From 25985edcedea6396277003854657b5f3cb31a628 Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Wed, 30 Mar 2011 22:57:33 -0300 Subject: Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi --- Documentation/sound/alsa/ALSA-Configuration.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/sound/alsa/ALSA-Configuration.txt') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3c1eddd9fcc..b9b7f30ab50 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -322,7 +322,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) or the value stored in the card's EEPROM for cards that have an EEPROM and their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can - be choosen freely from the options enumerated above. + be chosen freely from the options enumerated above. If dma2 is specified and different from dma1, the card will operate in full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to @@ -356,7 +356,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) or the value stored in the card's EEPROM for cards that have an EEPROM and their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can - be choosen freely from the options enumerated above. + be chosen freely from the options enumerated above. If dma2 is specified and different from dma1, the card will operate in full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to -- cgit v1.2.3-70-g09d2