From b04a2f5b9ff5460a0bfbc97c9d6dd0017ad0cbe5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 3 Dec 2014 09:56:59 -0800 Subject: net: bcmgenet: add support for new GENET PHY revision scheme Starting with GPHY revision G0, the GENET register layout has changed to use the same numbering scheme as the Starfighter 2 switch. This means that GPHY major revision is in bits 15:12, minor in bits 11:8 and patch level is in bits 7:4. Introduce a small heuristic which checks for the old scheme first, tests for the new scheme and finally attempts to catch reserved values and aborts. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index adfef5ca0d5..7078bd386fb 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2504,6 +2504,7 @@ static void bcmgenet_set_hw_params(struct bcmgenet_priv *priv) struct bcmgenet_hw_params *params; u32 reg; u8 major; + u16 gphy_rev; if (GENET_IS_V4(priv)) { bcmgenet_dma_regs = bcmgenet_dma_regs_v3plus; @@ -2552,8 +2553,29 @@ static void bcmgenet_set_hw_params(struct bcmgenet_priv *priv) * to pass this information to the PHY driver. The PHY driver expects * to find the PHY major revision in bits 15:8 while the GENET register * stores that information in bits 7:0, account for that. + * + * On newer chips, starting with PHY revision G0, a new scheme is + * deployed similar to the Starfighter 2 switch with GPHY major + * revision in bits 15:8 and patch level in bits 7:0. Major revision 0 + * is reserved as well as special value 0x01ff, we have a small + * heuristic to check for the new GPHY revision and re-arrange things + * so the GPHY driver is happy. */ - priv->gphy_rev = (reg & 0xffff) << 8; + gphy_rev = reg & 0xffff; + + /* This is the good old scheme, just GPHY major, no minor nor patch */ + if ((gphy_rev & 0xf0) != 0) + priv->gphy_rev = gphy_rev << 8; + + /* This is the new scheme, GPHY major rolls over with 0x10 = rev G0 */ + else if ((gphy_rev & 0xff00) != 0) + priv->gphy_rev = gphy_rev; + + /* This is reserved so should require special treatment */ + else if (gphy_rev == 0 || gphy_rev == 0x01ff) { + pr_warn("Invalid GPHY revision detected: 0x%04x\n", gphy_rev); + return; + } #ifdef CONFIG_PHYS_ADDR_T_64BIT if (!(params->flags & GENET_HAS_40BITS)) -- cgit v1.2.3-70-g09d2