From 03daa99ef50873651e363fc12ae0b5facdb3f831 Mon Sep 17 00:00:00 2001 From: Minghuan Lian Date: Fri, 21 Jun 2013 18:59:12 +0800 Subject: powerpc/dts: update MSI bindings doc for MPIC v4.3 Add compatible "fsl,mpic-msi-v4.3" for MPIC v4.3. MPIC v4.3 contains MSIIR and MSIIR1. MSIIR supports 8 MSI registers and MSIIR1 supports 16 MSI registers, but uses different IBS and SRS shift. When using MSIR1, the interrupt number is not consecutive. It is hard to use 'msi-available-ranges' to describe the ranges of the available interrupt, so MPIC v4.3 does not support this property. Signed-off-by: Minghuan Lian [scottwood@freescale.com: minor grammar fixes] Signed-off-by: Scott Wood --- .../devicetree/bindings/powerpc/fsl/msi-pic.txt | 53 +++++++++++++++++----- 1 file changed, 41 insertions(+), 12 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt index 5693877ab37..82dd5b65cf4 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt @@ -1,21 +1,20 @@ * Freescale MSI interrupt controller Required properties: -- compatible : compatible list, contains 2 entries, - first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, - etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on - the parent type. +- compatible : compatible list, may contain one or two entries + The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, + etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or + "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic + version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is + provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3" + should be used. The first entry is optional; the second entry is + required. - reg : It may contain one or two regions. The first region should contain the address and the length of the shared message interrupt register set. - The second region should contain the address of aliased MSIIR register for - platforms that have such an alias. - -- msi-available-ranges: use style section to define which - msi interrupt can be used in the 256 msi interrupts. This property is - optional, without this, all the 256 MSI interrupts can be used. - Each available range must begin and end on a multiple of 32 (i.e. - no splitting an individual MSI register or the associated PIC interrupt). + The second region should contain the address of aliased MSIIR or MSIIR1 + register for platforms that have such an alias, if using MSIIR1, the second + region must be added because different MSI group has different MSIIR1 offset. - interrupts : each one of the interrupts here is one entry per 32 MSIs, and routed to the host interrupt controller. the interrupts should @@ -28,6 +27,14 @@ Required properties: to MPIC. Optional properties: +- msi-available-ranges: use style section to define which + msi interrupt can be used in the 256 msi interrupts. This property is + optional, without this, all the MSI interrupts can be used. + Each available range must begin and end on a multiple of 32 (i.e. + no splitting an individual MSI register or the associated PIC interrupt). + MPIC v4.3 does not support this property because the 32 interrupts of an + individual register are not continuous when using MSIIR1. + - msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register is used for MSI messaging. The address of MSIIR in PCI address space is the MSI message address. @@ -54,6 +61,28 @@ Example: interrupt-parent = <&mpic>; }; + msi@41600 { + compatible = "fsl,mpic-msi-v4.3"; + reg = <0x41600 0x200 0x44148 4>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0 + 0x100 0 0 0 + 0x101 0 0 0 + 0x102 0 0 0 + 0x103 0 0 0 + 0x104 0 0 0 + 0x105 0 0 0 + 0x106 0 0 0 + 0x107 0 0 0>; + }; + The Freescale hypervisor and msi-address-64 ------------------------------------------- Normally, PCI devices have access to all of CCSR via an ATMU mapping. The -- cgit v1.2.3-70-g09d2 From afb41a35ef26c564765e6b47925b9d8a29cf529f Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Fri, 2 Aug 2013 14:39:09 +0800 Subject: powerpc/85xx: Add SEC6.0 device tree Add device tree for SEC 6.0 used on C29x silicon. Signed-off-by: Mingkai Hu Signed-off-by: Po Liu Signed-off-by: Scott Wood --- .../devicetree/bindings/crypto/fsl-sec6.txt | 157 +++++++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi | 56 ++++++++ 2 files changed, 213 insertions(+) create mode 100644 Documentation/devicetree/bindings/crypto/fsl-sec6.txt create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt new file mode 100644 index 00000000000..c0a20cd972e --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt @@ -0,0 +1,157 @@ +SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM). +Currently Freescale powerpc chip C29X is embeded with SEC 6. +SEC 6 device tree binding include: + -SEC 6 Node + -Job Ring Node + -Full Example + +===================================================================== +SEC 6 Node + +Description + + Node defines the base address of the SEC 6 block. + This block specifies the address range of all global + configuration registers for the SEC 6 block. + For example, In C293, we could see three SEC 6 node. + +PROPERTIES + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,sec-v6.0". + + - fsl,sec-era + Usage: optional + Value type: + Definition: A standard property. Define the 'ERA' of the SEC + device. + + - #address-cells + Usage: required + Value type: + Definition: A standard property. Defines the number of cells + for representing physical addresses in child nodes. + + - #size-cells + Usage: required + Value type: + Definition: A standard property. Defines the number of cells + for representing the size of physical addresses in + child nodes. + + - reg + Usage: required + Value type: + Definition: A standard property. Specifies the physical + address and length of the SEC 6 configuration registers. + + - ranges + Usage: required + Value type: + Definition: A standard property. Specifies the physical address + range of the SEC 6.0 register space (-SNVS not included). A + triplet that includes the child address, parent address, & + length. + + Note: All other standard properties (see the ePAPR) are allowed + but are optional. + +EXAMPLE + crypto@a0000 { + compatible = "fsl,sec-v6.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xa0000 0x20000>; + ranges = <0 0xa0000 0x20000>; + }; + +===================================================================== +Job Ring (JR) Node + + Child of the crypto node defines data processing interface to SEC 6 + across the peripheral bus for purposes of processing + cryptographic descriptors. The specified address + range can be made visible to one (or more) cores. + The interrupt defined for this node is controlled within + the address range of this node. + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,sec-v6.0-job-ring". + + - reg + Usage: required + Value type: + Definition: Specifies a two JR parameters: an offset from + the parent physical address and the length the JR registers. + + - interrupts + Usage: required + Value type: + Definition: Specifies the interrupts generated by this + device. The value of the interrupts property + consists of one interrupt specifier. The format + of the specifier is defined by the binding document + describing the node's interrupt parent. + +EXAMPLE + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <49 2 0 0>; + }; + +=================================================================== +Full Example + +Since some chips may contain more than one SEC, the dtsi contains +only the node contents, not the node itself. A chip using the SEC +should include the dtsi inside each SEC node. Example: + +In qoriq-sec6.0.dtsi: + + compatible = "fsl,sec-v6.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + }; + + jr@2000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + }; + +In the C293 device tree, we add the include of public property: + + crypto@a0000 { + /include/ "qoriq-sec6.0.dtsi" + } + + crypto@a0000 { + reg = <0xa0000 0x20000>; + ranges = <0 0xa0000 0x20000>; + + jr@1000 { + interrupts = <49 2 0 0>; + }; + + jr@2000 { + interrupts = <50 2 0 0>; + }; + }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi new file mode 100644 index 00000000000..f75b4f820c3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi @@ -0,0 +1,56 @@ +/* + * QorIQ Sec/Crypto 6.0 device tree stub + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + compatible = "fsl,sec-v6.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + }; + + jr@2000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + }; -- cgit v1.2.3-70-g09d2