From 3f823c15d53dc78b50d6f561caf36e8109df1193 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 11 Dec 2013 13:04:27 -0800 Subject: net: smc91x: Fix device tree based configuration so it's usable Commit 89ce376c6bdc (drivers/net: Use of_match_ptr() macro in smc91x.c) added minimal device tree support to smc91x, but it's not working on many platforms because of the lack of some key configuration bits. Fix the issue by parsing the necessary configuration like the smc911x driver is doing. As most smc91x users seem to use 16-bit access, let's default to that if no reg-io-width is specified. Cc: Nicolas Pitre Cc: Mark Rutland Cc: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/smsc-lan91c111.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt index 953049b4248..5a41a8658da 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt @@ -8,3 +8,7 @@ Required properties: Optional properties: - phy-device : phandle to Ethernet phy - local-mac-address : Ethernet mac address to use +- reg-io-width : Mask of sizes (in bytes) of the IO accesses that + are supported on the device. Valid value for SMSC LAN91c111 are + 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning + 16-bit access only. -- cgit v1.2.3-70-g09d2