From bb9fbe2ddd6d6111c5fe5987fa1e71da7d2ab854 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Mon, 27 Jan 2014 11:43:04 -0500 Subject: AF_PACKET: Add documentation for queue mapping fanout mode Recently I added a new AF_PACKET fanout operation mode in commit 2d36097, but I forgot to document it. Add PACKET_FANOUT_QM as an available mode in the af_packet documentation. Applies to net-next. Signed-off-by: Neil Horman CC: "David S. Miller" CC: Daniel Borkmann Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- Documentation/networking/packet_mmap.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index 91ffe1d9e8c..1404674c0a0 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -583,6 +583,7 @@ Currently implemented fanout policies are: - PACKET_FANOUT_CPU: schedule to socket by CPU packet arrives on - PACKET_FANOUT_RND: schedule to socket by random selection - PACKET_FANOUT_ROLLOVER: if one socket is full, rollover to another + - PACKET_FANOUT_QM: schedule to socket by skbs recorded queue_mapping Minimal example code by David S. Miller (try things like "./test eth0 hash", "./test eth0 lb", etc.): -- cgit v1.2.3-70-g09d2 From d922e1cb1ea17ac7f0a5c3c2be98d4bd80d055b8 Mon Sep 17 00:00:00 2001 From: Martin Schwenke Date: Tue, 28 Jan 2014 15:26:42 +1100 Subject: net: Document promote_secondaries From 038a821667f62c496f2bbae27081b1b612122a97 Mon Sep 17 00:00:00 2001 From: Martin Schwenke Date: Tue, 28 Jan 2014 15:16:49 +1100 Subject: [PATCH] net: Document promote_secondaries This option was added a long time ago... commit 8f937c6099858eee15fae14009dcbd05177fa91d Author: Harald Welte Date: Sun May 29 20:23:46 2005 -0700 [IPV4]: Primary and secondary addresses Signed-off-by: Martin Schwenke Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 5de03740cdd..ab42c95f998 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1088,6 +1088,12 @@ igmpv3_unsolicited_report_interval - INTEGER IGMPv3 report retransmit will take place. Default: 1000 (1 seconds) +promote_secondaries - BOOLEAN + When a primary IP address is removed from this interface + promote a corresponding secondary IP address instead of + removing all the corresponding secondary IP addresses. + + tag - INTEGER Allows you to write a number, which can be used as required. Default value is 0. -- cgit v1.2.3-70-g09d2 From 731ff244236ad37dbb4a4b2adc7e2c104c01153f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 28 Jan 2014 02:47:41 +0300 Subject: DT: net: davinci_emac: "ti, davinci-rmii-en" property is actually optional Though described as required, the "ti,davinci-rmii-en" property for the DaVinci EMAC binding seems actually optional, as the driver should happily work without it; the property is not specified either in the example device node or in the actual EMAC device node for DA850 device tree, only AM3517 one. While at it, document the property better... Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/davinci_emac.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt index ca0911a20e8..49103e457d9 100644 --- a/Documentation/devicetree/bindings/net/davinci_emac.txt +++ b/Documentation/devicetree/bindings/net/davinci_emac.txt @@ -10,7 +10,6 @@ Required properties: - ti,davinci-ctrl-mod-reg-offset: offset to control module register - ti,davinci-ctrl-ram-offset: offset to control module ram - ti,davinci-ctrl-ram-size: size of control module ram -- ti,davinci-rmii-en: use RMII - ti,davinci-no-bd-ram: has the emac controller BD RAM - interrupts: interrupt mapping for the davinci emac interrupts sources: 4 sources: Date: Tue, 28 Jan 2014 02:49:39 +0300 Subject: DT: net: davinci_emac: "ti, davinci-no-bd-ram" property is actually optional The "ti,davinci-no-bd-ram" property for the DaVinci EMAC binding simply can't be required one, as it's boolean (which means it's absent if false). While at it, document the property better... Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/davinci_emac.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt index 49103e457d9..6e356d15154 100644 --- a/Documentation/devicetree/bindings/net/davinci_emac.txt +++ b/Documentation/devicetree/bindings/net/davinci_emac.txt @@ -10,7 +10,6 @@ Required properties: - ti,davinci-ctrl-mod-reg-offset: offset to control module register - ti,davinci-ctrl-ram-offset: offset to control module ram - ti,davinci-ctrl-ram-size: size of control module ram -- ti,davinci-no-bd-ram: has the emac controller BD RAM - interrupts: interrupt mapping for the davinci emac interrupts sources: 4 sources: