From c20736f1aba75bd4251e96ef3f487beebbaf41cc Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Wed, 28 Nov 2012 15:55:30 -0200
Subject: ARM: mx27: Replace clk_register_clkdev with clock DT lookup

Similarly as it was done for mx6q, use a DT lookup in order to make maintainance
task for the clock devices easier.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 .../devicetree/bindings/clock/imx27-clock.txt      | 117 +++++++++++++++++++++
 1 file changed, 117 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.txt

(limited to 'Documentation/devicetree/bindings/clock/imx27-clock.txt')

diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt
new file mode 100644
index 00000000000..ab1a56e9de9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt
@@ -0,0 +1,117 @@
+* Clock bindings for Freescale i.MX27
+
+Required properties:
+- compatible: Should be "fsl,imx27-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX27
+clocks and IDs.
+
+	Clock		    ID
+	-----------------------
+	dummy                0
+	ckih                 1
+	ckil                 2
+	mpll                 3
+	spll                 4
+	mpll_main2           5
+	ahb                  6
+	ipg                  7
+	nfc_div              8
+	per1_div             9
+	per2_div             10
+	per3_div             11
+	per4_div             12
+	vpu_sel              13
+	vpu_div              14
+	usb_div              15
+	cpu_sel              16
+	clko_sel             17
+	cpu_div              18
+	clko_div             19
+	ssi1_sel             20
+	ssi2_sel             21
+	ssi1_div             22
+	ssi2_div             23
+	clko_en              24
+	ssi2_ipg_gate        25
+	ssi1_ipg_gate        26
+	slcdc_ipg_gate       27
+	sdhc3_ipg_gate       28
+	sdhc2_ipg_gate       29
+	sdhc1_ipg_gate       30
+	scc_ipg_gate         31
+	sahara_ipg_gate      32
+	rtc_ipg_gate         33
+	pwm_ipg_gate         34
+	owire_ipg_gate       35
+	lcdc_ipg_gate        36
+	kpp_ipg_gate         37
+	iim_ipg_gate         38
+	i2c2_ipg_gate        39
+	i2c1_ipg_gate        40
+	gpt6_ipg_gate        41
+	gpt5_ipg_gate        42
+	gpt4_ipg_gate        43
+	gpt3_ipg_gate        44
+	gpt2_ipg_gate        45
+	gpt1_ipg_gate        46
+	gpio_ipg_gate        47
+	fec_ipg_gate         48
+	emma_ipg_gate        49
+	dma_ipg_gate         50
+	cspi3_ipg_gate       51
+	cspi2_ipg_gate       52
+	cspi1_ipg_gate       53
+	nfc_baud_gate        54
+	ssi2_baud_gate       55
+	ssi1_baud_gate       56
+	vpu_baud_gate        57
+	per4_gate            58
+	per3_gate            59
+	per2_gate            60
+	per1_gate            61
+	usb_ahb_gate         62
+	slcdc_ahb_gate       63
+	sahara_ahb_gate      64
+	lcdc_ahb_gate        65
+	vpu_ahb_gate         66
+	fec_ahb_gate         67
+	emma_ahb_gate        68
+	emi_ahb_gate         69
+	dma_ahb_gate         70
+	csi_ahb_gate         71
+	brom_ahb_gate        72
+	ata_ahb_gate         73
+	wdog_ipg_gate        74
+	usb_ipg_gate         75
+	uart6_ipg_gate       76
+	uart5_ipg_gate       77
+	uart4_ipg_gate       78
+	uart3_ipg_gate       79
+	uart2_ipg_gate       80
+	uart1_ipg_gate       81
+	ckih_div1p5          82
+	fpm                  83
+	mpll_osc_sel         84
+	mpll_sel             85
+
+Examples:
+
+clks: ccm@10027000{
+	compatible = "fsl,imx27-ccm";
+	reg = <0x10027000 0x1000>;
+	#clock-cells = <1>;
+};
+
+uart1: serial@1000a000 {
+	compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+	reg = <0x1000a000 0x1000>;
+	interrupts = <20>;
+	clocks = <&clks 81>, <&clks 61>;
+	clock-names = "ipg", "per";
+	status = "disabled";
+};
-- 
cgit v1.2.3-70-g09d2