = (max_low_pfn << PAGE_SHIFT) - min_low_pfn; + u64 size = (max_low_pfn << PAGE_SHIFT) - base; lmb_add(base, size); -- cgit v1.2.3-70-g09d2 From b25b9758466bb8bc837f1863389015820f7cb11d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 7 Dec 2009 14:16:07 +0000 Subject: sh: NUMA lmb fixes This patch updates the NUMA version of setup_memory() with UMA code changes and also modifies the last argument to lmb_alloc_base() to use an address instead of pfn. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/mm/numa.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c index b44e8352667..422e9272187 100644 --- a/arch/sh/mm/numa.c +++ b/arch/sh/mm/numa.c @@ -37,6 +37,15 @@ void __init setup_memory(void) (PFN_PHYS(free_pfn) + PAGE_SIZE - 1) - (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET)); + /* + * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET. + */ + if (CONFIG_ZERO_PAGE_OFFSET != 0) + lmb_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET); + + lmb_analyze(); + lmb_dump_all(); + /* * Node 0 sets up its pgdat at the first available pfn, * and bumps it up before setting up the bootmem allocator. @@ -71,7 +80,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end) /* Node-local pgdat */ NODE_DATA(nid) = __va(lmb_alloc_base(sizeof(struct pglist_data), - SMP_CACHE_BYTES, end_pfn)); + SMP_CACHE_BYTES, end)); memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); NODE_DATA(nid)->bdata = &bootmem_node_data[nid]; @@ -81,7 +90,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end) /* Node-local bootmap */ bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn); bootmem_paddr = lmb_alloc_base(bootmap_pages << PAGE_SHIFT, - PAGE_SIZE, end_pfn); + PAGE_SIZE, end); init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT, start_pfn, end_pfn); -- cgit v1.2.3-70-g09d2 From ef61aae4ddf1dbd0e9b6ad21e2e57632a8fe76f6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 7 Dec 2009 14:20:06 +0000 Subject: sh: add a start_transfer() callback to the LCDC driver This patch adds a ->start_transfer() callback to the driver sh_mobile_lcdcfb.c. The callback is used to program the LCDC panel in the case of one-shot mode. Needed by the LCD controller used on the KFR2R09 board. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/video/sh_mobile_lcdcfb.c | 10 +++++++++- include/video/sh_mobile_lcdc.h | 2 ++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index b4b5de930cf..d346bbab6ca 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -281,6 +281,7 @@ static void sh_mobile_lcdc_deferred_io(struct fb_info *info, struct list_head *pagelist) { struct sh_mobile_lcdc_chan *ch = info->par; + struct sh_mobile_lcdc_board_cfg *bcfg = &ch->cfg.board_cfg; /* enable clocks before accessing hardware */ sh_mobile_lcdc_clk_on(ch->lcdc); @@ -305,10 +306,17 @@ static void sh_mobile_lcdc_deferred_io(struct fb_info *info, /* trigger panel update */ dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); + if (bcfg->start_transfer) + bcfg->start_transfer(bcfg->board_data, ch, + &sh_mobile_lcdc_sys_bus_ops); lcdc_write_chan(ch, LDSM2R, 1); dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); - } else + } else { + if (bcfg->start_transfer) + bcfg->start_transfer(bcfg->board_data, ch, + &sh_mobile_lcdc_sys_bus_ops); lcdc_write_chan(ch, LDSM2R, 1); + } } static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info) diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h index 25144ab22b9..28820545771 100644 --- a/include/video/sh_mobile_lcdc.h +++ b/include/video/sh_mobile_lcdc.h @@ -50,6 +50,8 @@ struct sh_mobile_lcdc_board_cfg { void *board_data; int (*setup_sys)(void *board_data, void *sys_ops_handle, struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + void (*start_transfer)(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); void (*display_on)(void *board_data); void (*display_off)(void *board_data); }; -- cgit v1.2.3-70-g09d2 From 657bf0bd068b2dc5244d553be66daac0a9e745d1 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 7 Dec 2009 14:26:05 +0000 Subject: sh: LCDC start_transfer() for the KFR2R09 board This patch adds a ->start_transfer() callback to the KFR2R09 lcd handling code. The callback is used to notify the lcd controller that a new frame of data is about to be transferred. The callback is only used in combination with deferred io, but the code has been tested both with and without deferred io enabled. Without this patch the display data on the KFR2R09 lcd panel becomes corrupted over time. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-kfr2r09/lcd_wqvga.c | 6 ++++++ arch/sh/boards/mach-kfr2r09/setup.c | 1 + arch/sh/include/mach-kfr2r09/mach/kfr2r09.h | 6 ++++++ 3 files changed, 13 insertions(+) diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c index 8ccb1cc8b58..e9b970846c4 100644 --- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c +++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c @@ -273,6 +273,12 @@ int kfr2r09_lcd_setup(void *board_data, void *sohandle, return 0; } +void kfr2r09_lcd_start(void *board_data, void *sohandle, + struct sh_mobile_lcdc_sys_bus_ops *so) +{ + write_memory_start(sohandle, so); +} + #define CTRL_CKSW 0x10 #define CTRL_C10 0x20 #define CTRL_CPSW 0x80 diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 87438d6603d..5cf7a6e8aea 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -149,6 +149,7 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = { }, .board_cfg = { .setup_sys = kfr2r09_lcd_setup, + .start_transfer = kfr2r09_lcd_start, .display_on = kfr2r09_lcd_on, .display_off = kfr2r09_lcd_off, }, diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h index 174374e1954..484ef42c2fb 100644 --- a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h +++ b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h @@ -8,6 +8,8 @@ void kfr2r09_lcd_on(void *board_data); void kfr2r09_lcd_off(void *board_data); int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle, struct sh_mobile_lcdc_sys_bus_ops *sys_ops); +void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); #else static inline void kfr2r09_lcd_on(void *board_data) {} static inline void kfr2r09_lcd_off(void *board_data) {} @@ -16,6 +18,10 @@ static inline int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle, { return -ENODEV; } +static inline void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops) +{ +} #endif #endif /* __ASM_SH_KFR2R09_H */ -- cgit v1.2.3-70-g09d2 From fb2e9daffe32ba1bf8e777a841f7206acf567aac Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 8 Dec 2009 00:18:20 +0000 Subject: sh: mach-ap325rxa: Add SOCAM_DATA_ACTIVE_HIGH flags for soc-camera Current soc-camera needs SOCAM_DATA_ACTIVE_xxx flags for use. We can not open old ncm03j camera device without this patch. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ap325rxa/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index cf9dc12dfeb..4b4320b0b48 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -322,7 +322,8 @@ static struct soc_camera_platform_info camera_info = { .height = 480, }, .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | - SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 | + SOCAM_DATA_ACTIVE_HIGH, .set_capture = camera_set_capture, .link = { .bus_id = 0, -- cgit v1.2.3-70-g09d2 From 0a753d58f901913e3e6416baeac437ee83eda90d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 9 Dec 2009 14:36:16 +0900 Subject: sh: intc: Fixup compile breakage. The resume from hibernation patch introduced build failure, fix it up.. Signed-off-by: Paul Mundt --- drivers/sh/intc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c index 88f5aaf62fd..d5d7f23c19a 100644 --- a/drivers/sh/intc.c +++ b/drivers/sh/intc.c @@ -807,7 +807,7 @@ static int intc_suspend(struct sys_device *dev, pm_message_t state) break; for_each_irq_desc(irq, desc) { if (desc->handle_irq == intc_redirect_irq) - continue + continue; if (desc->chip != &d->chip) continue; if (desc->status & IRQ_DISABLED) -- cgit v1.2.3-70-g09d2 From d2d69a3ab2e62bcf8e5f5303bde024033face902 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 9 Dec 2009 05:21:42 +0000 Subject: sh: mach-ecovec24: MEMORY_SIZE fixup Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/configs/ecovec24-romimage_defconfig | 2 +- arch/sh/configs/ecovec24_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig index 0774924623c..46874704e4e 100644 --- a/arch/sh/configs/ecovec24-romimage_defconfig +++ b/arch/sh/configs/ecovec24-romimage_defconfig @@ -203,7 +203,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 -CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_MEMORY_SIZE=0x10000000 CONFIG_29BIT=y # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig index ac6469718a2..cad918437ca 100644 --- a/arch/sh/configs/ecovec24_defconfig +++ b/arch/sh/configs/ecovec24_defconfig @@ -204,7 +204,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 -CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_MEMORY_SIZE=0x10000000 CONFIG_29BIT=y # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y -- cgit v1.2.3-70-g09d2 From ca6f2d7fafd2d48b2f6943f5c6787beaec2014d0 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 9 Dec 2009 15:51:27 +0900 Subject: sh: pfc: Fixup type mismatch in debug printks. !!value works out to an int while we were still using %ld, so fix this up and shut gcc up. Signed-off-by: Paul Mundt --- drivers/sh/pfc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/sh/pfc.c b/drivers/sh/pfc.c index 841ed5030c8..082604edc4c 100644 --- a/drivers/sh/pfc.c +++ b/drivers/sh/pfc.c @@ -71,7 +71,7 @@ static void gpio_write_bit(struct pinmux_data_reg *dr, pos = dr->reg_width - (in_pos + 1); - pr_debug("write_bit addr = %lx, value = %ld, pos = %ld, " + pr_debug("write_bit addr = %lx, value = %d, pos = %ld, " "r_width = %ld\n", dr->reg, !!value, pos, dr->reg_width); -- cgit v1.2.3-70-g09d2 From d580cd96c8ee0c2647b810a2a8762cf631a5f97b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 11 Dec 2009 15:25:41 +0900 Subject: sh: ftrace: Fix up syscall tracing build. Syscall tracing metadata was shuffled around, update accordingly. Signed-off-by: Paul Mundt --- arch/sh/kernel/ftrace.c | 76 ++----------------------------------------------- 1 file changed, 2 insertions(+), 74 deletions(-) diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c index b6f41c109be..a48cdedc73b 100644 --- a/arch/sh/kernel/ftrace.c +++ b/arch/sh/kernel/ftrace.c @@ -401,82 +401,10 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ #ifdef CONFIG_FTRACE_SYSCALLS - -extern unsigned long __start_syscalls_metadata[]; -extern unsigned long __stop_syscalls_metadata[]; extern unsigned long *sys_call_table; -static struct syscall_metadata **syscalls_metadata; - -static struct syscall_metadata *find_syscall_meta(unsigned long *syscall) -{ - struct syscall_metadata *start; - struct syscall_metadata *stop; - char str[KSYM_SYMBOL_LEN]; - - - start = (struct syscall_metadata *)__start_syscalls_metadata; - stop = (struct syscall_metadata *)__stop_syscalls_metadata; - kallsyms_lookup((unsigned long) syscall, NULL, NULL, NULL, str); - - for ( ; start < stop; start++) { - if (start->name && !strcmp(start->name, str)) - return start; - } - - return NULL; -} - -struct syscall_metadata *syscall_nr_to_meta(int nr) -{ - if (!syscalls_metadata || nr >= FTRACE_SYSCALL_MAX || nr < 0) - return NULL; - - return syscalls_metadata[nr]; -} - -int syscall_name_to_nr(char *name) -{ - int i; - - if (!syscalls_metadata) - return -1; - for (i = 0; i < NR_syscalls; i++) - if (syscalls_metadata[i]) - if (!strcmp(syscalls_metadata[i]->name, name)) - return i; - return -1; -} - -void set_syscall_enter_id(int num, int id) -{ - syscalls_metadata[num]->enter_id = id; -} - -void set_syscall_exit_id(int num, int id) -{ - syscalls_metadata[num]->exit_id = id; -} - -static int __init arch_init_ftrace_syscalls(void) +unsigned long __init arch_syscall_addr(int nr) { - int i; - struct syscall_metadata *meta; - unsigned long **psys_syscall_table = &sys_call_table; - - syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * - FTRACE_SYSCALL_MAX, GFP_KERNEL); - if (!syscalls_metadata) { - WARN_ON(1); - return -ENOMEM; - } - - for (i = 0; i < FTRACE_SYSCALL_MAX; i++) { - meta = find_syscall_meta(psys_syscall_table[i]); - syscalls_metadata[i] = meta; - } - - return 0; + return (unsigned long)sys_call_table[nr]; } -arch_initcall(arch_init_ftrace_syscalls); #endif /* CONFIG_FTRACE_SYSCALLS */ -- cgit v1.2.3-70-g09d2 From c89fbd3987d058fad3ea072aab68adfbdd13e498 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 11 Dec 2009 15:29:31 +0900 Subject: sh: Wire up recvmmsg syscall. The stub already existed in the _64 syscall table, but was lacking a __NR_recvmmsg definition, while it was absent entirely for _32 variants. Signed-off-by: Paul Mundt --- arch/sh/include/asm/unistd_32.h | 3 ++- arch/sh/include/asm/unistd_64.h | 3 ++- arch/sh/kernel/syscalls_32.S | 1 + 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h index f3fd1b9eb6b..f18c4f9baf2 100644 --- a/arch/sh/include/asm/unistd_32.h +++ b/arch/sh/include/asm/unistd_32.h @@ -345,8 +345,9 @@ #define __NR_pwritev 334 #define __NR_rt_tgsigqueueinfo 335 #define __NR_perf_event_open 336 +#define __NR_recvmmsg 337 -#define NR_syscalls 337 +#define NR_syscalls 338 #ifdef __KERNEL__ diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h index 343ce8f073e..3e7645d1113 100644 --- a/arch/sh/include/asm/unistd_64.h +++ b/arch/sh/include/asm/unistd_64.h @@ -385,10 +385,11 @@ #define __NR_pwritev 362 #define __NR_rt_tgsigqueueinfo 363 #define __NR_perf_event_open 364 +#define __NR_recvmmsg 365 #ifdef __KERNEL__ -#define NR_syscalls 365 +#define NR_syscalls 366 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index 19fd11dd987..4bd5a114695 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -353,3 +353,4 @@ ENTRY(sys_call_table) .long sys_pwritev .long sys_rt_tgsigqueueinfo /* 335 */ .long sys_perf_event_open + .long sys_recvmmsg -- cgit v1.2.3-70-g09d2 From fcb4ebd678858850e8b029909064175cb627868d Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Fri, 11 Dec 2009 22:58:17 +0000 Subject: sh: Couple kernel and user write page perm bits for CONFIG_X2TLB pte_write() should check whether the permissions include either the user or kernel write permission bits. Likewise, pte_wrprotect() needs to remove both the kernel and user write bits. Without this patch handle_tlbmiss() doesn't handle faulting in pages from the P3 area (our vmalloc space) because of a write. Mappings of the P3 space have the _PAGE_EXT_KERN_WRITE bit but not _PAGE_EXT_USER_WRITE. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/include/asm/pgtable_32.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h index b3543551620..5003ee86f67 100644 --- a/arch/sh/include/asm/pgtable_32.h +++ b/arch/sh/include/asm/pgtable_32.h @@ -344,7 +344,8 @@ static inline void set_pte(pte_t *ptep, pte_t pte) #define pte_special(pte) ((pte).pte_low & _PAGE_SPECIAL) #ifdef CONFIG_X2TLB -#define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE) +#define pte_write(pte) \ + ((pte).pte_high & (_PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE)) #else #define pte_write(pte) ((pte).pte_low & _PAGE_RW) #endif @@ -358,7 +359,7 @@ static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; } * individually toggled (and user permissions are entirely decoupled from * kernel permissions), we attempt to couple them a bit more sanely here. */ -PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE); +PTE_BIT_FUNC(high, wrprotect, &= ~(_PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE)); PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE); PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE); #else -- cgit v1.2.3-70-g09d2 From 1232d88a47626cad13ba82f3a9ea814820bc1c65 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 14 Dec 2009 11:46:09 +0900 Subject: sh: Make the unaligned trap handler always obey notification levels. Presently there are a couple of paths in to the alignment handler, where only the address error path presently quiets the notificiation messages based on the configuration settings. We carry over the notification level tests to the default alignment handler itself incase so that they behave uniformly. Signed-off-by: Paul Mundt --- arch/sh/kernel/traps_32.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index 3da5a125d88..86639beac3a 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -452,12 +452,18 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs, rm = regs->regs[index]; /* shout about fixups */ - if (!expected && printk_ratelimit()) - printk(KERN_NOTICE "Fixing up unaligned %s access " - "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", - user_mode(regs) ? "userspace" : "kernel", - current->comm, task_pid_nr(current), - (void *)regs->pc, instruction); + if (!expected) { + if (user_mode(regs) && (se_usermode & 1) && printk_ratelimit()) + pr_notice("Fixing up unaligned userspace access " + "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", + current->comm, task_pid_nr(current), + (void *)regs->pc, instruction); + else if (se_kernmode_warn && printk_ratelimit()) + pr_notice("Fixing up unaligned kernel access " + "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", + current->comm, task_pid_nr(current), + (void *)regs->pc, instruction); + } ret = -EFAULT; switch (instruction&0xF000) { -- cgit v1.2.3-70-g09d2 From bf3cdeda901c7f42de3cddc8c5aa19f6b8d8f9df Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 14 Dec 2009 14:23:41 +0900 Subject: sh: wire up vmallocinfo support in ioremap() implementations. This wires up the caller information for the ioremap VMA, which allows for more helpful caller tracking via /proc/vmallocinfo. Follows the x86 and powerpc changes of the same nature. Signed-off-by: Paul Mundt --- arch/sh/include/asm/io.h | 10 ++++++++-- arch/sh/mm/ioremap_32.c | 10 +++++----- arch/sh/mm/ioremap_64.c | 6 +++--- 3 files changed, 16 insertions(+), 10 deletions(-) diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index 512cd3e9d0c..988c1be58e5 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -233,10 +233,16 @@ unsigned long long poke_real_address_q(unsigned long long addr, * doesn't exist, so everything must go through page tables. */ #ifdef CONFIG_MMU -void __iomem *__ioremap(unsigned long offset, unsigned long size, - unsigned long flags); +void __iomem *__ioremap_caller(unsigned long offset, unsigned long size, + unsigned long flags, void *caller); void __iounmap(void __iomem *addr); +static inline void __iomem * +__ioremap(unsigned long offset, unsigned long size, unsigned long flags) +{ + return __ioremap_caller(offset, size, flags, __builtin_return_address(0)); +} + static inline void __iomem * __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) { diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c index a86eaa9d75a..2141befb4f9 100644 --- a/arch/sh/mm/ioremap_32.c +++ b/arch/sh/mm/ioremap_32.c @@ -33,10 +33,10 @@ * have to convert them into an offset in a page-aligned mapping, but the * caller shouldn't need to know that small detail. */ -void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, - unsigned long flags) +void __iomem *__ioremap_caller(unsigned long phys_addr, unsigned long size, + unsigned long flags, void *caller) { - struct vm_struct * area; + struct vm_struct *area; unsigned long offset, last_addr, addr, orig_addr; pgprot_t pgprot; @@ -67,7 +67,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, /* * Ok, go for it.. */ - area = get_vm_area(size, VM_IOREMAP); + area = get_vm_area_caller(size, VM_IOREMAP, caller); if (!area) return NULL; area->phys_addr = phys_addr; @@ -103,7 +103,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, return (void __iomem *)(offset + (char *)orig_addr); } -EXPORT_SYMBOL(__ioremap); +EXPORT_SYMBOL(__ioremap_caller); void __iounmap(void __iomem *addr) { diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c index b16843d02b7..ef434657d42 100644 --- a/arch/sh/mm/ioremap_64.c +++ b/arch/sh/mm/ioremap_64.c @@ -258,15 +258,15 @@ static void shmedia_unmapioaddr(unsigned long vaddr) pte_clear(&init_mm, vaddr, ptep); } -void __iomem *__ioremap(unsigned long offset, unsigned long size, - unsigned long flags) +void __iomem *__ioremap_caller(unsigned long offset, unsigned long size, + unsigned long flags, void *caller) { char name[14]; sprintf(name, "phys_%08x", (u32)offset); return shmedia_alloc_io(offset, size, name, flags); } -EXPORT_SYMBOL(__ioremap); +EXPORT_SYMBOL(__ioremap_caller); void __iounmap(void __iomem *virtual) { -- cgit v1.2.3-70-g09d2 From 0eb37e26ed332b2a96630cf7f7ebe9fddb41cc3c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 14 Dec 2009 14:55:45 +0900 Subject: sh: Stub in P3 ioremap support for nommu parts. p3_ioremap() references __ioremap() which is presently undefined on nommu. This provides a trivial stub to fix the build up. Signed-off-by: Paul Mundt --- arch/sh/include/asm/io.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index 988c1be58e5..026dd659a64 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -277,6 +277,7 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) return __ioremap(offset, size, flags); } #else +#define __ioremap(offset, size, flags) ((void __iomem *)(offset)) #define __ioremap_mode(offset, size, flags) ((void __iomem *)(offset)) #define __iounmap(addr) do { } while (0) #endif /* CONFIG_MMU */ -- cgit v1.2.3-70-g09d2 From 7b6fd3bf82c4901f6ba0101ba71a5c507c24f9cf Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 14 Dec 2009 10:24:42 +0000 Subject: sh-sci: Extend sh-sci driver with early console V2 This is V2 of early serial console support for the sh-sci driver. The early serial console is using early platform devices and "earlyprintk". To use this feature the early platform devices must be broken out to one device per port and the desired port should be selected on the kernel command line like: "earlyprintk=sh-sci.N[,baudrate][,keep]" Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/early_printk.c | 10 +------- arch/sh/kernel/setup.c | 3 +++ drivers/serial/sh-sci.c | 54 +++++++++++++++++++++++++++++++++++-------- 3 files changed, 49 insertions(+), 18 deletions(-) diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 81a46145ffa..fe7dc3fe1db 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -191,15 +191,7 @@ static void scif_sercon_init(char *s) * Setup a default console, if more than one is compiled in, rely on the * earlyprintk= parsing to give priority. */ -static struct console *early_console = -#ifdef CONFIG_SH_STANDARD_BIOS - &bios_console -#elif defined(CONFIG_EARLY_SCIF_CONSOLE) - &scif_console -#else - NULL -#endif - ; +static struct console *early_console; static int __init setup_early_printk(char *buf) { diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 5a947a2567e..8b0e69792cf 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -423,6 +423,9 @@ void __init setup_arch(char **cmdline_p) plat_early_device_setup(); + /* Let earlyprintk output early console messages */ + early_platform_driver_probe("earlyprintk", 1, 1); + sh_mv_setup(); /* diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index ff38dbdb5c6..d96c7c7f1b2 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1043,10 +1043,14 @@ static void __devinit sci_init_single(struct platform_device *dev, sci_port->port.iotype = UPIO_MEM; sci_port->port.line = index; sci_port->port.fifosize = 1; - sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; - sci_port->dclk = clk_get(&dev->dev, "peripheral_clk"); - sci_port->enable = sci_clk_enable; - sci_port->disable = sci_clk_disable; + + if (dev) { + sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; + sci_port->dclk = clk_get(&dev->dev, "peripheral_clk"); + sci_port->enable = sci_clk_enable; + sci_port->disable = sci_clk_disable; + sci_port->port.dev = &dev->dev; + } sci_port->break_timer.data = (unsigned long)sci_port; sci_port->break_timer.function = sci_break_timer; @@ -1057,7 +1061,6 @@ static void __devinit sci_init_single(struct platform_device *dev, sci_port->port.irq = p->irqs[SCIx_TXI_IRQ]; sci_port->port.flags = p->flags; - sci_port->port.dev = &dev->dev; sci_port->type = sci_port->port.type = p->type; memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); @@ -1101,7 +1104,7 @@ static void serial_console_write(struct console *co, const char *s, sci_port->disable(port); } -static int __init serial_console_setup(struct console *co, char *options) +static int __devinit serial_console_setup(struct console *co, char *options) { struct sci_port *sci_port; struct uart_port *port; @@ -1119,9 +1122,14 @@ static int __init serial_console_setup(struct console *co, char *options) if (co->index >= SCI_NPORTS) co->index = 0; - sci_port = &sci_ports[co->index]; - port = &sci_port->port; - co->data = port; + if (co->data) { + port = co->data; + sci_port = to_sci_port(port); + } else { + sci_port = &sci_ports[co->index]; + port = &sci_port->port; + co->data = port; + } /* * Also need to check port->type, we don't actually have any @@ -1165,6 +1173,15 @@ static int __init sci_console_init(void) return 0; } console_initcall(sci_console_init); + +static struct sci_port early_serial_port; +static struct console early_serial_console = { + .name = "early_ttySC", + .write = serial_console_write, + .flags = CON_PRINTBUFFER, +}; +static char early_serial_buf[32]; + #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) @@ -1250,6 +1267,21 @@ static int __devinit sci_probe(struct platform_device *dev) struct sh_sci_priv *priv; int i, ret = -EINVAL; +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE + if (is_early_platform_device(dev)) { + if (dev->id == -1) + return -ENOTSUPP; + early_serial_console.index = dev->id; + early_serial_console.data = &early_serial_port.port; + sci_init_single(NULL, &early_serial_port, dev->id, p); + serial_console_setup(&early_serial_console, early_serial_buf); + if (!strstr(early_serial_buf, "keep")) + early_serial_console.flags |= CON_BOOT; + register_console(&early_serial_console); + return 0; + } +#endif + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -1349,6 +1381,10 @@ static void __exit sci_exit(void) uart_unregister_driver(&sci_uart_driver); } +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +early_platform_init_buffer("earlyprintk", &sci_driver, + early_serial_buf, ARRAY_SIZE(early_serial_buf)); +#endif module_init(sci_init); module_exit(sci_exit); -- cgit v1.2.3-70-g09d2 From 632fd800f54f361cd9d36dd48587756dab670ccf Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 14 Dec 2009 12:29:48 +0000 Subject: sh: sh2 scif pdata (sh7616) This patch breaks out the sh2 scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2/setup-sh7619.c | 71 +++++++++++++++++++++++------------ 1 file changed, 46 insertions(+), 25 deletions(-) diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index 8555c05e866..114c7cee718 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -59,32 +59,48 @@ static struct intc_prio_reg prio_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL, NULL, prio_registers, NULL); -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xf8400000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 88, 88, 88, 88 }, - }, { - .mapbase = 0xf8410000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 92, 92, 92, 92 }, - }, { - .mapbase = 0xf8420000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 96, 96, 96, 96 }, - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xf8400000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 88, 88, 88, 88 }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xf8410000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 92, 92, 92, 92 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xf8420000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 96, 96, 96, 96 }, +}; + +static struct platform_device scif2_device = { .name = "sh-sci", - .id = -1, + .id = 2, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif2_platform_data, }, }; @@ -176,7 +192,9 @@ static struct platform_device cmt1_device = { }; static struct platform_device *sh7619_devices[] __initdata = { - &sci_device, + &scif0_device, + &scif1_device, + &scif2_device, ð_device, &cmt0_device, &cmt1_device, @@ -195,6 +213,9 @@ void __init plat_irq_setup(void) } static struct platform_device *sh7619_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, &cmt0_device, &cmt1_device, }; -- cgit v1.2.3-70-g09d2 From be091d20efe7b045ca02bdf91c63c72d91f5899d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 14 Dec 2009 12:29:56 +0000 Subject: sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg) This patch breaks out the sh2a scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2a/setup-mxg.c | 23 ++--- arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 181 ++++++++++++++++++++++++--------- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 89 +++++++++++----- arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 89 +++++++++++----- 4 files changed, 263 insertions(+), 119 deletions(-) diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c index b6737644531..8f669dc9b0d 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c +++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c @@ -207,27 +207,23 @@ static struct platform_device mtu2_2_device = { .num_resources = ARRAY_SIZE(mtu2_2_resources), }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xff804000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 220, 220, 220, 220 }, - }, { - .flags = 0, - } +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xff804000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 220, 220, 220, 220 }, }; -static struct platform_device sci_device = { +static struct platform_device scif0_device = { .name = "sh-sci", - .id = -1, + .id = 0, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif0_platform_data, }, }; static struct platform_device *mxg_devices[] __initdata = { - &sci_device, + &scif0_device, &mtu2_0_device, &mtu2_1_device, &mtu2_2_device, @@ -246,6 +242,7 @@ void __init plat_irq_setup(void) } static struct platform_device *mxg_early_devices[] __initdata = { + &scif0_device, &mtu2_0_device, &mtu2_1_device, &mtu2_2_device, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c index fbde5b75deb..4ccfeb59eb1 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c @@ -177,57 +177,123 @@ static struct intc_mask_reg mask_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh7201", vectors, groups, mask_registers, prio_registers, NULL); -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xfffe8000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 180, 180, 180, 180 } - }, { - .mapbase = 0xfffe8800, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 184, 184, 184, 184 } - }, { - .mapbase = 0xfffe9000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 188, 188, 188, 188 } - }, { - .mapbase = 0xfffe9800, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 192, 192, 192, 192 } - }, { - .mapbase = 0xfffea000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 196, 196, 196, 196 } - }, { - .mapbase = 0xfffea800, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 200, 200, 200, 200 } - }, { - .mapbase = 0xfffeb000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 204, 204, 204, 204 } - }, { - .mapbase = 0xfffeb800, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 208, 208, 208, 208 } - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xfffe8000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 180, 180, 180, 180 } +}; + +static struct platform_device scif0_device = { .name = "sh-sci", - .id = -1, + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xfffe8800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 184, 184, 184, 184 } +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xfffe9000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 188, 188, 188, 188 } +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xfffe9800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 192, 192, 192, 192 } +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + +static struct plat_sci_port scif4_platform_data = { + .mapbase = 0xfffea000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 196, 196, 196, 196 } +}; + +static struct platform_device scif4_device = { + .name = "sh-sci", + .id = 4, + .dev = { + .platform_data = &scif4_platform_data, + }, +}; + +static struct plat_sci_port scif5_platform_data = { + .mapbase = 0xfffea800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 200, 200, 200, 200 } +}; + +static struct platform_device scif5_device = { + .name = "sh-sci", + .id = 5, + .dev = { + .platform_data = &scif5_platform_data, + }, +}; + +static struct plat_sci_port scif6_platform_data = { + .mapbase = 0xfffeb000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 204, 204, 204, 204 } +}; + +static struct platform_device scif6_device = { + .name = "sh-sci", + .id = 6, + .dev = { + .platform_data = &scif6_platform_data, + }, +}; + +static struct plat_sci_port scif7_platform_data = { + .mapbase = 0xfffeb800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 208, 208, 208, 208 } +}; + +static struct platform_device scif7_device = { + .name = "sh-sci", + .id = 7, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif7_platform_data, }, }; @@ -345,7 +411,14 @@ static struct platform_device mtu2_2_device = { }; static struct platform_device *sh7201_devices[] __initdata = { - &sci_device, + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, + &scif6_device, + &scif7_device, &rtc_device, &mtu2_0_device, &mtu2_1_device, @@ -365,6 +438,14 @@ void __init plat_irq_setup(void) } static struct platform_device *sh7201_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, + &scif6_device, + &scif7_device, &mtu2_0_device, &mtu2_1_device, &mtu2_2_device, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index d3fd536c9a8..3136966cc9b 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -173,37 +173,63 @@ static struct intc_mask_reg mask_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups, mask_registers, prio_registers, NULL); -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xfffe8000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 192, 192, 192, 192 }, - }, { - .mapbase = 0xfffe8800, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 196, 196, 196, 196 }, - }, { - .mapbase = 0xfffe9000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 200, 200, 200, 200 }, - }, { - .mapbase = 0xfffe9800, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 204, 204, 204, 204 }, - }, { - .flags = 0, - } +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xfffe8000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 192, 192, 192, 192 }, }; -static struct platform_device sci_device = { +static struct platform_device scif0_device = { .name = "sh-sci", - .id = -1, + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xfffe8800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 196, 196, 196, 196 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xfffe9000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 200, 200, 200, 200 }, +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xfffe9800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 204, 204, 204, 204 }, +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif3_platform_data, }, }; @@ -354,7 +380,10 @@ static struct platform_device rtc_device = { }; static struct platform_device *sh7203_devices[] __initdata = { - &sci_device, + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, &cmt0_device, &cmt1_device, &mtu2_0_device, @@ -375,6 +404,10 @@ void __init plat_irq_setup(void) } static struct platform_device *sh7203_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, &cmt0_device, &cmt1_device, &mtu2_0_device, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index a9ccc5e8d9e..064873585a8 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -133,37 +133,63 @@ static struct intc_mask_reg mask_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh7206", vectors, groups, mask_registers, prio_registers, NULL); -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xfffe8000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 240, 240, 240, 240 }, - }, { - .mapbase = 0xfffe8800, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 244, 244, 244, 244 }, - }, { - .mapbase = 0xfffe9000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 248, 248, 248, 248 }, - }, { - .mapbase = 0xfffe9800, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 252, 252, 252, 252 }, - }, { - .flags = 0, - } +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xfffe8000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 240, 240, 240, 240 }, }; -static struct platform_device sci_device = { +static struct platform_device scif0_device = { .name = "sh-sci", - .id = -1, + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xfffe8800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 244, 244, 244, 244 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xfffe9000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 248, 248, 248, 248 }, +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xfffe9800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 252, 252, 252, 252 }, +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif3_platform_data, }, }; @@ -325,7 +351,10 @@ static struct platform_device mtu2_2_device = { }; static struct platform_device *sh7206_devices[] __initdata = { - &sci_device, + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, &cmt0_device, &cmt1_device, &mtu2_0_device, @@ -346,6 +375,10 @@ void __init plat_irq_setup(void) } static struct platform_device *sh7206_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, &cmt0_device, &cmt1_device, &mtu2_0_device, -- cgit v1.2.3-70-g09d2 From 44658dfb660c4744b862571a3d8e1dae65e8b75a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 14 Dec 2009 12:30:05 +0000 Subject: sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720) This patch breaks out the sh3 scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/setup-sh7705.c | 49 ++++++++++++--------- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 80 ++++++++++++++++++++++++----------- arch/sh/kernel/cpu/sh3/setup-sh7710.c | 50 +++++++++++++--------- arch/sh/kernel/cpu/sh3/setup-sh7720.c | 50 +++++++++++++--------- 4 files changed, 142 insertions(+), 87 deletions(-) diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index c2310598387..7b892d60e3a 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -67,27 +67,33 @@ static struct intc_prio_reg prio_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, NULL, NULL, prio_registers, NULL); -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xa4410000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 56, 56, 56 }, - }, { - .mapbase = 0xa4400000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 52, 52, 52 }, - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xa4410000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 56, 56, 56 }, +}; + +static struct platform_device scif0_device = { .name = "sh-sci", - .id = -1, + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xa4400000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 52, 52 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif1_platform_data, }, }; @@ -210,10 +216,11 @@ static struct platform_device tmu2_device = { }; static struct platform_device *sh7705_devices[] __initdata = { + &scif0_device, + &scif1_device, &tmu0_device, &tmu1_device, &tmu2_device, - &sci_device, &rtc_device, }; @@ -225,6 +232,8 @@ static int __init sh7705_devices_setup(void) arch_initcall(sh7705_devices_setup); static struct platform_device *sh7705_early_devices[] __initdata = { + &scif0_device, + &scif1_device, &tmu0_device, &tmu1_device, &tmu2_device, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 347ab35d069..bc0c4f68c7c 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -106,44 +106,55 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xfffffe80, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, - .irqs = { 23, 23, 23, 0 }, +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xfffffe80, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 23, 23, 23, 0 }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, }, +}; #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) - { - .mapbase = 0xa4000150, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 56, 56, 56, 56 }, +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xa4000150, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 56, 56, 56, 56 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, }, +}; #endif #if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) - { - .mapbase = 0xa4000140, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_IRDA, - .irqs = { 52, 52, 52, 52 }, - }, -#endif - { - .flags = 0, - } +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xa4000140, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_IRDA, + .irqs = { 52, 52, 52, 52 }, }; -static struct platform_device sci_device = { +static struct platform_device scif2_device = { .name = "sh-sci", - .id = -1, + .id = 2, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif2_platform_data, }, }; +#endif static struct sh_timer_config tmu0_platform_data = { .name = "TMU0", @@ -238,10 +249,19 @@ static struct platform_device tmu2_device = { }; static struct platform_device *sh770x_devices[] __initdata = { + &scif0_device, +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + &scif1_device, +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + &scif2_device, +#endif &tmu0_device, &tmu1_device, &tmu2_device, - &sci_device, &rtc_device, }; @@ -253,6 +273,16 @@ static int __init sh770x_devices_setup(void) arch_initcall(sh770x_devices_setup); static struct platform_device *sh770x_early_devices[] __initdata = { + &scif0_device, +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + &scif1_device, +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + &scif2_device, +#endif &tmu0_device, &tmu1_device, &tmu2_device, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 717e90ae109..0845a3ad006 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -96,28 +96,33 @@ static struct platform_device rtc_device = { }, }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xa4400000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 52, 52, 52, 52 }, - }, { - .mapbase = 0xa4410000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 56, 56, 56, 56 }, - }, { - - .flags = 0, - } -}; - -static struct platform_device sci_device = { +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xa4400000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 52, 52, 52 }, +}; + +static struct platform_device scif0_device = { .name = "sh-sci", - .id = -1, + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xa4410000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 56, 56, 56, 56 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif1_platform_data, }, }; @@ -214,10 +219,11 @@ static struct platform_device tmu2_device = { }; static struct platform_device *sh7710_devices[] __initdata = { + &scif0_device, + &scif1_device, &tmu0_device, &tmu1_device, &tmu2_device, - &sci_device, &rtc_device, }; @@ -229,6 +235,8 @@ static int __init sh7710_devices_setup(void) arch_initcall(sh7710_devices_setup); static struct platform_device *sh7710_early_devices[] __initdata = { + &scif0_device, + &scif1_device, &tmu0_device, &tmu1_device, &tmu2_device, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 74d8baaf8e9..a718a623109 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -48,28 +48,33 @@ static struct platform_device rtc_device = { }, }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xa4430000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 80, 80, 80, 80 }, - }, { - .mapbase = 0xa4438000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 81, 81, 81, 81 }, - }, { - - .flags = 0, - } -}; - -static struct platform_device sci_device = { +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xa4430000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, +}; + +static struct platform_device scif0_device = { .name = "sh-sci", - .id = -1, + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xa4438000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif1_platform_data, }, }; @@ -369,6 +374,8 @@ static struct platform_device tmu2_device = { }; static struct platform_device *sh7720_devices[] __initdata = { + &scif0_device, + &scif1_device, &cmt0_device, &cmt1_device, &cmt2_device, @@ -378,7 +385,6 @@ static struct platform_device *sh7720_devices[] __initdata = { &tmu1_device, &tmu2_device, &rtc_device, - &sci_device, &usb_ohci_device, &usbf_device, }; @@ -391,6 +397,8 @@ static int __init sh7720_devices_setup(void) arch_initcall(sh7720_devices_setup); static struct platform_device *sh7720_early_devices[] __initdata = { + &scif0_device, + &scif1_device, &cmt0_device, &cmt1_device, &cmt2_device, -- cgit v1.2.3-70-g09d2 From cd5f107628ab89c5dec5ad923f1c27f4cba41972 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 14 Dec 2009 12:30:14 +0000 Subject: sh: sh4 scif pdata (sh7750/sh7760/sh4-202) This patch breaks out the sh4 scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. While at it, get rid of the R2D ifdef in the processor code and adjust the defconfigs to use ttySC1. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/configs/rts7751r2d1_defconfig | 2 +- arch/sh/configs/rts7751r2dplus_defconfig | 2 +- arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 23 ++++----- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 47 ++++++++++------- arch/sh/kernel/cpu/sh4/setup-sh7760.c | 89 ++++++++++++++++++++++---------- 5 files changed, 100 insertions(+), 63 deletions(-) diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index f521e82cc19..6f1126b3e48 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -324,7 +324,7 @@ CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set -CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial" +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1" # # Bus options diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index a156cd1e061..9215bbb13d6 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -324,7 +324,7 @@ CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set -CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial" +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1" # # Bus options diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c index de4827df19a..4b733715cdb 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c @@ -15,22 +15,18 @@ #include #include -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xffe80000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 40, 41, 43, 42 }, - }, { - .flags = 0, - } +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffe80000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, }; -static struct platform_device sci_device = { +static struct platform_device scif0_device = { .name = "sh-sci", - .id = -1, + .id = 0, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif0_platform_data, }, }; @@ -127,7 +123,7 @@ static struct platform_device tmu2_device = { }; static struct platform_device *sh4202_devices[] __initdata = { - &sci_device, + &scif0_device, &tmu0_device, &tmu1_device, &tmu2_device, @@ -141,6 +137,7 @@ static int __init sh4202_devices_setup(void) arch_initcall(sh4202_devices_setup); static struct platform_device *sh4202_early_devices[] __initdata = { + &scif0_device, &tmu0_device, &tmu1_device, &tmu2_device, diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 1b8b122e8f3..b2a9df1af64 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -35,29 +35,33 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; -static struct plat_sci_port sci_platform_data[] = { - { -#ifndef CONFIG_SH_RTS7751R2D - .mapbase = 0xffe00000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, - .irqs = { 23, 23, 23, 0 }, - }, { -#endif - .mapbase = 0xffe80000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 40, 40, 40, 40 }, - }, { - .flags = 0, - } +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 23, 23, 23, 0 }, }; -static struct platform_device sci_device = { +static struct platform_device scif0_device = { .name = "sh-sci", - .id = -1, + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xffe80000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 40, 40, 40 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif1_platform_data, }, }; @@ -221,8 +225,9 @@ static struct platform_device tmu4_device = { #endif static struct platform_device *sh7750_devices[] __initdata = { + &scif0_device, + &scif1_device, &rtc_device, - &sci_device, &tmu0_device, &tmu1_device, &tmu2_device, @@ -242,6 +247,8 @@ static int __init sh7750_devices_setup(void) arch_initcall(sh7750_devices_setup); static struct platform_device *sh7750_early_devices[] __initdata = { + &scif0_device, + &scif1_device, &tmu0_device, &tmu1_device, &tmu2_device, diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 7fbb7be9284..5b74cc0b43d 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -126,37 +126,63 @@ static struct intc_vect vectors_irq[] __initdata = { static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups, mask_registers, prio_registers, NULL); -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xfe600000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 52, 53, 55, 54 }, - }, { - .mapbase = 0xfe610000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 72, 73, 75, 74 }, - }, { - .mapbase = 0xfe620000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 76, 77, 79, 78 }, - }, { - .mapbase = 0xfe480000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, - .irqs = { 80, 81, 82, 0 }, - }, { - .flags = 0, - } +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xfe600000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 53, 55, 54 }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xfe610000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 72, 73, 75, 74 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xfe620000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 76, 77, 79, 78 }, +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xfe480000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 80, 81, 82, 0 }, }; -static struct platform_device sci_device = { +static struct platform_device scif3_device = { .name = "sh-sci", - .id = -1, + .id = 3, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif3_platform_data, }, }; @@ -254,7 +280,10 @@ static struct platform_device tmu2_device = { static struct platform_device *sh7760_devices[] __initdata = { - &sci_device, + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, &tmu0_device, &tmu1_device, &tmu2_device, @@ -268,6 +297,10 @@ static int __init sh7760_devices_setup(void) arch_initcall(sh7760_devices_setup); static struct platform_device *sh7760_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, &tmu0_device, &tmu1_device, &tmu2_device, -- cgit v1.2.3-70-g09d2 From bcac24d0535402d6e3414d3951609f12caaa1c7d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 14 Dec 2009 12:30:22 +0000 Subject: sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724) This patch breaks out the sh4a scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. Only sh4a SuperH Mobile processors are modified by this patch. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 112 +++++++++++++++-------- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 39 ++++---- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 91 +++++++++++-------- arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 160 ++++++++++++++++++++++----------- arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 149 ++++++++++++++++++++---------- 5 files changed, 358 insertions(+), 193 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index ac4d5672ec1..45eb1bfd42c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -15,6 +15,71 @@ #include #include +/* Serial */ +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + .clk = "scif0", +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, + .clk = "scif1", +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xffe20000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, + .clk = "scif2", +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xffe30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 83, 83, 83, 83 }, + .clk = "scif3", +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + static struct resource iic0_resources[] = { [0] = { .name = "IIC0", @@ -265,52 +330,17 @@ static struct platform_device tmu2_device = { .num_resources = ARRAY_SIZE(tmu2_resources), }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xffe00000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 80, 80, 80, 80 }, - .clk = "scif0", - }, { - .mapbase = 0xffe10000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 81, 81, 81, 81 }, - .clk = "scif1", - }, { - .mapbase = 0xffe20000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 82, 82, 82, 82 }, - .clk = "scif2", - }, { - .mapbase = 0xffe30000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 83, 83, 83, 83 }, - .clk = "scif3", - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - static struct platform_device *sh7343_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, &cmt_device, &tmu0_device, &tmu1_device, &tmu2_device, &iic0_device, &iic1_device, - &sci_device, &vpu_device, &veu_device, &jpu_device, @@ -328,6 +358,10 @@ static int __init sh7343_devices_setup(void) arch_initcall(sh7343_devices_setup); static struct platform_device *sh7343_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, &cmt_device, &tmu0_device, &tmu1_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 4a9010bf4fd..c494c193e3b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -18,6 +18,22 @@ #include #include +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + .clk = "scif0", +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + static struct resource iic_resources[] = { [0] = { .name = "IIC", @@ -276,33 +292,13 @@ static struct platform_device tmu2_device = { .num_resources = ARRAY_SIZE(tmu2_resources), }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xffe00000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 80, 80, 80, 80 }, - .clk = "scif0", - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - static struct platform_device *sh7366_devices[] __initdata = { + &scif0_device, &cmt_device, &tmu0_device, &tmu1_device, &tmu2_device, &iic_device, - &sci_device, &usb_host_device, &vpu_device, &veu0_device, @@ -321,6 +317,7 @@ static int __init sh7366_devices_setup(void) arch_initcall(sh7366_devices_setup); static struct platform_device *sh7366_early_devices[] __initdata = { + &scif0_device, &cmt_device, &tmu0_device, &tmu1_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 5491b094cf0..b5335b5e309 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -20,6 +20,55 @@ #include #include +/* Serial */ +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + .clk = "scif0", +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, + .clk = "scif1", +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xffe20000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, + .clk = "scif2", +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + static struct resource rtc_resources[] = { [0] = { .start = 0xa465fec0, @@ -339,41 +388,6 @@ static struct platform_device tmu2_device = { }, }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xffe00000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 80, 80, 80, 80 }, - .clk = "scif0", - }, - { - .mapbase = 0xffe10000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 81, 81, 81, 81 }, - .clk = "scif1", - }, - { - .mapbase = 0xffe20000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 82, 82, 82, 82 }, - .clk = "scif2", - }, - { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - static struct sh_dmae_pdata dma_platform_data = { .mode = 0, }; @@ -387,6 +401,9 @@ static struct platform_device dma_device = { }; static struct platform_device *sh7722_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, &cmt_device, &tmu0_device, &tmu1_device, @@ -394,7 +411,6 @@ static struct platform_device *sh7722_devices[] __initdata = { &rtc_device, &usbf_device, &iic_device, - &sci_device, &vpu_device, &veu_device, &jpu_device, @@ -413,6 +429,9 @@ static int __init sh7722_devices_setup(void) arch_initcall(sh7722_devices_setup); static struct platform_device *sh7722_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, &cmt_device, &tmu0_device, &tmu1_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 4caa5a7ca86..772b9265d0e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -20,6 +20,103 @@ #include #include +/* Serial */ +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + .clk = "scif0", +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, + .clk = "scif1", +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xffe20000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, + .clk = "scif2", +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xa4e30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { 56, 56, 56, 56 }, + .clk = "scif3", +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + +static struct plat_sci_port scif4_platform_data = { + .mapbase = 0xa4e40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { 88, 88, 88, 88 }, + .clk = "scif4", +}; + +static struct platform_device scif4_device = { + .name = "sh-sci", + .id = 4, + .dev = { + .platform_data = &scif4_platform_data, + }, +}; + +static struct plat_sci_port scif5_platform_data = { + .mapbase = 0xa4e50000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { 109, 109, 109, 109 }, + .clk = "scif5", +}; + +static struct platform_device scif5_device = { + .name = "sh-sci", + .id = 5, + .dev = { + .platform_data = &scif5_platform_data, + }, +}; + static struct uio_info vpu_platform_data = { .name = "VPU5", .version = "0", @@ -348,56 +445,6 @@ static struct platform_device tmu5_device = { }, }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xffe00000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 80, 80, 80, 80 }, - .clk = "scif0", - },{ - .mapbase = 0xffe10000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 81, 81, 81, 81 }, - .clk = "scif1", - },{ - .mapbase = 0xffe20000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 82, 82, 82, 82 }, - .clk = "scif2", - },{ - .mapbase = 0xa4e30000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIFA, - .irqs = { 56, 56, 56, 56 }, - .clk = "scif3", - },{ - .mapbase = 0xa4e40000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIFA, - .irqs = { 88, 88, 88, 88 }, - .clk = "scif4", - },{ - .mapbase = 0xa4e50000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIFA, - .irqs = { 109, 109, 109, 109 }, - .clk = "scif5", - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - static struct resource rtc_resources[] = { [0] = { .start = 0xa465fec0, @@ -488,6 +535,12 @@ static struct platform_device iic_device = { }; static struct platform_device *sh7723_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, &cmt_device, &tmu0_device, &tmu1_device, @@ -495,7 +548,6 @@ static struct platform_device *sh7723_devices[] __initdata = { &tmu3_device, &tmu4_device, &tmu5_device, - &sci_device, &rtc_device, &iic_device, &sh7723_usb_host_device, @@ -516,6 +568,12 @@ static int __init sh7723_devices_setup(void) arch_initcall(sh7723_devices_setup); static struct platform_device *sh7723_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, &cmt_device, &tmu0_device, &tmu1_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 845e89c936e..a52f35117e8 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -27,53 +27,99 @@ #include /* Serial */ -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xffe00000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 80, 80, 80, 80 }, - .clk = "scif0", - }, { - .mapbase = 0xffe10000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 81, 81, 81, 81 }, - .clk = "scif1", - }, { - .mapbase = 0xffe20000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 82, 82, 82, 82 }, - .clk = "scif2", - }, { - .mapbase = 0xa4e30000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIFA, - .irqs = { 56, 56, 56, 56 }, - .clk = "scif3", - }, { - .mapbase = 0xa4e40000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIFA, - .irqs = { 88, 88, 88, 88 }, - .clk = "scif4", - }, { - .mapbase = 0xa4e50000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIFA, - .irqs = { 109, 109, 109, 109 }, - .clk = "scif5", - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + .clk = "scif0", +}; + +static struct platform_device scif0_device = { .name = "sh-sci", - .id = -1, + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, + .clk = "scif1", +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xffe20000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, + .clk = "scif2", +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xa4e30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { 56, 56, 56, 56 }, + .clk = "scif3", +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + +static struct plat_sci_port scif4_platform_data = { + .mapbase = 0xa4e40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { 88, 88, 88, 88 }, + .clk = "scif4", +}; + +static struct platform_device scif4_device = { + .name = "sh-sci", + .id = 4, + .dev = { + .platform_data = &scif4_platform_data, + }, +}; + +static struct plat_sci_port scif5_platform_data = { + .mapbase = 0xa4e50000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { 109, 109, 109, 109 }, + .clk = "scif5", +}; + +static struct platform_device scif5_device = { + .name = "sh-sci", + .id = 5, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif5_platform_data, }, }; @@ -590,6 +636,12 @@ static struct platform_device spu1_device = { }; static struct platform_device *sh7724_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, &cmt_device, &tmu0_device, &tmu1_device, @@ -597,7 +649,6 @@ static struct platform_device *sh7724_devices[] __initdata = { &tmu3_device, &tmu4_device, &tmu5_device, - &sci_device, &rtc_device, &iic0_device, &iic1_device, @@ -624,6 +675,12 @@ static int __init sh7724_devices_setup(void) arch_initcall(sh7724_devices_setup); static struct platform_device *sh7724_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, &cmt_device, &tmu0_device, &tmu1_device, -- cgit v1.2.3-70-g09d2 From a9571d7b045eb3b38d856c6dfda1798fb67ca44c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 14 Dec 2009 12:30:31 +0000 Subject: sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3) This patch breaks out the sh4a scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. All sh4a except SuperH Mobile processors are modified by this patch. While at it, sh7757 gets early platform device support. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 92 +++++++++----- arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 81 +++++++----- arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 221 ++++++++++++++++++++++++--------- arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 60 +++++---- arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 159 ++++++++++++++++-------- arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 132 ++++++++++++++------ arch/sh/kernel/cpu/sh4a/setup-shx3.c | 76 +++++++----- 7 files changed, 551 insertions(+), 270 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index c470e15f2e0..37e32efbbaa 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -17,6 +17,51 @@ #include #include +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xfe4b0000, /* SCIF2 */ + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 40, 40, 40 }, +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xfe4c0000, /* SCIF3 */ + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 76, 76, 76, 76 }, +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + +static struct plat_sci_port scif4_platform_data = { + .mapbase = 0xfe4d0000, /* SCIF4 */ + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 104, 104, 104, 104 }, +}; + +static struct platform_device scif4_device = { + .name = "sh-sci", + .id = 4, + .dev = { + .platform_data = &scif4_platform_data, + }, +}; + static struct sh_timer_config tmu0_platform_data = { .name = "TMU0", .channel_offset = 0x04, @@ -79,39 +124,12 @@ static struct platform_device tmu1_device = { .num_resources = ARRAY_SIZE(tmu1_resources), }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xfe4b0000, /* SCIF2 */ - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 40, 40, 40, 40 }, - }, { - .mapbase = 0xfe4c0000, /* SCIF3 */ - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 76, 76, 76, 76 }, - }, { - .mapbase = 0xfe4d0000, /* SCIF4 */ - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 104, 104, 104, 104 }, - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - static struct platform_device *sh7757_devices[] __initdata = { + &scif2_device, + &scif3_device, + &scif4_device, &tmu0_device, &tmu1_device, - &sci_device, }; static int __init sh7757_devices_setup(void) @@ -121,6 +139,20 @@ static int __init sh7757_devices_setup(void) } arch_initcall(sh7757_devices_setup); +static struct platform_device *sh7757_early_devices[] __initdata = { + &scif2_device, + &scif3_device, + &scif4_device, + &tmu0_device, + &tmu1_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7757_early_devices, + ARRAY_SIZE(sh7757_early_devices)); +} + enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index 4659fff6b84..6aba26fec41 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -16,6 +16,51 @@ #include #include +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 40, 40, 40 }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xffe08000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 76, 76, 76, 76 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 104, 104, 104, 104 }, +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + static struct resource rtc_resources[] = { [0] = { .start = 0xffe80000, @@ -36,35 +81,6 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xffe00000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 40, 40, 40, 40 }, - }, { - .mapbase = 0xffe08000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 76, 76, 76, 76 }, - }, { - .mapbase = 0xffe10000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 104, 104, 104, 104 }, - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - static struct resource usb_ohci_resources[] = { [0] = { .start = 0xffec8000, @@ -297,6 +313,9 @@ static struct platform_device tmu5_device = { }; static struct platform_device *sh7763_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, &tmu0_device, &tmu1_device, &tmu2_device, @@ -304,7 +323,6 @@ static struct platform_device *sh7763_devices[] __initdata = { &tmu4_device, &tmu5_device, &rtc_device, - &sci_device, &usb_ohci_device, &usbf_device, }; @@ -317,6 +335,9 @@ static int __init sh7763_devices_setup(void) arch_initcall(sh7763_devices_setup); static struct platform_device *sh7763_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, &tmu0_device, &tmu1_device, &tmu2_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index eead08d89d3..c1643bc9590 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -14,67 +14,153 @@ #include #include -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xff923000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 61, 61, 61, 61 }, - }, { - .mapbase = 0xff924000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 62, 62, 62, 62 }, - }, { - .mapbase = 0xff925000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 63, 63, 63, 63 }, - }, { - .mapbase = 0xff926000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 64, 64, 64, 64 }, - }, { - .mapbase = 0xff927000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 65, 65, 65, 65 }, - }, { - .mapbase = 0xff928000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 66, 66, 66, 66 }, - }, { - .mapbase = 0xff929000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 67, 67, 67, 67 }, - }, { - .mapbase = 0xff92a000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 68, 68, 68, 68 }, - }, { - .mapbase = 0xff92b000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 69, 69, 69, 69 }, - }, { - .mapbase = 0xff92c000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 70, 70, 70, 70 }, - }, { - .flags = 0, - } +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xff923000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 61, 61, 61, 61 }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xff924000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 62, 62, 62, 62 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xff925000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 63, 63, 63, 63 }, +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xff926000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 64, 64, 64, 64 }, +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + +static struct plat_sci_port scif4_platform_data = { + .mapbase = 0xff927000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 65, 65, 65, 65 }, +}; + +static struct platform_device scif4_device = { + .name = "sh-sci", + .id = 4, + .dev = { + .platform_data = &scif4_platform_data, + }, +}; + +static struct plat_sci_port scif5_platform_data = { + .mapbase = 0xff928000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 66, 66, 66, 66 }, +}; + +static struct platform_device scif5_device = { + .name = "sh-sci", + .id = 5, + .dev = { + .platform_data = &scif5_platform_data, + }, +}; + +static struct plat_sci_port scif6_platform_data = { + .mapbase = 0xff929000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 67, 67, 67, 67 }, +}; + +static struct platform_device scif6_device = { + .name = "sh-sci", + .id = 6, + .dev = { + .platform_data = &scif6_platform_data, + }, +}; + +static struct plat_sci_port scif7_platform_data = { + .mapbase = 0xff92a000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 68, 68, 68, 68 }, +}; + +static struct platform_device scif7_device = { + .name = "sh-sci", + .id = 7, + .dev = { + .platform_data = &scif7_platform_data, + }, +}; + +static struct plat_sci_port scif8_platform_data = { + .mapbase = 0xff92b000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 69, 69, 69, 69 }, +}; + +static struct platform_device scif8_device = { + .name = "sh-sci", + .id = 8, + .dev = { + .platform_data = &scif8_platform_data, + }, +}; + +static struct plat_sci_port scif9_platform_data = { + .mapbase = 0xff92c000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 70, 70, 70, 70 }, }; -static struct platform_device sci_device = { +static struct platform_device scif9_device = { .name = "sh-sci", - .id = -1, + .id = 9, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif9_platform_data, }, }; @@ -351,6 +437,16 @@ static struct platform_device tmu8_device = { }; static struct platform_device *sh7770_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, + &scif6_device, + &scif7_device, + &scif8_device, + &scif9_device, &tmu0_device, &tmu1_device, &tmu2_device, @@ -360,7 +456,6 @@ static struct platform_device *sh7770_devices[] __initdata = { &tmu6_device, &tmu7_device, &tmu8_device, - &sci_device, }; static int __init sh7770_devices_setup(void) @@ -371,6 +466,16 @@ static int __init sh7770_devices_setup(void) arch_initcall(sh7770_devices_setup); static struct platform_device *sh7770_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, + &scif6_device, + &scif7_device, + &scif8_device, + &scif9_device, &tmu0_device, &tmu1_device, &tmu2_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 12ff56f19c5..c310558490d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -15,6 +15,36 @@ #include #include +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 40, 40, 40 }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 76, 76, 76, 76 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + static struct sh_timer_config tmu0_platform_data = { .name = "TMU0", .channel_offset = 0x04, @@ -217,30 +247,6 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xffe00000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 40, 40, 40, 40 }, - }, { - .mapbase = 0xffe10000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 76, 76, 76, 76 }, - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - static struct sh_dmae_pdata dma_platform_data = { .mode = (SHDMA_MIX_IRQ | SHDMA_DMAOR1), }; @@ -254,6 +260,8 @@ static struct platform_device dma_device = { }; static struct platform_device *sh7780_devices[] __initdata = { + &scif0_device, + &scif1_device, &tmu0_device, &tmu1_device, &tmu2_device, @@ -261,7 +269,6 @@ static struct platform_device *sh7780_devices[] __initdata = { &tmu4_device, &tmu5_device, &rtc_device, - &sci_device, &dma_device, }; @@ -271,8 +278,9 @@ static int __init sh7780_devices_setup(void) ARRAY_SIZE(sh7780_devices)); } arch_initcall(sh7780_devices_setup); - static struct platform_device *sh7780_early_devices[] __initdata = { + &scif0_device, + &scif1_device, &tmu0_device, &tmu1_device, &tmu2_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 7f6c718b6c3..ef26ebda6e8 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -16,6 +16,102 @@ #include #include +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffea0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 40, 40, 40 }, + .clk = "scif_fck", +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xffeb0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 44, 44, 44, 44 }, + .clk = "scif_fck", +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xffec0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 60, 60, 60, 60 }, + .clk = "scif_fck", +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xffed0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 61, 61, 61, 61 }, + .clk = "scif_fck", +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + +static struct plat_sci_port scif4_platform_data = { + .mapbase = 0xffee0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 62, 62, 62, 62 }, + .clk = "scif_fck", +}; + +static struct platform_device scif4_device = { + .name = "sh-sci", + .id = 4, + .dev = { + .platform_data = &scif4_platform_data, + }, +}; + +static struct plat_sci_port scif5_platform_data = { + .mapbase = 0xffef0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 63, 63, 63, 63 }, + .clk = "scif_fck", +}; + +static struct platform_device scif5_device = { + .name = "sh-sci", + .id = 5, + .dev = { + .platform_data = &scif5_platform_data, + }, +}; + static struct sh_timer_config tmu0_platform_data = { .name = "TMU0", .channel_offset = 0x04, @@ -198,64 +294,19 @@ static struct platform_device tmu5_device = { .num_resources = ARRAY_SIZE(tmu5_resources), }; -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xffea0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 40, 40, 40, 40 }, - .clk = "scif_fck", - }, { - .mapbase = 0xffeb0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 44, 44, 44, 44 }, - .clk = "scif_fck", - }, { - .mapbase = 0xffec0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 60, 60, 60, 60 }, - .clk = "scif_fck", - }, { - .mapbase = 0xffed0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 61, 61, 61, 61 }, - .clk = "scif_fck", - }, { - .mapbase = 0xffee0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 62, 62, 62, 62 }, - .clk = "scif_fck", - }, { - .mapbase = 0xffef0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 63, 63, 63, 63 }, - .clk = "scif_fck", - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - static struct platform_device *sh7785_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, &tmu0_device, &tmu1_device, &tmu2_device, &tmu3_device, &tmu4_device, &tmu5_device, - &sci_device, }; static int __init sh7785_devices_setup(void) @@ -266,6 +317,12 @@ static int __init sh7785_devices_setup(void) arch_initcall(sh7785_devices_setup); static struct platform_device *sh7785_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, &tmu0_device, &tmu1_device, &tmu2_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index 0104a8ec536..71673487ace 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -23,51 +23,96 @@ #include #include -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xffea0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 40, 41, 43, 42 }, +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffea0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, }, - /* - * The rest of these all have multiplexed IRQs - */ - { - .mapbase = 0xffeb0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 44, 44, 44, 44 }, - }, { - .mapbase = 0xffec0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 50, 50, 50, 50 }, - }, { - .mapbase = 0xffed0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 51, 51, 51, 51 }, - }, { - .mapbase = 0xffee0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 52, 52, 52, 52 }, - }, { - .mapbase = 0xffef0000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 53, 53, 53, 53 }, - }, { - .flags = 0, - } }; -static struct platform_device sci_device = { +/* + * The rest of these all have multiplexed IRQs + */ +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xffeb0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 44, 44, 44, 44 }, +}; + +static struct platform_device scif1_device = { .name = "sh-sci", - .id = -1, + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xffec0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 50, 50, 50, 50 }, +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xffed0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 51, 51, 51, 51 }, +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + +static struct plat_sci_port scif4_platform_data = { + .mapbase = 0xffee0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 52, 52, 52 }, +}; + +static struct platform_device scif4_device = { + .name = "sh-sci", + .id = 4, + .dev = { + .platform_data = &scif4_platform_data, + }, +}; + +static struct plat_sci_port scif5_platform_data = { + .mapbase = 0xffef0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 53, 53, 53, 53 }, +}; + +static struct platform_device scif5_device = { + .name = "sh-sci", + .id = 5, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif5_platform_data, }, }; @@ -459,6 +504,12 @@ static struct platform_device usb_ohci_device = { }; static struct platform_device *sh7786_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, &tmu0_device, &tmu1_device, &tmu2_device, @@ -474,7 +525,6 @@ static struct platform_device *sh7786_early_devices[] __initdata = { }; static struct platform_device *sh7786_devices[] __initdata = { - &sci_device, &usb_ohci_device, }; diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index c7ba9166e18..780ba17a559 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -24,32 +24,48 @@ * silicon in the first place, we just refuse to deal with the port at * all rather than adding infrastructure to hack around it. */ -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xffc30000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 40, 41, 43, 42 }, - }, { - .mapbase = 0xffc40000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 44, 45, 47, 46 }, - }, { - .mapbase = 0xffc60000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 52, 53, 55, 54 }, - }, { - .flags = 0, - } +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xffc30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xffc40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 44, 45, 47, 46 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xffc60000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 53, 55, 54 }, }; -static struct platform_device sci_device = { +static struct platform_device scif2_device = { .name = "sh-sci", - .id = -1, + .id = 2, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif2_platform_data, }, }; @@ -236,6 +252,9 @@ static struct platform_device tmu5_device = { }; static struct platform_device *shx3_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, &tmu0_device, &tmu1_device, &tmu2_device, @@ -244,21 +263,10 @@ static struct platform_device *shx3_early_devices[] __initdata = { &tmu5_device, }; -static struct platform_device *shx3_devices[] __initdata = { - &sci_device, -}; - static int __init shx3_devices_setup(void) { - int ret; - - ret = platform_add_devices(shx3_early_devices, + return platform_add_devices(shx3_early_devices, ARRAY_SIZE(shx3_early_devices)); - if (unlikely(ret != 0)) - return ret; - - return platform_add_devices(shx3_devices, - ARRAY_SIZE(shx3_devices)); } arch_initcall(shx3_devices_setup); -- cgit v1.2.3-70-g09d2 From d8d3fbb0248dd0bc9b961f9ccfad8aa8e6b3ccfe Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 14 Dec 2009 12:30:41 +0000 Subject: sh: sh5 scif pdata (sh5-101/sh5-103) This patch breaks out the sh5 scif serial port platform data from a shared platform device to one platform device per port. Also, move the serial port to the list of early platform devices. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh5/setup-sh5.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c index 6a0f82f7003..e7a3c1e4b60 100644 --- a/arch/sh/kernel/cpu/sh5/setup-sh5.c +++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c @@ -16,22 +16,18 @@ #include #include -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = PHYS_PERIPHERAL_BLOCK + 0x01030000, - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .type = PORT_SCIF, - .irqs = { 39, 40, 42, 0 }, - }, { - .flags = 0, - } +static struct plat_sci_port scif0_platform_data = { + .mapbase = PHYS_PERIPHERAL_BLOCK + 0x01030000, + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, + .type = PORT_SCIF, + .irqs = { 39, 40, 42, 0 }, }; -static struct platform_device sci_device = { +static struct platform_device scif0_device = { .name = "sh-sci", - .id = -1, + .id = 0, .dev = { - .platform_data = sci_platform_data, + .platform_data = &scif0_platform_data, }, }; @@ -164,13 +160,13 @@ static struct platform_device tmu2_device = { }; static struct platform_device *sh5_early_devices[] __initdata = { + &scif0_device, &tmu0_device, &tmu1_device, &tmu2_device, }; static struct platform_device *sh5_devices[] __initdata = { - &sci_device, &rtc_device, }; -- cgit v1.2.3-70-g09d2 From e76fe57447e88916954bdcab1c0d2c708ec3c943 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 14 Dec 2009 12:52:53 +0000 Subject: sh: Remove old early serial console code V2 Now when the sh-sci driver can do early serial output, get rid of the old duplicated code. This patch is V2 and removes support for "earlyprintk=serial" together with the following kconfig options: CONFIG_EARLY_SCIF_CONSOLE CONFIG_EARLY_SCIF_CONSOLE_PORT CONFIG_EARLY_PRINTK With this patch applied "earlyprintk=" support is always built-in the SuperH kernel. For this to work the serial driver must have early platform support and in the case of sh-sci the serial console needs to be enabled: CONFIG_SERIAL_SH_SCI_CONSOLE=y So after enabling the SuperH SCI console kconfig option you also need to point out port using the kernel command line: "earlyprintk=sh-sci.N[,baudrate][,keep]" Remember that clocks may be disabled by the boot loader so you may have to do some board specific static clock setup before earlyprintk will work on your platform. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/Kconfig.debug | 44 ------------- arch/sh/kernel/Makefile | 3 +- arch/sh/kernel/early_printk.c | 147 ------------------------------------------ 3 files changed, 1 insertion(+), 193 deletions(-) diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 55907af1dc2..12fec72fec5 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -19,50 +19,6 @@ config SH_STANDARD_BIOS mask ROM and no flash (WindowsCE machines fall in this category). If unsure, say N. -config EARLY_SCIF_CONSOLE - bool "Use early SCIF console" - help - This enables an early console using a fixed SCIF port. This can - be used by platforms that are either not running the SH - standard BIOS, or do not wish to use the BIOS callbacks for the - serial I/O. - -config EARLY_SCIF_CONSOLE_PORT - hex - depends on EARLY_SCIF_CONSOLE - default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705 - default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721 - default "0xf8420000" if CPU_SUBTYPE_SH7619 - default "0xff804000" if CPU_SUBTYPE_MXG - default "0xffc30000" if CPU_SUBTYPE_SHX3 - default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \ - CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \ - CPU_SUBTYPE_SH7343 - default "0xfe4c0000" if CPU_SUBTYPE_SH7757 - default "0xffeb0000" if CPU_SUBTYPE_SH7785 - default "0xffeb0000" if CPU_SUBTYPE_SH7786 - default "0xfffe8000" if CPU_SUBTYPE_SH7203 - default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 - default "0xffe80000" if CPU_SH4 - default "0xa4000150" if CPU_SH3 - default "0x00000000" - -config EARLY_PRINTK - bool "Early printk support" - depends on SH_STANDARD_BIOS || EARLY_SCIF_CONSOLE - help - Say Y here to redirect kernel printk messages to the serial port - used by the SH-IPL bootloader, starting very early in the boot - process and ending when the kernel's serial console is initialised. - This option is only useful porting the kernel to a new machine, - when the kernel may crash or hang before the serial console is - initialised. If unsure, say N. - - On devices that are running SH-IPL and want to keep the port - initialization consistent while not using the BIOS callbacks, - select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using - the kernel command line option to toggle back and forth. - config STACK_DEBUG bool "Check for stack overflows" depends on DEBUG_KERNEL && SUPERH32 diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 0471a3eb25e..0d587da1ef1 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -22,11 +22,10 @@ obj-y := debugtraps.o dma-nommu.o dumpstack.o \ obj-y += cpu/ obj-$(CONFIG_VSYSCALL) += vsyscall/ obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o +obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o early_printk.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o obj-$(CONFIG_MODULES) += sh_ksyms_$(BITS).o module.o -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_STACKTRACE) += stacktrace.o diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index fe7dc3fe1db..f8bb50c6e05 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -15,7 +15,6 @@ #include #include -#ifdef CONFIG_SH_STANDARD_BIOS #include /* @@ -57,140 +56,7 @@ static struct console bios_console = { .flags = CON_PRINTBUFFER, .index = -1, }; -#endif -#ifdef CONFIG_EARLY_SCIF_CONSOLE -#include -#include "../../../drivers/serial/sh-sci.h" - -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define EPK_SCSMR_VALUE 0x000 -#define EPK_SCBRR_VALUE 0x00C -#define EPK_FIFO_SIZE 64 -#define EPK_FIFO_BITS (0x7f00 >> 8) -#else -#define EPK_FIFO_SIZE 16 -#define EPK_FIFO_BITS (0x1f00 >> 8) -#endif - -static struct uart_port scif_port = { - .type = PORT_SCIF, - .mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT, - .membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT, -}; - -static void scif_sercon_putc(int c) -{ - while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE)) - ; - - sci_in(&scif_port, SCxSR); - sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40)); - sci_out(&scif_port, SCxTDR, c); - - while ((sci_in(&scif_port, SCxSR) & 0x40) == 0) - ; - - if (c == '\n') - scif_sercon_putc('\r'); -} - -static void scif_sercon_write(struct console *con, const char *s, - unsigned count) -{ - while (count-- > 0) - scif_sercon_putc(*s++); -} - -static int __init scif_sercon_setup(struct console *con, char *options) -{ - con->cflag = CREAD | HUPCL | CLOCAL | B115200 | CS8; - - return 0; -} - -static struct console scif_console = { - .name = "sercon", - .write = scif_sercon_write, - .setup = scif_sercon_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -#if !defined(CONFIG_SH_STANDARD_BIOS) -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -static void scif_sercon_init(char *s) -{ - sci_out(&scif_port, SCSCR, 0x0000); /* clear TE and RE */ - sci_out(&scif_port, SCFCR, 0x4006); /* reset */ - sci_out(&scif_port, SCSCR, 0x0000); /* select internal clock */ - sci_out(&scif_port, SCSMR, EPK_SCSMR_VALUE); - sci_out(&scif_port, SCBRR, EPK_SCBRR_VALUE); - - mdelay(1); /* wait 1-bit time */ - - sci_out(&scif_port, SCFCR, 0x0030); /* TTRG=b'11 */ - sci_out(&scif_port, SCSCR, 0x0030); /* TE, RE */ -} -#elif defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3) -#define DEFAULT_BAUD 115200 -/* - * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4 - * devices that aren't using sh-ipl+g. - */ -static void scif_sercon_init(char *s) -{ - struct uart_port *port = &scif_port; - unsigned baud = DEFAULT_BAUD; - unsigned int status; - char *e; - - if (*s == ',') - ++s; - - if (*s) { - /* ignore ioport/device name */ - s += strcspn(s, ","); - if (*s == ',') - s++; - } - - if (*s) { - baud = simple_strtoul(s, &e, 0); - if (baud == 0 || s == e) - baud = DEFAULT_BAUD; - } - - do { - status = sci_in(port, SCxSR); - } while (!(status & SCxSR_TEND(port))); - - sci_out(port, SCSCR, 0); /* TE=0, RE=0 */ - sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); - sci_out(port, SCSMR, 0); - - /* Set baud rate */ - sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) / - (32 * baud) - 1); - udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ - - sci_out(port, SCSPTR, 0); - sci_out(port, SCxSR, 0x60); - sci_out(port, SCLSR, 0); - - sci_out(port, SCFCR, 0); - sci_out(port, SCSCR, 0x30); /* TE=1, RE=1 */ -} -#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */ -#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */ -#endif /* CONFIG_EARLY_SCIF_CONSOLE */ - -/* - * Setup a default console, if more than one is compiled in, rely on the - * earlyprintk= parsing to give priority. - */ static struct console *early_console; static int __init setup_early_printk(char *buf) @@ -203,21 +69,8 @@ static int __init setup_early_printk(char *buf) if (strstr(buf, "keep")) keep_early = 1; -#ifdef CONFIG_SH_STANDARD_BIOS if (!strncmp(buf, "bios", 4)) early_console = &bios_console; -#endif -#if defined(CONFIG_EARLY_SCIF_CONSOLE) - if (!strncmp(buf, "serial", 6)) { - early_console = &scif_console; - -#if !defined(CONFIG_SH_STANDARD_BIOS) -#if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3) - scif_sercon_init(buf + 6); -#endif -#endif - } -#endif if (likely(early_console)) { if (keep_early) -- cgit v1.2.3-70-g09d2 From 61cc7b0a172b047aa6d2c3e8b62bb1590f37e897 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Mon, 14 Dec 2009 20:12:04 +0000 Subject: sh: Fix up FPU build for SH5 After the recent FPU optimisation commit the signature of save_fpu() changed. "regs" wasn't used in the implementation of save_fpu() anyway. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh5/fpu.c | 4 ++-- arch/sh/kernel/process_64.c | 4 ++-- arch/sh/kernel/ptrace_64.c | 4 ++-- arch/sh/kernel/signal_64.c | 2 +- arch/sh/kernel/traps_64.c | 4 ++-- 5 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c index dd4f51ffb50..4648ccee6c4 100644 --- a/arch/sh/kernel/cpu/sh5/fpu.c +++ b/arch/sh/kernel/cpu/sh5/fpu.c @@ -34,7 +34,7 @@ static union sh_fpu_union init_fpuregs = { } }; -void save_fpu(struct task_struct *tsk, struct pt_regs *regs) +void save_fpu(struct task_struct *tsk) { asm volatile("fst.p %0, (0*8), fp0\n\t" "fst.p %0, (1*8), fp2\n\t" @@ -153,7 +153,7 @@ do_fpu_state_restore(unsigned long ex, struct pt_regs *regs) enable_fpu(); if (last_task_used_math != NULL) /* Other processes fpu state, save away */ - save_fpu(last_task_used_math, regs); + save_fpu(last_task_used_math); last_task_used_math = current; if (used_math()) { diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 359b8a2f4d2..31f80c61b03 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -404,7 +404,7 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) if (fpvalid) { if (current == last_task_used_math) { enable_fpu(); - save_fpu(tsk, regs); + save_fpu(tsk); disable_fpu(); last_task_used_math = 0; regs->sr |= SR_FD; @@ -431,7 +431,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, #ifdef CONFIG_SH_FPU if(last_task_used_math == current) { enable_fpu(); - save_fpu(current, regs); + save_fpu(current); disable_fpu(); last_task_used_math = NULL; regs->sr |= SR_FD; diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 952da83903d..873ebdc4f98 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -82,7 +82,7 @@ get_fpu_long(struct task_struct *task, unsigned long addr) if (last_task_used_math == task) { enable_fpu(); - save_fpu(task, regs); + save_fpu(task); disable_fpu(); last_task_used_math = 0; regs->sr |= SR_FD; @@ -118,7 +118,7 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) set_stopped_child_used_math(task); } else if (last_task_used_math == task) { enable_fpu(); - save_fpu(task, regs); + save_fpu(task); disable_fpu(); last_task_used_math = 0; regs->sr |= SR_FD; diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index feb3dddd319..ce76dbdef29 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -314,7 +314,7 @@ setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) if (current == last_task_used_math) { enable_fpu(); - save_fpu(current, regs); + save_fpu(current); disable_fpu(); last_task_used_math = NULL; regs->sr |= SR_FD; diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c index 75c0cbe2eda..d86f5315a0c 100644 --- a/arch/sh/kernel/traps_64.c +++ b/arch/sh/kernel/traps_64.c @@ -600,7 +600,7 @@ static int misaligned_fpu_load(struct pt_regs *regs, indexed by register number. */ if (last_task_used_math == current) { enable_fpu(); - save_fpu(current, regs); + save_fpu(current); disable_fpu(); last_task_used_math = NULL; regs->sr |= SR_FD; @@ -673,7 +673,7 @@ static int misaligned_fpu_store(struct pt_regs *regs, indexed by register number. */ if (last_task_used_math == current) { enable_fpu(); - save_fpu(current, regs); + save_fpu(current); disable_fpu(); last_task_used_math = NULL; regs->sr |= SR_FD; -- cgit v1.2.3-70-g09d2 From 9f815a1765b0ce766ab1d26ef192d30410f70b2b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 15 Dec 2009 00:27:57 +0000 Subject: sh: ms7724se: Add ak4642 support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 4b0f0c0dc2b..5d0f70b46c9 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -514,6 +514,13 @@ static struct platform_device *ms7724se_devices[] __initdata = { &sdhi1_cn8_device, }; +/* I2C device */ +static struct i2c_board_info i2c0_devices[] = { + { + I2C_BOARD_INFO("ak4642", 0x12), + }, +}; + #define EEPROM_OP 0xBA206000 #define EEPROM_ADR 0xBA206004 #define EEPROM_DATA 0xBA20600C @@ -575,6 +582,16 @@ extern char ms7724se_sdram_enter_end; extern char ms7724se_sdram_leave_start; extern char ms7724se_sdram_leave_end; + +static int __init arch_setup(void) +{ + /* enable I2C device */ + i2c_register_board_info(0, i2c0_devices, + ARRAY_SIZE(i2c0_devices)); + return 0; +} +arch_initcall(arch_setup); + static int __init devices_setup(void) { u16 sw = ctrl_inw(SW4140); /* select camera, monitor */ -- cgit v1.2.3-70-g09d2 From 1ce4da7a502ea637748bc55460fc43eb2acc4f01 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 7 Dec 2009 14:05:45 +0000 Subject: sh: MSIOF/mmc_spi platform data for the Ecovec24 board This patch adds MSIOF and mmc_spi platform data for the CN11 port on the SuperH Ecovec24 board. No card detect interrupt is available so the MMC code is configured to poll. The WP signal is implemented together with CD and power control. The board only supports 3.3V power. The platform data is wrapped in SDHI #ifdefs to allow both the SDHI and the MSIOF to coexist. Only one configuration is allowed at a time. The pin routing is selected by a dip switch but we can unfortunately not detect this setting at run time. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 97 +++++++++++++++++++++++++++++++++++- 1 file changed, 95 insertions(+), 2 deletions(-) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 826e62326d5..cfd958c613d 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -19,6 +19,10 @@ #include #include #include +#include +#include +#include +#include #include #include #include @@ -421,6 +425,7 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; +#ifdef CONFIG_MFD_SH_MOBILE_SDHI /* SHDI0 */ static void sdhi0_set_pwr(struct platform_device *pdev, int state) { @@ -493,6 +498,73 @@ static struct platform_device sdhi1_device = { }, }; +#else + +static int mmc_spi_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_PTY6); +} + +static int mmc_spi_get_cd(struct device *dev) +{ + return !gpio_get_value(GPIO_PTY7); +} + +static void mmc_spi_setpower(struct device *dev, unsigned int maskval) +{ + gpio_set_value(GPIO_PTB6, maskval ? 1 : 0); +} + +static struct mmc_spi_platform_data mmc_spi_info = { + .get_ro = mmc_spi_get_ro, + .get_cd = mmc_spi_get_cd, + .caps = MMC_CAP_NEEDS_POLL, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */ + .setpower = mmc_spi_setpower, +}; + +static struct spi_board_info spi_bus[] = { + { + .modalias = "mmc_spi", + .platform_data = &mmc_spi_info, + .max_speed_hz = 5000000, + .mode = SPI_MODE_0, + .controller_data = (void *) GPIO_PTM4, + }, +}; + +static struct sh_msiof_spi_info msiof0_data = { + .num_chipselect = 1, +}; + +static struct resource msiof0_resources[] = { + [0] = { + .name = "MSIOF0", + .start = 0xa4c40000, + .end = 0xa4c40063, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 84, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device msiof0_device = { + .name = "spi_sh_msiof", + .id = 0, /* MSIOF0 */ + .dev = { + .platform_data = &msiof0_data, + }, + .num_resources = ARRAY_SIZE(msiof0_resources), + .resource = msiof0_resources, + .archdata = { + .hwblk_id = HWBLK_MSIOF0, + }, +}; + +#endif + static struct platform_device *ecovec_devices[] __initdata = { &heartbeat_device, &nor_flash_device, @@ -503,8 +575,12 @@ static struct platform_device *ecovec_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, +#ifdef CONFIG_MFD_SH_MOBILE_SDHI &sdhi0_device, &sdhi1_device, +#else + &msiof0_device, +#endif }; #define EEPROM_ADDR 0x50 @@ -773,7 +849,8 @@ static int __init arch_setup(void) gpio_direction_input(GPIO_PTR5); gpio_direction_input(GPIO_PTR6); - /* enable SDHI0 (needs DS2.4 set to ON) */ +#ifdef CONFIG_MFD_SH_MOBILE_SDHI + /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */ gpio_request(GPIO_FN_SDHI0CD, NULL); gpio_request(GPIO_FN_SDHI0WP, NULL); gpio_request(GPIO_FN_SDHI0CMD, NULL); @@ -785,7 +862,7 @@ static int __init arch_setup(void) gpio_request(GPIO_PTB6, NULL); gpio_direction_output(GPIO_PTB6, 0); - /* enable SDHI1 (needs DS2.6,7 set to ON,OFF) */ + /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */ gpio_request(GPIO_FN_SDHI1CD, NULL); gpio_request(GPIO_FN_SDHI1WP, NULL); gpio_request(GPIO_FN_SDHI1CMD, NULL); @@ -799,6 +876,22 @@ static int __init arch_setup(void) /* I/O buffer drive ability is high for SDHI1 */ ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); +#else + /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ + gpio_request(GPIO_FN_MSIOF0_TXD, NULL); + gpio_request(GPIO_FN_MSIOF0_RXD, NULL); + gpio_request(GPIO_FN_MSIOF0_TSCK, NULL); + gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */ + gpio_direction_output(GPIO_PTM4, 1); /* active low CS */ + gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */ + gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */ + gpio_request(GPIO_PTY6, NULL); /* write protect */ + gpio_direction_input(GPIO_PTY6); + gpio_request(GPIO_PTY7, NULL); /* card detect */ + gpio_direction_input(GPIO_PTY7); + + spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); +#endif /* enable I2C device */ i2c_register_board_info(1, i2c1_devices, -- cgit v1.2.3-70-g09d2 From 207efd07e8c7b4da1f6f9940c40e20b8afc9195c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 15 Dec 2009 05:37:16 +0000 Subject: sh: mach-ecovec24: Add tw9910 support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 50 ++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index cfd958c613d..d4ac32b6357 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -28,6 +28,7 @@ #include #include