From 8c68e2f7885b22f0a63bf087752a46b690d6b6ea Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 16 Sep 2009 01:44:00 +0400 Subject: powerpc/86xx: Add power management support for MPC8610HPCD boards This patch adds needed nodes and properties to support suspend/resume on the MPC8610HPCD boards. There is a dedicated switch (SW9) that is used to wake up the boards. By default the SW9 button is routed to IRQ8, but could be re-routed (via PIXIS) to sreset. With 'no_console_suspend' kernel command line argument specified, the board is also able to wakeup upon serial port input. Signed-off-by: Anton Vorontsov Acked-by: Scott Wood [dts] Signed-off-by: Kumar Gala --- Documentation/powerpc/dts-bindings/fsl/board.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt index e8b5bc24d0a..39e941515a3 100644 --- a/Documentation/powerpc/dts-bindings/fsl/board.txt +++ b/Documentation/powerpc/dts-bindings/fsl/board.txt @@ -20,12 +20,16 @@ Required properities: - compatible : should be "fsl,fpga-pixis". - reg : should contain the address and the length of the FPPGA register set. +- interrupt-parent: should specify phandle for the interrupt controller. +- interrupts : should specify event (wakeup) IRQ. Example (MPC8610HPCD): board-control@e8000000 { compatible = "fsl,fpga-pixis"; reg = <0xe8000000 32>; + interrupt-parent = <&mpic>; + interrupts = <8 8>; }; * Freescale BCSR GPIO banks -- cgit v1.2.3-70-g09d2 From 13b600b59df287a175b1476d2d588ab935092b58 Mon Sep 17 00:00:00 2001 From: Albrecht Dreß Date: Fri, 13 Nov 2009 11:09:30 -0700 Subject: mpc52xx/wdt: OF property to enable the WDT on boot MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the "fsl,wdt-on-boot" OF property as to reserve a GPT as WDT which may be a requirement in safety-related (e.g. ISO/EN 61508) applications. Signed-off-by: Albrecht Dreß Signed-off-by: Grant Likely --- Documentation/powerpc/dts-bindings/fsl/mpc5200.txt | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt index 8447fd7090d..ddd5ee32ea6 100644 --- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt +++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt @@ -103,7 +103,22 @@ fsl,mpc5200-gpt nodes --------------------- On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board design supports the internal wdt, then the device node for GPT0 should -include the empty property 'fsl,has-wdt'. +include the empty property 'fsl,has-wdt'. Note that this does not activate +the watchdog. The timer will function as a GPT if the timer api is used, and +it will function as watchdog if the watchdog device is used. The watchdog +mode has priority over the gpt mode, i.e. if the watchdog is activated, any +gpt api call to this timer will fail with -EBUSY. + +If you add the property + fsl,wdt-on-boot = ; +GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to it. +If n>0, the watchdog is started with a timeout of n seconds. If n=0, the +configuration of the watchdog is not touched. This is useful in two cases: +- just mark GPT0 as watchdog, blocking gpt accesses, and configure it later; +- do not touch a configuration assigned by the boot loader which supervises + the boot process itself. + +The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option. An mpc5200-gpt can be used as a single line GPIO controller. To do so, add the following properties to the gpt node: -- cgit v1.2.3-70-g09d2 From 3aa565f53c396914a9406388efaa238e9c937fc6 Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Thu, 29 Oct 2009 19:22:53 +0000 Subject: powerpc/pseries: Add hooks to put the CPU into an appropriate offline state When a CPU is offlined on POWER currently, we call rtas_stop_self() and hand the CPU back to the resource pool. This path is used for DLPAR which will cause a change in the LPAR configuration which will be visible outside. This patch changes the default state a CPU is put into when it is offlined. On platforms which support ceding the processor to the hypervisor with latency hint specifier value, during a cpu offline operation, instead of calling rtas_stop_self(), we cede the vCPU to the hypervisor while passing a latency hint specifier value. The Hypervisor can use this hint to provide better energy savings. Also, during the offline operation, the control of the vCPU remains with the LPAR as oppposed to returning it to the resource pool. The patch achieves this by creating an infrastructure to set the preferred_offline_state() which can be either - CPU_STATE_OFFLINE: which is the current behaviour of calling rtas_stop_self() - CPU_STATE_INACTIVE: which cedes the vCPU to the hypervisor with the latency hint specifier. The codepath which wants to perform a DLPAR operation can set the preferred_offline_state() of a CPU to CPU_STATE_OFFLINE before invoking cpu_down(). The patch also provides a boot-time command line argument to disable/enable CPU_STATE_INACTIVE. Signed-off-by: Gautham R Shenoy Signed-off-by: Nathan Fontenot Signed-off-by: Benjamin Herrenschmidt --- Documentation/cpu-hotplug.txt | 6 + arch/powerpc/platforms/pseries/hotplug-cpu.c | 182 ++++++++++++++++++++++-- arch/powerpc/platforms/pseries/offline_states.h | 18 +++ arch/powerpc/platforms/pseries/smp.c | 19 +++ 4 files changed, 216 insertions(+), 9 deletions(-) create mode 100644 arch/powerpc/platforms/pseries/offline_states.h (limited to 'Documentation') diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index 9d620c153b0..4d4a644b505 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -49,6 +49,12 @@ maxcpus=n Restrict boot time cpus to n. Say if you have 4 cpus, using additional_cpus=n (*) Use this to limit hotpluggable cpus. This option sets cpu_possible_map = cpu_present_map + additional_cpus +cede_offline={"off","on"} Use this option to disable/enable putting offlined + processors to an extended H_CEDE state on + supported pseries platforms. + If nothing is specified, + cede_offline is set to "on". + (*) Option valid only for following architectures - ia64 diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index ebff6d9a4e3..6ea4698d917 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -30,6 +30,7 @@ #include #include "xics.h" #include "plpar_wrappers.h" +#include "offline_states.h" /* This version can't take the spinlock, because it never returns */ static struct rtas_args rtas_stop_self_args = { @@ -39,6 +40,55 @@ static struct rtas_args rtas_stop_self_args = { .rets = &rtas_stop_self_args.args[0], }; +static DEFINE_PER_CPU(enum cpu_state_vals, preferred_offline_state) = + CPU_STATE_OFFLINE; +static DEFINE_PER_CPU(enum cpu_state_vals, current_state) = CPU_STATE_OFFLINE; + +static enum cpu_state_vals default_offline_state = CPU_STATE_OFFLINE; + +static int cede_offline_enabled __read_mostly = 1; + +/* + * Enable/disable cede_offline when available. + */ +static int __init setup_cede_offline(char *str) +{ + if (!strcmp(str, "off")) + cede_offline_enabled = 0; + else if (!strcmp(str, "on")) + cede_offline_enabled = 1; + else + return 0; + return 1; +} + +__setup("cede_offline=", setup_cede_offline); + +enum cpu_state_vals get_cpu_current_state(int cpu) +{ + return per_cpu(current_state, cpu); +} + +void set_cpu_current_state(int cpu, enum cpu_state_vals state) +{ + per_cpu(current_state, cpu) = state; +} + +enum cpu_state_vals get_preferred_offline_state(int cpu) +{ + return per_cpu(preferred_offline_state, cpu); +} + +void set_preferred_offline_state(int cpu, enum cpu_state_vals state) +{ + per_cpu(preferred_offline_state, cpu) = state; +} + +void set_default_offline_state(int cpu) +{ + per_cpu(preferred_offline_state, cpu) = default_offline_state; +} + static void rtas_stop_self(void) { struct rtas_args *args = &rtas_stop_self_args; @@ -56,11 +106,61 @@ static void rtas_stop_self(void) static void pseries_mach_cpu_die(void) { + unsigned int cpu = smp_processor_id(); + unsigned int hwcpu = hard_smp_processor_id(); + u8 cede_latency_hint = 0; + local_irq_disable(); idle_task_exit(); xics_teardown_cpu(); - unregister_slb_shadow(hard_smp_processor_id(), __pa(get_slb_shadow())); - rtas_stop_self(); + + if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { + set_cpu_current_state(cpu, CPU_STATE_INACTIVE); + cede_latency_hint = 2; + + get_lppaca()->idle = 1; + if (!get_lppaca()->shared_proc) + get_lppaca()->donate_dedicated_cpu = 1; + + printk(KERN_INFO + "cpu %u (hwid %u) ceding for offline with hint %d\n", + cpu, hwcpu, cede_latency_hint); + while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { + extended_cede_processor(cede_latency_hint); + printk(KERN_INFO "cpu %u (hwid %u) returned from cede.\n", + cpu, hwcpu); + printk(KERN_INFO + "Decrementer value = %x Timebase value = %llx\n", + get_dec(), get_tb()); + } + + printk(KERN_INFO "cpu %u (hwid %u) got prodded to go online\n", + cpu, hwcpu); + + if (!get_lppaca()->shared_proc) + get_lppaca()->donate_dedicated_cpu = 0; + get_lppaca()->idle = 0; + } + + if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) { + unregister_slb_shadow(hwcpu, __pa(get_slb_shadow())); + + /* + * NOTE: Calling start_secondary() here for now to + * start new context. + * However, need to do it cleanly by resetting the + * stack pointer. + */ + start_secondary(); + + } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) { + + set_cpu_current_state(cpu, CPU_STATE_OFFLINE); + unregister_slb_shadow(hard_smp_processor_id(), + __pa(get_slb_shadow())); + rtas_stop_self(); + } + /* Should never get here... */ BUG(); for(;;); @@ -106,18 +206,43 @@ static int pseries_cpu_disable(void) return 0; } +/* + * pseries_cpu_die: Wait for the cpu to die. + * @cpu: logical processor id of the CPU whose death we're awaiting. + * + * This function is called from the context of the thread which is performing + * the cpu-offline. Here we wait for long enough to allow the cpu in question + * to self-destroy so that the cpu-offline thread can send the CPU_DEAD + * notifications. + * + * OTOH, pseries_mach_cpu_die() is called by the @cpu when it wants to + * self-destruct. + */ static void pseries_cpu_die(unsigned int cpu) { int tries; - int cpu_status; + int cpu_status = 1; unsigned int pcpu = get_hard_smp_processor_id(cpu); - for (tries = 0; tries < 25; tries++) { - cpu_status = query_cpu_stopped(pcpu); - if (cpu_status == 0 || cpu_status == -1) - break; - cpu_relax(); + if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { + cpu_status = 1; + for (tries = 0; tries < 1000; tries++) { + if (get_cpu_current_state(cpu) == CPU_STATE_INACTIVE) { + cpu_status = 0; + break; + } + cpu_relax(); + } + } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) { + + for (tries = 0; tries < 25; tries++) { + cpu_status = query_cpu_stopped(pcpu); + if (cpu_status == 0 || cpu_status == -1) + break; + cpu_relax(); + } } + if (cpu_status != 0) { printk("Querying DEAD? cpu %i (%i) shows %i\n", cpu, pcpu, cpu_status); @@ -252,10 +377,41 @@ static struct notifier_block pseries_smp_nb = { .notifier_call = pseries_smp_notifier, }; +#define MAX_CEDE_LATENCY_LEVELS 4 +#define CEDE_LATENCY_PARAM_LENGTH 10 +#define CEDE_LATENCY_PARAM_MAX_LENGTH \ + (MAX_CEDE_LATENCY_LEVELS * CEDE_LATENCY_PARAM_LENGTH * sizeof(char)) +#define CEDE_LATENCY_TOKEN 45 + +static char cede_parameters[CEDE_LATENCY_PARAM_MAX_LENGTH]; + +static int parse_cede_parameters(void) +{ + int call_status; + + memset(cede_parameters, 0, CEDE_LATENCY_PARAM_MAX_LENGTH); + call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, + NULL, + CEDE_LATENCY_TOKEN, + __pa(cede_parameters), + CEDE_LATENCY_PARAM_MAX_LENGTH); + + if (call_status != 0) + printk(KERN_INFO "CEDE_LATENCY: \ + %s %s Error calling get-system-parameter(0x%x)\n", + __FILE__, __func__, call_status); + else + printk(KERN_INFO "CEDE_LATENCY: \ + get-system-parameter successful.\n"); + + return call_status; +} + static int __init pseries_cpu_hotplug_init(void) { struct device_node *np; const char *typep; + int cpu; for_each_node_by_name(np, "interrupt-controller") { typep = of_get_property(np, "compatible", NULL); @@ -283,8 +439,16 @@ static int __init pseries_cpu_hotplug_init(void) smp_ops->cpu_die = pseries_cpu_die; /* Processors can be added/removed only on LPAR */ - if (firmware_has_feature(FW_FEATURE_LPAR)) + if (firmware_has_feature(FW_FEATURE_LPAR)) { pSeries_reconfig_notifier_register(&pseries_smp_nb); + cpu_maps_update_begin(); + if (cede_offline_enabled && parse_cede_parameters() == 0) { + default_offline_state = CPU_STATE_INACTIVE; + for_each_online_cpu(cpu) + set_default_offline_state(cpu); + } + cpu_maps_update_done(); + } return 0; } diff --git a/arch/powerpc/platforms/pseries/offline_states.h b/arch/powerpc/platforms/pseries/offline_states.h new file mode 100644 index 00000000000..22574e0d9d9 --- /dev/null +++ b/arch/powerpc/platforms/pseries/offline_states.h @@ -0,0 +1,18 @@ +#ifndef _OFFLINE_STATES_H_ +#define _OFFLINE_STATES_H_ + +/* Cpu offline states go here */ +enum cpu_state_vals { + CPU_STATE_OFFLINE, + CPU_STATE_INACTIVE, + CPU_STATE_ONLINE, + CPU_MAX_OFFLINE_STATES +}; + +extern enum cpu_state_vals get_cpu_current_state(int cpu); +extern void set_cpu_current_state(int cpu, enum cpu_state_vals state); +extern enum cpu_state_vals get_preferred_offline_state(int cpu); +extern void set_preferred_offline_state(int cpu, enum cpu_state_vals state); +extern void set_default_offline_state(int cpu); +extern int start_secondary(void); +#endif diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 440000cc713..8868c012268 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -48,6 +48,7 @@ #include "plpar_wrappers.h" #include "pseries.h" #include "xics.h" +#include "offline_states.h" /* @@ -84,6 +85,9 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) /* Fixup atomic count: it exited inside IRQ handler. */ task_thread_info(paca[lcpu].__current)->preempt_count = 0; + if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE) + goto out; + /* * If the RTAS start-cpu token does not exist then presume the * cpu is already spinning. @@ -98,6 +102,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) return 0; } +out: return 1; } @@ -111,12 +116,16 @@ static void __devinit smp_xics_setup_cpu(int cpu) vpa_init(cpu); cpu_clear(cpu, of_spin_map); + set_cpu_current_state(cpu, CPU_STATE_ONLINE); + set_default_offline_state(cpu); } #endif /* CONFIG_XICS */ static void __devinit smp_pSeries_kick_cpu(int nr) { + long rc; + unsigned long hcpuid; BUG_ON(nr < 0 || nr >= NR_CPUS); if (!smp_startup_cpu(nr)) @@ -128,6 +137,16 @@ static void __devinit smp_pSeries_kick_cpu(int nr) * the processor will continue on to secondary_start */ paca[nr].cpu_start = 1; + + set_preferred_offline_state(nr, CPU_STATE_ONLINE); + + if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) { + hcpuid = get_hard_smp_processor_id(nr); + rc = plpar_hcall_norets(H_PROD, hcpuid); + if (rc != H_SUCCESS) + panic("Error: Prod to wake up processor %d Ret= %ld\n", + nr, rc); + } } static int smp_pSeries_cpu_bootable(unsigned int nr) -- cgit v1.2.3-70-g09d2 From 12633e803a2a556f6469e0933d08233d0844a2d9 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Wed, 25 Nov 2009 17:23:25 +0000 Subject: sysfs/cpu: Add probe/release files Version 3 of this patch is updated with documentation added to Documentation/ABI. There are no changes to any of the C code from v2 of the patch. In order to support kernel DLPAR of CPU resources we need to provide an interface to add (probe) and remove (release) the resource from the system. This patch Creates new generic probe and release sysfs files to facilitate cpu probe/release. The probe/release interface provides for allowing each arch to supply their own routines for implementing the backend of adding and removing cpus to/from the system. This also creates the powerpc specific stubs to handle the arch callouts from writes to the sysfs files. The creation and use of these files is regulated by the CONFIG_ARCH_CPU_PROBE_RELEASE option so that only architectures that need the capability will have the files created. Signed-off-by: Nathan Fontenot Signed-off-by: Benjamin Herrenschmidt --- Documentation/ABI/testing/sysfs-devices-system-cpu | 15 ++++++++++ arch/powerpc/Kconfig | 4 +++ arch/powerpc/include/asm/machdep.h | 5 ++++ arch/powerpc/kernel/sysfs.c | 19 +++++++++++++ drivers/base/cpu.c | 32 ++++++++++++++++++++++ include/linux/cpu.h | 2 ++ 6 files changed, 77 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index a703b9e9aeb..d868a11c94a 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -62,6 +62,21 @@ Description: CPU topology files that describe kernel limits related to See Documentation/cputopology.txt for more information. +What: /sys/devices/system/cpu/probe + /sys/devices/system/cpu/release +Date: November 2009 +Contact: Linux kernel mailing list +Description: Dynamic addition and removal of CPU's. This is not hotplug + removal, this is meant complete removal/addition of the CPU + from the system. + + probe: writes to this file will dynamically add a CPU to the + system. Information written to the file to add CPU's is + architecture specific. + + release: writes to this file dynamically remove a CPU from + the system. Information writtento the file to remove CPU's + is architecture specific. What: /sys/devices/system/cpu/cpu#/node Date: October 2009 diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 5dbd375a3f2..0df57466e78 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -320,6 +320,10 @@ config HOTPLUG_CPU Say N if you are unsure. +config ARCH_CPU_PROBE_RELEASE + def_bool y + depends on HOTPLUG_CPU + config ARCH_ENABLE_MEMORY_HOTPLUG def_bool y diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 9efa2be7833..9f0fc9e6ce0 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -266,6 +266,11 @@ struct machdep_calls { void (*suspend_disable_irqs)(void); void (*suspend_enable_irqs)(void); #endif + +#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE + ssize_t (*cpu_probe)(const char *, size_t); + ssize_t (*cpu_release)(const char *, size_t); +#endif }; extern void e500_idle(void); diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 956ab33fd73..e235e52dc4f 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -461,6 +461,25 @@ static void unregister_cpu_online(unsigned int cpu) cacheinfo_cpu_offline(cpu); } + +#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE +ssize_t arch_cpu_probe(const char *buf, size_t count) +{ + if (ppc_md.cpu_probe) + return ppc_md.cpu_probe(buf, count); + + return -EINVAL; +} + +ssize_t arch_cpu_release(const char *buf, size_t count) +{ + if (ppc_md.cpu_release) + return ppc_md.cpu_release(buf, count); + + return -EINVAL; +} +#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */ + #endif /* CONFIG_HOTPLUG_CPU */ static int __cpuinit sysfs_cpu_notify(struct notifier_block *self, diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index e62a4ccea54..7c03af7b84a 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -72,6 +72,38 @@ void unregister_cpu(struct cpu *cpu) per_cpu(cpu_sys_devices, logical_cpu) = NULL; return; } + +#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE +static ssize_t cpu_probe_store(struct class *class, const char *buf, + size_t count) +{ + return arch_cpu_probe(buf, count); +} + +static ssize_t cpu_release_store(struct class *class, const char *buf, + size_t count) +{ + return arch_cpu_release(buf, count); +} + +static CLASS_ATTR(probe, S_IWUSR, NULL, cpu_probe_store); +static CLASS_ATTR(release, S_IWUSR, NULL, cpu_release_store); + +int __init cpu_probe_release_init(void) +{ + int rc; + + rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj, + &class_attr_probe.attr); + if (!rc) + rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj, + &class_attr_release.attr); + + return rc; +} +device_initcall(cpu_probe_release_init); +#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */ + #else /* ... !CONFIG_HOTPLUG_CPU */ static inline void register_cpu_control(struct cpu *cpu) { diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 47536197ffd..c972f7ccb7d 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -43,6 +43,8 @@ extern int sched_create_sysfs_power_savings_entries(struct sysdev_class *cls); #ifdef CONFIG_HOTPLUG_CPU extern void unregister_cpu(struct cpu *cpu); +extern ssize_t arch_cpu_probe(const char *, size_t); +extern ssize_t arch_cpu_release(const char *, size_t); #endif struct notifier_block; -- cgit v1.2.3-70-g09d2