From bdb2b8cab4392ce41ddfbd6773a3da3334daf836 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Jun 2008 14:03:14 -0400 Subject: [SCSI] erase invalid data returned by device This patch (as1108) fixes a problem that can occur with certain USB mass-storage devices: They return invalid data together with a residue indicating that the data should be ignored. Rather than leave the invalid data in a transfer buffer, where it can get misinterpreted, the patch clears the invalid portion of the buffer. This solves a problem (wrong write-protect setting detected) reported by Maciej Rutecki and Peter Teoh. Signed-off-by: Alan Stern Tested-by: Peter Teoh Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index a82d2fe80fb..cbf55d59a54 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -207,6 +207,15 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, */ blk_execute_rq(req->q, NULL, req, 1); + /* + * Some devices (USB mass-storage in particular) may transfer + * garbage data together with a residue indicating that the data + * is invalid. Prevent the garbage from being misinterpreted + * and prevent security leaks by zeroing out the excess data. + */ + if (unlikely(req->data_len > 0 && req->data_len <= bufflen)) + memset(buffer + (bufflen - req->data_len), 0, req->data_len); + ret = req->errors; out: blk_put_request(req); -- cgit v1.2.3-70-g09d2 From 081a5bcb39b455405d58f79bb3c9398a9d4477ed Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 7 Jul 2008 11:24:06 -0500 Subject: [SCSI] mptspi: fix oops in mptspi_dv_renegotiate_work() The problem here is that if the ioc faults too early in the bring up sequence (as it usually does for an irq routing problem), ioc_reset gets called before the scsi host is even allocated. This causes an oops when it later schedules a renegotiation. Fix this by checking ioc->sh before trying to renegotiate. Cc: "Moore, Eric" Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/message/fusion/mptspi.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index 25bcfcf36f2..1effca4e40e 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -1266,13 +1266,18 @@ mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd) static int mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) { - struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); int rc; rc = mptscsih_ioc_reset(ioc, reset_phase); - if (reset_phase == MPT_IOC_POST_RESET) + /* only try to do a renegotiation if we're properly set up + * if we get an ioc fault on bringup, ioc->sh will be NULL */ + if (reset_phase == MPT_IOC_POST_RESET && + ioc->sh) { + struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); + mptspi_dv_renegotiate(hd); + } return rc; } -- cgit v1.2.3-70-g09d2 From 0ce3a7e5bd305e96c924fab1e3126480c665f017 Mon Sep 17 00:00:00 2001 From: Brian King Date: Fri, 11 Jul 2008 13:37:50 -0500 Subject: [SCSI] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices Currently, ipr does not support HDIO_GET_IDENTITY to SATA devices. An oops occurs if userspace attempts to send the command. Since hald issues the command, ensure we fail the ioctl in ipr. This is a temporary solution to the oops. Once the ipr libata EH conversion is upstream, ipr will fully support HDIO_GET_IDENTITY. Tested-by: Milton Miller Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 999e91ea745..e7a3a655442 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -71,6 +71,7 @@ #include #include #include +#include #include #include #include @@ -4913,8 +4914,11 @@ static int ipr_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) struct ipr_resource_entry *res; res = (struct ipr_resource_entry *)sdev->hostdata; - if (res && ipr_is_gata(res)) + if (res && ipr_is_gata(res)) { + if (cmd == HDIO_GET_IDENTITY) + return -ENOTTY; return ata_scsi_ioctl(sdev, cmd, arg); + } return -EINVAL; } -- cgit v1.2.3-70-g09d2 From 5ac37f87ff18843aabab84cf75b2f8504c2d81fe Mon Sep 17 00:00:00 2001 From: Michael Karcher Date: Fri, 11 Jul 2008 18:04:46 +0200 Subject: x86: fix ldt limit for 64 bit Fix size of LDT entries. On x86-64, ldt_desc is a double-sized descriptor. Signed-off-by: Michael Karcher Signed-off-by: Ingo Molnar --- include/asm-x86/desc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h index 268a012bcd7..28bddbcb38b 100644 --- a/include/asm-x86/desc.h +++ b/include/asm-x86/desc.h @@ -192,8 +192,8 @@ static inline void native_set_ldt(const void *addr, unsigned int entries) unsigned cpu = smp_processor_id(); ldt_desc ldt; - set_tssldt_descriptor(&ldt, (unsigned long)addr, - DESC_LDT, entries * sizeof(ldt) - 1); + set_tssldt_descriptor(&ldt, (unsigned long)addr, DESC_LDT, + entries * LDT_ENTRY_SIZE - 1); write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, &ldt, DESC_LDT); asm volatile("lldt %w0"::"q" (GDT_ENTRY_LDT*8)); -- cgit v1.2.3-70-g09d2 From 27898988174bb211fd962ea73b9c6dc09f888705 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 10 Jul 2008 22:10:55 -0500 Subject: [SCSI] fusion: default MSI to disabled for SPI and FC controllers There's a fault on the FC controllers that makes them not respond correctly to MSI. The SPI controllers are fine, but are likely to be onboard on older motherboards which don't handle MSI correctly, so default both these cases to disabled. Enable by setting the module parameter mpt_msi_enable=1. For the SAS case, enable MSI by default, but it can be disabled by setting the module parameter mpt_msi_enable=0. Cc: "Prakash, Sathya" Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index db3c892f87f..d40d6d15ae2 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1686,9 +1686,14 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->bus_type = SAS; } - if (ioc->bus_type == SAS && mpt_msi_enable == -1) - ioc->msi_enable = 1; - else + if (mpt_msi_enable == -1) { + /* Enable on SAS, disable on FC and SPI */ + if (ioc->bus_type == SAS) + ioc->msi_enable = 1; + else + ioc->msi_enable = 0; + } else + /* follow flag: 0 - disable; 1 - enable */ ioc->msi_enable = mpt_msi_enable; if (ioc->errata_flag_1064) -- cgit v1.2.3-70-g09d2 From 8df5fc042c8e7c08dc438c8198b62407ee1e91a0 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 7 Jul 2008 15:50:01 -0500 Subject: [SCSI] bsg: fix oops on remove If you do a modremove of any sas driver, you run into an oops on shutdown when the host is removed (coming from the host bsg device). The root cause seems to be that there's a use after free of the bsg_class_device: In bsg_kref_release_function, this is used (to do a put_device(bcg->parent) after bcg->release has been called. In sas (and possibly many other things) bcd->release frees the queue which contains the bsg_class_device, so we get a put_device on unreferenced memory. Fix this by taking a copy of the pointer to the parent before releasing bsg. Acked-by: FUJITA Tomonori Signed-off-by: James Bottomley --- block/bsg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/block/bsg.c b/block/bsg.c index f0b7cd34321..54d617f7df3 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -709,11 +709,12 @@ static void bsg_kref_release_function(struct kref *kref) { struct bsg_class_device *bcd = container_of(kref, struct bsg_class_device, ref); + struct device *parent = bcd->parent; if (bcd->release) bcd->release(bcd->parent); - put_device(bcd->parent); + put_device(parent); } static int bsg_put_device(struct bsg_device *bd) -- cgit v1.2.3-70-g09d2 From 43f77e91eadbc290eb76a08110a039c809dde6c9 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Sat, 12 Jul 2008 13:47:49 -0700 Subject: drivers/char/pcmcia/ipwireless/hardware.c fix resource leak Coverity CID: 2172 RESOURCE_LEAK When pool_allocate() tries to enlarge a packet, if it can not allocate enough memory, it returns NULL without first freeing the old packet. This patch just frees the packet first. Signed-off-by: Darren Jenkins Acked-by: Jiri Kosina Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/pcmcia/ipwireless/hardware.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c index ba6340ae98a..929101ecbae 100644 --- a/drivers/char/pcmcia/ipwireless/hardware.c +++ b/drivers/char/pcmcia/ipwireless/hardware.c @@ -590,8 +590,10 @@ static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw, packet = kmalloc(sizeof(struct ipw_rx_packet) + old_packet->length + minimum_free_space, GFP_ATOMIC); - if (!packet) + if (!packet) { + kfree(old_packet); return NULL; + } memcpy(packet, old_packet, sizeof(struct ipw_rx_packet) + old_packet->length); -- cgit v1.2.3-70-g09d2 From 4fc89e3911aa5357b55b85b60c4beaeb8a48a290 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Sat, 12 Jul 2008 13:47:50 -0700 Subject: drivers/isdn/i4l/isdn_common.c fix small resource leak Coverity CID: 1356 RESOURCE_LEAK I found a very old patch for this that was Acked but did not get applied https://lists.linux-foundation.org/pipermail/kernel-janitors/2006-September/016362.html There looks to be a small leak in isdn_writebuf_stub() in isdn_common.c, when copy_from_user() returns an un-copied data length (length != 0). The below patch should be a minimally invasive fix. Signed-off-by: Darren Jenkins Acked-by: Karsten Keil Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/isdn/i4l/isdn_common.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c index 0f3c66de69b..8d8c6b73616 100644 --- a/drivers/isdn/i4l/isdn_common.c +++ b/drivers/isdn/i4l/isdn_common.c @@ -1977,8 +1977,10 @@ isdn_writebuf_stub(int drvidx, int chan, const u_char __user * buf, int len) if (!skb) return -ENOMEM; skb_reserve(skb, hl); - if (copy_from_user(skb_put(skb, len), buf, len)) + if (copy_from_user(skb_put(skb, len), buf, len)) { + dev_kfree_skb(skb); return -EFAULT; + } ret = dev->drv[drvidx]->interface->writebuf_skb(drvidx, chan, 1, skb); if (ret <= 0) dev_kfree_skb(skb); -- cgit v1.2.3-70-g09d2 From f31ad92f34913043cf008d6e479e92dfbaf02df1 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Sat, 12 Jul 2008 13:47:51 -0700 Subject: fbdev: bugfix for multiprocess defio This patch is a bugfix for how defio handles multiple processes manipulating the same framebuffer. Thanks to Bernard Blackham for identifying this bug. It occurs when two applications mmap the same framebuffer and concurrently write to the same page. Normally, this doesn't occur since only a single process mmaps the framebuffer. The symptom of the bug is that the mapping applications will hang. The cause is that defio incorrectly tries to add the same page twice to the pagelist. The solution I have is to walk the pagelist and check for a duplicate before adding. Since I needed to walk the pagelist, I now also keep the pagelist in sorted order. Signed-off-by: Jaya Kumar Cc: Bernard Blackham Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/fb_defio.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c index 24843fdd539..59df132cc37 100644 --- a/drivers/video/fb_defio.c +++ b/drivers/video/fb_defio.c @@ -74,6 +74,7 @@ static int fb_deferred_io_mkwrite(struct vm_area_struct *vma, { struct fb_info *info = vma->vm_private_data; struct fb_deferred_io *fbdefio = info->fbdefio; + struct page *cur; /* this is a callback we get when userspace first tries to write to the page. we schedule a workqueue. that workqueue @@ -83,7 +84,24 @@ static int fb_deferred_io_mkwrite(struct vm_area_struct *vma, /* protect against the workqueue changing the page list */ mutex_lock(&fbdefio->lock); - list_add(&page->lru, &fbdefio->pagelist); + + /* we loop through the pagelist before adding in order + to keep the pagelist sorted */ + list_for_each_entry(cur, &fbdefio->pagelist, lru) { + /* this check is to catch the case where a new + process could start writing to the same page + through a new pte. this new access can cause the + mkwrite even when the original ps's pte is marked + writable */ + if (unlikely(cur == page)) + goto page_already_added; + else if (cur->index > page->index) + break; + } + + list_add_tail(&page->lru, &cur->lru); + +page_already_added: mutex_unlock(&fbdefio->lock); /* come back after delay to process the deferred IO */ -- cgit v1.2.3-70-g09d2 From 05d81d2222beec7b63ac8c1c8cdb5bb4f82c2bad Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 12 Jul 2008 13:47:53 -0700 Subject: serial8250: sanity check nr_uarts on all paths. I had 8250.nr_uarts=16 in the boot line of a test kernel and I had a weird mysterious crash in sysfs. After taking an in-depth look I realized that CONFIG_SERIAL_8250_NR_UARTS was set to 4 and I was walking off the end of the serial8250_ports array. Ouch!!! Don't let this happen to someone else. Signed-off-by: Eric W. Biederman Acked-by: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 1bc00b721e9..be95e55b228 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2623,6 +2623,9 @@ static struct console serial8250_console = { static int __init serial8250_console_init(void) { + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; + serial8250_isa_init_ports(); register_console(&serial8250_console); return 0; -- cgit v1.2.3-70-g09d2 From bca5c2c550f16d2dc2d21ffb7b4712bd0a7d32a9 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Sat, 12 Jul 2008 13:47:54 -0700 Subject: ov7670: clean up ov7670_read semantics Cortland Setlow pointed out a bug in ov7670.c where the result from ov7670_read() was just being checked for !0, rather than <0. This made me realize that ov7670_read's semantics were rather confusing; it both fills in 'value' with the result, and returns it. This is goes against general kernel convention; so rather than fixing callers, let's fix the function. This makes ov7670_read return <0 in the case of an error, and 0 upon success. Thus, code like: res = ov7670_read(...); if (!res) goto error; ..will work properly. Signed-off-by: Cortland Setlow Signed-off-by: Andres Salomon Acked-by: Jonathan Corbet Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/media/video/ov7670.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c index 2bc6bdc9c1f..d7bfd30f74a 100644 --- a/drivers/media/video/ov7670.c +++ b/drivers/media/video/ov7670.c @@ -406,8 +406,10 @@ static int ov7670_read(struct i2c_client *c, unsigned char reg, int ret; ret = i2c_smbus_read_byte_data(c, reg); - if (ret >= 0) + if (ret >= 0) { *value = (unsigned char) ret; + ret = 0; + } return ret; } -- cgit v1.2.3-70-g09d2 From 876550aa3e5f6448a1abae3704cbebcc50545998 Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Sat, 12 Jul 2008 13:47:55 -0700 Subject: rtc-fm3130: fix chip naming Fix chip naming from fm3031-rtc to fm3031 Signed-off-by: Alessandro Zummo Cc: Sergey Lapin Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-fm3130.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c index 11644c8fca8..abfdfcbaa05 100644 --- a/drivers/rtc/rtc-fm3130.c +++ b/drivers/rtc/rtc-fm3130.c @@ -55,7 +55,7 @@ struct fm3130 { int alarm; }; static const struct i2c_device_id fm3130_id[] = { - { "fm3130-rtc", 0 }, + { "fm3130", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, fm3130_id); -- cgit v1.2.3-70-g09d2 From 8ea9212cbd65db749543ec619e32fdff9a8b3408 Mon Sep 17 00:00:00 2001 From: Jon Smirl Date: Sat, 12 Jul 2008 13:47:56 -0700 Subject: rtc-pcf8563: add chip id Add the rtc8564 chip entry Signed-off-by: Jon Smirl Signed-off-by: Alessandro Zummo Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf8563.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c index 0fc4c363078..748a502a635 100644 --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -302,6 +302,7 @@ static int pcf8563_remove(struct i2c_client *client) static const struct i2c_device_id pcf8563_id[] = { { "pcf8563", 0 }, + { "rtc8564", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, pcf8563_id); -- cgit v1.2.3-70-g09d2 From d1a5d1979702cc57b9b80f636426ec7ad1655cad Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Sat, 12 Jul 2008 13:47:57 -0700 Subject: OProfile kernel maintainership changes Cc: Philippe Elie Cc: John Levon Cc: Maynard Johnson Cc: Richard Purdie Cc: Daniel Hansel Cc: Jason Yeh Cc: Andrew Morton Signed-off-by: Robert Richter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 6476125363e..56a2f678019 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3082,8 +3082,8 @@ L: linux-scsi@vger.kernel.org S: Maintained OPROFILE -P: Philippe Elie -M: phil.el@wanadoo.fr +P: Robert Richter +M: robert.richter@amd.com L: oprofile-list@lists.sf.net S: Maintained -- cgit v1.2.3-70-g09d2 From d3297a644a0ab784e0c810ceca6bf35a67868ad9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 12 Jul 2008 13:47:58 -0700 Subject: frv: fix irqs_disabled() to return an int, not an unsigned long Fix FRV irqs_disabled() to return an int, not an unsigned long to avoid this warning: kernel/sched.c: In function '__might_sleep': kernel/sched.c:8198: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-frv/system.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h index d3a12a9079f..7742ec000cc 100644 --- a/include/asm-frv/system.h +++ b/include/asm-frv/system.h @@ -87,7 +87,7 @@ do { \ } while(0) #define irqs_disabled() \ - ({unsigned long flags; local_save_flags(flags); flags; }) + ({unsigned long flags; local_save_flags(flags); !!flags; }) #define local_irq_save(flags) \ do { \ -- cgit v1.2.3-70-g09d2 From e911d0cc877ff027d5bd09fc33148ab76f0fdf0e Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 12 Jul 2008 13:47:59 -0700 Subject: cifs: fix inode leak in cifs_get_inode_info_unix Try this: mount a share with unix extensions create a file on it umount the share You'll get the following message in the ring buffer: VFS: Busy inodes after unmount of cifs. Self-destruct in 5 seconds. Have a nice day... ...the problem is that cifs_get_inode_info_unix is creating and hashing a new inode even when it's going to return error anyway. The first lookup when creating a file returns an error so we end up leaking this inode before we do the actual create. This appears to be a regression caused by commit 0e4bbde94fdc33f5b3d793166b21bf768ca3e098. The following patch seems to fix it for me, and fixes a minor formatting nit as well. Signed-off-by: Jeff Layton Acked-by: Steven French Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/cifs/inode.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 722be543cee..2e904bd111c 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -219,15 +219,15 @@ int cifs_get_inode_info_unix(struct inode **pinode, rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &find_data, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); - if (rc) { - if (rc == -EREMOTE && !is_dfs_referral) { - is_dfs_referral = true; - cFYI(DBG2, ("DFS ref")); - /* for DFS, server does not give us real inode data */ - fill_fake_finddataunix(&find_data, sb); - rc = 0; - } - } + if (rc == -EREMOTE && !is_dfs_referral) { + is_dfs_referral = true; + cFYI(DBG2, ("DFS ref")); + /* for DFS, server does not give us real inode data */ + fill_fake_finddataunix(&find_data, sb); + rc = 0; + } else if (rc) + goto cgiiu_exit; + num_of_bytes = le64_to_cpu(find_data.NumOfBytes); end_of_file = le64_to_cpu(find_data.EndOfFile); @@ -236,7 +236,7 @@ int cifs_get_inode_info_unix(struct inode **pinode, *pinode = new_inode(sb); if (*pinode == NULL) { rc = -ENOMEM; - goto cgiiu_exit; + goto cgiiu_exit; } /* Is an i_ino of zero legal? */ /* note ino incremented to unique num in new_inode */ -- cgit v1.2.3-70-g09d2 From 536abdb0802f3fac1b217530741853843d63c281 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 12 Jul 2008 13:48:00 -0700 Subject: cifs: fix wksidarr declaration to be big-endian friendly The current definition of wksidarr works fine on little endian arches (since cpu_to_le32 is a no-op there), but on big-endian arches, it fails to compile with this error: error: braced-group within expression allowed only inside a function The problem is that this static declaration has cpu_to_le32 embedded within it, and that expands into a function macro. We need to use __constant_cpu_to_le32() instead. Signed-off-by: Jeff Layton Cc: Steven French Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/cifs/cifsacl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index 34902cff540..0e9fc2ba90e 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -34,11 +34,11 @@ static struct cifs_wksid wksidarr[NUM_WK_SIDS] = { {{1, 0, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0} }, "null user"}, {{1, 1, {0, 0, 0, 0, 0, 1}, {0, 0, 0, 0, 0} }, "nobody"}, - {{1, 1, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(11), 0, 0, 0, 0} }, "net-users"}, - {{1, 1, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(18), 0, 0, 0, 0} }, "sys"}, - {{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(544), 0, 0, 0} }, "root"}, - {{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(545), 0, 0, 0} }, "users"}, - {{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(546), 0, 0, 0} }, "guest"} } + {{1, 1, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(11), 0, 0, 0, 0} }, "net-users"}, + {{1, 1, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(18), 0, 0, 0, 0} }, "sys"}, + {{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(544), 0, 0, 0} }, "root"}, + {{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(545), 0, 0, 0} }, "users"}, + {{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(546), 0, 0, 0} }, "guest"} } ; -- cgit v1.2.3-70-g09d2 From 3e84050c81ffb4961ef43d20e1fb1d7607167d83 Mon Sep 17 00:00:00 2001 From: Dmitry Adamushko Date: Sun, 13 Jul 2008 02:10:29 +0200 Subject: cpusets, hotplug, scheduler: fix scheduler domain breakage Commit f18f982ab ("sched: CPU hotplug events must not destroy scheduler domains created by the cpusets") introduced a hotplug-related problem as described below: Upon CPU_DOWN_PREPARE, update_sched_domains() -> detach_destroy_domains(&cpu_online_map) does the following: /* * Force a reinitialization of the sched domains hierarchy. The domains * and groups cannot be updated in place without racing with the balancing * code, so we temporarily attach all running cpus to the NULL domain * which will prevent rebalancing while the sched domains are recalculated. */ The sched-domains should be rebuilt when a CPU_DOWN ops. has been completed, effectively either upon CPU_DEAD{_FROZEN} (upon success) or CPU_DOWN_FAILED{_FROZEN} (upon failure -- restore the things to their initial state). That's what update_sched_domains() also does but only for !CPUSETS case. With f18f982ab, sched-domains' reinitialization is delegated to CPUSETS code: cpuset_handle_cpuhp() -> common_cpu_mem_hotplug_unplug() -> rebuild_sched_domains() Being called for CPU_UP_PREPARE and if its callback is called after update_sched_domains()), it just negates all the work done by update_sched_domains() -- i.e. a soon-to-be-offline cpu is included in the sched-domains and that makes it visible for the load-balancer while the CPU_DOWN ops. is in progress. __migrate_live_tasks() moves the tasks off a 'dead' cpu (it's already "offline" when this function is called). try_to_wake_up() is called for one of these tasks from another CPU -> the load-balancer (wake_idle()) picks up a "dead" CPU and places the task on it. Then e.g. BUG_ON(rq->nr_running) detects this a bit later -> oops. Signed-off-by: Dmitry Adamushko Tested-by: Vegard Nossum Cc: Paul Menage Cc: Max Krasnyansky Cc: Paul Jackson Cc: Peter Zijlstra Cc: miaox@cn.fujitsu.com Cc: rostedt@goodmis.org Cc: Linus Torvalds Signed-off-by: Ingo Molnar --- kernel/cpuset.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 9fceb97e989..798b3ab054e 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1882,7 +1882,7 @@ static void scan_for_empty_cpusets(const struct cpuset *root) * in order to minimize text size. */ -static void common_cpu_mem_hotplug_unplug(void) +static void common_cpu_mem_hotplug_unplug(int rebuild_sd) { cgroup_lock(); @@ -1894,7 +1894,8 @@ static void common_cpu_mem_hotplug_unplug(void) * Scheduler destroys domains on hotplug events. * Rebuild them based on the current settings. */ - rebuild_sched_domains(); + if (rebuild_sd) + rebuild_sched_domains(); cgroup_unlock(); } @@ -1912,11 +1913,22 @@ static void common_cpu_mem_hotplug_unplug(void) static int cpuset_handle_cpuhp(struct notifier_block *unused_nb, unsigned long phase, void *unused_cpu) { - if (phase == CPU_DYING || phase == CPU_DYING_FROZEN) + switch (phase) { + case CPU_UP_CANCELED: + case CPU_UP_CANCELED_FROZEN: + case CPU_DOWN_FAILED: + case CPU_DOWN_FAILED_FROZEN: + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + case CPU_DEAD: + case CPU_DEAD_FROZEN: + common_cpu_mem_hotplug_unplug(1); + break; + default: return NOTIFY_DONE; + } - common_cpu_mem_hotplug_unplug(); - return 0; + return NOTIFY_OK; } #ifdef CONFIG_MEMORY_HOTPLUG @@ -1929,7 +1941,7 @@ static int cpuset_handle_cpuhp(struct notifier_block *unused_nb, void cpuset_track_online_nodes(void) { - common_cpu_mem_hotplug_unplug(); + common_cpu_mem_hotplug_unplug(0); } #endif -- cgit v1.2.3-70-g09d2 From 0302c01b4b793cfbc5c7bf8723f6d14bf9bd7cf4 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sun, 13 Jul 2008 12:13:59 -0700 Subject: Documentation/HOWTO: correct wrong kernel bugzilla FAQ URL Signed-off-by: Jiri Pirko Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/HOWTO | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/HOWTO b/Documentation/HOWTO index 0291ade44c1..619e8caf30d 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -377,7 +377,7 @@ Bug Reporting bugzilla.kernel.org is where the Linux kernel developers track kernel bugs. Users are encouraged to report all bugs that they find in this tool. For details on how to use the kernel bugzilla, please see: - http://test.kernel.org/bugzilla/faq.html + http://bugzilla.kernel.org/page.cgi?id=faq.html The file REPORTING-BUGS in the main kernel source directory has a good template for how to report a possible kernel bug, and details what kind -- cgit v1.2.3-70-g09d2 From 17d213f806dad629e9af36fc45f082b87ed7bceb Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sun, 13 Jul 2008 12:14:02 -0700 Subject: devcgroup: always show positive major/minor num # echo "b $((0x7fffffff)):$((0x80000000)) rwm" > devices.allow # cat devices.list b 214748364:-21474836 rwm though a major/minor number of 0x800000000 is meaningless, we should not cast it to a negative value. Signed-off-by: Li Zefan Acked-by: Serge Hallyn Cc: Serge Hallyn Cc: Paul Menage Cc: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- security/device_cgroup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/security/device_cgroup.c b/security/device_cgroup.c index fd764a0858d..1e2e28afba4 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -222,7 +222,7 @@ static void devcgroup_destroy(struct cgroup_subsys *ss, #define DEVCG_DENY 2 #define DEVCG_LIST 3 -#define MAJMINLEN 10 +#define MAJMINLEN 13 #define ACCLEN 4 static void set_access(char *acc, short access) @@ -254,7 +254,7 @@ static void set_majmin(char *str, unsigned m) if (m == ~0) sprintf(str, "*"); else - snprintf(str, MAJMINLEN, "%d", m); + snprintf(str, MAJMINLEN, "%u", m); } static int devcgroup_seq_read(struct cgroup *cgroup, struct cftype *cft, -- cgit v1.2.3-70-g09d2 From ec229e830060091b9be63c8f873c1b2407a82821 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sun, 13 Jul 2008 12:14:04 -0700 Subject: devcgroup: fix permission check when adding entry to child cgroup # cat devices.list c 1:3 r # echo 'c 1:3 w' > sub/devices.allow # cat sub/devices.list c 1:3 w As illustrated, the parent group has no write permission to /dev/null, so it's child should not be allowed to add this write permission. Signed-off-by: Li Zefan Acked-by: Serge Hallyn Cc: Serge Hallyn Cc: Paul Menage Cc: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- security/device_cgroup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 1e2e28afba4..ddd92cec78e 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -300,7 +300,7 @@ static int may_access_whitelist(struct dev_cgroup *c, continue; if (whitem->minor != ~0 && whitem->minor != refwh->minor) continue; - if (refwh->access & (~(whitem->access | ACC_MASK))) + if (refwh->access & (~whitem->access)) continue; return 1; } -- cgit v1.2.3-70-g09d2 From bce7f793daec3e65ec5c5705d2457b81fe7b5725 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 13 Jul 2008 14:51:29 -0700 Subject: Linux 2.6.26 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 6315424a00b..e3c5eb66ec5 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc9 +EXTRAVERSION = NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v1.2.3-70-g09d2