From b174be02f3634460ac215d249617dee5ae446ae1 Mon Sep 17 00:00:00 2001 From: Kai Makisara Date: Sun, 24 Feb 2008 22:29:12 +0200 Subject: [SCSI] st: show options currently set in sysfs Show the current binary tape driver and mode options is sysfs. A file (options) is created in each directory in /sys/class/scsi_tape. The files contain masks showing the options. The mask bit definitions are the same as used when setting the options using the MTSETDRVBUFFER function in the MTIOCTOP ioctl (defined in include/linux/mtio.h). For example: > cat /sys/class/scsi_tape/nst0/options 0x00000d07 [jejb: updated doc with correction from Randy Dunlap] Signed-off-by: Kai Makisara Signed-off-by: James Bottomley --- Documentation/scsi/st.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'Documentation/scsi') diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt index 38f81188def..40752602c05 100644 --- a/Documentation/scsi/st.txt +++ b/Documentation/scsi/st.txt @@ -2,7 +2,7 @@ This file contains brief information about the SCSI tape driver. The driver is currently maintained by Kai Mäkisara (email Kai.Makisara@kolumbus.fi) -Last modified: Thu Feb 21 21:54:16 2008 by kai.makisara +Last modified: Sun Feb 24 21:59:07 2008 by kai.makisara BASICS @@ -133,6 +133,11 @@ the defaults set by the user. The value -1 means the default is not set. The file 'dev' contains the device numbers corresponding to this device. The links 'device' and 'driver' point to the SCSI device and driver entries. +Each directory also contains the entry 'options' which shows the currently +enabled driver and mode options. The value in the file is a bit mask where the +bit definitions are the same as those used with MTSETDRVBUFFER in setting the +options. + A link named 'tape' is made from the SCSI device directory to the class directory corresponding to the mode 0 auto-rewind device (e.g., st0). -- cgit v1.2.3-70-g09d2