From a08f6e04d74478d91f34a0484e69e89870adb33d Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Fri, 13 Feb 2009 12:03:17 -0700 Subject: PCI: Documentation: fix minor PCIe HOWTO thinko Update doc to correctly refer to replacing the pci_register_driver API, and not the non-existent "pci_module_init" API. Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- Documentation/PCI/PCIEBUS-HOWTO.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/PCI/PCIEBUS-HOWTO.txt b/Documentation/PCI/PCIEBUS-HOWTO.txt index 9a07e38631b..6bd5f372ade 100644 --- a/Documentation/PCI/PCIEBUS-HOWTO.txt +++ b/Documentation/PCI/PCIEBUS-HOWTO.txt @@ -93,7 +93,7 @@ the PCI Express Port Bus driver from loading a service driver. int pcie_port_service_register(struct pcie_port_service_driver *new) -This API replaces the Linux Driver Model's pci_module_init API. A +This API replaces the Linux Driver Model's pci_register_driver API. A service driver should always calls pcie_port_service_register at module init. Note that after service driver being loaded, calls such as pci_enable_device(dev) and pci_set_master(dev) are no longer -- cgit v1.2.3-70-g09d2 From f9aa28adfc6a4b01268ebb6d88566cca8627905f Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Sat, 3 Jan 2009 21:09:27 +0200 Subject: doc: mmiotrace.txt, buffer size control change Impact: prevents confusing the user when buffer size is inadequate The tracing framework offers a resizeable buffer, which mmiotrace uses to record events. If the buffer is full, the following events will be lost. Events should not be lost, so the documentation instructs the user to increase the buffer size. The buffer size is set via a debugfs file. Mmiotrace documentation was not updated the same time the debugfs file was changed. The old file was tracing/trace_entries and first contained the number of entries the buffer had space for, per cpu. Nowadays this file is replaced with the file tracing/buffer_size_kb, which tells the amount of memory reserved for the buffer, per cpu, in kilobytes. Previously, a flag had to be toggled via the debugfs file tracing/tracing_enabled when the buffer size was changed. This is no longer necessary. The mmiotrace documentation is updated to reflect the current state of the tracing framework. Signed-off-by: Pekka Paalanen Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- Documentation/tracers/mmiotrace.txt | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt index cde23b4a12a..5731c67abc5 100644 --- a/Documentation/tracers/mmiotrace.txt +++ b/Documentation/tracers/mmiotrace.txt @@ -78,12 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If events were lost, the trace is incomplete. You should enlarge the buffers and try again. Buffers are enlarged by first seeing how large the current buffers are: -$ cat /debug/tracing/trace_entries +$ cat /debug/tracing/buffer_size_kb gives you a number. Approximately double this number and write it back, for instance: -$ echo 0 > /debug/tracing/tracing_enabled -$ echo 128000 > /debug/tracing/trace_entries -$ echo 1 > /debug/tracing/tracing_enabled +$ echo 128000 > /debug/tracing/buffer_size_kb Then start again from the top. If you are doing a trace for a driver project, e.g. Nouveau, you should also -- cgit v1.2.3-70-g09d2 From b851ee7921fabdd7dfc96ffc4e9609f5062bd12b Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 18 Feb 2009 14:48:14 -0800 Subject: cgroups: update documentation about css_set hash table The css_set hash table was introduced in 2.6.26, so update the documentation accordingly. Signed-off-by: Li Zefan Acked-by: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cgroups/cgroups.txt | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index d9e5d6f41b9..93feb844448 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -252,10 +252,8 @@ cgroup file system directories. When a task is moved from one cgroup to another, it gets a new css_set pointer - if there's an already existing css_set with the desired collection of cgroups then that group is reused, else a new -css_set is allocated. Note that the current implementation uses a -linear search to locate an appropriate existing css_set, so isn't -very efficient. A future version will use a hash table for better -performance. +css_set is allocated. The appropriate existing css_set is located by +looking into a hash table. To allow access from a cgroup to the css_sets (and hence tasks) that comprise it, a set of cg_cgroup_link objects form a lattice; -- cgit v1.2.3-70-g09d2 From ef2cfc790bf5f0ff189b01eabc0f4feb5e8524df Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 18 Feb 2009 14:48:23 -0800 Subject: hp accelerometer: add freefall detection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds freefall handling to hp_accel driver. According to HP, it should just work, without us having to set the chip up by hand. hpfall.c is example .c program that parks the disk when accelerometer detects free fall. It should work; for now, it uses fixed 20seconds protection period. Signed-off-by: Pavel Machek Cc: Thomas Renninger Cc: Éric Piel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/hwmon/hpfall.c | 101 +++++++++++++++++++++++++ Documentation/hwmon/lis3lv02d | 8 ++ drivers/hwmon/hp_accel.c | 27 +++++++ drivers/hwmon/lis3lv02d.c | 172 +++++++++++++++++++++++++++++++++++++----- drivers/hwmon/lis3lv02d.h | 5 ++ 5 files changed, 296 insertions(+), 17 deletions(-) create mode 100644 Documentation/hwmon/hpfall.c (limited to 'Documentation') diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c new file mode 100644 index 00000000000..bbea1ccfd46 --- /dev/null +++ b/Documentation/hwmon/hpfall.c @@ -0,0 +1,101 @@ +/* Disk protection for HP machines. + * + * Copyright 2008 Eric Piel + * Copyright 2009 Pavel Machek + * + * GPLv2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void write_int(char *path, int i) +{ + char buf[1024]; + int fd = open(path, O_RDWR); + if (fd < 0) { + perror("open"); + exit(1); + } + sprintf(buf, "%d", i); + if (write(fd, buf, strlen(buf)) != strlen(buf)) { + perror("write"); + exit(1); + } + close(fd); +} + +void set_led(int on) +{ + write_int("/sys/class/leds/hp::hddprotect/brightness", on); +} + +void protect(int seconds) +{ + write_int("/sys/block/sda/device/unload_heads", seconds*1000); +} + +int on_ac(void) +{ +// /sys/class/power_supply/AC0/online +} + +int lid_open(void) +{ +// /proc/acpi/button/lid/LID/state +} + +void ignore_me(void) +{ + protect(0); + set_led(0); + +} + +int main(int argc, char* argv[]) +{ + int fd, ret; + + fd = open("/dev/freefall", O_RDONLY); + if (fd < 0) { + perror("open"); + return EXIT_FAILURE; + } + + signal(SIGALRM, ignore_me); + + for (;;) { + unsigned char count; + + ret = read(fd, &count, sizeof(count)); + alarm(0); + if ((ret == -1) && (errno == EINTR)) { + /* Alarm expired, time to unpark the heads */ + continue; + } + + if (ret != sizeof(count)) { + perror("read"); + break; + } + + protect(21); + set_led(1); + if (1 || on_ac() || lid_open()) { + alarm(2); + } else { + alarm(20); + } + } + + close(fd); + return EXIT_SUCCESS; +} diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d index 0fcfc4a7ccd..287f8c90265 100644 --- a/Documentation/hwmon/lis3lv02d +++ b/Documentation/hwmon/lis3lv02d @@ -33,6 +33,14 @@ rate - reports the sampling rate of the accelerometer device in HZ This driver also provides an absolute input class device, allowing the laptop to act as a pinball machine-esque joystick. +Another feature of the driver is misc device called "freefall" that +acts similar to /dev/rtc and reacts on free-fall interrupts received +from the device. It supports blocking operations, poll/select and +fasync operation modes. You must read 1 bytes from the device. The +result is number of free-fall interrupts since the last successful +read (or 255 if number of interrupts would not fit). + + Axes orientation ---------------- diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index abf4dfc8ec2..dcefe1d2adb 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -213,6 +213,30 @@ static struct delayed_led_classdev hpled_led = { .set_brightness = hpled_set, }; +static acpi_status +lis3lv02d_get_resource(struct acpi_resource *resource, void *context) +{ + if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) { + struct acpi_resource_extended_irq *irq; + u32 *device_irq = context; + + irq = &resource->data.extended_irq; + *device_irq = irq->interrupts[0]; + } + + return AE_OK; +} + +static void lis3lv02d_enum_resources(struct acpi_device *device) +{ + acpi_status status; + + status = acpi_walk_resources(device->handle, METHOD_NAME__CRS, + lis3lv02d_get_resource, &adev.irq); + if (ACPI_FAILURE(status)) + printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n"); +} + static int lis3lv02d_add(struct acpi_device *device) { u8 val; @@ -247,6 +271,9 @@ static int lis3lv02d_add(struct acpi_device *device) if (ret) return ret; + /* obtain IRQ number of our device from ACPI */ + lis3lv02d_enum_resources(adev.device); + ret = lis3lv02d_init_device(&adev); if (ret) { flush_work(&hpled_led.work); diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 219d2d0d5a6..3afa3afc77f 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -3,7 +3,7 @@ * * Copyright (C) 2007-2008 Yan Burman * Copyright (C) 2008 Eric Piel - * Copyright (C) 2008 Pavel Machek + * Copyright (C) 2008-2009 Pavel Machek * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include "lis3lv02d.h" @@ -55,7 +56,10 @@ /* Maximum value our axis may get for the input device (signed 12 bits) */ #define MDPS_MAX_VAL 2048 -struct acpi_lis3lv02d adev; +struct acpi_lis3lv02d adev = { + .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait), +}; + EXPORT_SYMBOL_GPL(adev); static int lis3lv02d_add_fs(struct acpi_device *device); @@ -110,26 +114,13 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) void lis3lv02d_poweroff(acpi_handle handle) { adev.is_on = 0; - /* disable X,Y,Z axis and power down */ - adev.write(handle, CTRL_REG1, 0x00); } EXPORT_SYMBOL_GPL(lis3lv02d_poweroff); void lis3lv02d_poweron(acpi_handle handle) { - u8 val; - adev.is_on = 1; adev.init(handle); - adev.write(handle, FF_WU_CFG, 0); - /* - * BDU: LSB and MSB values are not updated until both have been read. - * So the value read will always be correct. - * IEN: Interrupt for free-fall and DD, not for data-ready. - */ - adev.read(handle, CTRL_REG2, &val); - val |= CTRL2_BDU | CTRL2_IEN; - adev.write(handle, CTRL_REG2, val); } EXPORT_SYMBOL_GPL(lis3lv02d_poweron); @@ -162,6 +153,140 @@ static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev) mutex_unlock(&dev->lock); } +static irqreturn_t lis302dl_interrupt(int irq, void *dummy) +{ + /* + * Be careful: on some HP laptops the bios force DD when on battery and + * the lid is closed. This leads to interrupts as soon as a little move + * is done. + */ + atomic_inc(&adev.count); + + wake_up_interruptible(&adev.misc_wait); + kill_fasync(&adev.async_queue, SIGIO, POLL_IN); + return IRQ_HANDLED; +} + +static int lis3lv02d_misc_open(struct inode *inode, struct file *file) +{ + int ret; + + if (test_and_set_bit(0, &adev.misc_opened)) + return -EBUSY; /* already open */ + + atomic_set(&adev.count, 0); + + /* + * The sensor can generate interrupts for free-fall and direction + * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep + * the things simple and _fast_ we activate it only for free-fall, so + * no need to read register (very slow with ACPI). For the same reason, + * we forbid shared interrupts. + * + * IRQF_TRIGGER_RISING seems pointless on HP laptops because the + * io-apic is not configurable (and generates a warning) but I keep it + * in case of support for other hardware. + */ + ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING, + DRIVER_NAME, &adev); + + if (ret) { + clear_bit(0, &adev.misc_opened); + printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq); + return -EBUSY; + } + lis3lv02d_increase_use(&adev); + printk("lis3: registered interrupt %d\n", adev.irq); + return 0; +} + +static int lis3lv02d_misc_release(struct inode *inode, struct file *file) +{ + fasync_helper(-1, file, 0, &adev.async_queue); + lis3lv02d_decrease_use(&adev); + free_irq(adev.irq, &adev); + clear_bit(0, &adev.misc_opened); /* release the device */ + return 0; +} + +static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf, + size_t count, loff_t *pos) +{ + DECLARE_WAITQUEUE(wait, current); + u32 data; + unsigned char byte_data; + ssize_t retval = 1; + + if (count < 1) + return -EINVAL; + + add_wait_queue(&adev.misc_wait, &wait); + while (true) { + set_current_state(TASK_INTERRUPTIBLE); + data = atomic_xchg(&adev.count, 0); + if (data) + break; + + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + goto out; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + goto out; + } + + schedule(); + } + + if (data < 255) + byte_data = data; + else + byte_data = 255; + + /* make sure we are not going into copy_to_user() with + * TASK_INTERRUPTIBLE state */ + set_current_state(TASK_RUNNING); + if (copy_to_user(buf, &byte_data, sizeof(byte_data))) + retval = -EFAULT; + +out: + __set_current_state(TASK_RUNNING); + remove_wait_queue(&adev.misc_wait, &wait); + + return retval; +} + +static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait) +{ + poll_wait(file, &adev.misc_wait, wait); + if (atomic_read(&adev.count)) + return POLLIN | POLLRDNORM; + return 0; +} + +static int lis3lv02d_misc_fasync(int fd, struct file *file, int on) +{ + return fasync_helper(fd, file, on, &adev.async_queue); +} + +static const struct file_operations lis3lv02d_misc_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = lis3lv02d_misc_read, + .open = lis3lv02d_misc_open, + .release = lis3lv02d_misc_release, + .poll = lis3lv02d_misc_poll, + .fasync = lis3lv02d_misc_fasync, +}; + +static struct miscdevice lis3lv02d_misc_device = { + .minor = MISC_DYNAMIC_MINOR, + .name = "freefall", + .fops = &lis3lv02d_misc_fops, +}; + /** * lis3lv02d_joystick_kthread - Kthread polling function * @data: unused - here to conform to threadfn prototype @@ -203,7 +328,6 @@ static void lis3lv02d_joystick_close(struct input_dev *input) lis3lv02d_decrease_use(&adev); } - static inline void lis3lv02d_calibrate_joystick(void) { lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib); @@ -250,6 +374,7 @@ void lis3lv02d_joystick_disable(void) if (!adev.idev) return; + misc_deregister(&lis3lv02d_misc_device); input_unregister_device(adev.idev); adev.idev = NULL; } @@ -268,6 +393,19 @@ int lis3lv02d_init_device(struct acpi_lis3lv02d *dev) if (lis3lv02d_joystick_enable()) printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); + printk("lis3_init_device: irq %d\n", dev->irq); + + /* if we did not get an IRQ from ACPI - we have nothing more to do */ + if (!dev->irq) { + printk(KERN_ERR DRIVER_NAME + ": No IRQ in ACPI. Disabling /dev/freefall\n"); + goto out; + } + + printk("lis3: registering device\n"); + if (misc_register(&lis3lv02d_misc_device)) + printk(KERN_ERR DRIVER_NAME ": misc_register failed\n"); +out: lis3lv02d_decrease_use(dev); return 0; } @@ -351,6 +489,6 @@ int lis3lv02d_remove_fs(void) EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs); MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); -MODULE_AUTHOR("Yan Burman and Eric Piel"); +MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h index 223f1c0763b..2e7597c42d8 100644 --- a/drivers/hwmon/lis3lv02d.h +++ b/drivers/hwmon/lis3lv02d.h @@ -170,6 +170,11 @@ struct acpi_lis3lv02d { unsigned char is_on; /* whether the device is on or off */ unsigned char usage; /* usage counter */ struct axis_conversion ac; /* hw -> logical axis */ + + u32 irq; /* IRQ number */ + struct fasync_struct *async_queue; /* queue for the misc device */ + wait_queue_head_t misc_wait; /* Wait queue for the misc device */ + unsigned long misc_opened; /* bit0: whether the device is open */ }; int lis3lv02d_init_device(struct acpi_lis3lv02d *dev); -- cgit v1.2.3-70-g09d2 From 97bef7dd05563807539122c488a5dd93ed327722 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Wed, 18 Feb 2009 14:48:40 -0800 Subject: Bernhard has moved Since I don't work for SUSE any more and the bwalle@suse.de address is invalid, correct it in the copyright headers and documentation. Signed-off-by: Bernhard Walle Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-firmware-memmap | 2 +- drivers/firmware/memmap.c | 2 +- include/linux/firmware-map.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-firmware-memmap b/Documentation/ABI/testing/sysfs-firmware-memmap index 0d99ee6ae02..eca0d65087d 100644 --- a/Documentation/ABI/testing/sysfs-firmware-memmap +++ b/Documentation/ABI/testing/sysfs-firmware-memmap @@ -1,6 +1,6 @@ What: /sys/firmware/memmap/ Date: June 2008 -Contact: Bernhard Walle +Contact: Bernhard Walle Description: On all platforms, the firmware provides a memory map which the kernel reads. The resources from that memory map are registered diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c index 261b9aa3f24..05aa2d406ac 100644 --- a/drivers/firmware/memmap.c +++ b/drivers/firmware/memmap.c @@ -1,7 +1,7 @@ /* * linux/drivers/firmware/memmap.c * Copyright (C) 2008 SUSE LINUX Products GmbH - * by Bernhard Walle + * by Bernhard Walle * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License v2.0 as published by diff --git a/include/linux/firmware-map.h b/include/linux/firmware-map.h index 6e199c8dfac..cca686b3912 100644 --- a/include/linux/firmware-map.h +++ b/include/linux/firmware-map.h @@ -1,7 +1,7 @@ /* * include/linux/firmware-map.h: * Copyright (C) 2008 SUSE LINUX Products GmbH - * by Bernhard Walle + * by Bernhard Walle * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License v2.0 as published by -- cgit v1.2.3-70-g09d2