From 08d1f2155cd5b21bb3848f46d9747afb1ccd249d Mon Sep 17 00:00:00 2001 From: Andy Green Date: Tue, 10 Jul 2007 19:29:37 +0200 Subject: [PATCH] mac80211: Monitor mode radiotap injection docs Add monitor mode radiotap injection docs. Signed-off-by: Andy Green Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- Documentation/networking/mac80211-injection.txt | 59 +++++++++++++++++ Documentation/networking/radiotap-headers.txt | 87 +++++++++++++++++++++++++ 2 files changed, 146 insertions(+) create mode 100644 Documentation/networking/mac80211-injection.txt create mode 100644 Documentation/networking/radiotap-headers.txt diff --git a/Documentation/networking/mac80211-injection.txt b/Documentation/networking/mac80211-injection.txt new file mode 100644 index 00000000000..53ef7a06f49 --- /dev/null +++ b/Documentation/networking/mac80211-injection.txt @@ -0,0 +1,59 @@ +How to use packet injection with mac80211 +========================================= + +mac80211 now allows arbitrary packets to be injected down any Monitor Mode +interface from userland. The packet you inject needs to be composed in the +following format: + + [ radiotap header ] + [ ieee80211 header ] + [ payload ] + +The radiotap format is discussed in +./Documentation/networking/radiotap-headers.txt. + +Despite 13 radiotap argument types are currently defined, most only make sense +to appear on received packets. Currently three kinds of argument are used by +the injection code, although it knows to skip any other arguments that are +present (facilitating replay of captured radiotap headers directly): + + - IEEE80211_RADIOTAP_RATE - u8 arg in 500kbps units (0x02 --> 1Mbps) + + - IEEE80211_RADIOTAP_ANTENNA - u8 arg, 0x00 = ant1, 0x01 = ant2 + + - IEEE80211_RADIOTAP_DBM_TX_POWER - u8 arg, dBm + +Here is an example valid radiotap header defining these three parameters + + 0x00, 0x00, // <-- radiotap version + 0x0b, 0x00, // <- radiotap header length + 0x04, 0x0c, 0x00, 0x00, // <-- bitmap + 0x6c, // <-- rate + 0x0c, //<-- tx power + 0x01 //<-- antenna + +The ieee80211 header follows immediately afterwards, looking for example like +this: + + 0x08, 0x01, 0x00, 0x00, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x13, 0x22, 0x33, 0x44, 0x55, 0x66, + 0x13, 0x22, 0x33, 0x44, 0x55, 0x66, + 0x10, 0x86 + +Then lastly there is the payload. + +After composing the packet contents, it is sent by send()-ing it to a logical +mac80211 interface that is in Monitor mode. Libpcap can also be used, +(which is easier than doing the work to bind the socket to the right +interface), along the following lines: + + ppcap = pcap_open_live(szInterfaceName, 800, 1, 20, szErrbuf); +... + r = pcap_inject(ppcap, u8aSendBuffer, nLength); + +You can also find sources for a complete inject test applet here: + +http://penumbra.warmcat.com/_twk/tiki-index.php?page=packetspammer + +Andy Green diff --git a/Documentation/networking/radiotap-headers.txt b/Documentation/networking/radiotap-headers.txt new file mode 100644 index 00000000000..e29e027d9be --- /dev/null +++ b/Documentation/networking/radiotap-headers.txt @@ -0,0 +1,87 @@ +How to use radiotap headers +=========================== + +Pointer to the radiotap include file +------------------------------------ + +Radiotap headers are variable-length and extensible, you can get most of the +information you need to know on them from: + +./include/net/ieee80211_radiotap.h + +This document gives an overview and warns on some corner cases. + + +Structure of the header +----------------------- + +There is a fixed portion at the start which contains a u32 bitmap that defines +if the possible argument associated with that bit is present or not. So if b0 +of the it_present member of ieee80211_radiotap_header is set, it means that +the header for argument index 0 (IEEE80211_RADIOTAP_TSFT) is present in the +argument area. + + < 8-byte ieee80211_radiotap_header > + [ ] + [ ... ] + +At the moment there are only 13 possible argument indexes defined, but in case +we run out of space in the u32 it_present member, it is defined that b31 set +indicates that there is another u32 bitmap following (shown as "possible +argument bitmap extensions..." above), and the start of the arguments is moved +forward 4 bytes each time. + +Note also that the it_len member __le16 is set to the total number of bytes +covered by the ieee80211_radiotap_header and any arguments following. + + +Requirements for arguments +-------------------------- + +After the fixed part of the header, the arguments follow for each argument +index whose matching bit is set in the it_present member of +ieee80211_radiotap_header. + + - the arguments are all stored little-endian! + + - the argument payload for a given argument index has a fixed size. So + IEEE80211_RADIOTAP_TSFT being present always indicates an 8-byte argument is + present. See the comments in ./include/net/ieee80211_radiotap.h for a nice + breakdown of all the argument sizes + + - the arguments must be aligned to a boundary of the argument size using + padding. So a u16 argument must start on the next u16 boundary if it isn't + already on one, a u32 must start on the next u32 boundary and so on. + + - "alignment" is relative to the start of the ieee80211_radiotap_header, ie, + the first byte of the radiotap header. The absolute alignment of that first + byte isn't defined. So even if the whole radiotap header is starting at, eg, + address 0x00000003, still the first byte of the radiotap header is treated as + 0 for alignment purposes. + + - the above point that there may be no absolute alignment for multibyte + entities in the fixed radiotap header or the argument region means that you + have to take special evasive action when trying to access these multibyte + entities. Some arches like Blackfin cannot deal with an attempt to + dereference, eg, a u16 pointer that is pointing to an odd address. Instead + you have to use a kernel API get_unaligned() to dereference the pointer, + which will do it bytewise on the arches that require that. + + - The arguments for a given argument index can be a compound of multiple types + together. For example IEEE80211_RADIOTAP_CHANNEL has an argument payload + consisting of two u16s of total length 4. When this happens, the padding + rule is applied dealing with a u16, NOT dealing with a 4-byte single entity. + + +Example valid radiotap header +----------------------------- + + 0x00, 0x00, // <-- radiotap version + pad byte + 0x0b, 0x00, // <- radiotap header length + 0x04, 0x0c, 0x00, 0x00, // <-- bitmap + 0x6c, // <-- rate (in 500kHz units) + 0x0c, //<-- tx power + 0x01 //<-- antenna + + +Andy Green -- cgit v1.2.3-70-g09d2 From 179f831bc33104d14deb54a52b7a8b43433f8ccc Mon Sep 17 00:00:00 2001 From: Andy Green Date: Tue, 10 Jul 2007 19:29:38 +0200 Subject: [PATCH] cfg80211: Radiotap parser Generic code to walk through the fields in a radiotap header, accounting for nasties like extended "field present" bitfields and alignment rules Signed-off-by: Andy Green Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- Documentation/networking/radiotap-headers.txt | 65 +++++++ include/net/cfg80211.h | 38 ++++ net/wireless/Makefile | 2 +- net/wireless/radiotap.c | 257 ++++++++++++++++++++++++++ 4 files changed, 361 insertions(+), 1 deletion(-) create mode 100644 net/wireless/radiotap.c diff --git a/Documentation/networking/radiotap-headers.txt b/Documentation/networking/radiotap-headers.txt index e29e027d9be..953331c7984 100644 --- a/Documentation/networking/radiotap-headers.txt +++ b/Documentation/networking/radiotap-headers.txt @@ -84,4 +84,69 @@ Example valid radiotap header 0x01 //<-- antenna +Using the Radiotap Parser +------------------------- + +If you are having to parse a radiotap struct, you can radically simplify the +job by using the radiotap parser that lives in net/wireless/radiotap.c and has +its prototypes available in include/net/cfg80211.h. You use it like this: + +#include + +/* buf points to the start of the radiotap header part */ + +int MyFunction(u8 * buf, int buflen) +{ + int pkt_rate_100kHz = 0, antenna = 0, pwr = 0; + struct ieee80211_radiotap_iterator iterator; + int ret = ieee80211_radiotap_iterator_init(&iterator, buf, buflen); + + while (!ret) { + + ret = ieee80211_radiotap_iterator_next(&iterator); + + if (ret) + continue; + + /* see if this argument is something we can use */ + + switch (iterator.this_arg_index) { + /* + * You must take care when dereferencing iterator.this_arg + * for multibyte types... the pointer is not aligned. Use + * get_unaligned((type *)iterator.this_arg) to dereference + * iterator.this_arg for type "type" safely on all arches. + */ + case IEEE80211_RADIOTAP_RATE: + /* radiotap "rate" u8 is in + * 500kbps units, eg, 0x02=1Mbps + */ + pkt_rate_100kHz = (*iterator.this_arg) * 5; + break; + + case IEEE80211_RADIOTAP_ANTENNA: + /* radiotap uses 0 for 1st ant */ + antenna = *iterator.this_arg); + break; + + case IEEE80211_RADIOTAP_DBM_TX_POWER: + pwr = *iterator.this_arg; + break; + + default: + break; + } + } /* while more rt headers */ + + if (ret != -ENOENT) + return TXRX_DROP; + + /* discard the radiotap header part */ + buf += iterator.max_length; + buflen -= iterator.max_length; + + ... + +} + Andy Green diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 88171f8ce58..7edaef6b29d 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -11,6 +11,44 @@ * Copyright 2006 Johannes Berg */ + +/* Radiotap header iteration + * implemented in net/wireless/radiotap.c + * docs in Documentation/networking/radiotap-headers.txt + */ +/** + * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args + * @rtheader: pointer to the radiotap header we are walking through + * @max_length: length of radiotap header in cpu byte ordering + * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg + * @this_arg: pointer to current radiotap arg + * @arg_index: internal next argument index + * @arg: internal next argument pointer + * @next_bitmap: internal pointer to next present u32 + * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present + */ + +struct ieee80211_radiotap_iterator { + struct ieee80211_radiotap_header *rtheader; + int max_length; + int this_arg_index; + u8 *this_arg; + + int arg_index; + u8 *arg; + __le32 *next_bitmap; + u32 bitmap_shifter; +}; + +extern int ieee80211_radiotap_iterator_init( + struct ieee80211_radiotap_iterator *iterator, + struct ieee80211_radiotap_header *radiotap_header, + int max_length); + +extern int ieee80211_radiotap_iterator_next( + struct ieee80211_radiotap_iterator *iterator); + + /* from net/wireless.h */ struct wiphy; diff --git a/net/wireless/Makefile b/net/wireless/Makefile index 3a96ae60271..092116e390b 100644 --- a/net/wireless/Makefile +++ b/net/wireless/Makefile @@ -1,4 +1,4 @@ obj-$(CONFIG_WIRELESS_EXT) += wext.o obj-$(CONFIG_CFG80211) += cfg80211.o -cfg80211-y += core.o sysfs.o +cfg80211-y += core.o sysfs.o radiotap.o diff --git a/net/wireless/radiotap.c b/net/wireless/radiotap.c new file mode 100644 index 00000000000..68c11d09991 --- /dev/null +++ b/net/wireless/radiotap.c @@ -0,0 +1,257 @@ +/* + * Radiotap parser + * + * Copyright 2007 Andy Green + */ + +#include +#include +#include + +/* function prototypes and related defs are in include/net/cfg80211.h */ + +/** + * ieee80211_radiotap_iterator_init - radiotap parser iterator initialization + * @iterator: radiotap_iterator to initialize + * @radiotap_header: radiotap header to parse + * @max_length: total length we can parse into (eg, whole packet length) + * + * Returns: 0 or a negative error code if there is a problem. + * + * This function initializes an opaque iterator struct which can then + * be passed to ieee80211_radiotap_iterator_next() to visit every radiotap + * argument which is present in the header. It knows about extended + * present headers and handles them. + * + * How to use: + * call __ieee80211_radiotap_iterator_init() to init a semi-opaque iterator + * struct ieee80211_radiotap_iterator (no need to init the struct beforehand) + * checking for a good 0 return code. Then loop calling + * __ieee80211_radiotap_iterator_next()... it returns either 0, + * -ENOENT if there are no more args to parse, or -EINVAL if there is a problem. + * The iterator's @this_arg member points to the start of the argument + * associated with the current argument index that is present, which can be + * found in the iterator's @this_arg_index member. This arg index corresponds + * to the IEEE80211_RADIOTAP_... defines. + * + * Radiotap header length: + * You can find the CPU-endian total radiotap header length in + * iterator->max_length after executing ieee80211_radiotap_iterator_init() + * successfully. + * + * Alignment Gotcha: + * You must take care when dereferencing iterator.this_arg + * for multibyte types... the pointer is not aligned. Use + * get_unaligned((type *)iterator.this_arg) to dereference + * iterator.this_arg for type "type" safely on all arches. + * + * Example code: + * See Documentation/networking/radiotap-headers.txt + */ + +int ieee80211_radiotap_iterator_init( + struct ieee80211_radiotap_iterator *iterator, + struct ieee80211_radiotap_header *radiotap_header, + int max_length) +{ + /* Linux only supports version 0 radiotap format */ + if (radiotap_header->it_version) + return -EINVAL; + + /* sanity check for allowed length and radiotap length field */ + if (max_length < le16_to_cpu(get_unaligned(&radiotap_header->it_len))) + return -EINVAL; + + iterator->rtheader = radiotap_header; + iterator->max_length = le16_to_cpu(get_unaligned( + &radiotap_header->it_len)); + iterator->arg_index = 0; + iterator->bitmap_shifter = le32_to_cpu(get_unaligned( + &radiotap_header->it_present)); + iterator->arg = (u8 *)radiotap_header + sizeof(*radiotap_header); + iterator->this_arg = NULL; + + /* find payload start allowing for extended bitmap(s) */ + + if (unlikely(iterator->bitmap_shifter & (1<arg)) & + (1<arg += sizeof(u32); + + /* + * check for insanity where the present bitmaps + * keep claiming to extend up to or even beyond the + * stated radiotap header length + */ + + if (((ulong)iterator->arg - + (ulong)iterator->rtheader) > iterator->max_length) + return -EINVAL; + } + + iterator->arg += sizeof(u32); + + /* + * no need to check again for blowing past stated radiotap + * header length, because ieee80211_radiotap_iterator_next + * checks it before it is dereferenced + */ + } + + /* we are all initialized happily */ + + return 0; +} +EXPORT_SYMBOL(ieee80211_radiotap_iterator_init); + + +/** + * ieee80211_radiotap_iterator_next - return next radiotap parser iterator arg + * @iterator: radiotap_iterator to move to next arg (if any) + * + * Returns: 0 if there is an argument to handle, + * -ENOENT if there are no more args or -EINVAL + * if there is something else wrong. + * + * This function provides the next radiotap arg index (IEEE80211_RADIOTAP_*) + * in @this_arg_index and sets @this_arg to point to the + * payload for the field. It takes care of alignment handling and extended + * present fields. @this_arg can be changed by the caller (eg, + * incremented to move inside a compound argument like + * IEEE80211_RADIOTAP_CHANNEL). The args pointed to are in + * little-endian format whatever the endianess of your CPU. + * + * Alignment Gotcha: + * You must take care when dereferencing iterator.this_arg + * for multibyte types... the pointer is not aligned. Use + * get_unaligned((type *)iterator.this_arg) to dereference + * iterator.this_arg for type "type" safely on all arches. + */ + +int ieee80211_radiotap_iterator_next( + struct ieee80211_radiotap_iterator *iterator) +{ + + /* + * small length lookup table for all radiotap types we heard of + * starting from b0 in the bitmap, so we can walk the payload + * area of the radiotap header + * + * There is a requirement to pad args, so that args + * of a given length must begin at a boundary of that length + * -- but note that compound args are allowed (eg, 2 x u16 + * for IEEE80211_RADIOTAP_CHANNEL) so total arg length is not + * a reliable indicator of alignment requirement. + * + * upper nybble: content alignment for arg + * lower nybble: content length for arg + */ + + static const u8 rt_sizes[] = { + [IEEE80211_RADIOTAP_TSFT] = 0x88, + [IEEE80211_RADIOTAP_FLAGS] = 0x11, + [IEEE80211_RADIOTAP_RATE] = 0x11, + [IEEE80211_RADIOTAP_CHANNEL] = 0x24, + [IEEE80211_RADIOTAP_FHSS] = 0x22, + [IEEE80211_RADIOTAP_DBM_ANTSIGNAL] = 0x11, + [IEEE80211_RADIOTAP_DBM_ANTNOISE] = 0x11, + [IEEE80211_RADIOTAP_LOCK_QUALITY] = 0x22, + [IEEE80211_RADIOTAP_TX_ATTENUATION] = 0x22, + [IEEE80211_RADIOTAP_DB_TX_ATTENUATION] = 0x22, + [IEEE80211_RADIOTAP_DBM_TX_POWER] = 0x11, + [IEEE80211_RADIOTAP_ANTENNA] = 0x11, + [IEEE80211_RADIOTAP_DB_ANTSIGNAL] = 0x11, + [IEEE80211_RADIOTAP_DB_ANTNOISE] = 0x11 + /* + * add more here as they are defined in + * include/net/ieee80211_radiotap.h + */ + }; + + /* + * for every radiotap entry we can at + * least skip (by knowing the length)... + */ + + while (iterator->arg_index < sizeof(rt_sizes)) { + int hit = 0; + int pad; + + if (!(iterator->bitmap_shifter & 1)) + goto next_entry; /* arg not present */ + + /* + * arg is present, account for alignment padding + * 8-bit args can be at any alignment + * 16-bit args must start on 16-bit boundary + * 32-bit args must start on 32-bit boundary + * 64-bit args must start on 64-bit boundary + * + * note that total arg size can differ from alignment of + * elements inside arg, so we use upper nybble of length + * table to base alignment on + * + * also note: these alignments are ** relative to the + * start of the radiotap header **. There is no guarantee + * that the radiotap header itself is aligned on any + * kind of boundary. + * + * the above is why get_unaligned() is used to dereference + * multibyte elements from the radiotap area + */ + + pad = (((ulong)iterator->arg) - + ((ulong)iterator->rtheader)) & + ((rt_sizes[iterator->arg_index] >> 4) - 1); + + if (pad) + iterator->arg += + (rt_sizes[iterator->arg_index] >> 4) - pad; + + /* + * this is what we will return to user, but we need to + * move on first so next call has something fresh to test + */ + iterator->this_arg_index = iterator->arg_index; + iterator->this_arg = iterator->arg; + hit = 1; + + /* internally move on the size of this arg */ + iterator->arg += rt_sizes[iterator->arg_index] & 0x0f; + + /* + * check for insanity where we are given a bitmap that + * claims to have more arg content than the length of the + * radiotap section. We will normally end up equalling this + * max_length on the last arg, never exceeding it. + */ + + if (((ulong)iterator->arg - (ulong)iterator->rtheader) > + iterator->max_length) + return -EINVAL; + + next_entry: + iterator->arg_index++; + if (unlikely((iterator->arg_index & 31) == 0)) { + /* completed current u32 bitmap */ + if (iterator->bitmap_shifter & 1) { + /* b31 was set, there is more */ + /* move to next u32 bitmap */ + iterator->bitmap_shifter = le32_to_cpu( + get_unaligned(iterator->next_bitmap)); + iterator->next_bitmap++; + } else + /* no more bitmaps: end */ + iterator->arg_index = sizeof(rt_sizes); + } else /* just try the next bit */ + iterator->bitmap_shifter >>= 1; + + /* if we found a valid arg earlier, return it now */ + if (hit) + return 0; + } + + /* we don't know how to handle any more args, we're done */ + return -ENOENT; +} +EXPORT_SYMBOL(ieee80211_radiotap_iterator_next); -- cgit v1.2.3-70-g09d2 From e4c967c6d88ca94365dd8e2a7bbd22eedb8d7ae7 Mon Sep 17 00:00:00 2001 From: Andy Green Date: Tue, 10 Jul 2007 19:32:07 +0200 Subject: [PATCH] mac80211: Monitor mode radiotap-based packet injection Signed-off-by: Andy Green Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/ieee80211.c | 234 +++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 224 insertions(+), 10 deletions(-) diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 4e84f24fd43..8b57eaa2a27 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "ieee80211_common.h" #include "ieee80211_i.h" @@ -1118,7 +1119,138 @@ ieee80211_tx_h_ps_buf(struct ieee80211_txrx_data *tx) } -static void inline +/* + * deal with packet injection down monitor interface + * with Radiotap Header -- only called for monitor mode interface + */ + +static ieee80211_txrx_result +__ieee80211_parse_tx_radiotap( + struct ieee80211_txrx_data *tx, + struct sk_buff *skb, struct ieee80211_tx_control *control) +{ + /* + * this is the moment to interpret and discard the radiotap header that + * must be at the start of the packet injected in Monitor mode + * + * Need to take some care with endian-ness since radiotap + * args are little-endian + */ + + struct ieee80211_radiotap_iterator iterator; + struct ieee80211_radiotap_header *rthdr = + (struct ieee80211_radiotap_header *) skb->data; + struct ieee80211_hw_mode *mode = tx->local->hw.conf.mode; + int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len); + + /* + * default control situation for all injected packets + * FIXME: this does not suit all usage cases, expand to allow control + */ + + control->retry_limit = 1; /* no retry */ + control->key_idx = -1; /* no encryption key */ + control->flags &= ~(IEEE80211_TXCTL_USE_RTS_CTS | + IEEE80211_TXCTL_USE_CTS_PROTECT); + control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT | + IEEE80211_TXCTL_NO_ACK; + control->antenna_sel_tx = 0; /* default to default antenna */ + + /* + * for every radiotap entry that is present + * (ieee80211_radiotap_iterator_next returns -ENOENT when no more + * entries present, or -EINVAL on error) + */ + + while (!ret) { + int i, target_rate; + + ret = ieee80211_radiotap_iterator_next(&iterator); + + if (ret) + continue; + + /* see if this argument is something we can use */ + switch (iterator.this_arg_index) { + /* + * You must take care when dereferencing iterator.this_arg + * for multibyte types... the pointer is not aligned. Use + * get_unaligned((type *)iterator.this_arg) to dereference + * iterator.this_arg for type "type" safely on all arches. + */ + case IEEE80211_RADIOTAP_RATE: + /* + * radiotap rate u8 is in 500kbps units eg, 0x02=1Mbps + * ieee80211 rate int is in 100kbps units eg, 0x0a=1Mbps + */ + target_rate = (*iterator.this_arg) * 5; + for (i = 0; i < mode->num_rates; i++) { + struct ieee80211_rate *r = &mode->rates[i]; + + if (r->rate > target_rate) + continue; + + control->rate = r; + + if (r->flags & IEEE80211_RATE_PREAMBLE2) + control->tx_rate = r->val2; + else + control->tx_rate = r->val; + + /* end on exact match */ + if (r->rate == target_rate) + i = mode->num_rates; + } + break; + + case IEEE80211_RADIOTAP_ANTENNA: + /* + * radiotap uses 0 for 1st ant, mac80211 is 1 for + * 1st ant + */ + control->antenna_sel_tx = (*iterator.this_arg) + 1; + break; + + case IEEE80211_RADIOTAP_DBM_TX_POWER: + control->power_level = *iterator.this_arg; + break; + + case IEEE80211_RADIOTAP_FLAGS: + if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) { + /* + * this indicates that the skb we have been + * handed has the 32-bit FCS CRC at the end... + * we should react to that by snipping it off + * because it will be recomputed and added + * on transmission + */ + if (skb->len < (iterator.max_length + FCS_LEN)) + return TXRX_DROP; + + skb_trim(skb, skb->len - FCS_LEN); + } + break; + + default: + break; + } + } + + if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */ + return TXRX_DROP; + + /* + * remove the radiotap header + * iterator->max_length was sanity-checked against + * skb->len by iterator init + */ + skb_pull(skb, iterator.max_length); + + return TXRX_CONTINUE; +} + + +static ieee80211_txrx_result inline __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx, struct sk_buff *skb, struct net_device *dev, @@ -1126,6 +1258,9 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx, { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_sub_if_data *sdata; + ieee80211_txrx_result res = TXRX_CONTINUE; + int hdrlen; memset(tx, 0, sizeof(*tx)); @@ -1135,7 +1270,32 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx, tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev); tx->sta = sta_info_get(local, hdr->addr1); tx->fc = le16_to_cpu(hdr->frame_control); + + /* + * set defaults for things that can be set by + * injected radiotap headers + */ control->power_level = local->hw.conf.power_level; + control->antenna_sel_tx = local->hw.conf.antenna_sel_tx; + if (local->sta_antenna_sel != STA_ANTENNA_SEL_AUTO && tx->sta) + control->antenna_sel_tx = tx->sta->antenna_sel_tx; + + /* process and remove the injection radiotap header */ + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (unlikely(sdata->type == IEEE80211_IF_TYPE_MNTR)) { + if (__ieee80211_parse_tx_radiotap(tx, skb, control) == + TXRX_DROP) { + return TXRX_DROP; + } + /* + * we removed the radiotap header after this point, + * we filled control with what we could use + * set to the actual ieee header now + */ + hdr = (struct ieee80211_hdr *) skb->data; + res = TXRX_QUEUED; /* indication it was monitor packet */ + } + tx->u.tx.control = control; tx->u.tx.unicast = !is_multicast_ether_addr(hdr->addr1); if (is_multicast_ether_addr(hdr->addr1)) @@ -1152,9 +1312,6 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx, control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK; tx->sta->clear_dst_mask = 0; } - control->antenna_sel_tx = local->hw.conf.antenna_sel_tx; - if (local->sta_antenna_sel != STA_ANTENNA_SEL_AUTO && tx->sta) - control->antenna_sel_tx = tx->sta->antenna_sel_tx; hdrlen = ieee80211_get_hdrlen(tx->fc); if (skb->len > hdrlen + sizeof(rfc1042_header) + 2) { u8 *pos = &skb->data[hdrlen + sizeof(rfc1042_header)]; @@ -1162,6 +1319,7 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx, } control->flags |= IEEE80211_TXCTL_FIRST_FRAGMENT; + return res; } static int inline is_ieee80211_device(struct net_device *dev, @@ -1274,7 +1432,7 @@ static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb, struct sta_info *sta; ieee80211_tx_handler *handler; struct ieee80211_txrx_data tx; - ieee80211_txrx_result res = TXRX_DROP; + ieee80211_txrx_result res = TXRX_DROP, res_prepare; int ret, i; WARN_ON(__ieee80211_queue_pending(local, control->queue)); @@ -1284,15 +1442,26 @@ static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb, return 0; } - __ieee80211_tx_prepare(&tx, skb, dev, control); + res_prepare = __ieee80211_tx_prepare(&tx, skb, dev, control); + + if (res_prepare == TXRX_DROP) { + dev_kfree_skb(skb); + return 0; + } + sta = tx.sta; tx.u.tx.mgmt_interface = mgmt; tx.u.tx.mode = local->hw.conf.mode; - for (handler = local->tx_handlers; *handler != NULL; handler++) { - res = (*handler)(&tx); - if (res != TXRX_CONTINUE) - break; + if (res_prepare == TXRX_QUEUED) { /* if it was an injected packet */ + res = TXRX_CONTINUE; + } else { + for (handler = local->tx_handlers; *handler != NULL; + handler++) { + res = (*handler)(&tx); + if (res != TXRX_CONTINUE) + break; + } } skb = tx.skb; /* handlers are allowed to change skb */ @@ -1531,6 +1700,51 @@ static int ieee80211_subif_start_xmit(struct sk_buff *skb, goto fail; } + if (unlikely(sdata->type == IEEE80211_IF_TYPE_MNTR)) { + struct ieee80211_radiotap_header *prthdr = + (struct ieee80211_radiotap_header *)skb->data; + u16 len; + + /* + * there must be a radiotap header at the + * start in this case + */ + if (unlikely(prthdr->it_version)) { + /* only version 0 is supported */ + ret = 0; + goto fail; + } + + skb->dev = local->mdev; + + pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; + memset(pkt_data, 0, sizeof(*pkt_data)); + pkt_data->ifindex = sdata->dev->ifindex; + pkt_data->mgmt_iface = 0; + pkt_data->do_not_encrypt = 1; + + /* above needed because we set skb device to master */ + + /* + * fix up the pointers accounting for the radiotap + * header still being in there. We are being given + * a precooked IEEE80211 header so no need for + * normal processing + */ + len = le16_to_cpu(get_unaligned(&prthdr->it_len)); + skb_set_mac_header(skb, len); + skb_set_network_header(skb, len + sizeof(hdr)); + skb_set_transport_header(skb, len + sizeof(hdr)); + + /* + * pass the radiotap header up to + * the next stage intact + */ + dev_queue_xmit(skb); + + return 0; + } + nh_pos = skb_network_header(skb) - skb->data; h_pos = skb_transport_header(skb) - skb->data; -- cgit v1.2.3-70-g09d2 From b306f45300866adc01b84f7aa083bfcd9cbb89c4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jul 2007 19:32:08 +0200 Subject: [PATCH] mac80211: show transmitted frames on monitor interfaces This patch makes mac80211 show transmitted frames on monitor interfaces, including radiotap headers that indicate some transmission parameters. The shown parameters will need to be expanded, but this should work as a basis to work from. Signed-off-by: Johannes Berg Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/ieee80211.c | 140 +++++++++++++++++++++++++++++++++++++-------- net/mac80211/ieee80211_i.h | 1 + 2 files changed, 118 insertions(+), 23 deletions(-) diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 8b57eaa2a27..85f23fd866a 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -57,6 +57,17 @@ static const unsigned char eapol_header[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00, 0x88, 0x8e }; +/* + * For seeing transmitted packets on monitor interfaces + * we have a radiotap header too. + */ +struct ieee80211_tx_status_rtap_hdr { + struct ieee80211_radiotap_header hdr; + __le16 tx_flags; + u8 data_retries; +} __attribute__ ((packed)); + + static inline void ieee80211_include_sequence(struct ieee80211_sub_if_data *sdata, struct ieee80211_hdr *hdr) { @@ -529,7 +540,7 @@ ieee80211_tx_h_fragment(struct ieee80211_txrx_data *tx) /* reserve enough extra head and tail room for possible * encryption */ frag = frags[i] = - dev_alloc_skb(tx->local->hw.extra_tx_headroom + + dev_alloc_skb(tx->local->tx_headroom + frag_threshold + IEEE80211_ENCRYPT_HEADROOM + IEEE80211_ENCRYPT_TAILROOM); @@ -538,8 +549,8 @@ ieee80211_tx_h_fragment(struct ieee80211_txrx_data *tx) /* Make sure that all fragments use the same priority so * that they end up using the same TX queue */ frag->priority = first->priority; - skb_reserve(frag, tx->local->hw.extra_tx_headroom + - IEEE80211_ENCRYPT_HEADROOM); + skb_reserve(frag, tx->local->tx_headroom + + IEEE80211_ENCRYPT_HEADROOM); fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen); memcpy(fhdr, first->data, hdrlen); if (i == num_fragm - 2) @@ -1636,8 +1647,7 @@ static int ieee80211_master_start_xmit(struct sk_buff *skb, } osdata = IEEE80211_DEV_TO_SUB_IF(odev); - headroom = osdata->local->hw.extra_tx_headroom + - IEEE80211_ENCRYPT_HEADROOM; + headroom = osdata->local->tx_headroom + IEEE80211_ENCRYPT_HEADROOM; if (skb_headroom(skb) < headroom) { if (pskb_expand_head(skb, headroom, 0, GFP_ATOMIC)) { dev_kfree_skb(skb); @@ -1833,7 +1843,7 @@ static int ieee80211_subif_start_xmit(struct sk_buff *skb, * build in headroom in __dev_alloc_skb() (linux/skbuff.h) and * alloc_skb() (net/core/skbuff.c) */ - head_need = hdrlen + encaps_len + local->hw.extra_tx_headroom; + head_need = hdrlen + encaps_len + local->tx_headroom; head_need -= skb_headroom(skb); /* We are going to modify skb data, so make a copy of it if happens to @@ -1920,9 +1930,9 @@ ieee80211_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } - if (skb_headroom(skb) < sdata->local->hw.extra_tx_headroom) { - if (pskb_expand_head(skb, - sdata->local->hw.extra_tx_headroom, 0, GFP_ATOMIC)) { + if (skb_headroom(skb) < sdata->local->tx_headroom) { + if (pskb_expand_head(skb, sdata->local->tx_headroom, + 0, GFP_ATOMIC)) { dev_kfree_skb(skb); return 0; } @@ -2061,12 +2071,12 @@ struct sk_buff * ieee80211_beacon_get(struct ieee80211_hw *hw, int if_id, bh_len = ap->beacon_head_len; bt_len = ap->beacon_tail_len; - skb = dev_alloc_skb(local->hw.extra_tx_headroom + + skb = dev_alloc_skb(local->tx_headroom + bh_len + bt_len + 256 /* maximum TIM len */); if (!skb) return NULL; - skb_reserve(skb, local->hw.extra_tx_headroom); + skb_reserve(skb, local->tx_headroom); memcpy(skb_put(skb, bh_len), b_head, bh_len); ieee80211_include_sequence(sdata, (struct ieee80211_hdr *)skb->data); @@ -4498,6 +4508,9 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_local *local = hw_to_local(hw); u16 frag, type; u32 msg_type; + struct ieee80211_tx_status_rtap_hdr *rthdr; + struct ieee80211_sub_if_data *sdata; + int monitors; if (!status) { printk(KERN_ERR @@ -4609,27 +4622,100 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, local->dot11FailedCount++; } - if (!(status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS) - || unlikely(!local->apdev)) { + msg_type = (status->flags & IEEE80211_TX_STATUS_ACK) ? + ieee80211_msg_tx_callback_ack : ieee80211_msg_tx_callback_fail; + + /* this was a transmitted frame, but now we want to reuse it */ + skb_orphan(skb); + + if ((status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS) && + local->apdev) { + if (local->monitors) { + skb2 = skb_clone(skb, GFP_ATOMIC); + } else { + skb2 = skb; + skb = NULL; + } + + if (skb2) + /* Send frame to hostapd */ + ieee80211_rx_mgmt(local, skb2, NULL, msg_type); + + if (!skb) + return; + } + + if (!local->monitors) { dev_kfree_skb(skb); return; } - msg_type = (status->flags & IEEE80211_TX_STATUS_ACK) ? - ieee80211_msg_tx_callback_ack : ieee80211_msg_tx_callback_fail; + /* send frame to monitor interfaces now */ - /* skb was the original skb used for TX. Clone it and give the clone - * to netif_rx(). Free original skb. */ - skb2 = skb_copy(skb, GFP_ATOMIC); - if (!skb2) { + if (skb_headroom(skb) < sizeof(*rthdr)) { + printk(KERN_ERR "ieee80211_tx_status: headroom too small\n"); dev_kfree_skb(skb); return; } - dev_kfree_skb(skb); - skb = skb2; - /* Send frame to hostapd */ - ieee80211_rx_mgmt(local, skb, NULL, msg_type); + rthdr = (struct ieee80211_tx_status_rtap_hdr*) + skb_push(skb, sizeof(*rthdr)); + + memset(rthdr, 0, sizeof(*rthdr)); + rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr)); + rthdr->hdr.it_present = + cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) | + (1 << IEEE80211_RADIOTAP_DATA_RETRIES)); + + if (!(status->flags & IEEE80211_TX_STATUS_ACK) && + !is_multicast_ether_addr(hdr->addr1)) + rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL); + + if ((status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) && + (status->control.flags & IEEE80211_TXCTL_USE_CTS_PROTECT)) + rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS); + else if (status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) + rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS); + + rthdr->data_retries = status->retry_count; + + read_lock(&local->sub_if_lock); + monitors = local->monitors; + list_for_each_entry(sdata, &local->sub_if_list, list) { + /* + * Using the monitors counter is possibly racy, but + * if the value is wrong we simply either clone the skb + * once too much or forget sending it to one monitor iface + * The latter case isn't nice but fixing the race is much + * more complicated. + */ + if (!monitors || !skb) + goto out; + + if (sdata->type == IEEE80211_IF_TYPE_MNTR) { + if (!netif_running(sdata->dev)) + continue; + monitors--; + if (monitors) + skb2 = skb_clone(skb, GFP_KERNEL); + else + skb2 = NULL; + skb->dev = sdata->dev; + /* XXX: is this sufficient for BPF? */ + skb_set_mac_header(skb, 0); + skb->ip_summed = CHECKSUM_UNNECESSARY; + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = htons(ETH_P_802_2); + memset(skb->cb, 0, sizeof(skb->cb)); + netif_rx(skb); + skb = skb2; + break; + } + } + out: + read_unlock(&local->sub_if_lock); + if (skb) + dev_kfree_skb(skb); } EXPORT_SYMBOL(ieee80211_tx_status); @@ -4926,6 +5012,14 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) goto fail_workqueue; } + /* + * The hardware needs headroom for sending the frame, + * and we need some headroom for passing the frame to monitor + * interfaces, but never both at the same time. + */ + local->tx_headroom = max(local->hw.extra_tx_headroom, + sizeof(struct ieee80211_tx_status_rtap_hdr)); + debugfs_hw_add(local); local->hw.conf.beacon_int = 1000; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index af4d14d0b96..5a91e179efa 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -392,6 +392,7 @@ struct ieee80211_local { int monitors; struct iw_statistics wstats; u8 wstats_flags; + int tx_headroom; /* required headroom for hardware/radiotap */ enum { IEEE80211_DEV_UNINITIALIZED = 0, -- cgit v1.2.3-70-g09d2 From 7f8c05982865a32ee001b79ee0bd469f55ac8aba Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jul 2007 19:32:08 +0200 Subject: [PATCH] mac80211: remove ieee80211_msg_passive_scan This constant is unused. Signed-off-by: Johannes Berg Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/ieee80211_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/ieee80211_common.h b/net/mac80211/ieee80211_common.h index b9a73e7f5f7..7af6710bf71 100644 --- a/net/mac80211/ieee80211_common.h +++ b/net/mac80211/ieee80211_common.h @@ -47,7 +47,7 @@ enum ieee80211_msg_type { ieee80211_msg_normal = 0, ieee80211_msg_tx_callback_ack = 1, ieee80211_msg_tx_callback_fail = 2, - ieee80211_msg_passive_scan = 3, + /* hole at 3, was ieee80211_msg_passive_scan but unused */ ieee80211_msg_wep_frame_unknown_key = 4, ieee80211_msg_michael_mic_failure = 5, /* hole at 6, was monitor but never sent to userspace */ -- cgit v1.2.3-70-g09d2 From c59304b5e07128816347fe3996d7952561f60529 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jul 2007 19:32:08 +0200 Subject: [PATCH] mac80211: remove ieee80211_set_aid_for_sta Remove ieee80211_set_aid_for_sta and associated code. Signed-off-by: Johannes Berg Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- include/net/mac80211.h | 6 ------ net/mac80211/ieee80211.c | 28 ---------------------------- net/mac80211/ieee80211_common.h | 7 +------ 3 files changed, 1 insertion(+), 40 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a7f122b7994..627885765a3 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -921,12 +921,6 @@ struct sk_buff * ieee80211_get_buffered_bc(struct ieee80211_hw *hw, int if_id, struct ieee80211_tx_control *control); -/* Low level drivers that have their own MLME and MAC indicate - * the aid for an associating station with this call */ -int ieee80211_set_aid_for_sta(struct ieee80211_hw *hw, - u8 *peer_address, u16 aid); - - /* Given an sk_buff with a raw 802.11 header at the data pointer this function * returns the 802.11 header length in bytes (not including encryption * headers). If the data in the sk_buff is too short to contain a valid 802.11 diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 85f23fd866a..4bcf18097e5 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -3165,34 +3165,6 @@ int ieee80211_radar_status(struct ieee80211_hw *hw, int channel, } EXPORT_SYMBOL(ieee80211_radar_status); -int ieee80211_set_aid_for_sta(struct ieee80211_hw *hw, u8 *peer_address, - u16 aid) -{ - struct sk_buff *skb; - struct ieee80211_msg_set_aid_for_sta *msg; - struct ieee80211_local *local = hw_to_local(hw); - - /* unlikely because if this event only happens for APs, - * which require an open ap device. */ - if (unlikely(!local->apdev)) - return 0; - - skb = dev_alloc_skb(sizeof(struct ieee80211_frame_info) + - sizeof(struct ieee80211_msg_set_aid_for_sta)); - - if (!skb) - return -ENOMEM; - skb_reserve(skb, sizeof(struct ieee80211_frame_info)); - - msg = (struct ieee80211_msg_set_aid_for_sta *) - skb_put(skb, sizeof(struct ieee80211_msg_set_aid_for_sta)); - memcpy(msg->sta_address, peer_address, ETH_ALEN); - msg->aid = aid; - - ieee80211_rx_mgmt(local, skb, NULL, ieee80211_msg_set_aid_for_sta); - return 0; -} -EXPORT_SYMBOL(ieee80211_set_aid_for_sta); static void ap_sta_ps_start(struct net_device *dev, struct sta_info *sta) { diff --git a/net/mac80211/ieee80211_common.h b/net/mac80211/ieee80211_common.h index 7af6710bf71..77c6afb7f6a 100644 --- a/net/mac80211/ieee80211_common.h +++ b/net/mac80211/ieee80211_common.h @@ -52,16 +52,11 @@ enum ieee80211_msg_type { ieee80211_msg_michael_mic_failure = 5, /* hole at 6, was monitor but never sent to userspace */ ieee80211_msg_sta_not_assoc = 7, - ieee80211_msg_set_aid_for_sta = 8 /* used by Intersil MVC driver */, + /* 8 was ieee80211_msg_set_aid_for_sta */ ieee80211_msg_key_threshold_notification = 9, ieee80211_msg_radar = 11, }; -struct ieee80211_msg_set_aid_for_sta { - char sta_address[ETH_ALEN]; - u16 aid; -}; - struct ieee80211_msg_key_notification { int tx_rx_count; char ifname[IFNAMSIZ]; -- cgit v1.2.3-70-g09d2 From 333af2f0715c8d4d38cb657d8f4fb7c4e3ceba9f Mon Sep 17 00:00:00 2001 From: Hong Liu Date: Tue, 10 Jul 2007 19:32:08 +0200 Subject: [PATCH] mac80211: add support for iwlist channel Add supported channels info in SIOCGIWRANGE implementation. Signed-off-by: Hong Liu Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/ieee80211_ioctl.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/net/mac80211/ieee80211_ioctl.c b/net/mac80211/ieee80211_ioctl.c index 66e8a976b31..ef74a91e02a 100644 --- a/net/mac80211/ieee80211_ioctl.c +++ b/net/mac80211/ieee80211_ioctl.c @@ -345,6 +345,8 @@ static int ieee80211_ioctl_giwrange(struct net_device *dev, { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct iw_range *range = (struct iw_range *) extra; + struct ieee80211_hw_mode *mode = NULL; + int c = 0; data->length = sizeof(struct iw_range); memset(range, 0, sizeof(struct iw_range)); @@ -378,6 +380,29 @@ static int ieee80211_ioctl_giwrange(struct net_device *dev, range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 | IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP; + list_for_each_entry(mode, &local->modes_list, list) { + int i = 0; + + if (!(local->enabled_modes & (1 << mode->mode)) || + (local->hw_modes & local->enabled_modes & + (1 << MODE_IEEE80211G) && mode->mode == MODE_IEEE80211B)) + continue; + + while (i < mode->num_channels && c < IW_MAX_FREQUENCIES) { + struct ieee80211_channel *chan = &mode->channels[i]; + + if (chan->flag & IEEE80211_CHAN_W_SCAN) { + range->freq[c].i = chan->chan; + range->freq[c].m = chan->freq * 100000; + range->freq[c].e = 1; + c++; + } + i++; + } + } + range->num_channels = c; + range->num_frequency = c; + IW_EVENT_CAPA_SET_KERNEL(range->event_capa); IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY); IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); -- cgit v1.2.3-70-g09d2 From 40f7cac9f8dd662c1dd02334afdceef0be03e34f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jul 2007 19:32:08 +0200 Subject: [PATCH] mac80211: separate monitor/subif_start_xmit This patch separates the monitor interface start_xmit from the subif start xmit (those other devices have 802.3 framing, monitor interfaces have radiotap framing) Signed-off-by: Johannes Berg Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/ieee80211.c | 101 +++++++++++++++++++++-------------------- net/mac80211/ieee80211_i.h | 2 + net/mac80211/ieee80211_iface.c | 3 ++ 3 files changed, 58 insertions(+), 48 deletions(-) diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 4bcf18097e5..e91698308f3 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -1673,6 +1673,56 @@ static int ieee80211_master_start_xmit(struct sk_buff *skb, } +int ieee80211_monitor_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_tx_packet_data *pkt_data; + struct ieee80211_radiotap_header *prthdr = + (struct ieee80211_radiotap_header *)skb->data; + u16 len; + + /* + * there must be a radiotap header at the + * start in this case + */ + if (unlikely(prthdr->it_version)) { + /* only version 0 is supported */ + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + skb->dev = local->mdev; + + pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; + memset(pkt_data, 0, sizeof(*pkt_data)); + pkt_data->ifindex = dev->ifindex; + pkt_data->mgmt_iface = 0; + pkt_data->do_not_encrypt = 1; + + /* above needed because we set skb device to master */ + + /* + * fix up the pointers accounting for the radiotap + * header still being in there. We are being given + * a precooked IEEE80211 header so no need for + * normal processing + */ + len = le16_to_cpu(get_unaligned(&prthdr->it_len)); + skb_set_mac_header(skb, len); + skb_set_network_header(skb, len + sizeof(struct ieee80211_hdr)); + skb_set_transport_header(skb, len + sizeof(struct ieee80211_hdr)); + + /* + * pass the radiotap header up to + * the next stage intact + */ + dev_queue_xmit(skb); + + return NETDEV_TX_OK; +} + + /** * ieee80211_subif_start_xmit - netif start_xmit function for Ethernet-type * subinterfaces (wlan#, WDS, and VLAN interfaces) @@ -1688,8 +1738,8 @@ static int ieee80211_master_start_xmit(struct sk_buff *skb, * encapsulated packet will then be passed to master interface, wlan#.11, for * transmission (through low-level driver). */ -static int ieee80211_subif_start_xmit(struct sk_buff *skb, - struct net_device *dev) +int ieee80211_subif_start_xmit(struct sk_buff *skb, + struct net_device *dev) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_tx_packet_data *pkt_data; @@ -1710,51 +1760,6 @@ static int ieee80211_subif_start_xmit(struct sk_buff *skb, goto fail; } - if (unlikely(sdata->type == IEEE80211_IF_TYPE_MNTR)) { - struct ieee80211_radiotap_header *prthdr = - (struct ieee80211_radiotap_header *)skb->data; - u16 len; - - /* - * there must be a radiotap header at the - * start in this case - */ - if (unlikely(prthdr->it_version)) { - /* only version 0 is supported */ - ret = 0; - goto fail; - } - - skb->dev = local->mdev; - - pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; - memset(pkt_data, 0, sizeof(*pkt_data)); - pkt_data->ifindex = sdata->dev->ifindex; - pkt_data->mgmt_iface = 0; - pkt_data->do_not_encrypt = 1; - - /* above needed because we set skb device to master */ - - /* - * fix up the pointers accounting for the radiotap - * header still being in there. We are being given - * a precooked IEEE80211 header so no need for - * normal processing - */ - len = le16_to_cpu(get_unaligned(&prthdr->it_len)); - skb_set_mac_header(skb, len); - skb_set_network_header(skb, len + sizeof(hdr)); - skb_set_transport_header(skb, len + sizeof(hdr)); - - /* - * pass the radiotap header up to - * the next stage intact - */ - dev_queue_xmit(skb); - - return 0; - } - nh_pos = skb_network_header(skb) - skb->data; h_pos = skb_transport_header(skb) - skb->data; @@ -1882,7 +1887,7 @@ static int ieee80211_subif_start_xmit(struct sk_buff *skb, pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; memset(pkt_data, 0, sizeof(struct ieee80211_tx_packet_data)); - pkt_data->ifindex = sdata->dev->ifindex; + pkt_data->ifindex = dev->ifindex; pkt_data->mgmt_iface = (sdata->type == IEEE80211_IF_TYPE_MGMT); pkt_data->do_not_encrypt = no_encrypt; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5a91e179efa..fadcbccc0da 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -720,6 +720,8 @@ void ieee80211_prepare_rates(struct ieee80211_local *local, struct ieee80211_hw_mode *mode); void ieee80211_tx_set_iswep(struct ieee80211_txrx_data *tx); int ieee80211_if_update_wds(struct net_device *dev, u8 *remote_addr); +int ieee80211_monitor_start_xmit(struct sk_buff *skb, struct net_device *dev); +int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev); void ieee80211_if_setup(struct net_device *dev); void ieee80211_if_mgmt_setup(struct net_device *dev); int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local, diff --git a/net/mac80211/ieee80211_iface.c b/net/mac80211/ieee80211_iface.c index cf0f32e8c2a..8532a5ccdd1 100644 --- a/net/mac80211/ieee80211_iface.c +++ b/net/mac80211/ieee80211_iface.c @@ -157,6 +157,8 @@ void ieee80211_if_set_type(struct net_device *dev, int type) struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); int oldtype = sdata->type; + dev->hard_start_xmit = ieee80211_subif_start_xmit; + sdata->type = type; switch (type) { case IEEE80211_IF_TYPE_WDS: @@ -196,6 +198,7 @@ void ieee80211_if_set_type(struct net_device *dev, int type) } case IEEE80211_IF_TYPE_MNTR: dev->type = ARPHRD_IEEE80211_RADIOTAP; + dev->hard_start_xmit = ieee80211_monitor_start_xmit; break; default: printk(KERN_WARNING "%s: %s: Unknown interface type 0x%x", -- cgit v1.2.3-70-g09d2 From 3ef8bed4692a0de6a47d162196c850c5dea85b70 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jul 2007 19:32:09 +0200 Subject: [PATCH] mac80211: kill rate control ioctls These aren't used anywhere (hostapd, wpa_supplicant) and until we have a proper interface to the rate control algorithms they don't make much sense either since e.g. rc80211_lowest won't honour them. Signed-off-by: Johannes Berg Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/hostapd_ioctl.h | 4 --- net/mac80211/ieee80211.c | 2 -- net/mac80211/ieee80211_i.h | 2 -- net/mac80211/ieee80211_ioctl.c | 80 ------------------------------------------ net/mac80211/rc80211_simple.c | 8 +++-- 5 files changed, 6 insertions(+), 90 deletions(-) diff --git a/net/mac80211/hostapd_ioctl.h b/net/mac80211/hostapd_ioctl.h index 34fa128e987..252204fd0ab 100644 --- a/net/mac80211/hostapd_ioctl.h +++ b/net/mac80211/hostapd_ioctl.h @@ -40,10 +40,6 @@ enum { PRISM2_PARAM_ANTENNA_MODE = 1013, PRISM2_PARAM_STAT_TIME = 1016, PRISM2_PARAM_STA_ANTENNA_SEL = 1017, - PRISM2_PARAM_FORCE_UNICAST_RATE = 1018, - PRISM2_PARAM_RATE_CTRL_NUM_UP = 1019, - PRISM2_PARAM_RATE_CTRL_NUM_DOWN = 1020, - PRISM2_PARAM_MAX_RATECTRL_RATE = 1021, PRISM2_PARAM_TX_POWER_REDUCTION = 1022, PRISM2_PARAM_KEY_TX_RX_THRESHOLD = 1024, PRISM2_PARAM_DEFAULT_WEP_ONLY = 1026, diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index e91698308f3..773a103ee3a 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -4924,8 +4924,6 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, local->short_retry_limit = 7; local->long_retry_limit = 4; local->hw.conf.radio_enabled = 1; - local->rate_ctrl_num_up = RATE_CONTROL_NUM_UP; - local->rate_ctrl_num_down = RATE_CONTROL_NUM_DOWN; local->enabled_modes = (unsigned int) -1; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index fadcbccc0da..b222a9afd4e 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -514,8 +514,6 @@ struct ieee80211_local { STA_ANTENNA_SEL_SW_CTRL_DEBUG = 2 } sta_antenna_sel; - int rate_ctrl_num_up, rate_ctrl_num_down; - #ifdef CONFIG_MAC80211_DEBUG_COUNTERS /* TX/RX handler statistics */ unsigned int tx_handlers_drop; diff --git a/net/mac80211/ieee80211_ioctl.c b/net/mac80211/ieee80211_ioctl.c index ef74a91e02a..f404f1f4251 100644 --- a/net/mac80211/ieee80211_ioctl.c +++ b/net/mac80211/ieee80211_ioctl.c @@ -1074,62 +1074,6 @@ static int ieee80211_ioctl_clear_keys(struct net_device *dev) } -static int -ieee80211_ioctl_force_unicast_rate(struct net_device *dev, - struct ieee80211_sub_if_data *sdata, - int rate) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hw_mode *mode; - int i; - - if (sdata->type != IEEE80211_IF_TYPE_AP) - return -ENOENT; - - if (rate == 0) { - sdata->u.ap.force_unicast_rateidx = -1; - return 0; - } - - mode = local->oper_hw_mode; - for (i = 0; i < mode->num_rates; i++) { - if (mode->rates[i].rate == rate) { - sdata->u.ap.force_unicast_rateidx = i; - return 0; - } - } - return -EINVAL; -} - - -static int -ieee80211_ioctl_max_ratectrl_rate(struct net_device *dev, - struct ieee80211_sub_if_data *sdata, - int rate) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hw_mode *mode; - int i; - - if (sdata->type != IEEE80211_IF_TYPE_AP) - return -ENOENT; - - if (rate == 0) { - sdata->u.ap.max_ratectrl_rateidx = -1; - return 0; - } - - mode = local->oper_hw_mode; - for (i = 0; i < mode->num_rates; i++) { - if (mode->rates[i].rate == rate) { - sdata->u.ap.max_ratectrl_rateidx = i; - return 0; - } - } - return -EINVAL; -} - - static void ieee80211_key_enable_hwaccel(struct ieee80211_local *local, struct ieee80211_key *key) { @@ -1317,22 +1261,6 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev, local->sta_antenna_sel = value; break; - case PRISM2_PARAM_FORCE_UNICAST_RATE: - ret = ieee80211_ioctl_force_unicast_rate(dev, sdata, value); - break; - - case PRISM2_PARAM_MAX_RATECTRL_RATE: - ret = ieee80211_ioctl_max_ratectrl_rate(dev, sdata, value); - break; - - case PRISM2_PARAM_RATE_CTRL_NUM_UP: - local->rate_ctrl_num_up = value; - break; - - case PRISM2_PARAM_RATE_CTRL_NUM_DOWN: - local->rate_ctrl_num_down = value; - break; - case PRISM2_PARAM_TX_POWER_REDUCTION: if (value < 0) ret = -EINVAL; @@ -1451,14 +1379,6 @@ static int ieee80211_ioctl_get_prism2_param(struct net_device *dev, *param = local->sta_antenna_sel; break; - case PRISM2_PARAM_RATE_CTRL_NUM_UP: - *param = local->rate_ctrl_num_up; - break; - - case PRISM2_PARAM_RATE_CTRL_NUM_DOWN: - *param = local->rate_ctrl_num_down; - break; - case PRISM2_PARAM_TX_POWER_REDUCTION: *param = local->hw.conf.tx_power_reduction; break; diff --git a/net/mac80211/rc80211_simple.c b/net/mac80211/rc80211_simple.c index 5ae7fc45466..f6780d63b34 100644 --- a/net/mac80211/rc80211_simple.c +++ b/net/mac80211/rc80211_simple.c @@ -187,9 +187,13 @@ static void rate_control_simple_tx_status(void *priv, struct net_device *dev, } #endif - if (per_failed > local->rate_ctrl_num_down) { + /* + * XXX: Make these configurable once we have an + * interface to the rate control algorithms + */ + if (per_failed > RATE_CONTROL_NUM_DOWN) { rate_control_rate_dec(local, sta); - } else if (per_failed < local->rate_ctrl_num_up) { + } else if (per_failed < RATE_CONTROL_NUM_UP) { rate_control_rate_inc(local, sta); } srctrl->tx_avg_rate_sum += status->control.rate->rate; -- cgit v1.2.3-70-g09d2 From 9771f740c6319e67bab44d18b9717c894a6f266d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jul 2007 19:32:09 +0200 Subject: [PATCH] mac80211: kill antenna select ioctls Not used anywhere. Signed-off-by: Johannes Berg Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/hostapd_ioctl.h | 2 -- net/mac80211/ieee80211_ioctl.c | 20 -------------------- 2 files changed, 22 deletions(-) diff --git a/net/mac80211/hostapd_ioctl.h b/net/mac80211/hostapd_ioctl.h index 252204fd0ab..230eb4400ec 100644 --- a/net/mac80211/hostapd_ioctl.h +++ b/net/mac80211/hostapd_ioctl.h @@ -26,8 +26,6 @@ * mess shall be deleted completely. */ enum { PRISM2_PARAM_IEEE_802_1X = 23, - PRISM2_PARAM_ANTSEL_TX = 24, - PRISM2_PARAM_ANTSEL_RX = 25, /* Instant802 additions */ PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES = 1001, diff --git a/net/mac80211/ieee80211_ioctl.c b/net/mac80211/ieee80211_ioctl.c index f404f1f4251..ab09e9a90f4 100644 --- a/net/mac80211/ieee80211_ioctl.c +++ b/net/mac80211/ieee80211_ioctl.c @@ -1197,18 +1197,6 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev, sdata->ieee802_1x = value; break; - case PRISM2_PARAM_ANTSEL_TX: - local->hw.conf.antenna_sel_tx = value; - if (ieee80211_hw_config(local)) - ret = -EINVAL; - break; - - case PRISM2_PARAM_ANTSEL_RX: - local->hw.conf.antenna_sel_rx = value; - if (ieee80211_hw_config(local)) - ret = -EINVAL; - break; - case PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES: local->cts_protect_erp_frames = value; break; @@ -1340,14 +1328,6 @@ static int ieee80211_ioctl_get_prism2_param(struct net_device *dev, *param = sdata->ieee802_1x; break; - case PRISM2_PARAM_ANTSEL_TX: - *param = local->hw.conf.antenna_sel_tx; - break; - - case PRISM2_PARAM_ANTSEL_RX: - *param = local->hw.conf.antenna_sel_rx; - break; - case PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES: *param = local->cts_protect_erp_frames; break; -- cgit v1.2.3-70-g09d2 From fda6cc7ac45f97d4d40cc42781041dec488fa78c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jul 2007 19:32:09 +0200 Subject: [PATCH] mac80211: remove PRISM2_PARAM_DROP_UNENCRYPTED ioctl Interestingly, wpa_supplicant doesn't use it, but uses the currently unsupported IW_AUTH_DROP_UNENCRYPTED. So I guess it doesn't matter anyway. Signed-off-by: Johannes Berg Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/hostapd_ioctl.h | 1 - net/mac80211/ieee80211_ioctl.c | 8 -------- 2 files changed, 9 deletions(-) diff --git a/net/mac80211/hostapd_ioctl.h b/net/mac80211/hostapd_ioctl.h index 230eb4400ec..95ca1f983a7 100644 --- a/net/mac80211/hostapd_ioctl.h +++ b/net/mac80211/hostapd_ioctl.h @@ -29,7 +29,6 @@ enum { /* Instant802 additions */ PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES = 1001, - PRISM2_PARAM_DROP_UNENCRYPTED = 1002, PRISM2_PARAM_PREAMBLE = 1003, PRISM2_PARAM_SHORT_SLOT_TIME = 1006, PRISM2_PARAM_NEXT_MODE = 1008, diff --git a/net/mac80211/ieee80211_ioctl.c b/net/mac80211/ieee80211_ioctl.c index ab09e9a90f4..f465d0a1c15 100644 --- a/net/mac80211/ieee80211_ioctl.c +++ b/net/mac80211/ieee80211_ioctl.c @@ -1201,10 +1201,6 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev, local->cts_protect_erp_frames = value; break; - case PRISM2_PARAM_DROP_UNENCRYPTED: - sdata->drop_unencrypted = value; - break; - case PRISM2_PARAM_PREAMBLE: local->short_preamble = value; break; @@ -1332,10 +1328,6 @@ static int ieee80211_ioctl_get_prism2_param(struct net_device *dev, *param = local->cts_protect_erp_frames; break; - case PRISM2_PARAM_DROP_UNENCRYPTED: - *param = sdata->drop_unencrypted; - break; - case PRISM2_PARAM_PREAMBLE: *param = local->short_preamble; break; -- cgit v1.2.3-70-g09d2 From 191b92666e3a8aa52af84e2d03350c25145be695 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jul 2007 19:32:09 +0200 Subject: [PATCH] mac80211: kill PRISM2_PARAM_CLEAR_KEYS Not used anywhere, hence dead code. wpa_supplicant has its own clear_keys routine. Signed-off-by: Johannes Berg Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/hostapd_ioctl.h | 1 - net/mac80211/ieee80211_ioctl.c | 60 ------------------------------------------ 2 files changed, 61 deletions(-) diff --git a/net/mac80211/hostapd_ioctl.h b/net/mac80211/hostapd_ioctl.h index 95ca1f983a7..52da513f060 100644 --- a/net/mac80211/hostapd_ioctl.h +++ b/net/mac80211/hostapd_ioctl.h @@ -32,7 +32,6 @@ enum { PRISM2_PARAM_PREAMBLE = 1003, PRISM2_PARAM_SHORT_SLOT_TIME = 1006, PRISM2_PARAM_NEXT_MODE = 1008, - PRISM2_PARAM_CLEAR_KEYS = 1009, PRISM2_PARAM_RADIO_ENABLED = 1010, PRISM2_PARAM_ANTENNA_MODE = 1013, PRISM2_PARAM_STAT_TIME = 1016, diff --git a/net/mac80211/ieee80211_ioctl.c b/net/mac80211/ieee80211_ioctl.c index f465d0a1c15..9c1d076b194 100644 --- a/net/mac80211/ieee80211_ioctl.c +++ b/net/mac80211/ieee80211_ioctl.c @@ -1018,62 +1018,6 @@ static int ieee80211_ioctl_giwretry(struct net_device *dev, return 0; } -static int ieee80211_ioctl_clear_keys(struct net_device *dev) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_key_conf key; - int i; - u8 addr[ETH_ALEN]; - struct ieee80211_key_conf *keyconf; - struct ieee80211_sub_if_data *sdata; - struct sta_info *sta; - - memset(addr, 0xff, ETH_ALEN); - read_lock(&local->sub_if_lock); - list_for_each_entry(sdata, &local->sub_if_list, list) { - for (i = 0; i < NUM_DEFAULT_KEYS; i++) { - keyconf = NULL; - if (sdata->keys[i] && - !sdata->keys[i]->force_sw_encrypt && - local->ops->set_key && - (keyconf = ieee80211_key_data2conf(local, - sdata->keys[i]))) - local->ops->set_key(local_to_hw(local), - DISABLE_KEY, addr, - keyconf, 0); - kfree(keyconf); - ieee80211_key_free(sdata->keys[i]); - sdata->keys[i] = NULL; - } - sdata->default_key = NULL; - } - read_unlock(&local->sub_if_lock); - - spin_lock_bh(&local->sta_lock); - list_for_each_entry(sta, &local->sta_list, list) { - keyconf = NULL; - if (sta->key && !sta->key->force_sw_encrypt && - local->ops->set_key && - (keyconf = ieee80211_key_data2conf(local, sta->key))) - local->ops->set_key(local_to_hw(local), DISABLE_KEY, - sta->addr, keyconf, sta->aid); - kfree(keyconf); - ieee80211_key_free(sta->key); - sta->key = NULL; - } - spin_unlock_bh(&local->sta_lock); - - memset(&key, 0, sizeof(key)); - if (local->ops->set_key && - local->ops->set_key(local_to_hw(local), REMOVE_ALL_KEYS, - NULL, &key, 0)) - printk(KERN_DEBUG "%s: failed to remove hwaccel keys\n", - dev->name); - - return 0; -} - - static void ieee80211_key_enable_hwaccel(struct ieee80211_local *local, struct ieee80211_key *key) { @@ -1227,10 +1171,6 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev, local->next_mode = value; break; - case PRISM2_PARAM_CLEAR_KEYS: - ret = ieee80211_ioctl_clear_keys(dev); - break; - case PRISM2_PARAM_RADIO_ENABLED: ret = ieee80211_ioctl_set_radio_enabled(dev, value); break; -- cgit v1.2.3-70-g09d2 From 5558235c6bade6662e6f257a35f2dfdc8a742147 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jul 2007 19:32:09 +0200 Subject: [PATCH] mac80211: conserve stack space due to padding This patch reorders some fields in struct ieee802_11_elems to save 17*7 or 17*3 bytes (on 64/32-bit machines respectively) stack space in a few functions. Signed-off-by: Johannes Berg Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/ieee80211_sta.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c index 91b545c144c..f3ca83743b4 100644 --- a/net/mac80211/ieee80211_sta.c +++ b/net/mac80211/ieee80211_sta.c @@ -76,33 +76,36 @@ static int ieee80211_sta_config_auth(struct net_device *dev, /* Parsed Information Elements */ struct ieee802_11_elems { + /* pointers to IEs */ u8 *ssid; - u8 ssid_len; u8 *supp_rates; - u8 supp_rates_len; u8 *fh_params; - u8 fh_params_len; u8 *ds_params; - u8 ds_params_len; u8 *cf_params; - u8 cf_params_len; u8 *tim; - u8 tim_len; u8 *ibss_params; - u8 ibss_params_len; u8 *challenge; - u8 challenge_len; u8 *wpa; - u8 wpa_len; u8 *rsn; - u8 rsn_len; u8 *erp_info; - u8 erp_info_len; u8 *ext_supp_rates; - u8 ext_supp_rates_len; u8 *wmm_info; - u8 wmm_info_len; u8 *wmm_param; + + /* length of them, respectively */ + u8 ssid_len; + u8 supp_rates_len; + u8 fh_params_len; + u8 ds_params_len; + u8 cf_params_len; + u8 tim_len; + u8 ibss_params_len; + u8 challenge_len; + u8 wpa_len; + u8 rsn_len; + u8 erp_info_len; + u8 ext_supp_rates_len; + u8 wmm_info_len; u8 wmm_param_len; }; -- cgit v1.2.3-70-g09d2 From 4480f15ca62a595248d6d8e2b3e75052113cde59 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jul 2007 19:32:10 +0200 Subject: [PATCH] mac80211: clarify some mac80211 things The semantics of not having an add_interface callback are not well defined, this callback is required because otherwise you cannot obtain the requested MAC address of the device. Change the documentation to reflect this, add a note about having no MAC address at all, add a warning that mac_addr in struct ieee80211_if_init_conf can be NULL and finally verify that a few callbacks are assigned by way of BUG_ON() Signed-off-by: Johannes Berg Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- include/net/mac80211.h | 16 ++++++++++++---- net/mac80211/ieee80211.c | 29 ++++++++++++----------------- 2 files changed, 24 insertions(+), 21 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 627885765a3..c34fd9a6160 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -347,9 +347,16 @@ enum ieee80211_if_types { * @mac_addr: pointer to MAC address of the interface. This pointer is valid * until the interface is removed (i.e. it cannot be used after * remove_interface() callback was called for this interface). + * This pointer will be %NULL for monitor interfaces, be careful. * * This structure is used in add_interface() and remove_interface() * callbacks of &struct ieee80211_hw. + * + * When you allow multiple interfaces to be added to your PHY, take care + * that the hardware can actually handle multiple MAC addresses. However, + * also take care that when there's no interface left with mac_addr != %NULL + * you remove the MAC address from the device to avoid acknowledging packets + * in pure monitor mode. */ struct ieee80211_if_init_conf { int if_id; @@ -574,10 +581,11 @@ struct ieee80211_ops { * to returning zero. By returning non-zero addition of the interface * is inhibited. Unless monitor_during_oper is set, it is guaranteed * that monitor interfaces and normal interfaces are mutually - * exclusive. The open() handler is called after add_interface() - * if this is the first device added. At least one of the open() - * open() and add_interface() callbacks has to be assigned. If - * add_interface() is NULL, one STA interface is permitted only. */ + * exclusive. If assigned, the open() handler is called after + * add_interface() if this is the first device added. The + * add_interface() callback has to be assigned because it is the only + * way to obtain the requested MAC address for any interface. + */ int (*add_interface)(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 773a103ee3a..fe32a2d1605 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -2605,8 +2605,7 @@ static void ieee80211_start_hard_monitor(struct ieee80211_local *local) struct ieee80211_if_init_conf conf; if (local->open_count && local->open_count == local->monitors && - !(local->hw.flags & IEEE80211_HW_MONITOR_DURING_OPER) && - local->ops->add_interface) { + !(local->hw.flags & IEEE80211_HW_MONITOR_DURING_OPER)) { conf.if_id = -1; conf.type = IEEE80211_IF_TYPE_MNTR; conf.mac_addr = NULL; @@ -2649,21 +2648,14 @@ static int ieee80211_open(struct net_device *dev) } ieee80211_start_soft_monitor(local); - if (local->ops->add_interface) { - conf.if_id = dev->ifindex; - conf.type = sdata->type; - conf.mac_addr = dev->dev_addr; - res = local->ops->add_interface(local_to_hw(local), &conf); - if (res) { - if (sdata->type == IEEE80211_IF_TYPE_MNTR) - ieee80211_start_hard_monitor(local); - return res; - } - } else { - if (sdata->type != IEEE80211_IF_TYPE_STA) - return -EOPNOTSUPP; - if (local->open_count > 0) - return -ENOBUFS; + conf.if_id = dev->ifindex; + conf.type = sdata->type; + conf.mac_addr = dev->dev_addr; + res = local->ops->add_interface(local_to_hw(local), &conf); + if (res) { + if (sdata->type == IEEE80211_IF_TYPE_MNTR) + ieee80211_start_hard_monitor(local); + return res; } if (local->open_count == 0) { @@ -4896,6 +4888,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, ((sizeof(struct ieee80211_local) + NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST); + BUG_ON(!ops->tx); + BUG_ON(!ops->config); + BUG_ON(!ops->add_interface); local->ops = ops; /* for now, mdev needs sub_if_data :/ */ -- cgit v1.2.3-70-g09d2 From 1fd5e589d8c7d3cd42ddd39358338766cfcedec8 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 10 Jul 2007 19:32:10 +0200 Subject: [PATCH] mac80211: Implementation of SIOCSIWRATE The WEXT ioctl SIOCSIWRATE is not implemented in mac80211. This patch adds the missing routine. It supports the 'auto' keyword, fixed rates, and the combination of 'auto' and a fixed rate to select an upper bound. Based on the patch from Mohamed Abbas . Signed-off-by: Larry Finger Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/ieee80211_ioctl.c | 40 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) diff --git a/net/mac80211/ieee80211_ioctl.c b/net/mac80211/ieee80211_ioctl.c index 9c1d076b194..9bc209b72d4 100644 --- a/net/mac80211/ieee80211_ioctl.c +++ b/net/mac80211/ieee80211_ioctl.c @@ -863,6 +863,44 @@ static int ieee80211_ioctl_giwscan(struct net_device *dev, } +static int ieee80211_ioctl_siwrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rate, char *extra) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_hw_mode *mode; + int i; + u32 target_rate = rate->value / 100000; + struct ieee80211_sub_if_data *sdata; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (!sdata->bss) + return -ENODEV; + mode = local->oper_hw_mode; + /* target_rate = -1, rate->fixed = 0 means auto only, so use all rates + * target_rate = X, rate->fixed = 1 means only rate X + * target_rate = X, rate->fixed = 0 means all rates <= X */ + sdata->bss->max_ratectrl_rateidx = -1; + sdata->bss->force_unicast_rateidx = -1; + if (rate->value < 0) + return 0; + for (i=0; i< mode->num_rates; i++) { + struct ieee80211_rate *rates = &mode->rates[i]; + int this_rate = rates->rate; + + if (mode->mode == MODE_ATHEROS_TURBO || + mode->mode == MODE_ATHEROS_TURBOG) + this_rate *= 2; + if (target_rate == this_rate) { + sdata->bss->max_ratectrl_rateidx = i; + if (rate->fixed) + sdata->bss->force_unicast_rateidx = i; + break; + } + } + return 0; +} + static int ieee80211_ioctl_giwrate(struct net_device *dev, struct iw_request_info *info, struct iw_param *rate, char *extra) @@ -1658,7 +1696,7 @@ static const iw_handler ieee80211_handler[] = (iw_handler) NULL, /* SIOCGIWNICKN */ (iw_handler) NULL, /* -- hole -- */ (iw_handler) NULL, /* -- hole -- */ - (iw_handler) NULL, /* SIOCSIWRATE */ + (iw_handler) ieee80211_ioctl_siwrate, /* SIOCSIWRATE */ (iw_handler) ieee80211_ioctl_giwrate, /* SIOCGIWRATE */ (iw_handler) ieee80211_ioctl_siwrts, /* SIOCSIWRTS */ (iw_handler) ieee80211_ioctl_giwrts, /* SIOCGIWRTS */ -- cgit v1.2.3-70-g09d2 From 5628221caf88e2a052782b042e12da7cd34111b0 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Tue, 10 Jul 2007 19:32:10 +0200 Subject: [PATCH] mac80211: ERP IE handling improvements The "protection needed" flag is currently parsed out of the ERP IE in beacons. This patch allows the ERP IE to be available at assocation time and causes the appropriate actions to be performed earlier. It is slightly complicated by the fact that most APs don't include the ERP IE in association responses. To work around this, we store ERP values in the ieee80211_sta_bss structure. Also added some WLAN_ERP defines for use by upcoming patches. Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 11 +++++++ net/mac80211/ieee80211_i.h | 6 ++++ net/mac80211/ieee80211_sta.c | 69 ++++++++++++++++++++++++++++++++------------ 3 files changed, 67 insertions(+), 19 deletions(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ecd61e8438a..272f8c8c90d 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -227,6 +227,17 @@ struct ieee80211_cts { #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) #define WLAN_CAPABILITY_DSSS_OFDM (1<<13) +/* 802.11g ERP information element */ +#define WLAN_ERP_NON_ERP_PRESENT (1<<0) +#define WLAN_ERP_USE_PROTECTION (1<<1) +#define WLAN_ERP_BARKER_PREAMBLE (1<<2) + +/* WLAN_ERP_BARKER_PREAMBLE values */ +enum { + WLAN_ERP_PREAMBLE_SHORT = 0, + WLAN_ERP_PREAMBLE_LONG = 1, +}; + /* Status codes */ enum ieee80211_statuscode { WLAN_STATUS_SUCCESS = 0, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index b222a9afd4e..99ff7c5e920 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -99,6 +99,12 @@ struct ieee80211_sta_bss { int probe_resp; unsigned long last_update; + /* during assocation, we save an ERP value from a probe response so + * that we can feed ERP info to the driver when handling the + * association completes. these fields probably won't be up-to-date + * otherwise, you probably don't want to use them. */ + int has_erp_value; + u8 erp_value; }; diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c index f3ca83743b4..df6c410de16 100644 --- a/net/mac80211/ieee80211_sta.c +++ b/net/mac80211/ieee80211_sta.c @@ -314,6 +314,27 @@ static void ieee80211_sta_wmm_params(struct net_device *dev, } +static void ieee80211_handle_erp_ie(struct net_device *dev, u8 erp_value) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_if_sta *ifsta = &sdata->u.sta; + int use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0; + + if (use_protection != !!ifsta->use_protection) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: CTS protection %s (BSSID=" + MAC_FMT ")\n", + dev->name, + use_protection ? "enabled" : "disabled", + MAC_ARG(ifsta->bssid)); + } + ifsta->use_protection = use_protection ? 1 : 0; + local->cts_protect_erp_frames = use_protection; + } +} + + static void ieee80211_sta_send_associnfo(struct net_device *dev, struct ieee80211_if_sta *ifsta) { @@ -377,9 +398,18 @@ static void ieee80211_set_associated(struct net_device *dev, if (assoc) { struct ieee80211_sub_if_data *sdata; + struct ieee80211_sta_bss *bss; sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (sdata->type != IEEE80211_IF_TYPE_STA) return; + + bss = ieee80211_rx_bss_get(dev, ifsta->bssid); + if (bss) { + if (bss->has_erp_value) + ieee80211_handle_erp_ie(dev, bss->erp_value); + ieee80211_rx_bss_put(dev, bss); + } + netif_carrier_on(dev); ifsta->prev_bssid_set = 1; memcpy(ifsta->prev_bssid, sdata->u.sta.bssid, ETH_ALEN); @@ -1177,6 +1207,18 @@ static void ieee80211_rx_mgmt_assoc_resp(struct net_device *dev, return; } + /* it probably doesn't, but if the frame includes an ERP value then + * update our stored copy */ + if (elems.erp_info && elems.erp_info_len >= 1) { + struct ieee80211_sta_bss *bss + = ieee80211_rx_bss_get(dev, ifsta->bssid); + if (bss) { + bss->erp_value = elems.erp_info[0]; + bss->has_erp_value = 1; + ieee80211_rx_bss_put(dev, bss); + } + } + printk(KERN_DEBUG "%s: associated\n", dev->name); ifsta->aid = aid; ifsta->ap_capab = capab_info; @@ -1499,6 +1541,12 @@ static void ieee80211_rx_bss_info(struct net_device *dev, return; } + /* save the ERP value so that it is available at association time */ + if (elems.erp_info && elems.erp_info_len >= 1) { + bss->erp_value = elems.erp_info[0]; + bss->has_erp_value = 1; + } + bss->beacon_int = le16_to_cpu(mgmt->u.beacon.beacon_int); bss->capability = le16_to_cpu(mgmt->u.beacon.capab_info); if (elems.ssid && elems.ssid_len <= IEEE80211_MAX_SSID_LEN) { @@ -1614,10 +1662,8 @@ static void ieee80211_rx_mgmt_beacon(struct net_device *dev, size_t len, struct ieee80211_rx_status *rx_status) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_sub_if_data *sdata; struct ieee80211_if_sta *ifsta; - int use_protection; size_t baselen; struct ieee802_11_elems elems; @@ -1641,23 +1687,8 @@ static void ieee80211_rx_mgmt_beacon(struct net_device *dev, &elems) == ParseFailed) return; - use_protection = 0; - if (elems.erp_info && elems.erp_info_len >= 1) { - use_protection = - (elems.erp_info[0] & ERP_INFO_USE_PROTECTION) != 0; - } - - if (use_protection != !!ifsta->use_protection) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: CTS protection %s (BSSID=" - MAC_FMT ")\n", - dev->name, - use_protection ? "enabled" : "disabled", - MAC_ARG(ifsta->bssid)); - } - ifsta->use_protection = use_protection ? 1 : 0; - local->cts_protect_erp_frames = use_protection; - } + if (elems.erp_info && elems.erp_info_len >= 1) + ieee80211_handle_erp_ie(dev, elems.erp_info[0]); if (elems.wmm_param && ifsta->wmm_enabled) { ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param, -- cgit v1.2.3-70-g09d2 From 63fc33ceb0ccc08b3f62d7bfe56a33eb33ca9427 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Tue, 10 Jul 2007 19:32:11 +0200 Subject: [PATCH] mac80211: improved 802.11g CTS protection Currently, CTS protection is partially implemented twice: 1. via prism2 ioctls, only used by hostapd 2. via STA beacon parsing, recorded in sta.use_protection but never used (other than printed in debugfs) Protection control should be implemented on a per-subif basis. For example, a single physical device may be running a soft AP on one channel, and a STA on another. The AP interface should use protection based on what hostapd told it, and the STA interface should use protection based on beacon parsing. These should operate independantly: one subif using protection should not influence the other. To implement this, I moved the use_protection flag into ieee80211_sub_if_data and removed the device-global cts_protect_erp_frames flag. I also made the PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES write operation only available for AP interfaces, to avoid any possibility of the user messing with the behaviour of a STA. Signed-off-by: Daniel Drake Signed-off-by: Jiri Benc Signed-off-by: John W. Linville --- net/mac80211/debugfs_netdev.c | 2 +- net/mac80211/ieee80211.c | 5 ++--- net/mac80211/ieee80211_i.h | 3 +-- net/mac80211/ieee80211_ioctl.c | 7 +++++-- net/mac80211/ieee80211_sta.c | 8 ++++---- 5 files changed, 13 insertions(+), 12 deletions(-) diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index 9e3964638ba..a3e01d76d50 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -118,7 +118,7 @@ static ssize_t ieee80211_if_fmt_flags( sdata->u.sta.authenticated ? "AUTH\n" : "", sdata->u.sta.associated ? "ASSOC\n" : "", sdata->u.sta.probereq_poll ? "PROBEREQ POLL\n" : "", - sdata->u.sta.use_protection ? "CTS prot\n" : ""); + sdata->use_protection ? "CTS prot\n" : ""); } __IEEE80211_IF_FILE(flags); diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index fe32a2d1605..2ddf4ef4065 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -442,7 +442,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_txrx_data *tx) if (!tx->u.tx.rate) return TXRX_DROP; if (tx->u.tx.mode->mode == MODE_IEEE80211G && - tx->local->cts_protect_erp_frames && tx->fragmented && + tx->sdata->use_protection && tx->fragmented && extra.nonerp) { tx->u.tx.last_frag_rate = tx->u.tx.rate; tx->u.tx.probe_last_frag = extra.probe ? 1 : 0; @@ -868,8 +868,7 @@ ieee80211_tx_h_misc(struct ieee80211_txrx_data *tx) * for the frame. */ if (mode->mode == MODE_IEEE80211G && (tx->u.tx.rate->flags & IEEE80211_RATE_ERP) && - tx->u.tx.unicast && - tx->local->cts_protect_erp_frames && + tx->u.tx.unicast && tx->sdata->use_protection && !(control->flags & IEEE80211_TXCTL_USE_RTS_CTS)) control->flags |= IEEE80211_TXCTL_USE_CTS_PROTECT; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 99ff7c5e920..055a2a91218 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -241,7 +241,6 @@ struct ieee80211_if_sta { unsigned int authenticated:1; unsigned int associated:1; unsigned int probereq_poll:1; - unsigned int use_protection:1; unsigned int create_ibss:1; unsigned int mixed_cell:1; unsigned int wmm_enabled:1; @@ -284,6 +283,7 @@ struct ieee80211_sub_if_data { int mc_count; unsigned int allmulti:1; unsigned int promisc:1; + unsigned int use_protection:1; /* CTS protect ERP frames */ struct net_device_stats stats; int drop_unencrypted; @@ -444,7 +444,6 @@ struct ieee80211_local { int *basic_rates[NUM_IEEE80211_MODES]; int rts_threshold; - int cts_protect_erp_frames; int fragmentation_threshold; int short_retry_limit; /* dot11ShortRetryLimit */ int long_retry_limit; /* dot11LongRetryLimit */ diff --git a/net/mac80211/ieee80211_ioctl.c b/net/mac80211/ieee80211_ioctl.c index 9bc209b72d4..5918dd079e1 100644 --- a/net/mac80211/ieee80211_ioctl.c +++ b/net/mac80211/ieee80211_ioctl.c @@ -1180,7 +1180,10 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev, break; case PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES: - local->cts_protect_erp_frames = value; + if (sdata->type != IEEE80211_IF_TYPE_AP) + ret = -ENOENT; + else + sdata->use_protection = value; break; case PRISM2_PARAM_PREAMBLE: @@ -1303,7 +1306,7 @@ static int ieee80211_ioctl_get_prism2_param(struct net_device *dev, break; case PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES: - *param = local->cts_protect_erp_frames; + *param = sdata->use_protection; break; case PRISM2_PARAM_PREAMBLE: diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c index df6c410de16..ba2bf8f0a34 100644 --- a/net/mac80211/ieee80211_sta.c +++ b/net/mac80211/ieee80211_sta.c @@ -316,12 +316,11 @@ static void ieee80211_sta_wmm_params(struct net_device *dev, static void ieee80211_handle_erp_ie(struct net_device *dev, u8 erp_value) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_if_sta *ifsta = &sdata->u.sta; int use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0; - if (use_protection != !!ifsta->use_protection) { + if (use_protection != sdata->use_protection) { if (net_ratelimit()) { printk(KERN_DEBUG "%s: CTS protection %s (BSSID=" MAC_FMT ")\n", @@ -329,8 +328,7 @@ static void ieee80211_handle_erp_ie(struct net_device *dev, u8 erp_value) use_protection ? "enabled" : "disabled", MAC_ARG(ifsta->bssid)); } - ifsta->use_protection = use_protection ? 1 : 0; - local->cts_protect_erp_frames = use_protection; + sdata->use_protection = use_protection; } } @@ -390,6 +388,7 @@ static void ieee80211_set_associated(struct net_device *dev, struct ieee80211_if_sta *ifsta, int assoc) { union iwreq_data wrqu; + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (ifsta->associated == assoc) return; @@ -417,6 +416,7 @@ static void ieee80211_set_associated(struct net_device *dev, ieee80211_sta_send_associnfo(dev, ifsta); } else { netif_carrier_off(dev); + sdata->use_protection = 0; memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); } wrqu.ap_addr.sa_family = ARPHRD_ETHER; -- cgit v1.2.3-70-g09d2