From c09c4e006590210001ced90d59e62182bfd396f9 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 21 May 2007 18:09:30 +0800 Subject: Blackfin arch: make sure we use local labels Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Linus Torvalds --- arch/blackfin/mach-bf537/head.S | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index b4377dddc12..2c2652bee7e 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -470,38 +470,38 @@ ENTRY(_bfin_reset) SSYNC; #if defined(CONFIG_MTD_M25P80) -/* - * The following code fix the SPI flash reboot issue, - * /CS signal of the chip which is using PF10 return to GPIO mode - */ + /* + * The following code fix the SPI flash reboot issue, + * /CS signal of the chip which is using PF10 return to GPIO mode + */ p0.h = hi(PORTF_FER); p0.l = lo(PORTF_FER); r0.l = 0x0000; w[p0] = r0.l; SSYNC; -/* /CS return to high */ + /* /CS return to high */ p0.h = hi(PORTFIO); p0.l = lo(PORTFIO); r0.l = 0xFFFF; w[p0] = r0.l; SSYNC; -/* Delay some time, This is necessary */ + /* Delay some time, This is necessary */ r1.h = 0; r1.l = 0x400; p1 = r1; - lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1; -_delay_lab1: + lsetup (.L_delay_lab1, .L_delay_lab1_end) lc1 = p1; +.L_delay_lab1: r0.h = 0; r0.l = 0x8000; p0 = r0; - lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0; -_delay_lab0: + lsetup (.L_delay_lab0, .L_delay_lab0_end) lc0 = p0; +.L_delay_lab0: nop; -_delay_lab0_end: +.L_delay_lab0_end: nop; -_delay_lab1_end: +.L_delay_lab1_end: nop; #endif -- cgit v1.2.3-70-g09d2