From e39d5ef678045d61812c1401f04fe8edb14d6359 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Mon, 9 Aug 2010 07:58:48 +0200 Subject: powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios The GPIO controller of MPC512x is slightly different from 8xxx GPIO controllers. The register interface is the same except the external interrupt control register. The MPC512x GPIO controller differentiates between four interrupt event types and therefore provides two interrupt control registers, GPICR1 and GPICR2. GPIO[0:15] interrupt event types are configured in GPICR1 register, GPIO[16:31] - in GPICR2 register. This patch adds MPC512x speciffic set_type() callback and updates config file and comments. Additionally the gpio chip registration function is changed to use for_each_matching_node() preventing multiple registration if a node claimes compatibility with another gpio controller type. Signed-off-by: Anatolij Gustschin Signed-off-by: Grant Likely --- arch/powerpc/platforms/Kconfig | 7 ++-- arch/powerpc/sysdev/mpc8xxx_gpio.c | 75 ++++++++++++++++++++++++++++++++++---- 2 files changed, 71 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index d1663db7810..471115a13d1 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -304,13 +304,14 @@ config OF_RTC source "arch/powerpc/sysdev/bestcomm/Kconfig" config MPC8xxx_GPIO - bool "MPC8xxx GPIO support" - depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || FSL_SOC_BOOKE || PPC_86xx + bool "MPC512x/MPC8xxx GPIO support" + depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ + FSL_SOC_BOOKE || PPC_86xx select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Say Y here if you're going to use hardware that connects to the - MPC831x/834x/837x/8572/8610 GPIOs. + MPC512x/831x/834x/837x/8572/8610 GPIOs. config SIMPLE_GPIO bool "Support for simple, memory-mapped GPIO controllers" diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c index 2b69084d0f0..36499394a16 100644 --- a/arch/powerpc/sysdev/mpc8xxx_gpio.c +++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c @@ -1,5 +1,5 @@ /* - * GPIOs on MPC8349/8572/8610 and compatible + * GPIOs on MPC512x/8349/8572/8610 and compatible * * Copyright (C) 2008 Peter Korsgaard * @@ -26,6 +26,7 @@ #define GPIO_IER 0x0c #define GPIO_IMR 0x10 #define GPIO_ICR 0x14 +#define GPIO_ICR2 0x18 struct mpc8xxx_gpio_chip { struct of_mm_gpio_chip mm_gc; @@ -37,6 +38,7 @@ struct mpc8xxx_gpio_chip { */ u32 data; struct irq_host *irq; + void *of_dev_id_data; }; static inline u32 mpc8xxx_gpio2mask(unsigned int gpio) @@ -215,6 +217,51 @@ static int mpc8xxx_irq_set_type(unsigned int virq, unsigned int flow_type) return 0; } +static int mpc512x_irq_set_type(unsigned int virq, unsigned int flow_type) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq); + struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc; + unsigned long gpio = virq_to_hw(virq); + void __iomem *reg; + unsigned int shift; + unsigned long flags; + + if (gpio < 16) { + reg = mm->regs + GPIO_ICR; + shift = (15 - gpio) * 2; + } else { + reg = mm->regs + GPIO_ICR2; + shift = (15 - (gpio % 16)) * 2; + } + + switch (flow_type) { + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + clrsetbits_be32(reg, 3 << shift, 2 << shift); + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_LEVEL_HIGH: + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + clrsetbits_be32(reg, 3 << shift, 1 << shift); + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + case IRQ_TYPE_EDGE_BOTH: + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + clrbits32(reg, 3 << shift); + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + default: + return -EINVAL; + } + + return 0; +} + static struct irq_chip mpc8xxx_irq_chip = { .name = "mpc8xxx-gpio", .unmask = mpc8xxx_irq_unmask, @@ -226,6 +273,11 @@ static struct irq_chip mpc8xxx_irq_chip = { static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { + struct mpc8xxx_gpio_chip *mpc8xxx_gc = h->host_data; + + if (mpc8xxx_gc->of_dev_id_data) + mpc8xxx_irq_chip.set_type = mpc8xxx_gc->of_dev_id_data; + set_irq_chip_data(virq, h->host_data); set_irq_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq); set_irq_type(virq, IRQ_TYPE_NONE); @@ -253,11 +305,20 @@ static struct irq_host_ops mpc8xxx_gpio_irq_ops = { .xlate = mpc8xxx_gpio_irq_xlate, }; +static struct of_device_id mpc8xxx_gpio_ids[] __initdata = { + { .compatible = "fsl,mpc8349-gpio", }, + { .compatible = "fsl,mpc8572-gpio", }, + { .compatible = "fsl,mpc8610-gpio", }, + { .compatible = "fsl,mpc5121-gpio", .data = mpc512x_irq_set_type, }, + {} +}; + static void __init mpc8xxx_add_controller(struct device_node *np) { struct mpc8xxx_gpio_chip *mpc8xxx_gc; struct of_mm_gpio_chip *mm_gc; struct gpio_chip *gc; + const struct of_device_id *id; unsigned hwirq; int ret; @@ -297,6 +358,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np) if (!mpc8xxx_gc->irq) goto skip_irq; + id = of_match_node(mpc8xxx_gpio_ids, np); + if (id) + mpc8xxx_gc->of_dev_id_data = id->data; + mpc8xxx_gc->irq->host_data = mpc8xxx_gc; /* ack and mask all irqs */ @@ -321,13 +386,7 @@ static int __init mpc8xxx_add_gpiochips(void) { struct device_node *np; - for_each_compatible_node(np, NULL, "fsl,mpc8349-gpio") - mpc8xxx_add_controller(np); - - for_each_compatible_node(np, NULL, "fsl,mpc8572-gpio") - mpc8xxx_add_controller(np); - - for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio") + for_each_matching_node(np, mpc8xxx_gpio_ids) mpc8xxx_add_controller(np); return 0; -- cgit v1.2.3-70-g09d2 From b690c425fe07c725e7f1f7d40303588416cba67f Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Fri, 29 Oct 2010 13:25:24 -0700 Subject: SPARC/LEON: removed constant timer initialization as if HZ=100, now it reflects the value of HZ Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- arch/sparc/kernel/leon_kernel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c index 2d51527d810..f01c42661ee 100644 --- a/arch/sparc/kernel/leon_kernel.c +++ b/arch/sparc/kernel/leon_kernel.c @@ -114,7 +114,7 @@ void __init leon_init_timers(irq_handler_t counter_fn) if (leon3_gptimer_regs && leon3_irqctrl_regs) { LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0); LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld, - (((1000000 / 100) - 1))); + (((1000000 / HZ) - 1))); LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0); #ifdef CONFIG_SMP @@ -128,7 +128,7 @@ void __init leon_init_timers(irq_handler_t counter_fn) } LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].val, 0); - LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/100) - 1))); + LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/HZ) - 1))); LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl, 0); # endif -- cgit v1.2.3-70-g09d2 From 587d145200f26758940099fbbc301fdd43d3f391 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 25 Oct 2010 19:44:21 -0700 Subject: HID: Remove KERN_DEBUG from dbg_hid use Signed-off-by: Joe Perches Signed-off-by: Jiri Kosina --- drivers/hid/hid-input.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 834ef47b76d..76e1f64e976 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -136,7 +136,8 @@ static int hidinput_setkeycode(struct input_dev *dev, clear_bit(old_keycode, dev->keybit); set_bit(usage->code, dev->keybit); - dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n", keycode, scancode); + dbg_hid("Assigned keycode %d to HID usage code %x\n", + keycode, scancode); /* Set the keybit for the old keycode if the old keycode is used * by another key */ if (hidinput_find_key (hid, 0, old_keycode)) -- cgit v1.2.3-70-g09d2 From 5a39ce5b491a10f4a15bd30b26e55d3533b5f587 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 13 Oct 2010 15:58:17 +0200 Subject: HID: egalax: Use kzalloc To avoid unnecessary explicit initialization, allocate zeroed memory. Signed-off-by: Henrik Rydberg Acked-by: Chase Douglas Signed-off-by: Jiri Kosina --- drivers/hid/hid-egalax.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c index 54b017ad258..5a1b52e0eb8 100644 --- a/drivers/hid/hid-egalax.c +++ b/drivers/hid/hid-egalax.c @@ -221,7 +221,7 @@ static int egalax_probe(struct hid_device *hdev, const struct hid_device_id *id) struct egalax_data *td; struct hid_report *report; - td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL); + td = kzalloc(sizeof(struct egalax_data), GFP_KERNEL); if (!td) { dev_err(&hdev->dev, "cannot allocate eGalax data\n"); return -ENOMEM; -- cgit v1.2.3-70-g09d2 From e658e9fe65306346e827676a121eca3534ad75ff Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 9 Nov 2010 09:12:42 -0800 Subject: driver core: the development tree has switched to git So change the MAINTAINERS file to show where the tree now is at. Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0094224ca79..283d5f54ddc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2051,7 +2051,7 @@ F: Documentation/blockdev/drbd/ DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS M: Greg Kroah-Hartman -T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git S: Supported F: Documentation/kobject.txt F: drivers/base/ -- cgit v1.2.3-70-g09d2 From ebe2e91e000c59aed0300d81815f451c85e0bda6 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 10 Nov 2010 10:19:10 -0500 Subject: cifs: fix potential use-after-free in cifs_oplock_break_put cfile may very well be freed after the cifsFileInfo_put. Make sure we have a valid pointer to the superblock for cifs_sb_deactive. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/file.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 06c3e83fa38..b857ce5db77 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -2271,8 +2271,10 @@ void cifs_oplock_break_get(struct cifsFileInfo *cfile) void cifs_oplock_break_put(struct cifsFileInfo *cfile) { + struct super_block *sb = cfile->dentry->d_sb; + cifsFileInfo_put(cfile); - cifs_sb_deactive(cfile->dentry->d_sb); + cifs_sb_deactive(sb); } const struct address_space_operations cifs_addr_ops = { -- cgit v1.2.3-70-g09d2 From b17cd8d69a75f921d9d444cc3ac9b5b1d0b66ca0 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Sun, 7 Nov 2010 01:28:24 -0500 Subject: driver core: prune docs about device_interface drivers/base/intf.c was removed before the beginning of (git) time but its Documentation stuck around. Remove it. Signed-off-by: Brandon Philips Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-model/interface.txt | 129 ------------------------------- include/linux/cpu.h | 5 -- include/linux/node.h | 5 -- 3 files changed, 139 deletions(-) delete mode 100644 Documentation/driver-model/interface.txt diff --git a/Documentation/driver-model/interface.txt b/Documentation/driver-model/interface.txt deleted file mode 100644 index c66912bfe86..00000000000 --- a/Documentation/driver-model/interface.txt +++ /dev/null @@ -1,129 +0,0 @@ - -Device Interfaces - -Introduction -~~~~~~~~~~~~ - -Device interfaces are the logical interfaces of device classes that correlate -directly to userspace interfaces, like device nodes. - -Each device class may have multiple interfaces through which you can -access the same device. An input device may support the mouse interface, -the 'evdev' interface, and the touchscreen interface. A SCSI disk would -support the disk interface, the SCSI generic interface, and possibly a raw -device interface. - -Device interfaces are registered with the class they belong to. As devices -are added to the class, they are added to each interface registered with -the class. The interface is responsible for determining whether the device -supports the interface or not. - - -Programming Interface -~~~~~~~~~~~~~~~~~~~~~ - -struct device_interface { - char * name; - rwlock_t lock; - u32 devnum; - struct device_class * devclass; - - struct list_head node; - struct driver_dir_entry dir; - - int (*add_device)(struct device *); - int (*add_device)(struct intf_data *); -}; - -int interface_register(struct device_interface *); -void interface_unregister(struct device_interface *); - - -An interface must specify the device class it belongs to. It is added -to that class's list of interfaces on registration. - - -Interfaces can be added to a device class at any time. Whenever it is -added, each device in the class is passed to the interface's -add_device callback. When an interface is removed, each device is -removed from the interface. - - -Devices -~~~~~~~ -Once a device is added to a device class, it is added to each -interface that is registered with the device class. The class -is expected to place a class-specific data structure in -struct device::class_data. The interface can use that (along with -other fields of struct device) to determine whether or not the driver -and/or device support that particular interface. - - -Data -~~~~ - -struct intf_data { - struct list_head node; - struct device_interface * intf; - struct device * dev; - u32 intf_num; -}; - -int interface_add_data(struct interface_data *); - -The interface is responsible for allocating and initializing a struct -intf_data and calling interface_add_data() to add it to the device's list -of interfaces it belongs to. This list will be iterated over when the device -is removed from the class (instead of all possible interfaces for a class). -This structure should probably be embedded in whatever per-device data -structure the interface is allocating anyway. - -Devices are enumerated within the interface. This happens in interface_add_data() -and the enumerated value is stored in the struct intf_data for that device. - -sysfs -~~~~~ -Each interface is given a directory in the directory of the device -class it belongs to: - -Interfaces get a directory in the class's directory as well: - - class/ - `-- input - |-- devices - |-- drivers - |-- mouse - `-- evdev - -When a device is added to the interface, a symlink is created that points -to the device's directory in the physical hierarchy: - - class/ - `-- input - |-- devices - | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/ - |-- drivers - | `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/ - |-- mouse - | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/ - `-- evdev - `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/ - - -Future Plans -~~~~~~~~~~~~ -A device interface is correlated directly with a userspace interface -for a device, specifically a device node. For instance, a SCSI disk -exposes at least two interfaces to userspace: the standard SCSI disk -interface and the SCSI generic interface. It might also export a raw -device interface. - -Many interfaces have a major number associated with them and each -device gets a minor number. Or, multiple interfaces might share one -major number, and each will receive a range of minor numbers (like in -the case of input devices). - -These major and minor numbers could be stored in the interface -structure. Major and minor allocations could happen when the interface -is registered with the class, or via a helper function. - diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 4823af64e9d..5f09323ee88 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -10,11 +10,6 @@ * * CPUs are exported via sysfs in the class/cpu/devices/ * directory. - * - * Per-cpu interfaces can be implemented using a struct device_interface. - * See the following for how to do this: - * - drivers/base/intf.c - * - Documentation/driver-model/interface.txt */ #ifndef _LINUX_CPU_H_ #define _LINUX_CPU_H_ diff --git a/include/linux/node.h b/include/linux/node.h index 06292dac3ea..1466945cc9e 100644 --- a/include/linux/node.h +++ b/include/linux/node.h @@ -10,11 +10,6 @@ * * Nodes are exported via driverfs in the class/node/devices/ * directory. - * - * Per-node interfaces can be implemented using a struct device_interface. - * See the following for how to do this: - * - drivers/base/intf.c - * - Documentation/driver-model/interface.txt */ #ifndef _LINUX_NODE_H_ #define _LINUX_NODE_H_ -- cgit v1.2.3-70-g09d2 From 318af55ddd38bdaaa2b57f5c3bd394f3ce3a2610 Mon Sep 17 00:00:00 2001 From: "Hans J. Koch" Date: Sat, 30 Oct 2010 00:36:47 +0200 Subject: uio: Change mail address of Hans J. Koch My old mail address doesn't exist anymore. This changes all occurrences to my new address. Signed-off-by: Hans J. Koch Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 2 +- drivers/uio/uio_cif.c | 2 +- drivers/uio/uio_netx.c | 2 +- include/linux/uio_driver.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index a858d2b87b9..51fe1795d5a 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -3,7 +3,7 @@ * * Copyright(C) 2005, Benedikt Spranger * Copyright(C) 2005, Thomas Gleixner - * Copyright(C) 2006, Hans J. Koch + * Copyright(C) 2006, Hans J. Koch * Copyright(C) 2006, Greg Kroah-Hartman * * Userspace IO diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c index a8ea2f19a0c..a84a451159e 100644 --- a/drivers/uio/uio_cif.c +++ b/drivers/uio/uio_cif.c @@ -1,7 +1,7 @@ /* * UIO Hilscher CIF card driver * - * (C) 2007 Hans J. Koch + * (C) 2007 Hans J. Koch * Original code (C) 2005 Benedikt Spranger * * Licensed under GPL version 2 only. diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c index 5a18e9f7b83..5ffdb483b01 100644 --- a/drivers/uio/uio_netx.c +++ b/drivers/uio/uio_netx.c @@ -2,7 +2,7 @@ * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX). * See http://www.hilscher.com for details. * - * (C) 2007 Hans J. Koch + * (C) 2007 Hans J. Koch * (C) 2008 Manuel Traut * * Licensed under GPL version 2 only. diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h index d6188e5a52d..665517c05ea 100644 --- a/include/linux/uio_driver.h +++ b/include/linux/uio_driver.h @@ -3,7 +3,7 @@ * * Copyright(C) 2005, Benedikt Spranger * Copyright(C) 2005, Thomas Gleixner - * Copyright(C) 2006, Hans J. Koch + * Copyright(C) 2006, Hans J. Koch * Copyright(C) 2006, Greg Kroah-Hartman * * Userspace IO driver. -- cgit v1.2.3-70-g09d2 From a7851ce73b9fdef53f251420e6883cf4f3766534 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Wed, 10 Nov 2010 21:06:13 +0000 Subject: cifs: fix another memleak, in cifs_root_iget cifs_root_iget allocates full_path through cifs_build_path_to_root, but fails to kfree it upon cifs_get_inode_info* failure. Make all failure exit paths traverse clean up handling at the end of the function. Signed-off-by: Oskar Schirmer Reviewed-by: Jesper Juhl Cc: stable@kernel.org Signed-off-by: Steve French --- fs/cifs/inode.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index ef3a55bf86b..ff7d2995d25 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -881,8 +881,10 @@ struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino) rc = cifs_get_inode_info(&inode, full_path, NULL, sb, xid, NULL); - if (!inode) - return ERR_PTR(rc); + if (!inode) { + inode = ERR_PTR(rc); + goto out; + } #ifdef CONFIG_CIFS_FSCACHE /* populate tcon->resource_id */ @@ -898,13 +900,11 @@ struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino) inode->i_uid = cifs_sb->mnt_uid; inode->i_gid = cifs_sb->mnt_gid; } else if (rc) { - kfree(full_path); - _FreeXid(xid); iget_failed(inode); - return ERR_PTR(rc); + inode = ERR_PTR(rc); } - +out: kfree(full_path); /* can not call macro FreeXid here since in a void func * TODO: This is no longer true -- cgit v1.2.3-70-g09d2 From 987b21d7d91d0335e164a41a312174851c58f333 Mon Sep 17 00:00:00 2001 From: Shirish Pargaonkar Date: Wed, 10 Nov 2010 07:50:35 -0600 Subject: cifs: Percolate error up to the caller during get/set acls [try #4] Modify get/set_cifs_acl* calls to reutrn error code and percolate the error code up to the caller. Signed-off-by: Shirish Pargaonkar Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsacl.c | 44 ++++++++++++++++++++++++++------------------ fs/cifs/cifsproto.h | 2 +- 2 files changed, 27 insertions(+), 19 deletions(-) diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index c9b4792ae82..91992abc214 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -560,7 +560,7 @@ static struct cifs_ntsd *get_cifs_acl_by_fid(struct cifs_sb_info *cifs_sb, struct tcon_link *tlink = cifs_sb_tlink(cifs_sb); if (IS_ERR(tlink)) - return NULL; + return ERR_CAST(tlink); xid = GetXid(); rc = CIFSSMBGetCIFSACL(xid, tlink_tcon(tlink), fid, &pntsd, pacllen); @@ -568,7 +568,9 @@ static struct cifs_ntsd *get_cifs_acl_by_fid(struct cifs_sb_info *cifs_sb, cifs_put_tlink(tlink); - cFYI(1, "GetCIFSACL rc = %d ACL len %d", rc, *pacllen); + cFYI(1, "%s: rc = %d ACL len %d", __func__, rc, *pacllen); + if (rc) + return ERR_PTR(rc); return pntsd; } @@ -583,7 +585,7 @@ static struct cifs_ntsd *get_cifs_acl_by_path(struct cifs_sb_info *cifs_sb, struct tcon_link *tlink = cifs_sb_tlink(cifs_sb); if (IS_ERR(tlink)) - return NULL; + return ERR_CAST(tlink); tcon = tlink_tcon(tlink); xid = GetXid(); @@ -591,18 +593,17 @@ static struct cifs_ntsd *get_cifs_acl_by_path(struct cifs_sb_info *cifs_sb, rc = CIFSSMBOpen(xid, tcon, path, FILE_OPEN, READ_CONTROL, 0, &fid, &oplock, NULL, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); - if (rc) { - cERROR(1, "Unable to open file to get ACL"); - goto out; + if (!rc) { + rc = CIFSSMBGetCIFSACL(xid, tcon, fid, &pntsd, pacllen); + CIFSSMBClose(xid, tcon, fid); } - rc = CIFSSMBGetCIFSACL(xid, tcon, fid, &pntsd, pacllen); - cFYI(1, "GetCIFSACL rc = %d ACL len %d", rc, *pacllen); - - CIFSSMBClose(xid, tcon, fid); - out: cifs_put_tlink(tlink); FreeXid(xid); + + cFYI(1, "%s: rc = %d ACL len %d", __func__, rc, *pacllen); + if (rc) + return ERR_PTR(rc); return pntsd; } @@ -695,7 +696,7 @@ static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen, } /* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */ -void +int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr, struct inode *inode, const char *path, const __u16 *pfid) { @@ -711,13 +712,17 @@ cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr, pntsd = get_cifs_acl(cifs_sb, inode, path, &acllen); /* if we can retrieve the ACL, now parse Access Control Entries, ACEs */ - if (pntsd) + if (IS_ERR(pntsd)) { + rc = PTR_ERR(pntsd); + cERROR(1, "%s: error %d getting sec desc", __func__, rc); + } else { rc = parse_sec_desc(pntsd, acllen, fattr); - if (rc) - cFYI(1, "parse sec desc failed rc = %d", rc); + kfree(pntsd); + if (rc) + cERROR(1, "parse sec desc failed rc = %d", rc); + } - kfree(pntsd); - return; + return rc; } /* Convert mode bits to an ACL so we can update the ACL on the server */ @@ -736,7 +741,10 @@ int mode_to_acl(struct inode *inode, const char *path, __u64 nmode) /* Add three ACEs for owner, group, everyone getting rid of other ACEs as chmod disables ACEs and set the security descriptor */ - if (pntsd) { + if (IS_ERR(pntsd)) { + rc = PTR_ERR(pntsd); + cERROR(1, "%s: error %d getting sec desc", __func__, rc); + } else { /* allocate memory for the smb header, set security descriptor request security descriptor parameters, and secuirty descriptor itself */ diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 7ed69b6b5fe..6ed59af4520 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -130,7 +130,7 @@ extern int cifs_get_file_info_unix(struct file *filp); extern int cifs_get_inode_info_unix(struct inode **pinode, const unsigned char *search_path, struct super_block *sb, int xid); -extern void cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, +extern int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr, struct inode *inode, const char *path, const __u16 *pfid); extern int mode_to_acl(struct inode *inode, const char *path, __u64); -- cgit v1.2.3-70-g09d2 From 59c55ba1fba61ae13fbfff094a674e73407201f1 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 12 Nov 2010 06:30:29 -0500 Subject: cifs: don't take extra tlink reference in initiate_cifs_search It's possible for initiate_cifs_search to be called on a filp that already has private_data attached. If this happens, we'll end up calling cifs_sb_tlink, taking an extra reference to the tlink and attaching that to the cifsFileInfo. This leads to refcount leaks that manifest as a "stuck" cifsd at umount time. Fix this by only looking up the tlink for the cifsFile on the filp's first pass through this function. When called on a filp that already has cifsFileInfo associated with it, just use the tlink reference that it already owns. This patch fixes samba.org bug 7792: https://bugzilla.samba.org/show_bug.cgi?id=7792 Signed-off-by: Jeff Layton Reviewed-and-Tested-by: Suresh Jayaraman Signed-off-by: Steve French --- fs/cifs/readdir.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index ef7bb7b50f5..32d300e8f20 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -226,26 +226,29 @@ static int initiate_cifs_search(const int xid, struct file *file) char *full_path = NULL; struct cifsFileInfo *cifsFile; struct cifs_sb_info *cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); - struct tcon_link *tlink; + struct tcon_link *tlink = NULL; struct cifsTconInfo *pTcon; - tlink = cifs_sb_tlink(cifs_sb); - if (IS_ERR(tlink)) - return PTR_ERR(tlink); - pTcon = tlink_tcon(tlink); - - if (file->private_data == NULL) - file->private_data = - kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL); if (file->private_data == NULL) { - rc = -ENOMEM; - goto error_exit; + tlink = cifs_sb_tlink(cifs_sb); + if (IS_ERR(tlink)) + return PTR_ERR(tlink); + + cifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL); + if (cifsFile == NULL) { + rc = -ENOMEM; + goto error_exit; + } + file->private_data = cifsFile; + cifsFile->tlink = cifs_get_tlink(tlink); + pTcon = tlink_tcon(tlink); + } else { + cifsFile = file->private_data; + pTcon = tlink_tcon(cifsFile->tlink); } - cifsFile = file->private_data; cifsFile->invalidHandle = true; cifsFile->srch_inf.endOfSearch = false; - cifsFile->tlink = cifs_get_tlink(tlink); full_path = build_path_from_dentry(file->f_path.dentry); if (full_path == NULL) { -- cgit v1.2.3-70-g09d2 From 362d31297fafb150676f4d564ecc7f7f3e3b7fd4 Mon Sep 17 00:00:00 2001 From: Steve French Date: Sun, 14 Nov 2010 03:34:30 +0000 Subject: [CIFS] fs/cifs/Kconfig: CIFS depends on CRYPTO_HMAC linux-2.6.37-rc1: I compiled a kernel with CIFS which subsequently failed with an error indicating it couldn't initialize crypto module "hmacmd5". CONFIG_CRYPTO_HMAC=y fixed the problem. This patch makes CIFS depend on CRYPTO_HMAC in kconfig. Signed-off-by: Jody Bruchon CC: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig index 0ed213970ce..3bdbfb026b6 100644 --- a/fs/cifs/Kconfig +++ b/fs/cifs/Kconfig @@ -4,6 +4,7 @@ config CIFS select NLS select CRYPTO select CRYPTO_MD5 + select CRYPTO_HMAC select CRYPTO_ARC4 help This is the client VFS module for the Common Internet File System -- cgit v1.2.3-70-g09d2 From 590b0b9754bd8928926bae7194b6da7ead9bda3b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Nov 2010 11:17:01 -0800 Subject: Staging: asus_oled: fix up some sysfs attribute permissions They should not be writable by any user Reported-by: Linus Torvalds Cc: Jakub Schmidtke Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/asus_oled/asus_oled.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index 8c95d8c2a4f..555157ff9a4 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c @@ -620,13 +620,13 @@ static ssize_t class_set_picture(struct device *device, #define ASUS_OLED_DEVICE_ATTR(_file) dev_attr_asus_oled_##_file -static DEVICE_ATTR(asus_oled_enabled, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(asus_oled_enabled, S_IRUSR | S_IRUGO, get_enabled, set_enabled); -static DEVICE_ATTR(asus_oled_picture, S_IWUGO , NULL, set_picture); +static DEVICE_ATTR(asus_oled_picture, S_IRUSR , NULL, set_picture); -static DEVICE_ATTR(enabled, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(enabled, S_IRUSR | S_IRUGO, class_get_enabled, class_set_enabled); -static DEVICE_ATTR(picture, S_IWUGO, NULL, class_set_picture); +static DEVICE_ATTR(picture, S_IRUSR, NULL, class_set_picture); static int asus_oled_probe(struct usb_interface *interface, const struct usb_device_id *id) -- cgit v1.2.3-70-g09d2 From 3bad28ec006ad6ab2bca4e5103860b75391e3c9d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Nov 2010 11:18:33 -0800 Subject: Staging: frontier: fix up some sysfs attribute permissions They should not be writable by any user Reported-by: Linus Torvalds Cc: David Taht Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/frontier/tranzport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c index a145a15cfdb..1611a27e9b7 100644 --- a/drivers/staging/frontier/tranzport.c +++ b/drivers/staging/frontier/tranzport.c @@ -204,7 +204,7 @@ static void usb_tranzport_abort_transfers(struct usb_tranzport *dev) t->value = temp; \ return count; \ } \ - static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value); + static DEVICE_ATTR(value, S_IRUSR | S_IRUGO, show_##value, set_##value); show_int(enable); show_int(offline); -- cgit v1.2.3-70-g09d2 From 1d904e8950c86e670ace237eaea1d48cd81e94df Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Nov 2010 11:19:53 -0800 Subject: Staging: iio: adis16220: fix up some sysfs attribute permissions They should not be writable by any user Reported-by: Linus Torvalds Cc: Jonathan Cameron Cc: Barry Song Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/accel/adis16220_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c index c86d1498737..c2b20913937 100644 --- a/drivers/staging/iio/accel/adis16220_core.c +++ b/drivers/staging/iio/accel/adis16220_core.c @@ -507,7 +507,7 @@ static IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, adis16220_write_reset, 0); #define IIO_DEV_ATTR_CAPTURE(_store) \ - IIO_DEVICE_ATTR(capture, S_IWUGO, NULL, _store, 0) + IIO_DEVICE_ATTR(capture, S_IRUSR, NULL, _store, 0) static IIO_DEV_ATTR_CAPTURE(adis16220_write_capture); -- cgit v1.2.3-70-g09d2 From 90c05b97fdec8d2196e420d98f774bab731af7aa Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Nov 2010 11:21:03 -0800 Subject: Staging: samsung-laptop: fix up some sysfs attribute permissions They should not be writable by any user Reported-by: Linus Torvalds Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/samsung-laptop/samsung-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/samsung-laptop/samsung-laptop.c b/drivers/staging/samsung-laptop/samsung-laptop.c index eb44b60e1eb..28700b49827 100644 --- a/drivers/staging/samsung-laptop/samsung-laptop.c +++ b/drivers/staging/samsung-laptop/samsung-laptop.c @@ -356,7 +356,7 @@ static ssize_t set_silent_state(struct device *dev, } return count; } -static DEVICE_ATTR(silent, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(silent, S_IRUSR | S_IRUGO, get_silent_state, set_silent_state); -- cgit v1.2.3-70-g09d2 From cc9ca9dfddda46b1802d325891a69d7efdbe1f1e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Nov 2010 11:21:36 -0800 Subject: Staging: udlfb: fix up some sysfs attribute permissions They should not be writable by any user Reported-by: Linus Torvalds Cc: Bernie Thompson Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/udlfb/udlfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c index fed25105970..0e0bc0b23d4 100644 --- a/drivers/staging/udlfb/udlfb.c +++ b/drivers/staging/udlfb/udlfb.c @@ -1441,7 +1441,7 @@ static struct device_attribute fb_device_attrs[] = { __ATTR_RO(metrics_bytes_identical), __ATTR_RO(metrics_bytes_sent), __ATTR_RO(metrics_cpu_kcycles_used), - __ATTR(metrics_reset, S_IWUGO, NULL, metrics_reset_store), + __ATTR(metrics_reset, S_IRUSR, NULL, metrics_reset_store), }; /* -- cgit v1.2.3-70-g09d2 From 0281b490dd7b96990724f4a15842c55657699aed Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Nov 2010 11:22:43 -0800 Subject: Staging: zram: fix up some sysfs attribute permissions They should not be writable by any user Reported-by: Linus Torvalds Cc: Nitin Gupta Cc: Pekka Enberg Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zram/zram_sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/zram/zram_sysfs.c b/drivers/staging/zram/zram_sysfs.c index 6c574a994d1..c9b52b941d6 100644 --- a/drivers/staging/zram/zram_sysfs.c +++ b/drivers/staging/zram/zram_sysfs.c @@ -189,10 +189,10 @@ static ssize_t mem_used_total_show(struct device *dev, return sprintf(buf, "%llu\n", val); } -static DEVICE_ATTR(disksize, S_IRUGO | S_IWUGO, +static DEVICE_ATTR(disksize, S_IRUGO | S_IRUSR, disksize_show, disksize_store); static DEVICE_ATTR(initstate, S_IRUGO, initstate_show, NULL); -static DEVICE_ATTR(reset, S_IWUGO, NULL, reset_store); +static DEVICE_ATTR(reset, S_IRUSR, NULL, reset_store); static DEVICE_ATTR(num_reads, S_IRUGO, num_reads_show, NULL); static DEVICE_ATTR(num_writes, S_IRUGO, num_writes_show, NULL); static DEVICE_ATTR(invalid_io, S_IRUGO, invalid_io_show, NULL); -- cgit v1.2.3-70-g09d2 From 2018845b6a169f75341f8e68ad1089cb6697cf24 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Nov 2010 11:23:33 -0800 Subject: Staging: line6: fix up some sysfs attribute permissions They should not be writable by any user Reported-by: Linus Torvalds Cc: Markus Grabner Cc: Mariusz Kozlowski Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/line6/control.c | 204 +++++++++++++++++++-------------------- drivers/staging/line6/midi.c | 4 +- drivers/staging/line6/pcm.c | 4 +- drivers/staging/line6/pod.c | 32 +++--- drivers/staging/line6/toneport.c | 4 +- drivers/staging/line6/variax.c | 12 +-- 6 files changed, 130 insertions(+), 130 deletions(-) diff --git a/drivers/staging/line6/control.c b/drivers/staging/line6/control.c index 040e25ca6d3..95910ff4505 100644 --- a/drivers/staging/line6/control.c +++ b/drivers/staging/line6/control.c @@ -266,210 +266,210 @@ VARIAX_PARAM_R(float, mix2); VARIAX_PARAM_R(float, mix1); VARIAX_PARAM_R(int, pickup_wiring); -static DEVICE_ATTR(tweak, S_IWUGO | S_IRUGO, pod_get_tweak, pod_set_tweak); -static DEVICE_ATTR(wah_position, S_IWUGO | S_IRUGO, pod_get_wah_position, +static DEVICE_ATTR(tweak, S_IRUSR | S_IRUGO, pod_get_tweak, pod_set_tweak); +static DEVICE_ATTR(wah_position, S_IRUSR | S_IRUGO, pod_get_wah_position, pod_set_wah_position); -static DEVICE_ATTR(compression_gain, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(compression_gain, S_IRUSR | S_IRUGO, pod_get_compression_gain, pod_set_compression_gain); -static DEVICE_ATTR(vol_pedal_position, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(vol_pedal_position, S_IRUSR | S_IRUGO, pod_get_vol_pedal_position, pod_set_vol_pedal_position); -static DEVICE_ATTR(compression_threshold, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(compression_threshold, S_IRUSR | S_IRUGO, pod_get_compression_threshold, pod_set_compression_threshold); -static DEVICE_ATTR(pan, S_IWUGO | S_IRUGO, pod_get_pan, pod_set_pan); -static DEVICE_ATTR(amp_model_setup, S_IWUGO | S_IRUGO, pod_get_amp_model_setup, +static DEVICE_ATTR(pan, S_IRUSR | S_IRUGO, pod_get_pan, pod_set_pan); +static DEVICE_ATTR(amp_model_setup, S_IRUSR | S_IRUGO, pod_get_amp_model_setup, pod_set_amp_model_setup); -static DEVICE_ATTR(amp_model, S_IWUGO | S_IRUGO, pod_get_amp_model, +static DEVICE_ATTR(amp_model, S_IRUSR | S_IRUGO, pod_get_amp_model, pod_set_amp_model); -static DEVICE_ATTR(drive, S_IWUGO | S_IRUGO, pod_get_drive, pod_set_drive); -static DEVICE_ATTR(bass, S_IWUGO | S_IRUGO, pod_get_bass, pod_set_bass); -static DEVICE_ATTR(mid, S_IWUGO | S_IRUGO, pod_get_mid, pod_set_mid); -static DEVICE_ATTR(lowmid, S_IWUGO | S_IRUGO, pod_get_lowmid, pod_set_lowmid); -static DEVICE_ATTR(treble, S_IWUGO | S_IRUGO, pod_get_treble, pod_set_treble); -static DEVICE_ATTR(highmid, S_IWUGO | S_IRUGO, pod_get_highmid, +static DEVICE_ATTR(drive, S_IRUSR | S_IRUGO, pod_get_drive, pod_set_drive); +static DEVICE_ATTR(bass, S_IRUSR | S_IRUGO, pod_get_bass, pod_set_bass); +static DEVICE_ATTR(mid, S_IRUSR | S_IRUGO, pod_get_mid, pod_set_mid); +static DEVICE_ATTR(lowmid, S_IRUSR | S_IRUGO, pod_get_lowmid, pod_set_lowmid); +static DEVICE_ATTR(treble, S_IRUSR | S_IRUGO, pod_get_treble, pod_set_treble); +static DEVICE_ATTR(highmid, S_IRUSR | S_IRUGO, pod_get_highmid, pod_set_highmid); -static DEVICE_ATTR(chan_vol, S_IWUGO | S_IRUGO, pod_get_chan_vol, +static DEVICE_ATTR(chan_vol, S_IRUSR | S_IRUGO, pod_get_chan_vol, pod_set_chan_vol); -static DEVICE_ATTR(reverb_mix, S_IWUGO | S_IRUGO, pod_get_reverb_mix, +static DEVICE_ATTR(reverb_mix, S_IRUSR | S_IRUGO, pod_get_reverb_mix, pod_set_reverb_mix); -static DEVICE_ATTR(effect_setup, S_IWUGO | S_IRUGO, pod_get_effect_setup, +static DEVICE_ATTR(effect_setup, S_IRUSR | S_IRUGO, pod_get_effect_setup, pod_set_effect_setup); -static DEVICE_ATTR(band_1_frequency, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(band_1_frequency, S_IRUSR | S_IRUGO, pod_get_band_1_frequency, pod_set_band_1_frequency); -static DEVICE_ATTR(presence, S_IWUGO | S_IRUGO, pod_get_presence, +static DEVICE_ATTR(presence, S_IRUSR | S_IRUGO, pod_get_presence, pod_set_presence); -static DEVICE_ATTR2(treble__bass, treble, S_IWUGO | S_IRUGO, +static DEVICE_ATTR2(treble__bass, treble, S_IRUSR | S_IRUGO, pod_get_treble__bass, pod_set_treble__bass); -static DEVICE_ATTR(noise_gate_enable, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(noise_gate_enable, S_IRUSR | S_IRUGO, pod_get_noise_gate_enable, pod_set_noise_gate_enable); -static DEVICE_ATTR(gate_threshold, S_IWUGO | S_IRUGO, pod_get_gate_threshold, +static DEVICE_ATTR(gate_threshold, S_IRUSR | S_IRUGO, pod_get_gate_threshold, pod_set_gate_threshold); -static DEVICE_ATTR(gate_decay_time, S_IWUGO | S_IRUGO, pod_get_gate_decay_time, +static DEVICE_ATTR(gate_decay_time, S_IRUSR | S_IRUGO, pod_get_gate_decay_time, pod_set_gate_decay_time); -static DEVICE_ATTR(stomp_enable, S_IWUGO | S_IRUGO, pod_get_stomp_enable, +static DEVICE_ATTR(stomp_enable, S_IRUSR | S_IRUGO, pod_get_stomp_enable, pod_set_stomp_enable); -static DEVICE_ATTR(comp_enable, S_IWUGO | S_IRUGO, pod_get_comp_enable, +static DEVICE_ATTR(comp_enable, S_IRUSR | S_IRUGO, pod_get_comp_enable, pod_set_comp_enable); -static DEVICE_ATTR(stomp_time, S_IWUGO | S_IRUGO, pod_get_stomp_time, +static DEVICE_ATTR(stomp_time, S_IRUSR | S_IRUGO, pod_get_stomp_time, pod_set_stomp_time); -static DEVICE_ATTR(delay_enable, S_IWUGO | S_IRUGO, pod_get_delay_enable, +static DEVICE_ATTR(delay_enable, S_IRUSR | S_IRUGO, pod_get_delay_enable, pod_set_delay_enable); -static DEVICE_ATTR(mod_param_1, S_IWUGO | S_IRUGO, pod_get_mod_param_1, +static DEVICE_ATTR(mod_param_1, S_IRUSR | S_IRUGO, pod_get_mod_param_1, pod_set_mod_param_1); -static DEVICE_ATTR(delay_param_1, S_IWUGO | S_IRUGO, pod_get_delay_param_1, +static DEVICE_ATTR(delay_param_1, S_IRUSR | S_IRUGO, pod_get_delay_param_1, pod_set_delay_param_1); -static DEVICE_ATTR(delay_param_1_note_value, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(delay_param_1_note_value, S_IRUSR | S_IRUGO, pod_get_delay_param_1_note_value, pod_set_delay_param_1_note_value); -static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUGO | S_IRUGO, +static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IRUSR | S_IRUGO, pod_get_band_2_frequency__bass, pod_set_band_2_frequency__bass); -static DEVICE_ATTR(delay_param_2, S_IWUGO | S_IRUGO, pod_get_delay_param_2, +static DEVICE_ATTR(delay_param_2, S_IRUSR | S_IRUGO, pod_get_delay_param_2, pod_set_delay_param_2); -static DEVICE_ATTR(delay_volume_mix, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(delay_volume_mix, S_IRUSR | S_IRUGO, pod_get_delay_volume_mix, pod_set_delay_volume_mix); -static DEVICE_ATTR(delay_param_3, S_IWUGO | S_IRUGO, pod_get_delay_param_3, +static DEVICE_ATTR(delay_param_3, S_IRUSR | S_IRUGO, pod_get_delay_param_3, pod_set_delay_param_3); -static DEVICE_ATTR(reverb_enable, S_IWUGO | S_IRUGO, pod_get_reverb_enable, +static DEVICE_ATTR(reverb_enable, S_IRUSR | S_IRUGO, pod_get_reverb_enable, pod_set_reverb_enable); -static DEVICE_ATTR(reverb_type, S_IWUGO | S_IRUGO, pod_get_reverb_type, +static DEVICE_ATTR(reverb_type, S_IRUSR | S_IRUGO, pod_get_reverb_type, pod_set_reverb_type); -static DEVICE_ATTR(reverb_decay, S_IWUGO | S_IRUGO, pod_get_reverb_decay, +static DEVICE_ATTR(reverb_decay, S_IRUSR | S_IRUGO, pod_get_reverb_decay, pod_set_reverb_decay); -static DEVICE_ATTR(reverb_tone, S_IWUGO | S_IRUGO, pod_get_reverb_tone, +static DEVICE_ATTR(reverb_tone, S_IRUSR | S_IRUGO, pod_get_reverb_tone, pod_set_reverb_tone); -static DEVICE_ATTR(reverb_pre_delay, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(reverb_pre_delay, S_IRUSR | S_IRUGO, pod_get_reverb_pre_delay, pod_set_reverb_pre_delay); -static DEVICE_ATTR(reverb_pre_post, S_IWUGO | S_IRUGO, pod_get_reverb_pre_post, +static DEVICE_ATTR(reverb_pre_post, S_IRUSR | S_IRUGO, pod_get_reverb_pre_post, pod_set_reverb_pre_post); -static DEVICE_ATTR(band_2_frequency, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(band_2_frequency, S_IRUSR | S_IRUGO, pod_get_band_2_frequency, pod_set_band_2_frequency); -static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUGO | S_IRUGO, +static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IRUSR | S_IRUGO, pod_get_band_3_frequency__bass, pod_set_band_3_frequency__bass); -static DEVICE_ATTR(wah_enable, S_IWUGO | S_IRUGO, pod_get_wah_enable, +static DEVICE_ATTR(wah_enable, S_IRUSR | S_IRUGO, pod_get_wah_enable, pod_set_wah_enable); -static DEVICE_ATTR(modulation_lo_cut, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(modulation_lo_cut, S_IRUSR | S_IRUGO, pod_get_modulation_lo_cut, pod_set_modulation_lo_cut); -static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(delay_reverb_lo_cut, S_IRUSR | S_IRUGO, pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut); -static DEVICE_ATTR(volume_pedal_minimum, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(volume_pedal_minimum, S_IRUSR | S_IRUGO, pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum); -static DEVICE_ATTR(eq_pre_post, S_IWUGO | S_IRUGO, pod_get_eq_pre_post, +static DEVICE_ATTR(eq_pre_post, S_IRUSR | S_IRUGO, pod_get_eq_pre_post, pod_set_eq_pre_post); -static DEVICE_ATTR(volume_pre_post, S_IWUGO | S_IRUGO, pod_get_volume_pre_post, +static DEVICE_ATTR(volume_pre_post, S_IRUSR | S_IRUGO, pod_get_volume_pre_post, pod_set_volume_pre_post); -static DEVICE_ATTR(di_model, S_IWUGO | S_IRUGO, pod_get_di_model, +static DEVICE_ATTR(di_model, S_IRUSR | S_IRUGO, pod_get_di_model, pod_set_di_model); -static DEVICE_ATTR(di_delay, S_IWUGO | S_IRUGO, pod_get_di_delay, +static DEVICE_ATTR(di_delay, S_IRUSR | S_IRUGO, pod_get_di_delay, pod_set_di_delay); -static DEVICE_ATTR(mod_enable, S_IWUGO | S_IRUGO, pod_get_mod_enable, +static DEVICE_ATTR(mod_enable, S_IRUSR | S_IRUGO, pod_get_mod_enable, pod_set_mod_enable); -static DEVICE_ATTR(mod_param_1_note_value, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(mod_param_1_note_value, S_IRUSR | S_IRUGO, pod_get_mod_param_1_note_value, pod_set_mod_param_1_note_value); -static DEVICE_ATTR(mod_param_2, S_IWUGO | S_IRUGO, pod_get_mod_param_2, +static DEVICE_ATTR(mod_param_2, S_IRUSR | S_IRUGO, pod_get_mod_param_2, pod_set_mod_param_2); -static DEVICE_ATTR(mod_param_3, S_IWUGO | S_IRUGO, pod_get_mod_param_3, +static DEVICE_ATTR(mod_param_3, S_IRUSR | S_IRUGO, pod_get_mod_param_3, pod_set_mod_param_3); -static DEVICE_ATTR(mod_param_4, S_IWUGO | S_IRUGO, pod_get_mod_param_4, +static DEVICE_ATTR(mod_param_4, S_IRUSR | S_IRUGO, pod_get_mod_param_4, pod_set_mod_param_4); -static DEVICE_ATTR(mod_param_5, S_IWUGO | S_IRUGO, pod_get_mod_param_5, +static DEVICE_ATTR(mod_param_5, S_IRUSR | S_IRUGO, pod_get_mod_param_5, pod_set_mod_param_5); -static DEVICE_ATTR(mod_volume_mix, S_IWUGO | S_IRUGO, pod_get_mod_volume_mix, +static DEVICE_ATTR(mod_volume_mix, S_IRUSR | S_IRUGO, pod_get_mod_volume_mix, pod_set_mod_volume_mix); -static DEVICE_ATTR(mod_pre_post, S_IWUGO | S_IRUGO, pod_get_mod_pre_post, +static DEVICE_ATTR(mod_pre_post, S_IRUSR | S_IRUGO, pod_get_mod_pre_post, pod_set_mod_pre_post); -static DEVICE_ATTR(modulation_model, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(modulation_model, S_IRUSR | S_IRUGO, pod_get_modulation_model, pod_set_modulation_model); -static DEVICE_ATTR(band_3_frequency, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(band_3_frequency, S_IRUSR | S_IRUGO, pod_get_band_3_frequency, pod_set_band_3_frequency); -static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUGO | S_IRUGO, +static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IRUSR | S_IRUGO, pod_get_band_4_frequency__bass, pod_set_band_4_frequency__bass); -static DEVICE_ATTR(mod_param_1_double_precision, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(mod_param_1_double_precision, S_IRUSR | S_IRUGO, pod_get_mod_param_1_double_precision, pod_set_mod_param_1_double_precision); -static DEVICE_ATTR(delay_param_1_double_precision, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(delay_param_1_double_precision, S_IRUSR | S_IRUGO, pod_get_delay_param_1_double_precision, pod_set_delay_param_1_double_precision); -static DEVICE_ATTR(eq_enable, S_IWUGO | S_IRUGO, pod_get_eq_enable, +static DEVICE_ATTR(eq_enable, S_IRUSR | S_IRUGO, pod_get_eq_enable, pod_set_eq_enable); -static DEVICE_ATTR(tap, S_IWUGO | S_IRUGO, pod_get_tap, pod_set_tap); -static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(tap, S_IRUSR | S_IRUGO, pod_get_tap, pod_set_tap); +static DEVICE_ATTR(volume_tweak_pedal_assign, S_IRUSR | S_IRUGO, pod_get_volume_tweak_pedal_assign, pod_set_volume_tweak_pedal_assign); -static DEVICE_ATTR(band_5_frequency, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(band_5_frequency, S_IRUSR | S_IRUGO, pod_get_band_5_frequency, pod_set_band_5_frequency); -static DEVICE_ATTR(tuner, S_IWUGO | S_IRUGO, pod_get_tuner, pod_set_tuner); -static DEVICE_ATTR(mic_selection, S_IWUGO | S_IRUGO, pod_get_mic_selection, +static DEVICE_ATTR(tuner, S_IRUSR | S_IRUGO, pod_get_tuner, pod_set_tuner); +static DEVICE_ATTR(mic_selection, S_IRUSR | S_IRUGO, pod_get_mic_selection, pod_set_mic_selection); -static DEVICE_ATTR(cabinet_model, S_IWUGO | S_IRUGO, pod_get_cabinet_model, +static DEVICE_ATTR(cabinet_model, S_IRUSR | S_IRUGO, pod_get_cabinet_model, pod_set_cabinet_model); -static DEVICE_ATTR(stomp_model, S_IWUGO | S_IRUGO, pod_get_stomp_model, +static DEVICE_ATTR(stomp_model, S_IRUSR | S_IRUGO, pod_get_stomp_model, pod_set_stomp_model); -static DEVICE_ATTR(roomlevel, S_IWUGO | S_IRUGO, pod_get_roomlevel, +static DEVICE_ATTR(roomlevel, S_IRUSR | S_IRUGO, pod_get_roomlevel, pod_set_roomlevel); -static DEVICE_ATTR(band_4_frequency, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(band_4_frequency, S_IRUSR | S_IRUGO, pod_get_band_4_frequency, pod_set_band_4_frequency); -static DEVICE_ATTR(band_6_frequency, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(band_6_frequency, S_IRUSR | S_IRUGO, pod_get_band_6_frequency, pod_set_band_6_frequency); -static DEVICE_ATTR(stomp_param_1_note_value, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(stomp_param_1_note_value, S_IRUSR | S_IRUGO, pod_get_stomp_param_1_note_value, pod_set_stomp_param_1_note_value); -static DEVICE_ATTR(stomp_param_2, S_IWUGO | S_IRUGO, pod_get_stomp_param_2, +static DEVICE_ATTR(stomp_param_2, S_IRUSR | S_IRUGO, pod_get_stomp_param_2, pod_set_stomp_param_2); -static DEVICE_ATTR(stomp_param_3, S_IWUGO | S_IRUGO, pod_get_stomp_param_3, +static DEVICE_ATTR(stomp_param_3, S_IRUSR | S_IRUGO, pod_get_stomp_param_3, pod_set_stomp_param_3); -static DEVICE_ATTR(stomp_param_4, S_IWUGO | S_IRUGO, pod_get_stomp_param_4, +static DEVICE_ATTR(stomp_param_4, S_IRUSR | S_IRUGO, pod_get_stomp_param_4, pod_set_stomp_param_4); -static DEVICE_ATTR(stomp_param_5, S_IWUGO | S_IRUGO, pod_get_stomp_param_5, +static DEVICE_ATTR(stomp_param_5, S_IRUSR | S_IRUGO, pod_get_stomp_param_5, pod_set_stomp_param_5); -static DEVICE_ATTR(stomp_param_6, S_IWUGO | S_IRUGO, pod_get_stomp_param_6, +static DEVICE_ATTR(stomp_param_6, S_IRUSR | S_IRUGO, pod_get_stomp_param_6, pod_set_stomp_param_6); -static DEVICE_ATTR(amp_switch_select, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(amp_switch_select, S_IRUSR | S_IRUGO, pod_get_amp_switch_select, pod_set_amp_switch_select); -static DEVICE_ATTR(delay_param_4, S_IWUGO | S_IRUGO, pod_get_delay_param_4, +static DEVICE_ATTR(delay_param_4, S_IRUSR | S_IRUGO, pod_get_delay_param_4, pod_set_delay_param_4); -static DEVICE_ATTR(delay_param_5, S_IWUGO | S_IRUGO, pod_get_delay_param_5, +static DEVICE_ATTR(delay_param_5, S_IRUSR | S_IRUGO, pod_get_delay_param_5, pod_set_delay_param_5); -static DEVICE_ATTR(delay_pre_post, S_IWUGO | S_IRUGO, pod_get_delay_pre_post, +static DEVICE_ATTR(delay_pre_post, S_IRUSR | S_IRUGO, pod_get_delay_pre_post, pod_set_delay_pre_post); -static DEVICE_ATTR(delay_model, S_IWUGO | S_IRUGO, pod_get_delay_model, +static DEVICE_ATTR(delay_model, S_IRUSR | S_IRUGO, pod_get_delay_model, pod_set_delay_model); -static DEVICE_ATTR(delay_verb_model, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(delay_verb_model, S_IRUSR | S_IRUGO, pod_get_delay_verb_model, pod_set_delay_verb_model); -static DEVICE_ATTR(tempo_msb, S_IWUGO | S_IRUGO, pod_get_tempo_msb, +static DEVICE_ATTR(tempo_msb, S_IRUSR | S_IRUGO, pod_get_tempo_msb, pod_set_tempo_msb); -static DEVICE_ATTR(tempo_lsb, S_IWUGO | S_IRUGO, pod_get_tempo_lsb, +static DEVICE_ATTR(tempo_lsb, S_IRUSR | S_IRUGO, pod_get_tempo_lsb, pod_set_tempo_lsb); -static DEVICE_ATTR(wah_model, S_IWUGO | S_IRUGO, pod_get_wah_model, +static DEVICE_ATTR(wah_model, S_IRUSR | S_IRUGO, pod_get_wah_model, pod_set_wah_model); -static DEVICE_ATTR(bypass_volume, S_IWUGO | S_IRUGO, pod_get_bypass_volume, +static DEVICE_ATTR(bypass_volume, S_IRUSR | S_IRUGO, pod_get_bypass_volume, pod_set_bypass_volume); -static DEVICE_ATTR(fx_loop_on_off, S_IWUGO | S_IRUGO, pod_get_fx_loop_on_off, +static DEVICE_ATTR(fx_loop_on_off, S_IRUSR | S_IRUGO, pod_get_fx_loop_on_off, pod_set_fx_loop_on_off); -static DEVICE_ATTR(tweak_param_select, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(tweak_param_select, S_IRUSR | S_IRUGO, pod_get_tweak_param_select, pod_set_tweak_param_select); -static DEVICE_ATTR(amp1_engage, S_IWUGO | S_IRUGO, pod_get_amp1_engage, +static DEVICE_ATTR(amp1_engage, S_IRUSR | S_IRUGO, pod_get_amp1_engage, pod_set_amp1_engage); -static DEVICE_ATTR(band_1_gain, S_IWUGO | S_IRUGO, pod_get_band_1_gain, +static DEVICE_ATTR(band_1_gain, S_IRUSR | S_IRUGO, pod_get_band_1_gain, pod_set_band_1_gain); -static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUGO | S_IRUGO, +static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IRUSR | S_IRUGO, pod_get_band_2_gain__bass, pod_set_band_2_gain__bass); -static DEVICE_ATTR(band_2_gain, S_IWUGO | S_IRUGO, pod_get_band_2_gain, +static DEVICE_ATTR(band_2_gain, S_IRUSR | S_IRUGO, pod_get_band_2_gain, pod_set_band_2_gain); -static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUGO | S_IRUGO, +static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IRUSR | S_IRUGO, pod_get_band_3_gain__bass, pod_set_band_3_gain__bass); -static DEVICE_ATTR(band_3_gain, S_IWUGO | S_IRUGO, pod_get_band_3_gain, +static DEVICE_ATTR(band_3_gain, S_IRUSR | S_IRUGO, pod_get_band_3_gain, pod_set_band_3_gain); -static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUGO | S_IRUGO, +static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IRUSR | S_IRUGO, pod_get_band_4_gain__bass, pod_set_band_4_gain__bass); -static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUGO | S_IRUGO, +static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IRUSR | S_IRUGO, pod_get_band_5_gain__bass, pod_set_band_5_gain__bass); -static DEVICE_ATTR(band_4_gain, S_IWUGO | S_IRUGO, pod_get_band_4_gain, +static DEVICE_ATTR(band_4_gain, S_IRUSR | S_IRUGO, pod_get_band_4_gain, pod_set_band_4_gain); -static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUGO | S_IRUGO, +static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IRUSR | S_IRUGO, pod_get_band_6_gain__bass, pod_set_band_6_gain__bass); static DEVICE_ATTR(body, S_IRUGO, variax_get_body, line6_nop_write); static DEVICE_ATTR(pickup1_enable, S_IRUGO, variax_get_pickup1_enable, diff --git a/drivers/staging/line6/midi.c b/drivers/staging/line6/midi.c index 4304dfe6c16..5388bd7226c 100644 --- a/drivers/staging/line6/midi.c +++ b/drivers/staging/line6/midi.c @@ -350,9 +350,9 @@ static ssize_t midi_set_midi_mask_receive(struct device *dev, return count; } -static DEVICE_ATTR(midi_mask_transmit, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(midi_mask_transmit, S_IRUSR | S_IRUGO, midi_get_midi_mask_transmit, midi_set_midi_mask_transmit); -static DEVICE_ATTR(midi_mask_receive, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(midi_mask_receive, S_IRUSR | S_IRUGO, midi_get_midi_mask_receive, midi_set_midi_mask_receive); /* MIDI device destructor */ diff --git a/drivers/staging/line6/pcm.c b/drivers/staging/line6/pcm.c index e54770e34d2..9b34338178d 100644 --- a/drivers/staging/line6/pcm.c +++ b/drivers/staging/line6/pcm.c @@ -79,9 +79,9 @@ static ssize_t pcm_set_impulse_period(struct device *dev, return count; } -static DEVICE_ATTR(impulse_volume, S_IWUGO | S_IRUGO, pcm_get_impulse_volume, +static DEVICE_ATTR(impulse_volume, S_IRUSR | S_IRUGO, pcm_get_impulse_volume, pcm_set_impulse_volume); -static DEVICE_ATTR(impulse_period, S_IWUGO | S_IRUGO, pcm_get_impulse_period, +static DEVICE_ATTR(impulse_period, S_IRUSR | S_IRUGO, pcm_get_impulse_period, pcm_set_impulse_period); #endif diff --git a/drivers/staging/line6/pod.c b/drivers/staging/line6/pod.c index 22e2cedcacf..ed27ac19501 100644 --- a/drivers/staging/line6/pod.c +++ b/drivers/staging/line6/pod.c @@ -1051,48 +1051,48 @@ POD_GET_SYSTEM_PARAM(tuner_pitch, 1); #undef GET_SYSTEM_PARAM /* POD special files: */ -static DEVICE_ATTR(channel, S_IWUGO | S_IRUGO, pod_get_channel, +static DEVICE_ATTR(channel, S_IRUSR | S_IRUGO, pod_get_channel, pod_set_channel); static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write); static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write); static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write); -static DEVICE_ATTR(dump, S_IWUGO | S_IRUGO, pod_get_dump, pod_set_dump); -static DEVICE_ATTR(dump_buf, S_IWUGO | S_IRUGO, pod_get_dump_buf, +static DEVICE_ATTR(dump, S_IRUSR | S_IRUGO, pod_get_dump, pod_set_dump); +static DEVICE_ATTR(dump_buf, S_IRUSR | S_IRUGO, pod_get_dump_buf, pod_set_dump_buf); -static DEVICE_ATTR(finish, S_IWUGO, line6_nop_read, pod_set_finish); +static DEVICE_ATTR(finish, S_IRUSR, line6_nop_read, pod_set_finish); static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version, line6_nop_write); -static DEVICE_ATTR(midi_postprocess, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(midi_postprocess, S_IRUSR | S_IRUGO, pod_get_midi_postprocess, pod_set_midi_postprocess); -static DEVICE_ATTR(monitor_level, S_IWUGO | S_IRUGO, pod_get_monitor_level, +static DEVICE_ATTR(monitor_level, S_IRUSR | S_IRUGO, pod_get_monitor_level, pod_set_monitor_level); static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write); static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write); -static DEVICE_ATTR(retrieve_amp_setup, S_IWUGO, line6_nop_read, +static DEVICE_ATTR(retrieve_amp_setup, S_IRUSR, line6_nop_read, pod_set_retrieve_amp_setup); -static DEVICE_ATTR(retrieve_channel, S_IWUGO, line6_nop_read, +static DEVICE_ATTR(retrieve_channel, S_IRUSR, line6_nop_read, pod_set_retrieve_channel); -static DEVICE_ATTR(retrieve_effects_setup, S_IWUGO, line6_nop_read, +static DEVICE_ATTR(retrieve_effects_setup, S_IRUSR, line6_nop_read, pod_set_retrieve_effects_setup); -static DEVICE_ATTR(routing, S_IWUGO | S_IRUGO, pod_get_routing, +static DEVICE_ATTR(routing, S_IRUSR | S_IRUGO, pod_get_routing, pod_set_routing); static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number, line6_nop_write); -static DEVICE_ATTR(store_amp_setup, S_IWUGO, line6_nop_read, +static DEVICE_ATTR(store_amp_setup, S_IRUSR, line6_nop_read, pod_set_store_amp_setup); -static DEVICE_ATTR(store_channel, S_IWUGO, line6_nop_read, +static DEVICE_ATTR(store_channel, S_IRUSR, line6_nop_read, pod_set_store_channel); -static DEVICE_ATTR(store_effects_setup, S_IWUGO, line6_nop_read, +static DEVICE_ATTR(store_effects_setup, S_IRUSR, line6_nop_read, pod_set_store_effects_setup); -static DEVICE_ATTR(tuner_freq, S_IWUGO | S_IRUGO, pod_get_tuner_freq, +static DEVICE_ATTR(tuner_freq, S_IRUSR | S_IRUGO, pod_get_tuner_freq, pod_set_tuner_freq); -static DEVICE_ATTR(tuner_mute, S_IWUGO | S_IRUGO, pod_get_tuner_mute, +static DEVICE_ATTR(tuner_mute, S_IRUSR | S_IRUGO, pod_get_tuner_mute, pod_set_tuner_mute); static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write); static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write); #ifdef CONFIG_LINE6_USB_RAW -static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw); +static DEVICE_ATTR(raw, S_IRUSR, line6_nop_read, line6_set_raw); #endif /* control info callback */ diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c index 6a10b0f9749..6bcf0366e89 100644 --- a/drivers/staging/line6/toneport.c +++ b/drivers/staging/line6/toneport.c @@ -154,9 +154,9 @@ static ssize_t toneport_set_led_green(struct device *dev, return count; } -static DEVICE_ATTR(led_red, S_IWUGO | S_IRUGO, line6_nop_read, +static DEVICE_ATTR(led_red, S_IRUSR | S_IRUGO, line6_nop_read, toneport_set_led_red); -static DEVICE_ATTR(led_green, S_IWUGO | S_IRUGO, line6_nop_read, +static DEVICE_ATTR(led_green, S_IRUSR | S_IRUGO, line6_nop_read, toneport_set_led_green); static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2) diff --git a/drivers/staging/line6/variax.c b/drivers/staging/line6/variax.c index 894eee7f231..803bc752ab8 100644 --- a/drivers/staging/line6/variax.c +++ b/drivers/staging/line6/variax.c @@ -549,21 +549,21 @@ static ssize_t variax_set_raw2(struct device *dev, #endif /* Variax workbench special files: */ -static DEVICE_ATTR(model, S_IWUGO | S_IRUGO, variax_get_model, +static DEVICE_ATTR(model, S_IRUSR | S_IRUGO, variax_get_model, variax_set_model); -static DEVICE_ATTR(volume, S_IWUGO | S_IRUGO, variax_get_volume, +static DEVICE_ATTR(volume, S_IRUSR | S_IRUGO, variax_get_volume, variax_set_volume); -static DEVICE_ATTR(tone, S_IWUGO | S_IRUGO, variax_get_tone, variax_set_tone); +static DEVICE_ATTR(tone, S_IRUSR | S_IRUGO, variax_get_tone, variax_set_tone); static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write); static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write); static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write); -static DEVICE_ATTR(active, S_IWUGO | S_IRUGO, variax_get_active, +static DEVICE_ATTR(active, S_IRUSR | S_IRUGO, variax_get_active, variax_set_active); static DEVICE_ATTR(guitar, S_IRUGO, variax_get_guitar, line6_nop_write); #ifdef CONFIG_LINE6_USB_RAW -static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw); -static DEVICE_ATTR(raw2, S_IWUGO, line6_nop_read, variax_set_raw2); +static DEVICE_ATTR(raw, S_IRUSR, line6_nop_read, line6_set_raw); +static DEVICE_ATTR(raw2, S_IRUSR, line6_nop_read, variax_set_raw2); #endif /* -- cgit v1.2.3-70-g09d2 From ce05a94efaf71d562eeefd30d6bbc2ab42b06bac Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Nov 2010 12:08:23 -0800 Subject: sparc64: Delete prom_puts() unused. Signed-off-by: David S. Miller --- arch/sparc/prom/console_64.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/arch/sparc/prom/console_64.c b/arch/sparc/prom/console_64.c index 10322dc2f55..de67fc73d91 100644 --- a/arch/sparc/prom/console_64.c +++ b/arch/sparc/prom/console_64.c @@ -81,19 +81,3 @@ prom_putchar(char c) { prom_nbputchar(c); } - -void -prom_puts(const char *s, int len) -{ - unsigned long args[7]; - - args[0] = (unsigned long) "write"; - args[1] = 3; - args[2] = 1; - args[3] = (unsigned int) prom_stdout; - args[4] = (unsigned long) s; - args[5] = len; - args[6] = (unsigned long) -1; - - p1275_cmd_direct(args); -} -- cgit v1.2.3-70-g09d2 From 17d70d6df0c4ea7a203b444001572a91ad9c2bef Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Nov 2010 12:11:15 -0800 Subject: sparc: Remove prom_pathtoinode() Unused. Signed-off-by: David S. Miller --- arch/sparc/include/asm/oplib_32.h | 1 - arch/sparc/include/asm/oplib_64.h | 1 - arch/sparc/prom/tree_32.c | 16 ---------------- arch/sparc/prom/tree_64.c | 18 ------------------ 4 files changed, 36 deletions(-) diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h index 51296a6f500..b0f79beffc3 100644 --- a/arch/sparc/include/asm/oplib_32.h +++ b/arch/sparc/include/asm/oplib_32.h @@ -238,7 +238,6 @@ extern int prom_node_has_property(phandle node, char *property); extern int prom_setprop(phandle node, const char *prop_name, char *prop_value, int value_size); -extern phandle prom_pathtoinode(char *path); extern phandle prom_inst2pkg(int); /* Dorking with Bus ranges... */ diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h index c9cc078e3e3..9b01a4b8ae1 100644 --- a/arch/sparc/include/asm/oplib_64.h +++ b/arch/sparc/include/asm/oplib_64.h @@ -279,7 +279,6 @@ extern phandle prom_finddevice(const char *name); extern int prom_setprop(phandle node, const char *prop_name, char *prop_value, int value_size); -extern phandle prom_pathtoinode(const char *path); extern phandle prom_inst2pkg(int); extern int prom_service_exists(const char *service_name); extern void prom_sun4v_guest_soft_state(void); diff --git a/arch/sparc/prom/tree_32.c b/arch/sparc/prom/tree_32.c index 63e08e14977..535e2e69ac1 100644 --- a/arch/sparc/prom/tree_32.c +++ b/arch/sparc/prom/tree_32.c @@ -342,19 +342,3 @@ phandle prom_inst2pkg(int inst) if (node == -1) return 0; return node; } - -/* Return 'node' assigned to a particular prom 'path' - * FIXME: Should work for v0 as well - */ -phandle prom_pathtoinode(char *path) -{ - phandle node; - int inst; - - inst = prom_devopen (path); - if (inst == -1) return 0; - node = prom_inst2pkg (inst); - prom_devclose (inst); - if (node == -1) return 0; - return node; -} diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c index 691be68932f..d9366004837 100644 --- a/arch/sparc/prom/tree_64.c +++ b/arch/sparc/prom/tree_64.c @@ -374,24 +374,6 @@ inline phandle prom_inst2pkg(int inst) return node; } -/* Return 'node' assigned to a particular prom 'path' - * FIXME: Should work for v0 as well - */ -phandle prom_pathtoinode(const char *path) -{ - phandle node; - int inst; - - inst = prom_devopen (path); - if (inst == 0) - return 0; - node = prom_inst2pkg(inst); - prom_devclose(inst); - if (node == -1) - return 0; - return node; -} - int prom_ihandle2path(int handle, char *buffer, int bufsize) { unsigned long args[7]; -- cgit v1.2.3-70-g09d2 From b148246912bea92bde2a0cba125ca94f1f776b12 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Nov 2010 12:23:20 -0800 Subject: sparc: Kill prom devops_{32,64}.c Completely unused. Signed-off-by: David S. Miller --- arch/sparc/include/asm/oplib_32.h | 19 --------- arch/sparc/include/asm/oplib_64.h | 21 ---------- arch/sparc/prom/Makefile | 1 - arch/sparc/prom/devops_32.c | 87 --------------------------------------- arch/sparc/prom/devops_64.c | 67 ------------------------------ 5 files changed, 195 deletions(-) delete mode 100644 arch/sparc/prom/devops_32.c delete mode 100644 arch/sparc/prom/devops_64.c diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h index b0f79beffc3..1d893fa6374 100644 --- a/arch/sparc/include/asm/oplib_32.h +++ b/arch/sparc/include/asm/oplib_32.h @@ -60,25 +60,6 @@ extern char *prom_getbootargs(void); extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes); extern void prom_unmapio(char *virt_addr, unsigned int num_bytes); -/* Device operations. */ - -/* Open the device described by the passed string. Note, that the format - * of the string is different on V0 vs. V2->higher proms. The caller must - * know what he/she is doing! Returns the device descriptor, an int. - */ -extern int prom_devopen(char *device_string); - -/* Close a previously opened device described by the passed integer - * descriptor. - */ -extern int prom_devclose(int device_handle); - -/* Do a seek operation on the device described by the passed integer - * descriptor. - */ -extern void prom_seek(int device_handle, unsigned int seek_hival, - unsigned int seek_lowval); - /* Miscellaneous routines, don't really fit in any category per se. */ /* Reboot the machine with the command line passed. */ diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h index 9b01a4b8ae1..8441d1aa31c 100644 --- a/arch/sparc/include/asm/oplib_64.h +++ b/arch/sparc/include/asm/oplib_64.h @@ -67,27 +67,6 @@ extern void prom_init(void *cif_handler, void *cif_stack); /* Boot argument acquisition, returns the boot command line string. */ extern char *prom_getbootargs(void); -/* Device utilities. */ - -/* Device operations. */ - -/* Open the device described by the passed string. Note, that the format - * of the string is different on V0 vs. V2->higher proms. The caller must - * know what he/she is doing! Returns the device descriptor, an int. - */ -extern int prom_devopen(const char *device_string); - -/* Close a previously opened device described by the passed integer - * descriptor. - */ -extern int prom_devclose(int device_handle); - -/* Do a seek operation on the device described by the passed integer - * descriptor. - */ -extern void prom_seek(int device_handle, unsigned int seek_hival, - unsigned int seek_lowval); - /* Miscellaneous routines, don't really fit in any category per se. */ /* Reboot the machine with the command line passed. */ diff --git a/arch/sparc/prom/Makefile b/arch/sparc/prom/Makefile index 1b8c073adb4..816c0fa12dc 100644 --- a/arch/sparc/prom/Makefile +++ b/arch/sparc/prom/Makefile @@ -6,7 +6,6 @@ ccflags := -Werror lib-y := bootstr_$(BITS).o lib-$(CONFIG_SPARC32) += devmap.o -lib-y += devops_$(BITS).o lib-y += init_$(BITS).o lib-$(CONFIG_SPARC32) += memory.o lib-y += misc_$(BITS).o diff --git a/arch/sparc/prom/devops_32.c b/arch/sparc/prom/devops_32.c deleted file mode 100644 index 9c5d4687242..00000000000 --- a/arch/sparc/prom/devops_32.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * devops.c: Device operations using the PROM. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ -#include -#include -#include - -#include -#include - -extern void restore_current(void); - -/* Open the device described by the string 'dstr'. Returns the handle - * to that device used for subsequent operations on that device. - * Returns -1 on failure. - */ -int -prom_devopen(char *dstr) -{ - int handle; - unsigned long flags; - spin_lock_irqsave(&prom_lock, flags); - switch(prom_vers) { - case PROM_V0: - handle = (*(romvec->pv_v0devops.v0_devopen))(dstr); - if(handle == 0) handle = -1; - break; - case PROM_V2: - case PROM_V3: - handle = (*(romvec->pv_v2devops.v2_dev_open))(dstr); - break; - default: - handle = -1; - break; - }; - restore_current(); - spin_unlock_irqrestore(&prom_lock, flags); - - return handle; -} - -/* Close the device described by device handle 'dhandle'. */ -int -prom_devclose(int dhandle) -{ - unsigned long flags; - spin_lock_irqsave(&prom_lock, flags); - switch(prom_vers) { - case PROM_V0: - (*(romvec->pv_v0devops.v0_devclose))(dhandle); - break; - case PROM_V2: - case PROM_V3: - (*(romvec->pv_v2devops.v2_dev_close))(dhandle); - break; - default: - break; - }; - restore_current(); - spin_unlock_irqrestore(&prom_lock, flags); - return 0; -} - -/* Seek to specified location described by 'seekhi' and 'seeklo' - * for device 'dhandle'. - */ -void -prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo) -{ - unsigned long flags; - spin_lock_irqsave(&prom_lock, flags); - switch(prom_vers) { - case PROM_V0: - (*(romvec->pv_v0devops.v0_seekdev))(dhandle, seekhi, seeklo); - break; - case PROM_V2: - case PROM_V3: - (*(romvec->pv_v2devops.v2_dev_seek))(dhandle, seekhi, seeklo); - break; - default: - break; - }; - restore_current(); - spin_unlock_irqrestore(&prom_lock, flags); -} diff --git a/arch/sparc/prom/devops_64.c b/arch/sparc/prom/devops_64.c deleted file mode 100644 index a017119e7ef..00000000000 --- a/arch/sparc/prom/devops_64.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * devops.c: Device operations using the PROM. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ -#include -#include -#include - -#include -#include - -/* Open the device described by the string 'dstr'. Returns the handle - * to that device used for subsequent operations on that device. - * Returns 0 on failure. - */ -int -prom_devopen(const char *dstr) -{ - unsigned long args[5]; - - args[0] = (unsigned long) "open"; - args[1] = 1; - args[2] = 1; - args[3] = (unsigned long) dstr; - args[4] = (unsigned long) -1; - - p1275_cmd_direct(args); - - return (int) args[4]; -} - -/* Close the device described by device handle 'dhandle'. */ -int -prom_devclose(int dhandle) -{ - unsigned long args[4]; - - args[0] = (unsigned long) "close"; - args[1] = 1; - args[2] = 0; - args[3] = (unsigned int) dhandle; - - p1275_cmd_direct(args); - - return 0; -} - -/* Seek to specified location described by 'seekhi' and 'seeklo' - * for device 'dhandle'. - */ -void -prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo) -{ - unsigned long args[7]; - - args[0] = (unsigned long) "seek"; - args[1] = 3; - args[2] = 1; - args[3] = (unsigned int) dhandle; - args[4] = seekhi; - args[5] = seeklo; - args[6] = (unsigned long) -1; - - p1275_cmd_direct(args); -} -- cgit v1.2.3-70-g09d2 From f7b5f55ac1623dfde24ef5319ad77c1746645f3f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Nov 2010 12:24:16 -0800 Subject: sparc64: Unexport prom_service_exists(). Only used by functions in misc_64.c so make it private to that file. Signed-off-by: David S. Miller --- arch/sparc/include/asm/oplib_64.h | 1 - arch/sparc/prom/misc_64.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h index 8441d1aa31c..daf02d31427 100644 --- a/arch/sparc/include/asm/oplib_64.h +++ b/arch/sparc/include/asm/oplib_64.h @@ -259,7 +259,6 @@ extern int prom_setprop(phandle node, const char *prop_name, char *prop_value, int value_size); extern phandle prom_inst2pkg(int); -extern int prom_service_exists(const char *service_name); extern void prom_sun4v_guest_soft_state(void); extern int prom_ihandle2path(int handle, char *buffer, int bufsize); diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c index d24bc44e361..b900fdf829a 100644 --- a/arch/sparc/prom/misc_64.c +++ b/arch/sparc/prom/misc_64.c @@ -18,7 +18,7 @@ #include #include -int prom_service_exists(const char *service_name) +static int prom_service_exists(const char *service_name) { unsigned long args[5]; -- cgit v1.2.3-70-g09d2 From 5fb5d38fc268b8285125b213b9b2ded9322a371c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 12 Nov 2010 08:08:35 +0300 Subject: Staging: speakup: free after input_unregister_device() input_unregister_device() frees the device so the call to input_free_device() is a double free. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/fakekey.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/speakup/fakekey.c b/drivers/staging/speakup/fakekey.c index adb93f21c0d..65b231178f0 100644 --- a/drivers/staging/speakup/fakekey.c +++ b/drivers/staging/speakup/fakekey.c @@ -62,7 +62,6 @@ void speakup_remove_virtual_keyboard(void) { if (virt_keyboard != NULL) { input_unregister_device(virt_keyboard); - input_free_device(virt_keyboard); virt_keyboard = NULL; } } -- cgit v1.2.3-70-g09d2 From ebba26f4a8d0c137a2d365b6bded2a0d7fcd1d06 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 12 Nov 2010 08:04:43 +0300 Subject: Staging: quickstart: free after input_unregister_device() input_unregister_device() releases "quickstart_input" so the input_free_device() is a double free. Also I noticed that there is a memory leak if the call to input_register_device() fails. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/quickstart/quickstart.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c index d746715d3d8..d83bec876d2 100644 --- a/drivers/staging/quickstart/quickstart.c +++ b/drivers/staging/quickstart/quickstart.c @@ -355,7 +355,6 @@ static int quickstart_acpi_remove(struct acpi_device *device, int type) static void quickstart_exit(void) { input_unregister_device(quickstart_input); - input_free_device(quickstart_input); device_remove_file(&pf_device->dev, &dev_attr_pressed_button); device_remove_file(&pf_device->dev, &dev_attr_buttons); @@ -375,6 +374,7 @@ static int __init quickstart_init_input(void) { struct quickstart_btn **ptr = &quickstart_data.btn_lst; int count; + int ret; quickstart_input = input_allocate_device(); @@ -391,7 +391,13 @@ static int __init quickstart_init_input(void) ptr = &((*ptr)->next); } - return input_register_device(quickstart_input); + ret = input_register_device(quickstart_input); + if (ret) { + input_free_device(quickstart_input); + return ret; + } + + return 0; } static int __init quickstart_init(void) -- cgit v1.2.3-70-g09d2 From 61838261edaf621d1e8ee4ea9d7c052f7d783ca4 Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Sat, 13 Nov 2010 19:46:50 +0100 Subject: staging: comedi: fix memory leak Instead of freeing outBuffer, inBuffer gets freed twice. Signed-off-by: Nicolas Kaiser Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbdux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 1f177a67ff1..de784ff08ca 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -2295,8 +2295,8 @@ static void tidy_up(struct usbduxsub *usbduxsub_tmp) usbduxsub_tmp->inBuffer = NULL; kfree(usbduxsub_tmp->insnBuffer); usbduxsub_tmp->insnBuffer = NULL; - kfree(usbduxsub_tmp->inBuffer); - usbduxsub_tmp->inBuffer = NULL; + kfree(usbduxsub_tmp->outBuffer); + usbduxsub_tmp->outBuffer = NULL; kfree(usbduxsub_tmp->dac_commands); usbduxsub_tmp->dac_commands = NULL; kfree(usbduxsub_tmp->dux_commands); -- cgit v1.2.3-70-g09d2 From f36d83a8cb7224f45fdfa1129a616dff56479a09 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 13 Nov 2010 13:01:56 -0600 Subject: staging: rtl8187se: Change panic to warn when RF switch turned off This driver issues a kernel panic over conditions that do not justify such drastic action. Change these to log entries with a stack dump. This patch fixes the system crash reported in https://bugs.launchpad.net/ubuntu/+source/linux/+bug/674285. Signed-off-by: Larry Finger Reported-and-Tested-by: Robie Basik Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/r8185b_init.c | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-) diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c index 46000d72f4c..3bdf9b31cc4 100644 --- a/drivers/staging/rtl8187se/r8185b_init.c +++ b/drivers/staging/rtl8187se/r8185b_init.c @@ -264,8 +264,12 @@ HwHSSIThreeWire( udelay(10); } - if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) - panic("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n", u1bTmp); + if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) { + printk(KERN_ERR "rtl8187se: HwThreeWire(): CmdReg:" + " %#X RE|WE bits are not clear!!\n", u1bTmp); + dump_stack(); + return 0; + } /* RTL8187S HSSI Read/Write Function */ u1bTmp = read_nic_byte(dev, RF_SW_CONFIG); @@ -298,13 +302,23 @@ HwHSSIThreeWire( int idx; int ByteCnt = nDataBufBitCnt / 8; /* printk("%d\n",nDataBufBitCnt); */ - if ((nDataBufBitCnt % 8) != 0) - panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n", - nDataBufBitCnt); + if ((nDataBufBitCnt % 8) != 0) { + printk(KERN_ERR "rtl8187se: " + "HwThreeWire(): nDataBufBitCnt(%d)" + " should be multiple of 8!!!\n", + nDataBufBitCnt); + dump_stack(); + nDataBufBitCnt += 8; + nDataBufBitCnt &= ~7; + } - if (nDataBufBitCnt > 64) - panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n", - nDataBufBitCnt); + if (nDataBufBitCnt > 64) { + printk(KERN_ERR "rtl8187se: HwThreeWire():" + " nDataBufBitCnt(%d) should <= 64!!!\n", + nDataBufBitCnt); + dump_stack(); + nDataBufBitCnt = 64; + } for (idx = 0; idx < ByteCnt; idx++) write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx)); -- cgit v1.2.3-70-g09d2 From 832855354b5863d141ecfc563e78063978c6f29f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 12 Nov 2010 08:11:13 +0300 Subject: Staging: rtl8712: signedness bug in init PollingCnt is 20 and that means we loop 20 times and then run the timeout code. After the end of the loop PollingCnt should be -1 but because it's an unsigned char, it's actually 255 and the timeout code never runs. Signed-off-by: Dan Carpenter Acked-by: Larry Finger Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/usb_halinit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/rtl8712/usb_halinit.c b/drivers/staging/rtl8712/usb_halinit.c index f6569dce301..0e9483bbabe 100644 --- a/drivers/staging/rtl8712/usb_halinit.c +++ b/drivers/staging/rtl8712/usb_halinit.c @@ -37,7 +37,7 @@ u8 r8712_usb_hal_bus_init(struct _adapter *padapter) { u8 val8 = 0; u8 ret = _SUCCESS; - u8 PollingCnt = 20; + int PollingCnt = 20; struct registry_priv *pregistrypriv = &padapter->registrypriv; if (pregistrypriv->chip_version == RTL8712_FPGA) { -- cgit v1.2.3-70-g09d2 From 3251627c943f1cfc5bfad7c38d4e8d85cf44c6d8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 13 Nov 2010 11:58:26 +0300 Subject: Staging: intel_sst: fix memory leak The original code set "str_info->decode_ibuf" to NULL so the kfree() is no-op. Signed-off-by: Dan Carpenter Acked-by: Harsha Priya Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/staging/intel_sst/intel_sst_stream_encoded.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/intel_sst/intel_sst_stream_encoded.c b/drivers/staging/intel_sst/intel_sst_stream_encoded.c index fbae39fda5c..5c455608b02 100644 --- a/drivers/staging/intel_sst/intel_sst_stream_encoded.c +++ b/drivers/staging/intel_sst/intel_sst_stream_encoded.c @@ -1269,7 +1269,7 @@ finish: dbufs->output_bytes_produced = total_output; str_info->status = str_info->prev; str_info->prev = STREAM_DECODE; - str_info->decode_ibuf = NULL; kfree(str_info->decode_ibuf); + str_info->decode_ibuf = NULL; return retval; } -- cgit v1.2.3-70-g09d2 From c540ee70e49b573535c7ddfd0e9a0fc9d549c8b7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Nov 2010 12:50:19 -0800 Subject: sparc64: Delete prom_setcallback(). Unused. Signed-off-by: David S. Miller --- arch/sparc/include/asm/oplib_64.h | 8 -------- arch/sparc/prom/misc_64.c | 14 -------------- 2 files changed, 22 deletions(-) diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h index daf02d31427..56985e30047 100644 --- a/arch/sparc/include/asm/oplib_64.h +++ b/arch/sparc/include/asm/oplib_64.h @@ -88,14 +88,6 @@ extern void prom_halt(void) __attribute__ ((noreturn)); /* Halt and power-off the machine. */ extern void prom_halt_power_off(void) __attribute__ ((noreturn)); -/* Set the PROM 'sync' callback function to the passed function pointer. - * When the user gives the 'sync' command at the prom prompt while the - * kernel is still active, the prom will call this routine. - * - */ -typedef int (*callback_func_t)(long *cmd); -extern void prom_setcallback(callback_func_t func_ptr); - /* Acquire the IDPROM of the root node in the prom device tree. This * gets passed a buffer where you would like it stuffed. The return value * is the format type of this idprom or 0xff on error. diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c index b900fdf829a..e4f31d4d371 100644 --- a/arch/sparc/prom/misc_64.c +++ b/arch/sparc/prom/misc_64.c @@ -150,20 +150,6 @@ void prom_halt_power_off(void) prom_halt(); } -/* Set prom sync handler to call function 'funcp'. */ -void prom_setcallback(callback_func_t funcp) -{ - unsigned long args[5]; - if (!funcp) - return; - args[0] = (unsigned long) "set-callback"; - args[1] = 1; - args[2] = 1; - args[3] = (unsigned long) funcp; - args[4] = (unsigned long) -1; - p1275_cmd_direct(args); -} - /* Get the idprom and stuff it into buffer 'idbuf'. Returns the * format type. 'num_bytes' is the number of bytes that your idbuf * has space for. Returns 0xff on error. -- cgit v1.2.3-70-g09d2 From a80c49dbb6cd389fd5b0d79f850b56322475d00b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 15 Nov 2010 21:11:12 +0100 Subject: serial8250: Mark console as CON_ANYTIME While trying to debug a cpu-hotplug issue I noticed printk() stopped working once the cpu got marked offline, since the 8250 serial console doesn't have any per-cpu resources the CON_ANYTIME bit is the safe and documented way to make it work again. Signed-off-by: Peter Zijlstra Signed-off-by: Greg Kroah-Hartman --- drivers/serial/8250.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 4d8e14b7aa9..09a550860dc 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2872,7 +2872,7 @@ static struct console serial8250_console = { .device = uart_console_device, .setup = serial8250_console_setup, .early_setup = serial8250_console_early_setup, - .flags = CON_PRINTBUFFER, + .flags = CON_PRINTBUFFER | CON_ANYTIME, .index = -1, .data = &serial8250_reg, }; -- cgit v1.2.3-70-g09d2 From 91921fef7c658b12de53376b312d071d757f7770 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 17 Nov 2010 10:22:56 -0800 Subject: sparc: Do not export prom_nb{get,put}char(). Never used outside of console_{32,64}.c Signed-off-by: David S. Miller --- arch/sparc/include/asm/oplib_32.h | 6 ------ arch/sparc/include/asm/oplib_64.h | 6 ------ arch/sparc/prom/console_32.c | 6 ++---- arch/sparc/prom/console_64.c | 6 ++---- 4 files changed, 4 insertions(+), 20 deletions(-) diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h index 1d893fa6374..49fe4266f86 100644 --- a/arch/sparc/include/asm/oplib_32.h +++ b/arch/sparc/include/asm/oplib_32.h @@ -104,12 +104,6 @@ extern int prom_getprev(void); /* Character operations to/from the console.... */ -/* Non-blocking get character from console. */ -extern int prom_nbgetchar(void); - -/* Non-blocking put character to console. */ -extern int prom_nbputchar(char character); - /* Blocking get character from console. */ extern char prom_getchar(void); diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h index 56985e30047..d541de4b684 100644 --- a/arch/sparc/include/asm/oplib_64.h +++ b/arch/sparc/include/asm/oplib_64.h @@ -96,12 +96,6 @@ extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size); /* Character operations to/from the console.... */ -/* Non-blocking get character from console. */ -extern int prom_nbgetchar(void); - -/* Non-blocking put character to console. */ -extern int prom_nbputchar(char character); - /* Blocking get character from console. */ extern char prom_getchar(void); diff --git a/arch/sparc/prom/console_32.c b/arch/sparc/prom/console_32.c index 5340264b78f..2ce5acb45f2 100644 --- a/arch/sparc/prom/console_32.c +++ b/arch/sparc/prom/console_32.c @@ -19,8 +19,7 @@ extern void restore_current(void); /* Non blocking get character from console input device, returns -1 * if no input was taken. This can be used for polling. */ -int -prom_nbgetchar(void) +static int prom_nbgetchar(void) { static char inc; int i = -1; @@ -51,8 +50,7 @@ prom_nbgetchar(void) /* Non blocking put character to console device, returns -1 if * unsuccessful. */ -int -prom_nbputchar(char c) +static int prom_nbputchar(char c) { static char outc; unsigned long flags; diff --git a/arch/sparc/prom/console_64.c b/arch/sparc/prom/console_64.c index de67fc73d91..33a8b275d6a 100644 --- a/arch/sparc/prom/console_64.c +++ b/arch/sparc/prom/console_64.c @@ -18,8 +18,7 @@ extern int prom_stdin, prom_stdout; /* Non blocking get character from console input device, returns -1 * if no input was taken. This can be used for polling. */ -inline int -prom_nbgetchar(void) +static int prom_nbgetchar(void) { unsigned long args[7]; char inc; @@ -42,8 +41,7 @@ prom_nbgetchar(void) /* Non blocking put character to console device, returns -1 if * unsuccessful. */ -inline int -prom_nbputchar(char c) +static int prom_nbputchar(char c) { unsigned long args[7]; char outc; -- cgit v1.2.3-70-g09d2 From 73e1cc4a4a02cfd2d520355de56ce1dafa11dd59 Mon Sep 17 00:00:00 2001 From: Yong Wang Date: Wed, 17 Nov 2010 21:02:13 +0800 Subject: staging: spectra: fix build error blk_queue_ordered() has been deprecated and replaced with blk_queue_flush() by Tejun. However, use of blk_queue_ordered() in spectra nand driver has not been converted yet and thus results in the following build error. drivers/staging/spectra/ffsport.c: In function SBD_setup_device: drivers/staging/spectra/ffsport.c:659: error: implicit declaration of function blk_queue_ordered drivers/staging/spectra/ffsport.c:659: error: QUEUE_ORDERED_DRAIN_FLUSH undeclared (first use in this function) drivers/staging/spectra/ffsport.c:659: error: (Each undeclared identifier is reported only once drivers/staging/spectra/ffsport.c:659: error: for each function it appears in.) Signed-off-by: Yong Wang Cc: Tejun Heo Signed-off-by: Greg Kroah-Hartman --- drivers/staging/spectra/ffsport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/spectra/ffsport.c b/drivers/staging/spectra/ffsport.c index c7932da03c5..63a9d0adf32 100644 --- a/drivers/staging/spectra/ffsport.c +++ b/drivers/staging/spectra/ffsport.c @@ -656,7 +656,7 @@ static int SBD_setup_device(struct spectra_nand_dev *dev, int which) /* Here we force report 512 byte hardware sector size to Kernel */ blk_queue_logical_block_size(dev->queue, 512); - blk_queue_ordered(dev->queue, QUEUE_ORDERED_DRAIN_FLUSH); + blk_queue_flush(dev->queue, REQ_FLUSH); dev->thread = kthread_run(spectra_trans_thread, dev, "nand_thd"); if (IS_ERR(dev->thread)) { -- cgit v1.2.3-70-g09d2 From 515b4987ccd097cdf5416530b05fdf9e01afe95a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 18 Nov 2010 11:21:04 -0800 Subject: Staging: asus_oled: fix up my fixup for some sysfs attribute permissions They should be writable by root, not readable. Doh, stupid me with the wrong flags. Reported-by: Jonathan Cameron Cc: Jakub Schmidtke Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/asus_oled/asus_oled.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index 555157ff9a4..016c6f7f863 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c @@ -620,13 +620,13 @@ static ssize_t class_set_picture(struct device *device, #define ASUS_OLED_DEVICE_ATTR(_file) dev_attr_asus_oled_##_file -static DEVICE_ATTR(asus_oled_enabled, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(asus_oled_enabled, S_IWUSR | S_IRUGO, get_enabled, set_enabled); -static DEVICE_ATTR(asus_oled_picture, S_IRUSR , NULL, set_picture); +static DEVICE_ATTR(asus_oled_picture, S_IWUSR , NULL, set_picture); -static DEVICE_ATTR(enabled, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(enabled, S_IWUSR | S_IRUGO, class_get_enabled, class_set_enabled); -static DEVICE_ATTR(picture, S_IRUSR, NULL, class_set_picture); +static DEVICE_ATTR(picture, S_IWUSR, NULL, class_set_picture); static int asus_oled_probe(struct usb_interface *interface, const struct usb_device_id *id) -- cgit v1.2.3-70-g09d2 From 2a767fda5d0d8dcff465724dfad6ee131489b3f2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 18 Nov 2010 11:21:04 -0800 Subject: Staging: frontier: fix up my fixup for some sysfs attribute permissions They should be writable by root, not readable. Doh, stupid me with the wrong flags. Reported-by: Jonathan Cameron Cc: David Taht Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/frontier/tranzport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c index 1611a27e9b7..8894ab14f16 100644 --- a/drivers/staging/frontier/tranzport.c +++ b/drivers/staging/frontier/tranzport.c @@ -204,7 +204,7 @@ static void usb_tranzport_abort_transfers(struct usb_tranzport *dev) t->value = temp; \ return count; \ } \ - static DEVICE_ATTR(value, S_IRUSR | S_IRUGO, show_##value, set_##value); + static DEVICE_ATTR(value, S_IWUSR | S_IRUGO, show_##value, set_##value); show_int(enable); show_int(offline); -- cgit v1.2.3-70-g09d2 From c9e51d9e4bee3da47623622884f4828e079a0581 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 18 Nov 2010 11:21:04 -0800 Subject: Staging: iio: adis16220: fix up my fixup for some sysfs attribute permissions They should be writable by root, not readable. Doh, stupid me with the wrong flags. Reported-by: Jonathan Cameron Acked-by: Jonathan Cameron Cc: Barry Song Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/accel/adis16220_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c index c2b20913937..1c1e98aee2d 100644 --- a/drivers/staging/iio/accel/adis16220_core.c +++ b/drivers/staging/iio/accel/adis16220_core.c @@ -507,7 +507,7 @@ static IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, adis16220_write_reset, 0); #define IIO_DEV_ATTR_CAPTURE(_store) \ - IIO_DEVICE_ATTR(capture, S_IRUSR, NULL, _store, 0) + IIO_DEVICE_ATTR(capture, S_IWUSR, NULL, _store, 0) static IIO_DEV_ATTR_CAPTURE(adis16220_write_capture); -- cgit v1.2.3-70-g09d2 From 4d7bc388b44e42a1feafa35e50eef4f24d6ca59d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 18 Nov 2010 11:21:04 -0800 Subject: Staging: samsung-laptop: fix up my fixup for some sysfs attribute permissions They should be writable by root, not readable. Doh, stupid me with the wrong flags. Reported-by: Jonathan Cameron Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/samsung-laptop/samsung-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/samsung-laptop/samsung-laptop.c b/drivers/staging/samsung-laptop/samsung-laptop.c index 28700b49827..ac2bf11e111 100644 --- a/drivers/staging/samsung-laptop/samsung-laptop.c +++ b/drivers/staging/samsung-laptop/samsung-laptop.c @@ -356,7 +356,7 @@ static ssize_t set_silent_state(struct device *dev, } return count; } -static DEVICE_ATTR(silent, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(silent, S_IWUSR | S_IRUGO, get_silent_state, set_silent_state); -- cgit v1.2.3-70-g09d2 From 926c11151e3b82e4facbf2bd2bea15f0ca0ac6f9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 18 Nov 2010 11:21:04 -0800 Subject: Staging: udlfb: fix up my fixup for some sysfs attribute permissions They should be writable by root, not readable. Doh, stupid me with the wrong flags. Reported-by: Jonathan Cameron Cc: Bernie Thompson Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/udlfb/udlfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c index 0e0bc0b23d4..b7ac1600526 100644 --- a/drivers/staging/udlfb/udlfb.c +++ b/drivers/staging/udlfb/udlfb.c @@ -1441,7 +1441,7 @@ static struct device_attribute fb_device_attrs[] = { __ATTR_RO(metrics_bytes_identical), __ATTR_RO(metrics_bytes_sent), __ATTR_RO(metrics_cpu_kcycles_used), - __ATTR(metrics_reset, S_IRUSR, NULL, metrics_reset_store), + __ATTR(metrics_reset, S_IWUSR, NULL, metrics_reset_store), }; /* -- cgit v1.2.3-70-g09d2 From a3d13107012ea614184d3c58bb7b579905d5da11 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 18 Nov 2010 11:21:04 -0800 Subject: Staging: zram: fix up my fixup for some sysfs attribute permissions They should be writable by root, not readable. Doh, stupid me with the wrong flags. Reported-by: Jonathan Cameron Cc: Nitin Gupta Cc: Pekka Enberg Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zram/zram_sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/zram/zram_sysfs.c b/drivers/staging/zram/zram_sysfs.c index c9b52b941d6..6b3cf00b0ff 100644 --- a/drivers/staging/zram/zram_sysfs.c +++ b/drivers/staging/zram/zram_sysfs.c @@ -189,10 +189,10 @@ static ssize_t mem_used_total_show(struct device *dev, return sprintf(buf, "%llu\n", val); } -static DEVICE_ATTR(disksize, S_IRUGO | S_IRUSR, +static DEVICE_ATTR(disksize, S_IRUGO | S_IWUSR, disksize_show, disksize_store); static DEVICE_ATTR(initstate, S_IRUGO, initstate_show, NULL); -static DEVICE_ATTR(reset, S_IRUSR, NULL, reset_store); +static DEVICE_ATTR(reset, S_IWUSR, NULL, reset_store); static DEVICE_ATTR(num_reads, S_IRUGO, num_reads_show, NULL); static DEVICE_ATTR(num_writes, S_IRUGO, num_writes_show, NULL); static DEVICE_ATTR(invalid_io, S_IRUGO, invalid_io_show, NULL); -- cgit v1.2.3-70-g09d2 From a3a972a053010bfd61c13cfa4ce688d4eebd9a19 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 18 Nov 2010 11:21:04 -0800 Subject: Staging: line6: fix up my fixup for some sysfs attribute permissions They should be writable by root, not readable. Doh, stupid me with the wrong flags. Reported-by: Jonathan Cameron Cc: Markus Grabner Cc: Mariusz Kozlowski Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/line6/control.c | 204 +++++++++++++++++++-------------------- drivers/staging/line6/midi.c | 4 +- drivers/staging/line6/pcm.c | 4 +- drivers/staging/line6/pod.c | 32 +++--- drivers/staging/line6/toneport.c | 4 +- drivers/staging/line6/variax.c | 12 +-- 6 files changed, 130 insertions(+), 130 deletions(-) diff --git a/drivers/staging/line6/control.c b/drivers/staging/line6/control.c index 95910ff4505..67e23b6e2d3 100644 --- a/drivers/staging/line6/control.c +++ b/drivers/staging/line6/control.c @@ -266,210 +266,210 @@ VARIAX_PARAM_R(float, mix2); VARIAX_PARAM_R(float, mix1); VARIAX_PARAM_R(int, pickup_wiring); -static DEVICE_ATTR(tweak, S_IRUSR | S_IRUGO, pod_get_tweak, pod_set_tweak); -static DEVICE_ATTR(wah_position, S_IRUSR | S_IRUGO, pod_get_wah_position, +static DEVICE_ATTR(tweak, S_IWUSR | S_IRUGO, pod_get_tweak, pod_set_tweak); +static DEVICE_ATTR(wah_position, S_IWUSR | S_IRUGO, pod_get_wah_position, pod_set_wah_position); -static DEVICE_ATTR(compression_gain, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(compression_gain, S_IWUSR | S_IRUGO, pod_get_compression_gain, pod_set_compression_gain); -static DEVICE_ATTR(vol_pedal_position, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(vol_pedal_position, S_IWUSR | S_IRUGO, pod_get_vol_pedal_position, pod_set_vol_pedal_position); -static DEVICE_ATTR(compression_threshold, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(compression_threshold, S_IWUSR | S_IRUGO, pod_get_compression_threshold, pod_set_compression_threshold); -static DEVICE_ATTR(pan, S_IRUSR | S_IRUGO, pod_get_pan, pod_set_pan); -static DEVICE_ATTR(amp_model_setup, S_IRUSR | S_IRUGO, pod_get_amp_model_setup, +static DEVICE_ATTR(pan, S_IWUSR | S_IRUGO, pod_get_pan, pod_set_pan); +static DEVICE_ATTR(amp_model_setup, S_IWUSR | S_IRUGO, pod_get_amp_model_setup, pod_set_amp_model_setup); -static DEVICE_ATTR(amp_model, S_IRUSR | S_IRUGO, pod_get_amp_model, +static DEVICE_ATTR(amp_model, S_IWUSR | S_IRUGO, pod_get_amp_model, pod_set_amp_model); -static DEVICE_ATTR(drive, S_IRUSR | S_IRUGO, pod_get_drive, pod_set_drive); -static DEVICE_ATTR(bass, S_IRUSR | S_IRUGO, pod_get_bass, pod_set_bass); -static DEVICE_ATTR(mid, S_IRUSR | S_IRUGO, pod_get_mid, pod_set_mid); -static DEVICE_ATTR(lowmid, S_IRUSR | S_IRUGO, pod_get_lowmid, pod_set_lowmid); -static DEVICE_ATTR(treble, S_IRUSR | S_IRUGO, pod_get_treble, pod_set_treble); -static DEVICE_ATTR(highmid, S_IRUSR | S_IRUGO, pod_get_highmid, +static DEVICE_ATTR(drive, S_IWUSR | S_IRUGO, pod_get_drive, pod_set_drive); +static DEVICE_ATTR(bass, S_IWUSR | S_IRUGO, pod_get_bass, pod_set_bass); +static DEVICE_ATTR(mid, S_IWUSR | S_IRUGO, pod_get_mid, pod_set_mid); +static DEVICE_ATTR(lowmid, S_IWUSR | S_IRUGO, pod_get_lowmid, pod_set_lowmid); +static DEVICE_ATTR(treble, S_IWUSR | S_IRUGO, pod_get_treble, pod_set_treble); +static DEVICE_ATTR(highmid, S_IWUSR | S_IRUGO, pod_get_highmid, pod_set_highmid); -static DEVICE_ATTR(chan_vol, S_IRUSR | S_IRUGO, pod_get_chan_vol, +static DEVICE_ATTR(chan_vol, S_IWUSR | S_IRUGO, pod_get_chan_vol, pod_set_chan_vol); -static DEVICE_ATTR(reverb_mix, S_IRUSR | S_IRUGO, pod_get_reverb_mix, +static DEVICE_ATTR(reverb_mix, S_IWUSR | S_IRUGO, pod_get_reverb_mix, pod_set_reverb_mix); -static DEVICE_ATTR(effect_setup, S_IRUSR | S_IRUGO, pod_get_effect_setup, +static DEVICE_ATTR(effect_setup, S_IWUSR | S_IRUGO, pod_get_effect_setup, pod_set_effect_setup); -static DEVICE_ATTR(band_1_frequency, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(band_1_frequency, S_IWUSR | S_IRUGO, pod_get_band_1_frequency, pod_set_band_1_frequency); -static DEVICE_ATTR(presence, S_IRUSR | S_IRUGO, pod_get_presence, +static DEVICE_ATTR(presence, S_IWUSR | S_IRUGO, pod_get_presence, pod_set_presence); -static DEVICE_ATTR2(treble__bass, treble, S_IRUSR | S_IRUGO, +static DEVICE_ATTR2(treble__bass, treble, S_IWUSR | S_IRUGO, pod_get_treble__bass, pod_set_treble__bass); -static DEVICE_ATTR(noise_gate_enable, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(noise_gate_enable, S_IWUSR | S_IRUGO, pod_get_noise_gate_enable, pod_set_noise_gate_enable); -static DEVICE_ATTR(gate_threshold, S_IRUSR | S_IRUGO, pod_get_gate_threshold, +static DEVICE_ATTR(gate_threshold, S_IWUSR | S_IRUGO, pod_get_gate_threshold, pod_set_gate_threshold); -static DEVICE_ATTR(gate_decay_time, S_IRUSR | S_IRUGO, pod_get_gate_decay_time, +static DEVICE_ATTR(gate_decay_time, S_IWUSR | S_IRUGO, pod_get_gate_decay_time, pod_set_gate_decay_time); -static DEVICE_ATTR(stomp_enable, S_IRUSR | S_IRUGO, pod_get_stomp_enable, +static DEVICE_ATTR(stomp_enable, S_IWUSR | S_IRUGO, pod_get_stomp_enable, pod_set_stomp_enable); -static DEVICE_ATTR(comp_enable, S_IRUSR | S_IRUGO, pod_get_comp_enable, +static DEVICE_ATTR(comp_enable, S_IWUSR | S_IRUGO, pod_get_comp_enable, pod_set_comp_enable); -static DEVICE_ATTR(stomp_time, S_IRUSR | S_IRUGO, pod_get_stomp_time, +static DEVICE_ATTR(stomp_time, S_IWUSR | S_IRUGO, pod_get_stomp_time, pod_set_stomp_time); -static DEVICE_ATTR(delay_enable, S_IRUSR | S_IRUGO, pod_get_delay_enable, +static DEVICE_ATTR(delay_enable, S_IWUSR | S_IRUGO, pod_get_delay_enable, pod_set_delay_enable); -static DEVICE_ATTR(mod_param_1, S_IRUSR | S_IRUGO, pod_get_mod_param_1, +static DEVICE_ATTR(mod_param_1, S_IWUSR | S_IRUGO, pod_get_mod_param_1, pod_set_mod_param_1); -static DEVICE_ATTR(delay_param_1, S_IRUSR | S_IRUGO, pod_get_delay_param_1, +static DEVICE_ATTR(delay_param_1, S_IWUSR | S_IRUGO, pod_get_delay_param_1, pod_set_delay_param_1); -static DEVICE_ATTR(delay_param_1_note_value, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(delay_param_1_note_value, S_IWUSR | S_IRUGO, pod_get_delay_param_1_note_value, pod_set_delay_param_1_note_value); -static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IRUSR | S_IRUGO, +static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUSR | S_IRUGO, pod_get_band_2_frequency__bass, pod_set_band_2_frequency__bass); -static DEVICE_ATTR(delay_param_2, S_IRUSR | S_IRUGO, pod_get_delay_param_2, +static DEVICE_ATTR(delay_param_2, S_IWUSR | S_IRUGO, pod_get_delay_param_2, pod_set_delay_param_2); -static DEVICE_ATTR(delay_volume_mix, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(delay_volume_mix, S_IWUSR | S_IRUGO, pod_get_delay_volume_mix, pod_set_delay_volume_mix); -static DEVICE_ATTR(delay_param_3, S_IRUSR | S_IRUGO, pod_get_delay_param_3, +static DEVICE_ATTR(delay_param_3, S_IWUSR | S_IRUGO, pod_get_delay_param_3, pod_set_delay_param_3); -static DEVICE_ATTR(reverb_enable, S_IRUSR | S_IRUGO, pod_get_reverb_enable, +static DEVICE_ATTR(reverb_enable, S_IWUSR | S_IRUGO, pod_get_reverb_enable, pod_set_reverb_enable); -static DEVICE_ATTR(reverb_type, S_IRUSR | S_IRUGO, pod_get_reverb_type, +static DEVICE_ATTR(reverb_type, S_IWUSR | S_IRUGO, pod_get_reverb_type, pod_set_reverb_type); -static DEVICE_ATTR(reverb_decay, S_IRUSR | S_IRUGO, pod_get_reverb_decay, +static DEVICE_ATTR(reverb_decay, S_IWUSR | S_IRUGO, pod_get_reverb_decay, pod_set_reverb_decay); -static DEVICE_ATTR(reverb_tone, S_IRUSR | S_IRUGO, pod_get_reverb_tone, +static DEVICE_ATTR(reverb_tone, S_IWUSR | S_IRUGO, pod_get_reverb_tone, pod_set_reverb_tone); -static DEVICE_ATTR(reverb_pre_delay, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(reverb_pre_delay, S_IWUSR | S_IRUGO, pod_get_reverb_pre_delay, pod_set_reverb_pre_delay); -static DEVICE_ATTR(reverb_pre_post, S_IRUSR | S_IRUGO, pod_get_reverb_pre_post, +static DEVICE_ATTR(reverb_pre_post, S_IWUSR | S_IRUGO, pod_get_reverb_pre_post, pod_set_reverb_pre_post); -static DEVICE_ATTR(band_2_frequency, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(band_2_frequency, S_IWUSR | S_IRUGO, pod_get_band_2_frequency, pod_set_band_2_frequency); -static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IRUSR | S_IRUGO, +static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUSR | S_IRUGO, pod_get_band_3_frequency__bass, pod_set_band_3_frequency__bass); -static DEVICE_ATTR(wah_enable, S_IRUSR | S_IRUGO, pod_get_wah_enable, +static DEVICE_ATTR(wah_enable, S_IWUSR | S_IRUGO, pod_get_wah_enable, pod_set_wah_enable); -static DEVICE_ATTR(modulation_lo_cut, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(modulation_lo_cut, S_IWUSR | S_IRUGO, pod_get_modulation_lo_cut, pod_set_modulation_lo_cut); -static DEVICE_ATTR(delay_reverb_lo_cut, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUSR | S_IRUGO, pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut); -static DEVICE_ATTR(volume_pedal_minimum, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(volume_pedal_minimum, S_IWUSR | S_IRUGO, pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum); -static DEVICE_ATTR(eq_pre_post, S_IRUSR | S_IRUGO, pod_get_eq_pre_post, +static DEVICE_ATTR(eq_pre_post, S_IWUSR | S_IRUGO, pod_get_eq_pre_post, pod_set_eq_pre_post); -static DEVICE_ATTR(volume_pre_post, S_IRUSR | S_IRUGO, pod_get_volume_pre_post, +static DEVICE_ATTR(volume_pre_post, S_IWUSR | S_IRUGO, pod_get_volume_pre_post, pod_set_volume_pre_post); -static DEVICE_ATTR(di_model, S_IRUSR | S_IRUGO, pod_get_di_model, +static DEVICE_ATTR(di_model, S_IWUSR | S_IRUGO, pod_get_di_model, pod_set_di_model); -static DEVICE_ATTR(di_delay, S_IRUSR | S_IRUGO, pod_get_di_delay, +static DEVICE_ATTR(di_delay, S_IWUSR | S_IRUGO, pod_get_di_delay, pod_set_di_delay); -static DEVICE_ATTR(mod_enable, S_IRUSR | S_IRUGO, pod_get_mod_enable, +static DEVICE_ATTR(mod_enable, S_IWUSR | S_IRUGO, pod_get_mod_enable, pod_set_mod_enable); -static DEVICE_ATTR(mod_param_1_note_value, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(mod_param_1_note_value, S_IWUSR | S_IRUGO, pod_get_mod_param_1_note_value, pod_set_mod_param_1_note_value); -static DEVICE_ATTR(mod_param_2, S_IRUSR | S_IRUGO, pod_get_mod_param_2, +static DEVICE_ATTR(mod_param_2, S_IWUSR | S_IRUGO, pod_get_mod_param_2, pod_set_mod_param_2); -static DEVICE_ATTR(mod_param_3, S_IRUSR | S_IRUGO, pod_get_mod_param_3, +static DEVICE_ATTR(mod_param_3, S_IWUSR | S_IRUGO, pod_get_mod_param_3, pod_set_mod_param_3); -static DEVICE_ATTR(mod_param_4, S_IRUSR | S_IRUGO, pod_get_mod_param_4, +static DEVICE_ATTR(mod_param_4, S_IWUSR | S_IRUGO, pod_get_mod_param_4, pod_set_mod_param_4); -static DEVICE_ATTR(mod_param_5, S_IRUSR | S_IRUGO, pod_get_mod_param_5, +static DEVICE_ATTR(mod_param_5, S_IWUSR | S_IRUGO, pod_get_mod_param_5, pod_set_mod_param_5); -static DEVICE_ATTR(mod_volume_mix, S_IRUSR | S_IRUGO, pod_get_mod_volume_mix, +static DEVICE_ATTR(mod_volume_mix, S_IWUSR | S_IRUGO, pod_get_mod_volume_mix, pod_set_mod_volume_mix); -static DEVICE_ATTR(mod_pre_post, S_IRUSR | S_IRUGO, pod_get_mod_pre_post, +static DEVICE_ATTR(mod_pre_post, S_IWUSR | S_IRUGO, pod_get_mod_pre_post, pod_set_mod_pre_post); -static DEVICE_ATTR(modulation_model, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(modulation_model, S_IWUSR | S_IRUGO, pod_get_modulation_model, pod_set_modulation_model); -static DEVICE_ATTR(band_3_frequency, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(band_3_frequency, S_IWUSR | S_IRUGO, pod_get_band_3_frequency, pod_set_band_3_frequency); -static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IRUSR | S_IRUGO, +static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUSR | S_IRUGO, pod_get_band_4_frequency__bass, pod_set_band_4_frequency__bass); -static DEVICE_ATTR(mod_param_1_double_precision, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(mod_param_1_double_precision, S_IWUSR | S_IRUGO, pod_get_mod_param_1_double_precision, pod_set_mod_param_1_double_precision); -static DEVICE_ATTR(delay_param_1_double_precision, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(delay_param_1_double_precision, S_IWUSR | S_IRUGO, pod_get_delay_param_1_double_precision, pod_set_delay_param_1_double_precision); -static DEVICE_ATTR(eq_enable, S_IRUSR | S_IRUGO, pod_get_eq_enable, +static DEVICE_ATTR(eq_enable, S_IWUSR | S_IRUGO, pod_get_eq_enable, pod_set_eq_enable); -static DEVICE_ATTR(tap, S_IRUSR | S_IRUGO, pod_get_tap, pod_set_tap); -static DEVICE_ATTR(volume_tweak_pedal_assign, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(tap, S_IWUSR | S_IRUGO, pod_get_tap, pod_set_tap); +static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUSR | S_IRUGO, pod_get_volume_tweak_pedal_assign, pod_set_volume_tweak_pedal_assign); -static DEVICE_ATTR(band_5_frequency, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(band_5_frequency, S_IWUSR | S_IRUGO, pod_get_band_5_frequency, pod_set_band_5_frequency); -static DEVICE_ATTR(tuner, S_IRUSR | S_IRUGO, pod_get_tuner, pod_set_tuner); -static DEVICE_ATTR(mic_selection, S_IRUSR | S_IRUGO, pod_get_mic_selection, +static DEVICE_ATTR(tuner, S_IWUSR | S_IRUGO, pod_get_tuner, pod_set_tuner); +static DEVICE_ATTR(mic_selection, S_IWUSR | S_IRUGO, pod_get_mic_selection, pod_set_mic_selection); -static DEVICE_ATTR(cabinet_model, S_IRUSR | S_IRUGO, pod_get_cabinet_model, +static DEVICE_ATTR(cabinet_model, S_IWUSR | S_IRUGO, pod_get_cabinet_model, pod_set_cabinet_model); -static DEVICE_ATTR(stomp_model, S_IRUSR | S_IRUGO, pod_get_stomp_model, +static DEVICE_ATTR(stomp_model, S_IWUSR | S_IRUGO, pod_get_stomp_model, pod_set_stomp_model); -static DEVICE_ATTR(roomlevel, S_IRUSR | S_IRUGO, pod_get_roomlevel, +static DEVICE_ATTR(roomlevel, S_IWUSR | S_IRUGO, pod_get_roomlevel, pod_set_roomlevel); -static DEVICE_ATTR(band_4_frequency, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(band_4_frequency, S_IWUSR | S_IRUGO, pod_get_band_4_frequency, pod_set_band_4_frequency); -static DEVICE_ATTR(band_6_frequency, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(band_6_frequency, S_IWUSR | S_IRUGO, pod_get_band_6_frequency, pod_set_band_6_frequency); -static DEVICE_ATTR(stomp_param_1_note_value, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(stomp_param_1_note_value, S_IWUSR | S_IRUGO, pod_get_stomp_param_1_note_value, pod_set_stomp_param_1_note_value); -static DEVICE_ATTR(stomp_param_2, S_IRUSR | S_IRUGO, pod_get_stomp_param_2, +static DEVICE_ATTR(stomp_param_2, S_IWUSR | S_IRUGO, pod_get_stomp_param_2, pod_set_stomp_param_2); -static DEVICE_ATTR(stomp_param_3, S_IRUSR | S_IRUGO, pod_get_stomp_param_3, +static DEVICE_ATTR(stomp_param_3, S_IWUSR | S_IRUGO, pod_get_stomp_param_3, pod_set_stomp_param_3); -static DEVICE_ATTR(stomp_param_4, S_IRUSR | S_IRUGO, pod_get_stomp_param_4, +static DEVICE_ATTR(stomp_param_4, S_IWUSR | S_IRUGO, pod_get_stomp_param_4, pod_set_stomp_param_4); -static DEVICE_ATTR(stomp_param_5, S_IRUSR | S_IRUGO, pod_get_stomp_param_5, +static DEVICE_ATTR(stomp_param_5, S_IWUSR | S_IRUGO, pod_get_stomp_param_5, pod_set_stomp_param_5); -static DEVICE_ATTR(stomp_param_6, S_IRUSR | S_IRUGO, pod_get_stomp_param_6, +static DEVICE_ATTR(stomp_param_6, S_IWUSR | S_IRUGO, pod_get_stomp_param_6, pod_set_stomp_param_6); -static DEVICE_ATTR(amp_switch_select, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(amp_switch_select, S_IWUSR | S_IRUGO, pod_get_amp_switch_select, pod_set_amp_switch_select); -static DEVICE_ATTR(delay_param_4, S_IRUSR | S_IRUGO, pod_get_delay_param_4, +static DEVICE_ATTR(delay_param_4, S_IWUSR | S_IRUGO, pod_get_delay_param_4, pod_set_delay_param_4); -static DEVICE_ATTR(delay_param_5, S_IRUSR | S_IRUGO, pod_get_delay_param_5, +static DEVICE_ATTR(delay_param_5, S_IWUSR | S_IRUGO, pod_get_delay_param_5, pod_set_delay_param_5); -static DEVICE_ATTR(delay_pre_post, S_IRUSR | S_IRUGO, pod_get_delay_pre_post, +static DEVICE_ATTR(delay_pre_post, S_IWUSR | S_IRUGO, pod_get_delay_pre_post, pod_set_delay_pre_post); -static DEVICE_ATTR(delay_model, S_IRUSR | S_IRUGO, pod_get_delay_model, +static DEVICE_ATTR(delay_model, S_IWUSR | S_IRUGO, pod_get_delay_model, pod_set_delay_model); -static DEVICE_ATTR(delay_verb_model, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(delay_verb_model, S_IWUSR | S_IRUGO, pod_get_delay_verb_model, pod_set_delay_verb_model); -static DEVICE_ATTR(tempo_msb, S_IRUSR | S_IRUGO, pod_get_tempo_msb, +static DEVICE_ATTR(tempo_msb, S_IWUSR | S_IRUGO, pod_get_tempo_msb, pod_set_tempo_msb); -static DEVICE_ATTR(tempo_lsb, S_IRUSR | S_IRUGO, pod_get_tempo_lsb, +static DEVICE_ATTR(tempo_lsb, S_IWUSR | S_IRUGO, pod_get_tempo_lsb, pod_set_tempo_lsb); -static DEVICE_ATTR(wah_model, S_IRUSR | S_IRUGO, pod_get_wah_model, +static DEVICE_ATTR(wah_model, S_IWUSR | S_IRUGO, pod_get_wah_model, pod_set_wah_model); -static DEVICE_ATTR(bypass_volume, S_IRUSR | S_IRUGO, pod_get_bypass_volume, +static DEVICE_ATTR(bypass_volume, S_IWUSR | S_IRUGO, pod_get_bypass_volume, pod_set_bypass_volume); -static DEVICE_ATTR(fx_loop_on_off, S_IRUSR | S_IRUGO, pod_get_fx_loop_on_off, +static DEVICE_ATTR(fx_loop_on_off, S_IWUSR | S_IRUGO, pod_get_fx_loop_on_off, pod_set_fx_loop_on_off); -static DEVICE_ATTR(tweak_param_select, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(tweak_param_select, S_IWUSR | S_IRUGO, pod_get_tweak_param_select, pod_set_tweak_param_select); -static DEVICE_ATTR(amp1_engage, S_IRUSR | S_IRUGO, pod_get_amp1_engage, +static DEVICE_ATTR(amp1_engage, S_IWUSR | S_IRUGO, pod_get_amp1_engage, pod_set_amp1_engage); -static DEVICE_ATTR(band_1_gain, S_IRUSR | S_IRUGO, pod_get_band_1_gain, +static DEVICE_ATTR(band_1_gain, S_IWUSR | S_IRUGO, pod_get_band_1_gain, pod_set_band_1_gain); -static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IRUSR | S_IRUGO, +static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUSR | S_IRUGO, pod_get_band_2_gain__bass, pod_set_band_2_gain__bass); -static DEVICE_ATTR(band_2_gain, S_IRUSR | S_IRUGO, pod_get_band_2_gain, +static DEVICE_ATTR(band_2_gain, S_IWUSR | S_IRUGO, pod_get_band_2_gain, pod_set_band_2_gain); -static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IRUSR | S_IRUGO, +static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUSR | S_IRUGO, pod_get_band_3_gain__bass, pod_set_band_3_gain__bass); -static DEVICE_ATTR(band_3_gain, S_IRUSR | S_IRUGO, pod_get_band_3_gain, +static DEVICE_ATTR(band_3_gain, S_IWUSR | S_IRUGO, pod_get_band_3_gain, pod_set_band_3_gain); -static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IRUSR | S_IRUGO, +static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUSR | S_IRUGO, pod_get_band_4_gain__bass, pod_set_band_4_gain__bass); -static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IRUSR | S_IRUGO, +static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUSR | S_IRUGO, pod_get_band_5_gain__bass, pod_set_band_5_gain__bass); -static DEVICE_ATTR(band_4_gain, S_IRUSR | S_IRUGO, pod_get_band_4_gain, +static DEVICE_ATTR(band_4_gain, S_IWUSR | S_IRUGO, pod_get_band_4_gain, pod_set_band_4_gain); -static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IRUSR | S_IRUGO, +static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUSR | S_IRUGO, pod_get_band_6_gain__bass, pod_set_band_6_gain__bass); static DEVICE_ATTR(body, S_IRUGO, variax_get_body, line6_nop_write); static DEVICE_ATTR(pickup1_enable, S_IRUGO, variax_get_pickup1_enable, diff --git a/drivers/staging/line6/midi.c b/drivers/staging/line6/midi.c index 5388bd7226c..ab67e889d2c 100644 --- a/drivers/staging/line6/midi.c +++ b/drivers/staging/line6/midi.c @@ -350,9 +350,9 @@ static ssize_t midi_set_midi_mask_receive(struct device *dev, return count; } -static DEVICE_ATTR(midi_mask_transmit, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(midi_mask_transmit, S_IWUSR | S_IRUGO, midi_get_midi_mask_transmit, midi_set_midi_mask_transmit); -static DEVICE_ATTR(midi_mask_receive, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(midi_mask_receive, S_IWUSR | S_IRUGO, midi_get_midi_mask_receive, midi_set_midi_mask_receive); /* MIDI device destructor */ diff --git a/drivers/staging/line6/pcm.c b/drivers/staging/line6/pcm.c index 9b34338178d..b9c55f9eb50 100644 --- a/drivers/staging/line6/pcm.c +++ b/drivers/staging/line6/pcm.c @@ -79,9 +79,9 @@ static ssize_t pcm_set_impulse_period(struct device *dev, return count; } -static DEVICE_ATTR(impulse_volume, S_IRUSR | S_IRUGO, pcm_get_impulse_volume, +static DEVICE_ATTR(impulse_volume, S_IWUSR | S_IRUGO, pcm_get_impulse_volume, pcm_set_impulse_volume); -static DEVICE_ATTR(impulse_period, S_IRUSR | S_IRUGO, pcm_get_impulse_period, +static DEVICE_ATTR(impulse_period, S_IWUSR | S_IRUGO, pcm_get_impulse_period, pcm_set_impulse_period); #endif diff --git a/drivers/staging/line6/pod.c b/drivers/staging/line6/pod.c index ed27ac19501..d9b30212585 100644 --- a/drivers/staging/line6/pod.c +++ b/drivers/staging/line6/pod.c @@ -1051,48 +1051,48 @@ POD_GET_SYSTEM_PARAM(tuner_pitch, 1); #undef GET_SYSTEM_PARAM /* POD special files: */ -static DEVICE_ATTR(channel, S_IRUSR | S_IRUGO, pod_get_channel, +static DEVICE_ATTR(channel, S_IWUSR | S_IRUGO, pod_get_channel, pod_set_channel); static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write); static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write); static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write); -static DEVICE_ATTR(dump, S_IRUSR | S_IRUGO, pod_get_dump, pod_set_dump); -static DEVICE_ATTR(dump_buf, S_IRUSR | S_IRUGO, pod_get_dump_buf, +static DEVICE_ATTR(dump, S_IWUSR | S_IRUGO, pod_get_dump, pod_set_dump); +static DEVICE_ATTR(dump_buf, S_IWUSR | S_IRUGO, pod_get_dump_buf, pod_set_dump_buf); -static DEVICE_ATTR(finish, S_IRUSR, line6_nop_read, pod_set_finish); +static DEVICE_ATTR(finish, S_IWUSR, line6_nop_read, pod_set_finish); static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version, line6_nop_write); -static DEVICE_ATTR(midi_postprocess, S_IRUSR | S_IRUGO, +static DEVICE_ATTR(midi_postprocess, S_IWUSR | S_IRUGO, pod_get_midi_postprocess, pod_set_midi_postprocess); -static DEVICE_ATTR(monitor_level, S_IRUSR | S_IRUGO, pod_get_monitor_level, +static DEVICE_ATTR(monitor_level, S_IWUSR | S_IRUGO, pod_get_monitor_level, pod_set_monitor_level); static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write); static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write); -static DEVICE_ATTR(retrieve_amp_setup, S_IRUSR, line6_nop_read, +static DEVICE_ATTR(retrieve_amp_setup, S_IWUSR, line6_nop_read, pod_set_retrieve_amp_setup); -static DEVICE_ATTR(retrieve_channel, S_IRUSR, line6_nop_read, +static DEVICE_ATTR(retrieve_channel, S_IWUSR, line6_nop_read, pod_set_retrieve_channel); -static DEVICE_ATTR(retrieve_effects_setup, S_IRUSR, line6_nop_read, +static DEVICE_ATTR(retrieve_effects_setup, S_IWUSR, line6_nop_read, pod_set_retrieve_effects_setup); -static DEVICE_ATTR(routing, S_IRUSR | S_IRUGO, pod_get_routing, +static DEVICE_ATTR(routing, S_IWUSR | S_IRUGO, pod_get_routing, pod_set_routing); static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number, line6_nop_write); -static DEVICE_ATTR(store_amp_setup, S_IRUSR, line6_nop_read, +static DEVICE_ATTR(store_amp_setup, S_IWUSR, line6_nop_read, pod_set_store_amp_setup); -static DEVICE_ATTR(store_channel, S_IRUSR, line6_nop_read, +static DEVICE_ATTR(store_channel, S_IWUSR, line6_nop_read, pod_set_store_channel); -static DEVICE_ATTR(store_effects_setup, S_IRUSR, line6_nop_read, +static DEVICE_ATTR(store_effects_setup, S_IWUSR, line6_nop_read, pod_set_store_effects_setup); -static DEVICE_ATTR(tuner_freq, S_IRUSR | S_IRUGO, pod_get_tuner_freq, +static DEVICE_ATTR(tuner_freq, S_IWUSR | S_IRUGO, pod_get_tuner_freq, pod_set_tuner_freq); -static DEVICE_ATTR(tuner_mute, S_IRUSR | S_IRUGO, pod_get_tuner_mute, +static DEVICE_ATTR(tuner_mute, S_IWUSR | S_IRUGO, pod_get_tuner_mute, pod_set_tuner_mute); static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write); static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write); #ifdef CONFIG_LINE6_USB_RAW -static DEVICE_ATTR(raw, S_IRUSR, line6_nop_read, line6_set_raw); +static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw); #endif /* control info callback */ diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c index 6bcf0366e89..879e6992bbc 100644 --- a/drivers/staging/line6/toneport.c +++ b/drivers/staging/line6/toneport.c @@ -154,9 +154,9 @@ static ssize_t toneport_set_led_green(struct device *dev, return count; } -static DEVICE_ATTR(led_red, S_IRUSR | S_IRUGO, line6_nop_read, +static DEVICE_ATTR(led_red, S_IWUSR | S_IRUGO, line6_nop_read, toneport_set_led_red); -static DEVICE_ATTR(led_green, S_IRUSR | S_IRUGO, line6_nop_read, +static DEVICE_ATTR(led_green, S_IWUSR | S_IRUGO, line6_nop_read, toneport_set_led_green); static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2) diff --git a/drivers/staging/line6/variax.c b/drivers/staging/line6/variax.c index 803bc752ab8..81241cdf1be 100644 --- a/drivers/staging/line6/variax.c +++ b/drivers/staging/line6/variax.c @@ -549,21 +549,21 @@ static ssize_t variax_set_raw2(struct device *dev, #endif /* Variax workbench special files: */ -static DEVICE_ATTR(model, S_IRUSR | S_IRUGO, variax_get_model, +static DEVICE_ATTR(model, S_IWUSR | S_IRUGO, variax_get_model, variax_set_model); -static DEVICE_ATTR(volume, S_IRUSR | S_IRUGO, variax_get_volume, +static DEVICE_ATTR(volume, S_IWUSR | S_IRUGO, variax_get_volume, variax_set_volume); -static DEVICE_ATTR(tone, S_IRUSR | S_IRUGO, variax_get_tone, variax_set_tone); +static DEVICE_ATTR(tone, S_IWUSR | S_IRUGO, variax_get_tone, variax_set_tone); static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write); static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write); static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write); -static DEVICE_ATTR(active, S_IRUSR | S_IRUGO, variax_get_active, +static DEVICE_ATTR(active, S_IWUSR | S_IRUGO, variax_get_active, variax_set_active); static DEVICE_ATTR(guitar, S_IRUGO, variax_get_guitar, line6_nop_write); #ifdef CONFIG_LINE6_USB_RAW -static DEVICE_ATTR(raw, S_IRUSR, line6_nop_read, line6_set_raw); -static DEVICE_ATTR(raw2, S_IRUSR, line6_nop_read, variax_set_raw2); +static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw); +static DEVICE_ATTR(raw2, S_IWUSR, line6_nop_read, variax_set_raw2); #endif /* -- cgit v1.2.3-70-g09d2 From a48a982a6bd3896274dd643397c72da9258411e2 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Tue, 2 Nov 2010 23:36:02 +0100 Subject: fs/ocfs2/dlm: Use GFP_ATOMIC under spin_lock coccinelle check scripts/coccinelle/locks/call_kern.cocci found that in fs/ocfs2/dlm/dlmdomain.c an allocation with GFP_KERNEL is done with locks held: dlm_query_region_handler spin_lock(dlm_domain_lock) dlm_match_regions kmalloc(GFP_KERNEL) Change it to GFP_ATOMIC. Signed-off-by: David Sterba CC: Joel Becker CC: Mark Fasheh CC: ocfs2-devel@oss.oracle.com -- Exists in v2.6.37-rc1 and current linux-next. Signed-off-by: Joel Becker --- fs/ocfs2/dlm/dlmdomain.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c index 58a93b95373..cc2aaa96cfe 100644 --- a/fs/ocfs2/dlm/dlmdomain.c +++ b/fs/ocfs2/dlm/dlmdomain.c @@ -959,7 +959,7 @@ static int dlm_match_regions(struct dlm_ctxt *dlm, r += O2HB_MAX_REGION_NAME_LEN; } - local = kmalloc(sizeof(qr->qr_regions), GFP_KERNEL); + local = kmalloc(sizeof(qr->qr_regions), GFP_ATOMIC); if (!local) { status = -ENOMEM; goto bail; -- cgit v1.2.3-70-g09d2 From 1cf257f511918ba5b2eabd64d9acd40f1d7866ef Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 6 Nov 2010 10:06:52 +0100 Subject: ocfs2: fix memory leak Stanse found that o2hb_heartbeat_group_make_item leaks some memory on fail paths. Fix the paths by adding a new label and jump there. Signed-off-by: Jiri Slaby Cc: Mark Fasheh Cc: Joel Becker Cc: ocfs2-devel@oss.oracle.com Cc: Alexander Viro Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Joel Becker --- fs/ocfs2/cluster/heartbeat.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index 52c7557f3e2..9f26ac9be2a 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -1964,8 +1964,10 @@ static struct config_item *o2hb_heartbeat_group_make_item(struct config_group *g if (reg == NULL) return ERR_PTR(-ENOMEM); - if (strlen(name) > O2HB_MAX_REGION_NAME_LEN) - return ERR_PTR(-ENAMETOOLONG); + if (strlen(name) > O2HB_MAX_REGION_NAME_LEN) { + ret = -ENAMETOOLONG; + goto free; + } spin_lock(&o2hb_live_lock); reg->hr_region_num = 0; @@ -1974,7 +1976,8 @@ static struct config_item *o2hb_heartbeat_group_make_item(struct config_group *g O2NM_MAX_REGIONS); if (reg->hr_region_num >= O2NM_MAX_REGIONS) { spin_unlock(&o2hb_live_lock); - return ERR_PTR(-EFBIG); + ret = -EFBIG; + goto free; } set_bit(reg->hr_region_num, o2hb_region_bitmap); } @@ -1986,10 +1989,13 @@ static struct config_item *o2hb_heartbeat_group_make_item(struct config_group *g ret = o2hb_debug_region_init(reg, o2hb_debug_dir); if (ret) { config_item_put(®->hr_item); - return ERR_PTR(ret); + goto free; } return ®->hr_item; +free: + kfree(reg); + return ERR_PTR(ret); } static void o2hb_heartbeat_group_drop_item(struct config_group *group, -- cgit v1.2.3-70-g09d2 From 1989a80a60d2f620bad99196d6c1801c2afd7c71 Mon Sep 17 00:00:00 2001 From: Tristan Ye Date: Mon, 15 Nov 2010 21:39:09 +0800 Subject: Ocfs2: Stop tracking a negative dentry after dentry_iput(). I suddenly hit the problem during 2.6.37-rc1 regression test, which was introduced by commit '5e98d492406818e6a94c0ba54c61f59d40cefa4a'(Track negative entries v3), following scenario reproduces the issue easily: Node A Node B ================ ============ $touch testfile $ls testfile $rm -rf testfile $touch testfile $ls testfile ls: cannot access testfile: No such file or directory This patch stops tracking the dentry which was negativated by a inode deletion, so as to force the revaliation in next lookup, in case we'll touch the inode again in the same node. It didn't hurt the performance of multiple lookup for none-existed files anyway, while regresses a bit in the first try after a file deletion. Signed-off-by: Tristan Ye Signed-off-by: Joel Becker --- fs/ocfs2/dcache.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c index edaded48e7e..895532ac4d9 100644 --- a/fs/ocfs2/dcache.c +++ b/fs/ocfs2/dcache.c @@ -476,7 +476,6 @@ static void ocfs2_dentry_iput(struct dentry *dentry, struct inode *inode) out: iput(inode); - ocfs2_dentry_attach_gen(dentry); } /* -- cgit v1.2.3-70-g09d2 From a2a2f55291918f6cf9287d7beaecc7bc007a9f1c Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Wed, 17 Nov 2010 22:20:11 -0600 Subject: ocfs2: char is not always signed Commit 1c66b360fe262 (Change some lock status member in ocfs2_lock_res to char.) states that these fields need to be signed due to comparision to -1, but only changed the type from unsigned char to char. However, it is a compiler option if char is a signed or unsigned type. Change these fields to signed char so the code will work with all compilers. Signed-off-by: Milton Miller Signed-off-by: Joel Becker --- fs/ocfs2/ocfs2.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 1efea361558..70dd3b1798f 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -159,9 +159,9 @@ struct ocfs2_lock_res { char l_name[OCFS2_LOCK_ID_MAX_LEN]; unsigned int l_ro_holders; unsigned int l_ex_holders; - char l_level; - char l_requested; - char l_blocking; + signed char l_level; + signed char l_requested; + signed char l_blocking; /* Data packed - type enum ocfs2_lock_type */ unsigned char l_type; -- cgit v1.2.3-70-g09d2 From 226291aa4641fa13cb5dec3bcb3379faa83009e2 Mon Sep 17 00:00:00 2001 From: dann frazier Date: Thu, 18 Nov 2010 15:03:09 -0700 Subject: ocfs2_connection_find() returns pointer to bad structure If ocfs2_live_connection_list is empty, ocfs2_connection_find() will return a pointer to the LIST_HEAD, cast as a ocfs2_live_connection. This can cause an oops when ocfs2_control_send_down() dereferences c->oc_conn: Call Trace: [] ocfs2_control_message+0x28c/0x2b0 [ocfs2_stack_user] [] ocfs2_control_write+0x35/0xb0 [ocfs2_stack_user] [] vfs_write+0xb8/0x1a0 [] ? do_page_fault+0x153/0x3b0 [] sys_write+0x51/0x80 [] system_call_fastpath+0x16/0x1b Fix by explicitly returning NULL if no match is found. Signed-off-by: dann frazier Signed-off-by: Joel Becker --- fs/ocfs2/stack_user.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c index 252e7c82f92..a5ebe421195 100644 --- a/fs/ocfs2/stack_user.c +++ b/fs/ocfs2/stack_user.c @@ -190,7 +190,7 @@ static struct ocfs2_live_connection *ocfs2_connection_find(const char *name) return c; } - return c; + return NULL; } /* -- cgit v1.2.3-70-g09d2 From 14870b457524e745f1a118e17873d104b1a47b70 Mon Sep 17 00:00:00 2001 From: Abhijith Das Date: Thu, 18 Nov 2010 11:24:24 -0500 Subject: GFS2: Userland expects quota limit/warn/usage in 512b blocks Userland programs using the quotactl() syscall assume limit/warn/usage block counts in 512b basic blocks which were instead being read/written in fs blocksize in gfs2. With this patch, gfs2 correctly interacts with the syscall using 512b blocks. Signed-off-by: Abhi Das Reviewed-by: Christoph Hellwig Signed-off-by: Steven Whitehouse --- fs/gfs2/quota.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c index 58a9b9998b4..f606baf9ba7 100644 --- a/fs/gfs2/quota.c +++ b/fs/gfs2/quota.c @@ -631,6 +631,7 @@ static int gfs2_adjust_quota(struct gfs2_inode *ip, loff_t loc, struct fs_disk_quota *fdq) { struct inode *inode = &ip->i_inode; + struct gfs2_sbd *sdp = GFS2_SB(inode); struct address_space *mapping = inode->i_mapping; unsigned long index = loc >> PAGE_CACHE_SHIFT; unsigned offset = loc & (PAGE_CACHE_SIZE - 1); @@ -658,11 +659,11 @@ static int gfs2_adjust_quota(struct gfs2_inode *ip, loff_t loc, qd->qd_qb.qb_value = qp->qu_value; if (fdq) { if (fdq->d_fieldmask & FS_DQ_BSOFT) { - qp->qu_warn = cpu_to_be64(fdq->d_blk_softlimit); + qp->qu_warn = cpu_to_be64(fdq->d_blk_softlimit >> sdp->sd_fsb2bb_shift); qd->qd_qb.qb_warn = qp->qu_warn; } if (fdq->d_fieldmask & FS_DQ_BHARD) { - qp->qu_limit = cpu_to_be64(fdq->d_blk_hardlimit); + qp->qu_limit = cpu_to_be64(fdq->d_blk_hardlimit >> sdp->sd_fsb2bb_shift); qd->qd_qb.qb_limit = qp->qu_limit; } } @@ -1497,9 +1498,9 @@ static int gfs2_get_dqblk(struct super_block *sb, int type, qid_t id, fdq->d_version = FS_DQUOT_VERSION; fdq->d_flags = (type == QUOTA_USER) ? FS_USER_QUOTA : FS_GROUP_QUOTA; fdq->d_id = id; - fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit); - fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn); - fdq->d_bcount = be64_to_cpu(qlvb->qb_value); + fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit) << sdp->sd_fsb2bb_shift; + fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn) << sdp->sd_fsb2bb_shift; + fdq->d_bcount = be64_to_cpu(qlvb->qb_value) << sdp->sd_fsb2bb_shift; gfs2_glock_dq_uninit(&q_gh); out: @@ -1566,10 +1567,10 @@ static int gfs2_set_dqblk(struct super_block *sb, int type, qid_t id, /* If nothing has changed, this is a no-op */ if ((fdq->d_fieldmask & FS_DQ_BSOFT) && - (fdq->d_blk_softlimit == be64_to_cpu(qd->qd_qb.qb_warn))) + ((fdq->d_blk_softlimit >> sdp->sd_fsb2bb_shift) == be64_to_cpu(qd->qd_qb.qb_warn))) fdq->d_fieldmask ^= FS_DQ_BSOFT; if ((fdq->d_fieldmask & FS_DQ_BHARD) && - (fdq->d_blk_hardlimit == be64_to_cpu(qd->qd_qb.qb_limit))) + ((fdq->d_blk_hardlimit >> sdp->sd_fsb2bb_shift) == be64_to_cpu(qd->qd_qb.qb_limit))) fdq->d_fieldmask ^= FS_DQ_BHARD; if (fdq->d_fieldmask == 0) goto out_i; -- cgit v1.2.3-70-g09d2 From 412dc7f368bf10a8049a8a4c41abbfd0108742e7 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 19 Nov 2010 09:30:18 -0800 Subject: staging: fix winbond build, needs delay.h winbond drivers use msleep() and delay(), so include linux/delay.h in a common header file to prevent build errors. drivers/staging/winbond/phy_calibration.c:987: error: implicit declaration of function 'msleep' drivers/staging/winbond/phy_calibration.c:1556: error: implicit declaration of function 'udelay' drivers/staging/winbond/reg.c:894: error: implicit declaration of function 'msleep' drivers/staging/winbond/reg.c:1178: error: implicit declaration of function 'udelay' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/sysdef.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/winbond/sysdef.h b/drivers/staging/winbond/sysdef.h index 9195adf98e1..d0d71f69bc8 100644 --- a/drivers/staging/winbond/sysdef.h +++ b/drivers/staging/winbond/sysdef.h @@ -2,6 +2,9 @@ #ifndef SYS_DEF_H #define SYS_DEF_H + +#include + #define WB_LINUX #define WB_LINUX_WPA_PSK -- cgit v1.2.3-70-g09d2 From 7a3783efffc7bc2e702d774e47fad5b8e37e9ad1 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Wed, 17 Nov 2010 16:26:50 -0800 Subject: xhci: Fix reset-device and configure-endpoint commands We have been having problems with the USB-IF Gold Tree tests when plugging and unplugging devices from the tree. I have seen that the reset-device and configure-endpoint commands, which are invoked from xhci_discover_or_reset_device() and xhci_configure_endpoint(), will sometimes time out. After much debugging, I determined that the commands themselves do not actually time out, but rather their completion events do not get delivered to the right place. This happens when the command ring has just wrapped around, and it's enqueue pointer is left pointing to the link TRB. xhci_discover_or_reset_device() and xhci_configure_endpoint() use the enqueue pointer directly as their command TRB pointer, without checking whether it's pointing to the link TRB. When the completion event arrives, if the command TRB is pointing to the link TRB, the check against the command ring dequeue pointer in handle_cmd_in_cmd_wait_list() fails, so the completion inside the command does not get signaled. The patch below fixes the timeout problem for me. This should be queued for the 2.6.35 and 2.6.36 stable trees. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 06fca0835b5..45e4a3108cc 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1549,6 +1549,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, cmd_completion = command->completion; cmd_status = &command->status; command->command_trb = xhci->cmd_ring->enqueue; + + /* Enqueue pointer can be left pointing to the link TRB, + * we must handle that + */ + if ((command->command_trb->link.control & TRB_TYPE_BITMASK) + == TRB_TYPE(TRB_LINK)) + command->command_trb = + xhci->cmd_ring->enq_seg->next->trbs; + list_add_tail(&command->cmd_list, &virt_dev->cmd_list); } else { in_ctx = virt_dev->in_ctx; @@ -2272,6 +2281,15 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) /* Attempt to submit the Reset Device command to the command ring */ spin_lock_irqsave(&xhci->lock, flags); reset_device_cmd->command_trb = xhci->cmd_ring->enqueue; + + /* Enqueue pointer can be left pointing to the link TRB, + * we must handle that + */ + if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK) + == TRB_TYPE(TRB_LINK)) + reset_device_cmd->command_trb = + xhci->cmd_ring->enq_seg->next->trbs; + list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); ret = xhci_queue_reset_device(xhci, slot_id); if (ret) { -- cgit v1.2.3-70-g09d2 From da6699ce4a889c3795624ccdcfe7181cc89f18e8 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 26 Oct 2010 16:47:13 -0700 Subject: xhci: Setup array of USB 2.0 and USB 3.0 ports. An xHCI host controller contains USB 2.0 and USB 3.0 ports, which can occur in any order in the PORTSC registers. We cannot read the port speed bits in the PORTSC registers at init time to determine the port speed, since those bits are only valid when a USB device is plugged into the port. Instead, we read the "Supported Protocol Capability" registers in the xHC Extended Capabilities space. Those describe the protocol, port offset in the PORTSC registers, and port count. We use those registers to create two arrays of pointers to the PORTSC registers, one for USB 3.0 ports, and another for USB 2.0 ports. A third array keeps track of the port protocol major revision, and is indexed with the internal xHCI port number. This commit is a bit big, but it should be queued for stable because the "Don't let the USB core disable SuperSpeed ports" patch depends on it. There is no other way to determine which ports are SuperSpeed ports without this patch. Signed-off-by: Sarah Sharp Tested-by: Don Zickus Cc: stable@kernel.org --- drivers/usb/host/xhci-mem.c | 164 ++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/host/xhci.h | 26 +++++++ 2 files changed, 190 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index d178761c398..0fae58ef8af 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->dcbaa = NULL; scratchpad_free(xhci); + + xhci->num_usb2_ports = 0; + xhci->num_usb3_ports = 0; + kfree(xhci->usb2_ports); + kfree(xhci->usb3_ports); + kfree(xhci->port_array); + xhci->page_size = 0; xhci->page_shift = 0; xhci->bus_suspended = 0; @@ -1627,6 +1634,161 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci) &xhci->ir_set->erst_dequeue); } +static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, + u32 __iomem *addr, u8 major_revision) +{ + u32 temp, port_offset, port_count; + int i; + + if (major_revision > 0x03) { + xhci_warn(xhci, "Ignoring unknown port speed, " + "Ext Cap %p, revision = 0x%x\n", + addr, major_revision); + /* Ignoring port protocol we can't understand. FIXME */ + return; + } + + /* Port offset and count in the third dword, see section 7.2 */ + temp = xhci_readl(xhci, addr + 2); + port_offset = XHCI_EXT_PORT_OFF(temp); + port_count = XHCI_EXT_PORT_COUNT(temp); + xhci_dbg(xhci, "Ext Cap %p, port offset = %u, " + "count = %u, revision = 0x%x\n", + addr, port_offset, port_count, major_revision); + /* Port count includes the current port offset */ + if (port_offset == 0 || (port_offset + port_count - 1) > num_ports) + /* WTF? "Valid values are ‘1’ to MaxPorts" */ + return; + port_offset--; + for (i = port_offset; i < (port_offset + port_count); i++) { + /* Duplicate entry. Ignore the port if the revisions differ. */ + if (xhci->port_array[i] != 0) { + xhci_warn(xhci, "Duplicate port entry, Ext Cap %p," + " port %u\n", addr, i); + xhci_warn(xhci, "Port was marked as USB %u, " + "duplicated as USB %u\n", + xhci->port_array[i], major_revision); + /* Only adjust the roothub port counts if we haven't + * found a similar duplicate. + */ + if (xhci->port_array[i] != major_revision && + xhci->port_array[i] != (u8) -1) { + if (xhci->port_array[i] == 0x03) + xhci->num_usb3_ports--; + else + xhci->num_usb2_ports--; + xhci->port_array[i] = (u8) -1; + } + /* FIXME: Should we disable the port? */ + } + xhci->port_array[i] = major_revision; + if (major_revision == 0x03) + xhci->num_usb3_ports++; + else + xhci->num_usb2_ports++; + } + /* FIXME: Should we disable ports not in the Extended Capabilities? */ +} + +/* + * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that + * specify what speeds each port is supposed to be. We can't count on the port + * speed bits in the PORTSC register being correct until a device is connected, + * but we need to set up the two fake roothubs with the correct number of USB + * 3.0 and USB 2.0 ports at host controller initialization time. + */ +static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) +{ + u32 __iomem *addr; + u32 offset; + unsigned int num_ports; + int i, port_index; + + addr = &xhci->cap_regs->hcc_params; + offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr)); + if (offset == 0) { + xhci_err(xhci, "No Extended Capability registers, " + "unable to set up roothub.\n"); + return -ENODEV; + } + + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); + xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags); + if (!xhci->port_array) + return -ENOMEM; + + /* + * For whatever reason, the first capability offset is from the + * capability register base, not from the HCCPARAMS register. + * See section 5.3.6 for offset calculation. + */ + addr = &xhci->cap_regs->hc_capbase + offset; + while (1) { + u32 cap_id; + + cap_id = xhci_readl(xhci, addr); + if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL) + xhci_add_in_port(xhci, num_ports, addr, + (u8) XHCI_EXT_PORT_MAJOR(cap_id)); + offset = XHCI_EXT_CAPS_NEXT(cap_id); + if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports) + == num_ports) + break; + /* + * Once you're into the Extended Capabilities, the offset is + * always relative to the register holding the offset. + */ + addr += offset; + } + + if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) { + xhci_warn(xhci, "No ports on the roothubs?\n"); + return -ENODEV; + } + xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n", + xhci->num_usb2_ports, xhci->num_usb3_ports); + /* + * Note we could have all USB 3.0 ports, or all USB 2.0 ports. + * Not sure how the USB core will handle a hub with no ports... + */ + if (xhci->num_usb2_ports) { + xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)* + xhci->num_usb2_ports, flags); + if (!xhci->usb2_ports) + return -ENOMEM; + + port_index = 0; + for (i = 0; i < num_ports; i++) + if (xhci->port_array[i] != 0x03) { + xhci->usb2_ports[port_index] = + &xhci->op_regs->port_status_base + + NUM_PORT_REGS*i; + xhci_dbg(xhci, "USB 2.0 port at index %u, " + "addr = %p\n", i, + xhci->usb2_ports[port_index]); + port_index++; + } + } + if (xhci->num_usb3_ports) { + xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)* + xhci->num_usb3_ports, flags); + if (!xhci->usb3_ports) + return -ENOMEM; + + port_index = 0; + for (i = 0; i < num_ports; i++) + if (xhci->port_array[i] == 0x03) { + xhci->usb3_ports[port_index] = + &xhci->op_regs->port_status_base + + NUM_PORT_REGS*i; + xhci_dbg(xhci, "USB 3.0 port at index %u, " + "addr = %p\n", i, + xhci->usb3_ports[port_index]); + port_index++; + } + } + return 0; +} int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) { @@ -1809,6 +1971,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) if (scratchpad_alloc(xhci, flags)) goto fail; + if (xhci_setup_port_arrays(xhci, flags)) + goto fail; return 0; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 85e65647d44..170c367112d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -453,6 +453,24 @@ struct xhci_doorbell_array { #define STREAM_ID_TO_DB(p) (((p) & 0xffff) << 16) +/** + * struct xhci_protocol_caps + * @revision: major revision, minor revision, capability ID, + * and next capability pointer. + * @name_string: Four ASCII characters to say which spec this xHC + * follows, typically "USB ". + * @port_info: Port offset, count, and protocol-defined information. + */ +struct xhci_protocol_caps { + u32 revision; + u32 name_string; + u32 port_info; +}; + +#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) +#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff) +#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) + /** * struct xhci_container_ctx * @type: Type of context. Used to calculated offsets to contained contexts. @@ -1240,6 +1258,14 @@ struct xhci_hcd { u32 suspended_ports[8]; /* which ports are suspended */ unsigned long resume_done[MAX_HC_PORTS]; + /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ + u8 *port_array; + /* Array of pointers to USB 3.0 PORTSC registers */ + u32 __iomem **usb3_ports; + unsigned int num_usb3_ports; + /* Array of pointers to USB 2.0 PORTSC registers */ + u32 __iomem **usb2_ports; + unsigned int num_usb2_ports; }; /* For testing purposes */ -- cgit v1.2.3-70-g09d2 From 6dd0a3a7e0793dbeae1b951f091025d8cf896cb4 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 16 Nov 2010 15:58:52 -0800 Subject: xhci: Don't let the USB core disable SuperSpeed ports. Disabling SuperSpeed ports is a Very Bad Thing (TM). It disables SuperSpeed terminations, which means that devices will never connect at SuperSpeed on that port. For USB 2.0/1.1 ports, disabling the port meant that the USB core could always get a connect status change later. That's not true with USB 3.0 ports. Do not let the USB core disable SuperSpeed ports. We can't rely on the device speed in the port status registers, since that isn't valid until there's a USB device connected to the port. Instead, we use the port speed array that's created from the Extended Capabilities registers. Signed-off-by: Sarah Sharp Tested-by: Don Zickus Cc: stable@kernel.org --- drivers/usb/host/xhci-hub.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index fef5a1f9d48..5d963e35049 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -229,6 +229,13 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id) static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex, u32 __iomem *addr, u32 port_status) { + /* Don't allow the USB core to disable SuperSpeed ports. */ + if (xhci->port_array[wIndex] == 0x03) { + xhci_dbg(xhci, "Ignoring request to disable " + "SuperSpeed port.\n"); + return; + } + /* Write 1 to disable the port */ xhci_writel(xhci, port_status | PORT_PE, addr); port_status = xhci_readl(xhci, addr); -- cgit v1.2.3-70-g09d2 From d1d788302e8c76e5138dfa61f4a5eee4f72a748f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 21 Nov 2010 09:23:48 +0000 Subject: drm/i915: Prevent integer overflow when validating the execbuffer Commit 2549d6c2 removed the vmalloc used for temporary storage of the relocation lists used during execbuffer. However, our use of vmalloc was being protected by an integer overflow check which we do want to preserve! Reported-by: Dan Carpenter Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_gem.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 17b1cba3b5f..bc416459005 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3630,8 +3630,15 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec, for (i = 0; i < count; i++) { char __user *ptr = (char __user *)(uintptr_t)exec[i].relocs_ptr; - size_t length = exec[i].relocation_count * sizeof(struct drm_i915_gem_relocation_entry); + int length; /* limited by fault_in_pages_readable() */ + /* First check for malicious input causing overflow */ + if (exec[i].relocation_count > + INT_MAX / sizeof(struct drm_i915_gem_relocation_entry)) + return -EINVAL; + + length = exec[i].relocation_count * + sizeof(struct drm_i915_gem_relocation_entry); if (!access_ok(VERIFY_READ, ptr, length)) return -EFAULT; -- cgit v1.2.3-70-g09d2 From f3c91c1deaf8493526d8216be94c33e963f00962 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 21 Nov 2010 09:56:00 +0000 Subject: drm/i915: Only save/restore cursor regs if !KMS Under KMS, restoring the cursor is handled upon modeswitch in order to avoid enabling an undefined set of registers. At the moment, the cursor is restored before the aperture and modes are fully setup causing some invalid access during resume, such as: PGTBL_ER: 0x00040000 Invalid GTT entry during Cursor Fetch Fix this by only performing cursor register save/restore under UMS where it is done in the correct sequence. Reported-by: Arkadiusz Miskiewicz Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_suspend.c | 40 ++++++++++++++++++------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 454c064f8ef..42729d25da5 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -239,6 +239,16 @@ static void i915_save_modeset_reg(struct drm_device *dev) if (drm_core_check_feature(dev, DRIVER_MODESET)) return; + /* Cursor state */ + dev_priv->saveCURACNTR = I915_READ(CURACNTR); + dev_priv->saveCURAPOS = I915_READ(CURAPOS); + dev_priv->saveCURABASE = I915_READ(CURABASE); + dev_priv->saveCURBCNTR = I915_READ(CURBCNTR); + dev_priv->saveCURBPOS = I915_READ(CURBPOS); + dev_priv->saveCURBBASE = I915_READ(CURBBASE); + if (IS_GEN2(dev)) + dev_priv->saveCURSIZE = I915_READ(CURSIZE); + if (HAS_PCH_SPLIT(dev)) { dev_priv->savePCH_DREF_CONTROL = I915_READ(PCH_DREF_CONTROL); dev_priv->saveDISP_ARB_CTL = I915_READ(DISP_ARB_CTL); @@ -529,6 +539,16 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); I915_WRITE(DSPBADDR, I915_READ(DSPBADDR)); + /* Cursor state */ + I915_WRITE(CURAPOS, dev_priv->saveCURAPOS); + I915_WRITE(CURACNTR, dev_priv->saveCURACNTR); + I915_WRITE(CURABASE, dev_priv->saveCURABASE); + I915_WRITE(CURBPOS, dev_priv->saveCURBPOS); + I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR); + I915_WRITE(CURBBASE, dev_priv->saveCURBBASE); + if (IS_GEN2(dev)) + I915_WRITE(CURSIZE, dev_priv->saveCURSIZE); + return; } @@ -543,16 +563,6 @@ void i915_save_display(struct drm_device *dev) /* Don't save them in KMS mode */ i915_save_modeset_reg(dev); - /* Cursor state */ - dev_priv->saveCURACNTR = I915_READ(CURACNTR); - dev_priv->saveCURAPOS = I915_READ(CURAPOS); - dev_priv->saveCURABASE = I915_READ(CURABASE); - dev_priv->saveCURBCNTR = I915_READ(CURBCNTR); - dev_priv->saveCURBPOS = I915_READ(CURBPOS); - dev_priv->saveCURBBASE = I915_READ(CURBBASE); - if (IS_GEN2(dev)) - dev_priv->saveCURSIZE = I915_READ(CURSIZE); - /* CRT state */ if (HAS_PCH_SPLIT(dev)) { dev_priv->saveADPA = I915_READ(PCH_ADPA); @@ -657,16 +667,6 @@ void i915_restore_display(struct drm_device *dev) /* Don't restore them in KMS mode */ i915_restore_modeset_reg(dev); - /* Cursor state */ - I915_WRITE(CURAPOS, dev_priv->saveCURAPOS); - I915_WRITE(CURACNTR, dev_priv->saveCURACNTR); - I915_WRITE(CURABASE, dev_priv->saveCURABASE); - I915_WRITE(CURBPOS, dev_priv->saveCURBPOS); - I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR); - I915_WRITE(CURBBASE, dev_priv->saveCURBBASE); - if (IS_GEN2(dev)) - I915_WRITE(CURSIZE, dev_priv->saveCURSIZE); - /* CRT state */ if (HAS_PCH_SPLIT(dev)) I915_WRITE(PCH_ADPA, dev_priv->saveADPA); -- cgit v1.2.3-70-g09d2 From 791cfe2684a74ed7155254816ff9e89e6064277c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sun, 21 Nov 2010 10:58:05 -0500 Subject: drm/radeon/kms: fix regression in rs4xx i2c setup typo in my last i2c rework. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=23222 Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 3bddea5b529..137b8075f6e 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -729,7 +729,7 @@ void radeon_combios_i2c_init(struct radeon_device *rdev) clk = RBIOS8(offset + 3 + (i * 5) + 3); data = RBIOS8(offset + 3 + (i * 5) + 4); i2c = combios_setup_i2c_bus(rdev, DDC_MONID, - clk, data); + (1 << clk), (1 << data)); rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK"); break; } -- cgit v1.2.3-70-g09d2 From f24d86f1a49505cdea56728b853a5d0a3f8e3d11 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 19 Nov 2010 23:27:04 +0000 Subject: drm/radeon/kms: fix resume regression for some r5xx laptops I had removed this when I switched the atom indirect io methods to use the io bar rather than the mmio bar, but it appears it's still needed. Reported-by: Mark Lord Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index 8e421f644a5..05efb5b9f13 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -112,6 +112,7 @@ static uint32_t atom_iio_execute(struct atom_context *ctx, int base, base += 3; break; case ATOM_IIO_WRITE: + (void)ctx->card->ioreg_read(ctx->card, CU16(base + 1)); ctx->card->ioreg_write(ctx->card, CU16(base + 1), temp); base += 3; break; -- cgit v1.2.3-70-g09d2 From 784b4e29a26617589edd290dd2919735e190c06e Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Sun, 21 Nov 2010 22:20:49 -0500 Subject: Btrfs: add migrate page for metadata inode Migrate page will directly call the btrfs btree writepage function, which isn't actually allowed. Our writepage assumes that you have locked the extent_buffer and flagged the block as written. Without doing these steps, we can corrupt metadata blocks. A later commit will remove the btree writepage function since it is really only safely used internally by btrfs. We use writepages for everything else. Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index b40dfe48017..a67b98d58c2 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "compat.h" #include "ctree.h" #include "disk-io.h" @@ -355,6 +356,8 @@ static int csum_dirty_buffer(struct btrfs_root *root, struct page *page) ret = btree_read_extent_buffer_pages(root, eb, start + PAGE_CACHE_SIZE, btrfs_header_generation(eb)); BUG_ON(ret); + WARN_ON(!btrfs_header_flag(eb, BTRFS_HEADER_FLAG_WRITTEN)); + found_start = btrfs_header_bytenr(eb); if (found_start != start) { WARN_ON(1); @@ -693,6 +696,26 @@ static int btree_submit_bio_hook(struct inode *inode, int rw, struct bio *bio, __btree_submit_bio_done); } +static int btree_migratepage(struct address_space *mapping, + struct page *newpage, struct page *page) +{ + /* + * we can't safely write a btree page from here, + * we haven't done the locking hook + */ + if (PageDirty(page)) + return -EAGAIN; + /* + * Buffers may be managed in a filesystem specific way. + * We must have no buffers or drop them. + */ + if (page_has_private(page) && + !try_to_release_page(page, GFP_KERNEL)) + return -EAGAIN; + + return migrate_page(mapping, newpage, page); +} + static int btree_writepage(struct page *page, struct writeback_control *wbc) { struct extent_io_tree *tree; @@ -707,8 +730,7 @@ static int btree_writepage(struct page *page, struct writeback_control *wbc) } redirty_page_for_writepage(wbc, page); - eb = btrfs_find_tree_block(root, page_offset(page), - PAGE_CACHE_SIZE); + eb = btrfs_find_tree_block(root, page_offset(page), PAGE_CACHE_SIZE); WARN_ON(!eb); was_dirty = test_and_set_bit(EXTENT_BUFFER_DIRTY, &eb->bflags); @@ -799,6 +821,7 @@ static const struct address_space_operations btree_aops = { .releasepage = btree_releasepage, .invalidatepage = btree_invalidatepage, .sync_page = block_sync_page, + .migratepage = btree_migratepage, }; int readahead_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize, -- cgit v1.2.3-70-g09d2 From 0c56fa9662927354255f2f64617d1de61fc03db9 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 22 Nov 2010 03:01:39 +0000 Subject: btrfs: fix free dip and dip->csums twice bio_endio() will free dip and dip->csums, so dip and dip->csums twice will be freed twice. Fix it. Signed-off-by: Miao Xie Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 5132c9af888..8c027aa0020 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5731,7 +5731,7 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode, ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0); if (ret) - goto out_err; + goto free_ordered; if (write && !skip_sum) { ret = btrfs_wq_submit_bio(BTRFS_I(inode)->root->fs_info, @@ -5740,7 +5740,7 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode, __btrfs_submit_bio_start_direct_io, __btrfs_submit_bio_done); if (ret) - goto out_err; + goto free_ordered; return; } else if (!skip_sum) btrfs_lookup_bio_sums_dio(root, inode, bio, @@ -5748,11 +5748,8 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode, ret = btrfs_map_bio(root, rw, bio, 0, 1); if (ret) - goto out_err; + goto free_ordered; return; -out_err: - kfree(dip->csums); - kfree(dip); free_ordered: /* * If this is a write, we need to clean up the reserved space and kill -- cgit v1.2.3-70-g09d2 From 88f794ede7fadd4b63135b94d1561c1f2d5eb5f5 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 22 Nov 2010 03:02:55 +0000 Subject: btrfs: cleanup duplicate bio allocating functions extent_bio_alloc() and compressed_bio_alloc() are similar, cleanup similar source code. Signed-off-by: Miao Xie Signed-off-by: Chris Mason --- fs/btrfs/compression.c | 15 +-------------- fs/btrfs/extent_io.c | 8 ++++---- fs/btrfs/extent_io.h | 3 +++ 3 files changed, 8 insertions(+), 18 deletions(-) diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c index 7845d1f7d1d..b50bc4bd5c5 100644 --- a/fs/btrfs/compression.c +++ b/fs/btrfs/compression.c @@ -91,23 +91,10 @@ static inline int compressed_bio_size(struct btrfs_root *root, static struct bio *compressed_bio_alloc(struct block_device *bdev, u64 first_byte, gfp_t gfp_flags) { - struct bio *bio; int nr_vecs; nr_vecs = bio_get_nr_vecs(bdev); - bio = bio_alloc(gfp_flags, nr_vecs); - - if (bio == NULL && (current->flags & PF_MEMALLOC)) { - while (!bio && (nr_vecs /= 2)) - bio = bio_alloc(gfp_flags, nr_vecs); - } - - if (bio) { - bio->bi_size = 0; - bio->bi_bdev = bdev; - bio->bi_sector = first_byte >> 9; - } - return bio; + return btrfs_bio_alloc(bdev, first_byte >> 9, nr_vecs, gfp_flags); } static int check_compressed_csum(struct inode *inode, diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 3b7eaee0f91..f60aa3c35c2 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1828,9 +1828,9 @@ static void end_bio_extent_preparewrite(struct bio *bio, int err) bio_put(bio); } -static struct bio * -extent_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs, - gfp_t gfp_flags) +struct bio * +btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs, + gfp_t gfp_flags) { struct bio *bio; @@ -1919,7 +1919,7 @@ static int submit_extent_page(int rw, struct extent_io_tree *tree, else nr = bio_get_nr_vecs(bdev); - bio = extent_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH); + bio = btrfs_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH); bio_add_page(bio, page, page_size, offset); bio->bi_end_io = end_io_func; diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index 1c6d4f342ef..4183c8178f0 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -310,4 +310,7 @@ int extent_clear_unlock_delalloc(struct inode *inode, struct extent_io_tree *tree, u64 start, u64 end, struct page *locked_page, unsigned long op); +struct bio * +btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs, + gfp_t gfp_flags); #endif -- cgit v1.2.3-70-g09d2 From e65e1535542931e51189832264cd282e5899e4b9 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 22 Nov 2010 03:04:43 +0000 Subject: btrfs: fix panic caused by direct IO btrfs paniced when we write >64KB data by direct IO at one time. Reproduce steps: # mkfs.btrfs /dev/sda5 /dev/sda6 # mount /dev/sda5 /mnt # dd if=/dev/zero of=/mnt/tmpfile bs=100K count=1 oflag=direct Then btrfs paniced: mapping failed logical 1103155200 bio len 69632 len 12288 ------------[ cut here ]------------ kernel BUG at fs/btrfs/volumes.c:3010! [SNIP] Pid: 1992, comm: btrfs-worker-0 Not tainted 2.6.37-rc1 #1 D2399/PRIMERGY RIP: 0010:[] [] btrfs_map_bio+0x202/0x210 [btrfs] [SNIP] Call Trace: [] __btrfs_submit_bio_done+0x1b/0x20 [btrfs] [] run_one_async_done+0x9f/0xb0 [btrfs] [] run_ordered_completions+0x80/0xc0 [btrfs] [] worker_loop+0x154/0x5f0 [btrfs] [] ? worker_loop+0x0/0x5f0 [btrfs] [] ? worker_loop+0x0/0x5f0 [btrfs] [] kthread+0x96/0xa0 [] kernel_thread_helper+0x4/0x10 [] ? kthread+0x0/0xa0 [] ? kernel_thread_helper+0x0/0x10 We fix this problem by splitting bios when we submit bios. Reported-by: Tsutomu Itoh Signed-off-by: Miao Xie Tested-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 205 +++++++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 184 insertions(+), 21 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8c027aa0020..a47e4faa8c4 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5535,13 +5535,21 @@ struct btrfs_dio_private { u64 bytes; u32 *csums; void *private; + + /* number of bios pending for this dio */ + atomic_t pending_bios; + + /* IO errors */ + int errors; + + struct bio *orig_bio; }; static void btrfs_endio_direct_read(struct bio *bio, int err) { + struct btrfs_dio_private *dip = bio->bi_private; struct bio_vec *bvec_end = bio->bi_io_vec + bio->bi_vcnt - 1; struct bio_vec *bvec = bio->bi_io_vec; - struct btrfs_dio_private *dip = bio->bi_private; struct inode *inode = dip->inode; struct btrfs_root *root = BTRFS_I(inode)->root; u64 start; @@ -5684,6 +5692,176 @@ static int __btrfs_submit_bio_start_direct_io(struct inode *inode, int rw, return 0; } +static void btrfs_end_dio_bio(struct bio *bio, int err) +{ + struct btrfs_dio_private *dip = bio->bi_private; + + if (err) { + printk(KERN_ERR "btrfs direct IO failed ino %lu rw %lu " + "disk_bytenr %lu len %u err no %d\n", + dip->inode->i_ino, bio->bi_rw, bio->bi_sector, + bio->bi_size, err); + dip->errors = 1; + + /* + * before atomic variable goto zero, we must make sure + * dip->errors is perceived to be set. + */ + smp_mb__before_atomic_dec(); + } + + /* if there are more bios still pending for this dio, just exit */ + if (!atomic_dec_and_test(&dip->pending_bios)) + goto out; + + if (dip->errors) + bio_io_error(dip->orig_bio); + else { + set_bit(BIO_UPTODATE, &dip->orig_bio->bi_flags); + bio_endio(dip->orig_bio, 0); + } +out: + bio_put(bio); +} + +static struct bio *btrfs_dio_bio_alloc(struct block_device *bdev, + u64 first_sector, gfp_t gfp_flags) +{ + int nr_vecs = bio_get_nr_vecs(bdev); + return btrfs_bio_alloc(bdev, first_sector, nr_vecs, gfp_flags); +} + +static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode, + int rw, u64 file_offset, int skip_sum, + u32 *csums) +{ + int write = rw & REQ_WRITE; + struct btrfs_root *root = BTRFS_I(inode)->root; + int ret; + + bio_get(bio); + ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0); + if (ret) + goto err; + + if (write && !skip_sum) { + ret = btrfs_wq_submit_bio(root->fs_info, + inode, rw, bio, 0, 0, + file_offset, + __btrfs_submit_bio_start_direct_io, + __btrfs_submit_bio_done); + goto err; + } else if (!skip_sum) + btrfs_lookup_bio_sums_dio(root, inode, bio, + file_offset, csums); + + ret = btrfs_map_bio(root, rw, bio, 0, 1); +err: + bio_put(bio); + return ret; +} + +static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip, + int skip_sum) +{ + struct inode *inode = dip->inode; + struct btrfs_root *root = BTRFS_I(inode)->root; + struct btrfs_mapping_tree *map_tree = &root->fs_info->mapping_tree; + struct bio *bio; + struct bio *orig_bio = dip->orig_bio; + struct bio_vec *bvec = orig_bio->bi_io_vec; + u64 start_sector = orig_bio->bi_sector; + u64 file_offset = dip->logical_offset; + u64 submit_len = 0; + u64 map_length; + int nr_pages = 0; + u32 *csums = dip->csums; + int ret = 0; + + bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev, start_sector, GFP_NOFS); + if (!bio) + return -ENOMEM; + bio->bi_private = dip; + bio->bi_end_io = btrfs_end_dio_bio; + atomic_inc(&dip->pending_bios); + + map_length = orig_bio->bi_size; + ret = btrfs_map_block(map_tree, READ, start_sector << 9, + &map_length, NULL, 0); + if (ret) { + bio_put(bio); + return -EIO; + } + + while (bvec <= (orig_bio->bi_io_vec + orig_bio->bi_vcnt - 1)) { + if (unlikely(map_length < submit_len + bvec->bv_len || + bio_add_page(bio, bvec->bv_page, bvec->bv_len, + bvec->bv_offset) < bvec->bv_len)) { + /* + * inc the count before we submit the bio so + * we know the end IO handler won't happen before + * we inc the count. Otherwise, the dip might get freed + * before we're done setting it up + */ + atomic_inc(&dip->pending_bios); + ret = __btrfs_submit_dio_bio(bio, inode, rw, + file_offset, skip_sum, + csums); + if (ret) { + bio_put(bio); + atomic_dec(&dip->pending_bios); + goto out_err; + } + + if (!skip_sum) + csums = csums + nr_pages; + start_sector += submit_len >> 9; + file_offset += submit_len; + + submit_len = 0; + nr_pages = 0; + + bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev, + start_sector, GFP_NOFS); + if (!bio) + goto out_err; + bio->bi_private = dip; + bio->bi_end_io = btrfs_end_dio_bio; + + map_length = orig_bio->bi_size; + ret = btrfs_map_block(map_tree, READ, start_sector << 9, + &map_length, NULL, 0); + if (ret) { + bio_put(bio); + goto out_err; + } + } else { + submit_len += bvec->bv_len; + nr_pages ++; + bvec++; + } + } + + ret = __btrfs_submit_dio_bio(bio, inode, rw, file_offset, skip_sum, + csums); + if (!ret) + return 0; + + bio_put(bio); +out_err: + dip->errors = 1; + /* + * before atomic variable goto zero, we must + * make sure dip->errors is perceived to be set. + */ + smp_mb__before_atomic_dec(); + if (atomic_dec_and_test(&dip->pending_bios)) + bio_io_error(dip->orig_bio); + + /* bio_end_io() will handle error, so we needn't return it */ + return 0; +} + static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode, loff_t file_offset) { @@ -5723,33 +5901,18 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode, dip->disk_bytenr = (u64)bio->bi_sector << 9; bio->bi_private = dip; + dip->errors = 0; + dip->orig_bio = bio; + atomic_set(&dip->pending_bios, 0); if (write) bio->bi_end_io = btrfs_endio_direct_write; else bio->bi_end_io = btrfs_endio_direct_read; - ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0); - if (ret) - goto free_ordered; - - if (write && !skip_sum) { - ret = btrfs_wq_submit_bio(BTRFS_I(inode)->root->fs_info, - inode, rw, bio, 0, 0, - dip->logical_offset, - __btrfs_submit_bio_start_direct_io, - __btrfs_submit_bio_done); - if (ret) - goto free_ordered; + ret = btrfs_submit_direct_hook(rw, dip, skip_sum); + if (!ret) return; - } else if (!skip_sum) - btrfs_lookup_bio_sums_dio(root, inode, bio, - dip->logical_offset, dip->csums); - - ret = btrfs_map_bio(root, rw, bio, 0, 1); - if (ret) - goto free_ordered; - return; free_ordered: /* * If this is a write, we need to clean up the reserved space and kill -- cgit v1.2.3-70-g09d2 From 6f33434850ed87dc5e56b60ebbad3d3cf405f296 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Fri, 12 Nov 2010 23:17:56 +0000 Subject: btrfs: Fix early enospc because 'unused' calculated with wrong sign. 'unused' calculated with wrong sign in reserve_metadata_bytes(). This might have lead to unwanted over-reservations. Signed-off-by: Arne Jansen Reviewed-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index a541bc87f04..ddaf6340fe7 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3413,7 +3413,7 @@ again: * our reservation. */ if (unused <= space_info->total_bytes) { - unused -= space_info->total_bytes; + unused = space_info->total_bytes - unused; if (unused >= num_bytes) { if (!reserved) space_info->bytes_reserved += orig_bytes; -- cgit v1.2.3-70-g09d2 From 0de90876c6cb774d4a424dafc1fc9ec50071b81b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 19 Nov 2010 13:40:41 +0000 Subject: Btrfs: handle the space_cache option properly When I added the clear_cache option I screwed up and took the break out of the space_cache case statement, so whenever you mount with space_cache you also get clear_cache, which does you no good if you say set space_cache in fstab so it always gets set. This patch adds the break back in properly. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/super.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 718b10de204..66e4612a791 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -244,6 +244,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) case Opt_space_cache: printk(KERN_INFO "btrfs: enabling disk space caching\n"); btrfs_set_opt(info->mount_opt, SPACE_CACHE); + break; case Opt_clear_cache: printk(KERN_INFO "btrfs: force clearing of disk cache\n"); btrfs_set_opt(info->mount_opt, CLEAR_CACHE); -- cgit v1.2.3-70-g09d2 From 2a6b8daedaf3682bed3fc1d4e2390491f6e19c49 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 19 Nov 2010 01:36:10 +0000 Subject: btrfs: Check if dest_offset is block-size aligned before cloning file We've done the check for src_offset and src_length, and We should also check dest_offset, otherwise we'll corrupt the destination file: (After cloning file1 to file2 with unaligned dest_offset) # cat /mnt/file2 cat: /mnt/file2: Input/output error Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 463d91b4dd3..81b47bd8a55 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1669,12 +1669,11 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, olen = len = src->i_size - off; /* if we extend to eof, continue to block boundary */ if (off + len == src->i_size) - len = ((src->i_size + bs-1) & ~(bs-1)) - - off; + len = ALIGN(src->i_size, bs) - off; /* verify the end result is block aligned */ - if ((off & (bs-1)) || - ((off + len) & (bs-1))) + if (!IS_ALIGNED(off, bs) || !IS_ALIGNED(off + len, bs) || + !IS_ALIGNED(destoff, bs)) goto out_unlock; /* do any pending delalloc/csum calc on src, one way or -- cgit v1.2.3-70-g09d2 From 5f3888ff6f0b9dce60705765752b788a92557644 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 19 Nov 2010 01:36:34 +0000 Subject: btrfs: Set file size correctly in file clone Set src_offset = 0, src_length = 20K, dest_offset = 20K. And the original filesize of the dest file 'file2' is 30K: # ls -l /mnt/file2 -rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2 Now clone file1 to file2, the dest file should be 40K, but it still shows 30K: # ls -l /mnt/file2 -rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2 Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 81b47bd8a55..6b4bfa72bf8 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1873,8 +1873,8 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, * but shouldn't round up the file size */ endoff = new_key.offset + datal; - if (endoff > off+olen) - endoff = off+olen; + if (endoff > destoff+olen) + endoff = destoff+olen; if (endoff > inode->i_size) btrfs_i_size_write(inode, endoff); -- cgit v1.2.3-70-g09d2 From f209561ad83c5ffd561dc4bc3a3c90b704fe9231 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 19 Nov 2010 02:05:24 +0000 Subject: btrfs: Show device attr correctly for symlinks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Symlinks and files of other types show different device numbers, though they are on the same partition: $ touch tmp; ln -s tmp tmp2; stat tmp tmp2 File: `tmp' Size: 0 Blocks: 0 IO Block: 4096 regular empty file Device: 15h/21d Inode: 984027 Links: 1 --- snip --- File: `tmp2' -> `tmp' Size: 3 Blocks: 0 IO Block: 4096 symbolic link Device: 13h/19d Inode: 984028 Links: 1 Reported-by: Toke Høiland-Jørgensen Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index a47e4faa8c4..eed357ff6c9 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7299,6 +7299,7 @@ static const struct inode_operations btrfs_symlink_inode_operations = { .readlink = generic_readlink, .follow_link = page_follow_link_light, .put_link = page_put_link, + .getattr = btrfs_getattr, .permission = btrfs_permission, .setxattr = btrfs_setxattr, .getxattr = btrfs_getxattr, -- cgit v1.2.3-70-g09d2 From 0410c94aff109c02b6774a0ed00114987cda7ce5 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Sat, 20 Nov 2010 12:03:07 +0000 Subject: btrfs: make 1-bit signed fileds unsigned Fixes these sparse warnings: fs/btrfs/ctree.h:811:17: error: dubious one-bit signed bitfield fs/btrfs/ctree.h:812:20: error: dubious one-bit signed bitfield fs/btrfs/ctree.h:813:19: error: dubious one-bit signed bitfield Signed-off-by: Mariusz Kozlowski Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 8db9234f6b4..af52f6d7a4d 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -808,9 +808,9 @@ struct btrfs_block_group_cache { int extents_thresh; int free_extents; int total_bitmaps; - int ro:1; - int dirty:1; - int iref:1; + unsigned int ro:1; + unsigned int dirty:1; + unsigned int iref:1; int disk_cache_state; -- cgit v1.2.3-70-g09d2 From 2ede0daf01549cecf4bb0962c46dc47382047523 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 17 Nov 2010 18:54:54 +0000 Subject: Btrfs: handle NFS lookups properly People kept reporting NFS issues, specifically getting ESTALE alot. I figured out how to reproduce the problem SERVER mkfs.btrfs /dev/sda1 mount /dev/sda1 /mnt/btrfs-test btrfs subvol create /mnt/btrfs-test/foo service nfs start CLIENT mount server:/mnt/btrfs /mnt/test cd /mnt/test/foo ls SERVER echo 3 > /proc/sys/vm/drop_caches CLIENT ls <-- get an ESTALE here This is because the standard way to lookup a name in nfsd is to use readdir, and what it does is do a readdir on the parent directory looking for the inode of the child. So in this case the parent being / and the child being foo. Well subvols all have the same inode number, so doing a readdir of / looking for inode 256 will return '.', which obviously doesn't match foo. So instead we need to have our own .get_name so that we can find the right name. Our .get_name will either lookup the inode backref or the root backref, whichever we're looking for, and return the name we find. Running the above reproducer with this patch results in everything acting the way its supposed to. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/export.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) diff --git a/fs/btrfs/export.c b/fs/btrfs/export.c index 951ef09b82f..6f044447359 100644 --- a/fs/btrfs/export.c +++ b/fs/btrfs/export.c @@ -232,9 +232,85 @@ fail: return ERR_PTR(ret); } +static int btrfs_get_name(struct dentry *parent, char *name, + struct dentry *child) +{ + struct inode *inode = child->d_inode; + struct inode *dir = parent->d_inode; + struct btrfs_path *path; + struct btrfs_root *root = BTRFS_I(dir)->root; + struct btrfs_inode_ref *iref; + struct btrfs_root_ref *rref; + struct extent_buffer *leaf; + unsigned long name_ptr; + struct btrfs_key key; + int name_len; + int ret; + + if (!dir || !inode) + return -EINVAL; + + if (!S_ISDIR(dir->i_mode)) + return -EINVAL; + + path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; + path->leave_spinning = 1; + + if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) { + key.objectid = BTRFS_I(inode)->root->root_key.objectid; + key.type = BTRFS_ROOT_BACKREF_KEY; + key.offset = (u64)-1; + root = root->fs_info->tree_root; + } else { + key.objectid = inode->i_ino; + key.offset = dir->i_ino; + key.type = BTRFS_INODE_REF_KEY; + } + + ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); + if (ret < 0) { + btrfs_free_path(path); + return ret; + } else if (ret > 0) { + if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) { + path->slots[0]--; + } else { + btrfs_free_path(path); + return -ENOENT; + } + } + leaf = path->nodes[0]; + + if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) { + rref = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_root_ref); + name_ptr = (unsigned long)(rref + 1); + name_len = btrfs_root_ref_name_len(leaf, rref); + } else { + iref = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_inode_ref); + name_ptr = (unsigned long)(iref + 1); + name_len = btrfs_inode_ref_name_len(leaf, iref); + } + + read_extent_buffer(leaf, name, name_ptr, name_len); + btrfs_free_path(path); + + /* + * have to add the null termination to make sure that reconnect_path + * gets the right len for strlen + */ + name[name_len] = '\0'; + + return 0; +} + const struct export_operations btrfs_export_ops = { .encode_fh = btrfs_encode_fh, .fh_to_dentry = btrfs_fh_to_dentry, .fh_to_parent = btrfs_fh_to_parent, .get_parent = btrfs_get_parent, + .get_name = btrfs_get_name, }; -- cgit v1.2.3-70-g09d2 From 76195853903ca613ba722203db9b747d70478fc7 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 19 Nov 2010 02:18:02 +0000 Subject: Btrfs: fix more ESTALE problems with NFS When creating new inodes we don't setup inode->i_generation. So if we generate an fh with a newly created inode we save the generation of 0, but if we flush the inode to disk and have to read it back when getting the inode on the server we'll have the right i_generation, so gens wont match and we get ESTALE. This patch properly sets inode->i_generation when we create the new inode and now I'm no longer getting ESTALE. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index eed357ff6c9..fc22f556aa2 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4501,6 +4501,7 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans, BTRFS_I(inode)->index_cnt = 2; BTRFS_I(inode)->root = root; BTRFS_I(inode)->generation = trans->transid; + inode->i_generation = BTRFS_I(inode)->generation; btrfs_set_inode_space_info(root, inode); if (mode & S_IFDIR) -- cgit v1.2.3-70-g09d2 From 6a912213046ecb6511fdf35531a0c7de3de963c9 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Sat, 20 Nov 2010 09:48:00 +0000 Subject: Btrfs: use dget_parent where we can UPDATED There are lots of places where we do dentry->d_parent->d_inode without holding the dentry->d_lock. This could cause problems with rename. So instead we need to use dget_parent() and hold the reference to the parent as long as we are going to use it's inode and then dput it at the end. Signed-off-by: Josef Bacik Cc: raven@themaw.net Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 9 ++++++--- fs/btrfs/ioctl.c | 20 ++++++++++++++++---- fs/btrfs/transaction.c | 5 ++++- fs/btrfs/tree-log.c | 21 +++++++++++++++++---- 4 files changed, 43 insertions(+), 12 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index fc22f556aa2..c0faf47d0cd 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4811,10 +4811,12 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir, if (err) { drop_inode = 1; } else { + struct dentry *parent = dget_parent(dentry); btrfs_update_inode_block_group(trans, dir); err = btrfs_update_inode(trans, root, inode); BUG_ON(err); - btrfs_log_new_name(trans, inode, NULL, dentry->d_parent); + btrfs_log_new_name(trans, inode, NULL, parent); + dput(parent); } nr = trans->blocks_used; @@ -6768,8 +6770,9 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, BUG_ON(ret); if (old_inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) { - btrfs_log_new_name(trans, old_inode, old_dir, - new_dentry->d_parent); + struct dentry *parent = dget_parent(new_dentry); + btrfs_log_new_name(trans, old_inode, old_dir, parent); + dput(parent); btrfs_end_log_trans(root); } out_fail: diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 6b4bfa72bf8..f1c9bb4079e 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -233,7 +233,8 @@ static noinline int create_subvol(struct btrfs_root *root, struct btrfs_inode_item *inode_item; struct extent_buffer *leaf; struct btrfs_root *new_root; - struct inode *dir = dentry->d_parent->d_inode; + struct dentry *parent = dget_parent(dentry); + struct inode *dir; int ret; int err; u64 objectid; @@ -242,8 +243,13 @@ static noinline int create_subvol(struct btrfs_root *root, ret = btrfs_find_free_objectid(NULL, root->fs_info->tree_root, 0, &objectid); - if (ret) + if (ret) { + dput(parent); return ret; + } + + dir = parent->d_inode; + /* * 1 - inode item * 2 - refs @@ -251,8 +257,10 @@ static noinline int create_subvol(struct btrfs_root *root, * 2 - dir items */ trans = btrfs_start_transaction(root, 6); - if (IS_ERR(trans)) + if (IS_ERR(trans)) { + dput(parent); return PTR_ERR(trans); + } leaf = btrfs_alloc_free_block(trans, root, root->leafsize, 0, objectid, NULL, 0, 0, 0); @@ -339,6 +347,7 @@ static noinline int create_subvol(struct btrfs_root *root, d_instantiate(dentry, btrfs_lookup_dentry(dir, dentry)); fail: + dput(parent); if (async_transid) { *async_transid = trans->transid; err = btrfs_commit_transaction_async(trans, root, 1); @@ -354,6 +363,7 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry, char *name, int namelen, u64 *async_transid) { struct inode *inode; + struct dentry *parent; struct btrfs_pending_snapshot *pending_snapshot; struct btrfs_trans_handle *trans; int ret; @@ -396,7 +406,9 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry, btrfs_orphan_cleanup(pending_snapshot->snap); - inode = btrfs_lookup_dentry(dentry->d_parent->d_inode, dentry); + parent = dget_parent(dentry); + inode = btrfs_lookup_dentry(parent->d_inode, dentry); + dput(parent); if (IS_ERR(inode)) { ret = PTR_ERR(inode); goto fail; diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 1fffbc017bd..f50e931fc21 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -902,6 +902,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root *root = pending->root; struct btrfs_root *parent_root; struct inode *parent_inode; + struct dentry *parent; struct dentry *dentry; struct extent_buffer *tmp; struct extent_buffer *old; @@ -941,7 +942,8 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, trans->block_rsv = &pending->block_rsv; dentry = pending->dentry; - parent_inode = dentry->d_parent->d_inode; + parent = dget_parent(dentry); + parent_inode = parent->d_inode; parent_root = BTRFS_I(parent_inode)->root; record_root_in_trans(trans, parent_root); @@ -989,6 +991,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, parent_inode->i_ino, index, dentry->d_name.name, dentry->d_name.len); BUG_ON(ret); + dput(parent); key.offset = (u64)-1; pending->snap = btrfs_read_fs_root_no_name(root->fs_info, &key); diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index a29f19384a2..054744ac571 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -2869,6 +2869,7 @@ static noinline int check_parent_dirs_for_sync(struct btrfs_trans_handle *trans, { int ret = 0; struct btrfs_root *root; + struct dentry *old_parent = NULL; /* * for regular files, if its inode is already on disk, we don't @@ -2910,10 +2911,13 @@ static noinline int check_parent_dirs_for_sync(struct btrfs_trans_handle *trans, if (IS_ROOT(parent)) break; - parent = parent->d_parent; + parent = dget_parent(parent); + dput(old_parent); + old_parent = parent; inode = parent->d_inode; } + dput(old_parent); out: return ret; } @@ -2945,6 +2949,7 @@ int btrfs_log_inode_parent(struct btrfs_trans_handle *trans, { int inode_only = exists_only ? LOG_INODE_EXISTS : LOG_INODE_ALL; struct super_block *sb; + struct dentry *old_parent = NULL; int ret = 0; u64 last_committed = root->fs_info->last_trans_committed; @@ -3016,10 +3021,13 @@ int btrfs_log_inode_parent(struct btrfs_trans_handle *trans, if (IS_ROOT(parent)) break; - parent = parent->d_parent; + parent = dget_parent(parent); + dput(old_parent); + old_parent = parent; } ret = 0; end_trans: + dput(old_parent); if (ret < 0) { BUG_ON(ret != -ENOSPC); root->fs_info->last_trans_log_full_commit = trans->transid; @@ -3039,8 +3047,13 @@ end_no_trans: int btrfs_log_dentry_safe(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct dentry *dentry) { - return btrfs_log_inode_parent(trans, root, dentry->d_inode, - dentry->d_parent, 0); + struct dentry *parent = dget_parent(dentry); + int ret; + + ret = btrfs_log_inode_parent(trans, root, dentry->d_inode, parent, 0); + dput(parent); + + return ret; } /* -- cgit v1.2.3-70-g09d2 From 495e86779f4f319828bc10dfc0c9ac2161868077 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 19 Nov 2010 20:36:10 +0000 Subject: Btrfs: hold i_mutex when calling btrfs_log_dentry_safe Since we walk up the path logging all of the parts of the inode's path, we need to hold i_mutex to make sure that the inode is not renamed while we're logging everything. btrfs_log_dentry_safe does dget_parent and all of that jazz, but we may get unexpected results if the rename changes the inode's location while we're higher up the path logging those dentries, so do this for safety reasons. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/file.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index e354c33df08..c1faded5fca 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1047,8 +1047,14 @@ out: if ((file->f_flags & O_DSYNC) || IS_SYNC(inode)) { trans = btrfs_start_transaction(root, 0); + if (IS_ERR(trans)) { + num_written = PTR_ERR(trans); + goto done; + } + mutex_lock(&inode->i_mutex); ret = btrfs_log_dentry_safe(trans, root, file->f_dentry); + mutex_unlock(&inode->i_mutex); if (ret == 0) { ret = btrfs_sync_log(trans, root); if (ret == 0) @@ -1067,6 +1073,7 @@ out: (start_pos + num_written - 1) >> PAGE_CACHE_SHIFT); } } +done: current->backing_dev_info = NULL; return num_written ? num_written : err; } -- cgit v1.2.3-70-g09d2 From a1b075d28da563c5e2325577f282c042494254ba Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 19 Nov 2010 20:36:11 +0000 Subject: Btrfs: make btrfs_add_nondir take parent inode as an argument Everybody who calls btrfs_add_nondir just passes in the dentry of the new file and then dereference dentry->d_parent->d_inode, but everybody who calls btrfs_add_nondir() are already passed the parent's inode. So instead of dereferencing dentry->d_parent, just make btrfs_add_nondir take the dir inode as an argument and pass that along so we don't have to worry about d_parent. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 38 ++++++++++++++++---------------------- 1 file changed, 16 insertions(+), 22 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index c0faf47d0cd..37cc1776a5d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4623,12 +4623,12 @@ int btrfs_add_link(struct btrfs_trans_handle *trans, } static int btrfs_add_nondir(struct btrfs_trans_handle *trans, - struct dentry *dentry, struct inode *inode, - int backref, u64 index) + struct inode *dir, struct dentry *dentry, + struct inode *inode, int backref, u64 index) { - int err = btrfs_add_link(trans, dentry->d_parent->d_inode, - inode, dentry->d_name.name, - dentry->d_name.len, backref, index); + int err = btrfs_add_link(trans, dir, inode, + dentry->d_name.name, dentry->d_name.len, + backref, index); if (!err) { d_instantiate(dentry, inode); return 0; @@ -4669,8 +4669,7 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, btrfs_set_trans_block_group(trans, dir); inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, - dentry->d_name.len, - dentry->d_parent->d_inode->i_ino, objectid, + dentry->d_name.len, dir->i_ino, objectid, BTRFS_I(dir)->block_group, mode, &index); err = PTR_ERR(inode); if (IS_ERR(inode)) @@ -4683,7 +4682,7 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, } btrfs_set_trans_block_group(trans, inode); - err = btrfs_add_nondir(trans, dentry, inode, 0, index); + err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; else { @@ -4731,10 +4730,8 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, btrfs_set_trans_block_group(trans, dir); inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, - dentry->d_name.len, - dentry->d_parent->d_inode->i_ino, - objectid, BTRFS_I(dir)->block_group, mode, - &index); + dentry->d_name.len, dir->i_ino, objectid, + BTRFS_I(dir)->block_group, mode, &index); err = PTR_ERR(inode); if (IS_ERR(inode)) goto out_unlock; @@ -4746,7 +4743,7 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, } btrfs_set_trans_block_group(trans, inode); - err = btrfs_add_nondir(trans, dentry, inode, 0, index); + err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; else { @@ -4806,7 +4803,7 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir, btrfs_set_trans_block_group(trans, dir); atomic_inc(&inode->i_count); - err = btrfs_add_nondir(trans, dentry, inode, 1, index); + err = btrfs_add_nondir(trans, dir, dentry, inode, 1, index); if (err) { drop_inode = 1; @@ -4856,8 +4853,7 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) btrfs_set_trans_block_group(trans, dir); inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, - dentry->d_name.len, - dentry->d_parent->d_inode->i_ino, objectid, + dentry->d_name.len, dir->i_ino, objectid, BTRFS_I(dir)->block_group, S_IFDIR | mode, &index); if (IS_ERR(inode)) { @@ -4880,9 +4876,8 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) if (err) goto out_fail; - err = btrfs_add_link(trans, dentry->d_parent->d_inode, - inode, dentry->d_name.name, - dentry->d_name.len, 0, index); + err = btrfs_add_link(trans, dir, inode, dentry->d_name.name, + dentry->d_name.len, 0, index); if (err) goto out_fail; @@ -6922,8 +6917,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, btrfs_set_trans_block_group(trans, dir); inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, - dentry->d_name.len, - dentry->d_parent->d_inode->i_ino, objectid, + dentry->d_name.len, dir->i_ino, objectid, BTRFS_I(dir)->block_group, S_IFLNK|S_IRWXUGO, &index); err = PTR_ERR(inode); @@ -6937,7 +6931,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, } btrfs_set_trans_block_group(trans, inode); - err = btrfs_add_nondir(trans, dentry, inode, 0, index); + err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; else { -- cgit v1.2.3-70-g09d2 From 45f49bce99d008d6864a20324548f35936ba46fb Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Sun, 21 Nov 2010 22:27:44 -0500 Subject: Btrfs: avoid NULL pointer deref in try_release_extent_buffer If we fail to find a pointer in the radix tree, don't try to deref the NULL one we do have. Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index f60aa3c35c2..143d3f541d6 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3837,8 +3837,10 @@ int try_release_extent_buffer(struct extent_io_tree *tree, struct page *page) spin_lock(&tree->buffer_lock); eb = radix_tree_lookup(&tree->buffer, start >> PAGE_CACHE_SHIFT); - if (!eb) - goto out; + if (!eb) { + spin_unlock(&tree->buffer_lock); + return ret; + } if (test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) { ret = 0; -- cgit v1.2.3-70-g09d2 From 92d2711f5dc15bf956546923a5718e74853f9912 Mon Sep 17 00:00:00 2001 From: Hema Kalliguddi Date: Mon, 15 Nov 2010 04:24:01 -0600 Subject: usb: musb: unmap dma buffer when switching to PIO Buffer is mapped to dma when dma channel is allocated. If, for some reason, dma channel programming fails, musb code will fallback to PIO mode to transfer that request. In that case, we need to unmap the buffer back to CPU. MUSB RTL1.8 and above cannot handle buffers which are not 32bit aligned. That happens to every request sent by g_ether gadget driver. Since the buffer sent was unaligned, we need to fallback to PIO. Because of that, g_ether was failing due to missing buffer unmapping. With this patch and [1] g_ether works fine with all MUSB revisions. Verified with OMAP3630 board, which has MUSB RTL1.8 using g_ether and g_zero. [1] http://www.spinics.net/lists/linux-usb/msg38400.html Signed-off-by: Hema HK Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 117 ++++++++++++++++++++++++++++------------- 1 file changed, 79 insertions(+), 38 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 36cfd060dbe..0169dcf3a6f 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -92,6 +92,59 @@ /* ----------------------------------------------------------------------- */ +/* Maps the buffer to dma */ + +static inline void map_dma_buffer(struct musb_request *request, + struct musb *musb) +{ + if (request->request.dma == DMA_ADDR_INVALID) { + request->request.dma = dma_map_single( + musb->controller, + request->request.buf, + request->request.length, + request->tx + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + request->mapped = 1; + } else { + dma_sync_single_for_device(musb->controller, + request->request.dma, + request->request.length, + request->tx + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + request->mapped = 0; + } +} + +/* Unmap the buffer from dma and maps it back to cpu */ +static inline void unmap_dma_buffer(struct musb_request *request, + struct musb *musb) +{ + if (request->request.dma == DMA_ADDR_INVALID) { + DBG(20, "not unmapping a never mapped buffer\n"); + return; + } + if (request->mapped) { + dma_unmap_single(musb->controller, + request->request.dma, + request->request.length, + request->tx + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + request->request.dma = DMA_ADDR_INVALID; + request->mapped = 0; + } else { + dma_sync_single_for_cpu(musb->controller, + request->request.dma, + request->request.length, + request->tx + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + + } +} + /* * Immediately complete a request. * @@ -119,24 +172,8 @@ __acquires(ep->musb->lock) ep->busy = 1; spin_unlock(&musb->lock); - if (is_dma_capable()) { - if (req->mapped) { - dma_unmap_single(musb->controller, - req->request.dma, - req->request.length, - req->tx - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - req->request.dma = DMA_ADDR_INVALID; - req->mapped = 0; - } else if (req->request.dma != DMA_ADDR_INVALID) - dma_sync_single_for_cpu(musb->controller, - req->request.dma, - req->request.length, - req->tx - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - } + if (is_dma_capable() && ep->dma) + unmap_dma_buffer(req, musb); if (request->status == 0) DBG(5, "%s done request %p, %d/%d\n", ep->end_point.name, request, @@ -395,6 +432,13 @@ static void txstate(struct musb *musb, struct musb_request *req) #endif if (!use_dma) { + /* + * Unmap the dma buffer back to cpu if dma channel + * programming fails + */ + if (is_dma_capable() && musb_ep->dma) + unmap_dma_buffer(req, musb); + musb_write_fifo(musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); request->actual += fifo_count; @@ -713,6 +757,20 @@ static void rxstate(struct musb *musb, struct musb_request *req) return; } #endif + /* + * Unmap the dma buffer back to cpu if dma channel + * programming fails. This buffer is mapped if the + * channel allocation is successful + */ + if (is_dma_capable() && musb_ep->dma) { + unmap_dma_buffer(req, musb); + + /* Clear DMAENAB for the + * PIO mode transfer + */ + csr &= ~MUSB_RXCSR_DMAENAB; + musb_writew(epio, MUSB_RXCSR, csr); + } musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); @@ -1150,26 +1208,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, request->epnum = musb_ep->current_epnum; request->tx = musb_ep->is_in; - if (is_dma_capable() && musb_ep->dma) { - if (request->request.dma == DMA_ADDR_INVALID) { - request->request.dma = dma_map_single( - musb->controller, - request->request.buf, - request->request.length, - request->tx - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - request->mapped = 1; - } else { - dma_sync_single_for_device(musb->controller, - request->request.dma, - request->request.length, - request->tx - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - request->mapped = 0; - } - } else + if (is_dma_capable() && musb_ep->dma) + map_dma_buffer(request, musb); + else request->mapped = 0; spin_lock_irqsave(&musb->lock, lockflags); -- cgit v1.2.3-70-g09d2 From e75df37165c639b06213ec88b4763c3e50a7f079 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 16 Nov 2010 23:37:37 +0800 Subject: usb: musb: clear RXCSR_AUTOCLEAR before PIO read If RXCSR_AUTOCLEAR flag is not cleard before PIO reading, one packet may be recieved by musb fifo, but no chance to notify software, so cause packet loss, follows the detailed process: - PIO read one packet - musb fifo auto clear the MUSB_RXCSR_RXPKTRDY - musb continue to recieve the next packet, and MUSB_RXCSR_RXPKTRDY is set - software clear the MUSB_RXCSR_RXPKTRDY, so there is no chance for musb to notify software that the 2nd recieved packet. The patch does fix the g_ether issue below: - use fifo_mode 3 to enable double buffer - 'ping -s 1024 IP_OF_BEAGLE_XM' - one usb packet of 512 byte is lost, so ping failed, which can be observed by wireshark note: Beagle xm takes musb rtl1.8 and may fallback to pio mode for unaligned buffer. Signed-off-by: Ming Lei Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 0169dcf3a6f..363cfad003f 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -765,10 +765,11 @@ static void rxstate(struct musb *musb, struct musb_request *req) if (is_dma_capable() && musb_ep->dma) { unmap_dma_buffer(req, musb); - /* Clear DMAENAB for the + /* + * Clear DMAENAB and AUTOCLEAR for the * PIO mode transfer */ - csr &= ~MUSB_RXCSR_DMAENAB; + csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR); musb_writew(epio, MUSB_RXCSR, csr); } -- cgit v1.2.3-70-g09d2 From bb324b08165d5656d221af013ed9994a54e455be Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 22 Nov 2010 14:22:41 +0530 Subject: usb: musb: gadget: fix compilation warning Fixes below compilation warning when musb driver is compiled for PIO mode: drivers/usb/musb/musb_gadget.c: In function 'musb_g_rx': drivers/usb/musb/musb_gadget.c:840: warning: label 'exit' defined but not used Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 363cfad003f..c8de0e123f2 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -896,7 +896,9 @@ void musb_g_rx(struct musb *musb, u8 epnum) if (!request) return; } +#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) exit: +#endif /* Analyze request */ rxstate(musb, to_musb_request(request)); } -- cgit v1.2.3-70-g09d2 From 07a8cdd2bb17a4da68136d963b8bc71959bd31a5 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Thu, 18 Nov 2010 18:54:17 +0530 Subject: usb: musb: do not use dma for control transfers The Inventra DMA engine used with the MUSB controller in many SoCs cannot use DMA for control transfers on EP0, but can use DMA for all other transfers. The USB core maps urbs for DMA if hcd->self.uses_dma is true. (hcd->self.uses_dma is true for MUSB as well). Split the uses_dma flag into two - one that says if the controller needs to use PIO for control transfers, and another which says if the controller uses DMA (for all other transfers). Also, populate this flag for all MUSB by default. (Tested on OMAP3 and OMAP4 boards, with EHCI and MUSB HCDs simultaneously in use). Signed-off-by: Maulik Mankad Signed-off-by: Santosh Shilimkar Signed-off-by: Anand Gadiyar Cc: Oliver Neukum Cc: Alan Stern Cc: Praveena NADAHALLY Cc: Ajay Kumar Gupta Signed-off-by: Felipe Balbi --- drivers/usb/core/hcd.c | 2 ++ drivers/usb/musb/musb_core.c | 3 +++ drivers/usb/musb/musb_gadget.c | 4 ++++ include/linux/usb.h | 4 ++++ 4 files changed, 13 insertions(+) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 61800f77dac..ced846ac414 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1330,6 +1330,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, */ if (usb_endpoint_xfer_control(&urb->ep->desc)) { + if (hcd->self.uses_pio_for_control) + return ret; if (hcd->self.uses_dma) { urb->setup_dma = dma_map_single( hcd->self.controller, diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index e6669fc3b80..99beebce855 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2116,12 +2116,15 @@ bad_config: * Otherwise, wait till the gadget driver hooks up. */ if (!is_otg_enabled(musb) && is_host_enabled(musb)) { + struct usb_hcd *hcd = musb_to_hcd(musb); + MUSB_HST_MODE(musb); musb->xceiv->default_a = 1; musb->xceiv->state = OTG_STATE_A_IDLE; status = usb_add_hcd(musb_to_hcd(musb), -1, 0); + hcd->self.uses_pio_for_control = 1; DBG(1, "%s mode, status %d, devctl %02x %c\n", "HOST", status, musb_readb(musb->mregs, MUSB_DEVCTL), diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index c8de0e123f2..9d6ade82b9f 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1833,6 +1833,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, spin_unlock_irqrestore(&musb->lock, flags); if (is_otg_enabled(musb)) { + struct usb_hcd *hcd = musb_to_hcd(musb); + DBG(3, "OTG startup...\n"); /* REVISIT: funcall to other code, which also @@ -1847,6 +1849,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, musb->gadget_driver = NULL; musb->g.dev.driver = NULL; spin_unlock_irqrestore(&musb->lock, flags); + } else { + hcd->self.uses_pio_for_control = 1; } } } diff --git a/include/linux/usb.h b/include/linux/usb.h index 24300d8a1bc..a28eb259257 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -313,6 +313,10 @@ struct usb_bus { int busnum; /* Bus number (in order of reg) */ const char *bus_name; /* stable id (PCI slot_name etc) */ u8 uses_dma; /* Does the host controller use DMA? */ + u8 uses_pio_for_control; /* + * Does the host controller use PIO + * for control transfers? + */ u8 otg_port; /* 0, or number of OTG/HNP port */ unsigned is_b_host:1; /* true during some HNP roleswitches */ unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */ -- cgit v1.2.3-70-g09d2 From 86e187ff9bce9fbed7bfed92ae34f491cf1af50f Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 6 Nov 2010 18:30:23 -0300 Subject: kconfig: add an option to determine a menu's visibility This option is aimed to add the possibility to control a menu's visibility without adding dependency to the expression to all the submenu. Signed-off-by: Arnaud Lacombe Acked-by: Mauro Carvalho Chehab Tested-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- scripts/kconfig/expr.h | 1 + scripts/kconfig/lkc.h | 1 + scripts/kconfig/menu.c | 11 +++++++++++ scripts/kconfig/zconf.gperf | 1 + scripts/kconfig/zconf.y | 21 ++++++++++++++++++--- 5 files changed, 32 insertions(+), 3 deletions(-) diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index 184eb6a0b50..e57826ced38 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -164,6 +164,7 @@ struct menu { struct menu *list; struct symbol *sym; struct property *prompt; + struct expr *visibility; struct expr *dep; unsigned int flags; char *help; diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h index 753cdbd7b80..3f7240df0f3 100644 --- a/scripts/kconfig/lkc.h +++ b/scripts/kconfig/lkc.h @@ -107,6 +107,7 @@ void menu_end_menu(void); void menu_add_entry(struct symbol *sym); void menu_end_entry(void); void menu_add_dep(struct expr *dep); +void menu_add_visibility(struct expr *dep); struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep); struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep); void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep); diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index 7e83aef42c6..b9d9aa18e6d 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -152,6 +152,12 @@ struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr return menu_add_prop(type, prompt, NULL, dep); } +void menu_add_visibility(struct expr *expr) +{ + current_entry->visibility = expr_alloc_and(current_entry->visibility, + expr); +} + void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep) { menu_add_prop(type, NULL, expr, dep); @@ -410,6 +416,11 @@ bool menu_is_visible(struct menu *menu) if (!menu->prompt) return false; + if (menu->visibility) { + if (expr_calc_value(menu->visibility) == no) + return no; + } + sym = menu->sym; if (sym) { sym_calc_value(sym); diff --git a/scripts/kconfig/zconf.gperf b/scripts/kconfig/zconf.gperf index d8bc7424962..c9e690eb754 100644 --- a/scripts/kconfig/zconf.gperf +++ b/scripts/kconfig/zconf.gperf @@ -38,6 +38,7 @@ hex, T_TYPE, TF_COMMAND, S_HEX string, T_TYPE, TF_COMMAND, S_STRING select, T_SELECT, TF_COMMAND range, T_RANGE, TF_COMMAND +visible, T_VISIBLE, TF_COMMAND option, T_OPTION, TF_COMMAND on, T_ON, TF_PARAM modules, T_OPT_MODULES, TF_OPTION diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index 2abd3c7ff15..49fb4ab664c 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -36,7 +36,7 @@ static struct menu *current_menu, *current_entry; #define YYERROR_VERBOSE #endif %} -%expect 28 +%expect 30 %union { @@ -68,6 +68,7 @@ static struct menu *current_menu, *current_entry; %token T_DEFAULT %token T_SELECT %token T_RANGE +%token T_VISIBLE %token T_OPTION %token T_ON %token T_WORD @@ -123,7 +124,7 @@ stmt_list: ; option_name: - T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT + T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT | T_VISIBLE ; common_stmt: @@ -359,7 +360,7 @@ menu: T_MENU prompt T_EOL printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno()); }; -menu_entry: menu depends_list +menu_entry: menu visibility_list depends_list { $$ = menu_add_menu(); }; @@ -430,6 +431,19 @@ depends: T_DEPENDS T_ON expr T_EOL printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno()); }; +/* visibility option */ + +visibility_list: + /* empty */ + | visibility_list visible + | visibility_list T_EOL +; + +visible: T_VISIBLE if_expr +{ + menu_add_visibility($2); +}; + /* prompt statement */ prompt_stmt_opt: @@ -526,6 +540,7 @@ static const char *zconf_tokenname(int token) case T_IF: return "if"; case T_ENDIF: return "endif"; case T_DEPENDS: return "depends"; + case T_VISIBLE: return "visible"; } return ""; } -- cgit v1.2.3-70-g09d2 From da79de97d254145dcb7c08c978b1093eac15ec9c Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 22 Nov 2010 11:12:46 +0000 Subject: drm/i915/sdvo: Only enable HDMI encodings only if the commandset is supported As we conflated intel_sdvo->is_hdmi with both having HDMI support on the ADD along with having HDMI support on the monitor, we would attempt to use HDMI encodings even if the interface did not support those commands. Reported-by: Simon Farnsworth Signed-off-by: Chris Wilson Tested-by: Simon Farnsworth Reviewed-by: Simon Farnsworth --- drivers/gpu/drm/i915/intel_sdvo.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index de158b76bcd..843182528b7 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -107,7 +107,8 @@ struct intel_sdvo { * This is set if we treat the device as HDMI, instead of DVI. */ bool is_hdmi; - bool has_audio; + bool has_hdmi_monitor; + bool has_hdmi_audio; /** * This is set if we detect output of sdvo device as LVDS and @@ -1023,7 +1024,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, if (!intel_sdvo_set_target_input(intel_sdvo)) return; - if (intel_sdvo->is_hdmi && + if (intel_sdvo->has_hdmi_monitor && !intel_sdvo_set_avi_infoframe(intel_sdvo)) return; @@ -1063,7 +1064,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, } if (intel_crtc->pipe == 1) sdvox |= SDVO_PIPE_B_SELECT; - if (intel_sdvo->has_audio) + if (intel_sdvo->has_hdmi_audio) sdvox |= SDVO_AUDIO_ENABLE; if (INTEL_INFO(dev)->gen >= 4) { @@ -1388,8 +1389,10 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector) /* DDC bus is shared, match EDID to connector type */ if (edid->input & DRM_EDID_INPUT_DIGITAL) { status = connector_status_connected; - intel_sdvo->is_hdmi = drm_detect_hdmi_monitor(edid); - intel_sdvo->has_audio = drm_detect_monitor_audio(edid); + if (intel_sdvo->is_hdmi) { + intel_sdvo->has_hdmi_monitor = drm_detect_hdmi_monitor(edid); + intel_sdvo->has_hdmi_audio = drm_detect_monitor_audio(edid); + } } connector->display_info.raw_edid = NULL; kfree(edid); @@ -1398,7 +1401,7 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector) if (status == connector_status_connected) { struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); if (intel_sdvo_connector->force_audio) - intel_sdvo->has_audio = intel_sdvo_connector->force_audio > 0; + intel_sdvo->has_hdmi_audio = intel_sdvo_connector->force_audio > 0; } return status; @@ -1713,12 +1716,12 @@ intel_sdvo_set_property(struct drm_connector *connector, intel_sdvo_connector->force_audio = val; - if (val > 0 && intel_sdvo->has_audio) + if (val > 0 && intel_sdvo->has_hdmi_audio) return 0; - if (val < 0 && !intel_sdvo->has_audio) + if (val < 0 && !intel_sdvo->has_hdmi_audio) return 0; - intel_sdvo->has_audio = val > 0; + intel_sdvo->has_hdmi_audio = val > 0; goto done; } @@ -2070,6 +2073,8 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device) intel_sdvo_set_colorimetry(intel_sdvo, SDVO_COLORIMETRY_RGB256); connector->connector_type = DRM_MODE_CONNECTOR_HDMIA; + + intel_sdvo_add_hdmi_properties(intel_sdvo_connector); intel_sdvo->is_hdmi = true; } intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) | @@ -2077,8 +2082,6 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device) intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); - intel_sdvo_add_hdmi_properties(intel_sdvo_connector); - return true; } -- cgit v1.2.3-70-g09d2 From 09899c93b183870b122c94317f63344df43368e9 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 6 Nov 2010 18:30:24 -0300 Subject: kconfig: regen parser Signed-off-by: Arnaud Lacombe Signed-off-by: Mauro Carvalho Chehab --- scripts/kconfig/zconf.hash.c_shipped | 122 ++++---- scripts/kconfig/zconf.tab.c_shipped | 570 ++++++++++++++++++----------------- 2 files changed, 358 insertions(+), 334 deletions(-) diff --git a/scripts/kconfig/zconf.hash.c_shipped b/scripts/kconfig/zconf.hash.c_shipped index c1748faf463..4055d5de175 100644 --- a/scripts/kconfig/zconf.hash.c_shipped +++ b/scripts/kconfig/zconf.hash.c_shipped @@ -32,7 +32,7 @@ struct kconf_id; static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len); -/* maximum key range = 47, duplicates = 0 */ +/* maximum key range = 50, duplicates = 0 */ #ifdef __GNUC__ __inline @@ -46,32 +46,32 @@ kconf_id_hash (register const char *str, register unsigned int len) { static unsigned char asso_values[] = { - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 11, 5, - 0, 0, 5, 49, 5, 20, 49, 49, 5, 20, - 5, 0, 30, 49, 0, 15, 0, 10, 0, 49, - 25, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49 + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 40, 5, + 0, 0, 5, 52, 0, 20, 52, 52, 10, 20, + 5, 0, 35, 52, 0, 30, 0, 15, 0, 52, + 15, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52 }; register int hval = len; @@ -102,25 +102,26 @@ struct kconf_id_strings_t char kconf_id_strings_str12[sizeof("default")]; char kconf_id_strings_str13[sizeof("def_bool")]; char kconf_id_strings_str14[sizeof("help")]; - char kconf_id_strings_str15[sizeof("bool")]; char kconf_id_strings_str16[sizeof("config")]; char kconf_id_strings_str17[sizeof("def_tristate")]; - char kconf_id_strings_str18[sizeof("boolean")]; + char kconf_id_strings_str18[sizeof("hex")]; char kconf_id_strings_str19[sizeof("defconfig_list")]; - char kconf_id_strings_str21[sizeof("string")]; char kconf_id_strings_str22[sizeof("if")]; char kconf_id_strings_str23[sizeof("int")]; - char kconf_id_strings_str26[sizeof("select")]; char kconf_id_strings_str27[sizeof("modules")]; char kconf_id_strings_str28[sizeof("tristate")]; char kconf_id_strings_str29[sizeof("menu")]; - char kconf_id_strings_str31[sizeof("source")]; char kconf_id_strings_str32[sizeof("comment")]; - char kconf_id_strings_str33[sizeof("hex")]; char kconf_id_strings_str35[sizeof("menuconfig")]; - char kconf_id_strings_str36[sizeof("prompt")]; - char kconf_id_strings_str37[sizeof("depends")]; + char kconf_id_strings_str36[sizeof("string")]; + char kconf_id_strings_str37[sizeof("visible")]; + char kconf_id_strings_str41[sizeof("prompt")]; + char kconf_id_strings_str42[sizeof("depends")]; + char kconf_id_strings_str44[sizeof("bool")]; + char kconf_id_strings_str46[sizeof("select")]; + char kconf_id_strings_str47[sizeof("boolean")]; char kconf_id_strings_str48[sizeof("mainmenu")]; + char kconf_id_strings_str51[sizeof("source")]; }; static struct kconf_id_strings_t kconf_id_strings_contents = { @@ -136,25 +137,26 @@ static struct kconf_id_strings_t kconf_id_strings_contents = "default", "def_bool", "help", - "bool", "config", "def_tristate", - "boolean", + "hex", "defconfig_list", - "string", "if", "int", - "select", "modules", "tristate", "menu", - "source", "comment", - "hex", "menuconfig", + "string", + "visible", "prompt", "depends", - "mainmenu" + "bool", + "select", + "boolean", + "mainmenu", + "source" }; #define kconf_id_strings ((const char *) &kconf_id_strings_contents) #ifdef __GNUC__ @@ -168,11 +170,11 @@ kconf_id_lookup (register const char *str, register unsigned int len) { enum { - TOTAL_KEYWORDS = 31, + TOTAL_KEYWORDS = 32, MIN_WORD_LENGTH = 2, MAX_WORD_LENGTH = 14, MIN_HASH_VALUE = 2, - MAX_HASH_VALUE = 48 + MAX_HASH_VALUE = 51 }; static struct kconf_id wordlist[] = @@ -191,31 +193,35 @@ kconf_id_lookup (register const char *str, register unsigned int len) {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str12, T_DEFAULT, TF_COMMAND, S_UNKNOWN}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str13, T_DEFAULT, TF_COMMAND, S_BOOLEAN}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str14, T_HELP, TF_COMMAND}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str15, T_TYPE, TF_COMMAND, S_BOOLEAN}, + {-1}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str16, T_CONFIG, TF_COMMAND}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str17, T_DEFAULT, TF_COMMAND, S_TRISTATE}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_TYPE, TF_COMMAND, S_BOOLEAN}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_TYPE, TF_COMMAND, S_HEX}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str19, T_OPT_DEFCONFIG_LIST,TF_OPTION}, - {-1}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str21, T_TYPE, TF_COMMAND, S_STRING}, + {-1}, {-1}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str22, T_IF, TF_COMMAND|TF_PARAM}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str23, T_TYPE, TF_COMMAND, S_INT}, - {-1}, {-1}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str26, T_SELECT, TF_COMMAND}, + {-1}, {-1}, {-1}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str27, T_OPT_MODULES, TF_OPTION}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str28, T_TYPE, TF_COMMAND, S_TRISTATE}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str29, T_MENU, TF_COMMAND}, - {-1}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str31, T_SOURCE, TF_COMMAND}, + {-1}, {-1}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str32, T_COMMENT, TF_COMMAND}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str33, T_TYPE, TF_COMMAND, S_HEX}, - {-1}, + {-1}, {-1}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str35, T_MENUCONFIG, TF_COMMAND}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_PROMPT, TF_COMMAND}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37, T_DEPENDS, TF_COMMAND}, - {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_TYPE, TF_COMMAND, S_STRING}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37, T_VISIBLE, TF_COMMAND}, + {-1}, {-1}, {-1}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str41, T_PROMPT, TF_COMMAND}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str42, T_DEPENDS, TF_COMMAND}, {-1}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48, T_MAINMENU, TF_COMMAND} + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str44, T_TYPE, TF_COMMAND, S_BOOLEAN}, + {-1}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str46, T_SELECT, TF_COMMAND}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str47, T_TYPE, TF_COMMAND, S_BOOLEAN}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48, T_MAINMENU, TF_COMMAND}, + {-1}, {-1}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str51, T_SOURCE, TF_COMMAND} }; if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped index 699d4b26518..4c5495ea205 100644 --- a/scripts/kconfig/zconf.tab.c_shipped +++ b/scripts/kconfig/zconf.tab.c_shipped @@ -160,18 +160,19 @@ static struct menu *current_menu, *current_entry; T_DEFAULT = 275, T_SELECT = 276, T_RANGE = 277, - T_OPTION = 278, - T_ON = 279, - T_WORD = 280, - T_WORD_QUOTE = 281, - T_UNEQUAL = 282, - T_CLOSE_PAREN = 283, - T_OPEN_PAREN = 284, - T_EOL = 285, - T_OR = 286, - T_AND = 287, - T_EQUAL = 288, - T_NOT = 289 + T_VISIBLE = 278, + T_OPTION = 279, + T_ON = 280, + T_WORD = 281, + T_WORD_QUOTE = 282, + T_UNEQUAL = 283, + T_CLOSE_PAREN = 284, + T_OPEN_PAREN = 285, + T_EOL = 286, + T_OR = 287, + T_AND = 288, + T_EQUAL = 289, + T_NOT = 290 }; #endif @@ -419,20 +420,20 @@ union yyalloc /* YYFINAL -- State number of the termination state. */ #define YYFINAL 11 /* YYLAST -- Last index in YYTABLE. */ -#define YYLAST 277 +#define YYLAST 290 /* YYNTOKENS -- Number of terminals. */ -#define YYNTOKENS 35 +#define YYNTOKENS 36 /* YYNNTS -- Number of nonterminals. */ -#define YYNNTS 48 +#define YYNNTS 50 /* YYNRULES -- Number of rules. */ -#define YYNRULES 113 +#define YYNRULES 118 /* YYNRULES -- Number of states. */ -#define YYNSTATES 185 +#define YYNSTATES 191 /* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ #define YYUNDEFTOK 2 -#define YYMAXUTOK 289 +#define YYMAXUTOK 290 #define YYTRANSLATE(YYX) \ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) @@ -468,7 +469,8 @@ static const yytype_uint8 yytranslate[] = 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, - 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 + 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, + 35 }; #if YYDEBUG @@ -478,72 +480,73 @@ static const yytype_uint16 yyprhs[] = { 0, 0, 3, 6, 8, 11, 13, 14, 17, 20, 23, 26, 31, 36, 40, 42, 44, 46, 48, 50, - 52, 54, 56, 58, 60, 62, 64, 66, 70, 73, - 77, 80, 84, 87, 88, 91, 94, 97, 100, 103, - 106, 110, 115, 120, 125, 131, 135, 136, 140, 141, - 144, 148, 151, 153, 157, 158, 161, 164, 167, 170, - 173, 178, 182, 185, 190, 191, 194, 198, 200, 204, - 205, 208, 211, 214, 218, 222, 225, 227, 231, 232, - 235, 238, 241, 245, 249, 252, 255, 258, 259, 262, - 265, 268, 273, 274, 277, 279, 281, 284, 287, 290, - 292, 295, 296, 299, 301, 305, 309, 313, 316, 320, - 324, 326, 328, 329 + 52, 54, 56, 58, 60, 62, 64, 66, 68, 72, + 75, 79, 82, 86, 89, 90, 93, 96, 99, 102, + 105, 108, 112, 117, 122, 127, 133, 137, 138, 142, + 143, 146, 150, 153, 155, 159, 160, 163, 166, 169, + 172, 175, 180, 184, 187, 192, 193, 196, 200, 202, + 206, 207, 210, 213, 216, 220, 224, 228, 230, 234, + 235, 238, 241, 244, 248, 252, 255, 258, 261, 262, + 265, 268, 271, 276, 277, 280, 283, 286, 287, 290, + 292, 294, 297, 300, 303, 305, 308, 309, 312, 314, + 318, 322, 326, 329, 333, 337, 339, 341, 342 }; /* YYRHS -- A `-1'-separated list of the rules' RHS. */ static const yytype_int8 yyrhs[] = { - 36, 0, -1, 78, 37, -1, 37, -1, 62, 38, - -1, 38, -1, -1, 38, 40, -1, 38, 54, -1, - 38, 66, -1, 38, 77, -1, 38, 25, 1, 30, - -1, 38, 39, 1, 30, -1, 38, 1, 30, -1, + 37, 0, -1, 81, 38, -1, 38, -1, 63, 39, + -1, 39, -1, -1, 39, 41, -1, 39, 55, -1, + 39, 67, -1, 39, 80, -1, 39, 26, 1, 31, + -1, 39, 40, 1, 31, -1, 39, 1, 31, -1, 16, -1, 18, -1, 19, -1, 21, -1, 17, -1, - 22, -1, 20, -1, 30, -1, 60, -1, 70, -1, - 43, -1, 45, -1, 68, -1, 25, 1, 30, -1, - 1, 30, -1, 10, 25, 30, -1, 42, 46, -1, - 11, 25, 30, -1, 44, 46, -1, -1, 46, 47, - -1, 46, 48, -1, 46, 74, -1, 46, 72, -1, - 46, 41, -1, 46, 30, -1, 19, 75, 30, -1, - 18, 76, 79, 30, -1, 20, 80, 79, 30, -1, - 21, 25, 79, 30, -1, 22, 81, 81, 79, 30, - -1, 23, 49, 30, -1, -1, 49, 25, 50, -1, - -1, 33, 76, -1, 7, 82, 30, -1, 51, 55, - -1, 77, -1, 52, 57, 53, -1, -1, 55, 56, - -1, 55, 74, -1, 55, 72, -1, 55, 30, -1, - 55, 41, -1, 18, 76, 79, 30, -1, 19, 75, - 30, -1, 17, 30, -1, 20, 25, 79, 30, -1, - -1, 57, 40, -1, 14, 80, 78, -1, 77, -1, - 58, 61, 59, -1, -1, 61, 40, -1, 61, 66, - -1, 61, 54, -1, 3, 76, 78, -1, 4, 76, - 30, -1, 63, 73, -1, 77, -1, 64, 67, 65, - -1, -1, 67, 40, -1, 67, 66, -1, 67, 54, - -1, 6, 76, 30, -1, 9, 76, 30, -1, 69, - 73, -1, 12, 30, -1, 71, 13, -1, -1, 73, - 74, -1, 73, 30, -1, 73, 41, -1, 16, 24, - 80, 30, -1, -1, 76, 79, -1, 25, -1, 26, - -1, 5, 30, -1, 8, 30, -1, 15, 30, -1, - 30, -1, 78, 30, -1, -1, 14, 80, -1, 81, - -1, 81, 33, 81, -1, 81, 27, 81, -1, 29, - 80, 28, -1, 34, 80, -1, 80, 31, 80, -1, - 80, 32, 80, -1, 25, -1, 26, -1, -1, 25, - -1 + 22, -1, 20, -1, 23, -1, 31, -1, 61, -1, + 71, -1, 44, -1, 46, -1, 69, -1, 26, 1, + 31, -1, 1, 31, -1, 10, 26, 31, -1, 43, + 47, -1, 11, 26, 31, -1, 45, 47, -1, -1, + 47, 48, -1, 47, 49, -1, 47, 75, -1, 47, + 73, -1, 47, 42, -1, 47, 31, -1, 19, 78, + 31, -1, 18, 79, 82, 31, -1, 20, 83, 82, + 31, -1, 21, 26, 82, 31, -1, 22, 84, 84, + 82, 31, -1, 24, 50, 31, -1, -1, 50, 26, + 51, -1, -1, 34, 79, -1, 7, 85, 31, -1, + 52, 56, -1, 80, -1, 53, 58, 54, -1, -1, + 56, 57, -1, 56, 75, -1, 56, 73, -1, 56, + 31, -1, 56, 42, -1, 18, 79, 82, 31, -1, + 19, 78, 31, -1, 17, 31, -1, 20, 26, 82, + 31, -1, -1, 58, 41, -1, 14, 83, 81, -1, + 80, -1, 59, 62, 60, -1, -1, 62, 41, -1, + 62, 67, -1, 62, 55, -1, 3, 79, 81, -1, + 4, 79, 31, -1, 64, 76, 74, -1, 80, -1, + 65, 68, 66, -1, -1, 68, 41, -1, 68, 67, + -1, 68, 55, -1, 6, 79, 31, -1, 9, 79, + 31, -1, 70, 74, -1, 12, 31, -1, 72, 13, + -1, -1, 74, 75, -1, 74, 31, -1, 74, 42, + -1, 16, 25, 83, 31, -1, -1, 76, 77, -1, + 76, 31, -1, 23, 82, -1, -1, 79, 82, -1, + 26, -1, 27, -1, 5, 31, -1, 8, 31, -1, + 15, 31, -1, 31, -1, 81, 31, -1, -1, 14, + 83, -1, 84, -1, 84, 34, 84, -1, 84, 28, + 84, -1, 30, 83, 29, -1, 35, 83, -1, 83, + 32, 83, -1, 83, 33, 83, -1, 26, -1, 27, + -1, -1, 26, -1 }; /* YYRLINE[YYN] -- source line where rule number YYN was defined. */ static const yytype_uint16 yyrline[] = { - 0, 107, 107, 107, 109, 109, 111, 113, 114, 115, - 116, 117, 118, 122, 126, 126, 126, 126, 126, 126, - 126, 130, 131, 132, 133, 134, 135, 139, 140, 146, - 154, 160, 168, 178, 180, 181, 182, 183, 184, 185, - 188, 196, 202, 212, 218, 224, 227, 229, 240, 241, - 246, 255, 260, 268, 271, 273, 274, 275, 276, 277, - 280, 286, 297, 303, 313, 315, 320, 328, 336, 339, - 341, 342, 343, 348, 355, 362, 367, 375, 378, 380, - 381, 382, 385, 393, 400, 407, 413, 420, 422, 423, - 424, 427, 435, 437, 442, 443, 446, 447, 448, 452, - 453, 456, 457, 460, 461, 462, 463, 464, 465, 466, - 469, 470, 473, 474 + 0, 108, 108, 108, 110, 110, 112, 114, 115, 116, + 117, 118, 119, 123, 127, 127, 127, 127, 127, 127, + 127, 127, 131, 132, 133, 134, 135, 136, 140, 141, + 147, 155, 161, 169, 179, 181, 182, 183, 184, 185, + 186, 189, 197, 203, 213, 219, 225, 228, 230, 241, + 242, 247, 256, 261, 269, 272, 274, 275, 276, 277, + 278, 281, 287, 298, 304, 314, 316, 321, 329, 337, + 340, 342, 343, 344, 349, 356, 363, 368, 376, 379, + 381, 382, 383, 386, 394, 401, 408, 414, 421, 423, + 424, 425, 428, 436, 438, 439, 442, 449, 451, 456, + 457, 460, 461, 462, 466, 467, 470, 471, 474, 475, + 476, 477, 478, 479, 480, 483, 484, 487, 488 }; #endif @@ -556,7 +559,7 @@ static const char *const yytname[] = "T_SOURCE", "T_CHOICE", "T_ENDCHOICE", "T_COMMENT", "T_CONFIG", "T_MENUCONFIG", "T_HELP", "T_HELPTEXT", "T_IF", "T_ENDIF", "T_DEPENDS", "T_OPTIONAL", "T_PROMPT", "T_TYPE", "T_DEFAULT", "T_SELECT", "T_RANGE", - "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL", + "T_VISIBLE", "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL", "T_CLOSE_PAREN", "T_OPEN_PAREN", "T_EOL", "T_OR", "T_AND", "T_EQUAL", "T_NOT", "$accept", "input", "start", "stmt_list", "option_name", "common_stmt", "option_error", "config_entry_start", "config_stmt", @@ -567,8 +570,8 @@ static const char *const yytname[] = "if_entry", "if_end", "if_stmt", "if_block", "mainmenu_stmt", "menu", "menu_entry", "menu_end", "menu_stmt", "menu_block", "source_stmt", "comment", "comment_stmt", "help_start", "help", "depends_list", - "depends", "prompt_stmt_opt", "prompt", "end", "nl", "if_expr", "expr", - "symbol", "word_opt", 0 + "depends", "visibility_list", "visible", "prompt_stmt_opt", "prompt", + "end", "nl", "if_expr", "expr", "symbol", "word_opt", 0 }; #endif @@ -580,25 +583,25 @@ static const yytype_uint16 yytoknum[] = 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 280, 281, 282, 283, 284, - 285, 286, 287, 288, 289 + 285, 286, 287, 288, 289, 290 }; # endif /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ static const yytype_uint8 yyr1[] = { - 0, 35, 36, 36, 37, 37, 38, 38, 38, 38, - 38, 38, 38, 38, 39, 39, 39, 39, 39, 39, - 39, 40, 40, 40, 40, 40, 40, 41, 41, 42, - 43, 44, 45, 46, 46, 46, 46, 46, 46, 46, - 47, 47, 47, 47, 47, 48, 49, 49, 50, 50, - 51, 52, 53, 54, 55, 55, 55, 55, 55, 55, - 56, 56, 56, 56, 57, 57, 58, 59, 60, 61, - 61, 61, 61, 62, 63, 64, 65, 66, 67, 67, - 67, 67, 68, 69, 70, 71, 72, 73, 73, 73, - 73, 74, 75, 75, 76, 76, 77, 77, 77, 78, - 78, 79, 79, 80, 80, 80, 80, 80, 80, 80, - 81, 81, 82, 82 + 0, 36, 37, 37, 38, 38, 39, 39, 39, 39, + 39, 39, 39, 39, 40, 40, 40, 40, 40, 40, + 40, 40, 41, 41, 41, 41, 41, 41, 42, 42, + 43, 44, 45, 46, 47, 47, 47, 47, 47, 47, + 47, 48, 48, 48, 48, 48, 49, 50, 50, 51, + 51, 52, 53, 54, 55, 56, 56, 56, 56, 56, + 56, 57, 57, 57, 57, 58, 58, 59, 60, 61, + 62, 62, 62, 62, 63, 64, 65, 66, 67, 68, + 68, 68, 68, 69, 70, 71, 72, 73, 74, 74, + 74, 74, 75, 76, 76, 76, 77, 78, 78, 79, + 79, 80, 80, 80, 81, 81, 82, 82, 83, 83, + 83, 83, 83, 83, 83, 84, 84, 85, 85 }; /* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ @@ -606,16 +609,16 @@ static const yytype_uint8 yyr2[] = { 0, 2, 2, 1, 2, 1, 0, 2, 2, 2, 2, 4, 4, 3, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 3, 2, 3, - 2, 3, 2, 0, 2, 2, 2, 2, 2, 2, - 3, 4, 4, 4, 5, 3, 0, 3, 0, 2, - 3, 2, 1, 3, 0, 2, 2, 2, 2, 2, - 4, 3, 2, 4, 0, 2, 3, 1, 3, 0, - 2, 2, 2, 3, 3, 2, 1, 3, 0, 2, - 2, 2, 3, 3, 2, 2, 2, 0, 2, 2, - 2, 4, 0, 2, 1, 1, 2, 2, 2, 1, - 2, 0, 2, 1, 3, 3, 3, 2, 3, 3, - 1, 1, 0, 1 + 1, 1, 1, 1, 1, 1, 1, 1, 3, 2, + 3, 2, 3, 2, 0, 2, 2, 2, 2, 2, + 2, 3, 4, 4, 4, 5, 3, 0, 3, 0, + 2, 3, 2, 1, 3, 0, 2, 2, 2, 2, + 2, 4, 3, 2, 4, 0, 2, 3, 1, 3, + 0, 2, 2, 2, 3, 3, 3, 1, 3, 0, + 2, 2, 2, 3, 3, 2, 2, 2, 0, 2, + 2, 2, 4, 0, 2, 2, 2, 0, 2, 1, + 1, 2, 2, 2, 1, 2, 0, 2, 1, 3, + 3, 3, 2, 3, 3, 1, 1, 0, 1 }; /* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state @@ -623,165 +626,172 @@ static const yytype_uint8 yyr2[] = means the default is an error. */ static const yytype_uint8 yydefact[] = { - 6, 0, 99, 0, 3, 0, 6, 6, 94, 95, - 0, 1, 0, 0, 0, 0, 112, 0, 0, 0, + 6, 0, 104, 0, 3, 0, 6, 6, 99, 100, + 0, 1, 0, 0, 0, 0, 117, 0, 0, 0, 0, 0, 0, 14, 18, 15, 16, 20, 17, 19, - 0, 21, 0, 7, 33, 24, 33, 25, 54, 64, - 8, 69, 22, 87, 78, 9, 26, 87, 23, 10, - 0, 100, 2, 73, 13, 0, 96, 0, 113, 0, - 97, 0, 0, 0, 110, 111, 0, 0, 0, 103, - 98, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 74, 82, 50, 83, 29, 31, 0, 107, 0, - 0, 66, 0, 0, 11, 12, 0, 0, 0, 0, - 92, 0, 0, 0, 46, 0, 39, 38, 34, 35, - 0, 37, 36, 0, 0, 92, 0, 58, 59, 55, - 57, 56, 65, 53, 52, 70, 72, 68, 71, 67, - 89, 90, 88, 79, 81, 77, 80, 76, 106, 108, - 109, 105, 104, 28, 85, 0, 101, 0, 101, 101, - 101, 0, 0, 0, 86, 62, 101, 0, 101, 0, - 0, 0, 40, 93, 0, 0, 101, 48, 45, 27, - 0, 61, 0, 91, 102, 41, 42, 43, 0, 0, - 47, 60, 63, 44, 49 + 21, 0, 22, 0, 7, 34, 25, 34, 26, 55, + 65, 8, 70, 23, 93, 79, 9, 27, 88, 24, + 10, 0, 105, 2, 74, 13, 0, 101, 0, 118, + 0, 102, 0, 0, 0, 115, 116, 0, 0, 0, + 108, 103, 0, 0, 0, 0, 0, 0, 0, 88, + 0, 0, 75, 83, 51, 84, 30, 32, 0, 112, + 0, 0, 67, 0, 0, 11, 12, 0, 0, 0, + 0, 97, 0, 0, 0, 47, 0, 40, 39, 35, + 36, 0, 38, 37, 0, 0, 97, 0, 59, 60, + 56, 58, 57, 66, 54, 53, 71, 73, 69, 72, + 68, 106, 95, 0, 94, 80, 82, 78, 81, 77, + 90, 91, 89, 111, 113, 114, 110, 109, 29, 86, + 0, 106, 0, 106, 106, 106, 0, 0, 0, 87, + 63, 106, 0, 106, 0, 96, 0, 0, 41, 98, + 0, 0, 106, 49, 46, 28, 0, 62, 0, 107, + 92, 42, 43, 44, 0, 0, 48, 61, 64, 45, + 50 }; /* YYDEFGOTO[NTERM-NUM]. */ static const yytype_int16 yydefgoto[] = { - -1, 3, 4, 5, 32, 33, 107, 34, 35, 36, - 37, 73, 108, 109, 152, 180, 38, 39, 123, 40, - 75, 119, 76, 41, 127, 42, 77, 6, 43, 44, - 135, 45, 79, 46, 47, 48, 110, 111, 78, 112, - 147, 148, 49, 7, 161, 68, 69, 59 + -1, 3, 4, 5, 33, 34, 108, 35, 36, 37, + 38, 74, 109, 110, 157, 186, 39, 40, 124, 41, + 76, 120, 77, 42, 128, 43, 78, 6, 44, 45, + 137, 46, 80, 47, 48, 49, 111, 112, 81, 113, + 79, 134, 152, 153, 50, 7, 165, 69, 70, 60 }; /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing STATE-NUM. */ -#define YYPACT_NINF -89 +#define YYPACT_NINF -90 static const yytype_int16 yypact[] = { - 3, 4, -89, 20, -89, 100, -89, 7, -89, -89, - -8, -89, 17, 4, 28, 4, 37, 36, 4, 68, - 87, -18, 69, -89, -89, -89, -89, -89, -89, -89, - 128, -89, 138, -89, -89, -89, -89, -89, -89, -89, - -89, -89, -89, -89, -89, -89, -89, -89, -89, -89, - 127, -89, -89, 110, -89, 126, -89, 136, -89, 137, - -89, 147, 150, 152, -89, -89, -18, -18, 171, -14, - -89, 153, 157, 34, 67, 180, 233, 220, 207, 220, - 154, -89, -89, -89, -89, -89, -89, 0, -89, -18, - -18, 110, 44, 44, -89, -89, 163, 174, 182, 4, - 4, -18, 194, 44, -89, 219, -89, -89, -89, -89, - 223, -89, -89, 203, 4, 4, 215, -89, -89, -89, - -89, -89, -89, -89, -89, -89, -89, -89, -89, -89, - -89, -89, -89, -89, -89, -89, -89, -89, -89, 213, - -89, -89, -89, -89, -89, -18, 232, 227, 232, -5, - 232, 44, 35, 234, -89, -89, 232, 235, 232, 224, - -18, 236, -89, -89, 237, 238, 232, 216, -89, -89, - 240, -89, 241, -89, 71, -89, -89, -89, 242, 4, - -89, -89, -89, -89, -89 + 4, 42, -90, 96, -90, 111, -90, 15, -90, -90, + 75, -90, 82, 42, 104, 42, 110, 107, 42, 115, + 125, -4, 121, -90, -90, -90, -90, -90, -90, -90, + -90, 162, -90, 163, -90, -90, -90, -90, -90, -90, + -90, -90, -90, -90, -90, -90, -90, -90, -90, -90, + -90, 139, -90, -90, 138, -90, 142, -90, 143, -90, + 152, -90, 164, 167, 168, -90, -90, -4, -4, 77, + -18, -90, 177, 185, 33, 71, 195, 247, 236, -2, + 236, 171, -90, -90, -90, -90, -90, -90, 41, -90, + -4, -4, 138, 97, 97, -90, -90, 186, 187, 194, + 42, 42, -4, 196, 97, -90, 219, -90, -90, -90, + -90, 210, -90, -90, 204, 42, 42, 199, -90, -90, + -90, -90, -90, -90, -90, -90, -90, -90, -90, -90, + -90, 222, -90, 223, -90, -90, -90, -90, -90, -90, + -90, -90, -90, -90, 215, -90, -90, -90, -90, -90, + -4, 222, 228, 222, -5, 222, 97, 35, 229, -90, + -90, 222, 232, 222, -4, -90, 135, 233, -90, -90, + 234, 235, 222, 240, -90, -90, 237, -90, 239, -13, + -90, -90, -90, -90, 244, 42, -90, -90, -90, -90, + -90 }; /* YYPGOTO[NTERM-NUM]. */ static const yytype_int16 yypgoto[] = { - -89, -89, 255, 267, -89, 47, -57, -89, -89, -89, - -89, 239, -89, -89, -89, -89, -89, -89, -89, 130, - -89, -89, -89, -89, -89, -89, -89, -89, -89, -89, - -89, 181, -89, -89, -89, -89, -89, 199, 229, 16, - 162, -1, 74, -7, 103, -65, -88, -89 + -90, -90, 269, 271, -90, 23, -70, -90, -90, -90, + -90, 243, -90, -90, -90, -90, -90, -90, -90, -48, + -90, -90, -90, -90, -90, -90, -90, -90, -90, -90, + -90, -20, -90, -90, -90, -90, -90, 206, 205, -68, + -90, -90, 169, -1, 27, -7, 118, -66, -89, -90 }; /* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If positive, shift that token. If negative, reduce the rule which number is the opposite. If zero, do what YYDEFACT says. If YYTABLE_NINF, syntax error. */ -#define YYTABLE_NINF -85 +#define YYTABLE_NINF -86 static const yytype_int16 yytable[] = { - 10, 87, 88, 53, 141, 142, 1, 64, 65, 160, - 1, 66, 55, 92, 57, 151, 67, 61, 118, 93, - 11, 131, 2, 131, 139, 140, 89, 90, 138, 8, - 9, 89, 90, 2, -30, 96, 149, 51, -30, -30, - -30, -30, -30, -30, -30, -30, 97, 54, -30, -30, - 98, -30, 99, 100, 101, 102, 103, 104, 56, 105, - 167, 91, 58, 166, 106, 168, 60, -32, 96, 64, - 65, -32, -32, -32, -32, -32, -32, -32, -32, 97, - 159, -32, -32, 98, -32, 99, 100, 101, 102, 103, - 104, 121, 105, 62, 132, 174, 132, 106, 146, 70, - -5, 12, 89, 90, 13, 14, 15, 16, 17, 18, - 19, 20, 63, 156, 21, 22, 23, 24, 25, 26, - 27, 28, 29, 122, 125, 30, 133, -4, 12, 71, - 31, 13, 14, 15, 16, 17, 18, 19, 20, 72, - 51, 21, 22, 23, 24, 25, 26, 27, 28, 29, - 124, 129, 30, 137, -84, 96, 81, 31, -84, -84, - -84, -84, -84, -84, -84, -84, 82, 83, -84, -84, - 98, -84, -84, -84, -84, -84, -84, 84, 184, 105, - 85, 96, 86, 94, 130, -51, -51, 95, -51, -51, - -51, -51, 97, 143, -51, -51, 98, 113, 114, 115, - 116, 2, 89, 90, 144, 105, 145, 126, 96, 134, - 117, -75, -75, -75, -75, -75, -75, -75, -75, 150, - 153, -75, -75, 98, 13, 14, 15, 16, 17, 18, - 19, 20, 105, 155, 21, 22, 154, 130, 14, 15, - 158, 17, 18, 19, 20, 90, 160, 21, 22, 179, - 31, 163, 164, 165, 173, 89, 90, 162, 128, 170, - 136, 172, 52, 31, 169, 171, 175, 176, 177, 178, - 181, 182, 183, 50, 120, 74, 80, 157 + 10, 88, 89, 54, 146, 147, 119, 1, 122, 164, + 93, 141, 56, 142, 58, 156, 94, 62, 1, 90, + 91, 131, 65, 66, 144, 145, 67, 90, 91, 132, + 127, 68, 136, -31, 97, 2, 154, -31, -31, -31, + -31, -31, -31, -31, -31, 98, 52, -31, -31, 99, + -31, 100, 101, 102, 103, 104, -31, 105, 129, 106, + 138, 173, 92, 141, 107, 142, 174, 172, 8, 9, + 143, -33, 97, 90, 91, -33, -33, -33, -33, -33, + -33, -33, -33, 98, 166, -33, -33, 99, -33, 100, + 101, 102, 103, 104, -33, 105, 11, 106, 179, 151, + 123, 126, 107, 135, 125, 130, 2, 139, 2, 90, + 91, -5, 12, 55, 161, 13, 14, 15, 16, 17, + 18, 19, 20, 65, 66, 21, 22, 23, 24, 25, + 26, 27, 28, 29, 30, 57, 59, 31, 61, -4, + 12, 63, 32, 13, 14, 15, 16, 17, 18, 19, + 20, 64, 71, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 30, 72, 73, 31, 180, 90, 91, 52, + 32, -85, 97, 82, 83, -85, -85, -85, -85, -85, + -85, -85, -85, 84, 190, -85, -85, 99, -85, -85, + -85, -85, -85, -85, -85, 85, 97, 106, 86, 87, + -52, -52, 140, -52, -52, -52, -52, 98, 95, -52, + -52, 99, 114, 115, 116, 117, 96, 148, 149, 150, + 158, 106, 155, 159, 97, 163, 118, -76, -76, -76, + -76, -76, -76, -76, -76, 160, 164, -76, -76, 99, + 13, 14, 15, 16, 17, 18, 19, 20, 91, 106, + 21, 22, 14, 15, 140, 17, 18, 19, 20, 168, + 175, 21, 22, 177, 181, 182, 183, 32, 187, 167, + 188, 169, 170, 171, 185, 189, 53, 51, 32, 176, + 75, 178, 121, 0, 133, 162, 0, 0, 0, 0, + 184 }; -static const yytype_uint8 yycheck[] = +static const yytype_int16 yycheck[] = { - 1, 66, 67, 10, 92, 93, 3, 25, 26, 14, - 3, 29, 13, 27, 15, 103, 34, 18, 75, 33, - 0, 78, 30, 80, 89, 90, 31, 32, 28, 25, - 26, 31, 32, 30, 0, 1, 101, 30, 4, 5, - 6, 7, 8, 9, 10, 11, 12, 30, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, 30, 25, - 25, 68, 25, 151, 30, 30, 30, 0, 1, 25, - 26, 4, 5, 6, 7, 8, 9, 10, 11, 12, - 145, 14, 15, 16, 17, 18, 19, 20, 21, 22, - 23, 75, 25, 25, 78, 160, 80, 30, 99, 30, - 0, 1, 31, 32, 4, 5, 6, 7, 8, 9, - 10, 11, 25, 114, 14, 15, 16, 17, 18, 19, - 20, 21, 22, 76, 77, 25, 79, 0, 1, 1, - 30, 4, 5, 6, 7, 8, 9, 10, 11, 1, - 30, 14, 15, 16, 17, 18, 19, 20, 21, 22, - 76, 77, 25, 79, 0, 1, 30, 30, 4, 5, - 6, 7, 8, 9, 10, 11, 30, 30, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 30, 179, 25, - 30, 1, 30, 30, 30, 5, 6, 30, 8, 9, - 10, 11, 12, 30, 14, 15, 16, 17, 18, 19, - 20, 30, 31, 32, 30, 25, 24, 77, 1, 79, - 30, 4, 5, 6, 7, 8, 9, 10, 11, 25, - 1, 14, 15, 16, 4, 5, 6, 7, 8, 9, - 10, 11, 25, 30, 14, 15, 13, 30, 5, 6, - 25, 8, 9, 10, 11, 32, 14, 14, 15, 33, - 30, 148, 149, 150, 30, 31, 32, 30, 77, 156, - 79, 158, 7, 30, 30, 30, 30, 30, 30, 166, - 30, 30, 30, 6, 75, 36, 47, 115 + 1, 67, 68, 10, 93, 94, 76, 3, 76, 14, + 28, 81, 13, 81, 15, 104, 34, 18, 3, 32, + 33, 23, 26, 27, 90, 91, 30, 32, 33, 31, + 78, 35, 80, 0, 1, 31, 102, 4, 5, 6, + 7, 8, 9, 10, 11, 12, 31, 14, 15, 16, + 17, 18, 19, 20, 21, 22, 23, 24, 78, 26, + 80, 26, 69, 133, 31, 133, 31, 156, 26, 27, + 29, 0, 1, 32, 33, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 150, 14, 15, 16, 17, 18, + 19, 20, 21, 22, 23, 24, 0, 26, 164, 100, + 77, 78, 31, 80, 77, 78, 31, 80, 31, 32, + 33, 0, 1, 31, 115, 4, 5, 6, 7, 8, + 9, 10, 11, 26, 27, 14, 15, 16, 17, 18, + 19, 20, 21, 22, 23, 31, 26, 26, 31, 0, + 1, 26, 31, 4, 5, 6, 7, 8, 9, 10, + 11, 26, 31, 14, 15, 16, 17, 18, 19, 20, + 21, 22, 23, 1, 1, 26, 31, 32, 33, 31, + 31, 0, 1, 31, 31, 4, 5, 6, 7, 8, + 9, 10, 11, 31, 185, 14, 15, 16, 17, 18, + 19, 20, 21, 22, 23, 31, 1, 26, 31, 31, + 5, 6, 31, 8, 9, 10, 11, 12, 31, 14, + 15, 16, 17, 18, 19, 20, 31, 31, 31, 25, + 1, 26, 26, 13, 1, 26, 31, 4, 5, 6, + 7, 8, 9, 10, 11, 31, 14, 14, 15, 16, + 4, 5, 6, 7, 8, 9, 10, 11, 33, 26, + 14, 15, 5, 6, 31, 8, 9, 10, 11, 31, + 31, 14, 15, 31, 31, 31, 31, 31, 31, 151, + 31, 153, 154, 155, 34, 31, 7, 6, 31, 161, + 37, 163, 76, -1, 79, 116, -1, -1, -1, -1, + 172 }; /* YYSTOS[STATE-NUM] -- The (internal number of the) accessing symbol of state STATE-NUM. */ static const yytype_uint8 yystos[] = { - 0, 3, 30, 36, 37, 38, 62, 78, 25, 26, - 76, 0, 1, 4, 5, 6, 7, 8, 9, 10, + 0, 3, 31, 37, 38, 39, 63, 81, 26, 27, + 79, 0, 1, 4, 5, 6, 7, 8, 9, 10, 11, 14, 15, 16, 17, 18, 19, 20, 21, 22, - 25, 30, 39, 40, 42, 43, 44, 45, 51, 52, - 54, 58, 60, 63, 64, 66, 68, 69, 70, 77, - 38, 30, 37, 78, 30, 76, 30, 76, 25, 82, - 30, 76, 25, 25, 25, 26, 29, 34, 80, 81, - 30, 1, 1, 46, 46, 55, 57, 61, 73, 67, - 73, 30, 30, 30, 30, 30, 30, 80, 80, 31, - 32, 78, 27, 33, 30, 30, 1, 12, 16, 18, - 19, 20, 21, 22, 23, 25, 30, 41, 47, 48, - 71, 72, 74, 17, 18, 19, 20, 30, 41, 56, - 72, 74, 40, 53, 77, 40, 54, 59, 66, 77, - 30, 41, 74, 40, 54, 65, 66, 77, 28, 80, - 80, 81, 81, 30, 30, 24, 76, 75, 76, 80, - 25, 81, 49, 1, 13, 30, 76, 75, 25, 80, - 14, 79, 30, 79, 79, 79, 81, 25, 30, 30, - 79, 30, 79, 30, 80, 30, 30, 30, 79, 33, - 50, 30, 30, 30, 76 + 23, 26, 31, 40, 41, 43, 44, 45, 46, 52, + 53, 55, 59, 61, 64, 65, 67, 69, 70, 71, + 80, 39, 31, 38, 81, 31, 79, 31, 79, 26, + 85, 31, 79, 26, 26, 26, 27, 30, 35, 83, + 84, 31, 1, 1, 47, 47, 56, 58, 62, 76, + 68, 74, 31, 31, 31, 31, 31, 31, 83, 83, + 32, 33, 81, 28, 34, 31, 31, 1, 12, 16, + 18, 19, 20, 21, 22, 24, 26, 31, 42, 48, + 49, 72, 73, 75, 17, 18, 19, 20, 31, 42, + 57, 73, 75, 41, 54, 80, 41, 55, 60, 67, + 80, 23, 31, 74, 77, 41, 55, 66, 67, 80, + 31, 42, 75, 29, 83, 83, 84, 84, 31, 31, + 25, 79, 78, 79, 83, 26, 84, 50, 1, 13, + 31, 79, 78, 26, 14, 82, 83, 82, 31, 82, + 82, 82, 84, 26, 31, 31, 82, 31, 82, 83, + 31, 31, 31, 31, 82, 34, 51, 31, 31, 31, + 79 }; #define yyerrok (yyerrstatus = 0) @@ -1292,7 +1302,7 @@ yydestruct (yymsg, yytype, yyvaluep) switch (yytype) { - case 52: /* "choice_entry" */ + case 53: /* "choice_entry" */ { fprintf(stderr, "%s:%d: missing end statement for this entry\n", @@ -1302,7 +1312,7 @@ yydestruct (yymsg, yytype, yyvaluep) }; break; - case 58: /* "if_entry" */ + case 59: /* "if_entry" */ { fprintf(stderr, "%s:%d: missing end statement for this entry\n", @@ -1312,7 +1322,7 @@ yydestruct (yymsg, yytype, yyvaluep) }; break; - case 64: /* "menu_entry" */ + case 65: /* "menu_entry" */ { fprintf(stderr, "%s:%d: missing end statement for this entry\n", @@ -1644,17 +1654,17 @@ yyreduce: { zconf_error("invalid statement"); ;} break; - case 27: + case 28: { zconf_error("unknown option \"%s\"", (yyvsp[(1) - (3)].string)); ;} break; - case 28: + case 29: { zconf_error("invalid option"); ;} break; - case 29: + case 30: { struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0); @@ -1664,7 +1674,7 @@ yyreduce: ;} break; - case 30: + case 31: { menu_end_entry(); @@ -1672,7 +1682,7 @@ yyreduce: ;} break; - case 31: + case 32: { struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0); @@ -1682,7 +1692,7 @@ yyreduce: ;} break; - case 32: + case 33: { if (current_entry->prompt) @@ -1694,7 +1704,7 @@ yyreduce: ;} break; - case 40: + case 41: { menu_set_type((yyvsp[(1) - (3)].id)->stype); @@ -1704,7 +1714,7 @@ yyreduce: ;} break; - case 41: + case 42: { menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr)); @@ -1712,7 +1722,7 @@ yyreduce: ;} break; - case 42: + case 43: { menu_add_expr(P_DEFAULT, (yyvsp[(2) - (4)].expr), (yyvsp[(3) - (4)].expr)); @@ -1724,7 +1734,7 @@ yyreduce: ;} break; - case 43: + case 44: { menu_add_symbol(P_SELECT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr)); @@ -1732,7 +1742,7 @@ yyreduce: ;} break; - case 44: + case 45: { menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,(yyvsp[(2) - (5)].symbol), (yyvsp[(3) - (5)].symbol)), (yyvsp[(4) - (5)].expr)); @@ -1740,7 +1750,7 @@ yyreduce: ;} break; - case 47: + case 48: { struct kconf_id *id = kconf_id_lookup((yyvsp[(2) - (3)].string), strlen((yyvsp[(2) - (3)].string))); @@ -1752,17 +1762,17 @@ yyreduce: ;} break; - case 48: + case 49: { (yyval.string) = NULL; ;} break; - case 49: + case 50: { (yyval.string) = (yyvsp[(2) - (2)].string); ;} break; - case 50: + case 51: { struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), SYMBOL_CHOICE); @@ -1773,14 +1783,14 @@ yyreduce: ;} break; - case 51: + case 52: { (yyval.menu) = menu_add_menu(); ;} break; - case 52: + case 53: { if (zconf_endtoken((yyvsp[(1) - (1)].id), T_CHOICE, T_ENDCHOICE)) { @@ -1790,7 +1800,7 @@ yyreduce: ;} break; - case 60: + case 61: { menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr)); @@ -1798,7 +1808,7 @@ yyreduce: ;} break; - case 61: + case 62: { if ((yyvsp[(1) - (3)].id)->stype == S_BOOLEAN || (yyvsp[(1) - (3)].id)->stype == S_TRISTATE) { @@ -1811,7 +1821,7 @@ yyreduce: ;} break; - case 62: + case 63: { current_entry->sym->flags |= SYMBOL_OPTIONAL; @@ -1819,7 +1829,7 @@ yyreduce: ;} break; - case 63: + case 64: { if ((yyvsp[(1) - (4)].id)->stype == S_UNKNOWN) { @@ -1831,7 +1841,7 @@ yyreduce: ;} break; - case 66: + case 67: { printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno()); @@ -1841,7 +1851,7 @@ yyreduce: ;} break; - case 67: + case 68: { if (zconf_endtoken((yyvsp[(1) - (1)].id), T_IF, T_ENDIF)) { @@ -1851,14 +1861,14 @@ yyreduce: ;} break; - case 73: + case 74: { menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL); ;} break; - case 74: + case 75: { menu_add_entry(NULL); @@ -1867,14 +1877,14 @@ yyreduce: ;} break; - case 75: + case 76: { (yyval.menu) = menu_add_menu(); ;} break; - case 76: + case 77: { if (zconf_endtoken((yyvsp[(1) - (1)].id), T_MENU, T_ENDMENU)) { @@ -1884,7 +1894,7 @@ yyreduce: ;} break; - case 82: + case 83: { printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string)); @@ -1892,7 +1902,7 @@ yyreduce: ;} break; - case 83: + case 84: { menu_add_entry(NULL); @@ -1901,14 +1911,14 @@ yyreduce: ;} break; - case 84: + case 85: { menu_end_entry(); ;} break; - case 85: + case 86: { printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno()); @@ -1916,14 +1926,14 @@ yyreduce: ;} break; - case 86: + case 87: { current_entry->help = (yyvsp[(2) - (2)].string); ;} break; - case 91: + case 92: { menu_add_dep((yyvsp[(3) - (4)].expr)); @@ -1931,84 +1941,91 @@ yyreduce: ;} break; - case 93: + case 96: + + { + menu_add_visibility((yyvsp[(2) - (2)].expr)); +;} + break; + + case 98: { menu_add_prompt(P_PROMPT, (yyvsp[(1) - (2)].string), (yyvsp[(2) - (2)].expr)); ;} break; - case 96: + case 101: { (yyval.id) = (yyvsp[(1) - (2)].id); ;} break; - case 97: + case 102: { (yyval.id) = (yyvsp[(1) - (2)].id); ;} break; - case 98: + case 103: { (yyval.id) = (yyvsp[(1) - (2)].id); ;} break; - case 101: + case 106: { (yyval.expr) = NULL; ;} break; - case 102: + case 107: { (yyval.expr) = (yyvsp[(2) - (2)].expr); ;} break; - case 103: + case 108: { (yyval.expr) = expr_alloc_symbol((yyvsp[(1) - (1)].symbol)); ;} break; - case 104: + case 109: { (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;} break; - case 105: + case 110: { (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;} break; - case 106: + case 111: { (yyval.expr) = (yyvsp[(2) - (3)].expr); ;} break; - case 107: + case 112: { (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[(2) - (2)].expr)); ;} break; - case 108: + case 113: { (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;} break; - case 109: + case 114: { (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;} break; - case 110: + case 115: { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 0); free((yyvsp[(1) - (1)].string)); ;} break; - case 111: + case 116: { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), SYMBOL_CONST); free((yyvsp[(1) - (1)].string)); ;} break; - case 112: + case 117: { (yyval.string) = NULL; ;} break; @@ -2278,6 +2295,7 @@ static const char *zconf_tokenname(int token) case T_IF: return "if"; case T_ENDIF: return "endif"; case T_DEPENDS: return "depends"; + case T_VISIBLE: return "visible"; } return ""; } -- cgit v1.2.3-70-g09d2 From dfc518dd6b5c5e00f98906eaa5c7d716d856c098 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 6 Nov 2010 18:30:25 -0300 Subject: Revert "i2c: Fix Kconfig dependencies" This reverts commit 0a57274ea026c2b7670683947b6cc08b195148cf. Signed-off-by: Arnaud Lacombe Signed-off-by: Mauro Carvalho Chehab --- drivers/i2c/Kconfig | 3 +-- drivers/i2c/algos/Kconfig | 12 ------------ 2 files changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index b923074b2cb..30f06e956bf 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -75,8 +75,7 @@ config I2C_HELPER_AUTO In doubt, say Y. config I2C_SMBUS - tristate - prompt "SMBus-specific protocols" if !I2C_HELPER_AUTO + tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO help Say Y here if you want support for SMBus extensions to the I2C specification. At the moment, the only supported extension is diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig index 3998dd620a0..7b2ce4a0852 100644 --- a/drivers/i2c/algos/Kconfig +++ b/drivers/i2c/algos/Kconfig @@ -15,15 +15,3 @@ config I2C_ALGOPCA tristate "I2C PCA 9564 interfaces" endmenu - -# In automatic configuration mode, we still have to define the -# symbols to avoid unmet dependencies. - -if I2C_HELPER_AUTO -config I2C_ALGOBIT - tristate -config I2C_ALGOPCF - tristate -config I2C_ALGOPCA - tristate -endif -- cgit v1.2.3-70-g09d2 From 37e3273ee52fb995c1f531fa1d98d190cc35e1bc Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 6 Nov 2010 18:30:26 -0300 Subject: media/video: convert Kconfig to use the menu's `visible' keyword Signed-off-by: Arnaud Lacombe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index ac16e815e27..6830d2848bd 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -112,7 +112,7 @@ config VIDEO_IR_I2C # menu "Encoders/decoders and other helper chips" - depends on !VIDEO_HELPER_CHIPS_AUTO + visible if !VIDEO_HELPER_CHIPS_AUTO comment "Audio decoders" -- cgit v1.2.3-70-g09d2 From c38bd4ffc7f24a99a14f9c776276e816f5de2509 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 6 Nov 2010 18:30:27 -0300 Subject: i2c/algos: convert Kconfig to use the menu's `visible' keyword Signed-off-by: Arnaud Lacombe Signed-off-by: Mauro Carvalho Chehab --- drivers/i2c/algos/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig index 7b2ce4a0852..f1cfe7e5508 100644 --- a/drivers/i2c/algos/Kconfig +++ b/drivers/i2c/algos/Kconfig @@ -3,7 +3,7 @@ # menu "I2C Algorithms" - depends on !I2C_HELPER_AUTO + visible if !I2C_HELPER_AUTO config I2C_ALGOBIT tristate "I2C bit-banging interfaces" -- cgit v1.2.3-70-g09d2 From 9b4320b77bab4031649c484da1c595f39c2e43cd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 9 Nov 2010 14:29:05 -0300 Subject: [media] Fix Kconfig errors due to two visible menus Use the new visible Kconfig keyword to avoid producing error for two menus that are visible only if Tuner/frontend customise options are enabled. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/Kconfig | 8 ++++---- drivers/media/dvb/frontends/Kconfig | 5 +---- 2 files changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig index 2385e6cca63..78b089526e0 100644 --- a/drivers/media/common/tuners/Kconfig +++ b/drivers/media/common/tuners/Kconfig @@ -31,7 +31,7 @@ config MEDIA_TUNER select MEDIA_TUNER_TDA9887 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE -menuconfig MEDIA_TUNER_CUSTOMISE +config MEDIA_TUNER_CUSTOMISE bool "Customize analog and hybrid tuner modules to build" depends on MEDIA_TUNER default y if EMBEDDED @@ -44,7 +44,8 @@ menuconfig MEDIA_TUNER_CUSTOMISE If unsure say N. -if MEDIA_TUNER_CUSTOMISE +menu "Customize TV tuners" + visible if MEDIA_TUNER_CUSTOMISE config MEDIA_TUNER_SIMPLE tristate "Simple tuner support" @@ -185,5 +186,4 @@ config MEDIA_TUNER_TDA18218 default m if MEDIA_TUNER_CUSTOMISE help NXP TDA18218 silicon tuner driver. - -endif # MEDIA_TUNER_CUSTOMISE +endmenu diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index e9062b08a48..96b27016670 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -12,9 +12,8 @@ config DVB_FE_CUSTOMISE If unsure say N. -if DVB_FE_CUSTOMISE - menu "Customise DVB Frontends" + visible if DVB_FE_CUSTOMISE comment "Multistandard (satellite) frontends" depends on DVB_CORE @@ -619,5 +618,3 @@ config DVB_DUMMY_FE tristate "Dummy frontend driver" default n endmenu - -endif -- cgit v1.2.3-70-g09d2 From aa2d8cbe169b7328eeabc9e2debccf5aee6f9199 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 23 Oct 2010 09:13:37 -0300 Subject: [media] v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev* (2) With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, replace the hardcoded module name passed to those functions by NULL in the cafe-ccic, via-camera and s5p-fimc drivers. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the drivers modified here use. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cafe_ccic.c | 3 +-- drivers/media/video/s5p-fimc/fimc-capture.c | 2 +- drivers/media/video/via-camera.c | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 7bc36670071..61a58d475b7 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -2066,8 +2066,7 @@ static int cafe_pci_probe(struct pci_dev *pdev, cam->sensor_addr = 0x42; cam->sensor = v4l2_i2c_new_subdev_cfg(&cam->v4l2_dev, &cam->i2c_adapter, - "ov7670", "ov7670", 0, &sensor_cfg, cam->sensor_addr, - NULL); + NULL, "ov7670", 0, &sensor_cfg, cam->sensor_addr, NULL); if (cam->sensor == NULL) { ret = -ENODEV; goto out_smbus; diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index e8f13d3e2df..26f7ad292ae 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -44,7 +44,7 @@ static struct v4l2_subdev *fimc_subdev_register(struct fimc_dev *fimc, return ERR_PTR(-ENOMEM); sd = v4l2_i2c_new_subdev_board(&vid_cap->v4l2_dev, i2c_adap, - MODULE_NAME, isp_info->board_info, NULL); + NULL, isp_info->board_info, NULL); if (!sd) { v4l2_err(&vid_cap->v4l2_dev, "failed to acquire subdev\n"); return NULL; diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c index 02a21bccae1..01bcdb44b5c 100644 --- a/drivers/media/video/via-camera.c +++ b/drivers/media/video/via-camera.c @@ -1360,7 +1360,7 @@ static __devinit int viacam_probe(struct platform_device *pdev) */ sensor_adapter = viafb_find_i2c_adapter(VIA_PORT_31); cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, sensor_adapter, - "ov7670", "ov7670", 0x42 >> 1, NULL); + NULL, "ov7670", 0x42 >> 1, NULL); if (cam->sensor == NULL) { dev_err(&pdev->dev, "Unable to find the sensor!\n"); ret = -ENODEV; -- cgit v1.2.3-70-g09d2 From 9a1f8b34aa539000da17a06235e4bec254d0bfb5 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 24 Sep 2010 10:16:44 -0300 Subject: [media] v4l: Remove module_name argument to the v4l2_i2c_new_subdev* functions The argument isn't used anymore by the functions, remove it. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-si4713.c | 2 +- drivers/media/video/au0828/au0828-cards.c | 4 ++-- drivers/media/video/bt8xx/bttv-cards.c | 22 +++++++++++----------- drivers/media/video/cafe_ccic.c | 2 +- drivers/media/video/cx18/cx18-i2c.c | 8 ++++---- drivers/media/video/cx231xx/cx231xx-cards.c | 4 ++-- drivers/media/video/cx23885/cx23885-cards.c | 2 +- drivers/media/video/cx23885/cx23885-video.c | 4 ++-- drivers/media/video/cx88/cx88-cards.c | 9 ++++----- drivers/media/video/cx88/cx88-video.c | 7 +++---- drivers/media/video/davinci/vpfe_capture.c | 1 - drivers/media/video/davinci/vpif_capture.c | 1 - drivers/media/video/davinci/vpif_display.c | 2 +- drivers/media/video/em28xx/em28xx-cards.c | 18 +++++++++--------- drivers/media/video/fsl-viu.c | 2 +- drivers/media/video/ivtv/ivtv-i2c.c | 22 +++++++++------------- drivers/media/video/mxb.c | 12 ++++++------ drivers/media/video/pvrusb2/pvrusb2-hdw.c | 6 ++---- drivers/media/video/s5p-fimc/fimc-capture.c | 2 +- drivers/media/video/saa7134/saa7134-cards.c | 8 ++++---- drivers/media/video/saa7134/saa7134-core.c | 4 ++-- drivers/media/video/sh_vou.c | 2 +- drivers/media/video/soc_camera.c | 2 +- drivers/media/video/usbvision/usbvision-i2c.c | 6 +++--- drivers/media/video/v4l2-common.c | 15 +++++---------- drivers/media/video/via-camera.c | 2 +- drivers/media/video/vino.c | 4 ++-- drivers/media/video/zoran/zoran_card.c | 5 ++--- drivers/staging/go7007/go7007-driver.c | 2 +- drivers/staging/tm6000/tm6000-cards.c | 4 ++-- include/media/v4l2-common.h | 16 ++++++---------- 31 files changed, 90 insertions(+), 110 deletions(-) diff --git a/drivers/media/radio/radio-si4713.c b/drivers/media/radio/radio-si4713.c index 6a435786b63..03829e6818b 100644 --- a/drivers/media/radio/radio-si4713.c +++ b/drivers/media/radio/radio-si4713.c @@ -291,7 +291,7 @@ static int radio_si4713_pdriver_probe(struct platform_device *pdev) goto unregister_v4l2_dev; } - sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter, NULL, + sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter, pdata->subdev_board_info, NULL); if (!sd) { dev_err(&pdev->dev, "Cannot get v4l2 subdevice\n"); diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 0453816d4ec..01be89fa5c7 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -212,7 +212,7 @@ void au0828_card_setup(struct au0828_dev *dev) be abstracted out if we ever need to support a different demod) */ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - NULL, "au8522", 0x8e >> 1, NULL); + "au8522", 0x8e >> 1, NULL); if (sd == NULL) printk(KERN_ERR "analog subdev registration failed\n"); } @@ -221,7 +221,7 @@ void au0828_card_setup(struct au0828_dev *dev) if (dev->board.tuner_type != TUNER_ABSENT) { /* Load the tuner module, which does the attach */ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - NULL, "tuner", dev->board.tuner_addr, NULL); + "tuner", dev->board.tuner_addr, NULL); if (sd == NULL) printk(KERN_ERR "tuner subdev registration fail\n"); diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 87d8b006ef7..49efcf660ba 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -3529,7 +3529,7 @@ void __devinit bttv_init_card2(struct bttv *btv) struct v4l2_subdev *sd; sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, NULL, "saa6588", 0, addrs); + &btv->c.i2c_adap, "saa6588", 0, addrs); btv->has_saa6588 = (sd != NULL); } @@ -3554,7 +3554,7 @@ void __devinit bttv_init_card2(struct bttv *btv) }; btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, NULL, "msp3400", 0, addrs); + &btv->c.i2c_adap, "msp3400", 0, addrs); if (btv->sd_msp34xx) return; goto no_audio; @@ -3568,7 +3568,7 @@ void __devinit bttv_init_card2(struct bttv *btv) }; if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, NULL, "tda7432", 0, addrs)) + &btv->c.i2c_adap, "tda7432", 0, addrs)) return; goto no_audio; } @@ -3576,7 +3576,7 @@ void __devinit bttv_init_card2(struct bttv *btv) case 3: { /* The user specified that we should probe for tvaudio */ btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, NULL, "tvaudio", 0, tvaudio_addrs()); + &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); if (btv->sd_tvaudio) return; goto no_audio; @@ -3596,11 +3596,11 @@ void __devinit bttv_init_card2(struct bttv *btv) found is really something else (e.g. a tea6300). */ if (!bttv_tvcards[btv->c.type].no_msp34xx) { btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, NULL, "msp3400", + &btv->c.i2c_adap, "msp3400", 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1)); } else if (bttv_tvcards[btv->c.type].msp34xx_alt) { btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, NULL, "msp3400", + &btv->c.i2c_adap, "msp3400", 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1)); } @@ -3616,13 +3616,13 @@ void __devinit bttv_init_card2(struct bttv *btv) }; if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, NULL, "tda7432", 0, addrs)) + &btv->c.i2c_adap, "tda7432", 0, addrs)) return; } /* Now see if we can find one of the tvaudio devices. */ btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, NULL, "tvaudio", 0, tvaudio_addrs()); + &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); if (btv->sd_tvaudio) return; @@ -3646,13 +3646,13 @@ void __devinit bttv_init_tuner(struct bttv *btv) /* Load tuner module before issuing tuner config call! */ if (bttv_tvcards[btv->c.type].has_radio) v4l2_i2c_new_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, NULL, "tuner", + &btv->c.i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); v4l2_i2c_new_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, NULL, "tuner", + &btv->c.i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); v4l2_i2c_new_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, NULL, "tuner", + &btv->c.i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 61a58d475b7..260c666ce93 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -2066,7 +2066,7 @@ static int cafe_pci_probe(struct pci_dev *pdev, cam->sensor_addr = 0x42; cam->sensor = v4l2_i2c_new_subdev_cfg(&cam->v4l2_dev, &cam->i2c_adapter, - NULL, "ov7670", 0, &sensor_cfg, cam->sensor_addr, NULL); + "ov7670", 0, &sensor_cfg, cam->sensor_addr, NULL); if (cam->sensor == NULL) { ret = -ENODEV; goto out_smbus; diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index a09caf88317..e71a026f341 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -122,15 +122,15 @@ int cx18_i2c_register(struct cx18 *cx, unsigned idx) if (hw == CX18_HW_TUNER) { /* special tuner group handling */ sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, - adap, NULL, type, 0, cx->card_i2c->radio); + adap, type, 0, cx->card_i2c->radio); if (sd != NULL) sd->grp_id = hw; sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, - adap, NULL, type, 0, cx->card_i2c->demod); + adap, type, 0, cx->card_i2c->demod); if (sd != NULL) sd->grp_id = hw; sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, - adap, NULL, type, 0, cx->card_i2c->tv); + adap, type, 0, cx->card_i2c->tv); if (sd != NULL) sd->grp_id = hw; return sd != NULL ? 0 : -1; @@ -144,7 +144,7 @@ int cx18_i2c_register(struct cx18 *cx, unsigned idx) return -1; /* It's an I2C device other than an analog tuner or IR chip */ - sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, NULL, type, hw_addrs[idx], + sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, type, hw_addrs[idx], NULL); if (sd != NULL) sd->grp_id = hw; diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c index 56c2d8195ac..2c78d188bb0 100644 --- a/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/drivers/media/video/cx231xx/cx231xx-cards.c @@ -560,7 +560,7 @@ void cx231xx_card_setup(struct cx231xx *dev) if (dev->board.decoder == CX231XX_AVDECODER) { dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[0].i2c_adap, - NULL, "cx25840", 0x88 >> 1, NULL); + "cx25840", 0x88 >> 1, NULL); if (dev->sd_cx25840 == NULL) cx231xx_info("cx25840 subdev registration failure\n"); cx25840_call(dev, core, load_fw); @@ -571,7 +571,7 @@ void cx231xx_card_setup(struct cx231xx *dev) if (dev->board.tuner_type != TUNER_ABSENT) { dev->sd_tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap, - NULL, "tuner", + "tuner", dev->tuner_addr, NULL); if (dev->sd_tuner == NULL) cx231xx_info("tuner subdev registration failure\n"); diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index db054004e46..8861309268b 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -1247,7 +1247,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[2].i2c_adap, - NULL, "cx25840", 0x88 >> 1, NULL); + "cx25840", 0x88 >> 1, NULL); if (dev->sd_cx25840) { dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE; v4l2_subdev_call(dev->sd_cx25840, core, load_fw); diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 3cc9f462d08..8b2fb8a4375 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -1507,10 +1507,10 @@ int cx23885_video_register(struct cx23885_dev *dev) if (dev->tuner_addr) sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[1].i2c_adap, - NULL, "tuner", dev->tuner_addr, NULL); + "tuner", dev->tuner_addr, NULL); else sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_bus[1].i2c_adap, NULL, + &dev->i2c_bus[1].i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV)); if (sd) { struct tuner_setup tun_setup; diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index b26fcba8600..9b9e169cce9 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -3515,19 +3515,18 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) later code configures a tea5767. */ v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, - NULL, "tuner", - 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); + "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); if (has_demod) v4l2_i2c_new_subdev(&core->v4l2_dev, - &core->i2c_adap, NULL, "tuner", + &core->i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); if (core->board.tuner_addr == ADDR_UNSET) { v4l2_i2c_new_subdev(&core->v4l2_dev, - &core->i2c_adap, NULL, "tuner", + &core->i2c_adap, "tuner", 0, has_demod ? tv_addrs + 4 : tv_addrs); } else { v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, - NULL, "tuner", core->board.tuner_addr, NULL); + "tuner", core->board.tuner_addr, NULL); } } diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index d2f159daa8b..ab98c0e07f9 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1896,14 +1896,13 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, if (core->board.audio_chip == V4L2_IDENT_WM8775) v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, - NULL, "wm8775", 0x36 >> 1, NULL); + "wm8775", 0x36 >> 1, NULL); if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) { /* This probes for a tda9874 as is used on some Pixelview Ultra boards. */ - v4l2_i2c_new_subdev(&core->v4l2_dev, - &core->i2c_adap, - NULL, "tvaudio", 0, I2C_ADDRS(0xb0 >> 1)); + v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, + "tvaudio", 0, I2C_ADDRS(0xb0 >> 1)); } switch (core->boardnr) { diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c index d8e38cc4ec4..7333a9bb254 100644 --- a/drivers/media/video/davinci/vpfe_capture.c +++ b/drivers/media/video/davinci/vpfe_capture.c @@ -1986,7 +1986,6 @@ static __init int vpfe_probe(struct platform_device *pdev) vpfe_dev->sd[i] = v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev, i2c_adap, - NULL, &sdinfo->board_info, NULL); if (vpfe_dev->sd[i]) { diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index 6ac6acd1635..193abab6b35 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -2013,7 +2013,6 @@ static __init int vpif_probe(struct platform_device *pdev) vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev, i2c_adap, - NULL, &subdevdata->board_info, NULL); diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 685f6a6ee60..412c65d54fe 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -1553,7 +1553,7 @@ static __init int vpif_probe(struct platform_device *pdev) for (i = 0; i < subdev_count; i++) { vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev, - i2c_adap, NULL, + i2c_adap, &subdevdata[i].board_info, NULL); if (!vpif_obj.sd[i]) { diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 54859233f31..f7e9168157a 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -2554,39 +2554,39 @@ void em28xx_card_setup(struct em28xx *dev) /* request some modules */ if (dev->board.has_msp34xx) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - NULL, "msp3400", 0, msp3400_addrs); + "msp3400", 0, msp3400_addrs); if (dev->board.decoder == EM28XX_SAA711X) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - NULL, "saa7115_auto", 0, saa711x_addrs); + "saa7115_auto", 0, saa711x_addrs); if (dev->board.decoder == EM28XX_TVP5150) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - NULL, "tvp5150", 0, tvp5150_addrs); + "tvp5150", 0, tvp5150_addrs); if (dev->em28xx_sensor == EM28XX_MT9V011) { struct v4l2_subdev *sd; sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap, NULL, "mt9v011", 0, mt9v011_addrs); + &dev->i2c_adap, "mt9v011", 0, mt9v011_addrs); v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal); } if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - NULL, "tvaudio", dev->board.tvaudio_addr, NULL); + "tvaudio", dev->board.tvaudio_addr, NULL); if (dev->board.tuner_type != TUNER_ABSENT) { int has_demod = (dev->tda9887_conf & TDA9887_PRESENT); if (dev->board.radio.type) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - NULL, "tuner", dev->board.radio_addr, NULL); + "tuner", dev->board.radio_addr, NULL); if (has_demod) v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap, NULL, "tuner", + &dev->i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); if (dev->tuner_addr == 0) { enum v4l2_i2c_tuner_type type = @@ -2594,14 +2594,14 @@ void em28xx_card_setup(struct em28xx *dev) struct v4l2_subdev *sd; sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap, NULL, "tuner", + &dev->i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(type)); if (sd) dev->tuner_addr = v4l2_i2c_subdev_addr(sd); } else { v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - NULL, "tuner", dev->tuner_addr, NULL); + "tuner", dev->tuner_addr, NULL); } } diff --git a/drivers/media/video/fsl-viu.c b/drivers/media/video/fsl-viu.c index 9a075d83dd1..b8faff2dd71 100644 --- a/drivers/media/video/fsl-viu.c +++ b/drivers/media/video/fsl-viu.c @@ -1486,7 +1486,7 @@ static int __devinit viu_of_probe(struct platform_device *op, ad = i2c_get_adapter(0); viu_dev->decoder = v4l2_i2c_new_subdev(&viu_dev->v4l2_dev, ad, - NULL, "saa7113", VIU_VIDEO_DECODER_ADDR, NULL); + "saa7113", VIU_VIDEO_DECODER_ADDR, NULL); viu_dev->vidq.timeout.function = viu_vid_timeout; viu_dev->vidq.timeout.data = (unsigned long)viu_dev; diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index 9e8039ac909..665191c9b40 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -239,19 +239,16 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx) return -1; if (hw == IVTV_HW_TUNER) { /* special tuner handling */ - sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, - adap, NULL, type, - 0, itv->card_i2c->radio); + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0, + itv->card_i2c->radio); if (sd) sd->grp_id = 1 << idx; - sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, - adap, NULL, type, - 0, itv->card_i2c->demod); + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0, + itv->card_i2c->demod); if (sd) sd->grp_id = 1 << idx; - sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, - adap, NULL, type, - 0, itv->card_i2c->tv); + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0, + itv->card_i2c->tv); if (sd) sd->grp_id = 1 << idx; return sd ? 0 : -1; @@ -267,17 +264,16 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx) /* It's an I2C device other than an analog tuner or IR chip */ if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) { sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, - adap, NULL, type, 0, I2C_ADDRS(hw_addrs[idx])); + adap, type, 0, I2C_ADDRS(hw_addrs[idx])); } else if (hw == IVTV_HW_CX25840) { struct cx25840_platform_data pdata; pdata.pvr150_workaround = itv->pvr150_workaround; sd = v4l2_i2c_new_subdev_cfg(&itv->v4l2_dev, - adap, NULL, type, 0, &pdata, hw_addrs[idx], - NULL); + adap, type, 0, &pdata, hw_addrs[idx], NULL); } else { sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, - adap, NULL, type, hw_addrs[idx], NULL); + adap, type, hw_addrs[idx], NULL); } if (sd) sd->grp_id = 1 << idx; diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index 94ba698d0ad..4e8fd965f15 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -185,17 +185,17 @@ static int mxb_probe(struct saa7146_dev *dev) } mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - NULL, "saa7111", I2C_SAA7111A, NULL); + "saa7111", I2C_SAA7111A, NULL); mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - NULL, "tea6420", I2C_TEA6420_1, NULL); + "tea6420", I2C_TEA6420_1, NULL); mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - NULL, "tea6420", I2C_TEA6420_2, NULL); + "tea6420", I2C_TEA6420_2, NULL); mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - NULL, "tea6415c", I2C_TEA6415C, NULL); + "tea6415c", I2C_TEA6415C, NULL); mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - NULL, "tda9840", I2C_TDA9840, NULL); + "tda9840", I2C_TDA9840, NULL); mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - NULL, "tuner", I2C_TUNER, NULL); + "tuner", I2C_TUNER, NULL); /* check if all devices are present */ if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c || diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index bef202752cc..66ad516bdfd 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -2088,16 +2088,14 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, " Setting up with specified i2c address 0x%x", mid, i2caddr[0]); sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, - NULL, fname, - i2caddr[0], NULL); + fname, i2caddr[0], NULL); } else { pvr2_trace(PVR2_TRACE_INIT, "Module ID %u:" " Setting up with address probe list", mid); sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, - NULL, fname, - 0, i2caddr); + fname, 0, i2caddr); } if (!sd) { diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 26f7ad292ae..1b93207c89e 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -44,7 +44,7 @@ static struct v4l2_subdev *fimc_subdev_register(struct fimc_dev *fimc, return ERR_PTR(-ENOMEM); sd = v4l2_i2c_new_subdev_board(&vid_cap->v4l2_dev, i2c_adap, - NULL, isp_info->board_info, NULL); + isp_info->board_info, NULL); if (!sd) { v4l2_err(&vid_cap->v4l2_dev, "failed to acquire subdev\n"); return NULL; diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 0911cb580e1..1d4d0a49ea5 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -7551,22 +7551,22 @@ int saa7134_board_init2(struct saa7134_dev *dev) so we do not need to probe for a radio tuner device. */ if (dev->radio_type != UNSET) v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap, NULL, "tuner", + &dev->i2c_adap, "tuner", dev->radio_addr, NULL); if (has_demod) v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap, NULL, "tuner", + &dev->i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); if (dev->tuner_addr == ADDR_UNSET) { enum v4l2_i2c_tuner_type type = has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap, NULL, "tuner", + &dev->i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(type)); } else { v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap, NULL, "tuner", + &dev->i2c_adap, "tuner", dev->tuner_addr, NULL); } } diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 764d7d219fe..756a2781226 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -991,7 +991,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, if (card_is_empress(dev)) { struct v4l2_subdev *sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - NULL, "saa6752hs", + "saa6752hs", saa7134_boards[dev->board].empress_addr, NULL); if (sd) @@ -1002,7 +1002,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, struct v4l2_subdev *sd; sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap, NULL, "saa6588", + &dev->i2c_adap, "saa6588", 0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr)); if (sd) { printk(KERN_INFO "%s: found RDS decoder\n", dev->name); diff --git a/drivers/media/video/sh_vou.c b/drivers/media/video/sh_vou.c index 0f4906136b8..4e5a8cf76de 100644 --- a/drivers/media/video/sh_vou.c +++ b/drivers/media/video/sh_vou.c @@ -1406,7 +1406,7 @@ static int __devinit sh_vou_probe(struct platform_device *pdev) goto ereset; subdev = v4l2_i2c_new_subdev_board(&vou_dev->v4l2_dev, i2c_adap, - NULL, vou_pdata->board_info, NULL); + vou_pdata->board_info, NULL); if (!subdev) { ret = -ENOMEM; goto ei2cnd; diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 43848a751d1..335120c2021 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -896,7 +896,7 @@ static int soc_camera_init_i2c(struct soc_camera_device *icd, icl->board_info->platform_data = icd; subdev = v4l2_i2c_new_subdev_board(&ici->v4l2_dev, adap, - NULL, icl->board_info, NULL); + icl->board_info, NULL); if (!subdev) goto ei2cnd; diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index e3bbae26e3c..81dd53bb526 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -251,7 +251,7 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision) hit-and-miss. */ mdelay(10); v4l2_i2c_new_subdev(&usbvision->v4l2_dev, - &usbvision->i2c_adap, NULL, + &usbvision->i2c_adap, "saa7115_auto", 0, saa711x_addrs); break; } @@ -261,14 +261,14 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision) struct tuner_setup tun_setup; sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev, - &usbvision->i2c_adap, NULL, + &usbvision->i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); /* depending on whether we found a demod or not, select the tuner type. */ type = sd ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev, - &usbvision->i2c_adap, NULL, + &usbvision->i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(type)); if (sd == NULL) diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 9294282b5ad..b5eb1f3950b 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -368,18 +368,15 @@ EXPORT_SYMBOL_GPL(v4l2_i2c_subdev_init); /* Load an i2c sub-device. */ struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, - struct i2c_adapter *adapter, const char *module_name, - struct i2c_board_info *info, const unsigned short *probe_addrs) + struct i2c_adapter *adapter, struct i2c_board_info *info, + const unsigned short *probe_addrs) { struct v4l2_subdev *sd = NULL; struct i2c_client *client; BUG_ON(!v4l2_dev); - if (module_name) - request_module(module_name); - else - request_module(I2C_MODULE_PREFIX "%s", info->type); + request_module(I2C_MODULE_PREFIX "%s", info->type); /* Create the i2c client */ if (info->addr == 0 && probe_addrs) @@ -432,8 +429,7 @@ error: EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board); struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, - struct i2c_adapter *adapter, - const char *module_name, const char *client_type, + struct i2c_adapter *adapter, const char *client_type, int irq, void *platform_data, u8 addr, const unsigned short *probe_addrs) { @@ -447,8 +443,7 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, info.irq = irq; info.platform_data = platform_data; - return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name, - &info, probe_addrs); + return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, &info, probe_addrs); } EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg); diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c index 01bcdb44b5c..9eda7cc0312 100644 --- a/drivers/media/video/via-camera.c +++ b/drivers/media/video/via-camera.c @@ -1360,7 +1360,7 @@ static __devinit int viacam_probe(struct platform_device *pdev) */ sensor_adapter = viafb_find_i2c_adapter(VIA_PORT_31); cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, sensor_adapter, - NULL, "ov7670", 0x42 >> 1, NULL); + "ov7670", 0x42 >> 1, NULL); if (cam->sensor == NULL) { dev_err(&pdev->dev, "Unable to find the sensor!\n"); ret = -ENODEV; diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index e5e005dc155..7e7eec48f8b 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -4334,10 +4334,10 @@ static int __init vino_module_init(void) vino_drvdata->decoder = v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter, - NULL, "saa7191", 0, I2C_ADDRS(0x45)); + "saa7191", 0, I2C_ADDRS(0x45)); vino_drvdata->camera = v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter, - NULL, "indycam", 0, I2C_ADDRS(0x2b)); + "indycam", 0, I2C_ADDRS(0x2b)); dprintk("init complete!\n"); diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 7e6d62467ea..e520abf9f4c 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -1343,13 +1343,12 @@ static int __devinit zoran_probe(struct pci_dev *pdev, } zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev, - &zr->i2c_adapter, NULL, zr->card.i2c_decoder, + &zr->i2c_adapter, zr->card.i2c_decoder, 0, zr->card.addrs_decoder); if (zr->card.i2c_encoder) zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev, - &zr->i2c_adapter, - NULL, zr->card.i2c_encoder, + &zr->i2c_adapter, zr->card.i2c_encoder, 0, zr->card.addrs_encoder); dprintk(2, diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c index b3f42f37a31..48d4e483d8a 100644 --- a/drivers/staging/go7007/go7007-driver.c +++ b/drivers/staging/go7007/go7007-driver.c @@ -199,7 +199,7 @@ static int init_i2c_module(struct i2c_adapter *adapter, const char *type, struct go7007 *go = i2c_get_adapdata(adapter); struct v4l2_device *v4l2_dev = &go->v4l2_dev; - if (v4l2_i2c_new_subdev(v4l2_dev, adapter, NULL, type, addr, NULL)) + if (v4l2_i2c_new_subdev(v4l2_dev, adapter, type, addr, NULL)) return 0; printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", type); diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c index 664e6038090..b143258f094 100644 --- a/drivers/staging/tm6000/tm6000-cards.c +++ b/drivers/staging/tm6000/tm6000-cards.c @@ -545,7 +545,7 @@ static void tm6000_config_tuner(struct tm6000_core *dev) /* Load tuner module */ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - NULL, "tuner", dev->tuner_addr, NULL); + "tuner", dev->tuner_addr, NULL); memset(&tun_setup, 0, sizeof(tun_setup)); tun_setup.type = dev->tuner_type; @@ -683,7 +683,7 @@ static int tm6000_init_dev(struct tm6000_core *dev) if (dev->caps.has_tda9874) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - NULL, "tvaudio", I2C_ADDR_TDA9874, NULL); + "tvaudio", I2C_ADDR_TDA9874, NULL); /* register and initialize V4L2 */ rc = tm6000_v4l2_register(dev); diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 41dd480e45f..239125af3ea 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -137,31 +137,27 @@ struct v4l2_subdev_ops; /* Load an i2c module and return an initialized v4l2_subdev struct. - Only call request_module if module_name != NULL. The client_type argument is the name of the chip that's on the adapter. */ struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, - struct i2c_adapter *adapter, - const char *module_name, const char *client_type, + struct i2c_adapter *adapter, const char *client_type, int irq, void *platform_data, u8 addr, const unsigned short *probe_addrs); /* Load an i2c module and return an initialized v4l2_subdev struct. - Only call request_module if module_name != NULL. The client_type argument is the name of the chip that's on the adapter. */ static inline struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, - struct i2c_adapter *adapter, - const char *module_name, const char *client_type, + struct i2c_adapter *adapter, const char *client_type, u8 addr, const unsigned short *probe_addrs) { - return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, module_name, - client_type, 0, NULL, addr, probe_addrs); + return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, client_type, 0, NULL, + addr, probe_addrs); } struct i2c_board_info; struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, - struct i2c_adapter *adapter, const char *module_name, - struct i2c_board_info *info, const unsigned short *probe_addrs); + struct i2c_adapter *adapter, struct i2c_board_info *info, + const unsigned short *probe_addrs); /* Initialize an v4l2_subdev with data from an i2c_client struct */ void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client, -- cgit v1.2.3-70-g09d2 From f570e1dd8469d39420f406a4f5442c270b1e759e Mon Sep 17 00:00:00 2001 From: Tracey Dent Date: Sun, 7 Nov 2010 09:43:33 -0500 Subject: EDAC: Remove deprecated kbuild goal definitions Change EDAC's Makefile to use -y instead of -objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. [bp: Fixup commit message] [bp: Fixup indentation] Signed-off-by: Tracey Dent Signed-off-by: Borislav Petkov --- drivers/edac/Makefile | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index b3781399b38..ba2898b3639 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -10,16 +10,16 @@ obj-$(CONFIG_EDAC) := edac_stub.o obj-$(CONFIG_EDAC_MM_EDAC) += edac_core.o obj-$(CONFIG_EDAC_MCE) += edac_mce.o -edac_core-objs := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o -edac_core-objs += edac_module.o edac_device_sysfs.o +edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o +edac_core-y += edac_module.o edac_device_sysfs.o ifdef CONFIG_PCI -edac_core-objs += edac_pci.o edac_pci_sysfs.o +edac_core-y += edac_pci.o edac_pci_sysfs.o endif obj-$(CONFIG_EDAC_MCE_INJ) += mce_amd_inj.o -edac_mce_amd-objs := mce_amd.o +edac_mce_amd-y := mce_amd.o obj-$(CONFIG_EDAC_DECODE_MCE) += edac_mce_amd.o obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o -- cgit v1.2.3-70-g09d2 From df4b2a30e0b9e553abfd63ee75dbbd66be80f01a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 18 Nov 2010 22:05:43 -0500 Subject: EDAC, MCE: Fix edac_init_mce_inject error handling Otherwise, variable i will be -1 inside the latest iteration of the while loop. Signed-off-by: Axel Lin Signed-off-by: Borislav Petkov --- drivers/edac/mce_amd_inj.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c index 8d0688f36d4..39faded3cad 100644 --- a/drivers/edac/mce_amd_inj.c +++ b/drivers/edac/mce_amd_inj.c @@ -139,7 +139,7 @@ static int __init edac_init_mce_inject(void) return 0; err_sysfs_create: - while (i-- >= 0) + while (--i >= 0) sysfs_remove_file(mce_kobj, &sysfs_attrs[i]->attr); kobject_del(mce_kobj); -- cgit v1.2.3-70-g09d2 From 09910509ebc74643e94fe6f3feb4c23b019aeb34 Mon Sep 17 00:00:00 2001 From: Glenn Sommer Date: Mon, 22 Nov 2010 12:00:05 -0800 Subject: Input: usbtouchscreen - add support for LG Flatron T1710B I've recently got my hands on a LG Flatron T1710B touchscreen. As other LG products, this seems to use the ITM panel. Signed-off-by: Glenn Sommer Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/usbtouchscreen.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index f45f80f6d33..73fd6642b68 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -178,6 +178,7 @@ static const struct usb_device_id usbtouch_devices[] = { #ifdef CONFIG_TOUCHSCREEN_USB_ITM {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM}, + {USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM}, #endif #ifdef CONFIG_TOUCHSCREEN_USB_ETURBO -- cgit v1.2.3-70-g09d2 From d47844a014fada1a788719f6426bc7044f2a0fd8 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 20 Nov 2010 03:08:47 +0100 Subject: ath9k: fix timeout on stopping rx dma It seems that using ath9k_hw_stoppcurecv to stop rx dma is not enough. When it's time to stop DMA, the PCU is still busy, so the rx enable bit never clears. Using ath9k_hw_abortpcurecv helps with getting rx stopped much faster, with this change, I cannot reproduce the rx stop related WARN_ON anymore. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index c76ea53c20c..1a62e351ec7 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -518,7 +518,7 @@ bool ath_stoprecv(struct ath_softc *sc) bool stopped; spin_lock_bh(&sc->rx.rxbuflock); - ath9k_hw_stoppcurecv(ah); + ath9k_hw_abortpcurecv(ah); ath9k_hw_setrxfilter(ah, 0); stopped = ath9k_hw_stopdmarecv(ah); -- cgit v1.2.3-70-g09d2 From 1d8638d4038eb8709edc80e37a0bbb77253d86e9 Mon Sep 17 00:00:00 2001 From: Daniel Klaffenbach Date: Fri, 19 Nov 2010 21:25:21 -0600 Subject: ssb: b43-pci-bridge: Add new vendor for BCM4318 Add new vendor for Broadcom 4318. Signed-off-by: Daniel Klaffenbach Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/ssb/b43_pci_bridge.c | 1 + include/linux/pci_ids.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/ssb/b43_pci_bridge.c b/drivers/ssb/b43_pci_bridge.c index ef9c6a04ad8..744d3f6e470 100644 --- a/drivers/ssb/b43_pci_bridge.c +++ b/drivers/ssb/b43_pci_bridge.c @@ -24,6 +24,7 @@ static const struct pci_device_id b43_pci_bridge_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) }, + { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d278dd9cb76..f29c25ede70 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2043,6 +2043,7 @@ #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150 +#define PCI_VENDOR_ID_BCM_GVC 0x14a4 #define PCI_VENDOR_ID_BROADCOM 0x14e4 #define PCI_DEVICE_ID_TIGON3_5752 0x1600 #define PCI_DEVICE_ID_TIGON3_5752M 0x1601 -- cgit v1.2.3-70-g09d2 From b397492a8c1022887a9b2fb925fe92e69ce0ad4d Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 20 Nov 2010 13:15:27 +0100 Subject: carl9170: fix virtual interface setup crash This patch fixes a faulty bound check which caused a crash when too many virtual interface were brought up. BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: [] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: carl9170 [...] Pid: 4720, comm: wpa_supplicant Not tainted 2.6.37-rc2-wl+ EIP: 0060:[] EFLAGS: 00210206 CPU: 0 EIP is at carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] EAX: 00000000 ... Process wpa_supplicant Stack: f4f88f34 fffffff4 .. Call Trace: [] ? ieee80211_do_open+0x406/0x5c0 [mac80211] [...] Code: <89> 42 04 ... EIP: [] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] CR2: 0000000000000004 Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 980ae70ea42..a314c2c2bfb 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -647,7 +647,7 @@ init: } unlock: - if (err && (vif_id != -1)) { + if (err && (vif_id >= 0)) { vif_priv->active = false; bitmap_release_region(&ar->vif_bitmap, vif_id, 0); ar->vifs--; -- cgit v1.2.3-70-g09d2 From c89ad7372232b69fd37edf90d6f5d2a8d6381214 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Mon, 1 Nov 2010 19:08:50 +0000 Subject: Bluetooth: Fix not returning proper error in SCO Return 0 in that situation could lead to errors in the caller. Signed-off-by: Gustavo F. Padovan --- net/bluetooth/sco.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index d0927d1fdad..66b9e5c0523 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -882,7 +882,7 @@ static int sco_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 type) int lm = 0; if (type != SCO_LINK && type != ESCO_LINK) - return 0; + return -EINVAL; BT_DBG("hdev %s, bdaddr %s", hdev->name, batostr(bdaddr)); @@ -908,7 +908,7 @@ static int sco_connect_cfm(struct hci_conn *hcon, __u8 status) BT_DBG("hcon %p bdaddr %s status %d", hcon, batostr(&hcon->dst), status); if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK) - return 0; + return -EINVAL; if (!status) { struct sco_conn *conn; @@ -927,7 +927,7 @@ static int sco_disconn_cfm(struct hci_conn *hcon, __u8 reason) BT_DBG("hcon %p reason %d", hcon, reason); if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK) - return 0; + return -EINVAL; sco_conn_del(hcon, bt_err(reason)); -- cgit v1.2.3-70-g09d2 From c2d0879112825cddddd6c4f9b2645ff32acd6dc5 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 22 Nov 2010 16:31:35 -0800 Subject: xen: clean up "extra" memory handling some more Make sure that extra_pages is added for all E820_RAM regions beyond mem_end - completely excluded regions as well as the remains of partially included regions. Also makes sure the extra region is not unnecessarily high, and simplifies the logic to decide which regions should be added. Signed-off-by: Jeremy Fitzhardinge --- arch/x86/xen/setup.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 38fdffaa71d..b85dceef56f 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -182,24 +182,21 @@ char * __init xen_memory_setup(void) for (i = 0; i < memmap.nr_entries; i++) { unsigned long long end = map[i].addr + map[i].size; - if (map[i].type == E820_RAM) { - if (map[i].addr < mem_end && end > mem_end) { - /* Truncate region to max_mem. */ - u64 delta = end - mem_end; + if (map[i].type == E820_RAM && end > mem_end) { + /* RAM off the end - may be partially included */ + u64 delta = min(map[i].size, end - mem_end); - map[i].size -= delta; - extra_pages += PFN_DOWN(delta); + map[i].size -= delta; + end -= delta; - end = mem_end; - } + extra_pages += PFN_DOWN(delta); } - if (end > xen_extra_mem_start) + if (map[i].size > 0 && end > xen_extra_mem_start) xen_extra_mem_start = end; - /* If region is non-RAM or below mem_end, add what remains */ - if ((map[i].type != E820_RAM || map[i].addr < mem_end) && - map[i].size > 0) + /* Add region if any remains */ + if (map[i].size > 0) e820_add_region(map[i].addr, map[i].size, map[i].type); } -- cgit v1.2.3-70-g09d2 From bc15fde77fc5d9ec2eec6066a5ab554ea1266a0a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 22 Nov 2010 17:17:50 -0800 Subject: xen: use default_idle We just need the idle loop to drop into safe_halt, which default_idle() is perfectly capable of doing. There's no need to duplicate it. Signed-off-by: Jeremy Fitzhardinge --- arch/x86/xen/setup.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index b85dceef56f..95fb68a8c20 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -250,20 +250,6 @@ char * __init xen_memory_setup(void) return "Xen"; } -static void xen_idle(void) -{ - local_irq_disable(); - - if (need_resched()) - local_irq_enable(); - else { - current_thread_info()->status &= ~TS_POLLING; - smp_mb__after_clear_bit(); - safe_halt(); - current_thread_info()->status |= TS_POLLING; - } -} - /* * Set the bit indicating "nosegneg" library variants should be used. * We only need to bother in pure 32-bit mode; compat 32-bit processes @@ -360,7 +346,11 @@ void __init xen_arch_setup(void) MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ? COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE); - pm_idle = xen_idle; + /* Set up idle, making sure it calls safe_halt() pvop */ +#ifdef CONFIG_X86_32 + boot_cpu_data.hlt_works_ok = 1; +#endif + pm_idle = default_idle; fiddle_vdso(); } -- cgit v1.2.3-70-g09d2 From e476a5a41ad67d0e2b4a652820c49a3923eb936b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 23 Nov 2010 17:10:24 +0100 Subject: wireless: b43: fix error path in SDIO Fix unbalanced call to sdio_release_host() on the error path. Signed-off-by: Guennadi Liakhovetski Acked-by: Larry Finger Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/b43/sdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/b43/sdio.c b/drivers/net/wireless/b43/sdio.c index 9a55338d957..09e2dfd7b17 100644 --- a/drivers/net/wireless/b43/sdio.c +++ b/drivers/net/wireless/b43/sdio.c @@ -163,6 +163,7 @@ static int b43_sdio_probe(struct sdio_func *func, err_free_ssb: kfree(sdio); err_disable_func: + sdio_claim_host(func); sdio_disable_func(func); err_release_host: sdio_release_host(func); -- cgit v1.2.3-70-g09d2 From bcf50e2775bbc3101932d8e4ab8c7902aa4163b4 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 21 Nov 2010 22:07:12 +0000 Subject: drm/i915: Handle pagefaults in execbuffer user relocations Currently if we hit a pagefault when applying a user relocation for the execbuffer, we bail and return EFAULT to the application. Instead, we need to unwind, drop the dev->struct_mutex, copy all the relocation entries to a vmalloc array (to avoid any potential circular deadlocks when resolving the pagefault), retake the mutex and then apply the relocations. Afterwards, we need to again drop the lock and copy the vmalloc array back to userspace. v2: Incorporate feedback from Daniel Vetter. Reported-by: Daniel Vetter Signed-off-by: Chris Wilson Reviewed-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 461 +++++++++++++++++++++++++--------------- 1 file changed, 293 insertions(+), 168 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index bc416459005..92b097dbe4f 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3254,192 +3254,230 @@ i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, return 0; } -/** - * Pin an object to the GTT and evaluate the relocations landing in it. - */ static int -i915_gem_execbuffer_relocate(struct drm_i915_gem_object *obj, - struct drm_file *file_priv, - struct drm_i915_gem_exec_object2 *entry) +i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, + struct drm_file *file_priv, + struct drm_i915_gem_exec_object2 *entry, + struct drm_i915_gem_relocation_entry *reloc) { struct drm_device *dev = obj->base.dev; - drm_i915_private_t *dev_priv = dev->dev_private; - struct drm_i915_gem_relocation_entry __user *user_relocs; - struct drm_gem_object *target_obj = NULL; - uint32_t target_handle = 0; - int i, ret = 0; + struct drm_gem_object *target_obj; + uint32_t target_offset; + int ret = -EINVAL; - user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr; - for (i = 0; i < entry->relocation_count; i++) { - struct drm_i915_gem_relocation_entry reloc; - uint32_t target_offset; + target_obj = drm_gem_object_lookup(dev, file_priv, + reloc->target_handle); + if (target_obj == NULL) + return -ENOENT; - if (__copy_from_user_inatomic(&reloc, - user_relocs+i, - sizeof(reloc))) { - ret = -EFAULT; - break; - } + target_offset = to_intel_bo(target_obj)->gtt_offset; - if (reloc.target_handle != target_handle) { - drm_gem_object_unreference(target_obj); +#if WATCH_RELOC + DRM_INFO("%s: obj %p offset %08x target %d " + "read %08x write %08x gtt %08x " + "presumed %08x delta %08x\n", + __func__, + obj, + (int) reloc->offset, + (int) reloc->target_handle, + (int) reloc->read_domains, + (int) reloc->write_domain, + (int) target_offset, + (int) reloc->presumed_offset, + reloc->delta); +#endif - target_obj = drm_gem_object_lookup(dev, file_priv, - reloc.target_handle); - if (target_obj == NULL) { - ret = -ENOENT; - break; - } + /* The target buffer should have appeared before us in the + * exec_object list, so it should have a GTT space bound by now. + */ + if (target_offset == 0) { + DRM_ERROR("No GTT space found for object %d\n", + reloc->target_handle); + goto err; + } - target_handle = reloc.target_handle; - } - target_offset = to_intel_bo(target_obj)->gtt_offset; + /* Validate that the target is in a valid r/w GPU domain */ + if (reloc->write_domain & (reloc->write_domain - 1)) { + DRM_ERROR("reloc with multiple write domains: " + "obj %p target %d offset %d " + "read %08x write %08x", + obj, reloc->target_handle, + (int) reloc->offset, + reloc->read_domains, + reloc->write_domain); + goto err; + } + if (reloc->write_domain & I915_GEM_DOMAIN_CPU || + reloc->read_domains & I915_GEM_DOMAIN_CPU) { + DRM_ERROR("reloc with read/write CPU domains: " + "obj %p target %d offset %d " + "read %08x write %08x", + obj, reloc->target_handle, + (int) reloc->offset, + reloc->read_domains, + reloc->write_domain); + goto err; + } + if (reloc->write_domain && target_obj->pending_write_domain && + reloc->write_domain != target_obj->pending_write_domain) { + DRM_ERROR("Write domain conflict: " + "obj %p target %d offset %d " + "new %08x old %08x\n", + obj, reloc->target_handle, + (int) reloc->offset, + reloc->write_domain, + target_obj->pending_write_domain); + goto err; + } -#if WATCH_RELOC - DRM_INFO("%s: obj %p offset %08x target %d " - "read %08x write %08x gtt %08x " - "presumed %08x delta %08x\n", - __func__, - obj, - (int) reloc.offset, - (int) reloc.target_handle, - (int) reloc.read_domains, - (int) reloc.write_domain, - (int) target_offset, - (int) reloc.presumed_offset, - reloc.delta); -#endif + target_obj->pending_read_domains |= reloc->read_domains; + target_obj->pending_write_domain |= reloc->write_domain; - /* The target buffer should have appeared before us in the - * exec_object list, so it should have a GTT space bound by now. - */ - if (target_offset == 0) { - DRM_ERROR("No GTT space found for object %d\n", - reloc.target_handle); - ret = -EINVAL; - break; - } + /* If the relocation already has the right value in it, no + * more work needs to be done. + */ + if (target_offset == reloc->presumed_offset) + goto out; - /* Validate that the target is in a valid r/w GPU domain */ - if (reloc.write_domain & (reloc.write_domain - 1)) { - DRM_ERROR("reloc with multiple write domains: " - "obj %p target %d offset %d " - "read %08x write %08x", - obj, reloc.target_handle, - (int) reloc.offset, - reloc.read_domains, - reloc.write_domain); - ret = -EINVAL; - break; - } - if (reloc.write_domain & I915_GEM_DOMAIN_CPU || - reloc.read_domains & I915_GEM_DOMAIN_CPU) { - DRM_ERROR("reloc with read/write CPU domains: " - "obj %p target %d offset %d " - "read %08x write %08x", - obj, reloc.target_handle, - (int) reloc.offset, - reloc.read_domains, - reloc.write_domain); - ret = -EINVAL; - break; - } - if (reloc.write_domain && target_obj->pending_write_domain && - reloc.write_domain != target_obj->pending_write_domain) { - DRM_ERROR("Write domain conflict: " - "obj %p target %d offset %d " - "new %08x old %08x\n", - obj, reloc.target_handle, - (int) reloc.offset, - reloc.write_domain, - target_obj->pending_write_domain); - ret = -EINVAL; - break; - } + /* Check that the relocation address is valid... */ + if (reloc->offset > obj->base.size - 4) { + DRM_ERROR("Relocation beyond object bounds: " + "obj %p target %d offset %d size %d.\n", + obj, reloc->target_handle, + (int) reloc->offset, + (int) obj->base.size); + goto err; + } + if (reloc->offset & 3) { + DRM_ERROR("Relocation not 4-byte aligned: " + "obj %p target %d offset %d.\n", + obj, reloc->target_handle, + (int) reloc->offset); + goto err; + } - target_obj->pending_read_domains |= reloc.read_domains; - target_obj->pending_write_domain |= reloc.write_domain; + /* and points to somewhere within the target object. */ + if (reloc->delta >= target_obj->size) { + DRM_ERROR("Relocation beyond target object bounds: " + "obj %p target %d delta %d size %d.\n", + obj, reloc->target_handle, + (int) reloc->delta, + (int) target_obj->size); + goto err; + } - /* If the relocation already has the right value in it, no - * more work needs to be done. - */ - if (target_offset == reloc.presumed_offset) - continue; + reloc->delta += target_offset; + if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) { + uint32_t page_offset = reloc->offset & ~PAGE_MASK; + char *vaddr; - /* Check that the relocation address is valid... */ - if (reloc.offset > obj->base.size - 4) { - DRM_ERROR("Relocation beyond object bounds: " - "obj %p target %d offset %d size %d.\n", - obj, reloc.target_handle, - (int) reloc.offset, (int) obj->base.size); - ret = -EINVAL; - break; - } - if (reloc.offset & 3) { - DRM_ERROR("Relocation not 4-byte aligned: " - "obj %p target %d offset %d.\n", - obj, reloc.target_handle, - (int) reloc.offset); - ret = -EINVAL; - break; - } + vaddr = kmap_atomic(obj->pages[reloc->offset >> PAGE_SHIFT]); + *(uint32_t *)(vaddr + page_offset) = reloc->delta; + kunmap_atomic(vaddr); + } else { + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t __iomem *reloc_entry; + void __iomem *reloc_page; - /* and points to somewhere within the target object. */ - if (reloc.delta >= target_obj->size) { - DRM_ERROR("Relocation beyond target object bounds: " - "obj %p target %d delta %d size %d.\n", - obj, reloc.target_handle, - (int) reloc.delta, (int) target_obj->size); - ret = -EINVAL; - break; - } + ret = i915_gem_object_set_to_gtt_domain(&obj->base, 1); + if (ret) + goto err; - reloc.delta += target_offset; - if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) { - uint32_t page_offset = reloc.offset & ~PAGE_MASK; - char *vaddr; + /* Map the page containing the relocation we're going to perform. */ + reloc->offset += obj->gtt_offset; + reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping, + reloc->offset & PAGE_MASK); + reloc_entry = (uint32_t __iomem *) + (reloc_page + (reloc->offset & ~PAGE_MASK)); + iowrite32(reloc->delta, reloc_entry); + io_mapping_unmap_atomic(reloc_page); + } - vaddr = kmap_atomic(obj->pages[reloc.offset >> PAGE_SHIFT]); - *(uint32_t *)(vaddr + page_offset) = reloc.delta; - kunmap_atomic(vaddr); - } else { - uint32_t __iomem *reloc_entry; - void __iomem *reloc_page; + /* and update the user's relocation entry */ + reloc->presumed_offset = target_offset; - ret = i915_gem_object_set_to_gtt_domain(&obj->base, 1); - if (ret) - break; +out: + ret = 0; +err: + drm_gem_object_unreference(target_obj); + return ret; +} - /* Map the page containing the relocation we're going to perform. */ - reloc.offset += obj->gtt_offset; - reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping, - reloc.offset & PAGE_MASK); - reloc_entry = (uint32_t __iomem *) - (reloc_page + (reloc.offset & ~PAGE_MASK)); - iowrite32(reloc.delta, reloc_entry); - io_mapping_unmap_atomic(reloc_page); - } +static int +i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj, + struct drm_file *file_priv, + struct drm_i915_gem_exec_object2 *entry) +{ + struct drm_i915_gem_relocation_entry __user *user_relocs; + int i, ret; + + user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr; + for (i = 0; i < entry->relocation_count; i++) { + struct drm_i915_gem_relocation_entry reloc; + + if (__copy_from_user_inatomic(&reloc, + user_relocs+i, + sizeof(reloc))) + return -EFAULT; + + ret = i915_gem_execbuffer_relocate_entry(obj, file_priv, entry, &reloc); + if (ret) + return ret; - /* and update the user's relocation entry */ - reloc.presumed_offset = target_offset; if (__copy_to_user_inatomic(&user_relocs[i].presumed_offset, - &reloc.presumed_offset, - sizeof(reloc.presumed_offset))) { - ret = -EFAULT; - break; - } + &reloc.presumed_offset, + sizeof(reloc.presumed_offset))) + return -EFAULT; } - drm_gem_object_unreference(target_obj); - return ret; + return 0; +} + +static int +i915_gem_execbuffer_relocate_object_slow(struct drm_i915_gem_object *obj, + struct drm_file *file_priv, + struct drm_i915_gem_exec_object2 *entry, + struct drm_i915_gem_relocation_entry *relocs) +{ + int i, ret; + + for (i = 0; i < entry->relocation_count; i++) { + ret = i915_gem_execbuffer_relocate_entry(obj, file_priv, entry, &relocs[i]); + if (ret) + return ret; + } + + return 0; +} + +static int +i915_gem_execbuffer_relocate(struct drm_device *dev, + struct drm_file *file, + struct drm_gem_object **object_list, + struct drm_i915_gem_exec_object2 *exec_list, + int count) +{ + int i, ret; + + for (i = 0; i < count; i++) { + struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]); + obj->base.pending_read_domains = 0; + obj->base.pending_write_domain = 0; + ret = i915_gem_execbuffer_relocate_object(obj, file, + &exec_list[i]); + if (ret) + return ret; + } + + return 0; } static int -i915_gem_execbuffer_pin(struct drm_device *dev, - struct drm_file *file, - struct drm_gem_object **object_list, - struct drm_i915_gem_exec_object2 *exec_list, - int count) +i915_gem_execbuffer_reserve(struct drm_device *dev, + struct drm_file *file, + struct drm_gem_object **object_list, + struct drm_i915_gem_exec_object2 *exec_list, + int count) { struct drm_i915_private *dev_priv = dev->dev_private; int ret, i, retry; @@ -3501,6 +3539,87 @@ i915_gem_execbuffer_pin(struct drm_device *dev, return 0; } +static int +i915_gem_execbuffer_relocate_slow(struct drm_device *dev, + struct drm_file *file, + struct drm_gem_object **object_list, + struct drm_i915_gem_exec_object2 *exec_list, + int count) +{ + struct drm_i915_gem_relocation_entry *reloc; + int i, total, ret; + + for (i = 0; i < count; i++) { + struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]); + obj->in_execbuffer = false; + } + + mutex_unlock(&dev->struct_mutex); + + total = 0; + for (i = 0; i < count; i++) + total += exec_list[i].relocation_count; + + reloc = drm_malloc_ab(total, sizeof(*reloc)); + if (reloc == NULL) { + mutex_lock(&dev->struct_mutex); + return -ENOMEM; + } + + total = 0; + for (i = 0; i < count; i++) { + struct drm_i915_gem_relocation_entry __user *user_relocs; + + user_relocs = (void __user *)(uintptr_t)exec_list[i].relocs_ptr; + + if (copy_from_user(reloc+total, user_relocs, + exec_list[i].relocation_count * + sizeof(*reloc))) { + ret = -EFAULT; + mutex_lock(&dev->struct_mutex); + goto err; + } + + total += exec_list[i].relocation_count; + } + + ret = i915_mutex_lock_interruptible(dev); + if (ret) { + mutex_lock(&dev->struct_mutex); + goto err; + } + + ret = i915_gem_execbuffer_reserve(dev, file, + object_list, exec_list, + count); + if (ret) + goto err; + + total = 0; + for (i = 0; i < count; i++) { + struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]); + obj->base.pending_read_domains = 0; + obj->base.pending_write_domain = 0; + ret = i915_gem_execbuffer_relocate_object_slow(obj, file, + &exec_list[i], + reloc + total); + if (ret) + goto err; + + total += exec_list[i].relocation_count; + } + + /* Leave the user relocations as are, this is the painfully slow path, + * and we want to avoid the complication of dropping the lock whilst + * having buffers reserved in the aperture and so causing spurious + * ENOSPC for random operations. + */ + +err: + drm_free_large(reloc); + return ret; +} + static int i915_gem_execbuffer_move_to_gpu(struct drm_device *dev, struct drm_file *file, @@ -3781,18 +3900,24 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, } /* Move the objects en-masse into the GTT, evicting if necessary. */ - ret = i915_gem_execbuffer_pin(dev, file, - object_list, exec_list, - args->buffer_count); + ret = i915_gem_execbuffer_reserve(dev, file, + object_list, exec_list, + args->buffer_count); if (ret) goto err; /* The objects are in their final locations, apply the relocations. */ - for (i = 0; i < args->buffer_count; i++) { - struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]); - obj->base.pending_read_domains = 0; - obj->base.pending_write_domain = 0; - ret = i915_gem_execbuffer_relocate(obj, file, &exec_list[i]); + ret = i915_gem_execbuffer_relocate(dev, file, + object_list, exec_list, + args->buffer_count); + if (ret) { + if (ret == -EFAULT) { + ret = i915_gem_execbuffer_relocate_slow(dev, file, + object_list, + exec_list, + args->buffer_count); + BUG_ON(!mutex_is_locked(&dev->struct_mutex)); + } if (ret) goto err; } -- cgit v1.2.3-70-g09d2 From 0c1dab89ee0e483f382391d6aec77db4affb0931 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 23 Nov 2010 22:37:01 +0000 Subject: drm/i915/sdvo: Always fallback to querying the shared DDC line On a few devices, like the Mac Mini, the CRT DDC pins are shared between the analog connector and the digital connector. In this scenario, rely on the EDID to determine if a digital panel is connected to the digital connector. Reported-and-tested-by: Tino Keitel Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_sdvo.c | 51 +++++---------------------------------- 1 file changed, 6 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 843182528b7..bf643100dec 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1296,55 +1296,14 @@ intel_sdvo_get_edid(struct drm_connector *connector) return drm_get_edid(connector, &sdvo->ddc); } -static struct drm_connector * -intel_find_analog_connector(struct drm_device *dev) -{ - struct drm_connector *connector; - struct intel_sdvo *encoder; - - list_for_each_entry(encoder, - &dev->mode_config.encoder_list, - base.base.head) { - if (encoder->base.type == INTEL_OUTPUT_ANALOG) { - list_for_each_entry(connector, - &dev->mode_config.connector_list, - head) { - if (&encoder->base == - intel_attached_encoder(connector)) - return connector; - } - } - } - - return NULL; -} - -static int -intel_analog_is_connected(struct drm_device *dev) -{ - struct drm_connector *analog_connector; - - analog_connector = intel_find_analog_connector(dev); - if (!analog_connector) - return false; - - if (analog_connector->funcs->detect(analog_connector, false) == - connector_status_disconnected) - return false; - - return true; -} - /* Mac mini hack -- use the same DDC as the analog connector */ static struct edid * intel_sdvo_get_analog_edid(struct drm_connector *connector) { struct drm_i915_private *dev_priv = connector->dev->dev_private; - if (!intel_analog_is_connected(connector->dev)) - return NULL; - - return drm_get_edid(connector, &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter); + return drm_get_edid(connector, + &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter); } enum drm_connector_status @@ -1475,8 +1434,10 @@ static void intel_sdvo_get_ddc_modes(struct drm_connector *connector) edid = intel_sdvo_get_analog_edid(connector); if (edid != NULL) { - drm_mode_connector_update_edid_property(connector, edid); - drm_add_edid_modes(connector, edid); + if (edid->input & DRM_EDID_INPUT_DIGITAL) { + drm_mode_connector_update_edid_property(connector, edid); + drm_add_edid_modes(connector, edid); + } connector->display_info.raw_edid = NULL; kfree(edid); } -- cgit v1.2.3-70-g09d2 From cc840f77036fa0a141951967cd010014f088b5e0 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 23 Nov 2010 22:36:42 -0800 Subject: MAINTAINERS: INTEL DRM DRIVERS list (intel-gfx) is subscribers-only Mark it so. Signed-off-by: Joe Perches Signed-off-by: Chris Wilson --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index a92c994ba93..86f9bb60d08 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2080,7 +2080,7 @@ F: include/drm/ INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets) M: Chris Wilson -L: intel-gfx@lists.freedesktop.org +L: intel-gfx@lists.freedesktop.org (subscribers-only) L: dri-devel@lists.freedesktop.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git S: Supported -- cgit v1.2.3-70-g09d2 From c72b844ed2f55c442b464e382a2eb2ecab5292a8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 22 Oct 2010 16:18:47 -0700 Subject: ibm_rtl: fix printk format warning Fix printk format warning: drivers/platform/x86/ibm_rtl.c:305:warning: format '%#llx' expects type 'long long unsigned int', but argument 2 has type 'phys_addr_t' Signed-off-by: Randy Dunlap Cc: Keith Mannthey Cc: Vernon Mauery Cc: platform-driver-x86@vger.kernel.org Cc: Matthew Garrett Signed-off-by: Matthew Garrett --- drivers/platform/x86/ibm_rtl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c index 3c2c6b91ecb..a884f549884 100644 --- a/drivers/platform/x86/ibm_rtl.c +++ b/drivers/platform/x86/ibm_rtl.c @@ -302,7 +302,7 @@ static int __init ibm_rtl_init(void) { RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n", rtl_cmd_width, rtl_cmd_type); addr = ioread32(&rtl_table->cmd_port_address); - RTL_DEBUG("addr = %#llx\n", addr); + RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr); plen = rtl_cmd_width/sizeof(char); rtl_cmd_addr = rtl_port_map(addr, plen); RTL_DEBUG("rtl_cmd_addr = %#llx\n", (u64)rtl_cmd_addr); -- cgit v1.2.3-70-g09d2 From a49010f53b723ed0711d645ec43bde498c6756dc Mon Sep 17 00:00:00 2001 From: Jon Dowland Date: Wed, 27 Oct 2010 00:24:59 +0100 Subject: toshiba_acpi.c: Add key_entry for a lone FN keypress MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A lone FN key press on a Toshiba Portégé R700 without another key in conjunction results in an ACPI event and a spurious error message on the console. Add a key entry to map this event to a KEY_FN keypress. This prevents the console message. Signed-off-by: Jon Dowland Signed-off-by: Matthew Garrett --- drivers/platform/x86/toshiba_acpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 06f304f46e0..4276da7291b 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -135,6 +135,7 @@ static const struct key_entry toshiba_acpi_keymap[] __initconst = { { KE_KEY, 0x141, { KEY_BRIGHTNESSUP } }, { KE_KEY, 0x142, { KEY_WLAN } }, { KE_KEY, 0x143, { KEY_PROG1 } }, + { KE_KEY, 0x17f, { KEY_FN } }, { KE_KEY, 0xb05, { KEY_PROG2 } }, { KE_KEY, 0xb06, { KEY_WWW } }, { KE_KEY, 0xb07, { KEY_MAIL } }, -- cgit v1.2.3-70-g09d2 From e599ab2556006398ba9aad536a58eedad515e807 Mon Sep 17 00:00:00 2001 From: Chris Bagwell Date: Mon, 25 Oct 2010 21:08:39 -0500 Subject: eeepc-wmi: add cpufv sysfs documentation Based on cpufv text from sysfs-platform-eeepc-laptop that has almost same behavior. Signed-off-by: Chris Bagwell Signed-off-by: Matthew Garrett Acked-by: Corentin Chary --- Documentation/ABI/testing/sysfs-platform-eeepc-wmi | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-platform-eeepc-wmi diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-wmi b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi new file mode 100644 index 00000000000..e4b5fef5fad --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi @@ -0,0 +1,10 @@ +What: /sys/devices/platform/eeepc-wmi/cpufv +Date: Oct 2010 +KernelVersion: 2.6.37 +Contact: "Corentin Chary" +Description: + Change CPU clock configuration (write-only). + There are three available clock configuration: + * 0 -> Super Performance Mode + * 1 -> High Performance Mode + * 2 -> Power Saving Mode -- cgit v1.2.3-70-g09d2 From d41014b92d60a6b375aad9b6ebc52201ee58df70 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 26 Oct 2010 12:25:37 +0200 Subject: drivers/platform/x86/thinkpad_acpi.c: delete double assignment Delete successive assignments to the same location. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression i; @@ *i = ...; i = ...; // Signed-off-by: Julia Lawall Signed-off-by: Matthew Garrett --- drivers/platform/x86/thinkpad_acpi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 2d61186ad5a..e8c21994b36 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -8497,7 +8497,6 @@ static void ibm_exit(struct ibm_struct *ibm) ibm->acpi->type, dispatch_acpi_notify); ibm->flags.acpi_notify_installed = 0; - ibm->flags.acpi_notify_installed = 0; } if (ibm->flags.proc_created) { -- cgit v1.2.3-70-g09d2 From a2262260f9eaee4acd56b5624b5d2bf4be9bb38a Mon Sep 17 00:00:00 2001 From: Vernon Mauery Date: Tue, 2 Nov 2010 13:08:10 -0700 Subject: ibm_rtl: Loosen the DMI criteria to all IBM machines Allow all IBM machines to pass the DMI check so that we don't have to add them one by one to the driver. Any IBM machine that has the _RTL_ table in the EBDA will work. Signed-off-by: Vernon Mauery Signed-off-by: Matthew Garrett --- drivers/platform/x86/ibm_rtl.c | 29 +++++------------------------ 1 file changed, 5 insertions(+), 24 deletions(-) diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c index a884f549884..5c975edb3c8 100644 --- a/drivers/platform/x86/ibm_rtl.c +++ b/drivers/platform/x86/ibm_rtl.c @@ -220,32 +220,13 @@ static void rtl_teardown_sysfs(void) { sysdev_class_unregister(&class_rtl); } -static int dmi_check_cb(const struct dmi_system_id *id) -{ - RTL_DEBUG("found IBM server '%s'\n", id->ident); - return 0; -} - -#define ibm_dmi_entry(NAME, TYPE) \ -{ \ - .ident = NAME, \ - .matches = { \ - DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \ - DMI_MATCH(DMI_PRODUCT_NAME, TYPE), \ - }, \ - .callback = dmi_check_cb \ -} static struct dmi_system_id __initdata ibm_rtl_dmi_table[] = { - ibm_dmi_entry("BladeCenter LS21", "7971"), - ibm_dmi_entry("BladeCenter LS22", "7901"), - ibm_dmi_entry("BladeCenter HS21 XM", "7995"), - ibm_dmi_entry("BladeCenter HS22", "7870"), - ibm_dmi_entry("BladeCenter HS22V", "7871"), - ibm_dmi_entry("System x3550 M2", "7946"), - ibm_dmi_entry("System x3650 M2", "7947"), - ibm_dmi_entry("System x3550 M3", "7944"), - ibm_dmi_entry("System x3650 M3", "7945"), + { \ + .matches = { \ + DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \ + }, \ + }, { } }; -- cgit v1.2.3-70-g09d2 From 1d37db77c1aa199ae9a4114af7c0412c8417e949 Mon Sep 17 00:00:00 2001 From: Vernon Mauery Date: Tue, 2 Nov 2010 13:08:11 -0700 Subject: ibm_rtl: _RTL_ is not available in UEFI mode Some of the IBM servers that are supported by ibm_rtl can run in both Legacy mode (BIOS) and in UEFI mode. When running in UEFI mode, it is possible that the EBDA table exists but cannot be mapped and reports errors. We need to make sure that by default we don't try to probe the machines if they are running in UEFI mode. Signed-off-by: Vernon Mauery Signed-off-by: Matthew Garrett --- drivers/platform/x86/ibm_rtl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c index 5c975edb3c8..94a114aa8e2 100644 --- a/drivers/platform/x86/ibm_rtl.c +++ b/drivers/platform/x86/ibm_rtl.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -238,7 +239,7 @@ static int __init ibm_rtl_init(void) { if (force) pr_warning("ibm-rtl: module loaded by force\n"); /* first ensure that we are running on IBM HW */ - else if (!dmi_check_system(ibm_rtl_dmi_table)) + else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table)) return -ENODEV; /* Get the address for the Extended BIOS Data Area */ -- cgit v1.2.3-70-g09d2 From 67fa38ec097a3e270ab175636338185017b49fa7 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 3 Nov 2010 11:14:01 -0700 Subject: eeepc-wmi: fix compiler warning This fixes the following: CC [M] drivers/platform/x86/eeepc-wmi.o drivers/platform/x86/eeepc-wmi.c:322: warning: initialization from incompatible pointer type Signed-off-by: Dmitry Torokhov Signed-off-by: Matthew Garrett --- drivers/platform/x86/eeepc-wmi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c index 462ceab93f8..0d50fbbe247 100644 --- a/drivers/platform/x86/eeepc-wmi.c +++ b/drivers/platform/x86/eeepc-wmi.c @@ -298,8 +298,8 @@ static void eeepc_wmi_notify(u32 value, void *context) kfree(obj); } -static int store_cpufv(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t store_cpufv(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { int value; struct acpi_buffer input = { (acpi_size)sizeof(value), &value }; -- cgit v1.2.3-70-g09d2 From ba1ff5be52163a97ac4ce8bc51beae2c96861a43 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Sun, 14 Nov 2010 17:40:12 +0100 Subject: asus-laptop: add wimax and wwan support Asus UL30A has a 3G chip, but the radio is disabled by default. The DSDT also reference a WIMAX device, which is not present on this model. This patch adds two new files: wwan and wimax to control WWAN and WIMAX devices. It does not use rfkill, because like WLED and BLED, we don't know yet that the two ACPI functions will always control the radio, they may control only the leds on some hardware. We may add rfkill switchs later. Signed-off-by: Corentin Chary Signed-off-by: Matthew Garrett --- .../ABI/testing/sysfs-platform-asus-laptop | 16 +++- drivers/platform/x86/asus-laptop.c | 97 +++++++++++++++++++++- 2 files changed, 111 insertions(+), 2 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop index 1d775390e85..41ff8ae4dee 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-laptop +++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop @@ -47,6 +47,20 @@ Date: January 2007 KernelVersion: 2.6.20 Contact: "Corentin Chary" Description: - Control the bluetooth device. 1 means on, 0 means off. + Control the wlan device. 1 means on, 0 means off. This may control the led, the device or both. Users: Lapsus + +What: /sys/devices/platform/asus_laptop/wimax +Date: October 2010 +KernelVersion: 2.6.37 +Contact: "Corentin Chary" +Description: + Control the wimax device. 1 means on, 0 means off. + +What: /sys/devices/platform/asus_laptop/wwan +Date: October 2010 +KernelVersion: 2.6.37 +Contact: "Corentin Chary" +Description: + Control the wwan (3G) device. 1 means on, 0 means off. diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index 60a5a5c6b50..d235f44fd7a 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -81,6 +81,8 @@ MODULE_PARM_DESC(wapf, "WAPF value"); static int wlan_status = 1; static int bluetooth_status = 1; +static int wimax_status = -1; +static int wwan_status = -1; module_param(wlan_status, int, 0444); MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot " @@ -92,6 +94,16 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot " "(0 = disabled, 1 = enabled, -1 = don't do anything). " "default is 1"); +module_param(wimax_status, int, 0444); +MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot " + "(0 = disabled, 1 = enabled, -1 = don't do anything). " + "default is 1"); + +module_param(wwan_status, int, 0444); +MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot " + "(0 = disabled, 1 = enabled, -1 = don't do anything). " + "default is 1"); + /* * Some events we use, same for all Asus */ @@ -114,6 +126,8 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot " */ #define WL_RSTS 0x01 /* internal Wifi */ #define BT_RSTS 0x02 /* internal Bluetooth */ +#define WM_RSTS 0x08 /* internal wimax */ +#define WW_RSTS 0x20 /* internal wwan */ /* LED */ #define METHOD_MLED "MLED" @@ -132,6 +146,11 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot " */ #define METHOD_WLAN "WLED" #define METHOD_BLUETOOTH "BLED" + +/* WWAN and WIMAX */ +#define METHOD_WWAN "GSMC" +#define METHOD_WIMAX "WMXC" + #define METHOD_WL_STATUS "RSTS" /* Brightness */ @@ -882,6 +901,64 @@ static ssize_t store_bluetooth(struct device *dev, return sysfs_acpi_set(asus, buf, count, METHOD_BLUETOOTH); } +/* + * Wimax + */ +static int asus_wimax_set(struct asus_laptop *asus, int status) +{ + if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) { + pr_warning("Error setting wimax status to %d", status); + return -EIO; + } + return 0; +} + +static ssize_t show_wimax(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS)); +} + +static ssize_t store_wimax(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sysfs_acpi_set(asus, buf, count, METHOD_WIMAX); +} + +/* + * Wwan + */ +static int asus_wwan_set(struct asus_laptop *asus, int status) +{ + if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) { + pr_warning("Error setting wwan status to %d", status); + return -EIO; + } + return 0; +} + +static ssize_t show_wwan(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS)); +} + +static ssize_t store_wwan(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sysfs_acpi_set(asus, buf, count, METHOD_WWAN); +} + /* * Display */ @@ -1202,6 +1279,8 @@ static DEVICE_ATTR(infos, S_IRUGO, show_infos, NULL); static DEVICE_ATTR(wlan, S_IRUGO | S_IWUSR, show_wlan, store_wlan); static DEVICE_ATTR(bluetooth, S_IRUGO | S_IWUSR, show_bluetooth, store_bluetooth); +static DEVICE_ATTR(wimax, S_IRUGO | S_IWUSR, show_wimax, store_wimax); +static DEVICE_ATTR(wwan, S_IRUGO | S_IWUSR, show_wwan, store_wwan); static DEVICE_ATTR(display, S_IRUGO | S_IWUSR, show_disp, store_disp); static DEVICE_ATTR(ledd, S_IRUGO | S_IWUSR, show_ledd, store_ledd); static DEVICE_ATTR(ls_level, S_IRUGO | S_IWUSR, show_lslvl, store_lslvl); @@ -1212,6 +1291,8 @@ static struct attribute *asus_attributes[] = { &dev_attr_infos.attr, &dev_attr_wlan.attr, &dev_attr_bluetooth.attr, + &dev_attr_wimax.attr, + &dev_attr_wwan.attr, &dev_attr_display.attr, &dev_attr_ledd.attr, &dev_attr_ls_level.attr, @@ -1239,6 +1320,13 @@ static mode_t asus_sysfs_is_visible(struct kobject *kobj, } else if (attr == &dev_attr_display.attr) { supported = !acpi_check_handle(handle, METHOD_SWITCH_DISPLAY, NULL); + } else if (attr == &dev_attr_wimax.attr) { + supported = + !acpi_check_handle(asus->handle, METHOD_WIMAX, NULL); + + } else if (attr == &dev_attr_wwan.attr) { + supported = !acpi_check_handle(asus->handle, METHOD_WWAN, NULL); + } else if (attr == &dev_attr_ledd.attr) { supported = !acpi_check_handle(handle, METHOD_LEDD, NULL); @@ -1397,7 +1485,8 @@ static int asus_laptop_get_info(struct asus_laptop *asus) /* * The HWRS method return informations about the hardware. - * 0x80 bit is for WLAN, 0x100 for Bluetooth. + * 0x80 bit is for WLAN, 0x100 for Bluetooth, + * 0x40 for WWAN, 0x10 for WIMAX. * The significance of others is yet to be found. */ status = @@ -1440,6 +1529,12 @@ static int __devinit asus_acpi_init(struct asus_laptop *asus) if (wlan_status >= 0) asus_wlan_set(asus, !!wlan_status); + if (wimax_status >= 0) + asus_wimax_set(asus, !!wimax_status); + + if (wwan_status >= 0) + asus_wwan_set(asus, !!wwan_status); + /* Keyboard Backlight is on by default */ if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL)) asus_kled_set(asus, 1); -- cgit v1.2.3-70-g09d2 From 92f61cbc614fb422759790739cbd3e5a68c9a6fc Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Thu, 18 Nov 2010 13:00:53 +0100 Subject: msi-wmi: Add mute key support Add new MUTE key seen on Medion Akoya AIO PC P4010D using MSI motherboard (Product Name: MS-7621) Reported-and-tested-by: Mark Huijgen Signed-off-by: Anisse Astier Signed-off-by: Matthew Garrett --- drivers/platform/x86/msi-wmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c index 42a5469a245..bde607d98d6 100644 --- a/drivers/platform/x86/msi-wmi.c +++ b/drivers/platform/x86/msi-wmi.c @@ -48,11 +48,13 @@ MODULE_ALIAS("wmi:B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2"); #define MSI_WMI_BRIGHTNESSDOWN (KEYCODE_BASE + 1) #define MSI_WMI_VOLUMEUP (KEYCODE_BASE + 2) #define MSI_WMI_VOLUMEDOWN (KEYCODE_BASE + 3) +#define MSI_WMI_MUTE (KEYCODE_BASE + 4) static struct key_entry msi_wmi_keymap[] = { { KE_KEY, MSI_WMI_BRIGHTNESSUP, {KEY_BRIGHTNESSUP} }, { KE_KEY, MSI_WMI_BRIGHTNESSDOWN, {KEY_BRIGHTNESSDOWN} }, { KE_KEY, MSI_WMI_VOLUMEUP, {KEY_VOLUMEUP} }, { KE_KEY, MSI_WMI_VOLUMEDOWN, {KEY_VOLUMEDOWN} }, + { KE_KEY, MSI_WMI_MUTE, {KEY_MUTE} }, { KE_END, 0} }; static ktime_t last_pressed[ARRAY_SIZE(msi_wmi_keymap) - 1]; -- cgit v1.2.3-70-g09d2 From a80e1cd70144fe7727f2e2d838611b6b8cf8a6d5 Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Thu, 18 Nov 2010 13:00:54 +0100 Subject: msi-wmi: fix semantically incorrect use of keycode instead of scancode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I didn't know the difference between the two when I wrote this code in commit c30116c6f0d26cd6e46dfa578163d573ef4730b2. Signed-off-by: Anisse Astier Signed-off-by: Matthew Garrett --- drivers/platform/x86/msi-wmi.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c index bde607d98d6..35278ad7e62 100644 --- a/drivers/platform/x86/msi-wmi.c +++ b/drivers/platform/x86/msi-wmi.c @@ -43,12 +43,12 @@ MODULE_ALIAS("wmi:B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2"); #define dprintk(msg...) pr_debug(DRV_PFX msg) -#define KEYCODE_BASE 0xD0 -#define MSI_WMI_BRIGHTNESSUP KEYCODE_BASE -#define MSI_WMI_BRIGHTNESSDOWN (KEYCODE_BASE + 1) -#define MSI_WMI_VOLUMEUP (KEYCODE_BASE + 2) -#define MSI_WMI_VOLUMEDOWN (KEYCODE_BASE + 3) -#define MSI_WMI_MUTE (KEYCODE_BASE + 4) +#define SCANCODE_BASE 0xD0 +#define MSI_WMI_BRIGHTNESSUP SCANCODE_BASE +#define MSI_WMI_BRIGHTNESSDOWN (SCANCODE_BASE + 1) +#define MSI_WMI_VOLUMEUP (SCANCODE_BASE + 2) +#define MSI_WMI_VOLUMEDOWN (SCANCODE_BASE + 3) +#define MSI_WMI_MUTE (SCANCODE_BASE + 4) static struct key_entry msi_wmi_keymap[] = { { KE_KEY, MSI_WMI_BRIGHTNESSUP, {KEY_BRIGHTNESSUP} }, { KE_KEY, MSI_WMI_BRIGHTNESSDOWN, {KEY_BRIGHTNESSDOWN} }, @@ -171,7 +171,7 @@ static void msi_wmi_notify(u32 value, void *context) ktime_t diff; cur = ktime_get_real(); diff = ktime_sub(cur, last_pressed[key->code - - KEYCODE_BASE]); + SCANCODE_BASE]); /* Ignore event if the same event happened in a 50 ms timeframe -> Key press may result in 10-20 GPEs */ if (ktime_to_us(diff) < 1000 * 50) { @@ -180,7 +180,7 @@ static void msi_wmi_notify(u32 value, void *context) key->code, ktime_to_us(diff)); return; } - last_pressed[key->code - KEYCODE_BASE] = cur; + last_pressed[key->code - SCANCODE_BASE] = cur; if (key->type == KE_KEY && /* Brightness is served via acpi video driver */ -- cgit v1.2.3-70-g09d2 From 53c96dfdd0c0ccbba7aee84c60ce0f2aa466413f Mon Sep 17 00:00:00 2001 From: Zeng Zhaoming Date: Fri, 19 Nov 2010 00:46:19 +0800 Subject: ACPI, hp-wmi: Fix memory leak in acpi query Free acpi return memory after query. Signed-off-by: Zeng Zhaoming Signed-off-by: Matthew Garrett --- drivers/platform/x86/hp-wmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 1dac659b5e0..9e05af9c41c 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -172,6 +172,8 @@ static int hp_wmi_perform_query(int query, int write, u32 *buffer, bios_return = *((struct bios_return *)obj->buffer.pointer); memcpy(buffer, &bios_return.value, sizeof(bios_return.value)); + + kfree(obj); return 0; } -- cgit v1.2.3-70-g09d2 From 9915672d41273f5b77f1b3c29b391ffb7732b84b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 24 Nov 2010 09:15:27 -0800 Subject: af_unix: limit unix_tot_inflight Vegard Nossum found a unix socket OOM was possible, posting an exploit program. My analysis is we can eat all LOWMEM memory before unix_gc() being called from unix_release_sock(). Moreover, the thread blocked in unix_gc() can consume huge amount of time to perform cleanup because of huge working set. One way to handle this is to have a sensible limit on unix_tot_inflight, tested from wait_for_unix_gc() and to force a call to unix_gc() if this limit is hit. This solves the OOM and also reduce overall latencies, and should not slowdown normal workloads. Reported-by: Vegard Nossum Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/unix/garbage.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/unix/garbage.c b/net/unix/garbage.c index c8df6fda0b1..40df93d1cf3 100644 --- a/net/unix/garbage.c +++ b/net/unix/garbage.c @@ -259,9 +259,16 @@ static void inc_inflight_move_tail(struct unix_sock *u) } static bool gc_in_progress = false; +#define UNIX_INFLIGHT_TRIGGER_GC 16000 void wait_for_unix_gc(void) { + /* + * If number of inflight sockets is insane, + * force a garbage collect right now. + */ + if (unix_tot_inflight > UNIX_INFLIGHT_TRIGGER_GC && !gc_in_progress) + unix_gc(); wait_event(unix_gc_wait, gc_in_progress == false); } -- cgit v1.2.3-70-g09d2 From ba84cd1f2b5dd49bda9300c5a11373f7e14c3c66 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 24 Nov 2010 17:37:17 +0000 Subject: drm/i915/sdvo: Always add a 30ms delay to make SDVO TV detection reliable Commit d09c23de intended to add a 30ms delay to give the ADD time to detect any TVs connected. However, it used the sdvo->is_tv flag to do so which is dependent upon the previous detection result and not whether the output supports TVs. Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/intel_sdvo.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index bf643100dec..d97e6cb52d3 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1377,10 +1377,12 @@ intel_sdvo_detect(struct drm_connector *connector, bool force) if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0)) return connector_status_unknown; - if (intel_sdvo->is_tv) { - /* add 30ms delay when the output type is SDVO-TV */ + + /* add 30ms delay when the output type might be TV */ + if (intel_sdvo->caps.output_flags & + (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_CVBS0)) mdelay(30); - } + if (!intel_sdvo_read_response(intel_sdvo, &response, 2)) return connector_status_unknown; -- cgit v1.2.3-70-g09d2 From 4448008eb12f4b6bb9993584de8ec1d20b708d6f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 24 Nov 2010 11:19:05 -0800 Subject: isdn: icn: Fix stack corruption bug. Running randconfig with ktest.pl I hit this bug: [ 16.101158] ICN-ISDN-driver Rev 1.65.6.8 mem=0x000d0000 [ 16.106376] icn: (line0) ICN-2B, port 0x320 added [ 16.111064] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c1642880 [ 16.111066] [ 16.121214] Pid: 1, comm: swapper Not tainted 2.6.37-rc2-test-00124-g6656b3f #8 [ 16.128499] Call Trace: [ 16.130942] [] ? printk+0x1d/0x23 [ 16.135200] [] panic+0x5c/0x162 [ 16.139286] [] ? icn_addcard+0x6d/0xbe [ 16.143975] [] print_tainted+0x0/0x8c [ 16.148582] [] ? icn_init+0xd8/0xdf [ 16.153012] [] icn_init+0xd8/0xdf [ 16.157271] [] do_one_initcall+0x8c/0x143 [ 16.162222] [] ? icn_init+0x0/0xdf [ 16.166566] [] kernel_init+0x13f/0x1da [ 16.171256] [] ? kernel_init+0x0/0x1da [ 16.175945] [] kernel_thread_helper+0x6/0x10 [ 16.181181] panic occurred, switching back to text console Looking into it I found that the stack was corrupted by the assignment of the Rev #. The variable rev is given 10 bytes, and in this output the characters that were copied was: " 1.65.6.8 $". Which was 11 characters plus the null ending character for a total of 12 bytes, thus corrupting the stack. This patch ups the variable size to 20 bytes as well as changes the strcpy to strncpy. I also added a check to make sure '$' is found. Signed-off-by: Steven Rostedt Signed-off-by: David S. Miller --- drivers/isdn/icn/icn.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/isdn/icn/icn.c b/drivers/isdn/icn/icn.c index 2e847a90bad..f2b5bab5e6a 100644 --- a/drivers/isdn/icn/icn.c +++ b/drivers/isdn/icn/icn.c @@ -1627,7 +1627,7 @@ __setup("icn=", icn_setup); static int __init icn_init(void) { char *p; - char rev[10]; + char rev[20]; memset(&dev, 0, sizeof(icn_dev)); dev.memaddr = (membase & 0x0ffc000); @@ -1637,9 +1637,10 @@ static int __init icn_init(void) spin_lock_init(&dev.devlock); if ((p = strchr(revision, ':'))) { - strcpy(rev, p + 1); + strncpy(rev, p + 1, 20); p = strchr(rev, '$'); - *p = 0; + if (p) + *p = 0; } else strcpy(rev, " ??? "); printk(KERN_NOTICE "ICN-ISDN-driver Rev%smem=0x%08lx\n", rev, -- cgit v1.2.3-70-g09d2 From c39508d6f118308355468314ff414644115a07f3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 24 Nov 2010 11:47:22 -0800 Subject: tcp: Make TCP_MAXSEG minimum more correct. Use TCP_MIN_MSS instead of constant 64. Reported-by: Min Zhang Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 08141996948..f15c36a706e 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2246,7 +2246,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level, /* Values greater than interface MTU won't take effect. However * at the point when this call is done we typically don't yet * know which interface is going to be used */ - if (val < 64 || val > MAX_TCP_WINDOW) { + if (val < TCP_MIN_MSS || val > MAX_TCP_WINDOW) { err = -EINVAL; break; } -- cgit v1.2.3-70-g09d2 From fa0e846494792e722d817b9d3d625a4ef4896c96 Mon Sep 17 00:00:00 2001 From: Phil Blundell Date: Wed, 24 Nov 2010 11:49:19 -0800 Subject: econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849 Later parts of econet_sendmsg() rely on saddr != NULL, so return early with EINVAL if NULL was passed otherwise an oops may occur. Signed-off-by: Phil Blundell Signed-off-by: David S. Miller --- net/econet/af_econet.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c index f8c1ae4b41f..e366f1bef91 100644 --- a/net/econet/af_econet.c +++ b/net/econet/af_econet.c @@ -297,23 +297,14 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock, mutex_lock(&econet_mutex); - if (saddr == NULL) { - struct econet_sock *eo = ec_sk(sk); - - addr.station = eo->station; - addr.net = eo->net; - port = eo->port; - cb = eo->cb; - } else { - if (msg->msg_namelen < sizeof(struct sockaddr_ec)) { - mutex_unlock(&econet_mutex); - return -EINVAL; - } - addr.station = saddr->addr.station; - addr.net = saddr->addr.net; - port = saddr->port; - cb = saddr->cb; - } + if (saddr == NULL || msg->msg_namelen < sizeof(struct sockaddr_ec)) { + mutex_unlock(&econet_mutex); + return -EINVAL; + } + addr.station = saddr->addr.station; + addr.net = saddr->addr.net; + port = saddr->port; + cb = saddr->cb; /* Look for a device with the right network number. */ dev = net2dev_map[addr.net]; @@ -351,7 +342,6 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock, eb = (struct ec_cb *)&skb->cb; - /* BUG: saddr may be NULL */ eb->cookie = saddr->cookie; eb->sec = *saddr; eb->sent = ec_tx_done; -- cgit v1.2.3-70-g09d2 From 16c41745c7b92a243d0874f534c1655196c64b74 Mon Sep 17 00:00:00 2001 From: Phil Blundell Date: Wed, 24 Nov 2010 11:49:53 -0800 Subject: econet: fix CVE-2010-3850 Add missing check for capable(CAP_NET_ADMIN) in SIOCSIFADDR operation. Signed-off-by: Phil Blundell Signed-off-by: David S. Miller --- net/econet/af_econet.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c index e366f1bef91..d41ba8e56c1 100644 --- a/net/econet/af_econet.c +++ b/net/econet/af_econet.c @@ -661,6 +661,9 @@ static int ec_dev_ioctl(struct socket *sock, unsigned int cmd, void __user *arg) err = 0; switch (cmd) { case SIOCSIFADDR: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + edev = dev->ec_ptr; if (edev == NULL) { /* Magic up a new one. */ -- cgit v1.2.3-70-g09d2 From a27e13d370415add3487949c60810e36069a23a6 Mon Sep 17 00:00:00 2001 From: Phil Blundell Date: Wed, 24 Nov 2010 11:51:47 -0800 Subject: econet: fix CVE-2010-3848 Don't declare variable sized array of iovecs on the stack since this could cause stack overflow if msg->msgiovlen is large. Instead, coalesce the user-supplied data into a new buffer and use a single iovec for it. Signed-off-by: Phil Blundell Signed-off-by: David S. Miller --- net/econet/af_econet.c | 62 +++++++++++++++++++++++++------------------------- 1 file changed, 31 insertions(+), 31 deletions(-) diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c index d41ba8e56c1..13992e1d272 100644 --- a/net/econet/af_econet.c +++ b/net/econet/af_econet.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -276,12 +277,12 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock, #endif #ifdef CONFIG_ECONET_AUNUDP struct msghdr udpmsg; - struct iovec iov[msg->msg_iovlen+1]; + struct iovec iov[2]; struct aunhdr ah; struct sockaddr_in udpdest; __kernel_size_t size; - int i; mm_segment_t oldfs; + char *userbuf; #endif /* @@ -319,17 +320,17 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock, } } - if (len + 15 > dev->mtu) { - mutex_unlock(&econet_mutex); - return -EMSGSIZE; - } - if (dev->type == ARPHRD_ECONET) { /* Real hardware Econet. We're not worthy etc. */ #ifdef CONFIG_ECONET_NATIVE unsigned short proto = 0; int res; + if (len + 15 > dev->mtu) { + mutex_unlock(&econet_mutex); + return -EMSGSIZE; + } + dev_hold(dev); skb = sock_alloc_send_skb(sk, len+LL_ALLOCATED_SPACE(dev), @@ -405,6 +406,11 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock, return -ENETDOWN; /* No socket - can't send */ } + if (len > 32768) { + err = -E2BIG; + goto error; + } + /* Make up a UDP datagram and hand it off to some higher intellect. */ memset(&udpdest, 0, sizeof(udpdest)); @@ -436,36 +442,26 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock, /* tack our header on the front of the iovec */ size = sizeof(struct aunhdr); - /* - * XXX: that is b0rken. We can't mix userland and kernel pointers - * in iovec, since on a lot of platforms copy_from_user() will - * *not* work with the kernel and userland ones at the same time, - * regardless of what we do with set_fs(). And we are talking about - * econet-over-ethernet here, so "it's only ARM anyway" doesn't - * apply. Any suggestions on fixing that code? -- AV - */ iov[0].iov_base = (void *)&ah; iov[0].iov_len = size; - for (i = 0; i < msg->msg_iovlen; i++) { - void __user *base = msg->msg_iov[i].iov_base; - size_t iov_len = msg->msg_iov[i].iov_len; - /* Check it now since we switch to KERNEL_DS later. */ - if (!access_ok(VERIFY_READ, base, iov_len)) { - mutex_unlock(&econet_mutex); - return -EFAULT; - } - iov[i+1].iov_base = base; - iov[i+1].iov_len = iov_len; - size += iov_len; + + userbuf = vmalloc(len); + if (userbuf == NULL) { + err = -ENOMEM; + goto error; } + iov[1].iov_base = userbuf; + iov[1].iov_len = len; + err = memcpy_fromiovec(userbuf, msg->msg_iov, len); + if (err) + goto error_free_buf; + /* Get a skbuff (no data, just holds our cb information) */ if ((skb = sock_alloc_send_skb(sk, 0, msg->msg_flags & MSG_DONTWAIT, - &err)) == NULL) { - mutex_unlock(&econet_mutex); - return err; - } + &err)) == NULL) + goto error_free_buf; eb = (struct ec_cb *)&skb->cb; @@ -481,7 +477,7 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock, udpmsg.msg_name = (void *)&udpdest; udpmsg.msg_namelen = sizeof(udpdest); udpmsg.msg_iov = &iov[0]; - udpmsg.msg_iovlen = msg->msg_iovlen + 1; + udpmsg.msg_iovlen = 2; udpmsg.msg_control = NULL; udpmsg.msg_controllen = 0; udpmsg.msg_flags=0; @@ -489,9 +485,13 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock, oldfs = get_fs(); set_fs(KERNEL_DS); /* More privs :-) */ err = sock_sendmsg(udpsock, &udpmsg, size); set_fs(oldfs); + +error_free_buf: + vfree(userbuf); #else err = -EPROTOTYPE; #endif + error: mutex_unlock(&econet_mutex); return err; -- cgit v1.2.3-70-g09d2 From f910043ce00791c06afc3789278447c4e88670ea Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 24 Nov 2010 11:09:03 -0800 Subject: OMAP: UART: don't resume UARTs that are not enabled. Add additional check to omap_uart_resume_idle() so that only enabled (specifically, idle-enabled) UARTs are allowed to resume. This matches the existing check in prepare idle. Without this patch, the system will hang if a board is configured to register only some uarts instead of all of them and PM is enabled. Cc: Govindraj R. Signed-off-by: Kevin Hilman [tony@atomide.com: updated description] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index becf0e38ef7..bc934dbe3bf 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -406,7 +406,7 @@ void omap_uart_resume_idle(int num) struct omap_uart_state *uart; list_for_each_entry(uart, &uart_list, node) { - if (num == uart->num) { + if (num == uart->num && uart->can_sleep) { omap_uart_enable_clocks(uart); /* Check for IO pad wakeup */ -- cgit v1.2.3-70-g09d2 From 0d8e2d0dad98a693bad88aea6876ac8b94ad95c6 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 24 Nov 2010 16:49:05 -0700 Subject: OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled The console semaphore must be held while the OMAP UART devices are disabled, lest a console write cause an ARM abort (and a kernel crash) when the underlying console device is inaccessible. These crashes only occur when the console is on one of the OMAP internal serial ports. While this problem has been latent in the PM idle loop for some time, the crash was not triggerable with an unmodified kernel until commit 6f251e9db1093c187addc309b5f2f7fe3efd2995 ("OMAP: UART: omap_device conversions, remove implicit 8520 assumptions"). After this patch, a console write often occurs after the console UART has been disabled in the idle loop, crashing the system. Several users have encountered this bug: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg38396.html http://www.mail-archive.com/linux-omap@vger.kernel.org/msg36602.html The same commit also introduced new code that disabled the UARTs during init, in omap_serial_init_port(). The kernel will also crash in this code when earlyconsole and extra debugging is enabled: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg36411.html The minimal fix for the -rc series is to hold the console semaphore while the OMAP UARTs are disabled. This is a somewhat overbroad fix, since the console may not be located on an OMAP UART, as is the case with the GPMC UART on Zoom3. While it is technically possible to determine which devices the console or earlyconsole is actually running on, it is not a trivial problem to solve, and the code to do so is not really appropriate for the -rc series. The right long-term fix is to ensure that no code outside of the OMAP serial driver can disable an OMAP UART. As I understand it, code to implement this is under development by TI. This patch is a collaboration between Paul Walmsley and Tony Lindgren . Thanks to Ming Lei and Pramod for their feedback on earlier versions of this patch. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Acked-by: Kevin Hilman Cc: Ming Lei Cc: Pramod Cc: Thomas Petazzoni Cc: Jean Pihet Cc: Govindraj.R --- arch/arm/mach-omap2/pm24xx.c | 7 +++++++ arch/arm/mach-omap2/pm34xx.c | 10 ++++++++++ arch/arm/mach-omap2/serial.c | 5 +++++ 3 files changed, 22 insertions(+) diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index a40457d8192..c85923e56b8 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -118,6 +119,10 @@ static void omap2_enter_full_retention(void) if (omap_irq_pending()) goto no_sleep; + /* Block console output in case it is on one of the OMAP UARTs */ + if (try_acquire_console_sem()) + goto no_sleep; + omap_uart_prepare_idle(0); omap_uart_prepare_idle(1); omap_uart_prepare_idle(2); @@ -131,6 +136,8 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(1); omap_uart_resume_idle(0); + release_console_sem(); + no_sleep: if (omap2_pm_debug) { unsigned long long tmp; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 75c0cd13ad8..0ec8a04b747 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -385,6 +386,12 @@ void omap_sram_idle(void) omap3_enable_io_chain(); } + /* Block console output in case it is on one of the OMAP UARTs */ + if (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON) + if (try_acquire_console_sem()) + goto console_still_active; + /* PER */ if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); @@ -463,6 +470,9 @@ void omap_sram_idle(void) omap_uart_resume_idle(3); } + release_console_sem(); + +console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ if (omap3_has_io_wakeup() && (per_next_state < PWRDM_POWER_ON || diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index bc934dbe3bf..d17960a1be2 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -27,6 +27,7 @@ #include #include #include +#include #ifdef CONFIG_SERIAL_OMAP #include @@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port) oh->dev_attr = uart; + acquire_console_sem(); /* in case the earlycon is on the UART */ + /* * Because of early UART probing, UART did not get idled * on init. Now that omap_device is ready, ensure full idle @@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port) omap_uart_block_sleep(uart); uart->timeout = DEFAULT_TIMEOUT; + release_console_sem(); + if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { device_init_wakeup(&od->pdev.dev, true); -- cgit v1.2.3-70-g09d2 From e5843341e3ad8ff00332376cd0745026e4b5d45f Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 24 Nov 2010 09:48:10 +0000 Subject: dma: shdma: add a MODULE_ALIAS() to allow module autoloading Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- drivers/dma/shdma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index eb6b54dbb80..85ffd5e38c5 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -1213,3 +1213,4 @@ module_exit(sh_dmae_exit); MODULE_AUTHOR("Nobuhiro Iwamatsu "); MODULE_DESCRIPTION("Renesas SH DMA Engine driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sh-dma-engine"); -- cgit v1.2.3-70-g09d2 From 11cd1a8b8cad1acfc140d9acce93762a9c140b20 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 14 Nov 2010 17:31:52 +0200 Subject: vhost/net: fix rcu check usage Incorrect rcu check was used as rcu isn't done under mutex here. Force check to 1 for now, to stop it from complaining. Signed-off-by: Michael S. Tsirkin --- drivers/vhost/net.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 4b4da5b86ff..f442668a1e5 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -129,8 +129,9 @@ static void handle_tx(struct vhost_net *net) size_t hdr_size; struct socket *sock; - sock = rcu_dereference_check(vq->private_data, - lockdep_is_held(&vq->mutex)); + /* TODO: check that we are running from vhost_worker? + * Not sure it's worth it, it's straight-forward enough. */ + sock = rcu_dereference_check(vq->private_data, 1); if (!sock) return; -- cgit v1.2.3-70-g09d2 From 5989f11ba11c72f98d57580b991418d9ff6a207d Mon Sep 17 00:00:00 2001 From: Raoul Bhatia Date: Thu, 25 Nov 2010 17:32:47 +0100 Subject: EDAC: Fix typos in Documentation/edac.txt Fix trivial typos in edac.txt Signed-off-by: Raoul Bhatia Signed-off-by: Borislav Petkov --- Documentation/edac.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 0b875e8da96..9ee774de57c 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -196,7 +196,7 @@ csrow3. The representation of the above is reflected in the directory tree in EDAC's sysfs interface. Starting in directory /sys/devices/system/edac/mc each memory controller will be represented -by its own 'mcX' directory, where 'X" is the index of the MC. +by its own 'mcX' directory, where 'X' is the index of the MC. ..../edac/mc/ @@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC. .... Under each 'mcX' directory each 'csrowX' is again represented by a -'csrowX', where 'X" is the csrow index: +'csrowX', where 'X' is the csrow index: .../mc/mc0/ @@ -232,7 +232,7 @@ EDAC control and attribute files. In 'mcX' directories are EDAC control and attribute files for -this 'X" instance of the memory controllers: +this 'X' instance of the memory controllers: Counter reset control file: @@ -343,7 +343,7 @@ Sdram memory scrubbing rate: 'csrowX' DIRECTORIES In the 'csrowX' directories are EDAC control and attribute files for -this 'X" instance of csrow: +this 'X' instance of csrow: Total Uncorrectable Errors count attribute file: -- cgit v1.2.3-70-g09d2 From a235e4c9302509ac5956bbbffa22eb5ed9fcdc54 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 24 Nov 2010 22:26:55 -0500 Subject: Revert "drm/radeon/kms: fix typo in r600 cs checker" This reverts commit d33ef52d9db8a36900dd53f2e32db9a521ace259. This change seems to expose a bug in the 3D driver tiggered by certain apps, so revert it to keep userspace working. Reported-by: Rafael J. Wysocki Cc: Rafael J. Wysocki Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 9bebac1ec00..0f90fc3482c 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -315,7 +315,7 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) if (array_mode == V_0280A0_ARRAY_LINEAR_GENERAL) { /* the initial DDX does bad things with the CB size occasionally */ /* it rounds up height too far for slice tile max but the BO is smaller */ - tmp = (height - 7) * pitch * bpe; + tmp = (height - 7) * 8 * bpe; if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) { dev_warn(p->dev, "%s offset[%d] %d %d %lu too big\n", __func__, i, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i])); return -EINVAL; -- cgit v1.2.3-70-g09d2 From 22a95949d03548cb346d81d71ce6c64dc273f421 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 26 Nov 2010 05:20:25 +0000 Subject: framebuffer: fix fbcmap.c kernel-doc warning Fix kernel-doc warning in fbcmap.c: Warning(drivers/video/fbcmap.c:92): No description found for parameter 'flags' Signed-off-by: Randy Dunlap Signed-off-by: Paul Mundt --- drivers/video/fbcmap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c index affdf3e32cf..5c3960da755 100644 --- a/drivers/video/fbcmap.c +++ b/drivers/video/fbcmap.c @@ -80,6 +80,7 @@ static const struct fb_cmap default_16_colors = { * @cmap: frame buffer colormap structure * @len: length of @cmap * @transp: boolean, 1 if there is transparency, 0 otherwise + * @flags: flags for kmalloc memory allocation * * Allocates memory for a colormap @cmap. @len is the * number of entries in the palette. -- cgit v1.2.3-70-g09d2 From e5cba24e3f018d4beb6acd101a82483c98f91ce7 Mon Sep 17 00:00:00 2001 From: Hitoshi Mitake Date: Fri, 26 Nov 2010 12:06:44 +0100 Subject: workqueue: check the allocation of system_unbound_wq I found a trivial bug on initialization of workqueue. Current init_workqueues doesn't check the result of allocation of system_unbound_wq, this should be checked like other queues. Signed-off-by: Hitoshi Mitake Cc: Arjan van de Ven Cc: David Howells Signed-off-by: Tejun Heo --- kernel/workqueue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 90db1bd1a97..ca017ce8bc6 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -3692,7 +3692,8 @@ static int __init init_workqueues(void) system_nrt_wq = alloc_workqueue("events_nrt", WQ_NON_REENTRANT, 0); system_unbound_wq = alloc_workqueue("events_unbound", WQ_UNBOUND, WQ_UNBOUND_MAX_ACTIVE); - BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq); + BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq || + !system_unbound_wq); return 0; } early_initcall(init_workqueues); -- cgit v1.2.3-70-g09d2 From 49f4138346b3cec2706adff02658fe27ceb1e46f Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 26 Nov 2010 13:42:47 +0100 Subject: printk: Fix wake_up_klogd() vs cpu hotplug wake_up_klogd() may get called from preemptible context but uses __raw_get_cpu_var() to write to a per cpu variable. If it gets preempted between getting the address and writing to it, the cpu in question could be offline if the process gets scheduled back and hence writes to the per cpu data of an offline cpu. This buggy behaviour was introduced with fa33507a "printk: robustify printk, fix #2" which was supposed to fix a "using smp_processor_id() in preemptible" warning. Let's use this_cpu_write() instead which disables preemption and makes sure that the outlined scenario cannot happen. Signed-off-by: Heiko Carstens Acked-by: Eric Dumazet Signed-off-by: Peter Zijlstra LKML-Reference: <20101126124247.GC7023@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar --- kernel/printk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/printk.c b/kernel/printk.c index 9a2264fc42c..cf7588e93f6 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1088,7 +1088,7 @@ int printk_needs_cpu(int cpu) void wake_up_klogd(void) { if (waitqueue_active(&log_wait)) - __raw_get_cpu_var(printk_pending) = 1; + this_cpu_write(printk_pending, 1); } /** -- cgit v1.2.3-70-g09d2 From 61ab25447ad6334a74e32f60efb135a3467223f8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 26 Nov 2010 13:00:59 +0100 Subject: nohz: Fix printk_needs_cpu() return value on offline cpus This patch fixes a hang observed with 2.6.32 kernels where timers got enqueued on offline cpus. printk_needs_cpu() may return 1 if called on offline cpus. When a cpu gets offlined it schedules the idle process which, before killing its own cpu, will call tick_nohz_stop_sched_tick(). That function in turn will call printk_needs_cpu() in order to check if the local tick can be disabled. On offline cpus this function should naturally return 0 since regardless if the tick gets disabled or not the cpu will be dead short after. That is besides the fact that __cpu_disable() should already have made sure that no interrupts on the offlined cpu will be delivered anyway. In this case it prevents tick_nohz_stop_sched_tick() to call select_nohz_load_balancer(). No idea if that really is a problem. However what made me debug this is that on 2.6.32 the function get_nohz_load_balancer() is used within __mod_timer() to select a cpu on which a timer gets enqueued. If printk_needs_cpu() returns 1 then the nohz_load_balancer cpu doesn't get updated when a cpu gets offlined. It may contain the cpu number of an offline cpu. In turn timers get enqueued on an offline cpu and not very surprisingly they never expire and cause system hangs. This has been observed 2.6.32 kernels. On current kernels __mod_timer() uses get_nohz_timer_target() which doesn't have that problem. However there might be other problems because of the too early exit tick_nohz_stop_sched_tick() in case a cpu goes offline. Easiest way to fix this is just to test if the current cpu is offline and call printk_tick() directly which clears the condition. Alternatively I tried a cpu hotplug notifier which would clear the condition, however between calling the notifier function and printk_needs_cpu() something could have called printk() again and the problem is back again. This seems to be the safest fix. Signed-off-by: Heiko Carstens Signed-off-by: Peter Zijlstra Cc: stable@kernel.org LKML-Reference: <20101126120235.406766476@de.ibm.com> Signed-off-by: Ingo Molnar --- kernel/printk.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/printk.c b/kernel/printk.c index cf7588e93f6..a23315dc449 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1082,6 +1082,8 @@ void printk_tick(void) int printk_needs_cpu(int cpu) { + if (unlikely(cpu_is_offline(cpu))) + printk_tick(); return per_cpu(printk_pending, cpu); } -- cgit v1.2.3-70-g09d2 From 55a61d1d06a3dc443d0db8aaa613365dcb83b98a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 22 Nov 2010 18:50:32 +0000 Subject: Btrfs: fix typo in fallocate to make it honor actual size There is a typo in __btrfs_prealloc_file_range() where we set the i_size to actual_len/cur_offset, and then just set it to cur_offset again, and do the same with btrfs_ordered_update_i_size(). This fixes it back to keeping i_size in a local variable and then updating i_size properly. Tested this with xfs_io -F -f -c "falloc 0 1" -c "pwrite 0 1" foo stat'ing foo gives us a size of 1 instead of 4096 like it was. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 37cc1776a5d..0058fb3c256 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7002,6 +7002,7 @@ static int __btrfs_prealloc_file_range(struct inode *inode, int mode, struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_key ins; u64 cur_offset = start; + u64 i_size; int ret = 0; bool own_trans = true; @@ -7043,11 +7044,11 @@ static int __btrfs_prealloc_file_range(struct inode *inode, int mode, (actual_len > inode->i_size) && (cur_offset > inode->i_size)) { if (cur_offset > actual_len) - i_size_write(inode, actual_len); + i_size = actual_len; else - i_size_write(inode, cur_offset); - i_size_write(inode, cur_offset); - btrfs_ordered_update_i_size(inode, cur_offset, NULL); + i_size = cur_offset; + i_size_write(inode, i_size); + btrfs_ordered_update_i_size(inode, i_size, NULL); } ret = btrfs_update_inode(trans, root, inode); -- cgit v1.2.3-70-g09d2 From 0ed42a63f3edb144b091d9528401fce95c3c4d8d Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 22 Nov 2010 18:55:39 +0000 Subject: Btrfs: make sure new inode size is ok in fallocate We have been failing xfstest 228 forever, because we don't check to make sure the new inode size is acceptable as far as RLIMIT is concerned. Just check to make sure it's ok to create a inode with this new size and error out if not. With this patch we now pass 228. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 0058fb3c256..0eeacd93e8e 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7102,6 +7102,10 @@ static long btrfs_fallocate(struct inode *inode, int mode, btrfs_wait_ordered_range(inode, alloc_start, alloc_end - alloc_start); mutex_lock(&inode->i_mutex); + ret = inode_newsize_ok(inode, alloc_end); + if (ret) + goto out; + if (alloc_start > inode->i_size) { ret = btrfs_cont_expand(inode, alloc_start); if (ret) -- cgit v1.2.3-70-g09d2 From bc1cbf1f86aa2501efa9ca637c736fce6bcc4b1d Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 23 Nov 2010 19:50:59 +0000 Subject: Btrfs: update inode ctime when using links Currently we fail xfstest 236 because we're not updating the inode ctime on link. This is a simple fix, and makes it so we pass 236 now. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 0eeacd93e8e..6df921f218f 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4785,6 +4785,7 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir, return -EPERM; btrfs_inc_nlink(inode); + inode->i_ctime = CURRENT_TIME; err = btrfs_set_inode_index(dir, &index); if (err) -- cgit v1.2.3-70-g09d2 From 619c8c763928841b1112e1d417f88bc1d44daecb Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Mon, 22 Nov 2010 02:21:38 +0000 Subject: Btrfs - fix race between btrfs_get_sb() and umount When mounting a btrfs file system btrfs_test_super() may attempt to use sb->s_fs_info, the btrfs root, of a super block that is going away and that has had the btrfs root set to NULL in its ->put_super(). But if the super block is going away it cannot be an existing super block so we can return false in this case. Signed-off-by: Ian Kent Signed-off-by: Chris Mason --- fs/btrfs/super.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 66e4612a791..141fb317d3b 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -566,6 +566,12 @@ static int btrfs_test_super(struct super_block *s, void *data) struct btrfs_fs_devices *test_fs_devices = data; struct btrfs_root *root = btrfs_sb(s); + /* + * If this super block is going away, return false as it + * can't match as an existing super block. + */ + if (!atomic_read(&s->s_active)) + return 0; return root->fs_info->fs_devices == test_fs_devices; } -- cgit v1.2.3-70-g09d2 From 975f84fee2e8a77ee5f41bfe7c5682bf29366b10 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 23 Nov 2010 19:36:57 +0000 Subject: Btrfs: fix fiemap There are two big problems currently with FIEMAP 1) We return extents for holes. This isn't supposed to happen, we just don't return extents for holes and then userspace interprets the lack of an extent as a hole. 2) We sometimes don't set FIEMAP_EXTENT_LAST properly. This is because we wait to see a EXTENT_FLAG_VACANCY flag on the em, but this won't happen if say we ask fiemap to map up to the last extent in a file, and there is nothing but holes up to the i_size. To fix this we need to lookup the last extent in this file and save the logical offset, so if we happen to try and map that extent we can be sure to set FIEMAP_EXTENT_LAST. With this patch we now pass xfstest 225, which we never have before. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 63 ++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 54 insertions(+), 9 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 143d3f541d6..5e7a94d7da8 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2901,21 +2901,53 @@ out: int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, __u64 start, __u64 len, get_extent_t *get_extent) { - int ret; + int ret = 0; u64 off = start; u64 max = start + len; u32 flags = 0; + u32 found_type; + u64 last; u64 disko = 0; + struct btrfs_key found_key; struct extent_map *em = NULL; struct extent_state *cached_state = NULL; + struct btrfs_path *path; + struct btrfs_file_extent_item *item; int end = 0; u64 em_start = 0, em_len = 0; unsigned long emflags; - ret = 0; + int hole = 0; if (len == 0) return -EINVAL; + path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; + path->leave_spinning = 1; + + ret = btrfs_lookup_file_extent(NULL, BTRFS_I(inode)->root, + path, inode->i_ino, -1, 0); + if (ret < 0) { + btrfs_free_path(path); + return ret; + } + WARN_ON(!ret); + path->slots[0]--; + item = btrfs_item_ptr(path->nodes[0], path->slots[0], + struct btrfs_file_extent_item); + btrfs_item_key_to_cpu(path->nodes[0], &found_key, path->slots[0]); + found_type = btrfs_key_type(&found_key); + + /* No extents, just return */ + if (found_key.objectid != inode->i_ino || + found_type != BTRFS_EXTENT_DATA_KEY) { + btrfs_free_path(path); + return 0; + } + last = found_key.offset; + btrfs_free_path(path); + lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0, &cached_state, GFP_NOFS); em = get_extent(inode, NULL, 0, off, max - off, 0); @@ -2925,11 +2957,18 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, ret = PTR_ERR(em); goto out; } + while (!end) { + hole = 0; off = em->start + em->len; if (off >= max) end = 1; + if (em->block_start == EXTENT_MAP_HOLE) { + hole = 1; + goto next; + } + em_start = em->start; em_len = em->len; @@ -2939,8 +2978,6 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, if (em->block_start == EXTENT_MAP_LAST_BYTE) { end = 1; flags |= FIEMAP_EXTENT_LAST; - } else if (em->block_start == EXTENT_MAP_HOLE) { - flags |= FIEMAP_EXTENT_UNWRITTEN; } else if (em->block_start == EXTENT_MAP_INLINE) { flags |= (FIEMAP_EXTENT_DATA_INLINE | FIEMAP_EXTENT_NOT_ALIGNED); @@ -2953,10 +2990,10 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) flags |= FIEMAP_EXTENT_ENCODED; +next: emflags = em->flags; free_extent_map(em); em = NULL; - if (!end) { em = get_extent(inode, NULL, 0, off, max - off, 0); if (!em) @@ -2967,15 +3004,23 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, } emflags = em->flags; } + if (test_bit(EXTENT_FLAG_VACANCY, &emflags)) { flags |= FIEMAP_EXTENT_LAST; end = 1; } - ret = fiemap_fill_next_extent(fieinfo, em_start, disko, - em_len, flags); - if (ret) - goto out_free; + if (em_start == last) { + flags |= FIEMAP_EXTENT_LAST; + end = 1; + } + + if (!hole) { + ret = fiemap_fill_next_extent(fieinfo, em_start, disko, + em_len, flags); + if (ret) + goto out_free; + } } out_free: free_extent_map(em); -- cgit v1.2.3-70-g09d2 From 450ba0ea06b6ed3612d27f2b7127a9de4160f285 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 19 Nov 2010 14:59:15 -0500 Subject: Btrfs: setup blank root and fs_info for mount time There is a problem with how we use sget, it searches through the list of supers attached to the fs_type looking for a super with the same fs_devices as what we're trying to mount. This depends on sb->s_fs_info being filled, but we don't fill that in until we get to btrfs_fill_super, so we could hit supers on the fs_type super list that have a null s_fs_info. In order to fix that we need to go ahead and setup a blank root with a blank fs_info to hold fs_devices, that way our test will work out right and then we can set s_fs_info in btrfs_set_super, and then open_ctree will simply use our pre-allocated root and fs_info when setting everything up. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 6 ++---- fs/btrfs/super.c | 34 +++++++++++++++++++++++++++++++--- 2 files changed, 33 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index a67b98d58c2..57c9d8eeb7d 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1561,10 +1561,8 @@ struct btrfs_root *open_ctree(struct super_block *sb, GFP_NOFS); struct btrfs_root *csum_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS); - struct btrfs_root *tree_root = kzalloc(sizeof(struct btrfs_root), - GFP_NOFS); - struct btrfs_fs_info *fs_info = kzalloc(sizeof(*fs_info), - GFP_NOFS); + struct btrfs_root *tree_root = btrfs_sb(sb); + struct btrfs_fs_info *fs_info = tree_root->fs_info; struct btrfs_root *chunk_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS); struct btrfs_root *dev_root = kzalloc(sizeof(struct btrfs_root), diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 141fb317d3b..47bf67cbe6b 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -563,7 +563,7 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs) static int btrfs_test_super(struct super_block *s, void *data) { - struct btrfs_fs_devices *test_fs_devices = data; + struct btrfs_root *test_root = data; struct btrfs_root *root = btrfs_sb(s); /* @@ -572,9 +572,17 @@ static int btrfs_test_super(struct super_block *s, void *data) */ if (!atomic_read(&s->s_active)) return 0; - return root->fs_info->fs_devices == test_fs_devices; + return root->fs_info->fs_devices == test_root->fs_info->fs_devices; } +static int btrfs_set_super(struct super_block *s, void *data) +{ + s->s_fs_info = data; + + return set_anon_super(s, data); +} + + /* * Find a superblock for the given device / mount point. * @@ -588,6 +596,8 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags, struct super_block *s; struct dentry *root; struct btrfs_fs_devices *fs_devices = NULL; + struct btrfs_root *tree_root = NULL; + struct btrfs_fs_info *fs_info = NULL; fmode_t mode = FMODE_READ; char *subvol_name = NULL; u64 subvol_objectid = 0; @@ -615,8 +625,24 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags, goto error_close_devices; } + /* + * Setup a dummy root and fs_info for test/set super. This is because + * we don't actually fill this stuff out until open_ctree, but we need + * it for searching for existing supers, so this lets us do that and + * then open_ctree will properly initialize everything later. + */ + fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS); + tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS); + if (!fs_info || !tree_root) { + error = -ENOMEM; + goto error_close_devices; + } + fs_info->tree_root = tree_root; + fs_info->fs_devices = fs_devices; + tree_root->fs_info = fs_info; + bdev = fs_devices->latest_bdev; - s = sget(fs_type, btrfs_test_super, set_anon_super, fs_devices); + s = sget(fs_type, btrfs_test_super, btrfs_set_super, tree_root); if (IS_ERR(s)) goto error_s; @@ -685,6 +711,8 @@ error_s: error = PTR_ERR(s); error_close_devices: btrfs_close_devices(fs_devices); + kfree(fs_info); + kfree(tree_root); error_free_subvol_name: kfree(subvol_name); return error; -- cgit v1.2.3-70-g09d2 From c13f7e1a94007c4381814e7daf033e3e8f0663f3 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Fri, 29 Oct 2010 23:32:01 +0200 Subject: drbd: don't recvmsg with zero length This should fix a performance degradation we observed recently. If we don't expect any subheader, we should not call into the tcp stack, as that may add considerable latency if there is no data available at this point. For a synthetic synchronous write load with single outstanding writes, this additional latency when processing the "unplug remote" packet added up to a performance degradation factor >= 10. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_receiver.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 89d8a7cc405..24487d4fb20 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -3627,17 +3627,19 @@ static void drbdd(struct drbd_conf *mdev) } shs = drbd_cmd_handler[cmd].pkt_size - sizeof(union p_header); - rv = drbd_recv(mdev, &header->h80.payload, shs); - if (unlikely(rv != shs)) { - dev_err(DEV, "short read while reading sub header: rv=%d\n", rv); - goto err_out; - } - if (packet_size - shs > 0 && !drbd_cmd_handler[cmd].expect_payload) { dev_err(DEV, "No payload expected %s l:%d\n", cmdname(cmd), packet_size); goto err_out; } + if (shs) { + rv = drbd_recv(mdev, &header->h80.payload, shs); + if (unlikely(rv != shs)) { + dev_err(DEV, "short read while reading sub header: rv=%d\n", rv); + goto err_out; + } + } + rv = drbd_cmd_handler[cmd].function(mdev, cmd, packet_size - shs); if (unlikely(!rv)) { -- cgit v1.2.3-70-g09d2 From a115413de13ae6beb0cbfc198afe385a261ab284 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Sat, 13 Nov 2010 20:42:29 +0100 Subject: drbd: fix for spin_lock_irqsave in endio callback In commit 9b7f76dc37919ea36caa9680a3f765e5b19b25fb, Author: Lars Ellenberg Date: Wed Aug 11 23:40:24 2010 +0200 drbd: new configuration parameter c-min-rate a bad chunk slipped through, which is now reverted as well, restoring the correct irqsave for the endio callback. This patch also add comments at both req_mod() and in the endio callback so it should not happen again. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_req.h | 3 ++- drivers/block/drbd/drbd_worker.c | 10 +++++++++- 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h index 181ea036482..ab2bd09d54b 100644 --- a/drivers/block/drbd/drbd_req.h +++ b/drivers/block/drbd/drbd_req.h @@ -339,7 +339,8 @@ static inline int _req_mod(struct drbd_request *req, enum drbd_req_event what) } /* completion of master bio is outside of spinlock. - * If you need it irqsave, do it your self! */ + * If you need it irqsave, do it your self! + * Which means: don't use from bio endio callback. */ static inline int req_mod(struct drbd_request *req, enum drbd_req_event what) { diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index 47d223c2409..34f224b018b 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -193,8 +193,10 @@ void drbd_endio_sec(struct bio *bio, int error) */ void drbd_endio_pri(struct bio *bio, int error) { + unsigned long flags; struct drbd_request *req = bio->bi_private; struct drbd_conf *mdev = req->mdev; + struct bio_and_error m; enum drbd_req_event what; int uptodate = bio_flagged(bio, BIO_UPTODATE); @@ -220,7 +222,13 @@ void drbd_endio_pri(struct bio *bio, int error) bio_put(req->private_bio); req->private_bio = ERR_PTR(error); - req_mod(req, what); + /* not req_mod(), we need irqsave here! */ + spin_lock_irqsave(&mdev->req_lock, flags); + __req_mod(req, what, &m); + spin_unlock_irqrestore(&mdev->req_lock, flags); + + if (m.bio) + complete_master_bio(mdev, &m); } int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel) -- cgit v1.2.3-70-g09d2 From 4cb6a614ba0e58cae8abdadbf73bcb4d37a3f599 Mon Sep 17 00:00:00 2001 From: Tracey Dent Date: Sun, 21 Nov 2010 15:23:50 +0000 Subject: Net: ceph: Makefile: Remove unnessary code Remove the if and else conditional because the code is in mainline and there is no need in it being there. Signed-off-by: Tracey Dent Signed-off-by: David S. Miller --- net/ceph/Makefile | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/net/ceph/Makefile b/net/ceph/Makefile index aab1cabb803..5f19415ec9c 100644 --- a/net/ceph/Makefile +++ b/net/ceph/Makefile @@ -1,9 +1,6 @@ # # Makefile for CEPH filesystem. # - -ifneq ($(KERNELRELEASE),) - obj-$(CONFIG_CEPH_LIB) += libceph.o libceph-objs := ceph_common.o messenger.o msgpool.o buffer.o pagelist.o \ @@ -16,22 +13,3 @@ libceph-objs := ceph_common.o messenger.o msgpool.o buffer.o pagelist.o \ ceph_fs.o ceph_strings.o ceph_hash.o \ pagevec.o -else -#Otherwise we were called directly from the command -# line; invoke the kernel build system. - -KERNELDIR ?= /lib/modules/$(shell uname -r)/build -PWD := $(shell pwd) - -default: all - -all: - $(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_LIB=m modules - -modules_install: - $(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_LIB=m modules_install - -clean: - $(MAKE) -C $(KERNELDIR) M=$(PWD) clean - -endif -- cgit v1.2.3-70-g09d2 From 8475ef9fd16cadbfc692f78e608d1941a340beb2 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Mon, 22 Nov 2010 03:26:12 +0000 Subject: netns: Don't leak others' openreq-s in proc The /proc/net/tcp leaks openreq sockets from other namespaces. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 69ccbc1dde9..e13da6de1fc 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -2043,7 +2043,9 @@ get_req: } get_sk: sk_nulls_for_each_from(sk, node) { - if (sk->sk_family == st->family && net_eq(sock_net(sk), net)) { + if (!net_eq(sock_net(sk), net)) + continue; + if (sk->sk_family == st->family) { cur = sk; goto out; } -- cgit v1.2.3-70-g09d2 From e7a3481c0246c8e45e79c629efd63b168e91fcda Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 25 Oct 2010 16:53:46 -0700 Subject: x86/pvclock: Zero last_value on resume If the guest domain has been suspend/resumed or migrated, then the system clock backing the pvclock clocksource may revert to a smaller value (ie, can be non-monotonic across the migration/save-restore). Make sure we zero last_value in that case so that the domain continues to see clock updates. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/include/asm/pvclock.h | 1 + arch/x86/kernel/pvclock.c | 5 +++++ arch/x86/xen/time.c | 2 ++ 3 files changed, 8 insertions(+) diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h index 7f7e577a0e3..31d84acc151 100644 --- a/arch/x86/include/asm/pvclock.h +++ b/arch/x86/include/asm/pvclock.h @@ -11,6 +11,7 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src); void pvclock_read_wallclock(struct pvclock_wall_clock *wall, struct pvclock_vcpu_time_info *vcpu, struct timespec *ts); +void pvclock_resume(void); /* * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c index 008b91eefa1..42eb3300dfc 100644 --- a/arch/x86/kernel/pvclock.c +++ b/arch/x86/kernel/pvclock.c @@ -83,6 +83,11 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src) static atomic64_t last_value = ATOMIC64_INIT(0); +void pvclock_resume(void) +{ + atomic64_set(&last_value, 0); +} + cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src) { struct pvclock_shadow_time shadow; diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index b2bb5aa3b05..5da5e53fb94 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -426,6 +426,8 @@ void xen_timer_resume(void) { int cpu; + pvclock_resume(); + if (xen_clockevent != &xen_vcpuop_clockevent) return; -- cgit v1.2.3-70-g09d2 From de18a29e0fa3904894b4e02fae0e712cd43f740c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sat, 27 Nov 2010 22:30:41 +0100 Subject: drm/i915: fix regression due to ba3d8d749b01548b9 We don't track gpu flush request in any special way. So even with obj->write_domain == 0, a gpu flush might be outstanding but no yet executed. Even worse, the latest request might use the object only for reading. So and unconditional call to object_wait_rendering is needed for !pipelined. Hence revert that patch fully and untangle the flushing from the synchronization again. Reported-by: Keith Packard Tested-by: Keith Packard Signed-off-by: Daniel Vetter Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_gem.c | 43 +++++++++++++++++------------------------ 1 file changed, 18 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 92b097dbe4f..5e54821af99 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -38,8 +38,7 @@ static uint32_t i915_gem_get_gtt_alignment(struct drm_gem_object *obj); -static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj, - bool pipelined); +static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, @@ -2594,7 +2593,7 @@ i915_gem_object_put_fence_reg(struct drm_gem_object *obj, if (reg->gpu) { int ret; - ret = i915_gem_object_flush_gpu_write_domain(obj, true); + ret = i915_gem_object_flush_gpu_write_domain(obj); if (ret) return ret; @@ -2742,8 +2741,7 @@ i915_gem_clflush_object(struct drm_gem_object *obj) /** Flushes any GPU write domain for the object if it's dirty. */ static int -i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj, - bool pipelined) +i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; uint32_t old_write_domain; @@ -2762,10 +2760,7 @@ i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj, obj->read_domains, old_write_domain); - if (pipelined) - return 0; - - return i915_gem_object_wait_rendering(obj, true); + return 0; } /** Flushes the GTT write domain for the object if it's dirty. */ @@ -2826,18 +2821,15 @@ i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) if (obj_priv->gtt_space == NULL) return -EINVAL; - ret = i915_gem_object_flush_gpu_write_domain(obj, false); + ret = i915_gem_object_flush_gpu_write_domain(obj); if (ret != 0) return ret; + ret = i915_gem_object_wait_rendering(obj, true); + if (ret) + return ret; i915_gem_object_flush_cpu_write_domain(obj); - if (write) { - ret = i915_gem_object_wait_rendering(obj, true); - if (ret) - return ret; - } - old_write_domain = obj->write_domain; old_read_domains = obj->read_domains; @@ -2875,7 +2867,7 @@ i915_gem_object_set_to_display_plane(struct drm_gem_object *obj, if (obj_priv->gtt_space == NULL) return -EINVAL; - ret = i915_gem_object_flush_gpu_write_domain(obj, true); + ret = i915_gem_object_flush_gpu_write_domain(obj); if (ret) return ret; @@ -2924,9 +2916,12 @@ i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) uint32_t old_write_domain, old_read_domains; int ret; - ret = i915_gem_object_flush_gpu_write_domain(obj, false); + ret = i915_gem_object_flush_gpu_write_domain(obj); if (ret != 0) return ret; + ret = i915_gem_object_wait_rendering(obj, true); + if (ret) + return ret; i915_gem_object_flush_gtt_write_domain(obj); @@ -2935,12 +2930,6 @@ i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) */ i915_gem_object_set_to_full_cpu_read_domain(obj); - if (write) { - ret = i915_gem_object_wait_rendering(obj, true); - if (ret) - return ret; - } - old_write_domain = obj->write_domain; old_read_domains = obj->read_domains; @@ -3205,9 +3194,13 @@ i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, if (offset == 0 && size == obj->size) return i915_gem_object_set_to_cpu_domain(obj, 0); - ret = i915_gem_object_flush_gpu_write_domain(obj, false); + ret = i915_gem_object_flush_gpu_write_domain(obj); if (ret != 0) return ret; + ret = i915_gem_object_wait_rendering(obj, true); + if (ret) + return ret; + i915_gem_object_flush_gtt_write_domain(obj); /* If we're already fully in the CPU read domain, we're done. */ -- cgit v1.2.3-70-g09d2 From 0147fc058d11bd4009b126d09974d2c8f48fef15 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 22 Nov 2010 12:54:21 +0000 Subject: tcp: restrict net.ipv4.tcp_adv_win_scale (#20312) tcp_win_from_space() does the following: if (sysctl_tcp_adv_win_scale <= 0) return space >> (-sysctl_tcp_adv_win_scale); else return space - (space >> sysctl_tcp_adv_win_scale); "space" is int. As per C99 6.5.7 (3) shifting int for 32 or more bits is undefined behaviour. Indeed, if sysctl_tcp_adv_win_scale is exactly 32, space >> 32 equals space and function returns 0. Which means we busyloop in tcp_fixup_rcvbuf(). Restrict net.ipv4.tcp_adv_win_scale to [-31, 31]. Fix https://bugzilla.kernel.org/show_bug.cgi?id=20312 Steps to reproduce: echo 32 >/proc/sys/net/ipv4/tcp_adv_win_scale wget www.kernel.org [softlockup] Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 1 + net/ipv4/sysctl_net_ipv4.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index fe95105992c..3c5e465296e 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER Count buffering overhead as bytes/2^tcp_adv_win_scale (if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale), if it is <= 0. + Possible values are [-31, 31], inclusive. Default: 2 tcp_allowed_congestion_control - STRING diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index e91911d7aae..1b4ec21497a 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -26,6 +26,8 @@ static int zero; static int tcp_retr1_max = 255; static int ip_local_port_range_min[] = { 1, 1 }; static int ip_local_port_range_max[] = { 65535, 65535 }; +static int tcp_adv_win_scale_min = -31; +static int tcp_adv_win_scale_max = 31; /* Update system visible IP port range */ static void set_local_port_range(int range[2]) @@ -426,7 +428,9 @@ static struct ctl_table ipv4_table[] = { .data = &sysctl_tcp_adv_win_scale, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec + .proc_handler = proc_dointvec_minmax, + .extra1 = &tcp_adv_win_scale_min, + .extra2 = &tcp_adv_win_scale_max, }, { .procname = "tcp_tw_reuse", -- cgit v1.2.3-70-g09d2 From 0ac78870220b6e0ac74dd9292bcfa7b18718babd Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Tue, 23 Nov 2010 02:36:56 +0000 Subject: dccp: fix error in updating the GAR This fixes a bug in updating the Greatest Acknowledgment number Received (GAR): the current implementation does not track the greatest received value - lower values in the range AWL..AWH (RFC 4340, 7.5.1) erase higher ones. Signed-off-by: Gerrit Renker Signed-off-by: David S. Miller --- net/dccp/input.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/dccp/input.c b/net/dccp/input.c index 265985370fa..e424a09e83f 100644 --- a/net/dccp/input.c +++ b/net/dccp/input.c @@ -239,7 +239,8 @@ static int dccp_check_seqno(struct sock *sk, struct sk_buff *skb) dccp_update_gsr(sk, seqno); if (dh->dccph_type != DCCP_PKT_SYNC && - (ackno != DCCP_PKT_WITHOUT_ACK_SEQ)) + ackno != DCCP_PKT_WITHOUT_ACK_SEQ && + after48(ackno, dp->dccps_gar)) dp->dccps_gar = ackno; } else { unsigned long now = jiffies; -- cgit v1.2.3-70-g09d2 From 462ca99c2ff6caae94dde5c05b56b54f6c01602a Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Tue, 23 Nov 2010 06:40:25 +0000 Subject: au1000_eth: fix invalid address accessing the MAC enable register "aup->enable" holds already the address pointing to the MAC enable register. The bug was introduced by commit d0e7cb: "au1000-eth: remove volatiles, switch to I/O accessors". CC: Florian Fainelli Signed-off-by: Wolfgang Grandegger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/au1000_eth.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 43489f89c14..53eff9ba6e9 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -155,10 +155,10 @@ static void au1000_enable_mac(struct net_device *dev, int force_reset) spin_lock_irqsave(&aup->lock, flags); if (force_reset || (!aup->mac_enabled)) { - writel(MAC_EN_CLOCK_ENABLE, &aup->enable); + writel(MAC_EN_CLOCK_ENABLE, aup->enable); au_sync_delay(2); writel((MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2 - | MAC_EN_CLOCK_ENABLE), &aup->enable); + | MAC_EN_CLOCK_ENABLE), aup->enable); au_sync_delay(2); aup->mac_enabled = 1; @@ -503,9 +503,9 @@ static void au1000_reset_mac_unlocked(struct net_device *dev) au1000_hard_stop(dev); - writel(MAC_EN_CLOCK_ENABLE, &aup->enable); + writel(MAC_EN_CLOCK_ENABLE, aup->enable); au_sync_delay(2); - writel(0, &aup->enable); + writel(0, aup->enable); au_sync_delay(2); aup->tx_full = 0; @@ -1119,7 +1119,7 @@ static int __devinit au1000_probe(struct platform_device *pdev) /* set a random MAC now in case platform_data doesn't provide one */ random_ether_addr(dev->dev_addr); - writel(0, &aup->enable); + writel(0, aup->enable); aup->mac_enabled = 0; pd = pdev->dev.platform_data; -- cgit v1.2.3-70-g09d2 From 3c6f27bf33052ea6ba9d82369fb460726fb779c0 Mon Sep 17 00:00:00 2001 From: Dan Rosenberg Date: Tue, 23 Nov 2010 11:02:13 +0000 Subject: DECnet: don't leak uninitialized stack byte A single uninitialized padding byte is leaked to userspace. Signed-off-by: Dan Rosenberg CC: stable Signed-off-by: David S. Miller --- net/decnet/af_decnet.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index a76b78de679..6f97268ed85 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -1556,6 +1556,8 @@ static int __dn_getsockopt(struct socket *sock, int level,int optname, char __us if (r_len > sizeof(struct linkinfo_dn)) r_len = sizeof(struct linkinfo_dn); + memset(&link, 0, sizeof(link)); + switch(sock->state) { case SS_CONNECTING: link.idn_linkstate = LL_CONNECTING; -- cgit v1.2.3-70-g09d2 From bcc70bb3aeae7c3d035881d41055685f08a2b745 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Tue, 23 Nov 2010 11:43:44 +0000 Subject: net, ppp: Report correct error code if unit allocation failed Allocating unit from ird might return several error codes not only -EAGAIN, so it should not be changed and returned precisely. Same time unit release procedure should be invoked only if device is unregistering. Signed-off-by: Cyrill Gorcunov CC: Paul Mackerras Signed-off-by: David S. Miller --- drivers/net/ppp_generic.c | 43 ++++++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 21 deletions(-) diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 09cf56d0416..39659976a1a 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -2584,16 +2584,16 @@ ppp_create_interface(struct net *net, int unit, int *retp) */ dev_net_set(dev, net); - ret = -EEXIST; mutex_lock(&pn->all_ppp_mutex); if (unit < 0) { unit = unit_get(&pn->units_idr, ppp); if (unit < 0) { - *retp = unit; + ret = unit; goto out2; } } else { + ret = -EEXIST; if (unit_find(&pn->units_idr, unit)) goto out2; /* unit already exists */ /* @@ -2668,10 +2668,10 @@ static void ppp_shutdown_interface(struct ppp *ppp) ppp->closing = 1; ppp_unlock(ppp); unregister_netdev(ppp->dev); + unit_put(&pn->units_idr, ppp->file.index); } else ppp_unlock(ppp); - unit_put(&pn->units_idr, ppp->file.index); ppp->file.dead = 1; ppp->owner = NULL; wake_up_interruptible(&ppp->file.rwait); @@ -2859,8 +2859,7 @@ static void __exit ppp_cleanup(void) * by holding all_ppp_mutex */ -/* associate pointer with specified number */ -static int unit_set(struct idr *p, void *ptr, int n) +static int __unit_alloc(struct idr *p, void *ptr, int n) { int unit, err; @@ -2871,10 +2870,24 @@ again: } err = idr_get_new_above(p, ptr, n, &unit); - if (err == -EAGAIN) - goto again; + if (err < 0) { + if (err == -EAGAIN) + goto again; + return err; + } + + return unit; +} + +/* associate pointer with specified number */ +static int unit_set(struct idr *p, void *ptr, int n) +{ + int unit; - if (unit != n) { + unit = __unit_alloc(p, ptr, n); + if (unit < 0) + return unit; + else if (unit != n) { idr_remove(p, unit); return -EINVAL; } @@ -2885,19 +2898,7 @@ again: /* get new free unit number and associate pointer with it */ static int unit_get(struct idr *p, void *ptr) { - int unit, err; - -again: - if (!idr_pre_get(p, GFP_KERNEL)) { - printk(KERN_ERR "PPP: No free memory for idr\n"); - return -ENOMEM; - } - - err = idr_get_new_above(p, ptr, 0, &unit); - if (err == -EAGAIN) - goto again; - - return unit; + return __unit_alloc(p, ptr, 0); } /* put unit number back to a pool */ -- cgit v1.2.3-70-g09d2 From 42eb59d3a80ff83b4cacb92dcc44b22da7d4969b Mon Sep 17 00:00:00 2001 From: Casey Leedom Date: Wed, 24 Nov 2010 12:23:57 +0000 Subject: cxgb4vf: fix setting unicast/multicast addresses ... We were truncating the number of unicast and multicast MAC addresses supported. Additionally, we were incorrectly computing the MAC Address hash (a "1 << N" where we needed a "1ULL << N"). Signed-off-by: Casey Leedom Signed-off-by: David S. Miller --- drivers/net/cxgb4vf/cxgb4vf_main.c | 73 +++++++++++++++++------------ drivers/net/cxgb4vf/t4vf_hw.c | 94 ++++++++++++++++++++++++-------------- 2 files changed, 104 insertions(+), 63 deletions(-) diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c index c3449bbc585..d887a76cd39 100644 --- a/drivers/net/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/cxgb4vf/cxgb4vf_main.c @@ -816,40 +816,48 @@ static struct net_device_stats *cxgb4vf_get_stats(struct net_device *dev) } /* - * Collect up to maxaddrs worth of a netdevice's unicast addresses into an - * array of addrss pointers and return the number collected. + * Collect up to maxaddrs worth of a netdevice's unicast addresses, starting + * at a specified offset within the list, into an array of addrss pointers and + * return the number collected. */ -static inline int collect_netdev_uc_list_addrs(const struct net_device *dev, - const u8 **addr, - unsigned int maxaddrs) +static inline unsigned int collect_netdev_uc_list_addrs(const struct net_device *dev, + const u8 **addr, + unsigned int offset, + unsigned int maxaddrs) { + unsigned int index = 0; unsigned int naddr = 0; const struct netdev_hw_addr *ha; - for_each_dev_addr(dev, ha) { - addr[naddr++] = ha->addr; - if (naddr >= maxaddrs) - break; - } + for_each_dev_addr(dev, ha) + if (index++ >= offset) { + addr[naddr++] = ha->addr; + if (naddr >= maxaddrs) + break; + } return naddr; } /* - * Collect up to maxaddrs worth of a netdevice's multicast addresses into an - * array of addrss pointers and return the number collected. + * Collect up to maxaddrs worth of a netdevice's multicast addresses, starting + * at a specified offset within the list, into an array of addrss pointers and + * return the number collected. */ -static inline int collect_netdev_mc_list_addrs(const struct net_device *dev, - const u8 **addr, - unsigned int maxaddrs) +static inline unsigned int collect_netdev_mc_list_addrs(const struct net_device *dev, + const u8 **addr, + unsigned int offset, + unsigned int maxaddrs) { + unsigned int index = 0; unsigned int naddr = 0; const struct netdev_hw_addr *ha; - netdev_for_each_mc_addr(ha, dev) { - addr[naddr++] = ha->addr; - if (naddr >= maxaddrs) - break; - } + netdev_for_each_mc_addr(ha, dev) + if (index++ >= offset) { + addr[naddr++] = ha->addr; + if (naddr >= maxaddrs) + break; + } return naddr; } @@ -862,16 +870,20 @@ static int set_addr_filters(const struct net_device *dev, bool sleep) u64 mhash = 0; u64 uhash = 0; bool free = true; - u16 filt_idx[7]; + unsigned int offset, naddr; const u8 *addr[7]; - int ret, naddr = 0; + int ret; const struct port_info *pi = netdev_priv(dev); /* first do the secondary unicast addresses */ - naddr = collect_netdev_uc_list_addrs(dev, addr, ARRAY_SIZE(addr)); - if (naddr > 0) { + for (offset = 0; ; offset += naddr) { + naddr = collect_netdev_uc_list_addrs(dev, addr, offset, + ARRAY_SIZE(addr)); + if (naddr == 0) + break; + ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free, - naddr, addr, filt_idx, &uhash, sleep); + naddr, addr, NULL, &uhash, sleep); if (ret < 0) return ret; @@ -879,12 +891,17 @@ static int set_addr_filters(const struct net_device *dev, bool sleep) } /* next set up the multicast addresses */ - naddr = collect_netdev_mc_list_addrs(dev, addr, ARRAY_SIZE(addr)); - if (naddr > 0) { + for (offset = 0; ; offset += naddr) { + naddr = collect_netdev_mc_list_addrs(dev, addr, offset, + ARRAY_SIZE(addr)); + if (naddr == 0) + break; + ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free, - naddr, addr, filt_idx, &mhash, sleep); + naddr, addr, NULL, &mhash, sleep); if (ret < 0) return ret; + free = false; } return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0, diff --git a/drivers/net/cxgb4vf/t4vf_hw.c b/drivers/net/cxgb4vf/t4vf_hw.c index e306c20dfae..19520afe1a1 100644 --- a/drivers/net/cxgb4vf/t4vf_hw.c +++ b/drivers/net/cxgb4vf/t4vf_hw.c @@ -1014,48 +1014,72 @@ int t4vf_alloc_mac_filt(struct adapter *adapter, unsigned int viid, bool free, unsigned int naddr, const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok) { - int i, ret; + int offset, ret = 0; + unsigned nfilters = 0; + unsigned int rem = naddr; struct fw_vi_mac_cmd cmd, rpl; - struct fw_vi_mac_exact *p; - size_t len16; - if (naddr > ARRAY_SIZE(cmd.u.exact)) + if (naddr > FW_CLS_TCAM_NUM_ENTRIES) return -EINVAL; - len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, - u.exact[naddr]), 16); - memset(&cmd, 0, sizeof(cmd)); - cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) | - FW_CMD_REQUEST | - FW_CMD_WRITE | - (free ? FW_CMD_EXEC : 0) | - FW_VI_MAC_CMD_VIID(viid)); - cmd.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) | - FW_CMD_LEN16(len16)); + for (offset = 0; offset < naddr; /**/) { + unsigned int fw_naddr = (rem < ARRAY_SIZE(cmd.u.exact) + ? rem + : ARRAY_SIZE(cmd.u.exact)); + size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, + u.exact[fw_naddr]), 16); + struct fw_vi_mac_exact *p; + int i; - for (i = 0, p = cmd.u.exact; i < naddr; i++, p++) { - p->valid_to_idx = - cpu_to_be16(FW_VI_MAC_CMD_VALID | - FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC)); - memcpy(p->macaddr, addr[i], sizeof(p->macaddr)); - } + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + (free ? FW_CMD_EXEC : 0) | + FW_VI_MAC_CMD_VIID(viid)); + cmd.freemacs_to_len16 = + cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) | + FW_CMD_LEN16(len16)); + + for (i = 0, p = cmd.u.exact; i < fw_naddr; i++, p++) { + p->valid_to_idx = cpu_to_be16( + FW_VI_MAC_CMD_VALID | + FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC)); + memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr)); + } + + + ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl, + sleep_ok); + if (ret && ret != -ENOMEM) + break; - ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl, sleep_ok); - if (ret) - return ret; - - for (i = 0, p = rpl.u.exact; i < naddr; i++, p++) { - u16 index = FW_VI_MAC_CMD_IDX_GET(be16_to_cpu(p->valid_to_idx)); - - if (idx) - idx[i] = (index >= FW_CLS_TCAM_NUM_ENTRIES - ? 0xffff - : index); - if (index < FW_CLS_TCAM_NUM_ENTRIES) - ret++; - else if (hash) - *hash |= (1 << hash_mac_addr(addr[i])); + for (i = 0, p = rpl.u.exact; i < fw_naddr; i++, p++) { + u16 index = FW_VI_MAC_CMD_IDX_GET( + be16_to_cpu(p->valid_to_idx)); + + if (idx) + idx[offset+i] = + (index >= FW_CLS_TCAM_NUM_ENTRIES + ? 0xffff + : index); + if (index < FW_CLS_TCAM_NUM_ENTRIES) + nfilters++; + else if (hash) + *hash |= (1ULL << hash_mac_addr(addr[offset+i])); + } + + free = false; + offset += fw_naddr; + rem -= fw_naddr; } + + /* + * If there were no errors or we merely ran out of room in our MAC + * address arena, return the number of filters actually written. + */ + if (ret == 0 || ret == -ENOMEM) + ret = nfilters; return ret; } -- cgit v1.2.3-70-g09d2 From 03fe5f3ef7eab88e1405baa52a7923fbf337230b Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 24 Nov 2010 13:54:54 +0000 Subject: NET: wan/x25_asy, move lapb_unregister to x25_asy_close_tty We register lapb when tty is created, but unregister it only when the device is UP. So move the lapb_unregister to x25_asy_close_tty after the device is down. The old behaviour causes ldisc switching to fail each second attempt, because we noted for us that the device is unused, so we use it the second time, but labp layer still have it registered, so it fails obviously. Signed-off-by: Jiri Slaby Reported-by: Sergey Lapin Cc: Andrew Hendry Tested-by: Sergey Lapin Tested-by: Mikhail Ulyanov Signed-off-by: David S. Miller --- drivers/net/wan/x25_asy.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index d81ad839788..cf05504d951 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -498,7 +498,6 @@ norbuff: static int x25_asy_close(struct net_device *dev) { struct x25_asy *sl = netdev_priv(dev); - int err; spin_lock(&sl->lock); if (sl->tty) @@ -507,10 +506,6 @@ static int x25_asy_close(struct net_device *dev) netif_stop_queue(dev); sl->rcount = 0; sl->xleft = 0; - err = lapb_unregister(dev); - if (err != LAPB_OK) - printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n", - err); spin_unlock(&sl->lock); return 0; } @@ -595,6 +590,7 @@ static int x25_asy_open_tty(struct tty_struct *tty) static void x25_asy_close_tty(struct tty_struct *tty) { struct x25_asy *sl = tty->disc_data; + int err; /* First make sure we're connected. */ if (!sl || sl->magic != X25_ASY_MAGIC) @@ -605,6 +601,11 @@ static void x25_asy_close_tty(struct tty_struct *tty) dev_close(sl->dev); rtnl_unlock(); + err = lapb_unregister(sl->dev); + if (err != LAPB_OK) + printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n", + err); + tty->disc_data = NULL; sl->tty = NULL; x25_asy_free(sl); -- cgit v1.2.3-70-g09d2 From 8e65c0ece6f2aa732f9b755331869c67aeb1c7f6 Mon Sep 17 00:00:00 2001 From: Filip Aben Date: Thu, 25 Nov 2010 03:40:50 +0000 Subject: hso: fix disable_net The HSO driver incorrectly creates a serial device instead of a net device when disable_net is set. It shouldn't create anything for the network interface. Signed-off-by: Filip Aben Reported-by: Piotr Isajew Reported-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index b154a94de03..62e9e8dc819 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2994,12 +2994,14 @@ static int hso_probe(struct usb_interface *interface, case HSO_INTF_BULK: /* It's a regular bulk interface */ - if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) && - !disable_net) - hso_dev = hso_create_net_device(interface, port_spec); - else + if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) { + if (!disable_net) + hso_dev = + hso_create_net_device(interface, port_spec); + } else { hso_dev = hso_create_bulk_serial_device(interface, port_spec); + } if (!hso_dev) goto exit; break; -- cgit v1.2.3-70-g09d2 From 163cf09c2a0ee5cac6285f9347975bd1e97725da Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Sun, 28 Nov 2010 19:56:33 -0500 Subject: Btrfs: deal with DIO bios that span more than one ordered extent The new DIO bio splitting code has problems when the bio spans more than one ordered extent. This will happen as the generic DIO code merges our get_blocks calls together into a bigger single bio. This fixes things by walking forward in the ordered extent code finding all the overlapping ordered extents and completing them all at once. Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 23 ++++++++++++++--- fs/btrfs/ordered-data.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/ordered-data.h | 3 +++ 3 files changed, 89 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 6df921f218f..0f34cae0a63 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5602,15 +5602,18 @@ static void btrfs_endio_direct_write(struct bio *bio, int err) struct btrfs_trans_handle *trans; struct btrfs_ordered_extent *ordered = NULL; struct extent_state *cached_state = NULL; + u64 ordered_offset = dip->logical_offset; + u64 ordered_bytes = dip->bytes; int ret; if (err) goto out_done; - - ret = btrfs_dec_test_ordered_pending(inode, &ordered, - dip->logical_offset, dip->bytes); +again: + ret = btrfs_dec_test_first_ordered_pending(inode, &ordered, + &ordered_offset, + ordered_bytes); if (!ret) - goto out_done; + goto out_test; BUG_ON(!ordered); @@ -5670,8 +5673,20 @@ out_unlock: out: btrfs_delalloc_release_metadata(inode, ordered->len); btrfs_end_transaction(trans, root); + ordered_offset = ordered->file_offset + ordered->len; btrfs_put_ordered_extent(ordered); btrfs_put_ordered_extent(ordered); + +out_test: + /* + * our bio might span multiple ordered extents. If we haven't + * completed the accounting for the whole dio, go back and try again + */ + if (ordered_offset < dip->logical_offset + dip->bytes) { + ordered_bytes = dip->logical_offset + dip->bytes - + ordered_offset; + goto again; + } out_done: bio->bi_private = dip->private; diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index f4621f6deca..ae7737e352c 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -248,6 +248,73 @@ int btrfs_add_ordered_sum(struct inode *inode, return 0; } +/* + * this is used to account for finished IO across a given range + * of the file. The IO may span ordered extents. If + * a given ordered_extent is completely done, 1 is returned, otherwise + * 0. + * + * test_and_set_bit on a flag in the struct btrfs_ordered_extent is used + * to make sure this function only returns 1 once for a given ordered extent. + * + * file_offset is updated to one byte past the range that is recorded as + * complete. This allows you to walk forward in the file. + */ +int btrfs_dec_test_first_ordered_pending(struct inode *inode, + struct btrfs_ordered_extent **cached, + u64 *file_offset, u64 io_size) +{ + struct btrfs_ordered_inode_tree *tree; + struct rb_node *node; + struct btrfs_ordered_extent *entry = NULL; + int ret; + u64 dec_end; + u64 dec_start; + u64 to_dec; + + tree = &BTRFS_I(inode)->ordered_tree; + spin_lock(&tree->lock); + node = tree_search(tree, *file_offset); + if (!node) { + ret = 1; + goto out; + } + + entry = rb_entry(node, struct btrfs_ordered_extent, rb_node); + if (!offset_in_entry(entry, *file_offset)) { + ret = 1; + goto out; + } + + dec_start = max(*file_offset, entry->file_offset); + dec_end = min(*file_offset + io_size, entry->file_offset + + entry->len); + *file_offset = dec_end; + if (dec_start > dec_end) { + printk(KERN_CRIT "bad ordering dec_start %llu end %llu\n", + (unsigned long long)dec_start, + (unsigned long long)dec_end); + } + to_dec = dec_end - dec_start; + if (to_dec > entry->bytes_left) { + printk(KERN_CRIT "bad ordered accounting left %llu size %llu\n", + (unsigned long long)entry->bytes_left, + (unsigned long long)to_dec); + } + entry->bytes_left -= to_dec; + if (entry->bytes_left == 0) + ret = test_and_set_bit(BTRFS_ORDERED_IO_DONE, &entry->flags); + else + ret = 1; +out: + if (!ret && cached && entry) { + *cached = entry; + atomic_inc(&entry->refs); + } + spin_unlock(&tree->lock); + return ret == 0; +} + /* * this is used to account for finished IO across a given range * of the file. The IO should not span ordered extents. If diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h index 8ac365492a3..61dca83119d 100644 --- a/fs/btrfs/ordered-data.h +++ b/fs/btrfs/ordered-data.h @@ -141,6 +141,9 @@ int btrfs_remove_ordered_extent(struct inode *inode, int btrfs_dec_test_ordered_pending(struct inode *inode, struct btrfs_ordered_extent **cached, u64 file_offset, u64 io_size); +int btrfs_dec_test_first_ordered_pending(struct inode *inode, + struct btrfs_ordered_extent **cached, + u64 *file_offset, u64 io_size); int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset, u64 start, u64 len, u64 disk_len, int type); int btrfs_add_ordered_extent_dio(struct inode *inode, u64 file_offset, -- cgit v1.2.3-70-g09d2 From 5c7e57f7cddb83d81d83fefa5822dfe80891130e Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 26 Nov 2010 07:26:27 +0000 Subject: ehea: Add some info messages and fix an issue This patch adds some debug information about ehea not being able to allocate enough spaces. Also it correctly updates the amount of available skb. Signed-off-by: Breno Leitao Signed-off-by: David S. Miller --- drivers/net/ehea/ehea_main.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 182b2a7be8d..3d0af08483a 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -400,6 +400,7 @@ static void ehea_refill_rq1(struct ehea_port_res *pr, int index, int nr_of_wqes) skb_arr_rq1[index] = netdev_alloc_skb(dev, EHEA_L_PKT_SIZE); if (!skb_arr_rq1[index]) { + ehea_info("Unable to allocate enough skb in the array\n"); pr->rq1_skba.os_skbs = fill_wqes - i; break; } @@ -422,13 +423,20 @@ static void ehea_init_fill_rq1(struct ehea_port_res *pr, int nr_rq1a) struct net_device *dev = pr->port->netdev; int i; - for (i = 0; i < pr->rq1_skba.len; i++) { + if (nr_rq1a > pr->rq1_skba.len) { + ehea_error("NR_RQ1A bigger than skb array len\n"); + return; + } + + for (i = 0; i < nr_rq1a; i++) { skb_arr_rq1[i] = netdev_alloc_skb(dev, EHEA_L_PKT_SIZE); - if (!skb_arr_rq1[i]) + if (!skb_arr_rq1[i]) { + ehea_info("No enough memory to allocate skb array\n"); break; + } } /* Ring doorbell */ - ehea_update_rq1a(pr->qp, nr_rq1a); + ehea_update_rq1a(pr->qp, i); } static int ehea_refill_rq_def(struct ehea_port_res *pr, @@ -735,8 +743,10 @@ static int ehea_proc_rwqes(struct net_device *dev, skb = netdev_alloc_skb(dev, EHEA_L_PKT_SIZE); - if (!skb) + if (!skb) { + ehea_info("Not enough memory to allocate skb\n"); break; + } } skb_copy_to_linear_data(skb, ((char *)cqe) + 64, cqe->num_bytes_transfered - 4); -- cgit v1.2.3-70-g09d2 From b4ff3c90e6066bacc8a92111752fe9e4f4c45cca Mon Sep 17 00:00:00 2001 From: Nagendra Tomar Date: Fri, 26 Nov 2010 14:26:27 +0000 Subject: inet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners inet sockets corresponding to passive connections are added to the bind hash using ___inet_inherit_port(). These sockets are later removed from the bind hash using __inet_put_port(). These two functions are not exactly symmetrical. __inet_put_port() decrements hashinfo->bsockets and tb->num_owners, whereas ___inet_inherit_port() does not increment them. This results in both of these going to -ve values. This patch fixes this by calling inet_bind_hash() from ___inet_inherit_port(), which does the right thing. 'bsockets' and 'num_owners' were introduced by commit a9d8f9110d7e953c (inet: Allowing more than 64k connections and heavily optimize bind(0)) Signed-off-by: Nagendra Singh Tomar Acked-by: Eric Dumazet Acked-by: Evgeniy Polyakov Signed-off-by: David S. Miller --- net/ipv4/inet_hashtables.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index 1b344f30b46..3c0369a3a66 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -133,8 +133,7 @@ int __inet_inherit_port(struct sock *sk, struct sock *child) } } } - sk_add_bind_node(child, &tb->owners); - inet_csk(child)->icsk_bind_hash = tb; + inet_bind_hash(child, tb, port); spin_unlock(&head->lock); return 0; -- cgit v1.2.3-70-g09d2 From d830418e4085d65b3f8bad3216a37bc986ecd17d Mon Sep 17 00:00:00 2001 From: Yang Li Date: Thu, 25 Nov 2010 23:29:58 +0000 Subject: ucc_geth: fix ucc halt problem in half duplex mode In commit 58933c64(ucc_geth: Fix the wrong the Rx/Tx FIFO size), the UCC_GETH_UTFTT_INIT is set to 512 based on the recommendation of the QE Reference Manual. But that will sometimes cause tx halt while working in half duplex mode. According to errata draft QE_GENERAL-A003(High Tx Virtual FIFO threshold size can cause UCC to halt), setting UTFTT less than [(UTFS x (M - 8)/M) - 128] will prevent this from happening (M is the minimum buffer size). The patch changes UTFTT back to 256. Signed-off-by: Li Yang Cc: Jean-Denis Boyer Cc: Andreas Schmitz Cc: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/ucc_geth.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index 05a95586f3c..055b87ab4f0 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -899,7 +899,8 @@ struct ucc_geth_hardware_statistics { #define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size */ #define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */ -#define UCC_GETH_UTFTT_INIT 512 +#define UCC_GETH_UTFTT_INIT 256 /* 1/2 utfs + due to errata */ /* Gigabit Ethernet (1000 Mbps) */ #define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual FIFO size */ -- cgit v1.2.3-70-g09d2 From 4bd5d259e451d35380de2fcd1a3510ae22d000a3 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 26 Nov 2010 09:40:22 +0000 Subject: sh: Add div6_reparent_clks to clock framework for FSI Current clk_ops doesn't support .init which is used to select external clock on ecovec without CONFIG_SH_CLK_CPG_LEGACY. To solve this problem, this patch add div6_reparent_clks to clock-sh7724. This patch solve compile error too. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 34 ++++---------------------- arch/sh/include/cpu-sh4/cpu/sh7724.h | 3 +++ arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 44 ++++++++++++++++++++++++++++++---- 3 files changed, 46 insertions(+), 35 deletions(-) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 2eaeb9e5958..f48c492a68d 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -720,32 +720,6 @@ static struct platform_device camera_devices[] = { }; /* FSI */ -/* - * FSI-B use external clock which came from da7210. - * So, we should change parent of fsi - */ -#define FCLKBCR 0xa415000c -static void fsimck_init(struct clk *clk) -{ - u32 status = __raw_readl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - - __raw_writel(status, clk->enable_reg); -} - -static struct clk_ops fsimck_clk_ops = { - .init = fsimck_init, -}; - -static struct clk fsimckb_clk = { - .ops = &fsimck_clk_ops, - .enable_reg = (void __iomem *)FCLKBCR, - .rate = 0, /* unknown */ -}; - static struct sh_fsi_platform_info fsi_info = { .portb_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | @@ -1264,10 +1238,10 @@ static int __init arch_setup(void) /* change parent of FSI B */ clk = clk_get(NULL, "fsib_clk"); if (!IS_ERR(clk)) { - clk_register(&fsimckb_clk); - clk_set_parent(clk, &fsimckb_clk); - clk_set_rate(clk, 11000); - clk_set_rate(&fsimckb_clk, 11000); + /* 48kHz dummy clock was used to make sure 1/1 divide */ + clk_set_rate(&sh7724_fsimckb_clk, 48000); + clk_set_parent(clk, &sh7724_fsimckb_clk); + clk_set_rate(clk, 48000); clk_put(clk); } diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h index 4c27b68789b..7eb43599942 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7724.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h @@ -303,4 +303,7 @@ enum { SHDMA_SLAVE_SDHI1_RX, }; +extern struct clk sh7724_fsimcka_clk; +extern struct clk sh7724_fsimckb_clk; + #endif /* __ASM_SH7724_H__ */ diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index 0fe2e9329cb..271c0b325a9 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -111,12 +111,21 @@ static struct clk div3_clk = { .parent = &pll_clk, }; +/* External input clock (pin name: FSIMCKA/FSIMCKB ) */ +struct clk sh7724_fsimcka_clk = { +}; + +struct clk sh7724_fsimckb_clk = { +}; + static struct clk *main_clks[] = { &r_clk, &extal_clk, &fll_clk, &pll_clk, &div3_clk, + &sh7724_fsimcka_clk, + &sh7724_fsimckb_clk, }; static void div4_kick(struct clk *clk) @@ -154,16 +163,38 @@ struct clk div4_clks[DIV4_NR] = { [DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT), }; -enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR }; +enum { DIV6_V, DIV6_I, DIV6_S, DIV6_NR }; static struct clk div6_clks[DIV6_NR] = { [DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0), - [DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0), - [DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0), [DIV6_I] = SH_CLK_DIV6(&div3_clk, IRDACLKCR, 0), [DIV6_S] = SH_CLK_DIV6(&div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT), }; +enum { DIV6_FA, DIV6_FB, DIV6_REPARENT_NR }; + +/* Indices are important - they are the actual src selecting values */ +static struct clk *fclkacr_parent[] = { + [0] = &div3_clk, + [1] = NULL, + [2] = &sh7724_fsimcka_clk, + [3] = NULL, +}; + +static struct clk *fclkbcr_parent[] = { + [0] = &div3_clk, + [1] = NULL, + [2] = &sh7724_fsimckb_clk, + [3] = NULL, +}; + +static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { + [DIV6_FA] = SH_CLK_DIV6_EXT(&div3_clk, FCLKACR, 0, + fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2), + [DIV6_FB] = SH_CLK_DIV6_EXT(&div3_clk, FCLKBCR, 0, + fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2), +}; + static struct clk mstp_clks[HWBLK_NR] = { SH_HWBLK_CLK(HWBLK_TLB, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT), SH_HWBLK_CLK(HWBLK_IC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT), @@ -240,8 +271,8 @@ static struct clk_lookup lookups[] = { /* DIV6 clocks */ CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]), - CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]), - CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]), + CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FA]), + CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FB]), CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]), CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]), @@ -375,6 +406,9 @@ int __init arch_clk_init(void) if (!ret) ret = sh_clk_div6_register(div6_clks, DIV6_NR); + if (!ret) + ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR); + if (!ret) ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR); -- cgit v1.2.3-70-g09d2 From 193006f7e3b1abd42d7a3677b54fa2996461a842 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 26 Nov 2010 17:06:28 +0000 Subject: sh: boards: mach-se: use IS_ERR() instead of NULL check clk_get() returns ERR_PTR() on error, not NULL. Signed-off-by: Vasiliy Kulikov Reviewed-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index c31d228fdfc..673530500e2 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -871,14 +871,14 @@ static int __init devices_setup(void) /* set SPU2 clock to 83.4 MHz */ clk = clk_get(NULL, "spu_clk"); - if (clk) { + if (!IS_ERR(clk)) { clk_set_rate(clk, clk_round_rate(clk, 83333333)); clk_put(clk); } /* change parent of FSI A */ clk = clk_get(NULL, "fsia_clk"); - if (clk) { + if (!IS_ERR(clk)) { clk_register(&fsimcka_clk); clk_set_parent(clk, &fsimcka_clk); clk_set_rate(clk, 11000); -- cgit v1.2.3-70-g09d2 From bf9dc102e284a5aa78c73fc9d72e11d5ccd8669f Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 26 Nov 2010 10:45:58 -0800 Subject: drm: Set connector DPMS status to ON in drm_crtc_helper_set_config When setting a new crtc configuration, force the DPMS state of all connectors to ON. Otherwise, they'll be left at OFF and a future mode set that disables the specified connector will not turn the connector off. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index f7af91cb273..232ee931b4d 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -471,6 +471,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) int count = 0, ro, fail = 0; struct drm_crtc_helper_funcs *crtc_funcs; int ret = 0; + int i; DRM_DEBUG_KMS("\n"); @@ -666,6 +667,12 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) if (ret != 0) goto fail; } + DRM_DEBUG_KMS("Setting connector DPMS state to on\n"); + for (i = 0; i < set->num_connectors; i++) { + DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id, + drm_get_connector_name(set->connectors[i])); + set->connectors[i]->dpms = DRM_MODE_DPMS_ON; + } kfree(save_connectors); kfree(save_encoders); -- cgit v1.2.3-70-g09d2 From c5027dec02c96964847fa68d512318ee5f6f7a19 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 26 Nov 2010 10:45:59 -0800 Subject: drm: record monitor status in output_poll_execute In order to correctly report monitor connected status changes, the previous monitor status must be recorded in the connector->status value instead of being discarded. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 232ee931b4d..7ca59359fee 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -848,7 +848,7 @@ static void output_poll_execute(struct work_struct *work) struct delayed_work *delayed_work = to_delayed_work(work); struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work); struct drm_connector *connector; - enum drm_connector_status old_status, status; + enum drm_connector_status old_status; bool repoll = false, changed = false; if (!drm_kms_helper_poll) @@ -873,8 +873,9 @@ static void output_poll_execute(struct work_struct *work) !(connector->polled & DRM_CONNECTOR_POLL_HPD)) continue; - status = connector->funcs->detect(connector, false); - if (old_status != status) + connector->status = connector->funcs->detect(connector, false); + DRM_DEBUG_KMS("connector status updated to %d\n", connector->status); + if (old_status != connector->status) changed = true; } -- cgit v1.2.3-70-g09d2 From ac70eb1305d5a81efd1e32327d7e79be15a63a5a Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Sat, 27 Nov 2010 13:58:04 -0500 Subject: ALSA: hda: Use BIOS auto-parsing instead of existing model quirk for MEDION MD2 BugLink: https://launchpad.net/bugs/682199 A 2.6.35 (Ubuntu Maverick) user, burningphantom1, reported a regression in audio: playback was inaudible through both speakers and headphones. In commit 272a527c04 of sound-2.6.git, a new model was added with this machine's PCI SSID. Fortunately, it is now sufficient to use the auto model for BIOS auto-parsing instead of the existing quirk. Playback, capture, and jack sense were verified working for both 2.6.35 and the alsa-driver snapshot from 2010-11-27 when model=auto is used. Reported-and-tested-by: burningphantom1 Cc: [2.6.35+] Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 886d7c72936..8fddc9d0872 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9865,7 +9865,6 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763), SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763), SND_PCI_QUIRK(0x17aa, 0x101d, "Lenovo Sky", ALC888_LENOVO_SKY), - SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2), SND_PCI_QUIRK(0x17c0, 0x4085, "MEDION MD96630", ALC888_LENOVO_MS7195_DIG), SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66), -- cgit v1.2.3-70-g09d2 From e4dde731ae70072338352c6f8fb75fd04a42cf8d Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 29 Nov 2010 10:19:07 +0200 Subject: vhost: correctly set bits of dirty pages Fix two bugs in dirty page logging: When counting pages we should increase address by 1 instead of VHOST_PAGE_SIZE. Make log_write() correctly process requests that cross pages with write_address not starting at page boundary. Reported-by: Jason Wang Signed-off-by: Michael S. Tsirkin --- drivers/vhost/vhost.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 94701ff3a23..159c77a5746 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -884,6 +884,7 @@ static int log_write(void __user *log_base, int r; if (!write_length) return 0; + write_length += write_address % VHOST_PAGE_SIZE; write_address /= VHOST_PAGE_SIZE; for (;;) { u64 base = (u64)(unsigned long)log_base; @@ -897,7 +898,7 @@ static int log_write(void __user *log_base, if (write_length <= VHOST_PAGE_SIZE) break; write_length -= VHOST_PAGE_SIZE; - write_address += VHOST_PAGE_SIZE; + write_address += 1; } return r; } -- cgit v1.2.3-70-g09d2 From 5478755616ae2ef1ce144dded589b62b2a50d575 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Mon, 29 Nov 2010 10:03:55 +0100 Subject: block: check for proper length of iov entries earlier in blk_rq_map_user_iov() commit 9284bcf checks for proper length of iov entries in blk_rq_map_user_iov(). But if the map is unaligned, kernel will break out the loop without checking for the proper length. So we need to check the proper length before the unalign check. Signed-off-by: Xiaotian Feng Cc: stable@kernel.org Signed-off-by: Jens Axboe --- block/blk-map.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/block/blk-map.c b/block/blk-map.c index 5d5dbe47c22..e663ac2d8e6 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -201,12 +201,13 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq, for (i = 0; i < iov_count; i++) { unsigned long uaddr = (unsigned long)iov[i].iov_base; + if (!iov[i].iov_len) + return -EINVAL; + if (uaddr & queue_dma_alignment(q)) { unaligned = 1; break; } - if (!iov[i].iov_len) - return -EINVAL; } if (unaligned || (q->dma_pad_mask & len) || map_data) -- cgit v1.2.3-70-g09d2 From 5a92bc88cef279261d3f138e25850c122df67045 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 29 Nov 2010 09:49:11 -0500 Subject: Btrfs: don't use migrate page without CONFIG_MIGRATION Fixes compile error Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 57c9d8eeb7d..33b6d459494 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -712,8 +712,11 @@ static int btree_migratepage(struct address_space *mapping, if (page_has_private(page) && !try_to_release_page(page, GFP_KERNEL)) return -EAGAIN; - +#ifdef CONFIG_MIGRATION return migrate_page(mapping, newpage, page); +#else + return -ENOSYS; +#endif } static int btree_writepage(struct page *page, struct writeback_control *wbc) @@ -821,7 +824,9 @@ static const struct address_space_operations btree_aops = { .releasepage = btree_releasepage, .invalidatepage = btree_invalidatepage, .sync_page = block_sync_page, +#ifdef CONFIG_MIGRATION .migratepage = btree_migratepage, +#endif }; int readahead_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize, -- cgit v1.2.3-70-g09d2 From 44266416f786514ec43a0d15ad951c34566b99c9 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 29 Nov 2010 18:46:22 +0300 Subject: ARM: cns3xxx: Fix build with CONFIG_PCI=y commit 6338a6aa7c082f11d55712251e14178c68bf5869 ("ARM: 6269/1: Add 'code' parameter for hook_fault_code()") breaks CNS3xxx build: CC arch/arm/mach-cns3xxx/pcie.o pcie.c: In function 'cns3xxx_pcie_init': pcie.c:373: warning: passing argument 4 of 'hook_fault_code' makes integer from pointer without a cast pcie.c:373: error: too few arguments to function 'hook_fault_code' This commit fixes the small issue. Cc: stable@kernel.org [36] Signed-off-by: Anton Vorontsov --- arch/arm/mach-cns3xxx/pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 38088c36936..78defd71a82 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void) { int i; - hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, + hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0, "imprecise external abort"); for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { -- cgit v1.2.3-70-g09d2 From d65c3768afb47fb93c43fbfcafef53502edaaa85 Mon Sep 17 00:00:00 2001 From: Simon Wood Date: Mon, 29 Nov 2010 17:41:23 +0100 Subject: HID: add support for F430 Force Feedback Wheel This patch adds USB IDs to enable force feedback on the Thrustmaster F430 wheel. Antonio did the work, I just converted to git patch to include in Kernel. Reported-by: Antonio Orefice Signed-off-by: Simon Wood Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 + drivers/hid/hid-tmff.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 7832b6e2478..7854a7988fc 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1386,6 +1386,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) }, { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) }, diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c index 15434c81479..25be4e1461b 100644 --- a/drivers/hid/hid-tmff.c +++ b/drivers/hid/hid-tmff.c @@ -256,6 +256,8 @@ static const struct hid_device_id tm_devices[] = { .driver_data = (unsigned long)ff_joystick }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654), /* FGT Force Feedback Wheel */ .driver_data = (unsigned long)ff_joystick }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a), /* F430 Force Feedback Wheel */ + .driver_data = (unsigned long)ff_joystick }, { } }; MODULE_DEVICE_TABLE(hid, tm_devices); -- cgit v1.2.3-70-g09d2 From a1dcfcb7f2d08717325157ed3c1db2362d6eb8c9 Mon Sep 17 00:00:00 2001 From: Toshiharu Okada Date: Sun, 21 Nov 2010 19:58:37 +0000 Subject: pch_gbe dreiver: chang author This driver's AUTHOR was changed to "Toshiharu Okada" from "Masayuki Ohtake". I update the Kconfig, renamed "Topcliff" to "EG20T". Signed-off-by: Toshiharu Okada Signed-off-by: David S. Miller --- drivers/net/Kconfig | 6 +++--- drivers/net/pch_gbe/pch_gbe_main.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f6668cdaac8..a445a0492c5 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2543,10 +2543,10 @@ config PCH_GBE depends on PCI select MII ---help--- - This is a gigabit ethernet driver for Topcliff PCH. - Topcliff PCH is the platform controller hub that is used in Intel's + This is a gigabit ethernet driver for EG20T PCH. + EG20T PCH is the platform controller hub that is used in Intel's general embedded platform. - Topcliff PCH has Gigabit Ethernet interface. + EG20T PCH has Gigabit Ethernet interface. Using this interface, it is able to access system devices connected to Gigabit Ethernet. This driver enables Gigabit Ethernet function. diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c index 472056b4744..03a1d280105 100644 --- a/drivers/net/pch_gbe/pch_gbe_main.c +++ b/drivers/net/pch_gbe/pch_gbe_main.c @@ -1,6 +1,6 @@ /* * Copyright (C) 1999 - 2010 Intel Corporation. - * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. + * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. * * This code was derived from the Intel e1000e Linux driver. * @@ -2464,8 +2464,8 @@ static void __exit pch_gbe_exit_module(void) module_init(pch_gbe_init_module); module_exit(pch_gbe_exit_module); -MODULE_DESCRIPTION("OKI semiconductor PCH Gigabit ethernet Driver"); -MODULE_AUTHOR("OKI semiconductor, "); +MODULE_DESCRIPTION("EG20T PCH Gigabit ethernet Driver"); +MODULE_AUTHOR("OKI SEMICONDUCTOR, "); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, pch_gbe_pcidev_id); -- cgit v1.2.3-70-g09d2 From 50a4205333c5e545551f1f82b3004ca635407c5c Mon Sep 17 00:00:00 2001 From: Toshiharu Okada Date: Mon, 29 Nov 2010 06:18:07 +0000 Subject: pch_gbe driver: The wrong of initializer entry The wrong of initializer entry was modified. Signed-off-by: Toshiharu Okada Reported-by: Dr. David Alan Gilbert Signed-off-by: David S. Miller --- drivers/net/pch_gbe/pch_gbe_param.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/pch_gbe/pch_gbe_param.c b/drivers/net/pch_gbe/pch_gbe_param.c index 2510146fc56..ef0996a0eaa 100644 --- a/drivers/net/pch_gbe/pch_gbe_param.c +++ b/drivers/net/pch_gbe/pch_gbe_param.c @@ -434,8 +434,8 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter) .err = "using default of " __MODULE_STRING(PCH_GBE_DEFAULT_TXD), .def = PCH_GBE_DEFAULT_TXD, - .arg = { .r = { .min = PCH_GBE_MIN_TXD } }, - .arg = { .r = { .max = PCH_GBE_MAX_TXD } } + .arg = { .r = { .min = PCH_GBE_MIN_TXD, + .max = PCH_GBE_MAX_TXD } } }; struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring; tx_ring->count = TxDescriptors; @@ -450,8 +450,8 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter) .err = "using default of " __MODULE_STRING(PCH_GBE_DEFAULT_RXD), .def = PCH_GBE_DEFAULT_RXD, - .arg = { .r = { .min = PCH_GBE_MIN_RXD } }, - .arg = { .r = { .max = PCH_GBE_MAX_RXD } } + .arg = { .r = { .min = PCH_GBE_MIN_RXD, + .max = PCH_GBE_MAX_RXD } } }; struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring; rx_ring->count = RxDescriptors; -- cgit v1.2.3-70-g09d2 From 25888e30319f8896fc656fc68643e6a078263060 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 25 Nov 2010 04:11:39 +0000 Subject: af_unix: limit recursion level MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Its easy to eat all kernel memory and trigger NMI watchdog, using an exploit program that queues unix sockets on top of others. lkml ref : http://lkml.org/lkml/2010/11/25/8 This mechanism is used in applications, one choice we have is to have a recursion limit. Other limits might be needed as well (if we queue other types of files), since the passfd mechanism is currently limited by socket receive queue sizes only. Add a recursion_level to unix socket, allowing up to 4 levels. Each time we send an unix socket through sendfd mechanism, we copy its recursion level (plus one) to receiver. This recursion level is cleared when socket receive queue is emptied. Reported-by: Марк Коренберг Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/af_unix.h | 2 ++ net/unix/af_unix.c | 37 ++++++++++++++++++++++++++++++++----- net/unix/garbage.c | 2 +- 3 files changed, 35 insertions(+), 6 deletions(-) diff --git a/include/net/af_unix.h b/include/net/af_unix.h index 90c9e2872f2..18e5c3f6758 100644 --- a/include/net/af_unix.h +++ b/include/net/af_unix.h @@ -10,6 +10,7 @@ extern void unix_inflight(struct file *fp); extern void unix_notinflight(struct file *fp); extern void unix_gc(void); extern void wait_for_unix_gc(void); +extern struct sock *unix_get_socket(struct file *filp); #define UNIX_HASH_SIZE 256 @@ -56,6 +57,7 @@ struct unix_sock { spinlock_t lock; unsigned int gc_candidate : 1; unsigned int gc_maybe_cycle : 1; + unsigned char recursion_level; struct socket_wq peer_wq; }; #define unix_sk(__sk) ((struct unix_sock *)__sk) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 3c95304a081..2268e679812 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1343,9 +1343,25 @@ static void unix_destruct_scm(struct sk_buff *skb) sock_wfree(skb); } +#define MAX_RECURSION_LEVEL 4 + static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb) { int i; + unsigned char max_level = 0; + int unix_sock_count = 0; + + for (i = scm->fp->count - 1; i >= 0; i--) { + struct sock *sk = unix_get_socket(scm->fp->fp[i]); + + if (sk) { + unix_sock_count++; + max_level = max(max_level, + unix_sk(sk)->recursion_level); + } + } + if (unlikely(max_level > MAX_RECURSION_LEVEL)) + return -ETOOMANYREFS; /* * Need to duplicate file references for the sake of garbage @@ -1356,9 +1372,11 @@ static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb) if (!UNIXCB(skb).fp) return -ENOMEM; - for (i = scm->fp->count-1; i >= 0; i--) - unix_inflight(scm->fp->fp[i]); - return 0; + if (unix_sock_count) { + for (i = scm->fp->count - 1; i >= 0; i--) + unix_inflight(scm->fp->fp[i]); + } + return max_level; } static int unix_scm_to_skb(struct scm_cookie *scm, struct sk_buff *skb, bool send_fds) @@ -1393,6 +1411,7 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock, struct sk_buff *skb; long timeo; struct scm_cookie tmp_scm; + int max_level; if (NULL == siocb->scm) siocb->scm = &tmp_scm; @@ -1431,8 +1450,9 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock, goto out; err = unix_scm_to_skb(siocb->scm, skb, true); - if (err) + if (err < 0) goto out_free; + max_level = err + 1; unix_get_secdata(siocb->scm, skb); skb_reset_transport_header(skb); @@ -1514,6 +1534,8 @@ restart: if (sock_flag(other, SOCK_RCVTSTAMP)) __net_timestamp(skb); skb_queue_tail(&other->sk_receive_queue, skb); + if (max_level > unix_sk(other)->recursion_level) + unix_sk(other)->recursion_level = max_level; unix_state_unlock(other); other->sk_data_ready(other, len); sock_put(other); @@ -1544,6 +1566,7 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock, int sent = 0; struct scm_cookie tmp_scm; bool fds_sent = false; + int max_level; if (NULL == siocb->scm) siocb->scm = &tmp_scm; @@ -1607,10 +1630,11 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock, /* Only send the fds in the first buffer */ err = unix_scm_to_skb(siocb->scm, skb, !fds_sent); - if (err) { + if (err < 0) { kfree_skb(skb); goto out_err; } + max_level = err + 1; fds_sent = true; err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size); @@ -1626,6 +1650,8 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock, goto pipe_err_free; skb_queue_tail(&other->sk_receive_queue, skb); + if (max_level > unix_sk(other)->recursion_level) + unix_sk(other)->recursion_level = max_level; unix_state_unlock(other); other->sk_data_ready(other, size); sent += size; @@ -1845,6 +1871,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, unix_state_lock(sk); skb = skb_dequeue(&sk->sk_receive_queue); if (skb == NULL) { + unix_sk(sk)->recursion_level = 0; if (copied >= target) goto unlock; diff --git a/net/unix/garbage.c b/net/unix/garbage.c index 40df93d1cf3..f89f83bf828 100644 --- a/net/unix/garbage.c +++ b/net/unix/garbage.c @@ -96,7 +96,7 @@ static DECLARE_WAIT_QUEUE_HEAD(unix_gc_wait); unsigned int unix_tot_inflight; -static struct sock *unix_get_socket(struct file *filp) +struct sock *unix_get_socket(struct file *filp) { struct sock *u_sock = NULL; struct inode *inode = filp->f_path.dentry->d_inode; -- cgit v1.2.3-70-g09d2 From 523fb8c867650196bef830d5dd9315d9975a9b7e Mon Sep 17 00:00:00 2001 From: Suresh Jayaraman Date: Mon, 29 Nov 2010 22:39:47 +0530 Subject: cifs: trivial comment fix for cifs_invalidate_mapping Only the callers check whether the invalid_mapping flag is set and not cifs_invalidate_mapping(). Signed-off-by: Suresh Jayaraman Signed-off-by: Steve French --- fs/cifs/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index ff7d2995d25..669298f088d 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1670,7 +1670,9 @@ cifs_inode_needs_reval(struct inode *inode) return false; } -/* check invalid_mapping flag and zap the cache if it's set */ +/* + * Zap the cache. Called when invalid_mapping flag is set. + */ static void cifs_invalidate_mapping(struct inode *inode) { -- cgit v1.2.3-70-g09d2 From 5a8f1d4701a50bc2a1e112f6c8e7d30f63597eae Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 29 Nov 2010 17:39:10 +0800 Subject: ASoC: Fix compile error for nuc900-ac97.c Fix below compile error by add a missing ';'. CC sound/soc/nuc900/nuc900-ac97.o sound/soc/nuc900/nuc900-ac97.c:300: warning: initialization from incompatible pointer type sound/soc/nuc900/nuc900-ac97.c:301: warning: initialization from incompatible pointer type sound/soc/nuc900/nuc900-ac97.c:318: error: expected ',' or ';' before 'static' sound/soc/nuc900/nuc900-ac97.c:405: error: 'nuc900_ac97_drvprobe' undeclared here (not in a function) make[3]: *** [sound/soc/nuc900/nuc900-ac97.o] Error 1 make[2]: *** [sound/soc/nuc900] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/nuc900/nuc900-ac97.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c index e00e39dd657..4f056b4a102 100644 --- a/sound/soc/nuc900/nuc900-ac97.c +++ b/sound/soc/nuc900/nuc900-ac97.c @@ -313,7 +313,7 @@ static struct snd_soc_dai_driver nuc900_ac97_dai = { .channels_max = 2, }, .ops = &nuc900_ac97_dai_ops, -} +}; static int __devinit nuc900_ac97_drvprobe(struct platform_device *pdev) { -- cgit v1.2.3-70-g09d2 From e3edefbd4a9071daf388978355f69c37fbeae261 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 29 Nov 2010 17:40:05 +0800 Subject: ASoC: Fix prototype for nuc900_ac97_probe and nuc900_ac97_remove This patch fixes below compile warning: CC sound/soc/nuc900/nuc900-ac97.o sound/soc/nuc900/nuc900-ac97.c:300: warning: initialization from incompatible pointer type sound/soc/nuc900/nuc900-ac97.c:301: warning: initialization from incompatible pointer type Signed-off-by: Axel Lin Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/nuc900/nuc900-ac97.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c index 4f056b4a102..3d9d8b1636b 100644 --- a/sound/soc/nuc900/nuc900-ac97.c +++ b/sound/soc/nuc900/nuc900-ac97.c @@ -263,8 +263,7 @@ static int nuc900_ac97_trigger(struct snd_pcm_substream *substream, return ret; } -static int nuc900_ac97_probe(struct platform_device *pdev, - struct snd_soc_dai *dai) +static int nuc900_ac97_probe(struct snd_soc_dai *dai) { struct nuc900_audio *nuc900_audio = nuc900_ac97_data; unsigned long val; @@ -284,12 +283,12 @@ static int nuc900_ac97_probe(struct platform_device *pdev, return 0; } -static void nuc900_ac97_remove(struct platform_device *pdev, - struct snd_soc_dai *dai) +static int nuc900_ac97_remove(struct snd_soc_dai *dai) { struct nuc900_audio *nuc900_audio = nuc900_ac97_data; clk_disable(nuc900_audio->clk); + return 0; } static struct snd_soc_dai_ops nuc900_ac97_dai_ops = { -- cgit v1.2.3-70-g09d2 From a7a9820bae19775df1d6cc70d2571ee26e099413 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 29 Nov 2010 17:40:53 +0800 Subject: ASoC: Fix compile error for nuc900-pcm.c This patch fixes below error: CC sound/soc/nuc900/nuc900-pcm.o sound/soc/nuc900/nuc900-pcm.c: In function 'nuc900_dma_open': sound/soc/nuc900/nuc900-pcm.c:267: error: 'nuc900_ac97_data' undeclared (first use in this function) sound/soc/nuc900/nuc900-pcm.c:267: error: (Each undeclared identifier is reported only once sound/soc/nuc900/nuc900-pcm.c:267: error: for each function it appears in.) sound/soc/nuc900/nuc900-pcm.c: At top level: sound/soc/nuc900/nuc900-pcm.c:337: error: expected ',' or ';' before 'static' sound/soc/nuc900/nuc900-pcm.c:354: error: 'nuc900_soc_platform_probe' undeclared here (not in a function) make[3]: *** [sound/soc/nuc900/nuc900-pcm.o] Error 1 make[2]: *** [sound/soc/nuc900] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/nuc900/nuc900-audio.h | 2 ++ sound/soc/nuc900/nuc900-pcm.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/nuc900/nuc900-audio.h b/sound/soc/nuc900/nuc900-audio.h index aeed8ead2b2..59f7e8ed1a6 100644 --- a/sound/soc/nuc900/nuc900-audio.h +++ b/sound/soc/nuc900/nuc900-audio.h @@ -110,4 +110,6 @@ struct nuc900_audio { }; +extern struct nuc900_audio *nuc900_ac97_data; + #endif /*end _NUC900_AUDIO_H */ diff --git a/sound/soc/nuc900/nuc900-pcm.c b/sound/soc/nuc900/nuc900-pcm.c index 195d1ac9477..2245f8b8edc 100644 --- a/sound/soc/nuc900/nuc900-pcm.c +++ b/sound/soc/nuc900/nuc900-pcm.c @@ -332,7 +332,7 @@ static struct snd_soc_platform_driver nuc900_soc_platform = { .ops = &nuc900_dma_ops, .pcm_new = nuc900_dma_new, .pcm_free = nuc900_dma_free_dma_buffers, -} +}; static int __devinit nuc900_soc_platform_probe(struct platform_device *pdev) { -- cgit v1.2.3-70-g09d2 From 3f90e5028a03be4496a04e4599b16f4420ff1304 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 29 Nov 2010 17:43:39 +0800 Subject: ASoC: Remove unneeded !! operations while checking return value of nuc900_checkready I think this unneededd !! operations just reduce the readability. Signed-off-by: Axel Lin Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/nuc900/nuc900-ac97.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c index 3d9d8b1636b..dac6732da96 100644 --- a/sound/soc/nuc900/nuc900-ac97.c +++ b/sound/soc/nuc900/nuc900-ac97.c @@ -49,7 +49,7 @@ static unsigned short nuc900_ac97_read(struct snd_ac97 *ac97, mutex_lock(&ac97_mutex); val = nuc900_checkready(); - if (!!val) { + if (val) { dev_err(nuc900_audio->dev, "AC97 codec is not ready\n"); goto out; } @@ -102,7 +102,7 @@ static void nuc900_ac97_write(struct snd_ac97 *ac97, unsigned short reg, mutex_lock(&ac97_mutex); tmp = nuc900_checkready(); - if (!!tmp) + if (tmp) dev_err(nuc900_audio->dev, "AC97 codec is not ready\n"); /* clear the R_WB bit and write register index */ @@ -149,7 +149,7 @@ static void nuc900_ac97_warm_reset(struct snd_ac97 *ac97) udelay(100); val = nuc900_checkready(); - if (!!val) + if (val) dev_err(nuc900_audio->dev, "AC97 codec is not ready\n"); mutex_unlock(&ac97_mutex); -- cgit v1.2.3-70-g09d2 From 67bd489aa309a680b1462ad635df29e8825152d2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 29 Nov 2010 14:54:58 +0800 Subject: ASoC: Add missing dev_set_drvdata in mpc8610_hpcd_probe Otherwise, calling dev_get_drvdata in mpc8610_hpcd_remove returns NULL. Signed-off-by: Axel Lin Acked-by: Timur Tabi Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/fsl/mpc8610_hpcd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index 0d7dcf1e486..7d7847a1e66 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -498,6 +498,7 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) dev_err(&pdev->dev, "platform device add failed\n"); goto error; } + dev_set_drvdata(&pdev->dev, sound_device); of_node_put(codec_np); -- cgit v1.2.3-70-g09d2 From 39a545559f8d5f13e8a4a7dfddcaad0e2ba9bcfb Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 29 Nov 2010 14:55:58 +0800 Subject: ASoC: Add missing dev_set_drvdata in p1022_ds_probe Otherwise, calling dev_get_drvdata in p1022_ds_remove returns NULL. Signed-off-by: Axel Lin Acked-by: Timur Tabi Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/fsl/p1022_ds.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c index 63b9eaa1ebc..026b756961e 100644 --- a/sound/soc/fsl/p1022_ds.c +++ b/sound/soc/fsl/p1022_ds.c @@ -498,6 +498,7 @@ static int p1022_ds_probe(struct platform_device *pdev) dev_err(&pdev->dev, "platform device add failed\n"); goto error; } + dev_set_drvdata(&pdev->dev, sound_device); of_node_put(codec_np); -- cgit v1.2.3-70-g09d2 From c5d1b51d3559664920136b45f4d2366ed9a9e8be Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 29 Nov 2010 18:00:23 +0000 Subject: drm/i915: Clear pfit registers when not used by any outputs ... otherwise the panel-fitter may be left enabled with random settings and cause unintended filtering (i.e. blurring of native modes on external panels). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31942 Reported-and-tested-by: Ben Kohler Tested-by: Ciprian Docan Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 7 ++++++- drivers/gpu/drm/i915/intel_drv.h | 2 +- drivers/gpu/drm/i915/intel_lvds.c | 19 ++++++++++--------- 3 files changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bee24b1a58e..255b52ee009 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5336,9 +5336,14 @@ static void intel_setup_outputs(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *encoder; bool dpd_is_edp = false; + bool has_lvds = false; if (IS_MOBILE(dev) && !IS_I830(dev)) - intel_lvds_init(dev); + has_lvds = intel_lvds_init(dev); + if (!has_lvds && !HAS_PCH_SPLIT(dev)) { + /* disable the panel fitter on everything but LVDS */ + I915_WRITE(PFIT_CONTROL, 0); + } if (HAS_PCH_SPLIT(dev)) { dpd_is_edp = intel_dpd_is_edp(dev); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 21551fe7454..e52c6125bb1 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -237,7 +237,7 @@ extern bool intel_sdvo_init(struct drm_device *dev, int output_device); extern void intel_dvo_init(struct drm_device *dev); extern void intel_tv_init(struct drm_device *dev); extern void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj); -extern void intel_lvds_init(struct drm_device *dev); +extern bool intel_lvds_init(struct drm_device *dev); extern void intel_dp_init(struct drm_device *dev, int dp_reg); void intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 4324a326f98..f79327fc665 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -837,7 +837,7 @@ static bool intel_lvds_ddc_probe(struct drm_device *dev, u8 pin) * Create the connector, register the LVDS DDC bus, and try to figure out what * modes we can display on the LVDS panel (if present). */ -void intel_lvds_init(struct drm_device *dev) +bool intel_lvds_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_lvds *intel_lvds; @@ -853,37 +853,37 @@ void intel_lvds_init(struct drm_device *dev) /* Skip init on machines we know falsely report LVDS */ if (dmi_check_system(intel_no_lvds)) - return; + return false; pin = GMBUS_PORT_PANEL; if (!lvds_is_present_in_vbt(dev, &pin)) { DRM_DEBUG_KMS("LVDS is not present in VBT\n"); - return; + return false; } if (HAS_PCH_SPLIT(dev)) { if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0) - return; + return false; if (dev_priv->edp.support) { DRM_DEBUG_KMS("disable LVDS for eDP support\n"); - return; + return false; } } if (!intel_lvds_ddc_probe(dev, pin)) { DRM_DEBUG_KMS("LVDS did not respond to DDC probe\n"); - return; + return false; } intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL); if (!intel_lvds) { - return; + return false; } intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL); if (!intel_connector) { kfree(intel_lvds); - return; + return false; } if (!HAS_PCH_SPLIT(dev)) { @@ -1026,7 +1026,7 @@ out: /* keep the LVDS connector */ dev_priv->int_lvds_connector = connector; drm_sysfs_connector_add(connector); - return; + return true; failed: DRM_DEBUG_KMS("No LVDS modes found, disabling.\n"); @@ -1034,4 +1034,5 @@ failed: drm_encoder_cleanup(encoder); kfree(intel_lvds); kfree(intel_connector); + return false; } -- cgit v1.2.3-70-g09d2 From 6df78338e7af7960b67fa00aa2a5c63986a23d3c Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sat, 20 Nov 2010 12:07:16 +0100 Subject: staging: brcm80211: updated maintainers contact information Open-source development team extended so contacts updated. Reviewed-by: Brett Rudley Signed-off-by: Arend van Spriel Signed-off-by: Greg Kroah-Hartman --- drivers/staging/brcm80211/README | 8 +++++--- drivers/staging/brcm80211/TODO | 2 ++ 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/staging/brcm80211/README b/drivers/staging/brcm80211/README index c8f1cf1b440..a27bb0b4f58 100644 --- a/drivers/staging/brcm80211/README +++ b/drivers/staging/brcm80211/README @@ -88,7 +88,9 @@ with the driver. Contact Info: ============= -Brett Rudley brudley@broadcom.com -Henry Ptasinski henryp@broadcom.com -Dowan Kim dowan@broadcom.com +Brett Rudley brudley@broadcom.com +Henry Ptasinski henryp@broadcom.com +Dowan Kim dowan@broadcom.com +Roland Vossen rvossen@broadcom.com +Arend van Spriel arend@broadcom.com diff --git a/drivers/staging/brcm80211/TODO b/drivers/staging/brcm80211/TODO index dbf90418489..24ebadbe424 100644 --- a/drivers/staging/brcm80211/TODO +++ b/drivers/staging/brcm80211/TODO @@ -46,4 +46,6 @@ Contact Brett Rudley Henry Ptasinski Dowan Kim +Roland Vossen +Arend van Spriel -- cgit v1.2.3-70-g09d2 From 9ee898739b7e4d292abed911008b3f91b442118a Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Mon, 22 Nov 2010 12:34:50 +0100 Subject: Staging: batman-adv: Don't remove interface with spinlock held We call a lot of the netdevice code when holding if_list_lock which will spin the whole time. This is not necessary because we only want to protect the access to the list to be serialized. An extra queue can be used which hold all interfaces which should be removed and then use that queue without any locks for netdevice cleanup. We create a "scheduling while atomic" Oops when calling different netdevice related functions inside a spinlock protected area on a preemtible kernel. Reported-by: Rafal Lesniak Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman --- drivers/staging/batman-adv/hard-interface.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/staging/batman-adv/hard-interface.c b/drivers/staging/batman-adv/hard-interface.c index b68a7e5173b..d85de82f941 100644 --- a/drivers/staging/batman-adv/hard-interface.c +++ b/drivers/staging/batman-adv/hard-interface.c @@ -463,9 +463,6 @@ static void hardif_remove_interface(struct batman_if *batman_if) return; batman_if->if_status = IF_TO_BE_REMOVED; - - /* caller must take if_list_lock */ - list_del_rcu(&batman_if->list); synchronize_rcu(); sysfs_del_hardif(&batman_if->hardif_obj); hardif_put(batman_if); @@ -474,13 +471,21 @@ static void hardif_remove_interface(struct batman_if *batman_if) void hardif_remove_interfaces(void) { struct batman_if *batman_if, *batman_if_tmp; + struct list_head if_queue; + + INIT_LIST_HEAD(&if_queue); - rtnl_lock(); spin_lock(&if_list_lock); list_for_each_entry_safe(batman_if, batman_if_tmp, &if_list, list) { - hardif_remove_interface(batman_if); + list_del_rcu(&batman_if->list); + list_add_tail(&batman_if->list, &if_queue); } spin_unlock(&if_list_lock); + + rtnl_lock(); + list_for_each_entry_safe(batman_if, batman_if_tmp, &if_queue, list) { + hardif_remove_interface(batman_if); + } rtnl_unlock(); } @@ -507,8 +512,10 @@ static int hard_if_event(struct notifier_block *this, break; case NETDEV_UNREGISTER: spin_lock(&if_list_lock); - hardif_remove_interface(batman_if); + list_del_rcu(&batman_if->list); spin_unlock(&if_list_lock); + + hardif_remove_interface(batman_if); break; case NETDEV_CHANGEMTU: if (batman_if->soft_iface) -- cgit v1.2.3-70-g09d2 From b6faaae1a15a352d68b3e3cd8b840e56709820bf Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Mon, 22 Nov 2010 12:34:49 +0100 Subject: Staging: batman-adv: ensure that eth_type_trans gets linear memory eth_type_trans tries to pull data with the length of the ethernet header from the skb. We only ensured that enough data for the first ethernet header and the batman header is available in non-paged memory of the skb and not for the ethernet after the batman header. eth_type_trans would fail sometimes with drivers which don't ensure that all there data is perfectly linearised. The failure was noticed through a kernel bug Oops generated by the skb_pull inside eth_type_trans. Reported-by: Rafal Lesniak Signed-off-by: Marek Lindner Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman --- drivers/staging/batman-adv/soft-interface.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/staging/batman-adv/soft-interface.c b/drivers/staging/batman-adv/soft-interface.c index 3904db9ce7b..0e996181daf 100644 --- a/drivers/staging/batman-adv/soft-interface.c +++ b/drivers/staging/batman-adv/soft-interface.c @@ -194,14 +194,15 @@ void interface_rx(struct net_device *soft_iface, struct bat_priv *priv = netdev_priv(soft_iface); /* check if enough space is available for pulling, and pull */ - if (!pskb_may_pull(skb, hdr_size)) { - kfree_skb(skb); - return; - } + if (!pskb_may_pull(skb, hdr_size)) + goto dropped; + skb_pull_rcsum(skb, hdr_size); /* skb_set_mac_header(skb, -sizeof(struct ethhdr));*/ /* skb->dev & skb->pkt_type are set here */ + if (unlikely(!pskb_may_pull(skb, ETH_HLEN))) + goto dropped; skb->protocol = eth_type_trans(skb, soft_iface); /* should not be neccesary anymore as we use skb_pull_rcsum() @@ -216,6 +217,11 @@ void interface_rx(struct net_device *soft_iface, soft_iface->last_rx = jiffies; netif_rx(skb); + return; + +dropped: + kfree_skb(skb); + return; } #ifdef HAVE_NET_DEVICE_OPS -- cgit v1.2.3-70-g09d2 From 72f9fc7c8150873d51c61cfb885dc7fbb075d62a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 22 Nov 2010 12:12:37 -0800 Subject: staging: easycap needs smp_lock.h, fixes build error Add header file to fix build error: drivers/staging/easycap/easycap_main.c:4251: error: implicit declaration of function 'lock_kernel' drivers/staging/easycap/easycap_main.c:4254: error: implicit declaration of function 'unlock_kernel' Signed-off-by: Randy Dunlap Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman --- drivers/staging/easycap/easycap.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/easycap/easycap.h b/drivers/staging/easycap/easycap.h index 25961c23dc0..884263b2775 100644 --- a/drivers/staging/easycap/easycap.h +++ b/drivers/staging/easycap/easycap.h @@ -75,6 +75,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 517ff43146b17a0d067125f098f675d1e0ac2d82 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 24 Nov 2010 16:00:49 +0000 Subject: libertas: fix memory corruption in lbs_remove_card() "priv" is stored at the end of the wiphy structure, which is freed during the call to lbs_cfg_free(). It must not be touched afterwards. Remove the unnecessary NULL assignment causing this memory corruption. Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/main.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 46b88b118c9..fcd1bbfc632 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -915,8 +915,6 @@ void lbs_remove_card(struct lbs_private *priv) lbs_free_adapter(priv); lbs_cfg_free(priv); - - priv->dev = NULL; free_netdev(dev); lbs_deb_leave(LBS_DEB_MAIN); -- cgit v1.2.3-70-g09d2 From 16ccdf0dbc84b11bc8b7fdbad66804d06a683554 Mon Sep 17 00:00:00 2001 From: Sven Neumann Date: Wed, 24 Nov 2010 16:02:00 +0000 Subject: libertas: fix invalid access card->priv must not be accessed after lbs_remove_card() was called as lbs_remove_card() frees card->priv via free_netdev(). For libertas_sdio this is a regression introduced by 23b149c1890f9. The correct fix to the issue described there is simply to remove the assignment. This flag is set at the appropriate time inside lbs_remove_card anyway. Reported-by: Daniel Drake Signed-off-by: Sven Neumann Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_sdio.c | 1 - drivers/net/wireless/libertas/if_spi.c | 1 - 2 files changed, 2 deletions(-) diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index e5685dc317a..b4de0ca10fe 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -1170,7 +1170,6 @@ static void if_sdio_remove(struct sdio_func *func) lbs_deb_sdio("call remove card\n"); lbs_stop_card(card->priv); lbs_remove_card(card->priv); - card->priv->surpriseremoved = 1; flush_workqueue(card->workqueue); destroy_workqueue(card->workqueue); diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index 79bcb4e5d2c..ecd4d04b2c3 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -1055,7 +1055,6 @@ static int __devexit libertas_spi_remove(struct spi_device *spi) lbs_stop_card(priv); lbs_remove_card(priv); /* will call free_netdev */ - priv->surpriseremoved = 1; free_irq(spi->irq, card); if_spi_terminate_spi_thread(card); if (card->pdata->teardown) -- cgit v1.2.3-70-g09d2 From 98c316e348bedffa730e6f1e4baeb8a3c3e0f28b Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 25 Nov 2010 18:26:07 +0100 Subject: ath9k: use per-device struct for pm_qos_* operations The ath9k driver uses a shared pm_qos_request_list structure for all devices. This causes the following warning if more than one device is present in the system: WARNING: at kernel/pm_qos_params.c:234 ath9k_init_device+0x5e8/0x6b0() pm_qos_add_request() called for already added request Modules linked in: Call Trace: [<802b1cdc>] dump_stack+0x8/0x34 [<8007dd90>] warn_slowpath_common+0x78/0xa4 [<8007de44>] warn_slowpath_fmt+0x2c/0x38 [<801b0828>] ath9k_init_device+0x5e8/0x6b0 [<801bc508>] ath_pci_probe+0x2dc/0x39c [<80176254>] pci_device_probe+0x64/0xa4 [<8019471c>] driver_probe_device+0xbc/0x188 [<80194854>] __driver_attach+0x6c/0xa4 [<80193e20>] bus_for_each_dev+0x60/0xb0 [<80193580>] bus_add_driver+0xcc/0x268 [<80194c08>] driver_register+0xe0/0x198 [<801764e0>] __pci_register_driver+0x50/0xe0 [<80365f48>] ath9k_init+0x3c/0x6c [<8006050c>] do_one_initcall+0xfc/0x1d8 [<80355340>] kernel_init+0xd4/0x174 [<800639a4>] kernel_thread_helper+0x10/0x18 ---[ end trace 5345fc6f870564a6 ]--- This patch fixes that warning by using a separate pm_qos_request_list sructure for each device. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 4 +++- drivers/net/wireless/ath/ath9k/init.c | 7 ++----- drivers/net/wireless/ath/ath9k/main.c | 5 ++--- 3 files changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 170d44a35cc..0d0bec3628e 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -21,6 +21,7 @@ #include #include #include +#include #include "debug.h" #include "common.h" @@ -646,6 +647,8 @@ struct ath_softc { struct ath_descdma txsdma; struct ath_ant_comb ant_comb; + + struct pm_qos_request_list pm_qos_req; }; struct ath_wiphy { @@ -675,7 +678,6 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz) } extern struct ieee80211_ops ath9k_ops; -extern struct pm_qos_request_list ath9k_pm_qos_req; extern int modparam_nohwcrypt; extern int led_blink; diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 92bc5c5f487..c29eea26a77 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -15,7 +15,6 @@ */ #include -#include #include "ath9k.h" @@ -180,8 +179,6 @@ static const struct ath_ops ath9k_common_ops = { .write = ath9k_iowrite32, }; -struct pm_qos_request_list ath9k_pm_qos_req; - /**************************/ /* Initialization */ /**************************/ @@ -759,7 +756,7 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid, ath_init_leds(sc); ath_start_rfkill_poll(sc); - pm_qos_add_request(&ath9k_pm_qos_req, PM_QOS_CPU_DMA_LATENCY, + pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE); return 0; @@ -830,7 +827,7 @@ void ath9k_deinit_device(struct ath_softc *sc) } ieee80211_unregister_hw(hw); - pm_qos_remove_request(&ath9k_pm_qos_req); + pm_qos_remove_request(&sc->pm_qos_req); ath_rx_cleanup(sc); ath_tx_cleanup(sc); ath9k_deinit_softc(sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 25d3ef4c338..1cdbdbe33ab 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -15,7 +15,6 @@ */ #include -#include #include "ath9k.h" #include "btcoex.h" @@ -1244,7 +1243,7 @@ static int ath9k_start(struct ieee80211_hw *hw) ath9k_btcoex_timer_resume(sc); } - pm_qos_update_request(&ath9k_pm_qos_req, 55); + pm_qos_update_request(&sc->pm_qos_req, 55); mutex_unlock: mutex_unlock(&sc->mutex); @@ -1423,7 +1422,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) sc->sc_flags |= SC_OP_INVALID; - pm_qos_update_request(&ath9k_pm_qos_req, PM_QOS_DEFAULT_VALUE); + pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE); mutex_unlock(&sc->mutex); -- cgit v1.2.3-70-g09d2 From c426ee247e40a70490f3d67d3c9c7d1aba54516f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Nov 2010 11:38:04 +0100 Subject: ath9k/carl9170: advertise P2P With some upcoming changes we'd like to use the interface types for P2P capability tests. Enable them now so that when we add those tests in wpa_supplicant, nothing will break. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 2 ++ drivers/net/wireless/ath/carl9170/fw.c | 3 ++- drivers/net/wireless/ath/carl9170/main.c | 3 ++- 3 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index c29eea26a77..14b8ab386da 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -661,6 +661,8 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->flags |= IEEE80211_HW_MFP_CAPABLE; hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_P2P_GO) | + BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_WDS) | BIT(NL80211_IFTYPE_STATION) | diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c index ae6c006bbc5..546b4e4ec5e 100644 --- a/drivers/net/wireless/ath/carl9170/fw.c +++ b/drivers/net/wireless/ath/carl9170/fw.c @@ -291,7 +291,8 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len) if (SUPP(CARL9170FW_WLANTX_CAB)) { ar->hw->wiphy->interface_modes |= - BIT(NL80211_IFTYPE_AP); + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_P2P_GO); } } diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index a314c2c2bfb..dc7b30b170d 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1631,7 +1631,8 @@ void *carl9170_alloc(size_t priv_size) * supports these modes. The code which will add the * additional interface_modes is in fw.c. */ - hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_P2P_CLIENT); hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_REPORTS_TX_ACK_STATUS | -- cgit v1.2.3-70-g09d2 From 46047784b8cdcfc916f6c1cccee0c18dd1223dfd Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 26 Nov 2010 23:24:31 +0530 Subject: ath9k: Disable SWBA interrupt on remove_interface while removing beaconing mode interface, SWBA interrupt was never disabled when there are no other beaconing interfaces. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 1cdbdbe33ab..dace215b693 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1519,6 +1519,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, struct ath_softc *sc = aphy->sc; struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_vif *avp = (void *)vif->drv_priv; + bool bs_valid = false; int i; ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n"); @@ -1547,7 +1548,15 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, "slot\n", __func__); sc->beacon.bslot[i] = NULL; sc->beacon.bslot_aphy[i] = NULL; - } + } else if (sc->beacon.bslot[i]) + bs_valid = true; + } + if (!bs_valid && (sc->sc_ah->imask & ATH9K_INT_SWBA)) { + /* Disable SWBA interrupt */ + sc->sc_ah->imask &= ~ATH9K_INT_SWBA; + ath9k_ps_wakeup(sc); + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask); + ath9k_ps_restore(sc); } sc->nvifs--; -- cgit v1.2.3-70-g09d2 From 7dff3125534c1d035a910052335a3a39fbb31aa7 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Fri, 26 Nov 2010 20:41:55 +0200 Subject: mac80211: Fix frame injection using non-AP vif In order for frame injection to work properly for some use cases (e.g., finding the station entry and keys for encryption), mac80211 needs to find the correct sdata entry. This works when the main vif is in AP mode, but commit a2c1e3dad516618cb0fbfb1a62c36d0b0744573a broke this particular use case for station main vif. While this type of injection is quite unusual operation, it has some uses and we should fix it. Do this by changing the monitor vif sdata selection to allow station vif to be selected instead of limiting it to just AP vifs. We still need to skip some iftypes to avoid selecting unsuitable vif for injection. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/mac80211/tx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 96c59430950..df6aac52353 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1587,7 +1587,12 @@ static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, list) { if (!ieee80211_sdata_running(tmp_sdata)) continue; - if (tmp_sdata->vif.type != NL80211_IFTYPE_AP) + if (tmp_sdata->vif.type == + NL80211_IFTYPE_MONITOR || + tmp_sdata->vif.type == + NL80211_IFTYPE_AP_VLAN || + tmp_sdata->vif.type == + NL80211_IFTYPE_WDS) continue; if (compare_ether_addr(tmp_sdata->vif.addr, hdr->addr2) == 0) { -- cgit v1.2.3-70-g09d2 From 5c5e138b590a748c57d54b39634cda974ab9af1d Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 26 Nov 2010 23:29:23 +0100 Subject: carl9170: fix carl9170_tx_prepare typo commit: "carl9170: revamp carl9170_tx_prepare" introduced a peculiar bug that would only show up if the the module parameter noht is set to 1. Then all outbound voice, video and background frames would each invoke a (bogus) RTS/CTS handshake. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index b575c865142..7e6506a77bb 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -810,7 +810,7 @@ static int carl9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb) mac_tmp = cpu_to_le16(AR9170_TX_MAC_HW_DURATION | AR9170_TX_MAC_BACKOFF); - mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) && + mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) & AR9170_TX_MAC_QOS); no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK); -- cgit v1.2.3-70-g09d2 From 251d380034c6c34efe75ffb89d863558ba68ec6a Mon Sep 17 00:00:00 2001 From: John Tapsell Date: Thu, 25 Mar 2010 13:30:45 +0000 Subject: Staging: rt2870: Add USB ID for Buffalo Airstation WLI-UC-GN BugLink: http://bugs.launchpad.net/bugs/441990 This was tested to successfully enable the hardware. Signed-off-by: John Tapsell Signed-off-by: Stefan Bader CC: stable@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2860/usb_main_dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c index ddacfc6c486..cd15daae541 100644 --- a/drivers/staging/rt2860/usb_main_dev.c +++ b/drivers/staging/rt2860/usb_main_dev.c @@ -182,6 +182,7 @@ struct usb_device_id rtusb_usb_id[] = { {USB_DEVICE(0x2001, 0x3C09)}, /* D-Link */ {USB_DEVICE(0x2001, 0x3C0A)}, /* D-Link 3072 */ {USB_DEVICE(0x2019, 0xED14)}, /* Planex Communications, Inc. */ + {USB_DEVICE(0x0411, 0x015D)}, /* Buffalo Airstation WLI-UC-GN */ {} /* Terminating entry */ }; -- cgit v1.2.3-70-g09d2 From 31e323cca9d5c8afd372976c35a5d46192f540d1 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 29 Nov 2010 14:16:53 -0800 Subject: xen: don't bother to stop other cpus on shutdown/reboot Xen will shoot all the VCPUs when we do a shutdown hypercall, so there's no need to do it manually. In any case it will fail because all the IPI irqs have been pulled down by this point, so the cross-CPU calls will simply hang forever. Until change 76fac077db6b34e2c6383a7b4f3f4f7b7d06d8ce the function calls were not synchronously waited for, so this wasn't apparent. However after that change the calls became synchronous leading to a hang on shutdown on multi-VCPU guests. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel Cc: Alok Kataria --- arch/x86/xen/enlighten.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 235c0f4d386..4a5973abefc 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1016,10 +1016,6 @@ static void xen_reboot(int reason) { struct sched_shutdown r = { .reason = reason }; -#ifdef CONFIG_SMP - stop_other_cpus(); -#endif - if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r)) BUG(); } -- cgit v1.2.3-70-g09d2 From 3f0d3d016d89a5efb8b926d4707eb21fa13f3d27 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 21 Oct 2010 17:42:40 -0400 Subject: tpm: Autodetect itpm devices Some Lenovos have TPMs that require a quirk to function correctly. This can be autodetected by checking whether the device has a _HID of INTC0102. This is an invalid PNPid, and as such is discarded by the pnp layer - however it's still present in the ACPI code, so we can pull it out that way. This means that the quirk won't be automatically applied on non-ACPI systems, but without ACPI we don't have any way to identify the chip anyway so I don't think that's a great concern. Signed-off-by: Matthew Garrett Acked-by: Rajiv Andrade Tested-by: Jiri Kosina Tested-by: Andy Isaacson Signed-off-by: James Morris --- drivers/char/tpm/tpm_tis.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 1030f842013..c17a305ecb2 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -25,6 +25,7 @@ #include #include #include +#include #include "tpm.h" #define TPM_HEADER_SIZE 10 @@ -78,6 +79,26 @@ enum tis_defaults { static LIST_HEAD(tis_chips); static DEFINE_SPINLOCK(tis_lock); +#ifdef CONFIG_ACPI +static int is_itpm(struct pnp_dev *dev) +{ + struct acpi_device *acpi = pnp_acpi_device(dev); + struct acpi_hardware_id *id; + + list_for_each_entry(id, &acpi->pnp.ids, list) { + if (!strcmp("INTC0102", id->id)) + return 1; + } + + return 0; +} +#else +static int is_itpm(struct pnp_dev *dev) +{ + return 0; +} +#endif + static int check_locality(struct tpm_chip *chip, int l) { if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) & @@ -472,6 +493,9 @@ static int tpm_tis_init(struct device *dev, resource_size_t start, "1.2 TPM (device-id 0x%X, rev-id %d)\n", vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0))); + if (is_itpm(to_pnp_dev(dev))) + itpm = 1; + if (itpm) dev_info(dev, "Intel iTPM workaround enabled\n"); -- cgit v1.2.3-70-g09d2 From 7f90cfc505d613f4faf096e0d84ffe99208057d9 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 25 Nov 2010 00:27:54 +0100 Subject: TTY: ldisc, fix open flag handling When a concrete ldisc open fails in tty_ldisc_open, we forget to clear TTY_LDISC_OPEN. This causes a false warning on the next ldisc open: WARNING: at drivers/char/tty_ldisc.c:445 tty_ldisc_open+0x26/0x38() Hardware name: System Product Name Modules linked in: ... Pid: 5251, comm: a.out Tainted: G W 2.6.32-5-686 #1 Call Trace: [] ? warn_slowpath_common+0x5e/0x8a [] ? warn_slowpath_null+0xa/0xc [] ? tty_ldisc_open+0x26/0x38 [] ? tty_set_ldisc+0x218/0x304 ... So clear the bit when failing... Introduced in c65c9bc3efa (tty: rewrite the ldisc locking) back in 2.6.31-rc1. Signed-off-by: Jiri Slaby Cc: Alan Cox Reported-by: Sergey Lapin Tested-by: Sergey Lapin Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ldisc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index d8e96b00502..4214d58276f 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -454,6 +454,8 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) /* BTM here locks versus a hangup event */ WARN_ON(!tty_locked()); ret = ld->ops->open(tty); + if (ret) + clear_bit(TTY_LDISC_OPEN, &tty->flags); return ret; } return 0; -- cgit v1.2.3-70-g09d2 From 6a20bd45fda271bd57e3ba41b3de3009797f4b5e Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 25 Nov 2010 00:27:55 +0100 Subject: NET: wan/x25, fix ldisc->open retval We should never return positive values from ldisc->open, tty layer doesn't (and never did) expect that. If we do that, weird things like warnings in tty_ldisc_close happen. Not sure if dev->base_addr is used somehow now. Signed-off-by: Jiri Slaby Cc: Alan Cox Cc: Andrew Hendry Cc: linux-x25@vger.kernel.org Tested-by: Sergey Lapin Signed-off-by: Greg Kroah-Hartman --- drivers/net/wan/x25_asy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index d81ad839788..66cda25aaa2 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -582,7 +582,7 @@ static int x25_asy_open_tty(struct tty_struct *tty) if (err) return err; /* Done. We have linked the TTY line to a channel. */ - return sl->dev->base_addr; + return 0; } -- cgit v1.2.3-70-g09d2 From e2efafbf139d2bfdfe96f2901f03189fecd172e4 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 29 Nov 2010 10:16:53 +0100 Subject: TTY: don't allow reopen when ldisc is changing There are many WARNINGs like the following reported nowadays: WARNING: at drivers/tty/tty_io.c:1331 tty_open+0x2a2/0x49a() Hardware name: Latitude E6500 Modules linked in: Pid: 1207, comm: plymouthd Not tainted 2.6.37-rc3-mmotm1123 #3 Call Trace: [] warn_slowpath_common+0x80/0x98 [] warn_slowpath_null+0x15/0x17 [] tty_open+0x2a2/0x49a [] chrdev_open+0x11d/0x146 ... This means tty_reopen is called without TTY_LDISC set. For further considerations, note tty_lock is held in tty_open. TTY_LDISC is cleared in: 1) __tty_hangup from tty_ldisc_hangup to tty_ldisc_enable. During this section tty_lock is held. However tty_lock is temporarily dropped in the middle of the function by tty_ldisc_hangup. 2) tty_release via tty_ldisc_release till the end of tty existence. If tty->count <= 1, tty_lock is taken, TTY_CLOSING bit set and then tty_ldisc_release called. tty_reopen checks TTY_CLOSING before checking TTY_LDISC. 3) tty_set_ldisc from tty_ldisc_halt to tty_ldisc_enable. We: * take tty_lock, set TTY_LDISC_CHANGING, put tty_lock * call tty_ldisc_halt (clear TTY_LDISC), tty_lock is _not_ held * do some other work * take tty_lock, call tty_ldisc_enable (set TTY_LDISC), put tty_lock I cannot see how 2) can be a problem, as there I see no race. OTOH, 1) and 3) can happen without problems. This patch the case 3) by checking TTY_LDISC_CHANGING along with TTY_CLOSING in tty_reopen. 1) will be fixed in the following patch. Nicely reproducible with two processes: while (1) { fd = open("/dev/ttyS1", O_RDWR); if (fd < 0) { warn("open"); continue; } close(fd); } -------- while (1) { fd = open("/dev/ttyS1", O_RDWR); ld1 = 0; ld2 = 2; while (1) { ioctl(fd, TIOCSETD, &ld1); ioctl(fd, TIOCSETD, &ld2); } close(fd); } Signed-off-by: Jiri Slaby Reported-by: Cc: Kyle McMartin Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index c05c5af5aa0..878f6d667b1 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1310,7 +1310,8 @@ static int tty_reopen(struct tty_struct *tty) { struct tty_driver *driver = tty->driver; - if (test_bit(TTY_CLOSING, &tty->flags)) + if (test_bit(TTY_CLOSING, &tty->flags) || + test_bit(TTY_LDISC_CHANGING, &tty->flags)) return -EIO; if (driver->type == TTY_DRIVER_TYPE_PTY && -- cgit v1.2.3-70-g09d2 From acfa747baf73922021a047f2d87a2d866f5dbab5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 29 Nov 2010 10:16:54 +0100 Subject: TTY: open/hangup race fixup Like in the "TTY: don't allow reopen when ldisc is changing" patch, this one fixes a TTY WARNING as described in the option 1) there: 1) __tty_hangup from tty_ldisc_hangup to tty_ldisc_enable. During this section tty_lock is held. However tty_lock is temporarily dropped in the middle of the function by tty_ldisc_hangup. The fix is to introduce a new flag which we set during the unlocked window and check it in tty_reopen too. The flag is TTY_HUPPING and is cleared after TTY_HUPPED is set. While at it, remove duplicate TTY_HUPPED set_bit. The one after calling ops->hangup seems to be more correct. But anyway, we hold tty_lock, so there should be no difference. Also document the function it does that kind of crap. Nicely reproducible with two forked children: static void do_work(const char *tty) { if (signal(SIGHUP, SIG_IGN) == SIG_ERR) exit(1); setsid(); while (1) { int fd = open(tty, O_RDWR|O_NOCTTY); if (fd < 0) continue; if (ioctl(fd, TIOCSCTTY)) continue; if (vhangup()) continue; close(fd); } exit(0); } Signed-off-by: Jiri Slaby Reported-by: Reported-by: Kyle McMartin Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 10 +++++++++- include/linux/tty.h | 1 + 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 878f6d667b1..35480dd57a3 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -559,6 +559,9 @@ void __tty_hangup(struct tty_struct *tty) tty_lock(); + /* some functions below drop BTM, so we need this bit */ + set_bit(TTY_HUPPING, &tty->flags); + /* inuse_filps is protected by the single tty lock, this really needs to change if we want to flush the workqueue with the lock held */ @@ -578,6 +581,10 @@ void __tty_hangup(struct tty_struct *tty) } spin_unlock(&tty_files_lock); + /* + * it drops BTM and thus races with reopen + * we protect the race by TTY_HUPPING + */ tty_ldisc_hangup(tty); read_lock(&tasklist_lock); @@ -615,7 +622,6 @@ void __tty_hangup(struct tty_struct *tty) tty->session = NULL; tty->pgrp = NULL; tty->ctrl_status = 0; - set_bit(TTY_HUPPED, &tty->flags); spin_unlock_irqrestore(&tty->ctrl_lock, flags); /* Account for the p->signal references we killed */ @@ -641,6 +647,7 @@ void __tty_hangup(struct tty_struct *tty) * can't yet guarantee all that. */ set_bit(TTY_HUPPED, &tty->flags); + clear_bit(TTY_HUPPING, &tty->flags); tty_ldisc_enable(tty); tty_unlock(); @@ -1311,6 +1318,7 @@ static int tty_reopen(struct tty_struct *tty) struct tty_driver *driver = tty->driver; if (test_bit(TTY_CLOSING, &tty->flags) || + test_bit(TTY_HUPPING, &tty->flags) || test_bit(TTY_LDISC_CHANGING, &tty->flags)) return -EIO; diff --git a/include/linux/tty.h b/include/linux/tty.h index c7ea9bc8897..021bfd2f086 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -367,6 +367,7 @@ struct tty_file_private { #define TTY_HUPPED 18 /* Post driver->hangup() */ #define TTY_FLUSHING 19 /* Flushing to ldisc in progress */ #define TTY_FLUSHPENDING 20 /* Queued buffer flush pending */ +#define TTY_HUPPING 21 /* ->hangup() in progress */ #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) -- cgit v1.2.3-70-g09d2 From bcb38ceb225f5d5b2198a2755277cd441ed1e82b Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 30 Nov 2010 09:15:46 +1000 Subject: Revert "debug_locks: set oops_in_progress if we will log messages." This reverts commit e0fdace10e75dac67d906213b780ff1b1a4cc360. On-list discussion seems to suggest that the robustness fixes for printk make this unnecessary and DaveM has also agreed in person at Kernel Summit and on list. The main problem with this code is once we hit a lockdep splat we always keep oops_in_progress set, the console layer uses oops_in_progress with KMS to decide when it should be showing the oops and not showing X, so it causes problems around suspend/resume time when a userspace resume can cause a console switch away from X, only if oops_in_progress is set (which is what we want if an oops actually is in progress, but not because we had a lockdep splat 2 days prior). Cc: David S Miller Cc: Ingo Molnar Signed-off-by: Dave Airlie Signed-off-by: Linus Torvalds --- lib/debug_locks.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/lib/debug_locks.c b/lib/debug_locks.c index 5bf0020b924..b1c17730767 100644 --- a/lib/debug_locks.c +++ b/lib/debug_locks.c @@ -8,7 +8,6 @@ * * Copyright (C) 2006 Red Hat, Inc., Ingo Molnar */ -#include #include #include #include @@ -39,7 +38,6 @@ int debug_locks_off(void) { if (__debug_locks_off()) { if (!debug_locks_silent) { - oops_in_progress = 1; console_verbose(); return 1; } -- cgit v1.2.3-70-g09d2 From 805e3f495057aa5307ad4e3d6dc7073d4733c691 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 3 Nov 2010 15:32:21 +0000 Subject: xen: x86/32: perform initial startup on initial_page_table Only make swapper_pg_dir readonly and pinned when generic x86 architecture code (which also starts on initial_page_table) switches to it. This helps ensure that the generic setup paths work on Xen unmodified. In particular clone_pgd_range writes directly to the destination pgd entries and is used to initialise swapper_pg_dir so we need to ensure that it remains writeable until the last possible moment during bring up. This is complicated slightly by the need to avoid sharing kernel PMD entries when running under Xen, therefore the Xen implementation must make a copy of the kernel PMD (which is otherwise referred to by both intial_page_table and swapper_pg_dir) before switching to swapper_pg_dir. Signed-off-by: Ian Campbell Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Jeremy Fitzhardinge Signed-off-by: Jeremy Fitzhardinge --- arch/x86/xen/enlighten.c | 2 -- arch/x86/xen/mmu.c | 69 +++++++++++++++++++++++++++++++++++++++--------- 2 files changed, 56 insertions(+), 15 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 4a5973abefc..0db7303bccb 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1187,8 +1187,6 @@ asmlinkage void __init xen_start_kernel(void) /* Allocate and initialize top and mid mfn levels for p2m structure */ xen_build_mfn_list_list(); - init_mm.pgd = pgd; - /* keep using Xen gdt for now; no urgent need to change it */ #ifdef CONFIG_X86_32 diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 21ed8d7f75a..c9cf23e1744 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -2119,44 +2119,83 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, return pgd; } #else /* !CONFIG_X86_64 */ -static RESERVE_BRK_ARRAY(pmd_t, level2_kernel_pgt, PTRS_PER_PMD); +static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD); +static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD); + +static __init void xen_write_cr3_init(unsigned long cr3) +{ + unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir)); + + BUG_ON(read_cr3() != __pa(initial_page_table)); + BUG_ON(cr3 != __pa(swapper_pg_dir)); + + /* + * We are switching to swapper_pg_dir for the first time (from + * initial_page_table) and therefore need to mark that page + * read-only and then pin it. + * + * Xen disallows sharing of kernel PMDs for PAE + * guests. Therefore we must copy the kernel PMD from + * initial_page_table into a new kernel PMD to be used in + * swapper_pg_dir. + */ + swapper_kernel_pmd = + extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE); + memcpy(swapper_kernel_pmd, initial_kernel_pmd, + sizeof(pmd_t) * PTRS_PER_PMD); + swapper_pg_dir[KERNEL_PGD_BOUNDARY] = + __pgd(__pa(swapper_kernel_pmd) | _PAGE_PRESENT); + set_page_prot(swapper_kernel_pmd, PAGE_KERNEL_RO); + + set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO); + xen_write_cr3(cr3); + pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, pfn); + + pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, + PFN_DOWN(__pa(initial_page_table))); + set_page_prot(initial_page_table, PAGE_KERNEL); + set_page_prot(initial_kernel_pmd, PAGE_KERNEL); + + pv_mmu_ops.write_cr3 = &xen_write_cr3; +} __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn) { pmd_t *kernel_pmd; - level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE); + initial_kernel_pmd = + extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE); max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) + xen_start_info->nr_pt_frames * PAGE_SIZE + 512*1024); kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd); - memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD); + memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD); - xen_map_identity_early(level2_kernel_pgt, max_pfn); + xen_map_identity_early(initial_kernel_pmd, max_pfn); - memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD); - set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY], - __pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT)); + memcpy(initial_page_table, pgd, sizeof(pgd_t) * PTRS_PER_PGD); + initial_page_table[KERNEL_PGD_BOUNDARY] = + __pgd(__pa(initial_kernel_pmd) | _PAGE_PRESENT); - set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO); - set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO); + set_page_prot(initial_kernel_pmd, PAGE_KERNEL_RO); + set_page_prot(initial_page_table, PAGE_KERNEL_RO); set_page_prot(empty_zero_page, PAGE_KERNEL_RO); pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd))); - xen_write_cr3(__pa(swapper_pg_dir)); - - pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir))); + pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, + PFN_DOWN(__pa(initial_page_table))); + xen_write_cr3(__pa(initial_page_table)); memblock_x86_reserve_range(__pa(xen_start_info->pt_base), __pa(xen_start_info->pt_base + xen_start_info->nr_pt_frames * PAGE_SIZE), "XEN PAGETABLES"); - return swapper_pg_dir; + return initial_page_table; } #endif /* CONFIG_X86_64 */ @@ -2290,7 +2329,11 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .write_cr2 = xen_write_cr2, .read_cr3 = xen_read_cr3, +#ifdef CONFIG_X86_32 + .write_cr3 = xen_write_cr3_init, +#else .write_cr3 = xen_write_cr3, +#endif .flush_tlb_user = xen_flush_tlb, .flush_tlb_kernel = xen_flush_tlb, -- cgit v1.2.3-70-g09d2 From 67bace72ee64f6a11cfb914b91d9d6bd47e80ed8 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 29 Nov 2010 20:34:38 -0500 Subject: parisc: remove redundant initialization in sigsegv path of sys_rt_sigreturn Noticed-by: Randy Dunlap Signed-off-by: Kyle McMartin --- arch/parisc/kernel/signal.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 35c827e94e3..609a331878e 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -98,7 +98,6 @@ void sys_rt_sigreturn(struct pt_regs *regs, int in_syscall) { struct rt_sigframe __user *frame; - struct siginfo si; sigset_t set; unsigned long usp = (regs->gr[30] & ~(0x01UL)); unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE; @@ -178,13 +177,7 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall) give_sigsegv: DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n"); - si.si_signo = SIGSEGV; - si.si_errno = 0; - si.si_code = SI_KERNEL; - si.si_pid = task_pid_vnr(current); - si.si_uid = current_uid(); - si.si_addr = &frame->uc; - force_sig_info(SIGSEGV, &si, current); + force_sig(SIGSEGV, current); return; } -- cgit v1.2.3-70-g09d2 From e8a7e48bb248a1196484d3f8afa53bded2b24e71 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 29 Nov 2010 20:42:04 -0800 Subject: Linux 2.6.37-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index b31d21377e4..9e3c89030f5 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 37 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Flesh-Eating Bats with Fangs # *DOCUMENTATION* -- cgit v1.2.3-70-g09d2 From 78415d2d306bfed0a0ac351aec6c69759d007224 Mon Sep 17 00:00:00 2001 From: Shirish Pargaonkar Date: Sat, 27 Nov 2010 11:37:26 -0600 Subject: cifs: Misc. cleanup in cifsacl handling [try #4] Change the name of function mode_to_acl to mode_to_cifs_acl. Handle return code in functions mode_to_cifs_acl and cifs_acl_to_fattr. Signed-off-by: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/cifsacl.c | 2 +- fs/cifs/cifsproto.h | 2 +- fs/cifs/inode.c | 20 +++++++++++++++----- 3 files changed, 17 insertions(+), 7 deletions(-) diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index 91992abc214..c15e3ee730c 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -726,7 +726,7 @@ cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr, } /* Convert mode bits to an ACL so we can update the ACL on the server */ -int mode_to_acl(struct inode *inode, const char *path, __u64 nmode) +int mode_to_cifs_acl(struct inode *inode, const char *path, __u64 nmode) { int rc = 0; __u32 secdesclen = 0; diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 6ed59af4520..b498731852d 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -133,7 +133,7 @@ extern int cifs_get_inode_info_unix(struct inode **pinode, extern int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr, struct inode *inode, const char *path, const __u16 *pfid); -extern int mode_to_acl(struct inode *inode, const char *path, __u64); +extern int mode_to_cifs_acl(struct inode *inode, const char *path, __u64); extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *, const char *); diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 669298f088d..28cb6e73594 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -689,8 +689,13 @@ int cifs_get_inode_info(struct inode **pinode, #ifdef CONFIG_CIFS_EXPERIMENTAL /* fill in 0777 bits from ACL */ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) { - cFYI(1, "Getting mode bits from ACL"); - cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path, pfid); + rc = cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path, + pfid); + if (rc) { + cFYI(1, "%s: Getting ACL failed with error: %d", + __func__, rc); + goto cgii_exit; + } } #endif @@ -2117,9 +2122,14 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs) if (attrs->ia_valid & ATTR_MODE) { rc = 0; #ifdef CONFIG_CIFS_EXPERIMENTAL - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) - rc = mode_to_acl(inode, full_path, mode); - else + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) { + rc = mode_to_cifs_acl(inode, full_path, mode); + if (rc) { + cFYI(1, "%s: Setting ACL failed with error: %d", + __func__, rc); + goto cifs_setattr_exit; + } + } else #endif if (((mode & S_IWUGO) == 0) && (cifsInode->cifsAttrs & ATTR_READONLY) == 0) { -- cgit v1.2.3-70-g09d2 From fbeba8bb16d7c50362e28f3f91a79fb414903199 Mon Sep 17 00:00:00 2001 From: Shirish Pargaonkar Date: Sat, 27 Nov 2010 11:37:54 -0600 Subject: cifs: Handle extended attribute name cifs_acl to generate cifs acl blob (try #4) Add extended attribute name system.cifs_acl Get/generate cifs/ntfs acl blob and hand over to the invoker however it wants to parse/process it under experimental configurable option CIFS_ACL. Do not get CIFS/NTFS ACL for xattr for attribute system.posix_acl_access Signed-off-by: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/Kconfig | 7 +++++++ fs/cifs/cifsacl.c | 2 +- fs/cifs/cifsproto.h | 2 ++ fs/cifs/xattr.c | 55 +++++++++++++++++++++++++++++------------------------ 4 files changed, 40 insertions(+), 26 deletions(-) diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig index 3bdbfb026b6..ee45648b0d1 100644 --- a/fs/cifs/Kconfig +++ b/fs/cifs/Kconfig @@ -144,6 +144,13 @@ config CIFS_FSCACHE to be cached locally on disk through the general filesystem cache manager. If unsure, say N. +config CIFS_ACL + bool "Provide CIFS ACL support (EXPERIMENTAL)" + depends on EXPERIMENTAL && CIFS_XATTR + help + Allows to fetch CIFS/NTFS ACL from the server. The DACL blob + is handed over to the application/caller. + config CIFS_EXPERIMENTAL bool "CIFS Experimental Features (EXPERIMENTAL)" depends on CIFS && EXPERIMENTAL diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index c15e3ee730c..c6ebea088ac 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -608,7 +608,7 @@ static struct cifs_ntsd *get_cifs_acl_by_path(struct cifs_sb_info *cifs_sb, } /* Retrieve an ACL from the server */ -static struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *cifs_sb, +struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *cifs_sb, struct inode *inode, const char *path, u32 *pacllen) { diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index b498731852d..db961dc4fd3 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -134,6 +134,8 @@ extern int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr, struct inode *inode, const char *path, const __u16 *pfid); extern int mode_to_cifs_acl(struct inode *inode, const char *path, __u64); +extern struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *, struct inode *, + const char *, u32 *); extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *, const char *); diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c index a264b744bb4..eae2a149160 100644 --- a/fs/cifs/xattr.c +++ b/fs/cifs/xattr.c @@ -30,10 +30,11 @@ #define MAX_EA_VALUE_SIZE 65535 #define CIFS_XATTR_DOS_ATTRIB "user.DosAttrib" +#define CIFS_XATTR_CIFS_ACL "system.cifs_acl" #define CIFS_XATTR_USER_PREFIX "user." #define CIFS_XATTR_SYSTEM_PREFIX "system." #define CIFS_XATTR_OS2_PREFIX "os2." -#define CIFS_XATTR_SECURITY_PREFIX ".security" +#define CIFS_XATTR_SECURITY_PREFIX "security." #define CIFS_XATTR_TRUSTED_PREFIX "trusted." #define XATTR_TRUSTED_PREFIX_LEN 8 #define XATTR_SECURITY_PREFIX_LEN 9 @@ -277,29 +278,8 @@ ssize_t cifs_getxattr(struct dentry *direntry, const char *ea_name, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); -#ifdef CONFIG_CIFS_EXPERIMENTAL - else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) { - __u16 fid; - int oplock = 0; - struct cifs_ntsd *pacl = NULL; - __u32 buflen = 0; - if (experimEnabled) - rc = CIFSSMBOpen(xid, pTcon, full_path, - FILE_OPEN, GENERIC_READ, 0, &fid, - &oplock, NULL, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - /* else rc is EOPNOTSUPP from above */ - - if (rc == 0) { - rc = CIFSSMBGetCIFSACL(xid, pTcon, fid, &pacl, - &buflen); - CIFSSMBClose(xid, pTcon, fid); - } - } -#endif /* EXPERIMENTAL */ #else - cFYI(1, "query POSIX ACL not supported yet"); + cFYI(1, "Query POSIX ACL not supported yet"); #endif /* CONFIG_CIFS_POSIX */ } else if (strncmp(ea_name, POSIX_ACL_XATTR_DEFAULT, strlen(POSIX_ACL_XATTR_DEFAULT)) == 0) { @@ -311,8 +291,33 @@ ssize_t cifs_getxattr(struct dentry *direntry, const char *ea_name, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); #else - cFYI(1, "query POSIX default ACL not supported yet"); -#endif + cFYI(1, "Query POSIX default ACL not supported yet"); +#endif /* CONFIG_CIFS_POSIX */ + } else if (strncmp(ea_name, CIFS_XATTR_CIFS_ACL, + strlen(CIFS_XATTR_CIFS_ACL)) == 0) { +#ifdef CONFIG_CIFS_ACL + u32 acllen; + struct cifs_ntsd *pacl; + + pacl = get_cifs_acl(cifs_sb, direntry->d_inode, + full_path, &acllen); + if (IS_ERR(pacl)) { + rc = PTR_ERR(pacl); + cERROR(1, "%s: error %zd getting sec desc", + __func__, rc); + } else { + if (ea_value) { + if (acllen > buf_size) + acllen = -ERANGE; + else + memcpy(ea_value, pacl, acllen); + } + rc = acllen; + kfree(pacl); + } +#else + cFYI(1, "Query CIFS ACL not supported yet"); +#endif /* CONFIG_CIFS_ACL */ } else if (strncmp(ea_name, CIFS_XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) == 0) { cFYI(1, "Trusted xattr namespace not supported yet"); -- cgit v1.2.3-70-g09d2 From 607a569da4cf289fd8eb3887080ed3b212e3112d Mon Sep 17 00:00:00 2001 From: Suresh Jayaraman Date: Wed, 24 Nov 2010 17:49:05 +0530 Subject: cifs: allow fsc mount option only if CONFIG_CIFS_FSCACHE is set Currently, it is possible to specify 'fsc' mount option even if CONFIG_CIFS_FSCACHE has not been set. The option is being ignored silently while the user fscache functionality to work. Fix this by raising error when the CONFIG option is not set. Reported-by: Jeff Layton Reviewed-by: Jeff Layton Signed-off-by: Suresh Jayaraman Signed-off-by: Steve French --- fs/cifs/connect.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 251a17c0354..32fa4d9b5db 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1352,6 +1352,11 @@ cifs_parse_mount_options(char *options, const char *devname, "supported. Instead set " "/proc/fs/cifs/LookupCacheEnabled to 0\n"); } else if (strnicmp(data, "fsc", 3) == 0) { +#ifndef CONFIG_CIFS_FSCACHE + cERROR(1, "FS-Cache support needs CONFIG_CIFS_FSCACHE" + "kernel config option set"); + return 1; +#endif vol->fsc = true; } else if (strnicmp(data, "mfsymlinks", 10) == 0) { vol->mfsymlinks = true; -- cgit v1.2.3-70-g09d2 From b81209de2455c6051cf67f2acd8ec26ccb8caf83 Mon Sep 17 00:00:00 2001 From: Suresh Jayaraman Date: Wed, 24 Nov 2010 17:49:06 +0530 Subject: cifs: enable fscache iff fsc mount option is used explicitly Currently, if CONFIG_CIFS_FSCACHE is set, fscache is enabled on files opened as read-only irrespective of the 'fsc' mount option. Fix this by enabling fscache only if 'fsc' mount option is specified explicitly. Remove an extraneous cFYI debug message and fix a typo while at it. Reported-by: Jeff Layton Acked-by: Jeff Layton Signed-off-by: Suresh Jayaraman Signed-off-by: Steve French --- fs/cifs/fscache.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c index a2ad94efcfe..297a43d0ff7 100644 --- a/fs/cifs/fscache.c +++ b/fs/cifs/fscache.c @@ -2,7 +2,7 @@ * fs/cifs/fscache.c - CIFS filesystem cache interface * * Copyright (c) 2010 Novell, Inc. - * Author(s): Suresh Jayaraman (sjayaraman@suse.de> + * Author(s): Suresh Jayaraman * * This library is free software; you can redistribute it and/or modify * it under the terms of the GNU Lesser General Public License as published @@ -67,10 +67,12 @@ static void cifs_fscache_enable_inode_cookie(struct inode *inode) if (cifsi->fscache) return; - cifsi->fscache = fscache_acquire_cookie(tcon->fscache, + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE) { + cifsi->fscache = fscache_acquire_cookie(tcon->fscache, &cifs_fscache_inode_object_def, cifsi); - cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache, + cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache, cifsi->fscache); + } } void cifs_fscache_release_inode_cookie(struct inode *inode) @@ -101,10 +103,8 @@ void cifs_fscache_set_inode_cookie(struct inode *inode, struct file *filp) { if ((filp->f_flags & O_ACCMODE) != O_RDONLY) cifs_fscache_disable_inode_cookie(inode); - else { + else cifs_fscache_enable_inode_cookie(inode); - cFYI(1, "CIFS: fscache inode cookie set"); - } } void cifs_fscache_reset_inode_cookie(struct inode *inode) -- cgit v1.2.3-70-g09d2 From 476428f8c3bb6679f8f52bf2b935ac40bc9c7358 Mon Sep 17 00:00:00 2001 From: Suresh Jayaraman Date: Wed, 24 Nov 2010 17:49:07 +0530 Subject: cifs: display fsc in /proc/mounts Reviewed-by: Jeff Layton Signed-off-by: Suresh Jayaraman Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 9c3789762ab..76c8a906a63 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -458,6 +458,8 @@ cifs_show_options(struct seq_file *s, struct vfsmount *m) seq_printf(s, ",acl"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MF_SYMLINKS) seq_printf(s, ",mfsymlinks"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE) + seq_printf(s, ",fsc"); seq_printf(s, ",rsize=%d", cifs_sb->rsize); seq_printf(s, ",wsize=%d", cifs_sb->wsize); -- cgit v1.2.3-70-g09d2 From 60686aa0086a14f8b15c83a09f3df1eebe3aab3c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 30 Nov 2010 08:14:21 +0100 Subject: ALSA: Fix SNDCTL_DSP_RESET ioctl for OSS emulation In OSS emulation, SNDCTL_DSP_RESET ioctl needs the reset of the internal buffer state in addition to drop of the running streams. Otherwise the succeeding access becomes inconsistent. Tested-by: Amit Nagal Cc: Signed-off-by: Takashi Iwai --- sound/core/oss/pcm_oss.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index 5c8c7dff8ed..b753ec661fc 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -1510,16 +1510,19 @@ static ssize_t snd_pcm_oss_read1(struct snd_pcm_substream *substream, char __use static int snd_pcm_oss_reset(struct snd_pcm_oss_file *pcm_oss_file) { struct snd_pcm_substream *substream; + struct snd_pcm_runtime *runtime; + int i; - substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_PLAYBACK]; - if (substream != NULL) { - snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL); - substream->runtime->oss.prepare = 1; - } - substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_CAPTURE]; - if (substream != NULL) { + for (i = 0; i < 2; i++) { + substream = pcm_oss_file->streams[i]; + if (!substream) + continue; + runtime = substream->runtime; snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL); - substream->runtime->oss.prepare = 1; + runtime->oss.prepare = 1; + runtime->oss.buffer_used = 0; + runtime->oss.prev_hw_ptr_period = 0; + runtime->oss.period_ptr = 0; } return 0; } -- cgit v1.2.3-70-g09d2 From 4249f8acf993046948dc1f2e74244fe484c8cb8f Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Sun, 28 Nov 2010 20:30:19 +0200 Subject: ARM: SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST Enable compilation of platform devices and initialization code used in SMDK2416 board file. Signed-off-by: Yauhen Kharuzhy Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2416/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 87b9c9f003b..27b3e7c9d61 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -35,9 +35,12 @@ menu "S3C2416 Machines" config MACH_SMDK2416 bool "SMDK2416" select CPU_S3C2416 + select MACH_SMDK select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 + select S3C_DEV_NAND + select S3C_DEV_USB_HOST select S3C2416_PM if PM help Say Y here if you are using an SMDK2416 -- cgit v1.2.3-70-g09d2 From 71f608ef56c987c5325c3aaf9c3fadd4ddc77f64 Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Sun, 28 Nov 2010 20:30:23 +0200 Subject: ARM: S3C2443: Select properly ARM core type Select ARM920T core when compiling kernel for s3c2443. Signed-off-by: Yauhen Kharuzhy Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2443/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 4fef723126f..31babec90ce 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -5,6 +5,7 @@ config CPU_S3C2443 bool depends on ARCH_S3C2410 + select CPU_ARM920T select S3C2443_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 select SAMSUNG_CLKSRC -- cgit v1.2.3-70-g09d2 From 4acf89fb3bbb01ba9de4a7cc102e46095a12c94e Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Sun, 28 Nov 2010 20:30:27 +0200 Subject: ARM: S3C2412: Fix typo in CONFIG_CPU_S3C2412_ONLY definition Dependency on (CPU_S3C2416 is not selected) was defined as "!CPU_2416", instead of "!CPU_S3C2416". Fix it. Signed-off-by: Yauhen Kharuzhy Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2412/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index cef6a65637b..fa2e5bffbb8 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -16,7 +16,7 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ - !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ + !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 -- cgit v1.2.3-70-g09d2 From 3cf2efb1a7c68d55d60dcb2ed9609e1a2fc25952 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 29 Nov 2010 10:09:55 +0000 Subject: Revert "drm/i915/dp: use VBT provided eDP params if available" This reverts commit 869184a675662bddcdf76c5b95665272facff2b8. This is required for the Sony Vaio Jesse was working on at the time, but breaks most other eDP machines - machines that were working in earlier kernels. Reported-and-tested-by: Dave Airlie Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31188 Tested-by: Zhao Jian Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_dp.c | 146 ++++++++++++++++------------------------ 1 file changed, 57 insertions(+), 89 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index c8e00555331..300f64b4238 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -584,17 +584,6 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, mode->clock = dev_priv->panel_fixed_mode->clock; } - /* Just use VBT values for eDP */ - if (is_edp(intel_dp)) { - intel_dp->lane_count = dev_priv->edp.lanes; - intel_dp->link_bw = dev_priv->edp.rate; - adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw); - DRM_DEBUG_KMS("eDP link bw %02x lane count %d clock %d\n", - intel_dp->link_bw, intel_dp->lane_count, - adjusted_mode->clock); - return true; - } - for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { for (clock = 0; clock <= max_clock; clock++) { int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count); @@ -613,6 +602,19 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, } } + if (is_edp(intel_dp)) { + /* okay we failed just pick the highest */ + intel_dp->lane_count = max_lane_count; + intel_dp->link_bw = bws[max_clock]; + adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw); + DRM_DEBUG_KMS("Force picking display port link bw %02x lane " + "count %d clock %d\n", + intel_dp->link_bw, intel_dp->lane_count, + adjusted_mode->clock); + + return true; + } + return false; } @@ -1087,21 +1089,11 @@ intel_get_adjust_train(struct intel_dp *intel_dp) } static uint32_t -intel_dp_signal_levels(struct intel_dp *intel_dp) +intel_dp_signal_levels(uint8_t train_set, int lane_count) { - struct drm_device *dev = intel_dp->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t signal_levels = 0; - u8 train_set = intel_dp->train_set[0]; - u32 vswing = train_set & DP_TRAIN_VOLTAGE_SWING_MASK; - u32 preemphasis = train_set & DP_TRAIN_PRE_EMPHASIS_MASK; + uint32_t signal_levels = 0; - if (is_edp(intel_dp)) { - vswing = dev_priv->edp.vswing; - preemphasis = dev_priv->edp.preemphasis; - } - - switch (vswing) { + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { case DP_TRAIN_VOLTAGE_SWING_400: default: signal_levels |= DP_VOLTAGE_0_4; @@ -1116,7 +1108,7 @@ intel_dp_signal_levels(struct intel_dp *intel_dp) signal_levels |= DP_VOLTAGE_1_2; break; } - switch (preemphasis) { + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { case DP_TRAIN_PRE_EMPHASIS_0: default: signal_levels |= DP_PRE_EMPHASIS_0; @@ -1202,18 +1194,6 @@ intel_channel_eq_ok(struct intel_dp *intel_dp) return true; } -static bool -intel_dp_aux_handshake_required(struct intel_dp *intel_dp) -{ - struct drm_device *dev = intel_dp->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - - if (is_edp(intel_dp) && dev_priv->no_aux_handshake) - return false; - - return true; -} - static bool intel_dp_set_link_train(struct intel_dp *intel_dp, uint32_t dp_reg_value, @@ -1226,9 +1206,6 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, I915_WRITE(intel_dp->output_reg, dp_reg_value); POSTING_READ(intel_dp->output_reg); - if (!intel_dp_aux_handshake_required(intel_dp)) - return true; - intel_dp_aux_native_write_1(intel_dp, DP_TRAINING_PATTERN_SET, dp_train_pat); @@ -1261,11 +1238,10 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) POSTING_READ(intel_dp->output_reg); intel_wait_for_vblank(dev, intel_crtc->pipe); - if (intel_dp_aux_handshake_required(intel_dp)) - /* Write the link configuration data */ - intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET, - intel_dp->link_configuration, - DP_LINK_CONFIGURATION_SIZE); + /* Write the link configuration data */ + intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET, + intel_dp->link_configuration, + DP_LINK_CONFIGURATION_SIZE); DP |= DP_PORT_EN; if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) @@ -1283,7 +1259,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1297,37 +1273,33 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) break; /* Set training pattern 1 */ - udelay(500); - if (intel_dp_aux_handshake_required(intel_dp)) { + udelay(100); + if (!intel_dp_get_link_status(intel_dp)) break; - } else { - if (!intel_dp_get_link_status(intel_dp)) - break; - if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { - clock_recovery = true; - break; - } + if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + clock_recovery = true; + break; + } - /* Check to see if we've tried the max voltage */ - for (i = 0; i < intel_dp->lane_count; i++) - if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) - break; - if (i == intel_dp->lane_count) + /* Check to see if we've tried the max voltage */ + for (i = 0; i < intel_dp->lane_count; i++) + if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) break; + if (i == intel_dp->lane_count) + break; - /* Check to see if we've tried the same voltage 5 times */ - if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { - ++tries; - if (tries == 5) - break; - } else - tries = 0; - voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + /* Check to see if we've tried the same voltage 5 times */ + if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { + ++tries; + if (tries == 5) + break; + } else + tries = 0; + voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; - /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); - } + /* Compute new intel_dp->train_set as requested by target */ + intel_get_adjust_train(intel_dp); } intel_dp->DP = DP; @@ -1354,7 +1326,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1368,28 +1340,24 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) DP_TRAINING_PATTERN_2)) break; - udelay(500); - - if (!intel_dp_aux_handshake_required(intel_dp)) { + udelay(400); + if (!intel_dp_get_link_status(intel_dp)) break; - } else { - if (!intel_dp_get_link_status(intel_dp)) - break; - if (intel_channel_eq_ok(intel_dp)) { - channel_eq = true; - break; - } + if (intel_channel_eq_ok(intel_dp)) { + channel_eq = true; + break; + } - /* Try 5 times */ - if (tries > 5) - break; + /* Try 5 times */ + if (tries > 5) + break; - /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); - ++tries; - } + /* Compute new intel_dp->train_set as requested by target */ + intel_get_adjust_train(intel_dp); + ++tries; } + if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) reg = DP | DP_LINK_TRAIN_OFF_CPT; else -- cgit v1.2.3-70-g09d2 From b94ca0792d49f5856570ba66f53acd69cd0917fc Mon Sep 17 00:00:00 2001 From: Eric Benard Date: Fri, 15 Oct 2010 11:27:17 +0200 Subject: at91: merge all at91rm9200 defconfig in one single file About all options present in each file are activated in the single file. Signed-off-by: Eric Benard Tested-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/configs/at91rm9200_defconfig | 341 ++++++++++++++++++++++++++++++++ arch/arm/configs/at91rm9200dk_defconfig | 72 ------- arch/arm/configs/at91rm9200ek_defconfig | 73 ------- arch/arm/configs/ateb9200_defconfig | 131 ------------ arch/arm/configs/carmeva_defconfig | 47 ----- arch/arm/configs/cpuat91_defconfig | 112 ----------- arch/arm/configs/csb337_defconfig | 104 ---------- arch/arm/configs/csb637_defconfig | 98 --------- arch/arm/configs/ecbat91_defconfig | 99 ---------- arch/arm/configs/kafa_defconfig | 61 ------ arch/arm/configs/kb9202_defconfig | 127 ------------ arch/arm/configs/onearm_defconfig | 80 -------- arch/arm/configs/picotux200_defconfig | 242 ----------------------- arch/arm/configs/yl9200_defconfig | 137 ------------- 14 files changed, 341 insertions(+), 1383 deletions(-) create mode 100644 arch/arm/configs/at91rm9200_defconfig delete mode 100644 arch/arm/configs/at91rm9200dk_defconfig delete mode 100644 arch/arm/configs/at91rm9200ek_defconfig delete mode 100644 arch/arm/configs/ateb9200_defconfig delete mode 100644 arch/arm/configs/carmeva_defconfig delete mode 100644 arch/arm/configs/cpuat91_defconfig delete mode 100644 arch/arm/configs/csb337_defconfig delete mode 100644 arch/arm/configs/csb637_defconfig delete mode 100644 arch/arm/configs/ecbat91_defconfig delete mode 100644 arch/arm/configs/kafa_defconfig delete mode 100644 arch/arm/configs/kb9202_defconfig delete mode 100644 arch/arm/configs/onearm_defconfig delete mode 100644 arch/arm/configs/picotux200_defconfig delete mode 100644 arch/arm/configs/yl9200_defconfig diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig new file mode 100644 index 00000000000..38cb7c98542 --- /dev/null +++ b/arch/arm/configs/at91rm9200_defconfig @@ -0,0 +1,341 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_MACH_ONEARM=y +CONFIG_ARCH_AT91RM9200DK=y +CONFIG_MACH_AT91RM9200EK=y +CONFIG_MACH_CSB337=y +CONFIG_MACH_CSB637=y +CONFIG_MACH_CARMEVA=y +CONFIG_MACH_ATEB9200=y +CONFIG_MACH_KB9200=y +CONFIG_MACH_PICOTUX2XX=y +CONFIG_MACH_KAFA=y +CONFIG_MACH_ECBAT91=y +CONFIG_MACH_YL9200=y +CONFIG_MACH_CPUAT91=y +CONFIG_MACH_ECO920=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=100 +# CONFIG_ARM_THUMB is not set +CONFIG_PCCARD=y +CONFIG_AT91_CF=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x10000000 +CONFIG_ZBOOT_ROM_BSS=0x20040000 +CONFIG_KEXEC=y +CONFIG_FPE_NWFPE=y +CONFIG_BINFMT_MISC=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_TUNNEL=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_TCLIB=y +CONFIG_EEPROM_LEGACY=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_TUN=m +CONFIG_PHYLIB=y +CONFIG_DAVICOM_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_MICREL_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=32 +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_BITBANG=y +CONFIG_GPIO_SYSFS=y +CONFIG_HWMON=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_PCF8591=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83L785TS=m +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91RM9200_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_FB_S1D13XXX=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_DISPLAY_SUPPORT=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_MINI_4x6=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_MCT_U232=y +CONFIG_USB_SERIAL_PL2303=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_MMC=y +CONFIG_MMC_AT91=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PCF8563=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_REISERFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=m +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RUBIN=y +CONFIG_CRAMFS=y +CONFIG_MINIX_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_SMB_FS=m +CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_FTRACE is not set +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig deleted file mode 100644 index 4438e64f3bf..00000000000 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ /dev/null @@ -1,72 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_ECO920=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig deleted file mode 100644 index ccd517c64bc..00000000000 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ /dev/null @@ -1,73 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_AT91RM9200EK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_S1D13XXX=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig deleted file mode 100644 index 1b0e9a1689b..00000000000 --- a/arch/arm/configs/ateb9200_defconfig +++ /dev/null @@ -1,131 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_ATEB9200=y -CONFIG_PCCARD=m -CONFIG_AT91_CF=m -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_TUN=m -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_GL620A=y -CONFIG_USB_NET_PLUSB=y -CONFIG_USB_NET_RNDIS_HOST=y -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_GADGET=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -CONFIG_REISERFS_FS=m -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V4=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_UTF8=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRC16=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig deleted file mode 100644 index ac64dbd8a49..00000000000 --- a/arch/arm/configs/carmeva_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_HOTPLUG is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_CARMEVA=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_DNOTIFY is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig deleted file mode 100644 index 022aeb55b67..00000000000 --- a/arch/arm/configs/cpuat91_defconfig +++ /dev/null @@ -1,112 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CPUAT91=y -CONFIG_AT91_TIMER_HZ=100 -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PCF8563=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig deleted file mode 100644 index a24c448840c..00000000000 --- a/arch/arm/configs/csb337_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB337=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc1" -# CONFIG_RTC_INTF_SYSFS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig deleted file mode 100644 index 98552adac5f..00000000000 --- a/arch/arm/configs/csb637_defconfig +++ /dev/null @@ -1,98 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB637=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig deleted file mode 100644 index 6bb6abdcea8..00000000000 --- a/arch/arm/configs/ecbat91_defconfig +++ /dev/null @@ -1,99 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ECBAT91=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IPV6 is not set -CONFIG_CFG80211=y -CONFIG_MAC80211=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_PRINTER=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig deleted file mode 100644 index 896dbe00dc6..00000000000 --- a/arch/arm/configs/kafa_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KAFA=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig deleted file mode 100644 index 9f906a85f5c..00000000000 --- a/arch/arm/configs/kb9202_defconfig +++ /dev/null @@ -1,127 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_AUDIT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KB9200=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x10000000 -CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_GLUEBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SPI_ATTRS=m -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig deleted file mode 100644 index 1579857aeea..00000000000 --- a/arch/arm/configs/onearm_defconfig +++ /dev/null @@ -1,80 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ONEARM=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IPV6=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_IPV6_SIT is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig deleted file mode 100644 index 4c9afa478d5..00000000000 --- a/arch/arm/configs/picotux200_defconfig +++ /dev/null @@ -1,242 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=m -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_PICOTUX2XX=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=m -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_EEPROM_LEGACY=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_NETDEVICES=y -CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -CONFIG_HWMON=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83L785TS=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=m -CONFIG_HID=m -CONFIG_USB=m -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_MMC=m -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=m -CONFIG_RTC_DRV_AT91RM9200=m -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=m -CONFIG_SMB_FS=m -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_AMIGA_PARTITION=y -CONFIG_NLS_DEFAULT="utf-8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig deleted file mode 100644 index 30c537f6108..00000000000 --- a/arch/arm/configs/yl9200_defconfig +++ /dev/null @@ -1,137 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_YL9200=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=3 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_SPI=y -CONFIG_SPI_DEBUG=y -CONFIG_SPI_ATMEL=y -CONFIG_FB=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_M66592=y -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=1 -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SLUB_DEBUG_ON=y -CONFIG_DEBUG_KOBJECT=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -- cgit v1.2.3-70-g09d2 From 3f1af9d26fb02a99a60a045b8ae93ccc6fe50b97 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 29 Nov 2010 17:42:47 +0800 Subject: ASoC: Fix missing spin_unlock_irqrestore In nuc900_dma_hw_params(), if snd_pcm_lib_malloc_pages failed it returns without calling spin_unlock_irqrestore(). Since snd_pcm_lib_malloc_pages() does not touch struct nuc900_audio, we don't need to hold the lock while calling snd_pcm_lib_malloc_pages(). Fix it by moving spin_lock_irqsave() down to after snd_pcm_lib_malloc_pages(). In nuc900_dma_prepare(), spin_unlock_irqrestore() is missing in the error path. Fix it by removing the return in default case. Signed-off-by: Axel Lin Acked-by: Wan ZongShun Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/nuc900/nuc900-pcm.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/sound/soc/nuc900/nuc900-pcm.c b/sound/soc/nuc900/nuc900-pcm.c index 2245f8b8edc..8263f56dc66 100644 --- a/sound/soc/nuc900/nuc900-pcm.c +++ b/sound/soc/nuc900/nuc900-pcm.c @@ -50,12 +50,12 @@ static int nuc900_dma_hw_params(struct snd_pcm_substream *substream, unsigned long flags; int ret = 0; - spin_lock_irqsave(&nuc900_audio->lock, flags); - ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); if (ret < 0) return ret; + spin_lock_irqsave(&nuc900_audio->lock, flags); + nuc900_audio->substream = substream; nuc900_audio->dma_addr[substream->stream] = runtime->dma_addr; nuc900_audio->buffersize[substream->stream] = @@ -169,6 +169,7 @@ static int nuc900_dma_prepare(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct nuc900_audio *nuc900_audio = runtime->private_data; unsigned long flags, val; + int ret = 0; spin_lock_irqsave(&nuc900_audio->lock, flags); @@ -197,10 +198,10 @@ static int nuc900_dma_prepare(struct snd_pcm_substream *substream) AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val); break; default: - return -EINVAL; + ret = -EINVAL; } spin_unlock_irqrestore(&nuc900_audio->lock, flags); - return 0; + return ret; } static int nuc900_dma_trigger(struct snd_pcm_substream *substream, int cmd) -- cgit v1.2.3-70-g09d2 From b1d36b1c3573fd5adecbd313d30a8bdc8d7fbc5e Mon Sep 17 00:00:00 2001 From: Daniel Glöckner Date: Tue, 30 Nov 2010 01:00:16 +0100 Subject: s6000-i2s: fix compilation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A semicolon was missing. Signed-off-by: Daniel Glöckner Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/s6000/s6000-i2s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/s6000/s6000-i2s.c b/sound/soc/s6000/s6000-i2s.c index 8778faa174a..3052f64b240 100644 --- a/sound/soc/s6000/s6000-i2s.c +++ b/sound/soc/s6000/s6000-i2s.c @@ -434,7 +434,7 @@ static struct snd_soc_dai_driver s6000_i2s_dai = { .rate_max = 1562500, }, .ops = &s6000_i2s_dai_ops, -} +}; static int __devinit s6000_i2s_probe(struct platform_device *pdev) { -- cgit v1.2.3-70-g09d2 From 9e4ea718d3c53f9f2a65ddddf95ffd7743be458e Mon Sep 17 00:00:00 2001 From: Daniel Glöckner Date: Tue, 30 Nov 2010 01:00:17 +0100 Subject: s6000-pcm: fix compilation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit s6000_soc_platform has lost its forward declaration and there no longer is a name element in it, so use a string constant when calling request_irq. Signed-off-by: Daniel Glöckner Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/s6000/s6000-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c index 271fd222bf1..ab3ccaec72d 100644 --- a/sound/soc/s6000/s6000-pcm.c +++ b/sound/soc/s6000/s6000-pcm.c @@ -473,7 +473,7 @@ static int s6000_pcm_new(struct snd_card *card, } res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED, - s6000_soc_platform.name, pcm); + "s6000-audio", pcm); if (res) { printk(KERN_ERR "s6000-pcm couldn't get IRQ\n"); return res; -- cgit v1.2.3-70-g09d2 From b76fb39d49f67a484a6adc8f041d9ad833f6860e Mon Sep 17 00:00:00 2001 From: Daniel Glöckner Date: Tue, 30 Nov 2010 01:00:18 +0100 Subject: s6105-ipcam: fix compilation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the s6105-ipcam ASoC driver had been converted to the multi-component API, a single reference to a former structure element remained, blocking successful compilation. Signed-off-by: Daniel Glöckner Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/s6000/s6105-ipcam.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/s6000/s6105-ipcam.c b/sound/soc/s6000/s6105-ipcam.c index 96c05e13753..c1244c5bc73 100644 --- a/sound/soc/s6000/s6105-ipcam.c +++ b/sound/soc/s6000/s6105-ipcam.c @@ -167,7 +167,7 @@ static int s6105_aic3x_init(struct snd_soc_pcm_runtime *rtd) snd_soc_dapm_sync(codec); - snd_ctl_add(codec->snd_card, snd_ctl_new1(&audio_out_mux, codec)); + snd_ctl_add(codec->card->snd_card, snd_ctl_new1(&audio_out_mux, codec)); return 0; } -- cgit v1.2.3-70-g09d2 From 1db550118c46d96f371de5b3d0bd51edb148bd54 Mon Sep 17 00:00:00 2001 From: Jason Chagas Date: Mon, 15 Nov 2010 09:50:12 +0800 Subject: ARM: mmp2: remove not used clk_rtc RTC clock will remain at 32KHz and powered on, there is no need for it at this moment. Signed-off-by: Jason Chagas Signed-off-by: Eric Miao --- arch/arm/mach-mmp/mmp2.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index daf3993349f..2e3dd08ccc3 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -126,7 +126,6 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000); static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000); static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000); static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000); -static APBC_CLK(rtc, MMP2_RTC, 0, 32768); static APMU_CLK(nand, NAND, 0xbf, 100000000); -- cgit v1.2.3-70-g09d2 From f9d1bf755315a66353a7f42319cff471b36fffb3 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 10 Oct 2010 00:34:28 +0200 Subject: ARM: pxa: fix pxa2xx-flash section mismatch Signed-off-by: Marek Vasut Acked-by: Haojian Zhuang Signed-off-by: Eric Miao --- drivers/mtd/maps/pxa2xx-flash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index dd90880048c..d8ae634d347 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -51,7 +51,7 @@ struct pxa2xx_flash_info { static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; -static int __init pxa2xx_flash_probe(struct platform_device *pdev) +static int __devinit pxa2xx_flash_probe(struct platform_device *pdev) { struct flash_platform_data *flash = pdev->dev.platform_data; struct pxa2xx_flash_info *info; -- cgit v1.2.3-70-g09d2 From 9f1ee150fc7039eb65039ab17d9a95dfa6250133 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 6 Nov 2010 23:34:03 +0100 Subject: ARM: pxa/palm: fix ifdef around gen_nand driver registration Reported-by: Rafael Gandolfi Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palmtx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index d2060a1d1d6..e5c9932b758 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {} /****************************************************************************** * NAND Flash ******************************************************************************/ -#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE) +#if defined(CONFIG_MTD_NAND_PLATFORM) || \ + defined(CONFIG_MTD_NAND_PLATFORM_MODULE) static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { -- cgit v1.2.3-70-g09d2 From e6afec9b6808eff6dc392ac07c1552e87aebcdf7 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Fri, 26 Nov 2010 13:45:43 +0100 Subject: ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interrupts This change limits number of GIC-originating interrupts to the platform maximum (defined by NR_IRQS) while still initialising all distributor registers. Signed-off-by: Pawel Moll Signed-off-by: Russell King --- arch/arm/common/gic.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 772f95f1aec..fea1bd7249b 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -210,7 +210,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start) { - unsigned int max_irq, i; + unsigned int gic_irqs, irq_limit, i; u32 cpumask = 1 << smp_processor_id(); if (gic_nr >= MAX_GIC_NR) @@ -226,47 +226,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, /* * Find out how many interrupts are supported. - */ - max_irq = readl(base + GIC_DIST_CTR) & 0x1f; - max_irq = (max_irq + 1) * 32; - - /* * The GIC only supports up to 1020 interrupt sources. - * Limit this to either the architected maximum, or the - * platform maximum. */ - if (max_irq > max(1020, NR_IRQS)) - max_irq = max(1020, NR_IRQS); + gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f; + gic_irqs = (gic_irqs + 1) * 32; + if (gic_irqs > 1020) + gic_irqs = 1020; /* * Set all global interrupts to be level triggered, active low. */ - for (i = 32; i < max_irq; i += 16) + for (i = 32; i < gic_irqs; i += 16) writel(0, base + GIC_DIST_CONFIG + i * 4 / 16); /* * Set all global interrupts to this CPU only. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); /* * Set priority on all global interrupts. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); /* * Disable all interrupts. Leave the PPI and SGIs alone * as these enables are banked registers. */ - for (i = 32; i < max_irq; i += 32) + for (i = 32; i < gic_irqs; i += 32) writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); + /* + * Limit number of interrupts registered to the platform maximum + */ + irq_limit = gic_data[gic_nr].irq_offset + gic_irqs; + if (WARN_ON(irq_limit > NR_IRQS)) + irq_limit = NR_IRQS; + /* * Setup the Linux IRQ subsystem. */ - for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) { + for (i = irq_start; i < irq_limit; i++) { set_irq_chip(i, &gic_chip); set_irq_chip_data(i, &gic_data[gic_nr]); set_irq_handler(i, handle_level_irq); -- cgit v1.2.3-70-g09d2 From bc8b57f08c53344d13e3b5e644c56c0355899b47 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:21 +0100 Subject: ARM: 6497/1: kexec: Correct data alignment for CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/relocate_kernel.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index fd26f8d6515..9cf4cbf8f95 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -59,6 +59,8 @@ relocate_new_kernel: ldr r2,kexec_boot_atags mov pc,lr + .align + .globl kexec_start_address kexec_start_address: .long 0x0 -- cgit v1.2.3-70-g09d2 From 7eb25ebee894ba2f8a591a83e45accc091ced19f Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:22 +0100 Subject: ARM: 6498/1: vfp: Correct data alignment for CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/vfp/vfphw.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index d66cead97d2..9897dcfc16d 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -206,6 +206,7 @@ ENTRY(vfp_save_state) mov pc, lr ENDPROC(vfp_save_state) + .align last_VFP_context_address: .word last_VFP_context -- cgit v1.2.3-70-g09d2 From 077248fcce5edabb1b77ba3269e6c72341769d94 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:23 +0100 Subject: ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/boot/bootp/init.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S index 8b0de41c3dc..78b50807516 100644 --- a/arch/arm/boot/bootp/init.S +++ b/arch/arm/boot/bootp/init.S @@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time .size _start, . - _start + .align + .type data,#object data: .word initrd_start @ source initrd address .word initrd_phys @ destination initrd address -- cgit v1.2.3-70-g09d2 From 4f79a5dd7c3e316e2230dc0ee665c40a39023a81 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:24 +0100 Subject: ARM: 6500/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/head.S | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index dd6b369ac69..591c097c89a 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -262,6 +262,7 @@ __create_page_tables: mov pc, lr ENDPROC(__create_page_tables) .ltorg + .align __enable_mmu_loc: .long . .long __enable_mmu @@ -308,6 +309,8 @@ ENTRY(__secondary_switched) b secondary_start_kernel ENDPROC(__secondary_switched) + .align + .type __secondary_data, %object __secondary_data: .long . @@ -413,6 +416,7 @@ __fixup_smp_on_up: mov pc, lr ENDPROC(__fixup_smp) + .align 1: .word . .word __smpalt_begin .word __smpalt_end -- cgit v1.2.3-70-g09d2 From 6323875db20fd8ca8c8fbbd608bc377f2d4c8cf5 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:25 +0100 Subject: ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in mm/proc-v7.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. In this specific case, we can achieve the desired alignment by forcing a 32-bit branch instruction using the W() macro, since the assembler location counter is already 32-bit aligned in this case. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 53cbe222515..9b9ff5d949f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -381,7 +381,7 @@ __v7_ca9mp_proc_info: PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __v7_ca9mp_setup + W(b) __v7_ca9mp_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS @@ -413,7 +413,7 @@ __v7_proc_info: PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __v7_setup + W(b) __v7_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS -- cgit v1.2.3-70-g09d2 From bfa64c4ab1235b732542f11f4e0005e1774f779a Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:26 +0100 Subject: ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S Some instruction operand combinations are used here which are nor permitted in Thumb-2. In particular, most uses of pc as an operand are disallowed in Thumb-2, and deprecated in ARM from ARMv7 onwards. The modified code introduced by this patch should be compatible with all architecture versions >= v3, with or without CONFIG_THUMB2_KERNEL. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 9be21ba648c..be97e0832d7 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -174,7 +174,8 @@ not_angel: ldr sp, [r0, #28] #ifdef CONFIG_AUTO_ZRELADDR @ determine final kernel image address - and r4, pc, #0xf8000000 + mov r4, pc + and r4, r4, #0xf8000000 add r4, r4, #TEXT_OFFSET #else ldr r4, =zreladdr @@ -445,7 +446,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size */ mov r1, #0x1e orr r1, r1, #3 << 10 - mov r2, pc, lsr #20 + mov r2, pc + mov r2, r2, lsr #20 orr r1, r1, r2, lsl #20 add r0, r3, r2, lsl #2 str r1, [r0], #4 -- cgit v1.2.3-70-g09d2 From 26e5ca93dda9425f8ff78ccb2f9b193328087e45 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:27 +0100 Subject: ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL The code which makes up the zImage header intends to leave a 32-byte gap followed by a branch to the real entry point, a magic number, and a word containing the absolute entry point address. This gets messed up with with CONFIG_THUMB2_KERNEL, because the size of the initial padding NOPs changes. Instead, the header can be made fully compatible by restoring it to ARM. In the Thumb-2 case, we can replace the initial NOPs with a sequence which switches to Thumb and jumps to the real entry point. As a consequence, the zImage entry point is now always ARM, so no special magic is needed any more for the uImage rules in the Thumb-2 case. Signed-off-by: Dave Martin Acked-by: Catalin Marinas Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/boot/Makefile | 5 ----- arch/arm/boot/compressed/head.S | 7 ++++++- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 4a590f4113e..4d26f2c52a7 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -70,12 +70,7 @@ else $(obj)/uImage: LOADADDR=$(ZRELADDR) endif -ifeq ($(CONFIG_THUMB2_KERNEL),y) -# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode -$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/") -else $(obj)/uImage: STARTADDR=$(LOADADDR) -endif $(obj)/uImage: $(obj)/zImage FORCE $(call if_changed,uimage) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index be97e0832d7..7193884ed8b 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0 * sort out different calling conventions */ .align + .arm @ Always enter in ARM state start: .type start,#function - .rept 8 + THUMB( adr r12, BSYM(1f) ) + THUMB( bx r12 ) + THUMB( .rept 6 ) + ARM( .rept 8 ) mov r0, r0 .endr @@ -135,6 +139,7 @@ start: .word 0x016f2818 @ Magic numbers to help the loader .word start @ absolute load/run zImage address .word _edata @ zImage end address + THUMB( .thumb ) 1: mov r7, r1 @ save architecture ID mov r8, r2 @ save atags pointer -- cgit v1.2.3-70-g09d2 From a75e5248c51af1eaeed936be6bd3497b93f09685 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:28 +0100 Subject: ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2. The 32-bit conditional branches in Thumb-2 have a shorter range (+/-512K) than their ARM counterparts (+/-32MB). The linker does not currently generate trampolines to extend the range of these Thumb-2 conditional branches, resulting in link errors when vmlinux is sufficiently large, e.g.: head.o:(.text+0x464): relocation truncated to fit: R_ARM_THM_JUMP19 This patch forces the longer-range, unconditional branch encoding by use of an explicit IT instruction. The resulting branches are triggered on the same conditions as before. Signed-off-by: Dave Martin Signed-off-by: Russell King --- arch/arm/kernel/head.S | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 591c097c89a..6bd82d25683 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -85,9 +85,11 @@ ENTRY(stext) mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p @ yes, error 'p' bl __lookup_machine_type @ r5=machinfo movs r8, r5 @ invalid machine (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_a @ yes, error 'a' bl __vet_atags #ifdef CONFIG_SMP_ON_UP @@ -283,6 +285,7 @@ ENTRY(secondary_startup) bl __lookup_processor_type movs r10, r5 @ invalid processor? moveq r0, #'p' @ yes, error 'p' + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p /* -- cgit v1.2.3-70-g09d2 From 725ca4adaea07460accd4622d44bcc7eaa34da09 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Tue, 30 Nov 2010 13:04:36 +0100 Subject: ARM: 6507/1: RealView: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/headsmp.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S index 4075473cf68..b34be4554d4 100644 --- a/arch/arm/mach-realview/headsmp.S +++ b/arch/arm/mach-realview/headsmp.S @@ -35,5 +35,6 @@ pen: ldr r7, [r6] */ b secondary_startup + .align 1: .long . .long pen_release -- cgit v1.2.3-70-g09d2 From 618d9c8f9e554b5eaaca3f8e55a28e1a928a8571 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Tue, 30 Nov 2010 13:05:10 +0100 Subject: ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-vexpress/headsmp.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S index 8a78ff68e1e..7a3f0632947 100644 --- a/arch/arm/mach-vexpress/headsmp.S +++ b/arch/arm/mach-vexpress/headsmp.S @@ -35,5 +35,6 @@ pen: ldr r7, [r6] */ b secondary_startup + .align 1: .long . .long pen_release -- cgit v1.2.3-70-g09d2 From ed7c84d54837b182c5f56f821ef213c8ca817a91 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 29 Nov 2010 19:43:29 +0100 Subject: ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected Currently, the kprobes implementation for ARM only supports the ARM instruction set, so it only works if CONFIG_THUMB2_KERNEL is not enabled. Until kprobes is updated to work with Thumb-2, turning it on will cause horrible things to happen, so this patch disables it for now. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index db524e75c4a..f1d9297b105 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,7 +9,7 @@ config ARM select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB - select HAVE_KPROBES if (!XIP_KERNEL) + select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) -- cgit v1.2.3-70-g09d2 From b12a1e29af595d05612153bcb85258193bbf9382 Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Tue, 2 Nov 2010 14:55:34 +0100 Subject: regulator: regulator disable supply fix This patch fixes a disable failure when regulator supply is used. A while loop in regulator disable checks for supply pointer != NULL but the pointer is not always updated, resulting in the while loop running too many times causing a disable failure. Signed-off-by: Mattias Wallin Acked-by: Linus Walleij Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index f1d10c974cd..c6256332296 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1359,6 +1359,7 @@ static int _regulator_disable(struct regulator_dev *rdev, struct regulator_dev **supply_rdev_ptr) { int ret = 0; + *supply_rdev_ptr = NULL; if (WARN(rdev->use_count <= 0, "unbalanced disables for %s\n", -- cgit v1.2.3-70-g09d2 From 59c700cf20a6eefb68187df3468ffa0b11d5e9a4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 3 Nov 2010 00:08:04 -0400 Subject: regulator: Staticise mc13783_powermisc_rmw() It is not used outside this driver so no need to make the symbol global. Signed-off-by: Mark Brown Acked-by: Alberto Panizzo Signed-off-by: Liam Girdwood --- drivers/regulator/mc13783-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c index 4597d508a22..ecd99f59dba 100644 --- a/drivers/regulator/mc13783-regulator.c +++ b/drivers/regulator/mc13783-regulator.c @@ -465,8 +465,8 @@ static struct regulator_ops mc13783_fixed_regulator_ops = { .get_voltage = mc13783_fixed_regulator_get_voltage, }; -int mc13783_powermisc_rmw(struct mc13783_regulator_priv *priv, u32 mask, - u32 val) +static int mc13783_powermisc_rmw(struct mc13783_regulator_priv *priv, u32 mask, + u32 val) { struct mc13783 *mc13783 = priv->mc13783; int ret; -- cgit v1.2.3-70-g09d2 From aa7a74040a989eeb7a9265550a2538863e842a93 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 5 Nov 2010 15:25:12 +0800 Subject: regulator: Remove a redundant device_remove_file call in create_regulator We already have device_remove_file() in error path, no need to call it before goto link_name_err. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index c6256332296..c3f93b401e9 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1052,7 +1052,6 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, printk(KERN_WARNING "%s: could not add device link %s err %d\n", __func__, dev->kobj.name, err); - device_remove_file(dev, ®ulator->dev_attr); goto link_name_err; } } -- cgit v1.2.3-70-g09d2 From e36c1df8e18183ba2c691fe766a52c94020cdc5e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 5 Nov 2010 21:51:32 +0800 Subject: regulator: Ensure enough delay time for enabling regulator Integer division will truncate the result, this patch ensures we have enough delay time for enabling regulator. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index c3f93b401e9..9da85bc21db 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1312,10 +1312,12 @@ static int _regulator_enable(struct regulator_dev *rdev) if (ret < 0) return ret; - if (delay >= 1000) + if (delay >= 1000) { mdelay(delay / 1000); - else if (delay) + udelay(delay % 1000); + } else if (delay) { udelay(delay); + } } else if (ret < 0) { printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n", -- cgit v1.2.3-70-g09d2 From 7727da22e820a96ab394db2fc0ab58f7f7ecb323 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 5 Nov 2010 15:27:17 +0800 Subject: regulator: Return proper error for regulator_register() Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9da85bc21db..711fa1722bc 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2348,6 +2348,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, if (init_data->supply_regulator && init_data->supply_regulator_dev) { dev_err(dev, "Supply regulator specified by both name and dev\n"); + ret = -EINVAL; goto scrub; } @@ -2366,6 +2367,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, if (!found) { dev_err(dev, "Failed to find supply %s\n", init_data->supply_regulator); + ret = -ENODEV; goto scrub; } -- cgit v1.2.3-70-g09d2 From 3aa713e76e8f562c0d28faf18873c4f1836b17c9 Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Thu, 4 Nov 2010 11:01:31 +0100 Subject: regulator: lock supply in regulator enable This patch add locks around regulator supply enable. Signed-off-by: Mattias Wallin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 711fa1722bc..27d062e1395 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1269,7 +1269,9 @@ static int _regulator_enable(struct regulator_dev *rdev) /* do we need to enable the supply regulator first */ if (rdev->supply) { + mutex_lock(&rdev->supply->mutex); ret = _regulator_enable(rdev->supply); + mutex_unlock(&rdev->supply->mutex); if (ret < 0) { printk(KERN_ERR "%s: failed to enable %s: %d\n", __func__, rdev_get_name(rdev), ret); -- cgit v1.2.3-70-g09d2 From b9e26bc804e611d879353cd953cb17db1c52d307 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 22 Oct 2010 16:38:22 +0800 Subject: regulator: twl-regulator - fix twlreg_set_mode The Singular Message is 16 bits: DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] Current implementation return immedially after sucessfuly write MSB part. To properly set mode, we need to write the complete message ( MSB and LSB ). In twl.h, now we have defines for PM Master module register offsets, use it instead of hard coded 0x15/0x16. Use "message & 0xff" to ensure we send correct value for LSB. Signed-off-by: Axel Lin Acked-by: Mark Brown Tested-by: Lesly Arackal Manuel Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 7e5892efc43..a57262a4fa6 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -219,12 +219,12 @@ static int twlreg_set_mode(struct regulator_dev *rdev, unsigned mode) return -EACCES; status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, - message >> 8, 0x15 /* PB_WORD_MSB */ ); - if (status >= 0) + message >> 8, TWL4030_PM_MASTER_PB_WORD_MSB); + if (status < 0) return status; return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, - message, 0x16 /* PB_WORD_LSB */ ); + message & 0xff, TWL4030_PM_MASTER_PB_WORD_LSB); } /*----------------------------------------------------------------------*/ -- cgit v1.2.3-70-g09d2 From f3c18a87f3ddcfd31b16f689d01eb6adcc99de74 Mon Sep 17 00:00:00 2001 From: Bengt Jonsson Date: Wed, 10 Nov 2010 11:06:22 +0100 Subject: regulator: enable supply regulator only when use count is zero Supply regulators are disabled only when the last reference count is removed on the child regulator (the use count goes from 1 to 0). This patch changes the behaviour of enable so the supply regulator is enabled only when the use count of the child regulator goes from 0 to 1. Signed-off-by: Bengt Jonsson Acked-by: Linus Walleij Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 27d062e1395..c577c6d344a 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1267,15 +1267,17 @@ static int _regulator_enable(struct regulator_dev *rdev) { int ret, delay; - /* do we need to enable the supply regulator first */ - if (rdev->supply) { - mutex_lock(&rdev->supply->mutex); - ret = _regulator_enable(rdev->supply); - mutex_unlock(&rdev->supply->mutex); - if (ret < 0) { - printk(KERN_ERR "%s: failed to enable %s: %d\n", - __func__, rdev_get_name(rdev), ret); - return ret; + if (rdev->use_count == 0) { + /* do we need to enable the supply regulator first */ + if (rdev->supply) { + mutex_lock(&rdev->supply->mutex); + ret = _regulator_enable(rdev->supply); + mutex_unlock(&rdev->supply->mutex); + if (ret < 0) { + printk(KERN_ERR "%s: failed to enable %s: %d\n", + __func__, rdev_get_name(rdev), ret); + return ret; + } } } -- cgit v1.2.3-70-g09d2 From 06c63f9396133f312c5a49c2285c2c8015e80934 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 18 Nov 2010 15:02:26 -0800 Subject: regulator: fix kernel-doc for set_consumer_device_supply Fix kernel-doc warning for set_consumer_device_supply(): Warning(drivers/regulator/core.c:912): missing initial short description on line: * set_consumer_device_supply: Bind a regulator to a symbolic supply Signed-off-by: Randy Dunlap Cc: Liam Girdwood Cc: Mark Brown Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index c577c6d344a..ba521f0f0fa 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -911,7 +911,7 @@ out: } /** - * set_consumer_device_supply: Bind a regulator to a symbolic supply + * set_consumer_device_supply - Bind a regulator to a symbolic supply * @rdev: regulator source * @consumer_dev: device the supply applies to * @consumer_dev_name: dev_name() string for device supply applies to -- cgit v1.2.3-70-g09d2 From d9d318d39dd5cb686660504a3565aac453709ccc Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 30 Nov 2010 16:39:27 +0100 Subject: fuse: fix ioctl when server is 32bit If a 32bit CUSE server is run on 64bit this results in EIO being returned to the caller. The reason is that FUSE_IOCTL_RETRY reply was defined to use 'struct iovec', which is different on 32bit and 64bit archs. Work around this by looking at the size of the reply to determine which struct was used. This is only needed if CONFIG_COMPAT is defined. A more permanent fix for the interface will be to use the same struct on both 32bit and 64bit. Reported-by: "ccmail111" Signed-off-by: Miklos Szeredi CC: Tejun Heo CC: [2.6.31+] --- fs/fuse/file.c | 50 ++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 44 insertions(+), 6 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 9242d294fe9..0e2e25b114a 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -13,6 +13,7 @@ #include #include #include +#include static const struct file_operations fuse_direct_io_file_operations; @@ -1627,6 +1628,44 @@ static int fuse_ioctl_copy_user(struct page **pages, struct iovec *iov, return 0; } +/* + * CUSE servers compiled on 32bit broke on 64bit kernels because the + * ABI was defined to be 'struct iovec' which is different on 32bit + * and 64bit. Fortunately we can determine which structure the server + * used from the size of the reply. + */ +static int fuse_copy_ioctl_iovec(struct iovec *dst, void *src, + size_t transferred, unsigned count, + bool is_compat) +{ +#ifdef CONFIG_COMPAT + if (count * sizeof(struct compat_iovec) == transferred) { + struct compat_iovec *ciov = src; + unsigned i; + + /* + * With this interface a 32bit server cannot support + * non-compat (i.e. ones coming from 64bit apps) ioctl + * requests + */ + if (!is_compat) + return -EINVAL; + + for (i = 0; i < count; i++) { + dst[i].iov_base = compat_ptr(ciov[i].iov_base); + dst[i].iov_len = ciov[i].iov_len; + } + return 0; + } +#endif + + if (count * sizeof(struct iovec) != transferred) + return -EIO; + + memcpy(dst, src, transferred); + return 0; +} + /* * For ioctls, there is no generic way to determine how much memory * needs to be read and/or written. Furthermore, ioctls are allowed @@ -1808,14 +1847,13 @@ long fuse_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg, in_iovs + out_iovs > FUSE_IOCTL_MAX_IOV) goto out; - err = -EIO; - if ((in_iovs + out_iovs) * sizeof(struct iovec) != transferred) - goto out; - - /* okay, copy in iovs and retry */ vaddr = kmap_atomic(pages[0], KM_USER0); - memcpy(page_address(iov_page), vaddr, transferred); + err = fuse_copy_ioctl_iovec(page_address(iov_page), vaddr, + transferred, in_iovs + out_iovs, + (flags & FUSE_IOCTL_COMPAT) != 0); kunmap_atomic(vaddr, KM_USER0); + if (err) + goto out; in_iov = page_address(iov_page); out_iov = in_iov + in_iovs; -- cgit v1.2.3-70-g09d2 From 7572777eef78ebdee1ecb7c258c0ef94d35bad16 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 30 Nov 2010 16:39:27 +0100 Subject: fuse: verify ioctl retries Verify that the total length of the iovec returned in FUSE_IOCTL_RETRY doesn't overflow iov_length(). Signed-off-by: Miklos Szeredi CC: Tejun Heo CC: [2.6.31+] --- fs/fuse/file.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 0e2e25b114a..8b984a2cebb 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1666,6 +1666,20 @@ static int fuse_copy_ioctl_iovec(struct iovec *dst, void *src, return 0; } +/* Make sure iov_length() won't overflow */ +static int fuse_verify_ioctl_iov(struct iovec *iov, size_t count) +{ + size_t n; + u32 max = FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT; + + for (n = 0; n < count; n++) { + if (iov->iov_len > (size_t) max) + return -ENOMEM; + max -= iov->iov_len; + } + return 0; +} + /* * For ioctls, there is no generic way to determine how much memory * needs to be read and/or written. Furthermore, ioctls are allowed @@ -1858,6 +1872,14 @@ long fuse_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg, in_iov = page_address(iov_page); out_iov = in_iov + in_iovs; + err = fuse_verify_ioctl_iov(in_iov, in_iovs); + if (err) + goto out; + + err = fuse_verify_ioctl_iov(out_iov, out_iovs); + if (err) + goto out; + goto retry; } -- cgit v1.2.3-70-g09d2 From 8ae8cd978bc773e916e0b51a76fe3f096fa31069 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 19 Nov 2010 22:23:28 +0800 Subject: at91: Convert remaining boards to new-style UART initialization Convert the following AT91RM9200-based boards to the new-style UART initialization: - Ajeco 1ARM Single Board Computer - Sperry-Sun KAFA board - picotux 200 Remove the deprecated at91_init_serial Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Andrew Victor --- arch/arm/mach-at91/at91rm9200_devices.c | 45 --------------------------------- arch/arm/mach-at91/board-1arm.c | 26 +++++++++---------- arch/arm/mach-at91/board-kafa.c | 21 ++++++--------- arch/arm/mach-at91/board-picotux200.c | 23 ++++++++--------- arch/arm/mach-at91/include/mach/board.h | 6 ----- 5 files changed, 31 insertions(+), 90 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 9338825cfcd..7b539228e0e 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins) static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91rm9200_uart0_device; - at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); - at91_uarts[i] = &at91rm9200_uart1_device; - at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91rm9200_uart2_device; - at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); - break; - case 3: - configure_usart3_pins(0); - at91_uarts[i] = &at91rm9200_uart3_device; - at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); - break; - case 4: - configure_dbgu_pins(); - at91_uarts[i] = &at91rm9200_dbgu_device; - at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 46bdc82d3fb..8a3fc84847c 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,24 +39,24 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata onearm_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 3, - .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */ -}; - static void __init onearm_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); - /* Setup the serial ports and console */ - at91_init_serial(&onearm_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init onearm_init_irq(void) diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index c0ce79d431a..d2e1f4ec1fc 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,17 +39,6 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata kafa_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init kafa_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ @@ -58,8 +47,14 @@ static void __init kafa_map_io(void) /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); - /* Setup the serial ports and console */ - at91_init_serial(&kafa_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init kafa_init_irq(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 9d833bbc592..ac1a3b527b3 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,24 +43,21 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata picotux200_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init picotux200_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); - /* Setup the serial ports and console */ - at91_init_serial(&picotux200_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init picotux200_init_irq(void) diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 58528aa9c8a..2b499eb343a 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); extern void __init at91_set_serial_console(unsigned portnr); -struct at91_uart_config { - unsigned short console_tty; /* tty number of serial console */ - unsigned short nr_tty; /* number of serial tty's */ - short tty_map[]; /* map UART to tty number */ -}; extern struct platform_device *atmel_default_console_device; -extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ -- cgit v1.2.3-70-g09d2 From 8e79d2d4e7147eb6dfd075d7cb200c666566a9e0 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 19 Nov 2010 22:31:03 +0800 Subject: at91rm9200dk: fix warning: 'dk_mmc_data' defined but not used Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Andrew Victor --- arch/arm/mach-at91/board-dk.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index e14f0e16568..16dfd0c3847 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = { // .vcc_pin = ... always powered }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata dk_mmc_data = { .slot_b = 0, .wire4 = 1, }; +#endif static struct spi_board_info dk_spi_devices[] = { { /* DataFlash chip */ -- cgit v1.2.3-70-g09d2 From 55d83b0a6eb61d159a4a6d269745ee019f9f5f91 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 19 Nov 2010 22:31:35 +0800 Subject: at91rm9200ek: fix warning: 'ek_mmc_data' defined but not used Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Andrew Victor --- arch/arm/mach-at91/board-ek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c index 56e92c4bbc2..6203cdff357 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-ek.c @@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = { .pullup_pin = AT91_PIN_PD5, }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata ek_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PA17, }; +#endif static struct spi_board_info ek_spi_devices[] = { { /* DataFlash chip */ -- cgit v1.2.3-70-g09d2 From 985f554d8f0c2cf5bda5720921cb48654420d6b1 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 19 Nov 2010 22:34:38 +0800 Subject: at91: rename rm9200ek and rm9200dk board file name to be a few more concistant with the other boards as ek is for evaluation kit and dk for development kit Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Andrew Victor --- arch/arm/mach-at91/Makefile | 4 +- arch/arm/mach-at91/board-dk.c | 235 ------------------------------------ arch/arm/mach-at91/board-ek.c | 201 ------------------------------ arch/arm/mach-at91/board-rm9200dk.c | 235 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-at91/board-rm9200ek.c | 201 ++++++++++++++++++++++++++++++ 5 files changed, 438 insertions(+), 438 deletions(-) delete mode 100644 arch/arm/mach-at91/board-dk.c delete mode 100644 arch/arm/mach-at91/board-ek.c create mode 100644 arch/arm/mach-at91/board-rm9200dk.c create mode 100644 arch/arm/mach-at91/board-rm9200ek.c diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 821eb842795..62d686f0b42 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support obj-$(CONFIG_MACH_ONEARM) += board-1arm.o -obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o -obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o +obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o +obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o obj-$(CONFIG_MACH_CSB337) += board-csb337.o obj-$(CONFIG_MACH_CSB637) += board-csb637.o obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c deleted file mode 100644 index 16dfd0c3847..00000000000 --- a/arch/arm/mach-at91/board-dk.c +++ /dev/null @@ -1,235 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-dk.c - * - * Copyright (C) 2005 SAN People - * - * Epson S1D framebuffer glue code is: - * Copyright (C) 2005 Thibaut VARENE - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "generic.h" - - -static void __init dk_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init dk_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - -static struct at91_eth_data __initdata dk_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata dk_usbh_data = { - .ports = 2, -}; - -static struct at91_udc_data __initdata dk_udc_data = { - .vbus_pin = AT91_PIN_PD4, - .pullup_pin = AT91_PIN_PD5, -}; - -static struct at91_cf_data __initdata dk_cf_data = { - .det_pin = AT91_PIN_PB0, - .rst_pin = AT91_PIN_PC5, - // .irq_pin = ... not connected - // .vcc_pin = ... always powered -}; - -#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD -static struct at91_mmc_data __initdata dk_mmc_data = { - .slot_b = 0, - .wire4 = 1, -}; -#endif - -static struct spi_board_info dk_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - }, - { /* UR6HCPS2-SP40 PS2-to-SPI adapter */ - .modalias = "ur6hcps2", - .chip_select = 1, - .max_speed_hz = 250 * 1000, - }, - { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */ - .modalias = "tlv1504", - .chip_select = 2, - .max_speed_hz = 20 * 1000 * 1000, - }, -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 3, - .max_speed_hz = 15 * 1000 * 1000, - } -#endif -}; - -static struct i2c_board_info __initdata dk_i2c_devices[] = { - { - I2C_BOARD_INFO("ics1523", 0x26), - }, - { - I2C_BOARD_INFO("x9429", 0x28), - }, - { - I2C_BOARD_INFO("24c1024", 0x50), - } -}; - -static struct mtd_partition __initdata dk_nand_partition[] = { - { - .name = "NAND Partition 1", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(dk_nand_partition); - return dk_nand_partition; -} - -static struct atmel_nand_data __initdata dk_nand_data = { - .ale = 22, - .cle = 21, - .det_pin = AT91_PIN_PB1, - .rdy_pin = AT91_PIN_PC2, - // .enable_pin = ... not there - .partition_info = nand_partitions, -}; - -#define DK_FLASH_BASE AT91_CHIPSELECT_0 -#define DK_FLASH_SIZE SZ_2M - -static struct physmap_flash_data dk_flash_data = { - .width = 2, -}; - -static struct resource dk_flash_resource = { - .start = DK_FLASH_BASE, - .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device dk_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &dk_flash_data, - }, - .resource = &dk_flash_resource, - .num_resources = 1, -}; - -static struct gpio_led dk_leds[] = { - { - .name = "led0", - .gpio = AT91_PIN_PB2, - .active_low = 1, - .default_trigger = "heartbeat", - } -}; - -static void __init dk_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&dk_eth_data); - /* USB Host */ - at91_add_device_usbh(&dk_usbh_data); - /* USB Device */ - at91_add_device_udc(&dk_udc_data); - at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ - /* Compact Flash */ - at91_add_device_cf(&dk_cf_data); - /* I2C */ - at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices)); - /* SPI */ - at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB7, 0); -#else - /* MMC */ - at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &dk_mmc_data); -#endif - /* NAND */ - at91_add_device_nand(&dk_nand_data); - /* NOR Flash */ - platform_device_register(&dk_flash); - /* LEDs */ - at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); - /* VGA */ -// dk_add_device_video(); -} - -MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") - /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91rm9200_timer, - .map_io = dk_map_io, - .init_irq = dk_init_irq, - .init_machine = dk_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c deleted file mode 100644 index 6203cdff357..00000000000 --- a/arch/arm/mach-at91/board-ek.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-ek.c - * - * Copyright (C) 2005 SAN People - * - * Epson S1D framebuffer glue code is: - * Copyright (C) 2005 Thibaut VARENE - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "generic.h" - - -static void __init ek_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init ek_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - -static struct at91_eth_data __initdata ek_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, -}; - -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PD4, - .pullup_pin = AT91_PIN_PD5, -}; - -#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD -static struct at91_mmc_data __initdata ek_mmc_data = { - .det_pin = AT91_PIN_PB27, - .slot_b = 0, - .wire4 = 1, - .wp_pin = AT91_PIN_PA17, -}; -#endif - -static struct spi_board_info ek_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - }, -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 3, - .max_speed_hz = 15 * 1000 * 1000, - }, -#endif -}; - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("ics1523", 0x26), - }, - { - I2C_BOARD_INFO("dac3550", 0x4d), - } -}; - -#define EK_FLASH_BASE AT91_CHIPSELECT_0 -#define EK_FLASH_SIZE SZ_2M - -static struct physmap_flash_data ek_flash_data = { - .width = 2, -}; - -static struct resource ek_flash_resource = { - .start = EK_FLASH_BASE, - .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ek_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ek_flash_data, - }, - .resource = &ek_flash_resource, - .num_resources = 1, -}; - -static struct gpio_led ek_leds[] = { - { /* "user led 1", DS2 */ - .name = "green", - .gpio = AT91_PIN_PB0, - .active_low = 1, - .default_trigger = "mmc0", - }, - { /* "user led 2", DS4 */ - .name = "yellow", - .gpio = AT91_PIN_PB1, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* "user led 3", DS6 */ - .name = "red", - .gpio = AT91_PIN_PB2, - .active_low = 1, - } -}; - -static void __init ek_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&ek_eth_data); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB22, 0); -#else - /* MMC */ - at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &ek_mmc_data); -#endif - /* NOR Flash */ - platform_device_register(&ek_flash); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* VGA */ -// ek_add_device_video(); -} - -MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") - /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91rm9200_timer, - .map_io = ek_map_io, - .init_irq = ek_init_irq, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c new file mode 100644 index 00000000000..4c1047c8200 --- /dev/null +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -0,0 +1,235 @@ +/* + * linux/arch/arm/mach-at91/board-rm9200dk.c + * + * Copyright (C) 2005 SAN People + * + * Epson S1D framebuffer glue code is: + * Copyright (C) 2005 Thibaut VARENE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include "generic.h" + + +static void __init dk_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_BGA); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init dk_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata dk_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata dk_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata dk_udc_data = { + .vbus_pin = AT91_PIN_PD4, + .pullup_pin = AT91_PIN_PD5, +}; + +static struct at91_cf_data __initdata dk_cf_data = { + .det_pin = AT91_PIN_PB0, + .rst_pin = AT91_PIN_PC5, + // .irq_pin = ... not connected + // .vcc_pin = ... always powered +}; + +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD +static struct at91_mmc_data __initdata dk_mmc_data = { + .slot_b = 0, + .wire4 = 1, +}; +#endif + +static struct spi_board_info dk_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + }, + { /* UR6HCPS2-SP40 PS2-to-SPI adapter */ + .modalias = "ur6hcps2", + .chip_select = 1, + .max_speed_hz = 250 * 1000, + }, + { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */ + .modalias = "tlv1504", + .chip_select = 2, + .max_speed_hz = 20 * 1000 * 1000, + }, +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 3, + .max_speed_hz = 15 * 1000 * 1000, + } +#endif +}; + +static struct i2c_board_info __initdata dk_i2c_devices[] = { + { + I2C_BOARD_INFO("ics1523", 0x26), + }, + { + I2C_BOARD_INFO("x9429", 0x28), + }, + { + I2C_BOARD_INFO("24c1024", 0x50), + } +}; + +static struct mtd_partition __initdata dk_nand_partition[] = { + { + .name = "NAND Partition 1", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(dk_nand_partition); + return dk_nand_partition; +} + +static struct atmel_nand_data __initdata dk_nand_data = { + .ale = 22, + .cle = 21, + .det_pin = AT91_PIN_PB1, + .rdy_pin = AT91_PIN_PC2, + // .enable_pin = ... not there + .partition_info = nand_partitions, +}; + +#define DK_FLASH_BASE AT91_CHIPSELECT_0 +#define DK_FLASH_SIZE SZ_2M + +static struct physmap_flash_data dk_flash_data = { + .width = 2, +}; + +static struct resource dk_flash_resource = { + .start = DK_FLASH_BASE, + .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device dk_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &dk_flash_data, + }, + .resource = &dk_flash_resource, + .num_resources = 1, +}; + +static struct gpio_led dk_leds[] = { + { + .name = "led0", + .gpio = AT91_PIN_PB2, + .active_low = 1, + .default_trigger = "heartbeat", + } +}; + +static void __init dk_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&dk_eth_data); + /* USB Host */ + at91_add_device_usbh(&dk_usbh_data); + /* USB Device */ + at91_add_device_udc(&dk_udc_data); + at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ + /* Compact Flash */ + at91_add_device_cf(&dk_cf_data); + /* I2C */ + at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices)); + /* SPI */ + at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices)); +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card */ + at91_set_gpio_output(AT91_PIN_PB7, 0); +#else + /* MMC */ + at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ + at91_add_device_mmc(0, &dk_mmc_data); +#endif + /* NAND */ + at91_add_device_nand(&dk_nand_data); + /* NOR Flash */ + platform_device_register(&dk_flash); + /* LEDs */ + at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); + /* VGA */ +// dk_add_device_video(); +} + +MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") + /* Maintainer: SAN People/Atmel */ + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = dk_map_io, + .init_irq = dk_init_irq, + .init_machine = dk_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c new file mode 100644 index 00000000000..9df1be8818c --- /dev/null +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -0,0 +1,201 @@ +/* + * linux/arch/arm/mach-at91/board-rm9200ek.c + * + * Copyright (C) 2005 SAN People + * + * Epson S1D framebuffer glue code is: + * Copyright (C) 2005 Thibaut VARENE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include "generic.h" + + +static void __init ek_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_BGA); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init ek_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata ek_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata ek_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata ek_udc_data = { + .vbus_pin = AT91_PIN_PD4, + .pullup_pin = AT91_PIN_PD5, +}; + +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD +static struct at91_mmc_data __initdata ek_mmc_data = { + .det_pin = AT91_PIN_PB27, + .slot_b = 0, + .wire4 = 1, + .wp_pin = AT91_PIN_PA17, +}; +#endif + +static struct spi_board_info ek_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + }, +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 3, + .max_speed_hz = 15 * 1000 * 1000, + }, +#endif +}; + +static struct i2c_board_info __initdata ek_i2c_devices[] = { + { + I2C_BOARD_INFO("ics1523", 0x26), + }, + { + I2C_BOARD_INFO("dac3550", 0x4d), + } +}; + +#define EK_FLASH_BASE AT91_CHIPSELECT_0 +#define EK_FLASH_SIZE SZ_2M + +static struct physmap_flash_data ek_flash_data = { + .width = 2, +}; + +static struct resource ek_flash_resource = { + .start = EK_FLASH_BASE, + .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ek_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ek_flash_data, + }, + .resource = &ek_flash_resource, + .num_resources = 1, +}; + +static struct gpio_led ek_leds[] = { + { /* "user led 1", DS2 */ + .name = "green", + .gpio = AT91_PIN_PB0, + .active_low = 1, + .default_trigger = "mmc0", + }, + { /* "user led 2", DS4 */ + .name = "yellow", + .gpio = AT91_PIN_PB1, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* "user led 3", DS6 */ + .name = "red", + .gpio = AT91_PIN_PB2, + .active_low = 1, + } +}; + +static void __init ek_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&ek_eth_data); + /* USB Host */ + at91_add_device_usbh(&ek_usbh_data); + /* USB Device */ + at91_add_device_udc(&ek_udc_data); + at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ + /* I2C */ + at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); + /* SPI */ + at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card */ + at91_set_gpio_output(AT91_PIN_PB22, 0); +#else + /* MMC */ + at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ + at91_add_device_mmc(0, &ek_mmc_data); +#endif + /* NOR Flash */ + platform_device_register(&ek_flash); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + /* VGA */ +// ek_add_device_video(); +} + +MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") + /* Maintainer: SAN People/Atmel */ + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = ek_map_io, + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END -- cgit v1.2.3-70-g09d2 From 82d5b5c8da769184a9bc2cc2adc90555f4aa90b0 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 21 Nov 2010 10:31:19 +0800 Subject: at91/picotux200: remove commenting usb device and dataflash support as based on http://www.picotux.com/pt200/picotux200.pdf these board does not have such I/O Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/board-picotux200.c | 30 ------------------------------ 1 file changed, 30 deletions(-) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index ac1a3b527b3..55dad3a4654 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -74,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = { .ports = 1, }; -// static struct at91_udc_data __initdata picotux200_udc_data = { -// .vbus_pin = AT91_PIN_PD4, -// .pullup_pin = AT91_PIN_PD5, -// }; - static struct at91_mmc_data __initdata picotux200_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, @@ -86,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = { .wp_pin = AT91_PIN_PA17, }; -// static struct spi_board_info picotux200_spi_devices[] = { -// { /* DataFlash chip */ -// .modalias = "mtd_dataflash", -// .chip_select = 0, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD -// { /* DataFlash card */ -// .modalias = "mtd_dataflash", -// .chip_select = 3, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #endif -// }; - #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 #define PICOTUX200_FLASH_SIZE SZ_4M @@ -132,21 +112,11 @@ static void __init picotux200_board_init(void) at91_add_device_eth(&picotux200_eth_data); /* USB Host */ at91_add_device_usbh(&picotux200_usbh_data); - /* USB Device */ - // at91_add_device_udc(&picotux200_udc_data); - // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ /* I2C */ at91_add_device_i2c(NULL, 0); - /* SPI */ - // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB22, 0); -#else /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(0, &picotux200_mmc_data); -#endif /* NOR Flash */ platform_device_register(&picotux200_flash); } -- cgit v1.2.3-70-g09d2 From 214b574ab81236e7740243985d63a1d6a61231a2 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 20 Nov 2010 14:52:53 +0800 Subject: atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer' passing argument 2 of 'dma_map_single' discards qualifiers from pointer target type Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- drivers/spi/atmel_spi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 154529aacc0..a067046c9da 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -352,8 +352,12 @@ atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer) xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS; if (xfer->tx_buf) { + /* tx_buf is a const void* where we need a void * for the dma + * mapping */ + void *nonconst_tx = (void *)xfer->tx_buf; + xfer->tx_dma = dma_map_single(dev, - (void *) xfer->tx_buf, xfer->len, + nonconst_tx, xfer->len, DMA_TO_DEVICE); if (dma_mapping_error(dev, xfer->tx_dma)) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From 3b24f0950bc55ca604a9f0da3ca894f9315cb573 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 21 Nov 2010 11:24:07 +0800 Subject: at91/board-yl-9200: fix typo in video support for the epson frambuffer support it's CONFIG_FB_S1D13XXX not CONFIG_FB_S1D135XX Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/board-yl-9200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 89df00a9d2f..e0f0080eb63 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = { * EPSON S1D13806 FB (discontinued chip) * EPSON S1D13506 FB */ -#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE) +#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) #include