From 95e9fd10f06cb5642028b6b851e32b8c8afb4571 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sat, 4 Aug 2012 16:04:56 +1200 Subject: arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices Bindings for gpio, interrupt controller, power management controller, timer, realtime clock, serial uart, ehci and uhci controllers and framebuffer controllers used on the arch-vt8500 platform. Framebuffer binding also specifies a 'display' node which is required for determining the lcd panel data. Signed-off-by: Tony Prisk --- Documentation/devicetree/bindings/usb/platform-uhci.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/platform-uhci.txt (limited to 'Documentation/devicetree/bindings/usb/platform-uhci.txt') diff --git a/Documentation/devicetree/bindings/usb/platform-uhci.txt b/Documentation/devicetree/bindings/usb/platform-uhci.txt new file mode 100644 index 00000000000..a4fb0719d15 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/platform-uhci.txt @@ -0,0 +1,15 @@ +Generic Platform UHCI Controller +----------------------------------------------------- + +Required properties: +- compatible : "platform-uhci" +- reg : Should contain 1 register ranges(address and length) +- interrupts : UHCI controller interrupt + +Example: + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + }; -- cgit v1.2.3-70-g09d2