From 15b59e7c3733f90ff1f7dd66ad77ae1c90bcdff5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 10 Dec 2013 20:26:21 +0100 Subject: crypto: mxs - Add Freescale MXS DCP driver Add support for the MXS DCP block. The driver currently supports SHA-1/SHA-256 hashing and AES-128 CBC/ECB modes. The non-standard CRC32 is not yet supported. Signed-off-by: Marek Vasut Cc: David S. Miller Cc: Fabio Estevam Cc: Shawn Guo Cc: devicetree@vger.kernel.org Signed-off-by: Herbert Xu --- Documentation/devicetree/bindings/crypto/fsl-dcp.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/crypto/fsl-dcp.txt (limited to 'Documentation/devicetree/bindings/crypto') diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt new file mode 100644 index 00000000000..6949e50f1f1 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt @@ -0,0 +1,17 @@ +Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28 . + +Required properties: +- compatible : Should be "fsl,-dcp" +- reg : Should contain MXS DCP registers location and length +- interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ + must be supplied, optionally Secure IRQ can be present, but + is currently not implemented and not used. + +Example: + +dcp@80028000 { + compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; + reg = <0x80028000 0x2000>; + interrupts = <52 53>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2