From b882fc1b03d46e67ffe06133f4f4532db6e8dd0d Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 28 Jul 2011 08:50:38 +0900 Subject: serial: samsung: Fix build error drivers/tty/serial/samsung.c: In function 's3c24xx_serial_init': drivers/tty/serial/samsung.c:1237: error: lvalue required as unary '&' operand Cc: Greg Kroah-Hartman Signed-off-by: Kukjin Kim Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index afc62942315..6edafb5ace1 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1225,15 +1225,19 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = { .suspend = s3c24xx_serial_suspend, .resume = s3c24xx_serial_resume, }; +#define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops) + #else /* !CONFIG_PM_SLEEP */ -#define s3c24xx_serial_pm_ops NULL + +#define SERIAL_SAMSUNG_PM_OPS NULL #endif /* CONFIG_PM_SLEEP */ int s3c24xx_serial_init(struct platform_driver *drv, struct s3c24xx_uart_info *info) { dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); - drv->driver.pm = &s3c24xx_serial_pm_ops; + + drv->driver.pm = SERIAL_SAMSUNG_PM_OPS; return platform_driver_register(drv); } -- cgit v1.2.3-70-g09d2 From 6c4b47d243112e98811ce0da7bbb32cc3857dd1a Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 20 Jul 2011 20:17:49 +0900 Subject: pch_uart: Set PCIe bus number using probe parameter Currently, PCIe bus number is set as fixed value "2". However, PCIe bus number is not always "2". This patch sets bus number using probe() parameter. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 846dfcd3ce0..b46218d679e 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -598,7 +598,8 @@ static void pch_request_dma(struct uart_port *port) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev + dma_dev = pci_get_bus_and_slot(priv->pdev->bus->number, + PCI_DEVFN(0xa, 0)); /* Get DMA's dev information */ /* Set Tx DMA */ param = &priv->param_tx; -- cgit v1.2.3-70-g09d2 From 181d5762bd8eaa2881b7df27bad260bf4abda1bc Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 4 Aug 2011 03:13:10 -0500 Subject: drivers/serial/ucc_uart.c: Fix compiler warning drivers/tty/serial/ucc_uart.c: In function 'qe2cpu_addr': drivers/tty/serial/ucc_uart.c:238:2: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'dma_addr_t' Signed-off-by: Kumar Gala Acked-by: Timur Tabi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ucc_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index c327218cad4..9af9f0879a2 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -235,7 +235,7 @@ static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port) return qe_port->bd_virt + (addr - qe_port->bd_dma_addr); /* something nasty happened */ - printk(KERN_ERR "%s: addr=%x\n", __func__, addr); + printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr); BUG(); return NULL; } -- cgit v1.2.3-70-g09d2 From ab8ba3a2d2cba6a658ef596cd5b2e0905b6c8a9f Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 16 Aug 2011 12:02:28 -0600 Subject: serial: 8250_pnp: add Intermec CV60 touchscreen device It would have been nice if Intermec had supplied a PNP0501 _CID for the COM3 device, but they didn't, so we have to recognize it explicitly. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=40612 CC: Jeff Chua Signed-off-by: Bjorn Helgaas Cc: stable Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250_pnp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250_pnp.c index fc301f6722e..a2f236510ff 100644 --- a/drivers/tty/serial/8250_pnp.c +++ b/drivers/tty/serial/8250_pnp.c @@ -109,6 +109,9 @@ static const struct pnp_device_id pnp_dev_table[] = { /* IBM */ /* IBM Thinkpad 701 Internal Modem Voice */ { "IBM0033", 0 }, + /* Intermec */ + /* Intermec CV60 touchscreen port */ + { "PNP4972", 0 }, /* Intertex */ /* Intertex 28k8 33k6 Voice EXT PnP */ { "IXDC801", 0 }, -- cgit v1.2.3-70-g09d2 From 0d0a3cc183c50956fe1d9e37cca520debea93ad5 Mon Sep 17 00:00:00 2001 From: "Voss, Nikolaus" Date: Wed, 10 Aug 2011 14:02:29 +0200 Subject: atmel_serial: fix atmel_default_console_device reflect new static uart platform ids introduced by patch http://article.gmane.org/gmane.linux.kernel/1126105 Signed-off-by: Nikolaus Voss Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index af9b7814965..b922f5d2e61 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1609,9 +1609,11 @@ static struct console atmel_console = { static int __init atmel_console_init(void) { if (atmel_default_console_device) { - add_preferred_console(ATMEL_DEVICENAME, - atmel_default_console_device->id, NULL); - atmel_init_port(&atmel_ports[atmel_default_console_device->id], + struct atmel_uart_data *pdata = + atmel_default_console_device->dev.platform_data; + + add_preferred_console(ATMEL_DEVICENAME, pdata->num, NULL); + atmel_init_port(&atmel_ports[pdata->num], atmel_default_console_device); register_console(&atmel_console); } -- cgit v1.2.3-70-g09d2 From 8c4074cd2254606aeb788d518ccc27c9f97129e1 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 1 Aug 2011 21:20:10 +0800 Subject: tty: Add "spi:" prefix for spi modalias Since commit e0626e38 (spi: prefix modalias with "spi:"), the spi modalias is prefixed with "spi:". This patch adds "spi:" prefix and removes "-spi" suffix in the modalias. Signed-off-by: Axel Lin Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/max3107-aava.c | 2 +- drivers/tty/serial/max3107.c | 2 +- drivers/tty/serial/mrst_max3110.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c index a1fe304f2f5..d73aadd7a9a 100644 --- a/drivers/tty/serial/max3107-aava.c +++ b/drivers/tty/serial/max3107-aava.c @@ -340,5 +340,5 @@ module_exit(max3107_exit); MODULE_DESCRIPTION("MAX3107 driver"); MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("aava-max3107-spi"); +MODULE_ALIAS("spi:aava-max3107"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c index 750b4f62731..a8164601c0e 100644 --- a/drivers/tty/serial/max3107.c +++ b/drivers/tty/serial/max3107.c @@ -1209,5 +1209,5 @@ module_exit(max3107_exit); MODULE_DESCRIPTION("MAX3107 driver"); MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("max3107-spi"); +MODULE_ALIAS("spi:max3107"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index a764bf99743..23bc743f2a2 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -917,4 +917,4 @@ module_init(serial_m3110_init); module_exit(serial_m3110_exit); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("max3110-uart"); +MODULE_ALIAS("spi:max3110-uart"); -- cgit v1.2.3-70-g09d2 From 44178176ecc55ad370b837dd2c4b4b8bed1e3823 Mon Sep 17 00:00:00 2001 From: Eric Smith Date: Mon, 11 Jul 2011 22:53:13 -0600 Subject: 8250_pci: add support for Rosewill RC-305 4x serial port card This patch adds support for the Rosewill RC-305 four-port PCI serial card, and probably any other four-port serial cards based on the Moschip MCS9865 chip, assuming that the EEPROM on the card was programmed in accordance with Table 6 of the MCS9865 EEPROM Application Note version 0.3 dated 16-May-2008, available from the Moschip web site (registration required). This patch is based on an earlier patch [1] for the SYBA 6x serial port card by Ira W. Snyder. [1]: http://www.gossamer-threads.com/lists/linux/kernel/1162435 Signed-off-by: Eric Smith Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250_pci.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 6b887d90a20..f652a7b8913 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -4021,13 +4021,17 @@ static struct pci_device_id serial_pci_tbl[] = { 0, 0, pbn_NETMOS9900_2s_115200 }, /* - * Best Connectivity PCI Multi I/O cards + * Best Connectivity and Rosewill PCI Multi I/O cards */ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 0xA000, 0x1000, 0, 0, pbn_b0_1_115200 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3002, + 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 0xA000, 0x3004, 0, 0, pbn_b0_bt_4_115200 }, -- cgit v1.2.3-70-g09d2 From dacacc3e794c4c5bab05d97afc19e372e1877943 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Tue, 12 Jul 2011 16:08:49 +0900 Subject: serial/8250_pci: delete duplicate data definition Data definiton "VendorID=10DB, device_id=800D" is already defined. This patch deletes the duplicate definition. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250_pci.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index f652a7b8913..3abeca2a2a1 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -1599,11 +1599,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .device = 0x800D, .init = pci_eg20t_init, }, - { - .vendor = 0x10DB, - .device = 0x800D, - .init = pci_eg20t_init, - }, /* * Cronyx Omega PCI (PLX-chip based) */ -- cgit v1.2.3-70-g09d2 From dbb3b1ca5609d1f3848cd387d06cc60aaacf7f98 Mon Sep 17 00:00:00 2001 From: Al Cooper Date: Mon, 25 Jul 2011 16:19:52 -0400 Subject: 8250: Fix race condition in serial8250_backup_timeout(). This is to fix an issue where output will suddenly become very slow. The problem occurs on 8250 UARTS with the hardware bug UART_BUG_THRE. BACKGROUND For normal UARTs (without UART_BUG_THRE): When the serial core layer gets new transmit data and the transmitter is idle, it buffers the data and calls the 8250s' serial8250_start_tx() routine which will simply enable the TX interrupt in the IER register and return. This should immediately fire a THRE interrupt and begin transmitting the data. For buggy UARTs (with UART_BUG_THRE): merely enabling the TX interrupt in IER does not necessarily generate a new THRE interrupt. Therefore, a background timer periodically checks to see if there is pending data, and starts transmission if that is the case. The bug happens on SMP systems when the system has nothing to transmit, the transmit interrupt is disabled and the following sequence occurs: - CPU0: The background timer routine serial8250_backup_timeout() starts and saves the state of the interrupt enable register (IER) and then disables all interrupts in IER. NOTE: The transmit interrupt (TI) bit is saved as disabled. - CPU1: The serial core gets data to transmit, grabs the port lock and calls serial8250_start_tx() which enables the TI in IER. - CPU0: serial8250_backup_timeout() waits for the port lock. - CPU1: finishes (with TI enabled) and releases the port lock. - CPU0: serial8250_backup_timeout() calls the interrupt routine which will transmit the next fifo's worth of data and then restores the IER from the previously saved value (TI disabled). At this point, as long as the serial core has more transmit data buffered, it will not call serial8250_start_tx() again and the background timer routine will slowly transmit the data. The fix is to have serial8250_start_tx() get the port lock before it saves the IER state and release it after restoring IER. This will prevent serial8250_start_tx() from running in parallel. Signed-off-by: Al Cooper Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index f2dfec82faf..7f50999eebc 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -1819,6 +1819,8 @@ static void serial8250_backup_timeout(unsigned long data) unsigned int iir, ier = 0, lsr; unsigned long flags; + spin_lock_irqsave(&up->port.lock, flags); + /* * Must disable interrupts or else we risk racing with the interrupt * based handler. @@ -1836,10 +1838,8 @@ static void serial8250_backup_timeout(unsigned long data) * the "Diva" UART used on the management processor on many HP * ia64 and parisc boxes. */ - spin_lock_irqsave(&up->port.lock, flags); lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - spin_unlock_irqrestore(&up->port.lock, flags); if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && (lsr & UART_LSR_THRE)) { @@ -1848,11 +1848,13 @@ static void serial8250_backup_timeout(unsigned long data) } if (!(iir & UART_IIR_NO_INT)) - serial8250_handle_port(up); + transmit_chars(up); if (is_real_interrupt(up->port.irq)) serial_out(up, UART_IER, ier); + spin_unlock_irqrestore(&up->port.lock, flags); + /* Standard timer interval plus 0.2s to keep the port running */ mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port) + HZ / 5); -- cgit v1.2.3-70-g09d2 From 24d406a6bf736f7aebdc8fa0f0ec86e0890c6d24 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 10 Aug 2011 14:59:28 +0200 Subject: TTY: pty, fix pty counting tty_operations->remove is normally called like: queue_release_one_tty ->tty_shutdown ->tty_driver_remove_tty ->tty_operations->remove However tty_shutdown() is called from queue_release_one_tty() only if tty_operations->shutdown is NULL. But for pty, it is not. pty_unix98_shutdown() is used there as ->shutdown. So tty_operations->remove of pty (i.e. pty_unix98_remove()) is never called. This results in invalid pty_count. I.e. what can be seen in /proc/sys/kernel/pty/nr. I see this was already reported at: https://lkml.org/lkml/2009/11/5/370 But it was not fixed since then. This patch is kind of a hackish way. The problem lies in ->install. We allocate there another tty (so-called tty->link). So ->install is called once, but ->remove twice, for both tty and tty->link. The fix here is to count both tty and tty->link and divide the count by 2 for user. And to have ->remove called, let's make tty_driver_remove_tty() global and call that from pty_unix98_shutdown() (tty_operations->shutdown). While at it, let's document that when ->shutdown is defined, tty_shutdown() is not called. Signed-off-by: Jiri Slaby Cc: Alan Cox Cc: "H. Peter Anvin" Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/pty.c | 17 +++++++++++++++-- drivers/tty/tty_io.c | 3 +-- include/linux/tty.h | 2 ++ include/linux/tty_driver.h | 3 +++ 4 files changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 98b6e3bdb00..e809e9d4683 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -446,8 +446,19 @@ static inline void legacy_pty_init(void) { } int pty_limit = NR_UNIX98_PTY_DEFAULT; static int pty_limit_min; static int pty_limit_max = NR_UNIX98_PTY_MAX; +static int tty_count; static int pty_count; +static inline void pty_inc_count(void) +{ + pty_count = (++tty_count) / 2; +} + +static inline void pty_dec_count(void) +{ + pty_count = (--tty_count) / 2; +} + static struct cdev ptmx_cdev; static struct ctl_table pty_table[] = { @@ -542,6 +553,7 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver, static void pty_unix98_shutdown(struct tty_struct *tty) { + tty_driver_remove_tty(tty->driver, tty); /* We have our own method as we don't use the tty index */ kfree(tty->termios); } @@ -588,7 +600,8 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty) */ tty_driver_kref_get(driver); tty->count++; - pty_count++; + pty_inc_count(); /* tty */ + pty_inc_count(); /* tty->link */ return 0; err_free_mem: deinitialize_tty_struct(o_tty); @@ -602,7 +615,7 @@ err_free_tty: static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) { - pty_count--; + pty_dec_count(); } static const struct tty_operations ptm_unix98_ops = { diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 150e4f747c7..4f1fc81112e 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1295,8 +1295,7 @@ static int tty_driver_install_tty(struct tty_driver *driver, * * Locking: tty_mutex for now */ -static void tty_driver_remove_tty(struct tty_driver *driver, - struct tty_struct *tty) +void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty) { if (driver->ops->remove) driver->ops->remove(driver, tty); diff --git a/include/linux/tty.h b/include/linux/tty.h index 44bc0c5617e..5f2ede82b3d 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -421,6 +421,8 @@ extern void tty_driver_flush_buffer(struct tty_struct *tty); extern void tty_throttle(struct tty_struct *tty); extern void tty_unthrottle(struct tty_struct *tty); extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); +extern void tty_driver_remove_tty(struct tty_driver *driver, + struct tty_struct *tty); extern void tty_shutdown(struct tty_struct *tty); extern void tty_free_termios(struct tty_struct *tty); extern int is_current_pgrp_orphaned(void); diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 9deeac85524..ecdaeb98b29 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -47,6 +47,9 @@ * * This routine is called synchronously when a particular tty device * is closed for the last time freeing up the resources. + * Note that tty_shutdown() is not called if ops->shutdown is defined. + * This means one is responsible to take care of calling ops->remove (e.g. + * via tty_driver_remove_tty) and releasing tty->termios. * * * void (*cleanup)(struct tty_struct * tty); -- cgit v1.2.3-70-g09d2 From 0055197e984e5fbe6f48f37fc50dd30254915493 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 17 Aug 2011 13:48:15 +0200 Subject: TTY: serial, document ignoring of uart->ops->startup error When a user has SYS_ADMIN capabilities and uart->ops->startup returns an error in uart_startup, we silently drop the error. We then return 0 and behave as if it didn't fail. (Not quite, since we set TTY_IO_ERROR bit and leave ASYNC_INITIALIZED bit cleared.) This all is to allow setserial to work with improperly configured or unconfigured ports. User can thus set port properties and reconfigure properly. This patch only documents this behavior. Signed-off-by: Jiri Slaby Cc: Alan Cox Cc: Russel King Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index db7912cb7ae..a3efbea5dbb 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -200,6 +200,11 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in clear_bit(TTY_IO_ERROR, &tty->flags); } + /* + * This is to allow setserial on this port. People may want to set + * port/irq/type and then reconfigure the port properly if it failed + * now. + */ if (retval && capable(CAP_SYS_ADMIN)) retval = 0; -- cgit v1.2.3-70-g09d2 From b280a97d1caf6fe1d38b51ebb31219391f5ad1a0 Mon Sep 17 00:00:00 2001 From: Nick Pelly Date: Fri, 15 Jul 2011 13:53:08 -0700 Subject: omap-serial: Allow IXON and IXOFF to be disabled. Fixes logic bug that software flow control cannot be disabled, because serial_omap_configure_xonxoff() is not called if both IXON and IXOFF bits are cleared. Signed-off-by: Nick Pelly Acked-by: Govindraj.R Tested-by: Govindraj.R Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index c37df8d0fa2..5e713d3ef1f 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -806,8 +806,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_omap_set_mctrl(&up->port, up->port.mctrl); /* Software Flow Control Configuration */ - if (termios->c_iflag & (IXON | IXOFF)) - serial_omap_configure_xonxoff(up, termios); + serial_omap_configure_xonxoff(up, termios); spin_unlock_irqrestore(&up->port.lock, flags); dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); -- cgit v1.2.3-70-g09d2