From 035978beaf79e3bd0c4f6308e8c8ce5067e26b9d Mon Sep 17 00:00:00 2001 From: George Spelvin Date: Mon, 17 Jun 2013 01:45:50 -0400 Subject: usb: phy: Improve Kconfig help for CONFIG_USB_PHY The previous text confused users by not describing the very common (e.g. x86 PC) sitations where no PHY driver is necessary. Signed-off-by: George Spelvin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/Kconfig | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 7ef3eb8617a..2311b1e4e43 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -4,11 +4,17 @@ menuconfig USB_PHY bool "USB Physical Layer drivers" help - USB controllers (those which are host, device or DRD) need a - device to handle the physical layer signalling, commonly called - a PHY. + Most USB controllers have the physical layer signalling part + (commonly called a PHY) built in. However, dual-role devices + (a.k.a. USB on-the-go) which support being USB master or slave + with the same connector often use an external PHY. - The following drivers add support for such PHY devices. + The drivers in this submenu add support for such PHY devices. + They are not needed for standard master-only (or the vast + majority of slave-only) USB interfaces. + + If you're not sure if this applies to you, it probably doesn't; + say N here. if USB_PHY -- cgit v1.2.3-70-g09d2 From 35a2fbc941accd0e9f1bfadd669311786118d874 Mon Sep 17 00:00:00 2001 From: Anders Hammarquist Date: Wed, 19 Jun 2013 01:45:48 +0200 Subject: USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable Add product id for Abbott strip port cable for Precision meter which uses the TI 3410 chip. Signed-off-by: Anders Hammarquist Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 3 ++- drivers/usb/serial/ti_usb_3410_5052.h | 4 +++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index c92c5ed4e58..e581c2549a5 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -172,7 +172,8 @@ static struct usb_device_id ti_id_table_3410[15+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, - { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index b353e7e3d48..4a2423e84d5 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -52,7 +52,9 @@ /* Abbott Diabetics vendor and product ids */ #define ABBOTT_VENDOR_ID 0x1a61 -#define ABBOTT_PRODUCT_ID 0x3410 +#define ABBOTT_STEREO_PLUG_ID 0x3410 +#define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID +#define ABBOTT_STRIP_PORT_ID 0x3420 /* Commands */ #define TI_GET_VERSION 0x01 -- cgit v1.2.3-70-g09d2