From 9b12771ad243541ad28e651f40cc9c7905ee32c3 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 4 Feb 2011 12:23:13 +0000 Subject: mach-omap2: mux: world-writable debugfs files Do not create mux debugfs files as world-writable. Signed-off-by: Vasiliy Kulikov Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 98148b6c36e..6c84659cf84 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -605,7 +605,7 @@ static void __init omap_mux_dbg_create_entry( list_for_each_entry(e, &partition->muxmodes, node) { struct omap_mux *m = &e->mux; - (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir, + (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir, m, &omap_mux_dbg_signal_fops); } } -- cgit v1.2.3-70-g09d2 From f9fbe47cc1487ba1a5f543a315f8a59bc77c1a68 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 4 Feb 2011 12:23:16 +0000 Subject: mach-omap2: pm: world-writable debugfs timer files Don't allow all users to change timer settings. Signed-off-by: Vasiliy Kulikov Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm-debug.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 125f56591fb..a5a83b358dd 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -637,14 +637,14 @@ static int __init pm_dbg_init(void) } - (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d, + (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d, &enable_off_mode, &pm_dbg_option_fops); - (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d, + (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d, &sleep_while_idle, &pm_dbg_option_fops); - (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d, + (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d, &wakeup_timer_seconds, &pm_dbg_option_fops); (void) debugfs_create_file("wakeup_timer_milliseconds", - S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds, + S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds, &pm_dbg_option_fops); pm_dbg_init_done = 1; -- cgit v1.2.3-70-g09d2 From 1232a185ddd500b61b8dc389ad1a357e6b425548 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 4 Feb 2011 12:23:20 +0000 Subject: mach-omap2: smartreflex: world-writable debugfs voltage files Don't allow everybody to change voltage settings. Signed-off-by: Vasiliy Kulikov Acked-by: Kevin Hilman Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/smartreflex.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index c37e823266d..95ac336fe3f 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -900,7 +900,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) return PTR_ERR(dbg_dir); } - (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUGO, dbg_dir, + (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, dbg_dir, (void *)sr_info, &pm_sr_fops); (void) debugfs_create_x32("errweight", S_IRUGO, dbg_dir, &sr_info->err_weight); @@ -939,7 +939,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) strcpy(name, "volt_"); sprintf(volt_name, "%d", volt_data[i].volt_nominal); strcat(name, volt_name); - (void) debugfs_create_x32(name, S_IRUGO | S_IWUGO, nvalue_dir, + (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir, &(sr_info->nvalue_table[i].nvalue)); } -- cgit v1.2.3-70-g09d2 From b66a70d5e9929f3b0df5a7177bba75652d2f4c3e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 9 Feb 2011 18:04:11 +0000 Subject: ASoC: Sync initial widget state with hardware ASoC generally uses the register defaults for everything, but in some cases the hardware will default to enabling some of the DAPM widgets (clocks for example). Ensure that DAPM knows about the actual widget state at initialisation by reading the enable bits after instantiating the widgets so they don't get left enabled needlessly. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- sound/soc/soc-dapm.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 8194f150bab..4df96ec9a81 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1627,6 +1627,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_add_routes); int snd_soc_dapm_new_widgets(struct snd_soc_dapm_context *dapm) { struct snd_soc_dapm_widget *w; + unsigned int val; list_for_each_entry(w, &dapm->card->widgets, list) { @@ -1675,6 +1676,18 @@ int snd_soc_dapm_new_widgets(struct snd_soc_dapm_context *dapm) case snd_soc_dapm_post: break; } + + /* Read the initial power state from the device */ + if (w->reg >= 0) { + val = snd_soc_read(w->codec, w->reg); + val &= 1 << w->shift; + if (w->invert) + val = !val; + + if (val) + w->power = 1; + } + w->new = 1; } -- cgit v1.2.3-70-g09d2 From 8e6bfb9b1f79e07c18b0ae406c7c678fc54e4d8e Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 10 Feb 2011 13:24:32 +0100 Subject: ASoC: CX20442: fix wrong reg_cache_default content Content of the CX20442's snd_soc_codec_driver.reg_cache_default pointed area, introduced with my recent NULL pointer dereferece fix (commit f019ee5feb344ff0b22b58df4568676295aae14f), occured wrong after further testing, more thorough than just booting successfully. There are two problems with it: 1) It should read (1 << CX20442_TELOUT) | (1 << CX20442_MIC), not CX20442_TELOUT | CX20442_MIC. 2) While correctly matching actual codec hardware state on boot when fixed per 1), a few more code modifications would still be required to reflect that state not only into register cache, but also force them into DAPM pins state, otherwise an inconsitency occures which may prevent further codec state changes from being applied correctly. As a result, the phone stops ringing after reboot, until someone picks up the handset for the first time. Revert that reg_cache_default content to a working, previous de facto default value of 0, in hope this change can still be accepted as an rc cycle fix. Created and tested against linux-2.6.38-rc4 Signed-off-by: Janusz Krzysztofik Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/cx20442.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c index bb4bf65b9e7..0bb424af956 100644 --- a/sound/soc/codecs/cx20442.c +++ b/sound/soc/codecs/cx20442.c @@ -367,7 +367,7 @@ static int cx20442_codec_remove(struct snd_soc_codec *codec) return 0; } -static const u8 cx20442_reg = CX20442_TELOUT | CX20442_MIC; +static const u8 cx20442_reg; static struct snd_soc_codec_driver cx20442_codec_dev = { .probe = cx20442_codec_probe, -- cgit v1.2.3-70-g09d2 From 28d639f7bd2559e3d6dc10c0316d19154b28a2a4 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 10 Feb 2011 15:37:13 -0700 Subject: ASoC: WM8903: Fix mic detection register definitions * There is no hysteresis enable field in the current datasheet. * Mic detection threshold field is only 2 bits wide. Signed-off-by: Stephen Warren Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- include/sound/wm8903.h | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/include/sound/wm8903.h b/include/sound/wm8903.h index b4a0db2307e..1eeebd534f7 100644 --- a/include/sound/wm8903.h +++ b/include/sound/wm8903.h @@ -17,13 +17,9 @@ /* * R6 (0x06) - Mic Bias Control 0 */ -#define WM8903_MICDET_HYST_ENA 0x0080 /* MICDET_HYST_ENA */ -#define WM8903_MICDET_HYST_ENA_MASK 0x0080 /* MICDET_HYST_ENA */ -#define WM8903_MICDET_HYST_ENA_SHIFT 7 /* MICDET_HYST_ENA */ -#define WM8903_MICDET_HYST_ENA_WIDTH 1 /* MICDET_HYST_ENA */ -#define WM8903_MICDET_THR_MASK 0x0070 /* MICDET_THR - [6:4] */ -#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [6:4] */ -#define WM8903_MICDET_THR_WIDTH 3 /* MICDET_THR - [6:4] */ +#define WM8903_MICDET_THR_MASK 0x0030 /* MICDET_THR - [5:4] */ +#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [5:4] */ +#define WM8903_MICDET_THR_WIDTH 2 /* MICDET_THR - [5:4] */ #define WM8903_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */ #define WM8903_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */ #define WM8903_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */ -- cgit v1.2.3-70-g09d2 From 3088e3b4963d26d6f6f54987f595b974ed6d48d8 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 10 Feb 2011 15:37:14 -0700 Subject: ASoC: WM8903: Fix mic detection enable logic The mic detection HW should be enabled when either mic or short detection is required, not when only both are required. Signed-off-by: Stephen Warren Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8903.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index 987476a5895..017d99ceb42 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -1482,7 +1482,7 @@ int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, WM8903_MICDET_EINT | WM8903_MICSHRT_EINT, irq_mask); - if (det && shrt) { + if (det || shrt) { /* Enable mic detection, this may not have been set through * platform data (eg, if the defaults are OK). */ snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0, -- cgit v1.2.3-70-g09d2 From 173efa09e4c807a2a764509ddd593ad13a44d1df Mon Sep 17 00:00:00 2001 From: Dimitris Papastamos Date: Fri, 11 Feb 2011 16:32:11 +0000 Subject: ASoC: WM8994: Improve robustness in some use cases Ensure that on disabling certain registers such as AIF1DAC1L, AIF1DAC1R etc. the AIF1CLK and AIF2CLK remain enabled. Similarly when enabling those registers, AIF1CLK and AIF2CLK will remain disabled. Signed-off-by: Dimitris Papastamos Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8994.c | 142 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 133 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 37b8aa8a680..bd0cfdd1386 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -107,6 +107,9 @@ struct wm8994_priv { int revision; struct wm8994_pdata *pdata; + + unsigned int aif1clk_enable:1; + unsigned int aif2clk_enable:1; }; static int wm8994_readable(unsigned int reg) @@ -1004,6 +1007,82 @@ static void wm8994_update_class_w(struct snd_soc_codec *codec) } } +static int late_enable_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (wm8994->aif1clk_enable) + snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1, + WM8994_AIF1CLK_ENA_MASK, + WM8994_AIF1CLK_ENA); + if (wm8994->aif2clk_enable) + snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1, + WM8994_AIF2CLK_ENA_MASK, + WM8994_AIF2CLK_ENA); + break; + } + + return 0; +} + +static int late_disable_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_POST_PMD: + if (wm8994->aif1clk_enable) { + snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1, + WM8994_AIF1CLK_ENA_MASK, 0); + wm8994->aif1clk_enable = 0; + } + if (wm8994->aif2clk_enable) { + snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1, + WM8994_AIF2CLK_ENA_MASK, 0); + wm8994->aif2clk_enable = 0; + } + break; + } + + return 0; +} + +static int aif1clk_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + wm8994->aif1clk_enable = 1; + break; + } + + return 0; +} + +static int aif2clk_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + wm8994->aif2clk_enable = 1; + break; + } + + return 0; +} + static const char *hp_mux_text[] = { "Mixer", "DAC", @@ -1272,6 +1351,29 @@ static const struct soc_enum aif2dacr_src_enum = static const struct snd_kcontrol_new aif2dacr_src_mux = SOC_DAPM_ENUM("AIF2DACR Mux", aif2dacr_src_enum); +static const struct snd_soc_dapm_widget wm8994_lateclk_revd_widgets[] = { +SND_SOC_DAPM_SUPPLY("AIF1CLK", SND_SOC_NOPM, 0, 0, aif1clk_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), +SND_SOC_DAPM_SUPPLY("AIF2CLK", SND_SOC_NOPM, 0, 0, aif2clk_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + +SND_SOC_DAPM_PGA_E("Late DAC1L Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0, + late_enable_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_PGA_E("Late DAC1R Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0, + late_enable_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_PGA_E("Late DAC2L Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0, + late_enable_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_PGA_E("Late DAC2R Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0, + late_enable_ev, SND_SOC_DAPM_PRE_PMU), + +SND_SOC_DAPM_POST("Late Disable PGA", late_disable_ev) +}; + +static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = { +SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, NULL, 0) +}; + static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = { SND_SOC_DAPM_INPUT("DMIC1DAT"), SND_SOC_DAPM_INPUT("DMIC2DAT"), @@ -1284,9 +1386,6 @@ SND_SOC_DAPM_SUPPLY("DSP1CLK", WM8994_CLOCKING_1, 3, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("DSP2CLK", WM8994_CLOCKING_1, 2, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("DSPINTCLK", WM8994_CLOCKING_1, 1, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, NULL, 0), - SND_SOC_DAPM_AIF_OUT("AIF1ADC1L", NULL, 0, WM8994_POWER_MANAGEMENT_4, 9, 0), SND_SOC_DAPM_AIF_OUT("AIF1ADC1R", NULL, @@ -1516,14 +1615,12 @@ static const struct snd_soc_dapm_route intercon[] = { { "AIF2ADC Mux", "AIF3DACDAT", "AIF3ADCDAT" }, /* DAC1 inputs */ - { "DAC1L", NULL, "DAC1L Mixer" }, { "DAC1L Mixer", "AIF2 Switch", "AIF2DACL" }, { "DAC1L Mixer", "AIF1.2 Switch", "AIF1DAC2L" }, { "DAC1L Mixer", "AIF1.1 Switch", "AIF1DAC1L" }, { "DAC1L Mixer", "Left Sidetone Switch", "Left Sidetone" }, { "DAC1L Mixer", "Right Sidetone Switch", "Right Sidetone" }, - { "DAC1R", NULL, "DAC1R Mixer" }, { "DAC1R Mixer", "AIF2 Switch", "AIF2DACR" }, { "DAC1R Mixer", "AIF1.2 Switch", "AIF1DAC2R" }, { "DAC1R Mixer", "AIF1.1 Switch", "AIF1DAC1R" }, @@ -1532,7 +1629,6 @@ static const struct snd_soc_dapm_route intercon[] = { /* DAC2/AIF2 outputs */ { "AIF2ADCL", NULL, "AIF2DAC2L Mixer" }, - { "DAC2L", NULL, "AIF2DAC2L Mixer" }, { "AIF2DAC2L Mixer", "AIF2 Switch", "AIF2DACL" }, { "AIF2DAC2L Mixer", "AIF1.2 Switch", "AIF1DAC2L" }, { "AIF2DAC2L Mixer", "AIF1.1 Switch", "AIF1DAC1L" }, @@ -1540,7 +1636,6 @@ static const struct snd_soc_dapm_route intercon[] = { { "AIF2DAC2L Mixer", "Right Sidetone Switch", "Right Sidetone" }, { "AIF2ADCR", NULL, "AIF2DAC2R Mixer" }, - { "DAC2R", NULL, "AIF2DAC2R Mixer" }, { "AIF2DAC2R Mixer", "AIF2 Switch", "AIF2DACR" }, { "AIF2DAC2R Mixer", "AIF1.2 Switch", "AIF1DAC2R" }, { "AIF2DAC2R Mixer", "AIF1.1 Switch", "AIF1DAC1R" }, @@ -1584,6 +1679,24 @@ static const struct snd_soc_dapm_route intercon[] = { { "Right Headphone Mux", "DAC", "DAC1R" }, }; +static const struct snd_soc_dapm_route wm8994_lateclk_revd_intercon[] = { + { "DAC1L", NULL, "Late DAC1L Enable PGA" }, + { "Late DAC1L Enable PGA", NULL, "DAC1L Mixer" }, + { "DAC1R", NULL, "Late DAC1R Enable PGA" }, + { "Late DAC1R Enable PGA", NULL, "DAC1R Mixer" }, + { "DAC2L", NULL, "Late DAC2L Enable PGA" }, + { "Late DAC2L Enable PGA", NULL, "AIF2DAC2L Mixer" }, + { "DAC2R", NULL, "Late DAC2R Enable PGA" }, + { "Late DAC2R Enable PGA", NULL, "AIF2DAC2R Mixer" } +}; + +static const struct snd_soc_dapm_route wm8994_lateclk_intercon[] = { + { "DAC1L", NULL, "DAC1L Mixer" }, + { "DAC1R", NULL, "DAC1R Mixer" }, + { "DAC2L", NULL, "AIF2DAC2L Mixer" }, + { "DAC2R", NULL, "AIF2DAC2R Mixer" }, +}; + static const struct snd_soc_dapm_route wm8994_revd_intercon[] = { { "AIF1DACDAT", NULL, "AIF2DACDAT" }, { "AIF2DACDAT", NULL, "AIF1DACDAT" }, @@ -3125,6 +3238,12 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) case WM8994: snd_soc_dapm_new_controls(dapm, wm8994_specific_dapm_widgets, ARRAY_SIZE(wm8994_specific_dapm_widgets)); + if (wm8994->revision < 4) + snd_soc_dapm_new_controls(dapm, wm8994_lateclk_revd_widgets, + ARRAY_SIZE(wm8994_lateclk_revd_widgets)); + else + snd_soc_dapm_new_controls(dapm, wm8994_lateclk_widgets, + ARRAY_SIZE(wm8994_lateclk_widgets)); break; case WM8958: snd_soc_add_controls(codec, wm8958_snd_controls, @@ -3143,10 +3262,15 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) snd_soc_dapm_add_routes(dapm, wm8994_intercon, ARRAY_SIZE(wm8994_intercon)); - if (wm8994->revision < 4) + if (wm8994->revision < 4) { snd_soc_dapm_add_routes(dapm, wm8994_revd_intercon, ARRAY_SIZE(wm8994_revd_intercon)); - + snd_soc_dapm_add_routes(dapm, wm8994_lateclk_revd_intercon, + ARRAY_SIZE(wm8994_lateclk_revd_intercon)); + } else { + snd_soc_dapm_add_routes(dapm, wm8994_lateclk_intercon, + ARRAY_SIZE(wm8994_lateclk_intercon)); + } break; case WM8958: snd_soc_dapm_add_routes(dapm, wm8958_intercon, -- cgit v1.2.3-70-g09d2 From c52fd021bc027a90a10782c0dcf667ac0135e478 Mon Sep 17 00:00:00 2001 From: Dimitris Papastamos Date: Fri, 11 Feb 2011 16:32:12 +0000 Subject: ASoC: WM8994: Improve playback robustness On WM8994 revision D and earlier ensure proper playback robustness as some rare use cases can trigger issues. Signed-off-by: Dimitris Papastamos Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8994.c | 59 +++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 52 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index bd0cfdd1386..a60b5dbf015 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1083,6 +1083,17 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w, return 0; } +static int dac_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + unsigned int mask = 1 << w->shift; + + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + mask, mask); + return 0; +} + static const char *hp_mux_text[] = { "Mixer", "DAC", @@ -1374,6 +1385,24 @@ SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, NULL, 0) }; +static const struct snd_soc_dapm_widget wm8994_dac_revd_widgets[] = { +SND_SOC_DAPM_DAC_E("DAC2L", NULL, SND_SOC_NOPM, 3, 0, + dac_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_DAC_E("DAC2R", NULL, SND_SOC_NOPM, 2, 0, + dac_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_DAC_E("DAC1L", NULL, SND_SOC_NOPM, 1, 0, + dac_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_DAC_E("DAC1R", NULL, SND_SOC_NOPM, 0, 0, + dac_ev, SND_SOC_DAPM_PRE_PMU), +}; + +static const struct snd_soc_dapm_widget wm8994_dac_widgets[] = { +SND_SOC_DAPM_DAC("DAC2L", NULL, WM8994_POWER_MANAGEMENT_5, 3, 0), +SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 2, 0), +SND_SOC_DAPM_DAC("DAC1L", NULL, WM8994_POWER_MANAGEMENT_5, 1, 0), +SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0), +}; + static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = { SND_SOC_DAPM_INPUT("DMIC1DAT"), SND_SOC_DAPM_INPUT("DMIC2DAT"), @@ -1471,11 +1500,6 @@ SND_SOC_DAPM_ADC("ADCR", NULL, SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux), SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux), -SND_SOC_DAPM_DAC("DAC2L", NULL, WM8994_POWER_MANAGEMENT_5, 3, 0), -SND_SOC_DAPM_DAC("DAC2R", NULL, WM8994_POWER_MANAGEMENT_5, 2, 0), -SND_SOC_DAPM_DAC("DAC1L", NULL, WM8994_POWER_MANAGEMENT_5, 1, 0), -SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0), - SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux), SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux), @@ -2627,6 +2651,22 @@ static int wm8994_resume(struct snd_soc_codec *codec) { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); int i, ret; + unsigned int val, mask; + + if (wm8994->revision < 4) { + /* force a HW read */ + val = wm8994_reg_read(codec->control_data, + WM8994_POWER_MANAGEMENT_5); + + /* modify the cache only */ + codec->cache_only = 1; + mask = WM8994_DAC1R_ENA | WM8994_DAC1L_ENA | + WM8994_DAC2R_ENA | WM8994_DAC2L_ENA; + val &= mask; + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + mask, val); + codec->cache_only = 0; + } /* Restore the registers */ ret = snd_soc_cache_sync(codec); @@ -3238,12 +3278,17 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) case WM8994: snd_soc_dapm_new_controls(dapm, wm8994_specific_dapm_widgets, ARRAY_SIZE(wm8994_specific_dapm_widgets)); - if (wm8994->revision < 4) + if (wm8994->revision < 4) { snd_soc_dapm_new_controls(dapm, wm8994_lateclk_revd_widgets, ARRAY_SIZE(wm8994_lateclk_revd_widgets)); - else + snd_soc_dapm_new_controls(dapm, wm8994_dac_revd_widgets, + ARRAY_SIZE(wm8994_dac_revd_widgets)); + } else { snd_soc_dapm_new_controls(dapm, wm8994_lateclk_widgets, ARRAY_SIZE(wm8994_lateclk_widgets)); + snd_soc_dapm_new_controls(dapm, wm8994_dac_widgets, + ARRAY_SIZE(wm8994_dac_widgets)); + } break; case WM8958: snd_soc_add_controls(codec, wm8958_snd_controls, -- cgit v1.2.3-70-g09d2 From 3017358a75917b5ed5ad361c02ba2a7e257d3b2a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 11 Feb 2011 11:42:19 +0000 Subject: ASoC: Ensure supplies are maintained for force enabled widgets If a widget has been force enabled then not only do we need to keep the widget itself enabled, we also need to keep any supplies the widget requires enabled. The user could force all the individual widgets on but this requires too much knowledge of device internals. Signed-off-by: Mark Brown Tested-by: Stephen Warren Acked-by: Liam Girdwood --- sound/soc/soc-dapm.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 4df96ec9a81..25e54230cc6 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -712,7 +712,15 @@ static int dapm_supply_check_power(struct snd_soc_dapm_widget *w) !path->connected(path->source, path->sink)) continue; - if (path->sink && path->sink->power_check && + if (!path->sink) + continue; + + if (path->sink->force) { + power = 1; + break; + } + + if (path->sink->power_check && path->sink->power_check(path->sink)) { power = 1; break; -- cgit v1.2.3-70-g09d2 From f7bee80945155ad0326916486dabc38428c6cdef Mon Sep 17 00:00:00 2001 From: Krzysztof Wojcik Date: Mon, 14 Feb 2011 10:01:41 +1100 Subject: md: Fix raid1->raid0 takeover Takeover raid1->raid0 not succeded. Kernel message is shown: "md/raid0:md126: too few disks (1 of 2) - aborting!" Problem was that we weren't updating ->raid_disks for that takeover, unlike all the others. Signed-off-by: Krzysztof Wojcik Signed-off-by: NeilBrown --- drivers/md/raid0.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 637a96855ed..75671dfee55 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -670,6 +670,7 @@ static void *raid0_takeover_raid1(mddev_t *mddev) mddev->new_layout = 0; mddev->new_chunk_sectors = 128; /* by default set chunk size to 64k */ mddev->delta_disks = 1 - mddev->raid_disks; + mddev->raid_disks = 1; /* make sure it will be not marked as dirty */ mddev->recovery_cp = MaxSector; -- cgit v1.2.3-70-g09d2 From eca83258f1d81575576ca553075c641849150f23 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 11 Feb 2011 19:56:42 +0000 Subject: OMAP2420: mailbox: fix IVA vs DSP IRQ numbering The IRQ numbering for the IVA and DSP mailboxes was switched due to the wrong ordering in the OMAP2 mbox list. Switch the ordering so DSP is first and matches all the other SoCs. Tested on OMAP2420/n810. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mailbox.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 394413dc7de..0a585dfa987 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -334,7 +334,7 @@ static struct omap_mbox mbox_iva_info = { .priv = &omap2_mbox_iva_priv, }; -struct omap_mbox *omap2_mboxes[] = { &mbox_iva_info, &mbox_dsp_info, NULL }; +struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL }; #endif #if defined(CONFIG_ARCH_OMAP4) -- cgit v1.2.3-70-g09d2 From c03773206bf2249a890c4d420ed32ef500630095 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 11 Feb 2011 19:56:43 +0000 Subject: OMAP2+: mailbox: fix lookups for multiple mailboxes The pointer math in omap_mbox_get() is not quite right, and leads to passing NULL to strcmp() when searching for an mbox that is not first in the list. Convert to using array indexing as is done in all the other functions which walk the mbox list. Tested on OMAP2420/n810, OMAP3630/zoom3, OMAP4430/Blaze Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mailbox.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 459b319a9fa..49d3208793e 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -322,15 +322,18 @@ static void omap_mbox_fini(struct omap_mbox *mbox) struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb) { - struct omap_mbox *mbox; - int ret; + struct omap_mbox *_mbox, *mbox = NULL; + int i, ret; if (!mboxes) return ERR_PTR(-EINVAL); - for (mbox = *mboxes; mbox; mbox++) - if (!strcmp(mbox->name, name)) + for (i = 0; (_mbox = mboxes[i]); i++) { + if (!strcmp(_mbox->name, name)) { + mbox = _mbox; break; + } + } if (!mbox) return ERR_PTR(-ENOENT); -- cgit v1.2.3-70-g09d2 From 0f5cd45960173ba5b36727decbb4a241cbd35ef9 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Tue, 15 Feb 2011 21:29:32 +0530 Subject: ath9k: Fix ath9k prevents CPU to enter C3 states The DMA latency issue is observed only in Intel pinetrail platforms but in the driver we had a default PM-QOS value of 55. This caused unnecessary power consumption and battery drain in other platforms. Remove the pm-qos thing in the driver code and address the throughput issue in Intel pinetrail platfroms in user space using any one of the scripts in below links: http://www.kernel.org/pub/linux/kernel/people/mcgrof/scripts/cpudmalatency.c http://johannes.sipsolutions.net/files/netlatency.c.txt More details can be found in the following bugzilla link: https://bugzilla.kernel.org/show_bug.cgi?id=27532 This reverts the following commits: 98c316e348bedffa730e6f1e4baeb8a3c3e0f28b 4dc3530df7c0428b41c00399a7ee8c929406d181 10598c124ecabbbfd7522f74de19b8f7d52a1bee Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 6 ------ drivers/net/wireless/ath/ath9k/init.c | 8 -------- drivers/net/wireless/ath/ath9k/main.c | 8 -------- 3 files changed, 22 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 23838e37d45..1a7fa6ea4cf 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -21,7 +21,6 @@ #include #include #include -#include #include "debug.h" #include "common.h" @@ -57,8 +56,6 @@ struct ath_node; #define A_MAX(a, b) ((a) > (b) ? (a) : (b)) -#define ATH9K_PM_QOS_DEFAULT_VALUE 55 - #define TSF_TO_TU(_h,_l) \ ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) @@ -633,8 +630,6 @@ struct ath_softc { struct ath_descdma txsdma; struct ath_ant_comb ant_comb; - - struct pm_qos_request_list pm_qos_req; }; struct ath_wiphy { @@ -666,7 +661,6 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz) extern struct ieee80211_ops ath9k_ops; extern int ath9k_modparam_nohwcrypt; extern int led_blink; -extern int ath9k_pm_qos_value; extern bool is_ath9k_unloaded; irqreturn_t ath_isr(int irq, void *dev); diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 087a6a95edd..a033d01bf8a 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -41,10 +41,6 @@ static int ath9k_btcoex_enable; module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444); MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence"); -int ath9k_pm_qos_value = ATH9K_PM_QOS_DEFAULT_VALUE; -module_param_named(pmqos, ath9k_pm_qos_value, int, S_IRUSR | S_IRGRP | S_IROTH); -MODULE_PARM_DESC(pmqos, "User specified PM-QOS value"); - bool is_ath9k_unloaded; /* We use the hw_value as an index into our private channel structure */ @@ -762,9 +758,6 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid, ath_init_leds(sc); ath_start_rfkill_poll(sc); - pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, - PM_QOS_DEFAULT_VALUE); - return 0; error_world: @@ -831,7 +824,6 @@ void ath9k_deinit_device(struct ath_softc *sc) } ieee80211_unregister_hw(hw); - pm_qos_remove_request(&sc->pm_qos_req); ath_rx_cleanup(sc); ath_tx_cleanup(sc); ath9k_deinit_softc(sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index da5c64597c1..a09d15f7aa6 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1173,12 +1173,6 @@ static int ath9k_start(struct ieee80211_hw *hw) ath9k_btcoex_timer_resume(sc); } - /* User has the option to provide pm-qos value as a module - * parameter rather than using the default value of - * 'ATH9K_PM_QOS_DEFAULT_VALUE'. - */ - pm_qos_update_request(&sc->pm_qos_req, ath9k_pm_qos_value); - if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en) common->bus_ops->extn_synch_en(common); @@ -1345,8 +1339,6 @@ static void ath9k_stop(struct ieee80211_hw *hw) sc->sc_flags |= SC_OP_INVALID; - pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE); - mutex_unlock(&sc->mutex); ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n"); -- cgit v1.2.3-70-g09d2 From cbe6ef1d2622e08e272600b3cb6040bed60f0450 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 16 Feb 2011 13:58:38 +1100 Subject: md: don't set_capacity before array is active. If the desired size of an array is set (via sysfs) before the array is active (which is the normal sequence), we currrently call set_capacity immediately. This means that a subsequent 'open' (as can be caused by some udev-triggers program) will notice the new size and try to probe for partitions. However as the array isn't quite ready yet the read will fail. Then when the array is read, as the size doesn't change again we don't try to re-probe. So when setting array size via sysfs, only call set_capacity if the array is already active. Signed-off-by: NeilBrown --- drivers/md/md.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 0cc30ecda4c..6818ff4aa8d 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4138,10 +4138,10 @@ array_size_store(mddev_t *mddev, const char *buf, size_t len) } mddev->array_sectors = sectors; - set_capacity(mddev->gendisk, mddev->array_sectors); - if (mddev->pers) + if (mddev->pers) { + set_capacity(mddev->gendisk, mddev->array_sectors); revalidate_disk(mddev->gendisk); - + } return len; } -- cgit v1.2.3-70-g09d2 From 8f5f02c460b7ca74ce55ce126ce0c1e58a3f923d Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 16 Feb 2011 13:58:51 +1100 Subject: md: correctly handle probe of an 'mdp' device. 'mdp' devices are md devices with preallocated device numbers for partitions. As such it is possible to mknod and open a partition before opening the whole device. this causes md_probe() to be called with a device number of a partition, which in-turn calls mddev_find with such a number. However mddev_find expects the number of a 'whole device' and does the wrong thing with partition numbers. So add code to mddev_find to remove the 'partition' part of a device number and just work with the 'whole device'. This patch addresses https://bugzilla.kernel.org/show_bug.cgi?id=28652 Reported-by: hkmaly@bigfoot.com Signed-off-by: NeilBrown Cc: --- drivers/md/md.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index 6818ff4aa8d..330addfe9b7 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -553,6 +553,9 @@ static mddev_t * mddev_find(dev_t unit) { mddev_t *mddev, *new = NULL; + if (unit && MAJOR(unit) != MD_MAJOR) + unit &= ~((1< Date: Wed, 16 Feb 2011 14:08:02 +0300 Subject: perf, x86: P4 PMU: Fix spurious NMI messages Several people have reported spurious unknown NMI messages on some P4 CPUs. This patch fixes it by checking for an overflow (negative counter values) directly, instead of relying on the P4_CCCR_OVF bit. Reported-by: George Spelvin Reported-by: Meelis Roos Reported-by: Don Zickus Reported-by: Dave Airlie Signed-off-by: Cyrill Gorcunov Cc: Lin Ming Cc: Don Zickus Cc: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/include/asm/perf_event_p4.h | 1 + arch/x86/kernel/cpu/perf_event_p4.c | 11 ++++++++--- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/perf_event_p4.h b/arch/x86/include/asm/perf_event_p4.h index e2f6a99f14a..cc29086e30c 100644 --- a/arch/x86/include/asm/perf_event_p4.h +++ b/arch/x86/include/asm/perf_event_p4.h @@ -22,6 +22,7 @@ #define ARCH_P4_CNTRVAL_BITS (40) #define ARCH_P4_CNTRVAL_MASK ((1ULL << ARCH_P4_CNTRVAL_BITS) - 1) +#define ARCH_P4_UNFLAGGED_BIT ((1ULL) << (ARCH_P4_CNTRVAL_BITS - 1)) #define P4_ESCR_EVENT_MASK 0x7e000000U #define P4_ESCR_EVENT_SHIFT 25 diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index f7a0993c1e7..ff751a9f182 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -770,9 +770,14 @@ static inline int p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc) return 1; } - /* it might be unflagged overflow */ - rdmsrl(hwc->event_base + hwc->idx, v); - if (!(v & ARCH_P4_CNTRVAL_MASK)) + /* + * In some circumstances the overflow might issue an NMI but did + * not set P4_CCCR_OVF bit. Because a counter holds a negative value + * we simply check for high bit being set, if it's cleared it means + * the counter has reached zero value and continued counting before + * real NMI signal was received: + */ + if (!(v & ARCH_P4_UNFLAGGED_BIT)) return 1; return 0; -- cgit v1.2.3-70-g09d2 From 4fe757dd48a9e95e1a071291f15dda5421dacb66 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 15 Feb 2011 22:26:07 +0100 Subject: perf: Fix throttle logic It was possible to call pmu::start() on an already running event. In particular this lead so some wreckage as the hrtimer events would re-initialize active timers. This was due to throttled events being activated again by scheduling. Scheduling in a context would add and force start events, resulting in running events with a possible throttle status. The next tick to hit that task will then try to unthrottle the event and call ->start() on an already running event. Reported-by: Jeff Moyer Cc: Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/perf_event.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 999835b6112..656222fcf76 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -782,6 +782,10 @@ retry: raw_spin_unlock_irq(&ctx->lock); } +#define MAX_INTERRUPTS (~0ULL) + +static void perf_log_throttle(struct perf_event *event, int enable); + static int event_sched_in(struct perf_event *event, struct perf_cpu_context *cpuctx, @@ -794,6 +798,17 @@ event_sched_in(struct perf_event *event, event->state = PERF_EVENT_STATE_ACTIVE; event->oncpu = smp_processor_id(); + + /* + * Unthrottle events, since we scheduled we might have missed several + * ticks already, also for a heavily scheduling task there is little + * guarantee it'll get a tick in a timely manner. + */ + if (unlikely(event->hw.interrupts == MAX_INTERRUPTS)) { + perf_log_throttle(event, 1); + event->hw.interrupts = 0; + } + /* * The new state must be visible before we turn it on in the hardware: */ @@ -1596,10 +1611,6 @@ void __perf_event_task_sched_in(struct task_struct *task) } } -#define MAX_INTERRUPTS (~0ULL) - -static void perf_log_throttle(struct perf_event *event, int enable); - static u64 perf_calculate_period(struct perf_event *event, u64 nsec, u64 count) { u64 frequency = event->attr.sample_freq; -- cgit v1.2.3-70-g09d2 From 8efdd0cdc54f3bb5db464b3baf88f7441f54da47 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 11 Feb 2011 13:00:06 +0100 Subject: Bluetooth: fix crash with quirky dongles doing sound Quirky dongles sometimes do not use the iso interface which causes a crash with runtime PM Signed-off-by: Oliver Neukum Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/btusb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 4cefa91e6c3..664f1cc9f8d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -829,7 +829,7 @@ static void btusb_work(struct work_struct *work) if (hdev->conn_hash.sco_num > 0) { if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) { - err = usb_autopm_get_interface(data->isoc); + err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf); if (err < 0) { clear_bit(BTUSB_ISOC_RUNNING, &data->flags); usb_kill_anchored_urbs(&data->isoc_anchor); @@ -858,7 +858,7 @@ static void btusb_work(struct work_struct *work) __set_isoc_interface(hdev, 0); if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags)) - usb_autopm_put_interface(data->isoc); + usb_autopm_put_interface(data->isoc ? data->isoc : data->intf); } } -- cgit v1.2.3-70-g09d2 From 840af824b2bf9194ea596e0ddc7aa05066794ca1 Mon Sep 17 00:00:00 2001 From: Vladislav P Date: Mon, 14 Feb 2011 15:21:50 -0200 Subject: Bluetooth: Release BTM while sleeping to avoid deadlock Signed-off-by: Vladislav P Signed-off-by: Gustavo F. Padovan --- net/bluetooth/rfcomm/tty.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 2575c2db640..d7b9af4703d 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -727,7 +727,9 @@ static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp) break; } + tty_unlock(); schedule(); + tty_lock(); } set_current_state(TASK_RUNNING); remove_wait_queue(&dev->wait, &wait); -- cgit v1.2.3-70-g09d2 From e9036e336a8e5640871e0006ea4a89982b25046f Mon Sep 17 00:00:00 2001 From: "Cho, Yu-Chen" Date: Tue, 15 Feb 2011 10:20:07 +0800 Subject: Bluetooth: Add Atheros BT AR5BBU12 fw supported Add the btusb.c blacklist [0489:e02c] for Atheros AR5BBU12 BT and add to ath3k.c supported this device. Signed-off-by: Cho, Yu-Chen Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/ath3k.c | 3 +++ drivers/bluetooth/btusb.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 333c21289d9..6dcd55a74c0 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -41,6 +41,9 @@ static struct usb_device_id ath3k_table[] = { /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03F0, 0x311D) }, + + /* Atheros AR5BBU12 with sflash firmware */ + { USB_DEVICE(0x0489, 0xE02C) }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 664f1cc9f8d..b7f2f373c63 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -105,6 +105,9 @@ static struct usb_device_id blacklist_table[] = { /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, + /* Atheros AR5BBU12 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, + /* Broadcom BCM2035 */ { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, -- cgit v1.2.3-70-g09d2 From 91435650c233b93e0da389db74f4b2c11c5ad2d4 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Wed, 16 Feb 2011 13:10:41 -0500 Subject: Btrfs: put ENOSPC debugging under a mount option ENOSPC in btrfs is getting to the point where the extra debugging isn't required. I've put it under mount -o enospc_debug just in case someone is having difficult problems. Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 1 + fs/btrfs/extent-tree.c | 2 +- fs/btrfs/super.c | 7 ++++++- 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 72195378bef..6297701bc19 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1254,6 +1254,7 @@ struct btrfs_root { #define BTRFS_MOUNT_SPACE_CACHE (1 << 12) #define BTRFS_MOUNT_CLEAR_CACHE (1 << 13) #define BTRFS_MOUNT_USER_SUBVOL_RM_ALLOWED (1 << 14) +#define BTRFS_MOUNT_ENOSPC_DEBUG (1 << 15) #define btrfs_clear_opt(o, opt) ((o) &= ~BTRFS_MOUNT_##opt) #define btrfs_set_opt(o, opt) ((o) |= BTRFS_MOUNT_##opt) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index a7aaa10c530..d375fc04a06 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5377,7 +5377,7 @@ again: num_bytes, data, 1); goto again; } - if (ret == -ENOSPC) { + if (ret == -ENOSPC && btrfs_test_opt(root, ENOSPC_DEBUG)) { struct btrfs_space_info *sinfo; sinfo = __find_space_info(root->fs_info, data); diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 0209b5fc772..db0a827252b 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -155,7 +155,8 @@ enum { Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl, Opt_compress, Opt_compress_type, Opt_compress_force, Opt_compress_force_type, Opt_notreelog, Opt_ratio, Opt_flushoncommit, Opt_discard, - Opt_space_cache, Opt_clear_cache, Opt_user_subvol_rm_allowed, Opt_err, + Opt_space_cache, Opt_clear_cache, Opt_user_subvol_rm_allowed, + Opt_enospc_debug, Opt_err, }; static match_table_t tokens = { @@ -184,6 +185,7 @@ static match_table_t tokens = { {Opt_space_cache, "space_cache"}, {Opt_clear_cache, "clear_cache"}, {Opt_user_subvol_rm_allowed, "user_subvol_rm_allowed"}, + {Opt_enospc_debug, "enospc_debug"}, {Opt_err, NULL}, }; @@ -358,6 +360,9 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) case Opt_user_subvol_rm_allowed: btrfs_set_opt(info->mount_opt, USER_SUBVOL_RM_ALLOWED); break; + case Opt_enospc_debug: + btrfs_set_opt(info->mount_opt, ENOSPC_DEBUG); + break; case Opt_err: printk(KERN_INFO "btrfs: unrecognized mount option " "'%s'\n", p); -- cgit v1.2.3-70-g09d2 From c87f08ca44e83b2c8d28f63f9c33f3a270a04bbe Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Wed, 16 Feb 2011 13:57:04 -0500 Subject: Btrfs: allow balance to explicitly allocate chunks as it relocates Btrfs device shrinking and balancing ends up reallocating all the blocks in order to allow COW to move them to new destinations. It is somewhat awkward in terms of ENOSPC because most of the enospc code is built around the idea that some operation on a reference counted tree triggers allocations in the non-reference counted trees. This commit changes the balancing code to deal with enospc by trying to allocate a new chunk. If that allocation succeeds, we go ahead and retry whatever failed due to enospc. Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 2 ++ fs/btrfs/extent-tree.c | 7 +++++++ fs/btrfs/relocation.c | 13 ++++++++++++- 3 files changed, 21 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 6297701bc19..28188a786da 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2219,6 +2219,8 @@ int btrfs_error_unpin_extent_range(struct btrfs_root *root, u64 start, u64 end); int btrfs_error_discard_extent(struct btrfs_root *root, u64 bytenr, u64 num_bytes); +int btrfs_force_chunk_alloc(struct btrfs_trans_handle *trans, + struct btrfs_root *root, u64 type); /* ctree.c */ int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key, diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index d375fc04a06..100e409e905 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -8066,6 +8066,13 @@ out: return ret; } +int btrfs_force_chunk_alloc(struct btrfs_trans_handle *trans, + struct btrfs_root *root, u64 type) +{ + u64 alloc_flags = get_alloc_profile(root, type); + return do_chunk_alloc(trans, root, 2 * 1024 * 1024, alloc_flags, 1); +} + /* * helper to account the unused space of all the readonly block group in the * list. takes mirrors into account. diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 0825e4ed944..31ade5802ae 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3654,6 +3654,7 @@ static noinline_for_stack int relocate_block_group(struct reloc_control *rc) u32 item_size; int ret; int err = 0; + int progress = 0; path = btrfs_alloc_path(); if (!path) @@ -3666,9 +3667,10 @@ static noinline_for_stack int relocate_block_group(struct reloc_control *rc) } while (1) { + progress++; trans = btrfs_start_transaction(rc->extent_root, 0); BUG_ON(IS_ERR(trans)); - +restart: if (update_backref_cache(trans, &rc->backref_cache)) { btrfs_end_transaction(trans, rc->extent_root); continue; @@ -3781,6 +3783,15 @@ static noinline_for_stack int relocate_block_group(struct reloc_control *rc) } } } + if (trans && progress && err == -ENOSPC) { + ret = btrfs_force_chunk_alloc(trans, rc->extent_root, + rc->block_group->flags); + if (ret == 0) { + err = 0; + progress = 0; + goto restart; + } + } btrfs_release_path(rc->extent_root, path); clear_extent_bits(&rc->processed_blocks, 0, (u64)-1, EXTENT_DIRTY, -- cgit v1.2.3-70-g09d2 From b4dc2b8c694ead005b828f5fb7fa1134db5b6275 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 16 Feb 2011 06:06:34 +0000 Subject: Btrfs: Fix BTRFS_IOC_SUBVOL_SETFLAGS ioctl - Check user-specified flags correctly - Check the inode owership - Search root item in root tree but not fs tree Reported-by: Dan Rosenberg Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index be2d4f6aaa5..5fdb2abc4fa 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1071,12 +1071,15 @@ static noinline int btrfs_ioctl_subvol_setflags(struct file *file, if (copy_from_user(&flags, arg, sizeof(flags))) return -EFAULT; - if (flags & ~BTRFS_SUBVOL_CREATE_ASYNC) + if (flags & BTRFS_SUBVOL_CREATE_ASYNC) return -EINVAL; if (flags & ~BTRFS_SUBVOL_RDONLY) return -EOPNOTSUPP; + if (!is_owner_or_cap(inode)) + return -EACCES; + down_write(&root->fs_info->subvol_sem); /* nothing to do */ @@ -1097,7 +1100,7 @@ static noinline int btrfs_ioctl_subvol_setflags(struct file *file, goto out_reset; } - ret = btrfs_update_root(trans, root, + ret = btrfs_update_root(trans, root->fs_info->tree_root, &root->root_key, &root->root_item); btrfs_commit_transaction(trans, root); -- cgit v1.2.3-70-g09d2 From ca9b688c1c9a21635cfc8af8b68565b154185196 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 16 Feb 2011 06:06:41 +0000 Subject: Btrfs: Avoid accessing unmapped kernel address When decompressing a chunk of data, we'll copy the data out to a working buffer if the data is stored in more than one page, otherwise we'll use the mapped page directly to avoid memory copy. In the latter case, we'll end up accessing the kernel address after we've unmapped the page in a corner case. Reported-by: Juan Francisco Cantero Hurtado Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/lzo.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/lzo.c b/fs/btrfs/lzo.c index cc9b450399d..a178f5ebea7 100644 --- a/fs/btrfs/lzo.c +++ b/fs/btrfs/lzo.c @@ -280,6 +280,7 @@ static int lzo_decompress_biovec(struct list_head *ws, unsigned long tot_out; unsigned long tot_len; char *buf; + bool may_late_unmap, need_unmap; data_in = kmap(pages_in[0]); tot_len = read_compress_length(data_in); @@ -300,11 +301,13 @@ static int lzo_decompress_biovec(struct list_head *ws, tot_in += in_len; working_bytes = in_len; + may_late_unmap = need_unmap = false; /* fast path: avoid using the working buffer */ if (in_page_bytes_left >= in_len) { buf = data_in + in_offset; bytes = in_len; + may_late_unmap = true; goto cont; } @@ -329,14 +332,17 @@ cont: if (working_bytes == 0 && tot_in >= tot_len) break; - kunmap(pages_in[page_in_index]); - page_in_index++; - if (page_in_index >= total_pages_in) { + if (page_in_index + 1 >= total_pages_in) { ret = -1; - data_in = NULL; goto done; } - data_in = kmap(pages_in[page_in_index]); + + if (may_late_unmap) + need_unmap = true; + else + kunmap(pages_in[page_in_index]); + + data_in = kmap(pages_in[++page_in_index]); in_page_bytes_left = PAGE_CACHE_SIZE; in_offset = 0; @@ -346,6 +352,8 @@ cont: out_len = lzo1x_worst_compress(PAGE_CACHE_SIZE); ret = lzo1x_decompress_safe(buf, in_len, workspace->buf, &out_len); + if (need_unmap) + kunmap(pages_in[page_in_index - 1]); if (ret != LZO_E_OK) { printk(KERN_WARNING "btrfs decompress failed\n"); ret = -1; @@ -363,8 +371,7 @@ cont: break; } done: - if (data_in) - kunmap(pages_in[page_in_index]); + kunmap(pages_in[page_in_index]); return ret; } -- cgit v1.2.3-70-g09d2 From 9b3517e9136824346227b7b04f8f7ea1f3a726cc Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 15 Feb 2011 18:14:25 +0000 Subject: Btrfs: make btrfs_rm_device() fail gracefully If shrinking done as part of the online device removal fails add that device back to the allocation list and increment the rw_devices counter. This fixes two bugs: 1) we could have a perfectly good device out of alloc list for no good reason; 2) in the btrfs consisting of two devices, failure in btrfs_rm_device() could lead to a situation where it was impossible to remove any of the devices because of the "unable to remove the only writeable device" error. Signed-off-by: Ilya Dryomov Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index dadaaa8005c..f31c33119bb 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1337,11 +1337,11 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) ret = btrfs_shrink_device(device, 0); if (ret) - goto error_brelse; + goto error_undo; ret = btrfs_rm_dev_item(root->fs_info->chunk_root, device); if (ret) - goto error_brelse; + goto error_undo; device->in_fs_metadata = 0; @@ -1415,6 +1415,13 @@ out: mutex_unlock(&root->fs_info->volume_mutex); mutex_unlock(&uuid_mutex); return ret; +error_undo: + if (device->writeable) { + list_add(&device->dev_alloc_list, + &root->fs_info->fs_devices->alloc_list); + root->fs_info->fs_devices->rw_devices++; + } + goto error_brelse; } /* -- cgit v1.2.3-70-g09d2 From fb01aa85b8b29c1a4e1f4a28ea54175de6bf7559 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 15 Feb 2011 18:12:57 +0000 Subject: Btrfs: set FMODE_EXCL in btrfs_device->mode This fixes a bug introduced in d4d77629, where the device added online (and therefore initialized via btrfs_init_new_device()) would be left with the positive bdev->bd_holders after unmount. Since d4d77629 we no longer OR FMODE_EXCL explicitly on blkdev_put(), set it in btrfs_device->mode. Signed-off-by: Ilya Dryomov Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index f31c33119bb..94334d95228 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1639,7 +1639,7 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) device->dev_root = root->fs_info->dev_root; device->bdev = bdev; device->in_fs_metadata = 1; - device->mode = 0; + device->mode = FMODE_EXCL; set_blocksize(device->bdev, 4096); if (seeding_dev) { -- cgit v1.2.3-70-g09d2 From d503b30bd648b3cb4e5f50b65d27e389960cc6d9 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 17 Feb 2011 11:32:38 +0100 Subject: netfilter: tproxy: do not assign timewait sockets to skb->sk Assigning a socket in timewait state to skb->sk can trigger kernel oops, e.g. in nfnetlink_log, which does: if (skb->sk) { read_lock_bh(&skb->sk->sk_callback_lock); if (skb->sk->sk_socket && skb->sk->sk_socket->file) ... in the timewait case, accessing sk->sk_callback_lock and sk->sk_socket is invalid. Either all of these spots will need to add a test for sk->sk_state != TCP_TIME_WAIT, or xt_TPROXY must not assign a timewait socket to skb->sk. This does the latter. If a TW socket is found, assign the tproxy nfmark, but skip the skb->sk assignment, thus mimicking behaviour of a '-m socket .. -j MARK/ACCEPT' re-routing rule. The 'SYN to TW socket' case is left unchanged -- we try to redirect to the listener socket. Cc: Balazs Scheidler Cc: KOVACS Krisztian Signed-off-by: Florian Westphal Signed-off-by: Patrick McHardy --- include/net/netfilter/nf_tproxy_core.h | 12 +----------- net/netfilter/nf_tproxy_core.c | 27 ++++++++++++--------------- net/netfilter/xt_TPROXY.c | 22 ++++++++++++++++++++-- net/netfilter/xt_socket.c | 13 +++++++++++-- 4 files changed, 44 insertions(+), 30 deletions(-) diff --git a/include/net/netfilter/nf_tproxy_core.h b/include/net/netfilter/nf_tproxy_core.h index cd85b3bc832..e505358d899 100644 --- a/include/net/netfilter/nf_tproxy_core.h +++ b/include/net/netfilter/nf_tproxy_core.h @@ -201,18 +201,8 @@ nf_tproxy_get_sock_v6(struct net *net, const u8 protocol, } #endif -static inline void -nf_tproxy_put_sock(struct sock *sk) -{ - /* TIME_WAIT inet sockets have to be handled differently */ - if ((sk->sk_protocol == IPPROTO_TCP) && (sk->sk_state == TCP_TIME_WAIT)) - inet_twsk_put(inet_twsk(sk)); - else - sock_put(sk); -} - /* assign a socket to the skb -- consumes sk */ -int +void nf_tproxy_assign_sock(struct sk_buff *skb, struct sock *sk); #endif diff --git a/net/netfilter/nf_tproxy_core.c b/net/netfilter/nf_tproxy_core.c index 4d87befb04c..474d621cbc2 100644 --- a/net/netfilter/nf_tproxy_core.c +++ b/net/netfilter/nf_tproxy_core.c @@ -28,26 +28,23 @@ nf_tproxy_destructor(struct sk_buff *skb) skb->destructor = NULL; if (sk) - nf_tproxy_put_sock(sk); + sock_put(sk); } /* consumes sk */ -int +void nf_tproxy_assign_sock(struct sk_buff *skb, struct sock *sk) { - bool transparent = (sk->sk_state == TCP_TIME_WAIT) ? - inet_twsk(sk)->tw_transparent : - inet_sk(sk)->transparent; - - if (transparent) { - skb_orphan(skb); - skb->sk = sk; - skb->destructor = nf_tproxy_destructor; - return 1; - } else - nf_tproxy_put_sock(sk); - - return 0; + /* assigning tw sockets complicates things; most + * skb->sk->X checks would have to test sk->sk_state first */ + if (sk->sk_state == TCP_TIME_WAIT) { + inet_twsk_put(inet_twsk(sk)); + return; + } + + skb_orphan(skb); + skb->sk = sk; + skb->destructor = nf_tproxy_destructor; } EXPORT_SYMBOL_GPL(nf_tproxy_assign_sock); diff --git a/net/netfilter/xt_TPROXY.c b/net/netfilter/xt_TPROXY.c index 640678f47a2..dcfd57eb9d0 100644 --- a/net/netfilter/xt_TPROXY.c +++ b/net/netfilter/xt_TPROXY.c @@ -33,6 +33,20 @@ #include #include +static bool tproxy_sk_is_transparent(struct sock *sk) +{ + if (sk->sk_state != TCP_TIME_WAIT) { + if (inet_sk(sk)->transparent) + return true; + sock_put(sk); + } else { + if (inet_twsk(sk)->tw_transparent) + return true; + inet_twsk_put(inet_twsk(sk)); + } + return false; +} + static inline __be32 tproxy_laddr4(struct sk_buff *skb, __be32 user_laddr, __be32 daddr) { @@ -141,7 +155,7 @@ tproxy_tg4(struct sk_buff *skb, __be32 laddr, __be16 lport, skb->dev, NFT_LOOKUP_LISTENER); /* NOTE: assign_sock consumes our sk reference */ - if (sk && nf_tproxy_assign_sock(skb, sk)) { + if (sk && tproxy_sk_is_transparent(sk)) { /* This should be in a separate target, but we don't do multiple targets on the same rule yet */ skb->mark = (skb->mark & ~mark_mask) ^ mark_value; @@ -149,6 +163,8 @@ tproxy_tg4(struct sk_buff *skb, __be32 laddr, __be16 lport, pr_debug("redirecting: proto %hhu %pI4:%hu -> %pI4:%hu, mark: %x\n", iph->protocol, &iph->daddr, ntohs(hp->dest), &laddr, ntohs(lport), skb->mark); + + nf_tproxy_assign_sock(skb, sk); return NF_ACCEPT; } @@ -306,7 +322,7 @@ tproxy_tg6_v1(struct sk_buff *skb, const struct xt_action_param *par) par->in, NFT_LOOKUP_LISTENER); /* NOTE: assign_sock consumes our sk reference */ - if (sk && nf_tproxy_assign_sock(skb, sk)) { + if (sk && tproxy_sk_is_transparent(sk)) { /* This should be in a separate target, but we don't do multiple targets on the same rule yet */ skb->mark = (skb->mark & ~tgi->mark_mask) ^ tgi->mark_value; @@ -314,6 +330,8 @@ tproxy_tg6_v1(struct sk_buff *skb, const struct xt_action_param *par) pr_debug("redirecting: proto %hhu %pI6:%hu -> %pI6:%hu, mark: %x\n", tproto, &iph->saddr, ntohs(hp->source), laddr, ntohs(lport), skb->mark); + + nf_tproxy_assign_sock(skb, sk); return NF_ACCEPT; } diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c index 00d6ae83830..9cc46356b57 100644 --- a/net/netfilter/xt_socket.c +++ b/net/netfilter/xt_socket.c @@ -35,6 +35,15 @@ #include #endif +static void +xt_socket_put_sk(struct sock *sk) +{ + if (sk->sk_state == TCP_TIME_WAIT) + inet_twsk_put(inet_twsk(sk)); + else + sock_put(sk); +} + static int extract_icmp4_fields(const struct sk_buff *skb, u8 *protocol, @@ -164,7 +173,7 @@ socket_match(const struct sk_buff *skb, struct xt_action_param *par, (sk->sk_state == TCP_TIME_WAIT && inet_twsk(sk)->tw_transparent)); - nf_tproxy_put_sock(sk); + xt_socket_put_sk(sk); if (wildcard || !transparent) sk = NULL; @@ -298,7 +307,7 @@ socket_mt6_v1(const struct sk_buff *skb, struct xt_action_param *par) (sk->sk_state == TCP_TIME_WAIT && inet_twsk(sk)->tw_transparent)); - nf_tproxy_put_sock(sk); + xt_socket_put_sk(sk); if (wildcard || !transparent) sk = NULL; -- cgit v1.2.3-70-g09d2 From 5990378b393429244559f4750f2ee3a50929b932 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 11 Feb 2011 10:00:02 +0200 Subject: usb: musb: fix build breakage commit 0662481855c389b75a0a54c32870cc90563d80a9 (usb: musb: disable double buffering when it's broken), introduced a compile error when gadget API is disabled. Fix it. Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index d74a8113ae7..e6400be8a0f 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -488,6 +488,15 @@ struct musb { unsigned set_address:1; unsigned test_mode:1; unsigned softconnect:1; + + u8 address; + u8 test_mode_nr; + u16 ackpend; /* ep0 */ + enum musb_g_ep0_state ep0_state; + struct usb_gadget g; /* the gadget */ + struct usb_gadget_driver *gadget_driver; /* its driver */ +#endif + /* * FIXME: Remove this flag. * @@ -501,14 +510,6 @@ struct musb { */ unsigned double_buffer_not_ok:1 __deprecated; - u8 address; - u8 test_mode_nr; - u16 ackpend; /* ep0 */ - enum musb_g_ep0_state ep0_state; - struct usb_gadget g; /* the gadget */ - struct usb_gadget_driver *gadget_driver; /* its driver */ -#endif - struct musb_hdrc_config *config; #ifdef MUSB_CONFIG_PROC_FS -- cgit v1.2.3-70-g09d2 From b193b412e62b134adf69af286c7e7f8e99259350 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 11 Feb 2011 16:57:08 +0100 Subject: usb: musb: omap2430: fix kernel panic on reboot Cancel idle timer in musb_platform_exit. The idle timer could trigger after clock had been disabled leading to kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37. The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled later, and only if compiled as a module, and the offending memory access has moved) but the timer should be cancelled nonetheless. Rebooting... musb_hdrc musb_hdrc: remove, state 4 usb usb1: USB disconnect, address 1 musb_hdrc musb_hdrc: USB bus 1 deregistered Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 Internal error: : 1028 [#1] PREEMPT last sysfs file: /sys/kernel/uevent_seqnum Modules linked in: CPU: 0 Not tainted (2.6.37+ #6) PC is at musb_do_idle+0x24/0x138 LR is at musb_do_idle+0x18/0x138 pc : [] lr : [] psr: 80000193 sp : cf2bdd80 ip : cf2bdd80 fp : c048a20c r10: c048a60c r9 : c048a40c r8 : cf85e110 r7 : cf2bc000 r6 : 40000113 r5 : c0489800 r4 : cf85e110 r3 : 00000004 r2 : 00000006 r1 : fa0ab000 r0 : cf8a7000 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8faac019 DAC: 00000015 Process reboot (pid: 769, stack limit = 0xcf2bc2f0) Stack: (0xcf2bdd80 to 0xcf2be000) dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8 dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000 ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000 de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608 de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8 dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000 dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08 df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18 df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28 df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08 df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80 df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004 dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000 dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001 dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000 [] (musb_do_idle+0x24/0x138) from [] (run_timer_softirq+0x1a8/0x26) [] (run_timer_softirq+0x1a8/0x26c) from [] (__do_softirq+0x88/0x13) [] (__do_softirq+0x88/0x138) from [] (irq_exit+0x44/0x98) [] (irq_exit+0x44/0x98) from [] (asm_do_IRQ+0x7c/0xa0) [] (asm_do_IRQ+0x7c/0xa0) from [] (__irq_svc+0x48/0xa8) Exception stack(0xcf2bde20 to 0xcf2bde68) de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff [] (__irq_svc+0x48/0xa8) from [] (sub_preempt_count+0x0/0xb8) Code: ebf86030 e5940098 e594108c e5902010 (e5d13060) ---[ end trace 3689c0d808f9bf7c ]--- Kernel panic - not syncing: Fatal exception in interrupt Cc: stable@kernel.org Signed-off-by: Johan Hovold Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index a3f12333fc4..bc8badd1689 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -362,6 +362,7 @@ static int omap2430_musb_init(struct musb *musb) static int omap2430_musb_exit(struct musb *musb) { + del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); otg_put_transceiver(musb->xceiv); -- cgit v1.2.3-70-g09d2 From 0af320fb4627033e49cbc6e8138e7aa75ab8352a Mon Sep 17 00:00:00 2001 From: Joerg Marx Date: Thu, 17 Feb 2011 16:23:40 +0100 Subject: netfilter: ip6t_LOG: fix a flaw in printing the MAC The flaw was in skipping the second byte in MAC header due to increasing the pointer AND indexed access starting at '1'. Signed-off-by: Joerg Marx Signed-off-by: Patrick McHardy --- net/ipv6/netfilter/ip6t_LOG.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/netfilter/ip6t_LOG.c b/net/ipv6/netfilter/ip6t_LOG.c index 09c88891a75..de338037a73 100644 --- a/net/ipv6/netfilter/ip6t_LOG.c +++ b/net/ipv6/netfilter/ip6t_LOG.c @@ -410,7 +410,7 @@ fallback: if (p != NULL) { sb_add(m, "%02x", *p++); for (i = 1; i < len; i++) - sb_add(m, ":%02x", p[i]); + sb_add(m, ":%02x", *p++); } sb_add(m, " "); -- cgit v1.2.3-70-g09d2 From 3c18e30f87ac5466bddbb05cf955605efd7db025 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 17 Feb 2011 10:26:38 -0500 Subject: USB: add quirks entry for Keytouch QWERTY Panel This patch (as1448) adds a quirks entry for the Keytouch QWERTY Panel firmware, used in the IEC 60945 keyboard. This device crashes during enumeration when the computer asks for its configuration string descriptor. Signed-off-by: Alan Stern Tested-by: kholis CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 44c595432d6..92ce90b8312 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -68,6 +68,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Keytouch QWERTY Panel keyboard */ + { USB_DEVICE(0x0926, 0x3333), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, -- cgit v1.2.3-70-g09d2 From acb52cb1613e1d3c8a8c650717cc51965c60d7d4 Mon Sep 17 00:00:00 2001 From: Maciej Szmigiero Date: Mon, 7 Feb 2011 12:42:36 +0100 Subject: USB: Add Samsung SGH-I500/Android modem ID switch to visor driver [USB]Add Samsung SGH-I500/Android modem ID switch to visor driver Samsung decided to reuse USB ID of its old CDMA phone SGH-I500 for the modem part of some of their Android phones. At least Galaxy Spica is affected. This modem needs ACM driver and does not work with visor driver which binds the conflicting ID for SGH-I500. Because SGH-I500 is pretty an old hardware its best to add switch to visor driver in cause somebody still wants to use that phone with Linux. Note that this is needed only when using the Android phone as modem, not in USB storage or ADB mode. Signed-off-by: Maciej Szmigiero Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/visor.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 15a5d89b7f3..1c11959a7d5 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "visor.h" /* @@ -479,6 +480,17 @@ static int visor_probe(struct usb_serial *serial, dbg("%s", __func__); + /* + * some Samsung Android phones in modem mode have the same ID + * as SPH-I500, but they are ACM devices, so dont bind to them + */ + if (id->idVendor == SAMSUNG_VENDOR_ID && + id->idProduct == SAMSUNG_SPH_I500_ID && + serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM && + serial->dev->descriptor.bDeviceSubClass == + USB_CDC_SUBCLASS_ACM) + return -ENODEV; + if (serial->dev->actconfig->desc.bConfigurationValue != 1) { dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", serial->dev->actconfig->desc.bConfigurationValue); -- cgit v1.2.3-70-g09d2 From 72a012ce0a02c6c616676a24b40ff81d1aaeafda Mon Sep 17 00:00:00 2001 From: Maciej Szmigiero Date: Sat, 5 Feb 2011 21:52:00 +0100 Subject: USB: Add quirk for Samsung Android phone modem My Galaxy Spica needs this quirk when in modem mode, otherwise it causes endless USB bus resets and is unusable in this mode. Unfortunately Samsung decided to reuse ID of its old CDMA phone SGH-I500 for the modem part. That's why in addition to this patch the visor driver must be prevented from binding to SPH-I500 ID, so ACM driver can do that. Signed-off-by: Maciej Szmigiero Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 92ce90b8312..81ce6a8e1d9 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -48,6 +48,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04b4, 0x0526), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Samsung Android phone modem - ID conflict with SPH-I500 */ + { USB_DEVICE(0x04e8, 0x6601), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3-70-g09d2 From 637d11bfb814637ec7b81e878db3ffea6408a89a Mon Sep 17 00:00:00 2001 From: Luben Tuikov Date: Fri, 11 Feb 2011 11:33:10 -0800 Subject: USB: Reset USB 3.0 devices on (re)discovery If the device isn't reset, the XHCI HCD sends SET ADDRESS to address 0 while the device is already in Addressed state, and the request is dropped on the floor as it is addressed to the default address. This sequence of events, which this patch fixes looks like this: usb_reset_and_verify_device() hub_port_init() hub_set_address() SET_ADDRESS to 0 with 1 usb_get_device_descriptor(udev, 8) usb_get_device_descriptor(udev, 18) descriptors_changed() --> goto re_enumerate: hub_port_logical_disconnect() kick_khubd() And then: hub_events() hub_port_connect_change() usb_disconnect() usb_disable_device() new device struct sets device state to Powered choose_address() hub_port_init() <-- no reset, but SET ADDRESS to 0 with 1, timeout! The solution is to always reset the device in hub_port_init() to put it in a known state. Signed-off-by: Luben Tuikov Cc: Sarah Sharp Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d041c6826e4..0f299b7aad6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2681,17 +2681,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - if (!udev->config && oldspeed == USB_SPEED_SUPER) { - /* Don't reset USB 3.0 devices during an initial setup */ - usb_set_device_state(udev, USB_STATE_DEFAULT); - } else { - /* Reset the device; full speed may morph to high speed */ - /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ - retval = hub_port_reset(hub, port1, udev, delay); - if (retval < 0) /* error or disconnect */ - goto fail; - /* success, speed is known */ - } + /* Reset the device; full speed may morph to high speed */ + /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ + retval = hub_port_reset(hub, port1, udev, delay); + if (retval < 0) /* error or disconnect */ + goto fail; + /* success, speed is known */ + retval = -ENODEV; if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) { -- cgit v1.2.3-70-g09d2 From 38237fd2be9421c104f84cc35665097bdce89013 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Feb 2011 15:55:07 +0100 Subject: USB: serial/usb_wwan, fix tty NULL dereference tty_port_tty_get may return without any problems NULL. Handle this case and do not oops in usb_wwan_indat_callback by dereferencing it. The oops: Unable to handle kernel paging request for data at address 0x000000d8 Faulting instruction address: 0xc0175b3c Oops: Kernel access of bad area, sig: 11 [#1] PowerPC 40x Platform last sysfs file: /sys/devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:09.2/usb1/idVendor Modules linked in: NIP: c0175b3c LR: c0175e7c CTR: c0215c90 REGS: c77f7d50 TRAP: 0300 Not tainted (2.6.37-rc5) MSR: 00021030 CR: 88482028 XER: 2000005f DEAR: 000000d8, ESR: 00000000 TASK = c7141b90[1149] 'wvdial' THREAD: c2750000 GPR00: 00021030 c77f7e00 c7141b90 00000000 0000000e 00000000 0000000e c0410680 GPR08: c683db00 00000000 00000001 c03c81f8 88482028 10073ef4 ffffffb9 ffffff94 GPR16: 00000000 fde036c0 00200200 00100100 00000001 ffffff8d c34fabcc 00000000 GPR24: c71120d4 00000000 00000000 0000000e 00021030 00000000 00000000 0000000e NIP [c0175b3c] tty_buffer_request_room+0x2c/0x194 LR [c0175e7c] tty_insert_flip_string_fixed_flag+0x3c/0xb0 Call Trace: [c77f7e00] [00000003] 0x3 (unreliable) [c77f7e30] [c0175e7c] tty_insert_flip_string_fixed_flag+0x3c/0xb0 [c77f7e60] [c0215df4] usb_wwan_indat_callback+0x164/0x170 ... References: https://bugzilla.kernel.org/show_bug.cgi?id=24582 Cc: Amit Shah Cc: baoyb Signed-off-by: Jiri Slaby Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index b004b2a485c..9c014e2ecd6 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -295,12 +295,15 @@ static void usb_wwan_indat_callback(struct urb *urb) __func__, status, endpoint); } else { tty = tty_port_tty_get(&port->port); - if (urb->actual_length) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); - } else - dbg("%s: empty read urb received", __func__); - tty_kref_put(tty); + if (tty) { + if (urb->actual_length) { + tty_insert_flip_string(tty, data, + urb->actual_length); + tty_flip_buffer_push(tty); + } else + dbg("%s: empty read urb received", __func__); + tty_kref_put(tty); + } /* Resubmit urb so we continue receiving */ if (status != -ESHUTDOWN) { -- cgit v1.2.3-70-g09d2 From e1dc5157c574e7249dc1cd072fde2e48b3011533 Mon Sep 17 00:00:00 2001 From: Jon Thomas Date: Wed, 16 Feb 2011 11:02:34 -0500 Subject: sierra: add new ID for Airprime/Sierra USB IP modem I picked up a new Sierra usb 308 (At&t Shockwave) on 2/2011 and the vendor code is 0x0f3d Looking up vendor and product id's I see: 0f3d Airprime, Incorporated 0112 CDMA 1xEVDO PC Card, PC 5220 Sierra and Airprime are somehow related and I'm guessing the At&t usb 308 might be have some common hardware with the AirPrime SL809x. Signed-off-by: Jon Thomas Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 7481ff8a49e..0457813eebe 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -301,6 +301,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, + { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */ + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */ { } -- cgit v1.2.3-70-g09d2 From 19b9a83e214d3d3ac52a56daca5ea0d033ca47bc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 11 Feb 2011 16:57:08 +0100 Subject: USB: musb: omap2430: fix kernel panic on reboot Cancel idle timer in musb_platform_exit. The idle timer could trigger after clock had been disabled leading to kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37. The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled later, and only if compiled as a module, and the offending memory access has moved) but the timer should be cancelled nonetheless. Rebooting... musb_hdrc musb_hdrc: remove, state 4 usb usb1: USB disconnect, address 1 musb_hdrc musb_hdrc: USB bus 1 deregistered Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 Internal error: : 1028 [#1] PREEMPT last sysfs file: /sys/kernel/uevent_seqnum Modules linked in: CPU: 0 Not tainted (2.6.37+ #6) PC is at musb_do_idle+0x24/0x138 LR is at musb_do_idle+0x18/0x138 pc : [] lr : [] psr: 80000193 sp : cf2bdd80 ip : cf2bdd80 fp : c048a20c r10: c048a60c r9 : c048a40c r8 : cf85e110 r7 : cf2bc000 r6 : 40000113 r5 : c0489800 r4 : cf85e110 r3 : 00000004 r2 : 00000006 r1 : fa0ab000 r0 : cf8a7000 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8faac019 DAC: 00000015 Process reboot (pid: 769, stack limit = 0xcf2bc2f0) Stack: (0xcf2bdd80 to 0xcf2be000) dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8 dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000 ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000 de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608 de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8 dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000 dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08 df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18 df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28 df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08 df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80 df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004 dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000 dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001 dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000 [] (musb_do_idle+0x24/0x138) from [] (run_timer_softirq+0x1a8/0x26) [] (run_timer_softirq+0x1a8/0x26c) from [] (__do_softirq+0x88/0x13) [] (__do_softirq+0x88/0x138) from [] (irq_exit+0x44/0x98) [] (irq_exit+0x44/0x98) from [] (asm_do_IRQ+0x7c/0xa0) [] (asm_do_IRQ+0x7c/0xa0) from [] (__irq_svc+0x48/0xa8) Exception stack(0xcf2bde20 to 0xcf2bde68) de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff [] (__irq_svc+0x48/0xa8) from [] (sub_preempt_count+0x0/0xb8) Code: ebf86030 e5940098 e594108c e5902010 (e5d13060) ---[ end trace 3689c0d808f9bf7c ]--- Kernel panic - not syncing: Fatal exception in interrupt Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index a3f12333fc4..bc8badd1689 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -362,6 +362,7 @@ static int omap2430_musb_init(struct musb *musb) static int omap2430_musb_exit(struct musb *musb) { + del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); otg_put_transceiver(musb->xceiv); -- cgit v1.2.3-70-g09d2 From 9ce4f80fb67b47b96c647ac6280a06dbd4bb50d2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Feb 2011 14:39:36 -0800 Subject: Revert "USB: Reset USB 3.0 devices on (re)discovery" This reverts commit 637d11bfb814637ec7b81e878db3ffea6408a89a. Sarah wants to tweak it some more before it's applied to the tree. Cc: Luben Tuikov Cc: Sarah Sharp Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0f299b7aad6..d041c6826e4 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2681,13 +2681,17 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - /* Reset the device; full speed may morph to high speed */ - /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ - retval = hub_port_reset(hub, port1, udev, delay); - if (retval < 0) /* error or disconnect */ - goto fail; - /* success, speed is known */ - + if (!udev->config && oldspeed == USB_SPEED_SUPER) { + /* Don't reset USB 3.0 devices during an initial setup */ + usb_set_device_state(udev, USB_STATE_DEFAULT); + } else { + /* Reset the device; full speed may morph to high speed */ + /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ + retval = hub_port_reset(hub, port1, udev, delay); + if (retval < 0) /* error or disconnect */ + goto fail; + /* success, speed is known */ + } retval = -ENODEV; if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) { -- cgit v1.2.3-70-g09d2 From 4e8b65f606b9e4e6922fd17a772fe3e69cc5553b Mon Sep 17 00:00:00 2001 From: Rakesh Iyer Date: Fri, 18 Feb 2011 08:38:02 -0800 Subject: Input: tegra-kbc - add function keymap Add Fn keymap support to allow for internal processing of Fn keys. Signed-off-by: Rakesh Iyer Signed-off-by: Dmitry Torokhov --- arch/arm/mach-tegra/include/mach/kbc.h | 1 + drivers/input/keyboard/tegra-kbc.c | 62 ++++++++++++++++++++++++++++++++-- 2 files changed, 60 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h index 66ad2760c62..04c779832c7 100644 --- a/arch/arm/mach-tegra/include/mach/kbc.h +++ b/arch/arm/mach-tegra/include/mach/kbc.h @@ -57,5 +57,6 @@ struct tegra_kbc_platform_data { const struct matrix_keymap_data *keymap_data; bool wakeup; + bool use_fn_map; }; #endif diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index ac471b77c18..99ce9032d08 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -71,8 +71,9 @@ struct tegra_kbc { spinlock_t lock; unsigned int repoll_dly; unsigned long cp_dly_jiffies; + bool use_fn_map; const struct tegra_kbc_platform_data *pdata; - unsigned short keycode[KBC_MAX_KEY]; + unsigned short keycode[KBC_MAX_KEY * 2]; unsigned short current_keys[KBC_MAX_KPENT]; unsigned int num_pressed_keys; struct timer_list timer; @@ -178,6 +179,40 @@ static const u32 tegra_kbc_default_keymap[] = { KEY(15, 5, KEY_F2), KEY(15, 6, KEY_CAPSLOCK), KEY(15, 7, KEY_F6), + + /* Software Handled Function Keys */ + KEY(20, 0, KEY_KP7), + + KEY(21, 0, KEY_KP9), + KEY(21, 1, KEY_KP8), + KEY(21, 2, KEY_KP4), + KEY(21, 4, KEY_KP1), + + KEY(22, 1, KEY_KPSLASH), + KEY(22, 2, KEY_KP6), + KEY(22, 3, KEY_KP5), + KEY(22, 4, KEY_KP3), + KEY(22, 5, KEY_KP2), + KEY(22, 7, KEY_KP0), + + KEY(27, 1, KEY_KPASTERISK), + KEY(27, 3, KEY_KPMINUS), + KEY(27, 4, KEY_KPPLUS), + KEY(27, 5, KEY_KPDOT), + + KEY(28, 5, KEY_VOLUMEUP), + + KEY(29, 3, KEY_HOME), + KEY(29, 4, KEY_END), + KEY(29, 5, KEY_BRIGHTNESSDOWN), + KEY(29, 6, KEY_VOLUMEDOWN), + KEY(29, 7, KEY_BRIGHTNESSUP), + + KEY(30, 0, KEY_NUMLOCK), + KEY(30, 1, KEY_SCROLLLOCK), + KEY(30, 2, KEY_MUTE), + + KEY(31, 4, KEY_HELP), }; static const struct matrix_keymap_data tegra_kbc_default_keymap_data = { @@ -224,6 +259,7 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) unsigned int i; unsigned int num_down = 0; unsigned long flags; + bool fn_keypress = false; spin_lock_irqsave(&kbc->lock, flags); for (i = 0; i < KBC_MAX_KPENT; i++) { @@ -237,11 +273,28 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) MATRIX_SCAN_CODE(row, col, KBC_ROW_SHIFT); scancodes[num_down] = scancode; - keycodes[num_down++] = kbc->keycode[scancode]; + keycodes[num_down] = kbc->keycode[scancode]; + /* If driver uses Fn map, do not report the Fn key. */ + if ((keycodes[num_down] == KEY_FN) && kbc->use_fn_map) + fn_keypress = true; + else + num_down++; } val >>= 8; } + + /* + * If the platform uses Fn keymaps, translate keys on a Fn keypress. + * Function keycodes are KBC_MAX_KEY apart from the plain keycodes. + */ + if (fn_keypress) { + for (i = 0; i < num_down; i++) { + scancodes[i] += KBC_MAX_KEY; + keycodes[i] = kbc->keycode[scancodes[i]]; + } + } + spin_unlock_irqrestore(&kbc->lock, flags); tegra_kbc_report_released_keys(kbc->idev, @@ -594,8 +647,11 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev) input_dev->keycode = kbc->keycode; input_dev->keycodesize = sizeof(kbc->keycode[0]); - input_dev->keycodemax = ARRAY_SIZE(kbc->keycode); + input_dev->keycodemax = KBC_MAX_KEY; + if (pdata->use_fn_map) + input_dev->keycodemax *= 2; + kbc->use_fn_map = pdata->use_fn_map; keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data; matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT, input_dev->keycode, input_dev->keybit); -- cgit v1.2.3-70-g09d2 From 05e7c99136554789e4cc060a63334ccaa08ad62d Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 18 Feb 2011 09:05:08 +0100 Subject: mac80211: fix conn_mon_timer running after disassociate Low level driver could pass rx frames to us after disassociate, what can lead to run conn_mon_timer by ieee80211_sta_rx_notify(). That is obviously wrong, but nothing happens until we unload modules and resources are used after free. If kernel debugging is enabled following warning could be observed: WARNING: at lib/debugobjects.c:259 debug_print_object+0x65/0x70() Hardware name: HP xw8600 Workstation ODEBUG: free active (active state 0) object type: timer_list Modules linked in: iwlagn(-) iwlcore mac80211 cfg80211 aes_x86_64 aes_generic fuse cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ext3 jbd dm_mirror dm_region_hash dm_log dm_mod uinput hp_wmi sparse_keymap sg wmi arc4 microcode serio_raw ecb tg3 shpchp rfkill ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif firewire_ohci firewire_core crc_itu_t mptsas mptscsih mptbase scsi_transport_sas ahci libahci pata_acpi ata_generic ata_piix floppy nouveau ttm drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: cfg80211] Pid: 13827, comm: rmmod Tainted: G W 2.6.38-rc4-wl+ #22 Call Trace: [] ? warn_slowpath_common+0x7f/0xc0 [] ? warn_slowpath_fmt+0x46/0x50 [] ? debug_print_object+0x65/0x70 [] ? debug_check_no_obj_freed+0x125/0x210 [] ? debug_check_no_locks_freed+0xf7/0x170 [] ? kfree+0xc2/0x2f0 [] ? netdev_release+0x45/0x60 [] ? device_release+0x27/0xa0 [] ? kobject_release+0x8d/0x1a0 [] ? kobject_release+0x0/0x1a0 [] ? kref_put+0x37/0x70 [] ? kobject_put+0x27/0x60 [] ? netdev_run_todo+0x1ab/0x270 [] ? rtnl_unlock+0xe/0x10 [] ? ieee80211_unregister_hw+0x58/0x120 [mac80211] [] ? iwl_pci_remove+0xdb/0x22a [iwlagn] [] ? pci_device_remove+0x52/0x120 [] ? __device_release_driver+0x75/0xe0 [] ? driver_detach+0xd8/0xe0 [] ? bus_remove_driver+0x91/0x100 [] ? driver_unregister+0x62/0xa0 [] ? pci_unregister_driver+0x44/0xa0 [] ? iwl_exit+0x15/0x1c [iwlagn] [] ? sys_delete_module+0x1a2/0x270 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] ? system_call_fastpath+0x16/0x1b Acked-by: Johannes Berg Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 45fbb9e3374..c9ceb4d57ab 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1033,6 +1033,12 @@ void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata, if (is_multicast_ether_addr(hdr->addr1)) return; + /* + * In case we receive frames after disassociation. + */ + if (!sdata->u.mgd.associated) + return; + ieee80211_sta_reset_conn_monitor(sdata); } -- cgit v1.2.3-70-g09d2 From 00781a74ee34222ee3cdc36d4f3d9c844dddbd27 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Fri, 18 Feb 2011 14:27:09 +0100 Subject: wireless: rt2x00: rt2800pci.c: add two ids taken two RT35XX EDIMAX from DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217 Signed-off-by: Xose Vazquez Perez Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index aa97971a38a..7951cdaa9c0 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1065,6 +1065,8 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = { { PCI_DEVICE(0x1814, 0x3390), PCI_DEVICE_DATA(&rt2800pci_ops) }, #endif #ifdef CONFIG_RT2800PCI_RT35XX + { PCI_DEVICE(0x1432, 0x7711), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7722), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) }, -- cgit v1.2.3-70-g09d2 From 28bec7b845e10b68e6ba1ade5de0fc566690fc61 Mon Sep 17 00:00:00 2001 From: Nikolay Ledovskikh Date: Fri, 18 Feb 2011 19:59:53 +0300 Subject: ath5k: Correct channel setting for AR2317 chip Correct channel setting function must be used for AR2317. When I tested ahb patch on bullet2 all seemed to work fine, but it couldn't connect another host (using ibss for example). During an analysis I observed that it's transmitting on another channel. I looked into madwifi code and understood that the problem is in channel setting function. So atheros RF2317 not fully handled in the current ath5k version and must be patched. Signed-off-by: Nikolay Ledovskikh Acked-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/phy.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 78c26fdccad..c44111fc98b 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1253,6 +1253,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah, case AR5K_RF5111: ret = ath5k_hw_rf5111_channel(ah, channel); break; + case AR5K_RF2317: case AR5K_RF2425: ret = ath5k_hw_rf2425_channel(ah, channel); break; -- cgit v1.2.3-70-g09d2 From c1ee6264280e740a9d3ff3feef38642cf0a57013 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 17 Feb 2011 17:45:15 +0100 Subject: genirq: Prevent access beyond allocated_irqs bitmap Lars-Peter Clausen pointed out: I stumbled upon this while looking through the existing archs using SPARSE_IRQ. Even with SPARSE_IRQ the NR_IRQS is still the upper limit for the number of IRQs. Both PXA and MMP set NR_IRQS to IRQ_BOARD_START, with IRQ_BOARD_START being the number of IRQs used by the core. In various machine files the nr_irqs field of the ARM machine defintion struct is then set to "IRQ_BOARD_START + NR_BOARD_IRQS". As a result "nr_irqs" will greater then NR_IRQS which then again causes the "allocated_irqs" bitmap in the core irq code to be accessed beyond its size overwriting unrelated data. The core code really misses a sanity check there. This went unnoticed so far as by chance the compiler/linker places data behind that bitmap which gets initialized later on those affected platforms. So the obvious fix would be to add a sanity check in early_irq_init() and break all affected platforms. Though that check wants to be backported to stable as well, which will require to fix all known problematic platforms and probably some more yet not known ones as well. Lots of churn. A way simpler solution is to allocate a slightly larger bitmap and avoid the whole churn w/o breaking anything. Add a few warnings when an arch returns utter crap. Reported-by: Lars-Peter Clausen Signed-off-by: Thomas Gleixner Cc: stable@kernel.org # .37 Cc: Haojian Zhuang Cc: Eric Miao Cc: Peter Zijlstra --- kernel/irq/internals.h | 6 ++++++ kernel/irq/irqdesc.c | 11 ++++++++++- kernel/irq/resend.c | 2 +- 3 files changed, 17 insertions(+), 2 deletions(-) diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h index 4571ae7e085..99c3bc8a6fb 100644 --- a/kernel/irq/internals.h +++ b/kernel/irq/internals.h @@ -3,6 +3,12 @@ */ #include +#ifdef CONFIG_SPARSE_IRQ +# define IRQ_BITMAP_BITS (NR_IRQS + 8196) +#else +# define IRQ_BITMAP_BITS NR_IRQS +#endif + extern int noirqdebug; #define irq_data_to_desc(data) container_of(data, struct irq_desc, irq_data) diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c index 282f20230e6..2039bea31bd 100644 --- a/kernel/irq/irqdesc.c +++ b/kernel/irq/irqdesc.c @@ -94,7 +94,7 @@ int nr_irqs = NR_IRQS; EXPORT_SYMBOL_GPL(nr_irqs); static DEFINE_MUTEX(sparse_irq_lock); -static DECLARE_BITMAP(allocated_irqs, NR_IRQS); +static DECLARE_BITMAP(allocated_irqs, IRQ_BITMAP_BITS); #ifdef CONFIG_SPARSE_IRQ @@ -217,6 +217,15 @@ int __init early_irq_init(void) initcnt = arch_probe_nr_irqs(); printk(KERN_INFO "NR_IRQS:%d nr_irqs:%d %d\n", NR_IRQS, nr_irqs, initcnt); + if (WARN_ON(nr_irqs > IRQ_BITMAP_BITS)) + nr_irqs = IRQ_BITMAP_BITS; + + if (WARN_ON(initcnt > IRQ_BITMAP_BITS)) + initcnt = IRQ_BITMAP_BITS; + + if (initcnt > nr_irqs) + nr_irqs = initcnt; + for (i = 0; i < initcnt; i++) { desc = alloc_desc(i, node); set_bit(i, allocated_irqs); diff --git a/kernel/irq/resend.c b/kernel/irq/resend.c index 891115a929a..dc49358b73f 100644 --- a/kernel/irq/resend.c +++ b/kernel/irq/resend.c @@ -23,7 +23,7 @@ #ifdef CONFIG_HARDIRQS_SW_RESEND /* Bitmap to handle software resend of interrupts: */ -static DECLARE_BITMAP(irqs_resend, NR_IRQS); +static DECLARE_BITMAP(irqs_resend, IRQ_BITMAP_BITS); /* * Run software resends of IRQ's -- cgit v1.2.3-70-g09d2 From 6d83f94db95cfe65d2a6359cccdf61cf087c2598 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 18 Feb 2011 23:27:23 +0100 Subject: genirq: Disable the SHIRQ_DEBUG call in request_threaded_irq for now With CONFIG_SHIRQ_DEBUG=y we call a newly installed interrupt handler in request_threaded_irq(). The original implementation (commit a304e1b8) called the handler _BEFORE_ it was installed, but that caused problems with handlers calling disable_irq_nosync(). See commit 377bf1e4. It's braindead in the first place to call disable_irq_nosync in shared handlers, but .... Moving this call after we installed the handler looks innocent, but it is very subtle broken on SMP. Interrupt handlers rely on the fact, that the irq core prevents reentrancy. Now this debug call violates that promise because we run the handler w/o the IRQ_INPROGRESS protection - which we cannot apply here because that would result in a possibly forever masked interrupt line. A concurrent real hardware interrupt on a different CPU results in handler reentrancy and can lead to complete wreckage, which was unfortunately observed in reality and took a fricking long time to debug. Leave the code here for now. We want this debug feature, but that's not easy to fix. We really should get rid of those disable_irq_nosync() abusers and remove that function completely. Signed-off-by: Thomas Gleixner Cc: Anton Vorontsov Cc: David Woodhouse Cc: Arjan van de Ven Cc: stable@kernel.org # .28 -> .37 --- kernel/irq/manage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 0caa59f747d..9033c1c7082 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1100,7 +1100,7 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler, if (retval) kfree(action); -#ifdef CONFIG_DEBUG_SHIRQ +#ifdef CONFIG_DEBUG_SHIRQ_FIXME if (!retval && (irqflags & IRQF_SHARED)) { /* * It's a shared IRQ -- the driver ought to be prepared for it -- cgit v1.2.3-70-g09d2 From d5bb2923cfa0a29c5854f9618703ff60849b949e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 13 Feb 2011 13:12:10 +0100 Subject: drivers/char/pcmcia/ipwireless/main.c: Convert release_resource to release_region/release_mem_region Request_region should be used with release_region, not release_resource. This patch contains a number of changes, related to calls to request_region, request_mem_region, and the associated error handling code. 1. For the call to request_region, the variable io_resource storing the result is dropped. The call to release_resource at the end of the function is changed to a call to release_region with the first two arguments of request_region as its arguments. The same call to release_region is also added to release_ipwireless. 2. The first call to request_mem_region is now tested and ret is set to -EBUSY if the the call has failed. This call was associated with the initialization of ipw->attr_memory. But the error handling code was testing ipw->common_memory. The definition of release_ipwireless also suggests that this call should be associated with ipw->common_memory, not ipw->attr_memory. 3. The second call to request_mem_region is now tested and ret is set to -EBUSY if the the call has failed. 4. The various gotos to the error handling code is adjusted so that there is no need for ifs. 5. Return the value stored in the ret variable rather than -1. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,E; @@ ( *x = request_region(...) | *x = request_mem_region(...) ) ... when != release_region(x) when != x = E * release_resource(x); // Signed-off-by: Julia Lawall Signed-off-by: Jiri Kosina Signed-off-by: Dominik Brodowski --- drivers/char/pcmcia/ipwireless/main.c | 52 +++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 20 deletions(-) diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 94b8eb4d691..444155a305a 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -78,7 +78,6 @@ static void signalled_reboot_callback(void *callback_data) static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) { struct ipw_dev *ipw = priv_data; - struct resource *io_resource; int ret; p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; @@ -92,9 +91,12 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) if (ret) return ret; - io_resource = request_region(p_dev->resource[0]->start, - resource_size(p_dev->resource[0]), - IPWIRELESS_PCCARD_NAME); + if (!request_region(p_dev->resource[0]->start, + resource_size(p_dev->resource[0]), + IPWIRELESS_PCCARD_NAME)) { + ret = -EBUSY; + goto exit; + } p_dev->resource[2]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE; @@ -105,22 +107,25 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr); if (ret != 0) - goto exit2; + goto exit1; ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100; - ipw->attr_memory = ioremap(p_dev->resource[2]->start, + ipw->common_memory = ioremap(p_dev->resource[2]->start, resource_size(p_dev->resource[2])); - request_mem_region(p_dev->resource[2]->start, - resource_size(p_dev->resource[2]), - IPWIRELESS_PCCARD_NAME); + if (!request_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2]), + IPWIRELESS_PCCARD_NAME)) { + ret = -EBUSY; + goto exit2; + } p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | WIN_ENABLE; p_dev->resource[3]->end = 0; /* this used to be 0x1000 */ ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0); if (ret != 0) - goto exit2; + goto exit3; ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0); if (ret != 0) @@ -128,23 +133,28 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) ipw->attr_memory = ioremap(p_dev->resource[3]->start, resource_size(p_dev->resource[3])); - request_mem_region(p_dev->resource[3]->start, - resource_size(p_dev->resource[3]), - IPWIRELESS_PCCARD_NAME); + if (!request_mem_region(p_dev->resource[3]->start, + resource_size(p_dev->resource[3]), + IPWIRELESS_PCCARD_NAME)) { + ret = -EBUSY; + goto exit4; + } return 0; +exit4: + iounmap(ipw->attr_memory); exit3: + release_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); exit2: - if (ipw->common_memory) { - release_mem_region(p_dev->resource[2]->start, - resource_size(p_dev->resource[2])); - iounmap(ipw->common_memory); - } + iounmap(ipw->common_memory); exit1: - release_resource(io_resource); + release_region(p_dev->resource[0]->start, + resource_size(p_dev->resource[0])); +exit: pcmcia_disable_device(p_dev); - return -1; + return ret; } static int config_ipwireless(struct ipw_dev *ipw) @@ -219,6 +229,8 @@ exit: static void release_ipwireless(struct ipw_dev *ipw) { + release_region(ipw->link->resource[0]->start, + resource_size(ipw->link->resource[0])); if (ipw->common_memory) { release_mem_region(ipw->link->resource[2]->start, resource_size(ipw->link->resource[2])); -- cgit v1.2.3-70-g09d2 From 5b703683b6cc3cb97bbe6b1b14898b273eb59279 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 4 Feb 2011 09:03:43 +0100 Subject: pcmcia vs. MECR on pxa25x/sa1111 After 2.6.34 changes, __pxa2xx_drv_pcmcia_probe() was replaced by sa1111_pcmcia_add(). That unfortunately means that configure_sockets() is not called, leading to MECR not being set properly, leading to strange crashes. Tested on pxa255+sa1111, I do not have lubbock board nearby. Perhaps cleaner solution exists? Signed-off-by: Pavel Machek Signed-off-by: Dominik Brodowski --- drivers/pcmcia/pxa2xx_base.c | 2 +- drivers/pcmcia/pxa2xx_base.h | 1 + drivers/pcmcia/pxa2xx_lubbock.c | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 3755e7c8c71..2c540542b5a 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -215,7 +215,7 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt, } #endif -static void pxa2xx_configure_sockets(struct device *dev) +void pxa2xx_configure_sockets(struct device *dev) { struct pcmcia_low_level *ops = dev->platform_data; /* diff --git a/drivers/pcmcia/pxa2xx_base.h b/drivers/pcmcia/pxa2xx_base.h index bb62ea87b8f..b609b45469e 100644 --- a/drivers/pcmcia/pxa2xx_base.h +++ b/drivers/pcmcia/pxa2xx_base.h @@ -1,3 +1,4 @@ int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt); void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops); +void pxa2xx_configure_sockets(struct device *dev); diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c index b9f8c8fb42b..25afe637c65 100644 --- a/drivers/pcmcia/pxa2xx_lubbock.c +++ b/drivers/pcmcia/pxa2xx_lubbock.c @@ -226,6 +226,7 @@ int pcmcia_lubbock_init(struct sa1111_dev *sadev) lubbock_set_misc_wr((1 << 15) | (1 << 14), 0); pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops); + pxa2xx_configure_sockets(&sadev->dev); ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops, pxa2xx_drv_pcmcia_add_one); } -- cgit v1.2.3-70-g09d2 From 644e6e4a7fa6b11d59f24032997d90ea0d858d03 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Feb 2011 15:46:05 +0000 Subject: cm4000_cs: Fix undefined ops warning Signed-off-by: Alan Cox Signed-off-by: Dominik Brodowski --- drivers/char/pcmcia/cm4000_cs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 777181a2e60..bcbbc71febb 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -830,8 +830,7 @@ static void monitor_card(unsigned long p) test_bit(IS_ANY_T1, &dev->flags))) { DEBUGP(4, dev, "Perform AUTOPPS\n"); set_bit(IS_AUTOPPS_ACT, &dev->flags); - ptsreq.protocol = ptsreq.protocol = - (0x01 << dev->proto); + ptsreq.protocol = (0x01 << dev->proto); ptsreq.flags = 0x01; ptsreq.pts1 = 0x00; ptsreq.pts2 = 0x00; -- cgit v1.2.3-70-g09d2 From 91035f0b7d89291af728b6f3e370c3be58fcbe1b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 18 Feb 2011 22:35:56 +0000 Subject: tcp: fix inet_twsk_deschedule() Eric W. Biederman reported a lockdep splat in inet_twsk_deschedule() This is caused by inet_twsk_purge(), run from process context, and commit 575f4cd5a5b6394577 (net: Use rcu lookups in inet_twsk_purge.) removed the BH disabling that was necessary. Add the BH disabling but fine grained, right before calling inet_twsk_deschedule(), instead of whole function. With help from Linus Torvalds and Eric W. Biederman Reported-by: Eric W. Biederman Signed-off-by: Eric Dumazet CC: Daniel Lezcano CC: Pavel Emelyanov CC: Arnaldo Carvalho de Melo CC: stable (# 2.6.33+) Signed-off-by: David S. Miller --- net/ipv4/inet_timewait_sock.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c index c5af909cf70..3c8dfa16614 100644 --- a/net/ipv4/inet_timewait_sock.c +++ b/net/ipv4/inet_timewait_sock.c @@ -505,7 +505,9 @@ restart: } rcu_read_unlock(); + local_bh_disable(); inet_twsk_deschedule(tw, twdr); + local_bh_enable(); inet_twsk_put(tw); goto restart_rcu; } -- cgit v1.2.3-70-g09d2 From 226111d1fbe611bc7a5ffaa5275ccb41e73fd011 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 18 Feb 2011 13:30:17 +0000 Subject: net: dcb: match dcb_app protocol field with 802.1Qaz spec The dcb_app protocol field is a __u32 however the 802.1Qaz specification defines it as a 16 bit field. This patch brings the structure inline with the spec making it a __u16. CC: Shmulik Ravid Signed-off-by: John Fastabend Signed-off-by: David S. Miller --- include/linux/dcbnl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h index 68cd248f6d3..66900e3c6eb 100644 --- a/include/linux/dcbnl.h +++ b/include/linux/dcbnl.h @@ -101,8 +101,8 @@ struct ieee_pfc { */ struct dcb_app { __u8 selector; - __u32 protocol; __u8 priority; + __u16 protocol; }; struct dcbmsg { -- cgit v1.2.3-70-g09d2 From 2205a6ea93fea76f88b43727fea53f3ce3790d6f Mon Sep 17 00:00:00 2001 From: Jiri Bohac Date: Thu, 17 Feb 2011 13:12:08 +0000 Subject: sctp: fix reporting of unknown parameters commit 5fa782c2f5ef6c2e4f04d3e228412c9b4a4c8809 re-worked the handling of unknown parameters. sctp_init_cause_fixed() can now return -ENOSPC if there is not enough tailroom in the error chunk skb. When this happens, the error header is not appended to the error chunk. In that case, the payload of the unknown parameter should not be appended either. Signed-off-by: Jiri Bohac Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/sm_make_chunk.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 2cc46f0962c..b23428f3c0d 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -2029,11 +2029,11 @@ static sctp_ierror_t sctp_process_unk_param(const struct sctp_association *asoc, *errp = sctp_make_op_error_fixed(asoc, chunk); if (*errp) { - sctp_init_cause_fixed(*errp, SCTP_ERROR_UNKNOWN_PARAM, - WORD_ROUND(ntohs(param.p->length))); - sctp_addto_chunk_fixed(*errp, - WORD_ROUND(ntohs(param.p->length)), - param.v); + if (!sctp_init_cause_fixed(*errp, SCTP_ERROR_UNKNOWN_PARAM, + WORD_ROUND(ntohs(param.p->length)))) + sctp_addto_chunk_fixed(*errp, + WORD_ROUND(ntohs(param.p->length)), + param.v); } else { /* If there is no memory for generating the ERROR * report as specified, an ABORT will be triggered -- cgit v1.2.3-70-g09d2 From 705773a6656bba66f2a80a44ddaacf9620df8a59 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 3 Feb 2011 14:16:19 +0100 Subject: ocfs2: Fix estimate of necessary credits for mkdir In the rare case that INLINE_DATA, INDEX_DIR, QUOTA, XATTR features are disabled and both the allocation of the directory inode and the allocation of the first directory block need to relink allocation group, there need not be enough credits reserved in a transaction. Fix the estimate. CC: Mark Fasheh Signed-off-by: Jan Kara Signed-off-by: Joel Becker --- fs/ocfs2/journal.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h index 43e56b97f9c..6180da1e37e 100644 --- a/fs/ocfs2/journal.h +++ b/fs/ocfs2/journal.h @@ -405,9 +405,9 @@ static inline int ocfs2_remove_extent_credits(struct super_block *sb) ocfs2_quota_trans_credits(sb); } -/* data block for new dir/symlink, 2 for bitmap updates (bitmap fe + - * bitmap block for the new bit) dx_root update for free list */ -#define OCFS2_DIR_LINK_ADDITIONAL_CREDITS (1 + 2 + 1) +/* data block for new dir/symlink, allocation of directory block, dx_root + * update for free list */ +#define OCFS2_DIR_LINK_ADDITIONAL_CREDITS (1 + OCFS2_SUBALLOC_ALLOC + 1) static inline int ocfs2_add_dir_index_credits(struct super_block *sb) { -- cgit v1.2.3-70-g09d2 From acf3bb007e5636ef4c17505affb0974175108553 Mon Sep 17 00:00:00 2001 From: Tristan Ye Date: Fri, 21 Jan 2011 18:20:18 +0800 Subject: Ocfs2/refcounttree: Fix a bug for refcounttree to writeback clusters in a right number. Current refcounttree codes actually didn't writeback the new pages out in write-back mode, due to a bug of always passing a ZERO number of clusters to 'ocfs2_cow_sync_writeback', the patch tries to pass a proper one in. Signed-off-by: Tristan Ye Cc: stable@kernel.org Signed-off-by: Joel Becker --- fs/ocfs2/refcounttree.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index b5f9160e93e..19ebc5aad39 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -3228,7 +3228,7 @@ static int ocfs2_make_clusters_writable(struct super_block *sb, u32 num_clusters, unsigned int e_flags) { int ret, delete, index, credits = 0; - u32 new_bit, new_len; + u32 new_bit, new_len, orig_num_clusters; unsigned int set_len; struct ocfs2_super *osb = OCFS2_SB(sb); handle_t *handle; @@ -3261,6 +3261,8 @@ static int ocfs2_make_clusters_writable(struct super_block *sb, goto out; } + orig_num_clusters = num_clusters; + while (num_clusters) { ret = ocfs2_get_refcount_rec(ref_ci, context->ref_root_bh, p_cluster, num_clusters, @@ -3348,7 +3350,8 @@ static int ocfs2_make_clusters_writable(struct super_block *sb, * in write-back mode. */ if (context->get_clusters == ocfs2_di_get_clusters) { - ret = ocfs2_cow_sync_writeback(sb, context, cpos, num_clusters); + ret = ocfs2_cow_sync_writeback(sb, context, cpos, + orig_num_clusters); if (ret) mlog_errno(ret); } -- cgit v1.2.3-70-g09d2 From 52c303c56c3638944b5f733e3961dc58eb8c7270 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Mon, 31 Jan 2011 11:31:04 -0800 Subject: ocfs2: Check heartbeat mode for kernel stacks only Commit 2c442719e90a44a6982c033d69df4aae4b167cfa added some checks for proper heartbeat mode when the o2cb stack is running. Unfortunately, it didn't take into account that a userpsace stack could be running. Fix this by only doing the check if o2cb is in use. This patch allows userspace stacks to mount the fs again. Cc: stable@kernel.org Signed-off-by: Mark Fasheh Signed-off-by: Joel Becker --- fs/ocfs2/super.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 38f986d2447..36c423fb063 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1316,7 +1316,7 @@ static int ocfs2_parse_options(struct super_block *sb, struct mount_options *mopt, int is_remount) { - int status; + int status, user_stack = 0; char *p; u32 tmp; @@ -1459,6 +1459,15 @@ static int ocfs2_parse_options(struct super_block *sb, memcpy(mopt->cluster_stack, args[0].from, OCFS2_STACK_LABEL_LEN); mopt->cluster_stack[OCFS2_STACK_LABEL_LEN] = '\0'; + /* + * Open code the memcmp here as we don't have + * an osb to pass to + * ocfs2_userspace_stack(). + */ + if (memcmp(mopt->cluster_stack, + OCFS2_CLASSIC_CLUSTER_STACK, + OCFS2_STACK_LABEL_LEN)) + user_stack = 1; break; case Opt_inode64: mopt->mount_opt |= OCFS2_MOUNT_INODE64; @@ -1514,13 +1523,16 @@ static int ocfs2_parse_options(struct super_block *sb, } } - /* Ensure only one heartbeat mode */ - tmp = mopt->mount_opt & (OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL | - OCFS2_MOUNT_HB_NONE); - if (hweight32(tmp) != 1) { - mlog(ML_ERROR, "Invalid heartbeat mount options\n"); - status = 0; - goto bail; + if (user_stack == 0) { + /* Ensure only one heartbeat mode */ + tmp = mopt->mount_opt & (OCFS2_MOUNT_HB_LOCAL | + OCFS2_MOUNT_HB_GLOBAL | + OCFS2_MOUNT_HB_NONE); + if (hweight32(tmp) != 1) { + mlog(ML_ERROR, "Invalid heartbeat mount options\n"); + status = 0; + goto bail; + } } status = 1; -- cgit v1.2.3-70-g09d2 From 33619f0d3ff715a2a5499520967d526ad931d70d Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 19 Feb 2011 12:35:15 +0100 Subject: pcmcia: re-enable Zoomed Video support Allow drivers to enable Zoomed Video support. Currently, this is only used by out-of-tree drivers (L64020 DVB driver in particular). CC: [for 2.6.37] Signed-off-by: Dominik Brodowski --- drivers/pcmcia/pcmcia_resource.c | 2 ++ include/pcmcia/ds.h | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 0bdda5b3ed5..42fbf1a7557 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -518,6 +518,8 @@ int pcmcia_enable_device(struct pcmcia_device *p_dev) flags |= CONF_ENABLE_IOCARD; if (flags & CONF_ENABLE_IOCARD) s->socket.flags |= SS_IOCARD; + if (flags & CONF_ENABLE_ZVCARD) + s->socket.flags |= SS_ZVCARD | SS_IOCARD; if (flags & CONF_ENABLE_SPKR) { s->socket.flags |= SS_SPKR_ENA; status = CCSR_AUDIO_ENA; diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 8479b66c067..3fd5064dd43 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -261,6 +261,7 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev); #define CONF_ENABLE_ESR 0x0008 #define CONF_ENABLE_IOCARD 0x0010 /* auto-enabled if IO resources or IRQ * (CONF_ENABLE_IRQ) in use */ +#define CONF_ENABLE_ZVCARD 0x0020 /* flags used by pcmcia_loop_config() autoconfiguration */ #define CONF_AUTO_CHECK_VCC 0x0100 /* check for matching Vcc? */ -- cgit v1.2.3-70-g09d2 From 68e41c5d032668e2905404afbef75bc58be179d6 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:06:06 -0800 Subject: xhci: Avoid BUG() in interrupt context Change the BUGs in xhci_find_new_dequeue_state() to WARN_ONs, to avoid bringing down the box if one of them is hit This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 3e8211c1ce5..2a87231d588 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -474,8 +474,11 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_deq_seg = find_trb_seg(cur_td->start_seg, dev->eps[ep_index].stopped_trb, &state->new_cycle_state); - if (!state->new_deq_seg) - BUG(); + if (!state->new_deq_seg) { + WARN_ON(1); + return; + } + /* Dig out the cycle state saved by the xHC during the stop ep cmd */ xhci_dbg(xhci, "Finding endpoint context\n"); ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); @@ -486,8 +489,10 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_deq_seg = find_trb_seg(state->new_deq_seg, state->new_deq_ptr, &state->new_cycle_state); - if (!state->new_deq_seg) - BUG(); + if (!state->new_deq_seg) { + WARN_ON(1); + return; + } trb = &state->new_deq_ptr->generic; if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) && -- cgit v1.2.3-70-g09d2 From a2490187011cc2263117626615a581927d19f1d3 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:06:44 -0800 Subject: xhci: Clarify some expressions in the TRB math This makes it easier to spot some problems, which will be fixed by the next patch in the series. Also change dev_dbg to dev_err in check_trb_math(), so any math errors will be visible even when running with debug disabled. Note: This patch changes the expressions containing "((1 << TRB_MAX_BUFF_SHIFT) - 1)" to use the equivalent "(TRB_MAX_BUFF_SIZE - 1)". No change in behavior is intended for those expressions. This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 2a87231d588..1071411d6df 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2368,7 +2368,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) /* Scatter gather list entries may cross 64KB boundaries */ running_total = TRB_MAX_BUFF_SIZE - - (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); if (running_total != 0) num_trbs++; @@ -2399,11 +2399,11 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) static void check_trb_math(struct urb *urb, int num_trbs, int running_total) { if (num_trbs != 0) - dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " + dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " "TRBs, %d left\n", __func__, urb->ep->desc.bEndpointAddress, num_trbs); if (running_total != urb->transfer_buffer_length) - dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " + dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " "queued %#x (%d), asked for %#x (%d)\n", __func__, urb->ep->desc.bEndpointAddress, @@ -2538,8 +2538,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, sg = urb->sg; addr = (u64) sg_dma_address(sg); this_sg_len = sg_dma_len(sg); - trb_buff_len = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); trb_buff_len = min_t(int, trb_buff_len, this_sg_len); if (trb_buff_len > urb->transfer_buffer_length) trb_buff_len = urb->transfer_buffer_length; @@ -2577,7 +2576,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), (unsigned int) addr + trb_buff_len); if (TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) { + (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) { xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n"); xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n", (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), @@ -2621,7 +2620,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } trb_buff_len = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (addr & (TRB_MAX_BUFF_SIZE - 1)); trb_buff_len = min_t(int, trb_buff_len, this_sg_len); if (running_total + trb_buff_len > urb->transfer_buffer_length) trb_buff_len = @@ -2661,7 +2660,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs = 0; /* How much data is (potentially) left before the 64KB boundary? */ running_total = TRB_MAX_BUFF_SIZE - - (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); /* If there's some data on this 64KB chunk, or we have to send a * zero-length transfer, we need at least one TRB @@ -2705,8 +2704,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* How much data is in the first TRB? */ addr = (u64) urb->transfer_dma; trb_buff_len = TRB_MAX_BUFF_SIZE - - (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); - if (urb->transfer_buffer_length < trb_buff_len) + (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); + if (trb_buff_len > urb->transfer_buffer_length) trb_buff_len = urb->transfer_buffer_length; first_trb = true; @@ -2884,8 +2883,7 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci, addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset); td_len = urb->iso_frame_desc[i].length; - running_total = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); if (running_total != 0) num_trbs++; -- cgit v1.2.3-70-g09d2 From 5807795bd4dececdf553719cc02869e633395787 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:07:20 -0800 Subject: xhci: Fix errors in the running total calculations in the TRB math Calculations like running_total = TRB_MAX_BUFF_SIZE - (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); if (running_total != 0) num_trbs++; are incorrect, because running_total can never be zero, so the if() expression will never be true. I think the intention was that running_total be in the range of 0 to TRB_MAX_BUFF_SIZE-1, not 1 to TRB_MAX_BUFF_SIZE. So adding a running_total &= TRB_MAX_BUFF_SIZE - 1; fixes the problem. This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1071411d6df..dbbeec96ce1 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2369,6 +2369,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) /* Scatter gather list entries may cross 64KB boundaries */ running_total = TRB_MAX_BUFF_SIZE - (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; if (running_total != 0) num_trbs++; @@ -2661,6 +2662,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* How much data is (potentially) left before the 64KB boundary? */ running_total = TRB_MAX_BUFF_SIZE - (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; /* If there's some data on this 64KB chunk, or we have to send a * zero-length transfer, we need at least one TRB @@ -2884,6 +2886,7 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci, td_len = urb->iso_frame_desc[i].length; running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; if (running_total != 0) num_trbs++; -- cgit v1.2.3-70-g09d2 From bcd2fde05341cef0052e49566ec88b406a521cf3 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:07:57 -0800 Subject: xhci: Fix an error in count_sg_trbs_needed() The expression while (running_total < sg_dma_len(sg)) does not take into account that the remaining data length can be less than sg_dma_len(sg). In that case, running_total can end up being greater than the total data length, so an extra TRB is counted. Changing the expression to while (running_total < sg_dma_len(sg) && running_total < temp) fixes that. This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index dbbeec96ce1..3289bf4832c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2374,7 +2374,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) num_trbs++; /* How many more 64KB chunks to transfer, how many more TRBs? */ - while (running_total < sg_dma_len(sg)) { + while (running_total < sg_dma_len(sg) && running_total < temp) { num_trbs++; running_total += TRB_MAX_BUFF_SIZE; } -- cgit v1.2.3-70-g09d2 From 07194ab7be63a972096309ab0ea747df455c6a20 Mon Sep 17 00:00:00 2001 From: Luben Tuikov Date: Fri, 11 Feb 2011 11:33:10 -0800 Subject: USB: Reset USB 3.0 devices on (re)discovery If the device isn't reset, the XHCI HCD sends SET ADDRESS to address 0 while the device is already in Addressed state, and the request is dropped on the floor as it is addressed to the default address. This sequence of events, which this patch fixes looks like this: usb_reset_and_verify_device() hub_port_init() hub_set_address() SET_ADDRESS to 0 with 1 usb_get_device_descriptor(udev, 8) usb_get_device_descriptor(udev, 18) descriptors_changed() --> goto re_enumerate: hub_port_logical_disconnect() kick_khubd() And then: hub_events() hub_port_connect_change() usb_disconnect() usb_disable_device() new device struct sets device state to Powered choose_address() hub_port_init() <-- no reset, but SET ADDRESS to 0 with 1, timeout! The solution is to always reset the device in hub_port_init() to put it in a known state. Note from Sarah Sharp: This patch should be queued for stable trees all the way back to 2.6.34, since that was the first kernel that supported configured device reset. The code this patch touches has been there since 2.6.32, but the bug would never be hit before 2.6.34 because the xHCI driver would completely reject an attempt to reset a configured device under xHCI. Signed-off-by: Luben Tuikov Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/core/hub.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d041c6826e4..0f299b7aad6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2681,17 +2681,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - if (!udev->config && oldspeed == USB_SPEED_SUPER) { - /* Don't reset USB 3.0 devices during an initial setup */ - usb_set_device_state(udev, USB_STATE_DEFAULT); - } else { - /* Reset the device; full speed may morph to high speed */ - /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ - retval = hub_port_reset(hub, port1, udev, delay); - if (retval < 0) /* error or disconnect */ - goto fail; - /* success, speed is known */ - } + /* Reset the device; full speed may morph to high speed */ + /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ + retval = hub_port_reset(hub, port1, udev, delay); + if (retval < 0) /* error or disconnect */ + goto fail; + /* success, speed is known */ + retval = -ENODEV; if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) { -- cgit v1.2.3-70-g09d2 From 09ece30e06b19994e6f3d260e5c4be18dce22714 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 8 Feb 2011 16:29:33 -0800 Subject: USB: xhci: rework xhci_print_ir_set() to get ir set from xhci itself xhci->ir_set points to __iomem region, but xhci_print_ir_set accepts plain struct xhci_intr_reg * causing multiple sparse warning at call sites and inside the fucntion when we try to read that memory. Instead of adding __iomem qualifier to the argument let's rework the function so it itself gets needed register set from xhci and prints it. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-dbg.c | 5 +++-- drivers/usb/host/xhci-mem.c | 2 +- drivers/usb/host/xhci.c | 6 +++--- drivers/usb/host/xhci.h | 2 +- 4 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index fcbf4abbf38..582937e2132 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -169,9 +169,10 @@ static void xhci_print_ports(struct xhci_hcd *xhci) } } -void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num) +void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num) { - void *addr; + struct xhci_intr_reg __iomem *ir_set = &xhci->run_regs->ir_set[set_num]; + void __iomem *addr; u32 temp; u64 temp_64; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 1d0f45f0e7a..c10ee8b6008 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1961,7 +1961,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) /* Set the event ring dequeue address */ xhci_set_hc_event_deq(xhci); xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n"); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); /* * XXX: Might need to set the Interrupter Moderation Register to diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 34cf4e16587..9784880df58 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -473,7 +473,7 @@ int xhci_run(struct usb_hcd *hcd) xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp)); xhci_writel(xhci, ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); if (NUM_TEST_NOOPS > 0) doorbell = xhci_setup_one_noop(xhci); @@ -528,7 +528,7 @@ void xhci_stop(struct usb_hcd *hcd) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_writel(xhci, ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); @@ -755,7 +755,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_writel(xhci, ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7f236fd2201..7f127df6dd5 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1348,7 +1348,7 @@ static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci) } /* xHCI debugging */ -void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num); +void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num); void xhci_print_registers(struct xhci_hcd *xhci); void xhci_dbg_regs(struct xhci_hcd *xhci); void xhci_print_run_regs(struct xhci_hcd *xhci); -- cgit v1.2.3-70-g09d2 From c50a00f8feba42c5bccff47e052e4cb0c95dcd2b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 8 Feb 2011 16:29:34 -0800 Subject: USB: xhci: fix couple sparse annotations There is no point in casting to (void *) when setting up xhci->ir_set as it only makes us lose __iomem annotation and makes sparse unhappy. OTOH we do need to cast to (void *) when calculating xhci->dba from offset, but since it is IO memory we need to annotate it as such. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-mem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index c10ee8b6008..dbb8bcd3919 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1900,11 +1900,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) val &= DBOFF_MASK; xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x" " from cap regs base addr\n", val); - xhci->dba = (void *) xhci->cap_regs + val; + xhci->dba = (void __iomem *) xhci->cap_regs + val; xhci_dbg_regs(xhci); xhci_print_run_regs(xhci); /* Set ir_set to interrupt register set 0 */ - xhci->ir_set = (void *) xhci->run_regs->ir_set; + xhci->ir_set = &xhci->run_regs->ir_set[0]; /* * Event ring setup: Allocate a normal ring, but also setup -- cgit v1.2.3-70-g09d2 From 5f04d5068a90602b93a7953e9a47c496705c6976 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sun, 20 Feb 2011 11:49:45 -0800 Subject: net: Fix more stale on-stack list_head objects. From: Eric W. Biederman In the beginning with batching unreg_list was a list that was used only once in the lifetime of a network device (I think). Now we have calls using the unreg_list that can happen multiple times in the life of a network device like dev_deactivate and dev_close that are also using the unreg_list. In addition in unregister_netdevice_queue we also do a list_move because for devices like veth pairs it is possible that unregister_netdevice_queue will be called multiple times. So I think the change below to fix dev_deactivate which Eric D. missed will fix this problem. Now to go test that. Signed-off-by: David S. Miller --- net/mac80211/iface.c | 1 + net/sched/sch_generic.c | 1 + 2 files changed, 2 insertions(+) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 8acba456744..7a10a8d1b2d 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1229,6 +1229,7 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local) } mutex_unlock(&local->iflist_mtx); unregister_netdevice_many(&unreg_list); + list_del(&unreg_list); } static u32 ieee80211_idle_off(struct ieee80211_local *local, diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 34dc598440a..1bc698039ae 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -839,6 +839,7 @@ void dev_deactivate(struct net_device *dev) list_add(&dev->unreg_list, &single); dev_deactivate_many(&single); + list_del(&single); } static void dev_init_scheduler_queue(struct net_device *dev, -- cgit v1.2.3-70-g09d2 From da9cf5050a2e3dbc3cf26a8d908482eb4485ed49 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 21 Feb 2011 18:25:57 +1100 Subject: md: avoid spinlock problem in blk_throtl_exit blk_throtl_exit assumes that ->queue_lock still exists, so make sure that it does. To do this, we stop redirecting ->queue_lock to conf->device_lock and leave it pointing where it is initialised - __queue_lock. As the blk_plug functions check the ->queue_lock is held, we now take that spin_lock explicitly around the plug functions. We don't need the locking, just the warning removal. This is needed for any kernel with the blk_throtl code, which is which is 2.6.37 and later. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/linear.c | 1 - drivers/md/multipath.c | 1 - drivers/md/raid0.c | 1 - drivers/md/raid1.c | 6 ++++-- drivers/md/raid10.c | 7 ++++--- drivers/md/raid5.c | 1 - 6 files changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 8a2f767f26d..0ed7f6bc2a7 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -216,7 +216,6 @@ static int linear_run (mddev_t *mddev) if (md_check_no_bitmap(mddev)) return -EINVAL; - mddev->queue->queue_lock = &mddev->queue->__queue_lock; conf = linear_conf(mddev, mddev->raid_disks); if (!conf) diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 6d7ddf32ef2..3a62d440e27 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -435,7 +435,6 @@ static int multipath_run (mddev_t *mddev) * bookkeeping area. [whatever we allocate in multipath_run(), * should be freed in multipath_stop()] */ - mddev->queue->queue_lock = &mddev->queue->__queue_lock; conf = kzalloc(sizeof(multipath_conf_t), GFP_KERNEL); mddev->private = conf; diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 75671dfee55..c0ac457f121 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -361,7 +361,6 @@ static int raid0_run(mddev_t *mddev) if (md_check_no_bitmap(mddev)) return -EINVAL; blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors); - mddev->queue->queue_lock = &mddev->queue->__queue_lock; /* if private is not null, we are here after takeover */ if (mddev->private == NULL) { diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a23ffa397ba..06cd712807d 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -593,7 +593,10 @@ static int flush_pending_writes(conf_t *conf) if (conf->pending_bio_list.head) { struct bio *bio; bio = bio_list_get(&conf->pending_bio_list); + /* Only take the spinlock to quiet a warning */ + spin_lock(conf->mddev->queue->queue_lock); blk_remove_plug(conf->mddev->queue); + spin_unlock(conf->mddev->queue->queue_lock); spin_unlock_irq(&conf->device_lock); /* flush any pending bitmap writes to * disk before proceeding w/ I/O */ @@ -959,7 +962,7 @@ static int make_request(mddev_t *mddev, struct bio * bio) atomic_inc(&r1_bio->remaining); spin_lock_irqsave(&conf->device_lock, flags); bio_list_add(&conf->pending_bio_list, mbio); - blk_plug_device(mddev->queue); + blk_plug_device_unlocked(mddev->queue); spin_unlock_irqrestore(&conf->device_lock, flags); } r1_bio_write_done(r1_bio, bio->bi_vcnt, behind_pages, behind_pages != NULL); @@ -2021,7 +2024,6 @@ static int run(mddev_t *mddev) if (IS_ERR(conf)) return PTR_ERR(conf); - mddev->queue->queue_lock = &conf->device_lock; list_for_each_entry(rdev, &mddev->disks, same_set) { disk_stack_limits(mddev->gendisk, rdev->bdev, rdev->data_offset << 9); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 3b607b28741..747d061d8e0 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -662,7 +662,10 @@ static int flush_pending_writes(conf_t *conf) if (conf->pending_bio_list.head) { struct bio *bio; bio = bio_list_get(&conf->pending_bio_list); + /* Spinlock only taken to quiet a warning */ + spin_lock(conf->mddev->queue->queue_lock); blk_remove_plug(conf->mddev->queue); + spin_unlock(conf->mddev->queue->queue_lock); spin_unlock_irq(&conf->device_lock); /* flush any pending bitmap writes to disk * before proceeding w/ I/O */ @@ -971,7 +974,7 @@ static int make_request(mddev_t *mddev, struct bio * bio) atomic_inc(&r10_bio->remaining); spin_lock_irqsave(&conf->device_lock, flags); bio_list_add(&conf->pending_bio_list, mbio); - blk_plug_device(mddev->queue); + blk_plug_device_unlocked(mddev->queue); spin_unlock_irqrestore(&conf->device_lock, flags); } @@ -2304,8 +2307,6 @@ static int run(mddev_t *mddev) if (!conf) goto out; - mddev->queue->queue_lock = &conf->device_lock; - mddev->thread = conf->thread; conf->thread = NULL; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 70281282419..78536fdbd87 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5204,7 +5204,6 @@ static int run(mddev_t *mddev) mddev->queue->backing_dev_info.congested_data = mddev; mddev->queue->backing_dev_info.congested_fn = raid5_congested; - mddev->queue->queue_lock = &conf->device_lock; mddev->queue->unplug_fn = raid5_unplug_queue; chunk_size = mddev->chunk_sectors << 9; -- cgit v1.2.3-70-g09d2 From e19e074b1525d11a66c8e3386fec7db248ad3005 Mon Sep 17 00:00:00 2001 From: Kushal Koolwal Date: Sat, 19 Feb 2011 13:56:03 -0800 Subject: x86: Fix reboot problem on VersaLogic Menlow boards VersaLogic Menlow based boards hang on reboot unless reboot=bios is used. Add quirk to reboot through the BIOS. Tested on at least four boards. Signed-off-by: Kushal Koolwal LKML-Reference: <1298152563-21594-1-git-send-email-kushalkoolwal@gmail.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index fc7aae1e2bc..715037caeb4 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -285,6 +285,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "P4S800"), }, }, + { /* Handle problems with rebooting on VersaLogic Menlow boards */ + .callback = set_bios_reboot, + .ident = "VersaLogic Menlow based board", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "VersaLogic Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"), + }, + }, { } }; -- cgit v1.2.3-70-g09d2 From eeda276bef36026fce3029e6423e1a09a50c359e Mon Sep 17 00:00:00 2001 From: Lu Guanqun Date: Mon, 21 Feb 2011 13:45:04 +0800 Subject: ALSA: fix one memory leak in sound jack Signed-off-by: Lu Guanqun Reviewed-by: Wu Fengguang Signed-off-by: Takashi Iwai --- sound/core/jack.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/core/jack.c b/sound/core/jack.c index 4902ae56873..53b53e97c89 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -141,6 +141,7 @@ int snd_jack_new(struct snd_card *card, const char *id, int type, fail_input: input_free_device(jack->input_dev); + kfree(jack->id); kfree(jack); return err; } -- cgit v1.2.3-70-g09d2 From c24f691b56107feeba076616982093ee2d3c8fb5 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Mon, 7 Feb 2011 12:57:04 +0000 Subject: tcp: undo_retrans counter fixes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a bug that undo_retrans is incorrectly decremented when undo_marker is not set or undo_retrans is already 0. This happens when sender receives more DSACK ACKs than packets retransmitted during the current undo phase. This may also happen when sender receives DSACK after the undo operation is completed or cancelled. Fix another bug that undo_retrans is incorrectly incremented when sender retransmits an skb and tcp_skb_pcount(skb) > 1 (TSO). This case is rare but not impossible. Signed-off-by: Yuchung Cheng Acked-by: Ilpo Järvinen Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 5 +++-- net/ipv4/tcp_output.c | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index eb7f82ebf4a..65f6c040624 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1222,7 +1222,7 @@ static int tcp_check_dsack(struct sock *sk, struct sk_buff *ack_skb, } /* D-SACK for already forgotten data... Do dumb counting. */ - if (dup_sack && + if (dup_sack && tp->undo_marker && tp->undo_retrans && !after(end_seq_0, prior_snd_una) && after(end_seq_0, tp->undo_marker)) tp->undo_retrans--; @@ -1299,7 +1299,8 @@ static u8 tcp_sacktag_one(struct sk_buff *skb, struct sock *sk, /* Account D-SACK for retransmitted packet. */ if (dup_sack && (sacked & TCPCB_RETRANS)) { - if (after(TCP_SKB_CB(skb)->end_seq, tp->undo_marker)) + if (tp->undo_marker && tp->undo_retrans && + after(TCP_SKB_CB(skb)->end_seq, tp->undo_marker)) tp->undo_retrans--; if (sacked & TCPCB_SACKED_ACKED) state->reord = min(fack_count, state->reord); diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 406f320336e..dfa5beb0c1c 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2162,7 +2162,7 @@ int tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb) if (!tp->retrans_stamp) tp->retrans_stamp = TCP_SKB_CB(skb)->when; - tp->undo_retrans++; + tp->undo_retrans += tcp_skb_pcount(skb); /* snd_nxt is stored to detect loss of retransmitted segment, * see tcp_input.c tcp_sacktag_write_queue(). -- cgit v1.2.3-70-g09d2 From 573cfde7aaeaadb0fd356ff2a14bdf9238967661 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Fri, 4 Feb 2011 01:41:02 +0200 Subject: ath5k: Fix fast channel switching Fast channel change fixes: a) Always set OFDM timings b) Don't re-activate PHY c) Enable only NF calibration, not AGC https://bugzilla.kernel.org/show_bug.cgi?id=27382 Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/phy.c | 142 +++++++++++++++++++++-------------- 1 file changed, 87 insertions(+), 55 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index c44111fc98b..62ce2f4e860 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -282,6 +282,34 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah) return 0; } +/* + * Wait for synth to settle + */ +static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* + * On 5211+ read activation -> rx delay + * and use it (100ns steps). + */ + if (ah->ah_version != AR5K_AR5210) { + u32 delay; + delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + delay = (channel->hw_value & CHANNEL_CCK) ? + ((delay << 2) / 22) : (delay / 10); + if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) + delay = delay << 1; + if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) + delay = delay << 2; + /* XXX: /2 on turbo ? Let's be safe + * for now */ + udelay(100 + delay); + } else { + mdelay(1); + } +} + /**********************\ * RF Gain optimization * @@ -3238,6 +3266,13 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, /* Failed */ if (i >= 100) return -EIO; + + /* Set channel and wait for synth */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + ath5k_hw_wait_for_synth(ah, channel); } /* @@ -3252,13 +3287,53 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (ret) return ret; + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value & CHANNEL_OFDM) { + + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + + /* Spur info is available only from EEPROM versions + * greater than 5.3, but the EEPROM routines will use + * static values for older versions */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424) + ath5k_hw_set_spur_mitigation_filter(ah, + channel); + } + + /* If we used fast channel switching + * we are done, release RF bus and + * fire up NF calibration. + * + * Note: Only NF calibration due to + * channel change, not AGC calibration + * since AGC is still running ! + */ + if (fast) { + /* + * Release RF Bus grant + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, + AR5K_PHY_RFBUS_REQ_REQUEST); + + /* + * Start NF calibration + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF); + + return ret; + } + /* * For 5210 we do all initialization using * initvals, so we don't have to modify * any settings (5210 also only supports * a/aturbo modes) */ - if ((ah->ah_version != AR5K_AR5210) && !fast) { + if (ah->ah_version != AR5K_AR5210) { /* * Write initial RF gain settings @@ -3277,22 +3352,6 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (ret) return ret; - /* Write OFDM timings on 5212*/ - if (ah->ah_version == AR5K_AR5212 && - channel->hw_value & CHANNEL_OFDM) { - - ret = ath5k_hw_write_ofdm_timings(ah, channel); - if (ret) - return ret; - - /* Spur info is available only from EEPROM versions - * greater than 5.3, but the EEPROM routines will use - * static values for older versions */ - if (ah->ah_mac_srev >= AR5K_SREV_AR5424) - ath5k_hw_set_spur_mitigation_filter(ah, - channel); - } - /*Enable/disable 802.11b mode on 5111 (enable 2111 frequency converter + CCK)*/ if (ah->ah_radio == AR5K_RF5111) { @@ -3323,47 +3382,20 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, */ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + ath5k_hw_wait_for_synth(ah, channel); + /* - * On 5211+ read activation -> rx delay - * and use it. + * Perform ADC test to see if baseband is ready + * Set tx hold and check adc test register */ - if (ah->ah_version != AR5K_AR5210) { - u32 delay; - delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & - AR5K_PHY_RX_DELAY_M; - delay = (channel->hw_value & CHANNEL_CCK) ? - ((delay << 2) / 22) : (delay / 10); - if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) - delay = delay << 1; - if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) - delay = delay << 2; - /* XXX: /2 on turbo ? Let's be safe - * for now */ - udelay(100 + delay); - } else { - mdelay(1); - } - - if (fast) - /* - * Release RF Bus grant - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, - AR5K_PHY_RFBUS_REQ_REQUEST); - else { - /* - * Perform ADC test to see if baseband is ready - * Set tx hold and check adc test register - */ - phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); - ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); - for (i = 0; i <= 20; i++) { - if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) - break; - udelay(200); - } - ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); + phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); } + ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); /* * Start automatic gain control calibration -- cgit v1.2.3-70-g09d2 From a866a2cc1c558089dd4c627eeb300142b1354474 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sun, 30 Jan 2011 13:22:41 +0100 Subject: rt2x00: Fix WPA TKIP Michael MIC failures. As reported and found by Johannes Stezenbach: rt2800{pci,usb} do not report the Michael MIC in RXed frames, but do check the Michael MIC in hardware. Therefore we have to report to mac80211 that the received frame does not include the Michael MIC. https://bugzilla.kernel.org/show_bug.cgi?id=16608 Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800pci.c | 6 ++++++ drivers/net/wireless/rt2x00/rt2800usb.c | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 7951cdaa9c0..3b3f1e45ab3 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -652,6 +652,12 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; + /* + * The hardware has already checked the Michael Mic and has + * stripped it from the frame. Signal this to mac80211. + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) rxdesc->flags |= RX_FLAG_DECRYPTED; else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index b97a4a54ff4..197a36c05fd 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -486,6 +486,12 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; + /* + * The hardware has already checked the Michael Mic and has + * stripped it from the frame. Signal this to mac80211. + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) rxdesc->flags |= RX_FLAG_DECRYPTED; else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) -- cgit v1.2.3-70-g09d2 From 4f919a3bc54da01db829c520ce4b1fabfde1c3f7 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Tue, 22 Feb 2011 00:11:06 +0800 Subject: fix cfg80211_wext_siwfreq lock ordering... I previously managed to reproduce a hang while scanning wireless channels (reproducible with airodump-ng hopping channels); subsequent lockdep instrumentation revealed a lock ordering issue. Without knowing the design intent, it looks like the locks should be taken in reverse order; please comment. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.38-rc5-341cd #4 ------------------------------------------------------- airodump-ng/15445 is trying to acquire lock: (&rdev->devlist_mtx){+.+.+.}, at: [] cfg80211_wext_siwfreq+0xc6/0x100 but task is already holding lock: (&wdev->mtx){+.+.+.}, at: [] cfg80211_wext_siwfreq+0xbc/0x100 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&wdev->mtx){+.+.+.}: [] lock_acquire+0xc6/0x280 [] mutex_lock_nested+0x6e/0x4b0 [] cfg80211_netdev_notifier_call+0x430/0x5f0 [] notifier_call_chain+0x8b/0x100 [] raw_notifier_call_chain+0x11/0x20 [] call_netdevice_notifiers+0x32/0x60 [] __dev_notify_flags+0x34/0x80 [] dev_change_flags+0x40/0x70 [] do_setlink+0x1fc/0x8d0 [] rtnl_setlink+0xf2/0x140 [] rtnetlink_rcv_msg+0x163/0x270 [] netlink_rcv_skb+0xa1/0xd0 [] rtnetlink_rcv+0x20/0x30 [] netlink_unicast+0x2ba/0x300 [] netlink_sendmsg+0x267/0x3e0 [] sock_sendmsg+0xe4/0x110 [] sys_sendmsg+0x253/0x3b0 [] system_call_fastpath+0x16/0x1b -> #0 (&rdev->devlist_mtx){+.+.+.}: [] __lock_acquire+0x1622/0x1d10 [] lock_acquire+0xc6/0x280 [] mutex_lock_nested+0x6e/0x4b0 [] cfg80211_wext_siwfreq+0xc6/0x100 [] ioctl_standard_call+0x5d/0xd0 [] T.808+0x163/0x170 [] wext_handle_ioctl+0x3a/0x90 [] dev_ioctl+0x6f2/0x830 [] sock_ioctl+0xfd/0x290 [] do_vfs_ioctl+0x9d/0x590 [] sys_ioctl+0x4a/0x80 [] system_call_fastpath+0x16/0x1b other info that might help us debug this: 2 locks held by airodump-ng/15445: #0: (rtnl_mutex){+.+.+.}, at: [] rtnl_lock+0x12/0x20 #1: (&wdev->mtx){+.+.+.}, at: [] cfg80211_wext_siwfreq+0xbc/0x100 stack backtrace: Pid: 15445, comm: airodump-ng Not tainted 2.6.38-rc5-341cd #4 Call Trace: [] ? print_circular_bug+0xfa/0x100 [] ? __lock_acquire+0x1622/0x1d10 [] ? trace_hardirqs_off_caller+0x29/0xc0 [] ? lock_acquire+0xc6/0x280 [] ? cfg80211_wext_siwfreq+0xc6/0x100 [] ? mark_held_locks+0x67/0x90 [] ? mutex_lock_nested+0x6e/0x4b0 [] ? cfg80211_wext_siwfreq+0xc6/0x100 [] ? mark_held_locks+0x67/0x90 [] ? cfg80211_wext_siwfreq+0xc6/0x100 [] ? cfg80211_wext_siwfreq+0xc6/0x100 [] ? ioctl_standard_call+0x5d/0xd0 [] ? __dev_get_by_name+0x9b/0xc0 [] ? ioctl_standard_call+0x0/0xd0 [] ? T.808+0x163/0x170 [] ? might_fault+0x72/0xd0 [] ? wext_handle_ioctl+0x3a/0x90 [] ? might_fault+0xbb/0xd0 [] ? dev_ioctl+0x6f2/0x830 [] ? put_lock_stats+0xe/0x40 [] ? lock_release_holdtime+0xac/0x150 [] ? sock_ioctl+0xfd/0x290 [] ? do_vfs_ioctl+0x9d/0x590 [] ? fget_light+0x1df/0x3c0 [] ? sys_ioctl+0x4a/0x80 [] ? system_call_fastpath+0x16/0x1b Signed-off-by: Daniel J Blueman Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/wext-compat.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index 3e5dbd4e4cd..d112f038edf 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -802,11 +802,11 @@ int cfg80211_wext_siwfreq(struct net_device *dev, return freq; if (freq == 0) return -EINVAL; - wdev_lock(wdev); mutex_lock(&rdev->devlist_mtx); + wdev_lock(wdev); err = cfg80211_set_freq(rdev, wdev, freq, NL80211_CHAN_NO_HT); - mutex_unlock(&rdev->devlist_mtx); wdev_unlock(wdev); + mutex_unlock(&rdev->devlist_mtx); return err; default: return -EOPNOTSUPP; -- cgit v1.2.3-70-g09d2 From 0bf719dfdecc5552155cbec78e49fa06e531e35c Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 11 Feb 2011 01:48:42 +0100 Subject: p54pci: update receive dma buffers before and after processing Documentation/DMA-API-HOWTO.txt states: "DMA transfers need to be synced properly in order for the cpu and device to see the most uptodate and correct copy of the DMA buffer." Cc: Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54pci.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 1eacba4daa5..0494d7b102d 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -199,6 +199,7 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index, while (i != idx) { u16 len; struct sk_buff *skb; + dma_addr_t dma_addr; desc = &ring[i]; len = le16_to_cpu(desc->len); skb = rx_buf[i]; @@ -216,17 +217,20 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index, len = priv->common.rx_mtu; } + dma_addr = le32_to_cpu(desc->host_addr); + pci_dma_sync_single_for_cpu(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); skb_put(skb, len); if (p54_rx(dev, skb)) { - pci_unmap_single(priv->pdev, - le32_to_cpu(desc->host_addr), - priv->common.rx_mtu + 32, - PCI_DMA_FROMDEVICE); + pci_unmap_single(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); rx_buf[i] = NULL; - desc->host_addr = 0; + desc->host_addr = cpu_to_le32(0); } else { skb_trim(skb, 0); + pci_dma_sync_single_for_device(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); desc->len = cpu_to_le16(priv->common.rx_mtu + 32); } -- cgit v1.2.3-70-g09d2 From 306496761745942d8167e9193a738b559a7fb0b3 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 21 Feb 2011 10:23:18 +0100 Subject: ALSA: HDA: Fix mic initialization in VIA auto parser This typo caused some microphone inputs not to be correctly initialized on VIA codecs. Reported-By: Mark Goldstein Cc: stable@kernel.org Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_via.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index a76c3260d94..63b0054200a 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -567,7 +567,7 @@ static void via_auto_init_analog_input(struct hda_codec *codec) hda_nid_t nid = cfg->inputs[i].pin; if (spec->smart51_enabled && is_smart51_pins(spec, nid)) ctl = PIN_OUT; - else if (i == AUTO_PIN_MIC) + else if (cfg->inputs[i].type == AUTO_PIN_MIC) ctl = PIN_VREF50; else ctl = PIN_IN; -- cgit v1.2.3-70-g09d2 From 2c46d2aec054e61a33feac8c3992218eabdcc22a Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 9 Feb 2011 18:29:39 +0100 Subject: KVM: SVM: Advance instruction pointer in dr_intercept In the dr_intercept function a new cpu-feature called decode-assists is implemented and used when available. This code-path does not advance the guest-rip causing the guest to dead-loop over mov-dr instructions. This is fixed by this patch. Signed-off-by: Joerg Roedel Signed-off-by: Avi Kivity --- arch/x86/kvm/svm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 54ce246a383..63fec1531e8 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -2777,6 +2777,8 @@ static int dr_interception(struct vcpu_svm *svm) kvm_register_write(&svm->vcpu, reg, val); } + skip_emulated_instruction(&svm->vcpu); + return 1; } -- cgit v1.2.3-70-g09d2 From 86b27d8050b6b2aec31063fa9f40b16fb347afb3 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 11 Feb 2011 20:47:45 +0000 Subject: drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch If the gpu is hung, then whatever was inside the render cache is lost and there is little point waiting for it. Or complaining if we see an EIO or EAGAIN instead. So, if the GPU is indeed in its death throes when we need to rewrite the registers for a new framebuffer, just ignore the error and proceed with the update. Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3b006536b3d..dcb821737f3 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1630,19 +1630,19 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; wait_event(dev_priv->pending_flip_queue, + atomic_read(&dev_priv->mm.wedged) || atomic_read(&obj->pending_flip) == 0); /* Big Hammer, we also need to ensure that any pending * MI_WAIT_FOR_EVENT inside a user batch buffer on the * current scanout is retired before unpinning the old * framebuffer. + * + * This should only fail upon a hung GPU, in which case we + * can safely continue. */ ret = i915_gem_object_flush_gpu(obj, false); - if (ret) { - i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj); - mutex_unlock(&dev->struct_mutex); - return ret; - } + (void) ret; } ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y, -- cgit v1.2.3-70-g09d2 From a36dbec57e9a665d69cd2e1a673153ddb2d62785 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 11 Feb 2011 14:44:51 -0800 Subject: drm/i915: don't enable FDI & transcoder interrupts after all We can enable some safely, but FDI and transcoder interrupts can occur and block other interrupts from being detected (like port hotplug events). So keep them disabled by default (they can be re-enabled for debugging display bringup, but should generally be off). Signed-off-by: Jesse Barnes Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_irq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 97f946dcc1a..8a9e08bf1cf 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -316,6 +316,8 @@ static void i915_hotplug_work_func(struct work_struct *work) struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; + DRM_DEBUG_KMS("running encoder hotplug functions\n"); + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) if (encoder->hot_plug) encoder->hot_plug(encoder); @@ -1649,9 +1651,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev) } else { hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; - hotplug_mask |= SDE_AUX_MASK | SDE_FDI_MASK | SDE_TRANS_MASK; - I915_WRITE(FDI_RXA_IMR, 0); - I915_WRITE(FDI_RXB_IMR, 0); + hotplug_mask |= SDE_AUX_MASK; } dev_priv->pch_irq_mask = ~hotplug_mask; -- cgit v1.2.3-70-g09d2 From bdb8b975fc66e081c3f39be6267701f8226d11aa Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 22 Dec 2010 11:37:09 +0000 Subject: agp/intel: Experiment with a 855GM GWB bit Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27187 Tested-by: Thorsten Vollmer (DFI-ACP G5M150-N w/852GME) Tested-by: Moritz Brunner <2points@gmx.org> (Asus M2400N/i855GM) Tested-by: Indan Zupancic (Thinkpad X40/855GM rev 02) Tested-by: Eric Anholt (865G) Signed-off-by: Chris Wilson --- drivers/char/agp/intel-agp.h | 1 + drivers/char/agp/intel-gtt.c | 56 +++++++++++++++++--------------------------- 2 files changed, 22 insertions(+), 35 deletions(-) diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index c195bfeade1..5feebe2800e 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -130,6 +130,7 @@ #define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4) #define I915_IFPADDR 0x60 +#define I830_HIC 0x70 /* Intel 965G registers */ #define I965_MSAC 0x62 diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index fab3d3265ad..0d09b537bb9 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include "agp.h" #include "intel-agp.h" @@ -70,12 +71,8 @@ static struct _intel_private { u32 __iomem *gtt; /* I915G */ bool clear_fake_agp; /* on first access via agp, fill with scratch */ int num_dcache_entries; - union { - void __iomem *i9xx_flush_page; - void *i8xx_flush_page; - }; + void __iomem *i9xx_flush_page; char *i81x_gtt_table; - struct page *i8xx_page; struct resource ifp_resource; int resource_valid; struct page *scratch_page; @@ -722,28 +719,6 @@ static int intel_fake_agp_fetch_size(void) static void i830_cleanup(void) { - if (intel_private.i8xx_flush_page) { - kunmap(intel_private.i8xx_flush_page); - intel_private.i8xx_flush_page = NULL; - } - - __free_page(intel_private.i8xx_page); - intel_private.i8xx_page = NULL; -} - -static void intel_i830_setup_flush(void) -{ - /* return if we've already set the flush mechanism up */ - if (intel_private.i8xx_page) - return; - - intel_private.i8xx_page = alloc_page(GFP_KERNEL); - if (!intel_private.i8xx_page) - return; - - intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page); - if (!intel_private.i8xx_flush_page) - i830_cleanup(); } /* The chipset_flush interface needs to get data that has already been @@ -758,14 +733,27 @@ static void intel_i830_setup_flush(void) */ static void i830_chipset_flush(void) { - unsigned int *pg = intel_private.i8xx_flush_page; + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + /* Forcibly evict everything from the CPU write buffers. + * clflush appears to be insufficient. + */ + wbinvd_on_all_cpus(); + + /* Now we've only seen documents for this magic bit on 855GM, + * we hope it exists for the other gen2 chipsets... + * + * Also works as advertised on my 845G. + */ + writel(readl(intel_private.registers+I830_HIC) | (1<<31), + intel_private.registers+I830_HIC); - memset(pg, 0, 1024); + while (readl(intel_private.registers+I830_HIC) & (1<<31)) { + if (time_after(jiffies, timeout)) + break; - if (cpu_has_clflush) - clflush_cache_range(pg, 1024); - else if (wbinvd_on_all_cpus() != 0) - printk(KERN_ERR "Timed out waiting for cache flush.\n"); + udelay(50); + } } static void i830_write_entry(dma_addr_t addr, unsigned int entry, @@ -849,8 +837,6 @@ static int i830_setup(void) intel_private.gtt_bus_addr = reg_addr + I810_PTE_BASE; - intel_i830_setup_flush(); - return 0; } -- cgit v1.2.3-70-g09d2 From 011b9910bdaf2e52c48c012490ab444fceea1959 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 15 Feb 2011 15:08:02 -0800 Subject: drm/i915: skip FDI & PCH enabling for DP_A eDP on the CPU doesn't need the PCH set up at all, it can in fact cause problems. So avoid FDI training and PCH PLL enabling in that case. Signed-off-by: Jesse Barnes Tested-by: Andy Whitcroft Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 83 +++++++++++++++++++++++++++++++++++- 1 file changed, 81 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index dcb821737f3..9ca1bb2554f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2045,6 +2045,31 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) atomic_read(&obj->pending_flip) == 0); } +static bool intel_crtc_driving_pch(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct intel_encoder *encoder; + + /* + * If there's a non-PCH eDP on this crtc, it must be DP_A, and that + * must be driven by its own crtc; no sharing is possible. + */ + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { + if (encoder->base.crtc != crtc) + continue; + + switch (encoder->type) { + case INTEL_OUTPUT_EDP: + if (!intel_encoder_is_pch_edp(&encoder->base)) + return false; + continue; + } + } + + return true; +} + static void ironlake_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -2053,6 +2078,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 reg, temp; + bool is_pch_port = false; if (intel_crtc->active) return; @@ -2066,7 +2092,56 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); } - ironlake_fdi_enable(crtc); + is_pch_port = intel_crtc_driving_pch(crtc); + + if (is_pch_port) + ironlake_fdi_enable(crtc); + else { + /* disable CPU FDI tx and PCH FDI rx */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_TX_ENABLE); + POSTING_READ(reg); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(0x7 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp & ~FDI_RX_ENABLE); + + POSTING_READ(reg); + udelay(100); + + /* Ironlake workaround, disable clock pointer after downing FDI */ + if (HAS_PCH_IBX(dev)) + I915_WRITE(FDI_RX_CHICKEN(pipe), + I915_READ(FDI_RX_CHICKEN(pipe) & + ~FDI_RX_PHASE_SYNC_POINTER_ENABLE)); + + /* still set train pattern 1 */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + I915_WRITE(reg, temp); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + if (HAS_PCH_CPT(dev)) { + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; + } else { + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + } + /* BPC in FDI rx is consistent with that in PIPECONF */ + temp &= ~(0x07 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp); + + POSTING_READ(reg); + udelay(100); + } /* Enable panel fitting for LVDS */ if (dev_priv->pch_pf_size && @@ -2100,6 +2175,10 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) intel_flush_display_plane(dev, plane); } + /* Skip the PCH stuff if possible */ + if (!is_pch_port) + goto done; + /* For PCH output, training FDI link */ if (IS_GEN6(dev)) gen6_fdi_link_train(crtc); @@ -2184,7 +2263,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(reg, temp | TRANS_ENABLE); if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) DRM_ERROR("failed to enable transcoder %d\n", pipe); - +done: intel_crtc_load_lut(crtc); intel_update_fbc(dev); intel_crtc_update_cursor(crtc, true); -- cgit v1.2.3-70-g09d2 From 790e10ba6c93c123665a3cfa53d6dcf73923e458 Mon Sep 17 00:00:00 2001 From: Romain Francoise Date: Tue, 22 Feb 2011 10:48:06 +0100 Subject: .gitignore: ignore *.xz files Building with CONFIG_KERNEL_XZ results in the following: # Untracked files: # (use "git add ..." to include in what will be committed) # # arch/x86/boot/compressed/vmlinux.bin.xz So ignore xz-compressed files at the top level like we already do for other compression types. Signed-off-by: Romain Francoise Signed-off-by: Linus Torvalds --- .gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/.gitignore b/.gitignore index 8faa6c02b39..5d56a3fd0de 100644 --- a/.gitignore +++ b/.gitignore @@ -28,6 +28,7 @@ modules.builtin *.gz *.bz2 *.lzma +*.xz *.lzo *.patch *.gcno -- cgit v1.2.3-70-g09d2 From 9cc6e0c4c457f84bedcfb04e7dd58a36909c4ef7 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Tue, 15 Feb 2011 13:19:17 +0000 Subject: bridge: Fix IPv6 multicast snooping by storing correct protocol type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The protocol type for IPv6 entries in the hash table for multicast bridge snooping is falsely set to ETH_P_IP, marking it as an IPv4 address, instead of setting it to ETH_P_IPV6, which results in negative look-ups in the hash table later. Signed-off-by: Linus Lüssing Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 09d5c098792..17708fccf1e 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -784,7 +784,7 @@ static int br_ip6_multicast_add_group(struct net_bridge *br, return 0; ipv6_addr_copy(&br_group.u.ip6, group); - br_group.proto = htons(ETH_P_IP); + br_group.proto = htons(ETH_P_IPV6); return br_multicast_add_group(br, port, &br_group); } -- cgit v1.2.3-70-g09d2 From 649e984d00416cb1a254fdbebd6d3f9fa01c32fa Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Tue, 15 Feb 2011 13:19:18 +0000 Subject: bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 report MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We actually want a pointer to the grec_nsrcr and not the following field. Otherwise we can get very high values for *nsrcs as the first two bytes of the IPv6 multicast address are being used instead, leading to a failing pskb_may_pull() which results in MLDv2 reports not being parsed. Signed-off-by: Linus Lüssing Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 17708fccf1e..d69beaf8362 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1013,7 +1013,7 @@ static int br_ip6_multicast_mld2_report(struct net_bridge *br, nsrcs = skb_header_pointer(skb, len + offsetof(struct mld2_grec, - grec_mca), + grec_nsrcs), sizeof(_nsrcs), &_nsrcs); if (!nsrcs) return -EINVAL; -- cgit v1.2.3-70-g09d2 From d41db9f3f71548f07b8b6d81a88220d0035b04f6 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Tue, 15 Feb 2011 13:19:19 +0000 Subject: bridge: Add missing ntohs()s for MLDv2 report parsing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The nsrcs number is 2 Byte wide, therefore we need to call ntohs() before using it. Signed-off-by: Linus Lüssing Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index d69beaf8362..9ce2af18770 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1020,11 +1020,12 @@ static int br_ip6_multicast_mld2_report(struct net_bridge *br, if (!pskb_may_pull(skb, len + sizeof(*grec) + - sizeof(struct in6_addr) * (*nsrcs))) + sizeof(struct in6_addr) * ntohs(*nsrcs))) return -EINVAL; grec = (struct mld2_grec *)(skb->data + len); - len += sizeof(*grec) + sizeof(struct in6_addr) * (*nsrcs); + len += sizeof(*grec) + + sizeof(struct in6_addr) * ntohs(*nsrcs); /* We treat these as MLDv1 reports for now. */ switch (grec->grec_type) { -- cgit v1.2.3-70-g09d2 From 5ced1339612d1fa095459bd481f1d1f64f76f859 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Tue, 15 Feb 2011 13:19:20 +0000 Subject: ipv6: Add IPv6 multicast address flag defines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit adds the missing IPv6 multicast address flag defines to complement the already existing multicast address scope defines and to be able to check these flags nicely in the future. Signed-off-by: Linus Lüssing Signed-off-by: David S. Miller --- include/net/ipv6.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 4a3cd2cd2f5..96e50e0ce3c 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -88,6 +88,18 @@ #define IPV6_ADDR_SCOPE_ORGLOCAL 0x08 #define IPV6_ADDR_SCOPE_GLOBAL 0x0e +/* + * Addr flags + */ +#ifdef __KERNEL__ +#define IPV6_ADDR_MC_FLAG_TRANSIENT(a) \ + ((a)->s6_addr[1] & 0x10) +#define IPV6_ADDR_MC_FLAG_PREFIX(a) \ + ((a)->s6_addr[1] & 0x20) +#define IPV6_ADDR_MC_FLAG_RENDEZVOUS(a) \ + ((a)->s6_addr[1] & 0x40) +#endif + /* * fragmentation header */ -- cgit v1.2.3-70-g09d2 From e4de9f9e8333fbbae951c6e068f501f955123cf0 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Tue, 15 Feb 2011 13:19:21 +0000 Subject: bridge: Allow mcast snooping for transient link local addresses too MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the multicast bridge snooping support is not active for link local multicast. I assume this has been done to leave important multicast data untouched, like IPv6 Neighborhood Discovery. In larger, bridged, local networks it could however be desirable to optimize for instance local multicast audio/video streaming too. With the transient flag in IPv6 multicast addresses we have an easy way to optimize such multimedia traffic without tempering with the high priority multicast data from well-known addresses. This patch alters the multicast bridge snooping for IPv6, to take effect for transient multicast addresses instead of non-link-local addresses. Signed-off-by: Linus Lüssing Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 9ce2af18770..1207a5a0688 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -37,10 +37,9 @@ rcu_dereference_protected(X, lockdep_is_held(&br->multicast_lock)) #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) -static inline int ipv6_is_local_multicast(const struct in6_addr *addr) +static inline int ipv6_is_transient_multicast(const struct in6_addr *addr) { - if (ipv6_addr_is_multicast(addr) && - IPV6_ADDR_MC_SCOPE(addr) <= IPV6_ADDR_SCOPE_LINKLOCAL) + if (ipv6_addr_is_multicast(addr) && IPV6_ADDR_MC_FLAG_TRANSIENT(addr)) return 1; return 0; } @@ -780,7 +779,7 @@ static int br_ip6_multicast_add_group(struct net_bridge *br, { struct br_ip br_group; - if (ipv6_is_local_multicast(group)) + if (!ipv6_is_transient_multicast(group)) return 0; ipv6_addr_copy(&br_group.u.ip6, group); @@ -1341,7 +1340,7 @@ static void br_ip6_multicast_leave_group(struct net_bridge *br, { struct br_ip br_group; - if (ipv6_is_local_multicast(group)) + if (!ipv6_is_transient_multicast(group)) return; ipv6_addr_copy(&br_group.u.ip6, group); -- cgit v1.2.3-70-g09d2 From 36cff5a10c6b003fa2d0464848d5664b2bf723e0 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Thu, 17 Feb 2011 08:17:51 +0000 Subject: bridge: Fix MLD queries' ethernet source address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Map the IPv6 header's destination multicast address to an ethernet source address instead of the MLD queries multicast address. For instance for a general MLD query (multicast address in the MLD query set to ::), this would wrongly be mapped to 33:33:00:00:00:00, although an MLD queries destination MAC should always be 33:33:00:00:00:01 which matches the IPv6 header's multicast destination ff02::1. Signed-off-by: Linus Lüssing Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 1207a5a0688..c1f24e4d082 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -434,7 +434,6 @@ static struct sk_buff *br_ip6_multicast_alloc_query(struct net_bridge *br, eth = eth_hdr(skb); memcpy(eth->h_source, br->dev->dev_addr, 6); - ipv6_eth_mc_map(group, eth->h_dest); eth->h_proto = htons(ETH_P_IPV6); skb_put(skb, sizeof(*eth)); @@ -448,6 +447,7 @@ static struct sk_buff *br_ip6_multicast_alloc_query(struct net_bridge *br, ip6h->hop_limit = 1; ipv6_addr_set(&ip6h->saddr, 0, 0, 0, 0); ipv6_addr_set(&ip6h->daddr, htonl(0xff020000), 0, 0, htonl(1)); + ipv6_eth_mc_map(&ip6h->daddr, eth->h_dest); hopopt = (u8 *)(ip6h + 1); hopopt[0] = IPPROTO_ICMPV6; /* next hdr */ -- cgit v1.2.3-70-g09d2 From fe29ec41aaa51902aebd63658dfb04fe6fea8be5 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Thu, 17 Feb 2011 08:17:52 +0000 Subject: bridge: Use IPv6 link-local address for multicast listener queries MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the bridge multicast snooping feature periodically issues IPv6 general multicast listener queries to sense the absence of a listener. For this, it uses :: as its source address - however RFC 2710 requires: "To be valid, the Query message MUST come from a link-local IPv6 Source Address". Current Linux kernel versions seem to follow this requirement and ignore our bogus MLD queries. With this commit a link local address from the bridge interface is being used to issue the MLD query, resulting in other Linux devices which are multicast listeners in the network to respond with a MLD response (which was not the case before). Signed-off-by: Linus Lüssing Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index c1f24e4d082..030a002ff8e 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -445,7 +445,8 @@ static struct sk_buff *br_ip6_multicast_alloc_query(struct net_bridge *br, ip6h->payload_len = htons(8 + sizeof(*mldq)); ip6h->nexthdr = IPPROTO_HOPOPTS; ip6h->hop_limit = 1; - ipv6_addr_set(&ip6h->saddr, 0, 0, 0, 0); + ipv6_dev_get_saddr(dev_net(br->dev), br->dev, &ip6h->daddr, 0, + &ip6h->saddr); ipv6_addr_set(&ip6h->daddr, htonl(0xff020000), 0, 0, htonl(1)); ipv6_eth_mc_map(&ip6h->daddr, eth->h_dest); -- cgit v1.2.3-70-g09d2 From 28801f351f76231e8d1e378274d6d56a577b897e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 16 Feb 2011 03:48:38 +0000 Subject: sfc: lower stack usage in efx_ethtool_self_test MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/net/sfc/ethtool.c: In function ‘efx_ethtool_self_test’: drivers/net/sfc/ethtool.c:613: warning: the frame size of 1200 bytes is larger than 1024 bytes Signed-off-by: Eric Dumazet Acked-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/ethtool.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index 0e8bb19ed60..ca886d98bdc 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -569,9 +569,14 @@ static void efx_ethtool_self_test(struct net_device *net_dev, struct ethtool_test *test, u64 *data) { struct efx_nic *efx = netdev_priv(net_dev); - struct efx_self_tests efx_tests; + struct efx_self_tests *efx_tests; int already_up; - int rc; + int rc = -ENOMEM; + + efx_tests = kzalloc(sizeof(*efx_tests), GFP_KERNEL); + if (!efx_tests) + goto fail; + ASSERT_RTNL(); if (efx->state != STATE_RUNNING) { @@ -589,13 +594,11 @@ static void efx_ethtool_self_test(struct net_device *net_dev, if (rc) { netif_err(efx, drv, efx->net_dev, "failed opening device.\n"); - goto fail2; + goto fail1; } } - memset(&efx_tests, 0, sizeof(efx_tests)); - - rc = efx_selftest(efx, &efx_tests, test->flags); + rc = efx_selftest(efx, efx_tests, test->flags); if (!already_up) dev_close(efx->net_dev); @@ -604,10 +607,11 @@ static void efx_ethtool_self_test(struct net_device *net_dev, rc == 0 ? "passed" : "failed", (test->flags & ETH_TEST_FL_OFFLINE) ? "off" : "on"); - fail2: - fail1: +fail1: /* Fill ethtool results structures */ - efx_ethtool_fill_self_tests(efx, &efx_tests, NULL, data); + efx_ethtool_fill_self_tests(efx, efx_tests, NULL, data); + kfree(efx_tests); +fail: if (rc) test->flags |= ETH_TEST_FL_FAILED; } -- cgit v1.2.3-70-g09d2 From 406e56c9dfa0e654870631cd4d9ea20391a527eb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Feb 2011 20:41:25 -0800 Subject: ASoC: Fix WM8958 default microphone detection argument ordering Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- sound/soc/codecs/wm8994.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index a60b5dbf015..ebaee5ca743 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3000,11 +3000,10 @@ static void wm8958_default_micdet(u16 status, void *data) report |= SND_JACK_BTN_5; done: - snd_soc_jack_report(wm8994->micdet[0].jack, + snd_soc_jack_report(wm8994->micdet[0].jack, report, SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5 | - SND_JACK_MICROPHONE | SND_JACK_VIDEOOUT, - report); + SND_JACK_MICROPHONE | SND_JACK_VIDEOOUT); } /** -- cgit v1.2.3-70-g09d2 From 8ceed344afab2d89516e6d52634ad81920762993 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Feb 2011 10:44:42 -0800 Subject: ASoC: Correct definition of WM8903_VMID_RES_5K Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- sound/soc/codecs/wm8903.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8903.h b/sound/soc/codecs/wm8903.h index e8490f3edd0..e3ec2433b21 100644 --- a/sound/soc/codecs/wm8903.h +++ b/sound/soc/codecs/wm8903.h @@ -165,7 +165,7 @@ extern int wm8903_mic_detect(struct snd_soc_codec *codec, #define WM8903_VMID_RES_50K 2 #define WM8903_VMID_RES_250K 3 -#define WM8903_VMID_RES_5K 4 +#define WM8903_VMID_RES_5K 6 /* * R8 (0x08) - Analogue DAC 0 -- cgit v1.2.3-70-g09d2 From cea2bc50a3dd88e43be2e926a9ae31ab7816bf2d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 18 Feb 2011 15:05:53 -0800 Subject: ASoC: Hook wm_hubs micbiases up to CLK_SYS The microphone detection functionality requires a clock to work. In any non-detection case where the MICBIAS is enabled CLK_SYS will be needed anyway so there is no negative impact on power consumption. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- sound/soc/codecs/wm_hubs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 613df5db0b3..51689270606 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -674,6 +674,9 @@ SND_SOC_DAPM_OUTPUT("LINEOUT2N"), }; static const struct snd_soc_dapm_route analogue_routes[] = { + { "MICBIAS1", NULL, "CLK_SYS" }, + { "MICBIAS2", NULL, "CLK_SYS" }, + { "IN1L PGA", "IN1LP Switch", "IN1LP" }, { "IN1L PGA", "IN1LN Switch", "IN1LN" }, -- cgit v1.2.3-70-g09d2 From 3a3675b7f23f83ca8c67c9c2b6edf707fd28d1ba Mon Sep 17 00:00:00 2001 From: Dan Rosenberg Date: Mon, 14 Feb 2011 13:45:28 +0000 Subject: xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1 The FSGEOMETRY_V1 ioctl (and its compat equivalent) calls out to xfs_fs_geometry() with a version number of 3. This code path does not fill in the logsunit member of the passed xfs_fsop_geom_t, leading to the leaking of four bytes of uninitialized stack data to potentially unprivileged callers. v2 switches to memset() to avoid future issues if structure members change, on suggestion of Dave Chinner. Signed-off-by: Dan Rosenberg Reviewed-by: Eugene Teo Signed-off-by: Alex Elder --- fs/xfs/xfs_fsops.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index cec89dd5d7d..85668efb3e3 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -53,6 +53,9 @@ xfs_fs_geometry( xfs_fsop_geom_t *geo, int new_version) { + + memset(geo, 0, sizeof(*geo)); + geo->blocksize = mp->m_sb.sb_blocksize; geo->rtextsize = mp->m_sb.sb_rextsize; geo->agblocks = mp->m_sb.sb_agblocks; -- cgit v1.2.3-70-g09d2 From be715140b5c3baf8ab6708060cfab80bef279d18 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Tue, 15 Feb 2011 17:07:36 +0000 Subject: xfs: check if device support discard in xfs_ioc_trim() Right now we, are relying on the fact that when we attempt to actually do the discard, blkdev_issue_discar() returns -EOPNOTSUPP and the user is informed that the device does not support discard. However, in the case where the we do not hit any suitable free extent to trim in FITRIM code, it will finish without any error. This is very confusing, because it seems that FITRIM was successful even though the device does not actually supports discard. Solution: Check for the discard support before attempt to search for free extents. Signed-off-by: Lukas Czerner Signed-off-by: Alex Elder --- fs/xfs/linux-2.6/xfs_discard.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/xfs/linux-2.6/xfs_discard.c b/fs/xfs/linux-2.6/xfs_discard.c index 05201ae719e..d61611c8801 100644 --- a/fs/xfs/linux-2.6/xfs_discard.c +++ b/fs/xfs/linux-2.6/xfs_discard.c @@ -152,6 +152,8 @@ xfs_ioc_trim( if (!capable(CAP_SYS_ADMIN)) return -XFS_ERROR(EPERM); + if (!blk_queue_discard(q)) + return -XFS_ERROR(EOPNOTSUPP); if (copy_from_user(&range, urange, sizeof(range))) return -XFS_ERROR(EFAULT); -- cgit v1.2.3-70-g09d2 From f10820e49585f281706ac07570a9e1652bdb5dd9 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 31 Jan 2011 15:09:23 +0100 Subject: i2c-stu300: make sure adapter-name is terminated Use strlcpy instead of strncpy. Signed-off-by: Wolfram Sang Cc: Linus Walleij Cc: Ben Dooks Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-stu300.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 495be451d32..266135ddf7f 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -942,7 +942,7 @@ stu300_probe(struct platform_device *pdev) adap->owner = THIS_MODULE; /* DDC class but actually often used for more generic I2C */ adap->class = I2C_CLASS_DDC; - strncpy(adap->name, "ST Microelectronics DDC I2C adapter", + strlcpy(adap->name, "ST Microelectronics DDC I2C adapter", sizeof(adap->name)); adap->nr = bus_nr; adap->algo = &stu300_algo; -- cgit v1.2.3-70-g09d2 From adf6e07922255937c8bfeea777d19502b4c9a2be Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 27 Jan 2011 16:18:41 -0800 Subject: i2c-omap: fix static suspend vs. runtime suspend When runtime PM is enabled, each OMAP i2c device is suspended after each i2c xfer. However, there are two cases when the static suspend methods must be used to ensure the devices are suspended: 1) runtime PM is disabled, either at compile time or dynamically via /sys/devices/.../power/control. 2) an i2c client driver uses i2c during it's suspend callback, thus leaving the i2c driver active (NOTE: runtime suspend transitions are disabled during system suspend, so i2c activity during system suspend will runtime resume the device, but not runtime (re)suspend it.) Since the actual work to suspend the device is handled by the subsytem, call the bus methods to take care of it. NOTE: This takes care of a known suspend problem on OMAP3 where the TWL RTC driver does i2c xfers during its suspend path leaving the i2c driver in an active state (since runtime suspend transistions are disabled.) Signed-off-by: Kevin Hilman Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index b605ff3a1fa..0541df90b9f 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1137,12 +1137,40 @@ omap_i2c_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_SUSPEND +static int omap_i2c_suspend(struct device *dev) +{ + if (!pm_runtime_suspended(dev)) + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend) + dev->bus->pm->runtime_suspend(dev); + + return 0; +} + +static int omap_i2c_resume(struct device *dev) +{ + if (!pm_runtime_suspended(dev)) + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume) + dev->bus->pm->runtime_resume(dev); + + return 0; +} + +static struct dev_pm_ops omap_i2c_pm_ops = { + .suspend = omap_i2c_suspend, + .resume = omap_i2c_resume, +}; +#else +#define omap_i2c_pm_ops NULL +#endif + static struct platform_driver omap_i2c_driver = { .probe = omap_i2c_probe, .remove = omap_i2c_remove, .driver = { .name = "omap_i2c", .owner = THIS_MODULE, + .pm = &omap_i2c_pm_ops, }, }; -- cgit v1.2.3-70-g09d2 From bd6a60afeb4c9ada3ff27f1d13db1a2b5c11d8c0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 21 Feb 2011 01:11:59 -0500 Subject: Revert "drm/radeon/kms: switch back to min->max pll post divider iteration" This reverts commit a6f9761743bf35b052180f4a8bdae4d2cc0465f6. Remove this commit as it is no longer necessary. The relevant bugs were fixed properly in: drm/radeon/kms: hopefully fix pll issues for real (v3) 5b40ddf888398ce4cccbf3b9d0a18d90149ed7ff drm/radeon/kms: add missing frac fb div flag for dce4+ 9f4283f49f0a96a64c5a45fe56f0f8c942885eef This commit also broke certain ~5 Mhz modes on old arcade monitors, so reverting this commit fixes: https://bugzilla.kernel.org/show_bug.cgi?id=29502 Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 0e657095de7..3e7e7f9eb78 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -971,7 +971,7 @@ void radeon_compute_pll_legacy(struct radeon_pll *pll, max_fractional_feed_div = pll->max_frac_feedback_div; } - for (post_div = min_post_div; post_div <= max_post_div; ++post_div) { + for (post_div = max_post_div; post_div >= min_post_div; --post_div) { uint32_t ref_div; if ((pll->flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1)) -- cgit v1.2.3-70-g09d2 From e40b6fc8373314666e7853733dc0ca4049a68b95 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 18 Feb 2011 15:51:57 +1000 Subject: drm/radeon/kms: align height of fb allocation. this aligns the height of the fb allocation so it doesn't trip over the size checks later when we use this from userspace to copy the buffer at X start. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_fb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index 66324b5bb5b..cc44bdfec80 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -113,11 +113,14 @@ static int radeonfb_create_pinned_object(struct radeon_fbdev *rfbdev, u32 tiling_flags = 0; int ret; int aligned_size, size; + int height = mode_cmd->height; /* need to align pitch with crtc limits */ mode_cmd->pitch = radeon_align_pitch(rdev, mode_cmd->width, mode_cmd->bpp, fb_tiled) * ((mode_cmd->bpp + 1) / 8); - size = mode_cmd->pitch * mode_cmd->height; + if (rdev->family >= CHIP_R600) + height = ALIGN(mode_cmd->height, 8); + size = mode_cmd->pitch * height; aligned_size = ALIGN(size, PAGE_SIZE); ret = radeon_gem_object_create(rdev, aligned_size, 0, RADEON_GEM_DOMAIN_VRAM, -- cgit v1.2.3-70-g09d2 From c4cc383915549cf14f027f374904e30c13653dac Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Mon, 21 Feb 2011 05:42:00 +0100 Subject: drm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns) Use of abs() wrongly wrapped diff_ns to 32 bit, which gives a 1/4000 probability of a missed vblank increment at each vblank irq reenable if the kms driver doesn't support high precision vblank timestamping. Not a big deal in practice, but let's make it nice. Signed-off-by: Mario Kleiner Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 3dadfa2a852..6d2d4faf867 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -164,7 +164,7 @@ static void vblank_disable_and_save(struct drm_device *dev, int crtc) * available. In that case we can't account for this and just * hope for the best. */ - if ((vblrc > 0) && (abs(diff_ns) > 1000000)) + if ((vblrc > 0) && (abs64(diff_ns) > 1000000)) atomic_inc(&dev->_vblank_count[crtc]); /* Invalidate all timestamps while vblank irq's are off. */ @@ -1293,7 +1293,7 @@ bool drm_handle_vblank(struct drm_device *dev, int crtc) * e.g., due to spurious vblank interrupts. We need to * ignore those for accounting. */ - if (abs(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) { + if (abs64(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) { /* Store new timestamp in ringbuffer. */ vblanktimestamp(dev, crtc, vblcount + 1) = tvblank; smp_wmb(); -- cgit v1.2.3-70-g09d2 From bc21512835a72bc1eab7abd7d8a1bff0435591d7 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Mon, 21 Feb 2011 05:42:01 +0100 Subject: drm/vblank: Use memory barriers optimized for atomic_t instead of generics. Documentation/atomic_ops.txt tells us that there are memory barriers optimized for atomic_inc and other atomic_t ops. Use these instead of smp_wmb(), and also to make the required memory barriers around vblank counter increments more explicit. Signed-off-by: Mario Kleiner Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 6d2d4faf867..22f3bf5ecbd 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -164,8 +164,10 @@ static void vblank_disable_and_save(struct drm_device *dev, int crtc) * available. In that case we can't account for this and just * hope for the best. */ - if ((vblrc > 0) && (abs64(diff_ns) > 1000000)) + if ((vblrc > 0) && (abs64(diff_ns) > 1000000)) { atomic_inc(&dev->_vblank_count[crtc]); + smp_mb__after_atomic_inc(); + } /* Invalidate all timestamps while vblank irq's are off. */ clear_vblank_timestamps(dev, crtc); @@ -858,10 +860,11 @@ static void drm_update_vblank_count(struct drm_device *dev, int crtc) if (rc) { tslot = atomic_read(&dev->_vblank_count[crtc]) + diff; vblanktimestamp(dev, crtc, tslot) = t_vblank; - smp_wmb(); } + smp_mb__before_atomic_inc(); atomic_add(diff, &dev->_vblank_count[crtc]); + smp_mb__after_atomic_inc(); } /** @@ -1296,12 +1299,13 @@ bool drm_handle_vblank(struct drm_device *dev, int crtc) if (abs64(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) { /* Store new timestamp in ringbuffer. */ vblanktimestamp(dev, crtc, vblcount + 1) = tvblank; - smp_wmb(); /* Increment cooked vblank count. This also atomically commits * the timestamp computed above. */ + smp_mb__before_atomic_inc(); atomic_inc(&dev->_vblank_count[crtc]); + smp_mb__after_atomic_inc(); } else { DRM_DEBUG("crtc %d: Redundant vblirq ignored. diff_ns = %d\n", crtc, (int) diff_ns); -- cgit v1.2.3-70-g09d2 From 9be6f8a978bdcbab46474a125aa4212516b71fe7 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Mon, 21 Feb 2011 05:42:02 +0100 Subject: drm/vblank: Enable precise vblank timestamps for interlaced and doublescan modes. Testing showed the current code can already handle doublescan video modes just fine. A trivial tweak makes it work for interlaced scanout as well. Tested and shown to be precise on Radeon rv530, r600 and Intel 945-GME. Signed-off-by: Mario Kleiner Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 22f3bf5ecbd..53120a72a48 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -493,6 +493,12 @@ void drm_calc_timestamping_constants(struct drm_crtc *crtc) /* Dot clock in Hz: */ dotclock = (u64) crtc->hwmode.clock * 1000; + /* Fields of interlaced scanout modes are only halve a frame duration. + * Double the dotclock to get halve the frame-/line-/pixelduration. + */ + if (crtc->hwmode.flags & DRM_MODE_FLAG_INTERLACE) + dotclock *= 2; + /* Valid dotclock? */ if (dotclock > 0) { /* Convert scanline length in pixels and video dot clock to @@ -605,14 +611,6 @@ int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, int crtc, return -EAGAIN; } - /* Don't know yet how to handle interlaced or - * double scan modes. Just no-op for now. - */ - if (mode->flags & (DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLSCAN)) { - DRM_DEBUG("crtc %d: Noop due to unsupported mode.\n", crtc); - return -ENOTSUPP; - } - /* Get current scanout position with system timestamp. * Repeat query up to DRM_TIMESTAMP_MAXRETRIES times * if single query takes longer than max_error nanoseconds. -- cgit v1.2.3-70-g09d2 From 40f2a2fabbeffa4d47c3d904b8c94a0adb07acce Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sat, 19 Feb 2011 22:35:55 +0100 Subject: drm: drop commented out code and preceding comment r100_gpu_init() was dropped in 90aca4d ("drm/radeon/kms: simplify & improve GPU reset V2") but here it was only commented out. Signed-off-by: Paul Bolle Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 56deae5bf02..be817f891ec 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3801,8 +3801,6 @@ static int r100_startup(struct radeon_device *rdev) r100_mc_program(rdev); /* Resume clock */ r100_clock_startup(rdev); - /* Initialize GPU configuration (# pipes, ...) */ -// r100_gpu_init(rdev); /* Initialize GART (initialize after TTM so we can allocate * memory through TTM but finalize after TTM) */ r100_enable_bm(rdev); -- cgit v1.2.3-70-g09d2 From 45e4039c3aea597ede44a264cea322908cdedfe9 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 20 Feb 2011 21:57:32 +0000 Subject: drm/radeon: fix regression with AA resolve checking Some userspaces can emit a whole packet without disabling AA resolve by the looks of it, so we have to deal with them. Signed-off-by: Dave Airlie Tested-by: Jorg Otte --- drivers/gpu/drm/radeon/r100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index be817f891ec..93fa735c8c1 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3490,7 +3490,7 @@ void r100_cs_track_clear(struct radeon_device *rdev, struct r100_cs_track *track track->num_texture = 16; track->maxy = 4096; track->separate_cube = 0; - track->aaresolve = true; + track->aaresolve = false; track->aa.robj = NULL; } -- cgit v1.2.3-70-g09d2 From f72487e7a1827f5e95425b80ec4fcc4f928329e8 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Tue, 22 Feb 2011 12:25:39 +0530 Subject: i2c-omap: fix build for !CONFIG_SUSPEND fix the build break when !CONFIG_SUSPEND drivers/i2c/busses/i2c-omap.c:1173: error: lvalue required as unary '&' operand make[3]: *** [drivers/i2c/busses/i2c-omap.o] Error 1 make[2]: *** [drivers/i2c/busses] Error 2 make[1]: *** [drivers/i2c] Error 2 make: *** [drivers] Error 2 Signed-off-by: Balaji T K Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 0541df90b9f..adc1ee53b1a 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1160,8 +1160,9 @@ static struct dev_pm_ops omap_i2c_pm_ops = { .suspend = omap_i2c_suspend, .resume = omap_i2c_resume, }; +#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops) #else -#define omap_i2c_pm_ops NULL +#define OMAP_I2C_PM_OPS NULL #endif static struct platform_driver omap_i2c_driver = { @@ -1170,7 +1171,7 @@ static struct platform_driver omap_i2c_driver = { .driver = { .name = "omap_i2c", .owner = THIS_MODULE, - .pm = &omap_i2c_pm_ops, + .pm = OMAP_I2C_PM_OPS, }, }; -- cgit v1.2.3-70-g09d2 From cb527ede1bf6ff2008a025606f25344b8ed7b4ac Mon Sep 17 00:00:00 2001 From: Richard woodruff Date: Wed, 16 Feb 2011 10:24:16 +0530 Subject: i2c-omap: Double clear of ARDY status in IRQ handler This errata occurs when the ARDY interrupt generation is enabled. At the begining of every new transaction the ARDY interrupt is cleared. On continuous i2c transactions where after clearing the ARDY bit from I2C_STAT register (clearing the interrupt), the IRQ line is reasserted and the I2C_STAT[ARDY] bit set again on 1. In fact, the ARDY status bit is not cleared at the write access to I2C_STAT[ARDY] and only the IRQ line is deasserted and then reasserted. This is not captured in the usual errata documents. The workaround is to have a double clear of ARDY status in irq handler. Signed-off-by: Richard woodruff Signed-off-by: Keerthy Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index adc1ee53b1a..e3f925ac1c3 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -847,11 +847,15 @@ complete: dev_err(dev->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; } + /* + * ProDB0017052: Clear ARDY bit twice + */ if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR | - OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); + OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR | + OMAP_I2C_STAT_ARDY)); omap_i2c_complete_cmd(dev, err); return IRQ_HANDLED; } -- cgit v1.2.3-70-g09d2 From a5a595cc36bbbe16f6a3f0e6968f94a0604bfd28 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 23 Feb 2011 00:43:55 +0000 Subject: i2c-omap: fixup commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac whitespace Fixup the whitespace error noticed in cb527ede1bf6ff2008a025606f25344b8ed7b4ac Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index e3f925ac1c3..829a2a1029f 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -847,9 +847,9 @@ complete: dev_err(dev->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; } - /* + /* * ProDB0017052: Clear ARDY bit twice - */ + */ if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, stat & -- cgit v1.2.3-70-g09d2 From 8212a49d1c1e53ad2bc3176b983a2483b48fd989 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 8 Feb 2011 13:55:59 -0800 Subject: USB: xhci: mark local functions as static Functions that are not used outsde of the module they are defined should be marked as static. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-dbg.c | 4 ++-- drivers/usb/host/xhci-mem.c | 4 ++-- drivers/usb/host/xhci.c | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 582937e2132..0231814a97a 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -450,7 +450,7 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci, } } -void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) +static void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { /* Fields are 32 bits wide, DMA addresses are in bytes */ int field_size = 32 / 8; @@ -489,7 +489,7 @@ void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) dbg_rsvd64(xhci, (u64 *)slot_ctx, dma); } -void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, +static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep) { diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index dbb8bcd3919..a9534396e85 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -307,7 +307,7 @@ struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, /***************** Streams structures manipulation *************************/ -void xhci_free_stream_ctx(struct xhci_hcd *xhci, +static void xhci_free_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, struct xhci_stream_ctx *stream_ctx, dma_addr_t dma) { @@ -335,7 +335,7 @@ void xhci_free_stream_ctx(struct xhci_hcd *xhci, * The stream context array must be a power of 2, and can be as small as * 64 bytes or as large as 1MB. */ -struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, +static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, dma_addr_t *dma, gfp_t mem_flags) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 9784880df58..2083fc2179b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -109,7 +109,7 @@ int xhci_halt(struct xhci_hcd *xhci) /* * Set the run bit and wait for the host to be running. */ -int xhci_start(struct xhci_hcd *xhci) +static int xhci_start(struct xhci_hcd *xhci) { u32 temp; int ret; @@ -329,7 +329,7 @@ int xhci_init(struct usb_hcd *hcd) #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING -void xhci_event_ring_work(unsigned long arg) +static void xhci_event_ring_work(unsigned long arg) { unsigned long flags; int temp; @@ -857,7 +857,7 @@ unsigned int xhci_last_valid_endpoint(u32 added_ctxs) /* Returns 1 if the arguments are OK; * returns 0 this is a root hub; returns -EINVAL for NULL pointers. */ -int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, +static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev, const char *func) { struct xhci_hcd *xhci; @@ -1693,7 +1693,7 @@ static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci, xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags)); } -void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, +static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state) { -- cgit v1.2.3-70-g09d2 From ea68c00e2623bb5b001c2117a4dcca4754781b4e Mon Sep 17 00:00:00 2001 From: John Ogness Date: Tue, 22 Feb 2011 20:00:47 -0700 Subject: OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL In OMAP35X TRM Rev 2010-05 Figure 7-18 "DPLL With EMI Reduction Feature", it is shown that the internal frequency is calculated by CLK_IN/(N+1). However, the value passed to _dpll_test_fint() is already "N+1" since Linux is using the values to divide by. In the technical reference manual, "N" is referring to the divider's register value (0-127). During power management testing, it was observed that programming the wrong jitter correction value can cause the system to become unstable and eventually crash. Signed-off-by: John Ogness [paul@pwsan.com: added second paragraph to commit message] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clkt_dpll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 337392c3f54..acb7ae5b0a2 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -77,7 +77,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n) dd = clk->dpll_data; /* DPLL divider must result in a valid jitter correction val */ - fint = clk->parent->rate / (n + 1); + fint = clk->parent->rate / n; if (fint < DPLL_FINT_BAND1_MIN) { pr_debug("rejecting n=%d due to Fint failure, " -- cgit v1.2.3-70-g09d2 From 382225e62bdb8059b7f915b133426425516dd300 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 22 Feb 2011 10:21:18 +0100 Subject: ALSA: usb-audio: fix oops due to cleanup race when disconnecting When a USB audio device is disconnected, snd_usb_audio_disconnect() kills all audio URBs. At the same time, the application, after being notified of the disconnection, might close the device, in which case ALSA calls the .hw_free callback, which should free the URBs too. Commit de1b8b93a0ba "[ALSA] Fix hang-up at disconnection of usb-audio" prevented snd_usb_hw_free() from freeing the URBs to avoid a hang that resulted from this race, but this introduced another race because the URB callbacks could now be executed after snd_usb_hw_free() has returned, and try to access already freed data. Fix the first race by introducing a mutex to serialize the disconnect callback and all PCM callbacks that manage URBs (hw_free and hw_params). Reported-and-tested-by: Pierre-Louis Bossart Cc: [CL: also serialize hw_params callback] Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/usb/card.c | 4 ++++ sound/usb/pcm.c | 7 +++++-- sound/usb/usbaudio.h | 1 + 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index 800f7cb4f25..c0f8270bc19 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -323,6 +323,7 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx, return -ENOMEM; } + mutex_init(&chip->shutdown_mutex); chip->index = idx; chip->dev = dev; chip->card = card; @@ -531,6 +532,7 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, void *ptr) chip = ptr; card = chip->card; mutex_lock(®ister_mutex); + mutex_lock(&chip->shutdown_mutex); chip->shutdown = 1; chip->num_interfaces--; if (chip->num_interfaces <= 0) { @@ -548,9 +550,11 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, void *ptr) snd_usb_mixer_disconnect(p); } usb_chip[chip->index] = NULL; + mutex_unlock(&chip->shutdown_mutex); mutex_unlock(®ister_mutex); snd_card_free_when_closed(card); } else { + mutex_unlock(&chip->shutdown_mutex); mutex_unlock(®ister_mutex); } } diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 4132522ac90..e3f680526cb 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -361,6 +361,7 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, } if (changed) { + mutex_lock(&subs->stream->chip->shutdown_mutex); /* format changed */ snd_usb_release_substream_urbs(subs, 0); /* influenced: period_bytes, channels, rate, format, */ @@ -368,6 +369,7 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, params_rate(hw_params), snd_pcm_format_physical_width(params_format(hw_params)) * params_channels(hw_params)); + mutex_unlock(&subs->stream->chip->shutdown_mutex); } return ret; @@ -385,8 +387,9 @@ static int snd_usb_hw_free(struct snd_pcm_substream *substream) subs->cur_audiofmt = NULL; subs->cur_rate = 0; subs->period_bytes = 0; - if (!subs->stream->chip->shutdown) - snd_usb_release_substream_urbs(subs, 0); + mutex_lock(&subs->stream->chip->shutdown_mutex); + snd_usb_release_substream_urbs(subs, 0); + mutex_unlock(&subs->stream->chip->shutdown_mutex); return snd_pcm_lib_free_vmalloc_buffer(substream); } diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index db3eb21627e..6e66fffe87f 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -36,6 +36,7 @@ struct snd_usb_audio { struct snd_card *card; u32 usb_id; int shutdown; + struct mutex shutdown_mutex; unsigned int txfr_quirk:1; /* Subframe boundaries on transfers */ int num_interfaces; int num_suspended_intf; -- cgit v1.2.3-70-g09d2 From 49495d44dfa4ba76cf7d1ed8fe84746dd9552255 Mon Sep 17 00:00:00 2001 From: Florian Mickler Date: Mon, 7 Feb 2011 23:29:31 +0100 Subject: amd64-agp: fix crash at second module load The module forgot to sometimes unregister some resources. This fixes Bug #22882. [Patch updated to 2.6.38-rc3 by Randy Dunlap.] Tested-by: Randy Dunlap Signed-off-by: Florian Mickler Signed-off-by: Dave Airlie --- drivers/char/agp/amd64-agp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 9252e85706e..780498d7658 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -773,18 +773,23 @@ int __init agp_amd64_init(void) #else printk(KERN_INFO PFX "You can boot with agp=try_unsupported\n"); #endif + pci_unregister_driver(&agp_amd64_pci_driver); return -ENODEV; } /* First check that we have at least one AMD64 NB */ - if (!pci_dev_present(amd_nb_misc_ids)) + if (!pci_dev_present(amd_nb_misc_ids)) { + pci_unregister_driver(&agp_amd64_pci_driver); return -ENODEV; + } /* Look for any AGP bridge */ agp_amd64_pci_driver.id_table = agp_amd64_pci_promisc_table; err = driver_attach(&agp_amd64_pci_driver.driver); - if (err == 0 && agp_bridges_found == 0) + if (err == 0 && agp_bridges_found == 0) { + pci_unregister_driver(&agp_amd64_pci_driver); err = -ENODEV; + } } return err; } -- cgit v1.2.3-70-g09d2 From 6da8b51657a9cd5a87b4e6e4c7bc76b598a95175 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 8 Feb 2011 07:16:06 +0100 Subject: ALSA: HDA: Add a new Conexant codec 506e (20590) Conexant 506e/20590 has the same graph as the rest of the 5066 family. BugLink: http://bugs.launchpad.net/bugs/723672 Cc: stable@kernel.org Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index dd7c5c12225..909ce9e0944 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3937,6 +3937,8 @@ static struct hda_codec_preset snd_hda_preset_conexant[] = { .patch = patch_cxt5066 }, { .id = 0x14f15069, .name = "CX20585", .patch = patch_cxt5066 }, + { .id = 0x14f1506e, .name = "CX20590", + .patch = patch_cxt5066 }, { .id = 0x14f15097, .name = "CX20631", .patch = patch_conexant_auto }, { .id = 0x14f15098, .name = "CX20632", @@ -3963,6 +3965,7 @@ MODULE_ALIAS("snd-hda-codec-id:14f15066"); MODULE_ALIAS("snd-hda-codec-id:14f15067"); MODULE_ALIAS("snd-hda-codec-id:14f15068"); MODULE_ALIAS("snd-hda-codec-id:14f15069"); +MODULE_ALIAS("snd-hda-codec-id:14f1506e"); MODULE_ALIAS("snd-hda-codec-id:14f15097"); MODULE_ALIAS("snd-hda-codec-id:14f15098"); MODULE_ALIAS("snd-hda-codec-id:14f150a1"); -- cgit v1.2.3-70-g09d2 From ebbd224c22a00dbbee95031a0d6d595460f6f2b3 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 23 Feb 2011 13:15:56 +0100 Subject: ALSA: HDA: Add ideapad quirk for two Dell machines These two Dell machines have been reported working well with the ideapad model. BugLink: http://bugs.launchpad.net/bugs/723676 Cc: stable@kernel.org Tested-by: David Chen Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 909ce9e0944..4d5004e693f 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3114,6 +3114,8 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0401, "Dell Vostro 1014", CXT5066_DELL_VOSTRO), SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO), SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD), + SND_PCI_QUIRK(0x1028, 0x050f, "Dell Inspiron", CXT5066_IDEAPAD), + SND_PCI_QUIRK(0x1028, 0x0510, "Dell Vostro", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP), SND_PCI_QUIRK(0x1043, 0x13f3, "Asus A52J", CXT5066_ASUS), SND_PCI_QUIRK(0x1043, 0x1643, "Asus K52JU", CXT5066_ASUS), -- cgit v1.2.3-70-g09d2 From f19e0eec8b82faae4c2a5d129dfa9fe1cf66f5a9 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Wed, 23 Feb 2011 13:04:25 +0100 Subject: Drop redundant __param section for CRISv32. The __param section is already brought in by RODATA above. Signed-off-by: Jesper Nilsson Signed-off-by: Linus Torvalds --- arch/cris/kernel/vmlinux.lds.S | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S index 442218980db..c49be845f96 100644 --- a/arch/cris/kernel/vmlinux.lds.S +++ b/arch/cris/kernel/vmlinux.lds.S @@ -72,11 +72,6 @@ SECTIONS INIT_TEXT_SECTION(PAGE_SIZE) .init.data : { INIT_DATA } .init.setup : { INIT_SETUP(16) } -#ifdef CONFIG_ETRAX_ARCH_V32 - __start___param = .; - __param : { *(__param) } - __stop___param = .; -#endif .initcall.init : { INIT_CALLS } -- cgit v1.2.3-70-g09d2 From 9bb794ae0509f39abad6593793ec86d490bad31b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 22 Feb 2011 20:15:07 -0800 Subject: Input: synaptics - document 0x0c query Since Synaptics technical writers department is a bit slow releasing updated Synaptics interface guide, let's add some new bits (with their blessing) to the code so that they don't get lost. Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 25e5d042a72..7453938bf5e 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -51,6 +51,29 @@ #define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20) #define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12) #define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16) + +/* + * The following describes response for the 0x0c query. + * + * byte mask name meaning + * ---- ---- ------- ------------ + * 1 0x01 adjustable threshold capacitive button sensitivity + * can be adjusted + * 1 0x02 report max query 0x0d gives max coord reported + * 1 0x04 clearpad sensor is ClearPad product + * 1 0x08 advanced gesture not particularly meaningful + * 1 0x10 clickpad bit 0 1-button ClickPad + * 1 0x60 multifinger mode identifies firmware finger counting + * (not reporting!) algorithm. + * Not particularly meaningful + * 1 0x80 covered pad W clipped to 14, 15 == pad mostly covered + * 2 0x01 clickpad bit 1 2-button ClickPad + * 2 0x02 deluxe LED controls touchpad support LED commands + * ala multimedia control bar + * 2 0x04 reduced filtering firmware does less filtering on + * position data, driver should watch + * for noise. + */ #define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */ #define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */ #define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000) -- cgit v1.2.3-70-g09d2 From 1d64b655dc083df5c5ac39945ccbbc6532903bf1 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 23 Feb 2011 08:51:28 -0800 Subject: Input: serio/gameport - use 'long' system workqueue Commit 8ee294cd9def0004887da7f44b80563493b0a097 converted serio subsystem event handling from using a dedicated thread to using common workqueue. Unfortunately, this regressed our boot times, due to the fact that serio jobs take long time to execute. While the new concurrency managed workqueue code manages long-playing works just fine and schedules additional workers as needed, such works wreck havoc among remaining users of flush_scheduled_work(). To solve this problem let's move serio/gameport works from system_wq to system_long_wq which nobody tries to flush. Reported-and-tested-by: Hernando Torque Acked-by: Tejun Heo Signed-off-by: Dmitry Torokhov --- drivers/input/gameport/gameport.c | 2 +- drivers/input/serio/serio.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c index dbf741c9583..ce57ede6e98 100644 --- a/drivers/input/gameport/gameport.c +++ b/drivers/input/gameport/gameport.c @@ -360,7 +360,7 @@ static int gameport_queue_event(void *object, struct module *owner, event->owner = owner; list_add_tail(&event->node, &gameport_event_list); - schedule_work(&gameport_event_work); + queue_work(system_long_wq, &gameport_event_work); out: spin_unlock_irqrestore(&gameport_event_lock, flags); diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index 7c38d1fbabf..ba70058e2be 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -299,7 +299,7 @@ static int serio_queue_event(void *object, struct module *owner, event->owner = owner; list_add_tail(&event->node, &serio_event_list); - schedule_work(&serio_event_work); + queue_work(system_long_wq, &serio_event_work); out: spin_unlock_irqrestore(&serio_event_lock, flags); -- cgit v1.2.3-70-g09d2 From ec29ed5b407d618a8128f5942aade9e1758aa14b Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Wed, 23 Feb 2011 16:23:20 -0500 Subject: Btrfs: fix fiemap bugs with delalloc The Btrfs fiemap code wasn't properly returning delalloc extents, so applications that trust fiemap to decide if there are holes in the file see holes instead of delalloc. This reworks the btrfs fiemap code, adding a get_extent helper that searches for delalloc ranges and also adding a helper for extent_fiemap that skips past holes in the file. Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 138 ++++++++++++++++++++++++++++++++++++--------------- fs/btrfs/extent_io.h | 2 +- fs/btrfs/inode.c | 126 +++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 224 insertions(+), 42 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index e7aeba24270..ff45b80d90f 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1433,12 +1433,13 @@ int extent_clear_unlock_delalloc(struct inode *inode, */ u64 count_range_bits(struct extent_io_tree *tree, u64 *start, u64 search_end, u64 max_bytes, - unsigned long bits) + unsigned long bits, int contig) { struct rb_node *node; struct extent_state *state; u64 cur_start = *start; u64 total_bytes = 0; + u64 last = 0; int found = 0; if (search_end <= cur_start) { @@ -1463,7 +1464,9 @@ u64 count_range_bits(struct extent_io_tree *tree, state = rb_entry(node, struct extent_state, rb_node); if (state->start > search_end) break; - if (state->end >= cur_start && (state->state & bits)) { + if (contig && found && state->start > last + 1) + break; + if (state->end >= cur_start && (state->state & bits) == bits) { total_bytes += min(search_end, state->end) + 1 - max(cur_start, state->start); if (total_bytes >= max_bytes) @@ -1472,6 +1475,9 @@ u64 count_range_bits(struct extent_io_tree *tree, *start = state->start; found = 1; } + last = state->end; + } else if (contig && found) { + break; } node = rb_next(node); if (!node) @@ -2912,6 +2918,46 @@ out: return sector; } +/* + * helper function for fiemap, which doesn't want to see any holes. + * This maps until we find something past 'last' + */ +static struct extent_map *get_extent_skip_holes(struct inode *inode, + u64 offset, + u64 last, + get_extent_t *get_extent) +{ + u64 sectorsize = BTRFS_I(inode)->root->sectorsize; + struct extent_map *em; + u64 len; + + if (offset >= last) + return NULL; + + while(1) { + len = last - offset; + if (len == 0) + break; + len = (len + sectorsize - 1) & ~(sectorsize - 1); + em = get_extent(inode, NULL, 0, offset, len, 0); + if (!em || IS_ERR(em)) + return em; + + /* if this isn't a hole return it */ + if (!test_bit(EXTENT_FLAG_VACANCY, &em->flags) && + em->block_start != EXTENT_MAP_HOLE) { + return em; + } + + /* this is a hole, advance to the next extent */ + offset = extent_map_end(em); + free_extent_map(em); + if (offset >= last) + break; + } + return NULL; +} + int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, __u64 start, __u64 len, get_extent_t *get_extent) { @@ -2921,16 +2967,19 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, u32 flags = 0; u32 found_type; u64 last; + u64 last_for_get_extent = 0; u64 disko = 0; + u64 isize = i_size_read(inode); struct btrfs_key found_key; struct extent_map *em = NULL; struct extent_state *cached_state = NULL; struct btrfs_path *path; struct btrfs_file_extent_item *item; int end = 0; - u64 em_start = 0, em_len = 0; + u64 em_start = 0; + u64 em_len = 0; + u64 em_end = 0; unsigned long emflags; - int hole = 0; if (len == 0) return -EINVAL; @@ -2940,6 +2989,10 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, return -ENOMEM; path->leave_spinning = 1; + /* + * lookup the last file extent. We're not using i_size here + * because there might be preallocation past i_size + */ ret = btrfs_lookup_file_extent(NULL, BTRFS_I(inode)->root, path, inode->i_ino, -1, 0); if (ret < 0) { @@ -2953,18 +3006,38 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, btrfs_item_key_to_cpu(path->nodes[0], &found_key, path->slots[0]); found_type = btrfs_key_type(&found_key); - /* No extents, just return */ + /* No extents, but there might be delalloc bits */ if (found_key.objectid != inode->i_ino || found_type != BTRFS_EXTENT_DATA_KEY) { - btrfs_free_path(path); - return 0; + /* have to trust i_size as the end */ + last = (u64)-1; + last_for_get_extent = isize; + } else { + /* + * remember the start of the last extent. There are a + * bunch of different factors that go into the length of the + * extent, so its much less complex to remember where it started + */ + last = found_key.offset; + last_for_get_extent = last + 1; } - last = found_key.offset; btrfs_free_path(path); + /* + * we might have some extents allocated but more delalloc past those + * extents. so, we trust isize unless the start of the last extent is + * beyond isize + */ + if (last < isize) { + last = (u64)-1; + last_for_get_extent = isize; + } + lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0, &cached_state, GFP_NOFS); - em = get_extent(inode, NULL, 0, off, max - off, 0); + + em = get_extent_skip_holes(inode, off, last_for_get_extent, + get_extent); if (!em) goto out; if (IS_ERR(em)) { @@ -2973,19 +3046,14 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, } while (!end) { - hole = 0; - off = em->start + em->len; + off = extent_map_end(em); if (off >= max) end = 1; - if (em->block_start == EXTENT_MAP_HOLE) { - hole = 1; - goto next; - } - em_start = em->start; em_len = em->len; - + em_end = extent_map_end(em); + emflags = em->flags; disko = 0; flags = 0; @@ -3004,37 +3072,29 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) flags |= FIEMAP_EXTENT_ENCODED; -next: - emflags = em->flags; free_extent_map(em); em = NULL; - if (!end) { - em = get_extent(inode, NULL, 0, off, max - off, 0); - if (!em) - goto out; - if (IS_ERR(em)) { - ret = PTR_ERR(em); - goto out; - } - emflags = em->flags; - } - - if (test_bit(EXTENT_FLAG_VACANCY, &emflags)) { + if ((em_start >= last) || em_len == (u64)-1 || + (last == (u64)-1 && isize <= em_end)) { flags |= FIEMAP_EXTENT_LAST; end = 1; } - if (em_start == last) { + /* now scan forward to see if this is really the last extent. */ + em = get_extent_skip_holes(inode, off, last_for_get_extent, + get_extent); + if (IS_ERR(em)) { + ret = PTR_ERR(em); + goto out; + } + if (!em) { flags |= FIEMAP_EXTENT_LAST; end = 1; } - - if (!hole) { - ret = fiemap_fill_next_extent(fieinfo, em_start, disko, - em_len, flags); - if (ret) - goto out_free; - } + ret = fiemap_fill_next_extent(fieinfo, em_start, disko, + em_len, flags); + if (ret) + goto out_free; } out_free: free_extent_map(em); diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index 7083cfafd06..9318dfefd59 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -191,7 +191,7 @@ void extent_io_exit(void); u64 count_range_bits(struct extent_io_tree *tree, u64 *start, u64 search_end, - u64 max_bytes, unsigned long bits); + u64 max_bytes, unsigned long bits, int contig); void free_extent_state(struct extent_state *state); int test_range_bit(struct extent_io_tree *tree, u64 start, u64 end, diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8d392ed73d5..44b926646e3 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1913,7 +1913,7 @@ static int btrfs_clean_io_failures(struct inode *inode, u64 start) private = 0; if (count_range_bits(&BTRFS_I(inode)->io_failure_tree, &private, - (u64)-1, 1, EXTENT_DIRTY)) { + (u64)-1, 1, EXTENT_DIRTY, 0)) { ret = get_state_private(&BTRFS_I(inode)->io_failure_tree, start, &private_failure); if (ret == 0) { @@ -5282,6 +5282,128 @@ out: return em; } +struct extent_map *btrfs_get_extent_fiemap(struct inode *inode, struct page *page, + size_t pg_offset, u64 start, u64 len, + int create) +{ + struct extent_map *em; + struct extent_map *hole_em = NULL; + u64 range_start = start; + u64 end; + u64 found; + u64 found_end; + int err = 0; + + em = btrfs_get_extent(inode, page, pg_offset, start, len, create); + if (IS_ERR(em)) + return em; + if (em) { + /* + * if our em maps to a hole, there might + * actually be delalloc bytes behind it + */ + if (em->block_start != EXTENT_MAP_HOLE) + return em; + else + hole_em = em; + } + + /* check to see if we've wrapped (len == -1 or similar) */ + end = start + len; + if (end < start) + end = (u64)-1; + else + end -= 1; + + em = NULL; + + /* ok, we didn't find anything, lets look for delalloc */ + found = count_range_bits(&BTRFS_I(inode)->io_tree, &range_start, + end, len, EXTENT_DELALLOC, 1); + found_end = range_start + found; + if (found_end < range_start) + found_end = (u64)-1; + + /* + * we didn't find anything useful, return + * the original results from get_extent() + */ + if (range_start > end || found_end <= start) { + em = hole_em; + hole_em = NULL; + goto out; + } + + /* adjust the range_start to make sure it doesn't + * go backwards from the start they passed in + */ + range_start = max(start,range_start); + found = found_end - range_start; + + if (found > 0) { + u64 hole_start = start; + u64 hole_len = len; + + em = alloc_extent_map(GFP_NOFS); + if (!em) { + err = -ENOMEM; + goto out; + } + /* + * when btrfs_get_extent can't find anything it + * returns one huge hole + * + * make sure what it found really fits our range, and + * adjust to make sure it is based on the start from + * the caller + */ + if (hole_em) { + u64 calc_end = extent_map_end(hole_em); + + if (calc_end <= start || (hole_em->start > end)) { + free_extent_map(hole_em); + hole_em = NULL; + } else { + hole_start = max(hole_em->start, start); + hole_len = calc_end - hole_start; + } + } + em->bdev = NULL; + if (hole_em && range_start > hole_start) { + /* our hole starts before our delalloc, so we + * have to return just the parts of the hole + * that go until the delalloc starts + */ + em->len = min(hole_len, + range_start - hole_start); + em->start = hole_start; + em->orig_start = hole_start; + /* + * don't adjust block start at all, + * it is fixed at EXTENT_MAP_HOLE + */ + em->block_start = hole_em->block_start; + em->block_len = hole_len; + } else { + em->start = range_start; + em->len = found; + em->orig_start = range_start; + em->block_start = EXTENT_MAP_DELALLOC; + em->block_len = found; + } + } else if (hole_em) { + return hole_em; + } +out: + + free_extent_map(hole_em); + if (err) { + free_extent_map(em); + return ERR_PTR(err); + } + return em; +} + static struct extent_map *btrfs_new_extent_direct(struct inode *inode, u64 start, u64 len) { @@ -6104,7 +6226,7 @@ out: static int btrfs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, __u64 start, __u64 len) { - return extent_fiemap(inode, fieinfo, start, len, btrfs_get_extent); + return extent_fiemap(inode, fieinfo, start, len, btrfs_get_extent_fiemap); } int btrfs_readpage(struct file *file, struct page *page) -- cgit v1.2.3-70-g09d2 From 9e924cf4078e377b84e2fd24ae11a61be7c6f5a3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 23 Feb 2011 07:05:07 +0000 Subject: net_sched: long word align struct qdisc_skb_cb data netem_skb_cb() does : return (struct netem_skb_cb *)qdisc_skb_cb(skb)->data; Unfortunatly struct qdisc_skb_cb data is not long word aligned, so access to psched_time_t time_to_send uses a non aligned access. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/sch_generic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index 160a407c196..04f8556313d 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -199,7 +199,7 @@ struct tcf_proto { struct qdisc_skb_cb { unsigned int pkt_len; - char data[]; + long data[]; }; static inline int qdisc_qlen(struct Qdisc *q) -- cgit v1.2.3-70-g09d2 From 8dde924217fdf5b69f6cbbdca099d077ba269ad0 Mon Sep 17 00:00:00 2001 From: Henry Nestler Date: Sun, 20 Feb 2011 11:44:58 +0000 Subject: DM9000B: Fix reg_save after spin_lock in dm9000_timeout The spin_lock should hold before reading register. Signed-off-by: David S. Miller --- drivers/net/dm9000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 2d4c4fc1d90..2bbd49653aa 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -852,8 +852,8 @@ static void dm9000_timeout(struct net_device *dev) unsigned long flags; /* Save previous register address */ - reg_save = readb(db->io_addr); spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); netif_stop_queue(dev); dm9000_reset(db); -- cgit v1.2.3-70-g09d2 From 108f518cc4f81eb8e3b46a0bd5cb902ef90a51a8 Mon Sep 17 00:00:00 2001 From: Henry Nestler Date: Tue, 22 Feb 2011 11:29:42 +0000 Subject: DM9000B: Fix PHY power for network down/up DM9000 revision B needs 1 ms delay after PHY power-on. PHY must be powered on by writing 0 into register DM9000_GPR before all other settings will change (see Davicom spec and example code). Remember, that register DM9000_GPR was not changed by reset sequence. Without this fix the FIFO is out of sync and sends wrong data after sequence of "ifconfig ethX down ; ifconfig ethX up". Signed-off-by: David S. Miller --- drivers/net/dm9000.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 2bbd49653aa..461dd6f905f 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -802,10 +802,7 @@ dm9000_init_dm9000(struct net_device *dev) /* Checksum mode */ dm9000_set_rx_csum_unlocked(dev, db->rx_csum); - /* GPIO0 on pre-activate PHY */ - iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ - iow(db, DM9000_GPR, 0); /* Enable PHY */ ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0; @@ -1194,6 +1191,10 @@ dm9000_open(struct net_device *dev) if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev)) return -EAGAIN; + /* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */ + iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ + mdelay(1); /* delay needs by DM9000B */ + /* Initialize DM9000 board */ dm9000_reset(db); dm9000_init_dm9000(dev); -- cgit v1.2.3-70-g09d2 From fac5b3caa1f5bc07ecfb4f5ce98f8112638dc8fb Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Tue, 22 Feb 2011 17:26:20 +0800 Subject: r8169: fix incorrect args to oob notify. It results in the wrong point address and influences RTL8168DP. Signed-off-by: Hayes Wang Acked-by: Francois Romieu --- drivers/net/r8169.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 469ab0b7ce3..550c8658964 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -617,8 +617,9 @@ static void ocp_write(struct rtl8169_private *tp, u8 mask, u16 reg, u32 data) } } -static void rtl8168_oob_notify(void __iomem *ioaddr, u8 cmd) +static void rtl8168_oob_notify(struct rtl8169_private *tp, u8 cmd) { + void __iomem *ioaddr = tp->mmio_addr; int i; RTL_W8(ERIDR, cmd); @@ -630,7 +631,7 @@ static void rtl8168_oob_notify(void __iomem *ioaddr, u8 cmd) break; } - ocp_write(ioaddr, 0x1, 0x30, 0x00000001); + ocp_write(tp, 0x1, 0x30, 0x00000001); } #define OOB_CMD_RESET 0x00 -- cgit v1.2.3-70-g09d2 From d24e9aafe5d5dfdf6d114b29e67f8afd5fae5ef0 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Tue, 22 Feb 2011 17:26:19 +0800 Subject: r8169: correct settings of rtl8102e. Adjust and remove certain settings of RTL8102E which are for previous chips. Signed-off-by: Hayes Wang Acked-off-by: Francois Romieu --- drivers/net/r8169.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 550c8658964..336ba9480e1 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3043,7 +3043,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_mwi_2; } - tp->cp_cmd = PCIMulRW | RxChkSum; + tp->cp_cmd = RxChkSum; if ((sizeof(dma_addr_t) > 4) && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) { @@ -3848,8 +3848,7 @@ static void rtl_hw_start_8168(struct net_device *dev) Cxpl_dbg_sel | \ ASF | \ PktCntrDisable | \ - PCIDAC | \ - PCIMulRW) + Mac_dbgo_sel) static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev) { @@ -3879,8 +3878,6 @@ static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev) if ((cfg1 & LEDS0) && (cfg1 & LEDS1)) RTL_W8(Config1, cfg1 & ~LEDS0); - RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK); - rtl_ephy_init(ioaddr, e_info_8102e_1, ARRAY_SIZE(e_info_8102e_1)); } @@ -3892,8 +3889,6 @@ static void rtl_hw_start_8102e_2(void __iomem *ioaddr, struct pci_dev *pdev) RTL_W8(Config1, MEMMAP | IOMAP | VPD | PMEnable); RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en); - - RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK); } static void rtl_hw_start_8102e_3(void __iomem *ioaddr, struct pci_dev *pdev) @@ -3919,6 +3914,8 @@ static void rtl_hw_start_8101(struct net_device *dev) } } + RTL_W8(Cfg9346, Cfg9346_Unlock); + switch (tp->mac_version) { case RTL_GIGA_MAC_VER_07: rtl_hw_start_8102e_1(ioaddr, pdev); @@ -3933,14 +3930,13 @@ static void rtl_hw_start_8101(struct net_device *dev) break; } - RTL_W8(Cfg9346, Cfg9346_Unlock); + RTL_W8(Cfg9346, Cfg9346_Lock); RTL_W8(MaxTxPacketSize, TxPacketMax); rtl_set_rx_max_size(ioaddr, rx_buf_sz); - tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW; - + tp->cp_cmd &= ~R810X_CPCMD_QUIRK_MASK; RTL_W16(CPlusCmd, tp->cp_cmd); RTL_W16(IntrMitigate, 0x0000); @@ -3950,14 +3946,10 @@ static void rtl_hw_start_8101(struct net_device *dev) RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); rtl_set_rx_tx_config_registers(tp); - RTL_W8(Cfg9346, Cfg9346_Lock); - RTL_R8(IntrMask); rtl_set_rx_mode(dev); - RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); - RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000); RTL_W16(IntrMask, tp->intr_event); -- cgit v1.2.3-70-g09d2 From 5d2e19572a66be1e349faba289b7bd049b85bc98 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Tue, 22 Feb 2011 17:26:22 +0800 Subject: r8169: fix RTL8168DP power off issue. - fix the RTL8111DP turn off the power when DASH is enabled. - RTL_GIGA_MAC_VER_27 must wait for tx finish before reset. Signed-off-by: Hayes Wang Acked-by: Francois Romieu --- drivers/net/r8169.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 336ba9480e1..ef2133b16f8 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2869,8 +2869,11 @@ static void r8168_pll_power_down(struct rtl8169_private *tp) { void __iomem *ioaddr = tp->mmio_addr; - if (tp->mac_version == RTL_GIGA_MAC_VER_27) + if (((tp->mac_version == RTL_GIGA_MAC_VER_27) || + (tp->mac_version == RTL_GIGA_MAC_VER_28)) && + (ocp_read(tp, 0x0f, 0x0010) & 0x00008000)) { return; + } if (((tp->mac_version == RTL_GIGA_MAC_VER_23) || (tp->mac_version == RTL_GIGA_MAC_VER_24)) && @@ -2892,6 +2895,8 @@ static void r8168_pll_power_down(struct rtl8169_private *tp) switch (tp->mac_version) { case RTL_GIGA_MAC_VER_25: case RTL_GIGA_MAC_VER_26: + case RTL_GIGA_MAC_VER_27: + case RTL_GIGA_MAC_VER_28: RTL_W8(PMCH, RTL_R8(PMCH) & ~0x80); break; } @@ -2901,12 +2906,17 @@ static void r8168_pll_power_up(struct rtl8169_private *tp) { void __iomem *ioaddr = tp->mmio_addr; - if (tp->mac_version == RTL_GIGA_MAC_VER_27) + if (((tp->mac_version == RTL_GIGA_MAC_VER_27) || + (tp->mac_version == RTL_GIGA_MAC_VER_28)) && + (ocp_read(tp, 0x0f, 0x0010) & 0x00008000)) { return; + } switch (tp->mac_version) { case RTL_GIGA_MAC_VER_25: case RTL_GIGA_MAC_VER_26: + case RTL_GIGA_MAC_VER_27: + case RTL_GIGA_MAC_VER_28: RTL_W8(PMCH, RTL_R8(PMCH) | 0x80); break; } @@ -3319,7 +3329,8 @@ static void rtl8169_hw_reset(struct rtl8169_private *tp) /* Disable interrupts */ rtl8169_irq_mask_and_ack(ioaddr); - if (tp->mac_version == RTL_GIGA_MAC_VER_28) { + if (tp->mac_version == RTL_GIGA_MAC_VER_27 || + tp->mac_version == RTL_GIGA_MAC_VER_28) { while (RTL_R8(TxPoll) & NPQ) udelay(20); -- cgit v1.2.3-70-g09d2 From 67158cebde60edb1a11cf4743f1cb9ded847c5fc Mon Sep 17 00:00:00 2001 From: Shahar Havivi Date: Tue, 22 Feb 2011 04:41:11 +0000 Subject: Added support for usb ethernet (0x0fe6, 0x9700) The device is very similar to (0x0fe6, 0x8101), And works well with dm9601 driver. Signed-off-by: Shahar Havivi Acked-by: Peter Korsgaard Signed-off-by: David S. Miller --- drivers/net/usb/dm9601.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 02b622e3b9f..5002f5be47b 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -650,6 +650,10 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0fe6, 0x8101), /* DM9601 USB to Fast Ethernet Adapter */ .driver_info = (unsigned long)&dm9601_info, }, + { + USB_DEVICE(0x0fe6, 0x9700), /* DM9601 USB to Fast Ethernet Adapter */ + .driver_info = (unsigned long)&dm9601_info, + }, { USB_DEVICE(0x0a46, 0x9000), /* DM9000E */ .driver_info = (unsigned long)&dm9601_info, -- cgit v1.2.3-70-g09d2 From c2e0eb167070a6e9dcb49c84c13c79a30d672431 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 22 Feb 2011 18:25:49 +0100 Subject: drm/i915: fix corruptions on i8xx due to relaxed fencing It looks like gen2 has a peculiar interleaved 2-row inter-tile layout. Probably inherited from i81x which had 2kb tiles (which naturally fit an even-number-of-tile-rows scheme to fit onto 4kb pages). There is no other mention of this in any docs (also not in the Intel internal documention according to Chris Wilson). Problem manifests itself in corruptions in the second half of the last tile row (if the bo has an odd number of tiles). Which can only happen with relaxed tiling (introduced in a00b10c360b35d6431a9). So reject set_tiling calls that don't satisfy this constrain to prevent broken userspace from causing havoc. While at it, also check the size for newer chipsets. LKML: https://lkml.org/lkml/2011/2/19/5 Reported-by: Indan Zupancic Tested-by: Indan Zupancic Signed-off-by: Daniel Vetter Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_gem_tiling.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 22a32b9932c..79a04fde69b 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -184,7 +184,7 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) static bool i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) { - int tile_width; + int tile_width, tile_height; /* Linear is always fine */ if (tiling_mode == I915_TILING_NONE) @@ -215,6 +215,20 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) } } + if (IS_GEN2(dev) || + (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))) + tile_height = 32; + else + tile_height = 8; + /* i8xx is strange: It has 2 interleaved rows of tiles, so needs an even + * number of tile rows. */ + if (IS_GEN2(dev)) + tile_height *= 2; + + /* Size needs to be aligned to a full tile row */ + if (size & (tile_height * stride - 1)) + return false; + /* 965+ just needs multiples of tile width */ if (INTEL_INFO(dev)->gen >= 4) { if (stride & (tile_width - 1)) -- cgit v1.2.3-70-g09d2 From 78794b2cdeac37ac1fd950fc9c4454b56d88ac03 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 23 Feb 2011 19:42:03 -0800 Subject: Revert "Bluetooth: Enable USB autosuspend by default on btusb" This reverts commit 556ea928f78a390fe16ae584e6433dff304d3014. Jeff Chua reports that it can cause some bluetooth devices (he mentions an Bluetooth Intermec scanner) to just stop responding after a while with messages like [ 4533.361959] btusb 8-1:1.0: no reset_resume for driver btusb? [ 4533.361964] btusb 8-1:1.1: no reset_resume for driver btusb? from the kernel. See also https://bugzilla.kernel.org/show_bug.cgi?id=26182 for other reports. Reported-by: Jeff Chua Reported-by: Andrew Meakovski Reported-by: Jim Faulkner Acked-by: Greg KH Acked-by: Matthew Garrett Acked-by: Gustavo F. Padovan Cc: stable@kernel.org (for 2.6.37) Signed-off-by: Linus Torvalds --- drivers/bluetooth/btusb.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index b7f2f373c63..700a3840fdd 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1044,8 +1044,6 @@ static int btusb_probe(struct usb_interface *intf, usb_set_intfdata(intf, data); - usb_enable_autosuspend(interface_to_usbdev(intf)); - return 0; } -- cgit v1.2.3-70-g09d2 From 2aa15890f3c191326678f1bd68af61ec6b8753ec Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 23 Feb 2011 13:49:47 +0100 Subject: mm: prevent concurrent unmap_mapping_range() on the same inode Michael Leun reported that running parallel opens on a fuse filesystem can trigger a "kernel BUG at mm/truncate.c:475" Gurudas Pai reported the same bug on NFS. The reason is, unmap_mapping_range() is not prepared for more than one concurrent invocation per inode. For example: thread1: going through a big range, stops in the middle of a vma and stores the restart address in vm_truncate_count. thread2: comes in with a small (e.g. single page) unmap request on the same vma, somewhere before restart_address, finds that the vma was already unmapped up to the restart address and happily returns without doing anything. Another scenario would be two big unmap requests, both having to restart the unmapping and each one setting vm_truncate_count to its own value. This could go on forever without any of them being able to finish. Truncate and hole punching already serialize with i_mutex. Other callers of unmap_mapping_range() do not, and it's difficult to get i_mutex protection for all callers. In particular ->d_revalidate(), which calls invalidate_inode_pages2_range() in fuse, may be called with or without i_mutex. This patch adds a new mutex to 'struct address_space' to prevent running multiple concurrent unmap_mapping_range() on the same mapping. [ We'll hopefully get rid of all this with the upcoming mm preemptibility series by Peter Zijlstra, the "mm: Remove i_mmap_mutex lockbreak" patch in particular. But that is for 2.6.39 ] Signed-off-by: Miklos Szeredi Reported-by: Michael Leun Reported-by: Gurudas Pai Tested-by: Gurudas Pai Acked-by: Hugh Dickins Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/gfs2/main.c | 9 +-------- fs/inode.c | 22 +++++++++++++++------- fs/nilfs2/btnode.c | 5 ----- fs/nilfs2/btnode.h | 1 - fs/nilfs2/mdt.c | 4 ++-- fs/nilfs2/page.c | 13 ------------- fs/nilfs2/page.h | 1 - fs/nilfs2/super.c | 2 +- include/linux/fs.h | 2 ++ mm/memory.c | 2 ++ 10 files changed, 23 insertions(+), 38 deletions(-) diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c index 85ba027d1c4..72c31a315d9 100644 --- a/fs/gfs2/main.c +++ b/fs/gfs2/main.c @@ -59,14 +59,7 @@ static void gfs2_init_gl_aspace_once(void *foo) struct address_space *mapping = (struct address_space *)(gl + 1); gfs2_init_glock_once(gl); - memset(mapping, 0, sizeof(*mapping)); - INIT_RADIX_TREE(&mapping->page_tree, GFP_ATOMIC); - spin_lock_init(&mapping->tree_lock); - spin_lock_init(&mapping->i_mmap_lock); - INIT_LIST_HEAD(&mapping->private_list); - spin_lock_init(&mapping->private_lock); - INIT_RAW_PRIO_TREE_ROOT(&mapping->i_mmap); - INIT_LIST_HEAD(&mapping->i_mmap_nonlinear); + address_space_init_once(mapping); } /** diff --git a/fs/inode.c b/fs/inode.c index da85e56378f..9c2b795ccc9 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -295,6 +295,20 @@ static void destroy_inode(struct inode *inode) call_rcu(&inode->i_rcu, i_callback); } +void address_space_init_once(struct address_space *mapping) +{ + memset(mapping, 0, sizeof(*mapping)); + INIT_RADIX_TREE(&mapping->page_tree, GFP_ATOMIC); + spin_lock_init(&mapping->tree_lock); + spin_lock_init(&mapping->i_mmap_lock); + INIT_LIST_HEAD(&mapping->private_list); + spin_lock_init(&mapping->private_lock); + INIT_RAW_PRIO_TREE_ROOT(&mapping->i_mmap); + INIT_LIST_HEAD(&mapping->i_mmap_nonlinear); + mutex_init(&mapping->unmap_mutex); +} +EXPORT_SYMBOL(address_space_init_once); + /* * These are initializations that only need to be done * once, because the fields are idempotent across use @@ -308,13 +322,7 @@ void inode_init_once(struct inode *inode) INIT_LIST_HEAD(&inode->i_devices); INIT_LIST_HEAD(&inode->i_wb_list); INIT_LIST_HEAD(&inode->i_lru); - INIT_RADIX_TREE(&inode->i_data.page_tree, GFP_ATOMIC); - spin_lock_init(&inode->i_data.tree_lock); - spin_lock_init(&inode->i_data.i_mmap_lock); - INIT_LIST_HEAD(&inode->i_data.private_list); - spin_lock_init(&inode->i_data.private_lock); - INIT_RAW_PRIO_TREE_ROOT(&inode->i_data.i_mmap); - INIT_LIST_HEAD(&inode->i_data.i_mmap_nonlinear); + address_space_init_once(&inode->i_data); i_size_ordered_init(inode); #ifdef CONFIG_FSNOTIFY INIT_HLIST_HEAD(&inode->i_fsnotify_marks); diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c index 388e9e8f528..85f7baa15f5 100644 --- a/fs/nilfs2/btnode.c +++ b/fs/nilfs2/btnode.c @@ -35,11 +35,6 @@ #include "btnode.h" -void nilfs_btnode_cache_init_once(struct address_space *btnc) -{ - nilfs_mapping_init_once(btnc); -} - static const struct address_space_operations def_btnode_aops = { .sync_page = block_sync_page, }; diff --git a/fs/nilfs2/btnode.h b/fs/nilfs2/btnode.h index 79037494f1e..1b8ebd888c2 100644 --- a/fs/nilfs2/btnode.h +++ b/fs/nilfs2/btnode.h @@ -37,7 +37,6 @@ struct nilfs_btnode_chkey_ctxt { struct buffer_head *newbh; }; -void nilfs_btnode_cache_init_once(struct address_space *); void nilfs_btnode_cache_init(struct address_space *, struct backing_dev_info *); void nilfs_btnode_cache_clear(struct address_space *); struct buffer_head *nilfs_btnode_create_block(struct address_space *btnc, diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c index 6a0e2a189f6..a0babd2bff6 100644 --- a/fs/nilfs2/mdt.c +++ b/fs/nilfs2/mdt.c @@ -454,9 +454,9 @@ int nilfs_mdt_setup_shadow_map(struct inode *inode, struct backing_dev_info *bdi = inode->i_sb->s_bdi; INIT_LIST_HEAD(&shadow->frozen_buffers); - nilfs_mapping_init_once(&shadow->frozen_data); + address_space_init_once(&shadow->frozen_data); nilfs_mapping_init(&shadow->frozen_data, bdi, &shadow_map_aops); - nilfs_mapping_init_once(&shadow->frozen_btnodes); + address_space_init_once(&shadow->frozen_btnodes); nilfs_mapping_init(&shadow->frozen_btnodes, bdi, &shadow_map_aops); mi->mi_shadow = shadow; return 0; diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c index 0c432416cfe..a585b35fd6b 100644 --- a/fs/nilfs2/page.c +++ b/fs/nilfs2/page.c @@ -492,19 +492,6 @@ unsigned nilfs_page_count_clean_buffers(struct page *page, return nc; } -void nilfs_mapping_init_once(struct address_space *mapping) -{ - memset(mapping, 0, sizeof(*mapping)); - INIT_RADIX_TREE(&mapping->page_tree, GFP_ATOMIC); - spin_lock_init(&mapping->tree_lock); - INIT_LIST_HEAD(&mapping->private_list); - spin_lock_init(&mapping->private_lock); - - spin_lock_init(&mapping->i_mmap_lock); - INIT_RAW_PRIO_TREE_ROOT(&mapping->i_mmap); - INIT_LIST_HEAD(&mapping->i_mmap_nonlinear); -} - void nilfs_mapping_init(struct address_space *mapping, struct backing_dev_info *bdi, const struct address_space_operations *aops) diff --git a/fs/nilfs2/page.h b/fs/nilfs2/page.h index 622df27cd89..2a00953ebd5 100644 --- a/fs/nilfs2/page.h +++ b/fs/nilfs2/page.h @@ -61,7 +61,6 @@ void nilfs_free_private_page(struct page *); int nilfs_copy_dirty_pages(struct address_space *, struct address_space *); void nilfs_copy_back_pages(struct address_space *, struct address_space *); void nilfs_clear_dirty_pages(struct address_space *); -void nilfs_mapping_init_once(struct address_space *mapping); void nilfs_mapping_init(struct address_space *mapping, struct backing_dev_info *bdi, const struct address_space_operations *aops); diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c index 58fd707174e..1673b3d9984 100644 --- a/fs/nilfs2/super.c +++ b/fs/nilfs2/super.c @@ -1279,7 +1279,7 @@ static void nilfs_inode_init_once(void *obj) #ifdef CONFIG_NILFS_XATTR init_rwsem(&ii->xattr_sem); #endif - nilfs_btnode_cache_init_once(&ii->i_btnode_cache); + address_space_init_once(&ii->i_btnode_cache); ii->i_bmap = &ii->i_bmap_data; inode_init_once(&ii->vfs_inode); } diff --git a/include/linux/fs.h b/include/linux/fs.h index bd3215940c3..97d08d8a7de 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -649,6 +649,7 @@ struct address_space { spinlock_t private_lock; /* for use by the address_space */ struct list_head private_list; /* ditto */ struct address_space *assoc_mapping; /* ditto */ + struct mutex unmap_mutex; /* to protect unmapping */ } __attribute__((aligned(sizeof(long)))); /* * On most architectures that alignment is already the case; but @@ -2225,6 +2226,7 @@ extern loff_t vfs_llseek(struct file *file, loff_t offset, int origin); extern int inode_init_always(struct super_block *, struct inode *); extern void inode_init_once(struct inode *); +extern void address_space_init_once(struct address_space *mapping); extern void ihold(struct inode * inode); extern void iput(struct inode *); extern struct inode * igrab(struct inode *); diff --git a/mm/memory.c b/mm/memory.c index 8e8c1832486..5823698c2b7 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2648,6 +2648,7 @@ void unmap_mapping_range(struct address_space *mapping, details.last_index = ULONG_MAX; details.i_mmap_lock = &mapping->i_mmap_lock; + mutex_lock(&mapping->unmap_mutex); spin_lock(&mapping->i_mmap_lock); /* Protect against endless unmapping loops */ @@ -2664,6 +2665,7 @@ void unmap_mapping_range(struct address_space *mapping, if (unlikely(!list_empty(&mapping->i_mmap_nonlinear))) unmap_mapping_range_list(&mapping->i_mmap_nonlinear, &details); spin_unlock(&mapping->i_mmap_lock); + mutex_unlock(&mapping->unmap_mutex); } EXPORT_SYMBOL(unmap_mapping_range); -- cgit v1.2.3-70-g09d2 From a3e8cc643d22d2c8ed36b9be7d9c9ca21efcf7f7 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 23 Feb 2011 21:39:49 -0800 Subject: mm: fix possible cause of a page_mapped BUG Robert Swiecki reported a BUG_ON(page_mapped) from a fuzzer, punching a hole with madvise(,, MADV_REMOVE). That path is under mutex, and cannot be explained by lack of serialization in unmap_mapping_range(). Reviewing the code, I found one place where vm_truncate_count handling should have been updated, when I switched at the last minute from one way of managing the restart_addr to another: mremap move changes the virtual addresses, so it ought to adjust the restart_addr. But rather than exporting the notion of restart_addr from memory.c, or converting to restart_pgoff throughout, simply reset vm_truncate_count to 0 to force a rescan if mremap move races with preempted truncation. We have no confirmation that this fixes Robert's BUG, but it is a fix that's worth making anyway. Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds --- mm/mremap.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/mm/mremap.c b/mm/mremap.c index 9925b6391b8..1de98d492dd 100644 --- a/mm/mremap.c +++ b/mm/mremap.c @@ -94,9 +94,7 @@ static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd, */ mapping = vma->vm_file->f_mapping; spin_lock(&mapping->i_mmap_lock); - if (new_vma->vm_truncate_count && - new_vma->vm_truncate_count != vma->vm_truncate_count) - new_vma->vm_truncate_count = 0; + new_vma->vm_truncate_count = 0; } /* -- cgit v1.2.3-70-g09d2 From 93b270f76e7ef3b81001576860c2701931cdc78b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 24 Feb 2011 17:25:47 +1100 Subject: Fix over-zealous flush_disk when changing device size. There are two cases when we call flush_disk. In one, the device has disappeared (check_disk_change) so any data will hold becomes irrelevant. In the oter, the device has changed size (check_disk_size_change) so data we hold may be irrelevant. In both cases it makes sense to discard any 'clean' buffers, so they will be read back from the device if needed. In the former case it makes sense to discard 'dirty' buffers as there will never be anywhere safe to write the data. In the second case it *does*not* make sense to discard dirty buffers as that will lead to file system corruption when you simply enlarge the containing devices. flush_disk calls __invalidate_devices. __invalidate_device calls both invalidate_inodes and invalidate_bdev. invalidate_inodes *does* discard I_DIRTY inodes and this does lead to fs corruption. invalidate_bev *does*not* discard dirty pages, but I don't really care about that at present. So this patch adds a flag to __invalidate_device (calling it __invalidate_device2) to indicate whether dirty buffers should be killed, and this is passed to invalidate_inodes which can choose to skip dirty inodes. flusk_disk then passes true from check_disk_change and false from check_disk_size_change. dm avoids tripping over this problem by calling i_size_write directly rathher than using check_disk_size_change. md does use check_disk_size_change and so is affected. This regression was introduced by commit 608aeef17a which causes check_disk_size_change to call flush_disk, so it is suitable for any kernel since 2.6.27. Cc: stable@kernel.org Acked-by: Jeff Moyer Cc: Andrew Patterson Cc: Jens Axboe Signed-off-by: NeilBrown --- block/genhd.c | 2 +- drivers/block/floppy.c | 2 +- fs/block_dev.c | 12 ++++++------ fs/inode.c | 9 ++++++++- fs/internal.h | 2 +- include/linux/fs.h | 2 +- 6 files changed, 18 insertions(+), 11 deletions(-) diff --git a/block/genhd.c b/block/genhd.c index 6a5b772aa20..cbf1112a885 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1355,7 +1355,7 @@ int invalidate_partition(struct gendisk *disk, int partno) struct block_device *bdev = bdget_disk(disk, partno); if (bdev) { fsync_bdev(bdev); - res = __invalidate_device(bdev); + res = __invalidate_device(bdev, true); bdput(bdev); } return res; diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index b9ba04fc2b3..77fc76f8aea 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3281,7 +3281,7 @@ static int set_geometry(unsigned int cmd, struct floppy_struct *g, struct block_device *bdev = opened_bdev[cnt]; if (!bdev || ITYPE(drive_state[cnt].fd_device) != type) continue; - __invalidate_device(bdev); + __invalidate_device(bdev, true); } mutex_unlock(&open_lock); } else { diff --git a/fs/block_dev.c b/fs/block_dev.c index 333a7bb4cb9..5e23152d04a 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -927,9 +927,9 @@ EXPORT_SYMBOL_GPL(bd_unlink_disk_holder); * when a disk has been changed -- either by a media change or online * resize. */ -static void flush_disk(struct block_device *bdev) +static void flush_disk(struct block_device *bdev, bool kill_dirty) { - if (__invalidate_device(bdev)) { + if (__invalidate_device(bdev, kill_dirty)) { char name[BDEVNAME_SIZE] = ""; if (bdev->bd_disk) @@ -966,7 +966,7 @@ void check_disk_size_change(struct gendisk *disk, struct block_device *bdev) "%s: detected capacity change from %lld to %lld\n", name, bdev_size, disk_size); i_size_write(bdev->bd_inode, disk_size); - flush_disk(bdev); + flush_disk(bdev, false); } } EXPORT_SYMBOL(check_disk_size_change); @@ -1019,7 +1019,7 @@ int check_disk_change(struct block_device *bdev) if (!(events & DISK_EVENT_MEDIA_CHANGE)) return 0; - flush_disk(bdev); + flush_disk(bdev, true); if (bdops->revalidate_disk) bdops->revalidate_disk(bdev->bd_disk); return 1; @@ -1601,7 +1601,7 @@ fail: } EXPORT_SYMBOL(lookup_bdev); -int __invalidate_device(struct block_device *bdev) +int __invalidate_device(struct block_device *bdev, bool kill_dirty) { struct super_block *sb = get_super(bdev); int res = 0; @@ -1614,7 +1614,7 @@ int __invalidate_device(struct block_device *bdev) * hold). */ shrink_dcache_sb(sb); - res = invalidate_inodes(sb); + res = invalidate_inodes(sb, kill_dirty); drop_super(sb); } invalidate_bdev(bdev); diff --git a/fs/inode.c b/fs/inode.c index da85e56378f..c50d7feb87b 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -540,11 +540,14 @@ void evict_inodes(struct super_block *sb) /** * invalidate_inodes - attempt to free all inodes on a superblock * @sb: superblock to operate on + * @kill_dirty: flag to guide handling of dirty inodes * * Attempts to free all inodes for a given superblock. If there were any * busy inodes return a non-zero value, else zero. + * If @kill_dirty is set, discard dirty inodes too, otherwise treat + * them as busy. */ -int invalidate_inodes(struct super_block *sb) +int invalidate_inodes(struct super_block *sb, bool kill_dirty) { int busy = 0; struct inode *inode, *next; @@ -556,6 +559,10 @@ int invalidate_inodes(struct super_block *sb) list_for_each_entry_safe(inode, next, &sb->s_inodes, i_sb_list) { if (inode->i_state & (I_NEW | I_FREEING | I_WILL_FREE)) continue; + if (inode->i_state & I_DIRTY && !kill_dirty) { + busy = 1; + continue; + } if (atomic_read(&inode->i_count)) { busy = 1; continue; diff --git a/fs/internal.h b/fs/internal.h index 0663568b124..9b976b57d7f 100644 --- a/fs/internal.h +++ b/fs/internal.h @@ -112,4 +112,4 @@ extern void release_open_intent(struct nameidata *); */ extern int get_nr_dirty_inodes(void); extern void evict_inodes(struct super_block *); -extern int invalidate_inodes(struct super_block *); +extern int invalidate_inodes(struct super_block *, bool); diff --git a/include/linux/fs.h b/include/linux/fs.h index 32b38cd829d..683f4c566c8 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2139,7 +2139,7 @@ extern void check_disk_size_change(struct gendisk *disk, struct block_device *bdev); extern int revalidate_disk(struct gendisk *); extern int check_disk_change(struct block_device *); -extern int __invalidate_device(struct block_device *); +extern int __invalidate_device(struct block_device *, bool); extern int invalidate_partition(struct gendisk *, int); #endif unsigned long invalidate_mapping_pages(struct address_space *mapping, -- cgit v1.2.3-70-g09d2 From f0b4f7e2f29af678bd9af43422c537dcb6008603 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 24 Feb 2011 17:26:41 +1100 Subject: md: Fix - again - partition detection when array becomes active Revert b821eaa572fd737faaf6928ba046e571526c36c6 and f3b99be19ded511a1bf05a148276239d9f13eefa When I wrote the first of these I had a wrong idea about the lifetime of 'struct block_device'. It can disappear at any time that the block device is not open if it falls out of the inode cache. So relying on the 'size' recorded with it to detect when the device size has changed and so we need to revalidate, is wrong. Rather, we really do need the 'changed' attribute stored directly in the mddev and set/tested as appropriate. Without this patch, a sequence of: mknod / open / close / unlink (which can cause a block_device to be created and then destroyed) will result in a rescan of the partition table and consequence removal and addition of partitions. Several of these in a row can get udev racing to create and unlink and other code can get confused. With the patch, the rescan is only performed when needed and so there are no races. This is suitable for any stable kernel from 2.6.35. Reported-by: "Wojcik, Krzysztof" Signed-off-by: NeilBrown Cc: stable@kernel.org --- drivers/md/md.c | 22 +++++++++++++++++++++- drivers/md/md.h | 2 ++ 2 files changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 330addfe9b7..818313e277e 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4627,6 +4627,7 @@ static int do_md_run(mddev_t *mddev) } set_capacity(mddev->gendisk, mddev->array_sectors); revalidate_disk(mddev->gendisk); + mddev->changed = 1; kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE); out: return err; @@ -4715,6 +4716,7 @@ static void md_clean(mddev_t *mddev) mddev->sync_speed_min = mddev->sync_speed_max = 0; mddev->recovery = 0; mddev->in_sync = 0; + mddev->changed = 0; mddev->degraded = 0; mddev->safemode = 0; mddev->bitmap_info.offset = 0; @@ -4830,6 +4832,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) set_capacity(disk, 0); mutex_unlock(&mddev->open_mutex); + mddev->changed = 1; revalidate_disk(disk); if (mddev->ro) @@ -6014,7 +6017,7 @@ static int md_open(struct block_device *bdev, fmode_t mode) atomic_inc(&mddev->openers); mutex_unlock(&mddev->open_mutex); - check_disk_size_change(mddev->gendisk, bdev); + check_disk_change(bdev); out: return err; } @@ -6029,6 +6032,21 @@ static int md_release(struct gendisk *disk, fmode_t mode) return 0; } + +static int md_media_changed(struct gendisk *disk) +{ + mddev_t *mddev = disk->private_data; + + return mddev->changed; +} + +static int md_revalidate(struct gendisk *disk) +{ + mddev_t *mddev = disk->private_data; + + mddev->changed = 0; + return 0; +} static const struct block_device_operations md_fops = { .owner = THIS_MODULE, @@ -6039,6 +6057,8 @@ static const struct block_device_operations md_fops = .compat_ioctl = md_compat_ioctl, #endif .getgeo = md_getgeo, + .media_changed = md_media_changed, + .revalidate_disk= md_revalidate, }; static int md_thread(void * arg) diff --git a/drivers/md/md.h b/drivers/md/md.h index 7e90b8593b2..12215d437fc 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -274,6 +274,8 @@ struct mddev_s atomic_t active; /* general refcount */ atomic_t openers; /* number of active opens */ + int changed; /* True if we might need to + * reread partition info */ int degraded; /* whether md should consider * adding a spare */ -- cgit v1.2.3-70-g09d2 From bf9faa2aa30e2ebf30287536712ed2717bb47002 Mon Sep 17 00:00:00 2001 From: "J. R. Okajima" Date: Wed, 23 Feb 2011 16:59:49 +0900 Subject: Unlock vfsmount_lock in do_umount By the commit b3e19d9 2011-01-07 fs: scale mntget/mntput vfsmount_lock was introduced around testing mnt_count. Fix the mis-typed 'unlock' Signed-off-by: J. R. Okajima Acked-by: Al Viro Signed-off-by: Al Viro --- fs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namespace.c b/fs/namespace.c index 7b0b9537169..d1edf26025d 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1244,7 +1244,7 @@ static int do_umount(struct vfsmount *mnt, int flags) */ br_write_lock(vfsmount_lock); if (mnt_get_count(mnt) != 2) { - br_write_lock(vfsmount_lock); + br_write_unlock(vfsmount_lock); return -EBUSY; } br_write_unlock(vfsmount_lock); -- cgit v1.2.3-70-g09d2 From 7b62dbec908a29f448047099bedb5c64c9cb8808 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Wed, 23 Feb 2011 16:07:26 -0800 Subject: x86/mrst: Fix apb timer rating when lapic timer is used Need to adjust the clockevent device rating for the structure that will be registered with clockevent system instead of the temporary structure. Without this fix, APB timer rating will be higher than LAPIC timer such that it can not be released later to be used as the broadcast timer. Signed-off-by: Jacob Pan Cc: Arjan van de Ven Cc: Alan Cox Cc: Thomas Gleixner Cc: John Stultz LKML-Reference: <1298506046-439-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apb_timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index 51ef31a89be..51d4e166306 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -284,7 +284,7 @@ static int __init apbt_clockevent_register(void) memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device)); if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) { - apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100; + adev->evt.rating = APBT_CLOCKEVENT_RATING - 100; global_clock_event = &adev->evt; printk(KERN_DEBUG "%s clockevent registered as global\n", global_clock_event->name); -- cgit v1.2.3-70-g09d2 From 3c522cedb572bb8d2e4867f358bdaa7d0c53d88c Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 24 Feb 2011 15:45:41 +0100 Subject: block: fix refcounting in BLKBSZSET Adam Kovari and others reported that disconnecting an USB drive with an ntfs-3g filesystem would cause "kernel BUG at fs/inode.c:1421!" to be triggered. The BUG could be traced back to ioctl(BLKBSZSET), which would erroneously decrement the refcount on the bdev. This is because blkdev_get() expects the refcount to be already incremented and either returns success or decrements the refcount and returns an error. The bug was introduced by e525fd89 (block: make blkdev_get/put() handle exclusive access), which didn't take into account this behavior of blkdev_get(). This fixes https://bugzilla.kernel.org/show_bug.cgi?id=29202 (and likely 29792 too) Reported-by: Adam Kovari Acked-by: Tejun Heo Signed-off-by: Miklos Szeredi Signed-off-by: Linus Torvalds --- block/ioctl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/block/ioctl.c b/block/ioctl.c index 9049d460fa8..1124cd29726 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -294,9 +294,11 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, return -EINVAL; if (get_user(n, (int __user *) arg)) return -EFAULT; - if (!(mode & FMODE_EXCL) && - blkdev_get(bdev, mode | FMODE_EXCL, &bdev) < 0) - return -EBUSY; + if (!(mode & FMODE_EXCL)) { + bdgrab(bdev); + if (blkdev_get(bdev, mode | FMODE_EXCL, &bdev) < 0) + return -EBUSY; + } ret = set_blocksize(bdev, n); if (!(mode & FMODE_EXCL)) blkdev_put(bdev, mode | FMODE_EXCL); -- cgit v1.2.3-70-g09d2 From 8074b26f67165bf045d92e778c9c10dc5e207fc6 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 24 Feb 2011 15:49:53 +0100 Subject: mm: fix refcounting in swapon Grab a reference to bdev before calling blkdev_get(), which expects the refcount to be already incremented and either returns success or decrements the refcount and returns an error. The bug was introduced by e525fd89 (block: make blkdev_get/put() handle exclusive access), which didn't take into account this behavior of blkdev_get(). Acked-by: Tejun Heo Signed-off-by: Miklos Szeredi Signed-off-by: Linus Torvalds --- mm/swapfile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/swapfile.c b/mm/swapfile.c index 07a458d72fa..0341c5700e3 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -1940,7 +1940,7 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags) error = -EINVAL; if (S_ISBLK(inode->i_mode)) { - bdev = I_BDEV(inode); + bdev = bdgrab(I_BDEV(inode)); error = blkdev_get(bdev, FMODE_READ | FMODE_WRITE | FMODE_EXCL, sys_swapon); if (error < 0) { -- cgit v1.2.3-70-g09d2 From e7407d1619713f4b1fdff3a485e1bd8e77bd480d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 24 Feb 2011 09:56:32 +0100 Subject: block: bd_link_disk_holder() should hold on to holder_dir The new implementation of bd_link_disk_holder() added by 49731baa41d (block: restore multiple bd_link_disk_holder() support) didn't get an extra reference for the holder_dir kobject of the slave bdev; however, bdev kills holder_dir on removal, not release, so if the slave bdev is removed while there are holder links, the holder_dir will be destroyed while there still are holder links, which leads to oops later when bd_unlink_disk_order() tries to remove those links. Make bd_link_disk_holder() grab an extra reference for the slave's holder_dir and put it in bd_unlink_disk_holder(). Signed-off-by: Tejun Heo Reported-by: "Hawrylewicz Czarnowski, Przemyslaw" Tested-by: "Hawrylewicz Czarnowski, Przemyslaw" Cc: Neil Brown Cc: Jens Axboe Signed-off-by: Linus Torvalds --- fs/block_dev.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/block_dev.c b/fs/block_dev.c index 4fb8a343153..94d41db6200 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -873,6 +873,11 @@ int bd_link_disk_holder(struct block_device *bdev, struct gendisk *disk) ret = add_symlink(bdev->bd_part->holder_dir, &disk_to_dev(disk)->kobj); if (ret) goto out_del; + /* + * bdev could be deleted beneath us which would implicitly destroy + * the holder directory. Hold on to it. + */ + kobject_get(bdev->bd_part->holder_dir); list_add(&holder->list, &bdev->bd_holder_disks); goto out_unlock; @@ -909,6 +914,7 @@ void bd_unlink_disk_holder(struct block_device *bdev, struct gendisk *disk) del_symlink(disk->slave_dir, &part_to_dev(bdev->bd_part)->kobj); del_symlink(bdev->bd_part->holder_dir, &disk_to_dev(disk)->kobj); + kobject_put(bdev->bd_part->holder_dir); list_del_init(&holder->list); kfree(holder); } -- cgit v1.2.3-70-g09d2 From 4dfb8a45d533808e78d67ef27e0a47d456c12a92 Mon Sep 17 00:00:00 2001 From: Vitaliy Kulikov Date: Tue, 22 Feb 2011 17:32:19 -0600 Subject: ALSA: hda - Add support for new IDT 92HD98 and 92HD99 codecs Also fix number of 92HD87 pins to exclude invalid pins. Signed-off-by: Vitaliy Kulikov Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 9ea48b425d0..bd7b123f644 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -586,7 +586,12 @@ static hda_nid_t stac92hd83xxx_pin_nids[10] = { 0x0f, 0x10, 0x11, 0x1f, 0x20, }; -static hda_nid_t stac92hd88xxx_pin_nids[10] = { +static hda_nid_t stac92hd87xxx_pin_nids[6] = { + 0x0a, 0x0b, 0x0c, 0x0d, + 0x0f, 0x11, +}; + +static hda_nid_t stac92hd88xxx_pin_nids[8] = { 0x0a, 0x0b, 0x0c, 0x0d, 0x0f, 0x11, 0x1f, 0x20, }; @@ -5430,12 +5435,13 @@ again: switch (codec->vendor_id) { case 0x111d76d1: case 0x111d76d9: + case 0x111d76e5: spec->dmic_nids = stac92hd87b_dmic_nids; spec->num_dmics = stac92xx_connected_ports(codec, stac92hd87b_dmic_nids, STAC92HD87B_NUM_DMICS); - spec->num_pins = ARRAY_SIZE(stac92hd88xxx_pin_nids); - spec->pin_nids = stac92hd88xxx_pin_nids; + spec->num_pins = ARRAY_SIZE(stac92hd87xxx_pin_nids); + spec->pin_nids = stac92hd87xxx_pin_nids; spec->mono_nid = 0; spec->num_pwrs = 0; break; @@ -5443,6 +5449,7 @@ again: case 0x111d7667: case 0x111d7668: case 0x111d7669: + case 0x111d76e3: spec->num_dmics = stac92xx_connected_ports(codec, stac92hd88xxx_dmic_nids, STAC92HD88XXX_NUM_DMICS); @@ -6387,6 +6394,8 @@ static struct hda_codec_preset snd_hda_preset_sigmatel[] = { { .id = 0x111d76cd, .name = "92HD89F2", .patch = patch_stac92hd73xx }, { .id = 0x111d76ce, .name = "92HD89F1", .patch = patch_stac92hd73xx }, { .id = 0x111d76e0, .name = "92HD91BXX", .patch = patch_stac92hd83xxx}, + { .id = 0x111d76e3, .name = "92HD98BXX", .patch = patch_stac92hd83xxx}, + { .id = 0x111d76e5, .name = "92HD99BXX", .patch = patch_stac92hd83xxx}, { .id = 0x111d76e7, .name = "92HD90BXX", .patch = patch_stac92hd83xxx}, {} /* terminator */ }; -- cgit v1.2.3-70-g09d2 From 995073072c2ae72255b595b192cc63f43fd386ef Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 24 Feb 2011 09:42:52 +0000 Subject: drm/i915: Fix unintended recursion in ironlake_disable_rc6 After disabling, we're meant to teardown the bo used for the contexts, not recurse into ourselves again and preventing module unload. Reported-and-tested-by: Ben Widawsky Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9ca1bb2554f..e79b25bbee6 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6575,7 +6575,7 @@ static void ironlake_disable_rc6(struct drm_device *dev) POSTING_READ(RSTDBYCTL); } - ironlake_disable_rc6(dev); + ironlake_teardown_rc6(dev); } static int ironlake_setup_rc6(struct drm_device *dev) -- cgit v1.2.3-70-g09d2 From 805bdaec1a44155db35f6ee5410d6bbc365324a8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 24 Feb 2011 11:10:01 +0100 Subject: PM: Make ACPI wakeup from S5 work again when CONFIG_PM_SLEEP is unset Commit 074037e (PM / Wakeup: Introduce wakeup source objects and event statistics (v3)) caused ACPI wakeup to only work if CONFIG_PM_SLEEP is set, but it also worked for CONFIG_PM_SLEEP unset before. This can be fixed by making device_set_wakeup_enable(), device_init_wakeup() and device_may_wakeup() work in the same way as before commit 074037e when CONFIG_PM_SLEEP is unset. Reported-and-tested-by: Justin Maggard Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki --- include/linux/pm.h | 2 ++ include/linux/pm_wakeup.h | 25 ++++++++++++++----------- 2 files changed, 16 insertions(+), 11 deletions(-) diff --git a/include/linux/pm.h b/include/linux/pm.h index dd9c7ab3827..21415cc91cb 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -431,6 +431,8 @@ struct dev_pm_info { struct list_head entry; struct completion completion; struct wakeup_source *wakeup; +#else + unsigned int should_wakeup:1; #endif #ifdef CONFIG_PM_RUNTIME struct timer_list suspend_timer; diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h index 9cff00dd6b6..03a67db03d0 100644 --- a/include/linux/pm_wakeup.h +++ b/include/linux/pm_wakeup.h @@ -109,11 +109,6 @@ static inline bool device_can_wakeup(struct device *dev) return dev->power.can_wakeup; } -static inline bool device_may_wakeup(struct device *dev) -{ - return false; -} - static inline struct wakeup_source *wakeup_source_create(const char *name) { return NULL; @@ -134,24 +129,32 @@ static inline void wakeup_source_unregister(struct wakeup_source *ws) {} static inline int device_wakeup_enable(struct device *dev) { - return -EINVAL; + dev->power.should_wakeup = true; + return 0; } static inline int device_wakeup_disable(struct device *dev) { + dev->power.should_wakeup = false; return 0; } -static inline int device_init_wakeup(struct device *dev, bool val) +static inline int device_set_wakeup_enable(struct device *dev, bool enable) { - dev->power.can_wakeup = val; - return val ? -EINVAL : 0; + dev->power.should_wakeup = enable; + return 0; } +static inline int device_init_wakeup(struct device *dev, bool val) +{ + device_set_wakeup_capable(dev, val); + device_set_wakeup_enable(dev, val); + return 0; +} -static inline int device_set_wakeup_enable(struct device *dev, bool enable) +static inline bool device_may_wakeup(struct device *dev) { - return -EINVAL; + return dev->power.can_wakeup && dev->power.should_wakeup; } static inline void __pm_stay_awake(struct wakeup_source *ws) {} -- cgit v1.2.3-70-g09d2 From ec95d35a6bd0047f05fe8a21e6c52f8bb418da55 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 24 Feb 2011 10:36:53 +0200 Subject: usb: musb: core: set has_tt flag MUSB is a non-standard host implementation which can handle all speeds with the same core. We need to set has_tt flag after commit d199c96d41d80a567493e12b8e96ea056a1350c1 (USB: prevent buggy hubs from crashing the USB stack) in order for MUSB HCD to continue working. Signed-off-by: Felipe Balbi Cc: stable Cc: Alan Stern Tested-by: Michael Jones Tested-by: Alexander Holler Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 54a8bd1047d..c292d5c499e 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1864,6 +1864,7 @@ allocate_instance(struct device *dev, INIT_LIST_HEAD(&musb->out_bulk); hcd->uses_new_polling = 1; + hcd->has_tt = 1; musb->vbuserr_retry = VBUSERR_RETRY_COUNT; musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON; -- cgit v1.2.3-70-g09d2 From 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Thu, 24 Feb 2011 15:53:46 +0100 Subject: x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems On some SB800 systems polarity for IOAPIC pin2 is wrongly specified as low active by BIOS. This caused system hangs after resume from S3 when HPET was used in one-shot mode on such systems because a timer interrupt was missed (HPET signal is high active). For more details see: http://marc.info/?l=linux-kernel&m=129623757413868 Tested-by: Manoj Iyer Tested-by: Andre Przywara Signed-off-by: Andreas Herrmann Cc: Borislav Petkov Cc: stable@kernel.org # 37.x, 32.x LKML-Reference: <20110224145346.GD3658@alberich.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/acpi.h | 1 + arch/x86/kernel/acpi/boot.c | 14 ++++++++++---- arch/x86/kernel/early-quirks.c | 16 +++++++--------- 3 files changed, 18 insertions(+), 13 deletions(-) diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 211ca3f7fd1..4ea15ca89b2 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -88,6 +88,7 @@ extern int acpi_disabled; extern int acpi_pci_disabled; extern int acpi_skip_timer_override; extern int acpi_use_timer_override; +extern int acpi_fix_pin2_polarity; extern u8 acpi_sci_flags; extern int acpi_sci_override_gsi; diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index b3a71137983..3e6e2d68f76 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -72,6 +72,7 @@ u8 acpi_sci_flags __initdata; int acpi_sci_override_gsi __initdata; int acpi_skip_timer_override __initdata; int acpi_use_timer_override __initdata; +int acpi_fix_pin2_polarity __initdata; #ifdef CONFIG_X86_LOCAL_APIC static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; @@ -415,10 +416,15 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header, return 0; } - if (acpi_skip_timer_override && - intsrc->source_irq == 0 && intsrc->global_irq == 2) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); - return 0; + if (intsrc->source_irq == 0 && intsrc->global_irq == 2) { + if (acpi_skip_timer_override) { + printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + return 0; + } + if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { + intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK; + printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n"); + } } mp_override_legacy_irq(intsrc->source_irq, diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 76b8cd953de..9efbdcc5642 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -143,15 +143,10 @@ static void __init ati_bugs(int num, int slot, int func) static u32 __init ati_sbx00_rev(int num, int slot, int func) { - u32 old, d; + u32 d; - d = read_pci_config(num, slot, func, 0x70); - old = d; - d &= ~(1<<8); - write_pci_config(num, slot, func, 0x70, d); d = read_pci_config(num, slot, func, 0x8); d &= 0xff; - write_pci_config(num, slot, func, 0x70, old); return d; } @@ -160,13 +155,16 @@ static void __init ati_bugs_contd(int num, int slot, int func) { u32 d, rev; - if (acpi_use_timer_override) - return; - rev = ati_sbx00_rev(num, slot, func); + if (rev >= 0x40) + acpi_fix_pin2_polarity = 1; + if (rev > 0x13) return; + if (acpi_use_timer_override) + return; + /* check for IRQ0 interrupt swap */ d = read_pci_config(num, slot, func, 0x64); if (!(d & (1<<14))) -- cgit v1.2.3-70-g09d2 From 9f0939bf498273b91f79a8ec2f2aa773f8615bb8 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Thu, 24 Feb 2011 15:18:07 -0300 Subject: MAINTAINERS: Update email address Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 6f99e1260db..98710933ac1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5266,7 +5266,7 @@ S: Maintained F: drivers/net/wireless/rtl818x/rtl8180/ RTL8187 WIRELESS DRIVER -M: Herton Ronaldo Krzesinski +M: Herton Ronaldo Krzesinski M: Hin-Tak Leung M: Larry Finger L: linux-wireless@vger.kernel.org @@ -6104,7 +6104,7 @@ S: Maintained F: security/tomoyo/ TOPSTAR LAPTOP EXTRAS DRIVER -M: Herton Ronaldo Krzesinski +M: Herton Ronaldo Krzesinski L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/topstar-laptop.c -- cgit v1.2.3-70-g09d2 From cbc9438075ca9dee3f39a2e7310f81c304b40359 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 22 Feb 2011 19:59:49 -0700 Subject: OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER OMAP2+ kernels built without CONFIG_OMAP_32K_TIMER crash on boot after the 2.6.38 sched_clock changes: [ 0.000000] OMAP clockevent source: GPTIMER1 at 13000000 Hz [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 0.000000] pgd = c0004000 [ 0.000000] [00000000] *pgd=00000000 [ 0.000000] Internal error: Oops: 80000005 [#1] SMP [ 0.000000] last sysfs file: [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (2.6.38-rc5-00057-g04aa67d #152) [ 0.000000] PC is at 0x0 [ 0.000000] LR is at sched_clock_poll+0x2c/0x3c Without CONFIG_OMAP_32K_TIMER, the kernel has an clockevent and clocksource resolution about three orders of magnitude higher than with CONFIG_OMAP_32K_TIMER set. The tradeoff is that the lowest power consumption states are not available. Fix by calling init_sched_clock() from the GPTIMER clocksource init code. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer-gp.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 7b7c2683ae7..0fc550e7e48 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -39,6 +39,7 @@ #include #include #include +#include #include "timer-gp.h" @@ -190,6 +191,7 @@ static void __init omap2_gp_clocksource_init(void) /* * clocksource */ +static DEFINE_CLOCK_DATA(cd); static struct omap_dm_timer *gpt_clocksource; static cycle_t clocksource_read_cycles(struct clocksource *cs) { @@ -204,6 +206,15 @@ static struct clocksource clocksource_gpt = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static void notrace dmtimer_update_sched_clock(void) +{ + u32 cyc; + + cyc = omap_dm_timer_read_counter(gpt_clocksource); + + update_sched_clock(&cd, cyc, (u32)~0); +} + /* Setup free-running counter for clocksource */ static void __init omap2_gp_clocksource_init(void) { @@ -224,6 +235,8 @@ static void __init omap2_gp_clocksource_init(void) omap_dm_timer_set_load_start(gpt, 1, 0); + init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate); + if (clocksource_register_hz(&clocksource_gpt, tick_rate)) printk(err2, clocksource_gpt.name); } -- cgit v1.2.3-70-g09d2 From 9ee291a453c1db310c0298f8e6c28794cd2c52bd Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 2 Feb 2011 20:17:22 +0000 Subject: regulator: Fix warning with CONFIG_BUG disabled Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/wm831x-dcdc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 8b0d2c4bde9..06df898842c 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -120,6 +120,7 @@ static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev) return REGULATOR_MODE_IDLE; default: BUG(); + return -EINVAL; } } -- cgit v1.2.3-70-g09d2 From 4b2f67d756cf4a5ed8e8d11caa7dcea06c41a09e Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 23 Feb 2011 23:45:55 +0100 Subject: regulator, mc13xxx: Remove pointless test for unsigned less than zero The variable 'val' is a 'unsigned int', so it can never be less than zero. This fact makes the "val < 0" part of the test done in BUG_ON() in mc13xxx_regulator_get_voltage() rather pointles since it can never have any effect. This patch removes the pointless test. Signed-off-by: Jesper Juhl Acked-by: Alberto Panizzo Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/mc13xxx-regulator-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c index f53d31b950d..2bb5de1f242 100644 --- a/drivers/regulator/mc13xxx-regulator-core.c +++ b/drivers/regulator/mc13xxx-regulator-core.c @@ -174,7 +174,7 @@ static int mc13xxx_regulator_get_voltage(struct regulator_dev *rdev) dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val); - BUG_ON(val < 0 || val > mc13xxx_regulators[id].desc.n_voltages); + BUG_ON(val > mc13xxx_regulators[id].desc.n_voltages); return mc13xxx_regulators[id].voltages[val]; } -- cgit v1.2.3-70-g09d2 From 69cf0218d1f0d1d8f14687fec070126021502451 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 17 Feb 2011 10:37:23 -0200 Subject: perf hists: Print number of samples, not the period sum So that we match the header where we state the number of events with the "Samples" column when using 'perf report -n/--show-nr-samples': [root@emilia ~]# perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.111 MB perf.data (~4860 samples) ] [root@emilia ~]# perf report --stdio --show-nr-samples # Events: 11 cycles # # Overhead Samples Command Shared Object Symbol # ........ .......... ........... .................. ............................ # 16.65% 1 sleep [kernel.kallsyms] [k] unmap_vmas 16.10% 1 perf libpthread-2.12.so [.] __pthread_cleanup_push_defer 15.79% 2 perf [kernel.kallsyms] [k] format_decode 12.88% 1 kworker/1:2 [kernel.kallsyms] [k] cache_reap 10.69% 1 swapper [kernel.kallsyms] [k] _raw_spin_lock 7.55% 1 sleep [kernel.kallsyms] [k] prepare_exec_creds 6.00% 1 perf [jbd2] [k] start_this_handle 5.29% 1 perf [kernel.kallsyms] [k] seq_read 4.75% 1 perf [kernel.kallsyms] [k] get_pid_task 4.30% 1 perf [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore # # (For a higher level overview, try: perf report --sort comm,dso) # [root@emilia ~]# Reported-by: Stephane Eranian Reported-by: Cliff Wickman Acked-by: Stephane Eranian Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi Cc: LKML-Reference: Signed-off-by: Arnaldo Carvalho de Melo [ cherry-picked it from perf/core, as it has been reported by others as well. ] Signed-off-by: Ingo Molnar --- tools/perf/util/hist.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c index 32f4f1f2f6e..df51560f16f 100644 --- a/tools/perf/util/hist.c +++ b/tools/perf/util/hist.c @@ -585,6 +585,7 @@ int hist_entry__snprintf(struct hist_entry *self, char *s, size_t size, { struct sort_entry *se; u64 period, total, period_sys, period_us, period_guest_sys, period_guest_us; + u64 nr_events; const char *sep = symbol_conf.field_sep; int ret; @@ -593,6 +594,7 @@ int hist_entry__snprintf(struct hist_entry *self, char *s, size_t size, if (pair_hists) { period = self->pair ? self->pair->period : 0; + nr_events = self->pair ? self->pair->nr_events : 0; total = pair_hists->stats.total_period; period_sys = self->pair ? self->pair->period_sys : 0; period_us = self->pair ? self->pair->period_us : 0; @@ -600,6 +602,7 @@ int hist_entry__snprintf(struct hist_entry *self, char *s, size_t size, period_guest_us = self->pair ? self->pair->period_guest_us : 0; } else { period = self->period; + nr_events = self->nr_events; total = session_total; period_sys = self->period_sys; period_us = self->period_us; @@ -640,9 +643,9 @@ int hist_entry__snprintf(struct hist_entry *self, char *s, size_t size, if (symbol_conf.show_nr_samples) { if (sep) - ret += snprintf(s + ret, size - ret, "%c%" PRIu64, *sep, period); + ret += snprintf(s + ret, size - ret, "%c%" PRIu64, *sep, nr_events); else - ret += snprintf(s + ret, size - ret, "%11" PRIu64, period); + ret += snprintf(s + ret, size - ret, "%11" PRIu64, nr_events); } if (pair_hists) { -- cgit v1.2.3-70-g09d2 From 4bfc4e2508234f9149fd33fae853e99fb9e4a75b Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Wed, 23 Feb 2011 02:29:11 +0300 Subject: ASoC: correct pxa AC97 DAI names Correct names for pxa AC97 DAI are pxa2xx-ac97 and pxa2xx-ac97-aux. Fix that for all PXA platforms. Signed-off-by: Dmitry Eremin-Solenikov Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/pxa/e740_wm9705.c | 4 ++-- sound/soc/pxa/e750_wm9705.c | 4 ++-- sound/soc/pxa/e800_wm9712.c | 4 ++-- sound/soc/pxa/em-x270.c | 4 ++-- sound/soc/pxa/mioa701_wm9713.c | 4 ++-- sound/soc/pxa/palm27x.c | 4 ++-- sound/soc/pxa/tosa.c | 4 ++-- sound/soc/pxa/zylonite.c | 4 ++-- 8 files changed, 16 insertions(+), 16 deletions(-) diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c index 28333e7d9c5..dc65650a6fa 100644 --- a/sound/soc/pxa/e740_wm9705.c +++ b/sound/soc/pxa/e740_wm9705.c @@ -117,7 +117,7 @@ static struct snd_soc_dai_link e740_dai[] = { { .name = "AC97", .stream_name = "AC97 HiFi", - .cpu_dai_name = "pxa-ac97.0", + .cpu_dai_name = "pxa2xx-ac97", .codec_dai_name = "wm9705-hifi", .platform_name = "pxa-pcm-audio", .codec_name = "wm9705-codec", @@ -126,7 +126,7 @@ static struct snd_soc_dai_link e740_dai[] = { { .name = "AC97 Aux", .stream_name = "AC97 Aux", - .cpu_dai_name = "pxa-ac97.1", + .cpu_dai_name = "pxa2xx-ac97-aux", .codec_dai_name = "wm9705-aux", .platform_name = "pxa-pcm-audio", .codec_name = "wm9705-codec", diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c index 01bf31675c5..51897fcd911 100644 --- a/sound/soc/pxa/e750_wm9705.c +++ b/sound/soc/pxa/e750_wm9705.c @@ -99,7 +99,7 @@ static struct snd_soc_dai_link e750_dai[] = { { .name = "AC97", .stream_name = "AC97 HiFi", - .cpu_dai_name = "pxa-ac97.0", + .cpu_dai_name = "pxa2xx-ac97", .codec_dai_name = "wm9705-hifi", .platform_name = "pxa-pcm-audio", .codec_name = "wm9705-codec", @@ -109,7 +109,7 @@ static struct snd_soc_dai_link e750_dai[] = { { .name = "AC97 Aux", .stream_name = "AC97 Aux", - .cpu_dai_name = "pxa-ac97.1", + .cpu_dai_name = "pxa2xx-ac97-aux", .codec_dai_name ="wm9705-aux", .platform_name = "pxa-pcm-audio", .codec_name = "wm9705-codec", diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c index c6a37c6ef23..053ed208e59 100644 --- a/sound/soc/pxa/e800_wm9712.c +++ b/sound/soc/pxa/e800_wm9712.c @@ -89,7 +89,7 @@ static struct snd_soc_dai_link e800_dai[] = { { .name = "AC97", .stream_name = "AC97 HiFi", - .cpu_dai_name = "pxa-ac97.0", + .cpu_dai_name = "pxa2xx-ac97", .codec_dai_name = "wm9712-hifi", .platform_name = "pxa-pcm-audio", .codec_name = "wm9712-codec", @@ -98,7 +98,7 @@ static struct snd_soc_dai_link e800_dai[] = { { .name = "AC97 Aux", .stream_name = "AC97 Aux", - .cpu_dai_name = "pxa-ac97.1", + .cpu_dai_name = "pxa2xx-ac97-aux", .codec_dai_name ="wm9712-aux", .platform_name = "pxa-pcm-audio", .codec_name = "wm9712-codec", diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c index fc22e6eefc9..b13a4252812 100644 --- a/sound/soc/pxa/em-x270.c +++ b/sound/soc/pxa/em-x270.c @@ -37,7 +37,7 @@ static struct snd_soc_dai_link em_x270_dai[] = { { .name = "AC97", .stream_name = "AC97 HiFi", - .cpu_dai_name = "pxa-ac97.0", + .cpu_dai_name = "pxa2xx-ac97", .codec_dai_name = "wm9712-hifi", .platform_name = "pxa-pcm-audio", .codec_name = "wm9712-codec", @@ -45,7 +45,7 @@ static struct snd_soc_dai_link em_x270_dai[] = { { .name = "AC97 Aux", .stream_name = "AC97 Aux", - .cpu_dai_name = "pxa-ac97.1", + .cpu_dai_name = "pxa2xx-ac97-aux", .codec_dai_name ="wm9712-aux", .platform_name = "pxa-pcm-audio", .codec_name = "wm9712-codec", diff --git a/sound/soc/pxa/mioa701_wm9713.c b/sound/soc/pxa/mioa701_wm9713.c index 0d70fc8c12b..38ca6759907 100644 --- a/sound/soc/pxa/mioa701_wm9713.c +++ b/sound/soc/pxa/mioa701_wm9713.c @@ -162,7 +162,7 @@ static struct snd_soc_dai_link mioa701_dai[] = { { .name = "AC97", .stream_name = "AC97 HiFi", - .cpu_dai_name = "pxa-ac97.0", + .cpu_dai_name = "pxa2xx-ac97", .codec_dai_name = "wm9713-hifi", .codec_name = "wm9713-codec", .init = mioa701_wm9713_init, @@ -172,7 +172,7 @@ static struct snd_soc_dai_link mioa701_dai[] = { { .name = "AC97 Aux", .stream_name = "AC97 Aux", - .cpu_dai_name = "pxa-ac97.1", + .cpu_dai_name = "pxa2xx-ac97-aux", .codec_dai_name ="wm9713-aux", .codec_name = "wm9713-codec", .platform_name = "pxa-pcm-audio", diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c index 857db96d4a4..504e4004f00 100644 --- a/sound/soc/pxa/palm27x.c +++ b/sound/soc/pxa/palm27x.c @@ -132,7 +132,7 @@ static struct snd_soc_dai_link palm27x_dai[] = { { .name = "AC97 HiFi", .stream_name = "AC97 HiFi", - .cpu_dai_name = "pxa-ac97.0", + .cpu_dai_name = "pxa2xx-ac97", .codec_dai_name = "wm9712-hifi", .codec_name = "wm9712-codec", .platform_name = "pxa-pcm-audio", @@ -141,7 +141,7 @@ static struct snd_soc_dai_link palm27x_dai[] = { { .name = "AC97 Aux", .stream_name = "AC97 Aux", - .cpu_dai_name = "pxa-ac97.1", + .cpu_dai_name = "pxa2xx-ac97-aux", .codec_dai_name = "wm9712-aux", .codec_name = "wm9712-codec", .platform_name = "pxa-pcm-audio", diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index f75804ef089..4b6e5d608b4 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -219,7 +219,7 @@ static struct snd_soc_dai_link tosa_dai[] = { { .name = "AC97", .stream_name = "AC97 HiFi", - .cpu_dai_name = "pxa-ac97.0", + .cpu_dai_name = "pxa2xx-ac97", .codec_dai_name = "wm9712-hifi", .platform_name = "pxa-pcm-audio", .codec_name = "wm9712-codec", @@ -229,7 +229,7 @@ static struct snd_soc_dai_link tosa_dai[] = { { .name = "AC97 Aux", .stream_name = "AC97 Aux", - .cpu_dai_name = "pxa-ac97.1", + .cpu_dai_name = "pxa2xx-ac97-aux", .codec_dai_name = "wm9712-aux", .platform_name = "pxa-pcm-audio", .codec_name = "wm9712-codec", diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c index b222a7d7202..25bba108fea 100644 --- a/sound/soc/pxa/zylonite.c +++ b/sound/soc/pxa/zylonite.c @@ -166,7 +166,7 @@ static struct snd_soc_dai_link zylonite_dai[] = { .stream_name = "AC97 HiFi", .codec_name = "wm9713-codec", .platform_name = "pxa-pcm-audio", - .cpu_dai_name = "pxa-ac97.0", + .cpu_dai_name = "pxa2xx-ac97", .codec_name = "wm9713-hifi", .init = zylonite_wm9713_init, }, @@ -175,7 +175,7 @@ static struct snd_soc_dai_link zylonite_dai[] = { .stream_name = "AC97 Aux", .codec_name = "wm9713-codec", .platform_name = "pxa-pcm-audio", - .cpu_dai_name = "pxa-ac97.1", + .cpu_dai_name = "pxa2xx-ac97-aux", .codec_name = "wm9713-aux", }, { -- cgit v1.2.3-70-g09d2 From 43c63188821dc21b2af23a40a18faea6e386e90a Mon Sep 17 00:00:00 2001 From: Eric Bénard Date: Fri, 25 Feb 2011 13:47:46 +0100 Subject: eukrea-tlv320: fix platform_name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit f0fba2ad1b6b53d5360125c41953b7afcd6deff0 included a mistake on the name of the platform in the snd_soc_dai_link structure. Signed-off-by: Eric Bénard Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/imx/eukrea-tlv320.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/imx/eukrea-tlv320.c index e20c9e1457c..1e9bccae4e8 100644 --- a/sound/soc/imx/eukrea-tlv320.c +++ b/sound/soc/imx/eukrea-tlv320.c @@ -79,7 +79,7 @@ static struct snd_soc_dai_link eukrea_tlv320_dai = { .name = "tlv320aic23", .stream_name = "TLV320AIC23", .codec_dai_name = "tlv320aic23-hifi", - .platform_name = "imx-pcm-audio.0", + .platform_name = "imx-fiq-pcm-audio.0", .codec_name = "tlv320aic23-codec.0-001a", .cpu_dai_name = "imx-ssi.0", .ops = &eukrea_tlv320_snd_ops, -- cgit v1.2.3-70-g09d2 From 5a18ec176c934ca1bc9dc61580a5e0e90a9b5733 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 25 Feb 2011 14:44:58 +0100 Subject: fuse: fix hang of single threaded fuseblk filesystem Single threaded NTFS-3G could get stuck if a delayed RELEASE reply triggered a DESTROY request via path_put(). Fix this by a) making RELEASE requests synchronous, whenever possible, on fuseblk filesystems b) if not possible (triggered by an asynchronous read/write) then do the path_put() in a separate thread with schedule_work(). Reported-by: Oliver Neukum Cc: stable@kernel.org Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 52 +++++++++++++++++++++++++++++++++++++++++++++------- fs/fuse/fuse_i.h | 6 +++++- 2 files changed, 50 insertions(+), 8 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 95da1bc1c82..9e0832dbb1e 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -86,18 +86,52 @@ struct fuse_file *fuse_file_get(struct fuse_file *ff) return ff; } +static void fuse_release_async(struct work_struct *work) +{ + struct fuse_req *req; + struct fuse_conn *fc; + struct path path; + + req = container_of(work, struct fuse_req, misc.release.work); + path = req->misc.release.path; + fc = get_fuse_conn(path.dentry->d_inode); + + fuse_put_request(fc, req); + path_put(&path); +} + static void fuse_release_end(struct fuse_conn *fc, struct fuse_req *req) { - path_put(&req->misc.release.path); + if (fc->destroy_req) { + /* + * If this is a fuseblk mount, then it's possible that + * releasing the path will result in releasing the + * super block and sending the DESTROY request. If + * the server is single threaded, this would hang. + * For this reason do the path_put() in a separate + * thread. + */ + atomic_inc(&req->count); + INIT_WORK(&req->misc.release.work, fuse_release_async); + schedule_work(&req->misc.release.work); + } else { + path_put(&req->misc.release.path); + } } -static void fuse_file_put(struct fuse_file *ff) +static void fuse_file_put(struct fuse_file *ff, bool sync) { if (atomic_dec_and_test(&ff->count)) { struct fuse_req *req = ff->reserved_req; - req->end = fuse_release_end; - fuse_request_send_background(ff->fc, req); + if (sync) { + fuse_request_send(ff->fc, req); + path_put(&req->misc.release.path); + fuse_put_request(ff->fc, req); + } else { + req->end = fuse_release_end; + fuse_request_send_background(ff->fc, req); + } kfree(ff); } } @@ -219,8 +253,12 @@ void fuse_release_common(struct file *file, int opcode) * Normally this will send the RELEASE request, however if * some asynchronous READ or WRITE requests are outstanding, * the sending will be delayed. + * + * Make the release synchronous if this is a fuseblk mount, + * synchronous RELEASE is allowed (and desirable) in this case + * because the server can be trusted not to screw up. */ - fuse_file_put(ff); + fuse_file_put(ff, ff->fc->destroy_req != NULL); } static int fuse_open(struct inode *inode, struct file *file) @@ -558,7 +596,7 @@ static void fuse_readpages_end(struct fuse_conn *fc, struct fuse_req *req) page_cache_release(page); } if (req->ff) - fuse_file_put(req->ff); + fuse_file_put(req->ff, false); } static void fuse_send_readpages(struct fuse_req *req, struct file *file) @@ -1137,7 +1175,7 @@ static ssize_t fuse_direct_write(struct file *file, const char __user *buf, static void fuse_writepage_free(struct fuse_conn *fc, struct fuse_req *req) { __free_page(req->pages[0]); - fuse_file_put(req->ff); + fuse_file_put(req->ff, false); } static void fuse_writepage_finish(struct fuse_conn *fc, struct fuse_req *req) diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index ae5744a2f9e..d4286947bc2 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -21,6 +21,7 @@ #include #include #include +#include /** Max number of pages that can be used in a single read request */ #define FUSE_MAX_PAGES_PER_REQ 32 @@ -262,7 +263,10 @@ struct fuse_req { /** Data for asynchronous requests */ union { struct { - struct fuse_release_in in; + union { + struct fuse_release_in in; + struct work_struct work; + }; struct path path; } release; struct fuse_init_in init_in; -- cgit v1.2.3-70-g09d2 From 8d56addd70c7c0626502569e22cc8fce49ae39f5 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 25 Feb 2011 14:44:58 +0100 Subject: fuse: fix truncate after open Commit e1181ee6 "vfs: pass struct file to do_truncate on O_TRUNC opens" broke the behavior of open(O_TRUNC|O_RDONLY) in fuse. Fuse assumed that when called from open, a truncate() will be done, not an ftruncate(). Fix by restoring the old behavior, based on the ATTR_OPEN flag. Signed-off-by: Miklos Szeredi --- fs/fuse/dir.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index bfed8447ed8..83543b5ff94 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -1283,8 +1283,11 @@ static int fuse_do_setattr(struct dentry *entry, struct iattr *attr, if (err) return err; - if ((attr->ia_valid & ATTR_OPEN) && fc->atomic_o_trunc) - return 0; + if (attr->ia_valid & ATTR_OPEN) { + if (fc->atomic_o_trunc) + return 0; + file = NULL; + } if (attr->ia_valid & ATTR_SIZE) is_truncate = true; -- cgit v1.2.3-70-g09d2 From f129ccc9231c95513a1227ca9da876beeb03e577 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 25 Feb 2011 15:33:02 +0000 Subject: afs: Fix oops in afs_unlink_writeback I'm seeing the following oops when testing afs: Unable to handle kernel paging request for data at address 0x00000008 ... NIP [c0000000003393b0] .afs_unlink_writeback+0x38/0xc0 LR [c00000000033987c] .afs_put_writeback+0x98/0xec Call Trace: [c00000000345f600] [c00000000033987c] .afs_put_writeback+0x98/0xec [c00000000345f690] [c00000000033ae80] .afs_write_begin+0x6a4/0x75c [c00000000345f790] [c00000000012b77c] .generic_file_buffered_write+0x148/0x320 [c00000000345f8d0] [c00000000012e1b8] .__generic_file_aio_write+0x37c/0x3e4 [c00000000345f9d0] [c00000000012e2a8] .generic_file_aio_write+0x88/0xfc [c00000000345fa90] [c0000000003390a8] .afs_file_write+0x10c/0x178 [c00000000345fb40] [c000000000188788] .do_sync_write+0xc4/0x128 [c00000000345fcc0] [c000000000189658] .vfs_write+0xe8/0x1d8 [c00000000345fd70] [c000000000189884] .SyS_write+0x68/0xb0 [c00000000345fe30] [c000000000008564] syscall_exit+0x0/0x40 afs_write_begin hits an error and calls afs_unlink_writeback. In there we do list_del_init on an uninitialised list. The patch below initialises ->link when creating the afs_writeback struct. Signed-off-by: Anton Blanchard Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/afs/write.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/afs/write.c b/fs/afs/write.c index 15690bb1d3b..789b3afb342 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -140,6 +140,7 @@ int afs_write_begin(struct file *file, struct address_space *mapping, candidate->first = candidate->last = index; candidate->offset_first = from; candidate->to_last = to; + INIT_LIST_HEAD(&candidate->link); candidate->usage = 1; candidate->state = AFS_WBACK_PENDING; init_waitqueue_head(&candidate->waitq); -- cgit v1.2.3-70-g09d2 From 0a93ea2e897bd793cc0aaaddc397eff32ac8d6fe Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 25 Feb 2011 15:33:17 +0000 Subject: RxRPC: Allocate tokens with kzalloc to avoid oops in rxrpc_destroy With slab poisoning enabled, I see the following oops: Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6b73 ... NIP [c0000000006bc61c] .rxrpc_destroy+0x44/0x104 LR [c0000000006bc618] .rxrpc_destroy+0x40/0x104 Call Trace: [c0000000feb2bc00] [c0000000006bc618] .rxrpc_destroy+0x40/0x104 (unreliable) [c0000000feb2bc90] [c000000000349b2c] .key_cleanup+0x1a8/0x20c [c0000000feb2bd40] [c0000000000a2920] .process_one_work+0x2f4/0x4d0 [c0000000feb2be00] [c0000000000a2d50] .worker_thread+0x254/0x468 [c0000000feb2bec0] [c0000000000a868c] .kthread+0xbc/0xc8 [c0000000feb2bf90] [c000000000020e00] .kernel_thread+0x54/0x70 We aren't initialising token->next, but the code in destroy_context relies on the list being NULL terminated. Use kzalloc to zero out all the fields. Signed-off-by: Anton Blanchard Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- net/rxrpc/ar-key.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/rxrpc/ar-key.c b/net/rxrpc/ar-key.c index 5ee16f0353f..d763793d39d 100644 --- a/net/rxrpc/ar-key.c +++ b/net/rxrpc/ar-key.c @@ -89,11 +89,11 @@ static int rxrpc_instantiate_xdr_rxkad(struct key *key, const __be32 *xdr, return ret; plen -= sizeof(*token); - token = kmalloc(sizeof(*token), GFP_KERNEL); + token = kzalloc(sizeof(*token), GFP_KERNEL); if (!token) return -ENOMEM; - token->kad = kmalloc(plen, GFP_KERNEL); + token->kad = kzalloc(plen, GFP_KERNEL); if (!token->kad) { kfree(token); return -ENOMEM; @@ -731,10 +731,10 @@ static int rxrpc_instantiate(struct key *key, const void *data, size_t datalen) goto error; ret = -ENOMEM; - token = kmalloc(sizeof(*token), GFP_KERNEL); + token = kzalloc(sizeof(*token), GFP_KERNEL); if (!token) goto error; - token->kad = kmalloc(plen, GFP_KERNEL); + token->kad = kzalloc(plen, GFP_KERNEL); if (!token->kad) goto error_free; -- cgit v1.2.3-70-g09d2 From 51c404b2c514930e98e81e0b9294f19892a4f871 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 4 Feb 2011 15:28:57 +0530 Subject: omap4: prcm: Fix the CPUx clockdomain offsets CPU0 and CPU1 clockdomain is at the offset of 0x18 from the LPRM base. The header file has set it wrongly to 0x0. Offset 0x0 is for CPUx power domain control register Fix the same. The autogen scripts is fixed thanks to Benoit Cousson With the old value, the clockdomain code would access the *_PWRSTCTRL.POWERSTATE field when it thought it was accessing the *_CLKSTCTRL.CLKTRCTRL field. In the worst case, this could cause system power management to behave incorrectly. Signed-off-by: Santosh Shilimkar Cc: Paul Walmsley Cc: Rajendra Nayak Cc: Benoit Cousson [paul@pwsan.com: added second paragraph to commit message] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/prcm_mpu44xx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index 729a644ce85..3300ff6e3cf 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -38,8 +38,8 @@ #define OMAP4430_PRCM_MPU_CPU1_INST 0x0800 /* PRCM_MPU clockdomain register offsets (from instance start) */ -#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0000 -#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0000 +#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0018 +#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0018 /* -- cgit v1.2.3-70-g09d2 From d40358509ee862d7e4049187bc05eba1911a2959 Mon Sep 17 00:00:00 2001 From: Jelle Martijn Kok Date: Fri, 25 Feb 2011 11:13:55 -0800 Subject: RTC: fix typo in drivers/rtc/rtc-at91sam9.c The member of the rtc_class_ops struct is called alarm_irq_enable and not alarm_irq_enabled CC: Thomas Gleixner Signed-off-by: Jelle Martijn Kok Signed-off-by: John Stultz Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-at91sam9.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index c36749e4c92..5469c52cba3 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -309,7 +309,7 @@ static const struct rtc_class_ops at91_rtc_ops = { .read_alarm = at91_rtc_readalarm, .set_alarm = at91_rtc_setalarm, .proc = at91_rtc_proc, - .alarm_irq_enabled = at91_rtc_alarm_irq_enable, + .alarm_irq_enable = at91_rtc_alarm_irq_enable, }; /* -- cgit v1.2.3-70-g09d2 From 22bacca48a1755f79b7e0f192ddb9fbb7fc6e64e Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Fri, 25 Feb 2011 14:44:12 -0800 Subject: epoll: prevent creating circular epoll structures In several places, an epoll fd can call another file's ->f_op->poll() method with ep->mtx held. This is in general unsafe, because that other file could itself be an epoll fd that contains the original epoll fd. The code defends against this possibility in its own ->poll() method using ep_call_nested, but there are several other unsafe calls to ->poll elsewhere that can be made to deadlock. For example, the following simple program causes the call in ep_insert recursively call the original fd's ->poll, leading to deadlock: #include #include int main(void) { int e1, e2, p[2]; struct epoll_event evt = { .events = EPOLLIN }; e1 = epoll_create(1); e2 = epoll_create(2); pipe(p); epoll_ctl(e2, EPOLL_CTL_ADD, e1, &evt); epoll_ctl(e1, EPOLL_CTL_ADD, p[0], &evt); write(p[1], p, sizeof p); epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt); return 0; } On insertion, check whether the inserted file is itself a struct epoll, and if so, do a recursive walk to detect whether inserting this file would create a loop of epoll structures, which could lead to deadlock. [nelhage@ksplice.com: Use epmutex to serialize concurrent inserts] Signed-off-by: Davide Libenzi Signed-off-by: Nelson Elhage Reported-by: Nelson Elhage Tested-by: Nelson Elhage Cc: [2.6.34+, possibly earlier] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/eventpoll.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 95 insertions(+) diff --git a/fs/eventpoll.c b/fs/eventpoll.c index 267d0ada454..4a09af9e9a6 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -63,6 +63,13 @@ * cleanup path and it is also acquired by eventpoll_release_file() * if a file has been pushed inside an epoll set and it is then * close()d without a previous call toepoll_ctl(EPOLL_CTL_DEL). + * It is also acquired when inserting an epoll fd onto another epoll + * fd. We do this so that we walk the epoll tree and ensure that this + * insertion does not create a cycle of epoll file descriptors, which + * could lead to deadlock. We need a global mutex to prevent two + * simultaneous inserts (A into B and B into A) from racing and + * constructing a cycle without either insert observing that it is + * going to. * It is possible to drop the "ep->mtx" and to use the global * mutex "epmutex" (together with "ep->lock") to have it working, * but having "ep->mtx" will make the interface more scalable. @@ -224,6 +231,9 @@ static long max_user_watches __read_mostly; */ static DEFINE_MUTEX(epmutex); +/* Used to check for epoll file descriptor inclusion loops */ +static struct nested_calls poll_loop_ncalls; + /* Used for safe wake up implementation */ static struct nested_calls poll_safewake_ncalls; @@ -1198,6 +1208,62 @@ retry: return res; } +/** + * ep_loop_check_proc - Callback function to be passed to the @ep_call_nested() + * API, to verify that adding an epoll file inside another + * epoll structure, does not violate the constraints, in + * terms of closed loops, or too deep chains (which can + * result in excessive stack usage). + * + * @priv: Pointer to the epoll file to be currently checked. + * @cookie: Original cookie for this call. This is the top-of-the-chain epoll + * data structure pointer. + * @call_nests: Current dept of the @ep_call_nested() call stack. + * + * Returns: Returns zero if adding the epoll @file inside current epoll + * structure @ep does not violate the constraints, or -1 otherwise. + */ +static int ep_loop_check_proc(void *priv, void *cookie, int call_nests) +{ + int error = 0; + struct file *file = priv; + struct eventpoll *ep = file->private_data; + struct rb_node *rbp; + struct epitem *epi; + + mutex_lock(&ep->mtx); + for (rbp = rb_first(&ep->rbr); rbp; rbp = rb_next(rbp)) { + epi = rb_entry(rbp, struct epitem, rbn); + if (unlikely(is_file_epoll(epi->ffd.file))) { + error = ep_call_nested(&poll_loop_ncalls, EP_MAX_NESTS, + ep_loop_check_proc, epi->ffd.file, + epi->ffd.file->private_data, current); + if (error != 0) + break; + } + } + mutex_unlock(&ep->mtx); + + return error; +} + +/** + * ep_loop_check - Performs a check to verify that adding an epoll file (@file) + * another epoll file (represented by @ep) does not create + * closed loops or too deep chains. + * + * @ep: Pointer to the epoll private data structure. + * @file: Pointer to the epoll file to be checked. + * + * Returns: Returns zero if adding the epoll @file inside current epoll + * structure @ep does not violate the constraints, or -1 otherwise. + */ +static int ep_loop_check(struct eventpoll *ep, struct file *file) +{ + return ep_call_nested(&poll_loop_ncalls, EP_MAX_NESTS, + ep_loop_check_proc, file, ep, current); +} + /* * Open an eventpoll file descriptor. */ @@ -1246,6 +1312,7 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, int, op, int, fd, struct epoll_event __user *, event) { int error; + int did_lock_epmutex = 0; struct file *file, *tfile; struct eventpoll *ep; struct epitem *epi; @@ -1287,6 +1354,25 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, int, op, int, fd, */ ep = file->private_data; + /* + * When we insert an epoll file descriptor, inside another epoll file + * descriptor, there is the change of creating closed loops, which are + * better be handled here, than in more critical paths. + * + * We hold epmutex across the loop check and the insert in this case, in + * order to prevent two separate inserts from racing and each doing the + * insert "at the same time" such that ep_loop_check passes on both + * before either one does the insert, thereby creating a cycle. + */ + if (unlikely(is_file_epoll(tfile) && op == EPOLL_CTL_ADD)) { + mutex_lock(&epmutex); + did_lock_epmutex = 1; + error = -ELOOP; + if (ep_loop_check(ep, tfile) != 0) + goto error_tgt_fput; + } + + mutex_lock(&ep->mtx); /* @@ -1322,6 +1408,9 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, int, op, int, fd, mutex_unlock(&ep->mtx); error_tgt_fput: + if (unlikely(did_lock_epmutex)) + mutex_unlock(&epmutex); + fput(tfile); error_fput: fput(file); @@ -1441,6 +1530,12 @@ static int __init eventpoll_init(void) EP_ITEM_COST; BUG_ON(max_user_watches < 0); + /* + * Initialize the structure used to perform epoll file descriptor + * inclusion loops checks. + */ + ep_nested_calls_init(&poll_loop_ncalls); + /* Initialize the structure used to perform safe poll wait head wake ups */ ep_nested_calls_init(&poll_safewake_ncalls); -- cgit v1.2.3-70-g09d2 From a879bf582dfb3a79d30d76ca3af2ae8a0f39010c Mon Sep 17 00:00:00 2001 From: Greg Thelen Date: Fri, 25 Feb 2011 14:44:13 -0800 Subject: mm: grab rcu read lock in move_pages() The move_pages() usage of find_task_by_vpid() requires rcu_read_lock() to prevent free_pid() from reclaiming the pid. Without this patch, RCU warnings are printed in v2.6.38-rc4 move_pages() with: CONFIG_LOCKUP_DETECTOR=y CONFIG_PREEMPT=y CONFIG_LOCKDEP=y CONFIG_PROVE_LOCKING=y CONFIG_PROVE_RCU=y Previously, migrate_pages() went through a similar transformation replacing usage of tasklist_lock with rcu read lock: commit 55cfaa3cbdd29c4919ecb5fb8965c310f357e48c Author: Zeng Zhaoming Date: Thu Dec 2 14:31:13 2010 -0800 mm/mempolicy.c: add rcu read lock to protect pid structure commit 1e50df39f6e2c3a4a3394df62baa8a213df16c54 Author: KOSAKI Motohiro Date: Thu Jan 13 15:46:14 2011 -0800 mempolicy: remove tasklist_lock from migrate_pages Signed-off-by: Greg Thelen Cc: Mel Gorman Cc: Minchan Kim Cc: Rik van Riel Cc: KAMEZAWA Hiroyuki Cc: "Paul E. McKenney" Cc: Tetsuo Handa Cc: Sergey Senozhatsky Cc: Oleg Nesterov Cc: Zeng Zhaoming Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/migrate.c b/mm/migrate.c index 76611525380..352de555626 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -1287,14 +1287,14 @@ SYSCALL_DEFINE6(move_pages, pid_t, pid, unsigned long, nr_pages, return -EPERM; /* Find the mm_struct */ - read_lock(&tasklist_lock); + rcu_read_lock(); task = pid ? find_task_by_vpid(pid) : current; if (!task) { - read_unlock(&tasklist_lock); + rcu_read_unlock(); return -ESRCH; } mm = get_task_mm(task); - read_unlock(&tasklist_lock); + rcu_read_unlock(); if (!mm) return -EINVAL; -- cgit v1.2.3-70-g09d2 From f8407f26b4c9a36aab74fcdbd6e14ffe4f8d9476 Mon Sep 17 00:00:00 2001 From: Harry Wei Date: Fri, 25 Feb 2011 14:44:15 -0800 Subject: MAINTAINERS: add Chinese documentation maintainer I have translated some kernel documentation so I wish to maintain the Chinese documentation in our kernel directories. Signed-off-by: Harry Wei Cc: Joe Perches Cc: Greg KH Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 98710933ac1..8afba6321e2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1692,6 +1692,13 @@ M: Andy Whitcroft S: Supported F: scripts/checkpatch.pl +CHINESE DOCUMENTATION +M: Harry Wei +L: xiyoulinuxkernelgroup@googlegroups.com +L: linux-kernel@zh-kernel.org (moderated for non-subscribers) +S: Maintained +F: Documentation/zh_CN/ + CISCO VIC ETHERNET NIC DRIVER M: Vasanthy Kolluri M: Roopa Prabhu -- cgit v1.2.3-70-g09d2 From fba99fa38b023224680308a482e12a0eca87e4e1 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 25 Feb 2011 14:44:16 -0800 Subject: swiotlb: fix wrong panic swiotlb's map_page wrongly calls panic() when it can't find a buffer fit for device's dma mask. It should return an error instead. Devices with an odd dma mask (i.e. under 4G) like b44 network card hit this bug (the system crashes): http://marc.info/?l=linux-kernel&m=129648943830106&w=2 If swiotlb returns an error, b44 driver can use the own bouncing mechanism. Reported-by: Chuck Ebbert Signed-off-by: FUJITA Tomonori Tested-by: Arkadiusz Miskiewicz Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/swiotlb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/lib/swiotlb.c b/lib/swiotlb.c index c47bbe11b80..93ca08b8a45 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -686,8 +686,10 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page, /* * Ensure that the address returned is DMA'ble */ - if (!dma_capable(dev, dev_addr, size)) - panic("map_single: bounce buffer is not DMA'ble"); + if (!dma_capable(dev, dev_addr, size)) { + swiotlb_tbl_unmap_single(dev, map, size, dir); + dev_addr = swiotlb_virt_to_bus(dev, io_tlb_overflow_buffer); + } return dev_addr; } -- cgit v1.2.3-70-g09d2 From d73fa4b914eab332d9919132b273b6797b8aface Mon Sep 17 00:00:00 2001 From: "Matti J. Aaltonen" Date: Fri, 25 Feb 2011 14:44:18 -0800 Subject: drivers/nfc/Kconfig: use full form of the NFC acronym Spell out the NFC acronym when it's shown for the first time. Signed-off-by: Matti J. Aaltonen Acked-by: Wolfram Sang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/nfc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index ffedfd49275..ea158008534 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -3,7 +3,7 @@ # menuconfig NFC_DEVICES - bool "NFC devices" + bool "Near Field Communication (NFC) devices" default n ---help--- You'll have to say Y if your computer contains an NFC device that -- cgit v1.2.3-70-g09d2 From ac3c8304190ed0daaa2fb01ce2a069be5e2a52a7 Mon Sep 17 00:00:00 2001 From: "Matti J. Aaltonen" Date: Fri, 25 Feb 2011 14:44:19 -0800 Subject: drivers/nfc/pn544.c: add missing regulator The regulator framework is used for power management. The regulators are only named in the driver code, the actual control stuff is in the board file for each architecture or use case. The PN544 chip has three regulators that can be controlled or not - depending on the architecture where the chip is being used. So some of the regulators may not be controllable. In our current case the third regulator, which was missing from the code, went unnoticed because we didn't need to control it. To be as general as possible - in this respect - the driver needs to list all regulators. Then the board file can be used to actually set the usage. Signed-off-by: Matti J. Aaltonen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/nfc/pn544.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/nfc/pn544.c b/drivers/nfc/pn544.c index bae647264dd..724f65d8f9e 100644 --- a/drivers/nfc/pn544.c +++ b/drivers/nfc/pn544.c @@ -60,7 +60,7 @@ enum pn544_irq { struct pn544_info { struct miscdevice miscdev; struct i2c_client *i2c_dev; - struct regulator_bulk_data regs[2]; + struct regulator_bulk_data regs[3]; enum pn544_state state; wait_queue_head_t read_wait; @@ -74,6 +74,7 @@ struct pn544_info { static const char reg_vdd_io[] = "Vdd_IO"; static const char reg_vbat[] = "VBat"; +static const char reg_vsim[] = "VSim"; /* sysfs interface */ static ssize_t pn544_test(struct device *dev, @@ -740,6 +741,7 @@ static int __devinit pn544_probe(struct i2c_client *client, info->regs[0].supply = reg_vdd_io; info->regs[1].supply = reg_vbat; + info->regs[2].supply = reg_vsim; r = regulator_bulk_get(&client->dev, ARRAY_SIZE(info->regs), info->regs); if (r < 0) -- cgit v1.2.3-70-g09d2 From 2876592f231d436c295b67726313f6f3cfb6e243 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 25 Feb 2011 14:44:20 -0800 Subject: mm: vmscan: stop reclaim/compaction earlier due to insufficient progress if !__GFP_REPEAT should_continue_reclaim() for reclaim/compaction allows scanning to continue even if pages are not being reclaimed until the full list is scanned. In terms of allocation success, this makes sense but potentially it introduces unwanted latency for high-order allocations such as transparent hugepages and network jumbo frames that would prefer to fail the allocation attempt and fallback to order-0 pages. Worse, there is a potential that the full LRU scan will clear all the young bits, distort page aging information and potentially push pages into swap that would have otherwise remained resident. This patch will stop reclaim/compaction if no pages were reclaimed in the last SWAP_CLUSTER_MAX pages that were considered. For allocations such as hugetlbfs that use __GFP_REPEAT and have fewer fallback options, the full LRU list may still be scanned. Order-0 allocation should not be affected because RECLAIM_MODE_COMPACTION is not set so the following avoids the gfp_mask being examined: if (!(sc->reclaim_mode & RECLAIM_MODE_COMPACTION)) return false; A tool was developed based on ftrace that tracked the latency of high-order allocations while transparent hugepage support was enabled and three benchmarks were run. The "fix-infinite" figures are 2.6.38-rc4 with Johannes's patch "vmscan: fix zone shrinking exit when scan work is done" applied. STREAM Highorder Allocation Latency Statistics fix-infinite break-early 1 :: Count 10298 10229 1 :: Min 0.4560 0.4640 1 :: Mean 1.0589 1.0183 1 :: Max 14.5990 11.7510 1 :: Stddev 0.5208 0.4719 2 :: Count 2 1 2 :: Min 1.8610 3.7240 2 :: Mean 3.4325 3.7240 2 :: Max 5.0040 3.7240 2 :: Stddev 1.5715 0.0000 9 :: Count 111696 111694 9 :: Min 0.5230 0.4110 9 :: Mean 10.5831 10.5718 9 :: Max 38.4480 43.2900 9 :: Stddev 1.1147 1.1325 Mean time for order-1 allocations is reduced. order-2 looks increased but with so few allocations, it's not particularly significant. THP mean allocation latency is also reduced. That said, allocation time varies so significantly that the reductions are within noise. Max allocation time is reduced by a significant amount for low-order allocations but reduced for THP allocations which presumably are now breaking before reclaim has done enough work. SysBench Highorder Allocation Latency Statistics fix-infinite break-early 1 :: Count 15745 15677 1 :: Min 0.4250 0.4550 1 :: Mean 1.1023 1.0810 1 :: Max 14.4590 10.8220 1 :: Stddev 0.5117 0.5100 2 :: Count 1 1 2 :: Min 3.0040 2.1530 2 :: Mean 3.0040 2.1530 2 :: Max 3.0040 2.1530 2 :: Stddev 0.0000 0.0000 9 :: Count 2017 1931 9 :: Min 0.4980 0.7480 9 :: Mean 10.4717 10.3840 9 :: Max 24.9460 26.2500 9 :: Stddev 1.1726 1.1966 Again, mean time for order-1 allocations is reduced while order-2 allocations are too few to draw conclusions from. The mean time for THP allocations is also slightly reduced albeit the reductions are within varianes. Once again, our maximum allocation time is significantly reduced for low-order allocations and slightly increased for THP allocations. Anon stream mmap reference Highorder Allocation Latency Statistics 1 :: Count 1376 1790 1 :: Min 0.4940 0.5010 1 :: Mean 1.0289 0.9732 1 :: Max 6.2670 4.2540 1 :: Stddev 0.4142 0.2785 2 :: Count 1 - 2 :: Min 1.9060 - 2 :: Mean 1.9060 - 2 :: Max 1.9060 - 2 :: Stddev 0.0000 - 9 :: Count 11266 11257 9 :: Min 0.4990 0.4940 9 :: Mean 27250.4669 24256.1919 9 :: Max 11439211.0000 6008885.0000 9 :: Stddev 226427.4624 186298.1430 This benchmark creates one thread per CPU which references an amount of anonymous memory 1.5 times the size of physical RAM. This pounds swap quite heavily and is intended to exercise THP a bit. Mean allocation time for order-1 is reduced as before. It's also reduced for THP allocations but the variations here are pretty massive due to swap. As before, maximum allocation times are significantly reduced. Overall, the patch reduces the mean and maximum allocation latencies for the smaller high-order allocations. This was with Slab configured so it would be expected to be more significant with Slub which uses these size allocations more aggressively. The mean allocation times for THP allocations are also slightly reduced. The maximum latency was slightly increased as predicted by the comments due to reclaim/compaction breaking early. However, workloads care more about the latency of lower-order allocations than THP so it's an acceptable trade-off. Signed-off-by: Mel Gorman Acked-by: Andrea Arcangeli Acked-by: Johannes Weiner Reviewed-by: Minchan Kim Acked-by: Andrea Arcangeli Acked-by: Rik van Riel Cc: Michal Hocko Cc: Kent Overstreet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 17497d0cd8b..6771ea70bfe 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1841,16 +1841,28 @@ static inline bool should_continue_reclaim(struct zone *zone, if (!(sc->reclaim_mode & RECLAIM_MODE_COMPACTION)) return false; - /* - * If we failed to reclaim and have scanned the full list, stop. - * NOTE: Checking just nr_reclaimed would exit reclaim/compaction far - * faster but obviously would be less likely to succeed - * allocation. If this is desirable, use GFP_REPEAT to decide - * if both reclaimed and scanned should be checked or just - * reclaimed - */ - if (!nr_reclaimed && !nr_scanned) - return false; + /* Consider stopping depending on scan and reclaim activity */ + if (sc->gfp_mask & __GFP_REPEAT) { + /* + * For __GFP_REPEAT allocations, stop reclaiming if the + * full LRU list has been scanned and we are still failing + * to reclaim pages. This full LRU scan is potentially + * expensive but a __GFP_REPEAT caller really wants to succeed + */ + if (!nr_reclaimed && !nr_scanned) + return false; + } else { + /* + * For non-__GFP_REPEAT allocations which can presumably + * fail without consequence, stop if we failed to reclaim + * any pages from the last SWAP_CLUSTER_MAX number of + * pages that were scanned. This will return to the + * caller faster at the risk reclaim/compaction and + * the resulting allocation attempt fails + */ + if (!nr_reclaimed) + return false; + } /* * If we have not reclaimed enough pages for compaction and the -- cgit v1.2.3-70-g09d2 From 294f6cf48666825d23c9372ef37631232746e40d Mon Sep 17 00:00:00 2001 From: Timo Warns Date: Fri, 25 Feb 2011 14:44:21 -0800 Subject: ldm: corrupted partition table can cause kernel oops The kernel automatically evaluates partition tables of storage devices. The code for evaluating LDM partitions (in fs/partitions/ldm.c) contains a bug that causes a kernel oops on certain corrupted LDM partitions. A kernel subsystem seems to crash, because, after the oops, the kernel no longer recognizes newly connected storage devices. The patch changes ldm_parse_vmdb() to Validate the value of vblk_size. Signed-off-by: Timo Warns Cc: Eugene Teo Acked-by: Richard Russon Cc: Harvey Harrison Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/partitions/ldm.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c index 789c625c7aa..b10e3540d5b 100644 --- a/fs/partitions/ldm.c +++ b/fs/partitions/ldm.c @@ -251,6 +251,11 @@ static bool ldm_parse_vmdb (const u8 *data, struct vmdb *vm) } vm->vblk_size = get_unaligned_be32(data + 0x08); + if (vm->vblk_size == 0) { + ldm_error ("Illegal VBLK size"); + return false; + } + vm->vblk_offset = get_unaligned_be32(data + 0x0C); vm->last_vblk_seq = get_unaligned_be32(data + 0x04); -- cgit v1.2.3-70-g09d2 From a2d6d2fa90c0e1d2cc1d59ccb5bbe93bb28b7413 Mon Sep 17 00:00:00 2001 From: Lei Xu Date: Fri, 25 Feb 2011 14:44:23 -0800 Subject: drivers/rtc/rtc-ds3232.c: fix time range difference between linux and RTC chip In linux rtc_time struct, tm_mon range is 0~11, tm_wday range is 0~6, while in RTC HW REG, month range is 1~12, day of the week range is 1~7, this patch adjusts difference of them. The efect of this bug was that most of month will be operated on as the next month by the hardware (When in Jan it maybe even worse). For example, if in May, software wrote 4 to the hardware, which handled it as April. Then the logic would be different between software and hardware, which would cause weird things to happen. Signed-off-by: Lei Xu Cc: Alessandro Zummo Cc: john stultz Cc: Jack Lan Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds3232.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c index 23a9ee19764..950735415a7 100644 --- a/drivers/rtc/rtc-ds3232.c +++ b/drivers/rtc/rtc-ds3232.c @@ -1,7 +1,7 @@ /* * RTC client/driver for the Maxim/Dallas DS3232 Real-Time Clock over I2C * - * Copyright (C) 2009-2010 Freescale Semiconductor. + * Copyright (C) 2009-2011 Freescale Semiconductor. * Author: Jack Lan * * This program is free software; you can redistribute it and/or modify it @@ -141,9 +141,11 @@ static int ds3232_read_time(struct device *dev, struct rtc_time *time) time->tm_hour = bcd2bin(hour); } - time->tm_wday = bcd2bin(week); + /* Day of the week in linux range is 0~6 while 1~7 in RTC chip */ + time->tm_wday = bcd2bin(week) - 1; time->tm_mday = bcd2bin(day); - time->tm_mon = bcd2bin(month & 0x7F); + /* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */ + time->tm_mon = bcd2bin(month & 0x7F) - 1; if (century) add_century = 100; @@ -162,9 +164,11 @@ static int ds3232_set_time(struct device *dev, struct rtc_time *time) buf[0] = bin2bcd(time->tm_sec); buf[1] = bin2bcd(time->tm_min); buf[2] = bin2bcd(time->tm_hour); - buf[3] = bin2bcd(time->tm_wday); /* Day of the week */ + /* Day of the week in linux range is 0~6 while 1~7 in RTC chip */ + buf[3] = bin2bcd(time->tm_wday + 1); buf[4] = bin2bcd(time->tm_mday); /* Date */ - buf[5] = bin2bcd(time->tm_mon); + /* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */ + buf[5] = bin2bcd(time->tm_mon + 1); if (time->tm_year >= 100) { buf[5] |= 0x80; buf[6] = bin2bcd(time->tm_year - 100); -- cgit v1.2.3-70-g09d2 From 29723fccc837d20039078f7a571e8d457eb0d6c6 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Fri, 25 Feb 2011 14:44:25 -0800 Subject: mm: fix dubious code in __count_immobile_pages() When pfn_valid_within() failed 'iter' was incremented twice. Signed-off-by: Namhyung Kim Reviewed-by: KAMEZAWA Hiroyuki Reviewed-by: Minchan Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index a873e61e312..cdef1d4b4e4 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5376,10 +5376,9 @@ __count_immobile_pages(struct zone *zone, struct page *page, int count) for (found = 0, iter = 0; iter < pageblock_nr_pages; iter++) { unsigned long check = pfn + iter; - if (!pfn_valid_within(check)) { - iter++; + if (!pfn_valid_within(check)) continue; - } + page = pfn_to_page(check); if (!page_count(page)) { if (PageBuddy(page)) -- cgit v1.2.3-70-g09d2 From 3bd9a5d734c7cc7533b27abf451416c7f50095a7 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 25 Feb 2011 14:44:26 -0800 Subject: aio: fix rcu ioctx lookup aio-dio-invalidate-failure GPFs in aio_put_req from io_submit. lookup_ioctx doesn't implement the rcu lookup pattern properly. rcu_read_lock does not prevent refcount going to zero, so we might take a refcount on a zero count ioctx. Fix the bug by atomically testing for zero refcount before incrementing. [jack@suse.cz: added comment into the code] Reviewed-by: Jeff Moyer Signed-off-by: Nick Piggin Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/aio.c | 35 ++++++++++++++++++++++++----------- 1 file changed, 24 insertions(+), 11 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index fc557a3be0a..b4dd668fbcc 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -239,15 +239,23 @@ static void __put_ioctx(struct kioctx *ctx) call_rcu(&ctx->rcu_head, ctx_rcu_free); } -#define get_ioctx(kioctx) do { \ - BUG_ON(atomic_read(&(kioctx)->users) <= 0); \ - atomic_inc(&(kioctx)->users); \ -} while (0) -#define put_ioctx(kioctx) do { \ - BUG_ON(atomic_read(&(kioctx)->users) <= 0); \ - if (unlikely(atomic_dec_and_test(&(kioctx)->users))) \ - __put_ioctx(kioctx); \ -} while (0) +static inline void get_ioctx(struct kioctx *kioctx) +{ + BUG_ON(atomic_read(&kioctx->users) <= 0); + atomic_inc(&kioctx->users); +} + +static inline int try_get_ioctx(struct kioctx *kioctx) +{ + return atomic_inc_not_zero(&kioctx->users); +} + +static inline void put_ioctx(struct kioctx *kioctx) +{ + BUG_ON(atomic_read(&kioctx->users) <= 0); + if (unlikely(atomic_dec_and_test(&kioctx->users))) + __put_ioctx(kioctx); +} /* ioctx_alloc * Allocates and initializes an ioctx. Returns an ERR_PTR if it failed. @@ -601,8 +609,13 @@ static struct kioctx *lookup_ioctx(unsigned long ctx_id) rcu_read_lock(); hlist_for_each_entry_rcu(ctx, n, &mm->ioctx_list, list) { - if (ctx->user_id == ctx_id && !ctx->dead) { - get_ioctx(ctx); + /* + * RCU protects us against accessing freed memory but + * we have to be careful not to get a reference when the + * reference count already dropped to 0 (ctx->dead test + * is unreliable because of races). + */ + if (ctx->user_id == ctx_id && !ctx->dead && try_get_ioctx(ctx)){ ret = ctx; break; } -- cgit v1.2.3-70-g09d2 From 7137c6bd455234bcb7560fd829e6ee49cae5fed6 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 25 Feb 2011 14:44:27 -0800 Subject: aio: fix race between io_destroy() and io_submit() A race can occur when io_submit() races with io_destroy(): CPU1 CPU2 io_submit() do_io_submit() ... ctx = lookup_ioctx(ctx_id); io_destroy() Now do_io_submit() holds the last reference to ctx. ... queue new AIO put_ioctx(ctx) - frees ctx with active AIOs We solve this issue by checking whether ctx is being destroyed in AIO submission path after adding new AIO to ctx. Then we are guaranteed that either io_destroy() waits for new AIO or we see that ctx is being destroyed and bail out. Cc: Nick Piggin Reviewed-by: Jeff Moyer Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/aio.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/fs/aio.c b/fs/aio.c index b4dd668fbcc..26869cde395 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1642,6 +1642,23 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, goto out_put_req; spin_lock_irq(&ctx->ctx_lock); + /* + * We could have raced with io_destroy() and are currently holding a + * reference to ctx which should be destroyed. We cannot submit IO + * since ctx gets freed as soon as io_submit() puts its reference. The + * check here is reliable: io_destroy() sets ctx->dead before waiting + * for outstanding IO and the barrier between these two is realized by + * unlock of mm->ioctx_lock and lock of ctx->ctx_lock. Analogously we + * increment ctx->reqs_active before checking for ctx->dead and the + * barrier is realized by unlock and lock of ctx->ctx_lock. Thus if we + * don't see ctx->dead set here, io_destroy() waits for our IO to + * finish. + */ + if (ctx->dead) { + spin_unlock_irq(&ctx->ctx_lock); + ret = -EINVAL; + goto out_put_req; + } aio_run_iocb(req); if (!list_empty(&ctx->run_list)) { /* drain the run list */ -- cgit v1.2.3-70-g09d2 From 8eac563c1c3a2047083022357ae63722b19e4e08 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 25 Feb 2011 14:44:28 -0800 Subject: thp: fix interleaving for transparent hugepages The THP code didn't pass the correct interleaving shift to the memory policy code. Fix this here by adjusting for the order. Signed-off-by: Andi Kleen Reviewed-by: Christoph Lameter Acked-by: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mempolicy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 368fc9d2361..49355a970be 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -1830,7 +1830,7 @@ alloc_pages_vma(gfp_t gfp, int order, struct vm_area_struct *vma, if (unlikely(pol->mode == MPOL_INTERLEAVE)) { unsigned nid; - nid = interleave_nid(pol, vma, addr, PAGE_SHIFT); + nid = interleave_nid(pol, vma, addr, PAGE_SHIFT + order); mpol_cond_put(pol); page = alloc_page_interleave(gfp, order, nid); put_mems_allowed(); -- cgit v1.2.3-70-g09d2 From e5598f8bf5449bc09e4005600ead32e6f2a3e79b Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Fri, 25 Feb 2011 14:44:29 -0800 Subject: memcg: more mem_cgroup_uncharge() batching It seems odd that truncate_inode_pages_range(), called not only when truncating but also when evicting inodes, has mem_cgroup_uncharge_start and _end() batching in its second loop to clear up a few leftovers, but not in its first loop that does almost all the work: add them there too. Signed-off-by: Hugh Dickins Acked-by: KAMEZAWA Hiroyuki Acked-by: Balbir Singh Acked-by: Daisuke Nishimura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/truncate.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/truncate.c b/mm/truncate.c index 49feb46e77b..d64296be00d 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -225,6 +225,7 @@ void truncate_inode_pages_range(struct address_space *mapping, next = start; while (next <= end && pagevec_lookup(&pvec, mapping, next, PAGEVEC_SIZE)) { + mem_cgroup_uncharge_start(); for (i = 0; i < pagevec_count(&pvec); i++) { struct page *page = pvec.pages[i]; pgoff_t page_index = page->index; @@ -247,6 +248,7 @@ void truncate_inode_pages_range(struct address_space *mapping, unlock_page(page); } pagevec_release(&pvec); + mem_cgroup_uncharge_end(); cond_resched(); } -- cgit v1.2.3-70-g09d2 From 99b0d365e5ade293c5fa25a9f1a49ac764656670 Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Fri, 25 Feb 2011 14:44:30 -0800 Subject: pps: initialize ts_real properly Initialize ts_real.flags to fix compiler warning about possible uninitialized use of this field. Signed-off-by: Alexander Gordeev Cc: john stultz Cc: Rodolfo Giometti Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/kapi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pps/kapi.c b/drivers/pps/kapi.c index cba1b43f751..a4e8eb9fece 100644 --- a/drivers/pps/kapi.c +++ b/drivers/pps/kapi.c @@ -168,7 +168,7 @@ void pps_event(struct pps_device *pps, struct pps_event_time *ts, int event, { unsigned long flags; int captured = 0; - struct pps_ktime ts_real; + struct pps_ktime ts_real = { .sec = 0, .nsec = 0, .flags = 0 }; /* check event type */ BUG_ON((event & (PPS_CAPTUREASSERT | PPS_CAPTURECLEAR)) == 0); -- cgit v1.2.3-70-g09d2 From fe41947e1aa12e96a50edaee123b4e4de03b668b Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 25 Feb 2011 14:44:31 -0800 Subject: rapidio: fix sysfs config attribute to access 16MB of maint space Fixes sysfs config attribute to allow access to entire 16MB maintenance space of RapidIO devices. Signed-off-by: Alexandre Bounine Cc: Kumar Gala Cc: Matt Porter Cc: Li Yang Cc: Thomas Moll Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/rio-sysfs.c | 12 ++++++------ include/linux/rio_regs.h | 4 +++- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index 76b41853a87..1269fbd2dec 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -77,9 +77,9 @@ rio_read_config(struct file *filp, struct kobject *kobj, /* Several chips lock up trying to read undefined config space */ if (capable(CAP_SYS_ADMIN)) - size = 0x200000; + size = RIO_MAINT_SPACE_SZ; - if (off > size) + if (off >= size) return 0; if (off + count > size) { size -= off; @@ -147,10 +147,10 @@ rio_write_config(struct file *filp, struct kobject *kobj, loff_t init_off = off; u8 *data = (u8 *) buf; - if (off > 0x200000) + if (off >= RIO_MAINT_SPACE_SZ) return 0; - if (off + count > 0x200000) { - size = 0x200000 - off; + if (off + count > RIO_MAINT_SPACE_SZ) { + size = RIO_MAINT_SPACE_SZ - off; count = size; } @@ -200,7 +200,7 @@ static struct bin_attribute rio_config_attr = { .name = "config", .mode = S_IRUGO | S_IWUSR, }, - .size = 0x200000, + .size = RIO_MAINT_SPACE_SZ, .read = rio_read_config, .write = rio_write_config, }; diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h index d63dcbaea16..9026b30238f 100644 --- a/include/linux/rio_regs.h +++ b/include/linux/rio_regs.h @@ -14,10 +14,12 @@ #define LINUX_RIO_REGS_H /* - * In RapidIO, each device has a 2MB configuration space that is + * In RapidIO, each device has a 16MB configuration space that is * accessed via maintenance transactions. Portions of configuration * space are standardized and/or reserved. */ +#define RIO_MAINT_SPACE_SZ 0x1000000 /* 16MB of RapidIO mainenance space */ + #define RIO_DEV_ID_CAR 0x00 /* [I] Device Identity CAR */ #define RIO_DEV_INFO_CAR 0x04 /* [I] Device Information CAR */ #define RIO_ASM_ID_CAR 0x08 /* [I] Assembly Identity CAR */ -- cgit v1.2.3-70-g09d2 From 3a142a0672b48a853f00af61f184c7341ac9c99d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 25 Feb 2011 22:34:23 +0100 Subject: clockevents: Prevent oneshot mode when broadcast device is periodic When the per cpu timer is marked CLOCK_EVT_FEAT_C3STOP, then we only can switch into oneshot mode, when the backup broadcast device supports oneshot mode as well. Otherwise we would try to switch the broadcast device into an unsupported mode unconditionally. This went unnoticed so far as the current available broadcast devices support oneshot mode. Seth unearthed this problem while debugging and working around an hpet related BIOS wreckage. Add the necessary check to tick_is_oneshot_available(). Reported-and-tested-by: Seth Forshee Signed-off-by: Thomas Gleixner LKML-Reference: Cc: stable@kernel.org # .21 -> --- kernel/time/tick-broadcast.c | 10 ++++++++++ kernel/time/tick-common.c | 6 +++++- kernel/time/tick-internal.h | 3 +++ 3 files changed, 18 insertions(+), 1 deletion(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 48b2761b566..a3b5aff6260 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -600,4 +600,14 @@ int tick_broadcast_oneshot_active(void) return tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT; } +/* + * Check whether the broadcast device supports oneshot. + */ +bool tick_broadcast_oneshot_available(void) +{ + struct clock_event_device *bc = tick_broadcast_device.evtdev; + + return bc ? bc->features & CLOCK_EVT_FEAT_ONESHOT : false; +} + #endif diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 051bc80a0c4..ed228ef6f6b 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -51,7 +51,11 @@ int tick_is_oneshot_available(void) { struct clock_event_device *dev = __this_cpu_read(tick_cpu_device.evtdev); - return dev && (dev->features & CLOCK_EVT_FEAT_ONESHOT); + if (!dev || !(dev->features & CLOCK_EVT_FEAT_ONESHOT)) + return 0; + if (!(dev->features & CLOCK_EVT_FEAT_C3STOP)) + return 1; + return tick_broadcast_oneshot_available(); } /* diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index 290eefbc1f6..f65d3a723a6 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -36,6 +36,7 @@ extern void tick_shutdown_broadcast_oneshot(unsigned int *cpup); extern int tick_resume_broadcast_oneshot(struct clock_event_device *bc); extern int tick_broadcast_oneshot_active(void); extern void tick_check_oneshot_broadcast(int cpu); +bool tick_broadcast_oneshot_available(void); # else /* BROADCAST */ static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { @@ -46,6 +47,7 @@ static inline void tick_broadcast_switch_to_oneshot(void) { } static inline void tick_shutdown_broadcast_oneshot(unsigned int *cpup) { } static inline int tick_broadcast_oneshot_active(void) { return 0; } static inline void tick_check_oneshot_broadcast(int cpu) { } +static inline bool tick_broadcast_oneshot_available(void) { return true; } # endif /* !BROADCAST */ #else /* !ONESHOT */ @@ -76,6 +78,7 @@ static inline int tick_resume_broadcast_oneshot(struct clock_event_device *bc) return 0; } static inline int tick_broadcast_oneshot_active(void) { return 0; } +static inline bool tick_broadcast_oneshot_available(void) { return false; } #endif /* !TICK_ONESHOT */ /* -- cgit v1.2.3-70-g09d2 From 6407deb59466372fd7addca38fa2f44898591897 Mon Sep 17 00:00:00 2001 From: axel lin Date: Thu, 24 Feb 2011 02:20:37 +0000 Subject: hwmon: (ad7414) add MODULE_DEVICE_TABLE The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin Signed-off-by: Guenter Roeck --- drivers/hwmon/ad7414.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c index 86d822aa9bb..d46c0c758dd 100644 --- a/drivers/hwmon/ad7414.c +++ b/drivers/hwmon/ad7414.c @@ -242,6 +242,7 @@ static const struct i2c_device_id ad7414_id[] = { { "ad7414", 0 }, {} }; +MODULE_DEVICE_TABLE(i2c, ad7414_id); static struct i2c_driver ad7414_driver = { .driver = { -- cgit v1.2.3-70-g09d2 From a7254d68b61c7873ce20591f0c56bf0245b72a76 Mon Sep 17 00:00:00 2001 From: axel lin Date: Thu, 24 Feb 2011 02:22:01 +0000 Subject: hwmon: (adt7411) add MODULE_DEVICE_TABLE The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin Acked-by: Wolfram Sang Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7411.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c index f13c843a296..5cc3e3784b4 100644 --- a/drivers/hwmon/adt7411.c +++ b/drivers/hwmon/adt7411.c @@ -334,6 +334,7 @@ static const struct i2c_device_id adt7411_id[] = { { "adt7411", 0 }, { } }; +MODULE_DEVICE_TABLE(i2c, adt7411_id); static struct i2c_driver adt7411_driver = { .driver = { -- cgit v1.2.3-70-g09d2 From 7db26623257a16c901a4b77bfc5096ee05304932 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 28 Feb 2011 14:22:12 +1000 Subject: drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo Somehow fixes a misrendering + hang at GDM startup on my NVA8... My first guess would have been stale TLB entries laying around that a new bo then accidentally inherits. That doesn't make a great deal of sense however, as when we mapped the pages for the new bo the TLBs would've gotten flushed anyway. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bo.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index d38a4d9f9b0..a52184007f5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -49,7 +49,10 @@ nouveau_bo_del_ttm(struct ttm_buffer_object *bo) DRM_ERROR("bo %p still attached to GEM object\n", bo); nv10_mem_put_tile_region(dev, nvbo->tile, NULL); - nouveau_vm_put(&nvbo->vma); + if (nvbo->vma.node) { + nouveau_vm_unmap(&nvbo->vma); + nouveau_vm_put(&nvbo->vma); + } kfree(nvbo); } -- cgit v1.2.3-70-g09d2 From 1922756124ddd53846877416d92ba4a802bc658f Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 24 Feb 2011 08:35:06 +1000 Subject: drm: fix unsigned vs signed comparison issue in modeset ctl ioctl. This fixes CVE-2011-1013. Reported-by: Matthiew Herrb (OpenBSD X.org team) Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 3 ++- include/drm/drmP.h | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 53120a72a48..28d1d3c24d6 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -1012,7 +1012,8 @@ int drm_modeset_ctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_modeset_ctl *modeset = data; - int crtc, ret = 0; + int ret = 0; + unsigned int crtc; /* If drm_vblank_init() hasn't been called yet, just no-op */ if (!dev->num_crtcs) diff --git a/include/drm/drmP.h b/include/drm/drmP.h index fe29aadb129..348843b8015 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1101,7 +1101,7 @@ struct drm_device { struct platform_device *platformdev; /**< Platform device struture */ struct drm_sg_mem *sg; /**< Scatter gather memory */ - int num_crtcs; /**< Number of CRTCs on this device */ + unsigned int num_crtcs; /**< Number of CRTCs on this device */ void *dev_private; /**< device private data */ void *mm_private; struct address_space *dev_mapping; -- cgit v1.2.3-70-g09d2 From e853072055a01d8b3c4dc89d231649189454c4f1 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Sun, 27 Feb 2011 22:36:45 +0100 Subject: perf timechart: Fix black idle boxes in the title This fix is needed for eye of gnome and firefox svg viewers. Only Inkscape can handle the broken case. Compare with the other svg_legenda_box declarations, looks like a typo slipped in at this place. Signed-off-by: Thomas Renninger Cc: Arjan van de Ven Cc: Arnaldo Carvalho de Melo Cc: lenb@kernel.org LKML-Reference: <1298842606-55712-5-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar --- tools/perf/util/svghelper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/perf/util/svghelper.c b/tools/perf/util/svghelper.c index fb737fe9be9..96c866045d6 100644 --- a/tools/perf/util/svghelper.c +++ b/tools/perf/util/svghelper.c @@ -456,9 +456,9 @@ void svg_legenda(void) return; svg_legenda_box(0, "Running", "sample"); - svg_legenda_box(100, "Idle","rect.c1"); - svg_legenda_box(200, "Deeper Idle", "rect.c3"); - svg_legenda_box(350, "Deepest Idle", "rect.c6"); + svg_legenda_box(100, "Idle","c1"); + svg_legenda_box(200, "Deeper Idle", "c3"); + svg_legenda_box(350, "Deepest Idle", "c6"); svg_legenda_box(550, "Sleeping", "process2"); svg_legenda_box(650, "Waiting for cpu", "waiting"); svg_legenda_box(800, "Blocked on IO", "blocked"); -- cgit v1.2.3-70-g09d2 From 54b08f5f90feebc9756d96e0c7bf2fdffe4af7c3 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Sun, 27 Feb 2011 22:36:46 +0100 Subject: perf timechart: Fix max number of cpus Currently numcpus is determined in pid_put_sample which is only called on sched_switch/sched_wakeup sample processing. On a machine with a lot cpus I often saw the last cpu missing. Check for (max) numcpus on every event happening and in the beginning. -> fixes the issue for me. Signed-off-by: Thomas Renninger Cc: Arjan van de Ven Cc: Arnaldo Carvalho de Melo Cc: lenb@kernel.org LKML-Reference: <1298842606-55712-6-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar --- tools/perf/builtin-timechart.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c index 746cf03cb05..0ace786e83e 100644 --- a/tools/perf/builtin-timechart.c +++ b/tools/perf/builtin-timechart.c @@ -264,9 +264,6 @@ pid_put_sample(int pid, int type, unsigned int cpu, u64 start, u64 end) c->start_time = start; if (p->start_time == 0 || p->start_time > start) p->start_time = start; - - if (cpu > numcpus) - numcpus = cpu; } #define MAX_CPUS 4096 @@ -511,6 +508,9 @@ static int process_sample_event(event_t *event __used, if (!event_str) return 0; + if (sample->cpu > numcpus) + numcpus = sample->cpu; + if (strcmp(event_str, "power:cpu_idle") == 0) { struct power_processor_entry *ppe = (void *)te; if (ppe->state == (u32)PWR_EVENT_EXIT) -- cgit v1.2.3-70-g09d2 From 299c56966a72b9109d47c71a6db52097098703dd Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Mon, 7 Feb 2011 23:25:00 -0500 Subject: x86: Use u32 instead of long to set reset vector back to 0 A customer of ours, complained that when setting the reset vector back to 0, it trashed other data and hung their box. They noticed when only 4 bytes were set to 0 instead of 8, everything worked correctly. Mathew pointed out: | | We're supposed to be resetting trampoline_phys_low and | trampoline_phys_high here, which are two 16-bit values. | Writing 64 bits is definitely going to overwrite space | that we're not supposed to be touching. | So limit the area modified to u32. Signed-off-by: Don Zickus Acked-by: Matthew Garrett Cc: LKML-Reference: <1297139100-424-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/smpboot_hooks.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/smpboot_hooks.h b/arch/x86/include/asm/smpboot_hooks.h index 6c22bf353f2..725b7783199 100644 --- a/arch/x86/include/asm/smpboot_hooks.h +++ b/arch/x86/include/asm/smpboot_hooks.h @@ -34,7 +34,7 @@ static inline void smpboot_restore_warm_reset_vector(void) */ CMOS_WRITE(0, 0xf); - *((volatile long *)phys_to_virt(apic->trampoline_phys_low)) = 0; + *((volatile u32 *)phys_to_virt(apic->trampoline_phys_low)) = 0; } static inline void __init smpboot_setup_io_apic(void) -- cgit v1.2.3-70-g09d2 From fbd71844852c9458bf73c7cbdae7189c2d4b377c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 27 Feb 2011 05:41:35 +0000 Subject: mm: must include Commit e2cda3226481 ("thp: add pmd mangling generic functions") replaced some macros in with inline functions. If the functions are to be defined (not all architectures need them) then struct vm_area_struct must be defined first. So include . Fixes a build failure seen in Debian: CC [M] drivers/media/dvb/mantis/mantis_pci.o In file included from arch/arm/include/asm/pgtable.h:460, from drivers/media/dvb/mantis/mantis_pci.c:25: include/asm-generic/pgtable.h: In function 'ptep_test_and_clear_young': include/asm-generic/pgtable.h:29: error: dereferencing pointer to incomplete type Signed-off-by: Ben Hutchings Signed-off-by: Linus Torvalds --- include/asm-generic/pgtable.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 31b6188df22..b4bfe338ea0 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -4,6 +4,8 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_MMU +#include + #ifndef __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, pte_t *ptep, -- cgit v1.2.3-70-g09d2 From af06216a8ef1c430cc6ad22b562f3a11a512c5dd Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 1 Mar 2011 01:12:19 +0100 Subject: ACPI: Fix build for CONFIG_NET unset Several ACPI drivers fail to build if CONFIG_NET is unset, because they refer to things depending on CONFIG_THERMAL that in turn depends on CONFIG_NET. However, CONFIG_THERMAL doesn't really need to depend on CONFIG_NET, because the only part of it requiring CONFIG_NET is the netlink interface in thermal_sys.c. Put the netlink interface in thermal_sys.c under #ifdef CONFIG_NET and remove the dependency of CONFIG_THERMAL on CONFIG_NET from drivers/thermal/Kconfig. Signed-off-by: Rafael J. Wysocki Acked-by: Randy Dunlap Cc: Ingo Molnar Cc: Len Brown Cc: Stephen Rothwell Cc: Luming Yu Cc: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/thermal/Kconfig | 1 - drivers/thermal/thermal_sys.c | 40 +++++++++++++++++++++------------------- include/linux/thermal.h | 8 ++++++++ 3 files changed, 29 insertions(+), 20 deletions(-) diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index f7a5dba3ca2..bf7c687519e 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -4,7 +4,6 @@ menuconfig THERMAL tristate "Generic Thermal sysfs driver" - depends on NET help Generic Thermal Sysfs driver offers a generic mechanism for thermal management. Usually it's made up of one or more thermal diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 7d0e63c7928..713b7ea4a60 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -62,20 +62,6 @@ static DEFINE_MUTEX(thermal_list_lock); static unsigned int thermal_event_seqnum; -static struct genl_family thermal_event_genl_family = { - .id = GENL_ID_GENERATE, - .name = THERMAL_GENL_FAMILY_NAME, - .version = THERMAL_GENL_VERSION, - .maxattr = THERMAL_GENL_ATTR_MAX, -}; - -static struct genl_multicast_group thermal_event_mcgrp = { - .name = THERMAL_GENL_MCAST_GROUP_NAME, -}; - -static int genetlink_init(void); -static void genetlink_exit(void); - static int get_idr(struct idr *idr, struct mutex *lock, int *id) { int err; @@ -1225,6 +1211,18 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) EXPORT_SYMBOL(thermal_zone_device_unregister); +#ifdef CONFIG_NET +static struct genl_family thermal_event_genl_family = { + .id = GENL_ID_GENERATE, + .name = THERMAL_GENL_FAMILY_NAME, + .version = THERMAL_GENL_VERSION, + .maxattr = THERMAL_GENL_ATTR_MAX, +}; + +static struct genl_multicast_group thermal_event_mcgrp = { + .name = THERMAL_GENL_MCAST_GROUP_NAME, +}; + int generate_netlink_event(u32 orig, enum events event) { struct sk_buff *skb; @@ -1301,6 +1299,15 @@ static int genetlink_init(void) return result; } +static void genetlink_exit(void) +{ + genl_unregister_family(&thermal_event_genl_family); +} +#else /* !CONFIG_NET */ +static inline int genetlink_init(void) { return 0; } +static inline void genetlink_exit(void) {} +#endif /* !CONFIG_NET */ + static int __init thermal_init(void) { int result = 0; @@ -1316,11 +1323,6 @@ static int __init thermal_init(void) return result; } -static void genetlink_exit(void) -{ - genl_unregister_family(&thermal_event_genl_family); -} - static void __exit thermal_exit(void) { class_unregister(&thermal_class); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 8651556dbd5..d3ec89fb412 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -172,6 +172,14 @@ void thermal_zone_device_update(struct thermal_zone_device *); struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, const struct thermal_cooling_device_ops *); void thermal_cooling_device_unregister(struct thermal_cooling_device *); + +#ifdef CONFIG_NET extern int generate_netlink_event(u32 orig, enum events event); +#else +static inline int generate_netlink_event(u32 orig, enum events event) +{ + return 0; +} +#endif #endif /* __THERMAL_H__ */ -- cgit v1.2.3-70-g09d2 From e6eb5ce1b202ac9cdcfda5be559c9b9d8ec7542c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 26 Feb 2011 10:54:00 -0800 Subject: fs/block_dev.c: fix new kernel-doc warning Fix new kernel-doc warning in fs/block_dev.c: Warning(fs/block_dev.c:937): No description found for parameter 'kill_dirty' Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- fs/block_dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/block_dev.c b/fs/block_dev.c index f05bf16cd97..88928701959 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -928,6 +928,7 @@ EXPORT_SYMBOL_GPL(bd_unlink_disk_holder); * flush_disk - invalidates all buffer-cache entries on a disk * * @bdev: struct block device to be flushed + * @kill_dirty: flag to guide handling of dirty inodes * * Invalidates all buffer-cache entries on a disk. It should be called * when a disk has been changed -- either by a media change or online -- cgit v1.2.3-70-g09d2 From 450adcbe518ab3a3953d8475309525d22de77cba Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Tue, 1 Mar 2011 13:40:54 -0500 Subject: blk-throttle: Do not use kblockd workqueue for throtl work o Dominik Klein reported a system hang issue while doing some blkio throttling testing. https://lkml.org/lkml/2011/2/24/173 o Some tracing revealed that CFQ was not dispatching any more jobs as queue unplug was not happening. And queue unplug was not happening because unplug work was not being called as there was one throttling work on same cpu which as not finished yet. And throttling work had not finished as it was tyring to dispatch a bio to CFQ but all the request descriptors were consume to it was put to sleep. o So basically it is a cyclic dependecny between CFQ unplug work and throtl dispatch work. Tejun suggested that use separate workqueue for such cases. o This patch uses a separate workqueue for throttle related work and does not rely on kblockd workqueue anymore. Cc: stable@kernel.org Reported-by: Dominik Klein Signed-off-by: Vivek Goyal Acked-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-core.c | 7 ------- block/blk-throttle.c | 29 ++++++++++++++++++----------- include/linux/blkdev.h | 3 --- 3 files changed, 18 insertions(+), 21 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 2f4002f79a2..792ece27616 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2610,13 +2610,6 @@ int kblockd_schedule_work(struct request_queue *q, struct work_struct *work) } EXPORT_SYMBOL(kblockd_schedule_work); -int kblockd_schedule_delayed_work(struct request_queue *q, - struct delayed_work *dwork, unsigned long delay) -{ - return queue_delayed_work(kblockd_workqueue, dwork, delay); -} -EXPORT_SYMBOL(kblockd_schedule_delayed_work); - int __init blk_dev_init(void) { BUILD_BUG_ON(__REQ_NR_BITS > 8 * diff --git a/block/blk-throttle.c b/block/blk-throttle.c index a89043a3caa..e36cc10a346 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -20,6 +20,11 @@ static int throtl_quantum = 32; /* Throttling is performed over 100ms slice and after that slice is renewed */ static unsigned long throtl_slice = HZ/10; /* 100 ms */ +/* A workqueue to queue throttle related work */ +static struct workqueue_struct *kthrotld_workqueue; +static void throtl_schedule_delayed_work(struct throtl_data *td, + unsigned long delay); + struct throtl_rb_root { struct rb_root rb; struct rb_node *left; @@ -345,10 +350,9 @@ static void throtl_schedule_next_dispatch(struct throtl_data *td) update_min_dispatch_time(st); if (time_before_eq(st->min_disptime, jiffies)) - throtl_schedule_delayed_work(td->queue, 0); + throtl_schedule_delayed_work(td, 0); else - throtl_schedule_delayed_work(td->queue, - (st->min_disptime - jiffies)); + throtl_schedule_delayed_work(td, (st->min_disptime - jiffies)); } static inline void @@ -815,10 +819,10 @@ void blk_throtl_work(struct work_struct *work) } /* Call with queue lock held */ -void throtl_schedule_delayed_work(struct request_queue *q, unsigned long delay) +static void +throtl_schedule_delayed_work(struct throtl_data *td, unsigned long delay) { - struct throtl_data *td = q->td; struct delayed_work *dwork = &td->throtl_work; if (total_nr_queued(td) > 0) { @@ -827,12 +831,11 @@ void throtl_schedule_delayed_work(struct request_queue *q, unsigned long delay) * Cancel that and schedule a new one. */ __cancel_delayed_work(dwork); - kblockd_schedule_delayed_work(q, dwork, delay); + queue_delayed_work(kthrotld_workqueue, dwork, delay); throtl_log(td, "schedule work. delay=%lu jiffies=%lu", delay, jiffies); } } -EXPORT_SYMBOL(throtl_schedule_delayed_work); static void throtl_destroy_tg(struct throtl_data *td, struct throtl_grp *tg) @@ -920,7 +923,7 @@ static void throtl_update_blkio_group_read_bps(void *key, smp_mb__after_atomic_inc(); /* Schedule a work now to process the limit change */ - throtl_schedule_delayed_work(td->queue, 0); + throtl_schedule_delayed_work(td, 0); } static void throtl_update_blkio_group_write_bps(void *key, @@ -934,7 +937,7 @@ static void throtl_update_blkio_group_write_bps(void *key, smp_mb__before_atomic_inc(); atomic_inc(&td->limits_changed); smp_mb__after_atomic_inc(); - throtl_schedule_delayed_work(td->queue, 0); + throtl_schedule_delayed_work(td, 0); } static void throtl_update_blkio_group_read_iops(void *key, @@ -948,7 +951,7 @@ static void throtl_update_blkio_group_read_iops(void *key, smp_mb__before_atomic_inc(); atomic_inc(&td->limits_changed); smp_mb__after_atomic_inc(); - throtl_schedule_delayed_work(td->queue, 0); + throtl_schedule_delayed_work(td, 0); } static void throtl_update_blkio_group_write_iops(void *key, @@ -962,7 +965,7 @@ static void throtl_update_blkio_group_write_iops(void *key, smp_mb__before_atomic_inc(); atomic_inc(&td->limits_changed); smp_mb__after_atomic_inc(); - throtl_schedule_delayed_work(td->queue, 0); + throtl_schedule_delayed_work(td, 0); } void throtl_shutdown_timer_wq(struct request_queue *q) @@ -1135,6 +1138,10 @@ void blk_throtl_exit(struct request_queue *q) static int __init throtl_init(void) { + kthrotld_workqueue = alloc_workqueue("kthrotld", WQ_MEM_RECLAIM, 0); + if (!kthrotld_workqueue) + panic("Failed to create kthrotld\n"); + blkio_policy_register(&blkio_policy_throtl); return 0; } diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 4d18ff34670..dd8cd0f47e3 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1088,7 +1088,6 @@ static inline void put_dev_sector(Sector p) struct work_struct; int kblockd_schedule_work(struct request_queue *q, struct work_struct *work); -int kblockd_schedule_delayed_work(struct request_queue *q, struct delayed_work *dwork, unsigned long delay); #ifdef CONFIG_BLK_CGROUP /* @@ -1136,7 +1135,6 @@ static inline uint64_t rq_io_start_time_ns(struct request *req) extern int blk_throtl_init(struct request_queue *q); extern void blk_throtl_exit(struct request_queue *q); extern int blk_throtl_bio(struct request_queue *q, struct bio **bio); -extern void throtl_schedule_delayed_work(struct request_queue *q, unsigned long delay); extern void throtl_shutdown_timer_wq(struct request_queue *q); #else /* CONFIG_BLK_DEV_THROTTLING */ static inline int blk_throtl_bio(struct request_queue *q, struct bio **bio) @@ -1146,7 +1144,6 @@ static inline int blk_throtl_bio(struct request_queue *q, struct bio **bio) static inline int blk_throtl_init(struct request_queue *q) { return 0; } static inline int blk_throtl_exit(struct request_queue *q) { return 0; } -static inline void throtl_schedule_delayed_work(struct request_queue *q, unsigned long delay) {} static inline void throtl_shutdown_timer_wq(struct request_queue *q) {} #endif /* CONFIG_BLK_DEV_THROTTLING */ -- cgit v1.2.3-70-g09d2 From 291d24f6d9e7bbef81454fade8a44720665c7302 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 1 Mar 2011 13:45:24 -0500 Subject: block: fix kernel-doc format for blkdev_issue_zeroout Signed-off-by: Ben Hutchings Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- block/blk-lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index 1a320d2406b..eec78becb35 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -132,7 +132,7 @@ static void bio_batch_end_io(struct bio *bio, int err) } /** - * blkdev_issue_zeroout generate number of zero filed write bios + * blkdev_issue_zeroout - generate number of zero filed write bios * @bdev: blockdev to issue * @sector: start sector * @nr_sects: number of sectors to write -- cgit v1.2.3-70-g09d2 From 1654e7411a1ad4999fe7890ef51d2a2bbb1fcf76 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 2 Mar 2011 08:48:05 -0500 Subject: block: add @force_kblockd to __blk_run_queue() __blk_run_queue() automatically either calls q->request_fn() directly or schedules kblockd depending on whether the function is recursed. blk-flush implementation needs to be able to explicitly choose kblockd. Add @force_kblockd. All the current users are converted to specify %false for the parameter and this patch doesn't introduce any behavior change. stable: This is prerequisite for fixing ide oops caused by the new blk-flush implementation. Signed-off-by: Tejun Heo Cc: Jan Beulich Cc: James Bottomley Cc: stable@kernel.org Signed-off-by: Jens Axboe --- block/blk-core.c | 11 ++++++----- block/blk-flush.c | 2 +- block/cfq-iosched.c | 6 +++--- block/elevator.c | 4 ++-- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/scsi_transport_fc.c | 2 +- include/linux/blkdev.h | 2 +- 7 files changed, 15 insertions(+), 14 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 792ece27616..518dd423a5f 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -352,7 +352,7 @@ void blk_start_queue(struct request_queue *q) WARN_ON(!irqs_disabled()); queue_flag_clear(QUEUE_FLAG_STOPPED, q); - __blk_run_queue(q); + __blk_run_queue(q, false); } EXPORT_SYMBOL(blk_start_queue); @@ -403,13 +403,14 @@ EXPORT_SYMBOL(blk_sync_queue); /** * __blk_run_queue - run a single device queue * @q: The queue to run + * @force_kblockd: Don't run @q->request_fn directly. Use kblockd. * * Description: * See @blk_run_queue. This variant must be called with the queue lock * held and interrupts disabled. * */ -void __blk_run_queue(struct request_queue *q) +void __blk_run_queue(struct request_queue *q, bool force_kblockd) { blk_remove_plug(q); @@ -423,7 +424,7 @@ void __blk_run_queue(struct request_queue *q) * Only recurse once to avoid overrunning the stack, let the unplug * handling reinvoke the handler shortly if we already got there. */ - if (!queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) { + if (!force_kblockd && !queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) { q->request_fn(q); queue_flag_clear(QUEUE_FLAG_REENTER, q); } else { @@ -446,7 +447,7 @@ void blk_run_queue(struct request_queue *q) unsigned long flags; spin_lock_irqsave(q->queue_lock, flags); - __blk_run_queue(q); + __blk_run_queue(q, false); spin_unlock_irqrestore(q->queue_lock, flags); } EXPORT_SYMBOL(blk_run_queue); @@ -1053,7 +1054,7 @@ void blk_insert_request(struct request_queue *q, struct request *rq, drive_stat_acct(rq, 1); __elv_add_request(q, rq, where, 0); - __blk_run_queue(q); + __blk_run_queue(q, false); spin_unlock_irqrestore(q->queue_lock, flags); } EXPORT_SYMBOL(blk_insert_request); diff --git a/block/blk-flush.c b/block/blk-flush.c index 54b123d6563..56adaa8d55c 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -69,7 +69,7 @@ static void blk_flush_complete_seq_end_io(struct request_queue *q, * queue. Kick the queue in those cases. */ if (was_empty && next_rq) - __blk_run_queue(q); + __blk_run_queue(q, false); } static void pre_flush_end_io(struct request *rq, int error) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 7be4c795962..ea83a4f0c27 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -3355,7 +3355,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, cfqd->busy_queues > 1) { cfq_del_timer(cfqd, cfqq); cfq_clear_cfqq_wait_request(cfqq); - __blk_run_queue(cfqd->queue); + __blk_run_queue(cfqd->queue, false); } else { cfq_blkiocg_update_idle_time_stats( &cfqq->cfqg->blkg); @@ -3370,7 +3370,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, * this new queue is RT and the current one is BE */ cfq_preempt_queue(cfqd, cfqq); - __blk_run_queue(cfqd->queue); + __blk_run_queue(cfqd->queue, false); } } @@ -3731,7 +3731,7 @@ static void cfq_kick_queue(struct work_struct *work) struct request_queue *q = cfqd->queue; spin_lock_irq(q->queue_lock); - __blk_run_queue(cfqd->queue); + __blk_run_queue(cfqd->queue, false); spin_unlock_irq(q->queue_lock); } diff --git a/block/elevator.c b/block/elevator.c index 2569512830d..236e93c1f46 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -602,7 +602,7 @@ void elv_quiesce_start(struct request_queue *q) */ elv_drain_elevator(q); while (q->rq.elvpriv) { - __blk_run_queue(q); + __blk_run_queue(q, false); spin_unlock_irq(q->queue_lock); msleep(10); spin_lock_irq(q->queue_lock); @@ -651,7 +651,7 @@ void elv_insert(struct request_queue *q, struct request *rq, int where) * with anything. There's no point in delaying queue * processing. */ - __blk_run_queue(q); + __blk_run_queue(q, false); break; case ELEVATOR_INSERT_SORT: diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 9045c52abd2..fb2bb35c62c 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -443,7 +443,7 @@ static void scsi_run_queue(struct request_queue *q) &sdev->request_queue->queue_flags); if (flagset) queue_flag_set(QUEUE_FLAG_REENTER, sdev->request_queue); - __blk_run_queue(sdev->request_queue); + __blk_run_queue(sdev->request_queue, false); if (flagset) queue_flag_clear(QUEUE_FLAG_REENTER, sdev->request_queue); spin_unlock(sdev->request_queue->queue_lock); diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 998c01be323..5c3ccfc6b62 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3829,7 +3829,7 @@ fc_bsg_goose_queue(struct fc_rport *rport) !test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags); if (flagset) queue_flag_set(QUEUE_FLAG_REENTER, rport->rqst_q); - __blk_run_queue(rport->rqst_q); + __blk_run_queue(rport->rqst_q, false); if (flagset) queue_flag_clear(QUEUE_FLAG_REENTER, rport->rqst_q); spin_unlock_irqrestore(rport->rqst_q->queue_lock, flags); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index dd8cd0f47e3..d5063e1b555 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -699,7 +699,7 @@ extern void blk_start_queue(struct request_queue *q); extern void blk_stop_queue(struct request_queue *q); extern void blk_sync_queue(struct request_queue *q); extern void __blk_stop_queue(struct request_queue *q); -extern void __blk_run_queue(struct request_queue *); +extern void __blk_run_queue(struct request_queue *q, bool force_kblockd); extern void blk_run_queue(struct request_queue *); extern int blk_rq_map_user(struct request_queue *, struct request *, struct rq_map_data *, void __user *, unsigned long, -- cgit v1.2.3-70-g09d2 From 255bb490c8c27eed484d538efe6ef6a7473bd3f6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 2 Mar 2011 08:48:06 -0500 Subject: block: blk-flush shouldn't call directly into q->request_fn() __blk_run_queue() blk-flush decomposes a flush into sequence of multiple requests. On completion of a request, the next one is queued; however, block layer must not implicitly call into q->request_fn() directly from completion path. This makes the queue behave unexpectedly when seen from the drivers and violates the assumption that q->request_fn() is called with process context + queue_lock. This patch makes blk-flush the following two changes to make sure q->request_fn() is not called directly from request completion path. - blk_flush_complete_seq_end_io() now asks __blk_run_queue() to always use kblockd instead of calling directly into q->request_fn(). - queue_next_fseq() uses ELEVATOR_INSERT_REQUEUE instead of ELEVATOR_INSERT_FRONT so that elv_insert() doesn't try to unplug the request queue directly. Reported by Jan in the following threads. http://thread.gmane.org/gmane.linux.ide/48778 http://thread.gmane.org/gmane.linux.ide/48786 stable: applicable to v2.6.37. Signed-off-by: Tejun Heo Reported-by: Jan Beulich Cc: "David S. Miller" Cc: stable@kernel.org Signed-off-by: Jens Axboe --- block/blk-flush.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/block/blk-flush.c b/block/blk-flush.c index 56adaa8d55c..b27d0208611 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -66,10 +66,12 @@ static void blk_flush_complete_seq_end_io(struct request_queue *q, /* * Moving a request silently to empty queue_head may stall the - * queue. Kick the queue in those cases. + * queue. Kick the queue in those cases. This function is called + * from request completion path and calling directly into + * request_fn may confuse the driver. Always use kblockd. */ if (was_empty && next_rq) - __blk_run_queue(q, false); + __blk_run_queue(q, true); } static void pre_flush_end_io(struct request *rq, int error) @@ -130,7 +132,7 @@ static struct request *queue_next_fseq(struct request_queue *q) BUG(); } - elv_insert(q, rq, ELEVATOR_INSERT_FRONT); + elv_insert(q, rq, ELEVATOR_INSERT_REQUEUE); return rq; } -- cgit v1.2.3-70-g09d2 From 2d3a8497f8cc5aca14b722cd37d51f6c15ff9f74 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Thu, 3 Mar 2011 10:53:20 -0500 Subject: blktrace: Remove blk_fill_rwbs_rq. If we enable trace events to trace block actions, We use blk_fill_rwbs_rq to analyze the corresponding actions in request's cmd_flags, but we only choose the minor 2 bits from it, so most of other flags(e.g, REQ_SYNC) are missing. For example, with a sync write we get: write_test-2409 [001] 160.013869: block_rq_insert: 3,64 W 0 () 258135 + = 8 [write_test] Since now we have integrated the flags of both bio and request, it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and blk_fill_rwbs_rq isn't needed any more. With this patch, after a sync write we get: write_test-2417 [000] 226.603878: block_rq_insert: 3,64 WS 0 () 258135 += 8 [write_test] Signed-off-by: Tao Ma Acked-by: Jeff Moyer Signed-off-by: Jens Axboe --- include/linux/blktrace_api.h | 1 - include/trace/events/block.h | 6 +++--- kernel/trace/blktrace.c | 16 ---------------- 3 files changed, 3 insertions(+), 20 deletions(-) diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h index 3395cf7130f..b22fb0d3db0 100644 --- a/include/linux/blktrace_api.h +++ b/include/linux/blktrace_api.h @@ -245,7 +245,6 @@ static inline int blk_cmd_buf_len(struct request *rq) extern void blk_dump_cmd(char *buf, struct request *rq); extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes); -extern void blk_fill_rwbs_rq(char *rwbs, struct request *rq); #endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */ diff --git a/include/trace/events/block.h b/include/trace/events/block.h index aba421d68f6..78f18adb49c 100644 --- a/include/trace/events/block.h +++ b/include/trace/events/block.h @@ -31,7 +31,7 @@ DECLARE_EVENT_CLASS(block_rq_with_error, 0 : blk_rq_sectors(rq); __entry->errors = rq->errors; - blk_fill_rwbs_rq(__entry->rwbs, rq); + blk_fill_rwbs(__entry->rwbs, rq->cmd_flags, blk_rq_bytes(rq)); blk_dump_cmd(__get_str(cmd), rq); ), @@ -118,7 +118,7 @@ DECLARE_EVENT_CLASS(block_rq, __entry->bytes = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ? blk_rq_bytes(rq) : 0; - blk_fill_rwbs_rq(__entry->rwbs, rq); + blk_fill_rwbs(__entry->rwbs, rq->cmd_flags, blk_rq_bytes(rq)); blk_dump_cmd(__get_str(cmd), rq); memcpy(__entry->comm, current->comm, TASK_COMM_LEN); ), @@ -563,7 +563,7 @@ TRACE_EVENT(block_rq_remap, __entry->nr_sector = blk_rq_sectors(rq); __entry->old_dev = dev; __entry->old_sector = from; - blk_fill_rwbs_rq(__entry->rwbs, rq); + blk_fill_rwbs(__entry->rwbs, rq->cmd_flags, blk_rq_bytes(rq)); ), TP_printk("%d,%d %s %llu + %u <- (%d,%d) %llu", diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index d95721f3370..cbafed7d4f3 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -1827,21 +1827,5 @@ void blk_fill_rwbs(char *rwbs, u32 rw, int bytes) rwbs[i] = '\0'; } -void blk_fill_rwbs_rq(char *rwbs, struct request *rq) -{ - int rw = rq->cmd_flags & 0x03; - int bytes; - - if (rq->cmd_flags & REQ_DISCARD) - rw |= REQ_DISCARD; - - if (rq->cmd_flags & REQ_SECURE) - rw |= REQ_SECURE; - - bytes = blk_rq_bytes(rq); - - blk_fill_rwbs(rwbs, rw, bytes); -} - #endif /* CONFIG_EVENT_TRACING */ -- cgit v1.2.3-70-g09d2 From fd51469fb68b987032e46297e0a4fe9020063c20 Mon Sep 17 00:00:00 2001 From: Petr Uzel Date: Thu, 3 Mar 2011 11:48:50 -0500 Subject: block: kill loop_mutex Following steps lead to deadlock in kernel: dd if=/dev/zero of=img bs=512 count=1000 losetup -f img mkfs.ext2 /dev/loop0 mount -t ext2 -o loop /dev/loop0 mnt umount mnt/ Stacktrace: [] irq_exit+0x36/0x59 [] smp_apic_timer_interrupt+0x6b/0x75 [] apic_timer_interrupt+0x31/0x38 [] mutex_spin_on_owner+0x54/0x5b [] lo_release+0x12/0x67 [loop] [] __blkdev_put+0x7c/0x10c [] fput+0xd5/0x1aa [] loop_clr_fd+0x1a9/0x1b1 [loop] [] lo_release+0x39/0x67 [loop] [] __blkdev_put+0x7c/0x10c [] deactivate_locked_super+0x17/0x36 [] sys_umount+0x27e/0x2a5 [] sys_oldumount+0xb/0xe [] sysenter_do_call+0x12/0x26 [] 0xffffffff Regression since 2a48fc0ab24241755dc9, which introduced the private loop_mutex as part of the BKL removal process. As per [1], the mutex can be safely removed. [1] http://www.gossamer-threads.com/lists/linux/kernel/1341930 Addresses: https://bugzilla.novell.com/show_bug.cgi?id=669394 Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=29172 Signed-off-by: Petr Uzel Cc: stable@kernel.org Reviewed-by: Nikanth Karthikesan Acked-by: Arnd Bergmann Signed-off-by: Jens Axboe --- drivers/block/loop.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 49e6a545eb6..dbf31ec9114 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -78,7 +78,6 @@ #include -static DEFINE_MUTEX(loop_mutex); static LIST_HEAD(loop_devices); static DEFINE_MUTEX(loop_devices_mutex); @@ -1501,11 +1500,9 @@ static int lo_open(struct block_device *bdev, fmode_t mode) { struct loop_device *lo = bdev->bd_disk->private_data; - mutex_lock(&loop_mutex); mutex_lock(&lo->lo_ctl_mutex); lo->lo_refcnt++; mutex_unlock(&lo->lo_ctl_mutex); - mutex_unlock(&loop_mutex); return 0; } @@ -1515,7 +1512,6 @@ static int lo_release(struct gendisk *disk, fmode_t mode) struct loop_device *lo = disk->private_data; int err; - mutex_lock(&loop_mutex); mutex_lock(&lo->lo_ctl_mutex); if (--lo->lo_refcnt) @@ -1540,7 +1536,6 @@ static int lo_release(struct gendisk *disk, fmode_t mode) out: mutex_unlock(&lo->lo_ctl_mutex); out_unlocked: - mutex_unlock(&loop_mutex); return 0; } -- cgit v1.2.3-70-g09d2