From d034f53cc6c5c09a4e10cb9716986f3844c58514 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 17 Dec 2014 14:40:42 +0100 Subject: ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds As of commit 9a1091ef0017c40a ("irqchip: gic: Support hierarchy irq domain."), armadillo-legacy hangs during boot with: sh-tmu.0: ch0: used for clock events sh-tmu.0: ch0: used for periodic clock events sh-tmu.0: ch0: failed to request irq 230 sh-tmu.0: ch1: used as clock source sh-cmt-48.1: ch0: failed to request irq 90 sh-cmt-48.1: ch0: registration failed earlytimer: unable to probe sh-cmt-48 early. Calibrating delay loop... This happens because the IRQ numbers of the GIC are now virtual, and no longer match the hardcoded hardware IRQ numbers in the platform board code. To fix this, instantiate the GIC from platform board code when compiling a legacy kernel, like is done on sh73a0 for kzm9g-legacy. Signed-off-by: Geert Uytterhoeven Acked-by: Marc Zyngier Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-r8a7740.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 0bfe2261c4e..e76e2f8d1ff 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -793,7 +793,14 @@ void __init r8a7740_init_irq_of(void) void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10); void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4); +#ifdef CONFIG_ARCH_SHMOBILE_LEGACY + void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000); + void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000); + + gic_init(0, 29, gic_dist_base, gic_cpu_base); +#else irqchip_init(); +#endif /* route signals to GIC */ iowrite32(0x0, pfc_inta_ctrl); -- cgit v1.2.3-70-g09d2 From b0ddb319db3d7a1943445f0de0a45c07a7f3457a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 6 Jan 2015 14:39:10 +0100 Subject: ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances The sh73a0 INTC can't mask interrupts properly most likely due to a hardware bug. Set the .control_parent flag to delegate masking to the parent interrupt controller, like was already done for irqpin1. Without this, accessing the three-axis digital accelerometer ADXL345 on kzm9g through /dev/input/event1 causes an interrupt storm, which requires a power-cycle to recover from. This was inspired by a patch for arch/arm/boot/dts/sh73a0.dtsi from Laurent Pinchart . Signed-off-by: Geert Uytterhoeven Fixes: 341eb5465f67437a ("ARM: shmobile: INTC External IRQ pin driver on sh73a0") Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-sh73a0.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index fa7cab820ab..b5d0cf579c6 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -579,6 +579,7 @@ static struct platform_device ipmmu_device = { static struct renesas_intc_irqpin_config irqpin0_platform_data = { .irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */ + .control_parent = true, }; static struct resource irqpin0_resources[] = { @@ -640,6 +641,7 @@ static struct platform_device irqpin1_device = { static struct renesas_intc_irqpin_config irqpin2_platform_data = { .irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */ + .control_parent = true, }; static struct resource irqpin2_resources[] = { @@ -670,6 +672,7 @@ static struct platform_device irqpin2_device = { static struct renesas_intc_irqpin_config irqpin3_platform_data = { .irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */ + .control_parent = true, }; static struct resource irqpin3_resources[] = { -- cgit v1.2.3-70-g09d2