From 551948bc44260a5ab3ad63546506b2062f77eaa0 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 19 Mar 2007 19:17:00 +0300 Subject: [CPUFREQ] p4-clockmod: switch to rdmsr_on_cpu/wrmsr_on_cpu Dances with cpumasks go away. Signed-off-by: Alexey Dobriyan Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/p4-clockmod.c | 31 ++++++------------------------ 1 file changed, 6 insertions(+), 25 deletions(-) diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c index 4786fedca6e..4c76b511e19 100644 --- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c @@ -27,7 +27,6 @@ #include #include #include -#include /* current / set_cpus_allowed() */ #include #include @@ -62,7 +61,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV)) return -EINVAL; - rdmsr(MSR_IA32_THERM_STATUS, l, h); + rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); if (l & 0x01) dprintk("CPU#%d currently thermal throttled\n", cpu); @@ -70,10 +69,10 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT)) newstate = DC_38PT; - rdmsr(MSR_IA32_THERM_CONTROL, l, h); + rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); if (newstate == DC_DISABLE) { dprintk("CPU#%d disabling modulation\n", cpu); - wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); + wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); } else { dprintk("CPU#%d setting duty cycle to %d%%\n", cpu, ((125 * newstate) / 10)); @@ -84,7 +83,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) */ l = (l & ~14); l = l | (1<<4) | ((newstate & 0x7)<<1); - wrmsr(MSR_IA32_THERM_CONTROL, l, h); + wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h); } return 0; @@ -111,7 +110,6 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, { unsigned int newstate = DC_RESV; struct cpufreq_freqs freqs; - cpumask_t cpus_allowed; int i; if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate)) @@ -132,17 +130,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software * Developer's Manual, Volume 3 */ - cpus_allowed = current->cpus_allowed; - - for_each_cpu_mask(i, policy->cpus) { - cpumask_t this_cpu = cpumask_of_cpu(i); - - set_cpus_allowed(current, this_cpu); - BUG_ON(smp_processor_id() != i); - + for_each_cpu_mask(i, policy->cpus) cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); - } - set_cpus_allowed(current, cpus_allowed); /* notifiers */ for_each_cpu_mask(i, policy->cpus) { @@ -256,17 +245,9 @@ static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy) static unsigned int cpufreq_p4_get(unsigned int cpu) { - cpumask_t cpus_allowed; u32 l, h; - cpus_allowed = current->cpus_allowed; - - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - BUG_ON(smp_processor_id() != cpu); - - rdmsr(MSR_IA32_THERM_CONTROL, l, h); - - set_cpus_allowed(current, cpus_allowed); + rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); if (l & 0x10) { l = l >> 1; -- cgit v1.2.3-70-g09d2 From fb48e15645fb702cb2ec02c84f82ece2fbc1574d Mon Sep 17 00:00:00 2001 From: Rafał Bilski Date: Fri, 2 Mar 2007 20:12:27 +0100 Subject: [CPUFREQ] Longhaul - Correct PCI code Replace obsolete pci_find_device with pci_get_device. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 2b030d6ccbf..e5fee726634 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -590,20 +590,23 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle, static int enable_arbiter_disable(void) { struct pci_dev *dev; + int status; int reg; u8 pci_cmd; + status = 1; /* Find PLE133 host bridge */ reg = 0x78; - dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL); + dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, + NULL); /* Find CLE266 host bridge */ if (dev == NULL) { reg = 0x76; - dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL); + dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_862X_0, NULL); /* Find CN400 V-Link host bridge */ if (dev == NULL) - dev = pci_find_device(PCI_VENDOR_ID_VIA, 0x7259, NULL); - + dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL); } if (dev != NULL) { /* Enable access to port 0x22 */ @@ -615,10 +618,11 @@ static int enable_arbiter_disable(void) if (!(pci_cmd & 1<<7)) { printk(KERN_ERR PFX "Can't enable access to port 0x22.\n"); - return 0; + status = 0; } } - return 1; + pci_dev_put(dev); + return status; } return 0; } @@ -629,7 +633,7 @@ static int longhaul_setup_vt8235(void) u8 pci_cmd; /* Find VT8235 southbridge */ - dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); + dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); if (dev != NULL) { /* Set transition time to max */ pci_read_config_byte(dev, 0xec, &pci_cmd); @@ -641,6 +645,7 @@ static int longhaul_setup_vt8235(void) pci_read_config_byte(dev, 0xe5, &pci_cmd); pci_cmd |= 1 << 7; pci_write_config_byte(dev, 0xe5, pci_cmd); + pci_dev_put(dev); return 1; } return 0; -- cgit v1.2.3-70-g09d2 From e8e49190f64896afe79f7136a67c2bdefbd3e322 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 11 Apr 2007 18:22:34 -0400 Subject: Fix preemption warnings in speedstep-centrino.c BUG: using smp_processor_id() in preemptible [00000001] code: kondemand/0/2473 caller is centrino_target+0xfb/0x600 [<401e3646>] debug_smp_processor_id+0x9e/0xb0 [<40112afb>] centrino_target+0xfb/0x600 [<40112a00>] centrino_target+0x0/0x600 [<40305bd9>] __cpufreq_driver_target+0x5c/0x6b [] do_dbs_timer+0x1bc/0x208 [cpufreq_ondemand] [<40134a46>] run_workqueue+0x85/0x125 [<40374f7f>] _spin_lock_irqsave+0x18/0x66 [] do_dbs_timer+0x0/0x208 [cpufreq_ondemand] [<401353fb>] worker_thread+0xf9/0x124 [<401213b9>] default_wake_function+0x0/0xc [<40135302>] worker_thread+0x0/0x124 [<40137b37>] kthread+0xb0/0xd9 [<40137a87>] kthread+0x0/0xd9 [<40104b2f>] kernel_thread_helper+0x7/0x10 Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index f43b987f952..35489fd6885 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -720,6 +720,7 @@ static int centrino_target (struct cpufreq_policy *policy, cpu_set(j, set_mask); set_cpus_allowed(current, set_mask); + preempt_disable(); if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) { dprintk("couldn't limit to CPUs in this domain\n"); retval = -EAGAIN; @@ -727,6 +728,7 @@ static int centrino_target (struct cpufreq_policy *policy, /* We haven't started the transition yet. */ goto migrate_end; } + preempt_enable(); break; } @@ -761,10 +763,13 @@ static int centrino_target (struct cpufreq_policy *policy, } wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { + preempt_enable(); break; + } cpu_set(j, covered_cpus); + preempt_enable(); } for_each_cpu_mask(k, online_policy_cpus) { @@ -796,8 +801,11 @@ static int centrino_target (struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } } + set_cpus_allowed(current, saved_mask); + return 0; migrate_end: + preempt_enable(); set_cpus_allowed(current, saved_mask); return 0; } -- cgit v1.2.3-70-g09d2 From 22c970f3468a6766b362d57fa32ebb92cb8cd6db Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Thu, 19 Apr 2007 15:48:34 +0200 Subject: [CPUFREQ] Fix limited cpufreq when booted on battery References: https://bugzilla.novell.com/show_bug.cgi?id=231107 https://bugzilla.novell.com/show_bug.cgi?id=264077 Fix limited cpufreq when booted on battery If booted on battery: cpufreq_set_policy (evil) is invoked which calls verify_within_limits. max_freq gets lowered and therefore users_policy.max, which is used to restore higher freqs via update_policy later is set to the already limited frequency -> you can never go up again, even BIOS allows higher freqs later. Signed-off-by: Thomas Renninger Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 3162010900c..fcb86dd8903 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -768,6 +768,9 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) unlock_policy_rwsem_write(cpu); goto err_out; } + policy->user_policy.min = policy->cpuinfo.min_freq; + policy->user_policy.max = policy->cpuinfo.max_freq; + policy->user_policy.governor = policy->governor; #ifdef CONFIG_SMP for_each_cpu_mask(j, policy->cpus) { @@ -858,10 +861,13 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) policy->governor = NULL; /* to assure that the starting sequence is * run in cpufreq_set_policy */ - unlock_policy_rwsem_write(cpu); /* set default policy */ - ret = cpufreq_set_policy(&new_policy); + ret = __cpufreq_set_policy(policy, &new_policy); + policy->user_policy.policy = policy->policy; + + unlock_policy_rwsem_write(cpu); + if (ret) { dprintk("setting policy failed\n"); goto err_out_unregister; -- cgit v1.2.3-70-g09d2 From 632786ce9ff6206951ee4c84fe5c0d5c1d12f4cc Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Thu, 19 Apr 2007 15:49:09 +0200 Subject: [CPUFREQ] Remove deprecated /proc/acpi/processor/performance write support Remove deprecated /proc/acpi/processor/performance write support Writing to /proc/acpi/processor/xy/performance interferes with sysfs cpufreq interface. Also removes buggy cpufreq_set_policy exported symbol. Signed-off-by: Thomas Renninger Signed-off-by: Dave Jones --- drivers/acpi/processor_perflib.c | 46 +--------------------------------------- drivers/cpufreq/cpufreq.c | 37 -------------------------------- include/linux/cpufreq.h | 1 - 3 files changed, 1 insertion(+), 83 deletions(-) diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 2f2e7964226..c4efc0c17f8 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -433,49 +433,6 @@ static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file) PDE(inode)->data); } -static ssize_t -acpi_processor_write_performance(struct file *file, - const char __user * buffer, - size_t count, loff_t * data) -{ - int result = 0; - struct seq_file *m = file->private_data; - struct acpi_processor *pr = m->private; - struct acpi_processor_performance *perf; - char state_string[12] = { '\0' }; - unsigned int new_state = 0; - struct cpufreq_policy policy; - - - if (!pr || (count > sizeof(state_string) - 1)) - return -EINVAL; - - perf = pr->performance; - if (!perf) - return -EINVAL; - - if (copy_from_user(state_string, buffer, count)) - return -EFAULT; - - state_string[count] = '\0'; - new_state = simple_strtoul(state_string, NULL, 0); - - if (new_state >= perf->state_count) - return -EINVAL; - - cpufreq_get_policy(&policy, pr->id); - - policy.cpu = pr->id; - policy.min = perf->states[new_state].core_frequency * 1000; - policy.max = perf->states[new_state].core_frequency * 1000; - - result = cpufreq_set_policy(&policy); - if (result) - return result; - - return count; -} - static void acpi_cpufreq_add_file(struct acpi_processor *pr) { struct proc_dir_entry *entry = NULL; @@ -487,10 +444,9 @@ static void acpi_cpufreq_add_file(struct acpi_processor *pr) /* add file 'performance' [R/W] */ entry = create_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE, - S_IFREG | S_IRUGO | S_IWUSR, + S_IFREG | S_IRUGO, acpi_device_dir(device)); if (entry){ - acpi_processor_perf_fops.write = acpi_processor_write_performance; entry->proc_fops = &acpi_processor_perf_fops; entry->data = acpi_driver_data(device); entry->owner = THIS_MODULE; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index fcb86dd8903..893dbaf386f 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1625,43 +1625,6 @@ error_out: return ret; } -/** - * cpufreq_set_policy - set a new CPUFreq policy - * @policy: policy to be set. - * - * Sets a new CPU frequency and voltage scaling policy. - */ -int cpufreq_set_policy(struct cpufreq_policy *policy) -{ - int ret = 0; - struct cpufreq_policy *data; - - if (!policy) - return -EINVAL; - - data = cpufreq_cpu_get(policy->cpu); - if (!data) - return -EINVAL; - - if (unlikely(lock_policy_rwsem_write(policy->cpu))) - return -EINVAL; - - - ret = __cpufreq_set_policy(data, policy); - data->user_policy.min = data->min; - data->user_policy.max = data->max; - data->user_policy.policy = data->policy; - data->user_policy.governor = data->governor; - - unlock_policy_rwsem_write(policy->cpu); - - cpufreq_cpu_put(data); - - return ret; -} -EXPORT_SYMBOL(cpufreq_set_policy); - - /** * cpufreq_update_policy - re-evaluate an existing cpufreq policy * @cpu: CPU which shall be re-evaluated diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 0899e2cdcdd..3ec6e7ff5fb 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -257,7 +257,6 @@ struct freq_attr { /********************************************************************* * CPUFREQ 2.6. INTERFACE * *********************************************************************/ -int cpufreq_set_policy(struct cpufreq_policy *policy); int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu); int cpufreq_update_policy(unsigned int cpu); -- cgit v1.2.3-70-g09d2 From 07844252ffd81ec192a62014bada1016c9703765 Mon Sep 17 00:00:00 2001 From: Rafal Bilski Date: Sun, 22 Apr 2007 12:26:04 +0200 Subject: [CPUFREQ] Longhaul - Revert Longhaul ver. 2 There is something wrong with this code. It needs more testing. It is better to disable it for now because support for some machines will be broken. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index e5fee726634..a3df9c039bd 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -683,7 +683,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) sizeof(samuel2_eblcr)); break; case 1 ... 15: - longhaul_version = TYPE_LONGHAUL_V2; + longhaul_version = TYPE_LONGHAUL_V1; if (c->x86_mask < 8) { cpu_model = CPU_SAMUEL2; cpuname = "C3 'Samuel 2' [C5B]"; -- cgit v1.2.3-70-g09d2 From 9101be532a3c60c7e8773868395e3b75259d84c3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 18 Apr 2007 16:18:13 -0400 Subject: [CPUFREQ] cleanup kconfig options Adds proper lines to help output of kconfig so people can find the module names. Also fixed some broken leading spaces versus tabs. Signed-off-by: Mike Frysinger Signed-off-by: Dave Jones --- arch/x86_64/kernel/cpufreq/Kconfig | 19 +++++++++--- drivers/cpufreq/Kconfig | 61 +++++++++++++++++++++++++++----------- 2 files changed, 58 insertions(+), 22 deletions(-) diff --git a/arch/x86_64/kernel/cpufreq/Kconfig b/arch/x86_64/kernel/cpufreq/Kconfig index 40acb67fb88..c0749d2479f 100644 --- a/arch/x86_64/kernel/cpufreq/Kconfig +++ b/arch/x86_64/kernel/cpufreq/Kconfig @@ -16,6 +16,9 @@ config X86_POWERNOW_K8 help This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. + To compile this driver as a module, choose M here: the + module will be called powernow-k8. + For details, take a look at . If in doubt, say N. @@ -38,6 +41,9 @@ config X86_SPEEDSTEP_CENTRINO mobile CPUs. This means Intel Pentium M (Centrino) CPUs or 64bit enabled Intel Xeons. + To compile this driver as a module, choose M here: the + module will be called speedstep-centrino. + For details, take a look at . If in doubt, say N. @@ -55,6 +61,9 @@ config X86_ACPI_CPUFREQ Processor Performance States. This driver also supports Intel Enhanced Speedstep. + To compile this driver as a module, choose M here: the + module will be called acpi-cpufreq. + For details, take a look at . If in doubt, say N. @@ -62,7 +71,7 @@ config X86_ACPI_CPUFREQ comment "shared options" config X86_ACPI_CPUFREQ_PROC_INTF - bool "/proc/acpi/processor/../performance interface (deprecated)" + bool "/proc/acpi/processor/../performance interface (deprecated)" depends on PROC_FS depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K8_ACPI help @@ -86,16 +95,18 @@ config X86_P4_CLOCKMOD slowdowns and noticeable latencies. Normally Speedstep should be used instead. + To compile this driver as a module, choose M here: the + module will be called p4-clockmod. + For details, take a look at . Unless you are absolutely sure say N. config X86_SPEEDSTEP_LIB - tristate - default X86_P4_CLOCKMOD + tristate + default X86_P4_CLOCKMOD endif endmenu - diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index d155e81b5c9..993fa7b8925 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -9,6 +9,9 @@ config CPU_FREQ clock speed, you need to either enable a dynamic cpufreq governor (see below) after boot, or use a userspace tool. + To compile this driver as a module, choose M here: the + module will be called cpufreq. + For details, take a look at . If in doubt, say N. @@ -16,7 +19,7 @@ config CPU_FREQ if CPU_FREQ config CPU_FREQ_TABLE - tristate + tristate config CPU_FREQ_DEBUG bool "Enable CPUfreq debugging" @@ -32,19 +35,26 @@ config CPU_FREQ_DEBUG 4 to activate CPUfreq governor debugging config CPU_FREQ_STAT - tristate "CPU frequency translation statistics" - select CPU_FREQ_TABLE - default y - help - This driver exports CPU frequency statistics information through sysfs - file system + tristate "CPU frequency translation statistics" + select CPU_FREQ_TABLE + default y + help + This driver exports CPU frequency statistics information through sysfs + file system. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_stats. + + If in doubt, say N. config CPU_FREQ_STAT_DETAILS - bool "CPU frequency translation statistics details" - depends on CPU_FREQ_STAT - help - This will show detail CPU frequency translation table in sysfs file - system + bool "CPU frequency translation statistics details" + depends on CPU_FREQ_STAT + help + This will show detail CPU frequency translation table in sysfs file + system. + + If in doubt, say N. # Note that it is not currently possible to set the other governors (such as ondemand) # as the default, since if they fail to initialise, cpufreq will be @@ -78,29 +88,38 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE endchoice config CPU_FREQ_GOV_PERFORMANCE - tristate "'performance' governor" - help + tristate "'performance' governor" + help This cpufreq governor sets the frequency statically to the highest available CPU frequency. + To compile this driver as a module, choose M here: the + module will be called cpufreq_performance. + If in doubt, say Y. config CPU_FREQ_GOV_POWERSAVE - tristate "'powersave' governor" - help + tristate "'powersave' governor" + help This cpufreq governor sets the frequency statically to the lowest available CPU frequency. + To compile this driver as a module, choose M here: the + module will be called cpufreq_powersave. + If in doubt, say Y. config CPU_FREQ_GOV_USERSPACE - tristate "'userspace' governor for userspace frequency scaling" - help + tristate "'userspace' governor for userspace frequency scaling" + help Enable this cpufreq governor when you either want to set the CPU frequency manually or when an userspace program shall be able to set the CPU dynamically, like on LART . + To compile this driver as a module, choose M here: the + module will be called cpufreq_userspace. + For details, take a look at . If in doubt, say Y. @@ -116,6 +135,9 @@ config CPU_FREQ_GOV_ONDEMAND do fast frequency switching (i.e, very low latency frequency transitions). + To compile this driver as a module, choose M here: the + module will be called cpufreq_ondemand. + For details, take a look at linux/Documentation/cpu-freq. If in doubt, say N. @@ -136,6 +158,9 @@ config CPU_FREQ_GOV_CONSERVATIVE step-by-step latency issues between the minimum and maximum frequency transitions in the CPU) you will probably want to use this governor. + To compile this driver as a module, choose M here: the + module will be called cpufreq_conservative. + For details, take a look at linux/Documentation/cpu-freq. If in doubt, say N. -- cgit v1.2.3-70-g09d2 From b96e80e3237777e5d7994a720ab722eb8f7edc60 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 30 Apr 2007 07:34:37 -0700 Subject: [CPUFREQ] do not declare undefined functions fill_powernow_table_pstate() and fill_powernow_table_fidvid() are only defined and used for X86_POWERNOW_K8_ACPI. Signed-off-by: David Rientjes Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/powernow-k8.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h index 0fb2a3001ba..95be5013c98 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h @@ -215,8 +215,10 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); +#ifdef CONFIG_X86_POWERNOW_K8_ACPI static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); +#endif #ifdef CONFIG_SMP static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) -- cgit v1.2.3-70-g09d2 From 2e4976206396274cf66590328c6913811c271495 Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Mon, 30 Apr 2007 14:15:05 -0500 Subject: [CPUFREQ] Report the number of processors in PowerNow-k8 correctly The PowerNow! driver for Opteron reports the number of cores in the system, but claims to report the number of processors. Fix this minor cosmetic bug. Signed-off-by: Bhavana Nagendra Acked-by: Mark Langsdorf Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index fe3b67005eb..7cf3d207b6b 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -661,7 +661,8 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid); data->powernow_table = powernow_table; - print_basics(data); + if (first_cpu(cpu_core_map[data->cpu]) == data->cpu) + print_basics(data); for (j = 0; j < data->numps; j++) if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid)) @@ -814,7 +815,8 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) /* fill in data */ data->numps = data->acpi_data.state_count; - print_basics(data); + if (first_cpu(cpu_core_map[data->cpu]) == data->cpu) + print_basics(data); powernow_k8_acpi_pst_values(data, 0); /* notify BIOS that we exist */ -- cgit v1.2.3-70-g09d2