From 004c15a68076f5bdc343bed92efed81087cecbfb Mon Sep 17 00:00:00 2001 From: Bill Huang Date: Sun, 19 Aug 2012 18:07:55 -0700 Subject: mfd: dt: tps6586x: Add power off control Add DT property "ti,system-power-controller" telling whether or not this pmic is in charge of controlling the system power, so the power off routine can be hooked up to system call "pm_power_off". Based on the work by: Dan Willemsen Signed-off-by: Bill Huang Tested-by: Stephen Warren Signed-off-by: Samuel Ortiz --- Documentation/devicetree/bindings/regulator/tps6586x.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation/devicetree/bindings/regulator') diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index d156e1b5db1..03dfa4e0aa7 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -18,6 +18,10 @@ Required properties: - vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8 - vinldo9-supply: The input supply for the LDO9 +Optional properties: +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. + Each regulator is defined using the standard binding for regulators. Example: @@ -30,6 +34,8 @@ Example: #gpio-cells = <2>; gpio-controller; + ti,system-power-controller; + sm0-supply = <&some_reg>; sm1-supply = <&some_reg>; sm2-supply = <&some_reg>; -- cgit v1.2.3-70-g09d2 From a91d2f8d6e4c0fd3d6e1a2b5609eb93b114effb6 Mon Sep 17 00:00:00 2001 From: Gyungoh Yoo Date: Wed, 15 Aug 2012 10:28:46 -0600 Subject: mfd: Add MAX8907 core driver The MAX8907 is an I2C-based power-management IC containing voltage regulators, a reset controller, a real-time clock, and a touch-screen controller. The original driver was written by: * Gyungoh Yoo Various fixes and enhancements by: * Jin Park * Tom Cherry * Prashant Gaikwad * Dan Willemsen * Laxman Dewangan During upstreaming, I (swarren): * Converted to regmap. * Converted to regmap-irq. * Allowed probing from device tree. * Renamed from max8907c->max8907, since the driver covers at least the C and B revisions. * General cleanup. Signed-off-by: Gyungoh Yoo Signed-off-by: Stephen Warren Reviewed-by: Mark Brown #v3 Signed-off-by: Samuel Ortiz --- .../devicetree/bindings/regulator/max8907.txt | 71 +++++ drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/max8907.c | 331 +++++++++++++++++++++ include/linux/mfd/max8907.h | 250 ++++++++++++++++ 5 files changed, 665 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/max8907.txt create mode 100644 drivers/mfd/max8907.c create mode 100644 include/linux/mfd/max8907.h (limited to 'Documentation/devicetree/bindings/regulator') diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt new file mode 100644 index 00000000000..4fd847f0afc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8907.txt @@ -0,0 +1,71 @@ +MAX8907 regulator + +Required properties: +- compatible: "maxim,max8907" +- reg: I2C slave address +- interrupts: The interrupt output of the controller +- mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC. +- in-v1-supply: The input supply for SD1. +- in-v2-supply: The input supply for SD2. +- in-v3-supply: The input supply for SD3. +- in1-supply: The input supply for LDO1. +... +- in20-supply: The input supply for LDO20. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the regulator-compatible + property, with valid values listed below. The content of each sub-node + is defined by the standard binding for regulators; see regulator.txt. + +Valid regulator-compatible values are: + + sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, + ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v, + out33v, bbat, sdby, vrtc. + +Example: + + max8907@3c { + compatible = "maxim,max8907"; + reg = <0x3c>; + interrupts = <0 86 0x4>; + + mbatt-supply = <&some_reg>; + in-v1-supply = <&mbatt_reg>; + ... + in1-supply = <&mbatt_reg>; + ... + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + mbatt_reg: regulator@0 { + reg = <0>; + regulator-compatible = "mbatt"; + regulator-name = "vbat_pmu"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sd1"; + regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sd2"; + regulator-name = "nvvdd_sv2,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; +... + }; + }; + }; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d1facef28a6..856ec00ab78 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -476,6 +476,18 @@ config MFD_MAX77693 additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX8907 + tristate "Maxim Semiconductor MAX8907 PMIC Support" + select MFD_CORE + depends on I2C=y && GENERIC_HARDIRQS + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to support for Maxim Semiconductor MAX8907. This is + a Power Management IC. This driver provides common support for + accessing the device; additional drivers must be enabled in order + to use the functionality of the device. + config MFD_MAX8925 bool "Maxim Semiconductor MAX8925 PMIC Support" depends on I2C=y && GENERIC_HARDIRQS diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 79dd22d1dc3..2a4108d9844 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -92,6 +92,7 @@ obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o obj-$(CONFIG_MFD_MAX77686) += max77686.o max77686-irq.o obj-$(CONFIG_MFD_MAX77693) += max77693.o max77693-irq.o +obj-$(CONFIG_MFD_MAX8907) += max8907.o max8925-objs := max8925-core.o max8925-i2c.o obj-$(CONFIG_MFD_MAX8925) += max8925.o obj-$(CONFIG_MFD_MAX8997) += max8997.o max8997-irq.o diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c new file mode 100644 index 00000000000..6497c98e030 --- /dev/null +++ b/drivers/mfd/max8907.c @@ -0,0 +1,331 @@ +/* + * max8907.c - mfd driver for MAX8907 + * + * Copyright (C) 2010 Gyungoh Yoo + * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct mfd_cell max8907_cells[] = { + { .name = "max8907-regulator", }, + { .name = "max8907-rtc", }, +}; + +static bool max8907_gen_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX8907_REG_ON_OFF_IRQ1: + case MAX8907_REG_ON_OFF_STAT: + case MAX8907_REG_ON_OFF_IRQ2: + case MAX8907_REG_CHG_IRQ1: + case MAX8907_REG_CHG_IRQ2: + case MAX8907_REG_CHG_STAT: + return true; + default: + return false; + } +} + +static bool max8907_gen_is_precious_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX8907_REG_ON_OFF_IRQ1: + case MAX8907_REG_ON_OFF_IRQ2: + case MAX8907_REG_CHG_IRQ1: + case MAX8907_REG_CHG_IRQ2: + return true; + default: + return false; + } +} + +static bool max8907_gen_is_writeable_reg(struct device *dev, unsigned int reg) +{ + return !max8907_gen_is_volatile_reg(dev, reg); +} + +static const struct regmap_config max8907_regmap_gen_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = max8907_gen_is_volatile_reg, + .precious_reg = max8907_gen_is_precious_reg, + .writeable_reg = max8907_gen_is_writeable_reg, + .max_register = MAX8907_REG_LDO20VOUT, + .cache_type = REGCACHE_RBTREE, +}; + +static bool max8907_rtc_is_volatile_reg(struct device *dev, unsigned int reg) +{ + if (reg <= MAX8907_REG_RTC_YEAR2) + return true; + + switch (reg) { + case MAX8907_REG_RTC_STATUS: + case MAX8907_REG_RTC_IRQ: + return true; + default: + return false; + } +} + +static bool max8907_rtc_is_precious_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX8907_REG_RTC_IRQ: + return true; + default: + return false; + } +} + +static bool max8907_rtc_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX8907_REG_RTC_STATUS: + case MAX8907_REG_RTC_IRQ: + return false; + default: + return true; + } +} + +static const struct regmap_config max8907_regmap_rtc_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = max8907_rtc_is_volatile_reg, + .precious_reg = max8907_rtc_is_precious_reg, + .writeable_reg = max8907_rtc_is_writeable_reg, + .max_register = MAX8907_REG_MPL_CNTL, + .cache_type = REGCACHE_RBTREE, +}; + +static const struct regmap_irq max8907_chg_irqs[] = { + { .reg_offset = 0, .mask = 1 << 0, }, + { .reg_offset = 0, .mask = 1 << 1, }, + { .reg_offset = 0, .mask = 1 << 2, }, + { .reg_offset = 1, .mask = 1 << 0, }, + { .reg_offset = 1, .mask = 1 << 1, }, + { .reg_offset = 1, .mask = 1 << 2, }, + { .reg_offset = 1, .mask = 1 << 3, }, + { .reg_offset = 1, .mask = 1 << 4, }, + { .reg_offset = 1, .mask = 1 << 5, }, + { .reg_offset = 1, .mask = 1 << 6, }, + { .reg_offset = 1, .mask = 1 << 7, }, +}; + +static const struct regmap_irq_chip max8907_chg_irq_chip = { + .name = "max8907 chg", + .status_base = MAX8907_REG_CHG_IRQ1, + .mask_base = MAX8907_REG_CHG_IRQ1_MASK, + .wake_base = MAX8907_REG_CHG_IRQ1_MASK, + .irq_reg_stride = MAX8907_REG_CHG_IRQ2 - MAX8907_REG_CHG_IRQ1, + .num_regs = 2, + .irqs = max8907_chg_irqs, + .num_irqs = ARRAY_SIZE(max8907_chg_irqs), +}; + +static const struct regmap_irq max8907_on_off_irqs[] = { + { .reg_offset = 0, .mask = 1 << 0, }, + { .reg_offset = 0, .mask = 1 << 1, }, + { .reg_offset = 0, .mask = 1 << 2, }, + { .reg_offset = 0, .mask = 1 << 3, }, + { .reg_offset = 0, .mask = 1 << 4, }, + { .reg_offset = 0, .mask = 1 << 5, }, + { .reg_offset = 0, .mask = 1 << 6, }, + { .reg_offset = 0, .mask = 1 << 7, }, + { .reg_offset = 1, .mask = 1 << 0, }, + { .reg_offset = 1, .mask = 1 << 1, }, +}; + +static const struct regmap_irq_chip max8907_on_off_irq_chip = { + .name = "max8907 on_off", + .status_base = MAX8907_REG_ON_OFF_IRQ1, + .mask_base = MAX8907_REG_ON_OFF_IRQ1_MASK, + .irq_reg_stride = MAX8907_REG_ON_OFF_IRQ2 - MAX8907_REG_ON_OFF_IRQ1, + .num_regs = 2, + .irqs = max8907_on_off_irqs, + .num_irqs = ARRAY_SIZE(max8907_on_off_irqs), +}; + +static const struct regmap_irq max8907_rtc_irqs[] = { + { .reg_offset = 0, .mask = 1 << 2, }, + { .reg_offset = 0, .mask = 1 << 3, }, +}; + +static const struct regmap_irq_chip max8907_rtc_irq_chip = { + .name = "max8907 rtc", + .status_base = MAX8907_REG_RTC_IRQ, + .mask_base = MAX8907_REG_RTC_IRQ_MASK, + .num_regs = 1, + .irqs = max8907_rtc_irqs, + .num_irqs = ARRAY_SIZE(max8907_rtc_irqs), +}; + +static __devinit int max8907_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct max8907 *max8907; + int ret; + + max8907 = devm_kzalloc(&i2c->dev, sizeof(struct max8907), GFP_KERNEL); + if (!max8907) { + ret = -ENOMEM; + goto err_alloc_drvdata; + } + + max8907->dev = &i2c->dev; + dev_set_drvdata(max8907->dev, max8907); + + max8907->i2c_gen = i2c; + i2c_set_clientdata(i2c, max8907); + max8907->regmap_gen = devm_regmap_init_i2c(i2c, + &max8907_regmap_gen_config); + if (IS_ERR(max8907->regmap_gen)) { + ret = PTR_ERR(max8907->regmap_gen); + dev_err(&i2c->dev, "gen regmap init failed: %d\n", ret); + goto err_regmap_gen; + } + + max8907->i2c_rtc = i2c_new_dummy(i2c->adapter, MAX8907_RTC_I2C_ADDR); + if (!max8907->i2c_rtc) { + ret = -ENOMEM; + goto err_dummy_rtc; + } + i2c_set_clientdata(max8907->i2c_rtc, max8907); + max8907->regmap_rtc = devm_regmap_init_i2c(max8907->i2c_rtc, + &max8907_regmap_rtc_config); + if (IS_ERR(max8907->regmap_rtc)) { + ret = PTR_ERR(max8907->regmap_rtc); + dev_err(&i2c->dev, "rtc regmap init failed: %d\n", ret); + goto err_regmap_rtc; + } + + irq_set_status_flags(max8907->i2c_gen->irq, IRQ_NOAUTOEN); + + ret = regmap_add_irq_chip(max8907->regmap_gen, max8907->i2c_gen->irq, + IRQF_ONESHOT | IRQF_SHARED, -1, + &max8907_chg_irq_chip, + &max8907->irqc_chg); + if (ret != 0) { + dev_err(&i2c->dev, "failed to add chg irq chip: %d\n", ret); + goto err_irqc_chg; + } + ret = regmap_add_irq_chip(max8907->regmap_gen, max8907->i2c_gen->irq, + IRQF_ONESHOT | IRQF_SHARED, -1, + &max8907_on_off_irq_chip, + &max8907->irqc_on_off); + if (ret != 0) { + dev_err(&i2c->dev, "failed to add on off irq chip: %d\n", ret); + goto err_irqc_on_off; + } + ret = regmap_add_irq_chip(max8907->regmap_rtc, max8907->i2c_gen->irq, + IRQF_ONESHOT | IRQF_SHARED, -1, + &max8907_rtc_irq_chip, + &max8907->irqc_rtc); + if (ret != 0) { + dev_err(&i2c->dev, "failed to add rtc irq chip: %d\n", ret); + goto err_irqc_rtc; + } + + enable_irq(max8907->i2c_gen->irq); + + ret = mfd_add_devices(max8907->dev, -1, max8907_cells, + ARRAY_SIZE(max8907_cells), NULL, 0, NULL); + if (ret != 0) { + dev_err(&i2c->dev, "failed to add MFD devices %d\n", ret); + goto err_add_devices; + } + + return 0; + +err_add_devices: + regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_rtc); +err_irqc_rtc: + regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_on_off); +err_irqc_on_off: + regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_chg); +err_irqc_chg: +err_regmap_rtc: + i2c_unregister_device(max8907->i2c_rtc); +err_dummy_rtc: +err_regmap_gen: +err_alloc_drvdata: + return ret; +} + +static __devexit int max8907_i2c_remove(struct i2c_client *i2c) +{ + struct max8907 *max8907 = i2c_get_clientdata(i2c); + + mfd_remove_devices(max8907->dev); + + regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_rtc); + regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_on_off); + regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_chg); + + i2c_unregister_device(max8907->i2c_rtc); + + return 0; +} + +#ifdef CONFIG_OF +static struct of_device_id max8907_of_match[] = { + { .compatible = "maxim,max8907" }, + { }, +}; +MODULE_DEVICE_TABLE(of, max8907_of_match); +#endif + +static const struct i2c_device_id max8907_i2c_id[] = { + {"max8907", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, max8907_i2c_id); + +static struct i2c_driver max8907_i2c_driver = { + .driver = { + .name = "max8907", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(max8907_of_match), + }, + .probe = max8907_i2c_probe, + .remove = max8907_i2c_remove, + .id_table = max8907_i2c_id, +}; + +static int __init max8907_i2c_init(void) +{ + int ret = -ENODEV; + + ret = i2c_add_driver(&max8907_i2c_driver); + if (ret != 0) + pr_err("Failed to register I2C driver: %d\n", ret); + + return ret; +} +subsys_initcall(max8907_i2c_init); + +static void __exit max8907_i2c_exit(void) +{ + i2c_del_driver(&max8907_i2c_driver); +} +module_exit(max8907_i2c_exit); + +MODULE_DESCRIPTION("MAX8907 multi-function core driver"); +MODULE_AUTHOR("Gyungoh Yoo "); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/max8907.h b/include/linux/mfd/max8907.h new file mode 100644 index 00000000000..283531fde4e --- /dev/null +++ b/include/linux/mfd/max8907.h @@ -0,0 +1,250 @@ +/* + * Functions to access MAX8907 power management chip. + * + * Copyright (C) 2010 Gyungoh Yoo + * Copyright (C) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MFD_MAX8907_H +#define __LINUX_MFD_MAX8907_H + +#include +#include + +#define MAX8907_GEN_I2C_ADDR (0x78 >> 1) +#define MAX8907_ADC_I2C_ADDR (0x8e >> 1) +#define MAX8907_RTC_I2C_ADDR (0xd0 >> 1) + +/* MAX8907 register map */ +#define MAX8907_REG_SYSENSEL 0x00 +#define MAX8907_REG_ON_OFF_IRQ1 0x01 +#define MAX8907_REG_ON_OFF_IRQ1_MASK 0x02 +#define MAX8907_REG_ON_OFF_STAT 0x03 +#define MAX8907_REG_SDCTL1 0x04 +#define MAX8907_REG_SDSEQCNT1 0x05 +#define MAX8907_REG_SDV1 0x06 +#define MAX8907_REG_SDCTL2 0x07 +#define MAX8907_REG_SDSEQCNT2 0x08 +#define MAX8907_REG_SDV2 0x09 +#define MAX8907_REG_SDCTL3 0x0A +#define MAX8907_REG_SDSEQCNT3 0x0B +#define MAX8907_REG_SDV3 0x0C +#define MAX8907_REG_ON_OFF_IRQ2 0x0D +#define MAX8907_REG_ON_OFF_IRQ2_MASK 0x0E +#define MAX8907_REG_RESET_CNFG 0x0F +#define MAX8907_REG_LDOCTL16 0x10 +#define MAX8907_REG_LDOSEQCNT16 0x11 +#define MAX8907_REG_LDO16VOUT 0x12 +#define MAX8907_REG_SDBYSEQCNT 0x13 +#define MAX8907_REG_LDOCTL17 0x14 +#define MAX8907_REG_LDOSEQCNT17 0x15 +#define MAX8907_REG_LDO17VOUT 0x16 +#define MAX8907_REG_LDOCTL1 0x18 +#define MAX8907_REG_LDOSEQCNT1 0x19 +#define MAX8907_REG_LDO1VOUT 0x1A +#define MAX8907_REG_LDOCTL2 0x1C +#define MAX8907_REG_LDOSEQCNT2 0x1D +#define MAX8907_REG_LDO2VOUT 0x1E +#define MAX8907_REG_LDOCTL3 0x20 +#define MAX8907_REG_LDOSEQCNT3 0x21 +#define MAX8907_REG_LDO3VOUT 0x22 +#define MAX8907_REG_LDOCTL4 0x24 +#define MAX8907_REG_LDOSEQCNT4 0x25 +#define MAX8907_REG_LDO4VOUT 0x26 +#define MAX8907_REG_LDOCTL5 0x28 +#define MAX8907_REG_LDOSEQCNT5 0x29 +#define MAX8907_REG_LDO5VOUT 0x2A +#define MAX8907_REG_LDOCTL6 0x2C +#define MAX8907_REG_LDOSEQCNT6 0x2D +#define MAX8907_REG_LDO6VOUT 0x2E +#define MAX8907_REG_LDOCTL7 0x30 +#define MAX8907_REG_LDOSEQCNT7 0x31 +#define MAX8907_REG_LDO7VOUT 0x32 +#define MAX8907_REG_LDOCTL8 0x34 +#define MAX8907_REG_LDOSEQCNT8 0x35 +#define MAX8907_REG_LDO8VOUT 0x36 +#define MAX8907_REG_LDOCTL9 0x38 +#define MAX8907_REG_LDOSEQCNT9 0x39 +#define MAX8907_REG_LDO9VOUT 0x3A +#define MAX8907_REG_LDOCTL10 0x3C +#define MAX8907_REG_LDOSEQCNT10 0x3D +#define MAX8907_REG_LDO10VOUT 0x3E +#define MAX8907_REG_LDOCTL11 0x40 +#define MAX8907_REG_LDOSEQCNT11 0x41 +#define MAX8907_REG_LDO11VOUT 0x42 +#define MAX8907_REG_LDOCTL12 0x44 +#define MAX8907_REG_LDOSEQCNT12 0x45 +#define MAX8907_REG_LDO12VOUT 0x46 +#define MAX8907_REG_LDOCTL13 0x48 +#define MAX8907_REG_LDOSEQCNT13 0x49 +#define MAX8907_REG_LDO13VOUT 0x4A +#define MAX8907_REG_LDOCTL14 0x4C +#define MAX8907_REG_LDOSEQCNT14 0x4D +#define MAX8907_REG_LDO14VOUT 0x4E +#define MAX8907_REG_LDOCTL15 0x50 +#define MAX8907_REG_LDOSEQCNT15 0x51 +#define MAX8907_REG_LDO15VOUT 0x52 +#define MAX8907_REG_OUT5VEN 0x54 +#define MAX8907_REG_OUT5VSEQ 0x55 +#define MAX8907_REG_OUT33VEN 0x58 +#define MAX8907_REG_OUT33VSEQ 0x59 +#define MAX8907_REG_LDOCTL19 0x5C +#define MAX8907_REG_LDOSEQCNT19 0x5D +#define MAX8907_REG_LDO19VOUT 0x5E +#define MAX8907_REG_LBCNFG 0x60 +#define MAX8907_REG_SEQ1CNFG 0x64 +#define MAX8907_REG_SEQ2CNFG 0x65 +#define MAX8907_REG_SEQ3CNFG 0x66 +#define MAX8907_REG_SEQ4CNFG 0x67 +#define MAX8907_REG_SEQ5CNFG 0x68 +#define MAX8907_REG_SEQ6CNFG 0x69 +#define MAX8907_REG_SEQ7CNFG 0x6A +#define MAX8907_REG_LDOCTL18 0x72 +#define MAX8907_REG_LDOSEQCNT18 0x73 +#define MAX8907_REG_LDO18VOUT 0x74 +#define MAX8907_REG_BBAT_CNFG 0x78 +#define MAX8907_REG_CHG_CNTL1 0x7C +#define MAX8907_REG_CHG_CNTL2 0x7D +#define MAX8907_REG_CHG_IRQ1 0x7E +#define MAX8907_REG_CHG_IRQ2 0x7F +#define MAX8907_REG_CHG_IRQ1_MASK 0x80 +#define MAX8907_REG_CHG_IRQ2_MASK 0x81 +#define MAX8907_REG_CHG_STAT 0x82 +#define MAX8907_REG_WLED_MODE_CNTL 0x84 +#define MAX8907_REG_ILED_CNTL 0x84 +#define MAX8907_REG_II1RR 0x8E +#define MAX8907_REG_II2RR 0x8F +#define MAX8907_REG_LDOCTL20 0x9C +#define MAX8907_REG_LDOSEQCNT20 0x9D +#define MAX8907_REG_LDO20VOUT 0x9E + +/* RTC register map */ +#define MAX8907_REG_RTC_SEC 0x00 +#define MAX8907_REG_RTC_MIN 0x01 +#define MAX8907_REG_RTC_HOURS 0x02 +#define MAX8907_REG_RTC_WEEKDAY 0x03 +#define MAX8907_REG_RTC_DATE 0x04 +#define MAX8907_REG_RTC_MONTH 0x05 +#define MAX8907_REG_RTC_YEAR1 0x06 +#define MAX8907_REG_RTC_YEAR2 0x07 +#define MAX8907_REG_ALARM0_SEC 0x08 +#define MAX8907_REG_ALARM0_MIN 0x09 +#define MAX8907_REG_ALARM0_HOURS 0x0A +#define MAX8907_REG_ALARM0_WEEKDAY 0x0B +#define MAX8907_REG_ALARM0_DATE 0x0C +#define MAX8907_REG_ALARM0_MONTH 0x0D +#define MAX8907_REG_ALARM0_YEAR1 0x0E +#define MAX8907_REG_ALARM0_YEAR2 0x0F +#define MAX8907_REG_ALARM1_SEC 0x10 +#define MAX8907_REG_ALARM1_MIN 0x11 +#define MAX8907_REG_ALARM1_HOURS 0x12 +#define MAX8907_REG_ALARM1_WEEKDAY 0x13 +#define MAX8907_REG_ALARM1_DATE 0x14 +#define MAX8907_REG_ALARM1_MONTH 0x15 +#define MAX8907_REG_ALARM1_YEAR1 0x16 +#define MAX8907_REG_ALARM1_YEAR2 0x17 +#define MAX8907_REG_ALARM0_CNTL 0x18 +#define MAX8907_REG_ALARM1_CNTL 0x19 +#define MAX8907_REG_RTC_STATUS 0x1A +#define MAX8907_REG_RTC_CNTL 0x1B +#define MAX8907_REG_RTC_IRQ 0x1C +#define MAX8907_REG_RTC_IRQ_MASK 0x1D +#define MAX8907_REG_MPL_CNTL 0x1E + +/* ADC and Touch Screen Controller register map */ +#define MAX8907_CTL 0 +#define MAX8907_SEQCNT 1 +#define MAX8907_VOUT 2 + +/* mask bit fields */ +#define MAX8907_MASK_LDO_SEQ 0x1C +#define MAX8907_MASK_LDO_EN 0x01 +#define MAX8907_MASK_VBBATTCV 0x03 +#define MAX8907_MASK_OUT5V_VINEN 0x10 +#define MAX8907_MASK_OUT5V_ENSRC 0x0E +#define MAX8907_MASK_OUT5V_EN 0x01 + +/* Regulator IDs */ +#define MAX8907_MBATT 0 +#define MAX8907_SD1 1 +#define MAX8907_SD2 2 +#define MAX8907_SD3 3 +#define MAX8907_LDO1 4 +#define MAX8907_LDO2 5 +#define MAX8907_LDO3 6 +#define MAX8907_LDO4 7 +#define MAX8907_LDO5 8 +#define MAX8907_LDO6 9 +#define MAX8907_LDO7 10 +#define MAX8907_LDO8 11 +#define MAX8907_LDO9 12 +#define MAX8907_LDO10 13 +#define MAX8907_LDO11 14 +#define MAX8907_LDO12 15 +#define MAX8907_LDO13 16 +#define MAX8907_LDO14 17 +#define MAX8907_LDO15 18 +#define MAX8907_LDO16 19 +#define MAX8907_LDO17 20 +#define MAX8907_LDO18 21 +#define MAX8907_LDO19 22 +#define MAX8907_LDO20 23 +#define MAX8907_OUT5V 24 +#define MAX8907_OUT33V 25 +#define MAX8907_BBAT 26 +#define MAX8907_SDBY 27 +#define MAX8907_VRTC 28 +#define MAX8907_NUM_REGULATORS (MAX8907_VRTC + 1) + +/* IRQ definitions */ +enum { + MAX8907_IRQ_VCHG_DC_OVP = 0, + MAX8907_IRQ_VCHG_DC_F, + MAX8907_IRQ_VCHG_DC_R, + MAX8907_IRQ_VCHG_THM_OK_R, + MAX8907_IRQ_VCHG_THM_OK_F, + MAX8907_IRQ_VCHG_MBATTLOW_F, + MAX8907_IRQ_VCHG_MBATTLOW_R, + MAX8907_IRQ_VCHG_RST, + MAX8907_IRQ_VCHG_DONE, + MAX8907_IRQ_VCHG_TOPOFF, + MAX8907_IRQ_VCHG_TMR_FAULT, + + MAX8907_IRQ_GPM_RSTIN = 0, + MAX8907_IRQ_GPM_MPL, + MAX8907_IRQ_GPM_SW_3SEC, + MAX8907_IRQ_GPM_EXTON_F, + MAX8907_IRQ_GPM_EXTON_R, + MAX8907_IRQ_GPM_SW_1SEC, + MAX8907_IRQ_GPM_SW_F, + MAX8907_IRQ_GPM_SW_R, + MAX8907_IRQ_GPM_SYSCKEN_F, + MAX8907_IRQ_GPM_SYSCKEN_R, + + MAX8907_IRQ_RTC_ALARM1 = 0, + MAX8907_IRQ_RTC_ALARM0, +}; + +struct max8907_platform_data { + struct regulator_init_data *init_data[MAX8907_NUM_REGULATORS]; +}; + +struct regmap_irq_chips_data; + +struct max8907 { + struct device *dev; + struct mutex irq_lock; + struct i2c_client *i2c_gen; + struct i2c_client *i2c_rtc; + struct regmap *regmap_gen; + struct regmap *regmap_rtc; + struct regmap_irq_chip_data *irqc_chg; + struct regmap_irq_chip_data *irqc_on_off; + struct regmap_irq_chip_data *irqc_rtc; +}; + +#endif -- cgit v1.2.3-70-g09d2 From 9582fdcb6fcf1b596a83b161a2ea886272d2a62f Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 18 Sep 2012 16:51:19 -0600 Subject: mfd: max8907: Add power off control Add DT property "maxim,system-power-controller" to indicate whether the PMIC is in charge of controlling the system power. If this is set, the driver will provide the pm_power_off() function. Signed-off-by: Stephen Warren Signed-off-by: Samuel Ortiz --- .../devicetree/bindings/regulator/max8907.txt | 6 ++++++ drivers/mfd/max8907.c | 20 ++++++++++++++++++++ include/linux/mfd/max8907.h | 2 ++ 3 files changed, 28 insertions(+) (limited to 'Documentation/devicetree/bindings/regulator') diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt index 4fd847f0afc..51e683b2bf4 100644 --- a/Documentation/devicetree/bindings/regulator/max8907.txt +++ b/Documentation/devicetree/bindings/regulator/max8907.txt @@ -16,6 +16,10 @@ Required properties: property, with valid values listed below. The content of each sub-node is defined by the standard binding for regulators; see regulator.txt. +Optional properties: +- maxim,system-power-controller: Boolean property indicating that the PMIC + controls the overall system power. + Valid regulator-compatible values are: sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, @@ -29,6 +33,8 @@ Example: reg = <0x3c>; interrupts = <0 86 0x4>; + maxim,system-power-controller; + mbatt-supply = <&some_reg>; in-v1-supply = <&mbatt_reg>; ... diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c index 6497c98e030..2303641dd05 100644 --- a/drivers/mfd/max8907.c +++ b/drivers/mfd/max8907.c @@ -176,11 +176,26 @@ static const struct regmap_irq_chip max8907_rtc_irq_chip = { .num_irqs = ARRAY_SIZE(max8907_rtc_irqs), }; +struct max8907 *max8907_pm_off; +static void max8907_power_off(void) +{ + regmap_update_bits(max8907_pm_off->regmap_gen, MAX8907_REG_RESET_CNFG, + MAX8907_MASK_POWER_OFF, MAX8907_MASK_POWER_OFF); +} + static __devinit int max8907_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct max8907 *max8907; int ret; + struct max8907_platform_data *pdata = dev_get_platdata(&i2c->dev); + bool pm_off = false; + + if (pdata) + pm_off = pdata->pm_off; + else if (i2c->dev.of_node) + pm_off = of_property_read_bool(i2c->dev.of_node, + "maxim,system-power-controller"); max8907 = devm_kzalloc(&i2c->dev, sizeof(struct max8907), GFP_KERNEL); if (!max8907) { @@ -251,6 +266,11 @@ static __devinit int max8907_i2c_probe(struct i2c_client *i2c, goto err_add_devices; } + if (pm_off && !pm_power_off) { + max8907_pm_off = max8907; + pm_power_off = max8907_power_off; + } + return 0; err_add_devices: diff --git a/include/linux/mfd/max8907.h b/include/linux/mfd/max8907.h index 283531fde4e..b06f7a6a1e8 100644 --- a/include/linux/mfd/max8907.h +++ b/include/linux/mfd/max8907.h @@ -167,6 +167,7 @@ #define MAX8907_MASK_OUT5V_VINEN 0x10 #define MAX8907_MASK_OUT5V_ENSRC 0x0E #define MAX8907_MASK_OUT5V_EN 0x01 +#define MAX8907_MASK_POWER_OFF 0x40 /* Regulator IDs */ #define MAX8907_MBATT 0 @@ -231,6 +232,7 @@ enum { struct max8907_platform_data { struct regulator_init_data *init_data[MAX8907_NUM_REGULATORS]; + bool pm_off; }; struct regmap_irq_chips_data; -- cgit v1.2.3-70-g09d2 From 396f70be54f026a6601012a73db87dc75c6d8f1d Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 24 Sep 2012 13:25:03 -0600 Subject: mfd: max8907: Remove regulator-compatible from DT docs Commit "regulator: deprecate regulator-compatible DT property" deprecated the use of the regulator-compatible DT property. Update the DT example in the MAX8907 binding documentation to reflect this. Signed-off-by: Stephen Warren Signed-off-by: Samuel Ortiz --- .../devicetree/bindings/regulator/max8907.txt | 24 ++++++++-------------- 1 file changed, 8 insertions(+), 16 deletions(-) (limited to 'Documentation/devicetree/bindings/regulator') diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt index 51e683b2bf4..371eccd1cd6 100644 --- a/Documentation/devicetree/bindings/regulator/max8907.txt +++ b/Documentation/devicetree/bindings/regulator/max8907.txt @@ -12,15 +12,16 @@ Required properties: ... - in20-supply: The input supply for LDO20. - regulators: A node that houses a sub-node for each regulator within the - device. Each sub-node is identified using the regulator-compatible - property, with valid values listed below. The content of each sub-node - is defined by the standard binding for regulators; see regulator.txt. + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. Optional properties: - maxim,system-power-controller: Boolean property indicating that the PMIC controls the overall system power. -Valid regulator-compatible values are: +The valid names for regulators are: sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v, @@ -42,30 +43,21 @@ Example: ... regulators { - #address-cells = <1>; - #size-cells = <0>; - - mbatt_reg: regulator@0 { - reg = <0>; - regulator-compatible = "mbatt"; + mbatt_reg: mbatt { regulator-name = "vbat_pmu"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sd1"; + sd1 { regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sd2"; + sd2 { regulator-name = "nvvdd_sv2,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; -- cgit v1.2.3-70-g09d2 From 2e57d56747e601b3e0ff6697e524025d0504d161 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Fri, 21 Sep 2012 18:06:52 +0800 Subject: mfd: 88pm860x: Device tree support Signed-off-by: Haojian Zhuang Signed-off-by: Samuel Ortiz --- Documentation/devicetree/bindings/mfd/88pm860x.txt | 85 ++++++++++++++++++++++ .../devicetree/bindings/regulator/88pm860x.txt | 30 ++++++++ .../bindings/video/backlight/88pm860x.txt | 15 ++++ drivers/input/touchscreen/88pm860x-ts.c | 46 ++++++++---- drivers/leds/leds-88pm860x.c | 33 ++++++++- drivers/mfd/88pm860x-core.c | 62 +++++++++++++--- drivers/regulator/88pm8607.c | 35 ++++++++- drivers/rtc/rtc-88pm860x.c | 43 ++++++++--- drivers/video/backlight/88pm860x_bl.c | 39 +++++++++- include/linux/mfd/88pm860x.h | 4 +- 10 files changed, 351 insertions(+), 41 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/88pm860x.txt create mode 100644 Documentation/devicetree/bindings/regulator/88pm860x.txt create mode 100644 Documentation/devicetree/bindings/video/backlight/88pm860x.txt (limited to 'Documentation/devicetree/bindings/regulator') diff --git a/Documentation/devicetree/bindings/mfd/88pm860x.txt b/Documentation/devicetree/bindings/mfd/88pm860x.txt new file mode 100644 index 00000000000..63f3ee33759 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/88pm860x.txt @@ -0,0 +1,85 @@ +* Marvell 88PM860x Power Management IC + +Required parent device properties: +- compatible : "marvell,88pm860x" +- reg : the I2C slave address for the 88pm860x chip +- interrupts : IRQ line for the 88pm860x chip +- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain) +- #interrupt-cells : should be 1. + - The cell is the 88pm860x local IRQ number + +Optional parent device properties: +- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read +- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. stores the I2C address + of one chip, and this property stores the I2C address of + another chip. + +88pm860x consists of a large and varied group of sub-devices: + +Device Supply Names Description +------ ------------ ----------- +88pm860x-onkey : : On key +88pm860x-rtc : : RTC +88pm8607 : : Regulators +88pm860x-backlight : : Backlight +88pm860x-led : : Led +88pm860x-touch : : Touchscreen + +Example: + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + interrupts = <4>; + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <1>; + + marvell,88pm860x-irq-read-clr; + marvell,88pm860x-slave-addr = <0x11>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + rtc { + marvell,88pm860x-vrtc = <1>; + }; + touch { + marvell,88pm860x-gpadc-prebias = <1>; + marvell,88pm860x-gpadc-slot-cycle = <1>; + marvell,88pm860x-tsi-prebias = <6>; + marvell,88pm860x-pen-prebias = <16>; + marvell,88pm860x-pen-prechg = <2>; + marvell,88pm860x-resistor-X = <300>; + }; + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; + }; + leds { + led0-red { + marvell,88pm860x-iset = <12>; + }; + led0-green { + marvell,88pm860x-iset = <12>; + }; + led0-blue { + marvell,88pm860x-iset = <12>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt new file mode 100644 index 00000000000..1267b3e1a2c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pm860x.txt @@ -0,0 +1,30 @@ +Marvell 88PM860x regulator + +Required properties: +- compatible: "marvell,88pm860x" +- reg: I2C slave address +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the regulator-compatible + property, with valid values listed below. + +Example: + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/video/backlight/88pm860x.txt b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt new file mode 100644 index 00000000000..261df279931 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt @@ -0,0 +1,15 @@ +88pm860x-backlight bindings + +Optional properties: + - marvell,88pm860x-iset: Current supplies on backlight device. + - marvell,88pm860x-pwm: PWM frequency on backlight device. + +Example: + + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; diff --git a/drivers/input/touchscreen/88pm860x-ts.c b/drivers/input/touchscreen/88pm860x-ts.c index 05f30b73c3c..4f81e6eb74b 100644 --- a/drivers/input/touchscreen/88pm860x-ts.c +++ b/drivers/input/touchscreen/88pm860x-ts.c @@ -10,6 +10,7 @@ */ #include #include +#include #include #include #include @@ -113,14 +114,31 @@ static void pm860x_touch_close(struct input_dev *dev) pm860x_set_bits(touch->i2c, MEAS_EN3, data, 0); } +#ifdef CONFIG_OF +static int __devinit pm860x_touch_dt_init(struct platform_device *pdev, + int *res_x) +{ + struct device_node *np = pdev->dev.parent->of_node; + if (!np) + return -ENODEV; + np = of_find_node_by_name(np, "touch"); + if (!np) { + dev_err(&pdev->dev, "Can't find touch node\n"); + return -EINVAL; + } + of_property_read_u32(np, "marvell,88pm860x-resistor-X", res_x); + return 0; +} +#else +#define pm860x_touch_dt_init(x, y) (-1) +#endif + static int __devinit pm860x_touch_probe(struct platform_device *pdev) { struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); - struct pm860x_platform_data *pm860x_pdata = \ - pdev->dev.parent->platform_data; - struct pm860x_touch_pdata *pdata = NULL; + struct pm860x_touch_pdata *pdata = pdev->dev.platform_data; struct pm860x_touch *touch; - int irq, ret; + int irq, ret, res_x = 0; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -128,15 +146,13 @@ static int __devinit pm860x_touch_probe(struct platform_device *pdev) return -EINVAL; } - if (!pm860x_pdata) { - dev_err(&pdev->dev, "platform data is missing\n"); - return -EINVAL; - } - - pdata = pm860x_pdata->touch; - if (!pdata) { - dev_err(&pdev->dev, "touchscreen data is missing\n"); - return -EINVAL; + if (pm860x_touch_dt_init(pdev, &res_x)) { + if (pdata) + res_x = pdata->res_x; + else { + dev_err(&pdev->dev, "failed to get platform data\n"); + return -EINVAL; + } } touch = kzalloc(sizeof(struct pm860x_touch), GFP_KERNEL); @@ -159,8 +175,8 @@ static int __devinit pm860x_touch_probe(struct platform_device *pdev) touch->idev->close = pm860x_touch_close; touch->chip = chip; touch->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion; - touch->irq = irq + chip->irq_base; - touch->res_x = pdata->res_x; + touch->irq = irq; + touch->res_x = res_x; input_set_drvdata(touch->idev, touch); ret = request_threaded_irq(touch->irq, NULL, pm860x_touch_handler, diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c index 70232b1756f..b7e8cc0957f 100644 --- a/drivers/leds/leds-88pm860x.c +++ b/drivers/leds/leds-88pm860x.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -123,6 +124,33 @@ static void pm860x_led_set(struct led_classdev *cdev, schedule_work(&data->work); } +#ifdef CONFIG_OF +static int pm860x_led_dt_init(struct platform_device *pdev, + struct pm860x_led *data) +{ + struct device_node *nproot = pdev->dev.parent->of_node, *np; + int iset = 0; + if (!nproot) + return -ENODEV; + nproot = of_find_node_by_name(nproot, "leds"); + if (!nproot) { + dev_err(&pdev->dev, "failed to find leds node\n"); + return -ENODEV; + } + for_each_child_of_node(nproot, np) { + if (!of_node_cmp(np->name, data->name)) { + of_property_read_u32(np, "marvell,88pm860x-iset", + &iset); + data->iset = PM8606_LED_CURRENT(iset); + break; + } + } + return 0; +} +#else +#define pm860x_led_dt_init(x, y) (-1) +#endif + static int pm860x_led_probe(struct platform_device *pdev) { struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); @@ -179,8 +207,9 @@ static int pm860x_led_probe(struct platform_device *pdev) data->chip = chip; data->i2c = (chip->id == CHIP_PM8606) ? chip->client : chip->companion; data->port = pdev->id; - if (pdata && pdata->iset) - data->iset = pdata->iset; + if (pm860x_led_dt_init(pdev, data)) + if (pdata) + data->iset = pdata->iset; data->current_brightness = 0; data->cdev.name = data->name; diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index 5b56fe8250b..fdaf6861ce9 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include #include #include @@ -1112,12 +1114,6 @@ static void __devexit pm860x_device_exit(struct pm860x_chip *chip) mfd_remove_devices(chip->dev); } -static const struct i2c_device_id pm860x_id_table[] = { - { "88PM860x", 0 }, - {} -}; -MODULE_DEVICE_TABLE(i2c, pm860x_id_table); - static int verify_addr(struct i2c_client *i2c) { unsigned short addr_8607[] = {0x30, 0x34}; @@ -1144,21 +1140,52 @@ static struct regmap_config pm860x_regmap_config = { .val_bits = 8, }; +static int __devinit pm860x_dt_init(struct device_node *np, + struct device *dev, + struct pm860x_platform_data *pdata) +{ + int ret; + + if (of_get_property(np, "marvell,88pm860x-irq-read-clr", NULL)) + pdata->irq_mode = 1; + ret = of_property_read_u32(np, "marvell,88pm860x-slave-addr", + &pdata->companion_addr); + if (ret) { + dev_err(dev, "Not found \"marvell,88pm860x-slave-addr\" " + "property\n"); + pdata->companion_addr = 0; + } + return 0; +} + static int __devinit pm860x_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct pm860x_platform_data *pdata = client->dev.platform_data; + struct device_node *node = client->dev.of_node; struct pm860x_chip *chip; int ret; - if (!pdata) { + if (node && !pdata) { + /* parse DT to get platform data */ + pdata = devm_kzalloc(&client->dev, + sizeof(struct pm860x_platform_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + ret = pm860x_dt_init(node, &client->dev, pdata); + if (ret) + goto err; + } else if (!pdata) { pr_info("No platform data in %s!\n", __func__); return -EINVAL; } chip = kzalloc(sizeof(struct pm860x_chip), GFP_KERNEL); - if (chip == NULL) - return -ENOMEM; + if (chip == NULL) { + ret = -ENOMEM; + goto err; + } chip->id = verify_addr(client); chip->regmap = regmap_init_i2c(client, &pm860x_regmap_config); @@ -1198,6 +1225,10 @@ static int __devinit pm860x_probe(struct i2c_client *client, pm860x_device_init(chip, pdata); return 0; +err: + if (node) + devm_kfree(&client->dev, pdata); + return ret; } static int __devexit pm860x_remove(struct i2c_client *client) @@ -1238,11 +1269,24 @@ static int pm860x_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pm860x_pm_ops, pm860x_suspend, pm860x_resume); +static const struct i2c_device_id pm860x_id_table[] = { + { "88PM860x", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, pm860x_id_table); + +static const struct of_device_id pm860x_dt_ids[] = { + { .compatible = "marvell,88pm860x", }, + {}, +}; +MODULE_DEVICE_TABLE(of, pm860x_dt_ids); + static struct i2c_driver pm860x_driver = { .driver = { .name = "88PM860x", .owner = THIS_MODULE, .pm = &pm860x_pm_ops, + .of_match_table = of_match_ptr(pm860x_dt_ids), }, .probe = pm860x_probe, .remove = __devexit_p(pm860x_remove), diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c index f96fbe38ff6..1c5ab0172ea 100644 --- a/drivers/regulator/88pm8607.c +++ b/drivers/regulator/88pm8607.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include #include #include #include @@ -364,6 +366,34 @@ static struct pm8607_regulator_info pm8606_regulator_info[] = { PM8606_PREG(PREREGULATORB, 5), }; +#ifdef CONFIG_OF +static int pm8607_regulator_dt_init(struct platform_device *pdev, + struct pm8607_regulator_info *info, + struct regulator_config *config) +{ + struct device_node *nproot, *np; + nproot = pdev->dev.parent->of_node; + if (!nproot) + return -ENODEV; + nproot = of_find_node_by_name(nproot, "regulators"); + if (!nproot) { + dev_err(&pdev->dev, "failed to find regulators node\n"); + return -ENODEV; + } + for_each_child_of_node(nproot, np) { + if (!of_node_cmp(np->name, info->desc.name)) { + config->init_data = + of_get_regulator_init_data(&pdev->dev, np); + config->of_node = np; + break; + } + } + return 0; +} +#else +#define pm8607_regulator_dt_init(x, y, z) (-1) +#endif + static int __devinit pm8607_regulator_probe(struct platform_device *pdev) { struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); @@ -402,9 +432,12 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev) info->slope_double = 1; config.dev = &pdev->dev; - config.init_data = pdata; config.driver_data = info; + if (pm8607_regulator_dt_init(pdev, info, &config)) + if (pdata) + config.init_data = pdata; + if (chip->id == CHIP_PM8607) config.regmap = chip->regmap; else diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c index feddefc4210..de9e854b326 100644 --- a/drivers/rtc/rtc-88pm860x.c +++ b/drivers/rtc/rtc-88pm860x.c @@ -11,6 +11,7 @@ #include #include +#include #include #include #include @@ -284,6 +285,28 @@ out: } #endif +#ifdef CONFIG_OF +static int __devinit pm860x_rtc_dt_init(struct platform_device *pdev, + struct pm860x_rtc_info *info) +{ + struct device_node *np = pdev->dev.parent->of_node; + int ret; + if (!np) + return -ENODEV; + np = of_find_node_by_name(np, "rtc"); + if (!np) { + dev_err(&pdev->dev, "failed to find rtc node\n"); + return -ENODEV; + } + ret = of_property_read_u32(np, "marvell,88pm860x-vrtc", &info->vrtc); + if (ret) + info->vrtc = 0; + return 0; +} +#else +#define pm860x_rtc_dt_init(x, y) (-1) +#endif + static int __devinit pm860x_rtc_probe(struct platform_device *pdev) { struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); @@ -294,8 +317,6 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev) int ret; pdata = pdev->dev.platform_data; - if (pdata == NULL) - dev_warn(&pdev->dev, "No platform data!\n"); info = kzalloc(sizeof(struct pm860x_rtc_info), GFP_KERNEL); if (!info) @@ -345,9 +366,11 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev) } } rtc_tm_to_time(&tm, &ticks); - if (pdata && pdata->sync) { - pdata->sync(ticks); - info->sync = pdata->sync; + if (pm860x_rtc_dt_init(pdev, info)) { + if (pdata && pdata->sync) { + pdata->sync(ticks); + info->sync = pdata->sync; + } } info->rtc_dev = rtc_device_register("88pm860x-rtc", &pdev->dev, @@ -366,10 +389,12 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev) #ifdef VRTC_CALIBRATION /* <00> -- 2.7V, <01> -- 2.9V, <10> -- 3.1V, <11> -- 3.3V */ - if (pdata && pdata->vrtc) - info->vrtc = pdata->vrtc & 0x3; - else - info->vrtc = 1; + if (pm860x_rtc_dt_init(pdev, info)) { + if (pdata && pdata->vrtc) + info->vrtc = pdata->vrtc & 0x3; + else + info->vrtc = 1; + } pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, MEAS2_VRTC); /* calibrate VRTC */ diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c index 965161cacef..b7ec34c57f4 100644 --- a/drivers/video/backlight/88pm860x_bl.c +++ b/drivers/video/backlight/88pm860x_bl.c @@ -11,6 +11,7 @@ #include #include +#include #include #include #include @@ -159,6 +160,36 @@ static const struct backlight_ops pm860x_backlight_ops = { .get_brightness = pm860x_backlight_get_brightness, }; +#ifdef CONFIG_OF +static int pm860x_backlight_dt_init(struct platform_device *pdev, + struct pm860x_backlight_data *data, + char *name) +{ + struct device_node *nproot = pdev->dev.parent->of_node, *np; + int iset = 0; + if (!nproot) + return -ENODEV; + nproot = of_find_node_by_name(nproot, "backlights"); + if (!nproot) { + dev_err(&pdev->dev, "failed to find backlights node\n"); + return -ENODEV; + } + for_each_child_of_node(nproot, np) { + if (!of_node_cmp(np->name, name)) { + of_property_read_u32(np, "marvell,88pm860x-iset", + &iset); + data->iset = PM8606_WLED_CURRENT(iset); + of_property_read_u32(np, "marvell,88pm860x-pwm", + &data->pwm); + break; + } + } + return 0; +} +#else +#define pm860x_backlight_dt_init(x, y, z) (-1) +#endif + static int pm860x_backlight_probe(struct platform_device *pdev) { struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); @@ -203,9 +234,11 @@ static int pm860x_backlight_probe(struct platform_device *pdev) data->i2c = (chip->id == CHIP_PM8606) ? chip->client \ : chip->companion; data->current_brightness = MAX_BRIGHTNESS; - if (pdata) { - data->pwm = pdata->pwm; - data->iset = pdata->iset; + if (pm860x_backlight_dt_init(pdev, data, name)) { + if (pdata) { + data->pwm = pdata->pwm; + data->iset = pdata->iset; + } } memset(&props, 0, sizeof(struct backlight_properties)); diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index d515e5c438f..ef3e6b70117 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -306,7 +306,7 @@ struct pm860x_chip { struct regmap *regmap_companion; int buck3_double; /* DVC ramp slope double */ - unsigned short companion_addr; + int companion_addr; unsigned short osc_vote; int id; int irq_mode; @@ -376,7 +376,7 @@ struct pm860x_platform_data { struct regulator_init_data *ldo_vibrator; struct regulator_init_data *ldo14; - unsigned short companion_addr; /* I2C address of companion chip */ + int companion_addr; /* I2C address of companion chip */ int i2c_port; /* Controlled by GI2C or PI2C */ int irq_mode; /* Clear interrupt by read/write(0/1) */ int irq_base; /* IRQ base number of 88pm860x */ -- cgit v1.2.3-70-g09d2