From dd6f01b5ccba602cf0790bc44cc4429013373719 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 6 Feb 2012 13:10:11 +0900 Subject: ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/ This patch moves S3C2440 stuff into mach-s3c24xx/ directory so that we can merge the s3c24 series' directories to the just one mach-s3c24xx/ directory. And this patch is including following. - re-ordered alphabetically by option text at Kconfig and Makefile Cc: Ben Dooks Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2440/Kconfig | 165 ------ arch/arm/mach-s3c2440/Makefile | 26 +- arch/arm/mach-s3c2440/clock.c | 194 ------- arch/arm/mach-s3c2440/common.h | 17 - arch/arm/mach-s3c2440/dma.c | 196 ------- arch/arm/mach-s3c2440/include/mach/gta02.h | 84 --- arch/arm/mach-s3c2440/irq.c | 128 ----- arch/arm/mach-s3c2440/mach-anubis.c | 491 ----------------- arch/arm/mach-s3c2440/mach-at2440evb.c | 226 -------- arch/arm/mach-s3c2440/mach-gta02.c | 605 --------------------- arch/arm/mach-s3c2440/mach-mini2440.c | 705 ------------------------ arch/arm/mach-s3c2440/mach-nexcoder.c | 162 ------ arch/arm/mach-s3c2440/mach-osiris-dvs.c | 194 ------- arch/arm/mach-s3c2440/mach-osiris.c | 440 --------------- arch/arm/mach-s3c2440/mach-rx1950.c | 826 ----------------------------- arch/arm/mach-s3c2440/mach-rx3715.c | 217 -------- arch/arm/mach-s3c2440/mach-smdk2440.c | 187 ------- arch/arm/mach-s3c2440/s3c2440.c | 88 --- arch/arm/mach-s3c2440/s3c2442.c | 188 ------- arch/arm/mach-s3c2440/s3c244x-clock.c | 141 ----- arch/arm/mach-s3c2440/s3c244x-irq.c | 142 ----- arch/arm/mach-s3c2440/s3c244x.c | 198 ------- arch/arm/mach-s3c24xx/Kconfig | 169 +++++- arch/arm/mach-s3c24xx/Makefile | 17 + arch/arm/mach-s3c24xx/clock-s3c2440.c | 194 +++++++ arch/arm/mach-s3c24xx/clock-s3c244x.c | 141 +++++ arch/arm/mach-s3c24xx/common.h | 6 + arch/arm/mach-s3c24xx/dma-s3c2440.c | 196 +++++++ arch/arm/mach-s3c24xx/include/mach/gta02.h | 84 +++ arch/arm/mach-s3c24xx/irq-s3c2440.c | 128 +++++ arch/arm/mach-s3c24xx/irq-s3c244x.c | 142 +++++ arch/arm/mach-s3c24xx/mach-anubis.c | 491 +++++++++++++++++ arch/arm/mach-s3c24xx/mach-at2440evb.c | 226 ++++++++ arch/arm/mach-s3c24xx/mach-gta02.c | 605 +++++++++++++++++++++ arch/arm/mach-s3c24xx/mach-mini2440.c | 705 ++++++++++++++++++++++++ arch/arm/mach-s3c24xx/mach-nexcoder.c | 162 ++++++ arch/arm/mach-s3c24xx/mach-osiris-dvs.c | 194 +++++++ arch/arm/mach-s3c24xx/mach-osiris.c | 440 +++++++++++++++ arch/arm/mach-s3c24xx/mach-rx1950.c | 826 +++++++++++++++++++++++++++++ arch/arm/mach-s3c24xx/mach-rx3715.c | 217 ++++++++ arch/arm/mach-s3c24xx/mach-smdk2440.c | 187 +++++++ arch/arm/mach-s3c24xx/s3c2440.c | 88 +++ arch/arm/mach-s3c24xx/s3c2442.c | 188 +++++++ arch/arm/mach-s3c24xx/s3c244x.c | 198 +++++++ 44 files changed, 5603 insertions(+), 5621 deletions(-) delete mode 100644 arch/arm/mach-s3c2440/clock.c delete mode 100644 arch/arm/mach-s3c2440/common.h delete mode 100644 arch/arm/mach-s3c2440/dma.c delete mode 100644 arch/arm/mach-s3c2440/include/mach/gta02.h delete mode 100644 arch/arm/mach-s3c2440/irq.c delete mode 100644 arch/arm/mach-s3c2440/mach-anubis.c delete mode 100644 arch/arm/mach-s3c2440/mach-at2440evb.c delete mode 100644 arch/arm/mach-s3c2440/mach-gta02.c delete mode 100644 arch/arm/mach-s3c2440/mach-mini2440.c delete mode 100644 arch/arm/mach-s3c2440/mach-nexcoder.c delete mode 100644 arch/arm/mach-s3c2440/mach-osiris-dvs.c delete mode 100644 arch/arm/mach-s3c2440/mach-osiris.c delete mode 100644 arch/arm/mach-s3c2440/mach-rx1950.c delete mode 100644 arch/arm/mach-s3c2440/mach-rx3715.c delete mode 100644 arch/arm/mach-s3c2440/mach-smdk2440.c delete mode 100644 arch/arm/mach-s3c2440/s3c2440.c delete mode 100644 arch/arm/mach-s3c2440/s3c2442.c delete mode 100644 arch/arm/mach-s3c2440/s3c244x-clock.c delete mode 100644 arch/arm/mach-s3c2440/s3c244x-irq.c delete mode 100644 arch/arm/mach-s3c2440/s3c244x.c create mode 100644 arch/arm/mach-s3c24xx/clock-s3c2440.c create mode 100644 arch/arm/mach-s3c24xx/clock-s3c244x.c create mode 100644 arch/arm/mach-s3c24xx/dma-s3c2440.c create mode 100644 arch/arm/mach-s3c24xx/include/mach/gta02.h create mode 100644 arch/arm/mach-s3c24xx/irq-s3c2440.c create mode 100644 arch/arm/mach-s3c24xx/irq-s3c244x.c create mode 100644 arch/arm/mach-s3c24xx/mach-anubis.c create mode 100644 arch/arm/mach-s3c24xx/mach-at2440evb.c create mode 100644 arch/arm/mach-s3c24xx/mach-gta02.c create mode 100644 arch/arm/mach-s3c24xx/mach-mini2440.c create mode 100644 arch/arm/mach-s3c24xx/mach-nexcoder.c create mode 100644 arch/arm/mach-s3c24xx/mach-osiris-dvs.c create mode 100644 arch/arm/mach-s3c24xx/mach-osiris.c create mode 100644 arch/arm/mach-s3c24xx/mach-rx1950.c create mode 100644 arch/arm/mach-s3c24xx/mach-rx3715.c create mode 100644 arch/arm/mach-s3c24xx/mach-smdk2440.c create mode 100644 arch/arm/mach-s3c24xx/s3c2440.c create mode 100644 arch/arm/mach-s3c24xx/s3c2442.c create mode 100644 arch/arm/mach-s3c24xx/s3c244x.c diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 914e620f125..ece7a10fe3c 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -2,35 +2,6 @@ # # Licensed under GPLv2 -config CPU_S3C2440 - bool - select CPU_ARM920T - select S3C2410_CLOCK - select S3C2410_PM if PM - select S3C2440_DMA if S3C2410_DMA - select CPU_S3C244X - select CPU_LLSERIAL_S3C2440 - help - Support for S3C2440 Samsung Mobile CPU based systems. - -config CPU_S3C2442 - bool - select CPU_ARM920T - select S3C2410_CLOCK - select S3C2410_PM if PM - select CPU_S3C244X - select CPU_LLSERIAL_S3C2440 - help - Support for S3C2442 Samsung Mobile CPU based systems. - -config CPU_S3C244X - bool - depends on CPU_S3C2440 || CPU_S3C2442 - help - Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. - - - config S3C2440_CPUFREQ bool "S3C2440/S3C2442 CPU Frequency scaling support" depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) @@ -64,139 +35,3 @@ config S3C2440_PLL_16934400 default y if CPU_FREQ_S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. - -config S3C2440_DMA - bool - depends on CPU_S3C2440 - help - Support for S3C2440 specific DMA code5A - -menu "S3C2440 and S3C2442 Machines" - -config MACH_ANUBIS - bool "Simtec Electronics ANUBIS" - select CPU_S3C2440 - select S3C24XX_DCLK - select PM_SIMTEC if PM - select HAVE_PATA_PLATFORM - select S3C24XX_GPIO_EXTRA64 - select S3C2440_XTAL_12000000 - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Simtec Electronics ANUBIS - development system - -config MACH_NEO1973_GTA02 - bool "Openmoko GTA02 / Freerunner phone" - select CPU_S3C2442 - select MFD_PCF50633 - select PCF50633_GPIO - select I2C - select POWER_SUPPLY - select MACH_NEO1973 - select S3C2410_PWM - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone - -config MACH_OSIRIS - bool "Simtec IM2440D20 (OSIRIS) module" - select CPU_S3C2440 - select S3C24XX_DCLK - select PM_SIMTEC if PM - select S3C24XX_GPIO_EXTRA128 - select S3C2440_XTAL_12000000 - select S3C2410_IOTIMING if S3C2440_CPUFREQ - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Simtec IM2440D20 module, also - known as the Osiris. - -config MACH_OSIRIS_DVS - tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" - depends on MACH_OSIRIS - select TPS65010 - help - Say Y/M here if you want to have dynamic voltage scaling support - on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. - - The DVS driver alters the voltage supplied to the ARM core - depending on the frequency it is running at. The driver itself - does not do any of the frequency alteration, which is left up - to the cpufreq driver. - -config MACH_RX3715 - bool "HP iPAQ rx3715" - select CPU_S3C2440 - select S3C2440_XTAL_16934400 - select PM_H1940 if PM - select S3C_DEV_NAND - help - Say Y here if you are using the HP iPAQ rx3715. - -config ARCH_S3C2440 - bool "SMDK2440" - select CPU_S3C2440 - select S3C2440_XTAL_16934400 - select MACH_SMDK - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the SMDK2440. - -config MACH_NEXCODER_2440 - bool "NexVision NEXCODER 2440 Light Board" - select CPU_S3C2440 - select S3C2440_XTAL_12000000 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board - -config SMDK2440_CPU2440 - bool "SMDK2440 with S3C2440 CPU module" - default y if ARCH_S3C2440 - select S3C2440_XTAL_16934400 - select CPU_S3C2440 - -config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 CPU module" - select CPU_S3C2442 - -config MACH_AT2440EVB - bool "Avantech AT2440EVB development board" - select CPU_S3C2440 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the AT2440EVB development board - -config MACH_MINI2440 - bool "MINI2440 development board" - select CPU_S3C2440 - select EEPROM_AT24 - select NEW_LEDS - select LEDS_CLASS - select LEDS_TRIGGER - select LEDS_TRIGGER_BACKLIGHT - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here to select support for the MINI2440. Is a 10cm x 10cm board - available via various sources. It can come with a 3.5" or 7" touch LCD. - -config MACH_RX1950 - bool "HP iPAQ rx1950" - select CPU_S3C2442 - select S3C24XX_DCLK - select PM_H1940 if PM - select I2C - select S3C2410_PWM - select S3C_DEV_NAND - select S3C2410_IOTIMING if S3C2440_CPUFREQ - select S3C2440_XTAL_16934400 - help - Say Y here if you're using HP iPAQ rx1950 - -endmenu diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile index d5440fa34b0..c4609243981 100644 --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile @@ -9,33 +9,9 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o -obj-$(CONFIG_CPU_S3C2442) += s3c2442.o +obj-$(CONFIG_CPU_S3C2440) += dsc.o -obj-$(CONFIG_CPU_S3C2440) += irq.o -obj-$(CONFIG_CPU_S3C2440) += clock.o -obj-$(CONFIG_S3C2440_DMA) += dma.o - -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o - -# Machine support - -obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o -obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o -obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o -obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o -obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o -obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o -obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o -obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o -obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o - -# extra machine support - -obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c deleted file mode 100644 index bedbc87a342..00000000000 --- a/arch/arm/mach-s3c2440/clock.c +++ /dev/null @@ -1,194 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/clock.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2440 Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include -#include -#include - -/* S3C2440 extended clock support */ - -static unsigned long s3c2440_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div = (parent_rate / rate) / 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2440_camif_upll_round(clk, rate); - - camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK); - - if (rate != parent_rate) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -/* Extra S3C2440 clocks */ - -static struct clk s3c2440_clk_cam = { - .name = "camif", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2440_clk_cam_upll = { - .name = "camif-upll", - .ops = &(struct clk_ops) { - .set_rate = s3c2440_camif_upll_setrate, - .round_rate = s3c2440_camif_upll_round, - }, -}; - -static struct clk s3c2440_clk_ac97 = { - .name = "ac97", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) -{ - unsigned long ucon0, ucon1, ucon2, divisor; - - /* the fun of calculating the uart divisors on the s3c2440 */ - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) - divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6; - else if (ucon1 != 0) - divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21; - else if (ucon2 != 0) - divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36; - else - /* manual calims 44, seems to be 9 */ - divisor = 9; - - return clk_get_rate(clk->parent) / divisor; -} - -static struct clk s3c2440_clk_fclk_n = { - .name = "fclk_n", - .parent = &clk_f, - .ops = &(struct clk_ops) { - .get_rate = s3c2440_fclk_n_getrate, - }, -}; - -static struct clk_lookup s3c2440_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), -}; - -static int s3c2440_clk_add(struct device *dev) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2440_clk_cam.parent = clock_h; - s3c2440_clk_ac97.parent = clock_p; - s3c2440_clk_cam_upll.parent = clock_upll; - s3c24xx_register_clock(&s3c2440_clk_fclk_n); - - s3c24xx_register_clock(&s3c2440_clk_ac97); - s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_cam_upll); - clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup)); - - clk_disable(&s3c2440_clk_ac97); - clk_disable(&s3c2440_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_clk_add, -}; - -static __init int s3c24xx_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c24xx_clk_init); diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h deleted file mode 100644 index db8a98ac68c..00000000000 --- a/arch/arm/mach-s3c2440/common.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Header for S3C2440 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H -#define __ARCH_ARM_MACH_S3C2440_COMMON_H - -void s3c2440_restart(char mode, const char *cmd); - -#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */ diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c deleted file mode 100644 index 15b1ddf8f62..00000000000 --- a/arch/arm/mach-s3c2440/dma.c +++ /dev/null @@ -1,196 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/dma.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * S3C2440 DMA selection - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { - [DMACH_XD0] = { - .name = "xdreq0", - .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, - }, - [DMACH_XD1] = { - .name = "xdreq1", - .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, - }, - [DMACH_SDI] = { - .name = "sdi", - .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, - .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - }, - [DMACH_SPI0] = { - .name = "spi0", - .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - }, - [DMACH_SPI1] = { - .name = "spi1", - .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - }, - [DMACH_UART0] = { - .name = "uart0", - .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - }, - [DMACH_UART1] = { - .name = "uart1", - .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - }, - [DMACH_UART2] = { - .name = "uart2", - .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - }, - [DMACH_TIMER] = { - .name = "timer", - .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, - }, - [DMACH_I2S_IN] = { - .name = "i2s-sdi", - .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - }, - [DMACH_I2S_OUT] = { - .name = "i2s-sdo", - .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - }, - [DMACH_PCM_IN] = { - .name = "pcm-in", - .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, - .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, - }, - [DMACH_PCM_OUT] = { - .name = "pcm-out", - .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, - .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, - }, - [DMACH_MIC_IN] = { - .name = "mic-in", - .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, - .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, - }, - [DMACH_USB_EP1] = { - .name = "usb-ep1", - .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, - }, - [DMACH_USB_EP2] = { - .name = "usb-ep2", - .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, - }, - [DMACH_USB_EP3] = { - .name = "usb-ep3", - .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, - }, - [DMACH_USB_EP4] = { - .name = "usb-ep4", - .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, - }, -}; - -static void s3c2440_dma_select(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map) -{ - chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; -} - -static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = { - .select = s3c2440_dma_select, - .dcon_mask = 7 << 24, - .map = s3c2440_dma_mappings, - .map_size = ARRAY_SIZE(s3c2440_dma_mappings), -}; - -static struct s3c24xx_dma_order __initdata s3c2440_dma_order = { - .channels = { - [DMACH_SDI] = { - .list = { - [0] = 3 | DMA_CH_VALID, - [1] = 2 | DMA_CH_VALID, - [2] = 1 | DMA_CH_VALID, - [3] = 0 | DMA_CH_VALID, - }, - }, - [DMACH_I2S_IN] = { - .list = { - [0] = 1 | DMA_CH_VALID, - [1] = 2 | DMA_CH_VALID, - }, - }, - [DMACH_I2S_OUT] = { - .list = { - [0] = 2 | DMA_CH_VALID, - [1] = 1 | DMA_CH_VALID, - }, - }, - [DMACH_PCM_IN] = { - .list = { - [0] = 2 | DMA_CH_VALID, - [1] = 1 | DMA_CH_VALID, - }, - }, - [DMACH_PCM_OUT] = { - .list = { - [0] = 1 | DMA_CH_VALID, - [1] = 3 | DMA_CH_VALID, - }, - }, - [DMACH_MIC_IN] = { - .list = { - [0] = 3 | DMA_CH_VALID, - [1] = 2 | DMA_CH_VALID, - }, - }, - }, -}; - -static int __init s3c2440_dma_add(struct device *dev) -{ - s3c2410_dma_init(); - s3c24xx_dma_order_set(&s3c2440_dma_order); - return s3c24xx_dma_init_map(&s3c2440_dma_sel); -} - -static struct subsys_interface s3c2440_dma_interface = { - .name = "s3c2440_dma", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_dma_add, -}; - -static int __init s3c2440_dma_init(void) -{ - return subsys_interface_register(&s3c2440_dma_interface); -} - -arch_initcall(s3c2440_dma_init); - diff --git a/arch/arm/mach-s3c2440/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h deleted file mode 100644 index 3a56a229cac..00000000000 --- a/arch/arm/mach-s3c2440/include/mach/gta02.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef _GTA02_H -#define _GTA02_H - -#include - -/* Different hardware revisions, passed in ATAG_REVISION by u-boot */ -#define GTA02v1_SYSTEM_REV 0x00000310 -#define GTA02v2_SYSTEM_REV 0x00000320 -#define GTA02v3_SYSTEM_REV 0x00000330 -#define GTA02v4_SYSTEM_REV 0x00000340 -#define GTA02v5_SYSTEM_REV 0x00000350 -/* since A7 is basically same as A6, we use A6 PCB ID */ -#define GTA02v6_SYSTEM_REV 0x00000360 - -#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */ - -#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0) -#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1) -#define GTA02_GPIO_AUX_LED S3C2410_GPB(2) -#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3) -#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5) -#define GTA02_GPIO_BT_EN S3C2410_GPB(6) -#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7) -#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8) -#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9) - -#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */ - -#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */ -#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */ -#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */ - -#define GTA02_GPIO_nG1_INT S3C2410_GPF(0) -#define GTA02_GPIO_IO1 S3C2410_GPF(1) -#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4) -#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6) -#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7) - -#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4) -#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */ -#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */ -#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */ -#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */ - -#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */ -#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2) -#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4) -#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5) -#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */ -#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7) -#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8) -#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8) -#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10) -#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */ - -#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0 -#define GTA02_IRQ_MODEM IRQ_EINT1 -#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */ -#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4 -#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5 -#define GTA02_IRQ_AUX IRQ_EINT6 -#define GTA02_IRQ_nHOLD IRQ_EINT7 -#define GTA02_IRQ_PCF50633 IRQ_EINT9 -#define GTA02_IRQ_3D IRQ_EINT12 -#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */ -#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */ -#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */ -#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */ - -/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */ -#define GTA02_PCB_ID1_0 S3C2410_GPC(13) -#define GTA02_PCB_ID1_1 S3C2410_GPC(15) -#define GTA02_PCB_ID1_2 S3C2410_GPD(0) -#define GTA02_PCB_ID2_0 S3C2410_GPD(3) -#define GTA02_PCB_ID2_1 S3C2410_GPD(4) - -int gta02_get_pcb_revision(void); - -#endif /* _GTA02_H */ diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c deleted file mode 100644 index 4fee9bc6bcb..00000000000 --- a/arch/arm/mach-s3c2440/irq.c +++ /dev/null @@ -1,128 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#include -#include - -#include -#include -#include - -/* WDT/AC97 */ - -static void s3c_irq_demux_wdtac97(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 13; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_WDT); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_AC97); - } - } -} - - -#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) - -static void -s3c_irq_wdtac97_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13); -} - -static void -s3c_irq_wdtac97_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_WDT); -} - -static void -s3c_irq_wdtac97_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13); -} - -static struct irq_chip s3c_irq_wdtac97 = { - .irq_mask = s3c_irq_wdtac97_mask, - .irq_unmask = s3c_irq_wdtac97_unmask, - .irq_ack = s3c_irq_wdtac97_ack, -}; - -static int s3c2440_irq_add(struct device *dev) -{ - unsigned int irqno; - - printk("S3C2440: IRQ Support\n"); - - /* add new chained handler for wdt, ac7 */ - - irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); - - for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c deleted file mode 100644 index 24569550de1..00000000000 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ /dev/null @@ -1,491 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/mach-anubis.c - * - * Copyright 2003-2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -#include -#include -#include -#include - -#include "common.h" - -#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics" - -static struct map_desc anubis_iodesc[] __initdata = { - /* ISA IO areas */ - - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(0x0), - .length = SZ_4M, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(0x0), - .length = SZ_4M, - .type = MT_DEVICE, - }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - - /* CPLD control registers */ - - { - .virtual = (u32)ANUBIS_VA_CTRL1, - .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (u32)ANUBIS_VA_IDREG, - .pfn = __phys_to_pfn(ANUBIS_PA_IDREG), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, - [1] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, -}; - -/* NAND Flash on Anubis board */ - -static int external_map[] = { 2 }; -static int chip0_map[] = { 0 }; -static int chip1_map[] = { 1 }; - -static struct mtd_partition __initdata anubis_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_16K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_16K, - .offset = SZ_16K, - }, - [2] = { - .name = "user1", - .offset = SZ_4M, - .size = SZ_32M - SZ_4M, - }, - [3] = { - .name = "user2", - .offset = SZ_32M, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition __initdata anubis_default_nand_part_large[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_128K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_128K, - .offset = SZ_128K, - }, - [2] = { - .name = "user1", - .offset = SZ_4M, - .size = SZ_32M - SZ_4M, - }, - [3] = { - .name = "user2", - .offset = SZ_32M, - .size = MTDPART_SIZ_FULL, - } -}; - -/* the Anubis has 3 selectable slots for nand-flash, the two - * on-board chip areas, as well as the external slot. - * - * Note, there is no current hot-plug support for the External - * socket. -*/ - -static struct s3c2410_nand_set __initdata anubis_nand_sets[] = { - [1] = { - .name = "External", - .nr_chips = 1, - .nr_map = external_map, - .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), - .partitions = anubis_default_nand_part, - }, - [0] = { - .name = "chip0", - .nr_chips = 1, - .nr_map = chip0_map, - .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), - .partitions = anubis_default_nand_part, - }, - [2] = { - .name = "chip1", - .nr_chips = 1, - .nr_map = chip1_map, - .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), - .partitions = anubis_default_nand_part, - }, -}; - -static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) -{ - unsigned int tmp; - - slot = set->nr_map[slot] & 3; - - pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n", - slot, set, set->nr_map); - - tmp = __raw_readb(ANUBIS_VA_CTRL1); - tmp &= ~ANUBIS_CTRL1_NANDSEL; - tmp |= slot; - - pr_debug("anubis_nand: ctrl1 now %02x\n", tmp); - - __raw_writeb(tmp, ANUBIS_VA_CTRL1); -} - -static struct s3c2410_platform_nand __initdata anubis_nand_info = { - .tacls = 25, - .twrph0 = 55, - .twrph1 = 40, - .nr_sets = ARRAY_SIZE(anubis_nand_sets), - .sets = anubis_nand_sets, - .select_chip = anubis_nand_select, -}; - -/* IDE channels */ - -static struct pata_platform_info anubis_ide_platdata = { - .ioport_shift = 5, -}; - -static struct resource anubis_ide0_resource[] = { - { - .start = S3C2410_CS3, - .end = S3C2410_CS3 + (8*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = S3C2410_CS3 + (1<<26) + (6*32), - .end = S3C2410_CS3 + (1<<26) + (7*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_IDE0, - .end = IRQ_IDE0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device anubis_device_ide0 = { - .name = "pata_platform", - .id = 0, - .num_resources = ARRAY_SIZE(anubis_ide0_resource), - .resource = anubis_ide0_resource, - .dev = { - .platform_data = &anubis_ide_platdata, - .coherent_dma_mask = ~0, - }, -}; - -static struct resource anubis_ide1_resource[] = { - { - .start = S3C2410_CS4, - .end = S3C2410_CS4 + (8*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = S3C2410_CS4 + (1<<26) + (6*32), - .end = S3C2410_CS4 + (1<<26) + (7*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_IDE0, - .end = IRQ_IDE0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device anubis_device_ide1 = { - .name = "pata_platform", - .id = 1, - .num_resources = ARRAY_SIZE(anubis_ide1_resource), - .resource = anubis_ide1_resource, - .dev = { - .platform_data = &anubis_ide_platdata, - .coherent_dma_mask = ~0, - }, -}; - -/* Asix AX88796 10/100 ethernet controller */ - -static struct ax_plat_data anubis_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2, - .dcr_val = 0x48, - .rcr_val = 0x40, -}; - -static struct resource anubis_asix_resource[] = { - [0] = { - .start = S3C2410_CS5, - .end = S3C2410_CS5 + (0x20 * 0x20) -1, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = IRQ_ASIX, - .end = IRQ_ASIX, - .flags = IORESOURCE_IRQ - } -}; - -static struct platform_device anubis_device_asix = { - .name = "ax88796", - .id = 0, - .num_resources = ARRAY_SIZE(anubis_asix_resource), - .resource = anubis_asix_resource, - .dev = { - .platform_data = &anubis_asix_platdata, - } -}; - -/* SM501 */ - -static struct resource anubis_sm501_resource[] = { - [0] = { - .start = S3C2410_CS2, - .end = S3C2410_CS2 + SZ_8M, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C2410_CS2 + SZ_64M - SZ_2M, - .end = S3C2410_CS2 + SZ_64M - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_EINT0, - .end = IRQ_EINT0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct sm501_initdata anubis_sm501_initdata = { - .gpio_high = { - .set = 0x3F000000, /* 24bit panel */ - .mask = 0x0, - }, - .misc_timing = { - .set = 0x010100, /* SDRAM timing */ - .mask = 0x1F1F00, - }, - .misc_control = { - .set = SM501_MISC_PNL_24BIT, - .mask = 0, - }, - - .devices = SM501_USE_GPIO, - - /* set the SDRAM and bus clocks */ - .mclk = 72 * MHZ, - .m1xclk = 144 * MHZ, -}; - -static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = { - [0] = { - .bus_num = 1, - .pin_scl = 44, - .pin_sda = 45, - }, - [1] = { - .bus_num = 2, - .pin_scl = 40, - .pin_sda = 41, - }, -}; - -static struct sm501_platdata anubis_sm501_platdata = { - .init = &anubis_sm501_initdata, - .gpio_base = -1, - .gpio_i2c = anubis_sm501_gpio_i2c, - .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c), -}; - -static struct platform_device anubis_device_sm501 = { - .name = "sm501", - .id = 0, - .num_resources = ARRAY_SIZE(anubis_sm501_resource), - .resource = anubis_sm501_resource, - .dev = { - .platform_data = &anubis_sm501_platdata, - }, -}; - -/* Standard Anubis devices */ - -static struct platform_device *anubis_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_wdt, - &s3c_device_adc, - &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_nand, - &anubis_device_ide0, - &anubis_device_ide1, - &anubis_device_asix, - &anubis_device_sm501, -}; - -static struct clk *anubis_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - -/* I2C devices. */ - -static struct i2c_board_info anubis_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("tps65011", 0x48), - .irq = IRQ_EINT20, - } -}; - -/* Audio setup */ -static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { - .have_mic = 1, - .have_lout = 1, - .output_cdclk = 1, - .use_mpllin = 1, - .amp_gpio = S3C2410_GPB(2), - .amp_gain[0] = S3C2410_GPD(10), - .amp_gain[1] = S3C2410_GPD(11), -}; - -static void __init anubis_map_io(void) -{ - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks)); - - s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); - s3c24xx_init_clocks(0); - s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); - - /* check for the newer revision boards with large page nand */ - - if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) { - printk(KERN_INFO "ANUBIS-B detected (revision %d)\n", - __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK); - anubis_nand_sets[0].partitions = anubis_default_nand_part_large; - anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large); - } else { - /* ensure that the GPIO is setup */ - s3c2410_gpio_setpin(S3C2410_GPA(0), 1); - } -} - -static void __init anubis_init(void) -{ - s3c_i2c0_set_platdata(NULL); - s3c_nand_set_platdata(&anubis_nand_info); - simtec_audio_add(NULL, false, &anubis_audio); - - platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices)); - - i2c_register_board_info(0, anubis_i2c_devs, - ARRAY_SIZE(anubis_i2c_devs)); -} - - -MACHINE_START(ANUBIS, "Simtec-Anubis") - /* Maintainer: Ben Dooks */ - .atag_offset = 0x100, - .map_io = anubis_map_io, - .init_machine = anubis_init, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, - .restart = s3c2440_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c deleted file mode 100644 index d6a9763110c..00000000000 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ /dev/null @@ -1,226 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c - * - * Copyright (c) 2008 Ramax Lo - * Based on mach-anubis.c by Ben Dooks - * and modifications by SBZ and - * Weibing - * - * For product information, visit http://www.arm.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "common.h" - -static struct map_desc at2440evb_iodesc[] __initdata = { - /* Nothing here */ -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) -#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) - -static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, -}; - -/* NAND Flash on AT2440EVB board */ - -static struct mtd_partition __initdata at2440evb_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_256K, - .offset = 0, - }, - [1] = { - .name = "Kernel", - .size = SZ_2M, - .offset = SZ_256K, - }, - [2] = { - .name = "Root", - .offset = SZ_256K + SZ_2M, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = { - [0] = { - .name = "nand", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part), - .partitions = at2440evb_default_nand_part, - }, -}; - -static struct s3c2410_platform_nand __initdata at2440evb_nand_info = { - .tacls = 25, - .twrph0 = 55, - .twrph1 = 40, - .nr_sets = ARRAY_SIZE(at2440evb_nand_sets), - .sets = at2440evb_nand_sets, -}; - -/* DM9000AEP 10/100 ethernet controller */ - -static struct resource at2440evb_dm9k_resource[] = { - [0] = { - .start = S3C2410_CS3, - .end = S3C2410_CS3 + 3, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = S3C2410_CS3 + 4, - .end = S3C2410_CS3 + 7, - .flags = IORESOURCE_MEM - }, - [2] = { - .start = IRQ_EINT7, - .end = IRQ_EINT7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct dm9000_plat_data at2440evb_dm9k_pdata = { - .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), -}; - -static struct platform_device at2440evb_device_eth = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource), - .resource = at2440evb_dm9k_resource, - .dev = { - .platform_data = &at2440evb_dm9k_pdata, - }, -}; - -static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = { - .gpio_detect = S3C2410_GPG(10), -}; - -/* 7" LCD panel */ - -static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = { - - .lcdcon5 = S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_PWREN | - S3C2410_LCDCON5_HWSWP, - - .type = S3C2410_LCDCON1_TFT, - - .width = 800, - .height = 480, - - .pixclock = 33333, /* HCLK 60 MHz, divisor 2 */ - .xres = 800, - .yres = 480, - .bpp = 16, - .left_margin = 88, - .right_margin = 40, - .hsync_len = 128, - .upper_margin = 32, - .lower_margin = 11, - .vsync_len = 2, -}; - -static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = { - .displays = &at2440evb_lcd_cfg, - .num_displays = 1, - .default_display = 0, -}; - -static struct platform_device *at2440evb_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_wdt, - &s3c_device_adc, - &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_nand, - &s3c_device_sdi, - &s3c_device_lcd, - &at2440evb_device_eth, -}; - -static void __init at2440evb_map_io(void) -{ - s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); - s3c24xx_init_clocks(16934400); - s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); -} - -static void __init at2440evb_init(void) -{ - s3c24xx_fb_set_platdata(&at2440evb_fb_info); - s3c24xx_mci_set_platdata(&at2440evb_mci_pdata); - s3c_nand_set_platdata(&at2440evb_nand_info); - s3c_i2c0_set_platdata(NULL); - - platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices)); -} - - -MACHINE_START(AT2440EVB, "AT2440EVB") - .atag_offset = 0x100, - .map_io = at2440evb_map_io, - .init_machine = at2440evb_init, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, - .restart = s3c2440_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c deleted file mode 100644 index cf270f51d14..00000000000 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ /dev/null @@ -1,605 +0,0 @@ -/* - * linux/arch/arm/mach-s3c2442/mach-gta02.c - * - * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner. - * - * Copyright (C) 2006-2009 by Openmoko, Inc. - * Authors: Harald Welte - * Andy Green - * Werner Almesberger - * All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include - -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "common.h" - -static struct pcf50633 *gta02_pcf; - -/* - * This gets called frequently when we paniced. - */ - -static long gta02_panic_blink(int state) -{ - long delay = 0; - char led; - - led = (state) ? 1 : 0; - gpio_direction_output(GTA02_GPIO_AUX_LED, led); - - return delay; -} - - -static struct map_desc gta02_iodesc[] __initdata = { - { - .virtual = 0xe0000000, - .pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000), - .length = SZ_1M, - .type = MT_DEVICE - }, -}; - -#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN) -#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) -#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) - -static struct s3c2410_uartcfg gta02_uartcfgs[] = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, -}; - -#ifdef CONFIG_CHARGER_PCF50633 -/* - * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin. - * We use this to recognize that we can pull 1A from the USB socket. - * - * These constants are the measured pcf50633 ADC levels with the 1A - * charger / 48K resistor, and with no pulldown resistor. - */ - -#define ADC_NOM_CHG_DETECT_1A 6 -#define ADC_NOM_CHG_DETECT_USB 43 - -static void -gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) -{ - int ma; - - /* Interpret charger type */ - if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) { - - /* - * Sanity - stop GPO driving out now that we have a 1A charger - * GPO controls USB Host power generation on GTA02 - */ - pcf50633_gpio_set(pcf, PCF50633_GPO, 0); - - ma = 1000; - } else - ma = 100; - - pcf50633_mbc_usb_curlim_set(pcf, ma); -} - -static struct delayed_work gta02_charger_work; -static int gta02_usb_vbus_draw; - -static void gta02_charger_worker(struct work_struct *work) -{ - if (gta02_usb_vbus_draw) { - pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw); - return; - } - -#ifdef CONFIG_PCF50633_ADC - pcf50633_adc_async_read(gta02_pcf, - PCF50633_ADCC1_MUX_ADCIN1, - PCF50633_ADCC1_AVERAGE_16, - gta02_configure_pmu_for_charger, - NULL); -#else - /* - * If the PCF50633 ADC is disabled we fallback to a - * 100mA limit for safety. - */ - pcf50633_mbc_usb_curlim_set(pcf, 100); -#endif -} - -#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000) - -static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq) -{ - if (irq == PCF50633_IRQ_USBINS) { - schedule_delayed_work(>a02_charger_work, - GTA02_CHARGER_CONFIGURE_TIMEOUT); - - return; - } - - if (irq == PCF50633_IRQ_USBREM) { - cancel_delayed_work_sync(>a02_charger_work); - gta02_usb_vbus_draw = 0; - } -} - -static void gta02_udc_vbus_draw(unsigned int ma) -{ - if (!gta02_pcf) - return; - - gta02_usb_vbus_draw = ma; - - schedule_delayed_work(>a02_charger_work, - GTA02_CHARGER_CONFIGURE_TIMEOUT); -} -#else /* !CONFIG_CHARGER_PCF50633 */ -#define gta02_pmu_event_callback NULL -#define gta02_udc_vbus_draw NULL -#endif - -/* - * This is called when pc50633 is probed, unfortunately quite late in the - * day since it is an I2C bus device. Here we can belatedly define some - * platform devices with the advantage that we can mark the pcf50633 as the - * parent. This makes them get suspended and resumed with their parent - * the pcf50633 still around. - */ - -static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf); - - -static char *gta02_batteries[] = { - "battery", -}; - -static struct pcf50633_bl_platform_data gta02_backlight_data = { - .default_brightness = 0x3f, - .default_brightness_limit = 0, - .ramp_time = 5, -}; - -struct pcf50633_platform_data gta02_pcf_pdata = { - .resumers = { - [0] = PCF50633_INT1_USBINS | - PCF50633_INT1_USBREM | - PCF50633_INT1_ALARM, - [1] = PCF50633_INT2_ONKEYF, - [2] = PCF50633_INT3_ONKEY1S, - [3] = PCF50633_INT4_LOWSYS | - PCF50633_INT4_LOWBAT | - PCF50633_INT4_HIGHTMP, - }, - - .batteries = gta02_batteries, - .num_batteries = ARRAY_SIZE(gta02_batteries), - - .charger_reference_current_ma = 1000, - - .backlight_data = >a02_backlight_data, - - .reg_init_data = { - [PCF50633_REGULATOR_AUTO] = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_DOWN1] = { - .constraints = { - .min_uV = 1300000, - .max_uV = 1600000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_DOWN2] = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .apply_uV = 1, - .always_on = 1, - }, - }, - [PCF50633_REGULATOR_HCLDO] = { - .constraints = { - .min_uV = 2000000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - }, - [PCF50633_REGULATOR_LDO1] = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_LDO2] = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_LDO3] = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_LDO4] = { - .constraints = { - .min_uV = 3200000, - .max_uV = 3200000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_LDO5] = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_LDO6] = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - }, - }, - [PCF50633_REGULATOR_MEMLDO] = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - }, - }, - - }, - .probe_done = gta02_pmu_attach_child_devices, - .mbc_event_callback = gta02_pmu_event_callback, -}; - - -/* NOR Flash. */ - -#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */ -#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */ - -static struct physmap_flash_data gta02_nor_flash_data = { - .width = 2, -}; - -static struct resource gta02_nor_flash_resource = { - .start = GTA02_FLASH_BASE, - .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device gta02_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = >a02_nor_flash_data, - }, - .resource = >a02_nor_flash_resource, - .num_resources = 1, -}; - - -struct platform_device s3c24xx_pwm_device = { - .name = "s3c24xx_pwm", - .num_resources = 0, -}; - -static struct platform_device gta02_dfbmcs320_device = { - .name = "dfbmcs320", -}; - -static struct i2c_board_info gta02_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("pcf50633", 0x73), - .irq = GTA02_IRQ_PCF50633, - .platform_data = >a02_pcf_pdata, - }, - { - I2C_BOARD_INFO("wm8753", 0x1a), - }, -}; - -static struct s3c2410_nand_set __initdata gta02_nand_sets[] = { - [0] = { - /* - * This name is also hard-coded in the boot loaders, so - * changing it would would require all users to upgrade - * their boot loaders, some of which are stored in a NOR - * that is considered to be immutable. - */ - .name = "neo1973-nand", - .nr_chips = 1, - .flash_bbt = 1, - }, -}; - -/* - * Choose a set of timings derived from S3C@2442B MCP54 - * data sheet (K5D2G13ACM-D075 MCP Memory). - */ - -static struct s3c2410_platform_nand __initdata gta02_nand_info = { - .tacls = 0, - .twrph0 = 25, - .twrph1 = 15, - .nr_sets = ARRAY_SIZE(gta02_nand_sets), - .sets = gta02_nand_sets, -}; - - -/* Get PMU to set USB current limit accordingly. */ -static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = { - .vbus_draw = gta02_udc_vbus_draw, - .pullup_pin = GTA02_GPIO_USB_PULLUP, -}; - -/* USB */ -static struct s3c2410_hcd_info gta02_usb_info __initdata = { - .port[0] = { - .flags = S3C_HCDFLG_USED, - }, - .port[1] = { - .flags = 0, - }, -}; - -/* Touchscreen */ -static struct s3c2410_ts_mach_info gta02_ts_info = { - .delay = 10000, - .presc = 0xff, /* slow as we can go */ - .oversampling_shift = 2, -}; - -/* Buttons */ -static struct gpio_keys_button gta02_buttons[] = { - { - .gpio = GTA02_GPIO_AUX_KEY, - .code = KEY_PHONE, - .desc = "Aux", - .type = EV_KEY, - .debounce_interval = 100, - }, - { - .gpio = GTA02_GPIO_HOLD_KEY, - .code = KEY_PAUSE, - .desc = "Hold", - .type = EV_KEY, - .debounce_interval = 100, - }, -}; - -static struct gpio_keys_platform_data gta02_buttons_pdata = { - .buttons = gta02_buttons, - .nbuttons = ARRAY_SIZE(gta02_buttons), -}; - -static struct platform_device gta02_buttons_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = >a02_buttons_pdata, - }, -}; - -static void __init gta02_map_io(void) -{ - s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); -} - - -/* These are the guys that don't need to be children of PMU. */ - -static struct platform_device *gta02_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_wdt, - &s3c_device_sdi, - &s3c_device_usbgadget, - &s3c_device_nand, - >a02_nor_flash, - &s3c24xx_pwm_device, - &s3c_device_iis, - &samsung_asoc_dma, - &s3c_device_i2c0, - >a02_dfbmcs320_device, - >a02_buttons_device, - &s3c_device_adc, - &s3c_device_ts, -}; - -/* These guys DO need to be children of PMU. */ - -static struct platform_device *gta02_devices_pmu_children[] = { -}; - - -/* - * This is called when pc50633 is probed, quite late in the day since it is an - * I2C bus device. Here we can define platform devices with the advantage that - * we can mark the pcf50633 as the parent. This makes them get suspended and - * resumed with their parent the pcf50633 still around. All devices whose - * operation depends on something from pcf50633 must have this relationship - * made explicit like this, or suspend and resume will become an unreliable - * hellworld. - */ - -static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf) -{ - int n; - - /* Grab a copy of the now probed PMU pointer. */ - gta02_pcf = pcf; - - for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++) - gta02_devices_pmu_children[n]->dev.parent = pcf->dev; - - platform_add_devices(gta02_devices_pmu_children, - ARRAY_SIZE(gta02_devices_pmu_children)); -} - -static void gta02_poweroff(void) -{ - pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1); -} - -static void __init gta02_machine_init(void) -{ - /* Set the panic callback to turn AUX LED on or off. */ - panic_blink = gta02_panic_blink; - - s3c_pm_init(); - -#ifdef CONFIG_CHARGER_PCF50633 - INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker); -#endif - - s3c24xx_udc_set_platdata(>a02_udc_cfg); - s3c24xx_ts_set_platdata(>a02_ts_info); - s3c_ohci_set_platdata(>a02_usb_info); - s3c_nand_set_platdata(>a02_nand_info); - s3c_i2c0_set_platdata(NULL); - - i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs)); - - platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); - pm_power_off = gta02_poweroff; - - regulator_has_full_constraints(); -} - - -MACHINE_START(NEO1973_GTA02, "GTA02") - /* Maintainer: Nelson Castillo */ - .atag_offset = 0x100, - .map_io = gta02_map_io, - .init_irq = s3c24xx_init_irq, - .init_machine = gta02_machine_init, - .timer = &s3c24xx_timer, - .restart = s3c2440_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c deleted file mode 100644 index adbbb85bc4c..00000000000 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ /dev/null @@ -1,705 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/mach-mini2440.c - * - * Copyright (c) 2008 Ramax Lo - * Based on mach-anubis.c by Ben Dooks - * and modifications by SBZ and - * Weibing and - * Michel Pollet - * - * For product information, visit http://code.google.com/p/mini2440/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -#include "common.h" - -#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300) - -static struct map_desc mini2440_iodesc[] __initdata = { - /* nothing to declare, move along */ -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - - -static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, -}; - -/* USB device UDC support */ - -static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { - .pullup_pin = S3C2410_GPC(5), -}; - - -/* LCD timing and setup */ - -/* - * This macro simplifies the table bellow - */ -#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \ - _yres,margin_top,margin_bottom,vsync, refresh) \ - .width = _xres, \ - .xres = _xres, \ - .height = _yres, \ - .yres = _yres, \ - .left_margin = margin_left, \ - .right_margin = margin_right, \ - .upper_margin = margin_top, \ - .lower_margin = margin_bottom, \ - .hsync_len = hsync, \ - .vsync_len = vsync, \ - .pixclock = ((_clock*100000000000LL) / \ - ((refresh) * \ - (hsync + margin_left + _xres + margin_right) * \ - (vsync + margin_top + _yres + margin_bottom))), \ - .bpp = 16,\ - .type = (S3C2410_LCDCON1_TFT16BPP |\ - S3C2410_LCDCON1_TFT) - -static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { - [0] = { /* mini2440 + 3.5" TFT + touchscreen */ - _LCD_DECLARE( - 7, /* The 3.5 is quite fast */ - 240, 21, 38, 6, /* x timing */ - 320, 4, 4, 2, /* y timing */ - 60), /* refresh rate */ - .lcdcon5 = (S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_INVVDEN | - S3C2410_LCDCON5_PWREN), - }, - [1] = { /* mini2440 + 7" TFT + touchscreen */ - _LCD_DECLARE( - 10, /* the 7" runs slower */ - 800, 40, 40, 48, /* x timing */ - 480, 29, 3, 3, /* y timing */ - 50), /* refresh rate */ - .lcdcon5 = (S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_PWREN), - }, - /* The VGA shield can outout at several resolutions. All share - * the same timings, however, anything smaller than 1024x768 - * will only be displayed in the top left corner of a 1024x768 - * XGA output unless you add optional dip switches to the shield. - * Therefore timings for other resolutions have been omitted here. - */ - [2] = { - _LCD_DECLARE( - 10, - 1024, 1, 2, 2, /* y timing */ - 768, 200, 16, 16, /* x timing */ - 24), /* refresh rate, maximum stable, - tested with the FPGA shield */ - .lcdcon5 = (S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_HWSWP), - }, - /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/ - [3] = { - _LCD_DECLARE( - /* clock */ - 7, - /* xres, margin_right, margin_left, hsync */ - 320, 68, 66, 4, - /* yres, margin_top, margin_bottom, vsync */ - 240, 4, 4, 9, - /* refresh rate */ - 60), - .lcdcon5 = (S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVDEN | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVCLK | - S3C2410_LCDCON5_HWSWP), - }, -}; - -/* todo - put into gpio header */ - -#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) -#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) - -static struct s3c2410fb_mach_info mini2440_fb_info __initdata = { - .displays = &mini2440_lcd_cfg[0], /* not constant! see init */ - .num_displays = 1, - .default_display = 0, - - /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN - * and disable the pull down resistors on pins we are using for LCD - * data. */ - - .gpcup = (0xf << 1) | (0x3f << 10), - - .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE | - S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM | - S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 | - S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 | - S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7), - - .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) | - S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) | - S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) | - S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) | - S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)), - - .gpdup = (0x3f << 2) | (0x3f << 10), - - .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 | - S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 | - S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 | - S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 | - S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 | - S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23), - - .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) | - S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) | - S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) | - S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)| - S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)| - S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)), -}; - -/* MMC/SD */ - -static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = { - .gpio_detect = S3C2410_GPG(8), - .gpio_wprotect = S3C2410_GPH(8), - .set_power = NULL, - .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34, -}; - -/* NAND Flash on MINI2440 board */ - -static struct mtd_partition mini2440_default_nand_part[] __initdata = { - [0] = { - .name = "u-boot", - .size = SZ_256K, - .offset = 0, - }, - [1] = { - .name = "u-boot-env", - .size = SZ_128K, - .offset = SZ_256K, - }, - [2] = { - .name = "kernel", - /* 5 megabytes, for a kernel with no modules - * or a uImage with a ramdisk attached */ - .size = 0x00500000, - .offset = SZ_256K + SZ_128K, - }, - [3] = { - .name = "root", - .offset = SZ_256K + SZ_128K + 0x00500000, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = { - [0] = { - .name = "nand", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part), - .partitions = mini2440_default_nand_part, - .flash_bbt = 1, /* we use u-boot to create a BBT */ - }, -}; - -static struct s3c2410_platform_nand mini2440_nand_info __initdata = { - .tacls = 0, - .twrph0 = 25, - .twrph1 = 15, - .nr_sets = ARRAY_SIZE(mini2440_nand_sets), - .sets = mini2440_nand_sets, - .ignore_unset_ecc = 1, -}; - -/* DM9000AEP 10/100 ethernet controller */ - -static struct resource mini2440_dm9k_resource[] = { - [0] = { - .start = MACH_MINI2440_DM9K_BASE, - .end = MACH_MINI2440_DM9K_BASE + 3, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = MACH_MINI2440_DM9K_BASE + 4, - .end = MACH_MINI2440_DM9K_BASE + 7, - .flags = IORESOURCE_MEM - }, - [2] = { - .start = IRQ_EINT7, - .end = IRQ_EINT7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -/* - * The DM9000 has no eeprom, and it's MAC address is set by - * the bootloader before starting the kernel. - */ -static struct dm9000_plat_data mini2440_dm9k_pdata = { - .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), -}; - -static struct platform_device mini2440_device_eth = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(mini2440_dm9k_resource), - .resource = mini2440_dm9k_resource, - .dev = { - .platform_data = &mini2440_dm9k_pdata, - }, -}; - -/* CON5 - * +--+ /-----\ - * | | | | - * | | | BAT | - * | | \_____/ - * | | - * | | +----+ +----+ - * | | | K5 | | K1 | - * | | +----+ +----+ - * | | +----+ +----+ - * | | | K4 | | K2 | - * | | +----+ +----+ - * | | +----+ +----+ - * | | | K6 | | K3 | - * | | +----+ +----+ - * ..... - */ -static struct gpio_keys_button mini2440_buttons[] = { - { - .gpio = S3C2410_GPG(0), /* K1 */ - .code = KEY_F1, - .desc = "Button 1", - .active_low = 1, - }, - { - .gpio = S3C2410_GPG(3), /* K2 */ - .code = KEY_F2, - .desc = "Button 2", - .active_low = 1, - }, - { - .gpio = S3C2410_GPG(5), /* K3 */ - .code = KEY_F3, - .desc = "Button 3", - .active_low = 1, - }, - { - .gpio = S3C2410_GPG(6), /* K4 */ - .code = KEY_POWER, - .desc = "Power", - .active_low = 1, - }, - { - .gpio = S3C2410_GPG(7), /* K5 */ - .code = KEY_F5, - .desc = "Button 5", - .active_low = 1, - }, -#if 0 - /* this pin is also known as TCLK1 and seems to already - * marked as "in use" somehow in the kernel -- possibly wrongly */ - { - .gpio = S3C2410_GPG(11), /* K6 */ - .code = KEY_F6, - .desc = "Button 6", - .active_low = 1, - }, -#endif -}; - -static struct gpio_keys_platform_data mini2440_button_data = { - .buttons = mini2440_buttons, - .nbuttons = ARRAY_SIZE(mini2440_buttons), -}; - -static struct platform_device mini2440_button_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &mini2440_button_data, - } -}; - -/* LEDS */ - -static struct s3c24xx_led_platdata mini2440_led1_pdata = { - .name = "led1", - .gpio = S3C2410_GPB(5), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .def_trigger = "heartbeat", -}; - -static struct s3c24xx_led_platdata mini2440_led2_pdata = { - .name = "led2", - .gpio = S3C2410_GPB(6), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .def_trigger = "nand-disk", -}; - -static struct s3c24xx_led_platdata mini2440_led3_pdata = { - .name = "led3", - .gpio = S3C2410_GPB(7), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .def_trigger = "mmc0", -}; - -static struct s3c24xx_led_platdata mini2440_led4_pdata = { - .name = "led4", - .gpio = S3C2410_GPB(8), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .def_trigger = "", -}; - -static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = { - .name = "backlight", - .gpio = S3C2410_GPG(4), - .def_trigger = "backlight", -}; - -static struct platform_device mini2440_led1 = { - .name = "s3c24xx_led", - .id = 1, - .dev = { - .platform_data = &mini2440_led1_pdata, - }, -}; - -static struct platform_device mini2440_led2 = { - .name = "s3c24xx_led", - .id = 2, - .dev = { - .platform_data = &mini2440_led2_pdata, - }, -}; - -static struct platform_device mini2440_led3 = { - .name = "s3c24xx_led", - .id = 3, - .dev = { - .platform_data = &mini2440_led3_pdata, - }, -}; - -static struct platform_device mini2440_led4 = { - .name = "s3c24xx_led", - .id = 4, - .dev = { - .platform_data = &mini2440_led4_pdata, - }, -}; - -static struct platform_device mini2440_led_backlight = { - .name = "s3c24xx_led", - .id = 5, - .dev = { - .platform_data = &mini2440_led_backlight_pdata, - }, -}; - -/* AUDIO */ - -static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = { - .l3_clk = S3C2410_GPB(4), - .l3_mode = S3C2410_GPB(2), - .l3_data = S3C2410_GPB(3), - .model = UDA134X_UDA1341 -}; - -static struct platform_device mini2440_audio = { - .name = "s3c24xx_uda134x", - .id = 0, - .dev = { - .platform_data = &mini2440_audio_pins, - }, -}; - -/* - * I2C devices - */ -static struct at24_platform_data at24c08 = { - .byte_len = SZ_8K / 8, - .page_size = 16, -}; - -static struct i2c_board_info mini2440_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("24c08", 0x50), - .platform_data = &at24c08, - }, -}; - -static struct platform_device uda1340_codec = { - .name = "uda134x-codec", - .id = -1, -}; - -static struct platform_device *mini2440_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_usbgadget, - &mini2440_device_eth, - &mini2440_led1, - &mini2440_led2, - &mini2440_led3, - &mini2440_led4, - &mini2440_button_device, - &s3c_device_nand, - &s3c_device_sdi, - &s3c_device_iis, - &uda1340_codec, - &mini2440_audio, - &samsung_asoc_dma, -}; - -static void __init mini2440_map_io(void) -{ - s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); -} - -/* - * mini2440_features string - * - * t = Touchscreen present - * b = backlight control - * c = camera [TODO] - * 0-9 LCD configuration - * - */ -static char mini2440_features_str[12] __initdata = "0tb"; - -static int __init mini2440_features_setup(char *str) -{ - if (str) - strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str)); - return 1; -} - -__setup("mini2440=", mini2440_features_setup); - -#define FEATURE_SCREEN (1 << 0) -#define FEATURE_BACKLIGHT (1 << 1) -#define FEATURE_TOUCH (1 << 2) -#define FEATURE_CAMERA (1 << 3) - -struct mini2440_features_t { - int count; - int done; - int lcd_index; - struct platform_device *optional[8]; -}; - -static void __init mini2440_parse_features( - struct mini2440_features_t * features, - const char * features_str ) -{ - const char * fp = features_str; - - features->count = 0; - features->done = 0; - features->lcd_index = -1; - - while (*fp) { - char f = *fp++; - - switch (f) { - case '0'...'9': /* tft screen */ - if (features->done & FEATURE_SCREEN) { - printk(KERN_INFO "MINI2440: '%c' ignored, " - "screen type already set\n", f); - } else { - int li = f - '0'; - if (li >= ARRAY_SIZE(mini2440_lcd_cfg)) - printk(KERN_INFO "MINI2440: " - "'%c' out of range LCD mode\n", f); - else { - features->optional[features->count++] = - &s3c_device_lcd; - features->lcd_index = li; - } - } - features->done |= FEATURE_SCREEN; - break; - case 'b': - if (features->done & FEATURE_BACKLIGHT) - printk(KERN_INFO "MINI2440: '%c' ignored, " - "backlight already set\n", f); - else { - features->optional[features->count++] = - &mini2440_led_backlight; - } - features->done |= FEATURE_BACKLIGHT; - break; - case 't': - printk(KERN_INFO "MINI2440: '%c' ignored, " - "touchscreen not compiled in\n", f); - break; - case 'c': - if (features->done & FEATURE_CAMERA) - printk(KERN_INFO "MINI2440: '%c' ignored, " - "camera already registered\n", f); - else - features->optional[features->count++] = - &s3c_device_camif; - features->done |= FEATURE_CAMERA; - break; - } - } -} - -static void __init mini2440_init(void) -{ - struct mini2440_features_t features = { 0 }; - int i; - - printk(KERN_INFO "MINI2440: Option string mini2440=%s\n", - mini2440_features_str); - - /* Parse the feature string */ - mini2440_parse_features(&features, mini2440_features_str); - - /* turn LCD on */ - s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); - - /* Turn the backlight early on */ - WARN_ON(gpio_request(S3C2410_GPG(4), "backlight")); - gpio_direction_output(S3C2410_GPG(4), 1); - - /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ - s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); - s3c2410_gpio_setpin(S3C2410_GPB(1), 0); - s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); - - /* mark the key as input, without pullups (there is one on the board) */ - for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { - s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT); - } - if (features.lcd_index != -1) { - int li; - - mini2440_fb_info.displays = - &mini2440_lcd_cfg[features.lcd_index]; - - printk(KERN_INFO "MINI2440: LCD"); - for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++) - if (li == features.lcd_index) - printk(" [%d:%dx%d]", li, - mini2440_lcd_cfg[li].width, - mini2440_lcd_cfg[li].height); - else - printk(" %d:%dx%d", li, - mini2440_lcd_cfg[li].width, - mini2440_lcd_cfg[li].height); - printk("\n"); - s3c24xx_fb_set_platdata(&mini2440_fb_info); - } - - s3c24xx_udc_set_platdata(&mini2440_udc_cfg); - s3c24xx_mci_set_platdata(&mini2440_mmc_cfg); - s3c_nand_set_platdata(&mini2440_nand_info); - s3c_i2c0_set_platdata(NULL); - - i2c_register_board_info(0, mini2440_i2c_devs, - ARRAY_SIZE(mini2440_i2c_devs)); - - platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices)); - - if (features.count) /* the optional features */ - platform_add_devices(features.optional, features.count); - -} - - -MACHINE_START(MINI2440, "MINI2440") - /* Maintainer: Michel Pollet */ - .atag_offset = 0x100, - .map_io = mini2440_map_io, - .init_machine = mini2440_init, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, - .restart = s3c2440_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c deleted file mode 100644 index 40eaf844bc1..00000000000 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ /dev/null @@ -1,162 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c - * - * Copyright (c) 2004 Nex Vision - * Guillaume GOURAT - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 15-10-2004 GG Created initial version - * 12-03-2005 BJD Updated for release - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#include -#include -#include -#include - -//#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "common.h" - -static struct map_desc nexcoder_iodesc[] __initdata = { - /* nothing here yet */ -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -/* NOR Flash on NexVision NexCoder 2440 board */ - -static struct resource nexcoder_nor_resource[] = { - [0] = { - .start = S3C2410_CS0, - .end = S3C2410_CS0 + (8*1024*1024) - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct map_info nexcoder_nor_map = { - .bankwidth = 2, -}; - -static struct platform_device nexcoder_device_nor = { - .name = "mtd-flash", - .id = -1, - .num_resources = ARRAY_SIZE(nexcoder_nor_resource), - .resource = nexcoder_nor_resource, - .dev = - { - .platform_data = &nexcoder_nor_map, - } -}; - -/* Standard Nexcoder devices */ - -static struct platform_device *nexcoder_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_rtc, - &s3c_device_camif, - &s3c_device_spi0, - &s3c_device_spi1, - &nexcoder_device_nor, -}; - -static void __init nexcoder_sensorboard_init(void) -{ - // Initialize SCCB bus - s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL - s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA - s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT); - - // Power up the sensor board - s3c2410_gpio_setpin(S3C2410_GPF(1), 1); - s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); - s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN -} - -static void __init nexcoder_map_io(void) -{ - s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); - s3c24xx_init_clocks(0); - s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); - - nexcoder_sensorboard_init(); -} - -static void __init nexcoder_init(void) -{ - s3c_i2c0_set_platdata(NULL); - platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices)); -}; - -MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") - /* Maintainer: Guillaume GOURAT */ - .atag_offset = 0x100, - .map_io = nexcoder_map_io, - .init_machine = nexcoder_init, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, - .restart = s3c2440_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c2440/mach-osiris-dvs.c deleted file mode 100644 index ad2792dfbee..00000000000 --- a/arch/arm/mach-s3c2440/mach-osiris-dvs.c +++ /dev/null @@ -1,194 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c - * - * Copyright (c) 2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * Simtec Osiris Dynamic Voltage Scaling support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include - -#include - -#include - -#define OSIRIS_GPIO_DVS S3C2410_GPB(5) - -static bool dvs_en; - -static void osiris_dvs_tps_setdvs(bool on) -{ - unsigned vregs1 = 0, vdcdc2 = 0; - - if (!on) { - vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF; - vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */ - } - - dvs_en = on; - vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V; - vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE; - - tps65010_config_vregs1(vregs1); - tps65010_config_vdcdc2(vdcdc2); -} - -static bool is_dvs(struct s3c_freq *f) -{ - /* at the moment, we assume ARMCLK = HCLK => DVS */ - return f->armclk == f->hclk; -} - -/* keep track of current state */ -static bool cur_dvs = false; - -static int osiris_dvs_notify(struct notifier_block *nb, - unsigned long val, void *data) -{ - struct cpufreq_freqs *cf = data; - struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf); - bool old_dvs = is_dvs(&freqs->old); - bool new_dvs = is_dvs(&freqs->new); - int ret = 0; - - if (!dvs_en) - return 0; - - printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__, - freqs->old.armclk, freqs->old.hclk, - freqs->new.armclk, freqs->new.hclk); - - switch (val) { - case CPUFREQ_PRECHANGE: - if (old_dvs & !new_dvs || - cur_dvs & !new_dvs) { - pr_debug("%s: exiting dvs\n", __func__); - cur_dvs = false; - gpio_set_value(OSIRIS_GPIO_DVS, 1); - } - break; - case CPUFREQ_POSTCHANGE: - if (!old_dvs & new_dvs || - !cur_dvs & new_dvs) { - pr_debug("entering dvs\n"); - cur_dvs = true; - gpio_set_value(OSIRIS_GPIO_DVS, 0); - } - break; - } - - return ret; -} - -static struct notifier_block osiris_dvs_nb = { - .notifier_call = osiris_dvs_notify, -}; - -static int __devinit osiris_dvs_probe(struct platform_device *pdev) -{ - int ret; - - dev_info(&pdev->dev, "initialising\n"); - - ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs"); - if (ret) { - dev_err(&pdev->dev, "cannot claim gpio\n"); - goto err_nogpio; - } - - /* start with dvs disabled */ - gpio_direction_output(OSIRIS_GPIO_DVS, 1); - - ret = cpufreq_register_notifier(&osiris_dvs_nb, - CPUFREQ_TRANSITION_NOTIFIER); - if (ret) { - dev_err(&pdev->dev, "failed to register with cpufreq\n"); - goto err_nofreq; - } - - osiris_dvs_tps_setdvs(true); - - return 0; - -err_nofreq: - gpio_free(OSIRIS_GPIO_DVS); - -err_nogpio: - return ret; -} - -static int __devexit osiris_dvs_remove(struct platform_device *pdev) -{ - dev_info(&pdev->dev, "exiting\n"); - - /* disable any current dvs */ - gpio_set_value(OSIRIS_GPIO_DVS, 1); - osiris_dvs_tps_setdvs(false); - - cpufreq_unregister_notifier(&osiris_dvs_nb, - CPUFREQ_TRANSITION_NOTIFIER); - - gpio_free(OSIRIS_GPIO_DVS); - - return 0; -} - -/* the CONFIG_PM block is so small, it isn't worth actaully compiling it - * out if the configuration isn't set. */ - -static int osiris_dvs_suspend(struct device *dev) -{ - gpio_set_value(OSIRIS_GPIO_DVS, 1); - osiris_dvs_tps_setdvs(false); - cur_dvs = false; - - return 0; -} - -static int osiris_dvs_resume(struct device *dev) -{ - osiris_dvs_tps_setdvs(true); - return 0; -} - -static const struct dev_pm_ops osiris_dvs_pm = { - .suspend = osiris_dvs_suspend, - .resume = osiris_dvs_resume, -}; - -static struct platform_driver osiris_dvs_driver = { - .probe = osiris_dvs_probe, - .remove = __devexit_p(osiris_dvs_remove), - .driver = { - .name = "osiris-dvs", - .owner = THIS_MODULE, - .pm = &osiris_dvs_pm, - }, -}; - -static int __init osiris_dvs_init(void) -{ - return platform_driver_register(&osiris_dvs_driver); -} - -static void __exit osiris_dvs_exit(void) -{ - platform_driver_unregister(&osiris_dvs_driver); -} - -module_init(osiris_dvs_init); -module_exit(osiris_dvs_exit); - -MODULE_DESCRIPTION("Simtec OSIRIS DVS support"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:osiris-dvs"); diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c deleted file mode 100644 index 4c480ef734f..00000000000 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ /dev/null @@ -1,440 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/mach-osiris.c - * - * Copyright (c) 2005-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "common.h" - -/* onboard perihperal map */ - -static struct map_desc osiris_iodesc[] __initdata = { - /* ISA IO areas (may be over-written later) */ - - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(S3C2410_CS5), - .length = SZ_16M, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(S3C2410_CS5), - .length = SZ_16M, - .type = MT_DEVICE, - }, - - /* CPLD control registers */ - - { - .virtual = (u32)OSIRIS_VA_CTRL0, - .pfn = __phys_to_pfn(OSIRIS_PA_CTRL0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (u32)OSIRIS_VA_CTRL1, - .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (u32)OSIRIS_VA_CTRL2, - .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (u32)OSIRIS_VA_IDREG, - .pfn = __phys_to_pfn(OSIRIS_PA_IDREG), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - } -}; - -/* NAND Flash on Osiris board */ - -static int external_map[] = { 2 }; -static int chip0_map[] = { 0 }; -static int chip1_map[] = { 1 }; - -static struct mtd_partition __initdata osiris_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_16K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_16K, - .offset = SZ_16K, - }, - [2] = { - .name = "user1", - .offset = SZ_4M, - .size = SZ_32M - SZ_4M, - }, - [3] = { - .name = "user2", - .offset = SZ_32M, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition __initdata osiris_default_nand_part_large[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_128K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_128K, - .offset = SZ_128K, - }, - [2] = { - .name = "user1", - .offset = SZ_4M, - .size = SZ_32M - SZ_4M, - }, - [3] = { - .name = "user2", - .offset = SZ_32M, - .size = MTDPART_SIZ_FULL, - } -}; - -/* the Osiris has 3 selectable slots for nand-flash, the two - * on-board chip areas, as well as the external slot. - * - * Note, there is no current hot-plug support for the External - * socket. -*/ - -static struct s3c2410_nand_set __initdata osiris_nand_sets[] = { - [1] = { - .name = "External", - .nr_chips = 1, - .nr_map = external_map, - .options = NAND_SCAN_SILENT_NODEV, - .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), - .partitions = osiris_default_nand_part, - }, - [0] = { - .name = "chip0", - .nr_chips = 1, - .nr_map = chip0_map, - .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), - .partitions = osiris_default_nand_part, - }, - [2] = { - .name = "chip1", - .nr_chips = 1, - .nr_map = chip1_map, - .options = NAND_SCAN_SILENT_NODEV, - .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), - .partitions = osiris_default_nand_part, - }, -}; - -static void osiris_nand_select(struct s3c2410_nand_set *set, int slot) -{ - unsigned int tmp; - - slot = set->nr_map[slot] & 3; - - pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n", - slot, set, set->nr_map); - - tmp = __raw_readb(OSIRIS_VA_CTRL0); - tmp &= ~OSIRIS_CTRL0_NANDSEL; - tmp |= slot; - - pr_debug("osiris_nand: ctrl0 now %02x\n", tmp); - - __raw_writeb(tmp, OSIRIS_VA_CTRL0); -} - -static struct s3c2410_platform_nand __initdata osiris_nand_info = { - .tacls = 25, - .twrph0 = 60, - .twrph1 = 60, - .nr_sets = ARRAY_SIZE(osiris_nand_sets), - .sets = osiris_nand_sets, - .select_chip = osiris_nand_select, -}; - -/* PCMCIA control and configuration */ - -static struct resource osiris_pcmcia_resource[] = { - [0] = { - .start = 0x0f000000, - .end = 0x0f100000, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x0c000000, - .end = 0x0c100000, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device osiris_pcmcia = { - .name = "osiris-pcmcia", - .id = -1, - .num_resources = ARRAY_SIZE(osiris_pcmcia_resource), - .resource = osiris_pcmcia_resource, -}; - -/* Osiris power management device */ - -#ifdef CONFIG_PM -static unsigned char pm_osiris_ctrl0; - -static int osiris_pm_suspend(void) -{ - unsigned int tmp; - - pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0); - tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL; - - /* ensure correct NAND slot is selected on resume */ - if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0) - tmp |= 2; - - __raw_writeb(tmp, OSIRIS_VA_CTRL0); - - /* ensure that an nRESET is not generated on resume. */ - s3c2410_gpio_setpin(S3C2410_GPA(21), 1); - s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); - - return 0; -} - -static void osiris_pm_resume(void) -{ - if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8) - __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1); - - __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0); - - s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); -} - -#else -#define osiris_pm_suspend NULL -#define osiris_pm_resume NULL -#endif - -static struct syscore_ops osiris_pm_syscore_ops = { - .suspend = osiris_pm_suspend, - .resume = osiris_pm_resume, -}; - -/* Link for DVS driver to TPS65011 */ - -static void osiris_tps_release(struct device *dev) -{ - /* static device, do not need to release anything */ -} - -static struct platform_device osiris_tps_device = { - .name = "osiris-dvs", - .id = -1, - .dev.release = osiris_tps_release, -}; - -static int osiris_tps_setup(struct i2c_client *client, void *context) -{ - osiris_tps_device.dev.parent = &client->dev; - return platform_device_register(&osiris_tps_device); -} - -static int osiris_tps_remove(struct i2c_client *client, void *context) -{ - platform_device_unregister(&osiris_tps_device); - return 0; -} - -static struct tps65010_board osiris_tps_board = { - .base = -1, /* GPIO can go anywhere at the moment */ - .setup = osiris_tps_setup, - .teardown = osiris_tps_remove, -}; - -/* I2C devices fitted. */ - -static struct i2c_board_info osiris_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("tps65011", 0x48), - .irq = IRQ_EINT20, - .platform_data = &osiris_tps_board, - }, -}; - -/* Standard Osiris devices */ - -static struct platform_device *osiris_devices[] __initdata = { - &s3c_device_i2c0, - &s3c_device_wdt, - &s3c_device_nand, - &osiris_pcmcia, -}; - -static struct clk *osiris_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - -static struct s3c_cpufreq_board __initdata osiris_cpufreq = { - .refresh = 7800, /* refresh period is 7.8usec */ - .auto_io = 1, - .need_io = 1, -}; - -static void __init osiris_map_io(void) -{ - unsigned long flags; - - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks)); - - s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); - s3c24xx_init_clocks(0); - s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); - - /* check for the newer revision boards with large page nand */ - - if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) { - printk(KERN_INFO "OSIRIS-B detected (revision %d)\n", - __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK); - osiris_nand_sets[0].partitions = osiris_default_nand_part_large; - osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large); - } else { - /* write-protect line to the NAND */ - s3c2410_gpio_setpin(S3C2410_GPA(0), 1); - } - - /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */ - - local_irq_save(flags); - __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON); - local_irq_restore(flags); -} - -static void __init osiris_init(void) -{ - register_syscore_ops(&osiris_pm_syscore_ops); - - s3c_i2c0_set_platdata(NULL); - s3c_nand_set_platdata(&osiris_nand_info); - - s3c_cpufreq_setboard(&osiris_cpufreq); - - i2c_register_board_info(0, osiris_i2c_devs, - ARRAY_SIZE(osiris_i2c_devs)); - - platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices)); -}; - -MACHINE_START(OSIRIS, "Simtec-OSIRIS") - /* Maintainer: Ben Dooks */ - .atag_offset = 0x100, - .map_io = osiris_map_io, - .init_irq = s3c24xx_init_irq, - .init_machine = osiris_init, - .timer = &s3c24xx_timer, - .restart = s3c2440_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c deleted file mode 100644 index 80077f6472e..00000000000 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ /dev/null @@ -1,826 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/mach-rx1950.c - * - * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev, - * Copyright (c) 2007-2010 Vasily Khoruzhick - * - * based on smdk2440 written by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "common.h" - -#define LCD_PWM_PERIOD 192960 -#define LCD_PWM_DUTY 127353 - -static struct map_desc rx1950_iodesc[] __initdata = { -}; - -static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - .clk_sel = S3C2410_UCON_CLKSEL3, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - .clk_sel = S3C2410_UCON_CLKSEL3, - }, - /* IR port */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0xf1, - .clk_sel = S3C2410_UCON_CLKSEL3, - }, -}; - -static struct s3c2410fb_display rx1950_display = { - .type = S3C2410_LCDCON1_TFT, - .width = 240, - .height = 320, - .xres = 240, - .yres = 320, - .bpp = 16, - - .pixclock = 260000, - .left_margin = 10, - .right_margin = 20, - .hsync_len = 10, - .upper_margin = 2, - .lower_margin = 2, - .vsync_len = 2, - - .lcdcon5 = S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVCLK | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_HWSWP | - (0x02 << 13) | - (0x02 << 15), - -}; - -static int power_supply_init(struct device *dev) -{ - return gpio_request(S3C2410_GPF(2), "cable plugged"); -} - -static int rx1950_is_ac_online(void) -{ - return !gpio_get_value(S3C2410_GPF(2)); -} - -static void power_supply_exit(struct device *dev) -{ - gpio_free(S3C2410_GPF(2)); -} - -static char *rx1950_supplicants[] = { - "main-battery" -}; - -static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = rx1950_is_ac_online, - .exit = power_supply_exit, - .supplied_to = rx1950_supplicants, - .num_supplicants = ARRAY_SIZE(rx1950_supplicants), -}; - -static struct resource power_supply_resources[] = { - [0] = { - .name = "ac", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | - IORESOURCE_IRQ_HIGHEDGE, - .start = IRQ_EINT2, - .end = IRQ_EINT2, - }, -}; - -static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { - .platform_data = - &power_supply_info, - }, - .resource = power_supply_resources, - .num_resources = ARRAY_SIZE(power_supply_resources), -}; - -static const struct s3c_adc_bat_thresh bat_lut_noac[] = { - { .volt = 4100, .cur = 156, .level = 100}, - { .volt = 4050, .cur = 156, .level = 95}, - { .volt = 4025, .cur = 141, .level = 90}, - { .volt = 3995, .cur = 144, .level = 85}, - { .volt = 3957, .cur = 162, .level = 80}, - { .volt = 3931, .cur = 147, .level = 75}, - { .volt = 3902, .cur = 147, .level = 70}, - { .volt = 3863, .cur = 153, .level = 65}, - { .volt = 3838, .cur = 150, .level = 60}, - { .volt = 3800, .cur = 153, .level = 55}, - { .volt = 3765, .cur = 153, .level = 50}, - { .volt = 3748, .cur = 172, .level = 45}, - { .volt = 3740, .cur = 153, .level = 40}, - { .volt = 3714, .cur = 175, .level = 35}, - { .volt = 3710, .cur = 156, .level = 30}, - { .volt = 3963, .cur = 156, .level = 25}, - { .volt = 3672, .cur = 178, .level = 20}, - { .volt = 3651, .cur = 178, .level = 15}, - { .volt = 3629, .cur = 178, .level = 10}, - { .volt = 3612, .cur = 162, .level = 5}, - { .volt = 3605, .cur = 162, .level = 0}, -}; - -static const struct s3c_adc_bat_thresh bat_lut_acin[] = { - { .volt = 4200, .cur = 0, .level = 100}, - { .volt = 4190, .cur = 0, .level = 99}, - { .volt = 4178, .cur = 0, .level = 95}, - { .volt = 4110, .cur = 0, .level = 70}, - { .volt = 4076, .cur = 0, .level = 65}, - { .volt = 4046, .cur = 0, .level = 60}, - { .volt = 4021, .cur = 0, .level = 55}, - { .volt = 3999, .cur = 0, .level = 50}, - { .volt = 3982, .cur = 0, .level = 45}, - { .volt = 3965, .cur = 0, .level = 40}, - { .volt = 3957, .cur = 0, .level = 35}, - { .volt = 3948, .cur = 0, .level = 30}, - { .volt = 3936, .cur = 0, .level = 25}, - { .volt = 3927, .cur = 0, .level = 20}, - { .volt = 3906, .cur = 0, .level = 15}, - { .volt = 3880, .cur = 0, .level = 10}, - { .volt = 3829, .cur = 0, .level = 5}, - { .volt = 3820, .cur = 0, .level = 0}, -}; - -int rx1950_bat_init(void) -{ - int ret; - - ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1"); - if (ret) - goto err_gpio1; - ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2"); - if (ret) - goto err_gpio2; - - return 0; - -err_gpio2: - gpio_free(S3C2410_GPJ(2)); -err_gpio1: - return ret; -} - -void rx1950_bat_exit(void) -{ - gpio_free(S3C2410_GPJ(2)); - gpio_free(S3C2410_GPJ(3)); -} - -void rx1950_enable_charger(void) -{ - gpio_direction_output(S3C2410_GPJ(2), 1); - gpio_direction_output(S3C2410_GPJ(3), 1); -} - -void rx1950_disable_charger(void) -{ - gpio_direction_output(S3C2410_GPJ(2), 0); - gpio_direction_output(S3C2410_GPJ(3), 0); -} - -DEFINE_SPINLOCK(rx1950_blink_spin); - -static int rx1950_led_blink_set(unsigned gpio, int state, - unsigned long *delay_on, unsigned long *delay_off) -{ - int blink_gpio, check_gpio; - - switch (gpio) { - case S3C2410_GPA(6): - blink_gpio = S3C2410_GPA(4); - check_gpio = S3C2410_GPA(3); - break; - case S3C2410_GPA(7): - blink_gpio = S3C2410_GPA(3); - check_gpio = S3C2410_GPA(4); - break; - default: - return -EINVAL; - break; - } - - if (delay_on && delay_off && !*delay_on && !*delay_off) - *delay_on = *delay_off = 500; - - spin_lock(&rx1950_blink_spin); - - switch (state) { - case GPIO_LED_NO_BLINK_LOW: - case GPIO_LED_NO_BLINK_HIGH: - if (!gpio_get_value(check_gpio)) - gpio_set_value(S3C2410_GPJ(6), 0); - gpio_set_value(blink_gpio, 0); - gpio_set_value(gpio, state); - break; - case GPIO_LED_BLINK: - gpio_set_value(gpio, 0); - gpio_set_value(S3C2410_GPJ(6), 1); - gpio_set_value(blink_gpio, 1); - break; - } - - spin_unlock(&rx1950_blink_spin); - - return 0; -} - -static struct gpio_led rx1950_leds_desc[] = { - { - .name = "Green", - .default_trigger = "main-battery-full", - .gpio = S3C2410_GPA(6), - .retain_state_suspended = 1, - }, - { - .name = "Red", - .default_trigger - = "main-battery-charging-blink-full-solid", - .gpio = S3C2410_GPA(7), - .retain_state_suspended = 1, - }, - { - .name = "Blue", - .default_trigger = "rx1950-acx-mem", - .gpio = S3C2410_GPA(11), - .retain_state_suspended = 1, - }, -}; - -static struct gpio_led_platform_data rx1950_leds_pdata = { - .num_leds = ARRAY_SIZE(rx1950_leds_desc), - .leds = rx1950_leds_desc, - .gpio_blink_set = rx1950_led_blink_set, -}; - -static struct platform_device rx1950_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &rx1950_leds_pdata, - }, -}; - -static struct s3c_adc_bat_pdata rx1950_bat_cfg = { - .init = rx1950_bat_init, - .exit = rx1950_bat_exit, - .enable_charger = rx1950_enable_charger, - .disable_charger = rx1950_disable_charger, - .gpio_charge_finished = S3C2410_GPF(3), - .lut_noac = bat_lut_noac, - .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac), - .lut_acin = bat_lut_acin, - .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin), - .volt_channel = 0, - .current_channel = 1, - .volt_mult = 4235, - .current_mult = 2900, - .internal_impedance = 200, -}; - -static struct platform_device rx1950_battery = { - .name = "s3c-adc-battery", - .id = -1, - .dev = { - .parent = &s3c_device_adc.dev, - .platform_data = &rx1950_bat_cfg, - }, -}; - -static struct s3c2410fb_mach_info rx1950_lcd_cfg = { - .displays = &rx1950_display, - .num_displays = 1, - .default_display = 0, - - .lpcsel = 0x02, - .gpccon = 0xaa9556a9, - .gpccon_mask = 0xffc003fc, - .gpcup = 0x0000ffff, - .gpcup_mask = 0xffffffff, - - .gpdcon = 0xaa90aaa1, - .gpdcon_mask = 0xffc0fff0, - .gpdup = 0x0000fcfd, - .gpdup_mask = 0xffffffff, - -}; - -static struct pwm_device *lcd_pwm; - -void rx1950_lcd_power(int enable) -{ - int i; - static int enabled; - if (enabled == enable) - return; - if (!enable) { - - /* GPC11-GPC15->OUTPUT */ - for (i = 11; i < 16; i++) - gpio_direction_output(S3C2410_GPC(i), 1); - - /* Wait a bit here... */ - mdelay(100); - - /* GPD2-GPD7->OUTPUT */ - /* GPD11-GPD15->OUTPUT */ - /* GPD2-GPD7->1, GPD11-GPD15->1 */ - for (i = 2; i < 8; i++) - gpio_direction_output(S3C2410_GPD(i), 1); - for (i = 11; i < 16; i++) - gpio_direction_output(S3C2410_GPD(i), 1); - - /* Wait a bit here...*/ - mdelay(100); - - /* GPB0->OUTPUT, GPB0->0 */ - gpio_direction_output(S3C2410_GPB(0), 0); - - /* GPC1-GPC4->OUTPUT, GPC1-4->0 */ - for (i = 1; i < 5; i++) - gpio_direction_output(S3C2410_GPC(i), 0); - - /* GPC15-GPC11->0 */ - for (i = 11; i < 16; i++) - gpio_direction_output(S3C2410_GPC(i), 0); - - /* GPD15-GPD11->0, GPD2->GPD7->0 */ - for (i = 11; i < 16; i++) - gpio_direction_output(S3C2410_GPD(i), 0); - - for (i = 2; i < 8; i++) - gpio_direction_output(S3C2410_GPD(i), 0); - - /* GPC6->0, GPC7->0, GPC5->0 */ - gpio_direction_output(S3C2410_GPC(6), 0); - gpio_direction_output(S3C2410_GPC(7), 0); - gpio_direction_output(S3C2410_GPC(5), 0); - - /* GPB1->OUTPUT, GPB1->0 */ - gpio_direction_output(S3C2410_GPB(1), 0); - pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD); - pwm_disable(lcd_pwm); - - /* GPC0->0, GPC10->0 */ - gpio_direction_output(S3C2410_GPC(0), 0); - gpio_direction_output(S3C2410_GPC(10), 0); - } else { - pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD); - pwm_enable(lcd_pwm); - - gpio_direction_output(S3C2410_GPC(0), 1); - gpio_direction_output(S3C2410_GPC(5), 1); - - s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1); - gpio_direction_output(S3C2410_GPC(7), 1); - - for (i = 1; i < 5; i++) - s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2)); - - for (i = 11; i < 16; i++) - s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2)); - - for (i = 2; i < 8; i++) - s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2)); - - for (i = 11; i < 16; i++) - s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2)); - - gpio_direction_output(S3C2410_GPC(10), 1); - gpio_direction_output(S3C2410_GPC(6), 1); - } - enabled = enable; -} - -static void rx1950_bl_power(int enable) -{ - static int enabled; - if (enabled == enable) - return; - if (!enable) { - gpio_direction_output(S3C2410_GPB(0), 0); - } else { - /* LED driver need a "push" to power on */ - gpio_direction_output(S3C2410_GPB(0), 1); - /* Warm up backlight for one period of PWM. - * Without this trick its almost impossible to - * enable backlight with low brightness value - */ - ndelay(48000); - s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); - } - enabled = enable; -} - -static int rx1950_backlight_init(struct device *dev) -{ - WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight")); - lcd_pwm = pwm_request(1, "RX1950 LCD"); - if (IS_ERR(lcd_pwm)) { - dev_err(dev, "Unable to request PWM for LCD power!\n"); - return PTR_ERR(lcd_pwm); - } - - rx1950_lcd_power(1); - rx1950_bl_power(1); - - return 0; -} - -static void rx1950_backlight_exit(struct device *dev) -{ - rx1950_bl_power(0); - rx1950_lcd_power(0); - - pwm_free(lcd_pwm); - gpio_free(S3C2410_GPB(0)); -} - - -static int rx1950_backlight_notify(struct device *dev, int brightness) -{ - if (!brightness) { - rx1950_bl_power(0); - rx1950_lcd_power(0); - } else { - rx1950_lcd_power(1); - rx1950_bl_power(1); - } - return brightness; -} - -static struct platform_pwm_backlight_data rx1950_backlight_data = { - .pwm_id = 0, - .max_brightness = 24, - .dft_brightness = 4, - .pwm_period_ns = 48000, - .init = rx1950_backlight_init, - .notify = rx1950_backlight_notify, - .exit = rx1950_backlight_exit, -}; - -static struct platform_device rx1950_backlight = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[0].dev, - .platform_data = &rx1950_backlight_data, - }, -}; - -static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd) -{ - switch (power_mode) { - case MMC_POWER_OFF: - gpio_direction_output(S3C2410_GPJ(1), 0); - break; - case MMC_POWER_UP: - case MMC_POWER_ON: - gpio_direction_output(S3C2410_GPJ(1), 1); - break; - default: - break; - } -} - -static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = { - .gpio_detect = S3C2410_GPF(5), - .gpio_wprotect = S3C2410_GPH(8), - .set_power = rx1950_set_mmc_power, - .ocr_avail = MMC_VDD_32_33, -}; - -static struct mtd_partition rx1950_nand_part[] = { - [0] = { - .name = "Boot0", - .offset = 0, - .size = 0x4000, - .mask_flags = MTD_WRITEABLE, - }, - [1] = { - .name = "Boot1", - .offset = MTDPART_OFS_APPEND, - .size = 0x40000, - .mask_flags = MTD_WRITEABLE, - }, - [2] = { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 0x300000, - .mask_flags = 0, - }, - [3] = { - .name = "Filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static struct s3c2410_nand_set rx1950_nand_sets[] = { - [0] = { - .name = "Internal", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(rx1950_nand_part), - .partitions = rx1950_nand_part, - }, -}; - -static struct s3c2410_platform_nand rx1950_nand_info = { - .tacls = 25, - .twrph0 = 50, - .twrph1 = 15, - .nr_sets = ARRAY_SIZE(rx1950_nand_sets), - .sets = rx1950_nand_sets, -}; - -static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(5), - .vbus_pin_inverted = 1, - .pullup_pin = S3C2410_GPJ(5), -}; - -static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 3, -}; - -static struct gpio_keys_button rx1950_gpio_keys_table[] = { - { - .code = KEY_POWER, - .gpio = S3C2410_GPF(0), - .active_low = 1, - .desc = "Power button", - .wakeup = 1, - }, - { - .code = KEY_F5, - .gpio = S3C2410_GPF(7), - .active_low = 1, - .desc = "Record button", - }, - { - .code = KEY_F1, - .gpio = S3C2410_GPG(0), - .active_low = 1, - .desc = "Calendar button", - }, - { - .code = KEY_F2, - .gpio = S3C2410_GPG(2), - .active_low = 1, - .desc = "Contacts button", - }, - { - .code = KEY_F3, - .gpio = S3C2410_GPG(3), - .active_low = 1, - .desc = "Mail button", - }, - { - .code = KEY_F4, - .gpio = S3C2410_GPG(7), - .active_low = 1, - .desc = "WLAN button", - }, - { - .code = KEY_LEFT, - .gpio = S3C2410_GPG(10), - .active_low = 1, - .desc = "Left button", - }, - { - .code = KEY_RIGHT, - .gpio = S3C2410_GPG(11), - .active_low = 1, - .desc = "Right button", - }, - { - .code = KEY_UP, - .gpio = S3C2410_GPG(4), - .active_low = 1, - .desc = "Up button", - }, - { - .code = KEY_DOWN, - .gpio = S3C2410_GPG(6), - .active_low = 1, - .desc = "Down button", - }, - { - .code = KEY_ENTER, - .gpio = S3C2410_GPG(9), - .active_low = 1, - .desc = "Ok button" - }, -}; - -static struct gpio_keys_platform_data rx1950_gpio_keys_data = { - .buttons = rx1950_gpio_keys_table, - .nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table), -}; - -static struct platform_device rx1950_device_gpiokeys = { - .name = "gpio-keys", - .dev.platform_data = &rx1950_gpio_keys_data, -}; - -static struct uda1380_platform_data uda1380_info = { - .gpio_power = S3C2410_GPJ(0), - .gpio_reset = S3C2410_GPD(0), - .dac_clk = UDA1380_DAC_CLK_SYSCLK, -}; - -static struct i2c_board_info rx1950_i2c_devices[] = { - { - I2C_BOARD_INFO("uda1380", 0x1a), - .platform_data = &uda1380_info, - }, -}; - -static struct platform_device *rx1950_devices[] __initdata = { - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &samsung_asoc_dma, - &s3c_device_usbgadget, - &s3c_device_rtc, - &s3c_device_nand, - &s3c_device_sdi, - &s3c_device_adc, - &s3c_device_ts, - &s3c_device_timer[0], - &s3c_device_timer[1], - &rx1950_backlight, - &rx1950_device_gpiokeys, - &power_supply, - &rx1950_battery, - &rx1950_leds, -}; - -static struct clk *rx1950_clocks[] __initdata = { - &s3c24xx_clkout0, - &s3c24xx_clkout1, -}; - -static void __init rx1950_map_io(void) -{ - s3c24xx_clkout0.parent = &clk_h; - s3c24xx_clkout1.parent = &clk_f; - - s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks)); - - s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); - s3c24xx_init_clocks(16934000); - s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); - - /* setup PM */ - -#ifdef CONFIG_PM_H1940 - memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8); -#endif - - s3c_pm_init(); -} - -static void __init rx1950_init_machine(void) -{ - int i; - - s3c24xx_fb_set_platdata(&rx1950_lcd_cfg); - s3c24xx_udc_set_platdata(&rx1950_udc_cfg); - s3c24xx_ts_set_platdata(&rx1950_ts_cfg); - s3c24xx_mci_set_platdata(&rx1950_mmc_cfg); - s3c_i2c0_set_platdata(NULL); - s3c_nand_set_platdata(&rx1950_nand_info); - - /* Turn off suspend on both USB ports, and switch the - * selectable USB port to USB device mode. */ - s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | - S3C2410_MISCCR_USBSUSPND0 | - S3C2410_MISCCR_USBSUSPND1, 0x0); - - /* mmc power is disabled by default */ - WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power")); - gpio_direction_output(S3C2410_GPJ(1), 0); - - for (i = 0; i < 8; i++) - WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power")); - - for (i = 10; i < 16; i++) - WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power")); - - for (i = 2; i < 8; i++) - WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power")); - - for (i = 11; i < 16; i++) - WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power")); - - WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power")); - - WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink")); - WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink")); - WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink")); - gpio_direction_output(S3C2410_GPA(3), 0); - gpio_direction_output(S3C2410_GPA(4), 0); - gpio_direction_output(S3C2410_GPJ(6), 0); - - platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); - - i2c_register_board_info(0, rx1950_i2c_devices, - ARRAY_SIZE(rx1950_i2c_devices)); -} - -/* H1940 and RX3715 need to reserve this for suspend */ -static void __init rx1950_reserve(void) -{ - memblock_reserve(0x30003000, 0x1000); - memblock_reserve(0x30081000, 0x1000); -} - -MACHINE_START(RX1950, "HP iPAQ RX1950") - /* Maintainers: Vasily Khoruzhick */ - .atag_offset = 0x100, - .map_io = rx1950_map_io, - .reserve = rx1950_reserve, - .init_irq = s3c24xx_init_irq, - .init_machine = rx1950_init_machine, - .timer = &s3c24xx_timer, - .restart = s3c2440_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c deleted file mode 100644 index 20103bafbd4..00000000000 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/mach-rx3715.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * http://www.handhelds.org/projects/rx3715.html - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "common.h" - -static struct map_desc rx3715_iodesc[] __initdata = { - /* dump ISA space somewhere unused */ - - { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(S3C2410_CS3), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(S3C2410_CS3), - .length = SZ_1M, - .type = MT_DEVICE, - }, -}; - -static struct s3c2410_uartcfg rx3715_uartcfgs[] = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - .clk_sel = S3C2410_UCON_CLKSEL3, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x00, - .clk_sel = S3C2410_UCON_CLKSEL3, - }, - /* IR port */ - [2] = { - .hwport = 2, - .uart_flags = UPF_CONS_FLOW, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0x51, - .clk_sel = S3C2410_UCON_CLKSEL3, - } -}; - -/* framebuffer lcd controller information */ - -static struct s3c2410fb_display rx3715_lcdcfg __initdata = { - .lcdcon5 = S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_HWSWP, - - .type = S3C2410_LCDCON1_TFT, - .width = 240, - .height = 320, - - .pixclock = 260000, - .xres = 240, - .yres = 320, - .bpp = 16, - .left_margin = 36, - .right_margin = 36, - .hsync_len = 8, - .upper_margin = 6, - .lower_margin = 7, - .vsync_len = 3, -}; - -static struct s3c2410fb_mach_info rx3715_fb_info __initdata = { - - .displays = &rx3715_lcdcfg, - .num_displays = 1, - .default_display = 0, - - .lpcsel = 0xf82, - - .gpccon = 0xaa955699, - .gpccon_mask = 0xffc003cc, - .gpcup = 0x0000ffff, - .gpcup_mask = 0xffffffff, - - .gpdcon = 0xaa95aaa1, - .gpdcon_mask = 0xffc0fff0, - .gpdup = 0x0000faff, - .gpdup_mask = 0xffffffff, -}; - -static struct mtd_partition __initdata rx3715_nand_part[] = { - [0] = { - .name = "Whole Flash", - .offset = 0, - .size = MTDPART_SIZ_FULL, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = { - [0] = { - .name = "Internal", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(rx3715_nand_part), - .partitions = rx3715_nand_part, - }, -}; - -static struct s3c2410_platform_nand __initdata rx3715_nand_info = { - .tacls = 25, - .twrph0 = 50, - .twrph1 = 15, - .nr_sets = ARRAY_SIZE(rx3715_nand_sets), - .sets = rx3715_nand_sets, -}; - -static struct platform_device *rx3715_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_nand, -}; - -static void __init rx3715_map_io(void) -{ - s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); - s3c24xx_init_clocks(16934000); - s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); -} - -/* H1940 and RX3715 need to reserve this for suspend */ -static void __init rx3715_reserve(void) -{ - memblock_reserve(0x30003000, 0x1000); - memblock_reserve(0x30081000, 0x1000); -} - -static void __init rx3715_init_irq(void) -{ - s3c24xx_init_irq(); -} - -static void __init rx3715_init_machine(void) -{ -#ifdef CONFIG_PM_H1940 - memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); -#endif - s3c_pm_init(); - - s3c_nand_set_platdata(&rx3715_nand_info); - s3c24xx_fb_set_platdata(&rx3715_fb_info); - platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices)); -} - -MACHINE_START(RX3715, "IPAQ-RX3715") - /* Maintainer: Ben Dooks */ - .atag_offset = 0x100, - .map_io = rx3715_map_io, - .reserve = rx3715_reserve, - .init_irq = rx3715_init_irq, - .init_machine = rx3715_init_machine, - .timer = &s3c24xx_timer, - .restart = s3c2440_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c deleted file mode 100644 index 1deb60d12a6..00000000000 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ /dev/null @@ -1,187 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks - * - * http://www.fluff.org/ben/smdk2440/ - * - * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#include "common.h" - -static struct map_desc smdk2440_iodesc[] __initdata = { - /* ISA IO Space map (memory space selected by A24) */ - - { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(S3C2410_CS2), - .length = 0x10000, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, - .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), - .length = SZ_4M, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(S3C2410_CS2), - .length = 0x10000, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, - .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), - .length = SZ_4M, - .type = MT_DEVICE, - } -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - /* IR port */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0x51, - } -}; - -/* LCD driver info */ - -static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = { - - .lcdcon5 = S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_PWREN | - S3C2410_LCDCON5_HWSWP, - - .type = S3C2410_LCDCON1_TFT, - - .width = 240, - .height = 320, - - .pixclock = 166667, /* HCLK 60 MHz, divisor 10 */ - .xres = 240, - .yres = 320, - .bpp = 16, - .left_margin = 20, - .right_margin = 8, - .hsync_len = 4, - .upper_margin = 8, - .lower_margin = 7, - .vsync_len = 4, -}; - -static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = { - .displays = &smdk2440_lcd_cfg, - .num_displays = 1, - .default_display = 0, - -#if 0 - /* currently setup by downloader */ - .gpccon = 0xaa940659, - .gpccon_mask = 0xffffffff, - .gpcup = 0x0000ffff, - .gpcup_mask = 0xffffffff, - .gpdcon = 0xaa84aaa0, - .gpdcon_mask = 0xffffffff, - .gpdup = 0x0000faff, - .gpdup_mask = 0xffffffff, -#endif - - .lpcsel = ((0xCE6) & ~7) | 1<<4, -}; - -static struct platform_device *smdk2440_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, -}; - -static void __init smdk2440_map_io(void) -{ - s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); - s3c24xx_init_clocks(16934400); - s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); -} - -static void __init smdk2440_machine_init(void) -{ - s3c24xx_fb_set_platdata(&smdk2440_fb_info); - s3c_i2c0_set_platdata(NULL); - - platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices)); - smdk_machine_init(); -} - -MACHINE_START(S3C2440, "SMDK2440") - /* Maintainer: Ben Dooks */ - .atag_offset = 0x100, - - .init_irq = s3c24xx_init_irq, - .map_io = smdk2440_map_io, - .init_machine = smdk2440_machine_init, - .timer = &s3c24xx_timer, - .restart = s3c2440_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c deleted file mode 100644 index 517623a09fc..00000000000 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ /dev/null @@ -1,88 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/s3c2440.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks - * - * Samsung S3C2440 Mobile CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include - -static struct device s3c2440_dev = { - .bus = &s3c2440_subsys, -}; - -int __init s3c2440_init(void) -{ - printk("S3C2440: Initialising architecture\n"); - - /* change irq for watchdog */ - - s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; - s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT; - - /* register suspend/resume handlers */ - -#ifdef CONFIG_PM - register_syscore_ops(&s3c2410_pm_syscore_ops); -#endif - register_syscore_ops(&s3c244x_pm_syscore_ops); - register_syscore_ops(&s3c24xx_irq_syscore_ops); - - /* register our system device for everything else */ - - return device_register(&s3c2440_dev); -} - -void __init s3c2440_map_io(void) -{ - s3c244x_map_io(); - - s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; - s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; -} - -void s3c2440_restart(char mode, const char *cmd) -{ - if (mode == 's') { - soft_restart(0); - } - - arch_wdt_reset(); - - /* we'll take a jump through zero as a poor second */ - soft_restart(0); -} diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c deleted file mode 100644 index 8004e0497bf..00000000000 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ /dev/null @@ -1,188 +0,0 @@ -/* linux/arch/arm/mach-s3c2442/s3c2442.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2442 core and lock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include -#include -#include -#include - -#include -#include -#include - -/* S3C2442 extended clock support */ - -static unsigned long s3c2442_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - - if (div == 3) - return parent_rate / 3; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div /= 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2442_camif_upll_round(clk, rate); - - camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3; - - if (rate == parent_rate) { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL; - } else if ((parent_rate / rate) == 3) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3; - } else { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK; - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -/* Extra S3C2442 clocks */ - -static struct clk s3c2442_clk_cam = { - .name = "camif", - .id = -1, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2442_clk_cam_upll = { - .name = "camif-upll", - .id = -1, - .ops = &(struct clk_ops) { - .set_rate = s3c2442_camif_upll_setrate, - .round_rate = s3c2442_camif_upll_round, - }, -}; - -static int s3c2442_clk_add(struct device *dev) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2442: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2442_clk_cam.parent = clock_h; - s3c2442_clk_cam_upll.parent = clock_upll; - - s3c24xx_register_clock(&s3c2442_clk_cam); - s3c24xx_register_clock(&s3c2442_clk_cam_upll); - - clk_disable(&s3c2442_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c2442_clk_add, -}; - -static __init int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); - - -static struct device s3c2442_dev = { - .bus = &s3c2442_subsys, -}; - -int __init s3c2442_init(void) -{ - printk("S3C2442: Initialising architecture\n"); - -#ifdef CONFIG_PM - register_syscore_ops(&s3c2410_pm_syscore_ops); -#endif - register_syscore_ops(&s3c244x_pm_syscore_ops); - register_syscore_ops(&s3c24xx_irq_syscore_ops); - - return device_register(&s3c2442_dev); -} - -void __init s3c2442_map_io(void) -{ - s3c244x_map_io(); - - s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down; - s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down; -} diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c deleted file mode 100644 index b3fdbdda3d5..00000000000 --- a/arch/arm/mach-s3c2440/s3c244x-clock.c +++ /dev/null @@ -1,141 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c - * - * Copyright (c) 2004-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2440/S3C2442 Common clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include -#include - -static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long camdivn; - unsigned long dvs; - - if (parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2440_CAMDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - camdivn = __raw_readl(S3C2440_CAMDIVN); - camdivn &= ~S3C2440_CAMDIVN_DVSEN; - camdivn |= dvs; - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .ops = &(struct clk_ops) { - .set_parent = s3c2440_setparent_armclk, - }, -}; - -static int s3c244x_clk_add(struct device *dev) -{ - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; - struct clk *clock_upll; - int ret; - - printk("S3C244X: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - - clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; - - ret = s3c24xx_register_clock(&clk_arm); - if (ret < 0) { - printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); - return ret; - } - - clock_upll = clk_get(NULL, "upll"); - if (IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); - return -ENOENT; - } - - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - spin_lock(&clocks_lock); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - spin_unlock(&clocks_lock); - } - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2440_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c2440_clk_init); - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c deleted file mode 100644 index 74d3dcf46a4..00000000000 --- a/arch/arm/mach-s3c2440/s3c244x-irq.c +++ /dev/null @@ -1,142 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#include -#include - -#include -#include -#include - -/* camera irq */ - -static void s3c_irq_demux_cam(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 11; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_CAM_C); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_CAM_P); - } - } -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) - -static void -s3c_irq_cam_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11); -} - -static void -s3c_irq_cam_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CAM); -} - -static void -s3c_irq_cam_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11); -} - -static struct irq_chip s3c_irq_cam = { - .irq_mask = s3c_irq_cam_mask, - .irq_unmask = s3c_irq_cam_unmask, - .irq_ack = s3c_irq_cam_ack, -}; - -static int s3c244x_irq_add(struct device *dev) -{ - unsigned int irqno; - - irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip, - handle_level_irq); - set_irq_flags(IRQ_NFCON, IRQF_VALID); - - /* add chained handler for camera */ - - irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam); - - for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_cam, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - -static struct subsys_interface s3c2442_irq_interface = { - .name = "s3c2442_irq", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_irq_add, -}; - - -static int s3c2442_irq_init(void) -{ - return subsys_interface_register(&s3c2442_irq_interface); -} - -arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c deleted file mode 100644 index 36bc60f61d0..00000000000 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ /dev/null @@ -1,198 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks - * - * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -static struct map_desc s3c244x_iodesc[] __initdata = { - IODESC_ENT(CLKPWR), - IODESC_ENT(TIMER), - IODESC_ENT(WATCHDOG), -}; - -/* uart initialisation */ - -void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); -} - -void __init s3c244x_map_io(void) -{ - /* register our io-tables */ - - iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc)); - - /* rename any peripherals used differing from the s3c2410 */ - - s3c_device_sdi.name = "s3c2440-sdi"; - s3c_device_i2c0.name = "s3c2440-i2c"; - s3c_nand_setname("s3c2440-nand"); - s3c_device_ts.name = "s3c2440-ts"; - s3c_device_usbgadget.name = "s3c2440-usbgadget"; -} - -void __init_or_cpufreq s3c244x_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long clkdiv; - unsigned long camdiv; - unsigned long xtal; - unsigned long hclk, fclk, pclk; - int hdiv = 1; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - /* work out clock scalings */ - - switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) { - case S3C2440_CLKDIVN_HDIVN_1: - hdiv = 1; - break; - - case S3C2440_CLKDIVN_HDIVN_2: - hdiv = 2; - break; - - case S3C2440_CLKDIVN_HDIVN_4_8: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4; - break; - - case S3C2440_CLKDIVN_HDIVN_3_6: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3; - break; - } - - hclk = fclk / hdiv; - pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brief summary of clocks, etc */ - - printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c244x_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them, and to add new ones after the initialisation - */ - - s3c24xx_register_baseclocks(xtal); - s3c244x_setup_clocks(); - s3c2410_baseclk_add(); -} - -/* Since the S3C2442 and S3C2440 share items, put both subsystems here */ - -struct bus_type s3c2440_subsys = { - .name = "s3c2440-core", - .dev_name = "s3c2440-core", -}; - -struct bus_type s3c2442_subsys = { - .name = "s3c2442-core", - .dev_name = "s3c2442-core", -}; - -/* need to register the subsystem before we actually register the device, and - * we also need to ensure that it has been initialised before any of the - * drivers even try to use it (even if not on an s3c2440 based system) - * as a driver which may support both 2410 and 2440 may try and use it. -*/ - -static int __init s3c2440_core_init(void) -{ - return subsys_system_register(&s3c2440_subsys, NULL); -} - -core_initcall(s3c2440_core_init); - -static int __init s3c2442_core_init(void) -{ - return subsys_system_register(&s3c2442_subsys, NULL); -} - -core_initcall(s3c2442_core_init); - - -#ifdef CONFIG_PM -static struct sleep_save s3c244x_sleep[] = { - SAVE_ITEM(S3C2440_DSC0), - SAVE_ITEM(S3C2440_DSC1), - SAVE_ITEM(S3C2440_GPJDAT), - SAVE_ITEM(S3C2440_GPJCON), - SAVE_ITEM(S3C2440_GPJUP) -}; - -static int s3c244x_suspend(void) -{ - s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); - return 0; -} - -static void s3c244x_resume(void) -{ - s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); -} -#else -#define s3c244x_suspend NULL -#define s3c244x_resume NULL -#endif - -struct syscore_ops s3c244x_pm_syscore_ops = { - .suspend = s3c244x_suspend, - .resume = s3c244x_resume, -}; diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 9dda29e82bb..d8d156c0881 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -47,12 +47,35 @@ config CPU_S3C2416 help Support for the S3C2416 SoC from the S3C24XX line +config CPU_S3C2440 + bool "SAMSUNG S3C2440" + select CPU_ARM920T + select CPU_LLSERIAL_S3C2440 + select S3C2410_CLOCK + select S3C2410_PM if PM + select S3C2440_DMA if S3C24XX_DMA + help + Support for S3C2440 Samsung Mobile CPU based systems. + +config CPU_S3C2442 + bool "SAMSUNG S3C2442" + select CPU_ARM920T + select CPU_LLSERIAL_S3C2440 + select S3C2410_CLOCK + select S3C2410_PM if PM + help + Support for S3C2442 Samsung Mobile CPU based systems. + +config CPU_S3C244X + def_bool y + depends on CPU_S3C2440 || CPU_S3C2442 + if CPU_S3C2410 config S3C2410_DMA bool - depends on S3C24XX_DMA && CPU_S3C2410 - default y if CPU_S3C2410 + depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) + default y if CPU_S3C2410 || CPU_S3C2442 help DMA device selection for S3C2410 and compatible CPUs @@ -295,6 +318,148 @@ config MACH_SMDK2416 endif # CPU_S3C2416 +if CPU_S3C2440 + +config S3C2440_DMA + bool + help + Support for S3C2440 specific DMA code5A + +comment "S3C2440 Boards" + +# +# The "S3C2440 Boards" list is ordered alphabetically by option text. +# (without ARCH_ or MACH_) +# + +config MACH_ANUBIS + bool "Simtec Electronics ANUBIS" + select S3C24XX_DCLK + select PM_SIMTEC if PM + select HAVE_PATA_PLATFORM + select S3C24XX_GPIO_EXTRA64 + select S3C2440_XTAL_12000000 + select S3C_DEV_USB_HOST + help + Say Y here if you are using the Simtec Electronics ANUBIS + development system + +config MACH_AT2440EVB + bool "Avantech AT2440EVB development board" + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the AT2440EVB development board + +config MACH_MINI2440 + bool "MINI2440 development board" + select EEPROM_AT24 + select NEW_LEDS + select LEDS_CLASS + select LEDS_TRIGGER + select LEDS_TRIGGER_BACKLIGHT + select S3C_DEV_NAND + select S3C_DEV_USB_HOST + help + Say Y here to select support for the MINI2440. Is a 10cm x 10cm board + available via various sources. It can come with a 3.5" or 7" touch LCD. + +config MACH_NEXCODER_2440 + bool "NexVision NEXCODER 2440 Light Board" + select S3C2440_XTAL_12000000 + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board + +config MACH_OSIRIS + bool "Simtec IM2440D20 (OSIRIS) module" + select S3C24XX_DCLK + select PM_SIMTEC if PM + select S3C24XX_GPIO_EXTRA128 + select S3C2440_XTAL_12000000 + select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the Simtec IM2440D20 module, also + known as the Osiris. + +config MACH_OSIRIS_DVS + tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" + depends on MACH_OSIRIS + select TPS65010 + help + Say Y/M here if you want to have dynamic voltage scaling support + on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. + + The DVS driver alters the voltage supplied to the ARM core + depending on the frequency it is running at. The driver itself + does not do any of the frequency alteration, which is left up + to the cpufreq driver. + +config MACH_RX3715 + bool "HP iPAQ rx3715" + select S3C2440_XTAL_16934400 + select PM_H1940 if PM + select S3C_DEV_NAND + help + Say Y here if you are using the HP iPAQ rx3715. + +config ARCH_S3C2440 + bool "SMDK2440" + select S3C2440_XTAL_16934400 + select MACH_SMDK + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + help + Say Y here if you are using the SMDK2440. + +config SMDK2440_CPU2440 + bool "SMDK2440 with S3C2440 CPU module" + default y if ARCH_S3C2440 + select S3C2440_XTAL_16934400 + +endif # CPU_S3C2440 + +if CPU_S3C2442 + +comment "S3C2442 Boards" + +# +# The "S3C2442 Boards" list is ordered alphabetically by option text. +# (without ARCH_ or MACH_) +# + +config MACH_NEO1973_GTA02 + bool "Openmoko GTA02 / Freerunner phone" + select MFD_PCF50633 + select PCF50633_GPIO + select I2C + select POWER_SUPPLY + select MACH_NEO1973 + select S3C2410_PWM + select S3C_DEV_USB_HOST + help + Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone + +config MACH_RX1950 + bool "HP iPAQ rx1950" + select S3C24XX_DCLK + select PM_H1940 if PM + select I2C + select S3C2410_PWM + select S3C_DEV_NAND + select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2440_XTAL_16934400 + help + Say Y here if you're using HP iPAQ rx1950 + +config SMDK2440_CPU2442 + bool "SMDM2440 with S3C2442 CPU module" + +endif # CPU_S3C2440 + endmenu # SAMSUNG S3C24XX SoCs Support endif # ARCH_S3C24XX diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 789aa5ca4e0..f458cf2e1dd 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -26,6 +26,11 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2442) += s3c2442.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o +obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o + # # machine support # following is ordered alphabetically by option text. @@ -50,6 +55,17 @@ obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o +obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o +obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o +obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o +obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o +obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o +obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o +obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o + +obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o +obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o + # common bits of machine support obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o @@ -57,6 +73,7 @@ obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o # machine additions obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o +obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o # device setup diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c new file mode 100644 index 00000000000..bedbc87a342 --- /dev/null +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -0,0 +1,194 @@ +/* linux/arch/arm/mach-s3c2440/clock.c + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2440 Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include +#include + +/* S3C2440 extended clock support */ + +static unsigned long s3c2440_camif_upll_round(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + int div; + + if (rate > parent_rate) + return parent_rate; + + /* note, we remove the +/- 1 calculations for the divisor */ + + div = (parent_rate / rate) / 2; + + if (div < 1) + div = 1; + else if (div > 16) + div = 16; + + return parent_rate / (div * 2); +} + +static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); + + rate = s3c2440_camif_upll_round(clk, rate); + + camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK); + + if (rate != parent_rate) { + camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; + camdivn |= (((parent_rate / rate) / 2) - 1); + } + + __raw_writel(camdivn, S3C2440_CAMDIVN); + + return 0; +} + +/* Extra S3C2440 clocks */ + +static struct clk s3c2440_clk_cam = { + .name = "camif", + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2440_CLKCON_CAMERA, +}; + +static struct clk s3c2440_clk_cam_upll = { + .name = "camif-upll", + .ops = &(struct clk_ops) { + .set_rate = s3c2440_camif_upll_setrate, + .round_rate = s3c2440_camif_upll_round, + }, +}; + +static struct clk s3c2440_clk_ac97 = { + .name = "ac97", + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2440_CLKCON_CAMERA, +}; + +static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) +{ + unsigned long ucon0, ucon1, ucon2, divisor; + + /* the fun of calculating the uart divisors on the s3c2440 */ + ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); + ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); + ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); + + ucon0 &= S3C2440_UCON0_DIVMASK; + ucon1 &= S3C2440_UCON1_DIVMASK; + ucon2 &= S3C2440_UCON2_DIVMASK; + + if (ucon0 != 0) + divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6; + else if (ucon1 != 0) + divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21; + else if (ucon2 != 0) + divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36; + else + /* manual calims 44, seems to be 9 */ + divisor = 9; + + return clk_get_rate(clk->parent) / divisor; +} + +static struct clk s3c2440_clk_fclk_n = { + .name = "fclk_n", + .parent = &clk_f, + .ops = &(struct clk_ops) { + .get_rate = s3c2440_fclk_n_getrate, + }, +}; + +static struct clk_lookup s3c2440_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), +}; + +static int s3c2440_clk_add(struct device *dev) +{ + struct clk *clock_upll; + struct clk *clock_h; + struct clk *clock_p; + + clock_p = clk_get(NULL, "pclk"); + clock_h = clk_get(NULL, "hclk"); + clock_upll = clk_get(NULL, "upll"); + + if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { + printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); + return -EINVAL; + } + + s3c2440_clk_cam.parent = clock_h; + s3c2440_clk_ac97.parent = clock_p; + s3c2440_clk_cam_upll.parent = clock_upll; + s3c24xx_register_clock(&s3c2440_clk_fclk_n); + + s3c24xx_register_clock(&s3c2440_clk_ac97); + s3c24xx_register_clock(&s3c2440_clk_cam); + s3c24xx_register_clock(&s3c2440_clk_cam_upll); + clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup)); + + clk_disable(&s3c2440_clk_ac97); + clk_disable(&s3c2440_clk_cam); + + return 0; +} + +static struct subsys_interface s3c2440_clk_interface = { + .name = "s3c2440_clk", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_clk_add, +}; + +static __init int s3c24xx_clk_init(void) +{ + return subsys_interface_register(&s3c2440_clk_interface); +} + +arch_initcall(s3c24xx_clk_init); diff --git a/arch/arm/mach-s3c24xx/clock-s3c244x.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c new file mode 100644 index 00000000000..b3fdbdda3d5 --- /dev/null +++ b/arch/arm/mach-s3c24xx/clock-s3c244x.c @@ -0,0 +1,141 @@ +/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c + * + * Copyright (c) 2004-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2440/S3C2442 Common clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include + +static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) +{ + unsigned long camdivn; + unsigned long dvs; + + if (parent == &clk_f) + dvs = 0; + else if (parent == &clk_h) + dvs = S3C2440_CAMDIVN_DVSEN; + else + return -EINVAL; + + clk->parent = parent; + + camdivn = __raw_readl(S3C2440_CAMDIVN); + camdivn &= ~S3C2440_CAMDIVN_DVSEN; + camdivn |= dvs; + __raw_writel(camdivn, S3C2440_CAMDIVN); + + return 0; +} + +static struct clk clk_arm = { + .name = "armclk", + .id = -1, + .ops = &(struct clk_ops) { + .set_parent = s3c2440_setparent_armclk, + }, +}; + +static int s3c244x_clk_add(struct device *dev) +{ + unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); + unsigned long clkdivn; + struct clk *clock_upll; + int ret; + + printk("S3C244X: Clock Support, DVS %s\n", + (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); + + clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; + + ret = s3c24xx_register_clock(&clk_arm); + if (ret < 0) { + printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); + return ret; + } + + clock_upll = clk_get(NULL, "upll"); + if (IS_ERR(clock_upll)) { + printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); + return -ENOENT; + } + + /* check rate of UPLL, and if it is near 96MHz, then change + * to using half the UPLL rate for the system */ + + if (clk_get_rate(clock_upll) > (94 * MHZ)) { + clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; + + spin_lock(&clocks_lock); + + clkdivn = __raw_readl(S3C2410_CLKDIVN); + clkdivn |= S3C2440_CLKDIVN_UCLK; + __raw_writel(clkdivn, S3C2410_CLKDIVN); + + spin_unlock(&clocks_lock); + } + + return 0; +} + +static struct subsys_interface s3c2440_clk_interface = { + .name = "s3c2440_clk", + .subsys = &s3c2440_subsys, + .add_dev = s3c244x_clk_add, +}; + +static int s3c2440_clk_init(void) +{ + return subsys_interface_register(&s3c2440_clk_interface); +} + +arch_initcall(s3c2440_clk_init); + +static struct subsys_interface s3c2442_clk_interface = { + .name = "s3c2442_clk", + .subsys = &s3c2442_subsys, + .add_dev = s3c244x_clk_add, +}; + +static int s3c2442_clk_init(void) +{ + return subsys_interface_register(&s3c2442_clk_interface); +} + +arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index f65dc806296..62a2e196a68 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -12,6 +12,12 @@ #ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H #define __ARCH_ARM_MACH_S3C2410_COMMON_H +#ifdef CONFIG_CPU_S3C2410 void s3c2410_restart(char mode, const char *cmd); +#endif + +#ifdef CONFIG_CPU_S3C2440 +void s3c2440_restart(char mode, const char *cmd); +#endif #endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */ diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c new file mode 100644 index 00000000000..15b1ddf8f62 --- /dev/null +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c @@ -0,0 +1,196 @@ +/* linux/arch/arm/mach-s3c2440/dma.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * S3C2440 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, + }, + [DMACH_SDI] = { + .name = "sdi", + .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, + .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, + }, + [DMACH_PCM_IN] = { + .name = "pcm-in", + .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, + .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, + }, + [DMACH_PCM_OUT] = { + .name = "pcm-out", + .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, + .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, + }, + [DMACH_MIC_IN] = { + .name = "mic-in", + .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, + .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, + }, +}; + +static void s3c2440_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; +} + +static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = { + .select = s3c2440_dma_select, + .dcon_mask = 7 << 24, + .map = s3c2440_dma_mappings, + .map_size = ARRAY_SIZE(s3c2440_dma_mappings), +}; + +static struct s3c24xx_dma_order __initdata s3c2440_dma_order = { + .channels = { + [DMACH_SDI] = { + .list = { + [0] = 3 | DMA_CH_VALID, + [1] = 2 | DMA_CH_VALID, + [2] = 1 | DMA_CH_VALID, + [3] = 0 | DMA_CH_VALID, + }, + }, + [DMACH_I2S_IN] = { + .list = { + [0] = 1 | DMA_CH_VALID, + [1] = 2 | DMA_CH_VALID, + }, + }, + [DMACH_I2S_OUT] = { + .list = { + [0] = 2 | DMA_CH_VALID, + [1] = 1 | DMA_CH_VALID, + }, + }, + [DMACH_PCM_IN] = { + .list = { + [0] = 2 | DMA_CH_VALID, + [1] = 1 | DMA_CH_VALID, + }, + }, + [DMACH_PCM_OUT] = { + .list = { + [0] = 1 | DMA_CH_VALID, + [1] = 3 | DMA_CH_VALID, + }, + }, + [DMACH_MIC_IN] = { + .list = { + [0] = 3 | DMA_CH_VALID, + [1] = 2 | DMA_CH_VALID, + }, + }, + }, +}; + +static int __init s3c2440_dma_add(struct device *dev) +{ + s3c2410_dma_init(); + s3c24xx_dma_order_set(&s3c2440_dma_order); + return s3c24xx_dma_init_map(&s3c2440_dma_sel); +} + +static struct subsys_interface s3c2440_dma_interface = { + .name = "s3c2440_dma", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_dma_add, +}; + +static int __init s3c2440_dma_init(void) +{ + return subsys_interface_register(&s3c2440_dma_interface); +} + +arch_initcall(s3c2440_dma_init); + diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h new file mode 100644 index 00000000000..3a56a229cac --- /dev/null +++ b/arch/arm/mach-s3c24xx/include/mach/gta02.h @@ -0,0 +1,84 @@ +#ifndef _GTA02_H +#define _GTA02_H + +#include + +/* Different hardware revisions, passed in ATAG_REVISION by u-boot */ +#define GTA02v1_SYSTEM_REV 0x00000310 +#define GTA02v2_SYSTEM_REV 0x00000320 +#define GTA02v3_SYSTEM_REV 0x00000330 +#define GTA02v4_SYSTEM_REV 0x00000340 +#define GTA02v5_SYSTEM_REV 0x00000350 +/* since A7 is basically same as A6, we use A6 PCB ID */ +#define GTA02v6_SYSTEM_REV 0x00000360 + +#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */ + +#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0) +#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1) +#define GTA02_GPIO_AUX_LED S3C2410_GPB(2) +#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3) +#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5) +#define GTA02_GPIO_BT_EN S3C2410_GPB(6) +#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7) +#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8) +#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9) + +#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */ + +#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */ +#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */ +#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */ + +#define GTA02_GPIO_nG1_INT S3C2410_GPF(0) +#define GTA02_GPIO_IO1 S3C2410_GPF(1) +#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */ +#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4) +#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */ +#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6) +#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7) + +#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4) +#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */ +#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */ +#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */ +#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */ + +#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */ +#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2) +#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */ +#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */ +#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4) +#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5) +#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */ +#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7) +#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8) +#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8) +#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10) +#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */ +#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */ + +#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0 +#define GTA02_IRQ_MODEM IRQ_EINT1 +#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */ +#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4 +#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5 +#define GTA02_IRQ_AUX IRQ_EINT6 +#define GTA02_IRQ_nHOLD IRQ_EINT7 +#define GTA02_IRQ_PCF50633 IRQ_EINT9 +#define GTA02_IRQ_3D IRQ_EINT12 +#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */ +#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */ +#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */ +#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */ + +/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */ +#define GTA02_PCB_ID1_0 S3C2410_GPC(13) +#define GTA02_PCB_ID1_1 S3C2410_GPC(15) +#define GTA02_PCB_ID1_2 S3C2410_GPD(0) +#define GTA02_PCB_ID2_0 S3C2410_GPD(3) +#define GTA02_PCB_ID2_1 S3C2410_GPD(4) + +int gta02_get_pcb_revision(void); + +#endif /* _GTA02_H */ diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c new file mode 100644 index 00000000000..4fee9bc6bcb --- /dev/null +++ b/arch/arm/mach-s3c24xx/irq-s3c2440.c @@ -0,0 +1,128 @@ +/* linux/arch/arm/mach-s3c2440/irq.c + * + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include + +#include +#include +#include + +/* WDT/AC97 */ + +static void s3c_irq_demux_wdtac97(unsigned int irq, + struct irq_desc *desc) +{ + unsigned int subsrc, submsk; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= 13; + subsrc &= 3; + + if (subsrc != 0) { + if (subsrc & 1) { + generic_handle_irq(IRQ_S3C2440_WDT); + } + if (subsrc & 2) { + generic_handle_irq(IRQ_S3C2440_AC97); + } + } +} + + +#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) + +static void +s3c_irq_wdtac97_mask(struct irq_data *data) +{ + s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13); +} + +static void +s3c_irq_wdtac97_unmask(struct irq_data *data) +{ + s3c_irqsub_unmask(data->irq, INTMSK_WDT); +} + +static void +s3c_irq_wdtac97_ack(struct irq_data *data) +{ + s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13); +} + +static struct irq_chip s3c_irq_wdtac97 = { + .irq_mask = s3c_irq_wdtac97_mask, + .irq_unmask = s3c_irq_wdtac97_unmask, + .irq_ack = s3c_irq_wdtac97_ack, +}; + +static int s3c2440_irq_add(struct device *dev) +{ + unsigned int irqno; + + printk("S3C2440: IRQ Support\n"); + + /* add new chained handler for wdt, ac7 */ + + irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip, + handle_level_irq); + irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); + + for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { + irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97, + handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static struct subsys_interface s3c2440_irq_interface = { + .name = "s3c2440_irq", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_irq_add, +}; + +static int s3c2440_irq_init(void) +{ + return subsys_interface_register(&s3c2440_irq_interface); +} + +arch_initcall(s3c2440_irq_init); + diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c new file mode 100644 index 00000000000..74d3dcf46a4 --- /dev/null +++ b/arch/arm/mach-s3c24xx/irq-s3c244x.c @@ -0,0 +1,142 @@ +/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c + * + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include + +#include +#include +#include + +/* camera irq */ + +static void s3c_irq_demux_cam(unsigned int irq, + struct irq_desc *desc) +{ + unsigned int subsrc, submsk; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= 11; + subsrc &= 3; + + if (subsrc != 0) { + if (subsrc & 1) { + generic_handle_irq(IRQ_S3C2440_CAM_C); + } + if (subsrc & 2) { + generic_handle_irq(IRQ_S3C2440_CAM_P); + } + } +} + +#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) + +static void +s3c_irq_cam_mask(struct irq_data *data) +{ + s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11); +} + +static void +s3c_irq_cam_unmask(struct irq_data *data) +{ + s3c_irqsub_unmask(data->irq, INTMSK_CAM); +} + +static void +s3c_irq_cam_ack(struct irq_data *data) +{ + s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11); +} + +static struct irq_chip s3c_irq_cam = { + .irq_mask = s3c_irq_cam_mask, + .irq_unmask = s3c_irq_cam_unmask, + .irq_ack = s3c_irq_cam_ack, +}; + +static int s3c244x_irq_add(struct device *dev) +{ + unsigned int irqno; + + irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip, + handle_level_irq); + set_irq_flags(IRQ_NFCON, IRQF_VALID); + + /* add chained handler for camera */ + + irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip, + handle_level_irq); + irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam); + + for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { + irq_set_chip_and_handler(irqno, &s3c_irq_cam, + handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static struct subsys_interface s3c2440_irq_interface = { + .name = "s3c2440_irq", + .subsys = &s3c2440_subsys, + .add_dev = s3c244x_irq_add, +}; + +static int s3c2440_irq_init(void) +{ + return subsys_interface_register(&s3c2440_irq_interface); +} + +arch_initcall(s3c2440_irq_init); + +static struct subsys_interface s3c2442_irq_interface = { + .name = "s3c2442_irq", + .subsys = &s3c2442_subsys, + .add_dev = s3c244x_irq_add, +}; + + +static int s3c2442_irq_init(void) +{ + return subsys_interface_register(&s3c2442_irq_interface); +} + +arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c new file mode 100644 index 00000000000..24569550de1 --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -0,0 +1,491 @@ +/* linux/arch/arm/mach-s3c2440/mach-anubis.c + * + * Copyright 2003-2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include "common.h" + +#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics" + +static struct map_desc anubis_iodesc[] __initdata = { + /* ISA IO areas */ + + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(0x0), + .length = SZ_4M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(0x0), + .length = SZ_4M, + .type = MT_DEVICE, + }, + + /* we could possibly compress the next set down into a set of smaller tables + * pagetables, but that would mean using an L2 section, and it still means + * we cannot actually feed the same register to an LDR due to 16K spacing + */ + + /* CPLD control registers */ + + { + .virtual = (u32)ANUBIS_VA_CTRL1, + .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (u32)ANUBIS_VA_IDREG, + .pfn = __phys_to_pfn(ANUBIS_PA_IDREG), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, + }, + [1] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, + }, +}; + +/* NAND Flash on Anubis board */ + +static int external_map[] = { 2 }; +static int chip0_map[] = { 0 }; +static int chip1_map[] = { 1 }; + +static struct mtd_partition __initdata anubis_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_16K, + .offset = 0, + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_16K, + .offset = SZ_16K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct mtd_partition __initdata anubis_default_nand_part_large[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_128K, + .offset = 0, + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_128K, + .offset = SZ_128K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + +/* the Anubis has 3 selectable slots for nand-flash, the two + * on-board chip areas, as well as the external slot. + * + * Note, there is no current hot-plug support for the External + * socket. +*/ + +static struct s3c2410_nand_set __initdata anubis_nand_sets[] = { + [1] = { + .name = "External", + .nr_chips = 1, + .nr_map = external_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part, + }, + [0] = { + .name = "chip0", + .nr_chips = 1, + .nr_map = chip0_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part, + }, + [2] = { + .name = "chip1", + .nr_chips = 1, + .nr_map = chip1_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part, + }, +}; + +static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) +{ + unsigned int tmp; + + slot = set->nr_map[slot] & 3; + + pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n", + slot, set, set->nr_map); + + tmp = __raw_readb(ANUBIS_VA_CTRL1); + tmp &= ~ANUBIS_CTRL1_NANDSEL; + tmp |= slot; + + pr_debug("anubis_nand: ctrl1 now %02x\n", tmp); + + __raw_writeb(tmp, ANUBIS_VA_CTRL1); +} + +static struct s3c2410_platform_nand __initdata anubis_nand_info = { + .tacls = 25, + .twrph0 = 55, + .twrph1 = 40, + .nr_sets = ARRAY_SIZE(anubis_nand_sets), + .sets = anubis_nand_sets, + .select_chip = anubis_nand_select, +}; + +/* IDE channels */ + +static struct pata_platform_info anubis_ide_platdata = { + .ioport_shift = 5, +}; + +static struct resource anubis_ide0_resource[] = { + { + .start = S3C2410_CS3, + .end = S3C2410_CS3 + (8*32) - 1, + .flags = IORESOURCE_MEM, + }, { + .start = S3C2410_CS3 + (1<<26) + (6*32), + .end = S3C2410_CS3 + (1<<26) + (7*32) - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_IDE0, + .end = IRQ_IDE0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device anubis_device_ide0 = { + .name = "pata_platform", + .id = 0, + .num_resources = ARRAY_SIZE(anubis_ide0_resource), + .resource = anubis_ide0_resource, + .dev = { + .platform_data = &anubis_ide_platdata, + .coherent_dma_mask = ~0, + }, +}; + +static struct resource anubis_ide1_resource[] = { + { + .start = S3C2410_CS4, + .end = S3C2410_CS4 + (8*32) - 1, + .flags = IORESOURCE_MEM, + }, { + .start = S3C2410_CS4 + (1<<26) + (6*32), + .end = S3C2410_CS4 + (1<<26) + (7*32) - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_IDE0, + .end = IRQ_IDE0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device anubis_device_ide1 = { + .name = "pata_platform", + .id = 1, + .num_resources = ARRAY_SIZE(anubis_ide1_resource), + .resource = anubis_ide1_resource, + .dev = { + .platform_data = &anubis_ide_platdata, + .coherent_dma_mask = ~0, + }, +}; + +/* Asix AX88796 10/100 ethernet controller */ + +static struct ax_plat_data anubis_asix_platdata = { + .flags = AXFLG_MAC_FROMDEV, + .wordlength = 2, + .dcr_val = 0x48, + .rcr_val = 0x40, +}; + +static struct resource anubis_asix_resource[] = { + [0] = { + .start = S3C2410_CS5, + .end = S3C2410_CS5 + (0x20 * 0x20) -1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = IRQ_ASIX, + .end = IRQ_ASIX, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device anubis_device_asix = { + .name = "ax88796", + .id = 0, + .num_resources = ARRAY_SIZE(anubis_asix_resource), + .resource = anubis_asix_resource, + .dev = { + .platform_data = &anubis_asix_platdata, + } +}; + +/* SM501 */ + +static struct resource anubis_sm501_resource[] = { + [0] = { + .start = S3C2410_CS2, + .end = S3C2410_CS2 + SZ_8M, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S3C2410_CS2 + SZ_64M - SZ_2M, + .end = S3C2410_CS2 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_EINT0, + .end = IRQ_EINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sm501_initdata anubis_sm501_initdata = { + .gpio_high = { + .set = 0x3F000000, /* 24bit panel */ + .mask = 0x0, + }, + .misc_timing = { + .set = 0x010100, /* SDRAM timing */ + .mask = 0x1F1F00, + }, + .misc_control = { + .set = SM501_MISC_PNL_24BIT, + .mask = 0, + }, + + .devices = SM501_USE_GPIO, + + /* set the SDRAM and bus clocks */ + .mclk = 72 * MHZ, + .m1xclk = 144 * MHZ, +}; + +static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = { + [0] = { + .bus_num = 1, + .pin_scl = 44, + .pin_sda = 45, + }, + [1] = { + .bus_num = 2, + .pin_scl = 40, + .pin_sda = 41, + }, +}; + +static struct sm501_platdata anubis_sm501_platdata = { + .init = &anubis_sm501_initdata, + .gpio_base = -1, + .gpio_i2c = anubis_sm501_gpio_i2c, + .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c), +}; + +static struct platform_device anubis_device_sm501 = { + .name = "sm501", + .id = 0, + .num_resources = ARRAY_SIZE(anubis_sm501_resource), + .resource = anubis_sm501_resource, + .dev = { + .platform_data = &anubis_sm501_platdata, + }, +}; + +/* Standard Anubis devices */ + +static struct platform_device *anubis_devices[] __initdata = { + &s3c_device_ohci, + &s3c_device_wdt, + &s3c_device_adc, + &s3c_device_i2c0, + &s3c_device_rtc, + &s3c_device_nand, + &anubis_device_ide0, + &anubis_device_ide1, + &anubis_device_asix, + &anubis_device_sm501, +}; + +static struct clk *anubis_clocks[] __initdata = { + &s3c24xx_dclk0, + &s3c24xx_dclk1, + &s3c24xx_clkout0, + &s3c24xx_clkout1, + &s3c24xx_uclk, +}; + +/* I2C devices. */ + +static struct i2c_board_info anubis_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("tps65011", 0x48), + .irq = IRQ_EINT20, + } +}; + +/* Audio setup */ +static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { + .have_mic = 1, + .have_lout = 1, + .output_cdclk = 1, + .use_mpllin = 1, + .amp_gpio = S3C2410_GPB(2), + .amp_gain[0] = S3C2410_GPD(10), + .amp_gain[1] = S3C2410_GPD(11), +}; + +static void __init anubis_map_io(void) +{ + /* initialise the clocks */ + + s3c24xx_dclk0.parent = &clk_upll; + s3c24xx_dclk0.rate = 12*1000*1000; + + s3c24xx_dclk1.parent = &clk_upll; + s3c24xx_dclk1.rate = 24*1000*1000; + + s3c24xx_clkout0.parent = &s3c24xx_dclk0; + s3c24xx_clkout1.parent = &s3c24xx_dclk1; + + s3c24xx_uclk.parent = &s3c24xx_clkout1; + + s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks)); + + s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); + + /* check for the newer revision boards with large page nand */ + + if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) { + printk(KERN_INFO "ANUBIS-B detected (revision %d)\n", + __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK); + anubis_nand_sets[0].partitions = anubis_default_nand_part_large; + anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large); + } else { + /* ensure that the GPIO is setup */ + s3c2410_gpio_setpin(S3C2410_GPA(0), 1); + } +} + +static void __init anubis_init(void) +{ + s3c_i2c0_set_platdata(NULL); + s3c_nand_set_platdata(&anubis_nand_info); + simtec_audio_add(NULL, false, &anubis_audio); + + platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices)); + + i2c_register_board_info(0, anubis_i2c_devs, + ARRAY_SIZE(anubis_i2c_devs)); +} + + +MACHINE_START(ANUBIS, "Simtec-Anubis") + /* Maintainer: Ben Dooks */ + .atag_offset = 0x100, + .map_io = anubis_map_io, + .init_machine = anubis_init, + .init_irq = s3c24xx_init_irq, + .timer = &s3c24xx_timer, + .restart = s3c2440_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c new file mode 100644 index 00000000000..d6a9763110c --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -0,0 +1,226 @@ +/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c + * + * Copyright (c) 2008 Ramax Lo + * Based on mach-anubis.c by Ben Dooks + * and modifications by SBZ and + * Weibing + * + * For product information, visit http://www.arm.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "common.h" + +static struct map_desc at2440evb_iodesc[] __initdata = { + /* Nothing here */ +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, + }, +}; + +/* NAND Flash on AT2440EVB board */ + +static struct mtd_partition __initdata at2440evb_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_256K, + .offset = 0, + }, + [1] = { + .name = "Kernel", + .size = SZ_2M, + .offset = SZ_256K, + }, + [2] = { + .name = "Root", + .offset = SZ_256K + SZ_2M, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = { + [0] = { + .name = "nand", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part), + .partitions = at2440evb_default_nand_part, + }, +}; + +static struct s3c2410_platform_nand __initdata at2440evb_nand_info = { + .tacls = 25, + .twrph0 = 55, + .twrph1 = 40, + .nr_sets = ARRAY_SIZE(at2440evb_nand_sets), + .sets = at2440evb_nand_sets, +}; + +/* DM9000AEP 10/100 ethernet controller */ + +static struct resource at2440evb_dm9k_resource[] = { + [0] = { + .start = S3C2410_CS3, + .end = S3C2410_CS3 + 3, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = S3C2410_CS3 + 4, + .end = S3C2410_CS3 + 7, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = IRQ_EINT7, + .end = IRQ_EINT7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +static struct dm9000_plat_data at2440evb_dm9k_pdata = { + .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), +}; + +static struct platform_device at2440evb_device_eth = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource), + .resource = at2440evb_dm9k_resource, + .dev = { + .platform_data = &at2440evb_dm9k_pdata, + }, +}; + +static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = { + .gpio_detect = S3C2410_GPG(10), +}; + +/* 7" LCD panel */ + +static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = { + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + + .type = S3C2410_LCDCON1_TFT, + + .width = 800, + .height = 480, + + .pixclock = 33333, /* HCLK 60 MHz, divisor 2 */ + .xres = 800, + .yres = 480, + .bpp = 16, + .left_margin = 88, + .right_margin = 40, + .hsync_len = 128, + .upper_margin = 32, + .lower_margin = 11, + .vsync_len = 2, +}; + +static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = { + .displays = &at2440evb_lcd_cfg, + .num_displays = 1, + .default_display = 0, +}; + +static struct platform_device *at2440evb_devices[] __initdata = { + &s3c_device_ohci, + &s3c_device_wdt, + &s3c_device_adc, + &s3c_device_i2c0, + &s3c_device_rtc, + &s3c_device_nand, + &s3c_device_sdi, + &s3c_device_lcd, + &at2440evb_device_eth, +}; + +static void __init at2440evb_map_io(void) +{ + s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); + s3c24xx_init_clocks(16934400); + s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); +} + +static void __init at2440evb_init(void) +{ + s3c24xx_fb_set_platdata(&at2440evb_fb_info); + s3c24xx_mci_set_platdata(&at2440evb_mci_pdata); + s3c_nand_set_platdata(&at2440evb_nand_info); + s3c_i2c0_set_platdata(NULL); + + platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices)); +} + + +MACHINE_START(AT2440EVB, "AT2440EVB") + .atag_offset = 0x100, + .map_io = at2440evb_map_io, + .init_machine = at2440evb_init, + .init_irq = s3c24xx_init_irq, + .timer = &s3c24xx_timer, + .restart = s3c2440_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c new file mode 100644 index 00000000000..cf270f51d14 --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -0,0 +1,605 @@ +/* + * linux/arch/arm/mach-s3c2442/mach-gta02.c + * + * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner. + * + * Copyright (C) 2006-2009 by Openmoko, Inc. + * Authors: Harald Welte + * Andy Green + * Werner Almesberger + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "common.h" + +static struct pcf50633 *gta02_pcf; + +/* + * This gets called frequently when we paniced. + */ + +static long gta02_panic_blink(int state) +{ + long delay = 0; + char led; + + led = (state) ? 1 : 0; + gpio_direction_output(GTA02_GPIO_AUX_LED, led); + + return delay; +} + + +static struct map_desc gta02_iodesc[] __initdata = { + { + .virtual = 0xe0000000, + .pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000), + .length = SZ_1M, + .type = MT_DEVICE + }, +}; + +#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN) +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg gta02_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, +}; + +#ifdef CONFIG_CHARGER_PCF50633 +/* + * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin. + * We use this to recognize that we can pull 1A from the USB socket. + * + * These constants are the measured pcf50633 ADC levels with the 1A + * charger / 48K resistor, and with no pulldown resistor. + */ + +#define ADC_NOM_CHG_DETECT_1A 6 +#define ADC_NOM_CHG_DETECT_USB 43 + +static void +gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) +{ + int ma; + + /* Interpret charger type */ + if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) { + + /* + * Sanity - stop GPO driving out now that we have a 1A charger + * GPO controls USB Host power generation on GTA02 + */ + pcf50633_gpio_set(pcf, PCF50633_GPO, 0); + + ma = 1000; + } else + ma = 100; + + pcf50633_mbc_usb_curlim_set(pcf, ma); +} + +static struct delayed_work gta02_charger_work; +static int gta02_usb_vbus_draw; + +static void gta02_charger_worker(struct work_struct *work) +{ + if (gta02_usb_vbus_draw) { + pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw); + return; + } + +#ifdef CONFIG_PCF50633_ADC + pcf50633_adc_async_read(gta02_pcf, + PCF50633_ADCC1_MUX_ADCIN1, + PCF50633_ADCC1_AVERAGE_16, + gta02_configure_pmu_for_charger, + NULL); +#else + /* + * If the PCF50633 ADC is disabled we fallback to a + * 100mA limit for safety. + */ + pcf50633_mbc_usb_curlim_set(pcf, 100); +#endif +} + +#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000) + +static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq) +{ + if (irq == PCF50633_IRQ_USBINS) { + schedule_delayed_work(>a02_charger_work, + GTA02_CHARGER_CONFIGURE_TIMEOUT); + + return; + } + + if (irq == PCF50633_IRQ_USBREM) { + cancel_delayed_work_sync(>a02_charger_work); + gta02_usb_vbus_draw = 0; + } +} + +static void gta02_udc_vbus_draw(unsigned int ma) +{ + if (!gta02_pcf) + return; + + gta02_usb_vbus_draw = ma; + + schedule_delayed_work(>a02_charger_work, + GTA02_CHARGER_CONFIGURE_TIMEOUT); +} +#else /* !CONFIG_CHARGER_PCF50633 */ +#define gta02_pmu_event_callback NULL +#define gta02_udc_vbus_draw NULL +#endif + +/* + * This is called when pc50633 is probed, unfortunately quite late in the + * day since it is an I2C bus device. Here we can belatedly define some + * platform devices with the advantage that we can mark the pcf50633 as the + * parent. This makes them get suspended and resumed with their parent + * the pcf50633 still around. + */ + +static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf); + + +static char *gta02_batteries[] = { + "battery", +}; + +static struct pcf50633_bl_platform_data gta02_backlight_data = { + .default_brightness = 0x3f, + .default_brightness_limit = 0, + .ramp_time = 5, +}; + +struct pcf50633_platform_data gta02_pcf_pdata = { + .resumers = { + [0] = PCF50633_INT1_USBINS | + PCF50633_INT1_USBREM | + PCF50633_INT1_ALARM, + [1] = PCF50633_INT2_ONKEYF, + [2] = PCF50633_INT3_ONKEY1S, + [3] = PCF50633_INT4_LOWSYS | + PCF50633_INT4_LOWBAT | + PCF50633_INT4_HIGHTMP, + }, + + .batteries = gta02_batteries, + .num_batteries = ARRAY_SIZE(gta02_batteries), + + .charger_reference_current_ma = 1000, + + .backlight_data = >a02_backlight_data, + + .reg_init_data = { + [PCF50633_REGULATOR_AUTO] = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .always_on = 1, + .apply_uV = 1, + }, + }, + [PCF50633_REGULATOR_DOWN1] = { + .constraints = { + .min_uV = 1300000, + .max_uV = 1600000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .always_on = 1, + .apply_uV = 1, + }, + }, + [PCF50633_REGULATOR_DOWN2] = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + .always_on = 1, + }, + }, + [PCF50633_REGULATOR_HCLDO] = { + .constraints = { + .min_uV = 2000000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + }, + [PCF50633_REGULATOR_LDO1] = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + }, + }, + [PCF50633_REGULATOR_LDO2] = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + }, + }, + [PCF50633_REGULATOR_LDO3] = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + }, + }, + [PCF50633_REGULATOR_LDO4] = { + .constraints = { + .min_uV = 3200000, + .max_uV = 3200000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + }, + }, + [PCF50633_REGULATOR_LDO5] = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + }, + }, + [PCF50633_REGULATOR_LDO6] = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + }, + }, + [PCF50633_REGULATOR_MEMLDO] = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + }, + }, + + }, + .probe_done = gta02_pmu_attach_child_devices, + .mbc_event_callback = gta02_pmu_event_callback, +}; + + +/* NOR Flash. */ + +#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */ +#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */ + +static struct physmap_flash_data gta02_nor_flash_data = { + .width = 2, +}; + +static struct resource gta02_nor_flash_resource = { + .start = GTA02_FLASH_BASE, + .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device gta02_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = >a02_nor_flash_data, + }, + .resource = >a02_nor_flash_resource, + .num_resources = 1, +}; + + +struct platform_device s3c24xx_pwm_device = { + .name = "s3c24xx_pwm", + .num_resources = 0, +}; + +static struct platform_device gta02_dfbmcs320_device = { + .name = "dfbmcs320", +}; + +static struct i2c_board_info gta02_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("pcf50633", 0x73), + .irq = GTA02_IRQ_PCF50633, + .platform_data = >a02_pcf_pdata, + }, + { + I2C_BOARD_INFO("wm8753", 0x1a), + }, +}; + +static struct s3c2410_nand_set __initdata gta02_nand_sets[] = { + [0] = { + /* + * This name is also hard-coded in the boot loaders, so + * changing it would would require all users to upgrade + * their boot loaders, some of which are stored in a NOR + * that is considered to be immutable. + */ + .name = "neo1973-nand", + .nr_chips = 1, + .flash_bbt = 1, + }, +}; + +/* + * Choose a set of timings derived from S3C@2442B MCP54 + * data sheet (K5D2G13ACM-D075 MCP Memory). + */ + +static struct s3c2410_platform_nand __initdata gta02_nand_info = { + .tacls = 0, + .twrph0 = 25, + .twrph1 = 15, + .nr_sets = ARRAY_SIZE(gta02_nand_sets), + .sets = gta02_nand_sets, +}; + + +/* Get PMU to set USB current limit accordingly. */ +static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = { + .vbus_draw = gta02_udc_vbus_draw, + .pullup_pin = GTA02_GPIO_USB_PULLUP, +}; + +/* USB */ +static struct s3c2410_hcd_info gta02_usb_info __initdata = { + .port[0] = { + .flags = S3C_HCDFLG_USED, + }, + .port[1] = { + .flags = 0, + }, +}; + +/* Touchscreen */ +static struct s3c2410_ts_mach_info gta02_ts_info = { + .delay = 10000, + .presc = 0xff, /* slow as we can go */ + .oversampling_shift = 2, +}; + +/* Buttons */ +static struct gpio_keys_button gta02_buttons[] = { + { + .gpio = GTA02_GPIO_AUX_KEY, + .code = KEY_PHONE, + .desc = "Aux", + .type = EV_KEY, + .debounce_interval = 100, + }, + { + .gpio = GTA02_GPIO_HOLD_KEY, + .code = KEY_PAUSE, + .desc = "Hold", + .type = EV_KEY, + .debounce_interval = 100, + }, +}; + +static struct gpio_keys_platform_data gta02_buttons_pdata = { + .buttons = gta02_buttons, + .nbuttons = ARRAY_SIZE(gta02_buttons), +}; + +static struct platform_device gta02_buttons_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = >a02_buttons_pdata, + }, +}; + +static void __init gta02_map_io(void) +{ + s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); +} + + +/* These are the guys that don't need to be children of PMU. */ + +static struct platform_device *gta02_devices[] __initdata = { + &s3c_device_ohci, + &s3c_device_wdt, + &s3c_device_sdi, + &s3c_device_usbgadget, + &s3c_device_nand, + >a02_nor_flash, + &s3c24xx_pwm_device, + &s3c_device_iis, + &samsung_asoc_dma, + &s3c_device_i2c0, + >a02_dfbmcs320_device, + >a02_buttons_device, + &s3c_device_adc, + &s3c_device_ts, +}; + +/* These guys DO need to be children of PMU. */ + +static struct platform_device *gta02_devices_pmu_children[] = { +}; + + +/* + * This is called when pc50633 is probed, quite late in the day since it is an + * I2C bus device. Here we can define platform devices with the advantage that + * we can mark the pcf50633 as the parent. This makes them get suspended and + * resumed with their parent the pcf50633 still around. All devices whose + * operation depends on something from pcf50633 must have this relationship + * made explicit like this, or suspend and resume will become an unreliable + * hellworld. + */ + +static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf) +{ + int n; + + /* Grab a copy of the now probed PMU pointer. */ + gta02_pcf = pcf; + + for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++) + gta02_devices_pmu_children[n]->dev.parent = pcf->dev; + + platform_add_devices(gta02_devices_pmu_children, + ARRAY_SIZE(gta02_devices_pmu_children)); +} + +static void gta02_poweroff(void) +{ + pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1); +} + +static void __init gta02_machine_init(void) +{ + /* Set the panic callback to turn AUX LED on or off. */ + panic_blink = gta02_panic_blink; + + s3c_pm_init(); + +#ifdef CONFIG_CHARGER_PCF50633 + INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker); +#endif + + s3c24xx_udc_set_platdata(>a02_udc_cfg); + s3c24xx_ts_set_platdata(>a02_ts_info); + s3c_ohci_set_platdata(>a02_usb_info); + s3c_nand_set_platdata(>a02_nand_info); + s3c_i2c0_set_platdata(NULL); + + i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs)); + + platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); + pm_power_off = gta02_poweroff; + + regulator_has_full_constraints(); +} + + +MACHINE_START(NEO1973_GTA02, "GTA02") + /* Maintainer: Nelson Castillo */ + .atag_offset = 0x100, + .map_io = gta02_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = gta02_machine_init, + .timer = &s3c24xx_timer, + .restart = s3c2440_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c new file mode 100644 index 00000000000..adbbb85bc4c --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -0,0 +1,705 @@ +/* linux/arch/arm/mach-s3c2440/mach-mini2440.c + * + * Copyright (c) 2008 Ramax Lo + * Based on mach-anubis.c by Ben Dooks + * and modifications by SBZ and + * Weibing and + * Michel Pollet + * + * For product information, visit http://code.google.com/p/mini2440/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "common.h" + +#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300) + +static struct map_desc mini2440_iodesc[] __initdata = { + /* nothing to declare, move along */ +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + + +static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, +}; + +/* USB device UDC support */ + +static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { + .pullup_pin = S3C2410_GPC(5), +}; + + +/* LCD timing and setup */ + +/* + * This macro simplifies the table bellow + */ +#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \ + _yres,margin_top,margin_bottom,vsync, refresh) \ + .width = _xres, \ + .xres = _xres, \ + .height = _yres, \ + .yres = _yres, \ + .left_margin = margin_left, \ + .right_margin = margin_right, \ + .upper_margin = margin_top, \ + .lower_margin = margin_bottom, \ + .hsync_len = hsync, \ + .vsync_len = vsync, \ + .pixclock = ((_clock*100000000000LL) / \ + ((refresh) * \ + (hsync + margin_left + _xres + margin_right) * \ + (vsync + margin_top + _yres + margin_bottom))), \ + .bpp = 16,\ + .type = (S3C2410_LCDCON1_TFT16BPP |\ + S3C2410_LCDCON1_TFT) + +static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { + [0] = { /* mini2440 + 3.5" TFT + touchscreen */ + _LCD_DECLARE( + 7, /* The 3.5 is quite fast */ + 240, 21, 38, 6, /* x timing */ + 320, 4, 4, 2, /* y timing */ + 60), /* refresh rate */ + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_INVVDEN | + S3C2410_LCDCON5_PWREN), + }, + [1] = { /* mini2440 + 7" TFT + touchscreen */ + _LCD_DECLARE( + 10, /* the 7" runs slower */ + 800, 40, 40, 48, /* x timing */ + 480, 29, 3, 3, /* y timing */ + 50), /* refresh rate */ + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN), + }, + /* The VGA shield can outout at several resolutions. All share + * the same timings, however, anything smaller than 1024x768 + * will only be displayed in the top left corner of a 1024x768 + * XGA output unless you add optional dip switches to the shield. + * Therefore timings for other resolutions have been omitted here. + */ + [2] = { + _LCD_DECLARE( + 10, + 1024, 1, 2, 2, /* y timing */ + 768, 200, 16, 16, /* x timing */ + 24), /* refresh rate, maximum stable, + tested with the FPGA shield */ + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_HWSWP), + }, + /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/ + [3] = { + _LCD_DECLARE( + /* clock */ + 7, + /* xres, margin_right, margin_left, hsync */ + 320, 68, 66, 4, + /* yres, margin_top, margin_bottom, vsync */ + 240, 4, 4, 9, + /* refresh rate */ + 60), + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVDEN | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVCLK | + S3C2410_LCDCON5_HWSWP), + }, +}; + +/* todo - put into gpio header */ + +#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) +#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) + +static struct s3c2410fb_mach_info mini2440_fb_info __initdata = { + .displays = &mini2440_lcd_cfg[0], /* not constant! see init */ + .num_displays = 1, + .default_display = 0, + + /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN + * and disable the pull down resistors on pins we are using for LCD + * data. */ + + .gpcup = (0xf << 1) | (0x3f << 10), + + .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE | + S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM | + S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 | + S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 | + S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7), + + .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) | + S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) | + S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) | + S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) | + S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)), + + .gpdup = (0x3f << 2) | (0x3f << 10), + + .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 | + S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 | + S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 | + S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 | + S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 | + S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23), + + .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) | + S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) | + S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) | + S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)| + S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)| + S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)), +}; + +/* MMC/SD */ + +static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = { + .gpio_detect = S3C2410_GPG(8), + .gpio_wprotect = S3C2410_GPH(8), + .set_power = NULL, + .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34, +}; + +/* NAND Flash on MINI2440 board */ + +static struct mtd_partition mini2440_default_nand_part[] __initdata = { + [0] = { + .name = "u-boot", + .size = SZ_256K, + .offset = 0, + }, + [1] = { + .name = "u-boot-env", + .size = SZ_128K, + .offset = SZ_256K, + }, + [2] = { + .name = "kernel", + /* 5 megabytes, for a kernel with no modules + * or a uImage with a ramdisk attached */ + .size = 0x00500000, + .offset = SZ_256K + SZ_128K, + }, + [3] = { + .name = "root", + .offset = SZ_256K + SZ_128K + 0x00500000, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = { + [0] = { + .name = "nand", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part), + .partitions = mini2440_default_nand_part, + .flash_bbt = 1, /* we use u-boot to create a BBT */ + }, +}; + +static struct s3c2410_platform_nand mini2440_nand_info __initdata = { + .tacls = 0, + .twrph0 = 25, + .twrph1 = 15, + .nr_sets = ARRAY_SIZE(mini2440_nand_sets), + .sets = mini2440_nand_sets, + .ignore_unset_ecc = 1, +}; + +/* DM9000AEP 10/100 ethernet controller */ + +static struct resource mini2440_dm9k_resource[] = { + [0] = { + .start = MACH_MINI2440_DM9K_BASE, + .end = MACH_MINI2440_DM9K_BASE + 3, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MACH_MINI2440_DM9K_BASE + 4, + .end = MACH_MINI2440_DM9K_BASE + 7, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = IRQ_EINT7, + .end = IRQ_EINT7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +/* + * The DM9000 has no eeprom, and it's MAC address is set by + * the bootloader before starting the kernel. + */ +static struct dm9000_plat_data mini2440_dm9k_pdata = { + .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), +}; + +static struct platform_device mini2440_device_eth = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(mini2440_dm9k_resource), + .resource = mini2440_dm9k_resource, + .dev = { + .platform_data = &mini2440_dm9k_pdata, + }, +}; + +/* CON5 + * +--+ /-----\ + * | | | | + * | | | BAT | + * | | \_____/ + * | | + * | | +----+ +----+ + * | | | K5 | | K1 | + * | | +----+ +----+ + * | | +----+ +----+ + * | | | K4 | | K2 | + * | | +----+ +----+ + * | | +----+ +----+ + * | | | K6 | | K3 | + * | | +----+ +----+ + * ..... + */ +static struct gpio_keys_button mini2440_buttons[] = { + { + .gpio = S3C2410_GPG(0), /* K1 */ + .code = KEY_F1, + .desc = "Button 1", + .active_low = 1, + }, + { + .gpio = S3C2410_GPG(3), /* K2 */ + .code = KEY_F2, + .desc = "Button 2", + .active_low = 1, + }, + { + .gpio = S3C2410_GPG(5), /* K3 */ + .code = KEY_F3, + .desc = "Button 3", + .active_low = 1, + }, + { + .gpio = S3C2410_GPG(6), /* K4 */ + .code = KEY_POWER, + .desc = "Power", + .active_low = 1, + }, + { + .gpio = S3C2410_GPG(7), /* K5 */ + .code = KEY_F5, + .desc = "Button 5", + .active_low = 1, + }, +#if 0 + /* this pin is also known as TCLK1 and seems to already + * marked as "in use" somehow in the kernel -- possibly wrongly */ + { + .gpio = S3C2410_GPG(11), /* K6 */ + .code = KEY_F6, + .desc = "Button 6", + .active_low = 1, + }, +#endif +}; + +static struct gpio_keys_platform_data mini2440_button_data = { + .buttons = mini2440_buttons, + .nbuttons = ARRAY_SIZE(mini2440_buttons), +}; + +static struct platform_device mini2440_button_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &mini2440_button_data, + } +}; + +/* LEDS */ + +static struct s3c24xx_led_platdata mini2440_led1_pdata = { + .name = "led1", + .gpio = S3C2410_GPB(5), + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, + .def_trigger = "heartbeat", +}; + +static struct s3c24xx_led_platdata mini2440_led2_pdata = { + .name = "led2", + .gpio = S3C2410_GPB(6), + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, + .def_trigger = "nand-disk", +}; + +static struct s3c24xx_led_platdata mini2440_led3_pdata = { + .name = "led3", + .gpio = S3C2410_GPB(7), + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, + .def_trigger = "mmc0", +}; + +static struct s3c24xx_led_platdata mini2440_led4_pdata = { + .name = "led4", + .gpio = S3C2410_GPB(8), + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, + .def_trigger = "", +}; + +static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = { + .name = "backlight", + .gpio = S3C2410_GPG(4), + .def_trigger = "backlight", +}; + +static struct platform_device mini2440_led1 = { + .name = "s3c24xx_led", + .id = 1, + .dev = { + .platform_data = &mini2440_led1_pdata, + }, +}; + +static struct platform_device mini2440_led2 = { + .name = "s3c24xx_led", + .id = 2, + .dev = { + .platform_data = &mini2440_led2_pdata, + }, +}; + +static struct platform_device mini2440_led3 = { + .name = "s3c24xx_led", + .id = 3, + .dev = { + .platform_data = &mini2440_led3_pdata, + }, +}; + +static struct platform_device mini2440_led4 = { + .name = "s3c24xx_led", + .id = 4, + .dev = { + .platform_data = &mini2440_led4_pdata, + }, +}; + +static struct platform_device mini2440_led_backlight = { + .name = "s3c24xx_led", + .id = 5, + .dev = { + .platform_data = &mini2440_led_backlight_pdata, + }, +}; + +/* AUDIO */ + +static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = { + .l3_clk = S3C2410_GPB(4), + .l3_mode = S3C2410_GPB(2), + .l3_data = S3C2410_GPB(3), + .model = UDA134X_UDA1341 +}; + +static struct platform_device mini2440_audio = { + .name = "s3c24xx_uda134x", + .id = 0, + .dev = { + .platform_data = &mini2440_audio_pins, + }, +}; + +/* + * I2C devices + */ +static struct at24_platform_data at24c08 = { + .byte_len = SZ_8K / 8, + .page_size = 16, +}; + +static struct i2c_board_info mini2440_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("24c08", 0x50), + .platform_data = &at24c08, + }, +}; + +static struct platform_device uda1340_codec = { + .name = "uda134x-codec", + .id = -1, +}; + +static struct platform_device *mini2440_devices[] __initdata = { + &s3c_device_ohci, + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_rtc, + &s3c_device_usbgadget, + &mini2440_device_eth, + &mini2440_led1, + &mini2440_led2, + &mini2440_led3, + &mini2440_led4, + &mini2440_button_device, + &s3c_device_nand, + &s3c_device_sdi, + &s3c_device_iis, + &uda1340_codec, + &mini2440_audio, + &samsung_asoc_dma, +}; + +static void __init mini2440_map_io(void) +{ + s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); +} + +/* + * mini2440_features string + * + * t = Touchscreen present + * b = backlight control + * c = camera [TODO] + * 0-9 LCD configuration + * + */ +static char mini2440_features_str[12] __initdata = "0tb"; + +static int __init mini2440_features_setup(char *str) +{ + if (str) + strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str)); + return 1; +} + +__setup("mini2440=", mini2440_features_setup); + +#define FEATURE_SCREEN (1 << 0) +#define FEATURE_BACKLIGHT (1 << 1) +#define FEATURE_TOUCH (1 << 2) +#define FEATURE_CAMERA (1 << 3) + +struct mini2440_features_t { + int count; + int done; + int lcd_index; + struct platform_device *optional[8]; +}; + +static void __init mini2440_parse_features( + struct mini2440_features_t * features, + const char * features_str ) +{ + const char * fp = features_str; + + features->count = 0; + features->done = 0; + features->lcd_index = -1; + + while (*fp) { + char f = *fp++; + + switch (f) { + case '0'...'9': /* tft screen */ + if (features->done & FEATURE_SCREEN) { + printk(KERN_INFO "MINI2440: '%c' ignored, " + "screen type already set\n", f); + } else { + int li = f - '0'; + if (li >= ARRAY_SIZE(mini2440_lcd_cfg)) + printk(KERN_INFO "MINI2440: " + "'%c' out of range LCD mode\n", f); + else { + features->optional[features->count++] = + &s3c_device_lcd; + features->lcd_index = li; + } + } + features->done |= FEATURE_SCREEN; + break; + case 'b': + if (features->done & FEATURE_BACKLIGHT) + printk(KERN_INFO "MINI2440: '%c' ignored, " + "backlight already set\n", f); + else { + features->optional[features->count++] = + &mini2440_led_backlight; + } + features->done |= FEATURE_BACKLIGHT; + break; + case 't': + printk(KERN_INFO "MINI2440: '%c' ignored, " + "touchscreen not compiled in\n", f); + break; + case 'c': + if (features->done & FEATURE_CAMERA) + printk(KERN_INFO "MINI2440: '%c' ignored, " + "camera already registered\n", f); + else + features->optional[features->count++] = + &s3c_device_camif; + features->done |= FEATURE_CAMERA; + break; + } + } +} + +static void __init mini2440_init(void) +{ + struct mini2440_features_t features = { 0 }; + int i; + + printk(KERN_INFO "MINI2440: Option string mini2440=%s\n", + mini2440_features_str); + + /* Parse the feature string */ + mini2440_parse_features(&features, mini2440_features_str); + + /* turn LCD on */ + s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); + + /* Turn the backlight early on */ + WARN_ON(gpio_request(S3C2410_GPG(4), "backlight")); + gpio_direction_output(S3C2410_GPG(4), 1); + + /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ + s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); + s3c2410_gpio_setpin(S3C2410_GPB(1), 0); + s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); + + /* mark the key as input, without pullups (there is one on the board) */ + for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { + s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT); + } + if (features.lcd_index != -1) { + int li; + + mini2440_fb_info.displays = + &mini2440_lcd_cfg[features.lcd_index]; + + printk(KERN_INFO "MINI2440: LCD"); + for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++) + if (li == features.lcd_index) + printk(" [%d:%dx%d]", li, + mini2440_lcd_cfg[li].width, + mini2440_lcd_cfg[li].height); + else + printk(" %d:%dx%d", li, + mini2440_lcd_cfg[li].width, + mini2440_lcd_cfg[li].height); + printk("\n"); + s3c24xx_fb_set_platdata(&mini2440_fb_info); + } + + s3c24xx_udc_set_platdata(&mini2440_udc_cfg); + s3c24xx_mci_set_platdata(&mini2440_mmc_cfg); + s3c_nand_set_platdata(&mini2440_nand_info); + s3c_i2c0_set_platdata(NULL); + + i2c_register_board_info(0, mini2440_i2c_devs, + ARRAY_SIZE(mini2440_i2c_devs)); + + platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices)); + + if (features.count) /* the optional features */ + platform_add_devices(features.optional, features.count); + +} + + +MACHINE_START(MINI2440, "MINI2440") + /* Maintainer: Michel Pollet */ + .atag_offset = 0x100, + .map_io = mini2440_map_io, + .init_machine = mini2440_init, + .init_irq = s3c24xx_init_irq, + .timer = &s3c24xx_timer, + .restart = s3c2440_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c new file mode 100644 index 00000000000..40eaf844bc1 --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -0,0 +1,162 @@ +/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c + * + * Copyright (c) 2004 Nex Vision + * Guillaume GOURAT + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 15-10-2004 GG Created initial version + * 12-03-2005 BJD Updated for release + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include +#include +#include +#include + +//#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "common.h" + +static struct map_desc nexcoder_iodesc[] __initdata = { + /* nothing here yet */ +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + +/* NOR Flash on NexVision NexCoder 2440 board */ + +static struct resource nexcoder_nor_resource[] = { + [0] = { + .start = S3C2410_CS0, + .end = S3C2410_CS0 + (8*1024*1024) - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct map_info nexcoder_nor_map = { + .bankwidth = 2, +}; + +static struct platform_device nexcoder_device_nor = { + .name = "mtd-flash", + .id = -1, + .num_resources = ARRAY_SIZE(nexcoder_nor_resource), + .resource = nexcoder_nor_resource, + .dev = + { + .platform_data = &nexcoder_nor_map, + } +}; + +/* Standard Nexcoder devices */ + +static struct platform_device *nexcoder_devices[] __initdata = { + &s3c_device_ohci, + &s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_rtc, + &s3c_device_camif, + &s3c_device_spi0, + &s3c_device_spi1, + &nexcoder_device_nor, +}; + +static void __init nexcoder_sensorboard_init(void) +{ + // Initialize SCCB bus + s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL + s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA + s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT); + + // Power up the sensor board + s3c2410_gpio_setpin(S3C2410_GPF(1), 1); + s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN + s3c2410_gpio_setpin(S3C2410_GPF(2), 0); + s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN +} + +static void __init nexcoder_map_io(void) +{ + s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); + + nexcoder_sensorboard_init(); +} + +static void __init nexcoder_init(void) +{ + s3c_i2c0_set_platdata(NULL); + platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices)); +}; + +MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") + /* Maintainer: Guillaume GOURAT */ + .atag_offset = 0x100, + .map_io = nexcoder_map_io, + .init_machine = nexcoder_init, + .init_irq = s3c24xx_init_irq, + .timer = &s3c24xx_timer, + .restart = s3c2440_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c new file mode 100644 index 00000000000..ad2792dfbee --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c @@ -0,0 +1,194 @@ +/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c + * + * Copyright (c) 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * Simtec Osiris Dynamic Voltage Scaling support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include + +#include + +#include + +#define OSIRIS_GPIO_DVS S3C2410_GPB(5) + +static bool dvs_en; + +static void osiris_dvs_tps_setdvs(bool on) +{ + unsigned vregs1 = 0, vdcdc2 = 0; + + if (!on) { + vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF; + vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */ + } + + dvs_en = on; + vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V; + vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE; + + tps65010_config_vregs1(vregs1); + tps65010_config_vdcdc2(vdcdc2); +} + +static bool is_dvs(struct s3c_freq *f) +{ + /* at the moment, we assume ARMCLK = HCLK => DVS */ + return f->armclk == f->hclk; +} + +/* keep track of current state */ +static bool cur_dvs = false; + +static int osiris_dvs_notify(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *cf = data; + struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf); + bool old_dvs = is_dvs(&freqs->old); + bool new_dvs = is_dvs(&freqs->new); + int ret = 0; + + if (!dvs_en) + return 0; + + printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__, + freqs->old.armclk, freqs->old.hclk, + freqs->new.armclk, freqs->new.hclk); + + switch (val) { + case CPUFREQ_PRECHANGE: + if (old_dvs & !new_dvs || + cur_dvs & !new_dvs) { + pr_debug("%s: exiting dvs\n", __func__); + cur_dvs = false; + gpio_set_value(OSIRIS_GPIO_DVS, 1); + } + break; + case CPUFREQ_POSTCHANGE: + if (!old_dvs & new_dvs || + !cur_dvs & new_dvs) { + pr_debug("entering dvs\n"); + cur_dvs = true; + gpio_set_value(OSIRIS_GPIO_DVS, 0); + } + break; + } + + return ret; +} + +static struct notifier_block osiris_dvs_nb = { + .notifier_call = osiris_dvs_notify, +}; + +static int __devinit osiris_dvs_probe(struct platform_device *pdev) +{ + int ret; + + dev_info(&pdev->dev, "initialising\n"); + + ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs"); + if (ret) { + dev_err(&pdev->dev, "cannot claim gpio\n"); + goto err_nogpio; + } + + /* start with dvs disabled */ + gpio_direction_output(OSIRIS_GPIO_DVS, 1); + + ret = cpufreq_register_notifier(&osiris_dvs_nb, + CPUFREQ_TRANSITION_NOTIFIER); + if (ret) { + dev_err(&pdev->dev, "failed to register with cpufreq\n"); + goto err_nofreq; + } + + osiris_dvs_tps_setdvs(true); + + return 0; + +err_nofreq: + gpio_free(OSIRIS_GPIO_DVS); + +err_nogpio: + return ret; +} + +static int __devexit osiris_dvs_remove(struct platform_device *pdev) +{ + dev_info(&pdev->dev, "exiting\n"); + + /* disable any current dvs */ + gpio_set_value(OSIRIS_GPIO_DVS, 1); + osiris_dvs_tps_setdvs(false); + + cpufreq_unregister_notifier(&osiris_dvs_nb, + CPUFREQ_TRANSITION_NOTIFIER); + + gpio_free(OSIRIS_GPIO_DVS); + + return 0; +} + +/* the CONFIG_PM block is so small, it isn't worth actaully compiling it + * out if the configuration isn't set. */ + +static int osiris_dvs_suspend(struct device *dev) +{ + gpio_set_value(OSIRIS_GPIO_DVS, 1); + osiris_dvs_tps_setdvs(false); + cur_dvs = false; + + return 0; +} + +static int osiris_dvs_resume(struct device *dev) +{ + osiris_dvs_tps_setdvs(true); + return 0; +} + +static const struct dev_pm_ops osiris_dvs_pm = { + .suspend = osiris_dvs_suspend, + .resume = osiris_dvs_resume, +}; + +static struct platform_driver osiris_dvs_driver = { + .probe = osiris_dvs_probe, + .remove = __devexit_p(osiris_dvs_remove), + .driver = { + .name = "osiris-dvs", + .owner = THIS_MODULE, + .pm = &osiris_dvs_pm, + }, +}; + +static int __init osiris_dvs_init(void) +{ + return platform_driver_register(&osiris_dvs_driver); +} + +static void __exit osiris_dvs_exit(void) +{ + platform_driver_unregister(&osiris_dvs_driver); +} + +module_init(osiris_dvs_init); +module_exit(osiris_dvs_exit); + +MODULE_DESCRIPTION("Simtec OSIRIS DVS support"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:osiris-dvs"); diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c new file mode 100644 index 00000000000..4c480ef734f --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -0,0 +1,440 @@ +/* linux/arch/arm/mach-s3c2440/mach-osiris.c + * + * Copyright (c) 2005-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "common.h" + +/* onboard perihperal map */ + +static struct map_desc osiris_iodesc[] __initdata = { + /* ISA IO areas (may be over-written later) */ + + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS5), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS5), + .length = SZ_16M, + .type = MT_DEVICE, + }, + + /* CPLD control registers */ + + { + .virtual = (u32)OSIRIS_VA_CTRL0, + .pfn = __phys_to_pfn(OSIRIS_PA_CTRL0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (u32)OSIRIS_VA_CTRL1, + .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (u32)OSIRIS_VA_CTRL2, + .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (u32)OSIRIS_VA_IDREG, + .pfn = __phys_to_pfn(OSIRIS_PA_IDREG), + .length = SZ_16K, + .type = MT_DEVICE, + }, +}; + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, + } +}; + +/* NAND Flash on Osiris board */ + +static int external_map[] = { 2 }; +static int chip0_map[] = { 0 }; +static int chip1_map[] = { 1 }; + +static struct mtd_partition __initdata osiris_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_16K, + .offset = 0, + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_16K, + .offset = SZ_16K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct mtd_partition __initdata osiris_default_nand_part_large[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_128K, + .offset = 0, + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_128K, + .offset = SZ_128K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + +/* the Osiris has 3 selectable slots for nand-flash, the two + * on-board chip areas, as well as the external slot. + * + * Note, there is no current hot-plug support for the External + * socket. +*/ + +static struct s3c2410_nand_set __initdata osiris_nand_sets[] = { + [1] = { + .name = "External", + .nr_chips = 1, + .nr_map = external_map, + .options = NAND_SCAN_SILENT_NODEV, + .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), + .partitions = osiris_default_nand_part, + }, + [0] = { + .name = "chip0", + .nr_chips = 1, + .nr_map = chip0_map, + .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), + .partitions = osiris_default_nand_part, + }, + [2] = { + .name = "chip1", + .nr_chips = 1, + .nr_map = chip1_map, + .options = NAND_SCAN_SILENT_NODEV, + .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), + .partitions = osiris_default_nand_part, + }, +}; + +static void osiris_nand_select(struct s3c2410_nand_set *set, int slot) +{ + unsigned int tmp; + + slot = set->nr_map[slot] & 3; + + pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n", + slot, set, set->nr_map); + + tmp = __raw_readb(OSIRIS_VA_CTRL0); + tmp &= ~OSIRIS_CTRL0_NANDSEL; + tmp |= slot; + + pr_debug("osiris_nand: ctrl0 now %02x\n", tmp); + + __raw_writeb(tmp, OSIRIS_VA_CTRL0); +} + +static struct s3c2410_platform_nand __initdata osiris_nand_info = { + .tacls = 25, + .twrph0 = 60, + .twrph1 = 60, + .nr_sets = ARRAY_SIZE(osiris_nand_sets), + .sets = osiris_nand_sets, + .select_chip = osiris_nand_select, +}; + +/* PCMCIA control and configuration */ + +static struct resource osiris_pcmcia_resource[] = { + [0] = { + .start = 0x0f000000, + .end = 0x0f100000, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x0c000000, + .end = 0x0c100000, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device osiris_pcmcia = { + .name = "osiris-pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(osiris_pcmcia_resource), + .resource = osiris_pcmcia_resource, +}; + +/* Osiris power management device */ + +#ifdef CONFIG_PM +static unsigned char pm_osiris_ctrl0; + +static int osiris_pm_suspend(void) +{ + unsigned int tmp; + + pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0); + tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL; + + /* ensure correct NAND slot is selected on resume */ + if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0) + tmp |= 2; + + __raw_writeb(tmp, OSIRIS_VA_CTRL0); + + /* ensure that an nRESET is not generated on resume. */ + s3c2410_gpio_setpin(S3C2410_GPA(21), 1); + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); + + return 0; +} + +static void osiris_pm_resume(void) +{ + if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8) + __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1); + + __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0); + + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); +} + +#else +#define osiris_pm_suspend NULL +#define osiris_pm_resume NULL +#endif + +static struct syscore_ops osiris_pm_syscore_ops = { + .suspend = osiris_pm_suspend, + .resume = osiris_pm_resume, +}; + +/* Link for DVS driver to TPS65011 */ + +static void osiris_tps_release(struct device *dev) +{ + /* static device, do not need to release anything */ +} + +static struct platform_device osiris_tps_device = { + .name = "osiris-dvs", + .id = -1, + .dev.release = osiris_tps_release, +}; + +static int osiris_tps_setup(struct i2c_client *client, void *context) +{ + osiris_tps_device.dev.parent = &client->dev; + return platform_device_register(&osiris_tps_device); +} + +static int osiris_tps_remove(struct i2c_client *client, void *context) +{ + platform_device_unregister(&osiris_tps_device); + return 0; +} + +static struct tps65010_board osiris_tps_board = { + .base = -1, /* GPIO can go anywhere at the moment */ + .setup = osiris_tps_setup, + .teardown = osiris_tps_remove, +}; + +/* I2C devices fitted. */ + +static struct i2c_board_info osiris_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("tps65011", 0x48), + .irq = IRQ_EINT20, + .platform_data = &osiris_tps_board, + }, +}; + +/* Standard Osiris devices */ + +static struct platform_device *osiris_devices[] __initdata = { + &s3c_device_i2c0, + &s3c_device_wdt, + &s3c_device_nand, + &osiris_pcmcia, +}; + +static struct clk *osiris_clocks[] __initdata = { + &s3c24xx_dclk0, + &s3c24xx_dclk1, + &s3c24xx_clkout0, + &s3c24xx_clkout1, + &s3c24xx_uclk, +}; + +static struct s3c_cpufreq_board __initdata osiris_cpufreq = { + .refresh = 7800, /* refresh period is 7.8usec */ + .auto_io = 1, + .need_io = 1, +}; + +static void __init osiris_map_io(void) +{ + unsigned long flags; + + /* initialise the clocks */ + + s3c24xx_dclk0.parent = &clk_upll; + s3c24xx_dclk0.rate = 12*1000*1000; + + s3c24xx_dclk1.parent = &clk_upll; + s3c24xx_dclk1.rate = 24*1000*1000; + + s3c24xx_clkout0.parent = &s3c24xx_dclk0; + s3c24xx_clkout1.parent = &s3c24xx_dclk1; + + s3c24xx_uclk.parent = &s3c24xx_clkout1; + + s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks)); + + s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); + + /* check for the newer revision boards with large page nand */ + + if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) { + printk(KERN_INFO "OSIRIS-B detected (revision %d)\n", + __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK); + osiris_nand_sets[0].partitions = osiris_default_nand_part_large; + osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large); + } else { + /* write-protect line to the NAND */ + s3c2410_gpio_setpin(S3C2410_GPA(0), 1); + } + + /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */ + + local_irq_save(flags); + __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON); + local_irq_restore(flags); +} + +static void __init osiris_init(void) +{ + register_syscore_ops(&osiris_pm_syscore_ops); + + s3c_i2c0_set_platdata(NULL); + s3c_nand_set_platdata(&osiris_nand_info); + + s3c_cpufreq_setboard(&osiris_cpufreq); + + i2c_register_board_info(0, osiris_i2c_devs, + ARRAY_SIZE(osiris_i2c_devs)); + + platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices)); +}; + +MACHINE_START(OSIRIS, "Simtec-OSIRIS") + /* Maintainer: Ben Dooks */ + .atag_offset = 0x100, + .map_io = osiris_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = osiris_init, + .timer = &s3c24xx_timer, + .restart = s3c2440_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c new file mode 100644 index 00000000000..80077f6472e --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -0,0 +1,826 @@ +/* linux/arch/arm/mach-s3c2440/mach-rx1950.c + * + * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev, + * Copyright (c) 2007-2010 Vasily Khoruzhick + * + * based on smdk2440 written by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "common.h" + +#define LCD_PWM_PERIOD 192960 +#define LCD_PWM_DUTY 127353 + +static struct map_desc rx1950_iodesc[] __initdata = { +}; + +static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + .clk_sel = S3C2410_UCON_CLKSEL3, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + .clk_sel = S3C2410_UCON_CLKSEL3, + }, + /* IR port */ + [2] = { + .hwport = 2, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x43, + .ufcon = 0xf1, + .clk_sel = S3C2410_UCON_CLKSEL3, + }, +}; + +static struct s3c2410fb_display rx1950_display = { + .type = S3C2410_LCDCON1_TFT, + .width = 240, + .height = 320, + .xres = 240, + .yres = 320, + .bpp = 16, + + .pixclock = 260000, + .left_margin = 10, + .right_margin = 20, + .hsync_len = 10, + .upper_margin = 2, + .lower_margin = 2, + .vsync_len = 2, + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVCLK | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_HWSWP | + (0x02 << 13) | + (0x02 << 15), + +}; + +static int power_supply_init(struct device *dev) +{ + return gpio_request(S3C2410_GPF(2), "cable plugged"); +} + +static int rx1950_is_ac_online(void) +{ + return !gpio_get_value(S3C2410_GPF(2)); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(S3C2410_GPF(2)); +} + +static char *rx1950_supplicants[] = { + "main-battery" +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = rx1950_is_ac_online, + .exit = power_supply_exit, + .supplied_to = rx1950_supplicants, + .num_supplicants = ARRAY_SIZE(rx1950_supplicants), +}; + +static struct resource power_supply_resources[] = { + [0] = { + .name = "ac", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | + IORESOURCE_IRQ_HIGHEDGE, + .start = IRQ_EINT2, + .end = IRQ_EINT2, + }, +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = + &power_supply_info, + }, + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), +}; + +static const struct s3c_adc_bat_thresh bat_lut_noac[] = { + { .volt = 4100, .cur = 156, .level = 100}, + { .volt = 4050, .cur = 156, .level = 95}, + { .volt = 4025, .cur = 141, .level = 90}, + { .volt = 3995, .cur = 144, .level = 85}, + { .volt = 3957, .cur = 162, .level = 80}, + { .volt = 3931, .cur = 147, .level = 75}, + { .volt = 3902, .cur = 147, .level = 70}, + { .volt = 3863, .cur = 153, .level = 65}, + { .volt = 3838, .cur = 150, .level = 60}, + { .volt = 3800, .cur = 153, .level = 55}, + { .volt = 3765, .cur = 153, .level = 50}, + { .volt = 3748, .cur = 172, .level = 45}, + { .volt = 3740, .cur = 153, .level = 40}, + { .volt = 3714, .cur = 175, .level = 35}, + { .volt = 3710, .cur = 156, .level = 30}, + { .volt = 3963, .cur = 156, .level = 25}, + { .volt = 3672, .cur = 178, .level = 20}, + { .volt = 3651, .cur = 178, .level = 15}, + { .volt = 3629, .cur = 178, .level = 10}, + { .volt = 3612, .cur = 162, .level = 5}, + { .volt = 3605, .cur = 162, .level = 0}, +}; + +static const struct s3c_adc_bat_thresh bat_lut_acin[] = { + { .volt = 4200, .cur = 0, .level = 100}, + { .volt = 4190, .cur = 0, .level = 99}, + { .volt = 4178, .cur = 0, .level = 95}, + { .volt = 4110, .cur = 0, .level = 70}, + { .volt = 4076, .cur = 0, .level = 65}, + { .volt = 4046, .cur = 0, .level = 60}, + { .volt = 4021, .cur = 0, .level = 55}, + { .volt = 3999, .cur = 0, .level = 50}, + { .volt = 3982, .cur = 0, .level = 45}, + { .volt = 3965, .cur = 0, .level = 40}, + { .volt = 3957, .cur = 0, .level = 35}, + { .volt = 3948, .cur = 0, .level = 30}, + { .volt = 3936, .cur = 0, .level = 25}, + { .volt = 3927, .cur = 0, .level = 20}, + { .volt = 3906, .cur = 0, .level = 15}, + { .volt = 3880, .cur = 0, .level = 10}, + { .volt = 3829, .cur = 0, .level = 5}, + { .volt = 3820, .cur = 0, .level = 0}, +}; + +int rx1950_bat_init(void) +{ + int ret; + + ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1"); + if (ret) + goto err_gpio1; + ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2"); + if (ret) + goto err_gpio2; + + return 0; + +err_gpio2: + gpio_free(S3C2410_GPJ(2)); +err_gpio1: + return ret; +} + +void rx1950_bat_exit(void) +{ + gpio_free(S3C2410_GPJ(2)); + gpio_free(S3C2410_GPJ(3)); +} + +void rx1950_enable_charger(void) +{ + gpio_direction_output(S3C2410_GPJ(2), 1); + gpio_direction_output(S3C2410_GPJ(3), 1); +} + +void rx1950_disable_charger(void) +{ + gpio_direction_output(S3C2410_GPJ(2), 0); + gpio_direction_output(S3C2410_GPJ(3), 0); +} + +DEFINE_SPINLOCK(rx1950_blink_spin); + +static int rx1950_led_blink_set(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off) +{ + int blink_gpio, check_gpio; + + switch (gpio) { + case S3C2410_GPA(6): + blink_gpio = S3C2410_GPA(4); + check_gpio = S3C2410_GPA(3); + break; + case S3C2410_GPA(7): + blink_gpio = S3C2410_GPA(3); + check_gpio = S3C2410_GPA(4); + break; + default: + return -EINVAL; + break; + } + + if (delay_on && delay_off && !*delay_on && !*delay_off) + *delay_on = *delay_off = 500; + + spin_lock(&rx1950_blink_spin); + + switch (state) { + case GPIO_LED_NO_BLINK_LOW: + case GPIO_LED_NO_BLINK_HIGH: + if (!gpio_get_value(check_gpio)) + gpio_set_value(S3C2410_GPJ(6), 0); + gpio_set_value(blink_gpio, 0); + gpio_set_value(gpio, state); + break; + case GPIO_LED_BLINK: + gpio_set_value(gpio, 0); + gpio_set_value(S3C2410_GPJ(6), 1); + gpio_set_value(blink_gpio, 1); + break; + } + + spin_unlock(&rx1950_blink_spin); + + return 0; +} + +static struct gpio_led rx1950_leds_desc[] = { + { + .name = "Green", + .default_trigger = "main-battery-full", + .gpio = S3C2410_GPA(6), + .retain_state_suspended = 1, + }, + { + .name = "Red", + .default_trigger + = "main-battery-charging-blink-full-solid", + .gpio = S3C2410_GPA(7), + .retain_state_suspended = 1, + }, + { + .name = "Blue", + .default_trigger = "rx1950-acx-mem", + .gpio = S3C2410_GPA(11), + .retain_state_suspended = 1, + }, +}; + +static struct gpio_led_platform_data rx1950_leds_pdata = { + .num_leds = ARRAY_SIZE(rx1950_leds_desc), + .leds = rx1950_leds_desc, + .gpio_blink_set = rx1950_led_blink_set, +}; + +static struct platform_device rx1950_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &rx1950_leds_pdata, + }, +}; + +static struct s3c_adc_bat_pdata rx1950_bat_cfg = { + .init = rx1950_bat_init, + .exit = rx1950_bat_exit, + .enable_charger = rx1950_enable_charger, + .disable_charger = rx1950_disable_charger, + .gpio_charge_finished = S3C2410_GPF(3), + .lut_noac = bat_lut_noac, + .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac), + .lut_acin = bat_lut_acin, + .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin), + .volt_channel = 0, + .current_channel = 1, + .volt_mult = 4235, + .current_mult = 2900, + .internal_impedance = 200, +}; + +static struct platform_device rx1950_battery = { + .name = "s3c-adc-battery", + .id = -1, + .dev = { + .parent = &s3c_device_adc.dev, + .platform_data = &rx1950_bat_cfg, + }, +}; + +static struct s3c2410fb_mach_info rx1950_lcd_cfg = { + .displays = &rx1950_display, + .num_displays = 1, + .default_display = 0, + + .lpcsel = 0x02, + .gpccon = 0xaa9556a9, + .gpccon_mask = 0xffc003fc, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + + .gpdcon = 0xaa90aaa1, + .gpdcon_mask = 0xffc0fff0, + .gpdup = 0x0000fcfd, + .gpdup_mask = 0xffffffff, + +}; + +static struct pwm_device *lcd_pwm; + +void rx1950_lcd_power(int enable) +{ + int i; + static int enabled; + if (enabled == enable) + return; + if (!enable) { + + /* GPC11-GPC15->OUTPUT */ + for (i = 11; i < 16; i++) + gpio_direction_output(S3C2410_GPC(i), 1); + + /* Wait a bit here... */ + mdelay(100); + + /* GPD2-GPD7->OUTPUT */ + /* GPD11-GPD15->OUTPUT */ + /* GPD2-GPD7->1, GPD11-GPD15->1 */ + for (i = 2; i < 8; i++) + gpio_direction_output(S3C2410_GPD(i), 1); + for (i = 11; i < 16; i++) + gpio_direction_output(S3C2410_GPD(i), 1); + + /* Wait a bit here...*/ + mdelay(100); + + /* GPB0->OUTPUT, GPB0->0 */ + gpio_direction_output(S3C2410_GPB(0), 0); + + /* GPC1-GPC4->OUTPUT, GPC1-4->0 */ + for (i = 1; i < 5; i++) + gpio_direction_output(S3C2410_GPC(i), 0); + + /* GPC15-GPC11->0 */ + for (i = 11; i < 16; i++) + gpio_direction_output(S3C2410_GPC(i), 0); + + /* GPD15-GPD11->0, GPD2->GPD7->0 */ + for (i = 11; i < 16; i++) + gpio_direction_output(S3C2410_GPD(i), 0); + + for (i = 2; i < 8; i++) + gpio_direction_output(S3C2410_GPD(i), 0); + + /* GPC6->0, GPC7->0, GPC5->0 */ + gpio_direction_output(S3C2410_GPC(6), 0); + gpio_direction_output(S3C2410_GPC(7), 0); + gpio_direction_output(S3C2410_GPC(5), 0); + + /* GPB1->OUTPUT, GPB1->0 */ + gpio_direction_output(S3C2410_GPB(1), 0); + pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD); + pwm_disable(lcd_pwm); + + /* GPC0->0, GPC10->0 */ + gpio_direction_output(S3C2410_GPC(0), 0); + gpio_direction_output(S3C2410_GPC(10), 0); + } else { + pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD); + pwm_enable(lcd_pwm); + + gpio_direction_output(S3C2410_GPC(0), 1); + gpio_direction_output(S3C2410_GPC(5), 1); + + s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1); + gpio_direction_output(S3C2410_GPC(7), 1); + + for (i = 1; i < 5; i++) + s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2)); + + for (i = 11; i < 16; i++) + s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2)); + + for (i = 2; i < 8; i++) + s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2)); + + for (i = 11; i < 16; i++) + s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2)); + + gpio_direction_output(S3C2410_GPC(10), 1); + gpio_direction_output(S3C2410_GPC(6), 1); + } + enabled = enable; +} + +static void rx1950_bl_power(int enable) +{ + static int enabled; + if (enabled == enable) + return; + if (!enable) { + gpio_direction_output(S3C2410_GPB(0), 0); + } else { + /* LED driver need a "push" to power on */ + gpio_direction_output(S3C2410_GPB(0), 1); + /* Warm up backlight for one period of PWM. + * Without this trick its almost impossible to + * enable backlight with low brightness value + */ + ndelay(48000); + s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); + } + enabled = enable; +} + +static int rx1950_backlight_init(struct device *dev) +{ + WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight")); + lcd_pwm = pwm_request(1, "RX1950 LCD"); + if (IS_ERR(lcd_pwm)) { + dev_err(dev, "Unable to request PWM for LCD power!\n"); + return PTR_ERR(lcd_pwm); + } + + rx1950_lcd_power(1); + rx1950_bl_power(1); + + return 0; +} + +static void rx1950_backlight_exit(struct device *dev) +{ + rx1950_bl_power(0); + rx1950_lcd_power(0); + + pwm_free(lcd_pwm); + gpio_free(S3C2410_GPB(0)); +} + + +static int rx1950_backlight_notify(struct device *dev, int brightness) +{ + if (!brightness) { + rx1950_bl_power(0); + rx1950_lcd_power(0); + } else { + rx1950_lcd_power(1); + rx1950_bl_power(1); + } + return brightness; +} + +static struct platform_pwm_backlight_data rx1950_backlight_data = { + .pwm_id = 0, + .max_brightness = 24, + .dft_brightness = 4, + .pwm_period_ns = 48000, + .init = rx1950_backlight_init, + .notify = rx1950_backlight_notify, + .exit = rx1950_backlight_exit, +}; + +static struct platform_device rx1950_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[0].dev, + .platform_data = &rx1950_backlight_data, + }, +}; + +static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd) +{ + switch (power_mode) { + case MMC_POWER_OFF: + gpio_direction_output(S3C2410_GPJ(1), 0); + break; + case MMC_POWER_UP: + case MMC_POWER_ON: + gpio_direction_output(S3C2410_GPJ(1), 1); + break; + default: + break; + } +} + +static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = { + .gpio_detect = S3C2410_GPF(5), + .gpio_wprotect = S3C2410_GPH(8), + .set_power = rx1950_set_mmc_power, + .ocr_avail = MMC_VDD_32_33, +}; + +static struct mtd_partition rx1950_nand_part[] = { + [0] = { + .name = "Boot0", + .offset = 0, + .size = 0x4000, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = "Boot1", + .offset = MTDPART_OFS_APPEND, + .size = 0x40000, + .mask_flags = MTD_WRITEABLE, + }, + [2] = { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 0x300000, + .mask_flags = 0, + }, + [3] = { + .name = "Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + }, +}; + +static struct s3c2410_nand_set rx1950_nand_sets[] = { + [0] = { + .name = "Internal", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(rx1950_nand_part), + .partitions = rx1950_nand_part, + }, +}; + +static struct s3c2410_platform_nand rx1950_nand_info = { + .tacls = 25, + .twrph0 = 50, + .twrph1 = 15, + .nr_sets = ARRAY_SIZE(rx1950_nand_sets), + .sets = rx1950_nand_sets, +}; + +static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = { + .vbus_pin = S3C2410_GPG(5), + .vbus_pin_inverted = 1, + .pullup_pin = S3C2410_GPJ(5), +}; + +static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 3, +}; + +static struct gpio_keys_button rx1950_gpio_keys_table[] = { + { + .code = KEY_POWER, + .gpio = S3C2410_GPF(0), + .active_low = 1, + .desc = "Power button", + .wakeup = 1, + }, + { + .code = KEY_F5, + .gpio = S3C2410_GPF(7), + .active_low = 1, + .desc = "Record button", + }, + { + .code = KEY_F1, + .gpio = S3C2410_GPG(0), + .active_low = 1, + .desc = "Calendar button", + }, + { + .code = KEY_F2, + .gpio = S3C2410_GPG(2), + .active_low = 1, + .desc = "Contacts button", + }, + { + .code = KEY_F3, + .gpio = S3C2410_GPG(3), + .active_low = 1, + .desc = "Mail button", + }, + { + .code = KEY_F4, + .gpio = S3C2410_GPG(7), + .active_low = 1, + .desc = "WLAN button", + }, + { + .code = KEY_LEFT, + .gpio = S3C2410_GPG(10), + .active_low = 1, + .desc = "Left button", + }, + { + .code = KEY_RIGHT, + .gpio = S3C2410_GPG(11), + .active_low = 1, + .desc = "Right button", + }, + { + .code = KEY_UP, + .gpio = S3C2410_GPG(4), + .active_low = 1, + .desc = "Up button", + }, + { + .code = KEY_DOWN, + .gpio = S3C2410_GPG(6), + .active_low = 1, + .desc = "Down button", + }, + { + .code = KEY_ENTER, + .gpio = S3C2410_GPG(9), + .active_low = 1, + .desc = "Ok button" + }, +}; + +static struct gpio_keys_platform_data rx1950_gpio_keys_data = { + .buttons = rx1950_gpio_keys_table, + .nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table), +}; + +static struct platform_device rx1950_device_gpiokeys = { + .name = "gpio-keys", + .dev.platform_data = &rx1950_gpio_keys_data, +}; + +static struct uda1380_platform_data uda1380_info = { + .gpio_power = S3C2410_GPJ(0), + .gpio_reset = S3C2410_GPD(0), + .dac_clk = UDA1380_DAC_CLK_SYSCLK, +}; + +static struct i2c_board_info rx1950_i2c_devices[] = { + { + I2C_BOARD_INFO("uda1380", 0x1a), + .platform_data = &uda1380_info, + }, +}; + +static struct platform_device *rx1950_devices[] __initdata = { + &s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_iis, + &samsung_asoc_dma, + &s3c_device_usbgadget, + &s3c_device_rtc, + &s3c_device_nand, + &s3c_device_sdi, + &s3c_device_adc, + &s3c_device_ts, + &s3c_device_timer[0], + &s3c_device_timer[1], + &rx1950_backlight, + &rx1950_device_gpiokeys, + &power_supply, + &rx1950_battery, + &rx1950_leds, +}; + +static struct clk *rx1950_clocks[] __initdata = { + &s3c24xx_clkout0, + &s3c24xx_clkout1, +}; + +static void __init rx1950_map_io(void) +{ + s3c24xx_clkout0.parent = &clk_h; + s3c24xx_clkout1.parent = &clk_f; + + s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks)); + + s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); + s3c24xx_init_clocks(16934000); + s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); + + /* setup PM */ + +#ifdef CONFIG_PM_H1940 + memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8); +#endif + + s3c_pm_init(); +} + +static void __init rx1950_init_machine(void) +{ + int i; + + s3c24xx_fb_set_platdata(&rx1950_lcd_cfg); + s3c24xx_udc_set_platdata(&rx1950_udc_cfg); + s3c24xx_ts_set_platdata(&rx1950_ts_cfg); + s3c24xx_mci_set_platdata(&rx1950_mmc_cfg); + s3c_i2c0_set_platdata(NULL); + s3c_nand_set_platdata(&rx1950_nand_info); + + /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ + s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, 0x0); + + /* mmc power is disabled by default */ + WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power")); + gpio_direction_output(S3C2410_GPJ(1), 0); + + for (i = 0; i < 8; i++) + WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power")); + + for (i = 10; i < 16; i++) + WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power")); + + for (i = 2; i < 8; i++) + WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power")); + + for (i = 11; i < 16; i++) + WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power")); + + WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power")); + + WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink")); + WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink")); + WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink")); + gpio_direction_output(S3C2410_GPA(3), 0); + gpio_direction_output(S3C2410_GPA(4), 0); + gpio_direction_output(S3C2410_GPJ(6), 0); + + platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); + + i2c_register_board_info(0, rx1950_i2c_devices, + ARRAY_SIZE(rx1950_i2c_devices)); +} + +/* H1940 and RX3715 need to reserve this for suspend */ +static void __init rx1950_reserve(void) +{ + memblock_reserve(0x30003000, 0x1000); + memblock_reserve(0x30081000, 0x1000); +} + +MACHINE_START(RX1950, "HP iPAQ RX1950") + /* Maintainers: Vasily Khoruzhick */ + .atag_offset = 0x100, + .map_io = rx1950_map_io, + .reserve = rx1950_reserve, + .init_irq = s3c24xx_init_irq, + .init_machine = rx1950_init_machine, + .timer = &s3c24xx_timer, + .restart = s3c2440_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c new file mode 100644 index 00000000000..20103bafbd4 --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -0,0 +1,217 @@ +/* linux/arch/arm/mach-s3c2440/mach-rx3715.c + * + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks + * + * http://www.handhelds.org/projects/rx3715.html + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include "common.h" + +static struct map_desc rx3715_iodesc[] __initdata = { + /* dump ISA space somewhere unused */ + + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE, + }, +}; + +static struct s3c2410_uartcfg rx3715_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + .clk_sel = S3C2410_UCON_CLKSEL3, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x00, + .clk_sel = S3C2410_UCON_CLKSEL3, + }, + /* IR port */ + [2] = { + .hwport = 2, + .uart_flags = UPF_CONS_FLOW, + .ucon = 0x3c5, + .ulcon = 0x43, + .ufcon = 0x51, + .clk_sel = S3C2410_UCON_CLKSEL3, + } +}; + +/* framebuffer lcd controller information */ + +static struct s3c2410fb_display rx3715_lcdcfg __initdata = { + .lcdcon5 = S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_HWSWP, + + .type = S3C2410_LCDCON1_TFT, + .width = 240, + .height = 320, + + .pixclock = 260000, + .xres = 240, + .yres = 320, + .bpp = 16, + .left_margin = 36, + .right_margin = 36, + .hsync_len = 8, + .upper_margin = 6, + .lower_margin = 7, + .vsync_len = 3, +}; + +static struct s3c2410fb_mach_info rx3715_fb_info __initdata = { + + .displays = &rx3715_lcdcfg, + .num_displays = 1, + .default_display = 0, + + .lpcsel = 0xf82, + + .gpccon = 0xaa955699, + .gpccon_mask = 0xffc003cc, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + + .gpdcon = 0xaa95aaa1, + .gpdcon_mask = 0xffc0fff0, + .gpdup = 0x0000faff, + .gpdup_mask = 0xffffffff, +}; + +static struct mtd_partition __initdata rx3715_nand_part[] = { + [0] = { + .name = "Whole Flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = { + [0] = { + .name = "Internal", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(rx3715_nand_part), + .partitions = rx3715_nand_part, + }, +}; + +static struct s3c2410_platform_nand __initdata rx3715_nand_info = { + .tacls = 25, + .twrph0 = 50, + .twrph1 = 15, + .nr_sets = ARRAY_SIZE(rx3715_nand_sets), + .sets = rx3715_nand_sets, +}; + +static struct platform_device *rx3715_devices[] __initdata = { + &s3c_device_ohci, + &s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_nand, +}; + +static void __init rx3715_map_io(void) +{ + s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); + s3c24xx_init_clocks(16934000); + s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); +} + +/* H1940 and RX3715 need to reserve this for suspend */ +static void __init rx3715_reserve(void) +{ + memblock_reserve(0x30003000, 0x1000); + memblock_reserve(0x30081000, 0x1000); +} + +static void __init rx3715_init_irq(void) +{ + s3c24xx_init_irq(); +} + +static void __init rx3715_init_machine(void) +{ +#ifdef CONFIG_PM_H1940 + memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); +#endif + s3c_pm_init(); + + s3c_nand_set_platdata(&rx3715_nand_info); + s3c24xx_fb_set_platdata(&rx3715_fb_info); + platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices)); +} + +MACHINE_START(RX3715, "IPAQ-RX3715") + /* Maintainer: Ben Dooks */ + .atag_offset = 0x100, + .map_io = rx3715_map_io, + .reserve = rx3715_reserve, + .init_irq = rx3715_init_irq, + .init_machine = rx3715_init_machine, + .timer = &s3c24xx_timer, + .restart = s3c2440_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c new file mode 100644 index 00000000000..1deb60d12a6 --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -0,0 +1,187 @@ +/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks + * + * http://www.fluff.org/ben/smdk2440/ + * + * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +#include "common.h" + +static struct map_desc smdk2440_iodesc[] __initdata = { + /* ISA IO Space map (memory space selected by A24) */ + + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + } +}; + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + /* IR port */ + [2] = { + .hwport = 2, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x43, + .ufcon = 0x51, + } +}; + +/* LCD driver info */ + +static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = { + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + + .type = S3C2410_LCDCON1_TFT, + + .width = 240, + .height = 320, + + .pixclock = 166667, /* HCLK 60 MHz, divisor 10 */ + .xres = 240, + .yres = 320, + .bpp = 16, + .left_margin = 20, + .right_margin = 8, + .hsync_len = 4, + .upper_margin = 8, + .lower_margin = 7, + .vsync_len = 4, +}; + +static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = { + .displays = &smdk2440_lcd_cfg, + .num_displays = 1, + .default_display = 0, + +#if 0 + /* currently setup by downloader */ + .gpccon = 0xaa940659, + .gpccon_mask = 0xffffffff, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + .gpdcon = 0xaa84aaa0, + .gpdcon_mask = 0xffffffff, + .gpdup = 0x0000faff, + .gpdup_mask = 0xffffffff, +#endif + + .lpcsel = ((0xCE6) & ~7) | 1<<4, +}; + +static struct platform_device *smdk2440_devices[] __initdata = { + &s3c_device_ohci, + &s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_iis, +}; + +static void __init smdk2440_map_io(void) +{ + s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); + s3c24xx_init_clocks(16934400); + s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); +} + +static void __init smdk2440_machine_init(void) +{ + s3c24xx_fb_set_platdata(&smdk2440_fb_info); + s3c_i2c0_set_platdata(NULL); + + platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices)); + smdk_machine_init(); +} + +MACHINE_START(S3C2440, "SMDK2440") + /* Maintainer: Ben Dooks */ + .atag_offset = 0x100, + + .init_irq = s3c24xx_init_irq, + .map_io = smdk2440_map_io, + .init_machine = smdk2440_machine_init, + .timer = &s3c24xx_timer, + .restart = s3c2440_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c new file mode 100644 index 00000000000..517623a09fc --- /dev/null +++ b/arch/arm/mach-s3c24xx/s3c2440.c @@ -0,0 +1,88 @@ +/* linux/arch/arm/mach-s3c2440/s3c2440.c + * + * Copyright (c) 2004-2006 Simtec Electronics + * Ben Dooks + * + * Samsung S3C2440 Mobile CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include + +static struct device s3c2440_dev = { + .bus = &s3c2440_subsys, +}; + +int __init s3c2440_init(void) +{ + printk("S3C2440: Initialising architecture\n"); + + /* change irq for watchdog */ + + s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; + s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT; + + /* register suspend/resume handlers */ + +#ifdef CONFIG_PM + register_syscore_ops(&s3c2410_pm_syscore_ops); +#endif + register_syscore_ops(&s3c244x_pm_syscore_ops); + register_syscore_ops(&s3c24xx_irq_syscore_ops); + + /* register our system device for everything else */ + + return device_register(&s3c2440_dev); +} + +void __init s3c2440_map_io(void) +{ + s3c244x_map_io(); + + s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; +} + +void s3c2440_restart(char mode, const char *cmd) +{ + if (mode == 's') { + soft_restart(0); + } + + arch_wdt_reset(); + + /* we'll take a jump through zero as a poor second */ + soft_restart(0); +} diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c new file mode 100644 index 00000000000..8004e0497bf --- /dev/null +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -0,0 +1,188 @@ +/* linux/arch/arm/mach-s3c2442/s3c2442.c + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2442 core and lock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include +#include +#include + +/* S3C2442 extended clock support */ + +static unsigned long s3c2442_camif_upll_round(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + int div; + + if (rate > parent_rate) + return parent_rate; + + div = parent_rate / rate; + + if (div == 3) + return parent_rate / 3; + + /* note, we remove the +/- 1 calculations for the divisor */ + + div /= 2; + + if (div < 1) + div = 1; + else if (div > 16) + div = 16; + + return parent_rate / (div * 2); +} + +static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); + + rate = s3c2442_camif_upll_round(clk, rate); + + camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3; + + if (rate == parent_rate) { + camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL; + } else if ((parent_rate / rate) == 3) { + camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; + camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3; + } else { + camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK; + camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; + camdivn |= (((parent_rate / rate) / 2) - 1); + } + + __raw_writel(camdivn, S3C2440_CAMDIVN); + + return 0; +} + +/* Extra S3C2442 clocks */ + +static struct clk s3c2442_clk_cam = { + .name = "camif", + .id = -1, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2440_CLKCON_CAMERA, +}; + +static struct clk s3c2442_clk_cam_upll = { + .name = "camif-upll", + .id = -1, + .ops = &(struct clk_ops) { + .set_rate = s3c2442_camif_upll_setrate, + .round_rate = s3c2442_camif_upll_round, + }, +}; + +static int s3c2442_clk_add(struct device *dev) +{ + struct clk *clock_upll; + struct clk *clock_h; + struct clk *clock_p; + + clock_p = clk_get(NULL, "pclk"); + clock_h = clk_get(NULL, "hclk"); + clock_upll = clk_get(NULL, "upll"); + + if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { + printk(KERN_ERR "S3C2442: Failed to get parent clocks\n"); + return -EINVAL; + } + + s3c2442_clk_cam.parent = clock_h; + s3c2442_clk_cam_upll.parent = clock_upll; + + s3c24xx_register_clock(&s3c2442_clk_cam); + s3c24xx_register_clock(&s3c2442_clk_cam_upll); + + clk_disable(&s3c2442_clk_cam); + + return 0; +} + +static struct subsys_interface s3c2442_clk_interface = { + .name = "s3c2442_clk", + .subsys = &s3c2442_subsys, + .add_dev = s3c2442_clk_add, +}; + +static __init int s3c2442_clk_init(void) +{ + return subsys_interface_register(&s3c2442_clk_interface); +} + +arch_initcall(s3c2442_clk_init); + + +static struct device s3c2442_dev = { + .bus = &s3c2442_subsys, +}; + +int __init s3c2442_init(void) +{ + printk("S3C2442: Initialising architecture\n"); + +#ifdef CONFIG_PM + register_syscore_ops(&s3c2410_pm_syscore_ops); +#endif + register_syscore_ops(&s3c244x_pm_syscore_ops); + register_syscore_ops(&s3c24xx_irq_syscore_ops); + + return device_register(&s3c2442_dev); +} + +void __init s3c2442_map_io(void) +{ + s3c244x_map_io(); + + s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down; + s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down; +} diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c new file mode 100644 index 00000000000..36bc60f61d0 --- /dev/null +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -0,0 +1,198 @@ +/* linux/arch/arm/plat-s3c24xx/s3c244x.c + * + * Copyright (c) 2004-2006 Simtec Electronics + * Ben Dooks + * + * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct map_desc s3c244x_iodesc[] __initdata = { + IODESC_ENT(CLKPWR), + IODESC_ENT(TIMER), + IODESC_ENT(WATCHDOG), +}; + +/* uart initialisation */ + +void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); +} + +void __init s3c244x_map_io(void) +{ + /* register our io-tables */ + + iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc)); + + /* rename any peripherals used differing from the s3c2410 */ + + s3c_device_sdi.name = "s3c2440-sdi"; + s3c_device_i2c0.name = "s3c2440-i2c"; + s3c_nand_setname("s3c2440-nand"); + s3c_device_ts.name = "s3c2440-ts"; + s3c_device_usbgadget.name = "s3c2440-usbgadget"; +} + +void __init_or_cpufreq s3c244x_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long clkdiv; + unsigned long camdiv; + unsigned long xtal; + unsigned long hclk, fclk, pclk; + int hdiv = 1; + + xtal_clk = clk_get(NULL, "xtal"); + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; + + clkdiv = __raw_readl(S3C2410_CLKDIVN); + camdiv = __raw_readl(S3C2440_CAMDIVN); + + /* work out clock scalings */ + + switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) { + case S3C2440_CLKDIVN_HDIVN_1: + hdiv = 1; + break; + + case S3C2440_CLKDIVN_HDIVN_2: + hdiv = 2; + break; + + case S3C2440_CLKDIVN_HDIVN_4_8: + hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4; + break; + + case S3C2440_CLKDIVN_HDIVN_3_6: + hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3; + break; + } + + hclk = fclk / hdiv; + pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1); + + /* print brief summary of clocks, etc */ + + printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", + print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); + + s3c24xx_setup_clocks(fclk, hclk, pclk); +} + +void __init s3c244x_init_clocks(int xtal) +{ + /* initialise the clocks here, to allow other things like the + * console to use them, and to add new ones after the initialisation + */ + + s3c24xx_register_baseclocks(xtal); + s3c244x_setup_clocks(); + s3c2410_baseclk_add(); +} + +/* Since the S3C2442 and S3C2440 share items, put both subsystems here */ + +struct bus_type s3c2440_subsys = { + .name = "s3c2440-core", + .dev_name = "s3c2440-core", +}; + +struct bus_type s3c2442_subsys = { + .name = "s3c2442-core", + .dev_name = "s3c2442-core", +}; + +/* need to register the subsystem before we actually register the device, and + * we also need to ensure that it has been initialised before any of the + * drivers even try to use it (even if not on an s3c2440 based system) + * as a driver which may support both 2410 and 2440 may try and use it. +*/ + +static int __init s3c2440_core_init(void) +{ + return subsys_system_register(&s3c2440_subsys, NULL); +} + +core_initcall(s3c2440_core_init); + +static int __init s3c2442_core_init(void) +{ + return subsys_system_register(&s3c2442_subsys, NULL); +} + +core_initcall(s3c2442_core_init); + + +#ifdef CONFIG_PM +static struct sleep_save s3c244x_sleep[] = { + SAVE_ITEM(S3C2440_DSC0), + SAVE_ITEM(S3C2440_DSC1), + SAVE_ITEM(S3C2440_GPJDAT), + SAVE_ITEM(S3C2440_GPJCON), + SAVE_ITEM(S3C2440_GPJUP) +}; + +static int s3c244x_suspend(void) +{ + s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); + return 0; +} + +static void s3c244x_resume(void) +{ + s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); +} +#else +#define s3c244x_suspend NULL +#define s3c244x_resume NULL +#endif + +struct syscore_ops s3c244x_pm_syscore_ops = { + .suspend = s3c244x_suspend, + .resume = s3c244x_resume, +}; -- cgit v1.2.3-70-g09d2