From bbddff0545878a8649c091a9dd7c43ce91516734 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 18:22:48 +0200 Subject: percpu: use percpu allocator on UP too On UP, percpu allocations were redirected to kmalloc. This has the following problems. * For certain amount of allocations (determined by PERCPU_DYNAMIC_EARLY_SLOTS and PERCPU_DYNAMIC_EARLY_SIZE), percpu allocator can be used before the usual kernel memory allocator is brought online. On SMP, this is used to initialize the kernel memory allocator. * percpu allocator honors alignment upto PAGE_SIZE but kmalloc() doesn't. For example, workqueue makes use of larger alignments for cpu_workqueues. Currently, users of percpu allocators need to handle UP differently, which is somewhat fragile and ugly. Other than small amount of memory, there isn't much to lose by enabling percpu allocator on UP. It can simply use kernel memory based chunk allocation which was added for SMP archs w/o MMUs. This patch removes mm/percpu_up.c, builds mm/percpu.c on UP too and makes UP build use percpu-km. As percpu addresses and kernel addresses are always identity mapped and static percpu variables don't need any special treatment, nothing is arch dependent and mm/percpu.c implements generic setup_per_cpu_areas() for UP. Signed-off-by: Tejun Heo Reviewed-by: Christoph Lameter Acked-by: Pekka Enberg --- include/linux/percpu.h | 29 +++++------------------- mm/Kconfig | 8 +++++++ mm/Makefile | 7 +----- mm/percpu-km.c | 2 +- mm/percpu.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++---- mm/percpu_up.c | 30 ------------------------- 6 files changed, 71 insertions(+), 65 deletions(-) delete mode 100644 mm/percpu_up.c diff --git a/include/linux/percpu.h b/include/linux/percpu.h index fc8130a7cac..aeeeef1093c 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -39,8 +39,6 @@ preempt_enable(); \ } while (0) -#ifdef CONFIG_SMP - /* minimum unit size, also is the maximum supported allocation size */ #define PCPU_MIN_UNIT_SIZE PFN_ALIGN(32 << 10) @@ -137,37 +135,20 @@ extern int __init pcpu_page_first_chunk(size_t reserved_size, * dynamically allocated. Non-atomic access to the current CPU's * version should probably be combined with get_cpu()/put_cpu(). */ +#ifdef CONFIG_SMP #define per_cpu_ptr(ptr, cpu) SHIFT_PERCPU_PTR((ptr), per_cpu_offset((cpu))) +#else +#define per_cpu_ptr(ptr, cpu) ({ (void)(cpu); VERIFY_PERCPU_PTR((ptr)); }) +#endif extern void __percpu *__alloc_reserved_percpu(size_t size, size_t align); extern bool is_kernel_percpu_address(unsigned long addr); -#ifndef CONFIG_HAVE_SETUP_PER_CPU_AREA +#if !defined(CONFIG_SMP) || !defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) extern void __init setup_per_cpu_areas(void); #endif extern void __init percpu_init_late(void); -#else /* CONFIG_SMP */ - -#define per_cpu_ptr(ptr, cpu) ({ (void)(cpu); VERIFY_PERCPU_PTR((ptr)); }) - -/* can't distinguish from other static vars, always false */ -static inline bool is_kernel_percpu_address(unsigned long addr) -{ - return false; -} - -static inline void __init setup_per_cpu_areas(void) { } - -static inline void __init percpu_init_late(void) { } - -static inline void *pcpu_lpage_remapped(void *kaddr) -{ - return NULL; -} - -#endif /* CONFIG_SMP */ - extern void __percpu *__alloc_percpu(size_t size, size_t align); extern void free_percpu(void __percpu *__pdata); extern phys_addr_t per_cpu_ptr_to_phys(void *addr); diff --git a/mm/Kconfig b/mm/Kconfig index f4e516e9c37..01a57447a41 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -301,3 +301,11 @@ config NOMMU_INITIAL_TRIM_EXCESS of 1 says that all excess pages should be trimmed. See Documentation/nommu-mmap.txt for more information. + +# +# UP and nommu archs use km based percpu allocator +# +config NEED_PER_CPU_KM + depends on !SMP + bool + default y diff --git a/mm/Makefile b/mm/Makefile index 34b2546a9e3..f73f75a29f8 100644 --- a/mm/Makefile +++ b/mm/Makefile @@ -11,7 +11,7 @@ obj-y := bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \ maccess.o page_alloc.o page-writeback.o \ readahead.o swap.o truncate.o vmscan.o shmem.o \ prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \ - page_isolation.o mm_init.o mmu_context.o \ + page_isolation.o mm_init.o mmu_context.o percpu.o \ $(mmu-y) obj-y += init-mm.o @@ -36,11 +36,6 @@ obj-$(CONFIG_FAILSLAB) += failslab.o obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o obj-$(CONFIG_FS_XIP) += filemap_xip.o obj-$(CONFIG_MIGRATION) += migrate.o -ifdef CONFIG_SMP -obj-y += percpu.o -else -obj-y += percpu_up.o -endif obj-$(CONFIG_QUICKLIST) += quicklist.o obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o obj-$(CONFIG_MEMORY_FAILURE) += memory-failure.o diff --git a/mm/percpu-km.c b/mm/percpu-km.c index df680855540..7037bc73bfa 100644 --- a/mm/percpu-km.c +++ b/mm/percpu-km.c @@ -27,7 +27,7 @@ * chunk size is not aligned. percpu-km code will whine about it. */ -#ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK +#if defined(CONFIG_SMP) && defined(CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK) #error "contiguous percpu allocation is incompatible with paged first chunk" #endif diff --git a/mm/percpu.c b/mm/percpu.c index 58c572b18b0..fa70122dfdd 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -76,6 +76,7 @@ #define PCPU_SLOT_BASE_SHIFT 5 /* 1-31 shares the same slot */ #define PCPU_DFL_MAP_ALLOC 16 /* start a map with 16 ents */ +#ifdef CONFIG_SMP /* default addr <-> pcpu_ptr mapping, override in asm/percpu.h if necessary */ #ifndef __addr_to_pcpu_ptr #define __addr_to_pcpu_ptr(addr) \ @@ -89,6 +90,11 @@ (unsigned long)pcpu_base_addr - \ (unsigned long)__per_cpu_start) #endif +#else /* CONFIG_SMP */ +/* on UP, it's always identity mapped */ +#define __addr_to_pcpu_ptr(addr) (void __percpu *)(addr) +#define __pcpu_ptr_to_addr(ptr) (void __force *)(ptr) +#endif /* CONFIG_SMP */ struct pcpu_chunk { struct list_head list; /* linked to pcpu_slot lists */ @@ -949,6 +955,7 @@ EXPORT_SYMBOL_GPL(free_percpu); */ bool is_kernel_percpu_address(unsigned long addr) { +#ifdef CONFIG_SMP const size_t static_size = __per_cpu_end - __per_cpu_start; void __percpu *base = __addr_to_pcpu_ptr(pcpu_base_addr); unsigned int cpu; @@ -959,6 +966,8 @@ bool is_kernel_percpu_address(unsigned long addr) if ((void *)addr >= start && (void *)addr < start + static_size) return true; } +#endif + /* on UP, can't distinguish from other static vars, always false */ return false; } @@ -1066,6 +1075,8 @@ void __init pcpu_free_alloc_info(struct pcpu_alloc_info *ai) free_bootmem(__pa(ai), ai->__ai_size); } +#if defined(CONFIG_SMP) && (defined(CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK) || \ + defined(CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK)) /** * pcpu_build_alloc_info - build alloc_info considering distances between CPUs * @reserved_size: the size of reserved percpu area in bytes @@ -1220,6 +1231,8 @@ static struct pcpu_alloc_info * __init pcpu_build_alloc_info( return ai; } +#endif /* CONFIG_SMP && (CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK || + CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK) */ /** * pcpu_dump_alloc_info - print out information about pcpu_alloc_info @@ -1363,7 +1376,9 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, /* sanity checks */ PCPU_SETUP_BUG_ON(ai->nr_groups <= 0); +#ifdef CONFIG_SMP PCPU_SETUP_BUG_ON(!ai->static_size); +#endif PCPU_SETUP_BUG_ON(!base_addr); PCPU_SETUP_BUG_ON(ai->unit_size < size_sum); PCPU_SETUP_BUG_ON(ai->unit_size & ~PAGE_MASK); @@ -1488,6 +1503,8 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, return 0; } +#ifdef CONFIG_SMP + const char *pcpu_fc_names[PCPU_FC_NR] __initdata = { [PCPU_FC_AUTO] = "auto", [PCPU_FC_EMBED] = "embed", @@ -1758,8 +1775,9 @@ out_free_ar: } #endif /* CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK */ +#ifndef CONFIG_HAVE_SETUP_PER_CPU_AREA /* - * Generic percpu area setup. + * Generic SMP percpu area setup. * * The embedding helper is used because its behavior closely resembles * the original non-dynamic generic percpu area setup. This is @@ -1770,7 +1788,6 @@ out_free_ar: * on the physical linear memory mapping which uses large page * mappings on applicable archs. */ -#ifndef CONFIG_HAVE_SETUP_PER_CPU_AREA unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; EXPORT_SYMBOL(__per_cpu_offset); @@ -1799,13 +1816,48 @@ void __init setup_per_cpu_areas(void) PERCPU_DYNAMIC_RESERVE, PAGE_SIZE, NULL, pcpu_dfl_fc_alloc, pcpu_dfl_fc_free); if (rc < 0) - panic("Failed to initialized percpu areas."); + panic("Failed to initialize percpu areas."); delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; for_each_possible_cpu(cpu) __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu]; } -#endif /* CONFIG_HAVE_SETUP_PER_CPU_AREA */ +#endif /* CONFIG_HAVE_SETUP_PER_CPU_AREA */ + +#else /* CONFIG_SMP */ + +/* + * UP percpu area setup. + * + * UP always uses km-based percpu allocator with identity mapping. + * Static percpu variables are indistinguishable from the usual static + * variables and don't require any special preparation. + */ +void __init setup_per_cpu_areas(void) +{ + const size_t unit_size = + roundup_pow_of_two(max_t(size_t, PCPU_MIN_UNIT_SIZE, + PERCPU_DYNAMIC_RESERVE)); + struct pcpu_alloc_info *ai; + void *fc; + + ai = pcpu_alloc_alloc_info(1, 1); + fc = __alloc_bootmem(unit_size, PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); + if (!ai || !fc) + panic("Failed to allocate memory for percpu areas."); + + ai->dyn_size = unit_size; + ai->unit_size = unit_size; + ai->atom_size = unit_size; + ai->alloc_size = unit_size; + ai->groups[0].nr_units = 1; + ai->groups[0].cpu_map[0] = 0; + + if (pcpu_setup_first_chunk(ai, fc) < 0) + panic("Failed to initialize percpu areas."); +} + +#endif /* CONFIG_SMP */ /* * First and reserved chunks are initialized with temporary allocation diff --git a/mm/percpu_up.c b/mm/percpu_up.c deleted file mode 100644 index db884fae572..00000000000 --- a/mm/percpu_up.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * mm/percpu_up.c - dummy percpu memory allocator implementation for UP - */ - -#include -#include -#include - -void __percpu *__alloc_percpu(size_t size, size_t align) -{ - /* - * Can't easily make larger alignment work with kmalloc. WARN - * on it. Larger alignment should only be used for module - * percpu sections on SMP for which this path isn't used. - */ - WARN_ON_ONCE(align > SMP_CACHE_BYTES); - return (void __percpu __force *)kzalloc(size, GFP_KERNEL); -} -EXPORT_SYMBOL_GPL(__alloc_percpu); - -void free_percpu(void __percpu *p) -{ - kfree(this_cpu_ptr(p)); -} -EXPORT_SYMBOL_GPL(free_percpu); - -phys_addr_t per_cpu_ptr_to_phys(void *addr) -{ - return __pa(addr); -} -- cgit v1.2.3-70-g09d2