From c7c06d8a95fd6b83d9f71a0cfecd3f91945d17e5 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 26 May 2010 03:00:59 -0400 Subject: backlight: adp8860: add support for ADP8861 & ADP8863 Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Richard Purdie --- drivers/video/backlight/Kconfig | 6 ++-- drivers/video/backlight/adp8860_bl.c | 58 +++++++++++++++++++++++++----------- include/linux/i2c/adp8860.h | 17 +++++++++++ 3 files changed, 61 insertions(+), 20 deletions(-) diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 2d805218296..39ecaf71c1f 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -275,13 +275,13 @@ config BACKLIGHT_ADP5520 be called adp5520_bl. config BACKLIGHT_ADP8860 - tristate "Backlight Driver for ADP8860 using WLED" + tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED" depends on BACKLIGHT_CLASS_DEVICE && I2C select NEW_LEDS select LEDS_CLASS help - If you have a LCD backlight connected to the ADP8860, - say Y here to enable this driver. + If you have a LCD backlight connected to the ADP8860, ADP8861 or + ADP8863 say Y here to enable this driver. To compile this driver as a module, choose M here: the module will be called adp8860_bl. diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c index 99d14ed8857..921ca37398f 100644 --- a/drivers/video/backlight/adp8860_bl.c +++ b/drivers/video/backlight/adp8860_bl.c @@ -62,7 +62,9 @@ #define ADP8860_PH2LEVH 0x24 /* Second phototransistor ambient light level-high byte register */ #define ADP8860_MANUFID 0x0 /* Analog Devices ADP8860 Manufacturer ID */ -#define ADP8860_DEVICEID 0x7 /* Analog Devices ADP8860 Device ID */ +#define ADP8861_MANUFID 0x4 /* Analog Devices ADP8861 Manufacturer ID */ +#define ADP8863_MANUFID 0x2 /* Analog Devices ADP8863 Manufacturer ID */ + #define ADP8860_DEVID(x) ((x) & 0xF) #define ADP8860_MANID(x) ((x) >> 4) @@ -70,6 +72,7 @@ #define INT_CFG (1 << 6) #define NSTBY (1 << 5) #define DIM_EN (1 << 4) +#define GDWN_DIS (1 << 3) #define SIS_EN (1 << 2) #define CMP_AUTOEN (1 << 1) #define BLEN (1 << 0) @@ -86,6 +89,12 @@ #define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1)) #define ALS_CCFG_VAL(filt) ((0x7 & filt) << 5) +enum { + adp8860, + adp8861, + adp8863 +}; + struct adp8860_led { struct led_classdev cdev; struct work_struct work; @@ -105,6 +114,8 @@ struct adp8860_bl { int id; int revid; int current_brightness; + unsigned en_ambl_sens:1; + unsigned gdwn_dis:1; }; static int adp8860_read(struct i2c_client *client, int reg, uint8_t *val) @@ -121,7 +132,6 @@ static int adp8860_read(struct i2c_client *client, int reg, uint8_t *val) return 0; } - static int adp8860_write(struct i2c_client *client, u8 reg, u8 val) { return i2c_smbus_write_byte_data(client, reg, val); @@ -321,7 +331,7 @@ static int adp8860_bl_set(struct backlight_device *bl, int brightness) struct i2c_client *client = data->client; int ret = 0; - if (data->pdata->en_ambl_sens) { + if (data->en_ambl_sens) { if ((brightness > 0) && (brightness < ADP8860_MAX_BRIGHTNESS)) { /* Disable Ambient Light auto adjust */ ret |= adp8860_clr_bits(client, ADP8860_MDCR, @@ -388,7 +398,7 @@ static int adp8860_bl_setup(struct backlight_device *bl) ret |= adp8860_write(client, ADP8860_BLMX1, pdata->l1_daylight_max); ret |= adp8860_write(client, ADP8860_BLDM1, pdata->l1_daylight_dim); - if (pdata->en_ambl_sens) { + if (data->en_ambl_sens) { data->cached_daylight_max = pdata->l1_daylight_max; ret |= adp8860_write(client, ADP8860_BLMX2, pdata->l2_office_max); @@ -413,7 +423,8 @@ static int adp8860_bl_setup(struct backlight_device *bl) ret |= adp8860_write(client, ADP8860_BLFR, FADE_VAL(pdata->bl_fade_in, pdata->bl_fade_out)); - ret |= adp8860_set_bits(client, ADP8860_MDCR, BLEN | DIM_EN | NSTBY); + ret |= adp8860_set_bits(client, ADP8860_MDCR, BLEN | DIM_EN | NSTBY | + (data->gdwn_dis ? GDWN_DIS : 0)); return ret; } @@ -663,19 +674,29 @@ static int __devinit adp8860_probe(struct i2c_client *client, return -EINVAL; } + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + ret = adp8860_read(client, ADP8860_MFDVID, ®_val); if (ret < 0) - return -EIO; + goto out2; - if (ADP8860_MANID(reg_val) != ADP8860_MANUFID) { + switch (ADP8860_MANID(reg_val)) { + case ADP8863_MANUFID: + data->gdwn_dis = !!pdata->gdwn_dis; + case ADP8860_MANUFID: + data->en_ambl_sens = !!pdata->en_ambl_sens; + break; + case ADP8861_MANUFID: + data->gdwn_dis = !!pdata->gdwn_dis; + break; + default: dev_err(&client->dev, "failed to probe\n"); - return -ENODEV; + ret = -ENODEV; + goto out2; } - data = kzalloc(sizeof(*data), GFP_KERNEL); - if (data == NULL) - return -ENOMEM; - /* It's confirmed that the DEVID field is actually a REVID */ data->revid = ADP8860_DEVID(reg_val); @@ -703,7 +724,7 @@ static int __devinit adp8860_probe(struct i2c_client *client, data->bl = bl; - if (pdata->en_ambl_sens) + if (data->en_ambl_sens) ret = sysfs_create_group(&bl->dev.kobj, &adp8860_bl_attr_group); @@ -720,7 +741,8 @@ static int __devinit adp8860_probe(struct i2c_client *client, backlight_update_status(bl); - dev_info(&client->dev, "Rev.%d Backlight\n", data->revid); + dev_info(&client->dev, "%s Rev.%d Backlight\n", + client->name, data->revid); if (pdata->num_leds) adp8860_led_probe(client); @@ -728,7 +750,7 @@ static int __devinit adp8860_probe(struct i2c_client *client, return 0; out: - if (data->pdata->en_ambl_sens) + if (data->en_ambl_sens) sysfs_remove_group(&data->bl->dev.kobj, &adp8860_bl_attr_group); out1: @@ -749,7 +771,7 @@ static int __devexit adp8860_remove(struct i2c_client *client) if (data->led) adp8860_led_remove(client); - if (data->pdata->en_ambl_sens) + if (data->en_ambl_sens) sysfs_remove_group(&data->bl->dev.kobj, &adp8860_bl_attr_group); @@ -780,7 +802,9 @@ static int adp8860_i2c_resume(struct i2c_client *client) #endif static const struct i2c_device_id adp8860_id[] = { - { "adp8860", 0 }, + { "adp8860", adp8860 }, + { "adp8861", adp8861 }, + { "adp8863", adp8863 }, { } }; MODULE_DEVICE_TABLE(i2c, adp8860_id); diff --git a/include/linux/i2c/adp8860.h b/include/linux/i2c/adp8860.h index 115514b7176..0b4d39855c9 100644 --- a/include/linux/i2c/adp8860.h +++ b/include/linux/i2c/adp8860.h @@ -132,6 +132,23 @@ struct adp8860_backlight_platform_data { u8 led_fade_out; /* LED Fade-Out Timer */ u8 led_fade_law; /* fade-on/fade-off transfer characteristic */ u8 led_on_time; + + /** + * Gain down disable. Setting this option does not allow the + * charge pump to switch to lower gains. NOT AVAILABLE on ADP8860 + * 1 = the charge pump doesn't switch down in gain until all LEDs are 0. + * The charge pump switches up in gain as needed. This feature is + * useful if the ADP8863 charge pump is used to drive an external load. + * This feature must be used when utilizing small fly capacitors + * (0402 or smaller). + * 0 = the charge pump automatically switches up and down in gain. + * This provides optimal efficiency, but is not suitable for driving + * loads that are not connected through the ADP8863 diode drivers. + * Additionally, the charge pump fly capacitors should be low ESR + * and sized 0603 or greater. + */ + + u8 gdwn_dis; }; #endif /* __LINUX_I2C_ADP8860_H */ -- cgit v1.2.3-70-g09d2