From 68e41c5d032668e2905404afbef75bc58be179d6 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:06:06 -0800 Subject: xhci: Avoid BUG() in interrupt context Change the BUGs in xhci_find_new_dequeue_state() to WARN_ONs, to avoid bringing down the box if one of them is hit This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 3e8211c1ce5..2a87231d588 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -474,8 +474,11 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_deq_seg = find_trb_seg(cur_td->start_seg, dev->eps[ep_index].stopped_trb, &state->new_cycle_state); - if (!state->new_deq_seg) - BUG(); + if (!state->new_deq_seg) { + WARN_ON(1); + return; + } + /* Dig out the cycle state saved by the xHC during the stop ep cmd */ xhci_dbg(xhci, "Finding endpoint context\n"); ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); @@ -486,8 +489,10 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_deq_seg = find_trb_seg(state->new_deq_seg, state->new_deq_ptr, &state->new_cycle_state); - if (!state->new_deq_seg) - BUG(); + if (!state->new_deq_seg) { + WARN_ON(1); + return; + } trb = &state->new_deq_ptr->generic; if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) && -- cgit v1.2.3-70-g09d2 From a2490187011cc2263117626615a581927d19f1d3 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:06:44 -0800 Subject: xhci: Clarify some expressions in the TRB math This makes it easier to spot some problems, which will be fixed by the next patch in the series. Also change dev_dbg to dev_err in check_trb_math(), so any math errors will be visible even when running with debug disabled. Note: This patch changes the expressions containing "((1 << TRB_MAX_BUFF_SHIFT) - 1)" to use the equivalent "(TRB_MAX_BUFF_SIZE - 1)". No change in behavior is intended for those expressions. This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 2a87231d588..1071411d6df 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2368,7 +2368,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) /* Scatter gather list entries may cross 64KB boundaries */ running_total = TRB_MAX_BUFF_SIZE - - (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); if (running_total != 0) num_trbs++; @@ -2399,11 +2399,11 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) static void check_trb_math(struct urb *urb, int num_trbs, int running_total) { if (num_trbs != 0) - dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " + dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " "TRBs, %d left\n", __func__, urb->ep->desc.bEndpointAddress, num_trbs); if (running_total != urb->transfer_buffer_length) - dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " + dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " "queued %#x (%d), asked for %#x (%d)\n", __func__, urb->ep->desc.bEndpointAddress, @@ -2538,8 +2538,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, sg = urb->sg; addr = (u64) sg_dma_address(sg); this_sg_len = sg_dma_len(sg); - trb_buff_len = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); trb_buff_len = min_t(int, trb_buff_len, this_sg_len); if (trb_buff_len > urb->transfer_buffer_length) trb_buff_len = urb->transfer_buffer_length; @@ -2577,7 +2576,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), (unsigned int) addr + trb_buff_len); if (TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) { + (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) { xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n"); xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n", (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), @@ -2621,7 +2620,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } trb_buff_len = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (addr & (TRB_MAX_BUFF_SIZE - 1)); trb_buff_len = min_t(int, trb_buff_len, this_sg_len); if (running_total + trb_buff_len > urb->transfer_buffer_length) trb_buff_len = @@ -2661,7 +2660,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs = 0; /* How much data is (potentially) left before the 64KB boundary? */ running_total = TRB_MAX_BUFF_SIZE - - (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); /* If there's some data on this 64KB chunk, or we have to send a * zero-length transfer, we need at least one TRB @@ -2705,8 +2704,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* How much data is in the first TRB? */ addr = (u64) urb->transfer_dma; trb_buff_len = TRB_MAX_BUFF_SIZE - - (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); - if (urb->transfer_buffer_length < trb_buff_len) + (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); + if (trb_buff_len > urb->transfer_buffer_length) trb_buff_len = urb->transfer_buffer_length; first_trb = true; @@ -2884,8 +2883,7 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci, addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset); td_len = urb->iso_frame_desc[i].length; - running_total = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); if (running_total != 0) num_trbs++; -- cgit v1.2.3-70-g09d2 From 5807795bd4dececdf553719cc02869e633395787 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:07:20 -0800 Subject: xhci: Fix errors in the running total calculations in the TRB math Calculations like running_total = TRB_MAX_BUFF_SIZE - (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); if (running_total != 0) num_trbs++; are incorrect, because running_total can never be zero, so the if() expression will never be true. I think the intention was that running_total be in the range of 0 to TRB_MAX_BUFF_SIZE-1, not 1 to TRB_MAX_BUFF_SIZE. So adding a running_total &= TRB_MAX_BUFF_SIZE - 1; fixes the problem. This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1071411d6df..dbbeec96ce1 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2369,6 +2369,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) /* Scatter gather list entries may cross 64KB boundaries */ running_total = TRB_MAX_BUFF_SIZE - (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; if (running_total != 0) num_trbs++; @@ -2661,6 +2662,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* How much data is (potentially) left before the 64KB boundary? */ running_total = TRB_MAX_BUFF_SIZE - (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; /* If there's some data on this 64KB chunk, or we have to send a * zero-length transfer, we need at least one TRB @@ -2884,6 +2886,7 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci, td_len = urb->iso_frame_desc[i].length; running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; if (running_total != 0) num_trbs++; -- cgit v1.2.3-70-g09d2 From bcd2fde05341cef0052e49566ec88b406a521cf3 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:07:57 -0800 Subject: xhci: Fix an error in count_sg_trbs_needed() The expression while (running_total < sg_dma_len(sg)) does not take into account that the remaining data length can be less than sg_dma_len(sg). In that case, running_total can end up being greater than the total data length, so an extra TRB is counted. Changing the expression to while (running_total < sg_dma_len(sg) && running_total < temp) fixes that. This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index dbbeec96ce1..3289bf4832c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2374,7 +2374,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) num_trbs++; /* How many more 64KB chunks to transfer, how many more TRBs? */ - while (running_total < sg_dma_len(sg)) { + while (running_total < sg_dma_len(sg) && running_total < temp) { num_trbs++; running_total += TRB_MAX_BUFF_SIZE; } -- cgit v1.2.3-70-g09d2 From 07194ab7be63a972096309ab0ea747df455c6a20 Mon Sep 17 00:00:00 2001 From: Luben Tuikov Date: Fri, 11 Feb 2011 11:33:10 -0800 Subject: USB: Reset USB 3.0 devices on (re)discovery If the device isn't reset, the XHCI HCD sends SET ADDRESS to address 0 while the device is already in Addressed state, and the request is dropped on the floor as it is addressed to the default address. This sequence of events, which this patch fixes looks like this: usb_reset_and_verify_device() hub_port_init() hub_set_address() SET_ADDRESS to 0 with 1 usb_get_device_descriptor(udev, 8) usb_get_device_descriptor(udev, 18) descriptors_changed() --> goto re_enumerate: hub_port_logical_disconnect() kick_khubd() And then: hub_events() hub_port_connect_change() usb_disconnect() usb_disable_device() new device struct sets device state to Powered choose_address() hub_port_init() <-- no reset, but SET ADDRESS to 0 with 1, timeout! The solution is to always reset the device in hub_port_init() to put it in a known state. Note from Sarah Sharp: This patch should be queued for stable trees all the way back to 2.6.34, since that was the first kernel that supported configured device reset. The code this patch touches has been there since 2.6.32, but the bug would never be hit before 2.6.34 because the xHCI driver would completely reject an attempt to reset a configured device under xHCI. Signed-off-by: Luben Tuikov Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/core/hub.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d041c6826e4..0f299b7aad6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2681,17 +2681,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - if (!udev->config && oldspeed == USB_SPEED_SUPER) { - /* Don't reset USB 3.0 devices during an initial setup */ - usb_set_device_state(udev, USB_STATE_DEFAULT); - } else { - /* Reset the device; full speed may morph to high speed */ - /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ - retval = hub_port_reset(hub, port1, udev, delay); - if (retval < 0) /* error or disconnect */ - goto fail; - /* success, speed is known */ - } + /* Reset the device; full speed may morph to high speed */ + /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ + retval = hub_port_reset(hub, port1, udev, delay); + if (retval < 0) /* error or disconnect */ + goto fail; + /* success, speed is known */ + retval = -ENODEV; if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) { -- cgit v1.2.3-70-g09d2 From 09ece30e06b19994e6f3d260e5c4be18dce22714 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 8 Feb 2011 16:29:33 -0800 Subject: USB: xhci: rework xhci_print_ir_set() to get ir set from xhci itself xhci->ir_set points to __iomem region, but xhci_print_ir_set accepts plain struct xhci_intr_reg * causing multiple sparse warning at call sites and inside the fucntion when we try to read that memory. Instead of adding __iomem qualifier to the argument let's rework the function so it itself gets needed register set from xhci and prints it. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-dbg.c | 5 +++-- drivers/usb/host/xhci-mem.c | 2 +- drivers/usb/host/xhci.c | 6 +++--- drivers/usb/host/xhci.h | 2 +- 4 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index fcbf4abbf38..582937e2132 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -169,9 +169,10 @@ static void xhci_print_ports(struct xhci_hcd *xhci) } } -void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num) +void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num) { - void *addr; + struct xhci_intr_reg __iomem *ir_set = &xhci->run_regs->ir_set[set_num]; + void __iomem *addr; u32 temp; u64 temp_64; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 1d0f45f0e7a..c10ee8b6008 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1961,7 +1961,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) /* Set the event ring dequeue address */ xhci_set_hc_event_deq(xhci); xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n"); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); /* * XXX: Might need to set the Interrupter Moderation Register to diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 34cf4e16587..9784880df58 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -473,7 +473,7 @@ int xhci_run(struct usb_hcd *hcd) xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp)); xhci_writel(xhci, ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); if (NUM_TEST_NOOPS > 0) doorbell = xhci_setup_one_noop(xhci); @@ -528,7 +528,7 @@ void xhci_stop(struct usb_hcd *hcd) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_writel(xhci, ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); @@ -755,7 +755,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_writel(xhci, ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7f236fd2201..7f127df6dd5 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1348,7 +1348,7 @@ static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci) } /* xHCI debugging */ -void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num); +void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num); void xhci_print_registers(struct xhci_hcd *xhci); void xhci_dbg_regs(struct xhci_hcd *xhci); void xhci_print_run_regs(struct xhci_hcd *xhci); -- cgit v1.2.3-70-g09d2 From c50a00f8feba42c5bccff47e052e4cb0c95dcd2b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 8 Feb 2011 16:29:34 -0800 Subject: USB: xhci: fix couple sparse annotations There is no point in casting to (void *) when setting up xhci->ir_set as it only makes us lose __iomem annotation and makes sparse unhappy. OTOH we do need to cast to (void *) when calculating xhci->dba from offset, but since it is IO memory we need to annotate it as such. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-mem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index c10ee8b6008..dbb8bcd3919 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1900,11 +1900,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) val &= DBOFF_MASK; xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x" " from cap regs base addr\n", val); - xhci->dba = (void *) xhci->cap_regs + val; + xhci->dba = (void __iomem *) xhci->cap_regs + val; xhci_dbg_regs(xhci); xhci_print_run_regs(xhci); /* Set ir_set to interrupt register set 0 */ - xhci->ir_set = (void *) xhci->run_regs->ir_set; + xhci->ir_set = &xhci->run_regs->ir_set[0]; /* * Event ring setup: Allocate a normal ring, but also setup -- cgit v1.2.3-70-g09d2 From 8212a49d1c1e53ad2bc3176b983a2483b48fd989 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 8 Feb 2011 13:55:59 -0800 Subject: USB: xhci: mark local functions as static Functions that are not used outsde of the module they are defined should be marked as static. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-dbg.c | 4 ++-- drivers/usb/host/xhci-mem.c | 4 ++-- drivers/usb/host/xhci.c | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 582937e2132..0231814a97a 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -450,7 +450,7 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci, } } -void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) +static void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { /* Fields are 32 bits wide, DMA addresses are in bytes */ int field_size = 32 / 8; @@ -489,7 +489,7 @@ void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) dbg_rsvd64(xhci, (u64 *)slot_ctx, dma); } -void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, +static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep) { diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index dbb8bcd3919..a9534396e85 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -307,7 +307,7 @@ struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, /***************** Streams structures manipulation *************************/ -void xhci_free_stream_ctx(struct xhci_hcd *xhci, +static void xhci_free_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, struct xhci_stream_ctx *stream_ctx, dma_addr_t dma) { @@ -335,7 +335,7 @@ void xhci_free_stream_ctx(struct xhci_hcd *xhci, * The stream context array must be a power of 2, and can be as small as * 64 bytes or as large as 1MB. */ -struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, +static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, dma_addr_t *dma, gfp_t mem_flags) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 9784880df58..2083fc2179b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -109,7 +109,7 @@ int xhci_halt(struct xhci_hcd *xhci) /* * Set the run bit and wait for the host to be running. */ -int xhci_start(struct xhci_hcd *xhci) +static int xhci_start(struct xhci_hcd *xhci) { u32 temp; int ret; @@ -329,7 +329,7 @@ int xhci_init(struct usb_hcd *hcd) #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING -void xhci_event_ring_work(unsigned long arg) +static void xhci_event_ring_work(unsigned long arg) { unsigned long flags; int temp; @@ -857,7 +857,7 @@ unsigned int xhci_last_valid_endpoint(u32 added_ctxs) /* Returns 1 if the arguments are OK; * returns 0 this is a root hub; returns -EINVAL for NULL pointers. */ -int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, +static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev, const char *func) { struct xhci_hcd *xhci; @@ -1693,7 +1693,7 @@ static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci, xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags)); } -void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, +static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state) { -- cgit v1.2.3-70-g09d2 From ec95d35a6bd0047f05fe8a21e6c52f8bb418da55 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 24 Feb 2011 10:36:53 +0200 Subject: usb: musb: core: set has_tt flag MUSB is a non-standard host implementation which can handle all speeds with the same core. We need to set has_tt flag after commit d199c96d41d80a567493e12b8e96ea056a1350c1 (USB: prevent buggy hubs from crashing the USB stack) in order for MUSB HCD to continue working. Signed-off-by: Felipe Balbi Cc: stable Cc: Alan Stern Tested-by: Michael Jones Tested-by: Alexander Holler Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 54a8bd1047d..c292d5c499e 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1864,6 +1864,7 @@ allocate_instance(struct device *dev, INIT_LIST_HEAD(&musb->out_bulk); hcd->uses_new_polling = 1; + hcd->has_tt = 1; musb->vbuserr_retry = VBUSERR_RETRY_COUNT; musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON; -- cgit v1.2.3-70-g09d2