From c9aeb249bf72edcf1ca28fe301fb3cbb53cb23d8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Sun, 10 Nov 2013 23:56:43 -0800 Subject: Input: ti_am335x_tsc - fix spelling mistake in TSC/ADC DT binding There was a spelling mistake on TSC/ADC binding where "coordinate" was spelled as "coordiante". We can't simply fix the error due to DT being an ABI, the approach taken was to first use correct spelling and if that fails, fall back to miss-spelled version. It's unfortunate that has creeped into the tree. Signed-off-by: Felipe Balbi Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt index 491c97b7838..878549ba814 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt @@ -6,7 +6,7 @@ Required properties: ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen support on the platform. ti,x-plate-resistance: X plate resistance - ti,coordiante-readouts: The sequencer supports a total of 16 + ti,coordinate-readouts: The sequencer supports a total of 16 programmable steps each step is used to read a single coordinate. A single readout is enough but multiple reads can -- cgit v1.2.3-70-g09d2