From d9621176872319a568d9892701410bcbfbd5b35c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 2 Jan 2013 22:30:56 +0100 Subject: ARM: nomadik: bump the IRQ numbers again Bump the IRQ numbers from offset at 1 (right above NO_IRQ) to 32. This is the painful way to learn that if you're using SPARSE_IRQ and avoid to define .nr_irqs in your machine, the first 16 IRQs will be pre-allocated, and the IRQdomain code (as the VIC core code before it) will then assume that all IRQ descriptors are pre-allocated, and 16 of them are - by somebody else. So mapping the IRQs will fail in irq_create_mapping(). Moving the offset upward rids us of this problem. Cc: Rob Herring Cc: Grant Likely Signed-off-by: Linus Walleij --- arch/arm/mach-nomadik/include/mach/irqs.h | 78 +++++++++++++++---------------- 1 file changed, 39 insertions(+), 39 deletions(-) diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h index b549d057154..215f8cdb400 100644 --- a/arch/arm/mach-nomadik/include/mach/irqs.h +++ b/arch/arm/mach-nomadik/include/mach/irqs.h @@ -22,49 +22,49 @@ #include -#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */ +#define IRQ_VIC_START 32 /* first VIC interrupt is 1 */ /* * Interrupt numbers generic for all Nomadik Chip cuts */ -#define IRQ_WATCHDOG 1 -#define IRQ_SOFTINT 2 -#define IRQ_CRYPTO 3 -#define IRQ_OWM 4 -#define IRQ_MTU0 5 -#define IRQ_MTU1 6 -#define IRQ_GPIO0 7 -#define IRQ_GPIO1 8 -#define IRQ_GPIO2 9 -#define IRQ_GPIO3 10 -#define IRQ_RTC_RTT 11 -#define IRQ_SSP 12 -#define IRQ_UART0 13 -#define IRQ_DMA1 14 -#define IRQ_CLCD_MDIF 15 -#define IRQ_DMA0 16 -#define IRQ_PWRFAIL 17 -#define IRQ_UART1 18 -#define IRQ_FIRDA 19 -#define IRQ_MSP0 20 -#define IRQ_I2C0 21 -#define IRQ_I2C1 22 -#define IRQ_SDMMC 23 -#define IRQ_USBOTG 24 -#define IRQ_SVA_IT0 25 -#define IRQ_SVA_IT1 26 -#define IRQ_SAA_IT0 27 -#define IRQ_SAA_IT1 28 -#define IRQ_UART2 29 -#define IRQ_MSP2 30 -#define IRQ_L2CC 49 -#define IRQ_HPI 50 -#define IRQ_SKE 51 -#define IRQ_KP 52 -#define IRQ_MEMST 55 -#define IRQ_SGA_IT 59 -#define IRQ_USBM 61 -#define IRQ_MSP1 63 +#define IRQ_WATCHDOG (IRQ_VIC_START+0) +#define IRQ_SOFTINT (IRQ_VIC_START+1) +#define IRQ_CRYPTO (IRQ_VIC_START+2) +#define IRQ_OWM (IRQ_VIC_START+3) +#define IRQ_MTU0 (IRQ_VIC_START+4) +#define IRQ_MTU1 (IRQ_VIC_START+5) +#define IRQ_GPIO0 (IRQ_VIC_START+6) +#define IRQ_GPIO1 (IRQ_VIC_START+7) +#define IRQ_GPIO2 (IRQ_VIC_START+8) +#define IRQ_GPIO3 (IRQ_VIC_START+9) +#define IRQ_RTC_RTT (IRQ_VIC_START+10) +#define IRQ_SSP (IRQ_VIC_START+11) +#define IRQ_UART0 (IRQ_VIC_START+12) +#define IRQ_DMA1 (IRQ_VIC_START+13) +#define IRQ_CLCD_MDIF (IRQ_VIC_START+14) +#define IRQ_DMA0 (IRQ_VIC_START+15) +#define IRQ_PWRFAIL (IRQ_VIC_START+16) +#define IRQ_UART1 (IRQ_VIC_START+17) +#define IRQ_FIRDA (IRQ_VIC_START+18) +#define IRQ_MSP0 (IRQ_VIC_START+19) +#define IRQ_I2C0 (IRQ_VIC_START+20) +#define IRQ_I2C1 (IRQ_VIC_START+21) +#define IRQ_SDMMC (IRQ_VIC_START+22) +#define IRQ_USBOTG (IRQ_VIC_START+23) +#define IRQ_SVA_IT0 (IRQ_VIC_START+24) +#define IRQ_SVA_IT1 (IRQ_VIC_START+25) +#define IRQ_SAA_IT0 (IRQ_VIC_START+26) +#define IRQ_SAA_IT1 (IRQ_VIC_START+27) +#define IRQ_UART2 (IRQ_VIC_START+28) +#define IRQ_MSP2 (IRQ_VIC_START+29) +#define IRQ_L2CC (IRQ_VIC_START+30) +#define IRQ_HPI (IRQ_VIC_START+31) +#define IRQ_SKE (IRQ_VIC_START+32) +#define IRQ_KP (IRQ_VIC_START+33) +#define IRQ_MEMST (IRQ_VIC_START+34) +#define IRQ_SGA_IT (IRQ_VIC_START+35) +#define IRQ_USBM (IRQ_VIC_START+36) +#define IRQ_MSP1 (IRQ_VIC_START+37) #define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64) -- cgit v1.2.3-70-g09d2