From e1ccbb65499b8ba1d90ae2134d56888c95e504bd Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Wed, 25 Sep 2013 00:36:56 +0200 Subject: MIPS: BCM47XX: add EARLY_PRINTK_8250 support The BCM47xx SoCs have a 8250 serial compatible console at address 0x18000300 and an other at 0x18000400. On most devices 0x18000300 is wired to some pins on the board, we should use that. This is the smae for the AI (bcma) and the SB (ssb) bus, this is some offset on the chip common core. Signed-off-by: Hauke Mehrtens Tested-by: Aaro Koskinen Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/5889/ --- arch/mips/Kconfig | 2 ++ arch/mips/bcm47xx/prom.c | 9 +++++++++ 2 files changed, 11 insertions(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 27b62f40590..8f519a51585 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -120,6 +120,8 @@ config BCM47XX select NO_EXCEPT_FILL select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK + select EARLY_PRINTK_8250 if EARLY_PRINTK help Support for BCM47XX based boards diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c index 99c3ce2d5b9..0af808dfd1c 100644 --- a/arch/mips/bcm47xx/prom.c +++ b/arch/mips/bcm47xx/prom.c @@ -28,6 +28,8 @@ #include #include #include +#include +#include #include #include #include @@ -94,9 +96,16 @@ static __init void prom_init_mem(void) add_memory_region(0, mem, BOOT_MEM_RAM); } +/* + * This is the first serial on the chip common core, it is at this position + * for sb (ssb) and ai (bcma) bus. + */ +#define BCM47XX_SERIAL_ADDR (SSB_ENUM_BASE + SSB_CHIPCO_UART0_DATA) + void __init prom_init(void) { prom_init_mem(); + setup_8250_early_printk_port(CKSEG1ADDR(BCM47XX_SERIAL_ADDR), 0, 0); } void __init prom_free_prom_memory(void) -- cgit v1.2.3-70-g09d2