From bfe5a7401785f864a4f30b4f066bfa045a28b9f6 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Fri, 24 Apr 2009 10:45:31 +0800 Subject: PCI: PCIE AER: Document for PCIE AER software error injection This patch adds a minimal HOWTO for PCIE AER software error injection in Documentation/PCI/pcieaer-howto.txt. Signed-off-by: Huang Ying Signed-off-by: Jesse Barnes --- Documentation/PCI/pcieaer-howto.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'Documentation/PCI') diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt index ddeb14beacc..f6b1ba7464d 100644 --- a/Documentation/PCI/pcieaer-howto.txt +++ b/Documentation/PCI/pcieaer-howto.txt @@ -246,3 +246,24 @@ with the PCI Express AER Root driver? A: It could call the helper functions to enable AER in devices and cleanup uncorrectable status register. Pls. refer to section 3.3. + +4. Software error injection + +Debugging PCIE AER error recovery code is quite difficult because it +is hard to trigger real hardware errors. Software based error +injection can be used to fake various kinds of PCIE errors. + +First you should enable PCIE AER software error injection in kernel +configuration, that is, following item should be in your .config. + +CONFIG_PCIEAER_INJECT=y or CONFIG_PCIEAER_INJECT=m + +After reboot with new kernel or insert the module, a device file named +/dev/aer_inject should be created. + +Then, you need a user space tool named aer-inject, which can be gotten +from: + http://www.kernel.org/pub/linux/kernel/people/yhuang/ + +More information about aer-inject can be found in the document comes +with its source code. -- cgit v1.2.3-70-g09d2