From 0331bbf3c6fd9997e5f0d165840229ccfeba6548 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Oct 2011 18:06:56 +0200 Subject: tty/serial: RS485 bindings for device tree Generic bindings for RS485 feature included in some UARTs. Those bindings have to be used withing an UART device tree node. Documentation updated to link to the bindings definition. Signed-off-by: Nicolas Ferre Acked-by: Grant Likely Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/tty/serial/atmel-usart.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/tty/serial/atmel-usart.txt (limited to 'Documentation/devicetree/bindings/tty/serial/atmel-usart.txt') diff --git a/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt b/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt new file mode 100644 index 00000000000..a49d9a1d4cc --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt @@ -0,0 +1,27 @@ +* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) + +Required properties: +- compatible: Should be "atmel,-usart" + The compatible indicated will be the first SoC to support an + additional mode or an USART new feature. +- reg: Should contain registers location and length +- interrupts: Should contain interrupt + +Optional properties: +- atmel,use-dma-rx: use of PDC or DMA for receiving data +- atmel,use-dma-tx: use of PDC or DMA for transmitting data + + compatible description: +- at91rm9200: legacy USART support +- at91sam9260: generic USART implementation for SAM9 SoCs + +Example: + + usart0: serial@fff8c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff8c000 0x4000>; + interrupts = <7>; + atmel,use-dma-rx; + atmel,use-dma-tx; + }; + -- cgit v1.2.3-70-g09d2