From b9c7aff481f19dd655ae3ce6513817d625e2d47c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 29 May 2012 11:18:51 -0700 Subject: drivers/thermal/spear_thermal.c: add Device Tree probing capability SPEAr platforms now support DT and so must convert all drivers to support DT. This patch adds DT probing support for SPEAr thermal sensor driver and updates its documentation too. Also, as SPEAr is the only user of this driver and is only available with DT, make this an only DT driver. So, platform_data is completely removed and passed via DT now. Signed-off-by: Viresh Kumar Cc: Dan Carpenter Reviewed-by: Vincenzo Frascino Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- .../devicetree/bindings/thermal/spear-thermal.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/spear-thermal.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/thermal/spear-thermal.txt b/Documentation/devicetree/bindings/thermal/spear-thermal.txt new file mode 100644 index 00000000000..93e3b67c102 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/spear-thermal.txt @@ -0,0 +1,14 @@ +* SPEAr Thermal + +Required properties: +- compatible : "st,thermal-spear1340" +- reg : Address range of the thermal registers +- st,thermal-flags: flags used to enable thermal sensor + +Example: + + thermal@fc000000 { + compatible = "st,thermal-spear1340"; + reg = <0xfc000000 0x1000>; + st,thermal-flags = <0x7000>; + }; -- cgit v1.2.3-70-g09d2