From a027b33348df3512d7680eed29bada1247f01ad7 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 23 Jul 2010 04:00:38 +0000 Subject: powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindings Update compatible and interrupt properties description. Furthermore an example for the MPC5121 has been added. Signed-off-by: Anatolij Gustschin Acked-by: Timur Tabi Signed-off-by: Grant Likely --- Documentation/powerpc/dts-bindings/fsl/diu.txt | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt index deb35de7098..326cddfd7c2 100644 --- a/Documentation/powerpc/dts-bindings/fsl/diu.txt +++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt @@ -4,10 +4,12 @@ The Freescale DIU is a LCD controller, with proper hardware, it can also drive DVI monitors. Required properties: -- compatible : should be "fsl-diu". +- compatible : should be "fsl,diu" or "fsl,mpc5121-diu". - reg : should contain at least address and length of the DIU register set. -- Interrupts : one DIU interrupt should be describe here. +- interrupts : one DIU interrupt should be described here. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. Example (MPC8610HPCD): display@2c000 { @@ -16,3 +18,11 @@ Example (MPC8610HPCD): interrupts = <72 2>; interrupt-parent = <&mpic>; }; + +Example for MPC5121: + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + interrupt-parent = <&ipic>; + }; -- cgit v1.2.3-70-g09d2 From 8b856f040c09024aa9d1f363c1a5cf2d3db73ebd Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 23 Jul 2010 04:00:39 +0000 Subject: powerpc/fsl-diu-fb: Support setting display mode using EDID Adds support for encoding display mode information in the device tree using verbatim EDID block. If the EDID entry in the DIU node is present, the driver will build mode database using EDID data and allow setting the display modes from this database. Otherwise display mode will be set using mode entries from driver's internal database as usual. This patch also updates device tree bindings. Signed-off-by: Anatolij Gustschin Acked-by: Timur Tabi Signed-off-by: Grant Likely --- Documentation/powerpc/dts-bindings/fsl/diu.txt | 6 ++ drivers/video/Kconfig | 1 + drivers/video/fsl-diu-fb.c | 80 ++++++++++++++++++++++++-- 3 files changed, 81 insertions(+), 6 deletions(-) (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt index 326cddfd7c2..b66cb6d31d6 100644 --- a/Documentation/powerpc/dts-bindings/fsl/diu.txt +++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt @@ -11,6 +11,11 @@ Required properties: - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. +Optional properties: +- edid : verbatim EDID data block describing attached display. + Data from the detailed timing descriptor will be used to + program the display controller. + Example (MPC8610HPCD): display@2c000 { compatible = "fsl,diu"; @@ -25,4 +30,5 @@ Example for MPC5121: reg = <0x2100 0x100>; interrupts = <64 0x8>; interrupt-parent = <&ipic>; + edid = [edid-data]; }; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 3d94a147172..114aeb0d997 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1871,6 +1871,7 @@ config FB_MBX_DEBUG config FB_FSL_DIU tristate "Freescale DIU framebuffer support" depends on FB && FSL_SOC + select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index db3e360e6aa..e38ad222454 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -35,6 +35,7 @@ #include #include +#include "edid.h" /* * These parameters give default parameters @@ -217,6 +218,7 @@ struct mfb_info { int x_aoi_d; /* aoi display x offset to physical screen */ int y_aoi_d; /* aoi display y offset to physical screen */ struct fsl_diu_data *parent; + u8 *edid_data; }; @@ -1185,18 +1187,30 @@ static int __devinit install_fb(struct fb_info *info) int rc; struct mfb_info *mfbi = info->par; const char *aoi_mode, *init_aoi_mode = "320x240"; + struct fb_videomode *db = fsl_diu_mode_db; + unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db); + int has_default_mode = 1; if (init_fbinfo(info)) return -EINVAL; - if (mfbi->index == 0) /* plane 0 */ + if (mfbi->index == 0) { /* plane 0 */ + if (mfbi->edid_data) { + /* Now build modedb from EDID */ + fb_edid_to_monspecs(mfbi->edid_data, &info->monspecs); + fb_videomode_to_modelist(info->monspecs.modedb, + info->monspecs.modedb_len, + &info->modelist); + db = info->monspecs.modedb; + dbsize = info->monspecs.modedb_len; + } aoi_mode = fb_mode; - else + } else { aoi_mode = init_aoi_mode; + } pr_debug("mode used = %s\n", aoi_mode); - rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db, - ARRAY_SIZE(fsl_diu_mode_db), &fsl_diu_default_mode, default_bpp); - + rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, + &fsl_diu_default_mode, default_bpp); switch (rc) { case 1: pr_debug("using mode specified in @mode\n"); @@ -1214,10 +1228,50 @@ static int __devinit install_fb(struct fb_info *info) default: pr_debug("rc = %d\n", rc); pr_debug("failed to find mode\n"); - return -EINVAL; + /* + * For plane 0 we continue and look into + * driver's internal modedb. + */ + if (mfbi->index == 0 && mfbi->edid_data) + has_default_mode = 0; + else + return -EINVAL; break; } + if (!has_default_mode) { + rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db, + ARRAY_SIZE(fsl_diu_mode_db), + &fsl_diu_default_mode, + default_bpp); + if (rc > 0 && rc < 5) + has_default_mode = 1; + } + + /* Still not found, use preferred mode from database if any */ + if (!has_default_mode && info->monspecs.modedb) { + struct fb_monspecs *specs = &info->monspecs; + struct fb_videomode *modedb = &specs->modedb[0]; + + /* + * Get preferred timing. If not found, + * first mode in database will be used. + */ + if (specs->misc & FB_MISC_1ST_DETAIL) { + int i; + + for (i = 0; i < specs->modedb_len; i++) { + if (specs->modedb[i].flag & FB_MODE_IS_FIRST) { + modedb = &specs->modedb[i]; + break; + } + } + } + + info->var.bits_per_pixel = default_bpp; + fb_videomode_to_var(&info->var, modedb); + } + pr_debug("xres_virtual %d\n", info->var.xres_virtual); pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel); @@ -1256,6 +1310,9 @@ static void uninstall_fb(struct fb_info *info) if (!mfbi->registered) return; + if (mfbi->index == 0) + kfree(mfbi->edid_data); + unregister_framebuffer(info); unmap_video_memory(info); if (&info->cmap) @@ -1456,6 +1513,17 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev, mfbi = machine_data->fsl_diu_info[i]->par; memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info)); mfbi->parent = machine_data; + + if (mfbi->index == 0) { + const u8 *prop; + int len; + + /* Get EDID */ + prop = of_get_property(np, "edid", &len); + if (prop && len == EDID_LENGTH) + mfbi->edid_data = kmemdup(prop, EDID_LENGTH, + GFP_KERNEL); + } } ret = of_address_to_resource(np, 0, &res); -- cgit v1.2.3-70-g09d2 From 0c2daaafcdec726e89cbccca61d576de8429c537 Mon Sep 17 00:00:00 2001 From: Albrecht Dreß Date: Wed, 17 Feb 2010 08:59:14 +0000 Subject: powerpc/5200/i2c: improve i2c bus error recovery MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch improves the recovery of the MPC's I2C bus from errors like bus hangs resulting in timeouts: 1. make the bus timeout configurable, as it depends on the bus clock and the attached slave chip(s); default is still 1 second; 2. detect any of the cases indicated by the CF, BB and RXAK MSR flags if a timeout occurs, and add a missing (required) MAL reset; 3. use a more reliable method to fixup the bus if a hang has been detected. The sequence is sent 9 times which seems to be necessary if a slave "misses" more than one clock cycle. For 400 kHz bus speed, the fixup is also ~70us (81us vs. 150us) faster. Tested on a custom Lite5200b derived board, with a Dallas RTC, AD sensors and NXP IO expander chips attached to the i2c. Changes vs. v1: - use improved bus fixup sequence for all chips (not only the 5200) - calculate real clock from defaults if no clock is given in the device tree - better description (I hope) of the changes. I didn't split the changes in this file into three parts as recommended by Grant, as they actually belong together (i.e. they address one single problem, just in three places of one single source file). Signed-off-by: Albrecht Dreß [grant.likely@secretlab.ca: fixup for ->node to ->dev.of_node transition] Signed-off-by: Grant Likely --- Documentation/powerpc/dts-bindings/fsl/i2c.txt | 2 + drivers/i2c/busses/i2c-mpc.c | 69 ++++++++++++++++++-------- 2 files changed, 49 insertions(+), 22 deletions(-) (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt index 50da2031058..1eacd6b20ed 100644 --- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt +++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt @@ -20,6 +20,7 @@ Recommended properties : - fsl,preserve-clocking : boolean; if defined, the clock settings from the bootloader are preserved (not touched). - clock-frequency : desired I2C bus clock frequency in Hz. + - fsl,timeout : I2C bus timeout in microseconds. Examples : @@ -59,4 +60,5 @@ Examples : interrupts = <43 2>; interrupt-parent = <&mpic>; clock-frequency = <400000>; + fsl,timeout = <10000>; }; diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index df00eb1f11f..54247d475fc 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -63,6 +63,7 @@ struct mpc_i2c { wait_queue_head_t queue; struct i2c_adapter adap; int irq; + u32 real_clk; }; struct mpc_i2c_divider { @@ -96,20 +97,23 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) /* Sometimes 9th clock pulse isn't generated, and slave doesn't release * the bus, because it wants to send ACK. * Following sequence of enabling/disabling and sending start/stop generates - * the pulse, so it's all OK. + * the 9 pulses, so it's all OK. */ static void mpc_i2c_fixup(struct mpc_i2c *i2c) { - writeccr(i2c, 0); - udelay(30); - writeccr(i2c, CCR_MEN); - udelay(30); - writeccr(i2c, CCR_MSTA | CCR_MTX); - udelay(30); - writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN); - udelay(30); - writeccr(i2c, CCR_MEN); - udelay(30); + int k; + u32 delay_val = 1000000 / i2c->real_clk + 1; + + if (delay_val < 2) + delay_val = 2; + + for (k = 9; k; k--) { + writeccr(i2c, 0); + writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN); + udelay(delay_val); + writeccr(i2c, CCR_MEN); + udelay(delay_val << 1); + } } static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) @@ -190,15 +194,18 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = { }; static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, - int prescaler) + int prescaler, u32 *real_clk) { const struct mpc_i2c_divider *div = NULL; unsigned int pvr = mfspr(SPRN_PVR); u32 divider; int i; - if (clock == MPC_I2C_CLOCK_LEGACY) + if (clock == MPC_I2C_CLOCK_LEGACY) { + /* see below - default fdr = 0x3f -> div = 2048 */ + *real_clk = mpc5xxx_get_bus_frequency(node) / 2048; return -EINVAL; + } /* Determine divider value */ divider = mpc5xxx_get_bus_frequency(node) / clock; @@ -216,7 +223,8 @@ static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, break; } - return div ? (int)div->fdr : -EINVAL; + *real_clk = mpc5xxx_get_bus_frequency(node) / div->divider; + return (int)div->fdr; } static void __devinit mpc_i2c_setup_52xx(struct device_node *node, @@ -231,13 +239,14 @@ static void __devinit mpc_i2c_setup_52xx(struct device_node *node, return; } - ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler); + ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler, &i2c->real_clk); fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); if (ret >= 0) - dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr); + dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk, + fdr); } #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */ static void __devinit mpc_i2c_setup_52xx(struct device_node *node, @@ -334,14 +343,17 @@ static u32 __devinit mpc_i2c_get_sec_cfg_8xxx(void) } static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, - u32 prescaler) + u32 prescaler, u32 *real_clk) { const struct mpc_i2c_divider *div = NULL; u32 divider; int i; - if (clock == MPC_I2C_CLOCK_LEGACY) + if (clock == MPC_I2C_CLOCK_LEGACY) { + /* see below - default fdr = 0x1031 -> div = 16 * 3072 */ + *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072); return -EINVAL; + } /* Determine proper divider value */ if (of_device_is_compatible(node, "fsl,mpc8544-i2c")) @@ -364,6 +376,7 @@ static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, break; } + *real_clk = fsl_get_sys_freq() / prescaler / div->divider; return div ? (int)div->fdr : -EINVAL; } @@ -380,7 +393,7 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node, return; } - ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler); + ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler, &i2c->real_clk); fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); @@ -388,7 +401,7 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node, if (ret >= 0) dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", - clock, fdr >> 8, fdr & 0xff); + i2c->real_clk, fdr >> 8, fdr & 0xff); } #else /* !CONFIG_FSL_SOC */ @@ -500,10 +513,14 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) return -EINTR; } if (time_after(jiffies, orig_jiffies + HZ)) { + u8 status = readb(i2c->base + MPC_I2C_SR); + dev_dbg(i2c->dev, "timeout\n"); - if (readb(i2c->base + MPC_I2C_SR) == - (CSR_MCF | CSR_MBB | CSR_RXAK)) + if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { + writeb(status & ~CSR_MAL, + i2c->base + MPC_I2C_SR); mpc_i2c_fixup(i2c); + } return -EIO; } schedule(); @@ -595,6 +612,14 @@ static int __devinit fsl_i2c_probe(struct of_device *op, mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock, 0); } + prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen); + if (prop && plen == sizeof(u32)) { + mpc_ops.timeout = *prop * HZ / 1000000; + if (mpc_ops.timeout < 5) + mpc_ops.timeout = 5; + } + dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); + dev_set_drvdata(&op->dev, i2c); i2c->adap = mpc_ops; -- cgit v1.2.3-70-g09d2