From d95faaec4763b94c9eedac9a1f933753015651ed Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 6 Mar 2014 16:38:38 +0200 Subject: phy: omap-control: Update DT binding information Move omap-control binding information to the right location. Acked-by: Kishon Vijay Abraham I Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/omap-usb.txt | 24 ---------------------- 1 file changed, 24 deletions(-) (limited to 'Documentation/devicetree/bindings/usb/omap-usb.txt') diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index c495135115c..38b2faec419 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -76,27 +76,3 @@ omap_dwc3 { ranges; }; -OMAP CONTROL USB - -Required properties: - - compatible: Should be one of - "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4. - "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register - e.g. USB2_PHY on OMAP5. - "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control - e.g. USB3 PHY and SATA PHY on OMAP5. - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on - DRA7 platform. - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on - AM437 platform. - - reg : Address and length of the register set for the device. It contains - the address of "otghs_control" for control-phy-otghs or "power" register - for other types. - - reg-names: should be "otghs_control" control-phy-otghs and "power" for - other types. - -omap_control_usb: omap-control-usb@4a002300 { - compatible = "ti,control-phy-otghs"; - reg = <0x4a00233c 0x4>; - reg-names = "otghs_control"; -}; -- cgit v1.2.3-70-g09d2