From 0ccf091d1fbc1f99bb7f93bff8cf346769a9b0cd Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 10 Jun 2014 11:05:43 +0200 Subject: HID: sensor-hub: make dyn_callback_lock IRQ-safe dyn_callback_lock is being taken from IRQ context through hid_irq_in() -> hid_input_report() -> sensor_hub_raw_event() -> sensor_hub_get_callback(), therefore anyone else acquiring it needs to disable IRQs to disable deadlocks. Reported-by: Alexander Holler Tested-by: Alexander Holler Reported-by: Reyad Attiyat Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-hub.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index a8d5c8faf8c..13ce4e3aebf 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -159,17 +159,18 @@ int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev, { struct hid_sensor_hub_callbacks_list *callback; struct sensor_hub_data *pdata = hid_get_drvdata(hsdev->hdev); + unsigned long flags; - spin_lock(&pdata->dyn_callback_lock); + spin_lock_irqsave(&pdata->dyn_callback_lock, flags); list_for_each_entry(callback, &pdata->dyn_callback_list, list) if (callback->usage_id == usage_id && callback->hsdev == hsdev) { - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return -EINVAL; } callback = kzalloc(sizeof(*callback), GFP_ATOMIC); if (!callback) { - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return -ENOMEM; } callback->hsdev = hsdev; @@ -177,7 +178,7 @@ int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev, callback->usage_id = usage_id; callback->priv = NULL; list_add_tail(&callback->list, &pdata->dyn_callback_list); - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return 0; } @@ -188,8 +189,9 @@ int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev, { struct hid_sensor_hub_callbacks_list *callback; struct sensor_hub_data *pdata = hid_get_drvdata(hsdev->hdev); + unsigned long flags; - spin_lock(&pdata->dyn_callback_lock); + spin_lock_irqsave(&pdata->dyn_callback_lock, flags); list_for_each_entry(callback, &pdata->dyn_callback_list, list) if (callback->usage_id == usage_id && callback->hsdev == hsdev) { @@ -197,7 +199,7 @@ int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev, kfree(callback); break; } - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return 0; } @@ -378,15 +380,16 @@ static int sensor_hub_suspend(struct hid_device *hdev, pm_message_t message) { struct sensor_hub_data *pdata = hid_get_drvdata(hdev); struct hid_sensor_hub_callbacks_list *callback; + unsigned long flags; hid_dbg(hdev, " sensor_hub_suspend\n"); - spin_lock(&pdata->dyn_callback_lock); + spin_lock_irqsave(&pdata->dyn_callback_lock, flags); list_for_each_entry(callback, &pdata->dyn_callback_list, list) { if (callback->usage_callback->suspend) callback->usage_callback->suspend( callback->hsdev, callback->priv); } - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return 0; } @@ -395,15 +398,16 @@ static int sensor_hub_resume(struct hid_device *hdev) { struct sensor_hub_data *pdata = hid_get_drvdata(hdev); struct hid_sensor_hub_callbacks_list *callback; + unsigned long flags; hid_dbg(hdev, " sensor_hub_resume\n"); - spin_lock(&pdata->dyn_callback_lock); + spin_lock_irqsave(&pdata->dyn_callback_lock, flags); list_for_each_entry(callback, &pdata->dyn_callback_list, list) { if (callback->usage_callback->resume) callback->usage_callback->resume( callback->hsdev, callback->priv); } - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return 0; } -- cgit v1.2.3-70-g09d2 From 4732aee97b2b05adb472bd7a9ff31af95cbfe62a Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Tue, 10 Jun 2014 20:04:58 +0800 Subject: HID: sensor-hub: introduce Kconfig dependency on IOMEM When NO_IOMEM is enabled (e.g. score architecture), some drivers which need HAS_IOMEM need notice about it, or it will report related warning: warning: (GPIO_SCH && GPIO_ICH && GPIO_VX855 && GPIO_RDC321X && IE6XX_WDT && RADIO_WL1273 && HID_SENSOR_HUB && MFD_NVEC) selects MFD_CORE which has unmet direct dependencies (HAS_IOMEM) Signed-off-by: Chen Gang Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 2 +- drivers/phy/Kconfig | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 800c8b60f7a..5e79c6ad914 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -810,7 +810,7 @@ config HID_ZYDACRON config HID_SENSOR_HUB tristate "HID Sensors framework support" - depends on HID + depends on HID && HAS_IOMEM select MFD_CORE default n ---help--- diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 16a2f067c24..fcdfe7c0e4a 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -122,6 +122,7 @@ config PHY_SUN4I_USB config PHY_SAMSUNG_USB2 tristate "Samsung USB 2.0 PHY driver" + depends on HAS_IOMEM select GENERIC_PHY select MFD_SYSCON help -- cgit v1.2.3-70-g09d2 From a278e26830a2aa6dee1bd4f0ed5ff2bdea4d8887 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 11 Jun 2014 21:03:18 +0200 Subject: HID: rmi: Protect PM-only functions by #ifdef CONFIG_PM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_PM=n: drivers/hid/hid-rmi.c:432: warning: ‘rmi_post_reset’ defined but not used drivers/hid/hid-rmi.c:437: warning: ‘rmi_post_resume’ defined but not used Signed-off-by: Geert Uytterhoeven Signed-off-by: Jiri Kosina --- drivers/hid/hid-rmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c index 2451c7e5feb..578bbe65902 100644 --- a/drivers/hid/hid-rmi.c +++ b/drivers/hid/hid-rmi.c @@ -428,6 +428,7 @@ static int rmi_raw_event(struct hid_device *hdev, return 0; } +#ifdef CONFIG_PM static int rmi_post_reset(struct hid_device *hdev) { return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); @@ -437,6 +438,7 @@ static int rmi_post_resume(struct hid_device *hdev) { return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); } +#endif /* CONFIG_PM */ #define RMI4_MAX_PAGE 0xff #define RMI4_PAGE_SIZE 0x0100 -- cgit v1.2.3-70-g09d2 From 0b514fdb52073e348ade842355f37f6976768e44 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 15 May 2014 08:48:21 +0900 Subject: ARM: shmobile: Add DT and defconfigs to MAINTAINERS There are a number of DT and defconfig files which are maintained as part of shmobile but have not been listed as such in the MAINTAINERS file. This creates confusion from time to time. Signed-off-by: Simon Horman --- MAINTAINERS | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 134483f206e..32e8a20a074 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1296,6 +1296,20 @@ W: http://oss.renesas.com Q: http://patchwork.kernel.org/project/linux-sh/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next S: Supported +F: arch/arm/boot/dts/emev2* +F: arch/arm/boot/dts/r7s* +F: arch/arm/boot/dts/r8a* +F: arch/arm/boot/dts/sh* +F: arch/arm/configs/ape6evm_defconfig +F: arch/arm/configs/armadillo800eva_defconfig +F: arch/arm/configs/bockw_defconfig +F: arch/arm/configs/genmai_defconfig +F: arch/arm/configs/koelsch_defconfig +F: arch/arm/configs/kzm9g_defconfig +F: arch/arm/configs/lager_defconfig +F: arch/arm/configs/mackerel_defconfig +F: arch/arm/configs/marzen_defconfig +F: arch/arm/configs/shmobile_defconfig F: arch/arm/mach-shmobile/ F: drivers/sh/ -- cgit v1.2.3-70-g09d2 From acbd573354bb7b7b7a3891018a39f4b3976b0c43 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Tue, 17 Jun 2014 15:07:55 +0300 Subject: libahci_platform: Fail when PHY required but PHY support disabled ahci_platform_get_resources handles resource management for platform AHCI drivers, including getting a possible PHY from the device tree. Since not all drivers need a PHY, it ignores -ENODEV and -ENOSYS from devm_get_phy. However, when the PHY subsystem is mistakenly disabled, -ENOSYS can be returned even when a PHY is needed. This patch modifies the -ENOSYS case to check if a "phys" device tree node exists. If it exists, then clearly the PHY subsystem is mistakenly disabled and the driver cannot work, ahci_platform_get_resources will fail and propagate the error. Signed-off-by: Mikko Perttunen Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo --- drivers/ata/libahci_platform.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 3a5b4ed25a4..b0077589f06 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -250,8 +250,13 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev) if (IS_ERR(hpriv->phy)) { rc = PTR_ERR(hpriv->phy); switch (rc) { - case -ENODEV: case -ENOSYS: + /* No PHY support. Check if PHY is required. */ + if (of_find_property(dev->of_node, "phys", NULL)) { + dev_err(dev, "couldn't get sata-phy: ENOSYS\n"); + goto err_out; + } + case -ENODEV: /* continue normally */ hpriv->phy = NULL; break; -- cgit v1.2.3-70-g09d2 From d066c946a866268c14a120b33e7226e899981998 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 17 Jun 2014 15:40:13 -0600 Subject: PCI: Fix unaligned access in AF transaction pending test pci_wait_for_pending() uses word access, so we shouldn't be passing an offset that is only byte aligned. Use the control register offset instead, shifting the mask to match. Fixes: d0b4cc4e3270 ("PCI: Wrong register used to check pending traffic") Fixes: 157e876ffe0b ("PCI: Add pci_wait_for_pending() (refactor pci_wait_for_pending_transaction()) Reported-by: Ben Hutchings Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas Acked-by: Gavin Shan CC: stable@vger.kernel.org # v3.14+ --- drivers/pci/pci.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 63a54a34086..1c8592b0e14 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3135,8 +3135,13 @@ static int pci_af_flr(struct pci_dev *dev, int probe) if (probe) return 0; - /* Wait for Transaction Pending bit clean */ - if (pci_wait_for_pending(dev, pos + PCI_AF_STATUS, PCI_AF_STATUS_TP)) + /* + * Wait for Transaction Pending bit to clear. A word-aligned test + * is used, so we use the conrol offset rather than status and shift + * the test bit to match. + */ + if (pci_wait_for_pending(dev, pos + PCI_AF_CTRL, + PCI_AF_STATUS_TP << 8)) goto clear; dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); -- cgit v1.2.3-70-g09d2 From 99bae5f94185c2cc65701e95c54e31e2f4345b88 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 12 Jun 2014 14:31:31 +0800 Subject: cgroup: fix broken css_has_online_children() After running: # mount -t cgroup cpu xxx /cgroup && mkdir /cgroup/sub && \ rmdir /cgroup/sub && umount /cgroup I found the cgroup root still existed: # cat /proc/cgroups #subsys_name hierarchy num_cgroups enabled cpuset 0 1 1 cpu 1 1 1 ... It turned out css_has_online_children() is broken. Signed-off-by: Li Zefan Sigend-off-by: Tejun Heo --- kernel/cgroup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 7868fc3c0bc..d9a8be911f5 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -3328,7 +3328,7 @@ bool css_has_online_children(struct cgroup_subsys_state *css) rcu_read_lock(); css_for_each_child(child, css) { - if (css->flags & CSS_ONLINE) { + if (child->flags & CSS_ONLINE) { ret = true; break; } -- cgit v1.2.3-70-g09d2 From bd07894e217b174361711320be50c8308456096d Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 30 May 2014 15:50:52 +0530 Subject: pinctrl: sunxi: Fix potential null pointer dereference kzalloc can fail. Add a null check to avoid null pointer dereference error while accessing the pointer later. Signed-off-by: Sachin Kamat Acked-by: Maxime Ripard Signed-off-by: Linus Walleij --- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index f1ca75e6d7b..5f38c7f6783 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -211,6 +211,10 @@ static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev, configlen++; pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL); + if (!pinconfig) { + kfree(*map); + return -ENOMEM; + } if (!of_property_read_u32(node, "allwinner,drive", &val)) { u16 strength = (val + 1) * 10; -- cgit v1.2.3-70-g09d2 From 6c7ee8905d54e66d01902c59490bbc99d87d4efb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 16 Jun 2014 12:32:33 +0300 Subject: clk: ti: apll: not allocating enough data There is a cut and paste bug here which will lead to memory corruption because we don't allocate enough data. Fixes: 4d008589e271 ('CLK: TI: APLL: add support for omap2 aplls') Signed-off-by: Dan Carpenter Signed-off-by: Tero Kristo --- drivers/clk/ti/apll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c index 5428c9c547c..18dbaf128a3 100644 --- a/drivers/clk/ti/apll.c +++ b/drivers/clk/ti/apll.c @@ -338,7 +338,7 @@ static void __init of_omap2_apll_setup(struct device_node *node) const char *parent_name; u32 val; - ad = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + ad = kzalloc(sizeof(*ad), GFP_KERNEL); clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); init = kzalloc(sizeof(*init), GFP_KERNEL); -- cgit v1.2.3-70-g09d2 From 8d2f9e8eca807479c83c8f765b6859838da618eb Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 19 May 2014 19:25:48 +0800 Subject: clk: ti: dra7: return error code in failure case Add a returned error code in the MAX_APLL_WAIT_TRIES case. Remove the updating of the return variable r to 0 if MAX_APLL_WAIT_TRIES is not yet reached, because r is already 0 at this point. Signed-off-by: Julia Lawall Signed-off-by: Tero Kristo --- drivers/clk/ti/apll.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c index 18dbaf128a3..72d97279eae 100644 --- a/drivers/clk/ti/apll.c +++ b/drivers/clk/ti/apll.c @@ -77,13 +77,11 @@ static int dra7_apll_enable(struct clk_hw *hw) if (i == MAX_APLL_WAIT_TRIES) { pr_warn("clock: %s failed transition to '%s'\n", clk_name, (state) ? "locked" : "bypassed"); - } else { + r = -EBUSY; + } else pr_debug("clock: %s transition to '%s' in %d loops\n", clk_name, (state) ? "locked" : "bypassed", i); - r = 0; - } - return r; } -- cgit v1.2.3-70-g09d2 From 32cff42d0dc4fa5f474eff0980829537c520df5d Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 17 Jun 2014 17:03:24 +0300 Subject: clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled Define ti_clk_register_dpll_x2() and of_ti_am3_dpll_x2_setup() if AM43XX is defined. Fixes the below boot issue. [ 2.157258] gpmc_l3_clk not enabled [ 2.161194] gpmc_l3_clk not enabled [ 2.164896] Division by zero in kernel. [ 2.169055] CPU: 0 PID: 321 Comm: kworker/u2:2 Tainted: G W 3.16.0-rc1-00008-g4c0e520 #273 [ 2.178880] Workqueue: deferwq deferred_probe_work_func [ 2.184459] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.192752] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 2.200486] [] (dump_stack) from [] (Ldiv0+0x8/0x10) [ 2.207678] [] (Ldiv0) from [] (gpmc_calc_divider+0x24/0x40) [ 2.215490] [] (gpmc_calc_divider) from [] (gpmc_cs_set_timings+0x18/0x474) [ 2.224783] [] (gpmc_cs_set_timings) from [] (gpmc_nand_init+0x74/0x1a8) [ 2.233791] [] (gpmc_nand_init) from [] (gpmc_probe+0x52c/0x874) [ 2.242089] [] (gpmc_probe) from [] (platform_drv_probe+0x18/0x48) [ 2.250534] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 2.259988] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 2.269087] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 2.277620] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 2.286074] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x90) [ 2.295611] [] (deferred_probe_work_func) from [] (process_one_work+0x1b4/0x4bc) [ 2.305288] [] (process_one_work) from [] (worker_thread+0x148/0x550) [ 2.313954] [] (worker_thread) from [] (kthread+0xc8/0xe4) [ 2.321628] [] (kthread) from [] (ret_from_fork+0x14/0x2c) Signed-off-by: Roger Quadros Reported-by: Tony Lindgren Signed-off-by: Tero Kristo --- drivers/clk/ti/dpll.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index abd956d5f83..79791e1bf28 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -161,7 +161,8 @@ cleanup: } #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) /** * ti_clk_register_dpll_x2 - Registers a DPLLx2 clock * @node: device node for this clock @@ -322,7 +323,7 @@ CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock", of_ti_omap4_dpll_x2_setup); #endif -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) static void __init of_ti_am3_dpll_x2_setup(struct device_node *node) { ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL); -- cgit v1.2.3-70-g09d2 From 7d5fc85d961b807c799786afd175f5d964a2109f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jun 2014 11:04:32 +0300 Subject: clk: ti: set CLK_SET_RATE_NO_REPARENT for ti,mux-clock When setting the rate of a clock, by default the clock framework will change the parent of the clock to the most suitable one in __clk_mux_determine_rate() (most suitable by looking at the clock rate). This is a rather dangerous default, and causes problems on AM43x when using display and ethernet. There are multiple ways to select the clock muxes on AM43x, and some of those clock paths have the same source clocks for display and ethernet. When changing the clock rate for the display subsystem, the clock framework decides to change the display mux from the dedicated display PLL to a shared PLL which is used by the ethernet, and then changes the rate of the shared PLL, breaking the ethernet. As I don't think there ever is a case where we want the clock framework to automatically change the parent clock of a clock mux, this patch sets the CLK_SET_RATE_NO_REPARENT for all ti,mux-clocks. Signed-off-by: Tomi Valkeinen Reviewed-by: Paul Walmsley Tested-by: Felipe Balbi Signed-off-by: Tero Kristo --- drivers/clk/ti/mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c index 0197a478720..e9d650e5128 100644 --- a/drivers/clk/ti/mux.c +++ b/drivers/clk/ti/mux.c @@ -160,7 +160,7 @@ static void of_mux_clk_setup(struct device_node *node) u8 clk_mux_flags = 0; u32 mask = 0; u32 shift = 0; - u32 flags = 0; + u32 flags = CLK_SET_RATE_NO_REPARENT; num_parents = of_clk_get_parent_count(node); if (num_parents < 2) { -- cgit v1.2.3-70-g09d2 From e6dd42a917e62d916c6e513dbf87a4dec8cf3a1c Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 28 May 2014 23:05:39 +0800 Subject: ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable] Doing suspend/resume on imx6q and imx53 boards with no SATA disk attached will trigger the following warning. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 661 at drivers/ata/libahci.c:224 ahci_enable_ahci+0x74/0x8) Modules linked in: CPU: 0 PID: 661 Comm: sh Tainted: G W 3.15.0-rc5-next-20140521-000027 Backtrace: [<80011c90>] (dump_backtrace) from [<80011e2c>] (show_stack+0x18/0x1c) r6:803a22f4 r5:00000000 r4:00000000 r3:00000000 [<80011e14>] (show_stack) from [<80661e60>] (dump_stack+0x88/0xa4) [<80661dd8>] (dump_stack) from [<80028fdc>] (warn_slowpath_common+0x70/0x94) r5:00000009 r4:00000000 [<80028f6c>] (warn_slowpath_common) from [<80029024>] (warn_slowpath_null+0x24/) r8:808f68c4 r7:00000000 r6:00000000 r5:00000000 r4:e0810004 [<80029000>] (warn_slowpath_null) from [<803a22f4>] (ahci_enable_ahci+0x74/0x80) [<803a2280>] (ahci_enable_ahci) from [<803a2324>] (ahci_reset_controller+0x24/0) r8:ddcd9410 r7:80351178 r6:ddcd9444 r5:dde8b850 r4:e0810000 r3:ddf35e90 [<803a2300>] (ahci_reset_controller) from [<803a2c68>] (ahci_platform_resume_ho) r7:80351178 r6:ddcd9444 r5:dde8b850 r4:ddcd9410 [<803a2c30>] (ahci_platform_resume_host) from [<803a38f0>] (imx_ahci_resume+0x2) r5:00000000 r4:ddcd9410 [<803a38c4>] (imx_ahci_resume) from [<803511ac>] (platform_pm_resume+0x34/0x54) .... The reason is that the SATA controller has no working clock at this point, and thus ahci_enable_ahci() fails to enable the controller. In case that there is no SATA disk attached, the imx_sata_disable() gets called in ahci_imx_error_handler(), and both sata_clk and sata_ref_clk will be disabled there. Because all the imx_sata_enable() calls afterward will return immediately due to imxpriv->no_device check, the SATA controller working clock sata_clk will never get any chance to be enabled again. This is a regression caused by commit 90870d79d4f2 (ahci-imx: Port to library-ised ahci_platform). Before the commit, only sata_ref_clk is managed by the driver in enable/disable function. But after the commit, all the clocks are enabled/disabled in a row by ahci platform helpers ahci_platform_enable[disable]_clks. Since ahb_clk is a bus clock which does not have gate at all, and i.MX low-power hardware module already manages sata_clk across suspend/resume cycle, the only clock that needs to be managed by software is sata_ref_clk. So instead of using ahci_platform_enable[disable]_clks to manage all the clocks in a row from imx_sata_enable[disable], we should manage only sata_ref_clk in there. Reported-by: Fabio Estevam Fixes: 90870d79d4f2 (ahci-imx: Port to library-ised ahci_platform) Signed-off-by: Shawn Guo Acked-by: Hans de Goede --- drivers/ata/ahci_imx.c | 35 +++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index 3a901520c62..4384a7d7213 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -58,6 +58,8 @@ enum ahci_imx_type { struct imx_ahci_priv { struct platform_device *ahci_pdev; enum ahci_imx_type type; + struct clk *sata_clk; + struct clk *sata_ref_clk; struct clk *ahb_clk; struct regmap *gpr; bool no_device; @@ -224,7 +226,7 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv) return ret; } - ret = ahci_platform_enable_clks(hpriv); + ret = clk_prepare_enable(imxpriv->sata_ref_clk); if (ret < 0) goto disable_regulator; @@ -291,7 +293,7 @@ static void imx_sata_disable(struct ahci_host_priv *hpriv) !IMX6Q_GPR13_SATA_MPLL_CLK_EN); } - ahci_platform_disable_clks(hpriv); + clk_disable_unprepare(imxpriv->sata_ref_clk); if (hpriv->target_pwr) regulator_disable(hpriv->target_pwr); @@ -385,6 +387,19 @@ static int imx_ahci_probe(struct platform_device *pdev) imxpriv->no_device = false; imxpriv->first_time = true; imxpriv->type = (enum ahci_imx_type)of_id->data; + + imxpriv->sata_clk = devm_clk_get(dev, "sata"); + if (IS_ERR(imxpriv->sata_clk)) { + dev_err(dev, "can't get sata clock.\n"); + return PTR_ERR(imxpriv->sata_clk); + } + + imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref"); + if (IS_ERR(imxpriv->sata_ref_clk)) { + dev_err(dev, "can't get sata_ref clock.\n"); + return PTR_ERR(imxpriv->sata_ref_clk); + } + imxpriv->ahb_clk = devm_clk_get(dev, "ahb"); if (IS_ERR(imxpriv->ahb_clk)) { dev_err(dev, "can't get ahb clock.\n"); @@ -407,10 +422,14 @@ static int imx_ahci_probe(struct platform_device *pdev) hpriv->plat_data = imxpriv; - ret = imx_sata_enable(hpriv); + ret = clk_prepare_enable(imxpriv->sata_clk); if (ret) return ret; + ret = imx_sata_enable(hpriv); + if (ret) + goto disable_clk; + /* * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, * and IP vendor specific register IMX_TIMER1MS. @@ -435,16 +454,24 @@ static int imx_ahci_probe(struct platform_device *pdev) ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, 0, 0, 0); if (ret) - imx_sata_disable(hpriv); + goto disable_sata; + + return 0; +disable_sata: + imx_sata_disable(hpriv); +disable_clk: + clk_disable_unprepare(imxpriv->sata_clk); return ret; } static void ahci_imx_host_stop(struct ata_host *host) { struct ahci_host_priv *hpriv = host->private_data; + struct imx_ahci_priv *imxpriv = hpriv->plat_data; imx_sata_disable(hpriv); + clk_disable_unprepare(imxpriv->sata_clk); } #ifdef CONFIG_PM_SLEEP -- cgit v1.2.3-70-g09d2 From ccfb30001f37ace4690a74c27b4812cf054e123a Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 13 Jun 2014 13:02:11 +0900 Subject: f2fs: fix to report newly allocate region as extent Previous get_block in f2fs didn't report the newly allocated region which has NEW_ADDR. For reader, it should not report, but fiemap needs this. So, this patch introduces two get_block sharing core function. Signed-off-by: Jaegeuk Kim --- fs/f2fs/data.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index 0924521306b..f8cf619edb5 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -608,8 +608,8 @@ static int __allocate_data_block(struct dnode_of_data *dn) * b. do not use extent cache for better performance * c. give the block addresses to blockdev */ -static int get_data_block(struct inode *inode, sector_t iblock, - struct buffer_head *bh_result, int create) +static int __get_data_block(struct inode *inode, sector_t iblock, + struct buffer_head *bh_result, int create, bool fiemap) { struct f2fs_sb_info *sbi = F2FS_SB(inode->i_sb); unsigned int blkbits = inode->i_sb->s_blocksize_bits; @@ -637,7 +637,7 @@ static int get_data_block(struct inode *inode, sector_t iblock, err = 0; goto unlock_out; } - if (dn.data_blkaddr == NEW_ADDR) + if (dn.data_blkaddr == NEW_ADDR && !fiemap) goto put_out; if (dn.data_blkaddr != NULL_ADDR) { @@ -671,7 +671,7 @@ get_next: err = 0; goto unlock_out; } - if (dn.data_blkaddr == NEW_ADDR) + if (dn.data_blkaddr == NEW_ADDR && !fiemap) goto put_out; end_offset = ADDRS_PER_PAGE(dn.node_page, F2FS_I(inode)); @@ -708,10 +708,23 @@ out: return err; } +static int get_data_block(struct inode *inode, sector_t iblock, + struct buffer_head *bh_result, int create) +{ + return __get_data_block(inode, iblock, bh_result, create, false); +} + +static int get_data_block_fiemap(struct inode *inode, sector_t iblock, + struct buffer_head *bh_result, int create) +{ + return __get_data_block(inode, iblock, bh_result, create, true); +} + int f2fs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, u64 start, u64 len) { - return generic_block_fiemap(inode, fieinfo, start, len, get_data_block); + return generic_block_fiemap(inode, fieinfo, + start, len, get_data_block_fiemap); } static int f2fs_read_data_page(struct file *file, struct page *page) -- cgit v1.2.3-70-g09d2 From ead432756ab2c76b1f1de742a1c8a06992cb98eb Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 13 Jun 2014 13:05:55 +0900 Subject: f2fs: recover fallocated data and its i_size together This patch arranges the f2fs_locks to cover the fallocated data and its i_size. Signed-off-by: Jaegeuk Kim --- fs/f2fs/file.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index c58e3307571..f6c4bdaaae8 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -659,13 +659,13 @@ static int expand_inode_data(struct inode *inode, loff_t offset, off_start = offset & (PAGE_CACHE_SIZE - 1); off_end = (offset + len) & (PAGE_CACHE_SIZE - 1); + f2fs_lock_op(sbi); + for (index = pg_start; index <= pg_end; index++) { struct dnode_of_data dn; - f2fs_lock_op(sbi); set_new_dnode(&dn, inode, NULL, NULL, 0); ret = f2fs_reserve_block(&dn, index); - f2fs_unlock_op(sbi); if (ret) break; @@ -683,8 +683,9 @@ static int expand_inode_data(struct inode *inode, loff_t offset, i_size_read(inode) < new_size) { i_size_write(inode, new_size); mark_inode_dirty(inode); - f2fs_write_inode(inode, NULL); + update_inode_page(inode); } + f2fs_unlock_op(sbi); return ret; } -- cgit v1.2.3-70-g09d2 From 98397ff3cddcfdedd2ba1701bd30a73c1d733769 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 13 Jun 2014 13:07:31 +0900 Subject: f2fs: fix not to allocate unnecessary blocks during fallocate This patch fixes the fallocate bug like below. (See xfstests/255) In fallocate(fd, 0, 20480), expand_inode_data processes for (index = pg_start; index <= pg_end; index++) { f2fs_reserve_block(); ... } So, even though fallocate requests 20480, 5 blocks, f2fs allocates 6 blocks including pg_end. So, this patch adds one condition to avoid block allocation. Signed-off-by: Jaegeuk Kim --- fs/f2fs/file.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index f6c4bdaaae8..7d8b9627509 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -664,11 +664,14 @@ static int expand_inode_data(struct inode *inode, loff_t offset, for (index = pg_start; index <= pg_end; index++) { struct dnode_of_data dn; + if (index == pg_end && !off_end) + goto noalloc; + set_new_dnode(&dn, inode, NULL, NULL, 0); ret = f2fs_reserve_block(&dn, index); if (ret) break; - +noalloc: if (pg_start == pg_end) new_size = offset + len; else if (index == pg_start && off_start) -- cgit v1.2.3-70-g09d2 From bddbceb688c6d0decaabc7884fede319d02f96c8 Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Mon, 23 Jun 2014 16:35:35 +0200 Subject: workqueue: fix dev_set_uevent_suppress() imbalance Uevents are suppressed during attributes registration, but never restored, so kobject_uevent() does nothing. Signed-off-by: Maxime Bizon Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Fixes: 226223ab3c4118ddd10688cc2c131135848371ab --- kernel/workqueue.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 6203d290087..6f5f9c7323f 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -3284,6 +3284,7 @@ int workqueue_sysfs_register(struct workqueue_struct *wq) } } + dev_set_uevent_suppress(&wq_dev->dev, false); kobject_uevent(&wq_dev->dev.kobj, KOBJ_ADD); return 0; } -- cgit v1.2.3-70-g09d2 From 72cbaa3d2f563d7b48c9f8aef47ec9aa3a31adf2 Mon Sep 17 00:00:00 2001 From: Kefeng Wang Date: Tue, 24 Jun 2014 16:54:23 -0400 Subject: ahci: disable ncq feature for hisilicon sata NCQ feature is unsupported on hisilicon sata controller, so disable it. This version of IP is used by hip04 and hix5hd2 soc. tj: "|=" was replaced with "=" for no reason. Restored "|=". Signed-off-by: Kefeng Wang Sigend-off-by: Tejun Heo --- drivers/ata/ahci_platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index ebe505c1776..b10d81ddb52 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -58,7 +58,7 @@ static int ahci_probe(struct platform_device *pdev) } if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci")) - hflags |= AHCI_HFLAG_NO_FBS; + hflags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ; rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info, hflags, 0, 0); -- cgit v1.2.3-70-g09d2 From f118ae5901172dacc4f272acf5eccfba06e8d221 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 23 Jun 2014 12:59:08 +0100 Subject: ata: ahci_imx: warn when disabling ahci link When the AHCI link is disabled, it can't be re-enabled except by resetting the entire SoC. Rather than doing this silently print some kernel messages to inform the user, along with how to avoid this. tj: Put a long printf format string on a single line. Signed-off-by: Russell King Signed-off-by: Tejun Heo --- drivers/ata/ahci_imx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index 4384a7d7213..cac4360f272 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -326,6 +326,9 @@ static void ahci_imx_error_handler(struct ata_port *ap) writel(reg_val | IMX_P0PHYCR_TEST_PDDQ, mmio + IMX_P0PHYCR); imx_sata_disable(hpriv); imxpriv->no_device = true; + + dev_info(ap->dev, "no device found, disabling link.\n"); + dev_info(ap->dev, "pass " MODULE_PARAM_PREFIX ".hotplug=1 to enable hotplug\n"); } static int ahci_imx_softreset(struct ata_link *link, unsigned int *class, -- cgit v1.2.3-70-g09d2 From 391acf970d21219a2a5446282d3b20eace0c0d7a Mon Sep 17 00:00:00 2001 From: Gu Zheng Date: Wed, 25 Jun 2014 09:57:18 +0800 Subject: cpuset,mempolicy: fix sleeping function called from invalid context When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [] dump_stack+0x4d/0x66 [ 9970.065074] [] __might_sleep+0xfa/0x130 [ 9970.130743] [] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [] ? __mpol_dup+0x63/0x150 [ 9970.409282] [] __mpol_dup+0xe5/0x150 [ 9970.471897] [] ? __mpol_dup+0x63/0x150 [ 9970.536585] [] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [] do_fork+0xd8/0x380 [ 9970.894375] [] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [] SyS_clone+0x16/0x20 [ 9971.030011] [] stub_clone+0x69/0x90 [ 9971.091573] [] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by: Gu Zheng Acked-by: Li Zefan Signed-off-by: Tejun Heo Cc: stable --- kernel/cpuset.c | 8 +++++++- mm/mempolicy.c | 2 -- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index f6b33c69622..d3df02e7664 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1181,7 +1181,13 @@ done: int current_cpuset_is_being_rebound(void) { - return task_cs(current) == cpuset_being_rebound; + int ret; + + rcu_read_lock(); + ret = task_cs(current) == cpuset_being_rebound; + rcu_read_unlock(); + + return ret; } static int update_relax_domain_level(struct cpuset *cs, s64 val) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 28497423045..9a3783ccff6 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -2145,7 +2145,6 @@ struct mempolicy *__mpol_dup(struct mempolicy *old) } else *new = *old; - rcu_read_lock(); if (current_cpuset_is_being_rebound()) { nodemask_t mems = cpuset_mems_allowed(current); if (new->flags & MPOL_F_REBINDING) @@ -2153,7 +2152,6 @@ struct mempolicy *__mpol_dup(struct mempolicy *old) else mpol_rebind_policy(new, &mems, MPOL_REBIND_ONCE); } - rcu_read_unlock(); atomic_set(&new->refcnt, 1); return new; } -- cgit v1.2.3-70-g09d2 From cfe82d4f45c7cc39332a2be7c4c1d3bf279bbd3d Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Mon, 23 Jun 2014 19:41:05 +0300 Subject: crypto: sha512_ssse3 - fix byte count to bit count conversion Byte-to-bit-count computation is only partly converted to big-endian and is mixing in CPU-endian values. Problem was noticed by sparce with warning: CHECK arch/x86/crypto/sha512_ssse3_glue.c arch/x86/crypto/sha512_ssse3_glue.c:144:19: warning: restricted __be64 degrades to integer arch/x86/crypto/sha512_ssse3_glue.c:144:17: warning: incorrect type in assignment (different base types) arch/x86/crypto/sha512_ssse3_glue.c:144:17: expected restricted __be64 arch/x86/crypto/sha512_ssse3_glue.c:144:17: got unsigned long long Cc: Signed-off-by: Jussi Kivilinna Acked-by: Tim Chen Signed-off-by: Herbert Xu --- arch/x86/crypto/sha512_ssse3_glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/crypto/sha512_ssse3_glue.c b/arch/x86/crypto/sha512_ssse3_glue.c index f30cd10293f..8626b03e83b 100644 --- a/arch/x86/crypto/sha512_ssse3_glue.c +++ b/arch/x86/crypto/sha512_ssse3_glue.c @@ -141,7 +141,7 @@ static int sha512_ssse3_final(struct shash_desc *desc, u8 *out) /* save number of bits */ bits[1] = cpu_to_be64(sctx->count[0] << 3); - bits[0] = cpu_to_be64(sctx->count[1] << 3) | sctx->count[0] >> 61; + bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61); /* Pad out to 112 mod 128 and append length */ index = sctx->count[0] & 0x7f; -- cgit v1.2.3-70-g09d2 From f14d1c24c64bec45c01b0bc7b0dde2e54a797662 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 30 May 2014 11:03:28 +0100 Subject: MAINTAINERS: Update Eduardo Valentin's email address Eduardo TI address is bouncing, but it looks like he's still contributing via his Gmail address. Cc: Eduardo Valentin Signed-off-by: Lee Jones Signed-off-by: Zhang Rui --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3f2e171047b..45bced732cf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8969,7 +8969,7 @@ F: drivers/media/radio/radio-raremono.c THERMAL M: Zhang Rui -M: Eduardo Valentin +M: Eduardo Valentin L: linux-pm@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git @@ -8996,7 +8996,7 @@ S: Maintained F: drivers/platform/x86/thinkpad_acpi.c TI BANDGAP AND THERMAL DRIVER -M: Eduardo Valentin +M: Eduardo Valentin L: linux-pm@vger.kernel.org S: Supported F: drivers/thermal/ti-soc-thermal/ -- cgit v1.2.3-70-g09d2 From e556756a6326d55dcbb476d471dcda36814fd696 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 9 Jun 2014 15:11:13 +0200 Subject: i2c: mux: pca954x: fix dependencies MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This driver causes the following randconfig build error: drivers/i2c/muxes/i2c-mux-pca954x.c: In function ‘pca954x_probe’: drivers/i2c/muxes/i2c-mux-pca954x.c:204:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration] gpio = devm_gpiod_get(&client->dev, "reset"); ^ drivers/i2c/muxes/i2c-mux-pca954x.c:204:7: warning: assignment makes pointer from integer without a cast [enabled by default] gpio = devm_gpiod_get(&client->dev, "reset"); ^ drivers/i2c/muxes/i2c-mux-pca954x.c:206:3: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration] gpiod_direction_output(gpio, 0); ^ cc1: some warnings being treated as errors make[3]: *** [drivers/i2c/muxes/i2c-mux-pca954x.o] Error 1 This is because it is getting compiled without gpiolib, so introduce an explicit dependency. Reported-by: Jim Davis Signed-off-by: Linus Walleij Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index f7f9865b8b8..f6d313e528d 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -40,6 +40,7 @@ config I2C_MUX_PCA9541 config I2C_MUX_PCA954x tristate "Philips PCA954x I2C Mux/switches" + depends on GPIOLIB help If you say yes here you get support for the Philips PCA954x I2C mux/switch devices. -- cgit v1.2.3-70-g09d2 From 098aebc30292c10b31f6aa58bf4fe2c4b26001f6 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 24 Jun 2014 09:25:28 +0530 Subject: i2c: sun6i-p2wi: Remove duplicate inclusion of module.h module.h was included twice. Signed-off-by: Sachin Kamat Acked-by: Boris BREZILLON Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-sun6i-p2wi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c index 09de4fd12d5..4d75d475970 100644 --- a/drivers/i2c/busses/i2c-sun6i-p2wi.c +++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c @@ -22,7 +22,6 @@ * */ #include -#include #include #include #include -- cgit v1.2.3-70-g09d2 From 66e5482752386786c4346f4f4b214b0998639702 Mon Sep 17 00:00:00 2001 From: John Sung Date: Fri, 27 Jun 2014 16:22:08 +0800 Subject: HID: usbhid: quirk for PM1610 and PM1640 Touchscreen. These device needs to be added to the quirks list with HID_QUIRK_NOGET, otherwise they will reset upon receiving the get input report requests. Signed-off-by: John Sung Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 2 ++ drivers/hid/usbhid/hid-quirks.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 6d00bb9366f..1efeb12a38c 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -715,6 +715,8 @@ #define USB_VENDOR_ID_PENMOUNT 0x14e1 #define USB_DEVICE_ID_PENMOUNT_PCI 0x3500 +#define USB_DEVICE_ID_PENMOUNT_1610 0x1610 +#define USB_DEVICE_ID_PENMOUNT_1640 0x1640 #define USB_VENDOR_ID_PETALYNX 0x18b1 #define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 59badc10a08..fbaefc34ee9 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -76,6 +76,8 @@ static const struct hid_blacklist { { USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GX680R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS }, + { USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_1610, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_1640, HID_QUIRK_NOGET }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS }, -- cgit v1.2.3-70-g09d2 From e8db5d6736a712a3e2280c0e31f4b301d85172d8 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Wed, 21 May 2014 16:33:27 +0800 Subject: thermal: hwmon: Make the check for critical temp valid consistent On 05/21/2014 04:22 PM, Aaron Lu wrote: > On 05/21/2014 01:57 PM, Kui Zhang wrote: >> Hello, >> >> I get following error when rmmod thermal. >> >> rmmod thermal >> Killed While dealing with this problem, I found another problem that also results in a kernel crash on thermal module removal: From: Aaron Lu Date: Wed, 21 May 2014 16:05:38 +0800 Subject: [PATCH] thermal: hwmon: Make the check for critical temp valid consistent We used the tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, temp) to decide if we need to create the temp_crit attribute file but we just check if tz->ops->get_crit_temp exists to decide if we need to remove that attribute file. Some ACPI thermal zone doesn't have a valid critical trip point and that would result in removing a non-existent device file on thermal module unload. Cc: All applicable Signed-off-by: Aaron Lu Signed-off-by: Zhang Rui --- drivers/thermal/thermal_hwmon.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c index fdb07199d9c..1967bee4f07 100644 --- a/drivers/thermal/thermal_hwmon.c +++ b/drivers/thermal/thermal_hwmon.c @@ -140,6 +140,12 @@ thermal_hwmon_lookup_temp(const struct thermal_hwmon_device *hwmon, return NULL; } +static bool thermal_zone_crit_temp_valid(struct thermal_zone_device *tz) +{ + unsigned long temp; + return tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, &temp); +} + int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) { struct thermal_hwmon_device *hwmon; @@ -189,21 +195,18 @@ int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) if (result) goto free_temp_mem; - if (tz->ops->get_crit_temp) { - unsigned long temperature; - if (!tz->ops->get_crit_temp(tz, &temperature)) { - snprintf(temp->temp_crit.name, - sizeof(temp->temp_crit.name), + if (thermal_zone_crit_temp_valid(tz)) { + snprintf(temp->temp_crit.name, + sizeof(temp->temp_crit.name), "temp%d_crit", hwmon->count); - temp->temp_crit.attr.attr.name = temp->temp_crit.name; - temp->temp_crit.attr.attr.mode = 0444; - temp->temp_crit.attr.show = temp_crit_show; - sysfs_attr_init(&temp->temp_crit.attr.attr); - result = device_create_file(hwmon->device, - &temp->temp_crit.attr); - if (result) - goto unregister_input; - } + temp->temp_crit.attr.attr.name = temp->temp_crit.name; + temp->temp_crit.attr.attr.mode = 0444; + temp->temp_crit.attr.show = temp_crit_show; + sysfs_attr_init(&temp->temp_crit.attr.attr); + result = device_create_file(hwmon->device, + &temp->temp_crit.attr); + if (result) + goto unregister_input; } mutex_lock(&thermal_hwmon_list_lock); @@ -250,7 +253,7 @@ void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) } device_remove_file(hwmon->device, &temp->temp_input.attr); - if (tz->ops->get_crit_temp) + if (thermal_zone_crit_temp_valid(tz)) device_remove_file(hwmon->device, &temp->temp_crit.attr); mutex_lock(&thermal_hwmon_list_lock); -- cgit v1.2.3-70-g09d2 From ca9521b770c988bb6bb8eea1241f7a487dab6ff1 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 18 Jun 2014 16:32:08 -0700 Subject: thermal: Add braces around suspect code It looks like this code is missing braces, otherwise the if statement shouldn't have been indented. Fix it. Signed-off-by: Stephen Boyd Signed-off-by: Zhang Rui --- drivers/thermal/of-thermal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 04b1be7fa01..a95ee2889b1 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -712,11 +712,12 @@ thermal_of_build_thermal_zone(struct device_node *np) } i = 0; - for_each_child_of_node(child, gchild) + for_each_child_of_node(child, gchild) { ret = thermal_of_populate_bind_params(gchild, &tz->tbps[i++], tz->trips, tz->ntrips); if (ret) goto free_tbps; + } finish: of_node_put(child); -- cgit v1.2.3-70-g09d2 From dd354b84d47ec8ca53686bdb3cc1aecdeb75bef5 Mon Sep 17 00:00:00 2001 From: Punit Agrawal Date: Tue, 3 Jun 2014 10:59:58 +0100 Subject: thermal: Bind cooling devices with the correct arguments When binding cooling devices to thermal zones created from the device tree the minimum and maximum cooling states are in the wrong order leading to failure to bind. Fix the order of cooling states in the call to thermal_zone_bind_cooling_device to fix this. Cc:Zhang Rui Signed-off-by: Punit Agrawal Reviewed-by: Stephen Boyd Signed-off-by: Zhang Rui --- drivers/thermal/of-thermal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index a95ee2889b1..4b2b999b761 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -156,8 +156,8 @@ static int of_thermal_bind(struct thermal_zone_device *thermal, ret = thermal_zone_bind_cooling_device(thermal, tbp->trip_id, cdev, - tbp->min, - tbp->max); + tbp->max, + tbp->min); if (ret) return ret; } -- cgit v1.2.3-70-g09d2 From 93a88ef305ae928d9b1548d6c96734ae87843d02 Mon Sep 17 00:00:00 2001 From: Naveen Krishna Chatradhi Date: Thu, 26 Jun 2014 18:20:14 +0530 Subject: hwmon: (ntc_thermistor) Correct information printed during probe Currently, dev_info() at the end of the probe says "type:%s ". But, prints pdev->name. This patch uses "pdev_id->name" which prints the thermistor type. Signed-off-by: Naveen Krishna Chatradhi Signed-off-by: Guenter Roeck --- drivers/hwmon/ntc_thermistor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index bdfbe911488..ae66f42c4d6 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -512,7 +512,7 @@ static int ntc_thermistor_probe(struct platform_device *pdev) } dev_info(&pdev->dev, "Thermistor type: %s successfully probed.\n", - pdev->name); + pdev_id->name); return 0; err_after_sysfs: -- cgit v1.2.3-70-g09d2 From ceec634076b91bea57107541a46e92d765c69488 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 30 Jun 2014 11:34:48 +0200 Subject: HID: sensor-hub: fix potential memory leak hsdev is not freed in sensor_hub_probe when kasprintf inside the for loop fails. This is because hsdev is not set to platform_data yet (to be freed by the code in the err_no_mem label). So free the memory explicitly in the 'if' branch, as this is the only place where this is (and will) be needed. Reported-by: coverity Signed-off-by: Jiri Slaby Cc: srinivas pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-hub.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index 13ce4e3aebf..e244e449cbb 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -636,6 +636,7 @@ static int sensor_hub_probe(struct hid_device *hdev, if (name == NULL) { hid_err(hdev, "Failed MFD device name\n"); ret = -ENOMEM; + kfree(hsdev); goto err_no_mem; } sd->hid_sensor_hub_client_devs[ -- cgit v1.2.3-70-g09d2 From cec1cdea6f6d9fadf5f14fa80754d4a066ca76e0 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 23 Jun 2014 23:29:09 +0300 Subject: clk: samsung: fix several typos to fix boot on s3c2410 There's a several typos in a driver: 2410 instead of S3C2410 and wrong argument to ARRAY_SIZE(). They prevent s3c2410 from properly booting. Signed-off-by: Vasily Khoruzhick Reviewed-by: Heiko Stuebner Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-s3c2410.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c index ba0716801db..bd9a873da09 100644 --- a/drivers/clk/samsung/clk-s3c2410.c +++ b/drivers/clk/samsung/clk-s3c2410.c @@ -378,7 +378,7 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, if (!np) s3c2410_common_clk_register_fixed_ext(ctx, xti_f); - if (current_soc == 2410) { + if (current_soc == S3C2410) { if (_get_rate("xti") == 12 * MHZ) { s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl; s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl; @@ -432,7 +432,7 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor, ARRAY_SIZE(s3c2410_ffactor)); samsung_clk_register_alias(ctx, s3c2410_aliases, - ARRAY_SIZE(s3c2410_common_aliases)); + ARRAY_SIZE(s3c2410_aliases)); break; case S3C2440: samsung_clk_register_mux(ctx, s3c2440_muxes, -- cgit v1.2.3-70-g09d2 From 34ece9e610682f34776136cba7b4600ea5d8fd94 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 23 Jun 2014 23:29:10 +0300 Subject: clk: samsung: add more aliases for s3c24xx Without these aliases clock lookup fails in s3c2410fb, s3cmci, s3c2410-nand, s3c24xx-i2s, and i2c-s3c2410 drivers. Signed-off-by: Vasily Khoruzhick Reviewed-by: Heiko Stuebner Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-s3c2410.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c index bd9a873da09..140f4733c02 100644 --- a/drivers/clk/samsung/clk-s3c2410.c +++ b/drivers/clk/samsung/clk-s3c2410.c @@ -152,6 +152,11 @@ struct samsung_clock_alias s3c2410_common_aliases[] __initdata = { ALIAS(HCLK, NULL, "hclk"), ALIAS(MPLL, NULL, "mpll"), ALIAS(FCLK, NULL, "fclk"), + ALIAS(PCLK, NULL, "watchdog"), + ALIAS(PCLK_SDI, NULL, "sdi"), + ALIAS(HCLK_NAND, NULL, "nand"), + ALIAS(PCLK_I2S, NULL, "iis"), + ALIAS(PCLK_I2C, NULL, "i2c"), }; /* S3C2410 specific clocks */ -- cgit v1.2.3-70-g09d2 From a37c82a3b3c0910019abfd22a97be1fdf11ae3e5 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Tue, 24 Jun 2014 15:57:12 +0200 Subject: clk: samsung: exynos4: Remove SRC_MASK_ISP gates ISP special clocks have dedicated gating registers and so MUX SRC_MASK register should not be used. This patch fixes the problem of Exynos4x12-based boards freezing on system suspend, because those mux outputs need not to be masked while suspending. Signed-off-by: Tomasz Figa Cc: Mike Turquette --- drivers/clk/samsung/clk-exynos4.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index 4f150c9dd38..7f4a473a7ad 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -925,21 +925,13 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { GATE(CLK_RTC, "rtc", "aclk100", E4X12_GATE_IP_PERIR, 15, 0, 0), GATE(CLK_KEYIF, "keyif", "aclk100", E4X12_GATE_IP_PERIR, 16, 0, 0), - GATE(CLK_SCLK_PWM_ISP, "sclk_pwm_isp", "div_pwm_isp", - E4X12_SRC_MASK_ISP, 0, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp_pre", - E4X12_SRC_MASK_ISP, 4, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp_pre", - E4X12_SRC_MASK_ISP, 8, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp", - E4X12_SRC_MASK_ISP, 12, CLK_SET_RATE_PARENT, 0), - GATE(CLK_PWM_ISP_SCLK, "pwm_isp_sclk", "sclk_pwm_isp", + GATE(CLK_PWM_ISP_SCLK, "pwm_isp_sclk", "div_pwm_isp", E4X12_GATE_IP_ISP, 0, 0, 0), - GATE(CLK_SPI0_ISP_SCLK, "spi0_isp_sclk", "sclk_spi0_isp", + GATE(CLK_SPI0_ISP_SCLK, "spi0_isp_sclk", "div_spi0_isp_pre", E4X12_GATE_IP_ISP, 1, 0, 0), - GATE(CLK_SPI1_ISP_SCLK, "spi1_isp_sclk", "sclk_spi1_isp", + GATE(CLK_SPI1_ISP_SCLK, "spi1_isp_sclk", "div_spi1_isp_pre", E4X12_GATE_IP_ISP, 2, 0, 0), - GATE(CLK_UART_ISP_SCLK, "uart_isp_sclk", "sclk_uart_isp", + GATE(CLK_UART_ISP_SCLK, "uart_isp_sclk", "div_uart_isp", E4X12_GATE_IP_ISP, 3, 0, 0), GATE(CLK_WDT, "watchdog", "aclk100", E4X12_GATE_IP_PERIR, 14, 0, 0), GATE(CLK_PCM0, "pcm0", "aclk100", E4X12_GATE_IP_MAUDIO, 2, -- cgit v1.2.3-70-g09d2 From a92dda4bfad338b48c6190b1da70fe7f0eefc55d Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 18 Jun 2014 10:52:23 +0100 Subject: clk: s3c64xx: Hookup SPI clocks correctly In the move to this clock driver the hookups for the SPI clocks were dropped, which causes my system Cragganmore (s3c6410 based) to be unable to locate any spibus clocks. This patch adds them back in. When taking the clock from the epll clock (SCLK) the rates on the SPI bus are incorrect, this needs further debugging but the hookup here should be correct and the problem should be else where. The USBCLK case has been dropped because this requires the USB PHY to be enabled. Signed-off-by: Charles Keepax Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-s3c64xx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c index efa16ee592c..8889ff1c10f 100644 --- a/drivers/clk/samsung/clk-s3c64xx.c +++ b/drivers/clk/samsung/clk-s3c64xx.c @@ -418,8 +418,10 @@ static struct samsung_clock_alias s3c64xx_clock_aliases[] = { ALIAS(SCLK_MMC2, "s3c-sdhci.2", "mmc_busclk.2"), ALIAS(SCLK_MMC1, "s3c-sdhci.1", "mmc_busclk.2"), ALIAS(SCLK_MMC0, "s3c-sdhci.0", "mmc_busclk.2"), - ALIAS(SCLK_SPI1, "s3c6410-spi.1", "spi-bus"), - ALIAS(SCLK_SPI0, "s3c6410-spi.0", "spi-bus"), + ALIAS(PCLK_SPI1, "s3c6410-spi.1", "spi_busclk0"), + ALIAS(SCLK_SPI1, "s3c6410-spi.1", "spi_busclk2"), + ALIAS(PCLK_SPI0, "s3c6410-spi.0", "spi_busclk0"), + ALIAS(SCLK_SPI0, "s3c6410-spi.0", "spi_busclk2"), ALIAS(SCLK_AUDIO1, "samsung-pcm.1", "audio-bus"), ALIAS(SCLK_AUDIO1, "samsung-i2s.1", "audio-bus"), ALIAS(SCLK_AUDIO0, "samsung-pcm.0", "audio-bus"), -- cgit v1.2.3-70-g09d2 From 0b1643b39ddae68f1b1b5ed848c8268a004a60a9 Mon Sep 17 00:00:00 2001 From: Rahul Sharma Date: Thu, 19 Jun 2014 11:17:16 +0530 Subject: clk/exynos5250: fix bit number for tv sysmmu clock Change bit from 2 to 9 for tv (mixer) sysmmu clock. Signed-off-by: Rahul Sharma Reviewed-by: Sachin Kamat Acked-by: Kukjin Kim Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos5250.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 1fad4c5e3f5..184f64293b2 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -661,7 +661,7 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = { GATE(CLK_RTC, "rtc", "div_aclk66", GATE_IP_PERIS, 20, 0, 0), GATE(CLK_TMU, "tmu", "div_aclk66", GATE_IP_PERIS, 21, 0, 0), GATE(CLK_SMMU_TV, "smmu_tv", "mout_aclk200_disp1_sub", - GATE_IP_DISP1, 2, 0, 0), + GATE_IP_DISP1, 9, 0, 0), GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "mout_aclk200_disp1_sub", GATE_IP_DISP1, 8, 0, 0), GATE(CLK_SMMU_2D, "smmu_2d", "div_aclk200", GATE_IP_ACP, 7, 0, 0), -- cgit v1.2.3-70-g09d2 From 44ff0254b89079a8a95e652635e760d93196ac1f Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Thu, 5 Jun 2014 13:35:14 -0700 Subject: clk: exynos5420: Remove aclk66_peric from the clock tree description The "aclk66_peric" clock is a gate clock with a whole bunch of gates underneath it. This big gate isn't very useful to include in our clock tree. If any of the children need to be turned on then the big gate will need to be on anyway. ...and there are plenty of other "big gates" that aren't described in our clock tree, some of which shut off collections of clocks that have no relationship in the hierarchy so are hard to model. "aclk66_peric" is causing earlyprintk problems since it gets disabled as part of the boot process, so let's just remove it. Strangely (and for no good reason) this clock is exported as part of the common clock bindings. Remove it since there are no in-kernel device trees using it and no reason anyone out of tree should refer to it either. Signed-off-by: Doug Anderson Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos5420.c | 85 ++++++++++++++++++++++------------ include/dt-bindings/clock/exynos5420.h | 1 - 2 files changed, 55 insertions(+), 31 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 9d7d7eed03f..61eccf0dd72 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -890,8 +890,6 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = { GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen", GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0), - GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric", - GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk266_isp", "mout_user_aclk266_isp", GATE_BUS_TOP, 13, 0, 0), GATE(0, "aclk166", "mout_user_aclk166", @@ -994,34 +992,61 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = { SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), /* PERIC Block */ - GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0), - GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0), - GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0), - GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0), - GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0), - GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0), - GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0), - GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0), - GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0), - GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0), - GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0), - GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0), - GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0), - GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0), - GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0), - GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0), - GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0), - GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0), - GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0), - GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0), - GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0), - GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0), - GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0), - GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0), - GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0), - GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0), - - GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0), + GATE(CLK_UART0, "uart0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 0, 0, 0), + GATE(CLK_UART1, "uart1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 1, 0, 0), + GATE(CLK_UART2, "uart2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 2, 0, 0), + GATE(CLK_UART3, "uart3", "mout_user_aclk66_peric", + GATE_IP_PERIC, 3, 0, 0), + GATE(CLK_I2C0, "i2c0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 6, 0, 0), + GATE(CLK_I2C1, "i2c1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 7, 0, 0), + GATE(CLK_I2C2, "i2c2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 8, 0, 0), + GATE(CLK_I2C3, "i2c3", "mout_user_aclk66_peric", + GATE_IP_PERIC, 9, 0, 0), + GATE(CLK_USI0, "usi0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 10, 0, 0), + GATE(CLK_USI1, "usi1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 11, 0, 0), + GATE(CLK_USI2, "usi2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 12, 0, 0), + GATE(CLK_USI3, "usi3", "mout_user_aclk66_peric", + GATE_IP_PERIC, 13, 0, 0), + GATE(CLK_I2C_HDMI, "i2c_hdmi", "mout_user_aclk66_peric", + GATE_IP_PERIC, 14, 0, 0), + GATE(CLK_TSADC, "tsadc", "mout_user_aclk66_peric", + GATE_IP_PERIC, 15, 0, 0), + GATE(CLK_SPI0, "spi0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 16, 0, 0), + GATE(CLK_SPI1, "spi1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 17, 0, 0), + GATE(CLK_SPI2, "spi2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 18, 0, 0), + GATE(CLK_I2S1, "i2s1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 20, 0, 0), + GATE(CLK_I2S2, "i2s2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 21, 0, 0), + GATE(CLK_PCM1, "pcm1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 22, 0, 0), + GATE(CLK_PCM2, "pcm2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 23, 0, 0), + GATE(CLK_PWM, "pwm", "mout_user_aclk66_peric", + GATE_IP_PERIC, 24, 0, 0), + GATE(CLK_SPDIF, "spdif", "mout_user_aclk66_peric", + GATE_IP_PERIC, 26, 0, 0), + GATE(CLK_USI4, "usi4", "mout_user_aclk66_peric", + GATE_IP_PERIC, 28, 0, 0), + GATE(CLK_USI5, "usi5", "mout_user_aclk66_peric", + GATE_IP_PERIC, 30, 0, 0), + GATE(CLK_USI6, "usi6", "mout_user_aclk66_peric", + GATE_IP_PERIC, 31, 0, 0), + + GATE(CLK_KEYIF, "keyif", "mout_user_aclk66_peric", + GATE_BUS_PERIC, 22, 0, 0), /* PERIS Block */ GATE(CLK_CHIPID, "chipid", "aclk66_psgen", diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h index 97dcb89d37d..14e1c8f9640 100644 --- a/include/dt-bindings/clock/exynos5420.h +++ b/include/dt-bindings/clock/exynos5420.h @@ -63,7 +63,6 @@ #define CLK_SCLK_MPHY_IXTAL24 161 /* gate clocks */ -#define CLK_ACLK66_PERIC 256 #define CLK_UART0 257 #define CLK_UART1 258 #define CLK_UART2 259 -- cgit v1.2.3-70-g09d2 From 970317aa48c6ef66cd023c039c2650c897bad927 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 30 Jun 2014 11:49:58 +0800 Subject: cgroup: fix mount failure in a corner case # cat test.sh #! /bin/bash mount -t cgroup -o cpu xxx /cgroup umount /cgroup mount -t cgroup -o cpu,cpuacct xxx /cgroup umount /cgroup # ./test.sh mount: xxx already mounted or /cgroup busy mount: according to mtab, xxx is already mounted on /cgroup It's because the cgroupfs_root of the first mount was under destruction asynchronously. Fix this by delaying and then retrying mount for this case. v3: - put the refcnt immediately after getting it. (Tejun) v2: - use percpu_ref_tryget_live() rather that introducing percpu_ref_alive(). (Tejun) - adjust comment. tj: Updated the comment a bit. Cc: # 3.15 Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- kernel/cgroup.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index d9a8be911f5..64068667be8 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1648,10 +1648,12 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type, int flags, const char *unused_dev_name, void *data) { + struct cgroup_subsys *ss; struct cgroup_root *root; struct cgroup_sb_opts opts; struct dentry *dentry; int ret; + int i; bool new_sb; /* @@ -1677,6 +1679,27 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type, goto out_unlock; } + /* + * Destruction of cgroup root is asynchronous, so subsystems may + * still be dying after the previous unmount. Let's drain the + * dying subsystems. We just need to ensure that the ones + * unmounted previously finish dying and don't care about new ones + * starting. Testing ref liveliness is good enough. + */ + for_each_subsys(ss, i) { + if (!(opts.subsys_mask & (1 << i)) || + ss->root == &cgrp_dfl_root) + continue; + + if (!percpu_ref_tryget_live(&ss->root->cgrp.self.refcnt)) { + mutex_unlock(&cgroup_mutex); + msleep(10); + ret = restart_syscall(); + goto out_free; + } + cgroup_put(&ss->root->cgrp); + } + for_each_root(root) { bool name_match = false; -- cgit v1.2.3-70-g09d2 From 4e26445faad366d67d7723622bf6a60a6f0f5993 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 30 Jun 2014 11:50:28 +0800 Subject: kernfs: introduce kernfs_pin_sb() kernfs_pin_sb() tries to get a refcnt of the superblock. This will be used by cgroupfs. v2: - make kernfs_pin_sb() return the superblock. - drop kernfs_drop_sb(). tj: Updated the comment a bit. [ This is a prerequisite for a bugfix. ] Cc: # 3.15 Acked-by: Greg Kroah-Hartman Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- fs/kernfs/mount.c | 30 ++++++++++++++++++++++++++++++ include/linux/kernfs.h | 1 + 2 files changed, 31 insertions(+) diff --git a/fs/kernfs/mount.c b/fs/kernfs/mount.c index d171b98a6cd..f973ae9b05f 100644 --- a/fs/kernfs/mount.c +++ b/fs/kernfs/mount.c @@ -211,6 +211,36 @@ void kernfs_kill_sb(struct super_block *sb) kernfs_put(root_kn); } +/** + * kernfs_pin_sb: try to pin the superblock associated with a kernfs_root + * @kernfs_root: the kernfs_root in question + * @ns: the namespace tag + * + * Pin the superblock so the superblock won't be destroyed in subsequent + * operations. This can be used to block ->kill_sb() which may be useful + * for kernfs users which dynamically manage superblocks. + * + * Returns NULL if there's no superblock associated to this kernfs_root, or + * -EINVAL if the superblock is being freed. + */ +struct super_block *kernfs_pin_sb(struct kernfs_root *root, const void *ns) +{ + struct kernfs_super_info *info; + struct super_block *sb = NULL; + + mutex_lock(&kernfs_mutex); + list_for_each_entry(info, &root->supers, node) { + if (info->ns == ns) { + sb = info->sb; + if (!atomic_inc_not_zero(&info->sb->s_active)) + sb = ERR_PTR(-EINVAL); + break; + } + } + mutex_unlock(&kernfs_mutex); + return sb; +} + void __init kernfs_init(void) { kernfs_node_cache = kmem_cache_create("kernfs_node_cache", diff --git a/include/linux/kernfs.h b/include/linux/kernfs.h index 17aa1cce6f8..20f49356491 100644 --- a/include/linux/kernfs.h +++ b/include/linux/kernfs.h @@ -304,6 +304,7 @@ struct dentry *kernfs_mount_ns(struct file_system_type *fs_type, int flags, struct kernfs_root *root, unsigned long magic, bool *new_sb_created, const void *ns); void kernfs_kill_sb(struct super_block *sb); +struct super_block *kernfs_pin_sb(struct kernfs_root *root, const void *ns); void kernfs_init(void); -- cgit v1.2.3-70-g09d2 From 3a32bd72d77058d768dbb38183ad517f720dd1bc Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 30 Jun 2014 11:50:59 +0800 Subject: cgroup: fix a race between cgroup_mount() and cgroup_kill_sb() We've converted cgroup to kernfs so cgroup won't be intertwined with vfs objects and locking, but there are dark areas. Run two instances of this script concurrently: for ((; ;)) { mount -t cgroup -o cpuacct xxx /cgroup umount /cgroup } After a while, I saw two mount processes were stuck at retrying, because they were waiting for a subsystem to become free, but the root associated with this subsystem never got freed. This can happen, if thread A is in the process of killing superblock but hasn't called percpu_ref_kill(), and at this time thread B is mounting the same cgroup root and finds the root in the root list and performs percpu_ref_try_get(). To fix this, we try to increase both the refcnt of the superblock and the percpu refcnt of cgroup root. v2: - we should try to get both the superblock refcnt and cgroup_root refcnt, because cgroup_root may have no superblock assosiated with it. - adjust/add comments. tj: Updated comments. Renamed @sb to @pinned_sb. Cc: # 3.15 Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- kernel/cgroup.c | 33 ++++++++++++++++++++++++++------- 1 file changed, 26 insertions(+), 7 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 64068667be8..70776aec256 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1648,6 +1648,7 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type, int flags, const char *unused_dev_name, void *data) { + struct super_block *pinned_sb = NULL; struct cgroup_subsys *ss; struct cgroup_root *root; struct cgroup_sb_opts opts; @@ -1740,15 +1741,23 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type, } /* - * A root's lifetime is governed by its root cgroup. - * tryget_live failure indicate that the root is being - * destroyed. Wait for destruction to complete so that the - * subsystems are free. We can use wait_queue for the wait - * but this path is super cold. Let's just sleep for a bit - * and retry. + * We want to reuse @root whose lifetime is governed by its + * ->cgrp. Let's check whether @root is alive and keep it + * that way. As cgroup_kill_sb() can happen anytime, we + * want to block it by pinning the sb so that @root doesn't + * get killed before mount is complete. + * + * With the sb pinned, tryget_live can reliably indicate + * whether @root can be reused. If it's being killed, + * drain it. We can use wait_queue for the wait but this + * path is super cold. Let's just sleep a bit and retry. */ - if (!percpu_ref_tryget_live(&root->cgrp.self.refcnt)) { + pinned_sb = kernfs_pin_sb(root->kf_root, NULL); + if (IS_ERR(pinned_sb) || + !percpu_ref_tryget_live(&root->cgrp.self.refcnt)) { mutex_unlock(&cgroup_mutex); + if (!IS_ERR_OR_NULL(pinned_sb)) + deactivate_super(pinned_sb); msleep(10); ret = restart_syscall(); goto out_free; @@ -1793,6 +1802,16 @@ out_free: CGROUP_SUPER_MAGIC, &new_sb); if (IS_ERR(dentry) || !new_sb) cgroup_put(&root->cgrp); + + /* + * If @pinned_sb, we're reusing an existing root and holding an + * extra ref on its sb. Mount is complete. Put the extra ref. + */ + if (pinned_sb) { + WARN_ON(new_sb); + deactivate_super(pinned_sb); + } + return dentry; } -- cgit v1.2.3-70-g09d2 From d0f9d64a0b8fb3399ca8dd0d54f4d305492c9217 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Fri, 20 Jun 2014 15:03:06 +0800 Subject: Thermal: imx: correct critical trip temperature setting On latest i.MX6 SOC with thermal calibration data of 0x5A100000, the critical trip temperature will be an invalid value and cause system auto shutdown as below log: thermal thermal_zone0: critical temperature reached(42 C),shutting down So, with universal formula for thermal sensor, only room temperature point is calibrated, which means the calibration data read from fuse only has valid data of bit [31:20], others are all 0, the critical trip point temperature can NOT depend on the hot point calibration data, here we set it to 20 C higher than default passive temperature. Signed-off-by: Anson Huang Acked-by: Shawn Guo Signed-off-by: Zhang Rui --- drivers/thermal/imx_thermal.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index a99c63152b8..2c516f2eebe 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -306,7 +306,7 @@ static int imx_get_sensor_data(struct platform_device *pdev) { struct imx_thermal_data *data = platform_get_drvdata(pdev); struct regmap *map; - int t1, t2, n1, n2; + int t1, n1; int ret; u32 val; u64 temp64; @@ -333,14 +333,10 @@ static int imx_get_sensor_data(struct platform_device *pdev) /* * Sensor data layout: * [31:20] - sensor value @ 25C - * [19:8] - sensor value of hot - * [7:0] - hot temperature value * Use universal formula now and only need sensor value @ 25C * slope = 0.4297157 - (0.0015976 * 25C fuse) */ n1 = val >> 20; - n2 = (val & 0xfff00) >> 8; - t2 = val & 0xff; t1 = 25; /* t1 always 25C */ /* @@ -366,16 +362,16 @@ static int imx_get_sensor_data(struct platform_device *pdev) data->c2 = n1 * data->c1 + 1000 * t1; /* - * Set the default passive cooling trip point to 20 °C below the - * maximum die temperature. Can be changed from userspace. + * Set the default passive cooling trip point, + * can be changed from userspace. */ - data->temp_passive = 1000 * (t2 - 20); + data->temp_passive = IMX_TEMP_PASSIVE; /* - * The maximum die temperature is t2, let's give 5 °C cushion - * for noise and possible temperature rise between measurements. + * The maximum die temperature set to 20 C higher than + * IMX_TEMP_PASSIVE. */ - data->temp_critical = 1000 * (t2 - 5); + data->temp_critical = 1000 * 20 + data->temp_passive; return 0; } -- cgit v1.2.3-70-g09d2 From fbe2ddcdcca9c15558533cb75e5161152338b548 Mon Sep 17 00:00:00 2001 From: Rickard Strandqvist Date: Mon, 2 Jun 2014 23:25:30 +0200 Subject: thermal: ti-soc-thermal: ti-bandgap.c: Cleaning up wrong address is checked Wrong address is checked after memory allocation. Signed-off-by: Rickard Strandqvist Signed-off-by: Zhang Rui --- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index a1271b55103..634b6ce0e63 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -1155,7 +1155,7 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev) /* register shadow for context save and restore */ bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) * bgp->conf->sensor_count, GFP_KERNEL); - if (!bgp) { + if (!bgp->regval) { dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n"); return ERR_PTR(-ENOMEM); } -- cgit v1.2.3-70-g09d2 From 6b533269fb2513a1281a878e316bb920fc54db31 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Mon, 2 Jun 2014 18:08:17 +0100 Subject: tools/thermal: tmon: fix compilation errors when building statically tmon fails to build statically with the following error: $ make LDFLAGS=-static gcc -O1 -Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int -fstack-protector -D VERSION=\"1.0\" -static tmon.o tui.o sysfs.o pid.o -o tmon -lm -lpanel -lncursesw -lpthread tmon.o: In function `tmon_sig_handler': tmon.c:(.text+0x21): undefined reference to `stdscr' tmon.o: In function `tmon_cleanup': tmon.c:(.text+0xb9): undefined reference to `stdscr' tmon.c:(.text+0x11e): undefined reference to `stdscr' tmon.c:(.text+0x123): undefined reference to `keypad' tmon.c:(.text+0x12d): undefined reference to `nocbreak' tmon.o: In function `main': tmon.c:(.text+0x785): undefined reference to `stdscr' tmon.c:(.text+0x78a): undefined reference to `nodelay' tui.o: In function `setup_windows': tui.c:(.text+0x131): undefined reference to `stdscr' tui.c:(.text+0x176): undefined reference to `stdscr' tui.c:(.text+0x19f): undefined reference to `stdscr' tui.c:(.text+0x1cc): undefined reference to `stdscr' tui.c:(.text+0x1ff): undefined reference to `stdscr' tui.o:tui.c:(.text+0x229): more undefined references to `stdscr' follow tui.o: In function `show_cooling_device': [...] stdscr() and friends are in libtinfo (part of ncurses) so add it to the libraries that are linked in when compiling tmon to fix it. Cc: Jacob Pan Cc: Zhang Rui Signed-off-by: Javi Merino Acked-by: Jacob Pan --- tools/thermal/tmon/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/thermal/tmon/Makefile b/tools/thermal/tmon/Makefile index 447321104ec..e775adcbd29 100644 --- a/tools/thermal/tmon/Makefile +++ b/tools/thermal/tmon/Makefile @@ -21,7 +21,7 @@ OBJS = tmon.o tui.o sysfs.o pid.o OBJS += tmon: $(OBJS) Makefile tmon.h - $(CC) ${CFLAGS} $(LDFLAGS) $(OBJS) -o $(TARGET) -lm -lpanel -lncursesw -lpthread + $(CC) ${CFLAGS} $(LDFLAGS) $(OBJS) -o $(TARGET) -lm -lpanel -lncursesw -ltinfo -lpthread valgrind: tmon sudo valgrind -v --track-origins=yes --tool=memcheck --leak-check=yes --show-reachable=yes --num-callers=20 --track-fds=yes ./$(TARGET) 1> /dev/null -- cgit v1.2.3-70-g09d2 From 13bbfb5c4eb4fc85bf977245f9b3624df0187184 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 26 May 2014 14:52:34 +0200 Subject: dma: cppi41: handle 0-length packets When a 0-length packet is received on the bus, desc->pd0 yields 1, which confuses the driver's users. This information is clearly wrong and not in accordance to the datasheet, but it's been observed on an AM335x board, very reproducible. Fix this by looking at bit 19 in PD2 of the completed packet. This bit will tell us if a zero-length packet was received on a queue. If it's set, ignore the value in PD0 and report a total length of 0 instead. Signed-off-by: Daniel Mack Signed-off-by: Vinod Koul --- drivers/dma/cppi41.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c index d028f36ae65..8f8b0b60887 100644 --- a/drivers/dma/cppi41.c +++ b/drivers/dma/cppi41.c @@ -86,6 +86,9 @@ #define USBSS_IRQ_PD_COMP (1 << 2) +/* Packet Descriptor */ +#define PD2_ZERO_LENGTH (1 << 19) + struct cppi41_channel { struct dma_chan chan; struct dma_async_tx_descriptor txd; @@ -307,7 +310,7 @@ static irqreturn_t cppi41_irq(int irq, void *data) __iormb(); while (val) { - u32 desc; + u32 desc, len; q_num = __fls(val); val &= ~(1 << q_num); @@ -319,9 +322,13 @@ static irqreturn_t cppi41_irq(int irq, void *data) q_num, desc); continue; } - c->residue = pd_trans_len(c->desc->pd6) - - pd_trans_len(c->desc->pd0); + if (c->desc->pd2 & PD2_ZERO_LENGTH) + len = 0; + else + len = pd_trans_len(c->desc->pd0); + + c->residue = pd_trans_len(c->desc->pd6) - len; dma_cookie_complete(&c->txd); c->txd.callback(c->txd.callback_param); } -- cgit v1.2.3-70-g09d2 From d1a792f3b4072bfac4150bb62aa34917b77fdb6d Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Wed, 25 Jun 2014 13:00:33 +0100 Subject: Update imx-sdma cyclic handling to report residue I received a report this morning from one of the Novena developers that the behaviour of the iMX6 ASoC codec driver (using imx-pcm-dma.c) was sub-optimal under high system load. While there are issues relating to system load remaining, upon reviewing the ASoC imx-pcm-dma.c driver, it was noticed that it not using the residue support, because SDMA doesn't support it. This has the effect that SDMA has to make multiple calls into the ASoC and ALSA code, one for each period. Since ALSA's snd_pcm_elapsed() does not need to be called multiple times and it is entirely sufficient to call it once to update ALSA with the current buffer position via the pointer method, we can do better here. We can also avoid stopping the DMA entirely, just like real cyclic DMA implementations behave. While this means that we replay some old samples, this is a nicer behaviour than having audio stop and restart. The changes to achieve this are relatively minor - imx-sdma.c can track where the DMA is to the nearest descriptor boundary - it does this already when deciding how many callbacks to issue. In doing this, buf_tail always points at the descriptor which will complete next. The residue is defined by the bytes remaining to the end of the buffer, when the buffer is viewed as a single block of memory [start...end]. So, when we start out, there's a full buffer worth of residue, and this counts down as we approach the end of the buffer, eventually becoming zero at the end, before returning to the full buffer worth when we wrap back to the start. Moving the walking of the descriptors into the interrupt handler means that we can update the BD_DONE flag at interrupt time, thus avoiding a delayed tasklet stopping the cyclic DMA. This means that the residue can be calculated from (total descriptors - buf_tail) * descriptor size. This is what the change below does. We update imx-pcm-dma.c to remove the NO_RESIDUE flag since we now provide the residue. Signed-off-by: Russell King Tested-by: Shawn Guo Signed-off-by: Vinod Koul --- drivers/dma/imx-sdma.c | 22 ++++++++++++++++++---- sound/soc/fsl/imx-pcm-dma.c | 1 - 2 files changed, 18 insertions(+), 5 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 128714622bf..14867e3ac8f 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -255,6 +255,7 @@ struct sdma_channel { enum dma_slave_buswidth word_size; unsigned int buf_tail; unsigned int num_bd; + unsigned int period_len; struct sdma_buffer_descriptor *bd; dma_addr_t bd_phys; unsigned int pc_from_device, pc_to_device; @@ -592,6 +593,12 @@ static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event) } static void sdma_handle_channel_loop(struct sdma_channel *sdmac) +{ + if (sdmac->desc.callback) + sdmac->desc.callback(sdmac->desc.callback_param); +} + +static void sdma_update_channel_loop(struct sdma_channel *sdmac) { struct sdma_buffer_descriptor *bd; @@ -611,9 +618,6 @@ static void sdma_handle_channel_loop(struct sdma_channel *sdmac) bd->mode.status |= BD_DONE; sdmac->buf_tail++; sdmac->buf_tail %= sdmac->num_bd; - - if (sdmac->desc.callback) - sdmac->desc.callback(sdmac->desc.callback_param); } } @@ -669,6 +673,9 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id) int channel = fls(stat) - 1; struct sdma_channel *sdmac = &sdma->channel[channel]; + if (sdmac->flags & IMX_DMA_SG_LOOP) + sdma_update_channel_loop(sdmac); + tasklet_schedule(&sdmac->tasklet); __clear_bit(channel, &stat); @@ -1129,6 +1136,7 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( sdmac->status = DMA_IN_PROGRESS; sdmac->buf_tail = 0; + sdmac->period_len = period_len; sdmac->flags |= IMX_DMA_SG_LOOP; sdmac->direction = direction; @@ -1225,9 +1233,15 @@ static enum dma_status sdma_tx_status(struct dma_chan *chan, struct dma_tx_state *txstate) { struct sdma_channel *sdmac = to_sdma_chan(chan); + u32 residue; + + if (sdmac->flags & IMX_DMA_SG_LOOP) + residue = (sdmac->num_bd - sdmac->buf_tail) * sdmac->period_len; + else + residue = sdmac->chn_count - sdmac->chn_real_count; dma_set_tx_state(txstate, chan->completed_cookie, chan->cookie, - sdmac->chn_count - sdmac->chn_real_count); + residue); return sdmac->status; } diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c index 0849b7b83f0..0db94f492e9 100644 --- a/sound/soc/fsl/imx-pcm-dma.c +++ b/sound/soc/fsl/imx-pcm-dma.c @@ -59,7 +59,6 @@ int imx_pcm_dma_init(struct platform_device *pdev) { return devm_snd_dmaengine_pcm_register(&pdev->dev, &imx_dmaengine_pcm_config, - SND_DMAENGINE_PCM_FLAG_NO_RESIDUE | SND_DMAENGINE_PCM_FLAG_COMPAT); } EXPORT_SYMBOL_GPL(imx_pcm_dma_init); -- cgit v1.2.3-70-g09d2 From 951fda3d8c644597a1d5cdae14cab31567e754a1 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 17 Jun 2014 16:05:08 -0400 Subject: tmon: Check log file for common secuirty issues The tmon logging system blindly opens its log file on a static path, making it very easy for someone to redirect that log information to inappropriate places or overwrite other users data. Do some easy checking to make sure we're not logging to a symlink or a file owned by another user. Signed-off-by: Neil Horman Acked-by: Jacob Pan Signed-off-by: Zhang Rui --- tools/thermal/tmon/tmon.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/thermal/tmon/tmon.c b/tools/thermal/tmon/tmon.c index b30f531173e..059e0becb38 100644 --- a/tools/thermal/tmon/tmon.c +++ b/tools/thermal/tmon/tmon.c @@ -142,6 +142,7 @@ static void start_syslog(void) static void prepare_logging(void) { int i; + struct stat logstat; if (!logging) return; @@ -152,6 +153,29 @@ static void prepare_logging(void) return; } + if (lstat(TMON_LOG_FILE, &logstat) < 0) { + syslog(LOG_ERR, "Unable to stat log file %s\n", TMON_LOG_FILE); + fclose(tmon_log); + tmon_log = NULL; + return; + } + + /* The log file must be a regular file owned by us */ + if (S_ISLNK(logstat.st_mode)) { + syslog(LOG_ERR, "Log file is a symlink. Will not log\n"); + fclose(tmon_log); + tmon_log = NULL; + return; + } + + if (logstat.st_uid != getuid()) { + syslog(LOG_ERR, "We don't own the log file. Not logging\n"); + fclose(tmon_log); + tmon_log = NULL; + return; + } + + fprintf(tmon_log, "#----------- THERMAL SYSTEM CONFIG -------------\n"); for (i = 0; i < ptdata.nr_tz_sensor; i++) { char binding_str[33]; /* size of long + 1 */ -- cgit v1.2.3-70-g09d2 From 4adccf9fc84aaf5e4d18442e163d549e0b603075 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 17 Jun 2014 16:05:09 -0400 Subject: tmon: set umask to a reasonable value Currently, the tmon umask value is set to 0, which means whatever the permission mask in the shell are when starting tmon in daemon mode are what the permissions of any created files will be. We should likely set something more explicit, so lets go with the usual 022 Signed-off-by: Neil Horman Acked-by: Jacob Pan Signed-off-by: Zhang Rui --- tools/thermal/tmon/tmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/thermal/tmon/tmon.c b/tools/thermal/tmon/tmon.c index 059e0becb38..09b7c321833 100644 --- a/tools/thermal/tmon/tmon.c +++ b/tools/thermal/tmon/tmon.c @@ -355,7 +355,7 @@ static void start_daemon_mode() disable_tui(); /* change the file mode mask */ - umask(0); + umask(S_IWGRP | S_IWOTH); /* new SID for the daemon process */ sid = setsid(); -- cgit v1.2.3-70-g09d2 From 76bb5ab8f6e3e7bebdcefec4146ff305e7d0b465 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 30 Jun 2014 15:47:32 -0400 Subject: cpuset: break kernfs active protection in cpuset_write_resmask() Writing to either "cpuset.cpus" or "cpuset.mems" file flushes cpuset_hotplug_work so that cpu or memory hotunplug doesn't end up migrating tasks off a cpuset after new resources are added to it. As cpuset_hotplug_work calls into cgroup core via cgroup_transfer_tasks(), this flushing adds the dependency to cgroup core locking from cpuset_write_resmak(). This used to be okay because cgroup interface files were protected by a different mutex; however, 8353da1f91f1 ("cgroup: remove cgroup_tree_mutex") simplified the cgroup core locking and this dependency became a deadlock hazard - cgroup file removal performed under cgroup core lock tries to drain on-going file operation which is trying to flush cpuset_hotplug_work blocked on the same cgroup core lock. The locking simplification was done because kernfs added an a lot easier way to deal with circular dependencies involving kernfs active protection. Let's use the same strategy in cpuset and break active protection in cpuset_write_resmask(). While it isn't the prettiest, this is a very rare, likely unique, situation which also goes away on the unified hierarchy. The commands to trigger the deadlock warning without the patch and the lockdep output follow. localhost:/ # mount -t cgroup -o cpuset xxx /cpuset localhost:/ # mkdir /cpuset/tmp localhost:/ # echo 1 > /cpuset/tmp/cpuset.cpus localhost:/ # echo 0 > cpuset/tmp/cpuset.mems localhost:/ # echo $$ > /cpuset/tmp/tasks localhost:/ # echo 0 > /sys/devices/system/cpu/cpu1/online ====================================================== [ INFO: possible circular locking dependency detected ] 3.16.0-rc1-0.1-default+ #7 Not tainted ------------------------------------------------------- kworker/1:0/32649 is trying to acquire lock: (cgroup_mutex){+.+.+.}, at: [] cgroup_transfer_tasks+0x37/0x150 but task is already holding lock: (cpuset_hotplug_work){+.+...}, at: [] process_one_work+0x192/0x520 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (cpuset_hotplug_work){+.+...}: ... -> #1 (s_active#175){++++.+}: ... -> #0 (cgroup_mutex){+.+.+.}: ... other info that might help us debug this: Chain exists of: cgroup_mutex --> s_active#175 --> cpuset_hotplug_work Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuset_hotplug_work); lock(s_active#175); lock(cpuset_hotplug_work); lock(cgroup_mutex); *** DEADLOCK *** 2 locks held by kworker/1:0/32649: #0: ("events"){.+.+.+}, at: [] process_one_work+0x192/0x520 #1: (cpuset_hotplug_work){+.+...}, at: [] process_one_work+0x192/0x520 stack backtrace: CPU: 1 PID: 32649 Comm: kworker/1:0 Not tainted 3.16.0-rc1-0.1-default+ #7 ... Call Trace: [] dump_stack+0x72/0x8a [] print_circular_bug+0x10f/0x120 [] check_prev_add+0x43e/0x4b0 [] validate_chain+0x656/0x7c0 [] __lock_acquire+0x382/0x660 [] lock_acquire+0xf9/0x170 [] mutex_lock_nested+0x6f/0x380 [] cgroup_transfer_tasks+0x37/0x150 [] hotplug_update_tasks_insane+0x110/0x1d0 [] cpuset_hotplug_update_tasks+0x13d/0x180 [] cpuset_hotplug_workfn+0x18c/0x630 [] process_one_work+0x254/0x520 [] worker_thread+0x13d/0x3d0 [] kthread+0xf8/0x100 [] ret_from_fork+0x7c/0xb0 Signed-off-by: Tejun Heo Reported-by: Li Zefan Tested-by: Li Zefan --- kernel/cpuset.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index d3df02e7664..116a4164720 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1623,7 +1623,17 @@ static ssize_t cpuset_write_resmask(struct kernfs_open_file *of, * resources, wait for the previously scheduled operations before * proceeding, so that we don't end up keep removing tasks added * after execution capability is restored. + * + * cpuset_hotplug_work calls back into cgroup core via + * cgroup_transfer_tasks() and waiting for it from a cgroupfs + * operation like this one can lead to a deadlock through kernfs + * active_ref protection. Let's break the protection. Losing the + * protection is okay as we check whether @cs is online after + * grabbing cpuset_mutex anyway. This only happens on the legacy + * hierarchies. */ + css_get(&cs->css); + kernfs_break_active_protection(of->kn); flush_work(&cpuset_hotplug_work); mutex_lock(&cpuset_mutex); @@ -1651,6 +1661,8 @@ static ssize_t cpuset_write_resmask(struct kernfs_open_file *of, free_trial_cpuset(trialcs); out_unlock: mutex_unlock(&cpuset_mutex); + kernfs_unbreak_active_protection(of->kn); + css_put(&cs->css); return retval ?: nbytes; } -- cgit v1.2.3-70-g09d2 From 330d282216d6e4d845a21b72572dc4df4122e8fa Mon Sep 17 00:00:00 2001 From: Zhengyu He Date: Tue, 1 Jul 2014 12:11:47 -0700 Subject: core: fix typo in percpu read_mostly section This fixes a typo that named the read_mostly section of percpu as readmostly. It works fine with SMP because the linker script specifies .data..percpu..readmostly. However, UP kernel builds don't have percpu sections defined and the non-percpu version of the section is called data..read_mostly, so .data..readmostly will float around and may break things unexpectedly. Looking at the original change that introduced data..percpu..readmostly (commit c957ef2c59e952803766ddc22e89981ab534606f), it looks like this was the original intention. Tested: Built UP kernel and confirmed the sections got merged. - Before the patch: $ objdump -h vmlinux.o | grep '\.data\.\.read.*mostly' 38 .data..read_mostly 00004418 0000000000000000 0000000000000000 00431ac0 2**6 50 .data..readmostly 00000014 0000000000000000 0000000000000000 00444000 2**3 - After the patch: $ objdump -h vmlinux.o | grep '\.data\.\.read.*mostly' 38 .data..read_mostly 00004438 0000000000000000 0000000000000000 00431ac0 2**6 Signed-off-by: Zhengyu He Signed-off-by: Filipe Brandenburger Signed-off-by: Tejun Heo --- include/asm-generic/vmlinux.lds.h | 2 +- include/linux/percpu-defs.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 471ba48c7ae..c1c0b0cf39b 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -693,7 +693,7 @@ . = ALIGN(PAGE_SIZE); \ *(.data..percpu..page_aligned) \ . = ALIGN(cacheline); \ - *(.data..percpu..readmostly) \ + *(.data..percpu..read_mostly) \ . = ALIGN(cacheline); \ *(.data..percpu) \ *(.data..percpu..shared_aligned) \ diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h index a5fc7d01aad..dec01d6c3f8 100644 --- a/include/linux/percpu-defs.h +++ b/include/linux/percpu-defs.h @@ -146,10 +146,10 @@ * Declaration/definition used for per-CPU variables that must be read mostly. */ #define DECLARE_PER_CPU_READ_MOSTLY(type, name) \ - DECLARE_PER_CPU_SECTION(type, name, "..readmostly") + DECLARE_PER_CPU_SECTION(type, name, "..read_mostly") #define DEFINE_PER_CPU_READ_MOSTLY(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, "..readmostly") + DEFINE_PER_CPU_SECTION(type, name, "..read_mostly") /* * Intermodule exports for per-CPU variables. sparse forgets about -- cgit v1.2.3-70-g09d2 From 4332ec1a99510943e50acbe03d6c023d5e327093 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 17 Jun 2014 17:03:24 +0300 Subject: clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled Define ti_clk_register_dpll_x2() and of_ti_am3_dpll_x2_setup() if AM43XX is defined. Fixes the below boot issue. [ 2.157258] gpmc_l3_clk not enabled [ 2.161194] gpmc_l3_clk not enabled [ 2.164896] Division by zero in kernel. [ 2.169055] CPU: 0 PID: 321 Comm: kworker/u2:2 Tainted: G W 3.16.0-rc1-00008-g4c0e520 #273 [ 2.178880] Workqueue: deferwq deferred_probe_work_func [ 2.184459] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.192752] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 2.200486] [] (dump_stack) from [] (Ldiv0+0x8/0x10) [ 2.207678] [] (Ldiv0) from [] (gpmc_calc_divider+0x24/0x40) [ 2.215490] [] (gpmc_calc_divider) from [] (gpmc_cs_set_timings+0x18/0x474) [ 2.224783] [] (gpmc_cs_set_timings) from [] (gpmc_nand_init+0x74/0x1a8) [ 2.233791] [] (gpmc_nand_init) from [] (gpmc_probe+0x52c/0x874) [ 2.242089] [] (gpmc_probe) from [] (platform_drv_probe+0x18/0x48) [ 2.250534] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 2.259988] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 2.269087] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 2.277620] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 2.286074] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x90) [ 2.295611] [] (deferred_probe_work_func) from [] (process_one_work+0x1b4/0x4bc) [ 2.305288] [] (process_one_work) from [] (worker_thread+0x148/0x550) [ 2.313954] [] (worker_thread) from [] (kthread+0xc8/0xe4) [ 2.321628] [] (kthread) from [] (ret_from_fork+0x14/0x2c) Signed-off-by: Roger Quadros Signed-off-by: Mike Turquette --- drivers/clk/ti/dpll.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index abd956d5f83..79791e1bf28 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -161,7 +161,8 @@ cleanup: } #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) /** * ti_clk_register_dpll_x2 - Registers a DPLLx2 clock * @node: device node for this clock @@ -322,7 +323,7 @@ CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock", of_ti_omap4_dpll_x2_setup); #endif -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) static void __init of_ti_am3_dpll_x2_setup(struct device_node *node) { ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL); -- cgit v1.2.3-70-g09d2 From 2a96dfa49c83a2a7cbdb11382976aaa6b2636764 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 27 Jun 2014 14:21:10 +0200 Subject: clk: s2mps11: Fix double free corruption during driver unbind After unbinding the driver memory was corrupted by double free of clk_lookup structure. This lead to OOPS when re-binding the driver again. The driver allocated memory for 'clk_lookup' with devm_kzalloc. During driver removal this memory was freed twice: once by clkdev_drop() and second by devm code. Kernel panic log: [ 30.839284] Unable to handle kernel paging request at virtual address 5f343173 [ 30.846476] pgd = dee14000 [ 30.849165] [5f343173] *pgd=00000000 [ 30.852703] Internal error: Oops: 805 [#1] PREEMPT SMP ARM [ 30.858166] Modules linked in: [ 30.861208] CPU: 0 PID: 1 Comm: bash Not tainted 3.16.0-rc2-00239-g94bdf617b07e-dirty #40 [ 30.869364] task: df478000 ti: df480000 task.ti: df480000 [ 30.874752] PC is at clkdev_add+0x2c/0x38 [ 30.878738] LR is at clkdev_add+0x18/0x38 [ 30.882732] pc : [] lr : [] psr: 60000013 [ 30.882732] sp : df481e78 ip : 00000001 fp : c0700ed8 [ 30.894187] r10: 0000000c r9 : 00000000 r8 : c07b0e3c [ 30.899396] r7 : 00000002 r6 : df45f9d0 r5 : df421390 r4 : c0700d6c [ 30.905906] r3 : 5f343173 r2 : c0700d84 r1 : 60000013 r0 : c0700d6c [ 30.912417] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 30.919534] Control: 10c53c7d Table: 5ee1406a DAC: 00000015 [ 30.925262] Process bash (pid: 1, stack limit = 0xdf480240) [ 30.930817] Stack: (0xdf481e78 to 0xdf482000) [ 30.935159] 1e60: 00001000 df6de610 [ 30.943321] 1e80: df7f4558 c0355650 c05ec6ec c0700eb0 df6de600 df7f4510 dec9d69c 00000014 [ 30.951480] 1ea0: 00167b48 df6de610 c0700e30 c0713518 00000000 c0700e30 dec9d69c 00000006 [ 30.959639] 1ec0: 00167b48 c02c1b7c c02c1b64 df6de610 c07aff48 c02c0420 c06fb150 c047cc20 [ 30.967798] 1ee0: df6de610 df6de610 c0700e30 df6de644 c06fb150 0000000c dec9d690 c02bef90 [ 30.975957] 1f00: dec9c6c0 dece4c00 df481f80 dece4c00 0000000c c02be73c 0000000c c016ca8c [ 30.984116] 1f20: c016ca48 00000000 00000000 c016c1f4 00000000 00000000 b6f18000 df481f80 [ 30.992276] 1f40: df7f66c0 0000000c df480000 df480000 b6f18000 c011094c df47839c 60000013 [ 31.000435] 1f60: 00000000 00000000 df7f66c0 df7f66c0 0000000c df480000 b6f18000 c0110dd4 [ 31.008594] 1f80: 00000000 00000000 0000000c b6ec05d8 0000000c b6f18000 00000004 c000f2a8 [ 31.016753] 1fa0: 00001000 c000f0e0 b6ec05d8 0000000c 00000001 b6f18000 0000000c 00000000 [ 31.024912] 1fc0: b6ec05d8 0000000c b6f18000 00000004 0000000c 00000001 00000000 00167b48 [ 31.033071] 1fe0: 00000000 bed83a80 b6e004f0 b6e5122c 60000010 00000001 ffffffff ffffffff [ 31.041248] [] (clkdev_add) from [] (s2mps11_clk_probe+0x2b4/0x3b4) [ 31.049223] [] (s2mps11_clk_probe) from [] (platform_drv_probe+0x18/0x48) [ 31.057728] [] (platform_drv_probe) from [] (driver_probe_device+0x13c/0x384) [ 31.066579] [] (driver_probe_device) from [] (bind_store+0x88/0xd8) [ 31.074564] [] (bind_store) from [] (drv_attr_store+0x20/0x2c) [ 31.082118] [] (drv_attr_store) from [] (sysfs_kf_write+0x44/0x48) [ 31.090016] [] (sysfs_kf_write) from [] (kernfs_fop_write+0xc0/0x17c) [ 31.098176] [] (kernfs_fop_write) from [] (vfs_write+0xa0/0x1c4) [ 31.105899] [] (vfs_write) from [] (SyS_write+0x40/0x8c) [ 31.112931] [] (SyS_write) from [] (ret_fast_syscall+0x0/0x3c) [ 31.120481] Code: e2842018 e584501c e1a00004 e885000c (e5835000) [ 31.126596] ---[ end trace efad45bfa3a61b05 ]--- [ 31.131181] Kernel panic - not syncing: Fatal exception [ 31.136368] CPU1: stopping [ 31.139054] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.16.0-rc2-00239-g94bdf617b07e-dirty #40 [ 31.148697] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 31.156419] [] (show_stack) from [] (dump_stack+0x80/0xcc) [ 31.163622] [] (dump_stack) from [] (handle_IPI+0x130/0x15c) [ 31.170998] [] (handle_IPI) from [] (gic_handle_irq+0x60/0x68) [ 31.178549] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x70) [ 31.186009] Exception stack(0xdf4bdf88 to 0xdf4bdfd0) [ 31.191046] df80: ffffffed 00000000 00000000 00000000 df4bc000 c06d042c [ 31.199207] dfa0: 00000000 ffffffed c06d03c0 00000000 c070c288 00000000 00000000 df4bdfd0 [ 31.207363] dfc0: c0010324 c0010328 60000013 ffffffff [ 31.212402] [] (__irq_svc) from [] (arch_cpu_idle+0x28/0x30) [ 31.219783] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x2c4/0x3f0) [ 31.228027] [] (cpu_startup_entry) from [<400086c4>] (0x400086c4) [ 31.234968] ---[ end Kernel panic - not syncing: Fatal exception Fixes: 7cc560dea415 ("clk: s2mps11: Add support for s2mps11") Cc: Signed-off-by: Krzysztof Kozlowski Reviewed-by: Yadwinder Singh Brar Signed-off-by: Mike Turquette --- drivers/clk/clk-s2mps11.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c index 9b7b5859a42..3757e9e72d3 100644 --- a/drivers/clk/clk-s2mps11.c +++ b/drivers/clk/clk-s2mps11.c @@ -230,16 +230,13 @@ static int s2mps11_clk_probe(struct platform_device *pdev) goto err_reg; } - s2mps11_clk->lookup = devm_kzalloc(&pdev->dev, - sizeof(struct clk_lookup), GFP_KERNEL); + s2mps11_clk->lookup = clkdev_alloc(s2mps11_clk->clk, + s2mps11_name(s2mps11_clk), NULL); if (!s2mps11_clk->lookup) { ret = -ENOMEM; goto err_lup; } - s2mps11_clk->lookup->con_id = s2mps11_name(s2mps11_clk); - s2mps11_clk->lookup->clk = s2mps11_clk->clk; - clkdev_add(s2mps11_clk->lookup); } -- cgit v1.2.3-70-g09d2 From c3dcac875e35c2e67ccaef10ef62ae5b1410d29c Mon Sep 17 00:00:00 2001 From: Himangi Saraogi Date: Sat, 28 Jun 2014 22:53:55 +0530 Subject: clk: sunxi: fix devm_ioremap_resource error detection code devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // Signed-off-by: Himangi Saraogi Acked-by: Julia Lawall Acked-by Boris BREZILLON Signed-off-by: Mike Turquette --- drivers/clk/sunxi/clk-sun6i-apb0-gates.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c index 44cd27c5c40..670f90d629d 100644 --- a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c +++ b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c @@ -29,7 +29,7 @@ static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_MEM, 0); reg = devm_ioremap_resource(&pdev->dev, r); - if (!reg) + if (IS_ERR(reg)) return PTR_ERR(reg); clk_parent = of_clk_get_parent_name(np, 0); -- cgit v1.2.3-70-g09d2 From 48f7bc86b6e75bcb71441c77378c1cde6ecbe475 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Thu, 23 Jan 2014 15:05:49 -0500 Subject: ARM: kprobes: Prevent known test failures stopping other tests running Due to a long-standing issue with Thumb symbol lookup [1] the jprobes tests fail when built into a kernel compiled as Thumb mode. (They work fine for ARM mode kernels or for Thumb when built as a loadable module.) Rather than have this problem terminate testing prematurely lets instead emit an error message and carry on with the main kprobes tests, delaying the final failure report until the end. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-August/063026.html Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c index 379639998d5..08d731294bc 100644 --- a/arch/arm/kernel/kprobes-test.c +++ b/arch/arm/kernel/kprobes-test.c @@ -225,6 +225,7 @@ static int pre_handler_called; static int post_handler_called; static int jprobe_func_called; static int kretprobe_handler_called; +static int tests_failed; #define FUNC_ARG1 0x12345678 #define FUNC_ARG2 0xabcdef @@ -461,6 +462,13 @@ static int run_api_tests(long (*func)(long, long)) pr_info(" jprobe\n"); ret = test_jprobe(func); +#if defined(CONFIG_THUMB2_KERNEL) && !defined(MODULE) + if (ret == -EINVAL) { + pr_err("FAIL: Known longtime bug with jprobe on Thumb kernels\n"); + tests_failed = ret; + ret = 0; + } +#endif if (ret < 0) return ret; @@ -1671,6 +1679,8 @@ static int __init run_all_tests(void) #endif out: + if (ret == 0) + ret = tests_failed; if (ret == 0) pr_info("Finished kprobe tests OK\n"); else -- cgit v1.2.3-70-g09d2 From 272226007f436eff953c4398c1f5509cb74889ac Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Mon, 3 Mar 2014 15:08:30 +0000 Subject: ARM: kprobes: Disallow instructions with PC and register specified shift ARM data processing instructions which have a register specified shift are defined as UNPREDICTABLE if PC is used for any register, not just the shift value as the code was previous assuming. This issue manifests on A15 devices as either test case failures or undefined instructions aborts. Reported-by: David Long Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test-arm.c | 22 ++++++++++++---------- arch/arm/kernel/probes-arm.c | 6 +++--- 2 files changed, 15 insertions(+), 13 deletions(-) diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 9db4b659d03..e73f9cff922 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -74,8 +74,6 @@ void kprobe_arm_test_cases(void) TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\ TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\ TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\ - TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\ - TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\ TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \ TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \ TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \ @@ -103,8 +101,6 @@ void kprobe_arm_test_cases(void) TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \ TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \ TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \ - TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \ - TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \ TEST_R( op "eq r",11,VAL1,", #0xf5") \ TEST_R( op "ne r",0, VAL1,", #0xf5000000") \ TEST_R( op " r",8, VAL2,", #0x000af000") @@ -125,7 +121,6 @@ void kprobe_arm_test_cases(void) TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \ TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \ TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \ - TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \ TEST( op "eq" s " r0, #0xf5") \ TEST( op "ne" s " r11, #0xf5000000") \ TEST( op s " r7, #0x000af000") \ @@ -159,12 +154,19 @@ void kprobe_arm_test_cases(void) TEST_SUPPORTED("cmp pc, #0x1000"); TEST_SUPPORTED("cmp sp, #0x1000"); - /* Data-processing with PC as shift*/ + /* Data-processing with PC and a shift count in a register */ TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) " @ cmp r12, r14, asl pc") TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) " @ mov r12, r14, asl pc") TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) " @ add r10, r12, r14, asl pc") - - /* Data-processing with PC as shift*/ + TEST_UNSUPPORTED(__inst_arm(0xe151021f) " @ cmp r1, pc, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe17f0211) " @ cmn pc, r1, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe1a0121f) " @ mov r1, pc, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe1a0f211) " @ mov pc, r1, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe042131f) " @ sub r1, r2, pc, lsl r3") + TEST_UNSUPPORTED(__inst_arm(0xe1cf1312) " @ bic r1, pc, r2, lsl r3") + TEST_UNSUPPORTED(__inst_arm(0xe081f312) " @ add pc, r1, r2, lsl r3") + + /* Data-processing with PC as a target and status registers updated */ TEST_UNSUPPORTED("movs pc, r1") TEST_UNSUPPORTED("movs pc, r1, lsl r2") TEST_UNSUPPORTED("movs pc, #0x10000") @@ -187,14 +189,14 @@ void kprobe_arm_test_cases(void) TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"") TEST_BF_R ("add pc, r",14,2f-1f-8,", pc") TEST_BF_R ("mov pc, r",0,2f,"") - TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") + TEST_BF_R ("add pc, pc, r",14,(2f-1f-8)*2,", asr #1") TEST_BB( "sub pc, pc, #1b-2b+8") #if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7) TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */ #endif TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") - TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"") + TEST_R( "add pc, pc, r",10,-2,", asl #1") #ifdef CONFIG_THUMB2_KERNEL TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"") TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8") diff --git a/arch/arm/kernel/probes-arm.c b/arch/arm/kernel/probes-arm.c index 51a13a02798..8eaef81d834 100644 --- a/arch/arm/kernel/probes-arm.c +++ b/arch/arm/kernel/probes-arm.c @@ -341,12 +341,12 @@ static const union decode_item arm_cccc_000x_table[] = { /* CMP (reg-shift reg) cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */ /* CMN (reg-shift reg) cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0f900090, 0x01100010, PROBES_DATA_PROCESSING_REG, - REGS(ANY, 0, NOPC, 0, ANY)), + REGS(NOPC, 0, NOPC, 0, NOPC)), /* MOV (reg-shift reg) cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */ /* MVN (reg-shift reg) cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0fa00090, 0x01a00010, PROBES_DATA_PROCESSING_REG, - REGS(0, ANY, NOPC, 0, ANY)), + REGS(0, NOPC, NOPC, 0, NOPC)), /* AND (reg-shift reg) cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */ /* EOR (reg-shift reg) cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */ @@ -359,7 +359,7 @@ static const union decode_item arm_cccc_000x_table[] = { /* ORR (reg-shift reg) cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */ /* BIC (reg-shift reg) cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG, - REGS(ANY, ANY, NOPC, 0, ANY)), + REGS(NOPC, NOPC, NOPC, 0, NOPC)), DECODE_END }; -- cgit v1.2.3-70-g09d2 From 449fd15fbcde239875031d70fd06abb4a0e1ed09 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Tue, 11 Mar 2014 14:05:26 +0000 Subject: ARM: kprobes: Fix test code compilation errors for ARMv4 targets Conditionally compile kprobes test cases for ARMv5 instructions to avoid compilation errors with ARMv4 targets like: /tmp/cc7Tx8ST.s:16740: Error: selected processor does not support ARM mode `clz r0,r0' Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test-arm.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index e73f9cff922..cb1424240ff 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -218,6 +218,7 @@ void kprobe_arm_test_cases(void) TEST_BB_R("bx r",7,2f,"") TEST_BF_R("bxeq r",14,2f,"") +#if __LINUX_ARM_ARCH__ >= 5 TEST_R("clz r0, r",0, 0x0,"") TEST_R("clzeq r7, r",14,0x1,"") TEST_R("clz lr, r",7, 0xffffffff,"") @@ -339,6 +340,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2") TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2") TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc") +#endif TEST_GROUP("Multiply and multiply-accumulate") @@ -561,6 +563,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED("ldrsht r1, [r2], #48") #endif +#if __LINUX_ARM_ARCH__ >= 5 TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]") TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]") TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!") @@ -597,6 +600,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) " @ ldrd r12, [pc, #48]!") TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) " @ ldrd pc, [r9], #48") TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) " @ ldrd lr, [r9], #48") +#endif TEST_GROUP("Miscellaneous") @@ -1229,7 +1233,9 @@ void kprobe_arm_test_cases(void) TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0") COPROCESSOR_INSTRUCTIONS_ST_LD("",e) +#if __LINUX_ARM_ARCH__ >= 5 COPROCESSOR_INSTRUCTIONS_MC_MR("",e) +#endif TEST_UNSUPPORTED("svc 0") TEST_UNSUPPORTED("svc 0xffffff") @@ -1289,7 +1295,9 @@ void kprobe_arm_test_cases(void) TEST( "blx __dummy_thumb_subroutine_odd") #endif /* __LINUX_ARM_ARCH__ >= 6 */ +#if __LINUX_ARM_ARCH__ >= 5 COPROCESSOR_INSTRUCTIONS_ST_LD("2",f) +#endif #if __LINUX_ARM_ARCH__ >= 6 COPROCESSOR_INSTRUCTIONS_MC_MR("2",f) #endif -- cgit v1.2.3-70-g09d2 From c556bcddc78096caeb46dbe3ad0314dd951f1665 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 25 Jun 2014 14:44:19 -0700 Subject: clk: qcom: HDMI source sel is 3 not 2 The HDMI PLL input to the tv mux is supposed to be 3, not 2. Fix the code so that we can properly select the HDMI PLL. Fixes: 6d00b56fe "clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)" Reported-by: Rob Clark Signed-off-by: Stephen Boyd Signed-off-by: Mike Turquette --- drivers/clk/qcom/mmcc-msm8960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c index 12f3c0b64fc..4c449b3170f 100644 --- a/drivers/clk/qcom/mmcc-msm8960.c +++ b/drivers/clk/qcom/mmcc-msm8960.c @@ -1209,7 +1209,7 @@ static struct clk_branch rot_clk = { static u8 mmcc_pxo_hdmi_map[] = { [P_PXO] = 0, - [P_HDMI_PLL] = 2, + [P_HDMI_PLL] = 3, }; static const char *mmcc_pxo_hdmi[] = { -- cgit v1.2.3-70-g09d2 From df86754b746e9a0ff6f863f690b1c01d408e3cdc Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 2 Jul 2014 07:44:44 +0800 Subject: hwmon: (amc6821) Fix permissions for temp2_input temp2_input should not be writable, fix it. Reported-by: Guenter Roeck Signed-off-by: Axel Lin Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/amc6821.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c index eea81729651..9f2be3dd28f 100644 --- a/drivers/hwmon/amc6821.c +++ b/drivers/hwmon/amc6821.c @@ -704,7 +704,7 @@ static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, get_temp_alarm, NULL, IDX_TEMP1_MAX); static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, get_temp_alarm, NULL, IDX_TEMP1_CRIT); -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR, +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, get_temp, NULL, IDX_TEMP2_INPUT); static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp, set_temp, IDX_TEMP2_MIN); -- cgit v1.2.3-70-g09d2 From 1035a9e3e9c76b64a860a774f5b867d28d34acc2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 2 Jul 2014 08:29:55 +0800 Subject: hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div Writing to fanX_div does not clear the cache. As a result, reading from fanX_div may return the old value for up to two seconds after writing a new value. This patch ensures the fan_div cache is updated in set_fan_div(). Reported-by: Guenter Roeck Signed-off-by: Axel Lin Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/adm1029.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c index 78339e880bd..2804571b269 100644 --- a/drivers/hwmon/adm1029.c +++ b/drivers/hwmon/adm1029.c @@ -232,6 +232,9 @@ static ssize_t set_fan_div(struct device *dev, /* Update the value */ reg = (reg & 0x3F) | (val << 6); + /* Update the cache */ + data->fan_div[attr->index] = reg; + /* Write value */ i2c_smbus_write_byte_data(client, ADM1029_REG_FAN_DIV[attr->index], reg); -- cgit v1.2.3-70-g09d2 From c024044d4da2c9c3b32933b4235df1e409293b84 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 3 Jul 2014 22:45:45 +0800 Subject: hwmon: (adm1021) Fix cache problem when writing temperature limits The module test script for the adm1021 driver exposes a cache problem when writing temperature limits. temp_min and temp_max are expected to be stored in milli-degrees C but are stored in degrees C. Reported-by: Guenter Roeck Signed-off-by: Axel Lin Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/adm1021.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 3eb4281689b..d74241bb278 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -185,7 +185,7 @@ static ssize_t set_temp_max(struct device *dev, struct adm1021_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; long temp; - int err; + int reg_val, err; err = kstrtol(buf, 10, &temp); if (err) @@ -193,10 +193,11 @@ static ssize_t set_temp_max(struct device *dev, temp /= 1000; mutex_lock(&data->update_lock); - data->temp_max[index] = clamp_val(temp, -128, 127); + reg_val = clamp_val(temp, -128, 127); + data->temp_max[index] = reg_val * 1000; if (!read_only) i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index), - data->temp_max[index]); + reg_val); mutex_unlock(&data->update_lock); return count; @@ -210,7 +211,7 @@ static ssize_t set_temp_min(struct device *dev, struct adm1021_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; long temp; - int err; + int reg_val, err; err = kstrtol(buf, 10, &temp); if (err) @@ -218,10 +219,11 @@ static ssize_t set_temp_min(struct device *dev, temp /= 1000; mutex_lock(&data->update_lock); - data->temp_min[index] = clamp_val(temp, -128, 127); + reg_val = clamp_val(temp, -128, 127); + data->temp_min[index] = reg_val * 1000; if (!read_only) i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index), - data->temp_min[index]); + reg_val); mutex_unlock(&data->update_lock); return count; -- cgit v1.2.3-70-g09d2 From dd94324b983afe114ba9e7ee3649313b451f63ce Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 27 May 2014 14:25:43 +0530 Subject: ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock rates Without the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 532000000 With the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 266000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 133000000 The l3 clock derived from core DPLL is actually a divider clock, with the default divider set to 2. l4 then derived from l3 is a fixed factor clock, but the fixed divider is 2 and not 1. Which means the l3 clock is half of core DPLLs h12x2 and l4 is half of l3 (as seen with this patch) Signed-off-by: Rajendra Nayak Signed-off-by: Tero Kristo --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index b03cfe49d22..d126d576342 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -673,10 +673,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x0100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; l4_root_clk_div: l4_root_clk_div { @@ -684,7 +686,7 @@ compatible = "fixed-factor-clock"; clocks = <&l3_iclk_div>; clock-mult = <1>; - clock-div = <1>; + clock-div = <2>; }; video1_clk2_div: video1_clk2_div { -- cgit v1.2.3-70-g09d2 From 066b7ed9558087a7957a1128f27d7a3462ff117f Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Fri, 4 Jul 2014 14:29:30 +0200 Subject: kbuild: Do not print the build directory with make -s Commit c2e28dc9 (kbuild: Print the name of the build directory) prints the name of the build directory for O= builds, but we should not be doing this in make -s mode, so that commands like make -s O= kernelrelease can be used by scripts. This matches the behavior of make itself, where the -s option implies --no-print-directory. Signed-off-by: Michal Marek --- Makefile | 97 +++++++++++++++++++++++++++++++++------------------------------- 1 file changed, 50 insertions(+), 47 deletions(-) diff --git a/Makefile b/Makefile index 40544a0babd..1a5f9f3c7a5 100644 --- a/Makefile +++ b/Makefile @@ -41,6 +41,29 @@ unexport GREP_OPTIONS # descending is started. They are now explicitly listed as the # prepare rule. +# Beautify output +# --------------------------------------------------------------------------- +# +# Normally, we echo the whole command before executing it. By making +# that echo $($(quiet)$(cmd)), we now have the possibility to set +# $(quiet) to choose other forms of output instead, e.g. +# +# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ +# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< +# +# If $(quiet) is empty, the whole command will be printed. +# If it is set to "quiet_", only the short version will be printed. +# If it is set to "silent_", nothing will be printed at all, since +# the variable $(silent_cmd_cc_o_c) doesn't exist. +# +# A simple variant is to prefix commands with $(Q) - that's useful +# for commands that shall be hidden in non-verbose mode. +# +# $(Q)ln $@ :< +# +# If KBUILD_VERBOSE equals 0 then the above command will be hidden. +# If KBUILD_VERBOSE equals 1 then the above command is displayed. +# # To put more focus on warnings, be less verbose as default # Use 'make V=1' to see the full commands @@ -51,6 +74,29 @@ ifndef KBUILD_VERBOSE KBUILD_VERBOSE = 0 endif +ifeq ($(KBUILD_VERBOSE),1) + quiet = + Q = +else + quiet=quiet_ + Q = @ +endif + +# If the user is running make -s (silent mode), suppress echoing of +# commands + +ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 +ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) + quiet=silent_ +endif +else # make-3.8x +ifneq ($(filter s% -s%,$(MAKEFLAGS)),) + quiet=silent_ +endif +endif + +export quiet Q KBUILD_VERBOSE + # Call a source code checker (by default, "sparse") as part of the # C compilation. # @@ -128,8 +174,11 @@ $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make # Fake the "Entering directory" message once, so that IDEs/editors are # able to understand relative filenames. + echodir := @echo + quiet_echodir := @echo +silent_echodir := @: sub-make: FORCE - @echo "make[1]: Entering directory \`$(KBUILD_OUTPUT)'" + $($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'" $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ KBUILD_SRC=$(CURDIR) \ KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \ @@ -292,52 +341,6 @@ endif export KBUILD_MODULES KBUILD_BUILTIN export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD -# Beautify output -# --------------------------------------------------------------------------- -# -# Normally, we echo the whole command before executing it. By making -# that echo $($(quiet)$(cmd)), we now have the possibility to set -# $(quiet) to choose other forms of output instead, e.g. -# -# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ -# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< -# -# If $(quiet) is empty, the whole command will be printed. -# If it is set to "quiet_", only the short version will be printed. -# If it is set to "silent_", nothing will be printed at all, since -# the variable $(silent_cmd_cc_o_c) doesn't exist. -# -# A simple variant is to prefix commands with $(Q) - that's useful -# for commands that shall be hidden in non-verbose mode. -# -# $(Q)ln $@ :< -# -# If KBUILD_VERBOSE equals 0 then the above command will be hidden. -# If KBUILD_VERBOSE equals 1 then the above command is displayed. - -ifeq ($(KBUILD_VERBOSE),1) - quiet = - Q = -else - quiet=quiet_ - Q = @ -endif - -# If the user is running make -s (silent mode), suppress echoing of -# commands - -ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 -ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) - quiet=silent_ -endif -else # make-3.8x -ifneq ($(filter s% -s%,$(MAKEFLAGS)),) - quiet=silent_ -endif -endif - -export quiet Q KBUILD_VERBOSE - ifneq ($(CC),) ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1) COMPILER := clang -- cgit v1.2.3-70-g09d2 From c79624c1a698a82747b1e6fe54cc7effa4c07aa5 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Fri, 4 Jul 2014 22:53:52 +0200 Subject: kbuild: Fix packaging targets with relative $(srctree) All other users of Makefile.build set $(obj) to the name of the subdirectory to build. Do the same for the packaging targets, otherwise the build fails if $(srctree) is a relative directory: $ make O=build tar-pkg make[1]: Entering directory `/home/mmarek/linux-2.6/build' CHK include/config/kernel.release ../scripts/Makefile.build:44: ../../scripts/package/Makefile: No such file or directory make[2]: *** No rule to make target `../../scripts/package/Makefile'. Stop. Fixes: 9da0763b ("kbuild: Use relative path when building in a subdir of the source tree") Signed-off-by: Michal Marek --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 1a5f9f3c7a5..347d6c7c731 100644 --- a/Makefile +++ b/Makefile @@ -1176,7 +1176,7 @@ distclean: mrproper # Packaging of the kernel to various formats # --------------------------------------------------------------------------- # rpm target kept for backward compatibility -package-dir := $(srctree)/scripts/package +package-dir := scripts/package %src-pkg: FORCE $(Q)$(MAKE) $(build)=$(package-dir) $@ -- cgit v1.2.3-70-g09d2 From 73ea6ec66a9f6b81335e55ca642f25172c283b20 Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Sat, 5 Jul 2014 06:09:18 +0900 Subject: ARM: EXYNOS: Fix the check for non-smp configuration Commit 1754c42e3db5("ARM: exynos: move sysram info to exynos.c") missed out the CONFIG_ prefix causing exynos_sysram_init() to get called twice for SMP configurations. Signed-off-by: Abhilash Kesavan Reviewed-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f38cf7c110c..95cad252eb1 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -297,7 +297,7 @@ static void __init exynos_dt_machine_init(void) * This is called from smp_prepare_cpus if we've built for SMP, but * we still need to set it up for PM and firmware ops if not. */ - if (!IS_ENABLED(SMP)) + if (!IS_ENABLED(CONFIG_SMP)) exynos_sysram_init(); exynos_cpuidle_init(); -- cgit v1.2.3-70-g09d2 From 2fd82d33011479e4ee3b1df8ddaa561201fe145d Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Sat, 5 Jul 2014 06:31:31 +0900 Subject: ARM: dts: fix pwm-cells in pwm node for exynos4 pwm-cells should be 3. Third cell is optional PWM flags. And This flag supported by this binding is PWM_POLARITY_INVERTED. Signed-off-by: Jaewon Kim Reviewed-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index fbaf426d2da..17b22e9cc2a 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -554,7 +554,7 @@ interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; clocks = <&clock CLK_PWM>; clock-names = "timers"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; -- cgit v1.2.3-70-g09d2 From 89e6a13b88c8bf7ce1011a8a69113f22889f4585 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Sat, 5 Jul 2014 06:38:55 +0900 Subject: clocksource: exynos_mct: Fix ftrace In (93bfb76 clocksource: exynos_mct: register sched_clock callback) we supported using the MCT as a scheduler clock. We properly marked exynos4_read_sched_clock() as notrace. However, we then went and called another function that _wasn't_ notrace. That means if you do: cd /sys/kernel/debug/tracing/ echo function_graph > current_tracer You'll get a crash. Fix this (but still let other readers of the MCT be trace-enabled) by adding an extra function. It's important to keep other users of MCT traceable because the MCT is actually quite slow to access and we want exynos4_frc_read() to show up in ftrace profiles if it's the bottleneck. Signed-off-by: Doug Anderson Signed-off-by: Kukjin Kim --- drivers/clocksource/exynos_mct.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index f71d55f5e6e..5ce99c07ce8 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -162,7 +162,7 @@ static void exynos4_mct_frc_start(void) exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON); } -static cycle_t exynos4_frc_read(struct clocksource *cs) +static cycle_t notrace _exynos4_frc_read(void) { unsigned int lo, hi; u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U); @@ -176,6 +176,11 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static cycle_t exynos4_frc_read(struct clocksource *cs) +{ + return _exynos4_frc_read(); +} + static void exynos4_frc_resume(struct clocksource *cs) { exynos4_mct_frc_start(); @@ -192,7 +197,7 @@ struct clocksource mct_frc = { static u64 notrace exynos4_read_sched_clock(void) { - return exynos4_frc_read(&mct_frc); + return _exynos4_frc_read(); } static void __init exynos4_clocksource_init(void) -- cgit v1.2.3-70-g09d2 From 8bf13a4346996b5a53d5f0c64b0914693c818fc2 Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Sat, 5 Jul 2014 06:40:23 +0900 Subject: clocksource: exynos_mct: Register the timer for stable udelay This patch registers the exynos mct clocksource as the current timer as it has constant clock rate. This will generate correct udelay for the exynos platform and avoid using unnecessary calibrated jiffies. This change has been tested on exynos5420 based board and udelay is very close to expected. Without this patch udelay() on exynos5400 / exynos5800 is wildly inaccurate due to big.LITTLE not adjusting loops_per_jiffy correctly. Also without this patch udelay() on exynos5250 can be innacruate during transitions between frequencies < 800 MHz (you'll go 200 MHz -> 800 MHz -> 300 MHz and will run at 800 MHz for a time with the wrong loops_per_jiffy). [dianders: reworked and created version 3] Signed-off-by: Amit Daniel Kachhap Signed-off-by: Doug Anderson Signed-off-by: Kukjin Kim --- drivers/clocksource/exynos_mct.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 5ce99c07ce8..ab51bf20a3e 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -200,10 +200,21 @@ static u64 notrace exynos4_read_sched_clock(void) return _exynos4_frc_read(); } +static struct delay_timer exynos4_delay_timer; + +static cycles_t exynos4_read_current_timer(void) +{ + return _exynos4_frc_read(); +} + static void __init exynos4_clocksource_init(void) { exynos4_mct_frc_start(); + exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer; + exynos4_delay_timer.freq = clk_rate; + register_current_timer_delay(&exynos4_delay_timer); + if (clocksource_register_hz(&mct_frc, clk_rate)) panic("%s: can't register clocksource\n", mct_frc.name); -- cgit v1.2.3-70-g09d2 From 1419d8151be990f115c38deac497ad84d26434dd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 11 Jun 2014 11:15:13 +0300 Subject: pinctrl: berlin: fix an error code in berlin_pinctrl_probe() We are returning success here because PTR_ERR(NULL) is zero. We should be returning -ENODEV. Fixes: 3de68d331c24 ('pinctrl: berlin: add the core pinctrl driver for Marvell Berlin SoCs') Signed-off-by: Dan Carpenter Acked-by: Sebastian Hesselbarth Signed-off-by: Linus Walleij --- drivers/pinctrl/berlin/berlin.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/berlin/berlin.c b/drivers/pinctrl/berlin/berlin.c index edf5d2fd2b2..86db2235ab0 100644 --- a/drivers/pinctrl/berlin/berlin.c +++ b/drivers/pinctrl/berlin/berlin.c @@ -320,7 +320,7 @@ int berlin_pinctrl_probe(struct platform_device *pdev, regmap = dev_get_regmap(&pdev->dev, NULL); if (!regmap) - return PTR_ERR(regmap); + return -ENODEV; pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL); if (!pctrl) -- cgit v1.2.3-70-g09d2 From 6c3d8d4f05ec477f68615dc6120c46fec64a2268 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-press: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Agreed with by Srinivas. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/hid-sensor-press.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c index 1cd190c7378..2c0d2a4fed8 100644 --- a/drivers/iio/pressure/hid-sensor-press.c +++ b/drivers/iio/pressure/hid-sensor-press.c @@ -78,7 +78,6 @@ static int press_read_raw(struct iio_dev *indio_dev, struct press_state *press_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -128,14 +127,12 @@ static int press_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &press_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &press_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3-70-g09d2 From 2f084c17562a3a20ee0cc11d3863ca5e8fd4e10b Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-accel-3d: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/accel/hid-sensor-accel-3d.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c index 69abf9163df..54e464e4bb7 100644 --- a/drivers/iio/accel/hid-sensor-accel-3d.c +++ b/drivers/iio/accel/hid-sensor-accel-3d.c @@ -110,7 +110,6 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev, struct accel_3d_state *accel_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -151,14 +150,12 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &accel_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &accel_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3-70-g09d2 From 5f25b41f7ec242fce43d0f745369c0ba9d25cb72 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-magn-3d: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/hid-sensor-magn-3d.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c index 41cf29e2a37..b2b0937d513 100644 --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c @@ -110,7 +110,6 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev, struct magn_3d_state *magn_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -153,14 +152,12 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &magn_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &magn_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3-70-g09d2 From 5d24b0b37bd5229227d0271c58b15aeb52e9c966 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-als: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-als.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index f34c94380b4..96e71e103ea 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -79,7 +79,6 @@ static int als_read_raw(struct iio_dev *indio_dev, struct als_state *als_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -129,14 +128,12 @@ static int als_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &als_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &als_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3-70-g09d2 From 27793803f2ea876799cc44e05bb28d34b34a3869 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-gyro-3d: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/gyro/hid-sensor-gyro-3d.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c index 40f4e4935d0..fa034a3dad7 100644 --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c @@ -110,7 +110,6 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev, struct gyro_3d_state *gyro_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -151,14 +150,12 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &gyro_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &gyro_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3-70-g09d2 From 4ff9f633c35e2d94eb92f92c48ae0d9172242889 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-prox: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-prox.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index d203ef4d892..412bae86d6a 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -74,7 +74,6 @@ static int prox_read_raw(struct iio_dev *indio_dev, struct prox_state *prox_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -125,14 +124,12 @@ static int prox_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &prox_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &prox_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3-70-g09d2 From 61c219f5814277ecb71d64cb30297028d6665979 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 5 Jul 2014 16:28:35 -0400 Subject: ext4: fix unjournalled bg descriptor while initializing inode bitmap The first time that we allocate from an uninitialized inode allocation bitmap, if the block allocation bitmap is also uninitalized, we need to get write access to the block group descriptor before we start modifying the block group descriptor flags and updating the free block count, etc. Otherwise, there is the potential of a bad journal checksum (if journal checksums are enabled), and of the file system becoming inconsistent if we crash at exactly the wrong time. Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/ialloc.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index a87455df38b..0840bf321cd 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -874,6 +874,13 @@ got: goto out; } + BUFFER_TRACE(group_desc_bh, "get_write_access"); + err = ext4_journal_get_write_access(handle, group_desc_bh); + if (err) { + ext4_std_error(sb, err); + goto out; + } + /* We may have to initialize the block bitmap if it isn't already */ if (ext4_has_group_desc_csum(sb) && gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { @@ -910,13 +917,6 @@ got: } } - BUFFER_TRACE(group_desc_bh, "get_write_access"); - err = ext4_journal_get_write_access(handle, group_desc_bh); - if (err) { - ext4_std_error(sb, err); - goto out; - } - /* Update the relevant bg descriptor fields */ if (ext4_has_group_desc_csum(sb)) { int free; -- cgit v1.2.3-70-g09d2 From bf177a1eb6d106ba195de86734392d43dfbef702 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 5 Jul 2014 11:35:52 -0600 Subject: MAINTAINERS: Update mx6 PCI driver maintainer's email Use Shawn's email address from Freescale. Signed-off-by: Fabio Estevam Signed-off-by: Bjorn Helgaas Acked-by: Shawn Guo --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 134483f206e..f35d07d284b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6774,7 +6774,7 @@ F: arch/x86/kernel/quirks.c PCI DRIVER FOR IMX6 M: Richard Zhu -M: Shawn Guo +M: Shawn Guo L: linux-pci@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -- cgit v1.2.3-70-g09d2 From ae0f78de2c43b6fadd007c231a352b13b5be8ed2 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 5 Jul 2014 18:40:52 -0400 Subject: ext4: clarify error count warning messages Make it clear that values printed are times, and that it is error since last fsck. Also add note about fsck version required. Signed-off-by: Pavel Machek Signed-off-by: Theodore Ts'o Reviewed-by: Andreas Dilger Cc: stable@vger.kernel.org --- fs/ext4/super.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index b9b9aabfb4d..342394772b6 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2809,10 +2809,11 @@ static void print_daily_error_info(unsigned long arg) es = sbi->s_es; if (es->s_error_count) - ext4_msg(sb, KERN_NOTICE, "error count: %u", + /* fsck newer than v1.41.13 is needed to clean this condition. */ + ext4_msg(sb, KERN_NOTICE, "error count since last fsck: %u", le32_to_cpu(es->s_error_count)); if (es->s_first_error_time) { - printk(KERN_NOTICE "EXT4-fs (%s): initial error at %u: %.*s:%d", + printk(KERN_NOTICE "EXT4-fs (%s): initial error at time %u: %.*s:%d", sb->s_id, le32_to_cpu(es->s_first_error_time), (int) sizeof(es->s_first_error_func), es->s_first_error_func, @@ -2826,7 +2827,7 @@ static void print_daily_error_info(unsigned long arg) printk("\n"); } if (es->s_last_error_time) { - printk(KERN_NOTICE "EXT4-fs (%s): last error at %u: %.*s:%d", + printk(KERN_NOTICE "EXT4-fs (%s): last error at time %u: %.*s:%d", sb->s_id, le32_to_cpu(es->s_last_error_time), (int) sizeof(es->s_last_error_func), es->s_last_error_func, -- cgit v1.2.3-70-g09d2 From 94d4c066a4ff170a2671b1a9b153febbf36796f6 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 5 Jul 2014 19:15:50 -0400 Subject: ext4: clarify ext4_error message in ext4_mb_generate_buddy_error() We are spending a lot of time explaining to users what this error means. Let's try to improve the message to avoid this problem. Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/mballoc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 7f72f50a8fa..2dcb936be90 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -752,8 +752,8 @@ void ext4_mb_generate_buddy(struct super_block *sb, if (free != grp->bb_free) { ext4_grp_locked_error(sb, group, 0, 0, - "%u clusters in bitmap, %u in gd; " - "block bitmap corrupt.", + "block bitmap and bg descriptor " + "inconsistent: %u vs %u free clusters", free, grp->bb_free); /* * If we intend to continue, we consider group descriptor -- cgit v1.2.3-70-g09d2 From 5dd214248f94d430d70e9230bda72f2654ac88a8 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 5 Jul 2014 19:18:22 -0400 Subject: ext4: disable synchronous transaction batching if max_batch_time==0 The mount manpage says of the max_batch_time option, This optimization can be turned off entirely by setting max_batch_time to 0. But the code doesn't do that. So fix the code to do that. Signed-off-by: Eric Sandeen Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/super.c | 2 -- fs/jbd2/transaction.c | 5 ++++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 342394772b6..6297c07c937 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1525,8 +1525,6 @@ static int handle_mount_opt(struct super_block *sb, char *opt, int token, arg = JBD2_DEFAULT_MAX_COMMIT_AGE; sbi->s_commit_interval = HZ * arg; } else if (token == Opt_max_batch_time) { - if (arg == 0) - arg = EXT4_DEF_MAX_BATCH_TIME; sbi->s_max_batch_time = arg; } else if (token == Opt_min_batch_time) { sbi->s_min_batch_time = arg; diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index 38cfcf5f6fc..6f0f590cc5a 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -1588,9 +1588,12 @@ int jbd2_journal_stop(handle_t *handle) * to perform a synchronous write. We do this to detect the * case where a single process is doing a stream of sync * writes. No point in waiting for joiners in that case. + * + * Setting max_batch_time to 0 disables this completely. */ pid = current->pid; - if (handle->h_sync && journal->j_last_sync_writer != pid) { + if (handle->h_sync && journal->j_last_sync_writer != pid && + journal->j_max_batch_time) { u64 commit_time, trans_time; journal->j_last_sync_writer = pid; -- cgit v1.2.3-70-g09d2 From 0cd8d4052ae4c690fc3ea6133a0ad5404360308d Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Sun, 6 Jul 2014 15:51:23 -0600 Subject: ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver The commit 7be914f {ARM: OMAP3: PRM/CM: Cleanup unused header} removed some of the macros used by the TI DSP/Bridge driver. This fixes the following build errors when trying to build DSP/Bridge driver (disabled at present), otherwise results in the following build errors: drivers/staging/tidspbridge/core/tiomap3430.c:531:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430.c:531:31: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430.o] Error 1 make[3]: *** Waiting for unfinished jobs.... drivers/staging/tidspbridge/core/tiomap_io.c: In function 'sm_interrupt_dsp': drivers/staging/tidspbridge/core/tiomap_io.c:404:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:404:31: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap_io.c:414:12: error: 'OMAP3430_IVA2_DPLL_FREQSEL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:415:12: error: 'OMAP3430_EN_IVA2_DPLL_SHIFT' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap_io.o] Error 1 drivers/staging/tidspbridge/core/tiomap3430_pwr.c: In function 'dsp_clk_wakeup_event_ctrl': drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: error: 'OMAP3430_GRPSEL_GPT5_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap3430_pwr.c:455:19: error: 'OMAP3430_GRPSEL_GPT6_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:468:19: error: 'OMAP3430_GRPSEL_GPT7_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:481:19: error: 'OMAP3430_GRPSEL_GPT8_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:494:19: error: 'OMAP3430_GRPSEL_MCBSP1_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:546:19: error: 'OMAP3430_GRPSEL_MCBSP5_MASK' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430_pwr.o] Error 1 make[2]: *** [drivers/staging/tidspbridge] Error 2 Fixes: 7be914f (ARM: OMAP3: PRM/CM: Cleanup unused header) Cc: Rajendra Nayak Cc: Paul Walmsley Signed-off-by: Suman Anna Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cm-regbits-34xx.h | 3 +++ arch/arm/mach-omap2/prm-regbits-34xx.h | 6 ++++++ 2 files changed, 9 insertions(+) diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 04dab2fcf86..ee6c784cd6b 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -26,11 +26,14 @@ #define OMAP3430_EN_WDT3_SHIFT 12 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0) #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0 +#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4 #define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4) #define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3 +#define OMAP3430_EN_IVA2_DPLL_SHIFT 0 #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_CLK_MASK (1 << 0) +#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0 #define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_IVA2_CLK_SRC_SHIFT 19 #define OMAP3430_IVA2_CLK_SRC_WIDTH 3 diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 106132db532..cbefbd7cfdb 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -35,6 +35,8 @@ #define OMAP3430_LOGICSTATEST_MASK (1 << 2) #define OMAP3430_LASTLOGICSTATEENTERED_MASK (1 << 2) #define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0) +#define OMAP3430_GRPSEL_MCBSP5_MASK (1 << 10) +#define OMAP3430_GRPSEL_MCBSP1_MASK (1 << 9) #define OMAP3630_GRPSEL_UART4_MASK (1 << 18) #define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17) #define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16) @@ -42,6 +44,10 @@ #define OMAP3430_GRPSEL_GPIO3_MASK (1 << 14) #define OMAP3430_GRPSEL_GPIO2_MASK (1 << 13) #define OMAP3430_GRPSEL_UART3_MASK (1 << 11) +#define OMAP3430_GRPSEL_GPT8_MASK (1 << 9) +#define OMAP3430_GRPSEL_GPT7_MASK (1 << 8) +#define OMAP3430_GRPSEL_GPT6_MASK (1 << 7) +#define OMAP3430_GRPSEL_GPT5_MASK (1 << 6) #define OMAP3430_GRPSEL_MCBSP4_MASK (1 << 2) #define OMAP3430_GRPSEL_MCBSP3_MASK (1 << 1) #define OMAP3430_GRPSEL_MCBSP2_MASK (1 << 0) -- cgit v1.2.3-70-g09d2 From 1ea0999e085acb5dacaff163c3941b1d91d59c89 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Sun, 6 Jul 2014 15:51:24 -0600 Subject: ARM: DRA7: hwmod: Fixup SATA hwmod Get rid of optional clock as that is now managed by the AHCI platform driver. Correct .mpu_rt_idx to 1 as the module register space (SYSCONFIG..) is passed as the second memory resource in the device tree. Signed-off-by: Roger Quadros Reviewed-by: Rajendra Nayak Tested-by: Sekhar Nori Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 20b4398cec0..1209266a96b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1268,9 +1268,6 @@ static struct omap_hwmod_class dra7xx_sata_hwmod_class = { }; /* sata */ -static struct omap_hwmod_opt_clk sata_opt_clks[] = { - { .role = "ref_clk", .clk = "sata_ref_clk" }, -}; static struct omap_hwmod dra7xx_sata_hwmod = { .name = "sata", @@ -1278,6 +1275,7 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .clkdm_name = "l3init_clkdm", .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, .main_clk = "func_48m_fclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, @@ -1285,8 +1283,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .opt_clks = sata_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(sata_opt_clks), }; /* -- cgit v1.2.3-70-g09d2 From d904b38df0db137dc5f562010231f76c443cbe28 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Sun, 6 Jul 2014 15:51:24 -0600 Subject: ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss Add the sysconfig class bits for the Super Speed USB controllers Signed-off-by: Roger Quadros Reviewed-by: Rajendra Nayak Tested-by: Sekhar Nori Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 1209266a96b..284324f2b98 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1727,8 +1727,20 @@ static struct omap_hwmod dra7xx_uart6_hwmod = { * */ +static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = { .name = "usb_otg_ss", + .sysc = &dra7xx_usb_otg_ss_sysc, }; /* usb_otg_ss1 */ -- cgit v1.2.3-70-g09d2 From 6340c8720ce34f35b41a2e15d69fe3d755cb2104 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 2 Jul 2014 11:47:35 +0300 Subject: ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow The divider value provided to the _dpll_test_fint can reach value of 256 with J type DPLLs (USB etc.), which causes an overflow with the u8 datatype. Fix this by changing the parameter to be an int instead. Signed-off-by: Tero Kristo [paul@pwsan.com: changed type of 'n' to unsigned int] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clkt_dpll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 332af927f4d..67fd26a1844 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -76,7 +76,7 @@ * (assuming that it is counting N upwards), or -2 if the enclosing loop * should skip to the next iteration (again assuming N is increasing). */ -static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n) +static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n) { struct dpll_data *dd; long fint, fint_min, fint_max; -- cgit v1.2.3-70-g09d2 From e63f6e28dda6de3de2392ddca321e211fd860925 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Mon, 7 Jul 2014 01:13:46 +0200 Subject: Revert "ACPI / AC: Remove AC's proc directory." Revert commit ab0fd674d6ce (ACPI / AC: Remove AC's proc directory.), because some old tools (e.g. kpowersave from kde 3.5.10) are still using /proc/acpi/ac_adapter. Fixes: ab0fd674d6ce (ACPI / AC: Remove AC's proc directory.) Reported-and-tested-by: Sorin Manolache Signed-off-by: Lan Tianyu Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ac.c | 130 +++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 128 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index c67f6f5ad61..36b0e61f9c0 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -30,6 +30,10 @@ #include #include #include +#ifdef CONFIG_ACPI_PROCFS_POWER +#include +#include +#endif #include #include #include @@ -52,6 +56,7 @@ MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI AC Adapter Driver"); MODULE_LICENSE("GPL"); + static int acpi_ac_add(struct acpi_device *device); static int acpi_ac_remove(struct acpi_device *device); static void acpi_ac_notify(struct acpi_device *device, u32 event); @@ -67,6 +72,13 @@ static int acpi_ac_resume(struct device *dev); #endif static SIMPLE_DEV_PM_OPS(acpi_ac_pm, NULL, acpi_ac_resume); +#ifdef CONFIG_ACPI_PROCFS_POWER +extern struct proc_dir_entry *acpi_lock_ac_dir(void); +extern void *acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir); +static int acpi_ac_open_fs(struct inode *inode, struct file *file); +#endif + + static int ac_sleep_before_get_state_ms; static struct acpi_driver acpi_ac_driver = { @@ -91,6 +103,16 @@ struct acpi_ac { #define to_acpi_ac(x) container_of(x, struct acpi_ac, charger) +#ifdef CONFIG_ACPI_PROCFS_POWER +static const struct file_operations acpi_ac_fops = { + .owner = THIS_MODULE, + .open = acpi_ac_open_fs, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + /* -------------------------------------------------------------------------- AC Adapter Management -------------------------------------------------------------------------- */ @@ -143,6 +165,83 @@ static enum power_supply_property ac_props[] = { POWER_SUPPLY_PROP_ONLINE, }; +#ifdef CONFIG_ACPI_PROCFS_POWER +/* -------------------------------------------------------------------------- + FS Interface (/proc) + -------------------------------------------------------------------------- */ + +static struct proc_dir_entry *acpi_ac_dir; + +static int acpi_ac_seq_show(struct seq_file *seq, void *offset) +{ + struct acpi_ac *ac = seq->private; + + + if (!ac) + return 0; + + if (acpi_ac_get_state(ac)) { + seq_puts(seq, "ERROR: Unable to read AC Adapter state\n"); + return 0; + } + + seq_puts(seq, "state: "); + switch (ac->state) { + case ACPI_AC_STATUS_OFFLINE: + seq_puts(seq, "off-line\n"); + break; + case ACPI_AC_STATUS_ONLINE: + seq_puts(seq, "on-line\n"); + break; + default: + seq_puts(seq, "unknown\n"); + break; + } + + return 0; +} + +static int acpi_ac_open_fs(struct inode *inode, struct file *file) +{ + return single_open(file, acpi_ac_seq_show, PDE_DATA(inode)); +} + +static int acpi_ac_add_fs(struct acpi_ac *ac) +{ + struct proc_dir_entry *entry = NULL; + + printk(KERN_WARNING PREFIX "Deprecated procfs I/F for AC is loaded," + " please retry with CONFIG_ACPI_PROCFS_POWER cleared\n"); + if (!acpi_device_dir(ac->device)) { + acpi_device_dir(ac->device) = + proc_mkdir(acpi_device_bid(ac->device), acpi_ac_dir); + if (!acpi_device_dir(ac->device)) + return -ENODEV; + } + + /* 'state' [R] */ + entry = proc_create_data(ACPI_AC_FILE_STATE, + S_IRUGO, acpi_device_dir(ac->device), + &acpi_ac_fops, ac); + if (!entry) + return -ENODEV; + return 0; +} + +static int acpi_ac_remove_fs(struct acpi_ac *ac) +{ + + if (acpi_device_dir(ac->device)) { + remove_proc_entry(ACPI_AC_FILE_STATE, + acpi_device_dir(ac->device)); + remove_proc_entry(acpi_device_bid(ac->device), acpi_ac_dir); + acpi_device_dir(ac->device) = NULL; + } + + return 0; +} +#endif + /* -------------------------------------------------------------------------- Driver Model -------------------------------------------------------------------------- */ @@ -243,6 +342,11 @@ static int acpi_ac_add(struct acpi_device *device) goto end; ac->charger.name = acpi_device_bid(device); +#ifdef CONFIG_ACPI_PROCFS_POWER + result = acpi_ac_add_fs(ac); + if (result) + goto end; +#endif ac->charger.type = POWER_SUPPLY_TYPE_MAINS; ac->charger.properties = ac_props; ac->charger.num_properties = ARRAY_SIZE(ac_props); @@ -258,8 +362,12 @@ static int acpi_ac_add(struct acpi_device *device) ac->battery_nb.notifier_call = acpi_ac_battery_notify; register_acpi_notifier(&ac->battery_nb); end: - if (result) + if (result) { +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_ac_remove_fs(ac); +#endif kfree(ac); + } dmi_check_system(ac_dmi_table); return result; @@ -303,6 +411,10 @@ static int acpi_ac_remove(struct acpi_device *device) power_supply_unregister(&ac->charger); unregister_acpi_notifier(&ac->battery_nb); +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_ac_remove_fs(ac); +#endif + kfree(ac); return 0; @@ -315,9 +427,20 @@ static int __init acpi_ac_init(void) if (acpi_disabled) return -ENODEV; +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_ac_dir = acpi_lock_ac_dir(); + if (!acpi_ac_dir) + return -ENODEV; +#endif + + result = acpi_bus_register_driver(&acpi_ac_driver); - if (result < 0) + if (result < 0) { +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_unlock_ac_dir(acpi_ac_dir); +#endif return -ENODEV; + } return 0; } @@ -325,6 +448,9 @@ static int __init acpi_ac_init(void) static void __exit acpi_ac_exit(void) { acpi_bus_unregister_driver(&acpi_ac_driver); +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_unlock_ac_dir(acpi_ac_dir); +#endif } module_init(acpi_ac_init); module_exit(acpi_ac_exit); -- cgit v1.2.3-70-g09d2 From c16ed06024a6e699c332831dd50d8276744e3de8 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Fri, 20 Jun 2014 07:27:58 -0700 Subject: intel_pstate: Fix setting VID Commit 21855ff5 (intel_pstate: Set turbo VID for BayTrail) introduced setting the turbo VID which is required to prevent a machine check on some Baytrail SKUs under heavy graphics based workloads. The docmumentation update that brought the requirement to light also changed the bit mask used for enumerating P state and VID values from 0x7f to 0x3f. This change returns the mask value to 0x7f. Tested with the Intel NUC DN2820FYK, BIOS version FYBYT10H.86A.0034.2014.0513.1413 with v3.16-rc1 and v3.14.8 kernel versions. Fixes: 21855ff5 (intel_pstate: Set turbo VID for BayTrail) Link: https://bugzilla.kernel.org/show_bug.cgi?id=77951 Reported-and-tested-by: Rune Reterson Reported-and-tested-by: Eric Eickmeyer Cc: 3.13+ # 3.13+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 924bb2d42b1..74376d615ec 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -357,21 +357,21 @@ static int byt_get_min_pstate(void) { u64 value; rdmsrl(BYT_RATIOS, value); - return (value >> 8) & 0x3F; + return (value >> 8) & 0x7F; } static int byt_get_max_pstate(void) { u64 value; rdmsrl(BYT_RATIOS, value); - return (value >> 16) & 0x3F; + return (value >> 16) & 0x7F; } static int byt_get_turbo_pstate(void) { u64 value; rdmsrl(BYT_TURBO_RATIOS, value); - return value & 0x3F; + return value & 0x7F; } static void byt_set_pstate(struct cpudata *cpudata, int pstate) @@ -405,8 +405,8 @@ static void byt_get_vid(struct cpudata *cpudata) rdmsrl(BYT_VIDS, value); - cpudata->vid.min = int_tofp((value >> 8) & 0x3f); - cpudata->vid.max = int_tofp((value >> 16) & 0x3f); + cpudata->vid.min = int_tofp((value >> 8) & 0x7f); + cpudata->vid.max = int_tofp((value >> 16) & 0x7f); cpudata->vid.ratio = div_fp( cpudata->vid.max - cpudata->vid.min, int_tofp(cpudata->pstate.max_pstate - -- cgit v1.2.3-70-g09d2 From dd5fbf70f96dbfd7ee432096a1f979b2b3267856 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Fri, 20 Jun 2014 07:27:59 -0700 Subject: intel_pstate: don't touch turbo bit if turbo disabled or unavailable. If turbo is disabled in the BIOS bit 38 should be set in MSR_IA32_MISC_ENABLE register per section 14.3.2.1 of the SDM Vol 3 document 325384-050US Feb 2014. If this bit is set do *not* attempt to disable trubo via the MSR_IA32_PERF_CTL register. On some systems trying to disable turbo via MSR_IA32_PERF_CTL will cause subsequent writes to MSR_IA32_PERF_CTL not take affect, in fact reading MSR_IA32_PERF_CTL will not show the IDA/Turbo DISENGAGE bit(32) as set. A write of bit 32 to zero returns to normal operation. Also deal with the case where the processor does not support turbo and the BIOS does not report the fact in MSR_IA32_MISC_ENABLE but does report the max and turbo P states as the same value. Link: https://bugzilla.kernel.org/show_bug.cgi?id=64251 Cc: 3.13+ # 3.13+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 74376d615ec..127ead81461 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -128,6 +128,7 @@ static struct pstate_funcs pstate_funcs; struct perf_limits { int no_turbo; + int turbo_disabled; int max_perf_pct; int min_perf_pct; int32_t max_perf; @@ -287,7 +288,10 @@ static ssize_t store_no_turbo(struct kobject *a, struct attribute *b, if (ret != 1) return -EINVAL; limits.no_turbo = clamp_t(int, input, 0 , 1); - + if (limits.turbo_disabled) { + pr_warn("Turbo disabled by BIOS or unavailable on processor\n"); + limits.no_turbo = limits.turbo_disabled; + } return count; } @@ -381,7 +385,7 @@ static void byt_set_pstate(struct cpudata *cpudata, int pstate) u32 vid; val = pstate << 8; - if (limits.no_turbo) + if (limits.no_turbo && !limits.turbo_disabled) val |= (u64)1 << 32; vid_fp = cpudata->vid.min + mul_fp( @@ -448,7 +452,7 @@ static void core_set_pstate(struct cpudata *cpudata, int pstate) u64 val; val = pstate << 8; - if (limits.no_turbo) + if (limits.no_turbo && !limits.turbo_disabled) val |= (u64)1 << 32; wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val); @@ -741,7 +745,7 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) limits.min_perf = int_tofp(1); limits.max_perf_pct = 100; limits.max_perf = int_tofp(1); - limits.no_turbo = 0; + limits.no_turbo = limits.turbo_disabled; return 0; } limits.min_perf_pct = (policy->min * 100) / policy->cpuinfo.max_freq; @@ -784,6 +788,7 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy) { struct cpudata *cpu; int rc; + u64 misc_en; rc = intel_pstate_init_cpu(policy->cpu); if (rc) @@ -791,8 +796,13 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy) cpu = all_cpu_data[policy->cpu]; - if (!limits.no_turbo && - limits.min_perf_pct == 100 && limits.max_perf_pct == 100) + rdmsrl(MSR_IA32_MISC_ENABLE, misc_en); + if (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE || + cpu->pstate.max_pstate == cpu->pstate.turbo_pstate) { + limits.turbo_disabled = 1; + limits.no_turbo = 1; + } + if (limits.min_perf_pct == 100 && limits.max_perf_pct == 100) policy->policy = CPUFREQ_POLICY_PERFORMANCE; else policy->policy = CPUFREQ_POLICY_POWERSAVE; -- cgit v1.2.3-70-g09d2 From 41629a8233470325bfbb60377f555f9e8acc879f Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Fri, 20 Jun 2014 07:28:00 -0700 Subject: intel_pstate: Update documentation of {max,min}_perf_pct sysfs files Update documentation to make the interpretation of the values clearer Link: https://bugzilla.kernel.org/show_bug.cgi?id=64251 Cc: 3.13+ # 3.13+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- Documentation/cpu-freq/intel-pstate.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/cpu-freq/intel-pstate.txt b/Documentation/cpu-freq/intel-pstate.txt index e742d21dbd9..a69ffe1d54d 100644 --- a/Documentation/cpu-freq/intel-pstate.txt +++ b/Documentation/cpu-freq/intel-pstate.txt @@ -15,10 +15,13 @@ New sysfs files for controlling P state selection have been added to /sys/devices/system/cpu/intel_pstate/ max_perf_pct: limits the maximum P state that will be requested by - the driver stated as a percentage of the available performance. + the driver stated as a percentage of the available performance. The + available (P states) performance may be reduced by the no_turbo + setting described below. min_perf_pct: limits the minimum P state that will be requested by - the driver stated as a percentage of the available performance. + the driver stated as a percentage of the max (non-turbo) + performance level. no_turbo: limits the driver to selecting P states below the turbo frequency range. -- cgit v1.2.3-70-g09d2 From 179e8471673ce0249cd4ecda796008f7757e5bad Mon Sep 17 00:00:00 2001 From: Vincent Minet Date: Sat, 5 Jul 2014 01:51:33 +0200 Subject: intel_pstate: Set CPU number before accessing MSRs Ensure that cpu->cpu is set before writing MSR_IA32_PERF_CTL during CPU initialization. Otherwise only cpu0 has its P-state set and all other cores are left with their values unchanged. In most cases, this is not too serious because the P-states will be set correctly when the timer function is run. But when the default governor is set to performance, the per-CPU current_pstate stays the same forever and no attempts are made to write the MSRs again. Signed-off-by: Vincent Minet Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 127ead81461..86631cb6f7d 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -700,9 +700,8 @@ static int intel_pstate_init_cpu(unsigned int cpunum) cpu = all_cpu_data[cpunum]; - intel_pstate_get_cpu_pstates(cpu); - cpu->cpu = cpunum; + intel_pstate_get_cpu_pstates(cpu); init_timer_deferrable(&cpu->timer); cpu->timer.function = intel_pstate_timer_func; -- cgit v1.2.3-70-g09d2 From 2a58b4f88e3e51619916e9d090cbd1bb8d12b632 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Wed, 7 May 2014 13:38:00 +0100 Subject: iio:tcs3472: Check for buffer enabled and locking Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/iio/light/tcs3472.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/iio/light/tcs3472.c b/drivers/iio/light/tcs3472.c index fe063a0a21c..752569985d1 100644 --- a/drivers/iio/light/tcs3472.c +++ b/drivers/iio/light/tcs3472.c @@ -52,6 +52,7 @@ struct tcs3472_data { struct i2c_client *client; + struct mutex lock; u8 enable; u8 control; u8 atime; @@ -116,10 +117,17 @@ static int tcs3472_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: + if (iio_buffer_enabled(indio_dev)) + return -EBUSY; + + mutex_lock(&data->lock); ret = tcs3472_req_data(data); - if (ret < 0) + if (ret < 0) { + mutex_unlock(&data->lock); return ret; + } ret = i2c_smbus_read_word_data(data->client, chan->address); + mutex_unlock(&data->lock); if (ret < 0) return ret; *val = ret; @@ -255,6 +263,7 @@ static int tcs3472_probe(struct i2c_client *client, data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; + mutex_init(&data->lock); indio_dev->dev.parent = &client->dev; indio_dev->info = &tcs3472_info; -- cgit v1.2.3-70-g09d2 From b9326057a3d8447f5d2e74a7b521ccf21add2ec0 Mon Sep 17 00:00:00 2001 From: Andras Kovacs Date: Fri, 27 Jun 2014 14:50:11 +0200 Subject: USB: cp210x: add support for Corsair usb dongle Corsair USB Dongles are shipped with Corsair AXi series PSUs. These are cp210x serial usb devices, so make driver detect these. I have a program, that can get information from these PSUs. Tested with 2 different dongles shipped with Corsair AX860i and AX1200i units. Signed-off-by: Andras Kovacs Cc: Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 762e4a5f5ae..330df5ce435 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -153,6 +153,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ + { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */ -- cgit v1.2.3-70-g09d2 From 3d28bd840b2d3981cd28caf5fe1df38f1344dd60 Mon Sep 17 00:00:00 2001 From: Bernd Wachter Date: Wed, 2 Jul 2014 12:36:48 +0300 Subject: usb: option: Add ID for Telewell TW-LTE 4G v2 Add ID of the Telewell 4G v2 hardware to option driver to get legacy serial interface working Signed-off-by: Bernd Wachter Cc: Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ac73f49cd9f..a9688940543 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1487,6 +1487,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff), /* ZTE MF91 */ .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */ + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) }, -- cgit v1.2.3-70-g09d2 From 66b42b78bc1e816f92b662e8888c89195e4199e1 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:41:17 +0800 Subject: ACPI / EC: Avoid race condition related to advance_transaction() The advance_transaction() will be invoked from the IRQ context GPE handler and the task context ec_poll(). The handling of this function is locked so that the EC state machine are ensured to be advanced sequentially. But there is a problem. Before invoking advance_transaction(), EC_SC(R) is read. Then for advance_transaction(), there could be race condition around the lock from both contexts. The first one reading the register could fail this race and when it passes the stale register value to the state machine advancement code, the hardware condition is totally different from when the register is read. And the hardware accesses determined from the wrong hardware status can break the EC state machine. And there could be cases that the functionalities of the platform firmware are seriously affected. For example: 1. When 2 EC_DATA(W) writes compete the IBF=0, the 2nd EC_DATA(W) write may be invalid due to IBF=1 after the 1st EC_DATA(W) write. Then the hardware will either refuse to respond a next EC_SC(W) write of the next command or discard the current WR_EC command when it receives a EC_SC(W) write of the next command. 2. When 1 EC_SC(W) write and 1 EC_DATA(W) write compete the IBF=0, the EC_DATA(W) write may be invalid due to IBF=1 after the EC_SC(W) write. The next EC_DATA(R) could never be responded by the hardware. This is the root cause of the reported issue. Fix this issue by moving the EC_SC(R) access into the lock so that we can ensure that the state machine is advanced consistently. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams Reported-and-tested-by: Hans de Goede Reported-by: Barton Xu Tested-by: Steffen Weber Tested-by: Arthur Chen Signed-off-by: Lv Zheng Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ad11ba4a412..762b4cc9d7b 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -168,12 +168,15 @@ static void start_transaction(struct acpi_ec *ec) acpi_ec_write_cmd(ec, ec->curr->command); } -static void advance_transaction(struct acpi_ec *ec, u8 status) +static void advance_transaction(struct acpi_ec *ec) { unsigned long flags; struct transaction *t; + u8 status; spin_lock_irqsave(&ec->lock, flags); + pr_debug("===== %s =====\n", in_interrupt() ? "IRQ" : "TASK"); + status = acpi_ec_read_status(ec); t = ec->curr; if (!t) goto unlock; @@ -236,7 +239,7 @@ static int ec_poll(struct acpi_ec *ec) msecs_to_jiffies(1))) return 0; } - advance_transaction(ec, acpi_ec_read_status(ec)); + advance_transaction(ec); } while (time_before(jiffies, delay)); pr_debug("controller reset, restart transaction\n"); spin_lock_irqsave(&ec->lock, flags); @@ -635,11 +638,8 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, u32 gpe_number, void *data) { struct acpi_ec *ec = data; - u8 status = acpi_ec_read_status(ec); - - pr_debug("~~~> interrupt, status:0x%02x\n", status); - advance_transaction(ec, status); + advance_transaction(ec); if (ec_transaction_done(ec) && (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { wake_up(&ec->wait); -- cgit v1.2.3-70-g09d2 From f92fca0060fc4dc9227342d0072d75df98c1e5a5 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:41:35 +0800 Subject: ACPI / EC: Add asynchronous command byte write support Move the first command byte write into advance_transaction() so that all EC register accesses that can affect the command processing state machine can happen in this asynchronous state machine advancement function. The advance_transaction() function then can be a complete implementation of an asyncrhonous transaction for a single command so that: 1. The first command byte can be written in the interrupt context; 2. The command completion waiter can also be used to wait the first command byte's timeout; 3. In BURST mode, the follow-up command bytes can be written in the interrupt context directly, so that it doesn't need to return to the task context. Returning to the task context reduces the throughput of the BURST mode and in the worst cases where the system workload is very high, this leads to the hardware driven automatic BURST mode exit. In order not to increase memory consumption, convert 'done' into 'flags' to contain multiple indications: 1. ACPI_EC_COMMAND_COMPLETE: converting from original 'done' condition, indicating the completion of the command transaction. 2. ACPI_EC_COMMAND_POLL: indicating the availability of writing the first command byte. A new command can utilize this flag to compete for the right of accessing the underlying hardware. There is a follow-up bug fix that has utilized this new flag. The 2 flags are important because it also reflects a key concept of IO programs' design used in the system softwares. Normally an IO program running in the kernel should first be implemented in the asynchronous way. And the 2 flags are the most common way to implement its synchronous operations on top of the asynchronous operations: 1. POLL: This flag can be used to block until the asynchronous operations can happen. 2. COMPLETE: This flag can be used to block until the asynchronous operations have completed. By constructing code cleanly in this way, many difficult problems can be solved smoothly. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams Reported-and-tested-by: Hans de Goede Reported-by: Barton Xu Tested-by: Steffen Weber Tested-by: Arthur Chen Signed-off-by: Lv Zheng Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 83 ++++++++++++++++++++++++++++++++----------------------- 1 file changed, 48 insertions(+), 35 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 762b4cc9d7b..f09386e9745 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -78,6 +78,9 @@ enum { EC_FLAGS_BLOCKED, /* Transactions are blocked */ }; +#define ACPI_EC_COMMAND_POLL 0x01 /* Available for command byte */ +#define ACPI_EC_COMMAND_COMPLETE 0x02 /* Completed last byte */ + /* ec.c is compiled in acpi namespace so this shows up as acpi.ec_delay param */ static unsigned int ec_delay __read_mostly = ACPI_EC_DELAY; module_param(ec_delay, uint, 0644); @@ -109,7 +112,7 @@ struct transaction { u8 ri; u8 wlen; u8 rlen; - bool done; + u8 flags; }; struct acpi_ec *boot_ec, *first_ec; @@ -150,63 +153,68 @@ static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) outb(data, ec->data_addr); } -static int ec_transaction_done(struct acpi_ec *ec) +static int ec_transaction_completed(struct acpi_ec *ec) { unsigned long flags; int ret = 0; spin_lock_irqsave(&ec->lock, flags); - if (!ec->curr || ec->curr->done) + if (!ec->curr || (ec->curr->flags & ACPI_EC_COMMAND_COMPLETE)) ret = 1; spin_unlock_irqrestore(&ec->lock, flags); return ret; } -static void start_transaction(struct acpi_ec *ec) -{ - ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; - ec->curr->done = false; - acpi_ec_write_cmd(ec, ec->curr->command); -} - static void advance_transaction(struct acpi_ec *ec) { - unsigned long flags; struct transaction *t; u8 status; - spin_lock_irqsave(&ec->lock, flags); pr_debug("===== %s =====\n", in_interrupt() ? "IRQ" : "TASK"); status = acpi_ec_read_status(ec); t = ec->curr; if (!t) - goto unlock; - if (t->wlen > t->wi) { - if ((status & ACPI_EC_FLAG_IBF) == 0) - acpi_ec_write_data(ec, - t->wdata[t->wi++]); - else - goto err; - } else if (t->rlen > t->ri) { - if ((status & ACPI_EC_FLAG_OBF) == 1) { - t->rdata[t->ri++] = acpi_ec_read_data(ec); - if (t->rlen == t->ri) - t->done = true; + goto err; + if (t->flags & ACPI_EC_COMMAND_POLL) { + if (t->wlen > t->wi) { + if ((status & ACPI_EC_FLAG_IBF) == 0) + acpi_ec_write_data(ec, t->wdata[t->wi++]); + else + goto err; + } else if (t->rlen > t->ri) { + if ((status & ACPI_EC_FLAG_OBF) == 1) { + t->rdata[t->ri++] = acpi_ec_read_data(ec); + if (t->rlen == t->ri) + t->flags |= ACPI_EC_COMMAND_COMPLETE; + } else + goto err; + } else if (t->wlen == t->wi && + (status & ACPI_EC_FLAG_IBF) == 0) + t->flags |= ACPI_EC_COMMAND_COMPLETE; + return; + } else { + if ((status & ACPI_EC_FLAG_IBF) == 0) { + acpi_ec_write_cmd(ec, t->command); + t->flags |= ACPI_EC_COMMAND_POLL; } else goto err; - } else if (t->wlen == t->wi && - (status & ACPI_EC_FLAG_IBF) == 0) - t->done = true; - goto unlock; + return; + } err: /* * If SCI bit is set, then don't think it's a false IRQ * otherwise will take a not handled IRQ as a false one. */ - if (in_interrupt() && !(status & ACPI_EC_FLAG_SCI)) - ++t->irq_count; + if (!(status & ACPI_EC_FLAG_SCI)) { + if (in_interrupt() && t) + ++t->irq_count; + } +} -unlock: - spin_unlock_irqrestore(&ec->lock, flags); +static void start_transaction(struct acpi_ec *ec) +{ + ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; + ec->curr->flags = 0; + advance_transaction(ec); } static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data); @@ -231,15 +239,17 @@ static int ec_poll(struct acpi_ec *ec) /* don't sleep with disabled interrupts */ if (EC_FLAGS_MSI || irqs_disabled()) { udelay(ACPI_EC_MSI_UDELAY); - if (ec_transaction_done(ec)) + if (ec_transaction_completed(ec)) return 0; } else { if (wait_event_timeout(ec->wait, - ec_transaction_done(ec), + ec_transaction_completed(ec), msecs_to_jiffies(1))) return 0; } + spin_lock_irqsave(&ec->lock, flags); advance_transaction(ec); + spin_unlock_irqrestore(&ec->lock, flags); } while (time_before(jiffies, delay)); pr_debug("controller reset, restart transaction\n"); spin_lock_irqsave(&ec->lock, flags); @@ -637,10 +647,13 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state) static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, u32 gpe_number, void *data) { + unsigned long flags; struct acpi_ec *ec = data; + spin_lock_irqsave(&ec->lock, flags); advance_transaction(ec); - if (ec_transaction_done(ec) && + spin_unlock_irqrestore(&ec->lock, flags); + if (ec_transaction_completed(ec) && (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { wake_up(&ec->wait); ec_check_sci(ec, acpi_ec_read_status(ec)); -- cgit v1.2.3-70-g09d2 From 9b80f0f73ae1583c22325ede341c74195847618c Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:41:48 +0800 Subject: ACPI / EC: Remove duplicated ec_wait_ibf0() waiter After we've added the first command byte write into advance_transaction(), the IBF=0 waiter is duplicated with the command completion waiter implemented in the ec_poll() because: If IBF=1 blocked the first command byte write invoked in the task context ec_poll(), it would be kicked off upon IBF=0 interrupt or timed out and retried again in the task context. Remove this seperate and duplicate IBF=0 waiter. By doing so we can reduce the overall number of times to access the EC_SC(R) status register. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams Reported-and-tested-by: Hans de Goede Reported-by: Barton Xu Tested-by: Steffen Weber Tested-by: Arthur Chen Signed-off-by: Lv Zheng Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 27 +-------------------------- 1 file changed, 1 insertion(+), 26 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index f09386e9745..d016ea31b8e 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -281,23 +281,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, return ret; } -static int ec_check_ibf0(struct acpi_ec *ec) -{ - u8 status = acpi_ec_read_status(ec); - return (status & ACPI_EC_FLAG_IBF) == 0; -} - -static int ec_wait_ibf0(struct acpi_ec *ec) -{ - unsigned long delay = jiffies + msecs_to_jiffies(ec_delay); - /* interrupt wait manually if GPE mode is not active */ - while (time_before(jiffies, delay)) - if (wait_event_timeout(ec->wait, ec_check_ibf0(ec), - msecs_to_jiffies(1))) - return 0; - return -ETIME; -} - static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) { int status; @@ -318,12 +301,6 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) goto unlock; } } - if (ec_wait_ibf0(ec)) { - pr_err("input buffer is not empty, " - "aborting transaction\n"); - status = -ETIME; - goto end; - } pr_debug("transaction start (cmd=0x%02x, addr=0x%02x)\n", t->command, t->wdata ? t->wdata[0] : 0); /* disable GPE during transaction if storm is detected */ @@ -347,7 +324,6 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } pr_debug("transaction end\n"); -end: if (ec->global_lock) acpi_release_global_lock(glk); unlock: @@ -653,8 +629,7 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, spin_lock_irqsave(&ec->lock, flags); advance_transaction(ec); spin_unlock_irqrestore(&ec->lock, flags); - if (ec_transaction_completed(ec) && - (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { + if (ec_transaction_completed(ec)) { wake_up(&ec->wait); ec_check_sci(ec, acpi_ec_read_status(ec)); } -- cgit v1.2.3-70-g09d2 From c0d653412fc8450370167a3268b78fc772ff9c87 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:42:07 +0800 Subject: ACPI / EC: Fix race condition in ec_transaction_completed() There is a race condition in ec_transaction_completed(). When ec_transaction_completed() is called in the GPE handler, it could return true because of (ec->curr == NULL). Then the wake_up() invocation could complete the next command unexpectedly since there is no lock between the 2 invocations. With the previous cleanup, the IBF=0 waiter race need not be handled any more. It's now safe to return a flag from advance_condition() to indicate the requirement of wakeup, the flag is returned from a locked context. The ec_transaction_completed() is now only invoked by the ec_poll() where the ec->curr is ensured to be different from NULL. After cleaning up, the EVT_SCI=1 check should be moved out of the wakeup condition so that an EVT_SCI raised with (ec->curr == NULL) can trigger a QR_SC command. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams Reported-and-tested-by: Hans de Goede Reported-by: Barton Xu Tested-by: Steffen Weber Tested-by: Arthur Chen Signed-off-by: Lv Zheng Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index d016ea31b8e..49d89909b4e 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -158,16 +158,17 @@ static int ec_transaction_completed(struct acpi_ec *ec) unsigned long flags; int ret = 0; spin_lock_irqsave(&ec->lock, flags); - if (!ec->curr || (ec->curr->flags & ACPI_EC_COMMAND_COMPLETE)) + if (ec->curr && (ec->curr->flags & ACPI_EC_COMMAND_COMPLETE)) ret = 1; spin_unlock_irqrestore(&ec->lock, flags); return ret; } -static void advance_transaction(struct acpi_ec *ec) +static bool advance_transaction(struct acpi_ec *ec) { struct transaction *t; u8 status; + bool wakeup = false; pr_debug("===== %s =====\n", in_interrupt() ? "IRQ" : "TASK"); status = acpi_ec_read_status(ec); @@ -183,21 +184,25 @@ static void advance_transaction(struct acpi_ec *ec) } else if (t->rlen > t->ri) { if ((status & ACPI_EC_FLAG_OBF) == 1) { t->rdata[t->ri++] = acpi_ec_read_data(ec); - if (t->rlen == t->ri) + if (t->rlen == t->ri) { t->flags |= ACPI_EC_COMMAND_COMPLETE; + wakeup = true; + } } else goto err; } else if (t->wlen == t->wi && - (status & ACPI_EC_FLAG_IBF) == 0) + (status & ACPI_EC_FLAG_IBF) == 0) { t->flags |= ACPI_EC_COMMAND_COMPLETE; - return; + wakeup = true; + } + return wakeup; } else { if ((status & ACPI_EC_FLAG_IBF) == 0) { acpi_ec_write_cmd(ec, t->command); t->flags |= ACPI_EC_COMMAND_POLL; } else goto err; - return; + return wakeup; } err: /* @@ -208,13 +213,14 @@ err: if (in_interrupt() && t) ++t->irq_count; } + return wakeup; } static void start_transaction(struct acpi_ec *ec) { ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; ec->curr->flags = 0; - advance_transaction(ec); + (void)advance_transaction(ec); } static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data); @@ -248,7 +254,7 @@ static int ec_poll(struct acpi_ec *ec) return 0; } spin_lock_irqsave(&ec->lock, flags); - advance_transaction(ec); + (void)advance_transaction(ec); spin_unlock_irqrestore(&ec->lock, flags); } while (time_before(jiffies, delay)); pr_debug("controller reset, restart transaction\n"); @@ -627,12 +633,10 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, struct acpi_ec *ec = data; spin_lock_irqsave(&ec->lock, flags); - advance_transaction(ec); - spin_unlock_irqrestore(&ec->lock, flags); - if (ec_transaction_completed(ec)) { + if (advance_transaction(ec)) wake_up(&ec->wait); - ec_check_sci(ec, acpi_ec_read_status(ec)); - } + spin_unlock_irqrestore(&ec->lock, flags); + ec_check_sci(ec, acpi_ec_read_status(ec)); return ACPI_INTERRUPT_HANDLED | ACPI_REENABLE_GPE; } -- cgit v1.2.3-70-g09d2 From 4a3f6b5bf3f3293087a5f60ea3328715fe14b6de Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:42:19 +0800 Subject: ACPI / EC: Update revision due to recent changes The bug fixes and asynchronous improvements have been done to the EC driver by the previous commits. This patch increases the revision to 2.2 to indicate the behavior differences between the old and the new drivers. The copyright/authorship notices are also updated. Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 49d89909b4e..f8fb736e38d 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1,11 +1,14 @@ /* - * ec.c - ACPI Embedded Controller Driver (v2.1) + * ec.c - ACPI Embedded Controller Driver (v2.2) * - * Copyright (C) 2006-2008 Alexey Starikovskiy - * Copyright (C) 2006 Denis Sadykov - * Copyright (C) 2004 Luming Yu - * Copyright (C) 2001, 2002 Andy Grover - * Copyright (C) 2001, 2002 Paul Diefenbaugh + * Copyright (C) 2001-2014 Intel Corporation + * Author: 2014 Lv Zheng + * 2006, 2007 Alexey Starikovskiy + * 2006 Denis Sadykov + * 2004 Luming Yu + * 2001, 2002 Andy Grover + * 2001, 2002 Paul Diefenbaugh + * Copyright (C) 2008 Alexey Starikovskiy * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * -- cgit v1.2.3-70-g09d2 From dd43de20f540179863d9d7c3188b6a6cfde9a731 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:42:42 +0800 Subject: ACPI / EC: Add detailed fields debugging support of EC_SC(R). Developers really don't need to translate EC_SC(R) in mind as long as the field details are decoded in the debugging message. Tested-by: Gareth Williams Tested-by: Steffen Weber Tested-by: Hans de Goede Tested-by: Arthur Chen Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index f8fb736e38d..ff16132e5c5 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -55,6 +55,7 @@ /* EC status register */ #define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */ #define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */ +#define ACPI_EC_FLAG_CMD 0x08 /* Input buffer contains a command */ #define ACPI_EC_FLAG_BURST 0x10 /* burst mode */ #define ACPI_EC_FLAG_SCI 0x20 /* EC-SCI occurred */ @@ -133,26 +134,33 @@ static int EC_FLAGS_CLEAR_ON_RESUME; /* Needs acpi_ec_clear() on boot/resume */ static inline u8 acpi_ec_read_status(struct acpi_ec *ec) { u8 x = inb(ec->command_addr); - pr_debug("---> status = 0x%2.2x\n", x); + pr_debug("EC_SC(R) = 0x%2.2x " + "SCI_EVT=%d BURST=%d CMD=%d IBF=%d OBF=%d\n", + x, + !!(x & ACPI_EC_FLAG_SCI), + !!(x & ACPI_EC_FLAG_BURST), + !!(x & ACPI_EC_FLAG_CMD), + !!(x & ACPI_EC_FLAG_IBF), + !!(x & ACPI_EC_FLAG_OBF)); return x; } static inline u8 acpi_ec_read_data(struct acpi_ec *ec) { u8 x = inb(ec->data_addr); - pr_debug("---> data = 0x%2.2x\n", x); + pr_debug("EC_DATA(R) = 0x%2.2x\n", x); return x; } static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command) { - pr_debug("<--- command = 0x%2.2x\n", command); + pr_debug("EC_SC(W) = 0x%2.2x\n", command); outb(command, ec->command_addr); } static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) { - pr_debug("<--- data = 0x%2.2x\n", data); + pr_debug("EC_DATA(W) = 0x%2.2x\n", data); outb(data, ec->data_addr); } -- cgit v1.2.3-70-g09d2 From ed4b197ddd4d7aa6623e7777ea326c67c3a6b8ed Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 3 Jul 2014 00:35:09 +0100 Subject: ACPI / EC: Free saved_ec on error exit path Smatch detected two memory leaks on saved_ec: drivers/acpi/ec.c:1070 acpi_ec_ecdt_probe() warn: possible memory leak of 'saved_ec' drivers/acpi/ec.c:1109 acpi_ec_ecdt_probe() warn: possible memory leak of 'saved_ec' Free saved_ec on these two error exit paths to stop the memory leak. Note that saved_ec maybe null, but kfree on null is allowed. Signed-off-by: Colin Ian King Acked-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ff16132e5c5..a66ab658abb 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1069,8 +1069,10 @@ int __init acpi_ec_ecdt_probe(void) /* fall through */ } - if (EC_FLAGS_SKIP_DSDT_SCAN) + if (EC_FLAGS_SKIP_DSDT_SCAN) { + kfree(saved_ec); return -ENODEV; + } /* This workaround is needed only on some broken machines, * which require early EC, but fail to provide ECDT */ @@ -1108,6 +1110,7 @@ install: } error: kfree(boot_ec); + kfree(saved_ec); boot_ec = NULL; return -ENODEV; } -- cgit v1.2.3-70-g09d2 From 75646e758a0ecbed5024454507d5be5b9ea9dcbf Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Mon, 7 Jul 2014 15:47:12 +0800 Subject: ACPI / battery: Retry to get battery information if failed during probing Some machines (eg. Lenovo Z480) ECs are not stable during boot up and causes battery driver fails to be loaded due to failure of getting battery information from EC sometimes. After several retries, the operation will work. This patch is to retry to get battery information 5 times if the first try fails. Link: https://bugzilla.kernel.org/show_bug.cgi?id=75581 Reported-and-tested-by: naszar Cc: All applicable Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/battery.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 0d7116f34b9..bc0b286ff2b 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #ifdef CONFIG_ACPI_PROCFS_POWER @@ -1151,6 +1152,28 @@ static struct dmi_system_id bat_dmi_table[] = { {}, }; +/* + * Some machines'(E,G Lenovo Z480) ECs are not stable + * during boot up and this causes battery driver fails to be + * probed due to failure of getting battery information + * from EC sometimes. After several retries, the operation + * may work. So add retry code here and 20ms sleep between + * every retries. + */ +static int acpi_battery_update_retry(struct acpi_battery *battery) +{ + int retry, ret; + + for (retry = 5; retry; retry--) { + ret = acpi_battery_update(battery, false); + if (!ret) + break; + + msleep(20); + } + return ret; +} + static int acpi_battery_add(struct acpi_device *device) { int result = 0; @@ -1169,9 +1192,11 @@ static int acpi_battery_add(struct acpi_device *device) mutex_init(&battery->sysfs_lock); if (acpi_has_method(battery->device->handle, "_BIX")) set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags); - result = acpi_battery_update(battery, false); + + result = acpi_battery_update_retry(battery); if (result) goto fail; + #ifdef CONFIG_ACPI_PROCFS_POWER result = acpi_battery_add_fs(device); #endif -- cgit v1.2.3-70-g09d2 From 7abb1a530e87fce0d73f85ac7802648bb542cf26 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 16 May 2014 17:36:09 -0500 Subject: ARM: DRA7/AM43XX: fix header definition for omap44xx_restart omap44xx_restart is defined as a static void inline when DRA7/AM437X is defined alone, which implies that the restart function is no longer functional even though it is built in. So, fix the definition of the same. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index b2d252bf4a5..dc571f1d3b8 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -162,7 +162,8 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd) } #endif -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) void omap44xx_restart(enum reboot_mode mode, const char *cmd); #else static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd) -- cgit v1.2.3-70-g09d2 From e120fb459693bbc1ac3eabdd65c3659d7cfbfd2a Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 4 Jul 2014 12:55:43 +0300 Subject: ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on After clarification from the hardware team it was found that this 1.8V PHY supply can't be switched OFF when SoC is Active. Since the PHY IPs don't contain isolation logic built in the design to allow the power rail to be switched off, there is a very high risk of IP reliability and additional leakage paths which can result in additional power consumption. The only scenario where this rail can be switched off is part of Power on reset sequencing, but it needs to be kept always-on during operation. This patch is required for proper functionality of USB, SATA and PCIe on DRA7-evm. CC: Rajendra Nayak CC: Tero Kristo Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4adc28039c3..83089540e32 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -240,6 +240,7 @@ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; }; -- cgit v1.2.3-70-g09d2 From 526570cb2067363ec93681837e43b4c774b1616c Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Tue, 24 Jun 2014 00:24:27 -0500 Subject: ARM: OMAP2+: create dsp device only on OMAP3 SoCs The DSP platform device for TI DSP/Bridge is currently created unconditionally whenever CONFIG_TIDSPBRIDGE is enabled. This device should only be created on OMAP34xx/ OMAP36xx SoCs, and not for other OMAP3 derived SoCs or when booting multi-arch images on other SoCs. So, add a check for the SoC family both before creating the device and allocating the carveout memory for the device. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/dsp.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index b8208b4b1bd..f7492df1cbb 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -29,6 +29,7 @@ #ifdef CONFIG_TIDSPBRIDGE_DVFS #include "omap-pm.h" #endif +#include "soc.h" #include @@ -59,6 +60,9 @@ void __init omap_dsp_reserve_sdram_memblock(void) phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; phys_addr_t paddr; + if (!cpu_is_omap34xx()) + return; + if (!size) return; @@ -83,6 +87,9 @@ static int __init omap_dsp_init(void) int err = -ENOMEM; struct omap_dsp_platform_data *pdata = &omap_dsp_pdata; + if (!cpu_is_omap34xx()) + return 0; + pdata->phys_mempool_base = omap_dsp_get_mempool_base(); if (pdata->phys_mempool_base) { @@ -115,6 +122,9 @@ module_init(omap_dsp_init); static void __exit omap_dsp_exit(void) { + if (!cpu_is_omap34xx()) + return; + platform_device_unregister(omap_dsp_pdev); } module_exit(omap_dsp_exit); -- cgit v1.2.3-70-g09d2 From 68e2eb533ef84197d6a60d23f45070cddcf51753 Mon Sep 17 00:00:00 2001 From: Guido Martínez Date: Wed, 2 Jul 2014 10:35:18 -0300 Subject: ARM: OMAP2+: Make GPMC skip disabled devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, child nodes of the gpmc node are iterated and probed regardless of their 'status' property. This means adding 'status = "disabled";' has no effect. This patch changes the iteration to only probe nodes marked as available. Signed-off-by: Guido Martínez Tested-by: Pekon Gupta Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2c0c2816900..8bc13380f0a 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1615,7 +1615,7 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } - for_each_child_of_node(pdev->dev.of_node, child) { + for_each_available_child_of_node(pdev->dev.of_node, child) { if (!child->name) continue; -- cgit v1.2.3-70-g09d2 From 90571d856a01bb2d4eaa6339bcd7c28d9cb4bc59 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 3 Jul 2014 12:51:22 +0300 Subject: ARM: dts: am335x-evm: Enable the McASP FIFO for audio The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evm.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index ecb267767cf..e2156a583de 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -529,8 +529,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tps { -- cgit v1.2.3-70-g09d2 From 6f2f52b5960d090e81db59f4682cea7463bfd7cd Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 3 Jul 2014 12:51:23 +0300 Subject: ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evmsk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ab9a34ce524..80a3b215e7d 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -560,8 +560,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tscadc { -- cgit v1.2.3-70-g09d2 From 24faebd641ba75ccbbbb6d8f9131a32881e3dcd2 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 25 Jun 2014 13:42:05 +0200 Subject: ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA. As this board use external clock for RMII interface we should specify 'rmii' phy mode and 'rmii-clock-ext' to make ethernet working. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-igep0033.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 8a0a72dc7dd..a1a0cc5eb35 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -105,10 +105,16 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; }; &elm { -- cgit v1.2.3-70-g09d2 From 145e74a4e5022225adb84f4e5d4fff7938475c35 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 3 Jul 2014 13:44:23 -0700 Subject: hwmon: (adm1031) Fix writes to limit registers Upper limit for write operations to temperature limit registers was clamped to a fractional value. However, limit registers do not support fractional values. As a result, upper limits of 127.5 degrees C or higher resulted in a rounded limit of 128 degrees C. Since limit registers are signed, this was stored as -128 degrees C. Clamp limits to (-55, +127) degrees C to solve the problem. Value on writes to auto_temp[12]_min and auto_temp[12]_max were not clamped at all, but masked. As a result, out-of-range writes resulted in a more or less arbitrary limit. Clamp those attributes to (0, 127) degrees C for more predictable results. Cc: Axel Lin Cc: stable@vger.kernel.org Reviewed-by: Jean Delvare Signed-off-by: Guenter Roeck --- drivers/hwmon/adm1031.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index a8a540ca8c3..51c1a5a165a 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -365,6 +365,7 @@ set_auto_temp_min(struct device *dev, struct device_attribute *attr, if (ret) return ret; + val = clamp_val(val, 0, 127000); mutex_lock(&data->update_lock); data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]); adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), @@ -394,6 +395,7 @@ set_auto_temp_max(struct device *dev, struct device_attribute *attr, if (ret) return ret; + val = clamp_val(val, 0, 127000); mutex_lock(&data->update_lock); data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]); @@ -696,7 +698,7 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr), @@ -717,7 +719,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr), @@ -738,7 +740,7 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_crit[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr), -- cgit v1.2.3-70-g09d2 From 3179e8e684603645b573fdc46139473d5ee4b189 Mon Sep 17 00:00:00 2001 From: Wen-chien Jesse Sung Date: Wed, 2 Jul 2014 21:06:59 +0800 Subject: HID: use multi input quirk for 22b9:2968 This device generates ABS_Z and ABS_RX events instead of ABS_X and ABS_Y. Signed-off-by: Wen-chien Jesse Sung Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 1efeb12a38c..48b66bbffc9 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -323,6 +323,7 @@ #define USB_VENDOR_ID_ETURBOTOUCH 0x22b9 #define USB_DEVICE_ID_ETURBOTOUCH 0x0006 +#define USB_DEVICE_ID_ETURBOTOUCH_2968 0x2968 #define USB_VENDOR_ID_EZKEY 0x0518 #define USB_DEVICE_ID_BTC_8193 0x0002 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index fbaefc34ee9..31e6727cd00 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -49,6 +49,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH_2968, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS }, { USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT }, -- cgit v1.2.3-70-g09d2 From 5a6024f1604eef119cf3a6fa413fe0261a81a8f3 Mon Sep 17 00:00:00 2001 From: Yasuaki Ishimatsu Date: Mon, 7 Jul 2014 09:56:48 -0400 Subject: workqueue: zero cpumask of wq_numa_possible_cpumask on init When hot-adding and onlining CPU, kernel panic occurs, showing following call trace. BUG: unable to handle kernel paging request at 0000000000001d08 IP: [] __alloc_pages_nodemask+0x9d/0xb10 PGD 0 Oops: 0000 [#1] SMP ... Call Trace: [] ? cpumask_next_and+0x35/0x50 [] ? find_busiest_group+0x113/0x8f0 [] ? deactivate_slab+0x349/0x3c0 [] new_slab+0x91/0x300 [] __slab_alloc+0x2bb/0x482 [] ? copy_process.part.25+0xfc/0x14c0 [] ? load_balance+0x218/0x890 [] ? sched_clock+0x9/0x10 [] ? trace_clock_local+0x9/0x10 [] kmem_cache_alloc_node+0x8c/0x200 [] copy_process.part.25+0xfc/0x14c0 [] ? trace_buffer_unlock_commit+0x4d/0x60 [] ? kthread_create_on_node+0x140/0x140 [] do_fork+0xbc/0x360 [] kernel_thread+0x26/0x30 [] kthreadd+0x2c2/0x300 [] ? kthread_create_on_cpu+0x60/0x60 [] ret_from_fork+0x7c/0xb0 [] ? kthread_create_on_cpu+0x60/0x60 In my investigation, I found the root cause is wq_numa_possible_cpumask. All entries of wq_numa_possible_cpumask is allocated by alloc_cpumask_var_node(). And these entries are used without initializing. So these entries have wrong value. When hot-adding and onlining CPU, wq_update_unbound_numa() is called. wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq() calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set as follow: 3592 /* if cpumask is contained inside a NUMA node, we belong to that node */ 3593 if (wq_numa_enabled) { 3594 for_each_node(node) { 3595 if (cpumask_subset(pool->attrs->cpumask, 3596 wq_numa_possible_cpumask[node])) { 3597 pool->node = node; 3598 break; 3599 } 3600 } 3601 } But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong node is selected. As a result, kernel panic occurs. By this patch, all entries of wq_numa_possible_cpumask are allocated by zalloc_cpumask_var_node to initialize them. And the panic disappeared. Signed-off-by: Yasuaki Ishimatsu Reviewed-by: Lai Jiangshan Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Fixes: bce903809ab3 ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]") --- kernel/workqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 6f5f9c7323f..35974ac6960 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -4880,7 +4880,7 @@ static void __init wq_numa_init(void) BUG_ON(!tbl); for_each_node(node) - BUG_ON(!alloc_cpumask_var_node(&tbl[node], GFP_KERNEL, + BUG_ON(!zalloc_cpumask_var_node(&tbl[node], GFP_KERNEL, node_online(node) ? node : NUMA_NO_NODE)); for_each_possible_cpu(cpu) { -- cgit v1.2.3-70-g09d2 From f6c2dd20108c35e30e2c1f3c6142d189451a626b Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 6 Jul 2014 11:39:24 -0700 Subject: hwmon: (emc2103) Clamp limits instead of bailing out It is customary to clamp limits instead of bailing out with an error if a configured limit is out of the range supported by the driver. This simplifies limit configuration, since the user will not typically know chip and/or driver specific limits. Reviewed-by: Jean Delvare Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/emc2103.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c index fd892dd48e4..78002de46cb 100644 --- a/drivers/hwmon/emc2103.c +++ b/drivers/hwmon/emc2103.c @@ -250,9 +250,7 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *da, if (result < 0) return result; - val = DIV_ROUND_CLOSEST(val, 1000); - if ((val < -63) || (val > 127)) - return -EINVAL; + val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127); mutex_lock(&data->update_lock); data->temp_min[nr] = val; @@ -274,9 +272,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *da, if (result < 0) return result; - val = DIV_ROUND_CLOSEST(val, 1000); - if ((val < -63) || (val > 127)) - return -EINVAL; + val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127); mutex_lock(&data->update_lock); data->temp_max[nr] = val; @@ -390,15 +386,14 @@ static ssize_t set_fan_target(struct device *dev, struct device_attribute *da, { struct emc2103_data *data = emc2103_update_device(dev); struct i2c_client *client = to_i2c_client(dev); - long rpm_target; + unsigned long rpm_target; - int result = kstrtol(buf, 10, &rpm_target); + int result = kstrtoul(buf, 10, &rpm_target); if (result < 0) return result; /* Datasheet states 16384 as maximum RPM target (table 3.2) */ - if ((rpm_target < 0) || (rpm_target > 16384)) - return -EINVAL; + rpm_target = clamp_val(rpm_target, 0, 16384); mutex_lock(&data->update_lock); -- cgit v1.2.3-70-g09d2 From 7fe7381cbdadf16792e733789983690b3fa82880 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 7 Jul 2014 07:10:10 -0700 Subject: hwmon: (adc128d818) Drop write support on inX_input attributes Writes into input registers doesn't make sense, even more so since the writes actually ended up writing into the maximum limit registers. Drop it. Cc: stable@vger.kernel.org Reviewed-by: Jean Delvare Signed-off-by: Guenter Roeck --- drivers/hwmon/adc128d818.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/hwmon/adc128d818.c b/drivers/hwmon/adc128d818.c index 5ffd81f19d0..0625e50d7a6 100644 --- a/drivers/hwmon/adc128d818.c +++ b/drivers/hwmon/adc128d818.c @@ -239,50 +239,50 @@ static ssize_t adc128_show_alarm(struct device *dev, return sprintf(buf, "%u\n", !!(alarms & mask)); } -static SENSOR_DEVICE_ATTR_2(in0_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 0, 0); +static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, + adc128_show_in, NULL, 0, 0); static SENSOR_DEVICE_ATTR_2(in0_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 0, 1); static SENSOR_DEVICE_ATTR_2(in0_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 0, 2); -static SENSOR_DEVICE_ATTR_2(in1_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 1, 0); +static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, + adc128_show_in, NULL, 1, 0); static SENSOR_DEVICE_ATTR_2(in1_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 1, 1); static SENSOR_DEVICE_ATTR_2(in1_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 1, 2); -static SENSOR_DEVICE_ATTR_2(in2_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 2, 0); +static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, + adc128_show_in, NULL, 2, 0); static SENSOR_DEVICE_ATTR_2(in2_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 2, 1); static SENSOR_DEVICE_ATTR_2(in2_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 2, 2); -static SENSOR_DEVICE_ATTR_2(in3_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 3, 0); +static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, + adc128_show_in, NULL, 3, 0); static SENSOR_DEVICE_ATTR_2(in3_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 3, 1); static SENSOR_DEVICE_ATTR_2(in3_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 3, 2); -static SENSOR_DEVICE_ATTR_2(in4_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 4, 0); +static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, + adc128_show_in, NULL, 4, 0); static SENSOR_DEVICE_ATTR_2(in4_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 4, 1); static SENSOR_DEVICE_ATTR_2(in4_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 4, 2); -static SENSOR_DEVICE_ATTR_2(in5_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 5, 0); +static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, + adc128_show_in, NULL, 5, 0); static SENSOR_DEVICE_ATTR_2(in5_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 5, 1); static SENSOR_DEVICE_ATTR_2(in5_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 5, 2); -static SENSOR_DEVICE_ATTR_2(in6_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 6, 0); +static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO, + adc128_show_in, NULL, 6, 0); static SENSOR_DEVICE_ATTR_2(in6_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 6, 1); static SENSOR_DEVICE_ATTR_2(in6_max, S_IWUSR | S_IRUGO, -- cgit v1.2.3-70-g09d2 From 9a2c33a422d60e8e55c5aff6752522dc39993b16 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 7 Jul 2014 13:53:03 +0100 Subject: ARM: l2c: fix revision checking The revision checking in l2c310_enable() was not correct; we were masking the part number rather than the revision number. Fix this to use the correct macro. Fixes: 4374d64933b1 ("ARM: l2c: add automatic enable of early BRESP") Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 076172b6942..7c3fb41a462 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -664,7 +664,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) { - unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK; + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; if (rev >= L310_CACHE_ID_RTL_R2P0) { -- cgit v1.2.3-70-g09d2 From c3a4561796cffae6996264876ffca147b5c3709a Mon Sep 17 00:00:00 2001 From: Kinglong Mee Date: Sun, 6 Jul 2014 11:34:43 +0800 Subject: nfsd: Fix bad reserving space for encoding rdattr_error Introduced by commit 561f0ed498 (nfsd4: allow large readdirs). Signed-off-by: Kinglong Mee Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4xdr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index 2fc7abebeb9..b56b1cc0271 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -2641,7 +2641,7 @@ nfsd4_encode_rdattr_error(struct xdr_stream *xdr, __be32 nfserr) { __be32 *p; - p = xdr_reserve_space(xdr, 6); + p = xdr_reserve_space(xdr, 20); if (!p) return NULL; *p++ = htonl(2); -- cgit v1.2.3-70-g09d2 From 867f9d463b82462793ea4610e748be0b04b37fc7 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Thu, 19 Jun 2014 11:19:16 +0100 Subject: ACPI / resources: only reject zero length resources based at address zero The recently merged change (in v3.14-rc6) to ACPI resource detection (below) causes all zero length ACPI resources to be elided from the table: commit b355cee88e3b1a193f0e9a81db810f6f83ad728b Author: Zhang Rui Date: Thu Feb 27 11:37:15 2014 +0800 ACPI / resources: ignore invalid ACPI device resources This change has caused a regression in (at least) serial port detection for a number of machines (see LP#1313981 [1]). These seem to represent their IO regions (presumably incorrectly) as a zero length region. Reverting the above commit restores these serial devices. Only elide zero length resources which lie at address 0. Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources) Signed-off-by: Andy Whitcroft Acked-by: Zhang Rui Cc: 3.14+ # 3.14+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/resource.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index 0bdacc5e26a..2ba8f02ced3 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -77,7 +77,7 @@ bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res) switch (ares->type) { case ACPI_RESOURCE_TYPE_MEMORY24: memory24 = &ares->data.memory24; - if (!memory24->address_length) + if (!memory24->minimum && !memory24->address_length) return false; acpi_dev_get_memresource(res, memory24->minimum, memory24->address_length, @@ -85,7 +85,7 @@ bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res) break; case ACPI_RESOURCE_TYPE_MEMORY32: memory32 = &ares->data.memory32; - if (!memory32->address_length) + if (!memory32->minimum && !memory32->address_length) return false; acpi_dev_get_memresource(res, memory32->minimum, memory32->address_length, @@ -93,7 +93,7 @@ bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res) break; case ACPI_RESOURCE_TYPE_FIXED_MEMORY32: fixed_memory32 = &ares->data.fixed_memory32; - if (!fixed_memory32->address_length) + if (!fixed_memory32->address && !fixed_memory32->address_length) return false; acpi_dev_get_memresource(res, fixed_memory32->address, fixed_memory32->address_length, @@ -150,7 +150,7 @@ bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res) switch (ares->type) { case ACPI_RESOURCE_TYPE_IO: io = &ares->data.io; - if (!io->address_length) + if (!io->minimum && !io->address_length) return false; acpi_dev_get_ioresource(res, io->minimum, io->address_length, @@ -158,7 +158,7 @@ bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res) break; case ACPI_RESOURCE_TYPE_FIXED_IO: fixed_io = &ares->data.fixed_io; - if (!fixed_io->address_length) + if (!fixed_io->address && !fixed_io->address_length) return false; acpi_dev_get_ioresource(res, fixed_io->address, fixed_io->address_length, -- cgit v1.2.3-70-g09d2 From 232de514379082e7ec431c66c9713a6ef23d5dcb Mon Sep 17 00:00:00 2001 From: Josef Gajdusek Date: Tue, 17 Jun 2014 23:15:49 +0200 Subject: ACPI / battery: fix wrong value of capacity_now reported when fully charged It seems that some batteries (noticed on DELL JYPJ136) assume capacity_now = design_capacity when fully charged. This causes reported capacity to suddenly jump to >full_charge_capacity (and that means capacity reported to userspace is >100% and incorrect) values after 99%. This patch detects capacity_now > full_charge_capacity, notifies userspace (unless it is the known bug where capacity_now == design_capacity) and trims the value to full_charge_capacity. Signed-off-by: Josef Gajdusek Signed-off-by: Rafael J. Wysocki --- drivers/acpi/battery.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index bc0b286ff2b..130f513e08c 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -535,6 +535,20 @@ static int acpi_battery_get_state(struct acpi_battery *battery) " invalid.\n"); } + /* + * When fully charged, some batteries wrongly report + * capacity_now = design_capacity instead of = full_charge_capacity + */ + if (battery->capacity_now > battery->full_charge_capacity + && battery->full_charge_capacity != ACPI_BATTERY_VALUE_UNKNOWN) { + battery->capacity_now = battery->full_charge_capacity; + if (battery->capacity_now != battery->design_capacity) + printk_once(KERN_WARNING FW_BUG + "battery: reported current charge level (%d) " + "is higher than reported maximum charge level (%d).\n", + battery->capacity_now, battery->full_charge_capacity); + } + if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags) && battery->capacity_now >= 0 && battery->capacity_now <= 100) battery->capacity_now = (battery->capacity_now * -- cgit v1.2.3-70-g09d2 From 0b9f7d93ca6109048a4eb06332b666b6e29df4fe Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Mon, 7 Jul 2014 15:43:51 +0800 Subject: ACPI / i915: ignore firmware requests for backlight change Some Thinkpad laptops' firmware will initiate a backlight level change request through operation region on the events of AC plug/unplug, but since we are not using firmware's interface to do the backlight setting on these affected laptops, we do not want the firmware to use some arbitrary value from its ASL variable to set the backlight level on AC plug/unplug either. Link: https://bugzilla.kernel.org/show_bug.cgi?id=76491 Link: https://bugzilla.kernel.org/show_bug.cgi?id=77091 Reported-and-tested-by: Igor Gnatenko Reported-and-tested-by: Anton Gubarkov Signed-off-by: Aaron Lu Acked-by: Jani Nikula Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 3 ++- drivers/gpu/drm/i915/intel_opregion.c | 9 +++++++++ include/acpi/video.h | 2 ++ 3 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index fb9ffe9adc6..5bb1278e932 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -241,13 +241,14 @@ static bool acpi_video_use_native_backlight(void) return use_native_backlight_dmi; } -static bool acpi_video_verify_backlight_support(void) +bool acpi_video_verify_backlight_support(void) { if (acpi_osi_is_win8() && acpi_video_use_native_backlight() && backlight_device_registered(BACKLIGHT_RAW)) return false; return acpi_video_backlight_support(); } +EXPORT_SYMBOL_GPL(acpi_video_verify_backlight_support); /* backlight device sysfs support */ static int acpi_video_get_brightness(struct backlight_device *bd) diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c index 2e2c71fcc9e..4f6b53998d7 100644 --- a/drivers/gpu/drm/i915/intel_opregion.c +++ b/drivers/gpu/drm/i915/intel_opregion.c @@ -403,6 +403,15 @@ static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) DRM_DEBUG_DRIVER("bclp = 0x%08x\n", bclp); + /* + * If the acpi_video interface is not supposed to be used, don't + * bother processing backlight level change requests from firmware. + */ + if (!acpi_video_verify_backlight_support()) { + DRM_DEBUG_KMS("opregion backlight request ignored\n"); + return 0; + } + if (!(bclp & ASLE_BCLP_VALID)) return ASLC_BACKLIGHT_FAILED; diff --git a/include/acpi/video.h b/include/acpi/video.h index ea4c7bbded4..843ef1adfbf 100644 --- a/include/acpi/video.h +++ b/include/acpi/video.h @@ -22,6 +22,7 @@ extern void acpi_video_unregister(void); extern void acpi_video_unregister_backlight(void); extern int acpi_video_get_edid(struct acpi_device *device, int type, int device_id, void **edid); +extern bool acpi_video_verify_backlight_support(void); #else static inline int acpi_video_register(void) { return 0; } static inline void acpi_video_unregister(void) { return; } @@ -31,6 +32,7 @@ static inline int acpi_video_get_edid(struct acpi_device *device, int type, { return -ENODEV; } +static inline bool acpi_video_verify_backlight_support(void) { return false; } #endif #endif -- cgit v1.2.3-70-g09d2 From 08a56226d84706d402372d891550e130ef5df9f0 Mon Sep 17 00:00:00 2001 From: Edward Lin Date: Fri, 20 Jun 2014 16:13:42 +0800 Subject: ACPI / video: Add Dell Inspiron 5737 to the blacklist With win8 capabiltiy, the ACPI backlight control is broken. The system also loses backlight setting when resuming from S3. Add this model to the the ACPI video detect blacklist to make backlight functionality work. Although backlight functionality works via video.use_native_backlight=1, this approach may be safer. Signed-off-by: Edward Lin Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video_detect.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 33e3db548a2..c42feb2bacd 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -166,6 +166,14 @@ static struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"), }, }, + { + .callback = video_detect_force_vendor, + .ident = "Dell Inspiron 5737", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5737"), + }, + }, { }, }; -- cgit v1.2.3-70-g09d2 From ab7027de5c01e4fba0e5ef946f0db27b2e3d799d Mon Sep 17 00:00:00 2001 From: Martin Kepplinger Date: Mon, 23 Jun 2014 22:30:46 +0200 Subject: ACPI / video: Add Acer TravelMate B113 to native backlight blacklist Fix backlight control for Acer TravelMate B113 Laptop by adding it to the video_dmi_table. A workaround before that was to use acpi_osi=Linux or acpi_backlight=vendor on boot but even then, only the function- keys worked. With this change there is no need for boot parameters and DE's controls work as well. Signed-off-by: Martin Kepplinger [rjw: Subject] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5bb1278e932..071c1dfb93f 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -563,6 +563,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire V5-471G"), }, }, + { + .callback = video_set_use_native_backlight, + .ident = "Acer TravelMate B113", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate B113"), + }, + }, { .callback = video_set_use_native_backlight, .ident = "HP ProBook 4340s", -- cgit v1.2.3-70-g09d2 From 35e75645f16c86918f26df1bfc2c24ad8ebb5a17 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Jul 2014 08:03:49 +0900 Subject: ARM: EXYNOS: Update secondary boot addr for secure mode Almost all Exynos-series of SoCs that run in secure mode don't need additional offset for every CPU, with Exynos4412 being the only exception. Tested on Origen-Quad (Exynos4412) and Arndale-Octa (Exynos5420). While at it, fix the coding style (space around *). Signed-off-by: Sachin Kamat Signed-off-by: Tushar Behera Tested-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/firmware.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index eb91d2350f8..e8797bb7887 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) boot_reg = sysram_ns_base_addr + 0x1c; - if (!soc_is_exynos4212() && !soc_is_exynos3250()) - boot_reg += 4*cpu; + /* + * Almost all Exynos-series of SoCs that run in secure mode don't need + * additional offset for every CPU, with Exynos4412 being the only + * exception. + */ + if (soc_is_exynos4412()) + boot_reg += 4 * cpu; __raw_writel(boot_addr, boot_reg); return 0; -- cgit v1.2.3-70-g09d2 From be0b420ad6123e587738a67a9eff3ec213a57604 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 8 Jul 2014 08:31:41 +0900 Subject: ARM: dts: Update the parent for Audss clocks in Exynos5420 Currently CLK_FOUT_EPLL was set as one of the parents of AUDSS mux. As per the user manual, it should be CLK_MAU_EPLL. The problem surfaced when the bootloader in Peach-pit board set the EPLL clock as the parent of AUDSS mux. While booting the kernel, we used to get a system hang during late boot if CLK_MAU_EPLL was disabled. Signed-off-by: Tushar Behera Signed-off-by: Shaik Ameer Basha Reported-by: Kevin Hilman Tested-by: Javier Martinez Canillas Tested-by: Doug Anderson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index e38532271ef..79e9119d3f8 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -167,7 +167,7 @@ compatible = "samsung,exynos5420-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; -- cgit v1.2.3-70-g09d2 From 797a816221655d7204c6a5536d1400c022b01939 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 12 Jun 2014 14:26:37 +1000 Subject: drm/gk104/ram: bash mpll bit 31 on Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c b/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c index 1ad3ea50313..c5b46e30231 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c @@ -200,6 +200,7 @@ r1373f4_init(struct nve0_ramfuc *fuc) /* (re)program mempll, if required */ if (ram->mode == 2) { ram_mask(fuc, 0x1373f4, 0x00010000, 0x00000000); + ram_mask(fuc, 0x132000, 0x80000000, 0x80000000); ram_mask(fuc, 0x132000, 0x00000001, 0x00000000); ram_mask(fuc, 0x132004, 0x103fffff, mcoef); ram_mask(fuc, 0x132000, 0x00000001, 0x00000001); -- cgit v1.2.3-70-g09d2 From 3c4be80bce681740d31646b8aff06d82ef453566 Mon Sep 17 00:00:00 2001 From: Stéphane Marchesin Date: Fri, 27 Jun 2014 13:17:25 -0700 Subject: drm/nouveau/fb: Prevent inlining of ramfuc_reg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When gcc 4.8 inlines this function, it eats up 16 bytes on the stack every time. Eventually we hit warnings because our stack grew too much: ramnve0.c:1383:1: error: the frame size of 1496 bytes is larger than 1024 bytes We fix this by preventing inlining for this function. Signed-off-by: Stéphane Marchesin Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h b/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h index 0f57fcfe0bb..04e38492e74 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h @@ -26,7 +26,7 @@ ramfuc_reg2(u32 addr1, u32 addr2) }; } -static inline struct ramfuc_reg +static noinline struct ramfuc_reg ramfuc_reg(u32 addr) { return ramfuc_reg2(addr, addr); -- cgit v1.2.3-70-g09d2 From 276e526cfb257add928a57b196ea3e5c22b703ef Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 30 Jun 2014 11:10:02 +1000 Subject: drm/nv50-/kms: pass a non-zero value for head to sor dpms methods There's Apple machines out there which (probably completely arbitrarily) restrict each output path to a particular head. This causes us to not be able to locate the output data needed to power on/off the DP output correctly. We fix this by passing in a head index we know is valid (as opposed to "head 0"). Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index afdf607df3e..4c534b7b04d 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -1741,7 +1741,8 @@ nv50_sor_dpms(struct drm_encoder *encoder, int mode) } } - mthd = (ffs(nv_encoder->dcb->sorconf.link) - 1) << 2; + mthd = (ffs(nv_encoder->dcb->heads) - 1) << 3; + mthd |= (ffs(nv_encoder->dcb->sorconf.link) - 1) << 2; mthd |= nv_encoder->or; if (nv_encoder->dcb->type == DCB_OUTPUT_DP) { -- cgit v1.2.3-70-g09d2 From 028791bb7d662550c7435d38daeb1f0b88ed5b17 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 30 Jun 2014 13:04:14 +1000 Subject: drm/nouveau/kms: restore fbcon after display has been resumed Under some complicated circumstances (boot, suspend, resume, attach second display, suspend, resume, suspend, detach second display, resume, suspend, attach second display, resume), the fb_set_suspend() call can somehow result in a modeset being attempted before we're ready for it and things blow up in fun ways. Running display init first fixes the issue. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drm.c | 17 +++++++++-------- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 13 +++---------- drivers/gpu/drm/nouveau/nouveau_fbcon.h | 1 - 3 files changed, 12 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index ddd83756b9a..5425ffe3931 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -652,12 +652,12 @@ int nouveau_pmops_resume(struct device *dev) ret = nouveau_do_resume(drm_dev); if (ret) return ret; - if (drm_dev->mode_config.num_crtc) - nouveau_fbcon_set_suspend(drm_dev, 0); - nouveau_fbcon_zfill_all(drm_dev); - if (drm_dev->mode_config.num_crtc) + if (drm_dev->mode_config.num_crtc) { nouveau_display_resume(drm_dev); + nouveau_fbcon_set_suspend(drm_dev, 0); + } + return 0; } @@ -683,11 +683,12 @@ static int nouveau_pmops_thaw(struct device *dev) ret = nouveau_do_resume(drm_dev); if (ret) return ret; - if (drm_dev->mode_config.num_crtc) - nouveau_fbcon_set_suspend(drm_dev, 0); - nouveau_fbcon_zfill_all(drm_dev); - if (drm_dev->mode_config.num_crtc) + + if (drm_dev->mode_config.num_crtc) { nouveau_display_resume(drm_dev); + nouveau_fbcon_set_suspend(drm_dev, 0); + } + return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 64a42cfd371..191665ee7f5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -531,17 +531,10 @@ nouveau_fbcon_set_suspend(struct drm_device *dev, int state) if (state == 1) nouveau_fbcon_save_disable_accel(dev); fb_set_suspend(drm->fbcon->helper.fbdev, state); - if (state == 0) + if (state == 0) { nouveau_fbcon_restore_accel(dev); + nouveau_fbcon_zfill(dev, drm->fbcon); + } console_unlock(); } } - -void -nouveau_fbcon_zfill_all(struct drm_device *dev) -{ - struct nouveau_drm *drm = nouveau_drm(dev); - if (drm->fbcon) { - nouveau_fbcon_zfill(dev, drm->fbcon); - } -} diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.h b/drivers/gpu/drm/nouveau/nouveau_fbcon.h index fdfc0c94fbc..fcff797d208 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.h +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.h @@ -61,7 +61,6 @@ void nouveau_fbcon_gpu_lockup(struct fb_info *info); int nouveau_fbcon_init(struct drm_device *dev); void nouveau_fbcon_fini(struct drm_device *dev); void nouveau_fbcon_set_suspend(struct drm_device *dev, int state); -void nouveau_fbcon_zfill_all(struct drm_device *dev); void nouveau_fbcon_save_disable_accel(struct drm_device *dev); void nouveau_fbcon_restore_accel(struct drm_device *dev); -- cgit v1.2.3-70-g09d2 From 0713b4510e62411071b748d786043cdaada56ce5 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 1 Jul 2014 10:54:52 +1000 Subject: drm/nouveau/dp: fix required link bandwidth calculations Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/disp/nv50.c | 6 +++--- drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c | 6 +++--- drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c | 8 +++++--- 3 files changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c index 26e962b7e70..2283c442a10 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c @@ -1516,11 +1516,11 @@ nv50_disp_intr_unk20_2(struct nv50_disp_priv *priv, int head) } switch ((ctrl & 0x000f0000) >> 16) { - case 6: datarate = pclk * 30 / 8; break; - case 5: datarate = pclk * 24 / 8; break; + case 6: datarate = pclk * 30; break; + case 5: datarate = pclk * 24; break; case 2: default: - datarate = pclk * 18 / 8; + datarate = pclk * 18; break; } diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c b/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c index 48aa38a87e3..fa30d8196f3 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c @@ -1159,11 +1159,11 @@ nvd0_disp_intr_unk2_2(struct nv50_disp_priv *priv, int head) if (outp->info.type == DCB_OUTPUT_DP) { u32 sync = nv_rd32(priv, 0x660404 + (head * 0x300)); switch ((sync & 0x000003c0) >> 6) { - case 6: pclk = pclk * 30 / 8; break; - case 5: pclk = pclk * 24 / 8; break; + case 6: pclk = pclk * 30; break; + case 5: pclk = pclk * 24; break; case 2: default: - pclk = pclk * 18 / 8; + pclk = pclk * 18; break; } diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c b/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c index 52c299c3d30..eb2d7789555 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c @@ -34,7 +34,7 @@ nvkm_output_dp_train(struct nvkm_output *base, u32 datarate, bool wait) struct nvkm_output_dp *outp = (void *)base; bool retrain = true; u8 link[2], stat[3]; - u32 rate; + u32 linkrate; int ret, i; /* check that the link is trained at a high enough rate */ @@ -44,8 +44,10 @@ nvkm_output_dp_train(struct nvkm_output *base, u32 datarate, bool wait) goto done; } - rate = link[0] * 27000 * (link[1] & DPCD_LC01_LANE_COUNT_SET); - if (rate < ((datarate / 8) * 10)) { + linkrate = link[0] * 27000 * (link[1] & DPCD_LC01_LANE_COUNT_SET); + linkrate = (linkrate * 8) / 10; /* 8B/10B coding overhead */ + datarate = (datarate + 9) / 10; /* -> decakilobits */ + if (linkrate < datarate) { DBG("link not trained at sufficient rate\n"); goto done; } -- cgit v1.2.3-70-g09d2 From 7fac49337175f031d679f7ce0dab980ed6711237 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 3 Jul 2014 08:53:50 +1000 Subject: drm/nouveau/dp: workaround broken display The display in fdo#76483 pulses the hotplug line for link retraining after we cut power to the main link on the source, even while it's in D3. fdo#76483 Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c index e1832778e8b..7a1ebdfa9e1 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c @@ -87,6 +87,7 @@ nv50_sor_mthd(struct nouveau_object *object, u32 mthd, void *args, u32 size) struct nvkm_output_dp *outpdp = (void *)outp; switch (data) { case NV94_DISP_SOR_DP_PWR_STATE_OFF: + nouveau_event_put(outpdp->irq); ((struct nvkm_output_dp_impl *)nv_oclass(outp)) ->lnk_pwr(outpdp, 0); atomic_set(&outpdp->lt.done, 0); -- cgit v1.2.3-70-g09d2 From 0b4e8e7fd506d4ddb96f71230252d14066ce1597 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 8 Jul 2014 10:50:36 +1000 Subject: drm/nouveau/ram: fix test for gpio presence Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h b/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h index 04e38492e74..2af9cfd2c60 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h @@ -107,7 +107,7 @@ ramfuc_nsec(struct ramfuc *ram, u32 nsec) #define ram_init(s,p) ramfuc_init(&(s)->base, (p)) #define ram_exec(s,e) ramfuc_exec(&(s)->base, (e)) -#define ram_have(s,r) ((s)->r_##r.addr != 0x000000) +#define ram_have(s,r) ((s)->r_##r.addr[0] != 0x000000) #define ram_rd32(s,r) ramfuc_rd32(&(s)->base, &(s)->r_##r) #define ram_wr32(s,r,d) ramfuc_wr32(&(s)->base, &(s)->r_##r, (d)) #define ram_nuke(s,r) ramfuc_nuke(&(s)->base, &(s)->r_##r) -- cgit v1.2.3-70-g09d2 From 63288b721a80fb58c00cd47e61a90bc8b33ba588 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 7 Jul 2014 10:53:51 +0800 Subject: ARM: imx: fix shared gate clock Let's say clock A and B are two gate clocks that share the same register bit in hardware. Therefore they are registered as shared gate clocks with imx_clk_gate2_shared(). In a scenario that only clock A is enabled by clk_enable(A) while B is not used, the shared gate will be unexpectedly disabled in hardware. It happens because clk_enable(A) increments the share_count from 0 to 1, while clock B is unused to clock core, and therefore the core function will just disable B by calling clk->ops->disable() directly. The consequence of that call is share_count is decremented to 0 and the gate is disabled in hardware, even though clock A is still in use. The patch fixes the issue by initializing the share_count per hardware state and returns enable state per share_count from .is_enabled() hook, in case it's a shared gate. While at it, add a check in clk_gate2_disable() to ensure it's never called with a zero share_count. Reported-by: Fabio Estevam Fixes: f9f28cdf2167 ("ARM: imx: add shared gate clock support") Signed-off-by: Shawn Guo Tested-by: Fabio Estevam Signed-off-by: Olof Johansson --- arch/arm/mach-imx/clk-gate2.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 4ba587da89d..84acdfd1d71 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw) spin_lock_irqsave(gate->lock, flags); - if (gate->share_count && --(*gate->share_count) > 0) - goto out; + if (gate->share_count) { + if (WARN_ON(*gate->share_count == 0)) + goto out; + else if (--(*gate->share_count) > 0) + goto out; + } reg = readl(gate->reg); reg &= ~(3 << gate->bit_idx); @@ -78,19 +82,26 @@ out: spin_unlock_irqrestore(gate->lock, flags); } -static int clk_gate2_is_enabled(struct clk_hw *hw) +static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx) { - u32 reg; - struct clk_gate2 *gate = to_clk_gate2(hw); + u32 val = readl(reg); - reg = readl(gate->reg); - - if (((reg >> gate->bit_idx) & 1) == 1) + if (((val >> bit_idx) & 1) == 1) return 1; return 0; } +static int clk_gate2_is_enabled(struct clk_hw *hw) +{ + struct clk_gate2 *gate = to_clk_gate2(hw); + + if (gate->share_count) + return !!(*gate->share_count); + else + return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); +} + static struct clk_ops clk_gate2_ops = { .enable = clk_gate2_enable, .disable = clk_gate2_disable, @@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, gate->bit_idx = bit_idx; gate->flags = clk_gate2_flags; gate->lock = lock; + + /* Initialize share_count per hardware state */ + if (share_count) + *share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0; gate->share_count = share_count; init.name = name; -- cgit v1.2.3-70-g09d2 From 1d29a0722f6c38f79785c9ffb911730598de84e2 Mon Sep 17 00:00:00 2001 From: Jyri Sarha Date: Thu, 26 Jun 2014 22:20:52 +0300 Subject: ARM: OMAP2+: Remove non working OMAP HDMI audio initialization This code is not working currently and it can be removed. There is a conflict in sharing resources with the actual HDMI driver and with the ASoC HDMI audio DAI driver. Signed-off-by: Jyri Sarha Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 28 ---------------------------- 1 file changed, 28 deletions(-) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 592ba0a0ecf..b6f8f348296 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -297,33 +297,6 @@ static void omap_init_audio(void) static inline void omap_init_audio(void) {} #endif -#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \ - defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE) - -static struct platform_device omap_hdmi_audio = { - .name = "omap-hdmi-audio", - .id = -1, -}; - -static void __init omap_init_hdmi_audio(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - - oh = omap_hwmod_lookup("dss_hdmi"); - if (!oh) - return; - - pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0); - WARN(IS_ERR(pdev), - "Can't build omap_device for omap-hdmi-audio-dai.\n"); - - platform_device_register(&omap_hdmi_audio); -} -#else -static inline void omap_init_hdmi_audio(void) {} -#endif - #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include @@ -459,7 +432,6 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_camera(); - omap_init_hdmi_audio(); omap_init_mbox(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { -- cgit v1.2.3-70-g09d2 From 39e0ee9964b1245b79ec89f6b89d8ec4ef672524 Mon Sep 17 00:00:00 2001 From: Suman Tripathi Date: Mon, 7 Jul 2014 22:33:04 +0530 Subject: libahci: export ahci_qc_issue() and ahci_start_fix_rx() The subsequent patch will make use of them. Signed-off-by: Loc Ho Signed-off-by: Suman Tripathi Signed-off-by: Tejun Heo --- drivers/ata/ahci.h | 2 ++ drivers/ata/libahci.c | 7 ++++--- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 05882e4445a..5513296e5e2 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -371,7 +371,9 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class, int pmp, unsigned long deadline, int (*check_ready)(struct ata_link *link)); +unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); int ahci_stop_engine(struct ata_port *ap); +void ahci_start_fis_rx(struct ata_port *ap); void ahci_start_engine(struct ata_port *ap); int ahci_check_ready(struct ata_link *link); int ahci_kick_engine(struct ata_port *ap); diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 40ea583d361..d72ce047030 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -68,7 +68,6 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); -static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc); static int ahci_port_start(struct ata_port *ap); static void ahci_port_stop(struct ata_port *ap); @@ -620,7 +619,7 @@ int ahci_stop_engine(struct ata_port *ap) } EXPORT_SYMBOL_GPL(ahci_stop_engine); -static void ahci_start_fis_rx(struct ata_port *ap) +void ahci_start_fis_rx(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); struct ahci_host_priv *hpriv = ap->host->private_data; @@ -646,6 +645,7 @@ static void ahci_start_fis_rx(struct ata_port *ap) /* flush */ readl(port_mmio + PORT_CMD); } +EXPORT_SYMBOL_GPL(ahci_start_fis_rx); static int ahci_stop_fis_rx(struct ata_port *ap) { @@ -1945,7 +1945,7 @@ irqreturn_t ahci_interrupt(int irq, void *dev_instance) } EXPORT_SYMBOL_GPL(ahci_interrupt); -static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) +unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; void __iomem *port_mmio = ahci_port_base(ap); @@ -1974,6 +1974,7 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) return 0; } +EXPORT_SYMBOL_GPL(ahci_qc_issue); static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc) { -- cgit v1.2.3-70-g09d2 From 2a0bdff6b958d1b2523d2754b6cd5e0ea4053016 Mon Sep 17 00:00:00 2001 From: Suman Tripathi Date: Mon, 7 Jul 2014 22:33:05 +0530 Subject: ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command. This patch fixes the dma state machine lockup due to the processing of IDENTIFY DEVICE PIO mode command. The X-Gene AHCI controller has an errata in which it cannot clear the BSY bit after the PIO setup FIS. The dma state machine enters CMFatalErrorUpdate state and locks up. This patch also removes the dma restart workaround from the read_id function as the read_id function is only called by libata layer for ATA_INTERNAL commands. But for some cases eg: PORT MULTIPLIER and udev, the framework will enumerate using SCSI commands and it will not call read_id function. Signed-off-by: Loc Ho Signed-off-by: Suman Tripathi Signed-off-by: Tejun Heo --- drivers/ata/ahci_xgene.c | 60 +++++++++++++++++++++++++++++++++++++----------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c index 042a9bb45c8..ee3a3659bd9 100644 --- a/drivers/ata/ahci_xgene.c +++ b/drivers/ata/ahci_xgene.c @@ -78,6 +78,7 @@ struct xgene_ahci_context { struct ahci_host_priv *hpriv; struct device *dev; + u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/ void __iomem *csr_core; /* Core CSR address of IP */ void __iomem *csr_diag; /* Diag CSR address of IP */ void __iomem *csr_axi; /* AXI CSR address of IP */ @@ -97,6 +98,50 @@ static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) return 0; } +/** + * xgene_ahci_restart_engine - Restart the dma engine. + * @ap : ATA port of interest + * + * Restarts the dma engine inside the controller. + */ +static int xgene_ahci_restart_engine(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + + ahci_stop_engine(ap); + ahci_start_fis_rx(ap); + hpriv->start_engine(ap); + + return 0; +} + +/** + * xgene_ahci_qc_issue - Issue commands to the device + * @qc: Command to issue + * + * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot + * clear the BSY bit after receiving the PIO setup FIS. This results in the dma + * state machine goes into the CMFatalErrorUpdate state and locks up. By + * restarting the dma engine, it removes the controller out of lock up state. + */ +static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct xgene_ahci_context *ctx = hpriv->plat_data; + int rc = 0; + + if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA)) + xgene_ahci_restart_engine(ap); + + rc = ahci_qc_issue(qc); + + /* Save the last command issued */ + ctx->last_cmd[ap->port_no] = qc->tf.command; + + return rc; +} + /** * xgene_ahci_read_id - Read ID data from the specified device * @dev: device @@ -104,14 +149,12 @@ static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) * @id: data buffer * * This custom read ID function is required due to the fact that the HW - * does not support DEVSLP and the controller state machine may get stuck - * after processing the ID query command. + * does not support DEVSLP. */ static unsigned int xgene_ahci_read_id(struct ata_device *dev, struct ata_taskfile *tf, u16 *id) { u32 err_mask; - void __iomem *port_mmio = ahci_port_base(dev->link->ap); err_mask = ata_do_dev_read_id(dev, tf, id); if (err_mask) @@ -133,16 +176,6 @@ static unsigned int xgene_ahci_read_id(struct ata_device *dev, */ id[ATA_ID_FEATURE_SUPP] &= ~(1 << 8); - /* - * Due to HW errata, restart the port if no other command active. - * Otherwise the controller may get stuck. - */ - if (!readl(port_mmio + PORT_CMD_ISSUE)) { - writel(PORT_CMD_FIS_RX, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* Force a barrier */ - writel(PORT_CMD_FIS_RX | PORT_CMD_START, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* Force a barrier */ - } return 0; } @@ -300,6 +333,7 @@ static struct ata_port_operations xgene_ahci_ops = { .host_stop = xgene_ahci_host_stop, .hardreset = xgene_ahci_hardreset, .read_id = xgene_ahci_read_id, + .qc_issue = xgene_ahci_qc_issue, }; static const struct ata_port_info xgene_ahci_port_info = { -- cgit v1.2.3-70-g09d2 From bec7cedc8a92bfe96d32febe72634b30c63896bd Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Tue, 17 Jun 2014 18:14:26 +0100 Subject: arm64: export __cpu_{clear,copy}_user_page functions The __cpu_clear_user_page() and __cpu_copy_user_page() functions are not currently exported. This prevents modules from using clear_user_page() and copy_user_page(). Signed-off-by: Mark Salter Signed-off-by: Catalin Marinas --- arch/arm64/mm/copypage.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/mm/copypage.c b/arch/arm64/mm/copypage.c index 9aecbace412..13bbc3be6f5 100644 --- a/arch/arm64/mm/copypage.c +++ b/arch/arm64/mm/copypage.c @@ -27,8 +27,10 @@ void __cpu_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) copy_page(kto, kfrom); __flush_dcache_area(kto, PAGE_SIZE); } +EXPORT_SYMBOL_GPL(__cpu_copy_user_page); void __cpu_clear_user_page(void *kaddr, unsigned long vaddr) { clear_page(kaddr); } +EXPORT_SYMBOL_GPL(__cpu_clear_user_page); -- cgit v1.2.3-70-g09d2 From fa2ec3ea10bd377f9d55772b1dab65178425a1a2 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 18 Jun 2014 21:10:09 +0100 Subject: arm64: implement TASK_SIZE_OF include/linux/sched.h implements TASK_SIZE_OF as TASK_SIZE if it is not set by the architecture headers. TASK_SIZE uses the current task to determine the size of the virtual address space. On a 64-bit kernel this will cause reading /proc/pid/pagemap of a 64-bit process from a 32-bit process to return EOF when it reads past 0xffffffff. Implement TASK_SIZE_OF exactly the same as TASK_SIZE with test_tsk_thread_flag instead of test_thread_flag. Cc: stable@vger.kernel.org Signed-off-by: Colin Cross Acked-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/memory.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index 993bce527b8..902eb708804 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -56,6 +56,8 @@ #define TASK_SIZE_32 UL(0x100000000) #define TASK_SIZE (test_thread_flag(TIF_32BIT) ? \ TASK_SIZE_32 : TASK_SIZE_64) +#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \ + TASK_SIZE_32 : TASK_SIZE_64) #else #define TASK_SIZE TASK_SIZE_64 #endif /* CONFIG_COMPAT */ -- cgit v1.2.3-70-g09d2 From baa3c65298c089a9014b4e523a14ec2885cca1bc Mon Sep 17 00:00:00 2001 From: Jan Kardell Date: Thu, 6 Nov 2014 22:18:00 +0000 Subject: iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends Since AI lines could be selected at will (linux-3.11) the sending and receiving ends of the FIFO does not agree about what step is used for a line. It only works if the last lines are used, like 5,6,7, and fails if ie 2,4,6 is selected in DT. Signed-off-by: Jan Kardell Tested-by: Zubair Lutfullah Signed-off-by: Jonathan Cameron Cc: stable@vger.kernel.org --- drivers/iio/adc/ti_am335x_adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index a4db3026bec..d5dc4c6ce86 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -374,7 +374,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, return -EAGAIN; } } - map_val = chan->channel + TOTAL_CHANNELS; + map_val = adc_dev->channel_step[chan->scan_index]; /* * We check the complete FIFO. We programmed just one entry but in case -- cgit v1.2.3-70-g09d2 From 5a90af67c2126fe1d04ebccc1f8177e6ca70d3a9 Mon Sep 17 00:00:00 2001 From: Prabhakar Lad Date: Tue, 8 Jul 2014 16:25:38 +0100 Subject: cpufreq: Makefile: fix compilation for davinci platform Since commtit 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) this added dependancy only for CONFIG_ARCH_DAVINCI_DA850 where as davinci_cpufreq_init() call is used by all davinci platform. This patch fixes following build error: arch/arm/mach-davinci/built-in.o: In function `davinci_init_late': :(.init.text+0x928): undefined reference to `davinci_cpufreq_init' make: *** [vmlinux] Error 1 Fixes: 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) Signed-off-by: Lad, Prabhakar Acked-by: Viresh Kumar Cc: 3.10+ # 3.10+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 738c8b7b17d..db6d9a2fea4 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -49,7 +49,7 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o # LITTLE drivers, so that it is probed last. obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o -obj-$(CONFIG_ARCH_DAVINCI_DA850) += davinci-cpufreq.o +obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o -- cgit v1.2.3-70-g09d2 From 9c72cc6f00d24711ef585772396dd1ae180881a6 Mon Sep 17 00:00:00 2001 From: Scot Doyle Date: Thu, 3 Jul 2014 23:27:50 +0000 Subject: drm/i915: quirk asserts controllable backlight presence, overriding VBT commit c675949ec58ca50d5a3ae3c757892f1560f6e896 Author: Jani Nikula Date: Wed Apr 9 11:31:37 2014 +0300 drm/i915: do not setup backlight if not available according to VBT caused a regression on machines with a misconfigured VBT. Add a quirk to assert the presence of a controllable backlight. Use it to ignore the VBT backlight presence check during backlight setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Tested-by: James Duley Tested-by: Michael Mullin Reviewed-by: Jani Nikula Signed-off-by: Scot Doyle Signed-off-by: Jani Nikula Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_display.c | 8 ++++++++ drivers/gpu/drm/i915/intel_panel.c | 8 ++++++-- 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index a47fbf60b78..374f964323a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -656,6 +656,7 @@ enum intel_sbi_destination { #define QUIRK_PIPEA_FORCE (1<<0) #define QUIRK_LVDS_SSC_DISABLE (1<<1) #define QUIRK_INVERT_BRIGHTNESS (1<<2) +#define QUIRK_BACKLIGHT_PRESENT (1<<3) struct intel_fbdev; struct intel_fbc_work; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 556c916dbf9..949c765037e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11591,6 +11591,14 @@ static void quirk_invert_brightness(struct drm_device *dev) DRM_INFO("applying inverted panel brightness quirk\n"); } +/* Some VBT's incorrectly indicate no backlight is present */ +static void quirk_backlight_present(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + dev_priv->quirks |= QUIRK_BACKLIGHT_PRESENT; + DRM_INFO("applying backlight present quirk\n"); +} + struct intel_quirk { int device; int subsystem_vendor; diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 38a98570d10..628cd893827 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -1118,8 +1118,12 @@ int intel_panel_setup_backlight(struct drm_connector *connector) int ret; if (!dev_priv->vbt.backlight.present) { - DRM_DEBUG_KMS("native backlight control not available per VBT\n"); - return 0; + if (dev_priv->quirks & QUIRK_BACKLIGHT_PRESENT) { + DRM_DEBUG_KMS("no backlight present per VBT, but present per quirk\n"); + } else { + DRM_DEBUG_KMS("no backlight present per VBT\n"); + return 0; + } } /* set level and max in panel struct */ -- cgit v1.2.3-70-g09d2 From 2e93a1aa9ca455aa3ad0294bcd6d66f38bf8b758 Mon Sep 17 00:00:00 2001 From: Scot Doyle Date: Thu, 3 Jul 2014 23:27:51 +0000 Subject: drm/i915: Acer C720 and C720P have controllable backlights The Acer C720 and C720P Chromebooks (with Celeron 2955U CPU) have a controllable backlight although their VBT reports otherwise. Apply quirk to ignore the backlight presence check during backlight setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Tested-by: James Duley Tested-by: Michael Mullin Signed-off-by: Scot Doyle CC: Jani Nikula Signed-off-by: Jani Nikula Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 949c765037e..2ee81656f80 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11667,6 +11667,9 @@ static struct intel_quirk intel_quirks[] = { /* Acer Aspire 5336 */ { 0x2a42, 0x1025, 0x048a, quirk_invert_brightness }, + + /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */ + { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present }, }; static void intel_init_quirks(struct drm_device *dev) -- cgit v1.2.3-70-g09d2 From d4967d8c6d4f52623f2be8eaff0b445dc5863c92 Mon Sep 17 00:00:00 2001 From: Scot Doyle Date: Thu, 3 Jul 2014 23:27:52 +0000 Subject: drm/i915: Toshiba CB35 has a controllable backlight The Toshiba CB35 Chromebook (with Celeron 2955U CPU) has a controllable backlight although its VBT reports otherwise. Apply quirk to ignore the backlight presence check during backlight setup. Patch tested by author on Toshiba CB35. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Signed-off-by: Scot Doyle CC: Jani Nikula Signed-off-by: Jani Nikula Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2ee81656f80..e27e7804c0b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11670,6 +11670,9 @@ static struct intel_quirk intel_quirks[] = { /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */ { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present }, + + /* Toshiba CB35 Chromebook (Celeron 2955U) */ + { 0x0a06, 0x1179, 0x0a88, quirk_backlight_present }, }; static void intel_init_quirks(struct drm_device *dev) -- cgit v1.2.3-70-g09d2 From a799a9780eb5c874d9d7ca0bbee66401ca98c013 Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Thu, 3 Jul 2014 16:35:40 +0530 Subject: drm/i915/vlv: DPI FIFO empty check is not needed While sending DPI SHUTDOWN command, we cannot wait for FIFO empty as pipes are not disabled at that time. In case of MIPI we disable port first and send SHUTDOWN command while pipe is still running and FIFOs will not be empty, causing spurious error log Signed-off-by: Shobhit Kumar Tested-by: Chris Wilson Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dsi_cmd.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dsi_cmd.c b/drivers/gpu/drm/i915/intel_dsi_cmd.c index 3eeb21b9fdd..933c8630523 100644 --- a/drivers/gpu/drm/i915/intel_dsi_cmd.c +++ b/drivers/gpu/drm/i915/intel_dsi_cmd.c @@ -404,12 +404,6 @@ int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs) else cmd |= DPI_LP_MODE; - /* DPI virtual channel?! */ - - mask = DPI_FIFO_EMPTY; - if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(pipe)) & mask) == mask, 50)) - DRM_ERROR("Timeout waiting for DPI FIFO empty.\n"); - /* clear bit */ I915_WRITE(MIPI_INTR_STAT(pipe), SPL_PKT_SENT_INTERRUPT); -- cgit v1.2.3-70-g09d2 From aceb365ca9a51fb604313c08ed3061d6cc643237 Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Thu, 3 Jul 2014 16:35:41 +0530 Subject: drm/i915/vlv: Update the DSI ULPS entry/exit sequence We should keep DEVICE_READY bit set in the ULPS enter sequence. In exit sequence also we should set DEVICE_READY, but thats causing blankout for me. Also exit sequence is simplified as per hw team recommendation. This should fix - [drm:intel_dsi_clear_device_ready] *ERROR* DSI LP not going Low Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80818 Signed-off-by: Shobhit Kumar Tested-by: Chris Wilson Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dsi.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 02f99d768d4..3fd082933c8 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -117,17 +117,18 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) /* bandgap reset is needed after everytime we do power gate */ band_gap_reset(dev_priv); + I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + usleep_range(2500, 3000); + val = I915_READ(MIPI_PORT_CTRL(pipe)); I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD); usleep_range(1000, 1500); - I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT); - usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); - usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00); - usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT); + usleep_range(2500, 3000); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); - usleep_range(2000, 2500); + usleep_range(2500, 3000); } static void intel_dsi_enable(struct intel_encoder *encoder) @@ -271,23 +272,23 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) DRM_DEBUG_KMS("\n"); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER); usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT); usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER); usleep_range(2000, 2500); - val = I915_READ(MIPI_PORT_CTRL(pipe)); - I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD); - usleep_range(1000, 1500); - if (wait_for(((I915_READ(MIPI_PORT_CTRL(pipe)) & AFE_LATCHOUT) == 0x00000), 30)) DRM_ERROR("DSI LP not going Low\n"); + val = I915_READ(MIPI_PORT_CTRL(pipe)); + I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD); + usleep_range(1000, 1500); + I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00); usleep_range(2000, 2500); -- cgit v1.2.3-70-g09d2 From f1e1c2129b79cfdaf07bca37c5a10569fe021abe Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 5 Jun 2014 20:02:59 +0300 Subject: drm/i915: Don't clobber the GTT when it's within stolen memory MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On most gen2-4 platforms the GTT can be (or maybe always is?) inside the stolen memory region. If that's the case, reduce the size of the stolen memory appropriately to make make sure we don't clobber the GTT. v2: Deal with gen4 36 bit physical address Signed-off-by: Ville Syrjälä Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80151 Acked-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_stolen.c | 44 ++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_reg.h | 3 +++ 2 files changed, 47 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c index 62ef55ba061..7465ab0fd39 100644 --- a/drivers/gpu/drm/i915/i915_gem_stolen.c +++ b/drivers/gpu/drm/i915/i915_gem_stolen.c @@ -74,6 +74,50 @@ static unsigned long i915_stolen_to_physical(struct drm_device *dev) if (base == 0) return 0; + /* make sure we don't clobber the GTT if it's within stolen memory */ + if (INTEL_INFO(dev)->gen <= 4 && !IS_G33(dev) && !IS_G4X(dev)) { + struct { + u32 start, end; + } stolen[2] = { + { .start = base, .end = base + dev_priv->gtt.stolen_size, }, + { .start = base, .end = base + dev_priv->gtt.stolen_size, }, + }; + u64 gtt_start, gtt_end; + + gtt_start = I915_READ(PGTBL_CTL); + if (IS_GEN4(dev)) + gtt_start = (gtt_start & PGTBL_ADDRESS_LO_MASK) | + (gtt_start & PGTBL_ADDRESS_HI_MASK) << 28; + else + gtt_start &= PGTBL_ADDRESS_LO_MASK; + gtt_end = gtt_start + gtt_total_entries(dev_priv->gtt) * 4; + + if (gtt_start >= stolen[0].start && gtt_start < stolen[0].end) + stolen[0].end = gtt_start; + if (gtt_end > stolen[1].start && gtt_end <= stolen[1].end) + stolen[1].start = gtt_end; + + /* pick the larger of the two chunks */ + if (stolen[0].end - stolen[0].start > + stolen[1].end - stolen[1].start) { + base = stolen[0].start; + dev_priv->gtt.stolen_size = stolen[0].end - stolen[0].start; + } else { + base = stolen[1].start; + dev_priv->gtt.stolen_size = stolen[1].end - stolen[1].start; + } + + if (stolen[0].start != stolen[1].start || + stolen[0].end != stolen[1].end) { + DRM_DEBUG_KMS("GTT within stolen memory at 0x%llx-0x%llx\n", + (unsigned long long) gtt_start, + (unsigned long long) gtt_end - 1); + DRM_DEBUG_KMS("Stolen memory adjusted to 0x%x-0x%x\n", + base, base + (u32) dev_priv->gtt.stolen_size - 1); + } + } + + /* Verify that nothing else uses this physical address. Stolen * memory should be reserved by the BIOS and hidden from the * kernel. So if the region is already marked as busy, something diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index e691b30b281..a5bab61bfc0 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -942,6 +942,9 @@ enum punit_power_well { /* * Instruction and interrupt control regs */ +#define PGTBL_CTL 0x02020 +#define PGTBL_ADDRESS_LO_MASK 0xfffff000 /* bits [31:12] */ +#define PGTBL_ADDRESS_HI_MASK 0x000000f0 /* bits [35:32] (gen4) */ #define PGTBL_ER 0x02024 #define RENDER_RING_BASE 0x02000 #define BSD_RING_BASE 0x04000 -- cgit v1.2.3-70-g09d2 From 1bb9e632a0aeee1121e652ee4dc80e5e6f14bcd2 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 8 Jul 2014 10:02:43 +0200 Subject: drm/i915: Only unbind vgacon, not other console drivers The console subsystem only provides a function to switch to a given console, but we want to actually only switach away from vgacon. Unconditionally switching to the dummy console resulted in switching away from fbcon in multi-gpu setups when other gpu drivers are loaded before i915. Then either the reinitialization of fbcon when i915 registers its fbdev emulation or the teardown of the fbcon driver killed the machine. So only switch to the dummy console when it's required. Kudos to Chris for the original idea, I've only refined it a bit to still unregister vgacon even when it's currently unused. This regression has been introduced in commit a4de05268e674e8ed31df6348269e22d6c6a1803 Author: Daniel Vetter Date: Thu Jun 5 16:20:46 2014 +0200 drm/i915: Kick out vga console Reported-and-tested-by: Ed Tomlinson Cc: Chris Wilson Cc: David Herrmann Reviewed-by: Chris Wilson Reviewed-by: David Herrmann Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_dma.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 6c656392d67..d4434414062 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1464,12 +1464,13 @@ static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv) #else static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv) { - int ret; + int ret = 0; DRM_INFO("Replacing VGA console driver\n"); console_lock(); - ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1); + if (con_is_bound(&vga_con)) + ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1); if (ret == 0) { ret = do_unregister_con_driver(&vga_con); -- cgit v1.2.3-70-g09d2 From 01527b3127997ef6370d5ad4fa25d96847fbf12a Mon Sep 17 00:00:00 2001 From: Clint Taylor Date: Mon, 7 Jul 2014 13:01:46 -0700 Subject: drm/i915/vlv: T12 eDP panel timing enforcement during reboot The panel power sequencer on vlv doesn't appear to accept changes to its T12 power down duration during warm reboots. This change forces a delay for warm reboots to the T12 panel timing as defined in the VBT table for the connected panel. Ver2: removed redundant pr_crit(), commented magic value for pp_div_reg Ver3: moved SYS_RESTART check earlier, new name for pp_div. Ver4: Minor issue changes Ver5: Move registration of reboot notifier to edp_connector_init, Added warning comment to handler about lack of PM notification. Signed-off-by: Clint Taylor Reviewed-by: Paulo Zanoni Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 42 ++++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 2 ++ 2 files changed, 44 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 52fda950fd2..075170d1844 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -28,6 +28,8 @@ #include #include #include +#include +#include #include #include #include @@ -336,6 +338,37 @@ static u32 _pp_stat_reg(struct intel_dp *intel_dp) return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp)); } +/* Reboot notifier handler to shutdown panel power to guarantee T12 timing + This function only applicable when panel PM state is not to be tracked */ +static int edp_notify_handler(struct notifier_block *this, unsigned long code, + void *unused) +{ + struct intel_dp *intel_dp = container_of(this, typeof(* intel_dp), + edp_notifier); + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_div; + u32 pp_ctrl_reg, pp_div_reg; + enum pipe pipe = vlv_power_sequencer_pipe(intel_dp); + + if (!is_edp(intel_dp) || code != SYS_RESTART) + return 0; + + if (IS_VALLEYVIEW(dev)) { + pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe); + pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe); + pp_div = I915_READ(pp_div_reg); + pp_div &= PP_REFERENCE_DIVIDER_MASK; + + /* 0x1F write to PP_DIV_REG sets max cycle delay */ + I915_WRITE(pp_div_reg, pp_div | 0x1F); + I915_WRITE(pp_ctrl_reg, PANEL_UNLOCK_REGS | PANEL_POWER_OFF); + msleep(intel_dp->panel_power_cycle_delay); + } + + return 0; +} + static bool edp_have_panel_power(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); @@ -3707,6 +3740,10 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder) drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); edp_panel_vdd_off_sync(intel_dp); drm_modeset_unlock(&dev->mode_config.connection_mutex); + if (intel_dp->edp_notifier.notifier_call) { + unregister_reboot_notifier(&intel_dp->edp_notifier); + intel_dp->edp_notifier.notifier_call = NULL; + } } kfree(intel_dig_port); } @@ -4184,6 +4221,11 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, } mutex_unlock(&dev->mode_config.mutex); + if (IS_VALLEYVIEW(dev)) { + intel_dp->edp_notifier.notifier_call = edp_notify_handler; + register_reboot_notifier(&intel_dp->edp_notifier); + } + intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); intel_panel_setup_backlight(connector); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index eaa27ee9e36..f67340ed2c1 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -538,6 +538,8 @@ struct intel_dp { unsigned long last_power_on; unsigned long last_backlight_off; bool psr_setup_done; + struct notifier_block edp_notifier; + bool use_tps3; struct intel_connector *attached_connector; -- cgit v1.2.3-70-g09d2 From c128c776e0f45d3edaf44ab3fecfa5d1f7067c07 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 9 Jul 2014 14:31:04 +0200 Subject: ACPI / PNP: add soc_button_array device ID to PNP IDs list The soc_button_array PNP driver was introduced in 3.15. But in commit eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration), when reworking the PNPACPI device enumeration, we missed the soc_button_array device ID. This results in a regression in 3.16-rc1 that soc_button_array pnp device fails to be enumerated. Fix the problem by adding soc_button_array device ID into the acpi_pnp scan handler's ID list. Fixes: eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration) Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_pnp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/acpi/acpi_pnp.c b/drivers/acpi/acpi_pnp.c index 6703c1fd993..4ddb0dca56f 100644 --- a/drivers/acpi/acpi_pnp.c +++ b/drivers/acpi/acpi_pnp.c @@ -14,6 +14,8 @@ #include static const struct acpi_device_id acpi_pnp_device_ids[] = { + /* soc_button_array */ + {"PNP0C40"}, /* pata_isapnp */ {"PNP0600"}, /* Generic ESDI/IDE/ATA compatible hard disk controller */ /* floppy */ -- cgit v1.2.3-70-g09d2 From 8bc6f60e3f7f31c4ce370b4b27b8f4b355b7f07e Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Wed, 11 Jun 2014 18:32:23 +0800 Subject: f2fs: remove unused variables in f2fs_sm_info Remove unused variables in struct f2fs_sm_info. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim --- fs/f2fs/f2fs.h | 3 --- fs/f2fs/segment.c | 2 -- 2 files changed, 5 deletions(-) diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index e51c732b0dd..7ef7acdb935 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -342,9 +342,6 @@ struct f2fs_sm_info { struct dirty_seglist_info *dirty_info; /* dirty segment information */ struct curseg_info *curseg_array; /* active segment information */ - struct list_head wblist_head; /* list of under-writeback pages */ - spinlock_t wblist_lock; /* lock for checkpoint */ - block_t seg0_blkaddr; /* block address of 0'th segment */ block_t main_blkaddr; /* start block address of main area */ block_t ssa_blkaddr; /* start block address of SSA area */ diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c index f25f0e07e26..b22d5a0652b 100644 --- a/fs/f2fs/segment.c +++ b/fs/f2fs/segment.c @@ -1885,8 +1885,6 @@ int build_segment_manager(struct f2fs_sb_info *sbi) /* init sm info */ sbi->sm_info = sm_info; - INIT_LIST_HEAD(&sm_info->wblist_head); - spin_lock_init(&sm_info->wblist_lock); sm_info->seg0_blkaddr = le32_to_cpu(raw_super->segment0_blkaddr); sm_info->main_blkaddr = le32_to_cpu(raw_super->main_blkaddr); sm_info->segment_count = le32_to_cpu(raw_super->segment_count); -- cgit v1.2.3-70-g09d2 From d6b7d4b31dfd5a454a71c445b8086bc098237334 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Thu, 12 Jun 2014 13:23:41 +0800 Subject: f2fs: check lower bound nid value in check_nid_range This patch add lower bound verification for nid in check_nid_range, so nids reserved like 0, node, meta passed by caller could be checked there. And then check_nid_range could be used in f2fs_nfs_get_inode for simplifying code. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim --- fs/f2fs/f2fs.h | 3 ++- fs/f2fs/inode.c | 1 + fs/f2fs/super.c | 4 +--- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 7ef7acdb935..58df97e174d 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -641,7 +641,8 @@ static inline void f2fs_unlock_all(struct f2fs_sb_info *sbi) */ static inline int check_nid_range(struct f2fs_sb_info *sbi, nid_t nid) { - WARN_ON((nid >= NM_I(sbi)->max_nid)); + if (unlikely(nid < F2FS_ROOT_INO(sbi))) + return -EINVAL; if (unlikely(nid >= NM_I(sbi)->max_nid)) return -EINVAL; return 0; diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c index adc622c6bdc..2cf6962f6cc 100644 --- a/fs/f2fs/inode.c +++ b/fs/f2fs/inode.c @@ -78,6 +78,7 @@ static int do_read_inode(struct inode *inode) if (check_nid_range(sbi, inode->i_ino)) { f2fs_msg(inode->i_sb, KERN_ERR, "bad inode number: %lu", (unsigned long) inode->i_ino); + WARN_ON(1); return -EINVAL; } diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index b2b18637cb9..8f96d9372ad 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -689,9 +689,7 @@ static struct inode *f2fs_nfs_get_inode(struct super_block *sb, struct f2fs_sb_info *sbi = F2FS_SB(sb); struct inode *inode; - if (unlikely(ino < F2FS_ROOT_INO(sbi))) - return ERR_PTR(-ESTALE); - if (unlikely(ino >= NM_I(sbi)->max_nid)) + if (check_nid_range(sbi, ino)) return ERR_PTR(-ESTALE); /* -- cgit v1.2.3-70-g09d2 From 90d72459ccb47335a4348947506fd091e63f7cf8 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Tue, 24 Jun 2014 10:34:00 +0800 Subject: f2fs: fix error path in init_inode_metadata If we fail in this path: ->init_inode_metadata ->make_empty_dir ->get_new_data_page ->grab_cache_page return -ENOMEM We will bug on in error path of init_inode_metadata when call remove_inode_page because i_block = 2 (one inode block will be released later & one dentry block). We should release the dentry block in init_inode_metadata to avoid this BUG_ON, and avoid leak of dentry block resource, because we never have second chance to release that block in ->evict_inode as in upper error path we make this inode 'bad'. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim --- fs/f2fs/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c index 966acb039e3..a4addd72ebb 100644 --- a/fs/f2fs/dir.c +++ b/fs/f2fs/dir.c @@ -376,11 +376,11 @@ static struct page *init_inode_metadata(struct inode *inode, put_error: f2fs_put_page(page, 1); +error: /* once the failed inode becomes a bad inode, i_mode is S_IFREG */ truncate_inode_pages(&inode->i_data, 0); truncate_blocks(inode, 0); remove_dirty_dir_inode(inode); -error: remove_inode_page(inode); return ERR_PTR(err); } -- cgit v1.2.3-70-g09d2 From dd4d961fe7d1cb1cba6e9d8d132475d4917ba864 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Tue, 24 Jun 2014 14:13:13 +0800 Subject: f2fs: release new entry page correctly in error path of f2fs_rename This patch correct releasing code of new_page to avoid BUG_ON in error patch of f2fs_rename. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim --- fs/f2fs/namei.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c index 9138c32aa69..aa3ddb228f9 100644 --- a/fs/f2fs/namei.c +++ b/fs/f2fs/namei.c @@ -474,7 +474,8 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, return 0; put_out_dir: - f2fs_put_page(new_page, 1); + kunmap(new_page); + f2fs_put_page(new_page, 0); out_dir: if (old_dir_entry) { kunmap(old_dir_page); -- cgit v1.2.3-70-g09d2 From b2c0829912493df596706a1a036c67beb1bd6ff5 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Mon, 30 Jun 2014 18:09:55 +0900 Subject: f2fs: do checkpoint for the renamed inode If an inode is renamed, it should be registered as file_lost_pino to conduct checkpoint at f2fs_sync_file. Otherwise, the inode cannot be recovered due to no dent_mark in the following scenario. Note that, this scenario is from xfstests/322. 1. create "a" 2. fsync "a" 3. rename "a" to "b" 4. fsync "b" 5. Sudden power-cut After recovery is done, "b" should be seen. However, the result shows "a", since the recovery procedure does not enter recover_dentry due to no dent_mark. The reason is like below. - The nid of "a" is checkpointed during #2, f2fs_sync_file. - The inode page for "b" produced by #3 is written without dent_mark by sync_node_pages. So, this patch fixes this bug by assinging file_lost_pino to the "a"'s inode. If the pino is lost, f2fs_sync_file conducts checkpoint, and then recovers the latest pino and its dentry information for further recovery. Signed-off-by: Jaegeuk Kim --- fs/f2fs/namei.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c index aa3ddb228f9..a6bdddc33ce 100644 --- a/fs/f2fs/namei.c +++ b/fs/f2fs/namei.c @@ -417,9 +417,6 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, } f2fs_set_link(new_dir, new_entry, new_page, old_inode); - down_write(&F2FS_I(old_inode)->i_sem); - F2FS_I(old_inode)->i_pino = new_dir->i_ino; - up_write(&F2FS_I(old_inode)->i_sem); new_inode->i_ctime = CURRENT_TIME; down_write(&F2FS_I(new_inode)->i_sem); @@ -448,6 +445,10 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, } } + down_write(&F2FS_I(old_inode)->i_sem); + file_lost_pino(old_inode); + up_write(&F2FS_I(old_inode)->i_sem); + old_inode->i_ctime = CURRENT_TIME; mark_inode_dirty(old_inode); @@ -457,9 +458,6 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, if (old_dir != new_dir) { f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); - down_write(&F2FS_I(old_inode)->i_sem); - F2FS_I(old_inode)->i_pino = new_dir->i_ino; - up_write(&F2FS_I(old_inode)->i_sem); update_inode_page(old_inode); } else { kunmap(old_dir_page); -- cgit v1.2.3-70-g09d2 From 2743f865543c0c4a5e12fc13edb2bf89a6e9687c Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Sat, 28 Jun 2014 01:00:41 +0900 Subject: f2fs: check bdi->dirty_exceeded when trying to skip data writes If we don't check the current backing device status, balance_dirty_pages can fall into infinite pausing routine. This can be occurred when a lot of directories make a small number of dirty dentry pages including files. Reported-by: Brian Chadwick Signed-off-by: Jaegeuk Kim --- fs/f2fs/node.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c index 9dfb9a042fd..4b697ccc9b0 100644 --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -42,6 +42,8 @@ bool available_free_memory(struct f2fs_sb_info *sbi, int type) mem_size = (nm_i->nat_cnt * sizeof(struct nat_entry)) >> 12; res = mem_size < ((val.totalram * nm_i->ram_thresh / 100) >> 2); } else if (type == DIRTY_DENTS) { + if (sbi->sb->s_bdi->dirty_exceeded) + return false; mem_size = get_pages(sbi, F2FS_DIRTY_DENTS); res = mem_size < ((val.totalram * nm_i->ram_thresh / 100) >> 1); } -- cgit v1.2.3-70-g09d2 From 50e1f8d22199b557337b3d1ec8520e4c5aa5c76e Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Mon, 7 Jul 2014 09:39:32 +0800 Subject: f2fs: avoid to access NULL pointer in issue_flush_thread Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=75861 Denis 2014-05-10 11:28:59 UTC reported: "F2FS-fs (mmcblk0p28): mounting.. Unable to handle kernel NULL pointer dereference at virtual address 00000018 ... [] (_raw_spin_lock+0x3c/0x70) from [] (issue_flush_thread+0x50/0x17c) [] (issue_flush_thread+0x50/0x17c) from [] (kthread+0x98/0xa4) [] (kthread+0x98/0xa4) from [] (kernel_thread_exit+0x0/0x8)" This patch assign cmd_control_info in sm_info before issue_flush_thread is being created, so this make sure that issue flush thread will have no chance to access invalid info in fcc. Signed-off-by: Chao Yu Reviewed-by: Gu Zheng Signed-off-by: Jaegeuk Kim --- fs/f2fs/segment.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c index b22d5a0652b..d04613df710 100644 --- a/fs/f2fs/segment.c +++ b/fs/f2fs/segment.c @@ -272,14 +272,15 @@ int create_flush_cmd_control(struct f2fs_sb_info *sbi) return -ENOMEM; spin_lock_init(&fcc->issue_lock); init_waitqueue_head(&fcc->flush_wait_queue); + sbi->sm_info->cmd_control_info = fcc; fcc->f2fs_issue_flush = kthread_run(issue_flush_thread, sbi, "f2fs_flush-%u:%u", MAJOR(dev), MINOR(dev)); if (IS_ERR(fcc->f2fs_issue_flush)) { err = PTR_ERR(fcc->f2fs_issue_flush); kfree(fcc); + sbi->sm_info->cmd_control_info = NULL; return err; } - sbi->sm_info->cmd_control_info = fcc; return err; } -- cgit v1.2.3-70-g09d2 From dd5a6752ae7df4e0ba6ce3bcd0c3b4489bb3537f Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Tue, 8 Jul 2014 14:38:33 +0200 Subject: firmware: Create directories for external firmware Commit 5180d5f4 ("firmware: Simplify directory creation") broke including firmware specified in CONFIG_EXTRA_FIRMWARE: MK_FW firmware/amd-ucode/microcode_amd.bin.gen.S /bin/sh: firmware/amd-ucode/microcode_amd.bin.gen.S: No such file or directory ... firmware/Makefile:185: recipe for target 'firmware/amd-ucode/microcode_amd.bin.gen.S' failed It works with O= builds, because the directory is created by Makefile.build. Create the directory in firmware/Makefile in non-O builds. Reported-and-tested-by: Ronald Uitermark Reported-and-tested-by: Torsten Kaiser Signed-off-by: Michal Marek --- firmware/Makefile | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/firmware/Makefile b/firmware/Makefile index 5747417069c..0862d34cf7d 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -219,6 +219,12 @@ $(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) obj-y += $(patsubst %,%.gen.o, $(fw-external-y)) obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y)) +ifeq ($(KBUILD_SRC),) +# Makefile.build only creates subdirectories for O= builds, but external +# firmware might live outside the kernel source tree +_dummy := $(foreach d,$(addprefix $(obj)/,$(dir $(fw-external-y))), $(shell [ -d $(d) ] || mkdir -p $(d))) +endif + # Remove .S files and binaries created from ihex # (during 'make clean' .config isn't included so they're all in $(fw-shipped-)) targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \ -- cgit v1.2.3-70-g09d2 From affb1aff300ddee54df307812b38f166e8a865ef Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Mon, 7 Jul 2014 16:34:24 -0700 Subject: Drivers: hv: vmbus: Fix a bug in the channel callback dispatch code Starting with Win8, we have implemented several optimizations to improve the scalability and performance of the VMBUS transport between the Host and the Guest. Some of the non-performance critical services cannot leverage these optimization since they only read and process one message at a time. Make adjustments to the callback dispatch code to account for the way non-performance critical drivers handle reading of the channel. Signed-off-by: K. Y. Srinivasan Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/hv/connection.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c index e84f4526eb3..ae22e3c1fc4 100644 --- a/drivers/hv/connection.c +++ b/drivers/hv/connection.c @@ -339,9 +339,13 @@ static void process_chn_event(u32 relid) */ do { - hv_begin_read(&channel->inbound); + if (read_state) + hv_begin_read(&channel->inbound); channel->onchannel_callback(arg); - bytes_to_read = hv_end_read(&channel->inbound); + if (read_state) + bytes_to_read = hv_end_read(&channel->inbound); + else + bytes_to_read = 0; } while (read_state && (bytes_to_read != 0)); } else { pr_err("no channel callback for relid - %u\n", relid); -- cgit v1.2.3-70-g09d2 From 9bd2d0dfe4714dd5d7c09a93a5c9ea9e14ceb3fc Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Mon, 7 Jul 2014 16:34:25 -0700 Subject: Drivers: hv: util: Fix a bug in the KVP code Add code to poll the channel since we process only one message at a time and the host may not interrupt us. Also increase the receive buffer size since some KVP messages are close to 8K bytes in size. Signed-off-by: K. Y. Srinivasan Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_kvp.c | 17 ++++++++++++++--- drivers/hv/hv_util.c | 2 +- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c index ea852537307..521c14625b3 100644 --- a/drivers/hv/hv_kvp.c +++ b/drivers/hv/hv_kvp.c @@ -127,6 +127,17 @@ kvp_work_func(struct work_struct *dummy) kvp_respond_to_host(NULL, HV_E_FAIL); } +static void poll_channel(struct vmbus_channel *channel) +{ + if (channel->target_cpu != smp_processor_id()) + smp_call_function_single(channel->target_cpu, + hv_kvp_onchannelcallback, + channel, true); + else + hv_kvp_onchannelcallback(channel); +} + + static int kvp_handle_handshake(struct hv_kvp_msg *msg) { int ret = 1; @@ -155,7 +166,7 @@ static int kvp_handle_handshake(struct hv_kvp_msg *msg) kvp_register(dm_reg_value); kvp_transaction.active = false; if (kvp_transaction.kvp_context) - hv_kvp_onchannelcallback(kvp_transaction.kvp_context); + poll_channel(kvp_transaction.kvp_context); } return ret; } @@ -568,7 +579,7 @@ response_done: vmbus_sendpacket(channel, recv_buffer, buf_len, req_id, VM_PKT_DATA_INBAND, 0); - + poll_channel(channel); } /* @@ -603,7 +614,7 @@ void hv_kvp_onchannelcallback(void *context) return; } - vmbus_recvpacket(channel, recv_buffer, PAGE_SIZE * 2, &recvlen, + vmbus_recvpacket(channel, recv_buffer, PAGE_SIZE * 4, &recvlen, &requestid); if (recvlen > 0) { diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c index dd761806f0e..3b9c9ef0deb 100644 --- a/drivers/hv/hv_util.c +++ b/drivers/hv/hv_util.c @@ -319,7 +319,7 @@ static int util_probe(struct hv_device *dev, (struct hv_util_service *)dev_id->driver_data; int ret; - srv->recv_buffer = kmalloc(PAGE_SIZE * 2, GFP_KERNEL); + srv->recv_buffer = kmalloc(PAGE_SIZE * 4, GFP_KERNEL); if (!srv->recv_buffer) return -ENOMEM; if (srv->util_init) { -- cgit v1.2.3-70-g09d2 From 5a7fbe7e9ea0b1b9d7ffdba64db1faa3a259164c Mon Sep 17 00:00:00 2001 From: Bert Vermeulen Date: Tue, 8 Jul 2014 14:42:23 +0200 Subject: USB: ftdi_sio: Add extra PID. This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the Testo 435-4 uses this, likely other gear as well. Signed-off-by: Bert Vermeulen Cc: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 3 ++- drivers/usb/serial/ftdi_sio_ids.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 115662c16dc..bf2e30a6824 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -720,7 +720,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, - { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) }, + { USB_DEVICE(TESTO_VID, TESTO_1_PID) }, + { USB_DEVICE(TESTO_VID, TESTO_3_PID) }, { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 500474c48f4..106cc16cc6e 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -798,7 +798,8 @@ * Submitted by Colin Leroy */ #define TESTO_VID 0x128D -#define TESTO_USB_INTERFACE_PID 0x0001 +#define TESTO_1_PID 0x0001 +#define TESTO_3_PID 0x0003 /* * Mobility Electronics products. -- cgit v1.2.3-70-g09d2 From 6d827fbcc370ca259a2905309f64161ab7b10596 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 21 Jun 2014 08:08:08 -0700 Subject: i8k: Fix non-SMP operation Commit f36fdb9f0266 (i8k: Force SMM to run on CPU 0) adds support for multi-core CPUs to the driver. Unfortunately, that causes it to fail loading if compiled without SMP support, at least on 32 bit kernels. Kernel log shows "i8k: unable to get SMM Dell signature", and function i8k_smm is found to return -EINVAL. Testing revealed that the culprit is the missing return value check of set_cpus_allowed_ptr. Fixes: f36fdb9f0266 (i8k: Force SMM to run on CPU 0) Reported-by: Jim Bos Tested-by: Jim Bos Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Guenter Roeck Cc: Andreas Mohr Signed-off-by: Greg Kroah-Hartman --- drivers/char/i8k.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c index d915707d2ba..93dcad0c1cb 100644 --- a/drivers/char/i8k.c +++ b/drivers/char/i8k.c @@ -138,7 +138,9 @@ static int i8k_smm(struct smm_regs *regs) if (!alloc_cpumask_var(&old_mask, GFP_KERNEL)) return -ENOMEM; cpumask_copy(old_mask, ¤t->cpus_allowed); - set_cpus_allowed_ptr(current, cpumask_of(0)); + rc = set_cpus_allowed_ptr(current, cpumask_of(0)); + if (rc) + goto out; if (smp_processor_id() != 0) { rc = -EBUSY; goto out; -- cgit v1.2.3-70-g09d2 From f1a1b63529986d0c8970da182f0935eae059421b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 8 Jul 2014 09:17:16 +0200 Subject: m68k: Fix boot regression on machines with RAM at non-zero My enhancement to store the initial mapping size for later reuse in commit 486df8bc4627bdfc032d11bedcd056cc5343ee62 ("m68k: Increase initial mapping to 8 or 16 MiB if possible") broke booting on machines where RAM doesn't start at address zero. Use pc-relative addressing to fix this. Reported-by: Andreas Schwab Signed-off-by: Geert Uytterhoeven Tested-by: Andreas Schwab --- arch/m68k/kernel/head.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index dbb118e1a4e..a54788458ca 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -921,7 +921,8 @@ L(nocon): jls 1f lsrl #1,%d1 1: - movel %d1,m68k_init_mapped_size + lea %pc@(m68k_init_mapped_size),%a0 + movel %d1,%a0@ mmu_map #PAGE_OFFSET,%pc@(L(phys_kernel_start)),%d1,\ %pc@(m68k_supervisor_cachemode) -- cgit v1.2.3-70-g09d2 From 0378c9a855bfa395f595fbfb049707093e270f69 Mon Sep 17 00:00:00 2001 From: Cristian Stoica Date: Mon, 7 Jul 2014 11:52:41 +0300 Subject: crypto: caam - fix memleak in caam_jr module This patch fixes a memory leak that appears when caam_jr module is unloaded. Cc: # 3.13+ Signed-off-by: Cristian Stoica Signed-off-by: Herbert Xu --- drivers/crypto/caam/jr.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index 1d80bd3636c..b512a4ba756 100644 --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c @@ -453,8 +453,8 @@ static int caam_jr_probe(struct platform_device *pdev) int error; jrdev = &pdev->dev; - jrpriv = kmalloc(sizeof(struct caam_drv_private_jr), - GFP_KERNEL); + jrpriv = devm_kmalloc(jrdev, sizeof(struct caam_drv_private_jr), + GFP_KERNEL); if (!jrpriv) return -ENOMEM; @@ -487,10 +487,8 @@ static int caam_jr_probe(struct platform_device *pdev) /* Now do the platform independent part */ error = caam_jr_init(jrdev); /* now turn on hardware */ - if (error) { - kfree(jrpriv); + if (error) return error; - } jrpriv->dev = jrdev; spin_lock(&driver_data.jr_alloc_lock); -- cgit v1.2.3-70-g09d2 From acfe0ad74d2e1bfc81d1d7bf5e15b043985d3650 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sat, 14 Jun 2014 13:44:31 -0400 Subject: dm: allocate a special workqueue for deferred device removal The commit 2c140a246dc ("dm: allow remove to be deferred") introduced a deferred removal feature for the device mapper. When this feature is used (by passing a flag DM_DEFERRED_REMOVE to DM_DEV_REMOVE_CMD ioctl) and the user tries to remove a device that is currently in use, the device will be removed automatically in the future when the last user closes it. Device mapper used the system workqueue to perform deferred removals. However, some targets (dm-raid1, dm-mpath, dm-stripe) flush work items scheduled for the system workqueue from their destructor. If the destructor itself is called from the system workqueue during deferred removal, it introduces a possible deadlock - the workqueue tries to flush itself. Fix this possible deadlock by introducing a new workqueue for deferred removals. We allocate just one workqueue for all dm targets. The ability of dm targets to process IOs isn't dependent on deferred removal of unused targets, so a deadlock due to shared workqueue isn't possible. Also, cleanup local_init() to eliminate potential for returning success on failure. Signed-off-by: Mikulas Patocka Signed-off-by: Dan Carpenter Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.13+ --- drivers/md/dm.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 437d99045ef..32b958dbc49 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -54,6 +54,8 @@ static void do_deferred_remove(struct work_struct *w); static DECLARE_WORK(deferred_remove_work, do_deferred_remove); +static struct workqueue_struct *deferred_remove_workqueue; + /* * For bio-based dm. * One of these is allocated per bio. @@ -276,16 +278,24 @@ static int __init local_init(void) if (r) goto out_free_rq_tio_cache; + deferred_remove_workqueue = alloc_workqueue("kdmremove", WQ_UNBOUND, 1); + if (!deferred_remove_workqueue) { + r = -ENOMEM; + goto out_uevent_exit; + } + _major = major; r = register_blkdev(_major, _name); if (r < 0) - goto out_uevent_exit; + goto out_free_workqueue; if (!_major) _major = r; return 0; +out_free_workqueue: + destroy_workqueue(deferred_remove_workqueue); out_uevent_exit: dm_uevent_exit(); out_free_rq_tio_cache: @@ -299,6 +309,7 @@ out_free_io_cache: static void local_exit(void) { flush_scheduled_work(); + destroy_workqueue(deferred_remove_workqueue); kmem_cache_destroy(_rq_tio_cache); kmem_cache_destroy(_io_cache); @@ -407,7 +418,7 @@ static void dm_blk_close(struct gendisk *disk, fmode_t mode) if (atomic_dec_and_test(&md->open_count) && (test_bit(DMF_DEFERRED_REMOVE, &md->flags))) - schedule_work(&deferred_remove_work); + queue_work(deferred_remove_workqueue, &deferred_remove_work); dm_put(md); -- cgit v1.2.3-70-g09d2 From bf14299f1ce96c9d632533c4557303f8a74afc9e Mon Sep 17 00:00:00 2001 From: Jana Saout Date: Tue, 24 Jun 2014 14:27:04 -0400 Subject: dm crypt, dm zero: update author name following legal name change Signed-off-by: Jana Saout Signed-off-by: Mike Snitzer --- drivers/md/dm-crypt.c | 4 ++-- drivers/md/dm-zero.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 53b213226c0..4cba2d808af 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2003 Christophe Saout + * Copyright (C) 2003 Jana Saout * Copyright (C) 2004 Clemens Fruhwirth * Copyright (C) 2006-2009 Red Hat, Inc. All rights reserved. * Copyright (C) 2013 Milan Broz @@ -1996,6 +1996,6 @@ static void __exit dm_crypt_exit(void) module_init(dm_crypt_init); module_exit(dm_crypt_exit); -MODULE_AUTHOR("Christophe Saout "); +MODULE_AUTHOR("Jana Saout "); MODULE_DESCRIPTION(DM_NAME " target for transparent encryption / decryption"); MODULE_LICENSE("GPL"); diff --git a/drivers/md/dm-zero.c b/drivers/md/dm-zero.c index c99003e0d47..b9a64bbce30 100644 --- a/drivers/md/dm-zero.c +++ b/drivers/md/dm-zero.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2003 Christophe Saout + * Copyright (C) 2003 Jana Saout * * This file is released under the GPL. */ @@ -79,6 +79,6 @@ static void __exit dm_zero_exit(void) module_init(dm_zero_init) module_exit(dm_zero_exit) -MODULE_AUTHOR("Christophe Saout "); +MODULE_AUTHOR("Jana Saout "); MODULE_DESCRIPTION(DM_NAME " dummy target returning zeros"); MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 10f1d5d111e8aed46a0f1179faf9a3cf422f689e Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Fri, 27 Jun 2014 15:29:04 -0400 Subject: dm io: fix a race condition in the wake up code for sync_io There's a race condition between the atomic_dec_and_test(&io->count) in dec_count() and the waking of the sync_io() thread. If the thread is spuriously woken immediately after the decrement it may exit, making the on stack io struct invalid, yet the dec_count could still be using it. Fix this race by using a completion in sync_io() and dec_count(). Reported-by: Minfei Huang Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Acked-by: Mikulas Patocka Cc: stable@vger.kernel.org --- drivers/md/dm-io.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index 3842ac738f9..db404a0f7e2 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include @@ -32,7 +33,7 @@ struct dm_io_client { struct io { unsigned long error_bits; atomic_t count; - struct task_struct *sleeper; + struct completion *wait; struct dm_io_client *client; io_notify_fn callback; void *context; @@ -121,8 +122,8 @@ static void dec_count(struct io *io, unsigned int region, int error) invalidate_kernel_vmap_range(io->vma_invalidate_address, io->vma_invalidate_size); - if (io->sleeper) - wake_up_process(io->sleeper); + if (io->wait) + complete(io->wait); else { unsigned long r = io->error_bits; @@ -387,6 +388,7 @@ static int sync_io(struct dm_io_client *client, unsigned int num_regions, */ volatile char io_[sizeof(struct io) + __alignof__(struct io) - 1]; struct io *io = (struct io *)PTR_ALIGN(&io_, __alignof__(struct io)); + DECLARE_COMPLETION_ONSTACK(wait); if (num_regions > 1 && (rw & RW_MASK) != WRITE) { WARN_ON(1); @@ -395,7 +397,7 @@ static int sync_io(struct dm_io_client *client, unsigned int num_regions, io->error_bits = 0; atomic_set(&io->count, 1); /* see dispatch_io() */ - io->sleeper = current; + io->wait = &wait; io->client = client; io->vma_invalidate_address = dp->vma_invalidate_address; @@ -403,15 +405,7 @@ static int sync_io(struct dm_io_client *client, unsigned int num_regions, dispatch_io(rw, num_regions, where, dp, io, 1); - while (1) { - set_current_state(TASK_UNINTERRUPTIBLE); - - if (!atomic_read(&io->count)) - break; - - io_schedule(); - } - set_current_state(TASK_RUNNING); + wait_for_completion_io(&wait); if (error_bits) *error_bits = io->error_bits; @@ -434,7 +428,7 @@ static int async_io(struct dm_io_client *client, unsigned int num_regions, io = mempool_alloc(client->pool, GFP_NOIO); io->error_bits = 0; atomic_set(&io->count, 1); /* see dispatch_io() */ - io->sleeper = NULL; + io->wait = NULL; io->client = client; io->callback = fn; io->context = context; -- cgit v1.2.3-70-g09d2 From 7a7a3b45fed9a144dbf766ee842a4c5d0632b81d Mon Sep 17 00:00:00 2001 From: Jun'ichi Nomura Date: Tue, 8 Jul 2014 00:55:14 +0000 Subject: dm mpath: fix IO hang due to logic bug in multipath_busy Commit e80991773 ("dm mpath: push back requests instead of queueing") modified multipath_busy() to return true if !pg_ready(). pg_ready() checks the current state of the multipath device and may return false even if a new IO is needed to change the state. Bart Van Assche reported that he had multipath IO lockup when he was performing cable pull tests. Analysis showed that the multipath device had a single path group with both paths active, but that the path group itself was not active. During the multipath device state transitions 'queue_io' got set but nothing could clear it. Clearing 'queue_io' only happens in __choose_pgpath(), but it won't be called if multipath_busy() returns true due to pg_ready() returning false when 'queue_io' is set. As such the !pg_ready() check in multipath_busy() is wrong because new IO will not be sent to multipath target and the multipath state change won't happen. That results in multipath IO lockup. The intent of multipath_busy() is to avoid unnecessary cycles of dequeue + request_fn + requeue if it is known that the multipath device will requeue. Such "busy" situations would be: - path group is being activated - there is no path and the multipath is setup to requeue if no path Fix multipath_busy() to return "busy" early only for these specific situations. Reported-by: Bart Van Assche Tested-by: Bart Van Assche Signed-off-by: Jun'ichi Nomura Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # v3.15 --- drivers/md/dm-mpath.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 3f6fd9d33ba..f4167b013d9 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1611,8 +1611,9 @@ static int multipath_busy(struct dm_target *ti) spin_lock_irqsave(&m->lock, flags); - /* pg_init in progress, requeue until done */ - if (!pg_ready(m)) { + /* pg_init in progress or no paths available */ + if (m->pg_init_in_progress || + (!m->nr_valid_paths && m->queue_if_no_path)) { busy = 1; goto out; } -- cgit v1.2.3-70-g09d2 From f6be5e64500abbba44e191e1ca0f3366c7d0291b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 3 Jul 2014 11:17:55 -0400 Subject: drm/radeon/dp: return -EIO for flags not zero case If there are error flags in the aux transaction return -EIO rather than -EBUSY. -EIO restarts the whole transaction while -EBUSY jus retries. Fixes problematic aux transfers. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=80684 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 35f4182c63b..b1e11f8434e 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -127,7 +127,7 @@ static int radeon_process_aux_ch(struct radeon_i2c_chan *chan, /* flags not zero */ if (args.v1.ucReplyStatus == 2) { DRM_DEBUG_KMS("dp_aux_ch flags not zero\n"); - r = -EBUSY; + r = -EIO; goto done; } -- cgit v1.2.3-70-g09d2 From 9b7d786b900baf7c0d1a7e211570aef1cb27590f Mon Sep 17 00:00:00 2001 From: Christian König Date: Mon, 7 Jul 2014 11:16:29 +0200 Subject: drm/radeon: only print meaningful VM faults MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 6 ++++-- drivers/gpu/drm/radeon/evergreen.c | 6 ++++-- drivers/gpu/drm/radeon/si.c | 6 ++++-- 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index dcd4518a9b0..0b247110713 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -7676,14 +7676,16 @@ restart_ih: addr = RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR); status = RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS); mc_client = RREG32(VM_CONTEXT1_PROTECTION_FAULT_MCCLIENT); + /* reset addr and status */ + WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); + if (addr == 0x0 && status == 0x0) + break; dev_err(rdev->dev, "GPU fault detected: %d 0x%08x\n", src_id, src_data); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x%08X\n", addr); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", status); cik_vm_decode_fault(rdev, status, addr, mc_client); - /* reset addr and status */ - WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); break; case 167: /* VCE */ DRM_DEBUG("IH: VCE int: 0x%08x\n", src_data); diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index e2f605224e8..d5d4d3a8673 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -5066,14 +5066,16 @@ restart_ih: case 147: addr = RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR); status = RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS); + /* reset addr and status */ + WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); + if (addr == 0x0 && status == 0x0) + break; dev_err(rdev->dev, "GPU fault detected: %d 0x%08x\n", src_id, src_data); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x%08X\n", addr); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", status); cayman_vm_decode_fault(rdev, status, addr); - /* reset addr and status */ - WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); break; case 176: /* CP_INT in ring buffer */ case 177: /* CP_INT in IB1 */ diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 730cee2c34c..eba0225259a 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -6376,14 +6376,16 @@ restart_ih: case 147: addr = RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR); status = RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS); + /* reset addr and status */ + WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); + if (addr == 0x0 && status == 0x0) + break; dev_err(rdev->dev, "GPU fault detected: %d 0x%08x\n", src_id, src_data); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x%08X\n", addr); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", status); si_vm_decode_fault(rdev, status, addr); - /* reset addr and status */ - WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); break; case 176: /* RINGID0 CP_INT */ radeon_fence_process(rdev, RADEON_RING_TYPE_GFX_INDEX); -- cgit v1.2.3-70-g09d2 From 6abafb78f9881b4891baf74ab4e9f090ae45230e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 7 Jul 2014 17:59:37 -0400 Subject: drm/radeon: fix typo in golden register setup on evergreen Fixes hangs on driver load on some cards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76998 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index d5d4d3a8673..f7ece0ff431 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -189,7 +189,7 @@ static const u32 evergreen_golden_registers[] = 0x8c1c, 0xffffffff, 0x00001010, 0x28350, 0xffffffff, 0x00000000, 0xa008, 0xffffffff, 0x00010000, - 0x5cc, 0xffffffff, 0x00000001, + 0x5c4, 0xffffffff, 0x00000001, 0x9508, 0xffffffff, 0x00000002, 0x913c, 0x0000000f, 0x0000000a }; @@ -476,7 +476,7 @@ static const u32 cedar_golden_registers[] = 0x8c1c, 0xffffffff, 0x00001010, 0x28350, 0xffffffff, 0x00000000, 0xa008, 0xffffffff, 0x00010000, - 0x5cc, 0xffffffff, 0x00000001, + 0x5c4, 0xffffffff, 0x00000001, 0x9508, 0xffffffff, 0x00000002 }; @@ -635,7 +635,7 @@ static const u32 juniper_mgcg_init[] = static const u32 supersumo_golden_registers[] = { 0x5eb4, 0xffffffff, 0x00000002, - 0x5cc, 0xffffffff, 0x00000001, + 0x5c4, 0xffffffff, 0x00000001, 0x7030, 0xffffffff, 0x00000011, 0x7c30, 0xffffffff, 0x00000011, 0x6104, 0x01000300, 0x00000000, @@ -719,7 +719,7 @@ static const u32 sumo_golden_registers[] = static const u32 wrestler_golden_registers[] = { 0x5eb4, 0xffffffff, 0x00000002, - 0x5cc, 0xffffffff, 0x00000001, + 0x5c4, 0xffffffff, 0x00000001, 0x7030, 0xffffffff, 0x00000011, 0x7c30, 0xffffffff, 0x00000011, 0x6104, 0x01000300, 0x00000000, -- cgit v1.2.3-70-g09d2 From ed96377132e564d797c48a5490fd46bed01c4273 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 8 Jul 2014 18:25:25 -0400 Subject: drm/radeon: fix typo in ci_stop_dpm() Need to use the RREG32_SMC() accessor since the register is an smc indirect index. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/ci_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c index 10dae4106c0..584090ac3eb 100644 --- a/drivers/gpu/drm/radeon/ci_dpm.c +++ b/drivers/gpu/drm/radeon/ci_dpm.c @@ -1179,7 +1179,7 @@ static int ci_stop_dpm(struct radeon_device *rdev) tmp &= ~GLOBAL_PWRMGT_EN; WREG32_SMC(GENERAL_PWRMGT, tmp); - tmp = RREG32(SCLK_PWRMGT_CNTL); + tmp = RREG32_SMC(SCLK_PWRMGT_CNTL); tmp &= ~DYNAMIC_PM_EN; WREG32_SMC(SCLK_PWRMGT_CNTL, tmp); -- cgit v1.2.3-70-g09d2 From 41959341ac7e33dd360c7a881d13566f9eca37b2 Mon Sep 17 00:00:00 2001 From: Alexandre Demers Date: Tue, 8 Jul 2014 22:27:36 -0400 Subject: drm/radeon/dpm: Reenabling SS on Cayman It reverts commit c745fe611ca42295c9d91d8e305d27983e9132ef now that Cayman is stable since VDDCI fix. Spread spectrum was not the culprit. This depends on b0880e87c1fd038b84498944f52e52c3e86ebe59 (drm/radeon/dpm: fix vddci setup typo on cayman). Signed-off-by: Alexandre Demers Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/rv770_dpm.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/rv770_dpm.c b/drivers/gpu/drm/radeon/rv770_dpm.c index da041a43d82..3c76e1dcdf0 100644 --- a/drivers/gpu/drm/radeon/rv770_dpm.c +++ b/drivers/gpu/drm/radeon/rv770_dpm.c @@ -2329,12 +2329,6 @@ void rv770_get_engine_memory_ss(struct radeon_device *rdev) pi->mclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss, ASIC_INTERNAL_MEMORY_SS, 0); - /* disable ss, causes hangs on some cayman boards */ - if (rdev->family == CHIP_CAYMAN) { - pi->sclk_ss = false; - pi->mclk_ss = false; - } - if (pi->sclk_ss || pi->mclk_ss) pi->dynamic_ss = true; else -- cgit v1.2.3-70-g09d2 From 9f88b906b4455465d60ac18b8c95904f320038d5 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 3 Jul 2014 15:34:38 +0100 Subject: x86-64, vdso: Fix vDSO build breakage due to empty .rela.dyn Certain ld versions (observed with 2.20.0) put an empty .rela.dyn section into shared object files, breaking the assumption on the number of sections to be copied to the final output. Simply discard any empty SHT_REL and SHT_RELA sections to address this. Signed-off-by: Jan Beulich Link: http://lkml.kernel.org/r/53B5861E02000078000204D1@mail.emea.novell.com Acked-by: Andy Lutomirski Tested-by: Boris Ostrovsky Tested-by: Andrew Morton Signed-off-by: H. Peter Anvin --- arch/x86/vdso/vdso2c.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h index df95a2fdff7..11b65d4f941 100644 --- a/arch/x86/vdso/vdso2c.h +++ b/arch/x86/vdso/vdso2c.h @@ -93,6 +93,9 @@ static void BITSFUNC(copy_section)(struct BITSFUNC(fake_sections) *out, uint64_t flags = GET_LE(&in->sh_flags); bool copy = flags & SHF_ALLOC && + (GET_LE(&in->sh_size) || + (GET_LE(&in->sh_type) != SHT_RELA && + GET_LE(&in->sh_type) != SHT_REL)) && strcmp(name, ".altinstructions") && strcmp(name, ".altinstr_replacement"); -- cgit v1.2.3-70-g09d2 From c760569d0e9c06b39dd19e82bff0b704d90a73b7 Mon Sep 17 00:00:00 2001 From: Prathyush K Date: Fri, 11 Jul 2014 08:02:15 +0900 Subject: ARM: EXYNOS: Add support for clock handling in power domain While powering on/off a local powerdomain in exynos5 chipsets, the input clocks to each device gets modified. This behaviour is based on the SYSCLK_SYS_PWR_REG registers. E.g. SYSCLK_MFC_SYS_PWR_REG = 0x0, the parent of input clock to MFC (aclk333) gets modified to oscclk = 0x1, no change in clocks. The recommended value of SYSCLK_SYS_PWR_REG before power gating any domain is 0x0. So we must also restore the clocks while powering on a domain everytime. This patch adds the framework for getting the required mux and parent clocks through a power domain device node. With this patch, while powering off a domain, parent is set to oscclk and while powering back on, its re-set to the correct parent which is as per the recommended pd on/off sequence. Signed-off-by: Prathyush K Signed-off-by: Andrew Bresticker Signed-off-by: Arun Kumar K Signed-off-by: Shaik Ameer Basha Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- .../bindings/arm/exynos/power_domain.txt | 20 +++++++ arch/arm/mach-exynos/pm_domains.c | 61 +++++++++++++++++++++- 2 files changed, 80 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt index 5216b419016..8b4f7b7fe88 100644 --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt @@ -9,6 +9,18 @@ Required Properties: - reg: physical base address of the controller and length of memory mapped region. +Optional Properties: +- clocks: List of clock handles. The parent clocks of the input clocks to the + devices in this power domain are set to oscclk before power gating + and restored back after powering on a domain. This is required for + all domains which are powered on and off and not required for unused + domains. +- clock-names: The following clocks can be specified: + - oscclk: Oscillator clock. + - pclkN, clkN: Pairs of parent of input clock and input clock to the + devices in this power domain. Maximum of 4 pairs (N = 0 to 3) + are supported currently. + Node of a device using power domains must have a samsung,power-domain property defined with a phandle to respective power domain. @@ -19,6 +31,14 @@ Example: reg = <0x10023C00 0x10>; }; + mfc_pd: power-domain@10044060 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044060 0x20>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, + <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "pclk0", "clk0"; + }; + Example of the node using power domain: node { diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index fe6570ebbdd..797cb134bff 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -24,6 +25,8 @@ #include "regs-pmu.h" +#define MAX_CLK_PER_DOMAIN 4 + /* * Exynos specific wrapper around the generic power domain */ @@ -32,6 +35,9 @@ struct exynos_pm_domain { char const *name; bool is_off; struct generic_pm_domain pd; + struct clk *oscclk; + struct clk *clk[MAX_CLK_PER_DOMAIN]; + struct clk *pclk[MAX_CLK_PER_DOMAIN]; }; static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) @@ -44,6 +50,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) pd = container_of(domain, struct exynos_pm_domain, pd); base = pd->base; + /* Set oscclk before powering off a domain*/ + if (!power_on) { + int i; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->clk[i])) + break; + if (clk_set_parent(pd->clk[i], pd->oscclk)) + pr_err("%s: error setting oscclk as parent to clock %d\n", + pd->name, i); + } + } + pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0; __raw_writel(pwr, base); @@ -60,6 +79,20 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) cpu_relax(); usleep_range(80, 100); } + + /* Restore clocks after powering on a domain*/ + if (power_on) { + int i; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->clk[i])) + break; + if (clk_set_parent(pd->clk[i], pd->pclk[i])) + pr_err("%s: error setting parent to clock%d\n", + pd->name, i); + } + } + return 0; } @@ -152,9 +185,11 @@ static __init int exynos4_pm_init_power_domain(void) for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { struct exynos_pm_domain *pd; - int on; + int on, i; + struct device *dev; pdev = of_find_device_by_node(np); + dev = &pdev->dev; pd = kzalloc(sizeof(*pd), GFP_KERNEL); if (!pd) { @@ -170,6 +205,30 @@ static __init int exynos4_pm_init_power_domain(void) pd->pd.power_on = exynos_pd_power_on; pd->pd.of_node = np; + pd->oscclk = clk_get(dev, "oscclk"); + if (IS_ERR(pd->oscclk)) + goto no_clk; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + char clk_name[8]; + + snprintf(clk_name, sizeof(clk_name), "clk%d", i); + pd->clk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->clk[i])) + break; + snprintf(clk_name, sizeof(clk_name), "pclk%d", i); + pd->pclk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->pclk[i])) { + clk_put(pd->clk[i]); + pd->clk[i] = ERR_PTR(-EINVAL); + break; + } + } + + if (IS_ERR(pd->clk[0])) + clk_put(pd->oscclk); + +no_clk: platform_set_drvdata(pdev, pd); on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; -- cgit v1.2.3-70-g09d2 From c0fb262bf226a5c943e4309662353d5fb905310a Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Fri, 11 Jul 2014 08:03:59 +0900 Subject: clk: exynos5420: Add IDs for clocks used in PD mfc Adds IDs for MUX clocks to be used by power domain for MFC for doing re-parenting while pd on/off. Signed-off-by: Arun Kumar K Signed-off-by: Shaik Ameer Basha Acked-by: Tomasz Figa Signed-off-by: Kukjin Kim --- drivers/clk/samsung/clk-exynos5420.c | 6 ++++-- include/dt-bindings/clock/exynos5420.h | 2 ++ 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 9d7d7eed03f..f74f882f7f2 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -631,7 +631,8 @@ static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = { SRC_TOP4, 16, 1), MUX(0, "mout_user_aclk266", mout_user_aclk266_p, SRC_TOP4, 20, 1), MUX(0, "mout_user_aclk166", mout_user_aclk166_p, SRC_TOP4, 24, 1), - MUX(0, "mout_user_aclk333", mout_user_aclk333_p, SRC_TOP4, 28, 1), + MUX(CLK_MOUT_USER_ACLK333, "mout_user_aclk333", mout_user_aclk333_p, + SRC_TOP4, 28, 1), MUX(0, "mout_user_aclk400_disp1", mout_user_aclk400_disp1_p, SRC_TOP5, 0, 1), @@ -684,7 +685,8 @@ static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = { SRC_TOP11, 12, 1), MUX(0, "mout_sw_aclk266", mout_sw_aclk266_p, SRC_TOP11, 20, 1), MUX(0, "mout_sw_aclk166", mout_sw_aclk166_p, SRC_TOP11, 24, 1), - MUX(0, "mout_sw_aclk333", mout_sw_aclk333_p, SRC_TOP11, 28, 1), + MUX(CLK_MOUT_SW_ACLK333, "mout_sw_aclk333", mout_sw_aclk333_p, + SRC_TOP11, 28, 1), MUX(0, "mout_sw_aclk400_disp1", mout_sw_aclk400_disp1_p, SRC_TOP12, 4, 1), diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h index 97dcb89d37d..3fc08ff24fa 100644 --- a/include/dt-bindings/clock/exynos5420.h +++ b/include/dt-bindings/clock/exynos5420.h @@ -203,6 +203,8 @@ #define CLK_MOUT_G3D 641 #define CLK_MOUT_VPLL 642 #define CLK_MOUT_MAUDIO0 643 +#define CLK_MOUT_USER_ACLK333 644 +#define CLK_MOUT_SW_ACLK333 645 /* divider clocks */ #define CLK_DOUT_PIXEL 768 -- cgit v1.2.3-70-g09d2 From cacaeb829385ef57b267c8e30308360a89994c1f Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Fri, 11 Jul 2014 08:04:03 +0900 Subject: ARM: dts: Add clock property for mfc_pd in exynos5420 Adding the optional clock property for the mfc_pd for handling the re-parenting while pd on/off. Signed-off-by: Arun Kumar K Signed-off-by: Shaik Ameer Basha Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 79e9119d3f8..15957227ffd 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -260,6 +260,9 @@ mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd"; reg = <0x10044060 0x20>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, + <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "pclk0", "clk0"; }; disp_pd: power-domain@100440C0 { -- cgit v1.2.3-70-g09d2 From d093601be5e97d2729614419d0d256ed3b6a56b0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 3 Jul 2014 15:35:07 +0100 Subject: x86-32, vdso: Fix vDSO build error due to missing align_vdso_addr() Relying on static functions used just once to get inlined (and subsequently have dead code paths eliminated) is wrong: Compilers are free to decide whether they do this, regardless of optimization level. With this not happening for vdso_addr() (observed with gcc 4.1.x), an unresolved reference to align_vdso_addr() causes the build to fail. [ hpa: vdso_addr() is never actually used on x86-32, as calculate_addr in map_vdso() is always false. It ought to be possible to clean this up further, but this fixes the immediate problem. ] Signed-off-by: Jan Beulich Link: http://lkml.kernel.org/r/53B5863B02000078000204D5@mail.emea.novell.com Acked-by: Andy Lutomirski Tested-by: Boris Ostrovsky Tested-by: Andrew Morton Signed-off-by: H. Peter Anvin --- arch/x86/vdso/vma.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index e1513c47872..5a5176de8d0 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -62,6 +62,9 @@ struct linux_binprm; Only used for the 64-bit and x32 vdsos. */ static unsigned long vdso_addr(unsigned long start, unsigned len) { +#ifdef CONFIG_X86_32 + return 0; +#else unsigned long addr, end; unsigned offset; end = (start + PMD_SIZE - 1) & PMD_MASK; @@ -83,6 +86,7 @@ static unsigned long vdso_addr(unsigned long start, unsigned len) addr = align_vdso_addr(addr); return addr; +#endif } static int map_vdso(const struct vdso_image *image, bool calculate_addr) -- cgit v1.2.3-70-g09d2 From bed7118988ef48063c72f67cc2701c72663b3870 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 11 Jul 2014 08:15:32 +0900 Subject: ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 Currently, the exynos cpuidle driver works correctly only on exynos4210 and 5250. Trying to use it with just one CPU online on any other exynos SoCs will lead to system failure, due to unsupported AFTR mode on other SoCs. This patch fixes the problem by registering the driver only on supported SoCs and letting others simply use default WFI mode until support for them is added. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f38cf7c110c..176bbf574d4 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -173,10 +173,8 @@ static struct platform_device exynos_cpuidle = { void __init exynos_cpuidle_init(void) { - if (soc_is_exynos5440()) - return; - - platform_device_register(&exynos_cpuidle); + if (soc_is_exynos4210() || soc_is_exynos5250()) + platform_device_register(&exynos_cpuidle); } void __init exynos_cpufreq_init(void) -- cgit v1.2.3-70-g09d2 From c557d392fbf5badd693ea1946a4317c87a26a716 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 6 Jul 2014 11:29:52 -0400 Subject: serial: Test for no tx data on tx restart Commit 717f3bbab3c7628736ef738fdbf3d9a28578c26c, 'serial_core: Fix conditional start_tx on ring buffer not empty' exposes an incorrect assumption in several drivers' start_tx methods; the tx ring buffer can, in fact, be empty when restarting tx while performing flow control. Affected drivers: sunsab.c ip22zilog.c pmac_zilog.c sunzilog.c m32r_sio.c imx.c Other in-tree serial drivers either are not affected or already test for empty tx ring buffer before transmitting. Test for empty tx ring buffer in start_tx() method, after transmitting x_char (if applicable). Reported-by: Aaro Koskinen Cc: Seth Bollinger Cc: "David S. Miller" Cc: Sam Ravnborg Cc: Thomas Bogendoerfer Signed-off-by: Peter Hurley Cc: stable # 3.15 Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 3 +++ drivers/tty/serial/ip22zilog.c | 2 ++ drivers/tty/serial/m32r_sio.c | 8 +++++--- drivers/tty/serial/pmac_zilog.c | 3 +++ drivers/tty/serial/sunsab.c | 3 +++ drivers/tty/serial/sunzilog.c | 2 ++ 6 files changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index e2f93874989..56bd9aa5615 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -567,6 +567,9 @@ static void imx_start_tx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + if (uart_circ_empty(&port.state->xmit)) + return; + if (USE_IRDA(sport)) { /* half duplex in IrDA mode; have to disable receive mode */ temp = readl(sport->port.membase + UCR4); diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c index 1efd4c36ba0..99b7b869786 100644 --- a/drivers/tty/serial/ip22zilog.c +++ b/drivers/tty/serial/ip22zilog.c @@ -603,6 +603,8 @@ static void ip22zilog_start_tx(struct uart_port *port) } else { struct circ_buf *xmit = &port->state->xmit; + if (uart_circ_empty(xmit)) + return; writeb(xmit->buf[xmit->tail], &channel->data); ZSDELAY(); ZS_WSYNC(channel); diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c index 68f2c53e0b5..5702828fb62 100644 --- a/drivers/tty/serial/m32r_sio.c +++ b/drivers/tty/serial/m32r_sio.c @@ -266,9 +266,11 @@ static void m32r_sio_start_tx(struct uart_port *port) if (!(up->ier & UART_IER_THRI)) { up->ier |= UART_IER_THRI; serial_out(up, UART_IER, up->ier); - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; + if (!uart_circ_empty(xmit)) { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + } } while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); #else diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 8193635103e..f7ad5b90305 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -653,6 +653,8 @@ static void pmz_start_tx(struct uart_port *port) } else { struct circ_buf *xmit = &port->state->xmit; + if (uart_circ_empty(xmit)) + goto out; write_zsdata(uap, xmit->buf[xmit->tail]); zssync(uap); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -661,6 +663,7 @@ static void pmz_start_tx(struct uart_port *port) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uap->port); } + out: pmz_debug("pmz: start_tx() done.\n"); } diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index 80a58eca785..2f57df9a71d 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -427,6 +427,9 @@ static void sunsab_start_tx(struct uart_port *port) struct circ_buf *xmit = &up->port.state->xmit; int i; + if (uart_circ_empty(xmit)) + return; + up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); writeb(up->interrupt_mask1, &up->regs->w.imr1); diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index a85db8b8715..02df3940b95 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -703,6 +703,8 @@ static void sunzilog_start_tx(struct uart_port *port) } else { struct circ_buf *xmit = &port->state->xmit; + if (uart_circ_empty(xmit)) + return; writeb(xmit->buf[xmit->tail], &channel->data); ZSDELAY(); ZS_WSYNC(channel); -- cgit v1.2.3-70-g09d2 From 99ecb001f52ef10ebf686d4e55b1cf64b1e56aa6 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 6 Jul 2014 11:29:53 -0400 Subject: serial: arc_uart: Use uart_circ_empty() for open-coded comparison Replace open-coded test for empty tx ring buffer with equivalent helper function, uart_circ_empty(). No functional change. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/arc_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index c9f5c9dcc15..008c223eaf2 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -177,7 +177,7 @@ static void arc_serial_tx_chars(struct arc_uart_port *uart) uart->port.icount.tx++; uart->port.x_char = 0; sent = 1; - } else if (xmit->tail != xmit->head) { /* TODO: uart_circ_empty */ + } else if (!uart_circ_empty(xmit)) { ch = xmit->buf[xmit->tail]; xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); uart->port.icount.tx++; -- cgit v1.2.3-70-g09d2 From e623fbf1c4c140764e084e9159a352750c035d44 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 8 Jul 2014 16:00:09 +1000 Subject: powerpc/cell: Fix compilation with CONFIG_COREDUMP=n Commit 046d662f4818 "coredump: make core dump functionality optional" made the coredump optional, but didn't update the spufs code that depends on it. That leads to build errors such as: arch/powerpc/platforms/built-in.o: In function `.spufs_arch_write_note': coredump.c:(.text+0x22cd4): undefined reference to `.dump_emit' coredump.c:(.text+0x22cf4): undefined reference to `.dump_emit' coredump.c:(.text+0x22d0c): undefined reference to `.dump_align' coredump.c:(.text+0x22d48): undefined reference to `.dump_emit' coredump.c:(.text+0x22e7c): undefined reference to `.dump_skip' Fix it by adding some ifdefs in the cell code. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/cell/spu_syscalls.c | 2 ++ arch/powerpc/platforms/cell/spufs/Makefile | 3 ++- arch/powerpc/platforms/cell/spufs/syscalls.c | 6 ++++-- 3 files changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/cell/spu_syscalls.c b/arch/powerpc/platforms/cell/spu_syscalls.c index 38e0a1a5cec..5e6e0bad6db 100644 --- a/arch/powerpc/platforms/cell/spu_syscalls.c +++ b/arch/powerpc/platforms/cell/spu_syscalls.c @@ -111,6 +111,7 @@ asmlinkage long sys_spu_run(int fd, __u32 __user *unpc, __u32 __user *ustatus) return ret; } +#ifdef CONFIG_COREDUMP int elf_coredump_extra_notes_size(void) { struct spufs_calls *calls; @@ -142,6 +143,7 @@ int elf_coredump_extra_notes_write(struct coredump_params *cprm) return ret; } +#endif void notify_spus_active(void) { diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile index b9d5d678aa4..52a7d2596d3 100644 --- a/arch/powerpc/platforms/cell/spufs/Makefile +++ b/arch/powerpc/platforms/cell/spufs/Makefile @@ -1,8 +1,9 @@ obj-$(CONFIG_SPU_FS) += spufs.o -spufs-y += inode.o file.o context.o syscalls.o coredump.o +spufs-y += inode.o file.o context.o syscalls.o spufs-y += sched.o backing_ops.o hw_ops.o run.o gang.o spufs-y += switch.o fault.o lscsa_alloc.o +spufs-$(CONFIG_COREDUMP) += coredump.o # magic for the trace events CFLAGS_sched.o := -I$(src) diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c index b045fdda484..a87200a535f 100644 --- a/arch/powerpc/platforms/cell/spufs/syscalls.c +++ b/arch/powerpc/platforms/cell/spufs/syscalls.c @@ -79,8 +79,10 @@ static long do_spu_create(const char __user *pathname, unsigned int flags, struct spufs_calls spufs_calls = { .create_thread = do_spu_create, .spu_run = do_spu_run, - .coredump_extra_notes_size = spufs_coredump_extra_notes_size, - .coredump_extra_notes_write = spufs_coredump_extra_notes_write, .notify_spus_active = do_notify_spus_active, .owner = THIS_MODULE, +#ifdef CONFIG_COREDUMP + .coredump_extra_notes_size = spufs_coredump_extra_notes_size, + .coredump_extra_notes_write = spufs_coredump_extra_notes_write, +#endif }; -- cgit v1.2.3-70-g09d2 From cd68098bcedd432f21013b2a3b0737b9222da363 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 8 Jul 2014 17:10:45 +1000 Subject: powerpc: Clean up MMU_FTRS_A2 and MMU_FTR_TYPE_3E In fb5a515704d7 "powerpc: Remove platforms/wsp and associated pieces", we removed the last user of MMU_FTRS_A2. So remove it. MMU_FTRS_A2 was the last user of MMU_FTR_TYPE_3E, so remove it also. This leaves some unreachable code in mmu_context_nohash.c, so remove that also. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu.h | 10 +--------- arch/powerpc/mm/mmu_context_nohash.c | 12 +----------- 2 files changed, 2 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index f8d1d6dcf7d..e61f24ed4e6 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -19,8 +19,7 @@ #define MMU_FTR_TYPE_40x ASM_CONST(0x00000004) #define MMU_FTR_TYPE_44x ASM_CONST(0x00000008) #define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010) -#define MMU_FTR_TYPE_3E ASM_CONST(0x00000020) -#define MMU_FTR_TYPE_47x ASM_CONST(0x00000040) +#define MMU_FTR_TYPE_47x ASM_CONST(0x00000020) /* * This is individual features @@ -106,13 +105,6 @@ MMU_FTR_CI_LARGE_PAGE #define MMU_FTRS_PA6T MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \ MMU_FTR_CI_LARGE_PAGE | MMU_FTR_NO_SLBIE_B -#define MMU_FTRS_A2 MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | \ - MMU_FTR_USE_TLBIVAX_BCAST | \ - MMU_FTR_LOCK_BCAST_INVAL | \ - MMU_FTR_USE_TLBRSRV | \ - MMU_FTR_USE_PAIRED_MAS | \ - MMU_FTR_TLBIEL | \ - MMU_FTR_16M_PAGE #ifndef __ASSEMBLY__ #include diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index af3d78e1930..928ebe79668 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -410,17 +410,7 @@ void __init mmu_context_init(void) } else if (mmu_has_feature(MMU_FTR_TYPE_47x)) { first_context = 1; last_context = 65535; - } else -#ifdef CONFIG_PPC_BOOK3E_MMU - if (mmu_has_feature(MMU_FTR_TYPE_3E)) { - u32 mmucfg = mfspr(SPRN_MMUCFG); - u32 pid_bits = (mmucfg & MMUCFG_PIDSIZE_MASK) - >> MMUCFG_PIDSIZE_SHIFT; - first_context = 1; - last_context = (1UL << (pid_bits + 1)) - 1; - } else -#endif - { + } else { first_context = 1; last_context = 255; } -- cgit v1.2.3-70-g09d2 From c733cf83bbd2b0978456822cdac8c726085dcc14 Mon Sep 17 00:00:00 2001 From: Preeti U Murthy Date: Wed, 2 Jul 2014 09:19:35 +0530 Subject: powerpc/powernv: Check for IRQHAPPENED before sleeping Commit 8d6f7c5a: "powerpc/powernv: Make it possible to skip the IRQHAPPENED check in power7_nap()" added code that prevents cpus from checking for pending interrupts just before entering sleep state, which is wrong. These interrupts are delivered during the soft irq disabled state of the cpu. A cpu cannot enter any idle state with pending interrupts because they will never be serviced until the next time the cpu is woken up by some other interrupt. Its only then that the pending interrupts are replayed. This can result in device timeouts or warnings about this cpu being stuck. This patch fixes ths issue by ensuring that cpus check for pending interrupts just before entering any idle state as long as they are not in the path of split core operations. Signed-off-by: Preeti U Murthy Acked-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/idle_power7.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 2480256272d..5cf3d367190 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -131,7 +131,7 @@ _GLOBAL(power7_nap) _GLOBAL(power7_sleep) li r3,1 - li r4,0 + li r4,1 b power7_powersave_common /* No return */ -- cgit v1.2.3-70-g09d2 From f73128f4f680e8be68cda831f2710214559583cb Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 8 Jul 2014 16:08:20 +0930 Subject: powerpc/kvm: Remove redundant save of SIER AND MMCR2 These two registers are already saved in the block above. Aside from being unnecessary, by the time we get down to the second save location r8 no longer contains MMCR2, so we are clobbering the saved value with PMC5. MMCR2 primarily consists of counter freeze bits. So restoring the value of PMC5 into MMCR2 will most likely have the effect of freezing counters. Fixes: 72cde5a88d37 ("KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8") Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley Acked-by: Michael Ellerman Acked-by: Paul Mackerras Reviewed-by: Alexander Graf Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/book3s_hv_interrupts.S | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S index 8c86422a1e3..731be7478b2 100644 --- a/arch/powerpc/kvm/book3s_hv_interrupts.S +++ b/arch/powerpc/kvm/book3s_hv_interrupts.S @@ -127,11 +127,6 @@ BEGIN_FTR_SECTION stw r10, HSTATE_PMC + 24(r13) stw r11, HSTATE_PMC + 28(r13) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) -BEGIN_FTR_SECTION - mfspr r9, SPRN_SIER - std r8, HSTATE_MMCR + 40(r13) - std r9, HSTATE_MMCR + 48(r13) -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) 31: /* -- cgit v1.2.3-70-g09d2 From 4d9690dd56b0d18f2af8a9d4a279cb205aae3345 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 8 Jul 2014 16:08:21 +0930 Subject: powerpc/perf: Add PPMU_ARCH_207S define Instead of separate bits for every POWER8 PMU feature, have a single one for v2.07 of the architecture. This saves us adding a MMCR2 define for a future patch. Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley Acked-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/perf_event_server.h | 3 +-- arch/powerpc/perf/core-book3s.c | 6 +++--- arch/powerpc/perf/power8-pmu.c | 2 +- 3 files changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h index 9ed737146db..b3e936027b2 100644 --- a/arch/powerpc/include/asm/perf_event_server.h +++ b/arch/powerpc/include/asm/perf_event_server.h @@ -61,8 +61,7 @@ struct power_pmu { #define PPMU_SIAR_VALID 0x00000010 /* Processor has SIAR Valid bit */ #define PPMU_HAS_SSLOT 0x00000020 /* Has sampled slot in MMCRA */ #define PPMU_HAS_SIER 0x00000040 /* Has SIER */ -#define PPMU_BHRB 0x00000080 /* has BHRB feature enabled */ -#define PPMU_EBB 0x00000100 /* supports event based branch */ +#define PPMU_ARCH_207S 0x00000080 /* PMC is architecture v2.07S */ /* * Values for flags to get_alternatives() diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 4520c9356b5..a2ff1bda706 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -485,7 +485,7 @@ static bool is_ebb_event(struct perf_event *event) * check that the PMU supports EBB, meaning those that don't can still * use bit 63 of the event code for something else if they wish. */ - return (ppmu->flags & PPMU_EBB) && + return (ppmu->flags & PPMU_ARCH_207S) && ((event->attr.config >> PERF_EVENT_CONFIG_EBB_SHIFT) & 1); } @@ -777,7 +777,7 @@ void perf_event_print_debug(void) if (ppmu->flags & PPMU_HAS_SIER) sier = mfspr(SPRN_SIER); - if (ppmu->flags & PPMU_EBB) { + if (ppmu->flags & PPMU_ARCH_207S) { pr_info("MMCR2: %016lx EBBHR: %016lx\n", mfspr(SPRN_MMCR2), mfspr(SPRN_EBBHR)); pr_info("EBBRR: %016lx BESCR: %016lx\n", @@ -1696,7 +1696,7 @@ static int power_pmu_event_init(struct perf_event *event) if (has_branch_stack(event)) { /* PMU has BHRB enabled */ - if (!(ppmu->flags & PPMU_BHRB)) + if (!(ppmu->flags & PPMU_ARCH_207S)) return -EOPNOTSUPP; } diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c index fe2763b6e03..639cd915658 100644 --- a/arch/powerpc/perf/power8-pmu.c +++ b/arch/powerpc/perf/power8-pmu.c @@ -792,7 +792,7 @@ static struct power_pmu power8_pmu = { .get_constraint = power8_get_constraint, .get_alternatives = power8_get_alternatives, .disable_pmc = power8_disable_pmc, - .flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_BHRB | PPMU_EBB, + .flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_ARCH_207S, .n_generic = ARRAY_SIZE(power8_generic_events), .generic_events = power8_generic_events, .cache_events = &power8_cache_events, -- cgit v1.2.3-70-g09d2 From b50a6c584bb47b370f84bfd746770c0bbe7129b7 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 8 Jul 2014 16:08:22 +0930 Subject: powerpc/perf: Clear MMCR2 when enabling PMU On POWER8 when switching to a KVM guest we set bits in MMCR2 to freeze the PMU counters. Aside from on boot they are then never reset, resulting in stuck perf counters for any user in the guest or host. We now set MMCR2 to 0 whenever enabling the PMU, which provides a sane state for perf to use the PMU counters under either the guest or the host. This was manifesting as a bug with ppc64_cpu --frequency: $ sudo ppc64_cpu --frequency WARNING: couldn't run on cpu 0 WARNING: couldn't run on cpu 8 ... WARNING: couldn't run on cpu 144 WARNING: couldn't run on cpu 152 min: 18446744073.710 GHz (cpu -1) max: 0.000 GHz (cpu -1) avg: 0.000 GHz The command uses a perf counter to measure CPU cycles over a fixed amount of time, in order to approximate the frequency of the machine. The counters were returning zero once a guest was started, regardless of weather it was still running or had been shut down. By dumping the value of MMCR2, it was observed that once a guest is running MMCR2 is set to 1s - which stops counters from running: $ sudo sh -c 'echo p > /proc/sysrq-trigger' CPU: 0 PMU registers, ppmu = POWER8 n_counters = 6 PMC1: 5b635e38 PMC2: 00000000 PMC3: 00000000 PMC4: 00000000 PMC5: 1bf5a646 PMC6: 5793d378 PMC7: deadbeef PMC8: deadbeef MMCR0: 0000000080000000 MMCR1: 000000001e000000 MMCRA: 0000040000000000 MMCR2: fffffffffffffc00 EBBHR: 0000000000000000 EBBRR: 0000000000000000 BESCR: 0000000000000000 SIAR: 00000000000a51cc SDAR: c00000000fc40000 SIER: 0000000001000000 This is done unconditionally in book3s_hv_interrupts.S upon entering the guest, and the original value is only save/restored if the host has indicated it was using the PMU. This is okay, however the user of the PMU needs to ensure that it is in a defined state when it starts using it. Fixes: e05b9b9e5c10 ("powerpc/perf: Power8 PMU support") Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley Acked-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index a2ff1bda706..bae697cd592 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1300,6 +1300,9 @@ static void power_pmu_enable(struct pmu *pmu) write_mmcr0(cpuhw, mmcr0); + if (ppmu->flags & PPMU_ARCH_207S) + mtspr(SPRN_MMCR2, 0); + /* * Enable instruction sampling if necessary */ -- cgit v1.2.3-70-g09d2 From fb43e8477ed9006c4f397f904c691a120503038c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 30 Jun 2014 11:45:30 -0700 Subject: powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64 powerpc:allmodconfig has been failing for some time with the following error. arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:1312: Error: attempt to move .org backwards make[1]: *** [arch/powerpc/kernel/head_64.o] Error 1 A number of attempts to fix the problem by moving around code have been unsuccessful and resulted in failed builds for some configurations and the discovery of toolchain bugs. Fix the problem by disabling RELOCATABLE for COMPILE_TEST builds instead. While this is less than perfect, it avoids substantial code changes which would otherwise be necessary just to make COMPILE_TEST builds happy and might have undesired side effects. Signed-off-by: Guenter Roeck Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index bd6dd6ed3a9..fefe7c8bf05 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -414,7 +414,7 @@ config KEXEC config CRASH_DUMP bool "Build a kdump crash kernel" depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP) - select RELOCATABLE if PPC64 || 44x || FSL_BOOKE + select RELOCATABLE if (PPC64 && !COMPILE_TEST) || 44x || FSL_BOOKE help Build a kernel suitable for use as a kdump capture kernel. The same kernel binary can be used as production kernel and dump @@ -1017,6 +1017,7 @@ endmenu if PPC64 config RELOCATABLE bool "Build a relocatable kernel" + depends on !COMPILE_TEST select NONSTATIC_KERNEL help This builds a kernel image that is capable of running anywhere -- cgit v1.2.3-70-g09d2 From f56029410a13cae3652d1f34788045c40a13ffc7 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 29 May 2014 08:15:38 +1000 Subject: powerpc/perf: Never program book3s PMCs with values >= 0x80000000 We are seeing a lot of PMU warnings on POWER8: Can't find PMC that caused IRQ Looking closer, the active PMC is 0 at this point and we took a PMU exception on the transition from negative to 0. Some versions of POWER8 have an issue where they edge detect and not level detect PMC overflows. A number of places program the PMC with (0x80000000 - period_left), where period_left can be negative. We can either fix all of these or just ensure that period_left is always >= 1. This patch takes the second option. Cc: Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index bae697cd592..6b0641c3f03 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -996,7 +996,22 @@ static void power_pmu_read(struct perf_event *event) } while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev); local64_add(delta, &event->count); - local64_sub(delta, &event->hw.period_left); + + /* + * A number of places program the PMC with (0x80000000 - period_left). + * We never want period_left to be less than 1 because we will program + * the PMC with a value >= 0x800000000 and an edge detected PMC will + * roll around to 0 before taking an exception. We have seen this + * on POWER8. + * + * To fix this, clamp the minimum value of period_left to 1. + */ + do { + prev = local64_read(&event->hw.period_left); + val = prev - delta; + if (val < 1) + val = 1; + } while (local64_cmpxchg(&event->hw.period_left, prev, val) != prev); } /* -- cgit v1.2.3-70-g09d2 From 5bc8c7cdeb6e3d9c1b938b4029d9a22f8dc5cd9d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 10 Jul 2014 18:03:17 +0200 Subject: m68k: Export mach_random_get_entropy to modules When a module calls random_get_entropy(): ERROR: "mach_random_get_entropy" [crypto/drbg.ko] undefined! make[1]: *** [__modpost] Error 1 Signed-off-by: Geert Uytterhoeven --- arch/m68k/kernel/time.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index 958f1adb9d0..3857737e395 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -11,6 +11,7 @@ */ #include +#include #include #include #include @@ -30,6 +31,7 @@ unsigned long (*mach_random_get_entropy)(void); +EXPORT_SYMBOL_GPL(mach_random_get_entropy); /* -- cgit v1.2.3-70-g09d2 From f9ae9cf5d72b3926ca48ea60e15bdbb840f42372 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 11 Jul 2014 13:55:40 -0400 Subject: ext4: revert commit which was causing fs corruption after journal replays Commit 007649375f6af2 ("ext4: initialize multi-block allocator before checking block descriptors") causes the block group descriptor's count of the number of free blocks to become inconsistent with the number of free blocks in the allocation bitmap. This is a harmless form of fs corruption, but it causes the kernel to potentially remount the file system read-only, or to panic, depending on the file systems's error behavior. Thanks to Eric Whitney for his tireless work to reproduce and to find the guilty commit. Fixes: 007649375f6af2 ("ext4: initialize multi-block allocator before checking block descriptors" Cc: stable@vger.kernel.org # 3.15 Reported-by: David Jander Reported-by: Matteo Croce Tested-by: Eric Whitney Suggested-by: Eric Whitney Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 51 ++++++++++++++++++++++++--------------------------- 1 file changed, 24 insertions(+), 27 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 6297c07c937..6df7bc611db 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3879,38 +3879,19 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) goto failed_mount2; } } - - /* - * set up enough so that it can read an inode, - * and create new inode for buddy allocator - */ - sbi->s_gdb_count = db_count; - if (!test_opt(sb, NOLOAD) && - EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) - sb->s_op = &ext4_sops; - else - sb->s_op = &ext4_nojournal_sops; - - ext4_ext_init(sb); - err = ext4_mb_init(sb); - if (err) { - ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)", - err); - goto failed_mount2; - } - if (!ext4_check_descriptors(sb, &first_not_zeroed)) { ext4_msg(sb, KERN_ERR, "group descriptors corrupted!"); - goto failed_mount2a; + goto failed_mount2; } if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) if (!ext4_fill_flex_info(sb)) { ext4_msg(sb, KERN_ERR, "unable to initialize " "flex_bg meta info!"); - goto failed_mount2a; + goto failed_mount2; } + sbi->s_gdb_count = db_count; get_random_bytes(&sbi->s_next_generation, sizeof(u32)); spin_lock_init(&sbi->s_next_gen_lock); @@ -3945,6 +3926,14 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) sbi->s_stripe = ext4_get_stripe_size(sbi); sbi->s_extent_max_zeroout_kb = 32; + /* + * set up enough so that it can read an inode + */ + if (!test_opt(sb, NOLOAD) && + EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) + sb->s_op = &ext4_sops; + else + sb->s_op = &ext4_nojournal_sops; sb->s_export_op = &ext4_export_ops; sb->s_xattr = ext4_xattr_handlers; #ifdef CONFIG_QUOTA @@ -4134,13 +4123,21 @@ no_journal: if (err) { ext4_msg(sb, KERN_ERR, "failed to reserve %llu clusters for " "reserved pool", ext4_calculate_resv_clusters(sb)); - goto failed_mount5; + goto failed_mount4a; } err = ext4_setup_system_zone(sb); if (err) { ext4_msg(sb, KERN_ERR, "failed to initialize system " "zone (%d)", err); + goto failed_mount4a; + } + + ext4_ext_init(sb); + err = ext4_mb_init(sb); + if (err) { + ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)", + err); goto failed_mount5; } @@ -4217,8 +4214,11 @@ failed_mount8: failed_mount7: ext4_unregister_li_request(sb); failed_mount6: - ext4_release_system_zone(sb); + ext4_mb_release(sb); failed_mount5: + ext4_ext_release(sb); + ext4_release_system_zone(sb); +failed_mount4a: dput(sb->s_root); sb->s_root = NULL; failed_mount4: @@ -4242,14 +4242,11 @@ failed_mount3: percpu_counter_destroy(&sbi->s_extent_cache_cnt); if (sbi->s_mmp_tsk) kthread_stop(sbi->s_mmp_tsk); -failed_mount2a: - ext4_mb_release(sb); failed_mount2: for (i = 0; i < db_count; i++) brelse(sbi->s_group_desc[i]); ext4_kvfree(sbi->s_group_desc); failed_mount: - ext4_ext_release(sb); if (sbi->s_chksum_driver) crypto_free_shash(sbi->s_chksum_driver); if (sbi->s_proc) { -- cgit v1.2.3-70-g09d2 From 8bec751bd63847b4044aab8b215db52aa6abde61 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Thu, 10 Jul 2014 22:36:46 -0400 Subject: serial: imx: Fix build breakage Fix breakage introduced by commit c557d392fbf5badd693ea1946a4317c87a26a716, 'serial: Test for no tx data on tx restart'. Reported-by: Stephen Rothwell Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 56bd9aa5615..044e86d528a 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -567,7 +567,7 @@ static void imx_start_tx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; - if (uart_circ_empty(&port.state->xmit)) + if (uart_circ_empty(&port->state->xmit)) return; if (USE_IRDA(sport)) { -- cgit v1.2.3-70-g09d2 From 34c4eda809e1efb16c554c07bb5df4c8ace9424e Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 11 Jul 2014 11:11:08 +0200 Subject: serial: sh-sci: Add device tree support for r8a7{778,740,3a4} and sh73a0 Simply document new compat strings. There appears to be no need for a driver updates. Signed-off-by: Simon Horman Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 64fd7dec1bb..b3556609a06 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -4,6 +4,13 @@ Required properties: - compatible: Must contain one of the following: + - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. + - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. + - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART. + - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART. + - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART. + - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART. + - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. -- cgit v1.2.3-70-g09d2 From d8279a40e50ad55539780aa617a32a53d7f0953e Mon Sep 17 00:00:00 2001 From: Michal Sojka Date: Thu, 10 Jul 2014 14:00:34 +0200 Subject: USB: serial: ftdi_sio: Add Infineon Triboard This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a Signed-off-by: Michal Sojka Cc: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index bf2e30a6824..8a3813be1b2 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -945,6 +945,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) }, { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) }, { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) }, + /* Infineon Devices */ + { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 106cc16cc6e..c4777bc6aee 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -583,6 +583,12 @@ #define RATOC_VENDOR_ID 0x0584 #define RATOC_PRODUCT_ID_USB60F 0xb020 +/* + * Infineon Technologies + */ +#define INFINEON_VID 0x058b +#define INFINEON_TRIBOARD_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */ + /* * Acton Research Corp. */ -- cgit v1.2.3-70-g09d2 From 9820ccba4b1e9c0cdacf254a7be8616357086ebc Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 10 Jul 2014 11:54:59 +0530 Subject: phy: sun4i: depend on RESET_CONTROLLER The driver depend on the reset framework in a mandatory way. Make sure reset_control_get is defined by adding this dependency in Kconfig Signed-off-by: Maxime Ripard Reported-by: Arnd Bergmann Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 16a2f067c24..1d8099a56a9 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -112,6 +112,7 @@ config PHY_EXYNOS5250_SATA config PHY_SUN4I_USB tristate "Allwinner sunxi SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on RESET_CONTROLLER select GENERIC_PHY help Enable this to support the transceiver that is part of Allwinner -- cgit v1.2.3-70-g09d2 From 3df9fcd59fd829da046ca63518ad8e51482a39e0 Mon Sep 17 00:00:00 2001 From: Himangi Saraogi Date: Thu, 10 Jul 2014 11:55:00 +0530 Subject: phy: omap-usb2: fix devm_ioremap_resource error detection code devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // Signed-off-by: Himangi Saraogi Acked-by: Julia Lawall Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-omap-usb2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 7007c11fe07..2063d542b4e 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -233,8 +233,8 @@ static int omap_usb2_probe(struct platform_device *pdev) if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { res = platform_get_resource(pdev, IORESOURCE_MEM, 0); phy->phy_base = devm_ioremap_resource(&pdev->dev, res); - if (!phy->phy_base) - return -ENOMEM; + if (IS_ERR(phy->phy_base)) + return PTR_ERR(phy->phy_base); phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; } -- cgit v1.2.3-70-g09d2 From bf5baf954a8249ad565862faa98accb19f3ab957 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Thu, 10 Jul 2014 11:55:01 +0530 Subject: drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE Allow phy-exynos-usb2 to be autoloaded based on devicetree information. Tested on Odroid X2 with its USB subsystem build as modules. Signed-off-by: Sjoerd Simons Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-samsung-usb2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c index 8a8c6bc8709..1e69a32c221 100644 --- a/drivers/phy/phy-samsung-usb2.c +++ b/drivers/phy/phy-samsung-usb2.c @@ -107,6 +107,7 @@ static const struct of_device_id samsung_usb2_phy_of_match[] = { #endif { }, }; +MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match); static int samsung_usb2_phy_probe(struct platform_device *pdev) { -- cgit v1.2.3-70-g09d2 From e73b49f1c4e75c44d62585cc3e5b9c7894b61c32 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 10 Jul 2014 11:55:02 +0530 Subject: phy: core: Fix error path in phy_create() Prevent resources from being freed twice in case device_add() call fails within phy_create(). Also use ida_simple_remove() instead of ida_remove() as we had used ida_simple_get() to allocate the ida. Cc: 3.13+ # 3.13+ Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index c64a2f3b2d6..49c44653010 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -614,8 +614,9 @@ struct phy *phy_create(struct device *dev, const struct phy_ops *ops, return phy; put_dev: - put_device(&phy->dev); - ida_remove(&phy_ida, phy->id); + put_device(&phy->dev); /* calls phy_release() which frees resources */ + return ERR_PTR(ret); + free_phy: kfree(phy); return ERR_PTR(ret); @@ -799,7 +800,7 @@ static void phy_release(struct device *dev) phy = to_phy(dev); dev_vdbg(dev, "releasing '%s'\n", dev_name(dev)); - ida_remove(&phy_ida, phy->id); + ida_simple_remove(&phy_ida, phy->id); kfree(phy); } -- cgit v1.2.3-70-g09d2 From eb82a3d846fab00c4b9ad6bbe5ade4fa5febc0af Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 10 Jul 2014 11:55:03 +0530 Subject: phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove If probe fails then we need to call pm_runtime_disable() to balance out the previous pm_runtime_enable() call. Else it will cause unbalanced pm_runtime_enable() call in the succeding probe call. This anomaly was observed when the call to devm_phy_create() failed with -EPROBE_DEFER. Balance out the pm_runtime_enable() call in .remove() as well. Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-omap-usb2.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 2063d542b4e..34b396146c8 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -262,7 +262,6 @@ static int omap_usb2_probe(struct platform_device *pdev) otg->phy = &phy->phy; platform_set_drvdata(pdev, phy); - pm_runtime_enable(phy->dev); generic_phy = devm_phy_create(phy->dev, &ops, NULL); if (IS_ERR(generic_phy)) @@ -270,10 +269,13 @@ static int omap_usb2_probe(struct platform_device *pdev) phy_set_drvdata(generic_phy, phy); + pm_runtime_enable(phy->dev); phy_provider = devm_of_phy_provider_register(phy->dev, of_phy_simple_xlate); - if (IS_ERR(phy_provider)) + if (IS_ERR(phy_provider)) { + pm_runtime_disable(phy->dev); return PTR_ERR(phy_provider); + } phy->wkupclk = devm_clk_get(phy->dev, "wkupclk"); if (IS_ERR(phy->wkupclk)) { @@ -317,6 +319,7 @@ static int omap_usb2_remove(struct platform_device *pdev) if (!IS_ERR(phy->optclk)) clk_unprepare(phy->optclk); usb_remove_phy(&phy->phy); + pm_runtime_disable(phy->dev); return 0; } -- cgit v1.2.3-70-g09d2 From 363d4ddc17320ad0906778924d40ba5955ccf194 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Fri, 11 Jul 2014 18:34:56 +0200 Subject: ARM: at91: at91sam9x5: add clocks for usb device Add clocks for usb device, or else switch to CCF, the gadget won't work. Reported-by: Jiri Prchal Signed-off-by: Bo Shen Acked-by: Alexandre Belloni Tested-by: Jiri Prchal Signed-off-by: Nicolas Ferre Signed-off-by: Olof Johansson --- arch/arm/boot/dts/at91sam9x5.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index d6133f49720..2ebc42140ea 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1045,6 +1045,8 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&usb>, <&udphs_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; ep0 { -- cgit v1.2.3-70-g09d2 From c8c3f7d621c1dd803e92d4cdd59e2f730be71a2b Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sat, 12 Jul 2014 09:54:52 -0700 Subject: Documentation/Changes: clean up mcelog paragraph The paragraph on mcelog currently describes kernel v2.6.31. In that kernel the mce code (for i386, that is) was in transition. Ever since v2.6.32 the situation is much simpler (eg, mcelog is now needed to process events on almost all x86 machines, i386 and x86-64). Since this "document is designed to provide a list of the minimum levels of software necessary to run the 3.0 kernels" let's just describe that situation. Signed-off-by: Paul Bolle Acked-by: Andi Kleen Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/Changes | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/Documentation/Changes b/Documentation/Changes index 2254db0f00a..227bec88021 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -280,12 +280,9 @@ that is possible. mcelog ------ -In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility -as a regular cronjob similar to the x86-64 kernel to process and log -machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check -events are errors reported by the CPU. Processing them is strongly encouraged. -All x86-64 kernels since 2.6.4 require the mcelog utility to -process machine checks. +On x86 kernels the mcelog utility is needed to process and log machine check +events when CONFIG_X86_MCE is enabled. Machine check events are errors reported +by the CPU. Processing them is strongly encouraged. Getting updated software ======================== -- cgit v1.2.3-70-g09d2 From cbb4d3e6510b99522719c5ef0cd0482886a324c0 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Sat, 12 Jul 2014 09:55:03 -0700 Subject: scripts/kernel-doc: handle object-like macros Object-like macros are different than function-like macros: https://gcc.gnu.org/onlinedocs/cpp/Object-like-Macros.html https://gcc.gnu.org/onlinedocs/cpp/Function-like-Macros.html They are not parsed correctly, generating invalid intermediate files (xmls) for cases like: #define BIT_MASK (0xFF << BIT_SHIFT) where "OxFF <<" is considered to be parameter type. When parsing, we can differentiate beween these two types of macros by checking whether there is at least one whitespace b/w "#define" and first opening parenthesis. Signed-off-by: Horia Geanta Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- scripts/kernel-doc | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/scripts/kernel-doc b/scripts/kernel-doc index da058da413e..16a07cfa4d3 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -2073,6 +2073,7 @@ sub check_return_section { sub dump_function($$) { my $prototype = shift; my $file = shift; + my $noret = 0; $prototype =~ s/^static +//; $prototype =~ s/^extern +//; @@ -2086,7 +2087,7 @@ sub dump_function($$) { $prototype =~ s/__init_or_module +//; $prototype =~ s/__must_check +//; $prototype =~ s/__weak +//; - $prototype =~ s/^#\s*define\s+//; #ak added + my $define = $prototype =~ s/^#\s*define\s+//; #ak added $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//; # Yes, this truly is vile. We are looking for: @@ -2105,7 +2106,15 @@ sub dump_function($$) { # - atomic_set (macro) # - pci_match_device, __copy_to_user (long return type) - if ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || + if ($define && $prototype =~ m/^()([a-zA-Z0-9_~:]+)\s+/) { + # This is an object-like macro, it has no return type and no parameter + # list. + # Function-like macros are not allowed to have spaces between + # declaration_name and opening parenthesis (notice the \s+). + $return_type = $1; + $declaration_name = $2; + $noret = 1; + } elsif ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || $prototype =~ m/^(\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || $prototype =~ m/^(\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || $prototype =~ m/^(\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || @@ -2140,7 +2149,7 @@ sub dump_function($$) { # of warnings goes sufficiently down, the check is only performed in # verbose mode. # TODO: always perform the check. - if ($verbose) { + if ($verbose && !$noret) { check_return_section($file, $declaration_name, $return_type); } -- cgit v1.2.3-70-g09d2 From 8011b3c96f393b7ae95a6fd80e1634626c1b95ab Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sat, 12 Jul 2014 09:55:15 -0700 Subject: DocBook: fix mtdnand typos This patch fixed spelling typo found in DocBook/mtdnand.tmpl. Signed-off-by: Masanari Iida Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/DocBook/mtdnand.tmpl | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index cd11926e07c..7da8f0402af 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -91,7 +91,7 @@ [MTD Interface] These functions provide the interface to the MTD kernel API. - They are not replacable and provide functionality + They are not replaceable and provide functionality which is complete hardware independent. @@ -100,14 +100,14 @@ [GENERIC] - Generic functions are not replacable and provide functionality + Generic functions are not replaceable and provide functionality which is complete hardware independent. [DEFAULT] Default functions provide hardware related functionality which is suitable for most of the implementations. These functions can be replaced by the - board driver if neccecary. Those functions are called via pointers in the + board driver if necessary. Those functions are called via pointers in the NAND chip description structure. The board driver can set the functions which should be replaced by board dependent functions before calling nand_scan(). If the function pointer is NULL on entry to nand_scan() then the pointer @@ -264,7 +264,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd) is set up nand_scan() is called. This function tries to detect and identify then chip. If a chip is found all the internal data fields are initialized accordingly. - The structure(s) have to be zeroed out first and then filled with the neccecary + The structure(s) have to be zeroed out first and then filled with the necessary information about the device. @@ -327,7 +327,7 @@ module_init(board_init); Exit function - The exit function is only neccecary if the driver is + The exit function is only necessary if the driver is compiled as a module. It releases all resources which are held by the chip driver and unregisters the partitions in the MTD layer. @@ -494,7 +494,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) in this case. See rts_from4.c and diskonchip.c for implementation reference. In those cases we must also use bad block tables on FLASH, because the ECC layout is - interferring with the bad block marker positions. + interfering with the bad block marker positions. See bad block table support for details. @@ -542,7 +542,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) nand_scan() calls the function nand_default_bbt(). nand_default_bbt() selects appropriate default - bad block table desriptors depending on the chip information + bad block table descriptors depending on the chip information which was retrieved by nand_scan(). @@ -554,7 +554,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) Flash based tables - It may be desired or neccecary to keep a bad block table in FLASH. + It may be desired or necessary to keep a bad block table in FLASH. For AG-AND chips this is mandatory, as they have no factory marked bad blocks. They have factory marked good blocks. The marker pattern is erased when the block is erased to be reused. So in case of @@ -565,10 +565,10 @@ static void board_select_chip (struct mtd_info *mtd, int chip) of the blocks. - The blocks in which the tables are stored are procteted against + The blocks in which the tables are stored are protected against accidental access by marking them bad in the memory bad block table. The bad block table management functions are allowed - to circumvernt this protection. + to circumvent this protection. The simplest way to activate the FLASH based bad block table support @@ -592,7 +592,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) User defined tables are created by filling out a nand_bbt_descr structure and storing the pointer in the nand_chip structure member bbt_td before calling nand_scan(). - If a mirror table is neccecary a second structure must be + If a mirror table is necessary a second structure must be created and a pointer to this structure must be stored in bbt_md inside the nand_chip structure. If the bbt_md member is set to NULL then only the main table is used @@ -666,7 +666,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) For automatic placement some blocks must be reserved for bad block table storage. The number of reserved blocks is defined - in the maxblocks member of the babd block table description structure. + in the maxblocks member of the bad block table description structure. Reserving 4 blocks for mirrored tables should be a reasonable number. This also limits the number of blocks which are scanned for the bad block table ident pattern. @@ -1068,11 +1068,11 @@ in this page Filesystem support - The NAND driver provides all neccecary functions for a + The NAND driver provides all necessary functions for a filesystem via the MTD interface. - Filesystems must be aware of the NAND pecularities and + Filesystems must be aware of the NAND peculiarities and restrictions. One major restrictions of NAND Flash is, that you cannot write as often as you want to a page. The consecutive writes to a page, before erasing it again, are restricted to 1-3 writes, depending on the @@ -1222,7 +1222,7 @@ in this page #define NAND_BBT_VERSION 0x00000100 /* Create a bbt if none axists */ #define NAND_BBT_CREATE 0x00000200 -/* Write bbt if neccecary */ +/* Write bbt if necessary */ #define NAND_BBT_WRITE 0x00001000 /* Read and write back block contents when writing bbt */ #define NAND_BBT_SAVECONTENT 0x00002000 -- cgit v1.2.3-70-g09d2 From 0ba4f6e4006634cf566ba9cc3acd40aebee44503 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sat, 12 Jul 2014 09:55:28 -0700 Subject: DocBook: fix various typos This patch fixed spelling typo in various template files within Documentation/Docbook. Signed-off-by: Masanari Iida Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/DocBook/gadget.tmpl | 2 +- Documentation/DocBook/genericirq.tmpl | 4 ++-- Documentation/DocBook/kernel-locking.tmpl | 2 +- Documentation/DocBook/libata.tmpl | 6 +++--- Documentation/DocBook/media_api.tmpl | 2 +- Documentation/DocBook/regulator.tmpl | 2 +- Documentation/DocBook/uio-howto.tmpl | 4 ++-- Documentation/DocBook/usb.tmpl | 2 +- Documentation/DocBook/writing-an-alsa-driver.tmpl | 2 +- 9 files changed, 13 insertions(+), 13 deletions(-) diff --git a/Documentation/DocBook/gadget.tmpl b/Documentation/DocBook/gadget.tmpl index 4017f147ba2..2c425d70f7e 100644 --- a/Documentation/DocBook/gadget.tmpl +++ b/Documentation/DocBook/gadget.tmpl @@ -708,7 +708,7 @@ hardware level details could be very different. Systems need specialized hardware support to implement OTG, notably including a special Mini-AB jack -and associated transciever to support Dual-Role +and associated transceiver to support Dual-Role operation: they can act either as a host, using the standard Linux-USB host side driver stack, diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl index 46347f60335..59fb5c07754 100644 --- a/Documentation/DocBook/genericirq.tmpl +++ b/Documentation/DocBook/genericirq.tmpl @@ -182,7 +182,7 @@ Each interrupt is described by an interrupt descriptor structure irq_desc. The interrupt is referenced by an 'unsigned int' numeric - value which selects the corresponding interrupt decription structure + value which selects the corresponding interrupt description structure in the descriptor structures array. The descriptor structure contains status information and pointers to the interrupt flow method and the interrupt chip structure @@ -470,7 +470,7 @@ if (desc->irq_data.chip->irq_eoi) To avoid copies of identical implementations of IRQ chips the core provides a configurable generic interrupt chip - implementation. Developers should check carefuly whether the + implementation. Developers should check carefully whether the generic chip fits their needs before implementing the same functionality slightly differently themselves. diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl index 19f2a5a5a5b..e584ee12a1e 100644 --- a/Documentation/DocBook/kernel-locking.tmpl +++ b/Documentation/DocBook/kernel-locking.tmpl @@ -1760,7 +1760,7 @@ as it would be on UP. -There is a furthur optimization possible here: remember our original +There is a further optimization possible here: remember our original cache code, where there were no reference counts and the caller simply held the lock whenever using the object? This is still possible: if you hold the lock, no one can delete the object, so you don't need to diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index deb71baed32..d7fcdc5a437 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -677,7 +677,7 @@ and other resources, etc. - ATA_QCFLAG_ACTIVE is clared from qc->flags. + ATA_QCFLAG_ACTIVE is cleared from qc->flags. @@ -708,7 +708,7 @@ and other resources, etc. - qc->waiting is claread & completed (in that order). + qc->waiting is cleared & completed (in that order). @@ -1163,7 +1163,7 @@ and other resources, etc. Once sense data is acquired, this type of errors can be - handled similary to other SCSI errors. Note that sense data + handled similarly to other SCSI errors. Note that sense data may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR && ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such cases, the error should be considered as an ATA bus error and diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index 4decb46bfa7..03f9a1f8d41 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -68,7 +68,7 @@ several digital tv standards. While it is called as DVB API, in fact it covers several different video standards including DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated - to documment support also for DVB-S2, ISDB-T and ISDB-S. + to document support also for DVB-S2, ISDB-T and ISDB-S. The third part covers the Remote Controller API. The fourth part covers the Media Controller API. For additional information and for the latest development code, diff --git a/Documentation/DocBook/regulator.tmpl b/Documentation/DocBook/regulator.tmpl index 346e552fa2c..3b08a085d2c 100644 --- a/Documentation/DocBook/regulator.tmpl +++ b/Documentation/DocBook/regulator.tmpl @@ -155,7 +155,7 @@ release regulators. Functions are provided to enable and disable the - reguator and to get and set the runtime parameters of the + regulator and to get and set the runtime parameters of the regulator. diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index 95618159e29..bbe9c1fd5ce 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -766,10 +766,10 @@ framework to set up sysfs files for this region. Simply leave it alone. The dynamic memory regions will be allocated when the UIO device file, /dev/uioX is opened. - Simiar to static memory resources, the memory region information for + Similar to static memory resources, the memory region information for dynamic regions is then visible via sysfs at /sys/class/uio/uioX/maps/mapY/*. - The dynmaic memory regions will be freed when the UIO device file is + The dynamic memory regions will be freed when the UIO device file is closed. When no processes are holding the device file open, the address returned to userspace is ~0. diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index 8d57c1888dc..85fc0e28576 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl @@ -153,7 +153,7 @@ The Linux USB API supports synchronous calls for control and bulk messages. - It also supports asynchnous calls for all kinds of data transfer, + It also supports asynchronous calls for all kinds of data transfer, using request structures called "URBs" (USB Request Blocks). diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl index d0056a4e9c5..6f639d9530b 100644 --- a/Documentation/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl @@ -5696,7 +5696,7 @@ struct _snd_pcm_runtime { suspending the PCM operations via snd_pcm_suspend_all() or snd_pcm_suspend(). It means that the PCM - streams are already stoppped when the register snapshot is + streams are already stopped when the register snapshot is taken. But, remember that you don't have to restart the PCM stream in the resume callback. It'll be restarted via trigger call with SNDRV_PCM_TRIGGER_RESUME -- cgit v1.2.3-70-g09d2 From 3a57cc5f1935d824c36264e0fa888d7d6a9038c0 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 12 Jul 2014 09:56:22 -0700 Subject: Documenation/laptops: rename and update hpfall.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dell kernel driver dell-smo8800 provides same freefall interface as hp_accel so program hpfall.c works also on Dell laptops. So rename it to freefall.c. Dell driver does not provide hp::hddprotect led so make sure that freefall.c works also if hp::hddprotect does not exist in sysfs. Additionally write info to syslog. Signed-off-by: Pali Rohár Cc: Sonal Santan Acked-by: Pavel Machek Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/laptops/00-INDEX | 4 +- Documentation/laptops/freefall.c | 177 +++++++++++++++++++++++++++++++++++++++ Documentation/laptops/hpfall.c | 146 -------------------------------- 3 files changed, 179 insertions(+), 148 deletions(-) create mode 100644 Documentation/laptops/freefall.c delete mode 100644 Documentation/laptops/hpfall.c diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX index d13b9a9a9e0..d399ae1fc72 100644 --- a/Documentation/laptops/00-INDEX +++ b/Documentation/laptops/00-INDEX @@ -8,8 +8,8 @@ disk-shock-protection.txt - information on hard disk shock protection. dslm.c - Simple Disk Sleep Monitor program -hpfall.c - - (HP) laptop accelerometer program for disk protection. +freefall.c + - (HP/DELL) laptop accelerometer program for disk protection. laptop-mode.txt - how to conserve battery power using laptop-mode. sony-laptop.txt diff --git a/Documentation/laptops/freefall.c b/Documentation/laptops/freefall.c new file mode 100644 index 00000000000..aab2ff09e86 --- /dev/null +++ b/Documentation/laptops/freefall.c @@ -0,0 +1,177 @@ +/* Disk protection for HP/DELL machines. + * + * Copyright 2008 Eric Piel + * Copyright 2009 Pavel Machek + * Copyright 2012 Sonal Santan + * Copyright 2014 Pali Rohár + * + * GPLv2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int noled; +static char unload_heads_path[64]; +static char device_path[32]; +static const char app_name[] = "FREE FALL"; + +static int set_unload_heads_path(char *device) +{ + char devname[64]; + + if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0) + return -EINVAL; + strncpy(devname, device + 5, sizeof(devname) - 1); + strncpy(device_path, device, sizeof(device_path) - 1); + + snprintf(unload_heads_path, sizeof(unload_heads_path) - 1, + "/sys/block/%s/device/unload_heads", devname); + return 0; +} + +static int valid_disk(void) +{ + int fd = open(unload_heads_path, O_RDONLY); + + if (fd < 0) { + perror(unload_heads_path); + return 0; + } + + close(fd); + return 1; +} + +static void write_int(char *path, int i) +{ + char buf[1024]; + int fd = open(path, O_RDWR); + + if (fd < 0) { + perror("open"); + exit(1); + } + + sprintf(buf, "%d", i); + + if (write(fd, buf, strlen(buf)) != strlen(buf)) { + perror("write"); + exit(1); + } + + close(fd); +} + +static void set_led(int on) +{ + if (noled) + return; + write_int("/sys/class/leds/hp::hddprotect/brightness", on); +} + +static void protect(int seconds) +{ + const char *str = (seconds == 0) ? "Unparked" : "Parked"; + + write_int(unload_heads_path, seconds*1000); + syslog(LOG_INFO, "%s %s disk head\n", str, device_path); +} + +static int on_ac(void) +{ + /* /sys/class/power_supply/AC0/online */ + return 1; +} + +static int lid_open(void) +{ + /* /proc/acpi/button/lid/LID/state */ + return 1; +} + +static void ignore_me(int signum) +{ + protect(0); + set_led(0); +} + +int main(int argc, char **argv) +{ + int fd, ret; + struct stat st; + struct sched_param param; + + if (argc == 1) + ret = set_unload_heads_path("/dev/sda"); + else if (argc == 2) + ret = set_unload_heads_path(argv[1]); + else + ret = -EINVAL; + + if (ret || !valid_disk()) { + fprintf(stderr, "usage: %s (default: /dev/sda)\n", + argv[0]); + exit(1); + } + + fd = open("/dev/freefall", O_RDONLY); + if (fd < 0) { + perror("/dev/freefall"); + return EXIT_FAILURE; + } + + if (stat("/sys/class/leds/hp::hddprotect/brightness", &st)) + noled = 1; + + if (daemon(0, 0) != 0) { + perror("daemon"); + return EXIT_FAILURE; + } + + openlog(app_name, LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1); + + param.sched_priority = sched_get_priority_max(SCHED_FIFO); + sched_setscheduler(0, SCHED_FIFO, ¶m); + mlockall(MCL_CURRENT|MCL_FUTURE); + + signal(SIGALRM, ignore_me); + + for (;;) { + unsigned char count; + + ret = read(fd, &count, sizeof(count)); + alarm(0); + if ((ret == -1) && (errno == EINTR)) { + /* Alarm expired, time to unpark the heads */ + continue; + } + + if (ret != sizeof(count)) { + perror("read"); + break; + } + + protect(21); + set_led(1); + if (1 || on_ac() || lid_open()) + alarm(2); + else + alarm(20); + } + + closelog(); + close(fd); + return EXIT_SUCCESS; +} diff --git a/Documentation/laptops/hpfall.c b/Documentation/laptops/hpfall.c deleted file mode 100644 index b85dbbac049..00000000000 --- a/Documentation/laptops/hpfall.c +++ /dev/null @@ -1,146 +0,0 @@ -/* Disk protection for HP machines. - * - * Copyright 2008 Eric Piel - * Copyright 2009 Pavel Machek - * - * GPLv2. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -char unload_heads_path[64]; - -int set_unload_heads_path(char *device) -{ - char devname[64]; - - if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0) - return -EINVAL; - strncpy(devname, device + 5, sizeof(devname)); - - snprintf(unload_heads_path, sizeof(unload_heads_path) - 1, - "/sys/block/%s/device/unload_heads", devname); - return 0; -} -int valid_disk(void) -{ - int fd = open(unload_heads_path, O_RDONLY); - if (fd < 0) { - perror(unload_heads_path); - return 0; - } - - close(fd); - return 1; -} - -void write_int(char *path, int i) -{ - char buf[1024]; - int fd = open(path, O_RDWR); - if (fd < 0) { - perror("open"); - exit(1); - } - sprintf(buf, "%d", i); - if (write(fd, buf, strlen(buf)) != strlen(buf)) { - perror("write"); - exit(1); - } - close(fd); -} - -void set_led(int on) -{ - write_int("/sys/class/leds/hp::hddprotect/brightness", on); -} - -void protect(int seconds) -{ - write_int(unload_heads_path, seconds*1000); -} - -int on_ac(void) -{ -// /sys/class/power_supply/AC0/online -} - -int lid_open(void) -{ -// /proc/acpi/button/lid/LID/state -} - -void ignore_me(void) -{ - protect(0); - set_led(0); -} - -int main(int argc, char **argv) -{ - int fd, ret; - struct sched_param param; - - if (argc == 1) - ret = set_unload_heads_path("/dev/sda"); - else if (argc == 2) - ret = set_unload_heads_path(argv[1]); - else - ret = -EINVAL; - - if (ret || !valid_disk()) { - fprintf(stderr, "usage: %s (default: /dev/sda)\n", - argv[0]); - exit(1); - } - - fd = open("/dev/freefall", O_RDONLY); - if (fd < 0) { - perror("/dev/freefall"); - return EXIT_FAILURE; - } - - daemon(0, 0); - param.sched_priority = sched_get_priority_max(SCHED_FIFO); - sched_setscheduler(0, SCHED_FIFO, ¶m); - mlockall(MCL_CURRENT|MCL_FUTURE); - - signal(SIGALRM, ignore_me); - - for (;;) { - unsigned char count; - - ret = read(fd, &count, sizeof(count)); - alarm(0); - if ((ret == -1) && (errno == EINTR)) { - /* Alarm expired, time to unpark the heads */ - continue; - } - - if (ret != sizeof(count)) { - perror("read"); - break; - } - - protect(21); - set_led(1); - if (1 || on_ac() || lid_open()) - alarm(2); - else - alarm(20); - } - - close(fd); - return EXIT_SUCCESS; -} -- cgit v1.2.3-70-g09d2 From 3f1f9b851311a76226140b55b1ea22111234a7c2 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 12 Jul 2014 15:32:24 -0400 Subject: ext4: fix a potential deadlock in __ext4_es_shrink() This fixes the following lockdep complaint: [ INFO: possible circular locking dependency detected ] 3.16.0-rc2-mm1+ #7 Tainted: G O ------------------------------------------------------- kworker/u24:0/4356 is trying to acquire lock: (&(&sbi->s_es_lru_lock)->rlock){+.+.-.}, at: [] __ext4_es_shrink+0x4f/0x2e0 but task is already holding lock: (&ei->i_es_lock){++++-.}, at: [] ext4_es_insert_extent+0x71/0x180 which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); *** DEADLOCK *** 6 locks held by kworker/u24:0/4356: #0: ("writeback"){.+.+.+}, at: [] process_one_work+0x180/0x560 #1: ((&(&wb->dwork)->work)){+.+.+.}, at: [] process_one_work+0x180/0x560 #2: (&type->s_umount_key#22){++++++}, at: [] grab_super_passive+0x44/0x90 #3: (jbd2_handle){+.+...}, at: [] start_this_handle+0x189/0x5f0 #4: (&ei->i_data_sem){++++..}, at: [] ext4_map_blocks+0x132/0x550 #5: (&ei->i_es_lock){++++-.}, at: [] ext4_es_insert_extent+0x71/0x180 stack backtrace: CPU: 0 PID: 4356 Comm: kworker/u24:0 Tainted: G O 3.16.0-rc2-mm1+ #7 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: writeback bdi_writeback_workfn (flush-253:0) ffffffff8213dce0 ffff880014b07538 ffffffff815df0bb 0000000000000007 ffffffff8213e040 ffff880014b07588 ffffffff815db3dd ffff880014b07568 ffff880014b07610 ffff88003b868930 ffff88003b868908 ffff88003b868930 Call Trace: [] dump_stack+0x4e/0x68 [] print_circular_bug+0x1fb/0x20c [] __lock_acquire+0x163e/0x1d00 [] ? retint_restore_args+0xe/0xe [] ? __slab_alloc+0x4a8/0x4ce [] ? __ext4_es_shrink+0x4f/0x2e0 [] lock_acquire+0x87/0x120 [] ? __ext4_es_shrink+0x4f/0x2e0 [] ? ext4_es_free_extent+0x5d/0x70 [] _raw_spin_lock+0x39/0x50 [] ? __ext4_es_shrink+0x4f/0x2e0 [] ? kmem_cache_alloc+0x18b/0x1a0 [] __ext4_es_shrink+0x4f/0x2e0 [] ext4_es_insert_extent+0xc8/0x180 [] ext4_map_blocks+0x1c4/0x550 [] ext4_writepages+0x6d4/0xd00 ... Reported-by: Minchan Kim Signed-off-by: Theodore Ts'o Reported-by: Minchan Kim Cc: stable@vger.kernel.org Cc: Zheng Liu --- fs/ext4/extents_status.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext4/extents_status.c b/fs/ext4/extents_status.c index 3f5c188953a..0b7e28e7eaa 100644 --- a/fs/ext4/extents_status.c +++ b/fs/ext4/extents_status.c @@ -966,10 +966,10 @@ retry: continue; } - if (ei->i_es_lru_nr == 0 || ei == locked_ei) + if (ei->i_es_lru_nr == 0 || ei == locked_ei || + !write_trylock(&ei->i_es_lock)) continue; - write_lock(&ei->i_es_lock); shrunk = __es_try_to_reclaim_extents(ei, nr_to_scan); if (ei->i_es_lru_nr == 0) list_del_init(&ei->i_es_lru); -- cgit v1.2.3-70-g09d2 From bf40c92635d63fcc574c52649f7cda13e0418ac1 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 12 Jul 2014 16:11:42 -0400 Subject: ext4: fix potential null pointer dereference in ext4_free_inode Fix potential null pointer dereferencing problem caused by e43bb4e612 ("ext4: decrement free clusters/inodes counters when block group declared bad") Reported-by: Dan Carpenter Signed-off-by: Namjae Jeon Signed-off-by: Ashish Sangwan Signed-off-by: Theodore Ts'o Reviewed-by: Lukas Czerner --- fs/ext4/ialloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 0840bf321cd..5b87fc36aab 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -338,7 +338,7 @@ out: fatal = err; } else { ext4_error(sb, "bit already cleared for inode %lu", ino); - if (!EXT4_MB_GRP_IBITMAP_CORRUPT(grp)) { + if (gdp && !EXT4_MB_GRP_IBITMAP_CORRUPT(grp)) { int count; count = ext4_free_inodes_count(sb, gdp); percpu_counter_sub(&sbi->s_freeinodes_counter, -- cgit v1.2.3-70-g09d2 From eadcc7208a2237016be7bdff4551ba7614da85c8 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 28 Jun 2014 17:44:51 +0200 Subject: parisc: add serial ports of C8000/1GHz machine to hardware database Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # 3.13+ --- arch/parisc/kernel/hardware.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index 608716f8496..af3bc359dc7 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -1210,7 +1210,8 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, {HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"}, {HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"}, - {HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"}, + {HPHW_FIO, 0x076, 0x000AD, 0x0, "Crestone Peak Core RS-232"}, + {HPHW_FIO, 0x077, 0x000AD, 0x0, "Crestone Peak Fast? Core RS-232"}, {HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"}, {HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"}, {HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"}, -- cgit v1.2.3-70-g09d2 From ab8a261ba5e2dd9206da640de5870cc31d568a7c Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 10 Jul 2014 18:07:17 +0200 Subject: parisc: fix fanotify_mark() syscall on 32bit compat kernel On parisc we can not use the existing compat implementation for fanotify_mark() because for the 64bit mask parameter the higher and lower 32bits are ordered differently than what the compat function expects from big endian architectures. Specifically: It finally turned out, that on hppa we end up with different assignments of parameters to kernel arguments depending on if we call the glibc wrapper function int fanotify_mark (int __fanotify_fd, unsigned int __flags, uint64_t __mask, int __dfd, const char *__pathname); or directly calling the syscall manually syscall(__NR_fanotify_mark, ...) Reason is, that the syscall() function is implemented as C-function and because we now have the sysno as first parameter in front of the other parameters the compiler will unexpectedly add an empty paramenter in front of the u64 value to ensure the correct calling alignment for 64bit values. This means, on hppa you can't simply use syscall() to call the kernel fanotify_mark() function directly, but you have to use the glibc function instead. This patch fixes the kernel in the hppa-arch specifc coding to adjust the parameters in a way as if userspace calls the glibc wrapper function fanotify_mark(). Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # 3.13+ --- arch/parisc/kernel/sys_parisc32.c | 10 ++++++++++ arch/parisc/kernel/syscall_table.S | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index bb9f3b64de5..ec741fe02ab 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -4,6 +4,7 @@ * Copyright (C) 2000-2001 Hewlett Packard Company * Copyright (C) 2000 John Marvin * Copyright (C) 2001 Matthew Wilcox + * Copyright (C) 2014 Helge Deller * * These routines maintain argument size conversion between 32bit and 64bit * environment. Based heavily on sys_ia32.c and sys_sparc32.c. @@ -57,3 +58,12 @@ asmlinkage long sys32_unimplemented(int r26, int r25, int r24, int r23, current->comm, current->pid, r20); return -ENOSYS; } + +asmlinkage long sys32_fanotify_mark(compat_int_t fanotify_fd, compat_uint_t flags, + compat_uint_t mask0, compat_uint_t mask1, compat_int_t dfd, + const char __user * pathname) +{ + return sys_fanotify_mark(fanotify_fd, flags, + ((__u64)mask1 << 32) | mask0, + dfd, pathname); +} diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 0c9107285e6..1a0c3bf61d2 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -418,7 +418,7 @@ ENTRY_SAME(accept4) /* 320 */ ENTRY_SAME(prlimit64) ENTRY_SAME(fanotify_init) - ENTRY_COMP(fanotify_mark) + ENTRY_DIFF(fanotify_mark) ENTRY_COMP(clock_adjtime) ENTRY_SAME(name_to_handle_at) /* 325 */ ENTRY_COMP(open_by_handle_at) -- cgit v1.2.3-70-g09d2 From fe22ddcb9f271d2af0e72d2743726cf28085b1dd Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 10 Jul 2014 18:08:11 +0200 Subject: parisc: drop unused defines and header includes Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # 3.13+ --- arch/parisc/kernel/sys_parisc32.c | 36 ------------------------------------ 1 file changed, 36 deletions(-) diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index ec741fe02ab..93c1963d76f 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -12,44 +12,8 @@ #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include -#include -#include -#include - -#undef DEBUG - -#ifdef DEBUG -#define DBG(x) printk x -#else -#define DBG(x) -#endif asmlinkage long sys32_unimplemented(int r26, int r25, int r24, int r23, int r22, int r21, int r20) -- cgit v1.2.3-70-g09d2 From 15ebb05248d025534773c9ef64915bd888f04e4b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 19 Jun 2014 21:52:23 +0000 Subject: clk: spear3xx: Use proper control register offset The control register is at offset 0x10, not 0x0. This is wreckaged since commit 5df33a62c (SPEAr: Switch to common clock framework). Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Acked-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear3xx_clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index c2d20431554..125eba86c84 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -211,7 +211,7 @@ static inline void spear310_clk_init(void) { } /* array of all spear 320 clock lookups */ #ifdef CONFIG_MACH_SPEAR320 -#define SPEAR320_CONTROL_REG (soc_config_base + 0x0000) +#define SPEAR320_CONTROL_REG (soc_config_base + 0x0010) #define SPEAR320_EXT_CTRL_REG (soc_config_base + 0x0018) #define SPEAR320_UARTX_PCLK_MASK 0x1 -- cgit v1.2.3-70-g09d2 From 449437778bd09b73a5e51554f7219706da08917f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 19 Jun 2014 21:52:24 +0000 Subject: clk: spear3xx: Set proper clock parent of uart1/2 The uarts only work when the parent is ras_ahb_clk. The stale 3.5 based ST tree does this in the board file. Add it to the clk init function. Not pretty, but the mess there is amazing anyway. Signed-off-by: Thomas Gleixner Acked-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear3xx_clock.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index 125eba86c84..bb5f387774e 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -245,7 +245,8 @@ static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk", "ras_syn0_gclk", }; static const char *uartx_parents[] = { "ras_syn1_gclk", "ras_apb_clk", }; -static void __init spear320_clk_init(void __iomem *soc_config_base) +static void __init spear320_clk_init(void __iomem *soc_config_base, + struct clk *ras_apb_clk) { struct clk *clk; @@ -342,6 +343,8 @@ static void __init spear320_clk_init(void __iomem *soc_config_base) SPEAR320_CONTROL_REG, UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a3000000.serial"); + /* Enforce ras_apb_clk */ + clk_set_parent(clk, ras_apb_clk); clk = clk_register_mux(NULL, "uart2_clk", uartx_parents, ARRAY_SIZE(uartx_parents), @@ -349,6 +352,8 @@ static void __init spear320_clk_init(void __iomem *soc_config_base) SPEAR320_EXT_CTRL_REG, SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a4000000.serial"); + /* Enforce ras_apb_clk */ + clk_set_parent(clk, ras_apb_clk); clk = clk_register_mux(NULL, "uart3_clk", uartx_parents, ARRAY_SIZE(uartx_parents), @@ -379,12 +384,12 @@ static void __init spear320_clk_init(void __iomem *soc_config_base) clk_register_clkdev(clk, NULL, "60100000.serial"); } #else -static inline void spear320_clk_init(void __iomem *soc_config_base) { } +static inline void spear320_clk_init(void __iomem *sb, struct clk *rc) { } #endif void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_base) { - struct clk *clk, *clk1; + struct clk *clk, *clk1, *ras_apb_clk; clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, 32000); @@ -613,6 +618,7 @@ void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_ clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, RAS_CLK_ENB, RAS_APB_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "ras_apb_clk", NULL); + ras_apb_clk = clk; clk = clk_register_gate(NULL, "ras_32k_clk", "osc_32k_clk", 0, RAS_CLK_ENB, RAS_32K_CLK_ENB, 0, &_lock); @@ -659,5 +665,5 @@ void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_ else if (of_machine_is_compatible("st,spear310")) spear310_clk_init(); else if (of_machine_is_compatible("st,spear320")) - spear320_clk_init(soc_config_base); + spear320_clk_init(soc_config_base, ras_apb_clk); } -- cgit v1.2.3-70-g09d2 From 1795cd9b3a91d4b5473c97f491d63892442212ab Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 13 Jul 2014 14:04:33 -0700 Subject: Linux 3.16-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 216708499c3..f3c543df469 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 16 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Shuffling Zombie Juror # *DOCUMENTATION* -- cgit v1.2.3-70-g09d2 From 5cc8a0163ec2087b9bf47024f22160a69cea6f94 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sat, 5 Jul 2014 06:27:45 +0900 Subject: ARM: debug: Update Samsung UART config options In a multiplatform config, the low level debug option shows several UART port entries. Improve the user visible string so that it becomes clear to the user about Samsung UART ports. While at it also remove some lines from the help text that are no longer applicable across all Samsung platforms. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/Kconfig.debug | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 8f90595069a..b7acfa39667 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -617,53 +617,41 @@ choice depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX - bool "Use S3C UART 0 for low-level debug" + bool "Use Samsung S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 0. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX - bool "Use S3C UART 1 for low-level debug" + bool "Use Samsung S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 1. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX - bool "Use S3C UART 2 for low-level debug" + bool "Use Samsung S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 2. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C_UART3 depends on PLAT_SAMSUNG && ARCH_EXYNOS select DEBUG_EXYNOS_UART - bool "Use S3C UART 3 for low-level debug" + bool "Use Samsung S3C UART 3 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 3. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C2410_UART0 depends on ARCH_S3C24XX select DEBUG_S3C2410_UART -- cgit v1.2.3-70-g09d2 From d79992ac59fa51e7663cfec73b5a9cdcb16eb872 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sat, 5 Jul 2014 06:55:00 +0900 Subject: ARM: EXYNOS: Remove unused code in common.h PINCTRL_EXYNOS is always selected by Exynos platform in its machine Kconfig. Thus the code in the else part is never used. Remove it. Signed-off-by: Sachin Kamat Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 1ee91763fa7..3371669dabc 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -125,11 +125,7 @@ void exynos_init_late(void); void exynos_firmware_init(void); -#ifdef CONFIG_PINCTRL_EXYNOS extern u32 exynos_get_eint_wake_mask(void); -#else -static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; } -#endif #ifdef CONFIG_PM_SLEEP extern void __init exynos_pm_init(void); -- cgit v1.2.3-70-g09d2 From 5e299f65eb83a7c6e928257d3a1069a57ce8bcbb Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Tue, 8 Jul 2014 07:51:11 +0900 Subject: ARM: EXYNOS: Make exynos machine_ops as static As machine function ops are used only in this file let's make them static. Also remove unused and unwanted declarations from common.h. Signed-off-by: Pankaj Dubey Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.h | 8 -------- arch/arm/mach-exynos/exynos.c | 6 +++--- 2 files changed, 3 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 3371669dabc..152b4641711 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -111,17 +111,9 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK) #define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \ soc_is_exynos5420() || soc_is_exynos5800()) -void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); - -struct map_desc; extern void __iomem *sysram_ns_base_addr; extern void __iomem *sysram_base_addr; -void exynos_init_io(void); -void exynos_restart(enum reboot_mode mode, const char *cmd); void exynos_sysram_init(void); -void exynos_cpuidle_init(void); -void exynos_cpufreq_init(void); -void exynos_init_late(void); void exynos_firmware_init(void); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 46d893fcbe8..2e5dd50d1f8 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -143,7 +143,7 @@ static struct map_desc exynos5_iodesc[] __initdata = { }, }; -void exynos_restart(enum reboot_mode mode, const char *cmd) +static void exynos_restart(enum reboot_mode mode, const char *cmd) { struct device_node *np; u32 val = 0x1; @@ -204,7 +204,7 @@ void __init exynos_sysram_init(void) } } -void __init exynos_init_late(void) +static void __init exynos_init_late(void) { if (of_machine_is_compatible("samsung,exynos5440")) /* to be supported later */ @@ -251,7 +251,7 @@ static void __init exynos_map_io(void) iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); } -void __init exynos_init_io(void) +static void __init exynos_init_io(void) { debug_ll_io_init(); -- cgit v1.2.3-70-g09d2 From 318fd20bd150f8451b7217546220c30dd7fe88e5 Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Tue, 8 Jul 2014 07:54:08 +0900 Subject: ARM: EXYNOS: Move SYSREG definition into sys-reg specific file While making PMU implementation to be device tree based, there are few register offsets related with SYSREG present in regs-pmu.h, so let's make a new header file "regs-sys.h" to keep all such SYSREG related register offsets and remove them from "regs-pmu.h" Signed-off-by: Pankaj Dubey Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 1 + arch/arm/mach-exynos/pm.c | 1 + arch/arm/mach-exynos/regs-pmu.h | 3 --- arch/arm/mach-exynos/regs-sys.h | 22 ++++++++++++++++++++++ 4 files changed, 24 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-exynos/regs-sys.h diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 2e5dd50d1f8..269526bcc03 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -29,6 +29,7 @@ #include "common.h" #include "mfc.h" #include "regs-pmu.h" +#include "regs-sys.h" static struct map_desc exynos4_iodesc[] __initdata = { { diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 202ca73e49c..f127c0cefbb 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -35,6 +35,7 @@ #include "common.h" #include "regs-pmu.h" +#include "regs-sys.h" /** * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index 1d13b08708f..790af14626b 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -15,7 +15,6 @@ #include #define S5P_PMUREG(x) (S5P_VA_PMU + (x)) -#define S5P_SYSREG(x) (S3C_VA_SYS + (x)) #define S5P_CENTRAL_SEQ_CONFIGURATION S5P_PMUREG(0x0200) @@ -188,8 +187,6 @@ /* For EXYNOS5 */ -#define EXYNOS5_SYS_I2C_CFG S5P_SYSREG(0x0234) - #define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408) #define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C) diff --git a/arch/arm/mach-exynos/regs-sys.h b/arch/arm/mach-exynos/regs-sys.h new file mode 100644 index 00000000000..84332b0dd7a --- /dev/null +++ b/arch/arm/mach-exynos/regs-sys.h @@ -0,0 +1,22 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS - system register definition + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_SYS_H +#define __ASM_ARCH_REGS_SYS_H __FILE__ + +#include + +#define S5P_SYSREG(x) (S3C_VA_SYS + (x)) + +/* For EXYNOS5 */ +#define EXYNOS5_SYS_I2C_CFG S5P_SYSREG(0x0234) + +#endif /* __ASM_ARCH_REGS_SYS_H */ -- cgit v1.2.3-70-g09d2 From 4552386a3ef9a1db6190ed2e089a93f339d428eb Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Tue, 8 Jul 2014 07:54:13 +0900 Subject: ARM: EXYNOS: Remove file path from comment section Many files under "arm/mach-exynos" are having file path in file comment section which is invalid now. So for better code maintainability let's remove them. Signed-off-by: Pankaj Dubey Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/headsmp.S | 1 - arch/arm/mach-exynos/hotplug.c | 3 +-- arch/arm/mach-exynos/include/mach/map.h | 3 +-- arch/arm/mach-exynos/include/mach/memory.h | 3 +-- arch/arm/mach-exynos/platsmp.c | 3 +-- 5 files changed, 4 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S index cdd9d91e993..b54f9701e42 100644 --- a/arch/arm/mach-exynos/headsmp.S +++ b/arch/arm/mach-exynos/headsmp.S @@ -1,5 +1,4 @@ /* - * linux/arch/arm/mach-exynos4/headsmp.S * * Cloned from linux/arch/arm/mach-realview/headsmp.S * diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 8a134d019cb..572f6b1a08f 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -1,5 +1,4 @@ -/* linux arch/arm/mach-exynos4/hotplug.c - * +/* * Cloned from linux/arch/arm/mach-realview/hotplug.c * * Copyright (C) 2002 ARM Ltd. diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 548269a6063..963002fb15c 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-exynos/include/mach/map.h - * +/* * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h index 2a4cdb7cb32..e19df1f18c0 100644 --- a/arch/arm/mach-exynos/include/mach/memory.h +++ b/arch/arm/mach-exynos/include/mach/memory.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-exynos4/include/mach/memory.h - * +/* * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 1c8d31e3952..39ad38f561f 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-exynos4/platsmp.c - * + /* * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * -- cgit v1.2.3-70-g09d2 From b634e38f31a4b70dcaefd21b1158c27d520bd017 Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Tue, 8 Jul 2014 07:54:19 +0900 Subject: ARM: EXYNOS: Remove regs-pmu.h header dependency from pm_domain Current "pm_domain.c" file uses "S5P_INT_LOCAL_PWR_EN" definition from "regs-pmu.h" and hence needs to include this header file. As there is no other user of "S5P_INT_LOCAL_PWR_EN" definition other than pm_domain, to remove "regs-pmu.h" header file dependency from "pm_domain.c" it's better we define this definition in "pm_domain.c" file itself and thus it will help in removing header file inclusion from "pm_domain.c". Also removing "S5P_" prefix from macro. Signed-off-by: Pankaj Dubey Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pm_domains.c | 9 ++++----- arch/arm/mach-exynos/regs-pmu.h | 1 - 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 797cb134bff..fd76e1b5a47 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -23,8 +23,7 @@ #include #include -#include "regs-pmu.h" - +#define INT_LOCAL_PWR_EN 0x7 #define MAX_CLK_PER_DOMAIN 4 /* @@ -63,13 +62,13 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) } } - pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0; + pwr = power_on ? INT_LOCAL_PWR_EN : 0; __raw_writel(pwr, base); /* Wait max 1ms */ timeout = 10; - while ((__raw_readl(base + 0x4) & S5P_INT_LOCAL_PWR_EN) != pwr) { + while ((__raw_readl(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) { if (!timeout) { op = (power_on) ? "enable" : "disable"; pr_err("Power domain %s %s failed\n", domain->name, op); @@ -231,7 +230,7 @@ static __init int exynos4_pm_init_power_domain(void) no_clk: platform_set_drvdata(pdev, pd); - on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; + on = __raw_readl(pd->base + 0x4) & INT_LOCAL_PWR_EN; pm_genpd_init(&pd->pd, NULL, !on); } diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index 790af14626b..1993e6bd538 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -126,7 +126,6 @@ #define S5P_PAD_RET_EBIB_OPTION S5P_PMUREG(0x31A8) #define S5P_CORE_LOCAL_PWR_EN 0x3 -#define S5P_INT_LOCAL_PWR_EN 0x7 /* Only for EXYNOS4210 */ #define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154) -- cgit v1.2.3-70-g09d2 From 632b98ae8adbe12fda9d1f4cc6c0c177bcb44b1e Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Tue, 8 Jul 2014 07:54:23 +0900 Subject: ARM: EXYNOS: Remove "linux/bug.h" from pmu.c This patch removes unnecessary header file inclusion from pmu.c. Signed-off-by: Pankaj Dubey Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pmu.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index fb0deda3b3a..dcfcb44c3c5 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -11,7 +11,6 @@ #include #include -#include #include "common.h" #include "regs-pmu.h" -- cgit v1.2.3-70-g09d2 From fce9e5bb25264153f9f002eada41757118d25ba9 Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Fri, 11 Jul 2014 08:08:29 +0900 Subject: ARM: EXYNOS: Add support for mapping PMU base address via DT Add support for mapping Samsung Power Management Unit (PMU) base address from device tree. Signed-off-by: Pankaj Dubey Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.h | 1 + arch/arm/mach-exynos/exynos.c | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 152b4641711..f8daa9cc561 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -113,6 +113,7 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK) extern void __iomem *sysram_ns_base_addr; extern void __iomem *sysram_base_addr; +extern void __iomem *pmu_base_addr; void exynos_sysram_init(void); void exynos_firmware_init(void); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 269526bcc03..80cbbc74d2c 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -31,6 +32,8 @@ #include "regs-pmu.h" #include "regs-sys.h" +void __iomem *pmu_base_addr; + static struct map_desc exynos4_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -264,6 +267,39 @@ static void __init exynos_init_io(void) exynos_map_io(); } +static const struct of_device_id exynos_dt_pmu_match[] = { + { .compatible = "samsung,exynos3250-pmu" }, + { .compatible = "samsung,exynos4210-pmu" }, + { .compatible = "samsung,exynos4212-pmu" }, + { .compatible = "samsung,exynos4412-pmu" }, + { .compatible = "samsung,exynos5250-pmu" }, + { .compatible = "samsung,exynos5420-pmu" }, + { /*sentinel*/ }, +}; + +static void exynos_map_pmu(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, exynos_dt_pmu_match); + if (np) + pmu_base_addr = of_iomap(np, 0); + + if (!pmu_base_addr) + panic("failed to find exynos pmu register\n"); +} + +static void __init exynos_init_irq(void) +{ + irqchip_init(); + /* + * Since platsmp.c needs pmu base address by the time + * DT is not unflatten so we can't use DT APIs before + * init_irq + */ + exynos_map_pmu(); +} + static void __init exynos_dt_machine_init(void) { struct device_node *i2c_np; @@ -344,6 +380,7 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") .smp = smp_ops(exynos_smp_ops), .map_io = exynos_init_io, .init_early = exynos_firmware_init, + .init_irq = exynos_init_irq, .init_machine = exynos_dt_machine_init, .init_late = exynos_init_late, .dt_compat = exynos_dt_compat, -- cgit v1.2.3-70-g09d2