From 58687acba59266735adb8ccd9b5b9aa2c7cd205b Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Fri, 7 May 2010 17:11:44 -0400 Subject: lockup_detector: Combine nmi_watchdog and softlockup detector The new nmi_watchdog (which uses the perf event subsystem) is very similar in structure to the softlockup detector. Using Ingo's suggestion, I combined the two functionalities into one file: kernel/watchdog.c. Now both the nmi_watchdog (or hardlockup detector) and softlockup detector sit on top of the perf event subsystem, which is run every 60 seconds or so to see if there are any lockups. To detect hardlockups, cpus not responding to interrupts, I implemented an hrtimer that runs 5 times for every perf event overflow event. If that stops counting on a cpu, then the cpu is most likely in trouble. To detect softlockups, tasks not yielding to the scheduler, I used the previous kthread idea that now gets kicked every time the hrtimer fires. If the kthread isn't being scheduled neither is anyone else and the warning is printed to the console. I tested this on x86_64 and both the softlockup and hardlockup paths work. V2: - cleaned up the Kconfig and softlockup combination - surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI - seperated out the softlockup case from perf event subsystem - re-arranged the enabling/disabling nmi watchdog from proc space - added cpumasks for hardlockup failure cases - removed fallback to soft events if no PMU exists for hard events V3: - comment cleanups - drop support for older softlockup code - per_cpu cleanups - completely remove software clock base hardlockup detector - use per_cpu masking on hard/soft lockup detection - #ifdef cleanups - rename config option NMI_WATCHDOG to LOCKUP_DETECTOR - documentation additions V4: - documentation fixes - convert per_cpu to __get_cpu_var - powerpc compile fixes V5: - split apart warn flags for hard and soft lockups TODO: - figure out how to make an arch-agnostic clock2cycles call (if possible) to feed into perf events as a sample period [fweisbec: merged conflict patch] Signed-off-by: Don Zickus Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Cyrill Gorcunov Cc: Eric Paris Cc: Randy Dunlap LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com> Signed-off-by: Frederic Weisbecker --- Documentation/kernel-parameters.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 839b21b0699..dfe8d1c226c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1777,6 +1777,8 @@ and is between 256 and 4096 characters. It is defined in the file nousb [USB] Disable the USB subsystem + nowatchdog [KNL] Disable the lockup detector. + nowb [ARM] nox2apic [X86-64,APIC] Do not enable x2APIC mode. -- cgit v1.2.3-70-g09d2 From bcfde3347cadfc8967e9481b5a9ceae16ef95e38 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 7 Jun 2010 17:10:38 -0700 Subject: sound: move driver parameters to their own files Move sound (OSS & ALSA) kernel parameters to their own files. Signed-off-by: Randy Dunlap Signed-off-by: Takashi Iwai --- Documentation/kernel-parameters.txt | 167 +-------------------------- Documentation/sound/alsa/alsa-parameters.txt | 135 ++++++++++++++++++++++ Documentation/sound/oss/oss-parameters.txt | 51 ++++++++ 3 files changed, 192 insertions(+), 161 deletions(-) create mode 100644 Documentation/sound/alsa/alsa-parameters.txt create mode 100644 Documentation/sound/oss/oss-parameters.txt (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1808f1157f3..8d443e750e1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -280,19 +280,12 @@ and is between 256 and 4096 characters. It is defined in the file no: ACPI OperationRegions are not marked as reserved, no further checks are performed. - ad1848= [HW,OSS] - Format: ,,,, - add_efi_memmap [EFI; X86] Include EFI memory map in kernel's map of available physical RAM. advansys= [HW,SCSI] See header of drivers/scsi/advansys.c. - aedsp16= [HW,OSS] Audio Excel DSP 16 - Format: ,,,,, - See also header of sound/oss/aedsp16.c. - agp= [AGP] { off | try_unsupported } off: disable AGP support @@ -311,6 +304,9 @@ and is between 256 and 4096 characters. It is defined in the file aic79xx= [HW,SCSI] See Documentation/scsi/aic79xx.txt. + ALSA [HW,ALSA] + See Documentation/sound/alsa/alsa-parameters.txt + alignment= [KNL,ARM] Allow the default userspace alignment fault handler behaviour to be specified. Bit 0 enables warnings, @@ -655,8 +651,6 @@ and is between 256 and 4096 characters. It is defined in the file Disable PIN 1 of APIC timer Can be useful to work around chipset bugs. - dmasound= [HW,OSS] Sound subsystem buffers - dma_debug=off If the kernel is compiled with DMA_API_DEBUG support, this option disables the debugging code at boot. @@ -1523,9 +1517,6 @@ and is between 256 and 4096 characters. It is defined in the file that the amount of memory usable for all allocations is not too small. - mpu401= [HW,OSS] - Format: , - MTD_Partition= [MTD] Format: ,,, @@ -1849,9 +1840,6 @@ and is between 256 and 4096 characters. It is defined in the file For example, to override I2C bus2: omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100 - opl3= [HW,OSS] - Format: - oprofile.timer= [HW] Use timer interrupt instead of performance counters @@ -1863,6 +1851,9 @@ and is between 256 and 4096 characters. It is defined in the file perfmon on Intel CPUs instead of the CPU specific event set. + OSS [HW,OSS] + See Documentation/sound/oss/oss-parameters.txt + osst= [HW,SCSI] SCSI Tape Driver Format: , See also Documentation/scsi/st.txt. @@ -1899,9 +1890,6 @@ and is between 256 and 4096 characters. It is defined in the file Currently this function knows 686a and 8231 chips. Format: [spp|ps2|epp|ecp|ecpepp] - pas2= [HW,OSS] Format: - ,,,,,,, - pas16= [HW,SCSI] See header of drivers/scsi/pas16.c. @@ -2169,10 +2157,6 @@ and is between 256 and 4096 characters. It is defined in the file [HW,MOUSE] Controls Logitech smartscroll autorepeat. 0 = disabled, 1 = enabled (default). - pss= [HW,OSS] Personal Sound System (ECHO ESC614) - Format: - ,,,,, - pt. [PARIDE] See Documentation/blockdev/paride.txt. @@ -2381,128 +2365,6 @@ and is between 256 and 4096 characters. It is defined in the file 1: Fast pin select (default) 2: ATC IRMode - snd-ad1816a= [HW,ALSA] - - snd-ad1848= [HW,ALSA] - - snd-ali5451= [HW,ALSA] - - snd-als100= [HW,ALSA] - - snd-als4000= [HW,ALSA] - - snd-azt2320= [HW,ALSA] - - snd-cmi8330= [HW,ALSA] - - snd-cmipci= [HW,ALSA] - - snd-cs4231= [HW,ALSA] - - snd-cs4232= [HW,ALSA] - - snd-cs4236= [HW,ALSA] - - snd-cs4281= [HW,ALSA] - - snd-cs46xx= [HW,ALSA] - - snd-dt019x= [HW,ALSA] - - snd-dummy= [HW,ALSA] - - snd-emu10k1= [HW,ALSA] - - snd-ens1370= [HW,ALSA] - - snd-ens1371= [HW,ALSA] - - snd-es968= [HW,ALSA] - - snd-es1688= [HW,ALSA] - - snd-es18xx= [HW,ALSA] - - snd-es1938= [HW,ALSA] - - snd-es1968= [HW,ALSA] - - snd-fm801= [HW,ALSA] - - snd-gusclassic= [HW,ALSA] - - snd-gusextreme= [HW,ALSA] - - snd-gusmax= [HW,ALSA] - - snd-hdsp= [HW,ALSA] - - snd-ice1712= [HW,ALSA] - - snd-intel8x0= [HW,ALSA] - - snd-interwave= [HW,ALSA] - - snd-interwave-stb= - [HW,ALSA] - - snd-korg1212= [HW,ALSA] - - snd-maestro3= [HW,ALSA] - - snd-mpu401= [HW,ALSA] - - snd-mtpav= [HW,ALSA] - - snd-nm256= [HW,ALSA] - - snd-opl3sa2= [HW,ALSA] - - snd-opti92x-ad1848= - [HW,ALSA] - - snd-opti92x-cs4231= - [HW,ALSA] - - snd-opti93x= [HW,ALSA] - - snd-pmac= [HW,ALSA] - - snd-rme32= [HW,ALSA] - - snd-rme96= [HW,ALSA] - - snd-rme9652= [HW,ALSA] - - snd-sb8= [HW,ALSA] - - snd-sb16= [HW,ALSA] - - snd-sbawe= [HW,ALSA] - - snd-serial= [HW,ALSA] - - snd-sgalaxy= [HW,ALSA] - - snd-sonicvibes= [HW,ALSA] - - snd-sun-amd7930= - [HW,ALSA] - - snd-sun-cs4231= [HW,ALSA] - - snd-trident= [HW,ALSA] - - snd-usb-audio= [HW,ALSA,USB] - - snd-via82xx= [HW,ALSA] - - snd-virmidi= [HW,ALSA] - - snd-wavefront= [HW,ALSA] - - snd-ymfpci= [HW,ALSA] - softlockup_panic= [KNL] Should the soft-lockup detector generate panics. @@ -2517,9 +2379,6 @@ and is between 256 and 4096 characters. It is defined in the file spia_pedr= spia_peddr= - sscape= [HW,OSS] - Format: ,,,, - st= [HW,SCSI] SCSI tape parameters (buffers, etc.) See Documentation/scsi/st.txt. @@ -2659,10 +2518,6 @@ and is between 256 and 4096 characters. It is defined in the file to facilitate early boot debugging. See also Documentation/trace/events.txt - trix= [HW,OSS] MediaTrix AudioTrix Pro - Format: - ,,,,,,,, - tsc= Disable clocksource-must-verify flag for TSC. Format: [x86] reliable: mark tsc clocksource as reliable, this @@ -2679,12 +2534,6 @@ and is between 256 and 4096 characters. It is defined in the file u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter See header of drivers/scsi/u14-34f.c. - uart401= [HW,OSS] - Format: , - - uart6850= [HW,OSS] - Format: , - uhash_entries= [KNL,NET] Set number of hash buckets for UDP/UDP-Lite connections @@ -2850,9 +2699,6 @@ and is between 256 and 4096 characters. It is defined in the file overridden by individual drivers. 0 will hide cursors, 1 will display them. - waveartist= [HW,OSS] - Format: ,,, - wd33c93= [HW,SCSI] See header of drivers/scsi/wd33c93.c. @@ -2885,5 +2731,4 @@ ______________________________________________________________________ TODO: - Add documentation for ALSA options. Add more DRM drivers. diff --git a/Documentation/sound/alsa/alsa-parameters.txt b/Documentation/sound/alsa/alsa-parameters.txt new file mode 100644 index 00000000000..0fa40679b08 --- /dev/null +++ b/Documentation/sound/alsa/alsa-parameters.txt @@ -0,0 +1,135 @@ + ALSA Kernel Parameters + ~~~~~~~~~~~~~~~~~~~~~~ + +See Documentation/kernel-parameters.txt for general information on +specifying module parameters. + +This document may not be entirely up to date and comprehensive. The command +"modinfo -p ${modulename}" shows a current list of all parameters of a loadable +module. Loadable modules, after being loaded into the running kernel, also +reveal their parameters in /sys/module/${modulename}/parameters/. Some of these +parameters may be changed at runtime by the command +"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}". + + + snd-ad1816a= [HW,ALSA] + + snd-ad1848= [HW,ALSA] + + snd-ali5451= [HW,ALSA] + + snd-als100= [HW,ALSA] + + snd-als4000= [HW,ALSA] + + snd-azt2320= [HW,ALSA] + + snd-cmi8330= [HW,ALSA] + + snd-cmipci= [HW,ALSA] + + snd-cs4231= [HW,ALSA] + + snd-cs4232= [HW,ALSA] + + snd-cs4236= [HW,ALSA] + + snd-cs4281= [HW,ALSA] + + snd-cs46xx= [HW,ALSA] + + snd-dt019x= [HW,ALSA] + + snd-dummy= [HW,ALSA] + + snd-emu10k1= [HW,ALSA] + + snd-ens1370= [HW,ALSA] + + snd-ens1371= [HW,ALSA] + + snd-es968= [HW,ALSA] + + snd-es1688= [HW,ALSA] + + snd-es18xx= [HW,ALSA] + + snd-es1938= [HW,ALSA] + + snd-es1968= [HW,ALSA] + + snd-fm801= [HW,ALSA] + + snd-gusclassic= [HW,ALSA] + + snd-gusextreme= [HW,ALSA] + + snd-gusmax= [HW,ALSA] + + snd-hdsp= [HW,ALSA] + + snd-ice1712= [HW,ALSA] + + snd-intel8x0= [HW,ALSA] + + snd-interwave= [HW,ALSA] + + snd-interwave-stb= + [HW,ALSA] + + snd-korg1212= [HW,ALSA] + + snd-maestro3= [HW,ALSA] + + snd-mpu401= [HW,ALSA] + + snd-mtpav= [HW,ALSA] + + snd-nm256= [HW,ALSA] + + snd-opl3sa2= [HW,ALSA] + + snd-opti92x-ad1848= + [HW,ALSA] + + snd-opti92x-cs4231= + [HW,ALSA] + + snd-opti93x= [HW,ALSA] + + snd-pmac= [HW,ALSA] + + snd-rme32= [HW,ALSA] + + snd-rme96= [HW,ALSA] + + snd-rme9652= [HW,ALSA] + + snd-sb8= [HW,ALSA] + + snd-sb16= [HW,ALSA] + + snd-sbawe= [HW,ALSA] + + snd-serial= [HW,ALSA] + + snd-sgalaxy= [HW,ALSA] + + snd-sonicvibes= [HW,ALSA] + + snd-sun-amd7930= + [HW,ALSA] + + snd-sun-cs4231= [HW,ALSA] + + snd-trident= [HW,ALSA] + + snd-usb-audio= [HW,ALSA,USB] + + snd-via82xx= [HW,ALSA] + + snd-virmidi= [HW,ALSA] + + snd-wavefront= [HW,ALSA] + + snd-ymfpci= [HW,ALSA] diff --git a/Documentation/sound/oss/oss-parameters.txt b/Documentation/sound/oss/oss-parameters.txt new file mode 100644 index 00000000000..3ab391e7c29 --- /dev/null +++ b/Documentation/sound/oss/oss-parameters.txt @@ -0,0 +1,51 @@ + OSS Kernel Parameters + ~~~~~~~~~~~~~~~~~~~~~ + +See Documentation/kernel-parameters.txt for general information on +specifying module parameters. + +This document may not be entirely up to date and comprehensive. The command +"modinfo -p ${modulename}" shows a current list of all parameters of a loadable +module. Loadable modules, after being loaded into the running kernel, also +reveal their parameters in /sys/module/${modulename}/parameters/. Some of these +parameters may be changed at runtime by the command +"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}". + + + ad1848= [HW,OSS] + Format: ,,,, + + aedsp16= [HW,OSS] Audio Excel DSP 16 + Format: ,,,,, + See also header of sound/oss/aedsp16.c. + + dmasound= [HW,OSS] Sound subsystem buffers + + mpu401= [HW,OSS] + Format: , + + opl3= [HW,OSS] + Format: + + pas2= [HW,OSS] Format: + ,,,,,,, + + pss= [HW,OSS] Personal Sound System (ECHO ESC614) + Format: + ,,,,, + + sscape= [HW,OSS] + Format: ,,,, + + trix= [HW,OSS] MediaTrix AudioTrix Pro + Format: + ,,,,,,,, + + uart401= [HW,OSS] + Format: , + + uart6850= [HW,OSS] + Format: , + + waveartist= [HW,OSS] + Format: ,,, -- cgit v1.2.3-70-g09d2 From d70a011dbbaa6335a19deb63ec3eb613f48faafd Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Fri, 25 Jun 2010 14:46:56 +0200 Subject: netfilter: complete the deprecation of CONFIG_NF_CT_ACCT CONFIG_NF_CT_ACCT has been deprecated for awhile and was originally scheduled for removal by 2.6.29. Removing support for this config option also stops this deprecation warning message in the kernel log. [ 61.669627] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 61.669850] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 61.669852] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 61.669853] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Signed-off-by: Tim Gardner [Patrick: changed default value to 0] Signed-off-by: Patrick McHardy --- Documentation/feature-removal-schedule.txt | 9 --------- Documentation/kernel-parameters.txt | 3 +-- net/netfilter/Kconfig | 22 ---------------------- net/netfilter/nf_conntrack_acct.c | 14 +------------- 4 files changed, 2 insertions(+), 46 deletions(-) (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 672be0109d0..92f021aac92 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -303,15 +303,6 @@ Who: Johannes Berg --------------------------- -What: CONFIG_NF_CT_ACCT -When: 2.6.29 -Why: Accounting can now be enabled/disabled without kernel recompilation. - Currently used only to set a default value for a feature that is also - controlled by a kernel/module/sysfs/sysctl parameter. -Who: Krzysztof Piotr Oledzki - ---------------------------- - What: sysfs ui for changing p4-clockmod parameters When: September 2009 Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1808f1157f3..cee62515ffa 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1597,8 +1597,7 @@ and is between 256 and 4096 characters. It is defined in the file [NETFILTER] Enable connection tracking flow accounting 0 to disable accounting 1 to enable accounting - Default value depends on CONFIG_NF_CT_ACCT that is - going to be removed in 2.6.29. + Default value is 0. nfsaddrs= [NFS] See Documentation/filesystems/nfs/nfsroot.txt. diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 21be5359898..aa2f106347e 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -40,27 +40,6 @@ config NF_CONNTRACK if NF_CONNTRACK -config NF_CT_ACCT - bool "Connection tracking flow accounting" - depends on NETFILTER_ADVANCED - help - If this option is enabled, the connection tracking code will - keep per-flow packet and byte counters. - - Those counters can be used for flow-based accounting or the - `connbytes' match. - - Please note that currently this option only sets a default state. - You may change it at boot time with nf_conntrack.acct=0/1 kernel - parameter or by loading the nf_conntrack module with acct=0/1. - - You may also disable/enable it on a running system with: - sysctl net.netfilter.nf_conntrack_acct=0/1 - - This option will be removed in 2.6.29. - - If unsure, say `N'. - config NF_CONNTRACK_MARK bool 'Connection mark tracking support' depends on NETFILTER_ADVANCED @@ -630,7 +609,6 @@ config NETFILTER_XT_MATCH_CONNBYTES tristate '"connbytes" per-connection counter match support' depends on NF_CONNTRACK depends on NETFILTER_ADVANCED - select NF_CT_ACCT help This option adds a `connbytes' match, which allows you to match the number of bytes and/or packets for each direction within a connection. diff --git a/net/netfilter/nf_conntrack_acct.c b/net/netfilter/nf_conntrack_acct.c index ab81b380eae..5178c691ecb 100644 --- a/net/netfilter/nf_conntrack_acct.c +++ b/net/netfilter/nf_conntrack_acct.c @@ -17,13 +17,7 @@ #include #include -#ifdef CONFIG_NF_CT_ACCT -#define NF_CT_ACCT_DEFAULT 1 -#else -#define NF_CT_ACCT_DEFAULT 0 -#endif - -static int nf_ct_acct __read_mostly = NF_CT_ACCT_DEFAULT; +static int nf_ct_acct __read_mostly; module_param_named(acct, nf_ct_acct, bool, 0644); MODULE_PARM_DESC(acct, "Enable connection tracking flow accounting."); @@ -114,12 +108,6 @@ int nf_conntrack_acct_init(struct net *net) net->ct.sysctl_acct = nf_ct_acct; if (net_eq(net, &init_net)) { -#ifdef CONFIG_NF_CT_ACCT - printk(KERN_WARNING "CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use\n"); - printk(KERN_WARNING "nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or\n"); - printk(KERN_WARNING "sysctl net.netfilter.nf_conntrack_acct=1 to enable it.\n"); -#endif - ret = nf_ct_extend_register(&acct_extend); if (ret < 0) { printk(KERN_ERR "nf_conntrack_acct: Unable to register extension\n"); -- cgit v1.2.3-70-g09d2 From c1c5413ad58cb73267d328e6020268aa2e50d8ca Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Fri, 14 May 2010 12:44:30 +0100 Subject: x86: Unplug emulated disks and nics. Add a xen_emul_unplug command line option to the kernel to unplug xen emulated disks and nics. Set the default value of xen_emul_unplug depending on whether or not the Xen PV frontends and the Xen platform PCI driver have been compiled for this kernel (modules or built-in are both OK). The user can specify xen_emul_unplug=ignore to enable PV drivers on HVM even if the host platform doesn't support unplug. Signed-off-by: Stefano Stabellini Signed-off-by: Jeremy Fitzhardinge --- Documentation/kernel-parameters.txt | 11 +++ arch/x86/xen/Makefile | 2 +- arch/x86/xen/enlighten.c | 1 + arch/x86/xen/platform-pci-unplug.c | 135 ++++++++++++++++++++++++++++++++++++ arch/x86/xen/xen-ops.h | 1 + drivers/block/xen-blkfront.c | 17 +++++ drivers/xen/platform-pci.c | 6 ++ drivers/xen/xenbus/xenbus_probe.c | 4 ++ include/xen/platform_pci.h | 49 +++++++++++++ 9 files changed, 225 insertions(+), 1 deletion(-) create mode 100644 arch/x86/xen/platform-pci-unplug.c create mode 100644 include/xen/platform_pci.h (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 82d6aeb5228..eefcd805102 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -115,6 +115,7 @@ parameter is applicable: More X86-64 boot options can be found in Documentation/x86/x86_64/boot-options.txt . X86 Either 32bit or 64bit x86 (same as X86-32+X86-64) + XEN Xen support is enabled In addition, the following text indicates that the option: @@ -2879,6 +2880,16 @@ and is between 256 and 4096 characters. It is defined in the file xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks. xd_geo= See header of drivers/block/xd.c. + xen_emul_unplug= [HW,X86,XEN] + Unplug Xen emulated devices + Format: [unplug0,][unplug1] + ide-disks -- unplug primary master IDE devices + aux-ide-disks -- unplug non-primary-master IDE devices + nics -- unplug network devices + all -- unplug all emulated devices (NICs and IDE disks) + ignore -- continue loading the Xen platform PCI driver even + if the version check failed + xirc2ps_cs= [NET,PCMCIA] Format: ,,,,,[,[,[,]]] diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3bb4fc21f4f..93095468598 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -12,7 +12,7 @@ CFLAGS_mmu.o := $(nostackp) obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \ time.o xen-asm.o xen-asm_$(BITS).o \ - grant-table.o suspend.o + grant-table.o suspend.o platform-pci-unplug.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index a9017296388..157c93b62dd 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1314,6 +1314,7 @@ static void __init xen_hvm_guest_init(void) if (xen_feature(XENFEAT_hvm_callback_vector)) xen_have_vector_callback = 1; register_cpu_notifier(&xen_hvm_cpu_notifier); + xen_unplug_emulated_devices(); have_vcpu_info_placement = 0; x86_init.irqs.intr_init = xen_init_IRQ; xen_hvm_init_time_ops(); diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c new file mode 100644 index 00000000000..2f7f3fb3477 --- /dev/null +++ b/arch/x86/xen/platform-pci-unplug.c @@ -0,0 +1,135 @@ +/****************************************************************************** + * platform-pci-unplug.c + * + * Xen platform PCI device driver + * Copyright (c) 2010, Citrix + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + */ + +#include +#include +#include + +#include + +#define XEN_PLATFORM_ERR_MAGIC -1 +#define XEN_PLATFORM_ERR_PROTOCOL -2 +#define XEN_PLATFORM_ERR_BLACKLIST -3 + +/* store the value of xen_emul_unplug after the unplug is done */ +int xen_platform_pci_unplug; +EXPORT_SYMBOL_GPL(xen_platform_pci_unplug); +static int xen_emul_unplug; + +static int __init check_platform_magic(void) +{ + short magic; + char protocol; + + magic = inw(XEN_IOPORT_MAGIC); + if (magic != XEN_IOPORT_MAGIC_VAL) { + printk(KERN_ERR "Xen Platform PCI: unrecognised magic value\n"); + return XEN_PLATFORM_ERR_MAGIC; + } + + protocol = inb(XEN_IOPORT_PROTOVER); + + printk(KERN_DEBUG "Xen Platform PCI: I/O protocol version %d\n", + protocol); + + switch (protocol) { + case 1: + outw(XEN_IOPORT_LINUX_PRODNUM, XEN_IOPORT_PRODNUM); + outl(XEN_IOPORT_LINUX_DRVVER, XEN_IOPORT_DRVVER); + if (inw(XEN_IOPORT_MAGIC) != XEN_IOPORT_MAGIC_VAL) { + printk(KERN_ERR "Xen Platform: blacklisted by host\n"); + return XEN_PLATFORM_ERR_BLACKLIST; + } + break; + default: + printk(KERN_WARNING "Xen Platform PCI: unknown I/O protocol version"); + return XEN_PLATFORM_ERR_PROTOCOL; + } + + return 0; +} + +void __init xen_unplug_emulated_devices(void) +{ + int r; + + /* check the version of the xen platform PCI device */ + r = check_platform_magic(); + /* If the version matches enable the Xen platform PCI driver. + * Also enable the Xen platform PCI driver if the version is really old + * and the user told us to ignore it. */ + if (r && !(r == XEN_PLATFORM_ERR_MAGIC && + (xen_emul_unplug & XEN_UNPLUG_IGNORE))) + return; + /* Set the default value of xen_emul_unplug depending on whether or + * not the Xen PV frontends and the Xen platform PCI driver have + * been compiled for this kernel (modules or built-in are both OK). */ + if (!xen_emul_unplug) { + if (xen_must_unplug_nics()) { + printk(KERN_INFO "Netfront and the Xen platform PCI driver have " + "been compiled for this kernel: unplug emulated NICs.\n"); + xen_emul_unplug |= XEN_UNPLUG_ALL_NICS; + } + if (xen_must_unplug_disks()) { + printk(KERN_INFO "Blkfront and the Xen platform PCI driver have " + "been compiled for this kernel: unplug emulated disks.\n" + "You might have to change the root device\n" + "from /dev/hd[a-d] to /dev/xvd[a-d]\n" + "in your root= kernel command line option\n"); + xen_emul_unplug |= XEN_UNPLUG_ALL_IDE_DISKS; + } + } + /* Now unplug the emulated devices */ + if (!(xen_emul_unplug & XEN_UNPLUG_IGNORE)) + outw(xen_emul_unplug, XEN_IOPORT_UNPLUG); + xen_platform_pci_unplug = xen_emul_unplug; +} + +static int __init parse_xen_emul_unplug(char *arg) +{ + char *p, *q; + int l; + + for (p = arg; p; p = q) { + q = strchr(p, ','); + if (q) { + l = q - p; + q++; + } else { + l = strlen(p); + } + if (!strncmp(p, "all", l)) + xen_emul_unplug |= XEN_UNPLUG_ALL; + else if (!strncmp(p, "ide-disks", l)) + xen_emul_unplug |= XEN_UNPLUG_ALL_IDE_DISKS; + else if (!strncmp(p, "aux-ide-disks", l)) + xen_emul_unplug |= XEN_UNPLUG_AUX_IDE_DISKS; + else if (!strncmp(p, "nics", l)) + xen_emul_unplug |= XEN_UNPLUG_ALL_NICS; + else if (!strncmp(p, "ignore", l)) + xen_emul_unplug |= XEN_UNPLUG_IGNORE; + else + printk(KERN_WARNING "unrecognised option '%s' " + "in parameter 'xen_emul_unplug'\n", p); + } + return 0; +} +early_param("xen_emul_unplug", parse_xen_emul_unplug); diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 089d18923d2..ed776949024 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -40,6 +40,7 @@ void xen_vcpu_restore(void); void xen_callback_vector(void); void xen_hvm_init_shared_info(void); +void __init xen_unplug_emulated_devices(void); void __init xen_build_dynamic_phys_to_machine(void); diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 82ed403147c..6eb2989a9d0 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -48,6 +48,7 @@ #include #include #include +#include #include #include @@ -737,6 +738,22 @@ static int blkfront_probe(struct xenbus_device *dev, } } + /* no unplug has been done: do not hook devices != xen vbds */ + if (xen_hvm_domain() && (xen_platform_pci_unplug & XEN_UNPLUG_IGNORE)) { + int major; + + if (!VDEV_IS_EXTENDED(vdevice)) + major = BLKIF_MAJOR(vdevice); + else + major = XENVBD_MAJOR; + + if (major != XENVBD_MAJOR) { + printk(KERN_INFO + "%s: HVM does not support vbd %d as xen block device\n", + __FUNCTION__, vdevice); + return -ENODEV; + } + } info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) { xenbus_dev_fatal(dev, -ENOMEM, "allocating info structure"); diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c index bdb44f2473e..c01b5ddce52 100644 --- a/drivers/xen/platform-pci.c +++ b/drivers/xen/platform-pci.c @@ -27,6 +27,7 @@ #include #include +#include #include #include #include @@ -195,6 +196,11 @@ static struct pci_driver platform_driver = { static int __init platform_pci_module_init(void) { + /* no unplug has been done, IGNORE hasn't been specified: just + * return now */ + if (!xen_platform_pci_unplug) + return -ENODEV; + return pci_register_driver(&platform_driver); } diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index a9e83c438cb..37e8894b50d 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -56,6 +56,7 @@ #include #include +#include #include #include "xenbus_comms.h" @@ -977,6 +978,9 @@ static void wait_for_devices(struct xenbus_driver *xendrv) #ifndef MODULE static int __init boot_wait_for_devices(void) { + if (xen_hvm_domain() && !xen_platform_pci_unplug) + return -ENODEV; + ready_to_wait_for_devices = 1; wait_for_devices(NULL); return 0; diff --git a/include/xen/platform_pci.h b/include/xen/platform_pci.h new file mode 100644 index 00000000000..ce9d671c636 --- /dev/null +++ b/include/xen/platform_pci.h @@ -0,0 +1,49 @@ +#ifndef _XEN_PLATFORM_PCI_H +#define _XEN_PLATFORM_PCI_H + +#define XEN_IOPORT_MAGIC_VAL 0x49d2 +#define XEN_IOPORT_LINUX_PRODNUM 0x0003 +#define XEN_IOPORT_LINUX_DRVVER 0x0001 + +#define XEN_IOPORT_BASE 0x10 + +#define XEN_IOPORT_PLATFLAGS (XEN_IOPORT_BASE + 0) /* 1 byte access (R/W) */ +#define XEN_IOPORT_MAGIC (XEN_IOPORT_BASE + 0) /* 2 byte access (R) */ +#define XEN_IOPORT_UNPLUG (XEN_IOPORT_BASE + 0) /* 2 byte access (W) */ +#define XEN_IOPORT_DRVVER (XEN_IOPORT_BASE + 0) /* 4 byte access (W) */ + +#define XEN_IOPORT_SYSLOG (XEN_IOPORT_BASE + 2) /* 1 byte access (W) */ +#define XEN_IOPORT_PROTOVER (XEN_IOPORT_BASE + 2) /* 1 byte access (R) */ +#define XEN_IOPORT_PRODNUM (XEN_IOPORT_BASE + 2) /* 2 byte access (W) */ + +#define XEN_UNPLUG_ALL_IDE_DISKS 1 +#define XEN_UNPLUG_ALL_NICS 2 +#define XEN_UNPLUG_AUX_IDE_DISKS 4 +#define XEN_UNPLUG_ALL 7 +#define XEN_UNPLUG_IGNORE 8 + +static inline int xen_must_unplug_nics(void) { +#if (defined(CONFIG_XEN_NETDEV_FRONTEND) || \ + defined(CONFIG_XEN_NETDEV_FRONTEND_MODULE)) && \ + (defined(CONFIG_XEN_PLATFORM_PCI) || \ + defined(CONFIG_XEN_PLATFORM_PCI_MODULE)) + return 1; +#else + return 0; +#endif +} + +static inline int xen_must_unplug_disks(void) { +#if (defined(CONFIG_XEN_BLKDEV_FRONTEND) || \ + defined(CONFIG_XEN_BLKDEV_FRONTEND_MODULE)) && \ + (defined(CONFIG_XEN_PLATFORM_PCI) || \ + defined(CONFIG_XEN_PLATFORM_PCI_MODULE)) + return 1; +#else + return 0; +#endif +} + +extern int xen_platform_pci_unplug; + +#endif /* _XEN_PLATFORM_PCI_H */ -- cgit v1.2.3-70-g09d2 From 592913ecb87a9e06f98ddb55b298f1a66bf94c6b Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 13 Jul 2010 17:56:20 -0700 Subject: time: Kill off CONFIG_GENERIC_TIME Now that all arches have been converted over to use generic time via clocksources or arch_gettimeoffset(), we can remove the GENERIC_TIME config option and simplify the generic code. Signed-off-by: John Stultz LKML-Reference: <1279068988-21864-4-git-send-email-johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner --- Documentation/kernel-parameters.txt | 3 +- arch/alpha/Kconfig | 4 --- arch/arm/Kconfig | 4 --- arch/avr32/Kconfig | 3 -- arch/blackfin/Kconfig | 3 -- arch/cris/Kconfig | 3 -- arch/frv/Kconfig | 4 --- arch/h8300/Kconfig | 4 --- arch/ia64/Kconfig | 4 --- arch/m32r/Kconfig | 3 -- arch/m68k/Kconfig | 3 -- arch/m68knommu/Kconfig | 4 --- arch/microblaze/Kconfig | 3 -- arch/mips/Kconfig | 4 --- arch/mn10300/Kconfig | 3 -- arch/parisc/Kconfig | 4 --- arch/powerpc/Kconfig | 3 -- arch/s390/Kconfig | 3 -- arch/score/Kconfig | 3 -- arch/sh/Kconfig | 3 -- arch/sparc/Kconfig | 3 -- arch/um/Kconfig.common | 4 --- arch/x86/Kconfig | 5 +--- arch/xtensa/Kconfig | 3 -- drivers/Makefile | 4 ++- drivers/acpi/acpi_pad.c | 2 +- drivers/acpi/processor_idle.c | 2 +- drivers/misc/Kconfig | 4 +-- kernel/time.c | 16 ----------- kernel/time/Kconfig | 4 +-- kernel/time/clocksource.c | 4 +-- kernel/time/timekeeping.c | 55 +++---------------------------------- kernel/trace/Kconfig | 4 +-- 33 files changed, 19 insertions(+), 159 deletions(-) (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2b2407d9a6d..8abdfd7cb57 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -73,7 +73,6 @@ parameter is applicable: MTD MTD (Memory Technology Device) support is enabled. NET Appropriate network support is enabled. NUMA NUMA support is enabled. - GENERIC_TIME The generic timeofday code is enabled. NFS Appropriate NFS support is enabled. OSS OSS sound support is enabled. PV_OPS A paravirtualized kernel is enabled. @@ -468,7 +467,7 @@ and is between 256 and 4096 characters. It is defined in the file clocksource is not available, it defaults to PIT. Format: { pit | tsc | cyclone | pmtmr } - clocksource= [GENERIC_TIME] Override the default clocksource + clocksource= Override the default clocksource Format: Override the default clocksource and use the clocksource with the name specified. diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 3e2e540a0f2..b9647bb66d1 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -47,10 +47,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_TIME - bool - default y - config GENERIC_CMOS_UPDATE def_bool y diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 98922f7d2d1..655b4ae7631 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -41,10 +41,6 @@ config SYS_SUPPORTS_APM_EMULATION config GENERIC_GPIO bool -config GENERIC_TIME - bool - default y - config ARCH_USES_GETTIMEOFFSET bool default n diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index f2b31933318..f51572772e2 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -45,9 +45,6 @@ config GENERIC_IRQ_PROBE config RWSEM_GENERIC_SPINLOCK def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_CLOCKEVENTS def_bool y diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index f66294b4f9d..c88fd358412 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -614,9 +614,6 @@ comment "Kernel Timer/Scheduler" source kernel/Kconfig.hz -config GENERIC_TIME - def_bool y - config GENERIC_CLOCKEVENTS bool "Generic clock events" default y diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index e25bf4440b5..887ef855be2 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -20,9 +20,6 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool -config GENERIC_TIME - def_bool y - config GENERIC_CMOS_UPDATE def_bool y diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 4b5830bcbe2..16399bd2499 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -40,10 +40,6 @@ config GENERIC_HARDIRQS_NO__DO_IRQ bool default y -config GENERIC_TIME - bool - default y - config TIME_LOW_RES bool default y diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 53cc669e6d5..988b6ff34cc 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -62,10 +62,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_TIME - bool - default y - config GENERIC_BUG bool depends on BUG diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 95610820041..8711d13cd79 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -82,10 +82,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_TIME - bool - default y - config GENERIC_TIME_VSYSCALL bool default y diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 3a9319f93e8..836abbbc9c0 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -44,9 +44,6 @@ config HZ int default 100 -config GENERIC_TIME - def_bool y - config ARCH_USES_GETTIMEOFFSET def_bool y diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 2e3737b92ff..8030e2481d9 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -59,9 +59,6 @@ config HZ int default 100 -config GENERIC_TIME - def_bool y - config ARCH_USES_GETTIMEOFFSET def_bool y diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index efeb6033fc1..2609c394e1d 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -63,10 +63,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_TIME - bool - default y - config GENERIC_CMOS_UPDATE bool default y diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 505a0859242..14f03cea94a 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -48,9 +48,6 @@ config GENERIC_IRQ_PROBE config GENERIC_CALIBRATE_DELAY def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_TIME_VSYSCALL def_bool n diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index cdaae942623..01c44cbdf16 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -733,10 +733,6 @@ config GENERIC_CLOCKEVENTS bool default y -config GENERIC_TIME - bool - default y - config GENERIC_CMOS_UPDATE bool default y diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 1c4565a9102..444b9f918fd 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -46,9 +46,6 @@ config GENERIC_FIND_NEXT_BIT config GENERIC_HWEIGHT def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_BUG def_bool y diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 05a366a5c4d..907417d187e 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -66,10 +66,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_TIME - bool - default y - config TIME_LOW_RES bool depends on SMP diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2031a284686..25e6bf45745 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -29,9 +29,6 @@ config MMU config GENERIC_CMOS_UPDATE def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_TIME_VSYSCALL def_bool y diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index bee1c0f794c..f0777a47e3a 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -40,9 +40,6 @@ config ARCH_HAS_ILOG2_U64 config GENERIC_HWEIGHT def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_TIME_VSYSCALL def_bool y diff --git a/arch/score/Kconfig b/arch/score/Kconfig index 55d413e6dcf..be4a1558475 100644 --- a/arch/score/Kconfig +++ b/arch/score/Kconfig @@ -55,9 +55,6 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_CLOCKEVENTS def_bool y -config GENERIC_TIME - def_bool y - config SCHED_NO_NO_OMIT_FRAME_POINTER def_bool y diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 82868fee21f..33990fa95af 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -98,9 +98,6 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_IOMAP bool -config GENERIC_TIME - def_bool y - config GENERIC_CLOCKEVENTS def_bool y diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index c0015db247b..1cd0d9d3c76 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -66,9 +66,6 @@ config BITS default 32 if SPARC32 default 64 if SPARC64 -config GENERIC_TIME - def_bool y - config ARCH_USES_GETTIMEOFFSET bool default y if SPARC32 diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common index 0d207e73a75..7c8e277f6d3 100644 --- a/arch/um/Kconfig.common +++ b/arch/um/Kconfig.common @@ -55,10 +55,6 @@ config GENERIC_BUG default y depends on BUG -config GENERIC_TIME - bool - default y - config GENERIC_CLOCKEVENTS bool default y diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index dcb0593b4a6..546b610ad71 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -72,9 +72,6 @@ config ARCH_DEFCONFIG default "arch/x86/configs/i386_defconfig" if X86_32 default "arch/x86/configs/x86_64_defconfig" if X86_64 -config GENERIC_TIME - def_bool y - config GENERIC_CMOS_UPDATE def_bool y @@ -2046,7 +2043,7 @@ config SCx200 config SCx200HR_TIMER tristate "NatSemi SCx200 27MHz High-Resolution Timer Support" - depends on SCx200 && GENERIC_TIME + depends on SCx200 default y ---help--- This driver provides a clocksource built upon the on-chip diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index ebe228d02b0..0859bfd8ae9 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -48,9 +48,6 @@ config HZ int default 100 -config GENERIC_TIME - def_bool y - source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/drivers/Makefile b/drivers/Makefile index 91874e04855..ae473445ad6 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -101,7 +101,9 @@ obj-y += firmware/ obj-$(CONFIG_CRYPTO) += crypto/ obj-$(CONFIG_SUPERH) += sh/ obj-$(CONFIG_ARCH_SHMOBILE) += sh/ -obj-$(CONFIG_GENERIC_TIME) += clocksource/ +ifndef CONFIG_ARCH_USES_GETTIMEOFFSET +obj-y += clocksource/ +endif obj-$(CONFIG_DMA_ENGINE) += dma/ obj-$(CONFIG_DCA) += dca/ obj-$(CONFIG_HID) += hid/ diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index 446aced33af..b76848c80be 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -77,7 +77,7 @@ static void power_saving_mwait_init(void) power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) | (highest_subcstate - 1); -#if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86) +#if defined(CONFIG_X86) switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: case X86_VENDOR_INTEL: diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index e9a8026d39f..294e10b5480 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -264,7 +264,7 @@ int acpi_processor_resume(struct acpi_device * device) return 0; } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) +#if defined(CONFIG_X86) static void tsc_check_state(int state) { switch (boot_cpu_data.x86_vendor) { diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 26386a92f5a..5b9ba4834ce 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -72,7 +72,7 @@ config ATMEL_TCLIB config ATMEL_TCB_CLKSRC bool "TC Block Clocksource" - depends on ATMEL_TCLIB && GENERIC_TIME + depends on ATMEL_TCLIB default y help Select this to get a high precision clocksource based on a @@ -240,7 +240,7 @@ config CS5535_MFGPT_DEFAULT_IRQ config CS5535_CLOCK_EVENT_SRC tristate "CS5535/CS5536 high-res timer (MFGPT) events" - depends on GENERIC_TIME && GENERIC_CLOCKEVENTS && CS5535_MFGPT + depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT help This driver provides a clock event source based on the MFGPT timer(s) in the CS5535 and CS5536 companion chips. diff --git a/kernel/time.c b/kernel/time.c index 848b1c2ab09..ba9b338d183 100644 --- a/kernel/time.c +++ b/kernel/time.c @@ -300,22 +300,6 @@ struct timespec timespec_trunc(struct timespec t, unsigned gran) } EXPORT_SYMBOL(timespec_trunc); -#ifndef CONFIG_GENERIC_TIME -/* - * Simulate gettimeofday using do_gettimeofday which only allows a timeval - * and therefore only yields usec accuracy - */ -void getnstimeofday(struct timespec *tv) -{ - struct timeval x; - - do_gettimeofday(&x); - tv->tv_sec = x.tv_sec; - tv->tv_nsec = x.tv_usec * NSEC_PER_USEC; -} -EXPORT_SYMBOL_GPL(getnstimeofday); -#endif - /* Converts Gregorian date to seconds since 1970-01-01 00:00:00. * Assumes input in normal date format, i.e. 1980-12-31 23:59:59 * => year=1980, mon=12, day=31, hour=23, min=59, sec=59. diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig index 95ed42951e0..f06a8a36564 100644 --- a/kernel/time/Kconfig +++ b/kernel/time/Kconfig @@ -6,7 +6,7 @@ config TICK_ONESHOT config NO_HZ bool "Tickless System (Dynamic Ticks)" - depends on GENERIC_TIME && GENERIC_CLOCKEVENTS + depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS select TICK_ONESHOT help This option enables a tickless system: timer interrupts will @@ -15,7 +15,7 @@ config NO_HZ config HIGH_RES_TIMERS bool "High Resolution Timer Support" - depends on GENERIC_TIME && GENERIC_CLOCKEVENTS + depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS select TICK_ONESHOT help This option enables high resolution timer support. If your diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index f08e99c1d56..c543d21b4e5 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -531,7 +531,7 @@ static u64 clocksource_max_deferment(struct clocksource *cs) return max_nsecs - (max_nsecs >> 5); } -#ifdef CONFIG_GENERIC_TIME +#ifndef CONFIG_ARCH_USES_GETTIMEOFFSET /** * clocksource_select - Select the best clocksource available @@ -577,7 +577,7 @@ static void clocksource_select(void) } } -#else /* CONFIG_GENERIC_TIME */ +#else /* !CONFIG_ARCH_USES_GETTIMEOFFSET */ static inline void clocksource_select(void) { } diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 623fe3d504d..73edd4074b5 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -173,8 +173,6 @@ void timekeeping_leap_insert(int leapsecond) update_vsyscall(&xtime, timekeeper.clock, timekeeper.mult); } -#ifdef CONFIG_GENERIC_TIME - /** * timekeeping_forward_now - update clock to the current time * @@ -376,52 +374,6 @@ void timekeeping_notify(struct clocksource *clock) tick_clock_notify(); } -#else /* GENERIC_TIME */ - -static inline void timekeeping_forward_now(void) { } - -/** - * ktime_get - get the monotonic time in ktime_t format - * - * returns the time in ktime_t format - */ -ktime_t ktime_get(void) -{ - struct timespec now; - - ktime_get_ts(&now); - - return timespec_to_ktime(now); -} -EXPORT_SYMBOL_GPL(ktime_get); - -/** - * ktime_get_ts - get the monotonic clock in timespec format - * @ts: pointer to timespec variable - * - * The function calculates the monotonic clock from the realtime - * clock and the wall_to_monotonic offset and stores the result - * in normalized timespec format in the variable pointed to by @ts. - */ -void ktime_get_ts(struct timespec *ts) -{ - struct timespec tomono; - unsigned long seq; - - do { - seq = read_seqbegin(&xtime_lock); - getnstimeofday(ts); - tomono = wall_to_monotonic; - - } while (read_seqretry(&xtime_lock, seq)); - - set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec, - ts->tv_nsec + tomono.tv_nsec); -} -EXPORT_SYMBOL_GPL(ktime_get_ts); - -#endif /* !GENERIC_TIME */ - /** * ktime_get_real - get the real (wall-) time in ktime_t format * @@ -784,10 +736,11 @@ void update_wall_time(void) return; clock = timekeeper.clock; -#ifdef CONFIG_GENERIC_TIME - offset = (clock->read(clock) - clock->cycle_last) & clock->mask; -#else + +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET offset = timekeeper.cycle_interval; +#else + offset = (clock->read(clock) - clock->cycle_last) & clock->mask; #endif timekeeper.xtime_nsec = (s64)xtime.tv_nsec << timekeeper.shift; diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 8b1797c4545..7531ddaf3af 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -153,7 +153,7 @@ config IRQSOFF_TRACER bool "Interrupts-off Latency Tracer" default n depends on TRACE_IRQFLAGS_SUPPORT - depends on GENERIC_TIME + depends on !ARCH_USES_GETTIMEOFFSET select TRACE_IRQFLAGS select GENERIC_TRACER select TRACER_MAX_TRACE @@ -175,7 +175,7 @@ config IRQSOFF_TRACER config PREEMPT_TRACER bool "Preemption-off Latency Tracer" default n - depends on GENERIC_TIME + depends on !ARCH_USES_GETTIMEOFFSET depends on PREEMPT select GENERIC_TRACER select TRACER_MAX_TRACE -- cgit v1.2.3-70-g09d2 From 7bd1c365fd124624191d49dcc1eb9759d6017ec3 Mon Sep 17 00:00:00 2001 From: Mike Habeck Date: Wed, 12 May 2010 11:14:32 -0700 Subject: x86/PCI: Add option to not assign BAR's if not already assigned The Linux kernel assigns BARs that a BIOS did not assign, most likely to handle broken BIOSes that didn't enumerate the devices correctly. On UV the BIOS purposely doesn't assign I/O BARs for certain devices/ drivers we know don't use them (examples, LSI SAS, Qlogic FC, ...). We purposely don't assign these I/O BARs because I/O Space is a very limited resource. There is only 64k of I/O Space, and in a PCIe topology that space gets divided up into 4k chucks (this is due to the fact that a pci-to-pci bridge's I/O decoder is aligned at 4k)... Thus a system can have at most 16 cards with I/O BARs: (64k / 4k = 16) SGI needs to scale to >16 devices with I/O BARs. So by not assigning I/O BARs on devices we know don't use them, we can do that (iff the kernel doesn't go and assign these BARs that the BIOS purposely didn't assign). This patch will not assign a resource to a device BAR if that BAR was not assigned by the BIOS, and the kernel cmdline option 'pci=nobar' was specified. This patch is closely modeled after the 'pci=norom' option that currently exists in the tree. Signed-off-by: Mike Habeck Signed-off-by: Mike Travis Signed-off-by: Jesse Barnes --- Documentation/kernel-parameters.txt | 2 ++ arch/x86/include/asm/pci_x86.h | 1 + arch/x86/pci/common.c | 20 ++++++++++++++++++++ 3 files changed, 23 insertions(+) (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2b2407d9a6d..4fac69beeb4 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1970,6 +1970,8 @@ and is between 256 and 4096 characters. It is defined in the file norom [X86] Do not assign address space to expansion ROMs that do not already have BIOS assigned address ranges. + nobar [X86] Do not assign address space to the + BARs that weren't assigned by the BIOS. irqmask=0xMMMM [X86] Set a bit mask of IRQs allowed to be assigned automatically to PCI devices. You can make the kernel exclude IRQs of your ISA cards diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index cd2a31dc5fb..49c7219826f 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -30,6 +30,7 @@ #define PCI_HAS_IO_ECS 0x40000 #define PCI_NOASSIGN_ROMS 0x80000 #define PCI_ROOT_NO_CRS 0x100000 +#define PCI_NOASSIGN_BARS 0x200000 extern unsigned int pci_probe; extern unsigned long pirq_table_addr; diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 215a27ae050..a0772af64ef 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -125,6 +125,23 @@ void __init dmi_check_skip_isa_align(void) static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) { struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE]; + struct resource *bar_r; + int bar; + + if (pci_probe & PCI_NOASSIGN_BARS) { + /* + * If the BIOS did not assign the BAR, zero out the + * resource so the kernel doesn't attmept to assign + * it later on in pci_assign_unassigned_resources + */ + for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) { + bar_r = &dev->resource[bar]; + if (bar_r->start == 0 && bar_r->end != 0) { + bar_r->flags = 0; + bar_r->end = 0; + } + } + } if (pci_probe & PCI_NOASSIGN_ROMS) { if (rom_r->parent) @@ -509,6 +526,9 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "norom")) { pci_probe |= PCI_NOASSIGN_ROMS; return NULL; + } else if (!strcmp(str, "nobar")) { + pci_probe |= PCI_NOASSIGN_BARS; + return NULL; } else if (!strcmp(str, "assign-busses")) { pci_probe |= PCI_ASSIGN_ALL_BUSSES; return NULL; -- cgit v1.2.3-70-g09d2 From c1c124e91e7c6d5a600c98f6fb5b443c403a14f4 Mon Sep 17 00:00:00 2001 From: John Johansen Date: Thu, 29 Jul 2010 14:48:09 -0700 Subject: AppArmor: update Maintainer and Documentation Signed-off-by: John Johansen Signed-off-by: James Morris --- Documentation/apparmor.txt | 39 +++++++++++++++++++++++++++++++++++++ Documentation/kernel-parameters.txt | 8 ++++++++ MAINTAINERS | 8 ++++++++ 3 files changed, 55 insertions(+) create mode 100644 Documentation/apparmor.txt (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/apparmor.txt b/Documentation/apparmor.txt new file mode 100644 index 00000000000..93c1fd7d063 --- /dev/null +++ b/Documentation/apparmor.txt @@ -0,0 +1,39 @@ +--- What is AppArmor? --- + +AppArmor is MAC style security extension for the Linux kernel. It implements +a task centered policy, with task "profiles" being created and loaded +from user space. Tasks on the system that do not have a profile defined for +them run in an unconfined state which is equivalent to standard Linux DAC +permissions. + +--- How to enable/disable --- + +set CONFIG_SECURITY_APPARMOR=y + +If AppArmor should be selected as the default security module then + set CONFIG_DEFAULT_SECURITY="apparmor" + and CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 + +Build the kernel + +If AppArmor is not the default security module it can be enabled by passing +security=apparmor on the kernel's command line. + +If AppArmor is the default security module it can be disabled by passing +apparmor=0, security=XXXX (where XXX is valid security module), on the +kernel's command line + +For AppArmor to enforce any restrictions beyond standard Linux DAC permissions +policy must be loaded into the kernel from user space (see the Documentation +and tools links). + +--- Documentation --- + +Documentation can be found on the wiki. + +--- Links --- + +Mailing List - apparmor@lists.ubuntu.com +Wiki - http://apparmor.wiki.kernel.org/ +User space tools - https://launchpad.net/apparmor +Kernel module - git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2b2407d9a6d..b61f89fa01c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -93,6 +93,7 @@ parameter is applicable: Documentation/scsi/. SECURITY Different security models are enabled. SELINUX SELinux support is enabled. + APPARMOR AppArmor support is enabled. SERIAL Serial support is enabled. SH SuperH architecture is enabled. SMP The kernel is an SMP kernel. @@ -2312,6 +2313,13 @@ and is between 256 and 4096 characters. It is defined in the file If enabled at boot time, /selinux/disable can be used later to disable prior to initial policy load. + apparmor= [APPARMOR] Disable or enable AppArmor at boot time + Format: { "0" | "1" } + See security/apparmor/Kconfig help text + 0 -- disable. + 1 -- enable. + Default value is set via kernel config option. + serialnumber [BUGS=X86-32] shapers= [NET] diff --git a/MAINTAINERS b/MAINTAINERS index 28443185646..33606bb91f1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5061,6 +5061,14 @@ S: Supported F: include/linux/selinux* F: security/selinux/ +APPARMOR SECURITY MODULE +M: John Johansen +L: apparmor@lists.ubuntu.com (subscribers-only, general discussion) +W: apparmor.wiki.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git +S: Supported +F: security/apparmor/ + SENSABLE PHANTOM M: Jiri Slaby S: Maintained -- cgit v1.2.3-70-g09d2 From 65b5ac1479840a3e87f086d68e5ef91f3002e8e2 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 5 Aug 2010 09:22:33 -0500 Subject: kgdb,docs: Update the kgdb docs to include kms Update the kgdb docs to include information about kernel mode setting support. [Randy Dunlap : grammatical corrections] CC: Randy Dunlap Signed-off-by: Jason Wessel --- Documentation/DocBook/kgdb.tmpl | 108 +++++++++++++++++++++++++++++++++--- Documentation/kernel-parameters.txt | 9 ++- 2 files changed, 106 insertions(+), 11 deletions(-) (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index 55f12ac37ac..490d862c5f0 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -199,10 +199,33 @@ may be configured as a kernel built-in or a kernel loadable module. You can only make use of kgdbwait and early debugging if you build kgdboc into the kernel as a built-in. + Optionally you can elect to activate kms (Kernel Mode + Setting) integration. When you use kms with kgdboc and you have a + video driver that has atomic mode setting hooks, it is possible to + enter the debugger on the graphics console. When the kernel + execution is resumed, the previous graphics mode will be restored. + This integration can serve as a useful tool to aid in diagnosing + crashes or doing analysis of memory with kdb while allowing the + full graphics console applications to run. + kgdboc arguments - Usage: kgdboc=[kbd][[,]serial_device][,baud] + Usage: kgdboc=[kms][[,]kbd][[,]serial_device][,baud] + The order listed above must be observed if you use any of the + optional configurations together. + + Abbreviations: + + kms = Kernel Mode Setting + kbd = Keyboard + + + You can configure kgdboc to use the keyboard, and or a serial + device depending on if you are using kdb and or kgdb, in one of the + following scenarios. The order listed above must be observed if + you use any of the optional configurations together. Using kms + + only gdb is generally not a useful combination. Using loadable module or built-in @@ -212,7 +235,7 @@ As a kernel loadable module: Use the command: modprobe kgdboc kgdboc=<tty-device>,[baud] - Here are two examples of how you might formate the kgdboc + Here are two examples of how you might format the kgdboc string. The first is for an x86 target using the first serial port. The second example is for the ARM Versatile AB using the second serial port. @@ -240,6 +263,9 @@ More examples + You can configure kgdboc to use the keyboard, and or a serial + device depending on if you are using kdb and or kgdb, in one of the + following scenarios. You can configure kgdboc to use the keyboard, and or a serial device depending on if you are using kdb and or kgdb, in one of the following scenarios. @@ -255,6 +281,12 @@ kdb with a keyboard kgdboc=kbd + kdb with kernel mode setting + kgdboc=kms,kbd + + kdb with kernel mode setting and kgdb over a serial port + kgdboc=kms,kbd,ttyS0,115200 + @@ -637,6 +669,8 @@ Task Addr Pid Parent [*] cpu State Thread Command The logic to perform safe memory reads and writes to memory while using the debugger A full implementation for software breakpoints unless overridden by the arch The API to invoke either the kdb or kgdb frontend to the debug core. + The structures and callback API for atomic kernel mode setting. + NOTE: kgdboc is where the kms callbacks are invoked. @@ -747,6 +781,8 @@ Task Addr Pid Parent [*] cpu State Thread Command kgdboc internals + + kgdboc and uarts The kgdboc driver is actually a very thin driver that relies on the underlying low level to the hardware driver having "polling hooks" @@ -754,11 +790,8 @@ Task Addr Pid Parent [*] cpu State Thread Command implementation of kgdboc it the serial_core was changed to expose a low level UART hook for doing polled mode reading and writing of a single character while in an atomic context. When kgdb makes an I/O - request to the debugger, kgdboc invokes a call back in the serial - core which in turn uses the call back in the UART driver. It is - certainly possible to extend kgdboc to work with non-UART based - consoles in the future. - + request to the debugger, kgdboc invokes a callback in the serial + core which in turn uses the callback in the UART driver. When using kgdboc with a UART, the UART driver must implement two callbacks in the struct uart_ops. Example from drivers/8250.c: #ifdef CONFIG_CONSOLE_POLL @@ -772,9 +805,68 @@ Task Addr Pid Parent [*] cpu State Thread Command that they can be called from an atomic context and have to restore the state of the UART chip on return such that the system can return to normal when the debugger detaches. You need to be very careful - with any kind of lock you consider, because failing here is most + with any kind of lock you consider, because failing here is most likely going to mean pressing the reset button. + + + kgdboc and keyboards + The kgdboc driver contains logic to configure communications + with an attached keyboard. The keyboard infrastructure is only + compiled into the kernel when CONFIG_KDB_KEYBOARD=y is set in the + kernel configuration. + The core polled keyboard driver driver for PS/2 type keyboards + is in drivers/char/kdb_keyboard.c. This driver is hooked into the + debug core when kgdboc populates the callback in the array + called kdb_poll_funcs[]. The + kdb_get_kbd_char() is the top-level function which polls hardware + for single character input. + + + + kgdboc and kms + The kgdboc driver contains logic to request the graphics + display to switch to a text context when you are using + "kgdboc=kms,kbd", provided that you have a video driver which has a + frame buffer console and atomic kernel mode setting support. + + Every time the kernel + debugger is entered it calls kgdboc_pre_exp_handler() which in turn + calls con_debug_enter() in the virtual console layer. On resuming kernel + execution, the kernel debugger calls kgdboc_post_exp_handler() which + in turn calls con_debug_leave(). + Any video driver that wants to be compatible with the kernel + debugger and the atomic kms callbacks must implement the + mode_set_base_atomic, fb_debug_enter and fb_debug_leave operations. + For the fb_debug_enter and fb_debug_leave the option exists to use + the generic drm fb helper functions or implement something custom for + the hardware. The following example shows the initialization of the + .mode_set_base_atomic operation in + drivers/gpu/drm/i915/intel_display.c: + + +static const struct drm_crtc_helper_funcs intel_helper_funcs = { +[...] + .mode_set_base_atomic = intel_pipe_set_base_atomic, +[...] +}; + + + + Here is an example of how the i915 driver initializes the fb_debug_enter and fb_debug_leave functions to use the generic drm helpers in + drivers/gpu/drm/i915/intel_fb.c: + + +static struct fb_ops intelfb_ops = { +[...] + .fb_debug_enter = drm_fb_helper_debug_enter, + .fb_debug_leave = drm_fb_helper_debug_leave, +[...] +}; + + + + diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2b2407d9a6d..0e4f39ff53b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1143,9 +1143,12 @@ and is between 256 and 4096 characters. It is defined in the file kgdboc= [KGDB,HW] kgdb over consoles. Requires a tty driver that supports console polling, or a supported polling keyboard driver (non-usb). - Serial only format: [,baud] - keyboard only format: kbd - keyboard and serial format: kbd,[,baud] + Serial only format: [,baud] + keyboard only format: kbd + keyboard and serial format: kbd,[,baud] + Optional Kernel mode setting: + kms, kbd format: kms,kbd + kms, kbd and serial format: kms,kbd,[,baud] kgdbwait [KGDB] Stop kernel execution and enter the kernel debugger at the earliest opportunity. -- cgit v1.2.3-70-g09d2 From 1917ac76e023339c73844bec775375b147f57ac7 Mon Sep 17 00:00:00 2001 From: Samium Gromoff <_deepfire@feelingofgreen.ru> Date: Tue, 20 Jul 2010 15:26:51 -0700 Subject: serial: MMIO32 support for 8250_early.c Provide MMIO32 support in 8250_early (aka earlycon) [randy.dunlap@oracle.com: fix printk format warnings] [akpm@linux-foundation.org: fix printk args some more] Signed-off-by: Samium Gromoff <_deepfire@feelingofgreen.ru> Signed-off-by: Randy Dunlap Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 3 ++ drivers/serial/8250_early.c | 57 +++++++++++++++++++++++++++---------- 2 files changed, 45 insertions(+), 15 deletions(-) (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 44f6b19c50b..d529b1363e9 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -681,8 +681,11 @@ and is between 256 and 4096 characters. It is defined in the file earlycon= [KNL] Output early console device and options. uart[8250],io,[,options] uart[8250],mmio,[,options] + uart[8250],mmio32,[,options] Start an early, polled-mode console on the 8250/16550 UART at the specified I/O port or MMIO address. + MMIO inter-register address stride is either 8bit (mmio) + or 32bit (mmio32). The options are the same as for ttyS, above. earlyprintk= [X86,SH,BLACKFIN] diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c index f279745e9fe..b745792ec25 100644 --- a/drivers/serial/8250_early.c +++ b/drivers/serial/8250_early.c @@ -19,9 +19,11 @@ * The user can specify the device directly, e.g., * earlycon=uart8250,io,0x3f8,9600n8 * earlycon=uart8250,mmio,0xff5e0000,115200n8 + * earlycon=uart8250,mmio32,0xff5e0000,115200n8 * or * console=uart8250,io,0x3f8,9600n8 * console=uart8250,mmio,0xff5e0000,115200n8 + * console=uart8250,mmio32,0xff5e0000,115200n8 */ #include @@ -48,18 +50,31 @@ static struct early_serial8250_device early_device; static unsigned int __init serial_in(struct uart_port *port, int offset) { - if (port->iotype == UPIO_MEM) + switch (port->iotype) { + case UPIO_MEM: return readb(port->membase + offset); - else + case UPIO_MEM32: + return readl(port->membase + (offset << 2)); + case UPIO_PORT: return inb(port->iobase + offset); + default: + return 0; + } } static void __init serial_out(struct uart_port *port, int offset, int value) { - if (port->iotype == UPIO_MEM) + switch (port->iotype) { + case UPIO_MEM: writeb(value, port->membase + offset); - else + break; + case UPIO_MEM32: + writel(value, port->membase + (offset << 2)); + break; + case UPIO_PORT: outb(value, port->iobase + offset); + break; + } } #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) @@ -137,15 +152,21 @@ static int __init parse_options(struct early_serial8250_device *device, char *options) { struct uart_port *port = &device->port; - int mmio, length; + int mmio, mmio32, length; if (!options) return -ENODEV; port->uartclk = BASE_BAUD * 16; - if (!strncmp(options, "mmio,", 5)) { - port->iotype = UPIO_MEM; - port->mapbase = simple_strtoul(options + 5, &options, 0); + + mmio = !strncmp(options, "mmio,", 5); + mmio32 = !strncmp(options, "mmio32,", 7); + if (mmio || mmio32) { + port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); + port->mapbase = simple_strtoul(options + (mmio ? 5 : 7), + &options, 0); + if (mmio32) + port->regshift = 2; #ifdef CONFIG_FIX_EARLYCON_MEM set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, port->mapbase & PAGE_MASK); @@ -157,11 +178,10 @@ static int __init parse_options(struct early_serial8250_device *device, if (!port->membase) { printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", __func__, - (unsigned long long)port->mapbase); + (unsigned long long) port->mapbase); return -ENOMEM; } #endif - mmio = 1; } else if (!strncmp(options, "io,", 3)) { port->iotype = UPIO_PORT; port->iobase = simple_strtoul(options + 3, &options, 0); @@ -181,11 +201,18 @@ static int __init parse_options(struct early_serial8250_device *device, device->baud); } - printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n", - mmio ? "MMIO" : "I/O port", - mmio ? (unsigned long long) port->mapbase - : (unsigned long long) port->iobase, - device->options); + if (mmio || mmio32) + printk(KERN_INFO + "Early serial console at MMIO%s 0x%llu (options '%s')\n", + mmio32 ? "32" : "", + (unsigned long long)port->mapbase, + device->options); + else + printk(KERN_INFO + "Early serial console at I/O port 0x%lu (options '%s')\n", + port->iobase, + device->options); + return 0; } -- cgit v1.2.3-70-g09d2 From c7ff0d9c92435e836e13aaa8d0e56d4000424bcc Mon Sep 17 00:00:00 2001 From: TAMUKI Shoichi Date: Tue, 10 Aug 2010 18:03:28 -0700 Subject: panic: keep blinking in spite of long spin timer mode To keep panic_timeout accuracy when running under a hypervisor, the current implementation only spins on long time (1 second) calls to mdelay. That brings a good effect, but the problem is the keyboard LEDs don't blink at all on that situation. This patch changes to call to panic_blink_enter() between every mdelay and keeps blinking in spite of long spin timer mode. The time to call to mdelay is now 100ms. Even this change will keep panic_timeout accuracy enough when running under a hypervisor. Signed-off-by: TAMUKI Shoichi Cc: Ben Dooks Cc: Russell King Acked-by: Dmitry Torokhov Cc: Anton Blanchard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kernel-parameters.txt | 3 -- arch/arm/mach-s3c2440/mach-gta02.c | 17 ++++------- drivers/input/serio/i8042.c | 25 ++++------------ include/linux/kernel.h | 2 +- kernel/panic.c | 58 +++++++++++++++++-------------------- 5 files changed, 37 insertions(+), 68 deletions(-) (limited to 'Documentation/kernel-parameters.txt') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d529b1363e9..873b6809009 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -915,9 +915,6 @@ and is between 256 and 4096 characters. It is defined in the file controller i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX controllers - i8042.panicblink= - [HW] Frequency with which keyboard LEDs should blink - when kernel panics (default is 0.5 sec) i8042.reset [HW] Reset the controller during init and cleanup i8042.unlock [HW] Unlock (ignore) the keylock diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 9e39faa283b..deaabe86741 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -90,24 +90,17 @@ static struct pcf50633 *gta02_pcf; /* - * This gets called every 1ms when we paniced. + * This gets called frequently when we paniced. */ -static long gta02_panic_blink(long count) +static long gta02_panic_blink(int state) { long delay = 0; - static long last_blink; - static char led; + char led; - /* Fast blink: 200ms period. */ - if (count - last_blink < 100) - return 0; - - led ^= 1; + led = (state) ? 1 : 0; gpio_direction_output(GTA02_GPIO_AUX_LED, led); - last_blink = count; - return delay; } @@ -556,7 +549,7 @@ static void gta02_poweroff(void) static void __init gta02_machine_init(void) { - /* Set the panic callback to make AUX LED blink at ~5Hz. */ + /* Set the panic callback to turn AUX LED on or off. */ panic_blink = gta02_panic_blink; s3c_pm_init(); diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 258b98b9d7c..46e4ba0b924 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -61,10 +61,6 @@ static bool i8042_noloop; module_param_named(noloop, i8042_noloop, bool, 0); MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port"); -static unsigned int i8042_blink_frequency = 500; -module_param_named(panicblink, i8042_blink_frequency, uint, 0600); -MODULE_PARM_DESC(panicblink, "Frequency with which keyboard LEDs should blink when kernel panics"); - #ifdef CONFIG_X86 static bool i8042_dritek; module_param_named(dritek, i8042_dritek, bool, 0); @@ -1030,8 +1026,8 @@ static void i8042_controller_reset(void) /* - * i8042_panic_blink() will flash the keyboard LEDs and is called when - * kernel panics. Flashing LEDs is useful for users running X who may + * i8042_panic_blink() will turn the keyboard LEDs on or off and is called + * when kernel panics. Flashing LEDs is useful for users running X who may * not see the console and will help distingushing panics from "real" * lockups. * @@ -1041,22 +1037,12 @@ static void i8042_controller_reset(void) #define DELAY do { mdelay(1); if (++delay > 10) return delay; } while(0) -static long i8042_panic_blink(long count) +static long i8042_panic_blink(int state) { long delay = 0; - static long last_blink; - static char led; - - /* - * We expect frequency to be about 1/2s. KDB uses about 1s. - * Make sure they are different. - */ - if (!i8042_blink_frequency) - return 0; - if (count - last_blink < i8042_blink_frequency) - return 0; + char led; - led ^= 0x01 | 0x04; + led = (state) ? 0x01 | 0x04 : 0; while (i8042_read_status() & I8042_STR_IBF) DELAY; dbg("%02x -> i8042 (panic blink)", 0xed); @@ -1069,7 +1055,6 @@ static long i8042_panic_blink(long count) dbg("%02x -> i8042 (panic blink)", led); i8042_write_data(led); DELAY; - last_blink = count; return delay; } diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 5b57236dfbd..452833d67b2 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -177,7 +177,7 @@ struct va_format { }; extern struct atomic_notifier_head panic_notifier_list; -extern long (*panic_blink)(long time); +extern long (*panic_blink)(int state); NORET_TYPE void panic(const char * fmt, ...) __attribute__ ((NORET_AND format (printf, 1, 2))) __cold; extern void oops_enter(void); diff --git a/kernel/panic.c b/kernel/panic.c index 3b16cd93fa7..3e9037ae10e 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -24,6 +24,9 @@ #include #include +#define PANIC_TIMER_STEP 100 +#define PANIC_BLINK_SPD 18 + int panic_on_oops; static unsigned long tainted_mask; static int pause_on_oops; @@ -36,36 +39,15 @@ ATOMIC_NOTIFIER_HEAD(panic_notifier_list); EXPORT_SYMBOL(panic_notifier_list); -/* Returns how long it waited in ms */ -long (*panic_blink)(long time); -EXPORT_SYMBOL(panic_blink); - -static void panic_blink_one_second(void) +static long no_blink(int state) { - static long i = 0, end; - - if (panic_blink) { - end = i + MSEC_PER_SEC; - - while (i < end) { - i += panic_blink(i); - mdelay(1); - i++; - } - } else { - /* - * When running under a hypervisor a small mdelay may get - * rounded up to the hypervisor timeslice. For example, with - * a 1ms in 10ms hypervisor timeslice we might inflate a - * mdelay(1) loop by 10x. - * - * If we have nothing to blink, spin on 1 second calls to - * mdelay to avoid this. - */ - mdelay(MSEC_PER_SEC); - } + return 0; } +/* Returns how long it waited in ms */ +long (*panic_blink)(int state); +EXPORT_SYMBOL(panic_blink); + /** * panic - halt the system * @fmt: The text string to print @@ -78,7 +60,8 @@ NORET_TYPE void panic(const char * fmt, ...) { static char buf[1024]; va_list args; - long i; + long i, i_next = 0; + int state = 0; /* * It's possible to come here directly from a panic-assertion and @@ -117,6 +100,9 @@ NORET_TYPE void panic(const char * fmt, ...) bust_spinlocks(0); + if (!panic_blink) + panic_blink = no_blink; + if (panic_timeout > 0) { /* * Delay timeout seconds before rebooting the machine. @@ -124,9 +110,13 @@ NORET_TYPE void panic(const char * fmt, ...) */ printk(KERN_EMERG "Rebooting in %d seconds..", panic_timeout); - for (i = 0; i < panic_timeout; i++) { + for (i = 0; i < panic_timeout * 1000; i += PANIC_TIMER_STEP) { touch_nmi_watchdog(); - panic_blink_one_second(); + if (i >= i_next) { + i += panic_blink(state ^= 1); + i_next = i + 3600 / PANIC_BLINK_SPD; + } + mdelay(PANIC_TIMER_STEP); } /* * This will not be a clean reboot, with everything @@ -152,9 +142,13 @@ NORET_TYPE void panic(const char * fmt, ...) } #endif local_irq_enable(); - while (1) { + for (i = 0; ; i += PANIC_TIMER_STEP) { touch_softlockup_watchdog(); - panic_blink_one_second(); + if (i >= i_next) { + i += panic_blink(state ^= 1); + i_next = i + 3600 / PANIC_BLINK_SPD; + } + mdelay(PANIC_TIMER_STEP); } } -- cgit v1.2.3-70-g09d2