From f884ab15afdc5514e88105c92a4e2e1e6539869a Mon Sep 17 00:00:00 2001 From: Anatol Pomozov Date: Wed, 8 May 2013 16:56:16 -0700 Subject: doc: fix misspellings with 'codespell' tool Signed-off-by: Anatol Pomozov Signed-off-by: Jiri Kosina --- Documentation/devicetree/bindings/usb/am33xx-usb.txt | 2 +- Documentation/devicetree/bindings/usb/omap-usb.txt | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings/usb') diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index ea840f7f925..dc9dc8c87f1 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -12,7 +12,7 @@ AM33XX MUSB GLUE represents PERIPHERAL. - port1-mode : Should be "1" to represent HOST. "3" signifies OTG and "2" represents PERIPHERAL. - - power : Should be "250". This signifies the controller can supply upto + - power : Should be "250". This signifies the controller can supply up to 500mA when operating in host mode. Example: diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index d4769f343d6..57e71f6817d 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -16,7 +16,7 @@ OMAP MUSB GLUE specifying ULPI and UTMI respectively. - mode : Should be "3" to represent OTG. "1" signifies HOST and "2" represents PERIPHERAL. - - power : Should be "50". This signifies the controller can supply upto + - power : Should be "50". This signifies the controller can supply up to 100mA when operating in host mode. - usb-phy : the phandle for the PHY device -- cgit v1.2.3-70-g09d2