From fcd3ec6960728ff7b4b598c62a68847aa03a94a5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 1 Apr 2009 21:42:25 +0200 Subject: isd200: use ATA_* defines instead of *_STAT and *_ERR ones Acked-by: Greg Kroah-Hartman Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/usb/storage/isd200.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 38caed84c99..fdba2f69d4c 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -420,19 +420,19 @@ static void isd200_build_sense(struct us_data *us, struct scsi_cmnd *srb) buf->Flags = UNIT_ATTENTION; buf->AdditionalSenseCode = 0; buf->AdditionalSenseCodeQualifier = 0; - } else if(error & MCR_ERR) { + } else if (error & ATA_MCR) { buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; buf->AdditionalSenseLength = 0xb; buf->Flags = UNIT_ATTENTION; buf->AdditionalSenseCode = 0; buf->AdditionalSenseCodeQualifier = 0; - } else if(error & TRK0_ERR) { + } else if (error & ATA_TRK0NF) { buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; buf->AdditionalSenseLength = 0xb; buf->Flags = NOT_READY; buf->AdditionalSenseCode = 0; buf->AdditionalSenseCodeQualifier = 0; - } else if(error & ECC_ERR) { + } else if (error & ATA_UNC) { buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; buf->AdditionalSenseLength = 0xb; buf->Flags = DATA_PROTECT; @@ -945,22 +945,22 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, break; if (!detect) { - if (regs[ATA_REG_STATUS_OFFSET] & BUSY_STAT) { + if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) { US_DEBUGP(" %s status is still BSY, try again...\n",mstr); } else { US_DEBUGP(" %s status !BSY, continue with next operation\n",mstr); break; } } - /* check for BUSY_STAT and */ - /* WRERR_STAT (workaround ATA Zip drive) and */ - /* ERR_STAT (workaround for Archos CD-ROM) */ + /* check for ATA_BUSY and */ + /* ATA_DF (workaround ATA Zip drive) and */ + /* ATA_ERR (workaround for Archos CD-ROM) */ else if (regs[ATA_REG_STATUS_OFFSET] & - (BUSY_STAT | WRERR_STAT | ERR_STAT )) { + (ATA_BUSY | ATA_DF | ATA_ERR)) { US_DEBUGP(" Status indicates it is not ready, try again...\n"); } /* check for DRDY, ATA devices set DRDY after SRST */ - else if (regs[ATA_REG_STATUS_OFFSET] & READY_STAT) { + else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) { US_DEBUGP(" Identified ATA device\n"); info->DeviceFlags |= DF_ATA_DEVICE; info->DeviceHead = master_slave; -- cgit v1.2.3-70-g09d2