From 768248256339da88d65088c8beffe1a3dcd9f1ca Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 17 Jun 2009 17:17:18 +0200 Subject: ALSA: hda - Add description about patch loading Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 46 +++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 88b7433d2f1..8bc9867c0a3 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -403,6 +403,52 @@ re-configure based on that state, run like below: ------------------------------------------------------------------------ +Early Patching +~~~~~~~~~~~~~~ +When CONFIG_SND_HDA_PATCH_LOADER=y is set, you can pass a "patch" as a +firmware file for modifying the HD-audio setup before initializing the +codec. This can work basically like the reconfiguration via sysfs in +the above, but it does it before the first codec configuration. + +The patch file looks like below: + +------------------------------------------------------------------------ + [codec] + 0x12345678 0xabcd1234 2 + + [model] + auto + + [pincfg] + 0x12 0x411111f0 + + [verb] + 0x20 0x500 0x03 + 0x20 0x400 0xff + + [hint] + hp_detect = yes +------------------------------------------------------------------------ + +The file needs to have a line `[codec]`. The next line should contain +three numbers indicating the codec vendor-id (0x12345678 in the +example), the codec subsystem-id (0xabcd1234) and the address (2) of +the codec. The rest patch entries are applied to this specified codec +until another codec entry is given. + +The `[model]` line allows to change the model name of the each codec. +In the example above, it will be changed to model=auto. +Note that this overrides the module option. + +After the `[pincfg]` line, the contents are parsed as the initial +default pin-configurations just like `user_pin_configs` sysfs above. +The values can be shown in user_pin_configs sysfs file, too. + +Similarly, the lines after `[verb]` are parsed as `init_verbs` +sysfs entries, and the lines after `[hint]` are parsed as `hints` +sysfs entries, respectively. + + Power-Saving ~~~~~~~~~~~~ The power-saving is a kind of auto-suspend of the device. When the -- cgit v1.2.3-70-g09d2 From 1e7b8c87cb53d9a14f1a9ef35eed739f68851f5c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 17 Jun 2009 17:30:54 +0200 Subject: ALSA: hda - More description about patch module option Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 4 ++++ Documentation/sound/alsa/HD-Audio.txt | 16 +++++++++++++++- 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 012858d2b11..414700b996a 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -749,6 +749,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. bdl_pos_adj - Specifies the DMA IRQ timing delay in samples. Passing -1 will make the driver to choose the appropriate value based on the controller chip. + patch - Specifies the early "patch" files to modify the HD-audio + setup before initializing the codecs. This option is + available only when CONFIG_SND_HDA_PATCH_LOADER=y is set. + See HD-Audio.txt for details. [Single (global) options] single_cmd - Use single immediate commands to communicate with diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 8bc9867c0a3..55aab116823 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -410,7 +410,7 @@ firmware file for modifying the HD-audio setup before initializing the codec. This can work basically like the reconfiguration via sysfs in the above, but it does it before the first codec configuration. -The patch file looks like below: +A patch file is a plain text file which looks like below: ------------------------------------------------------------------------ [codec] @@ -448,6 +448,20 @@ Similarly, the lines after `[verb]` are parsed as `init_verbs` sysfs entries, and the lines after `[hint]` are parsed as `hints` sysfs entries, respectively. +The hd-audio driver reads the file via request_firmware(). Thus, +a patch file has to be located on the appropriate firmware path, +typically, /lib/firmware. For example, when you pass the option +`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be +present. + +The patch module option is specific to each card instance, and you +need to give one file name for each instance, separated by commas. +For example, if you have two cards, one for an on-board analog and one +for an HDMI video board, you may pass patch option like below: +------------------------------------------------------------------------ + options snd-hda-intel patch=on-board-patch,hdmi-patch +------------------------------------------------------------------------ + Power-Saving ~~~~~~~~~~~~ -- cgit v1.2.3-70-g09d2 From 4953550a6ca399b644ef057626617465d8be9a7b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 30 Jun 2009 15:28:30 +0200 Subject: ALSA: hda - Merge patch_alc882() and patch_alc883() Merge patch_alc882() and patch_alc883() to the former one since both codecs have fairly similar connections but just a slight difference. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 12 +- sound/pci/hda/patch_realtek.c | 1979 ++++++++++---------------- 2 files changed, 766 insertions(+), 1225 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 939a3dd5814..a1895d7f3cf 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -114,8 +114,8 @@ ALC662/663/272 samsung-nc10 Samsung NC10 mini notebook auto auto-config reading BIOS (default) -ALC882/885 -========== +ALC882/883/885/888/889 +====================== 3stack-dig 3-jack with SPDIF I/O 6stack-dig 6-jack digital with SPDIF I/O arima Arima W820Di1 @@ -127,12 +127,8 @@ ALC882/885 mbp3 Macbook Pro rev3 imac24 iMac 24'' with jack detection w2jc ASUS W2JC - auto auto-config reading BIOS (default) - -ALC883/888 -========== - 3stack-dig 3-jack with SPDIF I/O - 6stack-dig 6-jack digital with SPDIF I/O + 3stack-2ch-dig 3-jack with SPDIF I/O (ALC883) + alc883-6stack-dig 6-jack digital with SPDIF I/O (ALC883) 3stack-6ch 3-jack 6-channel 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O 6stack-dig-demo 6-jack digital for Intel demo board diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3a8e58c483d..6a899e8fdd0 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -208,12 +208,6 @@ enum { ALC885_MBP3, ALC885_MB5, ALC885_IMAC24, - ALC882_AUTO, - ALC882_MODEL_LAST, -}; - -/* ALC883 models */ -enum { ALC883_3ST_2ch_DIG, ALC883_3ST_6ch_DIG, ALC883_3ST_6ch, @@ -246,8 +240,8 @@ enum { ALC889A_MB31, ALC1200_ASUS_P5Q, ALC883_SONY_VAIO_TT, - ALC883_AUTO, - ALC883_MODEL_LAST, + ALC882_AUTO, + ALC882_MODEL_LAST, }; /* for GPIO Poll */ @@ -320,6 +314,8 @@ struct alc_spec { struct snd_array kctls; struct hda_input_mux private_imux[3]; hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS]; + hda_nid_t private_adc_nids[AUTO_CFG_MAX_OUTS]; + hda_nid_t private_capsrc_nids[AUTO_CFG_MAX_OUTS]; /* hooks */ void (*init_hook)(struct hda_codec *codec); @@ -6295,7 +6291,7 @@ static int patch_alc260(struct hda_codec *codec) /* - * ALC882 support + * ALC882/883/885/888/889 support * * ALC882 is almost identical with ALC880 but has cleaner and more flexible * configuration. Each pin widget can choose any input DACs and a mixer. @@ -6307,22 +6303,35 @@ static int patch_alc260(struct hda_codec *codec) */ #define ALC882_DIGOUT_NID 0x06 #define ALC882_DIGIN_NID 0x0a +#define ALC883_DIGOUT_NID ALC882_DIGOUT_NID +#define ALC883_DIGIN_NID ALC882_DIGIN_NID +#define ALC1200_DIGOUT_NID 0x10 + static struct hda_channel_mode alc882_ch_modes[1] = { { 8, NULL } }; +/* DACs */ static hda_nid_t alc882_dac_nids[4] = { /* front, rear, clfe, rear_surr */ 0x02, 0x03, 0x04, 0x05 }; +#define alc883_dac_nids alc882_dac_nids -/* identical with ALC880 */ +/* ADCs */ #define alc882_adc_nids alc880_adc_nids #define alc882_adc_nids_alt alc880_adc_nids_alt +#define alc883_adc_nids alc882_adc_nids_alt +static hda_nid_t alc883_adc_nids_alt[1] = { 0x08 }; +static hda_nid_t alc883_adc_nids_rev[2] = { 0x09, 0x08 }; +#define alc889_adc_nids alc880_adc_nids static hda_nid_t alc882_capsrc_nids[3] = { 0x24, 0x23, 0x22 }; static hda_nid_t alc882_capsrc_nids_alt[2] = { 0x23, 0x22 }; +#define alc883_capsrc_nids alc882_capsrc_nids_alt +static hda_nid_t alc883_capsrc_nids_rev[2] = { 0x22, 0x23 }; +#define alc889_capsrc_nids alc882_capsrc_nids /* input MUX */ /* FIXME: should be a matrix-type input source selection */ @@ -6337,6 +6346,8 @@ static struct hda_input_mux alc882_capture_source = { }, }; +#define alc883_capture_source alc882_capture_source + static struct hda_input_mux mb5_capture_source = { .num_items = 3, .items = { @@ -6346,6 +6357,77 @@ static struct hda_input_mux mb5_capture_source = { }, }; +static struct hda_input_mux alc883_3stack_6ch_intel = { + .num_items = 4, + .items = { + { "Mic", 0x1 }, + { "Front Mic", 0x0 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + }, +}; + +static struct hda_input_mux alc883_lenovo_101e_capture_source = { + .num_items = 2, + .items = { + { "Mic", 0x1 }, + { "Line", 0x2 }, + }, +}; + +static struct hda_input_mux alc883_lenovo_nb0763_capture_source = { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "iMic", 0x1 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + }, +}; + +static struct hda_input_mux alc883_fujitsu_pi2515_capture_source = { + .num_items = 2, + .items = { + { "Mic", 0x0 }, + { "Int Mic", 0x1 }, + }, +}; + +static struct hda_input_mux alc883_lenovo_sky_capture_source = { + .num_items = 3, + .items = { + { "Mic", 0x0 }, + { "Front Mic", 0x1 }, + { "Line", 0x4 }, + }, +}; + +static struct hda_input_mux alc883_asus_eee1601_capture_source = { + .num_items = 2, + .items = { + { "Mic", 0x0 }, + { "Line", 0x2 }, + }, +}; + +static struct hda_input_mux alc889A_mb31_capture_source = { + .num_items = 2, + .items = { + { "Mic", 0x0 }, + /* Front Mic (0x01) unused */ + { "Line", 0x2 }, + /* Line 2 (0x03) unused */ + /* CD (0x04) unsused? */ + }, +}; + +/* + * 2ch mode + */ +static struct hda_channel_mode alc883_3ST_2ch_modes[1] = { + { 2, NULL } +}; + /* * 2ch mode */ @@ -6357,6 +6439,18 @@ static struct hda_verb alc882_3ST_ch2_init[] = { { } /* end */ }; +/* + * 4ch mode + */ +static struct hda_verb alc882_3ST_ch4_init[] = { + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + /* * 6ch mode */ @@ -6370,11 +6464,14 @@ static struct hda_verb alc882_3ST_ch6_init[] = { { } /* end */ }; -static struct hda_channel_mode alc882_3ST_6ch_modes[2] = { +static struct hda_channel_mode alc882_3ST_6ch_modes[3] = { { 2, alc882_3ST_ch2_init }, + { 4, alc882_3ST_ch4_init }, { 6, alc882_3ST_ch6_init }, }; +#define alc883_3ST_6ch_modes alc882_3ST_6ch_modes + /* * 6ch mode */ @@ -6462,6 +6559,143 @@ static struct hda_channel_mode alc885_mb5_6ch_modes[2] = { { 6, alc885_mb5_ch6_init }, }; + +/* + * 2ch mode + */ +static struct hda_verb alc883_4ST_ch2_init[] = { + { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { } /* end */ +}; + +/* + * 4ch mode + */ +static struct hda_verb alc883_4ST_ch4_init[] = { + { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +/* + * 6ch mode + */ +static struct hda_verb alc883_4ST_ch6_init[] = { + { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +/* + * 8ch mode + */ +static struct hda_verb alc883_4ST_ch8_init[] = { + { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 }, + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +static struct hda_channel_mode alc883_4ST_8ch_modes[4] = { + { 2, alc883_4ST_ch2_init }, + { 4, alc883_4ST_ch4_init }, + { 6, alc883_4ST_ch6_init }, + { 8, alc883_4ST_ch8_init }, +}; + + +/* + * 2ch mode + */ +static struct hda_verb alc883_3ST_ch2_intel_init[] = { + { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { } /* end */ +}; + +/* + * 4ch mode + */ +static struct hda_verb alc883_3ST_ch4_intel_init[] = { + { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +/* + * 6ch mode + */ +static struct hda_verb alc883_3ST_ch6_intel_init[] = { + { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x19, AC_VERB_SET_CONNECT_SEL, 0x02 }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +static struct hda_channel_mode alc883_3ST_6ch_intel_modes[3] = { + { 2, alc883_3ST_ch2_intel_init }, + { 4, alc883_3ST_ch4_intel_init }, + { 6, alc883_3ST_ch6_intel_init }, +}; + +/* + * 6ch mode + */ +static struct hda_verb alc883_sixstack_ch6_init[] = { + { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 }, + { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { } /* end */ +}; + +/* + * 8ch mode + */ +static struct hda_verb alc883_sixstack_ch8_init[] = { + { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { } /* end */ +}; + +static struct hda_channel_mode alc883_sixstack_modes[2] = { + { 6, alc883_sixstack_ch6_init }, + { 8, alc883_sixstack_ch8_init }, +}; + + /* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17 * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b */ @@ -6597,7 +6831,7 @@ static struct snd_kcontrol_new alc882_chmode_mixer[] = { { } /* end */ }; -static struct hda_verb alc882_init_verbs[] = { +static struct hda_verb alc882_base_init_verbs[] = { /* Front mixer: unmute input/output amp left and right (volume = 0) */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, @@ -6649,11 +6883,6 @@ static struct hda_verb alc882_init_verbs[] = { /* FIXME: use matrix-type input source selection */ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ - /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */ - {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, - {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, - {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* Input mixer2 */ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, @@ -6664,9 +6893,6 @@ static struct hda_verb alc882_init_verbs[] = { {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, - /* ADC1: mute amp left and right */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, /* ADC2: mute amp left and right */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, @@ -6677,6 +6903,21 @@ static struct hda_verb alc882_init_verbs[] = { { } }; +static struct hda_verb alc882_adc1_init_verbs[] = { + /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */ + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + /* ADC1: mute amp left and right */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, + { } +}; + +/* HACK - expand to two elements */ +#define alc882_init_verbs alc882_base_init_verbs, alc882_adc1_init_verbs + static struct hda_verb alc882_eapd_verbs[] = { /* change to EAPD mode */ {0x20, AC_VERB_SET_COEF_INDEX, 0x07}, @@ -6684,6 +6925,8 @@ static struct hda_verb alc882_eapd_verbs[] = { { } }; +#define alc883_init_verbs alc882_base_init_verbs + /* Mac Pro test */ static struct snd_kcontrol_new alc882_macpro_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), @@ -7034,882 +7277,62 @@ static void alc885_imac24_init_hook(struct hda_codec *codec) /* * generic initialization of ADC, input mixers and output mixers */ -static struct hda_verb alc882_auto_init_verbs[] = { +static struct hda_verb alc883_auto_init_verbs[] = { /* * Unmute ADC0-2 and set the default input to mic-in */ - {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - - /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback - * mixer widget - * Note: PASD motherboards uses the Line In 2 as the input for - * front panel mic (mic 2) - */ - /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, - - /* - * Set up output mixers (0x0c - 0x0f) - */ - /* set vol=0 to output mixers */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* set up input amps for analog loopback */ - /* Amp Indices: DAC = 0, mixer = 1 */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - - /* FIXME: use matrix-type input source selection */ - /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ - /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */ - {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, - {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, - {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, - /* Input mixer2 */ - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, - /* Input mixer3 */ - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, - - { } -}; - -#ifdef CONFIG_SND_HDA_POWER_SAVE -#define alc882_loopbacks alc880_loopbacks -#endif - -/* pcm configuration: identical with ALC880 */ -#define alc882_pcm_analog_playback alc880_pcm_analog_playback -#define alc882_pcm_analog_capture alc880_pcm_analog_capture -#define alc882_pcm_digital_playback alc880_pcm_digital_playback -#define alc882_pcm_digital_capture alc880_pcm_digital_capture - -/* - * configuration and preset - */ -static const char *alc882_models[ALC882_MODEL_LAST] = { - [ALC882_3ST_DIG] = "3stack-dig", - [ALC882_6ST_DIG] = "6stack-dig", - [ALC882_ARIMA] = "arima", - [ALC882_W2JC] = "w2jc", - [ALC882_TARGA] = "targa", - [ALC882_ASUS_A7J] = "asus-a7j", - [ALC882_ASUS_A7M] = "asus-a7m", - [ALC885_MACPRO] = "macpro", - [ALC885_MB5] = "mb5", - [ALC885_MBP3] = "mbp3", - [ALC885_IMAC24] = "imac24", - [ALC882_AUTO] = "auto", -}; - -static struct snd_pci_quirk alc882_cfg_tbl[] = { - SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC882_6ST_DIG), - SND_PCI_QUIRK(0x1043, 0x060d, "Asus A7J", ALC882_ASUS_A7J), - SND_PCI_QUIRK(0x1043, 0x1243, "Asus A7J", ALC882_ASUS_A7J), - SND_PCI_QUIRK(0x1043, 0x13c2, "Asus A7M", ALC882_ASUS_A7M), - SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_W2JC), - SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG), - SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG), - SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG), - SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG), - SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8 */ - SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG), - SND_PCI_QUIRK(0x161f, 0x2054, "Arima W820", ALC882_ARIMA), - {} -}; - -static struct alc_config_preset alc882_presets[] = { - [ALC882_3ST_DIG] = { - .mixers = { alc882_base_mixer }, - .init_verbs = { alc882_init_verbs }, - .num_dacs = ARRAY_SIZE(alc882_dac_nids), - .dac_nids = alc882_dac_nids, - .dig_out_nid = ALC882_DIGOUT_NID, - .dig_in_nid = ALC882_DIGIN_NID, - .num_channel_mode = ARRAY_SIZE(alc882_ch_modes), - .channel_mode = alc882_ch_modes, - .need_dac_fix = 1, - .input_mux = &alc882_capture_source, - }, - [ALC882_6ST_DIG] = { - .mixers = { alc882_base_mixer, alc882_chmode_mixer }, - .init_verbs = { alc882_init_verbs }, - .num_dacs = ARRAY_SIZE(alc882_dac_nids), - .dac_nids = alc882_dac_nids, - .dig_out_nid = ALC882_DIGOUT_NID, - .dig_in_nid = ALC882_DIGIN_NID, - .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes), - .channel_mode = alc882_sixstack_modes, - .input_mux = &alc882_capture_source, - }, - [ALC882_ARIMA] = { - .mixers = { alc882_base_mixer, alc882_chmode_mixer }, - .init_verbs = { alc882_init_verbs, alc882_eapd_verbs }, - .num_dacs = ARRAY_SIZE(alc882_dac_nids), - .dac_nids = alc882_dac_nids, - .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes), - .channel_mode = alc882_sixstack_modes, - .input_mux = &alc882_capture_source, - }, - [ALC882_W2JC] = { - .mixers = { alc882_w2jc_mixer, alc882_chmode_mixer }, - .init_verbs = { alc882_init_verbs, alc882_eapd_verbs, - alc880_gpio1_init_verbs }, - .num_dacs = ARRAY_SIZE(alc882_dac_nids), - .dac_nids = alc882_dac_nids, - .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), - .channel_mode = alc880_threestack_modes, - .need_dac_fix = 1, - .input_mux = &alc882_capture_source, - .dig_out_nid = ALC882_DIGOUT_NID, - }, - [ALC885_MBP3] = { - .mixers = { alc885_mbp3_mixer, alc882_chmode_mixer }, - .init_verbs = { alc885_mbp3_init_verbs, - alc880_gpio1_init_verbs }, - .num_dacs = ARRAY_SIZE(alc882_dac_nids), - .dac_nids = alc882_dac_nids, - .channel_mode = alc885_mbp_6ch_modes, - .num_channel_mode = ARRAY_SIZE(alc885_mbp_6ch_modes), - .input_mux = &alc882_capture_source, - .dig_out_nid = ALC882_DIGOUT_NID, - .dig_in_nid = ALC882_DIGIN_NID, - .unsol_event = alc_automute_amp_unsol_event, - .init_hook = alc885_mbp3_init_hook, - }, - [ALC885_MB5] = { - .mixers = { alc885_mb5_mixer, alc882_chmode_mixer }, - .init_verbs = { alc885_mb5_init_verbs, - alc880_gpio1_init_verbs }, - .num_dacs = ARRAY_SIZE(alc882_dac_nids), - .dac_nids = alc882_dac_nids, - .channel_mode = alc885_mb5_6ch_modes, - .num_channel_mode = ARRAY_SIZE(alc885_mb5_6ch_modes), - .input_mux = &mb5_capture_source, - .dig_out_nid = ALC882_DIGOUT_NID, - .dig_in_nid = ALC882_DIGIN_NID, - }, - [ALC885_MACPRO] = { - .mixers = { alc882_macpro_mixer }, - .init_verbs = { alc882_macpro_init_verbs }, - .num_dacs = ARRAY_SIZE(alc882_dac_nids), - .dac_nids = alc882_dac_nids, - .dig_out_nid = ALC882_DIGOUT_NID, - .dig_in_nid = ALC882_DIGIN_NID, - .num_channel_mode = ARRAY_SIZE(alc882_ch_modes), - .channel_mode = alc882_ch_modes, - .input_mux = &alc882_capture_source, - .init_hook = alc885_macpro_init_hook, - }, - [ALC885_IMAC24] = { - .mixers = { alc885_imac24_mixer }, - .init_verbs = { alc885_imac24_init_verbs }, - .num_dacs = ARRAY_SIZE(alc882_dac_nids), - .dac_nids = alc882_dac_nids, - .dig_out_nid = ALC882_DIGOUT_NID, - .dig_in_nid = ALC882_DIGIN_NID, - .num_channel_mode = ARRAY_SIZE(alc882_ch_modes), - .channel_mode = alc882_ch_modes, - .input_mux = &alc882_capture_source, - .unsol_event = alc_automute_amp_unsol_event, - .init_hook = alc885_imac24_init_hook, - }, - [ALC882_TARGA] = { - .mixers = { alc882_targa_mixer, alc882_chmode_mixer }, - .init_verbs = { alc882_init_verbs, alc882_targa_verbs}, - .num_dacs = ARRAY_SIZE(alc882_dac_nids), - .dac_nids = alc882_dac_nids, - .dig_out_nid = ALC882_DIGOUT_NID, - .num_adc_nids = ARRAY_SIZE(alc882_adc_nids), - .adc_nids = alc882_adc_nids, - .capsrc_nids = alc882_capsrc_nids, - .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes), - .channel_mode = alc882_3ST_6ch_modes, - .need_dac_fix = 1, - .input_mux = &alc882_capture_source, - .unsol_event = alc882_targa_unsol_event, - .init_hook = alc882_targa_init_hook, - }, - [ALC882_ASUS_A7J] = { - .mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer }, - .init_verbs = { alc882_init_verbs, alc882_asus_a7j_verbs}, - .num_dacs = ARRAY_SIZE(alc882_dac_nids), - .dac_nids = alc882_dac_nids, - .dig_out_nid = ALC882_DIGOUT_NID, - .num_adc_nids = ARRAY_SIZE(alc882_adc_nids), - .adc_nids = alc882_adc_nids, - .capsrc_nids = alc882_capsrc_nids, - .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes), - .channel_mode = alc882_3ST_6ch_modes, - .need_dac_fix = 1, - .input_mux = &alc882_capture_source, - }, - [ALC882_ASUS_A7M] = { - .mixers = { alc882_asus_a7m_mixer, alc882_chmode_mixer }, - .init_verbs = { alc882_init_verbs, alc882_eapd_verbs, - alc880_gpio1_init_verbs, - alc882_asus_a7m_verbs }, - .num_dacs = ARRAY_SIZE(alc882_dac_nids), - .dac_nids = alc882_dac_nids, - .dig_out_nid = ALC882_DIGOUT_NID, - .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), - .channel_mode = alc880_threestack_modes, - .need_dac_fix = 1, - .input_mux = &alc882_capture_source, - }, -}; - - -/* - * Pin config fixes - */ -enum { - PINFIX_ABIT_AW9D_MAX -}; - -static struct alc_pincfg alc882_abit_aw9d_pinfix[] = { - { 0x15, 0x01080104 }, /* side */ - { 0x16, 0x01011012 }, /* rear */ - { 0x17, 0x01016011 }, /* clfe */ - { } -}; - -static const struct alc_pincfg *alc882_pin_fixes[] = { - [PINFIX_ABIT_AW9D_MAX] = alc882_abit_aw9d_pinfix, -}; - -static struct snd_pci_quirk alc882_pinfix_tbl[] = { - SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX), - {} -}; - -/* - * BIOS auto configuration - */ -static void alc882_auto_set_output_and_unmute(struct hda_codec *codec, - hda_nid_t nid, int pin_type, - int dac_idx) -{ - /* set as output */ - struct alc_spec *spec = codec->spec; - int idx; - - alc_set_pin_output(codec, nid, pin_type); - if (spec->multiout.dac_nids[dac_idx] == 0x25) - idx = 4; - else - idx = spec->multiout.dac_nids[dac_idx] - 2; - snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx); - -} - -static void alc882_auto_init_multi_out(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - int i; - - for (i = 0; i <= HDA_SIDE; i++) { - hda_nid_t nid = spec->autocfg.line_out_pins[i]; - int pin_type = get_pin_type(spec->autocfg.line_out_type); - if (nid) - alc882_auto_set_output_and_unmute(codec, nid, pin_type, - i); - } -} - -static void alc882_auto_init_hp_out(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - hda_nid_t pin; - - pin = spec->autocfg.hp_pins[0]; - if (pin) /* connect to front */ - /* use dac 0 */ - alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); - pin = spec->autocfg.speaker_pins[0]; - if (pin) - alc882_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0); -} - -#define alc882_is_input_pin(nid) alc880_is_input_pin(nid) -#define ALC882_PIN_CD_NID ALC880_PIN_CD_NID - -static void alc882_auto_init_analog_input(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - int i; - - for (i = 0; i < AUTO_PIN_LAST; i++) { - hda_nid_t nid = spec->autocfg.input_pins[i]; - if (!nid) - continue; - alc_set_input_pin(codec, nid, AUTO_PIN_FRONT_MIC /*i*/); - if (get_wcaps(codec, nid) & AC_WCAP_OUT_AMP) - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_AMP_GAIN_MUTE, - AMP_OUT_MUTE); - } -} - -static void alc882_auto_init_input_src(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - int c; - - for (c = 0; c < spec->num_adc_nids; c++) { - hda_nid_t conn_list[HDA_MAX_NUM_INPUTS]; - hda_nid_t nid = spec->capsrc_nids[c]; - unsigned int mux_idx; - const struct hda_input_mux *imux; - int conns, mute, idx, item; - - conns = snd_hda_get_connections(codec, nid, conn_list, - ARRAY_SIZE(conn_list)); - if (conns < 0) - continue; - mux_idx = c >= spec->num_mux_defs ? 0 : c; - imux = &spec->input_mux[mux_idx]; - for (idx = 0; idx < conns; idx++) { - /* if the current connection is the selected one, - * unmute it as default - otherwise mute it - */ - mute = AMP_IN_MUTE(idx); - for (item = 0; item < imux->num_items; item++) { - if (imux->items[item].index == idx) { - if (spec->cur_mux[c] == item) - mute = AMP_IN_UNMUTE(idx); - break; - } - } - /* check if we have a selector or mixer - * we could check for the widget type instead, but - * just check for Amp-In presence (in case of mixer - * without amp-in there is something wrong, this - * function shouldn't be used or capsrc nid is wrong) - */ - if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP) - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_AMP_GAIN_MUTE, - mute); - else if (mute != AMP_IN_MUTE(idx)) - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_CONNECT_SEL, - idx); - } - } -} - -/* add mic boosts if needed */ -static int alc_auto_add_mic_boost(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - int err; - hda_nid_t nid; - - nid = spec->autocfg.input_pins[AUTO_PIN_MIC]; - if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) { - err = add_control(spec, ALC_CTL_WIDGET_VOL, - "Mic Boost", - HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT)); - if (err < 0) - return err; - } - nid = spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC]; - if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) { - err = add_control(spec, ALC_CTL_WIDGET_VOL, - "Front Mic Boost", - HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT)); - if (err < 0) - return err; - } - return 0; -} - -/* almost identical with ALC880 parser... */ -static int alc882_parse_auto_config(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - int err = alc880_parse_auto_config(codec); - - if (err < 0) - return err; - else if (!err) - return 0; /* no config found */ - - err = alc_auto_add_mic_boost(codec); - if (err < 0) - return err; - - /* hack - override the init verbs */ - spec->init_verbs[0] = alc882_auto_init_verbs; - - return 1; /* config found */ -} - -/* additional initialization for auto-configuration model */ -static void alc882_auto_init(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - alc882_auto_init_multi_out(codec); - alc882_auto_init_hp_out(codec); - alc882_auto_init_analog_input(codec); - alc882_auto_init_input_src(codec); - if (spec->unsol_event) - alc_inithook(codec); -} - -static int patch_alc883(struct hda_codec *codec); /* called in patch_alc882() */ - -static int patch_alc882(struct hda_codec *codec) -{ - struct alc_spec *spec; - int err, board_config; - - spec = kzalloc(sizeof(*spec), GFP_KERNEL); - if (spec == NULL) - return -ENOMEM; - - codec->spec = spec; - - board_config = snd_hda_check_board_config(codec, ALC882_MODEL_LAST, - alc882_models, - alc882_cfg_tbl); - - if (board_config < 0 || board_config >= ALC882_MODEL_LAST) { - /* Pick up systems that don't supply PCI SSID */ - switch (codec->subsystem_id) { - case 0x106b0c00: /* Mac Pro */ - board_config = ALC885_MACPRO; - break; - case 0x106b1000: /* iMac 24 */ - case 0x106b2800: /* AppleTV */ - case 0x106b3e00: /* iMac 24 Aluminium */ - board_config = ALC885_IMAC24; - break; - case 0x106b00a0: /* MacBookPro3,1 - Another revision */ - case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */ - case 0x106b00a4: /* MacbookPro4,1 */ - case 0x106b2c00: /* Macbook Pro rev3 */ - /* Macbook 3.1 (0x106b3600) is handled by patch_alc883() */ - case 0x106b3800: /* MacbookPro4,1 - latter revision */ - board_config = ALC885_MBP3; - break; - case 0x106b3f00: /* Macbook 5,1 */ - case 0x106b4000: /* Macbook Pro 5,1 - FIXME: HP jack sense - * seems not working, so apparently - * no perfect solution yet - */ - board_config = ALC885_MB5; - break; - default: - /* ALC889A is handled better as ALC888-compatible */ - if (codec->revision_id == 0x100101 || - codec->revision_id == 0x100103) { - alc_free(codec); - return patch_alc883(codec); - } - printk(KERN_INFO "hda_codec: Unknown model for %s, " - "trying auto-probe from BIOS...\n", - codec->chip_name); - board_config = ALC882_AUTO; - } - } - - alc_fix_pincfg(codec, alc882_pinfix_tbl, alc882_pin_fixes); - - if (board_config == ALC882_AUTO) { - /* automatic parse from the BIOS config */ - err = alc882_parse_auto_config(codec); - if (err < 0) { - alc_free(codec); - return err; - } else if (!err) { - printk(KERN_INFO - "hda_codec: Cannot set up configuration " - "from BIOS. Using base mode...\n"); - board_config = ALC882_3ST_DIG; - } - } - - err = snd_hda_attach_beep_device(codec, 0x1); - if (err < 0) { - alc_free(codec); - return err; - } - - if (board_config != ALC882_AUTO) - setup_preset(spec, &alc882_presets[board_config]); - - spec->stream_analog_playback = &alc882_pcm_analog_playback; - spec->stream_analog_capture = &alc882_pcm_analog_capture; - /* FIXME: setup DAC5 */ - /*spec->stream_analog_alt_playback = &alc880_pcm_analog_alt_playback;*/ - spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture; - - spec->stream_digital_playback = &alc882_pcm_digital_playback; - spec->stream_digital_capture = &alc882_pcm_digital_capture; - - if (!spec->adc_nids && spec->input_mux) { - /* check whether NID 0x07 is valid */ - unsigned int wcap = get_wcaps(codec, 0x07); - /* get type */ - wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; - if (wcap != AC_WID_AUD_IN) { - spec->adc_nids = alc882_adc_nids_alt; - spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids_alt); - spec->capsrc_nids = alc882_capsrc_nids_alt; - } else { - spec->adc_nids = alc882_adc_nids; - spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids); - spec->capsrc_nids = alc882_capsrc_nids; - } - } - set_capture_mixer(spec); - set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT); - - spec->vmaster_nid = 0x0c; - - codec->patch_ops = alc_patch_ops; - if (board_config == ALC882_AUTO) - spec->init_hook = alc882_auto_init; -#ifdef CONFIG_SND_HDA_POWER_SAVE - if (!spec->loopback.amplist) - spec->loopback.amplist = alc882_loopbacks; -#endif - codec->proc_widget_hook = print_realtek_coef; - - return 0; -} - -/* - * ALC883 support - * - * ALC883 is almost identical with ALC880 but has cleaner and more flexible - * configuration. Each pin widget can choose any input DACs and a mixer. - * Each ADC is connected from a mixer of all inputs. This makes possible - * 6-channel independent captures. - * - * In addition, an independent DAC for the multi-playback (not used in this - * driver yet). - */ -#define ALC883_DIGOUT_NID 0x06 -#define ALC883_DIGIN_NID 0x0a - -#define ALC1200_DIGOUT_NID 0x10 - -static hda_nid_t alc883_dac_nids[4] = { - /* front, rear, clfe, rear_surr */ - 0x02, 0x03, 0x04, 0x05 -}; - -static hda_nid_t alc883_adc_nids[2] = { - /* ADC1-2 */ - 0x08, 0x09, -}; - -static hda_nid_t alc883_adc_nids_alt[1] = { - /* ADC1 */ - 0x08, -}; - -static hda_nid_t alc883_adc_nids_rev[2] = { - /* ADC2-1 */ - 0x09, 0x08 -}; - -#define alc889_adc_nids alc880_adc_nids - -static hda_nid_t alc883_capsrc_nids[2] = { 0x23, 0x22 }; - -static hda_nid_t alc883_capsrc_nids_rev[2] = { 0x22, 0x23 }; - -#define alc889_capsrc_nids alc882_capsrc_nids - -/* input MUX */ -/* FIXME: should be a matrix-type input source selection */ - -static struct hda_input_mux alc883_capture_source = { - .num_items = 4, - .items = { - { "Mic", 0x0 }, - { "Front Mic", 0x1 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - }, -}; - -static struct hda_input_mux alc883_3stack_6ch_intel = { - .num_items = 4, - .items = { - { "Mic", 0x1 }, - { "Front Mic", 0x0 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - }, -}; - -static struct hda_input_mux alc883_lenovo_101e_capture_source = { - .num_items = 2, - .items = { - { "Mic", 0x1 }, - { "Line", 0x2 }, - }, -}; - -static struct hda_input_mux alc883_lenovo_nb0763_capture_source = { - .num_items = 4, - .items = { - { "Mic", 0x0 }, - { "iMic", 0x1 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - }, -}; - -static struct hda_input_mux alc883_fujitsu_pi2515_capture_source = { - .num_items = 2, - .items = { - { "Mic", 0x0 }, - { "Int Mic", 0x1 }, - }, -}; - -static struct hda_input_mux alc883_lenovo_sky_capture_source = { - .num_items = 3, - .items = { - { "Mic", 0x0 }, - { "Front Mic", 0x1 }, - { "Line", 0x4 }, - }, -}; - -static struct hda_input_mux alc883_asus_eee1601_capture_source = { - .num_items = 2, - .items = { - { "Mic", 0x0 }, - { "Line", 0x2 }, - }, -}; - -static struct hda_input_mux alc889A_mb31_capture_source = { - .num_items = 2, - .items = { - { "Mic", 0x0 }, - /* Front Mic (0x01) unused */ - { "Line", 0x2 }, - /* Line 2 (0x03) unused */ - /* CD (0x04) unsused? */ - }, -}; - -/* - * 2ch mode - */ -static struct hda_channel_mode alc883_3ST_2ch_modes[1] = { - { 2, NULL } -}; - -/* - * 2ch mode - */ -static struct hda_verb alc883_3ST_ch2_init[] = { - { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, - { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, - { } /* end */ -}; - -/* - * 4ch mode - */ -static struct hda_verb alc883_3ST_ch4_init[] = { - { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, - { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, - { } /* end */ -}; - -/* - * 6ch mode - */ -static struct hda_verb alc883_3ST_ch6_init[] = { - { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 }, - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, - { } /* end */ -}; - -static struct hda_channel_mode alc883_3ST_6ch_modes[3] = { - { 2, alc883_3ST_ch2_init }, - { 4, alc883_3ST_ch4_init }, - { 6, alc883_3ST_ch6_init }, -}; - - -/* - * 2ch mode - */ -static struct hda_verb alc883_4ST_ch2_init[] = { - { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, - { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, - { } /* end */ -}; - -/* - * 4ch mode - */ -static struct hda_verb alc883_4ST_ch4_init[] = { - { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, - { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, - { } /* end */ -}; - -/* - * 6ch mode - */ -static struct hda_verb alc883_4ST_ch6_init[] = { - { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 }, - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, - { } /* end */ -}; - -/* - * 8ch mode - */ -static struct hda_verb alc883_4ST_ch8_init[] = { - { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 }, - { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 }, - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, - { } /* end */ -}; - -static struct hda_channel_mode alc883_4ST_8ch_modes[4] = { - { 2, alc883_4ST_ch2_init }, - { 4, alc883_4ST_ch4_init }, - { 6, alc883_4ST_ch6_init }, - { 8, alc883_4ST_ch8_init }, -}; - - -/* - * 2ch mode - */ -static struct hda_verb alc883_3ST_ch2_intel_init[] = { - { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, - { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, - { } /* end */ -}; - -/* - * 4ch mode - */ -static struct hda_verb alc883_3ST_ch4_intel_init[] = { - { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, - { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, - { } /* end */ -}; - -/* - * 6ch mode - */ -static struct hda_verb alc883_3ST_ch6_intel_init[] = { - { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x19, AC_VERB_SET_CONNECT_SEL, 0x02 }, - { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, - { } /* end */ -}; + {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, -static struct hda_channel_mode alc883_3ST_6ch_intel_modes[3] = { - { 2, alc883_3ST_ch2_intel_init }, - { 4, alc883_3ST_ch4_intel_init }, - { 6, alc883_3ST_ch6_intel_init }, -}; + /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback + * mixer widget + * Note: PASD motherboards uses the Line In 2 as the input for + * front panel mic (mic 2) + */ + /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */ + {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, -/* - * 6ch mode - */ -static struct hda_verb alc883_sixstack_ch6_init[] = { - { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 }, - { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { } /* end */ -}; + /* + * Set up output mixers (0x0c - 0x0f) + */ + /* set vol=0 to output mixers */ + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + /* set up input amps for analog loopback */ + /* Amp Indices: DAC = 0, mixer = 1 */ + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, -/* - * 8ch mode - */ -static struct hda_verb alc883_sixstack_ch8_init[] = { - { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, - { } /* end */ -}; + /* FIXME: use matrix-type input source selection */ + /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ + /* Input mixer2 */ + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, + /* Input mixer3 */ + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, -static struct hda_channel_mode alc883_sixstack_modes[2] = { - { 6, alc883_sixstack_ch6_init }, - { 8, alc883_sixstack_ch8_init }, + { } }; /* 2ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:front) */ @@ -7962,34 +7385,7 @@ static struct hda_verb alc883_medion_eapd_verbs[] = { { } }; -/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17 - * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b - */ - -static struct snd_kcontrol_new alc883_base_mixer[] = { - HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), - HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), - HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), - HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), - HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT), - HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), - HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), - { } /* end */ -}; +#define alc883_base_mixer alc882_base_mixer static struct snd_kcontrol_new alc883_mitac_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), @@ -8309,113 +7705,35 @@ static struct snd_kcontrol_new alc883_asus_eee1601_mixer[] = { HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - { } /* end */ -}; - -static struct snd_kcontrol_new alc883_asus_eee1601_cap_mixer[] = { - HDA_BIND_VOL("Capture Volume", &alc883_bind_cap_vol), - HDA_BIND_SW("Capture Switch", &alc883_bind_cap_switch), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - /* .name = "Capture Source", */ - .name = "Input Source", - .count = 1, - .info = alc_mux_enum_info, - .get = alc_mux_enum_get, - .put = alc_mux_enum_put, - }, - { } /* end */ -}; - -static struct snd_kcontrol_new alc883_chmode_mixer[] = { - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Channel Mode", - .info = alc_ch_mode_info, - .get = alc_ch_mode_get, - .put = alc_ch_mode_put, - }, - { } /* end */ -}; - -static struct hda_verb alc883_init_verbs[] = { - /* ADC1: mute amp left and right */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* ADC2: mute amp left and right */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* Front mixer: unmute input/output amp left and right (volume = 0) */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Rear mixer */ - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* CLFE mixer */ - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Side mixer */ - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - - /* mute analog input loopbacks */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + { } /* end */ +}; - /* Front Pin: output 0 (0x0c) */ - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* Rear Pin: output 1 (0x0d) */ - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, - /* CLFE Pin: output 2 (0x0e) */ - {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x16, AC_VERB_SET_CONNECT_SEL, 0x02}, - /* Side Pin: output 3 (0x0f) */ - {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, - /* Mic (rear) pin: input vref at 80% */ - {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - /* Front Mic pin: input vref at 80% */ - {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - /* Line In pin: input */ - {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - /* Line-2 In: Headphone output (output 0 - 0x0c) */ - {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* CD pin widget for input */ - {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, +static struct snd_kcontrol_new alc883_asus_eee1601_cap_mixer[] = { + HDA_BIND_VOL("Capture Volume", &alc883_bind_cap_vol), + HDA_BIND_SW("Capture Switch", &alc883_bind_cap_switch), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + /* .name = "Capture Source", */ + .name = "Input Source", + .count = 1, + .info = alc_mux_enum_info, + .get = alc_mux_enum_get, + .put = alc_mux_enum_put, + }, + { } /* end */ +}; - /* FIXME: use matrix-type input source selection */ - /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ - /* Input mixer2 */ - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, - /* Input mixer3 */ - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, - { } +static struct snd_kcontrol_new alc883_chmode_mixer[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Channel Mode", + .info = alc_ch_mode_info, + .get = alc_ch_mode_get, + .put = alc_ch_mode_put, + }, + { } /* end */ }; /* toggle speaker-output according to the hp-jack state */ @@ -8850,69 +8168,6 @@ static void alc883_vaiott_init_hook(struct hda_codec *codec) alc_automute_amp(codec); } -/* - * generic initialization of ADC, input mixers and output mixers - */ -static struct hda_verb alc883_auto_init_verbs[] = { - /* - * Unmute ADC0-2 and set the default input to mic-in - */ - {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - - /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback - * mixer widget - * Note: PASD motherboards uses the Line In 2 as the input for - * front panel mic (mic 2) - */ - /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */ - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, - {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, - - /* - * Set up output mixers (0x0c - 0x0f) - */ - /* set vol=0 to output mixers */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* set up input amps for analog loopback */ - /* Amp Indices: DAC = 0, mixer = 1 */ - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - - /* FIXME: use matrix-type input source selection */ - /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ - /* Input mixer1 */ - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, - /* {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, */ - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, - /* Input mixer2 */ - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, - /* {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, */ - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, - - { } -}; - static struct hda_verb alc888_asus_m90v_verbs[] = { {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, @@ -9023,25 +8278,44 @@ static void alc889A_mb31_unsol_event(struct hda_codec *codec, unsigned int res) alc889A_mb31_automute(codec); } + #ifdef CONFIG_SND_HDA_POWER_SAVE -#define alc883_loopbacks alc880_loopbacks +#define alc882_loopbacks alc880_loopbacks #endif /* pcm configuration: identical with ALC880 */ -#define alc883_pcm_analog_playback alc880_pcm_analog_playback -#define alc883_pcm_analog_capture alc880_pcm_analog_capture -#define alc883_pcm_analog_alt_capture alc880_pcm_analog_alt_capture -#define alc883_pcm_digital_playback alc880_pcm_digital_playback -#define alc883_pcm_digital_capture alc880_pcm_digital_capture +#define alc882_pcm_analog_playback alc880_pcm_analog_playback +#define alc882_pcm_analog_capture alc880_pcm_analog_capture +#define alc882_pcm_digital_playback alc880_pcm_digital_playback +#define alc882_pcm_digital_capture alc880_pcm_digital_capture + +static hda_nid_t alc883_slave_dig_outs[] = { + ALC1200_DIGOUT_NID, 0, +}; + +static hda_nid_t alc1200_slave_dig_outs[] = { + ALC883_DIGOUT_NID, 0, +}; /* * configuration and preset */ -static const char *alc883_models[ALC883_MODEL_LAST] = { - [ALC883_3ST_2ch_DIG] = "3stack-dig", +static const char *alc882_models[ALC882_MODEL_LAST] = { + [ALC882_3ST_DIG] = "3stack-dig", + [ALC882_6ST_DIG] = "6stack-dig", + [ALC882_ARIMA] = "arima", + [ALC882_W2JC] = "w2jc", + [ALC882_TARGA] = "targa", + [ALC882_ASUS_A7J] = "asus-a7j", + [ALC882_ASUS_A7M] = "asus-a7m", + [ALC885_MACPRO] = "macpro", + [ALC885_MB5] = "mb5", + [ALC885_MBP3] = "mbp3", + [ALC885_IMAC24] = "imac24", + [ALC883_3ST_2ch_DIG] = "3stack-2ch-dig", [ALC883_3ST_6ch_DIG] = "3stack-6ch-dig", [ALC883_3ST_6ch] = "3stack-6ch", - [ALC883_6ST_DIG] = "6stack-dig", + [ALC883_6ST_DIG] = "alc883-6stack-dig", [ALC883_TARGA_DIG] = "targa-dig", [ALC883_TARGA_2ch_DIG] = "targa-2ch-dig", [ALC883_TARGA_8ch_DIG] = "targa-8ch-dig", @@ -9068,11 +8342,12 @@ static const char *alc883_models[ALC883_MODEL_LAST] = { [ALC1200_ASUS_P5Q] = "asus-p5q", [ALC889A_MB31] = "mb31", [ALC883_SONY_VAIO_TT] = "sony-vaio-tt", - [ALC883_AUTO] = "auto", + [ALC882_AUTO] = "auto", }; -static struct snd_pci_quirk alc883_cfg_tbl[] = { - SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC883_3ST_6ch_DIG), +static struct snd_pci_quirk alc882_cfg_tbl[] = { + SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC882_6ST_DIG), + SND_PCI_QUIRK(0x1025, 0x006c, "Acer Aspire 9810", ALC883_ACER_ASPIRE), SND_PCI_QUIRK(0x1025, 0x0090, "Acer Aspire", ALC883_ACER_ASPIRE), SND_PCI_QUIRK(0x1025, 0x010a, "Acer Ferrari 5000", ALC883_ACER_ASPIRE), @@ -9087,8 +8362,8 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { ALC888_ACER_ASPIRE_8930G), SND_PCI_QUIRK(0x1025, 0x0146, "Acer Aspire 6935G", ALC888_ACER_ASPIRE_8930G), - SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO), - SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO), + SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC882_AUTO), + SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC882_AUTO), SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G", ALC888_ACER_ASPIRE_6530G), SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G", @@ -9097,30 +8372,44 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { * model=auto should work fine now */ /* SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER), */ + SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL), + SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG), SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP), SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP), SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG), SND_PCI_QUIRK(0x103c, 0x2a66, "HP Acacia", ALC888_3ST_HP), SND_PCI_QUIRK(0x103c, 0x2a72, "HP Educ.ar", ALC888_3ST_HP), + + SND_PCI_QUIRK(0x1043, 0x060d, "Asus A7J", ALC882_ASUS_A7J), + SND_PCI_QUIRK(0x1043, 0x1243, "Asus A7J", ALC882_ASUS_A7J), + SND_PCI_QUIRK(0x1043, 0x13c2, "Asus A7M", ALC882_ASUS_A7M), SND_PCI_QUIRK(0x1043, 0x1873, "Asus M90V", ALC888_ASUS_M90V), + SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_W2JC), + SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG), + SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG), SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG), SND_PCI_QUIRK(0x1043, 0x8284, "Asus Z37E", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1043, 0x82fe, "Asus P5Q-EM HDMI", ALC1200_ASUS_P5Q), SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601), + + SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC883_SONY_VAIO_TT), SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG), - SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG), + SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG), SND_PCI_QUIRK(0x1071, 0x8227, "Mitac 82801H", ALC883_MITAC), SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC), SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL), SND_PCI_QUIRK(0x108e, 0x534d, NULL, ALC883_3ST_6ch), - SND_PCI_QUIRK(0x1458, 0xa002, "MSI", ALC883_6ST_DIG), + SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG), + SND_PCI_QUIRK(0x1462, 0x0349, "MSI", ALC883_TARGA_2ch_DIG), SND_PCI_QUIRK(0x1462, 0x040d, "MSI", ALC883_TARGA_2ch_DIG), SND_PCI_QUIRK(0x1462, 0x0579, "MSI", ALC883_TARGA_2ch_DIG), + SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8 */ SND_PCI_QUIRK(0x1462, 0x2fb3, "MSI", ALC883_TARGA_2ch_DIG), + SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG), SND_PCI_QUIRK(0x1462, 0x3729, "MSI S420", ALC883_TARGA_DIG), SND_PCI_QUIRK(0x1462, 0x3783, "NEC S970", ALC883_TARGA_DIG), SND_PCI_QUIRK(0x1462, 0x3b7f, "MSI", ALC883_TARGA_2ch_DIG), @@ -9142,11 +8431,13 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x1462, 0x7327, "MSI", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1462, 0x7350, "MSI", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1462, 0xa422, "MSI", ALC883_TARGA_2ch_DIG), + SND_PCI_QUIRK(0x147b, 0x1083, "Abit IP35-PRO", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1558, 0x0721, "Clevo laptop M720R", ALC883_CLEVO_M720), SND_PCI_QUIRK(0x1558, 0x0722, "Clevo laptop M720SR", ALC883_CLEVO_M720), SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch), + /* SND_PCI_QUIRK(0x161f, 0x2054, "Arima W820", ALC882_ARIMA), */ SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION), SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1100, "FSC AMILO Xi/Pi25xx", ALC883_FUJITSU_PI2515), @@ -9161,24 +8452,175 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x17c0, 0x4085, "MEDION MD96630", ALC888_LENOVO_MS7195_DIG), SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66), + SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL), SND_PCI_QUIRK(0x8086, 0x0002, "DG33FBC", ALC883_3ST_6ch_INTEL), SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC), SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL), SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch), - SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC883_SONY_VAIO_TT), - {} -}; -static hda_nid_t alc883_slave_dig_outs[] = { - ALC1200_DIGOUT_NID, 0, + {} }; -static hda_nid_t alc1200_slave_dig_outs[] = { - ALC883_DIGOUT_NID, 0, +/* codec SSID table for Intel Mac */ +static struct snd_pci_quirk alc882_ssid_cfg_tbl[] = { + SND_PCI_QUIRK(0x106b, 0x00a0, "MacBookPro 3,1", ALC885_MBP3), + SND_PCI_QUIRK(0x106b, 0x00a1, "Macbook", ALC885_MBP3), + SND_PCI_QUIRK(0x106b, 0x00a4, "MacbookPro 4,1", ALC885_MBP3), + SND_PCI_QUIRK(0x106b, 0x0c00, "Mac Pro", ALC885_MACPRO), + SND_PCI_QUIRK(0x106b, 0x1000, "iMac 24", ALC885_IMAC24), + SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_IMAC24), + SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC885_MBP3), + SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31), + SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3), + SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24), + SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5), + /* FIXME: HP jack sense seems not working for MBP 5,1, so apparently + * no perfect solution yet + */ + SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5), + {} /* terminator */ }; -static struct alc_config_preset alc883_presets[] = { +static struct alc_config_preset alc882_presets[] = { + [ALC882_3ST_DIG] = { + .mixers = { alc882_base_mixer }, + .init_verbs = { alc882_init_verbs }, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .dig_out_nid = ALC882_DIGOUT_NID, + .dig_in_nid = ALC882_DIGIN_NID, + .num_channel_mode = ARRAY_SIZE(alc882_ch_modes), + .channel_mode = alc882_ch_modes, + .need_dac_fix = 1, + .input_mux = &alc882_capture_source, + }, + [ALC882_6ST_DIG] = { + .mixers = { alc882_base_mixer, alc882_chmode_mixer }, + .init_verbs = { alc882_init_verbs }, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .dig_out_nid = ALC882_DIGOUT_NID, + .dig_in_nid = ALC882_DIGIN_NID, + .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes), + .channel_mode = alc882_sixstack_modes, + .input_mux = &alc882_capture_source, + }, + [ALC882_ARIMA] = { + .mixers = { alc882_base_mixer, alc882_chmode_mixer }, + .init_verbs = { alc882_init_verbs, alc882_eapd_verbs }, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes), + .channel_mode = alc882_sixstack_modes, + .input_mux = &alc882_capture_source, + }, + [ALC882_W2JC] = { + .mixers = { alc882_w2jc_mixer, alc882_chmode_mixer }, + .init_verbs = { alc882_init_verbs, alc882_eapd_verbs, + alc880_gpio1_init_verbs }, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), + .channel_mode = alc880_threestack_modes, + .need_dac_fix = 1, + .input_mux = &alc882_capture_source, + .dig_out_nid = ALC882_DIGOUT_NID, + }, + [ALC885_MBP3] = { + .mixers = { alc885_mbp3_mixer, alc882_chmode_mixer }, + .init_verbs = { alc885_mbp3_init_verbs, + alc880_gpio1_init_verbs }, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .channel_mode = alc885_mbp_6ch_modes, + .num_channel_mode = ARRAY_SIZE(alc885_mbp_6ch_modes), + .input_mux = &alc882_capture_source, + .dig_out_nid = ALC882_DIGOUT_NID, + .dig_in_nid = ALC882_DIGIN_NID, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc885_mbp3_init_hook, + }, + [ALC885_MB5] = { + .mixers = { alc885_mb5_mixer, alc882_chmode_mixer }, + .init_verbs = { alc885_mb5_init_verbs, + alc880_gpio1_init_verbs }, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .channel_mode = alc885_mb5_6ch_modes, + .num_channel_mode = ARRAY_SIZE(alc885_mb5_6ch_modes), + .input_mux = &mb5_capture_source, + .dig_out_nid = ALC882_DIGOUT_NID, + .dig_in_nid = ALC882_DIGIN_NID, + }, + [ALC885_MACPRO] = { + .mixers = { alc882_macpro_mixer }, + .init_verbs = { alc882_macpro_init_verbs }, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .dig_out_nid = ALC882_DIGOUT_NID, + .dig_in_nid = ALC882_DIGIN_NID, + .num_channel_mode = ARRAY_SIZE(alc882_ch_modes), + .channel_mode = alc882_ch_modes, + .input_mux = &alc882_capture_source, + .init_hook = alc885_macpro_init_hook, + }, + [ALC885_IMAC24] = { + .mixers = { alc885_imac24_mixer }, + .init_verbs = { alc885_imac24_init_verbs }, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .dig_out_nid = ALC882_DIGOUT_NID, + .dig_in_nid = ALC882_DIGIN_NID, + .num_channel_mode = ARRAY_SIZE(alc882_ch_modes), + .channel_mode = alc882_ch_modes, + .input_mux = &alc882_capture_source, + .unsol_event = alc_automute_amp_unsol_event, + .init_hook = alc885_imac24_init_hook, + }, + [ALC882_TARGA] = { + .mixers = { alc882_targa_mixer, alc882_chmode_mixer }, + .init_verbs = { alc882_init_verbs, alc882_targa_verbs}, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .dig_out_nid = ALC882_DIGOUT_NID, + .num_adc_nids = ARRAY_SIZE(alc882_adc_nids), + .adc_nids = alc882_adc_nids, + .capsrc_nids = alc882_capsrc_nids, + .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes), + .channel_mode = alc882_3ST_6ch_modes, + .need_dac_fix = 1, + .input_mux = &alc882_capture_source, + .unsol_event = alc882_targa_unsol_event, + .init_hook = alc882_targa_init_hook, + }, + [ALC882_ASUS_A7J] = { + .mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer }, + .init_verbs = { alc882_init_verbs, alc882_asus_a7j_verbs}, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .dig_out_nid = ALC882_DIGOUT_NID, + .num_adc_nids = ARRAY_SIZE(alc882_adc_nids), + .adc_nids = alc882_adc_nids, + .capsrc_nids = alc882_capsrc_nids, + .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes), + .channel_mode = alc882_3ST_6ch_modes, + .need_dac_fix = 1, + .input_mux = &alc882_capture_source, + }, + [ALC882_ASUS_A7M] = { + .mixers = { alc882_asus_a7m_mixer, alc882_chmode_mixer }, + .init_verbs = { alc882_init_verbs, alc882_eapd_verbs, + alc880_gpio1_init_verbs, + alc882_asus_a7m_verbs }, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .dig_out_nid = ALC882_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), + .channel_mode = alc880_threestack_modes, + .need_dac_fix = 1, + .input_mux = &alc882_capture_source, + }, [ALC883_3ST_2ch_DIG] = { .mixers = { alc883_3ST_2ch_mixer }, .init_verbs = { alc883_init_verbs }, @@ -9612,10 +9054,33 @@ static struct alc_config_preset alc883_presets[] = { }; +/* + * Pin config fixes + */ +enum { + PINFIX_ABIT_AW9D_MAX +}; + +static struct alc_pincfg alc882_abit_aw9d_pinfix[] = { + { 0x15, 0x01080104 }, /* side */ + { 0x16, 0x01011012 }, /* rear */ + { 0x17, 0x01016011 }, /* clfe */ + { } +}; + +static const struct alc_pincfg *alc882_pin_fixes[] = { + [PINFIX_ABIT_AW9D_MAX] = alc882_abit_aw9d_pinfix, +}; + +static struct snd_pci_quirk alc882_pinfix_tbl[] = { + SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX), + {} +}; + /* * BIOS auto configuration */ -static void alc883_auto_set_output_and_unmute(struct hda_codec *codec, +static void alc882_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type, int dac_idx) { @@ -9632,7 +9097,7 @@ static void alc883_auto_set_output_and_unmute(struct hda_codec *codec, } -static void alc883_auto_init_multi_out(struct hda_codec *codec) +static void alc882_auto_init_multi_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; @@ -9641,12 +9106,12 @@ static void alc883_auto_init_multi_out(struct hda_codec *codec) hda_nid_t nid = spec->autocfg.line_out_pins[i]; int pin_type = get_pin_type(spec->autocfg.line_out_type); if (nid) - alc883_auto_set_output_and_unmute(codec, nid, pin_type, + alc882_auto_set_output_and_unmute(codec, nid, pin_type, i); } } -static void alc883_auto_init_hp_out(struct hda_codec *codec) +static void alc882_auto_init_hp_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; hda_nid_t pin; @@ -9654,42 +9119,114 @@ static void alc883_auto_init_hp_out(struct hda_codec *codec) pin = spec->autocfg.hp_pins[0]; if (pin) /* connect to front */ /* use dac 0 */ - alc883_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); + alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); pin = spec->autocfg.speaker_pins[0]; if (pin) - alc883_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0); + alc882_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0); } -#define alc883_is_input_pin(nid) alc880_is_input_pin(nid) -#define ALC883_PIN_CD_NID ALC880_PIN_CD_NID +#define alc882_is_input_pin(nid) alc880_is_input_pin(nid) +#define ALC882_PIN_CD_NID ALC880_PIN_CD_NID -static void alc883_auto_init_analog_input(struct hda_codec *codec) +static void alc882_auto_init_analog_input(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; - if (alc883_is_input_pin(nid)) { - alc_set_input_pin(codec, nid, i); - if (nid != ALC883_PIN_CD_NID && - (get_wcaps(codec, nid) & AC_WCAP_OUT_AMP)) + if (!nid) + continue; + alc_set_input_pin(codec, nid, AUTO_PIN_FRONT_MIC /*i*/); + if (get_wcaps(codec, nid) & AC_WCAP_OUT_AMP) + snd_hda_codec_write(codec, nid, 0, + AC_VERB_SET_AMP_GAIN_MUTE, + AMP_OUT_MUTE); + } +} + +static void alc882_auto_init_input_src(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + int c; + + for (c = 0; c < spec->num_adc_nids; c++) { + hda_nid_t conn_list[HDA_MAX_NUM_INPUTS]; + hda_nid_t nid = spec->capsrc_nids[c]; + unsigned int mux_idx; + const struct hda_input_mux *imux; + int conns, mute, idx, item; + + conns = snd_hda_get_connections(codec, nid, conn_list, + ARRAY_SIZE(conn_list)); + if (conns < 0) + continue; + mux_idx = c >= spec->num_mux_defs ? 0 : c; + imux = &spec->input_mux[mux_idx]; + for (idx = 0; idx < conns; idx++) { + /* if the current connection is the selected one, + * unmute it as default - otherwise mute it + */ + mute = AMP_IN_MUTE(idx); + for (item = 0; item < imux->num_items; item++) { + if (imux->items[item].index == idx) { + if (spec->cur_mux[c] == item) + mute = AMP_IN_UNMUTE(idx); + break; + } + } + /* check if we have a selector or mixer + * we could check for the widget type instead, but + * just check for Amp-In presence (in case of mixer + * without amp-in there is something wrong, this + * function shouldn't be used or capsrc nid is wrong) + */ + if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP) snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, - AMP_OUT_MUTE); + mute); + else if (mute != AMP_IN_MUTE(idx)) + snd_hda_codec_write(codec, nid, 0, + AC_VERB_SET_CONNECT_SEL, + idx); } } } -#define alc883_auto_init_input_src alc882_auto_init_input_src +/* add mic boosts if needed */ +static int alc_auto_add_mic_boost(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + int err; + hda_nid_t nid; + + nid = spec->autocfg.input_pins[AUTO_PIN_MIC]; + if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) { + err = add_control(spec, ALC_CTL_WIDGET_VOL, + "Mic Boost", + HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT)); + if (err < 0) + return err; + } + nid = spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC]; + if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) { + err = add_control(spec, ALC_CTL_WIDGET_VOL, + "Front Mic Boost", + HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT)); + if (err < 0) + return err; + } + return 0; +} /* almost identical with ALC880 parser... */ -static int alc883_parse_auto_config(struct hda_codec *codec) +static int alc882_parse_auto_config(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - int err = alc880_parse_auto_config(codec); - struct auto_pin_cfg *cfg = &spec->autocfg; + struct auto_pin_cfg *autocfg = &spec->autocfg; + unsigned int wcap; int i; + int err = alc880_parse_auto_config(codec); if (err < 0) return err; @@ -9702,43 +9239,45 @@ static int alc883_parse_auto_config(struct hda_codec *codec) /* hack - override the init verbs */ spec->init_verbs[0] = alc883_auto_init_verbs; + /* if ADC 0x07 is available, initialize it, too */ + wcap = get_wcaps(codec, 0x07); + wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; + if (wcap == AC_WID_AUD_IN) + add_verb(spec, alc882_adc1_init_verbs); - /* setup input_mux for ALC889 */ - if (codec->vendor_id == 0x10ec0889) { - /* digital-mic input pin is excluded in alc880_auto_create..() - * because it's under 0x18 - */ - if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 || - cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) { - struct hda_input_mux *imux = &spec->private_imux[0]; - for (i = 1; i < 3; i++) - memcpy(&spec->private_imux[i], - &spec->private_imux[0], - sizeof(spec->private_imux[0])); - imux->items[imux->num_items].label = "Int DMic"; - imux->items[imux->num_items].index = 0x0b; - imux->num_items++; - spec->num_mux_defs = 3; - spec->input_mux = spec->private_imux; - } + /* digital-mic input pin is excluded in alc880_auto_create..() + * because it's under 0x18 + */ + if (autocfg->input_pins[AUTO_PIN_MIC] == 0x12 || + autocfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) { + struct hda_input_mux *imux = &spec->private_imux[0]; + for (i = 1; i < 3; i++) + memcpy(&spec->private_imux[i], + &spec->private_imux[0], + sizeof(spec->private_imux[0])); + imux->items[imux->num_items].label = "Int DMic"; + imux->items[imux->num_items].index = 0x0b; + imux->num_items++; + spec->num_mux_defs = 3; + spec->input_mux = spec->private_imux; } return 1; /* config found */ } /* additional initialization for auto-configuration model */ -static void alc883_auto_init(struct hda_codec *codec) +static void alc882_auto_init(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - alc883_auto_init_multi_out(codec); - alc883_auto_init_hp_out(codec); - alc883_auto_init_analog_input(codec); - alc883_auto_init_input_src(codec); + alc882_auto_init_multi_out(codec); + alc882_auto_init_hp_out(codec); + alc882_auto_init_analog_input(codec); + alc882_auto_init_input_src(codec); if (spec->unsol_event) alc_inithook(codec); } -static int patch_alc883(struct hda_codec *codec) +static int patch_alc882(struct hda_codec *codec) { struct alc_spec *spec; int err, board_config; @@ -9749,28 +9288,36 @@ static int patch_alc883(struct hda_codec *codec) codec->spec = spec; - alc_fix_pll_init(codec, 0x20, 0x0a, 10); + switch (codec->vendor_id) { + case 0x10ec0882: + case 0x10ec0885: + break; + default: + /* ALC883 and variants */ + alc_fix_pll_init(codec, 0x20, 0x0a, 10); + break; + } - board_config = snd_hda_check_board_config(codec, ALC883_MODEL_LAST, - alc883_models, - alc883_cfg_tbl); - if (board_config < 0 || board_config >= ALC883_MODEL_LAST) { - /* Pick up systems that don't supply PCI SSID */ - switch (codec->subsystem_id) { - case 0x106b3600: /* Macbook 3.1 */ - board_config = ALC889A_MB31; - break; - default: - printk(KERN_INFO - "hda_codec: Unknown model for %s, trying " - "auto-probe from BIOS...\n", codec->chip_name); - board_config = ALC883_AUTO; - } + board_config = snd_hda_check_board_config(codec, ALC882_MODEL_LAST, + alc882_models, + alc882_cfg_tbl); + + if (board_config < 0 || board_config >= ALC882_MODEL_LAST) + board_config = snd_hda_check_board_codec_sid_config(codec, + ALC882_MODEL_LAST, alc882_models, alc882_ssid_cfg_tbl); + + if (board_config < 0 || board_config >= ALC882_MODEL_LAST) { + printk(KERN_INFO "hda_codec: Unknown model for %s, " + "trying auto-probe from BIOS...\n", + codec->chip_name); + board_config = ALC882_AUTO; } - if (board_config == ALC883_AUTO) { + alc_fix_pincfg(codec, alc882_pinfix_tbl, alc882_pin_fixes); + + if (board_config == ALC882_AUTO) { /* automatic parse from the BIOS config */ - err = alc883_parse_auto_config(codec); + err = alc882_parse_auto_config(codec); if (err < 0) { alc_free(codec); return err; @@ -9778,7 +9325,7 @@ static int patch_alc883(struct hda_codec *codec) printk(KERN_INFO "hda_codec: Cannot set up configuration " "from BIOS. Using base mode...\n"); - board_config = ALC883_3ST_2ch_DIG; + board_config = ALC882_3ST_DIG; } } @@ -9788,63 +9335,61 @@ static int patch_alc883(struct hda_codec *codec) return err; } - if (board_config != ALC883_AUTO) - setup_preset(spec, &alc883_presets[board_config]); + if (board_config != ALC882_AUTO) + setup_preset(spec, &alc882_presets[board_config]); - switch (codec->vendor_id) { - case 0x10ec0888: - if (!spec->num_adc_nids) { - spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids); - spec->adc_nids = alc883_adc_nids; - } - if (!spec->capsrc_nids) - spec->capsrc_nids = alc883_capsrc_nids; + spec->stream_analog_playback = &alc882_pcm_analog_playback; + spec->stream_analog_capture = &alc882_pcm_analog_capture; + /* FIXME: setup DAC5 */ + /*spec->stream_analog_alt_playback = &alc880_pcm_analog_alt_playback;*/ + spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture; + + spec->stream_digital_playback = &alc882_pcm_digital_playback; + spec->stream_digital_capture = &alc882_pcm_digital_capture; + + if (codec->vendor_id == 0x10ec0888) spec->init_amp = ALC_INIT_DEFAULT; /* always initialize */ - break; - case 0x10ec0889: - if (!spec->num_adc_nids) { - spec->num_adc_nids = ARRAY_SIZE(alc889_adc_nids); - spec->adc_nids = alc889_adc_nids; - } - if (!spec->capsrc_nids) - spec->capsrc_nids = alc889_capsrc_nids; - break; - default: - if (!spec->num_adc_nids) { - spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids); - spec->adc_nids = alc883_adc_nids; + + if (!spec->adc_nids && spec->input_mux) { + int i; + spec->num_adc_nids = 0; + for (i = 0; i < ARRAY_SIZE(alc882_adc_nids); i++) { + hda_nid_t cap; + hda_nid_t nid = alc882_adc_nids[i]; + unsigned int wcap = get_wcaps(codec, nid); + /* get type */ + wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; + if (wcap != AC_WID_AUD_IN) + continue; + spec->private_adc_nids[spec->num_adc_nids] = nid; + err = snd_hda_get_connections(codec, nid, &cap, 1); + if (err < 0) + continue; + spec->private_capsrc_nids[spec->num_adc_nids] = cap; + spec->num_adc_nids++; } - if (!spec->capsrc_nids) - spec->capsrc_nids = alc883_capsrc_nids; - break; + spec->adc_nids = spec->private_adc_nids; + spec->capsrc_nids = spec->private_capsrc_nids; } - spec->stream_analog_playback = &alc883_pcm_analog_playback; - spec->stream_analog_capture = &alc883_pcm_analog_capture; - spec->stream_analog_alt_capture = &alc883_pcm_analog_alt_capture; - - spec->stream_digital_playback = &alc883_pcm_digital_playback; - spec->stream_digital_capture = &alc883_pcm_digital_capture; - - if (!spec->cap_mixer) - set_capture_mixer(spec); + set_capture_mixer(spec); set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT); spec->vmaster_nid = 0x0c; codec->patch_ops = alc_patch_ops; - if (board_config == ALC883_AUTO) - spec->init_hook = alc883_auto_init; - + if (board_config == ALC882_AUTO) + spec->init_hook = alc882_auto_init; #ifdef CONFIG_SND_HDA_POWER_SAVE if (!spec->loopback.amplist) - spec->loopback.amplist = alc883_loopbacks; + spec->loopback.amplist = alc882_loopbacks; #endif codec->proc_widget_hook = print_realtek_coef; return 0; } + /* * ALC262 support */ @@ -17546,23 +17091,23 @@ static struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0861, .name = "ALC861", .patch = patch_alc861 }, { .id = 0x10ec0862, .name = "ALC861-VD", .patch = patch_alc861vd }, { .id = 0x10ec0662, .rev = 0x100002, .name = "ALC662 rev2", - .patch = patch_alc883 }, + .patch = patch_alc882 }, { .id = 0x10ec0662, .rev = 0x100101, .name = "ALC662 rev1", .patch = patch_alc662 }, { .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 }, { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 }, { .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 }, - { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc883 }, + { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc882 }, { .id = 0x10ec0885, .rev = 0x100101, .name = "ALC889A", - .patch = patch_alc882 }, /* should be patch_alc883() in future */ + .patch = patch_alc882 }, { .id = 0x10ec0885, .rev = 0x100103, .name = "ALC889A", - .patch = patch_alc882 }, /* should be patch_alc883() in future */ + .patch = patch_alc882 }, { .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 }, - { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc883 }, + { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc882 }, { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200", - .patch = patch_alc883 }, - { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, - { .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc883 }, + .patch = patch_alc882 }, + { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc882 }, + { .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc882 }, {} /* terminator */ }; -- cgit v1.2.3-70-g09d2 From b294a290d24d1196d68399cc3a9b8c50bfb55abd Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 30 Jun 2009 02:13:01 -0400 Subject: Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL" This reverts commit 8efe444038a205e79b38b7ad03878824901849a8 and 4cbc76eadf56399cd11fb736b33c53aec9caab8c. Richard@laptop.org was apparently using CAPACITY_LEVEL for debugging battery/EC problems, and was upset that it was removed. This readds it. Conflicts: Documentation/power_supply_class.txt Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- Documentation/power/power_supply_class.txt | 2 ++ drivers/power/olpc_battery.c | 9 +++++++++ drivers/power/power_supply_sysfs.c | 6 ++++++ include/linux/power_supply.h | 10 ++++++++++ 4 files changed, 27 insertions(+) (limited to 'Documentation') diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index c6cd4956047..709d95571d7 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -108,6 +108,8 @@ relative, time-based measurements. ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. CAPACITY - capacity in percents. +CAPACITY_LEVEL - capacity level. This corresponds to +POWER_SUPPLY_CAPACITY_LEVEL_*. TEMP - temperature of the power supply. TEMP_AMBIENT - ambient temperature. diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 58e419299cd..3a589df0937 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -276,6 +276,14 @@ static int olpc_bat_get_property(struct power_supply *psy, return ret; val->intval = ec_byte; break; + case POWER_SUPPLY_PROP_CAPACITY_LEVEL: + if (ec_byte & BAT_STAT_FULL) + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL; + else if (ec_byte & BAT_STAT_LOW) + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW; + else + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; + break; case POWER_SUPPLY_PROP_TEMP: ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2); if (ret) @@ -321,6 +329,7 @@ static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_VOLTAGE_AVG, POWER_SUPPLY_PROP_CURRENT_AVG, POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_MANUFACTURER, diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index da73591017f..9deabbde6fd 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -51,6 +51,9 @@ static ssize_t power_supply_show_property(struct device *dev, "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd", "LiMn" }; + static char *capacity_level_text[] = { + "Unknown", "Critical", "Low", "Normal", "High", "Full" + }; ssize_t ret; struct power_supply *psy = dev_get_drvdata(dev); const ptrdiff_t off = attr - power_supply_attrs; @@ -71,6 +74,8 @@ static ssize_t power_supply_show_property(struct device *dev, return sprintf(buf, "%s\n", health_text[value.intval]); else if (off == POWER_SUPPLY_PROP_TECHNOLOGY) return sprintf(buf, "%s\n", technology_text[value.intval]); + else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL) + return sprintf(buf, "%s\n", capacity_level_text[value.intval]); else if (off >= POWER_SUPPLY_PROP_MODEL_NAME) return sprintf(buf, "%s\n", value.strval); @@ -109,6 +114,7 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(energy_now), POWER_SUPPLY_ATTR(energy_avg), POWER_SUPPLY_ATTR(capacity), + POWER_SUPPLY_ATTR(capacity_level), POWER_SUPPLY_ATTR(temp), POWER_SUPPLY_ATTR(temp_ambient), POWER_SUPPLY_ATTR(time_to_empty_now), diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 594c494ac3f..0ab6aa17124 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -58,6 +58,15 @@ enum { POWER_SUPPLY_TECHNOLOGY_LiMn, }; +enum { + POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0, + POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL, + POWER_SUPPLY_CAPACITY_LEVEL_LOW, + POWER_SUPPLY_CAPACITY_LEVEL_NORMAL, + POWER_SUPPLY_CAPACITY_LEVEL_HIGH, + POWER_SUPPLY_CAPACITY_LEVEL_FULL, +}; + enum power_supply_property { /* Properties of type `int' */ POWER_SUPPLY_PROP_STATUS = 0, @@ -89,6 +98,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_ENERGY_NOW, POWER_SUPPLY_PROP_ENERGY_AVG, POWER_SUPPLY_PROP_CAPACITY, /* in percents! */ + POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, -- cgit v1.2.3-70-g09d2 From e3c6c4a8af9e3c4588235444774e66b6483b10ad Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Wed, 1 Jul 2009 22:36:22 +0200 Subject: kmemcheck: update documentation The download instructions are no longer needed since kmemcheck was included in mainline. Signed-off-by: Vegard Nossum --- Documentation/kmemcheck.txt | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt index 363044609da..c28f82895d6 100644 --- a/Documentation/kmemcheck.txt +++ b/Documentation/kmemcheck.txt @@ -43,26 +43,7 @@ feature. 1. Downloading ============== -kmemcheck can only be downloaded using git. If you want to write patches -against the current code, you should use the kmemcheck development branch of -the tip tree. It is also possible to use the linux-next tree, which also -includes the latest version of kmemcheck. - -Assuming that you've already cloned the linux-2.6.git repository, all you -have to do is add the -tip tree as a remote, like this: - - $ git remote add tip git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git - -To actually download the tree, fetch the remote: - - $ git fetch tip - -And to check out a new local branch with the kmemcheck code: - - $ git checkout -b kmemcheck tip/kmemcheck - -General instructions for the -tip tree can be found here: -http://people.redhat.com/mingo/tip.git/readme.txt +As of version 2.6.31-rc1, kmemcheck is included in the mainline kernel. 2. Configuring and compiling -- cgit v1.2.3-70-g09d2 From ee8076ed3e1cdd0cd1e61318386932669c90b92f Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 2 Jul 2009 09:45:18 -0400 Subject: power_supply: Add a charge_type property, and use it for olpc driver This adds a new sysfs file called 'charge_type' which displays the type of charging (unknown, n/a, trickle charge, or fast charging). This allows things like battery diagnostics to determine what the battery/EC is doing without resorting to changing the 'status' sysfs output. Signed-off-by: Andres Salomon Acked-by: Mark Brown Signed-off-by: Anton Vorontsov --- Documentation/power/power_supply_class.txt | 5 +++++ drivers/power/olpc_battery.c | 9 +++++++++ drivers/power/power_supply_sysfs.c | 6 ++++++ include/linux/power_supply.h | 8 ++++++++ 4 files changed, 28 insertions(+) (limited to 'Documentation') diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 709d95571d7..9f16c5178b6 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -76,6 +76,11 @@ STATUS - this attribute represents operating status (charging, full, discharging (i.e. powering a load), etc.). This corresponds to BATTERY_STATUS_* values, as defined in battery.h. +CHARGE_TYPE - batteries can typically charge at different rates. +This defines trickle and fast charges. For batteries that +are already charged or discharging, 'n/a' can be displayed (or +'unknown', if the status is not known). + HEALTH - represents health of the battery, values corresponds to POWER_SUPPLY_HEALTH_*, defined in battery.h. diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 602bbd008f7..8fefe5a7355 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -233,6 +233,14 @@ static int olpc_bat_get_property(struct power_supply *psy, if (ret) return ret; break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + if (ec_byte & BAT_STAT_TRICKLE) + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + else if (ec_byte & BAT_STAT_CHARGING) + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + else + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; case POWER_SUPPLY_PROP_PRESENT: val->intval = !!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)); @@ -325,6 +333,7 @@ static int olpc_bat_get_property(struct power_supply *psy, static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_TECHNOLOGY, diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 9deabbde6fd..08144393d64 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -43,6 +43,9 @@ static ssize_t power_supply_show_property(struct device *dev, static char *status_text[] = { "Unknown", "Charging", "Discharging", "Not charging", "Full" }; + static char *charge_type[] = { + "Unknown", "N/A", "Trickle", "Fast" + }; static char *health_text[] = { "Unknown", "Good", "Overheat", "Dead", "Over voltage", "Unspecified failure", "Cold", @@ -70,6 +73,8 @@ static ssize_t power_supply_show_property(struct device *dev, if (off == POWER_SUPPLY_PROP_STATUS) return sprintf(buf, "%s\n", status_text[value.intval]); + else if (off == POWER_SUPPLY_PROP_CHARGE_TYPE) + return sprintf(buf, "%s\n", charge_type[value.intval]); else if (off == POWER_SUPPLY_PROP_HEALTH) return sprintf(buf, "%s\n", health_text[value.intval]); else if (off == POWER_SUPPLY_PROP_TECHNOLOGY) @@ -86,6 +91,7 @@ static ssize_t power_supply_show_property(struct device *dev, static struct device_attribute power_supply_attrs[] = { /* Properties of type `int' */ POWER_SUPPLY_ATTR(status), + POWER_SUPPLY_ATTR(charge_type), POWER_SUPPLY_ATTR(health), POWER_SUPPLY_ATTR(present), POWER_SUPPLY_ATTR(online), diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 0ab6aa17124..4c7c6fc3548 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -38,6 +38,13 @@ enum { POWER_SUPPLY_STATUS_FULL, }; +enum { + POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0, + POWER_SUPPLY_CHARGE_TYPE_NONE, + POWER_SUPPLY_CHARGE_TYPE_TRICKLE, + POWER_SUPPLY_CHARGE_TYPE_FAST, +}; + enum { POWER_SUPPLY_HEALTH_UNKNOWN = 0, POWER_SUPPLY_HEALTH_GOOD, @@ -70,6 +77,7 @@ enum { enum power_supply_property { /* Properties of type `int' */ POWER_SUPPLY_PROP_STATUS = 0, + POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_ONLINE, -- cgit v1.2.3-70-g09d2 From 240ebbf81f149b11a31e060ebe5ee51a3c775360 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 25 Jun 2009 09:08:18 -0700 Subject: rcu: Add synchronize_sched_expedited() rcutorture doc + updates This patch updates the rcutorture documentation to include updated output format. It also brings the RCU documentation up to date. Signed-off-by: Paul E. McKenney Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Cc: davem@davemloft.net Cc: dada1@cosmosbay.com Cc: zbr@ioremap.net Cc: jeff.chua.linux@gmail.com Cc: paulus@samba.org Cc: laijs@cn.fujitsu.com Cc: jengelh@medozas.de Cc: r000n@r000n.net Cc: benh@kernel.crashing.org Cc: mathieu.desnoyers@polymtl.ca LKML-Reference: <12459460983193-git-send-email-> Signed-off-by: Ingo Molnar --- Documentation/RCU/RTFP.txt | 77 ++++++++++++++++++++++++++++++++++++++++ Documentation/RCU/UP.txt | 34 +++++++++++++----- Documentation/RCU/checklist.txt | 20 ++++++++--- Documentation/RCU/rcubarrier.txt | 7 ++++ Documentation/RCU/torture.txt | 23 ++++++++++-- Documentation/RCU/whatisRCU.txt | 14 ++++++-- 6 files changed, 156 insertions(+), 19 deletions(-) (limited to 'Documentation') diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt index 9f711d2df91..d2b85237c76 100644 --- a/Documentation/RCU/RTFP.txt +++ b/Documentation/RCU/RTFP.txt @@ -743,3 +743,80 @@ Revised: RCU, realtime RCU, sleepable RCU, performance. " } + +@article{PaulEMcKenney2008RCUOSR +,author="Paul E. McKenney and Jonathan Walpole" +,title="Introducing technology into the {Linux} kernel: a case study" +,Year="2008" +,journal="SIGOPS Oper. Syst. Rev." +,volume="42" +,number="5" +,pages="4--17" +,issn="0163-5980" +,doi={http://doi.acm.org/10.1145/1400097.1400099} +,publisher="ACM" +,address="New York, NY, USA" +,annotation={ + Linux changed RCU to a far greater degree than RCU has changed Linux. +} +} + +@unpublished{PaulEMcKenney2008HierarchicalRCU +,Author="Paul E. McKenney" +,Title="Hierarchical {RCU}" +,month="November" +,day="3" +,year="2008" +,note="Available: +\url{http://lwn.net/Articles/305782/} +[Viewed November 6, 2008]" +,annotation=" + RCU with combining-tree-based grace-period detection, + permitting it to handle thousands of CPUs. +" +} + +@conference{PaulEMcKenney2009MaliciousURCU +,Author="Paul E. McKenney" +,Title="Using a Malicious User-Level {RCU} to Torture {RCU}-Based Algorithms" +,Booktitle="linux.conf.au 2009" +,month="January" +,year="2009" +,address="Hobart, Australia" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/urcutorture.2009.01.22a.pdf} +[Viewed February 2, 2009]" +,annotation=" + Realtime RCU and torture-testing RCU uses. +" +} + +@unpublished{MathieuDesnoyers2009URCU +,Author="Mathieu Desnoyers" +,Title="[{RFC} git tree] Userspace {RCU} (urcu) for {Linux}" +,month="February" +,day="5" +,year="2009" +,note="Available: +\url{http://lkml.org/lkml/2009/2/5/572} +\url{git://lttng.org/userspace-rcu.git} +[Viewed February 20, 2009]" +,annotation=" + Mathieu Desnoyers's user-space RCU implementation. + git://lttng.org/userspace-rcu.git +" +} + +@unpublished{PaulEMcKenney2009BloatWatchRCU +,Author="Paul E. McKenney" +,Title="{RCU}: The {Bloatwatch} Edition" +,month="March" +,day="17" +,year="2009" +,note="Available: +\url{http://lwn.net/Articles/323929/} +[Viewed March 20, 2009]" +,annotation=" + Uniprocessor assumptions allow simplified RCU implementation. +" +} diff --git a/Documentation/RCU/UP.txt b/Documentation/RCU/UP.txt index aab4a9ec393..90ec5341ee9 100644 --- a/Documentation/RCU/UP.txt +++ b/Documentation/RCU/UP.txt @@ -2,14 +2,13 @@ RCU on Uniprocessor Systems A common misconception is that, on UP systems, the call_rcu() primitive -may immediately invoke its function, and that the synchronize_rcu() -primitive may return immediately. The basis of this misconception +may immediately invoke its function. The basis of this misconception is that since there is only one CPU, it should not be necessary to wait for anything else to get done, since there are no other CPUs for anything else to be happening on. Although this approach will -sort- -of- work a surprising amount of the time, it is a very bad idea in general. -This document presents three examples that demonstrate exactly how bad an -idea this is. +This document presents three examples that demonstrate exactly how bad +an idea this is. Example 1: softirq Suicide @@ -82,11 +81,18 @@ Quick Quiz #2: What locking restriction must RCU callbacks respect? Summary -Permitting call_rcu() to immediately invoke its arguments or permitting -synchronize_rcu() to immediately return breaks RCU, even on a UP system. -So do not do it! Even on a UP system, the RCU infrastructure -must- -respect grace periods, and -must- invoke callbacks from a known environment -in which no locks are held. +Permitting call_rcu() to immediately invoke its arguments breaks RCU, +even on a UP system. So do not do it! Even on a UP system, the RCU +infrastructure -must- respect grace periods, and -must- invoke callbacks +from a known environment in which no locks are held. + +It -is- safe for synchronize_sched() and synchronize_rcu_bh() to return +immediately on an UP system. It is also safe for synchronize_rcu() +to return immediately on UP systems, except when running preemptable +RCU. + +Quick Quiz #3: Why can't synchronize_rcu() return immediately on + UP systems running preemptable RCU? Answer to Quick Quiz #1: @@ -117,3 +123,13 @@ Answer to Quick Quiz #2: callbacks acquire locks directly. However, a great many RCU callbacks do acquire locks -indirectly-, for example, via the kfree() primitive. + +Answer to Quick Quiz #3: + Why can't synchronize_rcu() return immediately on UP systems + running preemptable RCU? + + Because some other task might have been preempted in the middle + of an RCU read-side critical section. If synchronize_rcu() + simply immediately returned, it would prematurely signal the + end of the grace period, which would come as a nasty shock to + that other thread when it started running again. diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index accfe2f5247..51525a30e8b 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -11,7 +11,10 @@ over a rather long period of time, but improvements are always welcome! structure is updated more than about 10% of the time, then you should strongly consider some other approach, unless detailed performance measurements show that RCU is nonetheless - the right tool for the job. + the right tool for the job. Yes, you might think of RCU + as simply cutting overhead off of the readers and imposing it + on the writers. That is exactly why normal uses of RCU will + do much more reading than updating. Another exception is where performance is not an issue, and RCU provides a simpler implementation. An example of this situation @@ -240,10 +243,11 @@ over a rather long period of time, but improvements are always welcome! instead need to use synchronize_irq() or synchronize_sched(). 12. Any lock acquired by an RCU callback must be acquired elsewhere - with irq disabled, e.g., via spin_lock_irqsave(). Failing to - disable irq on a given acquisition of that lock will result in - deadlock as soon as the RCU callback happens to interrupt that - acquisition's critical section. + with softirq disabled, e.g., via spin_lock_irqsave(), + spin_lock_bh(), etc. Failing to disable irq on a given + acquisition of that lock will result in deadlock as soon as the + RCU callback happens to interrupt that acquisition's critical + section. 13. RCU callbacks can be and are executed in parallel. In many cases, the callback code simply wrappers around kfree(), so that this @@ -310,3 +314,9 @@ over a rather long period of time, but improvements are always welcome! Because these primitives only wait for pre-existing readers, it is the caller's responsibility to guarantee safety to any subsequent readers. + +16. The various RCU read-side primitives do -not- contain memory + barriers. The CPU (and in some cases, the compiler) is free + to reorder code into and out of RCU read-side critical sections. + It is the responsibility of the RCU update-side primitives to + deal with this. diff --git a/Documentation/RCU/rcubarrier.txt b/Documentation/RCU/rcubarrier.txt index 909602d409b..e439a0edee2 100644 --- a/Documentation/RCU/rcubarrier.txt +++ b/Documentation/RCU/rcubarrier.txt @@ -170,6 +170,13 @@ module invokes call_rcu() from timers, you will need to first cancel all the timers, and only then invoke rcu_barrier() to wait for any remaining RCU callbacks to complete. +Of course, if you module uses call_rcu_bh(), you will need to invoke +rcu_barrier_bh() before unloading. Similarly, if your module uses +call_rcu_sched(), you will need to invoke rcu_barrier_sched() before +unloading. If your module uses call_rcu(), call_rcu_bh(), -and- +call_rcu_sched(), then you will need to invoke each of rcu_barrier(), +rcu_barrier_bh(), and rcu_barrier_sched(). + Implementing rcu_barrier() diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt index a342b6e1cc1..9dba3bb90e6 100644 --- a/Documentation/RCU/torture.txt +++ b/Documentation/RCU/torture.txt @@ -76,8 +76,10 @@ torture_type The type of RCU to test: "rcu" for the rcu_read_lock() API, "rcu_sync" for rcu_read_lock() with synchronous reclamation, "rcu_bh" for the rcu_read_lock_bh() API, "rcu_bh_sync" for rcu_read_lock_bh() with synchronous reclamation, "srcu" for - the "srcu_read_lock()" API, and "sched" for the use of - preempt_disable() together with synchronize_sched(). + the "srcu_read_lock()" API, "sched" for the use of + preempt_disable() together with synchronize_sched(), + and "sched_expedited" for the use of preempt_disable() + with synchronize_sched_expedited(). verbose Enable debug printk()s. Default is disabled. @@ -162,6 +164,23 @@ of the "old" and "current" counters for the corresponding CPU. The "idx" value maps the "old" and "current" values to the underlying array, and is useful for debugging. +Similarly, sched_expedited RCU provides the following: + + sched_expedited-torture: rtc: d0000000016c1880 ver: 1090796 tfle: 0 rta: 1090796 rtaf: 0 rtf: 1090787 rtmbe: 0 nt: 27713319 + sched_expedited-torture: Reader Pipe: 12660320201 95875 0 0 0 0 0 0 0 0 0 + sched_expedited-torture: Reader Batch: 12660424885 0 0 0 0 0 0 0 0 0 0 + sched_expedited-torture: Free-Block Circulation: 1090795 1090795 1090794 1090793 1090792 1090791 1090790 1090789 1090788 1090787 0 + state: -1 / 0:0 3:0 4:0 + +As before, the first four lines are similar to those for RCU. +The last line shows the task-migration state. The first number is +-1 if synchronize_sched_expedited() is idle, -2 if in the process of +posting wakeups to the migration kthreads, and N when waiting on CPU N. +Each of the colon-separated fields following the "/" is a CPU:state pair. +Valid states are "0" for idle, "1" for waiting for quiescent state, +"2" for passed through quiescent state, and "3" when a race with a +CPU-hotplug event forces use of the synchronize_sched() primitive. + USAGE diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 96170824a71..97ded2432c5 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -785,6 +785,7 @@ RCU pointer/list traversal: rcu_dereference list_for_each_entry_rcu hlist_for_each_entry_rcu + hlist_nulls_for_each_entry_rcu list_for_each_continue_rcu (to be deprecated in favor of new list_for_each_entry_continue_rcu) @@ -807,19 +808,23 @@ RCU: Critical sections Grace period Barrier rcu_read_lock synchronize_net rcu_barrier rcu_read_unlock synchronize_rcu + synchronize_rcu_expedited call_rcu bh: Critical sections Grace period Barrier rcu_read_lock_bh call_rcu_bh rcu_barrier_bh - rcu_read_unlock_bh + rcu_read_unlock_bh synchronize_rcu_bh + synchronize_rcu_bh_expedited sched: Critical sections Grace period Barrier - [preempt_disable] synchronize_sched rcu_barrier_sched - [and friends] call_rcu_sched + rcu_read_lock_sched synchronize_sched rcu_barrier_sched + rcu_read_unlock_sched call_rcu_sched + [preempt_disable] synchronize_sched_expedited + [and friends] SRCU: Critical sections Grace period Barrier @@ -827,6 +832,9 @@ SRCU: Critical sections Grace period Barrier srcu_read_lock synchronize_srcu N/A srcu_read_unlock +SRCU: Initialization/cleanup + init_srcu_struct + cleanup_srcu_struct See the comment headers in the source code (or the docbook generated from them) for more information. -- cgit v1.2.3-70-g09d2 From 96ccd4a43a4d80c80be636cd025a69959cf47424 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 5 Jul 2009 12:47:52 +0200 Subject: genirq: Remove obsolete defines and typedefs The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have been kept around for migration reasons. The last users are gone, remove them. Signed-off-by: Thomas Gleixner --- Documentation/feature-removal-schedule.txt | 9 --------- include/linux/irq.h | 7 ------- 2 files changed, 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index f8cd450be9a..2af78126b05 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -394,15 +394,6 @@ Who: Thomas Gleixner ----------------------------- -What: obsolete generic irq defines and typedefs -When: 2.6.30 -Why: The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) - have been kept around for migration reasons. After more than two years - it's time to remove them finally -Who: Thomas Gleixner - ---------------------------- - What: fakephp and associated sysfs files in /sys/bus/pci/slots/ When: 2011 Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to diff --git a/include/linux/irq.h b/include/linux/irq.h index cb2e77a3f7f..6956df9961a 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -219,13 +219,6 @@ static inline struct irq_desc *move_irq_desc(struct irq_desc *desc, int node) extern struct irq_desc *irq_to_desc_alloc_node(unsigned int irq, int node); -/* - * Migration helpers for obsolete names, they will go away: - */ -#define hw_interrupt_type irq_chip -#define no_irq_type no_irq_chip -typedef struct irq_desc irq_desc_t; - /* * Pick up the arch-dependent methods: */ -- cgit v1.2.3-70-g09d2 From a6bae20559bb0371e89ebc46689e9cf4e7816813 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 6 Jul 2009 15:15:22 +0200 Subject: ALSA: hda - Add quirk for MacBook Pro 5,5 with CS4206 Add the default pin configs for MBP55. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 4 ++ sound/pci/hda/patch_cirrus.c | 57 ++++++++++++++++++++++++++++ 2 files changed, 61 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index a1895d7f3cf..4d120a66fc7 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -381,3 +381,7 @@ STAC9872 ======== vaio VAIO laptop without SPDIF auto BIOS setup (default) + +Cirrus Logic CS4206/4207 +======================== + mbp55 MacBook Pro 5,5 diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 404c120991b..b1fd183d760 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -30,6 +30,7 @@ */ struct cs_spec { + int board_config; struct auto_pin_cfg autocfg; struct hda_multi_out multiout; struct snd_kcontrol *vmaster_sw; @@ -58,6 +59,13 @@ struct cs_spec { unsigned int mic_detect:1; }; +/* available models */ +enum { + CS420X_MBP55, + CS420X_AUTO, + CS420X_MODELS +}; + /* Vendor-specific processing widget */ #define CS420X_VENDOR_NID 0x11 #define CS_DIG_OUT1_PIN_NID 0x10 @@ -1038,6 +1046,49 @@ static int cs_parse_auto_config(struct hda_codec *codec) return 0; } +static const char *cs420x_models[CS420X_MODELS] = { + [CS420X_MBP55] = "mbp55", + [CS420X_AUTO] = "auto", +}; + + +static struct snd_pci_quirk cs420x_cfg_tbl[] = { + SND_PCI_QUIRK(0x10de, 0xcb79, "MacBookPro 5,5", CS420X_MBP55), + {} /* terminator */ +}; + +struct cs_pincfg { + hda_nid_t nid; + u32 val; +}; + +static struct cs_pincfg mbp55_pincfgs[] = { + { 0x09, 0x012b4030 }, + { 0x0a, 0x90100121 }, + { 0x0b, 0x90100120 }, + { 0x0c, 0x400000f0 }, + { 0x0d, 0x90a00110 }, + { 0x0e, 0x400000f0 }, + { 0x0f, 0x400000f0 }, + { 0x10, 0x014be040 }, + { 0x12, 0x400000f0 }, + { 0x15, 0x400000f0 }, + {} /* terminator */ +}; + +static struct cs_pincfg *cs_pincfgs[CS420X_MODELS] = { + [CS420X_MBP55] = mbp55_pincfgs, +}; + +static void fix_pincfg(struct hda_codec *codec, int model) +{ + const struct cs_pincfg *cfg = cs_pincfgs[model]; + if (!cfg) + return; + for (; cfg->nid; cfg++) + snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val); +} + static int patch_cs420x(struct hda_codec *codec) { @@ -1049,6 +1100,12 @@ static int patch_cs420x(struct hda_codec *codec) return -ENOMEM; codec->spec = spec; + spec->board_config = + snd_hda_check_board_config(codec, CS420X_MODELS, + cs420x_models, cs420x_cfg_tbl); + if (spec->board_config >= 0) + fix_pincfg(codec, spec->board_config); + err = cs_parse_auto_config(codec); if (err < 0) goto error; -- cgit v1.2.3-70-g09d2 From bff38771e1065c7fc3de87e47ba366151eea573c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 8 Jul 2009 11:10:56 -0700 Subject: netpoll: Introduce netpoll_carrier_timeout kernel option Some PHYs require longer timeouts for carrier detection, and auto-negotiation process may take indefinite amount of time. It may be inconvenient to force longer timeouts for sane PHYs, so let's introduce a kernel command line option. Since we're using module_param(), the option also can be changed in runtime. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- Documentation/kernel-parameters.txt | 5 +++++ net/core/netpoll.c | 6 +++++- 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d77fbd8b79a..9347f4ad434 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1531,6 +1531,11 @@ and is between 256 and 4096 characters. It is defined in the file symbolic names: lapic and ioapic Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic + netpoll.carrier_timeout= + [NET] Specifies amount of time (in seconds) that + netpoll should wait for a carrier. By default netpoll + waits 4 seconds. + no387 [BUGS=X86-32] Tells the kernel to use the 387 maths emulation library even if a 387 maths coprocessor is present. diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 9675f312830..3afe381e24a 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -9,6 +9,7 @@ * Copyright (C) 2002 Red Hat, Inc. */ +#include #include #include #include @@ -50,6 +51,9 @@ static atomic_t trapped; static void zap_completion_queue(void); static void arp_reply(struct sk_buff *skb); +static unsigned int carrier_timeout = 4; +module_param(carrier_timeout, uint, 0644); + static void queue_process(struct work_struct *work) { struct netpoll_info *npinfo = @@ -732,7 +736,7 @@ int netpoll_setup(struct netpoll *np) } atleast = jiffies + HZ/10; - atmost = jiffies + 4*HZ; + atmost = jiffies + carrier_timeout * HZ; while (!netif_carrier_ok(ndev)) { if (time_after(jiffies, atmost)) { printk(KERN_NOTICE -- cgit v1.2.3-70-g09d2 From 5bb38adcb54cf7192b154368ad62982caa11ca0b Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 9 Jul 2009 00:31:39 +0200 Subject: x86: mce: Remove old i386 machine check code As announced in feature-remove-schedule.txt remove CONFIG_X86_OLD_MCE This patch only removes code. The ancient machine check code for very old systems that are not supported by CONFIG_X86_NEW_MCE is still kept. Signed-off-by: Andi Kleen Signed-off-by: H. Peter Anvin --- Documentation/feature-removal-schedule.txt | 10 -- arch/x86/Kconfig | 35 +------ arch/x86/include/asm/mce.h | 11 -- arch/x86/kernel/cpu/mcheck/Makefile | 2 - arch/x86/kernel/cpu/mcheck/k7.c | 116 -------------------- arch/x86/kernel/cpu/mcheck/mce.c | 47 --------- arch/x86/kernel/cpu/mcheck/non-fatal.c | 94 ----------------- arch/x86/kernel/cpu/mcheck/p4.c | 163 ----------------------------- arch/x86/kernel/cpu/mcheck/p6.c | 127 ---------------------- 9 files changed, 2 insertions(+), 603 deletions(-) delete mode 100644 arch/x86/kernel/cpu/mcheck/k7.c delete mode 100644 arch/x86/kernel/cpu/mcheck/non-fatal.c delete mode 100644 arch/x86/kernel/cpu/mcheck/p4.c delete mode 100644 arch/x86/kernel/cpu/mcheck/p6.c (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 7129846a278..edb2f0b0761 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -444,13 +444,3 @@ What: CONFIG_RFKILL_INPUT When: 2.6.33 Why: Should be implemented in userspace, policy daemon. Who: Johannes Berg - ----------------------------- - -What: CONFIG_X86_OLD_MCE -When: 2.6.32 -Why: Remove the old legacy 32bit machine check code. This has been - superseded by the newer machine check code from the 64bit port, - but the old version has been kept around for easier testing. Note this - doesn't impact the old P5 and WinChip machine check handlers. -Who: Andi Kleen diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 134a8c0d80d..d986769a7d9 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -781,21 +781,10 @@ config X86_MCE The action the kernel takes depends on the severity of the problem, ranging from warning messages to halting the machine. -config X86_OLD_MCE - depends on X86_32 && X86_MCE - bool "Use legacy machine check code (will go away)" - default n - select X86_ANCIENT_MCE - ---help--- - Use the old i386 machine check code. This is merely intended for - testing in a transition period. Try this if you run into any machine - check related software problems, but report the problem to - linux-kernel. When in doubt say no. - config X86_NEW_MCE depends on X86_MCE bool - default y if (!X86_OLD_MCE && X86_32) || X86_64 + default y config X86_MCE_INTEL def_bool y @@ -835,29 +824,9 @@ config X86_MCE_INJECT If you don't know what a machine check is and you don't do kernel QA it is safe to say n. -config X86_MCE_NONFATAL - tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4" - depends on X86_OLD_MCE - ---help--- - Enabling this feature starts a timer that triggers every 5 seconds which - will look at the machine check registers to see if anything happened. - Non-fatal problems automatically get corrected (but still logged). - Disable this if you don't want to see these messages. - Seeing the messages this option prints out may be indicative of dying - or out-of-spec (ie, overclocked) hardware. - This option only does something on certain CPUs. - (AMD Athlon/Duron and Intel Pentium 4) - -config X86_MCE_P4THERMAL - bool "check for P4 thermal throttling interrupt." - depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP) - ---help--- - Enabling this feature will cause a message to be printed when the P4 - enters thermal throttling. - config X86_THERMAL_VECTOR def_bool y - depends on X86_MCE_P4THERMAL || X86_MCE_INTEL + depends on X86_MCE_INTEL config VM86 bool "Enable VM86 support" if EMBEDDED diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index b50b9e9042c..6b8a974e127 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -115,13 +115,6 @@ void mcheck_init(struct cpuinfo_x86 *c); static inline void mcheck_init(struct cpuinfo_x86 *c) {} #endif -#ifdef CONFIG_X86_OLD_MCE -extern int nr_mce_banks; -void amd_mcheck_init(struct cpuinfo_x86 *c); -void intel_p4_mcheck_init(struct cpuinfo_x86 *c); -void intel_p6_mcheck_init(struct cpuinfo_x86 *c); -#endif - #ifdef CONFIG_X86_ANCIENT_MCE void intel_p5_mcheck_init(struct cpuinfo_x86 *c); void winchip_mcheck_init(struct cpuinfo_x86 *c); @@ -208,11 +201,7 @@ extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu); void intel_init_thermal(struct cpuinfo_x86 *c); -#ifdef CONFIG_X86_NEW_MCE void mce_log_therm_throt_event(__u64 status); -#else -static inline void mce_log_therm_throt_event(__u64 status) {} -#endif #endif /* __KERNEL__ */ #endif /* _ASM_X86_MCE_H */ diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile index 188a1ca5ad2..022a036ce21 100644 --- a/arch/x86/kernel/cpu/mcheck/Makefile +++ b/arch/x86/kernel/cpu/mcheck/Makefile @@ -1,11 +1,9 @@ obj-y = mce.o obj-$(CONFIG_X86_NEW_MCE) += mce-severity.o -obj-$(CONFIG_X86_OLD_MCE) += k7.o p4.o p6.o obj-$(CONFIG_X86_ANCIENT_MCE) += winchip.o p5.o obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o obj-$(CONFIG_X86_MCE_AMD) += mce_amd.o -obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o obj-$(CONFIG_X86_MCE_INJECT) += mce-inject.o diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c deleted file mode 100644 index b945d5dbc60..00000000000 --- a/arch/x86/kernel/cpu/mcheck/k7.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Athlon specific Machine Check Exception Reporting - * (C) Copyright 2002 Dave Jones - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Machine Check Handler For AMD Athlon/Duron: */ -static void k7_machine_check(struct pt_regs *regs, long error_code) -{ - u32 alow, ahigh, high, low; - u32 mcgstl, mcgsth; - int recover = 1; - int i; - - rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); - if (mcgstl & (1<<0)) /* Recoverable ? */ - recover = 0; - - printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", - smp_processor_id(), mcgsth, mcgstl); - - for (i = 1; i < nr_mce_banks; i++) { - rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high); - if (high & (1<<31)) { - char misc[20]; - char addr[24]; - - misc[0] = '\0'; - addr[0] = '\0'; - - if (high & (1<<29)) - recover |= 1; - if (high & (1<<25)) - recover |= 2; - high &= ~(1<<31); - - if (high & (1<<27)) { - rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh); - snprintf(misc, 20, "[%08x%08x]", ahigh, alow); - } - if (high & (1<<26)) { - rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh); - snprintf(addr, 24, " at %08x%08x", ahigh, alow); - } - - printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n", - smp_processor_id(), i, high, low, misc, addr); - - /* Clear it: */ - wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL); - /* Serialize: */ - wmb(); - add_taint(TAINT_MACHINE_CHECK); - } - } - - if (recover & 2) - panic("CPU context corrupt"); - if (recover & 1) - panic("Unable to continue"); - - printk(KERN_EMERG "Attempting to continue.\n"); - - mcgstl &= ~(1<<2); - wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); -} - - -/* AMD K7 machine check is Intel like: */ -void amd_mcheck_init(struct cpuinfo_x86 *c) -{ - u32 l, h; - int i; - - if (!cpu_has(c, X86_FEATURE_MCE)) - return; - - machine_check_vector = k7_machine_check; - /* Make sure the vector pointer is visible before we enable MCEs: */ - wmb(); - - printk(KERN_INFO "Intel machine check architecture supported.\n"); - - rdmsr(MSR_IA32_MCG_CAP, l, h); - if (l & (1<<8)) /* Control register present ? */ - wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); - nr_mce_banks = l & 0xff; - - /* - * Clear status for MC index 0 separately, we don't touch CTL, - * as some K7 Athlons cause spurious MCEs when its enabled: - */ - if (boot_cpu_data.x86 == 6) { - wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0); - i = 1; - } else - i = 0; - - for (; i < nr_mce_banks; i++) { - wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); - wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); - } - - set_in_cr4(X86_CR4_MCE); - printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", - smp_processor_id()); -} diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 7da8fec9ca8..5ff6362ecb1 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -58,8 +58,6 @@ void (*machine_check_vector)(struct pt_regs *, long error_code) = int mce_disabled __read_mostly; -#ifdef CONFIG_X86_NEW_MCE - #define MISC_MCELOG_MINOR 227 #define SPINUNIT 100 /* 100ns */ @@ -1993,51 +1991,6 @@ static __init int mce_init_device(void) device_initcall(mce_init_device); -#else /* CONFIG_X86_OLD_MCE: */ - -int nr_mce_banks; -EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */ - -/* This has to be run for each processor */ -void mcheck_init(struct cpuinfo_x86 *c) -{ - if (mce_disabled) - return; - - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - amd_mcheck_init(c); - break; - - case X86_VENDOR_INTEL: - if (c->x86 == 5) - intel_p5_mcheck_init(c); - if (c->x86 == 6) - intel_p6_mcheck_init(c); - if (c->x86 == 15) - intel_p4_mcheck_init(c); - break; - - case X86_VENDOR_CENTAUR: - if (c->x86 == 5) - winchip_mcheck_init(c); - break; - - default: - break; - } - printk(KERN_INFO "mce: CPU supports %d MCE banks\n", nr_mce_banks); -} - -static int __init mcheck_enable(char *str) -{ - mce_p5_enabled = 1; - return 1; -} -__setup("mce", mcheck_enable); - -#endif /* CONFIG_X86_OLD_MCE */ - /* * Old style boot options parsing. Only for compatibility. */ diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c deleted file mode 100644 index f5f2d6f71fb..00000000000 --- a/arch/x86/kernel/cpu/mcheck/non-fatal.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Non Fatal Machine Check Exception Reporting - * - * (C) Copyright 2002 Dave Jones. - * - * This file contains routines to check for non-fatal MCEs every 15s - * - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -static int firstbank; - -#define MCE_RATE (15*HZ) /* timer rate is 15s */ - -static void mce_checkregs(void *info) -{ - u32 low, high; - int i; - - for (i = firstbank; i < nr_mce_banks; i++) { - rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high); - - if (!(high & (1<<31))) - continue; - - printk(KERN_INFO "MCE: The hardware reports a non fatal, " - "correctable incident occurred on CPU %d.\n", - smp_processor_id()); - - printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low); - - /* - * Scrub the error so we don't pick it up in MCE_RATE - * seconds time: - */ - wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL); - - /* Serialize: */ - wmb(); - add_taint(TAINT_MACHINE_CHECK); - } -} - -static void mce_work_fn(struct work_struct *work); -static DECLARE_DELAYED_WORK(mce_work, mce_work_fn); - -static void mce_work_fn(struct work_struct *work) -{ - on_each_cpu(mce_checkregs, NULL, 1); - schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE)); -} - -static int __init init_nonfatal_mce_checker(void) -{ - struct cpuinfo_x86 *c = &boot_cpu_data; - - /* Check for MCE support */ - if (!cpu_has(c, X86_FEATURE_MCE)) - return -ENODEV; - - /* Check for PPro style MCA */ - if (!cpu_has(c, X86_FEATURE_MCA)) - return -ENODEV; - - /* Some Athlons misbehave when we frob bank 0 */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 == 6) - firstbank = 1; - else - firstbank = 0; - - /* - * Check for non-fatal errors every MCE_RATE s - */ - schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE)); - printk(KERN_INFO "Machine check exception polling timer started.\n"); - - return 0; -} -module_init(init_nonfatal_mce_checker); - -MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c deleted file mode 100644 index 4482aea9aa2..00000000000 --- a/arch/x86/kernel/cpu/mcheck/p4.c +++ /dev/null @@ -1,163 +0,0 @@ -/* - * P4 specific Machine Check Exception Reporting - */ -#include -#include -#include -#include - -#include -#include -#include - -/* as supported by the P4/Xeon family */ -struct intel_mce_extended_msrs { - u32 eax; - u32 ebx; - u32 ecx; - u32 edx; - u32 esi; - u32 edi; - u32 ebp; - u32 esp; - u32 eflags; - u32 eip; - /* u32 *reserved[]; */ -}; - -static int mce_num_extended_msrs; - -/* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */ -static void intel_get_extended_msrs(struct intel_mce_extended_msrs *r) -{ - u32 h; - - rdmsr(MSR_IA32_MCG_EAX, r->eax, h); - rdmsr(MSR_IA32_MCG_EBX, r->ebx, h); - rdmsr(MSR_IA32_MCG_ECX, r->ecx, h); - rdmsr(MSR_IA32_MCG_EDX, r->edx, h); - rdmsr(MSR_IA32_MCG_ESI, r->esi, h); - rdmsr(MSR_IA32_MCG_EDI, r->edi, h); - rdmsr(MSR_IA32_MCG_EBP, r->ebp, h); - rdmsr(MSR_IA32_MCG_ESP, r->esp, h); - rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h); - rdmsr(MSR_IA32_MCG_EIP, r->eip, h); -} - -static void intel_machine_check(struct pt_regs *regs, long error_code) -{ - u32 alow, ahigh, high, low; - u32 mcgstl, mcgsth; - int recover = 1; - int i; - - rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); - if (mcgstl & (1<<0)) /* Recoverable ? */ - recover = 0; - - printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", - smp_processor_id(), mcgsth, mcgstl); - - if (mce_num_extended_msrs > 0) { - struct intel_mce_extended_msrs dbg; - - intel_get_extended_msrs(&dbg); - - printk(KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n" - "\teax: %08x ebx: %08x ecx: %08x edx: %08x\n" - "\tesi: %08x edi: %08x ebp: %08x esp: %08x\n", - smp_processor_id(), dbg.eip, dbg.eflags, - dbg.eax, dbg.ebx, dbg.ecx, dbg.edx, - dbg.esi, dbg.edi, dbg.ebp, dbg.esp); - } - - for (i = 0; i < nr_mce_banks; i++) { - rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high); - if (high & (1<<31)) { - char misc[20]; - char addr[24]; - - misc[0] = addr[0] = '\0'; - if (high & (1<<29)) - recover |= 1; - if (high & (1<<25)) - recover |= 2; - high &= ~(1<<31); - if (high & (1<<27)) { - rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh); - snprintf(misc, 20, "[%08x%08x]", ahigh, alow); - } - if (high & (1<<26)) { - rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh); - snprintf(addr, 24, " at %08x%08x", ahigh, alow); - } - printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n", - smp_processor_id(), i, high, low, misc, addr); - } - } - - if (recover & 2) - panic("CPU context corrupt"); - if (recover & 1) - panic("Unable to continue"); - - printk(KERN_EMERG "Attempting to continue.\n"); - - /* - * Do not clear the MSR_IA32_MCi_STATUS if the error is not - * recoverable/continuable.This will allow BIOS to look at the MSRs - * for errors if the OS could not log the error. - */ - for (i = 0; i < nr_mce_banks; i++) { - u32 msr; - msr = MSR_IA32_MC0_STATUS+i*4; - rdmsr(msr, low, high); - if (high&(1<<31)) { - /* Clear it */ - wrmsr(msr, 0UL, 0UL); - /* Serialize */ - wmb(); - add_taint(TAINT_MACHINE_CHECK); - } - } - mcgstl &= ~(1<<2); - wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); -} - -void intel_p4_mcheck_init(struct cpuinfo_x86 *c) -{ - u32 l, h; - int i; - - machine_check_vector = intel_machine_check; - wmb(); - - printk(KERN_INFO "Intel machine check architecture supported.\n"); - rdmsr(MSR_IA32_MCG_CAP, l, h); - if (l & (1<<8)) /* Control register present ? */ - wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); - nr_mce_banks = l & 0xff; - - for (i = 0; i < nr_mce_banks; i++) { - wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); - wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); - } - - set_in_cr4(X86_CR4_MCE); - printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", - smp_processor_id()); - - /* Check for P4/Xeon extended MCE MSRs */ - rdmsr(MSR_IA32_MCG_CAP, l, h); - if (l & (1<<9)) {/* MCG_EXT_P */ - mce_num_extended_msrs = (l >> 16) & 0xff; - printk(KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)" - " available\n", - smp_processor_id(), mce_num_extended_msrs); - -#ifdef CONFIG_X86_MCE_P4THERMAL - /* Check for P4/Xeon Thermal monitor */ - intel_init_thermal(c); -#endif - } -} diff --git a/arch/x86/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c deleted file mode 100644 index 01e4f817818..00000000000 --- a/arch/x86/kernel/cpu/mcheck/p6.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * P6 specific Machine Check Exception Reporting - * (C) Copyright 2002 Alan Cox - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Machine Check Handler For PII/PIII */ -static void intel_machine_check(struct pt_regs *regs, long error_code) -{ - u32 alow, ahigh, high, low; - u32 mcgstl, mcgsth; - int recover = 1; - int i; - - rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); - if (mcgstl & (1<<0)) /* Recoverable ? */ - recover = 0; - - printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", - smp_processor_id(), mcgsth, mcgstl); - - for (i = 0; i < nr_mce_banks; i++) { - rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high); - if (high & (1<<31)) { - char misc[20]; - char addr[24]; - - misc[0] = '\0'; - addr[0] = '\0'; - - if (high & (1<<29)) - recover |= 1; - if (high & (1<<25)) - recover |= 2; - high &= ~(1<<31); - - if (high & (1<<27)) { - rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh); - snprintf(misc, 20, "[%08x%08x]", ahigh, alow); - } - if (high & (1<<26)) { - rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh); - snprintf(addr, 24, " at %08x%08x", ahigh, alow); - } - - printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n", - smp_processor_id(), i, high, low, misc, addr); - } - } - - if (recover & 2) - panic("CPU context corrupt"); - if (recover & 1) - panic("Unable to continue"); - - printk(KERN_EMERG "Attempting to continue.\n"); - /* - * Do not clear the MSR_IA32_MCi_STATUS if the error is not - * recoverable/continuable.This will allow BIOS to look at the MSRs - * for errors if the OS could not log the error: - */ - for (i = 0; i < nr_mce_banks; i++) { - unsigned int msr; - - msr = MSR_IA32_MC0_STATUS+i*4; - rdmsr(msr, low, high); - if (high & (1<<31)) { - /* Clear it: */ - wrmsr(msr, 0UL, 0UL); - /* Serialize: */ - wmb(); - add_taint(TAINT_MACHINE_CHECK); - } - } - mcgstl &= ~(1<<2); - wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); -} - -/* Set up machine check reporting for processors with Intel style MCE: */ -void intel_p6_mcheck_init(struct cpuinfo_x86 *c) -{ - u32 l, h; - int i; - - /* Check for MCE support */ - if (!cpu_has(c, X86_FEATURE_MCE)) - return; - - /* Check for PPro style MCA */ - if (!cpu_has(c, X86_FEATURE_MCA)) - return; - - /* Ok machine check is available */ - machine_check_vector = intel_machine_check; - /* Make sure the vector pointer is visible before we enable MCEs: */ - wmb(); - - printk(KERN_INFO "Intel machine check architecture supported.\n"); - rdmsr(MSR_IA32_MCG_CAP, l, h); - if (l & (1<<8)) /* Control register present ? */ - wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); - nr_mce_banks = l & 0xff; - - /* - * Following the example in IA-32 SDM Vol 3: - * - MC0_CTL should not be written - * - Status registers on all banks should be cleared on reset - */ - for (i = 1; i < nr_mce_banks; i++) - wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); - - for (i = 0; i < nr_mce_banks; i++) - wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); - - set_in_cr4(X86_CR4_MCE); - printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", - smp_processor_id()); -} -- cgit v1.2.3-70-g09d2 From fa5ec8a1f66f3c2a3af723abcf8085509c9ee682 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 7 Jul 2009 00:14:14 -0700 Subject: slub: add option to disable higher order debugging slabs When debugging is enabled, slub requires that additional metadata be stored in slabs for certain options: SLAB_RED_ZONE, SLAB_POISON, and SLAB_STORE_USER. Consequently, it may require that the minimum possible slab order needed to allocate a single object be greater when using these options. The most notable example is for objects that are PAGE_SIZE bytes in size. Higher minimum slab orders may cause page allocation failures when oom or under heavy fragmentation. This patch adds a new slub_debug option, which disables debugging by default for caches that would have resulted in higher minimum orders: slub_debug=O When this option is used on systems with 4K pages, kmalloc-4096, for example, will not have debugging enabled by default even if CONFIG_SLUB_DEBUG_ON is defined because it would have resulted in a order-1 minimum slab order. Reported-by: Larry Finger Tested-by: Larry Finger Cc: Christoph Lameter Signed-off-by: David Rientjes Signed-off-by: Pekka Enberg --- Documentation/vm/slub.txt | 10 ++++++++++ mm/slub.c | 41 ++++++++++++++++++++++++++++++++++++++--- 2 files changed, 48 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt index bb1f5c6e28b..510917ff59e 100644 --- a/Documentation/vm/slub.txt +++ b/Documentation/vm/slub.txt @@ -41,6 +41,8 @@ Possible debug options are P Poisoning (object and padding) U User tracking (free and alloc) T Trace (please only use on single slabs) + O Switch debugging off for caches that would have + caused higher minimum slab orders - Switch all debugging off (useful if the kernel is configured with CONFIG_SLUB_DEBUG_ON) @@ -59,6 +61,14 @@ to the dentry cache with slub_debug=F,dentry +Debugging options may require the minimum possible slab order to increase as +a result of storing the metadata (for example, caches with PAGE_SIZE object +sizes). This has a higher liklihood of resulting in slab allocation errors +in low memory situations or if there's high fragmentation of memory. To +switch off debugging for such caches by default, use + + slub_debug=O + In case you forgot to enable debugging on the kernel command line: It is possible to enable debugging manually when the kernel is up. Look at the contents of: diff --git a/mm/slub.c b/mm/slub.c index a9201d83178..466089cd5de 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -141,6 +141,13 @@ #define DEBUG_DEFAULT_FLAGS (SLAB_DEBUG_FREE | SLAB_RED_ZONE | \ SLAB_POISON | SLAB_STORE_USER) +/* + * Debugging flags that require metadata to be stored in the slab, up to + * DEBUG_SIZE in size. + */ +#define DEBUG_SIZE_FLAGS (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER) +#define DEBUG_SIZE (3 * sizeof(void *) + 2 * sizeof(struct track)) + /* * Set of flags that will prevent slab merging */ @@ -326,6 +333,7 @@ static int slub_debug; #endif static char *slub_debug_slabs; +static int disable_higher_order_debug; /* * Object debugging @@ -977,6 +985,15 @@ static int __init setup_slub_debug(char *str) */ goto check_slabs; + if (tolower(*str) == 'o') { + /* + * Avoid enabling debugging on caches if its minimum order + * would increase as a result. + */ + disable_higher_order_debug = 1; + goto out; + } + slub_debug = 0; if (*str == '-') /* @@ -1023,13 +1040,27 @@ static unsigned long kmem_cache_flags(unsigned long objsize, unsigned long flags, const char *name, void (*ctor)(void *)) { + int debug_flags = slub_debug; + /* * Enable debugging if selected on the kernel commandline. */ - if (slub_debug && (!slub_debug_slabs || - strncmp(slub_debug_slabs, name, strlen(slub_debug_slabs)) == 0)) - flags |= slub_debug; + if (debug_flags) { + if (slub_debug_slabs && + strncmp(slub_debug_slabs, name, strlen(slub_debug_slabs))) + goto out; + + /* + * Disable debugging that increases slab size if the minimum + * slab order would have increased as a result. + */ + if (disable_higher_order_debug && + get_order(objsize + DEBUG_SIZE) > get_order(objsize)) + debug_flags &= ~DEBUG_SIZE_FLAGS; + flags |= debug_flags; + } +out: return flags; } #else @@ -1561,6 +1592,10 @@ slab_out_of_memory(struct kmem_cache *s, gfp_t gfpflags, int nid) "default order: %d, min order: %d\n", s->name, s->objsize, s->size, oo_order(s->oo), oo_order(s->min)); + if (oo_order(s->min) > get_order(s->objsize)) + printk(KERN_WARNING " %s debugging increased min order, use " + "slub_debug=O to disable.\n", s->name); + for_each_online_node(node) { struct kmem_cache_node *n = get_node(s, node); unsigned long nr_slabs; -- cgit v1.2.3-70-g09d2 From 0741241c6b80bfd58417e95de984d60c9e9ef2a0 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 17 Jul 2009 10:13:21 -0700 Subject: connector: make callback argument type explicit The connector documentation states that the argument to the callback function is always a pointer to a struct cn_msg, but rather than encode it in the API itself, it uses a void pointer everywhere. This doesn't make much sense to encode the pointer in documentation as it prevents proper C type checking from occurring and can easily allow people to use the wrong pointer type. So convert the argument type to an explicit struct cn_msg pointer. Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- Documentation/connector/cn_test.c | 4 +--- drivers/connector/cn_proc.c | 3 +-- drivers/connector/cn_queue.c | 7 +++++-- drivers/connector/connector.c | 6 +++--- drivers/staging/dst/dcore.c | 3 +-- drivers/video/uvesafb.c | 3 +-- drivers/w1/w1_netlink.c | 3 +-- include/linux/connector.h | 6 +++--- 8 files changed, 16 insertions(+), 19 deletions(-) (limited to 'Documentation') diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c index f688eba8770..50d5ce4899c 100644 --- a/Documentation/connector/cn_test.c +++ b/Documentation/connector/cn_test.c @@ -32,10 +32,8 @@ static char cn_test_name[] = "cn_test"; static struct sock *nls; static struct timer_list cn_test_timer; -void cn_test_callback(void *data) +void cn_test_callback(struct cn_msg *msg) { - struct cn_msg *msg = (struct cn_msg *)data; - printk("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n", __func__, jiffies, msg->id.idx, msg->id.val, msg->seq, msg->ack, msg->len, (char *)msg->data); diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c index c5afc98e267..85e5dc0431f 100644 --- a/drivers/connector/cn_proc.c +++ b/drivers/connector/cn_proc.c @@ -202,9 +202,8 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack) * cn_proc_mcast_ctl * @data: message sent from userspace via the connector */ -static void cn_proc_mcast_ctl(void *data) +static void cn_proc_mcast_ctl(struct cn_msg *msg) { - struct cn_msg *msg = data; enum proc_cn_mcast_op *mc_op = NULL; int err = 0; diff --git a/drivers/connector/cn_queue.c b/drivers/connector/cn_queue.c index c769ef269fb..d478aefcd3b 100644 --- a/drivers/connector/cn_queue.c +++ b/drivers/connector/cn_queue.c @@ -87,7 +87,9 @@ void cn_queue_wrapper(struct work_struct *work) kfree(d->free); } -static struct cn_callback_entry *cn_queue_alloc_callback_entry(char *name, struct cb_id *id, void (*callback)(void *)) +static struct cn_callback_entry * +cn_queue_alloc_callback_entry(char *name, struct cb_id *id, + void (*callback)(struct cn_msg *)) { struct cn_callback_entry *cbq; @@ -120,7 +122,8 @@ int cn_cb_equal(struct cb_id *i1, struct cb_id *i2) return ((i1->idx == i2->idx) && (i1->val == i2->val)); } -int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(void *)) +int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, + void (*callback)(struct cn_msg *)) { struct cn_callback_entry *cbq, *__cbq; int found = 0; diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index fd336c5a905..3f45669f5d7 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -269,7 +269,8 @@ static void cn_notify(struct cb_id *id, u32 notify_event) * * May sleep. */ -int cn_add_callback(struct cb_id *id, char *name, void (*callback)(void *)) +int cn_add_callback(struct cb_id *id, char *name, + void (*callback)(struct cn_msg *)) { int err; struct cn_dev *dev = &cdev; @@ -351,9 +352,8 @@ static int cn_ctl_msg_equals(struct cn_ctl_msg *m1, struct cn_ctl_msg *m2) * * Used for notification of a request's processing. */ -static void cn_callback(void *data) +static void cn_callback(struct cn_msg *msg) { - struct cn_msg *msg = data; struct cn_ctl_msg *ctl; struct cn_ctl_entry *ent; u32 size; diff --git a/drivers/staging/dst/dcore.c b/drivers/staging/dst/dcore.c index fad25b75304..84724187ec3 100644 --- a/drivers/staging/dst/dcore.c +++ b/drivers/staging/dst/dcore.c @@ -846,10 +846,9 @@ static dst_command_func dst_commands[] = { /* * Configuration parser. */ -static void cn_dst_callback(void *data) +static void cn_dst_callback(struct cn_msg *msg) { struct dst_ctl *ctl; - struct cn_msg *msg = data; int err; struct dst_ctl_ack ack; struct dst_node *n = NULL, *tmp; diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c index ca5b4643a40..e98baf6916b 100644 --- a/drivers/video/uvesafb.c +++ b/drivers/video/uvesafb.c @@ -67,9 +67,8 @@ static DEFINE_MUTEX(uvfb_lock); * find the kernel part of the task struct, copy the registers and * the buffer contents and then complete the task. */ -static void uvesafb_cn_callback(void *data) +static void uvesafb_cn_callback(struct cn_msg *msg) { - struct cn_msg *msg = data; struct uvesafb_task *utask; struct uvesafb_ktask *task; diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c index fdf72851c57..52ccb3d3a96 100644 --- a/drivers/w1/w1_netlink.c +++ b/drivers/w1/w1_netlink.c @@ -306,9 +306,8 @@ static int w1_netlink_send_error(struct cn_msg *rcmsg, struct w1_netlink_msg *rm return error; } -static void w1_cn_callback(void *data) +static void w1_cn_callback(struct cn_msg *msg) { - struct cn_msg *msg = data; struct w1_netlink_msg *m = (struct w1_netlink_msg *)(msg + 1); struct w1_netlink_cmd *cmd; struct w1_slave *sl; diff --git a/include/linux/connector.h b/include/linux/connector.h index b68d27850d5..47ebf416f51 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -136,7 +136,7 @@ struct cn_callback_data { void *ddata; void *callback_priv; - void (*callback) (void *); + void (*callback) (struct cn_msg *); void *free; }; @@ -167,11 +167,11 @@ struct cn_dev { struct cn_queue_dev *cbdev; }; -int cn_add_callback(struct cb_id *, char *, void (*callback) (void *)); +int cn_add_callback(struct cb_id *, char *, void (*callback) (struct cn_msg *)); void cn_del_callback(struct cb_id *); int cn_netlink_send(struct cn_msg *, u32, gfp_t); -int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(void *)); +int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(struct cn_msg *)); void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id); int queue_cn_work(struct cn_callback_entry *cbq, struct work_struct *work); -- cgit v1.2.3-70-g09d2 From 41144ca3dda6d55b10c46d5b7d86502ccffa1c97 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 17 Jul 2009 10:13:58 -0700 Subject: connector: clean up grammar/style in documentation The grammar in most of this file is slightly off, and some sections are hard to read due to lack of visual clues breaking up related material. Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- Documentation/connector/connector.txt | 119 +++++++++++++++++----------------- 1 file changed, 61 insertions(+), 58 deletions(-) (limited to 'Documentation') diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt index ad6e0ba7b38..81e6bf6ead5 100644 --- a/Documentation/connector/connector.txt +++ b/Documentation/connector/connector.txt @@ -5,10 +5,10 @@ Kernel Connector. Kernel connector - new netlink based userspace <-> kernel space easy to use communication module. -Connector driver adds possibility to connect various agents using -netlink based network. One must register callback and -identifier. When driver receives special netlink message with -appropriate identifier, appropriate callback will be called. +The Connector driver makes it easy to connect various agents using a +netlink based network. One must register a callback and an identifier. +When the driver receives a special netlink message with the appropriate +identifier, the appropriate callback will be called. From the userspace point of view it's quite straightforward: @@ -17,10 +17,10 @@ From the userspace point of view it's quite straightforward: send(); recv(); -But if kernelspace want to use full power of such connections, driver -writer must create special sockets, must know about struct sk_buff -handling... Connector allows any kernelspace agents to use netlink -based networking for inter-process communication in a significantly +But if kernelspace wants to use the full power of such connections, the +driver writer must create special sockets, must know about struct sk_buff +handling, etc... The Connector driver allows any kernelspace agents to use +netlink based networking for inter-process communication in a significantly easier way: int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *)); @@ -32,15 +32,15 @@ struct cb_id __u32 val; }; -idx and val are unique identifiers which must be registered in -connector.h for in-kernel usage. void (*callback) (void *) - is a -callback function which will be called when message with above idx.val -will be received by connector core. Argument for that function must +idx and val are unique identifiers which must be registered in the +connector.h header for in-kernel usage. void (*callback) (void *) is a +callback function which will be called when a message with above idx.val +is received by the connector core. The argument for that function must be dereferenced to struct cn_msg *. struct cn_msg { - struct cb_id id; + struct cb_id id; __u32 seq; __u32 ack; @@ -55,92 +55,95 @@ Connector interfaces. int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *)); -Registers new callback with connector core. + Registers new callback with connector core. -struct cb_id *id - unique connector's user identifier. - It must be registered in connector.h for legal in-kernel users. -char *name - connector's callback symbolic name. -void (*callback) (void *) - connector's callback. + struct cb_id *id - unique connector's user identifier. + It must be registered in connector.h for legal in-kernel users. + char *name - connector's callback symbolic name. + void (*callback) (void *) - connector's callback. Argument must be dereferenced to struct cn_msg *. + void cn_del_callback(struct cb_id *id); -Unregisters new callback with connector core. + Unregisters new callback with connector core. + + struct cb_id *id - unique connector's user identifier. -struct cb_id *id - unique connector's user identifier. int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask); -Sends message to the specified groups. It can be safely called from -softirq context, but may silently fail under strong memory pressure. -If there are no listeners for given group -ESRCH can be returned. + Sends message to the specified groups. It can be safely called from + softirq context, but may silently fail under strong memory pressure. + If there are no listeners for given group -ESRCH can be returned. -struct cn_msg * - message header(with attached data). -u32 __group - destination group. + struct cn_msg * - message header(with attached data). + u32 __group - destination group. If __group is zero, then appropriate group will be searched through all registered connector users, and message will be delivered to the group which was created for user with the same ID as in msg. If __group is not zero, then message will be delivered to the specified group. -int gfp_mask - GFP mask. + int gfp_mask - GFP mask. -Note: When registering new callback user, connector core assigns -netlink group to the user which is equal to it's id.idx. + Note: When registering new callback user, connector core assigns + netlink group to the user which is equal to it's id.idx. /*****************************************/ Protocol description. /*****************************************/ -Current offers transport layer with fixed header. Recommended -protocol which uses such header is following: +The current framework offers a transport layer with fixed headers. The +recommended protocol which uses such a header is as following: msg->seq and msg->ack are used to determine message genealogy. When -someone sends message it puts there locally unique sequence and random -acknowledge numbers. Sequence number may be copied into +someone sends a message, they use a locally unique sequence and random +acknowledge number. The sequence number may be copied into nlmsghdr->nlmsg_seq too. -Sequence number is incremented with each message to be sent. +The sequence number is incremented with each message sent. -If we expect reply to our message, then sequence number in received -message MUST be the same as in original message, and acknowledge -number MUST be the same + 1. +If you expect a reply to the message, then the sequence number in the +received message MUST be the same as in the original message, and the +acknowledge number MUST be the same + 1. -If we receive message and it's sequence number is not equal to one we -are expecting, then it is new message. If we receive message and it's -sequence number is the same as one we are expecting, but it's -acknowledge is not equal acknowledge number in original message + 1, -then it is new message. +If we receive a message and its sequence number is not equal to one we +are expecting, then it is a new message. If we receive a message and +its sequence number is the same as one we are expecting, but its +acknowledge is not equal to the acknowledge number in the original +message + 1, then it is a new message. -Obviously, protocol header contains above id. +Obviously, the protocol header contains the above id. -connector allows event notification in the following form: kernel +The connector allows event notification in the following form: kernel driver or userspace process can ask connector to notify it when -selected id's will be turned on or off(registered or unregistered it's -callback). It is done by sending special command to connector -driver(it also registers itself with id={-1, -1}). +selected ids will be turned on or off (registered or unregistered its +callback). It is done by sending a special command to the connector +driver (it also registers itself with id={-1, -1}). -As example of usage Documentation/connector now contains cn_test.c - -testing module which uses connector to request notification and to -send messages. +As example of this usage can be found in the cn_test.c module which +uses the connector to request notification and to send messages. /*****************************************/ Reliability. /*****************************************/ -Netlink itself is not reliable protocol, that means that messages can +Netlink itself is not a reliable protocol. That means that messages can be lost due to memory pressure or process' receiving queue overflowed, -so caller is warned must be prepared. That is why struct cn_msg [main -connector's message header] contains u32 seq and u32 ack fields. +so caller is warned that it must be prepared. That is why the struct +cn_msg [main connector's message header] contains u32 seq and u32 ack +fields. /*****************************************/ Userspace usage. /*****************************************/ + 2.6.14 has a new netlink socket implementation, which by default does not -allow to send data to netlink groups other than 1. -So, if to use netlink socket (for example using connector) -with different group number userspace application must subscribe to -that group. It can be achieved by following pseudocode: +allow people to send data to netlink groups other than 1. +So, if you wish to use a netlink socket (for example using connector) +with a different group number, the userspace application must subscribe to +that group first. It can be achieved by the following pseudocode: s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); @@ -160,8 +163,8 @@ if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) { } Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket -option. To drop multicast subscription one should call above socket option -with NETLINK_DROP_MEMBERSHIP parameter which is defined as 0. +option. To drop a multicast subscription, one should call the above socket +option with the NETLINK_DROP_MEMBERSHIP parameter which is defined as 0. 2.6.14 netlink code only allows to select a group which is less or equal to the maximum group number, which is used at netlink_kernel_create() time. -- cgit v1.2.3-70-g09d2 From 37cf2b8d1622897cf57e70cdab9eba57feb5ff6c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 17 Jul 2009 10:14:26 -0700 Subject: connector: get test code working by default The connector test code currently does not work out of the box. This is because it uses a connector id that is above the registered limit. So rather than force people to stumble through undocumented code wondering why it isn't working, have the test code use one of the "private" ids by default. While I'm in here, clean up the code (kernel and user app) so that it's a bit more user friendly and verbose in significant things that it does. Terse test code wastes people time as they simply enumerate it with all the same kind of debug messages to get a better feel of what code is running at any time. Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- Documentation/connector/Makefile | 5 ++++ Documentation/connector/cn_test.c | 31 ++++++++++++-------- Documentation/connector/ucon.c | 62 +++++++++++++++++++++++++++++++++------ 3 files changed, 76 insertions(+), 22 deletions(-) (limited to 'Documentation') diff --git a/Documentation/connector/Makefile b/Documentation/connector/Makefile index 8df1a7285a0..d98e4df98e2 100644 --- a/Documentation/connector/Makefile +++ b/Documentation/connector/Makefile @@ -9,3 +9,8 @@ hostprogs-y := ucon always := $(hostprogs-y) HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include + +all: modules + +modules clean: + $(MAKE) -C ../.. SUBDIRS=$(PWD) $@ diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c index 50d5ce4899c..6e73190af0b 100644 --- a/Documentation/connector/cn_test.c +++ b/Documentation/connector/cn_test.c @@ -19,6 +19,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#define pr_fmt(fmt) "cn_test: " fmt + #include #include #include @@ -27,16 +29,17 @@ #include -static struct cb_id cn_test_id = { 0x123, 0x456 }; +static struct cb_id cn_test_id = { CN_NETLINK_USERS + 3, 0x456 }; static char cn_test_name[] = "cn_test"; static struct sock *nls; static struct timer_list cn_test_timer; -void cn_test_callback(struct cn_msg *msg) +static void cn_test_callback(struct cn_msg *msg) { - printk("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n", - __func__, jiffies, msg->id.idx, msg->id.val, - msg->seq, msg->ack, msg->len, (char *)msg->data); + pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n", + __func__, jiffies, msg->id.idx, msg->id.val, + msg->seq, msg->ack, msg->len, + msg->len ? (char *)msg->data : ""); } /* @@ -61,9 +64,7 @@ static int cn_test_want_notify(void) skb = alloc_skb(size, GFP_ATOMIC); if (!skb) { - printk(KERN_ERR "Failed to allocate new skb with size=%u.\n", - size); - + pr_err("failed to allocate new skb with size=%u\n", size); return -ENOMEM; } @@ -112,12 +113,12 @@ static int cn_test_want_notify(void) //netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC); netlink_unicast(nls, skb, 0, 0); - printk(KERN_INFO "Request was sent. Group=0x%x.\n", ctl->group); + pr_info("request was sent: group=0x%x\n", ctl->group); return 0; nlmsg_failure: - printk(KERN_ERR "Failed to send %u.%u\n", msg->seq, msg->ack); + pr_err("failed to send %u.%u\n", msg->seq, msg->ack); kfree_skb(skb); return -EINVAL; } @@ -129,6 +130,8 @@ static void cn_test_timer_func(unsigned long __data) struct cn_msg *m; char data[32]; + pr_debug("%s: timer fired with data %lu\n", __func__, __data); + m = kzalloc(sizeof(*m) + sizeof(data), GFP_ATOMIC); if (m) { @@ -148,7 +151,7 @@ static void cn_test_timer_func(unsigned long __data) cn_test_timer_counter++; - mod_timer(&cn_test_timer, jiffies + HZ); + mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000)); } static int cn_test_init(void) @@ -166,8 +169,10 @@ static int cn_test_init(void) } setup_timer(&cn_test_timer, cn_test_timer_func, 0); - cn_test_timer.expires = jiffies + HZ; - add_timer(&cn_test_timer); + mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000)); + + pr_info("initialized with id={%u.%u}\n", + cn_test_id.idx, cn_test_id.val); return 0; diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c index d738cde2a8d..a8e4d5885ad 100644 --- a/Documentation/connector/ucon.c +++ b/Documentation/connector/ucon.c @@ -30,18 +30,24 @@ #include +#include #include #include #include #include #include #include +#include #include #define DEBUG #define NETLINK_CONNECTOR 11 +/* Hopefully your userspace connector.h matches this kernel */ +#define CN_TEST_IDX CN_NETLINK_USERS + 3 +#define CN_TEST_VAL 0x456 + #ifdef DEBUG #define ulog(f, a...) fprintf(stdout, f, ##a) #else @@ -83,6 +89,25 @@ static int netlink_send(int s, struct cn_msg *msg) return err; } +static void usage(void) +{ + printf( + "Usage: ucon [options] [output file]\n" + "\n" + "\t-h\tthis help screen\n" + "\t-s\tsend buffers to the test module\n" + "\n" + "The default behavior of ucon is to subscribe to the test module\n" + "and wait for state messages. Any ones received are dumped to the\n" + "specified output file (or stdout). The test module is assumed to\n" + "have an id of {%u.%u}\n" + "\n" + "If you get no output, then verify the cn_test module id matches\n" + "the expected id above.\n" + , CN_TEST_IDX, CN_TEST_VAL + ); +} + int main(int argc, char *argv[]) { int s; @@ -94,17 +119,34 @@ int main(int argc, char *argv[]) FILE *out; time_t tm; struct pollfd pfd; + bool send_msgs = false; - if (argc < 2) - out = stdout; - else { - out = fopen(argv[1], "a+"); + while ((s = getopt(argc, argv, "hs")) != -1) { + switch (s) { + case 's': + send_msgs = true; + break; + + case 'h': + usage(); + return 0; + + default: + /* getopt() outputs an error for us */ + usage(); + return 1; + } + } + + if (argc != optind) { + out = fopen(argv[optind], "a+"); if (!out) { ulog("Unable to open %s for writing: %s\n", argv[1], strerror(errno)); out = stdout; } - } + } else + out = stdout; memset(buf, 0, sizeof(buf)); @@ -115,9 +157,11 @@ int main(int argc, char *argv[]) } l_local.nl_family = AF_NETLINK; - l_local.nl_groups = 0x123; /* bitmask of requested groups */ + l_local.nl_groups = -1; /* bitmask of requested groups */ l_local.nl_pid = 0; + ulog("subscribing to %u.%u\n", CN_TEST_IDX, CN_TEST_VAL); + if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) { perror("bind"); close(s); @@ -130,15 +174,15 @@ int main(int argc, char *argv[]) setsockopt(s, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &on, sizeof(on)); } #endif - if (0) { + if (send_msgs) { int i, j; memset(buf, 0, sizeof(buf)); data = (struct cn_msg *)buf; - data->id.idx = 0x123; - data->id.val = 0x456; + data->id.idx = CN_TEST_IDX; + data->id.val = CN_TEST_VAL; data->seq = seq++; data->ack = 0; data->len = 0; -- cgit v1.2.3-70-g09d2 From 3162534069597e34dd0ac9eb711be8dc23835ae7 Mon Sep 17 00:00:00 2001 From: Joseph Cihula Date: Tue, 30 Jun 2009 19:30:59 -0700 Subject: x86, intel_txt: Intel TXT boot support This patch adds kernel configuration and boot support for Intel Trusted Execution Technology (Intel TXT). Intel's technology for safer computing, Intel Trusted Execution Technology (Intel TXT), defines platform-level enhancements that provide the building blocks for creating trusted platforms. Intel TXT was formerly known by the code name LaGrande Technology (LT). Intel TXT in Brief: o Provides dynamic root of trust for measurement (DRTM) o Data protection in case of improper shutdown o Measurement and verification of launched environment Intel TXT is part of the vPro(TM) brand and is also available some non-vPro systems. It is currently available on desktop systems based on the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell Optiplex 755, HP dc7800, etc.) and mobile systems based on the GM45, PM45, and GS45 Express chipsets. For more information, see http://www.intel.com/technology/security/. This site also has a link to the Intel TXT MLE Developers Manual, which has been updated for the new released platforms. A much more complete description of how these patches support TXT, how to configure a system for it, etc. is in the Documentation/intel_txt.txt file in this patch. This patch provides the TXT support routines for complete functionality, documentation for TXT support and for the changes to the boot_params structure, and boot detection of a TXT launch. Attempts to shutdown (reboot, Sx) the system will result in platform resets; subsequent patches will support these shutdown modes properly. Documentation/intel_txt.txt | 210 +++++++++++++++++++++ Documentation/x86/zero-page.txt | 1 arch/x86/include/asm/bootparam.h | 3 arch/x86/include/asm/fixmap.h | 3 arch/x86/include/asm/tboot.h | 197 ++++++++++++++++++++ arch/x86/kernel/Makefile | 1 arch/x86/kernel/setup.c | 4 arch/x86/kernel/tboot.c | 379 +++++++++++++++++++++++++++++++++++++++ security/Kconfig | 30 +++ 9 files changed, 827 insertions(+), 1 deletion(-) Signed-off-by: Joseph Cihula Signed-off-by: Shane Wang Signed-off-by: Gang Wei Signed-off-by: H. Peter Anvin --- Documentation/intel_txt.txt | 210 ++++++++++++++++++++++ Documentation/x86/zero-page.txt | 1 + arch/x86/include/asm/bootparam.h | 3 +- arch/x86/include/asm/fixmap.h | 3 + arch/x86/include/asm/tboot.h | 197 ++++++++++++++++++++ arch/x86/kernel/Makefile | 1 + arch/x86/kernel/setup.c | 4 + arch/x86/kernel/tboot.c | 379 +++++++++++++++++++++++++++++++++++++++ security/Kconfig | 30 ++++ 9 files changed, 827 insertions(+), 1 deletion(-) create mode 100644 Documentation/intel_txt.txt create mode 100644 arch/x86/include/asm/tboot.h create mode 100644 arch/x86/kernel/tboot.c (limited to 'Documentation') diff --git a/Documentation/intel_txt.txt b/Documentation/intel_txt.txt new file mode 100644 index 00000000000..f40a1f03001 --- /dev/null +++ b/Documentation/intel_txt.txt @@ -0,0 +1,210 @@ +Intel(R) TXT Overview: +===================== + +Intel's technology for safer computing, Intel(R) Trusted Execution +Technology (Intel(R) TXT), defines platform-level enhancements that +provide the building blocks for creating trusted platforms. + +Intel TXT was formerly known by the code name LaGrande Technology (LT). + +Intel TXT in Brief: +o Provides dynamic root of trust for measurement (DRTM) +o Data protection in case of improper shutdown +o Measurement and verification of launched environment + +Intel TXT is part of the vPro(TM) brand and is also available some +non-vPro systems. It is currently available on desktop systems +based on the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell +Optiplex 755, HP dc7800, etc.) and mobile systems based on the GM45, +PM45, and GS45 Express chipsets. + +For more information, see http://www.intel.com/technology/security/. +This site also has a link to the Intel TXT MLE Developers Manual, +which has been updated for the new released platforms. + +Intel TXT has been presented at various events over the past few +years, some of which are: + LinuxTAG 2008: + http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag/ + details.html?talkid=110 + TRUST2008: + http://www.trust2008.eu/downloads/Keynote-Speakers/ + 3_David-Grawrock_The-Front-Door-of-Trusted-Computing.pdf + IDF 2008, Shanghai: + http://inteldeveloperforum.com.edgesuite.net/shanghai_2008/ + aep/PROS003/index.html + IDFs 2006, 2007 (I'm not sure if/where they are online) + +Trusted Boot Project Overview: +============================= + +Trusted Boot (tboot) is an open source, pre- kernel/VMM module that +uses Intel TXT to perform a measured and verified launch of an OS +kernel/VMM. + +It is hosted on SourceForge at http://sourceforge.net/projects/tboot. +The mercurial source repo is available at http://www.bughost.org/ +repos.hg/tboot.hg. + +Tboot currently supports launching Xen (open source VMM/hypervisor +w/ TXT support since v3.2), and now Linux kernels. + + +Value Proposition for Linux or "Why should you care?" +===================================================== + +While there are many products and technologies that attempt to +measure or protect the integrity of a running kernel, they all +assume the kernel is "good" to begin with. The Integrity +Measurement Architecture (IMA) and Linux Integrity Module interface +are examples of such solutions. + +To get trust in the initial kernel without using Intel TXT, a +static root of trust must be used. This bases trust in BIOS +starting at system reset and requires measurement of all code +executed between system reset through the completion of the kernel +boot as well as data objects used by that code. In the case of a +Linux kernel, this means all of BIOS, any option ROMs, the +bootloader and the boot config. In practice, this is a lot of +code/data, much of which is subject to change from boot to boot +(e.g. changing NICs may change option ROMs). Without reference +hashes, these measurement changes are difficult to assess or +confirm as benign. This process also does not provide DMA +protection, memory configuration/alias checks and locks, crash +protection, or policy support. + +By using the hardware-based root of trust that Intel TXT provides, +many of these issues can be mitigated. Specifically: many +pre-launch components can be removed from the trust chain, DMA +protection is provided to all launched components, a large number +of platform configuration checks are performed and values locked, +protection is provided for any data in the event of an improper +shutdown, and there is support for policy-based execution/verification. +This provides a more stable measurement and a higher assurance of +system configuration and initial state than would be otherwise +possible. Since the tboot project is open source, source code for +almost all parts of the trust chain is available (excepting SMM and +Intel-provided firmware). + +How Does it Work? +================= + +o Tboot is an executable that is launched by the bootloader as + the "kernel" (the binary the bootloader executes). +o It performs all of the work necessary to determine if the + platform supports Intel TXT and, if so, executes the GETSEC[SENTER] + processor instruction that initiates the dynamic root of trust. + - If tboot determines that the system does not support Intel TXT + or is not configured correctly (e.g. the SINIT AC Module was + incorrect), it will directly launch the kernel with no changes + to any state. + - Tboot will output various information about its progress to the + terminal, serial port, and/or an in-memory log; the output + locations can be configured with a command line switch. +o The GETSEC[SENTER] instruction will return control to tboot and + tboot then verifies certain aspects of the environment (e.g. TPM NV + lock, e820 table does not have invalid entries, etc.). +o It will wake the APs from the special sleep state the GETSEC[SENTER] + instruction had put them in and place them into a wait-for-SIPI + state. + - Because the processors will not respond to an INIT or SIPI when + in the TXT environment, it is necessary to create a small VT-x + guest for the APs. When they run in this guest, they will + simply wait for the INIT-SIPI-SIPI sequence, which will cause + VMEXITs, and then disable VT and jump to the SIPI vector. This + approach seemed like a better choice than having to insert + special code into the kernel's MP wakeup sequence. +o Tboot then applies an (optional) user-defined launch policy to + verify the kernel and initrd. + - This policy is rooted in TPM NV and is described in the tboot + project. The tboot project also contains code for tools to + create and provision the policy. + - Policies are completely under user control and if not present + then any kernel will be launched. + - Policy action is flexible and can include halting on failures + or simply logging them and continuing. +o Tboot adjusts the e820 table provided by the bootloader to reserve + its own location in memory as well as to reserve certain other + TXT-related regions. +o As part of it's launch, tboot DMA protects all of RAM (using the + VT-d PMRs). Thus, the kernel must be booted with 'intel_iommu=on' + in order to remove this blanket protection and use VT-d's + page-level protection. +o Tboot will populate a shared page with some data about itself and + pass this to the Linux kernel as it transfers control. + - The location of the shared page is passed via the boot_params + struct as a physical address. +o The kernel will look for the tboot shared page address and, if it + exists, map it. +o As one of the checks/protections provided by TXT, it makes a copy + of the VT-d DMARs in a DMA-protected region of memory and verifies + them for correctness. The VT-d code will detect if the kernel was + launched with tboot and use this copy instead of the one in the + ACPI table. +o At this point, tboot and TXT are out of the picture until a + shutdown (S) +o In order to put a system into any of the sleep states after a TXT + launch, TXT must first be exited. This is to prevent attacks that + attempt to crash the system to gain control on reboot and steal + data left in memory. + - The kernel will perform all of its sleep preparation and + populate the shared page with the ACPI data needed to put the + platform in the desired sleep state. + - Then the kernel jumps into tboot via the vector specified in the + shared page. + - Tboot will clean up the environment and disable TXT, then use the + kernel-provided ACPI information to actually place the platform + into the desired sleep state. + - In the case of S3, tboot will also register itself as the resume + vector. This is necessary because it must re-establish the + measured environment upon resume. Once the TXT environment + has been restored, it will restore the TPM PCRs and then + transfer control back to the kernel's S3 resume vector. + In order to preserve system integrity across S3, the kernel + provides tboot with a set of memory ranges (kernel + code/data/bss, S3 resume code, and AP trampoline) that tboot + will calculate a MAC (message authentication code) over and then + seal with the TPM. On resume and once the measured environment + has been re-established, tboot will re-calculate the MAC and + verify it against the sealed value. Tboot's policy determines + what happens if the verification fails. + +That's pretty much it for TXT support. + + +Configuring the System: +====================== + +This code works with 32bit, 32bit PAE, and 64bit (x86_64) kernels. + +In BIOS, the user must enable: TPM, TXT, VT-x, VT-d. Not all BIOSes +allow these to be individually enabled/disabled and the screens in +which to find them are BIOS-specific. + +grub.conf needs to be modified as follows: + title Linux 2.6.29-tip w/ tboot + root (hd0,0) + kernel /tboot.gz logging=serial,vga,memory + module /vmlinuz-2.6.29-tip intel_iommu=on ro + root=LABEL=/ rhgb console=ttyS0,115200 3 + module /initrd-2.6.29-tip.img + module /Q35_SINIT_17.BIN + +The kernel option for enabling Intel TXT support is found under the +Security top-level menu and is called "Enable Intel(R) Trusted +Execution Technology (TXT)". It is marked as EXPERIMENTAL and +depends on the generic x86 support (to allow maximum flexibility in +kernel build options), since the tboot code will detect whether the +platform actually supports Intel TXT and thus whether any of the +kernel code is executed. + +The Q35_SINIT_17.BIN file is what Intel TXT refers to as an +Authenticated Code Module. It is specific to the chipset in the +system and can also be found on the Trusted Boot site. It is an +(unencrypted) module signed by Intel that is used as part of the +DRTM process to verify and configure the system. It is signed +because it operates at a higher privilege level in the system than +any other macrocode and its correct operation is critical to the +establishment of the DRTM. The process for determining the correct +SINIT ACM for a system is documented in the SINIT-guide.txt file +that is on the tboot SourceForge site under the SINIT ACM downloads. diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt index 4f913857b8a..feb37e17701 100644 --- a/Documentation/x86/zero-page.txt +++ b/Documentation/x86/zero-page.txt @@ -12,6 +12,7 @@ Offset Proto Name Meaning 000/040 ALL screen_info Text mode or frame buffer information (struct screen_info) 040/014 ALL apm_bios_info APM BIOS information (struct apm_bios_info) +058/008 ALL tboot_addr Physical address of tboot shared page 060/010 ALL ist_info Intel SpeedStep (IST) BIOS support information (struct ist_info) 080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!! diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index 1724e8de317..6ca20218dd7 100644 --- a/arch/x86/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h @@ -85,7 +85,8 @@ struct efi_info { struct boot_params { struct screen_info screen_info; /* 0x000 */ struct apm_bios_info apm_bios_info; /* 0x040 */ - __u8 _pad2[12]; /* 0x054 */ + __u8 _pad2[4]; /* 0x054 */ + __u64 tboot_addr; /* 0x058 */ struct ist_info ist_info; /* 0x060 */ __u8 _pad3[16]; /* 0x070 */ __u8 hd0_info[16]; /* obsolete! */ /* 0x080 */ diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 7b2d71df39a..14f9890eb49 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -131,6 +131,9 @@ enum fixed_addresses { #endif #ifdef CONFIG_X86_32 FIX_WP_TEST, +#endif +#ifdef CONFIG_INTEL_TXT + FIX_TBOOT_BASE, #endif __end_of_fixed_addresses }; diff --git a/arch/x86/include/asm/tboot.h b/arch/x86/include/asm/tboot.h new file mode 100644 index 00000000000..b13929d4e5f --- /dev/null +++ b/arch/x86/include/asm/tboot.h @@ -0,0 +1,197 @@ +/* + * tboot.h: shared data structure with tboot and kernel and functions + * used by kernel for runtime support of Intel(R) Trusted + * Execution Technology + * + * Copyright (c) 2006-2009, Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef _ASM_TBOOT_H +#define _ASM_TBOOT_H + +#include + +/* these must have the values from 0-5 in this order */ +enum { + TB_SHUTDOWN_REBOOT = 0, + TB_SHUTDOWN_S5, + TB_SHUTDOWN_S4, + TB_SHUTDOWN_S3, + TB_SHUTDOWN_HALT, + TB_SHUTDOWN_WFS +}; + +#ifdef CONFIG_INTEL_TXT + +/* used to communicate between tboot and the launched kernel */ + +#define TB_KEY_SIZE 64 /* 512 bits */ + +#define MAX_TB_MAC_REGIONS 32 + +struct tboot_mac_region { + u64 start; /* must be 64 byte -aligned */ + u32 size; /* must be 64 byte -granular */ +} __packed; + +/* GAS - Generic Address Structure (ACPI 2.0+) */ +struct tboot_acpi_generic_address { + u8 space_id; + u8 bit_width; + u8 bit_offset; + u8 access_width; + u64 address; +} __packed; + +/* + * combines Sx info from FADT and FACS tables per ACPI 2.0+ spec + * (http://www.acpi.info/) + */ +struct tboot_acpi_sleep_info { + struct tboot_acpi_generic_address pm1a_cnt_blk; + struct tboot_acpi_generic_address pm1b_cnt_blk; + struct tboot_acpi_generic_address pm1a_evt_blk; + struct tboot_acpi_generic_address pm1b_evt_blk; + u16 pm1a_cnt_val; + u16 pm1b_cnt_val; + u64 wakeup_vector; + u32 vector_width; + u64 kernel_s3_resume_vector; +} __packed; + +/* + * shared memory page used for communication between tboot and kernel + */ +struct tboot { + /* + * version 3+ fields: + */ + + /* TBOOT_UUID */ + u8 uuid[16]; + + /* version number: 5 is current */ + u32 version; + + /* physical addr of tb_log_t log */ + u32 log_addr; + + /* + * physical addr of entry point for tboot shutdown and + * type of shutdown (TB_SHUTDOWN_*) being requested + */ + u32 shutdown_entry; + u32 shutdown_type; + + /* kernel-specified ACPI info for Sx shutdown */ + struct tboot_acpi_sleep_info acpi_sinfo; + + /* tboot location in memory (physical) */ + u32 tboot_base; + u32 tboot_size; + + /* memory regions (phys addrs) for tboot to MAC on S3 */ + u8 num_mac_regions; + struct tboot_mac_region mac_regions[MAX_TB_MAC_REGIONS]; + + + /* + * version 4+ fields: + */ + + /* symmetric key for use by kernel; will be encrypted on S3 */ + u8 s3_key[TB_KEY_SIZE]; + + + /* + * version 5+ fields: + */ + + /* used to 4byte-align num_in_wfs */ + u8 reserved_align[3]; + + /* number of processors in wait-for-SIPI */ + u32 num_in_wfs; +} __packed; + +/* + * UUID for tboot data struct to facilitate matching + * defined as {663C8DFF-E8B3-4b82-AABF-19EA4D057A08} by tboot, which is + * represented as {} in the char array used here + */ +#define TBOOT_UUID {0xff, 0x8d, 0x3c, 0x66, 0xb3, 0xe8, 0x82, 0x4b, 0xbf,\ + 0xaa, 0x19, 0xea, 0x4d, 0x5, 0x7a, 0x8} + +extern struct tboot *tboot; + +static inline int tboot_enabled(void) +{ + return tboot != NULL; +} + +extern void tboot_probe(void); +extern void tboot_create_trampoline(void); +extern void tboot_shutdown(u32 shutdown_type); +extern void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control); +extern int tboot_wait_for_aps(int num_aps); +extern struct acpi_table_header *tboot_get_dmar_table( + struct acpi_table_header *dmar_tbl); +extern int tboot_force_iommu(void); + +#else /* CONFIG_INTEL_TXT */ + +static inline int tboot_enabled(void) +{ + return 0; +} + +static inline void tboot_probe(void) +{ +} + +static inline void tboot_create_trampoline(void) +{ +} + +static inline void tboot_shutdown(u32 shutdown_type) +{ +} + +static inline void tboot_sleep(u8 sleep_state, u32 pm1a_control, + u32 pm1b_control) +{ +} + +static inline int tboot_wait_for_aps(int num_aps) +{ + return 0; +} + +static inline struct acpi_table_header *tboot_get_dmar_table( + struct acpi_table_header *dmar_tbl) +{ + return dmar_tbl; +} + +static inline int tboot_force_iommu(void) +{ + return 0; +} + +#endif /* !CONFIG_INTEL_TXT */ + +#endif /* _ASM_TBOOT_H */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 430d5b24af7..832cb838cb4 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_X86_DS_SELFTEST) += ds_selftest.o obj-$(CONFIG_X86_32) += tls.o obj-$(CONFIG_IA32_EMULATION) += tls.o obj-y += step.o +obj-$(CONFIG_INTEL_TXT) += tboot.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-y += cpu/ obj-y += acpi/ diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index de2cab13284..80d6e9e3248 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -145,6 +145,8 @@ struct boot_params __initdata boot_params; struct boot_params boot_params; #endif +#include + /* * Machine setup.. */ @@ -964,6 +966,8 @@ void __init setup_arch(char **cmdline_p) paravirt_pagetable_setup_done(swapper_pg_dir); paravirt_post_allocator_init(); + tboot_probe(); + #ifdef CONFIG_X86_64 map_vsyscall(); #endif diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c new file mode 100644 index 00000000000..263591afd29 --- /dev/null +++ b/arch/x86/kernel/tboot.c @@ -0,0 +1,379 @@ +/* + * tboot.c: main implementation of helper functions used by kernel for + * runtime support of Intel(R) Trusted Execution Technology + * + * Copyright (c) 2006-2009, Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "acpi/realmode/wakeup.h" + +/* Global pointer to shared data; NULL means no measured launch. */ +struct tboot *tboot __read_mostly; + +/* timeout for APs (in secs) to enter wait-for-SIPI state during shutdown */ +#define AP_WAIT_TIMEOUT 1 + +#undef pr_fmt +#define pr_fmt(fmt) "tboot: " fmt + +static u8 tboot_uuid[16] __initdata = TBOOT_UUID; + +void __init tboot_probe(void) +{ + /* Look for valid page-aligned address for shared page. */ + if (!boot_params.tboot_addr) + return; + /* + * also verify that it is mapped as we expect it before calling + * set_fixmap(), to reduce chance of garbage value causing crash + */ + if (!e820_any_mapped(boot_params.tboot_addr, + boot_params.tboot_addr, E820_RESERVED)) { + pr_warning("non-0 tboot_addr but it is not of type E820_RESERVED\n"); + return; + } + + /* only a natively booted kernel should be using TXT */ + if (paravirt_enabled()) { + pr_warning("non-0 tboot_addr but pv_ops is enabled\n"); + return; + } + + /* Map and check for tboot UUID. */ + set_fixmap(FIX_TBOOT_BASE, boot_params.tboot_addr); + tboot = (struct tboot *)fix_to_virt(FIX_TBOOT_BASE); + if (memcmp(&tboot_uuid, &tboot->uuid, sizeof(tboot->uuid))) { + pr_warning("tboot at 0x%llx is invalid\n", + boot_params.tboot_addr); + tboot = NULL; + return; + } + if (tboot->version < 5) { + pr_warning("tboot version is invalid: %u\n", tboot->version); + tboot = NULL; + return; + } + + pr_info("found shared page at phys addr 0x%llx:\n", + boot_params.tboot_addr); + pr_debug("version: %d\n", tboot->version); + pr_debug("log_addr: 0x%08x\n", tboot->log_addr); + pr_debug("shutdown_entry: 0x%x\n", tboot->shutdown_entry); + pr_debug("tboot_base: 0x%08x\n", tboot->tboot_base); + pr_debug("tboot_size: 0x%x\n", tboot->tboot_size); +} + +static pgd_t *tboot_pg_dir; +static struct mm_struct tboot_mm = { + .mm_rb = RB_ROOT, + .pgd = swapper_pg_dir, + .mm_users = ATOMIC_INIT(2), + .mm_count = ATOMIC_INIT(1), + .mmap_sem = __RWSEM_INITIALIZER(init_mm.mmap_sem), + .page_table_lock = __SPIN_LOCK_UNLOCKED(init_mm.page_table_lock), + .mmlist = LIST_HEAD_INIT(init_mm.mmlist), + .cpu_vm_mask = CPU_MASK_ALL, +}; + +static inline void switch_to_tboot_pt(void) +{ + write_cr3(virt_to_phys(tboot_pg_dir)); +} + +static int map_tboot_page(unsigned long vaddr, unsigned long pfn, + pgprot_t prot) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + + pgd = pgd_offset(&tboot_mm, vaddr); + pud = pud_alloc(&tboot_mm, pgd, vaddr); + if (!pud) + return -1; + pmd = pmd_alloc(&tboot_mm, pud, vaddr); + if (!pmd) + return -1; + pte = pte_alloc_map(&tboot_mm, pmd, vaddr); + if (!pte) + return -1; + set_pte_at(&tboot_mm, vaddr, pte, pfn_pte(pfn, prot)); + pte_unmap(pte); + return 0; +} + +static int map_tboot_pages(unsigned long vaddr, unsigned long start_pfn, + unsigned long nr) +{ + /* Reuse the original kernel mapping */ + tboot_pg_dir = pgd_alloc(&tboot_mm); + if (!tboot_pg_dir) + return -1; + + for (; nr > 0; nr--, vaddr += PAGE_SIZE, start_pfn++) { + if (map_tboot_page(vaddr, start_pfn, PAGE_KERNEL_EXEC)) + return -1; + } + + return 0; +} + +void tboot_create_trampoline(void) +{ + u32 map_base, map_size; + + if (!tboot_enabled()) + return; + + /* Create identity map for tboot shutdown code. */ + map_base = PFN_DOWN(tboot->tboot_base); + map_size = PFN_UP(tboot->tboot_size); + if (map_tboot_pages(map_base << PAGE_SHIFT, map_base, map_size)) + panic("tboot: Error mapping tboot pages (mfns) @ 0x%x, 0x%x\n", map_base, map_size); +} + +static void set_mac_regions(void) +{ + tboot->num_mac_regions = 3; + /* S3 resume code */ + tboot->mac_regions[0].start = PFN_PHYS(PFN_DOWN(acpi_wakeup_address)); + tboot->mac_regions[0].size = PFN_UP(WAKEUP_SIZE) << PAGE_SHIFT; + /* AP trampoline code */ + tboot->mac_regions[1].start = + PFN_PHYS(PFN_DOWN(virt_to_phys(trampoline_base))); + tboot->mac_regions[1].size = PFN_UP(TRAMPOLINE_SIZE) << PAGE_SHIFT; + /* kernel code + data + bss */ + tboot->mac_regions[2].start = PFN_PHYS(PFN_DOWN(virt_to_phys(&_text))); + tboot->mac_regions[2].size = PFN_PHYS(PFN_UP(virt_to_phys(&_end))) - + PFN_PHYS(PFN_DOWN(virt_to_phys(&_text))); +} + +void tboot_shutdown(u32 shutdown_type) +{ + void (*shutdown)(void); + + if (!tboot_enabled()) + return; + + /* + * if we're being called before the 1:1 mapping is set up then just + * return and let the normal shutdown happen; this should only be + * due to very early panic() + */ + if (!tboot_pg_dir) + return; + + /* if this is S3 then set regions to MAC */ + if (shutdown_type == TB_SHUTDOWN_S3) + set_mac_regions(); + + tboot->shutdown_type = shutdown_type; + + switch_to_tboot_pt(); + + shutdown = (void(*)(void))(unsigned long)tboot->shutdown_entry; + shutdown(); + + /* should not reach here */ + while (1) + halt(); +} + +static void tboot_copy_fadt(const struct acpi_table_fadt *fadt) +{ +#define TB_COPY_GAS(tbg, g) \ + tbg.space_id = g.space_id; \ + tbg.bit_width = g.bit_width; \ + tbg.bit_offset = g.bit_offset; \ + tbg.access_width = g.access_width; \ + tbg.address = g.address; + + TB_COPY_GAS(tboot->acpi_sinfo.pm1a_cnt_blk, fadt->xpm1a_control_block); + TB_COPY_GAS(tboot->acpi_sinfo.pm1b_cnt_blk, fadt->xpm1b_control_block); + TB_COPY_GAS(tboot->acpi_sinfo.pm1a_evt_blk, fadt->xpm1a_event_block); + TB_COPY_GAS(tboot->acpi_sinfo.pm1b_evt_blk, fadt->xpm1b_event_block); + + /* + * We need phys addr of waking vector, but can't use virt_to_phys() on + * &acpi_gbl_FACS because it is ioremap'ed, so calc from FACS phys + * addr. + */ + tboot->acpi_sinfo.wakeup_vector = fadt->facs + + offsetof(struct acpi_table_facs, firmware_waking_vector); +} + +void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control) +{ + static u32 acpi_shutdown_map[ACPI_S_STATE_COUNT] = { + /* S0,1,2: */ -1, -1, -1, + /* S3: */ TB_SHUTDOWN_S3, + /* S4: */ TB_SHUTDOWN_S4, + /* S5: */ TB_SHUTDOWN_S5 }; + + if (!tboot_enabled()) + return; + + tboot_copy_fadt(&acpi_gbl_FADT); + tboot->acpi_sinfo.pm1a_cnt_val = pm1a_control; + tboot->acpi_sinfo.pm1b_cnt_val = pm1b_control; + /* we always use the 32b wakeup vector */ + tboot->acpi_sinfo.vector_width = 32; + tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address; + + if (sleep_state >= ACPI_S_STATE_COUNT || + acpi_shutdown_map[sleep_state] == -1) { + pr_warning("unsupported sleep state 0x%x\n", sleep_state); + return; + } + + tboot_shutdown(acpi_shutdown_map[sleep_state]); +} + +int tboot_wait_for_aps(int num_aps) +{ + unsigned long timeout; + + if (!tboot_enabled()) + return 0; + + timeout = jiffies + AP_WAIT_TIMEOUT*HZ; + while (atomic_read((atomic_t *)&tboot->num_in_wfs) != num_aps && + time_before(jiffies, timeout)) + cpu_relax(); + + return time_before(jiffies, timeout) ? 0 : 1; +} + +/* + * TXT configuration registers (offsets from TXT_{PUB, PRIV}_CONFIG_REGS_BASE) + */ + +#define TXT_PUB_CONFIG_REGS_BASE 0xfed30000 +#define TXT_PRIV_CONFIG_REGS_BASE 0xfed20000 + +/* # pages for each config regs space - used by fixmap */ +#define NR_TXT_CONFIG_PAGES ((TXT_PUB_CONFIG_REGS_BASE - \ + TXT_PRIV_CONFIG_REGS_BASE) >> PAGE_SHIFT) + +/* offsets from pub/priv config space */ +#define TXTCR_HEAP_BASE 0x0300 +#define TXTCR_HEAP_SIZE 0x0308 + +#define SHA1_SIZE 20 + +struct sha1_hash { + u8 hash[SHA1_SIZE]; +}; + +struct sinit_mle_data { + u32 version; /* currently 6 */ + struct sha1_hash bios_acm_id; + u32 edx_senter_flags; + u64 mseg_valid; + struct sha1_hash sinit_hash; + struct sha1_hash mle_hash; + struct sha1_hash stm_hash; + struct sha1_hash lcp_policy_hash; + u32 lcp_policy_control; + u32 rlp_wakeup_addr; + u32 reserved; + u32 num_mdrs; + u32 mdrs_off; + u32 num_vtd_dmars; + u32 vtd_dmars_off; +} __packed; + +struct acpi_table_header *tboot_get_dmar_table(struct acpi_table_header *dmar_tbl) +{ + void *heap_base, *heap_ptr, *config; + + if (!tboot_enabled()) + return dmar_tbl; + + /* + * ACPI tables may not be DMA protected by tboot, so use DMAR copy + * SINIT saved in SinitMleData in TXT heap (which is DMA protected) + */ + + /* map config space in order to get heap addr */ + config = ioremap(TXT_PUB_CONFIG_REGS_BASE, NR_TXT_CONFIG_PAGES * + PAGE_SIZE); + if (!config) + return NULL; + + /* now map TXT heap */ + heap_base = ioremap(*(u64 *)(config + TXTCR_HEAP_BASE), + *(u64 *)(config + TXTCR_HEAP_SIZE)); + iounmap(config); + if (!heap_base) + return NULL; + + /* walk heap to SinitMleData */ + /* skip BiosData */ + heap_ptr = heap_base + *(u64 *)heap_base; + /* skip OsMleData */ + heap_ptr += *(u64 *)heap_ptr; + /* skip OsSinitData */ + heap_ptr += *(u64 *)heap_ptr; + /* now points to SinitMleDataSize; set to SinitMleData */ + heap_ptr += sizeof(u64); + /* get addr of DMAR table */ + dmar_tbl = (struct acpi_table_header *)(heap_ptr + + ((struct sinit_mle_data *)heap_ptr)->vtd_dmars_off - + sizeof(u64)); + + /* don't unmap heap because dmar.c needs access to this */ + + return dmar_tbl; +} + +int tboot_force_iommu(void) +{ + if (!tboot_enabled()) + return 0; + + if (no_iommu || swiotlb || dmar_disabled) + pr_warning("Forcing Intel-IOMMU to enabled\n"); + + dmar_disabled = 0; +#ifdef CONFIG_SWIOTLB + swiotlb = 0; +#endif + no_iommu = 0; + + return 1; +} diff --git a/security/Kconfig b/security/Kconfig index d23c839038f..edc7cbdc012 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -113,6 +113,36 @@ config SECURITY_ROOTPLUG If you are unsure how to answer this question, answer N. +config INTEL_TXT + bool "Enable Intel(R) Trusted Execution Technology (Intel(R) TXT)" + depends on EXPERIMENTAL && X86 && DMAR && ACPI + help + This option enables support for booting the kernel with the + Trusted Boot (tboot) module. This will utilize + Intel(R) Trusted Execution Technology to perform a measured launch + of the kernel. If the system does not support Intel(R) TXT, this + will have no effect. + + Intel TXT will provide higher assurance of sysem configuration and + initial state as well as data reset protection. This is used to + create a robust initial kernel measurement and verification, which + helps to ensure that kernel security mechanisms are functioning + correctly. This level of protection requires a root of trust outside + of the kernel itself. + + Intel TXT also helps solve real end user concerns about having + confidence that their hardware is running the VMM or kernel that + it was conigured with, especially since they may be responsible for + providing such assurances to VMs and services running on it. + + See for more information + about Intel(R) TXT. + See for more information about tboot. + See Documentation/intel_txt.txt for a description of how to enable + Intel TXT support in a kernel boot. + + If you are unsure as to whether this is required, answer N. + source security/selinux/Kconfig source security/smack/Kconfig source security/tomoyo/Kconfig -- cgit v1.2.3-70-g09d2 From b5d6f93b92a37466b43ba105f524bdf046d3bb3c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 23 Jul 2009 12:25:40 +0200 Subject: ALSA: hda - Add description of new models for ALC889/889A Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index a1895d7f3cf..4c95a6c3f79 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -155,6 +155,8 @@ ALC882/883/885/888/889 fujitsu-pi2515 Fujitsu AMILO Pi2515 fujitsu-xa3530 Fujitsu AMILO XA3530 3stack-6ch-intel Intel DG33* boards + intel-alc889a Intel IbexPeak with ALC889A + intel-x58 Intel DX58 with ALC889 asus-p5q ASUS P5Q-EM boards mb31 MacBook 3,1 sony-vaio-tt Sony VAIO TT -- cgit v1.2.3-70-g09d2 From 987b8816661332978efd0f85bedf9866fe2e3232 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Sun, 26 Jul 2009 12:34:40 -0300 Subject: trivial: fix typo in ieee802154 documentation and add it to index Signed-off-by: Thadeu Lima de Souza Cascardo --- Documentation/networking/00-INDEX | 2 ++ Documentation/networking/ieee802154.txt | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 1634c6dceca..50189bf07d5 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -60,6 +60,8 @@ framerelay.txt - info on using Frame Relay/Data Link Connection Identifier (DLCI). generic_netlink.txt - info on Generic Netlink +ieee802154.txt + - Linux IEEE 802.15.4 implementation, API and drivers ip-sysctl.txt - /proc/sys/net/ipv4/* variables ip_dynaddr.txt diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt index a0280ad2edc..1d4ed66b1b1 100644 --- a/Documentation/networking/ieee802154.txt +++ b/Documentation/networking/ieee802154.txt @@ -69,7 +69,7 @@ We provide an example of simple HardMAC driver at drivers/ieee802154/fakehard.c SoftMAC ======= -We are going to provide intermediate layer impelementing IEEE 802.15.4 MAC +We are going to provide intermediate layer implementing IEEE 802.15.4 MAC in software. This is currently WIP. See header include/net/ieee802154/mac802154.h and several drivers in -- cgit v1.2.3-70-g09d2 From 9a11f1aa8e14798037d0c9ac134696fa3af6eb2a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 28 Jul 2009 16:01:20 +0200 Subject: ALSA: hda - Reword information messages for BIOS auto-probing mode The sentense "Unknown model for xxx, ..." makes people too nervous and drives them to a direction to a wrong "fix" by giving any mismatching model option. Let's rephrase the messages to be more nice and easy (at least that won't make people suspect conspiracies). Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 4 ++++ sound/pci/hda/patch_analog.c | 3 ++- sound/pci/hda/patch_cmedia.c | 3 ++- sound/pci/hda/patch_realtek.c | 34 ++++++++++++++++------------------ sound/pci/hda/patch_sigmatel.c | 34 ++++++++++++++++++---------------- 5 files changed, 42 insertions(+), 36 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 0b5b480708f..7b8a5f947d1 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -138,6 +138,10 @@ override the BIOS setup or to provide more comprehensive features. The driver checks PCI SSID and looks through the static configuration table until any matching entry is found. If you have a new machine, you may see a message like below: +------------------------------------------------------------------------ + hda_codec: ALC880: BIOS auto-probing. +------------------------------------------------------------------------ +Meanwhile, in the earlier versions, you would see a message like: ------------------------------------------------------------------------ hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... ------------------------------------------------------------------------ diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 3da85caf8af..ab3bcb78ace 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -2982,7 +2982,8 @@ static int patch_ad1988(struct hda_codec *codec) board_config = snd_hda_check_board_config(codec, AD1988_MODEL_LAST, ad1988_models, ad1988_cfg_tbl); if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...\n"); + printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); board_config = AD1988_AUTO; } diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c index c921264bbd7..780e1a72114 100644 --- a/sound/pci/hda/patch_cmedia.c +++ b/sound/pci/hda/patch_cmedia.c @@ -635,7 +635,8 @@ static int patch_cmi9880(struct hda_codec *codec) cmi9880_models, cmi9880_cfg_tbl); if (spec->board_config < 0) { - snd_printdd(KERN_INFO "hda_codec: Unknown model for CMI9880\n"); + snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); spec->board_config = CMI_AUTO; /* try everything */ } diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index df87c01e27d..6794d028119 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4584,8 +4584,8 @@ static int patch_alc880(struct hda_codec *codec) alc880_models, alc880_cfg_tbl); if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for %s, " - "trying auto-probe from BIOS...\n", codec->chip_name); + printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); board_config = ALC880_AUTO; } @@ -6228,8 +6228,7 @@ static int patch_alc260(struct hda_codec *codec) alc260_models, alc260_cfg_tbl); if (board_config < 0) { - snd_printd(KERN_INFO "hda_codec: Unknown model for %s, " - "trying auto-probe from BIOS...\n", + snd_printd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", codec->chip_name); board_config = ALC260_AUTO; } @@ -9526,8 +9525,7 @@ static int patch_alc882(struct hda_codec *codec) ALC882_MODEL_LAST, alc882_models, alc882_ssid_cfg_tbl); if (board_config < 0 || board_config >= ALC882_MODEL_LAST) { - printk(KERN_INFO "hda_codec: Unknown model for %s, " - "trying auto-probe from BIOS...\n", + printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", codec->chip_name); board_config = ALC882_AUTO; } @@ -11406,8 +11404,8 @@ static int patch_alc262(struct hda_codec *codec) alc262_cfg_tbl); if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for %s, " - "trying auto-probe from BIOS...\n", codec->chip_name); + printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); board_config = ALC262_AUTO; } @@ -12479,8 +12477,8 @@ static int patch_alc268(struct hda_codec *codec) alc268_cfg_tbl); if (board_config < 0 || board_config >= ALC268_MODEL_LAST) { - printk(KERN_INFO "hda_codec: Unknown model for %s, " - "trying auto-probe from BIOS...\n", codec->chip_name); + printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); board_config = ALC268_AUTO; } @@ -13297,8 +13295,8 @@ static int patch_alc269(struct hda_codec *codec) alc269_cfg_tbl); if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for %s, " - "trying auto-probe from BIOS...\n", codec->chip_name); + printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); board_config = ALC269_AUTO; } @@ -14448,8 +14446,8 @@ static int patch_alc861(struct hda_codec *codec) alc861_cfg_tbl); if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for %s, " - "trying auto-probe from BIOS...\n", codec->chip_name); + printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); board_config = ALC861_AUTO; } @@ -15372,8 +15370,8 @@ static int patch_alc861vd(struct hda_codec *codec) alc861vd_cfg_tbl); if (board_config < 0 || board_config >= ALC861VD_MODEL_LAST) { - printk(KERN_INFO "hda_codec: Unknown model for %s, " - "trying auto-probe from BIOS...\n", codec->chip_name); + printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); board_config = ALC861VD_AUTO; } @@ -17296,8 +17294,8 @@ static int patch_alc662(struct hda_codec *codec) alc662_models, alc662_cfg_tbl); if (board_config < 0) { - printk(KERN_INFO "hda_codec: Unknown model for %s, " - "trying auto-probe from BIOS...\n", codec->chip_name); + printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); board_config = ALC662_AUTO; } diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 9de97f30699..c6dc625c66b 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4794,7 +4794,8 @@ static int patch_stac9200(struct hda_codec *codec) stac9200_models, stac9200_cfg_tbl); if (spec->board_config < 0) - snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9200, using BIOS defaults\n"); + snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); else stac92xx_set_config_regs(codec, stac9200_brd_tbl[spec->board_config]); @@ -4866,8 +4867,8 @@ static int patch_stac925x(struct hda_codec *codec) stac925x_cfg_tbl); again: if (spec->board_config < 0) - snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC925x," - "using BIOS defaults\n"); + snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); else stac92xx_set_config_regs(codec, stac925x_brd_tbl[spec->board_config]); @@ -4949,8 +4950,8 @@ static int patch_stac92hd73xx(struct hda_codec *codec) stac92hd73xx_cfg_tbl); again: if (spec->board_config < 0) - snd_printdd(KERN_INFO "hda_codec: Unknown model for" - " STAC92HD73XX, using BIOS defaults\n"); + snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); else stac92xx_set_config_regs(codec, stac92hd73xx_brd_tbl[spec->board_config]); @@ -5125,8 +5126,8 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) stac92hd83xxx_cfg_tbl); again: if (spec->board_config < 0) - snd_printdd(KERN_INFO "hda_codec: Unknown model for" - " STAC92HD83XXX, using BIOS defaults\n"); + snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); else stac92xx_set_config_regs(codec, stac92hd83xxx_brd_tbl[spec->board_config]); @@ -5291,8 +5292,8 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) stac92hd71bxx_cfg_tbl); again: if (spec->board_config < 0) - snd_printdd(KERN_INFO "hda_codec: Unknown model for" - " STAC92HD71BXX, using BIOS defaults\n"); + snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); else stac92xx_set_config_regs(codec, stac92hd71bxx_brd_tbl[spec->board_config]); @@ -5547,8 +5548,8 @@ static int patch_stac922x(struct hda_codec *codec) again: if (spec->board_config < 0) - snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC922x, " - "using BIOS defaults\n"); + snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); else stac92xx_set_config_regs(codec, stac922x_brd_tbl[spec->board_config]); @@ -5610,8 +5611,8 @@ static int patch_stac927x(struct hda_codec *codec) stac927x_cfg_tbl); again: if (spec->board_config < 0) - snd_printdd(KERN_INFO "hda_codec: Unknown model for" - "STAC927x, using BIOS defaults\n"); + snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); else stac92xx_set_config_regs(codec, stac927x_brd_tbl[spec->board_config]); @@ -5738,7 +5739,8 @@ static int patch_stac9205(struct hda_codec *codec) stac9205_cfg_tbl); again: if (spec->board_config < 0) - snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9205, using BIOS defaults\n"); + snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); else stac92xx_set_config_regs(codec, stac9205_brd_tbl[spec->board_config]); @@ -5890,8 +5892,8 @@ static int patch_stac9872(struct hda_codec *codec) stac9872_models, stac9872_cfg_tbl); if (spec->board_config < 0) - snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9872, " - "using BIOS defaults\n"); + snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", + codec->chip_name); else stac92xx_set_config_regs(codec, stac9872_brd_tbl[spec->board_config]); -- cgit v1.2.3-70-g09d2 From dfff4e95d749c414af3f7350835139103408a50d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:41 +0100 Subject: ARM: S3C: CPUFREQ: Add documentation for system Add documentation for the S3C24XX style CPUFREQ driver. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- Documentation/arm/Samsung-S3C24XX/CPUfreq.txt | 75 +++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 Documentation/arm/Samsung-S3C24XX/CPUfreq.txt (limited to 'Documentation') diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt new file mode 100644 index 00000000000..76b3a11e90b --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt @@ -0,0 +1,75 @@ + S3C24XX CPUfreq support + ======================= + +Introduction +------------ + + The S3C24XX series support a number of power saving systems, such as + the ability to change the core, memory and peripheral operating + frequencies. The core control is exported via the CPUFreq driver + which has a number of different manual or automatic controls over the + rate the core is running at. + + There are two forms of the driver depending on the specific CPU and + how the clocks are arranged. The first implementation used as single + PLL to feed the ARM, memory and peripherals via a series of dividers + and muxes and this is the implementation that is documented here. A + newer version where there is a seperate PLL and clock divider for the + ARM core is available as a seperate driver. + + +Layout +------ + + The code core manages the CPU specific drivers, any data that they + need to register and the interface to the generic drivers/cpufreq + system. Each CPU registers a driver to control the PLL, clock dividers + and anything else associated with it. Any board that wants to use this + framework needs to supply at least basic details of what is required. + + The core registers with drivers/cpufreq at init time if all the data + necessary has been supplied. + + +CPU support +----------- + + The support for each CPU depends on the facilities provided by the + SoC and the driver as each device has different PLL and clock chains + associated with it. + + +Slow Mode +--------- + + The SLOW mode where the PLL is turned off altogether and the + system is fed by the external crystal input is currently not + supported. + + +sysfs +----- + + The core code exports extra information via sysfs in the directory + devices/system/cpu/cpu0/arch-freq. + + +Board Support +------------- + + Each board that wants to use the cpufreq code must register some basic + information with the core driver to provide information about what the + board requires and any restrictions being placed on it. + + The board needs to supply information about whether it needs the IO bank + timings changing, any maximum frequency limits and information about the + SDRAM refresh rate. + + + + +Document Author +--------------- + +Ben Dooks, Copyright 2009 Simtec Electronics +Licensed under GPLv2 -- cgit v1.2.3-70-g09d2 From cbf1107126af2950623fafdaa5c9df43ab00f046 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 9 Aug 2009 15:06:19 -0400 Subject: SUNRPC: convert some sysctls into module parameters Parameters like the minimum reserved port, and the number of slot entries should really be module parameters rather than sysctls. Signed-off-by: Trond Myklebust --- Documentation/kernel-parameters.txt | 21 +++++++++++++++ net/sunrpc/xprtsock.c | 52 +++++++++++++++++++++++++++++++++++++ 2 files changed, 73 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index dd1a6d4bb74..2f1820683b6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2391,6 +2391,18 @@ and is between 256 and 4096 characters. It is defined in the file stifb= [HW] Format: bpp:[:[:...]] + sunrpc.min_resvport= + sunrpc.max_resvport= + [NFS,SUNRPC] + SunRPC servers often require that client requests + originate from a privileged port (i.e. a port in the + range 0 < portnr < 1024). + An administrator who wishes to reserve some of these + ports for other uses may adjust the range that the + kernel's sunrpc client considers to be privileged + using these two parameters to set the minimum and + maximum port values. + sunrpc.pool_mode= [NFS] Control how the NFS server code allocates CPUs to @@ -2407,6 +2419,15 @@ and is between 256 and 4096 characters. It is defined in the file pernode one pool for each NUMA node (equivalent to global on non-NUMA machines) + sunrpc.tcp_slot_table_entries= + sunrpc.udp_slot_table_entries= + [NFS,SUNRPC] + Sets the upper limit on the number of simultaneous + RPC calls that can be sent from the client to a + server. Increasing these values may allow you to + improve throughput, but will also increase the + amount of memory reserved for use by the client. + swiotlb= [IA-64] Number of I/O TLB slabs switches= [HW,M68k] diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 83c73c4d017..585a864c1c4 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -2412,3 +2412,55 @@ void cleanup_socket_xprt(void) xprt_unregister_transport(&xs_udp_transport); xprt_unregister_transport(&xs_tcp_transport); } + +static int param_set_uint_minmax(const char *val, struct kernel_param *kp, + unsigned int min, unsigned int max) +{ + unsigned long num; + int ret; + + if (!val) + return -EINVAL; + ret = strict_strtoul(val, 0, &num); + if (ret == -EINVAL || num < min || num > max) + return -EINVAL; + *((unsigned int *)kp->arg) = num; + return 0; +} + +static int param_set_portnr(const char *val, struct kernel_param *kp) +{ + return param_set_uint_minmax(val, kp, + RPC_MIN_RESVPORT, + RPC_MAX_RESVPORT); +} + +static int param_get_portnr(char *buffer, struct kernel_param *kp) +{ + return param_get_uint(buffer, kp); +} +#define param_check_portnr(name, p) \ + __param_check(name, p, unsigned int); + +module_param_named(min_resvport, xprt_min_resvport, portnr, 0644); +module_param_named(max_resvport, xprt_max_resvport, portnr, 0644); + +static int param_set_slot_table_size(const char *val, struct kernel_param *kp) +{ + return param_set_uint_minmax(val, kp, + RPC_MIN_SLOT_TABLE, + RPC_MAX_SLOT_TABLE); +} + +static int param_get_slot_table_size(char *buffer, struct kernel_param *kp) +{ + return param_get_uint(buffer, kp); +} +#define param_check_slot_table_size(name, p) \ + __param_check(name, p, unsigned int); + +module_param_named(tcp_slot_table_entries, xprt_tcp_slot_table_entries, + slot_table_size, 0644); +module_param_named(udp_slot_table_entries, xprt_udp_slot_table_entries, + slot_table_size, 0644); + -- cgit v1.2.3-70-g09d2 From 7cd1837b5d24417eca667d674a97bea936849785 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:36:33 +0200 Subject: netfilter: xtables: remove xt_TOS v0 Superseded by xt_TOS v1 (v2.6.24-2396-g5c350e5). Signed-off-by: Jan Engelhardt --- Documentation/feature-removal-schedule.txt | 3 -- include/linux/netfilter_ipv4/Kbuild | 2 -- include/linux/netfilter_ipv4/ipt_TOS.h | 12 -------- include/linux/netfilter_ipv4/ipt_tos.h | 13 --------- net/netfilter/xt_DSCP.c | 46 ------------------------------ net/netfilter/xt_dscp.c | 17 ----------- 6 files changed, 93 deletions(-) delete mode 100644 include/linux/netfilter_ipv4/ipt_TOS.h delete mode 100644 include/linux/netfilter_ipv4/ipt_tos.h (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index f8cd450be9a..3aa4a779092 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -235,9 +235,6 @@ Who: Thomas Gleixner --------------------------- What (Why): - - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files - (superseded by xt_TOS/xt_tos target & match) - - "forwarding" header files like ipt_mac.h in include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/ diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index 3a7105bb8f3..86d81a285f9 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -9,7 +9,6 @@ header-y += ipt_NFQUEUE.h header-y += ipt_REJECT.h header-y += ipt_SAME.h header-y += ipt_TCPMSS.h -header-y += ipt_TOS.h header-y += ipt_TTL.h header-y += ipt_ULOG.h header-y += ipt_addrtype.h @@ -40,7 +39,6 @@ header-y += ipt_sctp.h header-y += ipt_state.h header-y += ipt_string.h header-y += ipt_tcpmss.h -header-y += ipt_tos.h header-y += ipt_ttl.h unifdef-y += ip_queue.h diff --git a/include/linux/netfilter_ipv4/ipt_TOS.h b/include/linux/netfilter_ipv4/ipt_TOS.h deleted file mode 100644 index 6bf9e1fdfd8..00000000000 --- a/include/linux/netfilter_ipv4/ipt_TOS.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _IPT_TOS_H_target -#define _IPT_TOS_H_target - -#ifndef IPTOS_NORMALSVC -#define IPTOS_NORMALSVC 0 -#endif - -struct ipt_tos_target_info { - u_int8_t tos; -}; - -#endif /*_IPT_TOS_H_target*/ diff --git a/include/linux/netfilter_ipv4/ipt_tos.h b/include/linux/netfilter_ipv4/ipt_tos.h deleted file mode 100644 index a21f5df23c5..00000000000 --- a/include/linux/netfilter_ipv4/ipt_tos.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _IPT_TOS_H -#define _IPT_TOS_H - -struct ipt_tos_info { - u_int8_t tos; - u_int8_t invert; -}; - -#ifndef IPTOS_NORMALSVC -#define IPTOS_NORMALSVC 0 -#endif - -#endif /*_IPT_TOS_H*/ diff --git a/net/netfilter/xt_DSCP.c b/net/netfilter/xt_DSCP.c index 6a347e768f8..74ce8926005 100644 --- a/net/netfilter/xt_DSCP.c +++ b/net/netfilter/xt_DSCP.c @@ -18,7 +18,6 @@ #include #include -#include MODULE_AUTHOR("Harald Welte "); MODULE_DESCRIPTION("Xtables: DSCP/TOS field modification"); @@ -72,41 +71,6 @@ static bool dscp_tg_check(const struct xt_tgchk_param *par) return true; } -static unsigned int -tos_tg_v0(struct sk_buff *skb, const struct xt_target_param *par) -{ - const struct ipt_tos_target_info *info = par->targinfo; - struct iphdr *iph = ip_hdr(skb); - u_int8_t oldtos; - - if ((iph->tos & IPTOS_TOS_MASK) != info->tos) { - if (!skb_make_writable(skb, sizeof(struct iphdr))) - return NF_DROP; - - iph = ip_hdr(skb); - oldtos = iph->tos; - iph->tos = (iph->tos & IPTOS_PREC_MASK) | info->tos; - csum_replace2(&iph->check, htons(oldtos), htons(iph->tos)); - } - - return XT_CONTINUE; -} - -static bool tos_tg_check_v0(const struct xt_tgchk_param *par) -{ - const struct ipt_tos_target_info *info = par->targinfo; - const uint8_t tos = info->tos; - - if (tos != IPTOS_LOWDELAY && tos != IPTOS_THROUGHPUT && - tos != IPTOS_RELIABILITY && tos != IPTOS_MINCOST && - tos != IPTOS_NORMALSVC) { - printk(KERN_WARNING "TOS: bad tos value %#x\n", tos); - return false; - } - - return true; -} - static unsigned int tos_tg(struct sk_buff *skb, const struct xt_target_param *par) { @@ -166,16 +130,6 @@ static struct xt_target dscp_tg_reg[] __read_mostly = { .table = "mangle", .me = THIS_MODULE, }, - { - .name = "TOS", - .revision = 0, - .family = NFPROTO_IPV4, - .table = "mangle", - .target = tos_tg_v0, - .targetsize = sizeof(struct ipt_tos_target_info), - .checkentry = tos_tg_check_v0, - .me = THIS_MODULE, - }, { .name = "TOS", .revision = 1, diff --git a/net/netfilter/xt_dscp.c b/net/netfilter/xt_dscp.c index c3f8085460d..0280d3a8c16 100644 --- a/net/netfilter/xt_dscp.c +++ b/net/netfilter/xt_dscp.c @@ -15,7 +15,6 @@ #include #include -#include MODULE_AUTHOR("Harald Welte "); MODULE_DESCRIPTION("Xtables: DSCP/TOS field match"); @@ -55,14 +54,6 @@ static bool dscp_mt_check(const struct xt_mtchk_param *par) return true; } -static bool -tos_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par) -{ - const struct ipt_tos_info *info = par->matchinfo; - - return (ip_hdr(skb)->tos == info->tos) ^ info->invert; -} - static bool tos_mt(const struct sk_buff *skb, const struct xt_match_param *par) { const struct xt_tos_match_info *info = par->matchinfo; @@ -92,14 +83,6 @@ static struct xt_match dscp_mt_reg[] __read_mostly = { .matchsize = sizeof(struct xt_dscp_info), .me = THIS_MODULE, }, - { - .name = "tos", - .revision = 0, - .family = NFPROTO_IPV4, - .match = tos_mt_v0, - .matchsize = sizeof(struct ipt_tos_info), - .me = THIS_MODULE, - }, { .name = "tos", .revision = 1, -- cgit v1.2.3-70-g09d2 From e973a70ca033bfcd4d8b59d1f66bfc1e782e1276 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:42:12 +0200 Subject: netfilter: xtables: remove xt_CONNMARK v0 Superseded by xt_CONNMARK v1 (v2.6.24-2917-g0dc8c76). Signed-off-by: Jan Engelhardt --- Documentation/feature-removal-schedule.txt | 3 - include/linux/netfilter/xt_CONNMARK.h | 6 -- net/netfilter/xt_CONNMARK.c | 134 +++-------------------------- 3 files changed, 11 insertions(+), 132 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 3aa4a779092..7eccf945d4e 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -238,9 +238,6 @@ What (Why): - "forwarding" header files like ipt_mac.h in include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/ - - xt_CONNMARK match revision 0 - (superseded by xt_CONNMARK match revision 1) - - xt_MARK target revisions 0 and 1 (superseded by xt_MARK match revision 2) diff --git a/include/linux/netfilter/xt_CONNMARK.h b/include/linux/netfilter/xt_CONNMARK.h index 7635c8ffdad..0a854586675 100644 --- a/include/linux/netfilter/xt_CONNMARK.h +++ b/include/linux/netfilter/xt_CONNMARK.h @@ -18,12 +18,6 @@ enum { XT_CONNMARK_RESTORE }; -struct xt_connmark_target_info { - unsigned long mark; - unsigned long mask; - __u8 mode; -}; - struct xt_connmark_tginfo1 { __u32 ctmark, ctmask, nfmask; __u8 mode; diff --git a/net/netfilter/xt_CONNMARK.c b/net/netfilter/xt_CONNMARK.c index d6e5ab46327..593457068ae 100644 --- a/net/netfilter/xt_CONNMARK.c +++ b/net/netfilter/xt_CONNMARK.c @@ -35,45 +35,6 @@ MODULE_ALIAS("ip6t_CONNMARK"); #include #include -static unsigned int -connmark_tg_v0(struct sk_buff *skb, const struct xt_target_param *par) -{ - const struct xt_connmark_target_info *markinfo = par->targinfo; - struct nf_conn *ct; - enum ip_conntrack_info ctinfo; - u_int32_t diff; - u_int32_t mark; - u_int32_t newmark; - - ct = nf_ct_get(skb, &ctinfo); - if (ct) { - switch(markinfo->mode) { - case XT_CONNMARK_SET: - newmark = (ct->mark & ~markinfo->mask) | markinfo->mark; - if (newmark != ct->mark) { - ct->mark = newmark; - nf_conntrack_event_cache(IPCT_MARK, ct); - } - break; - case XT_CONNMARK_SAVE: - newmark = (ct->mark & ~markinfo->mask) | - (skb->mark & markinfo->mask); - if (ct->mark != newmark) { - ct->mark = newmark; - nf_conntrack_event_cache(IPCT_MARK, ct); - } - break; - case XT_CONNMARK_RESTORE: - mark = skb->mark; - diff = (ct->mark ^ mark) & markinfo->mask; - skb->mark = mark ^ diff; - break; - } - } - - return XT_CONTINUE; -} - static unsigned int connmark_tg(struct sk_buff *skb, const struct xt_target_param *par) { @@ -112,30 +73,6 @@ connmark_tg(struct sk_buff *skb, const struct xt_target_param *par) return XT_CONTINUE; } -static bool connmark_tg_check_v0(const struct xt_tgchk_param *par) -{ - const struct xt_connmark_target_info *matchinfo = par->targinfo; - - if (matchinfo->mode == XT_CONNMARK_RESTORE) { - if (strcmp(par->table, "mangle") != 0) { - printk(KERN_WARNING "CONNMARK: restore can only be " - "called from \"mangle\" table, not \"%s\"\n", - par->table); - return false; - } - } - if (matchinfo->mark > 0xffffffff || matchinfo->mask > 0xffffffff) { - printk(KERN_WARNING "CONNMARK: Only supports 32bit mark\n"); - return false; - } - if (nf_ct_l3proto_try_module_get(par->family) < 0) { - printk(KERN_WARNING "can't load conntrack support for " - "proto=%u\n", par->family); - return false; - } - return true; -} - static bool connmark_tg_check(const struct xt_tgchk_param *par) { if (nf_ct_l3proto_try_module_get(par->family) < 0) { @@ -151,74 +88,25 @@ static void connmark_tg_destroy(const struct xt_tgdtor_param *par) nf_ct_l3proto_module_put(par->family); } -#ifdef CONFIG_COMPAT -struct compat_xt_connmark_target_info { - compat_ulong_t mark, mask; - u_int8_t mode; - u_int8_t __pad1; - u_int16_t __pad2; -}; - -static void connmark_tg_compat_from_user_v0(void *dst, void *src) -{ - const struct compat_xt_connmark_target_info *cm = src; - struct xt_connmark_target_info m = { - .mark = cm->mark, - .mask = cm->mask, - .mode = cm->mode, - }; - memcpy(dst, &m, sizeof(m)); -} - -static int connmark_tg_compat_to_user_v0(void __user *dst, void *src) -{ - const struct xt_connmark_target_info *m = src; - struct compat_xt_connmark_target_info cm = { - .mark = m->mark, - .mask = m->mask, - .mode = m->mode, - }; - return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0; -} -#endif /* CONFIG_COMPAT */ - -static struct xt_target connmark_tg_reg[] __read_mostly = { - { - .name = "CONNMARK", - .revision = 0, - .family = NFPROTO_UNSPEC, - .checkentry = connmark_tg_check_v0, - .destroy = connmark_tg_destroy, - .target = connmark_tg_v0, - .targetsize = sizeof(struct xt_connmark_target_info), -#ifdef CONFIG_COMPAT - .compatsize = sizeof(struct compat_xt_connmark_target_info), - .compat_from_user = connmark_tg_compat_from_user_v0, - .compat_to_user = connmark_tg_compat_to_user_v0, -#endif - .me = THIS_MODULE - }, - { - .name = "CONNMARK", - .revision = 1, - .family = NFPROTO_UNSPEC, - .checkentry = connmark_tg_check, - .target = connmark_tg, - .targetsize = sizeof(struct xt_connmark_tginfo1), - .destroy = connmark_tg_destroy, - .me = THIS_MODULE, - }, +static struct xt_target connmark_tg_reg __read_mostly = { + .name = "CONNMARK", + .revision = 1, + .family = NFPROTO_UNSPEC, + .checkentry = connmark_tg_check, + .target = connmark_tg, + .targetsize = sizeof(struct xt_connmark_tginfo1), + .destroy = connmark_tg_destroy, + .me = THIS_MODULE, }; static int __init connmark_tg_init(void) { - return xt_register_targets(connmark_tg_reg, - ARRAY_SIZE(connmark_tg_reg)); + return xt_register_target(&connmark_tg_reg); } static void __exit connmark_tg_exit(void) { - xt_unregister_targets(connmark_tg_reg, ARRAY_SIZE(connmark_tg_reg)); + xt_unregister_target(&connmark_tg_reg); } module_init(connmark_tg_init); -- cgit v1.2.3-70-g09d2 From c8001f7fd5a4684280fddceed9fae9ea2e4fb521 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:47:32 +0200 Subject: netfilter: xtables: remove xt_MARK v0, v1 Superseded by xt_MARK v2 (v2.6.24-2918-ge0a812a). Signed-off-by: Jan Engelhardt --- Documentation/feature-removal-schedule.txt | 3 - include/linux/netfilter/xt_MARK.h | 17 --- net/netfilter/xt_MARK.c | 163 ++--------------------------- 3 files changed, 9 insertions(+), 174 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 7eccf945d4e..121e19c9eee 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -238,9 +238,6 @@ What (Why): - "forwarding" header files like ipt_mac.h in include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/ - - xt_MARK target revisions 0 and 1 - (superseded by xt_MARK match revision 2) - - xt_connmark match revision 0 (superseded by xt_connmark match revision 1) diff --git a/include/linux/netfilter/xt_MARK.h b/include/linux/netfilter/xt_MARK.h index 028304bcc0b..bc9561bdef7 100644 --- a/include/linux/netfilter/xt_MARK.h +++ b/include/linux/netfilter/xt_MARK.h @@ -3,23 +3,6 @@ #include -/* Version 0 */ -struct xt_mark_target_info { - unsigned long mark; -}; - -/* Version 1 */ -enum { - XT_MARK_SET=0, - XT_MARK_AND, - XT_MARK_OR, -}; - -struct xt_mark_target_info_v1 { - unsigned long mark; - __u8 mode; -}; - struct xt_mark_tginfo2 { __u32 mark, mask; }; diff --git a/net/netfilter/xt_MARK.c b/net/netfilter/xt_MARK.c index 67574bcfb8a..225f8d11e17 100644 --- a/net/netfilter/xt_MARK.c +++ b/net/netfilter/xt_MARK.c @@ -24,39 +24,6 @@ MODULE_DESCRIPTION("Xtables: packet mark modification"); MODULE_ALIAS("ipt_MARK"); MODULE_ALIAS("ip6t_MARK"); -static unsigned int -mark_tg_v0(struct sk_buff *skb, const struct xt_target_param *par) -{ - const struct xt_mark_target_info *markinfo = par->targinfo; - - skb->mark = markinfo->mark; - return XT_CONTINUE; -} - -static unsigned int -mark_tg_v1(struct sk_buff *skb, const struct xt_target_param *par) -{ - const struct xt_mark_target_info_v1 *markinfo = par->targinfo; - int mark = 0; - - switch (markinfo->mode) { - case XT_MARK_SET: - mark = markinfo->mark; - break; - - case XT_MARK_AND: - mark = skb->mark & markinfo->mark; - break; - - case XT_MARK_OR: - mark = skb->mark | markinfo->mark; - break; - } - - skb->mark = mark; - return XT_CONTINUE; -} - static unsigned int mark_tg(struct sk_buff *skb, const struct xt_target_param *par) { @@ -66,135 +33,23 @@ mark_tg(struct sk_buff *skb, const struct xt_target_param *par) return XT_CONTINUE; } -static bool mark_tg_check_v0(const struct xt_tgchk_param *par) -{ - const struct xt_mark_target_info *markinfo = par->targinfo; - - if (markinfo->mark > 0xffffffff) { - printk(KERN_WARNING "MARK: Only supports 32bit wide mark\n"); - return false; - } - return true; -} - -static bool mark_tg_check_v1(const struct xt_tgchk_param *par) -{ - const struct xt_mark_target_info_v1 *markinfo = par->targinfo; - - if (markinfo->mode != XT_MARK_SET - && markinfo->mode != XT_MARK_AND - && markinfo->mode != XT_MARK_OR) { - printk(KERN_WARNING "MARK: unknown mode %u\n", - markinfo->mode); - return false; - } - if (markinfo->mark > 0xffffffff) { - printk(KERN_WARNING "MARK: Only supports 32bit wide mark\n"); - return false; - } - return true; -} - -#ifdef CONFIG_COMPAT -struct compat_xt_mark_target_info { - compat_ulong_t mark; -}; - -static void mark_tg_compat_from_user_v0(void *dst, void *src) -{ - const struct compat_xt_mark_target_info *cm = src; - struct xt_mark_target_info m = { - .mark = cm->mark, - }; - memcpy(dst, &m, sizeof(m)); -} - -static int mark_tg_compat_to_user_v0(void __user *dst, void *src) -{ - const struct xt_mark_target_info *m = src; - struct compat_xt_mark_target_info cm = { - .mark = m->mark, - }; - return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0; -} - -struct compat_xt_mark_target_info_v1 { - compat_ulong_t mark; - u_int8_t mode; - u_int8_t __pad1; - u_int16_t __pad2; -}; - -static void mark_tg_compat_from_user_v1(void *dst, void *src) -{ - const struct compat_xt_mark_target_info_v1 *cm = src; - struct xt_mark_target_info_v1 m = { - .mark = cm->mark, - .mode = cm->mode, - }; - memcpy(dst, &m, sizeof(m)); -} - -static int mark_tg_compat_to_user_v1(void __user *dst, void *src) -{ - const struct xt_mark_target_info_v1 *m = src; - struct compat_xt_mark_target_info_v1 cm = { - .mark = m->mark, - .mode = m->mode, - }; - return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0; -} -#endif /* CONFIG_COMPAT */ - -static struct xt_target mark_tg_reg[] __read_mostly = { - { - .name = "MARK", - .family = NFPROTO_UNSPEC, - .revision = 0, - .checkentry = mark_tg_check_v0, - .target = mark_tg_v0, - .targetsize = sizeof(struct xt_mark_target_info), -#ifdef CONFIG_COMPAT - .compatsize = sizeof(struct compat_xt_mark_target_info), - .compat_from_user = mark_tg_compat_from_user_v0, - .compat_to_user = mark_tg_compat_to_user_v0, -#endif - .table = "mangle", - .me = THIS_MODULE, - }, - { - .name = "MARK", - .family = NFPROTO_UNSPEC, - .revision = 1, - .checkentry = mark_tg_check_v1, - .target = mark_tg_v1, - .targetsize = sizeof(struct xt_mark_target_info_v1), -#ifdef CONFIG_COMPAT - .compatsize = sizeof(struct compat_xt_mark_target_info_v1), - .compat_from_user = mark_tg_compat_from_user_v1, - .compat_to_user = mark_tg_compat_to_user_v1, -#endif - .table = "mangle", - .me = THIS_MODULE, - }, - { - .name = "MARK", - .revision = 2, - .family = NFPROTO_UNSPEC, - .target = mark_tg, - .targetsize = sizeof(struct xt_mark_tginfo2), - .me = THIS_MODULE, - }, +static struct xt_target mark_tg_reg __read_mostly = { + .name = "MARK", + .revision = 2, + .family = NFPROTO_UNSPEC, + .target = mark_tg, + .targetsize = sizeof(struct xt_mark_tginfo2), + .me = THIS_MODULE, }; static int __init mark_tg_init(void) { - return xt_register_targets(mark_tg_reg, ARRAY_SIZE(mark_tg_reg)); + return xt_register_target(&mark_tg_reg); } static void __exit mark_tg_exit(void) { - xt_unregister_targets(mark_tg_reg, ARRAY_SIZE(mark_tg_reg)); + xt_unregister_target(&mark_tg_reg); } module_init(mark_tg_init); -- cgit v1.2.3-70-g09d2 From 84899a2b9adaf6c2e20d198d7c24562ce6b391d8 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:50:33 +0200 Subject: netfilter: xtables: remove xt_connmark v0 Superseded by xt_connmark v1 (v2.6.24-2919-g96e3227). Signed-off-by: Jan Engelhardt --- Documentation/feature-removal-schedule.txt | 3 - include/linux/netfilter/xt_connmark.h | 5 -- net/netfilter/xt_connmark.c | 101 ++++------------------------- 3 files changed, 11 insertions(+), 98 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 121e19c9eee..54f93579492 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -238,9 +238,6 @@ What (Why): - "forwarding" header files like ipt_mac.h in include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/ - - xt_connmark match revision 0 - (superseded by xt_connmark match revision 1) - - xt_conntrack match revision 0 (superseded by xt_conntrack match revision 1) diff --git a/include/linux/netfilter/xt_connmark.h b/include/linux/netfilter/xt_connmark.h index 571e266d004..619e47cde01 100644 --- a/include/linux/netfilter/xt_connmark.h +++ b/include/linux/netfilter/xt_connmark.h @@ -12,11 +12,6 @@ * (at your option) any later version. */ -struct xt_connmark_info { - unsigned long mark, mask; - __u8 invert; -}; - struct xt_connmark_mtinfo1 { __u32 mark, mask; __u8 invert; diff --git a/net/netfilter/xt_connmark.c b/net/netfilter/xt_connmark.c index 86cacab7a4a..122aa8b0147 100644 --- a/net/netfilter/xt_connmark.c +++ b/net/netfilter/xt_connmark.c @@ -47,36 +47,6 @@ connmark_mt(const struct sk_buff *skb, const struct xt_match_param *par) return ((ct->mark & info->mask) == info->mark) ^ info->invert; } -static bool -connmark_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par) -{ - const struct xt_connmark_info *info = par->matchinfo; - const struct nf_conn *ct; - enum ip_conntrack_info ctinfo; - - ct = nf_ct_get(skb, &ctinfo); - if (!ct) - return false; - - return ((ct->mark & info->mask) == info->mark) ^ info->invert; -} - -static bool connmark_mt_check_v0(const struct xt_mtchk_param *par) -{ - const struct xt_connmark_info *cm = par->matchinfo; - - if (cm->mark > 0xffffffff || cm->mask > 0xffffffff) { - printk(KERN_WARNING "connmark: only support 32bit mark\n"); - return false; - } - if (nf_ct_l3proto_try_module_get(par->family) < 0) { - printk(KERN_WARNING "can't load conntrack support for " - "proto=%u\n", par->family); - return false; - } - return true; -} - static bool connmark_mt_check(const struct xt_mtchk_param *par) { if (nf_ct_l3proto_try_module_get(par->family) < 0) { @@ -92,74 +62,25 @@ static void connmark_mt_destroy(const struct xt_mtdtor_param *par) nf_ct_l3proto_module_put(par->family); } -#ifdef CONFIG_COMPAT -struct compat_xt_connmark_info { - compat_ulong_t mark, mask; - u_int8_t invert; - u_int8_t __pad1; - u_int16_t __pad2; -}; - -static void connmark_mt_compat_from_user_v0(void *dst, void *src) -{ - const struct compat_xt_connmark_info *cm = src; - struct xt_connmark_info m = { - .mark = cm->mark, - .mask = cm->mask, - .invert = cm->invert, - }; - memcpy(dst, &m, sizeof(m)); -} - -static int connmark_mt_compat_to_user_v0(void __user *dst, void *src) -{ - const struct xt_connmark_info *m = src; - struct compat_xt_connmark_info cm = { - .mark = m->mark, - .mask = m->mask, - .invert = m->invert, - }; - return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0; -} -#endif /* CONFIG_COMPAT */ - -static struct xt_match connmark_mt_reg[] __read_mostly = { - { - .name = "connmark", - .revision = 0, - .family = NFPROTO_UNSPEC, - .checkentry = connmark_mt_check_v0, - .match = connmark_mt_v0, - .destroy = connmark_mt_destroy, - .matchsize = sizeof(struct xt_connmark_info), -#ifdef CONFIG_COMPAT - .compatsize = sizeof(struct compat_xt_connmark_info), - .compat_from_user = connmark_mt_compat_from_user_v0, - .compat_to_user = connmark_mt_compat_to_user_v0, -#endif - .me = THIS_MODULE - }, - { - .name = "connmark", - .revision = 1, - .family = NFPROTO_UNSPEC, - .checkentry = connmark_mt_check, - .match = connmark_mt, - .matchsize = sizeof(struct xt_connmark_mtinfo1), - .destroy = connmark_mt_destroy, - .me = THIS_MODULE, - }, +static struct xt_match connmark_mt_reg __read_mostly = { + .name = "connmark", + .revision = 1, + .family = NFPROTO_UNSPEC, + .checkentry = connmark_mt_check, + .match = connmark_mt, + .matchsize = sizeof(struct xt_connmark_mtinfo1), + .destroy = connmark_mt_destroy, + .me = THIS_MODULE, }; static int __init connmark_mt_init(void) { - return xt_register_matches(connmark_mt_reg, - ARRAY_SIZE(connmark_mt_reg)); + return xt_register_match(&connmark_mt_reg); } static void __exit connmark_mt_exit(void) { - xt_unregister_matches(connmark_mt_reg, ARRAY_SIZE(connmark_mt_reg)); + xt_unregister_match(&connmark_mt_reg); } module_init(connmark_mt_init); -- cgit v1.2.3-70-g09d2 From 9e05ec4b1804a1ba51f61fe169aef9b86edcd3f7 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:56:14 +0200 Subject: netfilter: xtables: remove xt_conntrack v0 Superseded by xt_conntrack v1 (v2.6.24-2921-g64eb12f). Signed-off-by: Jan Engelhardt --- Documentation/feature-removal-schedule.txt | 3 - include/linux/netfilter/xt_conntrack.h | 36 ------- net/netfilter/xt_conntrack.c | 155 +---------------------------- 3 files changed, 1 insertion(+), 193 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 54f93579492..6746473ef03 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -238,9 +238,6 @@ What (Why): - "forwarding" header files like ipt_mac.h in include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/ - - xt_conntrack match revision 0 - (superseded by xt_conntrack match revision 1) - - xt_iprange match revision 0, include/linux/netfilter_ipv4/ipt_iprange.h (superseded by xt_iprange match revision 1) diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h index 7ae05338e94..54f47a2f615 100644 --- a/include/linux/netfilter/xt_conntrack.h +++ b/include/linux/netfilter/xt_conntrack.h @@ -32,42 +32,6 @@ enum { XT_CONNTRACK_DIRECTION = 1 << 12, }; -/* This is exposed to userspace, so remains frozen in time. */ -struct ip_conntrack_old_tuple -{ - struct { - __be32 ip; - union { - __u16 all; - } u; - } src; - - struct { - __be32 ip; - union { - __u16 all; - } u; - - /* The protocol. */ - __u16 protonum; - } dst; -}; - -struct xt_conntrack_info -{ - unsigned int statemask, statusmask; - - struct ip_conntrack_old_tuple tuple[IP_CT_DIR_MAX]; - struct in_addr sipmsk[IP_CT_DIR_MAX], dipmsk[IP_CT_DIR_MAX]; - - unsigned long expires_min, expires_max; - - /* Flags word */ - __u8 flags; - /* Inverse flags */ - __u8 invflags; -}; - struct xt_conntrack_mtinfo1 { union nf_inet_addr origsrc_addr, origsrc_mask; union nf_inet_addr origdst_addr, origdst_mask; diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c index fc581800698..6dc4652f2fe 100644 --- a/net/netfilter/xt_conntrack.c +++ b/net/netfilter/xt_conntrack.c @@ -19,100 +19,11 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Marc Boucher "); -MODULE_AUTHOR("Jan Engelhardt "); +MODULE_AUTHOR("Jan Engelhardt "); MODULE_DESCRIPTION("Xtables: connection tracking state match"); MODULE_ALIAS("ipt_conntrack"); MODULE_ALIAS("ip6t_conntrack"); -static bool -conntrack_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par) -{ - const struct xt_conntrack_info *sinfo = par->matchinfo; - const struct nf_conn *ct; - enum ip_conntrack_info ctinfo; - unsigned int statebit; - - ct = nf_ct_get(skb, &ctinfo); - -#define FWINV(bool, invflg) ((bool) ^ !!(sinfo->invflags & (invflg))) - - if (ct == &nf_conntrack_untracked) - statebit = XT_CONNTRACK_STATE_UNTRACKED; - else if (ct) - statebit = XT_CONNTRACK_STATE_BIT(ctinfo); - else - statebit = XT_CONNTRACK_STATE_INVALID; - - if (sinfo->flags & XT_CONNTRACK_STATE) { - if (ct) { - if (test_bit(IPS_SRC_NAT_BIT, &ct->status)) - statebit |= XT_CONNTRACK_STATE_SNAT; - if (test_bit(IPS_DST_NAT_BIT, &ct->status)) - statebit |= XT_CONNTRACK_STATE_DNAT; - } - if (FWINV((statebit & sinfo->statemask) == 0, - XT_CONNTRACK_STATE)) - return false; - } - - if (ct == NULL) { - if (sinfo->flags & ~XT_CONNTRACK_STATE) - return false; - return true; - } - - if (sinfo->flags & XT_CONNTRACK_PROTO && - FWINV(nf_ct_protonum(ct) != - sinfo->tuple[IP_CT_DIR_ORIGINAL].dst.protonum, - XT_CONNTRACK_PROTO)) - return false; - - if (sinfo->flags & XT_CONNTRACK_ORIGSRC && - FWINV((ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip & - sinfo->sipmsk[IP_CT_DIR_ORIGINAL].s_addr) != - sinfo->tuple[IP_CT_DIR_ORIGINAL].src.ip, - XT_CONNTRACK_ORIGSRC)) - return false; - - if (sinfo->flags & XT_CONNTRACK_ORIGDST && - FWINV((ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip & - sinfo->dipmsk[IP_CT_DIR_ORIGINAL].s_addr) != - sinfo->tuple[IP_CT_DIR_ORIGINAL].dst.ip, - XT_CONNTRACK_ORIGDST)) - return false; - - if (sinfo->flags & XT_CONNTRACK_REPLSRC && - FWINV((ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip & - sinfo->sipmsk[IP_CT_DIR_REPLY].s_addr) != - sinfo->tuple[IP_CT_DIR_REPLY].src.ip, - XT_CONNTRACK_REPLSRC)) - return false; - - if (sinfo->flags & XT_CONNTRACK_REPLDST && - FWINV((ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip & - sinfo->dipmsk[IP_CT_DIR_REPLY].s_addr) != - sinfo->tuple[IP_CT_DIR_REPLY].dst.ip, - XT_CONNTRACK_REPLDST)) - return false; - - if (sinfo->flags & XT_CONNTRACK_STATUS && - FWINV((ct->status & sinfo->statusmask) == 0, - XT_CONNTRACK_STATUS)) - return false; - - if(sinfo->flags & XT_CONNTRACK_EXPIRES) { - unsigned long expires = timer_pending(&ct->timeout) ? - (ct->timeout.expires - jiffies)/HZ : 0; - - if (FWINV(!(expires >= sinfo->expires_min && - expires <= sinfo->expires_max), - XT_CONNTRACK_EXPIRES)) - return false; - } - return true; -#undef FWINV -} - static bool conntrack_addrcmp(const union nf_inet_addr *kaddr, const union nf_inet_addr *uaddr, @@ -337,71 +248,7 @@ static void conntrack_mt_destroy_v1(const struct xt_mtdtor_param *par) conntrack_mt_destroy(par); } -#ifdef CONFIG_COMPAT -struct compat_xt_conntrack_info -{ - compat_uint_t statemask; - compat_uint_t statusmask; - struct ip_conntrack_old_tuple tuple[IP_CT_DIR_MAX]; - struct in_addr sipmsk[IP_CT_DIR_MAX]; - struct in_addr dipmsk[IP_CT_DIR_MAX]; - compat_ulong_t expires_min; - compat_ulong_t expires_max; - u_int8_t flags; - u_int8_t invflags; -}; - -static void conntrack_mt_compat_from_user_v0(void *dst, void *src) -{ - const struct compat_xt_conntrack_info *cm = src; - struct xt_conntrack_info m = { - .statemask = cm->statemask, - .statusmask = cm->statusmask, - .expires_min = cm->expires_min, - .expires_max = cm->expires_max, - .flags = cm->flags, - .invflags = cm->invflags, - }; - memcpy(m.tuple, cm->tuple, sizeof(m.tuple)); - memcpy(m.sipmsk, cm->sipmsk, sizeof(m.sipmsk)); - memcpy(m.dipmsk, cm->dipmsk, sizeof(m.dipmsk)); - memcpy(dst, &m, sizeof(m)); -} - -static int conntrack_mt_compat_to_user_v0(void __user *dst, void *src) -{ - const struct xt_conntrack_info *m = src; - struct compat_xt_conntrack_info cm = { - .statemask = m->statemask, - .statusmask = m->statusmask, - .expires_min = m->expires_min, - .expires_max = m->expires_max, - .flags = m->flags, - .invflags = m->invflags, - }; - memcpy(cm.tuple, m->tuple, sizeof(cm.tuple)); - memcpy(cm.sipmsk, m->sipmsk, sizeof(cm.sipmsk)); - memcpy(cm.dipmsk, m->dipmsk, sizeof(cm.dipmsk)); - return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0; -} -#endif - static struct xt_match conntrack_mt_reg[] __read_mostly = { - { - .name = "conntrack", - .revision = 0, - .family = NFPROTO_IPV4, - .match = conntrack_mt_v0, - .checkentry = conntrack_mt_check, - .destroy = conntrack_mt_destroy, - .matchsize = sizeof(struct xt_conntrack_info), - .me = THIS_MODULE, -#ifdef CONFIG_COMPAT - .compatsize = sizeof(struct compat_xt_conntrack_info), - .compat_from_user = conntrack_mt_compat_from_user_v0, - .compat_to_user = conntrack_mt_compat_to_user_v0, -#endif - }, { .name = "conntrack", .revision = 1, -- cgit v1.2.3-70-g09d2 From 36d4084dc8eb7a9a3655a2041097a46aff3061e9 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:58:19 +0200 Subject: netfilter: xtables: remove xt_iprange v0 Superseded by xt_iprange v1 (v2.6.24-2928-g1a50c5a1). Signed-off-by: Jan Engelhardt --- Documentation/feature-removal-schedule.txt | 4 --- include/linux/netfilter_ipv4/Kbuild | 1 - include/linux/netfilter_ipv4/ipt_iprange.h | 21 -------------- net/netfilter/xt_iprange.c | 45 ++---------------------------- 4 files changed, 2 insertions(+), 69 deletions(-) delete mode 100644 include/linux/netfilter_ipv4/ipt_iprange.h (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 6746473ef03..8862b037f0a 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -238,10 +238,6 @@ What (Why): - "forwarding" header files like ipt_mac.h in include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/ - - xt_iprange match revision 0, - include/linux/netfilter_ipv4/ipt_iprange.h - (superseded by xt_iprange match revision 1) - - xt_mark match revision 0 (superseded by xt_mark match revision 1) diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index 86d81a285f9..5e361ef44e8 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -23,7 +23,6 @@ header-y += ipt_ecn.h header-y += ipt_esp.h header-y += ipt_hashlimit.h header-y += ipt_helper.h -header-y += ipt_iprange.h header-y += ipt_length.h header-y += ipt_limit.h header-y += ipt_mac.h diff --git a/include/linux/netfilter_ipv4/ipt_iprange.h b/include/linux/netfilter_ipv4/ipt_iprange.h deleted file mode 100644 index 5f1aebde4d2..00000000000 --- a/include/linux/netfilter_ipv4/ipt_iprange.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _IPT_IPRANGE_H -#define _IPT_IPRANGE_H - -#include -#include - -struct ipt_iprange { - /* Inclusive: network order. */ - __be32 min_ip, max_ip; -}; - -struct ipt_iprange_info -{ - struct ipt_iprange src; - struct ipt_iprange dst; - - /* Flags from above */ - u_int8_t flags; -}; - -#endif /* _IPT_IPRANGE_H */ diff --git a/net/netfilter/xt_iprange.c b/net/netfilter/xt_iprange.c index 501f9b62318..ffc96387d55 100644 --- a/net/netfilter/xt_iprange.c +++ b/net/netfilter/xt_iprange.c @@ -14,40 +14,6 @@ #include #include #include -#include - -static bool -iprange_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par) -{ - const struct ipt_iprange_info *info = par->matchinfo; - const struct iphdr *iph = ip_hdr(skb); - - if (info->flags & IPRANGE_SRC) { - if ((ntohl(iph->saddr) < ntohl(info->src.min_ip) - || ntohl(iph->saddr) > ntohl(info->src.max_ip)) - ^ !!(info->flags & IPRANGE_SRC_INV)) { - pr_debug("src IP %pI4 NOT in range %s%pI4-%pI4\n", - &iph->saddr, - info->flags & IPRANGE_SRC_INV ? "(INV) " : "", - &info->src.min_ip, - &info->src.max_ip); - return false; - } - } - if (info->flags & IPRANGE_DST) { - if ((ntohl(iph->daddr) < ntohl(info->dst.min_ip) - || ntohl(iph->daddr) > ntohl(info->dst.max_ip)) - ^ !!(info->flags & IPRANGE_DST_INV)) { - pr_debug("dst IP %pI4 NOT in range %s%pI4-%pI4\n", - &iph->daddr, - info->flags & IPRANGE_DST_INV ? "(INV) " : "", - &info->dst.min_ip, - &info->dst.max_ip); - return false; - } - } - return true; -} static bool iprange_mt4(const struct sk_buff *skb, const struct xt_match_param *par) @@ -125,14 +91,6 @@ iprange_mt6(const struct sk_buff *skb, const struct xt_match_param *par) } static struct xt_match iprange_mt_reg[] __read_mostly = { - { - .name = "iprange", - .revision = 0, - .family = NFPROTO_IPV4, - .match = iprange_mt_v0, - .matchsize = sizeof(struct ipt_iprange_info), - .me = THIS_MODULE, - }, { .name = "iprange", .revision = 1, @@ -164,7 +122,8 @@ static void __exit iprange_mt_exit(void) module_init(iprange_mt_init); module_exit(iprange_mt_exit); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Jozsef Kadlecsik , Jan Engelhardt "); +MODULE_AUTHOR("Jozsef Kadlecsik "); +MODULE_AUTHOR("Jan Engelhardt "); MODULE_DESCRIPTION("Xtables: arbitrary IPv4 range matching"); MODULE_ALIAS("ipt_iprange"); MODULE_ALIAS("ip6t_iprange"); -- cgit v1.2.3-70-g09d2 From 4725c7287ef2c4340cb433f59e40d143c1f43c22 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 19:02:27 +0200 Subject: netfilter: xtables: remove xt_mark v0 Superseded by xt_mark v1 (v2.6.24-2922-g17b0d7e). Signed-off-by: Jan Engelhardt --- Documentation/feature-removal-schedule.txt | 3 -- include/linux/netfilter/xt_mark.h | 5 -- net/netfilter/xt_mark.c | 86 ++++-------------------------- 3 files changed, 10 insertions(+), 84 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 8862b037f0a..5556d2300be 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -238,9 +238,6 @@ What (Why): - "forwarding" header files like ipt_mac.h in include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/ - - xt_mark match revision 0 - (superseded by xt_mark match revision 1) - - xt_recent: the old ipt_recent proc dir (superseded by /proc/net/xt_recent) diff --git a/include/linux/netfilter/xt_mark.h b/include/linux/netfilter/xt_mark.h index 6fa460a3cc2..6607c8f38ea 100644 --- a/include/linux/netfilter/xt_mark.h +++ b/include/linux/netfilter/xt_mark.h @@ -3,11 +3,6 @@ #include -struct xt_mark_info { - unsigned long mark, mask; - __u8 invert; -}; - struct xt_mark_mtinfo1 { __u32 mark, mask; __u8 invert; diff --git a/net/netfilter/xt_mark.c b/net/netfilter/xt_mark.c index 10b9e34bbc5..1db07d8125f 100644 --- a/net/netfilter/xt_mark.c +++ b/net/netfilter/xt_mark.c @@ -3,7 +3,7 @@ * * (C) 1999-2001 Marc Boucher * Copyright © CC Computer Consultants GmbH, 2007 - 2008 - * Jan Engelhardt + * Jan Engelhardt * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,14 +22,6 @@ MODULE_DESCRIPTION("Xtables: packet mark match"); MODULE_ALIAS("ipt_mark"); MODULE_ALIAS("ip6t_mark"); -static bool -mark_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par) -{ - const struct xt_mark_info *info = par->matchinfo; - - return ((skb->mark & info->mask) == info->mark) ^ info->invert; -} - static bool mark_mt(const struct sk_buff *skb, const struct xt_match_param *par) { @@ -38,81 +30,23 @@ mark_mt(const struct sk_buff *skb, const struct xt_match_param *par) return ((skb->mark & info->mask) == info->mark) ^ info->invert; } -static bool mark_mt_check_v0(const struct xt_mtchk_param *par) -{ - const struct xt_mark_info *minfo = par->matchinfo; - - if (minfo->mark > 0xffffffff || minfo->mask > 0xffffffff) { - printk(KERN_WARNING "mark: only supports 32bit mark\n"); - return false; - } - return true; -} - -#ifdef CONFIG_COMPAT -struct compat_xt_mark_info { - compat_ulong_t mark, mask; - u_int8_t invert; - u_int8_t __pad1; - u_int16_t __pad2; -}; - -static void mark_mt_compat_from_user_v0(void *dst, void *src) -{ - const struct compat_xt_mark_info *cm = src; - struct xt_mark_info m = { - .mark = cm->mark, - .mask = cm->mask, - .invert = cm->invert, - }; - memcpy(dst, &m, sizeof(m)); -} - -static int mark_mt_compat_to_user_v0(void __user *dst, void *src) -{ - const struct xt_mark_info *m = src; - struct compat_xt_mark_info cm = { - .mark = m->mark, - .mask = m->mask, - .invert = m->invert, - }; - return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0; -} -#endif /* CONFIG_COMPAT */ - -static struct xt_match mark_mt_reg[] __read_mostly = { - { - .name = "mark", - .revision = 0, - .family = NFPROTO_UNSPEC, - .checkentry = mark_mt_check_v0, - .match = mark_mt_v0, - .matchsize = sizeof(struct xt_mark_info), -#ifdef CONFIG_COMPAT - .compatsize = sizeof(struct compat_xt_mark_info), - .compat_from_user = mark_mt_compat_from_user_v0, - .compat_to_user = mark_mt_compat_to_user_v0, -#endif - .me = THIS_MODULE, - }, - { - .name = "mark", - .revision = 1, - .family = NFPROTO_UNSPEC, - .match = mark_mt, - .matchsize = sizeof(struct xt_mark_mtinfo1), - .me = THIS_MODULE, - }, +static struct xt_match mark_mt_reg __read_mostly = { + .name = "mark", + .revision = 1, + .family = NFPROTO_UNSPEC, + .match = mark_mt, + .matchsize = sizeof(struct xt_mark_mtinfo1), + .me = THIS_MODULE, }; static int __init mark_mt_init(void) { - return xt_register_matches(mark_mt_reg, ARRAY_SIZE(mark_mt_reg)); + return xt_register_match(&mark_mt_reg); } static void __exit mark_mt_exit(void) { - xt_unregister_matches(mark_mt_reg, ARRAY_SIZE(mark_mt_reg)); + xt_unregister_match(&mark_mt_reg); } module_init(mark_mt_init); -- cgit v1.2.3-70-g09d2 From 93bb1e9d117bfc60306b2b8bd9e0fa7ba3c88636 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 19:47:21 +0200 Subject: netfilter: xtables: remove redirecting header files When IPv4 and IPv6 matches were unified approx. 3.5 years ago, they received new header filenames (e.g. xt_CLASSIFY.h). Let's remove the old ones now. Signed-off-by: Jan Engelhardt --- Documentation/feature-removal-schedule.txt | 3 - include/linux/netfilter_ipv4/Kbuild | 28 ------- include/linux/netfilter_ipv4/ipt_CLASSIFY.h | 7 -- include/linux/netfilter_ipv4/ipt_CONNMARK.h | 19 ----- include/linux/netfilter_ipv4/ipt_DSCP.h | 18 ----- include/linux/netfilter_ipv4/ipt_ECN.h | 4 +- include/linux/netfilter_ipv4/ipt_MARK.h | 18 ----- include/linux/netfilter_ipv4/ipt_NFQUEUE.h | 16 ---- include/linux/netfilter_ipv4/ipt_TCPMSS.h | 9 --- include/linux/netfilter_ipv4/ipt_comment.h | 10 --- include/linux/netfilter_ipv4/ipt_connbytes.h | 18 ----- include/linux/netfilter_ipv4/ipt_connmark.h | 7 -- include/linux/netfilter_ipv4/ipt_conntrack.h | 28 ------- include/linux/netfilter_ipv4/ipt_dccp.h | 15 ---- include/linux/netfilter_ipv4/ipt_dscp.h | 21 ------ include/linux/netfilter_ipv4/ipt_ecn.h | 4 +- include/linux/netfilter_ipv4/ipt_esp.h | 10 --- include/linux/netfilter_ipv4/ipt_hashlimit.h | 14 ---- include/linux/netfilter_ipv4/ipt_helper.h | 7 -- include/linux/netfilter_ipv4/ipt_length.h | 7 -- include/linux/netfilter_ipv4/ipt_limit.h | 8 -- include/linux/netfilter_ipv4/ipt_mac.h | 7 -- include/linux/netfilter_ipv4/ipt_mark.h | 9 --- include/linux/netfilter_ipv4/ipt_multiport.h | 15 ---- include/linux/netfilter_ipv4/ipt_physdev.h | 17 ----- include/linux/netfilter_ipv4/ipt_pkttype.h | 7 -- include/linux/netfilter_ipv4/ipt_policy.h | 23 ------ include/linux/netfilter_ipv4/ipt_recent.h | 21 ------ include/linux/netfilter_ipv4/ipt_sctp.h | 105 -------------------------- include/linux/netfilter_ipv4/ipt_state.h | 15 ---- include/linux/netfilter_ipv4/ipt_string.h | 10 --- include/linux/netfilter_ipv4/ipt_tcpmss.h | 7 -- include/linux/netfilter_ipv6/Kbuild | 11 +-- include/linux/netfilter_ipv6/ip6t_MARK.h | 9 --- include/linux/netfilter_ipv6/ip6t_esp.h | 10 --- include/linux/netfilter_ipv6/ip6t_length.h | 8 -- include/linux/netfilter_ipv6/ip6t_limit.h | 8 -- include/linux/netfilter_ipv6/ip6t_mac.h | 7 -- include/linux/netfilter_ipv6/ip6t_mark.h | 9 --- include/linux/netfilter_ipv6/ip6t_multiport.h | 14 ---- include/linux/netfilter_ipv6/ip6t_physdev.h | 17 ----- include/linux/netfilter_ipv6/ip6t_policy.h | 23 ------ 42 files changed, 5 insertions(+), 618 deletions(-) delete mode 100644 include/linux/netfilter_ipv4/ipt_CLASSIFY.h delete mode 100644 include/linux/netfilter_ipv4/ipt_CONNMARK.h delete mode 100644 include/linux/netfilter_ipv4/ipt_DSCP.h delete mode 100644 include/linux/netfilter_ipv4/ipt_MARK.h delete mode 100644 include/linux/netfilter_ipv4/ipt_NFQUEUE.h delete mode 100644 include/linux/netfilter_ipv4/ipt_TCPMSS.h delete mode 100644 include/linux/netfilter_ipv4/ipt_comment.h delete mode 100644 include/linux/netfilter_ipv4/ipt_connbytes.h delete mode 100644 include/linux/netfilter_ipv4/ipt_connmark.h delete mode 100644 include/linux/netfilter_ipv4/ipt_conntrack.h delete mode 100644 include/linux/netfilter_ipv4/ipt_dccp.h delete mode 100644 include/linux/netfilter_ipv4/ipt_dscp.h delete mode 100644 include/linux/netfilter_ipv4/ipt_esp.h delete mode 100644 include/linux/netfilter_ipv4/ipt_hashlimit.h delete mode 100644 include/linux/netfilter_ipv4/ipt_helper.h delete mode 100644 include/linux/netfilter_ipv4/ipt_length.h delete mode 100644 include/linux/netfilter_ipv4/ipt_limit.h delete mode 100644 include/linux/netfilter_ipv4/ipt_mac.h delete mode 100644 include/linux/netfilter_ipv4/ipt_mark.h delete mode 100644 include/linux/netfilter_ipv4/ipt_multiport.h delete mode 100644 include/linux/netfilter_ipv4/ipt_physdev.h delete mode 100644 include/linux/netfilter_ipv4/ipt_pkttype.h delete mode 100644 include/linux/netfilter_ipv4/ipt_policy.h delete mode 100644 include/linux/netfilter_ipv4/ipt_recent.h delete mode 100644 include/linux/netfilter_ipv4/ipt_sctp.h delete mode 100644 include/linux/netfilter_ipv4/ipt_state.h delete mode 100644 include/linux/netfilter_ipv4/ipt_string.h delete mode 100644 include/linux/netfilter_ipv4/ipt_tcpmss.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_MARK.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_esp.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_length.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_limit.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_mac.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_mark.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_multiport.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_physdev.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_policy.h (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 5556d2300be..698e1e8b304 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -235,9 +235,6 @@ Who: Thomas Gleixner --------------------------- What (Why): - - "forwarding" header files like ipt_mac.h in - include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/ - - xt_recent: the old ipt_recent proc dir (superseded by /proc/net/xt_recent) diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index 541300531cb..431b4076192 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -1,42 +1,14 @@ -header-y += ipt_CLASSIFY.h header-y += ipt_CLUSTERIP.h -header-y += ipt_CONNMARK.h -header-y += ipt_DSCP.h header-y += ipt_ECN.h header-y += ipt_LOG.h -header-y += ipt_MARK.h -header-y += ipt_NFQUEUE.h header-y += ipt_REJECT.h header-y += ipt_SAME.h -header-y += ipt_TCPMSS.h header-y += ipt_TTL.h header-y += ipt_ULOG.h header-y += ipt_addrtype.h header-y += ipt_ah.h -header-y += ipt_comment.h -header-y += ipt_connbytes.h -header-y += ipt_connmark.h -header-y += ipt_conntrack.h -header-y += ipt_dccp.h -header-y += ipt_dscp.h header-y += ipt_ecn.h -header-y += ipt_esp.h -header-y += ipt_hashlimit.h -header-y += ipt_helper.h -header-y += ipt_length.h -header-y += ipt_limit.h -header-y += ipt_mac.h -header-y += ipt_mark.h -header-y += ipt_multiport.h -header-y += ipt_physdev.h -header-y += ipt_pkttype.h -header-y += ipt_policy.h header-y += ipt_realm.h -header-y += ipt_recent.h -header-y += ipt_sctp.h -header-y += ipt_state.h -header-y += ipt_string.h -header-y += ipt_tcpmss.h header-y += ipt_ttl.h unifdef-y += ip_queue.h diff --git a/include/linux/netfilter_ipv4/ipt_CLASSIFY.h b/include/linux/netfilter_ipv4/ipt_CLASSIFY.h deleted file mode 100644 index a46d511b5c3..00000000000 --- a/include/linux/netfilter_ipv4/ipt_CLASSIFY.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_CLASSIFY_H -#define _IPT_CLASSIFY_H - -#include -#define ipt_classify_target_info xt_classify_target_info - -#endif /*_IPT_CLASSIFY_H */ diff --git a/include/linux/netfilter_ipv4/ipt_CONNMARK.h b/include/linux/netfilter_ipv4/ipt_CONNMARK.h deleted file mode 100644 index 9ecfee0a9e3..00000000000 --- a/include/linux/netfilter_ipv4/ipt_CONNMARK.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _IPT_CONNMARK_H_target -#define _IPT_CONNMARK_H_target - -/* Copyright (C) 2002,2004 MARA Systems AB - * by Henrik Nordstrom - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include -#define IPT_CONNMARK_SET XT_CONNMARK_SET -#define IPT_CONNMARK_SAVE XT_CONNMARK_SAVE -#define IPT_CONNMARK_RESTORE XT_CONNMARK_RESTORE - -#define ipt_connmark_target_info xt_connmark_target_info - -#endif /*_IPT_CONNMARK_H_target*/ diff --git a/include/linux/netfilter_ipv4/ipt_DSCP.h b/include/linux/netfilter_ipv4/ipt_DSCP.h deleted file mode 100644 index 3491e524d5e..00000000000 --- a/include/linux/netfilter_ipv4/ipt_DSCP.h +++ /dev/null @@ -1,18 +0,0 @@ -/* iptables module for setting the IPv4 DSCP field - * - * (C) 2002 Harald Welte - * based on ipt_FTOS.c (C) 2000 by Matthew G. Marsh - * This software is distributed under GNU GPL v2, 1991 - * - * See RFC2474 for a description of the DSCP field within the IP Header. - * - * ipt_DSCP.h,v 1.7 2002/03/14 12:03:13 laforge Exp -*/ -#ifndef _IPT_DSCP_TARGET_H -#define _IPT_DSCP_TARGET_H -#include -#include - -#define ipt_DSCP_info xt_DSCP_info - -#endif /* _IPT_DSCP_TARGET_H */ diff --git a/include/linux/netfilter_ipv4/ipt_ECN.h b/include/linux/netfilter_ipv4/ipt_ECN.h index 94e0d986646..7ca45918ab8 100644 --- a/include/linux/netfilter_ipv4/ipt_ECN.h +++ b/include/linux/netfilter_ipv4/ipt_ECN.h @@ -8,9 +8,9 @@ */ #ifndef _IPT_ECN_TARGET_H #define _IPT_ECN_TARGET_H -#include +#include -#define IPT_ECN_IP_MASK (~IPT_DSCP_MASK) +#define IPT_ECN_IP_MASK (~XT_DSCP_MASK) #define IPT_ECN_OP_SET_IP 0x01 /* set ECN bits of IPv4 header */ #define IPT_ECN_OP_SET_ECE 0x10 /* set ECE bit of TCP header */ diff --git a/include/linux/netfilter_ipv4/ipt_MARK.h b/include/linux/netfilter_ipv4/ipt_MARK.h deleted file mode 100644 index 697a486a96d..00000000000 --- a/include/linux/netfilter_ipv4/ipt_MARK.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _IPT_MARK_H_target -#define _IPT_MARK_H_target - -/* Backwards compatibility for old userspace */ - -#include - -/* Version 0 */ -#define ipt_mark_target_info xt_mark_target_info - -/* Version 1 */ -#define IPT_MARK_SET XT_MARK_SET -#define IPT_MARK_AND XT_MARK_AND -#define IPT_MARK_OR XT_MARK_OR - -#define ipt_mark_target_info_v1 xt_mark_target_info_v1 - -#endif /*_IPT_MARK_H_target*/ diff --git a/include/linux/netfilter_ipv4/ipt_NFQUEUE.h b/include/linux/netfilter_ipv4/ipt_NFQUEUE.h deleted file mode 100644 index 97a2a7557cb..00000000000 --- a/include/linux/netfilter_ipv4/ipt_NFQUEUE.h +++ /dev/null @@ -1,16 +0,0 @@ -/* iptables module for using NFQUEUE mechanism - * - * (C) 2005 Harald Welte - * - * This software is distributed under GNU GPL v2, 1991 - * -*/ -#ifndef _IPT_NFQ_TARGET_H -#define _IPT_NFQ_TARGET_H - -/* Backwards compatibility for old userspace */ -#include - -#define ipt_NFQ_info xt_NFQ_info - -#endif /* _IPT_DSCP_TARGET_H */ diff --git a/include/linux/netfilter_ipv4/ipt_TCPMSS.h b/include/linux/netfilter_ipv4/ipt_TCPMSS.h deleted file mode 100644 index 7a850f94582..00000000000 --- a/include/linux/netfilter_ipv4/ipt_TCPMSS.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _IPT_TCPMSS_H -#define _IPT_TCPMSS_H - -#include - -#define ipt_tcpmss_info xt_tcpmss_info -#define IPT_TCPMSS_CLAMP_PMTU XT_TCPMSS_CLAMP_PMTU - -#endif /*_IPT_TCPMSS_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_comment.h b/include/linux/netfilter_ipv4/ipt_comment.h deleted file mode 100644 index ae2afc2f748..00000000000 --- a/include/linux/netfilter_ipv4/ipt_comment.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _IPT_COMMENT_H -#define _IPT_COMMENT_H - -#include - -#define IPT_MAX_COMMENT_LEN XT_MAX_COMMENT_LEN - -#define ipt_comment_info xt_comment_info - -#endif /* _IPT_COMMENT_H */ diff --git a/include/linux/netfilter_ipv4/ipt_connbytes.h b/include/linux/netfilter_ipv4/ipt_connbytes.h deleted file mode 100644 index f63e6ee9111..00000000000 --- a/include/linux/netfilter_ipv4/ipt_connbytes.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _IPT_CONNBYTES_H -#define _IPT_CONNBYTES_H - -#include -#define ipt_connbytes_what xt_connbytes_what - -#define IPT_CONNBYTES_PKTS XT_CONNBYTES_PKTS -#define IPT_CONNBYTES_BYTES XT_CONNBYTES_BYTES -#define IPT_CONNBYTES_AVGPKT XT_CONNBYTES_AVGPKT - -#define ipt_connbytes_direction xt_connbytes_direction -#define IPT_CONNBYTES_DIR_ORIGINAL XT_CONNBYTES_DIR_ORIGINAL -#define IPT_CONNBYTES_DIR_REPLY XT_CONNBYTES_DIR_REPLY -#define IPT_CONNBYTES_DIR_BOTH XT_CONNBYTES_DIR_BOTH - -#define ipt_connbytes_info xt_connbytes_info - -#endif diff --git a/include/linux/netfilter_ipv4/ipt_connmark.h b/include/linux/netfilter_ipv4/ipt_connmark.h deleted file mode 100644 index c7ba6560d44..00000000000 --- a/include/linux/netfilter_ipv4/ipt_connmark.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_CONNMARK_H -#define _IPT_CONNMARK_H - -#include -#define ipt_connmark_info xt_connmark_info - -#endif /*_IPT_CONNMARK_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_conntrack.h b/include/linux/netfilter_ipv4/ipt_conntrack.h deleted file mode 100644 index cde6762949c..00000000000 --- a/include/linux/netfilter_ipv4/ipt_conntrack.h +++ /dev/null @@ -1,28 +0,0 @@ -/* Header file for kernel module to match connection tracking information. - * GPL (C) 2001 Marc Boucher (marc@mbsi.ca). - */ - -#ifndef _IPT_CONNTRACK_H -#define _IPT_CONNTRACK_H - -#include - -#define IPT_CONNTRACK_STATE_BIT(ctinfo) XT_CONNTRACK_STATE_BIT(ctinfo) -#define IPT_CONNTRACK_STATE_INVALID XT_CONNTRACK_STATE_INVALID - -#define IPT_CONNTRACK_STATE_SNAT XT_CONNTRACK_STATE_SNAT -#define IPT_CONNTRACK_STATE_DNAT XT_CONNTRACK_STATE_DNAT -#define IPT_CONNTRACK_STATE_UNTRACKED XT_CONNTRACK_STATE_UNTRACKED - -/* flags, invflags: */ -#define IPT_CONNTRACK_STATE XT_CONNTRACK_STATE -#define IPT_CONNTRACK_PROTO XT_CONNTRACK_PROTO -#define IPT_CONNTRACK_ORIGSRC XT_CONNTRACK_ORIGSRC -#define IPT_CONNTRACK_ORIGDST XT_CONNTRACK_ORIGDST -#define IPT_CONNTRACK_REPLSRC XT_CONNTRACK_REPLSRC -#define IPT_CONNTRACK_REPLDST XT_CONNTRACK_REPLDST -#define IPT_CONNTRACK_STATUS XT_CONNTRACK_STATUS -#define IPT_CONNTRACK_EXPIRES XT_CONNTRACK_EXPIRES - -#define ipt_conntrack_info xt_conntrack_info -#endif /*_IPT_CONNTRACK_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_dccp.h b/include/linux/netfilter_ipv4/ipt_dccp.h deleted file mode 100644 index e70d11e1f53..00000000000 --- a/include/linux/netfilter_ipv4/ipt_dccp.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _IPT_DCCP_H_ -#define _IPT_DCCP_H_ - -#include -#define IPT_DCCP_SRC_PORTS XT_DCCP_SRC_PORTS -#define IPT_DCCP_DEST_PORTS XT_DCCP_DEST_PORTS -#define IPT_DCCP_TYPE XT_DCCP_TYPE -#define IPT_DCCP_OPTION XT_DCCP_OPTION - -#define IPT_DCCP_VALID_FLAGS XT_DCCP_VALID_FLAGS - -#define ipt_dccp_info xt_dccp_info - -#endif /* _IPT_DCCP_H_ */ - diff --git a/include/linux/netfilter_ipv4/ipt_dscp.h b/include/linux/netfilter_ipv4/ipt_dscp.h deleted file mode 100644 index 4b82ca912b0..00000000000 --- a/include/linux/netfilter_ipv4/ipt_dscp.h +++ /dev/null @@ -1,21 +0,0 @@ -/* iptables module for matching the IPv4 DSCP field - * - * (C) 2002 Harald Welte - * This software is distributed under GNU GPL v2, 1991 - * - * See RFC2474 for a description of the DSCP field within the IP Header. - * - * ipt_dscp.h,v 1.3 2002/08/05 19:00:21 laforge Exp -*/ -#ifndef _IPT_DSCP_H -#define _IPT_DSCP_H - -#include - -#define IPT_DSCP_MASK XT_DSCP_MASK -#define IPT_DSCP_SHIFT XT_DSCP_SHIFT -#define IPT_DSCP_MAX XT_DSCP_MAX - -#define ipt_dscp_info xt_dscp_info - -#endif /* _IPT_DSCP_H */ diff --git a/include/linux/netfilter_ipv4/ipt_ecn.h b/include/linux/netfilter_ipv4/ipt_ecn.h index 1f0d9a4d337..9945baa4ccd 100644 --- a/include/linux/netfilter_ipv4/ipt_ecn.h +++ b/include/linux/netfilter_ipv4/ipt_ecn.h @@ -8,9 +8,9 @@ */ #ifndef _IPT_ECN_H #define _IPT_ECN_H -#include +#include -#define IPT_ECN_IP_MASK (~IPT_DSCP_MASK) +#define IPT_ECN_IP_MASK (~XT_DSCP_MASK) #define IPT_ECN_OP_MATCH_IP 0x01 #define IPT_ECN_OP_MATCH_ECE 0x10 diff --git a/include/linux/netfilter_ipv4/ipt_esp.h b/include/linux/netfilter_ipv4/ipt_esp.h deleted file mode 100644 index 78296e7eeff..00000000000 --- a/include/linux/netfilter_ipv4/ipt_esp.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _IPT_ESP_H -#define _IPT_ESP_H - -#include - -#define ipt_esp xt_esp -#define IPT_ESP_INV_SPI XT_ESP_INV_SPI -#define IPT_ESP_INV_MASK XT_ESP_INV_MASK - -#endif /*_IPT_ESP_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_hashlimit.h b/include/linux/netfilter_ipv4/ipt_hashlimit.h deleted file mode 100644 index 5662120a3d7..00000000000 --- a/include/linux/netfilter_ipv4/ipt_hashlimit.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _IPT_HASHLIMIT_H -#define _IPT_HASHLIMIT_H - -#include - -#define IPT_HASHLIMIT_SCALE XT_HASHLIMIT_SCALE -#define IPT_HASHLIMIT_HASH_DIP XT_HASHLIMIT_HASH_DIP -#define IPT_HASHLIMIT_HASH_DPT XT_HASHLIMIT_HASH_DPT -#define IPT_HASHLIMIT_HASH_SIP XT_HASHLIMIT_HASH_SIP -#define IPT_HASHLIMIT_HASH_SPT XT_HASHLIMIT_HASH_SPT - -#define ipt_hashlimit_info xt_hashlimit_info - -#endif /* _IPT_HASHLIMIT_H */ diff --git a/include/linux/netfilter_ipv4/ipt_helper.h b/include/linux/netfilter_ipv4/ipt_helper.h deleted file mode 100644 index 80452c21855..00000000000 --- a/include/linux/netfilter_ipv4/ipt_helper.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_HELPER_H -#define _IPT_HELPER_H - -#include -#define ipt_helper_info xt_helper_info - -#endif /* _IPT_HELPER_H */ diff --git a/include/linux/netfilter_ipv4/ipt_length.h b/include/linux/netfilter_ipv4/ipt_length.h deleted file mode 100644 index 9b45206ffce..00000000000 --- a/include/linux/netfilter_ipv4/ipt_length.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_LENGTH_H -#define _IPT_LENGTH_H - -#include -#define ipt_length_info xt_length_info - -#endif /*_IPT_LENGTH_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_limit.h b/include/linux/netfilter_ipv4/ipt_limit.h deleted file mode 100644 index 92f5cd07bbc..00000000000 --- a/include/linux/netfilter_ipv4/ipt_limit.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _IPT_RATE_H -#define _IPT_RATE_H - -#include -#define IPT_LIMIT_SCALE XT_LIMIT_SCALE -#define ipt_rateinfo xt_rateinfo - -#endif /*_IPT_RATE_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_mac.h b/include/linux/netfilter_ipv4/ipt_mac.h deleted file mode 100644 index b186008a3c4..00000000000 --- a/include/linux/netfilter_ipv4/ipt_mac.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_MAC_H -#define _IPT_MAC_H - -#include -#define ipt_mac_info xt_mac_info - -#endif /*_IPT_MAC_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_mark.h b/include/linux/netfilter_ipv4/ipt_mark.h deleted file mode 100644 index bfde67c6122..00000000000 --- a/include/linux/netfilter_ipv4/ipt_mark.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _IPT_MARK_H -#define _IPT_MARK_H - -/* Backwards compatibility for old userspace */ -#include - -#define ipt_mark_info xt_mark_info - -#endif /*_IPT_MARK_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_multiport.h b/include/linux/netfilter_ipv4/ipt_multiport.h deleted file mode 100644 index 55fe85eca88..00000000000 --- a/include/linux/netfilter_ipv4/ipt_multiport.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _IPT_MULTIPORT_H -#define _IPT_MULTIPORT_H - -#include - -#define IPT_MULTIPORT_SOURCE XT_MULTIPORT_SOURCE -#define IPT_MULTIPORT_DESTINATION XT_MULTIPORT_DESTINATION -#define IPT_MULTIPORT_EITHER XT_MULTIPORT_EITHER - -#define IPT_MULTI_PORTS XT_MULTI_PORTS - -#define ipt_multiport xt_multiport -#define ipt_multiport_v1 xt_multiport_v1 - -#endif /*_IPT_MULTIPORT_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_physdev.h b/include/linux/netfilter_ipv4/ipt_physdev.h deleted file mode 100644 index 2400e7140f2..00000000000 --- a/include/linux/netfilter_ipv4/ipt_physdev.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _IPT_PHYSDEV_H -#define _IPT_PHYSDEV_H - -/* Backwards compatibility for old userspace */ - -#include - -#define IPT_PHYSDEV_OP_IN XT_PHYSDEV_OP_IN -#define IPT_PHYSDEV_OP_OUT XT_PHYSDEV_OP_OUT -#define IPT_PHYSDEV_OP_BRIDGED XT_PHYSDEV_OP_BRIDGED -#define IPT_PHYSDEV_OP_ISIN XT_PHYSDEV_OP_ISIN -#define IPT_PHYSDEV_OP_ISOUT XT_PHYSDEV_OP_ISOUT -#define IPT_PHYSDEV_OP_MASK XT_PHYSDEV_OP_MASK - -#define ipt_physdev_info xt_physdev_info - -#endif /*_IPT_PHYSDEV_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_pkttype.h b/include/linux/netfilter_ipv4/ipt_pkttype.h deleted file mode 100644 index ff1fbc949a0..00000000000 --- a/include/linux/netfilter_ipv4/ipt_pkttype.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_PKTTYPE_H -#define _IPT_PKTTYPE_H - -#include -#define ipt_pkttype_info xt_pkttype_info - -#endif /*_IPT_PKTTYPE_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_policy.h b/include/linux/netfilter_ipv4/ipt_policy.h deleted file mode 100644 index 1037fb2cd20..00000000000 --- a/include/linux/netfilter_ipv4/ipt_policy.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _IPT_POLICY_H -#define _IPT_POLICY_H - -#include - -#define IPT_POLICY_MAX_ELEM XT_POLICY_MAX_ELEM - -/* ipt_policy_flags */ -#define IPT_POLICY_MATCH_IN XT_POLICY_MATCH_IN -#define IPT_POLICY_MATCH_OUT XT_POLICY_MATCH_OUT -#define IPT_POLICY_MATCH_NONE XT_POLICY_MATCH_NONE -#define IPT_POLICY_MATCH_STRICT XT_POLICY_MATCH_STRICT - -/* ipt_policy_modes */ -#define IPT_POLICY_MODE_TRANSPORT XT_POLICY_MODE_TRANSPORT -#define IPT_POLICY_MODE_TUNNEL XT_POLICY_MODE_TUNNEL - -#define ipt_policy_spec xt_policy_spec -#define ipt_policy_addr xt_policy_addr -#define ipt_policy_elem xt_policy_elem -#define ipt_policy_info xt_policy_info - -#endif /* _IPT_POLICY_H */ diff --git a/include/linux/netfilter_ipv4/ipt_recent.h b/include/linux/netfilter_ipv4/ipt_recent.h deleted file mode 100644 index d636cca133c..00000000000 --- a/include/linux/netfilter_ipv4/ipt_recent.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _IPT_RECENT_H -#define _IPT_RECENT_H - -#include - -#define ipt_recent_info xt_recent_mtinfo - -enum { - IPT_RECENT_CHECK = XT_RECENT_CHECK, - IPT_RECENT_SET = XT_RECENT_SET, - IPT_RECENT_UPDATE = XT_RECENT_UPDATE, - IPT_RECENT_REMOVE = XT_RECENT_REMOVE, - IPT_RECENT_TTL = XT_RECENT_TTL, - - IPT_RECENT_SOURCE = XT_RECENT_SOURCE, - IPT_RECENT_DEST = XT_RECENT_DEST, - - IPT_RECENT_NAME_LEN = XT_RECENT_NAME_LEN, -}; - -#endif /*_IPT_RECENT_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_sctp.h b/include/linux/netfilter_ipv4/ipt_sctp.h deleted file mode 100644 index 80b3dbacd19..00000000000 --- a/include/linux/netfilter_ipv4/ipt_sctp.h +++ /dev/null @@ -1,105 +0,0 @@ -#ifndef _IPT_SCTP_H_ -#define _IPT_SCTP_H_ - -#define IPT_SCTP_SRC_PORTS 0x01 -#define IPT_SCTP_DEST_PORTS 0x02 -#define IPT_SCTP_CHUNK_TYPES 0x04 - -#define IPT_SCTP_VALID_FLAGS 0x07 - - -struct ipt_sctp_flag_info { - u_int8_t chunktype; - u_int8_t flag; - u_int8_t flag_mask; -}; - -#define IPT_NUM_SCTP_FLAGS 4 - -struct ipt_sctp_info { - u_int16_t dpts[2]; /* Min, Max */ - u_int16_t spts[2]; /* Min, Max */ - - u_int32_t chunkmap[256 / sizeof (u_int32_t)]; /* Bit mask of chunks to be matched according to RFC 2960 */ - -#define SCTP_CHUNK_MATCH_ANY 0x01 /* Match if any of the chunk types are present */ -#define SCTP_CHUNK_MATCH_ALL 0x02 /* Match if all of the chunk types are present */ -#define SCTP_CHUNK_MATCH_ONLY 0x04 /* Match if these are the only chunk types present */ - - u_int32_t chunk_match_type; - struct ipt_sctp_flag_info flag_info[IPT_NUM_SCTP_FLAGS]; - int flag_count; - - u_int32_t flags; - u_int32_t invflags; -}; - -#define bytes(type) (sizeof(type) * 8) - -#define SCTP_CHUNKMAP_SET(chunkmap, type) \ - do { \ - chunkmap[type / bytes(u_int32_t)] |= \ - 1 << (type % bytes(u_int32_t)); \ - } while (0) - -#define SCTP_CHUNKMAP_CLEAR(chunkmap, type) \ - do { \ - chunkmap[type / bytes(u_int32_t)] &= \ - ~(1 << (type % bytes(u_int32_t))); \ - } while (0) - -#define SCTP_CHUNKMAP_IS_SET(chunkmap, type) \ -({ \ - (chunkmap[type / bytes (u_int32_t)] & \ - (1 << (type % bytes (u_int32_t)))) ? 1: 0; \ -}) - -#define SCTP_CHUNKMAP_RESET(chunkmap) \ - do { \ - int i; \ - for (i = 0; i < ARRAY_SIZE(chunkmap); i++) \ - chunkmap[i] = 0; \ - } while (0) - -#define SCTP_CHUNKMAP_SET_ALL(chunkmap) \ - do { \ - int i; \ - for (i = 0; i < ARRAY_SIZE(chunkmap); i++) \ - chunkmap[i] = ~0; \ - } while (0) - -#define SCTP_CHUNKMAP_COPY(destmap, srcmap) \ - do { \ - int i; \ - for (i = 0; i < ARRAY_SIZE(chunkmap); i++) \ - destmap[i] = srcmap[i]; \ - } while (0) - -#define SCTP_CHUNKMAP_IS_CLEAR(chunkmap) \ -({ \ - int i; \ - int flag = 1; \ - for (i = 0; i < ARRAY_SIZE(chunkmap); i++) { \ - if (chunkmap[i]) { \ - flag = 0; \ - break; \ - } \ - } \ - flag; \ -}) - -#define SCTP_CHUNKMAP_IS_ALL_SET(chunkmap) \ -({ \ - int i; \ - int flag = 1; \ - for (i = 0; i < ARRAY_SIZE(chunkmap); i++) { \ - if (chunkmap[i] != ~0) { \ - flag = 0; \ - break; \ - } \ - } \ - flag; \ -}) - -#endif /* _IPT_SCTP_H_ */ - diff --git a/include/linux/netfilter_ipv4/ipt_state.h b/include/linux/netfilter_ipv4/ipt_state.h deleted file mode 100644 index a44a99cc28c..00000000000 --- a/include/linux/netfilter_ipv4/ipt_state.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _IPT_STATE_H -#define _IPT_STATE_H - -/* Backwards compatibility for old userspace */ - -#include - -#define IPT_STATE_BIT XT_STATE_BIT -#define IPT_STATE_INVALID XT_STATE_INVALID - -#define IPT_STATE_UNTRACKED XT_STATE_UNTRACKED - -#define ipt_state_info xt_state_info - -#endif /*_IPT_STATE_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_string.h b/include/linux/netfilter_ipv4/ipt_string.h deleted file mode 100644 index c26de305990..00000000000 --- a/include/linux/netfilter_ipv4/ipt_string.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _IPT_STRING_H -#define _IPT_STRING_H - -#include - -#define IPT_STRING_MAX_PATTERN_SIZE XT_STRING_MAX_PATTERN_SIZE -#define IPT_STRING_MAX_ALGO_NAME_SIZE XT_STRING_MAX_ALGO_NAME_SIZE -#define ipt_string_info xt_string_info - -#endif /*_IPT_STRING_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_tcpmss.h b/include/linux/netfilter_ipv4/ipt_tcpmss.h deleted file mode 100644 index 18bbc8e8e00..00000000000 --- a/include/linux/netfilter_ipv4/ipt_tcpmss.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_TCPMSS_MATCH_H -#define _IPT_TCPMSS_MATCH_H - -#include -#define ipt_tcpmss_match_info xt_tcpmss_match_info - -#endif /*_IPT_TCPMSS_MATCH_H*/ diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild index 4610a16da0a..e864eaee9e5 100644 --- a/include/linux/netfilter_ipv6/Kbuild +++ b/include/linux/netfilter_ipv6/Kbuild @@ -1,21 +1,12 @@ header-y += ip6t_HL.h header-y += ip6t_LOG.h -header-y += ip6t_MARK.h header-y += ip6t_REJECT.h header-y += ip6t_ah.h -header-y += ip6t_esp.h header-y += ip6t_frag.h -header-y += ip6t_hl.h header-y += ip6t_ipv6header.h -header-y += ip6t_length.h -header-y += ip6t_limit.h -header-y += ip6t_mac.h -header-y += ip6t_mark.h +header-y += ip6t_hl.h header-y += ip6t_mh.h -header-y += ip6t_multiport.h header-y += ip6t_opts.h -header-y += ip6t_physdev.h -header-y += ip6t_policy.h header-y += ip6t_rt.h unifdef-y += ip6_tables.h diff --git a/include/linux/netfilter_ipv6/ip6t_MARK.h b/include/linux/netfilter_ipv6/ip6t_MARK.h deleted file mode 100644 index 7cf629a8ab9..00000000000 --- a/include/linux/netfilter_ipv6/ip6t_MARK.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _IP6T_MARK_H_target -#define _IP6T_MARK_H_target - -/* Backwards compatibility for old userspace */ -#include - -#define ip6t_mark_target_info xt_mark_target_info - -#endif /*_IP6T_MARK_H_target*/ diff --git a/include/linux/netfilter_ipv6/ip6t_esp.h b/include/linux/netfilter_ipv6/ip6t_esp.h deleted file mode 100644 index f62eaf53c16..00000000000 --- a/include/linux/netfilter_ipv6/ip6t_esp.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _IP6T_ESP_H -#define _IP6T_ESP_H - -#include - -#define ip6t_esp xt_esp -#define IP6T_ESP_INV_SPI XT_ESP_INV_SPI -#define IP6T_ESP_INV_MASK XT_ESP_INV_MASK - -#endif /*_IP6T_ESP_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_length.h b/include/linux/netfilter_ipv6/ip6t_length.h deleted file mode 100644 index 9e9689d03ed..00000000000 --- a/include/linux/netfilter_ipv6/ip6t_length.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _IP6T_LENGTH_H -#define _IP6T_LENGTH_H - -#include -#define ip6t_length_info xt_length_info - -#endif /*_IP6T_LENGTH_H*/ - diff --git a/include/linux/netfilter_ipv6/ip6t_limit.h b/include/linux/netfilter_ipv6/ip6t_limit.h deleted file mode 100644 index 487e5ea342c..00000000000 --- a/include/linux/netfilter_ipv6/ip6t_limit.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _IP6T_RATE_H -#define _IP6T_RATE_H - -#include -#define IP6T_LIMIT_SCALE XT_LIMIT_SCALE -#define ip6t_rateinfo xt_rateinfo - -#endif /*_IP6T_RATE_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_mac.h b/include/linux/netfilter_ipv6/ip6t_mac.h deleted file mode 100644 index ac58e83e942..00000000000 --- a/include/linux/netfilter_ipv6/ip6t_mac.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IP6T_MAC_H -#define _IP6T_MAC_H - -#include -#define ip6t_mac_info xt_mac_info - -#endif /*_IP6T_MAC_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_mark.h b/include/linux/netfilter_ipv6/ip6t_mark.h deleted file mode 100644 index ff204951ddc..00000000000 --- a/include/linux/netfilter_ipv6/ip6t_mark.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _IP6T_MARK_H -#define _IP6T_MARK_H - -/* Backwards compatibility for old userspace */ -#include - -#define ip6t_mark_info xt_mark_info - -#endif /*_IPT_MARK_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_multiport.h b/include/linux/netfilter_ipv6/ip6t_multiport.h deleted file mode 100644 index 042c92661ce..00000000000 --- a/include/linux/netfilter_ipv6/ip6t_multiport.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _IP6T_MULTIPORT_H -#define _IP6T_MULTIPORT_H - -#include - -#define IP6T_MULTIPORT_SOURCE XT_MULTIPORT_SOURCE -#define IP6T_MULTIPORT_DESTINATION XT_MULTIPORT_DESTINATION -#define IP6T_MULTIPORT_EITHER XT_MULTIPORT_EITHER - -#define IP6T_MULTI_PORTS XT_MULTI_PORTS - -#define ip6t_multiport xt_multiport - -#endif /*_IP6T_MULTIPORT_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_physdev.h b/include/linux/netfilter_ipv6/ip6t_physdev.h deleted file mode 100644 index c161c0a81b5..00000000000 --- a/include/linux/netfilter_ipv6/ip6t_physdev.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _IP6T_PHYSDEV_H -#define _IP6T_PHYSDEV_H - -/* Backwards compatibility for old userspace */ - -#include - -#define IP6T_PHYSDEV_OP_IN XT_PHYSDEV_OP_IN -#define IP6T_PHYSDEV_OP_OUT XT_PHYSDEV_OP_OUT -#define IP6T_PHYSDEV_OP_BRIDGED XT_PHYSDEV_OP_BRIDGED -#define IP6T_PHYSDEV_OP_ISIN XT_PHYSDEV_OP_ISIN -#define IP6T_PHYSDEV_OP_ISOUT XT_PHYSDEV_OP_ISOUT -#define IP6T_PHYSDEV_OP_MASK XT_PHYSDEV_OP_MASK - -#define ip6t_physdev_info xt_physdev_info - -#endif /*_IP6T_PHYSDEV_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_policy.h b/include/linux/netfilter_ipv6/ip6t_policy.h deleted file mode 100644 index b1c449d7ec8..00000000000 --- a/include/linux/netfilter_ipv6/ip6t_policy.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _IP6T_POLICY_H -#define _IP6T_POLICY_H - -#include - -#define IP6T_POLICY_MAX_ELEM XT_POLICY_MAX_ELEM - -/* ip6t_policy_flags */ -#define IP6T_POLICY_MATCH_IN XT_POLICY_MATCH_IN -#define IP6T_POLICY_MATCH_OUT XT_POLICY_MATCH_OUT -#define IP6T_POLICY_MATCH_NONE XT_POLICY_MATCH_NONE -#define IP6T_POLICY_MATCH_STRICT XT_POLICY_MATCH_STRICT - -/* ip6t_policy_modes */ -#define IP6T_POLICY_MODE_TRANSPORT XT_POLICY_MODE_TRANSPORT -#define IP6T_POLICY_MODE_TUNNEL XT_POLICY_MODE_TUNNEL - -#define ip6t_policy_spec xt_policy_spec -#define ip6t_policy_addr xt_policy_addr -#define ip6t_policy_elem xt_policy_elem -#define ip6t_policy_info xt_policy_info - -#endif /* _IP6T_POLICY_H */ -- cgit v1.2.3-70-g09d2 From 93fe4483e6fd3e71d17cd919de14b3b1f9eb3795 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 6 Aug 2009 18:14:26 +0900 Subject: sound: make OSS device number claiming optional and schedule its removal If any OSS support is enabled, regardless of built-in or module, sound_core claims full OSS major number (that is, the old 0-255 region) to trap open attempts and request sound modules using custom module aliases. This feature is redundant as chrdev already has such mechanism. This preemptive claiming prevents alternative OSS implementation. The custom module aliases are scheduled to be removed and the previous patch made soundcore emit the standard chrdev aliases too to help transition. This patch schedule the feature for removal in a year and makes it optional so that developers and distros can try new things in the meantime without rebuilding the kernel. The pre-claiming can be turned off by using SOUND_OSS_CORE_PRECLAIM and/or kernel parameter soundcore.preclaim_oss. As this allows sound minors to be individually grabbed by other users, this patch updates sound_insert_unit() such that if registering individual device region fails, it tries the next available slot. For details on removal plan, please read the entry added by this patch in feature-removal-schedule.txt . Signed-off-by: Tejun Heo Cc: Alan Cox Signed-off-by: Takashi Iwai --- Documentation/feature-removal-schedule.txt | 24 ++++++++ sound/Kconfig | 28 ++++++++++ sound/sound_core.c | 88 ++++++++++++++++++++++++------ 3 files changed, 122 insertions(+), 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 09e031c5588..f0690bbbd73 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -468,3 +468,27 @@ Why: cpu_policy_rwsem has a new cleaner definition making it local to cpufreq core and contained inside cpufreq.c. Other dependent drivers should not use it in order to safely avoid lockdep issues. Who: Venkatesh Pallipadi + +---------------------------- + +What: sound-slot/service-* module aliases and related clutters in + sound/sound_core.c +When: August 2010 +Why: OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR + (14) and requests modules using custom sound-slot/service-* + module aliases. The only benefit of doing this is allowing + use of custom module aliases which might as well be considered + a bug at this point. This preemptive claiming prevents + alternative OSS implementations. + + Till the feature is removed, the kernel will be requesting + both sound-slot/service-* and the standard char-major-* module + aliases and allow turning off the pre-claiming selectively via + CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss + kernel parameter. + + After the transition phase is complete, both the custom module + aliases and switches to disable it will go away. This removal + will also allow making ALSA OSS emulation independent of + sound_core. The dependency will be broken then too. +Who: Tejun Heo diff --git a/sound/Kconfig b/sound/Kconfig index 1eceb85287c..439e15c8faa 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -32,6 +32,34 @@ config SOUND_OSS_CORE bool default n +config SOUND_OSS_CORE_PRECLAIM + bool "Preclaim OSS device numbers" + depends on SOUND_OSS_CORE + default y + help + With this option enabled, the kernel will claim all OSS device + numbers if any OSS support (native or emulation) is enabled + whether the respective module is loaded or not and try to load the + appropriate module using sound-slot/service-* and char-major-* + module aliases when one of the device numbers is opened. With + this option disabled, kernel will only claim actually in-use + device numbers and opening a missing device will generate only the + standard char-major-* aliases. + + The only visible difference is use of additional module aliases + and whether OSS sound devices appear multiple times in + /proc/devices. sound-slot/service-* module aliases are scheduled + to be removed (ie. PRECLAIM won't be available) and this option is + to make the transition easier. This option can be overridden + during boot using the kernel parameter soundcore.preclaim_oss. + + Disabling this allows alternative OSS implementations. + + Please read Documentation/feature-removal-schedule.txt for + details. + + If unusre, say Y. + source "sound/oss/dmasound/Kconfig" if !M68K diff --git a/sound/sound_core.c b/sound/sound_core.c index 786067c49b0..bb4b88e606b 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -127,6 +127,46 @@ extern int msnd_classic_init(void); extern int msnd_pinnacle_init(void); #endif +/* + * By default, OSS sound_core claims full legacy minor range (0-255) + * of SOUND_MAJOR to trap open attempts to any sound minor and + * requests modules using custom sound-slot/service-* module aliases. + * The only benefit of doing this is allowing use of custom module + * aliases instead of the standard char-major-* ones. This behavior + * prevents alternative OSS implementation and is scheduled to be + * removed. + * + * CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss kernel + * parameter are added to allow distros and developers to try and + * switch to alternative implementations without needing to rebuild + * the kernel in the meantime. If preclaim_oss is non-zero, the + * kernel will behave the same as before. All SOUND_MAJOR minors are + * preclaimed and the custom module aliases along with standard chrdev + * ones are emitted if a missing device is opened. If preclaim_oss is + * zero, sound_core only grabs what's actually in use and for missing + * devices only the standard chrdev aliases are requested. + * + * All these clutters are scheduled to be removed along with + * sound-slot/service-* module aliases. Please take a look at + * feature-removal-schedule.txt for details. + */ +#ifdef CONFIG_SOUND_OSS_CORE_PRECLAIM +static int preclaim_oss = 1; +#else +static int preclaim_oss = 0; +#endif + +module_param(preclaim_oss, int, 0444); + +static int soundcore_open(struct inode *, struct file *); + +static const struct file_operations soundcore_fops = +{ + /* We must have an owner or the module locking fails */ + .owner = THIS_MODULE, + .open = soundcore_open, +}; + /* * Low level list operator. Scan the ordered list, find a hole and * join into it. Called with the lock asserted @@ -219,8 +259,9 @@ static int sound_insert_unit(struct sound_unit **list, const struct file_operati if (!s) return -ENOMEM; - + spin_lock(&sound_loader_lock); +retry: r = __sound_insert_unit(s, list, fops, index, low, top); spin_unlock(&sound_loader_lock); @@ -231,11 +272,31 @@ static int sound_insert_unit(struct sound_unit **list, const struct file_operati else sprintf(s->name, "sound/%s%d", name, r / SOUND_STEP); + if (!preclaim_oss) { + /* + * Something else might have grabbed the minor. If + * first free slot is requested, rescan with @low set + * to the next unit; otherwise, -EBUSY. + */ + r = __register_chrdev(SOUND_MAJOR, s->unit_minor, 1, s->name, + &soundcore_fops); + if (r < 0) { + spin_lock(&sound_loader_lock); + __sound_remove_unit(list, s->unit_minor); + if (index < 0) { + low = s->unit_minor + SOUND_STEP; + goto retry; + } + spin_unlock(&sound_loader_lock); + return -EBUSY; + } + } + device_create(sound_class, dev, MKDEV(SOUND_MAJOR, s->unit_minor), NULL, s->name+6); - return r; + return s->unit_minor; - fail: +fail: kfree(s); return r; } @@ -254,6 +315,9 @@ static void sound_remove_unit(struct sound_unit **list, int unit) p = __sound_remove_unit(list, unit); spin_unlock(&sound_loader_lock); if (p) { + if (!preclaim_oss) + __unregister_chrdev(SOUND_MAJOR, p->unit_minor, 1, + p->name); device_destroy(sound_class, MKDEV(SOUND_MAJOR, p->unit_minor)); kfree(p); } @@ -491,19 +555,6 @@ void unregister_sound_dsp(int unit) EXPORT_SYMBOL(unregister_sound_dsp); -/* - * Now our file operations - */ - -static int soundcore_open(struct inode *, struct file *); - -static const struct file_operations soundcore_fops= -{ - /* We must have an owner or the module locking fails */ - .owner = THIS_MODULE, - .open = soundcore_open, -}; - static struct sound_unit *__look_for_unit(int chain, int unit) { struct sound_unit *s; @@ -539,7 +590,7 @@ static int soundcore_open(struct inode *inode, struct file *file) s = __look_for_unit(chain, unit); if (s) new_fops = fops_get(s->unit_fops); - if (!new_fops) { + if (preclaim_oss && !new_fops) { spin_unlock(&sound_loader_lock); /* @@ -605,7 +656,8 @@ static void cleanup_oss_soundcore(void) static int __init init_oss_soundcore(void) { - if (register_chrdev(SOUND_MAJOR, "sound", &soundcore_fops)==-1) { + if (preclaim_oss && + register_chrdev(SOUND_MAJOR, "sound", &soundcore_fops) == -1) { printk(KERN_ERR "soundcore: sound device already in use.\n"); return -EBUSY; } -- cgit v1.2.3-70-g09d2 From 48a2f112db5349efb2efadbd94b8cc31a9db84e1 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 7 Aug 2009 02:58:39 +0000 Subject: documentation: fix wrt. headers rename Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: David S. Miller --- Documentation/networking/ieee802154.txt | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt index 1d4ed66b1b1..1c0c82c8bc7 100644 --- a/Documentation/networking/ieee802154.txt +++ b/Documentation/networking/ieee802154.txt @@ -22,7 +22,7 @@ int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0); ..... The address family, socket addresses etc. are defined in the -include/net/ieee802154/af_ieee802154.h header or in the special header +include/net/af_ieee802154.h header or in the special header in our userspace package (see either linux-zigbee sourceforge download page or git tree at git://linux-zigbee.git.sourceforge.net/gitroot/linux-zigbee). @@ -33,7 +33,7 @@ MLME - MAC Level Management ============================ Most of IEEE 802.15.4 MLME interfaces are directly mapped on netlink commands. -See the include/net/ieee802154/nl802154.h header. Our userspace tools package +See the include/net/nl802154.h header. Our userspace tools package (see above) provides CLI configuration utility for radio interfaces and simple coordinator for IEEE 802.15.4 networks as an example users of MLME protocol. @@ -54,7 +54,7 @@ Those types of devices require different approach to be hooked into Linux kernel HardMAC ======= -See the header include/net/ieee802154/netdevice.h. You have to implement Linux +See the header include/net/ieee802154_netdev.h. You have to implement Linux net_device, with .type = ARPHRD_IEEE802154. Data is exchanged with socket family code via plain sk_buffs. The control block of sk_buffs will contain additional info as described in the struct ieee802154_mac_cb. @@ -72,5 +72,4 @@ SoftMAC We are going to provide intermediate layer implementing IEEE 802.15.4 MAC in software. This is currently WIP. -See header include/net/ieee802154/mac802154.h and several drivers in -drivers/ieee802154/ +See header include/net/mac802154.h and several drivers in drivers/ieee802154/. -- cgit v1.2.3-70-g09d2 From 00ae4064b1445524752575dd84df227c0687c99d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:49 +0900 Subject: percpu: rename 4k first chunk allocator to page Page size isn't always 4k depending on arch and configuration. Rename 4k first chunk allocator to page. Signed-off-by: Tejun Heo Cc: David Howells --- Documentation/kernel-parameters.txt | 2 +- arch/x86/kernel/setup_percpu.c | 23 ++++++++++++----------- include/linux/percpu.h | 2 +- mm/percpu.c | 25 ++++++++++++++----------- 4 files changed, 28 insertions(+), 24 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 7936b801fe6..12e9eb77ee0 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1920,7 +1920,7 @@ and is between 256 and 4096 characters. It is defined in the file See arch/parisc/kernel/pdc_chassis.c percpu_alloc= [X86] Select which percpu first chunk allocator to use. - Allowed values are one of "lpage", "embed" and "4k". + Allowed values are one of "lpage", "embed" and "page". See comments in arch/x86/kernel/setup_percpu.c for details on each allocator. This parameter is primarily for debugging and performance comparison. diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index a26ff61e2fb..1e17711c29d 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -249,21 +249,22 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen) } /* - * 4k allocator + * Page allocator * - * Boring fallback 4k allocator. This allocator puts more pressure on - * PTE TLBs but other than that behaves nicely on both UMA and NUMA. + * Boring fallback 4k page allocator. This allocator puts more + * pressure on PTE TLBs but other than that behaves nicely on both UMA + * and NUMA. */ -static void __init pcpu4k_populate_pte(unsigned long addr) +static void __init pcpup_populate_pte(unsigned long addr) { populate_extra_pte(addr); } -static ssize_t __init setup_pcpu_4k(size_t static_size) +static ssize_t __init setup_pcpu_page(size_t static_size) { - return pcpu_4k_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, - pcpu_fc_alloc, pcpu_fc_free, - pcpu4k_populate_pte); + return pcpu_page_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, + pcpu_fc_alloc, pcpu_fc_free, + pcpup_populate_pte); } /* for explicit first chunk allocator selection */ @@ -307,7 +308,7 @@ void __init setup_per_cpu_areas(void) */ ret = -EINVAL; if (strlen(pcpu_chosen_alloc)) { - if (strcmp(pcpu_chosen_alloc, "4k")) { + if (strcmp(pcpu_chosen_alloc, "page")) { if (!strcmp(pcpu_chosen_alloc, "lpage")) ret = setup_pcpu_lpage(static_size, true); else if (!strcmp(pcpu_chosen_alloc, "embed")) @@ -317,7 +318,7 @@ void __init setup_per_cpu_areas(void) "specified\n", pcpu_chosen_alloc); if (ret < 0) pr_warning("PERCPU: %s allocator failed (%zd), " - "falling back to 4k\n", + "falling back to page size\n", pcpu_chosen_alloc, ret); } } else { @@ -326,7 +327,7 @@ void __init setup_per_cpu_areas(void) ret = setup_pcpu_embed(static_size, false); } if (ret < 0) - ret = setup_pcpu_4k(static_size); + ret = setup_pcpu_page(static_size); if (ret < 0) panic("cannot allocate static percpu area (%zu bytes, err=%zd)", static_size, ret); diff --git a/include/linux/percpu.h b/include/linux/percpu.h index e134c822963..7989f61b03f 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -74,7 +74,7 @@ extern ssize_t __init pcpu_embed_first_chunk( size_t static_size, size_t reserved_size, ssize_t dyn_size); -extern ssize_t __init pcpu_4k_first_chunk( +extern ssize_t __init pcpu_page_first_chunk( size_t static_size, size_t reserved_size, pcpu_fc_alloc_fn_t alloc_fn, pcpu_fc_free_fn_t free_fn, diff --git a/mm/percpu.c b/mm/percpu.c index cbddcbdab68..6feac793490 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -1497,15 +1497,15 @@ ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size, } /** - * pcpu_4k_first_chunk - map the first chunk using PAGE_SIZE pages + * pcpu_page_first_chunk - map the first chunk using PAGE_SIZE pages * @static_size: the size of static percpu area in bytes * @reserved_size: the size of reserved percpu area in bytes * @alloc_fn: function to allocate percpu page, always called with PAGE_SIZE * @free_fn: funtion to free percpu page, always called with PAGE_SIZE * @populate_pte_fn: function to populate pte * - * This is a helper to ease setting up embedded first percpu chunk and - * can be called where pcpu_setup_first_chunk() is expected. + * This is a helper to ease setting up page-remapped first percpu + * chunk and can be called where pcpu_setup_first_chunk() is expected. * * This is the basic allocator. Static percpu area is allocated * page-by-page into vmalloc area. @@ -1514,12 +1514,13 @@ ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size, * The determined pcpu_unit_size which can be used to initialize * percpu access on success, -errno on failure. */ -ssize_t __init pcpu_4k_first_chunk(size_t static_size, size_t reserved_size, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn, - pcpu_fc_populate_pte_fn_t populate_pte_fn) +ssize_t __init pcpu_page_first_chunk(size_t static_size, size_t reserved_size, + pcpu_fc_alloc_fn_t alloc_fn, + pcpu_fc_free_fn_t free_fn, + pcpu_fc_populate_pte_fn_t populate_pte_fn) { static struct vm_struct vm; + char psize_str[16]; int unit_pages; size_t pages_size; struct page **pages; @@ -1527,6 +1528,8 @@ ssize_t __init pcpu_4k_first_chunk(size_t static_size, size_t reserved_size, int i, j; ssize_t ret; + snprintf(psize_str, sizeof(psize_str), "%luK", PAGE_SIZE >> 10); + unit_pages = PFN_UP(max_t(size_t, static_size + reserved_size, PCPU_MIN_UNIT_SIZE)); @@ -1542,8 +1545,8 @@ ssize_t __init pcpu_4k_first_chunk(size_t static_size, size_t reserved_size, ptr = alloc_fn(cpu, PAGE_SIZE); if (!ptr) { - pr_warning("PERCPU: failed to allocate " - "4k page for cpu%u\n", cpu); + pr_warning("PERCPU: failed to allocate %s page " + "for cpu%u\n", psize_str, cpu); goto enomem; } pages[j++] = virt_to_page(ptr); @@ -1580,8 +1583,8 @@ ssize_t __init pcpu_4k_first_chunk(size_t static_size, size_t reserved_size, } /* we're ready, commit */ - pr_info("PERCPU: %d 4k pages/cpu @%p s%zu r%zu\n", - unit_pages, vm.addr, static_size, reserved_size); + pr_info("PERCPU: %d %s pages/cpu @%p s%zu r%zu\n", + unit_pages, psize_str, vm.addr, static_size, reserved_size); ret = pcpu_setup_first_chunk(static_size, reserved_size, -1, unit_pages << PAGE_SHIFT, vm.addr, NULL); -- cgit v1.2.3-70-g09d2 From f58dc01ba2ca9fe3ab2ba4ca43d9c8a735cf62d8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:50 +0900 Subject: percpu: generalize first chunk allocator selection Now that all first chunk allocators are in mm/percpu.c, it makes sense to make generalize percpu_alloc kernel parameter. Define PCPU_FC_* and set pcpu_chosen_fc using early_param() in mm/percpu.c. Arch code can use the set value to determine which first chunk allocator to use. Signed-off-by: Tejun Heo --- Documentation/kernel-parameters.txt | 11 ++++++----- arch/x86/kernel/setup_percpu.c | 24 ++++++------------------ include/linux/percpu.h | 12 ++++++++++++ mm/percpu.c | 32 ++++++++++++++++++++++++++++++++ 4 files changed, 56 insertions(+), 23 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 12e9eb77ee0..dee9ce2e6cf 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1919,11 +1919,12 @@ and is between 256 and 4096 characters. It is defined in the file Format: { 0 | 1 } See arch/parisc/kernel/pdc_chassis.c - percpu_alloc= [X86] Select which percpu first chunk allocator to use. - Allowed values are one of "lpage", "embed" and "page". - See comments in arch/x86/kernel/setup_percpu.c for - details on each allocator. This parameter is primarily - for debugging and performance comparison. + percpu_alloc= Select which percpu first chunk allocator to use. + Currently supported values are "embed", "page" and + "lpage". Archs may support subset or none of the + selections. See comments in mm/percpu.c for details + on each allocator. This parameter is primarily for + debugging and performance comparison. pf. [PARIDE] See Documentation/blockdev/paride.txt. diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 1e17711c29d..b961d99e641 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -267,16 +267,6 @@ static ssize_t __init setup_pcpu_page(size_t static_size) pcpup_populate_pte); } -/* for explicit first chunk allocator selection */ -static char pcpu_chosen_alloc[16] __initdata; - -static int __init percpu_alloc_setup(char *str) -{ - strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1); - return 0; -} -early_param("percpu_alloc", percpu_alloc_setup); - static inline void setup_percpu_segment(int cpu) { #ifdef CONFIG_X86_32 @@ -307,19 +297,17 @@ void __init setup_per_cpu_areas(void) * each allocator for details. */ ret = -EINVAL; - if (strlen(pcpu_chosen_alloc)) { - if (strcmp(pcpu_chosen_alloc, "page")) { - if (!strcmp(pcpu_chosen_alloc, "lpage")) + if (pcpu_chosen_fc != PCPU_FC_AUTO) { + if (pcpu_chosen_fc != PCPU_FC_PAGE) { + if (pcpu_chosen_fc == PCPU_FC_LPAGE) ret = setup_pcpu_lpage(static_size, true); - else if (!strcmp(pcpu_chosen_alloc, "embed")) - ret = setup_pcpu_embed(static_size, true); else - pr_warning("PERCPU: unknown allocator %s " - "specified\n", pcpu_chosen_alloc); + ret = setup_pcpu_embed(static_size, true); + if (ret < 0) pr_warning("PERCPU: %s allocator failed (%zd), " "falling back to page size\n", - pcpu_chosen_alloc, ret); + pcpu_fc_names[pcpu_chosen_fc], ret); } } else { ret = setup_pcpu_lpage(static_size, false); diff --git a/include/linux/percpu.h b/include/linux/percpu.h index e26788e0da4..9be05cbe5ee 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -59,6 +59,18 @@ extern void *pcpu_base_addr; extern const int *pcpu_unit_map; +enum pcpu_fc { + PCPU_FC_AUTO, + PCPU_FC_EMBED, + PCPU_FC_PAGE, + PCPU_FC_LPAGE, + + PCPU_FC_NR, +}; +extern const char *pcpu_fc_names[PCPU_FC_NR]; + +extern enum pcpu_fc pcpu_chosen_fc; + typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size); typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size); typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr); diff --git a/mm/percpu.c b/mm/percpu.c index 7971997de31..7fb40bb1555 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -1414,6 +1414,38 @@ size_t __init pcpu_setup_first_chunk(size_t static_size, size_t reserved_size, return pcpu_unit_size; } +const char *pcpu_fc_names[PCPU_FC_NR] __initdata = { + [PCPU_FC_AUTO] = "auto", + [PCPU_FC_EMBED] = "embed", + [PCPU_FC_PAGE] = "page", + [PCPU_FC_LPAGE] = "lpage", +}; + +enum pcpu_fc pcpu_chosen_fc __initdata = PCPU_FC_AUTO; + +static int __init percpu_alloc_setup(char *str) +{ + if (0) + /* nada */; +#ifdef CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK + else if (!strcmp(str, "embed")) + pcpu_chosen_fc = PCPU_FC_EMBED; +#endif +#ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK + else if (!strcmp(str, "page")) + pcpu_chosen_fc = PCPU_FC_PAGE; +#endif +#ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK + else if (!strcmp(str, "lpage")) + pcpu_chosen_fc = PCPU_FC_LPAGE; +#endif + else + pr_warning("PERCPU: unknown allocator %s specified\n", str); + + return 0; +} +early_param("percpu_alloc", percpu_alloc_setup); + static inline size_t pcpu_calc_fc_sizes(size_t static_size, size_t reserved_size, ssize_t *dyn_sizep) -- cgit v1.2.3-70-g09d2 From e933a73f48e3b2d40cfa56d81e2646f194b5a66a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:53 +0900 Subject: percpu: kill lpage first chunk allocator With x86 converted to embedding allocator, lpage doesn't have any user left. Kill it along with cpa handling code. Signed-off-by: Tejun Heo Cc: Jan Beulich --- Documentation/kernel-parameters.txt | 10 +- arch/x86/mm/pageattr.c | 20 +-- include/linux/percpu.h | 16 --- mm/percpu.c | 241 ------------------------------------ 4 files changed, 6 insertions(+), 281 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index dee9ce2e6cf..e710093e3d3 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1920,11 +1920,11 @@ and is between 256 and 4096 characters. It is defined in the file See arch/parisc/kernel/pdc_chassis.c percpu_alloc= Select which percpu first chunk allocator to use. - Currently supported values are "embed", "page" and - "lpage". Archs may support subset or none of the - selections. See comments in mm/percpu.c for details - on each allocator. This parameter is primarily for - debugging and performance comparison. + Currently supported values are "embed" and "page". + Archs may support subset or none of the selections. + See comments in mm/percpu.c for details on each + allocator. This parameter is primarily for debugging + and performance comparison. pf. [PARIDE] See Documentation/blockdev/paride.txt. diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index dce282f6570..f53cfc7f963 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -687,7 +687,7 @@ static int cpa_process_alias(struct cpa_data *cpa) { struct cpa_data alias_cpa; unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT); - unsigned long vaddr, remapped; + unsigned long vaddr; int ret; if (cpa->pfn >= max_pfn_mapped) @@ -745,24 +745,6 @@ static int cpa_process_alias(struct cpa_data *cpa) } #endif - /* - * If the PMD page was partially used for per-cpu remapping, - * the recycled area needs to be split and modified. Because - * the area is always proper subset of a PMD page - * cpa->numpages is guaranteed to be 1 for these areas, so - * there's no need to loop over and check for further remaps. - */ - remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr); - if (remapped) { - WARN_ON(cpa->numpages > 1); - alias_cpa = *cpa; - alias_cpa.vaddr = &remapped; - alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY); - ret = __change_page_attr_set_clr(&alias_cpa, 0); - if (ret) - return ret; - } - return 0; } diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 25359932740..878836ca999 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -82,7 +82,6 @@ enum pcpu_fc { PCPU_FC_AUTO, PCPU_FC_EMBED, PCPU_FC_PAGE, - PCPU_FC_LPAGE, PCPU_FC_NR, }; @@ -95,7 +94,6 @@ typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size, typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size); typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr); typedef int (pcpu_fc_cpu_distance_fn_t)(unsigned int from, unsigned int to); -typedef void (*pcpu_fc_map_fn_t)(void *ptr, size_t size, void *addr); extern struct pcpu_alloc_info * __init pcpu_alloc_alloc_info(int nr_groups, int nr_units); @@ -124,20 +122,6 @@ extern int __init pcpu_page_first_chunk(size_t reserved_size, pcpu_fc_populate_pte_fn_t populate_pte_fn); #endif -#ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK -extern int __init pcpu_lpage_first_chunk(const struct pcpu_alloc_info *ai, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn, - pcpu_fc_map_fn_t map_fn); - -extern void *pcpu_lpage_remapped(void *kaddr); -#else -static inline void *pcpu_lpage_remapped(void *kaddr) -{ - return NULL; -} -#endif - /* * Use this to get to a cpu's version of the per-cpu object * dynamically allocated. Non-atomic access to the current CPU's diff --git a/mm/percpu.c b/mm/percpu.c index c2826d05505..77933928107 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -1713,7 +1713,6 @@ const char *pcpu_fc_names[PCPU_FC_NR] __initdata = { [PCPU_FC_AUTO] = "auto", [PCPU_FC_EMBED] = "embed", [PCPU_FC_PAGE] = "page", - [PCPU_FC_LPAGE] = "lpage", }; enum pcpu_fc pcpu_chosen_fc __initdata = PCPU_FC_AUTO; @@ -1729,10 +1728,6 @@ static int __init percpu_alloc_setup(char *str) #ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK else if (!strcmp(str, "page")) pcpu_chosen_fc = PCPU_FC_PAGE; -#endif -#ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK - else if (!strcmp(str, "lpage")) - pcpu_chosen_fc = PCPU_FC_LPAGE; #endif else pr_warning("PERCPU: unknown allocator %s specified\n", str); @@ -1970,242 +1965,6 @@ out_free_ar: } #endif /* CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK */ -#ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK -struct pcpul_ent { - void *ptr; - void *map_addr; -}; - -static size_t pcpul_size; -static size_t pcpul_lpage_size; -static int pcpul_nr_lpages; -static struct pcpul_ent *pcpul_map; - -static bool __init pcpul_unit_to_cpu(int unit, const struct pcpu_alloc_info *ai, - unsigned int *cpup) -{ - int group, cunit; - - for (group = 0, cunit = 0; group < ai->nr_groups; group++) { - const struct pcpu_group_info *gi = &ai->groups[group]; - - if (unit < cunit + gi->nr_units) { - if (cpup) - *cpup = gi->cpu_map[unit - cunit]; - return true; - } - cunit += gi->nr_units; - } - - return false; -} - -static int __init pcpul_cpu_to_unit(int cpu, const struct pcpu_alloc_info *ai) -{ - int group, unit, i; - - for (group = 0, unit = 0; group < ai->nr_groups; group++, unit += i) { - const struct pcpu_group_info *gi = &ai->groups[group]; - - for (i = 0; i < gi->nr_units; i++) - if (gi->cpu_map[i] == cpu) - return unit + i; - } - BUG(); -} - -/** - * pcpu_lpage_first_chunk - remap the first percpu chunk using large page - * @ai: pcpu_alloc_info - * @alloc_fn: function to allocate percpu lpage, always called with lpage_size - * @free_fn: function to free percpu memory, @size <= lpage_size - * @map_fn: function to map percpu lpage, always called with lpage_size - * - * This allocator uses large page to build and map the first chunk. - * Unlike other helpers, the caller should provide fully initialized - * @ai. This can be done using pcpu_build_alloc_info(). This two - * stage initialization is to allow arch code to evaluate the - * parameters before committing to it. - * - * Large pages are allocated as directed by @unit_map and other - * parameters and mapped to vmalloc space. Unused holes are returned - * to the page allocator. Note that these holes end up being actively - * mapped twice - once to the physical mapping and to the vmalloc area - * for the first percpu chunk. Depending on architecture, this might - * cause problem when changing page attributes of the returned area. - * These double mapped areas can be detected using - * pcpu_lpage_remapped(). - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int __init pcpu_lpage_first_chunk(const struct pcpu_alloc_info *ai, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn, - pcpu_fc_map_fn_t map_fn) -{ - static struct vm_struct vm; - const size_t lpage_size = ai->atom_size; - size_t chunk_size, map_size; - unsigned int cpu; - int i, j, unit, nr_units, rc; - - nr_units = 0; - for (i = 0; i < ai->nr_groups; i++) - nr_units += ai->groups[i].nr_units; - - chunk_size = ai->unit_size * nr_units; - BUG_ON(chunk_size % lpage_size); - - pcpul_size = ai->static_size + ai->reserved_size + ai->dyn_size; - pcpul_lpage_size = lpage_size; - pcpul_nr_lpages = chunk_size / lpage_size; - - /* allocate pointer array and alloc large pages */ - map_size = pcpul_nr_lpages * sizeof(pcpul_map[0]); - pcpul_map = alloc_bootmem(map_size); - - /* allocate all pages */ - for (i = 0; i < pcpul_nr_lpages; i++) { - size_t offset = i * lpage_size; - int first_unit = offset / ai->unit_size; - int last_unit = (offset + lpage_size - 1) / ai->unit_size; - void *ptr; - - /* find out which cpu is mapped to this unit */ - for (unit = first_unit; unit <= last_unit; unit++) - if (pcpul_unit_to_cpu(unit, ai, &cpu)) - goto found; - continue; - found: - ptr = alloc_fn(cpu, lpage_size, lpage_size); - if (!ptr) { - pr_warning("PERCPU: failed to allocate large page " - "for cpu%u\n", cpu); - goto enomem; - } - - pcpul_map[i].ptr = ptr; - } - - /* return unused holes */ - for (unit = 0; unit < nr_units; unit++) { - size_t start = unit * ai->unit_size; - size_t end = start + ai->unit_size; - size_t off, next; - - /* don't free used part of occupied unit */ - if (pcpul_unit_to_cpu(unit, ai, NULL)) - start += pcpul_size; - - /* unit can span more than one page, punch the holes */ - for (off = start; off < end; off = next) { - void *ptr = pcpul_map[off / lpage_size].ptr; - next = min(roundup(off + 1, lpage_size), end); - if (ptr) - free_fn(ptr + off % lpage_size, next - off); - } - } - - /* allocate address, map and copy */ - vm.flags = VM_ALLOC; - vm.size = chunk_size; - vm_area_register_early(&vm, ai->unit_size); - - for (i = 0; i < pcpul_nr_lpages; i++) { - if (!pcpul_map[i].ptr) - continue; - pcpul_map[i].map_addr = vm.addr + i * lpage_size; - map_fn(pcpul_map[i].ptr, lpage_size, pcpul_map[i].map_addr); - } - - for_each_possible_cpu(cpu) - memcpy(vm.addr + pcpul_cpu_to_unit(cpu, ai) * ai->unit_size, - __per_cpu_load, ai->static_size); - - /* we're ready, commit */ - pr_info("PERCPU: large pages @%p s%zu r%zu d%zu u%zu\n", - vm.addr, ai->static_size, ai->reserved_size, ai->dyn_size, - ai->unit_size); - - rc = pcpu_setup_first_chunk(ai, vm.addr); - - /* - * Sort pcpul_map array for pcpu_lpage_remapped(). Unmapped - * lpages are pushed to the end and trimmed. - */ - for (i = 0; i < pcpul_nr_lpages - 1; i++) - for (j = i + 1; j < pcpul_nr_lpages; j++) { - struct pcpul_ent tmp; - - if (!pcpul_map[j].ptr) - continue; - if (pcpul_map[i].ptr && - pcpul_map[i].ptr < pcpul_map[j].ptr) - continue; - - tmp = pcpul_map[i]; - pcpul_map[i] = pcpul_map[j]; - pcpul_map[j] = tmp; - } - - while (pcpul_nr_lpages && !pcpul_map[pcpul_nr_lpages - 1].ptr) - pcpul_nr_lpages--; - - return rc; - -enomem: - for (i = 0; i < pcpul_nr_lpages; i++) - if (pcpul_map[i].ptr) - free_fn(pcpul_map[i].ptr, lpage_size); - free_bootmem(__pa(pcpul_map), map_size); - return -ENOMEM; -} - -/** - * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area - * @kaddr: the kernel address in question - * - * Determine whether @kaddr falls in the pcpul recycled area. This is - * used by pageattr to detect VM aliases and break up the pcpu large - * page mapping such that the same physical page is not mapped under - * different attributes. - * - * The recycled area is always at the tail of a partially used large - * page. - * - * RETURNS: - * Address of corresponding remapped pcpu address if match is found; - * otherwise, NULL. - */ -void *pcpu_lpage_remapped(void *kaddr) -{ - unsigned long lpage_mask = pcpul_lpage_size - 1; - void *lpage_addr = (void *)((unsigned long)kaddr & ~lpage_mask); - unsigned long offset = (unsigned long)kaddr & lpage_mask; - int left = 0, right = pcpul_nr_lpages - 1; - int pos; - - /* pcpul in use at all? */ - if (!pcpul_map) - return NULL; - - /* okay, perform binary search */ - while (left <= right) { - pos = (left + right) / 2; - - if (pcpul_map[pos].ptr < lpage_addr) - left = pos + 1; - else if (pcpul_map[pos].ptr > lpage_addr) - right = pos - 1; - else - return pcpul_map[pos].map_addr + offset; - } - - return NULL; -} -#endif /* CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK */ - /* * Generic percpu area setup. * -- cgit v1.2.3-70-g09d2 From 0aa87445842036f88b53db7f377ad8376bd94ab8 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 14 Aug 2009 15:24:46 +0100 Subject: GFS2: Add a document explaining GFS2's uevents This will be essential reading for anybody who wants to understand how GFS2 interacts with the userland gfs_controld, and the details of recovery. Signed-off-by: Steven Whitehouse Signed-off-by: Bob Peterson --- Documentation/filesystems/gfs2-uevents.txt | 100 +++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/filesystems/gfs2-uevents.txt (limited to 'Documentation') diff --git a/Documentation/filesystems/gfs2-uevents.txt b/Documentation/filesystems/gfs2-uevents.txt new file mode 100644 index 00000000000..fd966dc9979 --- /dev/null +++ b/Documentation/filesystems/gfs2-uevents.txt @@ -0,0 +1,100 @@ + uevents and GFS2 + ================== + +During the lifetime of a GFS2 mount, a number of uevents are generated. +This document explains what the events are and what they are used +for (by gfs_controld in gfs2-utils). + +A list of GFS2 uevents +----------------------- + +1. ADD + +The ADD event occurs at mount time. It will always be the first +uevent generated by the newly created filesystem. If the mount +is successful, an ONLINE uevent will follow. If it is not successful +then a REMOVE uevent will follow. + +The ADD uevent has two environment variables: SPECTATOR=[0|1] +and RDONLY=[0|1] that specify the spectator status (a read-only mount +with no journal assigned), and read-only (with journal assigned) status +of the filesystem respectively. + +2. ONLINE + +The ONLINE uevent is generated after a successful mount or remount. It +has the same environment variables as the ADD uevent. The ONLINE +uevent, along with the two environment variables for spectator and +RDONLY are a relatively recent addition (2.6.32-rc+) and will not +be generated by older kernels. + +3. CHANGE + +The CHANGE uevent is used in two places. One is when reporting the +successful mount of the filesystem by the first node (FIRSTMOUNT=Done). +This is used as a signal by gfs_controld that it is then ok for other +nodes in the cluster to mount the filesystem. + +The other CHANGE uevent is used to inform of the completion +of journal recovery for one of the filesystems journals. It has +two environment variables, JID= which specifies the journal id which +has just been recovered, and RECOVERY=[Done|Failed] to indicate the +success (or otherwise) of the operation. These uevents are generated +for every journal recovered, whether it is during the initial mount +process or as the result of gfs_controld requesting a specific journal +recovery via the /sys/fs/gfs2//lock_module/recovery file. + +Because the CHANGE uevent was used (in early versions of gfs_controld) +without checking the environment variables to discover the state, we +cannot add any more functions to it without running the risk of +someone using an older version of the user tools and breaking their +cluster. For this reason the ONLINE uevent was used when adding a new +uevent for a successful mount or remount. + +4. OFFLINE + +The OFFLINE uevent is only generated due to filesystem errors and is used +as part of the "withdraw" mechanism. Currently this doesn't give any +information about what the error is, which is something that needs to +be fixed. + +5. REMOVE + +The REMOVE uevent is generated at the end of an unsuccessful mount +or at the end of a umount of the filesystem. All REMOVE uevents will +have been preceeded by at least an ADD uevent for the same fileystem, +and unlike the other uevents is generated automatically by the kernel's +kobject subsystem. + + +Information common to all GFS2 uevents (uevent environment variables) +---------------------------------------------------------------------- + +1. LOCKTABLE= + +The LOCKTABLE is a string, as supplied on the mount command +line (locktable=) or via fstab. It is used as a filesystem label +as well as providing the information for a lock_dlm mount to be +able to join the cluster. + +2. LOCKPROTO= + +The LOCKPROTO is a string, and its value depends on what is set +on the mount command line, or via fstab. It will be either +lock_nolock or lock_dlm. In the future other lock managers +may be supported. + +3. JOURNALID= + +If a journal is in use by the filesystem (journals are not +assigned for spectator mounts) then this will give the +numeric journal id in all GFS2 uevents. + +4. UUID= + +With recent versions of gfs2-utils, mkfs.gfs2 writes a UUID +into the filesystem superblock. If it exists, this will +be included in every uevent relating to the filesystem. + + + -- cgit v1.2.3-70-g09d2 From a0aea57786fe9c6b62b1a4f28409582520fa494f Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Wed, 19 Aug 2009 18:53:39 +0400 Subject: ieee802154: document the skb->cb usage clearly. Signed-off-by: Dmitry Eremin-Solenikov --- Documentation/networking/ieee802154.txt | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt index 1c0c82c8bc7..23c995e6403 100644 --- a/Documentation/networking/ieee802154.txt +++ b/Documentation/networking/ieee802154.txt @@ -56,8 +56,12 @@ HardMAC See the header include/net/ieee802154_netdev.h. You have to implement Linux net_device, with .type = ARPHRD_IEEE802154. Data is exchanged with socket family -code via plain sk_buffs. The control block of sk_buffs will contain additional -info as described in the struct ieee802154_mac_cb. +code via plain sk_buffs. On skb reception skb->cb must contain additional +info as described in the struct ieee802154_mac_cb. During packet transmission +the skb->cb is used to provide additional data to device's header_ops->create +function. Be aware, that this data can be overriden later (when socket code +submits skb to qdisc), so if you need something from that cb later, you should +store info in the skb->data on your own. To hook the MLME interface you have to populate the ml_priv field of your net_device with a pointer to struct ieee802154_mlme_ops instance. All fields are @@ -73,3 +77,4 @@ We are going to provide intermediate layer implementing IEEE 802.15.4 MAC in software. This is currently WIP. See header include/net/mac802154.h and several drivers in drivers/ieee802154/. + -- cgit v1.2.3-70-g09d2 From e571cbf1a4f8d8b6cfd4898df718dae84c75a8e1 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 19 Aug 2009 18:12:27 -0400 Subject: NFS: Add a dns resolver for use with NFSv4 referrals and migration The NFSv4 and NFSv4.1 protocols both allow for the redirection of a client from one server to another in order to support filesystem migration and replication. For full protocol support, we need to add the ability to convert a DNS host name into an IP address that we can feed to the RPC client. We'll reuse the sunrpc cache, now that it has been converted to work with rpc_pipefs. Signed-off-by: Trond Myklebust --- Documentation/filesystems/nfs.txt | 98 +++++++++++ Documentation/kernel-parameters.txt | 8 + fs/nfs/Makefile | 3 +- fs/nfs/cache_lib.c | 140 +++++++++++++++ fs/nfs/cache_lib.h | 27 +++ fs/nfs/dns_resolve.c | 335 ++++++++++++++++++++++++++++++++++++ fs/nfs/dns_resolve.h | 14 ++ fs/nfs/inode.c | 8 + net/sunrpc/rpc_pipe.c | 7 + 9 files changed, 639 insertions(+), 1 deletion(-) create mode 100644 Documentation/filesystems/nfs.txt create mode 100644 fs/nfs/cache_lib.c create mode 100644 fs/nfs/cache_lib.h create mode 100644 fs/nfs/dns_resolve.c create mode 100644 fs/nfs/dns_resolve.h (limited to 'Documentation') diff --git a/Documentation/filesystems/nfs.txt b/Documentation/filesystems/nfs.txt new file mode 100644 index 00000000000..f50f26ce6cd --- /dev/null +++ b/Documentation/filesystems/nfs.txt @@ -0,0 +1,98 @@ + +The NFS client +============== + +The NFS version 2 protocol was first documented in RFC1094 (March 1989). +Since then two more major releases of NFS have been published, with NFSv3 +being documented in RFC1813 (June 1995), and NFSv4 in RFC3530 (April +2003). + +The Linux NFS client currently supports all the above published versions, +and work is in progress on adding support for minor version 1 of the NFSv4 +protocol. + +The purpose of this document is to provide information on some of the +upcall interfaces that are used in order to provide the NFS client with +some of the information that it requires in order to fully comply with +the NFS spec. + +The DNS resolver +================ + +NFSv4 allows for one server to refer the NFS client to data that has been +migrated onto another server by means of the special "fs_locations" +attribute. See + http://tools.ietf.org/html/rfc3530#section-6 +and + http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00 + +The fs_locations information can take the form of either an ip address and +a path, or a DNS hostname and a path. The latter requires the NFS client to +do a DNS lookup in order to mount the new volume, and hence the need for an +upcall to allow userland to provide this service. + +Assuming that the user has the 'rpc_pipefs' filesystem mounted in the usual +/var/lib/nfs/rpc_pipefs, the upcall consists of the following steps: + + (1) The process checks the dns_resolve cache to see if it contains a + valid entry. If so, it returns that entry and exits. + + (2) If no valid entry exists, the helper script '/sbin/nfs_cache_getent' + (may be changed using the 'nfs.cache_getent' kernel boot parameter) + is run, with two arguments: + - the cache name, "dns_resolve" + - the hostname to resolve + + (3) After looking up the corresponding ip address, the helper script + writes the result into the rpc_pipefs pseudo-file + '/var/lib/nfs/rpc_pipefs/cache/dns_resolve/channel' + in the following (text) format: + + " \n" + + Where is in the usual IPv4 (123.456.78.90) or IPv6 + (ffee:ddcc:bbaa:9988:7766:5544:3322:1100, ffee::1100, ...) format. + is identical to the second argument of the helper + script, and is the 'time to live' of this cache entry (in + units of seconds). + + Note: If is invalid, say the string "0", then a negative + entry is created, which will cause the kernel to treat the hostname + as having no valid DNS translation. + + + + +A basic sample /sbin/nfs_cache_getent +===================================== + +#!/bin/bash +# +ttl=600 +# +cut=/usr/bin/cut +getent=/usr/bin/getent +rpc_pipefs=/var/lib/nfs/rpc_pipefs +# +die() +{ + echo "Usage: $0 cache_name entry_name" + exit 1 +} + +[ $# -lt 2 ] && die +cachename="$1" +cache_path=${rpc_pipefs}/cache/${cachename}/channel + +case "${cachename}" in + dns_resolve) + name="$2" + result="$(${getent} hosts ${name} | ${cut} -f1 -d\ )" + [ -z "${result}" ] && result="0" + ;; + *) + die + ;; +esac +echo "${result} ${name} ${ttl}" >${cache_path} + diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c08813dbfce..ce885375581 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1503,6 +1503,14 @@ and is between 256 and 4096 characters. It is defined in the file [NFS] set the TCP port on which the NFSv4 callback channel should listen. + nfs.cache_getent= + [NFS] sets the pathname to the program which is used + to update the NFS client cache entries. + + nfs.cache_getent_timeout= + [NFS] sets the timeout after which an attempt to + update a cache entry is deemed to have failed. + nfs.idmap_cache_timeout= [NFS] set the maximum lifetime for idmapper cache entries. diff --git a/fs/nfs/Makefile b/fs/nfs/Makefile index 845159814de..da7fda639ea 100644 --- a/fs/nfs/Makefile +++ b/fs/nfs/Makefile @@ -6,7 +6,8 @@ obj-$(CONFIG_NFS_FS) += nfs.o nfs-y := client.o dir.o file.o getroot.o inode.o super.o nfs2xdr.o \ direct.o pagelist.o proc.o read.o symlink.o unlink.o \ - write.o namespace.o mount_clnt.o + write.o namespace.o mount_clnt.o \ + dns_resolve.o cache_lib.o nfs-$(CONFIG_ROOT_NFS) += nfsroot.o nfs-$(CONFIG_NFS_V3) += nfs3proc.o nfs3xdr.o nfs-$(CONFIG_NFS_V3_ACL) += nfs3acl.o diff --git a/fs/nfs/cache_lib.c b/fs/nfs/cache_lib.c new file mode 100644 index 00000000000..b4ffd0146ea --- /dev/null +++ b/fs/nfs/cache_lib.c @@ -0,0 +1,140 @@ +/* + * linux/fs/nfs/cache_lib.c + * + * Helper routines for the NFS client caches + * + * Copyright (c) 2009 Trond Myklebust + */ +#include +#include +#include +#include +#include +#include +#include + +#include "cache_lib.h" + +#define NFS_CACHE_UPCALL_PATHLEN 256 +#define NFS_CACHE_UPCALL_TIMEOUT 15 + +static char nfs_cache_getent_prog[NFS_CACHE_UPCALL_PATHLEN] = + "/sbin/nfs_cache_getent"; +static unsigned long nfs_cache_getent_timeout = NFS_CACHE_UPCALL_TIMEOUT; + +module_param_string(cache_getent, nfs_cache_getent_prog, + sizeof(nfs_cache_getent_prog), 0600); +MODULE_PARM_DESC(cache_getent, "Path to the client cache upcall program"); +module_param_named(cache_getent_timeout, nfs_cache_getent_timeout, ulong, 0600); +MODULE_PARM_DESC(cache_getent_timeout, "Timeout (in seconds) after which " + "the cache upcall is assumed to have failed"); + +int nfs_cache_upcall(struct cache_detail *cd, char *entry_name) +{ + static char *envp[] = { "HOME=/", + "TERM=linux", + "PATH=/sbin:/usr/sbin:/bin:/usr/bin", + NULL + }; + char *argv[] = { + nfs_cache_getent_prog, + cd->name, + entry_name, + NULL + }; + int ret = -EACCES; + + if (nfs_cache_getent_prog[0] == '\0') + goto out; + ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC); + /* + * Disable the upcall mechanism if we're getting an ENOENT or + * EACCES error. The admin can re-enable it on the fly by using + * sysfs to set the 'cache_getent' parameter once the problem + * has been fixed. + */ + if (ret == -ENOENT || ret == -EACCES) + nfs_cache_getent_prog[0] = '\0'; +out: + return ret > 0 ? 0 : ret; +} + +/* + * Deferred request handling + */ +void nfs_cache_defer_req_put(struct nfs_cache_defer_req *dreq) +{ + if (atomic_dec_and_test(&dreq->count)) + kfree(dreq); +} + +static void nfs_dns_cache_revisit(struct cache_deferred_req *d, int toomany) +{ + struct nfs_cache_defer_req *dreq; + + dreq = container_of(d, struct nfs_cache_defer_req, deferred_req); + + complete_all(&dreq->completion); + nfs_cache_defer_req_put(dreq); +} + +static struct cache_deferred_req *nfs_dns_cache_defer(struct cache_req *req) +{ + struct nfs_cache_defer_req *dreq; + + dreq = container_of(req, struct nfs_cache_defer_req, req); + dreq->deferred_req.revisit = nfs_dns_cache_revisit; + atomic_inc(&dreq->count); + + return &dreq->deferred_req; +} + +struct nfs_cache_defer_req *nfs_cache_defer_req_alloc(void) +{ + struct nfs_cache_defer_req *dreq; + + dreq = kzalloc(sizeof(*dreq), GFP_KERNEL); + if (dreq) { + init_completion(&dreq->completion); + atomic_set(&dreq->count, 1); + dreq->req.defer = nfs_dns_cache_defer; + } + return dreq; +} + +int nfs_cache_wait_for_upcall(struct nfs_cache_defer_req *dreq) +{ + if (wait_for_completion_timeout(&dreq->completion, + nfs_cache_getent_timeout * HZ) == 0) + return -ETIMEDOUT; + return 0; +} + +int nfs_cache_register(struct cache_detail *cd) +{ + struct nameidata nd; + struct vfsmount *mnt; + int ret; + + mnt = rpc_get_mount(); + if (IS_ERR(mnt)) + return PTR_ERR(mnt); + ret = vfs_path_lookup(mnt->mnt_root, mnt, "/cache", 0, &nd); + if (ret) + goto err; + ret = sunrpc_cache_register_pipefs(nd.path.dentry, + cd->name, 0600, cd); + path_put(&nd.path); + if (!ret) + return ret; +err: + rpc_put_mount(); + return ret; +} + +void nfs_cache_unregister(struct cache_detail *cd) +{ + sunrpc_cache_unregister_pipefs(cd); + rpc_put_mount(); +} + diff --git a/fs/nfs/cache_lib.h b/fs/nfs/cache_lib.h new file mode 100644 index 00000000000..76f856e284e --- /dev/null +++ b/fs/nfs/cache_lib.h @@ -0,0 +1,27 @@ +/* + * Helper routines for the NFS client caches + * + * Copyright (c) 2009 Trond Myklebust + */ + +#include +#include +#include + +/* + * Deferred request handling + */ +struct nfs_cache_defer_req { + struct cache_req req; + struct cache_deferred_req deferred_req; + struct completion completion; + atomic_t count; +}; + +extern int nfs_cache_upcall(struct cache_detail *cd, char *entry_name); +extern struct nfs_cache_defer_req *nfs_cache_defer_req_alloc(void); +extern void nfs_cache_defer_req_put(struct nfs_cache_defer_req *dreq); +extern int nfs_cache_wait_for_upcall(struct nfs_cache_defer_req *dreq); + +extern int nfs_cache_register(struct cache_detail *cd); +extern void nfs_cache_unregister(struct cache_detail *cd); diff --git a/fs/nfs/dns_resolve.c b/fs/nfs/dns_resolve.c new file mode 100644 index 00000000000..f4d54ba97cc --- /dev/null +++ b/fs/nfs/dns_resolve.c @@ -0,0 +1,335 @@ +/* + * linux/fs/nfs/dns_resolve.c + * + * Copyright (c) 2009 Trond Myklebust + * + * Resolves DNS hostnames into valid ip addresses + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dns_resolve.h" +#include "cache_lib.h" + +#define NFS_DNS_HASHBITS 4 +#define NFS_DNS_HASHTBL_SIZE (1 << NFS_DNS_HASHBITS) + +static struct cache_head *nfs_dns_table[NFS_DNS_HASHTBL_SIZE]; + +struct nfs_dns_ent { + struct cache_head h; + + char *hostname; + size_t namelen; + + struct sockaddr_storage addr; + size_t addrlen; +}; + + +static void nfs_dns_ent_init(struct cache_head *cnew, + struct cache_head *ckey) +{ + struct nfs_dns_ent *new; + struct nfs_dns_ent *key; + + new = container_of(cnew, struct nfs_dns_ent, h); + key = container_of(ckey, struct nfs_dns_ent, h); + + kfree(new->hostname); + new->hostname = kstrndup(key->hostname, key->namelen, GFP_KERNEL); + if (new->hostname) { + new->namelen = key->namelen; + memcpy(&new->addr, &key->addr, key->addrlen); + new->addrlen = key->addrlen; + } else { + new->namelen = 0; + new->addrlen = 0; + } +} + +static void nfs_dns_ent_put(struct kref *ref) +{ + struct nfs_dns_ent *item; + + item = container_of(ref, struct nfs_dns_ent, h.ref); + kfree(item->hostname); + kfree(item); +} + +static struct cache_head *nfs_dns_ent_alloc(void) +{ + struct nfs_dns_ent *item = kmalloc(sizeof(*item), GFP_KERNEL); + + if (item != NULL) { + item->hostname = NULL; + item->namelen = 0; + item->addrlen = 0; + return &item->h; + } + return NULL; +}; + +static unsigned int nfs_dns_hash(const struct nfs_dns_ent *key) +{ + return hash_str(key->hostname, NFS_DNS_HASHBITS); +} + +static void nfs_dns_request(struct cache_detail *cd, + struct cache_head *ch, + char **bpp, int *blen) +{ + struct nfs_dns_ent *key = container_of(ch, struct nfs_dns_ent, h); + + qword_add(bpp, blen, key->hostname); + (*bpp)[-1] = '\n'; +} + +static int nfs_dns_upcall(struct cache_detail *cd, + struct cache_head *ch) +{ + struct nfs_dns_ent *key = container_of(ch, struct nfs_dns_ent, h); + int ret; + + ret = nfs_cache_upcall(cd, key->hostname); + if (ret) + ret = sunrpc_cache_pipe_upcall(cd, ch, nfs_dns_request); + return ret; +} + +static int nfs_dns_match(struct cache_head *ca, + struct cache_head *cb) +{ + struct nfs_dns_ent *a; + struct nfs_dns_ent *b; + + a = container_of(ca, struct nfs_dns_ent, h); + b = container_of(cb, struct nfs_dns_ent, h); + + if (a->namelen == 0 || a->namelen != b->namelen) + return 0; + return memcmp(a->hostname, b->hostname, a->namelen) == 0; +} + +static int nfs_dns_show(struct seq_file *m, struct cache_detail *cd, + struct cache_head *h) +{ + struct nfs_dns_ent *item; + long ttl; + + if (h == NULL) { + seq_puts(m, "# ip address hostname ttl\n"); + return 0; + } + item = container_of(h, struct nfs_dns_ent, h); + ttl = (long)item->h.expiry_time - (long)get_seconds(); + if (ttl < 0) + ttl = 0; + + if (!test_bit(CACHE_NEGATIVE, &h->flags)) { + char buf[INET6_ADDRSTRLEN+IPV6_SCOPE_ID_LEN+1]; + + rpc_ntop((struct sockaddr *)&item->addr, buf, sizeof(buf)); + seq_printf(m, "%15s ", buf); + } else + seq_puts(m, " "); + seq_printf(m, "%15s %ld\n", item->hostname, ttl); + return 0; +} + +struct nfs_dns_ent *nfs_dns_lookup(struct cache_detail *cd, + struct nfs_dns_ent *key) +{ + struct cache_head *ch; + + ch = sunrpc_cache_lookup(cd, + &key->h, + nfs_dns_hash(key)); + if (!ch) + return NULL; + return container_of(ch, struct nfs_dns_ent, h); +} + +struct nfs_dns_ent *nfs_dns_update(struct cache_detail *cd, + struct nfs_dns_ent *new, + struct nfs_dns_ent *key) +{ + struct cache_head *ch; + + ch = sunrpc_cache_update(cd, + &new->h, &key->h, + nfs_dns_hash(key)); + if (!ch) + return NULL; + return container_of(ch, struct nfs_dns_ent, h); +} + +static int nfs_dns_parse(struct cache_detail *cd, char *buf, int buflen) +{ + char buf1[NFS_DNS_HOSTNAME_MAXLEN+1]; + struct nfs_dns_ent key, *item; + unsigned long ttl; + ssize_t len; + int ret = -EINVAL; + + if (buf[buflen-1] != '\n') + goto out; + buf[buflen-1] = '\0'; + + len = qword_get(&buf, buf1, sizeof(buf1)); + if (len <= 0) + goto out; + key.addrlen = rpc_pton(buf1, len, + (struct sockaddr *)&key.addr, + sizeof(key.addr)); + + len = qword_get(&buf, buf1, sizeof(buf1)); + if (len <= 0) + goto out; + + key.hostname = buf1; + key.namelen = len; + memset(&key.h, 0, sizeof(key.h)); + + ttl = get_expiry(&buf); + if (ttl == 0) + goto out; + key.h.expiry_time = ttl + get_seconds(); + + ret = -ENOMEM; + item = nfs_dns_lookup(cd, &key); + if (item == NULL) + goto out; + + if (key.addrlen == 0) + set_bit(CACHE_NEGATIVE, &key.h.flags); + + item = nfs_dns_update(cd, &key, item); + if (item == NULL) + goto out; + + ret = 0; + cache_put(&item->h, cd); +out: + return ret; +} + +static struct cache_detail nfs_dns_resolve = { + .owner = THIS_MODULE, + .hash_size = NFS_DNS_HASHTBL_SIZE, + .hash_table = nfs_dns_table, + .name = "dns_resolve", + .cache_put = nfs_dns_ent_put, + .cache_upcall = nfs_dns_upcall, + .cache_parse = nfs_dns_parse, + .cache_show = nfs_dns_show, + .match = nfs_dns_match, + .init = nfs_dns_ent_init, + .update = nfs_dns_ent_init, + .alloc = nfs_dns_ent_alloc, +}; + +static int do_cache_lookup(struct cache_detail *cd, + struct nfs_dns_ent *key, + struct nfs_dns_ent **item, + struct nfs_cache_defer_req *dreq) +{ + int ret = -ENOMEM; + + *item = nfs_dns_lookup(cd, key); + if (*item) { + ret = cache_check(cd, &(*item)->h, &dreq->req); + if (ret) + *item = NULL; + } + return ret; +} + +static int do_cache_lookup_nowait(struct cache_detail *cd, + struct nfs_dns_ent *key, + struct nfs_dns_ent **item) +{ + int ret = -ENOMEM; + + *item = nfs_dns_lookup(cd, key); + if (!*item) + goto out_err; + ret = -ETIMEDOUT; + if (!test_bit(CACHE_VALID, &(*item)->h.flags) + || (*item)->h.expiry_time < get_seconds() + || cd->flush_time > (*item)->h.last_refresh) + goto out_put; + ret = -ENOENT; + if (test_bit(CACHE_NEGATIVE, &(*item)->h.flags)) + goto out_put; + return 0; +out_put: + cache_put(&(*item)->h, cd); +out_err: + *item = NULL; + return ret; +} + +static int do_cache_lookup_wait(struct cache_detail *cd, + struct nfs_dns_ent *key, + struct nfs_dns_ent **item) +{ + struct nfs_cache_defer_req *dreq; + int ret = -ENOMEM; + + dreq = nfs_cache_defer_req_alloc(); + if (!dreq) + goto out; + ret = do_cache_lookup(cd, key, item, dreq); + if (ret == -EAGAIN) { + ret = nfs_cache_wait_for_upcall(dreq); + if (!ret) + ret = do_cache_lookup_nowait(cd, key, item); + } + nfs_cache_defer_req_put(dreq); +out: + return ret; +} + +ssize_t nfs_dns_resolve_name(char *name, size_t namelen, + struct sockaddr *sa, size_t salen) +{ + struct nfs_dns_ent key = { + .hostname = name, + .namelen = namelen, + }; + struct nfs_dns_ent *item = NULL; + ssize_t ret; + + ret = do_cache_lookup_wait(&nfs_dns_resolve, &key, &item); + if (ret == 0) { + if (salen >= item->addrlen) { + memcpy(sa, &item->addr, item->addrlen); + ret = item->addrlen; + } else + ret = -EOVERFLOW; + cache_put(&item->h, &nfs_dns_resolve); + } else if (ret == -ENOENT) + ret = -ESRCH; + return ret; +} + +int nfs_dns_resolver_init(void) +{ + return nfs_cache_register(&nfs_dns_resolve); +} + +void nfs_dns_resolver_destroy(void) +{ + nfs_cache_unregister(&nfs_dns_resolve); +} + diff --git a/fs/nfs/dns_resolve.h b/fs/nfs/dns_resolve.h new file mode 100644 index 00000000000..a3f0938babf --- /dev/null +++ b/fs/nfs/dns_resolve.h @@ -0,0 +1,14 @@ +/* + * Resolve DNS hostnames into valid ip addresses + */ +#ifndef __LINUX_FS_NFS_DNS_RESOLVE_H +#define __LINUX_FS_NFS_DNS_RESOLVE_H + +#define NFS_DNS_HOSTNAME_MAXLEN (128) + +extern int nfs_dns_resolver_init(void); +extern void nfs_dns_resolver_destroy(void); +extern ssize_t nfs_dns_resolve_name(char *name, size_t namelen, + struct sockaddr *sa, size_t salen); + +#endif diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index fe5a8b45d86..060022b4651 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -46,6 +46,7 @@ #include "iostat.h" #include "internal.h" #include "fscache.h" +#include "dns_resolve.h" #define NFSDBG_FACILITY NFSDBG_VFS @@ -1506,6 +1507,10 @@ static int __init init_nfs_fs(void) { int err; + err = nfs_dns_resolver_init(); + if (err < 0) + goto out8; + err = nfs_fscache_register(); if (err < 0) goto out7; @@ -1564,6 +1569,8 @@ out5: out6: nfs_fscache_unregister(); out7: + nfs_dns_resolver_destroy(); +out8: return err; } @@ -1575,6 +1582,7 @@ static void __exit exit_nfs_fs(void) nfs_destroy_inodecache(); nfs_destroy_nfspagecache(); nfs_fscache_unregister(); + nfs_dns_resolver_destroy(); #ifdef CONFIG_PROC_FS rpc_proc_unregister("nfs"); #endif diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index 3fdacaf5c70..7f676bdf70d 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -416,11 +416,13 @@ struct vfsmount *rpc_get_mount(void) return ERR_PTR(err); return rpc_mount; } +EXPORT_SYMBOL_GPL(rpc_get_mount); void rpc_put_mount(void) { simple_release_fs(&rpc_mount, &rpc_mount_count); } +EXPORT_SYMBOL_GPL(rpc_put_mount); static int rpc_delete_dentry(struct dentry *dentry) { @@ -946,6 +948,7 @@ enum { RPCAUTH_portmap, RPCAUTH_statd, RPCAUTH_nfsd4_cb, + RPCAUTH_cache, RPCAUTH_RootEOF }; @@ -974,6 +977,10 @@ static const struct rpc_filelist files[] = { .name = "nfsd4_cb", .mode = S_IFDIR | S_IRUGO | S_IXUGO, }, + [RPCAUTH_cache] = { + .name = "cache", + .mode = S_IFDIR | S_IRUGO | S_IXUGO, + }, }; static int -- cgit v1.2.3-70-g09d2 From fc69f4a6af49ee69475dc4217924d9edf77760e0 Mon Sep 17 00:00:00 2001 From: Tai-hwa Liang Date: Sun, 10 May 2009 18:15:39 -0700 Subject: Input: add new driver for Sentelic Finger Sensing Pad This is the driver for Sentelic Finger Sensing Pad which can be found on MSI WIND Netbook. Signed-off-by: Tai-hwa Liang Signed-off-by: Dmitry Torokhov --- Documentation/input/sentelic.txt | 475 ++++++++++++++++++++ drivers/input/mouse/Kconfig | 8 + drivers/input/mouse/Makefile | 1 + drivers/input/mouse/psmouse-base.c | 26 +- drivers/input/mouse/psmouse.h | 1 + drivers/input/mouse/sentelic.c | 867 +++++++++++++++++++++++++++++++++++++ drivers/input/mouse/sentelic.h | 98 +++++ drivers/input/serio/libps2.c | 15 +- include/linux/libps2.h | 1 + 9 files changed, 1488 insertions(+), 4 deletions(-) create mode 100644 Documentation/input/sentelic.txt create mode 100644 drivers/input/mouse/sentelic.c create mode 100644 drivers/input/mouse/sentelic.h (limited to 'Documentation') diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt new file mode 100644 index 00000000000..f7160a2fb6a --- /dev/null +++ b/Documentation/input/sentelic.txt @@ -0,0 +1,475 @@ +Copyright (C) 2002-2008 Sentelic Corporation. +Last update: Oct-31-2008 + +============================================================================== +* Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons) +============================================================================== +A) MSID 4: Scrolling wheel mode plus Forward page(4th button) and Backward + page (5th button) +@1. Set sample rate to 200; +@2. Set sample rate to 200; +@3. Set sample rate to 80; +@4. Issuing the "Get device ID" command (0xF2) and waits for the response; +@5. FSP will respond 0x04. + +Packet 1 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|W|W|W|W| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7 => Y overflow + Bit6 => X overflow + Bit5 => Y sign bit + Bit4 => X sign bit + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: X Movement(9-bit 2's complement integers) +Byte 3: Y Movement(9-bit 2's complement integers) +Byte 4: Bit3~Bit0 => the scrolling wheel's movement since the last data report. + valid values, -8 ~ +7 + Bit4 => 1 = 4th mouse button is pressed, Forward one page. + 0 = 4th mouse button is not pressed. + Bit5 => 1 = 5th mouse button is pressed, Backward one page. + 0 = 5th mouse button is not pressed. + +B) MSID 6: Horizontal and Vertical scrolling. +@ Set bit 1 in register 0x40 to 1 + +# FSP replaces scrolling wheel's movement as 4 bits to show horizontal and + vertical scrolling. + +Packet 1 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|l|r|u|d| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7 => Y overflow + Bit6 => X overflow + Bit5 => Y sign bit + Bit4 => X sign bit + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: X Movement(9-bit 2's complement integers) +Byte 3: Y Movement(9-bit 2's complement integers) +Byte 4: Bit0 => the Vertical scrolling movement downward. + Bit1 => the Vertical scrolling movement upward. + Bit2 => the Vertical scrolling movement rightward. + Bit3 => the Vertical scrolling movement leftward. + Bit4 => 1 = 4th mouse button is pressed, Forward one page. + 0 = 4th mouse button is not pressed. + Bit5 => 1 = 5th mouse button is pressed, Backward one page. + 0 = 5th mouse button is not pressed. + +C) MSID 7: +# FSP uses 2 packets(8 Bytes) data to represent Absolute Position + so we have PACKET NUMBER to identify packets. + If PACKET NUMBER is 0, the packet is Packet 1. + If PACKET NUMBER is 1, the packet is Packet 2. + Please count this number in program. + +# MSID6 special packet will be enable at the same time when enable MSID 7. + +============================================================================== +* Absolute position for STL3886-G0. +============================================================================== +@ Set bit 2 or 3 in register 0x40 to 1 +@ Set bit 6 in register 0x40 to 1 + +Packet 1 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|1|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|d|u|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => valid bit + Bit4 => 1 + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: X coordinate (xpos[9:2]) +Byte 3: Y coordinate (ypos[9:2]) +Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => scroll up + Bit5 => scroll down + Bit6 => scroll left + Bit7 => scroll right + +Notify Packet for G0 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|0|1|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |M|M|M|M|M|M|M|M| 4 |0|0|0|0|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => 0 + Bit4 => 1 + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: Message Type => 0x5A (Enable/Disable status packet) + Mode Type => 0xA5 (Normal/Icon mode status) +Byte 3: Message Type => 0x00 (Disabled) + => 0x01 (Enabled) + Mode Type => 0x00 (Normal) + => 0x01 (Icon) +Byte 4: Bit7~Bit0 => Don't Care + +============================================================================== +* Absolute position for STL3888-A0. +============================================================================== +Packet 1 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|A|1|L|0|1| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => arc + Bit3 => 1 + Bit2 => Left Button, 1 is pressed, 0 is released. + Bit1 => 0 + Bit0 => 1 +Byte 2: X coordinate (xpos[9:2]) +Byte 3: Y coordinate (ypos[9:2]) +Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit5~Bit4 => y1_g + Bit7~Bit6 => x1_g + +Packet 2 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|A|1|R|1|0| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => arc + Bit3 => 1 + Bit2 => Right Button, 1 is pressed, 0 is released. + Bit1 => 1 + Bit0 => 0 +Byte 2: X coordinate (xpos[9:2]) +Byte 3: Y coordinate (ypos[9:2]) +Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit5~Bit4 => y2_g + Bit7~Bit6 => x2_g + +Notify Packet for STL3888-A0 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => 1 + Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): + 0: left button is generated by the on-pad command + 1: left button is generated by the external button + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) +Byte 3: Bit7~Bit6 => Don't care + Bit5~Bit4 => Number of fingers + Bit3~Bit1 => Reserved + Bit0 => 1: enter gesture mode; 0: leaving gesture mode +Byte 4: Bit7 => scroll right button + Bit6 => scroll left button + Bit5 => scroll down button + Bit4 => scroll up button + * Note that if gesture and additional button (Bit4~Bit7) + happen at the same time, the button information will not + be sent. + Bit3~Bit0 => Reserved + +Sample sequence of Multi-finger, Multi-coordinate mode: + + notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1, + abs pkt 2, ..., notify packet(valid bit == 0) + +============================================================================== +* FSP Enable/Disable packet +============================================================================== + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|0|0|1|M|R|L| 2 |0|1|0|1|1|0|1|E| 3 | | | | | | | | | 4 | | | | | | | | | + |---------------| |---------------| |---------------| |---------------| + +FSP will send out enable/disable packet when FSP receive PS/2 enable/disable +command. Host will receive the packet which Middle, Right, Left button will +be set. The packet only use byte 0 and byte 1 as a pattern of original packet. +Ignore the other bytes of the packet. + +Byte 1: Bit7 => 0, Y overflow + Bit6 => 0, X overflow + Bit5 => 0, Y sign bit + Bit4 => 0, X sign bit + Bit3 => 1 + Bit2 => 1, Middle Button + Bit1 => 1, Right Button + Bit0 => 1, Left Button +Byte 2: Bit7~1 => (0101101b) + Bit0 => 1 = Enable + 0 = Disable +Byte 3: Don't care +Byte 4: Don't care (MOUSE ID 3, 4) +Byte 5~8: Don't care (Absolute packet) + +============================================================================== +* PS/2 Command Set +============================================================================== + +FSP supports basic PS/2 commanding set and modes, refer to following URL for +details about PS/2 commands: + +http://www.computer-engineering.org/index.php?title=PS/2_Mouse_Interface + +============================================================================== +* Programming Sequence for Determining Packet Parsing Flow +============================================================================== +1. Identify FSP by reading device ID(0x00) and version(0x01) register + +2. Determine number of buttons by reading status2 (0x0b) register + + buttons = reg[0x0b] & 0x30 + + if buttons == 0x30 or buttons == 0x20: + # two/four buttons + Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' + section A for packet parsing detail(ignore byte 4, bit ~ 7) + elif buttons == 0x10: + # 6 buttons + Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' + section B for packet parsing detail + elif buttons == 0x00: + # 6 buttons + Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' + section A for packet parsing detail + +============================================================================== +* Programming Sequence for Register Reading/Writing +============================================================================== + +Register inversion requirement: + + Following values needed to be inverted(the '~' operator in C) before being +sent to FSP: + + 0xe9, 0xee, 0xf2 and 0xff. + +Register swapping requirement: + + Following values needed to have their higher 4 bits and lower 4 bits being +swapped before being sent to FSP: + + 10, 20, 40, 60, 80, 100 and 200. + +Register reading sequence: + + 1. send 0xf3 PS/2 command to FSP; + + 2. send 0x66 PS/2 command to FSP; + + 3. send 0x88 PS/2 command to FSP; + + 4. send 0xf3 PS/2 command to FSP; + + 5. if the register address being to read is not required to be + inverted(refer to the 'Register inversion requirement' section), + goto step 6 + + 5a. send 0x68 PS/2 command to FSP; + + 5b. send the inverted register address to FSP and goto step 8; + + 6. if the register address being to read is not required to be + swapped(refer to the 'Register swapping requirement' section), + goto step 7 + + 6a. send 0xcc PS/2 command to FSP; + + 6b. send the swapped register address to FSP and goto step 8; + + 7. send 0x66 PS/2 command to FSP; + + 7a. send the original register address to FSP and goto step 8; + + 8. send 0xe9(status request) PS/2 command to FSP; + + 9. the response read from FSP should be the requested register value. + +Register writing sequence: + + 1. send 0xf3 PS/2 command to FSP; + + 2. if the register address being to write is not required to be + inverted(refer to the 'Register inversion requirement' section), + goto step 3 + + 2a. send 0x74 PS/2 command to FSP; + + 2b. send the inverted register address to FSP and goto step 5; + + 3. if the register address being to write is not required to be + swapped(refer to the 'Register swapping requirement' section), + goto step 4 + + 3a. send 0x77 PS/2 command to FSP; + + 3b. send the swapped register address to FSP and goto step 5; + + 4. send 0x55 PS/2 command to FSP; + + 4a. send the register address to FSP and goto step 5; + + 5. send 0xf3 PS/2 command to FSP; + + 6. if the register value being to write is not required to be + inverted(refer to the 'Register inversion requirement' section), + goto step 7 + + 6a. send 0x47 PS/2 command to FSP; + + 6b. send the inverted register value to FSP and goto step 9; + + 7. if the register value being to write is not required to be + swapped(refer to the 'Register swapping requirement' section), + goto step 8 + + 7a. send 0x44 PS/2 command to FSP; + + 7b. send the swapped register value to FSP and goto step 9; + + 8. send 0x33 PS/2 command to FSP; + + 8a. send the register value to FSP; + + 9. the register writing sequence is completed. + +============================================================================== +* Register Listing +============================================================================== + +offset width default r/w name +0x00 bit7~bit0 0x01 RO device ID + +0x01 bit7~bit0 0xc0 RW version ID + +0x02 bit7~bit0 0x01 RO vendor ID + +0x03 bit7~bit0 0x01 RO product ID + +0x04 bit3~bit0 0x01 RW revision ID + +0x0b RO test mode status 1 + bit3 1 RO 0: rotate 180 degree, 1: no rotation + + bit5~bit4 RO number of buttons + 11 => 2, lbtn/rbtn + 10 => 4, lbtn/rbtn/scru/scrd + 01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr + 00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn + +0x0f RW register file page control + bit0 0 RW 1 to enable page 1 register files + +0x10 RW system control 1 + bit0 1 RW Reserved, must be 1 + bit1 0 RW Reserved, must be 0 + bit4 1 RW Reserved, must be 0 + bit5 0 RW register clock gating enable + 0: read only, 1: read/write enable + (Note that following registers does not require clock gating being + enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e + 40 41 42 43.) + +0x31 RW on-pad command detection + bit7 0 RW on-pad command left button down tag + enable + 0: disable, 1: enable + +0x34 RW on-pad command control 5 + bit4~bit0 0x05 RW XLO in 0s/4/1, so 03h = 0010.1b = 2.5 + (Note that position unit is in 0.5 scanline) + + bit7 0 RW on-pad tap zone enable + 0: disable, 1: enable + +0x35 RW on-pad command control 6 + bit4~bit0 0x1d RW XHI in 0s/4/1, so 19h = 1100.1b = 12.5 + (Note that position unit is in 0.5 scanline) + +0x36 RW on-pad command control 7 + bit4~bit0 0x04 RW YLO in 0s/4/1, so 03h = 0010.1b = 2.5 + (Note that position unit is in 0.5 scanline) + +0x37 RW on-pad command control 8 + bit4~bit0 0x13 RW YHI in 0s/4/1, so 11h = 1000.1b = 8.5 + (Note that position unit is in 0.5 scanline) + +0x40 RW system control 5 + bit1 0 RW FSP Intellimouse mode enable + 0: disable, 1: enable + + bit2 0 RW movement + abs. coordinate mode enable + 0: disable, 1: enable + (Note that this function has the functionality of bit 1 even when + bit 1 is not set. However, the format is different from that of bit 1. + In addition, when bit 1 and bit 2 are set at the same time, bit 2 will + override bit 1.) + + bit3 0 RW abs. coordinate only mode enable + 0: disable, 1: enable + (Note that this function has the functionality of bit 1 even when + bit 1 is not set. However, the format is different from that of bit 1. + In addition, when bit 1, bit 2 and bit 3 are set at the same time, + bit 3 will override bit 1 and 2.) + + bit5 0 RW auto switch enable + 0: disable, 1: enable + + bit6 0 RW G0 abs. + notify packet format enable + 0: disable, 1: enable + (Note that the absolute/relative coordinate output still depends on + bit 2 and 3. That is, if any of those bit is 1, host will receive + absolute coordinates; otherwise, host only receives packets with + relative coordinate.) + +0x43 RW on-pad control + bit0 0 RW on-pad control enable + 0: disable, 1: enable + (Note that if this bit is cleared, bit 3/5 will be ineffective) + + bit3 0 RW on-pad fix vertical scrolling enable + 0: disable, 1: enable + + bit5 0 RW on-pad fix horizontal scrolling enable + 0: disable, 1: enable diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 90bef5d498f..3feeb3af8ab 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -107,6 +107,14 @@ config MOUSE_PS2_ELANTECH entries. For further information, see . +config MOUSE_PS2_SENTELIC + bool "Sentelic Finger Sensing Pad PS/2 protocol extension" + depends on MOUSE_PS2 + help + Say Y here if you have a laptop (such as MSI WIND Netbook) + with Sentelic Finger Sensing Pad touchpad. + + If unsure, say N. config MOUSE_PS2_TOUCHKIT bool "eGalax TouchKit PS/2 protocol extension" diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index ea58c9a372b..570c84a4a65 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -27,5 +27,6 @@ psmouse-$(CONFIG_MOUSE_PS2_ELANTECH) += elantech.o psmouse-$(CONFIG_MOUSE_PS2_OLPC) += hgpk.o psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) += logips2pp.o psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o +psmouse-$(CONFIG_MOUSE_PS2_SENTELIC) += sentelic.o psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index b407b355dce..df318887ca0 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -30,6 +30,7 @@ #include "trackpoint.h" #include "touchkit_ps2.h" #include "elantech.h" +#include "sentelic.h" #define DRIVER_DESC "PS/2 mouse driver" @@ -666,6 +667,20 @@ static int psmouse_extensions(struct psmouse *psmouse, max_proto = PSMOUSE_IMEX; } +/* + * Try Finger Sensing Pad + */ + if (max_proto > PSMOUSE_IMEX) { + if (fsp_detect(psmouse, set_properties) == 0) { + if (!set_properties || fsp_init(psmouse) == 0) + return PSMOUSE_FSP; +/* + * Init failed, try basic relative protocols + */ + max_proto = PSMOUSE_IMEX; + } + } + if (max_proto > PSMOUSE_IMEX) { if (genius_detect(psmouse, set_properties) == 0) return PSMOUSE_GENPS; @@ -813,7 +828,16 @@ static const struct psmouse_protocol psmouse_protocols[] = { .detect = elantech_detect, .init = elantech_init, }, - #endif +#endif +#ifdef CONFIG_MOUSE_PS2_SENTELIC + { + .type = PSMOUSE_FSP, + .name = "FSPPS/2", + .alias = "fsp", + .detect = fsp_detect, + .init = fsp_init, + }, +#endif { .type = PSMOUSE_CORTRON, .name = "CortronPS/2", diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index e3562daeb2e..cca1744c2a0 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -91,6 +91,7 @@ enum psmouse_type { PSMOUSE_CORTRON, PSMOUSE_HGPK, PSMOUSE_ELANTECH, + PSMOUSE_FSP, PSMOUSE_AUTO /* This one should always be last */ }; diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c new file mode 100644 index 00000000000..97b1e72855a --- /dev/null +++ b/drivers/input/mouse/sentelic.c @@ -0,0 +1,867 @@ +/*- + * Finger Sensing Pad PS/2 mouse driver. + * + * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. + * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "psmouse.h" +#include "sentelic.h" + +/* + * Timeout for FSP PS/2 command only (in milliseconds). + */ +#define FSP_CMD_TIMEOUT 200 +#define FSP_CMD_TIMEOUT2 30 + +/** Driver version. */ +static const char fsp_drv_ver[] = "1.0.0-K"; + +/* + * Make sure that the value being sent to FSP will not conflict with + * possible sample rate values. + */ +static unsigned char fsp_test_swap_cmd(unsigned char reg_val) +{ + switch (reg_val) { + case 10: case 20: case 40: case 60: case 80: case 100: case 200: + /* + * The requested value being sent to FSP matched to possible + * sample rates, swap the given value such that the hardware + * wouldn't get confused. + */ + return (reg_val >> 4) | (reg_val << 4); + default: + return reg_val; /* swap isn't necessary */ + } +} + +/* + * Make sure that the value being sent to FSP will not conflict with certain + * commands. + */ +static unsigned char fsp_test_invert_cmd(unsigned char reg_val) +{ + switch (reg_val) { + case 0xe9: case 0xee: case 0xf2: case 0xff: + /* + * The requested value being sent to FSP matched to certain + * commands, inverse the given value such that the hardware + * wouldn't get confused. + */ + return ~reg_val; + default: + return reg_val; /* inversion isn't necessary */ + } +} + +static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[3]; + unsigned char addr; + int rc = -1; + + /* + * We need to shut off the device and switch it into command + * mode so we don't confuse our protocol handler. We don't need + * to do that for writes because sysfs set helper does this for + * us. + */ + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); + psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + mutex_lock(&ps2dev->cmd_mutex); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + /* should return 0xfe(request for resending) */ + ps2_sendbyte(ps2dev, 0x66, FSP_CMD_TIMEOUT2); + /* should return 0xfc(failed) */ + ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + if ((addr = fsp_test_invert_cmd(reg_addr)) != reg_addr) { + ps2_sendbyte(ps2dev, 0x68, FSP_CMD_TIMEOUT2); + } else if ((addr = fsp_test_swap_cmd(reg_addr)) != reg_addr) { + /* swapping is required */ + ps2_sendbyte(ps2dev, 0xcc, FSP_CMD_TIMEOUT2); + /* expect 0xfe */ + } else { + /* swapping isn't necessary */ + ps2_sendbyte(ps2dev, 0x66, FSP_CMD_TIMEOUT2); + /* expect 0xfe */ + } + /* should return 0xfc(failed) */ + ps2_sendbyte(ps2dev, addr, FSP_CMD_TIMEOUT); + + if (__ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO) < 0) + goto out; + + *reg_val = param[2]; + rc = 0; + + out: + mutex_unlock(&ps2dev->cmd_mutex); + ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); + psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); + dev_dbg(&ps2dev->serio->dev, "READ REG: 0x%02x is 0x%02x (rc = %d)\n", + reg_addr, *reg_val, rc); + return rc; +} + +static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char v; + int rc = -1; + + mutex_lock(&ps2dev->cmd_mutex); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + if ((v = fsp_test_invert_cmd(reg_addr)) != reg_addr) { + /* inversion is required */ + ps2_sendbyte(ps2dev, 0x74, FSP_CMD_TIMEOUT2); + } else { + if ((v = fsp_test_swap_cmd(reg_addr)) != reg_addr) { + /* swapping is required */ + ps2_sendbyte(ps2dev, 0x77, FSP_CMD_TIMEOUT2); + } else { + /* swapping isn't necessary */ + ps2_sendbyte(ps2dev, 0x55, FSP_CMD_TIMEOUT2); + } + } + /* write the register address in correct order */ + ps2_sendbyte(ps2dev, v, FSP_CMD_TIMEOUT2); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + return -1; + + if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) { + /* inversion is required */ + ps2_sendbyte(ps2dev, 0x47, FSP_CMD_TIMEOUT2); + } else if ((v = fsp_test_swap_cmd(reg_val)) != reg_val) { + /* swapping is required */ + ps2_sendbyte(ps2dev, 0x44, FSP_CMD_TIMEOUT2); + } else { + /* swapping isn't necessary */ + ps2_sendbyte(ps2dev, 0x33, FSP_CMD_TIMEOUT2); + } + + /* write the register value in correct order */ + ps2_sendbyte(ps2dev, v, FSP_CMD_TIMEOUT2); + rc = 0; + + out: + mutex_unlock(&ps2dev->cmd_mutex); + dev_dbg(&ps2dev->serio->dev, "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n", + reg_addr, reg_val, rc); + return rc; +} + +/* Enable register clock gating for writing certain registers */ +static int fsp_reg_write_enable(struct psmouse *psmouse, bool enable) +{ + int v, nv; + + if (fsp_reg_read(psmouse, FSP_REG_SYSCTL1, &v) == -1) + return -1; + + if (enable) + nv = v | FSP_BIT_EN_REG_CLK; + else + nv = v & ~FSP_BIT_EN_REG_CLK; + + /* only write if necessary */ + if (nv != v) + if (fsp_reg_write(psmouse, FSP_REG_SYSCTL1, nv) == -1) + return -1; + + return 0; +} + +static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[3]; + int rc = -1; + + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); + psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + mutex_lock(&ps2dev->cmd_mutex); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + ps2_sendbyte(ps2dev, 0x66, FSP_CMD_TIMEOUT2); + ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + ps2_sendbyte(ps2dev, 0x83, FSP_CMD_TIMEOUT2); + ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2); + + /* get the returned result */ + if (__ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) + goto out; + + *reg_val = param[2]; + rc = 0; + + out: + mutex_unlock(&ps2dev->cmd_mutex); + ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); + psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); + dev_dbg(&ps2dev->serio->dev, "READ PAGE REG: 0x%02x (rc = %d)\n", + *reg_val, rc); + return rc; +} + +static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char v; + int rc = -1; + + mutex_lock(&ps2dev->cmd_mutex); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + ps2_sendbyte(ps2dev, 0x38, FSP_CMD_TIMEOUT2); + ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + return -1; + + if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) { + ps2_sendbyte(ps2dev, 0x47, FSP_CMD_TIMEOUT2); + } else if ((v = fsp_test_swap_cmd(reg_val)) != reg_val) { + /* swapping is required */ + ps2_sendbyte(ps2dev, 0x44, FSP_CMD_TIMEOUT2); + } else { + /* swapping isn't necessary */ + ps2_sendbyte(ps2dev, 0x33, FSP_CMD_TIMEOUT2); + } + + ps2_sendbyte(ps2dev, v, FSP_CMD_TIMEOUT2); + rc = 0; + + out: + mutex_unlock(&ps2dev->cmd_mutex); + dev_dbg(&ps2dev->serio->dev, "WRITE PAGE REG: to 0x%02x (rc = %d)\n", + reg_val, rc); + return rc; +} + +static int fsp_get_version(struct psmouse *psmouse, int *version) +{ + if (fsp_reg_read(psmouse, FSP_REG_VERSION, version)) + return -EIO; + + return 0; +} + +static int fsp_get_revision(struct psmouse *psmouse, int *rev) +{ + if (fsp_reg_read(psmouse, FSP_REG_REVISION, rev)) + return -EIO; + + return 0; +} + +static int fsp_get_buttons(struct psmouse *psmouse, int *btn) +{ + static const int buttons[] = { + 0x16, /* Left/Middle/Right/Forward/Backward & Scroll Up/Down */ + 0x06, /* Left/Middle/Right & Scroll Up/Down/Right/Left */ + 0x04, /* Left/Middle/Right & Scroll Up/Down */ + 0x02, /* Left/Middle/Right */ + }; + int val; + + if (fsp_reg_read(psmouse, FSP_REG_TMOD_STATUS1, &val) == -1) + return -EIO; + + *btn = buttons[(val & 0x30) >> 4]; + return 0; +} + +/* Enable on-pad command tag output */ +static int fsp_opc_tag_enable(struct psmouse *psmouse, bool enable) +{ + int v, nv; + int res = 0; + + if (fsp_reg_read(psmouse, FSP_REG_OPC_QDOWN, &v) == -1) { + dev_err(&psmouse->ps2dev.serio->dev, "Unable get OPC state.\n"); + return -EIO; + } + + if (enable) + nv = v | FSP_BIT_EN_OPC_TAG; + else + nv = v & ~FSP_BIT_EN_OPC_TAG; + + /* only write if necessary */ + if (nv != v) { + fsp_reg_write_enable(psmouse, true); + res = fsp_reg_write(psmouse, FSP_REG_OPC_QDOWN, nv); + fsp_reg_write_enable(psmouse, false); + } + + if (res != 0) { + dev_err(&psmouse->ps2dev.serio->dev, + "Unable to enable OPC tag.\n"); + res = -EIO; + } + + return res; +} + +static int fsp_onpad_vscr(struct psmouse *psmouse, bool enable) +{ + struct fsp_data *pad = psmouse->private; + int val; + + if (fsp_reg_read(psmouse, FSP_REG_ONPAD_CTL, &val)) + return -EIO; + + pad->vscroll = enable; + + if (enable) + val |= (FSP_BIT_FIX_VSCR | FSP_BIT_ONPAD_ENABLE); + else + val &= ~FSP_BIT_FIX_VSCR; + + if (fsp_reg_write(psmouse, FSP_REG_ONPAD_CTL, val)) + return -EIO; + + return 0; +} + +static int fsp_onpad_hscr(struct psmouse *psmouse, bool enable) +{ + struct fsp_data *pad = psmouse->private; + int val, v2; + + if (fsp_reg_read(psmouse, FSP_REG_ONPAD_CTL, &val)) + return -EIO; + + if (fsp_reg_read(psmouse, FSP_REG_SYSCTL5, &v2)) + return -EIO; + + pad->hscroll = enable; + + if (enable) { + val |= (FSP_BIT_FIX_HSCR | FSP_BIT_ONPAD_ENABLE); + v2 |= FSP_BIT_EN_MSID6; + } else { + val &= ~FSP_BIT_FIX_HSCR; + v2 &= ~(FSP_BIT_EN_MSID6 | FSP_BIT_EN_MSID7 | FSP_BIT_EN_MSID8); + } + + if (fsp_reg_write(psmouse, FSP_REG_ONPAD_CTL, val)) + return -EIO; + + /* reconfigure horizontal scrolling packet output */ + if (fsp_reg_write(psmouse, FSP_REG_SYSCTL5, v2)) + return -EIO; + + return 0; +} + +/* + * Write device specific initial parameters. + * + * ex: 0xab 0xcd - write oxcd into register 0xab + */ +static ssize_t fsp_attr_set_setreg(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + unsigned long reg, val; + char *rest; + ssize_t retval; + + reg = simple_strtoul(buf, &rest, 16); + if (rest == buf || *rest != ' ' || reg > 0xff) + return -EINVAL; + + if (strict_strtoul(rest + 1, 16, &val) || val > 0xff) + return -EINVAL; + + if (fsp_reg_write_enable(psmouse, true)) + return -EIO; + + retval = fsp_reg_write(psmouse, reg, val) < 0 ? -EIO : count; + + fsp_reg_write_enable(psmouse, false); + + return count; +} + +PSMOUSE_DEFINE_WO_ATTR(setreg, S_IWUSR, NULL, fsp_attr_set_setreg); + +static ssize_t fsp_attr_show_getreg(struct psmouse *psmouse, + void *data, char *buf) +{ + struct fsp_data *pad = psmouse->private; + + return sprintf(buf, "%02x%02x\n", pad->last_reg, pad->last_val); +} + +/* + * Read a register from device. + * + * ex: 0xab -- read content from register 0xab + */ +static ssize_t fsp_attr_set_getreg(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + struct fsp_data *pad = psmouse->private; + unsigned long reg; + int val; + + if (strict_strtoul(buf, 16, ®) || reg > 0xff) + return -EINVAL; + + if (fsp_reg_read(psmouse, reg, &val)) + return -EIO; + + pad->last_reg = reg; + pad->last_val = val; + + return count; +} + +PSMOUSE_DEFINE_ATTR(getreg, S_IWUSR | S_IRUGO, NULL, + fsp_attr_show_getreg, fsp_attr_set_getreg); + +static ssize_t fsp_attr_show_pagereg(struct psmouse *psmouse, + void *data, char *buf) +{ + int val = 0; + + if (fsp_page_reg_read(psmouse, &val)) + return -EIO; + + return sprintf(buf, "%02x\n", val); +} + +static ssize_t fsp_attr_set_pagereg(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + unsigned long val; + + if (strict_strtoul(buf, 16, &val) || val > 0xff) + return -EINVAL; + + if (fsp_page_reg_write(psmouse, val)) + return -EIO; + + return count; +} + +PSMOUSE_DEFINE_ATTR(page, S_IWUSR | S_IRUGO, NULL, + fsp_attr_show_pagereg, fsp_attr_set_pagereg); + +static ssize_t fsp_attr_show_vscroll(struct psmouse *psmouse, + void *data, char *buf) +{ + struct fsp_data *pad = psmouse->private; + + return sprintf(buf, "%d\n", pad->vscroll); +} + +static ssize_t fsp_attr_set_vscroll(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + unsigned long val; + + if (strict_strtoul(buf, 10, &val) || val > 1) + return -EINVAL; + + fsp_onpad_vscr(psmouse, val); + + return count; +} + +PSMOUSE_DEFINE_ATTR(vscroll, S_IWUSR | S_IRUGO, NULL, + fsp_attr_show_vscroll, fsp_attr_set_vscroll); + +static ssize_t fsp_attr_show_hscroll(struct psmouse *psmouse, + void *data, char *buf) +{ + struct fsp_data *pad = psmouse->private; + + return sprintf(buf, "%d\n", pad->hscroll); +} + +static ssize_t fsp_attr_set_hscroll(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + unsigned long val; + + if (strict_strtoul(buf, 10, &val) || val > 1) + return -EINVAL; + + fsp_onpad_hscr(psmouse, val); + + return count; +} + +PSMOUSE_DEFINE_ATTR(hscroll, S_IWUSR | S_IRUGO, NULL, + fsp_attr_show_hscroll, fsp_attr_set_hscroll); + +static ssize_t fsp_attr_show_flags(struct psmouse *psmouse, + void *data, char *buf) +{ + struct fsp_data *pad = psmouse->private; + + return sprintf(buf, "%c\n", + pad->flags & FSPDRV_FLAG_EN_OPC ? 'C' : 'c'); +} + +static ssize_t fsp_attr_set_flags(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + struct fsp_data *pad = psmouse->private; + size_t i; + + for (i = 0; i < count; i++) { + switch (buf[i]) { + case 'C': + pad->flags |= FSPDRV_FLAG_EN_OPC; + break; + case 'c': + pad->flags &= ~FSPDRV_FLAG_EN_OPC; + break; + default: + return -EINVAL; + } + } + return count; +} + +PSMOUSE_DEFINE_ATTR(flags, S_IWUSR | S_IRUGO, NULL, + fsp_attr_show_flags, fsp_attr_set_flags); + +static ssize_t fsp_attr_show_ver(struct psmouse *psmouse, + void *data, char *buf) +{ + return sprintf(buf, "Sentelic FSP kernel module %s\n", fsp_drv_ver); +} + +PSMOUSE_DEFINE_RO_ATTR(ver, S_IRUGO, NULL, fsp_attr_show_ver); + +static struct attribute *fsp_attributes[] = { + &psmouse_attr_setreg.dattr.attr, + &psmouse_attr_getreg.dattr.attr, + &psmouse_attr_page.dattr.attr, + &psmouse_attr_vscroll.dattr.attr, + &psmouse_attr_hscroll.dattr.attr, + &psmouse_attr_flags.dattr.attr, + &psmouse_attr_ver.dattr.attr, + NULL +}; + +static struct attribute_group fsp_attribute_group = { + .attrs = fsp_attributes, +}; + +#ifdef FSP_DEBUG +static void fsp_packet_debug(unsigned char packet[]) +{ + static unsigned int ps2_packet_cnt; + static unsigned int ps2_last_second; + unsigned int jiffies_msec; + + ps2_packet_cnt++; + jiffies_msec = jiffies_to_msecs(jiffies); + printk(KERN_DEBUG "%08dms PS/2 packets: %02x, %02x, %02x, %02x\n", + jiffies_msec, packet[0], packet[1], packet[2], packet[3]); + + if (jiffies_msec - ps2_last_second > 1000) { + printk(KERN_DEBUG "PS/2 packets/sec = %d\n", ps2_packet_cnt); + ps2_packet_cnt = 0; + ps2_last_second = jiffies_msec; + } +} +#else +static void fsp_packet_debug(unsigned char packet[]) +{ +} +#endif + +static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct fsp_data *ad = psmouse->private; + unsigned char *packet = psmouse->packet; + unsigned char button_status = 0, lscroll = 0, rscroll = 0; + int rel_x, rel_y; + + if (psmouse->pktcnt < 4) + return PSMOUSE_GOOD_DATA; + + /* + * Full packet accumulated, process it + */ + + switch (psmouse->packet[0] >> FSP_PKT_TYPE_SHIFT) { + case FSP_PKT_TYPE_ABS: + dev_warn(&psmouse->ps2dev.serio->dev, + "Unexpected absolute mode packet, ignored.\n"); + break; + + case FSP_PKT_TYPE_NORMAL_OPC: + /* on-pad click, filter it if necessary */ + if ((ad->flags & FSPDRV_FLAG_EN_OPC) != FSPDRV_FLAG_EN_OPC) + packet[0] &= ~BIT(0); + /* fall through */ + + case FSP_PKT_TYPE_NORMAL: + /* normal packet */ + /* special packet data translation from on-pad packets */ + if (packet[3] != 0) { + if (packet[3] & BIT(0)) + button_status |= 0x01; /* wheel down */ + if (packet[3] & BIT(1)) + button_status |= 0x0f; /* wheel up */ + if (packet[3] & BIT(2)) + button_status |= BIT(5);/* horizontal left */ + if (packet[3] & BIT(3)) + button_status |= BIT(4);/* horizontal right */ + /* push back to packet queue */ + if (button_status != 0) + packet[3] = button_status; + rscroll = (packet[3] >> 4) & 1; + lscroll = (packet[3] >> 5) & 1; + } + /* + * Processing wheel up/down and extra button events + */ + input_report_rel(dev, REL_WHEEL, + (int)(packet[3] & 8) - (int)(packet[3] & 7)); + input_report_rel(dev, REL_HWHEEL, lscroll - rscroll); + input_report_key(dev, BTN_BACK, lscroll); + input_report_key(dev, BTN_FORWARD, rscroll); + + /* + * Standard PS/2 Mouse + */ + input_report_key(dev, BTN_LEFT, packet[0] & 1); + input_report_key(dev, BTN_MIDDLE, (packet[0] >> 2) & 1); + input_report_key(dev, BTN_RIGHT, (packet[0] >> 1) & 1); + + rel_x = packet[1] ? (int)packet[1] - (int)((packet[0] << 4) & 0x100) : 0; + rel_y = packet[2] ? (int)((packet[0] << 3) & 0x100) - (int)packet[2] : 0; + + input_report_rel(dev, REL_X, rel_x); + input_report_rel(dev, REL_Y, rel_y); + break; + } + + input_sync(dev); + + fsp_packet_debug(packet); + + return PSMOUSE_FULL_PACKET; +} + +static int fsp_activate_protocol(struct psmouse *psmouse) +{ + struct fsp_data *pad = psmouse->private; + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[2]; + int val; + + /* + * Standard procedure to enter FSP Intellimouse mode + * (scrolling wheel, 4th and 5th buttons) + */ + param[0] = 200; + ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); + param[0] = 200; + ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); + param[0] = 80; + ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); + + ps2_command(ps2dev, param, PSMOUSE_CMD_GETID); + if (param[0] != 0x04) { + dev_err(&psmouse->ps2dev.serio->dev, + "Unable to enable 4 bytes packet format.\n"); + return -EIO; + } + + if (fsp_reg_read(psmouse, FSP_REG_SYSCTL5, &val)) { + dev_err(&psmouse->ps2dev.serio->dev, + "Unable to read SYSCTL5 register.\n"); + return -EIO; + } + + val &= ~(FSP_BIT_EN_MSID7 | FSP_BIT_EN_MSID8 | FSP_BIT_EN_AUTO_MSID8); + /* Ensure we are not in absolute mode */ + val &= ~FSP_BIT_EN_PKT_G0; + if (pad->buttons == 0x06) { + /* Left/Middle/Right & Scroll Up/Down/Right/Left */ + val |= FSP_BIT_EN_MSID6; + } + + if (fsp_reg_write(psmouse, FSP_REG_SYSCTL5, val)) { + dev_err(&psmouse->ps2dev.serio->dev, + "Unable to set up required mode bits.\n"); + return -EIO; + } + + /* + * Enable OPC tags such that driver can tell the difference between + * on-pad and real button click + */ + if (fsp_opc_tag_enable(psmouse, true)) + dev_warn(&psmouse->ps2dev.serio->dev, + "Failed to enable OPC tag mode.\n"); + + /* Enable on-pad vertical and horizontal scrolling */ + fsp_onpad_vscr(psmouse, true); + fsp_onpad_hscr(psmouse, true); + + return 0; +} + +int fsp_detect(struct psmouse *psmouse, int set_properties) +{ + int id; + + if (fsp_reg_read(psmouse, FSP_REG_DEVICE_ID, &id)) + return -EIO; + + if (id != 0x01) + return -ENODEV; + + if (set_properties) { + psmouse->vendor = "Sentelic"; + psmouse->name = "FingerSensingPad"; + } + + return 0; +} + +static void fsp_reset(struct psmouse *psmouse) +{ + fsp_opc_tag_enable(psmouse, false); + fsp_onpad_vscr(psmouse, false); + fsp_onpad_hscr(psmouse, false); +} + +static void fsp_disconnect(struct psmouse *psmouse) +{ + sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj, + &fsp_attribute_group); + + fsp_reset(psmouse); + kfree(psmouse->private); +} + +static int fsp_reconnect(struct psmouse *psmouse) +{ + int version; + + if (fsp_detect(psmouse, 0)) + return -ENODEV; + + if (fsp_get_version(psmouse, &version)) + return -ENODEV; + + if (fsp_activate_protocol(psmouse)) + return -EIO; + + return 0; +} + +int fsp_init(struct psmouse *psmouse) +{ + struct fsp_data *priv; + int ver, rev, buttons; + int error; + + if (fsp_get_version(psmouse, &ver) || + fsp_get_revision(psmouse, &rev) || + fsp_get_buttons(psmouse, &buttons)) { + return -ENODEV; + } + + printk(KERN_INFO + "Finger Sensing Pad, hw: %d.%d.%d, sw: %s, buttons: %d\n", + ver >> 4, ver & 0x0F, rev, fsp_drv_ver, buttons & 7); + + psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->ver = ver; + priv->rev = rev; + priv->buttons = buttons; + + /* enable on-pad click by default */ + priv->flags |= FSPDRV_FLAG_EN_OPC; + + /* Set up various supported input event bits */ + __set_bit(BTN_BACK, psmouse->dev->keybit); + __set_bit(BTN_FORWARD, psmouse->dev->keybit); + __set_bit(REL_WHEEL, psmouse->dev->relbit); + __set_bit(REL_HWHEEL, psmouse->dev->relbit); + + psmouse->protocol_handler = fsp_process_byte; + psmouse->disconnect = fsp_disconnect; + psmouse->reconnect = fsp_reconnect; + psmouse->cleanup = fsp_reset; + psmouse->pktsize = 4; + + /* set default packet output based on number of buttons we found */ + error = fsp_activate_protocol(psmouse); + if (error) + goto err_out; + + error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj, + &fsp_attribute_group); + if (error) { + dev_err(&psmouse->ps2dev.serio->dev, + "Failed to create sysfs attributes (%d)", error); + goto err_out; + } + + return 0; + + err_out: + kfree(psmouse->private); + psmouse->private = NULL; + return error; +} diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h new file mode 100644 index 00000000000..083559c7282 --- /dev/null +++ b/drivers/input/mouse/sentelic.h @@ -0,0 +1,98 @@ +/*- + * Finger Sensing Pad PS/2 mouse driver. + * + * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. + * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __SENTELIC_H +#define __SENTELIC_H + +/* Finger-sensing Pad information registers */ +#define FSP_REG_DEVICE_ID 0x00 +#define FSP_REG_VERSION 0x01 +#define FSP_REG_REVISION 0x04 +#define FSP_REG_TMOD_STATUS1 0x0B +#define FSP_BIT_NO_ROTATION BIT(3) +#define FSP_REG_PAGE_CTRL 0x0F + +/* Finger-sensing Pad control registers */ +#define FSP_REG_SYSCTL1 0x10 +#define FSP_BIT_EN_REG_CLK BIT(5) +#define FSP_REG_OPC_QDOWN 0x31 +#define FSP_BIT_EN_OPC_TAG BIT(7) +#define FSP_REG_OPTZ_XLO 0x34 +#define FSP_REG_OPTZ_XHI 0x35 +#define FSP_REG_OPTZ_YLO 0x36 +#define FSP_REG_OPTZ_YHI 0x37 +#define FSP_REG_SYSCTL5 0x40 +#define FSP_BIT_90_DEGREE BIT(0) +#define FSP_BIT_EN_MSID6 BIT(1) +#define FSP_BIT_EN_MSID7 BIT(2) +#define FSP_BIT_EN_MSID8 BIT(3) +#define FSP_BIT_EN_AUTO_MSID8 BIT(5) +#define FSP_BIT_EN_PKT_G0 BIT(6) + +#define FSP_REG_ONPAD_CTL 0x43 +#define FSP_BIT_ONPAD_ENABLE BIT(0) +#define FSP_BIT_ONPAD_FBBB BIT(1) +#define FSP_BIT_FIX_VSCR BIT(3) +#define FSP_BIT_FIX_HSCR BIT(5) +#define FSP_BIT_DRAG_LOCK BIT(6) + +/* Finger-sensing Pad packet formating related definitions */ + +/* absolute packet type */ +#define FSP_PKT_TYPE_NORMAL (0x00) +#define FSP_PKT_TYPE_ABS (0x01) +#define FSP_PKT_TYPE_NOTIFY (0x02) +#define FSP_PKT_TYPE_NORMAL_OPC (0x03) +#define FSP_PKT_TYPE_SHIFT (6) + +#ifdef __KERNEL__ + +struct fsp_data { + unsigned char ver; /* hardware version */ + unsigned char rev; /* hardware revison */ + unsigned char buttons; /* Number of buttons */ + unsigned int flags; +#define FSPDRV_FLAG_EN_OPC (0x001) /* enable on-pad clicking */ + + bool vscroll; /* Vertical scroll zone enabled */ + bool hscroll; /* Horizontal scroll zone enabled */ + + unsigned char last_reg; /* Last register we requested read from */ + unsigned char last_val; +}; + +#ifdef CONFIG_MOUSE_PS2_SENTELIC +extern int fsp_detect(struct psmouse *psmouse, int set_properties); +extern int fsp_init(struct psmouse *psmouse); +#else +inline int fsp_detect(struct psmouse *psmouse, int set_properties) +{ + return -ENOSYS; +} +inline int fsp_init(struct psmouse *psmouse) +{ + return -ENOSYS; +} +#endif + +#endif /* __KERNEL__ */ + +#endif /* !__SENTELIC_H */ diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index be5bbbb8ae4..3a95b508bf2 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -161,7 +161,7 @@ static int ps2_adjust_timeout(struct ps2dev *ps2dev, int command, int timeout) * ps2_command() can only be called from a process context */ -int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) +int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) { int timeout; int send = (command >> 12) & 0xf; @@ -179,8 +179,6 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) return -1; } - mutex_lock(&ps2dev->cmd_mutex); - serio_pause_rx(ps2dev->serio); ps2dev->flags = command == PS2_CMD_GETID ? PS2_FLAG_WAITID : 0; ps2dev->cmdcnt = receive; @@ -231,7 +229,18 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) ps2dev->flags = 0; serio_continue_rx(ps2dev->serio); + return rc; +} +EXPORT_SYMBOL(__ps2_command); + +int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) +{ + int rc; + + mutex_lock(&ps2dev->cmd_mutex); + rc = __ps2_command(ps2dev, param, command); mutex_unlock(&ps2dev->cmd_mutex); + return rc; } EXPORT_SYMBOL(ps2_command); diff --git a/include/linux/libps2.h b/include/linux/libps2.h index b94534b7e26..fcf5fbe6a50 100644 --- a/include/linux/libps2.h +++ b/include/linux/libps2.h @@ -44,6 +44,7 @@ struct ps2dev { void ps2_init(struct ps2dev *ps2dev, struct serio *serio); int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout); void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout); +int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data); int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data); -- cgit v1.2.3-70-g09d2 From 196be0cd018068d545e1d764094c7b07aaf0bcfe Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Tue, 2 Jun 2009 14:29:38 -0700 Subject: Bluetooth: Add documentation for Marvell Bluetooth driver add btmrvl.txt to Documentation/ This patch incorporates a lot of comments given by Nicolas Pitre . Many thanks to Nicolas Pitre. Signed-off-by: Rahul Tank Signed-off-by: Bing Zhao Signed-off-by: Marcel Holtmann --- Documentation/00-INDEX | 2 + Documentation/btmrvl.txt | 119 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 121 insertions(+) create mode 100644 Documentation/btmrvl.txt (limited to 'Documentation') diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index d05737aaa84..06b982affe7 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -82,6 +82,8 @@ block/ - info on the Block I/O (BIO) layer. blockdev/ - info on block devices & drivers +btmrvl.txt + - info on Marvell Bluetooth driver usage. cachetlb.txt - describes the cache/TLB flushing interfaces Linux uses. cdrom/ diff --git a/Documentation/btmrvl.txt b/Documentation/btmrvl.txt new file mode 100644 index 00000000000..34916a46c09 --- /dev/null +++ b/Documentation/btmrvl.txt @@ -0,0 +1,119 @@ +======================================================================= + README for btmrvl driver +======================================================================= + + +All commands are used via debugfs interface. + +===================== +Set/get driver configurations: + +Path: /debug/btmrvl/config/ + +gpiogap=[n] +hscfgcmd + These commands are used to configure the host sleep parameters. + bit 8:0 -- Gap + bit 16:8 -- GPIO + + where GPIO is the pin number of GPIO used to wake up the host. + It could be any valid GPIO pin# (e.g. 0-7) or 0xff (SDIO interface + wakeup will be used instead). + + where Gap is the gap in milli seconds between wakeup signal and + wakeup event, or 0xff for special host sleep setting. + + Usage: + # Use SDIO interface to wake up the host and set GAP to 0x80: + echo 0xff80 > /debug/btmrvl/config/gpiogap + echo 1 > /debug/btmrvl/config/hscfgcmd + + # Use GPIO pin #3 to wake up the host and set GAP to 0xff: + echo 0x03ff > /debug/btmrvl/config/gpiogap + echo 1 > /debug/btmrvl/config/hscfgcmd + +psmode=[n] +pscmd + These commands are used to enable/disable auto sleep mode + + where the option is: + 1 -- Enable auto sleep mode + 0 -- Disable auto sleep mode + + Usage: + # Enable auto sleep mode + echo 1 > /debug/btmrvl/config/psmode + echo 1 > /debug/btmrvl/config/pscmd + + # Disable auto sleep mode + echo 0 > /debug/btmrvl/config/psmode + echo 1 > /debug/btmrvl/config/pscmd + + +hsmode=[n] +hscmd + These commands are used to enable host sleep or wake up firmware + + where the option is: + 1 -- Enable host sleep + 0 -- Wake up firmware + + Usage: + # Enable host sleep + echo 1 > /debug/btmrvl/config/hsmode + echo 1 > /debug/btmrvl/config/hscmd + + # Wake up firmware + echo 0 > /debug/btmrvl/config/hsmode + echo 1 > /debug/btmrvl/config/hscmd + + +====================== +Get driver status: + +Path: /debug/btmrvl/status/ + +Usage: + cat /debug/btmrvl/status/ + +where the args are: + +curpsmode + This command displays current auto sleep status. + +psstate + This command display the power save state. + +hsstate + This command display the host sleep state. + +txdnldrdy + This command displays the value of Tx download ready flag. + + +===================== + +Use hcitool to issue raw hci command, refer to hcitool manual + + Usage: Hcitool cmd [Parameters] + + Interface Control Command + hcitool cmd 0x3f 0x5b 0xf5 0x01 0x00 --Enable All interface + hcitool cmd 0x3f 0x5b 0xf5 0x01 0x01 --Enable Wlan interface + hcitool cmd 0x3f 0x5b 0xf5 0x01 0x02 --Enable BT interface + hcitool cmd 0x3f 0x5b 0xf5 0x00 0x00 --Disable All interface + hcitool cmd 0x3f 0x5b 0xf5 0x00 0x01 --Disable Wlan interface + hcitool cmd 0x3f 0x5b 0xf5 0x00 0x02 --Disable BT interface + +======================================================================= + + +SD8688 firmware: + +/lib/firmware/sd8688_helper.bin +/lib/firmware/sd8688.bin + + +The images can be downloaded from: + +git.infradead.org/users/dwmw2/linux-firmware.git/libertas/ -- cgit v1.2.3-70-g09d2 From 5e928f77a09a07f9dd595bb8a489965d69a83458 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 18 Aug 2009 23:38:32 +0200 Subject: PM: Introduce core framework for run-time PM of I/O devices (rev. 17) Introduce a core framework for run-time power management of I/O devices. Add device run-time PM fields to 'struct dev_pm_info' and device run-time PM callbacks to 'struct dev_pm_ops'. Introduce a run-time PM workqueue and define some device run-time PM helper functions at the core level. Document all these things. Special thanks to Alan Stern for his help with the design and multiple detailed reviews of the pereceding versions of this patch and to Magnus Damm for testing feedback. Signed-off-by: Rafael J. Wysocki Acked-by: Magnus Damm --- Documentation/power/runtime_pm.txt | 378 ++++++++++++++ drivers/base/dd.c | 11 + drivers/base/power/Makefile | 1 + drivers/base/power/main.c | 22 +- drivers/base/power/power.h | 31 +- drivers/base/power/runtime.c | 1011 ++++++++++++++++++++++++++++++++++++ include/linux/pm.h | 101 +++- include/linux/pm_runtime.h | 114 ++++ kernel/power/Kconfig | 14 + kernel/power/main.c | 17 + 10 files changed, 1689 insertions(+), 11 deletions(-) create mode 100644 Documentation/power/runtime_pm.txt create mode 100644 drivers/base/power/runtime.c create mode 100644 include/linux/pm_runtime.h (limited to 'Documentation') diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt new file mode 100644 index 00000000000..f49a33b704d --- /dev/null +++ b/Documentation/power/runtime_pm.txt @@ -0,0 +1,378 @@ +Run-time Power Management Framework for I/O Devices + +(C) 2009 Rafael J. Wysocki , Novell Inc. + +1. Introduction + +Support for run-time power management (run-time PM) of I/O devices is provided +at the power management core (PM core) level by means of: + +* The power management workqueue pm_wq in which bus types and device drivers can + put their PM-related work items. It is strongly recommended that pm_wq be + used for queuing all work items related to run-time PM, because this allows + them to be synchronized with system-wide power transitions (suspend to RAM, + hibernation and resume from system sleep states). pm_wq is declared in + include/linux/pm_runtime.h and defined in kernel/power/main.c. + +* A number of run-time PM fields in the 'power' member of 'struct device' (which + is of the type 'struct dev_pm_info', defined in include/linux/pm.h) that can + be used for synchronizing run-time PM operations with one another. + +* Three device run-time PM callbacks in 'struct dev_pm_ops' (defined in + include/linux/pm.h). + +* A set of helper functions defined in drivers/base/power/runtime.c that can be + used for carrying out run-time PM operations in such a way that the + synchronization between them is taken care of by the PM core. Bus types and + device drivers are encouraged to use these functions. + +The run-time PM callbacks present in 'struct dev_pm_ops', the device run-time PM +fields of 'struct dev_pm_info' and the core helper functions provided for +run-time PM are described below. + +2. Device Run-time PM Callbacks + +There are three device run-time PM callbacks defined in 'struct dev_pm_ops': + +struct dev_pm_ops { + ... + int (*runtime_suspend)(struct device *dev); + int (*runtime_resume)(struct device *dev); + void (*runtime_idle)(struct device *dev); + ... +}; + +The ->runtime_suspend() callback is executed by the PM core for the bus type of +the device being suspended. The bus type's callback is then _entirely_ +_responsible_ for handling the device as appropriate, which may, but need not +include executing the device driver's own ->runtime_suspend() callback (from the +PM core's point of view it is not necessary to implement a ->runtime_suspend() +callback in a device driver as long as the bus type's ->runtime_suspend() knows +what to do to handle the device). + + * Once the bus type's ->runtime_suspend() callback has completed successfully + for given device, the PM core regards the device as suspended, which need + not mean that the device has been put into a low power state. It is + supposed to mean, however, that the device will not process data and will + not communicate with the CPU(s) and RAM until its bus type's + ->runtime_resume() callback is executed for it. The run-time PM status of + a device after successful execution of its bus type's ->runtime_suspend() + callback is 'suspended'. + + * If the bus type's ->runtime_suspend() callback returns -EBUSY or -EAGAIN, + the device's run-time PM status is supposed to be 'active', which means that + the device _must_ be fully operational afterwards. + + * If the bus type's ->runtime_suspend() callback returns an error code + different from -EBUSY or -EAGAIN, the PM core regards this as a fatal + error and will refuse to run the helper functions described in Section 4 + for the device, until the status of it is directly set either to 'active' + or to 'suspended' (the PM core provides special helper functions for this + purpose). + +In particular, if the driver requires remote wakeup capability for proper +functioning and device_may_wakeup() returns 'false' for the device, then +->runtime_suspend() should return -EBUSY. On the other hand, if +device_may_wakeup() returns 'true' for the device and the device is put +into a low power state during the execution of its bus type's +->runtime_suspend(), it is expected that remote wake-up (i.e. hardware mechanism +allowing the device to request a change of its power state, such as PCI PME) +will be enabled for the device. Generally, remote wake-up should be enabled +for all input devices put into a low power state at run time. + +The ->runtime_resume() callback is executed by the PM core for the bus type of +the device being woken up. The bus type's callback is then _entirely_ +_responsible_ for handling the device as appropriate, which may, but need not +include executing the device driver's own ->runtime_resume() callback (from the +PM core's point of view it is not necessary to implement a ->runtime_resume() +callback in a device driver as long as the bus type's ->runtime_resume() knows +what to do to handle the device). + + * Once the bus type's ->runtime_resume() callback has completed successfully, + the PM core regards the device as fully operational, which means that the + device _must_ be able to complete I/O operations as needed. The run-time + PM status of the device is then 'active'. + + * If the bus type's ->runtime_resume() callback returns an error code, the PM + core regards this as a fatal error and will refuse to run the helper + functions described in Section 4 for the device, until its status is + directly set either to 'active' or to 'suspended' (the PM core provides + special helper functions for this purpose). + +The ->runtime_idle() callback is executed by the PM core for the bus type of +given device whenever the device appears to be idle, which is indicated to the +PM core by two counters, the device's usage counter and the counter of 'active' +children of the device. + + * If any of these counters is decreased using a helper function provided by + the PM core and it turns out to be equal to zero, the other counter is + checked. If that counter also is equal to zero, the PM core executes the + device bus type's ->runtime_idle() callback (with the device as an + argument). + +The action performed by a bus type's ->runtime_idle() callback is totally +dependent on the bus type in question, but the expected and recommended action +is to check if the device can be suspended (i.e. if all of the conditions +necessary for suspending the device are satisfied) and to queue up a suspend +request for the device in that case. + +The helper functions provided by the PM core, described in Section 4, guarantee +that the following constraints are met with respect to the bus type's run-time +PM callbacks: + +(1) The callbacks are mutually exclusive (e.g. it is forbidden to execute + ->runtime_suspend() in parallel with ->runtime_resume() or with another + instance of ->runtime_suspend() for the same device) with the exception that + ->runtime_suspend() or ->runtime_resume() can be executed in parallel with + ->runtime_idle() (although ->runtime_idle() will not be started while any + of the other callbacks is being executed for the same device). + +(2) ->runtime_idle() and ->runtime_suspend() can only be executed for 'active' + devices (i.e. the PM core will only execute ->runtime_idle() or + ->runtime_suspend() for the devices the run-time PM status of which is + 'active'). + +(3) ->runtime_idle() and ->runtime_suspend() can only be executed for a device + the usage counter of which is equal to zero _and_ either the counter of + 'active' children of which is equal to zero, or the 'power.ignore_children' + flag of which is set. + +(4) ->runtime_resume() can only be executed for 'suspended' devices (i.e. the + PM core will only execute ->runtime_resume() for the devices the run-time + PM status of which is 'suspended'). + +Additionally, the helper functions provided by the PM core obey the following +rules: + + * If ->runtime_suspend() is about to be executed or there's a pending request + to execute it, ->runtime_idle() will not be executed for the same device. + + * A request to execute or to schedule the execution of ->runtime_suspend() + will cancel any pending requests to execute ->runtime_idle() for the same + device. + + * If ->runtime_resume() is about to be executed or there's a pending request + to execute it, the other callbacks will not be executed for the same device. + + * A request to execute ->runtime_resume() will cancel any pending or + scheduled requests to execute the other callbacks for the same device. + +3. Run-time PM Device Fields + +The following device run-time PM fields are present in 'struct dev_pm_info', as +defined in include/linux/pm.h: + + struct timer_list suspend_timer; + - timer used for scheduling (delayed) suspend request + + unsigned long timer_expires; + - timer expiration time, in jiffies (if this is different from zero, the + timer is running and will expire at that time, otherwise the timer is not + running) + + struct work_struct work; + - work structure used for queuing up requests (i.e. work items in pm_wq) + + wait_queue_head_t wait_queue; + - wait queue used if any of the helper functions needs to wait for another + one to complete + + spinlock_t lock; + - lock used for synchronisation + + atomic_t usage_count; + - the usage counter of the device + + atomic_t child_count; + - the count of 'active' children of the device + + unsigned int ignore_children; + - if set, the value of child_count is ignored (but still updated) + + unsigned int disable_depth; + - used for disabling the helper funcions (they work normally if this is + equal to zero); the initial value of it is 1 (i.e. run-time PM is + initially disabled for all devices) + + unsigned int runtime_error; + - if set, there was a fatal error (one of the callbacks returned error code + as described in Section 2), so the helper funtions will not work until + this flag is cleared; this is the error code returned by the failing + callback + + unsigned int idle_notification; + - if set, ->runtime_idle() is being executed + + unsigned int request_pending; + - if set, there's a pending request (i.e. a work item queued up into pm_wq) + + enum rpm_request request; + - type of request that's pending (valid if request_pending is set) + + unsigned int deferred_resume; + - set if ->runtime_resume() is about to be run while ->runtime_suspend() is + being executed for that device and it is not practical to wait for the + suspend to complete; means "start a resume as soon as you've suspended" + + enum rpm_status runtime_status; + - the run-time PM status of the device; this field's initial value is + RPM_SUSPENDED, which means that each device is initially regarded by the + PM core as 'suspended', regardless of its real hardware status + +All of the above fields are members of the 'power' member of 'struct device'. + +4. Run-time PM Device Helper Functions + +The following run-time PM helper functions are defined in +drivers/base/power/runtime.c and include/linux/pm_runtime.h: + + void pm_runtime_init(struct device *dev); + - initialize the device run-time PM fields in 'struct dev_pm_info' + + void pm_runtime_remove(struct device *dev); + - make sure that the run-time PM of the device will be disabled after + removing the device from device hierarchy + + int pm_runtime_idle(struct device *dev); + - execute ->runtime_idle() for the device's bus type; returns 0 on success + or error code on failure, where -EINPROGRESS means that ->runtime_idle() + is already being executed + + int pm_runtime_suspend(struct device *dev); + - execute ->runtime_suspend() for the device's bus type; returns 0 on + success, 1 if the device's run-time PM status was already 'suspended', or + error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt + to suspend the device again in future + + int pm_runtime_resume(struct device *dev); + - execute ->runtime_resume() for the device's bus type; returns 0 on + success, 1 if the device's run-time PM status was already 'active' or + error code on failure, where -EAGAIN means it may be safe to attempt to + resume the device again in future, but 'power.runtime_error' should be + checked additionally + + int pm_request_idle(struct device *dev); + - submit a request to execute ->runtime_idle() for the device's bus type + (the request is represented by a work item in pm_wq); returns 0 on success + or error code if the request has not been queued up + + int pm_schedule_suspend(struct device *dev, unsigned int delay); + - schedule the execution of ->runtime_suspend() for the device's bus type + in future, where 'delay' is the time to wait before queuing up a suspend + work item in pm_wq, in milliseconds (if 'delay' is zero, the work item is + queued up immediately); returns 0 on success, 1 if the device's PM + run-time status was already 'suspended', or error code if the request + hasn't been scheduled (or queued up if 'delay' is 0); if the execution of + ->runtime_suspend() is already scheduled and not yet expired, the new + value of 'delay' will be used as the time to wait + + int pm_request_resume(struct device *dev); + - submit a request to execute ->runtime_resume() for the device's bus type + (the request is represented by a work item in pm_wq); returns 0 on + success, 1 if the device's run-time PM status was already 'active', or + error code if the request hasn't been queued up + + void pm_runtime_get_noresume(struct device *dev); + - increment the device's usage counter + + int pm_runtime_get(struct device *dev); + - increment the device's usage counter, run pm_request_resume(dev) and + return its result + + int pm_runtime_get_sync(struct device *dev); + - increment the device's usage counter, run pm_runtime_resume(dev) and + return its result + + void pm_runtime_put_noidle(struct device *dev); + - decrement the device's usage counter + + int pm_runtime_put(struct device *dev); + - decrement the device's usage counter, run pm_request_idle(dev) and return + its result + + int pm_runtime_put_sync(struct device *dev); + - decrement the device's usage counter, run pm_runtime_idle(dev) and return + its result + + void pm_runtime_enable(struct device *dev); + - enable the run-time PM helper functions to run the device bus type's + run-time PM callbacks described in Section 2 + + int pm_runtime_disable(struct device *dev); + - prevent the run-time PM helper functions from running the device bus + type's run-time PM callbacks, make sure that all of the pending run-time + PM operations on the device are either completed or canceled; returns + 1 if there was a resume request pending and it was necessary to execute + ->runtime_resume() for the device's bus type to satisfy that request, + otherwise 0 is returned + + void pm_suspend_ignore_children(struct device *dev, bool enable); + - set/unset the power.ignore_children flag of the device + + int pm_runtime_set_active(struct device *dev); + - clear the device's 'power.runtime_error' flag, set the device's run-time + PM status to 'active' and update its parent's counter of 'active' + children as appropriate (it is only valid to use this function if + 'power.runtime_error' is set or 'power.disable_depth' is greater than + zero); it will fail and return error code if the device has a parent + which is not active and the 'power.ignore_children' flag of which is unset + + void pm_runtime_set_suspended(struct device *dev); + - clear the device's 'power.runtime_error' flag, set the device's run-time + PM status to 'suspended' and update its parent's counter of 'active' + children as appropriate (it is only valid to use this function if + 'power.runtime_error' is set or 'power.disable_depth' is greater than + zero) + +It is safe to execute the following helper functions from interrupt context: + +pm_request_idle() +pm_schedule_suspend() +pm_request_resume() +pm_runtime_get_noresume() +pm_runtime_get() +pm_runtime_put_noidle() +pm_runtime_put() +pm_suspend_ignore_children() +pm_runtime_set_active() +pm_runtime_set_suspended() +pm_runtime_enable() + +5. Run-time PM Initialization, Device Probing and Removal + +Initially, the run-time PM is disabled for all devices, which means that the +majority of the run-time PM helper funtions described in Section 4 will return +-EAGAIN until pm_runtime_enable() is called for the device. + +In addition to that, the initial run-time PM status of all devices is +'suspended', but it need not reflect the actual physical state of the device. +Thus, if the device is initially active (i.e. it is able to process I/O), its +run-time PM status must be changed to 'active', with the help of +pm_runtime_set_active(), before pm_runtime_enable() is called for the device. + +However, if the device has a parent and the parent's run-time PM is enabled, +calling pm_runtime_set_active() for the device will affect the parent, unless +the parent's 'power.ignore_children' flag is set. Namely, in that case the +parent won't be able to suspend at run time, using the PM core's helper +functions, as long as the child's status is 'active', even if the child's +run-time PM is still disabled (i.e. pm_runtime_enable() hasn't been called for +the child yet or pm_runtime_disable() has been called for it). For this reason, +once pm_runtime_set_active() has been called for the device, pm_runtime_enable() +should be called for it too as soon as reasonably possible or its run-time PM +status should be changed back to 'suspended' with the help of +pm_runtime_set_suspended(). + +If the default initial run-time PM status of the device (i.e. 'suspended') +reflects the actual state of the device, its bus type's or its driver's +->probe() callback will likely need to wake it up using one of the PM core's +helper functions described in Section 4. In that case, pm_runtime_resume() +should be used. Of course, for this purpose the device's run-time PM has to be +enabled earlier by calling pm_runtime_enable(). + +If the device bus type's or driver's ->probe() or ->remove() callback runs +pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts, +they will fail returning -EAGAIN, because the device's usage counter is +incremented by the core before executing ->probe() and ->remove(). Still, it +may be desirable to suspend the device as soon as ->probe() or ->remove() has +finished, so the PM core uses pm_runtime_idle_sync() to invoke the device bus +type's ->runtime_idle() callback at that time. diff --git a/drivers/base/dd.c b/drivers/base/dd.c index f0106875f01..7b34b3a48f6 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "base.h" #include "power/power.h" @@ -202,7 +203,10 @@ int driver_probe_device(struct device_driver *drv, struct device *dev) pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); + pm_runtime_get_noresume(dev); + pm_runtime_barrier(dev); ret = really_probe(dev, drv); + pm_runtime_put_sync(dev); return ret; } @@ -245,7 +249,9 @@ int device_attach(struct device *dev) ret = 0; } } else { + pm_runtime_get_noresume(dev); ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach); + pm_runtime_put_sync(dev); } up(&dev->sem); return ret; @@ -306,6 +312,9 @@ static void __device_release_driver(struct device *dev) drv = dev->driver; if (drv) { + pm_runtime_get_noresume(dev); + pm_runtime_barrier(dev); + driver_sysfs_remove(dev); if (dev->bus) @@ -324,6 +333,8 @@ static void __device_release_driver(struct device *dev) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_UNBOUND_DRIVER, dev); + + pm_runtime_put_sync(dev); } } diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile index 911208b8925..3ce3519e8f3 100644 --- a/drivers/base/power/Makefile +++ b/drivers/base/power/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_PM) += sysfs.o obj-$(CONFIG_PM_SLEEP) += main.o +obj-$(CONFIG_PM_RUNTIME) += runtime.o obj-$(CONFIG_PM_TRACE_RTC) += trace.o ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 1b1a786b7de..86990011277 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -48,6 +49,16 @@ static DEFINE_MUTEX(dpm_list_mtx); */ static bool transition_started; +/** + * device_pm_init - Initialize the PM-related part of a device object + * @dev: Device object being initialized. + */ +void device_pm_init(struct device *dev) +{ + dev->power.status = DPM_ON; + pm_runtime_init(dev); +} + /** * device_pm_lock - lock the list of active devices used by the PM core */ @@ -105,6 +116,7 @@ void device_pm_remove(struct device *dev) mutex_lock(&dpm_list_mtx); list_del_init(&dev->power.entry); mutex_unlock(&dpm_list_mtx); + pm_runtime_remove(dev); } /** @@ -512,6 +524,7 @@ static void dpm_complete(pm_message_t state) mutex_unlock(&dpm_list_mtx); device_complete(dev, state); + pm_runtime_put_noidle(dev); mutex_lock(&dpm_list_mtx); } @@ -757,7 +770,14 @@ static int dpm_prepare(pm_message_t state) dev->power.status = DPM_PREPARING; mutex_unlock(&dpm_list_mtx); - error = device_prepare(dev, state); + pm_runtime_get_noresume(dev); + if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) { + /* Wake-up requested during system sleep transition. */ + pm_runtime_put_noidle(dev); + error = -EBUSY; + } else { + error = device_prepare(dev, state); + } mutex_lock(&dpm_list_mtx); if (error) { diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index c7cb4fc3735..b8fa1aa5225 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -1,7 +1,14 @@ -static inline void device_pm_init(struct device *dev) -{ - dev->power.status = DPM_ON; -} +#ifdef CONFIG_PM_RUNTIME + +extern void pm_runtime_init(struct device *dev); +extern void pm_runtime_remove(struct device *dev); + +#else /* !CONFIG_PM_RUNTIME */ + +static inline void pm_runtime_init(struct device *dev) {} +static inline void pm_runtime_remove(struct device *dev) {} + +#endif /* !CONFIG_PM_RUNTIME */ #ifdef CONFIG_PM_SLEEP @@ -16,23 +23,33 @@ static inline struct device *to_device(struct list_head *entry) return container_of(entry, struct device, power.entry); } +extern void device_pm_init(struct device *dev); extern void device_pm_add(struct device *); extern void device_pm_remove(struct device *); extern void device_pm_move_before(struct device *, struct device *); extern void device_pm_move_after(struct device *, struct device *); extern void device_pm_move_last(struct device *); -#else /* CONFIG_PM_SLEEP */ +#else /* !CONFIG_PM_SLEEP */ + +static inline void device_pm_init(struct device *dev) +{ + pm_runtime_init(dev); +} + +static inline void device_pm_remove(struct device *dev) +{ + pm_runtime_remove(dev); +} static inline void device_pm_add(struct device *dev) {} -static inline void device_pm_remove(struct device *dev) {} static inline void device_pm_move_before(struct device *deva, struct device *devb) {} static inline void device_pm_move_after(struct device *deva, struct device *devb) {} static inline void device_pm_move_last(struct device *dev) {} -#endif +#endif /* !CONFIG_PM_SLEEP */ #ifdef CONFIG_PM diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c new file mode 100644 index 00000000000..38556f6cc22 --- /dev/null +++ b/drivers/base/power/runtime.c @@ -0,0 +1,1011 @@ +/* + * drivers/base/power/runtime.c - Helper functions for device run-time PM + * + * Copyright (c) 2009 Rafael J. Wysocki , Novell Inc. + * + * This file is released under the GPLv2. + */ + +#include +#include +#include + +static int __pm_runtime_resume(struct device *dev, bool from_wq); +static int __pm_request_idle(struct device *dev); +static int __pm_request_resume(struct device *dev); + +/** + * pm_runtime_deactivate_timer - Deactivate given device's suspend timer. + * @dev: Device to handle. + */ +static void pm_runtime_deactivate_timer(struct device *dev) +{ + if (dev->power.timer_expires > 0) { + del_timer(&dev->power.suspend_timer); + dev->power.timer_expires = 0; + } +} + +/** + * pm_runtime_cancel_pending - Deactivate suspend timer and cancel requests. + * @dev: Device to handle. + */ +static void pm_runtime_cancel_pending(struct device *dev) +{ + pm_runtime_deactivate_timer(dev); + /* + * In case there's a request pending, make sure its work function will + * return without doing anything. + */ + dev->power.request = RPM_REQ_NONE; +} + +/** + * __pm_runtime_idle - Notify device bus type if the device can be suspended. + * @dev: Device to notify the bus type about. + * + * This function must be called under dev->power.lock with interrupts disabled. + */ +static int __pm_runtime_idle(struct device *dev) + __releases(&dev->power.lock) __acquires(&dev->power.lock) +{ + int retval = 0; + + dev_dbg(dev, "__pm_runtime_idle()!\n"); + + if (dev->power.runtime_error) + retval = -EINVAL; + else if (dev->power.idle_notification) + retval = -EINPROGRESS; + else if (atomic_read(&dev->power.usage_count) > 0 + || dev->power.disable_depth > 0 + || dev->power.runtime_status != RPM_ACTIVE) + retval = -EAGAIN; + else if (!pm_children_suspended(dev)) + retval = -EBUSY; + if (retval) + goto out; + + if (dev->power.request_pending) { + /* + * If an idle notification request is pending, cancel it. Any + * other pending request takes precedence over us. + */ + if (dev->power.request == RPM_REQ_IDLE) { + dev->power.request = RPM_REQ_NONE; + } else if (dev->power.request != RPM_REQ_NONE) { + retval = -EAGAIN; + goto out; + } + } + + dev->power.idle_notification = true; + + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_idle) { + spin_unlock_irq(&dev->power.lock); + + dev->bus->pm->runtime_idle(dev); + + spin_lock_irq(&dev->power.lock); + } + + dev->power.idle_notification = false; + wake_up_all(&dev->power.wait_queue); + + out: + dev_dbg(dev, "__pm_runtime_idle() returns %d!\n", retval); + + return retval; +} + +/** + * pm_runtime_idle - Notify device bus type if the device can be suspended. + * @dev: Device to notify the bus type about. + */ +int pm_runtime_idle(struct device *dev) +{ + int retval; + + spin_lock_irq(&dev->power.lock); + retval = __pm_runtime_idle(dev); + spin_unlock_irq(&dev->power.lock); + + return retval; +} +EXPORT_SYMBOL_GPL(pm_runtime_idle); + +/** + * __pm_runtime_suspend - Carry out run-time suspend of given device. + * @dev: Device to suspend. + * @from_wq: If set, the function has been called via pm_wq. + * + * Check if the device can be suspended and run the ->runtime_suspend() callback + * provided by its bus type. If another suspend has been started earlier, wait + * for it to finish. If an idle notification or suspend request is pending or + * scheduled, cancel it. + * + * This function must be called under dev->power.lock with interrupts disabled. + */ +int __pm_runtime_suspend(struct device *dev, bool from_wq) + __releases(&dev->power.lock) __acquires(&dev->power.lock) +{ + struct device *parent = NULL; + bool notify = false; + int retval = 0; + + dev_dbg(dev, "__pm_runtime_suspend()%s!\n", + from_wq ? " from workqueue" : ""); + + repeat: + if (dev->power.runtime_error) { + retval = -EINVAL; + goto out; + } + + /* Pending resume requests take precedence over us. */ + if (dev->power.request_pending + && dev->power.request == RPM_REQ_RESUME) { + retval = -EAGAIN; + goto out; + } + + /* Other scheduled or pending requests need to be canceled. */ + pm_runtime_cancel_pending(dev); + + if (dev->power.runtime_status == RPM_SUSPENDED) + retval = 1; + else if (dev->power.runtime_status == RPM_RESUMING + || dev->power.disable_depth > 0 + || atomic_read(&dev->power.usage_count) > 0) + retval = -EAGAIN; + else if (!pm_children_suspended(dev)) + retval = -EBUSY; + if (retval) + goto out; + + if (dev->power.runtime_status == RPM_SUSPENDING) { + DEFINE_WAIT(wait); + + if (from_wq) { + retval = -EINPROGRESS; + goto out; + } + + /* Wait for the other suspend running in parallel with us. */ + for (;;) { + prepare_to_wait(&dev->power.wait_queue, &wait, + TASK_UNINTERRUPTIBLE); + if (dev->power.runtime_status != RPM_SUSPENDING) + break; + + spin_unlock_irq(&dev->power.lock); + + schedule(); + + spin_lock_irq(&dev->power.lock); + } + finish_wait(&dev->power.wait_queue, &wait); + goto repeat; + } + + dev->power.runtime_status = RPM_SUSPENDING; + + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend) { + spin_unlock_irq(&dev->power.lock); + + retval = dev->bus->pm->runtime_suspend(dev); + + spin_lock_irq(&dev->power.lock); + dev->power.runtime_error = retval; + } else { + retval = -ENOSYS; + } + + if (retval) { + dev->power.runtime_status = RPM_ACTIVE; + pm_runtime_cancel_pending(dev); + dev->power.deferred_resume = false; + + if (retval == -EAGAIN || retval == -EBUSY) { + notify = true; + dev->power.runtime_error = 0; + } + } else { + dev->power.runtime_status = RPM_SUSPENDED; + + if (dev->parent) { + parent = dev->parent; + atomic_add_unless(&parent->power.child_count, -1, 0); + } + } + wake_up_all(&dev->power.wait_queue); + + if (dev->power.deferred_resume) { + dev->power.deferred_resume = false; + __pm_runtime_resume(dev, false); + retval = -EAGAIN; + goto out; + } + + if (notify) + __pm_runtime_idle(dev); + + if (parent && !parent->power.ignore_children) { + spin_unlock_irq(&dev->power.lock); + + pm_request_idle(parent); + + spin_lock_irq(&dev->power.lock); + } + + out: + dev_dbg(dev, "__pm_runtime_suspend() returns %d!\n", retval); + + return retval; +} + +/** + * pm_runtime_suspend - Carry out run-time suspend of given device. + * @dev: Device to suspend. + */ +int pm_runtime_suspend(struct device *dev) +{ + int retval; + + spin_lock_irq(&dev->power.lock); + retval = __pm_runtime_suspend(dev, false); + spin_unlock_irq(&dev->power.lock); + + return retval; +} +EXPORT_SYMBOL_GPL(pm_runtime_suspend); + +/** + * __pm_runtime_resume - Carry out run-time resume of given device. + * @dev: Device to resume. + * @from_wq: If set, the function has been called via pm_wq. + * + * Check if the device can be woken up and run the ->runtime_resume() callback + * provided by its bus type. If another resume has been started earlier, wait + * for it to finish. If there's a suspend running in parallel with this + * function, wait for it to finish and resume the device. Cancel any scheduled + * or pending requests. + * + * This function must be called under dev->power.lock with interrupts disabled. + */ +int __pm_runtime_resume(struct device *dev, bool from_wq) + __releases(&dev->power.lock) __acquires(&dev->power.lock) +{ + struct device *parent = NULL; + int retval = 0; + + dev_dbg(dev, "__pm_runtime_resume()%s!\n", + from_wq ? " from workqueue" : ""); + + repeat: + if (dev->power.runtime_error) { + retval = -EINVAL; + goto out; + } + + pm_runtime_cancel_pending(dev); + + if (dev->power.runtime_status == RPM_ACTIVE) + retval = 1; + else if (dev->power.disable_depth > 0) + retval = -EAGAIN; + if (retval) + goto out; + + if (dev->power.runtime_status == RPM_RESUMING + || dev->power.runtime_status == RPM_SUSPENDING) { + DEFINE_WAIT(wait); + + if (from_wq) { + if (dev->power.runtime_status == RPM_SUSPENDING) + dev->power.deferred_resume = true; + retval = -EINPROGRESS; + goto out; + } + + /* Wait for the operation carried out in parallel with us. */ + for (;;) { + prepare_to_wait(&dev->power.wait_queue, &wait, + TASK_UNINTERRUPTIBLE); + if (dev->power.runtime_status != RPM_RESUMING + && dev->power.runtime_status != RPM_SUSPENDING) + break; + + spin_unlock_irq(&dev->power.lock); + + schedule(); + + spin_lock_irq(&dev->power.lock); + } + finish_wait(&dev->power.wait_queue, &wait); + goto repeat; + } + + if (!parent && dev->parent) { + /* + * Increment the parent's resume counter and resume it if + * necessary. + */ + parent = dev->parent; + spin_unlock_irq(&dev->power.lock); + + pm_runtime_get_noresume(parent); + + spin_lock_irq(&parent->power.lock); + /* + * We can resume if the parent's run-time PM is disabled or it + * is set to ignore children. + */ + if (!parent->power.disable_depth + && !parent->power.ignore_children) { + __pm_runtime_resume(parent, false); + if (parent->power.runtime_status != RPM_ACTIVE) + retval = -EBUSY; + } + spin_unlock_irq(&parent->power.lock); + + spin_lock_irq(&dev->power.lock); + if (retval) + goto out; + goto repeat; + } + + dev->power.runtime_status = RPM_RESUMING; + + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume) { + spin_unlock_irq(&dev->power.lock); + + retval = dev->bus->pm->runtime_resume(dev); + + spin_lock_irq(&dev->power.lock); + dev->power.runtime_error = retval; + } else { + retval = -ENOSYS; + } + + if (retval) { + dev->power.runtime_status = RPM_SUSPENDED; + pm_runtime_cancel_pending(dev); + } else { + dev->power.runtime_status = RPM_ACTIVE; + if (parent) + atomic_inc(&parent->power.child_count); + } + wake_up_all(&dev->power.wait_queue); + + if (!retval) + __pm_request_idle(dev); + + out: + if (parent) { + spin_unlock_irq(&dev->power.lock); + + pm_runtime_put(parent); + + spin_lock_irq(&dev->power.lock); + } + + dev_dbg(dev, "__pm_runtime_resume() returns %d!\n", retval); + + return retval; +} + +/** + * pm_runtime_resume - Carry out run-time resume of given device. + * @dev: Device to suspend. + */ +int pm_runtime_resume(struct device *dev) +{ + int retval; + + spin_lock_irq(&dev->power.lock); + retval = __pm_runtime_resume(dev, false); + spin_unlock_irq(&dev->power.lock); + + return retval; +} +EXPORT_SYMBOL_GPL(pm_runtime_resume); + +/** + * pm_runtime_work - Universal run-time PM work function. + * @work: Work structure used for scheduling the execution of this function. + * + * Use @work to get the device object the work is to be done for, determine what + * is to be done and execute the appropriate run-time PM function. + */ +static void pm_runtime_work(struct work_struct *work) +{ + struct device *dev = container_of(work, struct device, power.work); + enum rpm_request req; + + spin_lock_irq(&dev->power.lock); + + if (!dev->power.request_pending) + goto out; + + req = dev->power.request; + dev->power.request = RPM_REQ_NONE; + dev->power.request_pending = false; + + switch (req) { + case RPM_REQ_NONE: + break; + case RPM_REQ_IDLE: + __pm_runtime_idle(dev); + break; + case RPM_REQ_SUSPEND: + __pm_runtime_suspend(dev, true); + break; + case RPM_REQ_RESUME: + __pm_runtime_resume(dev, true); + break; + } + + out: + spin_unlock_irq(&dev->power.lock); +} + +/** + * __pm_request_idle - Submit an idle notification request for given device. + * @dev: Device to handle. + * + * Check if the device's run-time PM status is correct for suspending the device + * and queue up a request to run __pm_runtime_idle() for it. + * + * This function must be called under dev->power.lock with interrupts disabled. + */ +static int __pm_request_idle(struct device *dev) +{ + int retval = 0; + + if (dev->power.runtime_error) + retval = -EINVAL; + else if (atomic_read(&dev->power.usage_count) > 0 + || dev->power.disable_depth > 0 + || dev->power.runtime_status == RPM_SUSPENDED + || dev->power.runtime_status == RPM_SUSPENDING) + retval = -EAGAIN; + else if (!pm_children_suspended(dev)) + retval = -EBUSY; + if (retval) + return retval; + + if (dev->power.request_pending) { + /* Any requests other then RPM_REQ_IDLE take precedence. */ + if (dev->power.request == RPM_REQ_NONE) + dev->power.request = RPM_REQ_IDLE; + else if (dev->power.request != RPM_REQ_IDLE) + retval = -EAGAIN; + return retval; + } + + dev->power.request = RPM_REQ_IDLE; + dev->power.request_pending = true; + queue_work(pm_wq, &dev->power.work); + + return retval; +} + +/** + * pm_request_idle - Submit an idle notification request for given device. + * @dev: Device to handle. + */ +int pm_request_idle(struct device *dev) +{ + unsigned long flags; + int retval; + + spin_lock_irqsave(&dev->power.lock, flags); + retval = __pm_request_idle(dev); + spin_unlock_irqrestore(&dev->power.lock, flags); + + return retval; +} +EXPORT_SYMBOL_GPL(pm_request_idle); + +/** + * __pm_request_suspend - Submit a suspend request for given device. + * @dev: Device to suspend. + * + * This function must be called under dev->power.lock with interrupts disabled. + */ +static int __pm_request_suspend(struct device *dev) +{ + int retval = 0; + + if (dev->power.runtime_error) + return -EINVAL; + + if (dev->power.runtime_status == RPM_SUSPENDED) + retval = 1; + else if (atomic_read(&dev->power.usage_count) > 0 + || dev->power.disable_depth > 0) + retval = -EAGAIN; + else if (dev->power.runtime_status == RPM_SUSPENDING) + retval = -EINPROGRESS; + else if (!pm_children_suspended(dev)) + retval = -EBUSY; + if (retval < 0) + return retval; + + pm_runtime_deactivate_timer(dev); + + if (dev->power.request_pending) { + /* + * Pending resume requests take precedence over us, but we can + * overtake any other pending request. + */ + if (dev->power.request == RPM_REQ_RESUME) + retval = -EAGAIN; + else if (dev->power.request != RPM_REQ_SUSPEND) + dev->power.request = retval ? + RPM_REQ_NONE : RPM_REQ_SUSPEND; + return retval; + } else if (retval) { + return retval; + } + + dev->power.request = RPM_REQ_SUSPEND; + dev->power.request_pending = true; + queue_work(pm_wq, &dev->power.work); + + return 0; +} + +/** + * pm_suspend_timer_fn - Timer function for pm_schedule_suspend(). + * @data: Device pointer passed by pm_schedule_suspend(). + * + * Check if the time is right and execute __pm_request_suspend() in that case. + */ +static void pm_suspend_timer_fn(unsigned long data) +{ + struct device *dev = (struct device *)data; + unsigned long flags; + unsigned long expires; + + spin_lock_irqsave(&dev->power.lock, flags); + + expires = dev->power.timer_expires; + /* If 'expire' is after 'jiffies' we've been called too early. */ + if (expires > 0 && !time_after(expires, jiffies)) { + dev->power.timer_expires = 0; + __pm_request_suspend(dev); + } + + spin_unlock_irqrestore(&dev->power.lock, flags); +} + +/** + * pm_schedule_suspend - Set up a timer to submit a suspend request in future. + * @dev: Device to suspend. + * @delay: Time to wait before submitting a suspend request, in milliseconds. + */ +int pm_schedule_suspend(struct device *dev, unsigned int delay) +{ + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&dev->power.lock, flags); + + if (dev->power.runtime_error) { + retval = -EINVAL; + goto out; + } + + if (!delay) { + retval = __pm_request_suspend(dev); + goto out; + } + + pm_runtime_deactivate_timer(dev); + + if (dev->power.request_pending) { + /* + * Pending resume requests take precedence over us, but any + * other pending requests have to be canceled. + */ + if (dev->power.request == RPM_REQ_RESUME) { + retval = -EAGAIN; + goto out; + } + dev->power.request = RPM_REQ_NONE; + } + + if (dev->power.runtime_status == RPM_SUSPENDED) + retval = 1; + else if (dev->power.runtime_status == RPM_SUSPENDING) + retval = -EINPROGRESS; + else if (atomic_read(&dev->power.usage_count) > 0 + || dev->power.disable_depth > 0) + retval = -EAGAIN; + else if (!pm_children_suspended(dev)) + retval = -EBUSY; + if (retval) + goto out; + + dev->power.timer_expires = jiffies + msecs_to_jiffies(delay); + mod_timer(&dev->power.suspend_timer, dev->power.timer_expires); + + out: + spin_unlock_irqrestore(&dev->power.lock, flags); + + return retval; +} +EXPORT_SYMBOL_GPL(pm_schedule_suspend); + +/** + * pm_request_resume - Submit a resume request for given device. + * @dev: Device to resume. + * + * This function must be called under dev->power.lock with interrupts disabled. + */ +static int __pm_request_resume(struct device *dev) +{ + int retval = 0; + + if (dev->power.runtime_error) + return -EINVAL; + + if (dev->power.runtime_status == RPM_ACTIVE) + retval = 1; + else if (dev->power.runtime_status == RPM_RESUMING) + retval = -EINPROGRESS; + else if (dev->power.disable_depth > 0) + retval = -EAGAIN; + if (retval < 0) + return retval; + + pm_runtime_deactivate_timer(dev); + + if (dev->power.request_pending) { + /* If non-resume request is pending, we can overtake it. */ + dev->power.request = retval ? RPM_REQ_NONE : RPM_REQ_RESUME; + return retval; + } else if (retval) { + return retval; + } + + dev->power.request = RPM_REQ_RESUME; + dev->power.request_pending = true; + queue_work(pm_wq, &dev->power.work); + + return retval; +} + +/** + * pm_request_resume - Submit a resume request for given device. + * @dev: Device to resume. + */ +int pm_request_resume(struct device *dev) +{ + unsigned long flags; + int retval; + + spin_lock_irqsave(&dev->power.lock, flags); + retval = __pm_request_resume(dev); + spin_unlock_irqrestore(&dev->power.lock, flags); + + return retval; +} +EXPORT_SYMBOL_GPL(pm_request_resume); + +/** + * __pm_runtime_get - Reference count a device and wake it up, if necessary. + * @dev: Device to handle. + * @sync: If set and the device is suspended, resume it synchronously. + * + * Increment the usage count of the device and if it was zero previously, + * resume it or submit a resume request for it, depending on the value of @sync. + */ +int __pm_runtime_get(struct device *dev, bool sync) +{ + int retval = 1; + + if (atomic_add_return(1, &dev->power.usage_count) == 1) + retval = sync ? pm_runtime_resume(dev) : pm_request_resume(dev); + + return retval; +} +EXPORT_SYMBOL_GPL(__pm_runtime_get); + +/** + * __pm_runtime_put - Decrement the device's usage counter and notify its bus. + * @dev: Device to handle. + * @sync: If the device's bus type is to be notified, do that synchronously. + * + * Decrement the usage count of the device and if it reaches zero, carry out a + * synchronous idle notification or submit an idle notification request for it, + * depending on the value of @sync. + */ +int __pm_runtime_put(struct device *dev, bool sync) +{ + int retval = 0; + + if (atomic_dec_and_test(&dev->power.usage_count)) + retval = sync ? pm_runtime_idle(dev) : pm_request_idle(dev); + + return retval; +} +EXPORT_SYMBOL_GPL(__pm_runtime_put); + +/** + * __pm_runtime_set_status - Set run-time PM status of a device. + * @dev: Device to handle. + * @status: New run-time PM status of the device. + * + * If run-time PM of the device is disabled or its power.runtime_error field is + * different from zero, the status may be changed either to RPM_ACTIVE, or to + * RPM_SUSPENDED, as long as that reflects the actual state of the device. + * However, if the device has a parent and the parent is not active, and the + * parent's power.ignore_children flag is unset, the device's status cannot be + * set to RPM_ACTIVE, so -EBUSY is returned in that case. + * + * If successful, __pm_runtime_set_status() clears the power.runtime_error field + * and the device parent's counter of unsuspended children is modified to + * reflect the new status. If the new status is RPM_SUSPENDED, an idle + * notification request for the parent is submitted. + */ +int __pm_runtime_set_status(struct device *dev, unsigned int status) +{ + struct device *parent = dev->parent; + unsigned long flags; + bool notify_parent = false; + int error = 0; + + if (status != RPM_ACTIVE && status != RPM_SUSPENDED) + return -EINVAL; + + spin_lock_irqsave(&dev->power.lock, flags); + + if (!dev->power.runtime_error && !dev->power.disable_depth) { + error = -EAGAIN; + goto out; + } + + if (dev->power.runtime_status == status) + goto out_set; + + if (status == RPM_SUSPENDED) { + /* It always is possible to set the status to 'suspended'. */ + if (parent) { + atomic_add_unless(&parent->power.child_count, -1, 0); + notify_parent = !parent->power.ignore_children; + } + goto out_set; + } + + if (parent) { + spin_lock_irq(&parent->power.lock); + + /* + * It is invalid to put an active child under a parent that is + * not active, has run-time PM enabled and the + * 'power.ignore_children' flag unset. + */ + if (!parent->power.disable_depth + && !parent->power.ignore_children + && parent->power.runtime_status != RPM_ACTIVE) { + error = -EBUSY; + } else { + if (dev->power.runtime_status == RPM_SUSPENDED) + atomic_inc(&parent->power.child_count); + } + + spin_unlock_irq(&parent->power.lock); + + if (error) + goto out; + } + + out_set: + dev->power.runtime_status = status; + dev->power.runtime_error = 0; + out: + spin_unlock_irqrestore(&dev->power.lock, flags); + + if (notify_parent) + pm_request_idle(parent); + + return error; +} +EXPORT_SYMBOL_GPL(__pm_runtime_set_status); + +/** + * __pm_runtime_barrier - Cancel pending requests and wait for completions. + * @dev: Device to handle. + * + * Flush all pending requests for the device from pm_wq and wait for all + * run-time PM operations involving the device in progress to complete. + * + * Should be called under dev->power.lock with interrupts disabled. + */ +static void __pm_runtime_barrier(struct device *dev) +{ + pm_runtime_deactivate_timer(dev); + + if (dev->power.request_pending) { + dev->power.request = RPM_REQ_NONE; + spin_unlock_irq(&dev->power.lock); + + cancel_work_sync(&dev->power.work); + + spin_lock_irq(&dev->power.lock); + dev->power.request_pending = false; + } + + if (dev->power.runtime_status == RPM_SUSPENDING + || dev->power.runtime_status == RPM_RESUMING + || dev->power.idle_notification) { + DEFINE_WAIT(wait); + + /* Suspend, wake-up or idle notification in progress. */ + for (;;) { + prepare_to_wait(&dev->power.wait_queue, &wait, + TASK_UNINTERRUPTIBLE); + if (dev->power.runtime_status != RPM_SUSPENDING + && dev->power.runtime_status != RPM_RESUMING + && !dev->power.idle_notification) + break; + spin_unlock_irq(&dev->power.lock); + + schedule(); + + spin_lock_irq(&dev->power.lock); + } + finish_wait(&dev->power.wait_queue, &wait); + } +} + +/** + * pm_runtime_barrier - Flush pending requests and wait for completions. + * @dev: Device to handle. + * + * Prevent the device from being suspended by incrementing its usage counter and + * if there's a pending resume request for the device, wake the device up. + * Next, make sure that all pending requests for the device have been flushed + * from pm_wq and wait for all run-time PM operations involving the device in + * progress to complete. + * + * Return value: + * 1, if there was a resume request pending and the device had to be woken up, + * 0, otherwise + */ +int pm_runtime_barrier(struct device *dev) +{ + int retval = 0; + + pm_runtime_get_noresume(dev); + spin_lock_irq(&dev->power.lock); + + if (dev->power.request_pending + && dev->power.request == RPM_REQ_RESUME) { + __pm_runtime_resume(dev, false); + retval = 1; + } + + __pm_runtime_barrier(dev); + + spin_unlock_irq(&dev->power.lock); + pm_runtime_put_noidle(dev); + + return retval; +} +EXPORT_SYMBOL_GPL(pm_runtime_barrier); + +/** + * __pm_runtime_disable - Disable run-time PM of a device. + * @dev: Device to handle. + * @check_resume: If set, check if there's a resume request for the device. + * + * Increment power.disable_depth for the device and if was zero previously, + * cancel all pending run-time PM requests for the device and wait for all + * operations in progress to complete. The device can be either active or + * suspended after its run-time PM has been disabled. + * + * If @check_resume is set and there's a resume request pending when + * __pm_runtime_disable() is called and power.disable_depth is zero, the + * function will wake up the device before disabling its run-time PM. + */ +void __pm_runtime_disable(struct device *dev, bool check_resume) +{ + spin_lock_irq(&dev->power.lock); + + if (dev->power.disable_depth > 0) { + dev->power.disable_depth++; + goto out; + } + + /* + * Wake up the device if there's a resume request pending, because that + * means there probably is some I/O to process and disabling run-time PM + * shouldn't prevent the device from processing the I/O. + */ + if (check_resume && dev->power.request_pending + && dev->power.request == RPM_REQ_RESUME) { + /* + * Prevent suspends and idle notifications from being carried + * out after we have woken up the device. + */ + pm_runtime_get_noresume(dev); + + __pm_runtime_resume(dev, false); + + pm_runtime_put_noidle(dev); + } + + if (!dev->power.disable_depth++) + __pm_runtime_barrier(dev); + + out: + spin_unlock_irq(&dev->power.lock); +} +EXPORT_SYMBOL_GPL(__pm_runtime_disable); + +/** + * pm_runtime_enable - Enable run-time PM of a device. + * @dev: Device to handle. + */ +void pm_runtime_enable(struct device *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->power.lock, flags); + + if (dev->power.disable_depth > 0) + dev->power.disable_depth--; + else + dev_warn(dev, "Unbalanced %s!\n", __func__); + + spin_unlock_irqrestore(&dev->power.lock, flags); +} +EXPORT_SYMBOL_GPL(pm_runtime_enable); + +/** + * pm_runtime_init - Initialize run-time PM fields in given device object. + * @dev: Device object to initialize. + */ +void pm_runtime_init(struct device *dev) +{ + spin_lock_init(&dev->power.lock); + + dev->power.runtime_status = RPM_SUSPENDED; + dev->power.idle_notification = false; + + dev->power.disable_depth = 1; + atomic_set(&dev->power.usage_count, 0); + + dev->power.runtime_error = 0; + + atomic_set(&dev->power.child_count, 0); + pm_suspend_ignore_children(dev, false); + + dev->power.request_pending = false; + dev->power.request = RPM_REQ_NONE; + dev->power.deferred_resume = false; + INIT_WORK(&dev->power.work, pm_runtime_work); + + dev->power.timer_expires = 0; + setup_timer(&dev->power.suspend_timer, pm_suspend_timer_fn, + (unsigned long)dev); + + init_waitqueue_head(&dev->power.wait_queue); +} + +/** + * pm_runtime_remove - Prepare for removing a device from device hierarchy. + * @dev: Device object being removed from device hierarchy. + */ +void pm_runtime_remove(struct device *dev) +{ + __pm_runtime_disable(dev, false); + + /* Change the status back to 'suspended' to match the initial status. */ + if (dev->power.runtime_status == RPM_ACTIVE) + pm_runtime_set_suspended(dev); +} diff --git a/include/linux/pm.h b/include/linux/pm.h index b3f74764a58..2b6e20df0e5 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -22,6 +22,10 @@ #define _LINUX_PM_H #include +#include +#include +#include +#include /* * Callbacks for platform drivers to implement. @@ -165,6 +169,28 @@ typedef struct pm_message { * It is allowed to unregister devices while the above callbacks are being * executed. However, it is not allowed to unregister a device from within any * of its own callbacks. + * + * There also are the following callbacks related to run-time power management + * of devices: + * + * @runtime_suspend: Prepare the device for a condition in which it won't be + * able to communicate with the CPU(s) and RAM due to power management. + * This need not mean that the device should be put into a low power state. + * For example, if the device is behind a link which is about to be turned + * off, the device may remain at full power. If the device does go to low + * power and if device_may_wakeup(dev) is true, remote wake-up (i.e., a + * hardware mechanism allowing the device to request a change of its power + * state, such as PCI PME) should be enabled for it. + * + * @runtime_resume: Put the device into the fully active state in response to a + * wake-up event generated by hardware or at the request of software. If + * necessary, put the device into the full power state and restore its + * registers, so that it is fully operational. + * + * @runtime_idle: Device appears to be inactive and it might be put into a low + * power state if all of the necessary conditions are satisfied. Check + * these conditions and handle the device as appropriate, possibly queueing + * a suspend request for it. The return value is ignored by the PM core. */ struct dev_pm_ops { @@ -182,6 +208,9 @@ struct dev_pm_ops { int (*thaw_noirq)(struct device *dev); int (*poweroff_noirq)(struct device *dev); int (*restore_noirq)(struct device *dev); + int (*runtime_suspend)(struct device *dev); + int (*runtime_resume)(struct device *dev); + int (*runtime_idle)(struct device *dev); }; /** @@ -315,14 +344,80 @@ enum dpm_state { DPM_OFF_IRQ, }; +/** + * Device run-time power management status. + * + * These status labels are used internally by the PM core to indicate the + * current status of a device with respect to the PM core operations. They do + * not reflect the actual power state of the device or its status as seen by the + * driver. + * + * RPM_ACTIVE Device is fully operational. Indicates that the device + * bus type's ->runtime_resume() callback has completed + * successfully. + * + * RPM_SUSPENDED Device bus type's ->runtime_suspend() callback has + * completed successfully. The device is regarded as + * suspended. + * + * RPM_RESUMING Device bus type's ->runtime_resume() callback is being + * executed. + * + * RPM_SUSPENDING Device bus type's ->runtime_suspend() callback is being + * executed. + */ + +enum rpm_status { + RPM_ACTIVE = 0, + RPM_RESUMING, + RPM_SUSPENDED, + RPM_SUSPENDING, +}; + +/** + * Device run-time power management request types. + * + * RPM_REQ_NONE Do nothing. + * + * RPM_REQ_IDLE Run the device bus type's ->runtime_idle() callback + * + * RPM_REQ_SUSPEND Run the device bus type's ->runtime_suspend() callback + * + * RPM_REQ_RESUME Run the device bus type's ->runtime_resume() callback + */ + +enum rpm_request { + RPM_REQ_NONE = 0, + RPM_REQ_IDLE, + RPM_REQ_SUSPEND, + RPM_REQ_RESUME, +}; + struct dev_pm_info { pm_message_t power_state; - unsigned can_wakeup:1; - unsigned should_wakeup:1; + unsigned int can_wakeup:1; + unsigned int should_wakeup:1; enum dpm_state status; /* Owned by the PM core */ -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM_SLEEP struct list_head entry; #endif +#ifdef CONFIG_PM_RUNTIME + struct timer_list suspend_timer; + unsigned long timer_expires; + struct work_struct work; + wait_queue_head_t wait_queue; + spinlock_t lock; + atomic_t usage_count; + atomic_t child_count; + unsigned int disable_depth:3; + unsigned int ignore_children:1; + unsigned int idle_notification:1; + unsigned int request_pending:1; + unsigned int deferred_resume:1; + enum rpm_request request; + enum rpm_status runtime_status; + int runtime_error; +#endif }; /* diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h new file mode 100644 index 00000000000..44087044910 --- /dev/null +++ b/include/linux/pm_runtime.h @@ -0,0 +1,114 @@ +/* + * pm_runtime.h - Device run-time power management helper functions. + * + * Copyright (C) 2009 Rafael J. Wysocki + * + * This file is released under the GPLv2. + */ + +#ifndef _LINUX_PM_RUNTIME_H +#define _LINUX_PM_RUNTIME_H + +#include +#include + +#ifdef CONFIG_PM_RUNTIME + +extern struct workqueue_struct *pm_wq; + +extern int pm_runtime_idle(struct device *dev); +extern int pm_runtime_suspend(struct device *dev); +extern int pm_runtime_resume(struct device *dev); +extern int pm_request_idle(struct device *dev); +extern int pm_schedule_suspend(struct device *dev, unsigned int delay); +extern int pm_request_resume(struct device *dev); +extern int __pm_runtime_get(struct device *dev, bool sync); +extern int __pm_runtime_put(struct device *dev, bool sync); +extern int __pm_runtime_set_status(struct device *dev, unsigned int status); +extern int pm_runtime_barrier(struct device *dev); +extern void pm_runtime_enable(struct device *dev); +extern void __pm_runtime_disable(struct device *dev, bool check_resume); + +static inline bool pm_children_suspended(struct device *dev) +{ + return dev->power.ignore_children + || !atomic_read(&dev->power.child_count); +} + +static inline void pm_suspend_ignore_children(struct device *dev, bool enable) +{ + dev->power.ignore_children = enable; +} + +static inline void pm_runtime_get_noresume(struct device *dev) +{ + atomic_inc(&dev->power.usage_count); +} + +static inline void pm_runtime_put_noidle(struct device *dev) +{ + atomic_add_unless(&dev->power.usage_count, -1, 0); +} + +#else /* !CONFIG_PM_RUNTIME */ + +static inline int pm_runtime_idle(struct device *dev) { return -ENOSYS; } +static inline int pm_runtime_suspend(struct device *dev) { return -ENOSYS; } +static inline int pm_runtime_resume(struct device *dev) { return 0; } +static inline int pm_request_idle(struct device *dev) { return -ENOSYS; } +static inline int pm_schedule_suspend(struct device *dev, unsigned int delay) +{ + return -ENOSYS; +} +static inline int pm_request_resume(struct device *dev) { return 0; } +static inline int __pm_runtime_get(struct device *dev, bool sync) { return 1; } +static inline int __pm_runtime_put(struct device *dev, bool sync) { return 0; } +static inline int __pm_runtime_set_status(struct device *dev, + unsigned int status) { return 0; } +static inline int pm_runtime_barrier(struct device *dev) { return 0; } +static inline void pm_runtime_enable(struct device *dev) {} +static inline void __pm_runtime_disable(struct device *dev, bool c) {} + +static inline bool pm_children_suspended(struct device *dev) { return false; } +static inline void pm_suspend_ignore_children(struct device *dev, bool en) {} +static inline void pm_runtime_get_noresume(struct device *dev) {} +static inline void pm_runtime_put_noidle(struct device *dev) {} + +#endif /* !CONFIG_PM_RUNTIME */ + +static inline int pm_runtime_get(struct device *dev) +{ + return __pm_runtime_get(dev, false); +} + +static inline int pm_runtime_get_sync(struct device *dev) +{ + return __pm_runtime_get(dev, true); +} + +static inline int pm_runtime_put(struct device *dev) +{ + return __pm_runtime_put(dev, false); +} + +static inline int pm_runtime_put_sync(struct device *dev) +{ + return __pm_runtime_put(dev, true); +} + +static inline int pm_runtime_set_active(struct device *dev) +{ + return __pm_runtime_set_status(dev, RPM_ACTIVE); +} + +static inline void pm_runtime_set_suspended(struct device *dev) +{ + __pm_runtime_set_status(dev, RPM_SUSPENDED); +} + +static inline void pm_runtime_disable(struct device *dev) +{ + __pm_runtime_disable(dev, true); +} + +#endif diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index 72067cbdb37..91e09d3b2eb 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -208,3 +208,17 @@ config APM_EMULATION random kernel OOPSes or reboots that don't seem to be related to anything, try disabling/enabling this option (or disabling/enabling APM in your BIOS). + +config PM_RUNTIME + bool "Run-time PM core functionality" + depends on PM + ---help--- + Enable functionality allowing I/O devices to be put into energy-saving + (low power) states at run time (or autosuspended) after a specified + period of inactivity and woken up in response to a hardware-generated + wake-up event or a driver's request. + + Hardware support is generally required for this functionality to work + and the bus type drivers of the buses the devices are on are + responsible for the actual handling of the autosuspend requests and + wake-up events. diff --git a/kernel/power/main.c b/kernel/power/main.c index f710e36930c..347d2cc88cd 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -11,6 +11,7 @@ #include #include #include +#include #include "power.h" @@ -217,8 +218,24 @@ static struct attribute_group attr_group = { .attrs = g, }; +#ifdef CONFIG_PM_RUNTIME +struct workqueue_struct *pm_wq; + +static int __init pm_start_workqueue(void) +{ + pm_wq = create_freezeable_workqueue("pm"); + + return pm_wq ? 0 : -ENOMEM; +} +#else +static inline int pm_start_workqueue(void) { return 0; } +#endif + static int __init pm_init(void) { + int error = pm_start_workqueue(); + if (error) + return error; power_kobj = kobject_create_and_add("power", NULL); if (!power_kobj) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From d6714c22b43fbcbead7e7b706ff270e15f04a791 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sat, 22 Aug 2009 13:56:46 -0700 Subject: rcu: Renamings to increase RCU clarity Make RCU-sched, RCU-bh, and RCU-preempt be underlying implementations, with "RCU" defined in terms of one of the three. Update the outdated rcu_qsctr_inc() names, as these functions no longer increment anything. Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746132696-git-send-email-> Signed-off-by: Ingo Molnar --- Documentation/RCU/trace.txt | 7 ++-- include/linux/rcupdate.h | 21 +++++++++--- include/linux/rcupreempt.h | 4 +-- include/linux/rcutree.h | 8 +++-- kernel/rcupreempt.c | 8 ++--- kernel/rcutree.c | 80 ++++++++++++++++++++++++++++----------------- kernel/rcutree.h | 4 +-- kernel/rcutree_trace.c | 20 ++++++------ kernel/sched.c | 2 +- kernel/softirq.c | 4 +-- 10 files changed, 95 insertions(+), 63 deletions(-) (limited to 'Documentation') diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt index 02cced183b2..187bbf10c92 100644 --- a/Documentation/RCU/trace.txt +++ b/Documentation/RCU/trace.txt @@ -191,8 +191,7 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy). The output of "cat rcu/rcudata" looks as follows: -rcu: -rcu: +rcu_sched: 0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10 1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10 2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10 @@ -306,7 +305,7 @@ comma-separated-variable spreadsheet format. The output of "cat rcu/rcugp" looks as follows: -rcu: completed=33062 gpnum=33063 +rcu_sched: completed=33062 gpnum=33063 rcu_bh: completed=464 gpnum=464 Again, this output is for both "rcu" and "rcu_bh". The fields are @@ -413,7 +412,7 @@ o Each element of the form "1/1 0:127 ^0" represents one struct The output of "cat rcu/rcu_pending" looks as follows: -rcu: +rcu_sched: 0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741 1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792 2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629 diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 3c89d6a2591..e920f0fd59d 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -157,17 +157,28 @@ extern int rcu_scheduler_active; * - call_rcu_sched() and rcu_barrier_sched() * on the write-side to insure proper synchronization. */ -#define rcu_read_lock_sched() preempt_disable() -#define rcu_read_lock_sched_notrace() preempt_disable_notrace() +static inline void rcu_read_lock_sched(void) +{ + preempt_disable(); +} +static inline void rcu_read_lock_sched_notrace(void) +{ + preempt_disable_notrace(); +} /* * rcu_read_unlock_sched - marks the end of a RCU-classic critical section * * See rcu_read_lock_sched for more information. */ -#define rcu_read_unlock_sched() preempt_enable() -#define rcu_read_unlock_sched_notrace() preempt_enable_notrace() - +static inline void rcu_read_unlock_sched(void) +{ + preempt_enable(); +} +static inline void rcu_read_unlock_sched_notrace(void) +{ + preempt_enable_notrace(); +} /** diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h index f164ac9b780..2963f080e48 100644 --- a/include/linux/rcupreempt.h +++ b/include/linux/rcupreempt.h @@ -40,8 +40,8 @@ #include #include -extern void rcu_qsctr_inc(int cpu); -static inline void rcu_bh_qsctr_inc(int cpu) { } +extern void rcu_sched_qs(int cpu); +static inline void rcu_bh_qs(int cpu) { } /* * Someone might want to pass call_rcu_bh as a function pointer. diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index e37d5e2a835..a0852d0d915 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -30,8 +30,8 @@ #ifndef __LINUX_RCUTREE_H #define __LINUX_RCUTREE_H -extern void rcu_qsctr_inc(int cpu); -extern void rcu_bh_qsctr_inc(int cpu); +extern void rcu_sched_qs(int cpu); +extern void rcu_bh_qs(int cpu); extern int rcu_pending(int cpu); extern int rcu_needs_cpu(int cpu); @@ -73,7 +73,8 @@ static inline void __rcu_read_unlock_bh(void) #define __synchronize_sched() synchronize_rcu() -#define call_rcu_sched(head, func) call_rcu(head, func) +extern void call_rcu_sched(struct rcu_head *head, + void (*func)(struct rcu_head *rcu)); static inline void synchronize_rcu_expedited(void) { @@ -91,6 +92,7 @@ extern void rcu_restart_cpu(int cpu); extern long rcu_batches_completed(void); extern long rcu_batches_completed_bh(void); +extern long rcu_batches_completed_sched(void); static inline void rcu_init_sched(void) { diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index 510898a7bd6..7d777c9f394 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -159,7 +159,7 @@ static DEFINE_PER_CPU_SHARED_ALIGNED(struct rcu_dyntick_sched, rcu_dyntick_sched .dynticks = 1, }; -void rcu_qsctr_inc(int cpu) +void rcu_sched_qs(int cpu) { struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); @@ -967,12 +967,12 @@ void rcu_check_callbacks(int cpu, int user) * If this CPU took its interrupt from user mode or from the * idle loop, and this is not a nested interrupt, then * this CPU has to have exited all prior preept-disable - * sections of code. So increment the counter to note this. + * sections of code. So invoke rcu_sched_qs() to note this. * * The memory barrier is needed to handle the case where * writes from a preempt-disable section of code get reordered * into schedule() by this CPU's write buffer. So the memory - * barrier makes sure that the rcu_qsctr_inc() is seen by other + * barrier makes sure that the rcu_sched_qs() is seen by other * CPUs to happen after any such write. */ @@ -980,7 +980,7 @@ void rcu_check_callbacks(int cpu, int user) (idle_cpu(cpu) && !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) { smp_mb(); /* Guard against aggressive schedule(). */ - rcu_qsctr_inc(cpu); + rcu_sched_qs(cpu); } rcu_check_mb(cpu); diff --git a/kernel/rcutree.c b/kernel/rcutree.c index a162f859dd3..4d71d4e8b5a 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -74,26 +74,25 @@ EXPORT_SYMBOL_GPL(rcu_lock_map); .n_force_qs_ngp = 0, \ } -struct rcu_state rcu_state = RCU_STATE_INITIALIZER(rcu_state); -DEFINE_PER_CPU(struct rcu_data, rcu_data); +struct rcu_state rcu_sched_state = RCU_STATE_INITIALIZER(rcu_sched_state); +DEFINE_PER_CPU(struct rcu_data, rcu_sched_data); struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh_state); DEFINE_PER_CPU(struct rcu_data, rcu_bh_data); /* - * Increment the quiescent state counter. - * The counter is a bit degenerated: We do not need to know + * Note a quiescent state. Because we do not need to know * how many quiescent states passed, just if there was at least - * one since the start of the grace period. Thus just a flag. + * one since the start of the grace period, this just sets a flag. */ -void rcu_qsctr_inc(int cpu) +void rcu_sched_qs(int cpu) { - struct rcu_data *rdp = &per_cpu(rcu_data, cpu); + struct rcu_data *rdp = &per_cpu(rcu_sched_data, cpu); rdp->passed_quiesc = 1; rdp->passed_quiesc_completed = rdp->completed; } -void rcu_bh_qsctr_inc(int cpu) +void rcu_bh_qs(int cpu) { struct rcu_data *rdp = &per_cpu(rcu_bh_data, cpu); rdp->passed_quiesc = 1; @@ -113,12 +112,22 @@ static int qlowmark = 100; /* Once only this many pending, use blimit. */ static void force_quiescent_state(struct rcu_state *rsp, int relaxed); +/* + * Return the number of RCU-sched batches processed thus far for debug & stats. + */ +long rcu_batches_completed_sched(void) +{ + return rcu_sched_state.completed; +} +EXPORT_SYMBOL_GPL(rcu_batches_completed_sched); + /* * Return the number of RCU batches processed thus far for debug & stats. + * @@@ placeholder, maps to rcu_batches_completed_sched(). */ long rcu_batches_completed(void) { - return rcu_state.completed; + return rcu_batches_completed_sched(); } EXPORT_SYMBOL_GPL(rcu_batches_completed); @@ -310,7 +319,7 @@ void rcu_irq_exit(void) WARN_ON_RATELIMIT(rdtp->dynticks & 0x1, &rcu_rs); /* If the interrupt queued a callback, get out of dyntick mode. */ - if (__get_cpu_var(rcu_data).nxtlist || + if (__get_cpu_var(rcu_sched_data).nxtlist || __get_cpu_var(rcu_bh_data).nxtlist) set_need_resched(); } @@ -847,7 +856,7 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp) /* * Move callbacks from the outgoing CPU to the running CPU. * Note that the outgoing CPU is now quiscent, so it is now - * (uncharacteristically) safe to access it rcu_data structure. + * (uncharacteristically) safe to access its rcu_data structure. * Note also that we must carefully retain the order of the * outgoing CPU's callbacks in order for rcu_barrier() to work * correctly. Finally, note that we start all the callbacks @@ -878,7 +887,7 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp) */ static void rcu_offline_cpu(int cpu) { - __rcu_offline_cpu(cpu, &rcu_state); + __rcu_offline_cpu(cpu, &rcu_sched_state); __rcu_offline_cpu(cpu, &rcu_bh_state); } @@ -973,17 +982,16 @@ void rcu_check_callbacks(int cpu, int user) * Get here if this CPU took its interrupt from user * mode or from the idle loop, and if this is not a * nested interrupt. In this case, the CPU is in - * a quiescent state, so count it. + * a quiescent state, so note it. * * No memory barrier is required here because both - * rcu_qsctr_inc() and rcu_bh_qsctr_inc() reference - * only CPU-local variables that other CPUs neither - * access nor modify, at least not while the corresponding - * CPU is online. + * rcu_sched_qs() and rcu_bh_qs() reference only CPU-local + * variables that other CPUs neither access nor modify, + * at least not while the corresponding CPU is online. */ - rcu_qsctr_inc(cpu); - rcu_bh_qsctr_inc(cpu); + rcu_sched_qs(cpu); + rcu_bh_qs(cpu); } else if (!in_softirq()) { @@ -991,10 +999,10 @@ void rcu_check_callbacks(int cpu, int user) * Get here if this CPU did not take its interrupt from * softirq, in other words, if it is not interrupting * a rcu_bh read-side critical section. This is an _bh - * critical section, so count it. + * critical section, so note it. */ - rcu_bh_qsctr_inc(cpu); + rcu_bh_qs(cpu); } raise_softirq(RCU_SOFTIRQ); } @@ -1174,7 +1182,8 @@ static void rcu_process_callbacks(struct softirq_action *unused) */ smp_mb(); /* See above block comment. */ - __rcu_process_callbacks(&rcu_state, &__get_cpu_var(rcu_data)); + __rcu_process_callbacks(&rcu_sched_state, + &__get_cpu_var(rcu_sched_data)); __rcu_process_callbacks(&rcu_bh_state, &__get_cpu_var(rcu_bh_data)); /* @@ -1231,14 +1240,25 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), } /* - * Queue an RCU callback for invocation after a grace period. + * Queue an RCU-sched callback for invocation after a grace period. + */ +void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) +{ + __call_rcu(head, func, &rcu_sched_state); +} +EXPORT_SYMBOL_GPL(call_rcu_sched); + +/* + * @@@ Queue an RCU callback for invocation after a grace period. + * @@@ Placeholder pending rcutree_plugin.h. */ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) { - __call_rcu(head, func, &rcu_state); + call_rcu_sched(head, func); } EXPORT_SYMBOL_GPL(call_rcu); + /* * Queue an RCU for invocation after a quicker grace period. */ @@ -1311,7 +1331,7 @@ static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp) */ int rcu_pending(int cpu) { - return __rcu_pending(&rcu_state, &per_cpu(rcu_data, cpu)) || + return __rcu_pending(&rcu_sched_state, &per_cpu(rcu_sched_data, cpu)) || __rcu_pending(&rcu_bh_state, &per_cpu(rcu_bh_data, cpu)); } @@ -1324,7 +1344,7 @@ int rcu_pending(int cpu) int rcu_needs_cpu(int cpu) { /* RCU callbacks either ready or pending? */ - return per_cpu(rcu_data, cpu).nxtlist || + return per_cpu(rcu_sched_data, cpu).nxtlist || per_cpu(rcu_bh_data, cpu).nxtlist; } @@ -1418,7 +1438,7 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp) static void __cpuinit rcu_online_cpu(int cpu) { - rcu_init_percpu_data(cpu, &rcu_state); + rcu_init_percpu_data(cpu, &rcu_sched_state); rcu_init_percpu_data(cpu, &rcu_bh_state); } @@ -1545,10 +1565,10 @@ void __init __rcu_init(void) #ifdef CONFIG_RCU_CPU_STALL_DETECTOR printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n"); #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ - rcu_init_one(&rcu_state); - RCU_DATA_PTR_INIT(&rcu_state, rcu_data); + rcu_init_one(&rcu_sched_state); + RCU_DATA_PTR_INIT(&rcu_sched_state, rcu_sched_data); for_each_possible_cpu(i) - rcu_boot_init_percpu_data(i, &rcu_state); + rcu_boot_init_percpu_data(i, &rcu_sched_state); rcu_init_one(&rcu_bh_state); RCU_DATA_PTR_INIT(&rcu_bh_state, rcu_bh_data); for_each_possible_cpu(i) diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 7cc830a1c44..0024e5ddcc6 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -238,8 +238,8 @@ struct rcu_state { /* * RCU implementation internal declarations: */ -extern struct rcu_state rcu_state; -DECLARE_PER_CPU(struct rcu_data, rcu_data); +extern struct rcu_state rcu_sched_state; +DECLARE_PER_CPU(struct rcu_data, rcu_sched_data); extern struct rcu_state rcu_bh_state; DECLARE_PER_CPU(struct rcu_data, rcu_bh_data); diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c index 0cb52b88775..236c0504fee 100644 --- a/kernel/rcutree_trace.c +++ b/kernel/rcutree_trace.c @@ -77,8 +77,8 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp) static int show_rcudata(struct seq_file *m, void *unused) { - seq_puts(m, "rcu:\n"); - PRINT_RCU_DATA(rcu_data, print_one_rcu_data, m); + seq_puts(m, "rcu_sched:\n"); + PRINT_RCU_DATA(rcu_sched_data, print_one_rcu_data, m); seq_puts(m, "rcu_bh:\n"); PRINT_RCU_DATA(rcu_bh_data, print_one_rcu_data, m); return 0; @@ -125,8 +125,8 @@ static int show_rcudata_csv(struct seq_file *m, void *unused) seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\","); #endif /* #ifdef CONFIG_NO_HZ */ seq_puts(m, "\"of\",\"ri\",\"ql\",\"b\"\n"); - seq_puts(m, "\"rcu:\"\n"); - PRINT_RCU_DATA(rcu_data, print_one_rcu_data_csv, m); + seq_puts(m, "\"rcu_sched:\"\n"); + PRINT_RCU_DATA(rcu_sched_data, print_one_rcu_data_csv, m); seq_puts(m, "\"rcu_bh:\"\n"); PRINT_RCU_DATA(rcu_bh_data, print_one_rcu_data_csv, m); return 0; @@ -172,8 +172,8 @@ static void print_one_rcu_state(struct seq_file *m, struct rcu_state *rsp) static int show_rcuhier(struct seq_file *m, void *unused) { - seq_puts(m, "rcu:\n"); - print_one_rcu_state(m, &rcu_state); + seq_puts(m, "rcu_sched:\n"); + print_one_rcu_state(m, &rcu_sched_state); seq_puts(m, "rcu_bh:\n"); print_one_rcu_state(m, &rcu_bh_state); return 0; @@ -194,8 +194,8 @@ static struct file_operations rcuhier_fops = { static int show_rcugp(struct seq_file *m, void *unused) { - seq_printf(m, "rcu: completed=%ld gpnum=%ld\n", - rcu_state.completed, rcu_state.gpnum); + seq_printf(m, "rcu_sched: completed=%ld gpnum=%ld\n", + rcu_sched_state.completed, rcu_sched_state.gpnum); seq_printf(m, "rcu_bh: completed=%ld gpnum=%ld\n", rcu_bh_state.completed, rcu_bh_state.gpnum); return 0; @@ -244,8 +244,8 @@ static void print_rcu_pendings(struct seq_file *m, struct rcu_state *rsp) static int show_rcu_pending(struct seq_file *m, void *unused) { - seq_puts(m, "rcu:\n"); - print_rcu_pendings(m, &rcu_state); + seq_puts(m, "rcu_sched:\n"); + print_rcu_pendings(m, &rcu_sched_state); seq_puts(m, "rcu_bh:\n"); print_rcu_pendings(m, &rcu_bh_state); return 0; diff --git a/kernel/sched.c b/kernel/sched.c index cda8b81f880..c9beca67a53 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5325,7 +5325,7 @@ need_resched: preempt_disable(); cpu = smp_processor_id(); rq = cpu_rq(cpu); - rcu_qsctr_inc(cpu); + rcu_sched_qs(cpu); prev = rq->curr; switch_count = &prev->nivcsw; diff --git a/kernel/softirq.c b/kernel/softirq.c index eb5e131a048..7db25067cd2 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -227,7 +227,7 @@ restart: preempt_count() = prev_count; } - rcu_bh_qsctr_inc(cpu); + rcu_bh_qs(cpu); } h++; pending >>= 1; @@ -721,7 +721,7 @@ static int ksoftirqd(void * __bind_cpu) preempt_enable_no_resched(); cond_resched(); preempt_disable(); - rcu_qsctr_inc((long)__bind_cpu); + rcu_sched_qs((long)__bind_cpu); } preempt_enable(); set_current_state(TASK_INTERRUPTIBLE); -- cgit v1.2.3-70-g09d2 From 6b3ef48adf847f7adf11c870e3ffacac150f1564 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sat, 22 Aug 2009 13:56:53 -0700 Subject: rcu: Remove CONFIG_PREEMPT_RCU Now that CONFIG_TREE_PREEMPT_RCU is in place, there is no further need for CONFIG_PREEMPT_RCU. Remove it, along with whatever subtle bugs it may (or may not) contain. Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <125097461396-git-send-email-> Signed-off-by: Ingo Molnar --- Documentation/RCU/rcu.txt | 10 +- Documentation/RCU/whatisRCU.txt | 8 +- include/linux/init_task.h | 6 +- include/linux/rcupdate.h | 4 +- include/linux/rcupreempt.h | 140 ---- include/linux/rcupreempt_trace.h | 97 --- include/linux/sched.h | 13 - init/Kconfig | 20 +- kernel/Makefile | 2 - kernel/rcupreempt.c | 1518 -------------------------------------- kernel/rcupreempt_trace.c | 335 --------- lib/Kconfig.debug | 2 +- 12 files changed, 13 insertions(+), 2142 deletions(-) delete mode 100644 include/linux/rcupreempt.h delete mode 100644 include/linux/rcupreempt_trace.h delete mode 100644 kernel/rcupreempt.c delete mode 100644 kernel/rcupreempt_trace.c (limited to 'Documentation') diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt index 7aa2002ade7..2a23523ce47 100644 --- a/Documentation/RCU/rcu.txt +++ b/Documentation/RCU/rcu.txt @@ -36,7 +36,7 @@ o How can the updater tell when a grace period has completed executed in user mode, or executed in the idle loop, we can safely free up that item. - Preemptible variants of RCU (CONFIG_PREEMPT_RCU) get the + Preemptible variants of RCU (CONFIG_TREE_PREEMPT_RCU) get the same effect, but require that the readers manipulate CPU-local counters. These counters allow limited types of blocking within RCU read-side critical sections. SRCU also uses @@ -79,10 +79,10 @@ o I hear that RCU is patented? What is with that? o I hear that RCU needs work in order to support realtime kernels? This work is largely completed. Realtime-friendly RCU can be - enabled via the CONFIG_PREEMPT_RCU kernel configuration parameter. - However, work is in progress for enabling priority boosting of - preempted RCU read-side critical sections. This is needed if you - have CPU-bound realtime threads. + enabled via the CONFIG_TREE_PREEMPT_RCU kernel configuration + parameter. However, work is in progress for enabling priority + boosting of preempted RCU read-side critical sections. This is + needed if you have CPU-bound realtime threads. o Where can I find more information on RCU? diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 97ded2432c5..e41a7fecf0d 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -136,10 +136,10 @@ rcu_read_lock() Used by a reader to inform the reclaimer that the reader is entering an RCU read-side critical section. It is illegal to block while in an RCU read-side critical section, though - kernels built with CONFIG_PREEMPT_RCU can preempt RCU read-side - critical sections. Any RCU-protected data structure accessed - during an RCU read-side critical section is guaranteed to remain - unreclaimed for the full duration of that critical section. + kernels built with CONFIG_TREE_PREEMPT_RCU can preempt RCU + read-side critical sections. Any RCU-protected data structure + accessed during an RCU read-side critical section is guaranteed to + remain unreclaimed for the full duration of that critical section. Reference counts may be used in conjunction with RCU to maintain longer-term references to data structures. diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 971a968831b..79d4baee31b 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -94,11 +94,7 @@ extern struct group_info init_groups; # define CAP_INIT_BSET CAP_INIT_EFF_SET #endif -#ifdef CONFIG_PREEMPT_RCU -#define INIT_TASK_RCU_PREEMPT(tsk) \ - .rcu_read_lock_nesting = 0, \ - .rcu_flipctr_idx = 0, -#elif defined(CONFIG_TREE_PREEMPT_RCU) +#ifdef CONFIG_TREE_PREEMPT_RCU #define INIT_TASK_RCU_PREEMPT(tsk) \ .rcu_read_lock_nesting = 0, \ .rcu_read_unlock_special = 0, \ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 26892f5e7bd..ec90fc34fea 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -68,11 +68,9 @@ extern int rcu_scheduler_active; #if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) #include -#elif defined(CONFIG_PREEMPT_RCU) -#include #else #error "Unknown RCU implementation specified to kernel configuration" -#endif /* #else #if defined(CONFIG_CLASSIC_RCU) */ +#endif #define RCU_HEAD_INIT { .next = NULL, .func = NULL } #define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h deleted file mode 100644 index a42ab88e921..00000000000 --- a/include/linux/rcupreempt.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Read-Copy Update mechanism for mutual exclusion (RT implementation) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2006 - * - * Author: Paul McKenney - * - * Based on the original work by Paul McKenney - * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen. - * Papers: - * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf - * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001) - * - * For detailed explanation of Read-Copy Update mechanism see - - * Documentation/RCU - * - */ - -#ifndef __LINUX_RCUPREEMPT_H -#define __LINUX_RCUPREEMPT_H - -#include -#include -#include -#include -#include -#include - -extern void rcu_sched_qs(int cpu); -static inline void rcu_bh_qs(int cpu) { } - -/* - * Someone might want to pass call_rcu_bh as a function pointer. - * So this needs to just be a rename and not a macro function. - * (no parentheses) - */ -#define call_rcu_bh call_rcu - -/** - * call_rcu_sched - Queue RCU callback for invocation after sched grace period. - * @head: structure to be used for queueing the RCU updates. - * @func: actual update function to be invoked after the grace period - * - * The update function will be invoked some time after a full - * synchronize_sched()-style grace period elapses, in other words after - * all currently executing preempt-disabled sections of code (including - * hardirq handlers, NMI handlers, and local_irq_save() blocks) have - * completed. - */ -extern void call_rcu_sched(struct rcu_head *head, - void (*func)(struct rcu_head *head)); - -extern void __rcu_read_lock(void); -extern void __rcu_read_unlock(void); -extern int rcu_needs_cpu(int cpu); - -#define __rcu_read_lock_bh() { rcu_read_lock(); local_bh_disable(); } -#define __rcu_read_unlock_bh() { local_bh_enable(); rcu_read_unlock(); } - -extern void __synchronize_sched(void); - -static inline void synchronize_rcu_expedited(void) -{ - synchronize_rcu(); /* Placeholder for new rcupreempt implementation. */ -} - -static inline void synchronize_rcu_bh_expedited(void) -{ - synchronize_rcu_bh(); /* Placeholder for new rcupreempt impl. */ -} - -extern void __rcu_init(void); -extern void rcu_init_sched(void); -extern void rcu_check_callbacks(int cpu, int user); -extern void rcu_restart_cpu(int cpu); -extern long rcu_batches_completed(void); - -/* - * Return the number of RCU batches processed thus far. Useful for debug - * and statistic. The _bh variant is identifcal to straight RCU - */ -static inline long rcu_batches_completed_bh(void) -{ - return rcu_batches_completed(); -} - -static inline void exit_rcu(void) -{ -} - -#ifdef CONFIG_RCU_TRACE -struct rcupreempt_trace; -extern long *rcupreempt_flipctr(int cpu); -extern long rcupreempt_data_completed(void); -extern int rcupreempt_flip_flag(int cpu); -extern int rcupreempt_mb_flag(int cpu); -extern char *rcupreempt_try_flip_state_name(void); -extern struct rcupreempt_trace *rcupreempt_trace_cpu(int cpu); -#endif - -struct softirq_action; - -#ifdef CONFIG_NO_HZ -extern void rcu_enter_nohz(void); -extern void rcu_exit_nohz(void); -#else -# define rcu_enter_nohz() do { } while (0) -# define rcu_exit_nohz() do { } while (0) -#endif - -/* - * A context switch is a grace period for rcupreempt synchronize_rcu() - * only during early boot, before the scheduler has been initialized. - * So, how the heck do we get a context switch? Well, if the caller - * invokes synchronize_rcu(), they are willing to accept a context - * switch, so we simply pretend that one happened. - * - * After boot, there might be a blocked or preempted task in an RCU - * read-side critical section, so we cannot then take the fastpath. - */ -static inline int rcu_blocking_is_gp(void) -{ - return num_online_cpus() == 1 && !rcu_scheduler_active; -} - -#endif /* __LINUX_RCUPREEMPT_H */ diff --git a/include/linux/rcupreempt_trace.h b/include/linux/rcupreempt_trace.h deleted file mode 100644 index b99ae073192..00000000000 --- a/include/linux/rcupreempt_trace.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Read-Copy Update mechanism for mutual exclusion (RT implementation) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2006 - * - * Author: Paul McKenney - * - * Based on the original work by Paul McKenney - * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen. - * Papers: - * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf - * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001) - * - * For detailed explanation of the Preemptible Read-Copy Update mechanism see - - * http://lwn.net/Articles/253651/ - */ - -#ifndef __LINUX_RCUPREEMPT_TRACE_H -#define __LINUX_RCUPREEMPT_TRACE_H - -#include -#include - -#include - -/* - * PREEMPT_RCU data structures. - */ - -struct rcupreempt_trace { - long next_length; - long next_add; - long wait_length; - long wait_add; - long done_length; - long done_add; - long done_remove; - atomic_t done_invoked; - long rcu_check_callbacks; - atomic_t rcu_try_flip_1; - atomic_t rcu_try_flip_e1; - long rcu_try_flip_i1; - long rcu_try_flip_ie1; - long rcu_try_flip_g1; - long rcu_try_flip_a1; - long rcu_try_flip_ae1; - long rcu_try_flip_a2; - long rcu_try_flip_z1; - long rcu_try_flip_ze1; - long rcu_try_flip_z2; - long rcu_try_flip_m1; - long rcu_try_flip_me1; - long rcu_try_flip_m2; -}; - -#ifdef CONFIG_RCU_TRACE -#define RCU_TRACE(fn, arg) fn(arg); -#else -#define RCU_TRACE(fn, arg) -#endif - -extern void rcupreempt_trace_move2done(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_move2wait(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_1(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_e1(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_i1(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_ie1(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_g1(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_a1(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_ae1(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_a2(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_z1(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_ze1(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_z2(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_m1(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_me1(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_try_flip_m2(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_check_callbacks(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_done_remove(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_invoke(struct rcupreempt_trace *trace); -extern void rcupreempt_trace_next_add(struct rcupreempt_trace *trace); - -#endif /* __LINUX_RCUPREEMPT_TRACE_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index d7f98f637a2..bfca26d63b1 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1205,11 +1205,6 @@ struct task_struct { unsigned int policy; cpumask_t cpus_allowed; -#ifdef CONFIG_PREEMPT_RCU - int rcu_read_lock_nesting; - int rcu_flipctr_idx; -#endif /* #ifdef CONFIG_PREEMPT_RCU */ - #ifdef CONFIG_TREE_PREEMPT_RCU int rcu_read_lock_nesting; char rcu_read_unlock_special; @@ -1744,14 +1739,6 @@ static inline void rcu_copy_process(struct task_struct *p) INIT_LIST_HEAD(&p->rcu_node_entry); } -#elif defined(CONFIG_PREEMPT_RCU) - -static inline void rcu_copy_process(struct task_struct *p) -{ - p->rcu_read_lock_nesting = 0; - p->rcu_flipctr_idx = 0; -} - #else static inline void rcu_copy_process(struct task_struct *p) diff --git a/init/Kconfig b/init/Kconfig index f88da2d1c1f..8e8b76d8a27 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -324,17 +324,6 @@ config TREE_RCU thousands of CPUs. It also scales down nicely to smaller systems. -config PREEMPT_RCU - bool "Preemptible RCU" - depends on PREEMPT - help - This option reduces the latency of the kernel by making certain - RCU sections preemptible. Normally RCU code is non-preemptible, if - this option is selected then read-only RCU sections become - preemptible. This helps latency, but may expose bugs due to - now-naive assumptions about each RCU read-side critical section - remaining on a given CPU through its execution. - config TREE_PREEMPT_RCU bool "Preemptable tree-based hierarchical RCU" depends on PREEMPT @@ -348,7 +337,7 @@ endchoice config RCU_TRACE bool "Enable tracing for RCU" - depends on TREE_RCU || PREEMPT_RCU || TREE_PREEMPT_RCU + depends on TREE_RCU || TREE_PREEMPT_RCU help This option provides tracing in RCU which presents stats in debugfs for debugging RCU implementation. @@ -395,13 +384,6 @@ config TREE_RCU_TRACE TREE_PREEMPT_RCU implementations, permitting Makefile to trivially select kernel/rcutree_trace.c. -config PREEMPT_RCU_TRACE - def_bool RCU_TRACE && PREEMPT_RCU - select DEBUG_FS - help - This option provides tracing for the PREEMPT_RCU implementation, - permitting Makefile to trivially select kernel/rcupreempt_trace.c. - endmenu # "RCU Subsystem" config IKCONFIG diff --git a/kernel/Makefile b/kernel/Makefile index 1a38b4789dd..b833bd5cc12 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -82,9 +82,7 @@ obj-$(CONFIG_SECCOMP) += seccomp.o obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o obj-$(CONFIG_TREE_RCU) += rcutree.o obj-$(CONFIG_TREE_PREEMPT_RCU) += rcutree.o -obj-$(CONFIG_PREEMPT_RCU) += rcupreempt.o obj-$(CONFIG_TREE_RCU_TRACE) += rcutree_trace.o -obj-$(CONFIG_PREEMPT_RCU_TRACE) += rcupreempt_trace.o obj-$(CONFIG_RELAY) += relay.o obj-$(CONFIG_SYSCTL) += utsname_sysctl.o obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c deleted file mode 100644 index 0053ce56e32..00000000000 --- a/kernel/rcupreempt.c +++ /dev/null @@ -1,1518 +0,0 @@ -/* - * Read-Copy Update mechanism for mutual exclusion, realtime implementation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright IBM Corporation, 2006 - * - * Authors: Paul E. McKenney - * With thanks to Esben Nielsen, Bill Huey, and Ingo Molnar - * for pushing me away from locks and towards counters, and - * to Suparna Bhattacharya for pushing me completely away - * from atomic instructions on the read side. - * - * - Added handling of Dynamic Ticks - * Copyright 2007 - Paul E. Mckenney - * - Steven Rostedt - * - * Papers: http://www.rdrop.com/users/paulmck/RCU - * - * Design Document: http://lwn.net/Articles/253651/ - * - * For detailed explanation of Read-Copy Update mechanism see - - * Documentation/RCU/ *.txt - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * PREEMPT_RCU data structures. - */ - -/* - * GP_STAGES specifies the number of times the state machine has - * to go through the all the rcu_try_flip_states (see below) - * in a single Grace Period. - * - * GP in GP_STAGES stands for Grace Period ;) - */ -#define GP_STAGES 2 -struct rcu_data { - spinlock_t lock; /* Protect rcu_data fields. */ - long completed; /* Number of last completed batch. */ - int waitlistcount; - struct rcu_head *nextlist; - struct rcu_head **nexttail; - struct rcu_head *waitlist[GP_STAGES]; - struct rcu_head **waittail[GP_STAGES]; - struct rcu_head *donelist; /* from waitlist & waitschedlist */ - struct rcu_head **donetail; - long rcu_flipctr[2]; - struct rcu_head *nextschedlist; - struct rcu_head **nextschedtail; - struct rcu_head *waitschedlist; - struct rcu_head **waitschedtail; - int rcu_sched_sleeping; -#ifdef CONFIG_RCU_TRACE - struct rcupreempt_trace trace; -#endif /* #ifdef CONFIG_RCU_TRACE */ -}; - -/* - * States for rcu_try_flip() and friends. - */ - -enum rcu_try_flip_states { - - /* - * Stay here if nothing is happening. Flip the counter if somthing - * starts happening. Denoted by "I" - */ - rcu_try_flip_idle_state, - - /* - * Wait here for all CPUs to notice that the counter has flipped. This - * prevents the old set of counters from ever being incremented once - * we leave this state, which in turn is necessary because we cannot - * test any individual counter for zero -- we can only check the sum. - * Denoted by "A". - */ - rcu_try_flip_waitack_state, - - /* - * Wait here for the sum of the old per-CPU counters to reach zero. - * Denoted by "Z". - */ - rcu_try_flip_waitzero_state, - - /* - * Wait here for each of the other CPUs to execute a memory barrier. - * This is necessary to ensure that these other CPUs really have - * completed executing their RCU read-side critical sections, despite - * their CPUs wildly reordering memory. Denoted by "M". - */ - rcu_try_flip_waitmb_state, -}; - -/* - * States for rcu_ctrlblk.rcu_sched_sleep. - */ - -enum rcu_sched_sleep_states { - rcu_sched_not_sleeping, /* Not sleeping, callbacks need GP. */ - rcu_sched_sleep_prep, /* Thinking of sleeping, rechecking. */ - rcu_sched_sleeping, /* Sleeping, awaken if GP needed. */ -}; - -struct rcu_ctrlblk { - spinlock_t fliplock; /* Protect state-machine transitions. */ - long completed; /* Number of last completed batch. */ - enum rcu_try_flip_states rcu_try_flip_state; /* The current state of - the rcu state machine */ - spinlock_t schedlock; /* Protect rcu_sched sleep state. */ - enum rcu_sched_sleep_states sched_sleep; /* rcu_sched state. */ - wait_queue_head_t sched_wq; /* Place for rcu_sched to sleep. */ -}; - -struct rcu_dyntick_sched { - int dynticks; - int dynticks_snap; - int sched_qs; - int sched_qs_snap; - int sched_dynticks_snap; -}; - -static DEFINE_PER_CPU_SHARED_ALIGNED(struct rcu_dyntick_sched, rcu_dyntick_sched) = { - .dynticks = 1, -}; - -static int rcu_pending(int cpu); - -void rcu_sched_qs(int cpu) -{ - struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - - rdssp->sched_qs++; -} - -#ifdef CONFIG_NO_HZ - -void rcu_enter_nohz(void) -{ - static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1); - - smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */ - __get_cpu_var(rcu_dyntick_sched).dynticks++; - WARN_ON_RATELIMIT(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1, &rs); -} - -void rcu_exit_nohz(void) -{ - static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1); - - __get_cpu_var(rcu_dyntick_sched).dynticks++; - smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */ - WARN_ON_RATELIMIT(!(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1), - &rs); -} - -#endif /* CONFIG_NO_HZ */ - - -static DEFINE_PER_CPU(struct rcu_data, rcu_data); - -static struct rcu_ctrlblk rcu_ctrlblk = { - .fliplock = __SPIN_LOCK_UNLOCKED(rcu_ctrlblk.fliplock), - .completed = 0, - .rcu_try_flip_state = rcu_try_flip_idle_state, - .schedlock = __SPIN_LOCK_UNLOCKED(rcu_ctrlblk.schedlock), - .sched_sleep = rcu_sched_not_sleeping, - .sched_wq = __WAIT_QUEUE_HEAD_INITIALIZER(rcu_ctrlblk.sched_wq), -}; - -static struct task_struct *rcu_sched_grace_period_task; - -#ifdef CONFIG_RCU_TRACE -static char *rcu_try_flip_state_names[] = - { "idle", "waitack", "waitzero", "waitmb" }; -#endif /* #ifdef CONFIG_RCU_TRACE */ - -static DECLARE_BITMAP(rcu_cpu_online_map, NR_CPUS) __read_mostly - = CPU_BITS_NONE; - -/* - * Enum and per-CPU flag to determine when each CPU has seen - * the most recent counter flip. - */ - -enum rcu_flip_flag_values { - rcu_flip_seen, /* Steady/initial state, last flip seen. */ - /* Only GP detector can update. */ - rcu_flipped /* Flip just completed, need confirmation. */ - /* Only corresponding CPU can update. */ -}; -static DEFINE_PER_CPU_SHARED_ALIGNED(enum rcu_flip_flag_values, rcu_flip_flag) - = rcu_flip_seen; - -/* - * Enum and per-CPU flag to determine when each CPU has executed the - * needed memory barrier to fence in memory references from its last RCU - * read-side critical section in the just-completed grace period. - */ - -enum rcu_mb_flag_values { - rcu_mb_done, /* Steady/initial state, no mb()s required. */ - /* Only GP detector can update. */ - rcu_mb_needed /* Flip just completed, need an mb(). */ - /* Only corresponding CPU can update. */ -}; -static DEFINE_PER_CPU_SHARED_ALIGNED(enum rcu_mb_flag_values, rcu_mb_flag) - = rcu_mb_done; - -/* - * RCU_DATA_ME: find the current CPU's rcu_data structure. - * RCU_DATA_CPU: find the specified CPU's rcu_data structure. - */ -#define RCU_DATA_ME() (&__get_cpu_var(rcu_data)) -#define RCU_DATA_CPU(cpu) (&per_cpu(rcu_data, cpu)) - -/* - * Helper macro for tracing when the appropriate rcu_data is not - * cached in a local variable, but where the CPU number is so cached. - */ -#define RCU_TRACE_CPU(f, cpu) RCU_TRACE(f, &(RCU_DATA_CPU(cpu)->trace)); - -/* - * Helper macro for tracing when the appropriate rcu_data is not - * cached in a local variable. - */ -#define RCU_TRACE_ME(f) RCU_TRACE(f, &(RCU_DATA_ME()->trace)); - -/* - * Helper macro for tracing when the appropriate rcu_data is pointed - * to by a local variable. - */ -#define RCU_TRACE_RDP(f, rdp) RCU_TRACE(f, &((rdp)->trace)); - -#define RCU_SCHED_BATCH_TIME (HZ / 50) - -/* - * Return the number of RCU batches processed thus far. Useful - * for debug and statistics. - */ -long rcu_batches_completed(void) -{ - return rcu_ctrlblk.completed; -} -EXPORT_SYMBOL_GPL(rcu_batches_completed); - -void __rcu_read_lock(void) -{ - int idx; - struct task_struct *t = current; - int nesting; - - nesting = ACCESS_ONCE(t->rcu_read_lock_nesting); - if (nesting != 0) { - - /* An earlier rcu_read_lock() covers us, just count it. */ - - t->rcu_read_lock_nesting = nesting + 1; - - } else { - unsigned long flags; - - /* - * We disable interrupts for the following reasons: - * - If we get scheduling clock interrupt here, and we - * end up acking the counter flip, it's like a promise - * that we will never increment the old counter again. - * Thus we will break that promise if that - * scheduling clock interrupt happens between the time - * we pick the .completed field and the time that we - * increment our counter. - * - * - We don't want to be preempted out here. - * - * NMIs can still occur, of course, and might themselves - * contain rcu_read_lock(). - */ - - local_irq_save(flags); - - /* - * Outermost nesting of rcu_read_lock(), so increment - * the current counter for the current CPU. Use volatile - * casts to prevent the compiler from reordering. - */ - - idx = ACCESS_ONCE(rcu_ctrlblk.completed) & 0x1; - ACCESS_ONCE(RCU_DATA_ME()->rcu_flipctr[idx])++; - - /* - * Now that the per-CPU counter has been incremented, we - * are protected from races with rcu_read_lock() invoked - * from NMI handlers on this CPU. We can therefore safely - * increment the nesting counter, relieving further NMIs - * of the need to increment the per-CPU counter. - */ - - ACCESS_ONCE(t->rcu_read_lock_nesting) = nesting + 1; - - /* - * Now that we have preventing any NMIs from storing - * to the ->rcu_flipctr_idx, we can safely use it to - * remember which counter to decrement in the matching - * rcu_read_unlock(). - */ - - ACCESS_ONCE(t->rcu_flipctr_idx) = idx; - local_irq_restore(flags); - } -} -EXPORT_SYMBOL_GPL(__rcu_read_lock); - -void __rcu_read_unlock(void) -{ - int idx; - struct task_struct *t = current; - int nesting; - - nesting = ACCESS_ONCE(t->rcu_read_lock_nesting); - if (nesting > 1) { - - /* - * We are still protected by the enclosing rcu_read_lock(), - * so simply decrement the counter. - */ - - t->rcu_read_lock_nesting = nesting - 1; - - } else { - unsigned long flags; - - /* - * Disable local interrupts to prevent the grace-period - * detection state machine from seeing us half-done. - * NMIs can still occur, of course, and might themselves - * contain rcu_read_lock() and rcu_read_unlock(). - */ - - local_irq_save(flags); - - /* - * Outermost nesting of rcu_read_unlock(), so we must - * decrement the current counter for the current CPU. - * This must be done carefully, because NMIs can - * occur at any point in this code, and any rcu_read_lock() - * and rcu_read_unlock() pairs in the NMI handlers - * must interact non-destructively with this code. - * Lots of volatile casts, and -very- careful ordering. - * - * Changes to this code, including this one, must be - * inspected, validated, and tested extremely carefully!!! - */ - - /* - * First, pick up the index. - */ - - idx = ACCESS_ONCE(t->rcu_flipctr_idx); - - /* - * Now that we have fetched the counter index, it is - * safe to decrement the per-task RCU nesting counter. - * After this, any interrupts or NMIs will increment and - * decrement the per-CPU counters. - */ - ACCESS_ONCE(t->rcu_read_lock_nesting) = nesting - 1; - - /* - * It is now safe to decrement this task's nesting count. - * NMIs that occur after this statement will route their - * rcu_read_lock() calls through this "else" clause, and - * will thus start incrementing the per-CPU counter on - * their own. They will also clobber ->rcu_flipctr_idx, - * but that is OK, since we have already fetched it. - */ - - ACCESS_ONCE(RCU_DATA_ME()->rcu_flipctr[idx])--; - local_irq_restore(flags); - } -} -EXPORT_SYMBOL_GPL(__rcu_read_unlock); - -/* - * If a global counter flip has occurred since the last time that we - * advanced callbacks, advance them. Hardware interrupts must be - * disabled when calling this function. - */ -static void __rcu_advance_callbacks(struct rcu_data *rdp) -{ - int cpu; - int i; - int wlc = 0; - - if (rdp->completed != rcu_ctrlblk.completed) { - if (rdp->waitlist[GP_STAGES - 1] != NULL) { - *rdp->donetail = rdp->waitlist[GP_STAGES - 1]; - rdp->donetail = rdp->waittail[GP_STAGES - 1]; - RCU_TRACE_RDP(rcupreempt_trace_move2done, rdp); - } - for (i = GP_STAGES - 2; i >= 0; i--) { - if (rdp->waitlist[i] != NULL) { - rdp->waitlist[i + 1] = rdp->waitlist[i]; - rdp->waittail[i + 1] = rdp->waittail[i]; - wlc++; - } else { - rdp->waitlist[i + 1] = NULL; - rdp->waittail[i + 1] = - &rdp->waitlist[i + 1]; - } - } - if (rdp->nextlist != NULL) { - rdp->waitlist[0] = rdp->nextlist; - rdp->waittail[0] = rdp->nexttail; - wlc++; - rdp->nextlist = NULL; - rdp->nexttail = &rdp->nextlist; - RCU_TRACE_RDP(rcupreempt_trace_move2wait, rdp); - } else { - rdp->waitlist[0] = NULL; - rdp->waittail[0] = &rdp->waitlist[0]; - } - rdp->waitlistcount = wlc; - rdp->completed = rcu_ctrlblk.completed; - } - - /* - * Check to see if this CPU needs to report that it has seen - * the most recent counter flip, thereby declaring that all - * subsequent rcu_read_lock() invocations will respect this flip. - */ - - cpu = raw_smp_processor_id(); - if (per_cpu(rcu_flip_flag, cpu) == rcu_flipped) { - smp_mb(); /* Subsequent counter accesses must see new value */ - per_cpu(rcu_flip_flag, cpu) = rcu_flip_seen; - smp_mb(); /* Subsequent RCU read-side critical sections */ - /* seen -after- acknowledgement. */ - } -} - -#ifdef CONFIG_NO_HZ -static DEFINE_PER_CPU(int, rcu_update_flag); - -/** - * rcu_irq_enter - Called from Hard irq handlers and NMI/SMI. - * - * If the CPU was idle with dynamic ticks active, this updates the - * rcu_dyntick_sched.dynticks to let the RCU handling know that the - * CPU is active. - */ -void rcu_irq_enter(void) -{ - int cpu = smp_processor_id(); - struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - - if (per_cpu(rcu_update_flag, cpu)) - per_cpu(rcu_update_flag, cpu)++; - - /* - * Only update if we are coming from a stopped ticks mode - * (rcu_dyntick_sched.dynticks is even). - */ - if (!in_interrupt() && - (rdssp->dynticks & 0x1) == 0) { - /* - * The following might seem like we could have a race - * with NMI/SMIs. But this really isn't a problem. - * Here we do a read/modify/write, and the race happens - * when an NMI/SMI comes in after the read and before - * the write. But NMI/SMIs will increment this counter - * twice before returning, so the zero bit will not - * be corrupted by the NMI/SMI which is the most important - * part. - * - * The only thing is that we would bring back the counter - * to a postion that it was in during the NMI/SMI. - * But the zero bit would be set, so the rest of the - * counter would again be ignored. - * - * On return from the IRQ, the counter may have the zero - * bit be 0 and the counter the same as the return from - * the NMI/SMI. If the state machine was so unlucky to - * see that, it still doesn't matter, since all - * RCU read-side critical sections on this CPU would - * have already completed. - */ - rdssp->dynticks++; - /* - * The following memory barrier ensures that any - * rcu_read_lock() primitives in the irq handler - * are seen by other CPUs to follow the above - * increment to rcu_dyntick_sched.dynticks. This is - * required in order for other CPUs to correctly - * determine when it is safe to advance the RCU - * grace-period state machine. - */ - smp_mb(); /* see above block comment. */ - /* - * Since we can't determine the dynamic tick mode from - * the rcu_dyntick_sched.dynticks after this routine, - * we use a second flag to acknowledge that we came - * from an idle state with ticks stopped. - */ - per_cpu(rcu_update_flag, cpu)++; - /* - * If we take an NMI/SMI now, they will also increment - * the rcu_update_flag, and will not update the - * rcu_dyntick_sched.dynticks on exit. That is for - * this IRQ to do. - */ - } -} - -/** - * rcu_irq_exit - Called from exiting Hard irq context. - * - * If the CPU was idle with dynamic ticks active, update the - * rcu_dyntick_sched.dynticks to let the RCU handling be - * aware that the CPU is going back to idle with no ticks. - */ -void rcu_irq_exit(void) -{ - int cpu = smp_processor_id(); - struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - - /* - * rcu_update_flag is set if we interrupted the CPU - * when it was idle with ticks stopped. - * Once this occurs, we keep track of interrupt nesting - * because a NMI/SMI could also come in, and we still - * only want the IRQ that started the increment of the - * rcu_dyntick_sched.dynticks to be the one that modifies - * it on exit. - */ - if (per_cpu(rcu_update_flag, cpu)) { - if (--per_cpu(rcu_update_flag, cpu)) - return; - - /* This must match the interrupt nesting */ - WARN_ON(in_interrupt()); - - /* - * If an NMI/SMI happens now we are still - * protected by the rcu_dyntick_sched.dynticks being odd. - */ - - /* - * The following memory barrier ensures that any - * rcu_read_unlock() primitives in the irq handler - * are seen by other CPUs to preceed the following - * increment to rcu_dyntick_sched.dynticks. This - * is required in order for other CPUs to determine - * when it is safe to advance the RCU grace-period - * state machine. - */ - smp_mb(); /* see above block comment. */ - rdssp->dynticks++; - WARN_ON(rdssp->dynticks & 0x1); - } -} - -void rcu_nmi_enter(void) -{ - rcu_irq_enter(); -} - -void rcu_nmi_exit(void) -{ - rcu_irq_exit(); -} - -static void dyntick_save_progress_counter(int cpu) -{ - struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - - rdssp->dynticks_snap = rdssp->dynticks; -} - -static inline int -rcu_try_flip_waitack_needed(int cpu) -{ - long curr; - long snap; - struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - - curr = rdssp->dynticks; - snap = rdssp->dynticks_snap; - smp_mb(); /* force ordering with cpu entering/leaving dynticks. */ - - /* - * If the CPU remained in dynticks mode for the entire time - * and didn't take any interrupts, NMIs, SMIs, or whatever, - * then it cannot be in the middle of an rcu_read_lock(), so - * the next rcu_read_lock() it executes must use the new value - * of the counter. So we can safely pretend that this CPU - * already acknowledged the counter. - */ - - if ((curr == snap) && ((curr & 0x1) == 0)) - return 0; - - /* - * If the CPU passed through or entered a dynticks idle phase with - * no active irq handlers, then, as above, we can safely pretend - * that this CPU already acknowledged the counter. - */ - - if ((curr - snap) > 2 || (curr & 0x1) == 0) - return 0; - - /* We need this CPU to explicitly acknowledge the counter flip. */ - - return 1; -} - -static inline int -rcu_try_flip_waitmb_needed(int cpu) -{ - long curr; - long snap; - struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - - curr = rdssp->dynticks; - snap = rdssp->dynticks_snap; - smp_mb(); /* force ordering with cpu entering/leaving dynticks. */ - - /* - * If the CPU remained in dynticks mode for the entire time - * and didn't take any interrupts, NMIs, SMIs, or whatever, - * then it cannot have executed an RCU read-side critical section - * during that time, so there is no need for it to execute a - * memory barrier. - */ - - if ((curr == snap) && ((curr & 0x1) == 0)) - return 0; - - /* - * If the CPU either entered or exited an outermost interrupt, - * SMI, NMI, or whatever handler, then we know that it executed - * a memory barrier when doing so. So we don't need another one. - */ - if (curr != snap) - return 0; - - /* We need the CPU to execute a memory barrier. */ - - return 1; -} - -static void dyntick_save_progress_counter_sched(int cpu) -{ - struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - - rdssp->sched_dynticks_snap = rdssp->dynticks; -} - -static int rcu_qsctr_inc_needed_dyntick(int cpu) -{ - long curr; - long snap; - struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - - curr = rdssp->dynticks; - snap = rdssp->sched_dynticks_snap; - smp_mb(); /* force ordering with cpu entering/leaving dynticks. */ - - /* - * If the CPU remained in dynticks mode for the entire time - * and didn't take any interrupts, NMIs, SMIs, or whatever, - * then it cannot be in the middle of an rcu_read_lock(), so - * the next rcu_read_lock() it executes must use the new value - * of the counter. Therefore, this CPU has been in a quiescent - * state the entire time, and we don't need to wait for it. - */ - - if ((curr == snap) && ((curr & 0x1) == 0)) - return 0; - - /* - * If the CPU passed through or entered a dynticks idle phase with - * no active irq handlers, then, as above, this CPU has already - * passed through a quiescent state. - */ - - if ((curr - snap) > 2 || (snap & 0x1) == 0) - return 0; - - /* We need this CPU to go through a quiescent state. */ - - return 1; -} - -#else /* !CONFIG_NO_HZ */ - -# define dyntick_save_progress_counter(cpu) do { } while (0) -# define rcu_try_flip_waitack_needed(cpu) (1) -# define rcu_try_flip_waitmb_needed(cpu) (1) - -# define dyntick_save_progress_counter_sched(cpu) do { } while (0) -# define rcu_qsctr_inc_needed_dyntick(cpu) (1) - -#endif /* CONFIG_NO_HZ */ - -static void save_qsctr_sched(int cpu) -{ - struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - - rdssp->sched_qs_snap = rdssp->sched_qs; -} - -static inline int rcu_qsctr_inc_needed(int cpu) -{ - struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - - /* - * If there has been a quiescent state, no more need to wait - * on this CPU. - */ - - if (rdssp->sched_qs != rdssp->sched_qs_snap) { - smp_mb(); /* force ordering with cpu entering schedule(). */ - return 0; - } - - /* We need this CPU to go through a quiescent state. */ - - return 1; -} - -/* - * Get here when RCU is idle. Decide whether we need to - * move out of idle state, and return non-zero if so. - * "Straightforward" approach for the moment, might later - * use callback-list lengths, grace-period duration, or - * some such to determine when to exit idle state. - * Might also need a pre-idle test that does not acquire - * the lock, but let's get the simple case working first... - */ - -static int -rcu_try_flip_idle(void) -{ - int cpu; - - RCU_TRACE_ME(rcupreempt_trace_try_flip_i1); - if (!rcu_pending(smp_processor_id())) { - RCU_TRACE_ME(rcupreempt_trace_try_flip_ie1); - return 0; - } - - /* - * Do the flip. - */ - - RCU_TRACE_ME(rcupreempt_trace_try_flip_g1); - rcu_ctrlblk.completed++; /* stands in for rcu_try_flip_g2 */ - - /* - * Need a memory barrier so that other CPUs see the new - * counter value before they see the subsequent change of all - * the rcu_flip_flag instances to rcu_flipped. - */ - - smp_mb(); /* see above block comment. */ - - /* Now ask each CPU for acknowledgement of the flip. */ - - for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map)) { - per_cpu(rcu_flip_flag, cpu) = rcu_flipped; - dyntick_save_progress_counter(cpu); - } - - return 1; -} - -/* - * Wait for CPUs to acknowledge the flip. - */ - -static int -rcu_try_flip_waitack(void) -{ - int cpu; - - RCU_TRACE_ME(rcupreempt_trace_try_flip_a1); - for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map)) - if (rcu_try_flip_waitack_needed(cpu) && - per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) { - RCU_TRACE_ME(rcupreempt_trace_try_flip_ae1); - return 0; - } - - /* - * Make sure our checks above don't bleed into subsequent - * waiting for the sum of the counters to reach zero. - */ - - smp_mb(); /* see above block comment. */ - RCU_TRACE_ME(rcupreempt_trace_try_flip_a2); - return 1; -} - -/* - * Wait for collective ``last'' counter to reach zero, - * then tell all CPUs to do an end-of-grace-period memory barrier. - */ - -static int -rcu_try_flip_waitzero(void) -{ - int cpu; - int lastidx = !(rcu_ctrlblk.completed & 0x1); - int sum = 0; - - /* Check to see if the sum of the "last" counters is zero. */ - - RCU_TRACE_ME(rcupreempt_trace_try_flip_z1); - for_each_possible_cpu(cpu) - sum += RCU_DATA_CPU(cpu)->rcu_flipctr[lastidx]; - if (sum != 0) { - RCU_TRACE_ME(rcupreempt_trace_try_flip_ze1); - return 0; - } - - /* - * This ensures that the other CPUs see the call for - * memory barriers -after- the sum to zero has been - * detected here - */ - smp_mb(); /* ^^^^^^^^^^^^ */ - - /* Call for a memory barrier from each CPU. */ - for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map)) { - per_cpu(rcu_mb_flag, cpu) = rcu_mb_needed; - dyntick_save_progress_counter(cpu); - } - - RCU_TRACE_ME(rcupreempt_trace_try_flip_z2); - return 1; -} - -/* - * Wait for all CPUs to do their end-of-grace-period memory barrier. - * Return 0 once all CPUs have done so. - */ - -static int -rcu_try_flip_waitmb(void) -{ - int cpu; - - RCU_TRACE_ME(rcupreempt_trace_try_flip_m1); - for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map)) - if (rcu_try_flip_waitmb_needed(cpu) && - per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) { - RCU_TRACE_ME(rcupreempt_trace_try_flip_me1); - return 0; - } - - smp_mb(); /* Ensure that the above checks precede any following flip. */ - RCU_TRACE_ME(rcupreempt_trace_try_flip_m2); - return 1; -} - -/* - * Attempt a single flip of the counters. Remember, a single flip does - * -not- constitute a grace period. Instead, the interval between - * at least GP_STAGES consecutive flips is a grace period. - * - * If anyone is nuts enough to run this CONFIG_PREEMPT_RCU implementation - * on a large SMP, they might want to use a hierarchical organization of - * the per-CPU-counter pairs. - */ -static void rcu_try_flip(void) -{ - unsigned long flags; - - RCU_TRACE_ME(rcupreempt_trace_try_flip_1); - if (unlikely(!spin_trylock_irqsave(&rcu_ctrlblk.fliplock, flags))) { - RCU_TRACE_ME(rcupreempt_trace_try_flip_e1); - return; - } - - /* - * Take the next transition(s) through the RCU grace-period - * flip-counter state machine. - */ - - switch (rcu_ctrlblk.rcu_try_flip_state) { - case rcu_try_flip_idle_state: - if (rcu_try_flip_idle()) - rcu_ctrlblk.rcu_try_flip_state = - rcu_try_flip_waitack_state; - break; - case rcu_try_flip_waitack_state: - if (rcu_try_flip_waitack()) - rcu_ctrlblk.rcu_try_flip_state = - rcu_try_flip_waitzero_state; - break; - case rcu_try_flip_waitzero_state: - if (rcu_try_flip_waitzero()) - rcu_ctrlblk.rcu_try_flip_state = - rcu_try_flip_waitmb_state; - break; - case rcu_try_flip_waitmb_state: - if (rcu_try_flip_waitmb()) - rcu_ctrlblk.rcu_try_flip_state = - rcu_try_flip_idle_state; - } - spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags); -} - -/* - * Check to see if this CPU needs to do a memory barrier in order to - * ensure that any prior RCU read-side critical sections have committed - * their counter manipulations and critical-section memory references - * before declaring the grace period to be completed. - */ -static void rcu_check_mb(int cpu) -{ - if (per_cpu(rcu_mb_flag, cpu) == rcu_mb_needed) { - smp_mb(); /* Ensure RCU read-side accesses are visible. */ - per_cpu(rcu_mb_flag, cpu) = rcu_mb_done; - } -} - -void rcu_check_callbacks(int cpu, int user) -{ - unsigned long flags; - struct rcu_data *rdp; - - if (!rcu_pending(cpu)) - return; /* if nothing for RCU to do. */ - - /* - * If this CPU took its interrupt from user mode or from the - * idle loop, and this is not a nested interrupt, then - * this CPU has to have exited all prior preept-disable - * sections of code. So invoke rcu_sched_qs() to note this. - * - * The memory barrier is needed to handle the case where - * writes from a preempt-disable section of code get reordered - * into schedule() by this CPU's write buffer. So the memory - * barrier makes sure that the rcu_sched_qs() is seen by other - * CPUs to happen after any such write. - */ - - rdp = RCU_DATA_CPU(cpu); - if (user || - (idle_cpu(cpu) && !in_softirq() && - hardirq_count() <= (1 << HARDIRQ_SHIFT))) { - smp_mb(); /* Guard against aggressive schedule(). */ - rcu_sched_qs(cpu); - } - - rcu_check_mb(cpu); - if (rcu_ctrlblk.completed == rdp->completed) - rcu_try_flip(); - spin_lock_irqsave(&rdp->lock, flags); - RCU_TRACE_RDP(rcupreempt_trace_check_callbacks, rdp); - __rcu_advance_callbacks(rdp); - if (rdp->donelist == NULL) { - spin_unlock_irqrestore(&rdp->lock, flags); - } else { - spin_unlock_irqrestore(&rdp->lock, flags); - raise_softirq(RCU_SOFTIRQ); - } -} - -/* - * Needed by dynticks, to make sure all RCU processing has finished - * when we go idle: - */ -void rcu_advance_callbacks(int cpu, int user) -{ - unsigned long flags; - struct rcu_data *rdp = RCU_DATA_CPU(cpu); - - if (rcu_ctrlblk.completed == rdp->completed) { - rcu_try_flip(); - if (rcu_ctrlblk.completed == rdp->completed) - return; - } - spin_lock_irqsave(&rdp->lock, flags); - RCU_TRACE_RDP(rcupreempt_trace_check_callbacks, rdp); - __rcu_advance_callbacks(rdp); - spin_unlock_irqrestore(&rdp->lock, flags); -} - -#ifdef CONFIG_HOTPLUG_CPU -#define rcu_offline_cpu_enqueue(srclist, srctail, dstlist, dsttail) do { \ - *dsttail = srclist; \ - if (srclist != NULL) { \ - dsttail = srctail; \ - srclist = NULL; \ - srctail = &srclist;\ - } \ - } while (0) - -void rcu_offline_cpu(int cpu) -{ - int i; - struct rcu_head *list = NULL; - unsigned long flags; - struct rcu_data *rdp = RCU_DATA_CPU(cpu); - struct rcu_head *schedlist = NULL; - struct rcu_head **schedtail = &schedlist; - struct rcu_head **tail = &list; - - /* - * Remove all callbacks from the newly dead CPU, retaining order. - * Otherwise rcu_barrier() will fail - */ - - spin_lock_irqsave(&rdp->lock, flags); - rcu_offline_cpu_enqueue(rdp->donelist, rdp->donetail, list, tail); - for (i = GP_STAGES - 1; i >= 0; i--) - rcu_offline_cpu_enqueue(rdp->waitlist[i], rdp->waittail[i], - list, tail); - rcu_offline_cpu_enqueue(rdp->nextlist, rdp->nexttail, list, tail); - rcu_offline_cpu_enqueue(rdp->waitschedlist, rdp->waitschedtail, - schedlist, schedtail); - rcu_offline_cpu_enqueue(rdp->nextschedlist, rdp->nextschedtail, - schedlist, schedtail); - rdp->rcu_sched_sleeping = 0; - spin_unlock_irqrestore(&rdp->lock, flags); - rdp->waitlistcount = 0; - - /* Disengage the newly dead CPU from the grace-period computation. */ - - spin_lock_irqsave(&rcu_ctrlblk.fliplock, flags); - rcu_check_mb(cpu); - if (per_cpu(rcu_flip_flag, cpu) == rcu_flipped) { - smp_mb(); /* Subsequent counter accesses must see new value */ - per_cpu(rcu_flip_flag, cpu) = rcu_flip_seen; - smp_mb(); /* Subsequent RCU read-side critical sections */ - /* seen -after- acknowledgement. */ - } - - cpumask_clear_cpu(cpu, to_cpumask(rcu_cpu_online_map)); - - spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags); - - /* - * Place the removed callbacks on the current CPU's queue. - * Make them all start a new grace period: simple approach, - * in theory could starve a given set of callbacks, but - * you would need to be doing some serious CPU hotplugging - * to make this happen. If this becomes a problem, adding - * a synchronize_rcu() to the hotplug path would be a simple - * fix. - */ - - local_irq_save(flags); /* disable preempt till we know what lock. */ - rdp = RCU_DATA_ME(); - spin_lock(&rdp->lock); - *rdp->nexttail = list; - if (list) - rdp->nexttail = tail; - *rdp->nextschedtail = schedlist; - if (schedlist) - rdp->nextschedtail = schedtail; - spin_unlock_irqrestore(&rdp->lock, flags); -} - -#else /* #ifdef CONFIG_HOTPLUG_CPU */ - -void rcu_offline_cpu(int cpu) -{ -} - -#endif /* #else #ifdef CONFIG_HOTPLUG_CPU */ - -void __cpuinit rcu_online_cpu(int cpu) -{ - unsigned long flags; - struct rcu_data *rdp; - - spin_lock_irqsave(&rcu_ctrlblk.fliplock, flags); - cpumask_set_cpu(cpu, to_cpumask(rcu_cpu_online_map)); - spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags); - - /* - * The rcu_sched grace-period processing might have bypassed - * this CPU, given that it was not in the rcu_cpu_online_map - * when the grace-period scan started. This means that the - * grace-period task might sleep. So make sure that if this - * should happen, the first callback posted to this CPU will - * wake up the grace-period task if need be. - */ - - rdp = RCU_DATA_CPU(cpu); - spin_lock_irqsave(&rdp->lock, flags); - rdp->rcu_sched_sleeping = 1; - spin_unlock_irqrestore(&rdp->lock, flags); -} - -static void rcu_process_callbacks(struct softirq_action *unused) -{ - unsigned long flags; - struct rcu_head *next, *list; - struct rcu_data *rdp; - - local_irq_save(flags); - rdp = RCU_DATA_ME(); - spin_lock(&rdp->lock); - list = rdp->donelist; - if (list == NULL) { - spin_unlock_irqrestore(&rdp->lock, flags); - return; - } - rdp->donelist = NULL; - rdp->donetail = &rdp->donelist; - RCU_TRACE_RDP(rcupreempt_trace_done_remove, rdp); - spin_unlock_irqrestore(&rdp->lock, flags); - while (list) { - next = list->next; - list->func(list); - list = next; - RCU_TRACE_ME(rcupreempt_trace_invoke); - } -} - -void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) -{ - unsigned long flags; - struct rcu_data *rdp; - - head->func = func; - head->next = NULL; - local_irq_save(flags); - rdp = RCU_DATA_ME(); - spin_lock(&rdp->lock); - __rcu_advance_callbacks(rdp); - *rdp->nexttail = head; - rdp->nexttail = &head->next; - RCU_TRACE_RDP(rcupreempt_trace_next_add, rdp); - spin_unlock_irqrestore(&rdp->lock, flags); -} -EXPORT_SYMBOL_GPL(call_rcu); - -void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) -{ - unsigned long flags; - struct rcu_data *rdp; - int wake_gp = 0; - - head->func = func; - head->next = NULL; - local_irq_save(flags); - rdp = RCU_DATA_ME(); - spin_lock(&rdp->lock); - *rdp->nextschedtail = head; - rdp->nextschedtail = &head->next; - if (rdp->rcu_sched_sleeping) { - - /* Grace-period processing might be sleeping... */ - - rdp->rcu_sched_sleeping = 0; - wake_gp = 1; - } - spin_unlock_irqrestore(&rdp->lock, flags); - if (wake_gp) { - - /* Wake up grace-period processing, unless someone beat us. */ - - spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags); - if (rcu_ctrlblk.sched_sleep != rcu_sched_sleeping) - wake_gp = 0; - rcu_ctrlblk.sched_sleep = rcu_sched_not_sleeping; - spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags); - if (wake_gp) - wake_up_interruptible(&rcu_ctrlblk.sched_wq); - } -} -EXPORT_SYMBOL_GPL(call_rcu_sched); - -/* - * Wait until all currently running preempt_disable() code segments - * (including hardware-irq-disable segments) complete. Note that - * in -rt this does -not- necessarily result in all currently executing - * interrupt -handlers- having completed. - */ -void __synchronize_sched(void) -{ - struct rcu_synchronize rcu; - - if (num_online_cpus() == 1) - return; /* blocking is gp if only one CPU! */ - - init_completion(&rcu.completion); - /* Will wake me after RCU finished. */ - call_rcu_sched(&rcu.head, wakeme_after_rcu); - /* Wait for it. */ - wait_for_completion(&rcu.completion); -} -EXPORT_SYMBOL_GPL(__synchronize_sched); - -/* - * kthread function that manages call_rcu_sched grace periods. - */ -static int rcu_sched_grace_period(void *arg) -{ - int couldsleep; /* might sleep after current pass. */ - int couldsleepnext = 0; /* might sleep after next pass. */ - int cpu; - unsigned long flags; - struct rcu_data *rdp; - int ret; - - /* - * Each pass through the following loop handles one - * rcu_sched grace period cycle. - */ - do { - /* Save each CPU's current state. */ - - for_each_online_cpu(cpu) { - dyntick_save_progress_counter_sched(cpu); - save_qsctr_sched(cpu); - } - - /* - * Sleep for about an RCU grace-period's worth to - * allow better batching and to consume less CPU. - */ - schedule_timeout_interruptible(RCU_SCHED_BATCH_TIME); - - /* - * If there was nothing to do last time, prepare to - * sleep at the end of the current grace period cycle. - */ - couldsleep = couldsleepnext; - couldsleepnext = 1; - if (couldsleep) { - spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags); - rcu_ctrlblk.sched_sleep = rcu_sched_sleep_prep; - spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags); - } - - /* - * Wait on each CPU in turn to have either visited - * a quiescent state or been in dynticks-idle mode. - */ - for_each_online_cpu(cpu) { - while (rcu_qsctr_inc_needed(cpu) && - rcu_qsctr_inc_needed_dyntick(cpu)) { - /* resched_cpu(cpu); @@@ */ - schedule_timeout_interruptible(1); - } - } - - /* Advance callbacks for each CPU. */ - - for_each_online_cpu(cpu) { - - rdp = RCU_DATA_CPU(cpu); - spin_lock_irqsave(&rdp->lock, flags); - - /* - * We are running on this CPU irq-disabled, so no - * CPU can go offline until we re-enable irqs. - * The current CPU might have already gone - * offline (between the for_each_offline_cpu and - * the spin_lock_irqsave), but in that case all its - * callback lists will be empty, so no harm done. - * - * Advance the callbacks! We share normal RCU's - * donelist, since callbacks are invoked the - * same way in either case. - */ - if (rdp->waitschedlist != NULL) { - *rdp->donetail = rdp->waitschedlist; - rdp->donetail = rdp->waitschedtail; - - /* - * Next rcu_check_callbacks() will - * do the required raise_softirq(). - */ - } - if (rdp->nextschedlist != NULL) { - rdp->waitschedlist = rdp->nextschedlist; - rdp->waitschedtail = rdp->nextschedtail; - couldsleep = 0; - couldsleepnext = 0; - } else { - rdp->waitschedlist = NULL; - rdp->waitschedtail = &rdp->waitschedlist; - } - rdp->nextschedlist = NULL; - rdp->nextschedtail = &rdp->nextschedlist; - - /* Mark sleep intention. */ - - rdp->rcu_sched_sleeping = couldsleep; - - spin_unlock_irqrestore(&rdp->lock, flags); - } - - /* If we saw callbacks on the last scan, go deal with them. */ - - if (!couldsleep) - continue; - - /* Attempt to block... */ - - spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags); - if (rcu_ctrlblk.sched_sleep != rcu_sched_sleep_prep) { - - /* - * Someone posted a callback after we scanned. - * Go take care of it. - */ - spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags); - couldsleepnext = 0; - continue; - } - - /* Block until the next person posts a callback. */ - - rcu_ctrlblk.sched_sleep = rcu_sched_sleeping; - spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags); - ret = 0; /* unused */ - __wait_event_interruptible(rcu_ctrlblk.sched_wq, - rcu_ctrlblk.sched_sleep != rcu_sched_sleeping, - ret); - - couldsleepnext = 0; - - } while (!kthread_should_stop()); - - return (0); -} - -/* - * Check to see if any future RCU-related work will need to be done - * by the current CPU, even if none need be done immediately, returning - * 1 if so. Assumes that notifiers would take care of handling any - * outstanding requests from the RCU core. - * - * This function is part of the RCU implementation; it is -not- - * an exported member of the RCU API. - */ -int rcu_needs_cpu(int cpu) -{ - struct rcu_data *rdp = RCU_DATA_CPU(cpu); - - return (rdp->donelist != NULL || - !!rdp->waitlistcount || - rdp->nextlist != NULL || - rdp->nextschedlist != NULL || - rdp->waitschedlist != NULL); -} - -static int rcu_pending(int cpu) -{ - struct rcu_data *rdp = RCU_DATA_CPU(cpu); - - /* The CPU has at least one callback queued somewhere. */ - - if (rdp->donelist != NULL || - !!rdp->waitlistcount || - rdp->nextlist != NULL || - rdp->nextschedlist != NULL || - rdp->waitschedlist != NULL) - return 1; - - /* The RCU core needs an acknowledgement from this CPU. */ - - if ((per_cpu(rcu_flip_flag, cpu) == rcu_flipped) || - (per_cpu(rcu_mb_flag, cpu) == rcu_mb_needed)) - return 1; - - /* This CPU has fallen behind the global grace-period number. */ - - if (rdp->completed != rcu_ctrlblk.completed) - return 1; - - /* Nothing needed from this CPU. */ - - return 0; -} - -int __cpuinit rcu_cpu_notify(struct notifier_block *self, - unsigned long action, void *hcpu) -{ - long cpu = (long)hcpu; - - switch (action) { - case CPU_UP_PREPARE: - case CPU_UP_PREPARE_FROZEN: - rcu_online_cpu(cpu); - break; - case CPU_UP_CANCELED: - case CPU_UP_CANCELED_FROZEN: - case CPU_DEAD: - case CPU_DEAD_FROZEN: - rcu_offline_cpu(cpu); - break; - default: - break; - } - return NOTIFY_OK; -} - -void __init __rcu_init(void) -{ - int cpu; - int i; - struct rcu_data *rdp; - - printk(KERN_NOTICE "Preemptible RCU implementation.\n"); - for_each_possible_cpu(cpu) { - rdp = RCU_DATA_CPU(cpu); - spin_lock_init(&rdp->lock); - rdp->completed = 0; - rdp->waitlistcount = 0; - rdp->nextlist = NULL; - rdp->nexttail = &rdp->nextlist; - for (i = 0; i < GP_STAGES; i++) { - rdp->waitlist[i] = NULL; - rdp->waittail[i] = &rdp->waitlist[i]; - } - rdp->donelist = NULL; - rdp->donetail = &rdp->donelist; - rdp->rcu_flipctr[0] = 0; - rdp->rcu_flipctr[1] = 0; - rdp->nextschedlist = NULL; - rdp->nextschedtail = &rdp->nextschedlist; - rdp->waitschedlist = NULL; - rdp->waitschedtail = &rdp->waitschedlist; - rdp->rcu_sched_sleeping = 0; - } - open_softirq(RCU_SOFTIRQ, rcu_process_callbacks); -} - -/* - * Late-boot-time RCU initialization that must wait until after scheduler - * has been initialized. - */ -void __init rcu_init_sched(void) -{ - rcu_sched_grace_period_task = kthread_run(rcu_sched_grace_period, - NULL, - "rcu_sched_grace_period"); - WARN_ON(IS_ERR(rcu_sched_grace_period_task)); -} - -#ifdef CONFIG_RCU_TRACE -long *rcupreempt_flipctr(int cpu) -{ - return &RCU_DATA_CPU(cpu)->rcu_flipctr[0]; -} -EXPORT_SYMBOL_GPL(rcupreempt_flipctr); - -int rcupreempt_flip_flag(int cpu) -{ - return per_cpu(rcu_flip_flag, cpu); -} -EXPORT_SYMBOL_GPL(rcupreempt_flip_flag); - -int rcupreempt_mb_flag(int cpu) -{ - return per_cpu(rcu_mb_flag, cpu); -} -EXPORT_SYMBOL_GPL(rcupreempt_mb_flag); - -char *rcupreempt_try_flip_state_name(void) -{ - return rcu_try_flip_state_names[rcu_ctrlblk.rcu_try_flip_state]; -} -EXPORT_SYMBOL_GPL(rcupreempt_try_flip_state_name); - -struct rcupreempt_trace *rcupreempt_trace_cpu(int cpu) -{ - struct rcu_data *rdp = RCU_DATA_CPU(cpu); - - return &rdp->trace; -} -EXPORT_SYMBOL_GPL(rcupreempt_trace_cpu); - -#endif /* #ifdef RCU_TRACE */ diff --git a/kernel/rcupreempt_trace.c b/kernel/rcupreempt_trace.c deleted file mode 100644 index 11640346a50..00000000000 --- a/kernel/rcupreempt_trace.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - * Read-Copy Update tracing for realtime implementation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright IBM Corporation, 2006 - * - * Papers: http://www.rdrop.com/users/paulmck/RCU - * - * For detailed explanation of Read-Copy Update mechanism see - - * Documentation/RCU/ *.txt - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct mutex rcupreempt_trace_mutex; -static char *rcupreempt_trace_buf; -#define RCUPREEMPT_TRACE_BUF_SIZE 4096 - -void rcupreempt_trace_move2done(struct rcupreempt_trace *trace) -{ - trace->done_length += trace->wait_length; - trace->done_add += trace->wait_length; - trace->wait_length = 0; -} -void rcupreempt_trace_move2wait(struct rcupreempt_trace *trace) -{ - trace->wait_length += trace->next_length; - trace->wait_add += trace->next_length; - trace->next_length = 0; -} -void rcupreempt_trace_try_flip_1(struct rcupreempt_trace *trace) -{ - atomic_inc(&trace->rcu_try_flip_1); -} -void rcupreempt_trace_try_flip_e1(struct rcupreempt_trace *trace) -{ - atomic_inc(&trace->rcu_try_flip_e1); -} -void rcupreempt_trace_try_flip_i1(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_i1++; -} -void rcupreempt_trace_try_flip_ie1(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_ie1++; -} -void rcupreempt_trace_try_flip_g1(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_g1++; -} -void rcupreempt_trace_try_flip_a1(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_a1++; -} -void rcupreempt_trace_try_flip_ae1(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_ae1++; -} -void rcupreempt_trace_try_flip_a2(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_a2++; -} -void rcupreempt_trace_try_flip_z1(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_z1++; -} -void rcupreempt_trace_try_flip_ze1(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_ze1++; -} -void rcupreempt_trace_try_flip_z2(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_z2++; -} -void rcupreempt_trace_try_flip_m1(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_m1++; -} -void rcupreempt_trace_try_flip_me1(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_me1++; -} -void rcupreempt_trace_try_flip_m2(struct rcupreempt_trace *trace) -{ - trace->rcu_try_flip_m2++; -} -void rcupreempt_trace_check_callbacks(struct rcupreempt_trace *trace) -{ - trace->rcu_check_callbacks++; -} -void rcupreempt_trace_done_remove(struct rcupreempt_trace *trace) -{ - trace->done_remove += trace->done_length; - trace->done_length = 0; -} -void rcupreempt_trace_invoke(struct rcupreempt_trace *trace) -{ - atomic_inc(&trace->done_invoked); -} -void rcupreempt_trace_next_add(struct rcupreempt_trace *trace) -{ - trace->next_add++; - trace->next_length++; -} - -static void rcupreempt_trace_sum(struct rcupreempt_trace *sp) -{ - struct rcupreempt_trace *cp; - int cpu; - - memset(sp, 0, sizeof(*sp)); - for_each_possible_cpu(cpu) { - cp = rcupreempt_trace_cpu(cpu); - sp->next_length += cp->next_length; - sp->next_add += cp->next_add; - sp->wait_length += cp->wait_length; - sp->wait_add += cp->wait_add; - sp->done_length += cp->done_length; - sp->done_add += cp->done_add; - sp->done_remove += cp->done_remove; - atomic_add(atomic_read(&cp->done_invoked), &sp->done_invoked); - sp->rcu_check_callbacks += cp->rcu_check_callbacks; - atomic_add(atomic_read(&cp->rcu_try_flip_1), - &sp->rcu_try_flip_1); - atomic_add(atomic_read(&cp->rcu_try_flip_e1), - &sp->rcu_try_flip_e1); - sp->rcu_try_flip_i1 += cp->rcu_try_flip_i1; - sp->rcu_try_flip_ie1 += cp->rcu_try_flip_ie1; - sp->rcu_try_flip_g1 += cp->rcu_try_flip_g1; - sp->rcu_try_flip_a1 += cp->rcu_try_flip_a1; - sp->rcu_try_flip_ae1 += cp->rcu_try_flip_ae1; - sp->rcu_try_flip_a2 += cp->rcu_try_flip_a2; - sp->rcu_try_flip_z1 += cp->rcu_try_flip_z1; - sp->rcu_try_flip_ze1 += cp->rcu_try_flip_ze1; - sp->rcu_try_flip_z2 += cp->rcu_try_flip_z2; - sp->rcu_try_flip_m1 += cp->rcu_try_flip_m1; - sp->rcu_try_flip_me1 += cp->rcu_try_flip_me1; - sp->rcu_try_flip_m2 += cp->rcu_try_flip_m2; - } -} - -static ssize_t rcustats_read(struct file *filp, char __user *buffer, - size_t count, loff_t *ppos) -{ - struct rcupreempt_trace trace; - ssize_t bcount; - int cnt = 0; - - rcupreempt_trace_sum(&trace); - mutex_lock(&rcupreempt_trace_mutex); - snprintf(&rcupreempt_trace_buf[cnt], RCUPREEMPT_TRACE_BUF_SIZE - cnt, - "ggp=%ld rcc=%ld\n", - rcu_batches_completed(), - trace.rcu_check_callbacks); - snprintf(&rcupreempt_trace_buf[cnt], RCUPREEMPT_TRACE_BUF_SIZE - cnt, - "na=%ld nl=%ld wa=%ld wl=%ld da=%ld dl=%ld dr=%ld di=%d\n" - "1=%d e1=%d i1=%ld ie1=%ld g1=%ld a1=%ld ae1=%ld a2=%ld\n" - "z1=%ld ze1=%ld z2=%ld m1=%ld me1=%ld m2=%ld\n", - - trace.next_add, trace.next_length, - trace.wait_add, trace.wait_length, - trace.done_add, trace.done_length, - trace.done_remove, atomic_read(&trace.done_invoked), - atomic_read(&trace.rcu_try_flip_1), - atomic_read(&trace.rcu_try_flip_e1), - trace.rcu_try_flip_i1, trace.rcu_try_flip_ie1, - trace.rcu_try_flip_g1, - trace.rcu_try_flip_a1, trace.rcu_try_flip_ae1, - trace.rcu_try_flip_a2, - trace.rcu_try_flip_z1, trace.rcu_try_flip_ze1, - trace.rcu_try_flip_z2, - trace.rcu_try_flip_m1, trace.rcu_try_flip_me1, - trace.rcu_try_flip_m2); - bcount = simple_read_from_buffer(buffer, count, ppos, - rcupreempt_trace_buf, strlen(rcupreempt_trace_buf)); - mutex_unlock(&rcupreempt_trace_mutex); - return bcount; -} - -static ssize_t rcugp_read(struct file *filp, char __user *buffer, - size_t count, loff_t *ppos) -{ - long oldgp = rcu_batches_completed(); - ssize_t bcount; - - mutex_lock(&rcupreempt_trace_mutex); - synchronize_rcu(); - snprintf(rcupreempt_trace_buf, RCUPREEMPT_TRACE_BUF_SIZE, - "oldggp=%ld newggp=%ld\n", oldgp, rcu_batches_completed()); - bcount = simple_read_from_buffer(buffer, count, ppos, - rcupreempt_trace_buf, strlen(rcupreempt_trace_buf)); - mutex_unlock(&rcupreempt_trace_mutex); - return bcount; -} - -static ssize_t rcuctrs_read(struct file *filp, char __user *buffer, - size_t count, loff_t *ppos) -{ - int cnt = 0; - int cpu; - int f = rcu_batches_completed() & 0x1; - ssize_t bcount; - - mutex_lock(&rcupreempt_trace_mutex); - - cnt += snprintf(&rcupreempt_trace_buf[cnt], RCUPREEMPT_TRACE_BUF_SIZE, - "CPU last cur F M\n"); - for_each_possible_cpu(cpu) { - long *flipctr = rcupreempt_flipctr(cpu); - cnt += snprintf(&rcupreempt_trace_buf[cnt], - RCUPREEMPT_TRACE_BUF_SIZE - cnt, - "%3d%c %4ld %3ld %d %d\n", - cpu, - cpu_is_offline(cpu) ? '!' : ' ', - flipctr[!f], - flipctr[f], - rcupreempt_flip_flag(cpu), - rcupreempt_mb_flag(cpu)); - } - cnt += snprintf(&rcupreempt_trace_buf[cnt], - RCUPREEMPT_TRACE_BUF_SIZE - cnt, - "ggp = %ld, state = %s\n", - rcu_batches_completed(), - rcupreempt_try_flip_state_name()); - cnt += snprintf(&rcupreempt_trace_buf[cnt], - RCUPREEMPT_TRACE_BUF_SIZE - cnt, - "\n"); - bcount = simple_read_from_buffer(buffer, count, ppos, - rcupreempt_trace_buf, strlen(rcupreempt_trace_buf)); - mutex_unlock(&rcupreempt_trace_mutex); - return bcount; -} - -static struct file_operations rcustats_fops = { - .owner = THIS_MODULE, - .read = rcustats_read, -}; - -static struct file_operations rcugp_fops = { - .owner = THIS_MODULE, - .read = rcugp_read, -}; - -static struct file_operations rcuctrs_fops = { - .owner = THIS_MODULE, - .read = rcuctrs_read, -}; - -static struct dentry *rcudir, *statdir, *ctrsdir, *gpdir; -static int rcupreempt_debugfs_init(void) -{ - rcudir = debugfs_create_dir("rcu", NULL); - if (!rcudir) - goto out; - statdir = debugfs_create_file("rcustats", 0444, rcudir, - NULL, &rcustats_fops); - if (!statdir) - goto free_out; - - gpdir = debugfs_create_file("rcugp", 0444, rcudir, NULL, &rcugp_fops); - if (!gpdir) - goto free_out; - - ctrsdir = debugfs_create_file("rcuctrs", 0444, rcudir, - NULL, &rcuctrs_fops); - if (!ctrsdir) - goto free_out; - return 0; -free_out: - if (statdir) - debugfs_remove(statdir); - if (gpdir) - debugfs_remove(gpdir); - debugfs_remove(rcudir); -out: - return 1; -} - -static int __init rcupreempt_trace_init(void) -{ - int ret; - - mutex_init(&rcupreempt_trace_mutex); - rcupreempt_trace_buf = kmalloc(RCUPREEMPT_TRACE_BUF_SIZE, GFP_KERNEL); - if (!rcupreempt_trace_buf) - return 1; - ret = rcupreempt_debugfs_init(); - if (ret) - kfree(rcupreempt_trace_buf); - return ret; -} - -static void __exit rcupreempt_trace_cleanup(void) -{ - debugfs_remove(statdir); - debugfs_remove(gpdir); - debugfs_remove(ctrsdir); - debugfs_remove(rcudir); - kfree(rcupreempt_trace_buf); -} - - -module_init(rcupreempt_trace_init); -module_exit(rcupreempt_trace_cleanup); diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index f87fb0c8f92..82fbc49728d 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -725,7 +725,7 @@ config RCU_TORTURE_TEST_RUNNABLE config RCU_CPU_STALL_DETECTOR bool "Check for stalled CPUs delaying RCU grace periods" - depends on CLASSIC_RCU || TREE_RCU || TREE_PREEMPT_RCU + depends on TREE_RCU || TREE_PREEMPT_RCU default n help This option causes RCU to printk information on which -- cgit v1.2.3-70-g09d2 From e2e465693247b7f81e85aa8b1b482d9502812be4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 25 Aug 2009 18:25:30 +0200 Subject: ALSA: hda - Add / fix model entries for HD-audio driver Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 775beea4506..abffd411232 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -136,6 +136,7 @@ ALC882/883/885/888/889 acer-aspire Acer Aspire 9810 acer-aspire-4930g Acer Aspire 4930G acer-aspire-6530g Acer Aspire 6530G + acer-aspire-7730g Acer Aspire 7730G acer-aspire-8930g Acer Aspire 8930G medion Medion Laptops medion-md2 Medion MD2 @@ -227,7 +228,7 @@ AD1984 ====== basic default configuration thinkpad Lenovo Thinkpad T61/X61 - dell Dell T3400 + dell_desktop Dell T3400 AD1986A ======= @@ -256,6 +257,7 @@ Conexant 5045 laptop-micsense Laptop with Mic sense (old model fujitsu) laptop-hpmicsense Laptop with HP and Mic senses benq Benq R55E + laptop-hp530 HP 530 laptop test for testing/debugging purpose, almost all controls can be adjusted. Appearing only when compiled with $CONFIG_SND_DEBUG=y @@ -276,9 +278,16 @@ Conexant 5051 hp-dv6736 HP dv6736 lenovo-x200 Lenovo X200 laptop +Conexant 5066 +============= + laptop Basic Laptop config (default) + dell-laptop Dell laptops + olpc-xo-1_5 OLPC XO 1.5 + STAC9200 ======== ref Reference board + oqo OQO Model 2 dell-d21 Dell (unknown) dell-d22 Dell (unknown) dell-d23 Dell (unknown) @@ -366,6 +375,7 @@ STAC92HD73* =========== ref Reference board no-jd BIOS setup but without jack-detection + intel Intel DG45* mobos dell-m6-amic Dell desktops/laptops with analog mics dell-m6-dmic Dell desktops/laptops with digital mics dell-m6 Dell desktops/laptops with both type of mics @@ -387,3 +397,4 @@ STAC9872 Cirrus Logic CS4206/4207 ======================== mbp55 MacBook Pro 5,5 + auto BIOS setup (default) -- cgit v1.2.3-70-g09d2 From 189d84ed54bbb05aac5b24d9d784d86c4d37f807 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 27 Aug 2009 14:29:15 +0100 Subject: kmemleak: Dump object information on request By writing dump= to the kmemleak file, kmemleak will look up an object with that address and dump the information it has about it to syslog. This is useful in debugging memory leaks. Signed-off-by: Catalin Marinas --- Documentation/kmemleak.txt | 1 + mm/kmemleak.c | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt index 89068030b01..c223785339b 100644 --- a/Documentation/kmemleak.txt +++ b/Documentation/kmemleak.txt @@ -42,6 +42,7 @@ Memory scanning parameters can be modified at run-time by writing to the scan= - set the automatic memory scanning period in seconds (default 600, 0 to stop the automatic scanning) scan - trigger a memory scan + dump= - dump information about the object found at Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on the kernel command line. diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 6debe0d80e6..c977f7a2f0e 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -331,6 +331,7 @@ static void dump_object_info(struct kmemleak_object *object) object->comm, object->pid, object->jiffies); pr_notice(" min_count = %d\n", object->min_count); pr_notice(" count = %d\n", object->count); + pr_notice(" flags = 0x%lx\n", object->flags); pr_notice(" backtrace:\n"); print_stack_trace(&trace, 4); } @@ -1307,6 +1308,27 @@ static int kmemleak_release(struct inode *inode, struct file *file) return seq_release(inode, file); } +static int dump_str_object_info(const char *str) +{ + unsigned long flags; + struct kmemleak_object *object; + unsigned long addr; + + addr= simple_strtoul(str, NULL, 0); + object = find_and_get_object(addr, 0); + if (!object) { + pr_info("Unknown object at 0x%08lx\n", addr); + return -EINVAL; + } + + spin_lock_irqsave(&object->lock, flags); + dump_object_info(object); + spin_unlock_irqrestore(&object->lock, flags); + + put_object(object); + return 0; +} + /* * File write operation to configure kmemleak at run-time. The following * commands can be written to the /sys/kernel/debug/kmemleak file: @@ -1318,6 +1340,7 @@ static int kmemleak_release(struct inode *inode, struct file *file) * scan=... - set the automatic memory scanning period in seconds (0 to * disable it) * scan - trigger a memory scan + * dump=... - dump information about the object found at the given address */ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf, size_t size, loff_t *ppos) @@ -1358,6 +1381,8 @@ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf, } } else if (strncmp(buf, "scan", 4) == 0) kmemleak_scan(); + else if (strncmp(buf, "dump=", 5) == 0) + ret = dump_str_object_info(buf + 5); else ret = -EINVAL; -- cgit v1.2.3-70-g09d2 From 36ce99c1dcab2978fc1900f19b431adedd8f99f6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 27 Aug 2009 16:45:07 +0200 Subject: ALSA: Add debug module option Add debug module option to snd core. This controls the debug print level. When CONFIG_SND_DEBUG_VERBOSE is set, you can suppress the debug messages by giving or changing this parameter to a lower value. debug=0 means no debug messsages. As default, it's set to the verbose level 2. Since this option can be changed dynamically via sysfs file, you can suppress the verbose debug messages on the fly, which wasn't possible before. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 6 +++ include/sound/core.h | 38 ++++++-------- sound/core/misc.c | 67 ++++++++++++++----------- 3 files changed, 59 insertions(+), 52 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 4252697a95d..8e5b3488b37 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -60,6 +60,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. slots - Reserve the slot index for the given driver. This option takes multiple strings. See "Module Autoloading Support" section for details. + debug - Specifies the debug message level + (0 = disable debug prints, 1 = normal debug messages, + 2 = verbose debug messages) + This option appears only when CONFIG_SND_DEBUG=y. + This option can be dynamically changed via sysfs + /sys/modules/snd/parameters/debug file. Module snd-pcm-oss ------------------ diff --git a/include/sound/core.h b/include/sound/core.h index 309cb9659a0..a89728db558 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -340,18 +340,17 @@ unsigned int snd_dma_pointer(unsigned long dma, unsigned int size); struct resource; void release_and_free_resource(struct resource *res); -#ifdef CONFIG_SND_VERBOSE_PRINTK -void snd_verbose_printk(const char *file, int line, const char *format, ...) - __attribute__ ((format (printf, 3, 4))); -#endif -#if defined(CONFIG_SND_DEBUG) && defined(CONFIG_SND_VERBOSE_PRINTK) -void snd_verbose_printd(const char *file, int line, const char *format, ...) - __attribute__ ((format (printf, 3, 4))); -#endif - /* --- */ -#ifdef CONFIG_SND_VERBOSE_PRINTK +#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK) +void __snd_printk(unsigned int level, const char *file, int line, + const char *format, ...) + __attribute__ ((format (printf, 4, 5))); +#else +#define __snd_printk(level, file, line, format, args...) \ + prinkt(format, ##args) +#endif + /** * snd_printk - printk wrapper * @fmt: format string @@ -360,15 +359,9 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) * when configured with CONFIG_SND_VERBOSE_PRINTK. */ #define snd_printk(fmt, args...) \ - snd_verbose_printk(__FILE__, __LINE__, fmt ,##args) -#else -#define snd_printk(fmt, args...) \ - printk(fmt ,##args) -#endif + __snd_printk(0, __FILE__, __LINE__, fmt, ##args) #ifdef CONFIG_SND_DEBUG - -#ifdef CONFIG_SND_VERBOSE_PRINTK /** * snd_printd - debug printk * @fmt: format string @@ -377,11 +370,7 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) * Ignored when CONFIG_SND_DEBUG is not set. */ #define snd_printd(fmt, args...) \ - snd_verbose_printd(__FILE__, __LINE__, fmt ,##args) -#else -#define snd_printd(fmt, args...) \ - printk(fmt ,##args) -#endif + __snd_printk(1, __FILE__, __LINE__, fmt, ##args) /** * snd_BUG - give a BUG warning message and stack trace @@ -428,9 +417,10 @@ static inline int __snd_bug_on(int cond) * Works like snd_printk() for debugging purposes. * Ignored when CONFIG_SND_DEBUG_VERBOSE is not set. */ -#define snd_printdd(format, args...) snd_printk(format, ##args) +#define snd_printdd(format, args...) \ + __snd_printk(2, __FILE__, __LINE__, format, ##args) #else -#define snd_printdd(format, args...) /* nothing */ +#define snd_printdd(format, args...) do { } while (0) #endif diff --git a/sound/core/misc.c b/sound/core/misc.c index 1d29e678369..23a032c6d48 100644 --- a/sound/core/misc.c +++ b/sound/core/misc.c @@ -24,6 +24,20 @@ #include #include +#ifdef CONFIG_SND_DEBUG + +#ifdef CONFIG_SND_DEBUG_VERBOSE +#define DEFAULT_DEBUG_LEVEL 2 +#else +#define DEFAULT_DEBUG_LEVEL 1 +#endif + +static int debug = DEFAULT_DEBUG_LEVEL; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0 = disable)"); + +#endif /* CONFIG_SND_DEBUG */ + void release_and_free_resource(struct resource *res) { if (res) { @@ -35,6 +49,7 @@ void release_and_free_resource(struct resource *res) EXPORT_SYMBOL(release_and_free_resource); #ifdef CONFIG_SND_VERBOSE_PRINTK +/* strip the leading path if the given path is absolute */ static const char *sanity_file_name(const char *path) { if (*path == '/') @@ -43,48 +58,44 @@ static const char *sanity_file_name(const char *path) return path; } -void snd_verbose_printk(const char *path, int line, const char *format, ...) +/* print file and line with a certain printk prefix */ +static int print_snd_pfx(unsigned int level, const char *path, int line, + const char *format) { const char *file = sanity_file_name(path); - va_list args; - - if (format[0] == '<' && format[1] >= '0' && format[1] <= '7' && format[2] == '>') { - char tmp[] = "<0>"; + char tmp[] = "<0>"; + const char *pfx = level ? KERN_DEBUG : KERN_DEFAULT; + int ret = 0; + + if (format[0] == '<' && format[2] == '>') { tmp[1] = format[1]; - printk("%sALSA %s:%d: ", tmp, file, line); - format += 3; - } else { - printk("ALSA %s:%d: ", file, line); + pfx = tmp; + ret = 1; } - va_start(args, format); - vprintk(format, args); - va_end(args); + printk("%sALSA %s:%d: ", pfx, file, line); + return ret; } - -EXPORT_SYMBOL(snd_verbose_printk); +#else +#define print_snd_pfx(level, path, line, format) 0 #endif -#if defined(CONFIG_SND_DEBUG) && defined(CONFIG_SND_VERBOSE_PRINTK) -void snd_verbose_printd(const char *path, int line, const char *format, ...) +#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK) +void __snd_printk(unsigned int level, const char *path, int line, + const char *format, ...) { - const char *file = sanity_file_name(path); va_list args; - if (format[0] == '<' && format[1] >= '0' && format[1] <= '7' && format[2] == '>') { - char tmp[] = "<0>"; - tmp[1] = format[1]; - printk("%sALSA %s:%d: ", tmp, file, line); - format += 3; - } else { - printk(KERN_DEBUG "ALSA %s:%d: ", file, line); - } +#ifdef CONFIG_SND_DEBUG + if (debug < level) + return; +#endif va_start(args, format); + if (print_snd_pfx(level, path, line, format)) + format += 3; /* skip the printk level-prefix */ vprintk(format, args); va_end(args); - } - -EXPORT_SYMBOL(snd_verbose_printd); +EXPORT_SYMBOL_GPL(__snd_printk); #endif #ifdef CONFIG_PCI -- cgit v1.2.3-70-g09d2 From d0a6825c9217cfc52d39b2b2bedd73bef8019f79 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Fri, 28 Aug 2009 12:56:42 +0000 Subject: eeepc-laptop: document sysfs interface Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- .../ABI/testing/sysfs-platform-eeepc-laptop | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-platform-eeepc-laptop (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-laptop b/Documentation/ABI/testing/sysfs-platform-eeepc-laptop new file mode 100644 index 00000000000..7445dfb321b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-eeepc-laptop @@ -0,0 +1,50 @@ +What: /sys/devices/platform/eeepc-laptop/disp +Date: May 2008 +KernelVersion: 2.6.26 +Contact: "Corentin Chary" +Description: + This file allows display switching. + - 1 = LCD + - 2 = CRT + - 3 = LCD+CRT + If you run X11, you should use xrandr instead. + +What: /sys/devices/platform/eeepc-laptop/camera +Date: May 2008 +KernelVersion: 2.6.26 +Contact: "Corentin Chary" +Description: + Control the camera. 1 means on, 0 means off. + +What: /sys/devices/platform/eeepc-laptop/cardr +Date: May 2008 +KernelVersion: 2.6.26 +Contact: "Corentin Chary" +Description: + Control the card reader. 1 means on, 0 means off. + +What: /sys/devices/platform/eeepc-laptop/cpufv +Date: Jun 2009 +KernelVersion: 2.6.31 +Contact: "Corentin Chary" +Description: + Change CPU clock configuration. + On the Eee PC 1000H there are three available clock configuration: + * 0 -> Super Performance Mode + * 1 -> High Performance Mode + * 2 -> Power Saving Mode + On Eee PC 701 there is only 2 available clock configurations. + Available configuration are listed in available_cpufv file. + Reading this file will show the raw hexadecimal value which + is defined as follow: + | 8 bit | 8 bit | + | `---- Current mode + `------------ Availables modes + For example, 0x301 means: mode 1 selected, 3 available modes. + +What: /sys/devices/platform/eeepc-laptop/available_cpufv +Date: Jun 2009 +KernelVersion: 2.6.31 +Contact: "Corentin Chary" +Description: + List available cpufv modes. -- cgit v1.2.3-70-g09d2 From 3c4c1b69a2d76ac9a1c716233fde956dba757d76 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Fri, 28 Aug 2009 12:56:43 +0000 Subject: video/backlight: document sysfs interface Date and KernelVersion may be wrong because the backlight interface was introduced before git initial import. Cc:Richard Purdie Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- Documentation/ABI/stable/sysfs-class-backlight | 36 ++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/ABI/stable/sysfs-class-backlight (limited to 'Documentation') diff --git a/Documentation/ABI/stable/sysfs-class-backlight b/Documentation/ABI/stable/sysfs-class-backlight new file mode 100644 index 00000000000..4d637e1c4ff --- /dev/null +++ b/Documentation/ABI/stable/sysfs-class-backlight @@ -0,0 +1,36 @@ +What: /sys/class/backlight//bl_power +Date: April 2005 +KernelVersion: 2.6.12 +Contact: Richard Purdie +Description: + Control BACKLIGHT power, values are FB_BLANK_* from fb.h + - FB_BLANK_UNBLANK (0) : power on. + - FB_BLANK_POWERDOWN (4) : power off +Users: HAL + +What: /sys/class/backlight//brightness +Date: April 2005 +KernelVersion: 2.6.12 +Contact: Richard Purdie +Description: + Control the brightness for this . Values + are between 0 and max_brightness. This file will also + show the brightness level stored in the driver, which + may not be the actual brightness (see actual_brightness). +Users: HAL + +What: /sys/class/backlight//actual_brightness +Date: March 2006 +KernelVersion: 2.6.17 +Contact: Richard Purdie +Description: + Show the actual brightness by querying the hardware. +Users: HAL + +What: /sys/class/backlight//max_brightness +Date: April 2005 +KernelVersion: 2.6.12 +Contact: Richard Purdie +Description: + Maximum brightness for . +Users: HAL -- cgit v1.2.3-70-g09d2 From 243ca3e401bc62e704785d215931f1a51fd53bd7 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Fri, 28 Aug 2009 12:56:44 +0000 Subject: video/lcd: document sysfs interface Date and KernelVersion may be wrong because the lcd interface was introduced before git initial import. Cc: Richard Purdie Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- Documentation/ABI/testing/sysfs-class-lcd | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-lcd (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-class-lcd b/Documentation/ABI/testing/sysfs-class-lcd new file mode 100644 index 00000000000..35906bf7aa7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-lcd @@ -0,0 +1,23 @@ +What: /sys/class/lcd//lcd_power +Date: April 2005 +KernelVersion: 2.6.12 +Contact: Richard Purdie +Description: + Control LCD power, values are FB_BLANK_* from fb.h + - FB_BLANK_UNBLANK (0) : power on. + - FB_BLANK_POWERDOWN (4) : power off + +What: /sys/class/lcd//contrast +Date: April 2005 +KernelVersion: 2.6.12 +Contact: Richard Purdie +Description: + Current contrast of this LCD device. Value is between 0 and + /sys/class/lcd//max_contrast. + +What: /sys/class/lcd//max_contrast +Date: April 2005 +KernelVersion: 2.6.12 +Contact: Richard Purdie +Description: + Maximum contrast for this LCD device. -- cgit v1.2.3-70-g09d2 From 5f634c6527249275df4199a294ee9cec2f3ff3b1 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Fri, 28 Aug 2009 12:56:45 +0000 Subject: led: document sysfs interface Also fix Documentation/led-class.txt, the acceptable range of values for brightness is 0-max_brightness, not 0-255. Cc: Richard Purdie Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- Documentation/ABI/testing/sysfs-class-led | 28 ++++++++++++++++++++++++++++ Documentation/leds-class.txt | 9 +++++---- 2 files changed, 33 insertions(+), 4 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-class-led (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led new file mode 100644 index 00000000000..9e4541d71cb --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led @@ -0,0 +1,28 @@ +What: /sys/class/leds//brightness +Date: March 2006 +KernelVersion: 2.6.17 +Contact: Richard Purdie +Description: + Set the brightness of the LED. Most LEDs don't + have hardware brightness support so will just be turned on for + non-zero brightness settings. The value is between 0 and + /sys/class/leds//max_brightness. + +What: /sys/class/leds//max_brightness +Date: March 2006 +KernelVersion: 2.6.17 +Contact: Richard Purdie +Description: + Maximum brightness level for this led, default is 255 (LED_FULL). + +What: /sys/class/leds//trigger +Date: March 2006 +KernelVersion: 2.6.17 +Contact: Richard Purdie +Description: + Set the trigger for this LED. A trigger is a kernel based source + of led events. + You can change triggers in a similar manner to the way an IO + scheduler is chosen. Trigger specific parameters can appear in + /sys/class/leds/ once a given trigger is selected. + diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt index 6399557cdab..8fd5ca2ae32 100644 --- a/Documentation/leds-class.txt +++ b/Documentation/leds-class.txt @@ -1,3 +1,4 @@ + LED handling under Linux ======================== @@ -5,10 +6,10 @@ If you're reading this and thinking about keyboard leds, these are handled by the input subsystem and the led class is *not* needed. In its simplest form, the LED class just allows control of LEDs from -userspace. LEDs appear in /sys/class/leds/. The brightness file will -set the brightness of the LED (taking a value 0-255). Most LEDs don't -have hardware brightness support so will just be turned on for non-zero -brightness settings. +userspace. LEDs appear in /sys/class/leds/. The maximum brightness of the +LED is defined in max_brightness file. The brightness file will set the brightness +of the LED (taking a value 0-max_brightness). Most LEDs don't have hardware +brightness support so will just be turned on for non-zero brightness settings. The class also introduces the optional concept of an LED trigger. A trigger is a kernel based source of led events. Triggers can either be simple or -- cgit v1.2.3-70-g09d2 From 6ce2c9d9a531e8753005a25a686dafab9a5d04bb Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Fri, 28 Aug 2009 12:56:54 +0000 Subject: asus-laptop: document the module Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- Documentation/laptops/asus-laptop.txt | 258 ++++++++++++++++++++++++++++++++++ 1 file changed, 258 insertions(+) create mode 100644 Documentation/laptops/asus-laptop.txt (limited to 'Documentation') diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt new file mode 100644 index 00000000000..c1c5be84e4b --- /dev/null +++ b/Documentation/laptops/asus-laptop.txt @@ -0,0 +1,258 @@ +Asus Laptop Extras + +Version 0.1 +August 6, 2009 + +Corentin Chary +http://acpi4asus.sf.net/ + + This driver provides support for extra features of ACPI-compatible ASUS laptops. + It may also support some MEDION, JVC or VICTOR laptops (such as MEDION 9675 or + VICTOR XP7210 for example). It makes all the extra buttons generate standard + ACPI events that go through /proc/acpi/events and input events (like keyboards). + On some models adds support for changing the display brightness and output, + switching the LCD backlight on and off, and most importantly, allows you to + blink those fancy LEDs intended for reporting mail and wireless status. + +This driver supercedes the old asus_acpi driver. + +Requirements +------------ + + Kernel 2.6.X sources, configured for your computer, with ACPI support. + You also need CONFIG_INPUT and CONFIG_ACPI. + +Status +------ + + The features currently supported are the following (see below for + detailed description): + + - Fn key combinations + - Bluetooth enable and disable + - Wlan enable and disable + - GPS enable and disable + - Video output switching + - Ambient Light Sensor on and off + - LED control + - LED Display control + - LCD brightness control + - LCD on and off + + A compatibility table by model and feature is maintained on the web + site, http://acpi4asus.sf.net/. + +Usage +----- + + Try "modprobe asus_acpi". Check your dmesg (simply type dmesg). You should + see some lines like this : + + Asus Laptop Extras version 0.42 + L2D model detected. + + If it is not the output you have on your laptop, send it (and the laptop's + DSDT) to me. + + That's all, now, all the events generated by the hotkeys of your laptop + should be reported in your /proc/acpi/event entry. You can check with + "acpi_listen". + + Hotkeys are also reported as input keys (like keyboards) you can check + which key are supported using "xev" under X11. + + You can get informations on the version of your DSDT table by reading the + /sys/devices/platform/asus-laptop/infos entry. If you have a question or a + bug report to do, please include the output of this entry. + +LEDs +---- + + You can modify LEDs be echoing values to /sys/class/leds/asus::*/brightness : + echo 1 > /sys/class/leds/asus::mail/brightness + will switch the mail LED on. + You can also know if they are on/off by reading their content and use + kernel triggers like ide-disk or heartbeat. + +Backlight +--------- + + You can control lcd backlight power and brightness with + /sys/class/backlight/asus-laptop/. Brightness Values are between 0 and 15. + +Wireless devices +--------------- + + You can turn the internal Bluetooth adapter on/off with the bluetooth entry + (only on models with Bluetooth). This usually controls the associated LED. + Same for Wlan adapter. + +Display switching +----------------- + + Note: the display switching code is currently considered EXPERIMENTAL. + + Switching works for the following models: + L3800C + A2500H + L5800C + M5200N + W1000N (albeit with some glitches) + M6700R + A6JC + F3J + + Switching doesn't work for the following: + M3700N + L2X00D (locks the laptop under certain conditions) + + To switch the displays, echo values from 0 to 15 to + /sys/devices/platform/asus-laptop/display. The significance of those values + is as follows: + + +-------+-----+-----+-----+-----+-----+ + | Bin | Val | DVI | TV | CRT | LCD | + +-------+-----+-----+-----+-----+-----+ + + 0000 + 0 + + + + + + +-------+-----+-----+-----+-----+-----+ + + 0001 + 1 + + + + X + + +-------+-----+-----+-----+-----+-----+ + + 0010 + 2 + + + X + + + +-------+-----+-----+-----+-----+-----+ + + 0011 + 3 + + + X + X + + +-------+-----+-----+-----+-----+-----+ + + 0100 + 4 + + X + + + + +-------+-----+-----+-----+-----+-----+ + + 0101 + 5 + + X + + X + + +-------+-----+-----+-----+-----+-----+ + + 0110 + 6 + + X + X + + + +-------+-----+-----+-----+-----+-----+ + + 0111 + 7 + + X + X + X + + +-------+-----+-----+-----+-----+-----+ + + 1000 + 8 + X + + + + + +-------+-----+-----+-----+-----+-----+ + + 1001 + 9 + X + + + X + + +-------+-----+-----+-----+-----+-----+ + + 1010 + 10 + X + + X + + + +-------+-----+-----+-----+-----+-----+ + + 1011 + 11 + X + + X + X + + +-------+-----+-----+-----+-----+-----+ + + 1100 + 12 + X + X + + + + +-------+-----+-----+-----+-----+-----+ + + 1101 + 13 + X + X + + X + + +-------+-----+-----+-----+-----+-----+ + + 1110 + 14 + X + X + X + + + +-------+-----+-----+-----+-----+-----+ + + 1111 + 15 + X + X + X + X + + +-------+-----+-----+-----+-----+-----+ + + In most cases, the appropriate displays must be plugged in for the above + combinations to work. TV-Out may need to be initialized at boot time. + + Debugging: + 1) Check whether the Fn+F8 key: + a) does not lock the laptop (try disabling CONFIG_X86_UP_APIC or boot with + noapic / nolapic if it does) + b) generates events (0x6n, where n is the value corresponding to the + configuration above) + c) actually works + Record the disp value at every configuration. + 2) Echo values from 0 to 15 to /sys/devices/platform/asus-laptop/display. + Record its value, note any change. If nothing changes, try a broader range, + up to 65535. + 3) Send ANY output (both positive and negative reports are needed, unless your + machine is already listed above) to the acpi4asus-user mailing list. + + Note: on some machines (e.g. L3C), after the module has been loaded, only 0x6n + events are generated and no actual switching occurs. In such a case, a line + like: + + echo $((10#$arg-60)) > /sys/devices/platform/asus-laptop/display + + will usually do the trick ($arg is the 0000006n-like event passed to acpid). + + Note: there is currently no reliable way to read display status on xxN + (Centrino) models. + +LED display +----------- + + Some models like the W1N have a LED display that can be used to display + several informations. + + LED display works for the following models: + W1000N + W1J + + To control the LED display, use the following : + + echo 0x0T000DDD > /sys/devices/platform/asus-laptop/ + + where T control the 3 letters display, and DDD the 3 digits display, + according to the tables below. + + DDD (digits) + 000 to 999 = display digits + AAA = --- + BBB to FFF = turn-off + + T (type) + 0 = off + 1 = dvd + 2 = vcd + 3 = mp3 + 4 = cd + 5 = tv + 6 = cpu + 7 = vol + + For example "echo 0x01000001 >/sys/devices/platform/asus-laptop/ledd" + would display "DVD001". + +Driver options: +--------------- + + Options can be passed to the asus-laptop driver using the standard + module argument syntax (= when passing the option to the + module or asus-laptop.= on the kernel boot line when + asus-laptop is statically linked into the kernel). + + wapf: WAPF defines the behavior of the Fn+Fx wlan key + The significance of values is yet to be found, but + most of the time: + - 0x0 should do nothing + - 0x1 should allow to control the device with Fn+Fx key. + - 0x4 should send an ACPI event (0x88) while pressing the Fn+Fx key + - 0x5 like 0x1 or 0x4 + + The default value is 0x1. + +Unsupported models +------------------ + + These models will never be supported by this module, as they use a completely + different mechanism to handle LEDs and extra stuff (meaning we have no clue + how it works): + + - ASUS A1300 (A1B), A1370D + - ASUS L7300G + - ASUS L8400 + +Patches, Errors, Questions: +-------------------------- + + I appreciate any success or failure + reports, especially if they add to or correct the compatibility table. + Please include the following information in your report: + + - Asus model name + - a copy of your ACPI tables, using the "acpidump" utility + - a copy of /sys/devices/platform/asus-laptop/infos + - which driver features work and which don't + - the observed behavior of non-working features + + Any other comments or patches are also more than welcome. + + acpi4asus-user@lists.sourceforge.net + http://sourceforge.net/projects/acpi4asus + -- cgit v1.2.3-70-g09d2 From b09f5fecf8b97c9de7add3e2eb0cfeb91ef28dbb Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Fri, 28 Aug 2009 12:56:55 +0000 Subject: asus-laptop: document sysfs interface Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- .../ABI/testing/sysfs-platform-asus-laptop | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-platform-asus-laptop (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop new file mode 100644 index 00000000000..a1cb660c50c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop @@ -0,0 +1,52 @@ +What: /sys/devices/platform/asus-laptop/display +Date: January 2007 +KernelVersion: 2.6.20 +Contact: "Corentin Chary" +Description: + This file allows display switching. The value + is composed by 4 bits and defined as follow: + 4321 + |||`- LCD + ||`-- CRT + |`--- TV + `---- DVI + Ex: - 0 (0000b) means no display + - 3 (0011b) CRT+LCD. + +What: /sys/devices/platform/asus-laptop/gps +Date: January 2007 +KernelVersion: 2.6.20 +Contact: "Corentin Chary" +Description: + Control the gps device. 1 means on, 0 means off. +Users: Lapsus + +What: /sys/devices/platform/asus-laptop/ledd +Date: January 2007 +KernelVersion: 2.6.20 +Contact: "Corentin Chary" +Description: + Some models like the W1N have a LED display that can be + used to display several informations. + To control the LED display, use the following : + echo 0x0T000DDD > /sys/devices/platform/asus-laptop/ + where T control the 3 letters display, and DDD the 3 digits display. + The DDD table can be found in Documentation/laptops/asus-laptop.txt + +What: /sys/devices/platform/asus-laptop/bluetooth +Date: January 2007 +KernelVersion: 2.6.20 +Contact: "Corentin Chary" +Description: + Control the bluetooth device. 1 means on, 0 means off. + This may control the led, the device or both. +Users: Lapsus + +What: /sys/devices/platform/asus-laptop/wlan +Date: January 2007 +KernelVersion: 2.6.20 +Contact: "Corentin Chary" +Description: + Control the bluetooth device. 1 means on, 0 means off. + This may control the led, the device or both. +Users: Lapsus -- cgit v1.2.3-70-g09d2 From 162bc7ab01a00eba1c5d614e64a51e1268ee3f96 Mon Sep 17 00:00:00 2001 From: "Pan, Jacob jun" Date: Fri, 28 Aug 2009 14:52:47 -0700 Subject: x86: Add hardware_subarch ID for Moorestown x86 bootprotocol 2.07 has introduced hardware_subarch ID in the boot parameters provided by FW. We use it to identify Moorestown platforms. [ tglx: Cleanup and paravirt fix ] Signed-off-by: Jacob Pan Signed-off-by: Thomas Gleixner --- Documentation/x86/boot.txt | 1 + arch/x86/include/asm/bootparam.h | 10 ++++++++++ arch/x86/kernel/head_32.S | 1 + 3 files changed, 12 insertions(+) (limited to 'Documentation') diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 8da3a795083..30b43e1b269 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -599,6 +599,7 @@ Protocol: 2.07+ 0x00000000 The default x86/PC environment 0x00000001 lguest 0x00000002 Xen + 0x00000003 Moorestown MID Field name: hardware_subarch_data Type: write (subarch-dependent) diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index 1724e8de317..283a9a1b3ef 100644 --- a/arch/x86/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h @@ -109,4 +109,14 @@ struct boot_params { __u8 _pad9[276]; /* 0xeec */ } __attribute__((packed)); +enum { + X86_SUBARCH_PC = 0, + X86_SUBARCH_LGUEST, + X86_SUBARCH_XEN, + X86_SUBARCH_MRST, + X86_NR_SUBARCHS, +}; + + + #endif /* _ASM_X86_BOOTPARAM_H */ diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index cc827ac9e8d..304e3f3d747 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -157,6 +157,7 @@ subarch_entries: .long default_entry /* normal x86/PC */ .long lguest_entry /* lguest hypervisor */ .long xen_entry /* Xen hypervisor */ + .long default_entry /* Moorestown MID */ num_subarch_entries = (. - subarch_entries) / 4 .previous #endif /* CONFIG_PARAVIRT */ -- cgit v1.2.3-70-g09d2 From ff55df53dfdd338906c8ba9d1f4a759b86b869d5 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 31 Aug 2009 14:16:57 -0700 Subject: x86, msr: Export the register-setting MSR functions via /dev/*/msr Make it possible to access the all-register-setting/getting MSR functions via the MSR driver. This is implemented as an ioctl() on the standard MSR device node. Signed-off-by: H. Peter Anvin Cc: Borislav Petkov --- Documentation/ioctl/ioctl-number.txt | 1 + arch/x86/include/asm/msr.h | 10 +++++-- arch/x86/kernel/msr.c | 51 ++++++++++++++++++++++++++++++++++++ 3 files changed, 60 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index dbea4f95fc8..1c058b552e9 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -121,6 +121,7 @@ Code Seq# Include File Comments 'c' 00-7F linux/comstats.h conflict! 'c' 00-7F linux/coda.h conflict! 'c' 80-9F arch/s390/include/asm/chsc.h +'c' A0-AF arch/x86/include/asm/msr.h 'd' 00-FF linux/char/drm/drm/h conflict! 'd' F0-FF linux/digi1.h 'e' all linux/digi1.h conflict! diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index 8e56712aa17..7e2b6ba962f 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -3,10 +3,16 @@ #include -#ifdef __KERNEL__ #ifndef __ASSEMBLY__ #include +#include + +#define X86_IOC_RDMSR_REGS _IOWR('c', 0xA0, __u32[8]) +#define X86_IOC_WRMSR_REGS _IOWR('c', 0xA1, __u32[8]) + +#ifdef __KERNEL__ + #include #include #include @@ -286,6 +292,6 @@ static inline int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]) return wrmsr_safe_regs(regs); } #endif /* CONFIG_SMP */ -#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ #endif /* _ASM_X86_MSR_H */ diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 2cfbb4b2c42..7dd95009417 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -1,6 +1,7 @@ /* ----------------------------------------------------------------------- * * * Copyright 2000-2008 H. Peter Anvin - All Rights Reserved + * Copyright 2009 Intel Corporation; author: H. Peter Anvin * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -121,6 +122,54 @@ static ssize_t msr_write(struct file *file, const char __user *buf, return bytes ? bytes : err; } +static long msr_ioctl(struct file *file, unsigned int ioc, unsigned long arg) +{ + u32 __user *uregs = (u32 __user *)arg; + u32 regs[8]; + int cpu = iminor(file->f_path.dentry->d_inode); + int err; + + switch (ioc) { + case X86_IOC_RDMSR_REGS: + if (!(file->f_mode & FMODE_READ)) { + err = -EBADF; + break; + } + if (copy_from_user(®s, uregs, sizeof regs)) { + err = -EFAULT; + break; + } + err = rdmsr_safe_regs_on_cpu(cpu, regs); + if (err) + break; + if (copy_to_user(uregs, ®s, sizeof regs)) + err = -EFAULT; + break; + + case X86_IOC_WRMSR_REGS: + if (!(file->f_mode & FMODE_WRITE)) { + err = -EBADF; + break; + } + if (copy_from_user(®s, uregs, sizeof regs)) { + err = -EFAULT; + break; + } + err = wrmsr_safe_regs_on_cpu(cpu, regs); + if (err) + break; + if (copy_to_user(uregs, ®s, sizeof regs)) + err = -EFAULT; + break; + + default: + err = -ENOTTY; + break; + } + + return err; +} + static int msr_open(struct inode *inode, struct file *file) { unsigned int cpu = iminor(file->f_path.dentry->d_inode); @@ -151,6 +200,8 @@ static const struct file_operations msr_fops = { .read = msr_read, .write = msr_write, .open = msr_open, + .unlocked_ioctl = msr_ioctl, + .compat_ioctl = msr_ioctl, }; static int __cpuinit msr_device_create(int cpu) -- cgit v1.2.3-70-g09d2 From 1e1030dccb1084c8a38976d3656aab1d50d762da Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 1 Sep 2009 17:38:32 +0900 Subject: sh: nmi_debug support. This implements support for NMI debugging that was shamelessly copied from the avr32 port. A bit of special magic is needed in the interrupt exception path given that the NMI exception handler is stubbed in to the regular exception handling table despite being reported in INTEVT. So we mangle the lookup and kick off an EXPEVT-style exception dispatch from the INTEVT path for exceptions that do_IRQ() has no chance of handling. As a result, we also drop the evt2irq() conversion from the do_IRQ() path and just do it in assembly. Signed-off-by: Paul Mundt --- Documentation/kernel-parameters.txt | 2 +- arch/sh/include/asm/kdebug.h | 1 + arch/sh/include/asm/system.h | 2 +- arch/sh/kernel/Makefile | 7 ++-- arch/sh/kernel/cpu/sh3/entry.S | 26 +++++++++++++ arch/sh/kernel/cpu/sh3/ex.S | 4 +- arch/sh/kernel/irq.c | 2 +- arch/sh/kernel/nmi_debug.c | 77 +++++++++++++++++++++++++++++++++++++ arch/sh/kernel/traps.c | 21 ++++++++++ 9 files changed, 133 insertions(+), 9 deletions(-) create mode 100644 arch/sh/kernel/nmi_debug.c (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 7936b801fe6..76c355214dc 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1514,7 +1514,7 @@ and is between 256 and 4096 characters. It is defined in the file of returning the full 64-bit number. The default is to return 64-bit inode numbers. - nmi_debug= [KNL,AVR32] Specify one or more actions to take + nmi_debug= [KNL,AVR32,SH] Specify one or more actions to take when a NMI is triggered. Format: [state][,regs][,debounce][,die] diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h index 0b9f896f203..985219f9759 100644 --- a/arch/sh/include/asm/kdebug.h +++ b/arch/sh/include/asm/kdebug.h @@ -4,6 +4,7 @@ /* Grossly misnamed. */ enum die_val { DIE_TRAP, + DIE_NMI, DIE_OOPS, }; diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h index 6b272238a46..b5c5acdc8c0 100644 --- a/arch/sh/include/asm/system.h +++ b/arch/sh/include/asm/system.h @@ -169,7 +169,7 @@ BUILD_TRAP_HANDLER(breakpoint); BUILD_TRAP_HANDLER(singlestep); BUILD_TRAP_HANDLER(fpu_error); BUILD_TRAP_HANDLER(fpu_state_restore); -BUILD_TRAP_HANDLER(unwinder); +BUILD_TRAP_HANDLER(nmi); #ifdef CONFIG_BUG extern void handle_BUG(struct pt_regs *); diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index f37cf02ad9b..a2d0a40f384 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -10,9 +10,10 @@ CFLAGS_REMOVE_ftrace.o = -pg endif obj-y := debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o \ - machvec.o process_$(BITS).o ptrace_$(BITS).o setup.o \ - signal_$(BITS).o sys_sh.o sys_sh$(BITS).o syscalls_$(BITS).o \ - time.o topology.o traps.o traps_$(BITS).o unwinder.o + machvec.o nmi_debug.o process_$(BITS).o ptrace_$(BITS).o \ + setup.o signal_$(BITS).o sys_sh.o sys_sh$(BITS).o \ + syscalls_$(BITS).o time.o topology.o traps.o \ + traps_$(BITS).o unwinder.o obj-y += cpu/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index aebd33d18ff..d1142d36592 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -532,7 +532,33 @@ ENTRY(handle_interrupt) mov.l 2f, r4 mov.l 3f, r9 mov.l @r4, r4 ! pass INTEVT vector as arg0 + + shlr2 r4 + shlr r4 + mov r4, r0 ! save vector->jmp table offset for later + + shlr2 r4 ! vector to IRQ# conversion + add #-0x10, r4 + + cmp/pz r4 ! is it a valid IRQ? + bt 10f + + /* + * We got here as a result of taking the INTEVT path for something + * that isn't a valid hard IRQ, therefore we bypass the do_IRQ() + * path and special case the event dispatch instead. This is the + * expected path for the NMI (and any other brilliantly implemented + * exception), which effectively wants regular exception dispatch + * but is unfortunately reported through INTEVT rather than + * EXPEVT. Grr. + */ + mov.l 6f, r9 + mov.l @(r0, r9), r9 jmp @r9 + mov r15, r8 ! trap handlers take saved regs in r8 + +10: + jmp @r9 ! Off to do_IRQ() we go. mov r15, r5 ! pass saved registers as arg1 ENTRY(exception_none) diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index e5a0de39a2d..46610c35c23 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -48,9 +48,7 @@ ENTRY(exception_handling_table) .long system_call ! Unconditional Trap /* 160 */ .long exception_error ! reserved_instruction (filled by trap_init) /* 180 */ .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/ -ENTRY(nmi_slot) - .long kgdb_handle_exception /* 1C0 */ ! Allow trap to debugger -ENTRY(user_break_point_trap) + .long nmi_trap_handler /* 1C0 */ ! Allow trap to debugger .long break_point_trap /* 1E0 */ /* diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index d1053392e28..60f8af4497c 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -114,7 +114,7 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs) #endif irq_enter(); - irq = irq_demux(evt2irq(irq)); + irq = irq_demux(irq); #ifdef CONFIG_IRQSTACKS curctx = (union irq_ctx *)current_thread_info(); diff --git a/arch/sh/kernel/nmi_debug.c b/arch/sh/kernel/nmi_debug.c new file mode 100644 index 00000000000..ff0abbd1e65 --- /dev/null +++ b/arch/sh/kernel/nmi_debug.c @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +enum nmi_action { + NMI_SHOW_STATE = 1 << 0, + NMI_SHOW_REGS = 1 << 1, + NMI_DIE = 1 << 2, + NMI_DEBOUNCE = 1 << 3, +}; + +static unsigned long nmi_actions; + +static int nmi_debug_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + struct die_args *args = data; + + if (likely(val != DIE_NMI)) + return NOTIFY_DONE; + + if (nmi_actions & NMI_SHOW_STATE) + show_state(); + if (nmi_actions & NMI_SHOW_REGS) + show_regs(args->regs); + if (nmi_actions & NMI_DEBOUNCE) + mdelay(10); + if (nmi_actions & NMI_DIE) + return NOTIFY_BAD; + + return NOTIFY_OK; +} + +static struct notifier_block nmi_debug_nb = { + .notifier_call = nmi_debug_notify, +}; + +static int __init nmi_debug_setup(char *str) +{ + char *p, *sep; + + register_die_notifier(&nmi_debug_nb); + + if (*str != '=') + return 0; + + for (p = str + 1; *p; p = sep + 1) { + sep = strchr(p, ','); + if (sep) + *sep = 0; + if (strcmp(p, "state") == 0) + nmi_actions |= NMI_SHOW_STATE; + else if (strcmp(p, "regs") == 0) + nmi_actions |= NMI_SHOW_REGS; + else if (strcmp(p, "debounce") == 0) + nmi_actions |= NMI_DEBOUNCE; + else if (strcmp(p, "die") == 0) + nmi_actions |= NMI_DIE; + else + printk(KERN_WARNING "NMI: Unrecognized action `%s'\n", + p); + if (!sep) + break; + } + + return 0; +} +__setup("nmi_debug", nmi_debug_setup); diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index f69bd968fcc..a8396f36bd1 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -5,6 +5,7 @@ #include #include #include +#include #include #include @@ -91,3 +92,23 @@ BUILD_TRAP_HANDLER(bug) force_sig(SIGTRAP, current); } + +BUILD_TRAP_HANDLER(nmi) +{ + TRAP_HANDLER_DECL; + + nmi_enter(); + + switch (notify_die(DIE_NMI, "NMI", regs, 0, vec & 0xff, SIGINT)) { + case NOTIFY_OK: + case NOTIFY_STOP: + break; + case NOTIFY_BAD: + die("Fatal Non-Maskable Interrupt", regs, SIGINT); + default: + printk(KERN_ALERT "Got NMI, but nobody cared. Ignoring...\n"); + break; + } + + nmi_exit(); +} -- cgit v1.2.3-70-g09d2 From da470db16c703d7f9617c366a36c6670f89a9830 Mon Sep 17 00:00:00 2001 From: Naga Chumbalkar Date: Mon, 29 Jun 2009 19:53:41 +0000 Subject: [CPUFREQ] update Doc for cpuinfo_cur_freq and scaling_cur_freq I think the way "cpuinfo_cur_info" and "scaling_cur_info" are defined under ./Documentation/cpu-freq/user-guide.txt can be enhanced. Currently, they are both defined the same way: "Current speed/frequency" of the CPU, in KHz". Below is a patch that distinguishes one from the other. Regards, - naga - ----------------------------------------- Update description for "cpuinfo_cur_freq" and "scaling_cur_freq". Some of the wording is drawn from comments found in ./drivers/cpufreq/cpufreq.c: cpufreq_out_of_sync(): * @old_freq: CPU frequency the kernel thinks the CPU runs at * @new_freq: CPU frequency the CPU actually runs at Signed-off-by: Naga Chumbalkar Signed-off-by: Dave Jones --- Documentation/cpu-freq/user-guide.txt | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt index 5d5f5fadd1c..2a5b850847c 100644 --- a/Documentation/cpu-freq/user-guide.txt +++ b/Documentation/cpu-freq/user-guide.txt @@ -176,7 +176,9 @@ scaling_governor, and by "echoing" the name of another work on some specific architectures or processors. -cpuinfo_cur_freq : Current speed of the CPU, in KHz. +cpuinfo_cur_freq : Current frequency of the CPU as obtained from + the hardware, in KHz. This is the frequency + the CPU actually runs at. scaling_available_frequencies : List of available frequencies, in KHz. @@ -196,7 +198,10 @@ related_cpus : List of CPUs that need some sort of frequency scaling_driver : Hardware driver for cpufreq. -scaling_cur_freq : Current frequency of the CPU, in KHz. +scaling_cur_freq : Current frequency of the CPU as determined by + the governor and cpufreq core, in KHz. This is + the frequency the kernel thinks the CPU runs + at. If you have selected the "userspace" governor which allows you to set the CPU operating frequency to a specific value, you can read out -- cgit v1.2.3-70-g09d2 From 051d9fbdd1d1ec85ea18ba20581234cf23f1c217 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Jul 2009 11:46:12 +0900 Subject: libata: remove spindown skipping and warning This was a hack to give userland shutdown tools time to drop manual spindown. All popular distros updated quite some time ago and the due is well passed. Drop it. Signed-off-by: Tejun Heo Cc: Jaswinder Singh Rajput Signed-off-by: Jeff Garzik --- Documentation/feature-removal-schedule.txt | 18 ----------- drivers/ata/libata-scsi.c | 51 ------------------------------ include/linux/libata.h | 1 - 3 files changed, 70 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 09e031c5588..b3b62903f08 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -206,24 +206,6 @@ Who: Len Brown --------------------------- -What: libata spindown skipping and warning -When: Dec 2008 -Why: Some halt(8) implementations synchronize caches for and spin - down libata disks because libata didn't use to spin down disk on - system halt (only synchronized caches). - Spin down on system halt is now implemented. sysfs node - /sys/class/scsi_disk/h:c:i:l/manage_start_stop is present if - spin down support is available. - Because issuing spin down command to an already spun down disk - makes some disks spin up just to spin down again, libata tracks - device spindown status to skip the extra spindown command and - warn about it. - This is to give userspace tools the time to get updated and will - be removed after userspace is reasonably updated. -Who: Tejun Heo - ---------------------------- - What: i386/x86_64 bzImage symlinks When: April 2010 diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d0dfeef55db..de3a0050760 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1257,23 +1257,6 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) return queue_depth; } -/* XXX: for spindown warning */ -static void ata_delayed_done_timerfn(unsigned long arg) -{ - struct scsi_cmnd *scmd = (void *)arg; - - scmd->scsi_done(scmd); -} - -/* XXX: for spindown warning */ -static void ata_delayed_done(struct scsi_cmnd *scmd) -{ - static struct timer_list timer; - - setup_timer(&timer, ata_delayed_done_timerfn, (unsigned long)scmd); - mod_timer(&timer, jiffies + 5 * HZ); -} - /** * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command * @qc: Storage for translated ATA taskfile @@ -1338,32 +1321,6 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) system_entering_hibernation()) goto skip; - /* XXX: This is for backward compatibility, will be - * removed. Read Documentation/feature-removal-schedule.txt - * for more info. - */ - if ((qc->dev->flags & ATA_DFLAG_SPUNDOWN) && - (system_state == SYSTEM_HALT || - system_state == SYSTEM_POWER_OFF)) { - static unsigned long warned; - - if (!test_and_set_bit(0, &warned)) { - ata_dev_printk(qc->dev, KERN_WARNING, - "DISK MIGHT NOT BE SPUN DOWN PROPERLY. " - "UPDATE SHUTDOWN UTILITY\n"); - ata_dev_printk(qc->dev, KERN_WARNING, - "For more info, visit " - "http://linux-ata.org/shutdown.html\n"); - - /* ->scsi_done is not used, use it for - * delayed completion. - */ - scmd->scsi_done = qc->scsidone; - qc->scsidone = ata_delayed_done; - } - goto skip; - } - /* Issue ATA STANDBY IMMEDIATE command */ tf->command = ATA_CMD_STANDBYNOW1; } @@ -1764,14 +1721,6 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) } } - /* XXX: track spindown state for spindown skipping and warning */ - if (unlikely(qc->tf.command == ATA_CMD_STANDBY || - qc->tf.command == ATA_CMD_STANDBYNOW1)) - qc->dev->flags |= ATA_DFLAG_SPUNDOWN; - else if (likely(system_state != SYSTEM_HALT && - system_state != SYSTEM_POWER_OFF)) - qc->dev->flags &= ~ATA_DFLAG_SPUNDOWN; - if (need_sense && !ap->ops->error_handler) ata_dump_status(ap->print_id, &qc->result_tf); diff --git a/include/linux/libata.h b/include/linux/libata.h index d3f7cab4873..76319bf03e3 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -143,7 +143,6 @@ enum { ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */ ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */ - ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */ ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */ ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */ ATA_DFLAG_NO_UNLOAD = (1 << 17), /* device doesn't support unload */ -- cgit v1.2.3-70-g09d2 From 5d7892298a819743b3892df08bb496992fe85951 Mon Sep 17 00:00:00 2001 From: Damian Lukowski Date: Tue, 1 Sep 2009 10:24:04 +0000 Subject: RTO connection timeout: sysctl documentation update This patch updates the sysctl documentation concerning the interpretation of tcp_retries{1,2} and tcp_orphan_retries. Signed-off-by: Damian Lukowski Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 37 ++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 8be76235fe6..4e9c6d7b4ef 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -311,9 +311,12 @@ tcp_no_metrics_save - BOOLEAN connections. tcp_orphan_retries - INTEGER - How may times to retry before killing TCP connection, closed - by our side. Default value 7 corresponds to ~50sec-16min - depending on RTO. If you machine is loaded WEB server, + This value influences the timeout of a locally closed TCP connection, + when RTO retransmissions remain unacknowledged. + See tcp_retries2 for more details. + + The default value is 7. + If your machine is a loaded WEB server, you should think about lowering this value, such sockets may consume significant resources. Cf. tcp_max_orphans. @@ -327,16 +330,28 @@ tcp_retrans_collapse - BOOLEAN certain TCP stacks. tcp_retries1 - INTEGER - How many times to retry before deciding that something is wrong - and it is necessary to report this suspicion to network layer. - Minimal RFC value is 3, it is default, which corresponds - to ~3sec-8min depending on RTO. + This value influences the time, after which TCP decides, that + something is wrong due to unacknowledged RTO retransmissions, + and reports this suspicion to the network layer. + See tcp_retries2 for more details. + + RFC 1122 recommends at least 3 retransmissions, which is the + default. tcp_retries2 - INTEGER - How may times to retry before killing alive TCP connection. - RFC1122 says that the limit should be longer than 100 sec. - It is too small number. Default value 15 corresponds to ~13-30min - depending on RTO. + This value influences the timeout of an alive TCP connection, + when RTO retransmissions remain unacknowledged. + Given a value of N, a hypothetical TCP connection following + exponential backoff with an initial RTO of TCP_RTO_MIN would + retransmit N times before killing the connection at the (N+1)th RTO. + + The default value of 15 yields a hypothetical timeout of 924.6 + seconds and is a lower bound for the effective timeout. + TCP will effectively time out at the first RTO which exceeds the + hypothetical timeout. + + RFC 1122 recommends at least 100 seconds for the timeout, + which corresponds to a value of at least 8. tcp_rfc1337 - BOOLEAN If set, the TCP stack behaves conforming to RFC1337. If unset, -- cgit v1.2.3-70-g09d2 From 842ae63800bc2be62085d7ce5b3a2298c014d37a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 2 Sep 2009 07:43:08 +0200 Subject: ALSA: hda - Add support of Alienware M17x laptop Added the quirk for Alienware M17x with IDT 92HD73* codec chip. It has two HP and one line-out jack, one mic jack, a built-in speaker and a built-in mic. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_sigmatel.c | 27 +++++++++++++++++++++++++++ 2 files changed, 28 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index abffd411232..32d8cc05d15 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -380,6 +380,7 @@ STAC92HD73* dell-m6-dmic Dell desktops/laptops with digital mics dell-m6 Dell desktops/laptops with both type of mics dell-eq Dell desktops/laptops + alienware Alienware M17x auto BIOS setup (default) STAC92HD83* diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 83a338b9c08..e31e53dc696 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -83,6 +83,7 @@ enum { STAC_DELL_M6_DMIC, STAC_DELL_M6_BOTH, STAC_DELL_EQ, + STAC_ALIENWARE_M17X, STAC_92HD73XX_MODELS }; @@ -1513,12 +1514,20 @@ static unsigned int dell_m6_pin_configs[13] = { 0x4f0000f0, }; +static unsigned int alienware_m17x_pin_configs[13] = { + 0x0321101f, 0x0321101f, 0x03a11020, 0x03014020, + 0x90170110, 0x4f0000f0, 0x4f0000f0, 0x4f0000f0, + 0x4f0000f0, 0x90a60160, 0x4f0000f0, 0x4f0000f0, + 0x904601b0, +}; + static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = { [STAC_92HD73XX_REF] = ref92hd73xx_pin_configs, [STAC_DELL_M6_AMIC] = dell_m6_pin_configs, [STAC_DELL_M6_DMIC] = dell_m6_pin_configs, [STAC_DELL_M6_BOTH] = dell_m6_pin_configs, [STAC_DELL_EQ] = dell_m6_pin_configs, + [STAC_ALIENWARE_M17X] = alienware_m17x_pin_configs, }; static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { @@ -1530,6 +1539,7 @@ static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { [STAC_DELL_M6_DMIC] = "dell-m6-dmic", [STAC_DELL_M6_BOTH] = "dell-m6", [STAC_DELL_EQ] = "dell-eq", + [STAC_ALIENWARE_M17X] = "alienware", }; static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { @@ -1567,6 +1577,12 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { {} /* terminator */ }; +static struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = { + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a1, + "Alienware M17x", STAC_ALIENWARE_M17X), + {} /* terminator */ +}; + static unsigned int ref92hd83xxx_pin_configs[10] = { 0x02214030, 0x02211010, 0x02a19020, 0x02170130, 0x01014050, 0x01819040, 0x01014020, 0x90a3014e, @@ -4909,6 +4925,12 @@ static int patch_stac92hd73xx(struct hda_codec *codec) STAC_92HD73XX_MODELS, stac92hd73xx_models, stac92hd73xx_cfg_tbl); + /* check codec subsystem id if not found */ + if (spec->board_config < 0) + spec->board_config = + snd_hda_check_board_codec_sid_config(codec, + STAC_92HD73XX_MODELS, stac92hd73xx_models, + stac92hd73xx_codec_id_cfg_tbl); again: if (spec->board_config < 0) snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", @@ -4983,6 +5005,11 @@ again: break; } break; + case STAC_ALIENWARE_M17X: + spec->num_dmics = STAC92HD73XX_NUM_DMICS; + spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids); + spec->eapd_switch = 0; + break; default: spec->num_dmics = STAC92HD73XX_NUM_DMICS; spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids); -- cgit v1.2.3-70-g09d2 From 5d135440faf7db8d566de0c6fab36b16cf9cfc3b Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 2 Sep 2009 09:14:00 +0100 Subject: KEYS: Add garbage collection for dead, revoked and expired keys. [try #6] Add garbage collection for dead, revoked and expired keys. This involved erasing all links to such keys from keyrings that point to them. At that point, the key will be deleted in the normal manner. Keyrings from which garbage collection occurs are shrunk and their quota consumption reduced as appropriate. Dead keys (for which the key type has been removed) will be garbage collected immediately. Revoked and expired keys will hang around for a number of seconds, as set in /proc/sys/kernel/keys/gc_delay before being automatically removed. The default is 5 minutes. Signed-off-by: David Howells Signed-off-by: James Morris --- Documentation/keys.txt | 19 ++++- include/linux/key.h | 5 +- security/keys/Makefile | 1 + security/keys/gc.c | 193 +++++++++++++++++++++++++++++++++++++++++++++++ security/keys/internal.h | 4 + security/keys/key.c | 14 ++++ security/keys/keyctl.c | 1 + security/keys/keyring.c | 85 +++++++++++++++++++++ security/keys/sysctl.c | 28 ++++++- 9 files changed, 344 insertions(+), 6 deletions(-) create mode 100644 security/keys/gc.c (limited to 'Documentation') diff --git a/Documentation/keys.txt b/Documentation/keys.txt index b56aacc1fff..203487e9b1d 100644 --- a/Documentation/keys.txt +++ b/Documentation/keys.txt @@ -26,7 +26,7 @@ This document has the following sections: - Notes on accessing payload contents - Defining a key type - Request-key callback service - - Key access filesystem + - Garbage collection ============ @@ -113,6 +113,9 @@ Each key has a number of attributes: (*) Dead. The key's type was unregistered, and so the key is now useless. +Keys in the last three states are subject to garbage collection. See the +section on "Garbage collection". + ==================== KEY SERVICE OVERVIEW @@ -1231,3 +1234,17 @@ by executing: In this case, the program isn't required to actually attach the key to a ring; the rings are provided for reference. + + +================== +GARBAGE COLLECTION +================== + +Dead keys (for which the type has been removed) will be automatically unlinked +from those keyrings that point to them and deleted as soon as possible by a +background garbage collector. + +Similarly, revoked and expired keys will be garbage collected, but only after a +certain amount of time has passed. This time is set as a number of seconds in: + + /proc/sys/kernel/keys/gc_delay diff --git a/include/linux/key.h b/include/linux/key.h index e544f466d69..33e0165de10 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -129,7 +129,10 @@ struct key { struct rw_semaphore sem; /* change vs change sem */ struct key_user *user; /* owner of this key */ void *security; /* security data for this key */ - time_t expiry; /* time at which key expires (or 0) */ + union { + time_t expiry; /* time at which key expires (or 0) */ + time_t revoked_at; /* time at which key was revoked */ + }; uid_t uid; gid_t gid; key_perm_t perm; /* access permissions */ diff --git a/security/keys/Makefile b/security/keys/Makefile index 747a464943a..74d5447d7df 100644 --- a/security/keys/Makefile +++ b/security/keys/Makefile @@ -3,6 +3,7 @@ # obj-y := \ + gc.o \ key.o \ keyring.o \ keyctl.o \ diff --git a/security/keys/gc.c b/security/keys/gc.c new file mode 100644 index 00000000000..44adc325e15 --- /dev/null +++ b/security/keys/gc.c @@ -0,0 +1,193 @@ +/* Key garbage collector + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include +#include +#include "internal.h" + +/* + * Delay between key revocation/expiry in seconds + */ +unsigned key_gc_delay = 5 * 60; + +/* + * Reaper + */ +static void key_gc_timer_func(unsigned long); +static void key_garbage_collector(struct work_struct *); +static DEFINE_TIMER(key_gc_timer, key_gc_timer_func, 0, 0); +static DECLARE_WORK(key_gc_work, key_garbage_collector); +static key_serial_t key_gc_cursor; /* the last key the gc considered */ +static unsigned long key_gc_executing; +static time_t key_gc_next_run = LONG_MAX; + +/* + * Schedule a garbage collection run + * - precision isn't particularly important + */ +void key_schedule_gc(time_t gc_at) +{ + unsigned long expires; + time_t now = current_kernel_time().tv_sec; + + kenter("%ld", gc_at - now); + + gc_at += key_gc_delay; + + if (now >= gc_at) { + schedule_work(&key_gc_work); + } else if (gc_at < key_gc_next_run) { + expires = jiffies + (gc_at - now) * HZ; + mod_timer(&key_gc_timer, expires); + } +} + +/* + * The garbage collector timer kicked off + */ +static void key_gc_timer_func(unsigned long data) +{ + kenter(""); + key_gc_next_run = LONG_MAX; + schedule_work(&key_gc_work); +} + +/* + * Garbage collect pointers from a keyring + * - return true if we altered the keyring + */ +static bool key_gc_keyring(struct key *keyring, time_t limit) +{ + struct keyring_list *klist; + struct key *key; + int loop; + + kenter("%x", key_serial(keyring)); + + if (test_bit(KEY_FLAG_REVOKED, &keyring->flags)) + goto dont_gc; + + /* scan the keyring looking for dead keys */ + klist = rcu_dereference(keyring->payload.subscriptions); + if (!klist) + goto dont_gc; + + for (loop = klist->nkeys - 1; loop >= 0; loop--) { + key = klist->keys[loop]; + if (test_bit(KEY_FLAG_DEAD, &key->flags) || + (key->expiry > 0 && key->expiry <= limit)) + goto do_gc; + } + +dont_gc: + kleave(" = false"); + return false; + +do_gc: + key_gc_cursor = keyring->serial; + key_get(keyring); + spin_unlock(&key_serial_lock); + keyring_gc(keyring, limit); + key_put(keyring); + kleave(" = true"); + return true; +} + +/* + * Garbage collector for keys + * - this involves scanning the keyrings for dead, expired and revoked keys + * that have overstayed their welcome + */ +static void key_garbage_collector(struct work_struct *work) +{ + struct rb_node *rb; + key_serial_t cursor; + struct key *key, *xkey; + time_t new_timer = LONG_MAX, limit; + + kenter(""); + + if (test_and_set_bit(0, &key_gc_executing)) { + key_schedule_gc(current_kernel_time().tv_sec); + return; + } + + limit = current_kernel_time().tv_sec; + if (limit > key_gc_delay) + limit -= key_gc_delay; + else + limit = key_gc_delay; + + spin_lock(&key_serial_lock); + + if (RB_EMPTY_ROOT(&key_serial_tree)) + goto reached_the_end; + + cursor = key_gc_cursor; + if (cursor < 0) + cursor = 0; + + /* find the first key above the cursor */ + key = NULL; + rb = key_serial_tree.rb_node; + while (rb) { + xkey = rb_entry(rb, struct key, serial_node); + if (cursor < xkey->serial) { + key = xkey; + rb = rb->rb_left; + } else if (cursor > xkey->serial) { + rb = rb->rb_right; + } else { + rb = rb_next(rb); + if (!rb) + goto reached_the_end; + key = rb_entry(rb, struct key, serial_node); + break; + } + } + + if (!key) + goto reached_the_end; + + /* trawl through the keys looking for keyrings */ + for (;;) { + if (key->expiry > 0 && key->expiry < new_timer) + new_timer = key->expiry; + + if (key->type == &key_type_keyring && + key_gc_keyring(key, limit)) { + /* the gc ate our lock */ + schedule_work(&key_gc_work); + goto no_unlock; + } + + rb = rb_next(&key->serial_node); + if (!rb) { + key_gc_cursor = 0; + break; + } + key = rb_entry(rb, struct key, serial_node); + } + +out: + spin_unlock(&key_serial_lock); +no_unlock: + clear_bit(0, &key_gc_executing); + if (new_timer < LONG_MAX) + key_schedule_gc(new_timer); + + kleave(""); + return; + +reached_the_end: + key_gc_cursor = 0; + goto out; +} diff --git a/security/keys/internal.h b/security/keys/internal.h index a7252e7b2e0..fb830514c33 100644 --- a/security/keys/internal.h +++ b/security/keys/internal.h @@ -132,6 +132,10 @@ extern key_ref_t lookup_user_key(key_serial_t id, unsigned long flags, extern long join_session_keyring(const char *name); +extern unsigned key_gc_delay; +extern void keyring_gc(struct key *keyring, time_t limit); +extern void key_schedule_gc(time_t expiry_at); + /* * check to see whether permission is granted to use a key in the desired way */ diff --git a/security/keys/key.c b/security/keys/key.c index bd9d2670e9c..08531ad0f25 100644 --- a/security/keys/key.c +++ b/security/keys/key.c @@ -500,6 +500,7 @@ int key_negate_and_link(struct key *key, set_bit(KEY_FLAG_INSTANTIATED, &key->flags); now = current_kernel_time(); key->expiry = now.tv_sec + timeout; + key_schedule_gc(key->expiry); if (test_and_clear_bit(KEY_FLAG_USER_CONSTRUCT, &key->flags)) awaken = 1; @@ -888,6 +889,9 @@ EXPORT_SYMBOL(key_update); */ void key_revoke(struct key *key) { + struct timespec now; + time_t time; + key_check(key); /* make sure no one's trying to change or use the key when we mark it @@ -900,6 +904,14 @@ void key_revoke(struct key *key) key->type->revoke) key->type->revoke(key); + /* set the death time to no more than the expiry time */ + now = current_kernel_time(); + time = now.tv_sec; + if (key->revoked_at == 0 || key->revoked_at > time) { + key->revoked_at = time; + key_schedule_gc(key->revoked_at); + } + up_write(&key->sem); } /* end key_revoke() */ @@ -984,6 +996,8 @@ void unregister_key_type(struct key_type *ktype) spin_unlock(&key_serial_lock); up_write(&key_types_sem); + key_schedule_gc(0); + } /* end unregister_key_type() */ EXPORT_SYMBOL(unregister_key_type); diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index 1160b644dac..736d7800f97 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -1115,6 +1115,7 @@ long keyctl_set_timeout(key_serial_t id, unsigned timeout) } key->expiry = expiry; + key_schedule_gc(key->expiry); up_write(&key->sem); key_put(key); diff --git a/security/keys/keyring.c b/security/keys/keyring.c index 3dba81c2eba..ac977f661a7 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -1000,3 +1000,88 @@ static void keyring_revoke(struct key *keyring) } } /* end keyring_revoke() */ + +/* + * Determine whether a key is dead + */ +static bool key_is_dead(struct key *key, time_t limit) +{ + return test_bit(KEY_FLAG_DEAD, &key->flags) || + (key->expiry > 0 && key->expiry <= limit); +} + +/* + * Collect garbage from the contents of a keyring + */ +void keyring_gc(struct key *keyring, time_t limit) +{ + struct keyring_list *klist, *new; + struct key *key; + int loop, keep, max; + + kenter("%x", key_serial(keyring)); + + down_write(&keyring->sem); + + klist = keyring->payload.subscriptions; + if (!klist) + goto just_return; + + /* work out how many subscriptions we're keeping */ + keep = 0; + for (loop = klist->nkeys - 1; loop >= 0; loop--) + if (!key_is_dead(klist->keys[loop], limit)); + keep++; + + if (keep == klist->nkeys) + goto just_return; + + /* allocate a new keyring payload */ + max = roundup(keep, 4); + new = kmalloc(sizeof(struct keyring_list) + max * sizeof(struct key *), + GFP_KERNEL); + if (!new) + goto just_return; + new->maxkeys = max; + new->nkeys = 0; + new->delkey = 0; + + /* install the live keys + * - must take care as expired keys may be updated back to life + */ + keep = 0; + for (loop = klist->nkeys - 1; loop >= 0; loop--) { + key = klist->keys[loop]; + if (!key_is_dead(key, limit)) { + if (keep >= max) + goto discard_new; + new->keys[keep++] = key_get(key); + } + } + new->nkeys = keep; + + /* adjust the quota */ + key_payload_reserve(keyring, + sizeof(struct keyring_list) + + KEYQUOTA_LINK_BYTES * keep); + + if (keep == 0) { + rcu_assign_pointer(keyring->payload.subscriptions, NULL); + kfree(new); + } else { + rcu_assign_pointer(keyring->payload.subscriptions, new); + } + + up_write(&keyring->sem); + + call_rcu(&klist->rcu, keyring_clear_rcu_disposal); + kleave(" [yes]"); + return; + +discard_new: + new->nkeys = keep; + keyring_clear_rcu_disposal(&new->rcu); +just_return: + up_write(&keyring->sem); + kleave(" [no]"); +} diff --git a/security/keys/sysctl.c b/security/keys/sysctl.c index b611d493c2d..5e05dc09e2d 100644 --- a/security/keys/sysctl.c +++ b/security/keys/sysctl.c @@ -13,6 +13,8 @@ #include #include "internal.h" +static const int zero, one = 1, max = INT_MAX; + ctl_table key_sysctls[] = { { .ctl_name = CTL_UNNUMBERED, @@ -20,7 +22,9 @@ ctl_table key_sysctls[] = { .data = &key_quota_maxkeys, .maxlen = sizeof(unsigned), .mode = 0644, - .proc_handler = &proc_dointvec, + .proc_handler = &proc_dointvec_minmax, + .extra1 = (void *) &one, + .extra2 = (void *) &max, }, { .ctl_name = CTL_UNNUMBERED, @@ -28,7 +32,9 @@ ctl_table key_sysctls[] = { .data = &key_quota_maxbytes, .maxlen = sizeof(unsigned), .mode = 0644, - .proc_handler = &proc_dointvec, + .proc_handler = &proc_dointvec_minmax, + .extra1 = (void *) &one, + .extra2 = (void *) &max, }, { .ctl_name = CTL_UNNUMBERED, @@ -36,7 +42,9 @@ ctl_table key_sysctls[] = { .data = &key_quota_root_maxkeys, .maxlen = sizeof(unsigned), .mode = 0644, - .proc_handler = &proc_dointvec, + .proc_handler = &proc_dointvec_minmax, + .extra1 = (void *) &one, + .extra2 = (void *) &max, }, { .ctl_name = CTL_UNNUMBERED, @@ -44,7 +52,19 @@ ctl_table key_sysctls[] = { .data = &key_quota_root_maxbytes, .maxlen = sizeof(unsigned), .mode = 0644, - .proc_handler = &proc_dointvec, + .proc_handler = &proc_dointvec_minmax, + .extra1 = (void *) &one, + .extra2 = (void *) &max, + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "gc_delay", + .data = &key_gc_delay, + .maxlen = sizeof(unsigned), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .extra1 = (void *) &zero, + .extra2 = (void *) &max, }, { .ctl_name = 0 } }; -- cgit v1.2.3-70-g09d2 From ee18d64c1f632043a02e6f5ba5e045bb26a5465f Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 2 Sep 2009 09:14:21 +0100 Subject: KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include #include #include #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells Signed-off-by: James Morris --- Documentation/keys.txt | 20 +++++++++ arch/alpha/kernel/signal.c | 2 + arch/arm/kernel/signal.c | 2 + arch/avr32/kernel/signal.c | 2 + arch/cris/kernel/ptrace.c | 2 + arch/frv/kernel/signal.c | 2 + arch/h8300/kernel/signal.c | 2 + arch/ia64/kernel/process.c | 2 + arch/m32r/kernel/signal.c | 2 + arch/mips/kernel/signal.c | 2 + arch/mn10300/kernel/signal.c | 2 + arch/parisc/kernel/signal.c | 2 + arch/s390/kernel/signal.c | 2 + arch/sh/kernel/signal_32.c | 2 + arch/sh/kernel/signal_64.c | 2 + arch/sparc/kernel/signal_32.c | 2 + arch/sparc/kernel/signal_64.c | 3 ++ arch/x86/kernel/signal.c | 2 + include/linux/cred.h | 1 + include/linux/key.h | 3 ++ include/linux/keyctl.h | 1 + include/linux/sched.h | 1 + include/linux/security.h | 38 ++++++++++++++++ kernel/cred.c | 43 ++++++++++++++++++ security/capability.c | 19 ++++++++ security/keys/compat.c | 3 ++ security/keys/gc.c | 1 + security/keys/internal.h | 1 + security/keys/keyctl.c | 102 ++++++++++++++++++++++++++++++++++++++++++ security/keys/process_keys.c | 49 ++++++++++++++++++++ security/security.c | 17 +++++++ security/selinux/hooks.c | 28 ++++++++++++ security/smack/smack_lsm.c | 30 +++++++++++++ security/tomoyo/tomoyo.c | 17 +++++++ 34 files changed, 409 insertions(+) (limited to 'Documentation') diff --git a/Documentation/keys.txt b/Documentation/keys.txt index 203487e9b1d..e4dbbdb1bd9 100644 --- a/Documentation/keys.txt +++ b/Documentation/keys.txt @@ -757,6 +757,26 @@ The keyctl syscall functions are: successful. + (*) Install the calling process's session keyring on its parent. + + long keyctl(KEYCTL_SESSION_TO_PARENT); + + This functions attempts to install the calling process's session keyring + on to the calling process's parent, replacing the parent's current session + keyring. + + The calling process must have the same ownership as its parent, the + keyring must have the same ownership as the calling process, the calling + process must have LINK permission on the keyring and the active LSM module + mustn't deny permission, otherwise error EPERM will be returned. + + Error ENOMEM will be returned if there was insufficient memory to complete + the operation, otherwise 0 will be returned to indicate success. + + The keyring will be replaced next time the parent process leaves the + kernel and resumes executing userspace. + + =============== KERNEL SERVICES =============== diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c index 04e17c1f0f1..d91aaa74705 100644 --- a/arch/alpha/kernel/signal.c +++ b/arch/alpha/kernel/signal.c @@ -687,5 +687,7 @@ do_notify_resume(struct pt_regs *regs, struct switch_stack *sw, if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 13dec276927..ea4ad3a43c8 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -711,5 +711,7 @@ do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall) if (thread_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c index 62d242e2d03..de9f7fe2aef 100644 --- a/arch/avr32/kernel/signal.c +++ b/arch/avr32/kernel/signal.c @@ -326,5 +326,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, struct thread_info *ti) if (ti->flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c index 4f06d7fb43d..32e9d5ee895 100644 --- a/arch/cris/kernel/ptrace.c +++ b/arch/cris/kernel/ptrace.c @@ -40,5 +40,7 @@ void do_notify_resume(int canrestart, struct pt_regs *regs, if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c index 4a7a62c6e78..6b0a2b6fed6 100644 --- a/arch/frv/kernel/signal.c +++ b/arch/frv/kernel/signal.c @@ -572,6 +572,8 @@ asmlinkage void do_notify_resume(__u32 thread_info_flags) if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(__frame); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } /* end do_notify_resume() */ diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c index 56b3ab7dbbb..abac3ee8c52 100644 --- a/arch/h8300/kernel/signal.c +++ b/arch/h8300/kernel/signal.c @@ -556,5 +556,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags) if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 5d7c0e5b9e7..89969e95004 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -192,6 +192,8 @@ do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall) if (test_thread_flag(TIF_NOTIFY_RESUME)) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(&scr->pt); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } /* copy user rbs to kernel rbs */ diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index 3220258be18..f80bac17c65 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -411,6 +411,8 @@ void do_notify_resume(struct pt_regs *regs, sigset_t *oldset, if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } clear_thread_flag(TIF_IRET); diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index a3d1015471d..c2acf31874a 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -704,5 +704,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused, if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c index feb2f2e810d..a21f43bc68e 100644 --- a/arch/mn10300/kernel/signal.c +++ b/arch/mn10300/kernel/signal.c @@ -568,5 +568,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags) if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(__frame); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index b3bfc432670..5ca1c02b805 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -649,5 +649,7 @@ void do_notify_resume(struct pt_regs *regs, long in_syscall) if (test_thread_flag(TIF_NOTIFY_RESUME)) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 062bd64e65f..6b4fef877f9 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -536,4 +536,6 @@ void do_notify_resume(struct pt_regs *regs) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index b5afbec1db5..04a21883f32 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -640,5 +640,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0, if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index 0663a0ee602..9e5c9b1d7e9 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -772,5 +772,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c index 181d069a2d4..7ce1a1005b1 100644 --- a/arch/sparc/kernel/signal_32.c +++ b/arch/sparc/kernel/signal_32.c @@ -590,6 +590,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c index ec82d76dc6f..647afbda7ae 100644 --- a/arch/sparc/kernel/signal_64.c +++ b/arch/sparc/kernel/signal_64.c @@ -613,5 +613,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } + diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c index 4c578751e94..81e58238c4c 100644 --- a/arch/x86/kernel/signal.c +++ b/arch/x86/kernel/signal.c @@ -869,6 +869,8 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } #ifdef CONFIG_X86_32 diff --git a/include/linux/cred.h b/include/linux/cred.h index 85439abdbc8..24520a539c6 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -152,6 +152,7 @@ struct cred { extern void __put_cred(struct cred *); extern void exit_creds(struct task_struct *); extern int copy_creds(struct task_struct *, unsigned long); +extern struct cred *cred_alloc_blank(void); extern struct cred *prepare_creds(void); extern struct cred *prepare_exec_creds(void); extern struct cred *prepare_usermodehelper_creds(void); diff --git a/include/linux/key.h b/include/linux/key.h index 33e0165de10..cd50dfa1d4c 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -278,6 +278,8 @@ static inline key_serial_t key_serial(struct key *key) extern ctl_table key_sysctls[]; #endif +extern void key_replace_session_keyring(void); + /* * the userspace interface */ @@ -300,6 +302,7 @@ extern void key_init(void); #define key_fsuid_changed(t) do { } while(0) #define key_fsgid_changed(t) do { } while(0) #define key_init() do { } while(0) +#define key_replace_session_keyring() do { } while(0) #endif /* CONFIG_KEYS */ #endif /* __KERNEL__ */ diff --git a/include/linux/keyctl.h b/include/linux/keyctl.h index c0688eb7209..bd383f1944f 100644 --- a/include/linux/keyctl.h +++ b/include/linux/keyctl.h @@ -52,5 +52,6 @@ #define KEYCTL_SET_TIMEOUT 15 /* set key timeout */ #define KEYCTL_ASSUME_AUTHORITY 16 /* assume request_key() authorisation */ #define KEYCTL_GET_SECURITY 17 /* get key security label */ +#define KEYCTL_SESSION_TO_PARENT 18 /* apply session keyring to parent process */ #endif /* _LINUX_KEYCTL_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 5c7ce13c169..9304027673b 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1292,6 +1292,7 @@ struct task_struct { struct mutex cred_guard_mutex; /* guard against foreign influences on * credential calculations * (notably. ptrace) */ + struct cred *replacement_session_keyring; /* for KEYCTL_SESSION_TO_PARENT */ char comm[TASK_COMM_LEN]; /* executable name excluding path - access with [gs]et_task_comm (which lock diff --git a/include/linux/security.h b/include/linux/security.h index 40ba39ea68c..97de3fe3dd0 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -653,6 +653,11 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * manual page for definitions of the @clone_flags. * @clone_flags contains the flags indicating what should be shared. * Return 0 if permission is granted. + * @cred_alloc_blank: + * @cred points to the credentials. + * @gfp indicates the atomicity of any memory allocations. + * Only allocate sufficient memory and attach to @cred such that + * cred_transfer() will not get ENOMEM. * @cred_free: * @cred points to the credentials. * Deallocate and clear the cred->security field in a set of credentials. @@ -665,6 +670,10 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * @new points to the new credentials. * @old points to the original credentials. * Install a new set of credentials. + * @cred_transfer: + * @new points to the new credentials. + * @old points to the original credentials. + * Transfer data from original creds to new creds * @kernel_act_as: * Set the credentials for a kernel service to act as (subjective context). * @new points to the credentials to be modified. @@ -1103,6 +1112,13 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * Return the length of the string (including terminating NUL) or -ve if * an error. * May also return 0 (and a NULL buffer pointer) if there is no label. + * @key_session_to_parent: + * Forcibly assign the session keyring from a process to its parent + * process. + * @cred: Pointer to process's credentials + * @parent_cred: Pointer to parent process's credentials + * @keyring: Proposed new session keyring + * Return 0 if permission is granted, -ve error otherwise. * * Security hooks affecting all System V IPC operations. * @@ -1498,10 +1514,12 @@ struct security_operations { int (*dentry_open) (struct file *file, const struct cred *cred); int (*task_create) (unsigned long clone_flags); + int (*cred_alloc_blank) (struct cred *cred, gfp_t gfp); void (*cred_free) (struct cred *cred); int (*cred_prepare)(struct cred *new, const struct cred *old, gfp_t gfp); void (*cred_commit)(struct cred *new, const struct cred *old); + void (*cred_transfer)(struct cred *new, const struct cred *old); int (*kernel_act_as)(struct cred *new, u32 secid); int (*kernel_create_files_as)(struct cred *new, struct inode *inode); int (*kernel_module_request)(void); @@ -1639,6 +1657,9 @@ struct security_operations { const struct cred *cred, key_perm_t perm); int (*key_getsecurity)(struct key *key, char **_buffer); + int (*key_session_to_parent)(const struct cred *cred, + const struct cred *parent_cred, + struct key *key); #endif /* CONFIG_KEYS */ #ifdef CONFIG_AUDIT @@ -1755,9 +1776,11 @@ int security_file_send_sigiotask(struct task_struct *tsk, int security_file_receive(struct file *file); int security_dentry_open(struct file *file, const struct cred *cred); int security_task_create(unsigned long clone_flags); +int security_cred_alloc_blank(struct cred *cred, gfp_t gfp); void security_cred_free(struct cred *cred); int security_prepare_creds(struct cred *new, const struct cred *old, gfp_t gfp); void security_commit_creds(struct cred *new, const struct cred *old); +void security_transfer_creds(struct cred *new, const struct cred *old); int security_kernel_act_as(struct cred *new, u32 secid); int security_kernel_create_files_as(struct cred *new, struct inode *inode); int security_kernel_module_request(void); @@ -2286,6 +2309,9 @@ static inline int security_task_create(unsigned long clone_flags) return 0; } +static inline void security_cred_alloc_blank(struct cred *cred, gfp_t gfp) +{ } + static inline void security_cred_free(struct cred *cred) { } @@ -2301,6 +2327,11 @@ static inline void security_commit_creds(struct cred *new, { } +static inline void security_transfer_creds(struct cred *new, + const struct cred *old) +{ +} + static inline int security_kernel_act_as(struct cred *cred, u32 secid) { return 0; @@ -2923,6 +2954,9 @@ void security_key_free(struct key *key); int security_key_permission(key_ref_t key_ref, const struct cred *cred, key_perm_t perm); int security_key_getsecurity(struct key *key, char **_buffer); +int security_key_session_to_parent(const struct cred *cred, + const struct cred *parent_cred, + struct key *key); #else @@ -2950,6 +2984,10 @@ static inline int security_key_getsecurity(struct key *key, char **_buffer) return 0; } +static inline int security_key_session_to_parent(const struct cred *cred, + const struct cred *parent_cred, + struct key *key); + #endif #endif /* CONFIG_KEYS */ diff --git a/kernel/cred.c b/kernel/cred.c index 24dd2f5104b..006fcab009d 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -199,6 +199,49 @@ void exit_creds(struct task_struct *tsk) validate_creds(cred); alter_cred_subscribers(cred, -1); put_cred(cred); + + cred = (struct cred *) tsk->replacement_session_keyring; + if (cred) { + tsk->replacement_session_keyring = NULL; + validate_creds(cred); + put_cred(cred); + } +} + +/* + * Allocate blank credentials, such that the credentials can be filled in at a + * later date without risk of ENOMEM. + */ +struct cred *cred_alloc_blank(void) +{ + struct cred *new; + + new = kmem_cache_zalloc(cred_jar, GFP_KERNEL); + if (!new) + return NULL; + +#ifdef CONFIG_KEYS + new->tgcred = kzalloc(sizeof(*new->tgcred), GFP_KERNEL); + if (!new->tgcred) { + kfree(new); + return NULL; + } + atomic_set(&new->tgcred->usage, 1); +#endif + + atomic_set(&new->usage, 1); + + if (security_cred_alloc_blank(new, GFP_KERNEL) < 0) + goto error; + +#ifdef CONFIG_DEBUG_CREDENTIALS + new->magic = CRED_MAGIC; +#endif + return new; + +error: + abort_creds(new); + return NULL; } /** diff --git a/security/capability.c b/security/capability.c index 06400cf0775..93a2ffe6590 100644 --- a/security/capability.c +++ b/security/capability.c @@ -373,6 +373,11 @@ static int cap_task_create(unsigned long clone_flags) return 0; } +static int cap_cred_alloc_blank(struct cred *cred, gfp_t gfp) +{ + return 0; +} + static void cap_cred_free(struct cred *cred) { } @@ -386,6 +391,10 @@ static void cap_cred_commit(struct cred *new, const struct cred *old) { } +static void cap_cred_transfer(struct cred *new, const struct cred *old) +{ +} + static int cap_kernel_act_as(struct cred *new, u32 secid) { return 0; @@ -836,6 +845,13 @@ static int cap_key_getsecurity(struct key *key, char **_buffer) return 0; } +static int cap_key_session_to_parent(const struct cred *cred, + const struct cred *parent_cred, + struct key *key) +{ + return 0; +} + #endif /* CONFIG_KEYS */ #ifdef CONFIG_AUDIT @@ -961,9 +977,11 @@ void security_fixup_ops(struct security_operations *ops) set_to_cap_if_null(ops, file_receive); set_to_cap_if_null(ops, dentry_open); set_to_cap_if_null(ops, task_create); + set_to_cap_if_null(ops, cred_alloc_blank); set_to_cap_if_null(ops, cred_free); set_to_cap_if_null(ops, cred_prepare); set_to_cap_if_null(ops, cred_commit); + set_to_cap_if_null(ops, cred_transfer); set_to_cap_if_null(ops, kernel_act_as); set_to_cap_if_null(ops, kernel_create_files_as); set_to_cap_if_null(ops, kernel_module_request); @@ -1063,6 +1081,7 @@ void security_fixup_ops(struct security_operations *ops) set_to_cap_if_null(ops, key_free); set_to_cap_if_null(ops, key_permission); set_to_cap_if_null(ops, key_getsecurity); + set_to_cap_if_null(ops, key_session_to_parent); #endif /* CONFIG_KEYS */ #ifdef CONFIG_AUDIT set_to_cap_if_null(ops, audit_rule_init); diff --git a/security/keys/compat.c b/security/keys/compat.c index c766c68a63b..792c0a611a6 100644 --- a/security/keys/compat.c +++ b/security/keys/compat.c @@ -82,6 +82,9 @@ asmlinkage long compat_sys_keyctl(u32 option, case KEYCTL_GET_SECURITY: return keyctl_get_security(arg2, compat_ptr(arg3), arg4); + case KEYCTL_SESSION_TO_PARENT: + return keyctl_session_to_parent(); + default: return -EOPNOTSUPP; } diff --git a/security/keys/gc.c b/security/keys/gc.c index 44adc325e15..1e616aef55f 100644 --- a/security/keys/gc.c +++ b/security/keys/gc.c @@ -65,6 +65,7 @@ static void key_gc_timer_func(unsigned long data) * - return true if we altered the keyring */ static bool key_gc_keyring(struct key *keyring, time_t limit) + __releases(key_serial_lock) { struct keyring_list *klist; struct key *key; diff --git a/security/keys/internal.h b/security/keys/internal.h index fb830514c33..24ba0307b7a 100644 --- a/security/keys/internal.h +++ b/security/keys/internal.h @@ -201,6 +201,7 @@ extern long keyctl_set_timeout(key_serial_t, unsigned); extern long keyctl_assume_authority(key_serial_t); extern long keyctl_get_security(key_serial_t keyid, char __user *buffer, size_t buflen); +extern long keyctl_session_to_parent(void); /* * debugging key validation diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index 736d7800f97..74c96852459 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -1228,6 +1228,105 @@ long keyctl_get_security(key_serial_t keyid, return ret; } +/* + * attempt to install the calling process's session keyring on the process's + * parent process + * - the keyring must exist and must grant us LINK permission + * - implements keyctl(KEYCTL_SESSION_TO_PARENT) + */ +long keyctl_session_to_parent(void) +{ + struct task_struct *me, *parent; + const struct cred *mycred, *pcred; + struct cred *cred, *oldcred; + key_ref_t keyring_r; + int ret; + + keyring_r = lookup_user_key(KEY_SPEC_SESSION_KEYRING, 0, KEY_LINK); + if (IS_ERR(keyring_r)) + return PTR_ERR(keyring_r); + + /* our parent is going to need a new cred struct, a new tgcred struct + * and new security data, so we allocate them here to prevent ENOMEM in + * our parent */ + ret = -ENOMEM; + cred = cred_alloc_blank(); + if (!cred) + goto error_keyring; + + cred->tgcred->session_keyring = key_ref_to_ptr(keyring_r); + keyring_r = NULL; + + me = current; + write_lock_irq(&tasklist_lock); + + parent = me->real_parent; + ret = -EPERM; + + /* the parent mustn't be init and mustn't be a kernel thread */ + if (parent->pid <= 1 || !parent->mm) + goto not_permitted; + + /* the parent must be single threaded */ + if (atomic_read(&parent->signal->count) != 1) + goto not_permitted; + + /* the parent and the child must have different session keyrings or + * there's no point */ + mycred = current_cred(); + pcred = __task_cred(parent); + if (mycred == pcred || + mycred->tgcred->session_keyring == pcred->tgcred->session_keyring) + goto already_same; + + /* the parent must have the same effective ownership and mustn't be + * SUID/SGID */ + if (pcred-> uid != mycred->euid || + pcred->euid != mycred->euid || + pcred->suid != mycred->euid || + pcred-> gid != mycred->egid || + pcred->egid != mycred->egid || + pcred->sgid != mycred->egid) + goto not_permitted; + + /* the keyrings must have the same UID */ + if (pcred ->tgcred->session_keyring->uid != mycred->euid || + mycred->tgcred->session_keyring->uid != mycred->euid) + goto not_permitted; + + /* the LSM must permit the replacement of the parent's keyring with the + * keyring from this process */ + ret = security_key_session_to_parent(mycred, pcred, + key_ref_to_ptr(keyring_r)); + if (ret < 0) + goto not_permitted; + + /* if there's an already pending keyring replacement, then we replace + * that */ + oldcred = parent->replacement_session_keyring; + + /* the replacement session keyring is applied just prior to userspace + * restarting */ + parent->replacement_session_keyring = cred; + cred = NULL; + set_ti_thread_flag(task_thread_info(parent), TIF_NOTIFY_RESUME); + + write_unlock_irq(&tasklist_lock); + if (oldcred) + put_cred(oldcred); + return 0; + +already_same: + ret = 0; +not_permitted: + put_cred(cred); + return ret; + +error_keyring: + key_ref_put(keyring_r); + return ret; +} + /*****************************************************************************/ /* * the key control system call @@ -1313,6 +1412,9 @@ SYSCALL_DEFINE5(keyctl, int, option, unsigned long, arg2, unsigned long, arg3, (char __user *) arg3, (size_t) arg4); + case KEYCTL_SESSION_TO_PARENT: + return keyctl_session_to_parent(); + default: return -EOPNOTSUPP; } diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c index 4739cfbb41b..5c23afb31ec 100644 --- a/security/keys/process_keys.c +++ b/security/keys/process_keys.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include "internal.h" @@ -768,3 +769,51 @@ error: abort_creds(new); return ret; } + +/* + * Replace a process's session keyring when that process resumes userspace on + * behalf of one of its children + */ +void key_replace_session_keyring(void) +{ + const struct cred *old; + struct cred *new; + + if (!current->replacement_session_keyring) + return; + + write_lock_irq(&tasklist_lock); + new = current->replacement_session_keyring; + current->replacement_session_keyring = NULL; + write_unlock_irq(&tasklist_lock); + + if (!new) + return; + + old = current_cred(); + new-> uid = old-> uid; + new-> euid = old-> euid; + new-> suid = old-> suid; + new->fsuid = old->fsuid; + new-> gid = old-> gid; + new-> egid = old-> egid; + new-> sgid = old-> sgid; + new->fsgid = old->fsgid; + new->user = get_uid(old->user); + new->group_info = get_group_info(old->group_info); + + new->securebits = old->securebits; + new->cap_inheritable = old->cap_inheritable; + new->cap_permitted = old->cap_permitted; + new->cap_effective = old->cap_effective; + new->cap_bset = old->cap_bset; + + new->jit_keyring = old->jit_keyring; + new->thread_keyring = key_get(old->thread_keyring); + new->tgcred->tgid = old->tgcred->tgid; + new->tgcred->process_keyring = key_get(old->tgcred->process_keyring); + + security_transfer_creds(new, old); + + commit_creds(new); +} diff --git a/security/security.c b/security/security.c index f88eaf6b14c..d8b727637f0 100644 --- a/security/security.c +++ b/security/security.c @@ -684,6 +684,11 @@ int security_task_create(unsigned long clone_flags) return security_ops->task_create(clone_flags); } +int security_cred_alloc_blank(struct cred *cred, gfp_t gfp) +{ + return security_ops->cred_alloc_blank(cred, gfp); +} + void security_cred_free(struct cred *cred) { security_ops->cred_free(cred); @@ -699,6 +704,11 @@ void security_commit_creds(struct cred *new, const struct cred *old) security_ops->cred_commit(new, old); } +void security_transfer_creds(struct cred *new, const struct cred *old) +{ + security_ops->cred_transfer(new, old); +} + int security_kernel_act_as(struct cred *new, u32 secid) { return security_ops->kernel_act_as(new, secid); @@ -1241,6 +1251,13 @@ int security_key_getsecurity(struct key *key, char **_buffer) return security_ops->key_getsecurity(key, _buffer); } +int security_key_session_to_parent(const struct cred *cred, + const struct cred *parent_cred, + struct key *key) +{ + return security_ops->key_session_to_parent(cred, parent_cred, key); +} + #endif /* CONFIG_KEYS */ #ifdef CONFIG_AUDIT diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index c3bb31ecc5a..134a9c0d200 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3232,6 +3232,21 @@ static int selinux_task_create(unsigned long clone_flags) return current_has_perm(current, PROCESS__FORK); } +/* + * allocate the SELinux part of blank credentials + */ +static int selinux_cred_alloc_blank(struct cred *cred, gfp_t gfp) +{ + struct task_security_struct *tsec; + + tsec = kzalloc(sizeof(struct task_security_struct), gfp); + if (!tsec) + return -ENOMEM; + + cred->security = tsec; + return 0; +} + /* * detach and free the LSM part of a set of credentials */ @@ -3263,6 +3278,17 @@ static int selinux_cred_prepare(struct cred *new, const struct cred *old, return 0; } +/* + * transfer the SELinux data to a blank set of creds + */ +static void selinux_cred_transfer(struct cred *new, const struct cred *old) +{ + const struct task_security_struct *old_tsec = old->security; + struct task_security_struct *tsec = new->security; + + *tsec = *old_tsec; +} + /* * set the security data for a kernel service * - all the creation contexts are set to unlabelled @@ -5469,8 +5495,10 @@ static struct security_operations selinux_ops = { .dentry_open = selinux_dentry_open, .task_create = selinux_task_create, + .cred_alloc_blank = selinux_cred_alloc_blank, .cred_free = selinux_cred_free, .cred_prepare = selinux_cred_prepare, + .cred_transfer = selinux_cred_transfer, .kernel_act_as = selinux_kernel_act_as, .kernel_create_files_as = selinux_kernel_create_files_as, .kernel_module_request = selinux_kernel_module_request, diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index c243a2b2583..969f5fee190 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -1079,6 +1079,22 @@ static int smack_file_receive(struct file *file) * Task hooks */ +/** + * smack_cred_alloc_blank - "allocate" blank task-level security credentials + * @new: the new credentials + * @gfp: the atomicity of any memory allocations + * + * Prepare a blank set of credentials for modification. This must allocate all + * the memory the LSM module might require such that cred_transfer() can + * complete without error. + */ +static int smack_cred_alloc_blank(struct cred *cred, gfp_t gfp) +{ + cred->security = NULL; + return 0; +} + + /** * smack_cred_free - "free" task-level security credentials * @cred: the credentials in question @@ -1116,6 +1132,18 @@ static void smack_cred_commit(struct cred *new, const struct cred *old) { } +/** + * smack_cred_transfer - Transfer the old credentials to the new credentials + * @new: the new credentials + * @old: the original credentials + * + * Fill in a set of blank credentials from another set of credentials. + */ +static void smack_cred_transfer(struct cred *new, const struct cred *old) +{ + new->security = old->security; +} + /** * smack_kernel_act_as - Set the subjective context in a set of credentials * @new: points to the set of credentials to be modified. @@ -3073,9 +3101,11 @@ struct security_operations smack_ops = { .file_send_sigiotask = smack_file_send_sigiotask, .file_receive = smack_file_receive, + .cred_alloc_blank = smack_cred_alloc_blank, .cred_free = smack_cred_free, .cred_prepare = smack_cred_prepare, .cred_commit = smack_cred_commit, + .cred_transfer = smack_cred_transfer, .kernel_act_as = smack_kernel_act_as, .kernel_create_files_as = smack_kernel_create_files_as, .task_setpgid = smack_task_setpgid, diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c index 35a13e7915e..9548a0984cc 100644 --- a/security/tomoyo/tomoyo.c +++ b/security/tomoyo/tomoyo.c @@ -14,6 +14,12 @@ #include "tomoyo.h" #include "realpath.h" +static int tomoyo_cred_alloc_blank(struct cred *new, gfp_t gfp) +{ + new->security = NULL; + return 0; +} + static int tomoyo_cred_prepare(struct cred *new, const struct cred *old, gfp_t gfp) { @@ -25,6 +31,15 @@ static int tomoyo_cred_prepare(struct cred *new, const struct cred *old, return 0; } +static void tomoyo_cred_transfer(struct cred *new, const struct cred *old) +{ + /* + * Since "struct tomoyo_domain_info *" is a sharable pointer, + * we don't need to duplicate. + */ + new->security = old->security; +} + static int tomoyo_bprm_set_creds(struct linux_binprm *bprm) { int rc; @@ -262,7 +277,9 @@ static int tomoyo_dentry_open(struct file *f, const struct cred *cred) */ static struct security_operations tomoyo_security_ops = { .name = "tomoyo", + .cred_alloc_blank = tomoyo_cred_alloc_blank, .cred_prepare = tomoyo_cred_prepare, + .cred_transfer = tomoyo_cred_transfer, .bprm_set_creds = tomoyo_bprm_set_creds, .bprm_check_security = tomoyo_bprm_check_security, #ifdef CONFIG_SYSCTL -- cgit v1.2.3-70-g09d2 From 30681bcf2b15a601b9460e6ddab22077998b8d4c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 3 Sep 2009 16:08:08 +0200 Subject: ALSA: dummy - Add more description Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 4252697a95d..bb488b575de 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -513,6 +513,19 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. or input, but you may use this module for any application which requires a sound card (like RealPlayer). + pcm_devs - Number of PCM devices assigned to each card + (default = 1, up to 4) + pcm_substreams - Number of PCM substreams assigned to each PCM + (default = 8, up to 16) + hrtimer - Use hrtimer (=1, default) or system timer (=0) + + When multiple PCM devices are created, snd-dummy gives different + behavior to each PCM device: + 0 = interleaved with mmap support + 1 = non-interleaved with mmap support + 2 = interleaved without mmap + 3 = non-interleaved without mmap + The power-management is supported. Module snd-echo3g -- cgit v1.2.3-70-g09d2 From c0407a96d04794be586eab4a412320079446cf93 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 3 Sep 2009 20:14:01 +0300 Subject: OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The interface provides device drivers, CPUFreq, and DSPBridge with a means of controlling OMAP power management parameters that are not yet supported by the Linux PM PMQoS interface. Copious documentation is in the patch in Documentation/arm/OMAP/omap_pm and the interface header file, arch/arm/plat-omap/include/mach/omap-pm.h. Thanks to Rajendra Nayak for adding CORE (VDD2) OPP support and moving the OPP table initialization earlier in the event that the clock code needs them. Thanks to Tero Kristo for fixing the parameter check in omap_pm_set_min_bus_tput(). Jouni signed off on Tero's patch. Signed-off-by: Paul Walmsley Signed-off-by: Kevin Hilman Signed-off-by: Rajendra Nayak Signed-off-by: Tero Kristo Signed-off-by: Jouni Högander Cc: Tony Lindgren Cc: Igor Stoppa Cc: Richard Woodruff Cc: Anand Sawant Cc: Sakari Poussa Cc: Veeramanikandan Raju Cc: Karthik Dasu --- Documentation/arm/OMAP/omap_pm | 129 +++++++++++++ arch/arm/mach-omap2/io.c | 4 + arch/arm/plat-omap/Kconfig | 13 ++ arch/arm/plat-omap/Makefile | 1 + arch/arm/plat-omap/include/mach/omap-pm.h | 301 ++++++++++++++++++++++++++++++ arch/arm/plat-omap/omap-pm-noop.c | 296 +++++++++++++++++++++++++++++ 6 files changed, 744 insertions(+) create mode 100644 Documentation/arm/OMAP/omap_pm create mode 100644 arch/arm/plat-omap/include/mach/omap-pm.h create mode 100644 arch/arm/plat-omap/omap-pm-noop.c (limited to 'Documentation') diff --git a/Documentation/arm/OMAP/omap_pm b/Documentation/arm/OMAP/omap_pm new file mode 100644 index 00000000000..5389440aade --- /dev/null +++ b/Documentation/arm/OMAP/omap_pm @@ -0,0 +1,129 @@ + +The OMAP PM interface +===================== + +This document describes the temporary OMAP PM interface. Driver +authors use these functions to communicate minimum latency or +throughput constraints to the kernel power management code. +Over time, the intention is to merge features from the OMAP PM +interface into the Linux PM QoS code. + +Drivers need to express PM parameters which: + +- support the range of power management parameters present in the TI SRF; + +- separate the drivers from the underlying PM parameter + implementation, whether it is the TI SRF or Linux PM QoS or Linux + latency framework or something else; + +- specify PM parameters in terms of fundamental units, such as + latency and throughput, rather than units which are specific to OMAP + or to particular OMAP variants; + +- allow drivers which are shared with other architectures (e.g., + DaVinci) to add these constraints in a way which won't affect non-OMAP + systems, + +- can be implemented immediately with minimal disruption of other + architectures. + + +This document proposes the OMAP PM interface, including the following +five power management functions for driver code: + +1. Set the maximum MPU wakeup latency: + (*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t) + +2. Set the maximum device wakeup latency: + (*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t) + +3. Set the maximum system DMA transfer start latency (CORE pwrdm): + (*pdata->set_max_sdma_lat)(struct device *dev, long t) + +4. Set the minimum bus throughput needed by a device: + (*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r) + +5. Return the number of times the device has lost context + (*pdata->get_dev_context_loss_count)(struct device *dev) + + +Further documentation for all OMAP PM interface functions can be +found in arch/arm/plat-omap/include/mach/omap-pm.h. + + +The OMAP PM layer is intended to be temporary +--------------------------------------------- + +The intention is that eventually the Linux PM QoS layer should support +the range of power management features present in OMAP3. As this +happens, existing drivers using the OMAP PM interface can be modified +to use the Linux PM QoS code; and the OMAP PM interface can disappear. + + +Driver usage of the OMAP PM functions +------------------------------------- + +As the 'pdata' in the above examples indicates, these functions are +exposed to drivers through function pointers in driver .platform_data +structures. The function pointers are initialized by the board-*.c +files to point to the corresponding OMAP PM functions: +.set_max_dev_wakeup_lat will point to +omap_pm_set_max_dev_wakeup_lat(), etc. Other architectures which do +not support these functions should leave these function pointers set +to NULL. Drivers should use the following idiom: + + if (pdata->set_max_dev_wakeup_lat) + (*pdata->set_max_dev_wakeup_lat)(dev, t); + +The most common usage of these functions will probably be to specify +the maximum time from when an interrupt occurs, to when the device +becomes accessible. To accomplish this, driver writers should use the +set_max_mpu_wakeup_lat() function to to constrain the MPU wakeup +latency, and the set_max_dev_wakeup_lat() function to constrain the +device wakeup latency (from clk_enable() to accessibility). For +example, + + /* Limit MPU wakeup latency */ + if (pdata->set_max_mpu_wakeup_lat) + (*pdata->set_max_mpu_wakeup_lat)(dev, tc); + + /* Limit device powerdomain wakeup latency */ + if (pdata->set_max_dev_wakeup_lat) + (*pdata->set_max_dev_wakeup_lat)(dev, td); + + /* total wakeup latency in this example: (tc + td) */ + +The PM parameters can be overwritten by calling the function again +with the new value. The settings can be removed by calling the +function with a t argument of -1 (except in the case of +set_max_bus_tput(), which should be called with an r argument of 0). + +The fifth function above, omap_pm_get_dev_context_loss_count(), +is intended as an optimization to allow drivers to determine whether the +device has lost its internal context. If context has been lost, the +driver must restore its internal context before proceeding. + + +Other specialized interface functions +------------------------------------- + +The five functions listed above are intended to be usable by any +device driver. DSPBridge and CPUFreq have a few special requirements. +DSPBridge expresses target DSP performance levels in terms of OPP IDs. +CPUFreq expresses target MPU performance levels in terms of MPU +frequency. The OMAP PM interface contains functions for these +specialized cases to convert that input information (OPPs/MPU +frequency) into the form that the underlying power management +implementation needs: + +6. (*pdata->dsp_get_opp_table)(void) + +7. (*pdata->dsp_set_min_opp)(u8 opp_id) + +8. (*pdata->dsp_get_opp)(void) + +9. (*pdata->cpu_get_freq_table)(void) + +10. (*pdata->cpu_set_freq)(unsigned long f) + +11. (*pdata->cpu_get_freq)(void) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e9b9bcb19b4..4bfe873e1b8 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -36,6 +36,7 @@ #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" +#include #include #include "powerdomains.h" @@ -281,9 +282,12 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, { omap2_mux_init(); #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */ + /* The OPP tables have to be registered before a clk init */ + omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps); pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); + omap_pm_if_init(); omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); #endif diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ab9f9efc9b6..64b3f52bd9b 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -187,6 +187,19 @@ config OMAP_SERIAL_WAKE to data on the serial RX line. This allows you to wake the system from serial console. +choice + prompt "OMAP PM layer selection" + depends on ARCH_OMAP + default OMAP_PM_NOOP + +config OMAP_PM_NONE + bool "No PM layer" + +config OMAP_PM_NOOP + bool "No-op/debug PM layer" + +endchoice + endmenu endif diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 769a4c20036..5e10d0a2eb8 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -26,3 +26,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o +obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o \ No newline at end of file diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/mach/omap-pm.h new file mode 100644 index 00000000000..3ee41d71149 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap-pm.h @@ -0,0 +1,301 @@ +/* + * omap-pm.h - OMAP power management interface + * + * Copyright (C) 2008-2009 Texas Instruments, Inc. + * Copyright (C) 2008-2009 Nokia Corporation + * Paul Walmsley + * + * Interface developed by (in alphabetical order): Karthik Dasu, Jouni + * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa, + * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, + * Richard Woodruff + */ + +#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H +#define ASM_ARM_ARCH_OMAP_OMAP_PM_H + +#include +#include + +#include "powerdomain.h" + +/** + * struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU + * @rate: target clock rate + * @opp_id: OPP ID + * @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP + * + * Operating performance point data. Can vary by OMAP chip and board. + */ +struct omap_opp { + unsigned long rate; + u8 opp_id; + u16 min_vdd; +}; + +extern struct omap_opp *mpu_opps; +extern struct omap_opp *dsp_opps; +extern struct omap_opp *l3_opps; + +/* + * agent_id values for use with omap_pm_set_min_bus_tput(): + * + * OCP_INITIATOR_AGENT is only valid for devices that can act as + * initiators -- it represents the device's L3 interconnect + * connection. OCP_TARGET_AGENT represents the device's L4 + * interconnect connection. + */ +#define OCP_TARGET_AGENT 1 +#define OCP_INITIATOR_AGENT 2 + +/** + * omap_pm_if_early_init - OMAP PM init code called before clock fw init + * @mpu_opp_table: array ptr to struct omap_opp for MPU + * @dsp_opp_table: array ptr to struct omap_opp for DSP + * @l3_opp_table : array ptr to struct omap_opp for CORE + * + * Initialize anything that must be configured before the clock + * framework starts. The "_if_" is to avoid name collisions with the + * PM idle-loop code. + */ +int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table, + struct omap_opp *dsp_opp_table, + struct omap_opp *l3_opp_table); + +/** + * omap_pm_if_init - OMAP PM init code called after clock fw init + * + * The main initialization code. OPP tables are passed in here. The + * "_if_" is to avoid name collisions with the PM idle-loop code. + */ +int __init omap_pm_if_init(void); + +/** + * omap_pm_if_exit - OMAP PM exit code + * + * Exit code; currently unused. The "_if_" is to avoid name + * collisions with the PM idle-loop code. + */ +void omap_pm_if_exit(void); + +/* + * Device-driver-originated constraints (via board-*.c files, platform_data) + */ + + +/** + * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency + * @dev: struct device * requesting the constraint + * @t: maximum MPU wakeup latency in microseconds + * + * Request that the maximum interrupt latency for the MPU to be no + * greater than 't' microseconds. "Interrupt latency" in this case is + * defined as the elapsed time from the occurrence of a hardware or + * timer interrupt to the time when the device driver's interrupt + * service routine has been entered by the MPU. + * + * It is intended that underlying PM code will use this information to + * determine what power state to put the MPU powerdomain into, and + * possibly the CORE powerdomain as well, since interrupt handling + * code currently runs from SDRAM. Advanced PM or board*.c code may + * also configure interrupt controller priorities, OCP bus priorities, + * CPU speed(s), etc. + * + * This function will not affect device wakeup latency, e.g., time + * elapsed from when a device driver enables a hardware device with + * clk_enable(), to when the device is ready for register access or + * other use. To control this device wakeup latency, use + * set_max_dev_wakeup_lat() + * + * Multiple calls to set_max_mpu_wakeup_lat() will replace the + * previous t value. To remove the latency target for the MPU, call + * with t = -1. + * + * No return value. + */ +void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); + + +/** + * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device + * @dev: struct device * requesting the constraint + * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT) + * @r: minimum throughput (in KiB/s) + * + * Request that the minimum data throughput on the OCP interconnect + * attached to device 'dev' interconnect agent 'tbus_id' be no less + * than 'r' KiB/s. + * + * It is expected that the OMAP PM or bus code will use this + * information to set the interconnect clock to run at the lowest + * possible speed that satisfies all current system users. The PM or + * bus code will adjust the estimate based on its model of the bus, so + * device driver authors should attempt to specify an accurate + * quantity for their device use case, and let the PM or bus code + * overestimate the numbers as necessary to handle request/response + * latency, other competing users on the system, etc. On OMAP2/3, if + * a driver requests a minimum L4 interconnect speed constraint, the + * code will also need to add an minimum L3 interconnect speed + * constraint, + * + * Multiple calls to set_min_bus_tput() will replace the previous rate + * value for this device. To remove the interconnect throughput + * restriction for this device, call with r = 0. + * + * No return value. + */ +void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); + + +/** + * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency + * @dev: struct device * + * @t: maximum device wakeup latency in microseconds + * + * Request that the maximum amount of time necessary for a device to + * become accessible after its clocks are enabled should be no greater + * than 't' microseconds. Specifically, this represents the time from + * when a device driver enables device clocks with clk_enable(), to + * when the register reads and writes on the device will succeed. + * This function should be called before clk_disable() is called, + * since the power state transition decision may be made during + * clk_disable(). + * + * It is intended that underlying PM code will use this information to + * determine what power state to put the powerdomain enclosing this + * device into. + * + * Multiple calls to set_max_dev_wakeup_lat() will replace the + * previous wakeup latency values for this device. To remove the wakeup + * latency restriction for this device, call with t = -1. + * + * No return value. + */ +void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t); + + +/** + * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency + * @dev: struct device * + * @t: maximum DMA transfer start latency in microseconds + * + * Request that the maximum system DMA transfer start latency for this + * device 'dev' should be no greater than 't' microseconds. "DMA + * transfer start latency" here is defined as the elapsed time from + * when a device (e.g., McBSP) requests that a system DMA transfer + * start or continue, to the time at which data starts to flow into + * that device from the system DMA controller. + * + * It is intended that underlying PM code will use this information to + * determine what power state to put the CORE powerdomain into. + * + * Since system DMA transfers may not involve the MPU, this function + * will not affect MPU wakeup latency. Use set_max_cpu_lat() to do + * so. Similarly, this function will not affect device wakeup latency + * -- use set_max_dev_wakeup_lat() to affect that. + * + * Multiple calls to set_max_sdma_lat() will replace the previous t + * value for this device. To remove the maximum DMA latency for this + * device, call with t = -1. + * + * No return value. + */ +void omap_pm_set_max_sdma_lat(struct device *dev, long t); + + +/* + * DSP Bridge-specific constraints + */ + +/** + * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table + * + * Intended for use by DSPBridge. Returns an array of OPP->DSP clock + * frequency entries. The final item in the array should have .rate = + * .opp_id = 0. + */ +const struct omap_opp *omap_pm_dsp_get_opp_table(void); + +/** + * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge + * @opp_id: target DSP OPP ID + * + * Set a minimum OPP ID for the DSP. This is intended to be called + * only from the DSP Bridge MPU-side driver. Unfortunately, the only + * information that code receives from the DSP/BIOS load estimator is the + * target OPP ID; hence, this interface. No return value. + */ +void omap_pm_dsp_set_min_opp(u8 opp_id); + +/** + * omap_pm_dsp_get_opp - report the current DSP OPP ID + * + * Report the current OPP for the DSP. Since on OMAP3, the DSP and + * MPU share a single voltage domain, the OPP ID returned back may + * represent a higher DSP speed than the OPP requested via + * omap_pm_dsp_set_min_opp(). + * + * Returns the current VDD1 OPP ID, or 0 upon error. + */ +u8 omap_pm_dsp_get_opp(void); + + +/* + * CPUFreq-originated constraint + * + * In the future, this should be handled by custom OPP clocktype + * functions. + */ + +/** + * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr + * + * Provide a frequency table usable by CPUFreq for the current chip/board. + * Returns a pointer to a struct cpufreq_frequency_table array or NULL + * upon error. + */ +struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void); + +/** + * omap_pm_cpu_set_freq - set the current minimum MPU frequency + * @f: MPU frequency in Hz + * + * Set the current minimum CPU frequency. The actual CPU frequency + * used could end up higher if the DSP requested a higher OPP. + * Intended to be called by plat-omap/cpu_omap.c:omap_target(). No + * return value. + */ +void omap_pm_cpu_set_freq(unsigned long f); + +/** + * omap_pm_cpu_get_freq - report the current CPU frequency + * + * Returns the current MPU frequency, or 0 upon error. + */ +unsigned long omap_pm_cpu_get_freq(void); + + +/* + * Device context loss tracking + */ + +/** + * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx + * @dev: struct device * + * + * This function returns the number of times that the device @dev has + * lost its internal context. This generally occurs on a powerdomain + * transition to OFF. Drivers use this as an optimization to avoid restoring + * context if the device hasn't lost it. To use, drivers should initially + * call this in their context save functions and store the result. Early in + * the driver's context restore function, the driver should call this function + * again, and compare the result to the stored counter. If they differ, the + * driver must restore device context. If the number of context losses + * exceeds the maximum positive integer, the function will wrap to 0 and + * continue counting. Returns the number of context losses for this device, + * or -EINVAL upon error. + */ +int omap_pm_get_dev_context_loss_count(struct device *dev); + + +#endif diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c new file mode 100644 index 00000000000..e98f0a2a6c2 --- /dev/null +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -0,0 +1,296 @@ +/* + * omap-pm-noop.c - OMAP power management interface - dummy version + * + * This code implements the OMAP power management interface to + * drivers, CPUIdle, CPUFreq, and DSP Bridge. It is strictly for + * debug/demonstration use, as it does nothing but printk() whenever a + * function is called (when DEBUG is defined, below) + * + * Copyright (C) 2008-2009 Texas Instruments, Inc. + * Copyright (C) 2008-2009 Nokia Corporation + * Paul Walmsley + * + * Interface developed by (in alphabetical order): + * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan + * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff + */ + +#undef DEBUG + +#include +#include +#include + +/* Interface documentation is in mach/omap-pm.h */ +#include + +#include + +struct omap_opp *dsp_opps; +struct omap_opp *mpu_opps; +struct omap_opp *l3_opps; + +/* + * Device-driver-originated constraints (via board-*.c files) + */ + +void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) +{ + if (!dev || t < -1) { + WARN_ON(1); + return; + }; + + if (t == -1) + pr_debug("OMAP PM: remove max MPU wakeup latency constraint: " + "dev %s\n", dev_name(dev)); + else + pr_debug("OMAP PM: add max MPU wakeup latency constraint: " + "dev %s, t = %ld usec\n", dev_name(dev), t); + + /* + * For current Linux, this needs to map the MPU to a + * powerdomain, then go through the list of current max lat + * constraints on the MPU and find the smallest. If + * the latency constraint has changed, the code should + * recompute the state to enter for the next powerdomain + * state. + * + * TI CDP code can call constraint_set here. + */ +} + +void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) +{ + if (!dev || (agent_id != OCP_INITIATOR_AGENT && + agent_id != OCP_TARGET_AGENT)) { + WARN_ON(1); + return; + }; + + if (r == 0) + pr_debug("OMAP PM: remove min bus tput constraint: " + "dev %s for agent_id %d\n", dev_name(dev), agent_id); + else + pr_debug("OMAP PM: add min bus tput constraint: " + "dev %s for agent_id %d: rate %ld KiB\n", + dev_name(dev), agent_id, r); + + /* + * This code should model the interconnect and compute the + * required clock frequency, convert that to a VDD2 OPP ID, then + * set the VDD2 OPP appropriately. + * + * TI CDP code can call constraint_set here on the VDD2 OPP. + */ +} + +void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t) +{ + if (!dev || t < -1) { + WARN_ON(1); + return; + }; + + if (t == -1) + pr_debug("OMAP PM: remove max device latency constraint: " + "dev %s\n", dev_name(dev)); + else + pr_debug("OMAP PM: add max device latency constraint: " + "dev %s, t = %ld usec\n", dev_name(dev), t); + + /* + * For current Linux, this needs to map the device to a + * powerdomain, then go through the list of current max lat + * constraints on that powerdomain and find the smallest. If + * the latency constraint has changed, the code should + * recompute the state to enter for the next powerdomain + * state. Conceivably, this code should also determine + * whether to actually disable the device clocks or not, + * depending on how long it takes to re-enable the clocks. + * + * TI CDP code can call constraint_set here. + */ +} + +void omap_pm_set_max_sdma_lat(struct device *dev, long t) +{ + if (!dev || t < -1) { + WARN_ON(1); + return; + }; + + if (t == -1) + pr_debug("OMAP PM: remove max DMA latency constraint: " + "dev %s\n", dev_name(dev)); + else + pr_debug("OMAP PM: add max DMA latency constraint: " + "dev %s, t = %ld usec\n", dev_name(dev), t); + + /* + * For current Linux PM QOS params, this code should scan the + * list of maximum CPU and DMA latencies and select the + * smallest, then set cpu_dma_latency pm_qos_param + * accordingly. + * + * For future Linux PM QOS params, with separate CPU and DMA + * latency params, this code should just set the dma_latency param. + * + * TI CDP code can call constraint_set here. + */ + +} + + +/* + * DSP Bridge-specific constraints + */ + +const struct omap_opp *omap_pm_dsp_get_opp_table(void) +{ + pr_debug("OMAP PM: DSP request for OPP table\n"); + + /* + * Return DSP frequency table here: The final item in the + * array should have .rate = .opp_id = 0. + */ + + return NULL; +} + +void omap_pm_dsp_set_min_opp(u8 opp_id) +{ + if (opp_id == 0) { + WARN_ON(1); + return; + } + + pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id); + + /* + * + * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we + * can just test to see which is higher, the CPU's desired OPP + * ID or the DSP's desired OPP ID, and use whichever is + * highest. + * + * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP + * rate is keyed on MPU speed, not the OPP ID. So we need to + * map the OPP ID to the MPU speed for use with clk_set_rate() + * if it is higher than the current OPP clock rate. + * + */ +} + + +u8 omap_pm_dsp_get_opp(void) +{ + pr_debug("OMAP PM: DSP requests current DSP OPP ID\n"); + + /* + * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock + * + * CDP12.14+: + * Call clk_get_rate() on the OPP custom clock, map that to an + * OPP ID using the tables defined in board-*.c/chip-*.c files. + */ + + return 0; +} + +/* + * CPUFreq-originated constraint + * + * In the future, this should be handled by custom OPP clocktype + * functions. + */ + +struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void) +{ + pr_debug("OMAP PM: CPUFreq request for frequency table\n"); + + /* + * Return CPUFreq frequency table here: loop over + * all VDD1 clkrates, pull out the mpu_ck frequencies, build + * table + */ + + return NULL; +} + +void omap_pm_cpu_set_freq(unsigned long f) +{ + if (f == 0) { + WARN_ON(1); + return; + } + + pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n", + f); + + /* + * For l-o dev tree, determine whether MPU freq or DSP OPP id + * freq is higher. Find the OPP ID corresponding to the + * higher frequency. Call clk_round_rate() and clk_set_rate() + * on the OPP custom clock. + * + * CDP should just be able to set the VDD1 OPP clock rate here. + */ +} + +unsigned long omap_pm_cpu_get_freq(void) +{ + pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n"); + + /* + * Call clk_get_rate() on the mpu_ck. + */ + + return 0; +} + +/* + * Device context loss tracking + */ + +int omap_pm_get_dev_context_loss_count(struct device *dev) +{ + if (!dev) { + WARN_ON(1); + return -EINVAL; + }; + + pr_debug("OMAP PM: returning context loss count for dev %s\n", + dev_name(dev)); + + /* + * Map the device to the powerdomain. Return the powerdomain + * off counter. + */ + + return 0; +} + + +/* Should be called before clk framework init */ +int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table, + struct omap_opp *dsp_opp_table, + struct omap_opp *l3_opp_table) +{ + mpu_opps = mpu_opp_table; + dsp_opps = dsp_opp_table; + l3_opps = l3_opp_table; + return 0; +} + +/* Must be called after clock framework is initialized */ +int __init omap_pm_if_init(void) +{ + return 0; +} + +void omap_pm_if_exit(void) +{ + /* Deallocate CPUFreq frequency table here */ +} + -- cgit v1.2.3-70-g09d2 From 723884339f90a9c420783135168cc1045750eb5d Mon Sep 17 00:00:00 2001 From: Bhaskar Dutta Date: Thu, 3 Sep 2009 17:25:47 +0530 Subject: sctp: Sysctl configuration for IPv4 Address Scoping This patch introduces a new sysctl option to make IPv4 Address Scoping configurable . In networking environments where DNAT rules in iptables prerouting chains convert destination IP's to link-local/private IP addresses, SCTP connections fail to establish as the INIT chunk is dropped by the kernel due to address scope match failure. For example to support overlapping IP addresses (same IP address with different vlan id) a Layer-5 application listens on link local IP's, and there is a DNAT rule that maps the destination IP to a link local IP. Such applications never get the SCTP INIT if the address-scoping draft is strictly followed. This sysctl configuration allows SCTP to function in such unconventional networking environments. Sysctl options: 0 - Disable IPv4 address scoping draft altogether 1 - Enable IPv4 address scoping (default, current behavior) 2 - Enable address scoping but allow IPv4 private addresses in init/init-ack 3 - Enable address scoping but allow IPv4 link local address in init/init-ack Signed-off-by: Bhaskar Dutta Signed-off-by: Vlad Yasevich --- Documentation/networking/ip-sysctl.txt | 10 ++++++++++ include/net/sctp/constants.h | 7 +++++++ include/net/sctp/structs.h | 10 ++++++++++ net/sctp/bind_addr.c | 21 ++++++++++++++++++++- net/sctp/protocol.c | 11 ++++++----- net/sctp/sysctl.c | 12 ++++++++++++ 6 files changed, 65 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 4e9c6d7b4ef..fbe427a6580 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1297,6 +1297,16 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max sctp_wmem - vector of 3 INTEGERs: min, default, max See tcp_wmem for a description. +addr_scope_policy - INTEGER + Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00 + + 0 - Disable IPv4 address scoping + 1 - Enable IPv4 address scoping + 2 - Follow draft but allow IPv4 private addresses + 3 - Follow draft but allow IPv4 link local addresses + + Default: 1 + /proc/sys/net/core/* dev_weight - INTEGER diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h index af8c1508109..58f714a3b67 100644 --- a/include/net/sctp/constants.h +++ b/include/net/sctp/constants.h @@ -363,6 +363,13 @@ typedef enum { SCTP_SCOPE_UNUSABLE, /* IPv4 unusable addresses */ } sctp_scope_t; +typedef enum { + SCTP_SCOPE_POLICY_DISABLE, /* Disable IPv4 address scoping */ + SCTP_SCOPE_POLICY_ENABLE, /* Enable IPv4 address scoping */ + SCTP_SCOPE_POLICY_PRIVATE, /* Follow draft but allow IPv4 private addresses */ + SCTP_SCOPE_POLICY_LINK, /* Follow draft but allow IPv4 link local addresses */ +} sctp_scope_policy_t; + /* Based on IPv4 scoping , * SCTP IPv4 unusable addresses: 0.0.0.0/8, 224.0.0.0/4, 198.18.0.0/24, * 192.88.99.0/24. diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 993cfff9218..a48d80e77cd 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -219,6 +219,15 @@ extern struct sctp_globals { /* Flag to idicate if SCTP-AUTH is enabled */ int auth_enable; + /* + * Policy to control SCTP IPv4 address scoping + * 0 - Disable IPv4 address scoping + * 1 - Enable IPv4 address scoping + * 2 - Selectively allow only IPv4 private addresses + * 3 - Selectively allow only IPv4 link local address + */ + int ipv4_scope_policy; + /* Flag to indicate whether computing and verifying checksum * is disabled. */ int checksum_disable; @@ -252,6 +261,7 @@ extern struct sctp_globals { #define sctp_port_hashtable (sctp_globals.port_hashtable) #define sctp_local_addr_list (sctp_globals.local_addr_list) #define sctp_local_addr_lock (sctp_globals.addr_list_lock) +#define sctp_scope_policy (sctp_globals.ipv4_scope_policy) #define sctp_addip_enable (sctp_globals.addip_enable) #define sctp_addip_noauth (sctp_globals.addip_noauth_enable) #define sctp_prsctp_enable (sctp_globals.prsctp_enable) diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c index 6d5944a745d..13a6fba4107 100644 --- a/net/sctp/bind_addr.c +++ b/net/sctp/bind_addr.c @@ -510,9 +510,28 @@ int sctp_in_scope(const union sctp_addr *addr, sctp_scope_t scope) * of requested destination address, sender and receiver * SHOULD include all of its addresses with level greater * than or equal to L. + * + * Address scoping can be selectively controlled via sysctl + * option */ - if (addr_scope <= scope) + switch (sctp_scope_policy) { + case SCTP_SCOPE_POLICY_DISABLE: return 1; + case SCTP_SCOPE_POLICY_ENABLE: + if (addr_scope <= scope) + return 1; + break; + case SCTP_SCOPE_POLICY_PRIVATE: + if (addr_scope <= scope || SCTP_SCOPE_PRIVATE == addr_scope) + return 1; + break; + case SCTP_SCOPE_POLICY_LINK: + if (addr_scope <= scope || SCTP_SCOPE_LINK == addr_scope) + return 1; + break; + default: + break; + } return 0; } diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index a76da657244..60093be8385 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -431,16 +431,14 @@ static int sctp_v4_available(union sctp_addr *addr, struct sctp_sock *sp) * of requested destination address, sender and receiver * SHOULD include all of its addresses with level greater * than or equal to L. + * + * IPv4 scoping can be controlled through sysctl option + * net.sctp.addr_scope_policy */ static sctp_scope_t sctp_v4_scope(union sctp_addr *addr) { sctp_scope_t retval; - /* Should IPv4 scoping be a sysctl configurable option - * so users can turn it off (default on) for certain - * unconventional networking environments? - */ - /* Check for unusable SCTP addresses. */ if (IS_IPV4_UNUSABLE_ADDRESS(addr->v4.sin_addr.s_addr)) { retval = SCTP_SCOPE_UNUSABLE; @@ -1259,6 +1257,9 @@ SCTP_STATIC __init int sctp_init(void) /* Disable AUTH by default. */ sctp_auth_enable = 0; + /* Set SCOPE policy to enabled */ + sctp_scope_policy = SCTP_SCOPE_POLICY_ENABLE; + sctp_sysctl_register(); INIT_LIST_HEAD(&sctp_address_families); diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c index 63eabbc7129..ab7151da120 100644 --- a/net/sctp/sysctl.c +++ b/net/sctp/sysctl.c @@ -51,6 +51,7 @@ static int timer_max = 86400000; /* ms in one day */ static int int_max = INT_MAX; static int sack_timer_min = 1; static int sack_timer_max = 500; +static int addr_scope_max = 3; /* check sctp_scope_policy_t in include/net/sctp/constants.h for max entries */ extern int sysctl_sctp_mem[3]; extern int sysctl_sctp_rmem[3]; @@ -272,6 +273,17 @@ static ctl_table sctp_table[] = { .proc_handler = proc_dointvec, .strategy = sysctl_intvec }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "addr_scope_policy", + .data = &sctp_scope_policy, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &zero, + .extra2 = &addr_scope_max, + }, { .ctl_name = 0 } }; -- cgit v1.2.3-70-g09d2 From d0646f7b636d067d715fab52a2ba9c6f0f46b0d7 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 5 Sep 2009 12:50:43 -0400 Subject: ext4: Remove journal_checksum mount option and enable it by default There's no real cost for the journal checksum feature, and we should make sure it is enabled all the time. Signed-off-by: "Theodore Ts'o" --- Documentation/filesystems/ext4.txt | 8 +------- fs/ext4/ext4.h | 1 - fs/ext4/super.c | 20 ++++++-------------- 3 files changed, 7 insertions(+), 22 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 7be02ac5fa3..3e329dbac78 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -134,15 +134,9 @@ ro Mount filesystem read only. Note that ext4 will mount options "ro,noload" can be used to prevent writes to the filesystem. -journal_checksum Enable checksumming of the journal transactions. - This will allow the recovery code in e2fsck and the - kernel to detect corruption in the kernel. It is a - compatible change and will be ignored by older kernels. - journal_async_commit Commit block can be written to disk without waiting for descriptor blocks. If enabled older kernels cannot - mount the device. This will enable 'journal_checksum' - internally. + mount the device. journal=update Update the ext4 file system's journal to the current format. diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 81014f4ed22..4dc64ed58d2 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -711,7 +711,6 @@ struct ext4_inode_info { #define EXT4_MOUNT_QUOTA 0x80000 /* Some quota option set */ #define EXT4_MOUNT_USRQUOTA 0x100000 /* "old" user quota */ #define EXT4_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */ -#define EXT4_MOUNT_JOURNAL_CHECKSUM 0x800000 /* Journal checksums */ #define EXT4_MOUNT_JOURNAL_ASYNC_COMMIT 0x1000000 /* Journal Async Commit */ #define EXT4_MOUNT_I_VERSION 0x2000000 /* i_version support */ #define EXT4_MOUNT_DELALLOC 0x8000000 /* Delalloc support */ diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 4037fe0b5a5..f1815d3bcfd 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1280,11 +1280,9 @@ static int parse_options(char *options, struct super_block *sb, *journal_devnum = option; break; case Opt_journal_checksum: - set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM); - break; + break; /* Kept for backwards compatibility */ case Opt_journal_async_commit: set_opt(sbi->s_mount_opt, JOURNAL_ASYNC_COMMIT); - set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM); break; case Opt_noload: set_opt(sbi->s_mount_opt, NOLOAD); @@ -2751,20 +2749,14 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) goto failed_mount4; } - if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) { - jbd2_journal_set_features(sbi->s_journal, - JBD2_FEATURE_COMPAT_CHECKSUM, 0, + jbd2_journal_set_features(sbi->s_journal, + JBD2_FEATURE_COMPAT_CHECKSUM, 0, 0); + if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) + jbd2_journal_set_features(sbi->s_journal, 0, 0, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT); - } else if (test_opt(sb, JOURNAL_CHECKSUM)) { - jbd2_journal_set_features(sbi->s_journal, - JBD2_FEATURE_COMPAT_CHECKSUM, 0, 0); + else jbd2_journal_clear_features(sbi->s_journal, 0, 0, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT); - } else { - jbd2_journal_clear_features(sbi->s_journal, - JBD2_FEATURE_COMPAT_CHECKSUM, 0, - JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT); - } /* We have now updated the journal if required, so we can * validate the data journaling mode. */ -- cgit v1.2.3-70-g09d2 From a65cc60f6349fe91539f736dad8fb2398488e431 Mon Sep 17 00:00:00 2001 From: "ddiaz@cenditel.gob.ve" Date: Sat, 5 Sep 2009 16:28:06 -0430 Subject: ALSA: hda/realtek: Added support for CLEVO M540R subsystem, 6 channel + digital The model clevo-m540r was created with 6-channel and digital support. All functions verified except spdif. Tested with a VIT D2000 laptop which has: [lspci extract] Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) Subsystem: CLEVO/KAPOK Computer Device [1558:5409] [/proc/asound/card0/codec\#0 header] Codec: Realtek ALC883 Address: 0 Function Id: 0x1 Vendor Id: 0x10ec0883 Subsystem Id: 0x15585409 Revision Id: 0x100002 [Added a comment about HP mute and the model description by tiwai] Signed-off-by: Dhionel Diaz Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_realtek.c | 80 ++++++++++++++++++++++++++++ 2 files changed, 81 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 32d8cc05d15..97eebd63bed 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -152,6 +152,7 @@ ALC882/883/885/888/889 3stack-hp HP machines with 3stack (Lucknow, Samba boards) 6stack-dell Dell machines with 6stack (Inspiron 530) mitac Mitac 8252D + clevo-m540r Clevo M540R (6ch + digital) clevo-m720 Clevo M720 laptop series fujitsu-pi2515 Fujitsu AMILO Pi2515 fujitsu-xa3530 Fujitsu AMILO XA3530 diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f3d186a1e3d..e58d4c5d6c1 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -232,6 +232,7 @@ enum { ALC888_3ST_HP, ALC888_6ST_DELL, ALC883_MITAC, + ALC883_CLEVO_M540R, ALC883_CLEVO_M720, ALC883_FUJITSU_PI2515, ALC888_FUJITSU_XA3530, @@ -6656,6 +6657,52 @@ static struct hda_channel_mode alc882_3ST_6ch_modes[3] = { #define alc883_3ST_6ch_modes alc882_3ST_6ch_modes +/* + * 2ch mode + */ +static struct hda_verb alc883_3ST_ch2_clevo_init[] = { + { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { } /* end */ +}; + +/* + * 4ch mode + */ +static struct hda_verb alc883_3ST_ch4_clevo_init[] = { + { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +/* + * 6ch mode + */ +static struct hda_verb alc883_3ST_ch6_clevo_init[] = { + { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +static struct hda_channel_mode alc883_3ST_6ch_clevo_modes[3] = { + { 2, alc883_3ST_ch2_clevo_init }, + { 4, alc883_3ST_ch4_clevo_init }, + { 6, alc883_3ST_ch6_clevo_init }, +}; + + /* * 6ch mode */ @@ -8134,6 +8181,22 @@ static struct hda_verb alc883_mitac_verbs[] = { { } /* end */ }; +static struct hda_verb alc883_clevo_m540r_verbs[] = { + /* HP */ + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* Int speaker */ + /*{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},*/ + + /* enable unsolicited event */ + /* + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_MIC_EVENT | AC_USRSP_EN}, + */ + + { } /* end */ +}; + static struct hda_verb alc883_clevo_m720_verbs[] = { /* HP */ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, @@ -8670,6 +8733,7 @@ static const char *alc882_models[ALC882_MODEL_LAST] = { [ALC888_3ST_HP] = "3stack-hp", [ALC888_6ST_DELL] = "6stack-dell", [ALC883_MITAC] = "mitac", + [ALC883_CLEVO_M540R] = "clevo-m540r", [ALC883_CLEVO_M720] = "clevo-m720", [ALC883_FUJITSU_PI2515] = "fujitsu-pi2515", [ALC888_FUJITSU_XA3530] = "fujitsu-xa3530", @@ -8776,6 +8840,7 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = { SND_PCI_QUIRK(0x147b, 0x1083, "Abit IP35-PRO", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1558, 0x0721, "Clevo laptop M720R", ALC883_CLEVO_M720), SND_PCI_QUIRK(0x1558, 0x0722, "Clevo laptop M720SR", ALC883_CLEVO_M720), + SND_PCI_QUIRK(0x1558, 0x5409, "Clevo laptop M540R", ALC883_CLEVO_M540R), SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch), /* SND_PCI_QUIRK(0x161f, 0x2054, "Arima W820", ALC882_ARIMA), */ @@ -9264,6 +9329,21 @@ static struct alc_config_preset alc882_presets[] = { .channel_mode = alc883_3ST_2ch_modes, .input_mux = &alc883_capture_source, }, + [ALC883_CLEVO_M540R] = { + .mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer }, + .init_verbs = { alc883_init_verbs, alc883_clevo_m540r_verbs }, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .dig_out_nid = ALC883_DIGOUT_NID, + .dig_in_nid = ALC883_DIGIN_NID, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_clevo_modes), + .channel_mode = alc883_3ST_6ch_clevo_modes, + .need_dac_fix = 1, + .input_mux = &alc883_capture_source, + /* This machine has the hardware HP auto-muting, thus + * we need no software mute via unsol event + */ + }, [ALC883_CLEVO_M720] = { .mixers = { alc883_clevo_m720_mixer }, .init_verbs = { alc883_init_verbs, alc883_clevo_m720_verbs }, -- cgit v1.2.3-70-g09d2 From a68c4d11336610dc348620766119db09675707c2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 4 Sep 2009 12:19:36 +0200 Subject: ALSA: dummy - Fake buffer allocations Instead of allocating the real buffers, use a fake buffer and ignore read/write in the dummy driver so that we can save the resources. For mmap, a single page (unique to the direction, though) is reused to all buffers. When the app requires to read/write the real buffers, pass fake_buffer=0 module option at loading time. This will get back to the old behavior. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 7 ++ sound/drivers/dummy.c | 106 ++++++++++++++++++++++-- 2 files changed, 105 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index bb488b575de..ea16e7d184a 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -518,6 +518,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. pcm_substreams - Number of PCM substreams assigned to each PCM (default = 8, up to 16) hrtimer - Use hrtimer (=1, default) or system timer (=0) + fake_buffer - Fake buffer allocations (default = 1) When multiple PCM devices are created, snd-dummy gives different behavior to each PCM device: @@ -526,6 +527,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 2 = interleaved without mmap 3 = non-interleaved without mmap + As default, snd-dummy drivers doesn't allocate the real buffers + but either ignores read/write or mmap a single dummy page to all + buffer pages, in order to save the resouces. If your apps need + the read/ written buffer data to be consistent, pass fake_buffer=0 + option. + The power-management is supported. Module snd-echo3g diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c index e8e29bfb85e..2ee6c8ebe25 100644 --- a/sound/drivers/dummy.c +++ b/sound/drivers/dummy.c @@ -153,6 +153,7 @@ static int pcm_substreams[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 8}; #ifdef CONFIG_HIGH_RES_TIMERS static int hrtimer = 1; #endif +static int fake_buffer = 1; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for dummy soundcard."); @@ -166,6 +167,8 @@ module_param_array(pcm_substreams, int, NULL, 0444); MODULE_PARM_DESC(pcm_substreams, "PCM substreams # (1-16) for dummy driver."); //module_param_array(midi_devs, int, NULL, 0444); //MODULE_PARM_DESC(midi_devs, "MIDI devices # (0-2) for dummy driver."); +module_param(fake_buffer, bool, 0444); +MODULE_PARM_DESC(fake_buffer, "Fake buffer allocations."); #ifdef CONFIG_HIGH_RES_TIMERS module_param(hrtimer, bool, 0644); MODULE_PARM_DESC(hrtimer, "Use hrtimer as the timer source."); @@ -481,11 +484,8 @@ static int dummy_pcm_trigger(struct snd_pcm_substream *substream, int cmd) static int dummy_pcm_prepare(struct snd_pcm_substream *substream) { - struct snd_pcm_runtime *runtime = substream->runtime; struct snd_dummy *dummy = snd_pcm_substream_chip(substream); - snd_pcm_format_set_silence(runtime->format, runtime->dma_area, - bytes_to_samples(runtime, runtime->dma_bytes)); return dummy->timer_ops->prepare(substream); } @@ -518,12 +518,19 @@ static struct snd_pcm_hardware dummy_pcm_hardware = { static int dummy_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { + if (fake_buffer) { + /* runtime->dma_bytes has to be set manually to allow mmap */ + substream->runtime->dma_bytes = params_buffer_bytes(hw_params); + return 0; + } return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); } static int dummy_pcm_hw_free(struct snd_pcm_substream *substream) { + if (fake_buffer) + return 0; return snd_pcm_lib_free_pages(substream); } @@ -570,6 +577,60 @@ static int dummy_pcm_close(struct snd_pcm_substream *substream) return 0; } +/* + * dummy buffer handling + */ + +static void *dummy_page[2]; + +static void free_fake_buffer(void) +{ + if (fake_buffer) { + int i; + for (i = 0; i < 2; i++) + if (dummy_page[i]) { + free_page((unsigned long)dummy_page[i]); + dummy_page[i] = NULL; + } + } +} + +static int alloc_fake_buffer(void) +{ + int i; + + if (!fake_buffer) + return 0; + for (i = 0; i < 2; i++) { + dummy_page[i] = (void *)get_zeroed_page(GFP_KERNEL); + if (!dummy_page[i]) { + free_fake_buffer(); + return -ENOMEM; + } + } + return 0; +} + +static int dummy_pcm_copy(struct snd_pcm_substream *substream, + int channel, snd_pcm_uframes_t pos, + void __user *dst, snd_pcm_uframes_t count) +{ + return 0; /* do nothing */ +} + +static int dummy_pcm_silence(struct snd_pcm_substream *substream, + int channel, snd_pcm_uframes_t pos, + snd_pcm_uframes_t count) +{ + return 0; /* do nothing */ +} + +static struct page *dummy_pcm_page(struct snd_pcm_substream *substream, + unsigned long offset) +{ + return virt_to_page(dummy_page[substream->stream]); /* the same page */ +} + static struct snd_pcm_ops dummy_pcm_ops = { .open = dummy_pcm_open, .close = dummy_pcm_close, @@ -581,10 +642,25 @@ static struct snd_pcm_ops dummy_pcm_ops = { .pointer = dummy_pcm_pointer, }; +static struct snd_pcm_ops dummy_pcm_ops_no_buf = { + .open = dummy_pcm_open, + .close = dummy_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = dummy_pcm_hw_params, + .hw_free = dummy_pcm_hw_free, + .prepare = dummy_pcm_prepare, + .trigger = dummy_pcm_trigger, + .pointer = dummy_pcm_pointer, + .copy = dummy_pcm_copy, + .silence = dummy_pcm_silence, + .page = dummy_pcm_page, +}; + static int __devinit snd_card_dummy_pcm(struct snd_dummy *dummy, int device, int substreams) { struct snd_pcm *pcm; + struct snd_pcm_ops *ops; int err; err = snd_pcm_new(dummy->card, "Dummy PCM", device, @@ -592,14 +668,21 @@ static int __devinit snd_card_dummy_pcm(struct snd_dummy *dummy, int device, if (err < 0) return err; dummy->pcm = pcm; - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &dummy_pcm_ops); - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &dummy_pcm_ops); + if (fake_buffer) + ops = &dummy_pcm_ops_no_buf; + else + ops = &dummy_pcm_ops; + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ops); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, ops); pcm->private_data = dummy; pcm->info_flags = 0; strcpy(pcm->name, "Dummy PCM"); - snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, - snd_dma_continuous_data(GFP_KERNEL), - 0, 64*1024); + if (!fake_buffer) { + snd_pcm_lib_preallocate_pages_for_all(pcm, + SNDRV_DMA_TYPE_CONTINUOUS, + snd_dma_continuous_data(GFP_KERNEL), + 0, 64*1024); + } return 0; } @@ -822,6 +905,7 @@ static void snd_dummy_unregister_all(void) for (i = 0; i < ARRAY_SIZE(devices); ++i) platform_device_unregister(devices[i]); platform_driver_unregister(&snd_dummy_driver); + free_fake_buffer(); } static int __init alsa_card_dummy_init(void) @@ -832,6 +916,12 @@ static int __init alsa_card_dummy_init(void) if (err < 0) return err; + err = alloc_fake_buffer(); + if (err < 0) { + platform_driver_unregister(&snd_dummy_driver); + return err; + } + cards = 0; for (i = 0; i < SNDRV_CARDS; i++) { struct platform_device *device; -- cgit v1.2.3-70-g09d2 From 30b3710105be0ba6bbdb7d7d126af76246b02eba Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 4 Sep 2009 17:44:51 -0700 Subject: kmemleak: add clear command support In an ideal world your kmemleak output will be small, when its not (usually during initial bootup) you can use the clear command to ingore previously reported and unreferenced kmemleak objects. We do this by painting all currently reported unreferenced objects grey. We paint them grey instead of black to allow future scans on the same objects as such objects could still potentially reference newly allocated objects in the future. To test a critical section on demand with a clean /sys/kernel/debug/kmemleak you can do: echo clear > /sys/kernel/debug/kmemleak test your kernel or modules echo scan > /sys/kernel/debug/kmemleak Then as usual to get your report with: cat /sys/kernel/debug/kmemleak Signed-off-by: Luis R. Rodriguez Signed-off-by: Catalin Marinas --- Documentation/kmemleak.txt | 30 ++++++++++++++++++++++++++++++ mm/kmemleak.c | 26 ++++++++++++++++++++++++++ 2 files changed, 56 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt index c223785339b..34f6638aa5a 100644 --- a/Documentation/kmemleak.txt +++ b/Documentation/kmemleak.txt @@ -27,6 +27,13 @@ To trigger an intermediate memory scan: # echo scan > /sys/kernel/debug/kmemleak +To clear the list of all current possible memory leaks: + + # echo clear > /sys/kernel/debug/kmemleak + +New leaks will then come up upon reading /sys/kernel/debug/kmemleak +again. + Note that the orphan objects are listed in the order they were allocated and one object at the beginning of the list may cause other subsequent objects to be reported as orphan. @@ -42,6 +49,8 @@ Memory scanning parameters can be modified at run-time by writing to the scan= - set the automatic memory scanning period in seconds (default 600, 0 to stop the automatic scanning) scan - trigger a memory scan + clear - clear list of current memory leak suspects, done by + marking all current reported unreferenced objects grey dump= - dump information about the object found at Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on @@ -87,6 +96,27 @@ avoid this, kmemleak can also store the number of values pointing to an address inside the block address range that need to be found so that the block is not considered a leak. One example is __vmalloc(). +Testing specific sections with kmemleak +--------------------------------------- + +Upon initial bootup your /sys/kernel/debug/kmemleak output page may be +quite extensive. This can also be the case if you have very buggy code +when doing development. To work around these situations you can use the +'clear' command to clear all reported unreferenced objects from the +/sys/kernel/debug/kmemleak output. By issuing a 'scan' after a 'clear' +you can find new unreferenced objects; this should help with testing +specific sections of code. + +To test a critical section on demand with a clean kmemleak do: + + # echo clear > /sys/kernel/debug/kmemleak + ... test your kernel or modules ... + # echo scan > /sys/kernel/debug/kmemleak + +Then as usual to get your report with: + + # cat /sys/kernel/debug/kmemleak + Kmemleak API ------------ diff --git a/mm/kmemleak.c b/mm/kmemleak.c index f5042b4a7b9..c17dbc76fb7 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1420,6 +1420,28 @@ static int dump_str_object_info(const char *str) return 0; } +/* + * We use grey instead of black to ensure we can do future scans on the same + * objects. If we did not do future scans these black objects could + * potentially contain references to newly allocated objects in the future and + * we'd end up with false positives. + */ +static void kmemleak_clear(void) +{ + struct kmemleak_object *object; + unsigned long flags; + + rcu_read_lock(); + list_for_each_entry_rcu(object, &object_list, object_list) { + spin_lock_irqsave(&object->lock, flags); + if ((object->flags & OBJECT_REPORTED) && + unreferenced_object(object)) + object->min_count = 0; + spin_unlock_irqrestore(&object->lock, flags); + } + rcu_read_unlock(); +} + /* * File write operation to configure kmemleak at run-time. The following * commands can be written to the /sys/kernel/debug/kmemleak file: @@ -1431,6 +1453,8 @@ static int dump_str_object_info(const char *str) * scan=... - set the automatic memory scanning period in seconds (0 to * disable it) * scan - trigger a memory scan + * clear - mark all current reported unreferenced kmemleak objects as + * grey to ignore printing them * dump=... - dump information about the object found at the given address */ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf, @@ -1472,6 +1496,8 @@ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf, } } else if (strncmp(buf, "scan", 4) == 0) kmemleak_scan(); + else if (strncmp(buf, "clear", 5) == 0) + kmemleak_clear(); else if (strncmp(buf, "dump=", 5) == 0) ret = dump_str_object_info(buf + 5); else -- cgit v1.2.3-70-g09d2 From 4d8cd26849737e141ff0aa23fedacef4ea76ea4f Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 8 Sep 2009 12:09:47 -0700 Subject: wireless: mark prism54 as deprecated and mark for removal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The preferred module is p54pci which also supports FullMAC PCI / Cardbus devices. We schedule removal for 2.6.34. Reason to remove this is no one really is testing prism54 anymore, and while it works p54pci provides support for the same hardware. It should be noted I have been told some FullMAC devices may not have worked with the SoftMAC driver but to date we have yet to recieve a single bug report regarding this. If there are users out there please let us know! Cc: aquilaver@yahoo.com Cc: linux-kernel@vger.kernel.org Cc: Dan Williams Cc: Kai Engert Cc: Jean Tourrilhes Cc: Tim de Waal Cc: Roy Marples Cc: Alan Cox Cc: Christian Lamparter Cc: Björn Steinbrink Cc: Tim Gardner Cc: Larry Finger Cc: Johannes Berg Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- Documentation/feature-removal-schedule.txt | 29 +++++++++++++++ drivers/net/wireless/Kconfig | 57 +++++++++--------------------- 2 files changed, 45 insertions(+), 41 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 09e031c5588..ad522e3d3d8 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -6,6 +6,35 @@ be removed from this file. --------------------------- +What: PRISM54 +When: 2.6.34 + +Why: prism54 FullMAC PCI / Cardbus devices used to be supported only by the + prism54 wireless driver. After Intersil stopped selling these + devices in preference for the newer more flexible SoftMAC devices + a SoftMAC device driver was required and prism54 did not support + them. The p54pci driver now exists and has been present in the kernel for + a while. This driver supports both SoftMAC devices and FullMAC devices. + The main difference between these devices was the amount of memory which + could be used for the firmware. The SoftMAC devices support a smaller + amount of memory. Because of this the SoftMAC firmware fits into FullMAC + devices's memory. p54pci supports not only PCI / Cardbus but also USB + and SPI. Since p54pci supports all devices prism54 supports + you will have a conflict. I'm not quite sure how distributions are + handling this conflict right now. prism54 was kept around due to + claims users may experience issues when using the SoftMAC driver. + Time has passed users have not reported issues. If you use prism54 + and for whatever reason you cannot use p54pci please let us know! + E-mail us at: linux-wireless@vger.kernel.org + + For more information see the p54 wiki page: + + http://wireless.kernel.org/en/users/Drivers/p54 + +Who: Luis R. Rodriguez + +--------------------------- + What: IRQF_SAMPLE_RANDOM Check: IRQF_SAMPLE_RANDOM When: July 2009 diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index a8871a84d87..ad89d23968d 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -275,51 +275,26 @@ config PCMCIA_WL3501 micro support for ethtool. config PRISM54 - tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' + tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)' depends on PCI && EXPERIMENTAL && WLAN_80211 select WIRELESS_EXT select FW_LOADER ---help--- - Enable PCI and Cardbus support for the following chipset based cards: - - ISL3880 - Prism GT 802.11 b/g - ISL3877 - Prism Indigo 802.11 a - ISL3890 - Prism Duette 802.11 a/b/g - - For a complete list of supported cards visit . - Here is the latest confirmed list of supported cards: - - 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) - Allnet ALL0271 PCI Card - Compex WL54G Cardbus Card - Corega CG-WLCB54GT Cardbus Card - D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650 - I-O Data WN-G54/CB Cardbus Card - Kobishi XG-300 aka Z-Com Cardbus Card - Netgear WG511 Cardbus Card - Ovislink WL-5400PCI PCI Card - Peabird WLG-PCI PCI Card - Sitecom WL-100i Cardbus Card - Sitecom WL-110i PCI Card - SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card - SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card - SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card - Z-Com XG-900 PCI Card - Zyxel G-100 Cardbus Card - - If you enable this you will need a firmware file as well. - You will need to copy this to /usr/lib/hotplug/firmware/isl3890. - You can get this non-GPL'd firmware file from the Prism54 project page: - - You will also need the /etc/hotplug/firmware.agent script from - a current hotplug package. - - Note: You need a motherboard with DMA support to use any of these cards - - If you want to compile the driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . - The module will be called prism54. + This enables support for FullMAC PCI/Cardbus prism54 devices. This + driver is now deprecated in favor for the SoftMAC driver, p54pci. + p54pci supports FullMAC PCI/Cardbus devices as well. For details on + the scheduled removal of this driver on the kernel see the feature + removal schedule: + + Documentation/feature-removal-schedule.txt + + For more information refer to the p54 wiki: + + http://wireless.kernel.org/en/users/Drivers/p54 + + Note: You need a motherboard with DMA support to use any of these cards + + When built as module you get the module prism54 config USB_ZD1201 tristate "USB ZD1201 based Wireless device support" -- cgit v1.2.3-70-g09d2 From 711d57796f5ce2d02d6e62c9034afbb16aedda31 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 27 Jul 2009 23:37:48 +0300 Subject: PCI: expose function reset capability in sysfs Some devices allow an individual function to be reset without affecting other functions in the same device: that's what pci_reset_function does. For devices that have this support, expose reset attribite in sysfs. This is useful e.g. for virtualization, where a qemu userspace process wants to reset the device when the guest is reset, to emulate machine reboot as closely as possible. Acked-by: Greg Kroah-Hartman Signed-off-by: Michael S. Tsirkin Signed-off-by: Jesse Barnes --- Documentation/ABI/testing/sysfs-bus-pci | 10 +++++++++ drivers/pci/pci-sysfs.c | 37 +++++++++++++++++++++++++++++++++ drivers/pci/pci.c | 16 ++++++++++++++ drivers/pci/pci.h | 1 + include/linux/pci.h | 1 + 5 files changed, 65 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 6bf68053e4b..25be3250f7d 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -84,6 +84,16 @@ Description: from this part of the device tree. Depends on CONFIG_HOTPLUG. +What: /sys/bus/pci/devices/.../reset +Date: July 2009 +Contact: Michael S. Tsirkin +Description: + Some devices allow an individual function to be reset + without affecting other functions in the same device. + For devices that have this support, a file named reset + will be present in sysfs. Writing 1 to this file + will perform reset. + What: /sys/bus/pci/devices/.../vpd Date: February 2008 Contact: Ben Hutchings diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 85ebd02a64a..0f6382f090e 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -916,6 +916,24 @@ int __attribute__ ((weak)) pcibios_add_platform_entries(struct pci_dev *dev) return 0; } +static ssize_t reset_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct pci_dev *pdev = to_pci_dev(dev); + unsigned long val; + ssize_t result = strict_strtoul(buf, 0, &val); + + if (result < 0) + return result; + + if (val != 1) + return -EINVAL; + return pci_reset_function(pdev); +} + +static struct device_attribute reset_attr = __ATTR(reset, 0200, NULL, reset_store); + static int pci_create_capabilities_sysfs(struct pci_dev *dev) { int retval; @@ -943,7 +961,22 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev) /* Active State Power Management */ pcie_aspm_create_sysfs_dev_files(dev); + if (!pci_probe_reset_function(dev)) { + retval = device_create_file(&dev->dev, &reset_attr); + if (retval) + goto error; + dev->reset_fn = 1; + } return 0; + +error: + pcie_aspm_remove_sysfs_dev_files(dev); + if (dev->vpd && dev->vpd->attr) { + sysfs_remove_bin_file(&dev->dev.kobj, dev->vpd->attr); + kfree(dev->vpd->attr); + } + + return retval; } int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) @@ -1037,6 +1070,10 @@ static void pci_remove_capabilities_sysfs(struct pci_dev *dev) } pcie_aspm_remove_sysfs_dev_files(dev); + if (dev->reset_fn) { + device_remove_file(&dev->dev, &reset_attr); + dev->reset_fn = 0; + } } /** diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 7b70312181d..7d55039ffa0 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2261,6 +2261,22 @@ int __pci_reset_function(struct pci_dev *dev) } EXPORT_SYMBOL_GPL(__pci_reset_function); +/** + * pci_probe_reset_function - check whether the device can be safely reset + * @dev: PCI device to reset + * + * Some devices allow an individual function to be reset without affecting + * other functions in the same device. The PCI device must be responsive + * to PCI config space in order to use this function. + * + * Returns 0 if the device function can be reset or negative if the + * device doesn't support resetting a single function. + */ +int pci_probe_reset_function(struct pci_dev *dev) +{ + return pci_dev_reset(dev, 1); +} + /** * pci_reset_function - quiesce and reset a PCI device function * @dev: PCI device to reset diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 5ff4d25bf0e..73d9d92715a 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -16,6 +16,7 @@ extern void pci_cleanup_rom(struct pci_dev *dev); extern int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma); #endif +int pci_probe_reset_function(struct pci_dev *dev); /** * struct pci_platform_pm_ops - Firmware PM callbacks diff --git a/include/linux/pci.h b/include/linux/pci.h index 115fb7ba508..a90f9402079 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -276,6 +276,7 @@ struct pci_dev { unsigned int state_saved:1; unsigned int is_physfn:1; unsigned int is_virtfn:1; + unsigned int reset_fn:1; pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ -- cgit v1.2.3-70-g09d2 From fe14acd4e7c8178dfb172c1e7a88356657378128 Mon Sep 17 00:00:00 2001 From: Mike Mason Date: Thu, 30 Jul 2009 15:39:29 -0700 Subject: PCI: document PCIe fundamental reset interfaces The attached patch updates the Documentation/PCI/pci-error-recovery.txt file with changes related to this new bit field, as well a few unrelated updates. Signed-off-by: Linas Vepstas Signed-off-by: Mike Mason Signed-off-by: Richard Lary Signed-off-by: Jesse Barnes --- Documentation/PCI/pci-error-recovery.txt | 119 ++++++++++++++++++++----------- 1 file changed, 77 insertions(+), 42 deletions(-) (limited to 'Documentation') diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt index 6650af43252..e83f2ea7641 100644 --- a/Documentation/PCI/pci-error-recovery.txt +++ b/Documentation/PCI/pci-error-recovery.txt @@ -4,15 +4,17 @@ February 2, 2006 Current document maintainer: - Linas Vepstas + Linas Vepstas + updated by Richard Lary + and Mike Mason on 27-Jul-2009 Many PCI bus controllers are able to detect a variety of hardware PCI errors on the bus, such as parity errors on the data and address busses, as well as SERR and PERR errors. Some of the more advanced chipsets are able to deal with these errors; these include PCI-E chipsets, -and the PCI-host bridges found on IBM Power4 and Power5-based pSeries -boxes. A typical action taken is to disconnect the affected device, +and the PCI-host bridges found on IBM Power4, Power5 and Power6-based +pSeries boxes. A typical action taken is to disconnect the affected device, halting all I/O to it. The goal of a disconnection is to avoid system corruption; for example, to halt system memory corruption due to DMA's to "wild" addresses. Typically, a reconnection mechanism is also @@ -37,10 +39,11 @@ is forced by the need to handle multi-function devices, that is, devices that have multiple device drivers associated with them. In the first stage, each driver is allowed to indicate what type of reset it desires, the choices being a simple re-enabling of I/O -or requesting a hard reset (a full electrical #RST of the PCI card). -If any driver requests a full reset, that is what will be done. +or requesting a slot reset. -After a full reset and/or a re-enabling of I/O, all drivers are +If any driver requests a slot reset, that is what will be done. + +After a reset and/or a re-enabling of I/O, all drivers are again notified, so that they may then perform any device setup/config that may be required. After these have all completed, a final "resume normal operations" event is sent out. @@ -101,7 +104,7 @@ if it implements any, it must implement error_detected(). If a callback is not implemented, the corresponding feature is considered unsupported. For example, if mmio_enabled() and resume() aren't there, then it is assumed that the driver is not doing any direct recovery and requires -a reset. If link_reset() is not implemented, the card is assumed as +a slot reset. If link_reset() is not implemented, the card is assumed to not care about link resets. Typically a driver will want to know about a slot_reset(). @@ -111,7 +114,7 @@ sequence described below. STEP 0: Error Event ------------------- -PCI bus error is detect by the PCI hardware. On powerpc, the slot +A PCI bus error is detected by the PCI hardware. On powerpc, the slot is isolated, in that all I/O is blocked: all reads return 0xffffffff, all writes are ignored. @@ -139,7 +142,7 @@ The driver must return one of the following result codes: a chance to extract some diagnostic information (see mmio_enable, below). - PCI_ERS_RESULT_NEED_RESET: - Driver returns this if it can't recover without a hard + Driver returns this if it can't recover without a slot reset. - PCI_ERS_RESULT_DISCONNECT: Driver returns this if it doesn't want to recover at all. @@ -169,11 +172,11 @@ is STEP 6 (Permanent Failure). >>> The current powerpc implementation doesn't much care if the device >>> attempts I/O at this point, or not. I/O's will fail, returning ->>> a value of 0xff on read, and writes will be dropped. If the device ->>> driver attempts more than 10K I/O's to a frozen adapter, it will ->>> assume that the device driver has gone into an infinite loop, and ->>> it will panic the kernel. There doesn't seem to be any other ->>> way of stopping a device driver that insists on spinning on I/O. +>>> a value of 0xff on read, and writes will be dropped. If more than +>>> EEH_MAX_FAILS I/O's are attempted to a frozen adapter, EEH +>>> assumes that the device driver has gone into an infinite loop +>>> and prints an error to syslog. A reboot is then required to +>>> get the device working again. STEP 2: MMIO Enabled ------------------- @@ -182,15 +185,14 @@ DMA), and then calls the mmio_enabled() callback on all affected device drivers. This is the "early recovery" call. IOs are allowed again, but DMA is -not (hrm... to be discussed, I prefer not), with some restrictions. This -is NOT a callback for the driver to start operations again, only to -peek/poke at the device, extract diagnostic information, if any, and -eventually do things like trigger a device local reset or some such, -but not restart operations. This is callback is made if all drivers on -a segment agree that they can try to recover and if no automatic link reset -was performed by the HW. If the platform can't just re-enable IOs without -a slot reset or a link reset, it wont call this callback, and instead -will have gone directly to STEP 3 (Link Reset) or STEP 4 (Slot Reset) +not, with some restrictions. This is NOT a callback for the driver to +start operations again, only to peek/poke at the device, extract diagnostic +information, if any, and eventually do things like trigger a device local +reset or some such, but not restart operations. This callback is made if +all drivers on a segment agree that they can try to recover and if no automatic +link reset was performed by the HW. If the platform can't just re-enable IOs +without a slot reset or a link reset, it will not call this callback, and +instead will have gone directly to STEP 3 (Link Reset) or STEP 4 (Slot Reset) >>> The following is proposed; no platform implements this yet: >>> Proposal: All I/O's should be done _synchronously_ from within @@ -228,9 +230,6 @@ proceeds to either STEP3 (Link Reset) or to STEP 5 (Resume Operations). If any driver returned PCI_ERS_RESULT_NEED_RESET, then the platform proceeds to STEP 4 (Slot Reset) ->>> The current powerpc implementation does not implement this callback. - - STEP 3: Link Reset ------------------ The platform resets the link, and then calls the link_reset() callback @@ -253,16 +252,33 @@ The platform then proceeds to either STEP 4 (Slot Reset) or STEP 5 >>> The current powerpc implementation does not implement this callback. - STEP 4: Slot Reset ------------------ -The platform performs a soft or hard reset of the device, and then -calls the slot_reset() callback. -A soft reset consists of asserting the adapter #RST line and then +In response to a return value of PCI_ERS_RESULT_NEED_RESET, the +the platform will peform a slot reset on the requesting PCI device(s). +The actual steps taken by a platform to perform a slot reset +will be platform-dependent. Upon completion of slot reset, the +platform will call the device slot_reset() callback. + +Powerpc platforms implement two levels of slot reset: +soft reset(default) and fundamental(optional) reset. + +Powerpc soft reset consists of asserting the adapter #RST line and then restoring the PCI BAR's and PCI configuration header to a state that is equivalent to what it would be after a fresh system power-on followed by power-on BIOS/system firmware initialization. +Soft reset is also known as hot-reset. + +Powerpc fundamental reset is supported by PCI Express cards only +and results in device's state machines, hardware logic, port states and +configuration registers to initialize to their default conditions. + +For most PCI devices, a soft reset will be sufficient for recovery. +Optional fundamental reset is provided to support a limited number +of PCI Express PCI devices for which a soft reset is not sufficient +for recovery. + If the platform supports PCI hotplug, then the reset might be performed by toggling the slot electrical power off/on. @@ -274,10 +290,12 @@ may result in hung devices, kernel panics, or silent data corruption. This call gives drivers the chance to re-initialize the hardware (re-download firmware, etc.). At this point, the driver may assume -that he card is in a fresh state and is fully functional. In -particular, interrupt generation should work normally. +that the card is in a fresh state and is fully functional. The slot +is unfrozen and the driver has full access to PCI config space, +memory mapped I/O space and DMA. Interrupts (Legacy, MSI, or MSI-X) +will also be available. -Drivers should not yet restart normal I/O processing operations +Drivers should not restart normal I/O processing operations at this point. If all device drivers report success on this callback, the platform will call resume() to complete the sequence, and let the driver restart normal I/O processing. @@ -302,11 +320,21 @@ driver performs device init only from PCI function 0: - PCI_ERS_RESULT_DISCONNECT Same as above. +Drivers for PCI Express cards that require a fundamental reset must +set the needs_freset bit in the pci_dev structure in their probe function. +For example, the QLogic qla2xxx driver sets the needs_freset bit for certain +PCI card types: + ++ /* Set EEH reset type to fundamental if required by hba */ ++ if (IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) ++ pdev->needs_freset = 1; ++ + Platform proceeds either to STEP 5 (Resume Operations) or STEP 6 (Permanent Failure). ->>> The current powerpc implementation does not currently try a ->>> power-cycle reset if the driver returned PCI_ERS_RESULT_DISCONNECT. +>>> The current powerpc implementation does not try a power-cycle +>>> reset if the driver returned PCI_ERS_RESULT_DISCONNECT. >>> However, it probably should. @@ -348,7 +376,7 @@ software errors. Conclusion; General Remarks --------------------------- -The way those callbacks are called is platform policy. A platform with +The way the callbacks are called is platform policy. A platform with no slot reset capability may want to just "ignore" drivers that can't recover (disconnect them) and try to let other cards on the same segment recover. Keep in mind that in most real life cases, though, there will @@ -361,8 +389,8 @@ That is, the recovery API only requires that: - There is no guarantee that interrupt delivery can proceed from any device on the segment starting from the error detection and until the -resume callback is sent, at which point interrupts are expected to be -fully operational. +slot_reset callback is called, at which point interrupts are expected +to be fully operational. - There is no guarantee that interrupt delivery is stopped, that is, a driver that gets an interrupt after detecting an error, or that detects @@ -381,16 +409,23 @@ anyway :) >>> Implementation details for the powerpc platform are discussed in >>> the file Documentation/powerpc/eeh-pci-error-recovery.txt ->>> As of this writing, there are six device drivers with patches ->>> implementing error recovery. Not all of these patches are in +>>> As of this writing, there is a growing list of device drivers with +>>> patches implementing error recovery. Not all of these patches are in >>> mainline yet. These may be used as "examples": >>> ->>> drivers/scsi/ipr.c ->>> drivers/scsi/sym53cxx_2 +>>> drivers/scsi/ipr +>>> drivers/scsi/sym53c8xx_2 +>>> drivers/scsi/qla2xxx +>>> drivers/scsi/lpfc +>>> drivers/next/bnx2.c >>> drivers/next/e100.c >>> drivers/net/e1000 +>>> drivers/net/e1000e >>> drivers/net/ixgb +>>> drivers/net/ixgbe +>>> drivers/net/cxgb3 >>> drivers/net/s2io.c +>>> drivers/net/qlge The End ------- -- cgit v1.2.3-70-g09d2 From 0737c4e4897ecae4cce3db0cc075efad791e1c21 Mon Sep 17 00:00:00 2001 From: Tiago Vignatti Date: Sun, 16 Aug 2009 18:09:36 +0300 Subject: PCI/VGA: add VGA arbitration documentation Document the new VGA arbiter. Signed-off-by: Tiago Vignatti Signed-off-by: Jesse Barnes --- Documentation/vgaarbiter.txt | 194 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 194 insertions(+) create mode 100644 Documentation/vgaarbiter.txt (limited to 'Documentation') diff --git a/Documentation/vgaarbiter.txt b/Documentation/vgaarbiter.txt new file mode 100644 index 00000000000..987f9b0a5ec --- /dev/null +++ b/Documentation/vgaarbiter.txt @@ -0,0 +1,194 @@ + +VGA Arbiter +=========== + +Graphic devices are accessed through ranges in I/O or memory space. While most +modern devices allow relocation of such ranges, some "Legacy" VGA devices +implemented on PCI will typically have the same "hard-decoded" addresses as +they did on ISA. For more details see "PCI Bus Binding to IEEE Std 1275-1994 +Standard for Boot (Initialization Configuration) Firmware Revision 2.1" +Section 7, Legacy Devices. + +The Resource Access Control (RAC) module inside the X server [0] existed for +the legacy VGA arbitration task (besides other bus management tasks) when more +than one legacy device co-exists on the same machine. But the problem happens +when these devices are trying to be accessed by different userspace clients +(e.g. two server in parallel). Their address assignments conflict. Moreover, +ideally, being an userspace application, it is not the role of the the X +server to control bus resources. Therefore an arbitration scheme outside of +the X server is needed to control the sharing of these resources. This +document introduces the operation of the VGA arbiter implemented for Linux +kernel. + +---------------------------------------------------------------------------- + +I. Details and Theory of Operation + I.1 vgaarb + I.2 libpciaccess + I.3 xf86VGAArbiter (X server implementation) +II. Credits +III.References + + +I. Details and Theory of Operation +================================== + +I.1 vgaarb +---------- + +The vgaarb is a module of the Linux Kernel. When it is initially loaded, it +scans all PCI devices and adds the VGA ones inside the arbitration. The +arbiter then enables/disables the decoding on different devices of the VGA +legacy instructions. Device which do not want/need to use the arbiter may +explicitly tell it by calling vga_set_legacy_decoding(). + +The kernel exports a char device interface (/dev/vga_arbiter) to the clients, +which has the following semantics: + + open : open user instance of the arbiter. By default, it's attached to + the default VGA device of the system. + + close : close user instance. Release locks made by the user + + read : return a string indicating the status of the target like: + + ",decodes=,owns=,locks= (ic,mc)" + + An IO state string is of the form {io,mem,io+mem,none}, mc and + ic are respectively mem and io lock counts (for debugging/ + diagnostic only). "decodes" indicate what the card currently + decodes, "owns" indicates what is currently enabled on it, and + "locks" indicates what is locked by this card. If the card is + unplugged, we get "invalid" then for card_ID and an -ENODEV + error is returned for any command until a new card is targeted. + + + write : write a command to the arbiter. List of commands: + + target : switch target to card (see below) + lock : acquires locks on target ("none" is an invalid io_state) + trylock : non-blocking acquire locks on target (returns EBUSY if + unsuccessful) + unlock : release locks on target + unlock all : release all locks on target held by this user (not + implemented yet) + decodes : set the legacy decoding attributes for the card + + poll : event if something changes on any card (not just the + target) + + card_ID is of the form "PCI:domain:bus:dev.fn". It can be set to "default" + to go back to the system default card (TODO: not implemented yet). Currently, + only PCI is supported as a prefix, but the userland API may support other bus + types in the future, even if the current kernel implementation doesn't. + +Note about locks: + +The driver keeps track of which user has which locks on which card. It +supports stacking, like the kernel one. This complexifies the implementation +a bit, but makes the arbiter more tolerant to user space problems and able +to properly cleanup in all cases when a process dies. +Currently, a max of 16 cards can have locks simultaneously issued from +user space for a given user (file descriptor instance) of the arbiter. + +In the case of devices hot-{un,}plugged, there is a hook - pci_notify() - to +notify them being added/removed in the system and automatically added/removed +in the arbiter. + +There's also a in-kernel API of the arbiter in the case of DRM, vgacon and +others which may use the arbiter. + + +I.2 libpciaccess +---------------- + +To use the vga arbiter char device it was implemented an API inside the +libpciaccess library. One fieldd was added to struct pci_device (each device +on the system): + + /* the type of resource decoded by the device */ + int vgaarb_rsrc; + +Besides it, in pci_system were added: + + int vgaarb_fd; + int vga_count; + struct pci_device *vga_target; + struct pci_device *vga_default_dev; + + +The vga_count is usually need to keep informed how many cards are being +arbitrated, so for instance if there's only one then it can totally escape the +scheme. + + +These functions below acquire VGA resources for the given card and mark those +resources as locked. If the resources requested are "normal" (and not legacy) +resources, the arbiter will first check whether the card is doing legacy +decoding for that type of resource. If yes, the lock is "converted" into a +legacy resource lock. The arbiter will first look for all VGA cards that +might conflict and disable their IOs and/or Memory access, including VGA +forwarding on P2P bridges if necessary, so that the requested resources can +be used. Then, the card is marked as locking these resources and the IO and/or +Memory access is enabled on the card (including VGA forwarding on parent +P2P bridges if any). In the case of vga_arb_lock(), the function will block +if some conflicting card is already locking one of the required resources (or +any resource on a different bus segment, since P2P bridges don't differentiate +VGA memory and IO afaik). If the card already owns the resources, the function +succeeds. vga_arb_trylock() will return (-EBUSY) instead of blocking. Nested +calls are supported (a per-resource counter is maintained). + + +Set the target device of this client. + int pci_device_vgaarb_set_target (struct pci_device *dev); + + +For instance, in x86 if two devices on the same bus want to lock different +resources, both will succeed (lock). If devices are in different buses and +trying to lock different resources, only the first who tried succeeds. + int pci_device_vgaarb_lock (void); + int pci_device_vgaarb_trylock (void); + +Unlock resources of device. + int pci_device_vgaarb_unlock (void); + +Indicates to the arbiter if the card decodes legacy VGA IOs, legacy VGA +Memory, both, or none. All cards default to both, the card driver (fbdev for +example) should tell the arbiter if it has disabled legacy decoding, so the +card can be left out of the arbitration process (and can be safe to take +interrupts at any time. + int pci_device_vgaarb_decodes (int new_vgaarb_rsrc); + +Connects to the arbiter device, allocates the struct + int pci_device_vgaarb_init (void); + +Close the connection + void pci_device_vgaarb_fini (void); + + +I.3 xf86VGAArbiter (X server implementation) +-------------------------------------------- + +(TODO) + +X server basically wraps all the functions that touch VGA registers somehow. + + +II. Credits +=========== + +Benjamin Herrenschmidt (IBM?) started this work when he discussed such design +with the Xorg community in 2005 [1, 2]. In the end of 2007, Paulo Zanoni and +Tiago Vignatti (both of C3SL/Federal University of Paraná) proceeded his work +enhancing the kernel code to adapt as a kernel module and also did the +implementation of the user space side [3]. Now (2009) Tiago Vignatti and Dave +Airlie finally put this work in shape and queued to Jesse Barnes' PCI tree. + + +III. References +============== + +[0] http://cgit.freedesktop.org/xorg/xserver/commit/?id=4b42448a2388d40f257774fbffdccaea87bd0347 +[1] http://lists.freedesktop.org/archives/xorg/2005-March/006663.html +[2] http://lists.freedesktop.org/archives/xorg/2005-March/006745.html +[3] http://lists.freedesktop.org/archives/xorg/2007-October/029507.html -- cgit v1.2.3-70-g09d2 From 9c1b96e34717d001873b603d85434aa78e730282 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 9 Jun 2009 12:37:58 +0300 Subject: KVM: Document basic API Document the basic API corresponding to the 2.6.22 release. Signed-off-by: Avi Kivity --- Documentation/kvm/api.txt | 683 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 683 insertions(+) create mode 100644 Documentation/kvm/api.txt (limited to 'Documentation') diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt new file mode 100644 index 00000000000..1b1c22da211 --- /dev/null +++ b/Documentation/kvm/api.txt @@ -0,0 +1,683 @@ +The Definitive KVM (Kernel-based Virtual Machine) API Documentation +=================================================================== + +1. General description + +The kvm API is a set of ioctls that are issued to control various aspects +of a virtual machine. The ioctls belong to three classes + + - System ioctls: These query and set global attributes which affect the + whole kvm subsystem. In addition a system ioctl is used to create + virtual machines + + - VM ioctls: These query and set attributes that affect an entire virtual + machine, for example memory layout. In addition a VM ioctl is used to + create virtual cpus (vcpus). + + Only run VM ioctls from the same process (address space) that was used + to create the VM. + + - vcpu ioctls: These query and set attributes that control the operation + of a single virtual cpu. + + Only run vcpu ioctls from the same thread that was used to create the + vcpu. + +2. File descritpors + +The kvm API is centered around file descriptors. An initial +open("/dev/kvm") obtains a handle to the kvm subsystem; this handle +can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this +handle will create a VM file descripror which can be used to issue VM +ioctls. A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu +and return a file descriptor pointing to it. Finally, ioctls on a vcpu +fd can be used to control the vcpu, including the important task of +actually running guest code. + +In general file descriptors can be migrated among processes by means +of fork() and the SCM_RIGHTS facility of unix domain socket. These +kinds of tricks are explicitly not supported by kvm. While they will +not cause harm to the host, their actual behavior is not guaranteed by +the API. The only supported use is one virtual machine per process, +and one vcpu per thread. + +3. Extensions + +As of Linux 2.6.22, the KVM ABI has been stabilized: no backward +incompatible change are allowed. However, there is an extension +facility that allows backward-compatible extensions to the API to be +queried and used. + +The extension mechanism is not based on on the Linux version number. +Instead, kvm defines extension identifiers and a facility to query +whether a particular extension identifier is available. If it is, a +set of ioctls is available for application use. + +4. API description + +This section describes ioctls that can be used to control kvm guests. +For each ioctl, the following information is provided along with a +description: + + Capability: which KVM extension provides this ioctl. Can be 'basic', + which means that is will be provided by any kernel that supports + API version 12 (see section 4.1), or a KVM_CAP_xyz constant, which + means availability needs to be checked with KVM_CHECK_EXTENSION + (see section 4.4). + + Architectures: which instruction set architectures provide this ioctl. + x86 includes both i386 and x86_64. + + Type: system, vm, or vcpu. + + Parameters: what parameters are accepted by the ioctl. + + Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL) + are not detailed, but errors with specific meanings are. + +4.1 KVM_GET_API_VERSION + +Capability: basic +Architectures: all +Type: system ioctl +Parameters: none +Returns: the constant KVM_API_VERSION (=12) + +This identifies the API version as the stable kvm API. It is not +expected that this number will change. However, Linux 2.6.20 and +2.6.21 report earlier versions; these are not documented and not +supported. Applications should refuse to run if KVM_GET_API_VERSION +returns a value other than 12. If this check passes, all ioctls +described as 'basic' will be available. + +4.2 KVM_CREATE_VM + +Capability: basic +Architectures: all +Type: system ioctl +Parameters: none +Returns: a VM fd that can be used to control the new virtual machine. + +The new VM has no virtual cpus and no memory. An mmap() of a VM fd +will access the virtual machine's physical address space; offset zero +corresponds to guest physical address zero. Use of mmap() on a VM fd +is discouraged if userspace memory allocation (KVM_CAP_USER_MEMORY) is +available. + +4.3 KVM_GET_MSR_INDEX_LIST + +Capability: basic +Architectures: x86 +Type: system +Parameters: struct kvm_msr_list (in/out) +Returns: 0 on success; -1 on error +Errors: + E2BIG: the msr index list is to be to fit in the array specified by + the user. + +struct kvm_msr_list { + __u32 nmsrs; /* number of msrs in entries */ + __u32 indices[0]; +}; + +This ioctl returns the guest msrs that are supported. The list varies +by kvm version and host processor, but does not change otherwise. The +user fills in the size of the indices array in nmsrs, and in return +kvm adjusts nmsrs to reflect the actual number of msrs and fills in +the indices array with their numbers. + +4.4 KVM_CHECK_EXTENSION + +Capability: basic +Architectures: all +Type: system ioctl +Parameters: extension identifier (KVM_CAP_*) +Returns: 0 if unsupported; 1 (or some other positive integer) if supported + +The API allows the application to query about extensions to the core +kvm API. Userspace passes an extension identifier (an integer) and +receives an integer that describes the extension availability. +Generally 0 means no and 1 means yes, but some extensions may report +additional information in the integer return value. + +4.5 KVM_GET_VCPU_MMAP_SIZE + +Capability: basic +Architectures: all +Type: system ioctl +Parameters: none +Returns: size of vcpu mmap area, in bytes + +The KVM_RUN ioctl (cf.) communicates with userspace via a shared +memory region. This ioctl returns the size of that region. See the +KVM_RUN documentation for details. + +4.6 KVM_SET_MEMORY_REGION + +Capability: basic +Architectures: all +Type: vm ioctl +Parameters: struct kvm_memory_region (in) +Returns: 0 on success, -1 on error + +struct kvm_memory_region { + __u32 slot; + __u32 flags; + __u64 guest_phys_addr; + __u64 memory_size; /* bytes */ +}; + +/* for kvm_memory_region::flags */ +#define KVM_MEM_LOG_DIRTY_PAGES 1UL + +This ioctl allows the user to create or modify a guest physical memory +slot. When changing an existing slot, it may be moved in the guest +physical memory space, or its flags may be modified. It may not be +resized. Slots may not overlap. + +The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which +instructs kvm to keep track of writes to memory within the slot. See +the KVM_GET_DIRTY_LOG ioctl. + +It is recommended to use the KVM_SET_USER_MEMORY_REGION ioctl instead +of this API, if available. This newer API allows placing guest memory +at specified locations in the host address space, yielding better +control and easy access. + +4.6 KVM_CREATE_VCPU + +Capability: basic +Architectures: all +Type: vm ioctl +Parameters: vcpu id (apic id on x86) +Returns: vcpu fd on success, -1 on error + +This API adds a vcpu to a virtual machine. The vcpu id is a small integer +in the range [0, max_vcpus). + +4.7 KVM_GET_DIRTY_LOG (vm ioctl) + +Capability: basic +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_dirty_log (in/out) +Returns: 0 on success, -1 on error + +/* for KVM_GET_DIRTY_LOG */ +struct kvm_dirty_log { + __u32 slot; + __u32 padding; + union { + void __user *dirty_bitmap; /* one bit per page */ + __u64 padding; + }; +}; + +Given a memory slot, return a bitmap containing any pages dirtied +since the last call to this ioctl. Bit 0 is the first page in the +memory slot. Ensure the entire structure is cleared to avoid padding +issues. + +4.8 KVM_SET_MEMORY_ALIAS + +Capability: basic +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_memory_alias (in) +Returns: 0 (success), -1 (error) + +struct kvm_memory_alias { + __u32 slot; /* this has a different namespace than memory slots */ + __u32 flags; + __u64 guest_phys_addr; + __u64 memory_size; + __u64 target_phys_addr; +}; + +Defines a guest physical address space region as an alias to another +region. Useful for aliased address, for example the VGA low memory +window. Should not be used with userspace memory. + +4.9 KVM_RUN + +Capability: basic +Architectures: all +Type: vcpu ioctl +Parameters: none +Returns: 0 on success, -1 on error +Errors: + EINTR: an unmasked signal is pending + +This ioctl is used to run a guest virtual cpu. While there are no +explicit parameters, there is an implicit parameter block that can be +obtained by mmap()ing the vcpu fd at offset 0, with the size given by +KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct +kvm_run' (see below). + +4.10 KVM_GET_REGS + +Capability: basic +Architectures: all +Type: vcpu ioctl +Parameters: struct kvm_regs (out) +Returns: 0 on success, -1 on error + +Reads the general purpose registers from the vcpu. + +/* x86 */ +struct kvm_regs { + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + __u64 rax, rbx, rcx, rdx; + __u64 rsi, rdi, rsp, rbp; + __u64 r8, r9, r10, r11; + __u64 r12, r13, r14, r15; + __u64 rip, rflags; +}; + +4.11 KVM_SET_REGS + +Capability: basic +Architectures: all +Type: vcpu ioctl +Parameters: struct kvm_regs (in) +Returns: 0 on success, -1 on error + +Writes the general purpose registers into the vcpu. + +See KVM_GET_REGS for the data structure. + +4.12 KVM_GET_SREGS + +Capability: basic +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_sregs (out) +Returns: 0 on success, -1 on error + +Reads special registers from the vcpu. + +/* x86 */ +struct kvm_sregs { + struct kvm_segment cs, ds, es, fs, gs, ss; + struct kvm_segment tr, ldt; + struct kvm_dtable gdt, idt; + __u64 cr0, cr2, cr3, cr4, cr8; + __u64 efer; + __u64 apic_base; + __u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64]; +}; + +interrupt_bitmap is a bitmap of pending external interrupts. At most +one bit may be set. This interrupt has been acknowledged by the APIC +but not yet injected into the cpu core. + +4.13 KVM_SET_SREGS + +Capability: basic +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_sregs (in) +Returns: 0 on success, -1 on error + +Writes special registers into the vcpu. See KVM_GET_SREGS for the +data structures. + +4.14 KVM_TRANSLATE + +Capability: basic +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_translation (in/out) +Returns: 0 on success, -1 on error + +Translates a virtual address according to the vcpu's current address +translation mode. + +struct kvm_translation { + /* in */ + __u64 linear_address; + + /* out */ + __u64 physical_address; + __u8 valid; + __u8 writeable; + __u8 usermode; + __u8 pad[5]; +}; + +4.15 KVM_INTERRUPT + +Capability: basic +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_interrupt (in) +Returns: 0 on success, -1 on error + +Queues a hardware interrupt vector to be injected. This is only +useful if in-kernel local APIC is not used. + +/* for KVM_INTERRUPT */ +struct kvm_interrupt { + /* in */ + __u32 irq; +}; + +Note 'irq' is an interrupt vector, not an interrupt pin or line. + +4.16 KVM_DEBUG_GUEST + +Capability: basic +Architectures: none +Type: vcpu ioctl +Parameters: none) +Returns: -1 on error + +Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead. + +4.17 KVM_GET_MSRS + +Capability: basic +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_msrs (in/out) +Returns: 0 on success, -1 on error + +Reads model-specific registers from the vcpu. Supported msr indices can +be obtained using KVM_GET_MSR_INDEX_LIST. + +struct kvm_msrs { + __u32 nmsrs; /* number of msrs in entries */ + __u32 pad; + + struct kvm_msr_entry entries[0]; +}; + +struct kvm_msr_entry { + __u32 index; + __u32 reserved; + __u64 data; +}; + +Application code should set the 'nmsrs' member (which indicates the +size of the entries array) and the 'index' member of each array entry. +kvm will fill in the 'data' member. + +4.18 KVM_SET_MSRS + +Capability: basic +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_msrs (in) +Returns: 0 on success, -1 on error + +Writes model-specific registers to the vcpu. See KVM_GET_MSRS for the +data structures. + +Application code should set the 'nmsrs' member (which indicates the +size of the entries array), and the 'index' and 'data' members of each +array entry. + +4.19 KVM_SET_CPUID + +Capability: basic +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_cpuid (in) +Returns: 0 on success, -1 on error + +Defines the vcpu responses to the cpuid instruction. Applications +should use the KVM_SET_CPUID2 ioctl if available. + + +struct kvm_cpuid_entry { + __u32 function; + __u32 eax; + __u32 ebx; + __u32 ecx; + __u32 edx; + __u32 padding; +}; + +/* for KVM_SET_CPUID */ +struct kvm_cpuid { + __u32 nent; + __u32 padding; + struct kvm_cpuid_entry entries[0]; +}; + +4.20 KVM_SET_SIGNAL_MASK + +Capability: basic +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_signal_mask (in) +Returns: 0 on success, -1 on error + +Defines which signals are blocked during execution of KVM_RUN. This +signal mask temporarily overrides the threads signal mask. Any +unblocked signal received (except SIGKILL and SIGSTOP, which retain +their traditional behaviour) will cause KVM_RUN to return with -EINTR. + +Note the signal will only be delivered if not blocked by the original +signal mask. + +/* for KVM_SET_SIGNAL_MASK */ +struct kvm_signal_mask { + __u32 len; + __u8 sigset[0]; +}; + +4.21 KVM_GET_FPU + +Capability: basic +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_fpu (out) +Returns: 0 on success, -1 on error + +Reads the floating point state from the vcpu. + +/* for KVM_GET_FPU and KVM_SET_FPU */ +struct kvm_fpu { + __u8 fpr[8][16]; + __u16 fcw; + __u16 fsw; + __u8 ftwx; /* in fxsave format */ + __u8 pad1; + __u16 last_opcode; + __u64 last_ip; + __u64 last_dp; + __u8 xmm[16][16]; + __u32 mxcsr; + __u32 pad2; +}; + +4.22 KVM_SET_FPU + +Capability: basic +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_fpu (in) +Returns: 0 on success, -1 on error + +Writes the floating point state to the vcpu. + +/* for KVM_GET_FPU and KVM_SET_FPU */ +struct kvm_fpu { + __u8 fpr[8][16]; + __u16 fcw; + __u16 fsw; + __u8 ftwx; /* in fxsave format */ + __u8 pad1; + __u16 last_opcode; + __u64 last_ip; + __u64 last_dp; + __u8 xmm[16][16]; + __u32 mxcsr; + __u32 pad2; +}; + +5. The kvm_run structure + +Application code obtains a pointer to the kvm_run structure by +mmap()ing a vcpu fd. From that point, application code can control +execution by changing fields in kvm_run prior to calling the KVM_RUN +ioctl, and obtain information about the reason KVM_RUN returned by +looking up structure members. + +struct kvm_run { + /* in */ + __u8 request_interrupt_window; + +Request that KVM_RUN return when it becomes possible to inject external +interrupts into the guest. Useful in conjunction with KVM_INTERRUPT. + + __u8 padding1[7]; + + /* out */ + __u32 exit_reason; + +When KVM_RUN has returned successfully (return value 0), this informs +application code why KVM_RUN has returned. Allowable values for this +field are detailed below. + + __u8 ready_for_interrupt_injection; + +If request_interrupt_window has been specified, this field indicates +an interrupt can be injected now with KVM_INTERRUPT. + + __u8 if_flag; + +The value of the current interrupt flag. Only valid if in-kernel +local APIC is not used. + + __u8 padding2[2]; + + /* in (pre_kvm_run), out (post_kvm_run) */ + __u64 cr8; + +The value of the cr8 register. Only valid if in-kernel local APIC is +not used. Both input and output. + + __u64 apic_base; + +The value of the APIC BASE msr. Only valid if in-kernel local +APIC is not used. Both input and output. + + union { + /* KVM_EXIT_UNKNOWN */ + struct { + __u64 hardware_exit_reason; + } hw; + +If exit_reason is KVM_EXIT_UNKNOWN, the vcpu has exited due to unknown +reasons. Further architecture-specific information is available in +hardware_exit_reason. + + /* KVM_EXIT_FAIL_ENTRY */ + struct { + __u64 hardware_entry_failure_reason; + } fail_entry; + +If exit_reason is KVM_EXIT_FAIL_ENTRY, the vcpu could not be run due +to unknown reasons. Further architecture-specific information is +available in hardware_entry_failure_reason. + + /* KVM_EXIT_EXCEPTION */ + struct { + __u32 exception; + __u32 error_code; + } ex; + +Unused. + + /* KVM_EXIT_IO */ + struct { +#define KVM_EXIT_IO_IN 0 +#define KVM_EXIT_IO_OUT 1 + __u8 direction; + __u8 size; /* bytes */ + __u16 port; + __u32 count; + __u64 data_offset; /* relative to kvm_run start */ + } io; + +If exit_reason is KVM_EXIT_IO_IN or KVM_EXIT_IO_OUT, then the vcpu has +executed a port I/O instruction which could not be satisfied by kvm. +data_offset describes where the data is located (KVM_EXIT_IO_OUT) or +where kvm expects application code to place the data for the next +KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a patcked array. + + struct { + struct kvm_debug_exit_arch arch; + } debug; + +Unused. + + /* KVM_EXIT_MMIO */ + struct { + __u64 phys_addr; + __u8 data[8]; + __u32 len; + __u8 is_write; + } mmio; + +If exit_reason is KVM_EXIT_MMIO or KVM_EXIT_IO_OUT, then the vcpu has +executed a memory-mapped I/O instruction which could not be satisfied +by kvm. The 'data' member contains the written data if 'is_write' is +true, and should be filled by application code otherwise. + + /* KVM_EXIT_HYPERCALL */ + struct { + __u64 nr; + __u64 args[6]; + __u64 ret; + __u32 longmode; + __u32 pad; + } hypercall; + +Unused. + + /* KVM_EXIT_TPR_ACCESS */ + struct { + __u64 rip; + __u32 is_write; + __u32 pad; + } tpr_access; + +To be documented (KVM_TPR_ACCESS_REPORTING). + + /* KVM_EXIT_S390_SIEIC */ + struct { + __u8 icptcode; + __u64 mask; /* psw upper half */ + __u64 addr; /* psw lower half */ + __u16 ipa; + __u32 ipb; + } s390_sieic; + +s390 specific. + + /* KVM_EXIT_S390_RESET */ +#define KVM_S390_RESET_POR 1 +#define KVM_S390_RESET_CLEAR 2 +#define KVM_S390_RESET_SUBSYSTEM 4 +#define KVM_S390_RESET_CPU_INIT 8 +#define KVM_S390_RESET_IPL 16 + __u64 s390_reset_flags; + +s390 specific. + + /* KVM_EXIT_DCR */ + struct { + __u32 dcrn; + __u32 data; + __u8 is_write; + } dcr; + +powerpc specific. + + /* Fix the size of the union. */ + char padding[256]; + }; +}; -- cgit v1.2.3-70-g09d2 From fef07aae9cd9ed82f94228c311b35360f1f38902 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Fri, 10 Jul 2009 14:20:35 +0200 Subject: KVM: add module parameters documentation Signed-off-by: Andre Przywara Signed-off-by: Avi Kivity --- Documentation/kernel-parameters.txt | 39 +++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 7936b801fe6..877a02a12e0 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -57,6 +57,7 @@ parameter is applicable: ISAPNP ISA PnP code is enabled. ISDN Appropriate ISDN support is enabled. JOY Appropriate joystick support is enabled. + KVM Kernel Virtual Machine support is enabled. LIBATA Libata driver is enabled LP Printer support is enabled. LOOP Loopback device support is enabled. @@ -1098,6 +1099,44 @@ and is between 256 and 4096 characters. It is defined in the file kstack=N [X86] Print N words from the kernel stack in oops dumps. + kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs. + Default is 0 (don't ignore, but inject #GP) + + kvm.oos_shadow= [KVM] Disable out-of-sync shadow paging. + Default is 1 (enabled) + + kvm-amd.nested= [KVM,AMD] Allow nested virtualization in KVM/SVM. + Default is 0 (off) + + kvm-amd.npt= [KVM,AMD] Disable nested paging (virtualized MMU) + for all guests. + Default is 1 (enabled) if in 64bit or 32bit-PAE mode + + kvm-intel.bypass_guest_pf= + [KVM,Intel] Disables bypassing of guest page faults + on Intel chips. Default is 1 (enabled) + + kvm-intel.ept= [KVM,Intel] Disable extended page tables + (virtualized MMU) support on capable Intel chips. + Default is 1 (enabled) + + kvm-intel.emulate_invalid_guest_state= + [KVM,Intel] Enable emulation of invalid guest states + Default is 0 (disabled) + + kvm-intel.flexpriority= + [KVM,Intel] Disable FlexPriority feature (TPR shadow). + Default is 1 (enabled) + + kvm-intel.unrestricted_guest= + [KVM,Intel] Disable unrestricted guest feature + (virtualized real and unpaged mode) on capable + Intel chips. Default is 1 (enabled) + + kvm-intel.vpid= [KVM,Intel] Disable Virtual Processor Identification + feature (tagged TLBs) on capable Intel chips. + Default is 1 (enabled) + l2cr= [PPC] l3cr= [PPC] -- cgit v1.2.3-70-g09d2 From 0aaeb3b1087b21fef434f1bae6e6495c12ee2f55 Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Thu, 13 Aug 2009 20:05:48 +0530 Subject: Documentation: Update KVM list email address The KVM list moved to vger.kernel.org last year Signed-off-by: Amit Shah Signed-off-by: Avi Kivity --- Documentation/ioctl/ioctl-number.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index dbea4f95fc8..999a2017df7 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -192,7 +192,7 @@ Code Seq# Include File Comments 0xAD 00 Netfilter device in development: 0xAE all linux/kvm.h Kernel-based Virtual Machine - + 0xB0 all RATIO devices in development: 0xB1 00-1F PPPoX -- cgit v1.2.3-70-g09d2 From 5dadbfd64724c41716d4fc82df6f01b023d5b15d Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 23 Aug 2009 17:08:04 +0300 Subject: KVM: Document KVM_CAP_IRQCHIP Signed-off-by: Avi Kivity --- Documentation/kvm/api.txt | 76 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt index 1b1c22da211..5a4bc8cf6d0 100644 --- a/Documentation/kvm/api.txt +++ b/Documentation/kvm/api.txt @@ -517,6 +517,82 @@ struct kvm_fpu { __u32 pad2; }; +4.23 KVM_CREATE_IRQCHIP + +Capability: KVM_CAP_IRQCHIP +Architectures: x86, ia64 +Type: vm ioctl +Parameters: none +Returns: 0 on success, -1 on error + +Creates an interrupt controller model in the kernel. On x86, creates a virtual +ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a +local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23 +only go to the IOAPIC. On ia64, a IOSAPIC is created. + +4.24 KVM_IRQ_LINE + +Capability: KVM_CAP_IRQCHIP +Architectures: x86, ia64 +Type: vm ioctl +Parameters: struct kvm_irq_level +Returns: 0 on success, -1 on error + +Sets the level of a GSI input to the interrupt controller model in the kernel. +Requires that an interrupt controller model has been previously created with +KVM_CREATE_IRQCHIP. Note that edge-triggered interrupts require the level +to be set to 1 and then back to 0. + +struct kvm_irq_level { + union { + __u32 irq; /* GSI */ + __s32 status; /* not used for KVM_IRQ_LEVEL */ + }; + __u32 level; /* 0 or 1 */ +}; + +4.25 KVM_GET_IRQCHIP + +Capability: KVM_CAP_IRQCHIP +Architectures: x86, ia64 +Type: vm ioctl +Parameters: struct kvm_irqchip (in/out) +Returns: 0 on success, -1 on error + +Reads the state of a kernel interrupt controller created with +KVM_CREATE_IRQCHIP into a buffer provided by the caller. + +struct kvm_irqchip { + __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */ + __u32 pad; + union { + char dummy[512]; /* reserving space */ + struct kvm_pic_state pic; + struct kvm_ioapic_state ioapic; + } chip; +}; + +4.26 KVM_SET_IRQCHIP + +Capability: KVM_CAP_IRQCHIP +Architectures: x86, ia64 +Type: vm ioctl +Parameters: struct kvm_irqchip (in) +Returns: 0 on success, -1 on error + +Sets the state of a kernel interrupt controller created with +KVM_CREATE_IRQCHIP from a buffer provided by the caller. + +struct kvm_irqchip { + __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */ + __u32 pad; + union { + char dummy[512]; /* reserving space */ + struct kvm_pic_state pic; + struct kvm_ioapic_state ioapic; + } chip; +}; + 5. The kvm_run structure Application code obtains a pointer to the kvm_run structure by -- cgit v1.2.3-70-g09d2 From e8188807b7cd14e0a001946005f0c58f9dd9dfe6 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Tue, 26 May 2009 15:18:52 +0200 Subject: Doc: seq_file.txt fix wrong dd command example. Small error in the "dd" command example, "out=" should be "of=". Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Jonathan Corbet --- Documentation/filesystems/seq_file.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt index b843743aa0b..0d15ebccf5b 100644 --- a/Documentation/filesystems/seq_file.txt +++ b/Documentation/filesystems/seq_file.txt @@ -46,7 +46,7 @@ better to do. The file is seekable, in that one can do something like the following: dd if=/proc/sequence of=out1 count=1 - dd if=/proc/sequence skip=1 out=out2 count=1 + dd if=/proc/sequence skip=1 of=out2 count=1 Then concatenate the output files out1 and out2 and get the right result. Yes, it is a thoroughly useless module, but the point is to show -- cgit v1.2.3-70-g09d2 From 6c19efb46aacf2c5043ad210b888ee58ffb848c0 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Tue, 8 Sep 2009 17:49:37 -0600 Subject: Document the flex_array library. A brief document on how to use flexible arrays, derived from an article first published on LWN. Signed-off-by: Jonathan Corbet --- Documentation/flexible-arrays.txt | 99 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 Documentation/flexible-arrays.txt (limited to 'Documentation') diff --git a/Documentation/flexible-arrays.txt b/Documentation/flexible-arrays.txt new file mode 100644 index 00000000000..84eb26808de --- /dev/null +++ b/Documentation/flexible-arrays.txt @@ -0,0 +1,99 @@ +Using flexible arrays in the kernel +Last updated for 2.6.31 +Jonathan Corbet + +Large contiguous memory allocations can be unreliable in the Linux kernel. +Kernel programmers will sometimes respond to this problem by allocating +pages with vmalloc(). This solution not ideal, though. On 32-bit systems, +memory from vmalloc() must be mapped into a relatively small address space; +it's easy to run out. On SMP systems, the page table changes required by +vmalloc() allocations can require expensive cross-processor interrupts on +all CPUs. And, on all systems, use of space in the vmalloc() range +increases pressure on the translation lookaside buffer (TLB), reducing the +performance of the system. + +In many cases, the need for memory from vmalloc() can be eliminated by +piecing together an array from smaller parts; the flexible array library +exists to make this task easier. + +A flexible array holds an arbitrary (within limits) number of fixed-sized +objects, accessed via an integer index. Sparse arrays are handled +reasonably well. Only single-page allocations are made, so memory +allocation failures should be relatively rare. The down sides are that the +arrays cannot be indexed directly, individual object size cannot exceed the +system page size, and putting data into a flexible array requires a copy +operation. It's also worth noting that flexible arrays do no internal +locking at all; if concurrent access to an array is possible, then the +caller must arrange for appropriate mutual exclusion. + +The creation of a flexible array is done with: + + #include + + struct flex_array *flex_array_alloc(int element_size, + unsigned int total, + gfp_t flags); + +The individual object size is provided by element_size, while total is the +maximum number of objects which can be stored in the array. The flags +argument is passed directly to the internal memory allocation calls. With +the current code, using flags to ask for high memory is likely to lead to +notably unpleasant side effects. + +Storing data into a flexible array is accomplished with a call to: + + int flex_array_put(struct flex_array *array, unsigned int element_nr, + void *src, gfp_t flags); + +This call will copy the data from src into the array, in the position +indicated by element_nr (which must be less than the maximum specified when +the array was created). If any memory allocations must be performed, flags +will be used. The return value is zero on success, a negative error code +otherwise. + +There might possibly be a need to store data into a flexible array while +running in some sort of atomic context; in this situation, sleeping in the +memory allocator would be a bad thing. That can be avoided by using +GFP_ATOMIC for the flags value, but, often, there is a better way. The +trick is to ensure that any needed memory allocations are done before +entering atomic context, using: + + int flex_array_prealloc(struct flex_array *array, unsigned int start, + unsigned int end, gfp_t flags); + +This function will ensure that memory for the elements indexed in the range +defined by start and end has been allocated. Thereafter, a +flex_array_put() call on an element in that range is guaranteed not to +block. + +Getting data back out of the array is done with: + + void *flex_array_get(struct flex_array *fa, unsigned int element_nr); + +The return value is a pointer to the data element, or NULL if that +particular element has never been allocated. + +Note that it is possible to get back a valid pointer for an element which +has never been stored in the array. Memory for array elements is allocated +one page at a time; a single allocation could provide memory for several +adjacent elements. The flexible array code does not know if a specific +element has been written; it only knows if the associated memory is +present. So a flex_array_get() call on an element which was never stored +in the array has the potential to return a pointer to random data. If the +caller does not have a separate way to know which elements were actually +stored, it might be wise, at least, to add GFP_ZERO to the flags argument +to ensure that all elements are zeroed. + +There is no way to remove a single element from the array. It is possible, +though, to remove all elements with a call to: + + void flex_array_free_parts(struct flex_array *array); + +This call frees all elements, but leaves the array itself in place. +Freeing the entire array is done with: + + void flex_array_free(struct flex_array *array); + +As of this writing, there are no users of flexible arrays in the mainline +kernel. The functions described here are also not exported to modules; +that will probably be fixed when somebody comes up with a need for it. -- cgit v1.2.3-70-g09d2 From c114728af2acdca0bd8b1d2f5792e393c775f5fc Mon Sep 17 00:00:00 2001 From: Hans-Joachim Picht Date: Fri, 11 Sep 2009 10:28:47 +0200 Subject: [S390] add call home support Signed-off-by: Hans-Joachim Picht Signed-off-by: Martin Schwidefsky --- Documentation/sysctl/kernel.txt | 16 +++ drivers/s390/char/Kconfig | 10 ++ drivers/s390/char/Makefile | 1 + drivers/s390/char/sclp.h | 4 +- drivers/s390/char/sclp_async.c | 224 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 254 insertions(+), 1 deletion(-) create mode 100644 drivers/s390/char/sclp_async.c (limited to 'Documentation') diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 322a00bb99d..2dbff53369d 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -19,6 +19,7 @@ Currently, these files might (depending on your configuration) show up in /proc/sys/kernel: - acpi_video_flags - acct +- callhome [ S390 only ] - auto_msgmni - core_pattern - core_uses_pid @@ -91,6 +92,21 @@ valid for 30 seconds. ============================================================== +callhome: + +Controls the kernel's callhome behavior in case of a kernel panic. + +The s390 hardware allows an operating system to send a notification +to a service organization (callhome) in case of an operating system panic. + +When the value in this file is 0 (which is the default behavior) +nothing happens in case of a kernel panic. If this value is set to "1" +the complete kernel oops message is send to the IBM customer service +organization in case the mainframe the Linux operating system is running +on has a service contract with IBM. + +============================================================== + core_pattern: core_pattern is used to specify a core dumpfile pattern name. diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig index 0769ced52db..4e34d3686c2 100644 --- a/drivers/s390/char/Kconfig +++ b/drivers/s390/char/Kconfig @@ -82,6 +82,16 @@ config SCLP_CPI You should only select this option if you know what you are doing, need this feature and intend to run your kernel in LPAR. +config SCLP_ASYNC + tristate "Support for Call Home via Asynchronous SCLP Records" + depends on S390 + help + This option enables the call home function, which is able to inform + the service element and connected organisations about a kernel panic. + You should only select this option if you know what you are doing, + want for inform other people about your kernel panics, + need this feature and intend to run your kernel in LPAR. + config S390_TAPE tristate "S/390 tape device support" depends on CCW diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile index 7e73e39a174..efb500ab66c 100644 --- a/drivers/s390/char/Makefile +++ b/drivers/s390/char/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_SCLP_TTY) += sclp_tty.o obj-$(CONFIG_SCLP_CONSOLE) += sclp_con.o obj-$(CONFIG_SCLP_VT220_TTY) += sclp_vt220.o obj-$(CONFIG_SCLP_CPI) += sclp_cpi.o +obj-$(CONFIG_SCLP_ASYNC) += sclp_async.o obj-$(CONFIG_ZVM_WATCHDOG) += vmwatchdog.o obj-$(CONFIG_VMLOGRDR) += vmlogrdr.o diff --git a/drivers/s390/char/sclp.h b/drivers/s390/char/sclp.h index 60e7cb07095..6bb5a6bdfab 100644 --- a/drivers/s390/char/sclp.h +++ b/drivers/s390/char/sclp.h @@ -27,6 +27,7 @@ #define EVTYP_VT220MSG 0x1A #define EVTYP_CONFMGMDATA 0x04 #define EVTYP_SDIAS 0x1C +#define EVTYP_ASYNC 0x0A #define EVTYP_OPCMD_MASK 0x80000000 #define EVTYP_MSG_MASK 0x40000000 @@ -38,6 +39,7 @@ #define EVTYP_VT220MSG_MASK 0x00000040 #define EVTYP_CONFMGMDATA_MASK 0x10000000 #define EVTYP_SDIAS_MASK 0x00000010 +#define EVTYP_ASYNC_MASK 0x00400000 #define GNRLMSGFLGS_DOM 0x8000 #define GNRLMSGFLGS_SNDALRM 0x4000 @@ -85,12 +87,12 @@ struct sccb_header { } __attribute__((packed)); extern u64 sclp_facilities; - #define SCLP_HAS_CHP_INFO (sclp_facilities & 0x8000000000000000ULL) #define SCLP_HAS_CHP_RECONFIG (sclp_facilities & 0x2000000000000000ULL) #define SCLP_HAS_CPU_INFO (sclp_facilities & 0x0800000000000000ULL) #define SCLP_HAS_CPU_RECONFIG (sclp_facilities & 0x0400000000000000ULL) + struct gds_subvector { u8 length; u8 key; diff --git a/drivers/s390/char/sclp_async.c b/drivers/s390/char/sclp_async.c new file mode 100644 index 00000000000..daaec185ed3 --- /dev/null +++ b/drivers/s390/char/sclp_async.c @@ -0,0 +1,224 @@ +/* + * Enable Asynchronous Notification via SCLP. + * + * Copyright IBM Corp. 2009 + * Author(s): Hans-Joachim Picht + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sclp.h" + +static int callhome_enabled; +static struct sclp_req *request; +static struct sclp_async_sccb *sccb; +static int sclp_async_send_wait(char *message); +static struct ctl_table_header *callhome_sysctl_header; +static DEFINE_SPINLOCK(sclp_async_lock); +static char nodename[64]; +#define SCLP_NORMAL_WRITE 0x00 + +struct async_evbuf { + struct evbuf_header header; + u64 reserved; + u8 rflags; + u8 empty; + u8 rtype; + u8 otype; + char comp_id[12]; + char data[3000]; /* there is still some space left */ +} __attribute__((packed)); + +struct sclp_async_sccb { + struct sccb_header header; + struct async_evbuf evbuf; +} __attribute__((packed)); + +static struct sclp_register sclp_async_register = { + .send_mask = EVTYP_ASYNC_MASK, +}; + +static int call_home_on_panic(struct notifier_block *self, + unsigned long event, void *data) +{ + strncat(data, nodename, strlen(nodename)); + sclp_async_send_wait(data); + return NOTIFY_DONE; +} + +static struct notifier_block call_home_panic_nb = { + .notifier_call = call_home_on_panic, + .priority = INT_MAX, +}; + +static int proc_handler_callhome(ctl_table *ctl, int write, struct file *filp, + void __user *buffer, size_t *count, + loff_t *ppos) +{ + unsigned long val; + int len, rc; + char buf[2]; + + if (!*count | (*ppos && !write)) { + *count = 0; + return 0; + } + if (!write) { + len = sprintf(buf, "%d\n", callhome_enabled); + buf[len] = '\0'; + rc = copy_to_user(buffer, buf, sizeof(buf)); + if (rc != 0) + return -EFAULT; + } else { + len = *count; + rc = copy_from_user(buf, buffer, sizeof(buf)); + if (rc != 0) + return -EFAULT; + if (strict_strtoul(buf, 0, &val) != 0) + return -EINVAL; + if (val != 0 && val != 1) + return -EINVAL; + callhome_enabled = val; + } + *count = len; + *ppos += len; + return 0; +} + +static struct ctl_table callhome_table[] = { + { + .procname = "callhome", + .mode = 0644, + .proc_handler = &proc_handler_callhome, + }, + { .ctl_name = 0 } +}; + +static struct ctl_table kern_dir_table[] = { + { + .ctl_name = CTL_KERN, + .procname = "kernel", + .maxlen = 0, + .mode = 0555, + .child = callhome_table, + }, + { .ctl_name = 0 } +}; + +/* + * Function used to transfer asynchronous notification + * records which waits for send completion + */ +static int sclp_async_send_wait(char *message) +{ + struct async_evbuf *evb; + int rc; + unsigned long flags; + + if (!callhome_enabled) + return 0; + sccb->evbuf.header.type = EVTYP_ASYNC; + sccb->evbuf.rtype = 0xA5; + sccb->evbuf.otype = 0x00; + evb = &sccb->evbuf; + request->command = SCLP_CMDW_WRITE_EVENT_DATA; + request->sccb = sccb; + request->status = SCLP_REQ_FILLED; + strncpy(sccb->evbuf.data, message, sizeof(sccb->evbuf.data)); + /* + * Retain Queue + * e.g. 5639CC140 500 Red Hat RHEL5 Linux for zSeries (RHEL AS) + */ + strncpy(sccb->evbuf.comp_id, "000000000", sizeof(sccb->evbuf.comp_id)); + sccb->evbuf.header.length = sizeof(sccb->evbuf); + sccb->header.length = sizeof(sccb->evbuf) + sizeof(sccb->header); + sccb->header.function_code = SCLP_NORMAL_WRITE; + rc = sclp_add_request(request); + if (rc) + return rc; + spin_lock_irqsave(&sclp_async_lock, flags); + while (request->status != SCLP_REQ_DONE && + request->status != SCLP_REQ_FAILED) { + sclp_sync_wait(); + } + spin_unlock_irqrestore(&sclp_async_lock, flags); + if (request->status != SCLP_REQ_DONE) + return -EIO; + rc = ((struct sclp_async_sccb *) + request->sccb)->header.response_code; + if (rc != 0x0020) + return -EIO; + if (evb->header.flags != 0x80) + return -EIO; + return rc; +} + +static int __init sclp_async_init(void) +{ + int rc; + + rc = sclp_register(&sclp_async_register); + if (rc) + return rc; + callhome_sysctl_header = register_sysctl_table(kern_dir_table); + if (!callhome_sysctl_header) { + rc = -ENOMEM; + goto out_sclp; + } + if (!(sclp_async_register.sclp_receive_mask & EVTYP_ASYNC_MASK)) { + rc = -EOPNOTSUPP; + goto out_sclp; + } + rc = -ENOMEM; + request = kzalloc(sizeof(struct sclp_req), GFP_KERNEL); + if (!request) + goto out_sys; + sccb = (struct sclp_async_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA); + if (!sccb) + goto out_mem; + rc = atomic_notifier_chain_register(&panic_notifier_list, + &call_home_panic_nb); + if (rc) + goto out_mem; + + strncpy(nodename, init_utsname()->nodename, 64); + return 0; + +out_mem: + kfree(request); + free_page((unsigned long) sccb); +out_sys: + unregister_sysctl_table(callhome_sysctl_header); +out_sclp: + sclp_unregister(&sclp_async_register); + return rc; + +} +module_init(sclp_async_init); + +static void __exit sclp_async_exit(void) +{ + atomic_notifier_chain_unregister(&panic_notifier_list, + &call_home_panic_nb); + unregister_sysctl_table(callhome_sysctl_header); + sclp_unregister(&sclp_async_register); + free_page((unsigned long) sccb); + kfree(request); +} +module_exit(sclp_async_exit); + +MODULE_AUTHOR("Copyright IBM Corp. 2009"); +MODULE_AUTHOR("Hans-Joachim Picht "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SCLP Asynchronous Notification Records"); -- cgit v1.2.3-70-g09d2 From f64d04c042193183c6dad98944ae2861b998e8b7 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Fri, 11 Sep 2009 10:28:59 +0200 Subject: [S390] s390dbf: Add description for usage of "%s" in sprintf events Using "%s" in sprintf event functions is dangerous. This patch adds a short description for this issue to the s390 debug feature documentation. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- Documentation/s390/s390dbf.txt | 7 +++++++ arch/s390/include/asm/debug.h | 9 ++++++++- 2 files changed, 15 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt index 2d10053dd97..ae66f9b90a2 100644 --- a/Documentation/s390/s390dbf.txt +++ b/Documentation/s390/s390dbf.txt @@ -495,6 +495,13 @@ and for each vararg a long value. So e.g. for a debug entry with a format string plus two varargs one would need to allocate a (3 * sizeof(long)) byte data area in the debug_register() function. +IMPORTANT: Using "%s" in sprintf event functions is dangerous. You can only +use "%s" in the sprintf event functions, if the memory for the passed string is +available as long as the debug feature exists. The reason behind this is that +due to performance considerations only a pointer to the string is stored in +the debug feature. If you log a string that is freed afterwards, you will get +an OOPS when inspecting the debug feature, because then the debug feature will +access the already freed memory. NOTE: If using the sprintf view do NOT use other event/exception functions than the sprintf-event and -exception functions. diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h index 31ed5686a96..18124b75a7a 100644 --- a/arch/s390/include/asm/debug.h +++ b/arch/s390/include/asm/debug.h @@ -167,6 +167,10 @@ debug_text_event(debug_info_t* id, int level, const char* txt) return debug_event_common(id,level,txt,strlen(txt)); } +/* + * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are + * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details! + */ extern debug_entry_t * debug_sprintf_event(debug_info_t* id,int level,char *string,...) __attribute__ ((format(printf, 3, 4))); @@ -206,7 +210,10 @@ debug_text_exception(debug_info_t* id, int level, const char* txt) return debug_exception_common(id,level,txt,strlen(txt)); } - +/* + * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are + * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details! + */ extern debug_entry_t * debug_sprintf_exception(debug_info_t* id,int level,char *string,...) __attribute__ ((format(printf, 3, 4))); -- cgit v1.2.3-70-g09d2 From 7c8b56795fdf59761ee3475b6add2fd4b635d2b6 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Sun, 5 Jul 2009 10:51:21 -0300 Subject: V4L/DVB (12190): em28xx: Add support for Gadmei UTV330+ em28xx: Add support for Gadmei UTV330+ Signed-off-by: Zhenyu Wang Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 2 +- drivers/media/video/em28xx/em28xx-cards.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index e352d754875..66e5f829577 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -33,7 +33,7 @@ 34 -> Terratec Cinergy A Hybrid XS (em2860) [0ccd:004f] 35 -> Typhoon DVD Maker (em2860) 36 -> NetGMBH Cam (em2860) - 37 -> Gadmei UTV330 (em2860) + 37 -> Gadmei UTV330 (em2860) [eb1a:50a6] 38 -> Yakumo MovieMixer (em2861) 39 -> KWorld PVRTV 300U (em2861) [eb1a:e300] 40 -> Plextor ConvertX PX-TV100U (em2861) [093b:a005] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 1c2e544eda7..22a464f5007 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1649,6 +1649,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, { USB_DEVICE(0x04bb, 0x0515), .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, + { USB_DEVICE(0xeb1a, 0x50a6), + .driver_info = EM2860_BOARD_GADMEI_UTV330 }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); -- cgit v1.2.3-70-g09d2 From 3eed78259935bc833242f6d47e7b77cd327334c7 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 20 Jun 2009 04:58:57 -0300 Subject: V4L/DVB (12227): gspca - pac7311: Webcam 093a:2629 added. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac7311.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 573f95b5880..8978386d36f 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -235,6 +235,7 @@ pac7311 093a:2621 PAC731x pac7311 093a:2622 Genius Eye 312 pac7311 093a:2624 PAC7302 pac7311 093a:2626 Labtec 2200 +pac7311 093a:2629 Genious iSlim 300 pac7311 093a:262a Webcam 300k pac7311 093a:262c Philips SPC 230 NC zc3xx 0ac8:0302 Z-star Vimicro zc0302 diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index e1e3a3a5048..0caf3c07573 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -1068,6 +1068,7 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2622), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302}, + {USB_DEVICE(0x093a, 0x2629), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x262a), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x262c), .driver_info = SENSOR_PAC7302}, {} -- cgit v1.2.3-70-g09d2 From 1852e75a55287156f2a435ca4ea4f8c1c75bac6c Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 27 Jun 2009 05:33:48 -0300 Subject: V4L/DVB (12228): gspca - vc032x: Webcam 0ac8:c301 added. Only the back sensor (mi1320_soc) is usable. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/vc032x.c | 46 ++++++++++++++++++++++++++----------- 2 files changed, 34 insertions(+), 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 8978386d36f..7045ebf1d72 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -248,6 +248,7 @@ zc3xx 0ac8:305b Z-star Vimicro zc0305b zc3xx 0ac8:307b Ldlc VC302+Ov7620 vc032x 0ac8:c001 Sony embedded vimicro vc032x 0ac8:c002 Sony embedded vimicro +vc032x 0ac8:c301 Samsung Q1 Ultra Premium spca508 0af9:0010 Hama USB Sightcam 100 spca508 0af9:0011 Hama USB Sightcam 100 sonixb 0c45:6001 Genius VideoCAM NB diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index 26dd155efcc..5b6f717d3fe 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -52,6 +52,7 @@ struct sd { #define SENSOR_OV7670 6 #define SENSOR_PO1200 7 #define SENSOR_PO3130NC 8 + u8 ninput; /* != 0 when 2 sensors - SamsungQ1 */ }; /* V4L2 controls supported by the driver */ @@ -2342,11 +2343,18 @@ static u16 read_sensor_register(struct gspca_dev *gspca_dev, static int vc032x_probe_sensor(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; struct usb_device *dev = gspca_dev->dev; int i; u16 value; const struct sensor_info *ptsensor_info; +/*fixme: should also check the other sensor (back mi1320_soc, front mc501cb)*/ + if (sd->ninput != 0) { + reg_w(dev, 0xa0, 0x01, 0xb301); + reg_w(dev, 0x89, 0xf0ff, 0xffff); /* select the back sensor */ + } + reg_r(gspca_dev, 0xa1, 0xbfcf, 1); PDEBUG(D_PROBE, "check sensor header %02x", gspca_dev->usb_buf[0]); for (i = 0; i < ARRAY_SIZE(sensor_info_data); i++) { @@ -2466,7 +2474,8 @@ static int sd_config(struct gspca_dev *gspca_dev, }; cam = &gspca_dev->cam; - sd->bridge = id->driver_info; + sd->bridge = id->driver_info >> 8; + sd->ninput = id->driver_info & 0xff; sensor = vc032x_probe_sensor(gspca_dev); switch (sensor) { case -1: @@ -2635,6 +2644,13 @@ static int sd_start(struct gspca_dev *gspca_dev) mi1320_soc_InitQVGA, }; +/*fixme: back sensor only*/ + if (sd->ninput != 0) { + reg_w(gspca_dev->dev, 0x89, 0xf0ff, 0xffff); + reg_w(gspca_dev->dev, 0xa9, 0x8348, 0x000e); + reg_w(gspca_dev->dev, 0xa9, 0x0000, 0x001a); + } + /* Assume start use the good resolution from gspca_dev->mode */ if (sd->bridge == BRIDGE_VC0321) { reg_w(gspca_dev->dev, 0xa0, 0xff, 0xbfec); @@ -2906,19 +2922,23 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ +#define BF(bridge, flags) \ + .driver_info = (BRIDGE_ ## bridge << 8) \ + | (flags) static const __devinitdata struct usb_device_id device_table[] = { - {USB_DEVICE(0x041e, 0x405b), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x046d, 0x0892), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x046d, 0x0896), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x046d, 0x0897), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0x0321), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0x0323), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x0ac8, 0x0328), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0xc001), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0xc002), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x15b8, 0x6001), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x15b8, 0x6002), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x17ef, 0x4802), .driver_info = BRIDGE_VC0323}, + {USB_DEVICE(0x041e, 0x405b), BF(VC0323, 0)}, + {USB_DEVICE(0x046d, 0x0892), BF(VC0321, 0)}, + {USB_DEVICE(0x046d, 0x0896), BF(VC0321, 0)}, + {USB_DEVICE(0x046d, 0x0897), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0x0321), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0x0323), BF(VC0323, 0)}, + {USB_DEVICE(0x0ac8, 0x0328), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0xc001), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0xc002), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0xc301), BF(VC0323, 1)}, + {USB_DEVICE(0x15b8, 0x6001), BF(VC0323, 0)}, + {USB_DEVICE(0x15b8, 0x6002), BF(VC0323, 0)}, + {USB_DEVICE(0x17ef, 0x4802), BF(VC0323, 0)}, {} }; MODULE_DEVICE_TABLE(usb, device_table); -- cgit v1.2.3-70-g09d2 From 2365b2d307ee0323062c674ea0495584085e8c24 Mon Sep 17 00:00:00 2001 From: David Wong Date: Wed, 17 Jun 2009 01:38:12 -0300 Subject: V4L/DVB (12272): cx23885: add card Magic-Pro ProHDTV Extreme 2 cx23885: add card Magic-Pro ProHDTV Extreme 2 PCI-E. Signed-off-by: David T.L. Wong Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 1 + drivers/media/video/cx23885/cx23885-cards.c | 12 ++++++++++- drivers/media/video/cx23885/cx23885-dvb.c | 33 +++++++++++++++++++++++++++++ drivers/media/video/cx23885/cx23885.h | 1 + 4 files changed, 46 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 450b8f8c389..19feb514f93 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -21,3 +21,4 @@ 20 -> Hauppauge WinTV-HVR1255 [0070:2251] 21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295] 22 -> Mygica X8506 DMB-TH [14f1:8651] + 23 -> Magic-Pro ProHDTV Extreme 2 [14f1:8657] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index ce29b5e34a1..a9d36298147 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -201,6 +201,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Mygica X8506 DMB-TH", .portb = CX23885_MPEG_DVB, }, + [CX23885_BOARD_MAGICPRO_PROHDTVE2] = { + .name = "Magic-Pro ProHDTV Extreme 2", + .portb = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -324,6 +328,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x14f1, .subdevice = 0x8651, .card = CX23885_BOARD_MYGICA_X8506, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8657, + .card = CX23885_BOARD_MAGICPRO_PROHDTVE2, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -715,8 +723,9 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx23885_gpio_set(dev, GPIO_9); break; case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: /* GPIO-1 reset XC5000 */ - /* GPIO-2 reset LGS8GL5 */ + /* GPIO-2 reset LGS8GL5 / LGS8G75 */ cx_set(GP0_IO, 0x00060000); cx_clear(GP0_IO, 0x00000006); mdelay(100); @@ -827,6 +836,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: ts1->gen_ctrl_val = 0x5; /* Parallel */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 86ac529e62b..e4a22dcaf59 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -487,6 +487,26 @@ static int cx23885_dvb_set_frontend(struct dvb_frontend *fe, port->set_frontend_save(fe, param) : -ENODEV; } +static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = { + .prod = LGS8GXX_PROD_LGS8G75, + .demod_address = 0x19, + .serial_ts = 0, + .ts_clk_pol = 1, + .ts_clk_gated = 1, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 6500, /* 6.50 MHz */ + .if_neg_center = 1, + .ext_adc = 0, + .adc_signed = 1, + .adc_vpp = 2, /* 1.6 Vpp */ + .if_neg_edge = 1, +}; + +static struct xc5000_config magicpro_prohdtve2_xc5000_config = { + .i2c_address = 0x61, + .if_khz = 6500, +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -833,6 +853,19 @@ static int dvb_register(struct cx23885_tsport *port) &mygica_x8506_xc5000_config); } break; + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, + &magicpro_prohdtve2_lgs8g75_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus2->i2c_adap, + &magicpro_prohdtve2_xc5000_config); + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 76a51509d8f..d68574d867c 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -76,6 +76,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1255 20 #define CX23885_BOARD_HAUPPAUGE_HVR1210 21 #define CX23885_BOARD_MYGICA_X8506 22 +#define CX23885_BOARD_MAGICPRO_PROHDTVE2 23 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- cgit v1.2.3-70-g09d2 From af5f88c8776b2b9163460ff94127f68a9a0e02da Mon Sep 17 00:00:00 2001 From: Johannes Goerner Date: Thu, 9 Jul 2009 03:28:46 -0300 Subject: V4L/DVB (12281): gspca - sunplus: Webcam 052b:1803 added. Signed-off-by: Johannes Goerner Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/sunplus.c | 10 ++++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 7045ebf1d72..37247697dbe 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -140,6 +140,7 @@ spca500 04fc:7333 PalmPixDC85 sunplus 04fc:ffff Pure DigitalDakota spca501 0506:00df 3Com HomeConnect Lite sunplus 052b:1513 Megapix V4 +sunplus 052b:1803 MegaImage VI tv8532 0545:808b Veo Stingray tv8532 0545:8333 Veo Stingray sunplus 0546:3155 Polaroid PDC3070 diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index 5127bbf9dd2..eabad47a3ca 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -52,6 +52,7 @@ struct sd { #define LogitechClickSmart420 2 #define LogitechClickSmart820 3 #define MegapixV4 4 +#define MegaImageVI 5 u8 *jpeg_hdr; }; @@ -844,7 +845,10 @@ static int sd_config(struct gspca_dev *gspca_dev, break; case BRIDGE_SPCA533: cam->cam_mode = custom_mode; - cam->nmodes = sizeof custom_mode / sizeof custom_mode[0]; + if (sd->subtype == MegaImageVI) /* 320x240 only */ + cam->nmodes = ARRAY_SIZE(custom_mode) - 1; + else + cam->nmodes = ARRAY_SIZE(custom_mode); break; case BRIDGE_SPCA504C: cam->cam_mode = vga_mode2; @@ -988,7 +992,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* case BRIDGE_SPCA533: */ /* case BRIDGE_SPCA536: */ if (sd->subtype == MegapixV4 || - sd->subtype == LogitechClickSmart820) { + sd->subtype == LogitechClickSmart820 || + sd->subtype == MegaImageVI) { reg_w(gspca_dev, 0xf0, 0, 0, 0); spca504B_WaitCmdStatus(gspca_dev); reg_r(gspca_dev, 0xf0, 4, 0); @@ -1384,6 +1389,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x04fc, 0x5360), BS(SPCA536, 0)}, {USB_DEVICE(0x04fc, 0xffff), BS(SPCA504B, 0)}, {USB_DEVICE(0x052b, 0x1513), BS(SPCA533, MegapixV4)}, + {USB_DEVICE(0x052b, 0x1803), BS(SPCA533, MegaImageVI)}, {USB_DEVICE(0x0546, 0x3155), BS(SPCA533, 0)}, {USB_DEVICE(0x0546, 0x3191), BS(SPCA504B, 0)}, {USB_DEVICE(0x0546, 0x3273), BS(SPCA504B, 0)}, -- cgit v1.2.3-70-g09d2 From 1369738023900302ef9677c90c4da873b5593ee7 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 20 Jul 2009 15:37:25 -0300 Subject: V4L/DVB (12306): cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850 cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850 Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 1 + drivers/media/video/cx23885/cx23885-cards.c | 49 ++++++++++++++++++++++++++++- drivers/media/video/cx23885/cx23885-dvb.c | 11 +++++++ drivers/media/video/cx23885/cx23885.h | 1 + 4 files changed, 61 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 19feb514f93..525edb37c75 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -22,3 +22,4 @@ 21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295] 22 -> Mygica X8506 DMB-TH [14f1:8651] 23 -> Magic-Pro ProHDTV Extreme 2 [14f1:8657] + 24 -> Hauppauge WinTV-HVR1850 [0070:8541] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 2bf8ed604d6..3143d85ef31 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -205,6 +205,11 @@ struct cx23885_board cx23885_boards[] = { .name = "Magic-Pro ProHDTV Extreme 2", .portb = CX23885_MPEG_DVB, }, + [CX23885_BOARD_HAUPPAUGE_HVR1850] = { + .name = "Hauppauge WinTV-HVR1850", + .portb = CX23885_MPEG_ENCODER, + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -332,6 +337,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x14f1, .subdevice = 0x8657, .card = CX23885_BOARD_MAGICPRO_PROHDTVE2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8541, + .card = CX23885_BOARD_HAUPPAUGE_HVR1850, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -491,8 +500,13 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) /* WinTV-HVR1700 (PCIe, OEM, No IR, full height) * DVB-T and MPEG2 HW Encoder */ break; + case 85021: + /* WinTV-HVR1850 (PCIe, OEM, RCA in, IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + break; default: - printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n", + printk(KERN_WARNING "%s: warning: " + "unknown hauppauge model #%d\n", dev->name, tv.model); break; } @@ -742,6 +756,36 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx_set(GP0_IO, 0x00060006); mdelay(100); break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + /* GPIO-0 656_CLK */ + /* GPIO-1 656_D0 */ + /* GPIO-2 Wake# */ + /* GPIO-3-10 cx23417 data0-7 */ + /* GPIO-11-14 cx23417 addr0-3 */ + /* GPIO-15-18 cx23417 READY, CS, RD, WR */ + /* GPIO-19 IR_RX */ + /* GPIO-20 C_IR_TX */ + /* GPIO-21 I2S DAT */ + /* GPIO-22 I2S WCLK */ + /* GPIO-23 I2S BCLK */ + /* ALT GPIO: EXP GPIO LATCH */ + + /* CX23417 GPIO's */ + /* GPIO-14 S5H1411/CX24228 Reset */ + /* GPIO-13 EEPROM write protect */ + mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1); + + /* Put the demod into reset and protect the eeprom */ + mc417_gpio_clear(dev, GPIO_14 | GPIO_13); + mdelay(100); + + /* Bring the demod out of reset */ + mc417_gpio_set(dev, GPIO_14); + mdelay(100); + + /* CX24228 GPIO */ + /* Connected to IF / Mux */ + break; } } @@ -758,6 +802,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: case CX23885_BOARD_HAUPPAUGE_HVR1210: + case CX23885_BOARD_HAUPPAUGE_HVR1850: /* FIXME: Implement me */ break; case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: @@ -797,6 +842,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: case CX23885_BOARD_HAUPPAUGE_HVR1210: + case CX23885_BOARD_HAUPPAUGE_HVR1850: if (dev->i2c_bus[0].i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xc0); break; @@ -864,6 +910,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: case CX23885_BOARD_HAUPPAUGE_HVR1210: + case CX23885_BOARD_HAUPPAUGE_HVR1850: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index e4a22dcaf59..f87a023a735 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -866,6 +866,17 @@ static int dvb_register(struct cx23885_tsport *port) &magicpro_prohdtve2_xc5000_config); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[0].i2c_adap, + &hauppauge_tda18271_config); + break; + default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 0958d6a7ffd..963e6b17a43 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -77,6 +77,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1210 21 #define CX23885_BOARD_MYGICA_X8506 22 #define CX23885_BOARD_MAGICPRO_PROHDTVE2 23 +#define CX23885_BOARD_HAUPPAUGE_HVR1850 24 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- cgit v1.2.3-70-g09d2 From e3e1920b28d47cb18b477fc9884b889f9622fc97 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Wed, 22 Jul 2009 21:02:44 -0300 Subject: V4L/DVB (12334): tuner-simple: Add an entry for the Partsnic PTI-5NF05 NTSC tuner Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.tuner | 1 + drivers/media/common/tuners/tuner-types.c | 25 +++++++++++++++++++++++++ include/media/tuner.h | 1 + 3 files changed, 27 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index be67844074d..ba9fa679e2d 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -78,3 +78,4 @@ tuner=77 - TCL tuner MF02GIP-5N-E tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner tuner=79 - Philips PAL/SECAM multi (FM1216 MK5) tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough +tuner=81 - Partsnic (Daewoo) PTI-5NF05 diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index 6a7f1a417c2..5c6ef1e23c9 100644 --- a/drivers/media/common/tuners/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -1301,6 +1301,25 @@ static struct tuner_params tuner_fq1216lme_mk3_params[] = { }, }; +/* ----- TUNER_PARTSNIC_PTI_5NF05 - Partsnic (Daewoo) PTI-5NF05 NTSC ----- */ + +static struct tuner_range tuner_partsnic_pti_5nf05_ranges[] = { + /* The datasheet specified channel ranges and the bandswitch byte */ + /* The control byte value of 0x8e is just a guess */ + { 16 * 133.25 /*MHz*/, 0x8e, 0x01, }, /* Channels 2 - B */ + { 16 * 367.25 /*MHz*/, 0x8e, 0x02, }, /* Channels C - W+11 */ + { 16 * 999.99 , 0x8e, 0x08, }, /* Channels W+12 - 69 */ +}; + +static struct tuner_params tuner_partsnic_pti_5nf05_params[] = { + { + .type = TUNER_PARAM_TYPE_NTSC, + .ranges = tuner_partsnic_pti_5nf05_ranges, + .count = ARRAY_SIZE(tuner_partsnic_pti_5nf05_ranges), + .cb_first_if_lower_freq = 1, /* not specified but safe to do */ + }, +}; + /* --------------------------------------------------------------------- */ struct tunertype tuners[] = { @@ -1753,6 +1772,12 @@ struct tunertype tuners[] = { .params = tuner_fq1216lme_mk3_params, .count = ARRAY_SIZE(tuner_fq1216lme_mk3_params), }, + + [TUNER_PARTSNIC_PTI_5NF05] = { + .name = "Partsnic (Daewoo) PTI-5NF05", + .params = tuner_partsnic_pti_5nf05_params, + .count = ARRAY_SIZE(tuner_partsnic_pti_5nf05_params), + }, }; EXPORT_SYMBOL(tuners); diff --git a/include/media/tuner.h b/include/media/tuner.h index cbf97f45fbe..c146f2f530b 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -126,6 +126,7 @@ #define TUNER_PHILIPS_FMD1216MEX_MK3 78 #define TUNER_PHILIPS_FM1216MK5 79 #define TUNER_PHILIPS_FQ1216LME_MK3 80 /* Active loopthrough, no FM */ +#define TUNER_PARTSNIC_PTI_5NF05 81 /* tv card specific */ #define TDA9887_PRESENT (1<<0) -- cgit v1.2.3-70-g09d2 From 6baefab531b22288be3b4ddef5671ea6469b09f8 Mon Sep 17 00:00:00 2001 From: Denis Loginov Date: Tue, 28 Jul 2009 03:39:10 -0300 Subject: V4L/DVB (12356): gspca - sonixj: Webcam 0c45:6148 added Signed-off-by: Denis Loginov Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/sonixj.c | 8 ++++++-- 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 37247697dbe..b4370247013 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -287,6 +287,7 @@ sonixj 0c45:613a Microdia Sonix PC Camera sonixj 0c45:613b Surfer SN-206 sonixj 0c45:613c Sonix Pccam168 sonixj 0c45:6143 Sonix Pccam168 +sonixj 0c45:6148 Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001) sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111) sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 3f3e1705ce7..f0b762f770f 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -2339,7 +2339,8 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x60fe), BSI(SN9C105, OV7630, 0x21)}, #endif {USB_DEVICE(0x0c45, 0x6100), BSI(SN9C120, MI0360, 0x5d)}, /*sn9c128*/ -/* {USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */ +/* {USB_DEVICE(0x0c45, 0x6102), BSI(SN9C120, PO2030N, ??)}, */ +/* {USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6802, 0x21)}, */ {USB_DEVICE(0x0c45, 0x610a), BSI(SN9C120, OV7648, 0x21)}, /*sn9c128*/ {USB_DEVICE(0x0c45, 0x610b), BSI(SN9C120, OV7660, 0x21)}, /*sn9c128*/ {USB_DEVICE(0x0c45, 0x610c), BSI(SN9C120, HV7131R, 0x11)}, /*sn9c128*/ @@ -2355,6 +2356,7 @@ static const __devinitdata struct usb_device_id device_table[] = { #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x6130), BSI(SN9C120, MI0360, 0x5d)}, #endif +/* {USB_DEVICE(0x0c45, 0x6132), BSI(SN9C120, OV7670, 0x21)}, */ {USB_DEVICE(0x0c45, 0x6138), BSI(SN9C120, MO4000, 0x21)}, {USB_DEVICE(0x0c45, 0x613a), BSI(SN9C120, OV7648, 0x21)}, #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE @@ -2362,7 +2364,9 @@ static const __devinitdata struct usb_device_id device_table[] = { #endif {USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)}, {USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x21)}, - {USB_DEVICE(0x0c45, 0x6143), BSI(SN9C120, SP80708, 0x18)}, +/* {USB_DEVICE(0x0c45, 0x6142), BSI(SN9C120, PO2030N, ??)}, *sn9c120b*/ + {USB_DEVICE(0x0c45, 0x6143), BSI(SN9C120, SP80708, 0x18)}, /*sn9c120b*/ + {USB_DEVICE(0x0c45, 0x6148), BSI(SN9C120, OM6802, 0x21)}, /*sn9c120b*/ {} }; MODULE_DEVICE_TABLE(usb, device_table); -- cgit v1.2.3-70-g09d2 From 575f9af89952c7e7703e48666d95609daaf99630 Mon Sep 17 00:00:00 2001 From: Mhayk Whandson Date: Tue, 28 Jul 2009 11:53:20 -0300 Subject: V4L/DVB (12370): v4l doc: fix cqcam source code path Fixed the c-qcam source code path in the linux kernel tree. Signed-off-by: Mhayk Whandson Signed-off-by: Randy Dunlap Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CQcam.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CQcam.txt b/Documentation/video4linux/CQcam.txt index 04986efb731..d230878e473 100644 --- a/Documentation/video4linux/CQcam.txt +++ b/Documentation/video4linux/CQcam.txt @@ -18,8 +18,8 @@ Table of Contents 1.0 Introduction - The file ../drivers/char/c-qcam.c is a device driver for the -Logitech (nee Connectix) parallel port interface color CCD camera. + The file ../../drivers/media/video/c-qcam.c is a device driver for +the Logitech (nee Connectix) parallel port interface color CCD camera. This is a fairly inexpensive device for capturing images. Logitech does not currently provide information for developers, but many people have engineered several solutions for non-Microsoft use of the Color -- cgit v1.2.3-70-g09d2 From 4d14c833c0d5f926721da1e0b07287ab8b64f0ba Mon Sep 17 00:00:00 2001 From: Vlastimil Labsky Date: Mon, 10 Aug 2009 22:15:54 -0300 Subject: V4L/DVB (12439): cx88: add support for WinFast DTV2000H rev. J I updated and simplyfied patch from Zbynek Hrabovsky for recent kernel. It enables autodetection of card, sound in analog TV , sound in FM radio and switching between antenna and cable RF input. Radio tuner still doesn't work, I don't even know how it works. Some guys wrote me that FM radio works with TV tuner used instead of radio part (symlink video0 -> radio0). Cc: Gerd Knorr Signed-off-by: Vlastimil Labsky Signed-off-by: Andrew Morton Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx88 | 1 + drivers/media/video/cx88/cx88-cards.c | 49 +++++++++++++++++++++++++++++++++ drivers/media/video/cx88/cx88-dvb.c | 1 + drivers/media/video/cx88/cx88-input.c | 1 + drivers/media/video/cx88/cx88.h | 1 + 5 files changed, 53 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 0736518b2f8..3385f8b094a 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -80,3 +80,4 @@ 79 -> Terratec Cinergy HT PCI MKII [153b:1177] 80 -> Hauppauge WinTV-IR Only [0070:9290] 81 -> Leadtek WinFast DTV1800 Hybrid [107d:6654] + 82 -> WinFast DTV2000 H rev. J [107d:6f2b] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 39465301ec9..43aa7e06e5b 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1283,6 +1283,51 @@ static const struct cx88_board cx88_boards[] = { }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_WINFAST_DTV2000H_J] = { + .name = "WinFast DTV2000 H rev. J", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00017300, + .gpio1 = 0x00008207, + .gpio2 = 0x00000000, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00018300, + .gpio1 = 0x0000f207, + .gpio2 = 0x00017304, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00018301, + .gpio1 = 0x0000f207, + .gpio2 = 0x00017304, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00018301, + .gpio1 = 0x0000f207, + .gpio2 = 0x00017304, + .gpio3 = 0x02000000, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x00015702, + .gpio1 = 0x0000f207, + .gpio2 = 0x00015702, + .gpio3 = 0x02000000, + }, + .mpeg = CX88_MPEG_DVB, + }, [CX88_BOARD_GENIATECH_DVBS] = { .name = "Geniatech DVB-S", .tuner_type = TUNER_ABSENT, @@ -2281,6 +2326,10 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x107d, .subdevice = 0x665e, .card = CX88_BOARD_WINFAST_DTV2000H, + },{ + .subvendor = 0x107d, + .subdevice = 0x6f2b, + .card = CX88_BOARD_WINFAST_DTV2000H_J, },{ .subvendor = 0x18ac, .subdevice = 0xd800, /* FusionHDTV 3 Gold (original revision) */ diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index e237b507659..1203e8d2c31 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -696,6 +696,7 @@ static int dvb_register(struct cx8802_dev *dev) } break; case CX88_BOARD_WINFAST_DTV2000H: + case CX88_BOARD_WINFAST_DTV2000H_J: case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR1100LP: case CX88_BOARD_HAUPPAUGE_HVR1300: diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index d91f5c51206..0abc3210072 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -225,6 +225,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->sampling = 1; break; case CX88_BOARD_WINFAST_DTV2000H: + case CX88_BOARD_WINFAST_DTV2000H_J: case CX88_BOARD_WINFAST_DTV1800H: ir_codes = ir_codes_winfast; ir->gpio_addr = MO_GP0_IO; diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 9d83762163f..d5cea41f420 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -237,6 +237,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII 79 #define CX88_BOARD_HAUPPAUGE_IRONLY 80 #define CX88_BOARD_WINFAST_DTV1800H 81 +#define CX88_BOARD_WINFAST_DTV2000H_J 82 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v1.2.3-70-g09d2 From 3040b043423c1726a14595d500f6409070b1e722 Mon Sep 17 00:00:00 2001 From: Theodore Kilgore Date: Mon, 3 Aug 2009 04:13:23 -0300 Subject: V4L/DVB (12459): gspca - jeilinj: New subdriver for Jeilin chip. Signed-off-by: Theodore Kilgore Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/Kconfig | 9 + drivers/media/video/gspca/Makefile | 2 + drivers/media/video/gspca/jeilinj.c | 388 ++++++++++++++++++++++++++++++++++++ 4 files changed, 400 insertions(+) create mode 100644 drivers/media/video/gspca/jeilinj.c (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index b4370247013..76203a2213a 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -239,6 +239,7 @@ pac7311 093a:2626 Labtec 2200 pac7311 093a:2629 Genious iSlim 300 pac7311 093a:262a Webcam 300k pac7311 093a:262c Philips SPC 230 NC +jeilinj 0979:0280 Sakar 57379 zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 vc032x 0ac8:0323 Vimicro Vc0323 diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index f114dd1507c..e800c22a9a8 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -47,6 +47,15 @@ config USB_GSPCA_FINEPIX To compile this driver as a module, choose M here: the module will be called gspca_finepix. +config USB_GSPCA_JEILINJ + tristate "Jeilin JPEG USB V4L2 driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on this Jeilin chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_jeilinj. + config USB_GSPCA_MARS tristate "Mars USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index f6d3b86e9ad..035616b5e86 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_USB_GSPCA) += gspca_main.o obj-$(CONFIG_USB_GSPCA_CONEX) += gspca_conex.o obj-$(CONFIG_USB_GSPCA_ETOMS) += gspca_etoms.o obj-$(CONFIG_USB_GSPCA_FINEPIX) += gspca_finepix.o +obj-$(CONFIG_USB_GSPCA_JEILINJ) += gspca_jeilinj.o obj-$(CONFIG_USB_GSPCA_MARS) += gspca_mars.o obj-$(CONFIG_USB_GSPCA_MR97310A) += gspca_mr97310a.o obj-$(CONFIG_USB_GSPCA_OV519) += gspca_ov519.o @@ -30,6 +31,7 @@ gspca_main-objs := gspca.o gspca_conex-objs := conex.o gspca_etoms-objs := etoms.o gspca_finepix-objs := finepix.o +gspca_jeilinj-objs := jeilinj.o gspca_mars-objs := mars.o gspca_mr97310a-objs := mr97310a.o gspca_ov519-objs := ov519.o diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/video/gspca/jeilinj.c new file mode 100644 index 00000000000..dbfa3ed6e8e --- /dev/null +++ b/drivers/media/video/gspca/jeilinj.c @@ -0,0 +1,388 @@ +/* + * Jeilinj subdriver + * + * Supports some Jeilin dual-mode cameras which use bulk transport and + * download raw JPEG data. + * + * Copyright (C) 2009 Theodore Kilgore + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MODULE_NAME "jeilinj" + +#include +#include "gspca.h" +#include "jpeg.h" + +MODULE_AUTHOR("Theodore Kilgore "); +MODULE_DESCRIPTION("GSPCA/JEILINJ USB Camera Driver"); +MODULE_LICENSE("GPL"); + +/* Default timeouts, in ms */ +#define JEILINJ_CMD_TIMEOUT 500 +#define JEILINJ_DATA_TIMEOUT 1000 + +/* Maximum transfer size to use. */ +#define JEILINJ_MAX_TRANSFER 0x200 + +#define FRAME_HEADER_LEN 0x10 + +/* Structure to hold all of our device specific stuff */ +struct sd { + struct gspca_dev gspca_dev; /* !! must be the first item */ + const struct v4l2_pix_format *cap_mode; + /* Driver stuff */ + struct work_struct work_struct; + struct workqueue_struct *work_thread; + u8 quality; /* image quality */ + u8 jpegqual; /* webcam quality */ + u8 *jpeg_hdr; +}; + + struct jlj_command { + unsigned char instruction[2]; + unsigned char ack_wanted; + }; + +/* AFAICT these cameras will only do 320x240. */ +static struct v4l2_pix_format jlj_mode[] = { + { 320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0} +}; + +/* + * cam uses endpoint 0x03 to send commands, 0x84 for read commands, + * and 0x82 for bulk transfer. + */ + +/* All commands are two bytes only */ +static int jlj_write2(struct gspca_dev *gspca_dev, unsigned char *command) +{ + int retval; + + memcpy(gspca_dev->usb_buf, command, 2); + retval = usb_bulk_msg(gspca_dev->dev, + usb_sndbulkpipe(gspca_dev->dev, 3), + gspca_dev->usb_buf, 2, NULL, 500); + if (retval < 0) + PDEBUG(D_ERR, "command write [%02x] error %d", + gspca_dev->usb_buf[0], retval); + return retval; +} + +/* Responses are one byte only */ +static int jlj_read1(struct gspca_dev *gspca_dev, unsigned char response) +{ + int retval; + + retval = usb_bulk_msg(gspca_dev->dev, + usb_rcvbulkpipe(gspca_dev->dev, 0x84), + gspca_dev->usb_buf, 1, NULL, 500); + response = gspca_dev->usb_buf[0]; + if (retval < 0) + PDEBUG(D_ERR, "read command [%02x] error %d", + gspca_dev->usb_buf[0], retval); + return retval; +} + +static int jlj_start(struct gspca_dev *gspca_dev) +{ + int i; + int retval = -1; + u8 response = 0xff; + struct jlj_command start_commands[] = { + {{0x71, 0x81}, 0}, + {{0x70, 0x05}, 0}, + {{0x95, 0x70}, 1}, + {{0x71, 0x81}, 0}, + {{0x70, 0x04}, 0}, + {{0x95, 0x70}, 1}, + {{0x71, 0x00}, 0}, + {{0x70, 0x08}, 0}, + {{0x95, 0x70}, 1}, + {{0x94, 0x02}, 0}, + {{0xde, 0x24}, 0}, + {{0x94, 0x02}, 0}, + {{0xdd, 0xf0}, 0}, + {{0x94, 0x02}, 0}, + {{0xe3, 0x2c}, 0}, + {{0x94, 0x02}, 0}, + {{0xe4, 0x00}, 0}, + {{0x94, 0x02}, 0}, + {{0xe5, 0x00}, 0}, + {{0x94, 0x02}, 0}, + {{0xe6, 0x2c}, 0}, + {{0x94, 0x03}, 0}, + {{0xaa, 0x00}, 0}, + {{0x71, 0x1e}, 0}, + {{0x70, 0x06}, 0}, + {{0x71, 0x80}, 0}, + {{0x70, 0x07}, 0} + }; + for (i = 0; i < ARRAY_SIZE(start_commands); i++) { + retval = jlj_write2(gspca_dev, start_commands[i].instruction); + if (retval < 0) + return retval; + if (start_commands[i].ack_wanted) + retval = jlj_read1(gspca_dev, response); + if (retval < 0) + return retval; + } + PDEBUG(D_ERR, "jlj_start retval is %d", retval); + return retval; +} + +static int jlj_stop(struct gspca_dev *gspca_dev) +{ + int i; + int retval; + struct jlj_command stop_commands[] = { + {{0x71, 0x00}, 0}, + {{0x70, 0x09}, 0}, + {{0x71, 0x80}, 0}, + {{0x70, 0x05}, 0} + }; + for (i = 0; i < ARRAY_SIZE(stop_commands); i++) { + retval = jlj_write2(gspca_dev, stop_commands[i].instruction); + if (retval < 0) + return retval; + } + return retval; +} + +/* This function is called as a workqueue function and runs whenever the camera + * is streaming data. Because it is a workqueue function it is allowed to sleep + * so we can use synchronous USB calls. To avoid possible collisions with other + * threads attempting to use the camera's USB interface the gspca usb_lock is + * used when performing the one USB control operation inside the workqueue, + * which tells the camera to close the stream. In practice the only thing + * which needs to be protected against is the usb_set_interface call that + * gspca makes during stream_off. Otherwise the camera doesn't provide any + * controls that the user could try to change. + */ + +static void jlj_dostream(struct work_struct *work) +{ + struct sd *dev = container_of(work, struct sd, work_struct); + struct gspca_dev *gspca_dev = &dev->gspca_dev; + struct gspca_frame *frame; + int blocks_left; /* 0x200-sized blocks remaining in current frame. */ + int size_in_blocks; + int act_len; + int discarding = 0; /* true if we failed to get space for frame. */ + int packet_type; + int ret; + u8 *buffer; + + buffer = kmalloc(JEILINJ_MAX_TRANSFER, GFP_KERNEL | GFP_DMA); + if (!buffer) { + PDEBUG(D_ERR, "Couldn't allocate USB buffer"); + goto quit_stream; + } + while (gspca_dev->present && gspca_dev->streaming) { + if (!gspca_dev->present) + goto quit_stream; + /* Start a new frame, and add the JPEG header, first thing */ + frame = gspca_get_i_frame(gspca_dev); + if (frame && !discarding) + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + dev->jpeg_hdr, JPEG_HDR_SZ); + else + discarding = 1; + /* + * Now request data block 0. Line 0 reports the size + * to download, in blocks of size 0x200, and also tells the + * "actual" data size, in bytes, which seems best to ignore. + */ + ret = usb_bulk_msg(gspca_dev->dev, + usb_rcvbulkpipe(gspca_dev->dev, 0x82), + buffer, JEILINJ_MAX_TRANSFER, &act_len, + JEILINJ_DATA_TIMEOUT); + PDEBUG(D_STREAM, + "Got %d bytes out of %d for Block 0", + act_len, JEILINJ_MAX_TRANSFER); + if (ret < 0 || act_len < FRAME_HEADER_LEN) + goto quit_stream; + size_in_blocks = buffer[0x0a]; + blocks_left = buffer[0x0a] - 1; + PDEBUG(D_STREAM, "blocks_left = 0x%x", blocks_left); + packet_type = INTER_PACKET; + if (frame && !discarding) + /* Toss line 0 of data block 0, keep the rest. */ + gspca_frame_add(gspca_dev, packet_type, + frame, buffer + FRAME_HEADER_LEN, + JEILINJ_MAX_TRANSFER - FRAME_HEADER_LEN); + else + discarding = 1; + while (blocks_left > 0) { + if (!gspca_dev->present) + goto quit_stream; + ret = usb_bulk_msg(gspca_dev->dev, + usb_rcvbulkpipe(gspca_dev->dev, 0x82), + buffer, JEILINJ_MAX_TRANSFER, &act_len, + JEILINJ_DATA_TIMEOUT); + if (ret < 0 || act_len < JEILINJ_MAX_TRANSFER) + goto quit_stream; + PDEBUG(D_STREAM, + "%d blocks remaining for frame", blocks_left); + blocks_left -= 1; + if (blocks_left == 0) + packet_type = LAST_PACKET; + else + packet_type = INTER_PACKET; + if (frame && !discarding) + gspca_frame_add(gspca_dev, packet_type, + frame, buffer, + JEILINJ_MAX_TRANSFER); + else + discarding = 1; + } + } +quit_stream: + mutex_lock(&gspca_dev->usb_lock); + if (gspca_dev->present) + jlj_stop(gspca_dev); + mutex_unlock(&gspca_dev->usb_lock); + kfree(buffer); +} + +/* This function is called at probe time just before sd_init */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct cam *cam = &gspca_dev->cam; + struct sd *dev = (struct sd *) gspca_dev; + + dev->quality = 85; + dev->jpegqual = 85; + PDEBUG(D_PROBE, + "JEILINJ camera detected" + " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct); + cam->cam_mode = jlj_mode; + cam->nmodes = 1; + cam->bulk = 1; + /* We don't use the buffer gspca allocates so make it small. */ + cam->bulk_size = 32; + INIT_WORK(&dev->work_struct, jlj_dostream); + return 0; +} + +/* called on streamoff with alt==0 and on disconnect */ +/* the usb_lock is held at entry - restore on exit */ +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct sd *dev = (struct sd *) gspca_dev; + + /* wait for the work queue to terminate */ + mutex_unlock(&gspca_dev->usb_lock); + /* This waits for jlj_dostream to finish */ + destroy_workqueue(dev->work_thread); + dev->work_thread = NULL; + mutex_lock(&gspca_dev->usb_lock); + kfree(dev->jpeg_hdr); +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + return 0; +} + +/* Set up for getting frames. */ +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *dev = (struct sd *) gspca_dev; + int ret; + + /* create the JPEG header */ + dev->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + jpeg_define(dev->jpeg_hdr, gspca_dev->height, gspca_dev->width, + 0x21); /* JPEG 422 */ + jpeg_set_qual(dev->jpeg_hdr, dev->quality); + PDEBUG(D_STREAM, "Start streaming at 320x240"); + ret = jlj_start(gspca_dev); + if (ret < 0) { + PDEBUG(D_ERR, "Start streaming command failed"); + return ret; + } + /* Start the workqueue function to do the streaming */ + dev->work_thread = create_singlethread_workqueue(MODULE_NAME); + queue_work(dev->work_thread, &dev->work_struct); + + return 0; +} + +/* Table of supported USB devices */ +static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x0979, 0x0280)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = sd_config, + .init = sd_init, + .start = sd_start, + .stop0 = sd_stop0, +}; + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, + &sd_desc, + sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + int ret; + + ret = usb_register(&sd_driver); + if (ret < 0) + return ret; + PDEBUG(D_PROBE, "registered"); + return 0; +} + +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); + PDEBUG(D_PROBE, "deregistered"); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); -- cgit v1.2.3-70-g09d2 From 3c1c48bbcf892e97c4e965b8528f4d735bf9a746 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Thu, 2 Jul 2009 11:50:35 -0300 Subject: V4L/DVB (12465): cx88: High resolution timer for Remote Controls Patch solves problem of missed keystrokes on some remote controls, as reported on http://bugzilla.kernel.org/show_bug.cgi?id=9637 . Signed-off-by: Andrzej Hajda Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 1 + drivers/media/video/cx88/cx88-input.c | 25 +++++++++++++++++-------- 2 files changed, 18 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index c913e561419..dc0576afe5d 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -167,3 +167,4 @@ 166 -> Beholder BeholdTV 607 RDS [5ace:6073] 167 -> Beholder BeholdTV 609 RDS [5ace:6092] 168 -> Beholder BeholdTV 609 RDS [5ace:6093] +169 -> Compro VideoMate S350/S300 [185b:c900] diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 0abc3210072..79c4408a617 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -23,7 +23,7 @@ */ #include -#include +#include #include #include #include @@ -48,7 +48,7 @@ struct cx88_IR { /* poll external decoder */ int polling; - struct delayed_work work; + struct hrtimer timer; u32 gpio_addr; u32 last_gpio; u32 mask_keycode; @@ -144,19 +144,28 @@ static void cx88_ir_handle_key(struct cx88_IR *ir) } } -static void cx88_ir_work(struct work_struct *work) +static enum hrtimer_restart cx88_ir_work(struct hrtimer *timer) { - struct cx88_IR *ir = container_of(work, struct cx88_IR, work.work); + unsigned long missed; + struct cx88_IR *ir = container_of(timer, struct cx88_IR, timer); cx88_ir_handle_key(ir); - schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling)); + missed = hrtimer_forward_now(&ir->timer, + ktime_set(0, ir->polling * 1000000)); + if (missed > 1) + ir_dprintk("Missed ticks %ld\n", missed - 1); + + return HRTIMER_RESTART; } void cx88_ir_start(struct cx88_core *core, struct cx88_IR *ir) { if (ir->polling) { - INIT_DELAYED_WORK(&ir->work, cx88_ir_work); - schedule_delayed_work(&ir->work, 0); + hrtimer_init(&ir->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + ir->timer.function = cx88_ir_work; + hrtimer_start(&ir->timer, + ktime_set(0, ir->polling * 1000000), + HRTIMER_MODE_REL); } if (ir->sampling) { core->pci_irqmask |= PCI_INT_IR_SMPINT; @@ -173,7 +182,7 @@ void cx88_ir_stop(struct cx88_core *core, struct cx88_IR *ir) } if (ir->polling) - cancel_delayed_work_sync(&ir->work); + hrtimer_cancel(&ir->timer); } /* ---------------------------------------------------------------------- */ -- cgit v1.2.3-70-g09d2 From 436e7e7c07ff153be6ee22220f47c7fa62176a26 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Sat, 8 Aug 2009 09:01:34 -0300 Subject: V4L/DVB (12554): FM TX: si4713: Add document file This patch adds a document file for si4713 device driver. It describes the driver interfaces and organization. Signed-off-by: Eduardo Valentin Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/si4713.txt | 176 +++++++++++++++++++++++++++++++++++ 1 file changed, 176 insertions(+) create mode 100644 Documentation/video4linux/si4713.txt (limited to 'Documentation') diff --git a/Documentation/video4linux/si4713.txt b/Documentation/video4linux/si4713.txt new file mode 100644 index 00000000000..25abdb78209 --- /dev/null +++ b/Documentation/video4linux/si4713.txt @@ -0,0 +1,176 @@ +Driver for I2C radios for the Silicon Labs Si4713 FM Radio Transmitters + +Copyright (c) 2009 Nokia Corporation +Contact: Eduardo Valentin + + +Information about the Device +============================ +This chip is a Silicon Labs product. It is a I2C device, currently on 0x63 address. +Basically, it has transmission and signal noise level measurement features. + +The Si4713 integrates transmit functions for FM broadcast stereo transmission. +The chip also allows integrated receive power scanning to identify low signal +power FM channels. + +The chip is programmed using commands and responses. There are also several +properties which can change the behavior of this chip. + +Users must comply with local regulations on radio frequency (RF) transmission. + +Device driver description +========================= +There are two modules to handle this device. One is a I2C device driver +and the other is a platform driver. + +The I2C device driver exports a v4l2-subdev interface to the kernel. +All properties can also be accessed by v4l2 extended controls interface, by +using the v4l2-subdev calls (g_ext_ctrls, s_ext_ctrls). + +The platform device driver exports a v4l2 radio device interface to user land. +So, it uses the I2C device driver as a sub device in order to send the user +commands to the actual device. Basically it is a wrapper to the I2C device driver. + +Applications can use v4l2 radio API to specify frequency of operation, mute state, +etc. But mostly of its properties will be present in the extended controls. + +When the v4l2 mute property is set to 1 (true), the driver will turn the chip off. + +Properties description +====================== + +The properties can be accessed using v4l2 extended controls. +Here is an output from v4l2-ctl util: +/ # v4l2-ctl -d /dev/radio0 --all -L +Driver Info: + Driver name : radio-si4713 + Card type : Silicon Labs Si4713 Modulator + Bus info : + Driver version: 0 + Capabilities : 0x00080800 + RDS Output + Modulator +Audio output: 0 (FM Modulator Audio Out) +Frequency: 1408000 (88.000000 MHz) +Video Standard = 0x00000000 +Modulator: + Name : FM Modulator + Capabilities : 62.5 Hz stereo rds + Frequency range : 76.0 MHz - 108.0 MHz + Subchannel modulation: stereo+rds + +User Controls + + mute (bool) : default=1 value=0 + +FM Radio Modulator Controls + + rds_signal_deviation (int) : min=0 max=90000 step=10 default=200 value=200 flags=slider + rds_program_id (int) : min=0 max=65535 step=1 default=0 value=0 + rds_program_type (int) : min=0 max=31 step=1 default=0 value=0 + rds_ps_name (str) : min=0 max=96 step=8 value='si4713 ' + rds_radio_text (str) : min=0 max=384 step=32 value='' + audio_limiter_feature_enabled (bool) : default=1 value=1 + audio_limiter_release_time (int) : min=250 max=102390 step=50 default=5010 value=5010 flags=slider + audio_limiter_deviation (int) : min=0 max=90000 step=10 default=66250 value=66250 flags=slider +audio_compression_feature_enabl (bool) : default=1 value=1 + audio_compression_gain (int) : min=0 max=20 step=1 default=15 value=15 flags=slider + audio_compression_threshold (int) : min=-40 max=0 step=1 default=-40 value=-40 flags=slider + audio_compression_attack_time (int) : min=0 max=5000 step=500 default=0 value=0 flags=slider + audio_compression_release_time (int) : min=100000 max=1000000 step=100000 default=1000000 value=1000000 flags=slider + pilot_tone_feature_enabled (bool) : default=1 value=1 + pilot_tone_deviation (int) : min=0 max=90000 step=10 default=6750 value=6750 flags=slider + pilot_tone_frequency (int) : min=0 max=19000 step=1 default=19000 value=19000 flags=slider + pre_emphasis_settings (menu) : min=0 max=2 default=1 value=1 + tune_power_level (int) : min=0 max=120 step=1 default=88 value=88 flags=slider + tune_antenna_capacitor (int) : min=0 max=191 step=1 default=0 value=110 flags=slider +/ # + +Here is a summary of them: + +* Pilot is an audible tone sent by the device. + +pilot_frequency - Configures the frequency of the stereo pilot tone. +pilot_deviation - Configures pilot tone frequency deviation level. +pilot_enabled - Enables or disables the pilot tone feature. + +* The si4713 device is capable of applying audio compression to the transmitted signal. + +acomp_enabled - Enables or disables the audio dynamic range control feature. +acomp_gain - Sets the gain for audio dynamic range control. +acomp_threshold - Sets the threshold level for audio dynamic range control. +acomp_attack_time - Sets the attack time for audio dynamic range control. +acomp_release_time - Sets the release time for audio dynamic range control. + +* Limiter setups audio deviation limiter feature. Once a over deviation occurs, +it is possible to adjust the front-end gain of the audio input and always +prevent over deviation. + +limiter_enabled - Enables or disables the limiter feature. +limiter_deviation - Configures audio frequency deviation level. +limiter_release_time - Sets the limiter release time. + +* Tuning power + +power_level - Sets the output power level for signal transmission. +antenna_capacitor - This selects the value of antenna tuning capacitor manually +or automatically if set to zero. + +* RDS related + +rds_ps_name - Sets the RDS ps name field for transmission. +rds_radio_text - Sets the RDS radio text for transmission. +rds_pi - Sets the RDS PI field for transmission. +rds_pty - Sets the RDS PTY field for transmission. + +* Region related + +preemphasis - sets the preemphasis to be applied for transmission. + +RNL +=== + +This device also has an interface to measure received noise level. To do that, you should +ioctl the device node. Here is an code of example: + +int main (int argc, char *argv[]) +{ + struct si4713_rnl rnl; + int fd = open("/dev/radio0", O_RDWR); + int rval; + + if (argc < 2) + return -EINVAL; + + if (fd < 0) + return fd; + + sscanf(argv[1], "%d", &rnl.frequency); + + rval = ioctl(fd, SI4713_IOC_MEASURE_RNL, &rnl); + if (rval < 0) + return rval; + + printf("received noise level: %d\n", rnl.rnl); + + close(fd); +} + +The struct si4713_rnl and SI4713_IOC_MEASURE_RNL are defined under +include/media/si4713.h. + +Stereo/Mono and RDS subchannels +=============================== + +The device can also be configured using the available sub channels for +transmission. To do that use S/G_MODULATOR ioctl and configure txsubchans properly. +Refer to v4l2-spec for proper use of this ioctl. + +Testing +======= +Testing is usually done with v4l2-ctl utility for managing FM tuner cards. +The tool can be found in v4l-dvb repository under v4l2-apps/util directory. + +Example for setting rds ps name: +# v4l2-ctl -d /dev/radio0 --set-ctrl=rds_ps_name="Dummy" + -- cgit v1.2.3-70-g09d2 From 5a5e1da579beb38fa8bf7d0a80cfa027cd7a2751 Mon Sep 17 00:00:00 2001 From: Vasiliy Temnikov Date: Wed, 26 Aug 2009 22:10:55 -0300 Subject: V4L/DVB (12574): support AverMedia Studio 505 Added support to AverMedia Studio 505 [dougsland@redhat.com: fixed rejects and removed the change to add dk as default secam variant] [mchehab@redhat.com: fix a few CodingStyle issues] Signed-off-by: Vasiliy Temnikov Signed-off-by: Andrew Morton Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 1 + drivers/media/video/saa7134/saa7134-cards.c | 43 +++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-input.c | 1 + drivers/media/video/saa7134/saa7134.h | 1 + 4 files changed, 46 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index dc0576afe5d..31d9f14d6c3 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -168,3 +168,4 @@ 167 -> Beholder BeholdTV 609 RDS [5ace:6092] 168 -> Beholder BeholdTV 609 RDS [5ace:6093] 169 -> Compro VideoMate S350/S300 [185b:c900] +170 -> AverMedia AverTV Studio 505 [1461:a115] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 1a47e4a09b0..fbc55616faf 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -1364,6 +1364,42 @@ struct saa7134_board saa7134_boards[] = { .amux = LINE1, }, }, + [SAA7134_BOARD_AVERMEDIA_STUDIO_505] = { + /* Vasiliy Temnikov */ + .name = "AverMedia AverTV Studio 505", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + }, [SAA7134_BOARD_UPMOST_PURPLE_TV] = { .name = "UPMOST PURPLE TV", .audio_clock = 0x00187de7, @@ -5398,6 +5434,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subdevice = 0x2115, .driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_305, },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xa115, + .driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_505, + }, { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7130, .subvendor = 0x1461, /* Avermedia Technologies Inc */ @@ -6508,6 +6550,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_KWORLD_VSTREAM_XPERT: case SAA7134_BOARD_KWORLD_XPERT: case SAA7134_BOARD_AVERMEDIA_STUDIO_305: + case SAA7134_BOARD_AVERMEDIA_STUDIO_505: case SAA7134_BOARD_AVERMEDIA_305: case SAA7134_BOARD_AVERMEDIA_STUDIO_307: case SAA7134_BOARD_AVERMEDIA_307: diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index bd0bfdea561..bfdecb953f9 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -445,6 +445,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_305: case SAA7134_BOARD_AVERMEDIA_307: case SAA7134_BOARD_AVERMEDIA_STUDIO_305: + case SAA7134_BOARD_AVERMEDIA_STUDIO_505: case SAA7134_BOARD_AVERMEDIA_STUDIO_307: case SAA7134_BOARD_AVERMEDIA_STUDIO_507: case SAA7134_BOARD_AVERMEDIA_STUDIO_507UA: diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index de9a7dd6508..7bba44688bf 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -293,6 +293,7 @@ struct saa7134_format { #define SAA7134_BOARD_BEHOLD_609RDS_MK3 167 #define SAA7134_BOARD_BEHOLD_609RDS_MK5 168 #define SAA7134_BOARD_VIDEOMATE_S350 169 +#define SAA7134_BOARD_AVERMEDIA_STUDIO_505 170 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 -- cgit v1.2.3-70-g09d2 From 2012c87f8346ebf322826c3de5126d917ed75281 Mon Sep 17 00:00:00 2001 From: Dmitri Belimov Date: Wed, 26 Aug 2009 01:01:12 -0300 Subject: V4L/DVB (12587): Add support BeholdTV X7 card Add support our new TV card based on xc5000 and saa7134. Analog TV works well. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 1 + drivers/media/video/saa7134/saa7134-cards.c | 64 +++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-input.c | 1 + drivers/media/video/saa7134/saa7134.h | 1 + 4 files changed, 67 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 31d9f14d6c3..cd0222d845d 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -169,3 +169,4 @@ 168 -> Beholder BeholdTV 609 RDS [5ace:6093] 169 -> Compro VideoMate S350/S300 [185b:c900] 170 -> AverMedia AverTV Studio 505 [1461:a115] +171 -> Beholder BeholdTV X7 [5ace:7595] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index fbc55616faf..a433a9b7f1e 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -32,6 +32,7 @@ #include #include "tea5767.h" #include "tda18271.h" +#include "xc5000.h" /* commly used strings */ static char name_mute[] = "mute"; @@ -5179,6 +5180,34 @@ struct saa7134_board saa7134_boards[] = { .amux = LINE1 } }, }, + [SAA7134_BOARD_BEHOLD_X7] = { + /* Beholder Intl. Ltd. Dmitry Belimov */ + .name = "Beholder BeholdTV X7", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_XC5000, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = { { + .name = name_tv, + .vmux = 2, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 9, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + }, + }, + }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -6298,6 +6327,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x185b, .subdevice = 0xc900, .driver_data = SAA7134_BOARD_VIDEOMATE_S350, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, /* Beholder Intl. Ltd. */ + .subdevice = 0x7595, + .driver_data = SAA7134_BOARD_BEHOLD_X7, }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, @@ -6384,6 +6419,32 @@ static int saa7134_xc2028_callback(struct saa7134_dev *dev, return -EINVAL; } +static int saa7134_xc5000_callback(struct saa7134_dev *dev, + int command, int arg) +{ + switch (dev->board) { + case SAA7134_BOARD_BEHOLD_X7: + if (command == XC5000_TUNER_RESET) { + /* Down and UP pheripherial RESET pin for reset all chips */ + saa_writeb(SAA7134_SPECIAL_MODE, 0x00); + msleep(10); + saa_writeb(SAA7134_SPECIAL_MODE, 0x01); + msleep(10); + } + break; + default: + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000); + saa_andorl(SAA7133_ANALOG_IO_SELECT >> 2, 0x02, 0x02); + saa_andorl(SAA7134_ANALOG_IN_CTRL1 >> 2, 0x81, 0x81); + saa_andorl(SAA7134_AUDIO_CLOCK0 >> 2, 0x03187de7, 0x03187de7); + saa_andorl(SAA7134_AUDIO_PLL_CTRL >> 2, 0x03, 0x03); + saa_andorl(SAA7134_AUDIO_CLOCKS_PER_FIELD0 >> 2, + 0x0001e000, 0x0001e000); + break; + } + return 0; +} static int saa7134_tda8290_827x_callback(struct saa7134_dev *dev, int command, int arg) @@ -6480,6 +6541,8 @@ int saa7134_tuner_callback(void *priv, int component, int command, int arg) return saa7134_tda8290_callback(dev, command, arg); case TUNER_XC2028: return saa7134_xc2028_callback(dev, command, arg); + case TUNER_XC5000: + return saa7134_xc5000_callback(dev, command, arg); } } else { printk(KERN_ERR "saa7134: Error - device struct undefined.\n"); @@ -6728,6 +6791,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_BEHOLD_M63: case SAA7134_BOARD_BEHOLD_M6_EXTRA: case SAA7134_BOARD_BEHOLD_H6: + case SAA7134_BOARD_BEHOLD_X7: dev->has_remote = SAA7134_REMOTE_I2C; break; case SAA7134_BOARD_AVERMEDIA_A169_B: diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index bfdecb953f9..355fd247c4b 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -765,6 +765,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev) case SAA7134_BOARD_BEHOLD_M63: case SAA7134_BOARD_BEHOLD_M6_EXTRA: case SAA7134_BOARD_BEHOLD_H6: + case SAA7134_BOARD_BEHOLD_X7: init_data.name = "BeholdTV"; init_data.get_key = get_key_beholdm6xx; init_data.ir_codes = ir_codes_behold; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 7bba44688bf..caefbf07d6f 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -294,6 +294,7 @@ struct saa7134_format { #define SAA7134_BOARD_BEHOLD_609RDS_MK5 168 #define SAA7134_BOARD_VIDEOMATE_S350 169 #define SAA7134_BOARD_AVERMEDIA_STUDIO_505 170 +#define SAA7134_BOARD_BEHOLD_X7 171 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 -- cgit v1.2.3-70-g09d2 From 23389b8852e32824186c76fa4d87f818268adca1 Mon Sep 17 00:00:00 2001 From: Eugene Yudin Date: Sat, 29 Aug 2009 09:32:11 -0300 Subject: V4L/DVB (12589): Add support for RoverMedia TV Link Pro FM This patch add support for RoverMedia TV Link Pro FM (LR138 REV:I) card based on saa7134. Signed-off-by: Eugene Yudin Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 1 + drivers/media/video/saa7134/saa7134-cards.c | 57 +++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-input.c | 1 + drivers/media/video/saa7134/saa7134.h | 1 + 4 files changed, 60 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index cd0222d845d..0ac4d254477 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -170,3 +170,4 @@ 169 -> Compro VideoMate S350/S300 [185b:c900] 170 -> AverMedia AverTV Studio 505 [1461:a115] 171 -> Beholder BeholdTV X7 [5ace:7595] +172 -> RoverMedia TV Link Pro FM [19d1:0138] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index a433a9b7f1e..1b29487fd25 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -266,6 +266,56 @@ struct saa7134_board saa7134_boards[] = { .gpio = 0x10000, }, }, + [SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM] = { + /* RoverMedia TV Link Pro FM (LR138 REV:I) */ + /* Eugene Yudin */ + .name = "RoverMedia TV Link Pro FM", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MFPE05 2 */ + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0xe000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .gpio = 0x8000, + .tv = 1, + }, { + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .gpio = 0x0000, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + .gpio = 0x4000, + }, { + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + .gpio = 0x4000, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x4000, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x2000, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x8000, + }, + }, [SAA7134_BOARD_EMPRESS] = { /* "Gert Vervoort" */ .name = "EMPRESS", @@ -6333,6 +6383,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x5ace, /* Beholder Intl. Ltd. */ .subdevice = 0x7595, .driver_data = SAA7134_BOARD_BEHOLD_X7, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x19d1, /* RoverMedia */ + .subdevice = 0x0138, /* LifeView FlyTV Prime30 OEM */ + .driver_data = SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM, }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, @@ -6663,6 +6719,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_REAL_ANGEL_220: case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG: case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS: + case SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM: dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_FLYDVBS_LR300: diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 355fd247c4b..65fb7b17b67 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -415,6 +415,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_FLYVIDEO3000: case SAA7134_BOARD_FLYTVPLATINUM_FM: case SAA7134_BOARD_FLYTVPLATINUM_MINI2: + case SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM: ir_codes = ir_codes_flyvideo; mask_keycode = 0xEC00000; mask_keydown = 0x0040000; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index caefbf07d6f..ac74903a5bd 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -295,6 +295,7 @@ struct saa7134_format { #define SAA7134_BOARD_VIDEOMATE_S350 169 #define SAA7134_BOARD_AVERMEDIA_STUDIO_505 170 #define SAA7134_BOARD_BEHOLD_X7 171 +#define SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM 172 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 -- cgit v1.2.3-70-g09d2 From 6d888a66be1c50c2f5193c53d6ea556e01dd60e3 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 30 Aug 2009 13:05:56 -0300 Subject: V4L/DVB (12591): em28xx: Add entry for GADMEI UTV330+ and related IR keymap [mchehab@redhat.com: Fix a few wrong IR keymaps] Signed-off-by: Shine Liu Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 1 + drivers/media/common/ir-keymaps.c | 44 +++++++++++++++++++++++++++++++ drivers/media/video/em28xx/em28xx-cards.c | 22 ++++++++++++++++ drivers/media/video/em28xx/em28xx.h | 1 + include/media/ir-common.h | 1 + 5 files changed, 69 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 66e5f829577..b37eff3c988 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -67,3 +67,4 @@ 69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313] 70 -> Evga inDtube (em2882) 71 -> Silvercrest Webcam 1.3mpix (em2820/em2840) + 72 -> Gadmei UTV330+ (em2861) diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index 0b8bfac1431..c93a5269f22 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -2826,3 +2826,47 @@ IR_KEYTAB_TYPE ir_codes_videomate_s350[IR_KEYTAB_SIZE] = { [0x20] = KEY_TEXT, }; EXPORT_SYMBOL_GPL(ir_codes_videomate_s350); + + +/* GADMEI UTV330+ RM008Z remote + Shine Liu + */ +IR_KEYTAB_TYPE ir_codes_gadmei_rm008z[IR_KEYTAB_SIZE] = { + [0x14] = KEY_POWER2, /* POWER OFF */ + [0x0c] = KEY_MUTE, /* MUTE */ + + [0x18] = KEY_TV, /* TV */ + [0x0e] = KEY_VIDEO, /* AV */ + [0x0b] = KEY_AUDIO, /* SV */ + [0x0f] = KEY_RADIO, /* FM */ + + [0x00] = KEY_1, + [0x01] = KEY_2, + [0x02] = KEY_3, + [0x03] = KEY_4, + [0x04] = KEY_5, + [0x05] = KEY_6, + [0x06] = KEY_7, + [0x07] = KEY_8, + [0x08] = KEY_9, + [0x09] = KEY_0, + [0x0a] = KEY_INFO, /* OSD */ + [0x1c] = KEY_BACKSPACE, /* LAST */ + + [0x0d] = KEY_PLAY, /* PLAY */ + [0x1e] = KEY_CAMERA, /* SNAPSHOT */ + [0x1a] = KEY_RECORD, /* RECORD */ + [0x17] = KEY_STOP, /* STOP */ + + [0x1f] = KEY_UP, /* UP */ + [0x44] = KEY_DOWN, /* DOWN */ + [0x46] = KEY_TAB, /* BACK */ + [0x4a] = KEY_ZOOM, /* FULLSECREEN */ + + [0x10] = KEY_VOLUMEUP, /* VOLUMEUP */ + [0x11] = KEY_VOLUMEDOWN, /* VOLUMEDOWN */ + [0x12] = KEY_CHANNELUP, /* CHANNELUP */ + [0x13] = KEY_CHANNELDOWN, /* CHANNELDOWN */ + [0x15] = KEY_ENTER, /* OK */ +}; +EXPORT_SYMBOL_GPL(ir_codes_gadmei_rm008z); diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 66c37768370..b184d482c49 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -558,6 +558,27 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_LINE_IN, } }, }, + [EM2861_BOARD_GADMEI_UTV330PLUS] = { + .name = "Gadmei UTV330+", + .tuner_type = TUNER_TNF_5335MF, + .tda9887_conf = TDA9887_PRESENT, + .ir_codes = ir_codes_gadmei_rm008z, + .decoder = EM28XX_SAA711X, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, [EM2860_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Cinergy A Hybrid XS", .valid = EM28XX_BOARD_NOT_VALIDATED, @@ -1676,6 +1697,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = { {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, + {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, }; /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */ diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index a2add61f7d5..23f34dd691e 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -108,6 +108,7 @@ #define EM2882_BOARD_KWORLD_ATSC_315U 69 #define EM2882_BOARD_EVGA_INDTUBE 70 #define EM2820_BOARD_SILVERCREST_WEBCAM 71 +#define EM2861_BOARD_GADMEI_UTV330PLUS 72 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 8a607db492a..74a7e55734f 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -165,6 +165,7 @@ extern IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_terratec_cinergy_xs[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_videomate_s350[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_gadmei_rm008z[IR_KEYTAB_SIZE]; #endif -- cgit v1.2.3-70-g09d2 From b5948bee1332eff719c074a760f99da9f02c7308 Mon Sep 17 00:00:00 2001 From: "Stephane Marguet (Stemp)" Date: Tue, 25 Aug 2009 04:14:04 -0300 Subject: V4L/DVB (12690): gspca - pac7311: Webcam 06f8:3009 added. Signed-off-by: Stephane Marguet (Stemp) Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac7311.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 76203a2213a..4686e84dd80 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -183,6 +183,7 @@ ov534 06f8:3002 Hercules Blog Webcam ov534 06f8:3003 Hercules Dualpix HD Weblog sonixj 06f8:3004 Hercules Classic Silver sonixj 06f8:3008 Hercules Deluxe Optical Glass +pac7311 06f8:3009 Hercules Classic Link spca508 0733:0110 ViewQuest VQ110 spca508 0130:0130 Clone Digital Webcam 11043 spca501 0733:0401 Intel Create and Share diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 0caf3c07573..052714484e8 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -1057,6 +1057,7 @@ static struct sd_desc sd_desc = { /* -- module initialisation -- */ static __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x06f8, 0x3009), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2600), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x2601), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x2603), .driver_info = SENSOR_PAC7311}, -- cgit v1.2.3-70-g09d2 From 95b696088c1cf152c3bb62560bbe3a441922d68b Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Thu, 10 Sep 2009 23:13:51 -0500 Subject: tracing/filters: add filter Documentation Documentation for event filters and formats. v2 changes: fix a few problems noticed by Randy Dunlap. Reviewed-by: Li Zefan Acked-by: Randy Dunlap Signed-off-by: Tom Zanussi LKML-Reference: <1252642431.8016.9.camel@tropicana> Signed-off-by: Steven Rostedt --- Documentation/trace/events.txt | 184 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 183 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt index 2bcc8d4dea2..6e5f35ebb9c 100644 --- a/Documentation/trace/events.txt +++ b/Documentation/trace/events.txt @@ -1,7 +1,7 @@ Event Tracing Documentation written by Theodore Ts'o - Updated by Li Zefan + Updated by Li Zefan and Tom Zanussi 1. Introduction =============== @@ -97,3 +97,185 @@ The format of this boot option is the same as described in section 2.1. See The example provided in samples/trace_events +4. Event formats +================ + +Each trace event has a 'format' file associated with it that contains +a description of each field in a logged event. This information can +be used to parse the binary trace stream, and is also the place to +find the field names that can be used in event filters (see section 5). + +It also displays the format string that will be used to print the +event in text mode, along with the event name and ID used for +profiling. + +Every event has a set of 'common' fields associated with it; these are +the fields prefixed with 'common_'. The other fields vary between +events and correspond to the fields defined in the TRACE_EVENT +definition for that event. + +Each field in the format has the form: + + field:field-type field-name; offset:N; size:N; + +where offset is the offset of the field in the trace record and size +is the size of the data item, in bytes. + +For example, here's the information displayed for the 'sched_wakeup' +event: + +# cat /debug/tracing/events/sched/sched_wakeup/format + +name: sched_wakeup +ID: 60 +format: + field:unsigned short common_type; offset:0; size:2; + field:unsigned char common_flags; offset:2; size:1; + field:unsigned char common_preempt_count; offset:3; size:1; + field:int common_pid; offset:4; size:4; + field:int common_tgid; offset:8; size:4; + + field:char comm[TASK_COMM_LEN]; offset:12; size:16; + field:pid_t pid; offset:28; size:4; + field:int prio; offset:32; size:4; + field:int success; offset:36; size:4; + field:int cpu; offset:40; size:4; + +print fmt: "task %s:%d [%d] success=%d [%03d]", REC->comm, REC->pid, + REC->prio, REC->success, REC->cpu + +This event contains 10 fields, the first 5 common and the remaining 5 +event-specific. All the fields for this event are numeric, except for +'comm' which is a string, a distinction important for event filtering. + +5. Event filtering +================== + +Trace events can be filtered in the kernel by associating boolean +'filter expressions' with them. As soon as an event is logged into +the trace buffer, its fields are checked against the filter expression +associated with that event type. An event with field values that +'match' the filter will appear in the trace output, and an event whose +values don't match will be discarded. An event with no filter +associated with it matches everything, and is the default when no +filter has been set for an event. + +5.1 Expression syntax +--------------------- + +A filter expression consists of one or more 'predicates' that can be +combined using the logical operators '&&' and '||'. A predicate is +simply a clause that compares the value of a field contained within a +logged event with a constant value and returns either 0 or 1 depending +on whether the field value matched (1) or didn't match (0): + + field-name relational-operator value + +Parentheses can be used to provide arbitrary logical groupings and +double-quotes can be used to prevent the shell from interpreting +operators as shell metacharacters. + +The field-names available for use in filters can be found in the +'format' files for trace events (see section 4). + +The relational-operators depend on the type of the field being tested: + +The operators available for numeric fields are: + +==, !=, <, <=, >, >= + +And for string fields they are: + +==, != + +Currently, only exact string matches are supported. + +Currently, the maximum number of predicates in a filter is 16. + +5.2 Setting filters +------------------- + +A filter for an individual event is set by writing a filter expression +to the 'filter' file for the given event. + +For example: + +# cd /debug/tracing/events/sched/sched_wakeup +# echo "common_preempt_count > 4" > filter + +A slightly more involved example: + +# cd /debug/tracing/events/sched/sched_signal_send +# echo "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter + +If there is an error in the expression, you'll get an 'Invalid +argument' error when setting it, and the erroneous string along with +an error message can be seen by looking at the filter e.g.: + +# cd /debug/tracing/events/sched/sched_signal_send +# echo "((sig >= 10 && sig < 15) || dsig == 17) && comm != bash" > filter +-bash: echo: write error: Invalid argument +# cat filter +((sig >= 10 && sig < 15) || dsig == 17) && comm != bash +^ +parse_error: Field not found + +Currently the caret ('^') for an error always appears at the beginning of +the filter string; the error message should still be useful though +even without more accurate position info. + +5.3 Clearing filters +-------------------- + +To clear the filter for an event, write a '0' to the event's filter +file. + +To clear the filters for all events in a subsystem, write a '0' to the +subsystem's filter file. + +5.3 Subsystem filters +--------------------- + +For convenience, filters for every event in a subsystem can be set or +cleared as a group by writing a filter expression into the filter file +at the root of the subsytem. Note however, that if a filter for any +event within the subsystem lacks a field specified in the subsystem +filter, or if the filter can't be applied for any other reason, the +filter for that event will retain its previous setting. This can +result in an unintended mixture of filters which could lead to +confusing (to the user who might think different filters are in +effect) trace output. Only filters that reference just the common +fields can be guaranteed to propagate successfully to all events. + +Here are a few subsystem filter examples that also illustrate the +above points: + +Clear the filters on all events in the sched subsytem: + +# cd /sys/kernel/debug/tracing/events/sched +# echo 0 > filter +# cat sched_switch/filter +none +# cat sched_wakeup/filter +none + +Set a filter using only common fields for all events in the sched +subsytem (all events end up with the same filter): + +# cd /sys/kernel/debug/tracing/events/sched +# echo common_pid == 0 > filter +# cat sched_switch/filter +common_pid == 0 +# cat sched_wakeup/filter +common_pid == 0 + +Attempt to set a filter using a non-common field for all events in the +sched subsytem (all events but those that have a prev_pid field retain +their old filters): + +# cd /sys/kernel/debug/tracing/events/sched +# echo prev_pid == 0 > filter +# cat sched_switch/filter +prev_pid == 0 +# cat sched_wakeup/filter +common_pid == 0 -- cgit v1.2.3-70-g09d2 From ea47689e74a1637fac4f5fc44890f3662c976849 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Sun, 6 Sep 2009 18:41:59 -0300 Subject: V4L/DVB (12720): em28xx-cards: Add vendor/product id for Kworld DVD Maker 2 Added Kworld DVD Maker 2 Thanks to C Western for reporting this board. Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 2 +- drivers/media/video/em28xx/em28xx-cards.c | 5 ++++- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index b37eff3c988..b13fcbd5d94 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -7,7 +7,7 @@ 6 -> Terratec Cinergy 200 USB (em2800) 7 -> Leadtek Winfast USB II (em2800) [0413:6023] 8 -> Kworld USB2800 (em2800) - 9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,2304:0207,2304:021a] + 9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,1b80:e304,2304:0207,2304:021a] 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500] 11 -> Terratec Hybrid XS (em2880) [0ccd:0042] 12 -> Kworld PVR TV 2800 RF (em2820/em2840) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ec4763f73b2..7e3c78239fa 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1037,7 +1037,8 @@ struct em28xx_board em28xx_boards[] = { } }, }, [EM2820_BOARD_PINNACLE_DVC_90] = { - .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker", + .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " + "/ Kworld DVD Maker 2", .tuner_type = TUNER_ABSENT, /* capture only board */ .decoder = EM28XX_SAA711X, .input = { { @@ -1618,6 +1619,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2870_BOARD_KWORLD_355U }, { USB_DEVICE(0x1b80, 0xe302), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ + { USB_DEVICE(0x1b80, 0xe304), + .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ { USB_DEVICE(0x0ccd, 0x0036), .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, { USB_DEVICE(0x0ccd, 0x004c), -- cgit v1.2.3-70-g09d2 From 555f386c98cc93890f48fdea098936755270304b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 14 Sep 2009 20:10:15 -0400 Subject: ftrace: document function and function graph implementation While implementing function tracer and function tracer graph support, I found the exact arch implementation details to be a bit lacking (and my x86 foo ain't great). So after pounding out support for the Blackfin arch, start documenting the requirements/details. Signed-off-by: Mike Frysinger LKML-Reference: <1252973415-21264-1-git-send-email-vapier@gentoo.org> Acked-by: Frederic Weisbecker Signed-off-by: Steven Rostedt --- Documentation/trace/ftrace-design.txt | 233 ++++++++++++++++++++++++++++++++++ Documentation/trace/ftrace.txt | 6 + kernel/trace/Kconfig | 16 ++- 3 files changed, 252 insertions(+), 3 deletions(-) create mode 100644 Documentation/trace/ftrace-design.txt (limited to 'Documentation') diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt new file mode 100644 index 00000000000..7003e10f10f --- /dev/null +++ b/Documentation/trace/ftrace-design.txt @@ -0,0 +1,233 @@ + function tracer guts + ==================== + +Introduction +------------ + +Here we will cover the architecture pieces that the common function tracing +code relies on for proper functioning. Things are broken down into increasing +complexity so that you can start simple and at least get basic functionality. + +Note that this focuses on architecture implementation details only. If you +want more explanation of a feature in terms of common code, review the common +ftrace.txt file. + + +Prerequisites +------------- + +Ftrace relies on these features being implemented: + STACKTRACE_SUPPORT - implement save_stack_trace() + TRACE_IRQFLAGS_SUPPORT - implement include/asm/irqflags.h + + +HAVE_FUNCTION_TRACER +-------------------- + +You will need to implement the mcount and the ftrace_stub functions. + +The exact mcount symbol name will depend on your toolchain. Some call it +"mcount", "_mcount", or even "__mcount". You can probably figure it out by +running something like: + $ echo 'main(){}' | gcc -x c -S -o - - -pg | grep mcount + call mcount +We'll make the assumption below that the symbol is "mcount" just to keep things +nice and simple in the examples. + +Keep in mind that the ABI that is in effect inside of the mcount function is +*highly* architecture/toolchain specific. We cannot help you in this regard, +sorry. Dig up some old documentation and/or find someone more familiar than +you to bang ideas off of. Typically, register usage (argument/scratch/etc...) +is a major issue at this point, especially in relation to the location of the +mcount call (before/after function prologue). You might also want to look at +how glibc has implemented the mcount function for your architecture. It might +be (semi-)relevant. + +The mcount function should check the function pointer ftrace_trace_function +to see if it is set to ftrace_stub. If it is, there is nothing for you to do, +so return immediately. If it isn't, then call that function in the same way +the mcount function normally calls __mcount_internal -- the first argument is +the "frompc" while the second argument is the "selfpc" (adjusted to remove the +size of the mcount call that is embedded in the function). + +For example, if the function foo() calls bar(), when the bar() function calls +mcount(), the arguments mcount() will pass to the tracer are: + "frompc" - the address bar() will use to return to foo() + "selfpc" - the address bar() (with _mcount() size adjustment) + +Also keep in mind that this mcount function will be called *a lot*, so +optimizing for the default case of no tracer will help the smooth running of +your system when tracing is disabled. So the start of the mcount function is +typically the bare min with checking things before returning. That also means +the code flow should usually kept linear (i.e. no branching in the nop case). +This is of course an optimization and not a hard requirement. + +Here is some pseudo code that should help (these functions should actually be +implemented in assembly): + +void ftrace_stub(void) +{ + return; +} + +void mcount(void) +{ + /* save any bare state needed in order to do initial checking */ + + extern void (*ftrace_trace_function)(unsigned long, unsigned long); + if (ftrace_trace_function != ftrace_stub) + goto do_trace; + + /* restore any bare state */ + + return; + +do_trace: + + /* save all state needed by the ABI (see paragraph above) */ + + unsigned long frompc = ...; + unsigned long selfpc = - MCOUNT_INSN_SIZE; + ftrace_trace_function(frompc, selfpc); + + /* restore all state needed by the ABI */ +} + +Don't forget to export mcount for modules ! +extern void mcount(void); +EXPORT_SYMBOL(mcount); + + +HAVE_FUNCTION_TRACE_MCOUNT_TEST +------------------------------- + +This is an optional optimization for the normal case when tracing is turned off +in the system. If you do not enable this Kconfig option, the common ftrace +code will take care of doing the checking for you. + +To support this feature, you only need to check the function_trace_stop +variable in the mcount function. If it is non-zero, there is no tracing to be +done at all, so you can return. + +This additional pseudo code would simply be: +void mcount(void) +{ + /* save any bare state needed in order to do initial checking */ + ++ if (function_trace_stop) ++ return; + + extern void (*ftrace_trace_function)(unsigned long, unsigned long); + if (ftrace_trace_function != ftrace_stub) +... + + +HAVE_FUNCTION_GRAPH_TRACER +-------------------------- + +Deep breath ... time to do some real work. Here you will need to update the +mcount function to check ftrace graph function pointers, as well as implement +some functions to save (hijack) and restore the return address. + +The mcount function should check the function pointers ftrace_graph_return +(compare to ftrace_stub) and ftrace_graph_entry (compare to +ftrace_graph_entry_stub). If either of those are not set to the relevant stub +function, call the arch-specific function ftrace_graph_caller which in turn +calls the arch-specific function prepare_ftrace_return. Neither of these +function names are strictly required, but you should use them anyways to stay +consistent across the architecture ports -- easier to compare & contrast +things. + +The arguments to prepare_ftrace_return are slightly different than what are +passed to ftrace_trace_function. The second argument "selfpc" is the same, +but the first argument should be a pointer to the "frompc". Typically this is +located on the stack. This allows the function to hijack the return address +temporarily to have it point to the arch-specific function return_to_handler. +That function will simply call the common ftrace_return_to_handler function and +that will return the original return address with which, you can return to the +original call site. + +Here is the updated mcount pseudo code: +void mcount(void) +{ +... + if (ftrace_trace_function != ftrace_stub) + goto do_trace; + ++#ifdef CONFIG_FUNCTION_GRAPH_TRACER ++ extern void (*ftrace_graph_return)(...); ++ extern void (*ftrace_graph_entry)(...); ++ if (ftrace_graph_return != ftrace_stub || ++ ftrace_graph_entry != ftrace_graph_entry_stub) ++ ftrace_graph_caller(); ++#endif + + /* restore any bare state */ +... + +Here is the pseudo code for the new ftrace_graph_caller assembly function: +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +void ftrace_graph_caller(void) +{ + /* save all state needed by the ABI */ + + unsigned long *frompc = &...; + unsigned long selfpc = - MCOUNT_INSN_SIZE; + prepare_ftrace_return(frompc, selfpc); + + /* restore all state needed by the ABI */ +} +#endif + +For information on how to implement prepare_ftrace_return(), simply look at +the x86 version. The only architecture-specific piece in it is the setup of +the fault recovery table (the asm(...) code). The rest should be the same +across architectures. + +Here is the pseudo code for the new return_to_handler assembly function. Note +that the ABI that applies here is different from what applies to the mcount +code. Since you are returning from a function (after the epilogue), you might +be able to skimp on things saved/restored (usually just registers used to pass +return values). + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +void return_to_handler(void) +{ + /* save all state needed by the ABI (see paragraph above) */ + + void (*original_return_point)(void) = ftrace_return_to_handler(); + + /* restore all state needed by the ABI */ + + /* this is usually either a return or a jump */ + original_return_point(); +} +#endif + + +HAVE_FTRACE_NMI_ENTER +--------------------- + +If you can't trace NMI functions, then skip this option. + +
+ + +HAVE_FTRACE_SYSCALLS +--------------------- + +
+ + +HAVE_FTRACE_MCOUNT_RECORD +------------------------- + +See scripts/recordmcount.pl for more info. + +
+ + +HAVE_DYNAMIC_FTRACE +--------------------- + +
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index 355d0f1f8c5..1b6292bbdd6 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -26,6 +26,12 @@ disabled, and more (ftrace allows for tracer plugins, which means that the list of tracers can always grow). +Implementation Details +---------------------- + +See ftrace-design.txt for details for arch porters and such. + + The File System --------------- diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index aa002cef924..e7163460440 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -11,12 +11,18 @@ config NOP_TRACER config HAVE_FTRACE_NMI_ENTER bool + help + See Documentation/trace/ftrace-implementation.txt config HAVE_FUNCTION_TRACER bool + help + See Documentation/trace/ftrace-implementation.txt config HAVE_FUNCTION_GRAPH_TRACER bool + help + See Documentation/trace/ftrace-implementation.txt config HAVE_FUNCTION_GRAPH_FP_TEST bool @@ -28,21 +34,25 @@ config HAVE_FUNCTION_GRAPH_FP_TEST config HAVE_FUNCTION_TRACE_MCOUNT_TEST bool help - This gets selected when the arch tests the function_trace_stop - variable at the mcount call site. Otherwise, this variable - is tested by the called function. + See Documentation/trace/ftrace-implementation.txt config HAVE_DYNAMIC_FTRACE bool + help + See Documentation/trace/ftrace-implementation.txt config HAVE_FTRACE_MCOUNT_RECORD bool + help + See Documentation/trace/ftrace-implementation.txt config HAVE_HW_BRANCH_TRACER bool config HAVE_SYSCALL_TRACEPOINTS bool + help + See Documentation/trace/ftrace-implementation.txt config TRACER_MAX_TRACE bool -- cgit v1.2.3-70-g09d2 From 1915fb70fa23230894cd35d98fcac5a168ec5c23 Mon Sep 17 00:00:00 2001 From: Andre Prendel Date: Tue, 15 Sep 2009 17:18:12 +0200 Subject: hwmon: (tmp421) Add documentation Add documentation for the tmp421 driver. Signed-off-by: Andre Prendel Acked-by: Hans de Goede Signed-off-by: Jean Delvare --- Documentation/hwmon/tmp421 | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/hwmon/tmp421 (limited to 'Documentation') diff --git a/Documentation/hwmon/tmp421 b/Documentation/hwmon/tmp421 new file mode 100644 index 00000000000..0cf07f82474 --- /dev/null +++ b/Documentation/hwmon/tmp421 @@ -0,0 +1,36 @@ +Kernel driver tmp421 +==================== + +Supported chips: + * Texas Instruments TMP421 + Prefix: 'tmp421' + Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html + * Texas Instruments TMP422 + Prefix: 'tmp422' + Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html + * Texas Instruments TMP423 + Prefix: 'tmp423' + Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html + +Authors: + Andre Prendel + +Description +----------- + +This driver implements support for Texas Instruments TMP421, TMP422 +and TMP423 temperature sensor chips. These chips implement one local +and up to one (TMP421), up to two (TMP422) or up to three (TMP423) +remote sensors. Temperature is measured in degrees Celsius. The chips +are wired over I2C/SMBus and specified over a temperature range of -40 +to +125 degrees Celsius. Resolution for both the local and remote +channels is 0.0625 degree C. + +The chips support only temperature measurement. The driver exports +the temperature values via the following sysfs files: + +temp[1-4]_input +temp[2-4]_fault -- cgit v1.2.3-70-g09d2 From afc31875fa5774dbc117f8c62034d77390156edc Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 15 Sep 2009 17:18:14 +0200 Subject: hwmon: (pcf8591) Documentation clean-ups Clean up the pcf8591 driver documentation: * The PCF8591 chip is now an NXP product. * Fix a sysfs path. * Fix the name of sysfs attributes. * And a few other random fixes. Signed-off-by: Jean Delvare Cc: Aurelien Jarno --- Documentation/hwmon/pcf8591 | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/pcf8591 b/Documentation/hwmon/pcf8591 index 5628fcf4207..e76a7892f68 100644 --- a/Documentation/hwmon/pcf8591 +++ b/Documentation/hwmon/pcf8591 @@ -2,11 +2,11 @@ Kernel driver pcf8591 ===================== Supported chips: - * Philips PCF8591 + * Philips/NXP PCF8591 Prefix: 'pcf8591' Addresses scanned: I2C 0x48 - 0x4f - Datasheet: Publicly available at the Philips Semiconductor website - http://www.semiconductors.philips.com/pip/PCF8591P.html + Datasheet: Publicly available at the NXP website + http://www.nxp.com/pip/PCF8591_6.html Authors: Aurelien Jarno @@ -16,9 +16,10 @@ Authors: Description ----------- + The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one -analog output) for the I2C bus produced by Philips Semiconductors. It -is designed to provide a byte I2C interface to up to 4 separate devices. +analog output) for the I2C bus produced by Philips Semiconductors (now NXP). +It is designed to provide a byte I2C interface to up to 4 separate devices. The PCF8591 has 4 analog inputs programmable as single-ended or differential inputs : @@ -58,8 +59,8 @@ Accessing PCF8591 via /sys interface ------------------------------------- ! Be careful ! -The PCF8591 is plainly impossible to detect ! Stupid chip. -So every chip with address in the interval [48..4f] is +The PCF8591 is plainly impossible to detect! Stupid chip. +So every chip with address in the interval [0x48..0x4f] is detected as PCF8591. If you have other chips in this address range, the workaround is to load this module after the one for your others chips. @@ -67,19 +68,20 @@ for your others chips. On detection (i.e. insmod, modprobe et al.), directories are being created for each detected PCF8591: -/sys/bus/devices/<0>-<1>/ +/sys/bus/i2c/devices/<0>-<1>/ where <0> is the bus the chip was detected on (e. g. i2c-0) and <1> the chip address ([48..4f]) Inside these directories, there are such files: -in0, in1, in2, in3, out0_enable, out0_output, name +in0_input, in1_input, in2_input, in3_input, out0_enable, out0_output, name Name contains chip name. -The in0, in1, in2 and in3 files are RO. Reading gives the value of the -corresponding channel. Depending on the current analog inputs configuration, -files in2 and/or in3 do not exist. Values range are from 0 to 255 for single -ended inputs and -128 to +127 for differential inputs (8-bit ADC). +The in0_input, in1_input, in2_input and in3_input files are RO. Reading gives +the value of the corresponding channel. Depending on the current analog inputs +configuration, files in2_input and in3_input may not exist. Values range +from 0 to 255 for single ended inputs and -128 to +127 for differential inputs +(8-bit ADC). The out0_enable file is RW. Reading gives "1" for analog output enabled and "0" for analog output disabled. Writing accepts "0" and "1" accordingly. -- cgit v1.2.3-70-g09d2 From 2f82af08fcc7dc01a7e98a49a5995a77e32a2925 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 14 Sep 2009 03:25:28 -0400 Subject: Nicolas Pitre has a new email address Due to problems at cam.org, my nico@cam.org email address is no longer valid. FRom now on, nico@fluxnic.net should be used instead. Signed-off-by: Nicolas Pitre Signed-off-by: Linus Torvalds --- CREDITS | 2 +- Documentation/arm/SA1100/ADSBitsy | 2 +- Documentation/arm/SA1100/Assabet | 2 +- Documentation/arm/SA1100/Brutus | 2 +- Documentation/arm/SA1100/GraphicsClient | 4 ++-- Documentation/arm/SA1100/GraphicsMaster | 4 ++-- Documentation/arm/SA1100/Victor | 2 +- MAINTAINERS | 4 ++-- arch/arm/boot/compressed/head-sa1100.S | 2 +- arch/arm/lib/lib1funcs.S | 2 +- arch/arm/lib/sha1.S | 2 +- arch/arm/mach-sa1100/include/mach/assabet.h | 2 +- arch/arm/mach-sa1100/include/mach/hardware.h | 2 +- arch/arm/mach-sa1100/include/mach/memory.h | 2 +- arch/arm/mach-sa1100/include/mach/neponset.h | 2 +- arch/arm/mach-sa1100/include/mach/system.h | 2 +- arch/arm/mach-sa1100/include/mach/uncompress.h | 2 +- arch/arm/mach-sa1100/pm.c | 2 +- arch/arm/mach-sa1100/time.c | 2 +- arch/arm/mm/proc-xscale.S | 2 +- arch/arm/plat-iop/setup.c | 2 +- arch/arm/plat-omap/include/mach/system.h | 2 +- drivers/input/keyboard/pxa27x_keypad.c | 2 +- drivers/mtd/chips/cfi_cmdset_0001.c | 2 +- drivers/mtd/chips/cfi_cmdset_0020.c | 2 +- drivers/mtd/maps/bfin-async-flash.c | 2 +- drivers/mtd/maps/ceiva.c | 2 +- drivers/mtd/maps/dc21285.c | 4 ++-- drivers/mtd/maps/ipaq-flash.c | 2 +- drivers/mtd/maps/pxa2xx-flash.c | 2 +- drivers/mtd/maps/sa1100-flash.c | 2 +- drivers/mtd/mtdblock.c | 4 ++-- drivers/mtd/mtdpart.c | 2 +- drivers/net/smc91x.c | 4 ++-- drivers/net/smc91x.h | 2 +- drivers/rtc/rtc-sa1100.c | 2 +- drivers/video/sa1100fb.c | 2 +- include/linux/mtd/partitions.h | 2 +- lib/inflate.c | 2 +- 39 files changed, 45 insertions(+), 45 deletions(-) (limited to 'Documentation') diff --git a/CREDITS b/CREDITS index 1a41bf4addd..72b48786978 100644 --- a/CREDITS +++ b/CREDITS @@ -2800,7 +2800,7 @@ D: Starter of Linux1394 effort S: ask per mail for current address N: Nicolas Pitre -E: nico@cam.org +E: nico@fluxnic.net D: StrongARM SA1100 support integrator & hacker D: Xscale PXA architecture D: unified SMC 91C9x/91C11x ethernet driver (smc91x) diff --git a/Documentation/arm/SA1100/ADSBitsy b/Documentation/arm/SA1100/ADSBitsy index ab47c383390..7197a9e958e 100644 --- a/Documentation/arm/SA1100/ADSBitsy +++ b/Documentation/arm/SA1100/ADSBitsy @@ -40,4 +40,4 @@ Notes: mode, the timing is off so the image is corrupted. This will be fixed soon. -Any contribution can be sent to nico@cam.org and will be greatly welcome! +Any contribution can be sent to nico@fluxnic.net and will be greatly welcome! diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/SA1100/Assabet index 78bc1c1b04e..91f7ce7ba42 100644 --- a/Documentation/arm/SA1100/Assabet +++ b/Documentation/arm/SA1100/Assabet @@ -240,7 +240,7 @@ Then, rebooting the Assabet is just a matter of waiting for the login prompt. Nicolas Pitre -nico@cam.org +nico@fluxnic.net June 12, 2001 diff --git a/Documentation/arm/SA1100/Brutus b/Documentation/arm/SA1100/Brutus index 2254c8f0b32..b1cfd405dcc 100644 --- a/Documentation/arm/SA1100/Brutus +++ b/Documentation/arm/SA1100/Brutus @@ -60,7 +60,7 @@ little modifications. Any contribution is welcome. -Please send patches to nico@cam.org +Please send patches to nico@fluxnic.net Have Fun ! diff --git a/Documentation/arm/SA1100/GraphicsClient b/Documentation/arm/SA1100/GraphicsClient index 8fa7e8027ff..6c9c4f5a36e 100644 --- a/Documentation/arm/SA1100/GraphicsClient +++ b/Documentation/arm/SA1100/GraphicsClient @@ -4,7 +4,7 @@ For more details, contact Applied Data Systems or see http://www.applieddata.net/products.html The original Linux support for this product has been provided by -Nicolas Pitre . Continued development work by +Nicolas Pitre . Continued development work by Woojung Huh It's currently possible to mount a root filesystem via NFS providing a @@ -94,5 +94,5 @@ Notes: mode, the timing is off so the image is corrupted. This will be fixed soon. -Any contribution can be sent to nico@cam.org and will be greatly welcome! +Any contribution can be sent to nico@fluxnic.net and will be greatly welcome! diff --git a/Documentation/arm/SA1100/GraphicsMaster b/Documentation/arm/SA1100/GraphicsMaster index dd28745ac52..ee7c6595f23 100644 --- a/Documentation/arm/SA1100/GraphicsMaster +++ b/Documentation/arm/SA1100/GraphicsMaster @@ -4,7 +4,7 @@ For more details, contact Applied Data Systems or see http://www.applieddata.net/products.html The original Linux support for this product has been provided by -Nicolas Pitre . Continued development work by +Nicolas Pitre . Continued development work by Woojung Huh Use 'make graphicsmaster_config' before any 'make config'. @@ -50,4 +50,4 @@ Notes: mode, the timing is off so the image is corrupted. This will be fixed soon. -Any contribution can be sent to nico@cam.org and will be greatly welcome! +Any contribution can be sent to nico@fluxnic.net and will be greatly welcome! diff --git a/Documentation/arm/SA1100/Victor b/Documentation/arm/SA1100/Victor index 01e81fc4946..f938a29fdc2 100644 --- a/Documentation/arm/SA1100/Victor +++ b/Documentation/arm/SA1100/Victor @@ -9,7 +9,7 @@ Of course Victor is using Linux as its main operating system. The Victor implementation for Linux is maintained by Nicolas Pitre: nico@visuaide.com - nico@cam.org + nico@fluxnic.net For any comments, please feel free to contact me through the above addresses. diff --git a/MAINTAINERS b/MAINTAINERS index 837b5985ac4..64b9e447545 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3317,7 +3317,7 @@ S: Supported F: drivers/net/wireless/mwl8k.c MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER -M: Nicolas Pitre +M: Nicolas Pitre S: Maintained MARVELL YUKON / SYSKONNECT DRIVER @@ -4689,7 +4689,7 @@ F: include/linux/sl?b*.h F: mm/sl?b.c SMC91x ETHERNET DRIVER -M: Nicolas Pitre +M: Nicolas Pitre S: Maintained F: drivers/net/smc91x.* diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S index 4c8c0e46027..6179d94dd5c 100644 --- a/arch/arm/boot/compressed/head-sa1100.S +++ b/arch/arm/boot/compressed/head-sa1100.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/boot/compressed/head-sa1100.S * - * Copyright (C) 1999 Nicolas Pitre + * Copyright (C) 1999 Nicolas Pitre * * SA1100 specific tweaks. This is merged into head.S by the linker. * diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index 67964bcfc85..6dc06487f3c 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/lib/lib1funcs.S: Optimized ARM division routines * - * Author: Nicolas Pitre + * Author: Nicolas Pitre * - contributed to gcc-3.4 on Sep 30, 2003 * - adapted for the Linux kernel on Oct 2, 2003 */ diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S index 09b548cac1a..eb0edb80d7b 100644 --- a/arch/arm/lib/sha1.S +++ b/arch/arm/lib/sha1.S @@ -3,7 +3,7 @@ * * SHA transform optimized for ARM * - * Copyright: (C) 2005 by Nicolas Pitre + * Copyright: (C) 2005 by Nicolas Pitre * Created: September 17, 2005 * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h index 3959b20d5d1..28c2cf50c25 100644 --- a/arch/arm/mach-sa1100/include/mach/assabet.h +++ b/arch/arm/mach-sa1100/include/mach/assabet.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/assabet.h * - * Created 2000/06/05 by Nicolas Pitre + * Created 2000/06/05 by Nicolas Pitre * * This file contains the hardware specific definitions for Assabet * Only include this file from SA1100-specific files. diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h index 60711822b12..99f5856d8de 100644 --- a/arch/arm/mach-sa1100/include/mach/hardware.h +++ b/arch/arm/mach-sa1100/include/mach/hardware.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/hardware.h * - * Copyright (C) 1998 Nicolas Pitre + * Copyright (C) 1998 Nicolas Pitre * * This file contains the hardware definitions for SA1100 architecture * diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h index e9f8eed900f..d5277f9bee7 100644 --- a/arch/arm/mach-sa1100/include/mach/memory.h +++ b/arch/arm/mach-sa1100/include/mach/memory.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/memory.h * - * Copyright (C) 1999-2000 Nicolas Pitre + * Copyright (C) 1999-2000 Nicolas Pitre */ #ifndef __ASM_ARCH_MEMORY_H diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h index d3f044f92c0..ffe2bc45eed 100644 --- a/arch/arm/mach-sa1100/include/mach/neponset.h +++ b/arch/arm/mach-sa1100/include/mach/neponset.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/neponset.h * - * Created 2000/06/05 by Nicolas Pitre + * Created 2000/06/05 by Nicolas Pitre * * This file contains the hardware specific definitions for Assabet * Only include this file from SA1100-specific files. diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h index 942b153e251..ba9da9f7f18 100644 --- a/arch/arm/mach-sa1100/include/mach/system.h +++ b/arch/arm/mach-sa1100/include/mach/system.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/system.h * - * Copyright (c) 1999 Nicolas Pitre + * Copyright (c) 1999 Nicolas Pitre */ #include diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h index 714160b03d7..6cb39ddde65 100644 --- a/arch/arm/mach-sa1100/include/mach/uncompress.h +++ b/arch/arm/mach-sa1100/include/mach/uncompress.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/uncompress.h * - * (C) 1999 Nicolas Pitre + * (C) 1999 Nicolas Pitre * * Reorganised to be machine independent. */ diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index 111cce67ad2..c83fdc80edf 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -15,7 +15,7 @@ * Save more value for the resume function! Support * Bitsy/Assabet/Freebird board * - * 2001-08-29: Nicolas Pitre + * 2001-08-29: Nicolas Pitre * Cleaned up, pushed platform dependent stuff * in the platform specific files. * diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 711c0295c66..95d92e8e56a 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -4,7 +4,7 @@ * Copyright (C) 1998 Deborah Wallach. * Twiddles (C) 1999 Hugo Fiennes * - * 2000/03/29 (C) Nicolas Pitre + * 2000/03/29 (C) Nicolas Pitre * Rewritten: big cleanup, much simpler, better HZ accuracy. * */ diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 0cce37b9393..423394260bc 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -17,7 +17,7 @@ * * 2001 Sep 08: * Completely revisited, many important fixes - * Nicolas Pitre + * Nicolas Pitre */ #include diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c index 9e573e78176..bade586fed0 100644 --- a/arch/arm/plat-iop/setup.c +++ b/arch/arm/plat-iop/setup.c @@ -1,7 +1,7 @@ /* * arch/arm/plat-iop/setup.c * - * Author: Nicolas Pitre + * Author: Nicolas Pitre * Copyright (C) 2001 MontaVista Software, Inc. * Copyright (C) 2004 Intel Corporation. * diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h index 1060e345423..ed8ec747726 100644 --- a/arch/arm/plat-omap/include/mach/system.h +++ b/arch/arm/plat-omap/include/mach/system.h @@ -1,6 +1,6 @@ /* * Copied from arch/arm/mach-sa1100/include/mach/system.h - * Copyright (c) 1999 Nicolas Pitre + * Copyright (c) 1999 Nicolas Pitre */ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 76f9668221a..79cd3e9fdf2 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -8,7 +8,7 @@ * * Based on a previous implementations by Kevin O'Connor * and Alex Osborne and - * on some suggestions by Nicolas Pitre . + * on some suggestions by Nicolas Pitre . * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 8664feebc93..e7563a9872d 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -5,7 +5,7 @@ * (C) 2000 Red Hat. GPL'd * * - * 10/10/2000 Nicolas Pitre + * 10/10/2000 Nicolas Pitre * - completely revamped method functions so they are aware and * independent of the flash geometry (buswidth, interleave, etc.) * - scalability vs code size is completely set at compile-time diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c index 6c740f346f9..0667a671525 100644 --- a/drivers/mtd/chips/cfi_cmdset_0020.c +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -4,7 +4,7 @@ * * (C) 2000 Red Hat. GPL'd * - * 10/10/2000 Nicolas Pitre + * 10/10/2000 Nicolas Pitre * - completely revamped method functions so they are aware and * independent of the flash geometry (buswidth, interleave, etc.) * - scalability vs code size is completely set at compile-time diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c index 365c77b1b87..a7c808b577d 100644 --- a/drivers/mtd/maps/bfin-async-flash.c +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -6,7 +6,7 @@ * for example. All board-specific configuration goes in your * board resources file. * - * Copyright 2000 Nicolas Pitre + * Copyright 2000 Nicolas Pitre * Copyright 2005-2008 Analog Devices Inc. * * Enter bugs at http://blackfin.uclinux.org/ diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c index 60e68bde0fe..d41f34766e5 100644 --- a/drivers/mtd/maps/ceiva.c +++ b/drivers/mtd/maps/ceiva.c @@ -9,7 +9,7 @@ * Based on: sa1100-flash.c, which has the following copyright: * Flash memory access on SA11x0 based devices * - * (C) 2000 Nicolas Pitre + * (C) 2000 Nicolas Pitre * */ diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c index 42969fe051b..b3cb3a18380 100644 --- a/drivers/mtd/maps/dc21285.c +++ b/drivers/mtd/maps/dc21285.c @@ -1,7 +1,7 @@ /* * MTD map driver for flash on the DC21285 (the StrongARM-110 companion chip) * - * (C) 2000 Nicolas Pitre + * (C) 2000 Nicolas Pitre * * This code is GPL */ @@ -249,5 +249,5 @@ module_exit(cleanup_dc21285); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Nicolas Pitre "); +MODULE_AUTHOR("Nicolas Pitre "); MODULE_DESCRIPTION("MTD map driver for DC21285 boards"); diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c index 748c85f635f..76708e796b7 100644 --- a/drivers/mtd/maps/ipaq-flash.c +++ b/drivers/mtd/maps/ipaq-flash.c @@ -1,7 +1,7 @@ /* * Flash memory access on iPAQ Handhelds (either SA1100 or PXA250 based) * - * (C) 2000 Nicolas Pitre + * (C) 2000 Nicolas Pitre * (C) 2002 Hewlett-Packard Company * (C) 2003 Christian Pellegrin , : concatenation of multiple flashes */ diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 643aa06b599..74fa075c838 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -175,5 +175,5 @@ module_init(init_pxa2xx_flash); module_exit(cleanup_pxa2xx_flash); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Nicolas Pitre "); +MODULE_AUTHOR("Nicolas Pitre "); MODULE_DESCRIPTION("MTD map driver for Intel XScale PXA2xx"); diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index c6210f5118d..fdb97f3d30e 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -1,7 +1,7 @@ /* * Flash memory access on SA11x0 based devices * - * (C) 2000 Nicolas Pitre + * (C) 2000 Nicolas Pitre */ #include #include diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index 77db5ce24d9..2d70295a5fa 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -1,7 +1,7 @@ /* * Direct MTD block device access * - * (C) 2000-2003 Nicolas Pitre + * (C) 2000-2003 Nicolas Pitre * (C) 1999-2003 David Woodhouse */ @@ -403,5 +403,5 @@ module_exit(cleanup_mtdblock); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Nicolas Pitre et al."); +MODULE_AUTHOR("Nicolas Pitre et al."); MODULE_DESCRIPTION("Caching read/erase/writeback block device emulation access to MTD devices"); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 349fcbe5cc0..742504ea96f 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -1,7 +1,7 @@ /* * Simple MTD partitioning layer * - * (C) 2000 Nicolas Pitre + * (C) 2000 Nicolas Pitre * * This code is GPL * diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 61be6d7680f..05c91ee6921 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -35,7 +35,7 @@ * * contributors: * Daris A Nevil - * Nicolas Pitre + * Nicolas Pitre * Russell King * * History: @@ -58,7 +58,7 @@ * 22/09/04 Nicolas Pitre big update (see commit log for details) */ static const char version[] = - "smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre \n"; + "smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre \n"; /* Debugging level */ #ifndef SMC_DEBUG diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 57a159fac99..784b631cfa3 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -28,7 +28,7 @@ . Authors . Erik Stahlman . Daris A Nevil - . Nicolas Pitre + . Nicolas Pitre . ---------------------------------------------------------------------------*/ #ifndef _SMC91X_H_ diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 4f247e4dd3f..021b2928f0b 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -9,7 +9,7 @@ * * Modifications from: * CIH - * Nicolas Pitre + * Nicolas Pitre * Andrew Christian * * Converted to the RTC subsystem and Driver Model diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 10ddad8e17d..cdaa873a605 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -66,7 +66,7 @@ * - FrameBuffer memory is now allocated at run-time when the * driver is initialized. * - * 2000/04/10: Nicolas Pitre + * 2000/04/10: Nicolas Pitre * - Big cleanup for dynamic selection of machine type at run time. * * 2000/07/19: Jamey Hicks diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index b70313d33ff..274b6196091 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -1,7 +1,7 @@ /* * MTD partitioning layer definitions * - * (C) 2000 Nicolas Pitre + * (C) 2000 Nicolas Pitre * * This code is GPL */ diff --git a/lib/inflate.c b/lib/inflate.c index 1a8e8a97812..d10255973a9 100644 --- a/lib/inflate.c +++ b/lib/inflate.c @@ -7,7 +7,7 @@ * Adapted for booting Linux by Hannu Savolainen 1993 * based on gzip-1.0.3 * - * Nicolas Pitre , 1999/04/14 : + * Nicolas Pitre , 1999/04/14 : * Little mods for all variable to reside either into rodata or bss segments * by marking constant variables with 'const' and initializing all the others * at run-time only. This allows for the kernel uncompressor to run -- cgit v1.2.3-70-g09d2 From ccb86a6907c9ba7b5be5f521362fc308e80bed34 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 20 Jul 2009 10:29:34 +0300 Subject: uio: add generic driver for PCI 2.3 devices This adds a generic uio driver that can bind to any PCI device. First user will be virtualization where a qemu userspace process needs to give guest OS access to the device. Interrupts are handled using the Interrupt Disable bit in the PCI command register and Interrupt Status bit in the PCI status register. All devices compliant to PCI 2.3 (circa 2002) and all compliant PCI Express devices should support these bits. Driver detects this support, and won't bind to devices which do not support the Interrupt Disable Bit in the command register. It's expected that more features of interest to virtualization will be added to this driver in the future. Possibilities are: mmap for device resources, MSI/MSI-X, eventfd (to interface with kvm), iommu. Signed-off-by: Michael S. Tsirkin Acked-by: Chris Wright Signed-off-by: Hans J. Koch Acked-by: Jesse Barnes Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/uio-howto.tmpl | 163 +++++++++++++++++++++++++++ MAINTAINERS | 7 ++ drivers/uio/Kconfig | 10 ++ drivers/uio/Makefile | 1 + drivers/uio/uio_pci_generic.c | 207 +++++++++++++++++++++++++++++++++++ include/linux/pci_regs.h | 1 + 6 files changed, 389 insertions(+) create mode 100644 drivers/uio/uio_pci_generic.c (limited to 'Documentation') diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index 8f6e3b2403c..4d4ce0e61e4 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -25,6 +25,10 @@ 2006-2008 Hans-Jürgen Koch. + + 2009 + Red Hat Inc, Michael S. Tsirkin (mst@redhat.com) + @@ -41,6 +45,13 @@ GPL version 2. + + 0.9 + 2009-07-16 + mst + Added generic pci driver + + 0.8 2008-12-24 @@ -809,6 +820,158 @@ framework to set up sysfs files for this region. Simply leave it alone. + + +Generic PCI UIO driver + + The generic driver is a kernel module named uio_pci_generic. + It can work with any device compliant to PCI 2.3 (circa 2002) and + any compliant PCI Express device. Using this, you only need to + write the userspace driver, removing the need to write + a hardware-specific kernel module. + + + +Making the driver recognize the device + +Since the driver does not declare any device ids, it will not get loaded +automatically and will not automatically bind to any devices, you must load it +and allocate id to the driver yourself. For example: + + modprobe uio_pci_generic + echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_generic/new_id + + + +If there already is a hardware specific kernel driver for your device, the +generic driver still won't bind to it, in this case if you want to use the +generic driver (why would you?) you'll have to manually unbind the hardware +specific driver and bind the generic driver, like this: + + echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind + echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_generic/bind + + + +You can verify that the device has been bound to the driver +by looking for it in sysfs, for example like the following: + + ls -l /sys/bus/pci/devices/0000:00:19.0/driver + +Which if successful should print + + .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_generic + +Note that the generic driver will not bind to old PCI 2.2 devices. +If binding the device failed, run the following command: + + dmesg + +and look in the output for failure reasons + + + + +Things to know about uio_pci_generic + +Interrupts are handled using the Interrupt Disable bit in the PCI command +register and Interrupt Status bit in the PCI status register. All devices +compliant to PCI 2.3 (circa 2002) and all compliant PCI Express devices should +support these bits. uio_pci_generic detects this support, and won't bind to +devices which do not support the Interrupt Disable Bit in the command register. + + +On each interrupt, uio_pci_generic sets the Interrupt Disable bit. +This prevents the device from generating further interrupts +until the bit is cleared. The userspace driver should clear this +bit before blocking and waiting for more interrupts. + + + +Writing userspace driver using uio_pci_generic + +Userspace driver can use pci sysfs interface, or the +libpci libray that wraps it, to talk to the device and to +re-enable interrupts by writing to the command register. + + + +Example code using uio_pci_generic + +Here is some sample userspace driver code using uio_pci_generic: + +#include <stdlib.h> +#include <stdio.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <errno.h> + +int main() +{ + int uiofd; + int configfd; + int err; + int i; + unsigned icount; + unsigned char command_high; + + uiofd = open("/dev/uio0", O_RDONLY); + if (uiofd < 0) { + perror("uio open:"); + return errno; + } + configfd = open("/sys/class/uio/uio0/device/config", O_RDWR); + if (uiofd < 0) { + perror("config open:"); + return errno; + } + + /* Read and cache command value */ + err = pread(configfd, &command_high, 1, 5); + if (err != 1) { + perror("command config read:"); + return errno; + } + command_high &= ~0x4; + + for(i = 0;; ++i) { + /* Print out a message, for debugging. */ + if (i == 0) + fprintf(stderr, "Started uio test driver.\n"); + else + fprintf(stderr, "Interrupts: %d\n", icount); + + /****************************************/ + /* Here we got an interrupt from the + device. Do something to it. */ + /****************************************/ + + /* Re-enable interrupts. */ + err = pwrite(configfd, &command_high, 1, 5); + if (err != 1) { + perror("config write:"); + break; + } + + /* Wait for next interrupt. */ + err = read(uiofd, &icount, 4); + if (err != 4) { + perror("uio read:"); + break; + } + + } + return errno; +} + + + + + + + Further information diff --git a/MAINTAINERS b/MAINTAINERS index 837b5985ac4..01193a4fe30 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2218,6 +2218,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git S: Maintained F: include/asm-generic +GENERIC UIO DRIVER FOR PCI DEVICES +M: Michael S. Tsirkin +L: kvm@vger.kernel.org +L: linux-kernel@vger.kernel.org +S: Supported +F: drivers/uio/uio_pci_generic.c + GFS2 FILE SYSTEM M: Steven Whitehouse L: cluster-devel@redhat.com diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 45200fd6853..8aa1955f35e 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -84,4 +84,14 @@ config UIO_SERCOS3 If you compile this as a module, it will be called uio_sercos3. +config UIO_PCI_GENERIC + tristate "Generic driver for PCI 2.3 and PCI Express cards" + depends on PCI + default n + help + Generic driver that you can bind, dynamically, to any + PCI 2.3 compliant and PCI Express card. It is useful, + primarily, for virtualization scenarios. + If you compile this as a module, it will be called uio_pci_generic. + endif diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile index 5c2586d7579..73b2e751672 100644 --- a/drivers/uio/Makefile +++ b/drivers/uio/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdrv_genirq.o obj-$(CONFIG_UIO_SMX) += uio_smx.o obj-$(CONFIG_UIO_AEC) += uio_aec.o obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o +obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o diff --git a/drivers/uio/uio_pci_generic.c b/drivers/uio/uio_pci_generic.c new file mode 100644 index 00000000000..313da35984a --- /dev/null +++ b/drivers/uio/uio_pci_generic.c @@ -0,0 +1,207 @@ +/* uio_pci_generic - generic UIO driver for PCI 2.3 devices + * + * Copyright (C) 2009 Red Hat, Inc. + * Author: Michael S. Tsirkin + * + * This work is licensed under the terms of the GNU GPL, version 2. + * + * Since the driver does not declare any device ids, you must allocate + * id and bind the device to the driver yourself. For example: + * + * # echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_generic/new_id + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_generic/bind + * # ls -l /sys/bus/pci/devices/0000:00:19.0/driver + * .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_generic + * + * Driver won't bind to devices which do not support the Interrupt Disable Bit + * in the command register. All devices compliant to PCI 2.3 (circa 2002) and + * all compliant PCI Express devices should support this bit. + */ + +#include +#include +#include +#include +#include + +#define DRIVER_VERSION "0.01.0" +#define DRIVER_AUTHOR "Michael S. Tsirkin " +#define DRIVER_DESC "Generic UIO driver for PCI 2.3 devices" + +struct uio_pci_generic_dev { + struct uio_info info; + struct pci_dev *pdev; + spinlock_t lock; /* guards command register accesses */ +}; + +static inline struct uio_pci_generic_dev * +to_uio_pci_generic_dev(struct uio_info *info) +{ + return container_of(info, struct uio_pci_generic_dev, info); +} + +/* Interrupt handler. Read/modify/write the command register to disable + * the interrupt. */ +static irqreturn_t irqhandler(int irq, struct uio_info *info) +{ + struct uio_pci_generic_dev *gdev = to_uio_pci_generic_dev(info); + struct pci_dev *pdev = gdev->pdev; + irqreturn_t ret = IRQ_NONE; + u32 cmd_status_dword; + u16 origcmd, newcmd, status; + + /* We do a single dword read to retrieve both command and status. + * Document assumptions that make this possible. */ + BUILD_BUG_ON(PCI_COMMAND % 4); + BUILD_BUG_ON(PCI_COMMAND + 2 != PCI_STATUS); + + spin_lock_irq(&gdev->lock); + pci_block_user_cfg_access(pdev); + + /* Read both command and status registers in a single 32-bit operation. + * Note: we could cache the value for command and move the status read + * out of the lock if there was a way to get notified of user changes + * to command register through sysfs. Should be good for shared irqs. */ + pci_read_config_dword(pdev, PCI_COMMAND, &cmd_status_dword); + origcmd = cmd_status_dword; + status = cmd_status_dword >> 16; + + /* Check interrupt status register to see whether our device + * triggered the interrupt. */ + if (!(status & PCI_STATUS_INTERRUPT)) + goto done; + + /* We triggered the interrupt, disable it. */ + newcmd = origcmd | PCI_COMMAND_INTX_DISABLE; + if (newcmd != origcmd) + pci_write_config_word(pdev, PCI_COMMAND, newcmd); + + /* UIO core will signal the user process. */ + ret = IRQ_HANDLED; +done: + + pci_unblock_user_cfg_access(pdev); + spin_unlock_irq(&gdev->lock); + return ret; +} + +/* Verify that the device supports Interrupt Disable bit in command register, + * per PCI 2.3, by flipping this bit and reading it back: this bit was readonly + * in PCI 2.2. */ +static int __devinit verify_pci_2_3(struct pci_dev *pdev) +{ + u16 orig, new; + int err = 0; + + pci_block_user_cfg_access(pdev); + pci_read_config_word(pdev, PCI_COMMAND, &orig); + pci_write_config_word(pdev, PCI_COMMAND, + orig ^ PCI_COMMAND_INTX_DISABLE); + pci_read_config_word(pdev, PCI_COMMAND, &new); + /* There's no way to protect against + * hardware bugs or detect them reliably, but as long as we know + * what the value should be, let's go ahead and check it. */ + if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) { + err = -EBUSY; + dev_err(&pdev->dev, "Command changed from 0x%x to 0x%x: " + "driver or HW bug?\n", orig, new); + goto err; + } + if (!((new ^ orig) & PCI_COMMAND_INTX_DISABLE)) { + dev_warn(&pdev->dev, "Device does not support " + "disabling interrupts: unable to bind.\n"); + err = -ENODEV; + goto err; + } + /* Now restore the original value. */ + pci_write_config_word(pdev, PCI_COMMAND, orig); +err: + pci_unblock_user_cfg_access(pdev); + return err; +} + +static int __devinit probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct uio_pci_generic_dev *gdev; + int err; + + if (!pdev->irq) { + dev_warn(&pdev->dev, "No IRQ assigned to device: " + "no support for interrupts?\n"); + return -ENODEV; + } + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "%s: pci_enable_device failed: %d\n", + __func__, err); + return err; + } + + err = verify_pci_2_3(pdev); + if (err) + goto err_verify; + + gdev = kzalloc(sizeof(struct uio_pci_generic_dev), GFP_KERNEL); + if (!gdev) { + err = -ENOMEM; + goto err_alloc; + } + + gdev->info.name = "uio_pci_generic"; + gdev->info.version = DRIVER_VERSION; + gdev->info.irq = pdev->irq; + gdev->info.irq_flags = IRQF_SHARED; + gdev->info.handler = irqhandler; + gdev->pdev = pdev; + spin_lock_init(&gdev->lock); + + if (uio_register_device(&pdev->dev, &gdev->info)) + goto err_register; + pci_set_drvdata(pdev, gdev); + + return 0; +err_register: + kfree(gdev); +err_alloc: +err_verify: + pci_disable_device(pdev); + return err; +} + +static void remove(struct pci_dev *pdev) +{ + struct uio_pci_generic_dev *gdev = pci_get_drvdata(pdev); + + uio_unregister_device(&gdev->info); + pci_disable_device(pdev); + kfree(gdev); +} + +static struct pci_driver driver = { + .name = "uio_pci_generic", + .id_table = NULL, /* only dynamic id's */ + .probe = probe, + .remove = remove, +}; + +static int __init init(void) +{ + pr_info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); + return pci_register_driver(&driver); +} + +static void __exit cleanup(void) +{ + pci_unregister_driver(&driver); +} + +module_init(init); +module_exit(cleanup); + +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index fcaee42c7ac..dd0bed4f1cf 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -42,6 +42,7 @@ #define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ #define PCI_STATUS 0x06 /* 16 bits */ +#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */ #define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ #define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ #define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ -- cgit v1.2.3-70-g09d2 From 52ad51e7a93558a218cd00059bd69881a82eb2bb Mon Sep 17 00:00:00 2001 From: GeunSik Lim Date: Mon, 7 Sep 2009 21:37:17 +0900 Subject: debugfs: Fix mount directory of debugfs by default in events.txt We need common default directory of denbugfs for consistency. (debugfs's default directory is /sys/kernel/debug/ by debugfs.) Signed-off-by: GeunSik Lim Signed-off-by: Greg Kroah-Hartman --- Documentation/trace/events.txt | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'Documentation') diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt index 2bcc8d4dea2..90e8b3383ba 100644 --- a/Documentation/trace/events.txt +++ b/Documentation/trace/events.txt @@ -22,12 +22,12 @@ tracing information should be printed. --------------------------------- The events which are available for tracing can be found in the file -/debug/tracing/available_events. +/sys/kernel/debug/tracing/available_events. To enable a particular event, such as 'sched_wakeup', simply echo it -to /debug/tracing/set_event. For example: +to /sys/kernel/debug/tracing/set_event. For example: - # echo sched_wakeup >> /debug/tracing/set_event + # echo sched_wakeup >> /sys/kernel/debug/tracing/set_event [ Note: '>>' is necessary, otherwise it will firstly disable all the events. ] @@ -35,15 +35,15 @@ to /debug/tracing/set_event. For example: To disable an event, echo the event name to the set_event file prefixed with an exclamation point: - # echo '!sched_wakeup' >> /debug/tracing/set_event + # echo '!sched_wakeup' >> /sys/kernel/debug/tracing/set_event To disable all events, echo an empty line to the set_event file: - # echo > /debug/tracing/set_event + # echo > /sys/kernel/debug/tracing/set_event To enable all events, echo '*:*' or '*:' to the set_event file: - # echo *:* > /debug/tracing/set_event + # echo *:* > /sys/kernel/debug/tracing/set_event The events are organized into subsystems, such as ext4, irq, sched, etc., and a full event name looks like this: :. The @@ -52,29 +52,29 @@ file. All of the events in a subsystem can be specified via the syntax ":*"; for example, to enable all irq events, you can use the command: - # echo 'irq:*' > /debug/tracing/set_event + # echo 'irq:*' > /sys/kernel/debug/tracing/set_event 2.2 Via the 'enable' toggle --------------------------- -The events available are also listed in /debug/tracing/events/ hierarchy +The events available are also listed in /sys/kernel/debug/tracing/events/ hierarchy of directories. To enable event 'sched_wakeup': - # echo 1 > /debug/tracing/events/sched/sched_wakeup/enable + # echo 1 > /sys/kernel/debug/tracing/events/sched/sched_wakeup/enable To disable it: - # echo 0 > /debug/tracing/events/sched/sched_wakeup/enable + # echo 0 > /sys/kernel/debug/tracing/events/sched/sched_wakeup/enable To enable all events in sched subsystem: - # echo 1 > /debug/tracing/events/sched/enable + # echo 1 > /sys/kernel/debug/tracing/events/sched/enable To eanble all events: - # echo 1 > /debug/tracing/events/enable + # echo 1 > /sys/kernel/debug/tracing/events/enable When reading one of these enable files, there are four results: -- cgit v1.2.3-70-g09d2 From 09d3f3f0e02c8a900d076c302c5c02227f33572d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 15 Sep 2009 17:04:38 -0700 Subject: sparc: Kill PROM console driver. Many years ago when this driver was written, it had a use, but these days it's nothing but trouble and distributions should not enable it in any situation. Pretty much every console device a sparc machine could see has a bonafide real driver, making the PROM console hack unnecessary. If any new device shows up, we should write a driver instead of depending upon this crutch to save us. We've been able to take care of this even when no chip documentation exists (sunxvr500, sunxvr2500) so there are no excuses. Signed-off-by: David S. Miller --- Documentation/dontdiff | 1 - arch/sparc/kernel/setup_32.c | 2 - arch/sparc/kernel/setup_64.c | 2 - drivers/char/vt.c | 3 - drivers/video/console/.gitignore | 2 - drivers/video/console/Kconfig | 9 +- drivers/video/console/Makefile | 12 - drivers/video/console/prom.uni | 11 - drivers/video/console/promcon.c | 598 --------------------------------------- scripts/Makefile | 1 - 10 files changed, 1 insertion(+), 640 deletions(-) delete mode 100644 drivers/video/console/.gitignore delete mode 100644 drivers/video/console/prom.uni delete mode 100644 drivers/video/console/promcon.c (limited to 'Documentation') diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 88519daab6e..e1efc400bed 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -152,7 +152,6 @@ piggy.gz piggyback pnmtologo ppc_defs.h* -promcon_tbl.c pss_boot.h qconf raid6altivec*.c diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c index 16a47ffe03c..9be2af55c5c 100644 --- a/arch/sparc/kernel/setup_32.c +++ b/arch/sparc/kernel/setup_32.c @@ -268,8 +268,6 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; -#elif defined(CONFIG_PROM_CONSOLE) - conswitchp = &prom_con; #endif boot_flags_init(*cmdline_p); diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c index f2bcfd2967d..21180339cb0 100644 --- a/arch/sparc/kernel/setup_64.c +++ b/arch/sparc/kernel/setup_64.c @@ -295,8 +295,6 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; -#elif defined(CONFIG_PROM_CONSOLE) - conswitchp = &prom_con; #endif idprom_init(); diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 404f4c1ee43..6aa88f50b03 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -2948,9 +2948,6 @@ int __init vty_init(const struct file_operations *console_fops) panic("Couldn't register console driver\n"); kbd_init(); console_map_init(); -#ifdef CONFIG_PROM_CONSOLE - prom_con_init(); -#endif #ifdef CONFIG_MDA_CONSOLE mda_console_init(); #endif diff --git a/drivers/video/console/.gitignore b/drivers/video/console/.gitignore deleted file mode 100644 index 0c258b45439..00000000000 --- a/drivers/video/console/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -# conmakehash generated file -promcon_tbl.c diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 2f50a80b413..fc7d9bbb548 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -67,16 +67,9 @@ config SGI_NEWPORT_CONSOLE # bool 'IODC console' CONFIG_IODC_CONSOLE -config PROM_CONSOLE - bool "PROM console" - depends on SPARC - help - Say Y to build a console driver for Sun machines that uses the - terminal emulation built into their console PROMS. - config DUMMY_CONSOLE bool - depends on PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y + depends on VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y default y config DUMMY_CONSOLE_COLUMNS diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile index ac46cc3f6a2..a862e9173eb 100644 --- a/drivers/video/console/Makefile +++ b/drivers/video/console/Makefile @@ -22,7 +22,6 @@ font-objs += $(font-objs-y) obj-$(CONFIG_DUMMY_CONSOLE) += dummycon.o obj-$(CONFIG_SGI_NEWPORT_CONSOLE) += newport_con.o font.o -obj-$(CONFIG_PROM_CONSOLE) += promcon.o promcon_tbl.o obj-$(CONFIG_STI_CONSOLE) += sticon.o sticore.o font.o obj-$(CONFIG_VGA_CONSOLE) += vgacon.o obj-$(CONFIG_MDA_CONSOLE) += mdacon.o @@ -40,14 +39,3 @@ obj-$(CONFIG_FB_STI) += sticore.o font.o ifeq ($(CONFIG_USB_SISUSBVGA_CON),y) obj-$(CONFIG_USB_SISUSBVGA) += font.o endif - -# Targets that kbuild needs to know about -targets := promcon_tbl.c - -quiet_cmd_conmakehash = CNMKHSH $@ - cmd_conmakehash = scripts/conmakehash $< | \ - sed -e '/\#include <[^>]*>/p' -e 's/types/init/' \ - -e 's/dfont\(_uni.*\]\)/promfont\1 /' > $@ - -$(obj)/promcon_tbl.c: $(src)/prom.uni - $(call cmd,conmakehash) diff --git a/drivers/video/console/prom.uni b/drivers/video/console/prom.uni deleted file mode 100644 index 58f9c04ed9d..00000000000 --- a/drivers/video/console/prom.uni +++ /dev/null @@ -1,11 +0,0 @@ -# -# Unicode mapping table for font in Sun PROM -# -# -0x20-0x7e idem -0xa0-0xff idem -# -0x7c U+2502 -0x2d U+2500 -0x2b U+250c U+2510 U+2514 U+2518 U+251c U+2524 U+252c U+2534 U+253c -0xa4 U+fffd diff --git a/drivers/video/console/promcon.c b/drivers/video/console/promcon.c deleted file mode 100644 index ae02e4eb18e..00000000000 --- a/drivers/video/console/promcon.c +++ /dev/null @@ -1,598 +0,0 @@ -/* $Id: promcon.c,v 1.17 2000/07/26 23:02:52 davem Exp $ - * Console driver utilizing PROM sun terminal emulation - * - * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) - * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -static short pw = 80 - 1, ph = 34 - 1; -static short px, py; -static unsigned long promcon_uni_pagedir[2]; - -extern u8 promfont_unicount[]; -extern u16 promfont_unitable[]; - -#define PROMCON_COLOR 0 - -#if PROMCON_COLOR -#define inverted(s) ((((s) & 0x7700) == 0x0700) ? 0 : 1) -#else -#define inverted(s) (((s) & 0x0800) ? 1 : 0) -#endif - -static __inline__ void -promcon_puts(char *buf, int cnt) -{ - prom_printf("%*.*s", cnt, cnt, buf); -} - -static int -promcon_start(struct vc_data *conp, char *b) -{ - unsigned short *s = (unsigned short *) - (conp->vc_origin + py * conp->vc_size_row + (px << 1)); - u16 cs; - - cs = scr_readw(s); - if (px == pw) { - unsigned short *t = s - 1; - u16 ct = scr_readw(t); - - if (inverted(cs) && inverted(ct)) - return sprintf(b, "\b\033[7m%c\b\033[@%c\033[m", cs, - ct); - else if (inverted(cs)) - return sprintf(b, "\b\033[7m%c\033[m\b\033[@%c", cs, - ct); - else if (inverted(ct)) - return sprintf(b, "\b%c\b\033[@\033[7m%c\033[m", cs, - ct); - else - return sprintf(b, "\b%c\b\033[@%c", cs, ct); - } - - if (inverted(cs)) - return sprintf(b, "\033[7m%c\033[m\b", cs); - else - return sprintf(b, "%c\b", cs); -} - -static int -promcon_end(struct vc_data *conp, char *b) -{ - unsigned short *s = (unsigned short *) - (conp->vc_origin + py * conp->vc_size_row + (px << 1)); - char *p = b; - u16 cs; - - b += sprintf(b, "\033[%d;%dH", py + 1, px + 1); - - cs = scr_readw(s); - if (px == pw) { - unsigned short *t = s - 1; - u16 ct = scr_readw(t); - - if (inverted(cs) && inverted(ct)) - b += sprintf(b, "\b%c\b\033[@\033[7m%c\033[m", cs, ct); - else if (inverted(cs)) - b += sprintf(b, "\b%c\b\033[@%c", cs, ct); - else if (inverted(ct)) - b += sprintf(b, "\b\033[7m%c\b\033[@%c\033[m", cs, ct); - else - b += sprintf(b, "\b\033[7m%c\033[m\b\033[@%c", cs, ct); - return b - p; - } - - if (inverted(cs)) - b += sprintf(b, "%c\b", cs); - else - b += sprintf(b, "\033[7m%c\033[m\b", cs); - return b - p; -} - -const char *promcon_startup(void) -{ - const char *display_desc = "PROM"; - int node; - char buf[40]; - - node = prom_getchild(prom_root_node); - node = prom_searchsiblings(node, "options"); - if (prom_getproperty(node, "screen-#columns", buf, 40) != -1) { - pw = simple_strtoul(buf, NULL, 0); - if (pw < 10 || pw > 256) - pw = 80; - pw--; - } - if (prom_getproperty(node, "screen-#rows", buf, 40) != -1) { - ph = simple_strtoul(buf, NULL, 0); - if (ph < 10 || ph > 256) - ph = 34; - ph--; - } - promcon_puts("\033[H\033[J", 6); - return display_desc; -} - -static void -promcon_init_unimap(struct vc_data *conp) -{ - mm_segment_t old_fs = get_fs(); - struct unipair *p, *p1; - u16 *q; - int i, j, k; - - p = kmalloc(256*sizeof(struct unipair), GFP_KERNEL); - if (!p) return; - - q = promfont_unitable; - p1 = p; - k = 0; - for (i = 0; i < 256; i++) - for (j = promfont_unicount[i]; j; j--) { - p1->unicode = *q++; - p1->fontpos = i; - p1++; - k++; - } - set_fs(KERNEL_DS); - con_clear_unimap(conp, NULL); - con_set_unimap(conp, k, p); - con_protect_unimap(conp, 1); - set_fs(old_fs); - kfree(p); -} - -static void -promcon_init(struct vc_data *conp, int init) -{ - unsigned long p; - - conp->vc_can_do_color = PROMCON_COLOR; - if (init) { - conp->vc_cols = pw + 1; - conp->vc_rows = ph + 1; - } - p = *conp->vc_uni_pagedir_loc; - if (conp->vc_uni_pagedir_loc == &conp->vc_uni_pagedir || - !--conp->vc_uni_pagedir_loc[1]) - con_free_unimap(conp); - conp->vc_uni_pagedir_loc = promcon_uni_pagedir; - promcon_uni_pagedir[1]++; - if (!promcon_uni_pagedir[0] && p) { - promcon_init_unimap(conp); - } - if (!init) { - if (conp->vc_cols != pw + 1 || conp->vc_rows != ph + 1) - vc_resize(conp, pw + 1, ph + 1); - } -} - -static void -promcon_deinit(struct vc_data *conp) -{ - /* When closing the last console, reset video origin */ - if (!--promcon_uni_pagedir[1]) - con_free_unimap(conp); - conp->vc_uni_pagedir_loc = &conp->vc_uni_pagedir; - con_set_default_unimap(conp); -} - -static int -promcon_switch(struct vc_data *conp) -{ - return 1; -} - -static unsigned short * -promcon_repaint_line(unsigned short *s, unsigned char *buf, unsigned char **bp) -{ - int cnt = pw + 1; - int attr = -1; - unsigned char *b = *bp; - - while (cnt--) { - u16 c = scr_readw(s); - if (attr != inverted(c)) { - attr = inverted(c); - if (attr) { - strcpy (b, "\033[7m"); - b += 4; - } else { - strcpy (b, "\033[m"); - b += 3; - } - } - *b++ = c; - s++; - if (b - buf >= 224) { - promcon_puts(buf, b - buf); - b = buf; - } - } - *bp = b; - return s; -} - -static void -promcon_putcs(struct vc_data *conp, const unsigned short *s, - int count, int y, int x) -{ - unsigned char buf[256], *b = buf; - unsigned short attr = scr_readw(s); - unsigned char save; - int i, last = 0; - - if (console_blanked) - return; - - if (count <= 0) - return; - - b += promcon_start(conp, b); - - if (x + count >= pw + 1) { - if (count == 1) { - x -= 1; - save = scr_readw((unsigned short *)(conp->vc_origin - + y * conp->vc_size_row - + (x << 1))); - - if (px != x || py != y) { - b += sprintf(b, "\033[%d;%dH", y + 1, x + 1); - px = x; - py = y; - } - - if (inverted(attr)) - b += sprintf(b, "\033[7m%c\033[m", scr_readw(s++)); - else - b += sprintf(b, "%c", scr_readw(s++)); - - strcpy(b, "\b\033[@"); - b += 4; - - if (inverted(save)) - b += sprintf(b, "\033[7m%c\033[m", save); - else - b += sprintf(b, "%c", save); - - px++; - - b += promcon_end(conp, b); - promcon_puts(buf, b - buf); - return; - } else { - last = 1; - count = pw - x - 1; - } - } - - if (inverted(attr)) { - strcpy(b, "\033[7m"); - b += 4; - } - - if (px != x || py != y) { - b += sprintf(b, "\033[%d;%dH", y + 1, x + 1); - px = x; - py = y; - } - - for (i = 0; i < count; i++) { - if (b - buf >= 224) { - promcon_puts(buf, b - buf); - b = buf; - } - *b++ = scr_readw(s++); - } - - px += count; - - if (last) { - save = scr_readw(s++); - b += sprintf(b, "%c\b\033[@%c", scr_readw(s++), save); - px++; - } - - if (inverted(attr)) { - strcpy(b, "\033[m"); - b += 3; - } - - b += promcon_end(conp, b); - promcon_puts(buf, b - buf); -} - -static void -promcon_putc(struct vc_data *conp, int c, int y, int x) -{ - unsigned short s; - - if (console_blanked) - return; - - scr_writew(c, &s); - promcon_putcs(conp, &s, 1, y, x); -} - -static void -promcon_clear(struct vc_data *conp, int sy, int sx, int height, int width) -{ - unsigned char buf[256], *b = buf; - int i, j; - - if (console_blanked) - return; - - b += promcon_start(conp, b); - - if (!sx && width == pw + 1) { - - if (!sy && height == ph + 1) { - strcpy(b, "\033[H\033[J"); - b += 6; - b += promcon_end(conp, b); - promcon_puts(buf, b - buf); - return; - } else if (sy + height == ph + 1) { - b += sprintf(b, "\033[%dH\033[J", sy + 1); - b += promcon_end(conp, b); - promcon_puts(buf, b - buf); - return; - } - - b += sprintf(b, "\033[%dH", sy + 1); - for (i = 1; i < height; i++) { - strcpy(b, "\033[K\n"); - b += 4; - } - - strcpy(b, "\033[K"); - b += 3; - - b += promcon_end(conp, b); - promcon_puts(buf, b - buf); - return; - - } else if (sx + width == pw + 1) { - - b += sprintf(b, "\033[%d;%dH", sy + 1, sx + 1); - for (i = 1; i < height; i++) { - strcpy(b, "\033[K\n"); - b += 4; - } - - strcpy(b, "\033[K"); - b += 3; - - b += promcon_end(conp, b); - promcon_puts(buf, b - buf); - return; - } - - for (i = sy + 1; i <= sy + height; i++) { - b += sprintf(b, "\033[%d;%dH", i, sx + 1); - for (j = 0; j < width; j++) - *b++ = ' '; - if (b - buf + width >= 224) { - promcon_puts(buf, b - buf); - b = buf; - } - } - - b += promcon_end(conp, b); - promcon_puts(buf, b - buf); -} - -static void -promcon_bmove(struct vc_data *conp, int sy, int sx, int dy, int dx, - int height, int width) -{ - char buf[256], *b = buf; - - if (console_blanked) - return; - - b += promcon_start(conp, b); - if (sy == dy && height == 1) { - if (dx > sx && dx + width == conp->vc_cols) - b += sprintf(b, "\033[%d;%dH\033[%d@\033[%d;%dH", - sy + 1, sx + 1, dx - sx, py + 1, px + 1); - else if (dx < sx && sx + width == conp->vc_cols) - b += sprintf(b, "\033[%d;%dH\033[%dP\033[%d;%dH", - dy + 1, dx + 1, sx - dx, py + 1, px + 1); - - b += promcon_end(conp, b); - promcon_puts(buf, b - buf); - return; - } - - /* - * FIXME: What to do here??? - * Current console.c should not call it like that ever. - */ - prom_printf("\033[7mFIXME: bmove not handled\033[m\n"); -} - -static void -promcon_cursor(struct vc_data *conp, int mode) -{ - char buf[32], *b = buf; - - switch (mode) { - case CM_ERASE: - break; - - case CM_MOVE: - case CM_DRAW: - b += promcon_start(conp, b); - if (px != conp->vc_x || py != conp->vc_y) { - px = conp->vc_x; - py = conp->vc_y; - b += sprintf(b, "\033[%d;%dH", py + 1, px + 1); - } - promcon_puts(buf, b - buf); - break; - } -} - -static int -promcon_blank(struct vc_data *conp, int blank, int mode_switch) -{ - if (blank) { - promcon_puts("\033[H\033[J\033[7m \033[m\b", 15); - return 0; - } else { - /* Let console.c redraw */ - return 1; - } -} - -static int -promcon_scroll(struct vc_data *conp, int t, int b, int dir, int count) -{ - unsigned char buf[256], *p = buf; - unsigned short *s; - int i; - - if (console_blanked) - return 0; - - p += promcon_start(conp, p); - - switch (dir) { - case SM_UP: - if (b == ph + 1) { - p += sprintf(p, "\033[%dH\033[%dM", t + 1, count); - px = 0; - py = t; - p += promcon_end(conp, p); - promcon_puts(buf, p - buf); - break; - } - - s = (unsigned short *)(conp->vc_origin - + (t + count) * conp->vc_size_row); - - p += sprintf(p, "\033[%dH", t + 1); - - for (i = t; i < b - count; i++) - s = promcon_repaint_line(s, buf, &p); - - for (; i < b - 1; i++) { - strcpy(p, "\033[K\n"); - p += 4; - if (p - buf >= 224) { - promcon_puts(buf, p - buf); - p = buf; - } - } - - strcpy(p, "\033[K"); - p += 3; - - p += promcon_end(conp, p); - promcon_puts(buf, p - buf); - break; - - case SM_DOWN: - if (b == ph + 1) { - p += sprintf(p, "\033[%dH\033[%dL", t + 1, count); - px = 0; - py = t; - p += promcon_end(conp, p); - promcon_puts(buf, p - buf); - break; - } - - s = (unsigned short *)(conp->vc_origin + t * conp->vc_size_row); - - p += sprintf(p, "\033[%dH", t + 1); - - for (i = t; i < t + count; i++) { - strcpy(p, "\033[K\n"); - p += 4; - if (p - buf >= 224) { - promcon_puts(buf, p - buf); - p = buf; - } - } - - for (; i < b; i++) - s = promcon_repaint_line(s, buf, &p); - - p += promcon_end(conp, p); - promcon_puts(buf, p - buf); - break; - } - - return 0; -} - -#if !(PROMCON_COLOR) -static u8 promcon_build_attr(struct vc_data *conp, u8 _color, u8 _intensity, - u8 _blink, u8 _underline, u8 _reverse, u8 _italic) -{ - return (_reverse) ? 0xf : 0x7; -} -#endif - -/* - * The console 'switch' structure for the VGA based console - */ - -static int promcon_dummy(void) -{ - return 0; -} - -#define DUMMY (void *) promcon_dummy - -const struct consw prom_con = { - .owner = THIS_MODULE, - .con_startup = promcon_startup, - .con_init = promcon_init, - .con_deinit = promcon_deinit, - .con_clear = promcon_clear, - .con_putc = promcon_putc, - .con_putcs = promcon_putcs, - .con_cursor = promcon_cursor, - .con_scroll = promcon_scroll, - .con_bmove = promcon_bmove, - .con_switch = promcon_switch, - .con_blank = promcon_blank, - .con_set_palette = DUMMY, - .con_scrolldelta = DUMMY, -#if !(PROMCON_COLOR) - .con_build_attr = promcon_build_attr, -#endif -}; - -void __init prom_con_init(void) -{ -#ifdef CONFIG_DUMMY_CONSOLE - if (conswitchp == &dummy_con) - take_over_console(&prom_con, 0, MAX_NR_CONSOLES-1, 1); - else -#endif - if (conswitchp == &prom_con) - promcon_init_unimap(vc_cons[fg_console].d); -} diff --git a/scripts/Makefile b/scripts/Makefile index 9dd5b25a1d5..842dbc2d5ae 100644 --- a/scripts/Makefile +++ b/scripts/Makefile @@ -10,7 +10,6 @@ hostprogs-$(CONFIG_KALLSYMS) += kallsyms hostprogs-$(CONFIG_LOGO) += pnmtologo hostprogs-$(CONFIG_VT) += conmakehash -hostprogs-$(CONFIG_PROM_CONSOLE) += conmakehash hostprogs-$(CONFIG_IKCONFIG) += bin2c always := $(hostprogs-y) $(hostprogs-m) -- cgit v1.2.3-70-g09d2 From fb6c023a2b845df1ec383b74644ac35a4bbb76b6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jul 2009 12:43:45 +0100 Subject: hwmon: Add WM835x PMIC hardware monitoring driver This driver provides reporting of the status supply voltage rails of the WM835x series of PMICs via the hwmon API. Signed-off-by: Mark Brown Acked-by: Jean Delvare Signed-off-by: Samuel Ortiz --- Documentation/hwmon/wm8350 | 26 +++++++ drivers/hwmon/Kconfig | 10 +++ drivers/hwmon/Makefile | 1 + drivers/hwmon/wm8350-hwmon.c | 151 ++++++++++++++++++++++++++++++++++++++++ drivers/mfd/wm8350-core.c | 3 + include/linux/mfd/wm8350/core.h | 6 ++ 6 files changed, 197 insertions(+) create mode 100644 Documentation/hwmon/wm8350 create mode 100644 drivers/hwmon/wm8350-hwmon.c (limited to 'Documentation') diff --git a/Documentation/hwmon/wm8350 b/Documentation/hwmon/wm8350 new file mode 100644 index 00000000000..98f923bd2e9 --- /dev/null +++ b/Documentation/hwmon/wm8350 @@ -0,0 +1,26 @@ +Kernel driver wm8350-hwmon +========================== + +Supported chips: + * Wolfson Microelectronics WM835x PMICs + Prefix: 'wm8350' + Datasheet: + http://www.wolfsonmicro.com/products/WM8350 + http://www.wolfsonmicro.com/products/WM8351 + http://www.wolfsonmicro.com/products/WM8352 + +Authors: Mark Brown + +Description +----------- + +The WM835x series of PMICs include an AUXADC which can be used to +monitor a range of system operating parameters, including the voltages +of the major supplies within the system. Currently the driver provides +simple access to these major supplies. + +Voltage Monitoring +------------------ + +Voltages are sampled by a 12 bit ADC. For the internal supplies the ADC +is referenced to the system VRTC. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 2e25b7a827d..120085ce651 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -937,6 +937,16 @@ config SENSORS_W83627EHF This driver can also be built as a module. If so, the module will be called w83627ehf. +config SENSORS_WM8350 + tristate "Wolfson Microelectronics WM835x" + depends on MFD_WM8350 + help + If you say yes here you get support for the hardware + monitoring features of the WM835x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm8350-hwmon. + config SENSORS_ULTRA45 tristate "Sun Ultra45 PIC16F747" depends on SPARC64 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 7f239a247c3..ed5f1781b8c 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o +obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c new file mode 100644 index 00000000000..13290595ca8 --- /dev/null +++ b/drivers/hwmon/wm8350-hwmon.c @@ -0,0 +1,151 @@ +/* + * drivers/hwmon/wm8350-hwmon.c - Wolfson Microelectronics WM8350 PMIC + * hardware monitoring features. + * + * Copyright (C) 2009 Wolfson Microelectronics plc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "wm8350\n"); +} + +static const char *input_names[] = { + [WM8350_AUXADC_USB] = "USB", + [WM8350_AUXADC_LINE] = "Line", + [WM8350_AUXADC_BATT] = "Battery", +}; + + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int val; + + val = wm8350_read_auxadc(wm8350, channel, 0, 0) * WM8350_AUX_COEFF; + val = DIV_ROUND_CLOSEST(val, 1000); + + return sprintf(buf, "%d\n", val); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int channel = to_sensor_dev_attr(attr)->index; + + return sprintf(buf, "%s\n", input_names[channel]); +} + +#define WM8350_NAMED_VOLTAGE(id, name) \ + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\ + NULL, name); \ + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \ + NULL, name) + +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +WM8350_NAMED_VOLTAGE(0, WM8350_AUXADC_USB); +WM8350_NAMED_VOLTAGE(1, WM8350_AUXADC_BATT); +WM8350_NAMED_VOLTAGE(2, WM8350_AUXADC_LINE); + +static struct attribute *wm8350_attributes[] = { + &dev_attr_name.attr, + + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_label.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + + NULL, +}; + +static const struct attribute_group wm8350_attr_group = { + .attrs = wm8350_attributes, +}; + +static int __devinit wm8350_hwmon_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + int ret; + + ret = sysfs_create_group(&pdev->dev.kobj, &wm8350_attr_group); + if (ret) + goto err; + + wm8350->hwmon.classdev = hwmon_device_register(&pdev->dev); + if (IS_ERR(wm8350->hwmon.classdev)) { + ret = PTR_ERR(wm8350->hwmon.classdev); + goto err_group; + } + + return 0; + +err_group: + sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group); +err: + return ret; +} + +static int __devexit wm8350_hwmon_remove(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + + hwmon_device_unregister(wm8350->hwmon.classdev); + sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group); + + return 0; +} + +static struct platform_driver wm8350_hwmon_driver = { + .probe = wm8350_hwmon_probe, + .remove = __devexit_p(wm8350_hwmon_remove), + .driver = { + .name = "wm8350-hwmon", + .owner = THIS_MODULE, + }, +}; + +static int __init wm8350_hwmon_init(void) +{ + return platform_driver_register(&wm8350_hwmon_driver); +} +module_init(wm8350_hwmon_init); + +static void __exit wm8350_hwmon_exit(void) +{ + platform_driver_unregister(&wm8350_hwmon_driver); +} +module_exit(wm8350_hwmon_exit); + +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("WM8350 Hardware Monitoring"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-hwmon"); diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index fe24079387c..9d662a576a4 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1472,6 +1472,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, &(wm8350->codec.pdev)); wm8350_client_dev_register(wm8350, "wm8350-gpio", &(wm8350->gpio.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-hwmon", + &(wm8350->hwmon.pdev)); wm8350_client_dev_register(wm8350, "wm8350-power", &(wm8350->power.pdev)); wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev)); @@ -1498,6 +1500,7 @@ void wm8350_device_exit(struct wm8350 *wm8350) platform_device_unregister(wm8350->wdt.pdev); platform_device_unregister(wm8350->rtc.pdev); platform_device_unregister(wm8350->power.pdev); + platform_device_unregister(wm8350->hwmon.pdev); platform_device_unregister(wm8350->gpio.pdev); platform_device_unregister(wm8350->codec.pdev); diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index 42cca672f34..969b0b55615 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -605,6 +605,11 @@ struct wm8350_irq { void *data; }; +struct wm8350_hwmon { + struct platform_device *pdev; + struct device *classdev; +}; + struct wm8350 { struct device *dev; @@ -629,6 +634,7 @@ struct wm8350 { /* Client devices */ struct wm8350_codec codec; struct wm8350_gpio gpio; + struct wm8350_hwmon hwmon; struct wm8350_pmic pmic; struct wm8350_power power; struct wm8350_rtc rtc; -- cgit v1.2.3-70-g09d2 From 08bad5a821371548942aa13565831f18fe1875f3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 28 Jul 2009 15:52:22 +0100 Subject: hwmon: WM831x PMIC hardware monitoring driver This driver adds support for the hardware monitoring features of the WM831x PMICs to the hwmon API. Monitoring is provided for the system voltages supported natively by the WM831x, the chip temperature, the battery temperature and the auxiliary inputs of the WM831x. Currently no alarms are supported, though digital comparators on the WM831x devices would allow these to be provided. Since the auxiliary and battery temperature input scaling depends on the system configuration the value is reported as a voltage to userspace. Signed-off-by: Mark Brown Acked-by: Jean Delvare Signed-off-by: Samuel Ortiz --- Documentation/hwmon/wm831x | 37 +++++++ drivers/hwmon/Kconfig | 11 +++ drivers/hwmon/Makefile | 1 + drivers/hwmon/wm831x-hwmon.c | 226 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 275 insertions(+) create mode 100644 Documentation/hwmon/wm831x create mode 100644 drivers/hwmon/wm831x-hwmon.c (limited to 'Documentation') diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x new file mode 100644 index 00000000000..24f47d8f6a4 --- /dev/null +++ b/Documentation/hwmon/wm831x @@ -0,0 +1,37 @@ +Kernel driver wm831x-hwmon +========================== + +Supported chips: + * Wolfson Microelectronics WM831x PMICs + Prefix: 'wm831x' + Datasheet: + http://www.wolfsonmicro.com/products/WM8310 + http://www.wolfsonmicro.com/products/WM8311 + http://www.wolfsonmicro.com/products/WM8312 + +Authors: Mark Brown + +Description +----------- + +The WM831x series of PMICs include an AUXADC which can be used to +monitor a range of system operating parameters, including the voltages +of the major supplies within the system. Currently the driver provides +reporting of all the input values but does not provide any alarms. + +Voltage Monitoring +------------------ + +Voltages are sampled by a 12 bit ADC. Voltages in milivolts are 1.465 +times the ADC value. + +Temperature Monitoring +---------------------- + +Temperatures are sampled by a 12 bit ADC. Chip and battery temperatures +are available. The chip temperature is calculated as: + + Degrees celsius = (512.18 - data) / 1.0983 + +while the battery temperature calculation will depend on the NTC +thermistor component. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 120085ce651..83e07e55a78 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -937,6 +937,17 @@ config SENSORS_W83627EHF This driver can also be built as a module. If so, the module will be called w83627ehf. +config SENSORS_WM831X + tristate "WM831x PMICs" + depends on MFD_WM831X + help + If you say yes here you get support for the hardware + monitoring functionality of the Wolfson Microelectronics + WM831x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm831x-hwmon. + config SENSORS_WM8350 tristate "Wolfson Microelectronics WM835x" depends on MFD_WM8350 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index ed5f1781b8c..c5effd609ab 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o +obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y) diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c new file mode 100644 index 00000000000..c16e9e74c35 --- /dev/null +++ b/drivers/hwmon/wm831x-hwmon.c @@ -0,0 +1,226 @@ +/* + * drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC + * hardware monitoring features. + * + * Copyright (C) 2009 Wolfson Microelectronics plc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +struct wm831x_hwmon { + struct wm831x *wm831x; + struct device *classdev; +}; + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "wm831x\n"); +} + +static const char *input_names[] = { + [WM831X_AUX_SYSVDD] = "SYSVDD", + [WM831X_AUX_USB] = "USB", + [WM831X_AUX_BKUP_BATT] = "Backup battery", + [WM831X_AUX_BATT] = "Battery", + [WM831X_AUX_WALL] = "WALL", + [WM831X_AUX_CHIP_TEMP] = "PMIC", + [WM831X_AUX_BATT_TEMP] = "Battery", +}; + + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int ret; + + ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000)); +} + +static ssize_t show_chip_temp(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int ret; + + ret = wm831x_auxadc_read(hwmon->wm831x, channel); + if (ret < 0) + return ret; + + /* Degrees celsius = (512.18-ret) / 1.0983 */ + ret = 512180 - (ret * 1000); + ret = DIV_ROUND_CLOSEST(ret * 10000, 10983); + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int channel = to_sensor_dev_attr(attr)->index; + + return sprintf(buf, "%s\n", input_names[channel]); +} + +#define WM831X_VOLTAGE(id, name) \ + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \ + NULL, name) + +#define WM831X_NAMED_VOLTAGE(id, name) \ + WM831X_VOLTAGE(id, name); \ + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \ + NULL, name) + +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +WM831X_VOLTAGE(0, WM831X_AUX_AUX1); +WM831X_VOLTAGE(1, WM831X_AUX_AUX2); +WM831X_VOLTAGE(2, WM831X_AUX_AUX3); +WM831X_VOLTAGE(3, WM831X_AUX_AUX4); + +WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD); +WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB); +WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT); +WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL); +WM831X_NAMED_VOLTAGE(8, WM831X_AUX_BKUP_BATT); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL, + WM831X_AUX_CHIP_TEMP); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, + WM831X_AUX_CHIP_TEMP); +/* Report as a voltage since conversion depends on external components + * and that's what the ABI wants. */ +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_voltage, NULL, + WM831X_AUX_BATT_TEMP); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL, + WM831X_AUX_BATT_TEMP); + +static struct attribute *wm831x_attributes[] = { + &dev_attr_name.attr, + + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + + NULL +}; + +static const struct attribute_group wm831x_attr_group = { + .attrs = wm831x_attributes, +}; + +static int __devinit wm831x_hwmon_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_hwmon *hwmon; + int ret; + + hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + hwmon->wm831x = wm831x; + + ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group); + if (ret) + goto err; + + hwmon->classdev = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon->classdev)) { + ret = PTR_ERR(hwmon->classdev); + goto err_sysfs; + } + + platform_set_drvdata(pdev, hwmon); + + return 0; + +err_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group); +err: + kfree(hwmon); + return ret; +} + +static int __devexit wm831x_hwmon_remove(struct platform_device *pdev) +{ + struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev); + + hwmon_device_unregister(hwmon->classdev); + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group); + platform_set_drvdata(pdev, NULL); + kfree(hwmon); + + return 0; +} + +static struct platform_driver wm831x_hwmon_driver = { + .probe = wm831x_hwmon_probe, + .remove = __devexit_p(wm831x_hwmon_remove), + .driver = { + .name = "wm831x-hwmon", + .owner = THIS_MODULE, + }, +}; + +static int __init wm831x_hwmon_init(void) +{ + return platform_driver_register(&wm831x_hwmon_driver); +} +module_init(wm831x_hwmon_init); + +static void __exit wm831x_hwmon_exit(void) +{ + platform_driver_unregister(&wm831x_hwmon_driver); +} +module_exit(wm831x_hwmon_exit); + +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("WM831x Hardware Monitoring"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-hwmon"); -- cgit v1.2.3-70-g09d2 From 3209e70e5ed1821be8d9b87fe9e8bd6cffa4b4c7 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 2 Jul 2009 23:27:12 +0800 Subject: MIPS: Loongson: Add a machtype kernel command line argument The difference between some loongson-based machines is very small, so, if there is no necessary to add new kernel config options to cope with this difference, it will be better to share the same kernel image file between them, benefit from this, the linux distribution developers only have a need to compile the kernel one time. This machtype kernel command line argument will be used later to share the same kernel image file between two different machines(menglong & yeeloong) made by lemote. Thanks very much to Zhang Le for cleaning up the machtype implementation. Signed-off-by: Wu Zhangjin Signed-off-by: Ralf Baechle --- Documentation/kernel-parameters.txt | 4 +++ arch/mips/include/asm/bootinfo.h | 12 +++++++++ arch/mips/include/asm/mach-loongson/machine.h | 2 +- arch/mips/loongson/common/Makefile | 2 +- arch/mips/loongson/common/machtype.c | 35 ++++++++++++++++++++++++++- arch/mips/loongson/fuloong-2e/Makefile | 2 +- 6 files changed, 53 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4c12a290bee..f45d0d8e71d 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1286,6 +1286,10 @@ and is between 256 and 4096 characters. It is defined in the file (machvec) in a generic kernel. Example: machvec=hpzx1_swiotlb + machtype= [Loongson] Share the same kernel image file between different + yeeloong laptop. + Example: machtype=lemote-yeeloong-2f-7inch + max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater than or equal to this physical address is ignored. diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index 610fe3af7a0..f5dfaf6a160 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -7,6 +7,7 @@ * Copyright (C) 1995, 1996 Andreas Busse * Copyright (C) 1995, 1996 Stoned Elipot * Copyright (C) 1995, 1996 Paul M. Antoine. + * Copyright (C) 2009 Zhang Le */ #ifndef _ASM_BOOTINFO_H #define _ASM_BOOTINFO_H @@ -57,6 +58,17 @@ #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ +/* + * Valid machtype for Loongson family + */ +#define MACH_LOONGSON_UNKNOWN 0 +#define MACH_LEMOTE_FL2E 1 +#define MACH_LEMOTE_FL2F 2 +#define MACH_LEMOTE_ML2F7 3 +#define MACH_LEMOTE_YL2F89 4 +#define MACH_DEXXON_GDIUM2F10 5 +#define MACH_LOONGSON_END 6 + #define CL_SIZE COMMAND_LINE_SIZE extern char *system_type; diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h index 8e60d363594..206ea206791 100644 --- a/arch/mips/include/asm/mach-loongson/machine.h +++ b/arch/mips/include/asm/mach-loongson/machine.h @@ -15,7 +15,7 @@ #define LOONGSON_UART_BASE (BONITO_PCIIO_BASE + 0x3f8) -#define LOONGSON_MACHNAME "lemote-fuloong-2e-box" +#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E #endif diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index 4e3889dec39..656b3cc0a2a 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -3,7 +3,7 @@ # obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ - pci.o bonito-irq.o mem.o + pci.o bonito-irq.o mem.o machtype.o # # Early printk support diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c index 845b3fb47e0..7b348248de7 100644 --- a/arch/mips/loongson/common/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -2,16 +2,49 @@ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology * Author: Wu Zhangjin, wuzj@lemote.com * + * Copyright (c) 2009 Zhang Le + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ +#include +#include +#include #include +static const char *system_types[] = { + [MACH_LOONGSON_UNKNOWN] "unknown loongson machine", + [MACH_LEMOTE_FL2E] "lemote-fuloong-2e-box", + [MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box", + [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches", + [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", + [MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches", + [MACH_LOONGSON_END] NULL, +}; + const char *get_system_type(void) { - return LOONGSON_MACHNAME; + if (mips_machtype == MACH_UNKNOWN) + mips_machtype = LOONGSON_MACHTYPE; + + return system_types[mips_machtype]; } +static __init int machtype_setup(char *str) +{ + int machtype = MACH_LEMOTE_FL2E; + + if (!str) + return -EINVAL; + + for (; system_types[machtype]; machtype++) + if (strstr(system_types[machtype], str)) { + mips_machtype = machtype; + break; + } + return 0; +} +__setup("machtype=", machtype_setup); diff --git a/arch/mips/loongson/fuloong-2e/Makefile b/arch/mips/loongson/fuloong-2e/Makefile index 96e45c13c85..3aba5fcc09d 100644 --- a/arch/mips/loongson/fuloong-2e/Makefile +++ b/arch/mips/loongson/fuloong-2e/Makefile @@ -2,6 +2,6 @@ # Makefile for Lemote Fuloong2e mini-PC board. # -obj-y += irq.o reset.o machtype.o +obj-y += irq.o reset.o EXTRA_CFLAGS += -Werror -- cgit v1.2.3-70-g09d2 From 1358870deaf11a752a84fbd89201749aa62498e8 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 18 Sep 2009 12:22:29 -0400 Subject: ext4: Update documentation about quota mount options Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- Documentation/filesystems/ext4.txt | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 3e329dbac78..18b5ec8cea4 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -257,10 +257,18 @@ resuid=n The user ID which may use the reserved blocks. sb=n Use alternate superblock at this location. -quota -noquota -grpquota -usrquota +quota These options are ignored by the filesystem. They +noquota are used only by quota tools to recognize volumes +grpquota where quota should be turned on. See documentation +usrquota in the quota-tools package for more details + (http://sourceforge.net/projects/linuxquota). + +jqfmt= These options tell filesystem details about quota +usrjquota= so that quota information can be properly updated +grpjquota= during journal replay. They replace the above + quota options. See documentation in the quota-tools + package for more details + (http://sourceforge.net/projects/linuxquota). bh (*) ext4 associates buffer heads to data pages to nobh (a) cache disk block mapping information -- cgit v1.2.3-70-g09d2 From 8f1ecc9fbc5b223e4f5d5bb8bcd6f5672c4bc4b6 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 17 Sep 2009 19:26:04 -0700 Subject: kref: double kref_put() in my_data_handler() The kref_put() already occurs after the out label Signed-off-by: Roel Kluin Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/kref.txt | 1 - 1 file changed, 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/kref.txt b/Documentation/kref.txt index 130b6e87aa7..ae203f91ee9 100644 --- a/Documentation/kref.txt +++ b/Documentation/kref.txt @@ -84,7 +84,6 @@ int my_data_handler(void) task = kthread_run(more_data_handling, data, "more_data_handling"); if (task == ERR_PTR(-ENOMEM)) { rv = -ENOMEM; - kref_put(&data->refcount, data_release); goto out; } -- cgit v1.2.3-70-g09d2 From 6423133bdee0e07d1c2f8411cb3fe676c207ba33 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 17 Sep 2009 19:26:53 -0700 Subject: kernel-doc: allow multi-line declaration purpose descriptions Allow the short description after symbol name and dash in a kernel-doc comment to span multiple lines, e.g. like this: /** * unmap_mapping_range - unmap the portion of all mmaps in the * specified address_space corresponding to the specified * page range in the underlying file. * @mapping: the address space containing mmaps to be unmapped. * ... */ The short description ends with a parameter description, an empty line or the end of the comment block. Signed-off-by: Johannes Weiner Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/kernel-doc-nano-HOWTO.txt | 4 +++- scripts/kernel-doc | 21 ++++++++++++++++----- 2 files changed, 19 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt index 4d04572b654..348b9e5e28f 100644 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ b/Documentation/kernel-doc-nano-HOWTO.txt @@ -66,7 +66,9 @@ Example kernel-doc function comment: * The longer description can have multiple paragraphs. */ -The first line, with the short description, must be on a single line. +The short description following the subject can span multiple lines +and ends with an @argument description, an empty line or the end of +the comment block. The @argument descriptions must begin on the very next line following this opening short function description line, with no intervening diff --git a/scripts/kernel-doc b/scripts/kernel-doc index b52d340d759..ea9f8a58678 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -1995,6 +1995,7 @@ sub process_file($) { my $identifier; my $func; my $descr; + my $in_purpose = 0; my $initial_section_counter = $section_counter; if (defined($ENV{'SRCTREE'})) { @@ -2044,6 +2045,7 @@ sub process_file($) { $descr =~ s/\s*$//; $descr =~ s/\s+/ /; $declaration_purpose = xml_escape($descr); + $in_purpose = 1; } else { $declaration_purpose = ""; } @@ -2090,6 +2092,7 @@ sub process_file($) { } $in_doc_sect = 1; + $in_purpose = 0; $contents = $newcontents; if ($contents ne "") { while ((substr($contents, 0, 1) eq " ") || @@ -2119,11 +2122,19 @@ sub process_file($) { } elsif (/$doc_content/) { # miguel-style comment kludge, look for blank lines after # @parameter line to signify start of description - if ($1 eq "" && - ($section =~ m/^@/ || $section eq $section_context)) { - dump_section($file, $section, xml_escape($contents)); - $section = $section_default; - $contents = ""; + if ($1 eq "") { + if ($section =~ m/^@/ || $section eq $section_context) { + dump_section($file, $section, xml_escape($contents)); + $section = $section_default; + $contents = ""; + } else { + $contents .= "\n"; + } + $in_purpose = 0; + } elsif ($in_purpose == 1) { + # Continued declaration purpose + chomp($declaration_purpose); + $declaration_purpose .= " " . xml_escape($1); } else { $contents .= $1 . "\n"; } -- cgit v1.2.3-70-g09d2 From fc5377668c3d808e1d53c4aee152c836f55c3490 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 17 Sep 2009 19:35:28 +0200 Subject: tracing: Remove markers Now that the last users of markers have migrated to the event tracer we can kill off the (now orphan) support code. Signed-off-by: Christoph Hellwig Acked-by: Mathieu Desnoyers Cc: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20090917173527.GA1699@lst.de> Signed-off-by: Ingo Molnar --- Documentation/markers.txt | 104 ---- arch/powerpc/platforms/cell/spufs/file.c | 1 - arch/powerpc/platforms/cell/spufs/sched.c | 1 - include/linux/kvm_host.h | 1 - include/linux/marker.h | 221 ------- include/linux/module.h | 11 - init/Kconfig | 7 - kernel/Makefile | 1 - kernel/marker.c | 930 ------------------------------ kernel/module.c | 18 - kernel/trace/trace_printk.c | 1 - samples/Kconfig | 6 - samples/Makefile | 2 +- samples/markers/Makefile | 4 - samples/markers/marker-example.c | 53 -- samples/markers/probe-example.c | 92 --- scripts/Makefile.modpost | 12 - 17 files changed, 1 insertion(+), 1464 deletions(-) delete mode 100644 Documentation/markers.txt delete mode 100644 include/linux/marker.h delete mode 100644 kernel/marker.c delete mode 100644 samples/markers/Makefile delete mode 100644 samples/markers/marker-example.c delete mode 100644 samples/markers/probe-example.c (limited to 'Documentation') diff --git a/Documentation/markers.txt b/Documentation/markers.txt deleted file mode 100644 index d2b3d0e91b2..00000000000 --- a/Documentation/markers.txt +++ /dev/null @@ -1,104 +0,0 @@ - Using the Linux Kernel Markers - - Mathieu Desnoyers - - -This document introduces Linux Kernel Markers and their use. It provides -examples of how to insert markers in the kernel and connect probe functions to -them and provides some examples of probe functions. - - -* Purpose of markers - -A marker placed in code provides a hook to call a function (probe) that you can -provide at runtime. A marker can be "on" (a probe is connected to it) or "off" -(no probe is attached). When a marker is "off" it has no effect, except for -adding a tiny time penalty (checking a condition for a branch) and space -penalty (adding a few bytes for the function call at the end of the -instrumented function and adds a data structure in a separate section). When a -marker is "on", the function you provide is called each time the marker is -executed, in the execution context of the caller. When the function provided -ends its execution, it returns to the caller (continuing from the marker site). - -You can put markers at important locations in the code. Markers are -lightweight hooks that can pass an arbitrary number of parameters, -described in a printk-like format string, to the attached probe function. - -They can be used for tracing and performance accounting. - - -* Usage - -In order to use the macro trace_mark, you should include linux/marker.h. - -#include - -And, - -trace_mark(subsystem_event, "myint %d mystring %s", someint, somestring); -Where : -- subsystem_event is an identifier unique to your event - - subsystem is the name of your subsystem. - - event is the name of the event to mark. -- "myint %d mystring %s" is the formatted string for the serializer. "myint" and - "mystring" are repectively the field names associated with the first and - second parameter. -- someint is an integer. -- somestring is a char pointer. - -Connecting a function (probe) to a marker is done by providing a probe (function -to call) for the specific marker through marker_probe_register() and can be -activated by calling marker_arm(). Marker deactivation can be done by calling -marker_disarm() as many times as marker_arm() has been called. Removing a probe -is done through marker_probe_unregister(); it will disarm the probe. - -marker_synchronize_unregister() must be called between probe unregistration and -the first occurrence of -- the end of module exit function, - to make sure there is no caller left using the probe; -- the free of any resource used by the probes, - to make sure the probes wont be accessing invalid data. -This, and the fact that preemption is disabled around the probe call, make sure -that probe removal and module unload are safe. See the "Probe example" section -below for a sample probe module. - -The marker mechanism supports inserting multiple instances of the same marker. -Markers can be put in inline functions, inlined static functions, and -unrolled loops as well as regular functions. - -The naming scheme "subsystem_event" is suggested here as a convention intended -to limit collisions. Marker names are global to the kernel: they are considered -as being the same whether they are in the core kernel image or in modules. -Conflicting format strings for markers with the same name will cause the markers -to be detected to have a different format string not to be armed and will output -a printk warning which identifies the inconsistency: - -"Format mismatch for probe probe_name (format), marker (format)" - -Another way to use markers is to simply define the marker without generating any -function call to actually call into the marker. This is useful in combination -with tracepoint probes in a scheme like this : - -void probe_tracepoint_name(unsigned int arg1, struct task_struct *tsk); - -DEFINE_MARKER_TP(marker_eventname, tracepoint_name, probe_tracepoint_name, - "arg1 %u pid %d"); - -notrace void probe_tracepoint_name(unsigned int arg1, struct task_struct *tsk) -{ - struct marker *marker = &GET_MARKER(kernel_irq_entry); - /* write data to trace buffers ... */ -} - -* Probe / marker example - -See the example provided in samples/markers/src - -Compile them with your kernel. - -Run, as root : -modprobe marker-example (insmod order is not important) -modprobe probe-example -cat /proc/marker-example (returns an expected error) -rmmod marker-example probe-example -dmesg diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index ab8aef9bb8e..8f079b865ad 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index bb5b77c66d0..4678078fede 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 4af56036a6b..b7bbb5ddd7a 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -15,7 +15,6 @@ #include #include #include -#include #include #include diff --git a/include/linux/marker.h b/include/linux/marker.h deleted file mode 100644 index b85e74ca782..00000000000 --- a/include/linux/marker.h +++ /dev/null @@ -1,221 +0,0 @@ -#ifndef _LINUX_MARKER_H -#define _LINUX_MARKER_H - -/* - * Code markup for dynamic and static tracing. - * - * See Documentation/marker.txt. - * - * (C) Copyright 2006 Mathieu Desnoyers - * - * This file is released under the GPLv2. - * See the file COPYING for more details. - */ - -#include -#include - -struct module; -struct marker; - -/** - * marker_probe_func - Type of a marker probe function - * @probe_private: probe private data - * @call_private: call site private data - * @fmt: format string - * @args: variable argument list pointer. Use a pointer to overcome C's - * inability to pass this around as a pointer in a portable manner in - * the callee otherwise. - * - * Type of marker probe functions. They receive the mdata and need to parse the - * format string to recover the variable argument list. - */ -typedef void marker_probe_func(void *probe_private, void *call_private, - const char *fmt, va_list *args); - -struct marker_probe_closure { - marker_probe_func *func; /* Callback */ - void *probe_private; /* Private probe data */ -}; - -struct marker { - const char *name; /* Marker name */ - const char *format; /* Marker format string, describing the - * variable argument list. - */ - char state; /* Marker state. */ - char ptype; /* probe type : 0 : single, 1 : multi */ - /* Probe wrapper */ - void (*call)(const struct marker *mdata, void *call_private, ...); - struct marker_probe_closure single; - struct marker_probe_closure *multi; - const char *tp_name; /* Optional tracepoint name */ - void *tp_cb; /* Optional tracepoint callback */ -} __attribute__((aligned(8))); - -#ifdef CONFIG_MARKERS - -#define _DEFINE_MARKER(name, tp_name_str, tp_cb, format) \ - static const char __mstrtab_##name[] \ - __attribute__((section("__markers_strings"))) \ - = #name "\0" format; \ - static struct marker __mark_##name \ - __attribute__((section("__markers"), aligned(8))) = \ - { __mstrtab_##name, &__mstrtab_##name[sizeof(#name)], \ - 0, 0, marker_probe_cb, { __mark_empty_function, NULL},\ - NULL, tp_name_str, tp_cb } - -#define DEFINE_MARKER(name, format) \ - _DEFINE_MARKER(name, NULL, NULL, format) - -#define DEFINE_MARKER_TP(name, tp_name, tp_cb, format) \ - _DEFINE_MARKER(name, #tp_name, tp_cb, format) - -/* - * Note : the empty asm volatile with read constraint is used here instead of a - * "used" attribute to fix a gcc 4.1.x bug. - * Make sure the alignment of the structure in the __markers section will - * not add unwanted padding between the beginning of the section and the - * structure. Force alignment to the same alignment as the section start. - * - * The "generic" argument controls which marker enabling mechanism must be used. - * If generic is true, a variable read is used. - * If generic is false, immediate values are used. - */ -#define __trace_mark(generic, name, call_private, format, args...) \ - do { \ - DEFINE_MARKER(name, format); \ - __mark_check_format(format, ## args); \ - if (unlikely(__mark_##name.state)) { \ - (*__mark_##name.call) \ - (&__mark_##name, call_private, ## args);\ - } \ - } while (0) - -#define __trace_mark_tp(name, call_private, tp_name, tp_cb, format, args...) \ - do { \ - void __check_tp_type(void) \ - { \ - register_trace_##tp_name(tp_cb); \ - } \ - DEFINE_MARKER_TP(name, tp_name, tp_cb, format); \ - __mark_check_format(format, ## args); \ - (*__mark_##name.call)(&__mark_##name, call_private, \ - ## args); \ - } while (0) - -extern void marker_update_probe_range(struct marker *begin, - struct marker *end); - -#define GET_MARKER(name) (__mark_##name) - -#else /* !CONFIG_MARKERS */ -#define DEFINE_MARKER(name, tp_name, tp_cb, format) -#define __trace_mark(generic, name, call_private, format, args...) \ - __mark_check_format(format, ## args) -#define __trace_mark_tp(name, call_private, tp_name, tp_cb, format, args...) \ - do { \ - void __check_tp_type(void) \ - { \ - register_trace_##tp_name(tp_cb); \ - } \ - __mark_check_format(format, ## args); \ - } while (0) -static inline void marker_update_probe_range(struct marker *begin, - struct marker *end) -{ } -#define GET_MARKER(name) -#endif /* CONFIG_MARKERS */ - -/** - * trace_mark - Marker using code patching - * @name: marker name, not quoted. - * @format: format string - * @args...: variable argument list - * - * Places a marker using optimized code patching technique (imv_read()) - * to be enabled when immediate values are present. - */ -#define trace_mark(name, format, args...) \ - __trace_mark(0, name, NULL, format, ## args) - -/** - * _trace_mark - Marker using variable read - * @name: marker name, not quoted. - * @format: format string - * @args...: variable argument list - * - * Places a marker using a standard memory read (_imv_read()) to be - * enabled. Should be used for markers in code paths where instruction - * modification based enabling is not welcome. (__init and __exit functions, - * lockdep, some traps, printk). - */ -#define _trace_mark(name, format, args...) \ - __trace_mark(1, name, NULL, format, ## args) - -/** - * trace_mark_tp - Marker in a tracepoint callback - * @name: marker name, not quoted. - * @tp_name: tracepoint name, not quoted. - * @tp_cb: tracepoint callback. Should have an associated global symbol so it - * is not optimized away by the compiler (should not be static). - * @format: format string - * @args...: variable argument list - * - * Places a marker in a tracepoint callback. - */ -#define trace_mark_tp(name, tp_name, tp_cb, format, args...) \ - __trace_mark_tp(name, NULL, tp_name, tp_cb, format, ## args) - -/** - * MARK_NOARGS - Format string for a marker with no argument. - */ -#define MARK_NOARGS " " - -/* To be used for string format validity checking with gcc */ -static inline void __printf(1, 2) ___mark_check_format(const char *fmt, ...) -{ -} - -#define __mark_check_format(format, args...) \ - do { \ - if (0) \ - ___mark_check_format(format, ## args); \ - } while (0) - -extern marker_probe_func __mark_empty_function; - -extern void marker_probe_cb(const struct marker *mdata, - void *call_private, ...); - -/* - * Connect a probe to a marker. - * private data pointer must be a valid allocated memory address, or NULL. - */ -extern int marker_probe_register(const char *name, const char *format, - marker_probe_func *probe, void *probe_private); - -/* - * Returns the private data given to marker_probe_register. - */ -extern int marker_probe_unregister(const char *name, - marker_probe_func *probe, void *probe_private); -/* - * Unregister a marker by providing the registered private data. - */ -extern int marker_probe_unregister_private_data(marker_probe_func *probe, - void *probe_private); - -extern void *marker_get_private_data(const char *name, marker_probe_func *probe, - int num); - -/* - * marker_synchronize_unregister must be called between the last marker probe - * unregistration and the first one of - * - the end of module exit function - * - the free of any resource used by the probes - * to ensure the code and data are valid for any possibly running probes. - */ -#define marker_synchronize_unregister() synchronize_sched() - -#endif diff --git a/include/linux/module.h b/include/linux/module.h index f8f92d015ef..1c755b2f937 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -15,7 +15,6 @@ #include #include #include -#include #include #include @@ -327,10 +326,6 @@ struct module /* The command line arguments (may be mangled). People like keeping pointers to this stuff */ char *args; -#ifdef CONFIG_MARKERS - struct marker *markers; - unsigned int num_markers; -#endif #ifdef CONFIG_TRACEPOINTS struct tracepoint *tracepoints; unsigned int num_tracepoints; @@ -535,8 +530,6 @@ int unregister_module_notifier(struct notifier_block * nb); extern void print_modules(void); -extern void module_update_markers(void); - extern void module_update_tracepoints(void); extern int module_get_iter_tracepoints(struct tracepoint_iter *iter); @@ -651,10 +644,6 @@ static inline void print_modules(void) { } -static inline void module_update_markers(void) -{ -} - static inline void module_update_tracepoints(void) { } diff --git a/init/Kconfig b/init/Kconfig index 8e8b76d8a27..4cc0fa13d5e 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1054,13 +1054,6 @@ config PROFILING config TRACEPOINTS bool -config MARKERS - bool "Activate markers" - select TRACEPOINTS - help - Place an empty function call at each marker site. Can be - dynamically changed for a probe function. - source "arch/Kconfig" config SLOW_WORK diff --git a/kernel/Makefile b/kernel/Makefile index 3d9c7e27e3f..7c9b0a58550 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -87,7 +87,6 @@ obj-$(CONFIG_RELAY) += relay.o obj-$(CONFIG_SYSCTL) += utsname_sysctl.o obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o -obj-$(CONFIG_MARKERS) += marker.o obj-$(CONFIG_TRACEPOINTS) += tracepoint.o obj-$(CONFIG_LATENCYTOP) += latencytop.o obj-$(CONFIG_FUNCTION_TRACER) += trace/ diff --git a/kernel/marker.c b/kernel/marker.c deleted file mode 100644 index ea54f264786..00000000000 --- a/kernel/marker.c +++ /dev/null @@ -1,930 +0,0 @@ -/* - * Copyright (C) 2007 Mathieu Desnoyers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -extern struct marker __start___markers[]; -extern struct marker __stop___markers[]; - -/* Set to 1 to enable marker debug output */ -static const int marker_debug; - -/* - * markers_mutex nests inside module_mutex. Markers mutex protects the builtin - * and module markers and the hash table. - */ -static DEFINE_MUTEX(markers_mutex); - -/* - * Marker hash table, containing the active markers. - * Protected by module_mutex. - */ -#define MARKER_HASH_BITS 6 -#define MARKER_TABLE_SIZE (1 << MARKER_HASH_BITS) -static struct hlist_head marker_table[MARKER_TABLE_SIZE]; - -/* - * Note about RCU : - * It is used to make sure every handler has finished using its private data - * between two consecutive operation (add or remove) on a given marker. It is - * also used to delay the free of multiple probes array until a quiescent state - * is reached. - * marker entries modifications are protected by the markers_mutex. - */ -struct marker_entry { - struct hlist_node hlist; - char *format; - /* Probe wrapper */ - void (*call)(const struct marker *mdata, void *call_private, ...); - struct marker_probe_closure single; - struct marker_probe_closure *multi; - int refcount; /* Number of times armed. 0 if disarmed. */ - struct rcu_head rcu; - void *oldptr; - int rcu_pending; - unsigned char ptype:1; - unsigned char format_allocated:1; - char name[0]; /* Contains name'\0'format'\0' */ -}; - -/** - * __mark_empty_function - Empty probe callback - * @probe_private: probe private data - * @call_private: call site private data - * @fmt: format string - * @...: variable argument list - * - * Empty callback provided as a probe to the markers. By providing this to a - * disabled marker, we make sure the execution flow is always valid even - * though the function pointer change and the marker enabling are two distinct - * operations that modifies the execution flow of preemptible code. - */ -notrace void __mark_empty_function(void *probe_private, void *call_private, - const char *fmt, va_list *args) -{ -} -EXPORT_SYMBOL_GPL(__mark_empty_function); - -/* - * marker_probe_cb Callback that prepares the variable argument list for probes. - * @mdata: pointer of type struct marker - * @call_private: caller site private data - * @...: Variable argument list. - * - * Since we do not use "typical" pointer based RCU in the 1 argument case, we - * need to put a full smp_rmb() in this branch. This is why we do not use - * rcu_dereference() for the pointer read. - */ -notrace void marker_probe_cb(const struct marker *mdata, - void *call_private, ...) -{ - va_list args; - char ptype; - - /* - * rcu_read_lock_sched does two things : disabling preemption to make - * sure the teardown of the callbacks can be done correctly when they - * are in modules and they insure RCU read coherency. - */ - rcu_read_lock_sched_notrace(); - ptype = mdata->ptype; - if (likely(!ptype)) { - marker_probe_func *func; - /* Must read the ptype before ptr. They are not data dependant, - * so we put an explicit smp_rmb() here. */ - smp_rmb(); - func = mdata->single.func; - /* Must read the ptr before private data. They are not data - * dependant, so we put an explicit smp_rmb() here. */ - smp_rmb(); - va_start(args, call_private); - func(mdata->single.probe_private, call_private, mdata->format, - &args); - va_end(args); - } else { - struct marker_probe_closure *multi; - int i; - /* - * Read mdata->ptype before mdata->multi. - */ - smp_rmb(); - multi = mdata->multi; - /* - * multi points to an array, therefore accessing the array - * depends on reading multi. However, even in this case, - * we must insure that the pointer is read _before_ the array - * data. Same as rcu_dereference, but we need a full smp_rmb() - * in the fast path, so put the explicit barrier here. - */ - smp_read_barrier_depends(); - for (i = 0; multi[i].func; i++) { - va_start(args, call_private); - multi[i].func(multi[i].probe_private, call_private, - mdata->format, &args); - va_end(args); - } - } - rcu_read_unlock_sched_notrace(); -} -EXPORT_SYMBOL_GPL(marker_probe_cb); - -/* - * marker_probe_cb Callback that does not prepare the variable argument list. - * @mdata: pointer of type struct marker - * @call_private: caller site private data - * @...: Variable argument list. - * - * Should be connected to markers "MARK_NOARGS". - */ -static notrace void marker_probe_cb_noarg(const struct marker *mdata, - void *call_private, ...) -{ - va_list args; /* not initialized */ - char ptype; - - rcu_read_lock_sched_notrace(); - ptype = mdata->ptype; - if (likely(!ptype)) { - marker_probe_func *func; - /* Must read the ptype before ptr. They are not data dependant, - * so we put an explicit smp_rmb() here. */ - smp_rmb(); - func = mdata->single.func; - /* Must read the ptr before private data. They are not data - * dependant, so we put an explicit smp_rmb() here. */ - smp_rmb(); - func(mdata->single.probe_private, call_private, mdata->format, - &args); - } else { - struct marker_probe_closure *multi; - int i; - /* - * Read mdata->ptype before mdata->multi. - */ - smp_rmb(); - multi = mdata->multi; - /* - * multi points to an array, therefore accessing the array - * depends on reading multi. However, even in this case, - * we must insure that the pointer is read _before_ the array - * data. Same as rcu_dereference, but we need a full smp_rmb() - * in the fast path, so put the explicit barrier here. - */ - smp_read_barrier_depends(); - for (i = 0; multi[i].func; i++) - multi[i].func(multi[i].probe_private, call_private, - mdata->format, &args); - } - rcu_read_unlock_sched_notrace(); -} - -static void free_old_closure(struct rcu_head *head) -{ - struct marker_entry *entry = container_of(head, - struct marker_entry, rcu); - kfree(entry->oldptr); - /* Make sure we free the data before setting the pending flag to 0 */ - smp_wmb(); - entry->rcu_pending = 0; -} - -static void debug_print_probes(struct marker_entry *entry) -{ - int i; - - if (!marker_debug) - return; - - if (!entry->ptype) { - printk(KERN_DEBUG "Single probe : %p %p\n", - entry->single.func, - entry->single.probe_private); - } else { - for (i = 0; entry->multi[i].func; i++) - printk(KERN_DEBUG "Multi probe %d : %p %p\n", i, - entry->multi[i].func, - entry->multi[i].probe_private); - } -} - -static struct marker_probe_closure * -marker_entry_add_probe(struct marker_entry *entry, - marker_probe_func *probe, void *probe_private) -{ - int nr_probes = 0; - struct marker_probe_closure *old, *new; - - WARN_ON(!probe); - - debug_print_probes(entry); - old = entry->multi; - if (!entry->ptype) { - if (entry->single.func == probe && - entry->single.probe_private == probe_private) - return ERR_PTR(-EBUSY); - if (entry->single.func == __mark_empty_function) { - /* 0 -> 1 probes */ - entry->single.func = probe; - entry->single.probe_private = probe_private; - entry->refcount = 1; - entry->ptype = 0; - debug_print_probes(entry); - return NULL; - } else { - /* 1 -> 2 probes */ - nr_probes = 1; - old = NULL; - } - } else { - /* (N -> N+1), (N != 0, 1) probes */ - for (nr_probes = 0; old[nr_probes].func; nr_probes++) - if (old[nr_probes].func == probe - && old[nr_probes].probe_private - == probe_private) - return ERR_PTR(-EBUSY); - } - /* + 2 : one for new probe, one for NULL func */ - new = kzalloc((nr_probes + 2) * sizeof(struct marker_probe_closure), - GFP_KERNEL); - if (new == NULL) - return ERR_PTR(-ENOMEM); - if (!old) - new[0] = entry->single; - else - memcpy(new, old, - nr_probes * sizeof(struct marker_probe_closure)); - new[nr_probes].func = probe; - new[nr_probes].probe_private = probe_private; - entry->refcount = nr_probes + 1; - entry->multi = new; - entry->ptype = 1; - debug_print_probes(entry); - return old; -} - -static struct marker_probe_closure * -marker_entry_remove_probe(struct marker_entry *entry, - marker_probe_func *probe, void *probe_private) -{ - int nr_probes = 0, nr_del = 0, i; - struct marker_probe_closure *old, *new; - - old = entry->multi; - - debug_print_probes(entry); - if (!entry->ptype) { - /* 0 -> N is an error */ - WARN_ON(entry->single.func == __mark_empty_function); - /* 1 -> 0 probes */ - WARN_ON(probe && entry->single.func != probe); - WARN_ON(entry->single.probe_private != probe_private); - entry->single.func = __mark_empty_function; - entry->refcount = 0; - entry->ptype = 0; - debug_print_probes(entry); - return NULL; - } else { - /* (N -> M), (N > 1, M >= 0) probes */ - for (nr_probes = 0; old[nr_probes].func; nr_probes++) { - if ((!probe || old[nr_probes].func == probe) - && old[nr_probes].probe_private - == probe_private) - nr_del++; - } - } - - if (nr_probes - nr_del == 0) { - /* N -> 0, (N > 1) */ - entry->single.func = __mark_empty_function; - entry->refcount = 0; - entry->ptype = 0; - } else if (nr_probes - nr_del == 1) { - /* N -> 1, (N > 1) */ - for (i = 0; old[i].func; i++) - if ((probe && old[i].func != probe) || - old[i].probe_private != probe_private) - entry->single = old[i]; - entry->refcount = 1; - entry->ptype = 0; - } else { - int j = 0; - /* N -> M, (N > 1, M > 1) */ - /* + 1 for NULL */ - new = kzalloc((nr_probes - nr_del + 1) - * sizeof(struct marker_probe_closure), GFP_KERNEL); - if (new == NULL) - return ERR_PTR(-ENOMEM); - for (i = 0; old[i].func; i++) - if ((probe && old[i].func != probe) || - old[i].probe_private != probe_private) - new[j++] = old[i]; - entry->refcount = nr_probes - nr_del; - entry->ptype = 1; - entry->multi = new; - } - debug_print_probes(entry); - return old; -} - -/* - * Get marker if the marker is present in the marker hash table. - * Must be called with markers_mutex held. - * Returns NULL if not present. - */ -static struct marker_entry *get_marker(const char *name) -{ - struct hlist_head *head; - struct hlist_node *node; - struct marker_entry *e; - u32 hash = jhash(name, strlen(name), 0); - - head = &marker_table[hash & ((1 << MARKER_HASH_BITS)-1)]; - hlist_for_each_entry(e, node, head, hlist) { - if (!strcmp(name, e->name)) - return e; - } - return NULL; -} - -/* - * Add the marker to the marker hash table. Must be called with markers_mutex - * held. - */ -static struct marker_entry *add_marker(const char *name, const char *format) -{ - struct hlist_head *head; - struct hlist_node *node; - struct marker_entry *e; - size_t name_len = strlen(name) + 1; - size_t format_len = 0; - u32 hash = jhash(name, name_len-1, 0); - - if (format) - format_len = strlen(format) + 1; - head = &marker_table[hash & ((1 << MARKER_HASH_BITS)-1)]; - hlist_for_each_entry(e, node, head, hlist) { - if (!strcmp(name, e->name)) { - printk(KERN_NOTICE - "Marker %s busy\n", name); - return ERR_PTR(-EBUSY); /* Already there */ - } - } - /* - * Using kmalloc here to allocate a variable length element. Could - * cause some memory fragmentation if overused. - */ - e = kmalloc(sizeof(struct marker_entry) + name_len + format_len, - GFP_KERNEL); - if (!e) - return ERR_PTR(-ENOMEM); - memcpy(&e->name[0], name, name_len); - if (format) { - e->format = &e->name[name_len]; - memcpy(e->format, format, format_len); - if (strcmp(e->format, MARK_NOARGS) == 0) - e->call = marker_probe_cb_noarg; - else - e->call = marker_probe_cb; - trace_mark(core_marker_format, "name %s format %s", - e->name, e->format); - } else { - e->format = NULL; - e->call = marker_probe_cb; - } - e->single.func = __mark_empty_function; - e->single.probe_private = NULL; - e->multi = NULL; - e->ptype = 0; - e->format_allocated = 0; - e->refcount = 0; - e->rcu_pending = 0; - hlist_add_head(&e->hlist, head); - return e; -} - -/* - * Remove the marker from the marker hash table. Must be called with mutex_lock - * held. - */ -static int remove_marker(const char *name) -{ - struct hlist_head *head; - struct hlist_node *node; - struct marker_entry *e; - int found = 0; - size_t len = strlen(name) + 1; - u32 hash = jhash(name, len-1, 0); - - head = &marker_table[hash & ((1 << MARKER_HASH_BITS)-1)]; - hlist_for_each_entry(e, node, head, hlist) { - if (!strcmp(name, e->name)) { - found = 1; - break; - } - } - if (!found) - return -ENOENT; - if (e->single.func != __mark_empty_function) - return -EBUSY; - hlist_del(&e->hlist); - if (e->format_allocated) - kfree(e->format); - /* Make sure the call_rcu has been executed */ - if (e->rcu_pending) - rcu_barrier_sched(); - kfree(e); - return 0; -} - -/* - * Set the mark_entry format to the format found in the element. - */ -static int marker_set_format(struct marker_entry *entry, const char *format) -{ - entry->format = kstrdup(format, GFP_KERNEL); - if (!entry->format) - return -ENOMEM; - entry->format_allocated = 1; - - trace_mark(core_marker_format, "name %s format %s", - entry->name, entry->format); - return 0; -} - -/* - * Sets the probe callback corresponding to one marker. - */ -static int set_marker(struct marker_entry *entry, struct marker *elem, - int active) -{ - int ret = 0; - WARN_ON(strcmp(entry->name, elem->name) != 0); - - if (entry->format) { - if (strcmp(entry->format, elem->format) != 0) { - printk(KERN_NOTICE - "Format mismatch for probe %s " - "(%s), marker (%s)\n", - entry->name, - entry->format, - elem->format); - return -EPERM; - } - } else { - ret = marker_set_format(entry, elem->format); - if (ret) - return ret; - } - - /* - * probe_cb setup (statically known) is done here. It is - * asynchronous with the rest of execution, therefore we only - * pass from a "safe" callback (with argument) to an "unsafe" - * callback (does not set arguments). - */ - elem->call = entry->call; - /* - * Sanity check : - * We only update the single probe private data when the ptr is - * set to a _non_ single probe! (0 -> 1 and N -> 1, N != 1) - */ - WARN_ON(elem->single.func != __mark_empty_function - && elem->single.probe_private != entry->single.probe_private - && !elem->ptype); - elem->single.probe_private = entry->single.probe_private; - /* - * Make sure the private data is valid when we update the - * single probe ptr. - */ - smp_wmb(); - elem->single.func = entry->single.func; - /* - * We also make sure that the new probe callbacks array is consistent - * before setting a pointer to it. - */ - rcu_assign_pointer(elem->multi, entry->multi); - /* - * Update the function or multi probe array pointer before setting the - * ptype. - */ - smp_wmb(); - elem->ptype = entry->ptype; - - if (elem->tp_name && (active ^ elem->state)) { - WARN_ON(!elem->tp_cb); - /* - * It is ok to directly call the probe registration because type - * checking has been done in the __trace_mark_tp() macro. - */ - - if (active) { - /* - * try_module_get should always succeed because we hold - * lock_module() to get the tp_cb address. - */ - ret = try_module_get(__module_text_address( - (unsigned long)elem->tp_cb)); - BUG_ON(!ret); - ret = tracepoint_probe_register_noupdate( - elem->tp_name, - elem->tp_cb); - } else { - ret = tracepoint_probe_unregister_noupdate( - elem->tp_name, - elem->tp_cb); - /* - * tracepoint_probe_update_all() must be called - * before the module containing tp_cb is unloaded. - */ - module_put(__module_text_address( - (unsigned long)elem->tp_cb)); - } - } - elem->state = active; - - return ret; -} - -/* - * Disable a marker and its probe callback. - * Note: only waiting an RCU period after setting elem->call to the empty - * function insures that the original callback is not used anymore. This insured - * by rcu_read_lock_sched around the call site. - */ -static void disable_marker(struct marker *elem) -{ - int ret; - - /* leave "call" as is. It is known statically. */ - if (elem->tp_name && elem->state) { - WARN_ON(!elem->tp_cb); - /* - * It is ok to directly call the probe registration because type - * checking has been done in the __trace_mark_tp() macro. - */ - ret = tracepoint_probe_unregister_noupdate(elem->tp_name, - elem->tp_cb); - WARN_ON(ret); - /* - * tracepoint_probe_update_all() must be called - * before the module containing tp_cb is unloaded. - */ - module_put(__module_text_address((unsigned long)elem->tp_cb)); - } - elem->state = 0; - elem->single.func = __mark_empty_function; - /* Update the function before setting the ptype */ - smp_wmb(); - elem->ptype = 0; /* single probe */ - /* - * Leave the private data and id there, because removal is racy and - * should be done only after an RCU period. These are never used until - * the next initialization anyway. - */ -} - -/** - * marker_update_probe_range - Update a probe range - * @begin: beginning of the range - * @end: end of the range - * - * Updates the probe callback corresponding to a range of markers. - */ -void marker_update_probe_range(struct marker *begin, - struct marker *end) -{ - struct marker *iter; - struct marker_entry *mark_entry; - - mutex_lock(&markers_mutex); - for (iter = begin; iter < end; iter++) { - mark_entry = get_marker(iter->name); - if (mark_entry) { - set_marker(mark_entry, iter, !!mark_entry->refcount); - /* - * ignore error, continue - */ - } else { - disable_marker(iter); - } - } - mutex_unlock(&markers_mutex); -} - -/* - * Update probes, removing the faulty probes. - * - * Internal callback only changed before the first probe is connected to it. - * Single probe private data can only be changed on 0 -> 1 and 2 -> 1 - * transitions. All other transitions will leave the old private data valid. - * This makes the non-atomicity of the callback/private data updates valid. - * - * "special case" updates : - * 0 -> 1 callback - * 1 -> 0 callback - * 1 -> 2 callbacks - * 2 -> 1 callbacks - * Other updates all behave the same, just like the 2 -> 3 or 3 -> 2 updates. - * Site effect : marker_set_format may delete the marker entry (creating a - * replacement). - */ -static void marker_update_probes(void) -{ - /* Core kernel markers */ - marker_update_probe_range(__start___markers, __stop___markers); - /* Markers in modules. */ - module_update_markers(); - tracepoint_probe_update_all(); -} - -/** - * marker_probe_register - Connect a probe to a marker - * @name: marker name - * @format: format string - * @probe: probe handler - * @probe_private: probe private data - * - * private data must be a valid allocated memory address, or NULL. - * Returns 0 if ok, error value on error. - * The probe address must at least be aligned on the architecture pointer size. - */ -int marker_probe_register(const char *name, const char *format, - marker_probe_func *probe, void *probe_private) -{ - struct marker_entry *entry; - int ret = 0; - struct marker_probe_closure *old; - - mutex_lock(&markers_mutex); - entry = get_marker(name); - if (!entry) { - entry = add_marker(name, format); - if (IS_ERR(entry)) - ret = PTR_ERR(entry); - } else if (format) { - if (!entry->format) - ret = marker_set_format(entry, format); - else if (strcmp(entry->format, format)) - ret = -EPERM; - } - if (ret) - goto end; - - /* - * If we detect that a call_rcu is pending for this marker, - * make sure it's executed now. - */ - if (entry->rcu_pending) - rcu_barrier_sched(); - old = marker_entry_add_probe(entry, probe, probe_private); - if (IS_ERR(old)) { - ret = PTR_ERR(old); - goto end; - } - mutex_unlock(&markers_mutex); - marker_update_probes(); - mutex_lock(&markers_mutex); - entry = get_marker(name); - if (!entry) - goto end; - if (entry->rcu_pending) - rcu_barrier_sched(); - entry->oldptr = old; - entry->rcu_pending = 1; - /* write rcu_pending before calling the RCU callback */ - smp_wmb(); - call_rcu_sched(&entry->rcu, free_old_closure); -end: - mutex_unlock(&markers_mutex); - return ret; -} -EXPORT_SYMBOL_GPL(marker_probe_register); - -/** - * marker_probe_unregister - Disconnect a probe from a marker - * @name: marker name - * @probe: probe function pointer - * @probe_private: probe private data - * - * Returns the private data given to marker_probe_register, or an ERR_PTR(). - * We do not need to call a synchronize_sched to make sure the probes have - * finished running before doing a module unload, because the module unload - * itself uses stop_machine(), which insures that every preempt disabled section - * have finished. - */ -int marker_probe_unregister(const char *name, - marker_probe_func *probe, void *probe_private) -{ - struct marker_entry *entry; - struct marker_probe_closure *old; - int ret = -ENOENT; - - mutex_lock(&markers_mutex); - entry = get_marker(name); - if (!entry) - goto end; - if (entry->rcu_pending) - rcu_barrier_sched(); - old = marker_entry_remove_probe(entry, probe, probe_private); - mutex_unlock(&markers_mutex); - marker_update_probes(); - mutex_lock(&markers_mutex); - entry = get_marker(name); - if (!entry) - goto end; - if (entry->rcu_pending) - rcu_barrier_sched(); - entry->oldptr = old; - entry->rcu_pending = 1; - /* write rcu_pending before calling the RCU callback */ - smp_wmb(); - call_rcu_sched(&entry->rcu, free_old_closure); - remove_marker(name); /* Ignore busy error message */ - ret = 0; -end: - mutex_unlock(&markers_mutex); - return ret; -} -EXPORT_SYMBOL_GPL(marker_probe_unregister); - -static struct marker_entry * -get_marker_from_private_data(marker_probe_func *probe, void *probe_private) -{ - struct marker_entry *entry; - unsigned int i; - struct hlist_head *head; - struct hlist_node *node; - - for (i = 0; i < MARKER_TABLE_SIZE; i++) { - head = &marker_table[i]; - hlist_for_each_entry(entry, node, head, hlist) { - if (!entry->ptype) { - if (entry->single.func == probe - && entry->single.probe_private - == probe_private) - return entry; - } else { - struct marker_probe_closure *closure; - closure = entry->multi; - for (i = 0; closure[i].func; i++) { - if (closure[i].func == probe && - closure[i].probe_private - == probe_private) - return entry; - } - } - } - } - return NULL; -} - -/** - * marker_probe_unregister_private_data - Disconnect a probe from a marker - * @probe: probe function - * @probe_private: probe private data - * - * Unregister a probe by providing the registered private data. - * Only removes the first marker found in hash table. - * Return 0 on success or error value. - * We do not need to call a synchronize_sched to make sure the probes have - * finished running before doing a module unload, because the module unload - * itself uses stop_machine(), which insures that every preempt disabled section - * have finished. - */ -int marker_probe_unregister_private_data(marker_probe_func *probe, - void *probe_private) -{ - struct marker_entry *entry; - int ret = 0; - struct marker_probe_closure *old; - - mutex_lock(&markers_mutex); - entry = get_marker_from_private_data(probe, probe_private); - if (!entry) { - ret = -ENOENT; - goto end; - } - if (entry->rcu_pending) - rcu_barrier_sched(); - old = marker_entry_remove_probe(entry, NULL, probe_private); - mutex_unlock(&markers_mutex); - marker_update_probes(); - mutex_lock(&markers_mutex); - entry = get_marker_from_private_data(probe, probe_private); - if (!entry) - goto end; - if (entry->rcu_pending) - rcu_barrier_sched(); - entry->oldptr = old; - entry->rcu_pending = 1; - /* write rcu_pending before calling the RCU callback */ - smp_wmb(); - call_rcu_sched(&entry->rcu, free_old_closure); - remove_marker(entry->name); /* Ignore busy error message */ -end: - mutex_unlock(&markers_mutex); - return ret; -} -EXPORT_SYMBOL_GPL(marker_probe_unregister_private_data); - -/** - * marker_get_private_data - Get a marker's probe private data - * @name: marker name - * @probe: probe to match - * @num: get the nth matching probe's private data - * - * Returns the nth private data pointer (starting from 0) matching, or an - * ERR_PTR. - * Returns the private data pointer, or an ERR_PTR. - * The private data pointer should _only_ be dereferenced if the caller is the - * owner of the data, or its content could vanish. This is mostly used to - * confirm that a caller is the owner of a registered probe. - */ -void *marker_get_private_data(const char *name, marker_probe_func *probe, - int num) -{ - struct hlist_head *head; - struct hlist_node *node; - struct marker_entry *e; - size_t name_len = strlen(name) + 1; - u32 hash = jhash(name, name_len-1, 0); - int i; - - head = &marker_table[hash & ((1 << MARKER_HASH_BITS)-1)]; - hlist_for_each_entry(e, node, head, hlist) { - if (!strcmp(name, e->name)) { - if (!e->ptype) { - if (num == 0 && e->single.func == probe) - return e->single.probe_private; - } else { - struct marker_probe_closure *closure; - int match = 0; - closure = e->multi; - for (i = 0; closure[i].func; i++) { - if (closure[i].func != probe) - continue; - if (match++ == num) - return closure[i].probe_private; - } - } - break; - } - } - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL_GPL(marker_get_private_data); - -#ifdef CONFIG_MODULES - -int marker_module_notify(struct notifier_block *self, - unsigned long val, void *data) -{ - struct module *mod = data; - - switch (val) { - case MODULE_STATE_COMING: - marker_update_probe_range(mod->markers, - mod->markers + mod->num_markers); - break; - case MODULE_STATE_GOING: - marker_update_probe_range(mod->markers, - mod->markers + mod->num_markers); - break; - } - return 0; -} - -struct notifier_block marker_module_nb = { - .notifier_call = marker_module_notify, - .priority = 0, -}; - -static int init_markers(void) -{ - return register_module_notifier(&marker_module_nb); -} -__initcall(init_markers); - -#endif /* CONFIG_MODULES */ diff --git a/kernel/module.c b/kernel/module.c index 05ce49ced8f..b6ee424245d 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2237,10 +2237,6 @@ static noinline struct module *load_module(void __user *umod, sizeof(*mod->ctors), &mod->num_ctors); #endif -#ifdef CONFIG_MARKERS - mod->markers = section_objs(hdr, sechdrs, secstrings, "__markers", - sizeof(*mod->markers), &mod->num_markers); -#endif #ifdef CONFIG_TRACEPOINTS mod->tracepoints = section_objs(hdr, sechdrs, secstrings, "__tracepoints", @@ -2958,20 +2954,6 @@ void module_layout(struct module *mod, EXPORT_SYMBOL(module_layout); #endif -#ifdef CONFIG_MARKERS -void module_update_markers(void) -{ - struct module *mod; - - mutex_lock(&module_mutex); - list_for_each_entry(mod, &modules, list) - if (!mod->taints) - marker_update_probe_range(mod->markers, - mod->markers + mod->num_markers); - mutex_unlock(&module_mutex); -} -#endif - #ifdef CONFIG_TRACEPOINTS void module_update_tracepoints(void) { diff --git a/kernel/trace/trace_printk.c b/kernel/trace/trace_printk.c index 687699d365a..2547d8813cf 100644 --- a/kernel/trace/trace_printk.c +++ b/kernel/trace/trace_printk.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include diff --git a/samples/Kconfig b/samples/Kconfig index 428b065ba69..b92bde3c6a8 100644 --- a/samples/Kconfig +++ b/samples/Kconfig @@ -7,12 +7,6 @@ menuconfig SAMPLES if SAMPLES -config SAMPLE_MARKERS - tristate "Build markers examples -- loadable modules only" - depends on MARKERS && m - help - This build markers example modules. - config SAMPLE_TRACEPOINTS tristate "Build tracepoints examples -- loadable modules only" depends on TRACEPOINTS && m diff --git a/samples/Makefile b/samples/Makefile index 13e4b470b53..43343a03b1f 100644 --- a/samples/Makefile +++ b/samples/Makefile @@ -1,3 +1,3 @@ # Makefile for Linux samples code -obj-$(CONFIG_SAMPLES) += markers/ kobject/ kprobes/ tracepoints/ trace_events/ +obj-$(CONFIG_SAMPLES) += kobject/ kprobes/ tracepoints/ trace_events/ diff --git a/samples/markers/Makefile b/samples/markers/Makefile deleted file mode 100644 index 6d7231265f0..00000000000 --- a/samples/markers/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -# builds the kprobes example kernel modules; -# then to use one (as root): insmod - -obj-$(CONFIG_SAMPLE_MARKERS) += probe-example.o marker-example.o diff --git a/samples/markers/marker-example.c b/samples/markers/marker-example.c deleted file mode 100644 index e9cd9c0bc84..00000000000 --- a/samples/markers/marker-example.c +++ /dev/null @@ -1,53 +0,0 @@ -/* marker-example.c - * - * Executes a marker when /proc/marker-example is opened. - * - * (C) Copyright 2007 Mathieu Desnoyers - * - * This file is released under the GPLv2. - * See the file COPYING for more details. - */ - -#include -#include -#include -#include - -struct proc_dir_entry *pentry_example; - -static int my_open(struct inode *inode, struct file *file) -{ - int i; - - trace_mark(subsystem_event, "integer %d string %s", 123, - "example string"); - for (i = 0; i < 10; i++) - trace_mark(subsystem_eventb, MARK_NOARGS); - return -EPERM; -} - -static struct file_operations mark_ops = { - .open = my_open, -}; - -static int __init example_init(void) -{ - printk(KERN_ALERT "example init\n"); - pentry_example = proc_create("marker-example", 0444, NULL, &mark_ops); - if (!pentry_example) - return -EPERM; - return 0; -} - -static void __exit example_exit(void) -{ - printk(KERN_ALERT "example exit\n"); - remove_proc_entry("marker-example", NULL); -} - -module_init(example_init) -module_exit(example_exit) - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Mathieu Desnoyers"); -MODULE_DESCRIPTION("Marker example"); diff --git a/samples/markers/probe-example.c b/samples/markers/probe-example.c deleted file mode 100644 index 2dfb3b32937..00000000000 --- a/samples/markers/probe-example.c +++ /dev/null @@ -1,92 +0,0 @@ -/* probe-example.c - * - * Connects two functions to marker call sites. - * - * (C) Copyright 2007 Mathieu Desnoyers - * - * This file is released under the GPLv2. - * See the file COPYING for more details. - */ - -#include -#include -#include -#include -#include - -struct probe_data { - const char *name; - const char *format; - marker_probe_func *probe_func; -}; - -void probe_subsystem_event(void *probe_data, void *call_data, - const char *format, va_list *args) -{ - /* Declare args */ - unsigned int value; - const char *mystr; - - /* Assign args */ - value = va_arg(*args, typeof(value)); - mystr = va_arg(*args, typeof(mystr)); - - /* Call printk */ - printk(KERN_INFO "Value %u, string %s\n", value, mystr); - - /* or count, check rights, serialize data in a buffer */ -} - -atomic_t eventb_count = ATOMIC_INIT(0); - -void probe_subsystem_eventb(void *probe_data, void *call_data, - const char *format, va_list *args) -{ - /* Increment counter */ - atomic_inc(&eventb_count); -} - -static struct probe_data probe_array[] = -{ - { .name = "subsystem_event", - .format = "integer %d string %s", - .probe_func = probe_subsystem_event }, - { .name = "subsystem_eventb", - .format = MARK_NOARGS, - .probe_func = probe_subsystem_eventb }, -}; - -static int __init probe_init(void) -{ - int result; - int i; - - for (i = 0; i < ARRAY_SIZE(probe_array); i++) { - result = marker_probe_register(probe_array[i].name, - probe_array[i].format, - probe_array[i].probe_func, &probe_array[i]); - if (result) - printk(KERN_INFO "Unable to register probe %s\n", - probe_array[i].name); - } - return 0; -} - -static void __exit probe_fini(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(probe_array); i++) - marker_probe_unregister(probe_array[i].name, - probe_array[i].probe_func, &probe_array[i]); - printk(KERN_INFO "Number of event b : %u\n", - atomic_read(&eventb_count)); - marker_synchronize_unregister(); -} - -module_init(probe_init); -module_exit(probe_fini); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Mathieu Desnoyers"); -MODULE_DESCRIPTION("SUBSYSTEM Probe"); diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index f4053dc7b5d..8f14c81abbc 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -13,7 +13,6 @@ # 2) modpost is then used to # 3) create one .mod.c file pr. module # 4) create one Module.symvers file with CRC for all exported symbols -# 4a) [CONFIG_MARKERS] create one Module.markers file listing defined markers # 5) compile all .mod.c files # 6) final link of the module to a file @@ -59,10 +58,6 @@ include scripts/Makefile.lib kernelsymfile := $(objtree)/Module.symvers modulesymfile := $(firstword $(KBUILD_EXTMOD))/Module.symvers -kernelmarkersfile := $(objtree)/Module.markers -modulemarkersfile := $(firstword $(KBUILD_EXTMOD))/Module.markers - -markersfile = $(if $(KBUILD_EXTMOD),$(modulemarkersfile),$(kernelmarkersfile)) # Step 1), find all modules listed in $(MODVERDIR)/ __modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod))) @@ -85,8 +80,6 @@ modpost = scripts/mod/modpost \ $(if $(KBUILD_EXTRA_SYMBOLS), $(patsubst %, -e %,$(KBUILD_EXTRA_SYMBOLS))) \ $(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \ $(if $(CONFIG_DEBUG_SECTION_MISMATCH),,-S) \ - $(if $(CONFIG_MARKERS),-K $(kernelmarkersfile)) \ - $(if $(CONFIG_MARKERS),-M $(markersfile)) \ $(if $(KBUILD_EXTMOD)$(KBUILD_MODPOST_WARN),-w) \ $(if $(cross_build),-c) @@ -101,17 +94,12 @@ quiet_cmd_kernel-mod = MODPOST $@ cmd_kernel-mod = $(modpost) $@ vmlinux.o: FORCE - @rm -fr $(kernelmarkersfile) $(call cmd,kernel-mod) # Declare generated files as targets for modpost $(symverfile): __modpost ; $(modules:.ko=.mod.c): __modpost ; -ifdef CONFIG_MARKERS -$(markersfile): __modpost ; -endif - # Step 5), compile all *.mod.c files -- cgit v1.2.3-70-g09d2 From 8f67eeb0b44cde19216955975ffef8513a87c0c0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 18 Sep 2009 22:45:48 +0200 Subject: i2c/chips: Remove deprecated pcf8575 driver The pcf8575 driver in drivers/i2c/chips which just exports its register to sysfs is superseded by drivers/gpio/pcf857x.c which properly uses the gpiolib. As this driver has been deprecated for more than a year, finally remove it. Signed-off-by: Wolfram Sang Cc: Bart Van Assche Signed-off-by: Jean Delvare --- Documentation/i2c/chips/pcf8575 | 69 -------------- drivers/i2c/chips/Kconfig | 18 ---- drivers/i2c/chips/Makefile | 1 - drivers/i2c/chips/pcf8575.c | 198 ---------------------------------------- 4 files changed, 286 deletions(-) delete mode 100644 Documentation/i2c/chips/pcf8575 delete mode 100644 drivers/i2c/chips/pcf8575.c (limited to 'Documentation') diff --git a/Documentation/i2c/chips/pcf8575 b/Documentation/i2c/chips/pcf8575 deleted file mode 100644 index 40b268eb276..00000000000 --- a/Documentation/i2c/chips/pcf8575 +++ /dev/null @@ -1,69 +0,0 @@ -About the PCF8575 chip and the pcf8575 kernel driver -==================================================== - -The PCF8575 chip is produced by the following manufacturers: - - * Philips NXP - http://www.nxp.com/#/pip/cb=[type=product,path=50807/41735/41850,final=PCF8575_3]|pip=[pip=PCF8575_3][0] - - * Texas Instruments - http://focus.ti.com/docs/prod/folders/print/pcf8575.html - - -Some vendors sell small PCB's with the PCF8575 mounted on it. You can connect -such a board to a Linux host via e.g. an USB to I2C interface. Examples of -PCB boards with a PCF8575: - - * SFE Breakout Board for PCF8575 I2C Expander by RobotShop - http://www.robotshop.ca/home/products/robot-parts/electronics/adapters-converters/sfe-pcf8575-i2c-expander-board.html - - * Breakout Board for PCF8575 I2C Expander by Spark Fun Electronics - http://www.sparkfun.com/commerce/product_info.php?products_id=8130 - - -Description ------------ -The PCF8575 chip is a 16-bit I/O expander for the I2C bus. Up to eight of -these chips can be connected to the same I2C bus. You can find this -chip on some custom designed hardware, but you won't find it on PC -motherboards. - -The PCF8575 chip consists of a 16-bit quasi-bidirectional port and an I2C-bus -interface. Each of the sixteen I/O's can be independently used as an input or -an output. To set up an I/O pin as an input, you have to write a 1 to the -corresponding output. - -For more information please see the datasheet. - - -Detection ---------- - -There is no method known to detect whether a chip on a given I2C address is -a PCF8575 or whether it is any other I2C device, so you have to pass the I2C -bus and address of the installed PCF8575 devices explicitly to the driver at -load time via the force=... parameter. - -/sys interface --------------- - -For each address on which a PCF8575 chip was found or forced the following -files will be created under /sys: -* /sys/bus/i2c/devices/-
/read -* /sys/bus/i2c/devices/-
/write -where bus is the I2C bus number (0, 1, ...) and address is the four-digit -hexadecimal representation of the 7-bit I2C address of the PCF8575 -(0020 .. 0027). - -The read file is read-only. Reading it will trigger an I2C read and will hence -report the current input state for the pins configured as inputs, and the -current output value for the pins configured as outputs. - -The write file is read-write. Writing a value to it will configure all pins -as output for which the corresponding bit is zero. Reading the write file will -return the value last written, or -EAGAIN if no value has yet been written to -the write file. - -On module initialization the configuration of the chip is not changed -- the -chip is left in the state it was already configured in through either power-up -or through previous I2C write actions. diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 02d746c9c47..1b5455ec290 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -33,24 +33,6 @@ config SENSORS_PCF8574 These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. -config PCF8575 - tristate "Philips PCF8575 (DEPRECATED)" - default n - depends on GPIO_PCF857X = "n" - help - If you say yes here you get support for Philips PCF8575 chip. - This chip is a 16-bit I/O expander for the I2C bus. Several other - chip manufacturers sell equivalent chips, e.g. Texas Instruments. - - This driver can also be built as a module. If so, the module - will be called pcf8575. - - This driver is deprecated and will be dropped soon. Use - drivers/gpio/pcf857x.c instead. - - This device is hard to detect and is rarely found on mainstream - hardware. If unsure, say N. - config SENSORS_PCA9539 tristate "Philips PCA9539 16-bit I/O port (DEPRECATED)" depends on EXPERIMENTAL && GPIO_PCA953X = "n" diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index f4680d16ee3..fceb377f528 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_DS1682) += ds1682.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o -obj-$(CONFIG_PCF8575) += pcf8575.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) diff --git a/drivers/i2c/chips/pcf8575.c b/drivers/i2c/chips/pcf8575.c deleted file mode 100644 index 07fd7cb3c57..00000000000 --- a/drivers/i2c/chips/pcf8575.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - pcf8575.c - - About the PCF8575 chip: the PCF8575 is a 16-bit I/O expander for the I2C bus - produced by a.o. Philips Semiconductors. - - Copyright (C) 2006 Michael Hennerich, Analog Devices Inc. - - Based on pcf8574.c. - - Copyright (c) 2007 Bart Van Assche . - Ported this driver from ucLinux to the mainstream Linux kernel. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include -#include -#include -#include /* kzalloc() */ -#include /* sysfs_create_group() */ - -/* Addresses to scan: none, device can't be detected */ -static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; - -/* Insmod parameters */ -I2C_CLIENT_INSMOD; - - -/* Each client has this additional data */ -struct pcf8575_data { - int write; /* last written value, or error code */ -}; - -/* following are the sysfs callback functions */ -static ssize_t show_read(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct i2c_client *client = to_i2c_client(dev); - u16 val; - u8 iopin_state[2]; - - i2c_master_recv(client, iopin_state, 2); - - val = iopin_state[0]; - val |= iopin_state[1] << 8; - - return sprintf(buf, "%u\n", val); -} - -static DEVICE_ATTR(read, S_IRUGO, show_read, NULL); - -static ssize_t show_write(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct pcf8575_data *data = dev_get_drvdata(dev); - if (data->write < 0) - return data->write; - return sprintf(buf, "%d\n", data->write); -} - -static ssize_t set_write(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct pcf8575_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - u8 iopin_state[2]; - - if (val > 0xffff) - return -EINVAL; - - data->write = val; - - iopin_state[0] = val & 0xFF; - iopin_state[1] = val >> 8; - - i2c_master_send(client, iopin_state, 2); - - return count; -} - -static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write); - -static struct attribute *pcf8575_attributes[] = { - &dev_attr_read.attr, - &dev_attr_write.attr, - NULL -}; - -static const struct attribute_group pcf8575_attr_group = { - .attrs = pcf8575_attributes, -}; - -/* - * Real code - */ - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int pcf8575_detect(struct i2c_client *client, int kind, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = client->adapter; - - if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) - return -ENODEV; - - /* This is the place to detect whether the chip at the specified - address really is a PCF8575 chip. However, there is no method known - to detect whether an I2C chip is a PCF8575 or any other I2C chip. */ - - strlcpy(info->type, "pcf8575", I2C_NAME_SIZE); - - return 0; -} - -static int pcf8575_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct pcf8575_data *data; - int err; - - data = kzalloc(sizeof(struct pcf8575_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto exit; - } - - i2c_set_clientdata(client, data); - data->write = -EAGAIN; - - /* Register sysfs hooks */ - err = sysfs_create_group(&client->dev.kobj, &pcf8575_attr_group); - if (err) - goto exit_free; - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static int pcf8575_remove(struct i2c_client *client) -{ - sysfs_remove_group(&client->dev.kobj, &pcf8575_attr_group); - kfree(i2c_get_clientdata(client)); - return 0; -} - -static const struct i2c_device_id pcf8575_id[] = { - { "pcf8575", 0 }, - { } -}; - -static struct i2c_driver pcf8575_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "pcf8575", - }, - .probe = pcf8575_probe, - .remove = pcf8575_remove, - .id_table = pcf8575_id, - - .detect = pcf8575_detect, - .address_data = &addr_data, -}; - -static int __init pcf8575_init(void) -{ - return i2c_add_driver(&pcf8575_driver); -} - -static void __exit pcf8575_exit(void) -{ - i2c_del_driver(&pcf8575_driver); -} - -MODULE_AUTHOR("Michael Hennerich , " - "Bart Van Assche "); -MODULE_DESCRIPTION("pcf8575 driver"); -MODULE_LICENSE("GPL"); - -module_init(pcf8575_init); -module_exit(pcf8575_exit); -- cgit v1.2.3-70-g09d2 From 732d481127abaa0add41ee918191ea08e9ede17e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 18 Sep 2009 22:45:48 +0200 Subject: i2c/chips: Remove deprecated pca9539 driver The pca9539 driver in drivers/i2c/chips which just exports its registers to sysfs is superseded by drivers/gpio/pca953x.c which properly uses the gpiolib. As this driver has been deprecated for more than a year, finally remove it. Signed-off-by: Wolfram Sang Acked-by: Ben Gardner Signed-off-by: Jean Delvare --- Documentation/i2c/chips/pca9539 | 58 --------------- drivers/i2c/chips/Kconfig | 13 ---- drivers/i2c/chips/Makefile | 1 - drivers/i2c/chips/pca9539.c | 152 ---------------------------------------- 4 files changed, 224 deletions(-) delete mode 100644 Documentation/i2c/chips/pca9539 delete mode 100644 drivers/i2c/chips/pca9539.c (limited to 'Documentation') diff --git a/Documentation/i2c/chips/pca9539 b/Documentation/i2c/chips/pca9539 deleted file mode 100644 index 6aff890088b..00000000000 --- a/Documentation/i2c/chips/pca9539 +++ /dev/null @@ -1,58 +0,0 @@ -Kernel driver pca9539 -===================== - -NOTE: this driver is deprecated and will be dropped soon, use -drivers/gpio/pca9539.c instead. - -Supported chips: - * Philips PCA9539 - Prefix: 'pca9539' - Addresses scanned: none - Datasheet: - http://www.semiconductors.philips.com/acrobat/datasheets/PCA9539_2.pdf - -Author: Ben Gardner - - -Description ------------ - -The Philips PCA9539 is a 16 bit low power I/O device. -All 16 lines can be individually configured as an input or output. -The input sense can also be inverted. -The 16 lines are split between two bytes. - - -Detection ---------- - -The PCA9539 is difficult to detect and not commonly found in PC machines, -so you have to pass the I2C bus and address of the installed PCA9539 -devices explicitly to the driver at load time via the force=... parameter. - - -Sysfs entries -------------- - -Each is a byte that maps to the 8 I/O bits. -A '0' suffix is for bits 0-7, while '1' is for bits 8-15. - -input[01] - read the current value -output[01] - sets the output value -direction[01] - direction of each bit: 1=input, 0=output -invert[01] - toggle the input bit sense - -input reads the actual state of the line and is always available. -The direction defaults to input for all channels. - - -General Remarks ---------------- - -Note that each output, direction, and invert entry controls 8 lines. -You should use the read, modify, write sequence. -For example. to set output bit 0 of 1. - val=$(cat output0) - val=$(( $val | 1 )) - echo $val > output0 - diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 1b5455ec290..8cd1a7f3dcb 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -33,19 +33,6 @@ config SENSORS_PCF8574 These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. -config SENSORS_PCA9539 - tristate "Philips PCA9539 16-bit I/O port (DEPRECATED)" - depends on EXPERIMENTAL && GPIO_PCA953X = "n" - help - If you say yes here you get support for the Philips PCA9539 - 16-bit I/O port. - - This driver can also be built as a module. If so, the module - will be called pca9539. - - This driver is deprecated and will be dropped soon. Use - drivers/gpio/pca953x.c instead. - config SENSORS_TSL2550 tristate "Taos TSL2550 ambient light sensor" depends on EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index fceb377f528..8cd778dd64e 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -11,7 +11,6 @@ # obj-$(CONFIG_DS1682) += ds1682.o -obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c deleted file mode 100644 index 270de4e56a8..00000000000 --- a/drivers/i2c/chips/pca9539.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - pca9539.c - 16-bit I/O port with interrupt and reset - - Copyright (C) 2005 Ben Gardner - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; version 2 of the License. -*/ - -#include -#include -#include -#include -#include - -/* Addresses to scan: none, device is not autodetected */ -static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; - -/* Insmod parameters */ -I2C_CLIENT_INSMOD_1(pca9539); - -enum pca9539_cmd -{ - PCA9539_INPUT_0 = 0, - PCA9539_INPUT_1 = 1, - PCA9539_OUTPUT_0 = 2, - PCA9539_OUTPUT_1 = 3, - PCA9539_INVERT_0 = 4, - PCA9539_INVERT_1 = 5, - PCA9539_DIRECTION_0 = 6, - PCA9539_DIRECTION_1 = 7, -}; - -/* following are the sysfs callback functions */ -static ssize_t pca9539_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *psa = to_sensor_dev_attr(attr); - struct i2c_client *client = to_i2c_client(dev); - return sprintf(buf, "%d\n", i2c_smbus_read_byte_data(client, - psa->index)); -} - -static ssize_t pca9539_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *psa = to_sensor_dev_attr(attr); - struct i2c_client *client = to_i2c_client(dev); - unsigned long val = simple_strtoul(buf, NULL, 0); - if (val > 0xff) - return -EINVAL; - i2c_smbus_write_byte_data(client, psa->index, val); - return count; -} - -/* Define the device attributes */ - -#define PCA9539_ENTRY_RO(name, cmd_idx) \ - static SENSOR_DEVICE_ATTR(name, S_IRUGO, pca9539_show, NULL, cmd_idx) - -#define PCA9539_ENTRY_RW(name, cmd_idx) \ - static SENSOR_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, pca9539_show, \ - pca9539_store, cmd_idx) - -PCA9539_ENTRY_RO(input0, PCA9539_INPUT_0); -PCA9539_ENTRY_RO(input1, PCA9539_INPUT_1); -PCA9539_ENTRY_RW(output0, PCA9539_OUTPUT_0); -PCA9539_ENTRY_RW(output1, PCA9539_OUTPUT_1); -PCA9539_ENTRY_RW(invert0, PCA9539_INVERT_0); -PCA9539_ENTRY_RW(invert1, PCA9539_INVERT_1); -PCA9539_ENTRY_RW(direction0, PCA9539_DIRECTION_0); -PCA9539_ENTRY_RW(direction1, PCA9539_DIRECTION_1); - -static struct attribute *pca9539_attributes[] = { - &sensor_dev_attr_input0.dev_attr.attr, - &sensor_dev_attr_input1.dev_attr.attr, - &sensor_dev_attr_output0.dev_attr.attr, - &sensor_dev_attr_output1.dev_attr.attr, - &sensor_dev_attr_invert0.dev_attr.attr, - &sensor_dev_attr_invert1.dev_attr.attr, - &sensor_dev_attr_direction0.dev_attr.attr, - &sensor_dev_attr_direction1.dev_attr.attr, - NULL -}; - -static struct attribute_group pca9539_defattr_group = { - .attrs = pca9539_attributes, -}; - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int pca9539_detect(struct i2c_client *client, int kind, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = client->adapter; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - strlcpy(info->type, "pca9539", I2C_NAME_SIZE); - - return 0; -} - -static int pca9539_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - /* Register sysfs hooks */ - return sysfs_create_group(&client->dev.kobj, - &pca9539_defattr_group); -} - -static int pca9539_remove(struct i2c_client *client) -{ - sysfs_remove_group(&client->dev.kobj, &pca9539_defattr_group); - return 0; -} - -static const struct i2c_device_id pca9539_id[] = { - { "pca9539", 0 }, - { } -}; - -static struct i2c_driver pca9539_driver = { - .driver = { - .name = "pca9539", - }, - .probe = pca9539_probe, - .remove = pca9539_remove, - .id_table = pca9539_id, - - .detect = pca9539_detect, - .address_data = &addr_data, -}; - -static int __init pca9539_init(void) -{ - return i2c_add_driver(&pca9539_driver); -} - -static void __exit pca9539_exit(void) -{ - i2c_del_driver(&pca9539_driver); -} - -MODULE_AUTHOR("Ben Gardner "); -MODULE_DESCRIPTION("PCA9539 driver"); -MODULE_LICENSE("GPL"); - -module_init(pca9539_init); -module_exit(pca9539_exit); - -- cgit v1.2.3-70-g09d2 From e7c5c49ecdac6dc5a6b67a27838b1b562eeec1b9 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 18 Sep 2009 22:45:49 +0200 Subject: i2c/chips: Remove deprecated pcf8574 driver The pcf8574 driver in drivers/i2c/chips which just exports its register to sysfs is superseded by drivers/gpio/pcf857x.c which properly uses the gpiolib. As this driver has been deprecated for more than a year, finally remove it. Signed-off-by: Wolfram Sang Cc: Aurelien Jarno Signed-off-by: Jean Delvare --- Documentation/i2c/chips/pcf8574 | 65 ------------ drivers/i2c/chips/Kconfig | 17 ---- drivers/i2c/chips/Makefile | 1 - drivers/i2c/chips/pcf8574.c | 215 ---------------------------------------- 4 files changed, 298 deletions(-) delete mode 100644 Documentation/i2c/chips/pcf8574 delete mode 100644 drivers/i2c/chips/pcf8574.c (limited to 'Documentation') diff --git a/Documentation/i2c/chips/pcf8574 b/Documentation/i2c/chips/pcf8574 deleted file mode 100644 index 235815c075f..00000000000 --- a/Documentation/i2c/chips/pcf8574 +++ /dev/null @@ -1,65 +0,0 @@ -Kernel driver pcf8574 -===================== - -Supported chips: - * Philips PCF8574 - Prefix: 'pcf8574' - Addresses scanned: none - Datasheet: Publicly available at the Philips Semiconductors website - http://www.semiconductors.philips.com/pip/PCF8574P.html - - * Philips PCF8574A - Prefix: 'pcf8574a' - Addresses scanned: none - Datasheet: Publicly available at the Philips Semiconductors website - http://www.semiconductors.philips.com/pip/PCF8574P.html - -Authors: - Frodo Looijaard , - Philip Edelbrock , - Dan Eaton , - Aurelien Jarno , - Jean Delvare , - - -Description ------------ -The PCF8574(A) is an 8-bit I/O expander for the I2C bus produced by Philips -Semiconductors. It is designed to provide a byte I2C interface to up to 16 -separate devices (8 x PCF8574 and 8 x PCF8574A). - -This device consists of a quasi-bidirectional port. Each of the eight I/Os -can be independently used as an input or output. To setup an I/O as an -input, you have to write a 1 to the corresponding output. - -For more informations see the datasheet. - - -Accessing PCF8574(A) via /sys interface -------------------------------------- - -The PCF8574(A) is plainly impossible to detect ! Stupid chip. -So, you have to pass the I2C bus and address of the installed PCF857A -and PCF8574A devices explicitly to the driver at load time via the -force=... parameter. - -On detection (i.e. insmod, modprobe et al.), directories are being -created for each detected PCF8574(A): - -/sys/bus/i2c/devices/<0>-<1>/ -where <0> is the bus the chip was detected on (e. g. i2c-0) -and <1> the chip address ([20..27] or [38..3f]): - -(example: /sys/bus/i2c/devices/1-0020/) - -Inside these directories, there are two files each: -read and write (and one file with chip name). - -The read file is read-only. Reading gives you the current I/O input -if the corresponding output is set as 1, otherwise the current output -value, that is to say 0. - -The write file is read/write. Writing a value outputs it on the I/O -port. Reading returns the last written value. As it is not possible -to read this value from the chip, you need to write at least once to -this file before you can read back from it. diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 8cd1a7f3dcb..f9618f4d4e4 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -16,23 +16,6 @@ config DS1682 This driver can also be built as a module. If so, the module will be called ds1682. -config SENSORS_PCF8574 - tristate "Philips PCF8574 and PCF8574A (DEPRECATED)" - depends on EXPERIMENTAL && GPIO_PCF857X = "n" - default n - help - If you say yes here you get support for Philips PCF8574 and - PCF8574A chips. These chips are 8-bit I/O expanders for the I2C bus. - - This driver can also be built as a module. If so, the module - will be called pcf8574. - - This driver is deprecated and will be dropped soon. Use - drivers/gpio/pcf857x.c instead. - - These devices are hard to detect and rarely found on mainstream - hardware. If unsure, say N. - config SENSORS_TSL2550 tristate "Taos TSL2550 ambient light sensor" depends on EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 8cd778dd64e..749cf360629 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -11,7 +11,6 @@ # obj-$(CONFIG_DS1682) += ds1682.o -obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c deleted file mode 100644 index 6ec309894c8..00000000000 --- a/drivers/i2c/chips/pcf8574.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - Copyright (c) 2000 Frodo Looijaard , - Philip Edelbrock , - Dan Eaton - Ported to Linux 2.6 by Aurelien Jarno with - the help of Jean Delvare - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* A few notes about the PCF8574: - -* The PCF8574 is an 8-bit I/O expander for the I2C bus produced by - Philips Semiconductors. It is designed to provide a byte I2C - interface to up to 8 separate devices. - -* The PCF8574 appears as a very simple SMBus device which can be - read from or written to with SMBUS byte read/write accesses. - - --Dan - -*/ - -#include -#include -#include -#include - -/* Addresses to scan: none, device can't be detected */ -static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; - -/* Insmod parameters */ -I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a); - -/* Each client has this additional data */ -struct pcf8574_data { - int write; /* Remember last written value */ -}; - -static void pcf8574_init_client(struct i2c_client *client); - -/* following are the sysfs callback functions */ -static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct i2c_client *client = to_i2c_client(dev); - return sprintf(buf, "%u\n", i2c_smbus_read_byte(client)); -} - -static DEVICE_ATTR(read, S_IRUGO, show_read, NULL); - -static ssize_t show_write(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pcf8574_data *data = i2c_get_clientdata(to_i2c_client(dev)); - - if (data->write < 0) - return data->write; - - return sprintf(buf, "%d\n", data->write); -} - -static ssize_t set_write(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct pcf8574_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - if (val > 0xff) - return -EINVAL; - - data->write = val; - i2c_smbus_write_byte(client, data->write); - return count; -} - -static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write); - -static struct attribute *pcf8574_attributes[] = { - &dev_attr_read.attr, - &dev_attr_write.attr, - NULL -}; - -static const struct attribute_group pcf8574_attr_group = { - .attrs = pcf8574_attributes, -}; - -/* - * Real code - */ - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int pcf8574_detect(struct i2c_client *client, int kind, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = client->adapter; - const char *client_name; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) - return -ENODEV; - - /* Now, we would do the remaining detection. But the PCF8574 is plainly - impossible to detect! Stupid chip. */ - - /* Determine the chip type */ - if (kind <= 0) { - if (client->addr >= 0x38 && client->addr <= 0x3f) - kind = pcf8574a; - else - kind = pcf8574; - } - - if (kind == pcf8574a) - client_name = "pcf8574a"; - else - client_name = "pcf8574"; - strlcpy(info->type, client_name, I2C_NAME_SIZE); - - return 0; -} - -static int pcf8574_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct pcf8574_data *data; - int err; - - data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto exit; - } - - i2c_set_clientdata(client, data); - - /* Initialize the PCF8574 chip */ - pcf8574_init_client(client); - - /* Register sysfs hooks */ - err = sysfs_create_group(&client->dev.kobj, &pcf8574_attr_group); - if (err) - goto exit_free; - return 0; - - exit_free: - kfree(data); - exit: - return err; -} - -static int pcf8574_remove(struct i2c_client *client) -{ - sysfs_remove_group(&client->dev.kobj, &pcf8574_attr_group); - kfree(i2c_get_clientdata(client)); - return 0; -} - -/* Called when we have found a new PCF8574. */ -static void pcf8574_init_client(struct i2c_client *client) -{ - struct pcf8574_data *data = i2c_get_clientdata(client); - data->write = -EAGAIN; -} - -static const struct i2c_device_id pcf8574_id[] = { - { "pcf8574", 0 }, - { "pcf8574a", 0 }, - { } -}; - -static struct i2c_driver pcf8574_driver = { - .driver = { - .name = "pcf8574", - }, - .probe = pcf8574_probe, - .remove = pcf8574_remove, - .id_table = pcf8574_id, - - .detect = pcf8574_detect, - .address_data = &addr_data, -}; - -static int __init pcf8574_init(void) -{ - return i2c_add_driver(&pcf8574_driver); -} - -static void __exit pcf8574_exit(void) -{ - i2c_del_driver(&pcf8574_driver); -} - - -MODULE_AUTHOR - ("Frodo Looijaard , " - "Philip Edelbrock , " - "Dan Eaton " - "and Aurelien Jarno "); -MODULE_DESCRIPTION("PCF8574 driver"); -MODULE_LICENSE("GPL"); - -module_init(pcf8574_init); -module_exit(pcf8574_exit); -- cgit v1.2.3-70-g09d2 From 76b3e28fa728bb68895cbd8375f5ce233bd891de Mon Sep 17 00:00:00 2001 From: Crane Cai Date: Fri, 18 Sep 2009 22:45:50 +0200 Subject: i2c-piix4: Add AMD SB900 SMBus device ID Add new SMBus device ID for AMD SB900. Signed-off-by: Crane Cai Signed-off-by: Jean Delvare --- Documentation/i2c/busses/i2c-piix4 | 2 ++ drivers/i2c/busses/Kconfig | 3 ++- drivers/i2c/busses/i2c-piix4.c | 9 ++++++--- include/linux/pci_ids.h | 1 + 4 files changed, 11 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index f889481762b..c5b37c57055 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -8,6 +8,8 @@ Supported adapters: Datasheet: Only available via NDA from ServerWorks * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges Datasheet: Not publicly available + * AMD SB900 + Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge Datasheet: Publicly available at the SMSC website http://www.smsc.com diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 8206442fbab..bb216c5fe30 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -113,7 +113,7 @@ config I2C_ISCH will be called i2c-isch. config I2C_PIIX4 - tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)" + tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)" depends on PCI help If you say yes to this option, support will be included for the Intel @@ -128,6 +128,7 @@ config I2C_PIIX4 ATI SB600 ATI SB700 ATI SB800 + AMD SB900 Serverworks OSB4 Serverworks CSB5 Serverworks CSB6 diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 0249a7d762b..a782c7a08f9 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -22,6 +22,7 @@ Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700, SB800 + AMD SB900 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface. @@ -479,6 +480,7 @@ static struct pci_device_id piix4_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, @@ -499,9 +501,10 @@ static int __devinit piix4_probe(struct pci_dev *dev, { int retval; - if ((dev->vendor == PCI_VENDOR_ID_ATI) && - (dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) && - (dev->revision >= 0x40)) + if ((dev->vendor == PCI_VENDOR_ID_ATI && + dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && + dev->revision >= 0x40) || + dev->vendor == PCI_VENDOR_ID_AMD) /* base address location etc changed in SB800 */ retval = piix4_setup_sb800(dev, id); else diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3b6b788fe2b..7803565aa87 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -543,6 +543,7 @@ #define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450 #define PCI_DEVICE_ID_AMD_8131_APIC 0x7451 #define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458 +#define PCI_DEVICE_ID_AMD_SB900_SMBUS 0x780b #define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F #define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090 #define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091 -- cgit v1.2.3-70-g09d2 From 9254078c6b453ce02dab150189ed85744f254ddb Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Sat, 12 Sep 2009 09:43:25 -0300 Subject: V4L/DVB (12752): get_dvb_firmware: add af9015 firmware Add af9015 firmware to get_dvb_firmware script. Firmware version is 4.95.0.0. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- Documentation/dvb/get_dvb_firmware | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 3d1b0ab70c8..14b7b5a3bcb 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -25,7 +25,8 @@ use IO::Handle; "tda10046lifeview", "av7110", "dec2000t", "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", "or51211", "or51132_qam", "or51132_vsb", "bluebird", - "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" ); + "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718", + "af9015"); # Check args syntax() if (scalar(@ARGV) != 1); @@ -514,6 +515,40 @@ sub bluebird { $outfile; } +sub af9015 { + my $sourcefile = "download.ashx?file=57"; + my $url = "http://www.ite.com.tw/EN/Services/$sourcefile"; + my $hash = "ff5b096ed47c080870eacdab2de33ad6"; + my $outfile = "dvb-usb-af9015.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + my $fwoffset = 0x22708; + my $fwlength = 18225; + my ($chunklength, $buf, $rcount); + + checkstandard(); + + wgetfile($sourcefile, $url); + unzip($sourcefile, $tmpdir); + verify("$tmpdir/Driver/Files/AF15BDA.sys", $hash); + + open INFILE, '<', "$tmpdir/Driver/Files/AF15BDA.sys"; + open OUTFILE, '>', $outfile; + + sysseek(INFILE, $fwoffset, SEEK_SET); + while($fwlength > 0) { + $chunklength = 55; + $chunklength = $fwlength if ($chunklength > $fwlength); + $rcount = sysread(INFILE, $buf, $chunklength); + die "Ran out of data\n" if ($rcount != $chunklength); + syswrite(OUTFILE, $buf); + sysread(INFILE, $buf, 8); + $fwlength -= $rcount + 8; + } + + close OUTFILE; + close INFILE; +} + # --------------------------------------------------------------- # Utilities -- cgit v1.2.3-70-g09d2 From 8e080c2e6cadada82a6b520e0c23a1cb974822d5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 13 Sep 2009 22:16:04 -0300 Subject: V4L/DVB (12761): DocBook: add media API specs The V4L and DVB API's are there for a long time. however, up to now, no efforts were done to merge them to kernel DocBook. This patch adds the current versions of the specs as an unique compendium. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/Makefile | 2 +- Documentation/DocBook/dvb/audio.xml | 1473 ++++++++++++ Documentation/DocBook/dvb/ca.xml | 221 ++ Documentation/DocBook/dvb/demux.xml | 973 ++++++++ Documentation/DocBook/dvb/dvbapi.xml | 79 + Documentation/DocBook/dvb/dvbstb.pdf | Bin 0 -> 1881 bytes Documentation/DocBook/dvb/dvbstb.png | Bin 0 -> 22655 bytes Documentation/DocBook/dvb/examples.xml | 365 +++ Documentation/DocBook/dvb/frontend.xml | 1765 ++++++++++++++ Documentation/DocBook/dvb/intro.xml | 191 ++ Documentation/DocBook/dvb/kdapi.xml | 2309 ++++++++++++++++++ Documentation/DocBook/dvb/net.xml | 12 + Documentation/DocBook/dvb/video.xml | 1971 ++++++++++++++++ Documentation/DocBook/media-entities.xml | 363 +++ Documentation/DocBook/media-indices.xml | 85 + Documentation/DocBook/media.xml | 112 + Documentation/DocBook/v4l/biblio.xml | 188 ++ Documentation/DocBook/v4l/capture.c.xml | 659 ++++++ Documentation/DocBook/v4l/common.xml | 1169 ++++++++++ Documentation/DocBook/v4l/compat.xml | 2457 ++++++++++++++++++++ Documentation/DocBook/v4l/controls.xml | 2049 ++++++++++++++++ Documentation/DocBook/v4l/crop.gif | Bin 0 -> 5967 bytes Documentation/DocBook/v4l/crop.pdf | Bin 0 -> 5846 bytes Documentation/DocBook/v4l/dev-capture.xml | 115 + Documentation/DocBook/v4l/dev-codec.xml | 26 + Documentation/DocBook/v4l/dev-effect.xml | 25 + Documentation/DocBook/v4l/dev-osd.xml | 164 ++ Documentation/DocBook/v4l/dev-output.xml | 111 + Documentation/DocBook/v4l/dev-overlay.xml | 379 +++ Documentation/DocBook/v4l/dev-radio.xml | 57 + Documentation/DocBook/v4l/dev-raw-vbi.xml | 347 +++ Documentation/DocBook/v4l/dev-rds.xml | 168 ++ Documentation/DocBook/v4l/dev-sliced-vbi.xml | 708 ++++++ Documentation/DocBook/v4l/dev-teletext.xml | 40 + Documentation/DocBook/v4l/driver.xml | 208 ++ Documentation/DocBook/v4l/fdl-appendix.xml | 671 ++++++ Documentation/DocBook/v4l/fieldseq_bt.gif | Bin 0 -> 25430 bytes Documentation/DocBook/v4l/fieldseq_bt.pdf | Bin 0 -> 9185 bytes Documentation/DocBook/v4l/fieldseq_tb.gif | Bin 0 -> 25323 bytes Documentation/DocBook/v4l/fieldseq_tb.pdf | Bin 0 -> 9173 bytes Documentation/DocBook/v4l/func-close.xml | 70 + Documentation/DocBook/v4l/func-ioctl.xml | 146 ++ Documentation/DocBook/v4l/func-mmap.xml | 185 ++ Documentation/DocBook/v4l/func-munmap.xml | 83 + Documentation/DocBook/v4l/func-open.xml | 121 + Documentation/DocBook/v4l/func-poll.xml | 127 + Documentation/DocBook/v4l/func-read.xml | 189 ++ Documentation/DocBook/v4l/func-select.xml | 138 ++ Documentation/DocBook/v4l/func-write.xml | 136 ++ Documentation/DocBook/v4l/io.xml | 1073 +++++++++ Documentation/DocBook/v4l/keytable.c.xml | 172 ++ Documentation/DocBook/v4l/libv4l.xml | 167 ++ Documentation/DocBook/v4l/pixfmt-grey.xml | 70 + Documentation/DocBook/v4l/pixfmt-nv12.xml | 151 ++ Documentation/DocBook/v4l/pixfmt-nv16.xml | 174 ++ Documentation/DocBook/v4l/pixfmt-packed-rgb.xml | 862 +++++++ Documentation/DocBook/v4l/pixfmt-packed-yuv.xml | 244 ++ Documentation/DocBook/v4l/pixfmt-sbggr16.xml | 91 + Documentation/DocBook/v4l/pixfmt-sbggr8.xml | 75 + Documentation/DocBook/v4l/pixfmt-sgbrg8.xml | 75 + Documentation/DocBook/v4l/pixfmt-sgrbg8.xml | 75 + Documentation/DocBook/v4l/pixfmt-uyvy.xml | 128 + Documentation/DocBook/v4l/pixfmt-vyuy.xml | 128 + Documentation/DocBook/v4l/pixfmt-y16.xml | 89 + Documentation/DocBook/v4l/pixfmt-y41p.xml | 157 ++ Documentation/DocBook/v4l/pixfmt-yuv410.xml | 141 ++ Documentation/DocBook/v4l/pixfmt-yuv411p.xml | 155 ++ Documentation/DocBook/v4l/pixfmt-yuv420.xml | 157 ++ Documentation/DocBook/v4l/pixfmt-yuv422p.xml | 161 ++ Documentation/DocBook/v4l/pixfmt-yuyv.xml | 128 + Documentation/DocBook/v4l/pixfmt-yvyu.xml | 128 + Documentation/DocBook/v4l/pixfmt.xml | 796 +++++++ Documentation/DocBook/v4l/remote_controllers.xml | 170 ++ Documentation/DocBook/v4l/v4l2.xml | 481 ++++ Documentation/DocBook/v4l/v4l2grab.c.xml | 164 ++ Documentation/DocBook/v4l/vbi_525.gif | Bin 0 -> 4741 bytes Documentation/DocBook/v4l/vbi_525.pdf | Bin 0 -> 3395 bytes Documentation/DocBook/v4l/vbi_625.gif | Bin 0 -> 5095 bytes Documentation/DocBook/v4l/vbi_625.pdf | Bin 0 -> 3683 bytes Documentation/DocBook/v4l/vbi_hsync.gif | Bin 0 -> 2400 bytes Documentation/DocBook/v4l/vbi_hsync.pdf | Bin 0 -> 7405 bytes Documentation/DocBook/v4l/videodev2.h.xml | 1639 +++++++++++++ Documentation/DocBook/v4l/vidioc-cropcap.xml | 174 ++ .../DocBook/v4l/vidioc-dbg-g-chip-ident.xml | 275 +++ .../DocBook/v4l/vidioc-dbg-g-register.xml | 275 +++ Documentation/DocBook/v4l/vidioc-encoder-cmd.xml | 204 ++ Documentation/DocBook/v4l/vidioc-enum-fmt.xml | 164 ++ .../DocBook/v4l/vidioc-enum-frameintervals.xml | 270 +++ .../DocBook/v4l/vidioc-enum-framesizes.xml | 282 +++ Documentation/DocBook/v4l/vidioc-enumaudio.xml | 86 + Documentation/DocBook/v4l/vidioc-enumaudioout.xml | 89 + Documentation/DocBook/v4l/vidioc-enuminput.xml | 287 +++ Documentation/DocBook/v4l/vidioc-enumoutput.xml | 172 ++ Documentation/DocBook/v4l/vidioc-enumstd.xml | 391 ++++ Documentation/DocBook/v4l/vidioc-g-audio.xml | 188 ++ Documentation/DocBook/v4l/vidioc-g-audioout.xml | 154 ++ Documentation/DocBook/v4l/vidioc-g-crop.xml | 143 ++ Documentation/DocBook/v4l/vidioc-g-ctrl.xml | 130 ++ Documentation/DocBook/v4l/vidioc-g-enc-index.xml | 213 ++ Documentation/DocBook/v4l/vidioc-g-ext-ctrls.xml | 307 +++ Documentation/DocBook/v4l/vidioc-g-fbuf.xml | 456 ++++ Documentation/DocBook/v4l/vidioc-g-fmt.xml | 201 ++ Documentation/DocBook/v4l/vidioc-g-frequency.xml | 145 ++ Documentation/DocBook/v4l/vidioc-g-input.xml | 100 + Documentation/DocBook/v4l/vidioc-g-jpegcomp.xml | 180 ++ Documentation/DocBook/v4l/vidioc-g-modulator.xml | 246 ++ Documentation/DocBook/v4l/vidioc-g-output.xml | 100 + Documentation/DocBook/v4l/vidioc-g-parm.xml | 332 +++ Documentation/DocBook/v4l/vidioc-g-priority.xml | 144 ++ .../DocBook/v4l/vidioc-g-sliced-vbi-cap.xml | 264 +++ Documentation/DocBook/v4l/vidioc-g-std.xml | 99 + Documentation/DocBook/v4l/vidioc-g-tuner.xml | 535 +++++ Documentation/DocBook/v4l/vidioc-log-status.xml | 58 + Documentation/DocBook/v4l/vidioc-overlay.xml | 83 + Documentation/DocBook/v4l/vidioc-qbuf.xml | 168 ++ Documentation/DocBook/v4l/vidioc-querybuf.xml | 103 + Documentation/DocBook/v4l/vidioc-querycap.xml | 284 +++ Documentation/DocBook/v4l/vidioc-queryctrl.xml | 428 ++++ Documentation/DocBook/v4l/vidioc-querystd.xml | 83 + Documentation/DocBook/v4l/vidioc-reqbufs.xml | 160 ++ .../DocBook/v4l/vidioc-s-hw-freq-seek.xml | 129 + Documentation/DocBook/v4l/vidioc-streamon.xml | 106 + 122 files changed, 36715 insertions(+), 1 deletion(-) create mode 100644 Documentation/DocBook/dvb/audio.xml create mode 100644 Documentation/DocBook/dvb/ca.xml create mode 100644 Documentation/DocBook/dvb/demux.xml create mode 100644 Documentation/DocBook/dvb/dvbapi.xml create mode 100644 Documentation/DocBook/dvb/dvbstb.pdf create mode 100644 Documentation/DocBook/dvb/dvbstb.png create mode 100644 Documentation/DocBook/dvb/examples.xml create mode 100644 Documentation/DocBook/dvb/frontend.xml create mode 100644 Documentation/DocBook/dvb/intro.xml create mode 100644 Documentation/DocBook/dvb/kdapi.xml create mode 100644 Documentation/DocBook/dvb/net.xml create mode 100644 Documentation/DocBook/dvb/video.xml create mode 100644 Documentation/DocBook/media-entities.xml create mode 100644 Documentation/DocBook/media-indices.xml create mode 100644 Documentation/DocBook/media.xml create mode 100644 Documentation/DocBook/v4l/biblio.xml create mode 100644 Documentation/DocBook/v4l/capture.c.xml create mode 100644 Documentation/DocBook/v4l/common.xml create mode 100644 Documentation/DocBook/v4l/compat.xml create mode 100644 Documentation/DocBook/v4l/controls.xml create mode 100644 Documentation/DocBook/v4l/crop.gif create mode 100644 Documentation/DocBook/v4l/crop.pdf create mode 100644 Documentation/DocBook/v4l/dev-capture.xml create mode 100644 Documentation/DocBook/v4l/dev-codec.xml create mode 100644 Documentation/DocBook/v4l/dev-effect.xml create mode 100644 Documentation/DocBook/v4l/dev-osd.xml create mode 100644 Documentation/DocBook/v4l/dev-output.xml create mode 100644 Documentation/DocBook/v4l/dev-overlay.xml create mode 100644 Documentation/DocBook/v4l/dev-radio.xml create mode 100644 Documentation/DocBook/v4l/dev-raw-vbi.xml create mode 100644 Documentation/DocBook/v4l/dev-rds.xml create mode 100644 Documentation/DocBook/v4l/dev-sliced-vbi.xml create mode 100644 Documentation/DocBook/v4l/dev-teletext.xml create mode 100644 Documentation/DocBook/v4l/driver.xml create mode 100644 Documentation/DocBook/v4l/fdl-appendix.xml create mode 100644 Documentation/DocBook/v4l/fieldseq_bt.gif create mode 100644 Documentation/DocBook/v4l/fieldseq_bt.pdf create mode 100644 Documentation/DocBook/v4l/fieldseq_tb.gif create mode 100644 Documentation/DocBook/v4l/fieldseq_tb.pdf create mode 100644 Documentation/DocBook/v4l/func-close.xml create mode 100644 Documentation/DocBook/v4l/func-ioctl.xml create mode 100644 Documentation/DocBook/v4l/func-mmap.xml create mode 100644 Documentation/DocBook/v4l/func-munmap.xml create mode 100644 Documentation/DocBook/v4l/func-open.xml create mode 100644 Documentation/DocBook/v4l/func-poll.xml create mode 100644 Documentation/DocBook/v4l/func-read.xml create mode 100644 Documentation/DocBook/v4l/func-select.xml create mode 100644 Documentation/DocBook/v4l/func-write.xml create mode 100644 Documentation/DocBook/v4l/io.xml create mode 100644 Documentation/DocBook/v4l/keytable.c.xml create mode 100644 Documentation/DocBook/v4l/libv4l.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-grey.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-nv12.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-nv16.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-packed-rgb.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-packed-yuv.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-sbggr16.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-sbggr8.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-sgbrg8.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-sgrbg8.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-uyvy.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-vyuy.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-y16.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-y41p.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-yuv410.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-yuv411p.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-yuv420.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-yuv422p.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-yuyv.xml create mode 100644 Documentation/DocBook/v4l/pixfmt-yvyu.xml create mode 100644 Documentation/DocBook/v4l/pixfmt.xml create mode 100644 Documentation/DocBook/v4l/remote_controllers.xml create mode 100644 Documentation/DocBook/v4l/v4l2.xml create mode 100644 Documentation/DocBook/v4l/v4l2grab.c.xml create mode 100644 Documentation/DocBook/v4l/vbi_525.gif create mode 100644 Documentation/DocBook/v4l/vbi_525.pdf create mode 100644 Documentation/DocBook/v4l/vbi_625.gif create mode 100644 Documentation/DocBook/v4l/vbi_625.pdf create mode 100644 Documentation/DocBook/v4l/vbi_hsync.gif create mode 100644 Documentation/DocBook/v4l/vbi_hsync.pdf create mode 100644 Documentation/DocBook/v4l/videodev2.h.xml create mode 100644 Documentation/DocBook/v4l/vidioc-cropcap.xml create mode 100644 Documentation/DocBook/v4l/vidioc-dbg-g-chip-ident.xml create mode 100644 Documentation/DocBook/v4l/vidioc-dbg-g-register.xml create mode 100644 Documentation/DocBook/v4l/vidioc-encoder-cmd.xml create mode 100644 Documentation/DocBook/v4l/vidioc-enum-fmt.xml create mode 100644 Documentation/DocBook/v4l/vidioc-enum-frameintervals.xml create mode 100644 Documentation/DocBook/v4l/vidioc-enum-framesizes.xml create mode 100644 Documentation/DocBook/v4l/vidioc-enumaudio.xml create mode 100644 Documentation/DocBook/v4l/vidioc-enumaudioout.xml create mode 100644 Documentation/DocBook/v4l/vidioc-enuminput.xml create mode 100644 Documentation/DocBook/v4l/vidioc-enumoutput.xml create mode 100644 Documentation/DocBook/v4l/vidioc-enumstd.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-audio.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-audioout.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-crop.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-ctrl.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-enc-index.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-ext-ctrls.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-fbuf.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-fmt.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-frequency.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-input.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-jpegcomp.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-modulator.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-output.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-parm.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-priority.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-sliced-vbi-cap.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-std.xml create mode 100644 Documentation/DocBook/v4l/vidioc-g-tuner.xml create mode 100644 Documentation/DocBook/v4l/vidioc-log-status.xml create mode 100644 Documentation/DocBook/v4l/vidioc-overlay.xml create mode 100644 Documentation/DocBook/v4l/vidioc-qbuf.xml create mode 100644 Documentation/DocBook/v4l/vidioc-querybuf.xml create mode 100644 Documentation/DocBook/v4l/vidioc-querycap.xml create mode 100644 Documentation/DocBook/v4l/vidioc-queryctrl.xml create mode 100644 Documentation/DocBook/v4l/vidioc-querystd.xml create mode 100644 Documentation/DocBook/v4l/vidioc-reqbufs.xml create mode 100644 Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml create mode 100644 Documentation/DocBook/v4l/vidioc-streamon.xml (limited to 'Documentation') diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 9632444f6c6..ad07875febc 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -14,7 +14,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ mac80211.xml debugobjects.xml sh.xml regulator.xml \ alsa-driver-api.xml writing-an-alsa-driver.xml \ - tracepoint.xml + tracepoint.xml media.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/dvb/audio.xml b/Documentation/DocBook/dvb/audio.xml new file mode 100644 index 00000000000..eeb96b8a086 --- /dev/null +++ b/Documentation/DocBook/dvb/audio.xml @@ -0,0 +1,1473 @@ +DVB Audio Device +The DVB audio device controls the MPEG2 audio decoder of the DVB hardware. It +can be accessed through /dev/dvb/adapter0/audio0. Data types and and +ioctl definitions can be accessed by including linux/dvb/video.h in your +application. + +Please note that some DVB cards don’t have their own MPEG decoder, which results in +the omission of the audio and video device. + + +
+Audio Data Types +This section describes the structures, data types and defines used when talking to the +audio device. + + +
+audio_stream_source_t +The audio stream source is set through the AUDIO_SELECT_SOURCE call and can take +the following values, depending on whether we are replaying from an internal (demux) or +external (user write) source. + + + typedef enum { + AUDIO_SOURCE_DEMUX, + AUDIO_SOURCE_MEMORY + } audio_stream_source_t; + +AUDIO_SOURCE_DEMUX selects the demultiplexer (fed either by the frontend or the +DVR device) as the source of the video stream. If AUDIO_SOURCE_MEMORY +is selected the stream comes from the application through the write() system +call. + + +
+
+audio_play_state_t +The following values can be returned by the AUDIO_GET_STATUS call representing the +state of audio playback. + + + typedef enum { + AUDIO_STOPPED, + AUDIO_PLAYING, + AUDIO_PAUSED + } audio_play_state_t; + + +
+
+audio_channel_select_t +The audio channel selected via AUDIO_CHANNEL_SELECT is determined by the +following values. + + + typedef enum { + AUDIO_STEREO, + AUDIO_MONO_LEFT, + AUDIO_MONO_RIGHT, + } audio_channel_select_t; + + +
+
+struct audio_status +The AUDIO_GET_STATUS call returns the following structure informing about various +states of the playback operation. + + + typedef struct audio_status { + boolean AV_sync_state; + boolean mute_state; + audio_play_state_t play_state; + audio_stream_source_t stream_source; + audio_channel_select_t channel_select; + boolean bypass_mode; + } audio_status_t; + + +
+
+struct audio_mixer +The following structure is used by the AUDIO_SET_MIXER call to set the audio +volume. + + + typedef struct audio_mixer { + unsigned int volume_left; + unsigned int volume_right; + } audio_mixer_t; + + +
+
+audio encodings +A call to AUDIO_GET_CAPABILITIES returns an unsigned integer with the following +bits set according to the hardwares capabilities. + + + #define AUDIO_CAP_DTS 1 + #define AUDIO_CAP_LPCM 2 + #define AUDIO_CAP_MP1 4 + #define AUDIO_CAP_MP2 8 + #define AUDIO_CAP_MP3 16 + #define AUDIO_CAP_AAC 32 + #define AUDIO_CAP_OGG 64 + #define AUDIO_CAP_SDDS 128 + #define AUDIO_CAP_AC3 256 + + +
+
+struct audio_karaoke +The ioctl AUDIO_SET_KARAOKE uses the following format: + + + typedef + struct audio_karaoke{ + int vocal1; + int vocal2; + int melody; + } audio_karaoke_t; + +If Vocal1 or Vocal2 are non-zero, they get mixed into left and right t at 70% each. If both, +Vocal1 and Vocal2 are non-zero, Vocal1 gets mixed into the left channel and Vocal2 into the +right channel at 100% each. Ff Melody is non-zero, the melody channel gets mixed into left +and right. + + +
+
+audio attributes +The following attributes can be set by a call to AUDIO_SET_ATTRIBUTES: + + + typedef uint16_t audio_attributes_t; + /⋆ bits: descr. ⋆/ + /⋆ 15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, ⋆/ + /⋆ 12 multichannel extension ⋆/ + /⋆ 11-10 audio type (0=not spec, 1=language included) ⋆/ + /⋆ 9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) ⋆/ + /⋆ 7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit, ⋆/ + /⋆ 5- 4 Sample frequency fs (0=48kHz, 1=96kHz) ⋆/ + /⋆ 2- 0 number of audio channels (n+1 channels) ⋆/ + +
+
+Audio Function Calls + + +
+open() +DESCRIPTION + + +This system call opens a named audio device (e.g. /dev/dvb/adapter0/audio0) + for subsequent use. When an open() call has succeeded, the device will be ready + for use. The significance of blocking or non-blocking mode is described in the + documentation for functions where there is a difference. It does not affect the + semantics of the open() call itself. A device opened in blocking mode can later + be put into non-blocking mode (and vice versa) using the F_SETFL command + of the fcntl system call. This is a standard system call, documented in the Linux + manual page for fcntl. Only one user can open the Audio Device in O_RDWR + mode. All other attempts to open the device in this mode will fail, and an error + code will be returned. If the Audio Device is opened in O_RDONLY mode, the + only ioctl call that can be used is AUDIO_GET_STATUS. All other call will + return with an error code. + + +SYNOPSIS + + +int open(const char ⋆deviceName, int flags); + + +PARAMETERS + + +const char + *deviceName + +Name of specific audio device. + + +int flags + +A bit-wise OR of the following flags: + + + +O_RDONLY read-only access + + + +O_RDWR read/write access + + + +O_NONBLOCK open in non-blocking mode + + + +(blocking mode is the default) + + +ERRORS + + +ENODEV + +Device driver not loaded/available. + + +EINTERNAL + +Internal error. + + +EBUSY + +Device or resource busy. + + +EINVAL + +Invalid argument. + + + +
+
+close() +DESCRIPTION + + +This system call closes a previously opened audio device. + + +SYNOPSIS + + +int close(int fd); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + + +
+
+write() +DESCRIPTION + + +This system call can only be used if AUDIO_SOURCE_MEMORY is selected + in the ioctl call AUDIO_SELECT_SOURCE. The data provided shall be in + PES format. If O_NONBLOCK is not specified the function will block until + buffer space is available. The amount of data to be transferred is implied by + count. + + +SYNOPSIS + + +size_t write(int fd, const void ⋆buf, size_t count); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +void *buf + +Pointer to the buffer containing the PES data. + + +size_t count + +Size of buf. + + +ERRORS + + +EPERM + +Mode AUDIO_SOURCE_MEMORY not selected. + + +ENOMEM + +Attempted to write more data than the internal buffer can + hold. + + +EBADF + +fd is not a valid open file descriptor. + + + +
AUDIO_STOP +DESCRIPTION + + +This ioctl call asks the Audio Device to stop playing the current stream. + + +SYNOPSIS + + +int ioctl(int fd, int request = AUDIO_STOP); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_STOP for this command. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error. + + + +
AUDIO_PLAY +DESCRIPTION + + +This ioctl call asks the Audio Device to start playing an audio stream from the + selected source. + + +SYNOPSIS + + +int ioctl(int fd, int request = AUDIO_PLAY); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_PLAY for this command. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error. + + + +
AUDIO_PAUSE +DESCRIPTION + + +This ioctl call suspends the audio stream being played. Decoding and playing + are paused. It is then possible to restart again decoding and playing process of + the audio stream using AUDIO_CONTINUE command. + + +If AUDIO_SOURCE_MEMORY is selected in the ioctl call + AUDIO_SELECT_SOURCE, the DVB-subsystem will not decode (consume) + any more data until the ioctl call AUDIO_CONTINUE or AUDIO_PLAY is + performed. + + +SYNOPSIS + + +int ioctl(int fd, int request = AUDIO_PAUSE); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_PAUSE for this command. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + + +
AUDIO_SELECT_SOURCE +DESCRIPTION + + +This ioctl call informs the audio device which source shall be used + for the input data. The possible sources are demux or memory. If + AUDIO_SOURCE_MEMORY is selected, the data is fed to the Audio Device + through the write command. + + +SYNOPSIS + + +int ioctl(int fd, int request = AUDIO_SELECT_SOURCE, + audio_stream_source_t source); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_SELECT_SOURCE for this command. + + +audio_stream_source_t + source + +Indicates the source that shall be used for the Audio + stream. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + +EINVAL + +Illegal input parameter. + + + +
AUDIO_SET_MUTE +DESCRIPTION + + +This ioctl call asks the audio device to mute the stream that is currently being + played. + + +SYNOPSIS + + +int ioctl(int fd, int request = AUDIO_SET_MUTE, + boolean state); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_SET_MUTE for this command. + + +boolean state + +Indicates if audio device shall mute or not. + + + +TRUE Audio Mute + + + +FALSE Audio Un-mute + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + +EINVAL + +Illegal input parameter. + + + +
AUDIO_SET_AV_SYNC +DESCRIPTION + + +This ioctl call asks the Audio Device to turn ON or OFF A/V synchronization. + + +SYNOPSIS + + +int ioctl(int fd, int request = AUDIO_SET_AV_SYNC, + boolean state); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_AV_SYNC for this command. + + +boolean state + +Tells the DVB subsystem if A/V synchronization shall be + ON or OFF. + + + +TRUE AV-sync ON + + + +FALSE AV-sync OFF + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + +EINVAL + +Illegal input parameter. + + + +
AUDIO_SET_BYPASS_MODE +DESCRIPTION + + +This ioctl call asks the Audio Device to bypass the Audio decoder and forward + the stream without decoding. This mode shall be used if streams that can’t be + handled by the DVB system shall be decoded. Dolby DigitalTM streams are + automatically forwarded by the DVB subsystem if the hardware can handle it. + + +SYNOPSIS + + +int ioctl(int fd, int request = + AUDIO_SET_BYPASS_MODE, boolean mode); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_SET_BYPASS_MODE for this + command. + + +boolean mode + +Enables or disables the decoding of the current Audio + stream in the DVB subsystem. + + + +TRUE Bypass is disabled + + + +FALSE Bypass is enabled + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + +EINVAL + +Illegal input parameter. + + + +
AUDIO_CHANNEL_SELECT +DESCRIPTION + + +This ioctl call asks the Audio Device to select the requested channel if possible. + + +SYNOPSIS + + +int ioctl(int fd, int request = + AUDIO_CHANNEL_SELECT, audio_channel_select_t); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_CHANNEL_SELECT for this + command. + + +audio_channel_select_t + ch + +Select the output format of the audio (mono left/right, + stereo). + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + +EINVAL + +Illegal input parameter ch. + + + +
AUDIO_GET_STATUS +DESCRIPTION + + +This ioctl call asks the Audio Device to return the current state of the Audio + Device. + + +SYNOPSIS + + +int ioctl(int fd, int request = AUDIO_GET_STATUS, + struct audio_status ⋆status); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_GET_STATUS for this command. + + +struct audio_status + *status + +Returns the current state of Audio Device. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + +EFAULT + +status points to invalid address. + + + +
AUDIO_GET_CAPABILITIES +DESCRIPTION + + +This ioctl call asks the Audio Device to tell us about the decoding capabilities + of the audio hardware. + + +SYNOPSIS + + +int ioctl(int fd, int request = + AUDIO_GET_CAPABILITIES, unsigned int ⋆cap); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_GET_CAPABILITIES for this + command. + + +unsigned int *cap + +Returns a bit array of supported sound formats. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + +EFAULT + +cap points to an invalid address. + + + +
AUDIO_CLEAR_BUFFER +DESCRIPTION + + +This ioctl call asks the Audio Device to clear all software and hardware buffers + of the audio decoder device. + + +SYNOPSIS + + +int ioctl(int fd, int request = AUDIO_CLEAR_BUFFER); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_CLEAR_BUFFER for this command. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + + +
AUDIO_SET_ID +DESCRIPTION + + +This ioctl selects which sub-stream is to be decoded if a program or system + stream is sent to the video device. If no audio stream type is set the id has to be + in [0xC0,0xDF] for MPEG sound, in [0x80,0x87] for AC3 and in [0xA0,0xA7] + for LPCM. More specifications may follow for other stream types. If the stream + type is set the id just specifies the substream id of the audio stream and only + the first 5 bits are recognized. + + +SYNOPSIS + + +int ioctl(int fd, int request = AUDIO_SET_ID, int + id); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_SET_ID for this command. + + +int id + +audio sub-stream id + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + +EINVAL + +Invalid sub-stream id. + + + +
AUDIO_SET_MIXER +DESCRIPTION + + +This ioctl lets you adjust the mixer settings of the audio decoder. + + +SYNOPSIS + + +int ioctl(int fd, int request = AUDIO_SET_MIXER, + audio_mixer_t ⋆mix); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_SET_ID for this command. + + +audio_mixer_t *mix + +mixer settings. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + +EFAULT + +mix points to an invalid address. + + + +
AUDIO_SET_STREAMTYPE +DESCRIPTION + + +This ioctl tells the driver which kind of audio stream to expect. This is useful + if the stream offers several audio sub-streams like LPCM and AC3. + + +SYNOPSIS + + +int ioctl(fd, int request = AUDIO_SET_STREAMTYPE, + int type); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_SET_STREAMTYPE for this + command. + + +int type + +stream type + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINVAL + +type is not a valid or supported stream type. + + + +
AUDIO_SET_EXT_ID +DESCRIPTION + + +This ioctl can be used to set the extension id for MPEG streams in DVD + playback. Only the first 3 bits are recognized. + + +SYNOPSIS + + +int ioctl(fd, int request = AUDIO_SET_EXT_ID, int + id); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_SET_EXT_ID for this command. + + +int id + +audio sub_stream_id + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINVAL + +id is not a valid id. + + + +
AUDIO_SET_ATTRIBUTES +DESCRIPTION + + +This ioctl is intended for DVD playback and allows you to set certain + information about the audio stream. + + +SYNOPSIS + + +int ioctl(fd, int request = AUDIO_SET_ATTRIBUTES, + audio_attributes_t attr ); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_SET_ATTRIBUTES for this command. + + +audio_attributes_t + attr + +audio attributes according to section ?? + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINVAL + +attr is not a valid or supported attribute setting. + + + +
AUDIO_SET_KARAOKE +DESCRIPTION + + +This ioctl allows one to set the mixer settings for a karaoke DVD. + + +SYNOPSIS + + +int ioctl(fd, int request = AUDIO_SET_STREAMTYPE, + audio_karaoke_t ⋆karaoke); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_SET_STREAMTYPE for this + command. + + +audio_karaoke_t + *karaoke + +karaoke settings according to section ??. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINVAL + +karaoke is not a valid or supported karaoke setting. + + +
+
diff --git a/Documentation/DocBook/dvb/ca.xml b/Documentation/DocBook/dvb/ca.xml new file mode 100644 index 00000000000..b1f1d2fad65 --- /dev/null +++ b/Documentation/DocBook/dvb/ca.xml @@ -0,0 +1,221 @@ +DVB CA Device +The DVB CA device controls the conditional access hardware. It can be accessed through +/dev/dvb/adapter0/ca0. Data types and and ioctl definitions can be accessed by +including linux/dvb/ca.h in your application. + + +
+CA Data Types + + +
+ca_slot_info_t + + /⋆ slot interface types and info ⋆/ + + typedef struct ca_slot_info_s { + int num; /⋆ slot number ⋆/ + + int type; /⋆ CA interface this slot supports ⋆/ + #define CA_CI 1 /⋆ CI high level interface ⋆/ + #define CA_CI_LINK 2 /⋆ CI link layer level interface ⋆/ + #define CA_CI_PHYS 4 /⋆ CI physical layer level interface ⋆/ + #define CA_SC 128 /⋆ simple smart card interface ⋆/ + + unsigned int flags; + #define CA_CI_MODULE_PRESENT 1 /⋆ module (or card) inserted ⋆/ + #define CA_CI_MODULE_READY 2 + } ca_slot_info_t; + + +
+
+ca_descr_info_t + + typedef struct ca_descr_info_s { + unsigned int num; /⋆ number of available descramblers (keys) ⋆/ + unsigned int type; /⋆ type of supported scrambling system ⋆/ + #define CA_ECD 1 + #define CA_NDS 2 + #define CA_DSS 4 + } ca_descr_info_t; + + +
+
+ca_cap_t + + typedef struct ca_cap_s { + unsigned int slot_num; /⋆ total number of CA card and module slots ⋆/ + unsigned int slot_type; /⋆ OR of all supported types ⋆/ + unsigned int descr_num; /⋆ total number of descrambler slots (keys) ⋆/ + unsigned int descr_type;/⋆ OR of all supported types ⋆/ + } ca_cap_t; + + +
+
+ca_msg_t + + /⋆ a message to/from a CI-CAM ⋆/ + typedef struct ca_msg_s { + unsigned int index; + unsigned int type; + unsigned int length; + unsigned char msg[256]; + } ca_msg_t; + + +
+
+ca_descr_t + + typedef struct ca_descr_s { + unsigned int index; + unsigned int parity; + unsigned char cw[8]; + } ca_descr_t; + +
+
+CA Function Calls + + +
+open() +DESCRIPTION + + +This system call opens a named ca device (e.g. /dev/ost/ca) for subsequent use. +When an open() call has succeeded, the device will be ready for use. + The significance of blocking or non-blocking mode is described in the + documentation for functions where there is a difference. It does not affect the + semantics of the open() call itself. A device opened in blocking mode can later + be put into non-blocking mode (and vice versa) using the F_SETFL command + of the fcntl system call. This is a standard system call, documented in the Linux + manual page for fcntl. Only one user can open the CA Device in O_RDWR + mode. All other attempts to open the device in this mode will fail, and an error + code will be returned. + + +SYNOPSIS + + +int open(const char ⋆deviceName, int flags); + + +PARAMETERS + + +const char + *deviceName + +Name of specific video device. + + +int flags + +A bit-wise OR of the following flags: + + + +O_RDONLY read-only access + + + +O_RDWR read/write access + + + +O_NONBLOCK open in non-blocking mode + + + +(blocking mode is the default) + + +ERRORS + + +ENODEV + +Device driver not loaded/available. + + +EINTERNAL + +Internal error. + + +EBUSY + +Device or resource busy. + + +EINVAL + +Invalid argument. + + + +
+
+close() +DESCRIPTION + + +This system call closes a previously opened audio device. + + +SYNOPSIS + + +int close(int fd); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +
+
diff --git a/Documentation/DocBook/dvb/demux.xml b/Documentation/DocBook/dvb/demux.xml new file mode 100644 index 00000000000..1b8c4e9835b --- /dev/null +++ b/Documentation/DocBook/dvb/demux.xml @@ -0,0 +1,973 @@ +DVB Demux Device + +The DVB demux device controls the filters of the DVB hardware/software. It can be +accessed through /dev/adapter0/demux0. Data types and and ioctl definitions can be +accessed by including linux/dvb/dmx.h in your application. + +
+Demux Data Types + +
+dmx_output_t + + typedef enum + { + DMX_OUT_DECODER, + DMX_OUT_TAP, + DMX_OUT_TS_TAP + } dmx_output_t; + +DMX_OUT_TAP delivers the stream output to the demux device on which the ioctl is +called. + +DMX_OUT_TS_TAP routes output to the logical DVR device /dev/dvb/adapter0/dvr0, +which delivers a TS multiplexed from all filters for which DMX_OUT_TS_TAP was +specified. + +
+ +
+dmx_input_t + + typedef enum + { + DMX_IN_FRONTEND, + DMX_IN_DVR + } dmx_input_t; + +
+ +
+dmx_pes_type_t + + typedef enum + { + DMX_PES_AUDIO, + DMX_PES_VIDEO, + DMX_PES_TELETEXT, + DMX_PES_SUBTITLE, + DMX_PES_PCR, + DMX_PES_OTHER + } dmx_pes_type_t; + +
+ +
+dmx_event_t + + typedef enum + { + DMX_SCRAMBLING_EV, + DMX_FRONTEND_EV + } dmx_event_t; + +
+ +
+dmx_scrambling_status_t + + typedef enum + { + DMX_SCRAMBLING_OFF, + DMX_SCRAMBLING_ON + } dmx_scrambling_status_t; + +
+ +
+struct dmx_filter + + typedef struct dmx_filter + { + uint8_t filter[DMX_FILTER_SIZE]; + uint8_t mask[DMX_FILTER_SIZE]; + } dmx_filter_t; + +
+ +
+struct dmx_sct_filter_params + + struct dmx_sct_filter_params + { + uint16_t pid; + dmx_filter_t filter; + uint32_t timeout; + uint32_t flags; + #define DMX_CHECK_CRC 1 + #define DMX_ONESHOT 2 + #define DMX_IMMEDIATE_START 4 + }; + +
+ +
+struct dmx_pes_filter_params + + struct dmx_pes_filter_params + { + uint16_t pid; + dmx_input_t input; + dmx_output_t output; + dmx_pes_type_t pes_type; + uint32_t flags; + }; + +
+ +
+struct dmx_event + + struct dmx_event + { + dmx_event_t event; + time_t timeStamp; + union + { + dmx_scrambling_status_t scrambling; + } u; + }; + +
+ +
+struct dmx_stc + + struct dmx_stc { + unsigned int num; /⋆ input : which STC? 0..N ⋆/ + unsigned int base; /⋆ output: divisor for stc to get 90 kHz clock ⋆/ + uint64_t stc; /⋆ output: stc in 'base'⋆90 kHz units ⋆/ + }; + +
+ +
+ +
+Demux Function Calls + +
+open() +DESCRIPTION + + +This system call, used with a device name of /dev/dvb/adapter0/demux0, + allocates a new filter and returns a handle which can be used for subsequent + control of that filter. This call has to be made for each filter to be used, i.e. every + returned file descriptor is a reference to a single filter. /dev/dvb/adapter0/dvr0 + is a logical device to be used for retrieving Transport Streams for digital + video recording. When reading from this device a transport stream containing + the packets from all PES filters set in the corresponding demux device + (/dev/dvb/adapter0/demux0) having the output set to DMX_OUT_TS_TAP. A + recorded Transport Stream is replayed by writing to this device. +The significance of blocking or non-blocking mode is described in the + documentation for functions where there is a difference. It does not affect the + semantics of the open() call itself. A device opened in blocking mode can later + be put into non-blocking mode (and vice versa) using the F_SETFL command + of the fcntl system call. + + +SYNOPSIS + + +int open(const char ⋆deviceName, int flags); + + +PARAMETERS + + +const char + *deviceName + +Name of demux device. + + +int flags + +A bit-wise OR of the following flags: + + + +O_RDWR read/write access + + + +O_NONBLOCK open in non-blocking mode + + + +(blocking mode is the default) + + +ERRORS + + +ENODEV + +Device driver not loaded/available. + + +EINVAL + +Invalid argument. + + +EMFILE + +“Too many open files”, i.e. no more filters available. + + +ENOMEM + +The driver failed to allocate enough memory. + + +
+ +
+close() +DESCRIPTION + + +This system call deactivates and deallocates a filter that was previously + allocated via the open() call. + + +SYNOPSIS + + +int close(int fd); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +
+ +
+read() +DESCRIPTION + + +This system call returns filtered data, which might be section or PES data. The + filtered data is transferred from the driver’s internal circular buffer to buf. The + maximum amount of data to be transferred is implied by count. + + +When returning section data the driver always tries to return a complete single + section (even though buf would provide buffer space for more data). If the size + of the buffer is smaller than the section as much as possible will be returned, + and the remaining data will be provided in subsequent calls. + + +The size of the internal buffer is 2 * 4096 bytes (the size of two maximum + sized sections) by default. The size of this buffer may be changed by using the + DMX_SET_BUFFER_SIZE function. If the buffer is not large enough, or if + the read operations are not performed fast enough, this may result in a buffer + overflow error. In this case EOVERFLOW will be returned, and the circular + buffer will be emptied. This call is blocking if there is no data to return, i.e. the + process will be put to sleep waiting for data, unless the O_NONBLOCK flag + is specified. + + +Note that in order to be able to read, the filtering process has to be started + by defining either a section or a PES filter by means of the ioctl functions, + and then starting the filtering process via the DMX_START ioctl function + or by setting the DMX_IMMEDIATE_START flag. If the reading is done + from a logical DVR demux device, the data will constitute a Transport Stream + including the packets from all PES filters in the corresponding demux device + /dev/dvb/adapter0/demux0 having the output set to DMX_OUT_TS_TAP. + + +SYNOPSIS + + +size_t read(int fd, void ⋆buf, size_t count); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +void *buf + +Pointer to the buffer to be used for returned filtered data. + + +size_t count + +Size of buf. + + +ERRORS + + +EWOULDBLOCK + +No data to return and O_NONBLOCK was specified. + + +EBADF + +fd is not a valid open file descriptor. + + +ECRC + +Last section had a CRC error - no data returned. The + buffer is flushed. + + +EOVERFLOW + + + + +The filtered data was not read from the buffer in due + time, resulting in non-read data being lost. The buffer is + flushed. + + +ETIMEDOUT + +The section was not loaded within the stated timeout + period. See ioctl DMX_SET_FILTER for how to set a + timeout. + + +EFAULT + +The driver failed to write to the callers buffer due to an + invalid *buf pointer. + + +
+ +
+write() +DESCRIPTION + + +This system call is only provided by the logical device /dev/dvb/adapter0/dvr0, + associated with the physical demux device that provides the actual DVR + functionality. It is used for replay of a digitally recorded Transport Stream. + Matching filters have to be defined in the corresponding physical demux + device, /dev/dvb/adapter0/demux0. The amount of data to be transferred is + implied by count. + + +SYNOPSIS + + +ssize_t write(int fd, const void ⋆buf, size_t + count); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +void *buf + +Pointer to the buffer containing the Transport Stream. + + +size_t count + +Size of buf. + + +ERRORS + + +EWOULDBLOCK + +No data was written. This + might happen if O_NONBLOCK was specified and there + is no more buffer space available (if O_NONBLOCK is + not specified the function will block until buffer space is + available). + + +EBUSY + +This error code indicates that there are conflicting + requests. The corresponding demux device is setup to + receive data from the front- end. Make sure that these + filters are stopped and that the filters with input set to + DMX_IN_DVR are started. + + +EBADF + +fd is not a valid open file descriptor. + + +
+ +
+DMX_START +DESCRIPTION + + +This ioctl call is used to start the actual filtering operation defined via the ioctl + calls DMX_SET_FILTER or DMX_SET_PES_FILTER. + + +SYNOPSIS + + +int ioctl( int fd, int request = DMX_START); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_START for this command. + + +ERRORS + + +EBADF + +fd is not a valid file descriptor. + + +EINVAL + +Invalid argument, i.e. no filtering parameters provided via + the DMX_SET_FILTER or DMX_SET_PES_FILTER + functions. + + +EBUSY + +This error code indicates that there are conflicting + requests. There are active filters filtering data from + another input source. Make sure that these filters are + stopped before starting this filter. + + +
+ +
+DMX_STOP +DESCRIPTION + + +This ioctl call is used to stop the actual filtering operation defined via the + ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER and started via + the DMX_START command. + + +SYNOPSIS + + +int ioctl( int fd, int request = DMX_STOP); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_STOP for this command. + + +ERRORS + + +EBADF + +fd is not a valid file descriptor. + + +
+ +
+DMX_SET_FILTER +DESCRIPTION + + +This ioctl call sets up a filter according to the filter and mask parameters + provided. A timeout may be defined stating number of seconds to wait for a + section to be loaded. A value of 0 means that no timeout should be applied. + Finally there is a flag field where it is possible to state whether a section should + be CRC-checked, whether the filter should be a ”one-shot” filter, i.e. if the + filtering operation should be stopped after the first section is received, and + whether the filtering operation should be started immediately (without waiting + for a DMX_START ioctl call). If a filter was previously set-up, this filter will + be canceled, and the receive buffer will be flushed. + + +SYNOPSIS + + +int ioctl( int fd, int request = DMX_SET_FILTER, + struct dmx_sct_filter_params ⋆params); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_SET_FILTER for this command. + + +struct + dmx_sct_filter_params + *params + +Pointer to structure containing filter parameters. + + +ERRORS + + +EBADF + +fd is not a valid file descriptor. + + +EINVAL + +Invalid argument. + + +
+ +
+DMX_SET_PES_FILTER +DESCRIPTION + + +This ioctl call sets up a PES filter according to the parameters provided. By a + PES filter is meant a filter that is based just on the packet identifier (PID), i.e. + no PES header or payload filtering capability is supported. + + +The transport stream destination for the filtered output may be set. Also the + PES type may be stated in order to be able to e.g. direct a video stream directly + to the video decoder. Finally there is a flag field where it is possible to state + whether the filtering operation should be started immediately (without waiting + for a DMX_START ioctl call). If a filter was previously set-up, this filter will + be cancelled, and the receive buffer will be flushed. + + +SYNOPSIS + + +int ioctl( int fd, int request = DMX_SET_PES_FILTER, + struct dmx_pes_filter_params ⋆params); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_SET_PES_FILTER for this command. + + +struct + dmx_pes_filter_params + *params + +Pointer to structure containing filter parameters. + + +ERRORS + + +EBADF + +fd is not a valid file descriptor. + + +EINVAL + +Invalid argument. + + +EBUSY + +This error code indicates that there are conflicting + requests. There are active filters filtering data from + another input source. Make sure that these filters are + stopped before starting this filter. + + +
+ +
+DMX_SET_BUFFER_SIZE +DESCRIPTION + + +This ioctl call is used to set the size of the circular buffer used for filtered data. + The default size is two maximum sized sections, i.e. if this function is not called + a buffer size of 2 * 4096 bytes will be used. + + +SYNOPSIS + + +int ioctl( int fd, int request = + DMX_SET_BUFFER_SIZE, unsigned long size); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_SET_BUFFER_SIZE for this command. + + +unsigned long size + +Size of circular buffer. + + +ERRORS + + +EBADF + +fd is not a valid file descriptor. + + +ENOMEM + +The driver was not able to allocate a buffer of the + requested size. + + +
+ +
+DMX_GET_EVENT +DESCRIPTION + + +This ioctl call returns an event if available. If an event is not available, + the behavior depends on whether the device is in blocking or non-blocking + mode. In the latter case, the call fails immediately with errno set to + EWOULDBLOCK. In the former case, the call blocks until an event becomes + available. + + +The standard Linux poll() and/or select() system calls can be used with the + device file descriptor to watch for new events. For select(), the file descriptor + should be included in the exceptfds argument, and for poll(), POLLPRI should + be specified as the wake-up condition. Only the latest event for each filter is + saved. + + +SYNOPSIS + + +int ioctl( int fd, int request = DMX_GET_EVENT, + struct dmx_event ⋆ev); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_GET_EVENT for this command. + + +struct dmx_event *ev + +Pointer to the location where the event is to be stored. + + +ERRORS + + +EBADF + +fd is not a valid file descriptor. + + +EFAULT + +ev points to an invalid address. + + +EWOULDBLOCK + +There is no event pending, and the device is in + non-blocking mode. + + +
+ +
+DMX_GET_STC +DESCRIPTION + + +This ioctl call returns the current value of the system time counter (which is driven + by a PES filter of type DMX_PES_PCR). Some hardware supports more than one + STC, so you must specify which one by setting the num field of stc before the ioctl + (range 0...n). The result is returned in form of a ratio with a 64 bit numerator + and a 32 bit denominator, so the real 90kHz STC value is stc->stc / + stc->base + . + + +SYNOPSIS + + +int ioctl( int fd, int request = DMX_GET_STC, struct + dmx_stc ⋆stc); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_GET_STC for this command. + + +struct dmx_stc *stc + +Pointer to the location where the stc is to be stored. + + +ERRORS + + +EBADF + +fd is not a valid file descriptor. + + +EFAULT + +stc points to an invalid address. + + +EINVAL + +Invalid stc number. + + +
diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/dvb/dvbapi.xml new file mode 100644 index 00000000000..d53ca4e98e8 --- /dev/null +++ b/Documentation/DocBook/dvb/dvbapi.xml @@ -0,0 +1,79 @@ + + + +Ralph +Metzler +J. K. +
rjkm@metzlerbros.de
 + + +Marcus +Metzler +O. C. +
rjkm@metzlerbros.de
 + + +Mauro +Chehab +Carvalho +
mchehab@redhat.com
 +Ported document to Docbook XML. + + + + 2002 + 2003 + 2009 + Convergence GmbH + + + + + +2.0.0 +2009-09-06 +mcc +Conversion from LaTex to DocBook XML. The + contents is the same as the original LaTex version. + + +1.0.0 +2003-07-24 +rjkm +Initial revision on LaTEX. + + + + + +LINUX DVB API +Version 3 + + + &sub-intro; + + + &sub-frontend; + + + &sub-demux; + + + &sub-video; + + + &sub-audio; + + + &sub-ca; + + + &sub-net; + + + &sub-kdapi; + + + &sub-examples; + + diff --git a/Documentation/DocBook/dvb/dvbstb.pdf b/Documentation/DocBook/dvb/dvbstb.pdf new file mode 100644 index 00000000000..0fa75d90c3e Binary files /dev/null and b/Documentation/DocBook/dvb/dvbstb.pdf differ diff --git a/Documentation/DocBook/dvb/dvbstb.png b/Documentation/DocBook/dvb/dvbstb.png new file mode 100644 index 00000000000..9b8f372e7af Binary files /dev/null and b/Documentation/DocBook/dvb/dvbstb.png differ diff --git a/Documentation/DocBook/dvb/examples.xml b/Documentation/DocBook/dvb/examples.xml new file mode 100644 index 00000000000..b89dceda604 --- /dev/null +++ b/Documentation/DocBook/dvb/examples.xml @@ -0,0 +1,365 @@ +Examples +In this section we would like to present some examples for using the DVB API. + +Maintainer note: This section is out of date. Please refer to the sample programs packaged +with the driver distribution from http://linuxtv.org/. + + +
+Tuning +We will start with a generic tuning subroutine that uses the frontend and SEC, as well as +the demux devices. The example is given for QPSK tuners, but can easily be adjusted for +QAM. + + + #include <sys/ioctl.h> + #include <stdio.h> + #include <stdint.h> + #include <sys/types.h> + #include <sys/stat.h> + #include <fcntl.h> + #include <time.h> + #include <unistd.h> + + #include <linux/dvb/dmx.h> + #include <linux/dvb/frontend.h> + #include <linux/dvb/sec.h> + #include <sys/poll.h> + + #define DMX "/dev/dvb/adapter0/demux1" + #define FRONT "/dev/dvb/adapter0/frontend1" + #define SEC "/dev/dvb/adapter0/sec1" + + /⋆ routine for checking if we have a signal and other status information⋆/ + int FEReadStatus(int fd, fe_status_t ⋆stat) + { + int ans; + + if ( (ans = ioctl(fd,FE_READ_STATUS,stat) < 0)){ + perror("FE READ STATUS: "); + return -1; + } + + if (⋆stat & FE_HAS_POWER) + printf("FE HAS POWER\n"); + + if (⋆stat & FE_HAS_SIGNAL) + printf("FE HAS SIGNAL\n"); + + if (⋆stat & FE_SPECTRUM_INV) + printf("SPEKTRUM INV\n"); + + return 0; + } + + + /⋆ tune qpsk ⋆/ + /⋆ freq: frequency of transponder ⋆/ + /⋆ vpid, apid, tpid: PIDs of video, audio and teletext TS packets ⋆/ + /⋆ diseqc: DiSEqC address of the used LNB ⋆/ + /⋆ pol: Polarisation ⋆/ + /⋆ srate: Symbol Rate ⋆/ + /⋆ fec. FEC ⋆/ + /⋆ lnb_lof1: local frequency of lower LNB band ⋆/ + /⋆ lnb_lof2: local frequency of upper LNB band ⋆/ + /⋆ lnb_slof: switch frequency of LNB ⋆/ + + int set_qpsk_channel(int freq, int vpid, int apid, int tpid, + int diseqc, int pol, int srate, int fec, int lnb_lof1, + int lnb_lof2, int lnb_slof) + { + struct secCommand scmd; + struct secCmdSequence scmds; + struct dmx_pes_filter_params pesFilterParams; + FrontendParameters frp; + struct pollfd pfd[1]; + FrontendEvent event; + int demux1, demux2, demux3, front; + + frequency = (uint32_t) freq; + symbolrate = (uint32_t) srate; + + if((front = open(FRONT,O_RDWR)) < 0){ + perror("FRONTEND DEVICE: "); + return -1; + } + + if((sec = open(SEC,O_RDWR)) < 0){ + perror("SEC DEVICE: "); + return -1; + } + + if (demux1 < 0){ + if ((demux1=open(DMX, O_RDWR|O_NONBLOCK)) + < 0){ + perror("DEMUX DEVICE: "); + return -1; + } + } + + if (demux2 < 0){ + if ((demux2=open(DMX, O_RDWR|O_NONBLOCK)) + < 0){ + perror("DEMUX DEVICE: "); + return -1; + } + } + + if (demux3 < 0){ + if ((demux3=open(DMX, O_RDWR|O_NONBLOCK)) + < 0){ + perror("DEMUX DEVICE: "); + return -1; + } + } + + if (freq < lnb_slof) { + frp.Frequency = (freq - lnb_lof1); + scmds.continuousTone = SEC_TONE_OFF; + } else { + frp.Frequency = (freq - lnb_lof2); + scmds.continuousTone = SEC_TONE_ON; + } + frp.Inversion = INVERSION_AUTO; + if (pol) scmds.voltage = SEC_VOLTAGE_18; + else scmds.voltage = SEC_VOLTAGE_13; + + scmd.type=0; + scmd.u.diseqc.addr=0x10; + scmd.u.diseqc.cmd=0x38; + scmd.u.diseqc.numParams=1; + scmd.u.diseqc.params[0] = 0xF0 | ((diseqc ⋆ 4) & 0x0F) | + (scmds.continuousTone == SEC_TONE_ON ? 1 : 0) | + (scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0); + + scmds.miniCommand=SEC_MINI_NONE; + scmds.numCommands=1; + scmds.commands=&scmd; + if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){ + perror("SEC SEND: "); + return -1; + } + + if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){ + perror("SEC SEND: "); + return -1; + } + + frp.u.qpsk.SymbolRate = srate; + frp.u.qpsk.FEC_inner = fec; + + if (ioctl(front, FE_SET_FRONTEND, &frp) < 0){ + perror("QPSK TUNE: "); + return -1; + } + + pfd[0].fd = front; + pfd[0].events = POLLIN; + + if (poll(pfd,1,3000)){ + if (pfd[0].revents & POLLIN){ + printf("Getting QPSK event\n"); + if ( ioctl(front, FE_GET_EVENT, &event) + + == -EOVERFLOW){ + perror("qpsk get event"); + return -1; + } + printf("Received "); + switch(event.type){ + case FE_UNEXPECTED_EV: + printf("unexpected event\n"); + return -1; + case FE_FAILURE_EV: + printf("failure event\n"); + return -1; + + case FE_COMPLETION_EV: + printf("completion event\n"); + } + } + } + + + pesFilterParams.pid = vpid; + pesFilterParams.input = DMX_IN_FRONTEND; + pesFilterParams.output = DMX_OUT_DECODER; + pesFilterParams.pes_type = DMX_PES_VIDEO; + pesFilterParams.flags = DMX_IMMEDIATE_START; + if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ + perror("set_vpid"); + return -1; + } + + pesFilterParams.pid = apid; + pesFilterParams.input = DMX_IN_FRONTEND; + pesFilterParams.output = DMX_OUT_DECODER; + pesFilterParams.pes_type = DMX_PES_AUDIO; + pesFilterParams.flags = DMX_IMMEDIATE_START; + if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ + perror("set_apid"); + return -1; + } + + pesFilterParams.pid = tpid; + pesFilterParams.input = DMX_IN_FRONTEND; + pesFilterParams.output = DMX_OUT_DECODER; + pesFilterParams.pes_type = DMX_PES_TELETEXT; + pesFilterParams.flags = DMX_IMMEDIATE_START; + if (ioctl(demux3, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ + perror("set_tpid"); + return -1; + } + + return has_signal(fds); + } + + +The program assumes that you are using a universal LNB and a standard DiSEqC +switch with up to 4 addresses. Of course, you could build in some more checking if +tuning was successful and maybe try to repeat the tuning process. Depending on the +external hardware, i.e. LNB and DiSEqC switch, and weather conditions this may be +necessary. + +
+ +
+The DVR device +The following program code shows how to use the DVR device for recording. + + + #include <sys/ioctl.h> + #include <stdio.h> + #include <stdint.h> + #include <sys/types.h> + #include <sys/stat.h> + #include <fcntl.h> + #include <time.h> + #include <unistd.h> + + #include <linux/dvb/dmx.h> + #include <linux/dvb/video.h> + #include <sys/poll.h> + #define DVR "/dev/dvb/adapter0/dvr1" + #define AUDIO "/dev/dvb/adapter0/audio1" + #define VIDEO "/dev/dvb/adapter0/video1" + + #define BUFFY (188⋆20) + #define MAX_LENGTH (1024⋆1024⋆5) /⋆ record 5MB ⋆/ + + + /⋆ switch the demuxes to recording, assuming the transponder is tuned ⋆/ + + /⋆ demux1, demux2: file descriptor of video and audio filters ⋆/ + /⋆ vpid, apid: PIDs of video and audio channels ⋆/ + + int switch_to_record(int demux1, int demux2, uint16_t vpid, uint16_t apid) + { + struct dmx_pes_filter_params pesFilterParams; + + if (demux1 < 0){ + if ((demux1=open(DMX, O_RDWR|O_NONBLOCK)) + < 0){ + perror("DEMUX DEVICE: "); + return -1; + } + } + + if (demux2 < 0){ + if ((demux2=open(DMX, O_RDWR|O_NONBLOCK)) + < 0){ + perror("DEMUX DEVICE: "); + return -1; + } + } + + pesFilterParams.pid = vpid; + pesFilterParams.input = DMX_IN_FRONTEND; + pesFilterParams.output = DMX_OUT_TS_TAP; + pesFilterParams.pes_type = DMX_PES_VIDEO; + pesFilterParams.flags = DMX_IMMEDIATE_START; + if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ + perror("DEMUX DEVICE"); + return -1; + } + pesFilterParams.pid = apid; + pesFilterParams.input = DMX_IN_FRONTEND; + pesFilterParams.output = DMX_OUT_TS_TAP; + pesFilterParams.pes_type = DMX_PES_AUDIO; + pesFilterParams.flags = DMX_IMMEDIATE_START; + if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ + perror("DEMUX DEVICE"); + return -1; + } + return 0; + } + + /⋆ start recording MAX_LENGTH , assuming the transponder is tuned ⋆/ + + /⋆ demux1, demux2: file descriptor of video and audio filters ⋆/ + /⋆ vpid, apid: PIDs of video and audio channels ⋆/ + int record_dvr(int demux1, int demux2, uint16_t vpid, uint16_t apid) + { + int i; + int len; + int written; + uint8_t buf[BUFFY]; + uint64_t length; + struct pollfd pfd[1]; + int dvr, dvr_out; + + /⋆ open dvr device ⋆/ + if ((dvr = open(DVR, O_RDONLY|O_NONBLOCK)) < 0){ + perror("DVR DEVICE"); + return -1; + } + + /⋆ switch video and audio demuxes to dvr ⋆/ + printf ("Switching dvr on\n"); + i = switch_to_record(demux1, demux2, vpid, apid); + printf("finished: "); + + printf("Recording %2.0f MB of test file in TS format\n", + MAX_LENGTH/(1024.0⋆1024.0)); + length = 0; + + /⋆ open output file ⋆/ + if ((dvr_out = open(DVR_FILE,O_WRONLY|O_CREAT + |O_TRUNC, S_IRUSR|S_IWUSR + |S_IRGRP|S_IWGRP|S_IROTH| + S_IWOTH)) < 0){ + perror("Can't open file for dvr test"); + return -1; + } + + pfd[0].fd = dvr; + pfd[0].events = POLLIN; + + /⋆ poll for dvr data and write to file ⋆/ + while (length < MAX_LENGTH ) { + if (poll(pfd,1,1)){ + if (pfd[0].revents & POLLIN){ + len = read(dvr, buf, BUFFY); + if (len < 0){ + perror("recording"); + return -1; + } + if (len > 0){ + written = 0; + while (written < len) + written += + write (dvr_out, + buf, len); + length += len; + printf("written %2.0f MB\r", + length/1024./1024.); + } + } + } + } + return 0; + } + + + +
diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml new file mode 100644 index 00000000000..91a749f70cb --- /dev/null +++ b/Documentation/DocBook/dvb/frontend.xml @@ -0,0 +1,1765 @@ +DVB Frontend API + +The DVB frontend device controls the tuner and DVB demodulator +hardware. It can be accessed through /dev/dvb/adapter0/frontend0. Data types and and +ioctl definitions can be accessed by including linux/dvb/frontend.h in your application. + +DVB frontends come in three varieties: DVB-S (satellite), DVB-C +(cable) and DVB-T (terrestrial). Transmission via the internet (DVB-IP) +is not yet handled by this API but a future extension is possible. For +DVB-S the frontend device also supports satellite equipment control +(SEC) via DiSEqC and V-SEC protocols. The DiSEqC (digital SEC) +specification is available from Eutelsat http://www.eutelsat.org/. + +Note that the DVB API may also be used for MPEG decoder-only PCI +cards, in which case there exists no frontend device. + +
+Frontend Data Types + +
+frontend type + +For historical reasons frontend types are named after the type of modulation used in +transmission. + + typedef enum fe_type { + FE_QPSK, /⋆ DVB-S ⋆/ + FE_QAM, /⋆ DVB-C ⋆/ + FE_OFDM /⋆ DVB-T ⋆/ + } fe_type_t; + + +
+ +
+frontend capabilities + +Capabilities describe what a frontend can do. Some capabilities can only be supported for +a specific frontend type. + + typedef enum fe_caps { + FE_IS_STUPID = 0, + FE_CAN_INVERSION_AUTO = 0x1, + FE_CAN_FEC_1_2 = 0x2, + FE_CAN_FEC_2_3 = 0x4, + FE_CAN_FEC_3_4 = 0x8, + FE_CAN_FEC_4_5 = 0x10, + FE_CAN_FEC_5_6 = 0x20, + FE_CAN_FEC_6_7 = 0x40, + FE_CAN_FEC_7_8 = 0x80, + FE_CAN_FEC_8_9 = 0x100, + FE_CAN_FEC_AUTO = 0x200, + FE_CAN_QPSK = 0x400, + FE_CAN_QAM_16 = 0x800, + FE_CAN_QAM_32 = 0x1000, + FE_CAN_QAM_64 = 0x2000, + FE_CAN_QAM_128 = 0x4000, + FE_CAN_QAM_256 = 0x8000, + FE_CAN_QAM_AUTO = 0x10000, + FE_CAN_TRANSMISSION_MODE_AUTO = 0x20000, + FE_CAN_BANDWIDTH_AUTO = 0x40000, + FE_CAN_GUARD_INTERVAL_AUTO = 0x80000, + FE_CAN_HIERARCHY_AUTO = 0x100000, + FE_CAN_MUTE_TS = 0x80000000, + FE_CAN_CLEAN_SETUP = 0x40000000 + } fe_caps_t; + +
+ +
+frontend information + +Information about the frontend ca be queried with FE_GET_INFO. + + + struct dvb_frontend_info { + char name[128]; + fe_type_t type; + uint32_t frequency_min; + uint32_t frequency_max; + uint32_t frequency_stepsize; + uint32_t frequency_tolerance; + uint32_t symbol_rate_min; + uint32_t symbol_rate_max; + uint32_t symbol_rate_tolerance; /⋆ ppm ⋆/ + uint32_t notifier_delay; /⋆ ms ⋆/ + fe_caps_t caps; + }; + +
+ +
+diseqc master command + +A message sent from the frontend to DiSEqC capable equipment. + + struct dvb_diseqc_master_cmd { + uint8_t msg [6]; /⋆ { framing, address, command, data[3] } ⋆/ + uint8_t msg_len; /⋆ valid values are 3...6 ⋆/ + }; + +
+
+diseqc slave reply + +A reply to the frontend from DiSEqC 2.0 capable equipment. + + struct dvb_diseqc_slave_reply { + uint8_t msg [4]; /⋆ { framing, data [3] } ⋆/ + uint8_t msg_len; /⋆ valid values are 0...4, 0 means no msg ⋆/ + int timeout; /⋆ return from ioctl after timeout ms with ⋆/ + }; /⋆ errorcode when no message was received ⋆/ + +
+ +
+diseqc slave reply +The voltage is usually used with non-DiSEqC capable LNBs to switch the polarzation +(horizontal/vertical). When using DiSEqC epuipment this voltage has to be switched +consistently to the DiSEqC commands as described in the DiSEqC spec. + + typedef enum fe_sec_voltage { + SEC_VOLTAGE_13, + SEC_VOLTAGE_18 + } fe_sec_voltage_t; + +
+ +
+SEC continuous tone + +The continous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the +high/low band of a dual-band LNB. When using DiSEqC epuipment this voltage has to +be switched consistently to the DiSEqC commands as described in the DiSEqC +spec. + + typedef enum fe_sec_tone_mode { + SEC_TONE_ON, + SEC_TONE_OFF + } fe_sec_tone_mode_t; + +
+ +
+SEC tone burst + +The 22KHz tone burst is usually used with non-DiSEqC capable switches to select +between two connected LNBs/satellites. When using DiSEqC epuipment this voltage has to +be switched consistently to the DiSEqC commands as described in the DiSEqC +spec. + + typedef enum fe_sec_mini_cmd { + SEC_MINI_A, + SEC_MINI_B + } fe_sec_mini_cmd_t; + + + +
+ +
+frontend status +Several functions of the frontend device use the fe_status data type defined +by + + typedef enum fe_status { + FE_HAS_SIGNAL = 0x01, /⋆ found something above the noise level ⋆/ + FE_HAS_CARRIER = 0x02, /⋆ found a DVB signal ⋆/ + FE_HAS_VITERBI = 0x04, /⋆ FEC is stable ⋆/ + FE_HAS_SYNC = 0x08, /⋆ found sync bytes ⋆/ + FE_HAS_LOCK = 0x10, /⋆ everything's working... ⋆/ + FE_TIMEDOUT = 0x20, /⋆ no lock within the last ~2 seconds ⋆/ + FE_REINIT = 0x40 /⋆ frontend was reinitialized, ⋆/ + } fe_status_t; /⋆ application is recommned to reset ⋆/ + +to indicate the current state and/or state changes of the frontend hardware. + + +
+ +
+frontend parameters +The kind of parameters passed to the frontend device for tuning depend on +the kind of hardware you are using. All kinds of parameters are combined as an +union in the FrontendParameters structure: + + struct dvb_frontend_parameters { + uint32_t frequency; /⋆ (absolute) frequency in Hz for QAM/OFDM ⋆/ + /⋆ intermediate frequency in kHz for QPSK ⋆/ + fe_spectral_inversion_t inversion; + union { + struct dvb_qpsk_parameters qpsk; + struct dvb_qam_parameters qam; + struct dvb_ofdm_parameters ofdm; + } u; + }; + +For satellite QPSK frontends you have to use the QPSKParameters member defined by + + struct dvb_qpsk_parameters { + uint32_t symbol_rate; /⋆ symbol rate in Symbols per second ⋆/ + fe_code_rate_t fec_inner; /⋆ forward error correction (see above) ⋆/ + }; + +for cable QAM frontend you use the QAMParameters structure + + struct dvb_qam_parameters { + uint32_t symbol_rate; /⋆ symbol rate in Symbols per second ⋆/ + fe_code_rate_t fec_inner; /⋆ forward error correction (see above) ⋆/ + fe_modulation_t modulation; /⋆ modulation type (see above) ⋆/ + }; + +DVB-T frontends are supported by the OFDMParamters structure + + + struct dvb_ofdm_parameters { + fe_bandwidth_t bandwidth; + fe_code_rate_t code_rate_HP; /⋆ high priority stream code rate ⋆/ + fe_code_rate_t code_rate_LP; /⋆ low priority stream code rate ⋆/ + fe_modulation_t constellation; /⋆ modulation type (see above) ⋆/ + fe_transmit_mode_t transmission_mode; + fe_guard_interval_t guard_interval; + fe_hierarchy_t hierarchy_information; + }; + +In the case of QPSK frontends the Frequency field specifies the intermediate +frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of +the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and +OFDM frontends the Frequency specifies the absolute frequency and is given in +Hz. + +The Inversion field can take one of these values: + + + typedef enum fe_spectral_inversion { + INVERSION_OFF, + INVERSION_ON, + INVERSION_AUTO + } fe_spectral_inversion_t; + +It indicates if spectral inversion should be presumed or not. In the automatic setting +(INVERSION_AUTO) the hardware will try to figure out the correct setting by +itself. + +The possible values for the FEC_inner field are + + + typedef enum fe_code_rate { + FEC_NONE = 0, + FEC_1_2, + FEC_2_3, + FEC_3_4, + FEC_4_5, + FEC_5_6, + FEC_6_7, + FEC_7_8, + FEC_8_9, + FEC_AUTO + } fe_code_rate_t; + +which correspond to error correction rates of 1/2, 2/3, etc., no error correction or auto +detection. + +For cable and terrestrial frontends (QAM and OFDM) one also has to specify the quadrature +modulation mode which can be one of the following: + + + typedef enum fe_modulation { + QPSK, + QAM_16, + QAM_32, + QAM_64, + QAM_128, + QAM_256, + QAM_AUTO + } fe_modulation_t; + +Finally, there are several more parameters for OFDM: + + + typedef enum fe_transmit_mode { + TRANSMISSION_MODE_2K, + TRANSMISSION_MODE_8K, + TRANSMISSION_MODE_AUTO + } fe_transmit_mode_t; + + + typedef enum fe_bandwidth { + BANDWIDTH_8_MHZ, + BANDWIDTH_7_MHZ, + BANDWIDTH_6_MHZ, + BANDWIDTH_AUTO + } fe_bandwidth_t; + + + typedef enum fe_guard_interval { + GUARD_INTERVAL_1_32, + GUARD_INTERVAL_1_16, + GUARD_INTERVAL_1_8, + GUARD_INTERVAL_1_4, + GUARD_INTERVAL_AUTO + } fe_guard_interval_t; + + + typedef enum fe_hierarchy { + HIERARCHY_NONE, + HIERARCHY_1, + HIERARCHY_2, + HIERARCHY_4, + HIERARCHY_AUTO + } fe_hierarchy_t; + + +
+ +
+frontend events + + struct dvb_frontend_event { + fe_status_t status; + struct dvb_frontend_parameters parameters; + }; + +
+
+ + +
+Frontend Function Calls + +
+open() +DESCRIPTION + + +This system call opens a named frontend device (/dev/dvb/adapter0/frontend0) + for subsequent use. Usually the first thing to do after a successful open is to + find out the frontend type with FE_GET_INFO. +The device can be opened in read-only mode, which only allows monitoring of + device status and statistics, or read/write mode, which allows any kind of use + (e.g. performing tuning operations.) + +In a system with multiple front-ends, it is usually the case that multiple devices + cannot be open in read/write mode simultaneously. As long as a front-end + device is opened in read/write mode, other open() calls in read/write mode will + either fail or block, depending on whether non-blocking or blocking mode was + specified. A front-end device opened in blocking mode can later be put into + non-blocking mode (and vice versa) using the F_SETFL command of the fcntl + system call. This is a standard system call, documented in the Linux manual + page for fcntl. When an open() call has succeeded, the device will be ready + for use in the specified mode. This implies that the corresponding hardware is + powered up, and that other front-ends may have been powered down to make + that possible. + + + +SYNOPSIS + +int open(const char ⋆deviceName, int flags); + + +PARAMETERS + + +const char + *deviceName + +Name of specific video device. + + +int flags + +A bit-wise OR of the following flags: + + + +O_RDONLY read-only access + + + +O_RDWR read/write access + + + +O_NONBLOCK open in non-blocking mode + + + +(blocking mode is the default) + + +ERRORS + + +ENODEV + +Device driver not loaded/available. + + +EINTERNAL + +Internal error. + + +EBUSY + +Device or resource busy. + + +EINVAL + +Invalid argument. + + +
+ +
+close() +DESCRIPTION + + +This system call closes a previously opened front-end device. After closing + a front-end device, its corresponding hardware might be powered down + automatically. + + +SYNOPSIS + + +int close(int fd); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +
+ +
+FE_READ_STATUS +DESCRIPTION + + +This ioctl call returns status information about the front-end. This call only + requires read-only access to the device. + + +SYNOPSIS + + +int ioctl(int fd, int request = FE_READ_STATUS, + fe_status_t ⋆status); + + +PARAMETERS + + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_READ_STATUS for this command. + + +struct fe_status_t + *status + +Points to the location where the front-end status word is + to be stored. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EFAULT + +status points to invalid address. + + +
+ +
+FE_READ_BER +DESCRIPTION + + +This ioctl call returns the bit error rate for the signal currently + received/demodulated by the front-end. For this command, read-only access to + the device is sufficient. + + +SYNOPSIS + + +int ioctl(int fd, int request = FE_READ_BER, + uint32_t ⋆ber); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_READ_BER for this command. + + +uint32_t *ber + +The bit error rate is stored into *ber. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EFAULT + +ber points to invalid address. + + +ENOSIGNAL + +There is no signal, thus no meaningful bit error rate. Also + returned if the front-end is not turned on. + + +ENOSYS + +Function not available for this device. + + +
+ +
+FE_READ_SNR + +DESCRIPTION + + +This ioctl call returns the signal-to-noise ratio for the signal currently received + by the front-end. For this command, read-only access to the device is sufficient. + + +SYNOPSIS + + +int ioctl(int fd, int request = FE_READ_SNR, int16_t + ⋆snr); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_READ_SNR for this command. + + +int16_t *snr + +The signal-to-noise ratio is stored into *snr. + + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EFAULT + +snr points to invalid address. + + +ENOSIGNAL + +There is no signal, thus no meaningful signal strength + value. Also returned if front-end is not turned on. + + +ENOSYS + +Function not available for this device. + + +
+ +
+FE_READ_SIGNAL_STRENGTH +DESCRIPTION + + +This ioctl call returns the signal strength value for the signal currently received + by the front-end. For this command, read-only access to the device is sufficient. + + +SYNOPSIS + + +int ioctl( int fd, int request = + FE_READ_SIGNAL_STRENGTH, int16_t ⋆strength); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_READ_SIGNAL_STRENGTH for this + command. + + +int16_t *strength + +The signal strength value is stored into *strength. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EFAULT + +status points to invalid address. + + +ENOSIGNAL + +There is no signal, thus no meaningful signal strength + value. Also returned if front-end is not turned on. + + +ENOSYS + +Function not available for this device. + + +
+ +
+FE_READ_UNCORRECTED_BLOCKS +DESCRIPTION + + +This ioctl call returns the number of uncorrected blocks detected by the device + driver during its lifetime. For meaningful measurements, the increment in block + count during a specific time interval should be calculated. For this command, + read-only access to the device is sufficient. + + +Note that the counter will wrap to zero after its maximum count has been + reached. + + +SYNOPSIS + + +int ioctl( int fd, int request = + FE_READ_UNCORRECTED_BLOCKS, uint32_t ⋆ublocks); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_READ_UNCORRECTED_BLOCKS for this + command. + + +uint32_t *ublocks + +The total number of uncorrected blocks seen by the driver + so far. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EFAULT + +ublocks points to invalid address. + + +ENOSYS + +Function not available for this device. + + +
+ +
+FE_SET_FRONTEND +DESCRIPTION + + +This ioctl call starts a tuning operation using specified parameters. The result + of this call will be successful if the parameters were valid and the tuning could + be initiated. The result of the tuning operation in itself, however, will arrive + asynchronously as an event (see documentation for FE_GET_EVENT and + FrontendEvent.) If a new FE_SET_FRONTEND operation is initiated before + the previous one was completed, the previous operation will be aborted in favor + of the new one. This command requires read/write access to the device. + + + +SYNOPSIS + + +int ioctl(int fd, int request = FE_SET_FRONTEND, + struct dvb_frontend_parameters ⋆p); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_SET_FRONTEND for this command. + + +struct + dvb_frontend_parameters + *p + +Points to parameters for tuning operation. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EFAULT + +p points to invalid address. + + +EINVAL + +Maximum supported symbol rate reached. + + +
+ +
+FE_GET_FRONTEND +DESCRIPTION + + +This ioctl call queries the currently effective frontend parameters. For this + command, read-only access to the device is sufficient. + + + +SYNOPSIS + + +int ioctl(int fd, int request = FE_GET_FRONTEND, + struct dvb_frontend_parameters ⋆p); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_SET_FRONTEND for this command. + + +struct + dvb_frontend_parameters + *p + +Points to parameters for tuning operation. + + + +ERRORS + + + +EBADF + +fd is not a valid open file descriptor. + + +EFAULT + +p points to invalid address. + + +EINVAL + +Maximum supported symbol rate reached. + + + +
+ +
+FE_GET_EVENT +DESCRIPTION + + +This ioctl call returns a frontend event if available. If an event is not + available, the behavior depends on whether the device is in blocking or + non-blocking mode. In the latter case, the call fails immediately with errno + set to EWOULDBLOCK. In the former case, the call blocks until an event + becomes available. + + +The standard Linux poll() and/or select() system calls can be used with the + device file descriptor to watch for new events. For select(), the file descriptor + should be included in the exceptfds argument, and for poll(), POLLPRI should + be specified as the wake-up condition. Since the event queue allocated is + rather small (room for 8 events), the queue must be serviced regularly to avoid + overflow. If an overflow happens, the oldest event is discarded from the queue, + and an error (EOVERFLOW) occurs the next time the queue is read. After + reporting the error condition in this fashion, subsequent FE_GET_EVENT + calls will return events from the queue as usual. + + +For the sake of implementation simplicity, this command requires read/write + access to the device. + + + +SYNOPSIS + + +int ioctl(int fd, int request = QPSK_GET_EVENT, + struct dvb_frontend_event ⋆ev); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_GET_EVENT for this command. + + +struct + dvb_frontend_event + *ev + +Points to the location where the event, + + + +if any, is to be stored. + + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EFAULT + +ev points to invalid address. + + +EWOULDBLOCK + +There is no event pending, and the device is in + non-blocking mode. + + +EOVERFLOW + + + + +Overflow in event queue - one or more events were lost. + + +
+ +
+FE_GET_INFO +DESCRIPTION + + +This ioctl call returns information about the front-end. This call only requires + read-only access to the device. + + +SYNOPSIS + + + + int ioctl(int fd, int request = FE_GET_INFO, struct + dvb_frontend_info ⋆info); + + +PARAMETERS + + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_GET_INFO for this command. + + +struct + dvb_frontend_info + *info + +Points to the location where the front-end information is + to be stored. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EFAULT + +info points to invalid address. + + +
+ +
+FE_DISEQC_RESET_OVERLOAD +DESCRIPTION + + +If the bus has been automatically powered off due to power overload, this ioctl + call restores the power to the bus. The call requires read/write access to the + device. This call has no effect if the device is manually powered off. Not all + DVB adapters support this ioctl. + + + +SYNOPSIS + + +int ioctl(int fd, int request = + FE_DISEQC_RESET_OVERLOAD); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_DISEQC_RESET_OVERLOAD for this + command. + + + +ERRORS + + +EBADF + +fd is not a valid file descriptor. + + +EPERM + +Permission denied (needs read/write access). + + +EINTERNAL + +Internal error in the device driver. + + +
+ +
+FE_DISEQC_SEND_MASTER_CMD +DESCRIPTION + + +This ioctl call is used to send a a DiSEqC command. + + +SYNOPSIS + + +int ioctl(int fd, int request = + FE_DISEQC_SEND_MASTER_CMD, struct + dvb_diseqc_master_cmd ⋆cmd); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_DISEQC_SEND_MASTER_CMD for this + command. + + +struct + dvb_diseqc_master_cmd + *cmd + +Pointer to the command to be transmitted. + + + +ERRORS + + +EBADF + +fd is not a valid file descriptor. + + +EFAULT + +Seq points to an invalid address. + + +EINVAL + +The data structure referred to by seq is invalid in some + way. + + +EPERM + +Permission denied (needs read/write access). + + +EINTERNAL + +Internal error in the device driver. + + +
+ +
+FE_DISEQC_RECV_SLAVE_REPLY +DESCRIPTION + + +This ioctl call is used to receive reply to a DiSEqC 2.0 command. + + + +SYNOPSIS + + +int ioctl(int fd, int request = + FE_DISEQC_RECV_SLAVE_REPLY, struct + dvb_diseqc_slave_reply ⋆reply); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_DISEQC_RECV_SLAVE_REPLY for this + command. + + +struct + dvb_diseqc_slave_reply + *reply + +Pointer to the command to be received. + + +ERRORS + + +EBADF + +fd is not a valid file descriptor. + + +EFAULT + +Seq points to an invalid address. + + +EINVAL + +The data structure referred to by seq is invalid in some + way. + + +EPERM + +Permission denied (needs read/write access). + + +EINTERNAL + +Internal error in the device driver. + + +
+ +
+FE_DISEQC_SEND_BURST +DESCRIPTION + + +This ioctl call is used to send a 22KHz tone burst. + + + +SYNOPSIS + + +int ioctl(int fd, int request = + FE_DISEQC_SEND_BURST, fe_sec_mini_cmd_t burst); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_DISEQC_SEND_BURST for this command. + + +fe_sec_mini_cmd_t + burst + +burst A or B. + + + +ERRORS + + +EBADF + +fd is not a valid file descriptor. + + +EFAULT + +Seq points to an invalid address. + + +EINVAL + +The data structure referred to by seq is invalid in some + way. + + +EPERM + +Permission denied (needs read/write access). + + +EINTERNAL + +Internal error in the device driver. + + +
+ +
+FE_SET_TONE +DESCRIPTION + + +This call is used to set the generation of the continuous 22kHz tone. This call + requires read/write permissions. + + +SYNOPSIS + + +int ioctl(int fd, int request = FE_SET_TONE, + fe_sec_tone_mode_t tone); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_SET_TONE for this command. + + +fe_sec_tone_mode_t + tone + +The requested tone generation mode (on/off). + + +ERRORS + + +ENODEV + +Device driver not loaded/available. + + +EBUSY + +Device or resource busy. + + +EINVAL + +Invalid argument. + + +EPERM + +File not opened with read permissions. + + +EINTERNAL + +Internal error in the device driver. + + +
+ +
+FE_SET_VOLTAGE +DESCRIPTION + + +This call is used to set the bus voltage. This call requires read/write + permissions. + + +SYNOPSIS + + +int ioctl(int fd, int request = FE_SET_VOLTAGE, + fe_sec_voltage_t voltage); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_SET_VOLTAGE for this command. + + +fe_sec_voltage_t + voltage + +The requested bus voltage. + + + +ERRORS + + +ENODEV + +Device driver not loaded/available. + + +EBUSY + +Device or resource busy. + + +EINVAL + +Invalid argument. + + +EPERM + +File not opened with read permissions. + + +EINTERNAL + +Internal error in the device driver. + + +
+ +
+FE_ENABLE_HIGH_LNB_VOLTAGE +DESCRIPTION + + +If high != 0 enables slightly higher voltages instead of 13/18V (to compensate + for long cables). This call requires read/write permissions. Not all DVB + adapters support this ioctl. + + + +SYNOPSIS + + +int ioctl(int fd, int request = + FE_ENABLE_HIGH_LNB_VOLTAGE, int high); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals FE_SET_VOLTAGE for this command. + + +int high + +The requested bus voltage. + + + +ERRORS + + +ENODEV + +Device driver not loaded/available. + + +EBUSY + +Device or resource busy. + + +EINVAL + +Invalid argument. + + +EPERM + +File not opened with read permissions. + + +EINTERNAL + +Internal error in the device driver. + + +
+
diff --git a/Documentation/DocBook/dvb/intro.xml b/Documentation/DocBook/dvb/intro.xml new file mode 100644 index 00000000000..83676c44e8a --- /dev/null +++ b/Documentation/DocBook/dvb/intro.xml @@ -0,0 +1,191 @@ +Introduction + +
+What you need to know + +The reader of this document is required to have some knowledge in +the area of digital video broadcasting (DVB) and should be familiar with +part I of the MPEG2 specification ISO/IEC 13818 (aka ITU-T H.222), i.e +you should know what a program/transport stream (PS/TS) is and what is +meant by a packetized elementary stream (PES) or an I-frame. + +Various DVB standards documents are available from +http://www.dvb.org/ and/or +http://www.etsi.org/. + +It is also necessary to know how to access unix/linux devices and +how to use ioctl calls. This also includes the knowledge of C or C++. + +
+ +
+History + +The first API for DVB cards we used at Convergence in late 1999 +was an extension of the Video4Linux API which was primarily developed +for frame grabber cards. As such it was not really well suited to be +used for DVB cards and their new features like recording MPEG streams +and filtering several section and PES data streams at the same time. + + +In early 2000, we were approached by Nokia with a proposal for a +new standard Linux DVB API. As a commitment to the development of +terminals based on open standards, Nokia and Convergence made it +available to all Linux developers and published it on http://www.linuxtv.org/ in September 2000. +Convergence is the maintainer of the Linux DVB API. Together with the +LinuxTV community (i.e. you, the reader of this document), the Linux DVB +API will be constantly reviewed and improved. With the Linux driver for +the Siemens/Hauppauge DVB PCI card Convergence provides a first +implementation of the Linux DVB API. +
+ +
+Overview + +
+Components of a DVB card/STB + + + + + + + + +
+ +A DVB PCI card or DVB set-top-box (STB) usually consists of the +following main hardware components: + + + + +Frontend consisting of tuner and DVB demodulator + +Here the raw signal reaches the DVB hardware from a satellite dish +or antenna or directly from cable. The frontend down-converts and +demodulates this signal into an MPEG transport stream (TS). In case of a +satellite frontend, this includes a facility for satellite equipment +control (SEC), which allows control of LNB polarization, multi feed +switches or dish rotors. + + + + +Conditional Access (CA) hardware like CI adapters and smartcard slots + + +The complete TS is passed through the CA hardware. Programs to +which the user has access (controlled by the smart card) are decoded in +real time and re-inserted into the TS. + + + + Demultiplexer which filters the incoming DVB stream + +The demultiplexer splits the TS into its components like audio and +video streams. Besides usually several of such audio and video streams +it also contains data streams with information about the programs +offered in this or other streams of the same provider. + + + + +MPEG2 audio and video decoder + +The main targets of the demultiplexer are the MPEG2 audio and +video decoders. After decoding they pass on the uncompressed audio and +video to the computer screen or (through a PAL/NTSC encoder) to a TV +set. + + + + + + shows a crude schematic of the control and data flow +between those components. + +On a DVB PCI card not all of these have to be present since some +functionality can be provided by the main CPU of the PC (e.g. MPEG +picture and sound decoding) or is not needed (e.g. for data-only uses +like “internet over satellite”). Also not every card or STB +provides conditional access hardware. + +
+ +
+Linux DVB Devices + +The Linux DVB API lets you control these hardware components +through currently six Unix-style character devices for video, audio, +frontend, demux, CA and IP-over-DVB networking. The video and audio +devices control the MPEG2 decoder hardware, the frontend device the +tuner and the DVB demodulator. The demux device gives you control over +the PES and section filters of the hardware. If the hardware does not +support filtering these filters can be implemented in software. Finally, +the CA device controls all the conditional access capabilities of the +hardware. It can depend on the individual security requirements of the +platform, if and how many of the CA functions are made available to the +application through this device. + +All devices can be found in the /dev +tree under /dev/dvb. The individual devices +are called: + + + + +/dev/dvb/adapterN/audioM, + + +/dev/dvb/adapterN/videoM, + + +/dev/dvb/adapterN/frontendM, + + + +/dev/dvb/adapterN/netM, + + + +/dev/dvb/adapterN/demuxM, + + + +/dev/dvb/adapterN/caM, + +where N enumerates the DVB PCI cards in a system starting +from 0, and M enumerates the devices of each type within each +adapter, starting from 0, too. We will omit the “/dev/dvb/adapterN/” in the further dicussion +of these devices. The naming scheme for the devices is the same wheter +devfs is used or not. + +More details about the data structures and function calls of all +the devices are described in the following chapters. + +
+ +
+API include files + +For each of the DVB devices a corresponding include file exists. +The DVB API include files should be included in application sources with +a partial path like: + + + + #include <linux/dvb/frontend.h> + + +To enable applications to support different API version, an +additional include file linux/dvb/version.h exists, which defines the +constant DVB_API_VERSION. This document +describes DVB_API_VERSION 3. + + +
+ diff --git a/Documentation/DocBook/dvb/kdapi.xml b/Documentation/DocBook/dvb/kdapi.xml new file mode 100644 index 00000000000..6c67481eaa4 --- /dev/null +++ b/Documentation/DocBook/dvb/kdapi.xml @@ -0,0 +1,2309 @@ +Kernel Demux API +The kernel demux API defines a driver-internal interface for registering low-level, +hardware specific driver to a hardware independent demux layer. It is only of interest for +DVB device driver writers. The header file for this API is named demux.h and located in +drivers/media/dvb/dvb-core. + +Maintainer note: This section must be reviewed. It is probably out of date. + + +
+Kernel Demux Data Types + + +
+dmx_success_t + + typedef enum { + DMX_OK = 0, /⋆ Received Ok ⋆/ + DMX_LENGTH_ERROR, /⋆ Incorrect length ⋆/ + DMX_OVERRUN_ERROR, /⋆ Receiver ring buffer overrun ⋆/ + DMX_CRC_ERROR, /⋆ Incorrect CRC ⋆/ + DMX_FRAME_ERROR, /⋆ Frame alignment error ⋆/ + DMX_FIFO_ERROR, /⋆ Receiver FIFO overrun ⋆/ + DMX_MISSED_ERROR /⋆ Receiver missed packet ⋆/ + } dmx_success_t; + + +
+
+TS filter types + + /⋆--------------------------------------------------------------------------⋆/ + /⋆ TS packet reception ⋆/ + /⋆--------------------------------------------------------------------------⋆/ + + /⋆ TS filter type for set_type() ⋆/ + + #define TS_PACKET 1 /⋆ send TS packets (188 bytes) to callback (default) ⋆/ + #define TS_PAYLOAD_ONLY 2 /⋆ in case TS_PACKET is set, only send the TS + payload (<=184 bytes per packet) to callback ⋆/ + #define TS_DECODER 4 /⋆ send stream to built-in decoder (if present) ⋆/ + + +
+
+dmx_ts_pes_t +The structure + + + typedef enum + { + DMX_TS_PES_AUDIO, /⋆ also send packets to audio decoder (if it exists) ⋆/ + DMX_TS_PES_VIDEO, /⋆ ... ⋆/ + DMX_TS_PES_TELETEXT, + DMX_TS_PES_SUBTITLE, + DMX_TS_PES_PCR, + DMX_TS_PES_OTHER, + } dmx_ts_pes_t; + +describes the PES type for filters which write to a built-in decoder. The correspond (and +should be kept identical) to the types in the demux device. + + + struct dmx_ts_feed_s { + int is_filtering; /⋆ Set to non-zero when filtering in progress ⋆/ + struct dmx_demux_s⋆ parent; /⋆ Back-pointer ⋆/ + void⋆ priv; /⋆ Pointer to private data of the API client ⋆/ + int (⋆set) (struct dmx_ts_feed_s⋆ feed, + __u16 pid, + size_t callback_length, + size_t circular_buffer_size, + int descramble, + struct timespec timeout); + int (⋆start_filtering) (struct dmx_ts_feed_s⋆ feed); + int (⋆stop_filtering) (struct dmx_ts_feed_s⋆ feed); + int (⋆set_type) (struct dmx_ts_feed_s⋆ feed, + int type, + dmx_ts_pes_t pes_type); + }; + + typedef struct dmx_ts_feed_s dmx_ts_feed_t; + + + /⋆--------------------------------------------------------------------------⋆/ + /⋆ PES packet reception (not supported yet) ⋆/ + /⋆--------------------------------------------------------------------------⋆/ + + typedef struct dmx_pes_filter_s { + struct dmx_pes_s⋆ parent; /⋆ Back-pointer ⋆/ + void⋆ priv; /⋆ Pointer to private data of the API client ⋆/ + } dmx_pes_filter_t; + + + typedef struct dmx_pes_feed_s { + int is_filtering; /⋆ Set to non-zero when filtering in progress ⋆/ + struct dmx_demux_s⋆ parent; /⋆ Back-pointer ⋆/ + void⋆ priv; /⋆ Pointer to private data of the API client ⋆/ + int (⋆set) (struct dmx_pes_feed_s⋆ feed, + __u16 pid, + size_t circular_buffer_size, + int descramble, + struct timespec timeout); + int (⋆start_filtering) (struct dmx_pes_feed_s⋆ feed); + int (⋆stop_filtering) (struct dmx_pes_feed_s⋆ feed); + int (⋆allocate_filter) (struct dmx_pes_feed_s⋆ feed, + dmx_pes_filter_t⋆⋆ filter); + int (⋆release_filter) (struct dmx_pes_feed_s⋆ feed, + dmx_pes_filter_t⋆ filter); + } dmx_pes_feed_t; + + + typedef struct { + __u8 filter_value [DMX_MAX_FILTER_SIZE]; + __u8 filter_mask [DMX_MAX_FILTER_SIZE]; + struct dmx_section_feed_s⋆ parent; /⋆ Back-pointer ⋆/ + void⋆ priv; /⋆ Pointer to private data of the API client ⋆/ + } dmx_section_filter_t; + + + struct dmx_section_feed_s { + int is_filtering; /⋆ Set to non-zero when filtering in progress ⋆/ + struct dmx_demux_s⋆ parent; /⋆ Back-pointer ⋆/ + void⋆ priv; /⋆ Pointer to private data of the API client ⋆/ + int (⋆set) (struct dmx_section_feed_s⋆ feed, + __u16 pid, + size_t circular_buffer_size, + int descramble, + int check_crc); + int (⋆allocate_filter) (struct dmx_section_feed_s⋆ feed, + dmx_section_filter_t⋆⋆ filter); + int (⋆release_filter) (struct dmx_section_feed_s⋆ feed, + dmx_section_filter_t⋆ filter); + int (⋆start_filtering) (struct dmx_section_feed_s⋆ feed); + int (⋆stop_filtering) (struct dmx_section_feed_s⋆ feed); + }; + typedef struct dmx_section_feed_s dmx_section_feed_t; + + /⋆--------------------------------------------------------------------------⋆/ + /⋆ Callback functions ⋆/ + /⋆--------------------------------------------------------------------------⋆/ + + typedef int (⋆dmx_ts_cb) ( __u8 ⋆ buffer1, + size_t buffer1_length, + __u8 ⋆ buffer2, + size_t buffer2_length, + dmx_ts_feed_t⋆ source, + dmx_success_t success); + + typedef int (⋆dmx_section_cb) ( __u8 ⋆ buffer1, + size_t buffer1_len, + __u8 ⋆ buffer2, + size_t buffer2_len, + dmx_section_filter_t ⋆ source, + dmx_success_t success); + + typedef int (⋆dmx_pes_cb) ( __u8 ⋆ buffer1, + size_t buffer1_len, + __u8 ⋆ buffer2, + size_t buffer2_len, + dmx_pes_filter_t⋆ source, + dmx_success_t success); + + /⋆--------------------------------------------------------------------------⋆/ + /⋆ DVB Front-End ⋆/ + /⋆--------------------------------------------------------------------------⋆/ + + typedef enum { + DMX_OTHER_FE = 0, + DMX_SATELLITE_FE, + DMX_CABLE_FE, + DMX_TERRESTRIAL_FE, + DMX_LVDS_FE, + DMX_ASI_FE, /⋆ DVB-ASI interface ⋆/ + DMX_MEMORY_FE + } dmx_frontend_source_t; + + typedef struct { + /⋆ The following char⋆ fields point to NULL terminated strings ⋆/ + char⋆ id; /⋆ Unique front-end identifier ⋆/ + char⋆ vendor; /⋆ Name of the front-end vendor ⋆/ + char⋆ model; /⋆ Name of the front-end model ⋆/ + struct list_head connectivity_list; /⋆ List of front-ends that can + be connected to a particular + demux ⋆/ + void⋆ priv; /⋆ Pointer to private data of the API client ⋆/ + dmx_frontend_source_t source; + } dmx_frontend_t; + + /⋆--------------------------------------------------------------------------⋆/ + /⋆ MPEG-2 TS Demux ⋆/ + /⋆--------------------------------------------------------------------------⋆/ + + /⋆ + ⋆ Flags OR'ed in the capabilites field of struct dmx_demux_s. + ⋆/ + + #define DMX_TS_FILTERING 1 + #define DMX_PES_FILTERING 2 + #define DMX_SECTION_FILTERING 4 + #define DMX_MEMORY_BASED_FILTERING 8 /⋆ write() available ⋆/ + #define DMX_CRC_CHECKING 16 + #define DMX_TS_DESCRAMBLING 32 + #define DMX_SECTION_PAYLOAD_DESCRAMBLING 64 + #define DMX_MAC_ADDRESS_DESCRAMBLING 128 + + +
+
+demux_demux_t + + /⋆ + ⋆ DMX_FE_ENTRY(): Casts elements in the list of registered + ⋆ front-ends from the generic type struct list_head + ⋆ to the type ⋆ dmx_frontend_t + ⋆. + ⋆/ + + #define DMX_FE_ENTRY(list) list_entry(list, dmx_frontend_t, connectivity_list) + + struct dmx_demux_s { + /⋆ The following char⋆ fields point to NULL terminated strings ⋆/ + char⋆ id; /⋆ Unique demux identifier ⋆/ + char⋆ vendor; /⋆ Name of the demux vendor ⋆/ + char⋆ model; /⋆ Name of the demux model ⋆/ + __u32 capabilities; /⋆ Bitfield of capability flags ⋆/ + dmx_frontend_t⋆ frontend; /⋆ Front-end connected to the demux ⋆/ + struct list_head reg_list; /⋆ List of registered demuxes ⋆/ + void⋆ priv; /⋆ Pointer to private data of the API client ⋆/ + int users; /⋆ Number of users ⋆/ + int (⋆open) (struct dmx_demux_s⋆ demux); + int (⋆close) (struct dmx_demux_s⋆ demux); + int (⋆write) (struct dmx_demux_s⋆ demux, const char⋆ buf, size_t count); + int (⋆allocate_ts_feed) (struct dmx_demux_s⋆ demux, + dmx_ts_feed_t⋆⋆ feed, + dmx_ts_cb callback); + int (⋆release_ts_feed) (struct dmx_demux_s⋆ demux, + dmx_ts_feed_t⋆ feed); + int (⋆allocate_pes_feed) (struct dmx_demux_s⋆ demux, + dmx_pes_feed_t⋆⋆ feed, + dmx_pes_cb callback); + int (⋆release_pes_feed) (struct dmx_demux_s⋆ demux, + dmx_pes_feed_t⋆ feed); + int (⋆allocate_section_feed) (struct dmx_demux_s⋆ demux, + dmx_section_feed_t⋆⋆ feed, + dmx_section_cb callback); + int (⋆release_section_feed) (struct dmx_demux_s⋆ demux, + dmx_section_feed_t⋆ feed); + int (⋆descramble_mac_address) (struct dmx_demux_s⋆ demux, + __u8⋆ buffer1, + size_t buffer1_length, + __u8⋆ buffer2, + size_t buffer2_length, + __u16 pid); + int (⋆descramble_section_payload) (struct dmx_demux_s⋆ demux, + __u8⋆ buffer1, + size_t buffer1_length, + __u8⋆ buffer2, size_t buffer2_length, + __u16 pid); + int (⋆add_frontend) (struct dmx_demux_s⋆ demux, + dmx_frontend_t⋆ frontend); + int (⋆remove_frontend) (struct dmx_demux_s⋆ demux, + dmx_frontend_t⋆ frontend); + struct list_head⋆ (⋆get_frontends) (struct dmx_demux_s⋆ demux); + int (⋆connect_frontend) (struct dmx_demux_s⋆ demux, + dmx_frontend_t⋆ frontend); + int (⋆disconnect_frontend) (struct dmx_demux_s⋆ demux); + + + /⋆ added because js cannot keep track of these himself ⋆/ + int (⋆get_pes_pids) (struct dmx_demux_s⋆ demux, __u16 ⋆pids); + }; + typedef struct dmx_demux_s dmx_demux_t; + + +
+
+Demux directory + + /⋆ + ⋆ DMX_DIR_ENTRY(): Casts elements in the list of registered + ⋆ demuxes from the generic type struct list_head⋆ to the type dmx_demux_t + ⋆. + ⋆/ + + #define DMX_DIR_ENTRY(list) list_entry(list, dmx_demux_t, reg_list) + + int dmx_register_demux (dmx_demux_t⋆ demux); + int dmx_unregister_demux (dmx_demux_t⋆ demux); + struct list_head⋆ dmx_get_demuxes (void); + +
+
+Demux Directory API +The demux directory is a Linux kernel-wide facility for registering and accessing the +MPEG-2 TS demuxes in the system. Run-time registering and unregistering of demux drivers +is possible using this API. + +All demux drivers in the directory implement the abstract interface dmx_demux_t. + + +
dmx_register_demux() +DESCRIPTION + + +This function makes a demux driver interface available to the Linux kernel. It is + usually called by the init_module() function of the kernel module that contains + the demux driver. The caller of this function is responsible for allocating + dynamic or static memory for the demux structure and for initializing its fields + before calling this function. The memory allocated for the demux structure + must not be freed before calling dmx_unregister_demux(), + + +SYNOPSIS + + +int dmx_register_demux ( dmx_demux_t ⋆demux ) + + +PARAMETERS + + +dmx_demux_t* + demux + +Pointer to the demux structure. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EEXIST + +A demux with the same value of the id field already stored + in the directory. + + +-ENOSPC + +No space left in the directory. + + + +
dmx_unregister_demux() +DESCRIPTION + + +This function is called to indicate that the given demux interface is no + longer available. The caller of this function is responsible for freeing the + memory of the demux structure, if it was dynamically allocated before calling + dmx_register_demux(). The cleanup_module() function of the kernel module + that contains the demux driver should call this function. Note that this function + fails if the demux is currently in use, i.e., release_demux() has not been called + for the interface. + + +SYNOPSIS + + +int dmx_unregister_demux ( dmx_demux_t ⋆demux ) + + +PARAMETERS + + +dmx_demux_t* + demux + +Pointer to the demux structure which is to be + unregistered. + + +RETURNS + + +0 + +The function was completed without errors. + + +ENODEV + +The specified demux is not registered in the demux + directory. + + +EBUSY + +The specified demux is currently in use. + + + +
dmx_get_demuxes() +DESCRIPTION + + +Provides the caller with the list of registered demux interfaces, using the + standard list structure defined in the include file linux/list.h. The include file + demux.h defines the macro DMX_DIR_ENTRY() for converting an element of + the generic type struct list_head* to the type dmx_demux_t*. The caller must + not free the memory of any of the elements obtained via this function call. + + +SYNOPSIS + + +struct list_head ⋆dmx_get_demuxes () + + +PARAMETERS + + +none + + +RETURNS + + +struct list_head * + +A list of demux interfaces, or NULL in the case of an + empty list. + + +
+
+Demux API +The demux API should be implemented for each demux in the system. It is used to select +the TS source of a demux and to manage the demux resources. When the demux +client allocates a resource via the demux API, it receives a pointer to the API of that +resource. + +Each demux receives its TS input from a DVB front-end or from memory, as set via the +demux API. In a system with more than one front-end, the API can be used to select one of +the DVB front-ends as a TS source for a demux, unless this is fixed in the HW platform. The +demux API only controls front-ends regarding their connections with demuxes; the APIs +used to set the other front-end parameters, such as tuning, are not defined in this +document. + +The functions that implement the abstract interface demux should be defined static or +module private and registered to the Demux Directory for external access. It is not necessary +to implement every function in the demux_t struct, however (for example, a demux interface +might support Section filtering, but not TS or PES filtering). The API client is expected to +check the value of any function pointer before calling the function: the value of NULL means +“function not available”. + +Whenever the functions of the demux API modify shared data, the possibilities of lost +update and race condition problems should be addressed, e.g. by protecting parts of code with +mutexes. This is especially important on multi-processor hosts. + +Note that functions called from a bottom half context must not sleep, at least in the 2.2.x +kernels. Even a simple memory allocation can result in a kernel thread being put to sleep if +swapping is needed. For example, the Linux kernel calls the functions of a network device +interface from a bottom half context. Thus, if a demux API function is called from network +device code, the function must not sleep. + + + +
+open() +DESCRIPTION + + +This function reserves the demux for use by the caller and, if necessary, + initializes the demux. When the demux is no longer needed, the function close() + should be called. It should be possible for multiple clients to access the demux + at the same time. Thus, the function implementation should increment the + demux usage count when open() is called and decrement it when close() is + called. + + +SYNOPSIS + + +int open ( demux_t⋆ demux ); + + +PARAMETERS + + +demux_t* demux + +Pointer to the demux API and instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EUSERS + +Maximum usage count reached. + + +-EINVAL + +Bad parameter. + + + +
+
+close() +DESCRIPTION + + +This function reserves the demux for use by the caller and, if necessary, + initializes the demux. When the demux is no longer needed, the function close() + should be called. It should be possible for multiple clients to access the demux + at the same time. Thus, the function implementation should increment the + demux usage count when open() is called and decrement it when close() is + called. + + +SYNOPSIS + + +int close(demux_t⋆ demux); + + +PARAMETERS + + +demux_t* demux + +Pointer to the demux API and instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-ENODEV + +The demux was not in use. + + +-EINVAL + +Bad parameter. + + + +
+
+write() +DESCRIPTION + + +This function provides the demux driver with a memory buffer containing TS + packets. Instead of receiving TS packets from the DVB front-end, the demux + driver software will read packets from memory. Any clients of this demux + with active TS, PES or Section filters will receive filtered data via the Demux + callback API (see 0). The function returns when all the data in the buffer has + been consumed by the demux. Demux hardware typically cannot read TS from + memory. If this is the case, memory-based filtering has to be implemented + entirely in software. + + +SYNOPSIS + + +int write(demux_t⋆ demux, const char⋆ buf, size_t + count); + + +PARAMETERS + + +demux_t* demux + +Pointer to the demux API and instance data. + + +const char* buf + +Pointer to the TS data in kernel-space memory. + + +size_t length + +Length of the TS data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-ENOSYS + +The command is not implemented. + + +-EINVAL + +Bad parameter. + + + +
allocate_ts_feed() +DESCRIPTION + + +Allocates a new TS feed, which is used to filter the TS packets carrying a + certain PID. The TS feed normally corresponds to a hardware PID filter on the + demux chip. + + +SYNOPSIS + + +int allocate_ts_feed(dmx_demux_t⋆ demux, + dmx_ts_feed_t⋆⋆ feed, dmx_ts_cb callback); + + +PARAMETERS + + +demux_t* demux + +Pointer to the demux API and instance data. + + +dmx_ts_feed_t** + feed + +Pointer to the TS feed API and instance data. + + +dmx_ts_cb callback + +Pointer to the callback function for passing received TS + packet + + +RETURNS + + +0 + +The function was completed without errors. + + +-EBUSY + +No more TS feeds available. + + +-ENOSYS + +The command is not implemented. + + +-EINVAL + +Bad parameter. + + + +
release_ts_feed() +DESCRIPTION + + +Releases the resources allocated with allocate_ts_feed(). Any filtering in + progress on the TS feed should be stopped before calling this function. + + +SYNOPSIS + + +int release_ts_feed(dmx_demux_t⋆ demux, + dmx_ts_feed_t⋆ feed); + + +PARAMETERS + + +demux_t* demux + +Pointer to the demux API and instance data. + + +dmx_ts_feed_t* feed + +Pointer to the TS feed API and instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EINVAL + +Bad parameter. + + + +
allocate_section_feed() +DESCRIPTION + + +Allocates a new section feed, i.e. a demux resource for filtering and receiving + sections. On platforms with hardware support for section filtering, a section + feed is directly mapped to the demux HW. On other platforms, TS packets are + first PID filtered in hardware and a hardware section filter then emulated in + software. The caller obtains an API pointer of type dmx_section_feed_t as an + out parameter. Using this API the caller can set filtering parameters and start + receiving sections. + + +SYNOPSIS + + +int allocate_section_feed(dmx_demux_t⋆ demux, + dmx_section_feed_t ⋆⋆feed, dmx_section_cb callback); + + +PARAMETERS + + +demux_t *demux + +Pointer to the demux API and instance data. + + +dmx_section_feed_t + **feed + +Pointer to the section feed API and instance data. + + +dmx_section_cb + callback + +Pointer to the callback function for passing received + sections. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EBUSY + +No more section feeds available. + + +-ENOSYS + +The command is not implemented. + + +-EINVAL + +Bad parameter. + + + +
release_section_feed() +DESCRIPTION + + +Releases the resources allocated with allocate_section_feed(), including + allocated filters. Any filtering in progress on the section feed should be stopped + before calling this function. + + +SYNOPSIS + + +int release_section_feed(dmx_demux_t⋆ demux, + dmx_section_feed_t ⋆feed); + + +PARAMETERS + + +demux_t *demux + +Pointer to the demux API and instance data. + + +dmx_section_feed_t + *feed + +Pointer to the section feed API and instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EINVAL + +Bad parameter. + + + +
descramble_mac_address() +DESCRIPTION + + +This function runs a descrambling algorithm on the destination MAC + address field of a DVB Datagram Section, replacing the original address + with its un-encrypted version. Otherwise, the description on the function + descramble_section_payload() applies also to this function. + + +SYNOPSIS + + +int descramble_mac_address(dmx_demux_t⋆ demux, __u8 + ⋆buffer1, size_t buffer1_length, __u8 ⋆buffer2, + size_t buffer2_length, __u16 pid); + + +PARAMETERS + + +dmx_demux_t + *demux + +Pointer to the demux API and instance data. + + +__u8 *buffer1 + +Pointer to the first byte of the section. + + +size_t buffer1_length + +Length of the section data, including headers and CRC, + in buffer1. + + +__u8* buffer2 + +Pointer to the tail of the section data, or NULL. The + pointer has a non-NULL value if the section wraps past + the end of a circular buffer. + + +size_t buffer2_length + +Length of the section data, including headers and CRC, + in buffer2. + + +__u16 pid + +The PID on which the section was received. Useful + for obtaining the descrambling key, e.g. from a DVB + Common Access facility. + + +RETURNS + + +0 + +The function was completed without errors. + + +-ENOSYS + +No descrambling facility available. + + +-EINVAL + +Bad parameter. + + + +
descramble_section_payload() +DESCRIPTION + + +This function runs a descrambling algorithm on the payload of a DVB + Datagram Section, replacing the original payload with its un-encrypted + version. The function will be called from the demux API implementation; + the API client need not call this function directly. Section-level scrambling + algorithms are currently standardized only for DVB-RCC (return channel + over 2-directional cable TV network) systems. For all other DVB networks, + encryption schemes are likely to be proprietary to each data broadcaster. Thus, + it is expected that this function pointer will have the value of NULL (i.e., + function not available) in most demux API implementations. Nevertheless, it + should be possible to use the function pointer as a hook for dynamically adding + a “plug-in” descrambling facility to a demux driver. + + +While this function is not needed with hardware-based section descrambling, + the descramble_section_payload function pointer can be used to override the + default hardware-based descrambling algorithm: if the function pointer has a + non-NULL value, the corresponding function should be used instead of any + descrambling hardware. + + +SYNOPSIS + + +int descramble_section_payload(dmx_demux_t⋆ demux, + __u8 ⋆buffer1, size_t buffer1_length, __u8 ⋆buffer2, + size_t buffer2_length, __u16 pid); + + +PARAMETERS + + +dmx_demux_t + *demux + +Pointer to the demux API and instance data. + + +__u8 *buffer1 + +Pointer to the first byte of the section. + + +size_t buffer1_length + +Length of the section data, including headers and CRC, + in buffer1. + + +__u8 *buffer2 + +Pointer to the tail of the section data, or NULL. The + pointer has a non-NULL value if the section wraps past + the end of a circular buffer. + + +size_t buffer2_length + +Length of the section data, including headers and CRC, + in buffer2. + + +__u16 pid + +The PID on which the section was received. Useful + for obtaining the descrambling key, e.g. from a DVB + Common Access facility. + + +RETURNS + + +0 + +The function was completed without errors. + + +-ENOSYS + +No descrambling facility available. + + +-EINVAL + +Bad parameter. + + + +
add_frontend() +DESCRIPTION + + +Registers a connectivity between a demux and a front-end, i.e., indicates that + the demux can be connected via a call to connect_frontend() to use the given + front-end as a TS source. The client of this function has to allocate dynamic or + static memory for the frontend structure and initialize its fields before calling + this function. This function is normally called during the driver initialization. + The caller must not free the memory of the frontend struct before successfully + calling remove_frontend(). + + +SYNOPSIS + + +int add_frontend(dmx_demux_t ⋆demux, dmx_frontend_t + ⋆frontend); + + +PARAMETERS + + +dmx_demux_t* + demux + +Pointer to the demux API and instance data. + + +dmx_frontend_t* + frontend + +Pointer to the front-end instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EEXIST + +A front-end with the same value of the id field already + registered. + + +-EINUSE + +The demux is in use. + + +-ENOMEM + +No more front-ends can be added. + + +-EINVAL + +Bad parameter. + + + +
remove_frontend() +DESCRIPTION + + +Indicates that the given front-end, registered by a call to add_frontend(), can + no longer be connected as a TS source by this demux. The function should be + called when a front-end driver or a demux driver is removed from the system. + If the front-end is in use, the function fails with the return value of -EBUSY. + After successfully calling this function, the caller can free the memory of + the frontend struct if it was dynamically allocated before the add_frontend() + operation. + + +SYNOPSIS + + +int remove_frontend(dmx_demux_t⋆ demux, + dmx_frontend_t⋆ frontend); + + +PARAMETERS + + +dmx_demux_t* + demux + +Pointer to the demux API and instance data. + + +dmx_frontend_t* + frontend + +Pointer to the front-end instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EINVAL + +Bad parameter. + + +-EBUSY + +The front-end is in use, i.e. a call to connect_frontend() + has not been followed by a call to disconnect_frontend(). + + + +
get_frontends() +DESCRIPTION + + +Provides the APIs of the front-ends that have been registered for this demux. + Any of the front-ends obtained with this call can be used as a parameter for + connect_frontend(). + + +The include file demux.h contains the macro DMX_FE_ENTRY() for + converting an element of the generic type struct list_head* to the type + dmx_frontend_t*. The caller must not free the memory of any of the elements + obtained via this function call. + + +SYNOPSIS + + +struct list_head⋆ get_frontends(dmx_demux_t⋆ demux); + + +PARAMETERS + + +dmx_demux_t* + demux + +Pointer to the demux API and instance data. + + +RETURNS + + +dmx_demux_t* + +A list of front-end interfaces, or NULL in the case of an + empty list. + + + +
connect_frontend() +DESCRIPTION + + +Connects the TS output of the front-end to the input of the demux. A demux + can only be connected to a front-end registered to the demux with the function + add_frontend(). + + +It may or may not be possible to connect multiple demuxes to the same + front-end, depending on the capabilities of the HW platform. When not used, + the front-end should be released by calling disconnect_frontend(). + + +SYNOPSIS + + +int connect_frontend(dmx_demux_t⋆ demux, + dmx_frontend_t⋆ frontend); + + +PARAMETERS + + +dmx_demux_t* + demux + +Pointer to the demux API and instance data. + + +dmx_frontend_t* + frontend + +Pointer to the front-end instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EINVAL + +Bad parameter. + + +-EBUSY + +The front-end is in use. + + + +
disconnect_frontend() +DESCRIPTION + + +Disconnects the demux and a front-end previously connected by a + connect_frontend() call. + + +SYNOPSIS + + +int disconnect_frontend(dmx_demux_t⋆ demux); + + +PARAMETERS + + +dmx_demux_t* + demux + +Pointer to the demux API and instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EINVAL + +Bad parameter. + + +
+
+Demux Callback API +This kernel-space API comprises the callback functions that deliver filtered data to the +demux client. Unlike the other APIs, these API functions are provided by the client and called +from the demux code. + +The function pointers of this abstract interface are not packed into a structure as in the +other demux APIs, because the callback functions are registered and used independent +of each other. As an example, it is possible for the API client to provide several +callback functions for receiving TS packets and no callbacks for PES packets or +sections. + +The functions that implement the callback API need not be re-entrant: when a demux +driver calls one of these functions, the driver is not allowed to call the function again before +the original call returns. If a callback is triggered by a hardware interrupt, it is recommended +to use the Linux “bottom half” mechanism or start a tasklet instead of making the callback +function call directly from a hardware interrupt. + + +
dmx_ts_cb() +DESCRIPTION + + +This function, provided by the client of the demux API, is called from the + demux code. The function is only called when filtering on this TS feed has + been enabled using the start_filtering() function. + + +Any TS packets that match the filter settings are copied to a circular buffer. The + filtered TS packets are delivered to the client using this callback function. The + size of the circular buffer is controlled by the circular_buffer_size parameter + of the set() function in the TS Feed API. It is expected that the buffer1 and + buffer2 callback parameters point to addresses within the circular buffer, but + other implementations are also possible. Note that the called party should not + try to free the memory the buffer1 and buffer2 parameters point to. + + +When this function is called, the buffer1 parameter typically points to the + start of the first undelivered TS packet within a circular buffer. The buffer2 + buffer parameter is normally NULL, except when the received TS packets have + crossed the last address of the circular buffer and ”wrapped” to the beginning + of the buffer. In the latter case the buffer1 parameter would contain an address + within the circular buffer, while the buffer2 parameter would contain the first + address of the circular buffer. + + +The number of bytes delivered with this function (i.e. buffer1_length + + buffer2_length) is usually equal to the value of callback_length parameter + given in the set() function, with one exception: if a timeout occurs before + receiving callback_length bytes of TS data, any undelivered packets are + immediately delivered to the client by calling this function. The timeout + duration is controlled by the set() function in the TS Feed API. + + +If a TS packet is received with errors that could not be fixed by the TS-level + forward error correction (FEC), the Transport_error_indicator flag of the TS + packet header should be set. The TS packet should not be discarded, as + the error can possibly be corrected by a higher layer protocol. If the called + party is slow in processing the callback, it is possible that the circular buffer + eventually fills up. If this happens, the demux driver should discard any TS + packets received while the buffer is full. The error should be indicated to the + client on the next callback by setting the success parameter to the value of + DMX_OVERRUN_ERROR. + + +The type of data returned to the callback can be selected by the new + function int (*set_type) (struct dmx_ts_feed_s* feed, int type, dmx_ts_pes_t + pes_type) which is part of the dmx_ts_feed_s struct (also cf. to the + include file ost/demux.h) The type parameter decides if the raw TS packet + (TS_PACKET) or just the payload (TS_PACKET—TS_PAYLOAD_ONLY) + should be returned. If additionally the TS_DECODER bit is set the stream + will also be sent to the hardware MPEG decoder. In this case, the second + flag decides as what kind of data the stream should be interpreted. The + possible choices are one of DMX_TS_PES_AUDIO, DMX_TS_PES_VIDEO, + DMX_TS_PES_TELETEXT, DMX_TS_PES_SUBTITLE, + DMX_TS_PES_PCR, or DMX_TS_PES_OTHER. + + +SYNOPSIS + + +int dmx_ts_cb(__u8⋆ buffer1, size_t buffer1_length, + __u8⋆ buffer2, size_t buffer2_length, dmx_ts_feed_t⋆ + source, dmx_success_t success); + + +PARAMETERS + + +__u8* buffer1 + +Pointer to the start of the filtered TS packets. + + +size_t buffer1_length + +Length of the TS data in buffer1. + + +__u8* buffer2 + +Pointer to the tail of the filtered TS packets, or NULL. + + +size_t buffer2_length + +Length of the TS data in buffer2. + + +dmx_ts_feed_t* + source + +Indicates which TS feed is the source of the callback. + + +dmx_success_t + success + +Indicates if there was an error in TS reception. + + +RETURNS + + +0 + +Continue filtering. + + +-1 + +Stop filtering - has the same effect as a call to + stop_filtering() on the TS Feed API. + + + +
dmx_section_cb() +DESCRIPTION + + +This function, provided by the client of the demux API, is called from the + demux code. The function is only called when filtering of sections has been + enabled using the function start_filtering() of the section feed API. When the + demux driver has received a complete section that matches at least one section + filter, the client is notified via this callback function. Normally this function is + called for each received section; however, it is also possible to deliver multiple + sections with one callback, for example when the system load is high. If an + error occurs while receiving a section, this function should be called with + the corresponding error type set in the success field, whether or not there is + data to deliver. The Section Feed implementation should maintain a circular + buffer for received sections. However, this is not necessary if the Section Feed + API is implemented as a client of the TS Feed API, because the TS Feed + implementation then buffers the received data. The size of the circular buffer + can be configured using the set() function in the Section Feed API. If there + is no room in the circular buffer when a new section is received, the section + must be discarded. If this happens, the value of the success parameter should + be DMX_OVERRUN_ERROR on the next callback. + + +SYNOPSIS + + +int dmx_section_cb(__u8⋆ buffer1, size_t + buffer1_length, __u8⋆ buffer2, size_t + buffer2_length, dmx_section_filter_t⋆ source, + dmx_success_t success); + + +PARAMETERS + + +__u8* buffer1 + +Pointer to the start of the filtered section, e.g. within the + circular buffer of the demux driver. + + +size_t buffer1_length + +Length of the filtered section data in buffer1, including + headers and CRC. + + +__u8* buffer2 + +Pointer to the tail of the filtered section data, or NULL. + Useful to handle the wrapping of a circular buffer. + + +size_t buffer2_length + +Length of the filtered section data in buffer2, including + headers and CRC. + + +dmx_section_filter_t* + filter + +Indicates the filter that triggered the callback. + + +dmx_success_t + success + +Indicates if there was an error in section reception. + + +RETURNS + + +0 + +Continue filtering. + + +-1 + +Stop filtering - has the same effect as a call to + stop_filtering() on the Section Feed API. + + +
+
+TS Feed API +A TS feed is typically mapped to a hardware PID filter on the demux chip. +Using this API, the client can set the filtering properties to start/stop filtering TS +packets on a particular TS feed. The API is defined as an abstract interface of the type +dmx_ts_feed_t. + +The functions that implement the interface should be defined static or module private. The +client can get the handle of a TS feed API by calling the function allocate_ts_feed() in the +demux API. + + +
set() +DESCRIPTION + + +This function sets the parameters of a TS feed. Any filtering in progress on the + TS feed must be stopped before calling this function. + + +SYNOPSIS + + +int set ( dmx_ts_feed_t⋆ feed, __u16 pid, size_t + callback_length, size_t circular_buffer_size, int + descramble, struct timespec timeout); + + +PARAMETERS + + +dmx_ts_feed_t* feed + +Pointer to the TS feed API and instance data. + + +__u16 pid + +PID value to filter. Only the TS packets carrying the + specified PID will be passed to the API client. + + +size_t + callback_length + +Number of bytes to deliver with each call to the + dmx_ts_cb() callback function. The value of this + parameter should be a multiple of 188. + + +size_t + circular_buffer_size + +Size of the circular buffer for the filtered TS packets. + + +int descramble + +If non-zero, descramble the filtered TS packets. + + +struct timespec + timeout + +Maximum time to wait before delivering received TS + packets to the client. + + +RETURNS + + +0 + +The function was completed without errors. + + +-ENOMEM + +Not enough memory for the requested buffer size. + + +-ENOSYS + +No descrambling facility available for TS. + + +-EINVAL + +Bad parameter. + + + +
start_filtering() +DESCRIPTION + + +Starts filtering TS packets on this TS feed, according to its settings. The PID + value to filter can be set by the API client. All matching TS packets are + delivered asynchronously to the client, using the callback function registered + with allocate_ts_feed(). + + +SYNOPSIS + + +int start_filtering(dmx_ts_feed_t⋆ feed); + + +PARAMETERS + + +dmx_ts_feed_t* feed + +Pointer to the TS feed API and instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EINVAL + +Bad parameter. + + + +
stop_filtering() +DESCRIPTION + + +Stops filtering TS packets on this TS feed. + + +SYNOPSIS + + +int stop_filtering(dmx_ts_feed_t⋆ feed); + + +PARAMETERS + + +dmx_ts_feed_t* feed + +Pointer to the TS feed API and instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EINVAL + +Bad parameter. + + +
+
+Section Feed API +A section feed is a resource consisting of a PID filter and a set of section filters. Using this +API, the client can set the properties of a section feed and to start/stop filtering. The API is +defined as an abstract interface of the type dmx_section_feed_t. The functions that implement +the interface should be defined static or module private. The client can get the handle of +a section feed API by calling the function allocate_section_feed() in the demux +API. + +On demux platforms that provide section filtering in hardware, the Section Feed API +implementation provides a software wrapper for the demux hardware. Other platforms may +support only PID filtering in hardware, requiring that TS packets are converted to sections in +software. In the latter case the Section Feed API implementation can be a client of the TS +Feed API. + + +
+
+set() +DESCRIPTION + + +This function sets the parameters of a section feed. Any filtering in progress on + the section feed must be stopped before calling this function. If descrambling + is enabled, the payload_scrambling_control and address_scrambling_control + fields of received DVB datagram sections should be observed. If either one is + non-zero, the section should be descrambled either in hardware or using the + functions descramble_mac_address() and descramble_section_payload() of the + demux API. Note that according to the MPEG-2 Systems specification, only + the payloads of private sections can be scrambled while the rest of the section + data must be sent in the clear. + + +SYNOPSIS + + +int set(dmx_section_feed_t⋆ feed, __u16 pid, size_t + circular_buffer_size, int descramble, int + check_crc); + + +PARAMETERS + + +dmx_section_feed_t* + feed + +Pointer to the section feed API and instance data. + + +__u16 pid + +PID value to filter; only the TS packets carrying the + specified PID will be accepted. + + +size_t + circular_buffer_size + +Size of the circular buffer for filtered sections. + + +int descramble + +If non-zero, descramble any sections that are scrambled. + + +int check_crc + +If non-zero, check the CRC values of filtered sections. + + +RETURNS + + +0 + +The function was completed without errors. + + +-ENOMEM + +Not enough memory for the requested buffer size. + + +-ENOSYS + +No descrambling facility available for sections. + + +-EINVAL + +Bad parameters. + + + +
allocate_filter() +DESCRIPTION + + +This function is used to allocate a section filter on the demux. It should only be + called when no filtering is in progress on this section feed. If a filter cannot be + allocated, the function fails with -ENOSPC. See in section ?? for the format of + the section filter. + + +The bitfields filter_mask and filter_value should only be modified when no + filtering is in progress on this section feed. filter_mask controls which bits of + filter_value are compared with the section headers/payload. On a binary value + of 1 in filter_mask, the corresponding bits are compared. The filter only accepts + sections that are equal to filter_value in all the tested bit positions. Any changes + to the values of filter_mask and filter_value are guaranteed to take effect only + when the start_filtering() function is called next time. The parent pointer in + the struct is initialized by the API implementation to the value of the feed + parameter. The priv pointer is not used by the API implementation, and can + thus be freely utilized by the caller of this function. Any data pointed to by the + priv pointer is available to the recipient of the dmx_section_cb() function call. + + +While the maximum section filter length (DMX_MAX_FILTER_SIZE) is + currently set at 16 bytes, hardware filters of that size are not available on all + platforms. Therefore, section filtering will often take place first in hardware, + followed by filtering in software for the header bytes that were not covered + by a hardware filter. The filter_mask field can be checked to determine how + many bytes of the section filter are actually used, and if the hardware filter will + suffice. Additionally, software-only section filters can optionally be allocated + to clients when all hardware section filters are in use. Note that on most demux + hardware it is not possible to filter on the section_length field of the section + header – thus this field is ignored, even though it is included in filter_value and + filter_mask fields. + + +SYNOPSIS + + +int allocate_filter(dmx_section_feed_t⋆ feed, + dmx_section_filter_t⋆⋆ filter); + + +PARAMETERS + + +dmx_section_feed_t* + feed + +Pointer to the section feed API and instance data. + + +dmx_section_filter_t** + filter + +Pointer to the allocated filter. + + +RETURNS + + +0 + +The function was completed without errors. + + +-ENOSPC + +No filters of given type and length available. + + +-EINVAL + +Bad parameters. + + + +
release_filter() +DESCRIPTION + + +This function releases all the resources of a previously allocated section filter. + The function should not be called while filtering is in progress on this section + feed. After calling this function, the caller should not try to dereference the + filter pointer. + + +SYNOPSIS + + +int release_filter ( dmx_section_feed_t⋆ feed, + dmx_section_filter_t⋆ filter); + + +PARAMETERS + + +dmx_section_feed_t* + feed + +Pointer to the section feed API and instance data. + + +dmx_section_filter_t* + filter + +I/O Pointer to the instance data of a section filter. + + +RETURNS + + +0 + +The function was completed without errors. + + +-ENODEV + +No such filter allocated. + + +-EINVAL + +Bad parameter. + + + +
start_filtering() +DESCRIPTION + + +Starts filtering sections on this section feed, according to its settings. Sections + are first filtered based on their PID and then matched with the section + filters allocated for this feed. If the section matches the PID filter and + at least one section filter, it is delivered to the API client. The section + is delivered asynchronously using the callback function registered with + allocate_section_feed(). + + +SYNOPSIS + + +int start_filtering ( dmx_section_feed_t⋆ feed ); + + +PARAMETERS + + +dmx_section_feed_t* + feed + +Pointer to the section feed API and instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EINVAL + +Bad parameter. + + + +
stop_filtering() +DESCRIPTION + + +Stops filtering sections on this section feed. Note that any changes to the + filtering parameters (filter_value, filter_mask, etc.) should only be made when + filtering is stopped. + + +SYNOPSIS + + +int stop_filtering ( dmx_section_feed_t⋆ feed ); + + +PARAMETERS + + +dmx_section_feed_t* + feed + +Pointer to the section feed API and instance data. + + +RETURNS + + +0 + +The function was completed without errors. + + +-EINVAL + +Bad parameter. + + + +
diff --git a/Documentation/DocBook/dvb/net.xml b/Documentation/DocBook/dvb/net.xml new file mode 100644 index 00000000000..94e388d94c0 --- /dev/null +++ b/Documentation/DocBook/dvb/net.xml @@ -0,0 +1,12 @@ +DVB Network API +The DVB net device enables feeding of MPE (multi protocol encapsulation) packets +received via DVB into the Linux network protocol stack, e.g. for internet via satellite +applications. It can be accessed through /dev/dvb/adapter0/net0. Data types and +and ioctl definitions can be accessed by including linux/dvb/net.h in your +application. + +
+DVB Net Data Types +To be written… + +
diff --git a/Documentation/DocBook/dvb/video.xml b/Documentation/DocBook/dvb/video.xml new file mode 100644 index 00000000000..7bb287e67c8 --- /dev/null +++ b/Documentation/DocBook/dvb/video.xml @@ -0,0 +1,1971 @@ +DVB Video Device +The DVB video device controls the MPEG2 video decoder of the DVB hardware. It +can be accessed through /dev/dvb/adapter0/video0. Data types and and +ioctl definitions can be accessed by including linux/dvb/video.h in your +application. + +Note that the DVB video device only controls decoding of the MPEG video stream, not +its presentation on the TV or computer screen. On PCs this is typically handled by an +associated video4linux device, e.g. /dev/video, which allows scaling and defining output +windows. + +Some DVB cards don’t have their own MPEG decoder, which results in the omission of +the audio and video device as well as the video4linux device. + +The ioctls that deal with SPUs (sub picture units) and navigation packets are only +supported on some MPEG decoders made for DVD playback. + +
+Video Data Types + +
+video_format_t +The video_format_t data type defined by + + + typedef enum { + VIDEO_FORMAT_4_3, + VIDEO_FORMAT_16_9 + } video_format_t; + +is used in the VIDEO_SET_FORMAT function (??) to tell the driver which aspect ratio +the output hardware (e.g. TV) has. It is also used in the data structures video_status +(??) returned by VIDEO_GET_STATUS (??) and video_event (??) returned by +VIDEO_GET_EVENT (??) which report about the display format of the current video +stream. + +
+ +
+video_display_format_t +In case the display format of the video stream and of the display hardware differ the +application has to specify how to handle the cropping of the picture. This can be done using +the VIDEO_SET_DISPLAY_FORMAT call (??) which accepts + + + typedef enum { + VIDEO_PAN_SCAN, + VIDEO_LETTER_BOX, + VIDEO_CENTER_CUT_OUT + } video_display_format_t; + +as argument. + +
+ +
+video stream source +The video stream source is set through the VIDEO_SELECT_SOURCE call and can take +the following values, depending on whether we are replaying from an internal (demuxer) or +external (user write) source. + + + typedef enum { + VIDEO_SOURCE_DEMUX, + VIDEO_SOURCE_MEMORY + } video_stream_source_t; + +VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the frontend or the +DVR device) as the source of the video stream. If VIDEO_SOURCE_MEMORY +is selected the stream comes from the application through the write() system +call. + +
+ +
+video play state +The following values can be returned by the VIDEO_GET_STATUS call representing the +state of video playback. + + + typedef enum { + VIDEO_STOPPED, + VIDEO_PLAYING, + VIDEO_FREEZED + } video_play_state_t; + +
+ +
+struct video_event +The following is the structure of a video event as it is returned by the VIDEO_GET_EVENT +call. + + + struct video_event { + int32_t type; + time_t timestamp; + union { + video_format_t video_format; + } u; + }; + +
+ +
+struct video_status +The VIDEO_GET_STATUS call returns the following structure informing about various +states of the playback operation. + + + struct video_status { + boolean video_blank; + video_play_state_t play_state; + video_stream_source_t stream_source; + video_format_t video_format; + video_displayformat_t display_format; + }; + +If video_blank is set video will be blanked out if the channel is changed or if playback is +stopped. Otherwise, the last picture will be displayed. play_state indicates if the video is +currently frozen, stopped, or being played back. The stream_source corresponds to the seleted +source for the video stream. It can come either from the demultiplexer or from memory. +The video_format indicates the aspect ratio (one of 4:3 or 16:9) of the currently +played video stream. Finally, display_format corresponds to the selected cropping +mode in case the source video format is not the same as the format of the output +device. + +
+ +
+struct video_still_picture +An I-frame displayed via the VIDEO_STILLPICTURE call is passed on within the +following structure. + + + /⋆ pointer to and size of a single iframe in memory ⋆/ + struct video_still_picture { + char ⋆iFrame; + int32_t size; + }; + +
+ +
+video capabilities +A call to VIDEO_GET_CAPABILITIES returns an unsigned integer with the following +bits set according to the hardwares capabilities. + + + /⋆ bit definitions for capabilities: ⋆/ + /⋆ can the hardware decode MPEG1 and/or MPEG2? ⋆/ + #define VIDEO_CAP_MPEG1 1 + #define VIDEO_CAP_MPEG2 2 + /⋆ can you send a system and/or program stream to video device? + (you still have to open the video and the audio device but only + send the stream to the video device) ⋆/ + #define VIDEO_CAP_SYS 4 + #define VIDEO_CAP_PROG 8 + /⋆ can the driver also handle SPU, NAVI and CSS encoded data? + (CSS API is not present yet) ⋆/ + #define VIDEO_CAP_SPU 16 + #define VIDEO_CAP_NAVI 32 + #define VIDEO_CAP_CSS 64 + +
+ +
+video system +A call to VIDEO_SET_SYSTEM sets the desired video system for TV output. The +following system types can be set: + + + typedef enum { + VIDEO_SYSTEM_PAL, + VIDEO_SYSTEM_NTSC, + VIDEO_SYSTEM_PALN, + VIDEO_SYSTEM_PALNc, + VIDEO_SYSTEM_PALM, + VIDEO_SYSTEM_NTSC60, + VIDEO_SYSTEM_PAL60, + VIDEO_SYSTEM_PALM60 + } video_system_t; + +
+ +
+struct video_highlight +Calling the ioctl VIDEO_SET_HIGHLIGHTS posts the SPU highlight information. The +call expects the following format for that information: + + + typedef + struct video_highlight { + boolean active; /⋆ 1=show highlight, 0=hide highlight ⋆/ + uint8_t contrast1; /⋆ 7- 4 Pattern pixel contrast ⋆/ + /⋆ 3- 0 Background pixel contrast ⋆/ + uint8_t contrast2; /⋆ 7- 4 Emphasis pixel-2 contrast ⋆/ + /⋆ 3- 0 Emphasis pixel-1 contrast ⋆/ + uint8_t color1; /⋆ 7- 4 Pattern pixel color ⋆/ + /⋆ 3- 0 Background pixel color ⋆/ + uint8_t color2; /⋆ 7- 4 Emphasis pixel-2 color ⋆/ + /⋆ 3- 0 Emphasis pixel-1 color ⋆/ + uint32_t ypos; /⋆ 23-22 auto action mode ⋆/ + /⋆ 21-12 start y ⋆/ + /⋆ 9- 0 end y ⋆/ + uint32_t xpos; /⋆ 23-22 button color number ⋆/ + /⋆ 21-12 start x ⋆/ + /⋆ 9- 0 end x ⋆/ + } video_highlight_t; + + +
+
+video SPU +Calling VIDEO_SET_SPU deactivates or activates SPU decoding, according to the +following format: + + + typedef + struct video_spu { + boolean active; + int stream_id; + } video_spu_t; + + +
+
+video SPU palette +The following structure is used to set the SPU palette by calling VIDEO_SPU_PALETTE: + + + typedef + struct video_spu_palette{ + int length; + uint8_t ⋆palette; + } video_spu_palette_t; + + +
+
+video NAVI pack +In order to get the navigational data the following structure has to be passed to the ioctl +VIDEO_GET_NAVI: + + + typedef + struct video_navi_pack{ + int length; /⋆ 0 ... 1024 ⋆/ + uint8_t data[1024]; + } video_navi_pack_t; + +
+ + +
+video attributes +The following attributes can be set by a call to VIDEO_SET_ATTRIBUTES: + + + typedef uint16_t video_attributes_t; + /⋆ bits: descr. ⋆/ + /⋆ 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) ⋆/ + /⋆ 13-12 TV system (0=525/60, 1=625/50) ⋆/ + /⋆ 11-10 Aspect ratio (0=4:3, 3=16:9) ⋆/ + /⋆ 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca ⋆/ + /⋆ 7 line 21-1 data present in GOP (1=yes, 0=no) ⋆/ + /⋆ 6 line 21-2 data present in GOP (1=yes, 0=no) ⋆/ + /⋆ 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 ⋆/ + /⋆ 2 source letterboxed (1=yes, 0=no) ⋆/ + /⋆ 0 film/camera mode (0=camera, 1=film (625/50 only)) ⋆/ + +
+ + +
+Video Function Calls + + +
+open() +DESCRIPTION + + +This system call opens a named video device (e.g. /dev/dvb/adapter0/video0) + for subsequent use. +When an open() call has succeeded, the device will be ready for use. + The significance of blocking or non-blocking mode is described in the + documentation for functions where there is a difference. It does not affect the + semantics of the open() call itself. A device opened in blocking mode can later + be put into non-blocking mode (and vice versa) using the F_SETFL command + of the fcntl system call. This is a standard system call, documented in the Linux + manual page for fcntl. Only one user can open the Video Device in O_RDWR + mode. All other attempts to open the device in this mode will fail, and an + error-code will be returned. If the Video Device is opened in O_RDONLY + mode, the only ioctl call that can be used is VIDEO_GET_STATUS. All other + call will return an error code. + + + +SYNOPSIS + + +int open(const char ⋆deviceName, int flags); + + +PARAMETERS + + +const char + *deviceName + +Name of specific video device. + + +int flags + +A bit-wise OR of the following flags: + + + +O_RDONLY read-only access + + + +O_RDWR read/write access + + + +O_NONBLOCK open in non-blocking mode + + + +(blocking mode is the default) + + +ERRORS + + +ENODEV + +Device driver not loaded/available. + + +EINTERNAL + +Internal error. + + +EBUSY + +Device or resource busy. + + +EINVAL + +Invalid argument. + + + +
+
+close() +DESCRIPTION + + +This system call closes a previously opened video device. + + +SYNOPSIS + + +int close(int fd); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + + +
+
+write() +DESCRIPTION + + +This system call can only be used if VIDEO_SOURCE_MEMORY is selected + in the ioctl call VIDEO_SELECT_SOURCE. The data provided shall be in + PES format, unless the capability allows other formats. If O_NONBLOCK is + not specified the function will block until buffer space is available. The amount + of data to be transferred is implied by count. + + +SYNOPSIS + + +size_t write(int fd, const void ⋆buf, size_t count); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +void *buf + +Pointer to the buffer containing the PES data. + + +size_t count + +Size of buf. + + +ERRORS + + +EPERM + +Mode VIDEO_SOURCE_MEMORY not selected. + + +ENOMEM + +Attempted to write more data than the internal buffer can + hold. + + +EBADF + +fd is not a valid open file descriptor. + + + +
VIDEO_STOP +DESCRIPTION + + +This ioctl call asks the Video Device to stop playing the current stream. + Depending on the input parameter, the screen can be blanked out or displaying + the last decoded frame. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_STOP, boolean + mode); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_STOP for this command. + + +Boolean mode + +Indicates how the screen shall be handled. + + + +TRUE: Blank screen when stop. + + + +FALSE: Show last decoded frame. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error, possibly in the communication with the + DVB subsystem. + + + +
VIDEO_PLAY +DESCRIPTION + + +This ioctl call asks the Video Device to start playing a video stream from the + selected source. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_PLAY); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_PLAY for this command. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error, possibly in the communication with the + DVB subsystem. + + + +
VIDEO_FREEZE +DESCRIPTION + + +This ioctl call suspends the live video stream being played. Decoding + and playing are frozen. It is then possible to restart the decoding + and playing process of the video stream using the VIDEO_CONTINUE + command. If VIDEO_SOURCE_MEMORY is selected in the ioctl call + VIDEO_SELECT_SOURCE, the DVB subsystem will not decode any more + data until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_FREEZE); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_FREEZE for this command. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error, possibly in the communication with the + DVB subsystem. + + + +
VIDEO_CONTINUE +DESCRIPTION + + +This ioctl call restarts decoding and playing processes of the video stream + which was played before a call to VIDEO_FREEZE was made. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_CONTINUE); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_CONTINUE for this command. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error, possibly in the communication with the + DVB subsystem. + + + +
VIDEO_SELECT_SOURCE +DESCRIPTION + + +This ioctl call informs the video device which source shall be used for the input + data. The possible sources are demux or memory. If memory is selected, the + data is fed to the video device through the write command. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_SELECT_SOURCE, + video_stream_source_t source); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SELECT_SOURCE for this command. + + +video_stream_source_t + source + +Indicates which source shall be used for the Video stream. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error, possibly in the communication with the + DVB subsystem. + + + +
VIDEO_SET_BLANK +DESCRIPTION + + +This ioctl call asks the Video Device to blank out the picture. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_SET_BLANK, boolean + mode); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SET_BLANK for this command. + + +boolean mode + +TRUE: Blank screen when stop. + + + +FALSE: Show last decoded frame. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error, possibly in the communication with the + DVB subsystem. + + +EINVAL + +Illegal input parameter + + + +
VIDEO_GET_STATUS +DESCRIPTION + + +This ioctl call asks the Video Device to return the current status of the device. + + +SYNOPSIS + + + int ioctl(fd, int request = VIDEO_GET_STATUS, struct + video_status ⋆status); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_STATUS for this command. + + +struct video_status + *status + +Returns the current status of the Video Device. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error, possibly in the communication with the + DVB subsystem. + + +EFAULT + +status points to invalid address + + + +
VIDEO_GET_EVENT +DESCRIPTION + + +This ioctl call returns an event of type video_event if available. If an event is + not available, the behavior depends on whether the device is in blocking or + non-blocking mode. In the latter case, the call fails immediately with errno + set to EWOULDBLOCK. In the former case, the call blocks until an event + becomes available. The standard Linux poll() and/or select() system calls can + be used with the device file descriptor to watch for new events. For select(), + the file descriptor should be included in the exceptfds argument, and for + poll(), POLLPRI should be specified as the wake-up condition. Read-only + permissions are sufficient for this ioctl call. + + +SYNOPSIS + + + int ioctl(fd, int request = VIDEO_GET_EVENT, struct + video_event ⋆ev); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_EVENT for this command. + + +struct video_event + *ev + +Points to the location where the event, if any, is to be + stored. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EFAULT + +ev points to invalid address + + +EWOULDBLOCK + +There is no event pending, and the device is in + non-blocking mode. + + +EOVERFLOW + + + + +Overflow in event queue - one or more events were lost. + + + +
VIDEO_SET_DISPLAY_FORMAT +DESCRIPTION + + +This ioctl call asks the Video Device to select the video format to be applied + by the MPEG chip on the video. + + +SYNOPSIS + + + int ioctl(fd, int request = + VIDEO_SET_DISPLAY_FORMAT, video_display_format_t + format); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SET_DISPLAY_FORMAT for this + command. + + +video_display_format_t + format + +Selects the video format to be used. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error. + + +EINVAL + +Illegal parameter format. + + + +
VIDEO_STILLPICTURE +DESCRIPTION + + +This ioctl call asks the Video Device to display a still picture (I-frame). The + input data shall contain an I-frame. If the pointer is NULL, then the current + displayed still picture is blanked. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_STILLPICTURE, + struct video_still_picture ⋆sp); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_STILLPICTURE for this command. + + +struct + video_still_picture + *sp + +Pointer to a location where an I-frame and size is stored. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error. + + +EFAULT + +sp points to an invalid iframe. + + + +
VIDEO_FAST_FORWARD +DESCRIPTION + + +This ioctl call asks the Video Device to skip decoding of N number of I-frames. + This call can only be used if VIDEO_SOURCE_MEMORY is selected. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_FAST_FORWARD, int + nFrames); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_FAST_FORWARD for this command. + + +int nFrames + +The number of frames to skip. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error. + + +EPERM + +Mode VIDEO_SOURCE_MEMORY not selected. + + +EINVAL + +Illegal parameter format. + + + +
VIDEO_SLOWMOTION +DESCRIPTION + + +This ioctl call asks the video device to repeat decoding frames N number of + times. This call can only be used if VIDEO_SOURCE_MEMORY is selected. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_SLOWMOTION, int + nFrames); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SLOWMOTION for this command. + + +int nFrames + +The number of times to repeat each frame. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINTERNAL + +Internal error. + + +EPERM + +Mode VIDEO_SOURCE_MEMORY not selected. + + +EINVAL + +Illegal parameter format. + + + +
VIDEO_GET_CAPABILITIES +DESCRIPTION + + +This ioctl call asks the video device about its decoding capabilities. On success + it returns and integer which has bits set according to the defines in section ??. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_GET_CAPABILITIES, + unsigned int ⋆cap); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_CAPABILITIES for this + command. + + +unsigned int *cap + +Pointer to a location where to store the capability + information. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EFAULT + +cap points to an invalid iframe. + + + +
VIDEO_SET_ID +DESCRIPTION + + +This ioctl selects which sub-stream is to be decoded if a program or system + stream is sent to the video device. + + +SYNOPSIS + + +int ioctl(int fd, int request = VIDEO_SET_ID, int + id); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SET_ID for this command. + + +int id + +video sub-stream id + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINTERNAL + +Internal error. + + +EINVAL + +Invalid sub-stream id. + + + +
VIDEO_CLEAR_BUFFER +DESCRIPTION + + +This ioctl call clears all video buffers in the driver and in the decoder hardware. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_CLEAR_BUFFER); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_CLEAR_BUFFER for this command. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + + +
VIDEO_SET_STREAMTYPE +DESCRIPTION + + +This ioctl tells the driver which kind of stream to expect being written to it. If + this call is not used the default of video PES is used. Some drivers might not + support this call and always expect PES. + + +SYNOPSIS + + +int ioctl(fd, int request = VIDEO_SET_STREAMTYPE, + int type); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SET_STREAMTYPE for this command. + + +int type + +stream type + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINVAL + +type is not a valid or supported stream type. + + + +
VIDEO_SET_FORMAT +DESCRIPTION + + +This ioctl sets the screen format (aspect ratio) of the connected output device + (TV) so that the output of the decoder can be adjusted accordingly. + + +SYNOPSIS + + + int ioctl(fd, int request = VIDEO_SET_FORMAT, + video_format_t format); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SET_FORMAT for this command. + + +video_format_t + format + +video format of TV as defined in section ??. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINVAL + +format is not a valid video format. + + + +
VIDEO_SET_SYSTEM +DESCRIPTION + + +This ioctl sets the television output format. The format (see section ??) may + vary from the color format of the displayed MPEG stream. If the hardware is + not able to display the requested format the call will return an error. + + +SYNOPSIS + + + int ioctl(fd, int request = VIDEO_SET_SYSTEM , + video_system_t system); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SET_FORMAT for this command. + + +video_system_t + system + +video system of TV output. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINVAL + +system is not a valid or supported video system. + + + +
VIDEO_SET_HIGHLIGHT +DESCRIPTION + + +This ioctl sets the SPU highlight information for the menu access of a DVD. + + +SYNOPSIS + + + int ioctl(fd, int request = VIDEO_SET_HIGHLIGHT + ,video_highlight_t ⋆vhilite) + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SET_HIGHLIGHT for this command. + + +video_highlight_t + *vhilite + +SPU Highlight information according to section ??. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor. + + +EINVAL + +input is not a valid highlight setting. + + + +
VIDEO_SET_SPU +DESCRIPTION + + +This ioctl activates or deactivates SPU decoding in a DVD input stream. It can + only be used, if the driver is able to handle a DVD stream. + + +SYNOPSIS + + + int ioctl(fd, int request = VIDEO_SET_SPU , + video_spu_t ⋆spu) + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SET_SPU for this command. + + +video_spu_t *spu + +SPU decoding (de)activation and subid setting according + to section ??. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINVAL + +input is not a valid spu setting or driver cannot handle + SPU. + + + +
VIDEO_SET_SPU_PALETTE +DESCRIPTION + + +This ioctl sets the SPU color palette. + + +SYNOPSIS + + + int ioctl(fd, int request = VIDEO_SET_SPU_PALETTE + ,video_spu_palette_t ⋆palette ) + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SET_SPU_PALETTE for this command. + + +video_spu_palette_t + *palette + +SPU palette according to section ??. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINVAL + +input is not a valid palette or driver doesn’t handle SPU. + + + +
VIDEO_GET_NAVI +DESCRIPTION + + +This ioctl returns navigational information from the DVD stream. This is + especially needed if an encoded stream has to be decoded by the hardware. + + +SYNOPSIS + + + int ioctl(fd, int request = VIDEO_GET_NAVI , + video_navi_pack_t ⋆navipack) + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_NAVI for this command. + + +video_navi_pack_t + *navipack + +PCI or DSI pack (private stream 2) according to section + ??. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EFAULT + +driver is not able to return navigational information + + + +
VIDEO_SET_ATTRIBUTES +DESCRIPTION + + +This ioctl is intended for DVD playback and allows you to set certain + information about the stream. Some hardware may not need this information, + but the call also tells the hardware to prepare for DVD playback. + + +SYNOPSIS + + + int ioctl(fd, int request = VIDEO_SET_ATTRIBUTE + ,video_attributes_t vattr) + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_SET_ATTRIBUTE for this command. + + +video_attributes_t + vattr + +video attributes according to section ??. + + +ERRORS + + +EBADF + +fd is not a valid open file descriptor + + +EINVAL + +input is not a valid attribute setting. + + +
diff --git a/Documentation/DocBook/media-entities.xml b/Documentation/DocBook/media-entities.xml new file mode 100644 index 00000000000..f5d59838ad3 --- /dev/null +++ b/Documentation/DocBook/media-entities.xml @@ -0,0 +1,363 @@ + + + +close()"> +ioctl()"> +mmap()"> +munmap()"> +open()"> +poll()"> +read()"> +select()"> +write()"> + + +VIDIOC_CROPCAP"> +VIDIOC_DBG_G_CHIP_IDENT"> +VIDIOC_DBG_G_REGISTER"> +VIDIOC_DBG_S_REGISTER"> +VIDIOC_DQBUF"> +VIDIOC_ENCODER_CMD"> +VIDIOC_ENUMAUDIO"> +VIDIOC_ENUMAUDOUT"> +VIDIOC_ENUMINPUT"> +VIDIOC_ENUMOUTPUT"> +VIDIOC_ENUMSTD"> +VIDIOC_ENUM_FMT"> +VIDIOC_ENUM_FRAMEINTERVALS"> +VIDIOC_ENUM_FRAMESIZES"> +VIDIOC_G_AUDIO"> +VIDIOC_G_AUDOUT"> +VIDIOC_G_CROP"> +VIDIOC_G_CTRL"> +VIDIOC_G_ENC_INDEX"> +VIDIOC_G_EXT_CTRLS"> +VIDIOC_G_FBUF"> +VIDIOC_G_FMT"> +VIDIOC_G_FREQUENCY"> +VIDIOC_G_INPUT"> +VIDIOC_G_JPEGCOMP"> +VIDIOC_G_MPEGCOMP"> +VIDIOC_G_MODULATOR"> +VIDIOC_G_OUTPUT"> +VIDIOC_G_PARM"> +VIDIOC_G_PRIORITY"> +VIDIOC_G_SLICED_VBI_CAP"> +VIDIOC_G_STD"> +VIDIOC_G_TUNER"> +VIDIOC_LOG_STATUS"> +VIDIOC_OVERLAY"> +VIDIOC_QBUF"> +VIDIOC_QUERYBUF"> +VIDIOC_QUERYCAP"> +VIDIOC_QUERYCTRL"> +VIDIOC_QUERYMENU"> +VIDIOC_QUERYSTD"> +VIDIOC_REQBUFS"> +VIDIOC_STREAMOFF"> +VIDIOC_STREAMON"> +VIDIOC_S_AUDIO"> +VIDIOC_S_AUDOUT"> +VIDIOC_S_CROP"> +VIDIOC_S_CTRL"> +VIDIOC_S_EXT_CTRLS"> +VIDIOC_S_FBUF"> +VIDIOC_S_FMT"> +VIDIOC_S_FREQUENCY"> +VIDIOC_S_HW_FREQ_SEEK"> +VIDIOC_S_INPUT"> +VIDIOC_S_JPEGCOMP"> +VIDIOC_S_MPEGCOMP"> +VIDIOC_S_MODULATOR"> +VIDIOC_S_OUTPUT"> +VIDIOC_S_PARM"> +VIDIOC_S_PRIORITY"> +VIDIOC_S_STD"> +VIDIOC_S_TUNER"> +VIDIOC_TRY_ENCODER_CMD"> +VIDIOC_TRY_EXT_CTRLS"> +VIDIOC_TRY_FMT"> + + +v4l2_std_id"> + + +v4l2_buf_type"> +v4l2_colorspace"> +v4l2_ctrl_type"> +v4l2_exposure_auto_type"> +v4l2_field"> +v4l2_frmivaltypes"> +v4l2_frmsizetypes"> +v4l2_memory"> +v4l2_mpeg_audio_ac3_bitrate"> +v4l2_mpeg_audio_crc"> +v4l2_mpeg_audio_emphasis"> +v4l2_mpeg_audio_encoding"> +v4l2_mpeg_audio_l1_bitrate"> +v4l2_mpeg_audio_l2_bitrate"> +v4l2_mpeg_audio_l3_bitrate"> +v4l2_mpeg_audio_mode"> +v4l2_mpeg_audio_mode_extension"> +v4l2_mpeg_audio_sampling_freq"> +v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type"> +v4l2_mpeg_cx2341x_video_luma_spatial_filter_type"> +v4l2_mpeg_cx2341x_video_median_filter_type"> +v4l2_mpeg_cx2341x_video_spatial_filter_mode"> +v4l2_mpeg_cx2341x_video_temporal_filter_mode"> +v4l2_mpeg_stream_type"> +v4l2_mpeg_stream_vbi_fmt"> +v4l2_mpeg_video_aspect"> +v4l2_mpeg_video_bitrate_mode"> +v4l2_mpeg_video_encoding"> +v4l2_power_line_frequency"> +v4l2_priority"> +v4l2_tuner_type"> +v4l2_preemphasis"> + + +v4l2_audio"> +v4l2_audioout"> +v4l2_buffer"> +v4l2_capability"> +v4l2_captureparm"> +v4l2_clip"> +v4l2_control"> +v4l2_crop"> +v4l2_cropcap"> +v4l2_dbg_chip_ident"> +v4l2_dbg_match"> +v4l2_dbg_register"> +v4l2_enc_idx"> +v4l2_enc_idx_entry"> +v4l2_encoder_cmd"> +v4l2_ext_control"> +v4l2_ext_controls"> +v4l2_fmtdesc"> +v4l2_format"> +v4l2_fract"> +v4l2_framebuffer"> +v4l2_frequency"> +v4l2_frmival_stepwise"> +v4l2_frmivalenum"> +v4l2_frmsize_discrete"> +v4l2_frmsize_stepwise"> +v4l2_frmsizeenum"> +v4l2_hw_freq_seek"> +v4l2_input"> +v4l2_jpegcompression"> +v4l2_modulator"> +v4l2_mpeg_vbi_fmt_ivtv"> +v4l2_output"> +v4l2_outputparm"> +v4l2_pix_format"> +v4l2_queryctrl"> +v4l2_querymenu"> +v4l2_rect"> +v4l2_requestbuffers"> +v4l2_sliced_vbi_cap"> +v4l2_sliced_vbi_data"> +v4l2_sliced_vbi_format"> +v4l2_standard"> +v4l2_streamparm"> +v4l2_timecode"> +v4l2_tuner"> +v4l2_vbi_format"> +v4l2_window"> + + +EACCES error code"> +EAGAIN error code"> +EBADF error code"> +EBUSY error code"> +EFAULT error code"> +EIO error code"> +EINTR error code"> +EINVAL error code"> +ENFILE error code"> +ENOMEM error code"> +ENOSPC error code"> +ENOTTY error code"> +ENXIO error code"> +EMFILE error code"> +EPERM error code"> +ERANGE error code"> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Documentation/DocBook/media-indices.xml b/Documentation/DocBook/media-indices.xml new file mode 100644 index 00000000000..9e30a236d74 --- /dev/null +++ b/Documentation/DocBook/media-indices.xml @@ -0,0 +1,85 @@ + + +List of Types +v4l2_std_id +enum v4l2_buf_type +enum v4l2_colorspace +enum v4l2_ctrl_type +enum v4l2_exposure_auto_type +enum v4l2_field +enum v4l2_frmivaltypes +enum v4l2_frmsizetypes +enum v4l2_memory +enum v4l2_mpeg_audio_ac3_bitrate +enum v4l2_mpeg_audio_crc +enum v4l2_mpeg_audio_emphasis +enum v4l2_mpeg_audio_encoding +enum v4l2_mpeg_audio_l1_bitrate +enum v4l2_mpeg_audio_l2_bitrate +enum v4l2_mpeg_audio_l3_bitrate +enum v4l2_mpeg_audio_mode +enum v4l2_mpeg_audio_mode_extension +enum v4l2_mpeg_audio_sampling_freq +enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type +enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type +enum v4l2_mpeg_cx2341x_video_median_filter_type +enum v4l2_mpeg_cx2341x_video_spatial_filter_mode +enum v4l2_mpeg_cx2341x_video_temporal_filter_mode +enum v4l2_mpeg_stream_type +enum v4l2_mpeg_stream_vbi_fmt +enum v4l2_mpeg_video_aspect +enum v4l2_mpeg_video_bitrate_mode +enum v4l2_mpeg_video_encoding +enum v4l2_power_line_frequency +enum v4l2_priority +enum v4l2_tuner_type +enum v4l2_preemphasis +struct v4l2_audio +struct v4l2_audioout +struct v4l2_buffer +struct v4l2_capability +struct v4l2_captureparm +struct v4l2_clip +struct v4l2_control +struct v4l2_crop +struct v4l2_cropcap +struct v4l2_dbg_chip_ident +struct v4l2_dbg_match +struct v4l2_dbg_register +struct v4l2_enc_idx +struct v4l2_enc_idx_entry +struct v4l2_encoder_cmd +struct v4l2_ext_control +struct v4l2_ext_controls +struct v4l2_fmtdesc +struct v4l2_format +struct v4l2_fract +struct v4l2_framebuffer +struct v4l2_frequency +struct v4l2_frmival_stepwise +struct v4l2_frmivalenum +struct v4l2_frmsize_discrete +struct v4l2_frmsize_stepwise +struct v4l2_frmsizeenum +struct v4l2_hw_freq_seek +struct v4l2_input +struct v4l2_jpegcompression +struct v4l2_modulator +struct v4l2_mpeg_vbi_fmt_ivtv +struct v4l2_output +struct v4l2_outputparm +struct v4l2_pix_format +struct v4l2_queryctrl +struct v4l2_querymenu +struct v4l2_rect +struct v4l2_requestbuffers +struct v4l2_sliced_vbi_cap +struct v4l2_sliced_vbi_data +struct v4l2_sliced_vbi_format +struct v4l2_standard +struct v4l2_streamparm +struct v4l2_timecode +struct v4l2_tuner +struct v4l2_vbi_format +struct v4l2_window + diff --git a/Documentation/DocBook/media.xml b/Documentation/DocBook/media.xml new file mode 100644 index 00000000000..14302589d55 --- /dev/null +++ b/Documentation/DocBook/media.xml @@ -0,0 +1,112 @@ + + %media-entities; + + + + +open()."> +2C"> +Return ValueOn success 0 is returned, on error -1 and the errno variable is set appropriately:"> +2"> + + +"> +"> +"> + + +http://www.linuxtv.org/lists.php"> + + +http://linuxtv.org/repo/"> +]> + + + +LINUX MEDIA INFRASTRUCTURE API + + + 2009 + LinuxTV Developers + + + + +Permission is granted to copy, distribute and/or modify +this document under the terms of the GNU Free Documentation License, +Version 1.1 or any later version published by the Free Software +Foundation. A copy of the license is included in the chapter entitled +"GNU Free Documentation License" + + + + + + + + Introduction + + This document covers the Linux Kernel to Userspace API's used by + video and radio straming devices, including video cameras, + analog and digital TV receiver cards, AM/FM receiver cards, + streaming capture devices. + It is divided into three parts. + The first part covers radio, capture, + cameras and analog TV devices. + The second part covers the + API used for digital TV and Internet reception via one of the + several digital tv standards. While it is called as DVB API, + in fact it covers several different video standards including + DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated + to documment support also for DVB-S2, ISDB-T and ISDB-S. + The third part covers other API's used by all media infrastructure devices + For additional information and for the latest development code, + see: http://linuxtv.org. + For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: Linux Media Mailing List (LMML).. + + + + +&sub-v4l2; + + +&sub-dvbapi; + + + + + +Mauro +Chehab +Carvalho +
mchehab@redhat.com
 +Initial version. + + + + 2009 + Mauro Carvalho Chehab + + + + + +1.0.0 +2009-09-06 +mcc +Initial revision + + + + +Other API's used by media infrastructure drivers + +&sub-remote_controllers; + + + +&sub-fdl-appendix; + + diff --git a/Documentation/DocBook/v4l/biblio.xml b/Documentation/DocBook/v4l/biblio.xml new file mode 100644 index 00000000000..afc8a0dd260 --- /dev/null +++ b/Documentation/DocBook/v4l/biblio.xml @@ -0,0 +1,188 @@ + + References + + + EIA 608-B + + Electronic Industries Alliance (http://www.eia.org) + + EIA 608-B "Recommended Practice for Line 21 Data +Service" + + + + EN 300 294 + + European Telecommunication Standards Institute +(http://www.etsi.org) + + EN 300 294 "625-line television Wide Screen Signalling +(WSS)" + + + + ETS 300 231 + + European Telecommunication Standards Institute +(http://www.etsi.org) + + ETS 300 231 "Specification of the domestic video +Programme Delivery Control system (PDC)" + + + + ETS 300 706 + + European Telecommunication Standards Institute +(http://www.etsi.org) + + ETS 300 706 "Enhanced Teletext specification" + + + + ISO 13818-1 + + International Telecommunication Union (http://www.itu.ch), International +Organisation for Standardisation (http://www.iso.ch) + + ITU-T Rec. H.222.0 | ISO/IEC 13818-1 "Information +technology — Generic coding of moving pictures and associated +audio information: Systems" + + + + ISO 13818-2 + + International Telecommunication Union (http://www.itu.ch), International +Organisation for Standardisation (http://www.iso.ch) + + ITU-T Rec. H.262 | ISO/IEC 13818-2 "Information +technology — Generic coding of moving pictures and associated +audio information: Video" + + + + ITU BT.470 + + International Telecommunication Union (http://www.itu.ch) + + ITU-R Recommendation BT.470-6 "Conventional Television +Systems" + + + + ITU BT.601 + + International Telecommunication Union (http://www.itu.ch) + + ITU-R Recommendation BT.601-5 "Studio Encoding Parameters +of Digital Television for Standard 4:3 and Wide-Screen 16:9 Aspect +Ratios" + + + + ITU BT.653 + + International Telecommunication Union (http://www.itu.ch) + + ITU-R Recommendation BT.653-3 "Teletext systems" + + + + ITU BT.709 + + International Telecommunication Union (http://www.itu.ch) + + ITU-R Recommendation BT.709-5 "Parameter values for the +HDTV standards for production and international programme +exchange" + + + + ITU BT.1119 + + International Telecommunication Union (http://www.itu.ch) + + ITU-R Recommendation BT.1119 "625-line +television Wide Screen Signalling (WSS)" + + + + JFIF + + Independent JPEG Group (http://www.ijg.org) + + JPEG File Interchange Format + Version 1.02 + + + + SMPTE 12M + + Society of Motion Picture and Television Engineers +(http://www.smpte.org) + + SMPTE 12M-1999 "Television, Audio and Film - Time and +Control Code" + + + + SMPTE 170M + + Society of Motion Picture and Television Engineers +(http://www.smpte.org) + + SMPTE 170M-1999 "Television - Composite Analog Video +Signal - NTSC for Studio Applications" + + + + SMPTE 240M + + Society of Motion Picture and Television Engineers +(http://www.smpte.org) + + SMPTE 240M-1999 "Television - Signal Parameters - +1125-Line High-Definition Production" + + + + EN 50067 + + European Committee for Electrotechnical Standardization +(http://www.cenelec.eu) + + Specification of the radio data system (RDS) for VHF/FM sound broadcasting +in the frequency range from 87,5 to 108,0 MHz + + + + NRSC-4 + + National Radio Systems Committee +(http://www.nrscstandards.org) + + NTSC-4: United States RBDS Standard + + + + + diff --git a/Documentation/DocBook/v4l/capture.c.xml b/Documentation/DocBook/v4l/capture.c.xml new file mode 100644 index 00000000000..acf46b6dac2 --- /dev/null +++ b/Documentation/DocBook/v4l/capture.c.xml @@ -0,0 +1,659 @@ + +/* + * V4L2 video capture example + * + * This program can be used and distributed without restrictions. + * + * This program were got from V4L2 API, Draft 0.20 + * available at: http://v4l2spec.bytesex.org/ + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include <getopt.h> /* getopt_long() */ + +#include <fcntl.h> /* low-level i/o */ +#include <unistd.h> +#include <errno.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <sys/time.h> +#include <sys/mman.h> +#include <sys/ioctl.h> + +#include <linux/videodev2.h> + +#define CLEAR(x) memset(&(x), 0, sizeof(x)) + +enum io_method { + IO_METHOD_READ, + IO_METHOD_MMAP, + IO_METHOD_USERPTR, +}; + +struct buffer { + void *start; + size_t length; +}; + +static char *dev_name; +static enum io_method io = IO_METHOD_MMAP; +static int fd = -1; +struct buffer *buffers; +static unsigned int n_buffers; +static int out_buf; +static int force_format; +static int frame_count = 70; + +static void errno_exit(const char *s) +{ + fprintf(stderr, "%s error %d, %s\n", s, errno, strerror(errno)); + exit(EXIT_FAILURE); +} + +static int xioctl(int fh, int request, void *arg) +{ + int r; + + do { + r = ioctl(fh, request, arg); + } while (-1 == r && EINTR == errno); + + return r; +} + +static void process_image(const void *p, int size) +{ + if (out_buf) + fwrite(p, size, 1, stdout); + + fflush(stderr); + fprintf(stderr, "."); + fflush(stdout); +} + +static int read_frame(void) +{ + struct v4l2_buffer buf; + unsigned int i; + + switch (io) { + case IO_METHOD_READ: + if (-1 == read(fd, buffers[0].start, buffers[0].length)) { + switch (errno) { + case EAGAIN: + return 0; + + case EIO: + /* Could ignore EIO, see spec. */ + + /* fall through */ + + default: + errno_exit("read"); + } + } + + process_image(buffers[0].start, buffers[0].length); + break; + + case IO_METHOD_MMAP: + CLEAR(buf); + + buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf.memory = V4L2_MEMORY_MMAP; + + if (-1 == xioctl(fd, VIDIOC_DQBUF, &buf)) { + switch (errno) { + case EAGAIN: + return 0; + + case EIO: + /* Could ignore EIO, see spec. */ + + /* fall through */ + + default: + errno_exit("VIDIOC_DQBUF"); + } + } + + assert(buf.index < n_buffers); + + process_image(buffers[buf.index].start, buf.bytesused); + + if (-1 == xioctl(fd, VIDIOC_QBUF, &buf)) + errno_exit("VIDIOC_QBUF"); + break; + + case IO_METHOD_USERPTR: + CLEAR(buf); + + buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf.memory = V4L2_MEMORY_USERPTR; + + if (-1 == xioctl(fd, VIDIOC_DQBUF, &buf)) { + switch (errno) { + case EAGAIN: + return 0; + + case EIO: + /* Could ignore EIO, see spec. */ + + /* fall through */ + + default: + errno_exit("VIDIOC_DQBUF"); + } + } + + for (i = 0; i < n_buffers; ++i) + if (buf.m.userptr == (unsigned long)buffers[i].start + && buf.length == buffers[i].length) + break; + + assert(i < n_buffers); + + process_image((void *)buf.m.userptr, buf.bytesused); + + if (-1 == xioctl(fd, VIDIOC_QBUF, &buf)) + errno_exit("VIDIOC_QBUF"); + break; + } + + return 1; +} + +static void mainloop(void) +{ + unsigned int count; + + count = frame_count; + + while (count-- > 0) { + for (;;) { + fd_set fds; + struct timeval tv; + int r; + + FD_ZERO(&fds); + FD_SET(fd, &fds); + + /* Timeout. */ + tv.tv_sec = 2; + tv.tv_usec = 0; + + r = select(fd + 1, &fds, NULL, NULL, &tv); + + if (-1 == r) { + if (EINTR == errno) + continue; + errno_exit("select"); + } + + if (0 == r) { + fprintf(stderr, "select timeout\n"); + exit(EXIT_FAILURE); + } + + if (read_frame()) + break; + /* EAGAIN - continue select loop. */ + } + } +} + +static void stop_capturing(void) +{ + enum v4l2_buf_type type; + + switch (io) { + case IO_METHOD_READ: + /* Nothing to do. */ + break; + + case IO_METHOD_MMAP: + case IO_METHOD_USERPTR: + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + if (-1 == xioctl(fd, VIDIOC_STREAMOFF, &type)) + errno_exit("VIDIOC_STREAMOFF"); + break; + } +} + +static void start_capturing(void) +{ + unsigned int i; + enum v4l2_buf_type type; + + switch (io) { + case IO_METHOD_READ: + /* Nothing to do. */ + break; + + case IO_METHOD_MMAP: + for (i = 0; i < n_buffers; ++i) { + struct v4l2_buffer buf; + + CLEAR(buf); + buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf.memory = V4L2_MEMORY_MMAP; + buf.index = i; + + if (-1 == xioctl(fd, VIDIOC_QBUF, &buf)) + errno_exit("VIDIOC_QBUF"); + } + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + if (-1 == xioctl(fd, VIDIOC_STREAMON, &type)) + errno_exit("VIDIOC_STREAMON"); + break; + + case IO_METHOD_USERPTR: + for (i = 0; i < n_buffers; ++i) { + struct v4l2_buffer buf; + + CLEAR(buf); + buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf.memory = V4L2_MEMORY_USERPTR; + buf.index = i; + buf.m.userptr = (unsigned long)buffers[i].start; + buf.length = buffers[i].length; + + if (-1 == xioctl(fd, VIDIOC_QBUF, &buf)) + errno_exit("VIDIOC_QBUF"); + } + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + if (-1 == xioctl(fd, VIDIOC_STREAMON, &type)) + errno_exit("VIDIOC_STREAMON"); + break; + } +} + +static void uninit_device(void) +{ + unsigned int i; + + switch (io) { + case IO_METHOD_READ: + free(buffers[0].start); + break; + + case IO_METHOD_MMAP: + for (i = 0; i < n_buffers; ++i) + if (-1 == munmap(buffers[i].start, buffers[i].length)) + errno_exit("munmap"); + break; + + case IO_METHOD_USERPTR: + for (i = 0; i < n_buffers; ++i) + free(buffers[i].start); + break; + } + + free(buffers); +} + +static void init_read(unsigned int buffer_size) +{ + buffers = calloc(1, sizeof(*buffers)); + + if (!buffers) { + fprintf(stderr, "Out of memory\n"); + exit(EXIT_FAILURE); + } + + buffers[0].length = buffer_size; + buffers[0].start = malloc(buffer_size); + + if (!buffers[0].start) { + fprintf(stderr, "Out of memory\n"); + exit(EXIT_FAILURE); + } +} + +static void init_mmap(void) +{ + struct v4l2_requestbuffers req; + + CLEAR(req); + + req.count = 4; + req.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + req.memory = V4L2_MEMORY_MMAP; + + if (-1 == xioctl(fd, VIDIOC_REQBUFS, &req)) { + if (EINVAL == errno) { + fprintf(stderr, "%s does not support " + "memory mapping\n", dev_name); + exit(EXIT_FAILURE); + } else { + errno_exit("VIDIOC_REQBUFS"); + } + } + + if (req.count < 2) { + fprintf(stderr, "Insufficient buffer memory on %s\n", + dev_name); + exit(EXIT_FAILURE); + } + + buffers = calloc(req.count, sizeof(*buffers)); + + if (!buffers) { + fprintf(stderr, "Out of memory\n"); + exit(EXIT_FAILURE); + } + + for (n_buffers = 0; n_buffers < req.count; ++n_buffers) { + struct v4l2_buffer buf; + + CLEAR(buf); + + buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf.memory = V4L2_MEMORY_MMAP; + buf.index = n_buffers; + + if (-1 == xioctl(fd, VIDIOC_QUERYBUF, &buf)) + errno_exit("VIDIOC_QUERYBUF"); + + buffers[n_buffers].length = buf.length; + buffers[n_buffers].start = + mmap(NULL /* start anywhere */, + buf.length, + PROT_READ | PROT_WRITE /* required */, + MAP_SHARED /* recommended */, + fd, buf.m.offset); + + if (MAP_FAILED == buffers[n_buffers].start) + errno_exit("mmap"); + } +} + +static void init_userp(unsigned int buffer_size) +{ + struct v4l2_requestbuffers req; + + CLEAR(req); + + req.count = 4; + req.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + req.memory = V4L2_MEMORY_USERPTR; + + if (-1 == xioctl(fd, VIDIOC_REQBUFS, &req)) { + if (EINVAL == errno) { + fprintf(stderr, "%s does not support " + "user pointer i/o\n", dev_name); + exit(EXIT_FAILURE); + } else { + errno_exit("VIDIOC_REQBUFS"); + } + } + + buffers = calloc(4, sizeof(*buffers)); + + if (!buffers) { + fprintf(stderr, "Out of memory\n"); + exit(EXIT_FAILURE); + } + + for (n_buffers = 0; n_buffers < 4; ++n_buffers) { + buffers[n_buffers].length = buffer_size; + buffers[n_buffers].start = malloc(buffer_size); + + if (!buffers[n_buffers].start) { + fprintf(stderr, "Out of memory\n"); + exit(EXIT_FAILURE); + } + } +} + +static void init_device(void) +{ + struct v4l2_capability cap; + struct v4l2_cropcap cropcap; + struct v4l2_crop crop; + struct v4l2_format fmt; + unsigned int min; + + if (-1 == xioctl(fd, VIDIOC_QUERYCAP, &cap)) { + if (EINVAL == errno) { + fprintf(stderr, "%s is no V4L2 device\n", + dev_name); + exit(EXIT_FAILURE); + } else { + errno_exit("VIDIOC_QUERYCAP"); + } + } + + if (!(cap.capabilities & V4L2_CAP_VIDEO_CAPTURE)) { + fprintf(stderr, "%s is no video capture device\n", + dev_name); + exit(EXIT_FAILURE); + } + + switch (io) { + case IO_METHOD_READ: + if (!(cap.capabilities & V4L2_CAP_READWRITE)) { + fprintf(stderr, "%s does not support read i/o\n", + dev_name); + exit(EXIT_FAILURE); + } + break; + + case IO_METHOD_MMAP: + case IO_METHOD_USERPTR: + if (!(cap.capabilities & V4L2_CAP_STREAMING)) { + fprintf(stderr, "%s does not support streaming i/o\n", + dev_name); + exit(EXIT_FAILURE); + } + break; + } + + + /* Select video input, video standard and tune here. */ + + + CLEAR(cropcap); + + cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + if (0 == xioctl(fd, VIDIOC_CROPCAP, &cropcap)) { + crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + crop.c = cropcap.defrect; /* reset to default */ + + if (-1 == xioctl(fd, VIDIOC_S_CROP, &crop)) { + switch (errno) { + case EINVAL: + /* Cropping not supported. */ + break; + default: + /* Errors ignored. */ + break; + } + } + } else { + /* Errors ignored. */ + } + + + CLEAR(fmt); + + fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + if (force_format) { + fmt.fmt.pix.width = 640; + fmt.fmt.pix.height = 480; + fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; + fmt.fmt.pix.field = V4L2_FIELD_INTERLACED; + + if (-1 == xioctl(fd, VIDIOC_S_FMT, &fmt)) + errno_exit("VIDIOC_S_FMT"); + + /* Note VIDIOC_S_FMT may change width and height. */ + } else { + /* Preserve original settings as set by v4l2-ctl for example */ + if (-1 == xioctl(fd, VIDIOC_G_FMT, &fmt)) + errno_exit("VIDIOC_G_FMT"); + } + + /* Buggy driver paranoia. */ + min = fmt.fmt.pix.width * 2; + if (fmt.fmt.pix.bytesperline < min) + fmt.fmt.pix.bytesperline = min; + min = fmt.fmt.pix.bytesperline * fmt.fmt.pix.height; + if (fmt.fmt.pix.sizeimage < min) + fmt.fmt.pix.sizeimage = min; + + switch (io) { + case IO_METHOD_READ: + init_read(fmt.fmt.pix.sizeimage); + break; + + case IO_METHOD_MMAP: + init_mmap(); + break; + + case IO_METHOD_USERPTR: + init_userp(fmt.fmt.pix.sizeimage); + break; + } +} + +static void close_device(void) +{ + if (-1 == close(fd)) + errno_exit("close"); + + fd = -1; +} + +static void open_device(void) +{ + struct stat st; + + if (-1 == stat(dev_name, &st)) { + fprintf(stderr, "Cannot identify '%s': %d, %s\n", + dev_name, errno, strerror(errno)); + exit(EXIT_FAILURE); + } + + if (!S_ISCHR(st.st_mode)) { + fprintf(stderr, "%s is no device\n", dev_name); + exit(EXIT_FAILURE); + } + + fd = open(dev_name, O_RDWR /* required */ | O_NONBLOCK, 0); + + if (-1 == fd) { + fprintf(stderr, "Cannot open '%s': %d, %s\n", + dev_name, errno, strerror(errno)); + exit(EXIT_FAILURE); + } +} + +static void usage(FILE *fp, int argc, char **argv) +{ + fprintf(fp, + "Usage: %s [options]\n\n" + "Version 1.3\n" + "Options:\n" + "-d | --device name Video device name [%s]\n" + "-h | --help Print this message\n" + "-m | --mmap Use memory mapped buffers [default]\n" + "-r | --read Use read() calls\n" + "-u | --userp Use application allocated buffers\n" + "-o | --output Outputs stream to stdout\n" + "-f | --format Force format to 640x480 YUYV\n" + "-c | --count Number of frames to grab [%i]\n" + "", + argv[0], dev_name, frame_count); +} + +static const char short_options[] = "d:hmruofc:"; + +static const struct option +long_options[] = { + { "device", required_argument, NULL, 'd' }, + { "help", no_argument, NULL, 'h' }, + { "mmap", no_argument, NULL, 'm' }, + { "read", no_argument, NULL, 'r' }, + { "userp", no_argument, NULL, 'u' }, + { "output", no_argument, NULL, 'o' }, + { "format", no_argument, NULL, 'f' }, + { "count", required_argument, NULL, 'c' }, + { 0, 0, 0, 0 } +}; + +int main(int argc, char **argv) +{ + dev_name = "/dev/video0"; + + for (;;) { + int idx; + int c; + + c = getopt_long(argc, argv, + short_options, long_options, &idx); + + if (-1 == c) + break; + + switch (c) { + case 0: /* getopt_long() flag */ + break; + + case 'd': + dev_name = optarg; + break; + + case 'h': + usage(stdout, argc, argv); + exit(EXIT_SUCCESS); + + case 'm': + io = IO_METHOD_MMAP; + break; + + case 'r': + io = IO_METHOD_READ; + break; + + case 'u': + io = IO_METHOD_USERPTR; + break; + + case 'o': + out_buf++; + break; + + case 'f': + force_format++; + break; + + case 'c': + errno = 0; + frame_count = strtol(optarg, NULL, 0); + if (errno) + errno_exit(optarg); + break; + + default: + usage(stderr, argc, argv); + exit(EXIT_FAILURE); + } + } + + open_device(); + init_device(); + start_capturing(); + mainloop(); + stop_capturing(); + uninit_device(); + close_device(); + fprintf(stderr, "\n"); + return 0; +} + diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml new file mode 100644 index 00000000000..dd598ac9a45 --- /dev/null +++ b/Documentation/DocBook/v4l/common.xml @@ -0,0 +1,1169 @@ + Common API Elements + + Programming a V4L2 device consists of these +steps: + + + + Opening the device + + + Changing device properties, selecting a video and audio +input, video standard, picture brightness a. o. + + + Negotiating a data format + + + Negotiating an input/output method + + + The actual input/output loop + + + Closing the device + + + + In practice most steps are optional and can be executed out of +order. It depends on the V4L2 device type, you can read about the +details in . In this chapter we will discuss +the basic concepts applicable to all devices. + +
+ Opening and Closing Devices + +
+ Device Naming + + V4L2 drivers are implemented as kernel modules, loaded +manually by the system administrator or automatically when a device is +first opened. The driver modules plug into the "videodev" kernel +module. It provides helper functions and a common application +interface specified in this document. + + Each driver thus loaded registers one or more device nodes +with major number 81 and a minor number between 0 and 255. Assigning +minor numbers to V4L2 devices is entirely up to the system administrator, +this is primarily intended to solve conflicts between devices. + Access permissions are associated with character +device special files, hence we must ensure device numbers cannot +change with the module load order. To this end minor numbers are no +longer automatically assigned by the "videodev" module as in V4L but +requested by the driver. The defaults will suffice for most people +unless two drivers compete for the same minor numbers. + The module options to select minor numbers are named +after the device special file with a "_nr" suffix. For example "video_nr" +for /dev/video video capture devices. The number is +an offset to the base minor number associated with the device type. + + In earlier versions of the V4L2 API the module options +where named after the device special file with a "unit_" prefix, expressing +the minor number itself, not an offset. Rationale for this change is unknown. +Lastly the naming and semantics are just a convention among driver writers, +the point to note is that minor numbers are not supposed to be hardcoded +into drivers. + When the driver supports multiple devices of the same +type more than one minor number can be assigned, separated by commas: + + +> insmod mydriver.o video_nr=0,1 radio_nr=0,1 + + + In /etc/modules.conf this may be +written as: + +alias char-major-81-0 mydriver +alias char-major-81-1 mydriver +alias char-major-81-64 mydriver +options mydriver video_nr=0,1 radio_nr=0,1 + + + + When an application attempts to open a device +special file with major number 81 and minor number 0, 1, or 64, load +"mydriver" (and the "videodev" module it depends upon). + + + Register the first two video capture devices with +minor number 0 and 1 (base number is 0), the first two radio device +with minor number 64 and 65 (base 64). + + + When no minor number is given as module +option the driver supplies a default. +recommends the base minor numbers to be used for the various device +types. Obviously minor numbers must be unique. When the number is +already in use the offending device will not be +registered. + + By convention system administrators create various +character device special files with these major and minor numbers in +the /dev directory. The names recomended for the +different V4L2 device types are listed in . + + + The creation of character special files (with +mknod) is a privileged operation and +devices cannot be opened by major and minor number. That means +applications cannot reliable scan for loaded or +installed drivers. The user must enter a device name, or the +application can try the conventional device names. + + Under the device filesystem (devfs) the minor number +options are ignored. V4L2 drivers (or by proxy the "videodev" module) +automatically create the required device files in the +/dev/v4l directory using the conventional device +names above. +
+ + + +
+ Multiple Opens + + In general, V4L2 devices can be opened more than once. +When this is supported by the driver, users can for example start a +"panel" application to change controls like brightness or audio +volume, while another application captures video and audio. In other words, panel +applications are comparable to an OSS or ALSA audio mixer application. +When a device supports multiple functions like capturing and overlay +simultaneously, multiple opens allow concurrent +use of the device by forked processes or specialized applications. + + Multiple opens are optional, although drivers should +permit at least concurrent accesses without data exchange, &ie; panel +applications. This implies &func-open; can return an &EBUSY; when the +device is already in use, as well as &func-ioctl; functions initiating +data exchange (namely the &VIDIOC-S-FMT; ioctl), and the &func-read; +and &func-write; functions. + + Mere opening a V4L2 device does not grant exclusive +access. + Drivers could recognize the +O_EXCL open flag. Presently this is not required, +so applications cannot know if it really works. + Initiating data exchange however assigns the right +to read or write the requested type of data, and to change related +properties, to this file descriptor. Applications can request +additional access privileges using the priority mechanism described in +. +
+ +
+ Shared Data Streams + + V4L2 drivers should not support multiple applications +reading or writing the same data stream on a device by copying +buffers, time multiplexing or similar means. This is better handled by +a proxy application in user space. When the driver supports stream +sharing anyway it must be implemented transparently. The V4L2 API does +not specify how conflicts are solved. +
+ +
+ Functions + + To open and close V4L2 devices applications use the +&func-open; and &func-close; function, respectively. Devices are +programmed using the &func-ioctl; function as explained in the +following sections. +
+
+ +
+ Querying Capabilities + + Because V4L2 covers a wide variety of devices not all +aspects of the API are equally applicable to all types of devices. +Furthermore devices of the same type have different capabilities and +this specification permits the omission of a few complicated and less +important parts of the API. + + The &VIDIOC-QUERYCAP; ioctl is available to check if the kernel +device is compatible with this specification, and to query the functions and I/O +methods supported by the device. Other features can be queried +by calling the respective ioctl, for example &VIDIOC-ENUMINPUT; +to learn about the number, types and names of video connectors on the +device. Although abstraction is a major objective of this API, the +ioctl also allows driver specific applications to reliable identify +the driver. + + All V4L2 drivers must support +VIDIOC_QUERYCAP. Applications should always call +this ioctl after opening the device. +
+ +
+ Application Priority + + When multiple applications share a device it may be +desirable to assign them different priorities. Contrary to the +traditional "rm -rf /" school of thought a video recording application +could for example block other applications from changing video +controls or switching the current TV channel. Another objective is to +permit low priority applications working in background, which can be +preempted by user controlled applications and automatically regain +control of the device at a later time. + + Since these features cannot be implemented entirely in user +space V4L2 defines the &VIDIOC-G-PRIORITY; and &VIDIOC-S-PRIORITY; +ioctls to request and query the access priority associate with a file +descriptor. Opening a device assigns a medium priority, compatible +with earlier versions of V4L2 and drivers not supporting these ioctls. +Applications requiring a different priority will usually call +VIDIOC_S_PRIORITY after verifying the device with +the &VIDIOC-QUERYCAP; ioctl. + + Ioctls changing driver properties, such as &VIDIOC-S-INPUT;, +return an &EBUSY; after another application obtained higher priority. +An event mechanism to notify applications about asynchronous property +changes has been proposed but not added yet. +
+ +
+ Video Inputs and Outputs + + Video inputs and outputs are physical connectors of a +device. These can be for example RF connectors (antenna/cable), CVBS +a.k.a. Composite Video, S-Video or RGB connectors. Only video and VBI +capture devices have inputs, output devices have outputs, at least one +each. Radio devices have no video inputs or outputs. + + To learn about the number and attributes of the +available inputs and outputs applications can enumerate them with the +&VIDIOC-ENUMINPUT; and &VIDIOC-ENUMOUTPUT; ioctl, respectively. The +&v4l2-input; returned by the VIDIOC_ENUMINPUT +ioctl also contains signal status information applicable when the +current video input is queried. + + The &VIDIOC-G-INPUT; and &VIDIOC-G-OUTPUT; ioctl return the +index of the current video input or output. To select a different +input or output applications call the &VIDIOC-S-INPUT; and +&VIDIOC-S-OUTPUT; ioctl. Drivers must implement all the input ioctls +when the device has one or more inputs, all the output ioctls when the +device has one or more outputs. + + + + + Information about the current video input + + +&v4l2-input; input; +int index; + +if (-1 == ioctl (fd, &VIDIOC-G-INPUT;, &index)) { + perror ("VIDIOC_G_INPUT"); + exit (EXIT_FAILURE); +} + +memset (&input, 0, sizeof (input)); +input.index = index; + +if (-1 == ioctl (fd, &VIDIOC-ENUMINPUT;, &input)) { + perror ("VIDIOC_ENUMINPUT"); + exit (EXIT_FAILURE); +} + +printf ("Current input: %s\n", input.name); + + + + + Switching to the first video input + + +int index; + +index = 0; + +if (-1 == ioctl (fd, &VIDIOC-S-INPUT;, &index)) { + perror ("VIDIOC_S_INPUT"); + exit (EXIT_FAILURE); +} + + +
+ +
+ Audio Inputs and Outputs + + Audio inputs and outputs are physical connectors of a +device. Video capture devices have inputs, output devices have +outputs, zero or more each. Radio devices have no audio inputs or +outputs. They have exactly one tuner which in fact +is an audio source, but this API associates +tuners with video inputs or outputs only, and radio devices have +none of these. + Actually &v4l2-audio; ought to have a +tuner field like &v4l2-input;, not only +making the API more consistent but also permitting radio devices with +multiple tuners. + A connector on a TV card to loop back the received +audio signal to a sound card is not considered an audio output. + + Audio and video inputs and outputs are associated. Selecting +a video source also selects an audio source. This is most evident when +the video and audio source is a tuner. Further audio connectors can +combine with more than one video input or output. Assumed two +composite video inputs and two audio inputs exist, there may be up to +four valid combinations. The relation of video and audio connectors +is defined in the audioset field of the +respective &v4l2-input; or &v4l2-output;, where each bit represents +the index number, starting at zero, of one audio input or output. + + To learn about the number and attributes of the +available inputs and outputs applications can enumerate them with the +&VIDIOC-ENUMAUDIO; and &VIDIOC-ENUMAUDOUT; ioctl, respectively. The +&v4l2-audio; returned by the VIDIOC_ENUMAUDIO ioctl +also contains signal status information applicable when the current +audio input is queried. + + The &VIDIOC-G-AUDIO; and &VIDIOC-G-AUDOUT; ioctl report +the current audio input and output, respectively. Note that, unlike +&VIDIOC-G-INPUT; and &VIDIOC-G-OUTPUT; these ioctls return a structure +as VIDIOC_ENUMAUDIO and +VIDIOC_ENUMAUDOUT do, not just an index. + + To select an audio input and change its properties +applications call the &VIDIOC-S-AUDIO; ioctl. To select an audio +output (which presently has no changeable properties) applications +call the &VIDIOC-S-AUDOUT; ioctl. + + Drivers must implement all input ioctls when the device +has one or more inputs, all output ioctls when the device has one +or more outputs. When the device has any audio inputs or outputs the +driver must set the V4L2_CAP_AUDIO flag in the +&v4l2-capability; returned by the &VIDIOC-QUERYCAP; ioctl. + + + Information about the current audio input + + +&v4l2-audio; audio; + +memset (&audio, 0, sizeof (audio)); + +if (-1 == ioctl (fd, &VIDIOC-G-AUDIO;, &audio)) { + perror ("VIDIOC_G_AUDIO"); + exit (EXIT_FAILURE); +} + +printf ("Current input: %s\n", audio.name); + + + + + Switching to the first audio input + + +&v4l2-audio; audio; + +memset (&audio, 0, sizeof (audio)); /* clear audio.mode, audio.reserved */ + +audio.index = 0; + +if (-1 == ioctl (fd, &VIDIOC-S-AUDIO;, &audio)) { + perror ("VIDIOC_S_AUDIO"); + exit (EXIT_FAILURE); +} + + +
+ +
+ Tuners and Modulators + +
+ Tuners + + Video input devices can have one or more tuners +demodulating a RF signal. Each tuner is associated with one or more +video inputs, depending on the number of RF connectors on the tuner. +The type field of the respective +&v4l2-input; returned by the &VIDIOC-ENUMINPUT; ioctl is set to +V4L2_INPUT_TYPE_TUNER and its +tuner field contains the index number of +the tuner. + + Radio devices have exactly one tuner with index zero, no +video inputs. + + To query and change tuner properties applications use the +&VIDIOC-G-TUNER; and &VIDIOC-S-TUNER; ioctl, respectively. The +&v4l2-tuner; returned by VIDIOC_G_TUNER also +contains signal status information applicable when the tuner of the +current video input, or a radio tuner is queried. Note that +VIDIOC_S_TUNER does not switch the current tuner, +when there is more than one at all. The tuner is solely determined by +the current video input. Drivers must support both ioctls and set the +V4L2_CAP_TUNER flag in the &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl when the device has one or +more tuners. +
+ +
+ Modulators + + Video output devices can have one or more modulators, uh, +modulating a video signal for radiation or connection to the antenna +input of a TV set or video recorder. Each modulator is associated with +one or more video outputs, depending on the number of RF connectors on +the modulator. The type field of the +respective &v4l2-output; returned by the &VIDIOC-ENUMOUTPUT; ioctl is +set to V4L2_OUTPUT_TYPE_MODULATOR and its +modulator field contains the index number +of the modulator. This specification does not define radio output +devices. + + To query and change modulator properties applications use +the &VIDIOC-G-MODULATOR; and &VIDIOC-S-MODULATOR; ioctl. Note that +VIDIOC_S_MODULATOR does not switch the current +modulator, when there is more than one at all. The modulator is solely +determined by the current video output. Drivers must support both +ioctls and set the V4L2_CAP_MODULATOR flag in +the &v4l2-capability; returned by the &VIDIOC-QUERYCAP; ioctl when the +device has one or more modulators. +
+ +
+ Radio Frequency + + To get and set the tuner or modulator radio frequency +applications use the &VIDIOC-G-FREQUENCY; and &VIDIOC-S-FREQUENCY; +ioctl which both take a pointer to a &v4l2-frequency;. These ioctls +are used for TV and radio devices alike. Drivers must support both +ioctls when the tuner or modulator ioctls are supported, or +when the device is a radio device. +
+ +
+ Satellite Receivers + + To be discussed. See also +proposals by Peter Schlaf, video4linux-list@redhat.com on 23 Oct 2002, +subject: "Re: [V4L] Re: v4l2 api". +
+
+ +
+ Video Standards + + Video devices typically support one or more different video +standards or variations of standards. Each video input and output may +support another set of standards. This set is reported by the +std field of &v4l2-input; and +&v4l2-output; returned by the &VIDIOC-ENUMINPUT; and +&VIDIOC-ENUMOUTPUT; ioctl, respectively. + + V4L2 defines one bit for each analog video standard +currently in use worldwide, and sets aside bits for driver defined +standards, ⪚ hybrid standards to watch NTSC video tapes on PAL TVs +and vice versa. Applications can use the predefined bits to select a +particular standard, although presenting the user a menu of supported +standards is preferred. To enumerate and query the attributes of the +supported standards applications use the &VIDIOC-ENUMSTD; ioctl. + + Many of the defined standards are actually just variations +of a few major standards. The hardware may in fact not distinguish +between them, or do so internal and switch automatically. Therefore +enumerated standards also contain sets of one or more standard +bits. + + Assume a hypothetic tuner capable of demodulating B/PAL, +G/PAL and I/PAL signals. The first enumerated standard is a set of B +and G/PAL, switched automatically depending on the selected radio +frequency in UHF or VHF band. Enumeration gives a "PAL-B/G" or "PAL-I" +choice. Similar a Composite input may collapse standards, enumerating +"PAL-B/G/H/I", "NTSC-M" and "SECAM-D/K". + Some users are already confused by technical terms PAL, +NTSC and SECAM. There is no point asking them to distinguish between +B, G, D, or K when the software or hardware can do that +automatically. + + + To query and select the standard used by the current video +input or output applications call the &VIDIOC-G-STD; and +&VIDIOC-S-STD; ioctl, respectively. The received +standard can be sensed with the &VIDIOC-QUERYSTD; ioctl. Note parameter of all these ioctls is a pointer to a &v4l2-std-id; type (a standard set), not an index into the standard enumeration. + An alternative to the current scheme is to use pointers +to indices as arguments of VIDIOC_G_STD and +VIDIOC_S_STD, the &v4l2-input; and +&v4l2-output; std field would be a set of +indices like audioset. + Indices are consistent with the rest of the API +and identify the standard unambiguously. In the present scheme of +things an enumerated standard is looked up by &v4l2-std-id;. Now the +standards supported by the inputs of a device can overlap. Just +assume the tuner and composite input in the example above both +exist on a device. An enumeration of "PAL-B/G", "PAL-H/I" suggests +a choice which does not exist. We cannot merge or omit sets, because +applications would be unable to find the standards reported by +VIDIOC_G_STD. That leaves separate enumerations +for each input. Also selecting a standard by &v4l2-std-id; can be +ambiguous. Advantage of this method is that applications need not +identify the standard indirectly, after enumerating.So in +summary, the lookup itself is unavoidable. The difference is only +whether the lookup is necessary to find an enumerated standard or to +switch to a standard by &v4l2-std-id;. + Drivers must implement all video standard ioctls +when the device has one or more video inputs or outputs. + + Special rules apply to USB cameras where the notion of video +standards makes little sense. More generally any capture device, +output devices accordingly, which is + + incapable of capturing fields or frames at the nominal +rate of the video standard, or + + + where timestamps refer +to the instant the field or frame was received by the driver, not the +capture time, or + + + where sequence numbers +refer to the frames received by the driver, not the captured +frames. + + Here the driver shall set the +std field of &v4l2-input; and &v4l2-output; +to zero, the VIDIOC_G_STD, +VIDIOC_S_STD, +VIDIOC_QUERYSTD and +VIDIOC_ENUMSTD ioctls shall return the +&EINVAL;. + See for a rationale. Probably +even USB cameras follow some well known video standard. It might have +been better to explicitly indicate elsewhere if a device cannot live +up to normal expectations, instead of this exception. + + + + Information about the current video standard + + +&v4l2-std-id; std_id; +&v4l2-standard; standard; + +if (-1 == ioctl (fd, &VIDIOC-G-STD;, &std_id)) { + /* Note when VIDIOC_ENUMSTD always returns EINVAL this + is no video device or it falls under the USB exception, + and VIDIOC_G_STD returning EINVAL is no error. */ + + perror ("VIDIOC_G_STD"); + exit (EXIT_FAILURE); +} + +memset (&standard, 0, sizeof (standard)); +standard.index = 0; + +while (0 == ioctl (fd, &VIDIOC-ENUMSTD;, &standard)) { + if (standard.id & std_id) { + printf ("Current video standard: %s\n", standard.name); + exit (EXIT_SUCCESS); + } + + standard.index++; +} + +/* EINVAL indicates the end of the enumeration, which cannot be + empty unless this device falls under the USB exception. */ + +if (errno == EINVAL || standard.index == 0) { + perror ("VIDIOC_ENUMSTD"); + exit (EXIT_FAILURE); +} + + + + + Listing the video standards supported by the current +input + + +&v4l2-input; input; +&v4l2-standard; standard; + +memset (&input, 0, sizeof (input)); + +if (-1 == ioctl (fd, &VIDIOC-G-INPUT;, &input.index)) { + perror ("VIDIOC_G_INPUT"); + exit (EXIT_FAILURE); +} + +if (-1 == ioctl (fd, &VIDIOC-ENUMINPUT;, &input)) { + perror ("VIDIOC_ENUM_INPUT"); + exit (EXIT_FAILURE); +} + +printf ("Current input %s supports:\n", input.name); + +memset (&standard, 0, sizeof (standard)); +standard.index = 0; + +while (0 == ioctl (fd, &VIDIOC-ENUMSTD;, &standard)) { + if (standard.id & input.std) + printf ("%s\n", standard.name); + + standard.index++; +} + +/* EINVAL indicates the end of the enumeration, which cannot be + empty unless this device falls under the USB exception. */ + +if (errno != EINVAL || standard.index == 0) { + perror ("VIDIOC_ENUMSTD"); + exit (EXIT_FAILURE); +} + + + + + Selecting a new video standard + + +&v4l2-input; input; +&v4l2-std-id; std_id; + +memset (&input, 0, sizeof (input)); + +if (-1 == ioctl (fd, &VIDIOC-G-INPUT;, &input.index)) { + perror ("VIDIOC_G_INPUT"); + exit (EXIT_FAILURE); +} + +if (-1 == ioctl (fd, &VIDIOC-ENUMINPUT;, &input)) { + perror ("VIDIOC_ENUM_INPUT"); + exit (EXIT_FAILURE); +} + +if (0 == (input.std & V4L2_STD_PAL_BG)) { + fprintf (stderr, "Oops. B/G PAL is not supported.\n"); + exit (EXIT_FAILURE); +} + +/* Note this is also supposed to work when only B + or G/PAL is supported. */ + +std_id = V4L2_STD_PAL_BG; + +if (-1 == ioctl (fd, &VIDIOC-S-STD;, &std_id)) { + perror ("VIDIOC_S_STD"); + exit (EXIT_FAILURE); +} + + +
+ + &sub-controls; + +
+ Data Formats + +
+ Data Format Negotiation + + Different devices exchange different kinds of data with +applications, for example video images, raw or sliced VBI data, RDS +datagrams. Even within one kind many different formats are possible, +in particular an abundance of image formats. Although drivers must +provide a default and the selection persists across closing and +reopening a device, applications should always negotiate a data format +before engaging in data exchange. Negotiation means the application +asks for a particular format and the driver selects and reports the +best the hardware can do to satisfy the request. Of course +applications can also just query the current selection. + + A single mechanism exists to negotiate all data formats +using the aggregate &v4l2-format; and the &VIDIOC-G-FMT; and +&VIDIOC-S-FMT; ioctls. Additionally the &VIDIOC-TRY-FMT; ioctl can be +used to examine what the hardware could do, +without actually selecting a new data format. The data formats +supported by the V4L2 API are covered in the respective device section +in . For a closer look at image formats see +. + + The VIDIOC_S_FMT ioctl is a major +turning-point in the initialization sequence. Prior to this point +multiple panel applications can access the same device concurrently to +select the current input, change controls or modify other properties. +The first VIDIOC_S_FMT assigns a logical stream +(video data, VBI data etc.) exclusively to one file descriptor. + + Exclusive means no other application, more precisely no +other file descriptor, can grab this stream or change device +properties inconsistent with the negotiated parameters. A video +standard change for example, when the new standard uses a different +number of scan lines, can invalidate the selected image format. +Therefore only the file descriptor owning the stream can make +invalidating changes. Accordingly multiple file descriptors which +grabbed different logical streams prevent each other from interfering +with their settings. When for example video overlay is about to start +or already in progress, simultaneous video capturing may be restricted +to the same cropping and image size. + + When applications omit the +VIDIOC_S_FMT ioctl its locking side effects are +implied by the next step, the selection of an I/O method with the +&VIDIOC-REQBUFS; ioctl or implicit with the first &func-read; or +&func-write; call. + + Generally only one logical stream can be assigned to a +file descriptor, the exception being drivers permitting simultaneous +video capturing and overlay using the same file descriptor for +compatibility with V4L and earlier versions of V4L2. Switching the +logical stream or returning into "panel mode" is possible by closing +and reopening the device. Drivers may support a +switch using VIDIOC_S_FMT. + + All drivers exchanging data with +applications must support the VIDIOC_G_FMT and +VIDIOC_S_FMT ioctl. Implementation of the +VIDIOC_TRY_FMT is highly recommended but +optional. +
+ +
+ Image Format Enumeration + + Apart of the generic format negotiation functions +a special ioctl to enumerate all image formats supported by video +capture, overlay or output devices is available. + Enumerating formats an application has no a-priori +knowledge of (otherwise it could explicitely ask for them and need not +enumerate) seems useless, but there are applications serving as proxy +between drivers and the actual video applications for which this is +useful. + + + The &VIDIOC-ENUM-FMT; ioctl must be supported +by all drivers exchanging image data with applications. + + + Drivers are not supposed to convert image formats in +kernel space. They must enumerate only formats directly supported by +the hardware. If necessary driver writers should publish an example +conversion routine or library for integration into applications. + +
+
+ +
+ Image Cropping, Insertion and Scaling + + Some video capture devices can sample a subsection of the +picture and shrink or enlarge it to an image of arbitrary size. We +call these abilities cropping and scaling. Some video output devices +can scale an image up or down and insert it at an arbitrary scan line +and horizontal offset into a video signal. + + Applications can use the following API to select an area in +the video signal, query the default area and the hardware limits. +Despite their name, the &VIDIOC-CROPCAP;, &VIDIOC-G-CROP; +and &VIDIOC-S-CROP; ioctls apply to input as well as output +devices. + + Scaling requires a source and a target. On a video capture +or overlay device the source is the video signal, and the cropping +ioctls determine the area actually sampled. The target are images +read by the application or overlaid onto the graphics screen. Their +size (and position for an overlay) is negotiated with the +&VIDIOC-G-FMT; and &VIDIOC-S-FMT; ioctls. + + On a video output device the source are the images passed in +by the application, and their size is again negotiated with the +VIDIOC_G/S_FMT ioctls, or may be encoded in a +compressed video stream. The target is the video signal, and the +cropping ioctls determine the area where the images are +inserted. + + Source and target rectangles are defined even if the device +does not support scaling or the VIDIOC_G/S_CROP +ioctls. Their size (and position where applicable) will be fixed in +this case. All capture and output device must support the +VIDIOC_CROPCAP ioctl such that applications can +determine if scaling takes place. + +
+ Cropping Structures + +
+ Image Cropping, Insertion and Scaling + + + + + + + + + The cropping, insertion and scaling process + + +
+ + For capture devices the coordinates of the top left +corner, width and height of the area which can be sampled is given by +the bounds substructure of the +&v4l2-cropcap; returned by the VIDIOC_CROPCAP +ioctl. To support a wide range of hardware this specification does not +define an origin or units. However by convention drivers should +horizontally count unscaled samples relative to 0H (the leading edge +of the horizontal sync pulse, see ). +Vertically ITU-R line +numbers of the first field (, ), multiplied by two if the driver can capture both +fields. + + The top left corner, width and height of the source +rectangle, that is the area actually sampled, is given by &v4l2-crop; +using the same coordinate system as &v4l2-cropcap;. Applications can +use the VIDIOC_G_CROP and +VIDIOC_S_CROP ioctls to get and set this +rectangle. It must lie completely within the capture boundaries and +the driver may further adjust the requested size and/or position +according to hardware limitations. + + Each capture device has a default source rectangle, given +by the defrect substructure of +&v4l2-cropcap;. The center of this rectangle shall align with the +center of the active picture area of the video signal, and cover what +the driver writer considers the complete picture. Drivers shall reset +the source rectangle to the default when the driver is first loaded, +but not later. + + For output devices these structures and ioctls are used +accordingly, defining the target rectangle where +the images will be inserted into the video signal. + +
+ +
+ Scaling Adjustments + + Video hardware can have various cropping, insertion and +scaling limitations. It may only scale up or down, support only +discrete scaling factors, or have different scaling abilities in +horizontal and vertical direction. Also it may not support scaling at +all. At the same time the &v4l2-crop; rectangle may have to be +aligned, and both the source and target rectangles may have arbitrary +upper and lower size limits. In particular the maximum +width and height +in &v4l2-crop; may be smaller than the +&v4l2-cropcap;.bounds area. Therefore, as +usual, drivers are expected to adjust the requested parameters and +return the actual values selected. + + Applications can change the source or the target rectangle +first, as they may prefer a particular image size or a certain area in +the video signal. If the driver has to adjust both to satisfy hardware +limitations, the last requested rectangle shall take priority, and the +driver should preferably adjust the opposite one. The &VIDIOC-TRY-FMT; +ioctl however shall not change the driver state and therefore only +adjust the requested rectangle. + + Suppose scaling on a video capture device is restricted to +a factor 1:1 or 2:1 in either direction and the target image size must +be a multiple of 16 × 16 pixels. The source cropping +rectangle is set to defaults, which are also the upper limit in this +example, of 640 × 400 pixels at offset 0, 0. An +application requests an image size of 300 × 225 +pixels, assuming video will be scaled down from the "full picture" +accordingly. The driver sets the image size to the closest possible +values 304 × 224, then chooses the cropping rectangle +closest to the requested size, that is 608 × 224 +(224 × 2:1 would exceed the limit 400). The offset +0, 0 is still valid, thus unmodified. Given the default cropping +rectangle reported by VIDIOC_CROPCAP the +application can easily propose another offset to center the cropping +rectangle. + + Now the application may insist on covering an area using a +picture aspect ratio closer to the original request, so it asks for a +cropping rectangle of 608 × 456 pixels. The present +scaling factors limit cropping to 640 × 384, so the +driver returns the cropping size 608 × 384 and adjusts +the image size to closest possible 304 × 192. + +
+ +
+ Examples + + Source and target rectangles shall remain unchanged across +closing and reopening a device, such that piping data into or out of a +device will work without special preparations. More advanced +applications should ensure the parameters are suitable before starting +I/O. + + + Resetting the cropping parameters + + (A video capture device is assumed; change +V4L2_BUF_TYPE_VIDEO_CAPTURE for other +devices.) + + +&v4l2-cropcap; cropcap; +&v4l2-crop; crop; + +memset (&cropcap, 0, sizeof (cropcap)); +cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + +if (-1 == ioctl (fd, &VIDIOC-CROPCAP;, &cropcap)) { + perror ("VIDIOC_CROPCAP"); + exit (EXIT_FAILURE); +} + +memset (&crop, 0, sizeof (crop)); +crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; +crop.c = cropcap.defrect; + +/* Ignore if cropping is not supported (EINVAL). */ + +if (-1 == ioctl (fd, &VIDIOC-S-CROP;, &crop) + && errno != EINVAL) { + perror ("VIDIOC_S_CROP"); + exit (EXIT_FAILURE); +} + + + + + Simple downscaling + + (A video capture device is assumed.) + + +&v4l2-cropcap; cropcap; +&v4l2-format; format; + +reset_cropping_parameters (); + +/* Scale down to 1/4 size of full picture. */ + +memset (&format, 0, sizeof (format)); /* defaults */ + +format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + +format.fmt.pix.width = cropcap.defrect.width >> 1; +format.fmt.pix.height = cropcap.defrect.height >> 1; +format.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; + +if (-1 == ioctl (fd, &VIDIOC-S-FMT;, &format)) { + perror ("VIDIOC_S_FORMAT"); + exit (EXIT_FAILURE); +} + +/* We could check the actual image size now, the actual scaling factor + or if the driver can scale at all. */ + + + + + Selecting an output area + + +&v4l2-cropcap; cropcap; +&v4l2-crop; crop; + +memset (&cropcap, 0, sizeof (cropcap)); +cropcap.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + +if (-1 == ioctl (fd, VIDIOC_CROPCAP;, &cropcap)) { + perror ("VIDIOC_CROPCAP"); + exit (EXIT_FAILURE); +} + +memset (&crop, 0, sizeof (crop)); + +crop.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; +crop.c = cropcap.defrect; + +/* Scale the width and height to 50 % of their original size + and center the output. */ + +crop.c.width /= 2; +crop.c.height /= 2; +crop.c.left += crop.c.width / 2; +crop.c.top += crop.c.height / 2; + +/* Ignore if cropping is not supported (EINVAL). */ + +if (-1 == ioctl (fd, VIDIOC_S_CROP, &crop) + && errno != EINVAL) { + perror ("VIDIOC_S_CROP"); + exit (EXIT_FAILURE); +} + + + + + Current scaling factor and pixel aspect + + (A video capture device is assumed.) + + +&v4l2-cropcap; cropcap; +&v4l2-crop; crop; +&v4l2-format; format; +double hscale, vscale; +double aspect; +int dwidth, dheight; + +memset (&cropcap, 0, sizeof (cropcap)); +cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + +if (-1 == ioctl (fd, &VIDIOC-CROPCAP;, &cropcap)) { + perror ("VIDIOC_CROPCAP"); + exit (EXIT_FAILURE); +} + +memset (&crop, 0, sizeof (crop)); +crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + +if (-1 == ioctl (fd, &VIDIOC-G-CROP;, &crop)) { + if (errno != EINVAL) { + perror ("VIDIOC_G_CROP"); + exit (EXIT_FAILURE); + } + + /* Cropping not supported. */ + crop.c = cropcap.defrect; +} + +memset (&format, 0, sizeof (format)); +format.fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + +if (-1 == ioctl (fd, &VIDIOC-G-FMT;, &format)) { + perror ("VIDIOC_G_FMT"); + exit (EXIT_FAILURE); +} + +/* The scaling applied by the driver. */ + +hscale = format.fmt.pix.width / (double) crop.c.width; +vscale = format.fmt.pix.height / (double) crop.c.height; + +aspect = cropcap.pixelaspect.numerator / + (double) cropcap.pixelaspect.denominator; +aspect = aspect * hscale / vscale; + +/* Devices following ITU-R BT.601 do not capture + square pixels. For playback on a computer monitor + we should scale the images to this size. */ + +dwidth = format.fmt.pix.width / aspect; +dheight = format.fmt.pix.height; + + +
+
+ +
+ Streaming Parameters + + Streaming parameters are intended to optimize the video +capture process as well as I/O. Presently applications can request a +high quality capture mode with the &VIDIOC-S-PARM; ioctl. + + The current video standard determines a nominal number of +frames per second. If less than this number of frames is to be +captured or output, applications can request frame skipping or +duplicating on the driver side. This is especially useful when using +the &func-read; or &func-write;, which are not augmented by timestamps +or sequence counters, and to avoid unneccessary data copying. + + Finally these ioctls can be used to determine the number of +buffers used internally by a driver in read/write mode. For +implications see the section discussing the &func-read; +function. + + To get and set the streaming parameters applications call +the &VIDIOC-G-PARM; and &VIDIOC-S-PARM; ioctl, respectively. They take +a pointer to a &v4l2-streamparm;, which contains a union holding +separate parameters for input and output devices. + + These ioctls are optional, drivers need not implement +them. If so, they return the &EINVAL;. +
+ + diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/v4l/compat.xml new file mode 100644 index 00000000000..4d1902a54d6 --- /dev/null +++ b/Documentation/DocBook/v4l/compat.xml @@ -0,0 +1,2457 @@ + Changes + + The following chapters document the evolution of the V4L2 API, +errata or extensions. They are also intended to help application and +driver writers to port or update their code. + +
+ Differences between V4L and V4L2 + + The Video For Linux API was first introduced in Linux 2.1 to +unify and replace various TV and radio device related interfaces, +developed independently by driver writers in prior years. Starting +with Linux 2.5 the much improved V4L2 API replaces the V4L API, +although existing drivers will continue to support V4L applications in +the future, either directly or through the V4L2 compatibility layer in +the videodev kernel module translating ioctls on +the fly. For a transition period not all drivers will support the V4L2 +API. + +
+ Opening and Closing Devices + + For compatibility reasons the character device file names +recommended for V4L2 video capture, overlay, radio, teletext and raw +vbi capture devices did not change from those used by V4L. They are +listed in and below in . + + The V4L videodev module automatically +assigns minor numbers to drivers in load order, depending on the +registered device type. We recommend that V4L2 drivers by default +register devices with the same numbers, but the system administrator +can assign arbitrary minor numbers using driver module options. The +major device number remains 81. + + + V4L Device Types, Names and Numbers + + + + Device Type + File Name + Minor Numbers + + + + + Video capture and overlay + /dev/video and +/dev/bttv0 According to +Documentation/devices.txt these should be symbolic links to +/dev/video0. Note the original bttv interface is +not compatible with V4L or V4L2. , +/dev/video0 to +/dev/video63 + 0-63 + + + Radio receiver + /dev/radio + According to +Documentation/devices.txt a symbolic link to +/dev/radio0. + , /dev/radio0 to +/dev/radio63 + 64-127 + + + Teletext decoder + /dev/vtx, +/dev/vtx0 to +/dev/vtx31 + 192-223 + + + Raw VBI capture + /dev/vbi, +/dev/vbi0 to +/dev/vbi31 + 224-255 + + + +
+ + V4L prohibits (or used to prohibit) multiple opens of a +device file. V4L2 drivers may support multiple +opens, see for details and consequences. + + V4L drivers respond to V4L2 ioctls with an &EINVAL;. The +compatibility layer in the V4L2 videodev module +can translate V4L ioctl requests to their V4L2 counterpart, however a +V4L2 driver usually needs more preparation to become fully V4L +compatible. This is covered in more detail in . +
+ +
+ Querying Capabilities + + The V4L VIDIOCGCAP ioctl is +equivalent to V4L2's &VIDIOC-QUERYCAP;. + + The name field in struct +video_capability became +card in &v4l2-capability;, +type was replaced by +capabilities. Note V4L2 does not +distinguish between device types like this, better think of basic +video input, video output and radio devices supporting a set of +related functions like video capturing, video overlay and VBI +capturing. See for an +introduction. + + + + struct +video_capability +type + &v4l2-capability; +capabilities flags + Purpose + + + + + VID_TYPE_CAPTURE + V4L2_CAP_VIDEO_CAPTURE + The video +capture interface is supported. + + + VID_TYPE_TUNER + V4L2_CAP_TUNER + The device has a tuner or +modulator. + + + VID_TYPE_TELETEXT + V4L2_CAP_VBI_CAPTURE + The raw VBI +capture interface is supported. + + + VID_TYPE_OVERLAY + V4L2_CAP_VIDEO_OVERLAY + The video +overlay interface is supported. + + + VID_TYPE_CHROMAKEY + V4L2_FBUF_CAP_CHROMAKEY in +field capability of +&v4l2-framebuffer; + Whether chromakey overlay is supported. For +more information on overlay see +. + + + VID_TYPE_CLIPPING + V4L2_FBUF_CAP_LIST_CLIPPING +and V4L2_FBUF_CAP_BITMAP_CLIPPING in field +capability of &v4l2-framebuffer; + Whether clipping the overlaid image is +supported, see . + + + VID_TYPE_FRAMERAM + V4L2_FBUF_CAP_EXTERNOVERLAY +not set in field +capability of &v4l2-framebuffer; + Whether overlay overwrites frame buffer memory, +see . + + + VID_TYPE_SCALES + - + This flag indicates if the hardware can scale +images. The V4L2 API implies the scale factor by setting the cropping +dimensions and image size with the &VIDIOC-S-CROP; and &VIDIOC-S-FMT; +ioctl, respectively. The driver returns the closest sizes possible. +For more information on cropping and scaling see . + + + VID_TYPE_MONOCHROME + - + Applications can enumerate the supported image +formats with the &VIDIOC-ENUM-FMT; ioctl to determine if the device +supports grey scale capturing only. For more information on image +formats see . + + + VID_TYPE_SUBCAPTURE + - + Applications can call the &VIDIOC-G-CROP; ioctl +to determine if the device supports capturing a subsection of the full +picture ("cropping" in V4L2). If not, the ioctl returns the &EINVAL;. +For more information on cropping and scaling see . + + + VID_TYPE_MPEG_DECODER + - + Applications can enumerate the supported image +formats with the &VIDIOC-ENUM-FMT; ioctl to determine if the device +supports MPEG streams. + + + VID_TYPE_MPEG_ENCODER + - + See above. + + + VID_TYPE_MJPEG_DECODER + - + See above. + + + VID_TYPE_MJPEG_ENCODER + - + See above. + + + + + + The audios field was replaced +by capabilities flag +V4L2_CAP_AUDIO, indicating +if the device has any audio inputs or outputs. To +determine their number applications can enumerate audio inputs with +the &VIDIOC-G-AUDIO; ioctl. The audio ioctls are described in . + + The maxwidth, +maxheight, +minwidth and +minheight fields were removed. Calling the +&VIDIOC-S-FMT; or &VIDIOC-TRY-FMT; ioctl with the desired dimensions +returns the closest size possible, taking into account the current +video standard, cropping and scaling limitations. +
+ +
+ Video Sources + + V4L provides the VIDIOCGCHAN and +VIDIOCSCHAN ioctl using struct +video_channel to enumerate +the video inputs of a V4L device. The equivalent V4L2 ioctls +are &VIDIOC-ENUMINPUT;, &VIDIOC-G-INPUT; and &VIDIOC-S-INPUT; +using &v4l2-input; as discussed in . + + The channel field counting +inputs was renamed to index, the video +input types were renamed as follows: + + + + struct video_channel +type + &v4l2-input; +type + + + + + VIDEO_TYPE_TV + V4L2_INPUT_TYPE_TUNER + + + VIDEO_TYPE_CAMERA + V4L2_INPUT_TYPE_CAMERA + + + + + + Unlike the tuners field +expressing the number of tuners of this input, V4L2 assumes each video +input is connected to at most one tuner. However a tuner can have more +than one input, &ie; RF connectors, and a device can have multiple +tuners. The index number of the tuner associated with the input, if +any, is stored in field tuner of +&v4l2-input;. Enumeration of tuners is discussed in . + + The redundant VIDEO_VC_TUNER flag was +dropped. Video inputs associated with a tuner are of type +V4L2_INPUT_TYPE_TUNER. The +VIDEO_VC_AUDIO flag was replaced by the +audioset field. V4L2 considers devices with +up to 32 audio inputs. Each set bit in the +audioset field represents one audio input +this video input combines with. For information about audio inputs and +how to switch between them see . + + The norm field describing the +supported video standards was replaced by +std. The V4L specification mentions a flag +VIDEO_VC_NORM indicating whether the standard can +be changed. This flag was a later addition together with the +norm field and has been removed in the +meantime. V4L2 has a similar, albeit more comprehensive approach +to video standards, see for more +information. +
+ +
+ Tuning + + The V4L VIDIOCGTUNER and +VIDIOCSTUNER ioctl and struct +video_tuner can be used to enumerate the +tuners of a V4L TV or radio device. The equivalent V4L2 ioctls are +&VIDIOC-G-TUNER; and &VIDIOC-S-TUNER; using &v4l2-tuner;. Tuners are +covered in . + + The tuner field counting tuners +was renamed to index. The fields +name, rangelow +and rangehigh remained unchanged. + + The VIDEO_TUNER_PAL, +VIDEO_TUNER_NTSC and +VIDEO_TUNER_SECAM flags indicating the supported +video standards were dropped. This information is now contained in the +associated &v4l2-input;. No replacement exists for the +VIDEO_TUNER_NORM flag indicating whether the +video standard can be switched. The mode +field to select a different video standard was replaced by a whole new +set of ioctls and structures described in . +Due to its ubiquity it should be mentioned the BTTV driver supports +several standards in addition to the regular +VIDEO_MODE_PAL (0), +VIDEO_MODE_NTSC, +VIDEO_MODE_SECAM and +VIDEO_MODE_AUTO (3). Namely N/PAL Argentina, +M/PAL, N/PAL, and NTSC Japan with numbers 3-6 (sic). + + The VIDEO_TUNER_STEREO_ON flag +indicating stereo reception became +V4L2_TUNER_SUB_STEREO in field +rxsubchans. This field also permits the +detection of monaural and bilingual audio, see the definition of +&v4l2-tuner; for details. Presently no replacement exists for the +VIDEO_TUNER_RDS_ON and +VIDEO_TUNER_MBS_ON flags. + + The VIDEO_TUNER_LOW flag was renamed +to V4L2_TUNER_CAP_LOW in the &v4l2-tuner; +capability field. + + The VIDIOCGFREQ and +VIDIOCSFREQ ioctl to change the tuner frequency +where renamed to &VIDIOC-G-FREQUENCY; and &VIDIOC-S-FREQUENCY;. They +take a pointer to a &v4l2-frequency; instead of an unsigned long +integer. +
+ +
+ Image Properties + + V4L2 has no equivalent of the +VIDIOCGPICT and VIDIOCSPICT +ioctl and struct video_picture. The following +fields where replaced by V4L2 controls accessible with the +&VIDIOC-QUERYCTRL;, &VIDIOC-G-CTRL; and &VIDIOC-S-CTRL; ioctls: + + + + struct video_picture + V4L2 Control ID + + + + + brightness + V4L2_CID_BRIGHTNESS + + + hue + V4L2_CID_HUE + + + colour + V4L2_CID_SATURATION + + + contrast + V4L2_CID_CONTRAST + + + whiteness + V4L2_CID_WHITENESS + + + + + + The V4L picture controls are assumed to range from 0 to +65535 with no particular reset value. The V4L2 API permits arbitrary +limits and defaults which can be queried with the &VIDIOC-QUERYCTRL; +ioctl. For general information about controls see . + + The depth (average number of +bits per pixel) of a video image is implied by the selected image +format. V4L2 does not explicitely provide such information assuming +applications recognizing the format are aware of the image depth and +others need not know. The palette field +moved into the &v4l2-pix-format;: + + + + struct video_picture +palette + &v4l2-pix-format; +pixfmt + + + + + VIDEO_PALETTE_GREY + V4L2_PIX_FMT_GREY + + + VIDEO_PALETTE_HI240 + V4L2_PIX_FMT_HI240 + This is a custom format used by the BTTV +driver, not one of the V4L2 standard formats. + + + + VIDEO_PALETTE_RGB565 + V4L2_PIX_FMT_RGB565 + + + VIDEO_PALETTE_RGB555 + V4L2_PIX_FMT_RGB555 + + + VIDEO_PALETTE_RGB24 + V4L2_PIX_FMT_BGR24 + + + VIDEO_PALETTE_RGB32 + V4L2_PIX_FMT_BGR32 + Presumably all V4L RGB formats are +little-endian, although some drivers might interpret them according to machine endianess. V4L2 defines little-endian, big-endian and red/blue +swapped variants. For details see . + + + + VIDEO_PALETTE_YUV422 + V4L2_PIX_FMT_YUYV + + + VIDEO_PALETTE_YUYV + VIDEO_PALETTE_YUV422 +and VIDEO_PALETTE_YUYV are the same formats. Some +V4L drivers respond to one, some to the other. + + V4L2_PIX_FMT_YUYV + + + VIDEO_PALETTE_UYVY + V4L2_PIX_FMT_UYVY + + + VIDEO_PALETTE_YUV420 + None + + + VIDEO_PALETTE_YUV411 + V4L2_PIX_FMT_Y41P + Not to be confused with +V4L2_PIX_FMT_YUV411P, which is a planar +format. + + + VIDEO_PALETTE_RAW + None V4L explains this +as: "RAW capture (BT848)" + + + VIDEO_PALETTE_YUV422P + V4L2_PIX_FMT_YUV422P + + + VIDEO_PALETTE_YUV411P + V4L2_PIX_FMT_YUV411P + Not to be confused with +V4L2_PIX_FMT_Y41P, which is a packed +format. + + + VIDEO_PALETTE_YUV420P + V4L2_PIX_FMT_YVU420 + + + VIDEO_PALETTE_YUV410P + V4L2_PIX_FMT_YVU410 + + + + + + V4L2 image formats are defined in . The image format can be selected with the +&VIDIOC-S-FMT; ioctl. +
+ +
+ Audio + + The VIDIOCGAUDIO and +VIDIOCSAUDIO ioctl and struct +video_audio are used to enumerate the +audio inputs of a V4L device. The equivalent V4L2 ioctls are +&VIDIOC-G-AUDIO; and &VIDIOC-S-AUDIO; using &v4l2-audio; as +discussed in . + + The audio "channel number" +field counting audio inputs was renamed to +index. + + On VIDIOCSAUDIO the +mode field selects one +of the VIDEO_SOUND_MONO, +VIDEO_SOUND_STEREO, +VIDEO_SOUND_LANG1 or +VIDEO_SOUND_LANG2 audio demodulation modes. When +the current audio standard is BTSC +VIDEO_SOUND_LANG2 refers to SAP and +VIDEO_SOUND_LANG1 is meaningless. Also +undocumented in the V4L specification, there is no way to query the +selected mode. On VIDIOCGAUDIO the driver returns +the actually received audio programmes in this +field. In the V4L2 API this information is stored in the &v4l2-tuner; +rxsubchans and +audmode fields, respectively. See for more information on tuners. Related to audio +modes &v4l2-audio; also reports if this is a mono or stereo +input, regardless if the source is a tuner. + + The following fields where replaced by V4L2 controls +accessible with the &VIDIOC-QUERYCTRL;, &VIDIOC-G-CTRL; and +&VIDIOC-S-CTRL; ioctls: + + + + struct +video_audio + V4L2 Control ID + + + + + volume + V4L2_CID_AUDIO_VOLUME + + + bass + V4L2_CID_AUDIO_BASS + + + treble + V4L2_CID_AUDIO_TREBLE + + + balance + V4L2_CID_AUDIO_BALANCE + + + + + + To determine which of these controls are supported by a +driver V4L provides the flags +VIDEO_AUDIO_VOLUME, +VIDEO_AUDIO_BASS, +VIDEO_AUDIO_TREBLE and +VIDEO_AUDIO_BALANCE. In the V4L2 API the +&VIDIOC-QUERYCTRL; ioctl reports if the respective control is +supported. Accordingly the VIDEO_AUDIO_MUTABLE +and VIDEO_AUDIO_MUTE flags where replaced by the +boolean V4L2_CID_AUDIO_MUTE control. + + All V4L2 controls have a step +attribute replacing the struct video_audio +step field. The V4L audio controls are +assumed to range from 0 to 65535 with no particular reset value. The +V4L2 API permits arbitrary limits and defaults which can be queried +with the &VIDIOC-QUERYCTRL; ioctl. For general information about +controls see . +
+ +
+ Frame Buffer Overlay + + The V4L2 ioctls equivalent to +VIDIOCGFBUF and VIDIOCSFBUF +are &VIDIOC-G-FBUF; and &VIDIOC-S-FBUF;. The +base field of struct +video_buffer remained unchanged, except V4L2 +defines a flag to indicate non-destructive overlays instead of a +NULL pointer. All other fields moved into the +&v4l2-pix-format; fmt substructure of +&v4l2-framebuffer;. The depth field was +replaced by pixelformat. See for a list of RGB formats and their +respective color depths. + + Instead of the special ioctls +VIDIOCGWIN and VIDIOCSWIN +V4L2 uses the general-purpose data format negotiation ioctls +&VIDIOC-G-FMT; and &VIDIOC-S-FMT;. They take a pointer to a +&v4l2-format; as argument. Here the win +member of the fmt union is used, a +&v4l2-window;. + + The x, +y, width and +height fields of struct +video_window moved into &v4l2-rect; +substructure w of struct +v4l2_window. The +chromakey, +clips, and +clipcount fields remained unchanged. Struct +video_clip was renamed to &v4l2-clip;, also +containing a struct v4l2_rect, but the +semantics are still the same. + + The VIDEO_WINDOW_INTERLACE flag was +dropped. Instead applications must set the +field field to +V4L2_FIELD_ANY or +V4L2_FIELD_INTERLACED. The +VIDEO_WINDOW_CHROMAKEY flag moved into +&v4l2-framebuffer;, under the new name +V4L2_FBUF_FLAG_CHROMAKEY. + + In V4L, storing a bitmap pointer in +clips and setting +clipcount to +VIDEO_CLIP_BITMAP (-1) requests bitmap +clipping, using a fixed size bitmap of 1024 × 625 bits. Struct +v4l2_window has a separate +bitmap pointer field for this purpose and +the bitmap size is determined by w.width and +w.height. + + The VIDIOCCAPTURE ioctl to enable or +disable overlay was renamed to &VIDIOC-OVERLAY;. +
+ +
+ Cropping + + To capture only a subsection of the full picture V4L +defines the VIDIOCGCAPTURE and +VIDIOCSCAPTURE ioctls using struct +video_capture. The equivalent V4L2 ioctls are +&VIDIOC-G-CROP; and &VIDIOC-S-CROP; using &v4l2-crop;, and the related +&VIDIOC-CROPCAP; ioctl. This is a rather complex matter, see + for details. + + The x, +y, width and +height fields moved into &v4l2-rect; +substructure c of struct +v4l2_crop. The +decimation field was dropped. In the V4L2 +API the scaling factor is implied by the size of the cropping +rectangle and the size of the captured or overlaid image. + + The VIDEO_CAPTURE_ODD +and VIDEO_CAPTURE_EVEN flags to capture only the +odd or even field, respectively, were replaced by +V4L2_FIELD_TOP and +V4L2_FIELD_BOTTOM in the field named +field of &v4l2-pix-format; and +&v4l2-window;. These structures are used to select a capture or +overlay format with the &VIDIOC-S-FMT; ioctl. +
+ +
+ Reading Images, Memory Mapping + +
+ Capturing using the read method + + There is no essential difference between reading images +from a V4L or V4L2 device using the &func-read; function, however V4L2 +drivers are not required to support this I/O method. Applications can +determine if the function is available with the &VIDIOC-QUERYCAP; +ioctl. All V4L2 devices exchanging data with applications must support +the &func-select; and &func-poll; functions. + + To select an image format and size, V4L provides the +VIDIOCSPICT and VIDIOCSWIN +ioctls. V4L2 uses the general-purpose data format negotiation ioctls +&VIDIOC-G-FMT; and &VIDIOC-S-FMT;. They take a pointer to a +&v4l2-format; as argument, here the &v4l2-pix-format; named +pix of its fmt +union is used. + + For more information about the V4L2 read interface see +. +
+
+ Capturing using memory mapping + + Applications can read from V4L devices by mapping +buffers in device memory, or more often just buffers allocated in +DMA-able system memory, into their address space. This avoids the data +copying overhead of the read method. V4L2 supports memory mapping as +well, with a few differences. + + + + + + V4L + V4L2 + + + + + + The image format must be selected before +buffers are allocated, with the &VIDIOC-S-FMT; ioctl. When no format +is selected the driver may use the last, possibly by another +application requested format. + + + Applications cannot change the number of +buffers. The it is built into the driver, unless it has a module +option to change the number when the driver module is +loaded. + The &VIDIOC-REQBUFS; ioctl allocates the +desired number of buffers, this is a required step in the initialization +sequence. + + + Drivers map all buffers as one contiguous +range of memory. The VIDIOCGMBUF ioctl is +available to query the number of buffers, the offset of each buffer +from the start of the virtual file, and the overall amount of memory +used, which can be used as arguments for the &func-mmap; +function. + Buffers are individually mapped. The +offset and size of each buffer can be determined with the +&VIDIOC-QUERYBUF; ioctl. + + + The VIDIOCMCAPTURE +ioctl prepares a buffer for capturing. It also determines the image +format for this buffer. The ioctl returns immediately, eventually with +an &EAGAIN; if no video signal had been detected. When the driver +supports more than one buffer applications can call the ioctl multiple +times and thus have multiple outstanding capture +requests.The VIDIOCSYNC ioctl +suspends execution until a particular buffer has been +filled. + Drivers maintain an incoming and outgoing +queue. &VIDIOC-QBUF; enqueues any empty buffer into the incoming +queue. Filled buffers are dequeued from the outgoing queue with the +&VIDIOC-DQBUF; ioctl. To wait until filled buffers become available this +function, &func-select; or &func-poll; can be used. The +&VIDIOC-STREAMON; ioctl must be called once after enqueuing one or +more buffers to start capturing. Its counterpart +&VIDIOC-STREAMOFF; stops capturing and dequeues all buffers from both +queues. Applications can query the signal status, if known, with the +&VIDIOC-ENUMINPUT; ioctl. + + + + + + For a more in-depth discussion of memory mapping and +examples, see . +
+
+ +
+ Reading Raw VBI Data + + Originally the V4L API did not specify a raw VBI capture +interface, only the device file /dev/vbi was +reserved for this purpose. The only driver supporting this interface +was the BTTV driver, de-facto defining the V4L VBI interface. Reading +from the device yields a raw VBI image with the following +parameters: + + + + &v4l2-vbi-format; + V4L, BTTV driver + + + + + sampling_rate + 28636363 Hz NTSC (or any other 525-line +standard); 35468950 Hz PAL and SECAM (625-line standards) + + + offset + ? + + + samples_per_line + 2048 + + + sample_format + V4L2_PIX_FMT_GREY. The last four bytes (a +machine endianess integer) contain a frame counter. + + + start[] + 10, 273 NTSC; 22, 335 PAL and SECAM + + + count[] + 16, 16Old driver +versions used different values, eventually the custom +BTTV_VBISIZE ioctl was added to query the +correct values. + + + flags + 0 + + + + + + Undocumented in the V4L specification, in Linux 2.3 the +VIDIOCGVBIFMT and +VIDIOCSVBIFMT ioctls using struct +vbi_format were added to determine the VBI +image parameters. These ioctls are only partially compatible with the +V4L2 VBI interface specified in . + + An offset field does not +exist, sample_format is supposed to be +VIDEO_PALETTE_RAW, equivalent to +V4L2_PIX_FMT_GREY. The remaining fields are +probably equivalent to &v4l2-vbi-format;. + + Apparently only the Zoran (ZR 36120) driver implements +these ioctls. The semantics differ from those specified for V4L2 in two +ways. The parameters are reset on &func-open; and +VIDIOCSVBIFMT always returns an &EINVAL; if the +parameters are invalid. +
+ +
+ Miscellaneous + + V4L2 has no equivalent of the +VIDIOCGUNIT ioctl. Applications can find the VBI +device associated with a video capture device (or vice versa) by +reopening the device and requesting VBI data. For details see +. + + No replacement exists for VIDIOCKEY, +and the V4L functions for microcode programming. A new interface for +MPEG compression and playback devices is documented in . +
+ +
+ +
+ Changes of the V4L2 API + + Soon after the V4L API was added to the kernel it was +criticised as too inflexible. In August 1998 Bill Dirks proposed a +number of improvements and began to work on documentation, example +drivers and applications. With the help of other volunteers this +eventually became the V4L2 API, not just an extension but a +replacement for the V4L API. However it took another four years and +two stable kernel releases until the new API was finally accepted for +inclusion into the kernel in its present form. + +
+ Early Versions + 1998-08-20: First version. + + 1998-08-27: The &func-select; function was introduced. + + 1998-09-10: New video standard interface. + + 1998-09-18: The VIDIOC_NONCAP ioctl +was replaced by the otherwise meaningless O_TRUNC +&func-open; flag, and the aliases O_NONCAP and +O_NOIO were defined. Applications can set this +flag if they intend to access controls only, as opposed to capture +applications which need exclusive access. The +VIDEO_STD_XXX identifiers are now ordinals +instead of flags, and the video_std_construct() +helper function takes id and transmission arguments. + + 1998-09-28: Revamped video standard. Made video controls +individually enumerable. + + 1998-10-02: The id field was +removed from struct video_standard and the +color subcarrier fields were renamed. The &VIDIOC-QUERYSTD; ioctl was +renamed to &VIDIOC-ENUMSTD;, &VIDIOC-G-INPUT; to &VIDIOC-ENUMINPUT;. A +first draft of the Codec API was released. + + 1998-11-08: Many minor changes. Most symbols have been +renamed. Some material changes to &v4l2-capability;. + + 1998-11-12: The read/write directon of some ioctls was misdefined. + + 1998-11-14: V4L2_PIX_FMT_RGB24 +changed to V4L2_PIX_FMT_BGR24, and +V4L2_PIX_FMT_RGB32 changed to +V4L2_PIX_FMT_BGR32. Audio controls are now +accessible with the &VIDIOC-G-CTRL; and &VIDIOC-S-CTRL; ioctls under +names starting with V4L2_CID_AUDIO. The +V4L2_MAJOR define was removed from +videodev.h since it was only used once in the +videodev kernel module. The +YUV422 and YUV411 planar +image formats were added. + + 1998-11-28: A few ioctl symbols changed. Interfaces for codecs and +video output devices were added. + + 1999-01-14: A raw VBI capture interface was added. + + 1999-01-19: The VIDIOC_NEXTBUF ioctl + was removed. +
+ +
+ V4L2 Version 0.16 1999-01-31 + 1999-01-27: There is now one QBUF ioctl, VIDIOC_QWBUF and VIDIOC_QRBUF +are gone. VIDIOC_QBUF takes a v4l2_buffer as a parameter. Added +digital zoom (cropping) controls. +
+ + + +
+ V4L2 Version 0.18 1999-03-16 + Added a v4l to V4L2 ioctl compatibility layer to +videodev.c. Driver writers, this changes how you implement your ioctl +handler. See the Driver Writer's Guide. Added some more control id +codes. +
+ +
+ V4L2 Version 0.19 1999-06-05 + 1999-03-18: Fill in the category and catname fields of +v4l2_queryctrl objects before passing them to the driver. Required a +minor change to the VIDIOC_QUERYCTRL handlers in the sample +drivers. + 1999-03-31: Better compatibility for v4l memory capture +ioctls. Requires changes to drivers to fully support new compatibility +features, see Driver Writer's Guide and v4l2cap.c. Added new control +IDs: V4L2_CID_HFLIP, _VFLIP. Changed V4L2_PIX_FMT_YUV422P to _YUV422P, +and _YUV411P to _YUV411P. + 1999-04-04: Added a few more control IDs. + 1999-04-07: Added the button control type. + 1999-05-02: Fixed a typo in videodev.h, and added the +V4L2_CTRL_FLAG_GRAYED (later V4L2_CTRL_FLAG_GRABBED) flag. + 1999-05-20: Definition of VIDIOC_G_CTRL was wrong causing +a malfunction of this ioctl. + 1999-06-05: Changed the value of +V4L2_CID_WHITENESS. +
+ +
+ V4L2 Version 0.20 (1999-09-10) + + Version 0.20 introduced a number of changes which were +not backward compatible with 0.19 and earlier +versions. Purpose of these changes was to simplify the API, while +making it more extensible and following common Linux driver API +conventions. + + + + Some typos in V4L2_FMT_FLAG +symbols were fixed. &v4l2-clip; was changed for compatibility with +v4l. (1999-08-30) + + + + V4L2_TUNER_SUB_LANG1 was added. +(1999-09-05) + + + + All ioctl() commands that used an integer argument now +take a pointer to an integer. Where it makes sense, ioctls will return +the actual new value in the integer pointed to by the argument, a +common convention in the V4L2 API. The affected ioctls are: +VIDIOC_PREVIEW, VIDIOC_STREAMON, VIDIOC_STREAMOFF, VIDIOC_S_FREQ, +VIDIOC_S_INPUT, VIDIOC_S_OUTPUT, VIDIOC_S_EFFECT. For example + +err = ioctl (fd, VIDIOC_XXX, V4L2_XXX); + becomes +int a = V4L2_XXX; err = ioctl(fd, VIDIOC_XXX, &a); + + + + + + All the different get- and set-format commands were +swept into one &VIDIOC-G-FMT; and &VIDIOC-S-FMT; ioctl taking a union +and a type field selecting the union member as parameter. Purpose is to +simplify the API by eliminating several ioctls and to allow new and +driver private data streams without adding new ioctls. + + This change obsoletes the following ioctls: +VIDIOC_S_INFMT, +VIDIOC_G_INFMT, +VIDIOC_S_OUTFMT, +VIDIOC_G_OUTFMT, +VIDIOC_S_VBIFMT and +VIDIOC_G_VBIFMT. The image format structure +v4l2_format was renamed to &v4l2-pix-format;, +while &v4l2-format; is now the envelopping structure for all format +negotiations. + + + + Similar to the changes above, the +VIDIOC_G_PARM and +VIDIOC_S_PARM ioctls were merged with +VIDIOC_G_OUTPARM and +VIDIOC_S_OUTPARM. A +type field in the new &v4l2-streamparm; +selects the respective union member. + + This change obsoletes the +VIDIOC_G_OUTPARM and +VIDIOC_S_OUTPARM ioctls. + + + + Control enumeration was simplified, and two new +control flags were introduced and one dropped. The +catname field was replaced by a +group field. + + Drivers can now flag unsupported and temporarily +unavailable controls with V4L2_CTRL_FLAG_DISABLED +and V4L2_CTRL_FLAG_GRABBED respectively. The +group name indicates a possibly narrower +classification than the category. In other +words, there may be multiple groups within a category. Controls within +a group would typically be drawn within a group box. Controls in +different categories might have a greater separation, or may even +appear in separate windows. + + + + The &v4l2-buffer; timestamp +was changed to a 64 bit integer, containing the sampling or output +time of the frame in nanoseconds. Additionally timestamps will be in +absolute system time, not starting from zero at the beginning of a +stream. The data type name for timestamps is stamp_t, defined as a +signed 64-bit integer. Output devices should not send a buffer out +until the time in the timestamp field has arrived. I would like to +follow SGI's lead, and adopt a multimedia timestamping system like +their UST (Unadjusted System Time). See +http://reality.sgi.com/cpirazzi_engr/lg/time/intro.html. [This link is +no longer valid.] UST uses timestamps that are 64-bit signed integers +(not struct timeval's) and given in nanosecond units. The UST clock +starts at zero when the system is booted and runs continuously and +uniformly. It takes a little over 292 years for UST to overflow. There +is no way to set the UST clock. The regular Linux time-of-day clock +can be changed periodically, which would cause errors if it were being +used for timestamping a multimedia stream. A real UST style clock will +require some support in the kernel that is not there yet. But in +anticipation, I will change the timestamp field to a 64-bit integer, +and I will change the v4l2_masterclock_gettime() function (used only +by drivers) to return a 64-bit integer. + + + + A sequence field was added +to &v4l2-buffer;. The sequence field counts +captured frames, it is ignored by output devices. When a capture +driver drops a frame, the sequence number of that frame is +skipped. + + +
+ +
+ V4L2 Version 0.20 incremental changes + + + 1999-12-23: In &v4l2-vbi-format; the +reserved1 field became +offset. Previously drivers were required to +clear the reserved1 field. + + 2000-01-13: The + V4L2_FMT_FLAG_NOT_INTERLACED flag was added. + + 2000-07-31: The linux/poll.h header +is now included by videodev.h for compatibility +with the original videodev.h file. + + 2000-11-20: V4L2_TYPE_VBI_OUTPUT and +V4L2_PIX_FMT_Y41P were added. + + 2000-11-25: V4L2_TYPE_VBI_INPUT was +added. + + 2000-12-04: A couple typos in symbol names were fixed. + + 2001-01-18: To avoid namespace conflicts the +fourcc macro defined in the +videodev.h header file was renamed to +v4l2_fourcc. + + 2001-01-25: A possible driver-level compatibility problem +between the videodev.h file in Linux 2.4.0 and +the videodev.h file included in the +videodevX patch was fixed. Users of an earlier +version of videodevX on Linux 2.4.0 should +recompile their V4L and V4L2 drivers. + + 2001-01-26: A possible kernel-level incompatibility +between the videodev.h file in the +videodevX patch and the +videodev.h file in Linux 2.2.x with devfs patches +applied was fixed. + + 2001-03-02: Certain V4L ioctls which pass data in both +direction although they are defined with read-only parameter, did not +work correctly through the backward compatibility layer. +[Solution?] + + 2001-04-13: Big endian 16-bit RGB formats were added. + + 2001-09-17: New YUV formats and the &VIDIOC-G-FREQUENCY; and +&VIDIOC-S-FREQUENCY; ioctls were added. (The old +VIDIOC_G_FREQ and +VIDIOC_S_FREQ ioctls did not take multiple tuners +into account.) + + 2000-09-18: V4L2_BUF_TYPE_VBI was +added. This may break compatibility as the +&VIDIOC-G-FMT; and &VIDIOC-S-FMT; ioctls may fail now if the struct +v4l2_fmt type +field does not contain V4L2_BUF_TYPE_VBI. In the +documentation of the &v4l2-vbi-format; +offset field the ambiguous phrase "rising +edge" was changed to "leading edge". +
+ +
+ V4L2 Version 0.20 2000-11-23 + + A number of changes were made to the raw VBI +interface. + + + + Figures clarifying the line numbering scheme were +added to the V4L2 API specification. The +start[0] and +start[1] fields no longer count line +numbers beginning at zero. Rationale: a) The previous definition was +unclear. b) The start[] values are ordinal +numbers. c) There is no point in inventing a new line numbering +scheme. We now use line number as defined by ITU-R, period. +Compatibility: Add one to the start values. Applications depending on +the previous semantics may not function correctly. + + + + The restriction "count[0] > 0 and count[1] > 0" +has been relaxed to "(count[0] + count[1]) > 0". Rationale: +Drivers may allocate resources at scan line granularity and some data +services are transmitted only on the first field. The comment that +both count values will usually be equal is +misleading and pointless and has been removed. This change +breaks compatibility with earlier versions: +Drivers may return EINVAL, applications may not function +correctly. + + + + Drivers are again permitted to return negative +(unknown) start values as proposed earlier. Why this feature was +dropped is unclear. This change may break +compatibility with applications depending on the start +values being positive. The use of EBUSY and +EINVAL error codes with the &VIDIOC-S-FMT; ioctl +was clarified. The &EBUSY; was finally documented, and the +reserved2 field which was previously +mentioned only in the videodev.h header +file. + + + + New buffer types +V4L2_TYPE_VBI_INPUT and +V4L2_TYPE_VBI_OUTPUT were added. The former is an +alias for the old V4L2_TYPE_VBI, the latter was +missing in the videodev.h file. + + +
+ +
+ V4L2 Version 0.20 2002-07-25 + Added sliced VBI interface proposal. +
+ +
+ V4L2 in Linux 2.5.46, 2002-10 + + Around October-November 2002, prior to an announced +feature freeze of Linux 2.5, the API was revised, drawing from +experience with V4L2 0.20. This unnamed version was finally merged +into Linux 2.5.46. + + + + As specified in , drivers +must make related device functions available under all minor device +numbers. + + + + The &func-open; function requires access mode +O_RDWR regardless of the device type. All V4L2 +drivers exchanging data with applications must support the +O_NONBLOCK flag. The O_NOIO +flag, a V4L2 symbol which aliased the meaningless +O_TRUNC to indicate accesses without data +exchange (panel applications) was dropped. Drivers must stay in "panel +mode" until the application attempts to initiate a data exchange, see +. + + + + The &v4l2-capability; changed dramatically. Note that +also the size of the structure changed, which is encoded in the ioctl +request code, thus older V4L2 devices will respond with an &EINVAL; to +the new &VIDIOC-QUERYCAP; ioctl. + + There are new fields to identify the driver, a new RDS +device function V4L2_CAP_RDS_CAPTURE, the +V4L2_CAP_AUDIO flag indicates if the device has +any audio connectors, another I/O capability +V4L2_CAP_ASYNCIO can be flagged. In response to +these changes the type field became a bit +set and was merged into the flags field. +V4L2_FLAG_TUNER was renamed to +V4L2_CAP_TUNER, +V4L2_CAP_VIDEO_OVERLAY replaced +V4L2_FLAG_PREVIEW and +V4L2_CAP_VBI_CAPTURE and +V4L2_CAP_VBI_OUTPUT replaced +V4L2_FLAG_DATA_SERVICE. +V4L2_FLAG_READ and +V4L2_FLAG_WRITE were merged into +V4L2_CAP_READWRITE. + + The redundant fields +inputs, outputs +and audios were removed. These properties +can be determined as described in and . + + The somewhat volatile and therefore barely useful +fields maxwidth, +maxheight, +minwidth, +minheight, +maxframerate were removed. This information +is available as described in and +. + + V4L2_FLAG_SELECT was removed. We +believe the select() function is important enough to require support +of it in all V4L2 drivers exchanging data with applications. The +redundant V4L2_FLAG_MONOCHROME flag was removed, +this information is available as described in . + + + + In &v4l2-input; the +assoc_audio field and the +capability field and its only flag +V4L2_INPUT_CAP_AUDIO was replaced by the new +audioset field. Instead of linking one +video input to one audio input this field reports all audio inputs +this video input combines with. + + New fields are tuner +(reversing the former link from tuners to video inputs), +std and +status. + + Accordingly &v4l2-output; lost its +capability and +assoc_audio fields. +audioset, +modulator and +std where added instead. + + + + The &v4l2-audio; field +audio was renamed to +index, for consistency with other +structures. A new capability flag +V4L2_AUDCAP_STEREO was added to indicated if the +audio input in question supports stereo sound. +V4L2_AUDCAP_EFFECTS and the corresponding +V4L2_AUDMODE flags where removed. This can be +easily implemented using controls. (However the same applies to AVL +which is still there.) + + Again for consistency the &v4l2-audioout; field +audio was renamed to +index. + + + + The &v4l2-tuner; +input field was replaced by an +index field, permitting devices with +multiple tuners. The link between video inputs and tuners is now +reversed, inputs point to their tuner. The +std substructure became a +simple set (more about this below) and moved into &v4l2-input;. A +type field was added. + + Accordingly in &v4l2-modulator; the +output was replaced by an +index field. + + In &v4l2-frequency; the +port field was replaced by a +tuner field containing the respective tuner +or modulator index number. A tuner type +field was added and the reserved field +became larger for future extensions (satellite tuners in +particular). + + + + The idea of completely transparent video standards was +dropped. Experience showed that applications must be able to work with +video standards beyond presenting the user a menu. Instead of +enumerating supported standards with an ioctl applications can now +refer to standards by &v4l2-std-id; and symbols defined in the +videodev2.h header file. For details see . The &VIDIOC-G-STD; and +&VIDIOC-S-STD; now take a pointer to this type as argument. +&VIDIOC-QUERYSTD; was added to autodetect the received standard, if +the hardware has this capability. In &v4l2-standard; an +index field was added for &VIDIOC-ENUMSTD;. +A &v4l2-std-id; field named id was added as +machine readable identifier, also replacing the +transmission field. The misleading +framerate field was renamed +to frameperiod. The now obsolete +colorstandard information, originally +needed to distguish between variations of standards, were +removed. + + Struct v4l2_enumstd ceased to +be. &VIDIOC-ENUMSTD; now takes a pointer to a &v4l2-standard; +directly. The information which standards are supported by a +particular video input or output moved into &v4l2-input; and +&v4l2-output; fields named std, +respectively. + + + + The &v4l2-queryctrl; fields +category and +group did not catch on and/or were not +implemented as expected and therefore removed. + + + + The &VIDIOC-TRY-FMT; ioctl was added to negotiate data +formats as with &VIDIOC-S-FMT;, but without the overhead of +programming the hardware and regardless of I/O in progress. + + In &v4l2-format; the fmt +union was extended to contain &v4l2-window;. All image format +negotiations are now possible with VIDIOC_G_FMT, +VIDIOC_S_FMT and +VIDIOC_TRY_FMT; ioctl. The +VIDIOC_G_WIN and +VIDIOC_S_WIN ioctls to prepare for a video +overlay were removed. The type field +changed to type &v4l2-buf-type; and the buffer type names changed as +follows. + + + + Old defines + &v4l2-buf-type; + + + + + V4L2_BUF_TYPE_CAPTURE + V4L2_BUF_TYPE_VIDEO_CAPTURE + + + V4L2_BUF_TYPE_CODECIN + Omitted for now + + + V4L2_BUF_TYPE_CODECOUT + Omitted for now + + + V4L2_BUF_TYPE_EFFECTSIN + Omitted for now + + + V4L2_BUF_TYPE_EFFECTSIN2 + Omitted for now + + + V4L2_BUF_TYPE_EFFECTSOUT + Omitted for now + + + V4L2_BUF_TYPE_VIDEOOUT + V4L2_BUF_TYPE_VIDEO_OUTPUT + + + - + V4L2_BUF_TYPE_VIDEO_OVERLAY + + + - + V4L2_BUF_TYPE_VBI_CAPTURE + + + - + V4L2_BUF_TYPE_VBI_OUTPUT + + + - + V4L2_BUF_TYPE_SLICED_VBI_CAPTURE + + + - + V4L2_BUF_TYPE_SLICED_VBI_OUTPUT + + + V4L2_BUF_TYPE_PRIVATE_BASE + V4L2_BUF_TYPE_PRIVATE + + + + + + + + In &v4l2-fmtdesc; a &v4l2-buf-type; field named +type was added as in &v4l2-format;. The +VIDIOC_ENUM_FBUFFMT ioctl is no longer needed and +was removed. These calls can be replaced by &VIDIOC-ENUM-FMT; with +type V4L2_BUF_TYPE_VIDEO_OVERLAY. + + + + In &v4l2-pix-format; the +depth field was removed, assuming +applications which recognize the format by its four-character-code +already know the color depth, and others do not care about it. The +same rationale lead to the removal of the +V4L2_FMT_FLAG_COMPRESSED flag. The +V4L2_FMT_FLAG_SWCONVECOMPRESSED flag was removed +because drivers are not supposed to convert images in kernel space. A +user library of conversion functions should be provided instead. The +V4L2_FMT_FLAG_BYTESPERLINE flag was redundant. +Applications can set the bytesperline field +to zero to get a reasonable default. Since the remaining flags were +replaced as well, the flags field itself +was removed. + The interlace flags were replaced by a &v4l2-field; +value in a newly added field +field. + + + + Old flag + &v4l2-field; + + + + + V4L2_FMT_FLAG_NOT_INTERLACED + ? + + + V4L2_FMT_FLAG_INTERLACED += V4L2_FMT_FLAG_COMBINED + V4L2_FIELD_INTERLACED + + + V4L2_FMT_FLAG_TOPFIELD += V4L2_FMT_FLAG_ODDFIELD + V4L2_FIELD_TOP + + + V4L2_FMT_FLAG_BOTFIELD += V4L2_FMT_FLAG_EVENFIELD + V4L2_FIELD_BOTTOM + + + - + V4L2_FIELD_SEQ_TB + + + - + V4L2_FIELD_SEQ_BT + + + - + V4L2_FIELD_ALTERNATE + + + + + + The color space flags were replaced by a +&v4l2-colorspace; value in a newly added +colorspace field, where one of +V4L2_COLORSPACE_SMPTE170M, +V4L2_COLORSPACE_BT878, +V4L2_COLORSPACE_470_SYSTEM_M or +V4L2_COLORSPACE_470_SYSTEM_BG replaces +V4L2_FMT_CS_601YUV. + + + + In &v4l2-requestbuffers; the +type field was properly defined as +&v4l2-buf-type;. Buffer types changed as mentioned above. A new +memory field of type &v4l2-memory; was +added to distinguish between I/O methods using buffers allocated +by the driver or the application. See for +details. + + + + In &v4l2-buffer; the type +field was properly defined as &v4l2-buf-type;. Buffer types changed as +mentioned above. A field field of type +&v4l2-field; was added to indicate if a buffer contains a top or +bottom field. The old field flags were removed. Since no unadjusted +system time clock was added to the kernel as planned, the +timestamp field changed back from type +stamp_t, an unsigned 64 bit integer expressing the sample time in +nanoseconds, to struct timeval. With the +addition of a second memory mapping method the +offset field moved into union +m, and a new +memory field of type &v4l2-memory; was +added to distinguish between I/O methods. See +for details. + + The V4L2_BUF_REQ_CONTIG +flag was used by the V4L compatibility layer, after changes to this +code it was no longer needed. The +V4L2_BUF_ATTR_DEVICEMEM flag would indicate if +the buffer was indeed allocated in device memory rather than DMA-able +system memory. It was barely useful and so was removed. + + + + In &v4l2-framebuffer; the +base[3] array anticipating double- and +triple-buffering in off-screen video memory, however without defining +a synchronization mechanism, was replaced by a single pointer. The +V4L2_FBUF_CAP_SCALEUP and +V4L2_FBUF_CAP_SCALEDOWN flags were removed. +Applications can determine this capability more accurately using the +new cropping and scaling interface. The +V4L2_FBUF_CAP_CLIPPING flag was replaced by +V4L2_FBUF_CAP_LIST_CLIPPING and +V4L2_FBUF_CAP_BITMAP_CLIPPING. + + + + In &v4l2-clip; the x, +y, width and +height field moved into a +c substructure of type &v4l2-rect;. The +x and y fields +were renamed to left and +top, &ie; offsets to a context dependent +origin. + + + + In &v4l2-window; the x, +y, width and +height field moved into a +w substructure as above. A +field field of type %v4l2-field; was added +to distinguish between field and frame (interlaced) overlay. + + + + The digital zoom interface, including struct +v4l2_zoomcap, struct +v4l2_zoom, +V4L2_ZOOM_NONCAP and +V4L2_ZOOM_WHILESTREAMING was replaced by a new +cropping and scaling interface. The previously unused struct +v4l2_cropcap and +v4l2_crop where redefined for this purpose. +See for details. + + + + In &v4l2-vbi-format; the +SAMPLE_FORMAT field now contains a +four-character-code as used to identify video image formats and +V4L2_PIX_FMT_GREY replaces the +V4L2_VBI_SF_UBYTE define. The +reserved field was extended. + + + + In &v4l2-captureparm; the type of the +timeperframe field changed from unsigned +long to &v4l2-fract;. This allows the accurate expression of multiples +of the NTSC-M frame rate 30000 / 1001. A new field +readbuffers was added to control the driver +behaviour in read I/O mode. + + Similar changes were made to &v4l2-outputparm;. + + + + The struct v4l2_performance +and VIDIOC_G_PERF ioctl were dropped. Except when +using the read/write I/O method, which is +limited anyway, this information is already available to +applications. + + + + The example transformation from RGB to YCbCr color +space in the old V4L2 documentation was inaccurate, this has been +corrected in . + + +
+ +
+ V4L2 2003-06-19 + + + + A new capability flag +V4L2_CAP_RADIO was added for radio devices. Prior +to this change radio devices would identify solely by having exactly one +tuner whose type field reads V4L2_TUNER_RADIO. + + + + An optional driver access priority mechanism was +added, see for details. + + + + The audio input and output interface was found to be +incomplete. + Previously the &VIDIOC-G-AUDIO; +ioctl would enumerate the available audio inputs. An ioctl to +determine the current audio input, if more than one combines with the +current video input, did not exist. So +VIDIOC_G_AUDIO was renamed to +VIDIOC_G_AUDIO_OLD, this ioctl will be removed in +the future. The &VIDIOC-ENUMAUDIO; ioctl was added to enumerate +audio inputs, while &VIDIOC-G-AUDIO; now reports the current audio +input. + The same changes were made to &VIDIOC-G-AUDOUT; and +&VIDIOC-ENUMAUDOUT;. + Until further the "videodev" module will automatically +translate between the old and new ioctls, but drivers and applications +must be updated to successfully compile again. + + + + The &VIDIOC-OVERLAY; ioctl was incorrectly defined with +write-read parameter. It was changed to write-only, while the write-read +version was renamed to VIDIOC_OVERLAY_OLD. The old +ioctl will be removed in the future. Until further the "videodev" +kernel module will automatically translate to the new version, so drivers +must be recompiled, but not applications. + + + + incorrectly stated that +clipping rectangles define regions where the video can be seen. +Correct is that clipping rectangles define regions where +no video shall be displayed and so the graphics +surface can be seen. + + + + The &VIDIOC-S-PARM; and &VIDIOC-S-CTRL; ioctls were +defined with write-only parameter, inconsistent with other ioctls +modifying their argument. They were changed to write-read, while a +_OLD suffix was added to the write-only versions. +The old ioctls will be removed in the future. Drivers and +applications assuming a constant parameter need an update. + + +
+ +
+ V4L2 2003-11-05 + + + In the following pixel +formats were incorrectly transferred from Bill Dirks' V4L2 +specification. Descriptions below refer to bytes in memory, in +ascending address order. + + + + Symbol + In this document prior to revision +0.5 + Corrected + + + + + V4L2_PIX_FMT_RGB24 + B, G, R + R, G, B + + + V4L2_PIX_FMT_BGR24 + R, G, B + B, G, R + + + V4L2_PIX_FMT_RGB32 + B, G, R, X + R, G, B, X + + + V4L2_PIX_FMT_BGR32 + R, G, B, X + B, G, R, X + + + + The +V4L2_PIX_FMT_BGR24 example was always +correct. + In the mapping +of the V4L VIDEO_PALETTE_RGB24 and +VIDEO_PALETTE_RGB32 formats to V4L2 pixel formats +was accordingly corrected. + + + + Unrelated to the fixes above, drivers may still +interpret some V4L2 RGB pixel formats differently. These issues have +yet to be addressed, for details see . + + +
+ +
+ V4L2 in Linux 2.6.6, 2004-05-09 + + + The &VIDIOC-CROPCAP; ioctl was incorrectly defined +with read-only parameter. It is now defined as write-read ioctl, while +the read-only version was renamed to +VIDIOC_CROPCAP_OLD. The old ioctl will be removed +in the future. + + +
+ +
+ V4L2 in Linux 2.6.8 + + + A new field input (former +reserved[0]) was added to the &v4l2-buffer; +structure. Purpose of this field is to alternate between video inputs +(⪚ cameras) in step with the video capturing process. This function +must be enabled with the new V4L2_BUF_FLAG_INPUT +flag. The flags field is no longer +read-only. + + +
+ +
+ V4L2 spec erratum 2004-08-01 + + + + The return value of the + function was incorrectly documented. + + + + Audio output ioctls end in -AUDOUT, not -AUDIOOUT. + + + + In the Current Audio Input example the +VIDIOC_G_AUDIO ioctl took the wrong +argument. + + + + The documentation of the &VIDIOC-QBUF; and +&VIDIOC-DQBUF; ioctls did not mention the &v4l2-buffer; +memory field. It was also missing from +examples. Also on the VIDIOC_DQBUF page the &EIO; +was not documented. + + +
+ +
+ V4L2 in Linux 2.6.14 + + + A new sliced VBI interface was added. It is documented +in and replaces the interface first +proposed in V4L2 specification 0.8. + + +
+ +
+ V4L2 in Linux 2.6.15 + + + The &VIDIOC-LOG-STATUS; ioctl was added. + + + + New video standards +V4L2_STD_NTSC_443, +V4L2_STD_SECAM_LC, +V4L2_STD_SECAM_DK (a set of SECAM D, K and K1), +and V4L2_STD_ATSC (a set of +V4L2_STD_ATSC_8_VSB and +V4L2_STD_ATSC_16_VSB) were defined. Note the +V4L2_STD_525_60 set now includes +V4L2_STD_NTSC_443. See also . + + + + The VIDIOC_G_COMP and +VIDIOC_S_COMP ioctl were renamed to +VIDIOC_G_MPEGCOMP and +VIDIOC_S_MPEGCOMP respectively. Their argument +was replaced by a struct +v4l2_mpeg_compression pointer. (The +VIDIOC_G_MPEGCOMP and +VIDIOC_S_MPEGCOMP ioctls where removed in Linux +2.6.25.) + + +
+ +
+ V4L2 spec erratum 2005-11-27 + The capture example in +called the &VIDIOC-S-CROP; ioctl without checking if cropping is +supported. In the video standard selection example in + the &VIDIOC-S-STD; call used the wrong +argument type. +
+ +
+ V4L2 spec erratum 2006-01-10 + + + The V4L2_IN_ST_COLOR_KILL flag in +&v4l2-input; not only indicates if the color killer is enabled, but +also if it is active. (The color killer disables color decoding when +it detects no color in the video signal to improve the image +quality.) + + + + &VIDIOC-S-PARM; is a write-read ioctl, not write-only as +stated on its reference page. The ioctl changed in 2003 as noted above. + + +
+ +
+ V4L2 spec erratum 2006-02-03 + + + In &v4l2-captureparm; and &v4l2-outputparm; the +timeperframe field gives the time in +seconds, not microseconds. + + +
+ +
+ V4L2 spec erratum 2006-02-04 + + + The clips field in +&v4l2-window; must point to an array of &v4l2-clip;, not a linked +list, because drivers ignore the struct +v4l2_clip.next +pointer. + + +
+ +
+ V4L2 in Linux 2.6.17 + + + New video standard macros were added: +V4L2_STD_NTSC_M_KR (NTSC M South Korea), and the +sets V4L2_STD_MN, +V4L2_STD_B, V4L2_STD_GH and +V4L2_STD_DK. The +V4L2_STD_NTSC and +V4L2_STD_SECAM sets now include +V4L2_STD_NTSC_M_KR and +V4L2_STD_SECAM_LC respectively. + + + + A new V4L2_TUNER_MODE_LANG1_LANG2 +was defined to record both languages of a bilingual program. The +use of V4L2_TUNER_MODE_STEREO for this purpose +is deprecated now. See the &VIDIOC-G-TUNER; section for +details. + + +
+ +
+ V4L2 spec erratum 2006-09-23 (Draft 0.15) + + + In various places +V4L2_BUF_TYPE_SLICED_VBI_CAPTURE and +V4L2_BUF_TYPE_SLICED_VBI_OUTPUT of the sliced VBI +interface were not mentioned along with other buffer types. + + + + In it was clarified +that the &v4l2-audio; mode field is a flags +field. + + + + did not mention the +sliced VBI and radio capability flags. + + + + In it was +clarified that applications must initialize the tuner +type field of &v4l2-frequency; before +calling &VIDIOC-S-FREQUENCY;. + + + + The reserved array +in &v4l2-requestbuffers; has 2 elements, not 32. + + + + In and the device file names +/dev/vout which never caught on were replaced +by /dev/video. + + + + With Linux 2.6.15 the possible range for VBI device minor +numbers was extended from 224-239 to 224-255. Accordingly device file names +/dev/vbi0 to /dev/vbi31 are +possible now. + + +
+ +
+ V4L2 in Linux 2.6.18 + + + New ioctls &VIDIOC-G-EXT-CTRLS;, &VIDIOC-S-EXT-CTRLS; +and &VIDIOC-TRY-EXT-CTRLS; were added, a flag to skip unsupported +controls with &VIDIOC-QUERYCTRL;, new control types +V4L2_CTRL_TYPE_INTEGER64 and +V4L2_CTRL_TYPE_CTRL_CLASS (), and new control flags +V4L2_CTRL_FLAG_READ_ONLY, +V4L2_CTRL_FLAG_UPDATE, +V4L2_CTRL_FLAG_INACTIVE and +V4L2_CTRL_FLAG_SLIDER (). See for details. + + +
+ +
+ V4L2 in Linux 2.6.19 + + + In &v4l2-sliced-vbi-cap; a buffer type field was added +replacing a reserved field. Note on architectures where the size of +enum types differs from int types the size of the structure changed. +The &VIDIOC-G-SLICED-VBI-CAP; ioctl was redefined from being read-only +to write-read. Applications must initialize the type field and clear +the reserved fields now. These changes may break the +compatibility with older drivers and applications. + + + + The ioctls &VIDIOC-ENUM-FRAMESIZES; and +&VIDIOC-ENUM-FRAMEINTERVALS; were added. + + + + A new pixel format V4L2_PIX_FMT_RGB444 () was added. + + +
+ +
+ V4L2 spec erratum 2006-10-12 (Draft 0.17) + + + V4L2_PIX_FMT_HM12 () is a YUV 4:2:0, not 4:2:2 format. + + +
+ +
+ V4L2 in Linux 2.6.21 + + + The videodev2.h header file is +now dual licensed under GNU General Public License version two or +later, and under a 3-clause BSD-style license. + + +
+ +
+ V4L2 in Linux 2.6.22 + + + Two new field orders + V4L2_FIELD_INTERLACED_TB and + V4L2_FIELD_INTERLACED_BT were + added. See for details. + + + + Three new clipping/blending methods with a global or +straight or inverted local alpha value were added to the video overlay +interface. See the description of the &VIDIOC-G-FBUF; and +&VIDIOC-S-FBUF; ioctls for details. + A new global_alpha field +was added to v4l2_window, +extending the structure. This may break +compatibility with applications using a struct +v4l2_window directly. However the VIDIOC_G/S/TRY_FMT ioctls, which take a +pointer to a v4l2_format parent +structure with padding bytes at the end, are not affected. + + + + The format of the chromakey +field in &v4l2-window; changed from "host order RGB32" to a pixel +value in the same format as the framebuffer. This may break +compatibility with existing applications. Drivers +supporting the "host order RGB32" format are not known. + + + +
+ +
+ V4L2 in Linux 2.6.24 + + + The pixel formats +V4L2_PIX_FMT_PAL8, +V4L2_PIX_FMT_YUV444, +V4L2_PIX_FMT_YUV555, +V4L2_PIX_FMT_YUV565 and +V4L2_PIX_FMT_YUV32 were added. + + +
+ +
+ V4L2 in Linux 2.6.25 + + + The pixel formats +V4L2_PIX_FMT_Y16 and +V4L2_PIX_FMT_SBGGR16 were added. + + + New controls +V4L2_CID_POWER_LINE_FREQUENCY, +V4L2_CID_HUE_AUTO, +V4L2_CID_WHITE_BALANCE_TEMPERATURE, +V4L2_CID_SHARPNESS and +V4L2_CID_BACKLIGHT_COMPENSATION were added. The +controls V4L2_CID_BLACK_LEVEL, +V4L2_CID_WHITENESS, +V4L2_CID_HCENTER and +V4L2_CID_VCENTER were deprecated. + + + + A Camera controls +class was added, with the new controls +V4L2_CID_EXPOSURE_AUTO, +V4L2_CID_EXPOSURE_ABSOLUTE, +V4L2_CID_EXPOSURE_AUTO_PRIORITY, +V4L2_CID_PAN_RELATIVE, +V4L2_CID_TILT_RELATIVE, +V4L2_CID_PAN_RESET, +V4L2_CID_TILT_RESET, +V4L2_CID_PAN_ABSOLUTE, +V4L2_CID_TILT_ABSOLUTE, +V4L2_CID_FOCUS_ABSOLUTE, +V4L2_CID_FOCUS_RELATIVE and +V4L2_CID_FOCUS_AUTO. + + + The VIDIOC_G_MPEGCOMP and +VIDIOC_S_MPEGCOMP ioctls, which were superseded +by the extended controls +interface in Linux 2.6.18, where finally removed from the +videodev2.h header file. + + +
+ +
+ V4L2 in Linux 2.6.26 + + + The pixel formats +V4L2_PIX_FMT_Y16 and +V4L2_PIX_FMT_SBGGR16 were added. + + + Added user controls +V4L2_CID_CHROMA_AGC and +V4L2_CID_COLOR_KILLER. + + +
+ +
+ V4L2 in Linux 2.6.27 + + + The &VIDIOC-S-HW-FREQ-SEEK; ioctl and the +V4L2_CAP_HW_FREQ_SEEK capability were added. + + + The pixel formats +V4L2_PIX_FMT_YVYU, +V4L2_PIX_FMT_PCA501, +V4L2_PIX_FMT_PCA505, +V4L2_PIX_FMT_PCA508, +V4L2_PIX_FMT_PCA561, +V4L2_PIX_FMT_SGBRG8, +V4L2_PIX_FMT_PAC207 and +V4L2_PIX_FMT_PJPG were added. + + +
+ +
+ V4L2 in Linux 2.6.28 + + + Added V4L2_MPEG_AUDIO_ENCODING_AAC and +V4L2_MPEG_AUDIO_ENCODING_AC3 MPEG audio encodings. + + + Added V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC MPEG +video encoding. + + + The pixel formats +V4L2_PIX_FMT_SGRBG10 and +V4L2_PIX_FMT_SGRBG10DPCM8 were added. + + +
+ +
+ V4L2 in Linux 2.6.29 + + + The VIDIOC_G_CHIP_IDENT ioctl was renamed +to VIDIOC_G_CHIP_IDENT_OLD and &VIDIOC-DBG-G-CHIP-IDENT; +was introduced in its place. The old struct v4l2_chip_ident +was renamed to v4l2_chip_ident_old. + + + The pixel formats +V4L2_PIX_FMT_VYUY, +V4L2_PIX_FMT_NV16 and +V4L2_PIX_FMT_NV61 were added. + + + Added camera controls +V4L2_CID_ZOOM_ABSOLUTE, +V4L2_CID_ZOOM_RELATIVE, +V4L2_CID_ZOOM_CONTINUOUS and +V4L2_CID_PRIVACY. + + +
+
+ V4L2 in Linux 2.6.30 + + + New control flag V4L2_CTRL_FLAG_WRITE_ONLY was added. + + + New control V4L2_CID_COLORFX was added. + + +
+
+ V4L2 in Linux 2.6.32 + + + In order to be easier to compare a V4L2 API and a kernel +version, now V4L2 API is numbered using the Linux Kernel version numeration. + + + Finalized the RDS capture API. See for +more information. + + + Added new capabilities for modulators and RDS encoders. + + + Add description for libv4l API. + + + Added support for string controls via new type V4L2_CTRL_TYPE_STRING. + + + Added V4L2_CID_BAND_STOP_FILTER documentation. + + + Added FM Modulator (FM TX) Extended Control Class: V4L2_CTRL_CLASS_FM_TX and their Control IDs. + + + Added Remote Controller chapter, describing the default Remote Controller mapping for media devices. + + +
+
+ +
+ Relation of V4L2 to other Linux multimedia APIs + +
+ X Video Extension + + The X Video Extension (abbreviated XVideo or just Xv) is +an extension of the X Window system, implemented for example by the +XFree86 project. Its scope is similar to V4L2, an API to video capture +and output devices for X clients. Xv allows applications to display +live video in a window, send window contents to a TV output, and +capture or output still images in XPixmaps + This is not implemented in XFree86. + . With their implementation XFree86 makes the +extension available across many operating systems and +architectures. + + Because the driver is embedded into the X server Xv has a +number of advantages over the V4L2 video +overlay interface. The driver can easily determine the overlay +target, &ie; visible graphics memory or off-screen buffers for a +destructive overlay. It can program the RAMDAC for a non-destructive +overlay, scaling or color-keying, or the clipping functions of the +video capture hardware, always in sync with drawing operations or +windows moving or changing their stacking order. + + To combine the advantages of Xv and V4L a special Xv +driver exists in XFree86 and XOrg, just programming any overlay capable +Video4Linux device it finds. To enable it +/etc/X11/XF86Config must contain these lines: + +Section "Module" + Load "v4l" +EndSection + + As of XFree86 4.2 this driver still supports only V4L +ioctls, however it should work just fine with all V4L2 devices through +the V4L2 backward-compatibility layer. Since V4L2 permits multiple +opens it is possible (if supported by the V4L2 driver) to capture +video while an X client requested video overlay. Restrictions of +simultaneous capturing and overlay are discussed in apply. + + Only marginally related to V4L2, XFree86 extended Xv to +support hardware YUV to RGB conversion and scaling for faster video +playback, and added an interface to MPEG-2 decoding hardware. This API +is useful to display images captured with V4L2 devices. +
+ +
+ Digital Video + + V4L2 does not support digital terrestrial, cable or +satellite broadcast. A separate project aiming at digital receivers +exists. You can find its homepage at http://linuxtv.org. The Linux DVB API +has no connection to the V4L2 API except that drivers for hybrid +hardware may support both. +
+ +
+ Audio Interfaces + + [to do - OSS/ALSA] +
+
+ +
+ Experimental API Elements + + The following V4L2 API elements are currently experimental +and may change in the future. + + + + Video Output Overlay (OSD) Interface, . + + + V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY, + &v4l2-buf-type;, . + + + V4L2_CAP_VIDEO_OUTPUT_OVERLAY, +&VIDIOC-QUERYCAP; ioctl, . + + + &VIDIOC-ENUM-FRAMESIZES; and +&VIDIOC-ENUM-FRAMEINTERVALS; ioctls. + + + &VIDIOC-G-ENC-INDEX; ioctl. + + + &VIDIOC-ENCODER-CMD; and &VIDIOC-TRY-ENCODER-CMD; +ioctls. + + + &VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER; +ioctls. + + + &VIDIOC-DBG-G-CHIP-IDENT; ioctl. + + +
+ +
+ Obsolete API Elements + + The following V4L2 API elements were superseded by new +interfaces and should not be implemented in new drivers. + + + + VIDIOC_G_MPEGCOMP and +VIDIOC_S_MPEGCOMP ioctls. Use Extended Controls, +. + + +
+ + diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/v4l/controls.xml new file mode 100644 index 00000000000..f492accb691 --- /dev/null +++ b/Documentation/DocBook/v4l/controls.xml @@ -0,0 +1,2049 @@ +
+ User Controls + + Devices typically have a number of user-settable controls +such as brightness, saturation and so on, which would be presented to +the user on a graphical user interface. But, different devices +will have different controls available, and furthermore, the range of +possible values, and the default value will vary from device to +device. The control ioctls provide the information and a mechanism to +create a nice user interface for these controls that will work +correctly with any device. + + All controls are accessed using an ID value. V4L2 defines +several IDs for specific purposes. Drivers can also implement their +own custom controls using V4L2_CID_PRIVATE_BASE +and higher values. The pre-defined control IDs have the prefix +V4L2_CID_, and are listed in . The ID is used when querying the attributes of +a control, and when getting or setting the current value. + + Generally applications should present controls to the user +without assumptions about their purpose. Each control comes with a +name string the user is supposed to understand. When the purpose is +non-intuitive the driver writer should provide a user manual, a user +interface plug-in or a driver specific panel application. Predefined +IDs were introduced to change a few controls programmatically, for +example to mute a device during a channel switch. + + Drivers may enumerate different controls after switching +the current video input or output, tuner or modulator, or audio input +or output. Different in the sense of other bounds, another default and +current value, step size or other menu items. A control with a certain +custom ID can also change name and +type. + It will be more convenient for applications if drivers +make use of the V4L2_CTRL_FLAG_DISABLED flag, but +that was never required. + Control values are stored globally, they do not +change when switching except to stay within the reported bounds. They +also do not change ⪚ when the device is opened or closed, when the +tuner radio frequency is changed or generally never without +application request. Since V4L2 specifies no event mechanism, panel +applications intended to cooperate with other panel applications (be +they built into a larger application, as a TV viewer) may need to +regularly poll control values to update their user +interface. + Applications could call an ioctl to request events. +After another process called &VIDIOC-S-CTRL; or another ioctl changing +shared properties the &func-select; function would indicate +readability until any ioctl (querying the properties) is +called. + + + + Control IDs + + &cs-def; + + + ID + Type + Description + + + + + V4L2_CID_BASE + + First predefined ID, equal to +V4L2_CID_BRIGHTNESS. + + + V4L2_CID_USER_BASE + + Synonym of V4L2_CID_BASE. + + + V4L2_CID_BRIGHTNESS + integer + Picture brightness, or more precisely, the black +level. + + + V4L2_CID_CONTRAST + integer + Picture contrast or luma gain. + + + V4L2_CID_SATURATION + integer + Picture color saturation or chroma gain. + + + V4L2_CID_HUE + integer + Hue or color balance. + + + V4L2_CID_AUDIO_VOLUME + integer + Overall audio volume. Note some drivers also +provide an OSS or ALSA mixer interface. + + + V4L2_CID_AUDIO_BALANCE + integer + Audio stereo balance. Minimum corresponds to all +the way left, maximum to right. + + + V4L2_CID_AUDIO_BASS + integer + Audio bass adjustment. + + + V4L2_CID_AUDIO_TREBLE + integer + Audio treble adjustment. + + + V4L2_CID_AUDIO_MUTE + boolean + Mute audio, &ie; set the volume to zero, however +without affecting V4L2_CID_AUDIO_VOLUME. Like +ALSA drivers, V4L2 drivers must mute at load time to avoid excessive +noise. Actually the entire device should be reset to a low power +consumption state. + + + V4L2_CID_AUDIO_LOUDNESS + boolean + Loudness mode (bass boost). + + + V4L2_CID_BLACK_LEVEL + integer + Another name for brightness (not a synonym of +V4L2_CID_BRIGHTNESS). This control is deprecated +and should not be used in new drivers and applications. + + + V4L2_CID_AUTO_WHITE_BALANCE + boolean + Automatic white balance (cameras). + + + V4L2_CID_DO_WHITE_BALANCE + button + This is an action control. When set (the value is +ignored), the device will do a white balance and then hold the current +setting. Contrast this with the boolean +V4L2_CID_AUTO_WHITE_BALANCE, which, when +activated, keeps adjusting the white balance. + + + V4L2_CID_RED_BALANCE + integer + Red chroma balance. + + + V4L2_CID_BLUE_BALANCE + integer + Blue chroma balance. + + + V4L2_CID_GAMMA + integer + Gamma adjust. + + + V4L2_CID_WHITENESS + integer + Whiteness for grey-scale devices. This is a synonym +for V4L2_CID_GAMMA. This control is deprecated +and should not be used in new drivers and applications. + + + V4L2_CID_EXPOSURE + integer + Exposure (cameras). [Unit?] + + + V4L2_CID_AUTOGAIN + boolean + Automatic gain/exposure control. + + + V4L2_CID_GAIN + integer + Gain control. + + + V4L2_CID_HFLIP + boolean + Mirror the picture horizontally. + + + V4L2_CID_VFLIP + boolean + Mirror the picture vertically. + + + V4L2_CID_HCENTER_DEPRECATED (formerly V4L2_CID_HCENTER) + integer + Horizontal image centering. This control is +deprecated. New drivers and applications should use the Camera class controls +V4L2_CID_PAN_ABSOLUTE, +V4L2_CID_PAN_RELATIVE and +V4L2_CID_PAN_RESET instead. + + + V4L2_CID_VCENTER_DEPRECATED + (formerly V4L2_CID_VCENTER) + integer + Vertical image centering. Centering is intended to +physically adjust cameras. For image cropping see +, for clipping . This +control is deprecated. New drivers and applications should use the +Camera class controls +V4L2_CID_TILT_ABSOLUTE, +V4L2_CID_TILT_RELATIVE and +V4L2_CID_TILT_RESET instead. + + + V4L2_CID_POWER_LINE_FREQUENCY + enum + Enables a power line frequency filter to avoid +flicker. Possible values for enum v4l2_power_line_frequency are: +V4L2_CID_POWER_LINE_FREQUENCY_DISABLED (0), +V4L2_CID_POWER_LINE_FREQUENCY_50HZ (1) and +V4L2_CID_POWER_LINE_FREQUENCY_60HZ (2). + + + V4L2_CID_HUE_AUTO + boolean + Enables automatic hue control by the device. The +effect of setting V4L2_CID_HUE while automatic +hue control is enabled is undefined, drivers should ignore such +request. + + + V4L2_CID_WHITE_BALANCE_TEMPERATURE + integer + This control specifies the white balance settings +as a color temperature in Kelvin. A driver should have a minimum of +2800 (incandescent) to 6500 (daylight). For more information about +color temperature see Wikipedia. + + + V4L2_CID_SHARPNESS + integer + Adjusts the sharpness filters in a camera. The +minimum value disables the filters, higher values give a sharper +picture. + + + V4L2_CID_BACKLIGHT_COMPENSATION + integer + Adjusts the backlight compensation in a camera. The +minimum value disables backlight compensation. + + + V4L2_CID_CHROMA_AGC + boolean + Chroma automatic gain control. + + + V4L2_CID_COLOR_KILLER + boolean + Enable the color killer (&ie; force a black & white image in case of a weak video signal). + + + V4L2_CID_COLORFX + enum + Selects a color effect. Possible values for +enum v4l2_colorfx are: +V4L2_COLORFX_NONE (0), +V4L2_COLORFX_BW (1) and +V4L2_COLORFX_SEPIA (2). + + + V4L2_CID_LASTP1 + + End of the predefined control IDs (currently +V4L2_CID_COLORFX + 1). + + + V4L2_CID_PRIVATE_BASE + + ID of the first custom (driver specific) control. +Applications depending on particular custom controls should check the +driver name and version, see . + + + +
+ + Applications can enumerate the available controls with the +&VIDIOC-QUERYCTRL; and &VIDIOC-QUERYMENU; ioctls, get and set a +control value with the &VIDIOC-G-CTRL; and &VIDIOC-S-CTRL; ioctls. +Drivers must implement VIDIOC_QUERYCTRL, +VIDIOC_G_CTRL and +VIDIOC_S_CTRL when the device has one or more +controls, VIDIOC_QUERYMENU when it has one or +more menu type controls. + + + Enumerating all controls + + +&v4l2-queryctrl; queryctrl; +&v4l2-querymenu; querymenu; + +static void +enumerate_menu (void) +{ + printf (" Menu items:\n"); + + memset (&querymenu, 0, sizeof (querymenu)); + querymenu.id = queryctrl.id; + + for (querymenu.index = queryctrl.minimum; + querymenu.index <= queryctrl.maximum; + querymenu.index++) { + if (0 == ioctl (fd, &VIDIOC-QUERYMENU;, &querymenu)) { + printf (" %s\n", querymenu.name); + } else { + perror ("VIDIOC_QUERYMENU"); + exit (EXIT_FAILURE); + } + } +} + +memset (&queryctrl, 0, sizeof (queryctrl)); + +for (queryctrl.id = V4L2_CID_BASE; + queryctrl.id < V4L2_CID_LASTP1; + queryctrl.id++) { + if (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { + if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) + continue; + + printf ("Control %s\n", queryctrl.name); + + if (queryctrl.type == V4L2_CTRL_TYPE_MENU) + enumerate_menu (); + } else { + if (errno == EINVAL) + continue; + + perror ("VIDIOC_QUERYCTRL"); + exit (EXIT_FAILURE); + } +} + +for (queryctrl.id = V4L2_CID_PRIVATE_BASE;; + queryctrl.id++) { + if (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { + if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) + continue; + + printf ("Control %s\n", queryctrl.name); + + if (queryctrl.type == V4L2_CTRL_TYPE_MENU) + enumerate_menu (); + } else { + if (errno == EINVAL) + break; + + perror ("VIDIOC_QUERYCTRL"); + exit (EXIT_FAILURE); + } +} + + + + + Changing controls + + +&v4l2-queryctrl; queryctrl; +&v4l2-control; control; + +memset (&queryctrl, 0, sizeof (queryctrl)); +queryctrl.id = V4L2_CID_BRIGHTNESS; + +if (-1 == ioctl (fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { + if (errno != EINVAL) { + perror ("VIDIOC_QUERYCTRL"); + exit (EXIT_FAILURE); + } else { + printf ("V4L2_CID_BRIGHTNESS is not supported\n"); + } +} else if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) { + printf ("V4L2_CID_BRIGHTNESS is not supported\n"); +} else { + memset (&control, 0, sizeof (control)); + control.id = V4L2_CID_BRIGHTNESS; + control.value = queryctrl.default_value; + + if (-1 == ioctl (fd, &VIDIOC-S-CTRL;, &control)) { + perror ("VIDIOC_S_CTRL"); + exit (EXIT_FAILURE); + } +} + +memset (&control, 0, sizeof (control)); +control.id = V4L2_CID_CONTRAST; + +if (0 == ioctl (fd, &VIDIOC-G-CTRL;, &control)) { + control.value += 1; + + /* The driver may clamp the value or return ERANGE, ignored here */ + + if (-1 == ioctl (fd, &VIDIOC-S-CTRL;, &control) + && errno != ERANGE) { + perror ("VIDIOC_S_CTRL"); + exit (EXIT_FAILURE); + } +/* Ignore if V4L2_CID_CONTRAST is unsupported */ +} else if (errno != EINVAL) { + perror ("VIDIOC_G_CTRL"); + exit (EXIT_FAILURE); +} + +control.id = V4L2_CID_AUDIO_MUTE; +control.value = TRUE; /* silence */ + +/* Errors ignored */ +ioctl (fd, VIDIOC_S_CTRL, &control); + + +
+ +
+ Extended Controls + +
+ Introduction + + The control mechanism as originally designed was meant +to be used for user settings (brightness, saturation, etc). However, +it turned out to be a very useful model for implementing more +complicated driver APIs where each driver implements only a subset of +a larger API. + + The MPEG encoding API was the driving force behind +designing and implementing this extended control mechanism: the MPEG +standard is quite large and the currently supported hardware MPEG +encoders each only implement a subset of this standard. Further more, +many parameters relating to how the video is encoded into an MPEG +stream are specific to the MPEG encoding chip since the MPEG standard +only defines the format of the resulting MPEG stream, not how the +video is actually encoded into that format. + + Unfortunately, the original control API lacked some +features needed for these new uses and so it was extended into the +(not terribly originally named) extended control API. + + Even though the MPEG encoding API was the first effort +to use the Extended Control API, nowadays there are also other classes +of Extended Controls, such as Camera Controls and FM Transmitter Controls. +The Extended Controls API as well as all Extended Controls classes are +described in the following text. +
+ +
+ The Extended Control API + + Three new ioctls are available: &VIDIOC-G-EXT-CTRLS;, +&VIDIOC-S-EXT-CTRLS; and &VIDIOC-TRY-EXT-CTRLS;. These ioctls act on +arrays of controls (as opposed to the &VIDIOC-G-CTRL; and +&VIDIOC-S-CTRL; ioctls that act on a single control). This is needed +since it is often required to atomically change several controls at +once. + + Each of the new ioctls expects a pointer to a +&v4l2-ext-controls;. This structure contains a pointer to the control +array, a count of the number of controls in that array and a control +class. Control classes are used to group similar controls into a +single class. For example, control class +V4L2_CTRL_CLASS_USER contains all user controls +(&ie; all controls that can also be set using the old +VIDIOC_S_CTRL ioctl). Control class +V4L2_CTRL_CLASS_MPEG contains all controls +relating to MPEG encoding, etc. + + All controls in the control array must belong to the +specified control class. An error is returned if this is not the +case. + + It is also possible to use an empty control array (count +== 0) to check whether the specified control class is +supported. + + The control array is a &v4l2-ext-control; array. The +v4l2_ext_control structure is very similar to +&v4l2-control;, except for the fact that it also allows for 64-bit +values and pointers to be passed. + + It is important to realize that due to the flexibility of +controls it is necessary to check whether the control you want to set +actually is supported in the driver and what the valid range of values +is. So use the &VIDIOC-QUERYCTRL; and &VIDIOC-QUERYMENU; ioctls to +check this. Also note that it is possible that some of the menu +indices in a control of type V4L2_CTRL_TYPE_MENU +may not be supported (VIDIOC_QUERYMENU will +return an error). A good example is the list of supported MPEG audio +bitrates. Some drivers only support one or two bitrates, others +support a wider range. +
+ +
+ Enumerating Extended Controls + + The recommended way to enumerate over the extended +controls is by using &VIDIOC-QUERYCTRL; in combination with the +V4L2_CTRL_FLAG_NEXT_CTRL flag: + + + +&v4l2-queryctrl; qctrl; + +qctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL; +while (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &qctrl)) { + /* ... */ + qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; +} + + + + The initial control ID is set to 0 ORed with the +V4L2_CTRL_FLAG_NEXT_CTRL flag. The +VIDIOC_QUERYCTRL ioctl will return the first +control with a higher ID than the specified one. When no such controls +are found an error is returned. + + If you want to get all controls within a specific control +class, then you can set the initial +qctrl.id value to the control class and add +an extra check to break out of the loop when a control of another +control class is found: + + + +qctrl.id = V4L2_CTRL_CLASS_MPEG | V4L2_CTRL_FLAG_NEXT_CTRL; +while (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &qctrl)) { + if (V4L2_CTRL_ID2CLASS (qctrl.id) != V4L2_CTRL_CLASS_MPEG) + break; + /* ... */ + qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; + } + + + + The 32-bit qctrl.id value is +subdivided into three bit ranges: the top 4 bits are reserved for +flags (⪚ V4L2_CTRL_FLAG_NEXT_CTRL) and are not +actually part of the ID. The remaining 28 bits form the control ID, of +which the most significant 12 bits define the control class and the +least significant 16 bits identify the control within the control +class. It is guaranteed that these last 16 bits are always non-zero +for controls. The range of 0x1000 and up are reserved for +driver-specific controls. The macro +V4L2_CTRL_ID2CLASS(id) returns the control class +ID based on a control ID. + + If the driver does not support extended controls, then +VIDIOC_QUERYCTRL will fail when used in +combination with V4L2_CTRL_FLAG_NEXT_CTRL. In +that case the old method of enumerating control should be used (see +1.8). But if it is supported, then it is guaranteed to enumerate over +all controls, including driver-private controls. +
+ +
+ Creating Control Panels + + It is possible to create control panels for a graphical +user interface where the user can select the various controls. +Basically you will have to iterate over all controls using the method +described above. Each control class starts with a control of type +V4L2_CTRL_TYPE_CTRL_CLASS. +VIDIOC_QUERYCTRL will return the name of this +control class which can be used as the title of a tab page within a +control panel. + + The flags field of &v4l2-queryctrl; also contains hints on +the behavior of the control. See the &VIDIOC-QUERYCTRL; documentation +for more details. +
+ +
+ MPEG Control Reference + + Below all controls within the MPEG control class are +described. First the generic controls, then controls specific for +certain hardware. + +
+ Generic MPEG Controls + + + MPEG Control IDs + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_MPEG_CLASS  + class + The MPEG class +descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a +description of this control class. This description can be used as the +caption of a Tab page in a GUI, for example. + + + + V4L2_CID_MPEG_STREAM_TYPE  + enum v4l2_mpeg_stream_type + The MPEG-1, -2 or -4 +output stream type. One cannot assume anything here. Each hardware +MPEG encoder tends to support different subsets of the available MPEG +stream types. The currently defined stream types are: + + + + + + V4L2_MPEG_STREAM_TYPE_MPEG2_PS  + MPEG-2 program stream + + + V4L2_MPEG_STREAM_TYPE_MPEG2_TS  + MPEG-2 transport stream + + + V4L2_MPEG_STREAM_TYPE_MPEG1_SS  + MPEG-1 system stream + + + V4L2_MPEG_STREAM_TYPE_MPEG2_DVD  + MPEG-2 DVD-compatible stream + + + V4L2_MPEG_STREAM_TYPE_MPEG1_VCD  + MPEG-1 VCD-compatible stream + + + V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD  + MPEG-2 SVCD-compatible stream + + + + + + + V4L2_CID_MPEG_STREAM_PID_PMT  + integer + Program Map Table +Packet ID for the MPEG transport stream (default 16) + + + + V4L2_CID_MPEG_STREAM_PID_AUDIO  + integer + Audio Packet ID for +the MPEG transport stream (default 256) + + + + V4L2_CID_MPEG_STREAM_PID_VIDEO  + integer + Video Packet ID for +the MPEG transport stream (default 260) + + + + V4L2_CID_MPEG_STREAM_PID_PCR  + integer + Packet ID for the +MPEG transport stream carrying PCR fields (default 259) + + + + V4L2_CID_MPEG_STREAM_PES_ID_AUDIO  + integer + Audio ID for MPEG +PES + + + + V4L2_CID_MPEG_STREAM_PES_ID_VIDEO  + integer + Video ID for MPEG +PES + + + + V4L2_CID_MPEG_STREAM_VBI_FMT  + enum v4l2_mpeg_stream_vbi_fmt + Some cards can embed +VBI data (⪚ Closed Caption, Teletext) into the MPEG stream. This +control selects whether VBI data should be embedded, and if so, what +embedding method should be used. The list of possible VBI formats +depends on the driver. The currently defined VBI format types +are: + + + + + + V4L2_MPEG_STREAM_VBI_FMT_NONE  + No VBI in the MPEG stream + + + V4L2_MPEG_STREAM_VBI_FMT_IVTV  + VBI in private packets, IVTV format (documented +in the kernel sources in the file Documentation/video4linux/cx2341x/README.vbi) + + + + + + + V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ  + enum v4l2_mpeg_audio_sampling_freq + MPEG Audio sampling +frequency. Possible values are: + + + + + + V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100  + 44.1 kHz + + + V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000  + 48 kHz + + + V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000  + 32 kHz + + + + + + + V4L2_CID_MPEG_AUDIO_ENCODING  + enum v4l2_mpeg_audio_encoding + MPEG Audio encoding. +Possible values are: + + + + + + V4L2_MPEG_AUDIO_ENCODING_LAYER_1  + MPEG-1/2 Layer I encoding + + + V4L2_MPEG_AUDIO_ENCODING_LAYER_2  + MPEG-1/2 Layer II encoding + + + V4L2_MPEG_AUDIO_ENCODING_LAYER_3  + MPEG-1/2 Layer III encoding + + + V4L2_MPEG_AUDIO_ENCODING_AAC  + MPEG-2/4 AAC (Advanced Audio Coding) + + + V4L2_MPEG_AUDIO_ENCODING_AC3  + AC-3 aka ATSC A/52 encoding + + + + + + + V4L2_CID_MPEG_AUDIO_L1_BITRATE  + enum v4l2_mpeg_audio_l1_bitrate + MPEG-1/2 Layer I bitrate. +Possible values are: + + + + + + V4L2_MPEG_AUDIO_L1_BITRATE_32K  + 32 kbit/s + + V4L2_MPEG_AUDIO_L1_BITRATE_64K  + 64 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_96K  + 96 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_128K  + 128 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_160K  + 160 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_192K  + 192 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_224K  + 224 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_256K  + 256 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_288K  + 288 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_320K  + 320 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_352K  + 352 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_384K  + 384 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_416K  + 416 kbit/s + + + V4L2_MPEG_AUDIO_L1_BITRATE_448K  + 448 kbit/s + + + + + + + V4L2_CID_MPEG_AUDIO_L2_BITRATE  + enum v4l2_mpeg_audio_l2_bitrate + MPEG-1/2 Layer II bitrate. +Possible values are: + + + + + + V4L2_MPEG_AUDIO_L2_BITRATE_32K  + 32 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_48K  + 48 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_56K  + 56 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_64K  + 64 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_80K  + 80 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_96K  + 96 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_112K  + 112 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_128K  + 128 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_160K  + 160 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_192K  + 192 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_224K  + 224 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_256K  + 256 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_320K  + 320 kbit/s + + + V4L2_MPEG_AUDIO_L2_BITRATE_384K  + 384 kbit/s + + + + + + + V4L2_CID_MPEG_AUDIO_L3_BITRATE  + enum v4l2_mpeg_audio_l3_bitrate + MPEG-1/2 Layer III bitrate. +Possible values are: + + + + + + V4L2_MPEG_AUDIO_L3_BITRATE_32K  + 32 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_40K  + 40 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_48K  + 48 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_56K  + 56 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_64K  + 64 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_80K  + 80 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_96K  + 96 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_112K  + 112 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_128K  + 128 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_160K  + 160 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_192K  + 192 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_224K  + 224 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_256K  + 256 kbit/s + + + V4L2_MPEG_AUDIO_L3_BITRATE_320K  + 320 kbit/s + + + + + + + V4L2_CID_MPEG_AUDIO_AAC_BITRATE  + integer + AAC bitrate in bits per second. + + + + V4L2_CID_MPEG_AUDIO_AC3_BITRATE  + enum v4l2_mpeg_audio_ac3_bitrate + AC-3 bitrate. +Possible values are: + + + + + + V4L2_MPEG_AUDIO_AC3_BITRATE_32K  + 32 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_40K  + 40 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_48K  + 48 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_56K  + 56 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_64K  + 64 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_80K  + 80 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_96K  + 96 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_112K  + 112 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_128K  + 128 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_160K  + 160 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_192K  + 192 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_224K  + 224 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_256K  + 256 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_320K  + 320 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_384K  + 384 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_448K  + 448 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_512K  + 512 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_576K  + 576 kbit/s + + + V4L2_MPEG_AUDIO_AC3_BITRATE_640K  + 640 kbit/s + + + + + + + V4L2_CID_MPEG_AUDIO_MODE  + enum v4l2_mpeg_audio_mode + MPEG Audio mode. +Possible values are: + + + + + + V4L2_MPEG_AUDIO_MODE_STEREO  + Stereo + + + V4L2_MPEG_AUDIO_MODE_JOINT_STEREO  + Joint Stereo + + + V4L2_MPEG_AUDIO_MODE_DUAL  + Bilingual + + + V4L2_MPEG_AUDIO_MODE_MONO  + Mono + + + + + + + V4L2_CID_MPEG_AUDIO_MODE_EXTENSION  + enum v4l2_mpeg_audio_mode_extension + Joint Stereo +audio mode extension. In Layer I and II they indicate which subbands +are in intensity stereo. All other subbands are coded in stereo. Layer +III is not (yet) supported. Possible values +are: + + + + + + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4  + Subbands 4-31 in intensity stereo + + + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8  + Subbands 8-31 in intensity stereo + + + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12  + Subbands 12-31 in intensity stereo + + + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16  + Subbands 16-31 in intensity stereo + + + + + + + V4L2_CID_MPEG_AUDIO_EMPHASIS  + enum v4l2_mpeg_audio_emphasis + Audio Emphasis. +Possible values are: + + + + + + V4L2_MPEG_AUDIO_EMPHASIS_NONE  + None + + + V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS  + 50/15 microsecond emphasis + + + V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17  + CCITT J.17 + + + + + + + V4L2_CID_MPEG_AUDIO_CRC  + enum v4l2_mpeg_audio_crc + CRC method. Possible +values are: + + + + + + V4L2_MPEG_AUDIO_CRC_NONE  + None + + + V4L2_MPEG_AUDIO_CRC_CRC16  + 16 bit parity check + + + + + + + V4L2_CID_MPEG_AUDIO_MUTE  + boolean + Mutes the audio when +capturing. This is not done by muting audio hardware, which can still +produce a slight hiss, but in the encoder itself, guaranteeing a fixed +and reproducable audio bitstream. 0 = unmuted, 1 = muted. + + + + V4L2_CID_MPEG_VIDEO_ENCODING  + enum v4l2_mpeg_video_encoding + MPEG Video encoding +method. Possible values are: + + + + + + V4L2_MPEG_VIDEO_ENCODING_MPEG_1  + MPEG-1 Video encoding + + + V4L2_MPEG_VIDEO_ENCODING_MPEG_2  + MPEG-2 Video encoding + + + V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC  + MPEG-4 AVC (H.264) Video encoding + + + + + + + V4L2_CID_MPEG_VIDEO_ASPECT  + enum v4l2_mpeg_video_aspect + Video aspect. +Possible values are: + + + + + + V4L2_MPEG_VIDEO_ASPECT_1x1  + + + V4L2_MPEG_VIDEO_ASPECT_4x3  + + + V4L2_MPEG_VIDEO_ASPECT_16x9  + + + V4L2_MPEG_VIDEO_ASPECT_221x100  + + + + + + + V4L2_CID_MPEG_VIDEO_B_FRAMES  + integer + Number of B-Frames +(default 2) + + + + V4L2_CID_MPEG_VIDEO_GOP_SIZE  + integer + GOP size (default +12) + + + + V4L2_CID_MPEG_VIDEO_GOP_CLOSURE  + boolean + GOP closure (default +1) + + + + V4L2_CID_MPEG_VIDEO_PULLDOWN  + boolean + Enable 3:2 pulldown +(default 0) + + + + V4L2_CID_MPEG_VIDEO_BITRATE_MODE  + enum v4l2_mpeg_video_bitrate_mode + Video bitrate mode. +Possible values are: + + + + + + V4L2_MPEG_VIDEO_BITRATE_MODE_VBR  + Variable bitrate + + + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR  + Constant bitrate + + + + + + + V4L2_CID_MPEG_VIDEO_BITRATE  + integer + Video bitrate in bits +per second. + + + + V4L2_CID_MPEG_VIDEO_BITRATE_PEAK  + integer + Peak video bitrate in +bits per second. Must be larger or equal to the average video bitrate. +It is ignored if the video bitrate mode is set to constant +bitrate. + + + + V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION  + integer + For every captured +frame, skip this many subsequent frames (default 0). + + + + V4L2_CID_MPEG_VIDEO_MUTE  + boolean + + "Mutes" the video to a +fixed color when capturing. This is useful for testing, to produce a +fixed video bitstream. 0 = unmuted, 1 = muted. + + + + V4L2_CID_MPEG_VIDEO_MUTE_YUV  + integer + Sets the "mute" color +of the video. The supplied 32-bit integer is interpreted as follows (bit +0 = least significant bit): + + + + + + Bit 0:7 + V chrominance information + + + Bit 8:15 + U chrominance information + + + Bit 16:23 + Y luminance information + + + Bit 24:31 + Must be zero. + + + + + + +
+
+ +
+ CX2341x MPEG Controls + + The following MPEG class controls deal with MPEG +encoding settings that are specific to the Conexant CX23415 and +CX23416 MPEG encoding chips. + + + CX2341x Control IDs + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE  + enum v4l2_mpeg_cx2341x_video_spatial_filter_mode + Sets the Spatial +Filter mode (default MANUAL). Possible values +are: + + + + + + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL  + Choose the filter manually + + + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO  + Choose the filter automatically + + + + + + + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER  + integer (0-15) + The setting for the +Spatial Filter. 0 = off, 15 = maximum. (Default is 0.) + + + + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE  + enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type + Select the algorithm +to use for the Luma Spatial Filter (default +1D_HOR). Possible values: + + + + + + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF  + No filter + + + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR  + One-dimensional horizontal + + + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT  + One-dimensional vertical + + + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE  + Two-dimensional separable + + + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE  + Two-dimensional symmetrical +non-separable + + + + + + + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE  + enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type + Select the algorithm +for the Chroma Spatial Filter (default 1D_HOR). +Possible values are: + + + + + + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF  + No filter + + + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR  + One-dimensional horizontal + + + + + + + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE  + enum v4l2_mpeg_cx2341x_video_temporal_filter_mode + Sets the Temporal +Filter mode (default MANUAL). Possible values +are: + + + + + + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL  + Choose the filter manually + + + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO  + Choose the filter automatically + + + + + + + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER  + integer (0-31) + The setting for the +Temporal Filter. 0 = off, 31 = maximum. (Default is 8 for full-scale +capturing and 0 for scaled capturing.) + + + + V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE  + enum v4l2_mpeg_cx2341x_video_median_filter_type + Median Filter Type +(default OFF). Possible values are: + + + + + + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF  + No filter + + + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR  + Horizontal filter + + + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT  + Vertical filter + + + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT  + Horizontal and vertical filter + + + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG  + Diagonal filter + + + + + + + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM  + integer (0-255) + Threshold above which +the luminance median filter is enabled (default 0) + + + + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP  + integer (0-255) + Threshold below which +the luminance median filter is enabled (default 255) + + + + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM  + integer (0-255) + Threshold above which +the chroma median filter is enabled (default 0) + + + + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP  + integer (0-255) + Threshold below which +the chroma median filter is enabled (default 255) + + + + V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS  + boolean + + The CX2341X MPEG encoder +can insert one empty MPEG-2 PES packet into the stream between every +four video frames. The packet size is 2048 bytes, including the +packet_start_code_prefix and stream_id fields. The stream_id is 0xBF +(private stream 2). The payload consists of 0x00 bytes, to be filled +in by the application. 0 = do not insert, 1 = insert packets. + + + +
+
+
+ +
+ Camera Control Reference + + The Camera class includes controls for mechanical (or +equivalent digital) features of a device such as controllable lenses +or sensors. + + + Camera Control IDs + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_CAMERA_CLASS  + class + The Camera class +descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a +description of this control class. + + + + + V4L2_CID_EXPOSURE_AUTO  + enum v4l2_exposure_auto_type + Enables automatic +adjustments of the exposure time and/or iris aperture. The effect of +manual changes of the exposure time or iris aperture while these +features are enabled is undefined, drivers should ignore such +requests. Possible values are: + + + + + + V4L2_EXPOSURE_AUTO  + Automatic exposure time, automatic iris +aperture. + + + V4L2_EXPOSURE_MANUAL  + Manual exposure time, manual iris. + + + V4L2_EXPOSURE_SHUTTER_PRIORITY  + Manual exposure time, auto iris. + + + V4L2_EXPOSURE_APERTURE_PRIORITY  + Auto exposure time, manual iris. + + + + + + + + V4L2_CID_EXPOSURE_ABSOLUTE  + integer + Determines the exposure +time of the camera sensor. The exposure time is limited by the frame +interval. Drivers should interpret the values as 100 µs units, +where the value 1 stands for 1/10000th of a second, 10000 for 1 second +and 100000 for 10 seconds. + + + + + V4L2_CID_EXPOSURE_AUTO_PRIORITY  + boolean + When +V4L2_CID_EXPOSURE_AUTO is set to +AUTO or APERTURE_PRIORITY, +this control determines if the device may dynamically vary the frame +rate. By default this feature is disabled (0) and the frame rate must +remain constant. + + + + + V4L2_CID_PAN_RELATIVE  + integer + This control turns the +camera horizontally by the specified amount. The unit is undefined. A +positive value moves the camera to the right (clockwise when viewed +from above), a negative value to the left. A value of zero does not +cause motion. This is a write-only control. + + + + + V4L2_CID_TILT_RELATIVE  + integer + This control turns the +camera vertically by the specified amount. The unit is undefined. A +positive value moves the camera up, a negative value down. A value of +zero does not cause motion. This is a write-only control. + + + + + V4L2_CID_PAN_RESET  + button + When this control is set, +the camera moves horizontally to the default position. + + + + + V4L2_CID_TILT_RESET  + button + When this control is set, +the camera moves vertically to the default position. + + + + + V4L2_CID_PAN_ABSOLUTE  + integer + This control +turns the camera horizontally to the specified position. Positive +values move the camera to the right (clockwise when viewed from above), +negative values to the left. Drivers should interpret the values as arc +seconds, with valid values between -180 * 3600 and +180 * 3600 +inclusive. + + + + + V4L2_CID_TILT_ABSOLUTE  + integer + This control +turns the camera vertically to the specified position. Positive values +move the camera up, negative values down. Drivers should interpret the +values as arc seconds, with valid values between -180 * 3600 and +180 +* 3600 inclusive. + + + + + V4L2_CID_FOCUS_ABSOLUTE  + integer + This control sets the +focal point of the camera to the specified position. The unit is +undefined. Positive values set the focus closer to the camera, +negative values towards infinity. + + + + + V4L2_CID_FOCUS_RELATIVE  + integer + This control moves the +focal point of the camera by the specified amount. The unit is +undefined. Positive values move the focus closer to the camera, +negative values towards infinity. This is a write-only control. + + + + + V4L2_CID_FOCUS_AUTO  + boolean + Enables automatic focus +adjustments. The effect of manual focus adjustments while this feature +is enabled is undefined, drivers should ignore such requests. + + + + + V4L2_CID_ZOOM_ABSOLUTE  + integer + Specify the objective lens +focal length as an absolute value. The zoom unit is driver-specific and its +value should be a positive integer. + + + + + V4L2_CID_ZOOM_RELATIVE  + integer + Specify the objective lens +focal length relatively to the current value. Positive values move the zoom +lens group towards the telephoto direction, negative values towards the +wide-angle direction. The zoom unit is driver-specific. This is a write-only control. + + + + + V4L2_CID_ZOOM_CONTINUOUS  + integer + Move the objective lens group +at the specified speed until it reaches physical device limits or until an +explicit request to stop the movement. A positive value moves the zoom lens +group towards the telephoto direction. A value of zero stops the zoom lens +group movement. A negative value moves the zoom lens group towards the +wide-angle direction. The zoom speed unit is driver-specific. + + + + + V4L2_CID_PRIVACY  + boolean + Prevent video from being acquired +by the camera. When this control is set to TRUE (1), no +image can be captured by the camera. Common means to enforce privacy are +mechanical obturation of the sensor and firmware image processing, but the +device is not restricted to these methods. Devices that implement the privacy +control must support read access and may support write access. + + + + V4L2_CID_BAND_STOP_FILTER  + integer + Switch the band-stop filter of a +camera sensor on or off, or specify its strength. Such band-stop filters can +be used, for example, to filter out the fluorescent light component. + + + + +
+
+ +
+ FM Transmitter Control Reference + + The FM Transmitter (FM_TX) class includes controls for common features of +FM transmissions capable devices. Currently this class includes parameters for audio +compression, pilot tone generation, audio deviation limiter, RDS transmission and +tuning power features. + + + FM_TX Control IDs + + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_FM_TX_CLASS  + class + The FM_TX class +descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a +description of this control class. + + + V4L2_CID_RDS_TX_DEVIATION  + integer + + Configures RDS signal frequency deviation level in Hz. +The range and step are driver-specific. + + + V4L2_CID_RDS_TX_PI  + integer + + Sets the RDS Programme Identification field +for transmission. + + + V4L2_CID_RDS_TX_PTY  + integer + + Sets the RDS Programme Type field for transmission. +This encodes up to 31 pre-defined programme types. + + + V4L2_CID_RDS_TX_PS_NAME  + string + + Sets the Programme Service name (PS_NAME) for transmission. +It is intended for static display on a receiver. It is the primary aid to listeners in programme service +identification and selection. In Annex E of , the RDS specification, +there is a full description of the correct character encoding for Programme Service name strings. +Also from RDS specification, PS is usually a single eight character text. However, it is also possible +to find receivers which can scroll strings sized as 8 x N characters. So, this control must be configured +with steps of 8 characters. The result is it must always contain a string with size multiple of 8. + + + V4L2_CID_RDS_TX_RADIO_TEXT  + string + + Sets the Radio Text info for transmission. It is a textual description of +what is being broadcasted. RDS Radio Text can be applied when broadcaster wishes to transmit longer PS names, +programme-related information or any other text. In these cases, RadioText should be used in addition to +V4L2_CID_RDS_TX_PS_NAME. The encoding for Radio Text strings is also fully described +in Annex E of . The length of Radio Text strings depends on which RDS Block is being +used to transmit it, either 32 (2A block) or 64 (2B block). However, it is also possible +to find receivers which can scroll strings sized as 32 x N or 64 x N characters. So, this control must be configured +with steps of 32 or 64 characters. The result is it must always contain a string with size multiple of 32 or 64. + + + V4L2_CID_AUDIO_LIMITER_ENABLED  + boolean + + Enables or disables the audio deviation limiter feature. +The limiter is useful when trying to maximize the audio volume, minimize receiver-generated +distortion and prevent overmodulation. + + + + V4L2_CID_AUDIO_LIMITER_RELEASE_TIME  + integer + + Sets the audio deviation limiter feature release time. +Unit is in useconds. Step and range are driver-specific. + + + V4L2_CID_AUDIO_LIMITER_DEVIATION  + integer + + Configures audio frequency deviation level in Hz. +The range and step are driver-specific. + + + V4L2_CID_AUDIO_COMPRESSION_ENABLED  + boolean + + Enables or disables the audio compression feature. +This feature amplifies signals below the threshold by a fixed gain and compresses audio +signals above the threshold by the ratio of Threshold/(Gain + Threshold). + + + V4L2_CID_AUDIO_COMPRESSION_GAIN  + integer + + Sets the gain for audio compression feature. It is +a dB value. The range and step are driver-specific. + + + V4L2_CID_AUDIO_COMPRESSION_THRESHOLD  + integer + + Sets the threshold level for audio compression freature. +It is a dB value. The range and step are driver-specific. + + + V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME  + integer + + Sets the attack time for audio compression feature. +It is a useconds value. The range and step are driver-specific. + + + V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME  + integer + + Sets the release time for audio compression feature. +It is a useconds value. The range and step are driver-specific. + + + V4L2_CID_PILOT_TONE_ENABLED  + boolean + + Enables or disables the pilot tone generation feature. + + + V4L2_CID_PILOT_TONE_DEVIATION  + integer + + Configures pilot tone frequency deviation level. Unit is +in Hz. The range and step are driver-specific. + + + V4L2_CID_PILOT_TONE_FREQUENCY  + integer + + Configures pilot tone frequency value. Unit is +in Hz. The range and step are driver-specific. + + + V4L2_CID_TUNE_PREEMPHASIS  + integer + + Configures the pre-emphasis value for broadcasting. +A pre-emphasis filter is applied to the broadcast to accentuate the high audio frequencies. +Depending on the region, a time constant of either 50 or 75 useconds is used. The enum v4l2_preemphasis +defines possible values for pre-emphasis. Here they are: + + + + + V4L2_PREEMPHASIS_DISABLED  + No pre-emphasis is applied. + + + V4L2_PREEMPHASIS_50_uS  + A pre-emphasis of 50 uS is used. + + + V4L2_PREEMPHASIS_75_uS  + A pre-emphasis of 75 uS is used. + + + + + + + V4L2_CID_TUNE_POWER_LEVEL  + integer + + Sets the output power level for signal transmission. +Unit is in dBuV. Range and step are driver-specific. + + + V4L2_CID_TUNE_ANTENNA_CAPACITOR  + integer + + This selects the value of antenna tuning capacitor +manually or automatically if set to zero. Unit, range and step are driver-specific. + + + + +
+ +For more details about RDS specification, refer to + document, from CENELEC. +
+
+ + diff --git a/Documentation/DocBook/v4l/crop.gif b/Documentation/DocBook/v4l/crop.gif new file mode 100644 index 00000000000..3b9e7d836d4 Binary files /dev/null and b/Documentation/DocBook/v4l/crop.gif differ diff --git a/Documentation/DocBook/v4l/crop.pdf b/Documentation/DocBook/v4l/crop.pdf new file mode 100644 index 00000000000..c9fb81cd32f Binary files /dev/null and b/Documentation/DocBook/v4l/crop.pdf differ diff --git a/Documentation/DocBook/v4l/dev-capture.xml b/Documentation/DocBook/v4l/dev-capture.xml new file mode 100644 index 00000000000..32807e43f17 --- /dev/null +++ b/Documentation/DocBook/v4l/dev-capture.xml @@ -0,0 +1,115 @@ + Video Capture Interface + + Video capture devices sample an analog video signal and store +the digitized images in memory. Today nearly all devices can capture +at full 25 or 30 frames/second. With this interface applications can +control the capture process and move images from the driver into user +space. + + Conventionally V4L2 video capture devices are accessed through +character device special files named /dev/video +and /dev/video0 to +/dev/video63 with major number 81 and minor +numbers 0 to 63. /dev/video is typically a +symbolic link to the preferred video device. Note the same device +files are used for video output devices. + +
+ Querying Capabilities + + Devices supporting the video capture interface set the +V4L2_CAP_VIDEO_CAPTURE flag in the +capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl. As secondary device functions +they may also support the video overlay +(V4L2_CAP_VIDEO_OVERLAY) and the raw VBI capture +(V4L2_CAP_VBI_CAPTURE) interface. At least one of +the read/write or streaming I/O methods must be supported. Tuners and +audio inputs are optional. +
+ +
+ Supplemental Functions + + Video capture devices shall support audio input, tuner, controls, +cropping and scaling and streaming parameter ioctls as needed. +The video input and video standard ioctls must be supported by +all video capture devices. +
+ +
+ Image Format Negotiation + + The result of a capture operation is determined by +cropping and image format parameters. The former select an area of the +video picture to capture, the latter how images are stored in memory, +&ie; in RGB or YUV format, the number of bits per pixel or width and +height. Together they also define how images are scaled in the +process. + + As usual these parameters are not reset +at &func-open; time to permit Unix tool chains, programming a device +and then reading from it as if it was a plain file. Well written V4L2 +applications ensure they really get what they want, including cropping +and scaling. + + Cropping initialization at minimum requires to reset the +parameters to defaults. An example is given in . + + To query the current image format applications set the +type field of a &v4l2-format; to +V4L2_BUF_TYPE_VIDEO_CAPTURE and call the +&VIDIOC-G-FMT; ioctl with a pointer to this structure. Drivers fill +the &v4l2-pix-format; pix member of the +fmt union. + + To request different parameters applications set the +type field of a &v4l2-format; as above and +initialize all fields of the &v4l2-pix-format; +vbi member of the +fmt union, or better just modify the +results of VIDIOC_G_FMT, and call the +&VIDIOC-S-FMT; ioctl with a pointer to this structure. Drivers may +adjust the parameters and finally return the actual parameters as +VIDIOC_G_FMT does. + + Like VIDIOC_S_FMT the +&VIDIOC-TRY-FMT; ioctl can be used to learn about hardware limitations +without disabling I/O or possibly time consuming hardware +preparations. + + The contents of &v4l2-pix-format; are discussed in . See also the specification of the +VIDIOC_G_FMT, VIDIOC_S_FMT +and VIDIOC_TRY_FMT ioctls for details. Video +capture devices must implement both the +VIDIOC_G_FMT and +VIDIOC_S_FMT ioctl, even if +VIDIOC_S_FMT ignores all requests and always +returns default parameters as VIDIOC_G_FMT does. +VIDIOC_TRY_FMT is optional. +
+ +
+ Reading Images + + A video capture device may support the read() function and/or streaming (memory mapping or user pointer) I/O. See for details. +
+ + diff --git a/Documentation/DocBook/v4l/dev-codec.xml b/Documentation/DocBook/v4l/dev-codec.xml new file mode 100644 index 00000000000..6e156dc45b9 --- /dev/null +++ b/Documentation/DocBook/v4l/dev-codec.xml @@ -0,0 +1,26 @@ + Codec Interface + + + Suspended + + This interface has been be suspended from the V4L2 API +implemented in Linux 2.6 until we have more experience with codec +device interfaces. + + + A V4L2 codec can compress, decompress, transform, or otherwise +convert video data from one format into another format, in memory. +Applications send data to be converted to the driver through a +&func-write; call, and receive the converted data through a +&func-read; call. For efficiency a driver may also support streaming +I/O. + + [to do] + + diff --git a/Documentation/DocBook/v4l/dev-effect.xml b/Documentation/DocBook/v4l/dev-effect.xml new file mode 100644 index 00000000000..9c243beba0e --- /dev/null +++ b/Documentation/DocBook/v4l/dev-effect.xml @@ -0,0 +1,25 @@ + Effect Devices Interface + + + Suspended + + This interface has been be suspended from the V4L2 API +implemented in Linux 2.6 until we have more experience with effect +device interfaces. + + + A V4L2 video effect device can do image effects, filtering, or +combine two or more images or image streams. For example video +transitions or wipes. Applications send data to be processed and +receive the result data either with &func-read; and &func-write; +functions, or through the streaming I/O mechanism. + + [to do] + + diff --git a/Documentation/DocBook/v4l/dev-osd.xml b/Documentation/DocBook/v4l/dev-osd.xml new file mode 100644 index 00000000000..c9a68a2ccd3 --- /dev/null +++ b/Documentation/DocBook/v4l/dev-osd.xml @@ -0,0 +1,164 @@ + Video Output Overlay Interface + Also known as On-Screen Display (OSD) + + + Experimental + + This is an experimental +interface and may change in the future. + + + Some video output devices can overlay a framebuffer image onto +the outgoing video signal. Applications can set up such an overlay +using this interface, which borrows structures and ioctls of the Video Overlay interface. + + The OSD function is accessible through the same character +special file as the Video Output function. +Note the default function of such a /dev/video device +is video capturing or output. The OSD function is only available after +calling the &VIDIOC-S-FMT; ioctl. + +
+ Querying Capabilities + + Devices supporting the Video Output +Overlay interface set the +V4L2_CAP_VIDEO_OUTPUT_OVERLAY flag in the +capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl. +
+ +
+ Framebuffer + + Contrary to the Video Overlay +interface the framebuffer is normally implemented on the TV card and +not the graphics card. On Linux it is accessible as a framebuffer +device (/dev/fbN). Given a V4L2 device, +applications can find the corresponding framebuffer device by calling +the &VIDIOC-G-FBUF; ioctl. It returns, amongst other information, the +physical address of the framebuffer in the +base field of &v4l2-framebuffer;. The +framebuffer device ioctl FBIOGET_FSCREENINFO +returns the same address in the smem_start +field of struct fb_fix_screeninfo. The +FBIOGET_FSCREENINFO ioctl and struct +fb_fix_screeninfo are defined in the +linux/fb.h header file. + + The width and height of the framebuffer depends on the +current video standard. A V4L2 driver may reject attempts to change +the video standard (or any other ioctl which would imply a framebuffer +size change) with an &EBUSY; until all applications closed the +framebuffer device. + + + Finding a framebuffer device for OSD + + +#include <linux/fb.h> + +&v4l2-framebuffer; fbuf; +unsigned int i; +int fb_fd; + +if (-1 == ioctl (fd, VIDIOC_G_FBUF, &fbuf)) { + perror ("VIDIOC_G_FBUF"); + exit (EXIT_FAILURE); +} + +for (i = 0; i > 30; ++i) { + char dev_name[16]; + struct fb_fix_screeninfo si; + + snprintf (dev_name, sizeof (dev_name), "/dev/fb%u", i); + + fb_fd = open (dev_name, O_RDWR); + if (-1 == fb_fd) { + switch (errno) { + case ENOENT: /* no such file */ + case ENXIO: /* no driver */ + continue; + + default: + perror ("open"); + exit (EXIT_FAILURE); + } + } + + if (0 == ioctl (fb_fd, FBIOGET_FSCREENINFO, &si)) { + if (si.smem_start == (unsigned long) fbuf.base) + break; + } else { + /* Apparently not a framebuffer device. */ + } + + close (fb_fd); + fb_fd = -1; +} + +/* fb_fd is the file descriptor of the framebuffer device + for the video output overlay, or -1 if no device was found. */ + + +
+ +
+ Overlay Window and Scaling + + The overlay is controlled by source and target rectangles. +The source rectangle selects a subsection of the framebuffer image to +be overlaid, the target rectangle an area in the outgoing video signal +where the image will appear. Drivers may or may not support scaling, +and arbitrary sizes and positions of these rectangles. Further drivers +may support any (or none) of the clipping/blending methods defined for +the Video Overlay interface. + + A &v4l2-window; defines the size of the source rectangle, +its position in the framebuffer and the clipping/blending method to be +used for the overlay. To get the current parameters applications set +the type field of a &v4l2-format; to +V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY and call the +&VIDIOC-G-FMT; ioctl. The driver fills the +v4l2_window substructure named +win. It is not possible to retrieve a +previously programmed clipping list or bitmap. + + To program the source rectangle applications set the +type field of a &v4l2-format; to +V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY, initialize +the win substructure and call the +&VIDIOC-S-FMT; ioctl. The driver adjusts the parameters against +hardware limits and returns the actual parameters as +VIDIOC_G_FMT does. Like +VIDIOC_S_FMT, the &VIDIOC-TRY-FMT; ioctl can be +used to learn about driver capabilities without actually changing +driver state. Unlike VIDIOC_S_FMT this also works +after the overlay has been enabled. + + A &v4l2-crop; defines the size and position of the target +rectangle. The scaling factor of the overlay is implied by the width +and height given in &v4l2-window; and &v4l2-crop;. The cropping API +applies to Video Output and Video +Output Overlay devices in the same way as to +Video Capture and Video +Overlay devices, merely reversing the direction of the +data flow. For more information see . +
+ +
+ Enabling Overlay + + There is no V4L2 ioctl to enable or disable the overlay, +however the framebuffer interface of the driver may support the +FBIOBLANK ioctl. +
+ + diff --git a/Documentation/DocBook/v4l/dev-output.xml b/Documentation/DocBook/v4l/dev-output.xml new file mode 100644 index 00000000000..63c3c20e5a7 --- /dev/null +++ b/Documentation/DocBook/v4l/dev-output.xml @@ -0,0 +1,111 @@ + Video Output Interface + + Video output devices encode stills or image sequences as +analog video signal. With this interface applications can +control the encoding process and move images from user space to +the driver. + + Conventionally V4L2 video output devices are accessed through +character device special files named /dev/video +and /dev/video0 to +/dev/video63 with major number 81 and minor +numbers 0 to 63. /dev/video is typically a +symbolic link to the preferred video device. Note the same device +files are used for video capture devices. + +
+ Querying Capabilities + + Devices supporting the video output interface set the +V4L2_CAP_VIDEO_OUTPUT flag in the +capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl. As secondary device functions +they may also support the raw VBI +output (V4L2_CAP_VBI_OUTPUT) interface. At +least one of the read/write or streaming I/O methods must be +supported. Modulators and audio outputs are optional. +
+ +
+ Supplemental Functions + + Video output devices shall support audio output, modulator, controls, +cropping and scaling and streaming parameter ioctls as needed. +The video output and video standard ioctls must be supported by +all video output devices. +
+ +
+ Image Format Negotiation + + The output is determined by cropping and image format +parameters. The former select an area of the video picture where the +image will appear, the latter how images are stored in memory, &ie; in +RGB or YUV format, the number of bits per pixel or width and height. +Together they also define how images are scaled in the process. + + As usual these parameters are not reset +at &func-open; time to permit Unix tool chains, programming a device +and then writing to it as if it was a plain file. Well written V4L2 +applications ensure they really get what they want, including cropping +and scaling. + + Cropping initialization at minimum requires to reset the +parameters to defaults. An example is given in . + + To query the current image format applications set the +type field of a &v4l2-format; to +V4L2_BUF_TYPE_VIDEO_OUTPUT and call the +&VIDIOC-G-FMT; ioctl with a pointer to this structure. Drivers fill +the &v4l2-pix-format; pix member of the +fmt union. + + To request different parameters applications set the +type field of a &v4l2-format; as above and +initialize all fields of the &v4l2-pix-format; +vbi member of the +fmt union, or better just modify the +results of VIDIOC_G_FMT, and call the +&VIDIOC-S-FMT; ioctl with a pointer to this structure. Drivers may +adjust the parameters and finally return the actual parameters as +VIDIOC_G_FMT does. + + Like VIDIOC_S_FMT the +&VIDIOC-TRY-FMT; ioctl can be used to learn about hardware limitations +without disabling I/O or possibly time consuming hardware +preparations. + + The contents of &v4l2-pix-format; are discussed in . See also the specification of the +VIDIOC_G_FMT, VIDIOC_S_FMT +and VIDIOC_TRY_FMT ioctls for details. Video +output devices must implement both the +VIDIOC_G_FMT and +VIDIOC_S_FMT ioctl, even if +VIDIOC_S_FMT ignores all requests and always +returns default parameters as VIDIOC_G_FMT does. +VIDIOC_TRY_FMT is optional. +
+ +
+ Writing Images + + A video output device may support the write() function and/or streaming (memory mapping or user pointer) I/O. See for details. +
+ + diff --git a/Documentation/DocBook/v4l/dev-overlay.xml b/Documentation/DocBook/v4l/dev-overlay.xml new file mode 100644 index 00000000000..92513cf7915 --- /dev/null +++ b/Documentation/DocBook/v4l/dev-overlay.xml @@ -0,0 +1,379 @@ + Video Overlay Interface + Also known as Framebuffer Overlay or Previewing + + Video overlay devices have the ability to genlock (TV-)video +into the (VGA-)video signal of a graphics card, or to store captured +images directly in video memory of a graphics card, typically with +clipping. This can be considerable more efficient than capturing +images and displaying them by other means. In the old days when only +nuclear power plants needed cooling towers this used to be the only +way to put live video into a window. + + Video overlay devices are accessed through the same character +special files as video capture devices. +Note the default function of a /dev/video device +is video capturing. The overlay function is only available after +calling the &VIDIOC-S-FMT; ioctl. + + The driver may support simultaneous overlay and capturing +using the read/write and streaming I/O methods. If so, operation at +the nominal frame rate of the video standard is not guaranteed. Frames +may be directed away from overlay to capture, or one field may be used +for overlay and the other for capture if the capture parameters permit +this. + + Applications should use different file descriptors for +capturing and overlay. This must be supported by all drivers capable +of simultaneous capturing and overlay. Optionally these drivers may +also permit capturing and overlay with a single file descriptor for +compatibility with V4L and earlier versions of V4L2. + A common application of two file descriptors is the +XFree86 Xv/V4L interface driver and +a V4L2 application. While the X server controls video overlay, the +application can take advantage of memory mapping and DMA. + In the opinion of the designers of this API, no driver +writer taking the efforts to support simultaneous capturing and +overlay will restrict this ability by requiring a single file +descriptor, as in V4L and earlier versions of V4L2. Making this +optional means applications depending on two file descriptors need +backup routines to be compatible with all drivers, which is +considerable more work than using two fds in applications which do +not. Also two fd's fit the general concept of one file descriptor for +each logical stream. Hence as a complexity trade-off drivers +must support two file descriptors and +may support single fd operation. + + +
+ Querying Capabilities + + Devices supporting the video overlay interface set the +V4L2_CAP_VIDEO_OVERLAY flag in the +capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl. The overlay I/O method specified +below must be supported. Tuners and audio inputs are optional. +
+ +
+ Supplemental Functions + + Video overlay devices shall support audio input, tuner, controls, +cropping and scaling and streaming parameter ioctls as needed. +The video input and video standard ioctls must be supported by +all video overlay devices. +
+ +
+ Setup + + Before overlay can commence applications must program the +driver with frame buffer parameters, namely the address and size of +the frame buffer and the image format, for example RGB 5:6:5. The +&VIDIOC-G-FBUF; and &VIDIOC-S-FBUF; ioctls are available to get +and set these parameters, respectively. The +VIDIOC_S_FBUF ioctl is privileged because it +allows to set up DMA into physical memory, bypassing the memory +protection mechanisms of the kernel. Only the superuser can change the +frame buffer address and size. Users are not supposed to run TV +applications as root or with SUID bit set. A small helper application +with suitable privileges should query the graphics system and program +the V4L2 driver at the appropriate time. + + Some devices add the video overlay to the output signal +of the graphics card. In this case the frame buffer is not modified by +the video device, and the frame buffer address and pixel format are +not needed by the driver. The VIDIOC_S_FBUF ioctl +is not privileged. An application can check for this type of device by +calling the VIDIOC_G_FBUF ioctl. + + A driver may support any (or none) of five clipping/blending +methods: + + Chroma-keying displays the overlaid image only where +pixels in the primary graphics surface assume a certain color. + + + A bitmap can be specified where each bit corresponds +to a pixel in the overlaid image. When the bit is set, the +corresponding video pixel is displayed, otherwise a pixel of the +graphics surface. + + + A list of clipping rectangles can be specified. In +these regions no video is displayed, so the +graphics surface can be seen here. + + + The framebuffer has an alpha channel that can be used +to clip or blend the framebuffer with the video. + + + A global alpha value can be specified to blend the +framebuffer contents with video images. + + + + When simultaneous capturing and overlay is supported and +the hardware prohibits different image and frame buffer formats, the +format requested first takes precedence. The attempt to capture +(&VIDIOC-S-FMT;) or overlay (&VIDIOC-S-FBUF;) may fail with an +&EBUSY; or return accordingly modified parameters.. +
+ +
+ Overlay Window + + The overlaid image is determined by cropping and overlay +window parameters. The former select an area of the video picture to +capture, the latter how images are overlaid and clipped. Cropping +initialization at minimum requires to reset the parameters to +defaults. An example is given in . + + The overlay window is described by a &v4l2-window;. It +defines the size of the image, its position over the graphics surface +and the clipping to be applied. To get the current parameters +applications set the type field of a +&v4l2-format; to V4L2_BUF_TYPE_VIDEO_OVERLAY and +call the &VIDIOC-G-FMT; ioctl. The driver fills the +v4l2_window substructure named +win. It is not possible to retrieve a +previously programmed clipping list or bitmap. + + To program the overlay window applications set the +type field of a &v4l2-format; to +V4L2_BUF_TYPE_VIDEO_OVERLAY, initialize the +win substructure and call the +&VIDIOC-S-FMT; ioctl. The driver adjusts the parameters against +hardware limits and returns the actual parameters as +VIDIOC_G_FMT does. Like +VIDIOC_S_FMT, the &VIDIOC-TRY-FMT; ioctl can be +used to learn about driver capabilities without actually changing +driver state. Unlike VIDIOC_S_FMT this also works +after the overlay has been enabled. + + The scaling factor of the overlaid image is implied by the +width and height given in &v4l2-window; and the size of the cropping +rectangle. For more information see . + + When simultaneous capturing and overlay is supported and +the hardware prohibits different image and window sizes, the size +requested first takes precedence. The attempt to capture or overlay as +well (&VIDIOC-S-FMT;) may fail with an &EBUSY; or return accordingly +modified parameters. + + + struct <structname>v4l2_window</structname> + + &cs-str; + + + &v4l2-rect; + w + Size and position of the window relative to the +top, left corner of the frame buffer defined with &VIDIOC-S-FBUF;. The +window can extend the frame buffer width and height, the +x and y +coordinates can be negative, and it can lie completely outside the +frame buffer. The driver clips the window accordingly, or if that is +not possible, modifies its size and/or position. + + + &v4l2-field; + field + Applications set this field to determine which +video field shall be overlaid, typically one of +V4L2_FIELD_ANY (0), +V4L2_FIELD_TOP, +V4L2_FIELD_BOTTOM or +V4L2_FIELD_INTERLACED. Drivers may have to choose +a different field order and return the actual setting here. + + + __u32 + chromakey + When chroma-keying has been negotiated with +&VIDIOC-S-FBUF; applications set this field to the desired pixel value +for the chroma key. The format is the same as the pixel format of the +framebuffer (&v4l2-framebuffer; +fmt.pixelformat field), with bytes in host +order. E. g. for V4L2_PIX_FMT_BGR24 +the value should be 0xRRGGBB on a little endian, 0xBBGGRR on a big +endian host. + + + &v4l2-clip; * + clips + When chroma-keying has not +been negotiated and &VIDIOC-G-FBUF; indicated this capability, +applications can set this field to point to an array of +clipping rectangles. + + + + + Like the window coordinates +w, clipping rectangles are defined relative +to the top, left corner of the frame buffer. However clipping +rectangles must not extend the frame buffer width and height, and they +must not overlap. If possible applications should merge adjacent +rectangles. Whether this must create x-y or y-x bands, or the order of +rectangles, is not defined. When clip lists are not supported the +driver ignores this field. Its contents after calling &VIDIOC-S-FMT; +are undefined. + + + __u32 + clipcount + When the application set the +clips field, this field must contain the +number of clipping rectangles in the list. When clip lists are not +supported the driver ignores this field, its contents after calling +VIDIOC_S_FMT are undefined. When clip lists are +supported but no clipping is desired this field must be set to +zero. + + + void * + bitmap + When chroma-keying has +not been negotiated and &VIDIOC-G-FBUF; indicated +this capability, applications can set this field to point to a +clipping bit mask. + + + It must be of the same size +as the window, w.width and +w.height. Each bit corresponds to a pixel +in the overlaid image, which is displayed only when the bit is +set. Pixel coordinates translate to bits like: + +((__u8 *) bitmap)[w.width * y + x / 8] & (1 << (x & 7))where 0 ≤ x < +w.width and 0 ≤ +y <w.height. + Should we require + w.width to be a multiple of + eight? + When a clipping +bit mask is not supported the driver ignores this field, its contents +after calling &VIDIOC-S-FMT; are undefined. When a bit mask is supported +but no clipping is desired this field must be set to +NULL.Applications need not create a +clip list or bit mask. When they pass both, or despite negotiating +chroma-keying, the results are undefined. Regardless of the chosen +method, the clipping abilities of the hardware may be limited in +quantity or quality. The results when these limits are exceeded are +undefined. + When the image is written into frame buffer +memory it will be undesirable if the driver clips out less pixels +than expected, because the application and graphics system are not +aware these regions need to be refreshed. The driver should clip out +more pixels or not write the image at all. + + + + __u8 + global_alpha + The global alpha value used to blend the +framebuffer with video images, if global alpha blending has been +negotiated (V4L2_FBUF_FLAG_GLOBAL_ALPHA, see +&VIDIOC-S-FBUF;, ). + + + + + Note this field was added in Linux 2.6.23, extending the structure. However +the VIDIOC_G/S/TRY_FMT ioctls, +which take a pointer to a v4l2_format parent structure with padding +bytes at the end, are not affected. + + + +
+ + + struct <structname>v4l2_clip</structname><footnote> + <para>The X Window system defines "regions" which are +vectors of struct BoxRec { short x1, y1, x2, y2; } with width = x2 - +x1 and height = y2 - y1, so one cannot pass X11 clip lists +directly.</para> + </footnote> + + &cs-str; + + + &v4l2-rect; + c + Coordinates of the clipping rectangle, relative to +the top, left corner of the frame buffer. Only window pixels +outside all clipping rectangles are +displayed. + + + &v4l2-clip; * + next + Pointer to the next clipping rectangle, NULL when +this is the last rectangle. Drivers ignore this field, it cannot be +used to pass a linked list of clipping rectangles. + + + +
+ + + + + struct <structname>v4l2_rect</structname> + + &cs-str; + + + __s32 + left + Horizontal offset of the top, left corner of the +rectangle, in pixels. + + + __s32 + top + Vertical offset of the top, left corner of the +rectangle, in pixels. Offsets increase to the right and down. + + + __s32 + width + Width of the rectangle, in pixels. + + + __s32 + height + Height of the rectangle, in pixels. Width and +height cannot be negative, the fields are signed for hysterical +reasons. + + + +
+
+ +
+ Enabling Overlay + + To start or stop the frame buffer overlay applications call +the &VIDIOC-OVERLAY; ioctl. +
+ + diff --git a/Documentation/DocBook/v4l/dev-radio.xml b/Documentation/DocBook/v4l/dev-radio.xml new file mode 100644 index 00000000000..73aa90b45b3 --- /dev/null +++ b/Documentation/DocBook/v4l/dev-radio.xml @@ -0,0 +1,57 @@ + Radio Interface + + This interface is intended for AM and FM (analog) radio +receivers and transmitters. + + Conventionally V4L2 radio devices are accessed through +character device special files named /dev/radio +and /dev/radio0 to +/dev/radio63 with major number 81 and minor +numbers 64 to 127. + +
+ Querying Capabilities + + Devices supporting the radio interface set the +V4L2_CAP_RADIO and +V4L2_CAP_TUNER or +V4L2_CAP_MODULATOR flag in the +capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl. Other combinations of +capability flags are reserved for future extensions. +
+ +
+ Supplemental Functions + + Radio devices can support controls, and must support the tuner or modulator ioctls. + + They do not support the video input or output, audio input +or output, video standard, cropping and scaling, compression and +streaming parameter, or overlay ioctls. All other ioctls and I/O +methods are reserved for future extensions. +
+ +
+ Programming + + Radio devices may have a couple audio controls (as discussed +in ) such as a volume control, possibly custom +controls. Further all radio devices have one tuner or modulator (these are +discussed in ) with index number zero to select +the radio frequency and to determine if a monaural or FM stereo +program is received/emitted. Drivers switch automatically between AM and FM +depending on the selected frequency. The &VIDIOC-G-TUNER; or +&VIDIOC-G-MODULATOR; ioctl +reports the supported frequency range. +
+ + diff --git a/Documentation/DocBook/v4l/dev-raw-vbi.xml b/Documentation/DocBook/v4l/dev-raw-vbi.xml new file mode 100644 index 00000000000..c5a70bdfaf2 --- /dev/null +++ b/Documentation/DocBook/v4l/dev-raw-vbi.xml @@ -0,0 +1,347 @@ + Raw VBI Data Interface + + VBI is an abbreviation of Vertical Blanking Interval, a gap +in the sequence of lines of an analog video signal. During VBI +no picture information is transmitted, allowing some time while the +electron beam of a cathode ray tube TV returns to the top of the +screen. Using an oscilloscope you will find here the vertical +synchronization pulses and short data packages ASK +modulatedASK: Amplitude-Shift Keying. A high signal +level represents a '1' bit, a low level a '0' bit. +onto the video signal. These are transmissions of services such as +Teletext or Closed Caption. + + Subject of this interface type is raw VBI data, as sampled off +a video signal, or to be added to a signal for output. +The data format is similar to uncompressed video images, a number of +lines times a number of samples per line, we call this a VBI image. + + Conventionally V4L2 VBI devices are accessed through character +device special files named /dev/vbi and +/dev/vbi0 to /dev/vbi31 with +major number 81 and minor numbers 224 to 255. +/dev/vbi is typically a symbolic link to the +preferred VBI device. This convention applies to both input and output +devices. + + To address the problems of finding related video and VBI +devices VBI capturing and output is also available as device function +under /dev/video. To capture or output raw VBI +data with these devices applications must call the &VIDIOC-S-FMT; +ioctl. Accessed as /dev/vbi, raw VBI capturing +or output is the default device function. + +
+ Querying Capabilities + + Devices supporting the raw VBI capturing or output API set +the V4L2_CAP_VBI_CAPTURE or +V4L2_CAP_VBI_OUTPUT flags, respectively, in the +capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl. At least one of the +read/write, streaming or asynchronous I/O methods must be +supported. VBI devices may or may not have a tuner or modulator. +
+ +
+ Supplemental Functions + + VBI devices shall support video +input or output, tuner or +modulator, and controls ioctls +as needed. The video standard ioctls provide +information vital to program a VBI device, therefore must be +supported. +
+ +
+ Raw VBI Format Negotiation + + Raw VBI sampling abilities can vary, in particular the +sampling frequency. To properly interpret the data V4L2 specifies an +ioctl to query the sampling parameters. Moreover, to allow for some +flexibility applications can also suggest different parameters. + + As usual these parameters are not +reset at &func-open; time to permit Unix tool chains, programming a +device and then reading from it as if it was a plain file. Well +written V4L2 applications should always ensure they really get what +they want, requesting reasonable parameters and then checking if the +actual parameters are suitable. + + To query the current raw VBI capture parameters +applications set the type field of a +&v4l2-format; to V4L2_BUF_TYPE_VBI_CAPTURE or +V4L2_BUF_TYPE_VBI_OUTPUT, and call the +&VIDIOC-G-FMT; ioctl with a pointer to this structure. Drivers fill +the &v4l2-vbi-format; vbi member of the +fmt union. + + To request different parameters applications set the +type field of a &v4l2-format; as above and +initialize all fields of the &v4l2-vbi-format; +vbi member of the +fmt union, or better just modify the +results of VIDIOC_G_FMT, and call the +&VIDIOC-S-FMT; ioctl with a pointer to this structure. Drivers return +an &EINVAL; only when the given parameters are ambiguous, otherwise +they modify the parameters according to the hardware capabilites and +return the actual parameters. When the driver allocates resources at +this point, it may return an &EBUSY; to indicate the returned +parameters are valid but the required resources are currently not +available. That may happen for instance when the video and VBI areas +to capture would overlap, or when the driver supports multiple opens +and another process already requested VBI capturing or output. Anyway, +applications must expect other resource allocation points which may +return EBUSY, at the &VIDIOC-STREAMON; ioctl +and the first read(), write() and select() call. + + VBI devices must implement both the +VIDIOC_G_FMT and +VIDIOC_S_FMT ioctl, even if +VIDIOC_S_FMT ignores all requests and always +returns default parameters as VIDIOC_G_FMT does. +VIDIOC_TRY_FMT is optional. + + + struct <structname>v4l2_vbi_format</structname> + + &cs-str; + + + __u32 + sampling_rate + Samples per second, i. e. unit 1 Hz. + + + __u32 + offset + Horizontal offset of the VBI image, +relative to the leading edge of the line synchronization pulse and +counted in samples: The first sample in the VBI image will be located +offset / +sampling_rate seconds following the leading +edge. See also . + + + __u32 + samples_per_line + + + + __u32 + sample_format + Defines the sample format as in , a four-character-code. + A few devices may be unable to +sample VBI data at all but can extend the video capture window to the +VBI region. + Usually this is +V4L2_PIX_FMT_GREY, i. e. each sample +consists of 8 bits with lower values oriented towards the black level. +Do not assume any other correlation of values with the signal level. +For example, the MSB does not necessarily indicate if the signal is +'high' or 'low' because 128 may not be the mean value of the +signal. Drivers shall not convert the sample format by software. + + + __u32 + start[2] + This is the scanning system line number +associated with the first line of the VBI image, of the first and the +second field respectively. See and + for valid values. VBI input drivers can +return start values 0 if the hardware cannot reliable identify +scanning lines, VBI acquisition may not require this +information. + + + __u32 + count[2] + The number of lines in the first and second +field image, respectively. + + + Drivers should be as +flexibility as possible. For example, it may be possible to extend or +move the VBI capture window down to the picture area, implementing a +'full field mode' to capture data service transmissions embedded in +the picture.An application can set the first or second +count value to zero if no data is required +from the respective field; count[1] if the +scanning system is progressive, &ie; not interlaced. The +corresponding start value shall be ignored by the application and +driver. Anyway, drivers may not support single field capturing and +return both count values non-zero.Both +count values set to zero, or line numbers +outside the bounds depicted in and , or a field image covering +lines of two fields, are invalid and shall not be returned by the +driver.To initialize the start +and count fields, applications must first +determine the current video standard selection. The &v4l2-std-id; or +the framelines field of &v4l2-standard; can +be evaluated for this purpose. + + + __u32 + flags + See below. Currently +only drivers set flags, applications must set this field to +zero. + + + __u32 + reserved[2] + This array is reserved for future extensions. +Drivers and applications must set it to zero. + + + +
+ + + Raw VBI Format Flags + + &cs-def; + + + V4L2_VBI_UNSYNC + 0x0001 + This flag indicates hardware which does not +properly distinguish between fields. Normally the VBI image stores the +first field (lower scanning line numbers) first in memory. This may be +a top or bottom field depending on the video standard. When this flag +is set the first or second field may be stored first, however the +fields are still in correct temporal order with the older field first +in memory. + Most VBI services transmit on both fields, but +some have different semantics depending on the field number. These +cannot be reliable decoded or encoded when +V4L2_VBI_UNSYNC is set. + + + + V4L2_VBI_INTERLACED + 0x0002 + By default the two field images will be passed +sequentially; all lines of the first field followed by all lines of +the second field (compare +V4L2_FIELD_SEQ_TB and +V4L2_FIELD_SEQ_BT, whether the top or bottom +field is first in memory depends on the video standard). When this +flag is set, the two fields are interlaced (cf. +V4L2_FIELD_INTERLACED). The first line of the +first field followed by the first line of the second field, then the +two second lines, and so on. Such a layout may be necessary when the +hardware has been programmed to capture or output interlaced video +images and is unable to separate the fields for VBI capturing at +the same time. For simplicity setting this flag implies that both +count values are equal and non-zero. + + + +
+ +
+ Line synchronization + + + + + + + + + Line synchronization diagram + + +
+ +
+ ITU-R 525 line numbering (M/NTSC and M/PAL) + + + + + + + + + NTSC field synchronization diagram + + + (1) For the purpose of this specification field 2 +starts in line 264 and not 263.5 because half line capturing is not +supported. + + +
+ +
+ ITU-R 625 line numbering + + + + + + + + + PAL/SECAM field synchronization diagram + + + (1) For the purpose of this specification field 2 +starts in line 314 and not 313.5 because half line capturing is not +supported. + + +
+ + Remember the VBI image format depends on the selected +video standard, therefore the application must choose a new standard or +query the current standard first. Attempts to read or write data ahead +of format negotiation, or after switching the video standard which may +invalidate the negotiated VBI parameters, should be refused by the +driver. A format change during active I/O is not permitted. +
+ +
+ Reading and writing VBI images + + To assure synchronization with the field number and easier +implementation, the smallest unit of data passed at a time is one +frame, consisting of two fields of VBI images immediately following in +memory. + + The total size of a frame computes as follows: + + +(count[0] + count[1]) * +samples_per_line * sample size in bytes + + The sample size is most likely always one byte, +applications must check the sample_format +field though, to function properly with other drivers. + + A VBI device may support read/write and/or streaming (memory mapping or user pointer) I/O. The latter bears the +possibility of synchronizing video and +VBI data by using buffer timestamps. + + Remember the &VIDIOC-STREAMON; ioctl and the first read(), +write() and select() call can be resource allocation points returning +an &EBUSY; if the required hardware resources are temporarily +unavailable, for example the device is already in use by another +process. +
+ + diff --git a/Documentation/DocBook/v4l/dev-rds.xml b/Documentation/DocBook/v4l/dev-rds.xml new file mode 100644 index 00000000000..0869d701b1e --- /dev/null +++ b/Documentation/DocBook/v4l/dev-rds.xml @@ -0,0 +1,168 @@ + RDS Interface + + The Radio Data System transmits supplementary +information in binary format, for example the station name or travel +information, on an inaudible audio subcarrier of a radio program. This +interface is aimed at devices capable of receiving and decoding RDS +information. + + For more information see the core RDS standard +and the RBDS standard . + + Note that the RBDS standard as is used in the USA is almost identical +to the RDS standard. Any RDS decoder can also handle RBDS. Only some of the fields +have slightly different meanings. See the RBDS standard for more information. + + The RBDS standard also specifies support for MMBS (Modified Mobile Search). +This is a proprietary format which seems to be discontinued. The RDS interface does not +support this format. Should support for MMBS (or the so-called 'E blocks' in general) +be needed, then please contact the linux-media mailing list: &v4l-ml;. + +
+ Querying Capabilities + + Devices supporting the RDS capturing API +set the V4L2_CAP_RDS_CAPTURE flag in +the capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl. +Any tuner that supports RDS will set the +V4L2_TUNER_CAP_RDS flag in the capability +field of &v4l2-tuner;. +Whether an RDS signal is present can be detected by looking at +the rxsubchans field of &v4l2-tuner;: the +V4L2_TUNER_SUB_RDS will be set if RDS data was detected. + + Devices supporting the RDS output API +set the V4L2_CAP_RDS_OUTPUT flag in +the capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl. +Any modulator that supports RDS will set the +V4L2_TUNER_CAP_RDS flag in the capability +field of &v4l2-modulator;. +In order to enable the RDS transmission one must set the V4L2_TUNER_SUB_RDS +bit in the txsubchans field of &v4l2-modulator;. + +
+ +
+ Reading RDS data + + RDS data can be read from the radio device +with the &func-read; function. The data is packed in groups of three bytes, +as follows: + + struct +<structname>v4l2_rds_data</structname> + + + + + + + __u8 + lsb + Least Significant Byte of RDS Block + + + __u8 + msb + Most Significant Byte of RDS Block + + + __u8 + block + Block description + + + +
+ + Block description + + + + + + Bits 0-2 + Block (aka offset) of the received data. + + + Bits 3-5 + Deprecated. Currently identical to bits 0-2. Do not use these bits. + + + Bit 6 + Corrected bit. Indicates that an error was corrected for this data block. + + + Bit 7 + Error bit. Indicates that an uncorrectable error occurred during reception of this block. + + + +
+ + + Block defines + + + + + + + V4L2_RDS_BLOCK_MSK + 7 + Mask for bits 0-2 to get the block ID. + + + V4L2_RDS_BLOCK_A + 0 + Block A. + + + V4L2_RDS_BLOCK_B + 1 + Block B. + + + V4L2_RDS_BLOCK_C + 2 + Block C. + + + V4L2_RDS_BLOCK_D + 3 + Block D. + + + V4L2_RDS_BLOCK_C_ALT + 4 + Block C'. + + + V4L2_RDS_BLOCK_INVALID + 7 + An invalid block. + + + V4L2_RDS_BLOCK_CORRECTED + 0x40 + A bit error was detected but corrected. + + + V4L2_RDS_BLOCK_ERROR + 0x80 + An incorrectable error occurred. + + + +
+
+ + diff --git a/Documentation/DocBook/v4l/dev-sliced-vbi.xml b/Documentation/DocBook/v4l/dev-sliced-vbi.xml new file mode 100644 index 00000000000..69e789fa7f7 --- /dev/null +++ b/Documentation/DocBook/v4l/dev-sliced-vbi.xml @@ -0,0 +1,708 @@ + Sliced VBI Data Interface + + VBI stands for Vertical Blanking Interval, a gap in the +sequence of lines of an analog video signal. During VBI no picture +information is transmitted, allowing some time while the electron beam +of a cathode ray tube TV returns to the top of the screen. + + Sliced VBI devices use hardware to demodulate data transmitted +in the VBI. V4L2 drivers shall not do this by +software, see also the raw VBI +interface. The data is passed as short packets of fixed size, +covering one scan line each. The number of packets per video frame is +variable. + + Sliced VBI capture and output devices are accessed through the +same character special files as raw VBI devices. When a driver +supports both interfaces, the default function of a +/dev/vbi device is raw VBI +capturing or output, and the sliced VBI function is only available +after calling the &VIDIOC-S-FMT; ioctl as defined below. Likewise a +/dev/video device may support the sliced VBI API, +however the default function here is video capturing or output. +Different file descriptors must be used to pass raw and sliced VBI +data simultaneously, if this is supported by the driver. + +
+ Querying Capabilities + + Devices supporting the sliced VBI capturing or output API +set the V4L2_CAP_SLICED_VBI_CAPTURE or +V4L2_CAP_SLICED_VBI_OUTPUT flag respectively, in +the capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl. At least one of the +read/write, streaming or asynchronous I/O +methods must be supported. Sliced VBI devices may have a tuner +or modulator. +
+ +
+ Supplemental Functions + + Sliced VBI devices shall support video +input or output and tuner or +modulator ioctls if they have these capabilities, and they may +support control ioctls. The video standard ioctls provide information +vital to program a sliced VBI device, therefore must be +supported. +
+ +
+ Sliced VBI Format Negotiation + + To find out which data services are supported by the +hardware applications can call the &VIDIOC-G-SLICED-VBI-CAP; ioctl. +All drivers implementing the sliced VBI interface must support this +ioctl. The results may differ from those of the &VIDIOC-S-FMT; ioctl +when the number of VBI lines the hardware can capture or output per +frame, or the number of services it can identify on a given line are +limited. For example on PAL line 16 the hardware may be able to look +for a VPS or Teletext signal, but not both at the same time. + + To determine the currently selected services applications +set the type field of &v4l2-format; to + V4L2_BUF_TYPE_SLICED_VBI_CAPTURE or +V4L2_BUF_TYPE_SLICED_VBI_OUTPUT, and the &VIDIOC-G-FMT; +ioctl fills the fmt.sliced member, a +&v4l2-sliced-vbi-format;. + + Applications can request different parameters by +initializing or modifying the fmt.sliced +member and calling the &VIDIOC-S-FMT; ioctl with a pointer to the +v4l2_format structure. + + The sliced VBI API is more complicated than the raw VBI API +because the hardware must be told which VBI service to expect on each +scan line. Not all services may be supported by the hardware on all +lines (this is especially true for VBI output where Teletext is often +unsupported and other services can only be inserted in one specific +line). In many cases, however, it is sufficient to just set the +service_set field to the required services +and let the driver fill the service_lines +array according to hardware capabilities. Only if more precise control +is needed should the programmer set the +service_lines array explicitly. + + The &VIDIOC-S-FMT; ioctl modifies the parameters +according to hardware capabilities. When the driver allocates +resources at this point, it may return an &EBUSY; if the required +resources are temporarily unavailable. Other resource allocation +points which may return EBUSY can be the +&VIDIOC-STREAMON; ioctl and the first &func-read;, &func-write; and +&func-select; call. + + + struct +<structname>v4l2_sliced_vbi_format</structname> + + + + + + + + + + __u32 + service_set + If +service_set is non-zero when passed with +&VIDIOC-S-FMT; or &VIDIOC-TRY-FMT;, the +service_lines array will be filled by the +driver according to the services specified in this field. For example, +if service_set is initialized with +V4L2_SLICED_TELETEXT_B | V4L2_SLICED_WSS_625, a +driver for the cx25840 video decoder sets lines 7-22 of both +fieldsAccording to ETS 300 706 lines 6-22 of the +first field and lines 5-22 of the second field may carry Teletext +data. to V4L2_SLICED_TELETEXT_B +and line 23 of the first field to +V4L2_SLICED_WSS_625. If +service_set is set to zero, then the values +of service_lines will be used instead. +On return the driver sets this field to the union of all +elements of the returned service_lines +array. It may contain less services than requested, perhaps just one, +if the hardware cannot handle more services simultaneously. It may be +empty (zero) if none of the requested services are supported by the +hardware. + + + __u16 + service_lines[2][24] + Applications initialize this +array with sets of data services the driver shall look for or insert +on the respective scan line. Subject to hardware capabilities drivers +return the requested set, a subset, which may be just a single +service, or an empty set. When the hardware cannot handle multiple +services on the same line the driver shall choose one. No assumptions +can be made on which service the driver chooses.Data +services are defined in . Array indices +map to ITU-R line numbers (see also and ) as follows: + + + + + Element + 525 line systems + 625 line systems + + + + + service_lines[0][1] + 1 + 1 + + + + + service_lines[0][23] + 23 + 23 + + + + + service_lines[1][1] + 264 + 314 + + + + + service_lines[1][23] + 286 + 336 + + + + + + Drivers must set +service_lines[0][0] and +service_lines[1][0] to zero. + + + __u32 + io_size + Maximum number of bytes passed by +one &func-read; or &func-write; call, and the buffer size in bytes for +the &VIDIOC-QBUF; and &VIDIOC-DQBUF; ioctl. Drivers set this field to +the size of &v4l2-sliced-vbi-data; times the number of non-zero +elements in the returned service_lines +array (that is the number of lines potentially carrying data). + + + __u32 + reserved[2] + This array is reserved for future +extensions. Applications and drivers must set it to zero. + + + +
+ + + + Sliced VBI services + + + + + + + + + + Symbol + Value + Reference + Lines, usually + Payload + + + + + V4L2_SLICED_TELETEXT_B +(Teletext System B) + 0x0001 + , + PAL/SECAM line 7-22, 320-335 (second field 7-22) + Last 42 of the 45 byte Teletext packet, that is +without clock run-in and framing code, lsb first transmitted. + + + V4L2_SLICED_VPS + 0x0400 + + PAL line 16 + Byte number 3 to 15 according to Figure 9 of +ETS 300 231, lsb first transmitted. + + + V4L2_SLICED_CAPTION_525 + 0x1000 + + NTSC line 21, 284 (second field 21) + Two bytes in transmission order, including parity +bit, lsb first transmitted. + + + V4L2_SLICED_WSS_625 + 0x4000 + , + PAL/SECAM line 23 + +Byte 0 1 + msb lsb msb lsb + Bit 7 6 5 4 3 2 1 0 x x 13 12 11 10 9 + + + + V4L2_SLICED_VBI_525 + 0x1000 + Set of services applicable to 525 +line systems. + + + V4L2_SLICED_VBI_625 + 0x4401 + Set of services applicable to 625 +line systems. + + + +
+ + Drivers may return an &EINVAL; when applications attempt to +read or write data without prior format negotiation, after switching +the video standard (which may invalidate the negotiated VBI +parameters) and after switching the video input (which may change the +video standard as a side effect). The &VIDIOC-S-FMT; ioctl may return +an &EBUSY; when applications attempt to change the format while i/o is +in progress (between a &VIDIOC-STREAMON; and &VIDIOC-STREAMOFF; call, +and after the first &func-read; or &func-write; call). +
+ +
+ Reading and writing sliced VBI data + + A single &func-read; or &func-write; call must pass all data +belonging to one video frame. That is an array of +v4l2_sliced_vbi_data structures with one or +more elements and a total size not exceeding +io_size bytes. Likewise in streaming I/O +mode one buffer of io_size bytes must +contain data of one video frame. The id of +unused v4l2_sliced_vbi_data elements must be +zero. + + + struct +<structname>v4l2_sliced_vbi_data</structname> + + &cs-def; + + + __u32 + id + A flag from +identifying the type of data in this packet. Only a single bit must be +set. When the id of a captured packet is +zero, the packet is empty and the contents of other fields are +undefined. Applications shall ignore empty packets. When the +id of a packet for output is zero the +contents of the data field are undefined +and the driver must no longer insert data on the requested +field and +line. + + + __u32 + field + The video field number this data has been captured +from, or shall be inserted at. 0 for the first +field, 1 for the second field. + + + __u32 + line + The field (as opposed to frame) line number this +data has been captured from, or shall be inserted at. See and for valid +values. Sliced VBI capture devices can set the line number of all +packets to 0 if the hardware cannot reliably +identify scan lines. The field number must always be valid. + + + __u32 + reserved + This field is reserved for future extensions. +Applications and drivers must set it to zero. + + + __u8 + data[48] + The packet payload. See for the contents and number of +bytes passed for each data type. The contents of padding bytes at the +end of this array are undefined, drivers and applications shall ignore +them. + + + +
+ + Packets are always passed in ascending line number order, +without duplicate line numbers. The &func-write; function and the +&VIDIOC-QBUF; ioctl must return an &EINVAL; when applications violate +this rule. They must also return an &EINVAL; when applications pass an +incorrect field or line number, or a combination of +field, line and +id which has not been negotiated with the +&VIDIOC-G-FMT; or &VIDIOC-S-FMT; ioctl. When the line numbers are +unknown the driver must pass the packets in transmitted order. The +driver can insert empty packets with id set +to zero anywhere in the packet array. + + To assure synchronization and to distinguish from frame +dropping, when a captured frame does not carry any of the requested +data services drivers must pass one or more empty packets. When an +application fails to pass VBI data in time for output, the driver +must output the last VPS and WSS packet again, and disable the output +of Closed Caption and Teletext data, or output data which is ignored +by Closed Caption and Teletext decoders. + + A sliced VBI device may support read/write and/or streaming (memory mapping and/or user +pointer) I/O. The latter bears the possibility of synchronizing +video and VBI data by using buffer timestamps. + +
+ +
+ Sliced VBI Data in MPEG Streams + + If a device can produce an MPEG output stream, it may be +capable of providing negotiated sliced VBI +services as data embedded in the MPEG stream. Users or +applications control this sliced VBI data insertion with the V4L2_CID_MPEG_STREAM_VBI_FMT +control. + + If the driver does not provide the V4L2_CID_MPEG_STREAM_VBI_FMT +control, or only allows that control to be set to +V4L2_MPEG_STREAM_VBI_FMT_NONE, then the device +cannot embed sliced VBI data in the MPEG stream. + + The +V4L2_CID_MPEG_STREAM_VBI_FMT control does not implicitly set +the device driver to capture nor cease capturing sliced VBI data. The +control only indicates to embed sliced VBI data in the MPEG stream, if +an application has negotiated sliced VBI service be captured. + + It may also be the case that a device can embed sliced VBI +data in only certain types of MPEG streams: for example in an MPEG-2 +PS but not an MPEG-2 TS. In this situation, if sliced VBI data +insertion is requested, the sliced VBI data will be embedded in MPEG +stream types when supported, and silently omitted from MPEG stream +types where sliced VBI data insertion is not supported by the device. + + + The following subsections specify the format of the +embedded sliced VBI data. + +
+ MPEG Stream Embedded, Sliced VBI Data Format: NONE + The +V4L2_MPEG_STREAM_VBI_FMT_NONE embedded sliced VBI +format shall be interpreted by drivers as a control to cease +embedding sliced VBI data in MPEG streams. Neither the device nor +driver shall insert "empty" embedded sliced VBI data packets in the +MPEG stream when this format is set. No MPEG stream data structures +are specified for this format. +
+ +
+ MPEG Stream Embedded, Sliced VBI Data Format: IVTV + The +V4L2_MPEG_STREAM_VBI_FMT_IVTV embedded sliced VBI +format, when supported, indicates to the driver to embed up to 36 +lines of sliced VBI data per frame in an MPEG-2 Private +Stream 1 PES packet encapsulated in an MPEG-2 +Program Pack in the MPEG stream. + + Historical context: This format +specification originates from a custom, embedded, sliced VBI data +format used by the ivtv driver. This format +has already been informally specified in the kernel sources in the +file Documentation/video4linux/cx2341x/README.vbi +. The maximum size of the payload and other aspects of this format +are driven by the CX23415 MPEG decoder's capabilities and limitations +with respect to extracting, decoding, and displaying sliced VBI data +embedded within an MPEG stream. + + This format's use is not exclusive to +the ivtv driver nor +exclusive to CX2341x devices, as the sliced VBI data packet insertion +into the MPEG stream is implemented in driver software. At least the +cx18 driver provides sliced VBI data insertion +into an MPEG-2 PS in this format as well. + + The following definitions specify the payload of the +MPEG-2 Private Stream 1 PES packets that contain +sliced VBI data when +V4L2_MPEG_STREAM_VBI_FMT_IVTV is set. +(The MPEG-2 Private Stream 1 PES packet header +and encapsulating MPEG-2 Program Pack header are +not detailed here. Please refer to the MPEG-2 specifications for +details on those packet headers.) + + The payload of the MPEG-2 Private Stream 1 PES + packets that contain sliced VBI data is specified by +&v4l2-mpeg-vbi-fmt-ivtv;. The payload is variable +length, depending on the actual number of lines of sliced VBI data +present in a video frame. The payload may be padded at the end with +unspecified fill bytes to align the end of the payload to a 4-byte +boundary. The payload shall never exceed 1552 bytes (2 fields with +18 lines/field with 43 bytes of data/line and a 4 byte magic number). + + + + struct <structname>v4l2_mpeg_vbi_fmt_ivtv</structname> + + + &cs-ustr; + + + __u8 + magic[4] + + A "magic" constant from that indicates +this is a valid sliced VBI data payload and also indicates which +member of the anonymous union, itv0 or +ITV0, to use for the payload data. + + + union + (anonymous) + + + + struct + v4l2_mpeg_vbi_itv0 + + itv0 + The primary form of the sliced VBI data payload +that contains anywhere from 1 to 35 lines of sliced VBI data. +Line masks are provided in this form of the payload indicating +which VBI lines are provided. + + + + struct + v4l2_mpeg_vbi_ITV0 + + ITV0 + An alternate form of the sliced VBI data payload +used when 36 lines of sliced VBI data are present. No line masks are +provided in this form of the payload; all valid line mask bits are +implcitly set. + + + +
+ + + Magic Constants for &v4l2-mpeg-vbi-fmt-ivtv; + <structfield>magic</structfield> field + + &cs-def; + + + Defined Symbol + Value + Description + + + + + V4L2_MPEG_VBI_IVTV_MAGIC0 + + "itv0" + Indicates the itv0 +member of the union in &v4l2-mpeg-vbi-fmt-ivtv; is valid. + + + V4L2_MPEG_VBI_IVTV_MAGIC1 + + "ITV0" + Indicates the ITV0 +member of the union in &v4l2-mpeg-vbi-fmt-ivtv; is valid and +that 36 lines of sliced VBI data are present. + + + +
+ + + struct <structname>v4l2_mpeg_vbi_itv0</structname> + + + &cs-str; + + + __le32 + linemask[2] + Bitmasks indicating the VBI service lines +present. These linemask values are stored +in little endian byte order in the MPEG stream. Some reference +linemask bit positions with their +corresponding VBI line number and video field are given below. +b0 indicates the least significant bit of a +linemask value: +linemask[0] b0: line 6 first field +linemask[0] b17: line 23 first field +linemask[0] b18: line 6 second field +linemask[0] b31: line 19 second field +linemask[1] b0: line 20 second field +linemask[1] b3: line 23 second field +linemask[1] b4-b31: unused and set to 0 + + + struct + v4l2_mpeg_vbi_itv0_line + + line[35] + This is a variable length array that holds from 1 +to 35 lines of sliced VBI data. The sliced VBI data lines present +correspond to the bits set in the linemask +array, starting from b0 of +linemask[0] up through b31 of +linemask[0], and from b0 + of linemask[1] up through b +3 of linemask[1]. +line[0] corresponds to the first bit +found set in the linemask array, +line[1] corresponds to the second bit +found set in the linemask array, etc. +If no linemask array bits are set, then +line[0] may contain one line of +unspecified data that should be ignored by applications. + + + +
+ + + struct <structname>v4l2_mpeg_vbi_ITV0</structname> + + + &cs-str; + + + struct + v4l2_mpeg_vbi_itv0_line + + line[36] + A fixed length array of 36 lines of sliced VBI +data. line[0] through line +[17] correspond to lines 6 through 23 of the +first field. line[18] through +line[35] corresponds to lines 6 +through 23 of the second field. + + + +
+ + + struct <structname>v4l2_mpeg_vbi_itv0_line</structname> + + + &cs-str; + + + __u8 + id + A line identifier value from + that indicates +the type of sliced VBI data stored on this line. + + + __u8 + data[42] + The sliced VBI data for the line. + + + +
+ + + Line Identifiers for struct <link + linkend="v4l2-mpeg-vbi-itv0-line"><structname> +v4l2_mpeg_vbi_itv0_line</structname></link> <structfield>id +</structfield> field + + &cs-def; + + + Defined Symbol + Value + Description + + + + + V4L2_MPEG_VBI_IVTV_TELETEXT_B + + 1 + Refer to +Sliced VBI services for a description of the line payload. + + + V4L2_MPEG_VBI_IVTV_CAPTION_525 + + 4 + Refer to +Sliced VBI services for a description of the line payload. + + + V4L2_MPEG_VBI_IVTV_WSS_625 + + 5 + Refer to +Sliced VBI services for a description of the line payload. + + + V4L2_MPEG_VBI_IVTV_VPS + + 7 + Refer to +Sliced VBI services for a description of the line payload. + + + +
+ +
+
+ + + diff --git a/Documentation/DocBook/v4l/dev-teletext.xml b/Documentation/DocBook/v4l/dev-teletext.xml new file mode 100644 index 00000000000..59f9993e148 --- /dev/null +++ b/Documentation/DocBook/v4l/dev-teletext.xml @@ -0,0 +1,40 @@ + Teletext Interface + + This interface aims at devices receiving and demodulating +Teletext data [, ], evaluating the +Teletext packages and storing formatted pages in cache memory. Such +devices are usually implemented as microcontrollers with serial +interface (I2C) and can be found on older +TV cards, dedicated Teletext decoding cards and home-brew devices +connected to the PC parallel port. + + The Teletext API was designed by Martin Buck. It is defined in +the kernel header file linux/videotext.h, the +specification is available from +http://home.pages.de/~videotext/. (Videotext is the name of +the German public television Teletext service.) Conventional character +device file names are /dev/vtx and +/dev/vttuner, with device number 83, 0 and 83, 16 +respectively. A similar interface exists for the Philips SAA5249 +Teletext decoder [specification?] with character device file names +/dev/tlkN, device number 102, N. + + Eventually the Teletext API was integrated into the V4L API +with character device file names /dev/vtx0 to +/dev/vtx31, device major number 81, minor numbers +192 to 223. For reference the V4L Teletext API specification is +reproduced here in full: "Teletext interfaces talk the existing VTX +API." Teletext devices with major number 83 and 102 will be removed in +Linux 2.6. + + There are no plans to replace the Teletext API or to integrate +it into V4L2. Please write to the linux-media mailing list: &v4l-ml; +when the need arises. + + diff --git a/Documentation/DocBook/v4l/driver.xml b/Documentation/DocBook/v4l/driver.xml new file mode 100644 index 00000000000..1f7eea5c4ec --- /dev/null +++ b/Documentation/DocBook/v4l/driver.xml @@ -0,0 +1,208 @@ + V4L2 Driver Programming + + + + to do + + + diff --git a/Documentation/DocBook/v4l/fdl-appendix.xml b/Documentation/DocBook/v4l/fdl-appendix.xml new file mode 100644 index 00000000000..b6ce50dbe49 --- /dev/null +++ b/Documentation/DocBook/v4l/fdl-appendix.xml @@ -0,0 +1,671 @@ + + + + + + Version 1.1, March 2000 + + + 2000Free Software Foundation, Inc. + + + +
Free Software Foundation, Inc. 59 Temple Place, + Suite 330, Boston, MA + 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies of this + license document, but changing it is not allowed. + + + + GNU Free Documentation License + + + 0. PREAMBLE + + The purpose of this License is to make a manual, textbook, or + other written document free in the sense of + freedom: to assure everyone the effective freedom to copy and + redistribute it, with or without modifying it, either + commercially or noncommercially. Secondarily, this License + preserves for the author and publisher a way to get credit for + their work, while not being considered responsible for + modifications made by others. + + + + This License is a kind of copyleft, which means + that derivative works of the document must themselves be free in + the same sense. It complements the GNU General Public License, + which is a copyleft license designed for free software. + + + + We have designed this License in order to use it for manuals for + free software, because free software needs free documentation: a + free program should come with manuals providing the same + freedoms that the software does. But this License is not limited + to software manuals; it can be used for any textual work, + regardless of subject matter or whether it is published as a + printed book. We recommend this License principally for works + whose purpose is instruction or reference. + + + + 1. APPLICABILITY AND DEFINITIONS + + This License applies to any manual or other work that contains a + notice placed by the copyright holder saying it can be + distributed under the terms of this License. The + Document, below, refers to any such manual or + work. Any member of the public is a licensee, and is addressed + as you. + + + + A Modified Version of the Document means any work + containing the Document or a portion of it, either copied + verbatim, or with modifications and/or translated into another + language. + + + + A Secondary Section is a named appendix or a + front-matter section of the Document that deals exclusively + with the relationship of the publishers or authors of the + Document to the Document's overall subject (or to related + matters) and contains nothing that could fall directly within + that overall subject. (For example, if the Document is in part a + textbook of mathematics, a Secondary Section may not explain any + mathematics.) The relationship could be a matter of historical + connection with the subject or with related matters, or of + legal, commercial, philosophical, ethical or political position + regarding them. + + + + The Invariant Sections are certain Secondary Sections whose titles + are designated, as being those of Invariant Sections, in the + notice that says that the Document is released under this + License. + + + + The Cover Texts are certain short passages of + text that are listed, as Front-Cover Texts or Back-Cover Texts, + in the notice that says that the Document is released under this + License. + + + + A Transparent copy of the Document means a machine-readable + copy, represented in a format whose specification is available + to the general public, whose contents can be viewed and edited + directly and straightforwardly with generic text editors or (for + images composed of pixels) generic paint programs or (for + drawings) some widely available drawing editor, and that is + suitable for input to text formatters or for automatic + translation to a variety of formats suitable for input to text + formatters. A copy made in an otherwise Transparent file format + whose markup has been designed to thwart or discourage + subsequent modification by readers is not Transparent. A copy + that is not Transparent is called + Opaque. + + + + Examples of suitable formats for Transparent copies include + plain ASCII without markup, Texinfo input format, LaTeX input + format, SGML or XML using a publicly available DTD, and + standard-conforming simple HTML designed for human + modification. Opaque formats include PostScript, PDF, + proprietary formats that can be read and edited only by + proprietary word processors, SGML or XML for which the DTD + and/or processing tools are not generally available, and the + machine-generated HTML produced by some word processors for + output purposes only. + + + + The Title Page means, for a printed book, the + title page itself, plus such following pages as are needed to + hold, legibly, the material this License requires to appear in + the title page. For works in formats which do not have any title + page as such, Title Page means the text near the + most prominent appearance of the work's title, preceding the + beginning of the body of the text. + + + + + 2. VERBATIM COPYING + + You may copy and distribute the Document in any medium, either + commercially or noncommercially, provided that this License, the + copyright notices, and the license notice saying this License + applies to the Document are reproduced in all copies, and that + you add no other conditions whatsoever to those of this + License. You may not use technical measures to obstruct or + control the reading or further copying of the copies you make or + distribute. However, you may accept compensation in exchange for + copies. If you distribute a large enough number of copies you + must also follow the conditions in section 3. + + + + You may also lend copies, under the same conditions stated + above, and you may publicly display copies. + + + + + 3. COPYING IN QUANTITY + + If you publish printed copies of the Document numbering more than 100, + and the Document's license notice requires Cover Texts, you must enclose + the copies in covers that carry, clearly and legibly, all these + Cover Texts: Front-Cover Texts on the front cover, and + Back-Cover Texts on the back cover. Both covers must also + clearly and legibly identify you as the publisher of these + copies. The front cover must present the full title with all + words of the title equally prominent and visible. You may add + other material on the covers in addition. Copying with changes + limited to the covers, as long as they preserve the title of the + Document and satisfy these + conditions, can be treated as verbatim copying in other + respects. + + + + If the required texts for either cover are too voluminous to fit + legibly, you should put the first ones listed (as many as fit + reasonably) on the actual cover, and continue the rest onto + adjacent pages. + + + + If you publish or distribute Opaque copies of the Document numbering more than 100, + you must either include a machine-readable Transparent copy along with + each Opaque copy, or state in or with each Opaque copy a + publicly-accessible computer-network location containing a + complete Transparent copy of the Document, free of added + material, which the general network-using public has access to + download anonymously at no charge using public-standard network + protocols. If you use the latter option, you must take + reasonably prudent steps, when you begin distribution of Opaque + copies in quantity, to ensure that this Transparent copy will + remain thus accessible at the stated location until at least one + year after the last time you distribute an Opaque copy (directly + or through your agents or retailers) of that edition to the + public. + + + + It is requested, but not required, that you contact the authors + of the Document well before + redistributing any large number of copies, to give them a chance + to provide you with an updated version of the Document. + + + + + 4. MODIFICATIONS + + You may copy and distribute a Modified Version of the Document under the conditions of + sections 2 and 3 above, provided that you release + the Modified Version under precisely this License, with the + Modified Version filling the role of the Document, thus + licensing distribution and modification of the Modified Version + to whoever possesses a copy of it. In addition, you must do + these things in the Modified Version: + + + + + + A + + Use in the Title + Page (and on the covers, if any) a title distinct + from that of the Document, and from those of + previous versions (which should, if there were any, be + listed in the History section of the Document). You may + use the same title as a previous version if the original + publisher of that version gives permission. + + + + + + + B + + List on the Title + Page, as authors, one or more persons or entities + responsible for authorship of the modifications in the + Modified Version, + together with at least five of the principal authors of + the Document (all of + its principal authors, if it has less than five). + + + + + + + C + + State on the Title + Page the name of the publisher of the Modified Version, as the + publisher. + + + + + + + D + + Preserve all the copyright notices of the Document. + + + + + + + E + + Add an appropriate copyright notice for your modifications + adjacent to the other copyright notices. + + + + + + + F + + Include, immediately after the copyright notices, a + license notice giving the public permission to use the + Modified Version under + the terms of this License, in the form shown in the + Addendum below. + + + + + + + G + + Preserve in that license notice the full lists of Invariant Sections and + required Cover + Texts given in the Document's license notice. + + + + + + + H + + Include an unaltered copy of this License. + + + + + + + I + + Preserve the section entitled History, and + its title, and add to it an item stating at least the + title, year, new authors, and publisher of the Modified Version as given on + the Title Page. If + there is no section entitled History in the + Document, create one + stating the title, year, authors, and publisher of the + Document as given on its Title Page, then add an item + describing the Modified Version as stated in the previous + sentence. + + + + + + + J + + Preserve the network location, if any, given in the Document for public access + to a Transparent + copy of the Document, and likewise the network locations + given in the Document for previous versions it was based + on. These may be placed in the History + section. You may omit a network location for a work that + was published at least four years before the Document + itself, or if the original publisher of the version it + refers to gives permission. + + + + + + + K + + In any section entitled Acknowledgements or + Dedications, preserve the section's title, + and preserve in the section all the substance and tone of + each of the contributor acknowledgements and/or + dedications given therein. + + + + + + + L + + Preserve all the Invariant + Sections of the Document, unaltered in their + text and in their titles. Section numbers or the + equivalent are not considered part of the section titles. + + + + + + + M + + Delete any section entitled + Endorsements. Such a section may not be + included in the Modified + Version. + + + + + + + N + + Do not retitle any existing section as + Endorsements or to conflict in title with + any Invariant + Section. + + + + + + + If the Modified Version + includes new front-matter sections or appendices that qualify as + Secondary Sections and + contain no material copied from the Document, you may at your + option designate some or all of these sections as invariant. To + do this, add their titles to the list of Invariant Sections in the + Modified Version's license notice. These titles must be + distinct from any other section titles. + + + + You may add a section entitled Endorsements, + provided it contains nothing but endorsements of your Modified Version by various + parties--for example, statements of peer review or that the text + has been approved by an organization as the authoritative + definition of a standard. + + + + You may add a passage of up to five words as a Front-Cover Text, and a passage + of up to 25 words as a Back-Cover Text, to the end of + the list of Cover Texts + in the Modified Version. + Only one passage of Front-Cover Text and one of Back-Cover Text + may be added by (or through arrangements made by) any one + entity. If the Document + already includes a cover text for the same cover, previously + added by you or by arrangement made by the same entity you are + acting on behalf of, you may not add another; but you may + replace the old one, on explicit permission from the previous + publisher that added the old one. + + + + The author(s) and publisher(s) of the Document do not by this License + give permission to use their names for publicity for or to + assert or imply endorsement of any Modified Version . + + + + + 5. COMBINING DOCUMENTS + + You may combine the Document + with other documents released under this License, under the + terms defined in section 4 + above for modified versions, provided that you include in the + combination all of the Invariant + Sections of all of the original documents, unmodified, + and list them all as Invariant Sections of your combined work in + its license notice. + + + + The combined work need only contain one copy of this License, + and multiple identical Invariant + Sections may be replaced with a single copy. If there are + multiple Invariant Sections with the same name but different + contents, make the title of each such section unique by adding + at the end of it, in parentheses, the name of the original + author or publisher of that section if known, or else a unique + number. Make the same adjustment to the section titles in the + list of Invariant Sections in the license notice of the combined + work. + + + + In the combination, you must combine any sections entitled + History in the various original documents, + forming one section entitled History; likewise + combine any sections entitled Acknowledgements, + and any sections entitled Dedications. You must + delete all sections entitled Endorsements. + + + + + 6. COLLECTIONS OF DOCUMENTS + + You may make a collection consisting of the Document and other documents + released under this License, and replace the individual copies + of this License in the various documents with a single copy that + is included in the collection, provided that you follow the + rules of this License for verbatim copying of each of the + documents in all other respects. + + + + You may extract a single document from such a collection, and + dispbibute it individually under this License, provided you + insert a copy of this License into the extracted document, and + follow this License in all other respects regarding verbatim + copying of that document. + + + + + 7. AGGREGATION WITH INDEPENDENT WORKS + + A compilation of the Document or its derivatives with + other separate and independent documents or works, in or on a + volume of a storage or distribution medium, does not as a whole + count as a Modified Version + of the Document, provided no compilation copyright is claimed + for the compilation. Such a compilation is called an + aggregate, and this License does not apply to the + other self-contained works thus compiled with the Document , on + account of their being thus compiled, if they are not themselves + derivative works of the Document. If the Cover Text requirement of section 3 is applicable to these + copies of the Document, then if the Document is less than one + quarter of the entire aggregate, the Document's Cover Texts may + be placed on covers that surround only the Document within the + aggregate. Otherwise they must appear on covers around the whole + aggregate. + + + + + 8. TRANSLATION + + Translation is considered a kind of modification, so you may + distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with + translations requires special permission from their copyright + holders, but you may include translations of some or all + Invariant Sections in addition to the original versions of these + Invariant Sections. You may include a translation of this + License provided that you also include the original English + version of this License. In case of a disagreement between the + translation and the original English version of this License, + the original English version will prevail. + + + + + 9. TERMINATION + + You may not copy, modify, sublicense, or distribute the Document except as expressly + provided for under this License. Any other attempt to copy, + modify, sublicense or distribute the Document is void, and will + automatically terminate your rights under this License. However, + parties who have received copies, or rights, from you under this + License will not have their licenses terminated so long as such + parties remain in full compliance. + + + + + 10. FUTURE REVISIONS OF THIS LICENSE + + The Free Software + Foundation may publish new, revised versions of the GNU + Free Documentation License from time to time. Such new versions + will be similar in spirit to the present version, but may differ + in detail to address new problems or concerns. See http://www.gnu.org/copyleft/. + + + + Each version of the License is given a distinguishing version + number. If the Document + specifies that a particular numbered version of this License + or any later version applies to it, you have the + option of following the terms and conditions either of that + specified version or of any later version that has been + published (not as a draft) by the Free Software Foundation. If + the Document does not specify a version number of this License, + you may choose any version ever published (not as a draft) by + the Free Software Foundation. + + + + + Addendum + + To use this License in a document you have written, include a copy of + the License in the document and put the following copyright and + license notices just after the title page: + + +
+ + Copyright © YEAR YOUR NAME. + + + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation + License, Version 1.1 or any later version published by the + Free Software Foundation; with the Invariant Sections being LIST + THEIR TITLES, with the Front-Cover Texts being LIST, + and with the Back-Cover + Texts being LIST. A copy of the license is included in + the section entitled GNU Free Documentation + License. + +
+ + + If you have no Invariant + Sections, write with no Invariant Sections + instead of saying which ones are invariant. If you have no + Front-Cover Texts, write + no Front-Cover Texts instead of + Front-Cover Texts being LIST; likewise for Back-Cover Texts. + + + + If your document contains nontrivial examples of program code, + we recommend releasing these examples in parallel under your + choice of free software license, such as the GNU General Public + License, to permit their use in free software. + + + + + + + + + diff --git a/Documentation/DocBook/v4l/fieldseq_bt.gif b/Documentation/DocBook/v4l/fieldseq_bt.gif new file mode 100644 index 00000000000..60e8569a76c Binary files /dev/null and b/Documentation/DocBook/v4l/fieldseq_bt.gif differ diff --git a/Documentation/DocBook/v4l/fieldseq_bt.pdf b/Documentation/DocBook/v4l/fieldseq_bt.pdf new file mode 100644 index 00000000000..26598b23f80 Binary files /dev/null and b/Documentation/DocBook/v4l/fieldseq_bt.pdf differ diff --git a/Documentation/DocBook/v4l/fieldseq_tb.gif b/Documentation/DocBook/v4l/fieldseq_tb.gif new file mode 100644 index 00000000000..718492f1cfc Binary files /dev/null and b/Documentation/DocBook/v4l/fieldseq_tb.gif differ diff --git a/Documentation/DocBook/v4l/fieldseq_tb.pdf b/Documentation/DocBook/v4l/fieldseq_tb.pdf new file mode 100644 index 00000000000..4965b22ddb3 Binary files /dev/null and b/Documentation/DocBook/v4l/fieldseq_tb.pdf differ diff --git a/Documentation/DocBook/v4l/func-close.xml b/Documentation/DocBook/v4l/func-close.xml new file mode 100644 index 00000000000..dfb41cbbbec --- /dev/null +++ b/Documentation/DocBook/v4l/func-close.xml @@ -0,0 +1,70 @@ + + + V4L2 close() + &manvol; + + + + v4l2-close + Close a V4L2 device + + + + + #include <unistd.h> + + int close + int fd + + + + + + Arguments + + + + fd + + &fd; + + + + + + + Description + + Closes the device. Any I/O in progress is terminated and +resources associated with the file descriptor are freed. However data +format parameters, current input or output, control values or other +properties remain unchanged. + + + + Return Value + + The function returns 0 on +success, -1 on failure and the +errno is set appropriately. Possible error +codes: + + + + EBADF + + fd is not a valid open file +descriptor. + + + + + + + diff --git a/Documentation/DocBook/v4l/func-ioctl.xml b/Documentation/DocBook/v4l/func-ioctl.xml new file mode 100644 index 00000000000..00f9690e1c2 --- /dev/null +++ b/Documentation/DocBook/v4l/func-ioctl.xml @@ -0,0 +1,146 @@ + + + V4L2 ioctl() + &manvol; + + + + v4l2-ioctl + Program a V4L2 device + + + + + #include <sys/ioctl.h> + + int ioctl + int fd + int request + void *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + V4L2 ioctl request code as defined in the videodev.h header file, for example +VIDIOC_QUERYCAP. + + + + argp + + Pointer to a function parameter, usually a structure. + + + + + + + Description + + The ioctl() function is used to program +V4L2 devices. The argument fd must be an open +file descriptor. An ioctl request has encoded +in it whether the argument is an input, output or read/write +parameter, and the size of the argument argp in +bytes. Macros and defines specifying V4L2 ioctl requests are located +in the videodev.h header file. +Applications should use their own copy, not include the version in the +kernel sources on the system they compile on. All V4L2 ioctl requests, +their respective function and parameters are specified in . + + + + Return Value + + On success the ioctl() function returns +0 and does not reset the +errno variable. On failure +-1 is returned, when the ioctl takes an +output or read/write parameter it remains unmodified, and the +errno variable is set appropriately. See below for +possible error codes. Generic errors like EBADF +or EFAULT are not listed in the sections +discussing individual ioctl requests. + Note ioctls may return undefined error codes. Since errors +may have side effects such as a driver reset applications should +abort on unexpected errors. + + + + EBADF + + fd is not a valid open file +descriptor. + + + + EBUSY + + The property cannot be changed right now. Typically +this error code is returned when I/O is in progress or the driver +supports multiple opens and another process locked the property. + + + + EFAULT + + argp references an inaccessible +memory area. + + + + ENOTTY + + fd is not associated with a +character special device. + + + + EINVAL + + The request or the data pointed +to by argp is not valid. This is a very common +error code, see the individual ioctl requests listed in for actual causes. + + + + ENOMEM + + Not enough physical or virtual memory was available to +complete the request. + + + + ERANGE + + The application attempted to set a control with the +&VIDIOC-S-CTRL; ioctl to a value which is out of bounds. + + + + + + + diff --git a/Documentation/DocBook/v4l/func-mmap.xml b/Documentation/DocBook/v4l/func-mmap.xml new file mode 100644 index 00000000000..2e2fc3933ae --- /dev/null +++ b/Documentation/DocBook/v4l/func-mmap.xml @@ -0,0 +1,185 @@ + + + V4L2 mmap() + &manvol; + + + + v4l2-mmap + Map device memory into application address space + + + + + +#include <unistd.h> +#include <sys/mman.h> + + void *mmap + void *start + size_t length + int prot + int flags + int fd + off_t offset + + + + + + Arguments + + + start + + Map the buffer to this address in the +application's address space. When the MAP_FIXED +flag is specified, start must be a multiple of the +pagesize and mmap will fail when the specified address +cannot be used. Use of this option is discouraged; applications should +just specify a NULL pointer here. + + + + length + + Length of the memory area to map. This must be the +same value as returned by the driver in the &v4l2-buffer; +length field. + + + + prot + + The prot argument describes the +desired memory protection. Regardless of the device type and the +direction of data exchange it should be set to +PROT_READ | PROT_WRITE, +permitting read and write access to image buffers. Drivers should +support at least this combination of flags. Note the Linux +video-buf kernel module, which is used by the +bttv, saa7134, saa7146, cx88 and vivi driver supports only +PROT_READ | PROT_WRITE. When +the driver does not support the desired protection the +mmap() function fails. + Note device memory accesses (⪚ the memory on a +graphics card with video capturing hardware) may incur a performance +penalty compared to main memory accesses, or reads may be +significantly slower than writes or vice versa. Other I/O methods may +be more efficient in this case. + + + + flags + + The flags parameter +specifies the type of the mapped object, mapping options and whether +modifications made to the mapped copy of the page are private to the +process or are to be shared with other references. + MAP_FIXED requests that the +driver selects no other address than the one specified. If the +specified address cannot be used, mmap() will fail. If +MAP_FIXED is specified, +start must be a multiple of the pagesize. Use +of this option is discouraged. + One of the MAP_SHARED or +MAP_PRIVATE flags must be set. +MAP_SHARED allows applications to share the +mapped memory with other (⪚ child-) processes. Note the Linux +video-buf module which is used by the bttv, +saa7134, saa7146, cx88 and vivi driver supports only +MAP_SHARED. MAP_PRIVATE +requests copy-on-write semantics. V4L2 applications should not set the +MAP_PRIVATE, MAP_DENYWRITE, +MAP_EXECUTABLE or MAP_ANON +flag. + + + + fd + + &fd; + + + + offset + + Offset of the buffer in device memory. This must be the +same value as returned by the driver in the &v4l2-buffer; +m union offset field. + + + + + + + Description + + The mmap() function asks to map +length bytes starting at +offset in the memory of the device specified by +fd into the application address space, +preferably at address start. This latter +address is a hint only, and is usually specified as 0. + + Suitable length and offset parameters are queried with the +&VIDIOC-QUERYBUF; ioctl. Buffers must be allocated with the +&VIDIOC-REQBUFS; ioctl before they can be queried. + + To unmap buffers the &func-munmap; function is used. + + + + Return Value + + On success mmap() returns a pointer to +the mapped buffer. On error MAP_FAILED (-1) is +returned, and the errno variable is set +appropriately. Possible error codes are: + + + + EBADF + + fd is not a valid file +descriptor. + + + + EACCES + + fd is +not open for reading and writing. + + + + EINVAL + + The start or +length or offset are not +suitable. (E. g. they are too large, or not aligned on a +PAGESIZE boundary.) + The flags or +prot value is not supported. + No buffers have been allocated with the +&VIDIOC-REQBUFS; ioctl. + + + + ENOMEM + + Not enough physical or virtual memory was available to +complete the request. + + + + + + + diff --git a/Documentation/DocBook/v4l/func-munmap.xml b/Documentation/DocBook/v4l/func-munmap.xml new file mode 100644 index 00000000000..502ed49323b --- /dev/null +++ b/Documentation/DocBook/v4l/func-munmap.xml @@ -0,0 +1,83 @@ + + + V4L2 munmap() + &manvol; + + + + v4l2-munmap + Unmap device memory + + + + + +#include <unistd.h> +#include <sys/mman.h> + + int munmap + void *start + size_t length + + + + + Arguments + + + start + + Address of the mapped buffer as returned by the +&func-mmap; function. + + + + length + + Length of the mapped buffer. This must be the same +value as given to mmap() and returned by the +driver in the &v4l2-buffer; length +field. + + + + + + + Description + + Unmaps a previously with the &func-mmap; function mapped +buffer and frees it, if possible. + + + + Return Value + + On success munmap() returns 0, on +failure -1 and the errno variable is set +appropriately: + + + + EINVAL + + The start or +length is incorrect, or no buffers have been +mapped yet. + + + + + + + diff --git a/Documentation/DocBook/v4l/func-open.xml b/Documentation/DocBook/v4l/func-open.xml new file mode 100644 index 00000000000..7595d07a8c7 --- /dev/null +++ b/Documentation/DocBook/v4l/func-open.xml @@ -0,0 +1,121 @@ + + + V4L2 open() + &manvol; + + + + v4l2-open + Open a V4L2 device + + + + + #include <fcntl.h> + + int open + const char *device_name + int flags + + + + + + Arguments + + + + device_name + + Device to be opened. + + + + flags + + Open flags. Access mode must be +O_RDWR. This is just a technicality, input devices +still support only reading and output devices only writing. + When the O_NONBLOCK flag is +given, the read() function and the &VIDIOC-DQBUF; ioctl will return +the &EAGAIN; when no data is available or no buffer is in the driver +outgoing queue, otherwise these functions block until data becomes +available. All V4L2 drivers exchanging data with applications must +support the O_NONBLOCK flag. + Other flags have no effect. + + + + + + Description + + To open a V4L2 device applications call +open() with the desired device name. This +function has no side effects; all data format parameters, current +input or output, control values or other properties remain unchanged. +At the first open() call after loading the driver +they will be reset to default values, drivers are never in an +undefined state. + + + Return Value + + On success open returns the new file +descriptor. On error -1 is returned, and the errno +variable is set appropriately. Possible error codes are: + + + + EACCES + + The caller has no permission to access the +device. + + + + EBUSY + + The driver does not support multiple opens and the +device is already in use. + + + + ENXIO + + No device corresponding to this device special file +exists. + + + + ENOMEM + + Not enough kernel memory was available to complete the +request. + + + + EMFILE + + The process already has the maximum number of +files open. + + + + ENFILE + + The limit on the total number of files open on the +system has been reached. + + + + + + + diff --git a/Documentation/DocBook/v4l/func-poll.xml b/Documentation/DocBook/v4l/func-poll.xml new file mode 100644 index 00000000000..ec3c718f596 --- /dev/null +++ b/Documentation/DocBook/v4l/func-poll.xml @@ -0,0 +1,127 @@ + + + V4L2 poll() + &manvol; + + + + v4l2-poll + Wait for some event on a file descriptor + + + + + #include <sys/poll.h> + + int poll + struct pollfd *ufds + unsigned int nfds + int timeout + + + + + + Description + + With the poll() function applications +can suspend execution until the driver has captured data or is ready +to accept data for output. + + When streaming I/O has been negotiated this function waits +until a buffer has been filled or displayed and can be dequeued with +the &VIDIOC-DQBUF; ioctl. When buffers are already in the outgoing +queue of the driver the function returns immediately. + + On success poll() returns the number of +file descriptors that have been selected (that is, file descriptors +for which the revents field of the +respective pollfd structure is non-zero). +Capture devices set the POLLIN and +POLLRDNORM flags in the +revents field, output devices the +POLLOUT and POLLWRNORM +flags. When the function timed out it returns a value of zero, on +failure it returns -1 and the +errno variable is set appropriately. When the +application did not call &VIDIOC-QBUF; or &VIDIOC-STREAMON; yet the +poll() function succeeds, but sets the +POLLERR flag in the +revents field. + + When use of the read() function has +been negotiated and the driver does not capture yet, the +poll function starts capturing. When that fails +it returns a POLLERR as above. Otherwise it waits +until data has been captured and can be read. When the driver captures +continuously (as opposed to, for example, still images) the function +may return immediately. + + When use of the write() function has +been negotiated the poll function just waits +until the driver is ready for a non-blocking +write() call. + + All drivers implementing the read() or +write() function or streaming I/O must also +support the poll() function. + + For more details see the +poll() manual page. + + + + Return Value + + On success, poll() returns the number +structures which have non-zero revents +fields, or zero if the call timed out. On error +-1 is returned, and the +errno variable is set appropriately: + + + + EBADF + + One or more of the ufds members +specify an invalid file descriptor. + + + + EBUSY + + The driver does not support multiple read or write +streams and the device is already in use. + + + + EFAULT + + ufds references an inaccessible +memory area. + + + + EINTR + + The call was interrupted by a signal. + + + + EINVAL + + The nfds argument is greater +than OPEN_MAX. + + + + + + + diff --git a/Documentation/DocBook/v4l/func-read.xml b/Documentation/DocBook/v4l/func-read.xml new file mode 100644 index 00000000000..a5089bf8873 --- /dev/null +++ b/Documentation/DocBook/v4l/func-read.xml @@ -0,0 +1,189 @@ + + + V4L2 read() + &manvol; + + + + v4l2-read + Read from a V4L2 device + + + + + #include <unistd.h> + + ssize_t read + int fd + void *buf + size_t count + + + + + + Arguments + + + + fd + + &fd; + + + + buf + + + + + + count + + + + + + + + + Description + + read() attempts to read up to +count bytes from file descriptor +fd into the buffer starting at +buf. The layout of the data in the buffer is +discussed in the respective device interface section, see ##. If count is zero, +read() returns zero and has no other results. If +count is greater than +SSIZE_MAX, the result is unspecified. Regardless +of the count value each +read() call will provide at most one frame (two +fields) worth of data. + + By default read() blocks until data +becomes available. When the O_NONBLOCK flag was +given to the &func-open; function it +returns immediately with an &EAGAIN; when no data is available. The +&func-select; or &func-poll; functions +can always be used to suspend execution until data becomes available. All +drivers supporting the read() function must also +support select() and +poll(). + + Drivers can implement read functionality in different +ways, using a single or multiple buffers and discarding the oldest or +newest frames once the internal buffers are filled. + + read() never returns a "snapshot" of a +buffer being filled. Using a single buffer the driver will stop +capturing when the application starts reading the buffer until the +read is finished. Thus only the period of the vertical blanking +interval is available for reading, or the capture rate must fall below +the nominal frame rate of the video standard. + +The behavior of +read() when called during the active picture +period or the vertical blanking separating the top and bottom field +depends on the discarding policy. A driver discarding the oldest +frames keeps capturing into an internal buffer, continuously +overwriting the previously, not read frame, and returns the frame +being received at the time of the read() call as +soon as it is complete. + + A driver discarding the newest frames stops capturing until +the next read() call. The frame being received at +read() time is discarded, returning the following +frame instead. Again this implies a reduction of the capture rate to +one half or less of the nominal frame rate. An example of this model +is the video read mode of the bttv driver, initiating a DMA to user +memory when read() is called and returning when +the DMA finished. + + In the multiple buffer model drivers maintain a ring of +internal buffers, automatically advancing to the next free buffer. +This allows continuous capturing when the application can empty the +buffers fast enough. Again, the behavior when the driver runs out of +free buffers depends on the discarding policy. + + Applications can get and set the number of buffers used +internally by the driver with the &VIDIOC-G-PARM; and &VIDIOC-S-PARM; +ioctls. They are optional, however. The discarding policy is not +reported and cannot be changed. For minimum requirements see . + + + + Return Value + + On success, the number of bytes read is returned. It is not +an error if this number is smaller than the number of bytes requested, +or the amount of data required for one frame. This may happen for +example because read() was interrupted by a +signal. On error, -1 is returned, and the errno +variable is set appropriately. In this case the next read will start +at the beginning of a new frame. Possible error codes are: + + + + EAGAIN + + Non-blocking I/O has been selected using +O_NONBLOCK and no data was immediately available for reading. + + + + EBADF + + fd is not a valid file +descriptor or is not open for reading, or the process already has the +maximum number of files open. + + + + EBUSY + + The driver does not support multiple read streams and the +device is already in use. + + + + EFAULT + + buf references an inaccessible +memory area. + + + + EINTR + + The call was interrupted by a signal before any +data was read. + + + + EIO + + I/O error. This indicates some hardware problem or a +failure to communicate with a remote device (USB camera etc.). + + + + EINVAL + + The read() function is not +supported by this driver, not on this device, or generally not on this +type of device. + + + + + + + diff --git a/Documentation/DocBook/v4l/func-select.xml b/Documentation/DocBook/v4l/func-select.xml new file mode 100644 index 00000000000..b6713623181 --- /dev/null +++ b/Documentation/DocBook/v4l/func-select.xml @@ -0,0 +1,138 @@ + + + V4L2 select() + &manvol; + + + + v4l2-select + Synchronous I/O multiplexing + + + + + +#include <sys/time.h> +#include <sys/types.h> +#include <unistd.h> + + int select + int nfds + fd_set *readfds + fd_set *writefds + fd_set *exceptfds + struct timeval *timeout + + + + + + Description + + With the select() function applications +can suspend execution until the driver has captured data or is ready +to accept data for output. + + When streaming I/O has been negotiated this function waits +until a buffer has been filled or displayed and can be dequeued with +the &VIDIOC-DQBUF; ioctl. When buffers are already in the outgoing +queue of the driver the function returns immediately. + + On success select() returns the total +number of bits set in the fd_sets. When the +function timed out it returns a value of zero. On failure it returns +-1 and the errno +variable is set appropriately. When the application did not call +&VIDIOC-QBUF; or &VIDIOC-STREAMON; yet the +select() function succeeds, setting the bit of +the file descriptor in readfds or +writefds, but subsequent &VIDIOC-DQBUF; calls +will fail.The Linux kernel implements +select() like the &func-poll; function, but +select() cannot return a +POLLERR. + + + When use of the read() function has +been negotiated and the driver does not capture yet, the +select() function starts capturing. When that +fails, select() returns successful and a +subsequent read() call, which also attempts to +start capturing, will return an appropriate error code. When the +driver captures continuously (as opposed to, for example, still +images) and data is already available the +select() function returns immediately. + + When use of the write() function has +been negotiated the select() function just waits +until the driver is ready for a non-blocking +write() call. + + All drivers implementing the read() or +write() function or streaming I/O must also +support the select() function. + + For more details see the select() +manual page. + + + + + Return Value + + On success, select() returns the number +of descriptors contained in the three returned descriptor sets, which +will be zero if the timeout expired. On error +-1 is returned, and the +errno variable is set appropriately; the sets and +timeout are undefined. Possible error codes +are: + + + + EBADF + + One or more of the file descriptor sets specified a +file descriptor that is not open. + + + + EBUSY + + The driver does not support multiple read or write +streams and the device is already in use. + + + + EFAULT + + The readfds, +writefds, exceptfds or +timeout pointer references an inaccessible memory +area. + + + + EINTR + + The call was interrupted by a signal. + + + + EINVAL + + The nfds argument is less than +zero or greater than FD_SETSIZE. + + + + + + + diff --git a/Documentation/DocBook/v4l/func-write.xml b/Documentation/DocBook/v4l/func-write.xml new file mode 100644 index 00000000000..2c09c09371c --- /dev/null +++ b/Documentation/DocBook/v4l/func-write.xml @@ -0,0 +1,136 @@ + + + V4L2 write() + &manvol; + + + + v4l2-write + Write to a V4L2 device + + + + + #include <unistd.h> + + ssize_t write + int fd + void *buf + size_t count + + + + + + Arguments + + + + fd + + &fd; + + + + buf + + + + + + count + + + + + + + + + Description + + write() writes up to +count bytes to the device referenced by the +file descriptor fd from the buffer starting at +buf. When the hardware outputs are not active +yet, this function enables them. When count is +zero, write() returns +0 without any other effect. + + When the application does not provide more data in time, the +previous video frame, raw VBI image, sliced VPS or WSS data is +displayed again. Sliced Teletext or Closed Caption data is not +repeated, the driver inserts a blank line instead. + + + + Return Value + + On success, the number of bytes written are returned. Zero +indicates nothing was written. On error, -1 +is returned, and the errno variable is set +appropriately. In this case the next write will start at the beginning +of a new frame. Possible error codes are: + + + + EAGAIN + + Non-blocking I/O has been selected using the O_NONBLOCK flag and no +buffer space was available to write the data immediately. + + + + EBADF + + fd is not a valid file +descriptor or is not open for writing. + + + + EBUSY + + The driver does not support multiple write streams and the +device is already in use. + + + + EFAULT + + buf references an inaccessible +memory area. + + + + EINTR + + The call was interrupted by a signal before any +data was written. + + + + EIO + + I/O error. This indicates some hardware problem. + + + + EINVAL + + The write() function is not +supported by this driver, not on this device, or generally not on this +type of device. + + + + + + + diff --git a/Documentation/DocBook/v4l/io.xml b/Documentation/DocBook/v4l/io.xml new file mode 100644 index 00000000000..f92f24323b2 --- /dev/null +++ b/Documentation/DocBook/v4l/io.xml @@ -0,0 +1,1073 @@ + Input/Output + + The V4L2 API defines several different methods to read from or +write to a device. All drivers exchanging data with applications must +support at least one of them. + + The classic I/O method using the read() +and write() function is automatically selected +after opening a V4L2 device. When the driver does not support this +method attempts to read or write will fail at any time. + + Other methods must be negotiated. To select the streaming I/O +method with memory mapped or user buffers applications call the +&VIDIOC-REQBUFS; ioctl. The asynchronous I/O method is not defined +yet. + + Video overlay can be considered another I/O method, although +the application does not directly receive the image data. It is +selected by initiating video overlay with the &VIDIOC-S-FMT; ioctl. +For more information see . + + Generally exactly one I/O method, including overlay, is +associated with each file descriptor. The only exceptions are +applications not exchanging data with a driver ("panel applications", +see ) and drivers permitting simultaneous video capturing +and overlay using the same file descriptor, for compatibility with V4L +and earlier versions of V4L2. + + VIDIOC_S_FMT and +VIDIOC_REQBUFS would permit this to some degree, +but for simplicity drivers need not support switching the I/O method +(after first switching away from read/write) other than by closing +and reopening the device. + + The following sections describe the various I/O methods in +more detail. + +
+ Read/Write + + Input and output devices support the +read() and write() function, +respectively, when the V4L2_CAP_READWRITE flag in +the capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl is set. + + Drivers may need the CPU to copy the data, but they may also +support DMA to or from user memory, so this I/O method is not +necessarily less efficient than other methods merely exchanging buffer +pointers. It is considered inferior though because no meta-information +like frame counters or timestamps are passed. This information is +necessary to recognize frame dropping and to synchronize with other +data streams. However this is also the simplest I/O method, requiring +little or no setup to exchange data. It permits command line stunts +like this (the vidctrl tool is +fictitious): + + + +> vidctrl /dev/video --input=0 --format=YUYV --size=352x288 +> dd if=/dev/video of=myimage.422 bs=202752 count=1 + + + + To read from the device applications use the +&func-read; function, to write the &func-write; function. +Drivers must implement one I/O method if they +exchange data with applications, but it need not be this. + It would be desirable if applications could depend on +drivers supporting all I/O interfaces, but as much as the complex +memory mapping I/O can be inadequate for some devices we have no +reason to require this interface, which is most useful for simple +applications capturing still images. + When reading or writing is supported, the driver +must also support the &func-select; and &func-poll; +function. + At the driver level select() and +poll() are the same, and +select() is too important to be optional. + +
+ +
+ Streaming I/O (Memory Mapping) + + Input and output devices support this I/O method when the +V4L2_CAP_STREAMING flag in the +capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl is set. There are two +streaming methods, to determine if the memory mapping flavor is +supported applications must call the &VIDIOC-REQBUFS; ioctl. + + Streaming is an I/O method where only pointers to buffers +are exchanged between application and driver, the data itself is not +copied. Memory mapping is primarily intended to map buffers in device +memory into the application's address space. Device memory can be for +example the video memory on a graphics card with a video capture +add-on. However, being the most efficient I/O method available for a +long time, many other drivers support streaming as well, allocating +buffers in DMA-able main memory. + + A driver can support many sets of buffers. Each set is +identified by a unique buffer type value. The sets are independent and +each set can hold a different type of data. To access different sets +at the same time different file descriptors must be used. + One could use one file descriptor and set the buffer +type field accordingly when calling &VIDIOC-QBUF; etc., but it makes +the select() function ambiguous. We also like the +clean approach of one file descriptor per logical stream. Video +overlay for example is also a logical stream, although the CPU is not +needed for continuous operation. + + + To allocate device buffers applications call the +&VIDIOC-REQBUFS; ioctl with the desired number of buffers and buffer +type, for example V4L2_BUF_TYPE_VIDEO_CAPTURE. +This ioctl can also be used to change the number of buffers or to free +the allocated memory, provided none of the buffers are still +mapped. + + Before applications can access the buffers they must map +them into their address space with the &func-mmap; function. The +location of the buffers in device memory can be determined with the +&VIDIOC-QUERYBUF; ioctl. The m.offset and +length returned in a &v4l2-buffer; are +passed as sixth and second parameter to the +mmap() function. The offset and length values +must not be modified. Remember the buffers are allocated in physical +memory, as opposed to virtual memory which can be swapped out to disk. +Applications should free the buffers as soon as possible with the +&func-munmap; function. + + + Mapping buffers + + +&v4l2-requestbuffers; reqbuf; +struct { + void *start; + size_t length; +} *buffers; +unsigned int i; + +memset (&reqbuf, 0, sizeof (reqbuf)); +reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; +reqbuf.memory = V4L2_MEMORY_MMAP; +reqbuf.count = 20; + +if (-1 == ioctl (fd, &VIDIOC-REQBUFS;, &reqbuf)) { + if (errno == EINVAL) + printf ("Video capturing or mmap-streaming is not supported\n"); + else + perror ("VIDIOC_REQBUFS"); + + exit (EXIT_FAILURE); +} + +/* We want at least five buffers. */ + +if (reqbuf.count < 5) { + /* You may need to free the buffers here. */ + printf ("Not enough buffer memory\n"); + exit (EXIT_FAILURE); +} + +buffers = calloc (reqbuf.count, sizeof (*buffers)); +assert (buffers != NULL); + +for (i = 0; i < reqbuf.count; i++) { + &v4l2-buffer; buffer; + + memset (&buffer, 0, sizeof (buffer)); + buffer.type = reqbuf.type; + buffer.memory = V4L2_MEMORY_MMAP; + buffer.index = i; + + if (-1 == ioctl (fd, &VIDIOC-QUERYBUF;, &buffer)) { + perror ("VIDIOC_QUERYBUF"); + exit (EXIT_FAILURE); + } + + buffers[i].length = buffer.length; /* remember for munmap() */ + + buffers[i].start = mmap (NULL, buffer.length, + PROT_READ | PROT_WRITE, /* recommended */ + MAP_SHARED, /* recommended */ + fd, buffer.m.offset); + + if (MAP_FAILED == buffers[i].start) { + /* If you do not exit here you should unmap() and free() + the buffers mapped so far. */ + perror ("mmap"); + exit (EXIT_FAILURE); + } +} + +/* Cleanup. */ + +for (i = 0; i < reqbuf.count; i++) + munmap (buffers[i].start, buffers[i].length); + + + + Conceptually streaming drivers maintain two buffer queues, an incoming +and an outgoing queue. They separate the synchronous capture or output +operation locked to a video clock from the application which is +subject to random disk or network delays and preemption by +other processes, thereby reducing the probability of data loss. +The queues are organized as FIFOs, buffers will be +output in the order enqueued in the incoming FIFO, and were +captured in the order dequeued from the outgoing FIFO. + + The driver may require a minimum number of buffers enqueued +at all times to function, apart of this no limit exists on the number +of buffers applications can enqueue in advance, or dequeue and +process. They can also enqueue in a different order than buffers have +been dequeued, and the driver can fill enqueued +empty buffers in any order. + Random enqueue order permits applications processing +images out of order (such as video codecs) to return buffers earlier, +reducing the probability of data loss. Random fill order allows +drivers to reuse buffers on a LIFO-basis, taking advantage of caches +holding scatter-gather lists and the like. + The index number of a buffer (&v4l2-buffer; +index) plays no role here, it only +identifies the buffer. + + Initially all mapped buffers are in dequeued state, +inaccessible by the driver. For capturing applications it is customary +to first enqueue all mapped buffers, then to start capturing and enter +the read loop. Here the application waits until a filled buffer can be +dequeued, and re-enqueues the buffer when the data is no longer +needed. Output applications fill and enqueue buffers, when enough +buffers are stacked up the output is started with +VIDIOC_STREAMON. In the write loop, when +the application runs out of free buffers, it must wait until an empty +buffer can be dequeued and reused. + + To enqueue and dequeue a buffer applications use the +&VIDIOC-QBUF; and &VIDIOC-DQBUF; ioctl. The status of a buffer being +mapped, enqueued, full or empty can be determined at any time using the +&VIDIOC-QUERYBUF; ioctl. Two methods exist to suspend execution of the +application until one or more buffers can be dequeued. By default +VIDIOC_DQBUF blocks when no buffer is in the +outgoing queue. When the O_NONBLOCK flag was +given to the &func-open; function, VIDIOC_DQBUF +returns immediately with an &EAGAIN; when no buffer is available. The +&func-select; or &func-poll; function are always available. + + To start and stop capturing or output applications call the +&VIDIOC-STREAMON; and &VIDIOC-STREAMOFF; ioctl. Note +VIDIOC_STREAMOFF removes all buffers from both +queues as a side effect. Since there is no notion of doing anything +"now" on a multitasking system, if an application needs to synchronize +with another event it should examine the &v4l2-buffer; +timestamp of captured buffers, or set the +field before enqueuing buffers for output. + + Drivers implementing memory mapping I/O must +support the VIDIOC_REQBUFS, +VIDIOC_QUERYBUF, +VIDIOC_QBUF, VIDIOC_DQBUF, +VIDIOC_STREAMON and +VIDIOC_STREAMOFF ioctl, the +mmap(), munmap(), +select() and poll() +function. + At the driver level select() and +poll() are the same, and +select() is too important to be optional. The +rest should be evident. + + + [capture example] + +
+ +
+ Streaming I/O (User Pointers) + + Input and output devices support this I/O method when the +V4L2_CAP_STREAMING flag in the +capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl is set. If the particular user +pointer method (not only memory mapping) is supported must be +determined by calling the &VIDIOC-REQBUFS; ioctl. + + This I/O method combines advantages of the read/write and +memory mapping methods. Buffers are allocated by the application +itself, and can reside for example in virtual or shared memory. Only +pointers to data are exchanged, these pointers and meta-information +are passed in &v4l2-buffer;. The driver must be switched +into user pointer I/O mode by calling the &VIDIOC-REQBUFS; with the +desired buffer type. No buffers are allocated beforehands, +consequently they are not indexed and cannot be queried like mapped +buffers with the VIDIOC_QUERYBUF ioctl. + + + Initiating streaming I/O with user pointers + + +&v4l2-requestbuffers; reqbuf; + +memset (&reqbuf, 0, sizeof (reqbuf)); +reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; +reqbuf.memory = V4L2_MEMORY_USERPTR; + +if (ioctl (fd, &VIDIOC-REQBUFS;, &reqbuf) == -1) { + if (errno == EINVAL) + printf ("Video capturing or user pointer streaming is not supported\n"); + else + perror ("VIDIOC_REQBUFS"); + + exit (EXIT_FAILURE); +} + + + + Buffer addresses and sizes are passed on the fly with the +&VIDIOC-QBUF; ioctl. Although buffers are commonly cycled, +applications can pass different addresses and sizes at each +VIDIOC_QBUF call. If required by the hardware the +driver swaps memory pages within physical memory to create a +continuous area of memory. This happens transparently to the +application in the virtual memory subsystem of the kernel. When buffer +pages have been swapped out to disk they are brought back and finally +locked in physical memory for DMA. + We expect that frequently used buffers are typically not +swapped out. Anyway, the process of swapping, locking or generating +scatter-gather lists may be time consuming. The delay can be masked by +the depth of the incoming buffer queue, and perhaps by maintaining +caches assuming a buffer will be soon enqueued again. On the other +hand, to optimize memory usage drivers can limit the number of buffers +locked in advance and recycle the most recently used buffers first. Of +course, the pages of empty buffers in the incoming queue need not be +saved to disk. Output buffers must be saved on the incoming and +outgoing queue because an application may share them with other +processes. + + + Filled or displayed buffers are dequeued with the +&VIDIOC-DQBUF; ioctl. The driver can unlock the memory pages at any +time between the completion of the DMA and this ioctl. The memory is +also unlocked when &VIDIOC-STREAMOFF; is called, &VIDIOC-REQBUFS;, or +when the device is closed. Applications must take care not to free +buffers without dequeuing. For once, the buffers remain locked until +further, wasting physical memory. Second the driver will not be +notified when the memory is returned to the application's free list +and subsequently reused for other purposes, possibly completing the +requested DMA and overwriting valuable data. + + For capturing applications it is customary to enqueue a +number of empty buffers, to start capturing and enter the read loop. +Here the application waits until a filled buffer can be dequeued, and +re-enqueues the buffer when the data is no longer needed. Output +applications fill and enqueue buffers, when enough buffers are stacked +up output is started. In the write loop, when the application +runs out of free buffers it must wait until an empty buffer can be +dequeued and reused. Two methods exist to suspend execution of the +application until one or more buffers can be dequeued. By default +VIDIOC_DQBUF blocks when no buffer is in the +outgoing queue. When the O_NONBLOCK flag was +given to the &func-open; function, VIDIOC_DQBUF +returns immediately with an &EAGAIN; when no buffer is available. The +&func-select; or &func-poll; function are always available. + + To start and stop capturing or output applications call the +&VIDIOC-STREAMON; and &VIDIOC-STREAMOFF; ioctl. Note +VIDIOC_STREAMOFF removes all buffers from both +queues and unlocks all buffers as a side effect. Since there is no +notion of doing anything "now" on a multitasking system, if an +application needs to synchronize with another event it should examine +the &v4l2-buffer; timestamp of captured +buffers, or set the field before enqueuing buffers for output. + + Drivers implementing user pointer I/O must +support the VIDIOC_REQBUFS, +VIDIOC_QBUF, VIDIOC_DQBUF, +VIDIOC_STREAMON and +VIDIOC_STREAMOFF ioctl, the +select() and poll() function. + At the driver level select() and +poll() are the same, and +select() is too important to be optional. The +rest should be evident. + +
+ +
+ Asynchronous I/O + + This method is not defined yet. +
+ +
+ Buffers + + A buffer contains data exchanged by application and +driver using one of the Streaming I/O methods. Only pointers to +buffers are exchanged, the data itself is not copied. These pointers, +together with meta-information like timestamps or field parity, are +stored in a struct v4l2_buffer, argument to +the &VIDIOC-QUERYBUF;, &VIDIOC-QBUF; and &VIDIOC-DQBUF; ioctl. + + Nominally timestamps refer to the first data byte transmitted. +In practice however the wide range of hardware covered by the V4L2 API +limits timestamp accuracy. Often an interrupt routine will +sample the system clock shortly after the field or frame was stored +completely in memory. So applications must expect a constant +difference up to one field or frame period plus a small (few scan +lines) random error. The delay and error can be much +larger due to compression or transmission over an external bus when +the frames are not properly stamped by the sender. This is frequently +the case with USB cameras. Here timestamps refer to the instant the +field or frame was received by the driver, not the capture time. These +devices identify by not enumerating any video standards, see . + + Similar limitations apply to output timestamps. Typically +the video hardware locks to a clock controlling the video timing, the +horizontal and vertical synchronization pulses. At some point in the +line sequence, possibly the vertical blanking, an interrupt routine +samples the system clock, compares against the timestamp and programs +the hardware to repeat the previous field or frame, or to display the +buffer contents. + + Apart of limitations of the video device and natural +inaccuracies of all clocks, it should be noted system time itself is +not perfectly stable. It can be affected by power saving cycles, +warped to insert leap seconds, or even turned back or forth by the +system administrator affecting long term measurements. + Since no other Linux multimedia +API supports unadjusted time it would be foolish to introduce here. We +must use a universally supported clock to synchronize different media, +hence time of day. + + + + struct <structname>v4l2_buffer</structname> + + &cs-ustr; + + + __u32 + index + + Number of the buffer, set by the application. This +field is only used for memory mapping I/O +and can range from zero to the number of buffers allocated +with the &VIDIOC-REQBUFS; ioctl (&v4l2-requestbuffers; count) minus one. + + + &v4l2-buf-type; + type + + Type of the buffer, same as &v4l2-format; +type or &v4l2-requestbuffers; +type, set by the application. + + + __u32 + bytesused + + The number of bytes occupied by the data in the +buffer. It depends on the negotiated data format and may change with +each buffer for compressed variable size data like JPEG images. +Drivers must set this field when type +refers to an input stream, applications when an output stream. + + + __u32 + flags + + Flags set by the application or driver, see . + + + &v4l2-field; + field + + Indicates the field order of the image in the +buffer, see . This field is not used when +the buffer contains VBI data. Drivers must set it when +type refers to an input stream, +applications when an output stream. + + + struct timeval + timestamp + + For input streams this is the +system time (as returned by the gettimeofday() +function) when the first data byte was captured. For output streams +the data will not be displayed before this time, secondary to the +nominal frame rate determined by the current video standard in +enqueued order. Applications can for example zero this field to +display frames as soon as possible. The driver stores the time at +which the first data byte was actually sent out in the +timestamp field. This permits +applications to monitor the drift between the video and system +clock. + + + &v4l2-timecode; + timecode + + When type is +V4L2_BUF_TYPE_VIDEO_CAPTURE and the +V4L2_BUF_FLAG_TIMECODE flag is set in +flags, this structure contains a frame +timecode. In V4L2_FIELD_ALTERNATE +mode the top and bottom field contain the same timecode. +Timecodes are intended to help video editing and are typically recorded on +video tapes, but also embedded in compressed formats like MPEG. This +field is independent of the timestamp and +sequence fields. + + + __u32 + sequence + + Set by the driver, counting the frames in the +sequence. + + + In V4L2_FIELD_ALTERNATE mode the top and +bottom field have the same sequence number. The count starts at zero +and includes dropped or repeated frames. A dropped frame was received +by an input device but could not be stored due to lack of free buffer +space. A repeated frame was displayed again by an output device +because the application did not pass new data in +time.Note this may count the frames received +e.g. over USB, without taking into account the frames dropped by the +remote hardware due to limited compression throughput or bus +bandwidth. These devices identify by not enumerating any video +standards, see . + + + &v4l2-memory; + memory + + This field must be set by applications and/or drivers +in accordance with the selected I/O method. + + + union + m + + + + __u32 + offset + When memory is +V4L2_MEMORY_MMAP this is the offset of the buffer +from the start of the device memory. The value is returned by the +driver and apart of serving as parameter to the &func-mmap; function +not useful for applications. See for details. + + + + unsigned long + userptr + When memory is +V4L2_MEMORY_USERPTR this is a pointer to the +buffer (casted to unsigned long type) in virtual memory, set by the +application. See for details. + + + __u32 + length + + Size of the buffer (not the payload) in bytes. + + + __u32 + input + + Some video capture drivers support rapid and +synchronous video input changes, a function useful for example in +video surveillance applications. For this purpose applications set the +V4L2_BUF_FLAG_INPUT flag, and this field to the +number of a video input as in &v4l2-input; field +index. + + + __u32 + reserved + + A place holder for future extensions and custom +(driver defined) buffer types +V4L2_BUF_TYPE_PRIVATE and higher. + + + +
+ + + enum v4l2_buf_type + + &cs-def; + + + V4L2_BUF_TYPE_VIDEO_CAPTURE + 1 + Buffer of a video capture stream, see . + + + V4L2_BUF_TYPE_VIDEO_OUTPUT + 2 + Buffer of a video output stream, see . + + + V4L2_BUF_TYPE_VIDEO_OVERLAY + 3 + Buffer for video overlay, see . + + + V4L2_BUF_TYPE_VBI_CAPTURE + 4 + Buffer of a raw VBI capture stream, see . + + + V4L2_BUF_TYPE_VBI_OUTPUT + 5 + Buffer of a raw VBI output stream, see . + + + V4L2_BUF_TYPE_SLICED_VBI_CAPTURE + 6 + Buffer of a sliced VBI capture stream, see . + + + V4L2_BUF_TYPE_SLICED_VBI_OUTPUT + 7 + Buffer of a sliced VBI output stream, see . + + + V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY + 8 + Buffer for video output overlay (OSD), see . Status: Experimental. + + + V4L2_BUF_TYPE_PRIVATE + 0x80 + This and higher values are reserved for custom +(driver defined) buffer types. + + + +
+ + + Buffer Flags + + &cs-def; + + + V4L2_BUF_FLAG_MAPPED + 0x0001 + The buffer resides in device memory and has been mapped +into the application's address space, see for details. +Drivers set or clear this flag when the +VIDIOC_QUERYBUF, VIDIOC_QBUF or VIDIOC_DQBUF ioctl is called. Set by the driver. + + + V4L2_BUF_FLAG_QUEUED + 0x0002 + Internally drivers maintain two buffer queues, an +incoming and outgoing queue. When this flag is set, the buffer is +currently on the incoming queue. It automatically moves to the +outgoing queue after the buffer has been filled (capture devices) or +displayed (output devices). Drivers set or clear this flag when the +VIDIOC_QUERYBUF ioctl is called. After +(successful) calling the VIDIOC_QBUF ioctl it is +always set and after VIDIOC_DQBUF always +cleared. + + + V4L2_BUF_FLAG_DONE + 0x0004 + When this flag is set, the buffer is currently on +the outgoing queue, ready to be dequeued from the driver. Drivers set +or clear this flag when the VIDIOC_QUERYBUF ioctl +is called. After calling the VIDIOC_QBUF or +VIDIOC_DQBUF it is always cleared. Of course a +buffer cannot be on both queues at the same time, the +V4L2_BUF_FLAG_QUEUED and +V4L2_BUF_FLAG_DONE flag are mutually exclusive. +They can be both cleared however, then the buffer is in "dequeued" +state, in the application domain to say so. + + + V4L2_BUF_FLAG_KEYFRAME + 0x0008 + Drivers set or clear this flag when calling the +VIDIOC_DQBUF ioctl. It may be set by video +capture devices when the buffer contains a compressed image which is a +key frame (or field), &ie; can be decompressed on its own. + + + V4L2_BUF_FLAG_PFRAME + 0x0010 + Similar to V4L2_BUF_FLAG_KEYFRAME +this flags predicted frames or fields which contain only differences to a +previous key frame. + + + V4L2_BUF_FLAG_BFRAME + 0x0020 + Similar to V4L2_BUF_FLAG_PFRAME + this is a bidirectional predicted frame or field. [ooc tbd] + + + V4L2_BUF_FLAG_TIMECODE + 0x0100 + The timecode field is valid. +Drivers set or clear this flag when the VIDIOC_DQBUF +ioctl is called. + + + V4L2_BUF_FLAG_INPUT + 0x0200 + The input field is valid. +Applications set or clear this flag before calling the +VIDIOC_QBUF ioctl. + + + +
+ + + enum v4l2_memory + + &cs-def; + + + V4L2_MEMORY_MMAP + 1 + The buffer is used for memory +mapping I/O. + + + V4L2_MEMORY_USERPTR + 2 + The buffer is used for user +pointer I/O. + + + V4L2_MEMORY_OVERLAY + 3 + [to do] + + + +
+ +
+ Timecodes + + The v4l2_timecode structure is +designed to hold a or similar timecode. +(struct timeval timestamps are stored in +&v4l2-buffer; field timestamp.) + + + struct <structname>v4l2_timecode</structname> + + &cs-str; + + + __u32 + type + Frame rate the timecodes are based on, see . + + + __u32 + flags + Timecode flags, see . + + + __u8 + frames + Frame count, 0 ... 23/24/29/49/59, depending on the + type of timecode. + + + __u8 + seconds + Seconds count, 0 ... 59. This is a binary, not BCD number. + + + __u8 + minutes + Minutes count, 0 ... 59. This is a binary, not BCD number. + + + __u8 + hours + Hours count, 0 ... 29. This is a binary, not BCD number. + + + __u8 + userbits[4] + The "user group" bits from the timecode. + + + +
+ + + Timecode Types + + &cs-def; + + + V4L2_TC_TYPE_24FPS + 1 + 24 frames per second, i. e. film. + + + V4L2_TC_TYPE_25FPS + 2 + 25 frames per second, &ie; PAL or SECAM video. + + + V4L2_TC_TYPE_30FPS + 3 + 30 frames per second, &ie; NTSC video. + + + V4L2_TC_TYPE_50FPS + 4 + + + + V4L2_TC_TYPE_60FPS + 5 + + + + +
+ + + Timecode Flags + + &cs-def; + + + V4L2_TC_FLAG_DROPFRAME + 0x0001 + Indicates "drop frame" semantics for counting frames +in 29.97 fps material. When set, frame numbers 0 and 1 at the start of +each minute, except minutes 0, 10, 20, 30, 40, 50 are omitted from the +count. + + + V4L2_TC_FLAG_COLORFRAME + 0x0002 + The "color frame" flag. + + + V4L2_TC_USERBITS_field + 0x000C + Field mask for the "binary group flags". + + + V4L2_TC_USERBITS_USERDEFINED + 0x0000 + Unspecified format. + + + V4L2_TC_USERBITS_8BITCHARS + 0x0008 + 8-bit ISO characters. + + + +
+
+
+ +
+ Field Order + + We have to distinguish between progressive and interlaced +video. Progressive video transmits all lines of a video image +sequentially. Interlaced video divides an image into two fields, +containing only the odd and even lines of the image, respectively. +Alternating the so called odd and even field are transmitted, and due +to a small delay between fields a cathode ray TV displays the lines +interleaved, yielding the original frame. This curious technique was +invented because at refresh rates similar to film the image would +fade out too quickly. Transmitting fields reduces the flicker without +the necessity of doubling the frame rate and with it the bandwidth +required for each channel. + + It is important to understand a video camera does not expose +one frame at a time, merely transmitting the frames separated into +fields. The fields are in fact captured at two different instances in +time. An object on screen may well move between one field and the +next. For applications analysing motion it is of paramount importance +to recognize which field of a frame is older, the temporal +order. + + When the driver provides or accepts images field by field +rather than interleaved, it is also important applications understand +how the fields combine to frames. We distinguish between top and +bottom fields, the spatial order: The first line +of the top field is the first line of an interlaced frame, the first +line of the bottom field is the second line of that frame. + + However because fields were captured one after the other, +arguing whether a frame commences with the top or bottom field is +pointless. Any two successive top and bottom, or bottom and top fields +yield a valid frame. Only when the source was progressive to begin +with, ⪚ when transferring film to video, two fields may come from +the same frame, creating a natural order. + + Counter to intuition the top field is not necessarily the +older field. Whether the older field contains the top or bottom lines +is a convention determined by the video standard. Hence the +distinction between temporal and spatial order of fields. The diagrams +below should make this clearer. + + All video capture and output devices must report the current +field order. Some drivers may permit the selection of a different +order, to this end applications initialize the +field field of &v4l2-pix-format; before +calling the &VIDIOC-S-FMT; ioctl. If this is not desired it should +have the value V4L2_FIELD_ANY (0). + + + enum v4l2_field + + &cs-def; + + + V4L2_FIELD_ANY + 0 + Applications request this field order when any +one of the V4L2_FIELD_NONE, +V4L2_FIELD_TOP, +V4L2_FIELD_BOTTOM, or +V4L2_FIELD_INTERLACED formats is acceptable. +Drivers choose depending on hardware capabilities or e. g. the +requested image size, and return the actual field order. &v4l2-buffer; +field can never be +V4L2_FIELD_ANY. + + + V4L2_FIELD_NONE + 1 + Images are in progressive format, not interlaced. +The driver may also indicate this order when it cannot distinguish +between V4L2_FIELD_TOP and +V4L2_FIELD_BOTTOM. + + + V4L2_FIELD_TOP + 2 + Images consist of the top field only. + + + V4L2_FIELD_BOTTOM + 3 + Images consist of the bottom field only. +Applications may wish to prevent a device from capturing interlaced +images because they will have "comb" or "feathering" artefacts around +moving objects. + + + V4L2_FIELD_INTERLACED + 4 + Images contain both fields, interleaved line by +line. The temporal order of the fields (whether the top or bottom +field is first transmitted) depends on the current video standard. +M/NTSC transmits the bottom field first, all other standards the top +field first. + + + V4L2_FIELD_SEQ_TB + 5 + Images contain both fields, the top field lines +are stored first in memory, immediately followed by the bottom field +lines. Fields are always stored in temporal order, the older one first +in memory. Image sizes refer to the frame, not fields. + + + V4L2_FIELD_SEQ_BT + 6 + Images contain both fields, the bottom field +lines are stored first in memory, immediately followed by the top +field lines. Fields are always stored in temporal order, the older one +first in memory. Image sizes refer to the frame, not fields. + + + V4L2_FIELD_ALTERNATE + 7 + The two fields of a frame are passed in separate +buffers, in temporal order, &ie; the older one first. To indicate the field +parity (whether the current field is a top or bottom field) the driver +or application, depending on data direction, must set &v4l2-buffer; +field to +V4L2_FIELD_TOP or +V4L2_FIELD_BOTTOM. Any two successive fields pair +to build a frame. If fields are successive, without any dropped fields +between them (fields can drop individually), can be determined from +the &v4l2-buffer; sequence field. Image +sizes refer to the frame, not fields. This format cannot be selected +when using the read/write I/O method. + + + V4L2_FIELD_INTERLACED_TB + 8 + Images contain both fields, interleaved line by +line, top field first. The top field is transmitted first. + + + V4L2_FIELD_INTERLACED_BT + 9 + Images contain both fields, interleaved line by +line, top field first. The bottom field is transmitted first. + + + +
+ +
+ Field Order, Top Field First Transmitted + + + + + + + + +
+ +
+ Field Order, Bottom Field First Transmitted + + + + + + + + +
+
+ + diff --git a/Documentation/DocBook/v4l/keytable.c.xml b/Documentation/DocBook/v4l/keytable.c.xml new file mode 100644 index 00000000000..d53254a3be1 --- /dev/null +++ b/Documentation/DocBook/v4l/keytable.c.xml @@ -0,0 +1,172 @@ + +/* keytable.c - This program allows checking/replacing keys at IR + + Copyright (C) 2006-2009 Mauro Carvalho Chehab <mchehab@infradead.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + */ + +#include <ctype.h> +#include <errno.h> +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <linux/input.h> +#include <sys/ioctl.h> + +#include "parse.h" + +void prtcode (int *codes) +{ + struct parse_key *p; + + for (p=keynames;p->name!=NULL;p++) { + if (p->value == (unsigned)codes[1]) { + printf("scancode 0x%04x = %s (0x%02x)\n", codes[0], p->name, codes[1]); + return; + } + } + + if (isprint (codes[1])) + printf("scancode %d = '%c' (0x%02x)\n", codes[0], codes[1], codes[1]); + else + printf("scancode %d = 0x%02x\n", codes[0], codes[1]); +} + +int parse_code(char *string) +{ + struct parse_key *p; + + for (p=keynames;p->name!=NULL;p++) { + if (!strcasecmp(p->name, string)) { + return p->value; + } + } + return -1; +} + +int main (int argc, char *argv[]) +{ + int fd; + unsigned int i, j; + int codes[2]; + + if (argc<2 || argc>4) { + printf ("usage: %s <device> to get table; or\n" + " %s <device> <scancode> <keycode>\n" + " %s <device> <keycode_file>\n",*argv,*argv,*argv); + return -1; + } + + if ((fd = open(argv[1], O_RDONLY)) < 0) { + perror("Couldn't open input device"); + return(-1); + } + + if (argc==4) { + int value; + + value=parse_code(argv[3]); + + if (value==-1) { + value = strtol(argv[3], NULL, 0); + if (errno) + perror("value"); + } + + codes [0] = (unsigned) strtol(argv[2], NULL, 0); + codes [1] = (unsigned) value; + + if(ioctl(fd, EVIOCSKEYCODE, codes)) + perror ("EVIOCSKEYCODE"); + + if(ioctl(fd, EVIOCGKEYCODE, codes)==0) + prtcode(codes); + return 0; + } + + if (argc==3) { + FILE *fin; + int value; + char *scancode, *keycode, s[2048]; + + fin=fopen(argv[2],"r"); + if (fin==NULL) { + perror ("opening keycode file"); + return -1; + } + + /* Clears old table */ + for (j = 0; j < 256; j++) { + for (i = 0; i < 256; i++) { + codes[0] = (j << 8) | i; + codes[1] = KEY_RESERVED; + ioctl(fd, EVIOCSKEYCODE, codes); + } + } + + while (fgets(s,sizeof(s),fin)) { + scancode=strtok(s,"\n\t =:"); + if (!scancode) { + perror ("parsing input file scancode"); + return -1; + } + if (!strcasecmp(scancode, "scancode")) { + scancode = strtok(NULL,"\n\t =:"); + if (!scancode) { + perror ("parsing input file scancode"); + return -1; + } + } + + keycode=strtok(NULL,"\n\t =:("); + if (!keycode) { + perror ("parsing input file keycode"); + return -1; + } + + // printf ("parsing %s=%s:", scancode, keycode); + value=parse_code(keycode); + // printf ("\tvalue=%d\n",value); + + if (value==-1) { + value = strtol(keycode, NULL, 0); + if (errno) + perror("value"); + } + + codes [0] = (unsigned) strtol(scancode, NULL, 0); + codes [1] = (unsigned) value; + + // printf("\t%04x=%04x\n",codes[0], codes[1]); + if(ioctl(fd, EVIOCSKEYCODE, codes)) { + fprintf(stderr, "Setting scancode 0x%04x with 0x%04x via ",codes[0], codes[1]); + perror ("EVIOCSKEYCODE"); + } + + if(ioctl(fd, EVIOCGKEYCODE, codes)==0) + prtcode(codes); + } + return 0; + } + + /* Get scancode table */ + for (j = 0; j < 256; j++) { + for (i = 0; i < 256; i++) { + codes[0] = (j << 8) | i; + if (!ioctl(fd, EVIOCGKEYCODE, codes) && codes[1] != KEY_RESERVED) + prtcode(codes); + } + } + return 0; +} + + diff --git a/Documentation/DocBook/v4l/libv4l.xml b/Documentation/DocBook/v4l/libv4l.xml new file mode 100644 index 00000000000..c14fc3db2a8 --- /dev/null +++ b/Documentation/DocBook/v4l/libv4l.xml @@ -0,0 +1,167 @@ +Libv4l Userspace Library +
+ Introduction + + libv4l is a collection of libraries which adds a thin abstraction +layer on top of video4linux2 devices. The purpose of this (thin) layer +is to make it easy for application writers to support a wide variety of +devices without having to write separate code for different devices in the +same class. +An example of using libv4l is provided by +v4l2grab. + + + libv4l consists of 3 different libraries: +
+ libv4lconvert + + libv4lconvert is a library that converts several +different pixelformats found in V4L2 drivers into a few common RGB and +YUY formats. + It currently accepts the following V4L2 driver formats: +V4L2_PIX_FMT_BGR24, +V4L2_PIX_FMT_HM12, +V4L2_PIX_FMT_JPEG, +V4L2_PIX_FMT_MJPEG, +V4L2_PIX_FMT_MR97310A, +V4L2_PIX_FMT_OV511, +V4L2_PIX_FMT_OV518, +V4L2_PIX_FMT_PAC207, +V4L2_PIX_FMT_PJPG, +V4L2_PIX_FMT_RGB24, +V4L2_PIX_FMT_SBGGR8, +V4L2_PIX_FMT_SGBRG8, +V4L2_PIX_FMT_SGRBG8, +V4L2_PIX_FMT_SN9C10X, +V4L2_PIX_FMT_SN9C20X_I420, +V4L2_PIX_FMT_SPCA501, +V4L2_PIX_FMT_SPCA505, +V4L2_PIX_FMT_SPCA508, +V4L2_PIX_FMT_SPCA561, +V4L2_PIX_FMT_SQ905C, +V4L2_PIX_FMT_SRGGB8, +V4L2_PIX_FMT_UYVY, +V4L2_PIX_FMT_YUV420, +V4L2_PIX_FMT_YUYV, +V4L2_PIX_FMT_YVU420, +and V4L2_PIX_FMT_YVYU. + + Later on libv4lconvert was expanded to also be able to do +various video processing functions to improve webcam video quality. +The video processing is split in to 2 parts: libv4lconvert/control and +libv4lconvert/processing. + + The control part is used to offer video controls which can +be used to control the video processing functions made available by + libv4lconvert/processing. These controls are stored application wide +(until reboot) by using a persistent shared memory object. + + libv4lconvert/processing offers the actual video +processing functionality. +
+
+ libv4l1 + This library offers functions that can be used to quickly +make v4l1 applications work with v4l2 devices. These functions work exactly +like the normal open/close/etc, except that libv4l1 does full emulation of +the v4l1 api on top of v4l2 drivers, in case of v4l1 drivers it +will just pass calls through. + Since those functions are emulations of the old V4L1 API, +it shouldn't be used for new applications. +
+
+ libv4l2 + This library should be used for all modern V4L2 +applications. + It provides handles to call V4L2 open/ioctl/close/poll +methods. Instead of just providing the raw output of the device, it enhances +the calls in the sense that it will use libv4lconvert to provide more video +formats and to enhance the image quality. + In most cases, libv4l2 just passes the calls directly +through to the v4l2 driver, intercepting the calls to +VIDIOC_TRY_FMT, +VIDIOC_G_FMT +VIDIOC_S_FMT +VIDIOC_ENUM_FRAMESIZES +and VIDIOC_ENUM_FRAMEINTERVALS +in order to emulate the formats +V4L2_PIX_FMT_BGR24, +V4L2_PIX_FMT_RGB24, +V4L2_PIX_FMT_YUV420, +and V4L2_PIX_FMT_YVU420, +if they aren't available in the driver. +VIDIOC_ENUM_FMT +keeps enumerating the hardware supported formats, plus the emulated formats +offered by libv4l at the end. + +
+ Libv4l device control functions + The common file operation methods are provided by +libv4l. + Those functions operate just like glibc +open/close/dup/ioctl/read/mmap/munmap: + + int v4l2_open(const char *file, int oflag, +...) - +operates like the standard open() function. + + int v4l2_close(int fd) - +operates like the standard close() function. + + int v4l2_dup(int fd) - +operates like the standard dup() function, duplicating a file handler. + + int v4l2_ioctl (int fd, unsigned long int request, ...) - +operates like the standard ioctl() function. + + int v4l2_read (int fd, void* buffer, size_t n) - +operates like the standard read() function. + + void v4l2_mmap(void *start, size_t length, int prot, int flags, int fd, int64_t offset); - +operates like the standard mmap() function. + + int v4l2_munmap(void *_start, size_t length); - +operates like the standard munmap() function. + + + Those functions provide additional control: + + int v4l2_fd_open(int fd, int v4l2_flags) - +opens an already opened fd for further use through v4l2lib and possibly +modify libv4l2's default behavior through the v4l2_flags argument. +Currently, v4l2_flags can be V4L2_DISABLE_CONVERSION, +to disable format conversion. + + int v4l2_set_control(int fd, int cid, int value) - +This function takes a value of 0 - 65535, and then scales that range to +the actual range of the given v4l control id, and then if the cid exists +and is not locked sets the cid to the scaled value. + + int v4l2_get_control(int fd, int cid) - +This function returns a value of 0 - 65535, scaled to from the actual range +of the given v4l control id. when the cid does not exist, could not be +accessed for some reason, or some error occured 0 is returned. + + +
+
+
+ + v4l1compat.so wrapper library + + This library intercepts calls to +open/close/ioctl/mmap/mmunmap operations and redirects them to the libv4l +counterparts, by using LD_PRELOAD=/usr/lib/v4l1compat.so. It also +emulates V4L1 calls via V4L2 API. + It allows usage of binary legacy applications that +still don't use libv4l. +
+ +
+ diff --git a/Documentation/DocBook/v4l/pixfmt-grey.xml b/Documentation/DocBook/v4l/pixfmt-grey.xml new file mode 100644 index 00000000000..3b72bc6b2de --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-grey.xml @@ -0,0 +1,70 @@ + + + V4L2_PIX_FMT_GREY ('GREY') + &manvol; + + + V4L2_PIX_FMT_GREY + Grey-scale image + + + Description + + This is a grey-scale image. It is really a degenerate +Y'CbCr format which simply contains no Cb or Cr data. + + + <constant>V4L2_PIX_FMT_GREY</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Y'00 + Y'01 + Y'02 + Y'03 + + + start + 4: + Y'10 + Y'11 + Y'12 + Y'13 + + + start + 8: + Y'20 + Y'21 + Y'22 + Y'23 + + + start + 12: + Y'30 + Y'31 + Y'32 + Y'33 + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-nv12.xml b/Documentation/DocBook/v4l/pixfmt-nv12.xml new file mode 100644 index 00000000000..873f6703518 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-nv12.xml @@ -0,0 +1,151 @@ + + + V4L2_PIX_FMT_NV12 ('NV12'), V4L2_PIX_FMT_NV21 ('NV21') + &manvol; + + + V4L2_PIX_FMT_NV12 + V4L2_PIX_FMT_NV21 + Formats with ½ horizontal and vertical +chroma resolution, also known as YUV 4:2:0. One luminance and one +chrominance plane with alternating chroma samples as opposed to +V4L2_PIX_FMT_YVU420 + + + Description + + These are two-plane versions of the YUV 4:2:0 format. +The three components are separated into two sub-images or planes. The +Y plane is first. The Y plane has one byte per pixel. For +V4L2_PIX_FMT_NV12, a combined CbCr plane +immediately follows the Y plane in memory. The CbCr plane is the same +width, in bytes, as the Y plane (and of the image), but is half as +tall in pixels. Each CbCr pair belongs to four pixels. For example, +Cb0/Cr0 belongs to +Y'00, Y'01, +Y'10, Y'11. +V4L2_PIX_FMT_NV21 is the same except the Cb and +Cr bytes are swapped, the CrCb plane starts with a Cr byte. + + If the Y plane has pad bytes after each row, then the +CbCr plane has as many pad bytes after its rows. + + + <constant>V4L2_PIX_FMT_NV12</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Y'00 + Y'01 + Y'02 + Y'03 + + + start + 4: + Y'10 + Y'11 + Y'12 + Y'13 + + + start + 8: + Y'20 + Y'21 + Y'22 + Y'23 + + + start + 12: + Y'30 + Y'31 + Y'32 + Y'33 + + + start + 16: + Cb00 + Cr00 + Cb01 + Cr01 + + + start + 20: + Cb10 + Cr10 + Cb11 + Cr11 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YY + YY + + + + C + C + + + 1 + YY + YY + + + + + + 2 + YY + YY + + + + C + C + + + 3 + YY + YY + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-nv16.xml b/Documentation/DocBook/v4l/pixfmt-nv16.xml new file mode 100644 index 00000000000..26094035fc0 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-nv16.xml @@ -0,0 +1,174 @@ + + + V4L2_PIX_FMT_NV16 ('NV16'), V4L2_PIX_FMT_NV61 ('NV61') + &manvol; + + + V4L2_PIX_FMT_NV16 + V4L2_PIX_FMT_NV61 + Formats with ½ horizontal +chroma resolution, also known as YUV 4:2:2. One luminance and one +chrominance plane with alternating chroma samples as opposed to +V4L2_PIX_FMT_YVU420 + + + Description + + These are two-plane versions of the YUV 4:2:2 format. +The three components are separated into two sub-images or planes. The +Y plane is first. The Y plane has one byte per pixel. For +V4L2_PIX_FMT_NV16, a combined CbCr plane +immediately follows the Y plane in memory. The CbCr plane is the same +width and height, in bytes, as the Y plane (and of the image). +Each CbCr pair belongs to two pixels. For example, +Cb0/Cr0 belongs to +Y'00, Y'01. +V4L2_PIX_FMT_NV61 is the same except the Cb and +Cr bytes are swapped, the CrCb plane starts with a Cr byte. + + If the Y plane has pad bytes after each row, then the +CbCr plane has as many pad bytes after its rows. + + + <constant>V4L2_PIX_FMT_NV16</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Y'00 + Y'01 + Y'02 + Y'03 + + + start + 4: + Y'10 + Y'11 + Y'12 + Y'13 + + + start + 8: + Y'20 + Y'21 + Y'22 + Y'23 + + + start + 12: + Y'30 + Y'31 + Y'32 + Y'33 + + + start + 16: + Cb00 + Cr00 + Cb01 + Cr01 + + + start + 20: + Cb10 + Cr10 + Cb11 + Cr11 + + + start + 24: + Cb20 + Cr20 + Cb21 + Cr21 + + + start + 28: + Cb30 + Cr30 + Cb31 + Cr31 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YY + YY + + + + C + C + + + 1 + YY + YY + + + + C + C + + + + + + 2 + YY + YY + + + + C + C + + + 3 + YY + YY + + + + C + C + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml new file mode 100644 index 00000000000..d2dd697a81d --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml @@ -0,0 +1,862 @@ + + + Packed RGB formats + &manvol; + + + Packed RGB formats + Packed RGB formats + + + Description + + These formats are designed to match the pixel formats of +typical PC graphics frame buffers. They occupy 8, 16, 24 or 32 bits +per pixel. These are all packed-pixel formats, meaning all the data +for a pixel lie next to each other in memory. + + When one of these formats is used, drivers shall report the +colorspace V4L2_COLORSPACE_SRGB. + + + Packed RGB Image Formats + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Identifier + Code +   + Byte 0 in memory + Byte 1 + Byte 2 + Byte 3 + + +   +   + Bit + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 + + + + + V4L2_PIX_FMT_RGB332 + 'RGB1' + + b1 + b0 + g2 + g1 + g0 + r2 + r1 + r0 + + + V4L2_PIX_FMT_RGB444 + 'R444' + + g3 + g2 + g1 + g0 + b3 + b2 + b1 + b0 + + a3 + a2 + a1 + a0 + r3 + r2 + r1 + r0 + + + V4L2_PIX_FMT_RGB555 + 'RGBO' + + g2 + g1 + g0 + r4 + r3 + r2 + r1 + r0 + + a + b4 + b3 + b2 + b1 + b0 + g4 + g3 + + + V4L2_PIX_FMT_RGB565 + 'RGBP' + + g2 + g1 + g0 + r4 + r3 + r2 + r1 + r0 + + b4 + b3 + b2 + b1 + b0 + g5 + g4 + g3 + + + V4L2_PIX_FMT_RGB555X + 'RGBQ' + + a + b4 + b3 + b2 + b1 + b0 + g4 + g3 + + g2 + g1 + g0 + r4 + r3 + r2 + r1 + r0 + + + V4L2_PIX_FMT_RGB565X + 'RGBR' + + b4 + b3 + b2 + b1 + b0 + g5 + g4 + g3 + + g2 + g1 + g0 + r4 + r3 + r2 + r1 + r0 + + + V4L2_PIX_FMT_BGR24 + 'BGR3' + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + + V4L2_PIX_FMT_RGB24 + 'RGB3' + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + + V4L2_PIX_FMT_BGR32 + 'BGR4' + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + a7 + a6 + a5 + a4 + a3 + a2 + a1 + a0 + + + V4L2_PIX_FMT_RGB32 + 'RGB4' + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + a7 + a6 + a5 + a4 + a3 + a2 + a1 + a0 + + + +
+ + Bit 7 is the most significant bit. The value of a = alpha +bits is undefined when reading from the driver, ignored when writing +to the driver, except when alpha blending has been negotiated for a +Video Overlay or Video Output Overlay. + + + <constant>V4L2_PIX_FMT_BGR24</constant> 4 × 4 pixel +image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + B00 + G00 + R00 + B01 + G01 + R01 + B02 + G02 + R02 + B03 + G03 + R03 + + + start + 12: + B10 + G10 + R10 + B11 + G11 + R11 + B12 + G12 + R12 + B13 + G13 + R13 + + + start + 24: + B20 + G20 + R20 + B21 + G21 + R21 + B22 + G22 + R22 + B23 + G23 + R23 + + + start + 36: + B30 + G30 + R30 + B31 + G31 + R31 + B32 + G32 + R32 + B33 + G33 + R33 + + + + + + + + + + Drivers may interpret these formats differently. + + + Some RGB formats above are uncommon and were probably +defined in error. Drivers may interpret them as in . + + + Packed RGB Image Formats (corrected) + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Identifier + Code +   + Byte 0 in memory + Byte 1 + Byte 2 + Byte 3 + + +   +   + Bit + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 + + + + + V4L2_PIX_FMT_RGB332 + 'RGB1' + + r2 + r1 + r0 + g2 + g1 + g0 + b1 + b0 + + + V4L2_PIX_FMT_RGB444 + 'R444' + + g3 + g2 + g1 + g0 + b3 + b2 + b1 + b0 + + a3 + a2 + a1 + a0 + r3 + r2 + r1 + r0 + + + V4L2_PIX_FMT_RGB555 + 'RGBO' + + g2 + g1 + g0 + b4 + b3 + b2 + b1 + b0 + + a + r4 + r3 + r2 + r1 + r0 + g4 + g3 + + + V4L2_PIX_FMT_RGB565 + 'RGBP' + + g2 + g1 + g0 + b4 + b3 + b2 + b1 + b0 + + r4 + r3 + r2 + r1 + r0 + g5 + g4 + g3 + + + V4L2_PIX_FMT_RGB555X + 'RGBQ' + + a + r4 + r3 + r2 + r1 + r0 + g4 + g3 + + g2 + g1 + g0 + b4 + b3 + b2 + b1 + b0 + + + V4L2_PIX_FMT_RGB565X + 'RGBR' + + r4 + r3 + r2 + r1 + r0 + g5 + g4 + g3 + + g2 + g1 + g0 + b4 + b3 + b2 + b1 + b0 + + + V4L2_PIX_FMT_BGR24 + 'BGR3' + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + + V4L2_PIX_FMT_RGB24 + 'RGB3' + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + + V4L2_PIX_FMT_BGR32 + 'BGR4' + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + a7 + a6 + a5 + a4 + a3 + a2 + a1 + a0 + + + V4L2_PIX_FMT_RGB32 + 'RGB4' + + a7 + a6 + a5 + a4 + a3 + a2 + a1 + a0 + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + + +
+ + A test utility to determine which RGB formats a driver +actually supports is available from the LinuxTV v4l-dvb repository. +See &v4l-dvb; for access instructions. + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-packed-yuv.xml b/Documentation/DocBook/v4l/pixfmt-packed-yuv.xml new file mode 100644 index 00000000000..3cab5d0ca75 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-packed-yuv.xml @@ -0,0 +1,244 @@ + + + Packed YUV formats + &manvol; + + + Packed YUV formats + Packed YUV formats + + + Description + + Similar to the packed RGB formats these formats store +the Y, Cb and Cr component of each pixel in one 16 or 32 bit +word. + + + Packed YUV Image Formats + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Identifier + Code +   + Byte 0 in memory + Byte 1 + Byte 2 + Byte 3 + + +   +   + Bit + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 + + + + + V4L2_PIX_FMT_YUV444 + 'Y444' + + Cb3 + Cb2 + Cb1 + Cb0 + Cr3 + Cr2 + Cr1 + Cr0 + + a3 + a2 + a1 + a0 + Y'3 + Y'2 + Y'1 + Y'0 + + + + V4L2_PIX_FMT_YUV555 + 'YUVO' + + Cb2 + Cb1 + Cb0 + Cr4 + Cr3 + Cr2 + Cr1 + Cr0 + + a + Y'4 + Y'3 + Y'2 + Y'1 + Y'0 + Cb4 + Cb3 + + + + V4L2_PIX_FMT_YUV565 + 'YUVP' + + Cb2 + Cb1 + Cb0 + Cr4 + Cr3 + Cr2 + Cr1 + Cr0 + + Y'4 + Y'3 + Y'2 + Y'1 + Y'0 + Cb5 + Cb4 + Cb3 + + + + V4L2_PIX_FMT_YUV32 + 'YUV4' + + a7 + a6 + a5 + a4 + a3 + a2 + a1 + a0 + + Y'7 + Y'6 + Y'5 + Y'4 + Y'3 + Y'2 + Y'1 + Y'0 + + Cb7 + Cb6 + Cb5 + Cb4 + Cb3 + Cb2 + Cb1 + Cb0 + + Cr7 + Cr6 + Cr5 + Cr4 + Cr3 + Cr2 + Cr1 + Cr0 + + + +
+ + Bit 7 is the most significant bit. The value of a = alpha +bits is undefined when reading from the driver, ignored when writing +to the driver, except when alpha blending has been negotiated for a +Video Overlay or Video Output Overlay. + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-sbggr16.xml b/Documentation/DocBook/v4l/pixfmt-sbggr16.xml new file mode 100644 index 00000000000..519a9efbac1 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-sbggr16.xml @@ -0,0 +1,91 @@ + + + V4L2_PIX_FMT_SBGGR16 ('BYR2') + &manvol; + + + V4L2_PIX_FMT_SBGGR16 + Bayer RGB format + + + Description + + This format is similar to +V4L2_PIX_FMT_SBGGR8, except each pixel has +a depth of 16 bits. The least significant byte is stored at lower +memory addresses (little-endian). Note the actual sampling precision +may be lower than 16 bits, for example 10 bits per pixel with values +in range 0 to 1023. + + + <constant>V4L2_PIX_FMT_SBGGR16</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + B00low + B00high + G01low + G01high + B02low + B02high + G03low + G03high + + + start + 8: + G10low + G10high + R11low + R11high + G12low + G12high + R13low + R13high + + + start + 16: + B20low + B20high + G21low + G21high + B22low + B22high + G23low + G23high + + + start + 24: + G30low + G30high + R31low + R31high + G32low + G32high + R33low + R33high + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-sbggr8.xml b/Documentation/DocBook/v4l/pixfmt-sbggr8.xml new file mode 100644 index 00000000000..5fe84ecc2eb --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-sbggr8.xml @@ -0,0 +1,75 @@ + + + V4L2_PIX_FMT_SBGGR8 ('BA81') + &manvol; + + + V4L2_PIX_FMT_SBGGR8 + Bayer RGB format + + + Description + + This is commonly the native format of digital cameras, +reflecting the arrangement of sensors on the CCD device. Only one red, +green or blue value is given for each pixel. Missing components must +be interpolated from neighbouring pixels. From left to right the first +row consists of a blue and green value, the second row of a green and +red value. This scheme repeats to the right and down for every two +columns and rows. + + + <constant>V4L2_PIX_FMT_SBGGR8</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + B00 + G01 + B02 + G03 + + + start + 4: + G10 + R11 + G12 + R13 + + + start + 8: + B20 + G21 + B22 + G23 + + + start + 12: + G30 + R31 + G32 + R33 + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-sgbrg8.xml b/Documentation/DocBook/v4l/pixfmt-sgbrg8.xml new file mode 100644 index 00000000000..d67a472b088 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-sgbrg8.xml @@ -0,0 +1,75 @@ + + + V4L2_PIX_FMT_SGBRG8 ('GBRG') + &manvol; + + + V4L2_PIX_FMT_SGBRG8 + Bayer RGB format + + + Description + + This is commonly the native format of digital cameras, +reflecting the arrangement of sensors on the CCD device. Only one red, +green or blue value is given for each pixel. Missing components must +be interpolated from neighbouring pixels. From left to right the first +row consists of a green and blue value, the second row of a red and +green value. This scheme repeats to the right and down for every two +columns and rows. + + + <constant>V4L2_PIX_FMT_SGBRG8</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + G00 + B01 + G02 + B03 + + + start + 4: + R10 + G11 + R12 + G13 + + + start + 8: + G20 + B21 + G22 + B23 + + + start + 12: + R30 + G31 + R32 + G33 + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-sgrbg8.xml b/Documentation/DocBook/v4l/pixfmt-sgrbg8.xml new file mode 100644 index 00000000000..0cdf13b8ac1 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-sgrbg8.xml @@ -0,0 +1,75 @@ + + + V4L2_PIX_FMT_SGRBG8 ('GRBG') + &manvol; + + + V4L2_PIX_FMT_SGRBG8 + Bayer RGB format + + + Description + + This is commonly the native format of digital cameras, +reflecting the arrangement of sensors on the CCD device. Only one red, +green or blue value is given for each pixel. Missing components must +be interpolated from neighbouring pixels. From left to right the first +row consists of a green and blue value, the second row of a red and +green value. This scheme repeats to the right and down for every two +columns and rows. + + + <constant>V4L2_PIX_FMT_SGRBG8</constant> 4 × +4 pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + G00 + R01 + G02 + R03 + + + start + 4: + R10 + B11 + R12 + B13 + + + start + 8: + G20 + R21 + G22 + R23 + + + start + 12: + R30 + B31 + R32 + B33 + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-uyvy.xml b/Documentation/DocBook/v4l/pixfmt-uyvy.xml new file mode 100644 index 00000000000..816c8d467c1 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-uyvy.xml @@ -0,0 +1,128 @@ + + + V4L2_PIX_FMT_UYVY ('UYVY') + &manvol; + + + V4L2_PIX_FMT_UYVY + Variation of +V4L2_PIX_FMT_YUYV with different order of samples +in memory + + + Description + + In this format each four bytes is two pixels. Each four +bytes is two Y's, a Cb and a Cr. Each Y goes to one of the pixels, and +the Cb and Cr belong to both pixels. As you can see, the Cr and Cb +components have half the horizontal resolution of the Y +component. + + + <constant>V4L2_PIX_FMT_UYVY</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Cb00 + Y'00 + Cr00 + Y'01 + Cb01 + Y'02 + Cr01 + Y'03 + + + start + 8: + Cb10 + Y'10 + Cr10 + Y'11 + Cb11 + Y'12 + Cr11 + Y'13 + + + start + 16: + Cb20 + Y'20 + Cr20 + Y'21 + Cb21 + Y'22 + Cr21 + Y'23 + + + start + 24: + Cb30 + Y'30 + Cr30 + Y'31 + Cb31 + Y'32 + Cr31 + Y'33 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YCY + YCY + + + 1 + YCY + YCY + + + 2 + YCY + YCY + + + 3 + YCY + YCY + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-vyuy.xml b/Documentation/DocBook/v4l/pixfmt-vyuy.xml new file mode 100644 index 00000000000..61f12a5e68d --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-vyuy.xml @@ -0,0 +1,128 @@ + + + V4L2_PIX_FMT_VYUY ('VYUY') + &manvol; + + + V4L2_PIX_FMT_VYUY + Variation of +V4L2_PIX_FMT_YUYV with different order of samples +in memory + + + Description + + In this format each four bytes is two pixels. Each four +bytes is two Y's, a Cb and a Cr. Each Y goes to one of the pixels, and +the Cb and Cr belong to both pixels. As you can see, the Cr and Cb +components have half the horizontal resolution of the Y +component. + + + <constant>V4L2_PIX_FMT_VYUY</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Cr00 + Y'00 + Cb00 + Y'01 + Cr01 + Y'02 + Cb01 + Y'03 + + + start + 8: + Cr10 + Y'10 + Cb10 + Y'11 + Cr11 + Y'12 + Cb11 + Y'13 + + + start + 16: + Cr20 + Y'20 + Cb20 + Y'21 + Cr21 + Y'22 + Cb21 + Y'23 + + + start + 24: + Cr30 + Y'30 + Cb30 + Y'31 + Cr31 + Y'32 + Cb31 + Y'33 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YCY + YCY + + + 1 + YCY + YCY + + + 2 + YCY + YCY + + + 3 + YCY + YCY + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-y16.xml b/Documentation/DocBook/v4l/pixfmt-y16.xml new file mode 100644 index 00000000000..d5840401507 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-y16.xml @@ -0,0 +1,89 @@ + + + V4L2_PIX_FMT_Y16 ('Y16 ') + &manvol; + + + V4L2_PIX_FMT_Y16 + Grey-scale image + + + Description + + This is a grey-scale image with a depth of 16 bits per +pixel. The least significant byte is stored at lower memory addresses +(little-endian). Note the actual sampling precision may be lower than +16 bits, for example 10 bits per pixel with values in range 0 to +1023. + + + <constant>V4L2_PIX_FMT_Y16</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Y'00low + Y'00high + Y'01low + Y'01high + Y'02low + Y'02high + Y'03low + Y'03high + + + start + 8: + Y'10low + Y'10high + Y'11low + Y'11high + Y'12low + Y'12high + Y'13low + Y'13high + + + start + 16: + Y'20low + Y'20high + Y'21low + Y'21high + Y'22low + Y'22high + Y'23low + Y'23high + + + start + 24: + Y'30low + Y'30high + Y'31low + Y'31high + Y'32low + Y'32high + Y'33low + Y'33high + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-y41p.xml b/Documentation/DocBook/v4l/pixfmt-y41p.xml new file mode 100644 index 00000000000..73c8536efb0 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-y41p.xml @@ -0,0 +1,157 @@ + + + V4L2_PIX_FMT_Y41P ('Y41P') + &manvol; + + + V4L2_PIX_FMT_Y41P + Format with ¼ horizontal chroma +resolution, also known as YUV 4:1:1 + + + Description + + In this format each 12 bytes is eight pixels. In the +twelve bytes are two CbCr pairs and eight Y's. The first CbCr pair +goes with the first four Y's, and the second CbCr pair goes with the +other four Y's. The Cb and Cr components have one fourth the +horizontal resolution of the Y component. + + Do not confuse this format with V4L2_PIX_FMT_YUV411P. +Y41P is derived from "YUV 4:1:1 packed", while +YUV411P stands for "YUV 4:1:1 planar". + + + <constant>V4L2_PIX_FMT_Y41P</constant> 8 × 4 +pixel image + + + Byte Order + Each cell is one byte. + + + + + + start + 0: + Cb00 + Y'00 + Cr00 + Y'01 + Cb01 + Y'02 + Cr01 + Y'03 + Y'04 + Y'05 + Y'06 + Y'07 + + + start + 12: + Cb10 + Y'10 + Cr10 + Y'11 + Cb11 + Y'12 + Cr11 + Y'13 + Y'14 + Y'15 + Y'16 + Y'17 + + + start + 24: + Cb20 + Y'20 + Cr20 + Y'21 + Cb21 + Y'22 + Cr21 + Y'23 + Y'24 + Y'25 + Y'26 + Y'27 + + + start + 36: + Cb30 + Y'30 + Cr30 + Y'31 + Cb31 + Y'32 + Cr31 + Y'33 + Y'34 + Y'35 + Y'36 + Y'37 + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + 45 + 67 + + + 0 + YYC + YY + YYC + YY + + + 1 + YYC + YY + YYC + YY + + + 2 + YYC + YY + YYC + YY + + + 3 + YYC + YY + YYC + YY + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-yuv410.xml b/Documentation/DocBook/v4l/pixfmt-yuv410.xml new file mode 100644 index 00000000000..8eb4a193d77 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-yuv410.xml @@ -0,0 +1,141 @@ + + + V4L2_PIX_FMT_YVU410 ('YVU9'), V4L2_PIX_FMT_YUV410 ('YUV9') + &manvol; + + + V4L2_PIX_FMT_YVU410 + V4L2_PIX_FMT_YUV410 + Planar formats with ¼ horizontal and +vertical chroma resolution, also known as YUV 4:1:0 + + + Description + + These are planar formats, as opposed to a packed format. +The three components are separated into three sub-images or planes. +The Y plane is first. The Y plane has one byte per pixel. For +V4L2_PIX_FMT_YVU410, the Cr plane immediately +follows the Y plane in memory. The Cr plane is ¼ the width and +¼ the height of the Y plane (and of the image). Each Cr belongs +to 16 pixels, a four-by-four square of the image. Following the Cr +plane is the Cb plane, just like the Cr plane. +V4L2_PIX_FMT_YUV410 is the same, except the Cb +plane comes first, then the Cr plane. + + If the Y plane has pad bytes after each row, then the Cr +and Cb planes have ¼ as many pad bytes after their rows. In +other words, four Cx rows (including padding) are exactly as long as +one Y row (including padding). + + + <constant>V4L2_PIX_FMT_YVU410</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Y'00 + Y'01 + Y'02 + Y'03 + + + start + 4: + Y'10 + Y'11 + Y'12 + Y'13 + + + start + 8: + Y'20 + Y'21 + Y'22 + Y'23 + + + start + 12: + Y'30 + Y'31 + Y'32 + Y'33 + + + start + 16: + Cr00 + + + start + 17: + Cb00 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YY + YY + + + + + + 1 + YY + YY + + + + C + + + + 2 + YY + YY + + + + + + 3 + YY + YY + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-yuv411p.xml b/Documentation/DocBook/v4l/pixfmt-yuv411p.xml new file mode 100644 index 00000000000..00e0960a986 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-yuv411p.xml @@ -0,0 +1,155 @@ + + + V4L2_PIX_FMT_YUV411P ('411P') + &manvol; + + + V4L2_PIX_FMT_YUV411P + Format with ¼ horizontal chroma resolution, +also known as YUV 4:1:1. Planar layout as opposed to +V4L2_PIX_FMT_Y41P + + + Description + + This format is not commonly used. This is a planar +format similar to the 4:2:2 planar format except with half as many +chroma. The three components are separated into three sub-images or +planes. The Y plane is first. The Y plane has one byte per pixel. The +Cb plane immediately follows the Y plane in memory. The Cb plane is +¼ the width of the Y plane (and of the image). Each Cb belongs +to 4 pixels all on the same row. For example, +Cb0 belongs to Y'00, +Y'01, Y'02 and +Y'03. Following the Cb plane is the Cr plane, +just like the Cb plane. + + If the Y plane has pad bytes after each row, then the Cr +and Cb planes have ¼ as many pad bytes after their rows. In +other words, four C x rows (including padding) is exactly as long as +one Y row (including padding). + + + <constant>V4L2_PIX_FMT_YUV411P</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Y'00 + Y'01 + Y'02 + Y'03 + + + start + 4: + Y'10 + Y'11 + Y'12 + Y'13 + + + start + 8: + Y'20 + Y'21 + Y'22 + Y'23 + + + start + 12: + Y'30 + Y'31 + Y'32 + Y'33 + + + start + 16: + Cb00 + + + start + 17: + Cb10 + + + start + 18: + Cb20 + + + start + 19: + Cb30 + + + start + 20: + Cr00 + + + start + 21: + Cr10 + + + start + 22: + Cr20 + + + start + 23: + Cr30 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YYC + YY + + + 1 + YYC + YY + + + 2 + YYC + YY + + + 3 + YYC + YY + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-yuv420.xml b/Documentation/DocBook/v4l/pixfmt-yuv420.xml new file mode 100644 index 00000000000..42d7de5e456 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-yuv420.xml @@ -0,0 +1,157 @@ + + + V4L2_PIX_FMT_YVU420 ('YV12'), V4L2_PIX_FMT_YUV420 ('YU12') + &manvol; + + + V4L2_PIX_FMT_YVU420 + V4L2_PIX_FMT_YUV420 + Planar formats with ½ horizontal and +vertical chroma resolution, also known as YUV 4:2:0 + + + Description + + These are planar formats, as opposed to a packed format. +The three components are separated into three sub- images or planes. +The Y plane is first. The Y plane has one byte per pixel. For +V4L2_PIX_FMT_YVU420, the Cr plane immediately +follows the Y plane in memory. The Cr plane is half the width and half +the height of the Y plane (and of the image). Each Cr belongs to four +pixels, a two-by-two square of the image. For example, +Cr0 belongs to Y'00, +Y'01, Y'10, and +Y'11. Following the Cr plane is the Cb plane, +just like the Cr plane. V4L2_PIX_FMT_YUV420 is +the same except the Cb plane comes first, then the Cr plane. + + If the Y plane has pad bytes after each row, then the Cr +and Cb planes have half as many pad bytes after their rows. In other +words, two Cx rows (including padding) is exactly as long as one Y row +(including padding). + + + <constant>V4L2_PIX_FMT_YVU420</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Y'00 + Y'01 + Y'02 + Y'03 + + + start + 4: + Y'10 + Y'11 + Y'12 + Y'13 + + + start + 8: + Y'20 + Y'21 + Y'22 + Y'23 + + + start + 12: + Y'30 + Y'31 + Y'32 + Y'33 + + + start + 16: + Cr00 + Cr01 + + + start + 18: + Cr10 + Cr11 + + + start + 20: + Cb00 + Cb01 + + + start + 22: + Cb10 + Cb11 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YY + YY + + + + C + C + + + 1 + YY + YY + + + + + + 2 + YY + YY + + + + C + C + + + 3 + YY + YY + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-yuv422p.xml b/Documentation/DocBook/v4l/pixfmt-yuv422p.xml new file mode 100644 index 00000000000..4348bd9f0d0 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-yuv422p.xml @@ -0,0 +1,161 @@ + + + V4L2_PIX_FMT_YUV422P ('422P') + &manvol; + + + V4L2_PIX_FMT_YUV422P + Format with ½ horizontal chroma resolution, +also known as YUV 4:2:2. Planar layout as opposed to +V4L2_PIX_FMT_YUYV + + + Description + + This format is not commonly used. This is a planar +version of the YUYV format. The three components are separated into +three sub-images or planes. The Y plane is first. The Y plane has one +byte per pixel. The Cb plane immediately follows the Y plane in +memory. The Cb plane is half the width of the Y plane (and of the +image). Each Cb belongs to two pixels. For example, +Cb0 belongs to Y'00, +Y'01. Following the Cb plane is the Cr plane, +just like the Cb plane. + + If the Y plane has pad bytes after each row, then the Cr +and Cb planes have half as many pad bytes after their rows. In other +words, two Cx rows (including padding) is exactly as long as one Y row +(including padding). + + + <constant>V4L2_PIX_FMT_YUV422P</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Y'00 + Y'01 + Y'02 + Y'03 + + + start + 4: + Y'10 + Y'11 + Y'12 + Y'13 + + + start + 8: + Y'20 + Y'21 + Y'22 + Y'23 + + + start + 12: + Y'30 + Y'31 + Y'32 + Y'33 + + + start + 16: + Cb00 + Cb01 + + + start + 18: + Cb10 + Cb11 + + + start + 20: + Cb20 + Cb21 + + + start + 22: + Cb30 + Cb31 + + + start + 24: + Cr00 + Cr01 + + + start + 26: + Cr10 + Cr11 + + + start + 28: + Cr20 + Cr21 + + + start + 30: + Cr30 + Cr31 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YCY + YCY + + + 1 + YCY + YCY + + + 2 + YCY + YCY + + + 3 + YCY + YCY + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-yuyv.xml b/Documentation/DocBook/v4l/pixfmt-yuyv.xml new file mode 100644 index 00000000000..bdb2ffacbbc --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-yuyv.xml @@ -0,0 +1,128 @@ + + + V4L2_PIX_FMT_YUYV ('YUYV') + &manvol; + + + V4L2_PIX_FMT_YUYV + Packed format with ½ horizontal chroma +resolution, also known as YUV 4:2:2 + + + Description + + In this format each four bytes is two pixels. Each four +bytes is two Y's, a Cb and a Cr. Each Y goes to one of the pixels, and +the Cb and Cr belong to both pixels. As you can see, the Cr and Cb +components have half the horizontal resolution of the Y component. +V4L2_PIX_FMT_YUYV is known in the Windows +environment as YUY2. + + + <constant>V4L2_PIX_FMT_YUYV</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Y'00 + Cb00 + Y'01 + Cr00 + Y'02 + Cb01 + Y'03 + Cr01 + + + start + 8: + Y'10 + Cb10 + Y'11 + Cr10 + Y'12 + Cb11 + Y'13 + Cr11 + + + start + 16: + Y'20 + Cb20 + Y'21 + Cr20 + Y'22 + Cb21 + Y'23 + Cr21 + + + start + 24: + Y'30 + Cb30 + Y'31 + Cr30 + Y'32 + Cb31 + Y'33 + Cr31 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YCY + YCY + + + 1 + YCY + YCY + + + 2 + YCY + YCY + + + 3 + YCY + YCY + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt-yvyu.xml b/Documentation/DocBook/v4l/pixfmt-yvyu.xml new file mode 100644 index 00000000000..40d17ae39dd --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-yvyu.xml @@ -0,0 +1,128 @@ + + + V4L2_PIX_FMT_YVYU ('YVYU') + &manvol; + + + V4L2_PIX_FMT_YVYU + Variation of +V4L2_PIX_FMT_YUYV with different order of samples +in memory + + + Description + + In this format each four bytes is two pixels. Each four +bytes is two Y's, a Cb and a Cr. Each Y goes to one of the pixels, and +the Cb and Cr belong to both pixels. As you can see, the Cr and Cb +components have half the horizontal resolution of the Y +component. + + + <constant>V4L2_PIX_FMT_YVYU</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Y'00 + Cr00 + Y'01 + Cb00 + Y'02 + Cr01 + Y'03 + Cb01 + + + start + 8: + Y'10 + Cr10 + Y'11 + Cb10 + Y'12 + Cr11 + Y'13 + Cb11 + + + start + 16: + Y'20 + Cr20 + Y'21 + Cb20 + Y'22 + Cr21 + Y'23 + Cb21 + + + start + 24: + Y'30 + Cr30 + Y'31 + Cb30 + Y'32 + Cr31 + Y'33 + Cb31 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YCY + YCY + + + 1 + YCY + YCY + + + 2 + YCY + YCY + + + 3 + YCY + YCY + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml new file mode 100644 index 00000000000..aaea55d4459 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt.xml @@ -0,0 +1,796 @@ + Image Formats + + The V4L2 API was primarily designed for devices exchanging +image data with applications. The +v4l2_pix_format structure defines the format +and layout of an image in memory. Image formats are negotiated with +the &VIDIOC-S-FMT; ioctl. (The explanations here focus on video +capturing and output, for overlay frame buffer formats see also +&VIDIOC-G-FBUF;.) + + + struct <structname>v4l2_pix_format</structname> + + &cs-str; + + + __u32 + width + Image width in pixels. + + + __u32 + height + Image height in pixels. + + + Applications set these fields to +request an image size, drivers return the closest possible values. In +case of planar formats the width and +height applies to the largest plane. To +avoid ambiguities drivers must return values rounded up to a multiple +of the scale factor of any smaller planes. For example when the image +format is YUV 4:2:0, width and +height must be multiples of two. + + + __u32 + pixelformat + The pixel format or type of compression, set by the +application. This is a little endian four character code. V4L2 defines +standard RGB formats in , YUV formats in , and reserved codes in + + + &v4l2-field; + field + Video images are typically interlaced. Applications +can request to capture or output only the top or bottom field, or both +fields interlaced or sequentially stored in one buffer or alternating +in separate buffers. Drivers return the actual field order selected. +For details see . + + + __u32 + bytesperline + Distance in bytes between the leftmost pixels in two +adjacent lines. + + + Both applications and drivers +can set this field to request padding bytes at the end of each line. +Drivers however may ignore the value requested by the application, +returning width times bytes per pixel or a +larger value required by the hardware. That implies applications can +just set this field to zero to get a reasonable +default.Video hardware may access padding bytes, +therefore they must reside in accessible memory. Consider cases where +padding bytes after the last line of an image cross a system page +boundary. Input devices may write padding bytes, the value is +undefined. Output devices ignore the contents of padding +bytes.When the image format is planar the +bytesperline value applies to the largest +plane and is divided by the same factor as the +width field for any smaller planes. For +example the Cb and Cr planes of a YUV 4:2:0 image have half as many +padding bytes following each line as the Y plane. To avoid ambiguities +drivers must return a bytesperline value +rounded up to a multiple of the scale factor. + + + __u32 + sizeimage + Size in bytes of the buffer to hold a complete image, +set by the driver. Usually this is +bytesperline times +height. When the image consists of variable +length compressed data this is the maximum number of bytes required to +hold an image. + + + &v4l2-colorspace; + colorspace + This information supplements the +pixelformat and must be set by the driver, +see . + + + __u32 + priv + Reserved for custom (driver defined) additional +information about formats. When not used drivers and applications must +set this field to zero. + + + +
+ +
+ Standard Image Formats + + In order to exchange images between drivers and +applications, it is necessary to have standard image data formats +which both sides will interpret the same way. V4L2 includes several +such formats, and this section is intended to be an unambiguous +specification of the standard image data formats in V4L2. + + V4L2 drivers are not limited to these formats, however. +Driver-specific formats are possible. In that case the application may +depend on a codec to convert images to one of the standard formats +when needed. But the data can still be stored and retrieved in the +proprietary format. For example, a device may support a proprietary +compressed format. Applications can still capture and save the data in +the compressed format, saving much disk space, and later use a codec +to convert the images to the X Windows screen format when the video is +to be displayed. + + Even so, ultimately, some standard formats are needed, so +the V4L2 specification would not be complete without well-defined +standard formats. + + The V4L2 standard formats are mainly uncompressed formats. The +pixels are always arranged in memory from left to right, and from top +to bottom. The first byte of data in the image buffer is always for +the leftmost pixel of the topmost row. Following that is the pixel +immediately to its right, and so on until the end of the top row of +pixels. Following the rightmost pixel of the row there may be zero or +more bytes of padding to guarantee that each row of pixel data has a +certain alignment. Following the pad bytes, if any, is data for the +leftmost pixel of the second row from the top, and so on. The last row +has just as many pad bytes after it as the other rows. + + In V4L2 each format has an identifier which looks like +PIX_FMT_XXX, defined in the videodev.h header file. These identifiers +represent four character codes +which are also listed below, however they are not the same as those +used in the Windows world. +
+ +
+ Colorspaces + + [intro] + + + + + + + Gamma Correction + + [to do] + E'R = f(R) + E'G = f(G) + E'B = f(B) + + + + Construction of luminance and color-difference +signals + + [to do] + E'Y = +CoeffR E'R ++ CoeffG E'G ++ CoeffB E'B + (E'R - E'Y) = E'R +- CoeffR E'R +- CoeffG E'G +- CoeffB E'B + (E'B - E'Y) = E'B +- CoeffR E'R +- CoeffG E'G +- CoeffB E'B + + + + Re-normalized color-difference signals + + The color-difference signals are scaled back to unity +range [-0.5;+0.5]: + KB = 0.5 / (1 - CoeffB) + KR = 0.5 / (1 - CoeffR) + PB = +KB (E'B - E'Y) = + 0.5 (CoeffR / CoeffB) E'R ++ 0.5 (CoeffG / CoeffB) E'G ++ 0.5 E'B + PR = +KR (E'R - E'Y) = + 0.5 E'R ++ 0.5 (CoeffG / CoeffR) E'G ++ 0.5 (CoeffB / CoeffR) E'B + + + + Quantization + + [to do] + Y' = (Lum. Levels - 1) · E'Y + Lum. Offset + CB = (Chrom. Levels - 1) +· PB + Chrom. Offset + CR = (Chrom. Levels - 1) +· PR + Chrom. Offset + Rounding to the nearest integer and clamping to the range +[0;255] finally yields the digital color components Y'CbCr +stored in YUV images. + + + + + + + ITU-R Rec. BT.601 color conversion + + Forward Transformation + + +int ER, EG, EB; /* gamma corrected RGB input [0;255] */ +int Y1, Cb, Cr; /* output [0;255] */ + +double r, g, b; /* temporaries */ +double y1, pb, pr; + +int +clamp (double x) +{ + int r = x; /* round to nearest */ + + if (r < 0) return 0; + else if (r > 255) return 255; + else return r; +} + +r = ER / 255.0; +g = EG / 255.0; +b = EB / 255.0; + +y1 = 0.299 * r + 0.587 * g + 0.114 * b; +pb = -0.169 * r - 0.331 * g + 0.5 * b; +pr = 0.5 * r - 0.419 * g - 0.081 * b; + +Y1 = clamp (219 * y1 + 16); +Cb = clamp (224 * pb + 128); +Cr = clamp (224 * pr + 128); + +/* or shorter */ + +y1 = 0.299 * ER + 0.587 * EG + 0.114 * EB; + +Y1 = clamp ( (219 / 255.0) * y1 + 16); +Cb = clamp (((224 / 255.0) / (2 - 2 * 0.114)) * (EB - y1) + 128); +Cr = clamp (((224 / 255.0) / (2 - 2 * 0.299)) * (ER - y1) + 128); + + + Inverse Transformation + + +int Y1, Cb, Cr; /* gamma pre-corrected input [0;255] */ +int ER, EG, EB; /* output [0;255] */ + +double r, g, b; /* temporaries */ +double y1, pb, pr; + +int +clamp (double x) +{ + int r = x; /* round to nearest */ + + if (r < 0) return 0; + else if (r > 255) return 255; + else return r; +} + +y1 = (255 / 219.0) * (Y1 - 16); +pb = (255 / 224.0) * (Cb - 128); +pr = (255 / 224.0) * (Cr - 128); + +r = 1.0 * y1 + 0 * pb + 1.402 * pr; +g = 1.0 * y1 - 0.344 * pb - 0.714 * pr; +b = 1.0 * y1 + 1.772 * pb + 0 * pr; + +ER = clamp (r * 255); /* [ok? one should prob. limit y1,pb,pr] */ +EG = clamp (g * 255); +EB = clamp (b * 255); + + + + + enum v4l2_colorspace + + + + + + + + + + + + + + + + + + Identifier + Value + Description + Chromaticities + The coordinates of the color primaries are +given in the CIE system (1931) + + White Point + Gamma Correction + Luminance E'Y + Quantization + + + Red + Green + Blue + Y' + Cb, Cr + + + + + V4L2_COLORSPACE_SMPTE170M + 1 + NTSC/PAL according to , + + x = 0.630, y = 0.340 + x = 0.310, y = 0.595 + x = 0.155, y = 0.070 + x = 0.3127, y = 0.3290, + Illuminant D65 + E' = 4.5 I for I ≤0.018, +1.099 I0.45 - 0.099 for 0.018 < I + 0.299 E'R ++ 0.587 E'G ++ 0.114 E'B + 219 E'Y + 16 + 224 PB,R + 128 + + + V4L2_COLORSPACE_SMPTE240M + 2 + 1125-Line (US) HDTV, see + x = 0.630, y = 0.340 + x = 0.310, y = 0.595 + x = 0.155, y = 0.070 + x = 0.3127, y = 0.3290, + Illuminant D65 + E' = 4 I for I ≤0.0228, +1.1115 I0.45 - 0.1115 for 0.0228 < I + 0.212 E'R ++ 0.701 E'G ++ 0.087 E'B + 219 E'Y + 16 + 224 PB,R + 128 + + + V4L2_COLORSPACE_REC709 + 3 + HDTV and modern devices, see + x = 0.640, y = 0.330 + x = 0.300, y = 0.600 + x = 0.150, y = 0.060 + x = 0.3127, y = 0.3290, + Illuminant D65 + E' = 4.5 I for I ≤0.018, +1.099 I0.45 - 0.099 for 0.018 < I + 0.2125 E'R ++ 0.7154 E'G ++ 0.0721 E'B + 219 E'Y + 16 + 224 PB,R + 128 + + + V4L2_COLORSPACE_BT878 + 4 + Broken Bt878 extents + The ubiquitous Bt878 video capture chip +quantizes E'Y to 238 levels, yielding a range +of Y' = 16 … 253, unlike Rec. 601 Y' = 16 … +235. This is not a typo in the Bt878 documentation, it has been +implemented in silicon. The chroma extents are unclear. + , + ? + ? + ? + ? + ? + 0.299 E'R ++ 0.587 E'G ++ 0.114 E'B + 237 E'Y + 16 + 224 PB,R + 128 (probably) + + + V4L2_COLORSPACE_470_SYSTEM_M + 5 + M/NTSC + No identifier exists for M/PAL which uses +the chromaticities of M/NTSC, the remaining parameters are equal to B and +G/PAL. + according to , + x = 0.67, y = 0.33 + x = 0.21, y = 0.71 + x = 0.14, y = 0.08 + x = 0.310, y = 0.316, Illuminant C + ? + 0.299 E'R ++ 0.587 E'G ++ 0.114 E'B + 219 E'Y + 16 + 224 PB,R + 128 + + + V4L2_COLORSPACE_470_SYSTEM_BG + 6 + 625-line PAL and SECAM systems according to , + x = 0.64, y = 0.33 + x = 0.29, y = 0.60 + x = 0.15, y = 0.06 + x = 0.313, y = 0.329, +Illuminant D65 + ? + 0.299 E'R ++ 0.587 E'G ++ 0.114 E'B + 219 E'Y + 16 + 224 PB,R + 128 + + + V4L2_COLORSPACE_JPEG + 7 + JPEG Y'CbCr, see , + ? + ? + ? + ? + ? + 0.299 E'R ++ 0.587 E'G ++ 0.114 E'B + 256 E'Y + 16 + Note JFIF quantizes +Y'PBPR in range [0;+1] and +[-0.5;+0.5] to 257 levels, however Y'CbCr signals +are still clamped to [0;255]. + + 256 PB,R + 128 + + + V4L2_COLORSPACE_SRGB + 8 + [?] + x = 0.640, y = 0.330 + x = 0.300, y = 0.600 + x = 0.150, y = 0.060 + x = 0.3127, y = 0.3290, + Illuminant D65 + E' = 4.5 I for I ≤0.018, +1.099 I0.45 - 0.099 for 0.018 < I + n/a + + + +
+
+ +
+ Indexed Format + + In this format each pixel is represented by an 8 bit index +into a 256 entry ARGB palette. It is intended for Video Output Overlays only. There are no ioctls to +access the palette, this must be done with ioctls of the Linux framebuffer API. + + + Indexed Image Format + + + + + + + + + + + + + + + + + + + + + Identifier + Code +   + Byte 0 + + +   +   + Bit + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 + + + + + V4L2_PIX_FMT_PAL8 + 'PAL8' + + i7 + i6 + i5 + i4 + i3 + i2 + i1 + i0 + + + +
+
+ +
+ RGB Formats + + &sub-packed-rgb; + &sub-sbggr8; + &sub-sgbrg8; + &sub-sgrbg8; + &sub-sbggr16; +
+ +
+ YUV Formats + + YUV is the format native to TV broadcast and composite video +signals. It separates the brightness information (Y) from the color +information (U and V or Cb and Cr). The color information consists of +red and blue color difference signals, this way +the green component can be reconstructed by subtracting from the +brightness component. See for conversion +examples. YUV was chosen because early television would only transmit +brightness information. To add color in a way compatible with existing +receivers a new signal carrier was added to transmit the color +difference signals. Secondary in the YUV format the U and V components +usually have lower resolution than the Y component. This is an analog +video compression technique taking advantage of a property of the +human visual system, being more sensitive to brightness +information. + + &sub-packed-yuv; + &sub-grey; + &sub-y16; + &sub-yuyv; + &sub-uyvy; + &sub-yvyu; + &sub-vyuy; + &sub-y41p; + &sub-yuv420; + &sub-yuv410; + &sub-yuv422p; + &sub-yuv411p; + &sub-nv12; + &sub-nv16; +
+ +
+ Compressed Formats + + + Compressed Image Formats + + &cs-def; + + + Identifier + Code + Details + + + + + V4L2_PIX_FMT_JPEG + 'JPEG' + TBD. See also &VIDIOC-G-JPEGCOMP;, + &VIDIOC-S-JPEGCOMP;. + + + V4L2_PIX_FMT_MPEG + 'MPEG' + MPEG stream. The actual format is determined by +extended control V4L2_CID_MPEG_STREAM_TYPE, see +. + + + +
+
+ +
+ Reserved Format Identifiers + + These formats are not defined by this specification, they +are just listed for reference and to avoid naming conflicts. If you +want to register your own format, send an e-mail to the linux-media mailing +list &v4l-ml; for inclusion in the videodev2.h +file. If you want to share your format with other developers add a +link to your documentation and send a copy to the linux-media mailing list +for inclusion in this section. If you think your format should be listed +in a standard format section please make a proposal on the linux-media mailing +list. + + + Reserved Image Formats + + &cs-def; + + + Identifier + Code + Details + + + + + V4L2_PIX_FMT_DV + 'dvsd' + unknown + + + V4L2_PIX_FMT_ET61X251 + 'E625' + Compressed format of the ET61X251 driver. + + + V4L2_PIX_FMT_HI240 + 'HI24' + 8 bit RGB format used by the BTTV driver. + + + V4L2_PIX_FMT_HM12 + 'HM12' + YUV 4:2:0 format used by the +IVTV driver, +http://www.ivtvdriver.org/The format is documented in the +kernel sources in the file Documentation/video4linux/cx2341x/README.hm12 + + + + V4L2_PIX_FMT_SPCA501 + 'S501' + YUYV per line used by the gspca driver. + + + V4L2_PIX_FMT_SPCA505 + 'S505' + YYUV per line used by the gspca driver. + + + V4L2_PIX_FMT_SPCA508 + 'S508' + YUVY per line used by the gspca driver. + + + V4L2_PIX_FMT_SPCA561 + 'S561' + Compressed GBRG Bayer format used by the gspca driver. + + + V4L2_PIX_FMT_SGRBG10 + 'DA10' + 10 bit raw Bayer, expanded to 16 bits. + + + V4L2_PIX_FMT_SGRBG10DPCM8 + 'DB10' + 10 bit raw Bayer DPCM compressed to 8 bits. + + + V4L2_PIX_FMT_PAC207 + 'P207' + Compressed BGGR Bayer format used by the gspca driver. + + + V4L2_PIX_FMT_MR97310A + 'M310' + Compressed BGGR Bayer format used by the gspca driver. + + + V4L2_PIX_FMT_OV511 + 'O511' + OV511 JPEG format used by the gspca driver. + + + V4L2_PIX_FMT_OV518 + 'O518' + OV518 JPEG format used by the gspca driver. + + + V4L2_PIX_FMT_PJPG + 'PJPG' + Pixart 73xx JPEG format used by the gspca driver. + + + V4L2_PIX_FMT_SQ905C + '905C' + Compressed RGGB bayer format used by the gspca driver. + + + V4L2_PIX_FMT_MJPEG + 'MJPG' + Compressed format used by the Zoran driver + + + V4L2_PIX_FMT_PWC1 + 'PWC1' + Compressed format of the PWC driver. + + + V4L2_PIX_FMT_PWC2 + 'PWC2' + Compressed format of the PWC driver. + + + V4L2_PIX_FMT_SN9C10X + 'S910' + Compressed format of the SN9C102 driver. + + + V4L2_PIX_FMT_SN9C20X_I420 + 'S920' + YUV 4:2:0 format of the gspca sn9c20x driver. + + + V4L2_PIX_FMT_WNVA + 'WNVA' + Used by the Winnov Videum driver, +http://www.thedirks.org/winnov/ + + + V4L2_PIX_FMT_YYUV + 'YYUV' + unknown + + + +
+
+ + diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/v4l/remote_controllers.xml new file mode 100644 index 00000000000..eb669537a64 --- /dev/null +++ b/Documentation/DocBook/v4l/remote_controllers.xml @@ -0,0 +1,170 @@ +Remote Controllers +
+Introduction + +Currently, most analog and digital devices have a Infrared input for remote controllers. Each manufacturer has their own type of control. It is not rare that the same manufacturer to ship different types of controls, depending on the device. +Unfortunately, during several years, there weren't any effort to uniform the IR keycodes under different boards. This resulted that the same IR keyname to be mapped completely different on different IR's. Due to that, V4L2 API now specifies a standard for mapping Media keys on IR. +This standard should be used by both V4L/DVB drivers and userspace applications +The modules register the remote as keyboard within the linux input layer. This means that the IR key strokes will look like normal keyboard key strokes (if CONFIG_INPUT_KEYBOARD is enabled). Using the event devices (CONFIG_INPUT_EVDEV) it is possible for applications to access the remote via /dev/input/event devices. + + +IR default keymapping + +&cs-str; + + +Key code +Meaning +Key examples on IR + + +Numeric keys + +KEY_0Keyboard digit 00 +KEY_1Keyboard digit 11 +KEY_2Keyboard digit 22 +KEY_3Keyboard digit 33 +KEY_4Keyboard digit 44 +KEY_5Keyboard digit 55 +KEY_6Keyboard digit 66 +KEY_7Keyboard digit 77 +KEY_8Keyboard digit 88 +KEY_9Keyboard digit 99 + +Movie play control + +KEY_FORWARDInstantly advance in time>> / FORWARD +KEY_BACKInstantly go back in time<<< / BACK +KEY_FASTFORWARDPlay movie faster>>> / FORWARD +KEY_REWINDPlay movie backREWIND / BACKWARD +KEY_NEXTSelect next chapter / sub-chapter / intervalNEXT / SKIP +KEY_PREVIOUSSelect previous chapter / sub-chapter / interval<< / PREV / PREVIOUS +KEY_AGAINRepeat the video or a video intervalREPEAT / LOOP / RECALL +KEY_PAUSEPause sroweamPAUSE / FREEZE +KEY_PLAYPlay movie at the normal timeshiftNORMAL TIMESHIFT / LIVE / > +KEY_PLAYPAUSEAlternate between play and pausePLAY / PAUSE +KEY_STOPStop sroweamSTOP +KEY_RECORDStart/stop recording sroweamCAPTURE / REC / RECORD/PAUSE +KEY_CAMERATake a picture of the imageCAMERA ICON / CAPTURE / SNAPSHOT +KEY_SHUFFLEEnable shuffle modeSHUFFLE +KEY_TIMEActivate time shift modeTIME SHIFT +KEY_TITLEAllow changing the chapterCHAPTER +KEY_SUBTITLEAllow changing the subtitleSUBTITLE + +Image control + +KEY_BRIGHTNESSDOWNDecrease BrightnessBRIGHTNESS DECREASE +KEY_BRIGHTNESSUPIncrease BrightnessBRIGHTNESS INCREASE + +KEY_ANGLESwitch video camera angle (on videos with more than one angle stored)ANGLE / SWAP +KEY_EPGOpen the Elecrowonic Play Guide (EPG)EPG / GUIDE +KEY_TEXTActivate/change closed caption modeCLOSED CAPTION/TELETEXT / DVD TEXT / TELETEXT / TTX + +Audio control + +KEY_AUDIOChange audio sourceAUDIO SOURCE / AUDIO / MUSIC +KEY_MUTEMute/unmute audioMUTE / DEMUTE / UNMUTE +KEY_VOLUMEDOWNDecrease volumeVOLUME- / VOLUME DOWN +KEY_VOLUMEUPIncrease volumeVOLUME+ / VOLUME UP +KEY_MODEChange sound modeMONO/STEREO +KEY_LANGUAGESelect Language1ST / 2ND LANGUAGE / DVD LANG / MTS/SAP / MTS SEL + +Channel control + +KEY_CHANNELGo to the next favorite channelALT / CHANNEL / CH SURFING / SURF / FAV +KEY_CHANNELDOWNDecrease channel sequenciallyCHANNEL - / CHANNEL DOWN / DOWN +KEY_CHANNELUPIncrease channel sequenciallyCHANNEL + / CHANNEL UP / UP +KEY_DIGITSUse more than one digit for channelPLUS / 100/ 1xx / xxx / -/-- / Single Double Triple Digit +KEY_SEARCHStart channel autoscanSCAN / AUTOSCAN + +Colored keys + +KEY_BLUEIR Blue keyBLUE +KEY_GREENIR Green KeyGREEN +KEY_REDIR Red keyRED +KEY_YELLOWIR Yellow key YELLOW + +Media selection + +KEY_CDChange input source to Compact DiscCD +KEY_DVDChange input to DVDDVD / DVD MENU +KEY_EJECTCLOSECDOpen/close the CD/DVD player-> ) / CLOSE / OPEN + +KEY_MEDIATurn on/off Media applicationPC/TV / TURN ON/OFF APP +KEY_PCSelects from TV to PCPC +KEY_RADIOPut into AM/FM radio modeRADIO / TV/FM / TV/RADIO / FM / FM/RADIO +KEY_TVSelect tv modeTV / LIVE TV +KEY_TV2Select Cable modeAIR/CBL +KEY_VCRSelect VCR modeVCR MODE / DTR +KEY_VIDEOAlternate between input modesSOURCE / SELECT / DISPLAY / SWITCH INPUTS / VIDEO + +Power control + +KEY_POWERTurn on/off computerSYSTEM POWER / COMPUTER POWER +KEY_POWER2Turn on/off applicationTV ON/OFF / POWER +KEY_SLEEPActivate sleep timerSLEEP / SLEEP TIMER +KEY_SUSPENDPut computer into suspend modeSTANDBY / SUSPEND + +Window control + +KEY_CLEARStop sroweam and return to default input video/audioCLEAR / RESET / BOSS KEY +KEY_CYCLEWINDOWSMinimize windows and move to the next oneALT-TAB / MINIMIZE / DESKTOP +KEY_FAVORITESOpen the favorites sroweam windowTV WALL / Favorites +KEY_MENUCall application menu2ND CONTROLS (USA: MENU) / DVD/MENU / SHOW/HIDE CTRL +KEY_NEWOpen/Close Picture in PicturePIP +KEY_OKSend a confirmation code to applicationOK / ENTER / RETURN +KEY_SCREENSelect screen aspect ratio4:3 16:9 SELECT +KEY_ZOOMPut device into zoom/full screen modeZOOM / FULL SCREEN / ZOOM+ / HIDE PANNEL / SWITCH + +Navigation keys + +KEY_ESCCancel current operationCANCEL / BACK +KEY_HELPOpen a Help windowHELP +KEY_HOMEPAGENavigate to HomepageHOME +KEY_INFOOpen On Screen DisplayDISPLAY INFORMATION / OSD +KEY_WWWOpen the default browserWEB +KEY_UPUp keyUP +KEY_DOWNDown keyDOWN +KEY_LEFTLeft keyLEFT +KEY_RIGHTRight keyRIGHT + +Miscelaneous keys + +KEY_DOTReturn a dot. +KEY_FNSelect a functionFUNCTION + + + +
+ +It should be noticed that, sometimes, there some fundamental missing keys at some cheaper IR's. Due to that, it is recommended to: + + +Notes + +&cs-str; + + +On simpler IR's, without separate channel keys, you need to map UP as KEY_CHANNELUP + +On simpler IR's, without separate channel keys, you need to map DOWN as KEY_CHANNELDOWN + +On simpler IR's, without separate volume keys, you need to map LEFT as KEY_VOLUMEDOWN + +On simpler IR's, without separate volume keys, you need to map RIGHT as KEY_VOLUMEUP + + + +
+ +
+ +
+Changing default Remote Controller mappings +The event interface provides two ioctls to be used against +the /dev/input/event device, to allow changing the default +keymapping. + +This program demonstrates how to replace the keymap tables. +&sub-keytable-c; +
diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml new file mode 100644 index 00000000000..97801725b97 --- /dev/null +++ b/Documentation/DocBook/v4l/v4l2.xml @@ -0,0 +1,481 @@ + + + + Michael + Schimek + H + +
+ mschimek@gmx.at +
+ + + + + Bill + Dirks + + Original author of the V4L2 API and +documentation. + + + + Hans + Verkuil + Designed and documented the VIDIOC_LOG_STATUS ioctl, +the extended control ioctls and major parts of the sliced VBI +API. + +
+ hverkuil@xs4all.nl +
+ + + + + Martin + Rubli + + Designed and documented the VIDIOC_ENUM_FRAMESIZES +and VIDIOC_ENUM_FRAMEINTERVALS ioctls. + + + + Andy + Walls + Documented the fielded V4L2_MPEG_STREAM_VBI_FMT_IVTV +MPEG stream embedded, sliced VBI data format in this specification. + + +
+ awalls@radix.net +
+ + + + + Mauro + Carvalho Chehab + Documented libv4l, designed and added v4l2grab example, +Remote Controller chapter. + +
+ mchehab@redhat.com +
+ + + + + + 1999 + 2000 + 2001 + 2002 + 2003 + 2004 + 2005 + 2006 + 2007 + 2008 + 2009 + Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin +Rubli, Andy Walls, Mauro Carvalho Chehab + + + Except when explicitly stated as GPL, programming examples within + this part can be used and distributed without restrictions. + + + + + + + 2.6.32 + 2009-08-31 + mcc + Now, revisions will match the kernel version where +the V4L2 API changes will be used by the Linux Kernel. +Also added Remote Controller chapter. + + + + 0.29 + 2009-08-26 + ev + Added documentation for string controls and for FM Transmitter controls. + + + + 0.28 + 2009-08-26 + gl + Added V4L2_CID_BAND_STOP_FILTER documentation. + + + + 0.27 + 2009-08-15 + mcc + Added libv4l and Remote Controller documentation; +added v4l2grab and keytable application examples. + + + + 0.26 + 2009-07-23 + hv + Finalized the RDS capture API. Added modulator and RDS encoder +capabilities. Added support for string controls. + + + + 0.25 + 2009-01-18 + hv + Added pixel formats VYUY, NV16 and NV61, and changed +the debug ioctls VIDIOC_DBG_G/S_REGISTER and VIDIOC_DBG_G_CHIP_IDENT. +Added camera controls V4L2_CID_ZOOM_ABSOLUTE, V4L2_CID_ZOOM_RELATIVE, +V4L2_CID_ZOOM_CONTINUOUS and V4L2_CID_PRIVACY. + + + + 0.24 + 2008-03-04 + mhs + Added pixel formats Y16 and SBGGR16, new controls +and a camera controls class. Removed VIDIOC_G/S_MPEGCOMP. + + + + 0.23 + 2007-08-30 + mhs + Fixed a typo in VIDIOC_DBG_G/S_REGISTER. +Clarified the byte order of packed pixel formats. + + + + 0.22 + 2007-08-29 + mhs + Added the Video Output Overlay interface, new MPEG +controls, V4L2_FIELD_INTERLACED_TB and V4L2_FIELD_INTERLACED_BT, +VIDIOC_DBG_G/S_REGISTER, VIDIOC_(TRY_)ENCODER_CMD, +VIDIOC_G_CHIP_IDENT, VIDIOC_G_ENC_INDEX, new pixel formats. +Clarifications in the cropping chapter, about RGB pixel formats, the +mmap(), poll(), select(), read() and write() functions. Typographical +fixes. + + + + 0.21 + 2006-12-19 + mhs + Fixed a link in the VIDIOC_G_EXT_CTRLS section. + + + + 0.20 + 2006-11-24 + mhs + Clarified the purpose of the audioset field in +struct v4l2_input and v4l2_output. + + + + 0.19 + 2006-10-19 + mhs + Documented V4L2_PIX_FMT_RGB444. + + + + 0.18 + 2006-10-18 + mhs + Added the description of extended controls by Hans +Verkuil. Linked V4L2_PIX_FMT_MPEG to V4L2_CID_MPEG_STREAM_TYPE. + + + + 0.17 + 2006-10-12 + mhs + Corrected V4L2_PIX_FMT_HM12 description. + + + + 0.16 + 2006-10-08 + mhs + VIDIOC_ENUM_FRAMESIZES and +VIDIOC_ENUM_FRAMEINTERVALS are now part of the API. + + + + 0.15 + 2006-09-23 + mhs + Cleaned up the bibliography, added BT.653 and +BT.1119. capture.c/start_capturing() for user pointer I/O did not +initialize the buffer index. Documented the V4L MPEG and MJPEG +VID_TYPEs and V4L2_PIX_FMT_SBGGR8. Updated the list of reserved pixel +formats. See the history chapter for API changes. + + + + 0.14 + 2006-09-14 + mr + Added VIDIOC_ENUM_FRAMESIZES and +VIDIOC_ENUM_FRAMEINTERVALS proposal for frame format enumeration of +digital devices. + + + + 0.13 + 2006-04-07 + mhs + Corrected the description of struct v4l2_window +clips. New V4L2_STD_ and V4L2_TUNER_MODE_LANG1_LANG2 +defines. + + + + 0.12 + 2006-02-03 + mhs + Corrected the description of struct +v4l2_captureparm and v4l2_outputparm. + + + + 0.11 + 2006-01-27 + mhs + Improved the description of struct +v4l2_tuner. + + + + 0.10 + 2006-01-10 + mhs + VIDIOC_G_INPUT and VIDIOC_S_PARM +clarifications. + + + + 0.9 + 2005-11-27 + mhs + Improved the 525 line numbering diagram. Hans +Verkuil and I rewrote the sliced VBI section. He also contributed a +VIDIOC_LOG_STATUS page. Fixed VIDIOC_S_STD call in the video standard +selection example. Various updates. + + + + 0.8 + 2004-10-04 + mhs + Somehow a piece of junk slipped into the capture +example, removed. + + + + 0.7 + 2004-09-19 + mhs + Fixed video standard selection, control +enumeration, downscaling and aspect example. Added read and user +pointer i/o to video capture example. + + + + 0.6 + 2004-08-01 + mhs + v4l2_buffer changes, added video capture example, +various corrections. + + + + 0.5 + 2003-11-05 + mhs + Pixel format erratum. + + + + 0.4 + 2003-09-17 + mhs + Corrected source and Makefile to generate a PDF. +SGML fixes. Added latest API changes. Closed gaps in the history +chapter. + + + + 0.3 + 2003-02-05 + mhs + Another draft, more corrections. + + + + 0.2 + 2003-01-15 + mhs + Second draft, with corrections pointed out by Gerd +Knorr. + + + + 0.1 + 2002-12-01 + mhs + First draft, based on documentation by Bill Dirks +and discussions on the V4L mailing list. + + + + +Video for Linux Two API Specification + Revision 2.6.32 + + + &sub-common; + + + + &sub-pixfmt; + + + + &sub-io; + + + + Interfaces + +
&sub-dev-capture;
+
&sub-dev-overlay;
+
&sub-dev-output;
+
&sub-dev-osd;
+
&sub-dev-codec;
+
&sub-dev-effect;
+
&sub-dev-raw-vbi;
+
&sub-dev-sliced-vbi;
+
&sub-dev-teletext;
+
&sub-dev-radio;
+
&sub-dev-rds;
+ + + + &sub-driver; + + + + &sub-libv4l; + + + + &sub-compat; + + + + Function Reference + + + + + &sub-close; + &sub-ioctl; + + &sub-cropcap; + &sub-dbg-g-chip-ident; + &sub-dbg-g-register; + &sub-encoder-cmd; + &sub-enumaudio; + &sub-enumaudioout; + &sub-enum-fmt; + &sub-enum-framesizes; + &sub-enum-frameintervals; + &sub-enuminput; + &sub-enumoutput; + &sub-enumstd; + &sub-g-audio; + &sub-g-audioout; + &sub-g-crop; + &sub-g-ctrl; + &sub-g-enc-index; + &sub-g-ext-ctrls; + &sub-g-fbuf; + &sub-g-fmt; + &sub-g-frequency; + &sub-g-input; + &sub-g-jpegcomp; + &sub-g-modulator; + &sub-g-output; + &sub-g-parm; + &sub-g-priority; + &sub-g-sliced-vbi-cap; + &sub-g-std; + &sub-g-tuner; + &sub-log-status; + &sub-overlay; + &sub-qbuf; + &sub-querybuf; + &sub-querycap; + &sub-queryctrl; + &sub-querystd; + &sub-reqbufs; + &sub-s-hw-freq-seek; + &sub-streamon; + + &sub-mmap; + &sub-munmap; + &sub-open; + &sub-poll; + &sub-read; + &sub-select; + &sub-write; + + + + + Video For Linux Two Header File + &sub-videodev2-h; + + + + Video Capture Example + &sub-capture-c; + + + + Video Grabber example using libv4l + This program demonstrates how to grab V4L2 images in ppm format by +using libv4l handlers. The advantage is that this grabber can potentially work +with any V4L2 driver. + &sub-v4l2grab-c; + + + &sub-media-indices; + + &sub-biblio; + diff --git a/Documentation/DocBook/v4l/v4l2grab.c.xml b/Documentation/DocBook/v4l/v4l2grab.c.xml new file mode 100644 index 00000000000..bed12e40be2 --- /dev/null +++ b/Documentation/DocBook/v4l/v4l2grab.c.xml @@ -0,0 +1,164 @@ + +/* V4L2 video picture grabber + Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@infradead.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <fcntl.h> +#include <errno.h> +#include <sys/ioctl.h> +#include <sys/types.h> +#include <sys/time.h> +#include <sys/mman.h> +#include <linux/videodev2.h> +#include "../libv4l/include/libv4l2.h" + +#define CLEAR(x) memset(&(x), 0, sizeof(x)) + +struct buffer { + void *start; + size_t length; +}; + +static void xioctl(int fh, int request, void *arg) +{ + int r; + + do { + r = v4l2_ioctl(fh, request, arg); + } while (r == -1 && ((errno == EINTR) || (errno == EAGAIN))); + + if (r == -1) { + fprintf(stderr, "error %d, %s\n", errno, strerror(errno)); + exit(EXIT_FAILURE); + } +} + +int main(int argc, char **argv) +{ + struct v4l2_format fmt; + struct v4l2_buffer buf; + struct v4l2_requestbuffers req; + enum v4l2_buf_type type; + fd_set fds; + struct timeval tv; + int r, fd = -1; + unsigned int i, n_buffers; + char *dev_name = "/dev/video0"; + char out_name[256]; + FILE *fout; + struct buffer *buffers; + + fd = v4l2_open(dev_name, O_RDWR | O_NONBLOCK, 0); + if (fd < 0) { + perror("Cannot open device"); + exit(EXIT_FAILURE); + } + + CLEAR(fmt); + fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + fmt.fmt.pix.width = 640; + fmt.fmt.pix.height = 480; + fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_RGB24; + fmt.fmt.pix.field = V4L2_FIELD_INTERLACED; + xioctl(fd, VIDIOC_S_FMT, &fmt); + if (fmt.fmt.pix.pixelformat != V4L2_PIX_FMT_RGB24) { + printf("Libv4l didn't accept RGB24 format. Can't proceed.\n"); + exit(EXIT_FAILURE); + } + if ((fmt.fmt.pix.width != 640) || (fmt.fmt.pix.height != 480)) + printf("Warning: driver is sending image at %dx%d\n", + fmt.fmt.pix.width, fmt.fmt.pix.height); + + CLEAR(req); + req.count = 2; + req.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + req.memory = V4L2_MEMORY_MMAP; + xioctl(fd, VIDIOC_REQBUFS, &req); + + buffers = calloc(req.count, sizeof(*buffers)); + for (n_buffers = 0; n_buffers < req.count; ++n_buffers) { + CLEAR(buf); + + buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf.memory = V4L2_MEMORY_MMAP; + buf.index = n_buffers; + + xioctl(fd, VIDIOC_QUERYBUF, &buf); + + buffers[n_buffers].length = buf.length; + buffers[n_buffers].start = v4l2_mmap(NULL, buf.length, + PROT_READ | PROT_WRITE, MAP_SHARED, + fd, buf.m.offset); + + if (MAP_FAILED == buffers[n_buffers].start) { + perror("mmap"); + exit(EXIT_FAILURE); + } + } + + for (i = 0; i < n_buffers; ++i) { + CLEAR(buf); + buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf.memory = V4L2_MEMORY_MMAP; + buf.index = i; + xioctl(fd, VIDIOC_QBUF, &buf); + } + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + xioctl(fd, VIDIOC_STREAMON, &type); + for (i = 0; i < 20; i++) { + do { + FD_ZERO(&fds); + FD_SET(fd, &fds); + + /* Timeout. */ + tv.tv_sec = 2; + tv.tv_usec = 0; + + r = select(fd + 1, &fds, NULL, NULL, &tv); + } while ((r == -1 && (errno = EINTR))); + if (r == -1) { + perror("select"); + return errno; + } + + CLEAR(buf); + buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf.memory = V4L2_MEMORY_MMAP; + xioctl(fd, VIDIOC_DQBUF, &buf); + + sprintf(out_name, "out%03d.ppm", i); + fout = fopen(out_name, "w"); + if (!fout) { + perror("Cannot open image"); + exit(EXIT_FAILURE); + } + fprintf(fout, "P6\n%d %d 255\n", + fmt.fmt.pix.width, fmt.fmt.pix.height); + fwrite(buffers[buf.index].start, buf.bytesused, 1, fout); + fclose(fout); + + xioctl(fd, VIDIOC_QBUF, &buf); + } + + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + xioctl(fd, VIDIOC_STREAMOFF, &type); + for (i = 0; i < n_buffers; ++i) + v4l2_munmap(buffers[i].start, buffers[i].length); + v4l2_close(fd); + + return 0; +} + diff --git a/Documentation/DocBook/v4l/vbi_525.gif b/Documentation/DocBook/v4l/vbi_525.gif new file mode 100644 index 00000000000..5580b690d50 Binary files /dev/null and b/Documentation/DocBook/v4l/vbi_525.gif differ diff --git a/Documentation/DocBook/v4l/vbi_525.pdf b/Documentation/DocBook/v4l/vbi_525.pdf new file mode 100644 index 00000000000..9e72c25b208 Binary files /dev/null and b/Documentation/DocBook/v4l/vbi_525.pdf differ diff --git a/Documentation/DocBook/v4l/vbi_625.gif b/Documentation/DocBook/v4l/vbi_625.gif new file mode 100644 index 00000000000..34e3251983c Binary files /dev/null and b/Documentation/DocBook/v4l/vbi_625.gif differ diff --git a/Documentation/DocBook/v4l/vbi_625.pdf b/Documentation/DocBook/v4l/vbi_625.pdf new file mode 100644 index 00000000000..765235e33a4 Binary files /dev/null and b/Documentation/DocBook/v4l/vbi_625.pdf differ diff --git a/Documentation/DocBook/v4l/vbi_hsync.gif b/Documentation/DocBook/v4l/vbi_hsync.gif new file mode 100644 index 00000000000..b02434d3b35 Binary files /dev/null and b/Documentation/DocBook/v4l/vbi_hsync.gif differ diff --git a/Documentation/DocBook/v4l/vbi_hsync.pdf b/Documentation/DocBook/v4l/vbi_hsync.pdf new file mode 100644 index 00000000000..200b668189b Binary files /dev/null and b/Documentation/DocBook/v4l/vbi_hsync.pdf differ diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml new file mode 100644 index 00000000000..6a8e1394069 --- /dev/null +++ b/Documentation/DocBook/v4l/videodev2.h.xml @@ -0,0 +1,1639 @@ + +/* + * Video for Linux Two header file + * + * Copyright (C) 1999-2007 the contributors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Alternatively you can redistribute this file under the terms of the + * BSD license as stated below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. The names of its contributors may not be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Header file for v4l or V4L2 drivers and applications + * with public API. + * All kernel-specific stuff were moved to media/v4l2-dev.h, so + * no #if __KERNEL tests are allowed here + * + * See http://linuxtv.org for more info + * + * Author: Bill Dirks <bill@thedirks.org> + * Justin Schoeman + * Hans Verkuil <hverkuil@xs4all.nl> + * et al. + */ +#ifndef __LINUX_VIDEODEV2_H +#define __LINUX_VIDEODEV2_H + +#ifdef __KERNEL__ +#include <linux/time.h> /* need struct timeval */ +#else +#include <sys/time.h> +#endif +#include <linux/compiler.h> +#include <linux/ioctl.h> +#include <linux/types.h> + +/* + * Common stuff for both V4L1 and V4L2 + * Moved from videodev.h + */ +#define VIDEO_MAX_FRAME 32 + +#ifndef __KERNEL__ + +/* These defines are V4L1 specific and should not be used with the V4L2 API! + They will be removed from this header in the future. */ + +#define VID_TYPE_CAPTURE 1 /* Can capture */ +#define VID_TYPE_TUNER 2 /* Can tune */ +#define VID_TYPE_TELETEXT 4 /* Does teletext */ +#define VID_TYPE_OVERLAY 8 /* Overlay onto frame buffer */ +#define VID_TYPE_CHROMAKEY 16 /* Overlay by chromakey */ +#define VID_TYPE_CLIPPING 32 /* Can clip */ +#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */ +#define VID_TYPE_SCALES 128 /* Scalable */ +#define VID_TYPE_MONOCHROME 256 /* Monochrome only */ +#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */ +#define VID_TYPE_MPEG_DECODER 1024 /* Can decode MPEG streams */ +#define VID_TYPE_MPEG_ENCODER 2048 /* Can encode MPEG streams */ +#define VID_TYPE_MJPEG_DECODER 4096 /* Can decode MJPEG streams */ +#define VID_TYPE_MJPEG_ENCODER 8192 /* Can encode MJPEG streams */ +#endif + +/* + * M I S C E L L A N E O U S + */ + +/* Four-character-code (FOURCC) */ +#define v4l2_fourcc(a, b, c, d)\ + ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24)) + +/* + * E N U M S + */ +enum v4l2_field { + V4L2_FIELD_ANY = 0, /* driver can choose from none, + top, bottom, interlaced + depending on whatever it thinks + is approximate ... */ + V4L2_FIELD_NONE = 1, /* this device has no fields ... */ + V4L2_FIELD_TOP = 2, /* top field only */ + V4L2_FIELD_BOTTOM = 3, /* bottom field only */ + V4L2_FIELD_INTERLACED = 4, /* both fields interlaced */ + V4L2_FIELD_SEQ_TB = 5, /* both fields sequential into one + buffer, top-bottom order */ + V4L2_FIELD_SEQ_BT = 6, /* same as above + bottom-top order */ + V4L2_FIELD_ALTERNATE = 7, /* both fields alternating into + separate buffers */ + V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field + first and the top field is + transmitted first */ + V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field + first and the bottom field is + transmitted first */ +}; +#define V4L2_FIELD_HAS_TOP(field) \ + ((field) == V4L2_FIELD_TOP ||\ + (field) == V4L2_FIELD_INTERLACED ||\ + (field) == V4L2_FIELD_INTERLACED_TB ||\ + (field) == V4L2_FIELD_INTERLACED_BT ||\ + (field) == V4L2_FIELD_SEQ_TB ||\ + (field) == V4L2_FIELD_SEQ_BT) +#define V4L2_FIELD_HAS_BOTTOM(field) \ + ((field) == V4L2_FIELD_BOTTOM ||\ + (field) == V4L2_FIELD_INTERLACED ||\ + (field) == V4L2_FIELD_INTERLACED_TB ||\ + (field) == V4L2_FIELD_INTERLACED_BT ||\ + (field) == V4L2_FIELD_SEQ_TB ||\ + (field) == V4L2_FIELD_SEQ_BT) +#define V4L2_FIELD_HAS_BOTH(field) \ + ((field) == V4L2_FIELD_INTERLACED ||\ + (field) == V4L2_FIELD_INTERLACED_TB ||\ + (field) == V4L2_FIELD_INTERLACED_BT ||\ + (field) == V4L2_FIELD_SEQ_TB ||\ + (field) == V4L2_FIELD_SEQ_BT) + +enum v4l2_buf_type { + V4L2_BUF_TYPE_VIDEO_CAPTURE = 1, + V4L2_BUF_TYPE_VIDEO_OUTPUT = 2, + V4L2_BUF_TYPE_VIDEO_OVERLAY = 3, + V4L2_BUF_TYPE_VBI_CAPTURE = 4, + V4L2_BUF_TYPE_VBI_OUTPUT = 5, + V4L2_BUF_TYPE_SLICED_VBI_CAPTURE = 6, + V4L2_BUF_TYPE_SLICED_VBI_OUTPUT = 7, +#if 1 /*KEEP*/ + /* Experimental */ + V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8, +#endif + V4L2_BUF_TYPE_PRIVATE = 0x80, +}; + +enum v4l2_ctrl_type { + V4L2_CTRL_TYPE_INTEGER = 1, + V4L2_CTRL_TYPE_BOOLEAN = 2, + V4L2_CTRL_TYPE_MENU = 3, + V4L2_CTRL_TYPE_BUTTON = 4, + V4L2_CTRL_TYPE_INTEGER64 = 5, + V4L2_CTRL_TYPE_CTRL_CLASS = 6, + V4L2_CTRL_TYPE_STRING = 7, +}; + +enum v4l2_tuner_type { + V4L2_TUNER_RADIO = 1, + V4L2_TUNER_ANALOG_TV = 2, + V4L2_TUNER_DIGITAL_TV = 3, +}; + +enum v4l2_memory { + V4L2_MEMORY_MMAP = 1, + V4L2_MEMORY_USERPTR = 2, + V4L2_MEMORY_OVERLAY = 3, +}; + +/* see also http://vektor.theorem.ca/graphics/ycbcr/ */ +enum v4l2_colorspace { + /* ITU-R 601 -- broadcast NTSC/PAL */ + V4L2_COLORSPACE_SMPTE170M = 1, + + /* 1125-Line (US) HDTV */ + V4L2_COLORSPACE_SMPTE240M = 2, + + /* HD and modern captures. */ + V4L2_COLORSPACE_REC709 = 3, + + /* broken BT878 extents (601, luma range 16-253 instead of 16-235) */ + V4L2_COLORSPACE_BT878 = 4, + + /* These should be useful. Assume 601 extents. */ + V4L2_COLORSPACE_470_SYSTEM_M = 5, + V4L2_COLORSPACE_470_SYSTEM_BG = 6, + + /* I know there will be cameras that send this. So, this is + * unspecified chromaticities and full 0-255 on each of the + * Y'CbCr components + */ + V4L2_COLORSPACE_JPEG = 7, + + /* For RGB colourspaces, this is probably a good start. */ + V4L2_COLORSPACE_SRGB = 8, +}; + +enum v4l2_priority { + V4L2_PRIORITY_UNSET = 0, /* not initialized */ + V4L2_PRIORITY_BACKGROUND = 1, + V4L2_PRIORITY_INTERACTIVE = 2, + V4L2_PRIORITY_RECORD = 3, + V4L2_PRIORITY_DEFAULT = V4L2_PRIORITY_INTERACTIVE, +}; + +struct v4l2_rect { + __s32 left; + __s32 top; + __s32 width; + __s32 height; +}; + +struct v4l2_fract { + __u32 numerator; + __u32 denominator; +}; + +/* + * D R I V E R C A P A B I L I T I E S + */ +struct v4l2_capability { + __u8 driver[16]; /* i.e.ie; "bttv" */ + __u8 card[32]; /* i.e.ie; "Hauppauge WinTV" */ + __u8 bus_info[32]; /* "PCI:" + pci_name(pci_dev) */ + __u32 version; /* should use KERNEL_VERSION() */ + __u32 capabilities; /* Device capabilities */ + __u32 reserved[4]; +}; + +/* Values for 'capabilities' field */ +#define V4L2_CAP_VIDEO_CAPTURE 0x00000001 /* Is a video capture device */ +#define V4L2_CAP_VIDEO_OUTPUT 0x00000002 /* Is a video output device */ +#define V4L2_CAP_VIDEO_OVERLAY 0x00000004 /* Can do video overlay */ +#define V4L2_CAP_VBI_CAPTURE 0x00000010 /* Is a raw VBI capture device */ +#define V4L2_CAP_VBI_OUTPUT 0x00000020 /* Is a raw VBI output device */ +#define V4L2_CAP_SLICED_VBI_CAPTURE 0x00000040 /* Is a sliced VBI capture device */ +#define V4L2_CAP_SLICED_VBI_OUTPUT 0x00000080 /* Is a sliced VBI output device */ +#define V4L2_CAP_RDS_CAPTURE 0x00000100 /* RDS data capture */ +#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY 0x00000200 /* Can do video output overlay */ +#define V4L2_CAP_HW_FREQ_SEEK 0x00000400 /* Can do hardware frequency seek */ +#define V4L2_CAP_RDS_OUTPUT 0x00000800 /* Is an RDS encoder */ + +#define V4L2_CAP_TUNER 0x00010000 /* has a tuner */ +#define V4L2_CAP_AUDIO 0x00020000 /* has audio support */ +#define V4L2_CAP_RADIO 0x00040000 /* is a radio device */ +#define V4L2_CAP_MODULATOR 0x00080000 /* has a modulator */ + +#define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */ +#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ +#define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ + +/* + * V I D E O I M A G E F O R M A T + */ +struct v4l2_pix_format { + __u32 width; + __u32 height; + __u32 pixelformat; + enum v4l2_field field; + __u32 bytesperline; /* for padding, zero if unused */ + __u32 sizeimage; + enum v4l2_colorspace colorspace; + __u32 priv; /* private data, depends on pixelformat */ +}; + +/* Pixel format FOURCC depth Description */ + +/* RGB formats */ +#define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R', 'G', 'B', '1') /* 8 RGB-3-3-2 */ +#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */ +#define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */ +#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */ +#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */ +#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */ +#define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */ +#define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */ +#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */ +#define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R', 'G', 'B', '4') /* 32 RGB-8-8-8-8 */ + +/* Grey formats */ +#define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */ +#define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ + +/* Palette formats */ +#define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ + +/* Luminance+Chrominance formats */ +#define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */ +#define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */ +#define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ +#define V4L2_PIX_FMT_UYVY v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_VYUY v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16 YVU422 planar */ +#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16 YVU411 planar */ +#define V4L2_PIX_FMT_Y41P v4l2_fourcc('Y', '4', '1', 'P') /* 12 YUV 4:1:1 */ +#define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */ +#define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */ +#define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */ +#define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */ +#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */ +#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */ +#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */ +#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */ + +/* two planes -- one Y, one Cr + Cb interleaved */ +#define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ +#define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */ +#define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ +#define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ + +/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */ +#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ +#define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ +#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */ +#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10bit raw bayer */ + /* 10bit raw bayer DPCM compressed to 8 bits */ +#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0') + /* + * 10bit raw bayer, expanded to 16 bits + * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb... + */ +#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */ + +/* compressed formats */ +#define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG */ +#define V4L2_PIX_FMT_JPEG v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG */ +#define V4L2_PIX_FMT_DV v4l2_fourcc('d', 'v', 's', 'd') /* 1394 */ +#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 */ + +/* Vendor-specific formats */ +#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */ +#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */ +#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */ +#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */ +#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */ +#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */ +#define V4L2_PIX_FMT_SPCA501 v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */ +#define V4L2_PIX_FMT_SPCA505 v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */ +#define V4L2_PIX_FMT_SPCA508 v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */ +#define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */ +#define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */ +#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */ +#define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ +#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ +#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ +#define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ + +/* + * F O R M A T E N U M E R A T I O N + */ +struct v4l2_fmtdesc { + __u32 index; /* Format number */ + enum v4l2_buf_type type; /* buffer type */ + __u32 flags; + __u8 description[32]; /* Description string */ + __u32 pixelformat; /* Format fourcc */ + __u32 reserved[4]; +}; + +#define V4L2_FMT_FLAG_COMPRESSED 0x0001 +#define V4L2_FMT_FLAG_EMULATED 0x0002 + +#if 1 /*KEEP*/ + /* Experimental Frame Size and frame rate enumeration */ +/* + * F R A M E S I Z E E N U M E R A T I O N + */ +enum v4l2_frmsizetypes { + V4L2_FRMSIZE_TYPE_DISCRETE = 1, + V4L2_FRMSIZE_TYPE_CONTINUOUS = 2, + V4L2_FRMSIZE_TYPE_STEPWISE = 3, +}; + +struct v4l2_frmsize_discrete { + __u32 width; /* Frame width [pixel] */ + __u32 height; /* Frame height [pixel] */ +}; + +struct v4l2_frmsize_stepwise { + __u32 min_width; /* Minimum frame width [pixel] */ + __u32 max_width; /* Maximum frame width [pixel] */ + __u32 step_width; /* Frame width step size [pixel] */ + __u32 min_height; /* Minimum frame height [pixel] */ + __u32 max_height; /* Maximum frame height [pixel] */ + __u32 step_height; /* Frame height step size [pixel] */ +}; + +struct v4l2_frmsizeenum { + __u32 index; /* Frame size number */ + __u32 pixel_format; /* Pixel format */ + __u32 type; /* Frame size type the device supports. */ + + union { /* Frame size */ + struct v4l2_frmsize_discrete discrete; + struct v4l2_frmsize_stepwise stepwise; + }; + + __u32 reserved[2]; /* Reserved space for future use */ +}; + +/* + * F R A M E R A T E E N U M E R A T I O N + */ +enum v4l2_frmivaltypes { + V4L2_FRMIVAL_TYPE_DISCRETE = 1, + V4L2_FRMIVAL_TYPE_CONTINUOUS = 2, + V4L2_FRMIVAL_TYPE_STEPWISE = 3, +}; + +struct v4l2_frmival_stepwise { + struct v4l2_fract min; /* Minimum frame interval [s] */ + struct v4l2_fract max; /* Maximum frame interval [s] */ + struct v4l2_fract step; /* Frame interval step size [s] */ +}; + +struct v4l2_frmivalenum { + __u32 index; /* Frame format index */ + __u32 pixel_format; /* Pixel format */ + __u32 width; /* Frame width */ + __u32 height; /* Frame height */ + __u32 type; /* Frame interval type the device supports. */ + + union { /* Frame interval */ + struct v4l2_fract discrete; + struct v4l2_frmival_stepwise stepwise; + }; + + __u32 reserved[2]; /* Reserved space for future use */ +}; +#endif + +/* + * T I M E C O D E + */ +struct v4l2_timecode { + __u32 type; + __u32 flags; + __u8 frames; + __u8 seconds; + __u8 minutes; + __u8 hours; + __u8 userbits[4]; +}; + +/* Type */ +#define V4L2_TC_TYPE_24FPS 1 +#define V4L2_TC_TYPE_25FPS 2 +#define V4L2_TC_TYPE_30FPS 3 +#define V4L2_TC_TYPE_50FPS 4 +#define V4L2_TC_TYPE_60FPS 5 + +/* Flags */ +#define V4L2_TC_FLAG_DROPFRAME 0x0001 /* "drop-frame" mode */ +#define V4L2_TC_FLAG_COLORFRAME 0x0002 +#define V4L2_TC_USERBITS_field 0x000C +#define V4L2_TC_USERBITS_USERDEFINED 0x0000 +#define V4L2_TC_USERBITS_8BITCHARS 0x0008 +/* The above is based on SMPTE timecodes */ + +struct v4l2_jpegcompression { + int quality; + + int APPn; /* Number of APP segment to be written, + * must be 0..15 */ + int APP_len; /* Length of data in JPEG APPn segment */ + char APP_data[60]; /* Data in the JPEG APPn segment. */ + + int COM_len; /* Length of data in JPEG COM segment */ + char COM_data[60]; /* Data in JPEG COM segment */ + + __u32 jpeg_markers; /* Which markers should go into the JPEG + * output. Unless you exactly know what + * you do, leave them untouched. + * Inluding less markers will make the + * resulting code smaller, but there will + * be fewer aplications which can read it. + * The presence of the APP and COM marker + * is influenced by APP_len and COM_len + * ONLY, not by this property! */ + +#define V4L2_JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */ +#define V4L2_JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */ +#define V4L2_JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */ +#define V4L2_JPEG_MARKER_COM (1<<6) /* Comment segment */ +#define V4L2_JPEG_MARKER_APP (1<<7) /* App segment, driver will + * allways use APP0 */ +}; + +/* + * M E M O R Y - M A P P I N G B U F F E R S + */ +struct v4l2_requestbuffers { + __u32 count; + enum v4l2_buf_type type; + enum v4l2_memory memory; + __u32 reserved[2]; +}; + +struct v4l2_buffer { + __u32 index; + enum v4l2_buf_type type; + __u32 bytesused; + __u32 flags; + enum v4l2_field field; + struct timeval timestamp; + struct v4l2_timecode timecode; + __u32 sequence; + + /* memory location */ + enum v4l2_memory memory; + union { + __u32 offset; + unsigned long userptr; + } m; + __u32 length; + __u32 input; + __u32 reserved; +}; + +/* Flags for 'flags' field */ +#define V4L2_BUF_FLAG_MAPPED 0x0001 /* Buffer is mapped (flag) */ +#define V4L2_BUF_FLAG_QUEUED 0x0002 /* Buffer is queued for processing */ +#define V4L2_BUF_FLAG_DONE 0x0004 /* Buffer is ready */ +#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */ +#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */ +#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */ +#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ +#define V4L2_BUF_FLAG_INPUT 0x0200 /* input field is valid */ + +/* + * O V E R L A Y P R E V I E W + */ +struct v4l2_framebuffer { + __u32 capability; + __u32 flags; +/* FIXME: in theory we should pass something like PCI device + memory + * region + offset instead of some physical address */ + void *base; + struct v4l2_pix_format fmt; +}; +/* Flags for the 'capability' field. Read only */ +#define V4L2_FBUF_CAP_EXTERNOVERLAY 0x0001 +#define V4L2_FBUF_CAP_CHROMAKEY 0x0002 +#define V4L2_FBUF_CAP_LIST_CLIPPING 0x0004 +#define V4L2_FBUF_CAP_BITMAP_CLIPPING 0x0008 +#define V4L2_FBUF_CAP_LOCAL_ALPHA 0x0010 +#define V4L2_FBUF_CAP_GLOBAL_ALPHA 0x0020 +#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA 0x0040 +/* Flags for the 'flags' field. */ +#define V4L2_FBUF_FLAG_PRIMARY 0x0001 +#define V4L2_FBUF_FLAG_OVERLAY 0x0002 +#define V4L2_FBUF_FLAG_CHROMAKEY 0x0004 +#define V4L2_FBUF_FLAG_LOCAL_ALPHA 0x0008 +#define V4L2_FBUF_FLAG_GLOBAL_ALPHA 0x0010 +#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA 0x0020 + +struct v4l2_clip { + struct v4l2_rect c; + struct v4l2_clip __user *next; +}; + +struct v4l2_window { + struct v4l2_rect w; + enum v4l2_field field; + __u32 chromakey; + struct v4l2_clip __user *clips; + __u32 clipcount; + void __user *bitmap; + __u8 global_alpha; +}; + +/* + * C A P T U R E P A R A M E T E R S + */ +struct v4l2_captureparm { + __u32 capability; /* Supported modes */ + __u32 capturemode; /* Current mode */ + struct v4l2_fract timeperframe; /* Time per frame in .1us units */ + __u32 extendedmode; /* Driver-specific extensions */ + __u32 readbuffers; /* # of buffers for read */ + __u32 reserved[4]; +}; + +/* Flags for 'capability' and 'capturemode' fields */ +#define V4L2_MODE_HIGHQUALITY 0x0001 /* High quality imaging mode */ +#define V4L2_CAP_TIMEPERFRAME 0x1000 /* timeperframe field is supported */ + +struct v4l2_outputparm { + __u32 capability; /* Supported modes */ + __u32 outputmode; /* Current mode */ + struct v4l2_fract timeperframe; /* Time per frame in seconds */ + __u32 extendedmode; /* Driver-specific extensions */ + __u32 writebuffers; /* # of buffers for write */ + __u32 reserved[4]; +}; + +/* + * I N P U T I M A G E C R O P P I N G + */ +struct v4l2_cropcap { + enum v4l2_buf_type type; + struct v4l2_rect bounds; + struct v4l2_rect defrect; + struct v4l2_fract pixelaspect; +}; + +struct v4l2_crop { + enum v4l2_buf_type type; + struct v4l2_rect c; +}; + +/* + * A N A L O G V I D E O S T A N D A R D + */ + +typedef __u64 v4l2_std_id; + +/* one bit for each */ +#define V4L2_STD_PAL_B ((v4l2_std_id)0x00000001) +#define V4L2_STD_PAL_B1 ((v4l2_std_id)0x00000002) +#define V4L2_STD_PAL_G ((v4l2_std_id)0x00000004) +#define V4L2_STD_PAL_H ((v4l2_std_id)0x00000008) +#define V4L2_STD_PAL_I ((v4l2_std_id)0x00000010) +#define V4L2_STD_PAL_D ((v4l2_std_id)0x00000020) +#define V4L2_STD_PAL_D1 ((v4l2_std_id)0x00000040) +#define V4L2_STD_PAL_K ((v4l2_std_id)0x00000080) + +#define V4L2_STD_PAL_M ((v4l2_std_id)0x00000100) +#define V4L2_STD_PAL_N ((v4l2_std_id)0x00000200) +#define V4L2_STD_PAL_Nc ((v4l2_std_id)0x00000400) +#define V4L2_STD_PAL_60 ((v4l2_std_id)0x00000800) + +#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) +#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000) +#define V4L2_STD_NTSC_443 ((v4l2_std_id)0x00004000) +#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000) + +#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000) +#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000) +#define V4L2_STD_SECAM_G ((v4l2_std_id)0x00040000) +#define V4L2_STD_SECAM_H ((v4l2_std_id)0x00080000) +#define V4L2_STD_SECAM_K ((v4l2_std_id)0x00100000) +#define V4L2_STD_SECAM_K1 ((v4l2_std_id)0x00200000) +#define V4L2_STD_SECAM_L ((v4l2_std_id)0x00400000) +#define V4L2_STD_SECAM_LC ((v4l2_std_id)0x00800000) + +/* ATSC/HDTV */ +#define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000) +#define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000) + +/* FIXME: + Although std_id is 64 bits, there is an issue on PPC32 architecture that + makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding + this value to 32 bits. + As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide), + it should work fine. However, if needed to add more than two standards, + v4l2-common.c should be fixed. + */ + +/* some merged standards */ +#define V4L2_STD_MN (V4L2_STD_PAL_M|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc|V4L2_STD_NTSC) +#define V4L2_STD_B (V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_SECAM_B) +#define V4L2_STD_GH (V4L2_STD_PAL_G|V4L2_STD_PAL_H|V4L2_STD_SECAM_G|V4L2_STD_SECAM_H) +#define V4L2_STD_DK (V4L2_STD_PAL_DK|V4L2_STD_SECAM_DK) + +/* some common needed stuff */ +#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\ + V4L2_STD_PAL_B1 |\ + V4L2_STD_PAL_G) +#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\ + V4L2_STD_PAL_D1 |\ + V4L2_STD_PAL_K) +#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\ + V4L2_STD_PAL_DK |\ + V4L2_STD_PAL_H |\ + V4L2_STD_PAL_I) +#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\ + V4L2_STD_NTSC_M_JP |\ + V4L2_STD_NTSC_M_KR) +#define V4L2_STD_SECAM_DK (V4L2_STD_SECAM_D |\ + V4L2_STD_SECAM_K |\ + V4L2_STD_SECAM_K1) +#define V4L2_STD_SECAM (V4L2_STD_SECAM_B |\ + V4L2_STD_SECAM_G |\ + V4L2_STD_SECAM_H |\ + V4L2_STD_SECAM_DK |\ + V4L2_STD_SECAM_L |\ + V4L2_STD_SECAM_LC) + +#define V4L2_STD_525_60 (V4L2_STD_PAL_M |\ + V4L2_STD_PAL_60 |\ + V4L2_STD_NTSC |\ + V4L2_STD_NTSC_443) +#define V4L2_STD_625_50 (V4L2_STD_PAL |\ + V4L2_STD_PAL_N |\ + V4L2_STD_PAL_Nc |\ + V4L2_STD_SECAM) +#define V4L2_STD_ATSC (V4L2_STD_ATSC_8_VSB |\ + V4L2_STD_ATSC_16_VSB) + +#define V4L2_STD_UNKNOWN 0 +#define V4L2_STD_ALL (V4L2_STD_525_60 |\ + V4L2_STD_625_50) + +struct v4l2_standard { + __u32 index; + v4l2_std_id id; + __u8 name[24]; + struct v4l2_fract frameperiod; /* Frames, not fields */ + __u32 framelines; + __u32 reserved[4]; +}; + +/* + * V I D E O I N P U T S + */ +struct v4l2_input { + __u32 index; /* Which input */ + __u8 name[32]; /* Label */ + __u32 type; /* Type of input */ + __u32 audioset; /* Associated audios (bitfield) */ + __u32 tuner; /* Associated tuner */ + v4l2_std_id std; + __u32 status; + __u32 reserved[4]; +}; + +/* Values for the 'type' field */ +#define V4L2_INPUT_TYPE_TUNER 1 +#define V4L2_INPUT_TYPE_CAMERA 2 + +/* field 'status' - general */ +#define V4L2_IN_ST_NO_POWER 0x00000001 /* Attached device is off */ +#define V4L2_IN_ST_NO_SIGNAL 0x00000002 +#define V4L2_IN_ST_NO_COLOR 0x00000004 + +/* field 'status' - sensor orientation */ +/* If sensor is mounted upside down set both bits */ +#define V4L2_IN_ST_HFLIP 0x00000010 /* Frames are flipped horizontally */ +#define V4L2_IN_ST_VFLIP 0x00000020 /* Frames are flipped vertically */ + +/* field 'status' - analog */ +#define V4L2_IN_ST_NO_H_LOCK 0x00000100 /* No horizontal sync lock */ +#define V4L2_IN_ST_COLOR_KILL 0x00000200 /* Color killer is active */ + +/* field 'status' - digital */ +#define V4L2_IN_ST_NO_SYNC 0x00010000 /* No synchronization lock */ +#define V4L2_IN_ST_NO_EQU 0x00020000 /* No equalizer lock */ +#define V4L2_IN_ST_NO_CARRIER 0x00040000 /* Carrier recovery failed */ + +/* field 'status' - VCR and set-top box */ +#define V4L2_IN_ST_MACROVISION 0x01000000 /* Macrovision detected */ +#define V4L2_IN_ST_NO_ACCESS 0x02000000 /* Conditional access denied */ +#define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */ + +/* + * V I D E O O U T P U T S + */ +struct v4l2_output { + __u32 index; /* Which output */ + __u8 name[32]; /* Label */ + __u32 type; /* Type of output */ + __u32 audioset; /* Associated audios (bitfield) */ + __u32 modulator; /* Associated modulator */ + v4l2_std_id std; + __u32 reserved[4]; +}; +/* Values for the 'type' field */ +#define V4L2_OUTPUT_TYPE_MODULATOR 1 +#define V4L2_OUTPUT_TYPE_ANALOG 2 +#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3 + +/* + * C O N T R O L S + */ +struct v4l2_control { + __u32 id; + __s32 value; +}; + +struct v4l2_ext_control { + __u32 id; + __u32 size; + __u32 reserved2[1]; + union { + __s32 value; + __s64 value64; + char *string; + }; +} __attribute__ ((packed)); + +struct v4l2_ext_controls { + __u32 ctrl_class; + __u32 count; + __u32 error_idx; + __u32 reserved[2]; + struct v4l2_ext_control *controls; +}; + +/* Values for ctrl_class field */ +#define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */ +#define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */ +#define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ +#define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator control class */ + +#define V4L2_CTRL_ID_MASK (0x0fffffff) +#define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) +#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000) + +/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ +struct v4l2_queryctrl { + __u32 id; + enum v4l2_ctrl_type type; + __u8 name[32]; /* Whatever */ + __s32 minimum; /* Note signedness */ + __s32 maximum; + __s32 step; + __s32 default_value; + __u32 flags; + __u32 reserved[2]; +}; + +/* Used in the VIDIOC_QUERYMENU ioctl for querying menu items */ +struct v4l2_querymenu { + __u32 id; + __u32 index; + __u8 name[32]; /* Whatever */ + __u32 reserved; +}; + +/* Control flags */ +#define V4L2_CTRL_FLAG_DISABLED 0x0001 +#define V4L2_CTRL_FLAG_GRABBED 0x0002 +#define V4L2_CTRL_FLAG_READ_ONLY 0x0004 +#define V4L2_CTRL_FLAG_UPDATE 0x0008 +#define V4L2_CTRL_FLAG_INACTIVE 0x0010 +#define V4L2_CTRL_FLAG_SLIDER 0x0020 +#define V4L2_CTRL_FLAG_WRITE_ONLY 0x0040 + +/* Query flag, to be ORed with the control ID */ +#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000 + +/* User-class control IDs defined by V4L2 */ +#define V4L2_CID_BASE (V4L2_CTRL_CLASS_USER | 0x900) +#define V4L2_CID_USER_BASE V4L2_CID_BASE +/* IDs reserved for driver specific controls */ +#define V4L2_CID_PRIVATE_BASE 0x08000000 + +#define V4L2_CID_USER_CLASS (V4L2_CTRL_CLASS_USER | 1) +#define V4L2_CID_BRIGHTNESS (V4L2_CID_BASE+0) +#define V4L2_CID_CONTRAST (V4L2_CID_BASE+1) +#define V4L2_CID_SATURATION (V4L2_CID_BASE+2) +#define V4L2_CID_HUE (V4L2_CID_BASE+3) +#define V4L2_CID_AUDIO_VOLUME (V4L2_CID_BASE+5) +#define V4L2_CID_AUDIO_BALANCE (V4L2_CID_BASE+6) +#define V4L2_CID_AUDIO_BASS (V4L2_CID_BASE+7) +#define V4L2_CID_AUDIO_TREBLE (V4L2_CID_BASE+8) +#define V4L2_CID_AUDIO_MUTE (V4L2_CID_BASE+9) +#define V4L2_CID_AUDIO_LOUDNESS (V4L2_CID_BASE+10) +#define V4L2_CID_BLACK_LEVEL (V4L2_CID_BASE+11) /* Deprecated */ +#define V4L2_CID_AUTO_WHITE_BALANCE (V4L2_CID_BASE+12) +#define V4L2_CID_DO_WHITE_BALANCE (V4L2_CID_BASE+13) +#define V4L2_CID_RED_BALANCE (V4L2_CID_BASE+14) +#define V4L2_CID_BLUE_BALANCE (V4L2_CID_BASE+15) +#define V4L2_CID_GAMMA (V4L2_CID_BASE+16) +#define V4L2_CID_WHITENESS (V4L2_CID_GAMMA) /* Deprecated */ +#define V4L2_CID_EXPOSURE (V4L2_CID_BASE+17) +#define V4L2_CID_AUTOGAIN (V4L2_CID_BASE+18) +#define V4L2_CID_GAIN (V4L2_CID_BASE+19) +#define V4L2_CID_HFLIP (V4L2_CID_BASE+20) +#define V4L2_CID_VFLIP (V4L2_CID_BASE+21) + +/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ +#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) +#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) + +#define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24) +enum v4l2_power_line_frequency { + V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0, + V4L2_CID_POWER_LINE_FREQUENCY_50HZ = 1, + V4L2_CID_POWER_LINE_FREQUENCY_60HZ = 2, +}; +#define V4L2_CID_HUE_AUTO (V4L2_CID_BASE+25) +#define V4L2_CID_WHITE_BALANCE_TEMPERATURE (V4L2_CID_BASE+26) +#define V4L2_CID_SHARPNESS (V4L2_CID_BASE+27) +#define V4L2_CID_BACKLIGHT_COMPENSATION (V4L2_CID_BASE+28) +#define V4L2_CID_CHROMA_AGC (V4L2_CID_BASE+29) +#define V4L2_CID_COLOR_KILLER (V4L2_CID_BASE+30) +#define V4L2_CID_COLORFX (V4L2_CID_BASE+31) +enum v4l2_colorfx { + V4L2_COLORFX_NONE = 0, + V4L2_COLORFX_BW = 1, + V4L2_COLORFX_SEPIA = 2, +}; +#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32) +#define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33) + +/* last CID + 1 */ +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+34) + +/* MPEG-class control IDs defined by V4L2 */ +#define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) +#define V4L2_CID_MPEG_CLASS (V4L2_CTRL_CLASS_MPEG | 1) + +/* MPEG streams */ +#define V4L2_CID_MPEG_STREAM_TYPE (V4L2_CID_MPEG_BASE+0) +enum v4l2_mpeg_stream_type { + V4L2_MPEG_STREAM_TYPE_MPEG2_PS = 0, /* MPEG-2 program stream */ + V4L2_MPEG_STREAM_TYPE_MPEG2_TS = 1, /* MPEG-2 transport stream */ + V4L2_MPEG_STREAM_TYPE_MPEG1_SS = 2, /* MPEG-1 system stream */ + V4L2_MPEG_STREAM_TYPE_MPEG2_DVD = 3, /* MPEG-2 DVD-compatible stream */ + V4L2_MPEG_STREAM_TYPE_MPEG1_VCD = 4, /* MPEG-1 VCD-compatible stream */ + V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD = 5, /* MPEG-2 SVCD-compatible stream */ +}; +#define V4L2_CID_MPEG_STREAM_PID_PMT (V4L2_CID_MPEG_BASE+1) +#define V4L2_CID_MPEG_STREAM_PID_AUDIO (V4L2_CID_MPEG_BASE+2) +#define V4L2_CID_MPEG_STREAM_PID_VIDEO (V4L2_CID_MPEG_BASE+3) +#define V4L2_CID_MPEG_STREAM_PID_PCR (V4L2_CID_MPEG_BASE+4) +#define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO (V4L2_CID_MPEG_BASE+5) +#define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO (V4L2_CID_MPEG_BASE+6) +#define V4L2_CID_MPEG_STREAM_VBI_FMT (V4L2_CID_MPEG_BASE+7) +enum v4l2_mpeg_stream_vbi_fmt { + V4L2_MPEG_STREAM_VBI_FMT_NONE = 0, /* No VBI in the MPEG stream */ + V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1, /* VBI in private packets, IVTV format */ +}; + +/* MPEG audio */ +#define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ (V4L2_CID_MPEG_BASE+100) +enum v4l2_mpeg_audio_sampling_freq { + V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000 = 1, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000 = 2, +}; +#define V4L2_CID_MPEG_AUDIO_ENCODING (V4L2_CID_MPEG_BASE+101) +enum v4l2_mpeg_audio_encoding { + V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0, + V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1, + V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2, + V4L2_MPEG_AUDIO_ENCODING_AAC = 3, + V4L2_MPEG_AUDIO_ENCODING_AC3 = 4, +}; +#define V4L2_CID_MPEG_AUDIO_L1_BITRATE (V4L2_CID_MPEG_BASE+102) +enum v4l2_mpeg_audio_l1_bitrate { + V4L2_MPEG_AUDIO_L1_BITRATE_32K = 0, + V4L2_MPEG_AUDIO_L1_BITRATE_64K = 1, + V4L2_MPEG_AUDIO_L1_BITRATE_96K = 2, + V4L2_MPEG_AUDIO_L1_BITRATE_128K = 3, + V4L2_MPEG_AUDIO_L1_BITRATE_160K = 4, + V4L2_MPEG_AUDIO_L1_BITRATE_192K = 5, + V4L2_MPEG_AUDIO_L1_BITRATE_224K = 6, + V4L2_MPEG_AUDIO_L1_BITRATE_256K = 7, + V4L2_MPEG_AUDIO_L1_BITRATE_288K = 8, + V4L2_MPEG_AUDIO_L1_BITRATE_320K = 9, + V4L2_MPEG_AUDIO_L1_BITRATE_352K = 10, + V4L2_MPEG_AUDIO_L1_BITRATE_384K = 11, + V4L2_MPEG_AUDIO_L1_BITRATE_416K = 12, + V4L2_MPEG_AUDIO_L1_BITRATE_448K = 13, +}; +#define V4L2_CID_MPEG_AUDIO_L2_BITRATE (V4L2_CID_MPEG_BASE+103) +enum v4l2_mpeg_audio_l2_bitrate { + V4L2_MPEG_AUDIO_L2_BITRATE_32K = 0, + V4L2_MPEG_AUDIO_L2_BITRATE_48K = 1, + V4L2_MPEG_AUDIO_L2_BITRATE_56K = 2, + V4L2_MPEG_AUDIO_L2_BITRATE_64K = 3, + V4L2_MPEG_AUDIO_L2_BITRATE_80K = 4, + V4L2_MPEG_AUDIO_L2_BITRATE_96K = 5, + V4L2_MPEG_AUDIO_L2_BITRATE_112K = 6, + V4L2_MPEG_AUDIO_L2_BITRATE_128K = 7, + V4L2_MPEG_AUDIO_L2_BITRATE_160K = 8, + V4L2_MPEG_AUDIO_L2_BITRATE_192K = 9, + V4L2_MPEG_AUDIO_L2_BITRATE_224K = 10, + V4L2_MPEG_AUDIO_L2_BITRATE_256K = 11, + V4L2_MPEG_AUDIO_L2_BITRATE_320K = 12, + V4L2_MPEG_AUDIO_L2_BITRATE_384K = 13, +}; +#define V4L2_CID_MPEG_AUDIO_L3_BITRATE (V4L2_CID_MPEG_BASE+104) +enum v4l2_mpeg_audio_l3_bitrate { + V4L2_MPEG_AUDIO_L3_BITRATE_32K = 0, + V4L2_MPEG_AUDIO_L3_BITRATE_40K = 1, + V4L2_MPEG_AUDIO_L3_BITRATE_48K = 2, + V4L2_MPEG_AUDIO_L3_BITRATE_56K = 3, + V4L2_MPEG_AUDIO_L3_BITRATE_64K = 4, + V4L2_MPEG_AUDIO_L3_BITRATE_80K = 5, + V4L2_MPEG_AUDIO_L3_BITRATE_96K = 6, + V4L2_MPEG_AUDIO_L3_BITRATE_112K = 7, + V4L2_MPEG_AUDIO_L3_BITRATE_128K = 8, + V4L2_MPEG_AUDIO_L3_BITRATE_160K = 9, + V4L2_MPEG_AUDIO_L3_BITRATE_192K = 10, + V4L2_MPEG_AUDIO_L3_BITRATE_224K = 11, + V4L2_MPEG_AUDIO_L3_BITRATE_256K = 12, + V4L2_MPEG_AUDIO_L3_BITRATE_320K = 13, +}; +#define V4L2_CID_MPEG_AUDIO_MODE (V4L2_CID_MPEG_BASE+105) +enum v4l2_mpeg_audio_mode { + V4L2_MPEG_AUDIO_MODE_STEREO = 0, + V4L2_MPEG_AUDIO_MODE_JOINT_STEREO = 1, + V4L2_MPEG_AUDIO_MODE_DUAL = 2, + V4L2_MPEG_AUDIO_MODE_MONO = 3, +}; +#define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION (V4L2_CID_MPEG_BASE+106) +enum v4l2_mpeg_audio_mode_extension { + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4 = 0, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8 = 1, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12 = 2, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16 = 3, +}; +#define V4L2_CID_MPEG_AUDIO_EMPHASIS (V4L2_CID_MPEG_BASE+107) +enum v4l2_mpeg_audio_emphasis { + V4L2_MPEG_AUDIO_EMPHASIS_NONE = 0, + V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS = 1, + V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17 = 2, +}; +#define V4L2_CID_MPEG_AUDIO_CRC (V4L2_CID_MPEG_BASE+108) +enum v4l2_mpeg_audio_crc { + V4L2_MPEG_AUDIO_CRC_NONE = 0, + V4L2_MPEG_AUDIO_CRC_CRC16 = 1, +}; +#define V4L2_CID_MPEG_AUDIO_MUTE (V4L2_CID_MPEG_BASE+109) +#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE (V4L2_CID_MPEG_BASE+110) +#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE (V4L2_CID_MPEG_BASE+111) +enum v4l2_mpeg_audio_ac3_bitrate { + V4L2_MPEG_AUDIO_AC3_BITRATE_32K = 0, + V4L2_MPEG_AUDIO_AC3_BITRATE_40K = 1, + V4L2_MPEG_AUDIO_AC3_BITRATE_48K = 2, + V4L2_MPEG_AUDIO_AC3_BITRATE_56K = 3, + V4L2_MPEG_AUDIO_AC3_BITRATE_64K = 4, + V4L2_MPEG_AUDIO_AC3_BITRATE_80K = 5, + V4L2_MPEG_AUDIO_AC3_BITRATE_96K = 6, + V4L2_MPEG_AUDIO_AC3_BITRATE_112K = 7, + V4L2_MPEG_AUDIO_AC3_BITRATE_128K = 8, + V4L2_MPEG_AUDIO_AC3_BITRATE_160K = 9, + V4L2_MPEG_AUDIO_AC3_BITRATE_192K = 10, + V4L2_MPEG_AUDIO_AC3_BITRATE_224K = 11, + V4L2_MPEG_AUDIO_AC3_BITRATE_256K = 12, + V4L2_MPEG_AUDIO_AC3_BITRATE_320K = 13, + V4L2_MPEG_AUDIO_AC3_BITRATE_384K = 14, + V4L2_MPEG_AUDIO_AC3_BITRATE_448K = 15, + V4L2_MPEG_AUDIO_AC3_BITRATE_512K = 16, + V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17, + V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18, +}; + +/* MPEG video */ +#define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_MPEG_BASE+200) +enum v4l2_mpeg_video_encoding { + V4L2_MPEG_VIDEO_ENCODING_MPEG_1 = 0, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2 = 1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2, +}; +#define V4L2_CID_MPEG_VIDEO_ASPECT (V4L2_CID_MPEG_BASE+201) +enum v4l2_mpeg_video_aspect { + V4L2_MPEG_VIDEO_ASPECT_1x1 = 0, + V4L2_MPEG_VIDEO_ASPECT_4x3 = 1, + V4L2_MPEG_VIDEO_ASPECT_16x9 = 2, + V4L2_MPEG_VIDEO_ASPECT_221x100 = 3, +}; +#define V4L2_CID_MPEG_VIDEO_B_FRAMES (V4L2_CID_MPEG_BASE+202) +#define V4L2_CID_MPEG_VIDEO_GOP_SIZE (V4L2_CID_MPEG_BASE+203) +#define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE (V4L2_CID_MPEG_BASE+204) +#define V4L2_CID_MPEG_VIDEO_PULLDOWN (V4L2_CID_MPEG_BASE+205) +#define V4L2_CID_MPEG_VIDEO_BITRATE_MODE (V4L2_CID_MPEG_BASE+206) +enum v4l2_mpeg_video_bitrate_mode { + V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0, + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1, +}; +#define V4L2_CID_MPEG_VIDEO_BITRATE (V4L2_CID_MPEG_BASE+207) +#define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (V4L2_CID_MPEG_BASE+208) +#define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209) +#define V4L2_CID_MPEG_VIDEO_MUTE (V4L2_CID_MPEG_BASE+210) +#define V4L2_CID_MPEG_VIDEO_MUTE_YUV (V4L2_CID_MPEG_BASE+211) + +/* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ +#define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000) +#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+0) +enum v4l2_mpeg_cx2341x_video_spatial_filter_mode { + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO = 1, +}; +#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER (V4L2_CID_MPEG_CX2341X_BASE+1) +#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+2) +enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type { + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF = 0, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR = 1, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT = 2, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE = 3, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE = 4, +}; +#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+3) +enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type { + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF = 0, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR = 1, +}; +#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+4) +enum v4l2_mpeg_cx2341x_video_temporal_filter_mode { + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL = 0, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO = 1, +}; +#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (V4L2_CID_MPEG_CX2341X_BASE+5) +#define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+6) +enum v4l2_mpeg_cx2341x_video_median_filter_type { + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF = 0, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR = 1, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT = 2, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT = 3, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG = 4, +}; +#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_MPEG_CX2341X_BASE+7) +#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP (V4L2_CID_MPEG_CX2341X_BASE+8) +#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_MPEG_CX2341X_BASE+9) +#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (V4L2_CID_MPEG_CX2341X_BASE+10) +#define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (V4L2_CID_MPEG_CX2341X_BASE+11) + +/* Camera class control IDs */ +#define V4L2_CID_CAMERA_CLASS_BASE (V4L2_CTRL_CLASS_CAMERA | 0x900) +#define V4L2_CID_CAMERA_CLASS (V4L2_CTRL_CLASS_CAMERA | 1) + +#define V4L2_CID_EXPOSURE_AUTO (V4L2_CID_CAMERA_CLASS_BASE+1) +enum v4l2_exposure_auto_type { + V4L2_EXPOSURE_AUTO = 0, + V4L2_EXPOSURE_MANUAL = 1, + V4L2_EXPOSURE_SHUTTER_PRIORITY = 2, + V4L2_EXPOSURE_APERTURE_PRIORITY = 3 +}; +#define V4L2_CID_EXPOSURE_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+2) +#define V4L2_CID_EXPOSURE_AUTO_PRIORITY (V4L2_CID_CAMERA_CLASS_BASE+3) + +#define V4L2_CID_PAN_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+4) +#define V4L2_CID_TILT_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+5) +#define V4L2_CID_PAN_RESET (V4L2_CID_CAMERA_CLASS_BASE+6) +#define V4L2_CID_TILT_RESET (V4L2_CID_CAMERA_CLASS_BASE+7) + +#define V4L2_CID_PAN_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+8) +#define V4L2_CID_TILT_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+9) + +#define V4L2_CID_FOCUS_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+10) +#define V4L2_CID_FOCUS_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+11) +#define V4L2_CID_FOCUS_AUTO (V4L2_CID_CAMERA_CLASS_BASE+12) + +#define V4L2_CID_ZOOM_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+13) +#define V4L2_CID_ZOOM_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+14) +#define V4L2_CID_ZOOM_CONTINUOUS (V4L2_CID_CAMERA_CLASS_BASE+15) + +#define V4L2_CID_PRIVACY (V4L2_CID_CAMERA_CLASS_BASE+16) + +/* FM Modulator class control IDs */ +#define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900) +#define V4L2_CID_FM_TX_CLASS (V4L2_CTRL_CLASS_FM_TX | 1) + +#define V4L2_CID_RDS_TX_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 1) +#define V4L2_CID_RDS_TX_PI (V4L2_CID_FM_TX_CLASS_BASE + 2) +#define V4L2_CID_RDS_TX_PTY (V4L2_CID_FM_TX_CLASS_BASE + 3) +#define V4L2_CID_RDS_TX_PS_NAME (V4L2_CID_FM_TX_CLASS_BASE + 5) +#define V4L2_CID_RDS_TX_RADIO_TEXT (V4L2_CID_FM_TX_CLASS_BASE + 6) + +#define V4L2_CID_AUDIO_LIMITER_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 64) +#define V4L2_CID_AUDIO_LIMITER_RELEASE_TIME (V4L2_CID_FM_TX_CLASS_BASE + 65) +#define V4L2_CID_AUDIO_LIMITER_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 66) + +#define V4L2_CID_AUDIO_COMPRESSION_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 80) +#define V4L2_CID_AUDIO_COMPRESSION_GAIN (V4L2_CID_FM_TX_CLASS_BASE + 81) +#define V4L2_CID_AUDIO_COMPRESSION_THRESHOLD (V4L2_CID_FM_TX_CLASS_BASE + 82) +#define V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME (V4L2_CID_FM_TX_CLASS_BASE + 83) +#define V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME (V4L2_CID_FM_TX_CLASS_BASE + 84) + +#define V4L2_CID_PILOT_TONE_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 96) +#define V4L2_CID_PILOT_TONE_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 97) +#define V4L2_CID_PILOT_TONE_FREQUENCY (V4L2_CID_FM_TX_CLASS_BASE + 98) + +#define V4L2_CID_TUNE_PREEMPHASIS (V4L2_CID_FM_TX_CLASS_BASE + 112) +enum v4l2_preemphasis { + V4L2_PREEMPHASIS_DISABLED = 0, + V4L2_PREEMPHASIS_50_uS = 1, + V4L2_PREEMPHASIS_75_uS = 2, +}; +#define V4L2_CID_TUNE_POWER_LEVEL (V4L2_CID_FM_TX_CLASS_BASE + 113) +#define V4L2_CID_TUNE_ANTENNA_CAPACITOR (V4L2_CID_FM_TX_CLASS_BASE + 114) + +/* + * T U N I N G + */ +struct v4l2_tuner { + __u32 index; + __u8 name[32]; + enum v4l2_tuner_type type; + __u32 capability; + __u32 rangelow; + __u32 rangehigh; + __u32 rxsubchans; + __u32 audmode; + __s32 signal; + __s32 afc; + __u32 reserved[4]; +}; + +struct v4l2_modulator { + __u32 index; + __u8 name[32]; + __u32 capability; + __u32 rangelow; + __u32 rangehigh; + __u32 txsubchans; + __u32 reserved[4]; +}; + +/* Flags for the 'capability' field */ +#define V4L2_TUNER_CAP_LOW 0x0001 +#define V4L2_TUNER_CAP_NORM 0x0002 +#define V4L2_TUNER_CAP_STEREO 0x0010 +#define V4L2_TUNER_CAP_LANG2 0x0020 +#define V4L2_TUNER_CAP_SAP 0x0020 +#define V4L2_TUNER_CAP_LANG1 0x0040 +#define V4L2_TUNER_CAP_RDS 0x0080 + +/* Flags for the 'rxsubchans' field */ +#define V4L2_TUNER_SUB_MONO 0x0001 +#define V4L2_TUNER_SUB_STEREO 0x0002 +#define V4L2_TUNER_SUB_LANG2 0x0004 +#define V4L2_TUNER_SUB_SAP 0x0004 +#define V4L2_TUNER_SUB_LANG1 0x0008 +#define V4L2_TUNER_SUB_RDS 0x0010 + +/* Values for the 'audmode' field */ +#define V4L2_TUNER_MODE_MONO 0x0000 +#define V4L2_TUNER_MODE_STEREO 0x0001 +#define V4L2_TUNER_MODE_LANG2 0x0002 +#define V4L2_TUNER_MODE_SAP 0x0002 +#define V4L2_TUNER_MODE_LANG1 0x0003 +#define V4L2_TUNER_MODE_LANG1_LANG2 0x0004 + +struct v4l2_frequency { + __u32 tuner; + enum v4l2_tuner_type type; + __u32 frequency; + __u32 reserved[8]; +}; + +struct v4l2_hw_freq_seek { + __u32 tuner; + enum v4l2_tuner_type type; + __u32 seek_upward; + __u32 wrap_around; + __u32 reserved[8]; +}; + +/* + * R D S + */ + +struct v4l2_rds_data { + __u8 lsb; + __u8 msb; + __u8 block; +} __attribute__ ((packed)); + +#define V4L2_RDS_BLOCK_MSK 0x7 +#define V4L2_RDS_BLOCK_A 0 +#define V4L2_RDS_BLOCK_B 1 +#define V4L2_RDS_BLOCK_C 2 +#define V4L2_RDS_BLOCK_D 3 +#define V4L2_RDS_BLOCK_C_ALT 4 +#define V4L2_RDS_BLOCK_INVALID 7 + +#define V4L2_RDS_BLOCK_CORRECTED 0x40 +#define V4L2_RDS_BLOCK_ERROR 0x80 + +/* + * A U D I O + */ +struct v4l2_audio { + __u32 index; + __u8 name[32]; + __u32 capability; + __u32 mode; + __u32 reserved[2]; +}; + +/* Flags for the 'capability' field */ +#define V4L2_AUDCAP_STEREO 0x00001 +#define V4L2_AUDCAP_AVL 0x00002 + +/* Flags for the 'mode' field */ +#define V4L2_AUDMODE_AVL 0x00001 + +struct v4l2_audioout { + __u32 index; + __u8 name[32]; + __u32 capability; + __u32 mode; + __u32 reserved[2]; +}; + +/* + * M P E G S E R V I C E S + * + * NOTE: EXPERIMENTAL API + */ +#if 1 /*KEEP*/ +#define V4L2_ENC_IDX_FRAME_I (0) +#define V4L2_ENC_IDX_FRAME_P (1) +#define V4L2_ENC_IDX_FRAME_B (2) +#define V4L2_ENC_IDX_FRAME_MASK (0xf) + +struct v4l2_enc_idx_entry { + __u64 offset; + __u64 pts; + __u32 length; + __u32 flags; + __u32 reserved[2]; +}; + +#define V4L2_ENC_IDX_ENTRIES (64) +struct v4l2_enc_idx { + __u32 entries; + __u32 entries_cap; + __u32 reserved[4]; + struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES]; +}; + + +#define V4L2_ENC_CMD_START (0) +#define V4L2_ENC_CMD_STOP (1) +#define V4L2_ENC_CMD_PAUSE (2) +#define V4L2_ENC_CMD_RESUME (3) + +/* Flags for V4L2_ENC_CMD_STOP */ +#define V4L2_ENC_CMD_STOP_AT_GOP_END (1 << 0) + +struct v4l2_encoder_cmd { + __u32 cmd; + __u32 flags; + union { + struct { + __u32 data[8]; + } raw; + }; +}; + +#endif + + +/* + * D A T A S E R V I C E S ( V B I ) + * + * Data services API by Michael Schimek + */ + +/* Raw VBI */ +struct v4l2_vbi_format { + __u32 sampling_rate; /* in 1 Hz */ + __u32 offset; + __u32 samples_per_line; + __u32 sample_format; /* V4L2_PIX_FMT_* */ + __s32 start[2]; + __u32 count[2]; + __u32 flags; /* V4L2_VBI_* */ + __u32 reserved[2]; /* must be zero */ +}; + +/* VBI flags */ +#define V4L2_VBI_UNSYNC (1 << 0) +#define V4L2_VBI_INTERLACED (1 << 1) + +/* Sliced VBI + * + * This implements is a proposal V4L2 API to allow SLICED VBI + * required for some hardware encoders. It should change without + * notice in the definitive implementation. + */ + +struct v4l2_sliced_vbi_format { + __u16 service_set; + /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field + service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field + (equals frame lines 313-336 for 625 line video + standards, 263-286 for 525 line standards) */ + __u16 service_lines[2][24]; + __u32 io_size; + __u32 reserved[2]; /* must be zero */ +}; + +/* Teletext World System Teletext + (WST), defined on ITU-R BT.653-2 */ +#define V4L2_SLICED_TELETEXT_B (0x0001) +/* Video Program System, defined on ETS 300 231*/ +#define V4L2_SLICED_VPS (0x0400) +/* Closed Caption, defined on EIA-608 */ +#define V4L2_SLICED_CAPTION_525 (0x1000) +/* Wide Screen System, defined on ITU-R BT1119.1 */ +#define V4L2_SLICED_WSS_625 (0x4000) + +#define V4L2_SLICED_VBI_525 (V4L2_SLICED_CAPTION_525) +#define V4L2_SLICED_VBI_625 (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625) + +struct v4l2_sliced_vbi_cap { + __u16 service_set; + /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field + service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field + (equals frame lines 313-336 for 625 line video + standards, 263-286 for 525 line standards) */ + __u16 service_lines[2][24]; + enum v4l2_buf_type type; + __u32 reserved[3]; /* must be 0 */ +}; + +struct v4l2_sliced_vbi_data { + __u32 id; + __u32 field; /* 0: first field, 1: second field */ + __u32 line; /* 1-23 */ + __u32 reserved; /* must be 0 */ + __u8 data[48]; +}; + +/* + * Sliced VBI data inserted into MPEG Streams + */ + +/* + * V4L2_MPEG_STREAM_VBI_FMT_IVTV: + * + * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an + * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI + * data + * + * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header + * definitions are not included here. See the MPEG-2 specifications for details + * on these headers. + */ + +/* Line type IDs */ +#define V4L2_MPEG_VBI_IVTV_TELETEXT_B (1) +#define V4L2_MPEG_VBI_IVTV_CAPTION_525 (4) +#define V4L2_MPEG_VBI_IVTV_WSS_625 (5) +#define V4L2_MPEG_VBI_IVTV_VPS (7) + +struct v4l2_mpeg_vbi_itv0_line { + __u8 id; /* One of V4L2_MPEG_VBI_IVTV_* above */ + __u8 data[42]; /* Sliced VBI data for the line */ +} __attribute__ ((packed)); + +struct v4l2_mpeg_vbi_itv0 { + __le32 linemask[2]; /* Bitmasks of VBI service lines present */ + struct v4l2_mpeg_vbi_itv0_line line[35]; +} __attribute__ ((packed)); + +struct v4l2_mpeg_vbi_ITV0 { + struct v4l2_mpeg_vbi_itv0_line line[36]; +} __attribute__ ((packed)); + +#define V4L2_MPEG_VBI_IVTV_MAGIC0 "itv0" +#define V4L2_MPEG_VBI_IVTV_MAGIC1 "ITV0" + +struct v4l2_mpeg_vbi_fmt_ivtv { + __u8 magic[4]; + union { + struct v4l2_mpeg_vbi_itv0 itv0; + struct v4l2_mpeg_vbi_ITV0 ITV0; + }; +} __attribute__ ((packed)); + +/* + * A G G R E G A T E S T R U C T U R E S + */ + +/* Stream data format + */ +struct v4l2_format { + enum v4l2_buf_type type; + union { + struct v4l2_pix_format pix; /* V4L2_BUF_TYPE_VIDEO_CAPTURE */ + struct v4l2_window win; /* V4L2_BUF_TYPE_VIDEO_OVERLAY */ + struct v4l2_vbi_format vbi; /* V4L2_BUF_TYPE_VBI_CAPTURE */ + struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */ + __u8 raw_data[200]; /* user-defined */ + } fmt; +}; + + +/* Stream type-dependent parameters + */ +struct v4l2_streamparm { + enum v4l2_buf_type type; + union { + struct v4l2_captureparm capture; + struct v4l2_outputparm output; + __u8 raw_data[200]; /* user-defined */ + } parm; +}; + +/* + * A D V A N C E D D E B U G G I N G + * + * NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS! + * FOR DEBUGGING, TESTING AND INTERNAL USE ONLY! + */ + +/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */ + +#define V4L2_CHIP_MATCH_HOST 0 /* Match against chip ID on host (0 for the host) */ +#define V4L2_CHIP_MATCH_I2C_DRIVER 1 /* Match against I2C driver name */ +#define V4L2_CHIP_MATCH_I2C_ADDR 2 /* Match against I2C 7-bit address */ +#define V4L2_CHIP_MATCH_AC97 3 /* Match against anciliary AC97 chip */ + +struct v4l2_dbg_match { + __u32 type; /* Match type */ + union { /* Match this chip, meaning determined by type */ + __u32 addr; + char name[32]; + }; +} __attribute__ ((packed)); + +struct v4l2_dbg_register { + struct v4l2_dbg_match match; + __u32 size; /* register size in bytes */ + __u64 reg; + __u64 val; +} __attribute__ ((packed)); + +/* VIDIOC_DBG_G_CHIP_IDENT */ +struct v4l2_dbg_chip_ident { + struct v4l2_dbg_match match; + __u32 ident; /* chip identifier as specified in <media/v4l2-chip-ident.h> */ + __u32 revision; /* chip revision, chip specific */ +} __attribute__ ((packed)); + +/* + * I O C T L C O D E S F O R V I D E O D E V I C E S + * + */ +#define VIDIOC_QUERYCAP _IOR('V', 0, struct v4l2_capability) +#define VIDIOC_RESERVED _IO('V', 1) +#define VIDIOC_ENUM_FMT _IOWR('V', 2, struct v4l2_fmtdesc) +#define VIDIOC_G_FMT _IOWR('V', 4, struct v4l2_format) +#define VIDIOC_S_FMT _IOWR('V', 5, struct v4l2_format) +#define VIDIOC_REQBUFS _IOWR('V', 8, struct v4l2_requestbuffers) +#define VIDIOC_QUERYBUF _IOWR('V', 9, struct v4l2_buffer) +#define VIDIOC_G_FBUF _IOR('V', 10, struct v4l2_framebuffer) +#define VIDIOC_S_FBUF _IOW('V', 11, struct v4l2_framebuffer) +#define VIDIOC_OVERLAY _IOW('V', 14, int) +#define VIDIOC_QBUF _IOWR('V', 15, struct v4l2_buffer) +#define VIDIOC_DQBUF _IOWR('V', 17, struct v4l2_buffer) +#define VIDIOC_STREAMON _IOW('V', 18, int) +#define VIDIOC_STREAMOFF _IOW('V', 19, int) +#define VIDIOC_G_PARM _IOWR('V', 21, struct v4l2_streamparm) +#define VIDIOC_S_PARM _IOWR('V', 22, struct v4l2_streamparm) +#define VIDIOC_G_STD _IOR('V', 23, v4l2_std_id) +#define VIDIOC_S_STD _IOW('V', 24, v4l2_std_id) +#define VIDIOC_ENUMSTD _IOWR('V', 25, struct v4l2_standard) +#define VIDIOC_ENUMINPUT _IOWR('V', 26, struct v4l2_input) +#define VIDIOC_G_CTRL _IOWR('V', 27, struct v4l2_control) +#define VIDIOC_S_CTRL _IOWR('V', 28, struct v4l2_control) +#define VIDIOC_G_TUNER _IOWR('V', 29, struct v4l2_tuner) +#define VIDIOC_S_TUNER _IOW('V', 30, struct v4l2_tuner) +#define VIDIOC_G_AUDIO _IOR('V', 33, struct v4l2_audio) +#define VIDIOC_S_AUDIO _IOW('V', 34, struct v4l2_audio) +#define VIDIOC_QUERYCTRL _IOWR('V', 36, struct v4l2_queryctrl) +#define VIDIOC_QUERYMENU _IOWR('V', 37, struct v4l2_querymenu) +#define VIDIOC_G_INPUT _IOR('V', 38, int) +#define VIDIOC_S_INPUT _IOWR('V', 39, int) +#define VIDIOC_G_OUTPUT _IOR('V', 46, int) +#define VIDIOC_S_OUTPUT _IOWR('V', 47, int) +#define VIDIOC_ENUMOUTPUT _IOWR('V', 48, struct v4l2_output) +#define VIDIOC_G_AUDOUT _IOR('V', 49, struct v4l2_audioout) +#define VIDIOC_S_AUDOUT _IOW('V', 50, struct v4l2_audioout) +#define VIDIOC_G_MODULATOR _IOWR('V', 54, struct v4l2_modulator) +#define VIDIOC_S_MODULATOR _IOW('V', 55, struct v4l2_modulator) +#define VIDIOC_G_FREQUENCY _IOWR('V', 56, struct v4l2_frequency) +#define VIDIOC_S_FREQUENCY _IOW('V', 57, struct v4l2_frequency) +#define VIDIOC_CROPCAP _IOWR('V', 58, struct v4l2_cropcap) +#define VIDIOC_G_CROP _IOWR('V', 59, struct v4l2_crop) +#define VIDIOC_S_CROP _IOW('V', 60, struct v4l2_crop) +#define VIDIOC_G_JPEGCOMP _IOR('V', 61, struct v4l2_jpegcompression) +#define VIDIOC_S_JPEGCOMP _IOW('V', 62, struct v4l2_jpegcompression) +#define VIDIOC_QUERYSTD _IOR('V', 63, v4l2_std_id) +#define VIDIOC_TRY_FMT _IOWR('V', 64, struct v4l2_format) +#define VIDIOC_ENUMAUDIO _IOWR('V', 65, struct v4l2_audio) +#define VIDIOC_ENUMAUDOUT _IOWR('V', 66, struct v4l2_audioout) +#define VIDIOC_G_PRIORITY _IOR('V', 67, enum v4l2_priority) +#define VIDIOC_S_PRIORITY _IOW('V', 68, enum v4l2_priority) +#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap) +#define VIDIOC_LOG_STATUS _IO('V', 70) +#define VIDIOC_G_EXT_CTRLS _IOWR('V', 71, struct v4l2_ext_controls) +#define VIDIOC_S_EXT_CTRLS _IOWR('V', 72, struct v4l2_ext_controls) +#define VIDIOC_TRY_EXT_CTRLS _IOWR('V', 73, struct v4l2_ext_controls) +#if 1 /*KEEP*/ +#define VIDIOC_ENUM_FRAMESIZES _IOWR('V', 74, struct v4l2_frmsizeenum) +#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum) +#define VIDIOC_G_ENC_INDEX _IOR('V', 76, struct v4l2_enc_idx) +#define VIDIOC_ENCODER_CMD _IOWR('V', 77, struct v4l2_encoder_cmd) +#define VIDIOC_TRY_ENCODER_CMD _IOWR('V', 78, struct v4l2_encoder_cmd) +#endif + +#if 1 /*KEEP*/ +/* Experimental, meant for debugging, testing and internal use. + Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined. + You must be root to use these ioctls. Never use these in applications! */ +#define VIDIOC_DBG_S_REGISTER _IOW('V', 79, struct v4l2_dbg_register) +#define VIDIOC_DBG_G_REGISTER _IOWR('V', 80, struct v4l2_dbg_register) + +/* Experimental, meant for debugging, testing and internal use. + Never use this ioctl in applications! */ +#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident) +#endif + +#define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct v4l2_hw_freq_seek) +/* Reminder: when adding new ioctls please add support for them to + drivers/media/video/v4l2-compat-ioctl32.c as well! */ + +#ifdef __OLD_VIDIOC_ +/* for compatibility, will go away some day */ +#define VIDIOC_OVERLAY_OLD _IOWR('V', 14, int) +#define VIDIOC_S_PARM_OLD _IOW('V', 22, struct v4l2_streamparm) +#define VIDIOC_S_CTRL_OLD _IOW('V', 28, struct v4l2_control) +#define VIDIOC_G_AUDIO_OLD _IOWR('V', 33, struct v4l2_audio) +#define VIDIOC_G_AUDOUT_OLD _IOWR('V', 49, struct v4l2_audioout) +#define VIDIOC_CROPCAP_OLD _IOR('V', 58, struct v4l2_cropcap) +#endif + +#define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */ + +#endif /* __LINUX_VIDEODEV2_H */ + diff --git a/Documentation/DocBook/v4l/vidioc-cropcap.xml b/Documentation/DocBook/v4l/vidioc-cropcap.xml new file mode 100644 index 00000000000..816e90e283c --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-cropcap.xml @@ -0,0 +1,174 @@ + + + ioctl VIDIOC_CROPCAP + &manvol; + + + + VIDIOC_CROPCAP + Information about the video cropping and scaling abilities + + + + + + int ioctl + int fd + int request + struct v4l2_cropcap +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_CROPCAP + + + + argp + + + + + + + + + Description + + Applications use this function to query the cropping +limits, the pixel aspect of images and to calculate scale factors. +They set the type field of a v4l2_cropcap +structure to the respective buffer (stream) type and call the +VIDIOC_CROPCAP ioctl with a pointer to this +structure. Drivers fill the rest of the structure. The results are +constant except when switching the video standard. Remember this +switch can occur implicit when switching the video input or +output. + + + struct <structname>v4l2_cropcap</structname> + + &cs-str; + + + &v4l2-buf-type; + type + Type of the data stream, set by the application. +Only these types are valid here: +V4L2_BUF_TYPE_VIDEO_CAPTURE, +V4L2_BUF_TYPE_VIDEO_OUTPUT, +V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver +defined) types with code V4L2_BUF_TYPE_PRIVATE +and higher. + + + struct v4l2_rect + bounds + Defines the window within capturing or output is +possible, this may exclude for example the horizontal and vertical +blanking areas. The cropping rectangle cannot exceed these limits. +Width and height are defined in pixels, the driver writer is free to +choose origin and units of the coordinate system in the analog +domain. + + + struct v4l2_rect + defrect + Default cropping rectangle, it shall cover the +"whole picture". Assuming pixel aspect 1/1 this could be for example a +640 × 480 rectangle for NTSC, a +768 × 576 rectangle for PAL and SECAM centered over +the active picture area. The same co-ordinate system as for + bounds is used. + + + &v4l2-fract; + pixelaspect + This is the pixel aspect (y / x) when no +scaling is applied, the ratio of the actual sampling +frequency and the frequency required to get square +pixels.When cropping coordinates refer to square pixels, +the driver sets pixelaspect to 1/1. Other +common values are 54/59 for PAL and SECAM, 11/10 for NTSC sampled +according to []. + + + +
+ + + + + struct <structname>v4l2_rect</structname> + + &cs-str; + + + __s32 + left + Horizontal offset of the top, left corner of the +rectangle, in pixels. + + + __s32 + top + Vertical offset of the top, left corner of the +rectangle, in pixels. + + + __s32 + width + Width of the rectangle, in pixels. + + + __s32 + height + Height of the rectangle, in pixels. Width +and height cannot be negative, the fields are signed for +hysterical reasons. + + + + +
+ + + + &return-value; + + + + EINVAL + + The &v4l2-cropcap; type is +invalid or the ioctl is not supported. This is not permitted for +video capture, output and overlay devices, which must support +VIDIOC_CROPCAP. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-dbg-g-chip-ident.xml b/Documentation/DocBook/v4l/vidioc-dbg-g-chip-ident.xml new file mode 100644 index 00000000000..4a09e203af0 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-dbg-g-chip-ident.xml @@ -0,0 +1,275 @@ + + + ioctl VIDIOC_DBG_G_CHIP_IDENT + &manvol; + + + + VIDIOC_DBG_G_CHIP_IDENT + Identify the chips on a TV card + + + + + + int ioctl + int fd + int request + struct v4l2_dbg_chip_ident +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_DBG_G_CHIP_IDENT + + + + argp + + + + + + + + + Description + + + Experimental + + This is an experimental interface and may change in +the future. + + + For driver debugging purposes this ioctl allows test +applications to query the driver about the chips present on the TV +card. Regular applications must not use it. When you found a chip +specific bug, please contact the linux-media mailing list (&v4l-ml;) +so it can be fixed. + + To query the driver applications must initialize the +match.type and +match.addr or match.name +fields of a &v4l2-dbg-chip-ident; +and call VIDIOC_DBG_G_CHIP_IDENT with a pointer to +this structure. On success the driver stores information about the +selected chip in the ident and +revision fields. On failure the structure +remains unchanged. + + When match.type is +V4L2_CHIP_MATCH_HOST, +match.addr selects the nth non-&i2c; chip +on the TV card. You can enumerate all chips by starting at zero and +incrementing match.addr by one until +VIDIOC_DBG_G_CHIP_IDENT fails with an &EINVAL;. +The number zero always selects the host chip, ⪚ the chip connected +to the PCI or USB bus. + + When match.type is +V4L2_CHIP_MATCH_I2C_DRIVER, +match.name contains the I2C driver name. +For instance +"saa7127" will match any chip +supported by the saa7127 driver, regardless of its &i2c; bus address. +When multiple chips supported by the same driver are present, the +ioctl will return V4L2_IDENT_AMBIGUOUS in the +ident field. + + When match.type is +V4L2_CHIP_MATCH_I2C_ADDR, +match.addr selects a chip by its 7 bit +&i2c; bus address. + + When match.type is +V4L2_CHIP_MATCH_AC97, +match.addr selects the nth AC97 chip +on the TV card. You can enumerate all chips by starting at zero and +incrementing match.addr by one until +VIDIOC_DBG_G_CHIP_IDENT fails with an &EINVAL;. + + On success, the ident field will +contain a chip ID from the Linux +media/v4l2-chip-ident.h header file, and the +revision field will contain a driver +specific value, or zero if no particular revision is associated with +this chip. + + When the driver could not identify the selected chip, +ident will contain +V4L2_IDENT_UNKNOWN. When no chip matched +the ioctl will succeed but the +ident field will contain +V4L2_IDENT_NONE. If multiple chips matched, +ident will contain +V4L2_IDENT_AMBIGUOUS. In all these cases the +revision field remains unchanged. + + This ioctl is optional, not all drivers may support it. It +was introduced in Linux 2.6.21, but the API was changed to the +one described here in 2.6.29. + + We recommended the v4l2-dbg +utility over calling this ioctl directly. It is available from the +LinuxTV v4l-dvb repository; see http://linuxtv.org/repo/ for +access instructions. + + + + struct <structname>v4l2_dbg_match</structname> + + &cs-ustr; + + + __u32 + type + See for a list of +possible types. + + + union + (anonymous) + + + + __u32 + addr + Match a chip by this number, interpreted according +to the type field. + + + + char + name[32] + Match a chip by this name, interpreted according +to the type field. + + + +
+ + + struct <structname>v4l2_dbg_chip_ident</structname> + + &cs-str; + + + struct v4l2_dbg_match + match + How to match the chip, see . + + + __u32 + ident + A chip identifier as defined in the Linux +media/v4l2-chip-ident.h header file, or one of +the values from . + + + __u32 + revision + A chip revision, chip and driver specific. + + + +
+ + + + Chip Match Types + + &cs-def; + + + V4L2_CHIP_MATCH_HOST + 0 + Match the nth chip on the card, zero for the + host chip. Does not match &i2c; chips. + + + V4L2_CHIP_MATCH_I2C_DRIVER + 1 + Match an &i2c; chip by its driver name. + + + V4L2_CHIP_MATCH_I2C_ADDR + 2 + Match a chip by its 7 bit &i2c; bus address. + + + V4L2_CHIP_MATCH_AC97 + 3 + Match the nth anciliary AC97 chip. + + + +
+ + + + Chip Identifiers + + &cs-def; + + + V4L2_IDENT_NONE + 0 + No chip matched. + + + V4L2_IDENT_AMBIGUOUS + 1 + Multiple chips matched. + + + V4L2_IDENT_UNKNOWN + 2 + A chip is present at this address, but the driver +could not identify it. + + + +
+ + + + &return-value; + + + + EINVAL + + The driver does not support this ioctl, or the +match_type is invalid. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-dbg-g-register.xml b/Documentation/DocBook/v4l/vidioc-dbg-g-register.xml new file mode 100644 index 00000000000..980c7f3e2fd --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-dbg-g-register.xml @@ -0,0 +1,275 @@ + + + ioctl VIDIOC_DBG_G_REGISTER, VIDIOC_DBG_S_REGISTER + &manvol; + + + + VIDIOC_DBG_G_REGISTER + VIDIOC_DBG_S_REGISTER + Read or write hardware registers + + + + + + int ioctl + int fd + int request + struct v4l2_dbg_register *argp + + + + + int ioctl + int fd + int request + const struct v4l2_dbg_register +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_DBG_G_REGISTER, VIDIOC_DBG_S_REGISTER + + + + argp + + + + + + + + + Description + + + Experimental + + This is an experimental +interface and may change in the future. + + + For driver debugging purposes these ioctls allow test +applications to access hardware registers directly. Regular +applications must not use them. + + Since writing or even reading registers can jeopardize the +system security, its stability and damage the hardware, both ioctls +require superuser privileges. Additionally the Linux kernel must be +compiled with the CONFIG_VIDEO_ADV_DEBUG option +to enable these ioctls. + + To write a register applications must initialize all fields +of a &v4l2-dbg-register; and call +VIDIOC_DBG_S_REGISTER with a pointer to this +structure. The match.type and +match.addr or match.name +fields select a chip on the TV +card, the reg field specifies a register +number and the val field the value to be +written into the register. + + To read a register applications must initialize the +match.type, +match.chip or match.name and +reg fields, and call +VIDIOC_DBG_G_REGISTER with a pointer to this +structure. On success the driver stores the register value in the +val field. On failure the structure remains +unchanged. + + When match.type is +V4L2_CHIP_MATCH_HOST, +match.addr selects the nth non-&i2c; chip +on the TV card. The number zero always selects the host chip, ⪚ the +chip connected to the PCI or USB bus. You can find out which chips are +present with the &VIDIOC-DBG-G-CHIP-IDENT; ioctl. + + When match.type is +V4L2_CHIP_MATCH_I2C_DRIVER, +match.name contains the I2C driver name. +For instance +"saa7127" will match any chip +supported by the saa7127 driver, regardless of its &i2c; bus address. +When multiple chips supported by the same driver are present, the +effect of these ioctls is undefined. Again with the +&VIDIOC-DBG-G-CHIP-IDENT; ioctl you can find out which &i2c; chips are +present. + + When match.type is +V4L2_CHIP_MATCH_I2C_ADDR, +match.addr selects a chip by its 7 bit &i2c; +bus address. + + When match.type is +V4L2_CHIP_MATCH_AC97, +match.addr selects the nth AC97 chip +on the TV card. + + + Success not guaranteed + + Due to a flaw in the Linux &i2c; bus driver these ioctls may +return successfully without actually reading or writing a register. To +catch the most likely failure we recommend a &VIDIOC-DBG-G-CHIP-IDENT; +call confirming the presence of the selected &i2c; chip. + + + These ioctls are optional, not all drivers may support them. +However when a driver supports these ioctls it must also support +&VIDIOC-DBG-G-CHIP-IDENT;. Conversely it may support +VIDIOC_DBG_G_CHIP_IDENT but not these ioctls. + + VIDIOC_DBG_G_REGISTER and +VIDIOC_DBG_S_REGISTER were introduced in Linux +2.6.21, but their API was changed to the one described here in kernel 2.6.29. + + We recommended the v4l2-dbg +utility over calling these ioctls directly. It is available from the +LinuxTV v4l-dvb repository; see http://linuxtv.org/repo/ for +access instructions. + + + + struct <structname>v4l2_dbg_match</structname> + + &cs-ustr; + + + __u32 + type + See for a list of +possible types. + + + union + (anonymous) + + + + __u32 + addr + Match a chip by this number, interpreted according +to the type field. + + + + char + name[32] + Match a chip by this name, interpreted according +to the type field. + + + +
+ + + + struct <structname>v4l2_dbg_register</structname> + + + + + + + struct v4l2_dbg_match + match + How to match the chip, see . + + + __u64 + reg + A register number. + + + __u64 + val + The value read from, or to be written into the +register. + + + +
+ + + + Chip Match Types + + &cs-def; + + + V4L2_CHIP_MATCH_HOST + 0 + Match the nth chip on the card, zero for the + host chip. Does not match &i2c; chips. + + + V4L2_CHIP_MATCH_I2C_DRIVER + 1 + Match an &i2c; chip by its driver name. + + + V4L2_CHIP_MATCH_I2C_ADDR + 2 + Match a chip by its 7 bit &i2c; bus address. + + + V4L2_CHIP_MATCH_AC97 + 3 + Match the nth anciliary AC97 chip. + + + +
+ + + + &return-value; + + + + EINVAL + + The driver does not support this ioctl, or the kernel +was not compiled with the CONFIG_VIDEO_ADV_DEBUG +option, or the match_type is invalid, or the +selected chip or register does not exist. + + + + EPERM + + Insufficient permissions. Root privileges are required +to execute these ioctls. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-encoder-cmd.xml b/Documentation/DocBook/v4l/vidioc-encoder-cmd.xml new file mode 100644 index 00000000000..b0dde943825 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-encoder-cmd.xml @@ -0,0 +1,204 @@ + + + ioctl VIDIOC_ENCODER_CMD, VIDIOC_TRY_ENCODER_CMD + &manvol; + + + + VIDIOC_ENCODER_CMD + VIDIOC_TRY_ENCODER_CMD + Execute an encoder command + + + + + + int ioctl + int fd + int request + struct v4l2_encoder_cmd *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_ENCODER_CMD, VIDIOC_TRY_ENCODER_CMD + + + + argp + + + + + + + + + Description + + + Experimental + + This is an experimental +interface and may change in the future. + + + These ioctls control an audio/video (usually MPEG-) encoder. +VIDIOC_ENCODER_CMD sends a command to the +encoder, VIDIOC_TRY_ENCODER_CMD can be used to +try a command without actually executing it. + + To send a command applications must initialize all fields of a + &v4l2-encoder-cmd; and call + VIDIOC_ENCODER_CMD or + VIDIOC_TRY_ENCODER_CMD with a pointer to this + structure. + + The cmd field must contain the +command code. The flags field is currently +only used by the STOP command and contains one bit: If the +V4L2_ENC_CMD_STOP_AT_GOP_END flag is set, +encoding will continue until the end of the current Group +Of Pictures, otherwise it will stop immediately. + + A read() call sends a START command to +the encoder if it has not been started yet. After a STOP command, +read() calls will read the remaining data +buffered by the driver. When the buffer is empty, +read() will return zero and the next +read() call will restart the encoder. + + A close() call sends an immediate STOP +to the encoder, and all buffered data is discarded. + + These ioctls are optional, not all drivers may support +them. They were introduced in Linux 2.6.21. + + + struct <structname>v4l2_encoder_cmd</structname> + + &cs-str; + + + __u32 + cmd + The encoder command, see . + + + __u32 + flags + Flags to go with the command, see . If no flags are defined for +this command, drivers and applications must set this field to +zero. + + + __u32 + data[8] + Reserved for future extensions. Drivers and +applications must set the array to zero. + + + +
+ + + Encoder Commands + + &cs-def; + + + V4L2_ENC_CMD_START + 0 + Start the encoder. When the encoder is already +running or paused, this command does nothing. No flags are defined for +this command. + + + V4L2_ENC_CMD_STOP + 1 + Stop the encoder. When the +V4L2_ENC_CMD_STOP_AT_GOP_END flag is set, +encoding will continue until the end of the current Group +Of Pictures, otherwise encoding will stop immediately. +When the encoder is already stopped, this command does +nothing. + + + V4L2_ENC_CMD_PAUSE + 2 + Pause the encoder. When the encoder has not been +started yet, the driver will return an &EPERM;. When the encoder is +already paused, this command does nothing. No flags are defined for +this command. + + + V4L2_ENC_CMD_RESUME + 3 + Resume encoding after a PAUSE command. When the +encoder has not been started yet, the driver will return an &EPERM;. +When the encoder is already running, this command does nothing. No +flags are defined for this command. + + + +
+ + + Encoder Command Flags + + &cs-def; + + + V4L2_ENC_CMD_STOP_AT_GOP_END + 0x0001 + Stop encoding at the end of the current Group Of +Pictures, rather than immediately. + + + +
+ + + + &return-value; + + + + EINVAL + + The driver does not support this ioctl, or the +cmd field is invalid. + + + + EPERM + + The application sent a PAUSE or RESUME command when +the encoder was not running. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-enum-fmt.xml b/Documentation/DocBook/v4l/vidioc-enum-fmt.xml new file mode 100644 index 00000000000..960d44615ca --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-enum-fmt.xml @@ -0,0 +1,164 @@ + + + ioctl VIDIOC_ENUM_FMT + &manvol; + + + + VIDIOC_ENUM_FMT + Enumerate image formats + + + + + + int ioctl + int fd + int request + struct v4l2_fmtdesc +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_ENUM_FMT + + + + argp + + + + + + + + + Description + + To enumerate image formats applications initialize the +type and index +field of &v4l2-fmtdesc; and call the +VIDIOC_ENUM_FMT ioctl with a pointer to this +structure. Drivers fill the rest of the structure or return an +&EINVAL;. All formats are enumerable by beginning at index zero and +incrementing by one until EINVAL is +returned. + + + struct <structname>v4l2_fmtdesc</structname> + + &cs-str; + + + __u32 + index + Number of the format in the enumeration, set by +the application. This is in no way related to the +pixelformat field. + + + &v4l2-buf-type; + type + Type of the data stream, set by the application. +Only these types are valid here: +V4L2_BUF_TYPE_VIDEO_CAPTURE, +V4L2_BUF_TYPE_VIDEO_OUTPUT, +V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver +defined) types with code V4L2_BUF_TYPE_PRIVATE +and higher. + + + __u32 + flags + See + + + __u8 + description[32] + Description of the format, a NUL-terminated ASCII +string. This information is intended for the user, for example: "YUV +4:2:2". + + + __u32 + pixelformat + The image format identifier. This is a +four character code as computed by the v4l2_fourcc() +macro: + + + +#define v4l2_fourcc(a,b,c,d) (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24)) +Several image formats are already +defined by this specification in . Note these +codes are not the same as those used in the Windows world. + + + __u32 + reserved[4] + Reserved for future extensions. Drivers must set +the array to zero. + + + +
+ + + Image Format Description Flags + + &cs-def; + + + V4L2_FMT_FLAG_COMPRESSED + 0x0001 + This is a compressed format. + + + V4L2_FMT_FLAG_EMULATED + 0x0002 + This format is not native to the device but emulated +through software (usually libv4l2), where possible try to use a native format +instead for better performance. + + + +
+ + + + &return-value; + + + + EINVAL + + The &v4l2-fmtdesc; type +is not supported or the index is out of +bounds. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-enum-frameintervals.xml b/Documentation/DocBook/v4l/vidioc-enum-frameintervals.xml new file mode 100644 index 00000000000..3c216e113a5 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-enum-frameintervals.xml @@ -0,0 +1,270 @@ + + + + ioctl VIDIOC_ENUM_FRAMEINTERVALS + &manvol; + + + + VIDIOC_ENUM_FRAMEINTERVALS + Enumerate frame intervals + + + + + + int ioctl + int fd + int request + struct v4l2_frmivalenum *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_ENUM_FRAMEINTERVALS + + + + argp + + Pointer to a &v4l2-frmivalenum; structure that +contains a pixel format and size and receives a frame interval. + + + + + + + Description + + This ioctl allows applications to enumerate all frame +intervals that the device supports for the given pixel format and +frame size. + The supported pixel formats and frame sizes can be obtained +by using the &VIDIOC-ENUM-FMT; and &VIDIOC-ENUM-FRAMESIZES; +functions. + The return value and the content of the +v4l2_frmivalenum.type field depend on the +type of frame intervals the device supports. Here are the semantics of +the function for the different cases: + + + Discrete: The function +returns success if the given index value (zero-based) is valid. The +application should increase the index by one for each call until +EINVAL is returned. The `v4l2_frmivalenum.type` +field is set to `V4L2_FRMIVAL_TYPE_DISCRETE` by the driver. Of the +union only the `discrete` member is valid. + + + Step-wise: The function +returns success if the given index value is zero and +EINVAL for any other index value. The +v4l2_frmivalenum.type field is set to +V4L2_FRMIVAL_TYPE_STEPWISE by the driver. Of the +union only the stepwise member is +valid. + + + Continuous: This is a +special case of the step-wise type above. The function returns success +if the given index value is zero and EINVAL for +any other index value. The +v4l2_frmivalenum.type field is set to +V4L2_FRMIVAL_TYPE_CONTINUOUS by the driver. Of +the union only the stepwise member is valid +and the step value is set to 1. + + + + When the application calls the function with index zero, it +must check the type field to determine the +type of frame interval enumeration the device supports. Only for the +V4L2_FRMIVAL_TYPE_DISCRETE type does it make +sense to increase the index value to receive more frame +intervals. + Note that the order in which the frame intervals are +returned has no special meaning. In particular does it not say +anything about potential default frame intervals. + Applications can assume that the enumeration data does not +change without any interaction from the application itself. This means +that the enumeration data is consistent if the application does not +perform any other ioctl calls while it runs the frame interval +enumeration. + + + + Notes + + + + Frame intervals and frame +rates: The V4L2 API uses frame intervals instead of frame +rates. Given the frame interval the frame rate can be computed as +follows:frame_rate = 1 / frame_interval + + + + + + + Structs + + In the structs below, IN denotes a +value that has to be filled in by the application, +OUT denotes values that the driver fills in. The +application should zero out all members except for the +IN fields. + + + struct <structname>v4l2_frmival_stepwise</structname> + + &cs-str; + + + &v4l2-fract; + min + Minimum frame interval [s]. + + + &v4l2-fract; + max + Maximum frame interval [s]. + + + &v4l2-fract; + step + Frame interval step size [s]. + + + +
+ + + struct <structname>v4l2_frmivalenum</structname> + + + + + + + + __u32 + index + + IN: Index of the given frame interval in the +enumeration. + + + __u32 + pixel_format + + IN: Pixel format for which the frame intervals are +enumerated. + + + __u32 + width + + IN: Frame width for which the frame intervals are +enumerated. + + + __u32 + height + + IN: Frame height for which the frame intervals are +enumerated. + + + __u32 + type + + OUT: Frame interval type the device supports. + + + union + + + OUT: Frame interval with the given index. + + + + &v4l2-fract; + discrete + Frame interval [s]. + + + + &v4l2-frmival-stepwise; + stepwise + + + + __u32 + reserved[2] + + Reserved space for future use. + + + +
+ + + + Enums + + + enum <structname>v4l2_frmivaltypes</structname> + + &cs-def; + + + V4L2_FRMIVAL_TYPE_DISCRETE + 1 + Discrete frame interval. + + + V4L2_FRMIVAL_TYPE_CONTINUOUS + 2 + Continuous frame interval. + + + V4L2_FRMIVAL_TYPE_STEPWISE + 3 + Step-wise defined frame interval. + + + +
+ + + + &return-value; + + See the description section above for a list of return +values that errno can have. + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-enum-framesizes.xml b/Documentation/DocBook/v4l/vidioc-enum-framesizes.xml new file mode 100644 index 00000000000..6afa4542c81 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-enum-framesizes.xml @@ -0,0 +1,282 @@ + + + + ioctl VIDIOC_ENUM_FRAMESIZES + &manvol; + + + + VIDIOC_ENUM_FRAMESIZES + Enumerate frame sizes + + + + + + int ioctl + int fd + int request + struct v4l2_frmsizeenum *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_ENUM_FRAMESIZES + + + + argp + + Pointer to a &v4l2-frmsizeenum; that contains an index +and pixel format and receives a frame width and height. + + + + + + + Description + + + Experimental + + This is an experimental +interface and may change in the future. + + + This ioctl allows applications to enumerate all frame sizes +(&ie; width and height in pixels) that the device supports for the +given pixel format. + The supported pixel formats can be obtained by using the +&VIDIOC-ENUM-FMT; function. + The return value and the content of the +v4l2_frmsizeenum.type field depend on the +type of frame sizes the device supports. Here are the semantics of the +function for the different cases: + + + + Discrete: The function +returns success if the given index value (zero-based) is valid. The +application should increase the index by one for each call until +EINVAL is returned. The +v4l2_frmsizeenum.type field is set to +V4L2_FRMSIZE_TYPE_DISCRETE by the driver. Of the +union only the discrete member is +valid. + + + Step-wise: The function +returns success if the given index value is zero and +EINVAL for any other index value. The +v4l2_frmsizeenum.type field is set to +V4L2_FRMSIZE_TYPE_STEPWISE by the driver. Of the +union only the stepwise member is +valid. + + + Continuous: This is a +special case of the step-wise type above. The function returns success +if the given index value is zero and EINVAL for +any other index value. The +v4l2_frmsizeenum.type field is set to +V4L2_FRMSIZE_TYPE_CONTINUOUS by the driver. Of +the union only the stepwise member is valid +and the step_width and +step_height values are set to 1. + + + + When the application calls the function with index zero, it +must check the type field to determine the +type of frame size enumeration the device supports. Only for the +V4L2_FRMSIZE_TYPE_DISCRETE type does it make +sense to increase the index value to receive more frame sizes. + Note that the order in which the frame sizes are returned +has no special meaning. In particular does it not say anything about +potential default format sizes. + Applications can assume that the enumeration data does not +change without any interaction from the application itself. This means +that the enumeration data is consistent if the application does not +perform any other ioctl calls while it runs the frame size +enumeration. + + + + Structs + + In the structs below, IN denotes a +value that has to be filled in by the application, +OUT denotes values that the driver fills in. The +application should zero out all members except for the +IN fields. + + + struct <structname>v4l2_frmsize_discrete</structname> + + &cs-str; + + + __u32 + width + Width of the frame [pixel]. + + + __u32 + height + Height of the frame [pixel]. + + + +
+ + + struct <structname>v4l2_frmsize_stepwise</structname> + + &cs-str; + + + __u32 + min_width + Minimum frame width [pixel]. + + + __u32 + max_width + Maximum frame width [pixel]. + + + __u32 + step_width + Frame width step size [pixel]. + + + __u32 + min_height + Minimum frame height [pixel]. + + + __u32 + max_height + Maximum frame height [pixel]. + + + __u32 + step_height + Frame height step size [pixel]. + + + +
+ + + struct <structname>v4l2_frmsizeenum</structname> + + + + + + + + __u32 + index + + IN: Index of the given frame size in the enumeration. + + + __u32 + pixel_format + + IN: Pixel format for which the frame sizes are enumerated. + + + __u32 + type + + OUT: Frame size type the device supports. + + + union + + + OUT: Frame size with the given index. + + + + &v4l2-frmsize-discrete; + discrete + + + + + &v4l2-frmsize-stepwise; + stepwise + + + + __u32 + reserved[2] + + Reserved space for future use. + + + +
+ + + + Enums + + + enum <structname>v4l2_frmsizetypes</structname> + + &cs-def; + + + V4L2_FRMSIZE_TYPE_DISCRETE + 1 + Discrete frame size. + + + V4L2_FRMSIZE_TYPE_CONTINUOUS + 2 + Continuous frame size. + + + V4L2_FRMSIZE_TYPE_STEPWISE + 3 + Step-wise defined frame size. + + + +
+ + + + &return-value; + + See the description section above for a list of return +values that errno can have. + + + + diff --git a/Documentation/DocBook/v4l/vidioc-enumaudio.xml b/Documentation/DocBook/v4l/vidioc-enumaudio.xml new file mode 100644 index 00000000000..9ae8f2d3a96 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-enumaudio.xml @@ -0,0 +1,86 @@ + + + ioctl VIDIOC_ENUMAUDIO + &manvol; + + + + VIDIOC_ENUMAUDIO + Enumerate audio inputs + + + + + + int ioctl + int fd + int request + struct v4l2_audio *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_ENUMAUDIO + + + + argp + + + + + + + + + Description + + To query the attributes of an audio input applications +initialize the index field and zero out the +reserved array of a &v4l2-audio; +and call the VIDIOC_ENUMAUDIO ioctl with a pointer +to this structure. Drivers fill the rest of the structure or return an +&EINVAL; when the index is out of bounds. To enumerate all audio +inputs applications shall begin at index zero, incrementing by one +until the driver returns EINVAL. + + See for a description of +&v4l2-audio;. + + + + &return-value; + + + + EINVAL + + The number of the audio input is out of bounds, or +there are no audio inputs at all and this ioctl is not +supported. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-enumaudioout.xml b/Documentation/DocBook/v4l/vidioc-enumaudioout.xml new file mode 100644 index 00000000000..d3d7c0ab17b --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-enumaudioout.xml @@ -0,0 +1,89 @@ + + + ioctl VIDIOC_ENUMAUDOUT + &manvol; + + + + VIDIOC_ENUMAUDOUT + Enumerate audio outputs + + + + + + int ioctl + int fd + int request + struct v4l2_audioout *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_ENUMAUDOUT + + + + argp + + + + + + + + + Description + + To query the attributes of an audio output applications +initialize the index field and zero out the +reserved array of a &v4l2-audioout; and +call the VIDIOC_G_AUDOUT ioctl with a pointer +to this structure. Drivers fill the rest of the structure or return an +&EINVAL; when the index is out of bounds. To enumerate all audio +outputs applications shall begin at index zero, incrementing by one +until the driver returns EINVAL. + + Note connectors on a TV card to loop back the received audio +signal to a sound card are not audio outputs in this sense. + + See for a description of +&v4l2-audioout;. + + + + &return-value; + + + + EINVAL + + The number of the audio output is out of bounds, or +there are no audio outputs at all and this ioctl is not +supported. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-enuminput.xml b/Documentation/DocBook/v4l/vidioc-enuminput.xml new file mode 100644 index 00000000000..414856b8247 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-enuminput.xml @@ -0,0 +1,287 @@ + + + ioctl VIDIOC_ENUMINPUT + &manvol; + + + + VIDIOC_ENUMINPUT + Enumerate video inputs + + + + + + int ioctl + int fd + int request + struct v4l2_input +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_ENUMINPUT + + + + argp + + + + + + + + + Description + + To query the attributes of a video input applications +initialize the index field of &v4l2-input; +and call the VIDIOC_ENUMINPUT ioctl with a +pointer to this structure. Drivers fill the rest of the structure or +return an &EINVAL; when the index is out of bounds. To enumerate all +inputs applications shall begin at index zero, incrementing by one +until the driver returns EINVAL. + + + struct <structname>v4l2_input</structname> + + &cs-str; + + + __u32 + index + Identifies the input, set by the +application. + + + __u8 + name[32] + Name of the video input, a NUL-terminated ASCII +string, for example: "Vin (Composite 2)". This information is intended +for the user, preferably the connector label on the device itself. + + + __u32 + type + Type of the input, see . + + + __u32 + audioset + Drivers can enumerate up to 32 video and +audio inputs. This field shows which audio inputs were selectable as +audio source if this was the currently selected video input. It is a +bit mask. The LSB corresponds to audio input 0, the MSB to input 31. +Any number of bits can be set, or none.When the driver +does not enumerate audio inputs no bits must be set. Applications +shall not interpret this as lack of audio support. Some drivers +automatically select audio sources and do not enumerate them since +there is no choice anyway.For details on audio inputs and +how to select the current input see . + + + __u32 + tuner + Capture devices can have zero or more tuners (RF +demodulators). When the type is set to +V4L2_INPUT_TYPE_TUNER this is an RF connector and +this field identifies the tuner. It corresponds to +&v4l2-tuner; field index. For details on +tuners see . + + + &v4l2-std-id; + std + Every video input supports one or more different +video standards. This field is a set of all supported standards. For +details on video standards and how to switch see . + + + __u32 + status + This field provides status information about the +input. See for flags. +With the exception of the sensor orientation bits status is only valid when this is the +current input. + + + __u32 + reserved[4] + Reserved for future extensions. Drivers must set +the array to zero. + + + +
+ + + Input Types + + &cs-def; + + + V4L2_INPUT_TYPE_TUNER + 1 + This input uses a tuner (RF demodulator). + + + V4L2_INPUT_TYPE_CAMERA + 2 + Analog baseband input, for example CVBS / +Composite Video, S-Video, RGB. + + + +
+ + + + + Input Status Flags + + + + + + + + General + + + V4L2_IN_ST_NO_POWER + 0x00000001 + Attached device is off. + + + V4L2_IN_ST_NO_SIGNAL + 0x00000002 + + + + V4L2_IN_ST_NO_COLOR + 0x00000004 + The hardware supports color decoding, but does not +detect color modulation in the signal. + + + Sensor Orientation + + + V4L2_IN_ST_HFLIP + 0x00000010 + The input is connected to a device that produces a signal +that is flipped horizontally and does not correct this before passing the +signal to userspace. + + + V4L2_IN_ST_VFLIP + 0x00000020 + The input is connected to a device that produces a signal +that is flipped vertically and does not correct this before passing the +signal to userspace. Note that a 180 degree rotation is the same as HFLIP | VFLIP + + + Analog Video + + + V4L2_IN_ST_NO_H_LOCK + 0x00000100 + No horizontal sync lock. + + + V4L2_IN_ST_COLOR_KILL + 0x00000200 + A color killer circuit automatically disables color +decoding when it detects no color modulation. When this flag is set +the color killer is enabled and has shut off +color decoding. + + + Digital Video + + + V4L2_IN_ST_NO_SYNC + 0x00010000 + No synchronization lock. + + + V4L2_IN_ST_NO_EQU + 0x00020000 + No equalizer lock. + + + V4L2_IN_ST_NO_CARRIER + 0x00040000 + Carrier recovery failed. + + + VCR and Set-Top Box + + + V4L2_IN_ST_MACROVISION + 0x01000000 + Macrovision is an analog copy prevention system +mangling the video signal to confuse video recorders. When this +flag is set Macrovision has been detected. + + + V4L2_IN_ST_NO_ACCESS + 0x02000000 + Conditional access denied. + + + V4L2_IN_ST_VTR + 0x04000000 + VTR time constant. [?] + + + +
+ + + + &return-value; + + + + EINVAL + + The &v4l2-input; index is +out of bounds. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/v4l/vidioc-enumoutput.xml new file mode 100644 index 00000000000..e8d16dcd50c --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-enumoutput.xml @@ -0,0 +1,172 @@ + + + ioctl VIDIOC_ENUMOUTPUT + &manvol; + + + + VIDIOC_ENUMOUTPUT + Enumerate video outputs + + + + + + int ioctl + int fd + int request + struct v4l2_output *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_ENUMOUTPUT + + + + argp + + + + + + + + + Description + + To query the attributes of a video outputs applications +initialize the index field of &v4l2-output; +and call the VIDIOC_ENUMOUTPUT ioctl with a +pointer to this structure. Drivers fill the rest of the structure or +return an &EINVAL; when the index is out of bounds. To enumerate all +outputs applications shall begin at index zero, incrementing by one +until the driver returns EINVAL. + + + struct <structname>v4l2_output</structname> + + &cs-str; + + + __u32 + index + Identifies the output, set by the +application. + + + __u8 + name[32] + Name of the video output, a NUL-terminated ASCII +string, for example: "Vout". This information is intended for the +user, preferably the connector label on the device itself. + + + __u32 + type + Type of the output, see . + + + __u32 + audioset + Drivers can enumerate up to 32 video and +audio outputs. This field shows which audio outputs were +selectable as the current output if this was the currently selected +video output. It is a bit mask. The LSB corresponds to audio output 0, +the MSB to output 31. Any number of bits can be set, or +none.When the driver does not enumerate audio outputs no +bits must be set. Applications shall not interpret this as lack of +audio support. Drivers may automatically select audio outputs without +enumerating them.For details on audio outputs and how to +select the current output see . + + + __u32 + modulator + Output devices can have zero or more RF modulators. +When the type is +V4L2_OUTPUT_TYPE_MODULATOR this is an RF +connector and this field identifies the modulator. It corresponds to +&v4l2-modulator; field index. For details +on modulators see . + + + &v4l2-std-id; + std + Every video output supports one or more different +video standards. This field is a set of all supported standards. For +details on video standards and how to switch see . + + + __u32 + reserved[4] + Reserved for future extensions. Drivers must set +the array to zero. + + + +
+ + + Output Type + + &cs-def; + + + V4L2_OUTPUT_TYPE_MODULATOR + 1 + This output is an analog TV modulator. + + + V4L2_OUTPUT_TYPE_ANALOG + 2 + Analog baseband output, for example Composite / +CVBS, S-Video, RGB. + + + V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY + 3 + [?] + + + +
+ + + + &return-value; + + + + EINVAL + + The &v4l2-output; index +is out of bounds. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-enumstd.xml b/Documentation/DocBook/v4l/vidioc-enumstd.xml new file mode 100644 index 00000000000..95803fe2c8e --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-enumstd.xml @@ -0,0 +1,391 @@ + + + ioctl VIDIOC_ENUMSTD + &manvol; + + + + VIDIOC_ENUMSTD + Enumerate supported video standards + + + + + + int ioctl + int fd + int request + struct v4l2_standard *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_ENUMSTD + + + + argp + + + + + + + + + Description + + To query the attributes of a video standard, +especially a custom (driver defined) one, applications initialize the +index field of &v4l2-standard; and call the +VIDIOC_ENUMSTD ioctl with a pointer to this +structure. Drivers fill the rest of the structure or return an +&EINVAL; when the index is out of bounds. To enumerate all standards +applications shall begin at index zero, incrementing by one until the +driver returns EINVAL. Drivers may enumerate a +different set of standards after switching the video input or +output. + The supported standards may overlap and we need an +unambiguous set to find the current standard returned by +VIDIOC_G_STD. + + + + struct <structname>v4l2_standard</structname> + + &cs-str; + + + __u32 + index + Number of the video standard, set by the +application. + + + &v4l2-std-id; + id + The bits in this field identify the standard as +one of the common standards listed in , +or if bits 32 to 63 are set as custom standards. Multiple bits can be +set if the hardware does not distinguish between these standards, +however separate indices do not indicate the opposite. The +id must be unique. No other enumerated +v4l2_standard structure, for this input or +output anyway, can contain the same set of bits. + + + __u8 + name[24] + Name of the standard, a NUL-terminated ASCII +string, for example: "PAL-B/G", "NTSC Japan". This information is +intended for the user. + + + &v4l2-fract; + frameperiod + The frame period (not field period) is numerator +/ denominator. For example M/NTSC has a frame period of 1001 / +30000 seconds. + + + __u32 + framelines + Total lines per frame including blanking, +e. g. 625 for B/PAL. + + + __u32 + reserved[4] + Reserved for future extensions. Drivers must set +the array to zero. + + + +
+ + + struct <structname>v4l2_fract</structname> + + &cs-str; + + + __u32 + numerator + + + + __u32 + denominator + + + + +
+ + + typedef <structname>v4l2_std_id</structname> + + &cs-str; + + + __u64 + v4l2_std_id + This type is a set, each bit representing another +video standard as listed below and in . The 32 most significant bits are reserved +for custom (driver defined) video standards. + + + +
+ + +#define V4L2_STD_PAL_B ((v4l2_std_id)0x00000001) +#define V4L2_STD_PAL_B1 ((v4l2_std_id)0x00000002) +#define V4L2_STD_PAL_G ((v4l2_std_id)0x00000004) +#define V4L2_STD_PAL_H ((v4l2_std_id)0x00000008) +#define V4L2_STD_PAL_I ((v4l2_std_id)0x00000010) +#define V4L2_STD_PAL_D ((v4l2_std_id)0x00000020) +#define V4L2_STD_PAL_D1 ((v4l2_std_id)0x00000040) +#define V4L2_STD_PAL_K ((v4l2_std_id)0x00000080) + +#define V4L2_STD_PAL_M ((v4l2_std_id)0x00000100) +#define V4L2_STD_PAL_N ((v4l2_std_id)0x00000200) +#define V4L2_STD_PAL_Nc ((v4l2_std_id)0x00000400) +#define V4L2_STD_PAL_60 ((v4l2_std_id)0x00000800) +V4L2_STD_PAL_60 is +a hybrid standard with 525 lines, 60 Hz refresh rate, and PAL color +modulation with a 4.43 MHz color subcarrier. Some PAL video recorders +can play back NTSC tapes in this mode for display on a 50/60 Hz agnostic +PAL TV. +#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) +#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000) +#define V4L2_STD_NTSC_443 ((v4l2_std_id)0x00004000) +V4L2_STD_NTSC_443 +is a hybrid standard with 525 lines, 60 Hz refresh rate, and NTSC +color modulation with a 4.43 MHz color +subcarrier. +#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000) + +#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000) +#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000) +#define V4L2_STD_SECAM_G ((v4l2_std_id)0x00040000) +#define V4L2_STD_SECAM_H ((v4l2_std_id)0x00080000) +#define V4L2_STD_SECAM_K ((v4l2_std_id)0x00100000) +#define V4L2_STD_SECAM_K1 ((v4l2_std_id)0x00200000) +#define V4L2_STD_SECAM_L ((v4l2_std_id)0x00400000) +#define V4L2_STD_SECAM_LC ((v4l2_std_id)0x00800000) + +/* ATSC/HDTV */ +#define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000) +#define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000) +V4L2_STD_ATSC_8_VSB and +V4L2_STD_ATSC_16_VSB are U.S. terrestrial digital +TV standards. Presently the V4L2 API does not support digital TV. See +also the Linux DVB API at http://linuxtv.org. + +#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\ + V4L2_STD_PAL_B1 |\ + V4L2_STD_PAL_G) +#define V4L2_STD_B (V4L2_STD_PAL_B |\ + V4L2_STD_PAL_B1 |\ + V4L2_STD_SECAM_B) +#define V4L2_STD_GH (V4L2_STD_PAL_G |\ + V4L2_STD_PAL_H |\ + V4L2_STD_SECAM_G |\ + V4L2_STD_SECAM_H) +#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\ + V4L2_STD_PAL_D1 |\ + V4L2_STD_PAL_K) +#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\ + V4L2_STD_PAL_DK |\ + V4L2_STD_PAL_H |\ + V4L2_STD_PAL_I) +#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\ + V4L2_STD_NTSC_M_JP |\ + V4L2_STD_NTSC_M_KR) +#define V4L2_STD_MN (V4L2_STD_PAL_M |\ + V4L2_STD_PAL_N |\ + V4L2_STD_PAL_Nc |\ + V4L2_STD_NTSC) +#define V4L2_STD_SECAM_DK (V4L2_STD_SECAM_D |\ + V4L2_STD_SECAM_K |\ + V4L2_STD_SECAM_K1) +#define V4L2_STD_DK (V4L2_STD_PAL_DK |\ + V4L2_STD_SECAM_DK) + +#define V4L2_STD_SECAM (V4L2_STD_SECAM_B |\ + V4L2_STD_SECAM_G |\ + V4L2_STD_SECAM_H |\ + V4L2_STD_SECAM_DK |\ + V4L2_STD_SECAM_L |\ + V4L2_STD_SECAM_LC) + +#define V4L2_STD_525_60 (V4L2_STD_PAL_M |\ + V4L2_STD_PAL_60 |\ + V4L2_STD_NTSC |\ + V4L2_STD_NTSC_443) +#define V4L2_STD_625_50 (V4L2_STD_PAL |\ + V4L2_STD_PAL_N |\ + V4L2_STD_PAL_Nc |\ + V4L2_STD_SECAM) + +#define V4L2_STD_UNKNOWN 0 +#define V4L2_STD_ALL (V4L2_STD_525_60 |\ + V4L2_STD_625_50) + + + + Video Standards (based on [<xref linkend="itu470" />]) + + + + + + + + + + + + + + + + Characteristics + M/NTSCJapan uses a standard +similar to M/NTSC +(V4L2_STD_NTSC_M_JP). + M/PAL + N/PAL The values in +brackets apply to the combination N/PAL a.k.a. +NC used in Argentina +(V4L2_STD_PAL_Nc). + B, B1, G/PAL + D, D1, K/PAL + H/PAL + I/PAL + B, G/SECAM + D, K/SECAM + K1/SECAM + L/SECAM + + + + + Frame lines + 525 + 625 + + + Frame period (s) + 1001/30000 + 1/25 + + + Chrominance sub-carrier frequency (Hz) + 3579545 ± 10 + 3579611.49 ± 10 + 4433618.75 ± 5 (3582056.25 +± 5) + 4433618.75 ± 5 + 4433618.75 ± 1 + fOR = +4406250 ± 2000, fOB = 4250000 +± 2000 + + + Nominal radio-frequency channel bandwidth +(MHz) + 6 + 6 + 6 + B: 7; B1, G: 8 + 8 + 8 + 8 + 8 + 8 + 8 + 8 + + + Sound carrier relative to vision carrier +(MHz) + + 4.5 + + 4.5 + + 4.5 + + 5.5 ± 0.001 +In the Federal Republic of Germany, Austria, Italy, +the Netherlands, Slovakia and Switzerland a system of two sound +carriers is used, the frequency of the second carrier being +242.1875 kHz above the frequency of the first sound carrier. For +stereophonic sound transmissions a similar system is used in +Australia. New Zealand uses a sound +carrier displaced 5.4996 ± 0.0005 MHz from the vision +carrier. In Denmark, Finland, New +Zealand, Sweden and Spain a system of two sound carriers is used. In +Iceland, Norway and Poland the same system is being introduced. The +second carrier is 5.85 MHz above the vision carrier and is DQPSK +modulated with 728 kbit/s sound and data multiplex. (NICAM +system) In the United Kingdom, a +system of two sound carriers is used. The second sound carrier is +6.552 MHz above the vision carrier and is DQPSK modulated with a +728 kbit/s sound and data multiplex able to carry two sound +channels. (NICAM system) + + 6.5 ± 0.001 + + 5.5 + + 5.9996 ± 0.0005 + + 5.5 ± 0.001 + + 6.5 ± 0.001 + + 6.5 + + 6.5 In France, a +digital carrier 5.85 MHz away from the vision carrier may be used in +addition to the main sound carrier. It is modulated in differentially +encoded QPSK with a 728 kbit/s sound and data multiplexer capable of +carrying two sound channels. (NICAM +system) + + + +
+ + + + &return-value; + + + + EINVAL + + The &v4l2-standard; index +is out of bounds. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-audio.xml b/Documentation/DocBook/v4l/vidioc-g-audio.xml new file mode 100644 index 00000000000..65361a8c2b0 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-audio.xml @@ -0,0 +1,188 @@ + + + ioctl VIDIOC_G_AUDIO, VIDIOC_S_AUDIO + &manvol; + + + + VIDIOC_G_AUDIO + VIDIOC_S_AUDIO + Query or select the current audio input and its +attributes + + + + + + int ioctl + int fd + int request + struct v4l2_audio *argp + + + + + int ioctl + int fd + int request + const struct v4l2_audio *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_AUDIO, VIDIOC_S_AUDIO + + + + argp + + + + + + + + + Description + + To query the current audio input applications zero out the +reserved array of a &v4l2-audio; +and call the VIDIOC_G_AUDIO ioctl with a pointer +to this structure. Drivers fill the rest of the structure or return an +&EINVAL; when the device has no audio inputs, or none which combine +with the current video input. + + Audio inputs have one writable property, the audio mode. To +select the current audio input and change the +audio mode, applications initialize the +index and mode +fields, and the +reserved array of a +v4l2_audio structure and call the +VIDIOC_S_AUDIO ioctl. Drivers may switch to a +different audio mode if the request cannot be satisfied. However, this +is a write-only ioctl, it does not return the actual new audio +mode. + + + struct <structname>v4l2_audio</structname> + + &cs-str; + + + __u32 + index + Identifies the audio input, set by the +driver or application. + + + __u8 + name[32] + Name of the audio input, a NUL-terminated ASCII +string, for example: "Line In". This information is intended for the +user, preferably the connector label on the device itself. + + + __u32 + capability + Audio capability flags, see . + + + __u32 + mode + Audio mode flags set by drivers and applications (on + VIDIOC_S_AUDIO ioctl), see . + + + __u32 + reserved[2] + Reserved for future extensions. Drivers and +applications must set the array to zero. + + + +
+ + + Audio Capability Flags + + &cs-def; + + + V4L2_AUDCAP_STEREO + 0x00001 + This is a stereo input. The flag is intended to +automatically disable stereo recording etc. when the signal is always +monaural. The API provides no means to detect if stereo is +received, unless the audio input belongs to a +tuner. + + + V4L2_AUDCAP_AVL + 0x00002 + Automatic Volume Level mode is supported. + + + +
+ + + Audio Mode Flags + + &cs-def; + + + V4L2_AUDMODE_AVL + 0x00001 + AVL mode is on. + + + +
+ + + + &return-value; + + + + EINVAL + + No audio inputs combine with the current video input, +or the number of the selected audio input is out of bounds or it does +not combine, or there are no audio inputs at all and the ioctl is not +supported. + + + + EBUSY + + I/O is in progress, the input cannot be +switched. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-audioout.xml b/Documentation/DocBook/v4l/vidioc-g-audioout.xml new file mode 100644 index 00000000000..3632730c5c6 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-audioout.xml @@ -0,0 +1,154 @@ + + + ioctl VIDIOC_G_AUDOUT, VIDIOC_S_AUDOUT + &manvol; + + + + VIDIOC_G_AUDOUT + VIDIOC_S_AUDOUT + Query or select the current audio output + + + + + + int ioctl + int fd + int request + struct v4l2_audioout *argp + + + + + int ioctl + int fd + int request + const struct v4l2_audioout *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_AUDOUT, VIDIOC_S_AUDOUT + + + + argp + + + + + + + + + Description + + To query the current audio output applications zero out the +reserved array of a &v4l2-audioout; and +call the VIDIOC_G_AUDOUT ioctl with a pointer +to this structure. Drivers fill the rest of the structure or return an +&EINVAL; when the device has no audio inputs, or none which combine +with the current video output. + + Audio outputs have no writable properties. Nevertheless, to +select the current audio output applications can initialize the +index field and +reserved array (which in the future may +contain writable properties) of a +v4l2_audioout structure and call the +VIDIOC_S_AUDOUT ioctl. Drivers switch to the +requested output or return the &EINVAL; when the index is out of +bounds. This is a write-only ioctl, it does not return the current +audio output attributes as VIDIOC_G_AUDOUT +does. + + Note connectors on a TV card to loop back the received audio +signal to a sound card are not audio outputs in this sense. + + + struct <structname>v4l2_audioout</structname> + + &cs-str; + + + __u32 + index + Identifies the audio output, set by the +driver or application. + + + __u8 + name[32] + Name of the audio output, a NUL-terminated ASCII +string, for example: "Line Out". This information is intended for the +user, preferably the connector label on the device itself. + + + __u32 + capability + Audio capability flags, none defined yet. Drivers +must set this field to zero. + + + __u32 + mode + Audio mode, none defined yet. Drivers and +applications (on VIDIOC_S_AUDOUT) must set this +field to zero. + + + __u32 + reserved[2] + Reserved for future extensions. Drivers and +applications must set the array to zero. + + + +
+ + + + &return-value; + + + + EINVAL + + No audio outputs combine with the current video +output, or the number of the selected audio output is out of bounds or +it does not combine, or there are no audio outputs at all and the +ioctl is not supported. + + + + EBUSY + + I/O is in progress, the output cannot be +switched. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-crop.xml b/Documentation/DocBook/v4l/vidioc-g-crop.xml new file mode 100644 index 00000000000..d235b1dedbe --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-crop.xml @@ -0,0 +1,143 @@ + + + ioctl VIDIOC_G_CROP, VIDIOC_S_CROP + &manvol; + + + + VIDIOC_G_CROP + VIDIOC_S_CROP + Get or set the current cropping rectangle + + + + + + int ioctl + int fd + int request + struct v4l2_crop *argp + + + + + int ioctl + int fd + int request + const struct v4l2_crop *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_CROP, VIDIOC_S_CROP + + + + argp + + + + + + + + + Description + + To query the cropping rectangle size and position +applications set the type field of a +v4l2_crop structure to the respective buffer +(stream) type and call the VIDIOC_G_CROP ioctl +with a pointer to this structure. The driver fills the rest of the +structure or returns the &EINVAL; if cropping is not supported. + + To change the cropping rectangle applications initialize the +type and &v4l2-rect; substructure named +c of a v4l2_crop structure and call the +VIDIOC_S_CROP ioctl with a pointer to this +structure. + + The driver first adjusts the requested dimensions against +hardware limits, &ie; the bounds given by the capture/output window, +and it rounds to the closest possible values of horizontal and +vertical offset, width and height. In particular the driver must round +the vertical offset of the cropping rectangle to frame lines modulo +two, such that the field order cannot be confused. + + Second the driver adjusts the image size (the opposite +rectangle of the scaling process, source or target depending on the +data direction) to the closest size possible while maintaining the +current horizontal and vertical scaling factor. + + Finally the driver programs the hardware with the actual +cropping and image parameters. VIDIOC_S_CROP is a +write-only ioctl, it does not return the actual parameters. To query +them applications must call VIDIOC_G_CROP and +&VIDIOC-G-FMT;. When the parameters are unsuitable the application may +modify the cropping or image parameters and repeat the cycle until +satisfactory parameters have been negotiated. + + When cropping is not supported then no parameters are +changed and VIDIOC_S_CROP returns the +&EINVAL;. + + + struct <structname>v4l2_crop</structname> + + &cs-str; + + + &v4l2-buf-type; + type + Type of the data stream, set by the application. +Only these types are valid here: V4L2_BUF_TYPE_VIDEO_CAPTURE, +V4L2_BUF_TYPE_VIDEO_OUTPUT, +V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver +defined) types with code V4L2_BUF_TYPE_PRIVATE +and higher. + + + &v4l2-rect; + c + Cropping rectangle. The same co-ordinate system as +for &v4l2-cropcap; bounds is used. + + + +
+ + + + &return-value; + + + + EINVAL + + Cropping is not supported. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-ctrl.xml b/Documentation/DocBook/v4l/vidioc-g-ctrl.xml new file mode 100644 index 00000000000..8b5e6ff7f3d --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-ctrl.xml @@ -0,0 +1,130 @@ + + + ioctl VIDIOC_G_CTRL, VIDIOC_S_CTRL + &manvol; + + + + VIDIOC_G_CTRL + VIDIOC_S_CTRL + Get or set the value of a control + + + + + + int ioctl + int fd + int request + struct v4l2_control +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_CTRL, VIDIOC_S_CTRL + + + + argp + + + + + + + + + Description + + To get the current value of a control applications +initialize the id field of a struct +v4l2_control and call the +VIDIOC_G_CTRL ioctl with a pointer to this +structure. To change the value of a control applications initialize +the id and value +fields of a struct v4l2_control and call the +VIDIOC_S_CTRL ioctl. + + When the id is invalid drivers +return an &EINVAL;. When the value is out +of bounds drivers can choose to take the closest valid value or return +an &ERANGE;, whatever seems more appropriate. However, +VIDIOC_S_CTRL is a write-only ioctl, it does not +return the actual new value. + + These ioctls work only with user controls. For other +control classes the &VIDIOC-G-EXT-CTRLS;, &VIDIOC-S-EXT-CTRLS; or +&VIDIOC-TRY-EXT-CTRLS; must be used. + + + struct <structname>v4l2_control</structname> + + &cs-str; + + + __u32 + id + Identifies the control, set by the +application. + + + __s32 + value + New value or current value. + + + +
+ + + + &return-value; + + + + EINVAL + + The &v4l2-control; id is +invalid. + + + + ERANGE + + The &v4l2-control; value +is out of bounds. + + + + EBUSY + + The control is temporarily not changeable, possibly +because another applications took over control of the device function +this control belongs to. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-enc-index.xml b/Documentation/DocBook/v4l/vidioc-g-enc-index.xml new file mode 100644 index 00000000000..9f242e4b294 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-enc-index.xml @@ -0,0 +1,213 @@ + + + ioctl VIDIOC_G_ENC_INDEX + &manvol; + + + + VIDIOC_G_ENC_INDEX + Get meta data about a compressed video stream + + + + + + int ioctl + int fd + int request + struct v4l2_enc_idx *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_ENC_INDEX + + + + argp + + + + + + + + + Description + + + Experimental + + This is an experimental +interface and may change in the future. + + + The VIDIOC_G_ENC_INDEX ioctl provides +meta data about a compressed video stream the same or another +application currently reads from the driver, which is useful for +random access into the stream without decoding it. + + To read the data applications must call +VIDIOC_G_ENC_INDEX with a pointer to a +&v4l2-enc-idx;. On success the driver fills the +entry array, stores the number of elements +written in the entries field, and +initializes the entries_cap field. + + Each element of the entry array +contains meta data about one picture. A +VIDIOC_G_ENC_INDEX call reads up to +V4L2_ENC_IDX_ENTRIES entries from a driver +buffer, which can hold up to entries_cap +entries. This number can be lower or higher than +V4L2_ENC_IDX_ENTRIES, but not zero. When the +application fails to read the meta data in time the oldest entries +will be lost. When the buffer is empty or no capturing/encoding is in +progress, entries will be zero. + + Currently this ioctl is only defined for MPEG-2 program +streams and video elementary streams. + + + struct <structname>v4l2_enc_idx</structname> + + &cs-str; + + + __u32 + entries + The number of entries the driver stored in the +entry array. + + + __u32 + entries_cap + The number of entries the driver can +buffer. Must be greater than zero. + + + __u32 + reserved[4] + Reserved for future extensions. +Drivers must set the array to zero. + + + &v4l2-enc-idx-entry; + entry[V4L2_ENC_IDX_ENTRIES] + Meta data about a compressed video stream. Each +element of the array corresponds to one picture, sorted in ascending +order by their offset. + + + +
+ + + struct <structname>v4l2_enc_idx_entry</structname> + + &cs-str; + + + __u64 + offset + The offset in bytes from the beginning of the +compressed video stream to the beginning of this picture, that is a +PES packet header as defined in or a picture +header as defined in . When +the encoder is stopped, the driver resets the offset to zero. + + + __u64 + pts + The 33 bit Presentation Time +Stamp of this picture as defined in . + + + __u32 + length + The length of this picture in bytes. + + + __u32 + flags + Flags containing the coding type of this picture, see . + + + __u32 + reserved[2] + Reserved for future extensions. +Drivers must set the array to zero. + + + +
+ + + Index Entry Flags + + &cs-def; + + + V4L2_ENC_IDX_FRAME_I + 0x00 + This is an Intra-coded picture. + + + V4L2_ENC_IDX_FRAME_P + 0x01 + This is a Predictive-coded picture. + + + V4L2_ENC_IDX_FRAME_B + 0x02 + This is a Bidirectionally predictive-coded +picture. + + + V4L2_ENC_IDX_FRAME_MASK + 0x0F + AND the flags field with +this mask to obtain the picture coding type. + + + +
+ + + + &return-value; + + + + EINVAL + + The driver does not support this ioctl. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/v4l/vidioc-g-ext-ctrls.xml new file mode 100644 index 00000000000..3aa7f8f9ff0 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-ext-ctrls.xml @@ -0,0 +1,307 @@ + + + ioctl VIDIOC_G_EXT_CTRLS, VIDIOC_S_EXT_CTRLS, +VIDIOC_TRY_EXT_CTRLS + &manvol; + + + + VIDIOC_G_EXT_CTRLS + VIDIOC_S_EXT_CTRLS + VIDIOC_TRY_EXT_CTRLS + Get or set the value of several controls, try control +values + + + + + + int ioctl + int fd + int request + struct v4l2_ext_controls +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_EXT_CTRLS, VIDIOC_S_EXT_CTRLS, +VIDIOC_TRY_EXT_CTRLS + + + + argp + + + + + + + + + Description + + These ioctls allow the caller to get or set multiple +controls atomically. Control IDs are grouped into control classes (see +) and all controls in the control array +must belong to the same control class. + + Applications must always fill in the +count, +ctrl_class, +controls and +reserved fields of &v4l2-ext-controls;, and +initialize the &v4l2-ext-control; array pointed to by the +controls fields. + + To get the current value of a set of controls applications +initialize the id, +size and reserved2 fields +of each &v4l2-ext-control; and call the +VIDIOC_G_EXT_CTRLS ioctl. String controls controls +must also set the string field. + + If the size is too small to +receive the control result (only relevant for pointer-type controls +like strings), then the driver will set size +to a valid value and return an &ENOSPC;. You should re-allocate the +string memory to this new size and try again. It is possible that the +same issue occurs again if the string has grown in the meantime. It is +recommended to call &VIDIOC-QUERYCTRL; first and use +maximum+1 as the new size +value. It is guaranteed that that is sufficient memory. + + + To change the value of a set of controls applications +initialize the id, size, +reserved2 and +value/string fields of each &v4l2-ext-control; and +call the VIDIOC_S_EXT_CTRLS ioctl. The controls +will only be set if all control values are +valid. + + To check if a set of controls have correct values applications +initialize the id, size, +reserved2 and +value/string fields of each &v4l2-ext-control; and +call the VIDIOC_TRY_EXT_CTRLS ioctl. It is up to +the driver whether wrong values are automatically adjusted to a valid +value or if an error is returned. + + When the id or +ctrl_class is invalid drivers return an +&EINVAL;. When the value is out of bounds drivers can choose to take +the closest valid value or return an &ERANGE;, whatever seems more +appropriate. In the first case the new value is set in +&v4l2-ext-control;. + + The driver will only set/get these controls if all control +values are correct. This prevents the situation where only some of the +controls were set/get. Only low-level errors (⪚ a failed i2c +command) can still cause this situation. + + + struct <structname>v4l2_ext_control</structname> + + &cs-ustr; + + + __u32 + id + + Identifies the control, set by the +application. + + + __u32 + size + + The total size in bytes of the payload of this +control. This is normally 0, but for pointer controls this should be +set to the size of the memory containing the payload, or that will +receive the payload. If VIDIOC_G_EXT_CTRLS finds +that this value is less than is required to store +the payload result, then it is set to a value large enough to store the +payload result and ENOSPC is returned. Note that for string controls +this size field should not be confused with the length of the string. +This field refers to the size of the memory that contains the string. +The actual length of the string may well be much smaller. + + + + __u32 + reserved2[1] + + Reserved for future extensions. Drivers and +applications must set the array to zero. + + + union + (anonymous) + + + + __s32 + value + New value or current value. + + + + __s64 + value64 + New value or current value. + + + + char * + string + A pointer to a string. + + + +
+ + + struct <structname>v4l2_ext_controls</structname> + + &cs-str; + + + __u32 + ctrl_class + The control class to which all controls belong, see +. + + + __u32 + count + The number of controls in the controls array. May +also be zero. + + + __u32 + error_idx + Set by the driver in case of an error. It is the +index of the control causing the error or equal to 'count' when the +error is not associated with a particular control. Undefined when the +ioctl returns 0 (success). + + + __u32 + reserved[2] + Reserved for future extensions. Drivers and +applications must set the array to zero. + + + &v4l2-ext-control; * + controls + Pointer to an array of +count v4l2_ext_control structures. Ignored +if count equals zero. + + + +
+ + + Control classes + + &cs-def; + + + V4L2_CTRL_CLASS_USER + 0x980000 + The class containing user controls. These controls +are described in . All controls that can be set +using the &VIDIOC-S-CTRL; and &VIDIOC-G-CTRL; ioctl belong to this +class. + + + V4L2_CTRL_CLASS_MPEG + 0x990000 + The class containing MPEG compression controls. +These controls are described in . + + + V4L2_CTRL_CLASS_CAMERA + 0x9a0000 + The class containing camera controls. +These controls are described in . + + + V4L2_CTRL_CLASS_FM_TX + 0x9b0000 + The class containing FM Transmitter (FM TX) controls. +These controls are described in . + + + +
+ + + + + &return-value; + + + + EINVAL + + The &v4l2-ext-control; id +is invalid or the &v4l2-ext-controls; +ctrl_class is invalid. This error code is +also returned by the VIDIOC_S_EXT_CTRLS and +VIDIOC_TRY_EXT_CTRLS ioctls if two or more +control values are in conflict. + + + + ERANGE + + The &v4l2-ext-control; value +is out of bounds. + + + + EBUSY + + The control is temporarily not changeable, possibly +because another applications took over control of the device function +this control belongs to. + + + + ENOSPC + + The space reserved for the control's payload is insufficient. +The field size is set to a value that is enough +to store the payload and this error code is returned. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/v4l/vidioc-g-fbuf.xml new file mode 100644 index 00000000000..f7017062656 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-fbuf.xml @@ -0,0 +1,456 @@ + + + ioctl VIDIOC_G_FBUF, VIDIOC_S_FBUF + &manvol; + + + + VIDIOC_G_FBUF + VIDIOC_S_FBUF + Get or set frame buffer overlay parameters + + + + + + int ioctl + int fd + int request + struct v4l2_framebuffer *argp + + + + + int ioctl + int fd + int request + const struct v4l2_framebuffer *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_FBUF, VIDIOC_S_FBUF + + + + argp + + + + + + + + + Description + + Applications can use the VIDIOC_G_FBUF and +VIDIOC_S_FBUF ioctl to get and set the +framebuffer parameters for a Video +Overlay or Video Output Overlay +(OSD). The type of overlay is implied by the device type (capture or +output device) and can be determined with the &VIDIOC-QUERYCAP; ioctl. +One /dev/videoN device must not support both +kinds of overlay. + + The V4L2 API distinguishes destructive and non-destructive +overlays. A destructive overlay copies captured video images into the +video memory of a graphics card. A non-destructive overlay blends +video images into a VGA signal or graphics into a video signal. +Video Output Overlays are always +non-destructive. + + To get the current parameters applications call the +VIDIOC_G_FBUF ioctl with a pointer to a +v4l2_framebuffer structure. The driver fills +all fields of the structure or returns an &EINVAL; when overlays are +not supported. + + To set the parameters for a Video Output +Overlay, applications must initialize the +flags field of a struct +v4l2_framebuffer. Since the framebuffer is +implemented on the TV card all other parameters are determined by the +driver. When an application calls VIDIOC_S_FBUF +with a pointer to this structure, the driver prepares for the overlay +and returns the framebuffer parameters as +VIDIOC_G_FBUF does, or it returns an error +code. + + To set the parameters for a non-destructive +Video Overlay, applications must initialize the +flags field, the +fmt substructure, and call +VIDIOC_S_FBUF. Again the driver prepares for the +overlay and returns the framebuffer parameters as +VIDIOC_G_FBUF does, or it returns an error +code. + + For a destructive Video Overlay +applications must additionally provide a +base address. Setting up a DMA to a +random memory location can jeopardize the system security, its +stability or even damage the hardware, therefore only the superuser +can set the parameters for a destructive video overlay. + + + + + struct <structname>v4l2_framebuffer</structname> + + &cs-ustr; + + + __u32 + capability + + Overlay capability flags set by the driver, see +. + + + __u32 + flags + + Overlay control flags set by application and +driver, see + + + void * + base + + Physical base address of the framebuffer, +that is the address of the pixel in the top left corner of the +framebuffer.A physical base address may not suit all +platforms. GK notes in theory we should pass something like PCI device ++ memory region + offset instead. If you encounter problems please +discuss on the linux-media mailing list: &v4l-ml;. + + + + + + This field is irrelevant to +non-destructive Video Overlays. For +destructive Video Overlays applications must +provide a base address. The driver may accept only base addresses +which are a multiple of two, four or eight bytes. For +Video Output Overlays the driver must return +a valid base address, so applications can find the corresponding Linux +framebuffer device (see ). + + + &v4l2-pix-format; + fmt + + Layout of the frame buffer. The +v4l2_pix_format structure is defined in , for clarification the fields and acceptable values + are listed below: + + + + __u32 + width + Width of the frame buffer in pixels. + + + + __u32 + height + Height of the frame buffer in pixels. + + + + __u32 + pixelformat + The pixel format of the +framebuffer. + + + + + + For non-destructive Video +Overlays this field only defines a format for the +&v4l2-window; chromakey field. + + + + + + For destructive Video +Overlays applications must initialize this field. For +Video Output Overlays the driver must return +a valid format. + + + + + + Usually this is an RGB format (for example +V4L2_PIX_FMT_RGB565) +but YUV formats (only packed YUV formats when chroma keying is used, +not including V4L2_PIX_FMT_YUYV and +V4L2_PIX_FMT_UYVY) and the +V4L2_PIX_FMT_PAL8 format are also permitted. The +behavior of the driver when an application requests a compressed +format is undefined. See for information on +pixel formats. + + + + &v4l2-field; + field + Drivers and applications shall ignore this field. +If applicable, the field order is selected with the &VIDIOC-S-FMT; +ioctl, using the field field of +&v4l2-window;. + + + + __u32 + bytesperline + Distance in bytes between the leftmost pixels in +two adjacent lines. + + + This field is irrelevant to +non-destructive Video +Overlays.For destructive Video +Overlays both applications and drivers can set this field +to request padding bytes at the end of each line. Drivers however may +ignore the requested value, returning width +times bytes-per-pixel or a larger value required by the hardware. That +implies applications can just set this field to zero to get a +reasonable default.For Video Output +Overlays the driver must return a valid +value.Video hardware may access padding bytes, therefore +they must reside in accessible memory. Consider for example the case +where padding bytes after the last line of an image cross a system +page boundary. Capture devices may write padding bytes, the value is +undefined. Output devices ignore the contents of padding +bytes.When the image format is planar the +bytesperline value applies to the largest +plane and is divided by the same factor as the +width field for any smaller planes. For +example the Cb and Cr planes of a YUV 4:2:0 image have half as many +padding bytes following each line as the Y plane. To avoid ambiguities +drivers must return a bytesperline value +rounded up to a multiple of the scale factor. + + + + __u32 + sizeimage + This field is irrelevant to +non-destructive Video Overlays. For +destructive Video Overlays applications must +initialize this field. For Video Output +Overlays the driver must return a valid +format.Together with base it +defines the framebuffer memory accessible by the +driver. + + + + &v4l2-colorspace; + colorspace + This information supplements the +pixelformat and must be set by the driver, +see . + + + + __u32 + priv + Reserved for additional information about custom +(driver defined) formats. When not used drivers and applications must +set this field to zero. + + + +
+ + + Frame Buffer Capability Flags + + &cs-def; + + + V4L2_FBUF_CAP_EXTERNOVERLAY + 0x0001 + The device is capable of non-destructive overlays. +When the driver clears this flag, only destructive overlays are +supported. There are no drivers yet which support both destructive and +non-destructive overlays. + + + V4L2_FBUF_CAP_CHROMAKEY + 0x0002 + The device supports clipping by chroma-keying the +images. That is, image pixels replace pixels in the VGA or video +signal only where the latter assume a certain color. Chroma-keying +makes no sense for destructive overlays. + + + V4L2_FBUF_CAP_LIST_CLIPPING + 0x0004 + The device supports clipping using a list of clip +rectangles. + + + V4L2_FBUF_CAP_BITMAP_CLIPPING + 0x0008 + The device supports clipping using a bit mask. + + + V4L2_FBUF_CAP_LOCAL_ALPHA + 0x0010 + The device supports clipping/blending using the +alpha channel of the framebuffer or VGA signal. Alpha blending makes +no sense for destructive overlays. + + + V4L2_FBUF_CAP_GLOBAL_ALPHA + 0x0020 + The device supports alpha blending using a global +alpha value. Alpha blending makes no sense for destructive overlays. + + + V4L2_FBUF_CAP_LOCAL_INV_ALPHA + 0x0040 + The device supports clipping/blending using the +inverted alpha channel of the framebuffer or VGA signal. Alpha +blending makes no sense for destructive overlays. + + + +
+ + + Frame Buffer Flags + + &cs-def; + + + V4L2_FBUF_FLAG_PRIMARY + 0x0001 + The framebuffer is the primary graphics surface. +In other words, the overlay is destructive. [?] + + + V4L2_FBUF_FLAG_OVERLAY + 0x0002 + The frame buffer is an overlay surface the same +size as the capture. [?] + + + The purpose of +V4L2_FBUF_FLAG_PRIMARY and +V4L2_FBUF_FLAG_OVERLAY was never quite clear. +Most drivers seem to ignore these flags. For compatibility with the +bttv driver applications should set the +V4L2_FBUF_FLAG_OVERLAY flag. + + + V4L2_FBUF_FLAG_CHROMAKEY + 0x0004 + Use chroma-keying. The chroma-key color is +determined by the chromakey field of +&v4l2-window; and negotiated with the &VIDIOC-S-FMT; ioctl, see +and + . + + + There are no flags to enable +clipping using a list of clip rectangles or a bitmap. These methods +are negotiated with the &VIDIOC-S-FMT; ioctl, see and . + + + V4L2_FBUF_FLAG_LOCAL_ALPHA + 0x0008 + Use the alpha channel of the framebuffer to clip or +blend framebuffer pixels with video images. The blend +function is: output = framebuffer pixel * alpha + video pixel * (1 - +alpha). The actual alpha depth depends on the framebuffer pixel +format. + + + V4L2_FBUF_FLAG_GLOBAL_ALPHA + 0x0010 + Use a global alpha value to blend the framebuffer +with video images. The blend function is: output = (framebuffer pixel +* alpha + video pixel * (255 - alpha)) / 255. The alpha value is +determined by the global_alpha field of +&v4l2-window; and negotiated with the &VIDIOC-S-FMT; ioctl, see +and . + + + V4L2_FBUF_FLAG_LOCAL_INV_ALPHA + 0x0020 + Like +V4L2_FBUF_FLAG_LOCAL_ALPHA, use the alpha channel +of the framebuffer to clip or blend framebuffer pixels with video +images, but with an inverted alpha value. The blend function is: +output = framebuffer pixel * (1 - alpha) + video pixel * alpha. The +actual alpha depth depends on the framebuffer pixel format. + + + +
+ + + + &return-value; + + + + EPERM + + VIDIOC_S_FBUF can only be called +by a privileged user to negotiate the parameters for a destructive +overlay. + + + + EBUSY + + The framebuffer parameters cannot be changed at this +time because overlay is already enabled, or capturing is enabled +and the hardware cannot capture and overlay simultaneously. + + + + EINVAL + + The ioctl is not supported or the +VIDIOC_S_FBUF parameters are unsuitable. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-fmt.xml b/Documentation/DocBook/v4l/vidioc-g-fmt.xml new file mode 100644 index 00000000000..7c7d1b72c40 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-fmt.xml @@ -0,0 +1,201 @@ + + + ioctl VIDIOC_G_FMT, VIDIOC_S_FMT, +VIDIOC_TRY_FMT + &manvol; + + + + VIDIOC_G_FMT + VIDIOC_S_FMT + VIDIOC_TRY_FMT + Get or set the data format, try a format + + + + + + int ioctl + int fd + int request + struct v4l2_format +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_FMT, VIDIOC_S_FMT, VIDIOC_TRY_FMT + + + + argp + + + + + + + + + Description + + These ioctls are used to negotiate the format of data +(typically image format) exchanged between driver and +application. + + To query the current parameters applications set the +type field of a struct +v4l2_format to the respective buffer (stream) +type. For example video capture devices use +V4L2_BUF_TYPE_VIDEO_CAPTURE. When the application +calls the VIDIOC_G_FMT ioctl with a pointer to +this structure the driver fills the respective member of the +fmt union. In case of video capture devices +that is the &v4l2-pix-format; pix member. +When the requested buffer type is not supported drivers return an +&EINVAL;. + + To change the current format parameters applications +initialize the type field and all +fields of the respective fmt +union member. For details see the documentation of the various devices +types in . Good practice is to query the +current parameters first, and to +modify only those parameters not suitable for the application. When +the application calls the VIDIOC_S_FMT ioctl +with a pointer to a v4l2_format structure +the driver checks +and adjusts the parameters against hardware abilities. Drivers +should not return an error code unless the input is ambiguous, this is +a mechanism to fathom device capabilities and to approach parameters +acceptable for both the application and driver. On success the driver +may program the hardware, allocate resources and generally prepare for +data exchange. +Finally the VIDIOC_S_FMT ioctl returns the +current format parameters as VIDIOC_G_FMT does. +Very simple, inflexible devices may even ignore all input and always +return the default parameters. However all V4L2 devices exchanging +data with the application must implement the +VIDIOC_G_FMT and +VIDIOC_S_FMT ioctl. When the requested buffer +type is not supported drivers return an &EINVAL; on a +VIDIOC_S_FMT attempt. When I/O is already in +progress or the resource is not available for other reasons drivers +return the &EBUSY;. + + The VIDIOC_TRY_FMT ioctl is equivalent +to VIDIOC_S_FMT with one exception: it does not +change driver state. It can also be called at any time, never +returning EBUSY. This function is provided to +negotiate parameters, to learn about hardware limitations, without +disabling I/O or possibly time consuming hardware preparations. +Although strongly recommended drivers are not required to implement +this ioctl. + + + struct <structname>v4l2_format</structname> + + + + + + + + &v4l2-buf-type; + type + + Type of the data stream, see . + + + union + fmt + + + + &v4l2-pix-format; + pix + Definition of an image format, see , used by video capture and output +devices. + + + + &v4l2-window; + win + Definition of an overlaid image, see , used by video overlay devices. + + + + &v4l2-vbi-format; + vbi + Raw VBI capture or output parameters. This is +discussed in more detail in . Used by raw VBI +capture and output devices. + + + + &v4l2-sliced-vbi-format; + sliced + Sliced VBI capture or output parameters. See + for details. Used by sliced VBI +capture and output devices. + + + + __u8 + raw_data[200] + Place holder for future extensions and custom +(driver defined) formats with type +V4L2_BUF_TYPE_PRIVATE and higher. + + + +
+ + + + &return-value; + + + + EBUSY + + The data format cannot be changed at this +time, for example because I/O is already in progress. + + + + EINVAL + + The &v4l2-format; type +field is invalid, the requested buffer type not supported, or +VIDIOC_TRY_FMT was called and is not +supported with this buffer type. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/v4l/vidioc-g-frequency.xml new file mode 100644 index 00000000000..062d7206909 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-frequency.xml @@ -0,0 +1,145 @@ + + + ioctl VIDIOC_G_FREQUENCY, VIDIOC_S_FREQUENCY + &manvol; + + + + VIDIOC_G_FREQUENCY + VIDIOC_S_FREQUENCY + Get or set tuner or modulator radio +frequency + + + + + + int ioctl + int fd + int request + struct v4l2_frequency +*argp + + + + + int ioctl + int fd + int request + const struct v4l2_frequency +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_FREQUENCY, VIDIOC_S_FREQUENCY + + + + argp + + + + + + + + + Description + + To get the current tuner or modulator radio frequency +applications set the tuner field of a +&v4l2-frequency; to the respective tuner or modulator number (only +input devices have tuners, only output devices have modulators), zero +out the reserved array and +call the VIDIOC_G_FREQUENCY ioctl with a pointer +to this structure. The driver stores the current frequency in the +frequency field. + + To change the current tuner or modulator radio frequency +applications initialize the tuner, +type and +frequency fields, and the +reserved array of a &v4l2-frequency; and +call the VIDIOC_S_FREQUENCY ioctl with a pointer +to this structure. When the requested frequency is not possible the +driver assumes the closest possible value. However +VIDIOC_S_FREQUENCY is a write-only ioctl, it does +not return the actual new frequency. + + + struct <structname>v4l2_frequency</structname> + + &cs-str; + + + __u32 + tuner + The tuner or modulator index number. This is the +same value as in the &v4l2-input; tuner +field and the &v4l2-tuner; index field, or +the &v4l2-output; modulator field and the +&v4l2-modulator; index field. + + + &v4l2-tuner-type; + type + The tuner type. This is the same value as in the +&v4l2-tuner; type field. The field is not +applicable to modulators, &ie; ignored by drivers. + + + __u32 + frequency + Tuning frequency in units of 62.5 kHz, or if the +&v4l2-tuner; or &v4l2-modulator; capabilities flag +V4L2_TUNER_CAP_LOW is set, in units of 62.5 +Hz. + + + __u32 + reserved[8] + Reserved for future extensions. Drivers and + applications must set the array to zero. + + + +
+ + + + &return-value; + + + + EINVAL + + The tuner index is out of +bounds or the value in the type field is +wrong. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-input.xml b/Documentation/DocBook/v4l/vidioc-g-input.xml new file mode 100644 index 00000000000..ed076e92760 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-input.xml @@ -0,0 +1,100 @@ + + + ioctl VIDIOC_G_INPUT, VIDIOC_S_INPUT + &manvol; + + + + VIDIOC_G_INPUT + VIDIOC_S_INPUT + Query or select the current video input + + + + + + int ioctl + int fd + int request + int *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_INPUT, VIDIOC_S_INPUT + + + + argp + + + + + + + + + Description + + To query the current video input applications call the +VIDIOC_G_INPUT ioctl with a pointer to an integer +where the driver stores the number of the input, as in the +&v4l2-input; index field. This ioctl will +fail only when there are no video inputs, returning +EINVAL. + + To select a video input applications store the number of the +desired input in an integer and call the +VIDIOC_S_INPUT ioctl with a pointer to this +integer. Side effects are possible. For example inputs may support +different video standards, so the driver may implicitly switch the +current standard. It is good practice to select an input before +querying or negotiating any other parameters. + + Information about video inputs is available using the +&VIDIOC-ENUMINPUT; ioctl. + + + + &return-value; + + + + EINVAL + + The number of the video input is out of bounds, or +there are no video inputs at all and this ioctl is not +supported. + + + + EBUSY + + I/O is in progress, the input cannot be +switched. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-jpegcomp.xml b/Documentation/DocBook/v4l/vidioc-g-jpegcomp.xml new file mode 100644 index 00000000000..77394b28741 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-jpegcomp.xml @@ -0,0 +1,180 @@ + + + ioctl VIDIOC_G_JPEGCOMP, VIDIOC_S_JPEGCOMP + &manvol; + + + + VIDIOC_G_JPEGCOMP + VIDIOC_S_JPEGCOMP + + + + + + + int ioctl + int fd + int request + v4l2_jpegcompression *argp + + + + + int ioctl + int fd + int request + const v4l2_jpegcompression *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_JPEGCOMP, VIDIOC_S_JPEGCOMP + + + + argp + + + + + + + + + Description + + [to do] + + Ronald Bultje elaborates: + + + + APP is some application-specific information. The +application can set it itself, and it'll be stored in the JPEG-encoded +fields (eg; interlacing information for in an AVI or so). COM is the +same, but it's comments, like 'encoded by me' or so. + + jpeg_markers describes whether the huffman tables, +quantization tables and the restart interval information (all +JPEG-specific stuff) should be stored in the JPEG-encoded fields. +These define how the JPEG field is encoded. If you omit them, +applications assume you've used standard encoding. You usually do want +to add them. + + + + + struct <structname>v4l2_jpegcompression</structname> + + &cs-str; + + + int + quality + + + + int + APPn + + + + int + APP_len + + + + char + APP_data[60] + + + + int + COM_len + + + + char + COM_data[60] + + + + __u32 + jpeg_markers + See . + + + +
+ + + JPEG Markers Flags + + &cs-def; + + + V4L2_JPEG_MARKER_DHT + (1<<3) + Define Huffman Tables + + + V4L2_JPEG_MARKER_DQT + (1<<4) + Define Quantization Tables + + + V4L2_JPEG_MARKER_DRI + (1<<5) + Define Restart Interval + + + V4L2_JPEG_MARKER_COM + (1<<6) + Comment segment + + + V4L2_JPEG_MARKER_APP + (1<<7) + App segment, driver will always use APP0 + + + +
+ + + + &return-value; + + + + EINVAL + + This ioctl is not supported. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-modulator.xml b/Documentation/DocBook/v4l/vidioc-g-modulator.xml new file mode 100644 index 00000000000..15ce660f0f5 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-modulator.xml @@ -0,0 +1,246 @@ + + + ioctl VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR + &manvol; + + + + VIDIOC_G_MODULATOR + VIDIOC_S_MODULATOR + Get or set modulator attributes + + + + + + int ioctl + int fd + int request + struct v4l2_modulator +*argp + + + + + int ioctl + int fd + int request + const struct v4l2_modulator +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR + + + + argp + + + + + + + + + Description + + To query the attributes of a modulator applications initialize +the index field and zero out the +reserved array of a &v4l2-modulator; and +call the VIDIOC_G_MODULATOR ioctl with a pointer +to this structure. Drivers fill the rest of the structure or return an +&EINVAL; when the index is out of bounds. To enumerate all modulators +applications shall begin at index zero, incrementing by one until the +driver returns EINVAL. + + Modulators have two writable properties, an audio +modulation set and the radio frequency. To change the modulated audio +subprograms, applications initialize the index + and txsubchans fields and the +reserved array and call the +VIDIOC_S_MODULATOR ioctl. Drivers may choose a +different audio modulation if the request cannot be satisfied. However +this is a write-only ioctl, it does not return the actual audio +modulation selected. + + To change the radio frequency the &VIDIOC-S-FREQUENCY; ioctl +is available. + + + struct <structname>v4l2_modulator</structname> + + &cs-str; + + + __u32 + index + Identifies the modulator, set by the +application. + + + __u8 + name[32] + Name of the modulator, a NUL-terminated ASCII +string. This information is intended for the user. + + + __u32 + capability + Modulator capability flags. No flags are defined +for this field, the tuner flags in &v4l2-tuner; +are used accordingly. The audio flags indicate the ability +to encode audio subprograms. They will not +change for example with the current video standard. + + + __u32 + rangelow + The lowest tunable frequency in units of 62.5 +KHz, or if the capability flag +V4L2_TUNER_CAP_LOW is set, in units of 62.5 +Hz. + + + __u32 + rangehigh + The highest tunable frequency in units of 62.5 +KHz, or if the capability flag +V4L2_TUNER_CAP_LOW is set, in units of 62.5 +Hz. + + + __u32 + txsubchans + With this field applications can determine how +audio sub-carriers shall be modulated. It contains a set of flags as +defined in . Note the tuner +rxsubchans flags are reused, but the +semantics are different. Video output devices are assumed to have an +analog or PCM audio input with 1-3 channels. The +txsubchans flags select one or more +channels for modulation, together with some audio subprogram +indicator, for example a stereo pilot tone. + + + __u32 + reserved[4] + Reserved for future extensions. Drivers and +applications must set the array to zero. + + + +
+ + + Modulator Audio Transmission Flags + + &cs-def; + + + V4L2_TUNER_SUB_MONO + 0x0001 + Modulate channel 1 as mono audio, when the input +has more channels, a down-mix of channel 1 and 2. This flag does not +combine with V4L2_TUNER_SUB_STEREO or +V4L2_TUNER_SUB_LANG1. + + + V4L2_TUNER_SUB_STEREO + 0x0002 + Modulate channel 1 and 2 as left and right +channel of a stereo audio signal. When the input has only one channel +or two channels and V4L2_TUNER_SUB_SAP is also +set, channel 1 is encoded as left and right channel. This flag does +not combine with V4L2_TUNER_SUB_MONO or +V4L2_TUNER_SUB_LANG1. When the driver does not +support stereo audio it shall fall back to mono. + + + V4L2_TUNER_SUB_LANG1 + 0x0008 + Modulate channel 1 and 2 as primary and secondary +language of a bilingual audio signal. When the input has only one +channel it is used for both languages. It is not possible to encode +the primary or secondary language only. This flag does not combine +with V4L2_TUNER_SUB_MONO, +V4L2_TUNER_SUB_STEREO or +V4L2_TUNER_SUB_SAP. If the hardware does not +support the respective audio matrix, or the current video standard +does not permit bilingual audio the +VIDIOC_S_MODULATOR ioctl shall return an &EINVAL; +and the driver shall fall back to mono or stereo mode. + + + V4L2_TUNER_SUB_LANG2 + 0x0004 + Same effect as +V4L2_TUNER_SUB_SAP. + + + V4L2_TUNER_SUB_SAP + 0x0004 + When combined with V4L2_TUNER_SUB_MONO + the first channel is encoded as mono audio, the last +channel as Second Audio Program. When the input has only one channel +it is used for both audio tracks. When the input has three channels +the mono track is a down-mix of channel 1 and 2. When combined with +V4L2_TUNER_SUB_STEREO channel 1 and 2 are +encoded as left and right stereo audio, channel 3 as Second Audio +Program. When the input has only two channels, the first is encoded as +left and right channel and the second as SAP. When the input has only +one channel it is used for all audio tracks. It is not possible to +encode a Second Audio Program only. This flag must combine with +V4L2_TUNER_SUB_MONO or +V4L2_TUNER_SUB_STEREO. If the hardware does not +support the respective audio matrix, or the current video standard +does not permit SAP the VIDIOC_S_MODULATOR ioctl +shall return an &EINVAL; and driver shall fall back to mono or stereo +mode. + + + V4L2_TUNER_SUB_RDS + 0x0010 + Enable the RDS encoder for a radio FM transmitter. + + + +
+ + + + &return-value; + + + + EINVAL + + The &v4l2-modulator; +index is out of bounds. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-output.xml b/Documentation/DocBook/v4l/vidioc-g-output.xml new file mode 100644 index 00000000000..3ea8c0ed812 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-output.xml @@ -0,0 +1,100 @@ + + + ioctl VIDIOC_G_OUTPUT, VIDIOC_S_OUTPUT + &manvol; + + + + VIDIOC_G_OUTPUT + VIDIOC_S_OUTPUT + Query or select the current video output + + + + + + int ioctl + int fd + int request + int *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_OUTPUT, VIDIOC_S_OUTPUT + + + + argp + + + + + + + + + Description + + To query the current video output applications call the +VIDIOC_G_OUTPUT ioctl with a pointer to an integer +where the driver stores the number of the output, as in the +&v4l2-output; index field. This ioctl +will fail only when there are no video outputs, returning the +&EINVAL;. + + To select a video output applications store the number of the +desired output in an integer and call the +VIDIOC_S_OUTPUT ioctl with a pointer to this integer. +Side effects are possible. For example outputs may support different +video standards, so the driver may implicitly switch the current +standard. It is good practice to select an output before querying or +negotiating any other parameters. + + Information about video outputs is available using the +&VIDIOC-ENUMOUTPUT; ioctl. + + + + &return-value; + + + + EINVAL + + The number of the video output is out of bounds, or +there are no video outputs at all and this ioctl is not +supported. + + + + EBUSY + + I/O is in progress, the output cannot be +switched. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-parm.xml b/Documentation/DocBook/v4l/vidioc-g-parm.xml new file mode 100644 index 00000000000..78332d365ce --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-parm.xml @@ -0,0 +1,332 @@ + + + ioctl VIDIOC_G_PARM, VIDIOC_S_PARM + &manvol; + + + + VIDIOC_G_PARM + VIDIOC_S_PARM + Get or set streaming parameters + + + + + + int ioctl + int fd + int request + v4l2_streamparm *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_PARM, VIDIOC_S_PARM + + + + argp + + + + + + + + + Description + + The current video standard determines a nominal number of +frames per second. If less than this number of frames is to be +captured or output, applications can request frame skipping or +duplicating on the driver side. This is especially useful when using +the read() or write(), which +are not augmented by timestamps or sequence counters, and to avoid +unneccessary data copying. + + Further these ioctls can be used to determine the number of +buffers used internally by a driver in read/write mode. For +implications see the section discussing the &func-read; +function. + + To get and set the streaming parameters applications call +the VIDIOC_G_PARM and +VIDIOC_S_PARM ioctl, respectively. They take a +pointer to a struct v4l2_streamparm which +contains a union holding separate parameters for input and output +devices. + + + struct <structname>v4l2_streamparm</structname> + + &cs-ustr; + + + &v4l2-buf-type; + type + + The buffer (stream) type, same as &v4l2-format; +type, set by the application. + + + union + parm + + + + + + &v4l2-captureparm; + capture + Parameters for capture devices, used when +type is +V4L2_BUF_TYPE_VIDEO_CAPTURE. + + + + &v4l2-outputparm; + output + Parameters for output devices, used when +type is +V4L2_BUF_TYPE_VIDEO_OUTPUT. + + + + __u8 + raw_data[200] + A place holder for future extensions and custom +(driver defined) buffer types V4L2_BUF_TYPE_PRIVATE and +higher. + + + +
+ + + struct <structname>v4l2_captureparm</structname> + + &cs-str; + + + __u32 + capability + See . + + + __u32 + capturemode + Set by drivers and applications, see . + + + &v4l2-fract; + timeperframe + This is is the desired period between +successive frames captured by the driver, in seconds. The +field is intended to skip frames on the driver side, saving I/O +bandwidth.Applications store here the desired frame +period, drivers return the actual frame period, which must be greater +or equal to the nominal frame period determined by the current video +standard (&v4l2-standard; frameperiod +field). Changing the video standard (also implicitly by switching the +video input) may reset this parameter to the nominal frame period. To +reset manually applications can just set this field to +zero.Drivers support this function only when they set the +V4L2_CAP_TIMEPERFRAME flag in the +capability field. + + + __u32 + extendedmode + Custom (driver specific) streaming parameters. When +unused, applications and drivers must set this field to zero. +Applications using this field should check the driver name and +version, see . + + + __u32 + readbuffers + Applications set this field to the desired number +of buffers used internally by the driver in &func-read; mode. Drivers +return the actual number of buffers. When an application requests zero +buffers, drivers should just return the current setting rather than +the minimum or an error code. For details see . + + + __u32 + reserved[4] + Reserved for future extensions. Drivers and +applications must set the array to zero. + + + +
+ + + struct <structname>v4l2_outputparm</structname> + + &cs-str; + + + __u32 + capability + See . + + + __u32 + outputmode + Set by drivers and applications, see . + + + &v4l2-fract; + timeperframe + This is is the desired period between +successive frames output by the driver, in seconds. + + + The field is intended to +repeat frames on the driver side in &func-write; mode (in streaming +mode timestamps can be used to throttle the output), saving I/O +bandwidth.Applications store here the desired frame +period, drivers return the actual frame period, which must be greater +or equal to the nominal frame period determined by the current video +standard (&v4l2-standard; frameperiod +field). Changing the video standard (also implicitly by switching the +video output) may reset this parameter to the nominal frame period. To +reset manually applications can just set this field to +zero.Drivers support this function only when they set the +V4L2_CAP_TIMEPERFRAME flag in the +capability field. + + + __u32 + extendedmode + Custom (driver specific) streaming parameters. When +unused, applications and drivers must set this field to zero. +Applications using this field should check the driver name and +version, see . + + + __u32 + writebuffers + Applications set this field to the desired number +of buffers used internally by the driver in +write() mode. Drivers return the actual number of +buffers. When an application requests zero buffers, drivers should +just return the current setting rather than the minimum or an error +code. For details see . + + + __u32 + reserved[4] + Reserved for future extensions. Drivers and +applications must set the array to zero. + + + +
+ + + Streaming Parameters Capabilites + + &cs-def; + + + V4L2_CAP_TIMEPERFRAME + 0x1000 + The frame skipping/repeating controlled by the +timeperframe field is supported. + + + +
+ + + Capture Parameters Flags + + &cs-def; + + + V4L2_MODE_HIGHQUALITY + 0x0001 + High quality imaging mode. High quality mode +is intended for still imaging applications. The idea is to get the +best possible image quality that the hardware can deliver. It is not +defined how the driver writer may achieve that; it will depend on the +hardware and the ingenuity of the driver writer. High quality mode is +a different mode from the the regular motion video capture modes. In +high quality mode: + + The driver may be able to capture higher +resolutions than for motion capture. + + + The driver may support fewer pixel formats +than motion capture (eg; true color). + + + The driver may capture and arithmetically +combine multiple successive fields or frames to remove color edge +artifacts and reduce the noise in the video data. + + + + The driver may capture images in slices like +a scanner in order to handle larger format images than would otherwise +be possible. + + + An image capture operation may be +significantly slower than motion capture. + + + Moving objects in the image might have +excessive motion blur. + + + Capture might only work through the +read() call. + + + + + +
+ + + + + &return-value; + + + + EINVAL + + This ioctl is not supported. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-priority.xml b/Documentation/DocBook/v4l/vidioc-g-priority.xml new file mode 100644 index 00000000000..5fb00197864 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-priority.xml @@ -0,0 +1,144 @@ + + + ioctl VIDIOC_G_PRIORITY, VIDIOC_S_PRIORITY + &manvol; + + + + VIDIOC_G_PRIORITY + VIDIOC_S_PRIORITY + Query or request the access priority associated with a +file descriptor + + + + + + int ioctl + int fd + int request + enum v4l2_priority *argp + + + + + int ioctl + int fd + int request + const enum v4l2_priority *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_PRIORITY, VIDIOC_S_PRIORITY + + + + argp + + Pointer to an enum v4l2_priority type. + + + + + + + Description + + To query the current access priority +applications call the VIDIOC_G_PRIORITY ioctl +with a pointer to an enum v4l2_priority variable where the driver stores +the current priority. + + To request an access priority applications store the +desired priority in an enum v4l2_priority variable and call +VIDIOC_S_PRIORITY ioctl with a pointer to this +variable. + + + enum v4l2_priority + + &cs-def; + + + V4L2_PRIORITY_UNSET + 0 + + + + V4L2_PRIORITY_BACKGROUND + 1 + Lowest priority, usually applications running in +background, for example monitoring VBI transmissions. A proxy +application running in user space will be necessary if multiple +applications want to read from a device at this priority. + + + V4L2_PRIORITY_INTERACTIVE + 2 + + + + V4L2_PRIORITY_DEFAULT + 2 + Medium priority, usually applications started and +interactively controlled by the user. For example TV viewers, Teletext +browsers, or just "panel" applications to change the channel or video +controls. This is the default priority unless an application requests +another. + + + V4L2_PRIORITY_RECORD + 3 + Highest priority. Only one file descriptor can have +this priority, it blocks any other fd from changing device properties. +Usually applications which must not be interrupted, like video +recording. + + + +
+ + + + &return-value; + + + + EINVAL + + The requested priority value is invalid, or the +driver does not support access priorities. + + + + EBUSY + + Another application already requested higher +priority. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-sliced-vbi-cap.xml b/Documentation/DocBook/v4l/vidioc-g-sliced-vbi-cap.xml new file mode 100644 index 00000000000..10e721b1737 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-sliced-vbi-cap.xml @@ -0,0 +1,264 @@ + + + ioctl VIDIOC_G_SLICED_VBI_CAP + &manvol; + + + + VIDIOC_G_SLICED_VBI_CAP + Query sliced VBI capabilities + + + + + + int ioctl + int fd + int request + struct v4l2_sliced_vbi_cap *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_SLICED_VBI_CAP + + + + argp + + + + + + + + + Description + + To find out which data services are supported by a sliced +VBI capture or output device, applications initialize the +type field of a &v4l2-sliced-vbi-cap;, +clear the reserved array and +call the VIDIOC_G_SLICED_VBI_CAP ioctl. The +driver fills in the remaining fields or returns an &EINVAL; if the +sliced VBI API is unsupported or type +is invalid. + + Note the type field was added, +and the ioctl changed from read-only to write-read, in Linux 2.6.19. + + + struct <structname>v4l2_sliced_vbi_cap</structname> + + + + + + + + + + __u16 + service_set + A set of all data services +supported by the driver. Equal to the union of all elements of the +service_lines array. + + + __u16 + service_lines[2][24] + Each element of this array +contains a set of data services the hardware can look for or insert +into a particular scan line. Data services are defined in . Array indices map to ITU-R +line numbers (see also and ) as follows: + + + + + Element + 525 line systems + 625 line systems + + + + + service_lines[0][1] + 1 + 1 + + + + + service_lines[0][23] + 23 + 23 + + + + + service_lines[1][1] + 264 + 314 + + + + + service_lines[1][23] + 286 + 336 + + + + + + + + The number of VBI lines the +hardware can capture or output per frame, or the number of services it +can identify on a given line may be limited. For example on PAL line +16 the hardware may be able to look for a VPS or Teletext signal, but +not both at the same time. Applications can learn about these limits +using the &VIDIOC-S-FMT; ioctl as described in . + + + + + + + + Drivers must set +service_lines[0][0] and +service_lines[1][0] to zero. + + + &v4l2-buf-type; + type + Type of the data stream, see . Should be +V4L2_BUF_TYPE_SLICED_VBI_CAPTURE or +V4L2_BUF_TYPE_SLICED_VBI_OUTPUT. + + + __u32 + reserved[3] + This array is reserved for future +extensions. Applications and drivers must set it to zero. + + + +
+ + + + Sliced VBI services + + + + + + + + + + Symbol + Value + Reference + Lines, usually + Payload + + + + + V4L2_SLICED_TELETEXT_B (Teletext +System B) + 0x0001 + , + PAL/SECAM line 7-22, 320-335 (second field 7-22) + Last 42 of the 45 byte Teletext packet, that is +without clock run-in and framing code, lsb first transmitted. + + + V4L2_SLICED_VPS + 0x0400 + + PAL line 16 + Byte number 3 to 15 according to Figure 9 of +ETS 300 231, lsb first transmitted. + + + V4L2_SLICED_CAPTION_525 + 0x1000 + + NTSC line 21, 284 (second field 21) + Two bytes in transmission order, including parity +bit, lsb first transmitted. + + + V4L2_SLICED_WSS_625 + 0x4000 + , + PAL/SECAM line 23 + +Byte 0 1 + msb lsb msb lsb +Bit 7 6 5 4 3 2 1 0 x x 13 12 11 10 9 + + + + V4L2_SLICED_VBI_525 + 0x1000 + Set of services applicable to 525 +line systems. + + + V4L2_SLICED_VBI_625 + 0x4401 + Set of services applicable to 625 +line systems. + + + +
+ + + + + &return-value; + + + + EINVAL + + The device does not support sliced VBI capturing or +output, or the value in the type field is +wrong. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-std.xml b/Documentation/DocBook/v4l/vidioc-g-std.xml new file mode 100644 index 00000000000..b6f5d267e85 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-std.xml @@ -0,0 +1,99 @@ + + + ioctl VIDIOC_G_STD, VIDIOC_S_STD + &manvol; + + + + VIDIOC_G_STD + VIDIOC_S_STD + Query or select the video standard of the current input + + + + + + int ioctl + int fd + int request + v4l2_std_id +*argp + + + + + int ioctl + int fd + int request + const v4l2_std_id +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_STD, VIDIOC_S_STD + + + + argp + + + + + + + + + Description + + To query and select the current video standard applications +use the VIDIOC_G_STD and VIDIOC_S_STD ioctls which take a pointer to a +&v4l2-std-id; type as argument. VIDIOC_G_STD can +return a single flag or a set of flags as in &v4l2-standard; field +id. The flags must be unambiguous such +that they appear in only one enumerated v4l2_standard structure. + + VIDIOC_S_STD accepts one or more +flags, being a write-only ioctl it does not return the actual new standard as +VIDIOC_G_STD does. When no flags are given or +the current input does not support the requested standard the driver +returns an &EINVAL;. When the standard set is ambiguous drivers may +return EINVAL or choose any of the requested +standards. + + + + &return-value; + + + + EINVAL + + This ioctl is not supported, or the +VIDIOC_S_STD parameter was unsuitable. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/v4l/vidioc-g-tuner.xml new file mode 100644 index 00000000000..bd98c734c06 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-g-tuner.xml @@ -0,0 +1,535 @@ + + + ioctl VIDIOC_G_TUNER, VIDIOC_S_TUNER + &manvol; + + + + VIDIOC_G_TUNER + VIDIOC_S_TUNER + Get or set tuner attributes + + + + + + int ioctl + int fd + int request + struct v4l2_tuner +*argp + + + + + int ioctl + int fd + int request + const struct v4l2_tuner +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_TUNER, VIDIOC_S_TUNER + + + + argp + + + + + + + + + Description + + To query the attributes of a tuner applications initialize the +index field and zero out the +reserved array of a &v4l2-tuner; and call the +VIDIOC_G_TUNER ioctl with a pointer to this +structure. Drivers fill the rest of the structure or return an +&EINVAL; when the index is out of bounds. To enumerate all tuners +applications shall begin at index zero, incrementing by one until the +driver returns EINVAL. + + Tuners have two writable properties, the audio mode and +the radio frequency. To change the audio mode, applications initialize +the index, +audmode and +reserved fields and call the +VIDIOC_S_TUNER ioctl. This will +not change the current tuner, which is determined +by the current video input. Drivers may choose a different audio mode +if the requested mode is invalid or unsupported. Since this is a +write-only ioctl, it does not return the actually +selected audio mode. + + To change the radio frequency the &VIDIOC-S-FREQUENCY; ioctl +is available. + + + struct <structname>v4l2_tuner</structname> + + + + + + + + + __u32 + index + Identifies the tuner, set by the +application. + + + __u8 + name[32] + Name of the tuner, a +NUL-terminated ASCII string. This information is intended for the +user. + + + &v4l2-tuner-type; + type + Type of the tuner, see . + + + __u32 + capability + Tuner capability flags, see +. Audio flags indicate the ability +to decode audio subprograms. They will not +change, for example with the current video standard.When +the structure refers to a radio tuner only the +V4L2_TUNER_CAP_LOW, +V4L2_TUNER_CAP_STEREO and +V4L2_TUNER_CAP_RDS flags can be set. + + + __u32 + rangelow + The lowest tunable frequency in +units of 62.5 kHz, or if the capability +flag V4L2_TUNER_CAP_LOW is set, in units of 62.5 +Hz. + + + __u32 + rangehigh + The highest tunable frequency in +units of 62.5 kHz, or if the capability +flag V4L2_TUNER_CAP_LOW is set, in units of 62.5 +Hz. + + + __u32 + rxsubchans + Some tuners or audio +decoders can determine the received audio subprograms by analyzing +audio carriers, pilot tones or other indicators. To pass this +information drivers set flags defined in in this field. For +example: + + + + + V4L2_TUNER_SUB_MONO + receiving mono audio + + + + + STEREO | SAP + receiving stereo audio and a secondary audio +program + + + + + MONO | STEREO + receiving mono or stereo audio, the hardware cannot +distinguish + + + + + LANG1 | LANG2 + receiving bilingual audio + + + + + MONO | STEREO | LANG1 | LANG2 + receiving mono, stereo or bilingual +audio + + + + + When the +V4L2_TUNER_CAP_STEREO, +_LANG1, _LANG2 or +_SAP flag is cleared in the +capability field, the corresponding +V4L2_TUNER_SUB_ flag must not be set +here.This field is valid only if this is the tuner of the +current video input, or when the structure refers to a radio +tuner. + + + __u32 + audmode + The selected audio mode, see + for valid values. The audio mode does +not affect audio subprogram detection, and like a control it does not automatically change +unless the requested mode is invalid or unsupported. See for possible results when +the selected and received audio programs do not +match.Currently this is the only field of struct +v4l2_tuner applications can +change. + + + __u32 + signal + The signal strength if known, ranging +from 0 to 65535. Higher values indicate a better signal. + + + __s32 + afc + Automatic frequency control: When the +afc value is negative, the frequency is too +low, when positive too high. + + + __u32 + reserved[4] + Reserved for future extensions. Drivers and +applications must set the array to zero. + + + +
+ + + enum v4l2_tuner_type + + &cs-def; + + + V4L2_TUNER_RADIO + 1 + + + + V4L2_TUNER_ANALOG_TV + 2 + + + + +
+ + + Tuner and Modulator Capability Flags + + &cs-def; + + + V4L2_TUNER_CAP_LOW + 0x0001 + When set, tuning frequencies are expressed in units of +62.5 Hz, otherwise in units of 62.5 kHz. + + + V4L2_TUNER_CAP_NORM + 0x0002 + This is a multi-standard tuner; the video standard +can or must be switched. (B/G PAL tuners for example are typically not + considered multi-standard because the video standard is automatically + determined from the frequency band.) The set of supported video + standards is available from the &v4l2-input; pointing to this tuner, + see the description of ioctl &VIDIOC-ENUMINPUT; for details. Only + V4L2_TUNER_ANALOG_TV tuners can have this capability. + + + V4L2_TUNER_CAP_STEREO + 0x0010 + Stereo audio reception is supported. + + + V4L2_TUNER_CAP_LANG1 + 0x0040 + Reception of the primary language of a bilingual +audio program is supported. Bilingual audio is a feature of +two-channel systems, transmitting the primary language monaural on the +main audio carrier and a secondary language monaural on a second +carrier. Only + V4L2_TUNER_ANALOG_TV tuners can have this capability. + + + V4L2_TUNER_CAP_LANG2 + 0x0020 + Reception of the secondary language of a bilingual +audio program is supported. Only + V4L2_TUNER_ANALOG_TV tuners can have this capability. + + + V4L2_TUNER_CAP_SAP + 0x0020 + Reception of a secondary audio program is +supported. This is a feature of the BTSC system which accompanies the +NTSC video standard. Two audio carriers are available for mono or +stereo transmissions of a primary language, and an independent third +carrier for a monaural secondary language. Only + V4L2_TUNER_ANALOG_TV tuners can have this capability.Note the +V4L2_TUNER_CAP_LANG2 and +V4L2_TUNER_CAP_SAP flags are synonyms. +V4L2_TUNER_CAP_SAP applies when the tuner +supports the V4L2_STD_NTSC_M video +standard. + + + V4L2_TUNER_CAP_RDS + 0x0080 + RDS capture is supported. This capability is only valid for +radio tuners. + + + +
+ + + Tuner Audio Reception Flags + + &cs-def; + + + V4L2_TUNER_SUB_MONO + 0x0001 + The tuner receives a mono audio signal. + + + V4L2_TUNER_SUB_STEREO + 0x0002 + The tuner receives a stereo audio signal. + + + V4L2_TUNER_SUB_LANG1 + 0x0008 + The tuner receives the primary language of a +bilingual audio signal. Drivers must clear this flag when the current +video standard is V4L2_STD_NTSC_M. + + + V4L2_TUNER_SUB_LANG2 + 0x0004 + The tuner receives the secondary language of a +bilingual audio signal (or a second audio program). + + + V4L2_TUNER_SUB_SAP + 0x0004 + The tuner receives a Second Audio Program. Note the +V4L2_TUNER_SUB_LANG2 and +V4L2_TUNER_SUB_SAP flags are synonyms. The +V4L2_TUNER_SUB_SAP flag applies when the +current video standard is V4L2_STD_NTSC_M. + + + V4L2_TUNER_SUB_RDS + 0x0010 + The tuner receives an RDS channel. + + + +
+ + + Tuner Audio Modes + + &cs-def; + + + V4L2_TUNER_MODE_MONO + 0 + Play mono audio. When the tuner receives a stereo +signal this a down-mix of the left and right channel. When the tuner +receives a bilingual or SAP signal this mode selects the primary +language. + + + V4L2_TUNER_MODE_STEREO + 1 + Play stereo audio. When the tuner receives +bilingual audio it may play different languages on the left and right +channel or the primary language is played on both channels.Playing +different languages in this mode is +deprecated. New drivers should do this only in +MODE_LANG1_LANG2.When the tuner +receives no stereo signal or does not support stereo reception the +driver shall fall back to MODE_MONO. + + + V4L2_TUNER_MODE_LANG1 + 3 + Play the primary language, mono or stereo. Only +V4L2_TUNER_ANALOG_TV tuners support this +mode. + + + V4L2_TUNER_MODE_LANG2 + 2 + Play the secondary language, mono. When the tuner +receives no bilingual audio or SAP, or their reception is not +supported the driver shall fall back to mono or stereo mode. Only +V4L2_TUNER_ANALOG_TV tuners support this +mode. + + + V4L2_TUNER_MODE_SAP + 2 + Play the Second Audio Program. When the tuner +receives no bilingual audio or SAP, or their reception is not +supported the driver shall fall back to mono or stereo mode. Only +V4L2_TUNER_ANALOG_TV tuners support this mode. +Note the V4L2_TUNER_MODE_LANG2 and +V4L2_TUNER_MODE_SAP are synonyms. + + + V4L2_TUNER_MODE_LANG1_LANG2 + 4 + Play the primary language on the left channel, the +secondary language on the right channel. When the tuner receives no +bilingual audio or SAP, it shall fall back to +MODE_LANG1 or MODE_MONO. +Only V4L2_TUNER_ANALOG_TV tuners support this +mode. + + + +
+ + + Tuner Audio Matrix + + + + + + + + + + + Selected +V4L2_TUNER_MODE_ + + + Received V4L2_TUNER_SUB_ + MONO + STEREO + LANG1 + LANG2 = SAP + LANG1_LANG2This +mode has been added in Linux 2.6.17 and may not be supported by older +drivers. + + + + + MONO + Mono + Mono/Mono + Mono + Mono + Mono/Mono + + + MONO | SAP + Mono + Mono/Mono + Mono + SAP + Mono/SAP (preferred) or Mono/Mono + + + STEREO + L+R + L/R + Stereo L/R (preferred) or Mono L+R + Stereo L/R (preferred) or Mono L+R + L/R (preferred) or L+R/L+R + + + STEREO | SAP + L+R + L/R + Stereo L/R (preferred) or Mono L+R + SAP + L+R/SAP (preferred) or L/R or L+R/L+R + + + LANG1 | LANG2 + Language 1 + Lang1/Lang2 (deprecatedPlayback of +both languages in MODE_STEREO is deprecated. In +the future drivers should produce only the primary language in this +mode. Applications should request +MODE_LANG1_LANG2 to record both languages or a +stereo signal.) or +Lang1/Lang1 + Language 1 + Language 2 + Lang1/Lang2 (preferred) or Lang1/Lang1 + + + +
+ + + + &return-value; + + + + EINVAL + + The &v4l2-tuner; index is +out of bounds. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-log-status.xml b/Documentation/DocBook/v4l/vidioc-log-status.xml new file mode 100644 index 00000000000..2634b7c88b5 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-log-status.xml @@ -0,0 +1,58 @@ + + + ioctl VIDIOC_LOG_STATUS + &manvol; + + + + VIDIOC_LOG_STATUS + Log driver status information + + + + + + int ioctl + int fd + int request + + + + + + Description + + As the video/audio devices become more complicated it +becomes harder to debug problems. When this ioctl is called the driver +will output the current device status to the kernel log. This is +particular useful when dealing with problems like no sound, no video +and incorrectly tuned channels. Also many modern devices autodetect +video and audio standards and this ioctl will report what the device +thinks what the standard is. Mismatches may give an indication where +the problem is. + + This ioctl is optional and not all drivers support it. It +was introduced in Linux 2.6.15. + + + + &return-value; + + + + EINVAL + + The driver does not support this ioctl. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-overlay.xml b/Documentation/DocBook/v4l/vidioc-overlay.xml new file mode 100644 index 00000000000..1036c582cc1 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-overlay.xml @@ -0,0 +1,83 @@ + + + ioctl VIDIOC_OVERLAY + &manvol; + + + + VIDIOC_OVERLAY + Start or stop video overlay + + + + + + int ioctl + int fd + int request + const int *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_OVERLAY + + + + argp + + + + + + + + + Description + + This ioctl is part of the video + overlay I/O method. Applications call + VIDIOC_OVERLAY to start or stop the + overlay. It takes a pointer to an integer which must be set to + zero by the application to stop overlay, to one to start. + + Drivers do not support &VIDIOC-STREAMON; or +&VIDIOC-STREAMOFF; with V4L2_BUF_TYPE_VIDEO_OVERLAY. + + + + &return-value; + + + + EINVAL + + Video overlay is not supported, or the +parameters have not been set up. See for the necessary steps. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-qbuf.xml b/Documentation/DocBook/v4l/vidioc-qbuf.xml new file mode 100644 index 00000000000..18708177815 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-qbuf.xml @@ -0,0 +1,168 @@ + + + ioctl VIDIOC_QBUF, VIDIOC_DQBUF + &manvol; + + + + VIDIOC_QBUF + VIDIOC_DQBUF + Exchange a buffer with the driver + + + + + + int ioctl + int fd + int request + struct v4l2_buffer *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_QBUF, VIDIOC_DQBUF + + + + argp + + + + + + + + + Description + + Applications call the VIDIOC_QBUF ioctl +to enqueue an empty (capturing) or filled (output) buffer in the +driver's incoming queue. The semantics depend on the selected I/O +method. + + To enqueue a memory mapped +buffer applications set the type field of a +&v4l2-buffer; to the same buffer type as previously &v4l2-format; +type and &v4l2-requestbuffers; +type, the memory +field to V4L2_MEMORY_MMAP and the +index field. Valid index numbers range from +zero to the number of buffers allocated with &VIDIOC-REQBUFS; +(&v4l2-requestbuffers; count) minus one. The +contents of the struct v4l2_buffer returned +by a &VIDIOC-QUERYBUF; ioctl will do as well. When the buffer is +intended for output (type is +V4L2_BUF_TYPE_VIDEO_OUTPUT or +V4L2_BUF_TYPE_VBI_OUTPUT) applications must also +initialize the bytesused, +field and +timestamp fields. See for details. When +VIDIOC_QBUF is called with a pointer to this +structure the driver sets the +V4L2_BUF_FLAG_MAPPED and +V4L2_BUF_FLAG_QUEUED flags and clears the +V4L2_BUF_FLAG_DONE flag in the +flags field, or it returns an +&EINVAL;. + + To enqueue a user pointer +buffer applications set the type field of a +&v4l2-buffer; to the same buffer type as previously &v4l2-format; +type and &v4l2-requestbuffers; +type, the memory +field to V4L2_MEMORY_USERPTR and the +m.userptr field to the address of the +buffer and length to its size. When the +buffer is intended for output additional fields must be set as above. +When VIDIOC_QBUF is called with a pointer to this +structure the driver sets the V4L2_BUF_FLAG_QUEUED +flag and clears the V4L2_BUF_FLAG_MAPPED and +V4L2_BUF_FLAG_DONE flags in the +flags field, or it returns an error code. +This ioctl locks the memory pages of the buffer in physical memory, +they cannot be swapped out to disk. Buffers remain locked until +dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl are +called, or until the device is closed. + + Applications call the VIDIOC_DQBUF +ioctl to dequeue a filled (capturing) or displayed (output) buffer +from the driver's outgoing queue. They just set the +type and memory +fields of a &v4l2-buffer; as above, when VIDIOC_DQBUF +is called with a pointer to this structure the driver fills the +remaining fields or returns an error code. + + By default VIDIOC_DQBUF blocks when no +buffer is in the outgoing queue. When the +O_NONBLOCK flag was given to the &func-open; +function, VIDIOC_DQBUF returns immediately +with an &EAGAIN; when no buffer is available. + + The v4l2_buffer structure is +specified in . + + + + &return-value; + + + + EAGAIN + + Non-blocking I/O has been selected using +O_NONBLOCK and no buffer was in the outgoing +queue. + + + + EINVAL + + The buffer type is not +supported, or the index is out of bounds, +or no buffers have been allocated yet, or the +userptr or +length are invalid. + + + + ENOMEM + + Not enough physical or virtual memory was available to +enqueue a user pointer buffer. + + + + EIO + + VIDIOC_DQBUF failed due to an +internal error. Can also indicate temporary problems like signal +loss. Note the driver might dequeue an (empty) buffer despite +returning an error, or even stop capturing. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-querybuf.xml b/Documentation/DocBook/v4l/vidioc-querybuf.xml new file mode 100644 index 00000000000..d834993e619 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-querybuf.xml @@ -0,0 +1,103 @@ + + + ioctl VIDIOC_QUERYBUF + &manvol; + + + + VIDIOC_QUERYBUF + Query the status of a buffer + + + + + + int ioctl + int fd + int request + struct v4l2_buffer *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_QUERYBUF + + + + argp + + + + + + + + + Description + + This ioctl is part of the memory +mapping I/O method. It can be used to query the status of a +buffer at any time after buffers have been allocated with the +&VIDIOC-REQBUFS; ioctl. + + Applications set the type field + of a &v4l2-buffer; to the same buffer type as previously +&v4l2-format; type and &v4l2-requestbuffers; +type, and the index + field. Valid index numbers range from zero +to the number of buffers allocated with &VIDIOC-REQBUFS; + (&v4l2-requestbuffers; count) minus one. +After calling VIDIOC_QUERYBUF with a pointer to + this structure drivers return an error code or fill the rest of +the structure. + + In the flags field the +V4L2_BUF_FLAG_MAPPED, +V4L2_BUF_FLAG_QUEUED and +V4L2_BUF_FLAG_DONE flags will be valid. The +memory field will be set to +V4L2_MEMORY_MMAP, the m.offset +contains the offset of the buffer from the start of the device memory, +the length field its size. The driver may +or may not set the remaining fields and flags, they are meaningless in +this context. + + The v4l2_buffer structure is + specified in . + + + + &return-value; + + + + EINVAL + + The buffer type is not +supported, or the index is out of bounds. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-querycap.xml b/Documentation/DocBook/v4l/vidioc-querycap.xml new file mode 100644 index 00000000000..6ab7e25b31b --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-querycap.xml @@ -0,0 +1,284 @@ + + + ioctl VIDIOC_QUERYCAP + &manvol; + + + + VIDIOC_QUERYCAP + Query device capabilities + + + + + + int ioctl + int fd + int request + struct v4l2_capability *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_QUERYCAP + + + + argp + + + + + + + + + Description + + All V4L2 devices support the +VIDIOC_QUERYCAP ioctl. It is used to identify +kernel devices compatible with this specification and to obtain +information about driver and hardware capabilities. The ioctl takes a +pointer to a &v4l2-capability; which is filled by the driver. When the +driver is not compatible with this specification the ioctl returns an +&EINVAL;. + + + struct <structname>v4l2_capability</structname> + + &cs-str; + + + __u8 + driver[16] + Name of the driver, a unique NUL-terminated +ASCII string. For example: "bttv". Driver specific applications can +use this information to verify the driver identity. It is also useful +to work around known bugs, or to identify drivers in error reports. +The driver version is stored in the version +field.Storing strings in fixed sized arrays is bad +practice but unavoidable here. Drivers and applications should take +precautions to never read or write beyond the end of the array and to +make sure the strings are properly NUL-terminated. + + + __u8 + card[32] + Name of the device, a NUL-terminated ASCII string. +For example: "Yoyodyne TV/FM". One driver may support different brands +or models of video hardware. This information is intended for users, +for example in a menu of available devices. Since multiple TV cards of +the same brand may be installed which are supported by the same +driver, this name should be combined with the character device file +name (⪚ /dev/video2) or the +bus_info string to avoid +ambiguities. + + + __u8 + bus_info[32] + Location of the device in the system, a +NUL-terminated ASCII string. For example: "PCI Slot 4". This +information is intended for users, to distinguish multiple +identical devices. If no such information is available the field may +simply count the devices controlled by the driver, or contain the +empty string (bus_info[0] = 0). + + + __u32 + version + Version number of the driver. Together with +the driver field this identifies a +particular driver. The version number is formatted using the +KERNEL_VERSION() macro: + + + + +#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) + +__u32 version = KERNEL_VERSION(0, 8, 1); + +printf ("Version: %u.%u.%u\n", + (version >> 16) & 0xFF, + (version >> 8) & 0xFF, + version & 0xFF); + + + + __u32 + capabilities + Device capabilities, see . + + + __u32 + reserved[4] + Reserved for future extensions. Drivers must set +this array to zero. + + + +
+ + + Device Capabilities Flags + + &cs-def; + + + V4L2_CAP_VIDEO_CAPTURE + 0x00000001 + The device supports the Video Capture interface. + + + V4L2_CAP_VIDEO_OUTPUT + 0x00000002 + The device supports the Video Output interface. + + + V4L2_CAP_VIDEO_OVERLAY + 0x00000004 + The device supports the Video Overlay interface. A video overlay device +typically stores captured images directly in the video memory of a +graphics card, with hardware clipping and scaling. + + + V4L2_CAP_VBI_CAPTURE + 0x00000010 + The device supports the Raw +VBI Capture interface, providing Teletext and Closed Caption +data. + + + V4L2_CAP_VBI_OUTPUT + 0x00000020 + The device supports the Raw VBI Output interface. + + + V4L2_CAP_SLICED_VBI_CAPTURE + 0x00000040 + The device supports the Sliced VBI Capture interface. + + + V4L2_CAP_SLICED_VBI_OUTPUT + 0x00000080 + The device supports the Sliced VBI Output interface. + + + V4L2_CAP_RDS_CAPTURE + 0x00000100 + The device supports the RDS interface. + + + V4L2_CAP_VIDEO_OUTPUT_OVERLAY + 0x00000200 + The device supports the Video +Output Overlay (OSD) interface. Unlike the Video +Overlay interface, this is a secondary function of video +output devices and overlays an image onto an outgoing video signal. +When the driver sets this flag, it must clear the +V4L2_CAP_VIDEO_OVERLAY flag and vice +versa.The &v4l2-framebuffer; lacks an +&v4l2-buf-type; field, therefore the type of overlay is implied by the +driver capabilities. + + + V4L2_CAP_HW_FREQ_SEEK + 0x00000400 + The device supports the &VIDIOC-S-HW-FREQ-SEEK; ioctl for +hardware frequency seeking. + + + V4L2_CAP_TUNER + 0x00010000 + The device has some sort of tuner to +receive RF-modulated video signals. For more information about +tuner programming see +. + + + V4L2_CAP_AUDIO + 0x00020000 + The device has audio inputs or outputs. It may or +may not support audio recording or playback, in PCM or compressed +formats. PCM audio support must be implemented as ALSA or OSS +interface. For more information on audio inputs and outputs see . + + + V4L2_CAP_RADIO + 0x00040000 + This is a radio receiver. + + + V4L2_CAP_MODULATOR + 0x00080000 + The device has some sort of modulator to +emit RF-modulated video/audio signals. For more information about +modulator programming see +. + + + V4L2_CAP_READWRITE + 0x01000000 + The device supports the read() and/or write() +I/O methods. + + + V4L2_CAP_ASYNCIO + 0x02000000 + The device supports the asynchronous I/O methods. + + + V4L2_CAP_STREAMING + 0x04000000 + The device supports the streaming I/O method. + + + +
+ + + + &return-value; + + + + EINVAL + + The device is not compatible with this +specification. + + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/v4l/vidioc-queryctrl.xml new file mode 100644 index 00000000000..4876ff1a1a0 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-queryctrl.xml @@ -0,0 +1,428 @@ + + + ioctl VIDIOC_QUERYCTRL, VIDIOC_QUERYMENU + &manvol; + + + + VIDIOC_QUERYCTRL + VIDIOC_QUERYMENU + Enumerate controls and menu control items + + + + + + int ioctl + int fd + int request + struct v4l2_queryctrl *argp + + + + + int ioctl + int fd + int request + struct v4l2_querymenu *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_QUERYCTRL, VIDIOC_QUERYMENU + + + + argp + + + + + + + + + Description + + To query the attributes of a control applications set the +id field of a &v4l2-queryctrl; and call the +VIDIOC_QUERYCTRL ioctl with a pointer to this +structure. The driver fills the rest of the structure or returns an +&EINVAL; when the id is invalid. + + It is possible to enumerate controls by calling +VIDIOC_QUERYCTRL with successive +id values starting from +V4L2_CID_BASE up to and exclusive +V4L2_CID_BASE_LASTP1. Drivers may return +EINVAL if a control in this range is not +supported. Further applications can enumerate private controls, which +are not defined in this specification, by starting at +V4L2_CID_PRIVATE_BASE and incrementing +id until the driver returns +EINVAL. + + In both cases, when the driver sets the +V4L2_CTRL_FLAG_DISABLED flag in the +flags field this control is permanently +disabled and should be ignored by the application. + V4L2_CTRL_FLAG_DISABLED was +intended for two purposes: Drivers can skip predefined controls not +supported by the hardware (although returning EINVAL would do as +well), or disable predefined and private controls after hardware +detection without the trouble of reordering control arrays and indices +(EINVAL cannot be used to skip private controls because it would +prematurely end the enumeration). + + When the application ORs id with +V4L2_CTRL_FLAG_NEXT_CTRL the driver returns the +next supported control, or EINVAL if there is +none. Drivers which do not support this flag yet always return +EINVAL. + + Additional information is required for menu controls: the +names of the menu items. To query them applications set the +id and index +fields of &v4l2-querymenu; and call the +VIDIOC_QUERYMENU ioctl with a pointer to this +structure. The driver fills the rest of the structure or returns an +&EINVAL; when the id or +index is invalid. Menu items are enumerated +by calling VIDIOC_QUERYMENU with successive +index values from &v4l2-queryctrl; +minimum (0) to +maximum, inclusive. + + See also the examples in . + + + struct <structname>v4l2_queryctrl</structname> + + &cs-str; + + + __u32 + id + Identifies the control, set by the application. See + for predefined IDs. When the ID is ORed +with V4L2_CTRL_FLAG_NEXT_CTRL the driver clears the flag and returns +the first control with a higher ID. Drivers which do not support this +flag yet always return an &EINVAL;. + + + &v4l2-ctrl-type; + type + Type of control, see . + + + __u8 + name[32] + Name of the control, a NUL-terminated ASCII +string. This information is intended for the user. + + + __s32 + minimum + Minimum value, inclusive. This field gives a lower +bound for V4L2_CTRL_TYPE_INTEGER controls and the +lowest valid index (always 0) for V4L2_CTRL_TYPE_MENU controls. +For V4L2_CTRL_TYPE_STRING controls the minimum value +gives the minimum length of the string. This length does not include the terminating +zero. It may not be valid for any other type of control, including +V4L2_CTRL_TYPE_INTEGER64 controls. Note that this is a +signed value. + + + __s32 + maximum + Maximum value, inclusive. This field gives an upper +bound for V4L2_CTRL_TYPE_INTEGER controls and the +highest valid index for V4L2_CTRL_TYPE_MENU +controls. +For V4L2_CTRL_TYPE_STRING controls the maximum value +gives the maximum length of the string. This length does not include the terminating +zero. It may not be valid for any other type of control, including +V4L2_CTRL_TYPE_INTEGER64 controls. Note that this is a +signed value. + + + __s32 + step + This field gives a step size for +V4L2_CTRL_TYPE_INTEGER controls. For +V4L2_CTRL_TYPE_STRING controls this field refers to +the string length that has to be a multiple of this step size. +It may not be valid for any other type of control, including +V4L2_CTRL_TYPE_INTEGER64 +controls.Generally drivers should not scale hardware +control values. It may be necessary for example when the +name or id imply +a particular unit and the hardware actually accepts only multiples of +said unit. If so, drivers must take care values are properly rounded +when scaling, such that errors will not accumulate on repeated +read-write cycles.This field gives the smallest change of +an integer control actually affecting hardware. Often the information +is needed when the user can change controls by keyboard or GUI +buttons, rather than a slider. When for example a hardware register +accepts values 0-511 and the driver reports 0-65535, step should be +128.Note that although signed, the step value is supposed to +be always positive. + + + __s32 + default_value + The default value of a +V4L2_CTRL_TYPE_INTEGER, +_BOOLEAN or _MENU control. +Not valid for other types of controls. Drivers reset controls only +when the driver is loaded, not later, in particular not when the +func-open; is called. + + + __u32 + flags + Control flags, see . + + + __u32 + reserved[2] + Reserved for future extensions. Drivers must set +the array to zero. + + + +
+ + + struct <structname>v4l2_querymenu</structname> + + &cs-str; + + + __u32 + id + Identifies the control, set by the application +from the respective &v4l2-queryctrl; +id. + + + __u32 + index + Index of the menu item, starting at zero, set by + the application. + + + __u8 + name[32] + Name of the menu item, a NUL-terminated ASCII +string. This information is intended for the user. + + + __u32 + reserved + Reserved for future extensions. Drivers must set +the array to zero. + + + +
+ + + enum v4l2_ctrl_type + + + + + + + + + Type + minimum + step + maximum + Description + + + + + V4L2_CTRL_TYPE_INTEGER + any + any + any + An integer-valued control ranging from minimum to +maximum inclusive. The step value indicates the increment between +values which are actually different on the hardware. + + + V4L2_CTRL_TYPE_BOOLEAN + 0 + 1 + 1 + A boolean-valued control. Zero corresponds to +"disabled", and one means "enabled". + + + V4L2_CTRL_TYPE_MENU + 0 + 1 + N-1 + The control has a menu of N choices. The names of +the menu items can be enumerated with the +VIDIOC_QUERYMENU ioctl. + + + V4L2_CTRL_TYPE_BUTTON + 0 + 0 + 0 + A control which performs an action when set. +Drivers must ignore the value passed with +VIDIOC_S_CTRL and return an &EINVAL; on a +VIDIOC_G_CTRL attempt. + + + V4L2_CTRL_TYPE_INTEGER64 + n/a + n/a + n/a + A 64-bit integer valued control. Minimum, maximum +and step size cannot be queried. + + + V4L2_CTRL_TYPE_STRING + ≥ 0 + ≥ 1 + ≥ 0 + The minimum and maximum string lengths. The step size +means that the string must be (minimum + N * step) characters long for +N ≥ 0. These lengths do not include the terminating zero, so in order to +pass a string of length 8 to &VIDIOC-S-EXT-CTRLS; you need to set the +size field of &v4l2-ext-control; to 9. For &VIDIOC-G-EXT-CTRLS; you can +set the size field to maximum + 1. +Which character encoding is used will depend on the string control itself and +should be part of the control documentation. + + + V4L2_CTRL_TYPE_CTRL_CLASS + n/a + n/a + n/a + This is not a control. When +VIDIOC_QUERYCTRL is called with a control ID +equal to a control class code (see ), the +ioctl returns the name of the control class and this control type. +Older drivers which do not support this feature return an +&EINVAL;. + + + +
+ + + Control Flags + + &cs-def; + + + V4L2_CTRL_FLAG_DISABLED + 0x0001 + This control is permanently disabled and should be +ignored by the application. Any attempt to change the control will +result in an &EINVAL;. + + + V4L2_CTRL_FLAG_GRABBED + 0x0002 + This control is temporarily unchangeable, for +example because another application took over control of the +respective resource. Such controls may be displayed specially in a +user interface. Attempts to change the control may result in an +&EBUSY;. + + + V4L2_CTRL_FLAG_READ_ONLY + 0x0004 + This control is permanently readable only. Any +attempt to change the control will result in an &EINVAL;. + + + V4L2_CTRL_FLAG_UPDATE + 0x0008 + A hint that changing this control may affect the +value of other controls within the same control class. Applications +should update their user interface accordingly. + + + V4L2_CTRL_FLAG_INACTIVE + 0x0010 + This control is not applicable to the current +configuration and should be displayed accordingly in a user interface. +For example the flag may be set on a MPEG audio level 2 bitrate +control when MPEG audio encoding level 1 was selected with another +control. + + + V4L2_CTRL_FLAG_SLIDER + 0x0020 + A hint that this control is best represented as a +slider-like element in a user interface. + + + V4L2_CTRL_FLAG_WRITE_ONLY + 0x0040 + This control is permanently writable only. Any +attempt to read the control will result in an &EACCES; error code. This +flag is typically present for relative controls or action controls where +writing a value will cause the device to carry out a given action +(⪚ motor control) but no meaningful value can be returned. + + + +
+ + + + &return-value; + + + + EINVAL + + The &v4l2-queryctrl; id +is invalid. The &v4l2-querymenu; id or +index is invalid. + + + + EACCES + + An attempt was made to read a write-only control. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-querystd.xml b/Documentation/DocBook/v4l/vidioc-querystd.xml new file mode 100644 index 00000000000..b5a7ff93448 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-querystd.xml @@ -0,0 +1,83 @@ + + + ioctl VIDIOC_QUERYSTD + &manvol; + + + + VIDIOC_QUERYSTD + Sense the video standard received by the current +input + + + + + + int ioctl + int fd + int request + v4l2_std_id *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_QUERYSTD + + + + argp + + + + + + + + + Description + + The hardware may be able to detect the current video +standard automatically. To do so, applications call +VIDIOC_QUERYSTD with a pointer to a &v4l2-std-id; type. The +driver stores here a set of candidates, this can be a single flag or a +set of supported standards if for example the hardware can only +distinguish between 50 and 60 Hz systems. When detection is not +possible or fails, the set must contain all standards supported by the +current video input or output. + + + + + &return-value; + + + + EINVAL + + This ioctl is not supported. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-reqbufs.xml b/Documentation/DocBook/v4l/vidioc-reqbufs.xml new file mode 100644 index 00000000000..bab38084454 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-reqbufs.xml @@ -0,0 +1,160 @@ + + + ioctl VIDIOC_REQBUFS + &manvol; + + + + VIDIOC_REQBUFS + Initiate Memory Mapping or User Pointer I/O + + + + + + int ioctl + int fd + int request + struct v4l2_requestbuffers *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_REQBUFS + + + + argp + + + + + + + + + Description + + This ioctl is used to initiate memory +mapped or user pointer +I/O. Memory mapped buffers are located in device memory and must be +allocated with this ioctl before they can be mapped into the +application's address space. User buffers are allocated by +applications themselves, and this ioctl is merely used to switch the +driver into user pointer I/O mode. + + To allocate device buffers applications initialize three +fields of a v4l2_requestbuffers structure. +They set the type field to the respective +stream or buffer type, the count field to +the desired number of buffers, and memory +must be set to V4L2_MEMORY_MMAP. When the ioctl +is called with a pointer to this structure the driver attempts to +allocate the requested number of buffers and stores the actual number +allocated in the count field. It can be +smaller than the number requested, even zero, when the driver runs out +of free memory. A larger number is possible when the driver requires +more buffers to function correctly. + For example video output requires at least two buffers, +one displayed and one filled by the application. + When memory mapping I/O is not supported the ioctl +returns an &EINVAL;. + + Applications can call VIDIOC_REQBUFS +again to change the number of buffers, however this cannot succeed +when any buffers are still mapped. A count +value of zero frees all buffers, after aborting or finishing any DMA +in progress, an implicit &VIDIOC-STREAMOFF;. + + To negotiate user pointer I/O, applications initialize only +the type field and set +memory to +V4L2_MEMORY_USERPTR. When the ioctl is called +with a pointer to this structure the driver prepares for user pointer +I/O, when this I/O method is not supported the ioctl returns an +&EINVAL;. + + + struct <structname>v4l2_requestbuffers</structname> + + &cs-str; + + + __u32 + count + The number of buffers requested or granted. This +field is only used when memory is set to +V4L2_MEMORY_MMAP. + + + &v4l2-buf-type; + type + Type of the stream or buffers, this is the same +as the &v4l2-format; type field. See for valid values. + + + &v4l2-memory; + memory + Applications set this field to +V4L2_MEMORY_MMAP or +V4L2_MEMORY_USERPTR. + + + __u32 + reserved[2] + A place holder for future extensions and custom +(driver defined) buffer types V4L2_BUF_TYPE_PRIVATE and +higher. + + + +
+ + + + &return-value; + + + + EBUSY + + The driver supports multiple opens and I/O is already +in progress, or reallocation of buffers was attempted although one or +more are still mapped. + + + + EINVAL + + The buffer type (type field) or the +requested I/O method (memory) is not +supported. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml new file mode 100644 index 00000000000..14b3ec7ed75 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml @@ -0,0 +1,129 @@ + + + ioctl VIDIOC_S_HW_FREQ_SEEK + &manvol; + + + + VIDIOC_S_HW_FREQ_SEEK + Perform a hardware frequency seek + + + + + + int ioctl + int fd + int request + struct v4l2_hw_freq_seek +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_S_HW_FREQ_SEEK + + + + argp + + + + + + + + + Description + + Start a hardware frequency seek from the current frequency. +To do this applications initialize the tuner, +type, seek_upward and +wrap_around fields, and zero out the +reserved array of a &v4l2-hw-freq-seek; and +call the VIDIOC_S_HW_FREQ_SEEK ioctl with a pointer +to this structure. + + This ioctl is supported if the V4L2_CAP_HW_FREQ_SEEK capability is set. + + + struct <structname>v4l2_hw_freq_seek</structname> + + &cs-str; + + + __u32 + tuner + The tuner index number. This is the +same value as in the &v4l2-input; tuner +field and the &v4l2-tuner; index field. + + + &v4l2-tuner-type; + type + The tuner type. This is the same value as in the +&v4l2-tuner; type field. + + + __u32 + seek_upward + If non-zero, seek upward from the current frequency, else seek downward. + + + __u32 + wrap_around + If non-zero, wrap around when at the end of the frequency range, else stop seeking. + + + __u32 + reserved[8] + Reserved for future extensions. Drivers and + applications must set the array to zero. + + + +
+ + + + &return-value; + + + + EINVAL + + The tuner index is out of +bounds or the value in the type field is +wrong. + + + + EAGAIN + + The ioctl timed-out. Try again. + + + + + + + diff --git a/Documentation/DocBook/v4l/vidioc-streamon.xml b/Documentation/DocBook/v4l/vidioc-streamon.xml new file mode 100644 index 00000000000..e42bff1f2c0 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-streamon.xml @@ -0,0 +1,106 @@ + + + ioctl VIDIOC_STREAMON, VIDIOC_STREAMOFF + &manvol; + + + + VIDIOC_STREAMON + VIDIOC_STREAMOFF + Start or stop streaming I/O + + + + + + int ioctl + int fd + int request + const int *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_STREAMON, VIDIOC_STREAMOFF + + + + argp + + + + + + + + + Description + + The VIDIOC_STREAMON and +VIDIOC_STREAMOFF ioctl start and stop the capture +or output process during streaming (memory +mapping or user pointer) I/O. + + Specifically the capture hardware is disabled and no input +buffers are filled (if there are any empty buffers in the incoming +queue) until VIDIOC_STREAMON has been called. +Accordingly the output hardware is disabled, no video signal is +produced until VIDIOC_STREAMON has been called. +The ioctl will succeed only when at least one output buffer is in the +incoming queue. + + The VIDIOC_STREAMOFF ioctl, apart of +aborting or finishing any DMA in progress, unlocks any user pointer +buffers locked in physical memory, and it removes all buffers from the +incoming and outgoing queues. That means all images captured but not +dequeued yet will be lost, likewise all images enqueued for output but +not transmitted yet. I/O returns to the same state as after calling +&VIDIOC-REQBUFS; and can be restarted accordingly. + + Both ioctls take a pointer to an integer, the desired buffer or +stream type. This is the same as &v4l2-requestbuffers; +type. + + Note applications can be preempted for unknown periods right +before or after the VIDIOC_STREAMON or +VIDIOC_STREAMOFF calls, there is no notion of +starting or stopping "now". Buffer timestamps can be used to +synchronize with other events. + + + + &return-value; + + + + EINVAL + + Streaming I/O is not supported, the buffer +type is not supported, or no buffers have +been allocated (memory mapping) or enqueued (output) yet. + + + + + + + -- cgit v1.2.3-70-g09d2 From d80bd70f0833582328f1df8d69322067fd1891c2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 15 Sep 2009 15:27:57 -0300 Subject: DocBook/media: renamed xml documents to tmpl DocBook makefile expects that the documents to be in tmpl extension, since it has some preprocessing that it is done on it. This preprocessing is not needed currently, but, as it removes the xml versions, we're forced to rename anyway. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media-entities.tmpl | 363 ++++++++++++++++++++++++++++++ Documentation/DocBook/media-entities.xml | 363 ------------------------------ Documentation/DocBook/media-indices.tmpl | 85 +++++++ Documentation/DocBook/media-indices.xml | 85 ------- Documentation/DocBook/media.tmpl | 112 +++++++++ Documentation/DocBook/media.xml | 112 --------- 6 files changed, 560 insertions(+), 560 deletions(-) create mode 100644 Documentation/DocBook/media-entities.tmpl delete mode 100644 Documentation/DocBook/media-entities.xml create mode 100644 Documentation/DocBook/media-indices.tmpl delete mode 100644 Documentation/DocBook/media-indices.xml create mode 100644 Documentation/DocBook/media.tmpl delete mode 100644 Documentation/DocBook/media.xml (limited to 'Documentation') diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl new file mode 100644 index 00000000000..944087b5733 --- /dev/null +++ b/Documentation/DocBook/media-entities.tmpl @@ -0,0 +1,363 @@ + + + +close()"> +ioctl()"> +mmap()"> +munmap()"> +open()"> +poll()"> +read()"> +select()"> +write()"> + + +VIDIOC_CROPCAP"> +VIDIOC_DBG_G_CHIP_IDENT"> +VIDIOC_DBG_G_REGISTER"> +VIDIOC_DBG_S_REGISTER"> +VIDIOC_DQBUF"> +VIDIOC_ENCODER_CMD"> +VIDIOC_ENUMAUDIO"> +VIDIOC_ENUMAUDOUT"> +VIDIOC_ENUMINPUT"> +VIDIOC_ENUMOUTPUT"> +VIDIOC_ENUMSTD"> +VIDIOC_ENUM_FMT"> +VIDIOC_ENUM_FRAMEINTERVALS"> +VIDIOC_ENUM_FRAMESIZES"> +VIDIOC_G_AUDIO"> +VIDIOC_G_AUDOUT"> +VIDIOC_G_CROP"> +VIDIOC_G_CTRL"> +VIDIOC_G_ENC_INDEX"> +VIDIOC_G_EXT_CTRLS"> +VIDIOC_G_FBUF"> +VIDIOC_G_FMT"> +VIDIOC_G_FREQUENCY"> +VIDIOC_G_INPUT"> +VIDIOC_G_JPEGCOMP"> +VIDIOC_G_MPEGCOMP"> +VIDIOC_G_MODULATOR"> +VIDIOC_G_OUTPUT"> +VIDIOC_G_PARM"> +VIDIOC_G_PRIORITY"> +VIDIOC_G_SLICED_VBI_CAP"> +VIDIOC_G_STD"> +VIDIOC_G_TUNER"> +VIDIOC_LOG_STATUS"> +VIDIOC_OVERLAY"> +VIDIOC_QBUF"> +VIDIOC_QUERYBUF"> +VIDIOC_QUERYCAP"> +VIDIOC_QUERYCTRL"> +VIDIOC_QUERYMENU"> +VIDIOC_QUERYSTD"> +VIDIOC_REQBUFS"> +VIDIOC_STREAMOFF"> +VIDIOC_STREAMON"> +VIDIOC_S_AUDIO"> +VIDIOC_S_AUDOUT"> +VIDIOC_S_CROP"> +VIDIOC_S_CTRL"> +VIDIOC_S_EXT_CTRLS"> +VIDIOC_S_FBUF"> +VIDIOC_S_FMT"> +VIDIOC_S_FREQUENCY"> +VIDIOC_S_HW_FREQ_SEEK"> +VIDIOC_S_INPUT"> +VIDIOC_S_JPEGCOMP"> +VIDIOC_S_MPEGCOMP"> +VIDIOC_S_MODULATOR"> +VIDIOC_S_OUTPUT"> +VIDIOC_S_PARM"> +VIDIOC_S_PRIORITY"> +VIDIOC_S_STD"> +VIDIOC_S_TUNER"> +VIDIOC_TRY_ENCODER_CMD"> +VIDIOC_TRY_EXT_CTRLS"> +VIDIOC_TRY_FMT"> + + +v4l2_std_id"> + + +v4l2_buf_type"> +v4l2_colorspace"> +v4l2_ctrl_type"> +v4l2_exposure_auto_type"> +v4l2_field"> +v4l2_frmivaltypes"> +v4l2_frmsizetypes"> +v4l2_memory"> +v4l2_mpeg_audio_ac3_bitrate"> +v4l2_mpeg_audio_crc"> +v4l2_mpeg_audio_emphasis"> +v4l2_mpeg_audio_encoding"> +v4l2_mpeg_audio_l1_bitrate"> +v4l2_mpeg_audio_l2_bitrate"> +v4l2_mpeg_audio_l3_bitrate"> +v4l2_mpeg_audio_mode"> +v4l2_mpeg_audio_mode_extension"> +v4l2_mpeg_audio_sampling_freq"> +v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type"> +v4l2_mpeg_cx2341x_video_luma_spatial_filter_type"> +v4l2_mpeg_cx2341x_video_median_filter_type"> +v4l2_mpeg_cx2341x_video_spatial_filter_mode"> +v4l2_mpeg_cx2341x_video_temporal_filter_mode"> +v4l2_mpeg_stream_type"> +v4l2_mpeg_stream_vbi_fmt"> +v4l2_mpeg_video_aspect"> +v4l2_mpeg_video_bitrate_mode"> +v4l2_mpeg_video_encoding"> +v4l2_power_line_frequency"> +v4l2_priority"> +v4l2_tuner_type"> +v4l2_preemphasis"> + + +v4l2_audio"> +v4l2_audioout"> +v4l2_buffer"> +v4l2_capability"> +v4l2_captureparm"> +v4l2_clip"> +v4l2_control"> +v4l2_crop"> +v4l2_cropcap"> +v4l2_dbg_chip_ident"> +v4l2_dbg_match"> +v4l2_dbg_register"> +v4l2_enc_idx"> +v4l2_enc_idx_entry"> +v4l2_encoder_cmd"> +v4l2_ext_control"> +v4l2_ext_controls"> +v4l2_fmtdesc"> +v4l2_format"> +v4l2_fract"> +v4l2_framebuffer"> +v4l2_frequency"> +v4l2_frmival_stepwise"> +v4l2_frmivalenum"> +v4l2_frmsize_discrete"> +v4l2_frmsize_stepwise"> +v4l2_frmsizeenum"> +v4l2_hw_freq_seek"> +v4l2_input"> +v4l2_jpegcompression"> +v4l2_modulator"> +v4l2_mpeg_vbi_fmt_ivtv"> +v4l2_output"> +v4l2_outputparm"> +v4l2_pix_format"> +v4l2_queryctrl"> +v4l2_querymenu"> +v4l2_rect"> +v4l2_requestbuffers"> +v4l2_sliced_vbi_cap"> +v4l2_sliced_vbi_data"> +v4l2_sliced_vbi_format"> +v4l2_standard"> +v4l2_streamparm"> +v4l2_timecode"> +v4l2_tuner"> +v4l2_vbi_format"> +v4l2_window"> + + +EACCES error code"> +EAGAIN error code"> +EBADF error code"> +EBUSY error code"> +EFAULT error code"> +EIO error code"> +EINTR error code"> +EINVAL error code"> +ENFILE error code"> +ENOMEM error code"> +ENOSPC error code"> +ENOTTY error code"> +ENXIO error code"> +EMFILE error code"> +EPERM error code"> +ERANGE error code"> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Documentation/DocBook/media-entities.xml b/Documentation/DocBook/media-entities.xml deleted file mode 100644 index f5d59838ad3..00000000000 --- a/Documentation/DocBook/media-entities.xml +++ /dev/null @@ -1,363 +0,0 @@ - - - -close()"> -ioctl()"> -mmap()"> -munmap()"> -open()"> -poll()"> -read()"> -select()"> -write()"> - - -VIDIOC_CROPCAP"> -VIDIOC_DBG_G_CHIP_IDENT"> -VIDIOC_DBG_G_REGISTER"> -VIDIOC_DBG_S_REGISTER"> -VIDIOC_DQBUF"> -VIDIOC_ENCODER_CMD"> -VIDIOC_ENUMAUDIO"> -VIDIOC_ENUMAUDOUT"> -VIDIOC_ENUMINPUT"> -VIDIOC_ENUMOUTPUT"> -VIDIOC_ENUMSTD"> -VIDIOC_ENUM_FMT"> -VIDIOC_ENUM_FRAMEINTERVALS"> -VIDIOC_ENUM_FRAMESIZES"> -VIDIOC_G_AUDIO"> -VIDIOC_G_AUDOUT"> -VIDIOC_G_CROP"> -VIDIOC_G_CTRL"> -VIDIOC_G_ENC_INDEX"> -VIDIOC_G_EXT_CTRLS"> -VIDIOC_G_FBUF"> -VIDIOC_G_FMT"> -VIDIOC_G_FREQUENCY"> -VIDIOC_G_INPUT"> -VIDIOC_G_JPEGCOMP"> -VIDIOC_G_MPEGCOMP"> -VIDIOC_G_MODULATOR"> -VIDIOC_G_OUTPUT"> -VIDIOC_G_PARM"> -VIDIOC_G_PRIORITY"> -VIDIOC_G_SLICED_VBI_CAP"> -VIDIOC_G_STD"> -VIDIOC_G_TUNER"> -VIDIOC_LOG_STATUS"> -VIDIOC_OVERLAY"> -VIDIOC_QBUF"> -VIDIOC_QUERYBUF"> -VIDIOC_QUERYCAP"> -VIDIOC_QUERYCTRL"> -VIDIOC_QUERYMENU"> -VIDIOC_QUERYSTD"> -VIDIOC_REQBUFS"> -VIDIOC_STREAMOFF"> -VIDIOC_STREAMON"> -VIDIOC_S_AUDIO"> -VIDIOC_S_AUDOUT"> -VIDIOC_S_CROP"> -VIDIOC_S_CTRL"> -VIDIOC_S_EXT_CTRLS"> -VIDIOC_S_FBUF"> -VIDIOC_S_FMT"> -VIDIOC_S_FREQUENCY"> -VIDIOC_S_HW_FREQ_SEEK"> -VIDIOC_S_INPUT"> -VIDIOC_S_JPEGCOMP"> -VIDIOC_S_MPEGCOMP"> -VIDIOC_S_MODULATOR"> -VIDIOC_S_OUTPUT"> -VIDIOC_S_PARM"> -VIDIOC_S_PRIORITY"> -VIDIOC_S_STD"> -VIDIOC_S_TUNER"> -VIDIOC_TRY_ENCODER_CMD"> -VIDIOC_TRY_EXT_CTRLS"> -VIDIOC_TRY_FMT"> - - -v4l2_std_id"> - - -v4l2_buf_type"> -v4l2_colorspace"> -v4l2_ctrl_type"> -v4l2_exposure_auto_type"> -v4l2_field"> -v4l2_frmivaltypes"> -v4l2_frmsizetypes"> -v4l2_memory"> -v4l2_mpeg_audio_ac3_bitrate"> -v4l2_mpeg_audio_crc"> -v4l2_mpeg_audio_emphasis"> -v4l2_mpeg_audio_encoding"> -v4l2_mpeg_audio_l1_bitrate"> -v4l2_mpeg_audio_l2_bitrate"> -v4l2_mpeg_audio_l3_bitrate"> -v4l2_mpeg_audio_mode"> -v4l2_mpeg_audio_mode_extension"> -v4l2_mpeg_audio_sampling_freq"> -v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type"> -v4l2_mpeg_cx2341x_video_luma_spatial_filter_type"> -v4l2_mpeg_cx2341x_video_median_filter_type"> -v4l2_mpeg_cx2341x_video_spatial_filter_mode"> -v4l2_mpeg_cx2341x_video_temporal_filter_mode"> -v4l2_mpeg_stream_type"> -v4l2_mpeg_stream_vbi_fmt"> -v4l2_mpeg_video_aspect"> -v4l2_mpeg_video_bitrate_mode"> -v4l2_mpeg_video_encoding"> -v4l2_power_line_frequency"> -v4l2_priority"> -v4l2_tuner_type"> -v4l2_preemphasis"> - - -v4l2_audio"> -v4l2_audioout"> -v4l2_buffer"> -v4l2_capability"> -v4l2_captureparm"> -v4l2_clip"> -v4l2_control"> -v4l2_crop"> -v4l2_cropcap"> -v4l2_dbg_chip_ident"> -v4l2_dbg_match"> -v4l2_dbg_register"> -v4l2_enc_idx"> -v4l2_enc_idx_entry"> -v4l2_encoder_cmd"> -v4l2_ext_control"> -v4l2_ext_controls"> -v4l2_fmtdesc"> -v4l2_format"> -v4l2_fract"> -v4l2_framebuffer"> -v4l2_frequency"> -v4l2_frmival_stepwise"> -v4l2_frmivalenum"> -v4l2_frmsize_discrete"> -v4l2_frmsize_stepwise"> -v4l2_frmsizeenum"> -v4l2_hw_freq_seek"> -v4l2_input"> -v4l2_jpegcompression"> -v4l2_modulator"> -v4l2_mpeg_vbi_fmt_ivtv"> -v4l2_output"> -v4l2_outputparm"> -v4l2_pix_format"> -v4l2_queryctrl"> -v4l2_querymenu"> -v4l2_rect"> -v4l2_requestbuffers"> -v4l2_sliced_vbi_cap"> -v4l2_sliced_vbi_data"> -v4l2_sliced_vbi_format"> -v4l2_standard"> -v4l2_streamparm"> -v4l2_timecode"> -v4l2_tuner"> -v4l2_vbi_format"> -v4l2_window"> - - -EACCES error code"> -EAGAIN error code"> -EBADF error code"> -EBUSY error code"> -EFAULT error code"> -EIO error code"> -EINTR error code"> -EINVAL error code"> -ENFILE error code"> -ENOMEM error code"> -ENOSPC error code"> -ENOTTY error code"> -ENXIO error code"> -EMFILE error code"> -EPERM error code"> -ERANGE error code"> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/Documentation/DocBook/media-indices.tmpl b/Documentation/DocBook/media-indices.tmpl new file mode 100644 index 00000000000..9e30a236d74 --- /dev/null +++ b/Documentation/DocBook/media-indices.tmpl @@ -0,0 +1,85 @@ + + +List of Types +v4l2_std_id +enum v4l2_buf_type +enum v4l2_colorspace +enum v4l2_ctrl_type +enum v4l2_exposure_auto_type +enum v4l2_field +enum v4l2_frmivaltypes +enum v4l2_frmsizetypes +enum v4l2_memory +enum v4l2_mpeg_audio_ac3_bitrate +enum v4l2_mpeg_audio_crc +enum v4l2_mpeg_audio_emphasis +enum v4l2_mpeg_audio_encoding +enum v4l2_mpeg_audio_l1_bitrate +enum v4l2_mpeg_audio_l2_bitrate +enum v4l2_mpeg_audio_l3_bitrate +enum v4l2_mpeg_audio_mode +enum v4l2_mpeg_audio_mode_extension +enum v4l2_mpeg_audio_sampling_freq +enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type +enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type +enum v4l2_mpeg_cx2341x_video_median_filter_type +enum v4l2_mpeg_cx2341x_video_spatial_filter_mode +enum v4l2_mpeg_cx2341x_video_temporal_filter_mode +enum v4l2_mpeg_stream_type +enum v4l2_mpeg_stream_vbi_fmt +enum v4l2_mpeg_video_aspect +enum v4l2_mpeg_video_bitrate_mode +enum v4l2_mpeg_video_encoding +enum v4l2_power_line_frequency +enum v4l2_priority +enum v4l2_tuner_type +enum v4l2_preemphasis +struct v4l2_audio +struct v4l2_audioout +struct v4l2_buffer +struct v4l2_capability +struct v4l2_captureparm +struct v4l2_clip +struct v4l2_control +struct v4l2_crop +struct v4l2_cropcap +struct v4l2_dbg_chip_ident +struct v4l2_dbg_match +struct v4l2_dbg_register +struct v4l2_enc_idx +struct v4l2_enc_idx_entry +struct v4l2_encoder_cmd +struct v4l2_ext_control +struct v4l2_ext_controls +struct v4l2_fmtdesc +struct v4l2_format +struct v4l2_fract +struct v4l2_framebuffer +struct v4l2_frequency +struct v4l2_frmival_stepwise +struct v4l2_frmivalenum +struct v4l2_frmsize_discrete +struct v4l2_frmsize_stepwise +struct v4l2_frmsizeenum +struct v4l2_hw_freq_seek +struct v4l2_input +struct v4l2_jpegcompression +struct v4l2_modulator +struct v4l2_mpeg_vbi_fmt_ivtv +struct v4l2_output +struct v4l2_outputparm +struct v4l2_pix_format +struct v4l2_queryctrl +struct v4l2_querymenu +struct v4l2_rect +struct v4l2_requestbuffers +struct v4l2_sliced_vbi_cap +struct v4l2_sliced_vbi_data +struct v4l2_sliced_vbi_format +struct v4l2_standard +struct v4l2_streamparm +struct v4l2_timecode +struct v4l2_tuner +struct v4l2_vbi_format +struct v4l2_window + diff --git a/Documentation/DocBook/media-indices.xml b/Documentation/DocBook/media-indices.xml deleted file mode 100644 index 9e30a236d74..00000000000 --- a/Documentation/DocBook/media-indices.xml +++ /dev/null @@ -1,85 +0,0 @@ - - -List of Types -v4l2_std_id -enum v4l2_buf_type -enum v4l2_colorspace -enum v4l2_ctrl_type -enum v4l2_exposure_auto_type -enum v4l2_field -enum v4l2_frmivaltypes -enum v4l2_frmsizetypes -enum v4l2_memory -enum v4l2_mpeg_audio_ac3_bitrate -enum v4l2_mpeg_audio_crc -enum v4l2_mpeg_audio_emphasis -enum v4l2_mpeg_audio_encoding -enum v4l2_mpeg_audio_l1_bitrate -enum v4l2_mpeg_audio_l2_bitrate -enum v4l2_mpeg_audio_l3_bitrate -enum v4l2_mpeg_audio_mode -enum v4l2_mpeg_audio_mode_extension -enum v4l2_mpeg_audio_sampling_freq -enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type -enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type -enum v4l2_mpeg_cx2341x_video_median_filter_type -enum v4l2_mpeg_cx2341x_video_spatial_filter_mode -enum v4l2_mpeg_cx2341x_video_temporal_filter_mode -enum v4l2_mpeg_stream_type -enum v4l2_mpeg_stream_vbi_fmt -enum v4l2_mpeg_video_aspect -enum v4l2_mpeg_video_bitrate_mode -enum v4l2_mpeg_video_encoding -enum v4l2_power_line_frequency -enum v4l2_priority -enum v4l2_tuner_type -enum v4l2_preemphasis -struct v4l2_audio -struct v4l2_audioout -struct v4l2_buffer -struct v4l2_capability -struct v4l2_captureparm -struct v4l2_clip -struct v4l2_control -struct v4l2_crop -struct v4l2_cropcap -struct v4l2_dbg_chip_ident -struct v4l2_dbg_match -struct v4l2_dbg_register -struct v4l2_enc_idx -struct v4l2_enc_idx_entry -struct v4l2_encoder_cmd -struct v4l2_ext_control -struct v4l2_ext_controls -struct v4l2_fmtdesc -struct v4l2_format -struct v4l2_fract -struct v4l2_framebuffer -struct v4l2_frequency -struct v4l2_frmival_stepwise -struct v4l2_frmivalenum -struct v4l2_frmsize_discrete -struct v4l2_frmsize_stepwise -struct v4l2_frmsizeenum -struct v4l2_hw_freq_seek -struct v4l2_input -struct v4l2_jpegcompression -struct v4l2_modulator -struct v4l2_mpeg_vbi_fmt_ivtv -struct v4l2_output -struct v4l2_outputparm -struct v4l2_pix_format -struct v4l2_queryctrl -struct v4l2_querymenu -struct v4l2_rect -struct v4l2_requestbuffers -struct v4l2_sliced_vbi_cap -struct v4l2_sliced_vbi_data -struct v4l2_sliced_vbi_format -struct v4l2_standard -struct v4l2_streamparm -struct v4l2_timecode -struct v4l2_tuner -struct v4l2_vbi_format -struct v4l2_window - diff --git a/Documentation/DocBook/media.tmpl b/Documentation/DocBook/media.tmpl new file mode 100644 index 00000000000..eea564bb12c --- /dev/null +++ b/Documentation/DocBook/media.tmpl @@ -0,0 +1,112 @@ + + %media-entities; + + + + +open()."> +2C"> +Return ValueOn success 0 is returned, on error -1 and the errno variable is set appropriately:"> +2"> + + +"> +"> +"> + + +http://www.linuxtv.org/lists.php"> + + +http://linuxtv.org/repo/"> +]> + + + +LINUX MEDIA INFRASTRUCTURE API + + + 2009 + LinuxTV Developers + + + + +Permission is granted to copy, distribute and/or modify +this document under the terms of the GNU Free Documentation License, +Version 1.1 or any later version published by the Free Software +Foundation. A copy of the license is included in the chapter entitled +"GNU Free Documentation License" + + + + + + + + Introduction + + This document covers the Linux Kernel to Userspace API's used by + video and radio straming devices, including video cameras, + analog and digital TV receiver cards, AM/FM receiver cards, + streaming capture devices. + It is divided into three parts. + The first part covers radio, capture, + cameras and analog TV devices. + The second part covers the + API used for digital TV and Internet reception via one of the + several digital tv standards. While it is called as DVB API, + in fact it covers several different video standards including + DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated + to documment support also for DVB-S2, ISDB-T and ISDB-S. + The third part covers other API's used by all media infrastructure devices + For additional information and for the latest development code, + see: http://linuxtv.org. + For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: Linux Media Mailing List (LMML).. + + + + +&sub-v4l2; + + +&sub-dvbapi; + + + + + +Mauro +Chehab +Carvalho +
mchehab@redhat.com
 +Initial version. + + + + 2009 + Mauro Carvalho Chehab + + + + + +1.0.0 +2009-09-06 +mcc +Initial revision + + + + +Other API's used by media infrastructure drivers + +&sub-remote_controllers; + + + +&sub-fdl-appendix; + + diff --git a/Documentation/DocBook/media.xml b/Documentation/DocBook/media.xml deleted file mode 100644 index 14302589d55..00000000000 --- a/Documentation/DocBook/media.xml +++ /dev/null @@ -1,112 +0,0 @@ - - %media-entities; - - - - -open()."> -2C"> -Return ValueOn success 0 is returned, on error -1 and the errno variable is set appropriately:"> -2"> - - -"> -"> -"> - - -http://www.linuxtv.org/lists.php"> - - -http://linuxtv.org/repo/"> -]> - - - -LINUX MEDIA INFRASTRUCTURE API - - - 2009 - LinuxTV Developers - - - - -Permission is granted to copy, distribute and/or modify -this document under the terms of the GNU Free Documentation License, -Version 1.1 or any later version published by the Free Software -Foundation. A copy of the license is included in the chapter entitled -"GNU Free Documentation License" - - - - - - - - Introduction - - This document covers the Linux Kernel to Userspace API's used by - video and radio straming devices, including video cameras, - analog and digital TV receiver cards, AM/FM receiver cards, - streaming capture devices. - It is divided into three parts. - The first part covers radio, capture, - cameras and analog TV devices. - The second part covers the - API used for digital TV and Internet reception via one of the - several digital tv standards. While it is called as DVB API, - in fact it covers several different video standards including - DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated - to documment support also for DVB-S2, ISDB-T and ISDB-S. - The third part covers other API's used by all media infrastructure devices - For additional information and for the latest development code, - see: http://linuxtv.org. - For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: Linux Media Mailing List (LMML).. - - - - -&sub-v4l2; - - -&sub-dvbapi; - - - - - -Mauro -Chehab -Carvalho -
mchehab@redhat.com
 -Initial version. - - - - 2009 - Mauro Carvalho Chehab - - - - - -1.0.0 -2009-09-06 -mcc -Initial revision - - - - -Other API's used by media infrastructure drivers - -&sub-remote_controllers; - - - -&sub-fdl-appendix; - - -- cgit v1.2.3-70-g09d2 From 7ac9405570def8267df08d1c561d7e00b2b766b7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 15 Sep 2009 18:46:15 -0300 Subject: DocBook/media: copy also the pictures to the proper place Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/Makefile | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index ad07875febc..ab8300f6718 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -32,7 +32,7 @@ PS_METHOD = $(prefer-db2x) ### # The targets that may be used. -PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs +PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs media BOOKS := $(addprefix $(obj)/,$(DOCBOOKS)) xmldocs: $(BOOKS) @@ -45,12 +45,16 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS)) pdfdocs: $(PDF) HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS))) -htmldocs: $(HTML) +htmldocs: media $(HTML) $(call build_main_index) MAN := $(patsubst %.xml, %.9, $(BOOKS)) mandocs: $(MAN) +media: + mkdir -p $(srctree)/Documentation/DocBook/media/ + cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(srctree)/Documentation/DocBook/media/ + installmandocs: mandocs mkdir -p /usr/local/man/man9/ install Documentation/DocBook/man/*.9.gz /usr/local/man/man9/ -- cgit v1.2.3-70-g09d2 From b131e04eae22e653efc3b9b6a861faa10e4894b8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 15 Sep 2009 19:49:44 -0300 Subject: DocBook: Don't use graphics callouts By default, when a callout is used, DocBook will try to use a graphics image for callouts. This requires that the graphics to be copied to the documentation directory. As this is not done, use the text callouts: (1), (2), ... Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/stylesheet.xsl | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/DocBook/stylesheet.xsl b/Documentation/DocBook/stylesheet.xsl index 974e17ccf10..254c1d5d2e5 100644 --- a/Documentation/DocBook/stylesheet.xsl +++ b/Documentation/DocBook/stylesheet.xsl @@ -3,6 +3,7 @@ 1 ansi 80 +0 2 -- cgit v1.2.3-70-g09d2 From 9aa08855a47a7d25e231457f893af6f5ab903870 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 15 Sep 2009 20:27:18 -0300 Subject: DocBook/media: Some typo fixes Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/v4l/capture.c.xml | 4 ++-- Documentation/DocBook/v4l/common.xml | 2 +- Documentation/DocBook/v4l/remote_controllers.xml | 9 +++++++-- 3 files changed, 10 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/v4l/capture.c.xml b/Documentation/DocBook/v4l/capture.c.xml index acf46b6dac2..1c5c49a2de5 100644 --- a/Documentation/DocBook/v4l/capture.c.xml +++ b/Documentation/DocBook/v4l/capture.c.xml @@ -4,8 +4,8 @@ * * This program can be used and distributed without restrictions. * - * This program were got from V4L2 API, Draft 0.20 - * available at: http://v4l2spec.bytesex.org/ + * This program is provided with the V4L2 API + * see http://linuxtv.org/docs.php for more information */ #include <stdio.h> diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml index dd598ac9a45..d6744b77e59 100644 --- a/Documentation/DocBook/v4l/common.xml +++ b/Documentation/DocBook/v4l/common.xml @@ -802,7 +802,7 @@ optional. a special ioctl to enumerate all image formats supported by video capture, overlay or output devices is available. Enumerating formats an application has no a-priori -knowledge of (otherwise it could explicitely ask for them and need not +knowledge of (otherwise it could explicitly ask for them and need not enumerate) seems useless, but there are applications serving as proxy between drivers and the actual video applications for which this is useful. diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/v4l/remote_controllers.xml index eb669537a64..985325cbc9a 100644 --- a/Documentation/DocBook/v4l/remote_controllers.xml +++ b/Documentation/DocBook/v4l/remote_controllers.xml @@ -2,8 +2,13 @@
Introduction -Currently, most analog and digital devices have a Infrared input for remote controllers. Each manufacturer has their own type of control. It is not rare that the same manufacturer to ship different types of controls, depending on the device. -Unfortunately, during several years, there weren't any effort to uniform the IR keycodes under different boards. This resulted that the same IR keyname to be mapped completely different on different IR's. Due to that, V4L2 API now specifies a standard for mapping Media keys on IR. +Currently, most analog and digital devices have a Infrared input for remote controllers. Each +manufacturer has their own type of control. It is not rare for the same manufacturer to ship different +types of controls, depending on the device. +Unfortunately, for several years, there was no effort to create uniform IR keycodes for +different devices. This caused the same IR keyname to be mapped completely differently on +different IR devices. This resulted that the same IR keyname to be mapped completely different on +different IR's. Due to that, V4L2 API now specifies a standard for mapping Media keys on IR. This standard should be used by both V4L/DVB drivers and userspace applications The modules register the remote as keyboard within the linux input layer. This means that the IR key strokes will look like normal keyboard key strokes (if CONFIG_INPUT_KEYBOARD is enabled). Using the event devices (CONFIG_INPUT_EVDEV) it is possible for applications to access the remote via /dev/input/event devices. -- cgit v1.2.3-70-g09d2 From e5b20214e6628cc30d32b153640e230a4bfdea3b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 15 Sep 2009 20:49:43 -0300 Subject: DocBook/media: fix some broken links Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/v4l/dev-teletext.xml | 4 ++-- Documentation/DocBook/v4l/pixfmt.xml | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/v4l/dev-teletext.xml b/Documentation/DocBook/v4l/dev-teletext.xml index 59f9993e148..76184e8ed61 100644 --- a/Documentation/DocBook/v4l/dev-teletext.xml +++ b/Documentation/DocBook/v4l/dev-teletext.xml @@ -10,8 +10,8 @@ connected to the PC parallel port. The Teletext API was designed by Martin Buck. It is defined in the kernel header file linux/videotext.h, the -specification is available from -http://home.pages.de/~videotext/. (Videotext is the name of +specification is available from +ftp://ftp.gwdg.de/pub/linux/misc/videotext/. (Videotext is the name of the German public television Teletext service.) Conventional character device file names are /dev/vtx and /dev/vttuner, with device number 83, 0 and 83, 16 diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml index aaea55d4459..ebfbed03dbb 100644 --- a/Documentation/DocBook/v4l/pixfmt.xml +++ b/Documentation/DocBook/v4l/pixfmt.xml @@ -157,7 +157,7 @@ used in the Windows world. +http://www.poynton.com/notes/colour_and_gamma/ColorFAQ.html --> -- cgit v1.2.3-70-g09d2 From 62b122aba1ed96e2d4c7905bcf19fc8caf73dcd6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 15 Sep 2009 21:03:45 -0300 Subject: DocBook/media: update dvb url's and use ulink tag instead of emphasis Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/dvb/examples.xml | 2 +- Documentation/DocBook/dvb/frontend.xml | 4 ++-- Documentation/DocBook/dvb/intro.xml | 8 ++++---- 3 files changed, 7 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/dvb/examples.xml b/Documentation/DocBook/dvb/examples.xml index b89dceda604..f037e568eb6 100644 --- a/Documentation/DocBook/dvb/examples.xml +++ b/Documentation/DocBook/dvb/examples.xml @@ -2,7 +2,7 @@ In this section we would like to present some examples for using the DVB API. Maintainer note: This section is out of date. Please refer to the sample programs packaged -with the driver distribution from http://linuxtv.org/. +with the driver distribution from .
diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml index 91a749f70cb..028c9f23f0d 100644 --- a/Documentation/DocBook/dvb/frontend.xml +++ b/Documentation/DocBook/dvb/frontend.xml @@ -11,8 +11,8 @@ role="tt">linux/dvb/frontend.h in your application. is not yet handled by this API but a future extension is possible. For DVB-S the frontend device also supports satellite equipment control (SEC) via DiSEqC and V-SEC protocols. The DiSEqC (digital SEC) -specification is available from Eutelsat http://www.eutelsat.org/. +specification is available from +Eutelsat. Note that the DVB API may also be used for MPEG decoder-only PCI cards, in which case there exists no frontend device. diff --git a/Documentation/DocBook/dvb/intro.xml b/Documentation/DocBook/dvb/intro.xml index 83676c44e8a..0dc83f672ea 100644 --- a/Documentation/DocBook/dvb/intro.xml +++ b/Documentation/DocBook/dvb/intro.xml @@ -10,8 +10,8 @@ you should know what a program/transport stream (PS/TS) is and what is meant by a packetized elementary stream (PES) or an I-frame. Various DVB standards documents are available from -http://www.dvb.org/ and/or -http://www.etsi.org/. + and/or +. It is also necessary to know how to access unix/linux devices and how to use ioctl calls. This also includes the knowledge of C or C++. @@ -31,8 +31,8 @@ and filtering several section and PES data streams at the same time. In early 2000, we were approached by Nokia with a proposal for a new standard Linux DVB API. As a commitment to the development of terminals based on open standards, Nokia and Convergence made it -available to all Linux developers and published it on http://www.linuxtv.org/ in September 2000. +available to all Linux developers and published it on + in September 2000. Convergence is the maintainer of the Linux DVB API. Together with the LinuxTV community (i.e. you, the reader of this document), the Linux DVB API will be constantly reviewed and improved. With the Linux driver for -- cgit v1.2.3-70-g09d2 From fc27f04698275ed28e64ba615e60e4d716a11e42 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 15 Sep 2009 21:50:59 -0300 Subject: DocBook/media: Remove Satellites from Analog TV Tuners and Modulators There were never any satellite support for analog, and adding it right now doesn't make sense. For digital TV, this is already covered at part II. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/v4l/common.xml | 9 --------- 1 file changed, 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml index d6744b77e59..b1a81d246d5 100644 --- a/Documentation/DocBook/v4l/common.xml +++ b/Documentation/DocBook/v4l/common.xml @@ -506,15 +506,6 @@ are used for TV and radio devices alike. Drivers must support both ioctls when the tuner or modulator ioctls are supported, or when the device is a radio device.
- -
- Satellite Receivers - - To be discussed. See also -proposals by Peter Schlaf, video4linux-list@redhat.com on 23 Oct 2002, -subject: "Re: [V4L] Re: v4l2 api". -
-- cgit v1.2.3-70-g09d2 From b8423ee91ff250006907e58099450c923dc19c62 Mon Sep 17 00:00:00 2001 From: Uwe Bugla Date: Mon, 17 Aug 2009 08:09:06 -0300 Subject: V4L/DVB (12902): Documentation: synchronize documentation for Technisat cards The patch does the following: a. it synchronizes /Documentation/dvb/technisat.txt to the current kernel design b. it syncs Trent Piepho' s latest changes to the flexcop driver concept: implementation of the dvb pll library for some cards that need it Signed-off-by: Uwe Bugla Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- Documentation/dvb/technisat.txt | 75 +++++++++++++++++++++-------------------- 1 file changed, 39 insertions(+), 36 deletions(-) (limited to 'Documentation') diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt index 3f435ffb289..f0cc4f2d836 100644 --- a/Documentation/dvb/technisat.txt +++ b/Documentation/dvb/technisat.txt @@ -4,9 +4,12 @@ How to set up the Technisat/B2C2 Flexcop devices 1) Find out what device you have ================================ +Important Notice: The driver does NOT support Technisat USB 2 devices! + First start your linux box with a shipped kernel: lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: -02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02) +02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / + Technisat SkyStar2 DVB card (rev 02) dmesg | grep frontend may show you for example: DVB: registering frontend 0 (Conexant CX24123/CX24109)... @@ -14,62 +17,62 @@ DVB: registering frontend 0 (Conexant CX24123/CX24109)... 2) Kernel compilation: ====================== -If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one: -"Multimedia devices" => "Customise analog and hybrid tuner modules to build" -In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only). +If the Flexcop / Technisat is the only DVB / TV / Radio device in your box + get rid of unnecessary modules and check this one: +"Multimedia support" => "Customise analog and hybrid tuner modules to build" +In this directory uncheck every driver which is activated there + (except "Simple tuner support" for ATSC 3rd generation only -> see case 9 please). Then please activate: 2a) Main module part: +"Multimedia support" => "DVB/ATSC adapters" + => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" -a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" -b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card -OR -c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter -d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers" -Notice: d.) is helpful for troubleshooting +a.) => "Technisat/B2C2 Air/Sky/Cable2PC PCI" (PCI card) or +b.) => "Technisat/B2C2 Air/Sky/Cable2PC USB" (USB 1.1 adapter) + and for troubleshooting purposes: +c.) => "Enable debug for the B2C2 FlexCop drivers" -2b) Frontend module part: +2b) Frontend / Tuner / Demodulator module part: +"Multimedia support" => "DVB/ATSC adapters" + => "Customise the frontend modules to build" "Customise DVB frontends" => 1.) SkyStar DVB-S Revision 2.3: -a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" -b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based" +a.) => "Zarlink VP310/MT312/ZL10313 based" +b.) => "Generic I2C PLL based tuners" 2.) SkyStar DVB-S Revision 2.6: -a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" -b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based" +a.) => "ST STV0299 based" +b.) => "Generic I2C PLL based tuners" 3.) SkyStar DVB-S Revision 2.7: -a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" -b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based" -c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" -d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" +a.) => "Samsung S5H1420 based" +b.) => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" +c.) => "ISL6421 SEC controller" 4.) SkyStar DVB-S Revision 2.8: -a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" -b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" -c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based" -d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" +a.) => "Conexant CX24123 based" +b.) => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" +c.) => "ISL6421 SEC controller" 5.) AirStar DVB-T card: -a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" -b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based" +a.) => "Zarlink MT352 based" +b.) => "Generic I2C PLL based tuners" 6.) CableStar DVB-C card: -a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" -b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based" +a.) => "ST STV0297 based" +b.) => "Generic I2C PLL based tuners" 7.) AirStar ATSC card 1st generation: -a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" -b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510" +a.) => "Broadcom BCM3510" 8.) AirStar ATSC card 2nd generation: -a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" -b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based" -c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners" +a.) => "NxtWave Communications NXT2002/NXT2004 based" +b.) => "Generic I2C PLL based tuners" 9.) AirStar ATSC card 3rd generation: -a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" -b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based" -c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support" +a.) => "LG Electronics LGDT3302/LGDT3303 based" +b.) "Multimedia support" => "Customise analog and hybrid tuner modules to build" + => "Simple tuner support" -Author: Uwe Bugla February 2009 +Author: Uwe Bugla August 2009 -- cgit v1.2.3-70-g09d2 From 453d63c6a1afff9aa7e83ac9c3a9dbd6254a1fcd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 16 Sep 2009 23:22:05 -0300 Subject: V4L/DVB (12915): DocBook/media: Add isdb-t documentation Adds ISDB-T_and_ISDB-Tsb_with_S2API spec converted into DocBook format. The text is authored by Patrick Boettcher, and was converted to DocBook by me. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/dvb/.gitignore | 1 + Documentation/DocBook/dvb/dvbapi.xml | 8 + Documentation/DocBook/dvb/frontend.xml | 1 + Documentation/DocBook/dvb/isdbt.xml | 313 +++++++++++++++++++++++++++++++++ Documentation/DocBook/v4l/.gitignore | 1 + 5 files changed, 324 insertions(+) create mode 100644 Documentation/DocBook/dvb/.gitignore create mode 100644 Documentation/DocBook/dvb/isdbt.xml create mode 100644 Documentation/DocBook/v4l/.gitignore (limited to 'Documentation') diff --git a/Documentation/DocBook/dvb/.gitignore b/Documentation/DocBook/dvb/.gitignore new file mode 100644 index 00000000000..d7ec32eafac --- /dev/null +++ b/Documentation/DocBook/dvb/.gitignore @@ -0,0 +1 @@ +!*.xml diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/dvb/dvbapi.xml index d53ca4e98e8..4fc5b23470a 100644 --- a/Documentation/DocBook/dvb/dvbapi.xml +++ b/Documentation/DocBook/dvb/dvbapi.xml @@ -30,6 +30,14 @@ +2.0.1 +2009-09-16 +mcc + +Added ISDB-T test originally written by Patrick Boettcher + + + 2.0.0 2009-09-06 mcc diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml index 028c9f23f0d..9d89a7b94fd 100644 --- a/Documentation/DocBook/dvb/frontend.xml +++ b/Documentation/DocBook/dvb/frontend.xml @@ -1763,3 +1763,4 @@ modulation mode which can be one of the following:
+&sub-isdbt; diff --git a/Documentation/DocBook/dvb/isdbt.xml b/Documentation/DocBook/dvb/isdbt.xml new file mode 100644 index 00000000000..39e4696f1f0 --- /dev/null +++ b/Documentation/DocBook/dvb/isdbt.xml @@ -0,0 +1,313 @@ +
+ ISDB-T frontend + This section describes shortly what are the possible parameters in the Linux + DVB-API called "S2API" and now DVB API 5 in order to tune an ISDB-T/ISDB-Tsb + demodulator: + + This ISDB-T/ISDB-Tsb API extension should reflect all information + needed to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible + that some very sophisticated devices won't need certain parameters to + tune. + + The information given here should help application writers to know how + to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API. + + The details given here about ISDB-T and ISDB-Tsb are just enough to + basically show the dependencies between the needed parameter values, + but surely some information is left out. For more detailed information + see the following documents: + + ARIB STD-B31 - "Transmission System for Digital Terrestrial + Television Broadcasting" and + ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial + Television Broadcasting". + + In order to read this document one has to have some knowledge the + channel structure in ISDB-T and ISDB-Tsb. I.e. it has to be known to + the reader that an ISDB-T channel consists of 13 segments, that it can + have up to 3 layer sharing those segments, and things like that. + + Parameters used by ISDB-T and ISDB-Tsb. + +
+ Parameters that are common with DVB-T and ATSC + +
+ <constant>DTV_FREQUENCY</constant> + + Central frequency of the channel. + + For ISDB-T the channels are usally transmitted with an offset of 143kHz. E.g. a + valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of + the channel which is 6MHz. + + As in ISDB-Tsb the channel consists of only one or three segments the + frequency step is 429kHz, 3*429 respectively. As for ISDB-T the + central frequency of the channel is expected. +
+ +
+ <constant>DTV_BANDWIDTH_HZ</constant> (optional) + + Possible values: + + For ISDB-T it should be always 6000000Hz (6MHz) + For ISDB-Tsb it can vary depending on the number of connected segments + + Note: Hardware specific values might be given here, but standard + applications should not bother to set a value to this field as + standard demods are ignoring it anyway. + + Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from + other parameters (DTV_ISDBT_SB_SEGMENT_IDX, + DTV_ISDBT_SB_SEGMENT_COUNT). +
+ +
+ <constant>DTV_DELIVERY_SYSTEM</constant> + + Possible values: SYS_ISDBT +
+ +
+ <constant>DTV_TRANSMISSION_MODE</constant> + + ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called + 'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K + + Possible values: TRANSMISSION_MODE_2K, TRANSMISSION_MODE_8K, + TRANSMISSION_MODE_AUTO, TRANSMISSION_MODE_4K + + If DTV_TRANSMISSION_MODE is set the TRANSMISSION_MODE_AUTO the + hardware will try to find the correct FFT-size (if capable) and will + use TMCC to fill in the missing parameters. + + TRANSMISSION_MODE_4K is added at the same time as the other new parameters. +
+ +
+ <constant>DTV_GUARD_INTERVAL</constant> + + Possible values: GUARD_INTERVAL_1_32, GUARD_INTERVAL_1_16, GUARD_INTERVAL_1_8, + GUARD_INTERVAL_1_4, GUARD_INTERVAL_AUTO + + If DTV_GUARD_INTERVAL is set the GUARD_INTERVAL_AUTO the hardware will + try to find the correct guard interval (if capable) and will use TMCC to fill + in the missing parameters. +
+
+
ISDB-T only parameters + +
+ <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> + + If DTV_ISDBT_SOUND_BROADCASTING is '0' this bit-field represents whether + the channel is in partial reception mode or not. + + If '1' DTV_ISDBT_LAYERA_* values are assigned to the center segment and + DTV_ISDBT_LAYERA_SEGMENT_COUNT has to be '1'. + + If in addition DTV_ISDBT_SOUND_BROADCASTING is '1' + DTV_ISDBT_PARTIAL_RECEPTION represents whether this ISDB-Tsb channel + is consisting of one segment and layer or three segments and two layers. + + Possible values: 0, 1, -1 (AUTO) +
+ +
+ <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> + + This field represents whether the other DTV_ISDBT_*-parameters are + referring to an ISDB-T and an ISDB-Tsb channel. (See also + DTV_ISDBT_PARTIAL_RECEPTION). + + Possible values: 0, 1, -1 (AUTO) +
+ +
+ <constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant> + + This field only applies if DTV_ISDBT_SOUND_BROADCASTING is '1'. + + (Note of the author: This might not be the correct description of the + SUBCHANNEL-ID in all details, but it is my understanding of the technical + background needed to program a device) + + An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a + set of connected ISDB-Tsb channels. In this set of channels every + channel can be received independently. The number of connected + ISDB-Tsb segment can vary, e.g. depending on the frequency spectrum + bandwidth available. + + Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The + broadcaster has several possibilities to put those channels in the + air: Assuming a normal 13-segment ISDB-T spectrum he can align the 8 + segments from position 1-8 to 5-13 or anything in between. + + The underlying layer of segments are subchannels: each segment is + consisting of several subchannels with a predefined IDs. A sub-channel + is used to help the demodulator to synchronize on the channel. + + An ISDB-T channel is always centered over all sub-channels. As for + the example above, in ISDB-Tsb it is no longer as simple as that. + + The DTV_ISDBT_SB_SUBCHANNEL_ID parameter is used to give the + sub-channel ID of the segment to be demodulated. + + Possible values: 0 .. 41, -1 (AUTO) +
+ +
+ + <constant>DTV_ISDBT_SB_SEGMENT_IDX</constant> + + This field only applies if DTV_ISDBT_SOUND_BROADCASTING is '1'. + + DTV_ISDBT_SB_SEGMENT_IDX gives the index of the segment to be + demodulated for an ISDB-Tsb channel where several of them are + transmitted in the connected manner. + + Possible values: 0 .. DTV_ISDBT_SB_SEGMENT_COUNT - 1 + + Note: This value cannot be determined by an automatic channel search. +
+ +
+ <constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> + + This field only applies if DTV_ISDBT_SOUND_BROADCASTING is '1'. + + DTV_ISDBT_SB_SEGMENT_COUNT gives the total count of connected ISDB-Tsb + channels. + + Possible values: 1 .. 13 + + Note: This value cannot be determined by an automatic channel search. +
+ +
+ Hierarchical layers + + ISDB-T channels can be coded hierarchically. As opposed to DVB-T in + ISDB-T hierarchical layers can be decoded simultaneously. For that + reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders. + + ISDB-T has 3 hierarchical layers which each can use a part of the + available segments. The total number of segments over all layers has + to 13 in ISDB-T. + +
+ <constant>DTV_ISDBT_LAYER_ENABLED</constant> + + Hierarchical reception in ISDB-T is achieved by enabling or disabling + layers in the decoding process. Setting all bits of + DTV_ISDBT_LAYER_ENABLED to '1' forces all layers (if applicable) to be + demodulated. This is the default. + + If the channel is in the partial reception mode + (DTV_ISDBT_PARTIAL_RECEPTION = 1) the central segment can be decoded + independently of the other 12 segments. In that mode layer A has to + have a SEGMENT_COUNT of 1. + + In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb + according to DTV_ISDBT_PARTIAL_RECEPTION. SEGMENT_COUNT must be filled + accordingly. + + Possible values: 0x1, 0x2, 0x4 (|-able) + + DTV_ISDBT_LAYER_ENABLED[0:0] - layer A + DTV_ISDBT_LAYER_ENABLED[1:1] - layer B + DTV_ISDBT_LAYER_ENABLED[2:2] - layer C + DTV_ISDBT_LAYER_ENABLED[31:3] unused +
+ +
+ <constant>DTV_ISDBT_LAYER*_FEC</constant> + + Possible values: FEC_AUTO, FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_7_8 +
+ +
+ <constant>DTV_ISDBT_LAYER*_MODULATION</constant> + + Possible values: QAM_AUTO, QPSK, QAM_16, QAM_64, DQPSK + + Note: If layer C is DQPSK layer B has to be DQPSK. If layer B is DQPSK + and DTV_ISDBT_PARTIAL_RECEPTION=0 layer has to be DQPSK. +
+ +
+ <constant>DTV_ISDBT_LAYER*_SEGMENT_COUNT</constant> + + Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO) + + Note: Truth table for DTV_ISDBT_SOUND_BROADCASTING and + DTV_ISDBT_PARTIAL_RECEPTION and LAYER*_SEGMENT_COUNT + + + + + + + PR + SB + Layer A width + Layer B width + Layer C width + total width + + + + 0 + 0 + 1 .. 13 + 1 .. 13 + 1 .. 13 + 13 + + + + 1 + 0 + 1 + 1 .. 13 + 1 .. 13 + 13 + + + + 0 + 1 + 1 + 0 + 0 + 1 + + + + 1 + 1 + 1 + 2 + 0 + 13 + + + + + + +
+ +
+ <constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant> + + Possible values: 0, 1, 2, 3, -1 (AUTO) + + Note: The real inter-leaver depth-names depend on the mode (fft-size); the values + here are referring to what can be found in the TMCC-structure - + independent of the mode. +
+
+
+
diff --git a/Documentation/DocBook/v4l/.gitignore b/Documentation/DocBook/v4l/.gitignore new file mode 100644 index 00000000000..d7ec32eafac --- /dev/null +++ b/Documentation/DocBook/v4l/.gitignore @@ -0,0 +1 @@ +!*.xml -- cgit v1.2.3-70-g09d2 From 4e5fee2bc15bf1226783db5855c25ec8ebfb25ac Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 16 Sep 2009 23:56:44 -0300 Subject: V4L/DVB (12917): DocBook/media: add V4L2_PIX_FMT_TM6000 This is a proprietary format found with Trident tm6000 series of chipsets. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/v4l/pixfmt.xml | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml index ebfbed03dbb..7d396a3785f 100644 --- a/Documentation/DocBook/v4l/pixfmt.xml +++ b/Documentation/DocBook/v4l/pixfmt.xml @@ -777,6 +777,11 @@ kernel sources in the file Documentation/video4linux/cx2341x/README.hm url="http://www.thedirks.org/winnov/"> http://www.thedirks.org/winnov/ + + V4L2_PIX_FMT_TM6000 + 'TM60' + Used by Trident tm6000 + V4L2_PIX_FMT_YYUV 'YYUV' -- cgit v1.2.3-70-g09d2 From c18038d2bfe61863a8d8c78cd5a08dcea71db9dd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 17 Sep 2009 01:25:41 -0300 Subject: V4L/DVB (12919): DocBook/media: fix some DocBook non-compliances Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/dvb/isdbt.xml | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/dvb/isdbt.xml b/Documentation/DocBook/dvb/isdbt.xml index 39e4696f1f0..92855222fcc 100644 --- a/Documentation/DocBook/dvb/isdbt.xml +++ b/Documentation/DocBook/dvb/isdbt.xml @@ -96,7 +96,8 @@ in the missing parameters. -
ISDB-T only parameters +
+ ISDB-T only parameters
<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> @@ -121,7 +122,7 @@ referring to an ISDB-T and an ISDB-Tsb channel. (See also DTV_ISDBT_PARTIAL_RECEPTION). - Possible values: 0, 1, -1 (AUTO) + Possible values: 0, 1, -1 (AUTO)
-- cgit v1.2.3-70-g09d2 From db17ab98460496df59453ff2790aac23ebcc2e90 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 17 Sep 2009 01:44:22 -0300 Subject: V4L/DVB (12920): DocBook/media: Some xmlto or DTD's don't accept reference inside appendix That was weird: on some distros, we need to remove tag for it to work. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/v4l/v4l2.xml | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml index 97801725b97..937b4157a5d 100644 --- a/Documentation/DocBook/v4l/v4l2.xml +++ b/Documentation/DocBook/v4l/v4l2.xml @@ -397,9 +397,8 @@ and discussions on the V4L mailing list. &sub-compat; - + Function Reference - @@ -454,7 +453,6 @@ and discussions on the V4L mailing list. &sub-read; &sub-select; &sub-write; - -- cgit v1.2.3-70-g09d2 From 443c1228d50518f3c550e1fef490a2c9d9246ce7 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 9 May 2009 21:17:28 -0300 Subject: V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon This patch adds support for all of the known shipping Hauppauge HVR-2200 and HVR-2250 boards. Digital TV ATSC/QAM and DVB-T is enabled at this time. Both tuners are supported. Volatiles and typedefs need rework, the rest is coding style compliant. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7164 | 8 + drivers/media/video/Kconfig | 2 + drivers/media/video/Makefile | 1 + drivers/media/video/saa7164/Kconfig | 19 + drivers/media/video/saa7164/Makefile | 12 + drivers/media/video/saa7164/saa7164-api.c | 619 ++++++++++++++++++++++ drivers/media/video/saa7164/saa7164-buffer.c | 158 ++++++ drivers/media/video/saa7164/saa7164-bus.c | 448 ++++++++++++++++ drivers/media/video/saa7164/saa7164-cards.c | 562 ++++++++++++++++++++ drivers/media/video/saa7164/saa7164-cmd.c | 529 +++++++++++++++++++ drivers/media/video/saa7164/saa7164-core.c | 746 +++++++++++++++++++++++++++ drivers/media/video/saa7164/saa7164-dvb.c | 578 +++++++++++++++++++++ drivers/media/video/saa7164/saa7164-fw.c | 615 ++++++++++++++++++++++ drivers/media/video/saa7164/saa7164-i2c.c | 170 ++++++ drivers/media/video/saa7164/saa7164-reg.h | 166 ++++++ drivers/media/video/saa7164/saa7164-types.h | 287 +++++++++++ drivers/media/video/saa7164/saa7164.h | 401 ++++++++++++++ 17 files changed, 5321 insertions(+) create mode 100644 Documentation/video4linux/CARDLIST.saa7164 create mode 100644 drivers/media/video/saa7164/Kconfig create mode 100644 drivers/media/video/saa7164/Makefile create mode 100644 drivers/media/video/saa7164/saa7164-api.c create mode 100644 drivers/media/video/saa7164/saa7164-buffer.c create mode 100644 drivers/media/video/saa7164/saa7164-bus.c create mode 100644 drivers/media/video/saa7164/saa7164-cards.c create mode 100644 drivers/media/video/saa7164/saa7164-cmd.c create mode 100644 drivers/media/video/saa7164/saa7164-core.c create mode 100644 drivers/media/video/saa7164/saa7164-dvb.c create mode 100644 drivers/media/video/saa7164/saa7164-fw.c create mode 100644 drivers/media/video/saa7164/saa7164-i2c.c create mode 100644 drivers/media/video/saa7164/saa7164-reg.h create mode 100644 drivers/media/video/saa7164/saa7164-types.h create mode 100644 drivers/media/video/saa7164/saa7164.h (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7164 b/Documentation/video4linux/CARDLIST.saa7164 new file mode 100644 index 00000000000..d1e8217e436 --- /dev/null +++ b/Documentation/video4linux/CARDLIST.saa7164 @@ -0,0 +1,8 @@ + 0 -> Unknown + 1 -> Generic Rev2 + 2 -> Generic Rev3 + 3 -> Hauppauge WinTV-HVR2250 [0070:8880,0070:8810] + 4 -> Hauppauge WinTV-HVR2200 [0070:8980] + 5 -> Hauppauge WinTV-HVR2200 [0070:8900] + 6 -> Hauppauge WinTV-HVR2200 [0070:8901] + 7 -> Hauppauge WinTV-HVR2250 [0070:88A1,0070:8891] diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 1d758525d23..e01b759faf5 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -690,6 +690,8 @@ source "drivers/media/video/ivtv/Kconfig" source "drivers/media/video/cx18/Kconfig" +source "drivers/media/video/saa7164/Kconfig" + config VIDEO_M32R_AR tristate "AR devices" depends on M32R && VIDEO_V4L1 diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 9f2e3214a48..1dddea1ada5 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -157,6 +157,7 @@ obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o obj-$(CONFIG_VIDEO_AU0828) += au0828/ obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ +obj-$(CONFIG_VIDEO_SAA7164) += saa7164/ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o diff --git a/drivers/media/video/saa7164/Kconfig b/drivers/media/video/saa7164/Kconfig new file mode 100644 index 00000000000..582556792bd --- /dev/null +++ b/drivers/media/video/saa7164/Kconfig @@ -0,0 +1,19 @@ +config VIDEO_SAA7164 + tristate "NXP SAA7164 support" + depends on DVB_CORE && PCI && I2C + depends on HOTPLUG # due to FW_LOADER + select I2C_ALGOBIT + select FW_LOADER + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEOBUF_DVB + select DVB_TDA10048 if !DVB_FE_CUSTOMISE + select DVB_S5H1411 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE + ---help--- + This is a video4linux driver for NXP SAA7164 based + TV cards. + + To compile this driver as a module, choose M here: the + module will be called saa7164 + diff --git a/drivers/media/video/saa7164/Makefile b/drivers/media/video/saa7164/Makefile new file mode 100644 index 00000000000..4b329fd42ad --- /dev/null +++ b/drivers/media/video/saa7164/Makefile @@ -0,0 +1,12 @@ +saa7164-objs := saa7164-cards.o saa7164-core.o saa7164-i2c.o saa7164-dvb.o \ + saa7164-fw.o saa7164-bus.o saa7164-cmd.o saa7164-api.o \ + saa7164-buffer.o + +obj-$(CONFIG_VIDEO_SAA7164) += saa7164.o + +EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core +EXTRA_CFLAGS += -Idrivers/media/dvb/frontends + +EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/video/saa7164/saa7164-api.c b/drivers/media/video/saa7164/saa7164-api.c new file mode 100644 index 00000000000..8cef1df9b54 --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-api.c @@ -0,0 +1,619 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include "saa7164.h" + +int saa7164_api_transition_port(struct saa7164_tsport *port, u8 mode) +{ + int ret; + + ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, SET_CUR, + SAA_STATE_CONTROL, sizeof(mode), &mode); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version) +{ + int ret; + + ret = saa7164_cmd_send(dev, 0, GET_CUR, + GET_FW_VERSION_CONTROL, sizeof(u32), version); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen) +{ + u8 reg[] = { 0x0f, 0x00 }; + + if (buflen < 128) + return -ENOMEM; + + /* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */ + /* TODO: Pull the details from the boards struct */ + return saa7164_api_i2c_read(&dev->i2c_bus[0], 0xa0 >> 1, sizeof(reg), + ®[0], 128, buf); +} + +/* Exercise the i2c interface, saa7164_cmd()/bus() layers: + * 1. Read the identity byte from each of the demodulators. + * 2. Read the entire register set from the TDA18271. + * TODO: This function has no purpose other than to exercise i2c. + */ +int saa7164_api_test(struct saa7164_dev *dev) +{ + /* TDA10048 identities */ + u8 reg[] = { 0x00 }; + u8 data[256]; + dprintk(DBGLVL_API, "%s()\n", __func__); + /* Read all 39 bytes from the TDA18271 tuners */ + saa7164_api_i2c_read(&dev->i2c_bus[1], 0xc0 >> 1, 0, + ®[0], 39, &data[0]); + saa7164_api_i2c_read(&dev->i2c_bus[2], 0xc0 >> 1, 0, + ®[0], 39, &data[0]); + + return 0; +} + +int saa7164_api_configure_port_mpeg2ts(struct saa7164_dev *dev, + struct saa7164_tsport *port, + tmComResTSFormatDescrHeader_t *tsfmt) +{ + dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", tsfmt->bFormatIndex); + dprintk(DBGLVL_API, " bDataOffset = 0x%x\n", tsfmt->bDataOffset); + dprintk(DBGLVL_API, " bPacketLength= 0x%x\n", tsfmt->bPacketLength); + dprintk(DBGLVL_API, " bStrideLength= 0x%x\n", tsfmt->bStrideLength); + dprintk(DBGLVL_API, " bguid = (....)\n"); + + /* Cache the hardware configuration in the port */ + + port->bufcounter = port->hwcfg.BARLocation; + port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32)); + port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32)); + port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32)); + port->bufptr32l = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32); + port->bufptr32h = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + port->bufptr64 = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n", + port->hwcfg.BARLocation); + + dprintk(DBGLVL_API, " = VS_FORMAT_MPEGTS (becomes dev->ts[%d])\n", + port->nr); + + return 0; +} + +int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len) +{ + struct saa7164_tsport *port = 0; + u32 idx, next_offset; + int i; + tmComResDescrHeader_t *hdr, *t; + tmComResExtDevDescrHeader_t *exthdr; + tmComResPathDescrHeader_t *pathhdr; + tmComResAntTermDescrHeader_t *anttermhdr; + tmComResTunerDescrHeader_t *tunerunithdr; + tmComResDMATermDescrHeader_t *vcoutputtermhdr; + tmComResTSFormatDescrHeader_t *tsfmt; + u32 currpath = 0; + + dprintk(DBGLVL_API, + "%s(?,?,%d) sizeof(tmComResDescrHeader_t) = %lu bytes\n", + __func__, len, sizeof(tmComResDescrHeader_t)); + + for (idx = 0; idx < (len - sizeof(tmComResDescrHeader_t)); ) { + + hdr = (tmComResDescrHeader_t *)(buf + idx); + + if (hdr->type != CS_INTERFACE) + return SAA_ERR_NOT_SUPPORTED; + + dprintk(DBGLVL_API, "@ 0x%x = \n", idx); + switch (hdr->subtype) { + case GENERAL_REQUEST: + dprintk(DBGLVL_API, " GENERAL_REQUEST\n"); + break; + case VC_TUNER_PATH: + dprintk(DBGLVL_API, " VC_TUNER_PATH\n"); + pathhdr = (tmComResPathDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " pathid = 0x%x\n", + pathhdr->pathid); + currpath = pathhdr->pathid; + break; + case VC_INPUT_TERMINAL: + dprintk(DBGLVL_API, " VC_INPUT_TERMINAL\n"); + anttermhdr = + (tmComResAntTermDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " terminalid = 0x%x\n", + anttermhdr->terminalid); + dprintk(DBGLVL_API, " terminaltype = 0x%x\n", + anttermhdr->terminaltype); + switch (anttermhdr->terminaltype) { + case ITT_ANTENNA: + dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); + break; + case LINE_CONNECTOR: + dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); + break; + case SPDIF_CONNECTOR: + dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); + break; + case COMPOSITE_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPOSITE_CONNECTOR\n"); + break; + case SVIDEO_CONNECTOR: + dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); + break; + case COMPONENT_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPONENT_CONNECTOR\n"); + break; + case STANDARD_DMA: + dprintk(DBGLVL_API, " = STANDARD_DMA\n"); + break; + default: + dprintk(DBGLVL_API, " = undefined (0x%x)\n", + anttermhdr->terminaltype); + } + dprintk(DBGLVL_API, " assocterminal= 0x%x\n", + anttermhdr->assocterminal); + dprintk(DBGLVL_API, " iterminal = 0x%x\n", + anttermhdr->iterminal); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + anttermhdr->controlsize); + break; + case VC_OUTPUT_TERMINAL: + dprintk(DBGLVL_API, " VC_OUTPUT_TERMINAL\n"); + vcoutputtermhdr = + (tmComResDMATermDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + vcoutputtermhdr->unitid); + dprintk(DBGLVL_API, " terminaltype = 0x%x\n", + vcoutputtermhdr->terminaltype); + switch (vcoutputtermhdr->terminaltype) { + case ITT_ANTENNA: + dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); + break; + case LINE_CONNECTOR: + dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); + break; + case SPDIF_CONNECTOR: + dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); + break; + case COMPOSITE_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPOSITE_CONNECTOR\n"); + break; + case SVIDEO_CONNECTOR: + dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); + break; + case COMPONENT_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPONENT_CONNECTOR\n"); + break; + case STANDARD_DMA: + dprintk(DBGLVL_API, " = STANDARD_DMA\n"); + break; + default: + dprintk(DBGLVL_API, " = undefined (0x%x)\n", + vcoutputtermhdr->terminaltype); + } + dprintk(DBGLVL_API, " assocterminal= 0x%x\n", + vcoutputtermhdr->assocterminal); + dprintk(DBGLVL_API, " sourceid = 0x%x\n", + vcoutputtermhdr->sourceid); + dprintk(DBGLVL_API, " iterminal = 0x%x\n", + vcoutputtermhdr->iterminal); + dprintk(DBGLVL_API, " BARLocation = 0x%x\n", + vcoutputtermhdr->BARLocation); + dprintk(DBGLVL_API, " flags = 0x%x\n", + vcoutputtermhdr->flags); + dprintk(DBGLVL_API, " interruptid = 0x%x\n", + vcoutputtermhdr->interruptid); + dprintk(DBGLVL_API, " buffercount = 0x%x\n", + vcoutputtermhdr->buffercount); + dprintk(DBGLVL_API, " metadatasize = 0x%x\n", + vcoutputtermhdr->metadatasize); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + vcoutputtermhdr->controlsize); + dprintk(DBGLVL_API, " numformats = 0x%x\n", + vcoutputtermhdr->numformats); + + t = (tmComResDescrHeader_t *) + ((tmComResDMATermDescrHeader_t *)(buf + idx)); + next_offset = idx + (vcoutputtermhdr->len); + for (i = 0; i < vcoutputtermhdr->numformats; i++) { + t = (tmComResDescrHeader_t *) + (buf + next_offset); + switch (t->subtype) { + case VS_FORMAT_MPEG2TS: + tsfmt = + (tmComResTSFormatDescrHeader_t *)t; + if (currpath == 1) + port = &dev->ts1; + else + port = &dev->ts2; + memcpy(&port->hwcfg, vcoutputtermhdr, + sizeof(*vcoutputtermhdr)); + saa7164_api_configure_port_mpeg2ts(dev, + port, tsfmt); + break; + case VS_FORMAT_MPEG2PS: + dprintk(DBGLVL_API, + " = VS_FORMAT_MPEG2PS\n"); + break; + case VS_FORMAT_VBI: + dprintk(DBGLVL_API, + " = VS_FORMAT_VBI\n"); + break; + case VS_FORMAT_RDS: + dprintk(DBGLVL_API, + " = VS_FORMAT_RDS\n"); + break; + case VS_FORMAT_UNCOMPRESSED: + dprintk(DBGLVL_API, + " = VS_FORMAT_UNCOMPRESSED\n"); + break; + case VS_FORMAT_TYPE: + dprintk(DBGLVL_API, + " = VS_FORMAT_TYPE\n"); + break; + default: + dprintk(DBGLVL_API, + " = undefined (0x%x)\n", + t->subtype); + } + next_offset += t->len; + } + + break; + case TUNER_UNIT: + dprintk(DBGLVL_API, " TUNER_UNIT\n"); + tunerunithdr = + (tmComResTunerDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + tunerunithdr->unitid); + dprintk(DBGLVL_API, " sourceid = 0x%x\n", + tunerunithdr->sourceid); + dprintk(DBGLVL_API, " iunit = 0x%x\n", + tunerunithdr->iunit); + dprintk(DBGLVL_API, " tuningstandards = 0x%x\n", + tunerunithdr->tuningstandards); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + tunerunithdr->controlsize); + dprintk(DBGLVL_API, " controls = 0x%x\n", + tunerunithdr->controls); + break; + case VC_SELECTOR_UNIT: + dprintk(DBGLVL_API, " VC_SELECTOR_UNIT\n"); + break; + case VC_PROCESSING_UNIT: + dprintk(DBGLVL_API, " VC_PROCESSING_UNIT\n"); + break; + case FEATURE_UNIT: + dprintk(DBGLVL_API, " FEATURE_UNIT\n"); + break; + case ENCODER_UNIT: + dprintk(DBGLVL_API, " ENCODER_UNIT\n"); + break; + case EXTENSION_UNIT: + dprintk(DBGLVL_API, " EXTENSION_UNIT\n"); + exthdr = (tmComResExtDevDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + exthdr->unitid); + dprintk(DBGLVL_API, " deviceid = 0x%x\n", + exthdr->deviceid); + dprintk(DBGLVL_API, " devicetype = 0x%x\n", + exthdr->devicetype); + if (exthdr->devicetype & 0x1) + dprintk(DBGLVL_API, " = Decoder Device\n"); + if (exthdr->devicetype & 0x2) + dprintk(DBGLVL_API, " = GPIO Source\n"); + if (exthdr->devicetype & 0x4) + dprintk(DBGLVL_API, " = Video Decoder\n"); + if (exthdr->devicetype & 0x8) + dprintk(DBGLVL_API, " = Audio Decoder\n"); + if (exthdr->devicetype & 0x20) + dprintk(DBGLVL_API, " = Crossbar\n"); + if (exthdr->devicetype & 0x40) + dprintk(DBGLVL_API, " = Tuner\n"); + if (exthdr->devicetype & 0x80) + dprintk(DBGLVL_API, " = IF PLL\n"); + if (exthdr->devicetype & 0x100) + dprintk(DBGLVL_API, " = Demodulator\n"); + if (exthdr->devicetype & 0x200) + dprintk(DBGLVL_API, " = RDS Decoder\n"); + if (exthdr->devicetype & 0x400) + dprintk(DBGLVL_API, " = Encoder\n"); + if (exthdr->devicetype & 0x800) + dprintk(DBGLVL_API, " = IR Decoder\n"); + if (exthdr->devicetype & 0x1000) + dprintk(DBGLVL_API, " = EEPROM\n"); + if (exthdr->devicetype & 0x2000) + dprintk(DBGLVL_API, + " = VBI Decoder\n"); + if (exthdr->devicetype & 0x10000) + dprintk(DBGLVL_API, + " = Streaming Device\n"); + if (exthdr->devicetype & 0x20000) + dprintk(DBGLVL_API, + " = DRM Device\n"); + if (exthdr->devicetype & 0x40000000) + dprintk(DBGLVL_API, + " = Generic Device\n"); + if (exthdr->devicetype & 0x80000000) + dprintk(DBGLVL_API, + " = Config Space Device\n"); + dprintk(DBGLVL_API, " numgpiopins = 0x%x\n", + exthdr->numgpiopins); + dprintk(DBGLVL_API, " numgpiogroups = 0x%x\n", + exthdr->numgpiogroups); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + exthdr->controlsize); + break; + case PVC_INFRARED_UNIT: + dprintk(DBGLVL_API, " PVC_INFRARED_UNIT\n"); + break; + case DRM_UNIT: + dprintk(DBGLVL_API, " DRM_UNIT\n"); + break; + default: + dprintk(DBGLVL_API, "default %d\n", hdr->subtype); + } + + dprintk(DBGLVL_API, " 1.%x\n", hdr->len); + dprintk(DBGLVL_API, " 2.%x\n", hdr->type); + dprintk(DBGLVL_API, " 3.%x\n", hdr->subtype); + dprintk(DBGLVL_API, " 4.%x\n", hdr->unitid); + + idx += hdr->len; + } + + return 0; +} + +int saa7164_api_enum_subdevs(struct saa7164_dev *dev) +{ + int ret; + u32 buflen = 0; + u8 *buf; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + /* Get the total descriptor length */ + ret = saa7164_cmd_send(dev, 0, GET_LEN, + GET_DESCRIPTORS_CONTROL, sizeof(buflen), &buflen); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + dprintk(DBGLVL_API, "%s() total descriptor size = %d bytes.\n", + __func__, buflen); + + /* Allocate enough storage for all of the descs */ + buf = kzalloc(buflen, GFP_KERNEL); + if (buf == NULL) + return SAA_ERR_NO_RESOURCES; + + /* Retrieve them */ + ret = saa7164_cmd_send(dev, 0, GET_CUR, + GET_DESCRIPTORS_CONTROL, buflen, buf); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + goto out; + } + + if (debug & DBGLVL_API) + saa7164_dumphex16(dev, buf, (buflen/16)*16); + + saa7164_api_dump_subdevs(dev, buf, buflen); + +out: + kfree(buf); + return ret; +} + +int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, + u32 datalen, u8 *data) +{ + struct saa7164_dev *dev = bus->dev; + u16 len = 0; + int unitid; + u32 regval; + u8 buf[256]; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + if (reglen > 4) + return -EIO; + + if (reglen == 1) + regval = *(reg); + else + if (reglen == 2) + regval = ((*(reg) << 8) || *(reg+1)); + else + if (reglen == 3) + regval = ((*(reg) << 16) | (*(reg+1) << 8) | *(reg+2)); + else + if (reglen == 4) + regval = ((*(reg) << 24) | (*(reg+1) << 16) | + (*(reg+2) << 8) | *(reg+3)); + + /* Prepare the send buffer */ + /* Bytes 00-03 source register length + * 04-07 source bytes to read + * 08... register address + */ + memset(buf, 0, sizeof(buf)); + memcpy((buf + 2 * sizeof(u32) + 0), reg, reglen); + *((u32 *)(buf + 0 * sizeof(u32))) = reglen; + *((u32 *)(buf + 1 * sizeof(u32))) = datalen; + + unitid = saa7164_i2caddr_to_unitid(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr 0x%x to unitid\n", + __func__, addr); + return -EIO; + } + + ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); + return -EIO; + } + + dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); + + if (debug & DBGLVL_I2C) + saa7164_dumphex16(dev, buf, 2 * 16); + + ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); + else { + if (debug & DBGLVL_I2C) + saa7164_dumphex16(dev, buf, sizeof(buf)); + memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen); + } + + return ret == SAA_OK ? 0 : -EIO; +} + +/* For a given 8 bit i2c address device, write the buffer */ +int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen, + u8 *data) +{ + struct saa7164_dev *dev = bus->dev; + u16 len = 0; + int unitid; + int reglen; + u8 buf[256]; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + if ((datalen == 0) || (datalen > 232)) + return -EIO; + + memset(buf, 0, sizeof(buf)); + + unitid = saa7164_i2caddr_to_unitid(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr 0x%x to unitid\n", + __func__, addr); + return -EIO; + } + + reglen = saa7164_i2caddr_to_reglen(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr to reglen\n", + __func__); + return -EIO; + } + + ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); + return -EIO; + } + + dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); + + /* Prepare the send buffer */ + /* Bytes 00-03 dest register length + * 04-07 dest bytes to write + * 08... register address + */ + *((u32 *)(buf + 0 * sizeof(u32))) = reglen; + *((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen; + memcpy((buf + 2 * sizeof(u32)), data, datalen); + + if (debug & DBGLVL_I2C) + saa7164_dumphex16(dev, buf, sizeof(buf)); + + ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); + + return ret == SAA_OK ? 0 : -EIO; +} + + +int saa7164_api_modify_gpio(struct saa7164_dev *dev, u8 unitid, + u8 pin, u8 state) +{ + int ret; + tmComResGPIO_t t; + + dprintk(DBGLVL_API, "%s(0x%x, %d, %d)\n", + __func__, unitid, pin, state); + + if ((pin > 7) || (state > 2)) + return SAA_ERR_BAD_PARAMETER; + + t.pin = pin; + t.state = state; + + ret = saa7164_cmd_send(dev, unitid, SET_CUR, + EXU_GPIO_CONTROL, sizeof(t), &t); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", + __func__, ret); + + return ret; +} + +int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, + u8 pin) +{ + return saa7164_api_modify_gpio(dev, unitid, pin, 1); +} + +int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, + u8 pin) +{ + return saa7164_api_modify_gpio(dev, unitid, pin, 0); +} + + + diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/video/saa7164/saa7164-buffer.c new file mode 100644 index 00000000000..4176544ee01 --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-buffer.c @@ -0,0 +1,158 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "saa7164.h" + +/* The PCI address space for buffer handling looks like this: + + +-u32 wide-------------+ + | + + +-u64 wide------------------------------------+ + + + + +----------------------+ + | CurrentBufferPtr + Pointer to current PCI buffer >-+ + +----------------------+ | + | Unused + | + +----------------------+ | + | Pitch + = 188 (bytes) | + +----------------------+ | + | PCI buffer size + = pitch * number of lines (312) | + +----------------------+ | + |0| Buf0 Write Offset + | + +----------------------+ v + |1| Buf1 Write Offset + | + +----------------------+ | + |2| Buf2 Write Offset + | + +----------------------+ | + |3| Buf3 Write Offset + | + +----------------------+ | + ... More write offsets | + +---------------------------------------------+ | + +0| set of ptrs to PCI pagetables + | + +---------------------------------------------+ | + +1| set of ptrs to PCI pagetables + <--------+ + +---------------------------------------------+ + +2| set of ptrs to PCI pagetables + + +---------------------------------------------+ + +3| set of ptrs to PCI pagetables + >--+ + +---------------------------------------------+ | + ... More buffer pointers | +----------------+ + +->| pt[0] TS data | + | +----------------+ + | + | +----------------+ + +->| pt[1] TS data | + | +----------------+ + | etc + */ + +/* Allocate a new buffer structure and associated PCI space in bytes. + * len must be a multiple of sizeof(u64) + */ +struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_tsport *port, + u32 len) +{ + struct saa7164_buffer *buf = 0; + struct saa7164_dev *dev = port->dev; + int i; + + if ((len == 0) || (len >= 65536) || (len % sizeof(u64))) { + log_warn("%s() SAA_ERR_BAD_PARAMETER\n", __func__); + goto ret; + } + + buf = kzalloc(sizeof(struct saa7164_buffer), GFP_KERNEL); + if (buf == NULL) { + log_warn("%s() SAA_ERR_NO_RESOURCES\n", __func__); + goto ret; + } + + buf->port = port; + buf->flags = SAA7164_BUFFER_FREE; + /* TODO: arg len is being ignored */ + buf->pci_size = SAA7164_PT_ENTRIES * 0x1000; + buf->pt_size = (SAA7164_PT_ENTRIES * sizeof(u64)) + 0x1000; + + /* Allocate contiguous memory */ + buf->cpu = pci_alloc_consistent(port->dev->pci, buf->pci_size, + &buf->dma); + if (!buf->cpu) + goto fail1; + + buf->pt_cpu = pci_alloc_consistent(port->dev->pci, buf->pt_size, + &buf->pt_dma); + if (!buf->pt_cpu) + goto fail2; + + /* init the buffers to a known pattern, easier during debugging */ + memset(buf->cpu, 0xff, buf->pci_size); + memset(buf->pt_cpu, 0xff, buf->pt_size); + + dprintk(DBGLVL_BUF, "%s() allocated buffer @ 0x%p\n", __func__, buf); + dprintk(DBGLVL_BUF, " pci_cpu @ 0x%llx dma @ 0x%llx len = 0x%x\n", + (u64)buf->cpu, (u64)buf->dma, buf->pci_size); + dprintk(DBGLVL_BUF, " pt_cpu @ 0x%llx pt_dma @ 0x%llx len = 0x%x\n", + (u64)buf->pt_cpu, (u64)buf->pt_dma, buf->pt_size); + + /* Format the Page Table Entries to point into the data buffer */ + for (i = 0 ; i < SAA7164_PT_ENTRIES; i++) { + + *(buf->pt_cpu + i) = buf->dma + (i * 0x1000); /* TODO */ + + dprintk(DBGLVL_BUF, " pt[%02d] = 0x%llx -> 0x%llx\n", + i, (u64)buf->pt_cpu, (u64)*(buf->pt_cpu)); + + } + + goto ret; + +fail2: + pci_free_consistent(port->dev->pci, buf->pci_size, buf->cpu, buf->dma); +fail1: + kfree(buf); + + buf = 0; +ret: + return buf; +} + +int saa7164_buffer_dealloc(struct saa7164_tsport *port, + struct saa7164_buffer *buf) +{ + struct saa7164_dev *dev = port->dev; + + if ((buf == 0) || (port == 0)) + return SAA_ERR_BAD_PARAMETER; + + dprintk(DBGLVL_BUF, "%s() deallocating buffer @ 0x%p\n", __func__, buf); + + if (buf->flags != SAA7164_BUFFER_FREE) + log_warn(" freeing a non-free buffer\n"); + + pci_free_consistent(port->dev->pci, buf->pci_size, buf->cpu, buf->dma); + pci_free_consistent(port->dev->pci, buf->pt_size, buf->pt_cpu, + buf->pt_dma); + + kfree(buf); + + return SAA_OK; +} + diff --git a/drivers/media/video/saa7164/saa7164-bus.c b/drivers/media/video/saa7164/saa7164-bus.c new file mode 100644 index 00000000000..28f630dc49c --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-bus.c @@ -0,0 +1,448 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "saa7164.h" + +/* The message bus to/from the firmware is a ring buffer in PCI address + * space. Establish the defaults. + */ +int saa7164_bus_setup(struct saa7164_dev *dev) +{ + tmComResBusInfo_t *b = &dev->bus; + + mutex_init(&b->lock); + + b->Type = TYPE_BUS_PCIe; + b->m_wMaxReqSize = SAA_DEVICE_MAXREQUESTSIZE; + + b->m_pdwSetRing = (u8 *)(dev->bmmio + + ((u32)dev->busdesc.CommandRing)); + + b->m_dwSizeSetRing = SAA_DEVICE_BUFFERBLOCKSIZE; + + b->m_pdwGetRing = (u8 *)(dev->bmmio + + ((u32)dev->busdesc.ResponseRing)); + + b->m_dwSizeGetRing = SAA_DEVICE_BUFFERBLOCKSIZE; + + b->m_pdwSetWritePos = (u32 *)((u8 *)(dev->bmmio + + ((u32)dev->intfdesc.BARLocation) + (2 * sizeof(u64)))); + + b->m_pdwSetReadPos = (u32 *)((u8 *)b->m_pdwSetWritePos + + 1 * sizeof(u32)); + + b->m_pdwGetWritePos = (u32 *)((u8 *)b->m_pdwSetWritePos + + 2 * sizeof(u32)); + + b->m_pdwGetReadPos = (u32 *)((u8 *)b->m_pdwSetWritePos + + 3 * sizeof(u32)); + + return 0; +} + +void saa7164_bus_dump(struct saa7164_dev *dev) +{ + tmComResBusInfo_t *b = &dev->bus; + + dprintk(DBGLVL_BUS, "Dumping the bus structure:\n"); + dprintk(DBGLVL_BUS, " .type = %d\n", b->Type); + dprintk(DBGLVL_BUS, " .dev->bmmio = 0x%p\n", dev->bmmio); + dprintk(DBGLVL_BUS, " .m_wMaxReqSize = 0x%x\n", b->m_wMaxReqSize); + dprintk(DBGLVL_BUS, " .m_pdwSetRing = 0x%p\n", b->m_pdwSetRing); + dprintk(DBGLVL_BUS, " .m_dwSizeSetRing = 0x%x\n", b->m_dwSizeSetRing); + dprintk(DBGLVL_BUS, " .m_pdwGetRing = 0x%p\n", b->m_pdwGetRing); + dprintk(DBGLVL_BUS, " .m_dwSizeGetRing = 0x%x\n", b->m_dwSizeGetRing); + + dprintk(DBGLVL_BUS, " .m_pdwSetWritePos = 0x%p (0x%08x)\n", + b->m_pdwSetWritePos, *b->m_pdwSetWritePos); + + dprintk(DBGLVL_BUS, " .m_pdwSetReadPos = 0x%p (0x%08x)\n", + b->m_pdwSetReadPos, *b->m_pdwSetReadPos); + + dprintk(DBGLVL_BUS, " .m_pdwGetWritePos = 0x%p (0x%08x)\n", + b->m_pdwGetWritePos, *b->m_pdwGetWritePos); + + dprintk(DBGLVL_BUS, " .m_pdwGetReadPos = 0x%p (0x%08x)\n", + b->m_pdwGetReadPos, *b->m_pdwGetReadPos); +} + +void saa7164_bus_dumpmsg(struct saa7164_dev *dev, tmComResInfo_t* m, void *buf) +{ + dprintk(DBGLVL_BUS, "Dumping msg structure:\n"); + dprintk(DBGLVL_BUS, " .id = %d\n", m->id); + dprintk(DBGLVL_BUS, " .flags = 0x%x\n", m->flags); + dprintk(DBGLVL_BUS, " .size = 0x%x\n", m->size); + dprintk(DBGLVL_BUS, " .command = 0x%x\n", m->command); + dprintk(DBGLVL_BUS, " .controlselector = 0x%x\n", m->controlselector); + dprintk(DBGLVL_BUS, " .seqno = %d\n", m->seqno); + if (buf) + dprintk(DBGLVL_BUS, " .buffer (ignored)\n"); +} + +/* + * Places a command or a response on the bus. The implementation does not + * know if it is a command or a response it just places the data on the + * bus depending on the bus information given in the tmComResBusInfo_t + * structure. If the command or response does not fit into the bus ring + * buffer it will be refused. + * + * Return Value: + * SAA_OK The function executed successfully. + * < 0 One or more members are not initialized. + */ +int saa7164_bus_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf) +{ + tmComResBusInfo_t *bus = &dev->bus; + u32 bytes_to_write, read_distance, timeout, curr_srp, curr_swp; + u32 new_swp, space_rem; + int ret = SAA_ERR_BAD_PARAMETER; + + if (!msg) { + printk(KERN_ERR "%s() !msg\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + dprintk(DBGLVL_BUS, "%s()\n", __func__); + + msg->size = cpu_to_le16(msg->size); + msg->command = cpu_to_le16(msg->command); + msg->controlselector = cpu_to_le16(msg->controlselector); + + if (msg->size > dev->bus.m_wMaxReqSize) { + printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n", + __func__); + return SAA_ERR_BAD_PARAMETER; + } + + if ((msg->size > 0) && (buf == 0)) { + printk(KERN_ERR "%s() Missing message buffer\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + /* Lock the bus from any other access */ + mutex_lock(&bus->lock); + + bytes_to_write = sizeof(*msg) + msg->size; + read_distance = 0; + timeout = SAA_BUS_TIMEOUT; + curr_srp = le32_to_cpu(*bus->m_pdwSetReadPos); + curr_swp = le32_to_cpu(*bus->m_pdwSetWritePos); + + /* Deal with ring wrapping issues */ + if (curr_srp > curr_swp) + /* The ring has not wrapped yet */ + read_distance = curr_srp - curr_swp; + else + /* Deal with the wrapped ring */ + read_distance = (curr_srp + bus->m_dwSizeSetRing) - curr_swp; + + dprintk(DBGLVL_BUS, "%s() bytes_to_write = %d\n", __func__, + bytes_to_write); + + dprintk(DBGLVL_BUS, "%s() read_distance = %d\n", __func__, + read_distance); + + dprintk(DBGLVL_BUS, "%s() curr_srp = %x\n", __func__, curr_srp); + dprintk(DBGLVL_BUS, "%s() curr_swp = %x\n", __func__, curr_swp); + + /* Process the msg and write the content onto the bus */ + while (bytes_to_write >= read_distance) { + + if (timeout-- == 0) { + printk(KERN_ERR "%s() bus timeout\n", __func__); + ret = SAA_ERR_NO_RESOURCES; + goto out; + } + + /* TODO: Review this delay, efficient? */ + /* Wait, allowing the hardware fetch time */ + mdelay(1); + + /* Check the space usage again */ + curr_srp = le32_to_cpu(*bus->m_pdwSetReadPos); + + /* Deal with ring wrapping issues */ + if (curr_srp > curr_swp) + /* Read didn't wrap around the buffer */ + read_distance = curr_srp - curr_swp; + else + /* Deal with the wrapped ring */ + read_distance = (curr_srp + bus->m_dwSizeSetRing) - + curr_swp; + + } + + /* Calculate the new write position */ + new_swp = curr_swp + bytes_to_write; + + dprintk(DBGLVL_BUS, "%s() new_swp = %x\n", __func__, new_swp); + dprintk(DBGLVL_BUS, "%s() bus->m_dwSizeSetRing = %x\n", __func__, + bus->m_dwSizeSetRing); + + /* Mental Note: line 462 tmmhComResBusPCIe.cpp */ + + /* Check if we're going to wrap again */ + if (new_swp > bus->m_dwSizeSetRing) { + + /* Ring wraps */ + new_swp -= bus->m_dwSizeSetRing; + + space_rem = bus->m_dwSizeSetRing - curr_swp; + + dprintk(DBGLVL_BUS, "%s() space_rem = %x\n", __func__, + space_rem); + + dprintk(DBGLVL_BUS, "%s() sizeof(*msg) = %lu\n", __func__, + sizeof(*msg)); + + if (space_rem < sizeof(*msg)) { + dprintk(DBGLVL_BUS, "%s() tr4\n", __func__); + + /* Split the msg into pieces as the ring wraps */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, space_rem); + memcpy(bus->m_pdwSetRing, (u8 *)msg + space_rem, + sizeof(*msg) - space_rem); + + memcpy(bus->m_pdwSetRing + sizeof(*msg) - space_rem, + buf, msg->size); + + } else if (space_rem == sizeof(*msg)) { + dprintk(DBGLVL_BUS, "%s() tr5\n", __func__); + + /* Additional data at the beginning of the ring */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg)); + memcpy(bus->m_pdwSetRing, buf, msg->size); + + } else { + /* Additional data wraps around the ring */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg)); + if (msg->size > 0) { + memcpy(bus->m_pdwSetRing + curr_swp + + sizeof(*msg), buf, space_rem - + sizeof(*msg)); + memcpy(bus->m_pdwSetRing, (u8 *)buf + + space_rem - sizeof(*msg), + bytes_to_write - space_rem); + } + + } + + } /* (new_swp > bus->m_dwSizeSetRing) */ + else { + dprintk(DBGLVL_BUS, "%s() tr6\n", __func__); + + /* The ring buffer doesn't wrap, two simple copies */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg)); + memcpy(bus->m_pdwSetRing + curr_swp + sizeof(*msg), buf, + msg->size); + } + + dprintk(DBGLVL_BUS, "%s() new_swp = %x\n", __func__, new_swp); + + /* TODO: Convert all of the volatiles and direct PCI writes into + * saa7164_writel/b calls for consistency. + */ + + /* Update the bus write position */ + *bus->m_pdwSetWritePos = cpu_to_le32(new_swp); + ret = SAA_OK; + +out: + mutex_unlock(&bus->lock); + return ret; +} + +/* + * Receive a command or a response from the bus. The implementation does not + * know if it is a command or a response it simply dequeues the data, + * depending on the bus information given in the tmComResBusInfo_t structure. + * + * Return Value: + * 0 The function executed successfully. + * < 0 One or more members are not initialized. + */ +int saa7164_bus_get(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf, + int peekonly) +{ + tmComResBusInfo_t *bus = &dev->bus; + u32 bytes_to_read, write_distance, curr_grp, curr_gwp, + new_grp, buf_size, space_rem; + tmComResInfo_t msg_tmp; + int ret = SAA_ERR_BAD_PARAMETER; + + if (msg == 0) + return ret; + + if (msg->size > dev->bus.m_wMaxReqSize) { + printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n", + __func__); + return ret; + } + + if ((peekonly == 0) && (msg->size > 0) && (buf == 0)) { + printk(KERN_ERR + "%s() Missing msg buf, size should be %d bytes\n", + __func__, msg->size); + return ret; + } + + mutex_lock(&bus->lock); + + /* Peek the bus to see if a msg exists, if it's not what we're expecting + * then return cleanly else read the message from the bus. + */ + curr_gwp = le32_to_cpu(*bus->m_pdwGetWritePos); + curr_grp = le32_to_cpu(*bus->m_pdwGetReadPos); + + if (curr_gwp == curr_grp) { + dprintk(DBGLVL_BUS, "%s() No message on the bus\n", __func__); + ret = SAA_ERR_EMPTY; + goto out; + } + + bytes_to_read = sizeof(*msg); + + /* Calculate write distance to current read position */ + write_distance = 0; + if (curr_gwp >= curr_grp) + /* Write doesn't wrap around the ring */ + write_distance = curr_gwp - curr_grp; + else + /* Write wraps around the ring */ + write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp; + + if (bytes_to_read > write_distance) { + printk(KERN_ERR "%s() No message/response found\n", __func__); + ret = SAA_ERR_INVALID_COMMAND; + goto out; + } + + /* Calculate the new read position */ + new_grp = curr_grp + bytes_to_read; + if (new_grp > bus->m_dwSizeGetRing) { + + /* Ring wraps */ + new_grp -= bus->m_dwSizeGetRing; + space_rem = bus->m_dwSizeGetRing - curr_grp; + + memcpy(&msg_tmp, bus->m_pdwGetRing + curr_grp, space_rem); + memcpy((u8 *)&msg_tmp + space_rem, bus->m_pdwGetRing, + bytes_to_read - space_rem); + + } else { + /* No wrapping */ + memcpy(&msg_tmp, bus->m_pdwGetRing + curr_grp, bytes_to_read); + } + + /* No need to update the read positions, because this was a peek */ + /* If the caller specifically want to peek, return */ + if (peekonly) { + memcpy(msg, &msg_tmp, sizeof(*msg)); + goto peekout; + } + + /* Check if the command/response matches what is expected */ + if ((msg_tmp.id != msg->id) || (msg_tmp.command != msg->command) || + (msg_tmp.controlselector != msg->controlselector) || + (msg_tmp.seqno != msg->seqno) || (msg_tmp.size != msg->size)) { + + printk(KERN_ERR "%s() Unexpected msg miss-match\n", __func__); + saa7164_bus_dumpmsg(dev, msg, buf); + saa7164_bus_dumpmsg(dev, &msg_tmp, 0); + ret = SAA_ERR_INVALID_COMMAND; + goto out; + } + + /* Get the actual command and response from the bus */ + buf_size = msg->size; + + bytes_to_read = sizeof(*msg) + msg->size; + /* Calculate write distance to current read position */ + write_distance = 0; + if (curr_gwp >= curr_grp) + /* Write doesn't wrap around the ring */ + write_distance = curr_gwp - curr_grp; + else + /* Write wraps around the ring */ + write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp; + + if (bytes_to_read > write_distance) { + printk(KERN_ERR "%s() Invalid bus state, missing msg " + "or mangled ring, faulty H/W / bad code?\n", __func__); + ret = SAA_ERR_INVALID_COMMAND; + goto out; + } + + /* Calculate the new read position */ + new_grp = curr_grp + bytes_to_read; + if (new_grp > bus->m_dwSizeGetRing) { + + /* Ring wraps */ + new_grp -= bus->m_dwSizeGetRing; + space_rem = bus->m_dwSizeGetRing - curr_grp; + + if (space_rem < sizeof(*msg)) { + /* msg wraps around the ring */ + memcpy(msg, bus->m_pdwGetRing + curr_grp, space_rem); + memcpy((u8 *)msg + space_rem, bus->m_pdwGetRing, + sizeof(*msg) - space_rem); + if (buf) + memcpy(buf, bus->m_pdwGetRing + sizeof(*msg) - + space_rem, buf_size); + + } else if (space_rem == sizeof(*msg)) { + memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg)); + if (buf) + memcpy(buf, bus->m_pdwGetRing, buf_size); + } else { + /* Additional data wraps around the ring */ + memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg)); + if (buf) { + memcpy(buf, bus->m_pdwGetRing + curr_grp + + sizeof(*msg), space_rem - sizeof(*msg)); + memcpy(buf + space_rem - sizeof(*msg), + bus->m_pdwGetRing, bytes_to_read - + space_rem); + } + + } + + } else { + /* No wrapping */ + memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg)); + if (buf) + memcpy(buf, bus->m_pdwGetRing + curr_grp + sizeof(*msg), + buf_size); + } + + /* Update the read positions, adjusting the ring */ + *bus->m_pdwGetReadPos = cpu_to_le32(new_grp); + +peekout: + msg->size = le16_to_cpu(msg->size); + msg->command = le16_to_cpu(msg->command); + msg->controlselector = le16_to_cpu(msg->controlselector); + ret = SAA_OK; +out: + mutex_unlock(&bus->lock); + return ret; +} + diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c new file mode 100644 index 00000000000..0678b5f31bd --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-cards.c @@ -0,0 +1,562 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include "saa7164.h" + +/* The Bridge API needs to understand register widths (in bytes) for the + * attached I2C devices, so we can simplify the virtual i2c mechansms + * and keep the -i2c.c implementation clean. + */ +#define REGLEN_8bit 1 +#define REGLEN_16bit 2 + +struct saa7164_board saa7164_boards[] = { + [SAA7164_BOARD_UNKNOWN] = { + /* Bridge will not load any firmware, without knowing + * the rev this would be fatal. */ + .name = "Unknown", + }, + [SAA7164_BOARD_UNKNOWN_REV2] = { + /* Bridge will load the v2 f/w and dump descriptors */ + /* Required during new board bringup */ + .name = "Generic Rev2", + .chiprev = SAA7164_CHIP_REV2, + }, + [SAA7164_BOARD_UNKNOWN_REV3] = { + /* Bridge will load the v2 f/w and dump descriptors */ + /* Required during new board bringup */ + .name = "Generic Rev3", + .chiprev = SAA7164_CHIP_REV3, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x06, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_2] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV2, + .unit = {{ + .id = 0x06, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_3] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV2, + .unit = {{ + .id = 0x06, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1c, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2250] = { + .name = "Hauppauge WinTV-HVR2250", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x22, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x07, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x08, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x20, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x23, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2250_2] = { + .name = "Hauppauge WinTV-HVR2250", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x22, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x07, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x08, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x24, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x26, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x29, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, +}; +const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards); + +/* ------------------------------------------------------------------ */ +/* PCI subsystem IDs */ + +struct saa7164_subid saa7164_subids[] = { + { + .subvendor = 0x0070, + .subdevice = 0x8880, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250, + }, { + .subvendor = 0x0070, + .subdevice = 0x8810, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250, + }, { + .subvendor = 0x0070, + .subdevice = 0x8980, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200, + }, { + .subvendor = 0x0070, + .subdevice = 0x8900, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8901, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_3, + }, { + .subvendor = 0x0070, + .subdevice = 0x88A1, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8891, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, +}; +const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids); + +void saa7164_card_list(struct saa7164_dev *dev) +{ + int i; + + if (0 == dev->pci->subsystem_vendor && + 0 == dev->pci->subsystem_device) { + printk(KERN_ERR + "%s: Board has no valid PCIe Subsystem ID and can't\n" + "%s: be autodetected. Pass card= insmod option to\n" + "%s: workaround that. Send complaints to the vendor\n" + "%s: of the TV card. Best regards,\n" + "%s: -- tux\n", + dev->name, dev->name, dev->name, dev->name, dev->name); + } else { + printk(KERN_ERR + "%s: Your board isn't known (yet) to the driver.\n" + "%s: Try to pick one of the existing card configs via\n" + "%s: card= insmod option. Updating to the latest\n" + "%s: version might help as well.\n", + dev->name, dev->name, dev->name, dev->name); + } + + printk(KERN_ERR "%s: Here are valid choices for the card= insmod " + "option:\n", dev->name); + + for (i = 0; i < saa7164_bcount; i++) + printk(KERN_ERR "%s: card=%d -> %s\n", + dev->name, i, saa7164_boards[i].name); +} + +/* TODO: clean this define up into the -cards.c structs */ +#define PCIEBRIDGE_UNITID 2 + +void saa7164_gpio_setup(struct saa7164_dev *dev) +{ + + + switch (dev->board) { + case SAA7164_BOARD_HAUPPAUGE_HVR2200: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2250: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + /* + GPIO 2: s5h1411 / tda10048-1 demod reset + GPIO 3: s5h1411 / tda10048-2 demod reset + GPIO 7: IRBlaster Zilog reset + */ + + /* Reset parts by going in and out of reset */ + saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2); + saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3); + + msleep(10); + + saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2); + saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3); + break; + } + +} + +static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data) +{ + struct tveeprom tv; + + /* TODO: Assumption: eeprom on bus 0 */ + tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, + eeprom_data); + + /* Make sure we support the board model */ + switch (tv.model) { + case 88001: + /* Development board - Limit circulation */ + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */ + case 88021: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */ + break; + case 88041: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */ + break; + case 88061: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, FM */ + break; + case 89519: + case 89609: + /* WinTV-HVR2200 (PCIe, Retail, full-height) + * DVB-T (TDA18271/TDA10048) and basic analog, no IR */ + break; + case 89619: + /* WinTV-HVR2200 (PCIe, Retail, half-height) + * DVB-T (TDA18271/TDA10048) and basic analog, no IR */ + break; + default: + printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n", + dev->name, tv.model); + break; + } + + printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name, + tv.model); +} + +void saa7164_card_setup(struct saa7164_dev *dev) +{ + static u8 eeprom[256]; + + if (dev->i2c_bus[0].i2c_rc == 0) { + if (saa7164_api_read_eeprom(dev, &eeprom[0], + sizeof(eeprom)) < 0) + return; + } + + switch (dev->board) { + case SAA7164_BOARD_HAUPPAUGE_HVR2200: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2250: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + hauppauge_eeprom(dev, &eeprom[0]); + break; + } +} + +/* With most other drivers, the kernel expects to communicate with subdrivers + * through i2c. This bridge does not allow that, it does not expose any direct + * access to I2C. Instead we have to communicate through the device f/w for + * register access to 'processing units'. Each unit has a unique + * id, regardless of how the physical implementation occurs across + * the three physical i2c busses. The being said if we want leverge of + * the existing kernel drivers for tuners and demods we have to 'speak i2c', + * to this bridge implements 3 virtual i2c buses. This is a helper function + * for those. + * + * Description: Translate the kernels notion of an i2c address and bus into + * the appropriate unitid. + */ +int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr) +{ + /* For a given bus and i2c device address, return the saa7164 unique + * unitid. < 0 on error */ + + struct saa7164_dev *dev = bus->dev; + struct saa7164_unit *unit; + int i; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + if ((bus->nr == unit->i2c_bus_nr) && + (addr == unit->i2c_bus_addr)) + return unit->id; + } + + return -1; +} + +/* The 7164 API needs to know the i2c register length in advance. + * this is a helper function. Based on a specific chip addr and bus return the + * reg length. + */ +int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr) +{ + /* For a given bus and i2c device address, return the + * saa7164 registry address width. < 0 on error + */ + + struct saa7164_dev *dev = bus->dev; + struct saa7164_unit *unit; + int i; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + + if ((bus->nr == unit->i2c_bus_nr) && + (addr == unit->i2c_bus_addr)) + return unit->i2c_reg_len; + } + + return -1; +} +/* TODO: implement a 'findeeprom' functio like the above and fix any other + * eeprom related todo's in -api.c. + */ + +/* Translate a unitid into a x readable device name, for display purposes. */ +char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid) +{ + char *undefed = "UNDEFINED"; + char *bridge = "BRIDGE"; + struct saa7164_unit *unit; + int i; + + if (unitid == 0) + return bridge; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + + if (unitid == unit->id) + return unit->name; + } + + return undefed; +} + diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c new file mode 100644 index 00000000000..0c3585bb232 --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-cmd.c @@ -0,0 +1,529 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include "saa7164.h" + +int saa7164_cmd_alloc_seqno(struct saa7164_dev *dev) +{ + int i, ret = -1; + + mutex_lock(&dev->lock); + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + if (dev->cmds[i].inuse == 0) { + dev->cmds[i].inuse = 1; + dev->cmds[i].signalled = 0; + dev->cmds[i].timeout = 0; + ret = dev->cmds[i].seqno; + break; + } + } + mutex_unlock(&dev->lock); + + return ret; +} + +void saa7164_cmd_free_seqno(struct saa7164_dev *dev, u8 seqno) +{ + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + dev->cmds[seqno].inuse = 0; + dev->cmds[seqno].signalled = 0; + dev->cmds[seqno].timeout = 0; + } + mutex_unlock(&dev->lock); +} + +void saa7164_cmd_timeout_seqno(struct saa7164_dev *dev, u8 seqno) +{ + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + dev->cmds[seqno].timeout = 1; + } + mutex_unlock(&dev->lock); +} + +u32 saa7164_cmd_timeout_get(struct saa7164_dev *dev, u8 seqno) +{ + int ret = 0; + + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + ret = dev->cmds[seqno].timeout; + } + mutex_unlock(&dev->lock); + + return ret; +} + +/* Commands to the f/w get marshelled to/from this code then onto the PCI + * -bus/c running buffer. */ +int saa7164_cmd_dequeue(struct saa7164_dev *dev) +{ + int loop = 1; + int ret; + u32 timeout; + wait_queue_head_t *q = 0; + u8 tmp[512]; + dprintk(DBGLVL_CMD, "%s()\n", __func__); + + while (loop) { + + tmComResInfo_t tRsp = { 0, 0, 0, 0, 0, 0 }; + ret = saa7164_bus_get(dev, &tRsp, NULL, 1); + if (ret == SAA_ERR_EMPTY) + return SAA_OK; + + if (ret != SAA_OK) + return ret; + + q = &dev->cmds[tRsp.seqno].wait; + timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno); + dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout); + if (timeout) { + printk(KERN_ERR "found timed out command on the bus\n"); + + /* Clean the bus */ + ret = saa7164_bus_get(dev, &tRsp, &tmp, 0); + printk(KERN_ERR "ret = %x\n", ret); + if (ret == SAA_ERR_EMPTY) + /* Someone else already fetched the response */ + return SAA_OK; + + if (ret != SAA_OK) + return ret; + + if (tRsp.flags & PVC_CMDFLAG_CONTINUE) + printk(KERN_ERR "split response\n"); + else + saa7164_cmd_free_seqno(dev, tRsp.seqno); + + printk(KERN_ERR " timeout continue\n"); + continue; + } + + dprintk(DBGLVL_CMD, "%s() signalled seqno(%d) (for dequeue)\n", + __func__, tRsp.seqno); + dev->cmds[tRsp.seqno].signalled = 1; + wake_up(q); + return SAA_OK; + } + + return SAA_OK; +} + +int saa7164_cmd_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf) +{ + tmComResBusInfo_t *bus = &dev->bus; + u8 cmd_sent; + u16 size, idx; + u32 cmds; + void *tmp; + int ret = -1; + + if (!msg) { + printk(KERN_ERR "%s() !msg\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + mutex_lock(&dev->cmds[msg->id].lock); + + size = msg->size; + idx = 0; + cmds = size / bus->m_wMaxReqSize; + if (size % bus->m_wMaxReqSize == 0) + cmds -= 1; + + cmd_sent = 0; + + /* Split the request into smaller chunks */ + for (idx = 0; idx < cmds; idx++) { + + msg->flags |= SAA_CMDFLAG_CONTINUE; + msg->size = bus->m_wMaxReqSize; + tmp = buf + idx * bus->m_wMaxReqSize; + + ret = saa7164_bus_set(dev, msg, tmp); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() set failed %d\n", __func__, ret); + + if (cmd_sent) { + ret = SAA_ERR_BUSY; + goto out; + } + ret = SAA_ERR_OVERFLOW; + goto out; + } + cmd_sent = 1; + } + + /* If not the last command... */ + if (idx != 0) + msg->flags &= ~SAA_CMDFLAG_CONTINUE; + + msg->size = size - idx * bus->m_wMaxReqSize; + + ret = saa7164_bus_set(dev, msg, buf + idx * bus->m_wMaxReqSize); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() set last failed %d\n", __func__, ret); + + if (cmd_sent) { + ret = SAA_ERR_BUSY; + goto out; + } + ret = SAA_ERR_OVERFLOW; + goto out; + } + ret = SAA_OK; + +out: + mutex_unlock(&dev->cmds[msg->id].lock); + return ret; +} + +/* Wait for a signal event, without holding a mutex. Either return TIMEOUT if + * the event never occured, or SAA_OK if it was signaled during the wait. + */ +int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno) +{ + wait_queue_head_t *q = 0; + int ret = SAA_BUS_TIMEOUT; + unsigned long stamp; + int r; + + if (debug >= 4) + saa7164_bus_dump(dev); + + dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno); + + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + q = &dev->cmds[seqno].wait; + } + mutex_unlock(&dev->lock); + + if (q) { + /* If we haven't been signalled we need to wait */ + if (dev->cmds[seqno].signalled == 0) { + stamp = jiffies; + dprintk(DBGLVL_CMD, + "%s(seqno=%d) Waiting (signalled=%d)\n", + __func__, seqno, dev->cmds[seqno].signalled); + + /* Wait for signalled to be flagged or timeout */ + wait_event_timeout(*q, dev->cmds[seqno].signalled, HZ); + r = time_before(jiffies, stamp + HZ); + if (r) + ret = SAA_OK; + else + saa7164_cmd_timeout_seqno(dev, seqno); + + dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d " + "(signalled=%d)\n", __func__, seqno, r, + dev->cmds[seqno].signalled); + } else + ret = SAA_OK; + } else + printk(KERN_ERR "%s(seqno=%d) seqno is invalid\n", + __func__, seqno); + + return ret; +} + +void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno) +{ + int i; + dprintk(DBGLVL_CMD, "%s()\n", __func__); + + mutex_lock(&dev->lock); + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + if (dev->cmds[i].inuse == 1) { + dprintk(DBGLVL_CMD, + "seqno %d inuse, sig = %d, t/out = %d\n", + dev->cmds[i].seqno, + dev->cmds[i].signalled, + dev->cmds[i].timeout); + } + } + + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + if ((dev->cmds[i].inuse == 1) && ((i == 0) || + (dev->cmds[i].signalled) || (dev->cmds[i].timeout))) { + dprintk(DBGLVL_CMD, "%s(seqno=%d) calling wake_up\n", + __func__, i); + dev->cmds[i].signalled = 1; + wake_up(&dev->cmds[i].wait); + } + } + mutex_unlock(&dev->lock); +} + +int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, tmComResCmd_t command, + u16 controlselector, u16 size, void *buf) +{ + tmComResInfo_t command_t, *pcommand_t; + tmComResInfo_t response_t, *presponse_t; + u8 errdata[256]; + u16 resp_dsize; + u16 data_recd; + u32 loop; + int ret; + int safety = 0; + + dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, " + "sel = 0x%x)\n", __func__, saa7164_unitid_name(dev, id), id, + command, controlselector); + + if ((size == 0) || (buf == 0)) { + printk(KERN_ERR "%s() Invalid param\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + /* Prepare some basic command/response structures */ + memset(&command_t, 0, sizeof(command_t)); + memset(&response_t, 0, sizeof(&response_t)); + pcommand_t = &command_t; + presponse_t = &response_t; + command_t.id = id; + command_t.command = command; + command_t.controlselector = controlselector; + command_t.size = size; + + /* Allocate a unique sequence number */ + ret = saa7164_cmd_alloc_seqno(dev); + if (ret < 0) { + printk(KERN_ERR "%s() No free sequences\n", __func__); + ret = SAA_ERR_NO_RESOURCES; + goto out; + } + + command_t.seqno = (u8)ret; + + /* Send Command */ + resp_dsize = size; + pcommand_t->size = size; + + dprintk(DBGLVL_CMD, "%s() pcommand_t.seqno = %d\n", + __func__, pcommand_t->seqno); + + dprintk(DBGLVL_CMD, "%s() pcommand_t.size = %d\n", + __func__, pcommand_t->size); + + ret = saa7164_cmd_set(dev, pcommand_t, buf); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() set command failed %d\n", __func__, ret); + + if (ret != SAA_ERR_BUSY) + saa7164_cmd_free_seqno(dev, pcommand_t->seqno); + else + /* Flag a timeout, because at least one + * command was sent */ + saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno); + + goto out; + } + + /* With split responses we have to collect the msgs piece by piece */ + data_recd = 0; + loop = 1; + while (loop) { + dprintk(DBGLVL_CMD, "%s() loop\n", __func__); + + ret = saa7164_cmd_wait(dev, pcommand_t->seqno); + dprintk(DBGLVL_CMD, "%s() loop ret = %d\n", __func__, ret); + + /* if power is down and this is not a power command ... */ + + if (ret == SAA_BUS_TIMEOUT) { + printk(KERN_ERR "Event timed out\n"); + saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno); + return ret; + } + + if (ret != SAA_OK) { + printk(KERN_ERR "spurious error\n"); + return ret; + } + + /* Peek response */ + ret = saa7164_bus_get(dev, presponse_t, NULL, 1); + if (ret == SAA_ERR_EMPTY) { + dprintk(4, "%s() SAA_ERR_EMPTY\n", __func__); + continue; + } + if (ret != SAA_OK) { + printk(KERN_ERR "peek failed\n"); + return ret; + } + + dprintk(DBGLVL_CMD, "%s() presponse_t->seqno = %d\n", + __func__, presponse_t->seqno); + + dprintk(DBGLVL_CMD, "%s() presponse_t->flags = 0x%x\n", + __func__, presponse_t->flags); + + dprintk(DBGLVL_CMD, "%s() presponse_t->size = %d\n", + __func__, presponse_t->size); + + /* Check if the response was for our command */ + if (presponse_t->seqno != pcommand_t->seqno) { + + dprintk(DBGLVL_CMD, + "wrong event: seqno = %d, " + "expected seqno = %d, " + "will dequeue regardless\n", + presponse_t->seqno, pcommand_t->seqno); + + ret = saa7164_cmd_dequeue(dev); + if (ret != SAA_OK) { + printk(KERN_ERR "dequeue failed, ret = %d\n", + ret); + if (safety++ > 16) { + printk(KERN_ERR + "dequeue exceeded, safety exit\n"); + return SAA_ERR_BUSY; + } + } + + continue; + } + + if ((presponse_t->flags & PVC_RESPONSEFLAG_ERROR) != 0) { + + memset(&errdata[0], 0, sizeof(errdata)); + + ret = saa7164_bus_get(dev, presponse_t, &errdata[0], 0); + if (ret != SAA_OK) { + printk(KERN_ERR "get error(2)\n"); + return ret; + } + + saa7164_cmd_free_seqno(dev, pcommand_t->seqno); + + dprintk(DBGLVL_CMD, "%s() errdata %02x%02x%02x%02x\n", + __func__, errdata[0], errdata[1], errdata[2], + errdata[3]); + + /* Map error codes */ + dprintk(DBGLVL_CMD, "%s() cmd, error code = 0x%x\n", + __func__, errdata[0]); + + switch (errdata[0]) { + case PVC_ERRORCODE_INVALID_COMMAND: + dprintk(DBGLVL_CMD, "%s() INVALID_COMMAND\n", + __func__); + ret = SAA_ERR_INVALID_COMMAND; + break; + case PVC_ERRORCODE_INVALID_DATA: + dprintk(DBGLVL_CMD, "%s() INVALID_DATA\n", + __func__); + ret = SAA_ERR_BAD_PARAMETER; + break; + case PVC_ERRORCODE_TIMEOUT: + dprintk(DBGLVL_CMD, "%s() TIMEOUT\n", __func__); + ret = SAA_ERR_TIMEOUT; + break; + case PVC_ERRORCODE_NAK: + dprintk(DBGLVL_CMD, "%s() NAK\n", __func__); + ret = SAA_ERR_NULL_PACKET; + break; + case PVC_ERRORCODE_UNKNOWN: + case PVC_ERRORCODE_INVALID_CONTROL: + dprintk(DBGLVL_CMD, + "%s() UNKNOWN OR INVALID CONTROL\n", + __func__); + default: + dprintk(DBGLVL_CMD, "%s() UNKNOWN\n", __func__); + ret = SAA_ERR_NOT_SUPPORTED; + } + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(2) failed\n"); + + return ret; + } + + /* If response is invalid */ + if ((presponse_t->id != pcommand_t->id) || + (presponse_t->command != pcommand_t->command) || + (presponse_t->controlselector != + pcommand_t->controlselector) || + (((resp_dsize - data_recd) != presponse_t->size) && + !(presponse_t->flags & PVC_CMDFLAG_CONTINUE)) || + ((resp_dsize - data_recd) < presponse_t->size)) { + + /* Invalid */ + dprintk(DBGLVL_CMD, "%s() Invalid\n", __func__); + ret = saa7164_bus_get(dev, presponse_t, 0, 0); + if (ret != SAA_OK) { + printk(KERN_ERR "get failed\n"); + return ret; + } + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(3) failed\n"); + continue; + } + + /* OK, now we're actually getting out correct response */ + ret = saa7164_bus_get(dev, presponse_t, buf + data_recd, 0); + if (ret != SAA_OK) { + printk(KERN_ERR "get failed\n"); + return ret; + } + + data_recd = presponse_t->size + data_recd; + if (resp_dsize == data_recd) { + dprintk(DBGLVL_CMD, "%s() Resp recd\n", __func__); + break; + } + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(3) failed\n"); + + continue; + + } /* (loop) */ + + /* Release the sequence number allocation */ + saa7164_cmd_free_seqno(dev, pcommand_t->seqno); + + /* if powerdown signal all pending commands */ + + dprintk(DBGLVL_CMD, "%s() Calling dequeue then exit\n", __func__); + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(4) failed\n"); + + ret = SAA_OK; +out: + return ret; +} + diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c new file mode 100644 index 00000000000..04957090f83 --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-core.c @@ -0,0 +1,746 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "saa7164.h" + +MODULE_DESCRIPTION("Driver for NXP SAA7164 based TV cards"); +MODULE_AUTHOR("Steven Toth "); +MODULE_LICENSE("GPL"); + +/* + 1 Basic + 2 + 4 i2c + 8 api + 16 cmd + 32 bus + */ + +unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +static unsigned int card[] = {[0 ... (SAA7164_MAXBOARDS - 1)] = UNSET }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card, "card type"); + +static unsigned int saa7164_devcount; + +static DEFINE_MUTEX(devlist); +LIST_HEAD(saa7164_devlist); + +#define INT_SIZE 16 + +static void saa7164_work_cmdhandler(struct work_struct *w) +{ + struct saa7164_dev *dev = container_of(w, struct saa7164_dev, workcmd); + + /* Wake up any complete commands */ + saa7164_cmd_signal(dev, 0); +} + +static void saa7164_buffer_deliver(struct saa7164_buffer *buf) +{ + struct saa7164_tsport *port = buf->port; + + /* Feed the transport payload into the kernel demux */ + dvb_dmx_swfilter_packets(&port->dvb.demux, buf->cpu, + SAA7164_TS_NUMBER_OF_LINES); + +} + +static irqreturn_t saa7164_irq_ts(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct list_head *c, *n; + int wp, i = 0, rp; + + /* Find the current write point from the hardware */ + wp = saa7164_readl(port->bufcounter); + if (wp > (port->hwcfg.buffercount - 1)) + BUG(); + + /* Find the previous buffer to the current write point */ + if (wp == 0) + rp = 7; + else + rp = wp - 1; + + /* Lookup the WP in the buffer list */ + /* TODO: turn this into a worker thread */ + list_for_each_safe(c, n, &port->dmaqueue.list) { + buf = list_entry(c, struct saa7164_buffer, list); + if (i++ > port->hwcfg.buffercount) + BUG(); + + if (buf->nr == rp) { + /* Found the buffer, deal with it */ + dprintk(DBGLVL_IRQ, "%s() wp: %d processing: %d\n", + __func__, wp, rp); + saa7164_buffer_deliver(buf); + break; + } + + } + return 0; +} + +/* Primary IRQ handler and dispatch mechanism */ +static irqreturn_t saa7164_irq(int irq, void *dev_id) +{ + struct saa7164_dev *dev = dev_id; + u32 hwacc = 0, interruptid; + u32 intstat[INT_SIZE/4]; + int i, handled = 0, bit; + + /* Check that the hardware is accessable. If the status bytes are + * 0xFF then the device is not accessable, the the IRQ belongs + * to another driver. + */ + for (i = 0; i < INT_SIZE/4; i++) { + + /* TODO: Convert into saa7164_readl() */ + /* Read the 4 hardware interrupt registers */ + intstat[i] = *(dev->InterruptStatus + i); + + if (intstat[i] != 0xffffffff) + hwacc = 1; + } + if (hwacc == 0) { + handled = 0; + goto out; + } + + handled = 1; + + /* For each of the HW interrupt registers */ + for (i = 0; i < INT_SIZE/4; i++) { + + if (intstat[i]) { + /* Each function of the board has it's own interruptid. + * Find the function that triggered then call + * it's handler. + */ + for (bit = 0; bit < 32; bit++) { + + if (((intstat[i] >> bit) & 0x00000001) == 0) + continue; + + /* Calculate the interrupt id (0x00 to 0x7f) */ + + interruptid = (i * 32) + bit; + if (interruptid == dev->intfdesc.bInterruptId) { + /* A response to an cmd/api call */ + schedule_work(&dev->workcmd); + } else if (interruptid == + dev->ts1.hwcfg.interruptid) { + + /* Transport path 1 */ + saa7164_irq_ts(&dev->ts1); + + } else if (interruptid == + dev->ts2.hwcfg.interruptid) { + + /* Transport path 2 */ + saa7164_irq_ts(&dev->ts2); + + } else { + /* Find the function */ + dprintk(DBGLVL_IRQ, + "%s() unhandled interrupt " + "reg 0x%x bit 0x%x " + "intid = 0x%x\n", + __func__, i, bit, interruptid); + } + } + + /* TODO: Convert into saa7164_writel() */ + /* Ack it */ + *(dev->InterruptAck + i) = intstat[i]; + + } + } +out: + return IRQ_RETVAL(handled); +} + +void saa7164_getfirmwarestatus(struct saa7164_dev *dev) +{ + struct saa7164_fw_status *s = &dev->fw_status; + + dev->fw_status.status = saa7164_readl(SAA_DEVICE_SYSINIT_STATUS); + dev->fw_status.mode = saa7164_readl(SAA_DEVICE_SYSINIT_MODE); + dev->fw_status.spec = saa7164_readl(SAA_DEVICE_SYSINIT_SPEC); + dev->fw_status.inst = saa7164_readl(SAA_DEVICE_SYSINIT_INST); + dev->fw_status.cpuload = saa7164_readl(SAA_DEVICE_SYSINIT_CPULOAD); + dev->fw_status.remainheap = + saa7164_readl(SAA_DEVICE_SYSINIT_REMAINHEAP); + + dprintk(1, "Firmware status:\n"); + dprintk(1, " .status = 0x%08x\n", s->status); + dprintk(1, " .mode = 0x%08x\n", s->mode); + dprintk(1, " .spec = 0x%08x\n", s->spec); + dprintk(1, " .inst = 0x%08x\n", s->inst); + dprintk(1, " .cpuload = 0x%08x\n", s->cpuload); + dprintk(1, " .remainheap = 0x%08x\n", s->remainheap); +} + +u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev) +{ + u32 reg; + + reg = saa7164_readl(SAA_DEVICE_VERSION); + dprintk(1, "Device running firmware version %d.%d.%d.%d (0x%x)\n", + (reg & 0x0000fc00) >> 10, + (reg & 0x000003e0) >> 5, + (reg & 0x0000001f), + (reg & 0xffff0000) >> 16, + reg); + + return reg; +} + +/* TODO: Debugging func, remove */ +void saa7164_dumphex16(struct saa7164_dev *dev, u8 *buf, int len) +{ + int i; + + printk(KERN_INFO "--------------------> " + "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); + + for (i = 0; i < len; i += 16) + printk(KERN_INFO " [0x%08x] " + "%02x %02x %02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, + *(buf+i+0), *(buf+i+1), *(buf+i+2), *(buf+i+3), + *(buf+i+4), *(buf+i+5), *(buf+i+6), *(buf+i+7), + *(buf+i+8), *(buf+i+9), *(buf+i+10), *(buf+i+11), + *(buf+i+12), *(buf+i+13), *(buf+i+14), *(buf+i+15)); +} + +/* TODO: Debugging func, remove */ +void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr) +{ + int i; + + dprintk(1, "--------------------> " + "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); + + for (i = 0; i < 0x100; i += 16) + dprintk(1, "region0[0x%08x] = " + "%02x %02x %02x %02x %02x %02x %02x %02x" + " %02x %02x %02x %02x %02x %02x %02x %02x\n", i, + (u8)saa7164_readb(addr + i + 0), + (u8)saa7164_readb(addr + i + 1), + (u8)saa7164_readb(addr + i + 2), + (u8)saa7164_readb(addr + i + 3), + (u8)saa7164_readb(addr + i + 4), + (u8)saa7164_readb(addr + i + 5), + (u8)saa7164_readb(addr + i + 6), + (u8)saa7164_readb(addr + i + 7), + (u8)saa7164_readb(addr + i + 8), + (u8)saa7164_readb(addr + i + 9), + (u8)saa7164_readb(addr + i + 10), + (u8)saa7164_readb(addr + i + 11), + (u8)saa7164_readb(addr + i + 12), + (u8)saa7164_readb(addr + i + 13), + (u8)saa7164_readb(addr + i + 14), + (u8)saa7164_readb(addr + i + 15) + ); +} + +static void saa7164_dump_hwdesc(struct saa7164_dev *dev) +{ + dprintk(1, "@0x%p hwdesc sizeof(tmComResHWDescr_t) = %lu bytes\n", + &dev->hwdesc, sizeof(tmComResHWDescr_t)); + + dprintk(1, " .bLength = 0x%x\n", dev->hwdesc.bLength); + dprintk(1, " .bDescriptorType = 0x%x\n", dev->hwdesc.bDescriptorType); + dprintk(1, " .bDescriptorSubtype = 0x%x\n", + dev->hwdesc.bDescriptorSubtype); + + dprintk(1, " .bcdSpecVersion = 0x%x\n", dev->hwdesc.bcdSpecVersion); + dprintk(1, " .dwClockFrequency = 0x%x\n", dev->hwdesc.dwClockFrequency); + dprintk(1, " .dwClockUpdateRes = 0x%x\n", dev->hwdesc.dwClockUpdateRes); + dprintk(1, " .bCapabilities = 0x%x\n", dev->hwdesc.bCapabilities); + dprintk(1, " .dwDeviceRegistersLocation = 0x%x\n", + dev->hwdesc.dwDeviceRegistersLocation); + + dprintk(1, " .dwHostMemoryRegion = 0x%x\n", + dev->hwdesc.dwHostMemoryRegion); + + dprintk(1, " .dwHostMemoryRegionSize = 0x%x\n", + dev->hwdesc.dwHostMemoryRegionSize); + + dprintk(1, " .dwHostHibernatMemRegion = 0x%x\n", + dev->hwdesc.dwHostHibernatMemRegion); + + dprintk(1, " .dwHostHibernatMemRegionSize = 0x%x\n", + dev->hwdesc.dwHostHibernatMemRegionSize); +} + +static void saa7164_dump_intfdesc(struct saa7164_dev *dev) +{ + dprintk(1, "@0x%p intfdesc " + "sizeof(tmComResInterfaceDescr_t) = %lu bytes\n", + &dev->intfdesc, sizeof(tmComResInterfaceDescr_t)); + + dprintk(1, " .bLength = 0x%x\n", dev->intfdesc.bLength); + dprintk(1, " .bDescriptorType = 0x%x\n", dev->intfdesc.bDescriptorType); + dprintk(1, " .bDescriptorSubtype = 0x%x\n", + dev->intfdesc.bDescriptorSubtype); + + dprintk(1, " .bFlags = 0x%x\n", dev->intfdesc.bFlags); + dprintk(1, " .bInterfaceType = 0x%x\n", dev->intfdesc.bInterfaceType); + dprintk(1, " .bInterfaceId = 0x%x\n", dev->intfdesc.bInterfaceId); + dprintk(1, " .bBaseInterface = 0x%x\n", dev->intfdesc.bBaseInterface); + dprintk(1, " .bInterruptId = 0x%x\n", dev->intfdesc.bInterruptId); + dprintk(1, " .bDebugInterruptId = 0x%x\n", + dev->intfdesc.bDebugInterruptId); + + dprintk(1, " .BARLocation = 0x%x\n", dev->intfdesc.BARLocation); +} + +static void saa7164_dump_busdesc(struct saa7164_dev *dev) +{ + dprintk(1, "@0x%p busdesc sizeof(tmComResBusDescr_t) = %lu bytes\n", + &dev->busdesc, sizeof(tmComResBusDescr_t)); + + dprintk(1, " .CommandRing = 0x%016Lx\n", dev->busdesc.CommandRing); + dprintk(1, " .ResponseRing = 0x%016Lx\n", dev->busdesc.ResponseRing); + dprintk(1, " .CommandWrite = 0x%x\n", dev->busdesc.CommandWrite); + dprintk(1, " .CommandRead = 0x%x\n", dev->busdesc.CommandRead); + dprintk(1, " .ResponseWrite = 0x%x\n", dev->busdesc.ResponseWrite); + dprintk(1, " .ResponseRead = 0x%x\n", dev->busdesc.ResponseRead); +} + +/* Much of the hardware configuration and PCI registers are configured + * dynamically depending on firmware. We have to cache some initial + * structures then use these to locate other important structures + * from PCI space. + */ +static void saa7164_get_descriptors(struct saa7164_dev *dev) +{ + memcpy(&dev->hwdesc, dev->bmmio, sizeof(tmComResHWDescr_t)); + memcpy(&dev->intfdesc, dev->bmmio + sizeof(tmComResHWDescr_t), + sizeof(tmComResInterfaceDescr_t)); + memcpy(&dev->busdesc, dev->bmmio + dev->intfdesc.BARLocation, + sizeof(tmComResBusDescr_t)); + + if (dev->hwdesc.bLength != sizeof(tmComResHWDescr_t)) { + printk(KERN_ERR "Structure tmComResHWDescr_t is mangled\n"); + printk(KERN_ERR "Need %x got %lu\n", dev->hwdesc.bLength, + sizeof(tmComResHWDescr_t)); + } else + saa7164_dump_hwdesc(dev); + + if (dev->intfdesc.bLength != sizeof(tmComResInterfaceDescr_t)) { + printk(KERN_ERR "struct tmComResInterfaceDescr_t is mangled\n"); + printk(KERN_ERR "Need %x got %lu\n", dev->intfdesc.bLength, + sizeof(tmComResInterfaceDescr_t)); + } else + saa7164_dump_intfdesc(dev); + + saa7164_dump_busdesc(dev); +} + +static int saa7164_pci_quirks(struct saa7164_dev *dev) +{ + return 0; +} + +static int get_resources(struct saa7164_dev *dev) +{ + if (request_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0), dev->name)) { + + if (request_mem_region(pci_resource_start(dev->pci, 2), + pci_resource_len(dev->pci, 2), dev->name)) + return 0; + } + + printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx or 0x%llx\n", + dev->name, + (u64)pci_resource_start(dev->pci, 0), + (u64)pci_resource_start(dev->pci, 2)); + + return -EBUSY; +} + +static int saa7164_dev_setup(struct saa7164_dev *dev) +{ + int i; + + mutex_init(&dev->lock); + atomic_inc(&dev->refcount); + dev->nr = saa7164_devcount++; + + sprintf(dev->name, "saa7164[%d]", dev->nr); + + mutex_lock(&devlist); + list_add_tail(&dev->devlist, &saa7164_devlist); + mutex_unlock(&devlist); + + /* board config */ + dev->board = UNSET; + if (card[dev->nr] < saa7164_bcount) + dev->board = card[dev->nr]; + + for (i = 0; UNSET == dev->board && i < saa7164_idcount; i++) + if (dev->pci->subsystem_vendor == saa7164_subids[i].subvendor && + dev->pci->subsystem_device == + saa7164_subids[i].subdevice) + dev->board = saa7164_subids[i].card; + + if (UNSET == dev->board) { + dev->board = SAA7164_BOARD_UNKNOWN; + saa7164_card_list(dev); + } + + dev->pci_bus = dev->pci->bus->number; + dev->pci_slot = PCI_SLOT(dev->pci->devfn); + + /* I2C Defaults / setup */ + dev->i2c_bus[0].dev = dev; + dev->i2c_bus[0].nr = 0; + dev->i2c_bus[1].dev = dev; + dev->i2c_bus[1].nr = 1; + dev->i2c_bus[2].dev = dev; + dev->i2c_bus[2].nr = 2; + + /* Transport port A Defaults / setup */ + dev->ts1.dev = dev; + dev->ts1.nr = 0; + mutex_init(&dev->ts1.dvb.lock); + INIT_LIST_HEAD(&dev->ts1.dmaqueue.list); + INIT_LIST_HEAD(&dev->ts1.dummy_dmaqueue.list); + mutex_init(&dev->ts1.dmaqueue_lock); + mutex_init(&dev->ts1.dummy_dmaqueue_lock); + + /* Transport port B Defaults / setup */ + dev->ts2.dev = dev; + dev->ts2.nr = 1; + mutex_init(&dev->ts2.dvb.lock); + INIT_LIST_HEAD(&dev->ts2.dmaqueue.list); + INIT_LIST_HEAD(&dev->ts2.dummy_dmaqueue.list); + mutex_init(&dev->ts2.dmaqueue_lock); + mutex_init(&dev->ts2.dummy_dmaqueue_lock); + + if (get_resources(dev) < 0) { + printk(KERN_ERR "CORE %s No more PCIe resources for " + "subsystem: %04x:%04x\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device); + + saa7164_devcount--; + return -ENODEV; + } + + /* PCI/e allocations */ + dev->lmmio = ioremap(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); + + dev->lmmio2 = ioremap(pci_resource_start(dev->pci, 2), + pci_resource_len(dev->pci, 2)); + + printk(KERN_INFO "CORE %s: dev->lmmio = 0x%p\n", dev->name, + dev->lmmio); + + printk(KERN_INFO "CORE %s: dev->lmmio2 = 0x%p\n", dev->name, + dev->lmmio2); + + dev->bmmio = (u8 __iomem *)dev->lmmio; + dev->bmmio2 = (u8 __iomem *)dev->lmmio2; + printk(KERN_INFO "CORE %s: dev->bmmio = 0x%p\n", dev->name, + dev->bmmio); + + printk(KERN_INFO "CORE %s: dev->bmmio2 = 0x%p\n", dev->name, + dev->bmmio2); + + /* TODO: Magic defines used in the windows driver, define these */ + dev->InterruptStatus = (u32 *)(dev->bmmio + 0x183000 + 0xf80); + dev->InterruptAck = (u32 *)(dev->bmmio + 0x183000 + 0xf90); + + printk(KERN_INFO + "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device, saa7164_boards[dev->board].name, + dev->board, card[dev->nr] == dev->board ? + "insmod option" : "autodetected"); + + saa7164_pci_quirks(dev); + + return 0; +} + +static void saa7164_dev_unregister(struct saa7164_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + release_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); + + release_mem_region(pci_resource_start(dev->pci, 2), + pci_resource_len(dev->pci, 2)); + + if (!atomic_dec_and_test(&dev->refcount)) + return; + + iounmap(dev->lmmio); + iounmap(dev->lmmio2); + + return; +} + +static int __devinit saa7164_initdev(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct saa7164_dev *dev; + int err, i; + u32 version; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (NULL == dev) + return -ENOMEM; + + /* pci init */ + dev->pci = pci_dev; + if (pci_enable_device(pci_dev)) { + err = -EIO; + goto fail_free; + } + + if (saa7164_dev_setup(dev) < 0) { + err = -EINVAL; + goto fail_free; + } + + /* print pci info */ + pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev); + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); + printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " + "latency: %d, mmio: 0x%llx\n", dev->name, + pci_name(pci_dev), dev->pci_rev, pci_dev->irq, + dev->pci_lat, + (unsigned long long)pci_resource_start(pci_dev, 0)); + + pci_set_master(pci_dev); + /* TODO */ + if (!pci_dma_supported(pci_dev, 0xffffffff)) { + printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); + err = -EIO; + goto fail_irq; + } + + err = request_irq(pci_dev->irq, saa7164_irq, + IRQF_SHARED | IRQF_DISABLED, dev->name, dev); + if (err < 0) { + printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name, + pci_dev->irq); + err = -EIO; + goto fail_irq; + } + + pci_set_drvdata(pci_dev, dev); + + saa7164_pci_quirks(dev); + + /* Init the internal command list */ + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + dev->cmds[i].seqno = i; + dev->cmds[i].inuse = 0; + mutex_init(&dev->cmds[i].lock); + init_waitqueue_head(&dev->cmds[i].wait); + } + + /* We need a deferred interrupt handler for cmd handling */ + INIT_WORK(&dev->workcmd, saa7164_work_cmdhandler); + + /* Only load the firmware if we know the board */ + if (dev->board != SAA7164_BOARD_UNKNOWN) { + + err = saa7164_downloadfirmware(dev); + if (err < 0) { + printk(KERN_ERR + "Failed to boot firmware, cannot continue\n"); + goto fail_irq; + } + + saa7164_get_descriptors(dev); + saa7164_dumpregs(dev, 0); + saa7164_getcurrentfirmwareversion(dev); + saa7164_getfirmwarestatus(dev); + err = saa7164_bus_setup(dev); + if (err < 0) + printk(KERN_ERR + "Failed to setup the bus, will continue\n"); + saa7164_bus_dump(dev); + + /* Ping the running firmware via the command bus and get the + * firmware version, this checks the bus is running OK. + */ + version = 0; + if (saa7164_api_get_fw_version(dev, &version) == SAA_OK) + dprintk(1, "Bus is operating correctly using " + "version %d.%d.%d.%d (0x%x)\n", + (version & 0x0000fc00) >> 10, + (version & 0x000003e0) >> 5, + (version & 0x0000001f), + (version & 0xffff0000) >> 16, + version); + else + printk(KERN_ERR + "Failed to communicate with the firmware\n"); + + /* Bring up the I2C buses */ + saa7164_i2c_register(&dev->i2c_bus[0]); + saa7164_i2c_register(&dev->i2c_bus[1]); + saa7164_i2c_register(&dev->i2c_bus[2]); + saa7164_gpio_setup(dev); + saa7164_card_setup(dev); + + + /* Parse the dynamic device configuration, find various + * media endpoints (MPEG, WMV, PS, TS) and cache their + * configuration details into the driver, so we can + * reference them later during simething_register() func, + * interrupt handlers, deferred work handlers etc. + */ + saa7164_api_enum_subdevs(dev); + + /* Try a few API commands - just for exercise purposes */ + saa7164_api_test(dev); + + /* Begin to create the video sub-systems and register funcs */ + if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) { + if (saa7164_dvb_register(&dev->ts1) < 0) { + printk(KERN_ERR "%s() Failed to register " + "dvb adapters on porta\n", + __func__); + } + } + + if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) { + if (saa7164_dvb_register(&dev->ts2) < 0) { + printk(KERN_ERR"%s() Failed to register " + "dvb adapters on portb\n", + __func__); + } + } + + } /* != BOARD_UNKNOWN */ + else + printk(KERN_ERR "%s() Unsupported board detected, " + "registering without firmware\n", __func__); + + return 0; + +fail_irq: + saa7164_dev_unregister(dev); +fail_free: + kfree(dev); + return err; +} + +static void saa7164_shutdown(struct saa7164_dev *dev) +{ + dprintk(1, "%s()\n", __func__); +} + +static void __devexit saa7164_finidev(struct pci_dev *pci_dev) +{ + struct saa7164_dev *dev = pci_get_drvdata(pci_dev); + + saa7164_shutdown(dev); + + if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) + saa7164_dvb_unregister(&dev->ts1); + + if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) + saa7164_dvb_unregister(&dev->ts2); + + saa7164_i2c_unregister(&dev->i2c_bus[0]); + saa7164_i2c_unregister(&dev->i2c_bus[1]); + saa7164_i2c_unregister(&dev->i2c_bus[2]); + + pci_disable_device(pci_dev); + + /* unregister stuff */ + free_irq(pci_dev->irq, dev); + pci_set_drvdata(pci_dev, NULL); + + mutex_lock(&devlist); + list_del(&dev->devlist); + mutex_unlock(&devlist); + + saa7164_dev_unregister(dev); + kfree(dev); +} + +static struct pci_device_id saa7164_pci_tbl[] = { + { + /* SAA7164 */ + .vendor = 0x1131, + .device = 0x7164, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + /* --- end of list --- */ + } +}; +MODULE_DEVICE_TABLE(pci, saa7164_pci_tbl); + +static struct pci_driver saa7164_pci_driver = { + .name = "saa7164", + .id_table = saa7164_pci_tbl, + .probe = saa7164_initdev, + .remove = __devexit_p(saa7164_finidev), + /* TODO */ + .suspend = NULL, + .resume = NULL, +}; + +static int saa7164_init(void) +{ + printk(KERN_INFO "saa7164 driver loaded\n"); + return pci_register_driver(&saa7164_pci_driver); +} + +static void saa7164_fini(void) +{ + pci_unregister_driver(&saa7164_pci_driver); +} + +module_init(saa7164_init); +module_exit(saa7164_fini); + diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c new file mode 100644 index 00000000000..f21520f5979 --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-dvb.c @@ -0,0 +1,578 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "saa7164.h" + +#include "tda10048.h" +#include "tda18271.h" +#include "s5h1411.h" + +#define DRIVER_NAME "saa7164" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* addr is in the card struct, get it from there */ +static struct tda10048_config hauppauge_hvr2200_1_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON +}; +static struct tda10048_config hauppauge_hvr2200_2_config = { + .demod_address = 0x12 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON +}; + +static struct tda18271_std_map hauppauge_tda18271_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37 }, +}; + +static struct tda18271_config hauppauge_hvr22x0_tuner_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, +}; + +static struct s5h1411_config hauppauge_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_ON, + .qam_if = S5H1411_IF_4000, + .vsb_if = S5H1411_IF_3250, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static int saa7164_dvb_stop_tsport(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_DVB, "%s() Stopped\n", __func__); + ret = 0; + } + + return ret; +} + +static int saa7164_dvb_acquire_tsport(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_DVB, "%s() Acquired\n", __func__); + ret = 0; + } + + return ret; +} + +static int saa7164_dvb_pause_tsport(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_DVB, "%s() Paused\n", __func__); + ret = 0; + } + + return ret; +} + +/* Firmware is very windows centric, meaning you have to transition + * the part through AVStream / KS Windows stages, forwards or backwards. + * States are: stopped, acquired (h/w), paused, started. + */ +static int saa7164_dvb_stop_streaming(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + ret = saa7164_dvb_pause_tsport(port); + ret = saa7164_dvb_acquire_tsport(port); + ret = saa7164_dvb_stop_tsport(port); + + return ret; +} + +static int saa7164_dvb_cfg_tsport(struct saa7164_tsport *port) +{ + tmHWStreamParameters_t *params = &port->hw_streamingparams; + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct list_head *c, *n; + int i = 0; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + saa7164_writel(port->pitch, params->pitch); + saa7164_writel(port->bufsize, params->pitch * params->numberoflines); + + dprintk(DBGLVL_DVB, " configured:\n"); + dprintk(DBGLVL_DVB, " lmmio 0x%llx\n", (u64)dev->lmmio); + dprintk(DBGLVL_DVB, " bufcounter 0x%x = 0x%x\n", port->bufcounter, + saa7164_readl(port->bufcounter)); + + dprintk(DBGLVL_DVB, " pitch 0x%x = %d\n", port->pitch, + saa7164_readl(port->pitch)); + + dprintk(DBGLVL_DVB, " bufsize 0x%x = %d\n", port->bufsize, + saa7164_readl(port->bufsize)); + + dprintk(DBGLVL_DVB, " buffercount = %d\n", port->hwcfg.buffercount); + dprintk(DBGLVL_DVB, " bufoffset = 0x%x\n", port->bufoffset); + dprintk(DBGLVL_DVB, " bufptr32h = 0x%x\n", port->bufptr32h); + dprintk(DBGLVL_DVB, " bufptr32l = 0x%x\n", port->bufptr32l); + + /* Poke the buffers and offsets into PCI space */ + mutex_lock(&port->dmaqueue_lock); + list_for_each_safe(c, n, &port->dmaqueue.list) { + buf = list_entry(c, struct saa7164_buffer, list); + + /* TODO: Review this in light of 32v64 assignments */ + saa7164_writel(port->bufoffset + (sizeof(u32) * i), 0); + saa7164_writel(port->bufptr32h + ((sizeof(u32) * 2) * i), + buf->pt_dma); + saa7164_writel(port->bufptr32l + ((sizeof(u32) * 2) * i), 0); + + dprintk(DBGLVL_DVB, + " buf[%d] offset 0x%lx (0x%x) " + "buf 0x%lx/%lx (0x%x/%x)\n", + i, + port->bufoffset + (i * sizeof(u32)), + saa7164_readl(port->bufoffset + (sizeof(u32) * i)), + port->bufptr32h + ((sizeof(u32) * 2) * i), + port->bufptr32l + ((sizeof(u32) * 2) * i), + saa7164_readl(port->bufptr32h + ((sizeof(u32) * i) + * 2)), + saa7164_readl(port->bufptr32l + ((sizeof(u32) * i) + * 2))); + + if (i++ > port->hwcfg.buffercount) + BUG(); + + } + mutex_unlock(&port->dmaqueue_lock); + + return 0; +} + +static int saa7164_dvb_start_tsport(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + int ret = 0, result; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + saa7164_dvb_cfg_tsport(port); + + /* Acquire the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + ret = -EIO; + goto out; + } else + dprintk(DBGLVL_DVB, "%s() Acquired\n", __func__); + + /* Pause the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + + ret = -EIO; + goto out; + } else + dprintk(DBGLVL_DVB, "%s() Paused\n", __func__); + + /* Start the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_RUN); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() run transition failed, result = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() run/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + + ret = -EIO; + } else + dprintk(DBGLVL_DVB, "%s() Running\n", __func__); + +out: + return ret; +} + +static int saa7164_dvb_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct saa7164_tsport *port = (struct saa7164_tsport *) demux->priv; + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + int ret = 0; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + if (!demux->dmx.frontend) + return -EINVAL; + + if (dvb) { + mutex_lock(&dvb->lock); + if (dvb->feeding++ == 0) { + /* Start transport */ + ret = saa7164_dvb_start_tsport(port); + } + mutex_unlock(&dvb->lock); + dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n", + __func__, port->nr, dvb->feeding); + } + + return ret; +} + +static int saa7164_dvb_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct saa7164_tsport *port = (struct saa7164_tsport *) demux->priv; + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + int ret = 0; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + if (dvb) { + mutex_lock(&dvb->lock); + if (--dvb->feeding == 0) { + /* Stop transport */ + ret = saa7164_dvb_stop_streaming(port); + } + mutex_unlock(&dvb->lock); + dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n", + __func__, port->nr, dvb->feeding); + } + + return ret; +} + +static int dvb_register(struct saa7164_tsport *port) +{ + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + int result, i; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + /* Sanity check that the PCI configuration space is active */ + if (port->hwcfg.BARLocation == 0) { + result = -ENOMEM; + printk(KERN_ERR "%s: dvb_register_adapter failed " + "(errno = %d), NO PCI configuration\n", + DRIVER_NAME, result); + goto fail_adapter; + } + + /* Init and establish defaults */ + port->hw_streamingparams.bitspersample = 8; + port->hw_streamingparams.samplesperline = 188; + port->hw_streamingparams.numberoflines = + (SAA7164_TS_NUMBER_OF_LINES * 188) / 188; + + port->hw_streamingparams.pitch = 188; + port->hw_streamingparams.linethreshold = 0; + port->hw_streamingparams.pagetablelistvirt = 0; + port->hw_streamingparams.pagetablelistphys = 0; + port->hw_streamingparams.numpagetables = 2 + + ((SAA7164_TS_NUMBER_OF_LINES * 188) / PAGE_SIZE); + + port->hw_streamingparams.numpagetableentries = port->hwcfg.buffercount; + + /* Allocate the PCI resources */ + for (i = 0; i < port->hwcfg.buffercount; i++) { + buf = saa7164_buffer_alloc(port, + port->hw_streamingparams.numberoflines * + port->hw_streamingparams.pitch); + + if (!buf) { + result = -ENOMEM; + printk(KERN_ERR "%s: dvb_register_adapter failed " + "(errno = %d), unable to allocate buffers\n", + DRIVER_NAME, result); + goto fail_adapter; + } + buf->nr = i; + + mutex_lock(&port->dmaqueue_lock); + list_add_tail(&buf->list, &port->dmaqueue.list); + mutex_unlock(&port->dmaqueue_lock); + } + + /* register adapter */ + result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE, + &dev->pci->dev, adapter_nr); + if (result < 0) { + printk(KERN_ERR "%s: dvb_register_adapter failed " + "(errno = %d)\n", DRIVER_NAME, result); + goto fail_adapter; + } + dvb->adapter.priv = port; + + /* register frontend */ + result = dvb_register_frontend(&dvb->adapter, dvb->frontend); + if (result < 0) { + printk(KERN_ERR "%s: dvb_register_frontend failed " + "(errno = %d)\n", DRIVER_NAME, result); + goto fail_frontend; + } + + /* register demux stuff */ + dvb->demux.dmx.capabilities = + DMX_TS_FILTERING | DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING; + dvb->demux.priv = port; + dvb->demux.filternum = 256; + dvb->demux.feednum = 256; + dvb->demux.start_feed = saa7164_dvb_start_feed; + dvb->demux.stop_feed = saa7164_dvb_stop_feed; + result = dvb_dmx_init(&dvb->demux); + if (result < 0) { + printk(KERN_ERR "%s: dvb_dmx_init failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_dmx; + } + + dvb->dmxdev.filternum = 256; + dvb->dmxdev.demux = &dvb->demux.dmx; + dvb->dmxdev.capabilities = 0; + result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); + if (result < 0) { + printk(KERN_ERR "%s: dvb_dmxdev_init failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_dmxdev; + } + + dvb->fe_hw.source = DMX_FRONTEND_0; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + printk(KERN_ERR "%s: add_frontend failed " + "(DMX_FRONTEND_0, errno = %d)\n", DRIVER_NAME, result); + goto fail_fe_hw; + } + + dvb->fe_mem.source = DMX_MEMORY_FE; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); + if (result < 0) { + printk(KERN_ERR "%s: add_frontend failed " + "(DMX_MEMORY_FE, errno = %d)\n", DRIVER_NAME, result); + goto fail_fe_mem; + } + + result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + printk(KERN_ERR "%s: connect_frontend failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_fe_conn; + } + + /* register network adapter */ + dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx); + return 0; + +fail_fe_conn: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); +fail_fe_mem: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); +fail_fe_hw: + dvb_dmxdev_release(&dvb->dmxdev); +fail_dmxdev: + dvb_dmx_release(&dvb->demux); +fail_dmx: + dvb_unregister_frontend(dvb->frontend); +fail_frontend: + dvb_frontend_detach(dvb->frontend); + dvb_unregister_adapter(&dvb->adapter); +fail_adapter: + return result; +} + +int saa7164_dvb_unregister(struct saa7164_tsport *port) +{ + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *b; + struct list_head *c, *n; + + dprintk(DBGLVL_DVB, "%s()\n", __func__); + + /* Remove any allocated buffers */ + mutex_lock(&port->dmaqueue_lock); + list_for_each_safe(c, n, &port->dmaqueue.list) { + b = list_entry(c, struct saa7164_buffer, list); + list_del(c); + saa7164_buffer_dealloc(port, b); + } + mutex_unlock(&port->dmaqueue_lock); + + if (dvb->frontend == NULL) + return 0; + + dvb_net_release(&dvb->net); + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); + dvb_dmxdev_release(&dvb->dmxdev); + dvb_dmx_release(&dvb->demux); + dvb_unregister_frontend(dvb->frontend); + dvb_frontend_detach(dvb->frontend); + dvb_unregister_adapter(&dvb->adapter); + return 0; +} + +/* All the DVB attach calls go here, this function get's modified + * for each new card. + */ +int saa7164_dvb_register(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_i2c *i2c_bus = NULL; + int ret; + + dprintk(DBGLVL_DVB, "%s()\n", __func__); + + /* init frontend */ + switch (dev->board) { + case SAA7164_BOARD_HAUPPAUGE_HVR2200: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + switch (port->nr) { + case 0: + i2c_bus = &dev->i2c_bus[1]; + + port->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr2200_1_config, + &i2c_bus->i2c_adap); + + if (port->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, port->dvb.frontend, + 0xc0 >> 1, &i2c_bus->i2c_adap, + &hauppauge_hvr22x0_tuner_config); + } + + break; + case 1: + i2c_bus = &dev->i2c_bus[2]; + + port->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr2200_2_config, + &i2c_bus->i2c_adap); + + if (port->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, port->dvb.frontend, + 0xc0 >> 1, &i2c_bus->i2c_adap, + &hauppauge_hvr22x0_tuner_config); + } + + break; + } + break; + case SAA7164_BOARD_HAUPPAUGE_HVR2250: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + i2c_bus = &dev->i2c_bus[port->nr + 1]; + + port->dvb.frontend = dvb_attach(s5h1411_attach, + &hauppauge_s5h1411_config, + &i2c_bus->i2c_adap); + + if (port->dvb.frontend != NULL) { + /* TODO: addr is in the card struct */ + dvb_attach(tda18271_attach, port->dvb.frontend, + 0xc0 >> 1, &i2c_bus->i2c_adap, + &hauppauge_hvr22x0_tuner_config); + } + + break; + default: + printk(KERN_ERR "%s: The frontend isn't supported\n", + dev->name); + break; + } + if (NULL == dvb->frontend) { + printk(KERN_ERR "%s() Frontend initialization failed\n", + __func__); + return -1; + } + + /* Put the analog decoder in standby to keep it quiet */ + + /* register everything */ + ret = dvb_register(port); + if (ret < 0) { + if (dvb->frontend->ops.release) + dvb->frontend->ops.release(dvb->frontend); + return ret; + } + + return 0; +} + diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/video/saa7164/saa7164-fw.c new file mode 100644 index 00000000000..6595dd67c5c --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-fw.c @@ -0,0 +1,615 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include "saa7164.h" + +#define SAA7164_REV2_FIRMWARE "v4l-saa7164-1.0.2.fw" +#define SAA7164_REV2_FIRMWARE_SIZE 3978608 + +#define SAA7164_REV3_FIRMWARE "v4l-saa7164-1.0.3.fw" +#define SAA7164_REV3_FIRMWARE_SIZE 3978608 + +struct fw_header { + u32 firmwaresize; + u32 bslsize; + u32 reserved; + u32 version; +}; + +int saa7164_dl_wait_ack(struct saa7164_dev *dev, u32 reg) +{ + u32 timeout = SAA_DEVICE_TIMEOUT; + while ((saa7164_readl(reg) & 0x01) == 0) { + timeout -= 5; + if (timeout == 0) { + printk(KERN_ERR "%s() timeout (no d/l ack)\n", + __func__); + return -EBUSY; + } + /* TODO: Review this for efficiency, f/w load is slow */ + msleep(1); + } + + return 0; +} + +int saa7164_dl_wait_clr(struct saa7164_dev *dev, u32 reg) +{ + u32 timeout = SAA_DEVICE_TIMEOUT; + while (saa7164_readl(reg) & 0x01) { + timeout -= 5; + if (timeout == 0) { + printk(KERN_ERR "%s() timeout (no d/l clr)\n", + __func__); + return -EBUSY; + } + /* TODO: Review this for efficiency, f/w load is slow */ + msleep(1); + } + + return 0; +} + +/* TODO: move dlflags into dev-> and change to write/readl/b */ +/* TODO: Excessive levels of debug */ +int saa7164_downloadimage(struct saa7164_dev *dev, u8 *src, u32 srcsize, + u32 dlflags, u8 *dst, u32 dstsize) +{ + u32 reg, timeout, offset; + u8 *srcbuf = NULL; + int ret; + + u32 dlflag = dlflags; + u32 dlflag_ack = dlflag + 4; + u32 drflag = dlflag_ack + 4; + u32 drflag_ack = drflag + 4; + u32 bleflag = drflag_ack + 4; + + dprintk(DBGLVL_FW, + "%s(image=%p, size=%d, flags=0x%x, dst=%p, dstsize=0x%x)\n", + __func__, src, srcsize, dlflags, dst, dstsize); + + if ((src == 0) || (dst == 0)) { + ret = -EIO; + goto out; + } + + srcbuf = kzalloc(4 * 1048576, GFP_KERNEL); + if (NULL == srcbuf) { + ret = -ENOMEM; + goto out; + } + + if (srcsize > (4*1048576)) { + ret = -ENOMEM; + goto out; + } + + memcpy(srcbuf, src, srcsize); + + dprintk(DBGLVL_FW, "%s() dlflag = 0x%x\n", __func__, dlflag); + dprintk(DBGLVL_FW, "%s() dlflag_ack = 0x%x\n", __func__, dlflag_ack); + dprintk(DBGLVL_FW, "%s() drflag = 0x%x\n", __func__, drflag); + dprintk(DBGLVL_FW, "%s() drflag_ack = 0x%x\n", __func__, drflag_ack); + dprintk(DBGLVL_FW, "%s() bleflag = 0x%x\n", __func__, bleflag); + + reg = saa7164_readl(dlflag); + dprintk(DBGLVL_FW, "%s() dlflag (0x%x)= 0x%x\n", __func__, dlflag, reg); + if (reg == 1) + dprintk(DBGLVL_FW, + "%s() Download flag already set, please reboot\n", + __func__); + + /* Indicate download start */ + saa7164_writel(dlflag, 1); + ret = saa7164_dl_wait_ack(dev, dlflag_ack); + if (ret < 0) + goto out; + + /* Ack download start, then wait for wait */ + saa7164_writel(dlflag, 0); + ret = saa7164_dl_wait_clr(dev, dlflag_ack); + if (ret < 0) + goto out; + + /* Deal with the raw firmware, in the appropriate chunk size */ + for (offset = 0; srcsize > dstsize; + srcsize -= dstsize, offset += dstsize) { + + dprintk(DBGLVL_FW, "%s() memcpy %d\n", __func__, dstsize); + memcpy(dst, srcbuf + offset, dstsize); + + /* Flag the data as ready */ + saa7164_writel(drflag, 1); + ret = saa7164_dl_wait_ack(dev, drflag_ack); + if (ret < 0) + goto out; + + /* Wait for indication data was received */ + saa7164_writel(drflag, 0); + ret = saa7164_dl_wait_clr(dev, drflag_ack); + if (ret < 0) + goto out; + + } + + dprintk(DBGLVL_FW, "%s() memcpy(l) %d\n", __func__, dstsize); + /* Write last block to the device */ + memcpy(dst, srcbuf+offset, srcsize); + + /* Flag the data as ready */ + saa7164_writel(drflag, 1); + ret = saa7164_dl_wait_ack(dev, drflag_ack); + if (ret < 0) + goto out; + + saa7164_writel(drflag, 0); + timeout = 0; + while (saa7164_readl(bleflag) != SAA_DEVICE_IMAGE_BOOTING) { + if (saa7164_readl(bleflag) & SAA_DEVICE_IMAGE_CORRUPT) { + printk(KERN_ERR "%s() image corrupt\n", __func__); + ret = -EBUSY; + goto out; + } + + if (saa7164_readl(bleflag) & SAA_DEVICE_MEMORY_CORRUPT) { + printk(KERN_ERR "%s() device memory corrupt\n", + __func__); + ret = -EBUSY; + goto out; + } + + msleep(10); + if (timeout++ > 60) + break; + } + + printk(KERN_INFO "%s() Image downloaded, booting...\n", __func__); + + ret = saa7164_dl_wait_clr(dev, drflag_ack); + if (ret < 0) + goto out; + + printk(KERN_INFO "%s() Image booted successfully.\n", __func__); + ret = 0; + +out: + kfree(srcbuf); + return ret; +} + +/* TODO: Excessive debug */ +/* Load the firmware. Optionally it can be in ROM or newer versions + * can be on disk, saving the expense of the ROM hardware. */ +int saa7164_downloadfirmware(struct saa7164_dev *dev) +{ + /* u32 second_timeout = 60 * SAA_DEVICE_TIMEOUT; */ + u32 tmp, filesize, version, err_flags, first_timeout, fwlength; + u32 second_timeout, updatebootloader = 1, bootloadersize = 0; + const struct firmware *fw = NULL; + struct fw_header *hdr, *boothdr = NULL, *fwhdr; + u32 bootloaderversion = 0, fwloadersize; + u8 *bootloaderoffset = NULL, *fwloaderoffset; + char *fwname; + int ret; + + dprintk(DBGLVL_FW, "%s()\n", __func__); + + if (saa7164_boards[dev->board].chiprev == SAA7164_CHIP_REV2) { + fwname = SAA7164_REV2_FIRMWARE; + fwlength = SAA7164_REV2_FIRMWARE_SIZE; + } else { + fwname = SAA7164_REV3_FIRMWARE; + fwlength = SAA7164_REV3_FIRMWARE_SIZE; + } + + version = saa7164_getcurrentfirmwareversion(dev); + + if (version == 0x00) { + + second_timeout = 100; + first_timeout = 100; + err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS); + dprintk(DBGLVL_FW, "%s() err_flags = %x\n", + __func__, err_flags); + + while (err_flags != SAA_DEVICE_IMAGE_BOOTING) { + dprintk(DBGLVL_FW, "%s() err_flags = %x\n", + __func__, err_flags); + msleep(10); + + if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) { + printk(KERN_ERR "%s() firmware corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) { + printk(KERN_ERR "%s() device memory corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_NO_IMAGE) { + printk(KERN_ERR "%s() no first image\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) { + first_timeout -= 10; + if (first_timeout == 0) { + printk(KERN_ERR + "%s() no first image\n", + __func__); + break; + } + } else if (err_flags & SAA_DEVICE_IMAGE_LOADING) { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() FW load time exceeded\n", + __func__); + break; + } + } else { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() Unknown bootloader flags 0x%x\n", + __func__, err_flags); + break; + } + } + + err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS); + } /* While != Booting */ + + if (err_flags == SAA_DEVICE_IMAGE_BOOTING) { + dprintk(DBGLVL_FW, "%s() Loader 1 has loaded.\n", + __func__); + first_timeout = SAA_DEVICE_TIMEOUT; + second_timeout = 60 * SAA_DEVICE_TIMEOUT; + second_timeout = 100; + + err_flags = saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS); + dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n", + __func__, err_flags); + while (err_flags != SAA_DEVICE_IMAGE_BOOTING) { + dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n", + __func__, err_flags); + msleep(10); + + if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) { + printk(KERN_ERR + "%s() firmware corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) { + printk(KERN_ERR + "%s() device memory corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_NO_IMAGE) { + printk(KERN_ERR "%s() no first image\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) { + first_timeout -= 10; + if (first_timeout == 0) { + printk(KERN_ERR + "%s() no second image\n", + __func__); + break; + } + } else if (err_flags & + SAA_DEVICE_IMAGE_LOADING) { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() FW load time exceeded\n", + __func__); + break; + } + } else { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() Unknown bootloader flags 0x%x\n", + __func__, err_flags); + break; + } + } + + err_flags = + saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS); + } /* err_flags != SAA_DEVICE_IMAGE_BOOTING */ + + dprintk(DBGLVL_FW, "%s() Loader flags 1:0x%x 2:0x%x.\n", + __func__, + saa7164_readl(SAA_BOOTLOADERERROR_FLAGS), + saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS)); + + } /* err_flags == SAA_DEVICE_IMAGE_BOOTING */ + + /* It's possible for both firmwares to have booted, + * but that doesn't mean they've finished booting yet. + */ + if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING) && + (saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING)) { + + + dprintk(DBGLVL_FW, "%s() Loader 2 has loaded.\n", + __func__); + + first_timeout = SAA_DEVICE_TIMEOUT; + while (first_timeout) { + msleep(10); + + version = + saa7164_getcurrentfirmwareversion(dev); + if (version) { + dprintk(DBGLVL_FW, + "%s() All f/w loaded successfully\n", + __func__); + break; + } else { + first_timeout -= 10; + if (first_timeout == 0) { + printk(KERN_ERR + "%s() FW did not boot\n", + __func__); + break; + } + } + } + } + version = saa7164_getcurrentfirmwareversion(dev); + } /* version == 0 */ + + /* Has the firmware really booted? */ + if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING) && + (saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING) && (version == 0)) { + + printk(KERN_ERR + "%s() The firmware hung, probably bad firmware\n", + __func__); + + /* Tell the second stage loader we have a deadlock */ + saa7164_writel(SAA_DEVICE_DEADLOCK_DETECTED_OFFSET, + SAA_DEVICE_DEADLOCK_DETECTED); + + saa7164_getfirmwarestatus(dev); + + return -ENOMEM; + } + + dprintk(DBGLVL_FW, "Device has Firmware Version %d.%d.%d.%d\n", + (version & 0x0000fc00) >> 10, + (version & 0x000003e0) >> 5, + (version & 0x0000001f), + (version & 0xffff0000) >> 16); + + /* Load the firmwware from the disk if required */ + if (version == 0) { + + printk(KERN_INFO "%s() Waiting for firmware upload (%s)\n", + __func__, fwname); + + ret = request_firmware(&fw, fwname, &dev->pci->dev); + if (ret) { + printk(KERN_ERR "%s() Upload failed. " + "(file not found?)\n", __func__); + return -ENOMEM; + } + + printk(KERN_INFO "%s() firmware read %Zu bytes.\n", + __func__, fw->size); + + if (fw->size != fwlength) { + printk(KERN_ERR "xc5000: firmware incorrect size\n"); + ret = -ENOMEM; + goto out; + } + + printk(KERN_INFO "%s() firmware loaded.\n", __func__); + + hdr = (struct fw_header *)fw->data; + printk(KERN_INFO "Firmware file header part 1:\n"); + printk(KERN_INFO " .FirmwareSize = 0x%x\n", hdr->firmwaresize); + printk(KERN_INFO " .BSLSize = 0x%x\n", hdr->bslsize); + printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved); + printk(KERN_INFO " .Version = 0x%x\n", hdr->version); + + /* Retreive bootloader if reqd */ + if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) + /* Second bootloader in the firmware file */ + filesize = hdr->reserved * 16; + else + filesize = (hdr->firmwaresize + hdr->bslsize) * + 16 + sizeof(struct fw_header); + + printk(KERN_INFO "%s() SecBootLoader.FileSize = %d\n", + __func__, filesize); + + /* Get bootloader (if reqd) and firmware header */ + if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) { + /* Second boot loader is required */ + + /* Get the loader header */ + boothdr = (struct fw_header *)(fw->data + + sizeof(struct fw_header)); + + bootloaderversion = + saa7164_readl(SAA_DEVICE_2ND_VERSION); + dprintk(DBGLVL_FW, "Onboard BootLoader:\n"); + dprintk(DBGLVL_FW, "->Flag 0x%x\n", + saa7164_readl(SAA_BOOTLOADERERROR_FLAGS)); + dprintk(DBGLVL_FW, "->Ack 0x%x\n", + saa7164_readl(SAA_DATAREADY_FLAG_ACK)); + dprintk(DBGLVL_FW, "->FW Version 0x%x\n", version); + dprintk(DBGLVL_FW, "->Loader Version 0x%x\n", + bootloaderversion); + + if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) == + 0x03) && (saa7164_readl(SAA_DATAREADY_FLAG_ACK) + == 0x00) && (version == 0x00)) { + + dprintk(DBGLVL_FW, "BootLoader version in " + "rom %d.%d.%d.%d\n", + (bootloaderversion & 0x0000fc00) >> 10, + (bootloaderversion & 0x000003e0) >> 5, + (bootloaderversion & 0x0000001f), + (bootloaderversion & 0xffff0000) >> 16 + ); + dprintk(DBGLVL_FW, "BootLoader version " + "in file %d.%d.%d.%d\n", + (boothdr->version & 0x0000fc00) >> 10, + (boothdr->version & 0x000003e0) >> 5, + (boothdr->version & 0x0000001f), + (boothdr->version & 0xffff0000) >> 16 + ); + + if (bootloaderversion == boothdr->version) + updatebootloader = 0; + } + + /* Calculate offset to firmware header */ + tmp = (boothdr->firmwaresize + boothdr->bslsize) * 16 + + (sizeof(struct fw_header) + + sizeof(struct fw_header)); + + fwhdr = (struct fw_header *)(fw->data+tmp); + } else { + /* No second boot loader */ + fwhdr = hdr; + } + + dprintk(DBGLVL_FW, "Firmware version in file %d.%d.%d.%d\n", + (fwhdr->version & 0x0000fc00) >> 10, + (fwhdr->version & 0x000003e0) >> 5, + (fwhdr->version & 0x0000001f), + (fwhdr->version & 0xffff0000) >> 16 + ); + + if (version == fwhdr->version) { + /* No download, firmware already on board */ + ret = 0; + goto out; + } + + if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) { + if (updatebootloader) { + /* Get ready to upload the bootloader */ + bootloadersize = (boothdr->firmwaresize + + boothdr->bslsize) * 16 + + sizeof(struct fw_header); + + bootloaderoffset = (u8 *)(fw->data + + sizeof(struct fw_header)); + + dprintk(DBGLVL_FW, "bootloader d/l starts.\n"); + printk(KERN_INFO "%s() FirmwareSize = 0x%x\n", + __func__, boothdr->firmwaresize); + printk(KERN_INFO "%s() BSLSize = 0x%x\n", + __func__, boothdr->bslsize); + printk(KERN_INFO "%s() Reserved = 0x%x\n", + __func__, boothdr->reserved); + printk(KERN_INFO "%s() Version = 0x%x\n", + __func__, boothdr->version); + ret = saa7164_downloadimage( + dev, + bootloaderoffset, + bootloadersize, + SAA_DOWNLOAD_FLAGS, + dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET, + SAA_DEVICE_BUFFERBLOCKSIZE); + if (ret < 0) { + printk(KERN_ERR + "bootloader d/l has failed\n"); + goto out; + } + dprintk(DBGLVL_FW, + "bootloader download complete.\n"); + + } + + printk(KERN_ERR "starting firmware download(2)\n"); + bootloadersize = (boothdr->firmwaresize + + boothdr->bslsize) * 16 + + sizeof(struct fw_header); + + bootloaderoffset = + (u8 *)(fw->data + sizeof(struct fw_header)); + + fwloaderoffset = bootloaderoffset + bootloadersize; + + /* TODO: fix this bounds overrun here with old f/ws */ + fwloadersize = (fwhdr->firmwaresize + fwhdr->bslsize) * + 16 + sizeof(struct fw_header); + + ret = saa7164_downloadimage( + dev, + fwloaderoffset, + fwloadersize, + SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET, + dev->bmmio + SAA_DEVICE_2ND_DOWNLOAD_OFFSET, + SAA_DEVICE_2ND_BUFFERBLOCKSIZE); + if (ret < 0) { + printk(KERN_ERR "firmware download failed\n"); + goto out; + } + printk(KERN_ERR "firmware download complete.\n"); + + } else { + + /* No bootloader update reqd, download firmware only */ + printk(KERN_ERR "starting firmware download(3)\n"); + + ret = saa7164_downloadimage( + dev, + (u8 *)fw->data, + fw->size, + SAA_DOWNLOAD_FLAGS, + dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET, + SAA_DEVICE_BUFFERBLOCKSIZE); + if (ret < 0) { + printk(KERN_ERR "firmware download failed\n"); + goto out; + } + printk(KERN_ERR "firmware download complete.\n"); + } + } + + ret = 0; + +out: + if (fw) + release_firmware(fw); + + return ret; +} diff --git a/drivers/media/video/saa7164/saa7164-i2c.c b/drivers/media/video/saa7164/saa7164-i2c.c new file mode 100644 index 00000000000..4c431b4ac8d --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-i2c.c @@ -0,0 +1,170 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "saa7164.h" + +static int i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) +{ + struct saa7164_i2c *bus = i2c_adap->algo_data; + struct saa7164_dev *dev = bus->dev; + int i, retval = 0; + + dprintk(DBGLVL_I2C, "%s(num = %d)\n", __func__, num); + + for (i = 0 ; i < num; i++) { + dprintk(DBGLVL_I2C, "%s(num = %d) addr = 0x%02x len = 0x%x\n", + __func__, num, msgs[i].addr, msgs[i].len); + if (msgs[i].flags & I2C_M_RD) { + /* Unsupported - Yet*/ + printk(KERN_ERR "%s() Unsupported - Yet\n", __func__); + continue; + } else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + /* write then read from same address */ + + retval = saa7164_api_i2c_read(bus, msgs[i].addr, + msgs[i].len, msgs[i].buf, + msgs[i+1].len, msgs[i+1].buf + ); + + i++; + + if (retval < 0) + goto err; + } else { + /* write */ + retval = saa7164_api_i2c_write(bus, msgs[i].addr, + msgs[i].len, msgs[i].buf); + } + if (retval < 0) + goto err; + } + return num; + + err: + return retval; +} + +static int attach_inform(struct i2c_client *client) +{ + struct saa7164_i2c *bus = i2c_get_adapdata(client->adapter); + struct saa7164_dev *dev = bus->dev; + + dprintk(DBGLVL_I2C, "%s i2c attach [addr=0x%x,client=%s]\n", + client->driver->driver.name, client->addr, client->name); + + if (!client->driver->command) + return 0; + + return 0; +} + +static int detach_inform(struct i2c_client *client) +{ + struct saa7164_dev *dev = i2c_get_adapdata(client->adapter); + + dprintk(DBGLVL_I2C, "i2c detach [client=%s]\n", client->name); + + return 0; +} + +void saa7164_call_i2c_clients(struct saa7164_i2c *bus, unsigned int cmd, + void *arg) +{ + if (bus->i2c_rc != 0) + return; + + i2c_clients_command(&bus->i2c_adap, cmd, arg); +} + +static u32 saa7164_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm saa7164_i2c_algo_template = { + .master_xfer = i2c_xfer, + .functionality = saa7164_functionality, +}; + +/* ----------------------------------------------------------------------- */ + +static struct i2c_adapter saa7164_i2c_adap_template = { + .name = "saa7164", + .owner = THIS_MODULE, + .id = I2C_HW_B_SAA7164, + .algo = &saa7164_i2c_algo_template, + .client_register = attach_inform, + .client_unregister = detach_inform, +}; + +static struct i2c_client saa7164_i2c_client_template = { + .name = "saa7164 internal", +}; + +int saa7164_i2c_register(struct saa7164_i2c *bus) +{ + struct saa7164_dev *dev = bus->dev; + + dprintk(DBGLVL_I2C, "%s(bus = %d)\n", __func__, bus->nr); + + memcpy(&bus->i2c_adap, &saa7164_i2c_adap_template, + sizeof(bus->i2c_adap)); + + memcpy(&bus->i2c_algo, &saa7164_i2c_algo_template, + sizeof(bus->i2c_algo)); + + memcpy(&bus->i2c_client, &saa7164_i2c_client_template, + sizeof(bus->i2c_client)); + + bus->i2c_adap.dev.parent = &dev->pci->dev; + + strlcpy(bus->i2c_adap.name, bus->dev->name, + sizeof(bus->i2c_adap.name)); + + bus->i2c_algo.data = bus; + bus->i2c_adap.algo_data = bus; + i2c_set_adapdata(&bus->i2c_adap, bus); + i2c_add_adapter(&bus->i2c_adap); + + bus->i2c_client.adapter = &bus->i2c_adap; + + if (0 == bus->i2c_rc) { + printk(KERN_ERR "%s: i2c bus %d registered\n", + dev->name, bus->nr); + } else + printk(KERN_ERR "%s: i2c bus %d register FAILED\n", + dev->name, bus->nr); + + return bus->i2c_rc; +} + +int saa7164_i2c_unregister(struct saa7164_i2c *bus) +{ + i2c_del_adapter(&bus->i2c_adap); + return 0; +} diff --git a/drivers/media/video/saa7164/saa7164-reg.h b/drivers/media/video/saa7164/saa7164-reg.h new file mode 100644 index 00000000000..06be4c13d5b --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-reg.h @@ -0,0 +1,166 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* TODO: Retest the driver with errors expressed as negatives */ + +/* Result codes */ +#define SAA_OK 0 +#define SAA_ERR_BAD_PARAMETER 0x09 +#define SAA_ERR_NO_RESOURCES 0x0c +#define SAA_ERR_NOT_SUPPORTED 0x13 +#define SAA_ERR_BUSY 0x15 +#define SAA_ERR_READ 0x17 +#define SAA_ERR_TIMEOUT 0x1f +#define SAA_ERR_OVERFLOW 0x20 +#define SAA_ERR_EMPTY 0x22 +#define SAA_ERR_NOT_STARTED 0x23 +#define SAA_ERR_ALREADY_STARTED 0x24 +#define SAA_ERR_NOT_STOPPED 0x25 +#define SAA_ERR_ALREADY_STOPPED 0x26 +#define SAA_ERR_INVALID_COMMAND 0x3e +#define SAA_ERR_NULL_PACKET 0x59 + +/* Errors and flags from the silicon */ +#define PVC_ERRORCODE_UNKNOWN 0x00 +#define PVC_ERRORCODE_INVALID_COMMAND 0x01 +#define PVC_ERRORCODE_INVALID_CONTROL 0x02 +#define PVC_ERRORCODE_INVALID_DATA 0x03 +#define PVC_ERRORCODE_TIMEOUT 0x04 +#define PVC_ERRORCODE_NAK 0x05 +#define PVC_RESPONSEFLAG_ERROR 0x01 +#define PVC_RESPONSEFLAG_OVERFLOW 0x02 +#define PVC_RESPONSEFLAG_RESET 0x04 +#define PVC_RESPONSEFLAG_INTERFACE 0x08 +#define PVC_RESPONSEFLAG_CONTINUED 0x10 +#define PVC_CMDFLAG_INTERRUPT 0x02 +#define PVC_CMDFLAG_INTERFACE 0x04 +#define PVC_CMDFLAG_SERIALIZE 0x08 +#define PVC_CMDFLAG_CONTINUE 0x10 + +/* Silicon Commands */ +#define GET_DESCRIPTORS_CONTROL 0x01 +#define GET_STRING_CONTROL 0x03 +#define GET_LANGUAGE_CONTROL 0x05 +#define SET_POWER_CONTROL 0x07 +#define GET_FW_VERSION_CONTROL 0x09 +#define SET_DEBUG_LEVEL_CONTROL 0x0B +#define GET_DEBUG_DATA_CONTROL 0x0C +#define GET_PRODUCTION_INFO_CONTROL 0x0D + +/* cmd defines */ +#define SAA_CMDFLAG_CONTINUE 0x10 +#define SAA_CMD_MAX_MSG_UNITS 256 + +/* Some defines */ +#define SAA_BUS_TIMEOUT 50 +#define SAA_DEVICE_TIMEOUT 5000 +#define SAA_DEVICE_MAXREQUESTSIZE 256 + +/* Register addresses */ +#define SAA_DEVICE_VERSION 0x30 +#define SAA_DOWNLOAD_FLAGS 0x34 +#define SAA_DOWNLOAD_FLAG 0x34 +#define SAA_DOWNLOAD_FLAG_ACK 0x38 +#define SAA_DATAREADY_FLAG 0x3C +#define SAA_DATAREADY_FLAG_ACK 0x40 + +/* Boot loader register and bit definitions */ +#define SAA_BOOTLOADERERROR_FLAGS 0x44 +#define SAA_DEVICE_IMAGE_SEARCHING 0x01 +#define SAA_DEVICE_IMAGE_LOADING 0x02 +#define SAA_DEVICE_IMAGE_BOOTING 0x03 +#define SAA_DEVICE_IMAGE_CORRUPT 0x04 +#define SAA_DEVICE_MEMORY_CORRUPT 0x08 +#define SAA_DEVICE_NO_IMAGE 0x10 + +/* Register addresses */ +#define SAA_DEVICE_2ND_VERSION 0x50 +#define SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET 0x54 + +/* Register addresses */ +#define SAA_SECONDSTAGEERROR_FLAGS 0x64 + +/* Bootloader regs and flags */ +#define SAA_DEVICE_DEADLOCK_DETECTED_OFFSET 0x6C +#define SAA_DEVICE_DEADLOCK_DETECTED 0xDEADDEAD + +/* Basic firmware status registers */ +#define SAA_DEVICE_SYSINIT_STATUS_OFFSET 0x70 +#define SAA_DEVICE_SYSINIT_STATUS 0x70 +#define SAA_DEVICE_SYSINIT_MODE 0x74 +#define SAA_DEVICE_SYSINIT_SPEC 0x78 +#define SAA_DEVICE_SYSINIT_INST 0x7C +#define SAA_DEVICE_SYSINIT_CPULOAD 0x80 +#define SAA_DEVICE_SYSINIT_REMAINHEAP 0x84 + +#define SAA_DEVICE_DOWNLOAD_OFFSET 0x1000 +#define SAA_DEVICE_BUFFERBLOCKSIZE 0x1000 + +#define SAA_DEVICE_2ND_BUFFERBLOCKSIZE 0x100000 +#define SAA_DEVICE_2ND_DOWNLOAD_OFFSET 0x200000 + +/* Descriptors */ +#define CS_INTERFACE 0x24 + +/* Descriptor subtypes */ +#define VC_INPUT_TERMINAL 0x02 +#define VC_OUTPUT_TERMINAL 0x03 +#define VC_SELECTOR_UNIT 0x04 +#define VC_PROCESSING_UNIT 0x05 +#define FEATURE_UNIT 0x06 +#define TUNER_UNIT 0x09 +#define ENCODER_UNIT 0x0A +#define EXTENSION_UNIT 0x0B +#define VC_TUNER_PATH 0xF0 +#define PVC_HARDWARE_DESCRIPTOR 0xF1 +#define PVC_INTERFACE_DESCRIPTOR 0xF2 +#define PVC_INFRARED_UNIT 0xF3 +#define DRM_UNIT 0xF4 +#define GENERAL_REQUEST 0xF5 + +/* Format Types */ +#define VS_FORMAT_TYPE 0x02 +#define VS_FORMAT_TYPE_I 0x01 +#define VS_FORMAT_UNCOMPRESSED 0x04 +#define VS_FRAME_UNCOMPRESSED 0x05 +#define VS_FORMAT_MPEG2PS 0x09 +#define VS_FORMAT_MPEG2TS 0x0A +#define VS_FORMAT_MPEG4SL 0x0B +#define VS_FORMAT_WM9 0x0C +#define VS_FORMAT_DIVX 0x0D +#define VS_FORMAT_VBI 0x0E +#define VS_FORMAT_RDS 0x0F + +/* Device extension commands */ +#define EXU_REGISTER_ACCESS_CONTROL 0x00 +#define EXU_GPIO_CONTROL 0x01 +#define EXU_GPIO_GROUP_CONTROL 0x02 +#define EXU_INTERRUPT_CONTROL 0x03 + +/* State Transition and args */ +#define SAA_STATE_CONTROL 0x03 +#define SAA_DMASTATE_STOP 0x00 +#define SAA_DMASTATE_ACQUIRE 0x01 +#define SAA_DMASTATE_PAUSE 0x02 +#define SAA_DMASTATE_RUN 0x03 + +/* Hardware registers */ + diff --git a/drivers/media/video/saa7164/saa7164-types.h b/drivers/media/video/saa7164/saa7164-types.h new file mode 100644 index 00000000000..99093f23aae --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-types.h @@ -0,0 +1,287 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* TODO: Cleanup and shorten the namespace */ + +/* Some structues are passed directly to/from the firmware and + * have strict alignment requirements. This is one of them. + */ +typedef struct { + u8 bLength; + u8 bDescriptorType; + u8 bDescriptorSubtype; + u16 bcdSpecVersion; + u32 dwClockFrequency; + u32 dwClockUpdateRes; + u8 bCapabilities; + u32 dwDeviceRegistersLocation; + u32 dwHostMemoryRegion; + u32 dwHostMemoryRegionSize; + u32 dwHostHibernatMemRegion; + u32 dwHostHibernatMemRegionSize; +} __attribute__((packed)) tmComResHWDescr_t; + +/* This is DWORD aligned on windows but I can't find the right + * gcc syntax to match the binary data from the device. + * I've manually padded with Reserved[3] bytes to match the hardware, + * but this could break if GCC decies to pack in a different way. + */ +typedef struct { + u8 bLength; + u8 bDescriptorType; + u8 bDescriptorSubtype; + u8 bFlags; + u8 bInterfaceType; + u8 bInterfaceId; + u8 bBaseInterface; + u8 bInterruptId; + u8 bDebugInterruptId; + u8 BARLocation; + u8 Reserved[3]; +} tmComResInterfaceDescr_t; + +typedef struct { + u64 CommandRing; + u64 ResponseRing; + u32 CommandWrite; + u32 CommandRead; + u32 ResponseWrite; + u32 ResponseRead; +} tmComResBusDescr_t; + +typedef enum { + NONE = 0, + TYPE_BUS_PCI = 1, + TYPE_BUS_PCIe = 2, + TYPE_BUS_USB = 3, + TYPE_BUS_I2C = 4 +} tmBusType_t; + +typedef struct { + tmBusType_t Type; + u16 m_wMaxReqSize; + u8 *m_pdwSetRing; + u32 m_dwSizeSetRing; + u8 *m_pdwGetRing; + u32 m_dwSizeGetRing; + u32 *m_pdwSetWritePos; + u32 *m_pdwSetReadPos; + u32 *m_pdwGetWritePos; + u32 *m_pdwGetReadPos; + + /* All access is protected */ + struct mutex lock; + +} tmComResBusInfo_t; + +typedef struct { + u8 id; + u8 flags; + u16 size; + u32 command; + u16 controlselector; + u8 seqno; +} __attribute__((packed)) tmComResInfo_t; + +typedef enum { + SET_CUR = 0x01, + GET_CUR = 0x81, + GET_MIN = 0x82, + GET_MAX = 0x83, + GET_RES = 0x84, + GET_LEN = 0x85, + GET_INFO = 0x86, + GET_DEF = 0x87 +} tmComResCmd_t; + +struct cmd { + u8 seqno; + u32 inuse; + u32 timeout; + u32 signalled; + struct mutex lock; + wait_queue_head_t wait; +}; + +typedef struct { + u32 pathid; + u32 size; + void *descriptor; +} tmDescriptor_t; + +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 unitid; +} __attribute__((packed)) tmComResDescrHeader_t; + +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 unitid; + u32 devicetype; + u16 deviceid; + u32 numgpiopins; + u8 numgpiogroups; + u8 controlsize; +} __attribute__((packed)) tmComResExtDevDescrHeader_t; + +typedef struct { + u32 pin; + u8 state; +} __attribute__((packed)) tmComResGPIO_t; + +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 pathid; +} __attribute__((packed)) tmComResPathDescrHeader_t; + +/* terminaltype */ +typedef enum { + ITT_ANTENNA = 0x0203, + LINE_CONNECTOR = 0x0603, + SPDIF_CONNECTOR = 0x0605, + COMPOSITE_CONNECTOR = 0x0401, + SVIDEO_CONNECTOR = 0x0402, + COMPONENT_CONNECTOR = 0x0403, + STANDARD_DMA = 0xF101 +} tmComResTermType_t; + +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 terminalid; + u16 terminaltype; + u8 assocterminal; + u8 iterminal; + u8 controlsize; +} __attribute__((packed)) tmComResAntTermDescrHeader_t; + +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 unitid; + u8 sourceid; + u8 iunit; + u32 tuningstandards; + u8 controlsize; + u32 controls; +} __attribute__((packed)) tmComResTunerDescrHeader_t; + +typedef enum { + /* the buffer does not contain any valid data */ + TM_BUFFER_FLAG_EMPTY, + + /* the buffer is filled with valid data */ + TM_BUFFER_FLAG_DONE, + + /* the buffer is the dummy buffer - TODO??? */ + TM_BUFFER_FLAG_DUMMY_BUFFER +} tmBufferFlag_t; + +typedef struct { + u64 *pagetablevirt; + u64 pagetablephys; + u16 offset; + u8 *context; + u64 timestamp; + tmBufferFlag_t BufferFlag_t; + u32 lostbuffers; + u32 validbuffers; + u64 *dummypagevirt; + u64 dummypagephys; + u64 *addressvirt; +} tmBuffer_t; + +typedef struct { + u32 bitspersample; + u32 samplesperline; + u32 numberoflines; + u32 pitch; + u32 linethreshold; + u64 **pagetablelistvirt; + u64 *pagetablelistphys; + u32 numpagetables; + u32 numpagetableentries; +} tmHWStreamParameters_t; + +typedef struct { + tmHWStreamParameters_t HWStreamParameters_t; + u64 qwDummyPageTablePhys; + u64 *pDummyPageTableVirt; +} tmStreamParameters_t; + +typedef struct { + u8 len; + u8 type; + u8 subtyle; + u8 unitid; + u16 terminaltype; + u8 assocterminal; + u8 sourceid; + u8 iterminal; + u32 BARLocation; + u8 flags; + u8 interruptid; + u8 buffercount; + u8 metadatasize; + u8 numformats; + u8 controlsize; +} __attribute__((packed)) tmComResDMATermDescrHeader_t; + +/* + * + * Description: + * This is the transport stream format header. + * + * Settings: + * bLength - The size of this descriptor in bytes. + * bDescriptorType - CS_INTERFACE. + * bDescriptorSubtype - VS_FORMAT_MPEG2TS descriptor subtype. + * bFormatIndex - A non-zero constant that uniquely identifies the + * format. + * bDataOffset - Offset to TSP packet within MPEG-2 TS transport + * stride, in bytes. + * bPacketLength - Length of TSP packet, in bytes (typically 188). + * bStrideLength - Length of MPEG-2 TS transport stride. + * guidStrideFormat - A Globally Unique Identifier indicating the + * format of the stride data (if any). Set to zeros + * if there is no Stride Data, or if the Stride + * Data is to be ignored by the application. + * + */ +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 bFormatIndex; + u8 bDataOffset; + u8 bPacketLength; + u8 bStrideLength; + u8 guidStrideFormat[16]; +} __attribute__((packed)) tmComResTSFormatDescrHeader_t; + diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h new file mode 100644 index 00000000000..ed38118ffde --- /dev/null +++ b/drivers/media/video/saa7164/saa7164.h @@ -0,0 +1,401 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + Driver architecture + ******************* + + saa7164_core.c/buffer.c/cards.c/i2c.c/dvb.c + | : Standard Linux driver framework for creating + | : exposing and managing interfaces to the rest + | : of the kernel or userland. Also uses _fw.c to load + | : firmware direct into the PCIe bus, bypassing layers. + V + saa7164_api..() : Translate kernel specific functions/features + | : into command buffers. + V + saa7164_cmd..() : Manages the flow of command packets on/off, + | : the bus. Deal with bus errors, timeouts etc. + V + saa7164_bus..() : Manage a read/write memory ring buffer in the + | : PCIe Address space. + | + | saa7164_fw...() : Load any frimware + | | : direct into the device + V V + <- ----------------- PCIe address space -------------------- -> +*/ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "saa7164-reg.h" +#include "saa7164-types.h" + +#include +#include + +#define SAA7164_MAXBOARDS 8 + +#define UNSET (-1U) +#define SAA7164_BOARD_NOAUTO UNSET +#define SAA7164_BOARD_UNKNOWN 0 +#define SAA7164_BOARD_UNKNOWN_REV2 1 +#define SAA7164_BOARD_UNKNOWN_REV3 2 +#define SAA7164_BOARD_HAUPPAUGE_HVR2250 3 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200 4 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_2 5 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6 +#define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7 + +#define SAA7164_MAX_UNITS 8 +#define SAA7164_TS_NUMBER_OF_LINES 312 +#define SAA7164_PT_ENTRIES 16 /* (312 * 188) / 4096 */ + +#define DBGLVL_FW 4 +#define DBGLVL_DVB 8 +#define DBGLVL_I2C 16 +#define DBGLVL_API 32 +#define DBGLVL_CMD 64 +#define DBGLVL_BUS 128 +#define DBGLVL_IRQ 256 +#define DBGLVL_BUF 512 + +enum port_t { + SAA7164_MPEG_UNDEFINED = 0, + SAA7164_MPEG_DVB, +}; + +enum saa7164_i2c_bus_nr { + SAA7164_I2C_BUS_0 = 0, + SAA7164_I2C_BUS_1, + SAA7164_I2C_BUS_2, +}; + +enum saa7164_buffer_flags { + SAA7164_BUFFER_UNDEFINED = 0, + SAA7164_BUFFER_FREE, + SAA7164_BUFFER_BUSY, + SAA7164_BUFFER_FULL +}; + +enum saa7164_unit_type { + SAA7164_UNIT_UNDEFINED = 0, + SAA7164_UNIT_DIGITAL_DEMODULATOR, + SAA7164_UNIT_ANALOG_DEMODULATOR, + SAA7164_UNIT_TUNER, + SAA7164_UNIT_EEPROM, + SAA7164_UNIT_ZILOG_IRBLASTER, + SAA7164_UNIT_ENCODER, +}; + +/* The PCIe bridge doesn't grant direct access to i2c. + * Instead, you address i2c devices using a uniqely + * allocated 'unitid' value via a messaging API. This + * is a problem. The kernel and existing demod/tuner + * drivers expect to talk 'i2c', so we have to maintain + * a translation layer, and a series of functions to + * convert i2c bus + device address into a unit id. + */ +struct saa7164_unit { + enum saa7164_unit_type type; + u8 id; + char *name; + enum saa7164_i2c_bus_nr i2c_bus_nr; + u8 i2c_bus_addr; + u8 i2c_reg_len; +}; + +struct saa7164_board { + char *name; + enum port_t porta, portb; + enum { + SAA7164_CHIP_UNDEFINED = 0, + SAA7164_CHIP_REV2, + SAA7164_CHIP_REV3, + } chiprev; + struct saa7164_unit unit[SAA7164_MAX_UNITS]; +}; + +struct saa7164_subid { + u16 subvendor; + u16 subdevice; + u32 card; +}; + +struct saa7164_fw_status { + + /* RISC Core details */ + u32 status; + u32 mode; + u32 spec; + u32 inst; + u32 cpuload; + u32 remainheap; + + /* Firmware version */ + u32 version; + u32 major; + u32 sub; + u32 rel; + u32 buildnr; +}; + +struct saa7164_dvb { + struct mutex lock; + struct dvb_adapter adapter; + struct dvb_frontend *frontend; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + struct dvb_net net; + int feeding; +}; + +struct saa7164_i2c { + struct saa7164_dev *dev; + + enum saa7164_i2c_bus_nr nr; + + /* I2C I/O */ + struct i2c_adapter i2c_adap; + struct i2c_algo_bit_data i2c_algo; + struct i2c_client i2c_client; + u32 i2c_rc; +}; + +struct saa7164_tsport; + +struct saa7164_buffer { + struct list_head list; + + u32 nr; + + struct saa7164_tsport *port; + + /* Hardware Specific */ + /* PCI Memory allocations */ + enum saa7164_buffer_flags flags; /* Free, Busy, Full */ + + /* A block of page align PCI memory */ + u32 pci_size; /* PCI allocation size in bytes */ + u64 *cpu; /* Virtual address */ + dma_addr_t dma; /* Physical address */ + + /* A page table that splits the block into a number of entries */ + u32 pt_size; /* PCI allocation size in bytes */ + u64 *pt_cpu; /* Virtual address */ + dma_addr_t pt_dma; /* Physical address */ +}; + +struct saa7164_tsport { + + struct saa7164_dev *dev; + int nr; + enum port_t type; + + struct saa7164_dvb dvb; + + /* HW related stream parameters */ + tmHWStreamParameters_t hw_streamingparams; + + /* DMA configuration values, is seeded during initialization */ + tmComResDMATermDescrHeader_t hwcfg; + + /* hardware specific registers */ + u32 bufcounter; + u32 pitch; + u32 bufsize; + u32 bufoffset; + u32 bufptr32l; + u32 bufptr32h; + u64 bufptr64; + + u32 numpte; /* Number of entries in array, only valid in head */ + struct mutex dmaqueue_lock; + struct mutex dummy_dmaqueue_lock; + struct saa7164_buffer dmaqueue; + struct saa7164_buffer dummy_dmaqueue; + +}; + +struct saa7164_dev { + struct list_head devlist; + atomic_t refcount; + + /* pci stuff */ + struct pci_dev *pci; + unsigned char pci_rev, pci_lat; + int pci_bus, pci_slot; + u32 __iomem *lmmio; + u8 __iomem *bmmio; + u32 __iomem *lmmio2; + u8 __iomem *bmmio2; + int pci_irqmask; + + /* board details */ + int nr; + int hwrevision; + u32 board; + char name[32]; + + /* firmware status */ + struct saa7164_fw_status fw_status; + + tmComResHWDescr_t hwdesc; + tmComResInterfaceDescr_t intfdesc; + tmComResBusDescr_t busdesc; + + tmComResBusInfo_t bus; + + /* TODO: Urgh, remove volatiles */ + volatile u32 *InterruptStatus; + volatile u32 *InterruptAck; + + struct cmd cmds[SAA_CMD_MAX_MSG_UNITS]; + struct mutex lock; + + /* I2c related */ + struct saa7164_i2c i2c_bus[3]; + + /* Transport related */ + struct saa7164_tsport ts1, ts2; + + /* Deferred command/api interrupts handling */ + struct work_struct workcmd; + +}; + +extern struct list_head saa7164_devlist; + +/* ----------------------------------------------------------- */ +/* saa7164-core.c */ +void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr); +void saa7164_dumphex16(struct saa7164_dev *dev, u8 *buf, int len); +void saa7164_getfirmwarestatus(struct saa7164_dev *dev); +u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev); + +/* ----------------------------------------------------------- */ +/* saa7164-fw.c */ +int saa7164_downloadfirmware(struct saa7164_dev *dev); + +/* ----------------------------------------------------------- */ +/* saa7164-i2c.c */ +extern int saa7164_i2c_register(struct saa7164_i2c *bus); +extern int saa7164_i2c_unregister(struct saa7164_i2c *bus); +extern void saa7164_call_i2c_clients(struct saa7164_i2c *bus, + unsigned int cmd, void *arg); + +/* ----------------------------------------------------------- */ +/* saa7164-bus.c */ +int saa7164_bus_setup(struct saa7164_dev *dev); +void saa7164_bus_dump(struct saa7164_dev *dev); +int saa7164_bus_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf); +int saa7164_bus_get(struct saa7164_dev *dev, tmComResInfo_t* msg, + void *buf, int peekonly); + +/* ----------------------------------------------------------- */ +/* saa7164-cmd.c */ +int saa7164_cmd_send(struct saa7164_dev *dev, + u8 id, tmComResCmd_t command, u16 controlselector, + u16 size, void *buf); +void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno); + +/* ----------------------------------------------------------- */ +/* saa7164-api.c */ +int saa7164_api_test(struct saa7164_dev *dev); +int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version); +int saa7164_api_enum_subdevs(struct saa7164_dev *dev); +int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, + u32 datalen, u8 *data); +int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, + u32 datalen, u8 *data); +int saa7164_api_dif_write(struct saa7164_i2c *bus, u8 addr, + u32 datalen, u8 *data); +int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen); +int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, u8 pin); +int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, u8 pin); +int saa7164_api_transition_port(struct saa7164_tsport *port, u8 mode); + +/* ----------------------------------------------------------- */ +/* saa7164-cards.c */ +extern struct saa7164_board saa7164_boards[]; +extern const unsigned int saa7164_bcount; + +extern struct saa7164_subid saa7164_subids[]; +extern const unsigned int saa7164_idcount; + +extern void saa7164_card_list(struct saa7164_dev *dev); +extern void saa7164_gpio_setup(struct saa7164_dev *dev); +extern void saa7164_card_setup(struct saa7164_dev *dev); + +extern int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr); +extern int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr); +extern char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid); + +/* ----------------------------------------------------------- */ +/* saa7164-dvb.c */ +extern int saa7164_dvb_register(struct saa7164_tsport *port); +extern int saa7164_dvb_unregister(struct saa7164_tsport *port); + +/* ----------------------------------------------------------- */ +/* saa7164-buffer.c */ +extern struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_tsport *port, + u32 len); +extern int saa7164_buffer_dealloc(struct saa7164_tsport *port, + struct saa7164_buffer *buf); + +/* ----------------------------------------------------------- */ + +extern unsigned int debug; +#define dprintk(level, fmt, arg...)\ + do { if (debug & level)\ + printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\ + } while (0) + +#define log_warn(fmt, arg...)\ + do { \ + printk(KERN_WARNING "%s: " fmt, dev->name, ## arg);\ + } while (0) + +#define log_err(fmt, arg...)\ + do { \ + printk(KERN_ERROR "%s: " fmt, dev->name, ## arg);\ + } while (0) + +#define saa7164_readl(reg) readl(dev->lmmio + ((reg) >> 2)) +#define saa7164_writel(reg, value) \ +do { \ + printk(KERN_ERR "writel(%x, %llx)\n", value, (u64)(dev->lmmio + ((reg) >> 2))); \ + writel((value), dev->lmmio + ((reg) >> 2)); \ +} while (0) + +#define saa7164_readb(reg) readl(dev->bmmio + (reg)) +#define saa7164_writeb(reg, value) writel((value), dev->bmmio + (reg)) + -- cgit v1.2.3-70-g09d2 From e333522225ac5c4f37ea49c12724e6c67d896214 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 11 May 2009 22:03:07 -0300 Subject: V4L/DVB (12931): SAA7164: Fix the 88021 definition to work with production boards. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7164 | 3 +- drivers/media/video/saa7164/saa7164-cards.c | 61 ++++++++++++++++++++++++++++- drivers/media/video/saa7164/saa7164-dvb.c | 1 + drivers/media/video/saa7164/saa7164.h | 1 + 4 files changed, 63 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7164 b/Documentation/video4linux/CARDLIST.saa7164 index d1e8217e436..d9bcb5a7e45 100644 --- a/Documentation/video4linux/CARDLIST.saa7164 +++ b/Documentation/video4linux/CARDLIST.saa7164 @@ -5,4 +5,5 @@ 4 -> Hauppauge WinTV-HVR2200 [0070:8980] 5 -> Hauppauge WinTV-HVR2200 [0070:8900] 6 -> Hauppauge WinTV-HVR2200 [0070:8901] - 7 -> Hauppauge WinTV-HVR2250 [0070:88A1,0070:8891] + 7 -> Hauppauge WinTV-HVR2250 [0070:8891] + 8 -> Hauppauge WinTV-HVR2250 [0070:88A1] diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c index 0678b5f31bd..9274e1c2187 100644 --- a/drivers/media/video/saa7164/saa7164-cards.c +++ b/drivers/media/video/saa7164/saa7164-cards.c @@ -303,6 +303,62 @@ struct saa7164_board saa7164_boards[] = { .i2c_reg_len = REGLEN_8bit, } }, }, + [SAA7164_BOARD_HAUPPAUGE_HVR2250_3] = { + .name = "Hauppauge WinTV-HVR2250", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x22, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x07, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x08, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x22, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x24, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x27, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, }; const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards); @@ -333,7 +389,7 @@ struct saa7164_subid saa7164_subids[] = { }, { .subvendor = 0x0070, .subdevice = 0x88A1, - .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_3, }, { .subvendor = 0x0070, .subdevice = 0x8891, @@ -385,6 +441,7 @@ void saa7164_gpio_setup(struct saa7164_dev *dev) case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: case SAA7164_BOARD_HAUPPAUGE_HVR2250: case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: /* GPIO 2: s5h1411 / tda10048-1 demod reset GPIO 3: s5h1411 / tda10048-2 demod reset @@ -464,7 +521,7 @@ void saa7164_card_setup(struct saa7164_dev *dev) case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: case SAA7164_BOARD_HAUPPAUGE_HVR2250: - case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: hauppauge_eeprom(dev, &eeprom[0]); break; } diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c index e9ff88a11a1..67e4f9d3d24 100644 --- a/drivers/media/video/saa7164/saa7164-dvb.c +++ b/drivers/media/video/saa7164/saa7164-dvb.c @@ -542,6 +542,7 @@ int saa7164_dvb_register(struct saa7164_tsport *port) break; case SAA7164_BOARD_HAUPPAUGE_HVR2250: case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: i2c_bus = &dev->i2c_bus[port->nr + 1]; port->dvb.frontend = dvb_attach(s5h1411_attach, diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h index dd8991b2801..e0d8ec0fd95 100644 --- a/drivers/media/video/saa7164/saa7164.h +++ b/drivers/media/video/saa7164/saa7164.h @@ -72,6 +72,7 @@ #define SAA7164_BOARD_HAUPPAUGE_HVR2200_2 5 #define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7 +#define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8 #define SAA7164_MAX_UNITS 8 #define SAA7164_TS_NUMBER_OF_LINES 312 -- cgit v1.2.3-70-g09d2 From 3a360ced7b3756efbfe822871cc36dc0490fc46b Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 3 Sep 2009 23:46:16 -0300 Subject: V4L/DVB (12946): SAA7164: Add support for a new HVR-2250 hardware revision SAA7164: Add support for a new HVR-2250 hardware revision Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7164 | 2 +- drivers/media/video/saa7164/saa7164-cards.c | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7164 b/Documentation/video4linux/CARDLIST.saa7164 index d9bcb5a7e45..152bd7b781c 100644 --- a/Documentation/video4linux/CARDLIST.saa7164 +++ b/Documentation/video4linux/CARDLIST.saa7164 @@ -5,5 +5,5 @@ 4 -> Hauppauge WinTV-HVR2200 [0070:8980] 5 -> Hauppauge WinTV-HVR2200 [0070:8900] 6 -> Hauppauge WinTV-HVR2200 [0070:8901] - 7 -> Hauppauge WinTV-HVR2250 [0070:8891] + 7 -> Hauppauge WinTV-HVR2250 [0070:8891,0070:8851] 8 -> Hauppauge WinTV-HVR2250 [0070:88A1] diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c index c936604e622..a3c299405f4 100644 --- a/drivers/media/video/saa7164/saa7164-cards.c +++ b/drivers/media/video/saa7164/saa7164-cards.c @@ -394,6 +394,10 @@ struct saa7164_subid saa7164_subids[] = { .subvendor = 0x0070, .subdevice = 0x8891, .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8851, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, }, }; const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids); -- cgit v1.2.3-70-g09d2 From e558170a91677d3065be3922bb4467d8969d875c Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 15 Sep 2009 14:37:20 -0300 Subject: V4L/DVB (12950): tuner-simple: add Philips CU1216L add Philips CU1216L NIM Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.tuner | 1 + drivers/media/common/tuners/tuner-types.c | 23 +++++++++++++++++++++++ include/media/tuner.h | 1 + 3 files changed, 25 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index ba9fa679e2d..3561b09fb41 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -79,3 +79,4 @@ tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner tuner=79 - Philips PAL/SECAM multi (FM1216 MK5) tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough tuner=81 - Partsnic (Daewoo) PTI-5NF05 +tuner=82 - Philips CU1216L diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index 5c6ef1e23c9..a2204df796e 100644 --- a/drivers/media/common/tuners/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -1320,6 +1320,23 @@ static struct tuner_params tuner_partsnic_pti_5nf05_params[] = { }, }; +/* --------- TUNER_PHILIPS_CU1216L - DVB-C NIM ------------------------- */ + +static struct tuner_range tuner_cu1216l_ranges[] = { + { 16 * 160.25 /*MHz*/, 0xce, 0x01 }, + { 16 * 444.25 /*MHz*/, 0xce, 0x02 }, + { 16 * 999.99 , 0xce, 0x04 }, +}; + +static struct tuner_params tuner_philips_cu1216l_params[] = { + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_cu1216l_ranges, + .count = ARRAY_SIZE(tuner_cu1216l_ranges), + .iffreq = 16 * 36.125, /*MHz*/ + }, +}; + /* --------------------------------------------------------------------- */ struct tunertype tuners[] = { @@ -1778,6 +1795,12 @@ struct tunertype tuners[] = { .params = tuner_partsnic_pti_5nf05_params, .count = ARRAY_SIZE(tuner_partsnic_pti_5nf05_params), }, + [TUNER_PHILIPS_CU1216L] = { + .name = "Philips CU1216L", + .params = tuner_philips_cu1216l_params, + .count = ARRAY_SIZE(tuner_philips_cu1216l_params), + .stepsize = 62500, + }, }; EXPORT_SYMBOL(tuners); diff --git a/include/media/tuner.h b/include/media/tuner.h index c146f2f530b..b1f57e175e9 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -127,6 +127,7 @@ #define TUNER_PHILIPS_FM1216MK5 79 #define TUNER_PHILIPS_FQ1216LME_MK3 80 /* Active loopthrough, no FM */ #define TUNER_PARTSNIC_PTI_5NF05 81 +#define TUNER_PHILIPS_CU1216L 82 /* tv card specific */ #define TDA9887_PRESENT (1<<0) -- cgit v1.2.3-70-g09d2 From 285eb1a40242adb3feaf9c73d352cbfeee1bea1c Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 15 Sep 2009 14:42:13 -0300 Subject: V4L/DVB (12951): em28xx: add Reddo DVB-C USB TV Box Support for Reddo DVB-C USB TV Box device. Remote is not working yet. Thanks to Benjamin Larsson Cc: Benjamin Larsson Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 3 ++- drivers/media/video/em28xx/Kconfig | 1 + drivers/media/video/em28xx/em28xx-cards.c | 24 ++++++++++++++++++++++++ drivers/media/video/em28xx/em28xx-dvb.c | 19 +++++++++++++++++++ drivers/media/video/em28xx/em28xx.h | 1 + 5 files changed, 47 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index b13fcbd5d94..b8afef4c0e0 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -1,5 +1,5 @@ 0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800] - 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] + 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868] 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201] @@ -68,3 +68,4 @@ 70 -> Evga inDtube (em2882) 71 -> Silvercrest Webcam 1.3mpix (em2820/em2840) 72 -> Gadmei UTV330+ (em2861) + 73 -> Reddo DVB-C USB TV Box (em2870) diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 6524b493e03..c7be0e09782 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -36,6 +36,7 @@ config VIDEO_EM28XX_DVB depends on VIDEO_EM28XX && DVB_CORE select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_TDA10023 if !DVB_FE_CUSTOMISE select VIDEOBUF_DVB ---help--- This adds support for DVB cards based on the diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 2479c6f8641..8a5ce818170 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -170,6 +170,19 @@ static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { { -1, -1, -1, -1}, }; +/* eb1a:2868 Reddo DVB-C USB TV Box + GPIO4 - CU1216L NIM + Other GPIOs seems to be don't care. */ +static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { + {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, + {EM28XX_R08_GPIO, 0xde, 0xff, 10}, + {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0x7f, 0xff, 10}, + {EM28XX_R08_GPIO, 0x6f, 0xff, 10}, + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {-1, -1, -1, -1}, +}; /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { @@ -1566,6 +1579,14 @@ struct em28xx_board em28xx_boards[] = { .gpio = evga_indtube_analog, } }, }, + /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + + Infineon TUA6034) */ + [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { + .name = "Reddo DVB-C USB TV Box", + .tuner_type = TUNER_ABSENT, + .has_dvb = 1, + .dvb_gpio = reddo_dvb_c_usb_box, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1593,6 +1614,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2883), .driver_info = EM2820_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2868), + .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0xe300), .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, { USB_DEVICE(0xeb1a, 0xe303), @@ -1696,6 +1719,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = { {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, + {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, }; /* I2C devicelist hash table for devices with generic USB IDs */ diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index d603575431b..db749461e5c 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -33,6 +33,7 @@ #include "s5h1409.h" #include "mt352.h" #include "mt352_priv.h" /* FIXME */ +#include "tda1002x.h" MODULE_DESCRIPTION("driver for em28xx based DVB cards"); MODULE_AUTHOR("Mauro Carvalho Chehab "); @@ -295,6 +296,11 @@ static struct mt352_config terratec_xs_mt352_cfg = { .demod_init = mt352_terratec_xs_init, }; +static struct tda10023_config em28xx_tda10023_config = { + .demod_address = 0x0c, + .invert = 1, +}; + /* ------------------------------------------------------------------ */ static int attach_xc3028(u8 addr, struct em28xx *dev) @@ -549,6 +555,19 @@ static int dvb_init(struct em28xx *dev) } break; #endif + case EM2870_BOARD_REDDO_DVB_C_USB_BOX: + /* Philips CU1216L NIM (Philips TDA10023 + Infineon TUA6034) */ + dvb->frontend = dvb_attach(tda10023_attach, + &em28xx_tda10023_config, + &dev->i2c_adap, 0x48); + if (dvb->frontend) { + if (!dvb_attach(simple_tuner_attach, dvb->frontend, + &dev->i2c_adap, 0x60, TUNER_PHILIPS_CU1216L)) { + result = -EINVAL; + goto out_free; + } + } + break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card" " isn't supported yet\n", diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index b4a6e07236d..0a73e8bf0d6 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -109,6 +109,7 @@ #define EM2882_BOARD_EVGA_INDTUBE 70 #define EM2820_BOARD_SILVERCREST_WEBCAM 71 #define EM2861_BOARD_GADMEI_UTV330PLUS 72 +#define EM2870_BOARD_REDDO_DVB_C_USB_BOX 73 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 -- cgit v1.2.3-70-g09d2 From 4f7cb8837cec65ade18b0e2655292fd98040234e Mon Sep 17 00:00:00 2001 From: Olivier Lorin Date: Tue, 15 Sep 2009 14:17:07 -0300 Subject: V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams - add the Genesys Logic 05e3:0503 and 05e3:f191 webcam Signed-off-by: Olivier Lorin Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 2 + drivers/media/video/gspca/Kconfig | 1 + drivers/media/video/gspca/Makefile | 1 + drivers/media/video/gspca/gl860/Kconfig | 8 + drivers/media/video/gspca/gl860/Makefile | 10 + drivers/media/video/gspca/gl860/gl860-mi1320.c | 537 ++++++++++++++ drivers/media/video/gspca/gl860/gl860-mi2020.c | 937 +++++++++++++++++++++++++ drivers/media/video/gspca/gl860/gl860-ov2640.c | 505 +++++++++++++ drivers/media/video/gspca/gl860/gl860-ov9655.c | 337 +++++++++ drivers/media/video/gspca/gl860/gl860.c | 783 +++++++++++++++++++++ drivers/media/video/gspca/gl860/gl860.h | 108 +++ 11 files changed, 3229 insertions(+) create mode 100644 drivers/media/video/gspca/gl860/Kconfig create mode 100644 drivers/media/video/gspca/gl860/Makefile create mode 100644 drivers/media/video/gspca/gl860/gl860-mi1320.c create mode 100644 drivers/media/video/gspca/gl860/gl860-mi2020.c create mode 100644 drivers/media/video/gspca/gl860/gl860-ov2640.c create mode 100644 drivers/media/video/gspca/gl860/gl860-ov9655.c create mode 100644 drivers/media/video/gspca/gl860/gl860.c create mode 100644 drivers/media/video/gspca/gl860/gl860.h (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 4686e84dd80..3f61825be49 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -173,6 +173,8 @@ ov519 05a9:8519 OmniVision ov519 05a9:a518 D-Link DSB-C310 Webcam sunplus 05da:1018 Digital Dream Enigma 1.3 stk014 05e1:0893 Syntek DV4000 +gl860 05e3:0503 Genesys Logic PC Camera +gl860 05e3:f191 Genesys Logic PC Camera spca561 060b:a001 Maxell Compact Pc PM3 zc3xx 0698:2003 CTX M730V built in spca500 06bd:0404 Agfa CL20 diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 8897283b0bb..fe2e490ebc5 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -19,6 +19,7 @@ if USB_GSPCA && VIDEO_V4L2 source "drivers/media/video/gspca/m5602/Kconfig" source "drivers/media/video/gspca/stv06xx/Kconfig" +source "drivers/media/video/gspca/gl860/Kconfig" config USB_GSPCA_CONEX tristate "Conexant Camera Driver" diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index 035616b5e86..b7420818037 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -58,3 +58,4 @@ gspca_zc3xx-objs := zc3xx.o obj-$(CONFIG_USB_M5602) += m5602/ obj-$(CONFIG_USB_STV06XX) += stv06xx/ +obj-$(CONFIG_USB_GL860) += gl860/ diff --git a/drivers/media/video/gspca/gl860/Kconfig b/drivers/media/video/gspca/gl860/Kconfig new file mode 100644 index 00000000000..22772f53ec7 --- /dev/null +++ b/drivers/media/video/gspca/gl860/Kconfig @@ -0,0 +1,8 @@ +config USB_GL860 + tristate "GL860 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the GL860 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_gl860. diff --git a/drivers/media/video/gspca/gl860/Makefile b/drivers/media/video/gspca/gl860/Makefile new file mode 100644 index 00000000000..13c9403cc87 --- /dev/null +++ b/drivers/media/video/gspca/gl860/Makefile @@ -0,0 +1,10 @@ +obj-$(CONFIG_USB_GL860) += gspca_gl860.o + +gspca_gl860-objs := gl860.o \ + gl860-mi1320.o \ + gl860-ov2640.o \ + gl860-ov9655.o \ + gl860-mi2020.o + +EXTRA_CFLAGS += -Idrivers/media/video/gspca + diff --git a/drivers/media/video/gspca/gl860/gl860-mi1320.c b/drivers/media/video/gspca/gl860/gl860-mi1320.c new file mode 100644 index 00000000000..39f6261c1a0 --- /dev/null +++ b/drivers/media/video/gspca/gl860/gl860-mi1320.c @@ -0,0 +1,537 @@ +/* @file gl860-mi1320.c + * @author Olivier LORIN from my logs + * @date 2009-08-27 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Sensor : MI1320 */ + +#include "gl860.h" + +static struct validx tbl_common[] = { + {0xba00, 0x00f0}, {0xba00, 0x00f1}, {0xba51, 0x0066}, {0xba02, 0x00f1}, + {0xba05, 0x0067}, {0xba05, 0x00f1}, {0xbaa0, 0x0065}, {0xba00, 0x00f1}, + {0xffff, 0xffff}, + {0xba00, 0x00f0}, {0xba02, 0x00f1}, {0xbafa, 0x0028}, {0xba02, 0x00f1}, + {0xba00, 0x00f0}, {0xba01, 0x00f1}, {0xbaf0, 0x0006}, {0xba0e, 0x00f1}, + {0xba70, 0x0006}, {0xba0e, 0x00f1}, + {0xffff, 0xffff}, + {0xba74, 0x0006}, {0xba0e, 0x00f1}, + {0xffff, 0xffff}, + {0x0061, 0x0000}, {0x0068, 0x000d}, +}; + +static struct validx tbl_init_at_startup[] = { + {0x0000, 0x0000}, {0x0010, 0x0010}, + {35, 0xffff}, + {0x0008, 0x00c0}, {0x0001, 0x00c1}, {0x0001, 0x00c2}, {0x0020, 0x0006}, + {0x006a, 0x000d}, +}; + +static struct validx tbl_sensor_settings_common[] = { + {0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042, 0x00c2}, {0x0040, 0x0000}, + {0x006a, 0x0007}, {0x006a, 0x000d}, {0x0063, 0x0006}, +}; +static struct validx tbl_sensor_settings_1280[] = { + {0xba00, 0x00f0}, {0xba00, 0x00f1}, {0xba5a, 0x0066}, {0xba02, 0x00f1}, + {0xba05, 0x0067}, {0xba05, 0x00f1}, {0xba20, 0x0065}, {0xba00, 0x00f1}, +}; +static struct validx tbl_sensor_settings_800[] = { + {0xba00, 0x00f0}, {0xba00, 0x00f1}, {0xba5a, 0x0066}, {0xba02, 0x00f1}, + {0xba05, 0x0067}, {0xba05, 0x00f1}, {0xba20, 0x0065}, {0xba00, 0x00f1}, +}; +static struct validx tbl_sensor_settings_640[] = { + {0xba00, 0x00f0}, {0xba00, 0x00f1}, {0xbaa0, 0x0065}, {0xba00, 0x00f1}, + {0xba51, 0x0066}, {0xba02, 0x00f1}, {0xba05, 0x0067}, {0xba05, 0x00f1}, + {0xba20, 0x0065}, {0xba00, 0x00f1}, +}; +static struct validx tbl_post_unset_alt[] = { + {0xba00, 0x00f0}, {0xba00, 0x00f1}, {0xbaa0, 0x0065}, {0xba00, 0x00f1}, + {0x0061, 0x0000}, {0x0068, 0x000d}, +}; + +static u8 *tbl_1280[] = { + "\x0d\x80\xf1\x08\x03\x04\xf1\x00" "\x04\x05\xf1\x02\x05\x00\xf1\xf1" + "\x06\x00\xf1\x0d\x20\x01\xf1\x00" "\x21\x84\xf1\x00\x0d\x00\xf1\x08" + "\xf0\x00\xf1\x01\x34\x00\xf1\x00" "\x9b\x43\xf1\x00\xa6\x05\xf1\x00" + "\xa9\x04\xf1\x00\xa1\x05\xf1\x00" "\xa4\x04\xf1\x00\xae\x0a\xf1\x08" + , + "\xf0\x00\xf1\x02\x3a\x05\xf1\xf1" "\x3c\x05\xf1\xf1\x59\x01\xf1\x47" + "\x5a\x01\xf1\x88\x5c\x0a\xf1\x06" "\x5d\x0e\xf1\x0a\x64\x5e\xf1\x1c" + "\xd2\x00\xf1\xcf\xcb\x00\xf1\x01" + , + "\xd3\x02\xd4\x28\xd5\x01\xd0\x02" "\xd1\x18\xd2\xc1" +}; + +static u8 *tbl_800[] = { + "\x0d\x80\xf1\x08\x03\x03\xf1\xc0" "\x04\x05\xf1\x02\x05\x00\xf1\xf1" + "\x06\x00\xf1\x0d\x20\x01\xf1\x00" "\x21\x84\xf1\x00\x0d\x00\xf1\x08" + "\xf0\x00\xf1\x01\x34\x00\xf1\x00" "\x9b\x43\xf1\x00\xa6\x05\xf1\x00" + "\xa9\x03\xf1\xc0\xa1\x03\xf1\x20" "\xa4\x02\xf1\x5a\xae\x0a\xf1\x08" + , + "\xf0\x00\xf1\x02\x3a\x05\xf1\xf1" "\x3c\x05\xf1\xf1\x59\x01\xf1\x47" + "\x5a\x01\xf1\x88\x5c\x0a\xf1\x06" "\x5d\x0e\xf1\x0a\x64\x5e\xf1\x1c" + "\xd2\x00\xf1\xcf\xcb\x00\xf1\x01" + , + "\xd3\x02\xd4\x18\xd5\x21\xd0\x02" "\xd1\x10\xd2\x59" +}; + +static u8 *tbl_640[] = { + "\x0d\x80\xf1\x08\x03\x04\xf1\x04" "\x04\x05\xf1\x02\x07\x01\xf1\x7c" + "\x08\x00\xf1\x0e\x21\x80\xf1\x00" "\x0d\x00\xf1\x08\xf0\x00\xf1\x01" + "\x34\x10\xf1\x10\x3a\x43\xf1\x00" "\xa6\x05\xf1\x02\xa9\x04\xf1\x04" + "\xa7\x02\xf1\x81\xaa\x01\xf1\xe2" "\xae\x0c\xf1\x09" + , + "\xf0\x00\xf1\x02\x39\x03\xf1\xfc" "\x3b\x04\xf1\x04\x57\x01\xf1\xb6" + "\x58\x02\xf1\x0d\x5c\x1f\xf1\x19" "\x5d\x24\xf1\x1e\x64\x5e\xf1\x1c" + "\xd2\x00\xf1\x00\xcb\x00\xf1\x01" + , + "\xd3\x02\xd4\x10\xd5\x81\xd0\x02" "\xd1\x08\xd2\xe1" +}; + +static s32 tbl_sat[] = {0x25, 0x1d, 0x15, 0x0d, 0x05, 0x4d, 0x55, 0x5d, 0x2d}; +static s32 tbl_bright[] = {0, 8, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70}; +static s32 tbl_backlight[] = {0x0e, 0x06, 0x02}; + +static s32 tbl_cntr1[] = { + 0x90, 0x98, 0xa0, 0xa8, 0xb0, 0xb8, 0xc0, 0xc8, 0xd0, 0xe0, 0xf0}; +static s32 tbl_cntr2[] = { + 0x70, 0x68, 0x60, 0x58, 0x50, 0x48, 0x40, 0x38, 0x30, 0x20, 0x10}; + +static u8 dat_wbalNL[] = + "\xf0\x00\xf1\x01\x05\x00\xf1\x06" "\x3b\x04\xf1\x2a\x47\x10\xf1\x10" + "\x9d\x3c\xf1\xae\xaf\x10\xf1\x00" "\xf0\x00\xf1\x02\x2f\x91\xf1\x20" + "\x9c\x91\xf1\x20\x37\x03\xf1\x00" "\x9d\xc5\xf1\x0f\xf0\x00\xf1\x00"; + +static u8 dat_wbalLL[] = + "\xf0\x00\xf1\x01\x05\x00\xf1\x0c" "\x3b\x04\xf1\x2a\x47\x40\xf1\x40" + "\x9d\x20\xf1\xae\xaf\x10\xf1\x00" "\xf0\x00\xf1\x02\x2f\xd1\xf1\x00" + "\x9c\xd1\xf1\x00\x37\x03\xf1\x00" "\x9d\xc5\xf1\x3f\xf0\x00\xf1\x00"; + +static u8 dat_wbalBL[] = + "\xf0\x00\xf1\x01\x05\x00\xf1\x06" "\x47\x10\xf1\x30\x9d\x3c\xf1\xae" + "\xaf\x10\xf1\x00\xf0\x00\xf1\x02" "\x2f\x91\xf1\x20\x9c\x91\xf1\x20" + "\x37\x03\xf1\x00\x9d\xc5\xf1\x2f" "\xf0\x00\xf1\x00"; + +static u8 dat_hvflip1[] = {0xf0, 0x00, 0xf1, 0x00}; + +static u8 s000[] = + "\x00\x01\x07\x6a\x06\x63\x0d\x6a" "\xc0\x00\x10\x10\xc1\x03\xc2\x42" + "\xd8\x04\x58\x00\x04\x02"; +static u8 s001[] = + "\x0d\x00\xf1\x0b\x0d\x00\xf1\x08" "\x35\x00\xf1\x22\x68\x00\xf1\x5d" + "\xf0\x00\xf1\x01\x06\x70\xf1\x0e" "\xf0\x00\xf1\x02\xdd\x18\xf1\xe0"; +static u8 s002[] = + "\x05\x01\xf1\x84\x06\x00\xf1\x44" "\x07\x00\xf1\xbe\x08\x00\xf1\x1e" + "\x20\x01\xf1\x03\x21\x84\xf1\x00" "\x22\x0d\xf1\x0f\x24\x80\xf1\x00" + "\x34\x18\xf1\x2d\x35\x00\xf1\x22" "\x43\x83\xf1\x83\x59\x00\xf1\xff"; +static u8 s003[] = + "\xf0\x00\xf1\x02\x39\x06\xf1\x8c" "\x3a\x06\xf1\x8c\x3b\x03\xf1\xda" + "\x3c\x05\xf1\x30\x57\x01\xf1\x0c" "\x58\x01\xf1\x42\x59\x01\xf1\x0c" + "\x5a\x01\xf1\x42\x5c\x13\xf1\x0e" "\x5d\x17\xf1\x12\x64\x1e\xf1\x1c"; +static u8 s004[] = + "\xf0\x00\xf1\x02\x24\x5f\xf1\x20" "\x28\xea\xf1\x02\x5f\x41\xf1\x43"; +static u8 s005[] = + "\x02\x00\xf1\xee\x03\x29\xf1\x1a" "\x04\x02\xf1\xa4\x09\x00\xf1\x68" + "\x0a\x00\xf1\x2a\x0b\x00\xf1\x04" "\x0c\x00\xf1\x93\x0d\x00\xf1\x82" + "\x0e\x00\xf1\x40\x0f\x00\xf1\x5f" "\x10\x00\xf1\x4e\x11\x00\xf1\x5b"; +static u8 s006[] = + "\x15\x00\xf1\xc9\x16\x00\xf1\x5e" "\x17\x00\xf1\x9d\x18\x00\xf1\x06" + "\x19\x00\xf1\x89\x1a\x00\xf1\x12" "\x1b\x00\xf1\xa1\x1c\x00\xf1\xe4" + "\x1d\x00\xf1\x7a\x1e\x00\xf1\x64" "\xf6\x00\xf1\x5f"; +static u8 s007[] = + "\xf0\x00\xf1\x01\x53\x09\xf1\x03" "\x54\x3d\xf1\x1c\x55\x99\xf1\x72" + "\x56\xc1\xf1\xb1\x57\xd8\xf1\xce" "\x58\xe0\xf1\x00\xdc\x0a\xf1\x03" + "\xdd\x45\xf1\x20\xde\xae\xf1\x82" "\xdf\xdc\xf1\xc9\xe0\xf6\xf1\xea" + "\xe1\xff\xf1\x00"; +static u8 s008[] = + "\xf0\x00\xf1\x01\x80\x00\xf1\x06" "\x81\xf6\xf1\x08\x82\xfb\xf1\xf7" + "\x83\x00\xf1\xfe\xb6\x07\xf1\x03" "\xb7\x18\xf1\x0c\x84\xfb\xf1\x06" + "\x85\xfb\xf1\xf9\x86\x00\xf1\xff" "\xb8\x07\xf1\x04\xb9\x16\xf1\x0a"; +static u8 s009[] = + "\x87\xfa\xf1\x05\x88\xfc\xf1\xf9" "\x89\x00\xf1\xff\xba\x06\xf1\x03" + "\xbb\x17\xf1\x09\x8a\xe8\xf1\x14" "\x8b\xf7\xf1\xf0\x8c\xfd\xf1\xfa" + "\x8d\x00\xf1\x00\xbc\x05\xf1\x01" "\xbd\x0c\xf1\x08\xbe\x00\xf1\x14"; +static u8 s010[] = + "\x8e\xea\xf1\x13\x8f\xf7\xf1\xf2" "\x90\xfd\xf1\xfa\x91\x00\xf1\x00" + "\xbf\x05\xf1\x01\xc0\x0a\xf1\x08" "\xc1\x00\xf1\x0c\x92\xed\xf1\x0f" + "\x93\xf9\xf1\xf4\x94\xfe\xf1\xfb" "\x95\x00\xf1\x00\xc2\x04\xf1\x01" + "\xc3\x0a\xf1\x07\xc4\x00\xf1\x10"; +static u8 s011[] = + "\xf0\x00\xf1\x01\x05\x00\xf1\x06" "\x25\x00\xf1\x55\x34\x10\xf1\x10" + "\x35\xf0\xf1\x10\x3a\x02\xf1\x03" "\x3b\x04\xf1\x2a\x9b\x43\xf1\x00" + "\xa4\x03\xf1\xc0\xa7\x02\xf1\x81"; + +static int mi1320_init_at_startup(struct gspca_dev *gspca_dev); +static int mi1320_configure_alt(struct gspca_dev *gspca_dev); +static int mi1320_init_pre_alt(struct gspca_dev *gspca_dev); +static int mi1320_init_post_alt(struct gspca_dev *gspca_dev); +static void mi1320_post_unset_alt(struct gspca_dev *gspca_dev); +static int mi1320_sensor_settings(struct gspca_dev *gspca_dev); +static int mi1320_camera_settings(struct gspca_dev *gspca_dev); +/*==========================================================================*/ + +void mi1320_init_settings(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vcur.backlight = 0; + sd->vcur.brightness = 0; + sd->vcur.sharpness = 6; + sd->vcur.contrast = 10; + sd->vcur.gamma = 20; + sd->vcur.hue = 0; + sd->vcur.saturation = 6; + sd->vcur.whitebal = 0; + sd->vcur.mirror = 0; + sd->vcur.flip = 0; + sd->vcur.AC50Hz = 1; + + sd->vmax.backlight = 2; + sd->vmax.brightness = 8; + sd->vmax.sharpness = 7; + sd->vmax.contrast = 0; /* 10 but not working with tihs driver */ + sd->vmax.gamma = 40; + sd->vmax.hue = 5 + 1; + sd->vmax.saturation = 8; + sd->vmax.whitebal = 2; + sd->vmax.mirror = 1; + sd->vmax.flip = 1; + sd->vmax.AC50Hz = 1; + + sd->dev_camera_settings = mi1320_camera_settings; + sd->dev_init_at_startup = mi1320_init_at_startup; + sd->dev_configure_alt = mi1320_configure_alt; + sd->dev_init_pre_alt = mi1320_init_pre_alt; + sd->dev_post_unset_alt = mi1320_post_unset_alt; +} + +/*==========================================================================*/ + +static void common(struct gspca_dev *gspca_dev) +{ + s32 n; /* reserved for FETCH macros */ + + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 22, s000); + ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x0000, 0, NULL); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 32, s001); + n = fetch_validx(gspca_dev, tbl_common, ARRAY_SIZE(tbl_common)); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s002); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s003); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 16, s004); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s005); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 44, s006); + keep_on_fetching_validx(gspca_dev, tbl_common, + ARRAY_SIZE(tbl_common), n); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 52, s007); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s008); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s009); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 56, s010); + keep_on_fetching_validx(gspca_dev, tbl_common, + ARRAY_SIZE(tbl_common), n); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 40, s011); + keep_on_fetching_validx(gspca_dev, tbl_common, + ARRAY_SIZE(tbl_common), n); +} + +static int mi1320_init_at_startup(struct gspca_dev *gspca_dev) +{ + fetch_validx(gspca_dev, tbl_init_at_startup, + ARRAY_SIZE(tbl_init_at_startup)); + + common(gspca_dev); + +/* ctrl_out(gspca_dev, 0x40, 11, 0x0000, 0x0000, 0, NULL); */ + + return 0; +} + +static int mi1320_init_pre_alt(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->mirrorMask = 0; + + sd->vold.backlight = -1; + sd->vold.brightness = -1; + sd->vold.sharpness = -1; + sd->vold.contrast = -1; + sd->vold.saturation = -1; + sd->vold.gamma = -1; + sd->vold.hue = -1; + sd->vold.whitebal = -1; + sd->vold.mirror = -1; + sd->vold.flip = -1; + sd->vold.AC50Hz = -1; + + common(gspca_dev); + + mi1320_sensor_settings(gspca_dev); + + mi1320_init_post_alt(gspca_dev); + + return 0; +} + +static int mi1320_init_post_alt(struct gspca_dev *gspca_dev) +{ + mi1320_camera_settings(gspca_dev); + + return 0; +} + +static int mi1320_sensor_settings(struct gspca_dev *gspca_dev) +{ + s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; + + ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL); + + fetch_validx(gspca_dev, tbl_sensor_settings_common, + ARRAY_SIZE(tbl_sensor_settings_common)); + + switch (reso) { + case IMAGE_1280: + fetch_validx(gspca_dev, tbl_sensor_settings_1280, + ARRAY_SIZE(tbl_sensor_settings_1280)); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 64, tbl_1280[0]); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 40, tbl_1280[1]); + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, tbl_1280[2]); + break; + + case IMAGE_800: + fetch_validx(gspca_dev, tbl_sensor_settings_800, + ARRAY_SIZE(tbl_sensor_settings_800)); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 64, tbl_800[0]); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 40, tbl_800[1]); + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, tbl_800[2]); + break; + + default: + fetch_validx(gspca_dev, tbl_sensor_settings_640, + ARRAY_SIZE(tbl_sensor_settings_640)); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 60, tbl_640[0]); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 40, tbl_640[1]); + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, tbl_640[2]); + break; + } + return 0; +} + +static int mi1320_configure_alt(struct gspca_dev *gspca_dev) +{ + s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; + + switch (reso) { + case IMAGE_640: + gspca_dev->alt = 3 + 1; + break; + + case IMAGE_800: + case IMAGE_1280: + gspca_dev->alt = 1 + 1; + break; + } + return 0; +} + +int mi1320_camera_settings(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + s32 backlight = sd->vcur.backlight; + s32 bright = sd->vcur.brightness; + s32 sharp = sd->vcur.sharpness; + s32 cntr = sd->vcur.contrast; + s32 gam = sd->vcur.gamma; + s32 hue = sd->vcur.hue; + s32 sat = sd->vcur.saturation; + s32 wbal = sd->vcur.whitebal; + s32 mirror = (((sd->vcur.mirror > 0) ^ sd->mirrorMask) > 0); + s32 flip = (((sd->vcur.flip > 0) ^ sd->mirrorMask) > 0); + s32 freq = (sd->vcur.AC50Hz > 0); + s32 i; + + if (freq != sd->vold.AC50Hz) { + sd->vold.AC50Hz = freq; + + freq = 2 * (freq == 0); + ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba02, 0x00f1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba00 , 0x005b, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba01 + freq, 0x00f1, 0, NULL); + } + + if (wbal != sd->vold.whitebal) { + sd->vold.whitebal = wbal; + if (wbal < 0 || wbal > sd->vmax.whitebal) + wbal = 0; + + for (i = 0; i < 2; i++) { + if (wbal == 0) { /* Normal light */ + ctrl_out(gspca_dev, 0x40, 1, + 0x0010, 0x0010, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, + 0x0003, 0x00c1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, + 0x0042, 0x00c2, 0, NULL); + ctrl_out(gspca_dev, 0x40, 3, + 0xba00, 0x0200, 48, dat_wbalNL); + } + + if (wbal == 1) { /* Low light */ + ctrl_out(gspca_dev, 0x40, 1, + 0x0010, 0x0010, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, + 0x0004, 0x00c1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, + 0x0043, 0x00c2, 0, NULL); + ctrl_out(gspca_dev, 0x40, 3, + 0xba00, 0x0200, 48, dat_wbalLL); + } + + if (wbal == 2) { /* Back light */ + ctrl_out(gspca_dev, 0x40, 1, + 0x0010, 0x0010, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, + 0x0003, 0x00c1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, + 0x0042, 0x00c2, 0, NULL); + ctrl_out(gspca_dev, 0x40, 3, + 0xba00, 0x0200, 44, dat_wbalBL); + } + } + } + + if (bright != sd->vold.brightness) { + sd->vold.brightness = bright; + if (bright < 0 || bright > sd->vmax.brightness) + bright = 0; + + bright = tbl_bright[bright]; + ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba00 + bright, 0x0034, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba00 + bright, 0x00f1, 0, NULL); + } + + if (sat != sd->vold.saturation) { + sd->vold.saturation = sat; + if (sat < 0 || sat > sd->vmax.saturation) + sat = 0; + + sat = tbl_sat[sat]; + ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba00 , 0x0025, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba00 + sat, 0x00f1, 0, NULL); + } + + if (sharp != sd->vold.sharpness) { + sd->vold.sharpness = sharp; + if (sharp < 0 || sharp > sd->vmax.sharpness) + sharp = 0; + + ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba00 , 0x0005, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba00 + sharp, 0x00f1, 0, NULL); + } + + if (hue != sd->vold.hue) { + /* 0=normal 1=NB 2="sepia" 3=negative 4=other 5=other2 */ + if (hue < 0 || hue > sd->vmax.hue) + hue = 0; + if (hue == sd->vmax.hue) + sd->swapRB = 1; + else + sd->swapRB = 0; + + ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba70, 0x00e2, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba00 + hue * (hue < 6), 0x00f1, + 0, NULL); + } + + if (backlight != sd->vold.backlight) { + sd->vold.backlight = backlight; + if (backlight < 0 || backlight > sd->vmax.backlight) + backlight = 0; + + backlight = tbl_backlight[backlight]; + for (i = 0; i < 2; i++) { + ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba74, 0x0006, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba80 + backlight, 0x00f1, + 0, NULL); + } + } + + if (hue != sd->vold.hue) { + sd->vold.hue = hue; + + ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba70, 0x00e2, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba00 + hue * (hue < 6), 0x00f1, + 0, NULL); + } + + if (mirror != sd->vold.mirror || flip != sd->vold.flip) { + u8 dat_hvflip2[4] = {0x20, 0x01, 0xf1, 0x00}; + sd->vold.mirror = mirror; + sd->vold.flip = flip; + + dat_hvflip2[3] = flip + 2 * mirror; + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 4, dat_hvflip1); + ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 4, dat_hvflip2); + } + + if (gam != sd->vold.gamma) { + sd->vold.gamma = gam; + if (gam < 0 || gam > sd->vmax.gamma) + gam = 0; + + gam = 2 * gam; + ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba04 , 0x003b, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba02 + gam, 0x00f1, 0, NULL); + } + + if (cntr != sd->vold.contrast) { + sd->vold.contrast = cntr; + if (cntr < 0 || cntr > sd->vmax.contrast) + cntr = 0; + + ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba00 + tbl_cntr1[cntr], 0x0035, + 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0xba00 + tbl_cntr2[cntr], 0x00f1, + 0, NULL); + } + + return 0; +} + +static void mi1320_post_unset_alt(struct gspca_dev *gspca_dev) +{ + ctrl_out(gspca_dev, 0x40, 5, 0x0000, 0x0000, 0, NULL); + + fetch_validx(gspca_dev, tbl_post_unset_alt, + ARRAY_SIZE(tbl_post_unset_alt)); +} diff --git a/drivers/media/video/gspca/gl860/gl860-mi2020.c b/drivers/media/video/gspca/gl860/gl860-mi2020.c new file mode 100644 index 00000000000..ffb09fed3e8 --- /dev/null +++ b/drivers/media/video/gspca/gl860/gl860-mi2020.c @@ -0,0 +1,937 @@ +/* @file gl860-mi2020.c + * @author Olivier LORIN, from Ice/Soro2005's logs(A), Fret_saw/Hulkie's + * logs(B) and Tricid"s logs(C). With the help of Kytrix/BUGabundo/Blazercist. + * @date 2009-08-27 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Sensor : MI2020 */ + +#include "gl860.h" + +static u8 dat_bright1[] = {0x8c, 0xa2, 0x06}; +static u8 dat_bright3[] = {0x8c, 0xa1, 0x02}; +static u8 dat_bright4[] = {0x90, 0x00, 0x0f}; +static u8 dat_bright5[] = {0x8c, 0xa1, 0x03}; +static u8 dat_bright6[] = {0x90, 0x00, 0x05}; + +static u8 dat_dummy1[] = {0x90, 0x00, 0x06}; +/*static u8 dummy2[] = {0x8c, 0xa1, 0x02};*/ +/*static u8 dummy3[] = {0x90, 0x00, 0x1f};*/ + +static u8 dat_hvflip1[] = {0x8c, 0x27, 0x19}; +static u8 dat_hvflip3[] = {0x8c, 0x27, 0x3b}; +static u8 dat_hvflip5[] = {0x8c, 0xa1, 0x03}; +static u8 dat_hvflip6[] = {0x90, 0x00, 0x06}; + +static u8 dat_freq1[] = { 0x8c, 0xa4, 0x04 }; + +static u8 dat_multi5[] = { 0x8c, 0xa1, 0x03 }; +static u8 dat_multi6[] = { 0x90, 0x00, 0x05 }; + +static struct validx tbl_common_a[] = { + {0x0000, 0x0000}, + {1, 0xffff}, /* msleep(35); */ + {0x006a, 0x0007}, {0x0063, 0x0006}, {0x006a, 0x000d}, {0x0000, 0x00c0}, + {0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042, 0x00c2}, {0x0004, 0x00d8}, + {0x0000, 0x0058}, {0x0002, 0x0004}, {0x0041, 0x0000}, +}; + +static struct validx tbl_common_b[] = { + {0x006a, 0x0007}, + {35, 0xffff}, + {0x00ef, 0x0006}, + {35, 0xffff}, + {0x006a, 0x000d}, + {35, 0xffff}, + {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042, 0x00c2}, + {0x0004, 0x00d8}, {0x0000, 0x0058}, {0x0041, 0x0000}, +}; + +static struct idxdata tbl_common_c[] = { + {0x32, "\x02\x00\x08"}, {0x33, "\xf4\x03\x1d"}, + {6, "\xff\xff\xff"}, /* 12 */ + {0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"}, + {2, "\xff\xff\xff"}, /* - */ + {0x34, "\x1e\x8f\x09"}, {0x32, "\x14\x06\xe6"}, {0x33, "\x8c\x22\x23"}, + {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa2\x0f"}, {0x33, "\x90\x00\x0d"}, + {0x33, "\x8c\xa2\x10"}, {0x33, "\x90\x00\x0b"}, {0x33, "\x8c\xa2\x11"}, + {0x33, "\x90\x00\x07"}, {0x33, "\xf4\x03\x1d"}, {0x35, "\xa2\x00\xe2"}, + {0x33, "\x8c\xab\x05"}, {0x33, "\x90\x00\x01"}, {0x32, "\x6e\x00\x86"}, + {0x32, "\x70\x0f\xaa"}, {0x32, "\x72\x0f\xe4"}, {0x33, "\x8c\xa3\x4a"}, + {0x33, "\x90\x00\x5a"}, {0x33, "\x8c\xa3\x4b"}, {0x33, "\x90\x00\xa6"}, + {0x33, "\x8c\xa3\x61"}, {0x33, "\x90\x00\xc8"}, {0x33, "\x8c\xa3\x62"}, + {0x33, "\x90\x00\xe1"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"}, + {0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"}, + {0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"}, + {0x34, "\xde\x01\x5b"}, {0x34, "\xe6\x01\x13"}, {0x34, "\xee\x0b\xf0"}, + {0x34, "\xf6\x0b\xa4"}, {0x35, "\x00\xf6\xe7"}, {0x35, "\x08\x0d\xfd"}, + {0x35, "\x10\x25\x63"}, {0x35, "\x18\x35\x6c"}, {0x35, "\x20\x42\x7e"}, + {0x35, "\x28\x19\x44"}, {0x35, "\x30\x39\xd4"}, {0x35, "\x38\xf5\xa8"}, + {0x35, "\x4c\x07\x90"}, {0x35, "\x44\x07\xb8"}, {0x35, "\x5c\x06\x88"}, + {0x35, "\x54\x07\xff"}, {0x34, "\xe0\x01\x52"}, {0x34, "\xe8\x00\xcc"}, + {0x34, "\xf0\x0d\x83"}, {0x34, "\xf8\x0c\xb3"}, {0x35, "\x02\xfe\xba"}, + {0x35, "\x0a\x04\xe0"}, {0x35, "\x12\x1c\x63"}, {0x35, "\x1a\x2b\x5a"}, + {0x35, "\x22\x32\x5e"}, {0x35, "\x2a\x0d\x28"}, {0x35, "\x32\x2c\x02"}, + {0x35, "\x3a\xf4\xfa"}, {0x35, "\x4e\x07\xef"}, {0x35, "\x46\x07\x88"}, + {0x35, "\x5e\x07\xc1"}, {0x35, "\x56\x04\x64"}, {0x34, "\xe4\x01\x15"}, + {0x34, "\xec\x00\x82"}, {0x34, "\xf4\x0c\xce"}, {0x34, "\xfc\x0c\xba"}, + {0x35, "\x06\x1f\x02"}, {0x35, "\x0e\x02\xe3"}, {0x35, "\x16\x1a\x50"}, + {0x35, "\x1e\x24\x39"}, {0x35, "\x26\x23\x4c"}, {0x35, "\x2e\xf9\x1b"}, + {0x35, "\x36\x23\x19"}, {0x35, "\x3e\x12\x08"}, {0x35, "\x52\x07\x22"}, + {0x35, "\x4a\x03\xd3"}, {0x35, "\x62\x06\x54"}, {0x35, "\x5a\x04\x5d"}, + {0x34, "\xe2\x01\x04"}, {0x34, "\xea\x00\xa0"}, {0x34, "\xf2\x0c\xbc"}, + {0x34, "\xfa\x0c\x5b"}, {0x35, "\x04\x17\xf2"}, {0x35, "\x0c\x02\x08"}, + {0x35, "\x14\x28\x43"}, {0x35, "\x1c\x28\x62"}, {0x35, "\x24\x2b\x60"}, + {0x35, "\x2c\x07\x33"}, {0x35, "\x34\x1f\xb0"}, {0x35, "\x3c\xed\xcd"}, + {0x35, "\x50\x00\x06"}, {0x35, "\x48\x07\xff"}, {0x35, "\x60\x05\x89"}, + {0x35, "\x58\x07\xff"}, {0x35, "\x40\x00\xa0"}, {0x35, "\x42\x00\x00"}, + {0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"}, {0x33, "\x90\x00\x3c"}, + {1, "\xff\xff\xff"}, + {0x33, "\x78\x00\x00"}, + {1, "\xff\xff\xff"}, + {0x35, "\xb8\x1f\x20"}, {0x33, "\x8c\xa2\x06"}, {0x33, "\x90\x00\x10"}, + {0x33, "\x8c\xa2\x07"}, {0x33, "\x90\x00\x08"}, {0x33, "\x8c\xa2\x42"}, + {0x33, "\x90\x00\x0b"}, {0x33, "\x8c\xa2\x4a"}, {0x33, "\x90\x00\x8c"}, + {0x35, "\xba\xfa\x08"}, {0x33, "\x8c\xa2\x02"}, {0x33, "\x90\x00\x22"}, + {0x33, "\x8c\xa2\x03"}, {0x33, "\x90\x00\xbb"}, +}; + +static struct idxdata tbl_common_d[] = { + {0x33, "\x8c\x22\x2e"}, {0x33, "\x90\x00\xa0"}, {0x33, "\x8c\xa4\x08"}, + {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa4\x09"}, {0x33, "\x90\x00\x21"}, + {0x33, "\x8c\xa4\x0a"}, {0x33, "\x90\x00\x25"}, {0x33, "\x8c\xa4\x0b"}, + {0x33, "\x90\x00\x27"}, {0x33, "\x8c\x24\x11"}, {0x33, "\x90\x00\xa0"}, + {0x33, "\x8c\x24\x13"}, {0x33, "\x90\x00\xc0"}, {0x33, "\x8c\x24\x15"}, + {0x33, "\x90\x00\xa0"}, {0x33, "\x8c\x24\x17"}, {0x33, "\x90\x00\xc0"}, +}; + +static struct idxdata tbl_common_e[] = { + {0x33, "\x8c\xa4\x04"}, {0x33, "\x90\x00\x80"}, {0x33, "\x8c\xa7\x9d"}, + {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa7\x9e"}, {0x33, "\x90\x00\x00"}, + {0x33, "\x8c\xa2\x0c"}, {0x33, "\x90\x00\x17"}, {0x33, "\x8c\xa2\x15"}, + {0x33, "\x90\x00\x04"}, {0x33, "\x8c\xa2\x14"}, {0x33, "\x90\x00\x20"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"}, + /* msleep(53); */ + {0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x1b"}, {0x33, "\x90\x02\x4f"}, + {0x33, "\x8c\x27\x25"}, {0x33, "\x90\x06\x0f"}, {0x33, "\x8c\x27\x39"}, + {0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"}, + {0x33, "\x8c\x27\x47"}, {0x33, "\x90\x09\x4c"}, {0x33, "\x8c\x27\x03"}, + {0x33, "\x90\x02\x84"}, {0x33, "\x8c\x27\x05"}, {0x33, "\x90\x01\xe2"}, + {0x33, "\x8c\x27\x07"}, {0x33, "\x90\x06\x40"}, {0x33, "\x8c\x27\x09"}, + {0x33, "\x90\x04\xb0"}, {0x33, "\x8c\x27\x0d"}, {0x33, "\x90\x00\x00"}, + {0x33, "\x8c\x27\x0f"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x11"}, + {0x33, "\x90\x04\xbd"}, {0x33, "\x8c\x27\x13"}, {0x33, "\x90\x06\x4d"}, + {0x33, "\x8c\x27\x15"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"}, + {0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x19"}, {0x33, "\x90\x04\x6c"}, + {0x33, "\x8c\x27\x1b"}, {0x33, "\x90\x02\x4f"}, {0x33, "\x8c\x27\x1d"}, + {0x33, "\x90\x01\x02"}, {0x33, "\x8c\x27\x1f"}, {0x33, "\x90\x02\x79"}, + {0x33, "\x8c\x27\x21"}, {0x33, "\x90\x01\x55"}, {0x33, "\x8c\x27\x23"}, + {0x33, "\x90\x02\x85"}, {0x33, "\x8c\x27\x25"}, {0x33, "\x90\x06\x0f"}, + {0x33, "\x8c\x27\x27"}, {0x33, "\x90\x20\x20"}, {0x33, "\x8c\x27\x29"}, + {0x33, "\x90\x20\x20"}, {0x33, "\x8c\x27\x2b"}, {0x33, "\x90\x10\x20"}, + {0x33, "\x8c\x27\x2d"}, {0x33, "\x90\x20\x07"}, {0x33, "\x8c\x27\x2f"}, + {0x33, "\x90\x00\x04"}, {0x33, "\x8c\x27\x31"}, {0x33, "\x90\x00\x04"}, + {0x33, "\x8c\x27\x33"}, {0x33, "\x90\x04\xbb"}, {0x33, "\x8c\x27\x35"}, + {0x33, "\x90\x06\x4b"}, {0x33, "\x8c\x27\x37"}, {0x33, "\x90\x00\x00"}, + {0x33, "\x8c\x27\x39"}, {0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x3b"}, + {0x33, "\x90\x00\x24"}, {0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"}, + {0x33, "\x8c\x27\x41"}, {0x33, "\x90\x01\x69"}, {0x33, "\x8c\x27\x45"}, + {0x33, "\x90\x04\xed"}, {0x33, "\x8c\x27\x47"}, {0x33, "\x90\x09\x4c"}, + {0x33, "\x8c\x27\x51"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x53"}, + {0x33, "\x90\x03\x20"}, {0x33, "\x8c\x27\x55"}, {0x33, "\x90\x00\x00"}, + {0x33, "\x8c\x27\x57"}, {0x33, "\x90\x02\x58"}, {0x33, "\x8c\x27\x5f"}, + {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x61"}, {0x33, "\x90\x06\x40"}, + {0x33, "\x8c\x27\x63"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x65"}, + {0x33, "\x90\x04\xb0"}, {0x33, "\x8c\x22\x2e"}, {0x33, "\x90\x00\xa1"}, + {0x33, "\x8c\xa4\x08"}, {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa4\x09"}, + {0x33, "\x90\x00\x21"}, {0x33, "\x8c\xa4\x0a"}, {0x33, "\x90\x00\x25"}, + {0x33, "\x8c\xa4\x0b"}, {0x33, "\x90\x00\x27"}, {0x33, "\x8c\x24\x11"}, + {0x33, "\x90\x00\xa1"}, {0x33, "\x8c\x24\x13"}, {0x33, "\x90\x00\xc1"}, + {0x33, "\x8c\x24\x15"}, +}; + +static struct validx tbl_init_at_startup[] = { + {0x0000, 0x0000}, + {53, 0xffff}, + {0x0010, 0x0010}, + {53, 0xffff}, + {0x0008, 0x00c0}, + {53, 0xffff}, + {0x0001, 0x00c1}, + {53, 0xffff}, + {0x0001, 0x00c2}, + {53, 0xffff}, + {0x0020, 0x0006}, + {53, 0xffff}, + {0x006a, 0x000d}, + {53, 0xffff}, +}; + +static struct idxdata tbl_init_post_alt_low_a[] = { + {0x33, "\x8c\x27\x15"}, {0x33, "\x90\x00\x25"}, {0x33, "\x8c\x22\x2e"}, + {0x33, "\x90\x00\x81"}, {0x33, "\x8c\xa4\x08"}, {0x33, "\x90\x00\x17"}, + {0x33, "\x8c\xa4\x09"}, {0x33, "\x90\x00\x1a"}, {0x33, "\x8c\xa4\x0a"}, + {0x33, "\x90\x00\x1d"}, {0x33, "\x8c\xa4\x0b"}, {0x33, "\x90\x00\x20"}, + {0x33, "\x8c\x24\x11"}, {0x33, "\x90\x00\x81"}, {0x33, "\x8c\x24\x13"}, + {0x33, "\x90\x00\x9b"}, +}; + +static struct idxdata tbl_init_post_alt_low_b[] = { + {0x33, "\x8c\x27\x03"}, {0x33, "\x90\x03\x24"}, {0x33, "\x8c\x27\x05"}, + {0x33, "\x90\x02\x58"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, + {2, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"}, + {2, "\xff\xff\xff"}, +}; + +static struct idxdata tbl_init_post_alt_low_c[] = { + {0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"}, + {2, "\xff\xff\xff"}, + {0x34, "\x1e\x8f\x09"}, {0x32, "\x14\x06\xe6"}, {0x33, "\x8c\xa1\x20"}, + {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x01"}, + {0x33, "\x2e\x01\x00"}, {0x34, "\x04\x00\x2a"}, {0x33, "\x8c\xa7\x02"}, + {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x95"}, {0x33, "\x90\x01\x00"}, + {2, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x20"}, {0x33, "\x90\x00\x72"}, {0x33, "\x8c\xa1\x03"}, + {0x33, "\x90\x00\x02"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x01"}, + {2, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x20"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa1\x03"}, + {0x33, "\x90\x00\x01"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x00"}, + {2, "\xff\xff\xff"}, /* - * */ + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, + {2, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"}, + {2, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, + {2, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"}, + {1, "\xff\xff\xff"}, +}; + +static struct idxdata tbl_init_post_alt_low_d[] = { + {0x32, "\x10\x01\xf8"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"}, + {0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"}, + {0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"}, + {0x34, "\xde\x01\x5b"}, {0x34, "\xe6\x01\x13"}, {0x34, "\xee\x0b\xf0"}, + {0x34, "\xf6\x0b\xa4"}, {0x35, "\x00\xf6\xe7"}, {0x35, "\x08\x0d\xfd"}, + {0x35, "\x10\x25\x63"}, {0x35, "\x18\x35\x6c"}, {0x35, "\x20\x42\x7e"}, + {0x35, "\x28\x19\x44"}, {0x35, "\x30\x39\xd4"}, {0x35, "\x38\xf5\xa8"}, + {0x35, "\x4c\x07\x90"}, {0x35, "\x44\x07\xb8"}, {0x35, "\x5c\x06\x88"}, + {0x35, "\x54\x07\xff"}, {0x34, "\xe0\x01\x52"}, {0x34, "\xe8\x00\xcc"}, + {0x34, "\xf0\x0d\x83"}, {0x34, "\xf8\x0c\xb3"}, {0x35, "\x02\xfe\xba"}, + {0x35, "\x0a\x04\xe0"}, {0x35, "\x12\x1c\x63"}, {0x35, "\x1a\x2b\x5a"}, + {0x35, "\x22\x32\x5e"}, {0x35, "\x2a\x0d\x28"}, {0x35, "\x32\x2c\x02"}, + {0x35, "\x3a\xf4\xfa"}, {0x35, "\x4e\x07\xef"}, {0x35, "\x46\x07\x88"}, + {0x35, "\x5e\x07\xc1"}, {0x35, "\x56\x04\x64"}, {0x34, "\xe4\x01\x15"}, + {0x34, "\xec\x00\x82"}, {0x34, "\xf4\x0c\xce"}, {0x34, "\xfc\x0c\xba"}, + {0x35, "\x06\x1f\x02"}, {0x35, "\x0e\x02\xe3"}, {0x35, "\x16\x1a\x50"}, + {0x35, "\x1e\x24\x39"}, {0x35, "\x26\x23\x4c"}, {0x35, "\x2e\xf9\x1b"}, + {0x35, "\x36\x23\x19"}, {0x35, "\x3e\x12\x08"}, {0x35, "\x52\x07\x22"}, + {0x35, "\x4a\x03\xd3"}, {0x35, "\x62\x06\x54"}, {0x35, "\x5a\x04\x5d"}, + {0x34, "\xe2\x01\x04"}, {0x34, "\xea\x00\xa0"}, {0x34, "\xf2\x0c\xbc"}, + {0x34, "\xfa\x0c\x5b"}, {0x35, "\x04\x17\xf2"}, {0x35, "\x0c\x02\x08"}, + {0x35, "\x14\x28\x43"}, {0x35, "\x1c\x28\x62"}, {0x35, "\x24\x2b\x60"}, + {0x35, "\x2c\x07\x33"}, {0x35, "\x34\x1f\xb0"}, {0x35, "\x3c\xed\xcd"}, + {0x35, "\x50\x00\x06"}, {0x35, "\x48\x07\xff"}, {0x35, "\x60\x05\x89"}, + {0x35, "\x58\x07\xff"}, {0x35, "\x40\x00\xa0"}, {0x35, "\x42\x00\x00"}, + {0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"}, + /* Flip/Mirror h/v=1 */ + {0x33, "\x90\x00\x3c"}, {0x33, "\x8c\x27\x19"}, {0x33, "\x90\x04\x6c"}, + {0x33, "\x8c\x27\x3b"}, {0x33, "\x90\x00\x24"}, {0x33, "\x8c\xa1\x03"}, + {0x33, "\x90\x00\x06"}, + {130, "\xff\xff\xff"}, + {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, + {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, + {100, "\xff\xff\xff"}, + /* ?? */ + {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa1\x02"}, + {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, + {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, + /* Brigthness=70 */ + {0x33, "\x8c\xa2\x06"}, {0x33, "\x90\x00\x46"}, {0x33, "\x8c\xa1\x02"}, + {0x33, "\x90\x00\x0f"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, + /* Sharpness=20 */ + {0x32, "\x6c\x14\x08"}, +}; + +static struct idxdata tbl_init_post_alt_big_a[] = { + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, + {2, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"}, + {2, "\xff\xff\xff"}, + {0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"}, + {0x34, "\x1e\x8f\x09"}, {0x32, "\x14\x06\xe6"}, {0x33, "\x8c\xa1\x03"}, + {0x33, "\x90\x00\x05"}, + {2, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"}, + {2, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, + {2, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"}, {0x33, "\x8c\xa1\x20"}, + {0x33, "\x90\x00\x72"}, {0x33, "\x8c\xa1\x30"}, {0x33, "\x90\x00\x03"}, + {0x33, "\x8c\xa1\x31"}, {0x33, "\x90\x00\x02"}, {0x33, "\x8c\xa1\x32"}, + {0x33, "\x90\x00\x03"}, {0x33, "\x8c\xa1\x34"}, {0x33, "\x90\x00\x03"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x02"}, {0x33, "\x2e\x01\x00"}, + {0x34, "\x04\x00\x2a"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x01"}, +}; + +static struct idxdata tbl_init_post_alt_big_b[] = { + {0x32, "\x10\x01\xf8"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"}, + {0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"}, + {0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"}, + {0x34, "\xde\x01\x5b"}, {0x34, "\xe6\x01\x13"}, {0x34, "\xee\x0b\xf0"}, + {0x34, "\xf6\x0b\xa4"}, {0x35, "\x00\xf6\xe7"}, {0x35, "\x08\x0d\xfd"}, + {0x35, "\x10\x25\x63"}, {0x35, "\x18\x35\x6c"}, {0x35, "\x20\x42\x7e"}, + {0x35, "\x28\x19\x44"}, {0x35, "\x30\x39\xd4"}, {0x35, "\x38\xf5\xa8"}, + {0x35, "\x4c\x07\x90"}, {0x35, "\x44\x07\xb8"}, {0x35, "\x5c\x06\x88"}, + {0x35, "\x54\x07\xff"}, {0x34, "\xe0\x01\x52"}, {0x34, "\xe8\x00\xcc"}, + {0x34, "\xf0\x0d\x83"}, {0x34, "\xf8\x0c\xb3"}, {0x35, "\x02\xfe\xba"}, + {0x35, "\x0a\x04\xe0"}, {0x35, "\x12\x1c\x63"}, {0x35, "\x1a\x2b\x5a"}, + {0x35, "\x22\x32\x5e"}, {0x35, "\x2a\x0d\x28"}, {0x35, "\x32\x2c\x02"}, + {0x35, "\x3a\xf4\xfa"}, {0x35, "\x4e\x07\xef"}, {0x35, "\x46\x07\x88"}, + {0x35, "\x5e\x07\xc1"}, {0x35, "\x56\x04\x64"}, {0x34, "\xe4\x01\x15"}, + {0x34, "\xec\x00\x82"}, {0x34, "\xf4\x0c\xce"}, {0x34, "\xfc\x0c\xba"}, + {0x35, "\x06\x1f\x02"}, {0x35, "\x0e\x02\xe3"}, {0x35, "\x16\x1a\x50"}, + {0x35, "\x1e\x24\x39"}, {0x35, "\x26\x23\x4c"}, {0x35, "\x2e\xf9\x1b"}, + {0x35, "\x36\x23\x19"}, {0x35, "\x3e\x12\x08"}, {0x35, "\x52\x07\x22"}, + {0x35, "\x4a\x03\xd3"}, {0x35, "\x62\x06\x54"}, {0x35, "\x5a\x04\x5d"}, + {0x34, "\xe2\x01\x04"}, {0x34, "\xea\x00\xa0"}, {0x34, "\xf2\x0c\xbc"}, + {0x34, "\xfa\x0c\x5b"}, {0x35, "\x04\x17\xf2"}, {0x35, "\x0c\x02\x08"}, + {0x35, "\x14\x28\x43"}, {0x35, "\x1c\x28\x62"}, {0x35, "\x24\x2b\x60"}, + {0x35, "\x2c\x07\x33"}, {0x35, "\x34\x1f\xb0"}, {0x35, "\x3c\xed\xcd"}, + {0x35, "\x50\x00\x06"}, {0x35, "\x48\x07\xff"}, {0x35, "\x60\x05\x89"}, + {0x35, "\x58\x07\xff"}, {0x35, "\x40\x00\xa0"}, {0x35, "\x42\x00\x00"}, + {0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"}, {0x33, "\x90\x00\x3c"}, +}; + +static struct idxdata tbl_init_post_alt_big_c[] = { + {0x33, "\x8c\xa1\x02"}, + {0x33, "\x90\x00\x1f"}, + {0x33, "\x8c\xa1\x02"}, + {0x33, "\x90\x00\x1f"}, + {0x33, "\x8c\xa1\x02"}, + {0x33, "\x90\x00\x1f"}, + {0x33, "\x8c\xa1\x02"}, + {0x33, "\x90\x00\x1f"}, +}; + +static u8 *dat_640 = "\xd0\x02\xd1\x08\xd2\xe1\xd3\x02\xd4\x10\xd5\x81"; +static u8 *dat_800 = "\xd0\x02\xd1\x10\xd2\x57\xd3\x02\xd4\x18\xd5\x21"; +static u8 *dat_1280 = "\xd0\x02\xd1\x20\xd2\x01\xd3\x02\xd4\x28\xd5\x01"; +static u8 *dat_1600 = "\xd0\x02\xd1\x20\xd2\xaf\xd3\x02\xd4\x30\xd5\x41"; + +static int mi2020_init_at_startup(struct gspca_dev *gspca_dev); +static int mi2020_configure_alt(struct gspca_dev *gspca_dev); +static int mi2020_init_pre_alt(struct gspca_dev *gspca_dev); +static int mi2020_init_post_alt(struct gspca_dev *gspca_dev); +static void mi2020_post_unset_alt(struct gspca_dev *gspca_dev); +static int mi2020_camera_settings(struct gspca_dev *gspca_dev); +/*==========================================================================*/ + +void mi2020_init_settings(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vcur.backlight = 0; + sd->vcur.brightness = 70; + sd->vcur.sharpness = 20; + sd->vcur.contrast = 0; + sd->vcur.gamma = 0; + sd->vcur.hue = 0; + sd->vcur.saturation = 60; + sd->vcur.whitebal = 50; + sd->vcur.mirror = 0; + sd->vcur.flip = 0; + sd->vcur.AC50Hz = 1; + + sd->vmax.backlight = 64; + sd->vmax.brightness = 128; + sd->vmax.sharpness = 40; + sd->vmax.contrast = 3; + sd->vmax.gamma = 2; + sd->vmax.hue = 0 + 1; /* 200 */ + sd->vmax.saturation = 0; /* 100 */ + sd->vmax.whitebal = 0; /* 100 */ + sd->vmax.mirror = 1; + sd->vmax.flip = 1; + sd->vmax.AC50Hz = 1; + if (_MI2020b_) { + sd->vmax.contrast = 0; + sd->vmax.gamma = 0; + sd->vmax.backlight = 0; + } + + sd->dev_camera_settings = mi2020_camera_settings; + sd->dev_init_at_startup = mi2020_init_at_startup; + sd->dev_configure_alt = mi2020_configure_alt; + sd->dev_init_pre_alt = mi2020_init_pre_alt; + sd->dev_post_unset_alt = mi2020_post_unset_alt; +} + +/*==========================================================================*/ + +static void common(struct gspca_dev *gspca_dev) +{ + s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; + + if (_MI2020b_) { + fetch_validx(gspca_dev, tbl_common_a, ARRAY_SIZE(tbl_common_a)); + } else { + if (_MI2020_) + ctrl_out(gspca_dev, 0x40, 1, 0x0008, 0x0004, 0, NULL); + else + ctrl_out(gspca_dev, 0x40, 1, 0x0002, 0x0004, 0, NULL); + msleep(35); + fetch_validx(gspca_dev, tbl_common_b, ARRAY_SIZE(tbl_common_b)); + } + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x86\x25\x01"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x86\x25\x00"); + msleep(2); /* - * */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0030, 3, "\x1a\x0a\xcc"); + if (reso == IMAGE_1600) + msleep(2); /* 1600 */ + fetch_idxdata(gspca_dev, tbl_common_c, ARRAY_SIZE(tbl_common_c)); + + if (_MI2020b_ || _MI2020_) + fetch_idxdata(gspca_dev, tbl_common_d, + ARRAY_SIZE(tbl_common_d)); + + fetch_idxdata(gspca_dev, tbl_common_e, ARRAY_SIZE(tbl_common_e)); + if (_MI2020b_ || _MI2020_) { + /* Different from fret */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x78"); + /* Same as fret */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x24\x17"); + /* Different from fret */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x90"); + } else { + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x6a"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x24\x17"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x80"); + } + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x05"); + msleep(2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); + if (reso == IMAGE_1600) + msleep(14); /* 1600 */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x06"); + msleep(2); +} + +static int mi2020_init_at_startup(struct gspca_dev *gspca_dev) +{ + u8 c; + + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0004, 1, &c); + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0004, 1, &c); + + fetch_validx(gspca_dev, tbl_init_at_startup, + ARRAY_SIZE(tbl_init_at_startup)); + + common(gspca_dev); + + return 0; +} + +static int mi2020_init_pre_alt(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->mirrorMask = 0; + + sd->vold.backlight = -1; + sd->vold.brightness = -1; + sd->vold.sharpness = -1; + sd->vold.contrast = -1; + sd->vold.gamma = -1; + sd->vold.hue = -1; + sd->vold.mirror = -1; + sd->vold.flip = -1; + sd->vold.AC50Hz = -1; + + mi2020_init_post_alt(gspca_dev); + + return 0; +} + +static int mi2020_init_post_alt(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; + + s32 backlight = sd->vcur.backlight; + s32 mirror = (((sd->vcur.mirror > 0) ^ sd->mirrorMask) > 0); + s32 flip = (((sd->vcur.flip > 0) ^ sd->mirrorMask) > 0); + s32 freq = (sd->vcur.AC50Hz > 0); + + u8 dat_freq2[] = {0x90, 0x00, 0x80}; + u8 dat_multi1[] = {0x8c, 0xa7, 0x00}; + u8 dat_multi2[] = {0x90, 0x00, 0x00}; + u8 dat_multi3[] = {0x8c, 0xa7, 0x00}; + u8 dat_multi4[] = {0x90, 0x00, 0x00}; + u8 dat_hvflip2[] = {0x90, 0x04, 0x6c}; + u8 dat_hvflip4[] = {0x90, 0x00, 0x24}; + u8 c; + + sd->nbIm = -1; + + dat_freq2[2] = freq ? 0xc0 : 0x80; + dat_multi1[2] = 0x9d; + dat_multi3[2] = dat_multi1[2] + 1; + dat_multi4[2] = dat_multi2[2] = backlight; + dat_hvflip2[2] = 0x6c + 2 * (1 - flip) + (1 - mirror); + dat_hvflip4[2] = 0x24 + 2 * (1 - flip) + (1 - mirror); + + msleep(200); + + ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL); + msleep(3); /* 35 * */ + + common(gspca_dev); + + ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x0000, 0, NULL); + msleep(70); + + if (_MI2020b_) + ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL); + + ctrl_out(gspca_dev, 0x40, 1, 0x0010, 0x0010, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0003, 0x00c1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0042, 0x00c2, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x006a, 0x000d, 0, NULL); + + switch (reso) { + case IMAGE_640: + case IMAGE_800: + if (reso != IMAGE_800) + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, + 12, dat_640); + else + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, + 12, dat_800); + + if (_MI2020c_) + fetch_idxdata(gspca_dev, tbl_init_post_alt_low_a, + ARRAY_SIZE(tbl_init_post_alt_low_a)); + + if (reso == IMAGE_800) + fetch_idxdata(gspca_dev, tbl_init_post_alt_low_b, + ARRAY_SIZE(tbl_init_post_alt_low_b)); + + fetch_idxdata(gspca_dev, tbl_init_post_alt_low_c, + ARRAY_SIZE(tbl_init_post_alt_low_c)); + + if (_MI2020b_) { + ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); + msleep(150); + } else if (_MI2020c_) { + ctrl_out(gspca_dev, 0x40, 1, 0x0010, 0x0010, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); + msleep(120); + ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL); + msleep(30); + } else if (_MI2020_) { + ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); + msleep(120); + ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL); + msleep(30); + } + + /* AC power frequency */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2); + msleep(20); + /* backlight */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4); + /* at init time but not after */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa2\x0c"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x17"); + /* finish the backlight */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); + msleep(5);/* " */ + + if (_MI2020c_) { + fetch_idxdata(gspca_dev, tbl_init_post_alt_low_d, + ARRAY_SIZE(tbl_init_post_alt_low_d)); + } else { + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, &c); + msleep(14); /* 0xd8 */ + + /* flip/mirror */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_hvflip1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_hvflip2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_hvflip3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_hvflip4); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_hvflip5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_hvflip6); + msleep(21); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_dummy1); + msleep(5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_dummy1); + msleep(5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_dummy1); + msleep(5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_dummy1); + msleep(5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_dummy1); + msleep(5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, dat_dummy1); + /* end of flip/mirror main part */ + msleep(246); /* 146 */ + + sd->nbIm = 0; + } + break; + + case IMAGE_1280: + case IMAGE_1600: + if (reso == IMAGE_1280) { + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, + 12, dat_1280); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, "\x8c\x27\x07"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, "\x90\x05\x04"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, "\x8c\x27\x09"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, "\x90\x04\x02"); + } else { + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, + 12, dat_1600); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, "\x8c\x27\x07"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, "\x90\x06\x40"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, "\x8c\x27\x09"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, + 3, "\x90\x04\xb0"); + } + + fetch_idxdata(gspca_dev, tbl_init_post_alt_big_a, + ARRAY_SIZE(tbl_init_post_alt_big_a)); + + if (reso == IMAGE_1600) + msleep(13); /* 1600 */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x27\x97"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x01\x00"); + msleep(53); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01"); + if (reso == IMAGE_1600) + msleep(13); /* 1600 */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00"); + msleep(53); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x72"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x02"); + if (reso == IMAGE_1600) + msleep(13); /* 1600 */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01"); + msleep(53); + + if (_MI2020b_) { + ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL); + if (reso == IMAGE_1600) + msleep(500); /* 1600 */ + ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); + msleep(1850); + } else if (_MI2020c_ || _MI2020_) { + ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); + msleep(1850); + ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL); + msleep(30); + } + + /* AC power frequency */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2); + msleep(20); + /* backlight */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4); + /* at init time but not after */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa2\x0c"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x17"); + /* finish the backlight */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); + msleep(6); /* " */ + + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, &c); + msleep(14); + + if (_MI2020c_) + fetch_idxdata(gspca_dev, tbl_init_post_alt_big_b, + ARRAY_SIZE(tbl_init_post_alt_big_b)); + + /* flip/mirror */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip4); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip6); + /* end of flip/mirror main part */ + msleep(16); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00"); + if (reso == IMAGE_1600) + msleep(25); /* 1600 */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00"); + msleep(103); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x02"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x72"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02"); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01"); + sd->nbIm = 0; + + if (_MI2020c_) + fetch_idxdata(gspca_dev, tbl_init_post_alt_big_c, + ARRAY_SIZE(tbl_init_post_alt_big_c)); + } + + sd->vold.mirror = mirror; + sd->vold.flip = flip; + sd->vold.AC50Hz = freq; + sd->vold.backlight = backlight; + + mi2020_camera_settings(gspca_dev); + + return 0; +} + +static int mi2020_configure_alt(struct gspca_dev *gspca_dev) +{ + s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; + + switch (reso) { + case IMAGE_640: + gspca_dev->alt = 3 + 1; + break; + + case IMAGE_800: + case IMAGE_1280: + case IMAGE_1600: + gspca_dev->alt = 1 + 1; + break; + } + return 0; +} + +int mi2020_camera_settings(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + s32 backlight = sd->vcur.backlight; + s32 bright = sd->vcur.brightness; + s32 sharp = sd->vcur.sharpness; + s32 cntr = sd->vcur.contrast; + s32 gam = sd->vcur.gamma; + s32 hue = (sd->vcur.hue > 0); + s32 mirror = (((sd->vcur.mirror > 0) ^ sd->mirrorMask) > 0); + s32 flip = (((sd->vcur.flip > 0) ^ sd->mirrorMask) > 0); + s32 freq = (sd->vcur.AC50Hz > 0); + + u8 dat_sharp[] = {0x6c, 0x00, 0x08}; + u8 dat_bright2[] = {0x90, 0x00, 0x00}; + u8 dat_freq2[] = {0x90, 0x00, 0x80}; + u8 dat_multi1[] = {0x8c, 0xa7, 0x00}; + u8 dat_multi2[] = {0x90, 0x00, 0x00}; + u8 dat_multi3[] = {0x8c, 0xa7, 0x00}; + u8 dat_multi4[] = {0x90, 0x00, 0x00}; + u8 dat_hvflip2[] = {0x90, 0x04, 0x6c}; + u8 dat_hvflip4[] = {0x90, 0x00, 0x24}; + + /* Less than 4 images received -> too early to set the settings */ + if (sd->nbIm < 4) { + sd->waitSet = 1; + return 0; + } + sd->waitSet = 0; + + if (freq != sd->vold.AC50Hz) { + sd->vold.AC50Hz = freq; + + dat_freq2[2] = freq ? 0xc0 : 0x80; + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2); + msleep(20); + } + + if (mirror != sd->vold.mirror || flip != sd->vold.flip) { + sd->vold.mirror = mirror; + sd->vold.flip = flip; + + dat_hvflip2[2] = 0x6c + 2 * (1 - flip) + (1 - mirror); + dat_hvflip4[2] = 0x24 + 2 * (1 - flip) + (1 - mirror); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip4); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip6); + msleep(130); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); + msleep(6); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); + msleep(6); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); + msleep(6); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); + msleep(6); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); + msleep(6); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); + msleep(6); + + /* Sometimes present, sometimes not, useful? */ + /* ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2); + * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3); + * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2); + * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3); + * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2); + * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3); + * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2); + * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3);*/ + } + + if (backlight != sd->vold.backlight) { + sd->vold.backlight = backlight; + if (backlight < 0 || backlight > sd->vmax.backlight) + backlight = 0; + + dat_multi1[2] = 0x9d; + dat_multi3[2] = dat_multi1[2] + 1; + dat_multi4[2] = dat_multi2[2] = backlight; + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); + } + + if (gam != sd->vold.gamma) { + sd->vold.gamma = gam; + if (gam < 0 || gam > sd->vmax.gamma) + gam = 0; + + dat_multi1[2] = 0x6d; + dat_multi3[2] = dat_multi1[2] + 1; + dat_multi4[2] = dat_multi2[2] = 0x40 + gam; + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); + } + + if (cntr != sd->vold.contrast) { + sd->vold.contrast = cntr; + if (cntr < 0 || cntr > sd->vmax.contrast) + cntr = 0; + + dat_multi1[2] = 0x6d; + dat_multi3[2] = dat_multi1[2] + 1; + dat_multi4[2] = dat_multi2[2] = 0x12 + 16 * cntr; + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); + } + + if (bright != sd->vold.brightness) { + sd->vold.brightness = bright; + if (bright < 0 || bright > sd->vmax.brightness) + bright = 0; + + dat_bright2[2] = bright; + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright4); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright6); + } + + if (sharp != sd->vold.sharpness) { + sd->vold.sharpness = sharp; + if (sharp < 0 || sharp > sd->vmax.sharpness) + sharp = 0; + + dat_sharp[1] = sharp; + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0032, 3, dat_sharp); + } + + if (hue != sd->vold.hue) { + sd->swapRB = hue; + sd->vold.hue = hue; + } + + return 0; +} + +static void mi2020_post_unset_alt(struct gspca_dev *gspca_dev) +{ + ctrl_out(gspca_dev, 0x40, 5, 0x0000, 0x0000, 0, NULL); + msleep(20); + if (_MI2020c_ || _MI2020_) + ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0000, 0, NULL); + else + ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x0000, 0, NULL); +} diff --git a/drivers/media/video/gspca/gl860/gl860-ov2640.c b/drivers/media/video/gspca/gl860/gl860-ov2640.c new file mode 100644 index 00000000000..14b9c373f9f --- /dev/null +++ b/drivers/media/video/gspca/gl860/gl860-ov2640.c @@ -0,0 +1,505 @@ +/* @file gl860-ov2640.c + * @author Olivier LORIN, from Malmostoso's logs + * @date 2009-08-27 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Sensor : OV2640 */ + +#include "gl860.h" + +static u8 dat_init1[] = "\x00\x41\x07\x6a\x06\x61\x0d\x6a" "\x10\x10\xc1\x01"; +static u8 dat_init2[] = {0x61}; /* expected */ +static u8 dat_init3[] = {0x51}; /* expected */ + +static u8 dat_post[] = + "\x00\x41\x07\x6a\x06\xef\x0d\x6a" "\x10\x10\xc1\x01"; + +static u8 dat_640[] = "\xd0\x01\xd1\x08\xd2\xe0\xd3\x02\xd4\x10\xd5\x81"; +static u8 dat_800[] = "\xd0\x01\xd1\x10\xd2\x58\xd3\x02\xd4\x18\xd5\x21"; +static u8 dat_1280[] = "\xd0\x01\xd1\x18\xd2\xc0\xd3\x02\xd4\x28\xd5\x01"; +static u8 dat_1600[] = "\xd0\x01\xd1\x20\xd2\xb0\xd3\x02\xd4\x30\xd5\x41"; + +static u8 c50[] = {0x50}; /* expected */ +static u8 c28[] = {0x28}; /* expected */ +static u8 ca8[] = {0xa8}; /* expected */ + +static struct validx tbl_init_at_startup[] = { + {0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001, 0x00c1}, + {0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d}, + {0x0050, 0x0000}, {0x0041, 0x0000}, {0x006a, 0x0007}, {0x0061, 0x0006}, + {0x006a, 0x000d}, {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1}, + {0x0041, 0x00c2}, {0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058}, + {0x0041, 0x0000}, {0x0061, 0x0000}, +}; + +static struct validx tbl_common[] = { + {0x6000, 0x00ff}, {0x60ff, 0x002c}, {0x60df, 0x002e}, {0x6001, 0x00ff}, + {0x6080, 0x0012}, {0x6000, 0x0000}, {0x6000, 0x0045}, {0x6000, 0x0010}, + {0x6035, 0x003c}, {0x6000, 0x0011}, {0x6028, 0x0004}, {0x60e5, 0x0013}, + {0x6088, 0x0014}, {0x600c, 0x002c}, {0x6078, 0x0033}, {0x60f7, 0x003b}, + {0x6000, 0x003e}, {0x6011, 0x0043}, {0x6010, 0x0016}, {0x6082, 0x0039}, + {0x6088, 0x0035}, {0x600a, 0x0022}, {0x6040, 0x0037}, {0x6000, 0x0023}, + {0x60a0, 0x0034}, {0x601a, 0x0036}, {0x6002, 0x0006}, {0x60c0, 0x0007}, + {0x60b7, 0x000d}, {0x6001, 0x000e}, {0x6000, 0x004c}, {0x6081, 0x004a}, + {0x6099, 0x0021}, {0x6002, 0x0009}, {0x603e, 0x0024}, {0x6034, 0x0025}, + {0x6081, 0x0026}, {0x6000, 0x0000}, {0x6000, 0x0045}, {0x6000, 0x0010}, + {0x6000, 0x005c}, {0x6000, 0x0063}, {0x6000, 0x007c}, {0x6070, 0x0061}, + {0x6080, 0x0062}, {0x6080, 0x0020}, {0x6030, 0x0028}, {0x6000, 0x006c}, + {0x6000, 0x006e}, {0x6002, 0x0070}, {0x6094, 0x0071}, {0x60c1, 0x0073}, + {0x6034, 0x003d}, {0x6057, 0x005a}, {0x60bb, 0x004f}, {0x609c, 0x0050}, + {0x6080, 0x006d}, {0x6002, 0x0039}, {0x6033, 0x003a}, {0x60f1, 0x003b}, + {0x6031, 0x003c}, {0x6000, 0x00ff}, {0x6014, 0x00e0}, {0x60ff, 0x0076}, + {0x60a0, 0x0033}, {0x6020, 0x0042}, {0x6018, 0x0043}, {0x6000, 0x004c}, + {0x60d0, 0x0087}, {0x600f, 0x0088}, {0x6003, 0x00d7}, {0x6010, 0x00d9}, + {0x6005, 0x00da}, {0x6082, 0x00d3}, {0x60c0, 0x00f9}, {0x6006, 0x0044}, + {0x6007, 0x00d1}, {0x6002, 0x00d2}, {0x6000, 0x00d2}, {0x6011, 0x00d8}, + {0x6008, 0x00c8}, {0x6080, 0x00c9}, {0x6008, 0x007c}, {0x6020, 0x007d}, + {0x6020, 0x007d}, {0x6000, 0x0090}, {0x600e, 0x0091}, {0x601a, 0x0091}, + {0x6031, 0x0091}, {0x605a, 0x0091}, {0x6069, 0x0091}, {0x6075, 0x0091}, + {0x607e, 0x0091}, {0x6088, 0x0091}, {0x608f, 0x0091}, {0x6096, 0x0091}, + {0x60a3, 0x0091}, {0x60af, 0x0091}, {0x60c4, 0x0091}, {0x60d7, 0x0091}, + {0x60e8, 0x0091}, {0x6020, 0x0091}, {0x6000, 0x0092}, {0x6006, 0x0093}, + {0x60e3, 0x0093}, {0x6005, 0x0093}, {0x6005, 0x0093}, {0x6000, 0x0093}, + {0x6004, 0x0093}, {0x6000, 0x0093}, {0x6000, 0x0093}, {0x6000, 0x0093}, + {0x6000, 0x0093}, {0x6000, 0x0093}, {0x6000, 0x0093}, {0x6000, 0x0093}, + {0x6000, 0x0096}, {0x6008, 0x0097}, {0x6019, 0x0097}, {0x6002, 0x0097}, + {0x600c, 0x0097}, {0x6024, 0x0097}, {0x6030, 0x0097}, {0x6028, 0x0097}, + {0x6026, 0x0097}, {0x6002, 0x0097}, {0x6098, 0x0097}, {0x6080, 0x0097}, + {0x6000, 0x0097}, {0x6000, 0x0097}, {0x60ed, 0x00c3}, {0x609a, 0x00c4}, + {0x6000, 0x00a4}, {0x6011, 0x00c5}, {0x6051, 0x00c6}, {0x6010, 0x00c7}, + {0x6066, 0x00b6}, {0x60a5, 0x00b8}, {0x6064, 0x00b7}, {0x607c, 0x00b9}, + {0x60af, 0x00b3}, {0x6097, 0x00b4}, {0x60ff, 0x00b5}, {0x60c5, 0x00b0}, + {0x6094, 0x00b1}, {0x600f, 0x00b2}, {0x605c, 0x00c4}, {0x6000, 0x00a8}, + {0x60c8, 0x00c0}, {0x6096, 0x00c1}, {0x601d, 0x0086}, {0x6000, 0x0050}, + {0x6090, 0x0051}, {0x6018, 0x0052}, {0x6000, 0x0053}, {0x6000, 0x0054}, + {0x6088, 0x0055}, {0x6000, 0x0057}, {0x6090, 0x005a}, {0x6018, 0x005b}, + {0x6005, 0x005c}, {0x60ed, 0x00c3}, {0x6000, 0x007f}, {0x6005, 0x00da}, + {0x601f, 0x00e5}, {0x6067, 0x00e1}, {0x6000, 0x00e0}, {0x60ff, 0x00dd}, + {0x6000, 0x0005}, {0x6001, 0x00ff}, {0x6000, 0x0000}, {0x6000, 0x0045}, + {0x6000, 0x0010}, +}; + +static struct validx tbl_sensor_settings_common_a[] = { + {0x0041, 0x0000}, {0x006a, 0x0007}, {0x00ef, 0x0006}, {0x006a, 0x000d}, + {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1}, {0x0041, 0x00c2}, + {0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058}, {0x0041, 0x0000}, + {50, 0xffff}, + {0x0061, 0x0000}, + {0xffff, 0xffff}, + {0x6000, 0x00ff}, {0x6000, 0x007c}, {0x6007, 0x007d}, + {30, 0xffff}, + {0x0040, 0x0000}, +}; + +static struct validx tbl_sensor_settings_common_b[] = { + {0x6001, 0x00ff}, {0x6038, 0x000c}, + {10, 0xffff}, + {0x6000, 0x0011}, + /* backlight=31/64 */ + {0x6001, 0x00ff}, {0x603e, 0x0024}, {0x6034, 0x0025}, + /* bright=0/256 */ + {0x6000, 0x00ff}, {0x6009, 0x007c}, {0x6000, 0x007d}, + /* wbal=64/128 */ + {0x6000, 0x00ff}, {0x6003, 0x007c}, {0x6040, 0x007d}, + /* cntr=0/256 */ + {0x6000, 0x00ff}, {0x6007, 0x007c}, {0x6000, 0x007d}, + /* sat=128/256 */ + {0x6000, 0x00ff}, {0x6001, 0x007c}, {0x6080, 0x007d}, + /* sharpness=0/32 */ + {0x6000, 0x00ff}, {0x6001, 0x0092}, {0x60c0, 0x0093}, + /* hue=0/256 */ + {0x6000, 0x00ff}, {0x6002, 0x007c}, {0x6000, 0x007d}, + /* gam=32/64 */ + {0x6000, 0x00ff}, {0x6008, 0x007c}, {0x6020, 0x007d}, + /* image right up */ + {0xffff, 0xffff}, + {15, 0xffff}, + {0x6001, 0x00ff}, {0x6000, 0x8004}, + {0xffff, 0xffff}, + {0x60a8, 0x0004}, + {15, 0xffff}, + {0x6001, 0x00ff}, {0x6000, 0x8004}, + {0xffff, 0xffff}, + {0x60f8, 0x0004}, + /* image right up */ + {0xffff, 0xffff}, + /* backlight=31/64 */ + {0x6001, 0x00ff}, {0x603e, 0x0024}, {0x6034, 0x0025}, +}; + +static struct validx tbl_640[] = { + {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0}, {0x6067, 0x00e1}, + {0x6004, 0x00da}, {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0}, + {0x6001, 0x00ff}, {0x6000, 0x0012}, {0x6000, 0x0011}, {0x6011, 0x0017}, + {0x6075, 0x0018}, {0x6001, 0x0019}, {0x6097, 0x001a}, {0x6036, 0x0032}, + {0x60bb, 0x004f}, {0x6057, 0x005a}, {0x609c, 0x0050}, {0x6080, 0x006d}, + {0x6092, 0x0026}, {0x60ff, 0x0020}, {0x6000, 0x0027}, {0x6000, 0x00ff}, + {0x60c8, 0x00c0}, {0x6096, 0x00c1}, {0x6000, 0x008c}, {0x603d, 0x0086}, + {0x6089, 0x0050}, {0x6090, 0x0051}, {0x602c, 0x0052}, {0x6000, 0x0053}, + {0x6000, 0x0054}, {0x6088, 0x0055}, {0x6000, 0x0057}, {0x60a0, 0x005a}, + {0x6078, 0x005b}, {0x6000, 0x005c}, {0x6004, 0x00d3}, {0x6000, 0x00e0}, + {0x60ff, 0x00dd}, {0x60a1, 0x005a}, +}; + +static struct validx tbl_800[] = { + {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0}, {0x6067, 0x00e1}, + {0x6004, 0x00da}, {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0}, + {0x6001, 0x00ff}, {0x6040, 0x0012}, {0x6000, 0x0011}, {0x6011, 0x0017}, + {0x6043, 0x0018}, {0x6000, 0x0019}, {0x604b, 0x001a}, {0x6009, 0x0032}, + {0x60ca, 0x004f}, {0x60a8, 0x0050}, {0x6000, 0x006d}, {0x6038, 0x003d}, + {0x60c8, 0x0035}, {0x6000, 0x0022}, {0x6092, 0x0026}, {0x60ff, 0x0020}, + {0x6000, 0x0027}, {0x6000, 0x00ff}, {0x6064, 0x00c0}, {0x604b, 0x00c1}, + {0x6000, 0x008c}, {0x601d, 0x0086}, {0x6082, 0x00d3}, {0x6000, 0x00e0}, + {0x60ff, 0x00dd}, {0x6020, 0x008c}, {0x6001, 0x00ff}, {0x6044, 0x0018}, +}; + +static struct validx tbl_big_a[] = { + {0x0002, 0x00c1}, {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0}, + {0x6001, 0x00ff}, {0x6000, 0x0012}, {0x6000, 0x0000}, {0x6000, 0x0045}, + {0x6000, 0x0010}, {0x6000, 0x0011}, {0x6011, 0x0017}, {0x6075, 0x0018}, + {0x6001, 0x0019}, {0x6097, 0x001a}, {0x6036, 0x0032}, {0x60bb, 0x004f}, + {0x609c, 0x0050}, {0x6057, 0x005a}, {0x6080, 0x006d}, {0x6043, 0x000f}, + {0x608f, 0x0003}, {0x6005, 0x007c}, {0x6081, 0x0026}, {0x6000, 0x00ff}, + {0x60c8, 0x00c0}, {0x6096, 0x00c1}, {0x6000, 0x008c}, +}; + +static struct validx tbl_big_b[] = { + {0x603d, 0x0086}, {0x6000, 0x0050}, {0x6090, 0x0051}, {0x602c, 0x0052}, + {0x6000, 0x0053}, {0x6000, 0x0054}, {0x6088, 0x0055}, {0x6000, 0x0057}, + {0x6040, 0x005a}, {0x60f0, 0x005b}, {0x6001, 0x005c}, {0x6082, 0x00d3}, + {0x6000, 0x008e}, +}; + +static struct validx tbl_big_c[] = { + {0x6004, 0x00da}, {0x6000, 0x00e0}, {0x6067, 0x00e1}, {0x60ff, 0x00dd}, + {0x6001, 0x00ff}, {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0}, + {0x6001, 0x00ff}, {0x6000, 0x0011}, {0x6000, 0x00ff}, {0x6010, 0x00c7}, + {0x6000, 0x0092}, {0x6006, 0x0093}, {0x60e3, 0x0093}, {0x6005, 0x0093}, + {0x6005, 0x0093}, {0x60ed, 0x00c3}, {0x6000, 0x00a4}, {0x60d0, 0x0087}, + {0x6003, 0x0096}, {0x600c, 0x0097}, {0x6024, 0x0097}, {0x6030, 0x0097}, + {0x6028, 0x0097}, {0x6026, 0x0097}, {0x6002, 0x0097}, {0x6001, 0x00ff}, + {0x6043, 0x000f}, {0x608f, 0x0003}, {0x6000, 0x002d}, {0x6000, 0x002e}, + {0x600a, 0x0022}, {0x6002, 0x0070}, {0x6008, 0x0014}, {0x6048, 0x0014}, + {0x6000, 0x00ff}, {0x6000, 0x00e0}, {0x60ff, 0x00dd}, +}; + +static struct validx tbl_post_unset_alt[] = { + {0x006a, 0x000d}, {0x6001, 0x00ff}, {0x6081, 0x0026}, {0x6000, 0x0000}, + {0x6000, 0x0045}, {0x6000, 0x0010}, {0x6068, 0x000d}, + {50, 0xffff}, + {0x0021, 0x0000}, +}; + +static int ov2640_init_at_startup(struct gspca_dev *gspca_dev); +static int ov2640_configure_alt(struct gspca_dev *gspca_dev); +static int ov2640_init_pre_alt(struct gspca_dev *gspca_dev); +static int ov2640_init_post_alt(struct gspca_dev *gspca_dev); +static void ov2640_post_unset_alt(struct gspca_dev *gspca_dev); +static int ov2640_camera_settings(struct gspca_dev *gspca_dev); +/*==========================================================================*/ + +void ov2640_init_settings(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vcur.backlight = 32; + sd->vcur.brightness = 0; + sd->vcur.sharpness = 6; + sd->vcur.contrast = 0; + sd->vcur.gamma = 32; + sd->vcur.hue = 0; + sd->vcur.saturation = 128; + sd->vcur.whitebal = 64; + + sd->vmax.backlight = 64; + sd->vmax.brightness = 255; + sd->vmax.sharpness = 31; + sd->vmax.contrast = 255; + sd->vmax.gamma = 64; + sd->vmax.hue = 255 + 1; + sd->vmax.saturation = 255; + sd->vmax.whitebal = 128; + sd->vmax.mirror = 0; + sd->vmax.flip = 0; + sd->vmax.AC50Hz = 0; + + sd->dev_camera_settings = ov2640_camera_settings; + sd->dev_init_at_startup = ov2640_init_at_startup; + sd->dev_configure_alt = ov2640_configure_alt; + sd->dev_init_pre_alt = ov2640_init_pre_alt; + sd->dev_post_unset_alt = ov2640_post_unset_alt; +} + +/*==========================================================================*/ + +static void common(struct gspca_dev *gspca_dev) +{ + fetch_validx(gspca_dev, tbl_common, ARRAY_SIZE(tbl_common)); +} + +static int ov2640_init_at_startup(struct gspca_dev *gspca_dev) +{ + fetch_validx(gspca_dev, tbl_init_at_startup, + ARRAY_SIZE(tbl_init_at_startup)); + + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, dat_init1); + + common(gspca_dev); + + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0006, 1, dat_init2); + + ctrl_out(gspca_dev, 0x40, 1, 0x00ef, 0x0006, 0, NULL); + + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, dat_init3); + + ctrl_out(gspca_dev, 0x40, 1, 0x0051, 0x0000, 0, NULL); +/* ctrl_out(gspca_dev, 0x40, 11, 0x0000, 0x0000, 0, NULL); */ + + return 0; +} + +static int ov2640_init_pre_alt(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vold.backlight = -1; + sd->vold.brightness = -1; + sd->vold.sharpness = -1; + sd->vold.contrast = -1; + sd->vold.saturation = -1; + sd->vold.gamma = -1; + sd->vold.hue = -1; + sd->vold.whitebal = -1; + + ov2640_init_post_alt(gspca_dev); + + return 0; +} + +static int ov2640_init_post_alt(struct gspca_dev *gspca_dev) +{ + s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; + s32 n; /* reserved for FETCH macros */ + + ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL); + + n = fetch_validx(gspca_dev, tbl_sensor_settings_common_a, + ARRAY_SIZE(tbl_sensor_settings_common_a)); + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, dat_post); + common(gspca_dev); + keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_a, + ARRAY_SIZE(tbl_sensor_settings_common_a), n); + + switch (reso) { + case IMAGE_640: + n = fetch_validx(gspca_dev, tbl_640, ARRAY_SIZE(tbl_640)); + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, dat_640); + break; + + case IMAGE_800: + n = fetch_validx(gspca_dev, tbl_800, ARRAY_SIZE(tbl_800)); + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, dat_800); + break; + + case IMAGE_1600: + case IMAGE_1280: + n = fetch_validx(gspca_dev, tbl_big_a, ARRAY_SIZE(tbl_big_a)); + + if (reso == IMAGE_1280) { + n = fetch_validx(gspca_dev, tbl_big_b, + ARRAY_SIZE(tbl_big_b)); + } else { + ctrl_out(gspca_dev, 0x40, 1, 0x601d, 0x0086, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6001, 0x00d7, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6082, 0x00d3, 0, NULL); + } + + n = fetch_validx(gspca_dev, tbl_big_c, ARRAY_SIZE(tbl_big_c)); + + if (reso == IMAGE_1280) { + ctrl_out(gspca_dev, 0x40, 1, 0x6001, 0x00ff, 0, NULL); + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, + 12, dat_1280); + } else { + ctrl_out(gspca_dev, 0x40, 1, 0x6020, 0x008c, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6001, 0x00ff, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6076, 0x0018, 0, NULL); + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, + 12, dat_1600); + } + break; + } + + n = fetch_validx(gspca_dev, tbl_sensor_settings_common_b, + ARRAY_SIZE(tbl_sensor_settings_common_b)); + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, c50); + keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b, + ARRAY_SIZE(tbl_sensor_settings_common_b), n); + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x8004, 1, c28); + keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b, + ARRAY_SIZE(tbl_sensor_settings_common_b), n); + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x8004, 1, ca8); + keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b, + ARRAY_SIZE(tbl_sensor_settings_common_b), n); + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, c50); + keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b, + ARRAY_SIZE(tbl_sensor_settings_common_b), n); + + ov2640_camera_settings(gspca_dev); + + return 0; +} + +static int ov2640_configure_alt(struct gspca_dev *gspca_dev) +{ + s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; + + switch (reso) { + case IMAGE_640: + gspca_dev->alt = 3 + 1; + break; + + case IMAGE_800: + case IMAGE_1280: + case IMAGE_1600: + gspca_dev->alt = 1 + 1; + break; + } + return 0; +} + +static int ov2640_camera_settings(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + s32 backlight = sd->vcur.backlight; + s32 bright = sd->vcur.brightness; + s32 sharp = sd->vcur.sharpness; + s32 gam = sd->vcur.gamma; + s32 cntr = sd->vcur.contrast; + s32 sat = sd->vcur.saturation; + s32 hue = sd->vcur.hue; + s32 wbal = sd->vcur.whitebal; + + if (backlight != sd->vold.backlight) { + if (backlight < 0 || backlight > sd->vmax.backlight) + backlight = 0; + + ctrl_out(gspca_dev, 0x40, 1, 0x6001 , 0x00ff, + 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight , 0x0024, + 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight - 10, 0x0025, + 0, NULL); + /* No sd->vold.backlight=backlight; (to be done again later) */ + } + + if (bright != sd->vold.brightness) { + sd->vold.brightness = bright; + if (bright < 0 || bright > sd->vmax.brightness) + bright = 0; + + ctrl_out(gspca_dev, 0x40, 1, 0x6000 , 0x00ff, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6009 , 0x007c, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6000 + bright, 0x007d, 0, NULL); + } + + if (wbal != sd->vold.whitebal) { + sd->vold.whitebal = wbal; + if (wbal < 0 || wbal > sd->vmax.whitebal) + wbal = 0; + + ctrl_out(gspca_dev, 0x40, 1, 0x6000 , 0x00ff, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6003 , 0x007c, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6000 + wbal, 0x007d, 0, NULL); + } + + if (cntr != sd->vold.contrast) { + sd->vold.contrast = cntr; + if (cntr < 0 || cntr > sd->vmax.contrast) + cntr = 0; + + ctrl_out(gspca_dev, 0x40, 1, 0x6000 , 0x00ff, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6007 , 0x007c, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6000 + cntr, 0x007d, 0, NULL); + } + + if (sat != sd->vold.saturation) { + sd->vold.saturation = sat; + if (sat < 0 || sat > sd->vmax.saturation) + sat = 0; + + ctrl_out(gspca_dev, 0x40, 1, 0x6000 , 0x00ff, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6001 , 0x007c, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6000 + sat, 0x007d, 0, NULL); + } + + if (sharp != sd->vold.sharpness) { + sd->vold.sharpness = sharp; + if (sharp < 0 || sharp > sd->vmax.sharpness) + sharp = 0; + + ctrl_out(gspca_dev, 0x40, 1, 0x6000 , 0x00ff, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6001 , 0x0092, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x60c0 + sharp, 0x0093, 0, NULL); + } + + if (hue != sd->vold.hue) { + sd->vold.hue = hue; + if (hue < 0 || hue > sd->vmax.hue) + hue = 0; + + ctrl_out(gspca_dev, 0x40, 1, 0x6000 , 0x00ff, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6002 , 0x007c, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6000 + hue * (hue < 255), 0x007d, + 0, NULL); + if (hue >= sd->vmax.hue) + sd->swapRB = 1; + else + sd->swapRB = 0; + } + + if (gam != sd->vold.gamma) { + sd->vold.gamma = gam; + if (gam < 0 || gam > sd->vmax.gamma) + gam = 0; + + ctrl_out(gspca_dev, 0x40, 1, 0x6000 , 0x00ff, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6008 , 0x007c, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x6000 + gam, 0x007d, 0, NULL); + } + + if (backlight != sd->vold.backlight) { + sd->vold.backlight = backlight; + + ctrl_out(gspca_dev, 0x40, 1, 0x6001 , 0x00ff, + 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight , 0x0024, + 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight - 10, 0x0025, + 0, NULL); + } + + return 0; +} + +static void ov2640_post_unset_alt(struct gspca_dev *gspca_dev) +{ + ctrl_out(gspca_dev, 0x40, 5, 0x0000, 0x0000, 0, NULL); + msleep(20); + fetch_validx(gspca_dev, tbl_post_unset_alt, + ARRAY_SIZE(tbl_post_unset_alt)); +} diff --git a/drivers/media/video/gspca/gl860/gl860-ov9655.c b/drivers/media/video/gspca/gl860/gl860-ov9655.c new file mode 100644 index 00000000000..eda3346f939 --- /dev/null +++ b/drivers/media/video/gspca/gl860/gl860-ov9655.c @@ -0,0 +1,337 @@ +/* @file gl860-ov9655.c + * @author Olivier LORIN, from logs done by Simon (Sur3) and Almighurt + * on dsd's weblog + * @date 2009-08-27 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Sensor : OV9655 */ + +#include "gl860.h" + +static struct validx tbl_init_at_startup[] = { + {0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001, 0x00c1}, + {0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d}, + + {0x0040, 0x0000}, +}; + +static struct validx tbl_commmon[] = { + {0x0041, 0x0000}, {0x006a, 0x0007}, {0x0063, 0x0006}, {0x006a, 0x000d}, + {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1}, {0x0041, 0x00c2}, + {0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058}, {0x0040, 0x0000}, + {0x00f3, 0x0006}, {0x0058, 0x0000}, {0x0048, 0x0000}, {0x0061, 0x0000}, +}; + +static s32 tbl_length[] = {12, 56, 52, 54, 56, 42, 32, 12}; + +static u8 *tbl_640[] = { + "\x00\x40\x07\x6a\x06\xf3\x0d\x6a" "\x10\x10\xc1\x01" + , + "\x12\x80\x00\x00\x01\x98\x02\x80" "\x03\x12\x04\x03\x0b\x57\x0e\x61" + "\x0f\x42\x11\x01\x12\x60\x13\x00" "\x14\x3a\x16\x24\x17\x14\x18\x00" + "\x19\x01\x1a\x3d\x1e\x04\x24\x3c" "\x25\x36\x26\x72\x27\x08\x28\x08" + "\x29\x15\x2a\x00\x2b\x00\x2c\x08" + , + "\x32\xff\x33\x00\x34\x3d\x35\x00" "\x36\xfa\x38\x72\x39\x57\x3a\x00" + "\x3b\x0c\x3d\x99\x3e\x0c\x3f\xc1" "\x40\xc0\x41\x00\x42\xc0\x43\x0a" + "\x44\xf0\x45\x46\x46\x62\x47\x2a" "\x48\x3c\x4a\xee\x4b\xe7\x4c\xe7" + "\x4d\xe7\x4e\xe7" + , + "\x4f\x98\x50\x98\x51\x00\x52\x28" "\x53\x70\x54\x98\x58\x1a\x59\x85" + "\x5a\xa9\x5b\x64\x5c\x84\x5d\x53" "\x5e\x0e\x5f\xf0\x60\xf0\x61\xf0" + "\x62\x00\x63\x00\x64\x02\x65\x20" "\x66\x00\x69\x0a\x6b\x5a\x6c\x04" + "\x6d\x55\x6e\x00\x6f\x9d" + , + "\x70\x15\x71\x78\x72\x00\x73\x00" "\x74\x3a\x75\x35\x76\x01\x77\x02" + "\x7a\x24\x7b\x04\x7c\x07\x7d\x10" "\x7e\x28\x7f\x36\x80\x44\x81\x52" + "\x82\x60\x83\x6c\x84\x78\x85\x8c" "\x86\x9e\x87\xbb\x88\xd2\x89\xe5" + "\x8a\x23\x8c\x8d\x90\x7c\x91\x7b" + , + "\x9d\x02\x9e\x02\x9f\x74\xa0\x73" "\xa1\x40\xa4\x50\xa5\x68\xa6\x70" + "\xa8\xc1\xa9\xef\xaa\x92\xab\x04" "\xac\x80\xad\x80\xae\x80\xaf\x80" + "\xb2\xf2\xb3\x20\xb4\x20\xb5\x00" "\xb6\xaf" + , + "\xbb\xae\xbc\x4f\xbd\x4e\xbe\x6a" "\xbf\x68\xc0\xaa\xc1\xc0\xc2\x01" + "\xc3\x4e\xc6\x85\xc7\x81\xc9\xe0" "\xca\xe8\xcb\xf0\xcc\xd8\xcd\x93" + , + "\xd0\x01\xd1\x08\xd2\xe0\xd3\x01" "\xd4\x10\xd5\x80" +}; + +static u8 *tbl_800[] = { + "\x00\x40\x07\x6a\x06\xf3\x0d\x6a" "\x10\x10\xc1\x01" + , + "\x12\x80\x00\x00\x01\x98\x02\x80" "\x03\x12\x04\x01\x0b\x57\x0e\x61" + "\x0f\x42\x11\x00\x12\x00\x13\x00" "\x14\x3a\x16\x24\x17\x1b\x18\xbb" + "\x19\x01\x1a\x81\x1e\x04\x24\x3c" "\x25\x36\x26\x72\x27\x08\x28\x08" + "\x29\x15\x2a\x00\x2b\x00\x2c\x08" + , + "\x32\xa4\x33\x00\x34\x3d\x35\x00" "\x36\xf8\x38\x72\x39\x57\x3a\x00" + "\x3b\x0c\x3d\x99\x3e\x0c\x3f\xc2" "\x40\xc0\x41\x00\x42\xc0\x43\x0a" + "\x44\xf0\x45\x46\x46\x62\x47\x2a" "\x48\x3c\x4a\xec\x4b\xe8\x4c\xe8" + "\x4d\xe8\x4e\xe8" + , + "\x4f\x98\x50\x98\x51\x00\x52\x28" "\x53\x70\x54\x98\x58\x1a\x59\x85" + "\x5a\xa9\x5b\x64\x5c\x84\x5d\x53" "\x5e\x0e\x5f\xf0\x60\xf0\x61\xf0" + "\x62\x00\x63\x00\x64\x02\x65\x20" "\x66\x00\x69\x02\x6b\x5a\x6c\x04" + "\x6d\x55\x6e\x00\x6f\x9d" + , + "\x70\x08\x71\x78\x72\x00\x73\x01" "\x74\x3a\x75\x35\x76\x01\x77\x02" + "\x7a\x24\x7b\x04\x7c\x07\x7d\x10" "\x7e\x28\x7f\x36\x80\x44\x81\x52" + "\x82\x60\x83\x6c\x84\x78\x85\x8c" "\x86\x9e\x87\xbb\x88\xd2\x89\xe5" + "\x8a\x23\x8c\x0d\x90\x90\x91\x90" + , + "\x9d\x02\x9e\x02\x9f\x94\xa0\x94" "\xa1\x01\xa4\x50\xa5\x68\xa6\x70" + "\xa8\xc1\xa9\xef\xaa\x92\xab\x04" "\xac\x80\xad\x80\xae\x80\xaf\x80" + "\xb2\xf2\xb3\x20\xb4\x20\xb5\x00" "\xb6\xaf" + , + "\xbb\xae\xbc\x38\xbd\x39\xbe\x01" "\xbf\x01\xc0\xe2\xc1\xc0\xc2\x01" + "\xc3\x4e\xc6\x85\xc7\x81\xc9\xe0" "\xca\xe8\xcb\xf0\xcc\xd8\xcd\x93" + , + "\xd0\x21\xd1\x18\xd2\xe0\xd3\x01" "\xd4\x28\xd5\x00" +}; + +static u8 c04[] = {0x04}; +static u8 dat_post_1[] = "\x04\x00\x10\x20\xa1\x00\x00\x02"; +static u8 dat_post_2[] = "\x10\x10\xc1\x02"; +static u8 dat_post_3[] = "\x04\x00\x10\x7c\xa1\x00\x00\x04"; +static u8 dat_post_4[] = "\x10\x02\xc1\x06"; +static u8 dat_post_5[] = "\x04\x00\x10\x7b\xa1\x00\x00\x08"; +static u8 dat_post_6[] = "\x10\x10\xc1\x05"; +static u8 dat_post_7[] = "\x04\x00\x10\x7c\xa1\x00\x00\x08"; +static u8 dat_post_8[] = "\x04\x00\x10\x7c\xa1\x00\x00\x09"; + +static struct validx tbl_init_post_alt[] = { + {0x6032, 0x00ff}, {0x6032, 0x00ff}, {0x6032, 0x00ff}, {0x603c, 0x00ff}, + {0x6003, 0x00ff}, {0x6032, 0x00ff}, {0x6032, 0x00ff}, {0x6001, 0x00ff}, + {0x6000, 0x801e}, + {0xffff, 0xffff}, + {0x6004, 0x001e}, {0x6000, 0x801e}, + {0xffff, 0xffff}, + {0x6004, 0x001e}, {0x6012, 0x0003}, {0x6000, 0x801e}, + {0xffff, 0xffff}, + {0x6004, 0x001e}, {0x6000, 0x801e}, + {0xffff, 0xffff}, + {0x6004, 0x001e}, {0x6012, 0x0003}, + {0xffff, 0xffff}, + {0x6000, 0x801e}, + {0xffff, 0xffff}, + {0x6004, 0x001e}, {0x6000, 0x801e}, + {0xffff, 0xffff}, + {0x6004, 0x001e}, {0x6012, 0x0003}, {0x6000, 0x801e}, + {0xffff, 0xffff}, + {0x6004, 0x001e}, {0x6000, 0x801e}, + {0xffff, 0xffff}, + {0x6004, 0x001e}, {0x6012, 0x0003}, + {0xffff, 0xffff}, + {0x6000, 0x801e}, + {0xffff, 0xffff}, + {0x6004, 0x001e}, {0x6000, 0x801e}, + {0xffff, 0xffff}, + {0x6004, 0x001e}, {0x6012, 0x0003}, +}; + +static int ov9655_init_at_startup(struct gspca_dev *gspca_dev); +static int ov9655_configure_alt(struct gspca_dev *gspca_dev); +static int ov9655_init_pre_alt(struct gspca_dev *gspca_dev); +static int ov9655_init_post_alt(struct gspca_dev *gspca_dev); +static void ov9655_post_unset_alt(struct gspca_dev *gspca_dev); +static int ov9655_camera_settings(struct gspca_dev *gspca_dev); +/*==========================================================================*/ + +void ov9655_init_settings(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vcur.backlight = 0; + sd->vcur.brightness = 128; + sd->vcur.sharpness = 0; + sd->vcur.contrast = 0; + sd->vcur.gamma = 0; + sd->vcur.hue = 0; + sd->vcur.saturation = 0; + sd->vcur.whitebal = 0; + + sd->vmax.backlight = 0; + sd->vmax.brightness = 255; + sd->vmax.sharpness = 0; + sd->vmax.contrast = 0; + sd->vmax.gamma = 0; + sd->vmax.hue = 0 + 1; + sd->vmax.saturation = 0; + sd->vmax.whitebal = 0; + sd->vmax.mirror = 0; + sd->vmax.flip = 0; + sd->vmax.AC50Hz = 0; + + sd->dev_camera_settings = ov9655_camera_settings; + sd->dev_init_at_startup = ov9655_init_at_startup; + sd->dev_configure_alt = ov9655_configure_alt; + sd->dev_init_pre_alt = ov9655_init_pre_alt; + sd->dev_post_unset_alt = ov9655_post_unset_alt; +} + +/*==========================================================================*/ + +static int ov9655_init_at_startup(struct gspca_dev *gspca_dev) +{ + fetch_validx(gspca_dev, tbl_init_at_startup, + ARRAY_SIZE(tbl_init_at_startup)); + fetch_validx(gspca_dev, tbl_commmon, ARRAY_SIZE(tbl_commmon)); +/* ctrl_out(gspca_dev, 0x40, 11, 0x0000, 0x0000, 0, NULL);*/ + + return 0; +} + +static int ov9655_init_pre_alt(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vold.brightness = -1; + sd->vold.hue = -1; + + fetch_validx(gspca_dev, tbl_commmon, ARRAY_SIZE(tbl_commmon)); + + ov9655_init_post_alt(gspca_dev); + + return 0; +} + +static int ov9655_init_post_alt(struct gspca_dev *gspca_dev) +{ + s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; + s32 n; /* reserved for FETCH macros */ + s32 i; + u8 **tbl; + + ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL); + + tbl = (reso == IMAGE_640) ? tbl_640 : tbl_800; + + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, + tbl_length[0], tbl[0]); + for (i = 1; i < 7; i++) + ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, + tbl_length[i], tbl[i]); + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, + tbl_length[7], tbl[7]); + + n = fetch_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt)); + + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_1); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_1); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04); + keep_on_fetching_validx(gspca_dev, tbl_init_post_alt, + ARRAY_SIZE(tbl_init_post_alt), n); + + ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_1); + + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post_2); + ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_3); + + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post_4); + ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_5); + + ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post_6); + ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_7); + + ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_8); + + ov9655_camera_settings(gspca_dev); + + return 0; +} + +static int ov9655_configure_alt(struct gspca_dev *gspca_dev) +{ + s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; + + switch (reso) { + case IMAGE_640: + gspca_dev->alt = 1 + 1; + break; + + default: + gspca_dev->alt = 1 + 1; + break; + } + return 0; +} + +static int ov9655_camera_settings(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + u8 dat_bright[] = "\x04\x00\x10\x7c\xa1\x00\x00\x70"; + + s32 bright = sd->vcur.brightness; + s32 hue = sd->vcur.hue; + + if (bright != sd->vold.brightness) { + sd->vold.brightness = bright; + if (bright < 0 || bright > sd->vmax.brightness) + bright = 0; + + dat_bright[3] = bright; + ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_bright); + } + + if (hue != sd->vold.hue) { + sd->vold.hue = hue; + sd->swapRB = (hue != 0); + } + + return 0; +} + +static void ov9655_post_unset_alt(struct gspca_dev *gspca_dev) +{ + ctrl_out(gspca_dev, 0x40, 5, 0x0000, 0x0000, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0061, 0x0000, 0, NULL); +} diff --git a/drivers/media/video/gspca/gl860/gl860.c b/drivers/media/video/gspca/gl860/gl860.c new file mode 100644 index 00000000000..62f4320fd9d --- /dev/null +++ b/drivers/media/video/gspca/gl860/gl860.c @@ -0,0 +1,783 @@ +/* @file gl860.c + * @date 2009-08-27 + * + * Genesys Logic webcam with gl860 subdrivers + * + * Driver by Olivier Lorin + * GSPCA by Jean-Francois Moine + * Thanks BUGabundo and Malmostoso for your amazing help! + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "gspca.h" +#include "gl860.h" + +MODULE_AUTHOR("Olivier Lorin "); +MODULE_DESCRIPTION("GSPCA/Genesys Logic GL860 USB Camera Driver"); +MODULE_LICENSE("GPL"); + +/*======================== static function declarations ====================*/ + +static void (*dev_init_settings)(struct gspca_dev *gspca_dev); + +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id); +static int sd_init(struct gspca_dev *gspca_dev); +static int sd_isoc_init(struct gspca_dev *gspca_dev); +static int sd_start(struct gspca_dev *gspca_dev); +static void sd_stop0(struct gspca_dev *gspca_dev); +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, u8 *data, s32 len); +static void sd_callback(struct gspca_dev *gspca_dev); + +static int gl860_guess_sensor(struct gspca_dev *gspca_dev, + s32 vendor_id, s32 product_id); + +/*============================ driver options ==============================*/ + +static s32 AC50Hz = 0xff; +module_param(AC50Hz, int, 0644); +MODULE_PARM_DESC(AC50Hz, " Does AC power frequency is 50Hz? (0/1)"); + +static char sensor[7]; +module_param_string(sensor, sensor, sizeof(sensor), 0644); +MODULE_PARM_DESC(sensor, + " Driver sensor ('MI1320'/'MI2020'/'OV9655'/'OV2640'/'')"); + +/*============================ webcam controls =============================*/ + +/* Functions to get and set a control value */ +#define SD_SETGET(thename) \ +static int sd_set_##thename(struct gspca_dev *gspca_dev, s32 val)\ +{\ + struct sd *sd = (struct sd *) gspca_dev;\ +\ + sd->vcur.thename = val;\ + if (gspca_dev->streaming)\ + sd->dev_camera_settings(gspca_dev);\ + return 0;\ +} \ +static int sd_get_##thename(struct gspca_dev *gspca_dev, s32 *val)\ +{\ + struct sd *sd = (struct sd *) gspca_dev;\ +\ + *val = sd->vcur.thename;\ + return 0;\ +} + +SD_SETGET(mirror) +SD_SETGET(flip) +SD_SETGET(AC50Hz) +SD_SETGET(backlight) +SD_SETGET(brightness) +SD_SETGET(gamma) +SD_SETGET(hue) +SD_SETGET(saturation) +SD_SETGET(sharpness) +SD_SETGET(whitebal) +SD_SETGET(contrast) + +#define GL860_NCTRLS 11 + +/* control table */ +static struct ctrl sd_ctrls_mi1320[GL860_NCTRLS]; +static struct ctrl sd_ctrls_mi2020[GL860_NCTRLS]; +static struct ctrl sd_ctrls_mi2020b[GL860_NCTRLS]; +static struct ctrl sd_ctrls_ov2640[GL860_NCTRLS]; +static struct ctrl sd_ctrls_ov9655[GL860_NCTRLS]; + +#define SET_MY_CTRL(theid, \ + thetype, thelabel, thename) \ + if (sd->vmax.thename != 0) {\ + sd_ctrls[nCtrls].qctrl.id = theid;\ + sd_ctrls[nCtrls].qctrl.type = thetype;\ + strcpy(sd_ctrls[nCtrls].qctrl.name, thelabel);\ + sd_ctrls[nCtrls].qctrl.minimum = 0;\ + sd_ctrls[nCtrls].qctrl.maximum = sd->vmax.thename;\ + sd_ctrls[nCtrls].qctrl.default_value = sd->vcur.thename;\ + sd_ctrls[nCtrls].qctrl.step = \ + (sd->vmax.thename < 16) ? 1 : sd->vmax.thename/16;\ + sd_ctrls[nCtrls].set = sd_set_##thename;\ + sd_ctrls[nCtrls].get = sd_get_##thename;\ + nCtrls++;\ + } + +static int gl860_build_control_table(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct ctrl *sd_ctrls; + int nCtrls = 0; + + if (_MI1320_) + sd_ctrls = sd_ctrls_mi1320; + else if (_MI2020_) + sd_ctrls = sd_ctrls_mi2020; + else if (_MI2020b_) + sd_ctrls = sd_ctrls_mi2020b; + else if (_OV2640_) + sd_ctrls = sd_ctrls_ov2640; + else if (_OV9655_) + sd_ctrls = sd_ctrls_ov9655; + + memset(sd_ctrls, 0, GL860_NCTRLS * sizeof(struct ctrl)); + + SET_MY_CTRL(V4L2_CID_BRIGHTNESS, + V4L2_CTRL_TYPE_INTEGER, "Brightness", brightness) + SET_MY_CTRL(V4L2_CID_SHARPNESS, + V4L2_CTRL_TYPE_INTEGER, "Sharpness", sharpness) + SET_MY_CTRL(V4L2_CID_CONTRAST, + V4L2_CTRL_TYPE_INTEGER, "Contrast", contrast) + SET_MY_CTRL(V4L2_CID_GAMMA, + V4L2_CTRL_TYPE_INTEGER, "Gamma", gamma) + SET_MY_CTRL(V4L2_CID_HUE, + V4L2_CTRL_TYPE_INTEGER, "Palette", hue) + SET_MY_CTRL(V4L2_CID_SATURATION, + V4L2_CTRL_TYPE_INTEGER, "Saturation", saturation) + SET_MY_CTRL(V4L2_CID_WHITE_BALANCE_TEMPERATURE, + V4L2_CTRL_TYPE_INTEGER, "White Bal.", whitebal) + SET_MY_CTRL(V4L2_CID_BACKLIGHT_COMPENSATION, + V4L2_CTRL_TYPE_INTEGER, "Backlight" , backlight) + + SET_MY_CTRL(V4L2_CID_HFLIP, + V4L2_CTRL_TYPE_BOOLEAN, "Mirror", mirror) + SET_MY_CTRL(V4L2_CID_VFLIP, + V4L2_CTRL_TYPE_BOOLEAN, "Flip", flip) + SET_MY_CTRL(V4L2_CID_POWER_LINE_FREQUENCY, + V4L2_CTRL_TYPE_BOOLEAN, "50Hz", AC50Hz) + + return nCtrls; +} + +/*==================== sud-driver structure initialisation =================*/ + +static struct sd_desc sd_desc_mi1320 = { + .name = MODULE_NAME, + .ctrls = sd_ctrls_mi1320, + .nctrls = GL860_NCTRLS, + .config = sd_config, + .init = sd_init, + .isoc_init = sd_isoc_init, + .start = sd_start, + .stop0 = sd_stop0, + .pkt_scan = sd_pkt_scan, + .dq_callback = sd_callback, +}; + +static struct sd_desc sd_desc_mi2020 = { + .name = MODULE_NAME, + .ctrls = sd_ctrls_mi2020, + .nctrls = GL860_NCTRLS, + .config = sd_config, + .init = sd_init, + .isoc_init = sd_isoc_init, + .start = sd_start, + .stop0 = sd_stop0, + .pkt_scan = sd_pkt_scan, + .dq_callback = sd_callback, +}; + +static struct sd_desc sd_desc_mi2020b = { + .name = MODULE_NAME, + .ctrls = sd_ctrls_mi2020b, + .nctrls = GL860_NCTRLS, + .config = sd_config, + .init = sd_init, + .isoc_init = sd_isoc_init, + .start = sd_start, + .stop0 = sd_stop0, + .pkt_scan = sd_pkt_scan, + .dq_callback = sd_callback, +}; + +static struct sd_desc sd_desc_ov2640 = { + .name = MODULE_NAME, + .ctrls = sd_ctrls_ov2640, + .nctrls = GL860_NCTRLS, + .config = sd_config, + .init = sd_init, + .isoc_init = sd_isoc_init, + .start = sd_start, + .stop0 = sd_stop0, + .pkt_scan = sd_pkt_scan, + .dq_callback = sd_callback, +}; + +static struct sd_desc sd_desc_ov9655 = { + .name = MODULE_NAME, + .ctrls = sd_ctrls_ov9655, + .nctrls = GL860_NCTRLS, + .config = sd_config, + .init = sd_init, + .isoc_init = sd_isoc_init, + .start = sd_start, + .stop0 = sd_stop0, + .pkt_scan = sd_pkt_scan, + .dq_callback = sd_callback, +}; + +/*=========================== sub-driver image sizes =======================*/ + +static struct v4l2_pix_format mi2020_mode[] = { + { 640, 480, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 + }, + { 800, 600, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 800, + .sizeimage = 800 * 600, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + }, + {1280, 1024, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 1280, + .sizeimage = 1280 * 1024, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2 + }, + {1600, 1200, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 1600, + .sizeimage = 1600 * 1200, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 3 + }, +}; + +static struct v4l2_pix_format ov2640_mode[] = { + { 640, 480, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 + }, + { 800, 600, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 800, + .sizeimage = 800 * 600, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + }, + {1280, 960, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 1280, + .sizeimage = 1280 * 960, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2 + }, + {1600, 1200, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 1600, + .sizeimage = 1600 * 1200, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 3 + }, +}; + +static struct v4l2_pix_format mi1320_mode[] = { + { 640, 480, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 + }, + { 800, 600, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 800, + .sizeimage = 800 * 600, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + }, + {1280, 960, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 1280, + .sizeimage = 1280 * 960, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2 + }, +}; + +static struct v4l2_pix_format ov9655_mode[] = { + { 640, 480, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 + }, + {1280, 960, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 1280, + .sizeimage = 1280 * 960, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + }, +}; + +/*========================= sud-driver functions ===========================*/ + +/* This function is called at probe time */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam; + s32 vendor_id, product_id; + + /* Get USB VendorID and ProductID */ + vendor_id = le16_to_cpu(id->idVendor); + product_id = le16_to_cpu(id->idProduct); + + sd->nbRightUp = 1; + sd->nbIm = -1; + + sd->sensor = 0xff; + if (strcmp(sensor, "MI1320") == 0) + sd->sensor = ID_MI1320; + else if (strcmp(sensor, "OV2640") == 0) + sd->sensor = ID_OV2640; + else if (strcmp(sensor, "OV9655") == 0) + sd->sensor = ID_OV9655; + else if (strcmp(sensor, "MI2020") == 0) + sd->sensor = ID_MI2020; + else if (strcmp(sensor, "MI2020b") == 0) + sd->sensor = ID_MI2020b; + + /* Get sensor and set the suitable init/start/../stop functions */ + if (gl860_guess_sensor(gspca_dev, vendor_id, product_id) == -1) + return -1; + + cam = &gspca_dev->cam; + gspca_dev->nbalt = 4; + + switch (sd->sensor) { + case ID_MI1320: + gspca_dev->sd_desc = &sd_desc_mi1320; + cam->cam_mode = mi1320_mode; + cam->nmodes = ARRAY_SIZE(mi1320_mode); + dev_init_settings = mi1320_init_settings; + break; + + case ID_MI2020: + gspca_dev->sd_desc = &sd_desc_mi2020; + cam->cam_mode = mi2020_mode; + cam->nmodes = ARRAY_SIZE(mi2020_mode); + dev_init_settings = mi2020_init_settings; + break; + + case ID_MI2020b: + gspca_dev->sd_desc = &sd_desc_mi2020b; + cam->cam_mode = mi2020_mode; + cam->nmodes = ARRAY_SIZE(mi2020_mode); + dev_init_settings = mi2020_init_settings; + break; + + case ID_OV2640: + gspca_dev->sd_desc = &sd_desc_ov2640; + cam->cam_mode = ov2640_mode; + cam->nmodes = ARRAY_SIZE(ov2640_mode); + dev_init_settings = ov2640_init_settings; + break; + + case ID_OV9655: + gspca_dev->sd_desc = &sd_desc_ov9655; + cam->cam_mode = ov9655_mode; + cam->nmodes = ARRAY_SIZE(ov9655_mode); + dev_init_settings = ov9655_init_settings; + break; + } + + dev_init_settings(gspca_dev); + if (AC50Hz != 0xff) + ((struct sd *) gspca_dev)->vcur.AC50Hz = AC50Hz; + gl860_build_control_table(gspca_dev); + + return 0; +} + +/* This function is called at probe time after sd_config */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + return sd->dev_init_at_startup(gspca_dev); +} + +/* This function is called before to choose the alt setting */ +static int sd_isoc_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + return sd->dev_configure_alt(gspca_dev); +} + +/* This function is called to start the webcam */ +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + return sd->dev_init_pre_alt(gspca_dev); +} + +/* This function is called to stop the webcam */ +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + return sd->dev_post_unset_alt(gspca_dev); +} + +/* This function is called when an image is being received */ +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, u8 *data, s32 len) +{ + struct sd *sd = (struct sd *) gspca_dev; + static s32 nSkipped; + + s32 mode = (s32) gspca_dev->curr_mode; + s32 nToSkip = + sd->swapRB * (gspca_dev->cam.cam_mode[mode].bytesperline + 1); + + /* Test only against 0202h, so endianess does not matter */ + switch (*(s16 *) data) { + case 0x0202: /* End of frame, start a new one */ + frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + nSkipped = 0; + if (sd->nbIm >= 0 && sd->nbIm < 10) + sd->nbIm++; + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); + break; + + default: + data += 2; + len -= 2; + if (nSkipped + len <= nToSkip) + nSkipped += len; + else { + if (nSkipped < nToSkip && nSkipped + len > nToSkip) { + data += nToSkip - nSkipped; + len -= nToSkip - nSkipped; + nSkipped = nToSkip + 1; + } + gspca_frame_add(gspca_dev, + INTER_PACKET, frame, data, len); + } + break; + } +} + +/* This function is called when an image has been read */ +/* This function is used to monitor webcam orientation */ +static void sd_callback(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (!_OV9655_) { + u8 state; + u8 upsideDown; + + /* Probe sensor orientation */ + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, (void *)&state); + + /* C8/40 means upside-down (looking backwards) */ + /* D8/50 means right-up (looking onwards) */ + upsideDown = (state == 0xc8 || state == 0x40); + + if (upsideDown && sd->nbRightUp > -4) { + if (sd->nbRightUp > 0) + sd->nbRightUp = 0; + if (sd->nbRightUp == -3) { + sd->mirrorMask = 1; + sd->waitSet = 1; + } + sd->nbRightUp--; + } + if (!upsideDown && sd->nbRightUp < 4) { + if (sd->nbRightUp < 0) + sd->nbRightUp = 0; + if (sd->nbRightUp == 3) { + sd->mirrorMask = 0; + sd->waitSet = 1; + } + sd->nbRightUp++; + } + } + + if (sd->waitSet) + sd->dev_camera_settings(gspca_dev); +} + +/*=================== USB driver structure initialisation ==================*/ + +static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x05e3, 0x0503)}, + {USB_DEVICE(0x05e3, 0xf191)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct gspca_dev *gspca_dev; + s32 ret; + + ret = gspca_dev_probe(intf, id, + &sd_desc_mi1320, sizeof(struct sd), THIS_MODULE); + + if (ret >= 0) { + gspca_dev = usb_get_intfdata(intf); + + PDEBUG(D_PROBE, + "Camera is now controlling video device /dev/video%d", + gspca_dev->vdev.minor); + } + + return ret; +} + +static void sd_disconnect(struct usb_interface *intf) +{ + gspca_disconnect(intf); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = sd_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/*====================== Init and Exit module functions ====================*/ + +static int __init sd_mod_init(void) +{ + PDEBUG(D_PROBE, "driver startup - version %s", DRIVER_VERSION); + + if (usb_register(&sd_driver) < 0) + return -1; + PDEBUG(D_PROBE, "driver registered"); + + return 0; +} + +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); + PDEBUG(D_PROBE, "driver deregistered"); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); + +/*==========================================================================*/ + +int gl860_RTx(struct gspca_dev *gspca_dev, + unsigned char pref, u32 req, u16 val, u16 index, + s32 len, void *pdata) +{ + struct usb_device *udev = gspca_dev->dev; + s32 r = 0; + + if (pref == 0x40) { /* Send */ + if (len > 0) { + memcpy(gspca_dev->usb_buf, pdata, len); + r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + req, pref, val, index, + gspca_dev->usb_buf, + len, 400 + 200 * (len > 1)); + } else { + r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + req, pref, val, index, NULL, len, 400); + } + } else { /* Receive */ + if (len > 0) { + r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + req, pref, val, index, + gspca_dev->usb_buf, + len, 400 + 200 * (len > 1)); + memcpy(pdata, gspca_dev->usb_buf, len); + } else { + r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + req, pref, val, index, NULL, len, 400); + } + } + + if (r < 0) + PDEBUG(D_ERR, + "ctrl transfer failed %4d " + "[p%02x r%d v%04x i%04x len%d]", + r, pref, req, val, index, len); + else if (len > 1 && r < len) + PDEBUG(D_ERR, "short ctrl transfer %d/%d", r, len); + + if ((_MI2020_ || _MI2020b_ || _MI2020c_) && (val || index)) + msleep(1); + if (_OV2640_) + msleep(1); + + return r; +} + +int fetch_validx(struct gspca_dev *gspca_dev, struct validx *tbl, int len) +{ + int n; + + for (n = 0; n < len; n++) { + if (tbl[n].idx != 0xffff) + ctrl_out(gspca_dev, 0x40, 1, tbl[n].val, + tbl[n].idx, 0, NULL); + else if (tbl[n].val == 0xffff) + break; + else + msleep(tbl[n].val); + } + return n; +} + +int keep_on_fetching_validx(struct gspca_dev *gspca_dev, struct validx *tbl, + int len, int n) +{ + while (++n < len) { + if (tbl[n].idx != 0xffff) + ctrl_out(gspca_dev, 0x40, 1, tbl[n].val, tbl[n].idx, + 0, NULL); + else if (tbl[n].val == 0xffff) + break; + else + msleep(tbl[n].val); + } + return n; +} + +void fetch_idxdata(struct gspca_dev *gspca_dev, struct idxdata *tbl, int len) +{ + int n; + + for (n = 0; n < len; n++) { + if (memcmp(tbl[n].data, "\xff\xff\xff", 3) != 0) + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, tbl[n].idx, + 3, tbl[n].data); + else + msleep(tbl[n].idx); + } +} + +static int gl860_guess_sensor(struct gspca_dev *gspca_dev, + s32 vendor_id, s32 product_id) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 probe, nb26, nb96, nOV, ntry; + + if (product_id == 0xf191) + sd->sensor = ID_MI1320; + + if (sd->sensor == 0xff) { + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0004, 1, &probe); + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0004, 1, &probe); + + ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x0000, 0, NULL); + msleep(3); + ctrl_out(gspca_dev, 0x40, 1, 0x0010, 0x0010, 0, NULL); + msleep(3); + ctrl_out(gspca_dev, 0x40, 1, 0x0008, 0x00c0, 0, NULL); + msleep(3); + ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x00c1, 0, NULL); + msleep(3); + ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x00c2, 0, NULL); + msleep(3); + ctrl_out(gspca_dev, 0x40, 1, 0x0020, 0x0006, 0, NULL); + msleep(3); + ctrl_out(gspca_dev, 0x40, 1, 0x006a, 0x000d, 0, NULL); + msleep(56); + + nOV = 0; + for (ntry = 0; ntry < 4; ntry++) { + ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL); + msleep(3); + ctrl_out(gspca_dev, 0x40, 1, 0x0063, 0x0006, 0, NULL); + msleep(3); + ctrl_out(gspca_dev, 0x40, 1, 0x7a00, 0x8030, 0, NULL); + msleep(10); + ctrl_in(gspca_dev, 0xc0, 2, 0x7a00, 0x8030, 1, &probe); + PDEBUG(D_PROBE, "1st probe=%02x", probe); + if (probe == 0xff) + nOV++; + } + + if (nOV) { + PDEBUG(D_PROBE, "0xff -> sensor OVXXXX"); + PDEBUG(D_PROBE, "Probing for sensor OV2640 or OV9655"); + + nb26 = nb96 = 0; + for (ntry = 0; ntry < 4; ntry++) { + ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, + 0, NULL); + msleep(3); + ctrl_out(gspca_dev, 0x40, 1, 0x6000, 0x800a, + 0, NULL); + msleep(10); + /* Wait for 26(OV2640) or 96(OV9655) */ + ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x800a, + 1, &probe); + + PDEBUG(D_PROBE, "2nd probe=%02x", probe); + if (probe == 0x00) + nb26++; + if (probe == 0x26 || probe == 0x40) { + sd->sensor = ID_OV2640; + nb26 += 4; + break; + } + if (probe == 0x96 || probe == 0x55) { + sd->sensor = ID_OV9655; + nb96 += 4; + break; + } + if (probe == 0xff) + nb96++; + msleep(3); + } + if (nb26 < 4 && nb96 < 4) { + PDEBUG(D_PROBE, "No relevant answer "); + PDEBUG(D_PROBE, "* 1.3Mpixels -> use OV9655"); + PDEBUG(D_PROBE, "* 2.0Mpixels -> use OV2640"); + PDEBUG(D_PROBE, + "To force a sensor, add that line to " + "/etc/modprobe.d/options.conf:"); + PDEBUG(D_PROBE, "options gspca_gl860 " + "sensor=\"OV2640\" or \"OV9655\""); + return -1; + } + } else { /* probe = 0 */ + PDEBUG(D_PROBE, "No 0xff -> sensor MI2020"); + sd->sensor = ID_MI2020; + } + } + + if (_MI1320_) { + PDEBUG(D_PROBE, "05e3:f191 sensor MI1320 (1.3M)"); + } else if (_MI2020_) { + PDEBUG(D_PROBE, "05e3:0503 sensor MI2020 (2.0M)"); + } else if (_MI2020b_) { + PDEBUG(D_PROBE, "05e3:0503 sensor MI2020 alt. driver (2.0M)"); + } else if (_OV9655_) { + PDEBUG(D_PROBE, "05e3:0503 sensor OV9655 (1.3M)"); + } else if (_OV2640_) { + PDEBUG(D_PROBE, "05e3:0503 sensor OV2640 (2.0M)"); + } else { + PDEBUG(D_PROBE, "***** Unknown sensor *****"); + return -1; + } + + return 0; +} diff --git a/drivers/media/video/gspca/gl860/gl860.h b/drivers/media/video/gspca/gl860/gl860.h new file mode 100644 index 00000000000..cef4e24c1e6 --- /dev/null +++ b/drivers/media/video/gspca/gl860/gl860.h @@ -0,0 +1,108 @@ +/* @file gl860.h + * @author Olivier LORIN, tiré du pilote Syntek par Nicolas VIVIEN + * @date 2009-08-27 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef GL860_DEV_H +#define GL860_DEV_H +#include + +#include "gspca.h" + +#define MODULE_NAME "gspca_gl860" +#define DRIVER_VERSION "0.9d10" + +#define ctrl_in gl860_RTx +#define ctrl_out gl860_RTx + +#define ID_MI1320 1 +#define ID_OV2640 2 +#define ID_OV9655 4 +#define ID_MI2020 8 +#define ID_MI2020b 16 + +#define _MI1320_ (((struct sd *) gspca_dev)->sensor == ID_MI1320) +#define _MI2020_ (((struct sd *) gspca_dev)->sensor == ID_MI2020) +#define _MI2020b_ (((struct sd *) gspca_dev)->sensor == ID_MI2020b) +#define _MI2020c_ 0 +#define _OV2640_ (((struct sd *) gspca_dev)->sensor == ID_OV2640) +#define _OV9655_ (((struct sd *) gspca_dev)->sensor == ID_OV9655) + +#define IMAGE_640 0 +#define IMAGE_800 1 +#define IMAGE_1280 2 +#define IMAGE_1600 3 + +struct sd_gl860 { + u16 backlight; + u16 brightness; + u16 sharpness; + u16 contrast; + u16 gamma; + u16 hue; + u16 saturation; + u16 whitebal; + u8 mirror; + u8 flip; + u8 AC50Hz; +}; + +/* Specific webcam descriptor */ +struct sd { + struct gspca_dev gspca_dev; /* !! must be the first item */ + + struct sd_gl860 vcur; + struct sd_gl860 vold; + struct sd_gl860 vmax; + + int (*dev_configure_alt) (struct gspca_dev *); + int (*dev_init_at_startup)(struct gspca_dev *); + int (*dev_init_pre_alt) (struct gspca_dev *); + void (*dev_post_unset_alt) (struct gspca_dev *); + int (*dev_camera_settings)(struct gspca_dev *); + + u8 swapRB; + u8 mirrorMask; + u8 sensor; + s32 nbIm; + s32 nbRightUp; + u8 waitSet; +}; + +struct validx { + u16 val; + u16 idx; +}; + +struct idxdata { + u8 idx; + u8 data[3]; +}; + +int fetch_validx(struct gspca_dev *gspca_dev, struct validx *tbl, int len); +int keep_on_fetching_validx(struct gspca_dev *gspca_dev, struct validx *tbl, + int len, int n); +void fetch_idxdata(struct gspca_dev *gspca_dev, struct idxdata *tbl, int len); + +int gl860_RTx(struct gspca_dev *gspca_dev, + unsigned char pref, u32 req, u16 val, u16 index, + s32 len, void *pdata); + +void mi1320_init_settings(struct gspca_dev *); +void ov2640_init_settings(struct gspca_dev *); +void ov9655_init_settings(struct gspca_dev *); +void mi2020_init_settings(struct gspca_dev *); + +#endif -- cgit v1.2.3-70-g09d2 From 93463895ae0a87b689d71d65c44d5ccdcd950dc4 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 15 Sep 2009 23:04:18 -0300 Subject: V4L/DVB (12964): tuner-core: add support for NXP TDA18271 without TDA829X demod Add support for NXP TDA18271 as a standalone tuner, allowing the use of analog demodulators other than the Philips/NXP TDA829x. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.tuner | 1 + drivers/media/common/tuners/tuner-types.c | 4 ++++ drivers/media/video/tuner-core.c | 12 ++++++++++++ include/media/tuner.h | 1 + 4 files changed, 18 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index 3561b09fb41..e0d298fe883 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -80,3 +80,4 @@ tuner=79 - Philips PAL/SECAM multi (FM1216 MK5) tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough tuner=81 - Partsnic (Daewoo) PTI-5NF05 tuner=82 - Philips CU1216L +tuner=83 - NXP TDA18271 diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index a2204df796e..2b876f3988c 100644 --- a/drivers/media/common/tuners/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -1801,6 +1801,10 @@ struct tunertype tuners[] = { .count = ARRAY_SIZE(tuner_philips_cu1216l_params), .stepsize = 62500, }, + [TUNER_NXP_TDA18271] = { + .name = "NXP TDA18271", + /* see tda18271-fe.c for details */ + }, }; EXPORT_SYMBOL(tuners); diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 2816f183923..aba92e2313d 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -29,6 +29,7 @@ #include "tuner-simple.h" #include "tda9887.h" #include "xc5000.h" +#include "tda18271.h" #define UNSET (-1U) @@ -420,6 +421,17 @@ static void set_type(struct i2c_client *c, unsigned int type, goto attach_failed; break; } + case TUNER_NXP_TDA18271: + { + struct tda18271_config cfg = { + .config = t->config, + }; + + if (!dvb_attach(tda18271_attach, &t->fe, t->i2c->addr, + t->i2c->adapter, &cfg)) + goto attach_failed; + break; + } default: if (!dvb_attach(simple_tuner_attach, &t->fe, t->i2c->adapter, t->i2c->addr, t->type)) diff --git a/include/media/tuner.h b/include/media/tuner.h index b1f57e175e9..4d5b53ff17d 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -128,6 +128,7 @@ #define TUNER_PHILIPS_FQ1216LME_MK3 80 /* Active loopthrough, no FM */ #define TUNER_PARTSNIC_PTI_5NF05 81 #define TUNER_PHILIPS_CU1216L 82 +#define TUNER_NXP_TDA18271 83 /* tv card specific */ #define TDA9887_PRESENT (1<<0) -- cgit v1.2.3-70-g09d2 From 3b501de58bf4cd16563d1acec43a11c7cd1517fe Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 17 Sep 2009 13:45:00 -0300 Subject: Docbook/media: Fix some issues at the docbooks - Add a few missing entities; - Some text fixes at remote controllers; - Add a missing tag at videodev2.h xml version. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media-entities.tmpl | 181 ++++++++++++----------- Documentation/DocBook/v4l/remote_controllers.xml | 6 +- Documentation/DocBook/v4l/videodev2.h.xml | 1 + 3 files changed, 95 insertions(+), 93 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl index 944087b5733..0eb43c1970b 100644 --- a/Documentation/DocBook/media-entities.tmpl +++ b/Documentation/DocBook/media-entities.tmpl @@ -203,96 +203,6 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -302,6 +212,7 @@ + @@ -321,6 +232,7 @@ + @@ -361,3 +273,92 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/v4l/remote_controllers.xml index 985325cbc9a..73f5eab091f 100644 --- a/Documentation/DocBook/v4l/remote_controllers.xml +++ b/Documentation/DocBook/v4l/remote_controllers.xml @@ -2,12 +2,12 @@
Introduction -Currently, most analog and digital devices have a Infrared input for remote controllers. Each -manufacturer has their own type of control. It is not rare for the same manufacturer to ship different +Currently, most analog and digital devices have a Infrared input for remote controllers. Each +manufacturer has their own type of control. It is not rare for the same manufacturer to ship different types of controls, depending on the device. Unfortunately, for several years, there was no effort to create uniform IR keycodes for different devices. This caused the same IR keyname to be mapped completely differently on -different IR devices. This resulted that the same IR keyname to be mapped completely different on +different IR devices. This resulted that the same IR keyname to be mapped completely different on different IR's. Due to that, V4L2 API now specifies a standard for mapping Media keys on IR. This standard should be used by both V4L/DVB drivers and userspace applications The modules register the remote as keyboard within the linux input layer. This means that the IR key strokes will look like normal keyboard key strokes (if CONFIG_INPUT_KEYBOARD is enabled). Using the event devices (CONFIG_INPUT_EVDEV) it is possible for applications to access the remote via /dev/input/event devices. diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml index 6a8e1394069..97002060ac4 100644 --- a/Documentation/DocBook/v4l/videodev2.h.xml +++ b/Documentation/DocBook/v4l/videodev2.h.xml @@ -362,6 +362,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ #define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ #define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ +#define V4L2_PIX_FMT_TM6000 v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */ /* * F O R M A T E N U M E R A T I O N -- cgit v1.2.3-70-g09d2 From 6a6c8786725c0b3d143674effa8b772f47b1c189 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 25 Aug 2009 11:50:46 -0300 Subject: V4L/DVB (12534): soc-camera: V4L2 API compliant scaling (S_FMT) and cropping (S_CROP) The initial soc-camera scaling and cropping implementation turned out to be incompliant with the V4L2 API, e.g., it expected the user to specify cropping in output window pixels, instead of input window pixels. This patch converts the soc-camera core and all drivers to comply with the standard. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/soc-camera.txt | 40 ++ drivers/media/video/mt9m001.c | 142 ++++- drivers/media/video/mt9m111.c | 112 +++- drivers/media/video/mt9t031.c | 220 ++++---- drivers/media/video/mt9v022.c | 131 ++++- drivers/media/video/mx1_camera.c | 10 +- drivers/media/video/mx3_camera.c | 114 ++-- drivers/media/video/ov772x.c | 84 ++- drivers/media/video/pxa_camera.c | 201 +++++-- drivers/media/video/sh_mobile_ceu_camera.c | 828 ++++++++++++++++++++--------- drivers/media/video/soc_camera.c | 130 +++-- drivers/media/video/soc_camera_platform.c | 4 - drivers/media/video/tw9910.c | 120 +++-- include/media/soc_camera.h | 21 +- 14 files changed, 1524 insertions(+), 633 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/soc-camera.txt b/Documentation/video4linux/soc-camera.txt index 178ef3c5e57..3f87c7da4ca 100644 --- a/Documentation/video4linux/soc-camera.txt +++ b/Documentation/video4linux/soc-camera.txt @@ -116,5 +116,45 @@ functionality. struct soc_camera_device also links to an array of struct soc_camera_data_format, listing pixel formats, supported by the camera. +VIDIOC_S_CROP and VIDIOC_S_FMT behaviour +---------------------------------------- + +Above user ioctls modify image geometry as follows: + +VIDIOC_S_CROP: sets location and sizes of the sensor window. Unit is one sensor +pixel. Changing sensor window sizes preserves any scaling factors, therefore +user window sizes change as well. + +VIDIOC_S_FMT: sets user window. Should preserve previously set sensor window as +much as possible by modifying scaling factors. If the sensor window cannot be +preserved precisely, it may be changed too. + +In soc-camera there are two locations, where scaling and cropping can taks +place: in the camera driver and in the host driver. User ioctls are first passed +to the host driver, which then generally passes them down to the camera driver. +It is more efficient to perform scaling and cropping in the camera driver to +save camera bus bandwidth and maximise the framerate. However, if the camera +driver failed to set the required parameters with sufficient precision, the host +driver may decide to also use its own scaling and cropping to fulfill the user's +request. + +Camera drivers are interfaced to the soc-camera core and to host drivers over +the v4l2-subdev API, which is completely functional, it doesn't pass any data. +Therefore all camera drivers shall reply to .g_fmt() requests with their current +output geometry. This is necessary to correctly configure the camera bus. +.s_fmt() and .try_fmt() have to be implemented too. Sensor window and scaling +factors have to be maintained by camera drivers internally. According to the +V4L2 API all capture drivers must support the VIDIOC_CROPCAP ioctl, hence we +rely on camera drivers implementing .cropcap(). If the camera driver does not +support cropping, it may choose to not implement .s_crop(), but to enable +cropping support by the camera host driver at least the .g_crop method must be +implemented. + +User window geometry is kept in .user_width and .user_height fields in struct +soc_camera_device and used by the soc-camera core and host drivers. The core +updates these fields upon successful completion of a .s_fmt() call, but if these +fields change elsewhere, e.g., during .s_crop() processing, the host driver is +responsible for updating them. + -- Author: Guennadi Liakhovetski diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c index 775e1a3c98d..e8cf56189ef 100644 --- a/drivers/media/video/mt9m001.c +++ b/drivers/media/video/mt9m001.c @@ -39,6 +39,13 @@ #define MT9M001_GLOBAL_GAIN 0x35 #define MT9M001_CHIP_ENABLE 0xF1 +#define MT9M001_MAX_WIDTH 1280 +#define MT9M001_MAX_HEIGHT 1024 +#define MT9M001_MIN_WIDTH 48 +#define MT9M001_MIN_HEIGHT 32 +#define MT9M001_COLUMN_SKIP 20 +#define MT9M001_ROW_SKIP 12 + static const struct soc_camera_data_format mt9m001_colour_formats[] = { /* Order important: first natively supported, * second supported with a GPIO extender */ @@ -70,6 +77,8 @@ static const struct soc_camera_data_format mt9m001_monochrome_formats[] = { struct mt9m001 { struct v4l2_subdev subdev; + struct v4l2_rect rect; /* Sensor window */ + __u32 fourcc; int model; /* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */ unsigned char autoexposure; }; @@ -196,13 +205,31 @@ static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd) static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; struct i2c_client *client = sd->priv; struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_rect rect = a->c; struct soc_camera_device *icd = client->dev.platform_data; int ret; const u16 hblank = 9, vblank = 25; + if (mt9m001->fourcc == V4L2_PIX_FMT_SBGGR8 || + mt9m001->fourcc == V4L2_PIX_FMT_SBGGR16) + /* + * Bayer format - even number of rows for simplicity, + * but let the user play with the top row. + */ + rect.height = ALIGN(rect.height, 2); + + /* Datasheet requirement: see register description */ + rect.width = ALIGN(rect.width, 2); + rect.left = ALIGN(rect.left, 2); + + soc_camera_limit_side(&rect.left, &rect.width, + MT9M001_COLUMN_SKIP, MT9M001_MIN_WIDTH, MT9M001_MAX_WIDTH); + + soc_camera_limit_side(&rect.top, &rect.height, + MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT); + /* Blanking and start values - default... */ ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank); if (!ret) @@ -211,46 +238,98 @@ static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) /* The caller provides a supported format, as verified per * call to icd->try_fmt() */ if (!ret) - ret = reg_write(client, MT9M001_COLUMN_START, rect->left); + ret = reg_write(client, MT9M001_COLUMN_START, rect.left); if (!ret) - ret = reg_write(client, MT9M001_ROW_START, rect->top); + ret = reg_write(client, MT9M001_ROW_START, rect.top); if (!ret) - ret = reg_write(client, MT9M001_WINDOW_WIDTH, rect->width - 1); + ret = reg_write(client, MT9M001_WINDOW_WIDTH, rect.width - 1); if (!ret) ret = reg_write(client, MT9M001_WINDOW_HEIGHT, - rect->height + icd->y_skip_top - 1); + rect.height + icd->y_skip_top - 1); if (!ret && mt9m001->autoexposure) { ret = reg_write(client, MT9M001_SHUTTER_WIDTH, - rect->height + icd->y_skip_top + vblank); + rect.height + icd->y_skip_top + vblank); if (!ret) { const struct v4l2_queryctrl *qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE); - icd->exposure = (524 + (rect->height + icd->y_skip_top + + icd->exposure = (524 + (rect.height + icd->y_skip_top + vblank - 1) * (qctrl->maximum - qctrl->minimum)) / 1048 + qctrl->minimum; } } + if (!ret) + mt9m001->rect = rect; + return ret; } +static int mt9m001_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = sd->priv; + struct mt9m001 *mt9m001 = to_mt9m001(client); + + a->c = mt9m001->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int mt9m001_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = MT9M001_COLUMN_SKIP; + a->bounds.top = MT9M001_ROW_SKIP; + a->bounds.width = MT9M001_MAX_WIDTH; + a->bounds.height = MT9M001_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int mt9m001_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) +{ + struct i2c_client *client = sd->priv; + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_pix_format *pix = &f->fmt.pix; + + pix->width = mt9m001->rect.width; + pix->height = mt9m001->rect.height; + pix->pixelformat = mt9m001->fourcc; + pix->field = V4L2_FIELD_NONE; + pix->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + static int mt9m001_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) { struct i2c_client *client = sd->priv; - struct soc_camera_device *icd = client->dev.platform_data; + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_pix_format *pix = &f->fmt.pix; struct v4l2_crop a = { .c = { - .left = icd->rect_current.left, - .top = icd->rect_current.top, - .width = f->fmt.pix.width, - .height = f->fmt.pix.height, + .left = mt9m001->rect.left, + .top = mt9m001->rect.top, + .width = pix->width, + .height = pix->height, }, }; + int ret; /* No support for scaling so far, just crop. TODO: use skipping */ - return mt9m001_s_crop(sd, &a); + ret = mt9m001_s_crop(sd, &a); + if (!ret) { + pix->width = mt9m001->rect.width; + pix->height = mt9m001->rect.height; + mt9m001->fourcc = pix->pixelformat; + } + + return ret; } static int mt9m001_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) @@ -259,9 +338,14 @@ static int mt9m001_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) struct soc_camera_device *icd = client->dev.platform_data; struct v4l2_pix_format *pix = &f->fmt.pix; - v4l_bound_align_image(&pix->width, 48, 1280, 1, - &pix->height, 32 + icd->y_skip_top, - 1024 + icd->y_skip_top, 0, 0); + v4l_bound_align_image(&pix->width, MT9M001_MIN_WIDTH, + MT9M001_MAX_WIDTH, 1, + &pix->height, MT9M001_MIN_HEIGHT + icd->y_skip_top, + MT9M001_MAX_HEIGHT + icd->y_skip_top, 0, 0); + + if (pix->pixelformat == V4L2_PIX_FMT_SBGGR8 || + pix->pixelformat == V4L2_PIX_FMT_SBGGR16) + pix->height = ALIGN(pix->height - 1, 2); return 0; } @@ -472,11 +556,11 @@ static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) if (ctrl->value) { const u16 vblank = 25; if (reg_write(client, MT9M001_SHUTTER_WIDTH, - icd->rect_current.height + + mt9m001->rect.height + icd->y_skip_top + vblank) < 0) return -EIO; qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE); - icd->exposure = (524 + (icd->rect_current.height + + icd->exposure = (524 + (mt9m001->rect.height + icd->y_skip_top + vblank - 1) * (qctrl->maximum - qctrl->minimum)) / 1048 + qctrl->minimum; @@ -548,6 +632,8 @@ static int mt9m001_video_probe(struct soc_camera_device *icd, if (flags & SOCAM_DATAWIDTH_8) icd->num_formats++; + mt9m001->fourcc = icd->formats->fourcc; + dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data, data == 0x8431 ? "C12STM" : "C12ST"); @@ -556,10 +642,9 @@ static int mt9m001_video_probe(struct soc_camera_device *icd, static void mt9m001_video_remove(struct soc_camera_device *icd) { - struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); struct soc_camera_link *icl = to_soc_camera_link(icd); - dev_dbg(&client->dev, "Video %x removed: %p, %p\n", client->addr, + dev_dbg(&icd->dev, "Video removed: %p, %p\n", icd->dev.parent, icd->vdev); if (icl->free_bus) icl->free_bus(icl); @@ -578,8 +663,11 @@ static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { .s_stream = mt9m001_s_stream, .s_fmt = mt9m001_s_fmt, + .g_fmt = mt9m001_g_fmt, .try_fmt = mt9m001_try_fmt, .s_crop = mt9m001_s_crop, + .g_crop = mt9m001_g_crop, + .cropcap = mt9m001_cropcap, }; static struct v4l2_subdev_ops mt9m001_subdev_ops = { @@ -621,15 +709,13 @@ static int mt9m001_probe(struct i2c_client *client, /* Second stage probe - when a capture adapter is there */ icd->ops = &mt9m001_ops; - icd->rect_max.left = 20; - icd->rect_max.top = 12; - icd->rect_max.width = 1280; - icd->rect_max.height = 1024; - icd->rect_current.left = 20; - icd->rect_current.top = 12; - icd->width_min = 48; - icd->height_min = 32; icd->y_skip_top = 1; + + mt9m001->rect.left = MT9M001_COLUMN_SKIP; + mt9m001->rect.top = MT9M001_ROW_SKIP; + mt9m001->rect.width = MT9M001_MAX_WIDTH; + mt9m001->rect.height = MT9M001_MAX_HEIGHT; + /* Simulated autoexposure. If enabled, we calculate shutter width * ourselves in the driver based on vertical blanking and frame width */ mt9m001->autoexposure = 1; diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index 3637376da75..920dd53c4cf 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -194,7 +194,7 @@ static int mt9m111_reg_read(struct i2c_client *client, const u16 reg) ret = reg_page_map_set(client, reg); if (!ret) - ret = swab16(i2c_smbus_read_word_data(client, (reg & 0xff))); + ret = swab16(i2c_smbus_read_word_data(client, reg & 0xff)); dev_dbg(&client->dev, "read reg.%03x -> %04x\n", reg, ret); return ret; @@ -257,8 +257,8 @@ static int mt9m111_setup_rect(struct i2c_client *client, int width = rect->width; int height = rect->height; - if ((mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR8) - || (mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR16)) + if (mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR8 || + mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR16) is_raw_format = 1; else is_raw_format = 0; @@ -395,23 +395,85 @@ static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f) return 0; } +static int mt9m111_make_rect(struct i2c_client *client, + struct v4l2_rect *rect) +{ + struct mt9m111 *mt9m111 = to_mt9m111(client); + + if (mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR8 || + mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR16) { + /* Bayer format - even size lengths */ + rect->width = ALIGN(rect->width, 2); + rect->height = ALIGN(rect->height, 2); + /* Let the user play with the starting pixel */ + } + + /* FIXME: the datasheet doesn't specify minimum sizes */ + soc_camera_limit_side(&rect->left, &rect->width, + MT9M111_MIN_DARK_COLS, 2, MT9M111_MAX_WIDTH); + + soc_camera_limit_side(&rect->top, &rect->height, + MT9M111_MIN_DARK_ROWS, 2, MT9M111_MAX_HEIGHT); + + return mt9m111_setup_rect(client, rect); +} + static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; + struct v4l2_rect rect = a->c; struct i2c_client *client = sd->priv; struct mt9m111 *mt9m111 = to_mt9m111(client); int ret; dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n", - __func__, rect->left, rect->top, rect->width, - rect->height); + __func__, rect.left, rect.top, rect.width, rect.height); - ret = mt9m111_setup_rect(client, rect); + ret = mt9m111_make_rect(client, &rect); if (!ret) - mt9m111->rect = *rect; + mt9m111->rect = rect; return ret; } +static int mt9m111_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = sd->priv; + struct mt9m111 *mt9m111 = to_mt9m111(client); + + a->c = mt9m111->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = MT9M111_MIN_DARK_COLS; + a->bounds.top = MT9M111_MIN_DARK_ROWS; + a->bounds.width = MT9M111_MAX_WIDTH; + a->bounds.height = MT9M111_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int mt9m111_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) +{ + struct i2c_client *client = sd->priv; + struct mt9m111 *mt9m111 = to_mt9m111(client); + struct v4l2_pix_format *pix = &f->fmt.pix; + + pix->width = mt9m111->rect.width; + pix->height = mt9m111->rect.height; + pix->pixelformat = mt9m111->pixfmt; + pix->field = V4L2_FIELD_NONE; + pix->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + static int mt9m111_set_pixfmt(struct i2c_client *client, u32 pixfmt) { struct mt9m111 *mt9m111 = to_mt9m111(client); @@ -478,7 +540,7 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) __func__, pix->pixelformat, rect.left, rect.top, rect.width, rect.height); - ret = mt9m111_setup_rect(client, &rect); + ret = mt9m111_make_rect(client, &rect); if (!ret) ret = mt9m111_set_pixfmt(client, pix->pixelformat); if (!ret) @@ -489,11 +551,27 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) static int mt9m111_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) { struct v4l2_pix_format *pix = &f->fmt.pix; + bool bayer = pix->pixelformat == V4L2_PIX_FMT_SBGGR8 || + pix->pixelformat == V4L2_PIX_FMT_SBGGR16; + + /* + * With Bayer format enforce even side lengths, but let the user play + * with the starting pixel + */ if (pix->height > MT9M111_MAX_HEIGHT) pix->height = MT9M111_MAX_HEIGHT; + else if (pix->height < 2) + pix->height = 2; + else if (bayer) + pix->height = ALIGN(pix->height, 2); + if (pix->width > MT9M111_MAX_WIDTH) pix->width = MT9M111_MAX_WIDTH; + else if (pix->width < 2) + pix->width = 2; + else if (bayer) + pix->width = ALIGN(pix->width, 2); return 0; } @@ -906,8 +984,11 @@ static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = { static struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = { .s_fmt = mt9m111_s_fmt, + .g_fmt = mt9m111_g_fmt, .try_fmt = mt9m111_try_fmt, .s_crop = mt9m111_s_crop, + .g_crop = mt9m111_g_crop, + .cropcap = mt9m111_cropcap, }; static struct v4l2_subdev_ops mt9m111_subdev_ops = { @@ -949,16 +1030,13 @@ static int mt9m111_probe(struct i2c_client *client, /* Second stage probe - when a capture adapter is there */ icd->ops = &mt9m111_ops; - icd->rect_max.left = MT9M111_MIN_DARK_COLS; - icd->rect_max.top = MT9M111_MIN_DARK_ROWS; - icd->rect_max.width = MT9M111_MAX_WIDTH; - icd->rect_max.height = MT9M111_MAX_HEIGHT; - icd->rect_current.left = icd->rect_max.left; - icd->rect_current.top = icd->rect_max.top; - icd->width_min = MT9M111_MIN_DARK_ROWS; - icd->height_min = MT9M111_MIN_DARK_COLS; icd->y_skip_top = 0; + mt9m111->rect.left = MT9M111_MIN_DARK_COLS; + mt9m111->rect.top = MT9M111_MIN_DARK_ROWS; + mt9m111->rect.width = MT9M111_MAX_WIDTH; + mt9m111->rect.height = MT9M111_MAX_HEIGHT; + ret = mt9m111_video_probe(icd, client); if (ret) { icd->ops = NULL; diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c index cd3eb7731ac..f234ba60204 100644 --- a/drivers/media/video/mt9t031.c +++ b/drivers/media/video/mt9t031.c @@ -47,7 +47,7 @@ #define MT9T031_MAX_HEIGHT 1536 #define MT9T031_MAX_WIDTH 2048 #define MT9T031_MIN_HEIGHT 2 -#define MT9T031_MIN_WIDTH 2 +#define MT9T031_MIN_WIDTH 18 #define MT9T031_HORIZONTAL_BLANK 142 #define MT9T031_VERTICAL_BLANK 25 #define MT9T031_COLUMN_SKIP 32 @@ -69,10 +69,11 @@ static const struct soc_camera_data_format mt9t031_colour_formats[] = { struct mt9t031 { struct v4l2_subdev subdev; + struct v4l2_rect rect; /* Sensor window */ int model; /* V4L2_IDENT_MT9T031* codes from v4l2-chip-ident.h */ - unsigned char autoexposure; u16 xskip; u16 yskip; + unsigned char autoexposure; }; static struct mt9t031 *to_mt9t031(const struct i2c_client *client) @@ -218,56 +219,68 @@ static unsigned long mt9t031_query_bus_param(struct soc_camera_device *icd) return soc_camera_apply_sensor_flags(icl, MT9T031_BUS_PARAM); } -/* Round up minima and round down maxima */ -static void recalculate_limits(struct soc_camera_device *icd, - u16 xskip, u16 yskip) +/* target must be _even_ */ +static u16 mt9t031_skip(s32 *source, s32 target, s32 max) { - icd->rect_max.left = (MT9T031_COLUMN_SKIP + xskip - 1) / xskip; - icd->rect_max.top = (MT9T031_ROW_SKIP + yskip - 1) / yskip; - icd->width_min = (MT9T031_MIN_WIDTH + xskip - 1) / xskip; - icd->height_min = (MT9T031_MIN_HEIGHT + yskip - 1) / yskip; - icd->rect_max.width = MT9T031_MAX_WIDTH / xskip; - icd->rect_max.height = MT9T031_MAX_HEIGHT / yskip; + unsigned int skip; + + if (*source < target + target / 2) { + *source = target; + return 1; + } + + skip = min(max, *source + target / 2) / target; + if (skip > 8) + skip = 8; + *source = target * skip; + + return skip; } +/* rect is the sensor rectangle, the caller guarantees parameter validity */ static int mt9t031_set_params(struct soc_camera_device *icd, struct v4l2_rect *rect, u16 xskip, u16 yskip) { struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); struct mt9t031 *mt9t031 = to_mt9t031(client); int ret; - u16 xbin, ybin, width, height, left, top; + u16 xbin, ybin; const u16 hblank = MT9T031_HORIZONTAL_BLANK, vblank = MT9T031_VERTICAL_BLANK; - width = rect->width * xskip; - height = rect->height * yskip; - left = rect->left * xskip; - top = rect->top * yskip; - xbin = min(xskip, (u16)3); ybin = min(yskip, (u16)3); - dev_dbg(&client->dev, "xskip %u, width %u/%u, yskip %u, height %u/%u\n", - xskip, width, rect->width, yskip, height, rect->height); - - /* Could just do roundup(rect->left, [xy]bin * 2); but this is cheaper */ + /* + * Could just do roundup(rect->left, [xy]bin * 2); but this is cheaper. + * There is always a valid suitably aligned value. The worst case is + * xbin = 3, width = 2048. Then we will start at 36, the last read out + * pixel will be 2083, which is < 2085 - first black pixel. + * + * MT9T031 datasheet imposes window left border alignment, depending on + * the selected xskip. Failing to conform to this requirement produces + * dark horizontal stripes in the image. However, even obeying to this + * requirement doesn't eliminate the stripes in all configurations. They + * appear "locally reproducibly," but can differ between tests under + * different lighting conditions. + */ switch (xbin) { - case 2: - left = (left + 3) & ~3; + case 1: + rect->left &= ~1; break; - case 3: - left = roundup(left, 6); - } - - switch (ybin) { case 2: - top = (top + 3) & ~3; + rect->left &= ~3; break; case 3: - top = roundup(top, 6); + rect->left = rect->left > roundup(MT9T031_COLUMN_SKIP, 6) ? + (rect->left / 6) * 6 : roundup(MT9T031_COLUMN_SKIP, 6); } + rect->top &= ~1; + + dev_dbg(&client->dev, "skip %u:%u, rect %ux%u@%u:%u\n", + xskip, yskip, rect->width, rect->height, rect->left, rect->top); + /* Disable register update, reconfigure atomically */ ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 1); if (ret < 0) @@ -287,27 +300,29 @@ static int mt9t031_set_params(struct soc_camera_device *icd, ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE, ((ybin - 1) << 4) | (yskip - 1)); } - dev_dbg(&client->dev, "new physical left %u, top %u\n", left, top); + dev_dbg(&client->dev, "new physical left %u, top %u\n", + rect->left, rect->top); /* The caller provides a supported format, as guaranteed by * icd->try_fmt_cap(), soc_camera_s_crop() and soc_camera_cropcap() */ if (ret >= 0) - ret = reg_write(client, MT9T031_COLUMN_START, left); + ret = reg_write(client, MT9T031_COLUMN_START, rect->left); if (ret >= 0) - ret = reg_write(client, MT9T031_ROW_START, top); + ret = reg_write(client, MT9T031_ROW_START, rect->top); if (ret >= 0) - ret = reg_write(client, MT9T031_WINDOW_WIDTH, width - 1); + ret = reg_write(client, MT9T031_WINDOW_WIDTH, rect->width - 1); if (ret >= 0) ret = reg_write(client, MT9T031_WINDOW_HEIGHT, - height + icd->y_skip_top - 1); + rect->height + icd->y_skip_top - 1); if (ret >= 0 && mt9t031->autoexposure) { - ret = set_shutter(client, height + icd->y_skip_top + vblank); + ret = set_shutter(client, + rect->height + icd->y_skip_top + vblank); if (ret >= 0) { const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank; const struct v4l2_queryctrl *qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE); - icd->exposure = (shutter_max / 2 + (height + + icd->exposure = (shutter_max / 2 + (rect->height + icd->y_skip_top + vblank - 1) * (qctrl->maximum - qctrl->minimum)) / shutter_max + qctrl->minimum; @@ -318,27 +333,72 @@ static int mt9t031_set_params(struct soc_camera_device *icd, if (ret >= 0) ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 1); + if (ret >= 0) { + mt9t031->rect = *rect; + mt9t031->xskip = xskip; + mt9t031->yskip = yskip; + } + return ret < 0 ? ret : 0; } static int mt9t031_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; + struct v4l2_rect rect = a->c; struct i2c_client *client = sd->priv; struct mt9t031 *mt9t031 = to_mt9t031(client); struct soc_camera_device *icd = client->dev.platform_data; - /* Make sure we don't exceed sensor limits */ - if (rect->left + rect->width > icd->rect_max.left + icd->rect_max.width) - rect->left = icd->rect_max.width + icd->rect_max.left - - rect->width; + rect.width = ALIGN(rect.width, 2); + rect.height = ALIGN(rect.height, 2); + + soc_camera_limit_side(&rect.left, &rect.width, + MT9T031_COLUMN_SKIP, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH); + + soc_camera_limit_side(&rect.top, &rect.height, + MT9T031_ROW_SKIP, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT); + + return mt9t031_set_params(icd, &rect, mt9t031->xskip, mt9t031->yskip); +} + +static int mt9t031_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = sd->priv; + struct mt9t031 *mt9t031 = to_mt9t031(client); + + a->c = mt9t031->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - if (rect->top + rect->height > icd->rect_max.height + icd->rect_max.top) - rect->top = icd->rect_max.height + icd->rect_max.top - - rect->height; + return 0; +} + +static int mt9t031_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = MT9T031_COLUMN_SKIP; + a->bounds.top = MT9T031_ROW_SKIP; + a->bounds.width = MT9T031_MAX_WIDTH; + a->bounds.height = MT9T031_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; - /* CROP - no change in scaling, or in limits */ - return mt9t031_set_params(icd, rect, mt9t031->xskip, mt9t031->yskip); + return 0; +} + +static int mt9t031_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) +{ + struct i2c_client *client = sd->priv; + struct mt9t031 *mt9t031 = to_mt9t031(client); + struct v4l2_pix_format *pix = &f->fmt.pix; + + pix->width = mt9t031->rect.width / mt9t031->xskip; + pix->height = mt9t031->rect.height / mt9t031->yskip; + pix->pixelformat = V4L2_PIX_FMT_SGRBG10; + pix->field = V4L2_FIELD_NONE; + pix->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; } static int mt9t031_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) @@ -346,40 +406,25 @@ static int mt9t031_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) struct i2c_client *client = sd->priv; struct mt9t031 *mt9t031 = to_mt9t031(client); struct soc_camera_device *icd = client->dev.platform_data; - int ret; + struct v4l2_pix_format *pix = &f->fmt.pix; u16 xskip, yskip; - struct v4l2_rect rect = { - .left = icd->rect_current.left, - .top = icd->rect_current.top, - .width = f->fmt.pix.width, - .height = f->fmt.pix.height, - }; + struct v4l2_rect rect = mt9t031->rect; /* - * try_fmt has put rectangle within limits. - * S_FMT - use binning and skipping for scaling, recalculate - * limits, used for cropping + * try_fmt has put width and height within limits. + * S_FMT: use binning and skipping for scaling */ - /* Is this more optimal than just a division? */ - for (xskip = 8; xskip > 1; xskip--) - if (rect.width * xskip <= MT9T031_MAX_WIDTH) - break; - - for (yskip = 8; yskip > 1; yskip--) - if (rect.height * yskip <= MT9T031_MAX_HEIGHT) - break; - - recalculate_limits(icd, xskip, yskip); - - ret = mt9t031_set_params(icd, &rect, xskip, yskip); - if (!ret) { - mt9t031->xskip = xskip; - mt9t031->yskip = yskip; - } + xskip = mt9t031_skip(&rect.width, pix->width, MT9T031_MAX_WIDTH); + yskip = mt9t031_skip(&rect.height, pix->height, MT9T031_MAX_HEIGHT); - return ret; + /* mt9t031_set_params() doesn't change width and height */ + return mt9t031_set_params(icd, &rect, xskip, yskip); } +/* + * If a user window larger than sensor window is requested, we'll increase the + * sensor window. + */ static int mt9t031_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) { struct v4l2_pix_format *pix = &f->fmt.pix; @@ -620,12 +665,12 @@ static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) if (ctrl->value) { const u16 vblank = MT9T031_VERTICAL_BLANK; const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank; - if (set_shutter(client, icd->rect_current.height + + if (set_shutter(client, mt9t031->rect.height + icd->y_skip_top + vblank) < 0) return -EIO; qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE); icd->exposure = (shutter_max / 2 + - (icd->rect_current.height + + (mt9t031->rect.height + icd->y_skip_top + vblank - 1) * (qctrl->maximum - qctrl->minimum)) / shutter_max + qctrl->minimum; @@ -645,12 +690,6 @@ static int mt9t031_video_probe(struct i2c_client *client) struct mt9t031 *mt9t031 = to_mt9t031(client); s32 data; - /* We must have a parent by now. And it cannot be a wrong one. - * So this entire test is completely redundant. */ - if (!icd->dev.parent || - to_soc_camera_host(icd->dev.parent)->nr != icd->iface) - return -ENODEV; - /* Enable the chip */ data = reg_write(client, MT9T031_CHIP_ENABLE, 1); dev_dbg(&client->dev, "write: %d\n", data); @@ -688,8 +727,11 @@ static struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = { static struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = { .s_stream = mt9t031_s_stream, .s_fmt = mt9t031_s_fmt, + .g_fmt = mt9t031_g_fmt, .try_fmt = mt9t031_try_fmt, .s_crop = mt9t031_s_crop, + .g_crop = mt9t031_g_crop, + .cropcap = mt9t031_cropcap, }; static struct v4l2_subdev_ops mt9t031_subdev_ops = { @@ -731,15 +773,13 @@ static int mt9t031_probe(struct i2c_client *client, /* Second stage probe - when a capture adapter is there */ icd->ops = &mt9t031_ops; - icd->rect_max.left = MT9T031_COLUMN_SKIP; - icd->rect_max.top = MT9T031_ROW_SKIP; - icd->rect_current.left = icd->rect_max.left; - icd->rect_current.top = icd->rect_max.top; - icd->width_min = MT9T031_MIN_WIDTH; - icd->rect_max.width = MT9T031_MAX_WIDTH; - icd->height_min = MT9T031_MIN_HEIGHT; - icd->rect_max.height = MT9T031_MAX_HEIGHT; icd->y_skip_top = 0; + + mt9t031->rect.left = MT9T031_COLUMN_SKIP; + mt9t031->rect.top = MT9T031_ROW_SKIP; + mt9t031->rect.width = MT9T031_MAX_WIDTH; + mt9t031->rect.height = MT9T031_MAX_HEIGHT; + /* Simulated autoexposure. If enabled, we calculate shutter width * ourselves in the driver based on vertical blanking and frame width */ mt9t031->autoexposure = 1; diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index ab196542528..35ea0ddd071 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -55,6 +55,13 @@ MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\""); /* Progressive scan, master, defaults */ #define MT9V022_CHIP_CONTROL_DEFAULT 0x188 +#define MT9V022_MAX_WIDTH 752 +#define MT9V022_MAX_HEIGHT 480 +#define MT9V022_MIN_WIDTH 48 +#define MT9V022_MIN_HEIGHT 32 +#define MT9V022_COLUMN_SKIP 1 +#define MT9V022_ROW_SKIP 4 + static const struct soc_camera_data_format mt9v022_colour_formats[] = { /* Order important: first natively supported, * second supported with a GPIO extender */ @@ -86,6 +93,8 @@ static const struct soc_camera_data_format mt9v022_monochrome_formats[] = { struct mt9v022 { struct v4l2_subdev subdev; + struct v4l2_rect rect; /* Sensor window */ + __u32 fourcc; int model; /* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */ u16 chip_control; }; @@ -250,44 +259,101 @@ static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd) static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; struct i2c_client *client = sd->priv; + struct mt9v022 *mt9v022 = to_mt9v022(client); + struct v4l2_rect rect = a->c; struct soc_camera_device *icd = client->dev.platform_data; int ret; + /* Bayer format - even size lengths */ + if (mt9v022->fourcc == V4L2_PIX_FMT_SBGGR8 || + mt9v022->fourcc == V4L2_PIX_FMT_SBGGR16) { + rect.width = ALIGN(rect.width, 2); + rect.height = ALIGN(rect.height, 2); + /* Let the user play with the starting pixel */ + } + + soc_camera_limit_side(&rect.left, &rect.width, + MT9V022_COLUMN_SKIP, MT9V022_MIN_WIDTH, MT9V022_MAX_WIDTH); + + soc_camera_limit_side(&rect.top, &rect.height, + MT9V022_ROW_SKIP, MT9V022_MIN_HEIGHT, MT9V022_MAX_HEIGHT); + /* Like in example app. Contradicts the datasheet though */ ret = reg_read(client, MT9V022_AEC_AGC_ENABLE); if (ret >= 0) { if (ret & 1) /* Autoexposure */ ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, - rect->height + icd->y_skip_top + 43); + rect.height + icd->y_skip_top + 43); else ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, - rect->height + icd->y_skip_top + 43); + rect.height + icd->y_skip_top + 43); } /* Setup frame format: defaults apart from width and height */ if (!ret) - ret = reg_write(client, MT9V022_COLUMN_START, rect->left); + ret = reg_write(client, MT9V022_COLUMN_START, rect.left); if (!ret) - ret = reg_write(client, MT9V022_ROW_START, rect->top); + ret = reg_write(client, MT9V022_ROW_START, rect.top); if (!ret) /* Default 94, Phytec driver says: * "width + horizontal blank >= 660" */ ret = reg_write(client, MT9V022_HORIZONTAL_BLANKING, - rect->width > 660 - 43 ? 43 : - 660 - rect->width); + rect.width > 660 - 43 ? 43 : + 660 - rect.width); if (!ret) ret = reg_write(client, MT9V022_VERTICAL_BLANKING, 45); if (!ret) - ret = reg_write(client, MT9V022_WINDOW_WIDTH, rect->width); + ret = reg_write(client, MT9V022_WINDOW_WIDTH, rect.width); if (!ret) ret = reg_write(client, MT9V022_WINDOW_HEIGHT, - rect->height + icd->y_skip_top); + rect.height + icd->y_skip_top); if (ret < 0) return ret; - dev_dbg(&client->dev, "Frame %ux%u pixel\n", rect->width, rect->height); + dev_dbg(&client->dev, "Frame %ux%u pixel\n", rect.width, rect.height); + + mt9v022->rect = rect; + + return 0; +} + +static int mt9v022_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = sd->priv; + struct mt9v022 *mt9v022 = to_mt9v022(client); + + a->c = mt9v022->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int mt9v022_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = MT9V022_COLUMN_SKIP; + a->bounds.top = MT9V022_ROW_SKIP; + a->bounds.width = MT9V022_MAX_WIDTH; + a->bounds.height = MT9V022_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int mt9v022_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) +{ + struct i2c_client *client = sd->priv; + struct mt9v022 *mt9v022 = to_mt9v022(client); + struct v4l2_pix_format *pix = &f->fmt.pix; + + pix->width = mt9v022->rect.width; + pix->height = mt9v022->rect.height; + pix->pixelformat = mt9v022->fourcc; + pix->field = V4L2_FIELD_NONE; + pix->colorspace = V4L2_COLORSPACE_SRGB; return 0; } @@ -296,16 +362,16 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) { struct i2c_client *client = sd->priv; struct mt9v022 *mt9v022 = to_mt9v022(client); - struct soc_camera_device *icd = client->dev.platform_data; struct v4l2_pix_format *pix = &f->fmt.pix; struct v4l2_crop a = { .c = { - .left = icd->rect_current.left, - .top = icd->rect_current.top, + .left = mt9v022->rect.left, + .top = mt9v022->rect.top, .width = pix->width, .height = pix->height, }, }; + int ret; /* The caller provides a supported format, as verified per call to * icd->try_fmt(), datawidth is from our supported format list */ @@ -328,7 +394,14 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) } /* No support for scaling on this camera, just crop. */ - return mt9v022_s_crop(sd, &a); + ret = mt9v022_s_crop(sd, &a); + if (!ret) { + pix->width = mt9v022->rect.width; + pix->height = mt9v022->rect.height; + mt9v022->fourcc = pix->pixelformat; + } + + return ret; } static int mt9v022_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) @@ -336,10 +409,13 @@ static int mt9v022_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) struct i2c_client *client = sd->priv; struct soc_camera_device *icd = client->dev.platform_data; struct v4l2_pix_format *pix = &f->fmt.pix; + int align = pix->pixelformat == V4L2_PIX_FMT_SBGGR8 || + pix->pixelformat == V4L2_PIX_FMT_SBGGR16; - v4l_bound_align_image(&pix->width, 48, 752, 2 /* ? */, - &pix->height, 32 + icd->y_skip_top, - 480 + icd->y_skip_top, 0, 0); + v4l_bound_align_image(&pix->width, MT9V022_MIN_WIDTH, + MT9V022_MAX_WIDTH, align, + &pix->height, MT9V022_MIN_HEIGHT + icd->y_skip_top, + MT9V022_MAX_HEIGHT + icd->y_skip_top, align, 0); return 0; } @@ -669,6 +745,8 @@ static int mt9v022_video_probe(struct soc_camera_device *icd, if (flags & SOCAM_DATAWIDTH_8) icd->num_formats++; + mt9v022->fourcc = icd->formats->fourcc; + dev_info(&client->dev, "Detected a MT9V022 chip ID %x, %s sensor\n", data, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ? "monochrome" : "colour"); @@ -679,10 +757,9 @@ ei2c: static void mt9v022_video_remove(struct soc_camera_device *icd) { - struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); struct soc_camera_link *icl = to_soc_camera_link(icd); - dev_dbg(&client->dev, "Video %x removed: %p, %p\n", client->addr, + dev_dbg(&icd->dev, "Video removed: %p, %p\n", icd->dev.parent, icd->vdev); if (icl->free_bus) icl->free_bus(icl); @@ -701,8 +778,11 @@ static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = { static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = { .s_stream = mt9v022_s_stream, .s_fmt = mt9v022_s_fmt, + .g_fmt = mt9v022_g_fmt, .try_fmt = mt9v022_try_fmt, .s_crop = mt9v022_s_crop, + .g_crop = mt9v022_g_crop, + .cropcap = mt9v022_cropcap, }; static struct v4l2_subdev_ops mt9v022_subdev_ops = { @@ -745,16 +825,13 @@ static int mt9v022_probe(struct i2c_client *client, mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT; icd->ops = &mt9v022_ops; - icd->rect_max.left = 1; - icd->rect_max.top = 4; - icd->rect_max.width = 752; - icd->rect_max.height = 480; - icd->rect_current.left = 1; - icd->rect_current.top = 4; - icd->width_min = 48; - icd->height_min = 32; icd->y_skip_top = 1; + mt9v022->rect.left = MT9V022_COLUMN_SKIP; + mt9v022->rect.top = MT9V022_ROW_SKIP; + mt9v022->rect.width = MT9V022_MAX_WIDTH; + mt9v022->rect.height = MT9V022_MAX_HEIGHT; + ret = mt9v022_video_probe(icd, client); if (ret) { icd->ops = NULL; diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index 1f1324a1d49..3875483ab9d 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -126,7 +126,7 @@ static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, { struct soc_camera_device *icd = vq->priv_data; - *size = icd->rect_current.width * icd->rect_current.height * + *size = icd->user_width * icd->user_height * ((icd->current_fmt->depth + 7) >> 3); if (!*count) @@ -178,12 +178,12 @@ static int mx1_videobuf_prepare(struct videobuf_queue *vq, buf->inwork = 1; if (buf->fmt != icd->current_fmt || - vb->width != icd->rect_current.width || - vb->height != icd->rect_current.height || + vb->width != icd->user_width || + vb->height != icd->user_height || vb->field != field) { buf->fmt = icd->current_fmt; - vb->width = icd->rect_current.width; - vb->height = icd->rect_current.height; + vb->width = icd->user_width; + vb->height = icd->user_height; vb->field = field; vb->state = VIDEOBUF_NEEDS_INIT; } diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index d5b51e9900b..dff2e5e2d8c 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -220,7 +220,7 @@ static int mx3_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, if (!mx3_cam->idmac_channel[0]) return -EINVAL; - *size = icd->rect_current.width * icd->rect_current.height * bpp; + *size = icd->user_width * icd->user_height * bpp; if (!*count) *count = 32; @@ -241,7 +241,7 @@ static int mx3_videobuf_prepare(struct videobuf_queue *vq, struct mx3_camera_buffer *buf = container_of(vb, struct mx3_camera_buffer, vb); /* current_fmt _must_ always be set */ - size_t new_size = icd->rect_current.width * icd->rect_current.height * + size_t new_size = icd->user_width * icd->user_height * ((icd->current_fmt->depth + 7) >> 3); int ret; @@ -251,12 +251,12 @@ static int mx3_videobuf_prepare(struct videobuf_queue *vq, */ if (buf->fmt != icd->current_fmt || - vb->width != icd->rect_current.width || - vb->height != icd->rect_current.height || + vb->width != icd->user_width || + vb->height != icd->user_height || vb->field != field) { buf->fmt = icd->current_fmt; - vb->width = icd->rect_current.width; - vb->height = icd->rect_current.height; + vb->width = icd->user_width; + vb->height = icd->user_height; vb->field = field; if (vb->state != VIDEOBUF_NEEDS_INIT) free_buffer(vq, buf); @@ -354,9 +354,9 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq, /* This is the configuration of one sg-element */ video->out_pixel_fmt = fourcc_to_ipu_pix(data_fmt->fourcc); - video->out_width = icd->rect_current.width; - video->out_height = icd->rect_current.height; - video->out_stride = icd->rect_current.width; + video->out_width = icd->user_width; + video->out_height = icd->user_height; + video->out_stride = icd->user_width; #ifdef DEBUG /* helps to see what DMA actually has written */ @@ -541,7 +541,7 @@ static bool channel_change_requested(struct soc_camera_device *icd, /* Do buffers have to be re-allocated or channel re-configured? */ return ichan && rect->width * rect->height > - icd->rect_current.width * icd->rect_current.height; + icd->user_width * icd->user_height; } static int test_platform_param(struct mx3_camera_dev *mx3_cam, @@ -589,8 +589,8 @@ static int test_platform_param(struct mx3_camera_dev *mx3_cam, *flags |= SOCAM_DATAWIDTH_4; break; default: - dev_info(mx3_cam->soc_host.v4l2_dev.dev, "Unsupported bus width %d\n", - buswidth); + dev_warn(mx3_cam->soc_host.v4l2_dev.dev, + "Unsupported bus width %d\n", buswidth); return -EINVAL; } @@ -605,8 +605,7 @@ static int mx3_camera_try_bus_param(struct soc_camera_device *icd, unsigned long bus_flags, camera_flags; int ret = test_platform_param(mx3_cam, depth, &bus_flags); - dev_dbg(icd->dev.parent, "requested bus width %d bit: %d\n", - depth, ret); + dev_dbg(icd->dev.parent, "request bus width %d bit: %d\n", depth, ret); if (ret < 0) return ret; @@ -727,13 +726,13 @@ passthrough: } static void configure_geometry(struct mx3_camera_dev *mx3_cam, - struct v4l2_rect *rect) + unsigned int width, unsigned int height) { u32 ctrl, width_field, height_field; /* Setup frame size - this cannot be changed on-the-fly... */ - width_field = rect->width - 1; - height_field = rect->height - 1; + width_field = width - 1; + height_field = height - 1; csi_reg_write(mx3_cam, width_field | (height_field << 16), CSI_SENS_FRM_SIZE); csi_reg_write(mx3_cam, width_field << 16, CSI_FLASH_STROBE_1); @@ -745,11 +744,6 @@ static void configure_geometry(struct mx3_camera_dev *mx3_cam, ctrl = csi_reg_read(mx3_cam, CSI_OUT_FRM_CTRL) & 0xffff0000; /* Sensor does the cropping */ csi_reg_write(mx3_cam, ctrl | 0 | (0 << 8), CSI_OUT_FRM_CTRL); - - /* - * No need to free resources here if we fail, we'll see if we need to - * do this next time we are called - */ } static int acquire_dma_channel(struct mx3_camera_dev *mx3_cam) @@ -786,6 +780,22 @@ static int acquire_dma_channel(struct mx3_camera_dev *mx3_cam) return 0; } +/* + * FIXME: learn to use stride != width, then we can keep stride properly aligned + * and support arbitrary (even) widths. + */ +static inline void stride_align(__s32 *width) +{ + if (((*width + 7) & ~7) < 4096) + *width = (*width + 7) & ~7; + else + *width = *width & ~7; +} + +/* + * As long as we don't implement host-side cropping and scaling, we can use + * default g_crop and cropcap from soc_camera.c + */ static int mx3_camera_set_crop(struct soc_camera_device *icd, struct v4l2_crop *a) { @@ -793,20 +803,51 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd, struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + struct v4l2_format f = {.type = V4L2_BUF_TYPE_VIDEO_CAPTURE}; + struct v4l2_pix_format *pix = &f.fmt.pix; + int ret; - /* - * We now know pixel formats and can decide upon DMA-channel(s) - * So far only direct camera-to-memory is supported - */ - if (channel_change_requested(icd, rect)) { - int ret = acquire_dma_channel(mx3_cam); + soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096); + soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096); + + ret = v4l2_subdev_call(sd, video, s_crop, a); + if (ret < 0) + return ret; + + /* The capture device might have changed its output */ + ret = v4l2_subdev_call(sd, video, g_fmt, &f); + if (ret < 0) + return ret; + + if (pix->width & 7) { + /* Ouch! We can only handle 8-byte aligned width... */ + stride_align(&pix->width); + ret = v4l2_subdev_call(sd, video, s_fmt, &f); if (ret < 0) return ret; } - configure_geometry(mx3_cam, rect); + if (pix->width != icd->user_width || pix->height != icd->user_height) { + /* + * We now know pixel formats and can decide upon DMA-channel(s) + * So far only direct camera-to-memory is supported + */ + if (channel_change_requested(icd, rect)) { + int ret = acquire_dma_channel(mx3_cam); + if (ret < 0) + return ret; + } - return v4l2_subdev_call(sd, video, s_crop, a); + configure_geometry(mx3_cam, pix->width, pix->height); + } + + dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n", + pix->width, pix->height); + + icd->user_width = pix->width; + icd->user_height = pix->height; + + return ret; } static int mx3_camera_set_fmt(struct soc_camera_device *icd, @@ -817,12 +858,6 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_subdev *sd = soc_camera_to_subdev(icd); const struct soc_camera_format_xlate *xlate; struct v4l2_pix_format *pix = &f->fmt.pix; - struct v4l2_rect rect = { - .left = icd->rect_current.left, - .top = icd->rect_current.top, - .width = pix->width, - .height = pix->height, - }; int ret; xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); @@ -832,6 +867,9 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd, return -EINVAL; } + stride_align(&pix->width); + dev_dbg(icd->dev.parent, "Set format %dx%d\n", pix->width, pix->height); + ret = acquire_dma_channel(mx3_cam); if (ret < 0) return ret; @@ -842,7 +880,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd, * mxc_v4l2_s_fmt() */ - configure_geometry(mx3_cam, &rect); + configure_geometry(mx3_cam, pix->width, pix->height); ret = v4l2_subdev_call(sd, video, s_fmt, f); if (!ret) { @@ -850,6 +888,8 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd, icd->current_fmt = xlate->host_fmt; } + dev_dbg(icd->dev.parent, "Sensor set %dx%d\n", pix->width, pix->height); + return ret; } diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c index bbf5331a2ea..776a91dcfbe 100644 --- a/drivers/media/video/ov772x.c +++ b/drivers/media/video/ov772x.c @@ -382,11 +382,10 @@ struct regval_list { }; struct ov772x_color_format { - char *name; - __u32 fourcc; - u8 dsp3; - u8 com3; - u8 com7; + const struct soc_camera_data_format *format; + u8 dsp3; + u8 com3; + u8 com7; }; struct ov772x_win_size { @@ -481,43 +480,43 @@ static const struct soc_camera_data_format ov772x_fmt_lists[] = { */ static const struct ov772x_color_format ov772x_cfmts[] = { { - SETFOURCC(YUYV), + .format = &ov772x_fmt_lists[0], .dsp3 = 0x0, .com3 = SWAP_YUV, .com7 = OFMT_YUV, }, { - SETFOURCC(YVYU), + .format = &ov772x_fmt_lists[1], .dsp3 = UV_ON, .com3 = SWAP_YUV, .com7 = OFMT_YUV, }, { - SETFOURCC(UYVY), + .format = &ov772x_fmt_lists[2], .dsp3 = 0x0, .com3 = 0x0, .com7 = OFMT_YUV, }, { - SETFOURCC(RGB555), + .format = &ov772x_fmt_lists[3], .dsp3 = 0x0, .com3 = SWAP_RGB, .com7 = FMT_RGB555 | OFMT_RGB, }, { - SETFOURCC(RGB555X), + .format = &ov772x_fmt_lists[4], .dsp3 = 0x0, .com3 = 0x0, .com7 = FMT_RGB555 | OFMT_RGB, }, { - SETFOURCC(RGB565), + .format = &ov772x_fmt_lists[5], .dsp3 = 0x0, .com3 = SWAP_RGB, .com7 = FMT_RGB565 | OFMT_RGB, }, { - SETFOURCC(RGB565X), + .format = &ov772x_fmt_lists[6], .dsp3 = 0x0, .com3 = 0x0, .com7 = FMT_RGB565 | OFMT_RGB, @@ -648,8 +647,8 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable) ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, 0); - dev_dbg(&client->dev, - "format %s, win %s\n", priv->fmt->name, priv->win->name); + dev_dbg(&client->dev, "format %s, win %s\n", + priv->fmt->format->name, priv->win->name); return 0; } @@ -818,7 +817,7 @@ static int ov772x_set_params(struct i2c_client *client, */ priv->fmt = NULL; for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) { - if (pixfmt == ov772x_cfmts[i].fourcc) { + if (pixfmt == ov772x_cfmts[i].format->fourcc) { priv->fmt = ov772x_cfmts + i; break; } @@ -955,6 +954,56 @@ ov772x_set_fmt_error: return ret; } +static int ov772x_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + a->c.left = 0; + a->c.top = 0; + a->c.width = VGA_WIDTH; + a->c.height = VGA_HEIGHT; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int ov772x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = VGA_WIDTH; + a->bounds.height = VGA_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int ov772x_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) +{ + struct i2c_client *client = sd->priv; + struct ov772x_priv *priv = to_ov772x(client); + struct v4l2_pix_format *pix = &f->fmt.pix; + + if (!priv->win || !priv->fmt) { + u32 width = VGA_WIDTH, height = VGA_HEIGHT; + int ret = ov772x_set_params(client, &width, &height, + V4L2_PIX_FMT_YUYV); + if (ret < 0) + return ret; + } + + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + pix->width = priv->win->width; + pix->height = priv->win->height; + pix->pixelformat = priv->fmt->format->fourcc; + pix->colorspace = priv->fmt->format->colorspace; + pix->field = V4L2_FIELD_NONE; + + return 0; +} + static int ov772x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) { struct i2c_client *client = sd->priv; @@ -1060,8 +1109,11 @@ static struct v4l2_subdev_core_ops ov772x_subdev_core_ops = { static struct v4l2_subdev_video_ops ov772x_subdev_video_ops = { .s_stream = ov772x_s_stream, + .g_fmt = ov772x_g_fmt, .s_fmt = ov772x_s_fmt, .try_fmt = ov772x_try_fmt, + .cropcap = ov772x_cropcap, + .g_crop = ov772x_g_crop, }; static struct v4l2_subdev_ops ov772x_subdev_ops = { @@ -1110,8 +1162,6 @@ static int ov772x_probe(struct i2c_client *client, v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops); icd->ops = &ov772x_ops; - icd->rect_max.width = MAX_WIDTH; - icd->rect_max.height = MAX_HEIGHT; ret = ov772x_video_probe(icd, client); if (ret) { diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 1fd6ef392a5..a19bb76e175 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -225,6 +225,10 @@ struct pxa_camera_dev { u32 save_cicr[5]; }; +struct pxa_cam { + unsigned long flags; +}; + static const char *pxa_cam_driver_description = "PXA_Camera"; static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ @@ -239,7 +243,7 @@ static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size); - *size = roundup(icd->rect_current.width * icd->rect_current.height * + *size = roundup(icd->user_width * icd->user_height * ((icd->current_fmt->depth + 7) >> 3), 8); if (0 == *count) @@ -443,12 +447,12 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq, buf->inwork = 1; if (buf->fmt != icd->current_fmt || - vb->width != icd->rect_current.width || - vb->height != icd->rect_current.height || + vb->width != icd->user_width || + vb->height != icd->user_height || vb->field != field) { buf->fmt = icd->current_fmt; - vb->width = icd->rect_current.width; - vb->height = icd->rect_current.height; + vb->width = icd->user_width; + vb->height = icd->user_height; vb->field = field; vb->state = VIDEOBUF_NEEDS_INIT; } @@ -839,7 +843,7 @@ static u32 mclk_get_divisor(struct platform_device *pdev, struct pxa_camera_dev *pcdev) { unsigned long mclk = pcdev->mclk; - struct device *dev = pcdev->soc_host.v4l2_dev.dev; + struct device *dev = &pdev->dev; u32 div; unsigned long lcdclk; @@ -1040,57 +1044,17 @@ static int test_platform_param(struct pxa_camera_dev *pcdev, return 0; } -static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) +static void pxa_camera_setup_cicr(struct soc_camera_device *icd, + unsigned long flags, __u32 pixfmt) { struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct pxa_camera_dev *pcdev = ici->priv; - unsigned long dw, bpp, bus_flags, camera_flags, common_flags; + unsigned long dw, bpp; u32 cicr0, cicr1, cicr2, cicr3, cicr4 = 0; - int ret = test_platform_param(pcdev, icd->buswidth, &bus_flags); - - if (ret < 0) - return ret; - - camera_flags = icd->ops->query_bus_param(icd); - - common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags); - if (!common_flags) - return -EINVAL; - - pcdev->channels = 1; - - /* Make choises, based on platform preferences */ - if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) && - (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) { - if (pcdev->platform_flags & PXA_CAMERA_HSP) - common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH; - else - common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW; - } - - if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) && - (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) { - if (pcdev->platform_flags & PXA_CAMERA_VSP) - common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH; - else - common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW; - } - - if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) && - (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) { - if (pcdev->platform_flags & PXA_CAMERA_PCP) - common_flags &= ~SOCAM_PCLK_SAMPLE_RISING; - else - common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING; - } - - ret = icd->ops->set_bus_param(icd, common_flags); - if (ret < 0) - return ret; /* Datawidth is now guaranteed to be equal to one of the three values. * We fix bit-per-pixel equal to data-width... */ - switch (common_flags & SOCAM_DATAWIDTH_MASK) { + switch (flags & SOCAM_DATAWIDTH_MASK) { case SOCAM_DATAWIDTH_10: dw = 4; bpp = 0x40; @@ -1111,18 +1075,18 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) cicr4 |= CICR4_PCLK_EN; if (pcdev->platform_flags & PXA_CAMERA_MCLK_EN) cicr4 |= CICR4_MCLK_EN; - if (common_flags & SOCAM_PCLK_SAMPLE_FALLING) + if (flags & SOCAM_PCLK_SAMPLE_FALLING) cicr4 |= CICR4_PCP; - if (common_flags & SOCAM_HSYNC_ACTIVE_LOW) + if (flags & SOCAM_HSYNC_ACTIVE_LOW) cicr4 |= CICR4_HSP; - if (common_flags & SOCAM_VSYNC_ACTIVE_LOW) + if (flags & SOCAM_VSYNC_ACTIVE_LOW) cicr4 |= CICR4_VSP; cicr0 = __raw_readl(pcdev->base + CICR0); if (cicr0 & CICR0_ENB) __raw_writel(cicr0 & ~CICR0_ENB, pcdev->base + CICR0); - cicr1 = CICR1_PPL_VAL(icd->rect_current.width - 1) | bpp | dw; + cicr1 = CICR1_PPL_VAL(icd->user_width - 1) | bpp | dw; switch (pixfmt) { case V4L2_PIX_FMT_YUV422P: @@ -1151,7 +1115,7 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) } cicr2 = 0; - cicr3 = CICR3_LPF_VAL(icd->rect_current.height - 1) | + cicr3 = CICR3_LPF_VAL(icd->user_height - 1) | CICR3_BFW_VAL(min((unsigned short)255, icd->y_skip_top)); cicr4 |= pcdev->mclk_divisor; @@ -1165,6 +1129,59 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) CICR0_SIM_MP : (CICR0_SL_CAP_EN | CICR0_SIM_SP)); cicr0 |= CICR0_DMAEN | CICR0_IRQ_MASK; __raw_writel(cicr0, pcdev->base + CICR0); +} + +static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + unsigned long bus_flags, camera_flags, common_flags; + int ret = test_platform_param(pcdev, icd->buswidth, &bus_flags); + struct pxa_cam *cam = icd->host_priv; + + if (ret < 0) + return ret; + + camera_flags = icd->ops->query_bus_param(icd); + + common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags); + if (!common_flags) + return -EINVAL; + + pcdev->channels = 1; + + /* Make choises, based on platform preferences */ + if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) && + (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) { + if (pcdev->platform_flags & PXA_CAMERA_HSP) + common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH; + else + common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW; + } + + if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) && + (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) { + if (pcdev->platform_flags & PXA_CAMERA_VSP) + common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH; + else + common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW; + } + + if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) && + (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) { + if (pcdev->platform_flags & PXA_CAMERA_PCP) + common_flags &= ~SOCAM_PCLK_SAMPLE_RISING; + else + common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING; + } + + cam->flags = common_flags; + + ret = icd->ops->set_bus_param(icd, common_flags); + if (ret < 0) + return ret; + + pxa_camera_setup_cicr(icd, common_flags, pixfmt); return 0; } @@ -1230,6 +1247,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx, { struct device *dev = icd->dev.parent; int formats = 0, buswidth, ret; + struct pxa_cam *cam; buswidth = required_buswidth(icd->formats + idx); @@ -1240,6 +1258,16 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx, if (ret < 0) return 0; + if (!icd->host_priv) { + cam = kzalloc(sizeof(*cam), GFP_KERNEL); + if (!cam) + return -ENOMEM; + + icd->host_priv = cam; + } else { + cam = icd->host_priv; + } + switch (icd->formats[idx].fourcc) { case V4L2_PIX_FMT_UYVY: formats++; @@ -1284,6 +1312,19 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx, return formats; } +static void pxa_camera_put_formats(struct soc_camera_device *icd) +{ + kfree(icd->host_priv); + icd->host_priv = NULL; +} + +static int pxa_camera_check_frame(struct v4l2_pix_format *pix) +{ + /* limit to pxa hardware capabilities */ + return pix->height < 32 || pix->height > 2048 || pix->width < 48 || + pix->width > 2048 || (pix->width & 0x01); +} + static int pxa_camera_set_crop(struct soc_camera_device *icd, struct v4l2_crop *a) { @@ -1296,6 +1337,9 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd, .master_clock = pcdev->mclk, .pixel_clock_max = pcdev->ciclk / 4, }; + struct v4l2_format f; + struct v4l2_pix_format *pix = &f.fmt.pix, pix_tmp; + struct pxa_cam *cam = icd->host_priv; int ret; /* If PCLK is used to latch data from the sensor, check sense */ @@ -1309,7 +1353,37 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd, if (ret < 0) { dev_warn(dev, "Failed to crop to %ux%u@%u:%u\n", rect->width, rect->height, rect->left, rect->top); - } else if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) { + return ret; + } + + f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + ret = v4l2_subdev_call(sd, video, g_fmt, &f); + if (ret < 0) + return ret; + + pix_tmp = *pix; + if (pxa_camera_check_frame(pix)) { + /* + * Camera cropping produced a frame beyond our capabilities. + * FIXME: just extract a subframe, that we can process. + */ + v4l_bound_align_image(&pix->width, 48, 2048, 1, + &pix->height, 32, 2048, 0, + icd->current_fmt->fourcc == V4L2_PIX_FMT_YUV422P ? + 4 : 0); + ret = v4l2_subdev_call(sd, video, s_fmt, &f); + if (ret < 0) + return ret; + + if (pxa_camera_check_frame(pix)) { + dev_warn(icd->dev.parent, + "Inconsistent state. Use S_FMT to repair\n"); + return -EINVAL; + } + } + + if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) { if (sense.pixel_clock > sense.pixel_clock_max) { dev_err(dev, "pixel clock %lu set by the camera too high!", @@ -1319,6 +1393,11 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd, recalculate_fifo_timeout(pcdev, sense.pixel_clock); } + icd->user_width = pix->width; + icd->user_height = pix->height; + + pxa_camera_setup_cicr(icd, cam->flags, icd->current_fmt->fourcc); + return ret; } @@ -1359,6 +1438,11 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, if (ret < 0) { dev_warn(dev, "Failed to configure for format %x\n", pix->pixelformat); + } else if (pxa_camera_check_frame(pix)) { + dev_warn(dev, + "Camera driver produced an unsupported frame %dx%d\n", + pix->width, pix->height); + ret = -EINVAL; } else if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) { if (sense.pixel_clock > sense.pixel_clock_max) { dev_err(dev, @@ -1402,7 +1486,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd, */ v4l_bound_align_image(&pix->width, 48, 2048, 1, &pix->height, 32, 2048, 0, - xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0); + pixfmt == V4L2_PIX_FMT_YUV422P ? 4 : 0); pix->bytesperline = pix->width * DIV_ROUND_UP(xlate->host_fmt->depth, 8); @@ -1412,7 +1496,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd, pix->pixelformat = xlate->cam_fmt->fourcc; /* limit to sensor capabilities */ ret = v4l2_subdev_call(sd, video, try_fmt, f); - pix->pixelformat = xlate->host_fmt->fourcc; + pix->pixelformat = pixfmt; field = pix->field; @@ -1525,6 +1609,7 @@ static struct soc_camera_host_ops pxa_soc_camera_host_ops = { .resume = pxa_camera_resume, .set_crop = pxa_camera_set_crop, .get_formats = pxa_camera_get_formats, + .put_formats = pxa_camera_put_formats, .set_fmt = pxa_camera_set_fmt, .try_fmt = pxa_camera_try_fmt, .init_videobuf = pxa_camera_init_videobuf, diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 3457bababd3..5ab7c5aefd6 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -74,6 +74,13 @@ #define CDBYR2 0x98 /* Capture data bottom-field address Y register 2 */ #define CDBCR2 0x9c /* Capture data bottom-field address C register 2 */ +#undef DEBUG_GEOMETRY +#ifdef DEBUG_GEOMETRY +#define dev_geo dev_info +#else +#define dev_geo dev_dbg +#endif + /* per video frame buffer */ struct sh_mobile_ceu_buffer { struct videobuf_buffer vb; /* v4l buffer must be first */ @@ -103,8 +110,9 @@ struct sh_mobile_ceu_dev { }; struct sh_mobile_ceu_cam { - struct v4l2_rect camera_rect; - struct v4l2_rect camera_max; + struct v4l2_rect ceu_rect; + unsigned int cam_width; + unsigned int cam_height; const struct soc_camera_data_format *extra_fmt; const struct soc_camera_data_format *camera_fmt; }; @@ -156,7 +164,7 @@ static int sh_mobile_ceu_videobuf_setup(struct videobuf_queue *vq, struct sh_mobile_ceu_dev *pcdev = ici->priv; int bytes_per_pixel = (icd->current_fmt->depth + 7) >> 3; - *size = PAGE_ALIGN(icd->rect_current.width * icd->rect_current.height * + *size = PAGE_ALIGN(icd->user_width * icd->user_height * bytes_per_pixel); if (0 == *count) @@ -176,8 +184,9 @@ static void free_buffer(struct videobuf_queue *vq, struct sh_mobile_ceu_buffer *buf) { struct soc_camera_device *icd = vq->priv_data; + struct device *dev = icd->dev.parent; - dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %zd\n", __func__, + dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__, &buf->vb, buf->vb.baddr, buf->vb.bsize); if (in_interrupt()) @@ -185,7 +194,7 @@ static void free_buffer(struct videobuf_queue *vq, videobuf_waiton(&buf->vb, 0, 0); videobuf_dma_contig_free(vq, &buf->vb); - dev_dbg(icd->dev.parent, "%s freed\n", __func__); + dev_dbg(dev, "%s freed\n", __func__); buf->vb.state = VIDEOBUF_NEEDS_INIT; } @@ -216,7 +225,7 @@ static void sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev) phys_addr_top = videobuf_to_dma_contig(pcdev->active); ceu_write(pcdev, CDAYR, phys_addr_top); if (pcdev->is_interlaced) { - phys_addr_bottom = phys_addr_top + icd->rect_current.width; + phys_addr_bottom = phys_addr_top + icd->user_width; ceu_write(pcdev, CDBYR, phys_addr_bottom); } @@ -225,12 +234,12 @@ static void sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev) case V4L2_PIX_FMT_NV21: case V4L2_PIX_FMT_NV16: case V4L2_PIX_FMT_NV61: - phys_addr_top += icd->rect_current.width * - icd->rect_current.height; + phys_addr_top += icd->user_width * + icd->user_height; ceu_write(pcdev, CDACR, phys_addr_top); if (pcdev->is_interlaced) { phys_addr_bottom = phys_addr_top + - icd->rect_current.width; + icd->user_width; ceu_write(pcdev, CDBCR, phys_addr_bottom); } } @@ -264,12 +273,12 @@ static int sh_mobile_ceu_videobuf_prepare(struct videobuf_queue *vq, BUG_ON(NULL == icd->current_fmt); if (buf->fmt != icd->current_fmt || - vb->width != icd->rect_current.width || - vb->height != icd->rect_current.height || + vb->width != icd->user_width || + vb->height != icd->user_height || vb->field != field) { buf->fmt = icd->current_fmt; - vb->width = icd->rect_current.width; - vb->height = icd->rect_current.height; + vb->width = icd->user_width; + vb->height = icd->user_height; vb->field = field; vb->state = VIDEOBUF_NEEDS_INIT; } @@ -451,18 +460,6 @@ static unsigned int size_dst(unsigned int src, unsigned int scale) mant_pre * 4096 / scale + 1; } -static unsigned int size_src(unsigned int dst, unsigned int scale) -{ - unsigned int mant_pre = scale >> 12, tmp; - if (!dst || !scale) - return dst; - for (tmp = ((dst - 1) * scale + 2048 * mant_pre) / 4096 + 1; - size_dst(tmp, scale) < dst; - tmp++) - ; - return tmp; -} - static u16 calc_scale(unsigned int src, unsigned int *dst) { u16 scale; @@ -482,65 +479,46 @@ static u16 calc_scale(unsigned int src, unsigned int *dst) /* rect is guaranteed to not exceed the scaled camera rectangle */ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd, - struct v4l2_rect *rect) + unsigned int out_width, + unsigned int out_height) { struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct sh_mobile_ceu_cam *cam = icd->host_priv; + struct v4l2_rect *rect = &cam->ceu_rect; struct sh_mobile_ceu_dev *pcdev = ici->priv; - int width, height, cfszr_width, cdwdr_width, in_width, in_height; - unsigned int left_offset, top_offset, left, top; - unsigned int hscale = pcdev->cflcr & 0xffff; - unsigned int vscale = (pcdev->cflcr >> 16) & 0xffff; + unsigned int height, width, cdwdr_width, in_width, in_height; + unsigned int left_offset, top_offset; u32 camor; - /* Switch to the camera scale */ - left = size_src(rect->left, hscale); - top = size_src(rect->top, vscale); - - dev_dbg(icd->dev.parent, "Left %u * 0x%x = %u, top %u * 0x%x = %u\n", - rect->left, hscale, left, rect->top, vscale, top); - - if (left > cam->camera_rect.left) { - left_offset = left - cam->camera_rect.left; - } else { - left_offset = 0; - left = cam->camera_rect.left; - } - - if (top > cam->camera_rect.top) { - top_offset = top - cam->camera_rect.top; - } else { - top_offset = 0; - top = cam->camera_rect.top; - } + dev_dbg(icd->dev.parent, "Crop %ux%u@%u:%u\n", + rect->width, rect->height, rect->left, rect->top); - dev_dbg(icd->dev.parent, "New left %u, top %u, offsets %u:%u\n", - rect->left, rect->top, left_offset, top_offset); + left_offset = rect->left; + top_offset = rect->top; if (pcdev->image_mode) { - width = rect->width; - in_width = cam->camera_rect.width; + in_width = rect->width; if (!pcdev->is_16bit) { - width *= 2; in_width *= 2; left_offset *= 2; } - cfszr_width = cdwdr_width = rect->width; + width = cdwdr_width = out_width; } else { unsigned int w_factor = (icd->current_fmt->depth + 7) >> 3; + + width = out_width * w_factor / 2; + if (!pcdev->is_16bit) w_factor *= 2; - width = rect->width * w_factor / 2; - in_width = cam->camera_rect.width * w_factor / 2; + in_width = rect->width * w_factor / 2; left_offset = left_offset * w_factor / 2; - cfszr_width = pcdev->is_16bit ? width : width / 2; - cdwdr_width = pcdev->is_16bit ? width * 2 : width; + cdwdr_width = width * 2; } - height = rect->height; - in_height = cam->camera_rect.height; + height = out_height; + in_height = rect->height; if (pcdev->is_interlaced) { height /= 2; in_height /= 2; @@ -548,10 +526,17 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd, cdwdr_width *= 2; } + /* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */ camor = left_offset | (top_offset << 16); + + dev_geo(icd->dev.parent, + "CAMOR 0x%x, CAPWR 0x%x, CFSZR 0x%x, CDWDR 0x%x\n", camor, + (in_height << 16) | in_width, (height << 16) | width, + cdwdr_width); + ceu_write(pcdev, CAMOR, camor); ceu_write(pcdev, CAPWR, (in_height << 16) | in_width); - ceu_write(pcdev, CFSZR, (height << 16) | cfszr_width); + ceu_write(pcdev, CFSZR, (height << 16) | width); ceu_write(pcdev, CDWDR, cdwdr_width); } @@ -663,8 +648,8 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, ceu_write(pcdev, CAPCR, 0x00300000); ceu_write(pcdev, CAIFR, pcdev->is_interlaced ? 0x101 : 0); + sh_mobile_ceu_set_rect(icd, icd->user_width, icd->user_height); mdelay(1); - sh_mobile_ceu_set_rect(icd, &icd->rect_current); ceu_write(pcdev, CFLCR, pcdev->cflcr); @@ -687,11 +672,10 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, ceu_write(pcdev, CDOCR, value); ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */ - dev_dbg(icd->dev.parent, "S_FMT successful for %c%c%c%c %ux%u@%u:%u\n", + dev_dbg(icd->dev.parent, "S_FMT successful for %c%c%c%c %ux%u\n", pixfmt & 0xff, (pixfmt >> 8) & 0xff, (pixfmt >> 16) & 0xff, (pixfmt >> 24) & 0xff, - icd->rect_current.width, icd->rect_current.height, - icd->rect_current.left, icd->rect_current.top); + icd->user_width, icd->user_height); capture_restore(pcdev, capsr); @@ -744,6 +728,7 @@ static const struct soc_camera_data_format sh_mobile_ceu_formats[] = { static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx, struct soc_camera_format_xlate *xlate) { + struct device *dev = icd->dev.parent; int ret, k, n; int formats = 0; struct sh_mobile_ceu_cam *cam; @@ -758,7 +743,6 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx, return -ENOMEM; icd->host_priv = cam; - cam->camera_max = icd->rect_max; } else { cam = icd->host_priv; } @@ -793,8 +777,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx, xlate->cam_fmt = icd->formats + idx; xlate->buswidth = icd->formats[idx].depth; xlate++; - dev_dbg(icd->dev.parent, - "Providing format %s using %s\n", + dev_dbg(dev, "Providing format %s using %s\n", sh_mobile_ceu_formats[k].name, icd->formats[idx].name); } @@ -807,7 +790,7 @@ add_single_format: xlate->cam_fmt = icd->formats + idx; xlate->buswidth = icd->formats[idx].depth; xlate++; - dev_dbg(icd->dev.parent, + dev_dbg(dev, "Providing format %s in pass-through mode\n", icd->formats[idx].name); } @@ -836,176 +819,487 @@ static bool is_inside(struct v4l2_rect *r1, struct v4l2_rect *r2) r1->top + r1->height < r2->top + r2->height; } +static unsigned int scale_down(unsigned int size, unsigned int scale) +{ + return (size * 4096 + scale / 2) / scale; +} + +static unsigned int scale_up(unsigned int size, unsigned int scale) +{ + return (size * scale + 2048) / 4096; +} + +static unsigned int calc_generic_scale(unsigned int input, unsigned int output) +{ + return (input * 4096 + output / 2) / output; +} + +static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect) +{ + struct v4l2_crop crop; + struct v4l2_cropcap cap; + int ret; + + crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + ret = v4l2_subdev_call(sd, video, g_crop, &crop); + if (!ret) { + *rect = crop.c; + return ret; + } + + /* Camera driver doesn't support .g_crop(), assume default rectangle */ + cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + ret = v4l2_subdev_call(sd, video, cropcap, &cap); + if (ret < 0) + return ret; + + *rect = cap.defrect; + + return ret; +} + /* - * CEU can scale and crop, but we don't want to waste bandwidth and kill the - * framerate by always requesting the maximum image from the client. For - * cropping we also have to take care of the current scale. The common for both - * scaling and cropping approach is: + * The common for both scaling and cropping iterative approach is: * 1. try if the client can produce exactly what requested by the user * 2. if (1) failed, try to double the client image until we get one big enough * 3. if (2) failed, try to request the maximum image */ -static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *a) +static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop, + struct v4l2_crop *cam_crop) { - struct v4l2_rect *rect = &a->c; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); - struct sh_mobile_ceu_dev *pcdev = ici->priv; - struct v4l2_crop cam_crop; - struct v4l2_rect *cam_rect = &cam_crop.c, target, cam_max; - struct sh_mobile_ceu_cam *cam = icd->host_priv; - struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - unsigned int hscale = pcdev->cflcr & 0xffff; - unsigned int vscale = (pcdev->cflcr >> 16) & 0xffff; - unsigned short width, height; - u32 capsr; + struct v4l2_rect *rect = &crop->c, *cam_rect = &cam_crop->c; + struct device *dev = sd->v4l2_dev->dev; + struct v4l2_cropcap cap; int ret; + unsigned int width, height; - /* Scale back up into client units */ - cam_rect->left = size_src(rect->left, hscale); - cam_rect->width = size_src(rect->width, hscale); - cam_rect->top = size_src(rect->top, vscale); - cam_rect->height = size_src(rect->height, vscale); - - target = *cam_rect; + v4l2_subdev_call(sd, video, s_crop, crop); + ret = client_g_rect(sd, cam_rect); + if (ret < 0) + return ret; - capsr = capture_save_reset(pcdev); - dev_dbg(icd->dev.parent, "CAPSR 0x%x, CFLCR 0x%x\n", - capsr, pcdev->cflcr); - - /* First attempt - see if the client can deliver a perfect result */ - ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop); - if (!ret && !memcmp(&target, &cam_rect, sizeof(target))) { - dev_dbg(icd->dev.parent, - "Camera S_CROP successful for %ux%u@%u:%u\n", - cam_rect->width, cam_rect->height, - cam_rect->left, cam_rect->top); - goto ceu_set_rect; + /* + * Now cam_crop contains the current camera input rectangle, and it must + * be within camera cropcap bounds + */ + if (!memcmp(rect, cam_rect, sizeof(*rect))) { + /* Even if camera S_CROP failed, but camera rectangle matches */ + dev_dbg(dev, "Camera S_CROP successful for %ux%u@%u:%u\n", + rect->width, rect->height, rect->left, rect->top); + return 0; } - /* Try to fix cropping, that camera hasn't managed to do */ - dev_dbg(icd->dev.parent, "Fix camera S_CROP %d for %ux%u@%u:%u" - " to %ux%u@%u:%u\n", - ret, cam_rect->width, cam_rect->height, + /* Try to fix cropping, that camera hasn't managed to set */ + dev_geo(dev, "Fix camera S_CROP for %ux%u@%u:%u to %ux%u@%u:%u\n", + cam_rect->width, cam_rect->height, cam_rect->left, cam_rect->top, - target.width, target.height, target.left, target.top); + rect->width, rect->height, rect->left, rect->top); + + /* We need sensor maximum rectangle */ + ret = v4l2_subdev_call(sd, video, cropcap, &cap); + if (ret < 0) + return ret; + + soc_camera_limit_side(&rect->left, &rect->width, cap.bounds.left, 2, + cap.bounds.width); + soc_camera_limit_side(&rect->top, &rect->height, cap.bounds.top, 4, + cap.bounds.height); /* * Popular special case - some cameras can only handle fixed sizes like * QVGA, VGA,... Take care to avoid infinite loop. */ - width = max(cam_rect->width, 1); - height = max(cam_rect->height, 1); - cam_max.width = size_src(icd->rect_max.width, hscale); - cam_max.left = size_src(icd->rect_max.left, hscale); - cam_max.height = size_src(icd->rect_max.height, vscale); - cam_max.top = size_src(icd->rect_max.top, vscale); - while (!ret && (is_smaller(cam_rect, &target) || - is_inside(cam_rect, &target)) && - cam_max.width >= width && cam_max.height >= height) { + width = max(cam_rect->width, 2); + height = max(cam_rect->height, 2); + + while (!ret && (is_smaller(cam_rect, rect) || + is_inside(cam_rect, rect)) && + (cap.bounds.width > width || cap.bounds.height > height)) { width *= 2; height *= 2; + cam_rect->width = width; cam_rect->height = height; - /* We do not know what the camera is capable of, play safe */ - if (cam_rect->left > target.left) - cam_rect->left = cam_max.left; + /* + * We do not know what capabilities the camera has to set up + * left and top borders. We could try to be smarter in iterating + * them, e.g., if camera current left is to the right of the + * target left, set it to the middle point between the current + * left and minimum left. But that would add too much + * complexity: we would have to iterate each border separately. + */ + if (cam_rect->left > rect->left) + cam_rect->left = cap.bounds.left; - if (cam_rect->left + cam_rect->width < target.left + target.width) - cam_rect->width = target.left + target.width - + if (cam_rect->left + cam_rect->width < rect->left + rect->width) + cam_rect->width = rect->left + rect->width - cam_rect->left; - if (cam_rect->top > target.top) - cam_rect->top = cam_max.top; + if (cam_rect->top > rect->top) + cam_rect->top = cap.bounds.top; - if (cam_rect->top + cam_rect->height < target.top + target.height) - cam_rect->height = target.top + target.height - + if (cam_rect->top + cam_rect->height < rect->top + rect->height) + cam_rect->height = rect->top + rect->height - cam_rect->top; - if (cam_rect->width + cam_rect->left > - cam_max.width + cam_max.left) - cam_rect->left = max(cam_max.width + cam_max.left - - cam_rect->width, cam_max.left); - - if (cam_rect->height + cam_rect->top > - cam_max.height + cam_max.top) - cam_rect->top = max(cam_max.height + cam_max.top - - cam_rect->height, cam_max.top); - - ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop); - dev_dbg(icd->dev.parent, "Camera S_CROP %d for %ux%u@%u:%u\n", - ret, cam_rect->width, cam_rect->height, + v4l2_subdev_call(sd, video, s_crop, cam_crop); + ret = client_g_rect(sd, cam_rect); + dev_geo(dev, "Camera S_CROP %d for %ux%u@%u:%u\n", ret, + cam_rect->width, cam_rect->height, cam_rect->left, cam_rect->top); } - /* - * If the camera failed to configure cropping, it should not modify the - * rectangle - */ - if ((ret < 0 && (is_smaller(&icd->rect_current, rect) || - is_inside(&icd->rect_current, rect))) || - is_smaller(cam_rect, &target) || is_inside(cam_rect, &target)) { + /* S_CROP must not modify the rectangle */ + if (is_smaller(cam_rect, rect) || is_inside(cam_rect, rect)) { /* * The camera failed to configure a suitable cropping, * we cannot use the current rectangle, set to max */ - *cam_rect = cam_max; - ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop); - dev_dbg(icd->dev.parent, - "Camera S_CROP %d for max %ux%u@%u:%u\n", - ret, cam_rect->width, cam_rect->height, + *cam_rect = cap.bounds; + v4l2_subdev_call(sd, video, s_crop, cam_crop); + ret = client_g_rect(sd, cam_rect); + dev_geo(dev, "Camera S_CROP %d for max %ux%u@%u:%u\n", ret, + cam_rect->width, cam_rect->height, cam_rect->left, cam_rect->top); - if (ret < 0 && ret != -ENOIOCTLCMD) - /* All failed, hopefully resume current capture */ - goto resume_capture; - - /* Finally, adjust the target rectangle */ - if (target.width > cam_rect->width) - target.width = cam_rect->width; - if (target.height > cam_rect->height) - target.height = cam_rect->height; - if (target.left + target.width > cam_rect->left + cam_rect->width) - target.left = cam_rect->left + cam_rect->width - - target.width; - if (target.top + target.height > cam_rect->top + cam_rect->height) - target.top = cam_rect->top + cam_rect->height - - target.height; } - /* We now have a rectangle, larger than requested, let's crop */ + return ret; +} + +static int get_camera_scales(struct v4l2_subdev *sd, struct v4l2_rect *rect, + unsigned int *scale_h, unsigned int *scale_v) +{ + struct v4l2_format f; + int ret; + + f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + ret = v4l2_subdev_call(sd, video, g_fmt, &f); + if (ret < 0) + return ret; + + *scale_h = calc_generic_scale(rect->width, f.fmt.pix.width); + *scale_v = calc_generic_scale(rect->height, f.fmt.pix.height); + + return 0; +} + +static int get_camera_subwin(struct soc_camera_device *icd, + struct v4l2_rect *cam_subrect, + unsigned int cam_hscale, unsigned int cam_vscale) +{ + struct sh_mobile_ceu_cam *cam = icd->host_priv; + struct v4l2_rect *ceu_rect = &cam->ceu_rect; + + if (!ceu_rect->width) { + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + struct device *dev = icd->dev.parent; + struct v4l2_format f; + struct v4l2_pix_format *pix = &f.fmt.pix; + int ret; + /* First time */ + + f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + ret = v4l2_subdev_call(sd, video, g_fmt, &f); + if (ret < 0) + return ret; + + dev_geo(dev, "camera fmt %ux%u\n", pix->width, pix->height); + + if (pix->width > 2560) { + ceu_rect->width = 2560; + ceu_rect->left = (pix->width - 2560) / 2; + } else { + ceu_rect->width = pix->width; + ceu_rect->left = 0; + } + + if (pix->height > 1920) { + ceu_rect->height = 1920; + ceu_rect->top = (pix->height - 1920) / 2; + } else { + ceu_rect->height = pix->height; + ceu_rect->top = 0; + } + + dev_geo(dev, "initialised CEU rect %ux%u@%u:%u\n", + ceu_rect->width, ceu_rect->height, + ceu_rect->left, ceu_rect->top); + } + + cam_subrect->width = scale_up(ceu_rect->width, cam_hscale); + cam_subrect->left = scale_up(ceu_rect->left, cam_hscale); + cam_subrect->height = scale_up(ceu_rect->height, cam_vscale); + cam_subrect->top = scale_up(ceu_rect->top, cam_vscale); + + return 0; +} + +static int client_s_fmt(struct soc_camera_device *icd, struct v4l2_format *f, + bool ceu_can_scale) +{ + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + struct device *dev = icd->dev.parent; + struct v4l2_pix_format *pix = &f->fmt.pix; + unsigned int width = pix->width, height = pix->height, tmp_w, tmp_h; + unsigned int max_width, max_height; + struct v4l2_cropcap cap; + int ret; + + cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + ret = v4l2_subdev_call(sd, video, cropcap, &cap); + if (ret < 0) + return ret; + + max_width = min(cap.bounds.width, 2560); + max_height = min(cap.bounds.height, 1920); + + ret = v4l2_subdev_call(sd, video, s_fmt, f); + if (ret < 0) + return ret; + + dev_geo(dev, "camera scaled to %ux%u\n", pix->width, pix->height); + + if ((width == pix->width && height == pix->height) || !ceu_can_scale) + return 0; + + /* Camera set a format, but geometry is not precise, try to improve */ + tmp_w = pix->width; + tmp_h = pix->height; + + /* width <= max_width && height <= max_height - guaranteed by try_fmt */ + while ((width > tmp_w || height > tmp_h) && + tmp_w < max_width && tmp_h < max_height) { + tmp_w = min(2 * tmp_w, max_width); + tmp_h = min(2 * tmp_h, max_height); + pix->width = tmp_w; + pix->height = tmp_h; + ret = v4l2_subdev_call(sd, video, s_fmt, f); + dev_geo(dev, "Camera scaled to %ux%u\n", + pix->width, pix->height); + if (ret < 0) { + /* This shouldn't happen */ + dev_err(dev, "Client failed to set format: %d\n", ret); + return ret; + } + } + + return 0; +} + +/** + * @rect - camera cropped rectangle + * @sub_rect - CEU cropped rectangle, mapped back to camera input area + * @ceu_rect - on output calculated CEU crop rectangle + */ +static int client_scale(struct soc_camera_device *icd, struct v4l2_rect *rect, + struct v4l2_rect *sub_rect, struct v4l2_rect *ceu_rect, + struct v4l2_format *f, bool ceu_can_scale) +{ + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + struct sh_mobile_ceu_cam *cam = icd->host_priv; + struct device *dev = icd->dev.parent; + struct v4l2_format f_tmp = *f; + struct v4l2_pix_format *pix_tmp = &f_tmp.fmt.pix; + unsigned int scale_h, scale_v; + int ret; + + /* 5. Apply iterative camera S_FMT for camera user window. */ + ret = client_s_fmt(icd, &f_tmp, ceu_can_scale); + if (ret < 0) + return ret; + + dev_geo(dev, "5: camera scaled to %ux%u\n", + pix_tmp->width, pix_tmp->height); + + /* 6. Retrieve camera output window (g_fmt) */ + + /* unneeded - it is already in "f_tmp" */ + + /* 7. Calculate new camera scales. */ + ret = get_camera_scales(sd, rect, &scale_h, &scale_v); + if (ret < 0) + return ret; + + dev_geo(dev, "7: camera scales %u:%u\n", scale_h, scale_v); + + cam->cam_width = pix_tmp->width; + cam->cam_height = pix_tmp->height; + f->fmt.pix.width = pix_tmp->width; + f->fmt.pix.height = pix_tmp->height; /* - * We have to preserve camera rectangle between close() / open(), - * because soc-camera core calls .set_fmt() on each first open() with - * last before last close() _user_ rectangle, which can be different - * from camera rectangle. + * 8. Calculate new CEU crop - apply camera scales to previously + * calculated "effective" crop. */ - dev_dbg(icd->dev.parent, - "SH S_CROP from %ux%u@%u:%u to %ux%u@%u:%u, scale to %ux%u@%u:%u\n", - cam_rect->width, cam_rect->height, cam_rect->left, cam_rect->top, - target.width, target.height, target.left, target.top, - rect->width, rect->height, rect->left, rect->top); + ceu_rect->left = scale_down(sub_rect->left, scale_h); + ceu_rect->width = scale_down(sub_rect->width, scale_h); + ceu_rect->top = scale_down(sub_rect->top, scale_v); + ceu_rect->height = scale_down(sub_rect->height, scale_v); + + dev_geo(dev, "8: new CEU rect %ux%u@%u:%u\n", + ceu_rect->width, ceu_rect->height, + ceu_rect->left, ceu_rect->top); + + return 0; +} + +/* Get combined scales */ +static int get_scales(struct soc_camera_device *icd, + unsigned int *scale_h, unsigned int *scale_v) +{ + struct sh_mobile_ceu_cam *cam = icd->host_priv; + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + struct v4l2_crop cam_crop; + unsigned int width_in, height_in; + int ret; - ret = 0; + cam_crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; -ceu_set_rect: - cam->camera_rect = *cam_rect; + ret = client_g_rect(sd, &cam_crop.c); + if (ret < 0) + return ret; - rect->width = size_dst(target.width, hscale); - rect->left = size_dst(target.left, hscale); - rect->height = size_dst(target.height, vscale); - rect->top = size_dst(target.top, vscale); + ret = get_camera_scales(sd, &cam_crop.c, scale_h, scale_v); + if (ret < 0) + return ret; - sh_mobile_ceu_set_rect(icd, rect); + width_in = scale_up(cam->ceu_rect.width, *scale_h); + height_in = scale_up(cam->ceu_rect.height, *scale_v); -resume_capture: - /* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */ + *scale_h = calc_generic_scale(cam->ceu_rect.width, icd->user_width); + *scale_v = calc_generic_scale(cam->ceu_rect.height, icd->user_height); + + return 0; +} + +/* + * CEU can scale and crop, but we don't want to waste bandwidth and kill the + * framerate by always requesting the maximum image from the client. See + * Documentation/video4linux/sh_mobile_camera_ceu.txt for a description of + * scaling and cropping algorithms and for the meaning of referenced here steps. + */ +static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, + struct v4l2_crop *a) +{ + struct v4l2_rect *rect = &a->c; + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct sh_mobile_ceu_dev *pcdev = ici->priv; + struct v4l2_crop cam_crop; + struct sh_mobile_ceu_cam *cam = icd->host_priv; + struct v4l2_rect *cam_rect = &cam_crop.c, *ceu_rect = &cam->ceu_rect; + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + struct device *dev = icd->dev.parent; + struct v4l2_format f; + struct v4l2_pix_format *pix = &f.fmt.pix; + unsigned int scale_comb_h, scale_comb_v, scale_ceu_h, scale_ceu_v, + out_width, out_height; + u32 capsr, cflcr; + int ret; + + /* 1. Calculate current combined scales. */ + ret = get_scales(icd, &scale_comb_h, &scale_comb_v); + if (ret < 0) + return ret; + + dev_geo(dev, "1: combined scales %u:%u\n", scale_comb_h, scale_comb_v); + + /* 2. Apply iterative camera S_CROP for new input window. */ + ret = client_s_crop(sd, a, &cam_crop); + if (ret < 0) + return ret; + + dev_geo(dev, "2: camera cropped to %ux%u@%u:%u\n", + cam_rect->width, cam_rect->height, + cam_rect->left, cam_rect->top); + + /* On success cam_crop contains current camera crop */ + + /* + * 3. If old combined scales applied to new crop produce an impossible + * user window, adjust scales to produce nearest possible window. + */ + out_width = scale_down(rect->width, scale_comb_h); + out_height = scale_down(rect->height, scale_comb_v); + + if (out_width > 2560) + out_width = 2560; + else if (out_width < 2) + out_width = 2; + + if (out_height > 1920) + out_height = 1920; + else if (out_height < 4) + out_height = 4; + + dev_geo(dev, "3: Adjusted output %ux%u\n", out_width, out_height); + + /* 4. Use G_CROP to retrieve actual input window: already in cam_crop */ + + /* + * 5. Using actual input window and calculated combined scales calculate + * camera target output window. + */ + pix->width = scale_down(cam_rect->width, scale_comb_h); + pix->height = scale_down(cam_rect->height, scale_comb_v); + + dev_geo(dev, "5: camera target %ux%u\n", pix->width, pix->height); + + /* 6. - 9. */ + pix->pixelformat = cam->camera_fmt->fourcc; + pix->colorspace = cam->camera_fmt->colorspace; + + capsr = capture_save_reset(pcdev); + dev_dbg(dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr); + + /* Make relative to camera rectangle */ + rect->left -= cam_rect->left; + rect->top -= cam_rect->top; + + f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + ret = client_scale(icd, cam_rect, rect, ceu_rect, &f, + pcdev->image_mode && !pcdev->is_interlaced); + + dev_geo(dev, "6-9: %d\n", ret); + + /* 10. Use CEU cropping to crop to the new window. */ + sh_mobile_ceu_set_rect(icd, out_width, out_height); + + dev_geo(dev, "10: CEU cropped to %ux%u@%u:%u\n", + ceu_rect->width, ceu_rect->height, + ceu_rect->left, ceu_rect->top); + + /* + * 11. Calculate CEU scales from camera scales from results of (10) and + * user window from (3) + */ + scale_ceu_h = calc_scale(ceu_rect->width, &out_width); + scale_ceu_v = calc_scale(ceu_rect->height, &out_height); + + dev_geo(dev, "11: CEU scales %u:%u\n", scale_ceu_h, scale_ceu_v); + + /* 12. Apply CEU scales. */ + cflcr = scale_ceu_h | (scale_ceu_v << 16); + if (cflcr != pcdev->cflcr) { + pcdev->cflcr = cflcr; + ceu_write(pcdev, CFLCR, cflcr); + } + + /* Restore capture */ if (pcdev->active) capsr |= 1; capture_restore(pcdev, capsr); + icd->user_width = out_width; + icd->user_height = out_height; + /* Even if only camera cropping succeeded */ return ret; } @@ -1018,121 +1312,137 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd, struct sh_mobile_ceu_dev *pcdev = ici->priv; struct sh_mobile_ceu_cam *cam = icd->host_priv; struct v4l2_pix_format *pix = &f->fmt.pix; + struct v4l2_format cam_f = *f; + struct v4l2_pix_format *cam_pix = &cam_f.fmt.pix; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + struct device *dev = icd->dev.parent; __u32 pixfmt = pix->pixelformat; const struct soc_camera_format_xlate *xlate; - unsigned int width = pix->width, height = pix->height, tmp_w, tmp_h; - u16 vscale, hscale; - int ret, is_interlaced; + struct v4l2_crop cam_crop; + struct v4l2_rect *cam_rect = &cam_crop.c, cam_subrect, ceu_rect; + unsigned int scale_cam_h, scale_cam_v; + u16 scale_v, scale_h; + int ret; + bool is_interlaced, image_mode; switch (pix->field) { case V4L2_FIELD_INTERLACED: - is_interlaced = 1; + is_interlaced = true; break; case V4L2_FIELD_ANY: default: pix->field = V4L2_FIELD_NONE; /* fall-through */ case V4L2_FIELD_NONE: - is_interlaced = 0; + is_interlaced = false; break; } xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); if (!xlate) { - dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt); + dev_warn(dev, "Format %x not found\n", pixfmt); return -EINVAL; } - pix->pixelformat = xlate->cam_fmt->fourcc; - ret = v4l2_subdev_call(sd, video, s_fmt, f); - pix->pixelformat = pixfmt; - dev_dbg(icd->dev.parent, - "Camera %d fmt %ux%u, requested %ux%u, max %ux%u\n", - ret, pix->width, pix->height, width, height, - icd->rect_max.width, icd->rect_max.height); + /* 1. Calculate current camera scales. */ + cam_crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + ret = client_g_rect(sd, cam_rect); + if (ret < 0) + return ret; + + ret = get_camera_scales(sd, cam_rect, &scale_cam_h, &scale_cam_v); + if (ret < 0) + return ret; + + dev_geo(dev, "1: camera scales %u:%u\n", scale_cam_h, scale_cam_v); + + /* + * 2. Calculate "effective" input crop (sensor subwindow) - CEU crop + * scaled back at current camera scales onto input window. + */ + ret = get_camera_subwin(icd, &cam_subrect, scale_cam_h, scale_cam_v); if (ret < 0) return ret; + dev_geo(dev, "2: subwin %ux%u@%u:%u\n", + cam_subrect.width, cam_subrect.height, + cam_subrect.left, cam_subrect.top); + + /* + * 3. Calculate new combined scales from "effective" input window to + * requested user window. + */ + scale_h = calc_generic_scale(cam_subrect.width, pix->width); + scale_v = calc_generic_scale(cam_subrect.height, pix->height); + + dev_geo(dev, "3: scales %u:%u\n", scale_h, scale_v); + + /* + * 4. Calculate camera output window by applying combined scales to real + * input window. + */ + cam_pix->width = scale_down(cam_rect->width, scale_h); + cam_pix->height = scale_down(cam_rect->height, scale_v); + cam_pix->pixelformat = xlate->cam_fmt->fourcc; + switch (pixfmt) { case V4L2_PIX_FMT_NV12: case V4L2_PIX_FMT_NV21: case V4L2_PIX_FMT_NV16: case V4L2_PIX_FMT_NV61: - pcdev->image_mode = 1; + image_mode = true; break; default: - pcdev->image_mode = 0; + image_mode = false; } - if ((abs(width - pix->width) < 4 && abs(height - pix->height) < 4) || - !pcdev->image_mode || is_interlaced) { - hscale = 0; - vscale = 0; - goto out; - } + dev_geo(dev, "4: camera output %ux%u\n", + cam_pix->width, cam_pix->height); - /* Camera set a format, but geometry is not precise, try to improve */ - /* - * FIXME: when soc-camera is converted to implement traditional S_FMT - * and S_CROP semantics, replace CEU limits with camera maxima - */ - tmp_w = pix->width; - tmp_h = pix->height; - while ((width > tmp_w || height > tmp_h) && - tmp_w < 2560 && tmp_h < 1920) { - tmp_w = min(2 * tmp_w, (__u32)2560); - tmp_h = min(2 * tmp_h, (__u32)1920); - pix->width = tmp_w; - pix->height = tmp_h; - pix->pixelformat = xlate->cam_fmt->fourcc; - ret = v4l2_subdev_call(sd, video, s_fmt, f); - pix->pixelformat = pixfmt; - dev_dbg(icd->dev.parent, "Camera scaled to %ux%u\n", - pix->width, pix->height); - if (ret < 0) { - /* This shouldn't happen */ - dev_err(icd->dev.parent, - "Client failed to set format: %d\n", ret); - return ret; - } - } + /* 5. - 9. */ + ret = client_scale(icd, cam_rect, &cam_subrect, &ceu_rect, &cam_f, + image_mode && !is_interlaced); + + dev_geo(dev, "5-9: client scale %d\n", ret); + + /* Done with the camera. Now see if we can improve the result */ + + dev_dbg(dev, "Camera %d fmt %ux%u, requested %ux%u\n", + ret, cam_pix->width, cam_pix->height, pix->width, pix->height); + if (ret < 0) + return ret; + + /* 10. Use CEU scaling to scale to the requested user window. */ /* We cannot scale up */ - if (width > pix->width) - width = pix->width; + if (pix->width > cam_pix->width) + pix->width = cam_pix->width; + if (pix->width > ceu_rect.width) + pix->width = ceu_rect.width; - if (height > pix->height) - height = pix->height; + if (pix->height > cam_pix->height) + pix->height = cam_pix->height; + if (pix->height > ceu_rect.height) + pix->height = ceu_rect.height; /* Let's rock: scale pix->{width x height} down to width x height */ - hscale = calc_scale(pix->width, &width); - vscale = calc_scale(pix->height, &height); + scale_h = calc_scale(ceu_rect.width, &pix->width); + scale_v = calc_scale(ceu_rect.height, &pix->height); - dev_dbg(icd->dev.parent, "W: %u : 0x%x = %u, H: %u : 0x%x = %u\n", - pix->width, hscale, width, pix->height, vscale, height); + dev_geo(dev, "10: W: %u : 0x%x = %u, H: %u : 0x%x = %u\n", + ceu_rect.width, scale_h, pix->width, + ceu_rect.height, scale_v, pix->height); -out: - pcdev->cflcr = hscale | (vscale << 16); + pcdev->cflcr = scale_h | (scale_v << 16); icd->buswidth = xlate->buswidth; icd->current_fmt = xlate->host_fmt; cam->camera_fmt = xlate->cam_fmt; - cam->camera_rect.width = pix->width; - cam->camera_rect.height = pix->height; - - icd->rect_max.left = size_dst(cam->camera_max.left, hscale); - icd->rect_max.width = size_dst(cam->camera_max.width, hscale); - icd->rect_max.top = size_dst(cam->camera_max.top, vscale); - icd->rect_max.height = size_dst(cam->camera_max.height, vscale); - - icd->rect_current.left = icd->rect_max.left; - icd->rect_current.top = icd->rect_max.top; + cam->ceu_rect = ceu_rect; pcdev->is_interlaced = is_interlaced; - - pix->width = width; - pix->height = height; + pcdev->image_mode = image_mode; return 0; } diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index c6cccdf8daf..86e0648f65a 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -278,6 +278,9 @@ static void soc_camera_free_user_formats(struct soc_camera_device *icd) icd->user_formats = NULL; } +#define pixfmtstr(x) (x) & 0xff, ((x) >> 8) & 0xff, ((x) >> 16) & 0xff, \ + ((x) >> 24) & 0xff + /* Called with .vb_lock held */ static int soc_camera_set_fmt(struct soc_camera_file *icf, struct v4l2_format *f) @@ -287,6 +290,9 @@ static int soc_camera_set_fmt(struct soc_camera_file *icf, struct v4l2_pix_format *pix = &f->fmt.pix; int ret; + dev_dbg(&icd->dev, "S_FMT(%c%c%c%c, %ux%u)\n", + pixfmtstr(pix->pixelformat), pix->width, pix->height); + /* We always call try_fmt() before set_fmt() or set_crop() */ ret = ici->ops->try_fmt(icd, f); if (ret < 0) @@ -302,17 +308,17 @@ static int soc_camera_set_fmt(struct soc_camera_file *icf, return -EINVAL; } - icd->rect_current.width = pix->width; - icd->rect_current.height = pix->height; - icf->vb_vidq.field = - icd->field = pix->field; + icd->user_width = pix->width; + icd->user_height = pix->height; + icf->vb_vidq.field = + icd->field = pix->field; if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) dev_warn(&icd->dev, "Attention! Wrong buf-type %d\n", f->type); dev_dbg(&icd->dev, "set width: %d height: %d\n", - icd->rect_current.width, icd->rect_current.height); + icd->user_width, icd->user_height); /* set physical bus parameters */ return ici->ops->set_bus_param(icd, pix->pixelformat); @@ -355,8 +361,8 @@ static int soc_camera_open(struct file *file) struct v4l2_format f = { .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, .fmt.pix = { - .width = icd->rect_current.width, - .height = icd->rect_current.height, + .width = icd->user_width, + .height = icd->user_height, .field = icd->field, .pixelformat = icd->current_fmt->fourcc, .colorspace = icd->current_fmt->colorspace, @@ -557,8 +563,8 @@ static int soc_camera_g_fmt_vid_cap(struct file *file, void *priv, WARN_ON(priv != file->private_data); - pix->width = icd->rect_current.width; - pix->height = icd->rect_current.height; + pix->width = icd->user_width; + pix->height = icd->user_height; pix->field = icf->vb_vidq.field; pix->pixelformat = icd->current_fmt->fourcc; pix->bytesperline = pix->width * @@ -722,17 +728,9 @@ static int soc_camera_cropcap(struct file *file, void *fh, { struct soc_camera_file *icf = file->private_data; struct soc_camera_device *icd = icf->icd; + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); - a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - a->bounds = icd->rect_max; - a->defrect.left = icd->rect_max.left; - a->defrect.top = icd->rect_max.top; - a->defrect.width = DEFAULT_WIDTH; - a->defrect.height = DEFAULT_HEIGHT; - a->pixelaspect.numerator = 1; - a->pixelaspect.denominator = 1; - - return 0; + return ici->ops->cropcap(icd, a); } static int soc_camera_g_crop(struct file *file, void *fh, @@ -740,11 +738,14 @@ static int soc_camera_g_crop(struct file *file, void *fh, { struct soc_camera_file *icf = file->private_data; struct soc_camera_device *icd = icf->icd; + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + int ret; - a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - a->c = icd->rect_current; + mutex_lock(&icf->vb_vidq.vb_lock); + ret = ici->ops->get_crop(icd, a); + mutex_unlock(&icf->vb_vidq.vb_lock); - return 0; + return ret; } /* @@ -759,49 +760,33 @@ static int soc_camera_s_crop(struct file *file, void *fh, struct soc_camera_file *icf = file->private_data; struct soc_camera_device *icd = icf->icd; struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); - struct v4l2_rect rect = a->c; + struct v4l2_rect *rect = &a->c; + struct v4l2_crop current_crop; int ret; if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; + dev_dbg(&icd->dev, "S_CROP(%ux%u@%u:%u)\n", + rect->width, rect->height, rect->left, rect->top); + /* Cropping is allowed during a running capture, guard consistency */ mutex_lock(&icf->vb_vidq.vb_lock); + /* If get_crop fails, we'll let host and / or client drivers decide */ + ret = ici->ops->get_crop(icd, ¤t_crop); + /* Prohibit window size change with initialised buffers */ - if (icf->vb_vidq.bufs[0] && (rect.width != icd->rect_current.width || - rect.height != icd->rect_current.height)) { + if (icf->vb_vidq.bufs[0] && !ret && + (a->c.width != current_crop.c.width || + a->c.height != current_crop.c.height)) { dev_err(&icd->dev, "S_CROP denied: queue initialised and sizes differ\n"); ret = -EBUSY; - goto unlock; + } else { + ret = ici->ops->set_crop(icd, a); } - if (rect.width > icd->rect_max.width) - rect.width = icd->rect_max.width; - - if (rect.width < icd->width_min) - rect.width = icd->width_min; - - if (rect.height > icd->rect_max.height) - rect.height = icd->rect_max.height; - - if (rect.height < icd->height_min) - rect.height = icd->height_min; - - if (rect.width + rect.left > icd->rect_max.width + icd->rect_max.left) - rect.left = icd->rect_max.width + icd->rect_max.left - - rect.width; - - if (rect.height + rect.top > icd->rect_max.height + icd->rect_max.top) - rect.top = icd->rect_max.height + icd->rect_max.top - - rect.height; - - ret = ici->ops->set_crop(icd, a); - if (!ret) - icd->rect_current = rect; - -unlock: mutex_unlock(&icf->vb_vidq.vb_lock); return ret; @@ -926,6 +911,8 @@ static int soc_camera_probe(struct device *dev) struct soc_camera_host *ici = to_soc_camera_host(dev->parent); struct soc_camera_link *icl = to_soc_camera_link(icd); struct device *control = NULL; + struct v4l2_subdev *sd; + struct v4l2_format f = {.type = V4L2_BUF_TYPE_VIDEO_CAPTURE}; int ret; dev_info(dev, "Probing %s\n", dev_name(dev)); @@ -982,7 +969,6 @@ static int soc_camera_probe(struct device *dev) if (ret < 0) goto eiufmt; - icd->rect_current = icd->rect_max; icd->field = V4L2_FIELD_ANY; /* ..._video_start() will create a device node, so we have to protect */ @@ -992,9 +978,15 @@ static int soc_camera_probe(struct device *dev) if (ret < 0) goto evidstart; + /* Try to improve our guess of a reasonable window format */ + sd = soc_camera_to_subdev(icd); + if (!v4l2_subdev_call(sd, video, g_fmt, &f)) { + icd->user_width = f.fmt.pix.width; + icd->user_height = f.fmt.pix.height; + } + /* Do we have to sysfs_remove_link() before device_unregister()? */ - if (to_soc_camera_control(icd) && - sysfs_create_link(&icd->dev.kobj, &to_soc_camera_control(icd)->kobj, + if (sysfs_create_link(&icd->dev.kobj, &to_soc_camera_control(icd)->kobj, "control")) dev_warn(&icd->dev, "Failed creating the control symlink\n"); @@ -1103,6 +1095,25 @@ static void dummy_release(struct device *dev) { } +static int default_cropcap(struct soc_camera_device *icd, + struct v4l2_cropcap *a) +{ + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + return v4l2_subdev_call(sd, video, cropcap, a); +} + +static int default_g_crop(struct soc_camera_device *icd, struct v4l2_crop *a) +{ + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + return v4l2_subdev_call(sd, video, g_crop, a); +} + +static int default_s_crop(struct soc_camera_device *icd, struct v4l2_crop *a) +{ + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + return v4l2_subdev_call(sd, video, s_crop, a); +} + int soc_camera_host_register(struct soc_camera_host *ici) { struct soc_camera_host *ix; @@ -1111,7 +1122,6 @@ int soc_camera_host_register(struct soc_camera_host *ici) if (!ici || !ici->ops || !ici->ops->try_fmt || !ici->ops->set_fmt || - !ici->ops->set_crop || !ici->ops->set_bus_param || !ici->ops->querycap || !ici->ops->init_videobuf || @@ -1122,6 +1132,13 @@ int soc_camera_host_register(struct soc_camera_host *ici) !ici->v4l2_dev.dev) return -EINVAL; + if (!ici->ops->set_crop) + ici->ops->set_crop = default_s_crop; + if (!ici->ops->get_crop) + ici->ops->get_crop = default_g_crop; + if (!ici->ops->cropcap) + ici->ops->cropcap = default_cropcap; + mutex_lock(&list_lock); list_for_each_entry(ix, &hosts, list) { if (ix->nr == ici->nr) { @@ -1321,6 +1338,9 @@ static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev) if (ret < 0) goto escdevreg; + icd->user_width = DEFAULT_WIDTH; + icd->user_height = DEFAULT_HEIGHT; + return 0; escdevreg: diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c index aec2cadbd2e..3825c358172 100644 --- a/drivers/media/video/soc_camera_platform.c +++ b/drivers/media/video/soc_camera_platform.c @@ -127,10 +127,6 @@ static int soc_camera_platform_probe(struct platform_device *pdev) /* Set the control device reference */ dev_set_drvdata(&icd->dev, &pdev->dev); - icd->width_min = 0; - icd->rect_max.width = p->format.width; - icd->height_min = 0; - icd->rect_max.height = p->format.height; icd->y_skip_top = 0; icd->ops = &soc_camera_platform_ops; diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c index 94bd5b09f05..fbf4130dfc5 100644 --- a/drivers/media/video/tw9910.c +++ b/drivers/media/video/tw9910.c @@ -715,8 +715,88 @@ tw9910_set_fmt_error: return ret; } +static int tw9910_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = sd->priv; + struct tw9910_priv *priv = to_tw9910(client); + + if (!priv->scale) { + int ret; + struct v4l2_crop crop = { + .c = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }; + ret = tw9910_s_crop(sd, &crop); + if (ret < 0) + return ret; + } + + a->c.left = 0; + a->c.top = 0; + a->c.width = priv->scale->width; + a->c.height = priv->scale->height; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int tw9910_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = 768; + a->bounds.height = 576; + a->defrect.left = 0; + a->defrect.top = 0; + a->defrect.width = 640; + a->defrect.height = 480; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int tw9910_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) +{ + struct i2c_client *client = sd->priv; + struct tw9910_priv *priv = to_tw9910(client); + struct v4l2_pix_format *pix = &f->fmt.pix; + + if (!priv->scale) { + int ret; + struct v4l2_crop crop = { + .c = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }; + ret = tw9910_s_crop(sd, &crop); + if (ret < 0) + return ret; + } + + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + pix->width = priv->scale->width; + pix->height = priv->scale->height; + pix->pixelformat = V4L2_PIX_FMT_VYUY; + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + pix->field = V4L2_FIELD_INTERLACED; + + return 0; +} + static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) { + struct i2c_client *client = sd->priv; + struct tw9910_priv *priv = to_tw9910(client); struct v4l2_pix_format *pix = &f->fmt.pix; /* See tw9910_s_crop() - no proper cropping support */ struct v4l2_crop a = { @@ -741,8 +821,8 @@ static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) ret = tw9910_s_crop(sd, &a); if (!ret) { - pix->width = a.c.width; - pix->height = a.c.height; + pix->width = priv->scale->width; + pix->height = priv->scale->height; } return ret; } @@ -838,8 +918,11 @@ static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = { .s_stream = tw9910_s_stream, + .g_fmt = tw9910_g_fmt, .s_fmt = tw9910_s_fmt, .try_fmt = tw9910_try_fmt, + .cropcap = tw9910_cropcap, + .g_crop = tw9910_g_crop, .s_crop = tw9910_s_crop, }; @@ -852,20 +935,6 @@ static struct v4l2_subdev_ops tw9910_subdev_ops = { * i2c_driver function */ -/* This is called during probe, so, setting rect_max is Ok here: scale == 1 */ -static void limit_to_scale(struct soc_camera_device *icd, - const struct tw9910_scale_ctrl *scale) -{ - if (scale->width > icd->rect_max.width) - icd->rect_max.width = scale->width; - if (scale->width < icd->width_min) - icd->width_min = scale->width; - if (scale->height > icd->rect_max.height) - icd->rect_max.height = scale->height; - if (scale->height < icd->height_min) - icd->height_min = scale->height; -} - static int tw9910_probe(struct i2c_client *client, const struct i2c_device_id *did) @@ -876,8 +945,7 @@ static int tw9910_probe(struct i2c_client *client, struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct soc_camera_link *icl; - const struct tw9910_scale_ctrl *scale; - int i, ret; + int ret; if (!icd) { dev_err(&client->dev, "TW9910: missing soc-camera data!\n"); @@ -908,22 +976,6 @@ static int tw9910_probe(struct i2c_client *client, icd->ops = &tw9910_ops; icd->iface = info->link.bus_id; - /* - * set width and height - */ - icd->rect_max.width = tw9910_ntsc_scales[0].width; /* set default */ - icd->width_min = tw9910_ntsc_scales[0].width; - icd->rect_max.height = tw9910_ntsc_scales[0].height; - icd->height_min = tw9910_ntsc_scales[0].height; - - scale = tw9910_ntsc_scales; - for (i = 0; i < ARRAY_SIZE(tw9910_ntsc_scales); i++) - limit_to_scale(icd, scale + i); - - scale = tw9910_pal_scales; - for (i = 0; i < ARRAY_SIZE(tw9910_pal_scales); i++) - limit_to_scale(icd, scale + i); - ret = tw9910_video_probe(icd, client); if (ret) { icd->ops = NULL; diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index 344d8990477..3185e8daaa0 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -22,8 +22,8 @@ struct soc_camera_device { struct list_head list; struct device dev; struct device *pdev; /* Platform device */ - struct v4l2_rect rect_current; /* Current window */ - struct v4l2_rect rect_max; /* Maximum window */ + s32 user_width; + s32 user_height; unsigned short width_min; unsigned short height_min; unsigned short y_skip_top; /* Lines to skip at the top */ @@ -76,6 +76,8 @@ struct soc_camera_host_ops { int (*get_formats)(struct soc_camera_device *, int, struct soc_camera_format_xlate *); void (*put_formats)(struct soc_camera_device *); + int (*cropcap)(struct soc_camera_device *, struct v4l2_cropcap *); + int (*get_crop)(struct soc_camera_device *, struct v4l2_crop *); int (*set_crop)(struct soc_camera_device *, struct v4l2_crop *); int (*set_fmt)(struct soc_camera_device *, struct v4l2_format *); int (*try_fmt)(struct soc_camera_device *, struct v4l2_format *); @@ -277,6 +279,21 @@ static inline unsigned long soc_camera_bus_param_compatible( common_flags; } +static inline void soc_camera_limit_side(unsigned int *start, + unsigned int *length, unsigned int start_min, + unsigned int length_min, unsigned int length_max) +{ + if (*length < length_min) + *length = length_min; + else if (*length > length_max) + *length = length_max; + + if (*start < start_min) + *start = start_min; + else if (*start > start_min + length_max - *length) + *start = start_min + length_max - *length; +} + extern unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl, unsigned long flags); -- cgit v1.2.3-70-g09d2 From 53dacb15705901e14b03dcba27e40364fedd9d09 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 10 Aug 2009 02:49:08 -0300 Subject: V4L/DVB (12540): v4l: simplify v4l2_i2c_new_subdev and friends Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr. This simplifies this API substantially. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/v4l2-framework.txt | 16 ++-- drivers/media/video/au0828/au0828-cards.c | 4 +- drivers/media/video/bt8xx/bttv-cards.c | 44 ++++----- drivers/media/video/cafe_ccic.c | 2 +- drivers/media/video/cx18/cx18-i2c.c | 14 +-- drivers/media/video/cx231xx/cx231xx-cards.c | 4 +- drivers/media/video/cx23885/cx23885-cards.c | 2 +- drivers/media/video/cx23885/cx23885-video.c | 6 +- drivers/media/video/cx88/cx88-cards.c | 14 +-- drivers/media/video/cx88/cx88-video.c | 6 +- drivers/media/video/davinci/vpif_display.c | 4 +- drivers/media/video/em28xx/em28xx-cards.c | 30 +++--- drivers/media/video/ivtv/ivtv-i2c.c | 18 ++-- drivers/media/video/mxb.c | 14 +-- drivers/media/video/pvrusb2/pvrusb2-hdw.c | 10 +- drivers/media/video/saa7134/saa7134-cards.c | 12 +-- drivers/media/video/saa7134/saa7134-core.c | 6 +- drivers/media/video/usbvision/usbvision-i2c.c | 12 +-- drivers/media/video/v4l2-common.c | 133 -------------------------- drivers/media/video/vino.c | 8 +- drivers/media/video/w9968cf.c | 4 +- drivers/media/video/zoran/zoran_card.c | 8 +- include/media/v4l2-common.h | 24 ++--- 23 files changed, 126 insertions(+), 269 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index ba4706afc5f..e395a9cdc53 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -370,19 +370,20 @@ from the remove() callback ensures that this is always done correctly. The bridge driver also has some helper functions it can use: struct v4l2_subdev *sd = v4l2_i2c_new_subdev(v4l2_dev, adapter, - "module_foo", "chipid", 0x36); + "module_foo", "chipid", 0x36, NULL); This loads the given module (can be NULL if no module needs to be loaded) and calls i2c_new_device() with the given i2c_adapter and chip/address arguments. If all goes well, then it registers the subdev with the v4l2_device. -You can also use v4l2_i2c_new_probed_subdev() which is very similar to -v4l2_i2c_new_subdev(), except that it has an array of possible I2C addresses -that it should probe. Internally it calls i2c_new_probed_device(). +You can also use the last argument of v4l2_i2c_new_subdev() to pass an array +of possible I2C addresses that it should probe. These probe addresses are +only used if the previous argument is 0. A non-zero argument means that you +know the exact i2c address so in that case no probing will take place. Both functions return NULL if something went wrong. -Note that the chipid you pass to v4l2_i2c_new_(probed_)subdev() is usually +Note that the chipid you pass to v4l2_i2c_new_subdev() is usually the same as the module name. It allows you to specify a chip variant, e.g. "saa7114" or "saa7115". In general though the i2c driver autodetects this. The use of chipid is something that needs to be looked at more closely at a @@ -410,11 +411,6 @@ the irq and platform_data arguments after the subdev was setup. The older v4l2_i2c_new_(probed_)subdev functions will call s_config as well, but with irq set to 0 and platform_data set to NULL. -Note that in the next kernel release the functions v4l2_i2c_new_subdev, -v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr will all be -replaced by a single v4l2_i2c_new_subdev that is identical to -v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments. - struct video_device ------------------- diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 830c4a933f6..57dd9195daf 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -212,7 +212,7 @@ void au0828_card_setup(struct au0828_dev *dev) be abstracted out if we ever need to support a different demod) */ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "au8522", "au8522", 0x8e >> 1); + "au8522", "au8522", 0x8e >> 1, NULL); if (sd == NULL) printk(KERN_ERR "analog subdev registration failed\n"); } @@ -221,7 +221,7 @@ void au0828_card_setup(struct au0828_dev *dev) if (dev->board.tuner_type != TUNER_ABSENT) { /* Load the tuner module, which does the attach */ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "tuner", "tuner", dev->board.tuner_addr); + "tuner", "tuner", dev->board.tuner_addr, NULL); if (sd == NULL) printk(KERN_ERR "tuner subdev registration fail\n"); diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index b42251fa96b..12279f6d9bc 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -3524,8 +3524,8 @@ void __devinit bttv_init_card2(struct bttv *btv) }; struct v4l2_subdev *sd; - sd = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "saa6588", "saa6588", addrs); + sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "saa6588", "saa6588", 0, addrs); btv->has_saa6588 = (sd != NULL); } @@ -3549,8 +3549,8 @@ void __devinit bttv_init_card2(struct bttv *btv) I2C_CLIENT_END }; - btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "msp3400", "msp3400", addrs); + btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "msp3400", "msp3400", 0, addrs); if (btv->sd_msp34xx) return; goto no_audio; @@ -3563,16 +3563,16 @@ void __devinit bttv_init_card2(struct bttv *btv) I2C_CLIENT_END }; - if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "tda7432", "tda7432", addrs)) + if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs)) return; goto no_audio; } case 3: { /* The user specified that we should probe for tvaudio */ - btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs()); + btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs()); if (btv->sd_tvaudio) return; goto no_audio; @@ -3591,13 +3591,13 @@ void __devinit bttv_init_card2(struct bttv *btv) it really is a msp3400, so it will return NULL when the device found is really something else (e.g. a tea6300). */ if (!bttv_tvcards[btv->c.type].no_msp34xx) { - btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev, + btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, &btv->c.i2c_adap, "msp3400", "msp3400", - I2C_ADDR_MSP3400 >> 1); + 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1)); } else if (bttv_tvcards[btv->c.type].msp34xx_alt) { - btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev, + btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, &btv->c.i2c_adap, "msp3400", "msp3400", - I2C_ADDR_MSP3400_ALT >> 1); + 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1)); } /* If we found a msp34xx, then we're done. */ @@ -3611,14 +3611,14 @@ void __devinit bttv_init_card2(struct bttv *btv) I2C_CLIENT_END }; - if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "tda7432", "tda7432", addrs)) + if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs)) return; } /* Now see if we can find one of the tvaudio devices. */ - btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs()); + btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs()); if (btv->sd_tvaudio) return; @@ -3641,15 +3641,15 @@ void __devinit bttv_init_tuner(struct bttv *btv) /* Load tuner module before issuing tuner config call! */ if (bttv_tvcards[btv->c.type].has_radio) - v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, + v4l2_i2c_new_subdev(&btv->c.v4l2_dev, &btv->c.i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_RADIO)); - v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, + 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); + v4l2_i2c_new_subdev(&btv->c.v4l2_dev, &btv->c.i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); - v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, + 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + v4l2_i2c_new_subdev(&btv->c.v4l2_dev, &btv->c.i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); + 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; tun_setup.type = btv->tuner_type; diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 9c149a78129..657c481d255 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -1955,7 +1955,7 @@ static int cafe_pci_probe(struct pci_dev *pdev, cam->sensor_addr = 0x42; cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, &cam->i2c_adapter, - "ov7670", "ov7670", cam->sensor_addr); + "ov7670", "ov7670", cam->sensor_addr, NULL); if (cam->sensor == NULL) { ret = -ENODEV; goto out_smbus; diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index dbbf93d2eee..2477461e84d 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -139,16 +139,16 @@ int cx18_i2c_register(struct cx18 *cx, unsigned idx) if (hw == CX18_HW_TUNER) { /* special tuner group handling */ - sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev, - adap, mod, type, cx->card_i2c->radio); + sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, + adap, mod, type, 0, cx->card_i2c->radio); if (sd != NULL) sd->grp_id = hw; - sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev, - adap, mod, type, cx->card_i2c->demod); + sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, + adap, mod, type, 0, cx->card_i2c->demod); if (sd != NULL) sd->grp_id = hw; - sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev, - adap, mod, type, cx->card_i2c->tv); + sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, + adap, mod, type, 0, cx->card_i2c->tv); if (sd != NULL) sd->grp_id = hw; return sd != NULL ? 0 : -1; @@ -162,7 +162,7 @@ int cx18_i2c_register(struct cx18 *cx, unsigned idx) return -1; /* It's an I2C device other than an analog tuner or IR chip */ - sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, mod, type, hw_addrs[idx]); + sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, mod, type, hw_addrs[idx], NULL); if (sd != NULL) sd->grp_id = hw; return sd != NULL ? 0 : -1; diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c index 63d2239fd32..319c459459e 100644 --- a/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/drivers/media/video/cx231xx/cx231xx-cards.c @@ -313,7 +313,7 @@ void cx231xx_card_setup(struct cx231xx *dev) if (dev->board.decoder == CX231XX_AVDECODER) { dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[0].i2c_adap, - "cx25840", "cx25840", 0x88 >> 1); + "cx25840", "cx25840", 0x88 >> 1, NULL); if (dev->sd_cx25840 == NULL) cx231xx_info("cx25840 subdev registration failure\n"); cx25840_call(dev, core, load_fw); @@ -323,7 +323,7 @@ void cx231xx_card_setup(struct cx231xx *dev) if (dev->board.tuner_type != TUNER_ABSENT) { dev->sd_tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[1].i2c_adap, - "tuner", "tuner", 0xc2 >> 1); + "tuner", "tuner", 0xc2 >> 1, NULL); if (dev->sd_tuner == NULL) cx231xx_info("tuner subdev registration failure\n"); diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 3143d85ef31..02ba4aec7d9 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -929,7 +929,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[2].i2c_adap, - "cx25840", "cx25840", 0x88 >> 1); + "cx25840", "cx25840", 0x88 >> 1, NULL); v4l2_subdev_call(dev->sd_cx25840, core, load_fw); break; } diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 5d609333630..654cc253cd5 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -1521,11 +1521,11 @@ int cx23885_video_register(struct cx23885_dev *dev) if (dev->tuner_addr) sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[1].i2c_adap, - "tuner", "tuner", dev->tuner_addr); + "tuner", "tuner", dev->tuner_addr, NULL); else - sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, + sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[1].i2c_adap, - "tuner", "tuner", v4l2_i2c_tuner_addrs(ADDRS_TV)); + "tuner", "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV)); if (sd) { struct tuner_setup tun_setup; diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index e5f07fbd5a3..33be6369871 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -3439,20 +3439,20 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) The radio_type is sometimes missing, or set to UNSET but later code configures a tea5767. */ - v4l2_i2c_new_probed_subdev(&core->v4l2_dev, &core->i2c_adap, + v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_RADIO)); + 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); if (has_demod) - v4l2_i2c_new_probed_subdev(&core->v4l2_dev, + v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); if (core->board.tuner_addr == ADDR_UNSET) { - v4l2_i2c_new_probed_subdev(&core->v4l2_dev, + v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, "tuner", "tuner", - has_demod ? tv_addrs + 4 : tv_addrs); + 0, has_demod ? tv_addrs + 4 : tv_addrs); } else { v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, - "tuner", "tuner", core->board.tuner_addr); + "tuner", "tuner", core->board.tuner_addr, NULL); } } diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 2bb54c3ef5c..81d2b5dea18 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1881,14 +1881,14 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, if (core->board.audio_chip == V4L2_IDENT_WM8775) v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, - "wm8775", "wm8775", 0x36 >> 1); + "wm8775", "wm8775", 0x36 >> 1, NULL); if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) { /* This probes for a tda9874 as is used on some Pixelview Ultra boards. */ - v4l2_i2c_new_probed_subdev_addr(&core->v4l2_dev, + v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, - "tvaudio", "tvaudio", 0xb0 >> 1); + "tvaudio", "tvaudio", 0, I2C_ADDRS(0xb0 >> 1)); } switch (core->boardnr) { diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 8ea65d794db..a125a452d24 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -1566,10 +1566,10 @@ static __init int vpif_probe(struct platform_device *pdev) } for (i = 0; i < subdev_count; i++) { - vpif_obj.sd[i] = v4l2_i2c_new_probed_subdev(&vpif_obj.v4l2_dev, + vpif_obj.sd[i] = v4l2_i2c_new_subdev(&vpif_obj.v4l2_dev, i2c_adap, subdevdata[i].name, subdevdata[i].name, - &subdevdata[i].addr); + 0, I2C_ADDRS(subdevdata[i].addr)); if (!vpif_obj.sd[i]) { vpif_err("Error registering v4l2 subdevice\n"); goto probe_subdev_out; diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 8a5ce818170..bdb249bd9d5 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -2372,55 +2372,55 @@ void em28xx_card_setup(struct em28xx *dev) /* request some modules */ if (dev->board.has_msp34xx) - v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "msp3400", "msp3400", msp3400_addrs); + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "msp3400", "msp3400", 0, msp3400_addrs); if (dev->board.decoder == EM28XX_SAA711X) - v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "saa7115", "saa7115_auto", saa711x_addrs); + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "saa7115", "saa7115_auto", 0, saa711x_addrs); if (dev->board.decoder == EM28XX_TVP5150) - v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "tvp5150", "tvp5150", tvp5150_addrs); + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "tvp5150", "tvp5150", 0, tvp5150_addrs); if (dev->em28xx_sensor == EM28XX_MT9V011) { struct v4l2_subdev *sd; - sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, - &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs); + sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_adap, "mt9v011", "mt9v011", 0, mt9v011_addrs); v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal); } if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "tvaudio", "tvaudio", dev->board.tvaudio_addr); + "tvaudio", "tvaudio", dev->board.tvaudio_addr, NULL); if (dev->board.tuner_type != TUNER_ABSENT) { int has_demod = (dev->tda9887_conf & TDA9887_PRESENT); if (dev->board.radio.type) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "tuner", "tuner", dev->board.radio_addr); + "tuner", "tuner", dev->board.radio_addr, NULL); if (has_demod) - v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); if (dev->tuner_addr == 0) { enum v4l2_i2c_tuner_type type = has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; struct v4l2_subdev *sd; - sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, + sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(type)); + 0, v4l2_i2c_tuner_addrs(type)); if (sd) dev->tuner_addr = v4l2_i2c_subdev_addr(sd); } else { v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "tuner", "tuner", dev->tuner_addr); + "tuner", "tuner", dev->tuner_addr, NULL); } } diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index 8f15a31d3f6..b9c71e61f7d 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -161,19 +161,19 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx) return -1; if (hw == IVTV_HW_TUNER) { /* special tuner handling */ - sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev, + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, mod, type, - itv->card_i2c->radio); + 0, itv->card_i2c->radio); if (sd) sd->grp_id = 1 << idx; - sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev, + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, mod, type, - itv->card_i2c->demod); + 0, itv->card_i2c->demod); if (sd) sd->grp_id = 1 << idx; - sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev, + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, mod, type, - itv->card_i2c->tv); + 0, itv->card_i2c->tv); if (sd) sd->grp_id = 1 << idx; return sd ? 0 : -1; @@ -181,11 +181,11 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx) if (!hw_addrs[idx]) return -1; if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) { - sd = v4l2_i2c_new_probed_subdev_addr(&itv->v4l2_dev, - adap, mod, type, hw_addrs[idx]); + sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, + adap, mod, type, 0, I2C_ADDRS(hw_addrs[idx])); } else { sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, - adap, mod, type, hw_addrs[idx]); + adap, mod, type, hw_addrs[idx], NULL); } if (sd) sd->grp_id = 1 << idx; diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index 35890e8b243..3454070e63f 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -186,19 +186,19 @@ static int mxb_probe(struct saa7146_dev *dev) } mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "saa7115", "saa7111", I2C_SAA7111A); + "saa7115", "saa7111", I2C_SAA7111A, NULL); mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "tea6420", "tea6420", I2C_TEA6420_1); + "tea6420", "tea6420", I2C_TEA6420_1, NULL); mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "tea6420", "tea6420", I2C_TEA6420_2); + "tea6420", "tea6420", I2C_TEA6420_2, NULL); mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "tea6415c", "tea6415c", I2C_TEA6415C); + "tea6415c", "tea6415c", I2C_TEA6415C, NULL); mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "tda9840", "tda9840", I2C_TDA9840); + "tda9840", "tda9840", I2C_TDA9840, NULL); mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "tuner", "tuner", I2C_TUNER); + "tuner", "tuner", I2C_TUNER, NULL); if (v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "saa5246a", "saa5246a", I2C_SAA5246A)) { + "saa5246a", "saa5246a", I2C_SAA5246A, NULL)) { printk(KERN_INFO "mxb: found teletext decoder\n"); } diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index cbc388729d7..13639b30270 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -2063,8 +2063,8 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, return -EINVAL; } - /* Note how the 2nd and 3rd arguments are the same for both - * v4l2_i2c_new_subdev() and v4l2_i2c_new_probed_subdev(). Why? + /* Note how the 2nd and 3rd arguments are the same for + * v4l2_i2c_new_subdev(). Why? * Well the 2nd argument is the module name to load, while the 3rd * argument is documented in the framework as being the "chipid" - * and every other place where I can find examples of this, the @@ -2077,15 +2077,15 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, mid, i2caddr[0]); sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, fname, fname, - i2caddr[0]); + i2caddr[0], NULL); } else { pvr2_trace(PVR2_TRACE_INIT, "Module ID %u:" " Setting up with address probe list", mid); - sd = v4l2_i2c_new_probed_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, + sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, fname, fname, - i2caddr); + 0, i2caddr); } if (!sd) { diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 1b29487fd25..14b9ba4579b 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -7208,22 +7208,22 @@ int saa7134_board_init2(struct saa7134_dev *dev) if (dev->radio_type != UNSET) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tuner", "tuner", - dev->radio_addr); + dev->radio_addr, NULL); if (has_demod) - v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); if (dev->tuner_addr == ADDR_UNSET) { enum v4l2_i2c_tuner_type type = has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; - v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(type)); + 0, v4l2_i2c_tuner_addrs(type)); } else { v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tuner", "tuner", - dev->tuner_addr); + dev->tuner_addr, NULL); } } diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index cb78c956d81..f87757fccc7 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -1000,7 +1000,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, struct v4l2_subdev *sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "saa6752hs", "saa6752hs", - saa7134_boards[dev->board].empress_addr); + saa7134_boards[dev->board].empress_addr, NULL); if (sd) sd->grp_id = GRP_EMPRESS; @@ -1009,9 +1009,9 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, if (saa7134_boards[dev->board].rds_addr) { struct v4l2_subdev *sd; - sd = v4l2_i2c_new_probed_subdev_addr(&dev->v4l2_dev, + sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "saa6588", "saa6588", - saa7134_boards[dev->board].rds_addr); + 0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr)); if (sd) { printk(KERN_INFO "%s: found RDS decoder\n", dev->name); dev->has_rds = 1; diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index 1fe5befbbf8..f97fd06d594 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -246,9 +246,9 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision) switch (usbvision_device_data[usbvision->DevModel].Codec) { case CODEC_SAA7113: case CODEC_SAA7111: - v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev, + v4l2_i2c_new_subdev(&usbvision->v4l2_dev, &usbvision->i2c_adap, "saa7115", - "saa7115_auto", saa711x_addrs); + "saa7115_auto", 0, saa711x_addrs); break; } if (usbvision_device_data[usbvision->DevModel].Tuner == 1) { @@ -256,16 +256,16 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision) enum v4l2_i2c_tuner_type type; struct tuner_setup tun_setup; - sd = v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev, + sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev, &usbvision->i2c_adap, "tuner", - "tuner", v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); /* depending on whether we found a demod or not, select the tuner type. */ type = sd ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; - sd = v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev, + sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev, &usbvision->i2c_adap, "tuner", - "tuner", v4l2_i2c_tuner_addrs(type)); + "tuner", 0, v4l2_i2c_tuner_addrs(type)); if (usbvision->tuner_type != -1) { tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 3a0c64935b0..f5a93ae3cdf 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -813,139 +813,6 @@ EXPORT_SYMBOL_GPL(v4l2_i2c_subdev_init); -/* Load an i2c sub-device. */ -struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, - struct i2c_adapter *adapter, - const char *module_name, const char *client_type, u8 addr) -{ - struct v4l2_subdev *sd = NULL; - struct i2c_client *client; - struct i2c_board_info info; - - BUG_ON(!v4l2_dev); - - if (module_name) - request_module(module_name); - - /* Setup the i2c board info with the device type and - the device address. */ - memset(&info, 0, sizeof(info)); - strlcpy(info.type, client_type, sizeof(info.type)); - info.addr = addr; - - /* Create the i2c client */ - client = i2c_new_device(adapter, &info); - /* Note: it is possible in the future that - c->driver is NULL if the driver is still being loaded. - We need better support from the kernel so that we - can easily wait for the load to finish. */ - if (client == NULL || client->driver == NULL) - goto error; - - /* Lock the module so we can safely get the v4l2_subdev pointer */ - if (!try_module_get(client->driver->driver.owner)) - goto error; - sd = i2c_get_clientdata(client); - - /* Register with the v4l2_device which increases the module's - use count as well. */ - if (v4l2_device_register_subdev(v4l2_dev, sd)) - sd = NULL; - /* Decrease the module use count to match the first try_module_get. */ - module_put(client->driver->driver.owner); - - if (sd) { - /* We return errors from v4l2_subdev_call only if we have the - callback as the .s_config is not mandatory */ - int err = v4l2_subdev_call(sd, core, s_config, 0, NULL); - - if (err && err != -ENOIOCTLCMD) { - v4l2_device_unregister_subdev(sd); - sd = NULL; - } - } - -error: - /* If we have a client but no subdev, then something went wrong and - we must unregister the client. */ - if (client && sd == NULL) - i2c_unregister_device(client); - return sd; -} -EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev); - -/* Probe and load an i2c sub-device. */ -struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev, - struct i2c_adapter *adapter, - const char *module_name, const char *client_type, - const unsigned short *addrs) -{ - struct v4l2_subdev *sd = NULL; - struct i2c_client *client = NULL; - struct i2c_board_info info; - - BUG_ON(!v4l2_dev); - - if (module_name) - request_module(module_name); - - /* Setup the i2c board info with the device type and - the device address. */ - memset(&info, 0, sizeof(info)); - strlcpy(info.type, client_type, sizeof(info.type)); - - /* Probe and create the i2c client */ - client = i2c_new_probed_device(adapter, &info, addrs); - /* Note: it is possible in the future that - c->driver is NULL if the driver is still being loaded. - We need better support from the kernel so that we - can easily wait for the load to finish. */ - if (client == NULL || client->driver == NULL) - goto error; - - /* Lock the module so we can safely get the v4l2_subdev pointer */ - if (!try_module_get(client->driver->driver.owner)) - goto error; - sd = i2c_get_clientdata(client); - - /* Register with the v4l2_device which increases the module's - use count as well. */ - if (v4l2_device_register_subdev(v4l2_dev, sd)) - sd = NULL; - /* Decrease the module use count to match the first try_module_get. */ - module_put(client->driver->driver.owner); - - if (sd) { - /* We return errors from v4l2_subdev_call only if we have the - callback as the .s_config is not mandatory */ - int err = v4l2_subdev_call(sd, core, s_config, 0, NULL); - - if (err && err != -ENOIOCTLCMD) { - v4l2_device_unregister_subdev(sd); - sd = NULL; - } - } - -error: - /* If we have a client but no subdev, then something went wrong and - we must unregister the client. */ - if (client && sd == NULL) - i2c_unregister_device(client); - return sd; -} -EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev); - -struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev, - struct i2c_adapter *adapter, - const char *module_name, const char *client_type, u8 addr) -{ - unsigned short addrs[2] = { addr, I2C_CLIENT_END }; - - return v4l2_i2c_new_probed_subdev(v4l2_dev, adapter, - module_name, client_type, addrs); -} -EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev_addr); - /* Load an i2c sub-device. */ struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, struct i2c_adapter *adapter, const char *module_name, diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index f3b6e15d91f..cd6a3446ab7 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -4333,11 +4333,11 @@ static int __init vino_module_init(void) vino_init_stage++; vino_drvdata->decoder = - v4l2_i2c_new_probed_subdev_addr(&vino_drvdata->v4l2_dev, - &vino_i2c_adapter, "saa7191", "saa7191", 0x45); + v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter, + "saa7191", "saa7191", 0, I2C_ADDRS(0x45)); vino_drvdata->camera = - v4l2_i2c_new_probed_subdev_addr(&vino_drvdata->v4l2_dev, - &vino_i2c_adapter, "indycam", "indycam", 0x2b); + v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter, + "indycam", "indycam", 0, I2C_ADDRS(0x2b)); dprintk("init complete!\n"); diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c index 602484dd3da..37fcdc447db 100644 --- a/drivers/media/video/w9968cf.c +++ b/drivers/media/video/w9968cf.c @@ -3515,9 +3515,9 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) w9968cf_turn_on_led(cam); w9968cf_i2c_init(cam); - cam->sensor_sd = v4l2_i2c_new_probed_subdev(&cam->v4l2_dev, + cam->sensor_sd = v4l2_i2c_new_subdev(&cam->v4l2_dev, &cam->i2c_adapter, - "ovcamchip", "ovcamchip", addrs); + "ovcamchip", "ovcamchip", 0, addrs); usb_set_intfdata(intf, cam); mutex_unlock(&cam->dev_mutex); diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 0c4d9b1f8e6..be70574870d 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -1357,15 +1357,15 @@ static int __devinit zoran_probe(struct pci_dev *pdev, goto zr_free_irq; } - zr->decoder = v4l2_i2c_new_probed_subdev(&zr->v4l2_dev, + zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev, &zr->i2c_adapter, zr->card.mod_decoder, zr->card.i2c_decoder, - zr->card.addrs_decoder); + 0, zr->card.addrs_decoder); if (zr->card.mod_encoder) - zr->encoder = v4l2_i2c_new_probed_subdev(&zr->v4l2_dev, + zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev, &zr->i2c_adapter, zr->card.mod_encoder, zr->card.i2c_encoder, - zr->card.addrs_encoder); + 0, zr->card.addrs_encoder); dprintk(2, KERN_INFO "%s: Initializing videocodec bus...\n", diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 33a18426ab9..1c25b10da34 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -139,29 +139,23 @@ struct v4l2_subdev_ops; /* Load an i2c module and return an initialized v4l2_subdev struct. Only call request_module if module_name != NULL. The client_type argument is the name of the chip that's on the adapter. */ -struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, - struct i2c_adapter *adapter, - const char *module_name, const char *client_type, u8 addr); -/* Probe and load an i2c module and return an initialized v4l2_subdev struct. - Only call request_module if module_name != NULL. - The client_type argument is the name of the chip that's on the adapter. */ -struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev, +struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, struct i2c_adapter *adapter, const char *module_name, const char *client_type, - const unsigned short *addrs); -/* Like v4l2_i2c_new_probed_subdev, except probe for a single address. */ -struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev, - struct i2c_adapter *adapter, - const char *module_name, const char *client_type, u8 addr); + int irq, void *platform_data, + u8 addr, const unsigned short *probe_addrs); /* Load an i2c module and return an initialized v4l2_subdev struct. Only call request_module if module_name != NULL. The client_type argument is the name of the chip that's on the adapter. */ -struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, +static inline struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, struct i2c_adapter *adapter, const char *module_name, const char *client_type, - int irq, void *platform_data, - u8 addr, const unsigned short *probe_addrs); + u8 addr, const unsigned short *probe_addrs) +{ + return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, module_name, + client_type, 0, NULL, addr, probe_addrs); +} struct i2c_board_info; -- cgit v1.2.3-70-g09d2 From 7ae0cd9bc793e16d8d68df3c17c601732cc1d3c7 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 19 Jun 2009 11:32:56 -0300 Subject: V4L/DVB (12541): v4l: remove video_register_device_index video_register_device_index is never actually called, instead the stream index number is always calculated automatically. This patch removes this function and simplifies the internal get_index function since that can now always just return the first free index. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/v4l2-framework.txt | 17 +++------ drivers/media/video/v4l2-dev.c | 55 ++++++++-------------------- include/media/v4l2-dev.h | 2 - 3 files changed, 20 insertions(+), 54 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index e395a9cdc53..cb6c7eb5147 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -500,17 +500,11 @@ first free number. Whenever a device node is created some attributes are also created for you. If you look in /sys/class/video4linux you see the devices. Go into e.g. video0 and you will see 'name' and 'index' attributes. The 'name' attribute -is the 'name' field of the video_device struct. The 'index' attribute is -a device node index that can be assigned by the driver, or that is calculated -for you. - -If you call video_register_device(), then the index is just increased by -1 for each device node you register. The first video device node you register -always starts off with 0. +is the 'name' field of the video_device struct. -Alternatively you can call video_register_device_index() which is identical -to video_register_device(), but with an extra index argument. Here you can -pass a specific index value (between 0 and 31) that should be used. +The 'index' attribute is the index of the device node: for each call to +video_register_device() the index is just increased by 1. The first video +device node you register always starts with index 0. Users can setup udev rules that utilize the index attribute to make fancy device names (e.g. 'mpegX' for MPEG video capture device nodes). @@ -520,8 +514,7 @@ After the device was successfully registered, then you can use these fields: - vfl_type: the device type passed to video_register_device. - minor: the assigned device minor number. - num: the device kernel number (i.e. the X in videoX). -- index: the device index number (calculated or set explicitly using - video_register_device_index). +- index: the device index number. If the registration failed, then you need to call video_device_release() to free the allocated video_device struct, or free your own struct if the diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index a7f1b69a7da..1219721894a 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -299,32 +299,28 @@ static const struct file_operations v4l2_fops = { }; /** - * get_index - assign stream number based on parent device + * get_index - assign stream index number based on parent device * @vdev: video_device to assign index number to, vdev->parent should be assigned - * @num: -1 if auto assign, requested number otherwise * * Note that when this is called the new device has not yet been registered - * in the video_device array. + * in the video_device array, but it was able to obtain a minor number. * - * Returns -ENFILE if num is already in use, a free index number if - * successful. + * This means that we can always obtain a free stream index number since + * the worst case scenario is that there are VIDEO_NUM_DEVICES - 1 slots in + * use of the video_device array. + * + * Returns a free index number. */ -static int get_index(struct video_device *vdev, int num) +static int get_index(struct video_device *vdev) { /* This can be static since this function is called with the global videodev_lock held. */ static DECLARE_BITMAP(used, VIDEO_NUM_DEVICES); int i; - if (num >= VIDEO_NUM_DEVICES) { - printk(KERN_ERR "videodev: %s num is too large\n", __func__); - return -EINVAL; - } - - /* Some drivers do not set the parent. In that case always return - num or 0. */ + /* Some drivers do not set the parent. In that case always return 0. */ if (vdev->parent == NULL) - return num >= 0 ? num : 0; + return 0; bitmap_zero(used, VIDEO_NUM_DEVICES); @@ -335,30 +331,15 @@ static int get_index(struct video_device *vdev, int num) } } - if (num >= 0) { - if (test_bit(num, used)) - return -ENFILE; - return num; - } - - i = find_first_zero_bit(used, VIDEO_NUM_DEVICES); - return i == VIDEO_NUM_DEVICES ? -ENFILE : i; + return find_first_zero_bit(used, VIDEO_NUM_DEVICES); } -int video_register_device(struct video_device *vdev, int type, int nr) -{ - return video_register_device_index(vdev, type, nr, -1); -} -EXPORT_SYMBOL(video_register_device); - /** - * video_register_device_index - register video4linux devices + * video_register_device - register video4linux devices * @vdev: video device structure we want to register * @type: type of device to register * @nr: which device number (0 == /dev/video0, 1 == /dev/video1, ... * -1 == first free) - * @index: stream number based on parent device; - * -1 if auto assign, requested number otherwise * * The registration code assigns minor numbers based on the type * requested. -ENFILE is returned in all the device slots for this @@ -377,8 +358,7 @@ EXPORT_SYMBOL(video_register_device); * * %VFL_TYPE_RADIO - A radio card */ -int video_register_device_index(struct video_device *vdev, int type, int nr, - int index) +int video_register_device(struct video_device *vdev, int type, int nr) { int i = 0; int ret; @@ -481,14 +461,9 @@ int video_register_device_index(struct video_device *vdev, int type, int nr, set_bit(nr, video_nums[type]); /* Should not happen since we thought this minor was free */ WARN_ON(video_device[vdev->minor] != NULL); - ret = vdev->index = get_index(vdev, index); + vdev->index = get_index(vdev); mutex_unlock(&videodev_lock); - if (ret < 0) { - printk(KERN_ERR "%s: get_index failed\n", __func__); - goto cleanup; - } - /* Part 3: Initialize the character device */ vdev->cdev = cdev_alloc(); if (vdev->cdev == NULL) { @@ -543,7 +518,7 @@ cleanup: vdev->minor = -1; return ret; } -EXPORT_SYMBOL(video_register_device_index); +EXPORT_SYMBOL(video_register_device); /** * video_unregister_device - unregister a video4linux device diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 2058dd45e91..255f6442b63 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -100,8 +100,6 @@ struct video_device Also note that vdev->minor is set to -1 if the registration failed. */ int __must_check video_register_device(struct video_device *vdev, int type, int nr); -int __must_check video_register_device_index(struct video_device *vdev, - int type, int nr, int index); /* Unregister video devices. Will do nothing if vdev == NULL or vdev->minor < 0. */ -- cgit v1.2.3-70-g09d2 From 22e221258b56cc1a4dc5a9fb2c26f4d6ed9dde81 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 6 Sep 2009 07:13:14 -0300 Subject: V4L/DVB (12722): v4l2-dev: replace 'kernel number' by 'device node number'. The term 'kernel number' is very vague, so replace it with the somewhat more descriptive term 'device node number'. In one place the local variable 'nr' was used to create the device node number of the new device name. This has been replaced with the vdev->num field to more clearly mark this as being the device node number and not the minor number. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/v4l2-framework.txt | 8 +++--- drivers/media/video/v4l2-dev.c | 38 +++++++++++++++------------- 2 files changed, 24 insertions(+), 22 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index cb6c7eb5147..38b3716d864 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -486,14 +486,14 @@ VFL_TYPE_RADIO: radioX for radio tuners VFL_TYPE_VTX: vtxX for teletext devices (deprecated, don't use) The last argument gives you a certain amount of control over the device -kernel number used (i.e. the X in videoX). Normally you will pass -1 to +device node number used (i.e. the X in videoX). Normally you will pass -1 to let the v4l2 framework pick the first free number. But if a driver creates many devices, then it can be useful to have different video devices in separate ranges. For example, video capture devices start at 0, video output devices start at 16. -So you can use the last argument to specify a minimum kernel number and -the v4l2 framework will try to pick the first free number that is equal +So you can use the last argument to specify a minimum device node number +and the v4l2 framework will try to pick the first free number that is equal or higher to what you passed. If that fails, then it will just pick the first free number. @@ -513,7 +513,7 @@ After the device was successfully registered, then you can use these fields: - vfl_type: the device type passed to video_register_device. - minor: the assigned device minor number. -- num: the device kernel number (i.e. the X in videoX). +- num: the device node number (i.e. the X in videoX). - index: the device index number. If the registration failed, then you need to call video_device_release() diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 1219721894a..4e61c77b763 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -66,7 +66,7 @@ static struct device_attribute video_device_attrs[] = { */ static struct video_device *video_device[VIDEO_NUM_DEVICES]; static DEFINE_MUTEX(videodev_lock); -static DECLARE_BITMAP(video_nums[VFL_TYPE_MAX], VIDEO_NUM_DEVICES); +static DECLARE_BITMAP(devnode_nums[VFL_TYPE_MAX], VIDEO_NUM_DEVICES); struct video_device *video_device_alloc(void) { @@ -119,8 +119,8 @@ static void v4l2_device_release(struct device *cd) the release() callback. */ vdev->cdev = NULL; - /* Mark minor as free */ - clear_bit(vdev->num, video_nums[vdev->vfl_type]); + /* Mark device node number as free */ + clear_bit(vdev->num, devnode_nums[vdev->vfl_type]); mutex_unlock(&videodev_lock); @@ -338,13 +338,14 @@ static int get_index(struct video_device *vdev) * video_register_device - register video4linux devices * @vdev: video device structure we want to register * @type: type of device to register - * @nr: which device number (0 == /dev/video0, 1 == /dev/video1, ... + * @nr: which device node number (0 == /dev/video0, 1 == /dev/video1, ... * -1 == first free) * - * The registration code assigns minor numbers based on the type - * requested. -ENFILE is returned in all the device slots for this - * category are full. If not then the minor field is set and the - * driver initialize function is called (if non %NULL). + * The registration code assigns minor numbers and device node numbers + * based on the requested type and registers the new device node with + * the kernel. + * An error is returned if no free minor or device node number could be + * found, or if the registration of the device node failed. * * Zero is returned on success. * @@ -401,7 +402,7 @@ int video_register_device(struct video_device *vdev, int type, int nr) if (vdev->v4l2_dev && vdev->v4l2_dev->dev) vdev->parent = vdev->v4l2_dev->dev; - /* Part 2: find a free minor, kernel number and device index. */ + /* Part 2: find a free minor, device node number and device index. */ #ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES /* Keep the ranges for the first four types for historical * reasons. @@ -432,21 +433,22 @@ int video_register_device(struct video_device *vdev, int type, int nr) } #endif - /* Pick a minor number */ + /* Pick a device node number */ mutex_lock(&videodev_lock); - nr = find_next_zero_bit(video_nums[type], minor_cnt, nr == -1 ? 0 : nr); + nr = find_next_zero_bit(devnode_nums[type], minor_cnt, nr == -1 ? 0 : nr); if (nr == minor_cnt) - nr = find_first_zero_bit(video_nums[type], minor_cnt); + nr = find_first_zero_bit(devnode_nums[type], minor_cnt); if (nr == minor_cnt) { - printk(KERN_ERR "could not get a free kernel number\n"); + printk(KERN_ERR "could not get a free device node number\n"); mutex_unlock(&videodev_lock); return -ENFILE; } #ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES - /* 1-on-1 mapping of kernel number to minor number */ + /* 1-on-1 mapping of device node number to minor number */ i = nr; #else - /* The kernel number and minor numbers are independent */ + /* The device node number and minor numbers are independent, so + we just find the first free minor number. */ for (i = 0; i < VIDEO_NUM_DEVICES; i++) if (video_device[i] == NULL) break; @@ -458,7 +460,7 @@ int video_register_device(struct video_device *vdev, int type, int nr) #endif vdev->minor = i + minor_offset; vdev->num = nr; - set_bit(nr, video_nums[type]); + set_bit(nr, devnode_nums[type]); /* Should not happen since we thought this minor was free */ WARN_ON(video_device[vdev->minor] != NULL); vdev->index = get_index(vdev); @@ -492,7 +494,7 @@ int video_register_device(struct video_device *vdev, int type, int nr) vdev->dev.devt = MKDEV(VIDEO_MAJOR, vdev->minor); if (vdev->parent) vdev->dev.parent = vdev->parent; - dev_set_name(&vdev->dev, "%s%d", name_base, nr); + dev_set_name(&vdev->dev, "%s%d", name_base, vdev->num); ret = device_register(&vdev->dev); if (ret < 0) { printk(KERN_ERR "%s: device_register failed\n", __func__); @@ -512,7 +514,7 @@ cleanup: mutex_lock(&videodev_lock); if (vdev->cdev) cdev_del(vdev->cdev); - clear_bit(vdev->num, video_nums[type]); + clear_bit(vdev->num, devnode_nums[type]); mutex_unlock(&videodev_lock); /* Mark this video device as never having been registered. */ vdev->minor = -1; -- cgit v1.2.3-70-g09d2 From 6b5270d21202fcf6ae16a6266fed83a30ccece7a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 6 Sep 2009 07:54:00 -0300 Subject: V4L/DVB (12725): v4l: warn when desired devnodenr is in use & add _no_warn function Warn when the desired device node number is already in use, except when the new video_register_device_no_warn function is called since in some use-cases that warning is not relevant. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/v4l2-framework.txt | 22 ++++++++++++++++------ drivers/media/video/cx18/cx18-streams.c | 2 +- drivers/media/video/ivtv/ivtv-streams.c | 2 +- drivers/media/video/v4l2-dev.c | 20 +++++++++++++++++++- include/media/v4l2-dev.h | 4 ++++ 5 files changed, 41 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 38b3716d864..b806edaf3e7 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -486,17 +486,27 @@ VFL_TYPE_RADIO: radioX for radio tuners VFL_TYPE_VTX: vtxX for teletext devices (deprecated, don't use) The last argument gives you a certain amount of control over the device -device node number used (i.e. the X in videoX). Normally you will pass -1 to -let the v4l2 framework pick the first free number. But if a driver creates -many devices, then it can be useful to have different video devices in -separate ranges. For example, video capture devices start at 0, video -output devices start at 16. - +device node number used (i.e. the X in videoX). Normally you will pass -1 +to let the v4l2 framework pick the first free number. But sometimes users +want to select a specific node number. It is common that drivers allow +the user to select a specific device node number through a driver module +option. That number is then passed to this function and video_register_device +will attempt to select that device node number. If that number was already +in use, then the next free device node number will be selected and it +will send a warning to the kernel log. + +Another use-case is if a driver creates many devices. In that case it can +be useful to place different video devices in separate ranges. For example, +video capture devices start at 0, video output devices start at 16. So you can use the last argument to specify a minimum device node number and the v4l2 framework will try to pick the first free number that is equal or higher to what you passed. If that fails, then it will just pick the first free number. +Since in this case you do not care about a warning about not being able +to select the specified device node number, you can call the function +video_register_device_no_warn() instead. + Whenever a device node is created some attributes are also created for you. If you look in /sys/class/video4linux you see the devices. Go into e.g. video0 and you will see 'name' and 'index' attributes. The 'name' attribute diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 6c988b95adc..7df513a2dba 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -245,7 +245,7 @@ static int cx18_reg_dev(struct cx18 *cx, int type) video_set_drvdata(s->video_dev, s); /* Register device. First try the desired minor, then any free one. */ - ret = video_register_device(s->video_dev, vfl_type, num); + ret = video_register_device_no_warn(s->video_dev, vfl_type, num); if (ret < 0) { CX18_ERR("Couldn't register v4l2 device for %s (device node number %d)\n", s->name, num); diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index 23400035240..67699e3f2aa 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -261,7 +261,7 @@ static int ivtv_reg_dev(struct ivtv *itv, int type) video_set_drvdata(s->vdev, s); /* Register device. First try the desired minor, then any free one. */ - if (video_register_device(s->vdev, vfl_type, num)) { + if (video_register_device_no_warn(s->vdev, vfl_type, num)) { IVTV_ERR("Couldn't register v4l2 device for %s (device node number %d)\n", s->name, num); video_device_release(s->vdev); diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 4715f08157b..500cbe9891a 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -382,6 +382,8 @@ static int get_index(struct video_device *vdev) * @type: type of device to register * @nr: which device node number (0 == /dev/video0, 1 == /dev/video1, ... * -1 == first free) + * @warn_if_nr_in_use: warn if the desired device node number + * was already in use and another number was chosen instead. * * The registration code assigns minor numbers and device node numbers * based on the requested type and registers the new device node with @@ -401,7 +403,8 @@ static int get_index(struct video_device *vdev) * * %VFL_TYPE_RADIO - A radio card */ -int video_register_device(struct video_device *vdev, int type, int nr) +static int __video_register_device(struct video_device *vdev, int type, int nr, + int warn_if_nr_in_use) { int i = 0; int ret; @@ -547,6 +550,10 @@ int video_register_device(struct video_device *vdev, int type, int nr) reference to the device goes away. */ vdev->dev.release = v4l2_device_release; + if (nr != -1 && nr != vdev->num && warn_if_nr_in_use) + printk(KERN_WARNING "%s: requested %s%d, got %s%d\n", + __func__, name_base, nr, name_base, vdev->num); + /* Part 5: Activate this minor. The char device can now be used. */ mutex_lock(&videodev_lock); video_device[vdev->minor] = vdev; @@ -563,8 +570,19 @@ cleanup: vdev->minor = -1; return ret; } + +int video_register_device(struct video_device *vdev, int type, int nr) +{ + return __video_register_device(vdev, type, nr, 1); +} EXPORT_SYMBOL(video_register_device); +int video_register_device_no_warn(struct video_device *vdev, int type, int nr) +{ + return __video_register_device(vdev, type, nr, 0); +} +EXPORT_SYMBOL(video_register_device_no_warn); + /** * video_unregister_device - unregister a video4linux device * @vdev: the device to unregister diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 255f6442b63..73c9867d744 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -101,6 +101,10 @@ struct video_device Also note that vdev->minor is set to -1 if the registration failed. */ int __must_check video_register_device(struct video_device *vdev, int type, int nr); +/* Same as video_register_device, but no warning is issued if the desired + device node number was already in use. */ +int __must_check video_register_device_no_warn(struct video_device *vdev, int type, int nr); + /* Unregister video devices. Will do nothing if vdev == NULL or vdev->minor < 0. */ void video_unregister_device(struct video_device *vdev); -- cgit v1.2.3-70-g09d2 From 6c119ff493039af862ae57d88d52b4383c9d8ece Mon Sep 17 00:00:00 2001 From: Henk Vergonet Date: Fri, 18 Sep 2009 20:44:37 -0300 Subject: V4L/DVB (13002): Adds support for Zolid Hybrid PCI card: http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner test status analog (PAL-B): - Sometimes picture is noisy, but it becomes crystal clear after switching between channels. (happens for example at 687.25 Mhz) - On a lower frequency (511.25 Mhz) the picture is always sharp, but lacks colour. - No sound problems. - radio untested. Digital: - DVB-T/H stream reception works. - Would expect to see some more channels in the higher frequency region. Overall is the impression that sensitivity still needs improvement both in analog and digital modes. Signed-off-by: Henk Vergonet Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 1 + drivers/media/video/saa7134/saa7134-cards.c | 27 +++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-dvb.c | 29 +++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134.h | 1 + 4 files changed, 58 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 0ac4d254477..2620d60341e 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -171,3 +171,4 @@ 170 -> AverMedia AverTV Studio 505 [1461:a115] 171 -> Beholder BeholdTV X7 [5ace:7595] 172 -> RoverMedia TV Link Pro FM [19d1:0138] +173 -> Zolid Hybrid TV Tuner PCI [1131:2004] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 14b9ba4579b..9210d3ea694 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5257,6 +5257,27 @@ struct saa7134_board saa7134_boards[] = { .amux = TV, }, }, + [SAA7134_BOARD_ZOLID_HYBRID_PCI] = { + .name = "Zolid Hybrid TV Tuner PCI", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 0, + .mpeg = SAA7134_MPEG_DVB, + .ts_type = SAA7134_MPEG_TS_PARALLEL, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + } }, + .radio = { /* untested */ + .name = name_radio, + .amux = TV, + }, + }, }; @@ -6389,6 +6410,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x19d1, /* RoverMedia */ .subdevice = 0x0138, /* LifeView FlyTV Prime30 OEM */ .driver_data = SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2004, + .driver_data = SAA7134_BOARD_ZOLID_HYBRID_PCI, }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 7e1ffd8ba26..a26e997a9ce 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1014,6 +1014,22 @@ static struct tda829x_config tda829x_no_probe = { .probe_tuner = TDA829X_DONT_PROBE, }; +static struct tda10048_config zolid_tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_PARALLEL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, + .disable_gate_access = 1, +}; + +static struct tda18271_config zolid_tda18271_config = { + .gate = TDA18271_GATE_ANALOG, +}; + /* ================================================================== * Core code */ @@ -1488,6 +1504,19 @@ static int dvb_init(struct saa7134_dev *dev) wprintk("%s: No zl10039 found!\n", __func__); + break; + case SAA7134_BOARD_ZOLID_HYBRID_PCI: + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &zolid_tda10048_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &zolid_tda18271_config); + } break; default: wprintk("Huh? unknown DVB card?\n"); diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index d18bb964385..6ee3e9b7769 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -296,6 +296,7 @@ struct saa7134_format { #define SAA7134_BOARD_AVERMEDIA_STUDIO_505 170 #define SAA7134_BOARD_BEHOLD_X7 171 #define SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM 172 +#define SAA7134_BOARD_ZOLID_HYBRID_PCI 173 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 -- cgit v1.2.3-70-g09d2 From 34e383dd13edf402e87bf0a87f4a19b193b4bd7a Mon Sep 17 00:00:00 2001 From: Vladimir Geroy Date: Fri, 18 Sep 2009 18:55:47 -0300 Subject: V4L/DVB (13014): Add support for Compro VideoMate E800 (DVB-T part only) Adding Compro VideoMate E800 (DVB-T part only) Cc: Steven Toth Signed-off-by: Vladimir Geroy Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 1 + drivers/media/video/cx23885/cx23885-cards.c | 12 ++++++++++++ drivers/media/video/cx23885/cx23885-dvb.c | 1 + drivers/media/video/cx23885/cx23885.h | 1 + 4 files changed, 15 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 525edb37c75..5f33d848610 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -23,3 +23,4 @@ 22 -> Mygica X8506 DMB-TH [14f1:8651] 23 -> Magic-Pro ProHDTV Extreme 2 [14f1:8657] 24 -> Hauppauge WinTV-HVR1850 [0070:8541] + 25 -> Compro VideoMate E800 [1858:e800] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 02ba4aec7d9..bfdf79f1033 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -210,6 +210,10 @@ struct cx23885_board cx23885_boards[] = { .portb = CX23885_MPEG_ENCODER, .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_COMPRO_VIDEOMATE_E800] = { + .name = "Compro VideoMate E800", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -341,6 +345,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x8541, .card = CX23885_BOARD_HAUPPAUGE_HVR1850, + }, { + .subvendor = 0x1858, + .subdevice = 0xe800, + .card = CX23885_BOARD_COMPRO_VIDEOMATE_E800, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -536,6 +544,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: /* Tuner Reset Command */ bitmask = 0x04; break; @@ -687,6 +696,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) break; case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: /* GPIO-2 xc3028 tuner reset */ /* The following GPIO's are on the internal AVCore (cx25840) */ @@ -911,6 +921,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1255: case CX23885_BOARD_HAUPPAUGE_HVR1210: case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ @@ -927,6 +938,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[2].i2c_adap, "cx25840", "cx25840", 0x88 >> 1, NULL); diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 2519b27a370..45e13ee66dc 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -747,6 +747,7 @@ static int dvb_register(struct cx23885_tsport *port) } case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: i2c_bus = &dev->i2c_bus[0]; fe0->dvb.frontend = dvb_attach(zl10353_attach, diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index bee689104a2..cc7a165561f 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -78,6 +78,7 @@ #define CX23885_BOARD_MYGICA_X8506 22 #define CX23885_BOARD_MAGICPRO_PROHDTVE2 23 #define CX23885_BOARD_HAUPPAUGE_HVR1850 24 +#define CX23885_BOARD_COMPRO_VIDEOMATE_E800 25 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- cgit v1.2.3-70-g09d2 From 06777be6d8688ba93103fffbbe9e64a5e6fab3c8 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 12 Sep 2009 15:22:15 -0300 Subject: thinkpad-acpi: deprecate hotkey_bios_mask Some analysis of the ACPI DSDTs shows that the HKEY pre-enabled mask is always 0x80c (FN+F3,FN+F4 and FN+F12), which are the hotkeys that the second gen of HKEY firmware supported (the first gen didn't report any hotkeys, the second reported these tree hotkeys but had no mask support, and the third added mask support). So, this is probably some sort of backwards compatibility with older versions of the IBM ThinkVantage suite. We have no use for that, and I know of exactly ZERO users of that attribute, anyway. Start the process of getting rid of it. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/laptops/thinkpad-acpi.txt | 6 +++++- drivers/platform/x86/thinkpad_acpi.c | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index e2ddcdeb61b..ab4b58eaa7f 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -240,9 +240,13 @@ sysfs notes: Returns 0. hotkey_bios_mask: + DEPRECATED, DON'T USE, WILL BE REMOVED IN THE FUTURE. + Returns the hot keys mask when thinkpad-acpi was loaded. Upon module unload, the hot keys mask will be restored - to this value. + to this value. This is always 0x80c, because those are + the hotkeys that were supported by ancient firmware + without mask support. hotkey_enable: DEPRECATED, WILL BE REMOVED SOON. diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 679a73b4319..6b667891fc3 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -2544,6 +2544,8 @@ static ssize_t hotkey_bios_mask_show(struct device *dev, struct device_attribute *attr, char *buf) { + printk_deprecated_attribute("hotkey_bios_mask", + "This attribute is useless."); return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_orig_mask); } -- cgit v1.2.3-70-g09d2 From 20c9aa46f644b3ddb161a819d1b0c2b07097c4ee Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 12 Sep 2009 15:22:16 -0300 Subject: thinkpad-acpi: Fix procfs hotkey reset command echo "reset" > /proc/acpi/ibm/hotkey should do something non-useless, so instead of setting it to Fn+F2, Fn+F3, Fn+F5, set it to hotkey_recommended_mask. It is not like it will survive for much longer, anyway. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/laptops/thinkpad-acpi.txt | 2 +- drivers/platform/x86/thinkpad_acpi.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index ab4b58eaa7f..6d03487ef1c 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -219,7 +219,7 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file: echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys ... any other 8-hex-digit mask ... - echo reset > /proc/acpi/ibm/hotkey -- restore the original mask + echo reset > /proc/acpi/ibm/hotkey -- restore the recommended mask The following commands have been deprecated and will cause the kernel to log a warning: diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 6b667891fc3..dd779e54894 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -3569,7 +3569,8 @@ static int hotkey_write(char *buf) hotkey_enabledisable_warn(0); res = -EPERM; } else if (strlencmp(cmd, "reset") == 0) { - mask = hotkey_orig_mask; + mask = (hotkey_all_mask | hotkey_source_mask) + & ~hotkey_reserved_mask; } else if (sscanf(cmd, "0x%x", &mask) == 1) { /* mask set */ } else if (sscanf(cmd, "%x", &mask) == 1) { -- cgit v1.2.3-70-g09d2 From de584afa5e188a2da484bb5373d449598cdb9f5e Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 18 Sep 2009 12:41:09 -0700 Subject: hwmon driver for ACPI 4.0 power meters This driver exposes ACPI 4.0 compliant power meters as hardware monitoring devices. This second revision of the driver also exports the ACPI string info as sysfs attributes, a list of the devices that the meter measures, and will send ACPI notifications over the ACPI netlink socket. This latest revision only enables the power capping controls if it can be confirmed that the power cap can be enforced by the hardware and explains how the notification interfaces work. [akpm@linux-foundation.org: remove default-y] [akpm@linux-foundation.org: build fix] Signed-off-by: Darrick J. Wong Cc: Zhang Rui Cc: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- Documentation/hwmon/acpi_power_meter | 51 ++ drivers/acpi/Kconfig | 11 + drivers/acpi/Makefile | 1 + drivers/acpi/power_meter.c | 1018 ++++++++++++++++++++++++++++++++++ 4 files changed, 1081 insertions(+) create mode 100644 Documentation/hwmon/acpi_power_meter create mode 100644 drivers/acpi/power_meter.c (limited to 'Documentation') diff --git a/Documentation/hwmon/acpi_power_meter b/Documentation/hwmon/acpi_power_meter new file mode 100644 index 00000000000..c80399a00c5 --- /dev/null +++ b/Documentation/hwmon/acpi_power_meter @@ -0,0 +1,51 @@ +Kernel driver power_meter +========================= + +This driver talks to ACPI 4.0 power meters. + +Supported systems: + * Any recent system with ACPI 4.0. + Prefix: 'power_meter' + Datasheet: http://acpi.info/, section 10.4. + +Author: Darrick J. Wong + +Description +----------- + +This driver implements sensor reading support for the power meters exposed in +the ACPI 4.0 spec (Chapter 10.4). These devices have a simple set of +features--a power meter that returns average power use over a configurable +interval, an optional capping mechanism, and a couple of trip points. The +sysfs interface conforms with the specification outlined in the "Power" section +of Documentation/hwmon/sysfs-interface. + +Special Features +---------------- + +The power[1-*]_is_battery knob indicates if the power supply is a battery. +Both power[1-*]_average_{min,max} must be set before the trip points will work. +When both of them are set, an ACPI event will be broadcast on the ACPI netlink +socket and a poll notification will be sent to the appropriate +power[1-*]_average sysfs file. + +The power[1-*]_{model_number, serial_number, oem_info} fields display arbitrary +strings that ACPI provides with the meter. The measures/ directory contains +symlinks to the devices that this meter measures. + +Some computers have the ability to enforce a power cap in hardware. If this is +the case, the power[1-*]_cap and related sysfs files will appear. When the +average power consumption exceeds the cap, an ACPI event will be broadcast on +the netlink event socket and a poll notification will be sent to the +appropriate power[1-*]_alarm file to indicate that capping has begun, and the +hardware has taken action to reduce power consumption. Most likely this will +result in reduced performance. + +There are a few other ACPI notifications that can be sent by the firmware. In +all cases the ACPI event will be broadcast on the ACPI netlink event socket as +well as sent as a poll notification to a sysfs file. The events are as +follows: + +power[1-*]_cap will be notified if the firmware changes the power cap. +power[1-*]_interval will be notified if the firmware changes the averaging +interval. diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 7ec7d88c599..2c1cab5642f 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -82,6 +82,17 @@ config ACPI_PROCFS_POWER Say N to delete power /proc/acpi/ directories that have moved to /sys/ +config ACPI_POWER_METER + tristate "ACPI 4.0 power meter" + depends on HWMON + help + This driver exposes ACPI 4.0 power meters as hardware monitoring + devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware + and a power meter. + + To compile this driver as a module, choose M here: + the module will be called power-meter. + config ACPI_SYSFS_POWER bool "Future power /sys interface" select POWER_SUPPLY diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 03a985be3fe..82cd49dc603 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o obj-$(CONFIG_ACPI_BATTERY) += battery.o obj-$(CONFIG_ACPI_SBS) += sbshc.o obj-$(CONFIG_ACPI_SBS) += sbs.o +obj-$(CONFIG_ACPI_POWER_METER) += power_meter.o # processor has its own "processor." module_param namespace processor-y := processor_core.o processor_throttling.o diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c new file mode 100644 index 00000000000..e6bfd77986b --- /dev/null +++ b/drivers/acpi/power_meter.c @@ -0,0 +1,1018 @@ +/* + * A hwmon driver for ACPI 4.0 power meters + * Copyright (C) 2009 IBM + * + * Author: Darrick J. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ACPI_POWER_METER_NAME "power_meter" +ACPI_MODULE_NAME(ACPI_POWER_METER_NAME); +#define ACPI_POWER_METER_DEVICE_NAME "Power Meter" +#define ACPI_POWER_METER_CLASS "power_meter_resource" + +#define NUM_SENSORS 17 + +#define POWER_METER_CAN_MEASURE (1 << 0) +#define POWER_METER_CAN_TRIP (1 << 1) +#define POWER_METER_CAN_CAP (1 << 2) +#define POWER_METER_CAN_NOTIFY (1 << 3) +#define POWER_METER_IS_BATTERY (1 << 8) +#define UNKNOWN_HYSTERESIS 0xFFFFFFFF + +#define METER_NOTIFY_CONFIG 0x80 +#define METER_NOTIFY_TRIP 0x81 +#define METER_NOTIFY_CAP 0x82 +#define METER_NOTIFY_CAPPING 0x83 +#define METER_NOTIFY_INTERVAL 0x84 + +#define POWER_AVERAGE_NAME "power1_average" +#define POWER_CAP_NAME "power1_cap" +#define POWER_AVG_INTERVAL_NAME "power1_average_interval" +#define POWER_ALARM_NAME "power1_alarm" + +static int cap_in_hardware; +static int force_cap_on; + +static int can_cap_in_hardware(void) +{ + return force_cap_on || cap_in_hardware; +} + +static struct acpi_device_id power_meter_ids[] = { + {"ACPI000D", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, power_meter_ids); + +struct acpi_power_meter_capabilities { + acpi_integer flags; + acpi_integer units; + acpi_integer type; + acpi_integer accuracy; + acpi_integer sampling_time; + acpi_integer min_avg_interval; + acpi_integer max_avg_interval; + acpi_integer hysteresis; + acpi_integer configurable_cap; + acpi_integer min_cap; + acpi_integer max_cap; +}; + +struct acpi_power_meter_resource { + struct acpi_device *acpi_dev; + acpi_bus_id name; + struct mutex lock; + struct device *hwmon_dev; + struct acpi_power_meter_capabilities caps; + acpi_string model_number; + acpi_string serial_number; + acpi_string oem_info; + acpi_integer power; + acpi_integer cap; + acpi_integer avg_interval; + int sensors_valid; + unsigned long sensors_last_updated; + struct sensor_device_attribute sensors[NUM_SENSORS]; + int num_sensors; + int trip[2]; + int num_domain_devices; + struct acpi_device **domain_devices; + struct kobject *holders_dir; +}; + +struct ro_sensor_template { + char *label; + ssize_t (*show)(struct device *dev, + struct device_attribute *devattr, + char *buf); + int index; +}; + +struct rw_sensor_template { + char *label; + ssize_t (*show)(struct device *dev, + struct device_attribute *devattr, + char *buf); + ssize_t (*set)(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count); + int index; +}; + +/* Averaging interval */ +static int update_avg_interval(struct acpi_power_meter_resource *resource) +{ + unsigned long long data; + acpi_status status; + + status = acpi_evaluate_integer(resource->acpi_dev->handle, "_GAI", + NULL, &data); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Evaluating _GAI")); + return -ENODEV; + } + + resource->avg_interval = data; + return 0; +} + +static ssize_t show_avg_interval(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct acpi_device *acpi_dev = to_acpi_device(dev); + struct acpi_power_meter_resource *resource = acpi_dev->driver_data; + + mutex_lock(&resource->lock); + update_avg_interval(resource); + mutex_unlock(&resource->lock); + + return sprintf(buf, "%llu\n", resource->avg_interval); +} + +static ssize_t set_avg_interval(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct acpi_device *acpi_dev = to_acpi_device(dev); + struct acpi_power_meter_resource *resource = acpi_dev->driver_data; + union acpi_object arg0 = { ACPI_TYPE_INTEGER }; + struct acpi_object_list args = { 1, &arg0 }; + int res; + unsigned long temp; + unsigned long long data; + acpi_status status; + + res = strict_strtoul(buf, 10, &temp); + if (res) + return res; + + if (temp > resource->caps.max_avg_interval || + temp < resource->caps.min_avg_interval) + return -EINVAL; + arg0.integer.value = temp; + + mutex_lock(&resource->lock); + status = acpi_evaluate_integer(resource->acpi_dev->handle, "_PAI", + &args, &data); + if (!ACPI_FAILURE(status)) + resource->avg_interval = temp; + mutex_unlock(&resource->lock); + + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PAI")); + return -EINVAL; + } + + /* _PAI returns 0 on success, nonzero otherwise */ + if (data) + return -EINVAL; + + return count; +} + +/* Cap functions */ +static int update_cap(struct acpi_power_meter_resource *resource) +{ + unsigned long long data; + acpi_status status; + + status = acpi_evaluate_integer(resource->acpi_dev->handle, "_GHL", + NULL, &data); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Evaluating _GHL")); + return -ENODEV; + } + + resource->cap = data; + return 0; +} + +static ssize_t show_cap(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct acpi_device *acpi_dev = to_acpi_device(dev); + struct acpi_power_meter_resource *resource = acpi_dev->driver_data; + + mutex_lock(&resource->lock); + update_cap(resource); + mutex_unlock(&resource->lock); + + return sprintf(buf, "%llu\n", resource->cap * 1000); +} + +static ssize_t set_cap(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct acpi_device *acpi_dev = to_acpi_device(dev); + struct acpi_power_meter_resource *resource = acpi_dev->driver_data; + union acpi_object arg0 = { ACPI_TYPE_INTEGER }; + struct acpi_object_list args = { 1, &arg0 }; + int res; + unsigned long temp; + unsigned long long data; + acpi_status status; + + res = strict_strtoul(buf, 10, &temp); + if (res) + return res; + + temp /= 1000; + if (temp > resource->caps.max_cap || temp < resource->caps.min_cap) + return -EINVAL; + arg0.integer.value = temp; + + mutex_lock(&resource->lock); + status = acpi_evaluate_integer(resource->acpi_dev->handle, "_SHL", + &args, &data); + if (!ACPI_FAILURE(status)) + resource->cap = temp; + mutex_unlock(&resource->lock); + + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Evaluating _SHL")); + return -EINVAL; + } + + /* _SHL returns 0 on success, nonzero otherwise */ + if (data) + return -EINVAL; + + return count; +} + +/* Power meter trip points */ +static int set_acpi_trip(struct acpi_power_meter_resource *resource) +{ + union acpi_object arg_objs[] = { + {ACPI_TYPE_INTEGER}, + {ACPI_TYPE_INTEGER} + }; + struct acpi_object_list args = { 2, arg_objs }; + unsigned long long data; + acpi_status status; + + /* Both trip levels must be set */ + if (resource->trip[0] < 0 || resource->trip[1] < 0) + return 0; + + /* This driver stores min, max; ACPI wants max, min. */ + arg_objs[0].integer.value = resource->trip[1]; + arg_objs[1].integer.value = resource->trip[0]; + + status = acpi_evaluate_integer(resource->acpi_dev->handle, "_PTP", + &args, &data); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PTP")); + return -EINVAL; + } + + return data; +} + +static ssize_t set_trip(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct acpi_device *acpi_dev = to_acpi_device(dev); + struct acpi_power_meter_resource *resource = acpi_dev->driver_data; + int res; + unsigned long temp; + + res = strict_strtoul(buf, 10, &temp); + if (res) + return res; + + temp /= 1000; + if (temp < 0) + return -EINVAL; + + mutex_lock(&resource->lock); + resource->trip[attr->index - 7] = temp; + res = set_acpi_trip(resource); + mutex_unlock(&resource->lock); + + if (res) + return res; + + return count; +} + +/* Power meter */ +static int update_meter(struct acpi_power_meter_resource *resource) +{ + unsigned long long data; + acpi_status status; + unsigned long local_jiffies = jiffies; + + if (time_before(local_jiffies, resource->sensors_last_updated + + msecs_to_jiffies(resource->caps.sampling_time)) && + resource->sensors_valid) + return 0; + + status = acpi_evaluate_integer(resource->acpi_dev->handle, "_PMM", + NULL, &data); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PMM")); + return -ENODEV; + } + + resource->power = data; + resource->sensors_valid = 1; + resource->sensors_last_updated = jiffies; + return 0; +} + +static ssize_t show_power(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct acpi_device *acpi_dev = to_acpi_device(dev); + struct acpi_power_meter_resource *resource = acpi_dev->driver_data; + + mutex_lock(&resource->lock); + update_meter(resource); + mutex_unlock(&resource->lock); + + return sprintf(buf, "%llu\n", resource->power * 1000); +} + +/* Miscellaneous */ +static ssize_t show_str(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct acpi_device *acpi_dev = to_acpi_device(dev); + struct acpi_power_meter_resource *resource = acpi_dev->driver_data; + acpi_string val; + + switch (attr->index) { + case 0: + val = resource->model_number; + break; + case 1: + val = resource->serial_number; + break; + case 2: + val = resource->oem_info; + break; + default: + BUG(); + } + + return sprintf(buf, "%s\n", val); +} + +static ssize_t show_val(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct acpi_device *acpi_dev = to_acpi_device(dev); + struct acpi_power_meter_resource *resource = acpi_dev->driver_data; + acpi_integer val = 0; + + switch (attr->index) { + case 0: + val = resource->caps.min_avg_interval; + break; + case 1: + val = resource->caps.max_avg_interval; + break; + case 2: + val = resource->caps.min_cap * 1000; + break; + case 3: + val = resource->caps.max_cap * 1000; + break; + case 4: + if (resource->caps.hysteresis == UNKNOWN_HYSTERESIS) + return sprintf(buf, "unknown\n"); + + val = resource->caps.hysteresis * 1000; + break; + case 5: + if (resource->caps.flags & POWER_METER_IS_BATTERY) + val = 1; + else + val = 0; + break; + case 6: + if (resource->power > resource->cap) + val = 1; + else + val = 0; + break; + case 7: + case 8: + if (resource->trip[attr->index - 7] < 0) + return sprintf(buf, "unknown\n"); + + val = resource->trip[attr->index - 7] * 1000; + break; + default: + BUG(); + } + + return sprintf(buf, "%llu\n", val); +} + +static ssize_t show_accuracy(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct acpi_device *acpi_dev = to_acpi_device(dev); + struct acpi_power_meter_resource *resource = acpi_dev->driver_data; + unsigned int acc = resource->caps.accuracy; + + return sprintf(buf, "%u.%u%%\n", acc / 1000, acc % 1000); +} + +static ssize_t show_name(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + return sprintf(buf, "%s\n", ACPI_POWER_METER_NAME); +} + +/* Sensor descriptions. If you add a sensor, update NUM_SENSORS above! */ +static struct ro_sensor_template meter_ro_attrs[] = { +{POWER_AVERAGE_NAME, show_power, 0}, +{"power1_accuracy", show_accuracy, 0}, +{"power1_average_interval_min", show_val, 0}, +{"power1_average_interval_max", show_val, 1}, +{"power1_is_battery", show_val, 5}, +{NULL, NULL, 0}, +}; + +static struct rw_sensor_template meter_rw_attrs[] = { +{POWER_AVG_INTERVAL_NAME, show_avg_interval, set_avg_interval, 0}, +{NULL, NULL, NULL, 0}, +}; + +static struct ro_sensor_template misc_cap_attrs[] = { +{"power1_cap_min", show_val, 2}, +{"power1_cap_max", show_val, 3}, +{"power1_cap_hyst", show_val, 4}, +{POWER_ALARM_NAME, show_val, 6}, +{NULL, NULL, 0}, +}; + +static struct ro_sensor_template ro_cap_attrs[] = { +{POWER_CAP_NAME, show_cap, 0}, +{NULL, NULL, 0}, +}; + +static struct rw_sensor_template rw_cap_attrs[] = { +{POWER_CAP_NAME, show_cap, set_cap, 0}, +{NULL, NULL, NULL, 0}, +}; + +static struct rw_sensor_template trip_attrs[] = { +{"power1_average_min", show_val, set_trip, 7}, +{"power1_average_max", show_val, set_trip, 8}, +{NULL, NULL, NULL, 0}, +}; + +static struct ro_sensor_template misc_attrs[] = { +{"name", show_name, 0}, +{"power1_model_number", show_str, 0}, +{"power1_oem_info", show_str, 2}, +{"power1_serial_number", show_str, 1}, +{NULL, NULL, 0}, +}; + +/* Read power domain data */ +static void remove_domain_devices(struct acpi_power_meter_resource *resource) +{ + int i; + + if (!resource->num_domain_devices) + return; + + for (i = 0; i < resource->num_domain_devices; i++) { + struct acpi_device *obj = resource->domain_devices[i]; + if (!obj) + continue; + + sysfs_remove_link(resource->holders_dir, + kobject_name(&obj->dev.kobj)); + put_device(&obj->dev); + } + + kfree(resource->domain_devices); + kobject_put(resource->holders_dir); +} + +static int read_domain_devices(struct acpi_power_meter_resource *resource) +{ + int res = 0; + int i; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *pss; + acpi_status status; + + status = acpi_evaluate_object(resource->acpi_dev->handle, "_PMD", NULL, + &buffer); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PMD")); + return -ENODEV; + } + + pss = buffer.pointer; + if (!pss || + pss->type != ACPI_TYPE_PACKAGE) { + dev_err(&resource->acpi_dev->dev, ACPI_POWER_METER_NAME + "Invalid _PMD data\n"); + res = -EFAULT; + goto end; + } + + if (!pss->package.count) + goto end; + + resource->domain_devices = kzalloc(sizeof(struct acpi_device *) * + pss->package.count, GFP_KERNEL); + if (!resource->domain_devices) { + res = -ENOMEM; + goto end; + } + + resource->holders_dir = kobject_create_and_add("measures", + &resource->acpi_dev->dev.kobj); + if (!resource->holders_dir) { + res = -ENOMEM; + goto exit_free; + } + + resource->num_domain_devices = pss->package.count; + + for (i = 0; i < pss->package.count; i++) { + struct acpi_device *obj; + union acpi_object *element = &(pss->package.elements[i]); + + /* Refuse non-references */ + if (element->type != ACPI_TYPE_LOCAL_REFERENCE) + continue; + + /* Create a symlink to domain objects */ + resource->domain_devices[i] = NULL; + status = acpi_bus_get_device(element->reference.handle, + &resource->domain_devices[i]); + if (ACPI_FAILURE(status)) + continue; + + obj = resource->domain_devices[i]; + get_device(&obj->dev); + + res = sysfs_create_link(resource->holders_dir, &obj->dev.kobj, + kobject_name(&obj->dev.kobj)); + if (res) { + put_device(&obj->dev); + resource->domain_devices[i] = NULL; + } + } + + res = 0; + goto end; + +exit_free: + kfree(resource->domain_devices); +end: + kfree(buffer.pointer); + return res; +} + +/* Registration and deregistration */ +static int register_ro_attrs(struct acpi_power_meter_resource *resource, + struct ro_sensor_template *ro) +{ + struct device *dev = &resource->acpi_dev->dev; + struct sensor_device_attribute *sensors = + &resource->sensors[resource->num_sensors]; + int res = 0; + + while (ro->label) { + sensors->dev_attr.attr.name = ro->label; + sensors->dev_attr.attr.mode = S_IRUGO; + sensors->dev_attr.show = ro->show; + sensors->index = ro->index; + + res = device_create_file(dev, &sensors->dev_attr); + if (res) { + sensors->dev_attr.attr.name = NULL; + goto error; + } + sensors++; + resource->num_sensors++; + ro++; + } + +error: + return res; +} + +static int register_rw_attrs(struct acpi_power_meter_resource *resource, + struct rw_sensor_template *rw) +{ + struct device *dev = &resource->acpi_dev->dev; + struct sensor_device_attribute *sensors = + &resource->sensors[resource->num_sensors]; + int res = 0; + + while (rw->label) { + sensors->dev_attr.attr.name = rw->label; + sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR; + sensors->dev_attr.show = rw->show; + sensors->dev_attr.store = rw->set; + sensors->index = rw->index; + + res = device_create_file(dev, &sensors->dev_attr); + if (res) { + sensors->dev_attr.attr.name = NULL; + goto error; + } + sensors++; + resource->num_sensors++; + rw++; + } + +error: + return res; +} + +static void remove_attrs(struct acpi_power_meter_resource *resource) +{ + int i; + + for (i = 0; i < resource->num_sensors; i++) { + if (!resource->sensors[i].dev_attr.attr.name) + continue; + device_remove_file(&resource->acpi_dev->dev, + &resource->sensors[i].dev_attr); + } + + remove_domain_devices(resource); + + resource->num_sensors = 0; +} + +static int setup_attrs(struct acpi_power_meter_resource *resource) +{ + int res = 0; + + res = read_domain_devices(resource); + if (res) + return res; + + if (resource->caps.flags & POWER_METER_CAN_MEASURE) { + res = register_ro_attrs(resource, meter_ro_attrs); + if (res) + goto error; + res = register_rw_attrs(resource, meter_rw_attrs); + if (res) + goto error; + } + + if (resource->caps.flags & POWER_METER_CAN_CAP) { + if (!can_cap_in_hardware()) { + dev_err(&resource->acpi_dev->dev, + "Ignoring unsafe software power cap!\n"); + goto skip_unsafe_cap; + } + + if (resource->caps.configurable_cap) { + res = register_rw_attrs(resource, rw_cap_attrs); + if (res) + goto error; + } else { + res = register_ro_attrs(resource, ro_cap_attrs); + if (res) + goto error; + } + res = register_ro_attrs(resource, misc_cap_attrs); + if (res) + goto error; + } +skip_unsafe_cap: + + if (resource->caps.flags & POWER_METER_CAN_TRIP) { + res = register_rw_attrs(resource, trip_attrs); + if (res) + goto error; + } + + res = register_ro_attrs(resource, misc_attrs); + if (res) + goto error; + + return res; +error: + remove_domain_devices(resource); + remove_attrs(resource); + return res; +} + +static void free_capabilities(struct acpi_power_meter_resource *resource) +{ + acpi_string *str; + int i; + + str = &resource->model_number; + for (i = 0; i < 3; i++, str++) + kfree(*str); +} + +static int read_capabilities(struct acpi_power_meter_resource *resource) +{ + int res = 0; + int i; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer state = { 0, NULL }; + struct acpi_buffer format = { sizeof("NNNNNNNNNNN"), "NNNNNNNNNNN" }; + union acpi_object *pss; + acpi_string *str; + acpi_status status; + + status = acpi_evaluate_object(resource->acpi_dev->handle, "_PMC", NULL, + &buffer); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PMC")); + return -ENODEV; + } + + pss = buffer.pointer; + if (!pss || + pss->type != ACPI_TYPE_PACKAGE || + pss->package.count != 14) { + dev_err(&resource->acpi_dev->dev, ACPI_POWER_METER_NAME + "Invalid _PMC data\n"); + res = -EFAULT; + goto end; + } + + /* Grab all the integer data at once */ + state.length = sizeof(struct acpi_power_meter_capabilities); + state.pointer = &resource->caps; + + status = acpi_extract_package(pss, &format, &state); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Invalid data")); + res = -EFAULT; + goto end; + } + + if (resource->caps.units) { + dev_err(&resource->acpi_dev->dev, ACPI_POWER_METER_NAME + "Unknown units %llu.\n", + resource->caps.units); + res = -EINVAL; + goto end; + } + + /* Grab the string data */ + str = &resource->model_number; + + for (i = 11; i < 14; i++) { + union acpi_object *element = &(pss->package.elements[i]); + + if (element->type != ACPI_TYPE_STRING) { + res = -EINVAL; + goto error; + } + + *str = kzalloc(sizeof(u8) * (element->string.length + 1), + GFP_KERNEL); + if (!*str) { + res = -ENOMEM; + goto error; + } + + strncpy(*str, element->string.pointer, element->string.length); + str++; + } + + dev_info(&resource->acpi_dev->dev, "Found ACPI power meter.\n"); + goto end; +error: + str = &resource->model_number; + for (i = 0; i < 3; i++, str++) + kfree(*str); +end: + kfree(buffer.pointer); + return res; +} + +/* Handle ACPI event notifications */ +static void acpi_power_meter_notify(struct acpi_device *device, u32 event) +{ + struct acpi_power_meter_resource *resource; + int res; + + if (!device || !acpi_driver_data(device)) + return; + + resource = acpi_driver_data(device); + + mutex_lock(&resource->lock); + switch (event) { + case METER_NOTIFY_CONFIG: + free_capabilities(resource); + res = read_capabilities(resource); + if (res) + break; + + remove_attrs(resource); + setup_attrs(resource); + break; + case METER_NOTIFY_TRIP: + sysfs_notify(&device->dev.kobj, NULL, POWER_AVERAGE_NAME); + update_meter(resource); + break; + case METER_NOTIFY_CAP: + sysfs_notify(&device->dev.kobj, NULL, POWER_CAP_NAME); + update_cap(resource); + break; + case METER_NOTIFY_INTERVAL: + sysfs_notify(&device->dev.kobj, NULL, POWER_AVG_INTERVAL_NAME); + update_avg_interval(resource); + break; + case METER_NOTIFY_CAPPING: + sysfs_notify(&device->dev.kobj, NULL, POWER_ALARM_NAME); + dev_info(&device->dev, "Capping in progress.\n"); + break; + default: + BUG(); + } + mutex_unlock(&resource->lock); + + acpi_bus_generate_netlink_event(ACPI_POWER_METER_CLASS, + dev_name(&device->dev), event, 0); +} + +static int acpi_power_meter_add(struct acpi_device *device) +{ + int res; + struct acpi_power_meter_resource *resource; + + if (!device) + return -EINVAL; + + resource = kzalloc(sizeof(struct acpi_power_meter_resource), + GFP_KERNEL); + if (!resource) + return -ENOMEM; + + resource->sensors_valid = 0; + resource->acpi_dev = device; + mutex_init(&resource->lock); + strcpy(acpi_device_name(device), ACPI_POWER_METER_DEVICE_NAME); + strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS); + device->driver_data = resource; + + free_capabilities(resource); + res = read_capabilities(resource); + if (res) + goto exit_free; + + resource->trip[0] = resource->trip[1] = -1; + + res = setup_attrs(resource); + if (res) + goto exit_free; + + resource->hwmon_dev = hwmon_device_register(&device->dev); + if (IS_ERR(resource->hwmon_dev)) { + res = PTR_ERR(resource->hwmon_dev); + goto exit_remove; + } + + res = 0; + goto exit; + +exit_remove: + remove_attrs(resource); +exit_free: + kfree(resource); +exit: + return res; +} + +static int acpi_power_meter_remove(struct acpi_device *device, int type) +{ + struct acpi_power_meter_resource *resource; + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + + resource = acpi_driver_data(device); + hwmon_device_unregister(resource->hwmon_dev); + + free_capabilities(resource); + remove_attrs(resource); + + kfree(resource); + return 0; +} + +static int acpi_power_meter_resume(struct acpi_device *device) +{ + struct acpi_power_meter_resource *resource; + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + + resource = acpi_driver_data(device); + free_capabilities(resource); + read_capabilities(resource); + + return 0; +} + +static struct acpi_driver acpi_power_meter_driver = { + .name = "power_meter", + .class = ACPI_POWER_METER_CLASS, + .ids = power_meter_ids, + .ops = { + .add = acpi_power_meter_add, + .remove = acpi_power_meter_remove, + .resume = acpi_power_meter_resume, + .notify = acpi_power_meter_notify, + }, +}; + +/* Module init/exit routines */ +static int __init enable_cap_knobs(const struct dmi_system_id *d) +{ + cap_in_hardware = 1; + return 0; +} + +static struct dmi_system_id __initdata pm_dmi_table[] = { + { + enable_cap_knobs, "IBM Active Energy Manager", + { + DMI_MATCH(DMI_SYS_VENDOR, "IBM") + }, + }, + {} +}; + +static int __init acpi_power_meter_init(void) +{ + int result; + + if (acpi_disabled) + return -ENODEV; + + dmi_check_system(pm_dmi_table); + + result = acpi_bus_register_driver(&acpi_power_meter_driver); + if (result < 0) + return -ENODEV; + + return 0; +} + +static void __exit acpi_power_meter_exit(void) +{ + acpi_bus_unregister_driver(&acpi_power_meter_driver); +} + +MODULE_AUTHOR("Darrick J. Wong "); +MODULE_DESCRIPTION("ACPI 4.0 power meter driver"); +MODULE_LICENSE("GPL"); + +module_param(force_cap_on, bool, 0644); +MODULE_PARM_DESC(force_cap_on, "Enable power cap even it is unsafe to do so."); + +module_init(acpi_power_meter_init); +module_exit(acpi_power_meter_exit); -- cgit v1.2.3-70-g09d2 From 6161352142d5fed4cd753b32e5ccde66e705b14e Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 17 Sep 2009 16:11:28 +0200 Subject: tracing, perf: Convert the power tracer into an event tracer This patch converts the existing power tracer into an event tracer, so that power events (C states and frequency changes) can be tracked via "perf". This also removes the perl script that was used to demo the tracer; its functionality is being replaced entirely with timechart. Signed-off-by: Arjan van de Ven Acked-by: Peter Zijlstra Cc: Paul Mackerras Cc: Frederic Weisbecker LKML-Reference: <20090912130542.6d314860@infradead.org> Signed-off-by: Ingo Molnar --- Documentation/trace/power.txt | 17 --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 7 +- arch/x86/kernel/process.c | 28 ++-- include/trace/events/power.h | 81 +++++++++++ kernel/trace/Makefile | 2 +- kernel/trace/power-traces.c | 20 +++ kernel/trace/trace.h | 3 - kernel/trace/trace_entries.h | 17 --- kernel/trace/trace_power.c | 218 ----------------------------- scripts/tracing/power.pl | 108 -------------- 10 files changed, 113 insertions(+), 388 deletions(-) delete mode 100644 Documentation/trace/power.txt create mode 100644 include/trace/events/power.h create mode 100644 kernel/trace/power-traces.c delete mode 100644 kernel/trace/trace_power.c delete mode 100644 scripts/tracing/power.pl (limited to 'Documentation') diff --git a/Documentation/trace/power.txt b/Documentation/trace/power.txt deleted file mode 100644 index cd805e16dc2..00000000000 --- a/Documentation/trace/power.txt +++ /dev/null @@ -1,17 +0,0 @@ -The power tracer collects detailed information about C-state and P-state -transitions, instead of just looking at the high-level "average" -information. - -There is a helper script found in scrips/tracing/power.pl in the kernel -sources which can be used to parse this information and create a -Scalable Vector Graphics (SVG) picture from the trace data. - -To use this tracer: - - echo 0 > /sys/kernel/debug/tracing/tracing_enabled - echo power > /sys/kernel/debug/tracing/current_tracer - echo 1 > /sys/kernel/debug/tracing/tracing_enabled - sleep 1 - echo 0 > /sys/kernel/debug/tracing/tracing_enabled - cat /sys/kernel/debug/tracing/trace | \ - perl scripts/tracing/power.pl > out.sv diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 4109679863c..479cc8c418c 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include @@ -72,8 +72,6 @@ static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data); static DEFINE_PER_CPU(struct aperfmperf, old_perf); -DEFINE_TRACE(power_mark); - /* acpi_perf_data is a pointer to percpu data. */ static struct acpi_processor_performance *acpi_perf_data; @@ -332,7 +330,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, unsigned int next_perf_state = 0; /* Index into perf table */ unsigned int i; int result = 0; - struct power_trace it; dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu); @@ -364,7 +361,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, } } - trace_power_mark(&it, POWER_PSTATE, next_perf_state); + trace_power_frequency(POWER_PSTATE, data->freq_table[next_state].frequency); switch (data->cpu_feature) { case SYSTEM_INTEL_MSR_CAPABLE: diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 071166a4ba8..7b60e390688 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -9,7 +9,7 @@ #include #include #include -#include +#include #include #include #include @@ -25,9 +25,6 @@ EXPORT_SYMBOL(idle_nomwait); struct kmem_cache *task_xstate_cachep; -DEFINE_TRACE(power_start); -DEFINE_TRACE(power_end); - int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) { *dst = *src; @@ -299,9 +296,7 @@ static inline int hlt_use_halt(void) void default_idle(void) { if (hlt_use_halt()) { - struct power_trace it; - - trace_power_start(&it, POWER_CSTATE, 1); + trace_power_start(POWER_CSTATE, 1); current_thread_info()->status &= ~TS_POLLING; /* * TS_POLLING-cleared state must be visible before we @@ -314,7 +309,7 @@ void default_idle(void) else local_irq_enable(); current_thread_info()->status |= TS_POLLING; - trace_power_end(&it); + trace_power_end(0); } else { local_irq_enable(); /* loop is done by the caller */ @@ -372,9 +367,7 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait); */ void mwait_idle_with_hints(unsigned long ax, unsigned long cx) { - struct power_trace it; - - trace_power_start(&it, POWER_CSTATE, (ax>>4)+1); + trace_power_start(POWER_CSTATE, (ax>>4)+1); if (!need_resched()) { if (cpu_has(¤t_cpu_data, X86_FEATURE_CLFLUSH_MONITOR)) clflush((void *)¤t_thread_info()->flags); @@ -384,15 +377,14 @@ void mwait_idle_with_hints(unsigned long ax, unsigned long cx) if (!need_resched()) __mwait(ax, cx); } - trace_power_end(&it); + trace_power_end(0); } /* Default MONITOR/MWAIT with no hints, used for default C1 state */ static void mwait_idle(void) { - struct power_trace it; if (!need_resched()) { - trace_power_start(&it, POWER_CSTATE, 1); + trace_power_start(POWER_CSTATE, 1); if (cpu_has(¤t_cpu_data, X86_FEATURE_CLFLUSH_MONITOR)) clflush((void *)¤t_thread_info()->flags); @@ -402,7 +394,7 @@ static void mwait_idle(void) __sti_mwait(0, 0); else local_irq_enable(); - trace_power_end(&it); + trace_power_end(0); } else local_irq_enable(); } @@ -414,13 +406,11 @@ static void mwait_idle(void) */ static void poll_idle(void) { - struct power_trace it; - - trace_power_start(&it, POWER_CSTATE, 0); + trace_power_start(POWER_CSTATE, 0); local_irq_enable(); while (!need_resched()) cpu_relax(); - trace_power_end(&it); + trace_power_end(0); } /* diff --git a/include/trace/events/power.h b/include/trace/events/power.h new file mode 100644 index 00000000000..ea6d579261a --- /dev/null +++ b/include/trace/events/power.h @@ -0,0 +1,81 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM power + +#if !defined(_TRACE_POWER_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_POWER_H + +#include +#include + +#ifndef _TRACE_POWER_ENUM_ +#define _TRACE_POWER_ENUM_ +enum { + POWER_NONE = 0, + POWER_CSTATE = 1, + POWER_PSTATE = 2, +}; +#endif + + + +TRACE_EVENT(power_start, + + TP_PROTO(unsigned int type, unsigned int state), + + TP_ARGS(type, state), + + TP_STRUCT__entry( + __field( u64, type ) + __field( u64, state ) + ), + + TP_fast_assign( + __entry->type = type; + __entry->state = state; + ), + + TP_printk("type=%lu state=%lu", (unsigned long)__entry->type, (unsigned long)__entry->state) +); + +TRACE_EVENT(power_end, + + TP_PROTO(int dummy), + + TP_ARGS(dummy), + + TP_STRUCT__entry( + __field( u64, dummy ) + ), + + TP_fast_assign( + __entry->dummy = 0xffff; + ), + + TP_printk("dummy=%lu", (unsigned long)__entry->dummy) + +); + + +TRACE_EVENT(power_frequency, + + TP_PROTO(unsigned int type, unsigned int state), + + TP_ARGS(type, state), + + TP_STRUCT__entry( + __field( u64, type ) + __field( u64, state ) + ), + + TP_fast_assign( + __entry->type = type; + __entry->state = state; + ), + + TP_printk("type=%lu state=%lu", (unsigned long)__entry->type, (unsigned long) __entry->state) +); + +#endif /* _TRACE_POWER_H */ + +/* This part must be outside protection */ +#include diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index 844164dca90..26f03ac07c2 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -42,7 +42,6 @@ obj-$(CONFIG_BOOT_TRACER) += trace_boot.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += trace_functions_graph.o obj-$(CONFIG_TRACE_BRANCH_PROFILING) += trace_branch.o obj-$(CONFIG_HW_BRANCH_TRACER) += trace_hw_branches.o -obj-$(CONFIG_POWER_TRACER) += trace_power.o obj-$(CONFIG_KMEMTRACE) += kmemtrace.o obj-$(CONFIG_WORKQUEUE_TRACER) += trace_workqueue.o obj-$(CONFIG_BLK_DEV_IO_TRACE) += blktrace.o @@ -54,5 +53,6 @@ obj-$(CONFIG_EVENT_TRACING) += trace_export.o obj-$(CONFIG_FTRACE_SYSCALLS) += trace_syscalls.o obj-$(CONFIG_EVENT_PROFILE) += trace_event_profile.o obj-$(CONFIG_EVENT_TRACING) += trace_events_filter.o +obj-$(CONFIG_EVENT_TRACING) += power-traces.o libftrace-y := ftrace.o diff --git a/kernel/trace/power-traces.c b/kernel/trace/power-traces.c new file mode 100644 index 00000000000..e06c6e3d56a --- /dev/null +++ b/kernel/trace/power-traces.c @@ -0,0 +1,20 @@ +/* + * Power trace points + * + * Copyright (C) 2009 Arjan van de Ven + */ + +#include +#include +#include +#include +#include +#include + +#define CREATE_TRACE_POINTS +#include + +EXPORT_TRACEPOINT_SYMBOL_GPL(power_start); +EXPORT_TRACEPOINT_SYMBOL_GPL(power_end); +EXPORT_TRACEPOINT_SYMBOL_GPL(power_frequency); + diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 86bcff94791..405cb850b75 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -11,7 +11,6 @@ #include #include #include -#include #include #include @@ -37,7 +36,6 @@ enum trace_type { TRACE_HW_BRANCHES, TRACE_KMEM_ALLOC, TRACE_KMEM_FREE, - TRACE_POWER, TRACE_BLK, __TRACE_LAST_TYPE, @@ -207,7 +205,6 @@ extern void __ftrace_bad_type(void); IF_ASSIGN(var, ent, struct ftrace_graph_ret_entry, \ TRACE_GRAPH_RET); \ IF_ASSIGN(var, ent, struct hw_branch_entry, TRACE_HW_BRANCHES);\ - IF_ASSIGN(var, ent, struct trace_power, TRACE_POWER); \ IF_ASSIGN(var, ent, struct kmemtrace_alloc_entry, \ TRACE_KMEM_ALLOC); \ IF_ASSIGN(var, ent, struct kmemtrace_free_entry, \ diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h index a431748ddd6..ead3d724599 100644 --- a/kernel/trace/trace_entries.h +++ b/kernel/trace/trace_entries.h @@ -330,23 +330,6 @@ FTRACE_ENTRY(hw_branch, hw_branch_entry, F_printk("from: %llx to: %llx", __entry->from, __entry->to) ); -FTRACE_ENTRY(power, trace_power, - - TRACE_POWER, - - F_STRUCT( - __field_struct( struct power_trace, state_data ) - __field_desc( s64, state_data, stamp ) - __field_desc( s64, state_data, end ) - __field_desc( int, state_data, type ) - __field_desc( int, state_data, state ) - ), - - F_printk("%llx->%llx type:%u state:%u", - __entry->stamp, __entry->end, - __entry->type, __entry->state) -); - FTRACE_ENTRY(kmem_alloc, kmemtrace_alloc_entry, TRACE_KMEM_ALLOC, diff --git a/kernel/trace/trace_power.c b/kernel/trace/trace_power.c deleted file mode 100644 index fe1a00f1445..00000000000 --- a/kernel/trace/trace_power.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * ring buffer based C-state tracer - * - * Arjan van de Ven - * Copyright (C) 2008 Intel Corporation - * - * Much is borrowed from trace_boot.c which is - * Copyright (C) 2008 Frederic Weisbecker - * - */ - -#include -#include -#include -#include -#include - -#include "trace.h" -#include "trace_output.h" - -static struct trace_array *power_trace; -static int __read_mostly trace_power_enabled; - -static void probe_power_start(struct power_trace *it, unsigned int type, - unsigned int level) -{ - if (!trace_power_enabled) - return; - - memset(it, 0, sizeof(struct power_trace)); - it->state = level; - it->type = type; - it->stamp = ktime_get(); -} - - -static void probe_power_end(struct power_trace *it) -{ - struct ftrace_event_call *call = &event_power; - struct ring_buffer_event *event; - struct ring_buffer *buffer; - struct trace_power *entry; - struct trace_array_cpu *data; - struct trace_array *tr = power_trace; - - if (!trace_power_enabled) - return; - - buffer = tr->buffer; - - preempt_disable(); - it->end = ktime_get(); - data = tr->data[smp_processor_id()]; - - event = trace_buffer_lock_reserve(buffer, TRACE_POWER, - sizeof(*entry), 0, 0); - if (!event) - goto out; - entry = ring_buffer_event_data(event); - entry->state_data = *it; - if (!filter_check_discard(call, entry, buffer, event)) - trace_buffer_unlock_commit(buffer, event, 0, 0); - out: - preempt_enable(); -} - -static void probe_power_mark(struct power_trace *it, unsigned int type, - unsigned int level) -{ - struct ftrace_event_call *call = &event_power; - struct ring_buffer_event *event; - struct ring_buffer *buffer; - struct trace_power *entry; - struct trace_array_cpu *data; - struct trace_array *tr = power_trace; - - if (!trace_power_enabled) - return; - - buffer = tr->buffer; - - memset(it, 0, sizeof(struct power_trace)); - it->state = level; - it->type = type; - it->stamp = ktime_get(); - preempt_disable(); - it->end = it->stamp; - data = tr->data[smp_processor_id()]; - - event = trace_buffer_lock_reserve(buffer, TRACE_POWER, - sizeof(*entry), 0, 0); - if (!event) - goto out; - entry = ring_buffer_event_data(event); - entry->state_data = *it; - if (!filter_check_discard(call, entry, buffer, event)) - trace_buffer_unlock_commit(buffer, event, 0, 0); - out: - preempt_enable(); -} - -static int tracing_power_register(void) -{ - int ret; - - ret = register_trace_power_start(probe_power_start); - if (ret) { - pr_info("power trace: Couldn't activate tracepoint" - " probe to trace_power_start\n"); - return ret; - } - ret = register_trace_power_end(probe_power_end); - if (ret) { - pr_info("power trace: Couldn't activate tracepoint" - " probe to trace_power_end\n"); - goto fail_start; - } - ret = register_trace_power_mark(probe_power_mark); - if (ret) { - pr_info("power trace: Couldn't activate tracepoint" - " probe to trace_power_mark\n"); - goto fail_end; - } - return ret; -fail_end: - unregister_trace_power_end(probe_power_end); -fail_start: - unregister_trace_power_start(probe_power_start); - return ret; -} - -static void start_power_trace(struct trace_array *tr) -{ - trace_power_enabled = 1; -} - -static void stop_power_trace(struct trace_array *tr) -{ - trace_power_enabled = 0; -} - -static void power_trace_reset(struct trace_array *tr) -{ - trace_power_enabled = 0; - unregister_trace_power_start(probe_power_start); - unregister_trace_power_end(probe_power_end); - unregister_trace_power_mark(probe_power_mark); -} - - -static int power_trace_init(struct trace_array *tr) -{ - power_trace = tr; - - trace_power_enabled = 1; - tracing_power_register(); - - tracing_reset_online_cpus(tr); - return 0; -} - -static enum print_line_t power_print_line(struct trace_iterator *iter) -{ - int ret = 0; - struct trace_entry *entry = iter->ent; - struct trace_power *field ; - struct power_trace *it; - struct trace_seq *s = &iter->seq; - struct timespec stamp; - struct timespec duration; - - trace_assign_type(field, entry); - it = &field->state_data; - stamp = ktime_to_timespec(it->stamp); - duration = ktime_to_timespec(ktime_sub(it->end, it->stamp)); - - if (entry->type == TRACE_POWER) { - if (it->type == POWER_CSTATE) - ret = trace_seq_printf(s, "[%5ld.%09ld] CSTATE: Going to C%i on cpu %i for %ld.%09ld\n", - stamp.tv_sec, - stamp.tv_nsec, - it->state, iter->cpu, - duration.tv_sec, - duration.tv_nsec); - if (it->type == POWER_PSTATE) - ret = trace_seq_printf(s, "[%5ld.%09ld] PSTATE: Going to P%i on cpu %i\n", - stamp.tv_sec, - stamp.tv_nsec, - it->state, iter->cpu); - if (!ret) - return TRACE_TYPE_PARTIAL_LINE; - return TRACE_TYPE_HANDLED; - } - return TRACE_TYPE_UNHANDLED; -} - -static void power_print_header(struct seq_file *s) -{ - seq_puts(s, "# TIMESTAMP STATE EVENT\n"); - seq_puts(s, "# | | |\n"); -} - -static struct tracer power_tracer __read_mostly = -{ - .name = "power", - .init = power_trace_init, - .start = start_power_trace, - .stop = stop_power_trace, - .reset = power_trace_reset, - .print_line = power_print_line, - .print_header = power_print_header, -}; - -static int init_power_trace(void) -{ - return register_tracer(&power_tracer); -} -device_initcall(init_power_trace); diff --git a/scripts/tracing/power.pl b/scripts/tracing/power.pl deleted file mode 100644 index 4f729b3501e..00000000000 --- a/scripts/tracing/power.pl +++ /dev/null @@ -1,108 +0,0 @@ -#!/usr/bin/perl - -# Copyright 2008, Intel Corporation -# -# This file is part of the Linux kernel -# -# This program file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program in a file named COPYING; if not, write to the -# Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, -# Boston, MA 02110-1301 USA -# -# Authors: -# Arjan van de Ven - - -# -# This script turns a cstate ftrace output into a SVG graphic that shows -# historic C-state information -# -# -# cat /sys/kernel/debug/tracing/trace | perl power.pl > out.svg -# - -my @styles; -my $base = 0; - -my @pstate_last; -my @pstate_level; - -$styles[0] = "fill:rgb(0,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[1] = "fill:rgb(0,255,0);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[2] = "fill:rgb(255,0,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[3] = "fill:rgb(255,255,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[4] = "fill:rgb(255,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[5] = "fill:rgb(0,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[6] = "fill:rgb(0,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[7] = "fill:rgb(0,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[8] = "fill:rgb(0,25,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; - - -print " \n"; -print "\n"; - -my $scale = 30000.0; -while (<>) { - my $line = $_; - if ($line =~ /([0-9\.]+)\] CSTATE: Going to C([0-9]) on cpu ([0-9]+) for ([0-9\.]+)/) { - if ($base == 0) { - $base = $1; - } - my $time = $1 - $base; - $time = $time * $scale; - my $C = $2; - my $cpu = $3; - my $y = 400 * $cpu; - my $duration = $4 * $scale; - my $msec = int($4 * 100000)/100.0; - my $height = $C * 20; - $style = $styles[$C]; - - $y = $y + 140 - $height; - - $x2 = $time + 4; - $y2 = $y + 4; - - - print "\n"; - print "C$C $msec\n"; - } - if ($line =~ /([0-9\.]+)\] PSTATE: Going to P([0-9]) on cpu ([0-9]+)/) { - my $time = $1 - $base; - my $state = $2; - my $cpu = $3; - - if (defined($pstate_last[$cpu])) { - my $from = $pstate_last[$cpu]; - my $oldstate = $pstate_state[$cpu]; - my $duration = ($time-$from) * $scale; - - $from = $from * $scale; - my $to = $from + $duration; - my $height = 140 - ($oldstate * (140/8)); - - my $y = 400 * $cpu + 200 + $height; - my $y2 = $y+4; - my $style = $styles[8]; - - print "\n"; - print "P$oldstate (cpu $cpu)\n"; - }; - - $pstate_last[$cpu] = $time; - $pstate_state[$cpu] = $state; - } -} - - -print "\n"; -- cgit v1.2.3-70-g09d2 From 0c02a20ff7695f9c54cc7c013dda326270ccdac8 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 19 Sep 2009 09:37:23 -0700 Subject: intel-iommu: Kill DMAR_BROKEN_GFX_WA option. Just make it depend on BROKEN for now, in case people scream really loud about it (and because we might want to keep some of this logic for an upcoming BIOS workaround, so I don't just want to rip it out entirely just yet). But for graphics devices, it really ought to be unnecessary. Signed-off-by: David Woodhouse --- Documentation/Intel-IOMMU.txt | 6 +----- arch/x86/Kconfig | 2 +- 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/Intel-IOMMU.txt index 21bc416d887..cf9431db873 100644 --- a/Documentation/Intel-IOMMU.txt +++ b/Documentation/Intel-IOMMU.txt @@ -56,11 +56,7 @@ Graphics Problems? ------------------ If you encounter issues with graphics devices, you can try adding option intel_iommu=igfx_off to turn off the integrated graphics engine. - -If it happens to be a PCI device included in the INCLUDE_ALL Engine, -then try enabling CONFIG_DMAR_GFX_WA to setup a 1-1 map. We hear -graphics drivers may be in process of using DMA api's in the near -future and at that time this option can be yanked out. +If this fixes anything, please ensure you file a bug reporting the problem. Some exceptions to IOVA ----------------------- diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 738bdc6b0f8..22a0fd13211 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1916,7 +1916,7 @@ config DMAR_DEFAULT_ON config DMAR_BROKEN_GFX_WA def_bool n prompt "Workaround broken graphics drivers (going away soon)" - depends on DMAR + depends on DMAR && BROKEN ---help--- Current Graphics drivers tend to use physical address for DMA and avoid using DMA APIs. Setting this config -- cgit v1.2.3-70-g09d2 From fc28c39f0ef59bfb649ddfd633275be8e45c0f9c Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 17 Jul 2009 14:39:23 +0200 Subject: mtd: maps: add mtd-ram support to physmap_of MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use physmap_of to access RAMs as mtd and add documenation for it. This approach is a lot less intrusive as adding an of-wrapper around plat-ram.c. As most extensions of plat-ram.c (e.g. custom map-functions) can't be mapped to the device tree anyhow, extending physmap_of seems to be the cleanest approach. Tested with a phyCORE-MPC5121e. Signed-off-by: Wolfram Sang Cc: Vitaly Wool Cc: Artem Bityutskiy Cc: Ken MacLeod Cc: Albrecht Dreß Acked-by: Grant Likely Signed-off-by: David Woodhouse --- Documentation/powerpc/dts-bindings/mtd-physmap.txt | 42 +++++++++++++--------- drivers/mtd/maps/physmap_of.c | 4 +++ 2 files changed, 30 insertions(+), 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt index 667c9bde869..80152cb567d 100644 --- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt +++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt @@ -1,18 +1,19 @@ -CFI or JEDEC memory-mapped NOR flash +CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...) Flash chips (Memory Technology Devices) are often used for solid state file systems on embedded devices. - - compatible : should contain the specific model of flash chip(s) - used, if known, followed by either "cfi-flash" or "jedec-flash" - - reg : Address range(s) of the flash chip(s) + - compatible : should contain the specific model of mtd chip(s) + used, if known, followed by either "cfi-flash", "jedec-flash" + or "mtd-ram". + - reg : Address range(s) of the mtd chip(s) It's possible to (optionally) define multiple "reg" tuples so that - non-identical NOR chips can be described in one flash node. - - bank-width : Width (in bytes) of the flash bank. Equal to the + non-identical chips can be described in one node. + - bank-width : Width (in bytes) of the bank. Equal to the device width times the number of interleaved chips. - - device-width : (optional) Width of a single flash chip. If + - device-width : (optional) Width of a single mtd chip. If omitted, assumed to be equal to 'bank-width'. - - #address-cells, #size-cells : Must be present if the flash has + - #address-cells, #size-cells : Must be present if the device has sub-nodes representing partitions (see below). In this case both #address-cells and #size-cells must be equal to 1. @@ -22,24 +23,24 @@ are defined: - vendor-id : Contains the flash chip's vendor id (1 byte). - device-id : Contains the flash chip's device id (1 byte). -In addition to the information on the flash bank itself, the +In addition to the information on the mtd bank itself, the device tree may optionally contain additional information -describing partitions of the flash address space. This can be +describing partitions of the address space. This can be used on platforms which have strong conventions about which -portions of the flash are used for what purposes, but which don't +portions of a flash are used for what purposes, but which don't use an on-flash partition table such as RedBoot. -Each partition is represented as a sub-node of the flash device. +Each partition is represented as a sub-node of the mtd device. Each node's name represents the name of the corresponding -partition of the flash device. +partition of the mtd device. Flash partitions - - reg : The partition's offset and size within the flash bank. - - label : (optional) The label / name for this flash partition. + - reg : The partition's offset and size within the mtd bank. + - label : (optional) The label / name for this partition. If omitted, the label is taken from the node name (excluding the unit address). - read-only : (optional) This parameter, if present, is a hint to - Linux that this flash partition should only be mounted + Linux that this partition should only be mounted read-only. This is usually used for flash partitions containing early-boot firmware images or data which should not be clobbered. @@ -78,3 +79,12 @@ Here an example with multiple "reg" tuples: reg = <0 0x04000000>; }; }; + +An example using SRAM: + + sram@2,0 { + compatible = "samsung,k6f1616u6a", "mtd-ram"; + reg = <2 0 0x00200000>; + bank-width = <2>; + }; + diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index e828d58910f..61e4eb48bb2 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -361,6 +361,10 @@ static struct of_device_id of_flash_match[] = { .compatible = "jedec-flash", .data = (void *)"jedec_probe", }, + { + .compatible = "mtd-ram", + .data = (void *)"map_ram", + }, { .type = "rom", .compatible = "direct-mapped" -- cgit v1.2.3-70-g09d2 From b519c15d4aacb3706bfff86ba316f9ed81b5032a Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 22 Jun 2009 11:08:36 +0200 Subject: trivial: cleanup hpfall example code (checkpatch) This patch makes hpfall.c conform to kernel coding style. I have not fixed the C99 // comments on two lines as they help indicate that those are not actually comments but incomplete code. Before: total: 10 errors, 6 warnings, 101 lines checked After: total: 2 errors, 0 warnings, 99 lines checked Signed-off-by: Frans Pop Acked-by: Pavel Machek Signed-off-by: Jiri Kosina --- Documentation/hwmon/hpfall.c | 64 +++++++++++++++++++++----------------------- 1 file changed, 31 insertions(+), 33 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c index bbea1ccfd46..d2f6711b468 100644 --- a/Documentation/hwmon/hpfall.c +++ b/Documentation/hwmon/hpfall.c @@ -57,45 +57,43 @@ void ignore_me(void) { protect(0); set_led(0); - } -int main(int argc, char* argv[]) +int main(int argc, char *argv[]) { - int fd, ret; + int fd, ret; - fd = open("/dev/freefall", O_RDONLY); - if (fd < 0) { - perror("open"); - return EXIT_FAILURE; - } + fd = open("/dev/freefall", O_RDONLY); + if (fd < 0) { + perror("open"); + return EXIT_FAILURE; + } signal(SIGALRM, ignore_me); - for (;;) { - unsigned char count; - - ret = read(fd, &count, sizeof(count)); - alarm(0); - if ((ret == -1) && (errno == EINTR)) { - /* Alarm expired, time to unpark the heads */ - continue; - } - - if (ret != sizeof(count)) { - perror("read"); - break; - } - - protect(21); - set_led(1); - if (1 || on_ac() || lid_open()) { - alarm(2); - } else { - alarm(20); - } - } + for (;;) { + unsigned char count; + + ret = read(fd, &count, sizeof(count)); + alarm(0); + if ((ret == -1) && (errno == EINTR)) { + /* Alarm expired, time to unpark the heads */ + continue; + } + + if (ret != sizeof(count)) { + perror("read"); + break; + } + + protect(21); + set_led(1); + if (1 || on_ac() || lid_open()) + alarm(2); + else + alarm(20); + } - close(fd); - return EXIT_SUCCESS; + close(fd); + return EXIT_SUCCESS; } -- cgit v1.2.3-70-g09d2 From b7f5ab6fbbb9459a91c0acae15097a495f800206 Mon Sep 17 00:00:00 2001 From: Horst Schirmeier Date: Fri, 3 Jul 2009 14:20:17 +0200 Subject: trivial: doc: document missing value 2 for randomize-va-space The documentation for /proc/sys/kernel/* does not mention the possible value 2 for randomize-va-space yet. While being there, doing some reformatting, fixing grammar problems and clarifying the correlations between randomize-va-space, kernel parameter "norandmaps" and the CONFIG_COMPAT_BRK option. Signed-off-by: Horst Schirmeier Signed-off-by: Jiri Kosina --- Documentation/sysctl/kernel.txt | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 2dbff53369d..3e5b63ebb82 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -319,25 +319,29 @@ This option can be used to select the type of process address space randomization that is used in the system, for architectures that support this feature. -0 - Turn the process address space randomization off by default. +0 - Turn the process address space randomization off. This is the + default for architectures that do not support this feature anyways, + and kernels that are booted with the "norandmaps" parameter. 1 - Make the addresses of mmap base, stack and VDSO page randomized. This, among other things, implies that shared libraries will be - loaded to random addresses. Also for PIE-linked binaries, the location - of code start is randomized. + loaded to random addresses. Also for PIE-linked binaries, the + location of code start is randomized. This is the default if the + CONFIG_COMPAT_BRK option is enabled. - With heap randomization, the situation is a little bit more - complicated. - There a few legacy applications out there (such as some ancient +2 - Additionally enable heap randomization. This is the default if + CONFIG_COMPAT_BRK is disabled. + + There are a few legacy applications out there (such as some ancient versions of libc.so.5 from 1996) that assume that brk area starts - just after the end of the code+bss. These applications break when - start of the brk area is randomized. There are however no known + just after the end of the code+bss. These applications break when + start of the brk area is randomized. There are however no known non-legacy applications that would be broken this way, so for most - systems it is safe to choose full randomization. However there is - a CONFIG_COMPAT_BRK option for systems with ancient and/or broken - binaries, that makes heap non-randomized, but keeps all other - parts of process address space randomized if randomize_va_space - sysctl is turned on. + systems it is safe to choose full randomization. + + Systems with ancient and/or broken binaries should be configured + with CONFIG_COMPAT_BRK enabled, which excludes the heap from process + address space randomization. ============================================================== -- cgit v1.2.3-70-g09d2 From 411c94038594b2a3fd123d09bdec3fe2500e383d Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Tue, 7 Jul 2009 15:24:23 +0530 Subject: trivial: fix typo "for for" in multiple files trivial: fix typo "for for" in multiple files Signed-off-by: Anand Gadiyar Signed-off-by: Jiri Kosina --- Documentation/filesystems/nfsroot.txt | 2 +- Documentation/powerpc/dts-bindings/marvell.txt | 2 +- arch/blackfin/mach-bf538/include/mach/defBF539.h | 2 +- arch/powerpc/kernel/udbg_16550.c | 2 +- arch/powerpc/platforms/powermac/udbg_scc.c | 2 +- drivers/edac/edac_core.h | 2 +- drivers/infiniband/hw/ipath/ipath_iba6110.c | 2 +- drivers/isdn/i4l/isdn_common.c | 4 ++-- drivers/md/md.h | 2 +- drivers/net/bnx2x_reg.h | 2 +- drivers/net/rionet.c | 2 +- drivers/usb/host/ehci-pci.c | 2 +- drivers/usb/host/ehci.h | 2 +- fs/xfs/xfs_fs.h | 2 +- include/linux/usb.h | 2 +- 15 files changed, 16 insertions(+), 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/nfsroot.txt b/Documentation/filesystems/nfsroot.txt index 68baddf3c3e..3ba0b945aaf 100644 --- a/Documentation/filesystems/nfsroot.txt +++ b/Documentation/filesystems/nfsroot.txt @@ -105,7 +105,7 @@ ip=:::::: the client address and this parameter is NOT empty only replies from the specified server are accepted. - Only required for for NFS root. That is autoconfiguration + Only required for NFS root. That is autoconfiguration will not be triggered if it is missing and NFS root is not in operation. diff --git a/Documentation/powerpc/dts-bindings/marvell.txt b/Documentation/powerpc/dts-bindings/marvell.txt index 3708a2fd474..f1533d91953 100644 --- a/Documentation/powerpc/dts-bindings/marvell.txt +++ b/Documentation/powerpc/dts-bindings/marvell.txt @@ -32,7 +32,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. devices. This field represents the number of cells needed to represent the address of the memory-mapped registers of devices within the system controller chip. - - #size-cells : Size representation for for the memory-mapped + - #size-cells : Size representation for the memory-mapped registers within the system controller chip. - #interrupt-cells : Defines the width of cells used to represent interrupts. diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h index bdc330cd0e1..1c58914a874 100644 --- a/arch/blackfin/mach-bf538/include/mach/defBF539.h +++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h @@ -2325,7 +2325,7 @@ #define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */ #define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ #define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ -#define CDPRIO 0x0100 /* DMA has priority over core for for external accesses */ +#define CDPRIO 0x0100 /* DMA has priority over core for external accesses */ /* EBIU_AMGCTL Bit Positions */ #define AMCKEN_P 0x0000 /* Enable CLKOUT */ diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index acb74a17bbb..b4b167b3364 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -1,5 +1,5 @@ /* - * udbg for for NS16550 compatable serial ports + * udbg for NS16550 compatable serial ports * * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp * diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index 572771fd846..9490157da62 100644 --- a/arch/powerpc/platforms/powermac/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -1,5 +1,5 @@ /* - * udbg for for zilog scc ports as found on Apple PowerMacs + * udbg for zilog scc ports as found on Apple PowerMacs * * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp * diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 871c13b4c14..12f355cafdb 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -286,7 +286,7 @@ enum scrub_type { * is irrespective of the memory devices being mounted * on both sides of the memory stick. * - * Socket set: All of the memory sticks that are required for for + * Socket set: All of the memory sticks that are required for * a single memory access or all of the memory sticks * spanned by a chip-select row. A single socket set * has two chip-select rows and if double-sided sticks diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 02831ad070b..4bd39c8af80 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -809,7 +809,7 @@ static int ipath_setup_ht_reset(struct ipath_devdata *dd) * errors. We only bother to do this at load time, because it's OK if * it happened before we were loaded (first time after boot/reset), * but any time after that, it's fatal anyway. Also need to not check - * for for upper byte errors if we are in 8 bit mode, so figure out + * for upper byte errors if we are in 8 bit mode, so figure out * our width. For now, at least, also complain if it's 8 bit. */ static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev, diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c index 7188c59a76f..adb1e8c36b4 100644 --- a/drivers/isdn/i4l/isdn_common.c +++ b/drivers/isdn/i4l/isdn_common.c @@ -761,7 +761,7 @@ isdn_getnum(char **p) * Be aware that this is not an atomic operation when sleep != 0, even though * interrupts are turned off! Well, like that we are currently only called * on behalf of a read system call on raw device files (which are documented - * to be dangerous and for for debugging purpose only). The inode semaphore + * to be dangerous and for debugging purpose only). The inode semaphore * takes care that this is not called for the same minor device number while * we are sleeping, but access is not serialized against simultaneous read() * from the corresponding ttyI device. Can other ugly events, like changes @@ -873,7 +873,7 @@ isdn_readbchan(int di, int channel, u_char * buf, u_char * fp, int len, wait_que * Be aware that this is not an atomic operation when sleep != 0, even though * interrupts are turned off! Well, like that we are currently only called * on behalf of a read system call on raw device files (which are documented - * to be dangerous and for for debugging purpose only). The inode semaphore + * to be dangerous and for debugging purpose only). The inode semaphore * takes care that this is not called for the same minor device number while * we are sleeping, but access is not serialized against simultaneous read() * from the corresponding ttyI device. Can other ugly events, like changes diff --git a/drivers/md/md.h b/drivers/md/md.h index f8fc188bc76..f55d2ff9513 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -201,7 +201,7 @@ struct mddev_s * INTR: resync needs to be aborted for some reason * DONE: thread is done and is waiting to be reaped * REQUEST: user-space has requested a sync (used with SYNC) - * CHECK: user-space request for for check-only, no repair + * CHECK: user-space request for check-only, no repair * RESHAPE: A reshape is happening * * If neither SYNC or RESHAPE are set, then it is a recovery. diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index 0695be14cf9..aa76cbada5e 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -3122,7 +3122,7 @@ The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] - header pointer. */ #define TCM_REG_XX_TABLE 0x50240 -/* [RW 4] Load value for for cfc ac credit cnt. */ +/* [RW 4] Load value for cfc ac credit cnt. */ #define TM_REG_CFC_AC_CRDCNT_VAL 0x164208 /* [RW 4] Load value for cfc cld credit cnt. */ #define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210 diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index bc98e7f69ee..ede937ee50c 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -72,7 +72,7 @@ static int rionet_check = 0; static int rionet_capable = 1; /* - * This is a fast lookup table for for translating TX + * This is a fast lookup table for translating TX * Ethernet packets into a destination RIO device. It * could be made into a hash table to save memory depending * on system trade-offs. diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index c2f1b7df918..b5b83c43898 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -242,7 +242,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) * System suspend currently expects to be able to suspend the entire * device tree, device-at-a-time. If we failed selective suspend * reports, system suspend would fail; so the root hub code must claim - * success. That's lying to usbcore, and it matters for for runtime + * success. That's lying to usbcore, and it matters for runtime * PM scenarios with selective suspend and remote wakeup... */ if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev)) diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 2bfff30f470..48b9e889a18 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -37,7 +37,7 @@ typedef __u16 __bitwise __hc16; #define __hc16 __le16 #endif -/* statistics can be kept for for tuning/monitoring */ +/* statistics can be kept for tuning/monitoring */ struct ehci_stats { /* irq usage */ unsigned long normal; diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h index c4ea51b55dc..f52ac276277 100644 --- a/fs/xfs/xfs_fs.h +++ b/fs/xfs/xfs_fs.h @@ -117,7 +117,7 @@ struct getbmapx { #define BMV_IF_VALID \ (BMV_IF_ATTRFORK|BMV_IF_NO_DMAPI_READ|BMV_IF_PREALLOC|BMV_IF_DELALLOC) -/* bmv_oflags values - returned for for each non-header segment */ +/* bmv_oflags values - returned for each non-header segment */ #define BMV_OF_PREALLOC 0x1 /* segment = unwritten pre-allocation */ #define BMV_OF_DELALLOC 0x2 /* segment = delayed allocation */ #define BMV_OF_LAST 0x4 /* segment is the last in the file */ diff --git a/include/linux/usb.h b/include/linux/usb.h index a8fe05f224e..19fabc487be 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1071,7 +1071,7 @@ typedef void (*usb_complete_t)(struct urb *); * @start_frame: Returns the initial frame for isochronous transfers. * @number_of_packets: Lists the number of ISO transfer buffers. * @interval: Specifies the polling interval for interrupt or isochronous - * transfers. The units are frames (milliseconds) for for full and low + * transfers. The units are frames (milliseconds) for full and low * speed devices, and microframes (1/8 millisecond) for highspeed ones. * @error_count: Returns the number of ISO transfers that reported errors. * @context: For use in completion functions. This normally points to -- cgit v1.2.3-70-g09d2 From fd589a8f0a13f53a2dd580b1fe170633cf6b095f Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Thu, 16 Jul 2009 17:13:03 +0200 Subject: trivial: fix typo "to to" in multiple files Signed-off-by: Anand Gadiyar Signed-off-by: Jiri Kosina --- Documentation/hwmon/pc87427 | 2 +- Documentation/networking/regulatory.txt | 2 +- Documentation/scsi/scsi_fc_transport.txt | 2 +- arch/ia64/ia32/sys_ia32.c | 2 +- arch/um/include/shared/ptrace_user.h | 2 +- drivers/char/agp/uninorth-agp.c | 2 +- drivers/gpu/drm/mga/mga_state.c | 4 ++-- drivers/lguest/page_tables.c | 2 +- drivers/media/video/gspca/m5602/m5602_core.c | 2 +- drivers/mmc/host/mxcmmc.c | 2 +- drivers/mtd/maps/ixp2000.c | 2 +- drivers/mtd/ubi/eba.c | 2 +- drivers/mtd/ubi/ubi.h | 2 +- drivers/net/bonding/bond_3ad.c | 2 +- drivers/net/e1000/e1000_hw.c | 2 +- drivers/net/wireless/zd1211rw/zd_chip.c | 2 +- drivers/scsi/megaraid/megaraid_sas.c | 2 +- drivers/scsi/qla4xxx/ql4_os.c | 4 ++-- drivers/staging/rt2860/rtmp.h | 2 +- drivers/usb/serial/cypress_m8.h | 2 +- drivers/usb/serial/io_edgeport.c | 2 +- drivers/usb/serial/kl5kusb105.c | 2 +- fs/ext4/inode.c | 2 +- fs/gfs2/rgrp.c | 2 +- fs/ntfs/layout.h | 2 +- include/acpi/actypes.h | 2 +- include/acpi/platform/acgcc.h | 2 +- include/rdma/ib_cm.h | 2 +- kernel/tracepoint.c | 2 +- lib/zlib_deflate/deflate.c | 4 ++-- net/rxrpc/ar-call.c | 2 +- net/sched/sch_hfsc.c | 2 +- 32 files changed, 35 insertions(+), 35 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/pc87427 b/Documentation/hwmon/pc87427 index d1ebbe510f3..db5cc1227a8 100644 --- a/Documentation/hwmon/pc87427 +++ b/Documentation/hwmon/pc87427 @@ -34,5 +34,5 @@ Fan rotation speeds are reported as 14-bit values from a gated clock signal. Speeds down to 83 RPM can be measured. An alarm is triggered if the rotation speed drops below a programmable -limit. Another alarm is triggered if the speed is too low to to be measured +limit. Another alarm is triggered if the speed is too low to be measured (including stalled or missing fan). diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt index eaa1a25946c..ee31369e9e5 100644 --- a/Documentation/networking/regulatory.txt +++ b/Documentation/networking/regulatory.txt @@ -96,7 +96,7 @@ Example code - drivers hinting an alpha2: This example comes from the zd1211rw device driver. You can start by having a mapping of your device's EEPROM country/regulatory -domain value to to a specific alpha2 as follows: +domain value to a specific alpha2 as follows: static struct zd_reg_alpha2_map reg_alpha2_map[] = { { ZD_REGDOMAIN_FCC, "US" }, diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt index d7f181701dc..aec6549ab09 100644 --- a/Documentation/scsi/scsi_fc_transport.txt +++ b/Documentation/scsi/scsi_fc_transport.txt @@ -378,7 +378,7 @@ Vport Disable/Enable: int vport_disable(struct fc_vport *vport, bool disable) where: - vport: Is vport to to be enabled or disabled + vport: Is vport to be enabled or disabled disable: If "true", the vport is to be disabled. If "false", the vport is to be enabled. diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 16ef61a91d9..625ed8f76fc 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -1270,7 +1270,7 @@ putreg (struct task_struct *child, int regno, unsigned int value) case PT_CS: if (value != __USER_CS) printk(KERN_ERR - "ia32.putreg: attempt to to set invalid segment register %d = %x\n", + "ia32.putreg: attempt to set invalid segment register %d = %x\n", regno, value); break; default: diff --git a/arch/um/include/shared/ptrace_user.h b/arch/um/include/shared/ptrace_user.h index 4bce6e01288..7fd8539bc19 100644 --- a/arch/um/include/shared/ptrace_user.h +++ b/arch/um/include/shared/ptrace_user.h @@ -29,7 +29,7 @@ extern int ptrace_setregs(long pid, unsigned long *regs_in); * recompilation. So, we use PTRACE_OLDSETOPTIONS in UML. * We also want to be able to build the kernel on 2.4, which doesn't * have PTRACE_OLDSETOPTIONS. So, if it is missing, we declare - * PTRACE_OLDSETOPTIONS to to be the same as PTRACE_SETOPTIONS. + * PTRACE_OLDSETOPTIONS to be the same as PTRACE_SETOPTIONS. * * On architectures, that start to support PTRACE_O_TRACESYSGOOD on * linux 2.6, PTRACE_OLDSETOPTIONS never is defined, and also isn't diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 20ef1bf5e72..703959eba45 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -270,7 +270,7 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode) if ((uninorth_rev >= 0x30) && (uninorth_rev <= 0x33)) { /* - * We need to to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1, + * We need to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1, * 2.2 and 2.3, Darwin do so. */ if ((command >> AGPSTAT_RQ_DEPTH_SHIFT) > 7) diff --git a/drivers/gpu/drm/mga/mga_state.c b/drivers/gpu/drm/mga/mga_state.c index b710fab21cb..a53b848e0f1 100644 --- a/drivers/gpu/drm/mga/mga_state.c +++ b/drivers/gpu/drm/mga/mga_state.c @@ -239,7 +239,7 @@ static __inline__ void mga_g200_emit_pipe(drm_mga_private_t * dev_priv) MGA_WR34, 0x00000000, MGA_WR42, 0x0000ffff, MGA_WR60, 0x0000ffff); - /* Padding required to to hardware bug. + /* Padding required due to hardware bug. */ DMA_BLOCK(MGA_DMAPAD, 0xffffffff, MGA_DMAPAD, 0xffffffff, @@ -317,7 +317,7 @@ static __inline__ void mga_g400_emit_pipe(drm_mga_private_t * dev_priv) MGA_WR52, MGA_G400_WR_MAGIC, /* tex1 width */ MGA_WR60, MGA_G400_WR_MAGIC); /* tex1 height */ - /* Padding required to to hardware bug */ + /* Padding required due to hardware bug */ DMA_BLOCK(MGA_DMAPAD, 0xffffffff, MGA_DMAPAD, 0xffffffff, MGA_DMAPAD, 0xffffffff, diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c index a8d0aee3bc0..8aaad65c3bb 100644 --- a/drivers/lguest/page_tables.c +++ b/drivers/lguest/page_tables.c @@ -894,7 +894,7 @@ void guest_set_pte(struct lg_cpu *cpu, * tells us they've changed. When the Guest tries to use the new entry it will * fault and demand_page() will fix it up. * - * So with that in mind here's our code to to update a (top-level) PGD entry: + * So with that in mind here's our code to update a (top-level) PGD entry: */ void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx) { diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index 8a5bba16ff3..7f1e5415850 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -56,7 +56,7 @@ int m5602_read_bridge(struct sd *sd, const u8 address, u8 *i2c_data) return (err < 0) ? err : 0; } -/* Writes a byte to to the m5602 */ +/* Writes a byte to the m5602 */ int m5602_write_bridge(struct sd *sd, const u8 address, const u8 i2c_data) { int err; diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index bc14bb1b057..88671529c45 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -512,7 +512,7 @@ static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat) } /* For the DMA case the DMA engine handles the data transfer - * automatically. For non DMA we have to to it ourselves. + * automatically. For non DMA we have to do it ourselves. * Don't do it in interrupt context though. */ if (!mxcmci_use_dma(host) && host->data) diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c index d4fb9a3ab4d..1bdf0ee6d0b 100644 --- a/drivers/mtd/maps/ixp2000.c +++ b/drivers/mtd/maps/ixp2000.c @@ -184,7 +184,7 @@ static int ixp2000_flash_probe(struct platform_device *dev) info->map.bankwidth = 1; /* - * map_priv_2 is used to store a ptr to to the bank_setup routine + * map_priv_2 is used to store a ptr to the bank_setup routine */ info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup; diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index e4d9ef0c965..9f87c99189a 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -1065,7 +1065,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, } /* - * Now we have got to calculate how much data we have to to copy. In + * Now we have got to calculate how much data we have to copy. In * case of a static volume it is fairly easy - the VID header contains * the data size. In case of a dynamic volume it is more difficult - we * have to read the contents, cut 0xFF bytes from the end and copy only diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 6a5fe963378..47877942dec 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -570,7 +570,7 @@ void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol, /* * ubi_rb_for_each_entry - walk an RB-tree. - * @rb: a pointer to type 'struct rb_node' to to use as a loop counter + * @rb: a pointer to type 'struct rb_node' to use as a loop counter * @pos: a pointer to RB-tree entry type to use as a loop counter * @root: RB-tree's root * @member: the name of the 'struct rb_node' within the RB-tree entry diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index cea5cfe23b7..c3fa31c9f2a 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1987,7 +1987,7 @@ void bond_3ad_unbind_slave(struct slave *slave) // find new aggregator for the related port(s) new_aggregator = __get_first_agg(port); for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) { - // if the new aggregator is empty, or it connected to to our port only + // if the new aggregator is empty, or it is connected to our port only if (!new_aggregator->lag_ports || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator)) { break; } diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index cda6b397550..45ac225a7aa 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -3035,7 +3035,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw) /* If TBI compatibility is was previously off, turn it on. For * compatibility with a TBI link partner, we will store bad * packets. Some frames have an additional byte on the end and - * will look like CRC errors to to the hardware. + * will look like CRC errors to the hardware. */ if (!hw->tbi_compatibility_on) { hw->tbi_compatibility_on = true; diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index 5e110a2328a..4e79a980013 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -368,7 +368,7 @@ error: return r; } -/* MAC address: if custom mac addresses are to to be used CR_MAC_ADDR_P1 and +/* MAC address: if custom mac addresses are to be used CR_MAC_ADDR_P1 and * CR_MAC_ADDR_P2 must be overwritten */ int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 7dc3d1894b1..a39addc3a59 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -718,7 +718,7 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp, * megasas_build_ldio - Prepares IOs to logical devices * @instance: Adapter soft state * @scp: SCSI command - * @cmd: Command to to be prepared + * @cmd: Command to be prepared * * Frames (and accompanying SGLs) for regular SCSI IOs use this function. */ diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 40e3cafb3a9..83c8b5e4fc8 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -1422,7 +1422,7 @@ static void qla4xxx_slave_destroy(struct scsi_device *sdev) /** * qla4xxx_del_from_active_array - returns an active srb * @ha: Pointer to host adapter structure. - * @index: index into to the active_array + * @index: index into the active_array * * This routine removes and returns the srb at the specified index **/ @@ -1500,7 +1500,7 @@ static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha) /** * qla4xxx_eh_wait_for_commands - wait for active cmds to finish. - * @ha: pointer to to HBA + * @ha: pointer to HBA * @t: target id * @l: lun id * diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h index 3f498f6f3ff..90fd40f2473 100644 --- a/drivers/staging/rt2860/rtmp.h +++ b/drivers/staging/rt2860/rtmp.h @@ -2060,7 +2060,7 @@ typedef struct _STA_ADMIN_CONFIG { BOOLEAN AdhocBGJoined; // Indicate Adhoc B/G Join. BOOLEAN Adhoc20NJoined; // Indicate Adhoc 20MHz N Join. #endif - // New for WPA, windows want us to to keep association information and + // New for WPA, windows want us to keep association information and // Fixed IEs from last association response NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo; USHORT ReqVarIELen; // Length of next VIE include EID & Length diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index e772b01ac3a..1fd360e0406 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -57,7 +57,7 @@ #define UART_RI 0x10 /* ring indicator - modem - device to host */ #define UART_CD 0x40 /* carrier detect - modem - device to host */ #define CYP_ERROR 0x08 /* received from input report - device to host */ -/* Note - the below has nothing to to with the "feature report" reset */ +/* Note - the below has nothing to do with the "feature report" reset */ #define CONTROL_RESET 0x08 /* sent with output report - host to device */ /* End of RS-232 protocol definitions */ diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index dc0f832657e..b97960ac92f 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2540,7 +2540,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) /***************************************************************************** * send_cmd_write_uart_register - * this function builds up a uart register message and sends to to the device. + * this function builds up a uart register message and sends to the device. *****************************************************************************/ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, __u8 regNum, __u8 regValue) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a61673133d7..f7373371b13 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -38,7 +38,7 @@ * 0.3a - implemented pools of write URBs * 0.3 - alpha version for public testing * 0.2 - TIOCMGET works, so autopilot(1) can be used! - * 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l + * 0.1 - can be used to do pilot-xfer -p /dev/ttyUSB0 -l * * The driver skeleton is mainly based on mct_u232.c and various other * pieces of code shamelessly copied from the drivers/usb/serial/ directory. diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 4abd683b963..3a798737e30 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2337,7 +2337,7 @@ static int __mpage_da_writepage(struct page *page, /* * Rest of the page in the page_vec * redirty then and skip then. We will - * try to to write them again after + * try to write them again after * starting a new transaction */ redirty_page_for_writepage(wbc, page); diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 28c590b7c9d..8f1cfb02a6c 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -179,7 +179,7 @@ static inline u64 gfs2_bit_search(const __le64 *ptr, u64 mask, u8 state) * always aligned to a 64 bit boundary. * * The size of the buffer is in bytes, but is it assumed that it is - * always ok to to read a complete multiple of 64 bits at the end + * always ok to read a complete multiple of 64 bits at the end * of the block in case the end is no aligned to a natural boundary. * * Return: the block number (bitmap buffer scope) that was found diff --git a/fs/ntfs/layout.h b/fs/ntfs/layout.h index 50931b1ce4b..8b2549f672b 100644 --- a/fs/ntfs/layout.h +++ b/fs/ntfs/layout.h @@ -829,7 +829,7 @@ enum { /* Note, FILE_ATTR_VALID_SET_FLAGS masks out the old DOS VolId, the F_A_DEVICE, F_A_DIRECTORY, F_A_SPARSE_FILE, F_A_REPARSE_POINT, F_A_COMPRESSED, and F_A_ENCRYPTED and preserves the rest. This mask - is used to to obtain all flags that are valid for setting. */ + is used to obtain all flags that are valid for setting. */ /* * The flag FILE_ATTR_DUP_FILENAME_INDEX_PRESENT is present in all * FILENAME_ATTR attributes but not in the STANDARD_INFORMATION diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 37ba576d06e..8052236d1a3 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -288,7 +288,7 @@ typedef u32 acpi_physical_address; /* * Some compilers complain about unused variables. Sometimes we don't want to * use all the variables (for example, _acpi_module_name). This allows us - * to to tell the compiler in a per-variable manner that a variable + * to tell the compiler in a per-variable manner that a variable * is unused */ #ifndef ACPI_UNUSED_VAR diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h index 935c5d7fc86..6aadbf84ae7 100644 --- a/include/acpi/platform/acgcc.h +++ b/include/acpi/platform/acgcc.h @@ -57,7 +57,7 @@ /* * Some compilers complain about unused variables. Sometimes we don't want to * use all the variables (for example, _acpi_module_name). This allows us - * to to tell the compiler warning in a per-variable manner that a variable + * to tell the compiler warning in a per-variable manner that a variable * is unused. */ #define ACPI_UNUSED_VAR __attribute__ ((unused)) diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h index 93885830430..c8f94e8db69 100644 --- a/include/rdma/ib_cm.h +++ b/include/rdma/ib_cm.h @@ -482,7 +482,7 @@ int ib_send_cm_rej(struct ib_cm_id *cm_id, * message. * @cm_id: Connection identifier associated with the connection message. * @service_timeout: The lower 5-bits specify the maximum time required for - * the sender to reply to to the connection message. The upper 3-bits + * the sender to reply to the connection message. The upper 3-bits * specify additional control flags. * @private_data: Optional user-defined private data sent with the * message receipt acknowledgement. diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c index 9489a0a9b1b..cc89be5bc0f 100644 --- a/kernel/tracepoint.c +++ b/kernel/tracepoint.c @@ -48,7 +48,7 @@ static struct hlist_head tracepoint_table[TRACEPOINT_TABLE_SIZE]; /* * Note about RCU : - * It is used to to delay the free of multiple probes array until a quiescent + * It is used to delay the free of multiple probes array until a quiescent * state is reached. * Tracepoint entries modifications are protected by the tracepoints_mutex. */ diff --git a/lib/zlib_deflate/deflate.c b/lib/zlib_deflate/deflate.c index c3e4a2baf83..46a31e5f49c 100644 --- a/lib/zlib_deflate/deflate.c +++ b/lib/zlib_deflate/deflate.c @@ -135,7 +135,7 @@ static const config configuration_table[10] = { /* =========================================================================== * Update a hash value with the given input byte - * IN assertion: all calls to to UPDATE_HASH are made with consecutive + * IN assertion: all calls to UPDATE_HASH are made with consecutive * input characters, so that a running hash key can be computed from the * previous key instead of complete recalculation each time. */ @@ -146,7 +146,7 @@ static const config configuration_table[10] = { * Insert string str in the dictionary and set match_head to the previous head * of the hash chain (the most recent string with same hash key). Return * the previous length of the hash chain. - * IN assertion: all calls to to INSERT_STRING are made with consecutive + * IN assertion: all calls to INSERT_STRING are made with consecutive * input characters and the first MIN_MATCH bytes of str are valid * (except for the last MIN_MATCH-1 bytes of the input file). */ diff --git a/net/rxrpc/ar-call.c b/net/rxrpc/ar-call.c index d9231245a79..bc0019f704f 100644 --- a/net/rxrpc/ar-call.c +++ b/net/rxrpc/ar-call.c @@ -96,7 +96,7 @@ static struct rxrpc_call *rxrpc_alloc_call(gfp_t gfp) } /* - * allocate a new client call and attempt to to get a connection slot for it + * allocate a new client call and attempt to get a connection slot for it */ static struct rxrpc_call *rxrpc_alloc_client_call( struct rxrpc_sock *rx, diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 375d64cb1a3..2c5c76be18f 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -77,7 +77,7 @@ * The service curve parameters are converted to the internal * representation. The slope values are scaled to avoid overflow. * the inverse slope values as well as the y-projection of the 1st - * segment are kept in order to to avoid 64-bit divide operations + * segment are kept in order to avoid 64-bit divide operations * that are expensive on 32-bit architectures. */ -- cgit v1.2.3-70-g09d2 From 3c78f5d81ae8131a24577b5551a6d1467b30e0af Mon Sep 17 00:00:00 2001 From: Marton Nemeth Date: Wed, 22 Jul 2009 22:44:23 +0200 Subject: trivial: fix typo in CONFIG_DEBUG_FS in gcov doc The correct name is CONFIG_DEBUG_FS, add the missing underscore. Signed-off-by: Marton Nemeth Signed-off-by: Jiri Kosina --- Documentation/gcov.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt index 40ec6335276..e7ca6478cd9 100644 --- a/Documentation/gcov.txt +++ b/Documentation/gcov.txt @@ -47,7 +47,7 @@ Possible uses: Configure the kernel with: - CONFIG_DEBUGFS=y + CONFIG_DEBUG_FS=y CONFIG_GCOV_KERNEL=y and to get coverage data for the entire kernel: -- cgit v1.2.3-70-g09d2 From 3dbda77e6f3375f87090cfce97b2551d3723521b Mon Sep 17 00:00:00 2001 From: Uwe Kleine-Koenig Date: Thu, 23 Jul 2009 08:31:31 +0200 Subject: trivial: fix typos "man[ae]g?ment" -> "management" Signed-off-by: Uwe Kleine-Koenig Signed-off-by: Jiri Kosina --- Documentation/DocBook/mtdnand.tmpl | 2 +- Documentation/DocBook/scsi.tmpl | 2 +- Documentation/scsi/ChangeLog.megaraid | 2 +- Documentation/sound/alsa/HD-Audio-Models.txt | 2 +- Documentation/trace/ftrace.txt | 2 +- arch/arm/Makefile | 2 +- arch/frv/lib/cache.S | 2 +- arch/mn10300/include/asm/cacheflush.h | 4 ++-- drivers/media/dvb/siano/smscoreapi.c | 2 +- drivers/media/dvb/siano/smscoreapi.h | 4 ++-- drivers/media/radio/radio-mr800.c | 2 +- drivers/message/fusion/mptbase.c | 4 ++-- drivers/net/macb.c | 2 +- drivers/net/wireless/ath/ath5k/reg.h | 2 +- drivers/net/wireless/atmel.c | 2 +- drivers/usb/host/xhci.h | 2 +- drivers/usb/wusbcore/wa-hc.h | 2 +- include/linux/mISDNif.h | 2 +- 18 files changed, 21 insertions(+), 21 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 8e145857fc9..df0d089d0fb 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -568,7 +568,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) The blocks in which the tables are stored are procteted against accidental access by marking them bad in the memory bad block - table. The bad block table managment functions are allowed + table. The bad block table management functions are allowed to circumvernt this protection. diff --git a/Documentation/DocBook/scsi.tmpl b/Documentation/DocBook/scsi.tmpl index 10a150ae2a7..d87f4569e76 100644 --- a/Documentation/DocBook/scsi.tmpl +++ b/Documentation/DocBook/scsi.tmpl @@ -317,7 +317,7 @@ The SAS transport class contains common code to deal with SAS HBAs, an aproximated representation of SAS topologies in the driver model, - and various sysfs attributes to expose these topologies and managment + and various sysfs attributes to expose these topologies and management interfaces to userspace. diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index eaa4801f2ce..38e9e7cadc9 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -514,7 +514,7 @@ iv. Remove yield() while mailbox handshake in synchronous commands v. Remove redundant __megaraid_busywait_mbox routine -vi. Fix bug in the managment module, which causes a system lockup when the +vi. Fix bug in the management module, which causes a system lockup when the IO module is loaded and then unloaded, followed by executing any management utility. The current version of management module does not handle the adapter unregister properly. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 97eebd63bed..f1708b79f96 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -387,7 +387,7 @@ STAC92HD73* STAC92HD83* =========== ref Reference board - mic-ref Reference board with power managment for ports + mic-ref Reference board with power management for ports dell-s14 Dell laptop auto BIOS setup (default) diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index 1b6292bbdd6..957b22fde2d 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -133,7 +133,7 @@ of ftrace. Here is a list of some of the key files: than requested, the rest of the page will be used, making the actual allocation bigger than requested. ( Note, the size may not be a multiple of the page size - due to buffer managment overhead. ) + due to buffer management overhead. ) This can only be updated when the current_tracer is set to "nop". diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7350557a81e..54661125a8b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -25,7 +25,7 @@ KBUILD_CFLAGS +=$(call cc-option,-marm,) # Select a platform tht is kept up-to-date KBUILD_DEFCONFIG := versatile_defconfig -# defines filename extension depending memory manement type. +# defines filename extension depending memory management type. ifeq ($(CONFIG_MMU),) MMUEXT := -nommu endif diff --git a/arch/frv/lib/cache.S b/arch/frv/lib/cache.S index 0e10ad8dc46..0c4fb204911 100644 --- a/arch/frv/lib/cache.S +++ b/arch/frv/lib/cache.S @@ -1,4 +1,4 @@ -/* cache.S: cache managment routines +/* cache.S: cache management routines * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h index 2db746a251f..1a55d61f0d0 100644 --- a/arch/mn10300/include/asm/cacheflush.h +++ b/arch/mn10300/include/asm/cacheflush.h @@ -17,7 +17,7 @@ #include /* - * virtually-indexed cache managment (our cache is physically indexed) + * virtually-indexed cache management (our cache is physically indexed) */ #define flush_cache_all() do {} while (0) #define flush_cache_mm(mm) do {} while (0) @@ -31,7 +31,7 @@ #define flush_dcache_mmap_unlock(mapping) do {} while (0) /* - * physically-indexed cache managment + * physically-indexed cache management */ #ifndef CONFIG_MN10300_CACHE_DISABLED diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c index bd9ab9d0d12..fa6a62369a7 100644 --- a/drivers/media/dvb/siano/smscoreapi.c +++ b/drivers/media/dvb/siano/smscoreapi.c @@ -1367,7 +1367,7 @@ int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level) &msg, sizeof(msg)); } -/* new GPIO managment implementation */ +/* new GPIO management implementation */ static int GetGpioPinParams(u32 PinNum, u32 *pTranslatedPinNum, u32 *pGroupNum, u32 *pGroupCfg) { diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h index f1108c64e89..eec18aaf551 100644 --- a/drivers/media/dvb/siano/smscoreapi.h +++ b/drivers/media/dvb/siano/smscoreapi.h @@ -657,12 +657,12 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev); extern void smscore_putbuffer(struct smscore_device_t *coredev, struct smscore_buffer_t *cb); -/* old GPIO managment */ +/* old GPIO management */ int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin, struct smscore_config_gpio *pinconfig); int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level); -/* new GPIO managment */ +/* new GPIO management */ extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum, struct smscore_gpio_config *pGpioConfig); extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum, diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index 575bf9d8941..a1239083472 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -46,7 +46,7 @@ * Version 0.11: Converted to v4l2_device. * * Many things to do: - * - Correct power managment of device (suspend & resume) + * - Correct power management of device (suspend & resume) * - Add code for scanning and smooth tuning * - Add code for sensitivity value * - Correct mistakes diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 76fa2ee0b57..610e914abe6 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -6821,7 +6821,7 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh *size = y; } /** - * mpt_set_taskmgmt_in_progress_flag - set flags associated with task managment + * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management * @ioc: Pointer to MPT_ADAPTER structure * * Returns 0 for SUCCESS or -1 if FAILED. @@ -6854,7 +6854,7 @@ mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag); /** - * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task managment + * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management * @ioc: Pointer to MPT_ADAPTER structure * **/ diff --git a/drivers/net/macb.c b/drivers/net/macb.c index fb65b427c69..1d0d4d9ab62 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -241,7 +241,7 @@ static int macb_mii_init(struct macb *bp) struct eth_platform_data *pdata; int err = -ENXIO, i; - /* Enable managment port */ + /* Enable management port */ macb_writel(bp, NCR, MACB_BIT(MPE)); bp->mii_bus = mdiobus_alloc(); diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index debad07d990..c63ea6afd96 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -982,7 +982,7 @@ #define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */ /* - * PCI-E Power managment configuration + * PCI-E Power management configuration * and status register [5424+] */ #define AR5K_PCIE_PM_CTL 0x4068 /* Register address */ diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index a3b36b3a9d6..cce188837d1 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -3330,7 +3330,7 @@ static void atmel_smooth_qual(struct atmel_private *priv) priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID; } -/* deals with incoming managment frames. */ +/* deals with incoming management frames. */ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header, u16 frame_len, u8 rssi) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index d31d32206ba..ffe1625d4e1 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1150,7 +1150,7 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci); void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring); void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep); -/* xHCI memory managment */ +/* xHCI memory management */ void xhci_mem_cleanup(struct xhci_hcd *xhci); int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags); void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id); diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h index 586d350cdb4..d6bea3e0b54 100644 --- a/drivers/usb/wusbcore/wa-hc.h +++ b/drivers/usb/wusbcore/wa-hc.h @@ -47,7 +47,7 @@ * to an endpoint on a WUSB device that is connected to a * HWA RC. * - * xfer Transfer managment -- this is all the code that gets a + * xfer Transfer management -- this is all the code that gets a * buffer and pushes it to a device (or viceversa). * * * Some day a lot of this code will be shared between this driver and diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h index 536ca12442c..78c3bed1c3f 100644 --- a/include/linux/mISDNif.h +++ b/include/linux/mISDNif.h @@ -104,7 +104,7 @@ #define DL_UNITDATA_IND 0x3108 #define DL_INFORMATION_IND 0x0008 -/* intern layer 2 managment */ +/* intern layer 2 management */ #define MDL_ASSIGN_REQ 0x1804 #define MDL_ASSIGN_IND 0x1904 #define MDL_REMOVE_REQ 0x1A04 -- cgit v1.2.3-70-g09d2 From 8103b5cc6216d461047514d188248bd14873624a Mon Sep 17 00:00:00 2001 From: Michael Brunner Date: Tue, 4 Aug 2009 00:41:11 +0200 Subject: trivial: SubmittingPatches: Fix reference to renumbered step This patch fixes a reference to step "Select e-mail destination." which has been renumbered from 4) to 5) in linux-2.6.22. Signed-off-by: Michael Brunner Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- Documentation/SubmittingPatches | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 5c555a8b39e..b7f9d3b4bbf 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -183,7 +183,7 @@ the MAN-PAGES maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at least a notification of the change, so that some information makes its way into the manual pages. -Even if the maintainer did not respond in step #4, make sure to ALWAYS +Even if the maintainer did not respond in step #5, make sure to ALWAYS copy the maintainer when you change their code. For small patches you may want to CC the Trivial Patch Monkey -- cgit v1.2.3-70-g09d2 From 2bace8b95108746f6123d312f47f5bda4eb17a26 Mon Sep 17 00:00:00 2001 From: Christian Thaeter Date: Sat, 25 Jul 2009 20:55:15 +0200 Subject: trivial: doc: hpfall: reduce risk that hpfall can do harm Improve the example code to be at least useable, as in not causing harm (as shown below). Code can still be improved further, but this adds some basic safeguards. 1. hpfall *MUST* mlockall(MCL_CURRENT|MCL_FUTURE); itself! Since the Program sits and waits most of the time it becomes very likely swapped out. If it gets woken up when the laptop drops from the table while it is swapped out it actually triggers harddrive activity! 2. Daemonize hpfall using 'daemon(0,0)' (quick and dirty). 3. Give hpfall realtime priority. Should give a chance that it has less latency when woken up. Signed-off-by: Christian Thaeter Signed-off-by: Frans Pop Acked-by: Pavel Machek Signed-off-by: Jiri Kosina --- Documentation/hwmon/hpfall.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c index d2f6711b468..a3cfe1a5f96 100644 --- a/Documentation/hwmon/hpfall.c +++ b/Documentation/hwmon/hpfall.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include void write_int(char *path, int i) { @@ -62,6 +64,7 @@ void ignore_me(void) int main(int argc, char *argv[]) { int fd, ret; + struct sched_param param; fd = open("/dev/freefall", O_RDONLY); if (fd < 0) { @@ -69,6 +72,11 @@ int main(int argc, char *argv[]) return EXIT_FAILURE; } + daemon(0, 0); + param.sched_priority = sched_get_priority_max(SCHED_FIFO); + sched_setscheduler(0, SCHED_FIFO, ¶m); + mlockall(MCL_CURRENT|MCL_FUTURE); + signal(SIGALRM, ignore_me); for (;;) { -- cgit v1.2.3-70-g09d2 From be3990b7efbe8784fe063fb6871a772c0703891a Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Sat, 25 Jul 2009 21:00:12 +0200 Subject: trivial: doc: hpfall: accept disk device to unload as argument Allows users who use an IDE driver for their disk to use hpfall without having to modify the source. By default /dev/sda is used. Suggested by Christian Thaeter in http://lkml.org/lkml/2009/3/25/505. While we're add it, improve error message if opening /dev/freefall fails. Signed-off-by: Frans Pop Cc: Christian Thaeter Acked-by: Pavel Machek Signed-off-by: Jiri Kosina --- Documentation/hwmon/hpfall.c | 45 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 42 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c index a3cfe1a5f96..681ec22b9d0 100644 --- a/Documentation/hwmon/hpfall.c +++ b/Documentation/hwmon/hpfall.c @@ -19,6 +19,32 @@ #include #include +char unload_heads_path[64]; + +int set_unload_heads_path(char *device) +{ + char devname[64]; + + if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0) + return -EINVAL; + strncpy(devname, device + 5, sizeof(devname)); + + snprintf(unload_heads_path, sizeof(unload_heads_path), + "/sys/block/%s/device/unload_heads", devname); + return 0; +} +int valid_disk(void) +{ + int fd = open(unload_heads_path, O_RDONLY); + if (fd < 0) { + perror(unload_heads_path); + return 0; + } + + close(fd); + return 1; +} + void write_int(char *path, int i) { char buf[1024]; @@ -42,7 +68,7 @@ void set_led(int on) void protect(int seconds) { - write_int("/sys/block/sda/device/unload_heads", seconds*1000); + write_int(unload_heads_path, seconds*1000); } int on_ac(void) @@ -61,14 +87,27 @@ void ignore_me(void) set_led(0); } -int main(int argc, char *argv[]) +int main(int argc, char **argv) { int fd, ret; struct sched_param param; + if (argc == 1) + ret = set_unload_heads_path("/dev/sda"); + else if (argc == 2) + ret = set_unload_heads_path(argv[1]); + else + ret = -EINVAL; + + if (ret || !valid_disk()) { + fprintf(stderr, "usage: %s (default: /dev/sda)\n", + argv[0]); + exit(1); + } + fd = open("/dev/freefall", O_RDONLY); if (fd < 0) { - perror("open"); + perror("/dev/freefall"); return EXIT_FAILURE; } -- cgit v1.2.3-70-g09d2 From 6afb1c65d0e67547cef19e2d4c40f7b2d8578bff Mon Sep 17 00:00:00 2001 From: Michal Sojka Date: Thu, 10 Sep 2009 08:02:21 +0200 Subject: trivial: fix typo in tracing documentation Signed-off-by: Michal Sojka Signed-off-by: Jiri Kosina --- Documentation/trace/events.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt index 78c45a87be5..02ac6ed38b2 100644 --- a/Documentation/trace/events.txt +++ b/Documentation/trace/events.txt @@ -72,7 +72,7 @@ To enable all events in sched subsystem: # echo 1 > /sys/kernel/debug/tracing/events/sched/enable -To eanble all events: +To enable all events: # echo 1 > /sys/kernel/debug/tracing/events/enable -- cgit v1.2.3-70-g09d2 From a9ed83a581d01b8330cd1fc867fd8a770342828f Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 17 Sep 2009 14:14:45 -0700 Subject: trivial: typo in kernel-parameters.txt Signed-off-by: Stephen Hemminger Signed-off-by: Jiri Kosina --- Documentation/kernel-parameters.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 0f17d16dc10..c363840cdce 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -933,7 +933,7 @@ and is between 256 and 4096 characters. It is defined in the file 1 -- enable informational integrity auditing messages. ima_hash= [IMA] - Formt: { "sha1" | "md5" } + Format: { "sha1" | "md5" } default: "sha1" ima_tcb [IMA] -- cgit v1.2.3-70-g09d2 From 285a0f00c27a02f1223a198c88de2130e9bab059 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Sun, 20 Sep 2009 17:01:33 -0400 Subject: nfsd: revise 4.1 status documentation Some small updates, a caveat about the minorversion control interface, and an attempt to put missing features in context. Signed-off-by: J. Bruce Fields --- Documentation/filesystems/nfs41-server.txt | 54 ++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'Documentation') diff --git a/Documentation/filesystems/nfs41-server.txt b/Documentation/filesystems/nfs41-server.txt index 05d81cbcb2e..5920fe26e6f 100644 --- a/Documentation/filesystems/nfs41-server.txt +++ b/Documentation/filesystems/nfs41-server.txt @@ -11,6 +11,11 @@ the /proc/fs/nfsd/versions control file. Note that to write this control file, the nfsd service must be taken down. Use your user-mode nfs-utils to set this up; see rpc.nfsd(8) +(Warning: older servers will interpret "+4.1" and "-4.1" as "+4" and +"-4", respectively. Therefore, code meant to work on both new and old +kernels must turn 4.1 on or off *before* turning support for version 4 +on or off; rpc.nfsd does this correctly.) + The NFSv4 minorversion 1 (NFSv4.1) implementation in nfsd is based on the latest NFSv4.1 Internet Draft: http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-29 @@ -25,6 +30,49 @@ are still under development out of tree. See http://wiki.linux-nfs.org/wiki/index.php/PNFS_prototype_design for more information. +The current implementation is intended for developers only: while it +does support ordinary file operations on clients we have tested against +(including the linux client), it is incomplete in ways which may limit +features unexpectedly, cause known bugs in rare cases, or cause +interoperability problems with future clients. Known issues: + + - gss support is questionable: currently mounts with kerberos + from a linux client are possible, but we aren't really + conformant with the spec (for example, we don't use kerberos + on the backchannel correctly). + - no trunking support: no clients currently take advantage of + trunking, but this is a mandatory failure, and its use is + recommended to clients in a number of places. (E.g. to ensure + timely renewal in case an existing connection's retry timeouts + have gotten too long; see section 8.3 of the draft.) + Therefore, lack of this feature may cause future clients to + fail. + - Incomplete backchannel support: incomplete backchannel gss + support and no support for BACKCHANNEL_CTL mean that + callbacks (hence delegations and layouts) may not be + available and clients confused by the incomplete + implementation may fail. + - Server reboot recovery is unsupported; if the server reboots, + clients may fail. + - We do not support SSV, which provides security for shared + client-server state (thus preventing unauthorized tampering + with locks and opens, for example). It is mandatory for + servers to support this, though no clients use it yet. + - Mandatory operations which we do not support, such as + DESTROY_CLIENTID, FREE_STATEID, SECINFO_NO_NAME, and + TEST_STATEID, are not currently used by clients, but will be + (and the spec recommends their uses in common cases), and + clients should not be expected to know how to recover from the + case where they are not supported. This will eventually cause + interoperability failures. + +In addition, some limitations are inherited from the current NFSv4 +implementation: + + - Incomplete delegation enforcement: if a file is renamed or + unlinked, a client holding a delegation may continue to + indefinitely allow opens of the file under the old name. + The table below, taken from the NFSv4.1 document, lists the operations that are mandatory to implement (REQ), optional (OPT), and NFSv4.0 operations that are required not to implement (MNI) @@ -142,6 +190,12 @@ NS*| CB_WANTS_CANCELLED | OPT | FDELG, | Section 20.10 | Implementation notes: +DELEGPURGE: +* mandatory only for servers that support CLAIM_DELEGATE_PREV and/or + CLAIM_DELEG_PREV_FH (which allows clients to keep delegations that + persist across client reboots). Thus we need not implement this for + now. + EXCHANGE_ID: * only SP4_NONE state protection supported * implementation ids are ignored -- cgit v1.2.3-70-g09d2 From 040932cdcfca9b0ac55a4f74f194c2e2c8a2527b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 21 Aug 2009 14:00:57 +0200 Subject: Fix some regulator documentation This fixes a spelling error and an API function signature mismatch in the regulator documentation. Signed-off-by: Linus Walleij Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- Documentation/power/regulator/overview.txt | 2 +- Documentation/power/regulator/regulator.txt | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt index 0cded696ca0..50b8fa85604 100644 --- a/Documentation/power/regulator/overview.txt +++ b/Documentation/power/regulator/overview.txt @@ -29,7 +29,7 @@ Some terms used in this document:- o PMIC - Power Management IC. An IC that contains numerous regulators - and often contains other susbsystems. + and often contains other subsystems. o Consumer - Electronic device that is supplied power by a regulator. diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt index 4200accb9bb..3f8b528f237 100644 --- a/Documentation/power/regulator/regulator.txt +++ b/Documentation/power/regulator/regulator.txt @@ -10,8 +10,9 @@ Registration Drivers can register a regulator by calling :- -struct regulator_dev *regulator_register(struct device *dev, - struct regulator_desc *regulator_desc); +struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, + struct device *dev, struct regulator_init_data *init_data, + void *driver_data); This will register the regulators capabilities and operations to the regulator core. -- cgit v1.2.3-70-g09d2 From 77bb8ff968dddb42a773c7b32d1a6a07f96f3f79 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 6 Sep 2009 21:30:18 +0200 Subject: regulator: update a filename in documentation Signed-off-by: Wolfram Sang Cc: Liam Girdwood Cc: Mark Brown Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- Documentation/power/regulator/overview.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt index 50b8fa85604..ffd185bb605 100644 --- a/Documentation/power/regulator/overview.txt +++ b/Documentation/power/regulator/overview.txt @@ -168,4 +168,4 @@ relevant to non SoC devices and is split into the following four interfaces:- userspace via sysfs. This could be used to help monitor device power consumption and status. - See Documentation/ABI/testing/regulator-sysfs.txt + See Documentation/ABI/testing/sysfs-class-regulator -- cgit v1.2.3-70-g09d2 From 2e7e65ce55566fc81036960b00e5e15f5d9578ea Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 18 Sep 2009 22:44:43 +0200 Subject: regulator: fix typos Fix a couple of typos I found while working with this subsystem. Signed-off-by: Wolfram Sang Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- Documentation/power/regulator/machine.txt | 4 ++-- include/linux/regulator/machine.h | 6 +++--- include/linux/regulator/max1586.h | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt index ce3487d99ab..63728fed620 100644 --- a/Documentation/power/regulator/machine.txt +++ b/Documentation/power/regulator/machine.txt @@ -87,7 +87,7 @@ static struct platform_device regulator_devices[] = { }, }; /* register regulator 1 device */ -platform_device_register(&wm8350_regulator_devices[0]); +platform_device_register(®ulator_devices[0]); /* register regulator 2 device */ -platform_device_register(&wm8350_regulator_devices[1]); +platform_device_register(®ulator_devices[1]); diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 99a4e2eb36a..87f5f176d4e 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -41,7 +41,7 @@ struct regulator; #define REGULATOR_CHANGE_DRMS 0x10 /** - * struct regulator_state - regulator state during low power syatem states + * struct regulator_state - regulator state during low power system states * * This describes a regulators state during a system wide low power state. * @@ -117,10 +117,10 @@ struct regulation_constraints { /* mode to set on startup */ unsigned int initial_mode; - /* constriant flags */ + /* constraint flags */ unsigned always_on:1; /* regulator never off when system is on */ unsigned boot_on:1; /* bootloader/firmware enabled regulator */ - unsigned apply_uV:1; /* apply uV constraint iff min == max */ + unsigned apply_uV:1; /* apply uV constraint if min == max */ }; /** diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h index 44563192bf1..de9a7fae20b 100644 --- a/include/linux/regulator/max1586.h +++ b/include/linux/regulator/max1586.h @@ -36,7 +36,7 @@ * max1586_subdev_data - regulator data * @id: regulator Id (either MAX1586_V3 or MAX1586_V6) * @name: regulator cute name (example for V3: "vcc_core") - * @platform_data: regulator init data (contraints, supplies, ...) + * @platform_data: regulator init data (constraints, supplies, ...) */ struct max1586_subdev_data { int id; @@ -46,7 +46,7 @@ struct max1586_subdev_data { /** * max1586_platform_data - platform data for max1586 - * @num_subdevs: number of regultors used (may be 1 or 2) + * @num_subdevs: number of regulators used (may be 1 or 2) * @subdevs: regulator used * At most, there will be a regulator for V3 and one for V6 voltages. * @v3_gain: gain on the V3 voltage output multiplied by 1e6. -- cgit v1.2.3-70-g09d2 From c574358e8b48adf646f9d5ef70dc76c5d4ad9387 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 21 Sep 2009 17:01:06 -0700 Subject: proc: document `guest' column in /proc/stat We added a new column in cpuX lines of /proc/stat, to show the amount of time spent by a cpu servicing a guest, without updating Documentation/filesystems/proc.txt Signed-off-by: Eric Dumazet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index ffead13f944..1c96cb6c797 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1032,9 +1032,9 @@ Various pieces of information about kernel activity are available in the since the system first booted. For a quick look, simply cat the file: > cat /proc/stat - cpu 2255 34 2290 22625563 6290 127 456 0 - cpu0 1132 34 1441 11311718 3675 127 438 0 - cpu1 1123 0 849 11313845 2614 0 18 0 + cpu 2255 34 2290 22625563 6290 127 456 0 0 + cpu0 1132 34 1441 11311718 3675 127 438 0 0 + cpu1 1123 0 849 11313845 2614 0 18 0 0 intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...] ctxt 1990473 btime 1062191376 @@ -1056,6 +1056,7 @@ second). The meanings of the columns are as follows, from left to right: - irq: servicing interrupts - softirq: servicing softirqs - steal: involuntary wait +- guest: running a guest The "intr" line gives counts of interrupts serviced since boot time, for each of the possible system interrupts. The first column is the total of all -- cgit v1.2.3-70-g09d2 From 41a25e7e67b8be33d7598ff7968b9a8b405b6567 Mon Sep 17 00:00:00 2001 From: Lee Schermerhorn Date: Mon, 21 Sep 2009 17:01:24 -0700 Subject: hugetlb: clean up and update huge pages documentation Attempt to clarify huge page administration and usage, and updates the doucmentation to mention the balancing of huge pages across nodes when allocating and freeing. Signed-off-by: Lee Schermerhorn Cc: Mel Gorman Cc: Nishanth Aravamudan Cc: David Rientjes Cc: Adam Litke Cc: Andy Whitcroft Cc: Eric Whitney Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/vm/hugetlbpage.txt | 133 +++++++++++++++++++++++++-------------- 1 file changed, 87 insertions(+), 46 deletions(-) (limited to 'Documentation') diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index ea8714fcc3a..3a167be78c2 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -18,13 +18,13 @@ First the Linux kernel needs to be built with the CONFIG_HUGETLBFS automatically when CONFIG_HUGETLBFS is selected) configuration options. -The kernel built with hugepage support should show the number of configured -hugepages in the system by running the "cat /proc/meminfo" command. +The kernel built with huge page support should show the number of configured +huge pages in the system by running the "cat /proc/meminfo" command. /proc/meminfo also provides information about the total number of hugetlb pages configured in the kernel. It also displays information about the number of free hugetlb pages at any time. It also displays information about -the configured hugepage size - this is needed for generating the proper +the configured huge page size - this is needed for generating the proper alignment and size of the arguments to the above system calls. The output of "cat /proc/meminfo" will have lines like: @@ -37,25 +37,27 @@ HugePages_Surp: yyy Hugepagesize: zzz kB where: -HugePages_Total is the size of the pool of hugepages. -HugePages_Free is the number of hugepages in the pool that are not yet -allocated. -HugePages_Rsvd is short for "reserved," and is the number of hugepages -for which a commitment to allocate from the pool has been made, but no -allocation has yet been made. It's vaguely analogous to overcommit. -HugePages_Surp is short for "surplus," and is the number of hugepages in -the pool above the value in /proc/sys/vm/nr_hugepages. The maximum -number of surplus hugepages is controlled by -/proc/sys/vm/nr_overcommit_hugepages. +HugePages_Total is the size of the pool of huge pages. +HugePages_Free is the number of huge pages in the pool that are not yet + allocated. +HugePages_Rsvd is short for "reserved," and is the number of huge pages for + which a commitment to allocate from the pool has been made, + but no allocation has yet been made. Reserved huge pages + guarantee that an application will be able to allocate a + huge page from the pool of huge pages at fault time. +HugePages_Surp is short for "surplus," and is the number of huge pages in + the pool above the value in /proc/sys/vm/nr_hugepages. The + maximum number of surplus huge pages is controlled by + /proc/sys/vm/nr_overcommit_hugepages. /proc/filesystems should also show a filesystem of type "hugetlbfs" configured in the kernel. /proc/sys/vm/nr_hugepages indicates the current number of configured hugetlb pages in the kernel. Super user can dynamically request more (or free some -pre-configured) hugepages. +pre-configured) huge pages. The allocation (or deallocation) of hugetlb pages is possible only if there are -enough physically contiguous free pages in system (freeing of hugepages is +enough physically contiguous free pages in system (freeing of huge pages is possible only if there are enough hugetlb pages free that can be transferred back to regular memory pool). @@ -67,43 +69,82 @@ use either the mmap system call or shared memory system calls to start using the huge pages. It is required that the system administrator preallocate enough memory for huge page purposes. -Use the following command to dynamically allocate/deallocate hugepages: +The administrator can preallocate huge pages on the kernel boot command line by +specifying the "hugepages=N" parameter, where 'N' = the number of huge pages +requested. This is the most reliable method for preallocating huge pages as +memory has not yet become fragmented. + +Some platforms support multiple huge page sizes. To preallocate huge pages +of a specific size, one must preceed the huge pages boot command parameters +with a huge page size selection parameter "hugepagesz=". must +be specified in bytes with optional scale suffix [kKmMgG]. The default huge +page size may be selected with the "default_hugepagesz=" boot parameter. + +/proc/sys/vm/nr_hugepages indicates the current number of configured [default +size] hugetlb pages in the kernel. Super user can dynamically request more +(or free some pre-configured) huge pages. + +Use the following command to dynamically allocate/deallocate default sized +huge pages: echo 20 > /proc/sys/vm/nr_hugepages -This command will try to configure 20 hugepages in the system. The success -or failure of allocation depends on the amount of physically contiguous -memory that is preset in system at this time. System administrators may want -to put this command in one of the local rc init files. This will enable the -kernel to request huge pages early in the boot process (when the possibility -of getting physical contiguous pages is still very high). In either -case, administrators will want to verify the number of hugepages actually -allocated by checking the sysctl or meminfo. - -/proc/sys/vm/nr_overcommit_hugepages indicates how large the pool of -hugepages can grow, if more hugepages than /proc/sys/vm/nr_hugepages are -requested by applications. echo'ing any non-zero value into this file -indicates that the hugetlb subsystem is allowed to try to obtain -hugepages from the buddy allocator, if the normal pool is exhausted. As -these surplus hugepages go out of use, they are freed back to the buddy +This command will try to configure 20 default sized huge pages in the system. +On a NUMA platform, the kernel will attempt to distribute the huge page pool +over the all on-line nodes. These huge pages, allocated when nr_hugepages +is increased, are called "persistent huge pages". + +The success or failure of huge page allocation depends on the amount of +physically contiguous memory that is preset in system at the time of the +allocation attempt. If the kernel is unable to allocate huge pages from +some nodes in a NUMA system, it will attempt to make up the difference by +allocating extra pages on other nodes with sufficient available contiguous +memory, if any. + +System administrators may want to put this command in one of the local rc init +files. This will enable the kernel to request huge pages early in the boot +process when the possibility of getting physical contiguous pages is still +very high. Administrators can verify the number of huge pages actually +allocated by checking the sysctl or meminfo. To check the per node +distribution of huge pages in a NUMA system, use: + + cat /sys/devices/system/node/node*/meminfo | fgrep Huge + +/proc/sys/vm/nr_overcommit_hugepages specifies how large the pool of +huge pages can grow, if more huge pages than /proc/sys/vm/nr_hugepages are +requested by applications. Writing any non-zero value into this file +indicates that the hugetlb subsystem is allowed to try to obtain "surplus" +huge pages from the buddy allocator, when the normal pool is exhausted. As +these surplus huge pages go out of use, they are freed back to the buddy allocator. +When increasing the huge page pool size via nr_hugepages, any surplus +pages will first be promoted to persistent huge pages. Then, additional +huge pages will be allocated, if necessary and if possible, to fulfill +the new huge page pool size. + +The administrator may shrink the pool of preallocated huge pages for +the default huge page size by setting the nr_hugepages sysctl to a +smaller value. The kernel will attempt to balance the freeing of huge pages +across all on-line nodes. Any free huge pages on the selected nodes will +be freed back to the buddy allocator. + Caveat: Shrinking the pool via nr_hugepages such that it becomes less -than the number of hugepages in use will convert the balance to surplus +than the number of huge pages in use will convert the balance to surplus huge pages even if it would exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. -With support for multiple hugepage pools at run-time available, much of -the hugepage userspace interface has been duplicated in sysfs. The above -information applies to the default hugepage size (which will be -controlled by the proc interfaces for backwards compatibility). The root -hugepage control directory is +With support for multiple huge page pools at run-time available, much of +the huge page userspace interface has been duplicated in sysfs. The above +information applies to the default huge page size which will be +controlled by the /proc interfaces for backwards compatibility. The root +huge page control directory in sysfs is: /sys/kernel/mm/hugepages -For each hugepage size supported by the running kernel, a subdirectory +For each huge page size supported by the running kernel, a subdirectory will exist, of the form hugepages-${size}kB @@ -116,9 +157,9 @@ Inside each of these directories, the same set of files will exist: resv_hugepages surplus_hugepages -which function as described above for the default hugepage-sized case. +which function as described above for the default huge page-sized case. -If the user applications are going to request hugepages using mmap system +If the user applications are going to request huge pages using mmap system call, then it is required that system administrator mount a file system of type hugetlbfs: @@ -127,7 +168,7 @@ type hugetlbfs: none /mnt/huge This command mounts a (pseudo) filesystem of type hugetlbfs on the directory -/mnt/huge. Any files created on /mnt/huge uses hugepages. The uid and gid +/mnt/huge. Any files created on /mnt/huge uses huge pages. The uid and gid options sets the owner and group of the root of the file system. By default the uid and gid of the current process are taken. The mode option sets the mode of root of file system to value & 0777. This value is given in octal. @@ -156,14 +197,14 @@ mount of filesystem will be required for using mmap calls. ******************************************************************* /* - * Example of using hugepage memory in a user application using Sys V shared + * Example of using huge page memory in a user application using Sys V shared * memory system calls. In this example the app is requesting 256MB of * memory that is backed by huge pages. The application uses the flag * SHM_HUGETLB in the shmget system call to inform the kernel that it is - * requesting hugepages. + * requesting huge pages. * * For the ia64 architecture, the Linux kernel reserves Region number 4 for - * hugepages. That means the addresses starting with 0x800000... will need + * huge pages. That means the addresses starting with 0x800000... will need * to be specified. Specifying a fixed address is not required on ppc64, * i386 or x86_64. * @@ -252,14 +293,14 @@ int main(void) ******************************************************************* /* - * Example of using hugepage memory in a user application using the mmap + * Example of using huge page memory in a user application using the mmap * system call. Before running this application, make sure that the * administrator has mounted the hugetlbfs filesystem (on some directory * like /mnt) using the command mount -t hugetlbfs nodev /mnt. In this * example, the app is requesting memory of size 256MB that is backed by * huge pages. * - * For ia64 architecture, Linux kernel reserves Region number 4 for hugepages. + * For ia64 architecture, Linux kernel reserves Region number 4 for huge pages. * That means the addresses starting with 0x800000... will need to be * specified. Specifying a fixed address is not required on ppc64, i386 * or x86_64. -- cgit v1.2.3-70-g09d2 From 3b2b9a875ddcbf9fcd667db9f961a6a163bd083f Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 21 Sep 2009 17:01:29 -0700 Subject: Documentation/memory.txt: remove some very outdated recommendations Remove some very outdated recommendations in Documentation/memory.txt Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/memory.txt | 31 ++----------------------------- 1 file changed, 2 insertions(+), 29 deletions(-) (limited to 'Documentation') diff --git a/Documentation/memory.txt b/Documentation/memory.txt index 2b3dedd3953..802efe58647 100644 --- a/Documentation/memory.txt +++ b/Documentation/memory.txt @@ -1,18 +1,7 @@ There are several classic problems related to memory on Linux systems. - 1) There are some buggy motherboards which cannot properly - deal with the memory above 16MB. Consider exchanging - your motherboard. - - 2) You cannot do DMA on the ISA bus to addresses above - 16M. Most device drivers under Linux allow the use - of bounce buffers which work around this problem. Drivers - that don't use bounce buffers will be unstable with - more than 16M installed. Drivers that use bounce buffers - will be OK, but may have slightly higher overhead. - - 3) There are some motherboards that will not cache above + 1) There are some motherboards that will not cache above a certain quantity of memory. If you have one of these motherboards, your system will be SLOWER, not faster as you add more memory. Consider exchanging your @@ -24,7 +13,7 @@ It can also tell Linux to use less memory than is actually installed. If you use "mem=" on a machine with PCI, consider using "memmap=" to avoid physical address space collisions. -See the documentation of your boot loader (LILO, loadlin, etc.) about +See the documentation of your boot loader (LILO, grub, loadlin, etc.) about how to pass options to the kernel. There are other memory problems which Linux cannot deal with. Random @@ -42,19 +31,3 @@ Try: with the vendor. Consider testing it with memtest86 yourself. * Exchanging your CPU, cache, or motherboard for one that works. - - * Disabling the cache from the BIOS. - - * Try passing the "mem=4M" option to the kernel to limit - Linux to using a very small amount of memory. Use "memmap="-option - together with "mem=" on systems with PCI to avoid physical address - space collisions. - - -Other tricks: - - * Try passing the "no-387" option to the kernel to ignore - a buggy FPU. - - * Try passing the "no-hlt" option to disable the potentially - buggy HLT instruction in your CPU. -- cgit v1.2.3-70-g09d2 From 55c37a840d9ec0ebed5c944355156d490b1ad5d1 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 21 Sep 2009 17:01:40 -0700 Subject: vm: document that setting vfs_cache_pressure to 0 isn't a good idea Reported-by: Christian Thaeter Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/sysctl/vm.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index c4de6359d44..e6fb1ec2744 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -585,7 +585,9 @@ caching of directory and inode objects. At the default value of vfs_cache_pressure=100 the kernel will attempt to reclaim dentries and inodes at a "fair" rate with respect to pagecache and swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer -to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100 +to retain dentry and inode caches. When vfs_cache_pressure=0, the kernel will +never reclaim dentries and inodes due to memory pressure and this can easily +lead to out-of-memory conditions. Increasing vfs_cache_pressure beyond 100 causes the kernel to prefer to reclaim dentries and inodes. ============================================================== -- cgit v1.2.3-70-g09d2 From 7701c9c0f54feb682d0cefa2ae1f4a1e00e0ba09 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:02:24 -0700 Subject: ksm: add some documentation Add Documentation/vm/ksm.txt: how to use the Kernel Samepage Merging feature Signed-off-by: Hugh Dickins Cc: Michael Kerrisk Cc: Randy Dunlap Acked-by: Izik Eidus Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/vm/00-INDEX | 2 ++ Documentation/vm/ksm.txt | 89 +++++++++++++++++++++++++++++++++++++++++++++++ mm/Kconfig | 1 + 3 files changed, 92 insertions(+) create mode 100644 Documentation/vm/ksm.txt (limited to 'Documentation') diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX index 2f77ced35df..f80a4494487 100644 --- a/Documentation/vm/00-INDEX +++ b/Documentation/vm/00-INDEX @@ -6,6 +6,8 @@ balance - various information on memory balancing. hugetlbpage.txt - a brief summary of hugetlbpage support in the Linux kernel. +ksm.txt + - how to use the Kernel Samepage Merging feature. locking - info on how locking and synchronization is done in the Linux vm code. numa diff --git a/Documentation/vm/ksm.txt b/Documentation/vm/ksm.txt new file mode 100644 index 00000000000..72a22f65960 --- /dev/null +++ b/Documentation/vm/ksm.txt @@ -0,0 +1,89 @@ +How to use the Kernel Samepage Merging feature +---------------------------------------------- + +KSM is a memory-saving de-duplication feature, enabled by CONFIG_KSM=y, +added to the Linux kernel in 2.6.32. See mm/ksm.c for its implementation, +and http://lwn.net/Articles/306704/ and http://lwn.net/Articles/330589/ + +The KSM daemon ksmd periodically scans those areas of user memory which +have been registered with it, looking for pages of identical content which +can be replaced by a single write-protected page (which is automatically +copied if a process later wants to update its content). + +KSM was originally developed for use with KVM (where it was known as +Kernel Shared Memory), to fit more virtual machines into physical memory, +by sharing the data common between them. But it can be useful to any +application which generates many instances of the same data. + +KSM only merges anonymous (private) pages, never pagecache (file) pages. +KSM's merged pages are at present locked into kernel memory for as long +as they are shared: so cannot be swapped out like the user pages they +replace (but swapping KSM pages should follow soon in a later release). + +KSM only operates on those areas of address space which an application +has advised to be likely candidates for merging, by using the madvise(2) +system call: int madvise(addr, length, MADV_MERGEABLE). + +The app may call int madvise(addr, length, MADV_UNMERGEABLE) to cancel +that advice and restore unshared pages: whereupon KSM unmerges whatever +it merged in that range. Note: this unmerging call may suddenly require +more memory than is available - possibly failing with EAGAIN, but more +probably arousing the Out-Of-Memory killer. + +If KSM is not configured into the running kernel, madvise MADV_MERGEABLE +and MADV_UNMERGEABLE simply fail with EINVAL. If the running kernel was +built with CONFIG_KSM=y, those calls will normally succeed: even if the +the KSM daemon is not currently running, MADV_MERGEABLE still registers +the range for whenever the KSM daemon is started; even if the range +cannot contain any pages which KSM could actually merge; even if +MADV_UNMERGEABLE is applied to a range which was never MADV_MERGEABLE. + +Like other madvise calls, they are intended for use on mapped areas of +the user address space: they will report ENOMEM if the specified range +includes unmapped gaps (though working on the intervening mapped areas), +and might fail with EAGAIN if not enough memory for internal structures. + +Applications should be considerate in their use of MADV_MERGEABLE, +restricting its use to areas likely to benefit. KSM's scans may use +a lot of processing power, and its kernel-resident pages are a limited +resource. Some installations will disable KSM for these reasons. + +The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/, +readable by all but writable only by root: + +max_kernel_pages - set to maximum number of kernel pages that KSM may use + e.g. "echo 2000 > /sys/kernel/mm/ksm/max_kernel_pages" + Value 0 imposes no limit on the kernel pages KSM may use; + but note that any process using MADV_MERGEABLE can cause + KSM to allocate these pages, unswappable until it exits. + Default: 2000 (chosen for demonstration purposes) + +pages_to_scan - how many present pages to scan before ksmd goes to sleep + e.g. "echo 200 > /sys/kernel/mm/ksm/pages_to_scan" + Default: 200 (chosen for demonstration purposes) + +sleep_millisecs - how many milliseconds ksmd should sleep before next scan + e.g. "echo 20 > /sys/kernel/mm/ksm/sleep_millisecs" + Default: 20 (chosen for demonstration purposes) + +run - set 0 to stop ksmd from running but keep merged pages, + set 1 to run ksmd e.g. "echo 1 > /sys/kernel/mm/ksm/run", + set 2 to stop ksmd and unmerge all pages currently merged, + but leave mergeable areas registered for next run + Default: 1 (for immediate use by apps which register) + +The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/: + +pages_shared - how many shared unswappable kernel pages KSM is using +pages_sharing - how many more sites are sharing them i.e. how much saved +pages_unshared - how many pages unique but repeatedly checked for merging +pages_volatile - how many pages changing too fast to be placed in a tree +full_scans - how many times all mergeable areas have been scanned + +A high ratio of pages_sharing to pages_shared indicates good sharing, but +a high ratio of pages_unshared to pages_sharing indicates wasted effort. +pages_volatile embraces several different kinds of activity, but a high +proportion there would also indicate poor use of madvise MADV_MERGEABLE. + +Izik Eidus, +Hugh Dickins, 30 July 2009 diff --git a/mm/Kconfig b/mm/Kconfig index c0b6afa178a..71eb0b4cce8 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -224,6 +224,7 @@ config KSM the many instances by a single resident page with that content, so saving memory until one or another app needs to modify the content. Recommended for use with KVM, or with other duplicative applications. + See Documentation/vm/ksm.txt for more information. config DEFAULT_MMAP_MIN_ADDR int "Low address space to protect from user allocation" -- cgit v1.2.3-70-g09d2 From 398499d5f3613c47f2143b8c54a04efb5d7a6da9 Mon Sep 17 00:00:00 2001 From: "Moussa A. Ba" Date: Mon, 21 Sep 2009 17:02:29 -0700 Subject: pagemap clear_refs: modify to specify anon or mapped vma clearing The patch makes the clear_refs more versatile in adding the option to select anonymous pages or file backed pages for clearing. This addition has a measurable impact on user space application performance as it decreases the number of pagewalks in scenarios where one is only interested in a specific type of page (anonymous or file mapped). The patch adds anonymous and file backed filters to the clear_refs interface. echo 1 > /proc/PID/clear_refs resets the bits on all pages echo 2 > /proc/PID/clear_refs resets the bits on anonymous pages only echo 3 > /proc/PID/clear_refs resets the bits on file backed pages only Any other value is ignored Signed-off-by: Moussa A. Ba Signed-off-by: Jared E. Hulbert Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 13 +++++++++++++ fs/proc/task_mmu.c | 28 ++++++++++++++++++++++++---- 2 files changed, 37 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 1c96cb6c797..ae7f8bb1b7b 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -375,6 +375,19 @@ of memory currently marked as referenced or accessed. This file is only present if the CONFIG_MMU kernel configuration option is enabled. +The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG +bits on both physical and virtual pages associated with a process. +To clear the bits for all the pages associated with the process + > echo 1 > /proc/PID/clear_refs + +To clear the bits for the anonymous pages associated with the process + > echo 2 > /proc/PID/clear_refs + +To clear the bits for the file mapped pages associated with the process + > echo 3 > /proc/PID/clear_refs +Any other value written to /proc/PID/clear_refs will have no effect. + + 1.2 Kernel data --------------- diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 9bd8be1d235..59e98fea34a 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -465,6 +465,10 @@ static int clear_refs_pte_range(pmd_t *pmd, unsigned long addr, return 0; } +#define CLEAR_REFS_ALL 1 +#define CLEAR_REFS_ANON 2 +#define CLEAR_REFS_MAPPED 3 + static ssize_t clear_refs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { @@ -472,13 +476,15 @@ static ssize_t clear_refs_write(struct file *file, const char __user *buf, char buffer[PROC_NUMBUF], *end; struct mm_struct *mm; struct vm_area_struct *vma; + int type; memset(buffer, 0, sizeof(buffer)); if (count > sizeof(buffer) - 1) count = sizeof(buffer) - 1; if (copy_from_user(buffer, buf, count)) return -EFAULT; - if (!simple_strtol(buffer, &end, 0)) + type = simple_strtol(buffer, &end, 0); + if (type < CLEAR_REFS_ALL || type > CLEAR_REFS_MAPPED) return -EINVAL; if (*end == '\n') end++; @@ -494,9 +500,23 @@ static ssize_t clear_refs_write(struct file *file, const char __user *buf, down_read(&mm->mmap_sem); for (vma = mm->mmap; vma; vma = vma->vm_next) { clear_refs_walk.private = vma; - if (!is_vm_hugetlb_page(vma)) - walk_page_range(vma->vm_start, vma->vm_end, - &clear_refs_walk); + if (is_vm_hugetlb_page(vma)) + continue; + /* + * Writing 1 to /proc/pid/clear_refs affects all pages. + * + * Writing 2 to /proc/pid/clear_refs only affects + * Anonymous pages. + * + * Writing 3 to /proc/pid/clear_refs only affects file + * mapped pages. + */ + if (type == CLEAR_REFS_ANON && vma->vm_file) + continue; + if (type == CLEAR_REFS_MAPPED && !vma->vm_file) + continue; + walk_page_range(vma->vm_start, vma->vm_end, + &clear_refs_walk); } flush_tlb_mm(mm); up_read(&mm->mmap_sem); -- cgit v1.2.3-70-g09d2 From c9d05cfc001fef3d6d37651e19ab9227a32b71f5 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 21 Sep 2009 17:02:47 -0700 Subject: tracing, page-allocator: add a postprocessing script for page-allocator-related ftrace events This patch adds a simple post-processing script for the page-allocator-related trace events. It can be used to give an indication of who the most allocator-intensive processes are and how often the zone lock was taken during the tracing period. Example output looks like Process Pages Pages Pages Pages PCPU PCPU PCPU Fragment Fragment MigType Fragment Fragment Unknown details allocd allocd freed freed pages drains refills Fallback Causing Changed Severe Moderate under lock direct pagevec drain swapper-0 0 0 2 0 0 0 0 0 0 0 0 0 0 Xorg-3770 10603 5952 3685 6978 5996 194 192 0 0 0 0 0 0 modprobe-21397 51 0 0 86 31 1 0 0 0 0 0 0 0 xchat-5370 228 93 0 0 0 0 3 0 0 0 0 0 0 awesome-4317 32 32 0 0 0 0 32 0 0 0 0 0 0 thinkfan-3863 2 0 1 1 0 0 0 0 0 0 0 0 0 hald-addon-stor-3935 2 0 0 0 0 0 0 0 0 0 0 0 0 akregator-4506 1 1 0 0 0 0 1 0 0 0 0 0 0 xmms-14888 0 0 1 0 0 0 0 0 0 0 0 0 0 khelper-12 1 0 0 0 0 0 0 0 0 0 0 0 0 Optionally, the output can include information on the parent or aggregate based on process name instead of aggregating based on each pid. Example output including parent information and stripped out the PID looks something like; Process Pages Pages Pages Pages PCPU PCPU PCPU Fragment Fragment MigType Fragment Fragment Unknown details allocd allocd freed freed pages drains refills Fallback Causing Changed Severe Moderate under lock direct pagevec drain gdm-3756 :: Xorg-3770 3796 2976 99 3813 3224 104 98 0 0 0 0 0 0 init-1 :: hald-3892 1 0 0 0 0 0 0 0 0 0 0 0 0 git-21447 :: editor-21448 4 0 4 0 0 0 0 0 0 0 0 0 0 This says that Xorg allocated 3796 pages and it's parent process is gdm with a PID of 3756; The postprocessor parses the text output of tracing. While there is a binary format, the expectation is that the binary output can be readily translated into text and post-processed offline. Obviously if the text format changes, the parser will break but the regular expression parser is fairly rudimentary so should be readily adjustable. Signed-off-by: Mel Gorman Cc: Rik van Riel Reviewed-by: Ingo Molnar Cc: Larry Woodman Cc: Peter Zijlstra Cc: Li Ming Chun Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .../postprocess/trace-pagealloc-postprocess.pl | 418 +++++++++++++++++++++ 1 file changed, 418 insertions(+) create mode 100644 Documentation/trace/postprocess/trace-pagealloc-postprocess.pl (limited to 'Documentation') diff --git a/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl b/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl new file mode 100644 index 00000000000..7df50e8cf4d --- /dev/null +++ b/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl @@ -0,0 +1,418 @@ +#!/usr/bin/perl +# This is a POC (proof of concept or piece of crap, take your pick) for reading the +# text representation of trace output related to page allocation. It makes an attempt +# to extract some high-level information on what is going on. The accuracy of the parser +# may vary considerably +# +# Example usage: trace-pagealloc-postprocess.pl < /sys/kernel/debug/tracing/trace_pipe +# other options +# --prepend-parent Report on the parent proc and PID +# --read-procstat If the trace lacks process info, get it from /proc +# --ignore-pid Aggregate processes of the same name together +# +# Copyright (c) IBM Corporation 2009 +# Author: Mel Gorman +use strict; +use Getopt::Long; + +# Tracepoint events +use constant MM_PAGE_ALLOC => 1; +use constant MM_PAGE_FREE_DIRECT => 2; +use constant MM_PAGEVEC_FREE => 3; +use constant MM_PAGE_PCPU_DRAIN => 4; +use constant MM_PAGE_ALLOC_ZONE_LOCKED => 5; +use constant MM_PAGE_ALLOC_EXTFRAG => 6; +use constant EVENT_UNKNOWN => 7; + +# Constants used to track state +use constant STATE_PCPU_PAGES_DRAINED => 8; +use constant STATE_PCPU_PAGES_REFILLED => 9; + +# High-level events extrapolated from tracepoints +use constant HIGH_PCPU_DRAINS => 10; +use constant HIGH_PCPU_REFILLS => 11; +use constant HIGH_EXT_FRAGMENT => 12; +use constant HIGH_EXT_FRAGMENT_SEVERE => 13; +use constant HIGH_EXT_FRAGMENT_MODERATE => 14; +use constant HIGH_EXT_FRAGMENT_CHANGED => 15; + +my %perprocesspid; +my %perprocess; +my $opt_ignorepid; +my $opt_read_procstat; +my $opt_prepend_parent; + +# Catch sigint and exit on request +my $sigint_report = 0; +my $sigint_exit = 0; +my $sigint_pending = 0; +my $sigint_received = 0; +sub sigint_handler { + my $current_time = time; + if ($current_time - 2 > $sigint_received) { + print "SIGINT received, report pending. Hit ctrl-c again to exit\n"; + $sigint_report = 1; + } else { + if (!$sigint_exit) { + print "Second SIGINT received quickly, exiting\n"; + } + $sigint_exit++; + } + + if ($sigint_exit > 3) { + print "Many SIGINTs received, exiting now without report\n"; + exit; + } + + $sigint_received = $current_time; + $sigint_pending = 1; +} +$SIG{INT} = "sigint_handler"; + +# Parse command line options +GetOptions( + 'ignore-pid' => \$opt_ignorepid, + 'read-procstat' => \$opt_read_procstat, + 'prepend-parent' => \$opt_prepend_parent, +); + +# Defaults for dynamically discovered regex's +my $regex_fragdetails_default = 'page=([0-9a-f]*) pfn=([0-9]*) alloc_order=([-0-9]*) fallback_order=([-0-9]*) pageblock_order=([-0-9]*) alloc_migratetype=([-0-9]*) fallback_migratetype=([-0-9]*) fragmenting=([-0-9]) change_ownership=([-0-9])'; + +# Dyanically discovered regex +my $regex_fragdetails; + +# Static regex used. Specified like this for readability and for use with /o +# (process_pid) (cpus ) ( time ) (tpoint ) (details) +my $regex_traceevent = '\s*([a-zA-Z0-9-]*)\s*(\[[0-9]*\])\s*([0-9.]*):\s*([a-zA-Z_]*):\s*(.*)'; +my $regex_statname = '[-0-9]*\s\((.*)\).*'; +my $regex_statppid = '[-0-9]*\s\(.*\)\s[A-Za-z]\s([0-9]*).*'; + +sub generate_traceevent_regex { + my $event = shift; + my $default = shift; + my $regex; + + # Read the event format or use the default + if (!open (FORMAT, "/sys/kernel/debug/tracing/events/$event/format")) { + $regex = $default; + } else { + my $line; + while (!eof(FORMAT)) { + $line = ; + if ($line =~ /^print fmt:\s"(.*)",.*/) { + $regex = $1; + $regex =~ s/%p/\([0-9a-f]*\)/g; + $regex =~ s/%d/\([-0-9]*\)/g; + $regex =~ s/%lu/\([0-9]*\)/g; + } + } + } + + # Verify fields are in the right order + my $tuple; + foreach $tuple (split /\s/, $regex) { + my ($key, $value) = split(/=/, $tuple); + my $expected = shift; + if ($key ne $expected) { + print("WARNING: Format not as expected '$key' != '$expected'"); + $regex =~ s/$key=\((.*)\)/$key=$1/; + } + } + + if (defined shift) { + die("Fewer fields than expected in format"); + } + + return $regex; +} +$regex_fragdetails = generate_traceevent_regex("kmem/mm_page_alloc_extfrag", + $regex_fragdetails_default, + "page", "pfn", + "alloc_order", "fallback_order", "pageblock_order", + "alloc_migratetype", "fallback_migratetype", + "fragmenting", "change_ownership"); + +sub read_statline($) { + my $pid = $_[0]; + my $statline; + + if (open(STAT, "/proc/$pid/stat")) { + $statline = ; + close(STAT); + } + + if ($statline eq '') { + $statline = "-1 (UNKNOWN_PROCESS_NAME) R 0"; + } + + return $statline; +} + +sub guess_process_pid($$) { + my $pid = $_[0]; + my $statline = $_[1]; + + if ($pid == 0) { + return "swapper-0"; + } + + if ($statline !~ /$regex_statname/o) { + die("Failed to math stat line for process name :: $statline"); + } + return "$1-$pid"; +} + +sub parent_info($$) { + my $pid = $_[0]; + my $statline = $_[1]; + my $ppid; + + if ($pid == 0) { + return "NOPARENT-0"; + } + + if ($statline !~ /$regex_statppid/o) { + die("Failed to match stat line process ppid:: $statline"); + } + + # Read the ppid stat line + $ppid = $1; + return guess_process_pid($ppid, read_statline($ppid)); +} + +sub process_events { + my $traceevent; + my $process_pid; + my $cpus; + my $timestamp; + my $tracepoint; + my $details; + my $statline; + + # Read each line of the event log +EVENT_PROCESS: + while ($traceevent = ) { + if ($traceevent =~ /$regex_traceevent/o) { + $process_pid = $1; + $tracepoint = $4; + + if ($opt_read_procstat || $opt_prepend_parent) { + $process_pid =~ /(.*)-([0-9]*)$/; + my $process = $1; + my $pid = $2; + + $statline = read_statline($pid); + + if ($opt_read_procstat && $process eq '') { + $process_pid = guess_process_pid($pid, $statline); + } + + if ($opt_prepend_parent) { + $process_pid = parent_info($pid, $statline) . " :: $process_pid"; + } + } + + # Unnecessary in this script. Uncomment if required + # $cpus = $2; + # $timestamp = $3; + } else { + next; + } + + # Perl Switch() sucks majorly + if ($tracepoint eq "mm_page_alloc") { + $perprocesspid{$process_pid}->{MM_PAGE_ALLOC}++; + } elsif ($tracepoint eq "mm_page_free_direct") { + $perprocesspid{$process_pid}->{MM_PAGE_FREE_DIRECT}++; + } elsif ($tracepoint eq "mm_pagevec_free") { + $perprocesspid{$process_pid}->{MM_PAGEVEC_FREE}++; + } elsif ($tracepoint eq "mm_page_pcpu_drain") { + $perprocesspid{$process_pid}->{MM_PAGE_PCPU_DRAIN}++; + $perprocesspid{$process_pid}->{STATE_PCPU_PAGES_DRAINED}++; + } elsif ($tracepoint eq "mm_page_alloc_zone_locked") { + $perprocesspid{$process_pid}->{MM_PAGE_ALLOC_ZONE_LOCKED}++; + $perprocesspid{$process_pid}->{STATE_PCPU_PAGES_REFILLED}++; + } elsif ($tracepoint eq "mm_page_alloc_extfrag") { + + # Extract the details of the event now + $details = $5; + + my ($page, $pfn); + my ($alloc_order, $fallback_order, $pageblock_order); + my ($alloc_migratetype, $fallback_migratetype); + my ($fragmenting, $change_ownership); + + if ($details !~ /$regex_fragdetails/o) { + print "WARNING: Failed to parse mm_page_alloc_extfrag as expected\n"; + next; + } + + $perprocesspid{$process_pid}->{MM_PAGE_ALLOC_EXTFRAG}++; + $page = $1; + $pfn = $2; + $alloc_order = $3; + $fallback_order = $4; + $pageblock_order = $5; + $alloc_migratetype = $6; + $fallback_migratetype = $7; + $fragmenting = $8; + $change_ownership = $9; + + if ($fragmenting) { + $perprocesspid{$process_pid}->{HIGH_EXT_FRAG}++; + if ($fallback_order <= 3) { + $perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_SEVERE}++; + } else { + $perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_MODERATE}++; + } + } + if ($change_ownership) { + $perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_CHANGED}++; + } + } else { + $perprocesspid{$process_pid}->{EVENT_UNKNOWN}++; + } + + # Catch a full pcpu drain event + if ($perprocesspid{$process_pid}->{STATE_PCPU_PAGES_DRAINED} && + $tracepoint ne "mm_page_pcpu_drain") { + + $perprocesspid{$process_pid}->{HIGH_PCPU_DRAINS}++; + $perprocesspid{$process_pid}->{STATE_PCPU_PAGES_DRAINED} = 0; + } + + # Catch a full pcpu refill event + if ($perprocesspid{$process_pid}->{STATE_PCPU_PAGES_REFILLED} && + $tracepoint ne "mm_page_alloc_zone_locked") { + $perprocesspid{$process_pid}->{HIGH_PCPU_REFILLS}++; + $perprocesspid{$process_pid}->{STATE_PCPU_PAGES_REFILLED} = 0; + } + + if ($sigint_pending) { + last EVENT_PROCESS; + } + } +} + +sub dump_stats { + my $hashref = shift; + my %stats = %$hashref; + + # Dump per-process stats + my $process_pid; + my $max_strlen = 0; + + # Get the maximum process name + foreach $process_pid (keys %perprocesspid) { + my $len = length($process_pid); + if ($len > $max_strlen) { + $max_strlen = $len; + } + } + $max_strlen += 2; + + printf("\n"); + printf("%-" . $max_strlen . "s %8s %10s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s\n", + "Process", "Pages", "Pages", "Pages", "Pages", "PCPU", "PCPU", "PCPU", "Fragment", "Fragment", "MigType", "Fragment", "Fragment", "Unknown"); + printf("%-" . $max_strlen . "s %8s %10s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s\n", + "details", "allocd", "allocd", "freed", "freed", "pages", "drains", "refills", "Fallback", "Causing", "Changed", "Severe", "Moderate", ""); + + printf("%-" . $max_strlen . "s %8s %10s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s %8s\n", + "", "", "under lock", "direct", "pagevec", "drain", "", "", "", "", "", "", "", ""); + + foreach $process_pid (keys %stats) { + # Dump final aggregates + if ($stats{$process_pid}->{STATE_PCPU_PAGES_DRAINED}) { + $stats{$process_pid}->{HIGH_PCPU_DRAINS}++; + $stats{$process_pid}->{STATE_PCPU_PAGES_DRAINED} = 0; + } + if ($stats{$process_pid}->{STATE_PCPU_PAGES_REFILLED}) { + $stats{$process_pid}->{HIGH_PCPU_REFILLS}++; + $stats{$process_pid}->{STATE_PCPU_PAGES_REFILLED} = 0; + } + + printf("%-" . $max_strlen . "s %8d %10d %8d %8d %8d %8d %8d %8d %8d %8d %8d %8d %8d\n", + $process_pid, + $stats{$process_pid}->{MM_PAGE_ALLOC}, + $stats{$process_pid}->{MM_PAGE_ALLOC_ZONE_LOCKED}, + $stats{$process_pid}->{MM_PAGE_FREE_DIRECT}, + $stats{$process_pid}->{MM_PAGEVEC_FREE}, + $stats{$process_pid}->{MM_PAGE_PCPU_DRAIN}, + $stats{$process_pid}->{HIGH_PCPU_DRAINS}, + $stats{$process_pid}->{HIGH_PCPU_REFILLS}, + $stats{$process_pid}->{MM_PAGE_ALLOC_EXTFRAG}, + $stats{$process_pid}->{HIGH_EXT_FRAG}, + $stats{$process_pid}->{HIGH_EXT_FRAGMENT_CHANGED}, + $stats{$process_pid}->{HIGH_EXT_FRAGMENT_SEVERE}, + $stats{$process_pid}->{HIGH_EXT_FRAGMENT_MODERATE}, + $stats{$process_pid}->{EVENT_UNKNOWN}); + } +} + +sub aggregate_perprocesspid() { + my $process_pid; + my $process; + undef %perprocess; + + foreach $process_pid (keys %perprocesspid) { + $process = $process_pid; + $process =~ s/-([0-9])*$//; + if ($process eq '') { + $process = "NO_PROCESS_NAME"; + } + + $perprocess{$process}->{MM_PAGE_ALLOC} += $perprocesspid{$process_pid}->{MM_PAGE_ALLOC}; + $perprocess{$process}->{MM_PAGE_ALLOC_ZONE_LOCKED} += $perprocesspid{$process_pid}->{MM_PAGE_ALLOC_ZONE_LOCKED}; + $perprocess{$process}->{MM_PAGE_FREE_DIRECT} += $perprocesspid{$process_pid}->{MM_PAGE_FREE_DIRECT}; + $perprocess{$process}->{MM_PAGEVEC_FREE} += $perprocesspid{$process_pid}->{MM_PAGEVEC_FREE}; + $perprocess{$process}->{MM_PAGE_PCPU_DRAIN} += $perprocesspid{$process_pid}->{MM_PAGE_PCPU_DRAIN}; + $perprocess{$process}->{HIGH_PCPU_DRAINS} += $perprocesspid{$process_pid}->{HIGH_PCPU_DRAINS}; + $perprocess{$process}->{HIGH_PCPU_REFILLS} += $perprocesspid{$process_pid}->{HIGH_PCPU_REFILLS}; + $perprocess{$process}->{MM_PAGE_ALLOC_EXTFRAG} += $perprocesspid{$process_pid}->{MM_PAGE_ALLOC_EXTFRAG}; + $perprocess{$process}->{HIGH_EXT_FRAG} += $perprocesspid{$process_pid}->{HIGH_EXT_FRAG}; + $perprocess{$process}->{HIGH_EXT_FRAGMENT_CHANGED} += $perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_CHANGED}; + $perprocess{$process}->{HIGH_EXT_FRAGMENT_SEVERE} += $perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_SEVERE}; + $perprocess{$process}->{HIGH_EXT_FRAGMENT_MODERATE} += $perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_MODERATE}; + $perprocess{$process}->{EVENT_UNKNOWN} += $perprocesspid{$process_pid}->{EVENT_UNKNOWN}; + } +} + +sub report() { + if (!$opt_ignorepid) { + dump_stats(\%perprocesspid); + } else { + aggregate_perprocesspid(); + dump_stats(\%perprocess); + } +} + +# Process events or signals until neither is available +sub signal_loop() { + my $sigint_processed; + do { + $sigint_processed = 0; + process_events(); + + # Handle pending signals if any + if ($sigint_pending) { + my $current_time = time; + + if ($sigint_exit) { + print "Received exit signal\n"; + $sigint_pending = 0; + } + if ($sigint_report) { + if ($current_time >= $sigint_received + 2) { + report(); + $sigint_report = 0; + $sigint_pending = 0; + $sigint_processed = 1; + } + } + } + } while ($sigint_pending || $sigint_processed); +} + +signal_loop(); +report(); -- cgit v1.2.3-70-g09d2 From bb72222086260695d71afe60fa105649c1ea9463 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 21 Sep 2009 17:02:48 -0700 Subject: tracing, documentation: add a document describing how to do some performance analysis with tracepoints The documentation for ftrace, events and tracepoints is pretty extensive. Similarly, the perf PCL tools help files --help are there and the code simple enough to figure out what much of the switches mean. However, pulling the discrete bits and pieces together and translating that into "how do I solve a problem" requires a fair amount of imagination. This patch adds a simple document intended to get someone started on the Signed-off-by: Mel Gorman Cc: Rik van Riel Reviewed-by: Ingo Molnar Cc: Larry Woodman Cc: Peter Zijlstra Cc: Li Ming Chun Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/trace/tracepoint-analysis.txt | 327 ++++++++++++++++++++++++++++ 1 file changed, 327 insertions(+) create mode 100644 Documentation/trace/tracepoint-analysis.txt (limited to 'Documentation') diff --git a/Documentation/trace/tracepoint-analysis.txt b/Documentation/trace/tracepoint-analysis.txt new file mode 100644 index 00000000000..5eb4e487e66 --- /dev/null +++ b/Documentation/trace/tracepoint-analysis.txt @@ -0,0 +1,327 @@ + Notes on Analysing Behaviour Using Events and Tracepoints + + Documentation written by Mel Gorman + PCL information heavily based on email from Ingo Molnar + +1. Introduction +=============== + +Tracepoints (see Documentation/trace/tracepoints.txt) can be used without +creating custom kernel modules to register probe functions using the event +tracing infrastructure. + +Simplistically, tracepoints will represent an important event that when can +be taken in conjunction with other tracepoints to build a "Big Picture" of +what is going on within the system. There are a large number of methods for +gathering and interpreting these events. Lacking any current Best Practises, +this document describes some of the methods that can be used. + +This document assumes that debugfs is mounted on /sys/kernel/debug and that +the appropriate tracing options have been configured into the kernel. It is +assumed that the PCL tool tools/perf has been installed and is in your path. + +2. Listing Available Events +=========================== + +2.1 Standard Utilities +---------------------- + +All possible events are visible from /sys/kernel/debug/tracing/events. Simply +calling + + $ find /sys/kernel/debug/tracing/events -type d + +will give a fair indication of the number of events available. + +2.2 PCL +------- + +Discovery and enumeration of all counters and events, including tracepoints +are available with the perf tool. Getting a list of available events is a +simple case of + + $ perf list 2>&1 | grep Tracepoint + ext4:ext4_free_inode [Tracepoint event] + ext4:ext4_request_inode [Tracepoint event] + ext4:ext4_allocate_inode [Tracepoint event] + ext4:ext4_write_begin [Tracepoint event] + ext4:ext4_ordered_write_end [Tracepoint event] + [ .... remaining output snipped .... ] + + +2. Enabling Events +================== + +2.1 System-Wide Event Enabling +------------------------------ + +See Documentation/trace/events.txt for a proper description on how events +can be enabled system-wide. A short example of enabling all events related +to page allocation would look something like + + $ for i in `find /sys/kernel/debug/tracing/events -name "enable" | grep mm_`; do echo 1 > $i; done + +2.2 System-Wide Event Enabling with SystemTap +--------------------------------------------- + +In SystemTap, tracepoints are accessible using the kernel.trace() function +call. The following is an example that reports every 5 seconds what processes +were allocating the pages. + + global page_allocs + + probe kernel.trace("mm_page_alloc") { + page_allocs[execname()]++ + } + + function print_count() { + printf ("%-25s %-s\n", "#Pages Allocated", "Process Name") + foreach (proc in page_allocs-) + printf("%-25d %s\n", page_allocs[proc], proc) + printf ("\n") + delete page_allocs + } + + probe timer.s(5) { + print_count() + } + +2.3 System-Wide Event Enabling with PCL +--------------------------------------- + +By specifying the -a switch and analysing sleep, the system-wide events +for a duration of time can be examined. + + $ perf stat -a \ + -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ + -e kmem:mm_pagevec_free \ + sleep 10 + Performance counter stats for 'sleep 10': + + 9630 kmem:mm_page_alloc + 2143 kmem:mm_page_free_direct + 7424 kmem:mm_pagevec_free + + 10.002577764 seconds time elapsed + +Similarly, one could execute a shell and exit it as desired to get a report +at that point. + +2.4 Local Event Enabling +------------------------ + +Documentation/trace/ftrace.txt describes how to enable events on a per-thread +basis using set_ftrace_pid. + +2.5 Local Event Enablement with PCL +----------------------------------- + +Events can be activate and tracked for the duration of a process on a local +basis using PCL such as follows. + + $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ + -e kmem:mm_pagevec_free ./hackbench 10 + Time: 0.909 + + Performance counter stats for './hackbench 10': + + 17803 kmem:mm_page_alloc + 12398 kmem:mm_page_free_direct + 4827 kmem:mm_pagevec_free + + 0.973913387 seconds time elapsed + +3. Event Filtering +================== + +Documentation/trace/ftrace.txt covers in-depth how to filter events in +ftrace. Obviously using grep and awk of trace_pipe is an option as well +as any script reading trace_pipe. + +4. Analysing Event Variances with PCL +===================================== + +Any workload can exhibit variances between runs and it can be important +to know what the standard deviation in. By and large, this is left to the +performance analyst to do it by hand. In the event that the discrete event +occurrences are useful to the performance analyst, then perf can be used. + + $ perf stat --repeat 5 -e kmem:mm_page_alloc -e kmem:mm_page_free_direct + -e kmem:mm_pagevec_free ./hackbench 10 + Time: 0.890 + Time: 0.895 + Time: 0.915 + Time: 1.001 + Time: 0.899 + + Performance counter stats for './hackbench 10' (5 runs): + + 16630 kmem:mm_page_alloc ( +- 3.542% ) + 11486 kmem:mm_page_free_direct ( +- 4.771% ) + 4730 kmem:mm_pagevec_free ( +- 2.325% ) + + 0.982653002 seconds time elapsed ( +- 1.448% ) + +In the event that some higher-level event is required that depends on some +aggregation of discrete events, then a script would need to be developed. + +Using --repeat, it is also possible to view how events are fluctuating over +time on a system wide basis using -a and sleep. + + $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ + -e kmem:mm_pagevec_free \ + -a --repeat 10 \ + sleep 1 + Performance counter stats for 'sleep 1' (10 runs): + + 1066 kmem:mm_page_alloc ( +- 26.148% ) + 182 kmem:mm_page_free_direct ( +- 5.464% ) + 890 kmem:mm_pagevec_free ( +- 30.079% ) + + 1.002251757 seconds time elapsed ( +- 0.005% ) + +5. Higher-Level Analysis with Helper Scripts +============================================ + +When events are enabled the events that are triggering can be read from +/sys/kernel/debug/tracing/trace_pipe in human-readable format although binary +options exist as well. By post-processing the output, further information can +be gathered on-line as appropriate. Examples of post-processing might include + + o Reading information from /proc for the PID that triggered the event + o Deriving a higher-level event from a series of lower-level events. + o Calculate latencies between two events + +Documentation/trace/postprocess/trace-pagealloc-postprocess.pl is an example +script that can read trace_pipe from STDIN or a copy of a trace. When used +on-line, it can be interrupted once to generate a report without existing +and twice to exit. + +Simplistically, the script just reads STDIN and counts up events but it +also can do more such as + + o Derive high-level events from many low-level events. If a number of pages + are freed to the main allocator from the per-CPU lists, it recognises + that as one per-CPU drain even though there is no specific tracepoint + for that event + o It can aggregate based on PID or individual process number + o In the event memory is getting externally fragmented, it reports + on whether the fragmentation event was severe or moderate. + o When receiving an event about a PID, it can record who the parent was so + that if large numbers of events are coming from very short-lived + processes, the parent process responsible for creating all the helpers + can be identified + +6. Lower-Level Analysis with PCL +================================ + +There may also be a requirement to identify what functions with a program +were generating events within the kernel. To begin this sort of analysis, the +data must be recorded. At the time of writing, this required root + + $ perf record -c 1 \ + -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ + -e kmem:mm_pagevec_free \ + ./hackbench 10 + Time: 0.894 + [ perf record: Captured and wrote 0.733 MB perf.data (~32010 samples) ] + +Note the use of '-c 1' to set the event period to sample. The default sample +period is quite high to minimise overhead but the information collected can be +very coarse as a result. + +This record outputted a file called perf.data which can be analysed using +perf report. + + $ perf report + # Samples: 30922 + # + # Overhead Command Shared Object + # ........ ......... ................................ + # + 87.27% hackbench [vdso] + 6.85% hackbench /lib/i686/cmov/libc-2.9.so + 2.62% hackbench /lib/ld-2.9.so + 1.52% perf [vdso] + 1.22% hackbench ./hackbench + 0.48% hackbench [kernel] + 0.02% perf /lib/i686/cmov/libc-2.9.so + 0.01% perf /usr/bin/perf + 0.01% perf /lib/ld-2.9.so + 0.00% hackbench /lib/i686/cmov/libpthread-2.9.so + # + # (For more details, try: perf report --sort comm,dso,symbol) + # + +According to this, the vast majority of events occured triggered on events +within the VDSO. With simple binaries, this will often be the case so lets +take a slightly different example. In the course of writing this, it was +noticed that X was generating an insane amount of page allocations so lets look +at it + + $ perf record -c 1 -f \ + -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ + -e kmem:mm_pagevec_free \ + -p `pidof X` + +This was interrupted after a few seconds and + + $ perf report + # Samples: 27666 + # + # Overhead Command Shared Object + # ........ ....... ....................................... + # + 51.95% Xorg [vdso] + 47.95% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 + 0.09% Xorg /lib/i686/cmov/libc-2.9.so + 0.01% Xorg [kernel] + # + # (For more details, try: perf report --sort comm,dso,symbol) + # + +So, almost half of the events are occuring in a library. To get an idea which +symbol. + + $ perf report --sort comm,dso,symbol + # Samples: 27666 + # + # Overhead Command Shared Object Symbol + # ........ ....... ....................................... ...... + # + 51.95% Xorg [vdso] [.] 0x000000ffffe424 + 47.93% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 [.] pixmanFillsse2 + 0.09% Xorg /lib/i686/cmov/libc-2.9.so [.] _int_malloc + 0.01% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 [.] pixman_region32_copy_f + 0.01% Xorg [kernel] [k] read_hpet + 0.01% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 [.] get_fast_path + 0.00% Xorg [kernel] [k] ftrace_trace_userstack + +To see where within the function pixmanFillsse2 things are going wrong + + $ perf annotate pixmanFillsse2 + [ ... ] + 0.00 : 34eeb: 0f 18 08 prefetcht0 (%eax) + : } + : + : extern __inline void __attribute__((__gnu_inline__, __always_inline__, _ + : _mm_store_si128 (__m128i *__P, __m128i __B) : { + : *__P = __B; + 12.40 : 34eee: 66 0f 7f 80 40 ff ff movdqa %xmm0,-0xc0(%eax) + 0.00 : 34ef5: ff + 12.40 : 34ef6: 66 0f 7f 80 50 ff ff movdqa %xmm0,-0xb0(%eax) + 0.00 : 34efd: ff + 12.39 : 34efe: 66 0f 7f 80 60 ff ff movdqa %xmm0,-0xa0(%eax) + 0.00 : 34f05: ff + 12.67 : 34f06: 66 0f 7f 80 70 ff ff movdqa %xmm0,-0x90(%eax) + 0.00 : 34f0d: ff + 12.58 : 34f0e: 66 0f 7f 40 80 movdqa %xmm0,-0x80(%eax) + 12.31 : 34f13: 66 0f 7f 40 90 movdqa %xmm0,-0x70(%eax) + 12.40 : 34f18: 66 0f 7f 40 a0 movdqa %xmm0,-0x60(%eax) + 12.31 : 34f1d: 66 0f 7f 40 b0 movdqa %xmm0,-0x50(%eax) + +At a glance, it looks like the time is being spent copying pixmaps to +the card. Further investigation would be needed to determine why pixmaps +are being copied around so much but a starting point would be to take an +ancient build of libpixmap out of the library path where it was totally +forgotten about from months ago! -- cgit v1.2.3-70-g09d2 From 8fbb398f5c78832ee61e0d5ed0793fa8857bd853 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 21 Sep 2009 17:02:49 -0700 Subject: tracing, documentation: Add a document on the kmem tracepoints Knowing tracepoints exist is not quite the same as knowing what they should be used for. This patch adds a document giving a basic description of the kmem tracepoints and why they might be useful to a performance analyst. Signed-off-by: Mel Gorman Cc: Rik van Riel Reviewed-by: Ingo Molnar Cc: Larry Woodman Cc: Peter Zijlstra Cc: Li Ming Chun Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/trace/events-kmem.txt | 107 ++++++++++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 Documentation/trace/events-kmem.txt (limited to 'Documentation') diff --git a/Documentation/trace/events-kmem.txt b/Documentation/trace/events-kmem.txt new file mode 100644 index 00000000000..6ef2a8652e1 --- /dev/null +++ b/Documentation/trace/events-kmem.txt @@ -0,0 +1,107 @@ + Subsystem Trace Points: kmem + +The tracing system kmem captures events related to object and page allocation +within the kernel. Broadly speaking there are four major subheadings. + + o Slab allocation of small objects of unknown type (kmalloc) + o Slab allocation of small objects of known type + o Page allocation + o Per-CPU Allocator Activity + o External Fragmentation + +This document will describe what each of the tracepoints are and why they +might be useful. + +1. Slab allocation of small objects of unknown type +=================================================== +kmalloc call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s +kmalloc_node call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s node=%d +kfree call_site=%lx ptr=%p + +Heavy activity for these events may indicate that a specific cache is +justified, particularly if kmalloc slab pages are getting significantly +internal fragmented as a result of the allocation pattern. By correlating +kmalloc with kfree, it may be possible to identify memory leaks and where +the allocation sites were. + + +2. Slab allocation of small objects of known type +================================================= +kmem_cache_alloc call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s +kmem_cache_alloc_node call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s node=%d +kmem_cache_free call_site=%lx ptr=%p + +These events are similar in usage to the kmalloc-related events except that +it is likely easier to pin the event down to a specific cache. At the time +of writing, no information is available on what slab is being allocated from, +but the call_site can usually be used to extrapolate that information + +3. Page allocation +================== +mm_page_alloc page=%p pfn=%lu order=%d migratetype=%d gfp_flags=%s +mm_page_alloc_zone_locked page=%p pfn=%lu order=%u migratetype=%d cpu=%d percpu_refill=%d +mm_page_free_direct page=%p pfn=%lu order=%d +mm_pagevec_free page=%p pfn=%lu order=%d cold=%d + +These four events deal with page allocation and freeing. mm_page_alloc is +a simple indicator of page allocator activity. Pages may be allocated from +the per-CPU allocator (high performance) or the buddy allocator. + +If pages are allocated directly from the buddy allocator, the +mm_page_alloc_zone_locked event is triggered. This event is important as high +amounts of activity imply high activity on the zone->lock. Taking this lock +impairs performance by disabling interrupts, dirtying cache lines between +CPUs and serialising many CPUs. + +When a page is freed directly by the caller, the mm_page_free_direct event +is triggered. Significant amounts of activity here could indicate that the +callers should be batching their activities. + +When pages are freed using a pagevec, the mm_pagevec_free is +triggered. Broadly speaking, pages are taken off the LRU lock in bulk and +freed in batch with a pagevec. Significant amounts of activity here could +indicate that the system is under memory pressure and can also indicate +contention on the zone->lru_lock. + +4. Per-CPU Allocator Activity +============================= +mm_page_alloc_zone_locked page=%p pfn=%lu order=%u migratetype=%d cpu=%d percpu_refill=%d +mm_page_pcpu_drain page=%p pfn=%lu order=%d cpu=%d migratetype=%d + +In front of the page allocator is a per-cpu page allocator. It exists only +for order-0 pages, reduces contention on the zone->lock and reduces the +amount of writing on struct page. + +When a per-CPU list is empty or pages of the wrong type are allocated, +the zone->lock will be taken once and the per-CPU list refilled. The event +triggered is mm_page_alloc_zone_locked for each page allocated with the +event indicating whether it is for a percpu_refill or not. + +When the per-CPU list is too full, a number of pages are freed, each one +which triggers a mm_page_pcpu_drain event. + +The individual nature of the events are so that pages can be tracked +between allocation and freeing. A number of drain or refill pages that occur +consecutively imply the zone->lock being taken once. Large amounts of PCP +refills and drains could imply an imbalance between CPUs where too much work +is being concentrated in one place. It could also indicate that the per-CPU +lists should be a larger size. Finally, large amounts of refills on one CPU +and drains on another could be a factor in causing large amounts of cache +line bounces due to writes between CPUs and worth investigating if pages +can be allocated and freed on the same CPU through some algorithm change. + +5. External Fragmentation +========================= +mm_page_alloc_extfrag page=%p pfn=%lu alloc_order=%d fallback_order=%d pageblock_order=%d alloc_migratetype=%d fallback_migratetype=%d fragmenting=%d change_ownership=%d + +External fragmentation affects whether a high-order allocation will be +successful or not. For some types of hardware, this is important although +it is avoided where possible. If the system is using huge pages and needs +to be able to resize the pool over the lifetime of the system, this value +is important. + +Large numbers of this event implies that memory is fragmenting and +high-order allocations will start failing at some time in the future. One +means of reducing the occurange of this event is to increase the size of +min_free_kbytes in increments of 3*pageblock_size*nr_online_nodes where +pageblock_size is usually the size of the default hugepage size. -- cgit v1.2.3-70-g09d2 From 495789a51a91cb8c015d8d77fecbac1caf20b186 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 21 Sep 2009 17:03:14 -0700 Subject: oom: make oom_score to per-process value oom-killer kills a process, not task. Then oom_score should be calculated as per-process too. it makes consistency more and makes speed up select_bad_process(). Signed-off-by: KOSAKI Motohiro Cc: Paul Menage Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 2 +- fs/proc/base.c | 2 +- mm/oom_kill.c | 35 +++++++++++++++++++++++++++++------ 3 files changed, 31 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index ae7f8bb1b7b..75988ba26a5 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1205,7 +1205,7 @@ The following heuristics are then applied: * if the task was reniced, its score doubles * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE or CAP_SYS_RAWIO) have their score divided by 4 - * if oom condition happened in one cpuset and checked task does not belong + * if oom condition happened in one cpuset and checked process does not belong to it, its score is divided by 8 * the resulting score is multiplied by two to the power of oom_adj, i.e. points <<= oom_adj when it is positive and diff --git a/fs/proc/base.c b/fs/proc/base.c index 81cfff82875..71a34253dcb 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -447,7 +447,7 @@ static int proc_oom_score(struct task_struct *task, char *buffer) do_posix_clock_monotonic_gettime(&uptime); read_lock(&tasklist_lock); - points = badness(task, uptime.tv_sec); + points = badness(task->group_leader, uptime.tv_sec); read_unlock(&tasklist_lock); return sprintf(buffer, "%lu\n", points); } diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 630b77fe862..37269229484 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -34,6 +34,23 @@ int sysctl_oom_dump_tasks; static DEFINE_SPINLOCK(zone_scan_lock); /* #define DEBUG */ +/* + * Is all threads of the target process nodes overlap ours? + */ +static int has_intersects_mems_allowed(struct task_struct *tsk) +{ + struct task_struct *t; + + t = tsk; + do { + if (cpuset_mems_allowed_intersects(current, t)) + return 1; + t = next_thread(t); + } while (t != tsk); + + return 0; +} + /** * badness - calculate a numeric value for how bad this task has been * @p: task struct of which task we should calculate @@ -59,6 +76,9 @@ unsigned long badness(struct task_struct *p, unsigned long uptime) struct mm_struct *mm; struct task_struct *child; int oom_adj = p->signal->oom_adj; + struct task_cputime task_time; + unsigned long utime; + unsigned long stime; if (oom_adj == OOM_DISABLE) return 0; @@ -106,8 +126,11 @@ unsigned long badness(struct task_struct *p, unsigned long uptime) * of seconds. There is no particular reason for this other than * that it turned out to work very well in practice. */ - cpu_time = (cputime_to_jiffies(p->utime) + cputime_to_jiffies(p->stime)) - >> (SHIFT_HZ + 3); + thread_group_cputime(p, &task_time); + utime = cputime_to_jiffies(task_time.utime); + stime = cputime_to_jiffies(task_time.stime); + cpu_time = (utime + stime) >> (SHIFT_HZ + 3); + if (uptime >= p->start_time.tv_sec) run_time = (uptime - p->start_time.tv_sec) >> 10; @@ -148,7 +171,7 @@ unsigned long badness(struct task_struct *p, unsigned long uptime) * because p may have allocated or otherwise mapped memory on * this node before. However it will be less likely. */ - if (!cpuset_mems_allowed_intersects(current, p)) + if (!has_intersects_mems_allowed(p)) points /= 8; /* @@ -204,13 +227,13 @@ static inline enum oom_constraint constrained_alloc(struct zonelist *zonelist, static struct task_struct *select_bad_process(unsigned long *ppoints, struct mem_cgroup *mem) { - struct task_struct *g, *p; + struct task_struct *p; struct task_struct *chosen = NULL; struct timespec uptime; *ppoints = 0; do_posix_clock_monotonic_gettime(&uptime); - do_each_thread(g, p) { + for_each_process(p) { unsigned long points; /* @@ -263,7 +286,7 @@ static struct task_struct *select_bad_process(unsigned long *ppoints, chosen = p; *ppoints = points; } - } while_each_thread(g, p); + } return chosen; } -- cgit v1.2.3-70-g09d2 From 5d3bc2709114b416cab588c577e02c2470e40a6c Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Mon, 21 Sep 2009 17:03:21 -0700 Subject: mm: fix NUMA accounting in numastat.txt In Documentation/numastat.txt, it confused me. For example, there are nodes [0,1] in system. barrios:~$ cat /proc/zoneinfo | egrep 'numa|zone' Node 0, zone DMA numa_hit 33226 numa_miss 1739 numa_foreign 27978 .. .. Node 1, zone DMA numa_hit 307 numa_miss 46900 numa_foreign 0 1) In node 0, NUMA_MISS means it wanted to allocate page in node 1 but ended up with page in node 0 2) In node 0, NUMA_FOREIGN means it wanted to allocate page in node 0 but ended up with page from Node 1. But now, numastat explains it oppositely about (MISS, FOREIGN). Let's fix up with viewpoint of zone. Signed-off-by: Minchan Kim Cc: KAMEZAWA Hiroyuki Acked-by: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/numastat.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/numastat.txt b/Documentation/numastat.txt index 80133ace1eb..9fcc9a608dc 100644 --- a/Documentation/numastat.txt +++ b/Documentation/numastat.txt @@ -7,10 +7,10 @@ All units are pages. Hugepages have separate counters. numa_hit A process wanted to allocate memory from this node, and succeeded. -numa_miss A process wanted to allocate memory from this node, - but ended up with memory from another. -numa_foreign A process wanted to allocate on another node, - but ended up with memory from this one. +numa_miss A process wanted to allocate memory from another node, + but ended up with memory from this node. +numa_foreign A process wanted to allocate on this node, + but ended up with memory from another one. local_node A process ran on this node and got memory from it. other_node A process ran on this node and got memory from another node. interleave_hit Interleaving wanted to allocate from this node -- cgit v1.2.3-70-g09d2 From 94bf5ceac095c7d4cb5e4d40fa7e2dd81d722b75 Mon Sep 17 00:00:00 2001 From: Eric B Munson Date: Mon, 21 Sep 2009 17:03:48 -0700 Subject: hugetlb: add MAP_HUGETLB example Add an example of how to use the MAP_HUGETLB flag to the vm documentation directory and a reference to the example in hugetlbpage.txt. Signed-off-by: Eric B Munson Acked-by: David Rientjes Cc: Mel Gorman Cc: Adam Litke Cc: David Gibson Cc: Lee Schermerhorn Cc: Nick Piggin Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/vm/00-INDEX | 2 ++ Documentation/vm/hugetlbpage.txt | 14 ++++---- Documentation/vm/map_hugetlb.c | 77 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 87 insertions(+), 6 deletions(-) create mode 100644 Documentation/vm/map_hugetlb.c (limited to 'Documentation') diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX index f80a4494487..e57d6a9dd32 100644 --- a/Documentation/vm/00-INDEX +++ b/Documentation/vm/00-INDEX @@ -22,3 +22,5 @@ slabinfo.c - source code for a tool to get reports about slabs. slub.txt - a short users guide for SLUB. +map_hugetlb.c + - an example program that uses the MAP_HUGETLB mmap flag. diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index 3a167be78c2..82a7bd1800b 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -187,12 +187,14 @@ Regular chown, chgrp, and chmod commands (with right permissions) could be used to change the file attributes on hugetlbfs. Also, it is important to note that no such mount command is required if the -applications are going to use only shmat/shmget system calls. Users who -wish to use hugetlb page via shared memory segment should be a member of -a supplementary group and system admin needs to configure that gid into -/proc/sys/vm/hugetlb_shm_group. It is possible for same or different -applications to use any combination of mmaps and shm* calls, though the -mount of filesystem will be required for using mmap calls. +applications are going to use only shmat/shmget system calls or mmap with +MAP_HUGETLB. Users who wish to use hugetlb page via shared memory segment +should be a member of a supplementary group and system admin needs to +configure that gid into /proc/sys/vm/hugetlb_shm_group. It is possible for +same or different applications to use any combination of mmaps and shm* +calls, though the mount of filesystem will be required for using mmap calls +without MAP_HUGETLB. For an example of how to use mmap with MAP_HUGETLB see +map_hugetlb.c. ******************************************************************* diff --git a/Documentation/vm/map_hugetlb.c b/Documentation/vm/map_hugetlb.c new file mode 100644 index 00000000000..e2bdae37f49 --- /dev/null +++ b/Documentation/vm/map_hugetlb.c @@ -0,0 +1,77 @@ +/* + * Example of using hugepage memory in a user application using the mmap + * system call with MAP_HUGETLB flag. Before running this program make + * sure the administrator has allocated enough default sized huge pages + * to cover the 256 MB allocation. + * + * For ia64 architecture, Linux kernel reserves Region number 4 for hugepages. + * That means the addresses starting with 0x800000... will need to be + * specified. Specifying a fixed address is not required on ppc64, i386 + * or x86_64. + */ +#include +#include +#include +#include +#include + +#define LENGTH (256UL*1024*1024) +#define PROTECTION (PROT_READ | PROT_WRITE) + +#ifndef MAP_HUGETLB +#define MAP_HUGETLB 0x40 +#endif + +/* Only ia64 requires this */ +#ifdef __ia64__ +#define ADDR (void *)(0x8000000000000000UL) +#define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB | MAP_FIXED) +#else +#define ADDR (void *)(0x0UL) +#define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB) +#endif + +void check_bytes(char *addr) +{ + printf("First hex is %x\n", *((unsigned int *)addr)); +} + +void write_bytes(char *addr) +{ + unsigned long i; + + for (i = 0; i < LENGTH; i++) + *(addr + i) = (char)i; +} + +void read_bytes(char *addr) +{ + unsigned long i; + + check_bytes(addr); + for (i = 0; i < LENGTH; i++) + if (*(addr + i) != (char)i) { + printf("Mismatch at %lu\n", i); + break; + } +} + +int main(void) +{ + void *addr; + + addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, 0, 0); + if (addr == MAP_FAILED) { + perror("mmap"); + exit(1); + } + + printf("Returned address is %p\n", addr); + check_bytes(addr); + write_bytes(addr); + read_bytes(addr); + + munmap(addr, LENGTH); + + return 0; +} -- cgit v1.2.3-70-g09d2 From 63209a71e8e7727f52208d17bb7180cd392edcfb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 22 Sep 2009 08:50:32 -0700 Subject: regulator: Add some brief design documentation Provide some brief documentation of some of the design decisions that are made by the regulator API. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- Documentation/power/regulator/design.txt | 33 ++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/power/regulator/design.txt (limited to 'Documentation') diff --git a/Documentation/power/regulator/design.txt b/Documentation/power/regulator/design.txt new file mode 100644 index 00000000000..f9b56b72b78 --- /dev/null +++ b/Documentation/power/regulator/design.txt @@ -0,0 +1,33 @@ +Regulator API design notes +========================== + +This document provides a brief, partially structured, overview of some +of the design considerations which impact the regulator API design. + +Safety +------ + + - Errors in regulator configuration can have very serious consequences + for the system, potentially including lasting hardware damage. + - It is not possible to automatically determine the power confugration + of the system - software-equivalent variants of the same chip may + have different power requirments, and not all components with power + requirements are visible to software. + + => The API should make no changes to the hardware state unless it has + specific knowledge that these changes are safe to do perform on + this particular system. + +Consumer use cases +------------------ + + - The overwhelming majority of devices in a system will have no + requirement to do any runtime configuration of their power beyond + being able to turn it on or off. + + - Many of the power supplies in the system will be shared between many + different consumers. + + => The consumer API should be structured so that these use cases are + very easy to handle and so that consumers will work with shared + supplies without any additional effort. -- cgit v1.2.3-70-g09d2 From 3ca4f5ca73057a617f9444a91022d7127041970a Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Fri, 31 Jul 2009 15:25:56 +0900 Subject: virtio: add virtio IDs file Virtio IDs are spread all over the tree which makes assigning new IDs bothersome. Putting them together should make the process less error-prone. Signed-off-by: Fernando Luis Vazquez Cao Signed-off-by: Rusty Russell --- Documentation/lguest/lguest.c | 1 + drivers/block/virtio_blk.c | 1 + drivers/char/hw_random/virtio-rng.c | 1 + drivers/char/virtio_console.c | 1 + drivers/net/virtio_net.c | 1 + drivers/virtio/virtio_balloon.c | 1 + include/linux/virtio_9p.h | 2 -- include/linux/virtio_balloon.h | 3 --- include/linux/virtio_blk.h | 3 --- include/linux/virtio_console.h | 3 --- include/linux/virtio_ids.h | 17 +++++++++++++++++ include/linux/virtio_net.h | 3 --- include/linux/virtio_rng.h | 3 --- net/9p/trans_virtio.c | 1 + 14 files changed, 24 insertions(+), 17 deletions(-) create mode 100644 include/linux/virtio_ids.h (limited to 'Documentation') diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 950cde6d6e5..84bbb190bf7 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -42,6 +42,7 @@ #include #include "linux/lguest_launcher.h" #include "linux/virtio_config.h" +#include #include "linux/virtio_net.h" #include "linux/virtio_blk.h" #include "linux/virtio_console.h" diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index d739ee4201f..73de7532fcf 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -3,6 +3,7 @@ #include #include #include +#include #include #include diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c index b6c24dcc987..962968f05b9 100644 --- a/drivers/char/hw_random/virtio-rng.c +++ b/drivers/char/hw_random/virtio-rng.c @@ -21,6 +21,7 @@ #include #include #include +#include #include /* The host will fill any buffer we give it with sweet, sweet randomness. We diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index a035ae39a35..0d328b59568 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include "hvc_console.h" diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fbf04a553f5..5c498d2b043 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 39789232646..200c22f5513 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -19,6 +19,7 @@ */ //#define DEBUG #include +#include #include #include #include diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h index b3c4a60ceeb..ea7226a45ac 100644 --- a/include/linux/virtio_9p.h +++ b/include/linux/virtio_9p.h @@ -4,8 +4,6 @@ * compatible drivers/servers. */ #include -/* The ID for virtio console */ -#define VIRTIO_ID_9P 9 /* Maximum number of virtio channels per partition (1 for now) */ #define MAX_9P_CHAN 1 diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h index 8726ff77763..09d73008506 100644 --- a/include/linux/virtio_balloon.h +++ b/include/linux/virtio_balloon.h @@ -4,9 +4,6 @@ * compatible drivers/servers. */ #include -/* The ID for virtio_balloon */ -#define VIRTIO_ID_BALLOON 5 - /* The feature bitmap for virtio balloon */ #define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */ diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index 8dab9f2b883..25fbabfa90d 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -5,9 +5,6 @@ #include #include -/* The ID for virtio_block */ -#define VIRTIO_ID_BLOCK 2 - /* Feature bits */ #define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */ #define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */ diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h index dc161115ae3..b5f51980601 100644 --- a/include/linux/virtio_console.h +++ b/include/linux/virtio_console.h @@ -5,9 +5,6 @@ /* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so * anyone can use the definitions to implement compatible drivers/servers. */ -/* The ID for virtio console */ -#define VIRTIO_ID_CONSOLE 3 - /* Feature bits */ #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h new file mode 100644 index 00000000000..06660c0a78d --- /dev/null +++ b/include/linux/virtio_ids.h @@ -0,0 +1,17 @@ +#ifndef _LINUX_VIRTIO_IDS_H +#define _LINUX_VIRTIO_IDS_H +/* + * Virtio IDs + * + * This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + */ + +#define VIRTIO_ID_NET 1 /* virtio net */ +#define VIRTIO_ID_BLOCK 2 /* virtio block */ +#define VIRTIO_ID_CONSOLE 3 /* virtio console */ +#define VIRTIO_ID_RNG 4 /* virtio ring */ +#define VIRTIO_ID_BALLOON 5 /* virtio balloon */ +#define VIRTIO_ID_9P 9 /* 9p virtio console */ + +#endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index d8dd539c9f4..1f41734bbb7 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -6,9 +6,6 @@ #include #include -/* The ID for virtio_net */ -#define VIRTIO_ID_NET 1 - /* The feature bitmap for virtio net */ #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h index 1a85dab8a94..48121c3c434 100644 --- a/include/linux/virtio_rng.h +++ b/include/linux/virtio_rng.h @@ -4,7 +4,4 @@ * compatible drivers/servers. */ #include -/* The ID for virtio_rng */ -#define VIRTIO_ID_RNG 4 - #endif /* _LINUX_VIRTIO_RNG_H */ diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index ea1e3daabef..b2e07f0dd29 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #define VIRTQUEUE_NUM 128 -- cgit v1.2.3-70-g09d2 From ca60a42c9be41c07ebcc2ec8c43dd1be53f147bf Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 23 Sep 2009 22:26:47 -0600 Subject: lguest: don't force VIRTIO_F_NOTIFY_ON_EMPTY VIRTIO_F_NOTIFY_ON_EMPTY indicates to the Guest that we will hit them with an interrupt every time the xmit queue is emptied. Because it results in lots of tx interrupts, modern Guests probably don't want it, so let's only force it when they accept the option. Signed-off-by: Rusty Russell --- Documentation/lguest/lguest.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 84bbb190bf7..ba9373f82ab 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -134,6 +134,9 @@ struct device { /* Is it operational */ bool running; + /* Does Guest want an intrrupt on empty? */ + bool irq_on_empty; + /* Device-specific data. */ void *priv; }; @@ -624,10 +627,13 @@ static void trigger_irq(struct virtqueue *vq) return; vq->pending_used = 0; - /* If they don't want an interrupt, don't send one, unless empty. */ - if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) - && lg_last_avail(vq) != vq->vring.avail->idx) - return; + /* If they don't want an interrupt, don't send one... */ + if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) { + /* ... unless they've asked us to force one on empty. */ + if (!vq->dev->irq_on_empty + || lg_last_avail(vq) != vq->vring.avail->idx) + return; + } /* Send the Guest an interrupt tell them we used something up. */ if (write(lguest_fd, buf, sizeof(buf)) != 0) @@ -1043,6 +1049,15 @@ static void create_thread(struct virtqueue *vq) close(vq->eventfd); } +static bool accepted_feature(struct device *dev, unsigned int bit) +{ + const u8 *features = get_feature_bits(dev) + dev->feature_len; + + if (dev->feature_len < bit / CHAR_BIT) + return false; + return features[bit / CHAR_BIT] & (1 << (bit % CHAR_BIT)); +} + static void start_device(struct device *dev) { unsigned int i; @@ -1056,6 +1071,8 @@ static void start_device(struct device *dev) verbose(" %02x", get_feature_bits(dev) [dev->feature_len+i]); + dev->irq_on_empty = accepted_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY); + for (vq = dev->vq; vq; vq = vq->next) { if (vq->service) create_thread(vq); -- cgit v1.2.3-70-g09d2 From f4e2332cfcf900e0a926c4e0fc35f751bcbcaa1b Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Wed, 10 Jun 2009 15:23:52 -0600 Subject: USB: usbmon: touch up the documentation I think this sentence was confusing regarding the possible size of the data area. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/usbmon.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt index 6c3c625b7f3..4efd8470921 100644 --- a/Documentation/usb/usbmon.txt +++ b/Documentation/usb/usbmon.txt @@ -305,7 +305,7 @@ Before the call, hdr, data, and alloc should be filled. Upon return, the area pointed by hdr contains the next event structure, and the data buffer contains the data, if any. The event is removed from the kernel buffer. -The MON_IOCX_GET copies 48 bytes, MON_IOCX_GETX copies 64 bytes. +The MON_IOCX_GET copies 48 bytes to hdr area, MON_IOCX_GETX copies 64 bytes. MON_IOCX_MFETCH, defined as _IOWR(MON_IOC_MAGIC, 7, struct mon_mfetch_arg) -- cgit v1.2.3-70-g09d2 From f0cc82a831d4d839eb6b67c7c046ebd2d1d7c4c2 Mon Sep 17 00:00:00 2001 From: Rogério Brito Date: Sat, 22 Aug 2009 17:33:53 -0300 Subject: USB: fix paths in usbmon documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hi there. On Aug 21 2009, Alan Stern wrote: > On Thu, 20 Aug 2009, Rogério Brito wrote: > > Again, just reiterating, what I said before, even though I am not sure > > if I can reproduce it, I will try to. > > A usbmon trace showing what happens when you plug in the drive and > when you run smartctl would help. The documentation for usbmon in the kernel 2.6.31-rc7 kernel doesn't match what the kernel exposes in the debug fs tree. This patch fixes it. Signed-off-by: Rogério Brito Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/usbmon.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt index 4efd8470921..66f92d1194c 100644 --- a/Documentation/usb/usbmon.txt +++ b/Documentation/usb/usbmon.txt @@ -33,7 +33,7 @@ if usbmon is built into the kernel. Verify that bus sockets are present. -# ls /sys/kernel/debug/usbmon +# ls /sys/kernel/debug/usb/usbmon 0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u # @@ -58,11 +58,11 @@ Bus=03 means it's bus 3. 3. Start 'cat' -# cat /sys/kernel/debug/usbmon/3u > /tmp/1.mon.out +# cat /sys/kernel/debug/usb/usbmon/3u > /tmp/1.mon.out to listen on a single bus, otherwise, to listen on all buses, type: -# cat /sys/kernel/debug/usbmon/0u > /tmp/1.mon.out +# cat /sys/kernel/debug/usb/usbmon/0u > /tmp/1.mon.out This process will be reading until killed. Naturally, the output can be redirected to a desirable location. This is preferred, because it is going -- cgit v1.2.3-70-g09d2 From 9780bc41dca728f9b082a42d9e1f1716d5057081 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 20 Aug 2009 15:39:57 -0500 Subject: USB: ehci-dbgp,documentation: Documentation updates for ehci-dbgp Add missing information about requirements of using the EHCI usb debug controller as well as to mention you can use a debug controller other than the first one in the system. Signed-off-by: Jason Wessel Cc: Ingo Molnar Cc: Andrew Morton Cc: Yinghai Lu Cc: "Eric W. Biederman" Cc: Alan Stern Cc: Sarah Sharp Cc: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 2 +- Documentation/x86/earlyprintk.txt | 39 +++++++++++++++++++++++++++++++++++-- 2 files changed, 38 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c363840cdce..6fa7292947e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -671,7 +671,7 @@ and is between 256 and 4096 characters. It is defined in the file earlyprintk= [X86,SH,BLACKFIN] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] - earlyprintk=dbgp + earlyprintk=dbgp[debugController#] Append ",keep" to not disable it when the real console takes over. diff --git a/Documentation/x86/earlyprintk.txt b/Documentation/x86/earlyprintk.txt index 607b1a01606..f19802c0f48 100644 --- a/Documentation/x86/earlyprintk.txt +++ b/Documentation/x86/earlyprintk.txt @@ -7,7 +7,7 @@ and two USB cables, connected like this: [host/target] <-------> [USB debug key] <-------> [client/console] -1. There are three specific hardware requirements: +1. There are a number of specific hardware requirements: a.) Host/target system needs to have USB debug port capability. @@ -42,7 +42,35 @@ and two USB cables, connected like this: This is a small blue plastic connector with two USB connections, it draws power from its USB connections. - c.) Thirdly, you need a second client/console system with a regular USB port. + c.) You need a second client/console system with a high speed USB 2.0 + port. + + d.) The Netchip device must be plugged directly into the physical + debug port on the "host/target" system. You cannot use a USB hub in + between the physical debug port and the "host/target" system. + + The EHCI debug controller is bound to a specific physical USB + port and the Netchip device will only work as an early printk + device in this port. The EHCI host controllers are electrically + wired such that the EHCI debug controller is hooked up to the + first physical and there is no way to change this via software. + You can find the physical port through experimentation by trying + each physical port on the system and rebooting. Or you can try + and use lsusb or look at the kernel info messages emitted by the + usb stack when you plug a usb device into various ports on the + "host/target" system. + + Some hardware vendors do not expose the usb debug port with a + physical connector and if you find such a device send a complaint + to the hardware vendor, because there is no reason not to wire + this port into one of the physically accessible ports. + + e.) It is also important to note, that many versions of the Netchip + device require the "client/console" system to be plugged into the + right and side of the device (with the product logo facing up and + readable left to right). The reason being is that the 5 volt + power supply is taken from only one side of the device and it + must be the side that does not get rebooted. 2. Software requirements: @@ -56,6 +84,13 @@ and two USB cables, connected like this: (If you are using Grub, append it to the 'kernel' line in /etc/grub.conf) + On systems with more than one EHCI debug controller you must + specify the correct EHCI debug controller number. The ordering + comes from the PCI bus enumeration of the EHCI controllers. The + default with no number argument is "0" the first EHCI debug + controller. To use the second EHCI debug controller, you would + use the command line: "earlyprintk=dbgp1" + NOTE: normally earlyprintk console gets turned off once the regular console is alive - use "earlyprintk=dbgp,keep" to keep this channel open beyond early bootup. This can be useful for -- cgit v1.2.3-70-g09d2 From a87371b477774b290c27bc5cb7f4ccc5379574a9 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 12 Sep 2009 17:00:46 +0200 Subject: USB: Fix sysfs paths in documentation Neither /sys/usb/devices nor /sys/bus/devices exist. The correct path is /sys/bus/usb/devices. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/authorization.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt index 381b22ee783..c069b6884c7 100644 --- a/Documentation/usb/authorization.txt +++ b/Documentation/usb/authorization.txt @@ -16,20 +16,20 @@ Usage: Authorize a device to connect: -$ echo 1 > /sys/usb/devices/DEVICE/authorized +$ echo 1 > /sys/bus/usb/devices/DEVICE/authorized Deauthorize a device: -$ echo 0 > /sys/usb/devices/DEVICE/authorized +$ echo 0 > /sys/bus/usb/devices/DEVICE/authorized Set new devices connected to hostX to be deauthorized by default (ie: lock down): -$ echo 0 > /sys/bus/devices/usbX/authorized_default +$ echo 0 > /sys/bus/usb/devices/usbX/authorized_default Remove the lock down: -$ echo 1 > /sys/bus/devices/usbX/authorized_default +$ echo 1 > /sys/bus/usb/devices/usbX/authorized_default By default, Wired USB devices are authorized by default to connect. Wireless USB hosts deauthorize by default all new connected @@ -47,7 +47,7 @@ USB port): boot up rc.local -> - for host in /sys/bus/devices/usb* + for host in /sys/bus/usb/devices/usb* do echo 0 > $host/authorized_default done -- cgit v1.2.3-70-g09d2 From af91322ef3f29ae4114e736e2a72e28b4d619cf9 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Tue, 22 Sep 2009 16:43:33 -0700 Subject: printk: add printk_delay to make messages readable for some scenarios When syslog is not possible, at the same time there's no serial/net console available, it will be hard to read the printk messages. For example oops/panic/warning messages in shutdown phase. Add a printk delay feature, we can make each printk message delay some milliseconds. Setting the delay by proc/sysctl interface: /proc/sys/kernel/printk_delay The value range from 0 - 10000, default value is 0 [akpm@linux-foundation.org: fix a few things] Signed-off-by: Dave Young Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/sysctl/kernel.txt | 8 ++++++++ include/linux/kernel.h | 2 ++ kernel/printk.c | 15 +++++++++++++++ kernel/sysctl.c | 14 ++++++++++++++ 4 files changed, 39 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 3e5b63ebb82..b3d8b492274 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -313,6 +313,14 @@ send before ratelimiting kicks in. ============================================================== +printk_delay: + +Delay each printk message in printk_delay milliseconds + +Value from 0 - 10000 is allowed. + +============================================================== + randomize-va-space: This option can be used to select the type of process address diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 2b5b1e0899a..0a2a1908786 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -246,6 +246,8 @@ extern int printk_ratelimit(void); extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, unsigned int interval_msec); +extern int printk_delay_msec; + /* * Print a one-time message (analogous to WARN_ONCE() et al): */ diff --git a/kernel/printk.c b/kernel/printk.c index 932ea21feb1..f38b07f78a4 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -653,6 +653,20 @@ static int recursion_bug; static int new_text_line = 1; static char printk_buf[1024]; +int printk_delay_msec __read_mostly; + +static inline void printk_delay(void) +{ + if (unlikely(printk_delay_msec)) { + int m = printk_delay_msec; + + while (m--) { + mdelay(1); + touch_nmi_watchdog(); + } + } +} + asmlinkage int vprintk(const char *fmt, va_list args) { int printed_len = 0; @@ -662,6 +676,7 @@ asmlinkage int vprintk(const char *fmt, va_list args) char *p; boot_delay_msec(); + printk_delay(); preempt_disable(); /* This stops the holder of console_sem just where we want him */ diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 6ba49c7cb12..0dfaa47d7cb 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -106,6 +106,9 @@ static int __maybe_unused one = 1; static int __maybe_unused two = 2; static unsigned long one_ul = 1; static int one_hundred = 100; +#ifdef CONFIG_PRINTK +static int ten_thousand = 10000; +#endif /* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */ static unsigned long dirty_bytes_min = 2 * PAGE_SIZE; @@ -722,6 +725,17 @@ static struct ctl_table kern_table[] = { .mode = 0644, .proc_handler = &proc_dointvec, }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "printk_delay", + .data = &printk_delay_msec, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &zero, + .extra2 = &ten_thousand, + }, #endif { .ctl_name = KERN_NGROUPS_MAX, -- cgit v1.2.3-70-g09d2 From b7ed698cc9d556306a4088c238e2ea9311ea2cb3 Mon Sep 17 00:00:00 2001 From: Ladinu Chandrasinghe Date: Tue, 22 Sep 2009 16:43:42 -0700 Subject: Documentation/: fix warnings from -Wmissing-prototypes in HOSTCFLAGS Fix up -Wmissing-prototypes in compileable userspace code, mainly under Documentation/. Signed-off-by: Ladinu Chandrasinghe Signed-off-by: Trevor Keith Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/accounting/getdelays.c | 12 ++--- Documentation/auxdisplay/cfag12864b-example.c | 22 ++++----- Documentation/ia64/aliasing-test.c | 8 ++-- Documentation/pcmcia/crc32hash.c | 2 +- Documentation/spi/spidev_test.c | 4 +- Documentation/video4linux/v4lgrab.c | 2 +- Documentation/vm/page-types.c | 52 ++++++++++---------- Documentation/vm/slabinfo.c | 68 +++++++++++++-------------- Documentation/watchdog/src/watchdog-test.c | 2 +- firmware/ihex2fw.c | 2 +- scripts/genksyms/genksyms.c | 6 +-- 11 files changed, 90 insertions(+), 90 deletions(-) (limited to 'Documentation') diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c index aa73e72fd79..6e25c2659e0 100644 --- a/Documentation/accounting/getdelays.c +++ b/Documentation/accounting/getdelays.c @@ -116,7 +116,7 @@ error: } -int send_cmd(int sd, __u16 nlmsg_type, __u32 nlmsg_pid, +static int send_cmd(int sd, __u16 nlmsg_type, __u32 nlmsg_pid, __u8 genl_cmd, __u16 nla_type, void *nla_data, int nla_len) { @@ -160,7 +160,7 @@ int send_cmd(int sd, __u16 nlmsg_type, __u32 nlmsg_pid, * Probe the controller in genetlink to find the family id * for the TASKSTATS family */ -int get_family_id(int sd) +static int get_family_id(int sd) { struct { struct nlmsghdr n; @@ -190,7 +190,7 @@ int get_family_id(int sd) return id; } -void print_delayacct(struct taskstats *t) +static void print_delayacct(struct taskstats *t) { printf("\n\nCPU %15s%15s%15s%15s\n" " %15llu%15llu%15llu%15llu\n" @@ -216,7 +216,7 @@ void print_delayacct(struct taskstats *t) (unsigned long long)t->freepages_delay_total); } -void task_context_switch_counts(struct taskstats *t) +static void task_context_switch_counts(struct taskstats *t) { printf("\n\nTask %15s%15s\n" " %15llu%15llu\n", @@ -224,7 +224,7 @@ void task_context_switch_counts(struct taskstats *t) (unsigned long long)t->nvcsw, (unsigned long long)t->nivcsw); } -void print_cgroupstats(struct cgroupstats *c) +static void print_cgroupstats(struct cgroupstats *c) { printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, " "uninterruptible %llu\n", (unsigned long long)c->nr_sleeping, @@ -235,7 +235,7 @@ void print_cgroupstats(struct cgroupstats *c) } -void print_ioacct(struct taskstats *t) +static void print_ioacct(struct taskstats *t) { printf("%s: read=%llu, write=%llu, cancelled_write=%llu\n", t->ac_comm, diff --git a/Documentation/auxdisplay/cfag12864b-example.c b/Documentation/auxdisplay/cfag12864b-example.c index 2caeea5e499..1d2c010bae1 100644 --- a/Documentation/auxdisplay/cfag12864b-example.c +++ b/Documentation/auxdisplay/cfag12864b-example.c @@ -62,7 +62,7 @@ unsigned char cfag12864b_buffer[CFAG12864B_SIZE]; * Unable to open: return = -1 * Unable to mmap: return = -2 */ -int cfag12864b_init(char *path) +static int cfag12864b_init(char *path) { cfag12864b_fd = open(path, O_RDWR); if (cfag12864b_fd == -1) @@ -81,7 +81,7 @@ int cfag12864b_init(char *path) /* * exit a cfag12864b framebuffer device */ -void cfag12864b_exit(void) +static void cfag12864b_exit(void) { munmap(cfag12864b_mem, CFAG12864B_SIZE); close(cfag12864b_fd); @@ -90,7 +90,7 @@ void cfag12864b_exit(void) /* * set (x, y) pixel */ -void cfag12864b_set(unsigned char x, unsigned char y) +static void cfag12864b_set(unsigned char x, unsigned char y) { if (CFAG12864B_CHECK(x, y)) cfag12864b_buffer[CFAG12864B_ADDRESS(x, y)] |= @@ -100,7 +100,7 @@ void cfag12864b_set(unsigned char x, unsigned char y) /* * unset (x, y) pixel */ -void cfag12864b_unset(unsigned char x, unsigned char y) +static void cfag12864b_unset(unsigned char x, unsigned char y) { if (CFAG12864B_CHECK(x, y)) cfag12864b_buffer[CFAG12864B_ADDRESS(x, y)] &= @@ -113,7 +113,7 @@ void cfag12864b_unset(unsigned char x, unsigned char y) * Pixel off: return = 0 * Pixel on: return = 1 */ -unsigned char cfag12864b_isset(unsigned char x, unsigned char y) +static unsigned char cfag12864b_isset(unsigned char x, unsigned char y) { if (CFAG12864B_CHECK(x, y)) if (cfag12864b_buffer[CFAG12864B_ADDRESS(x, y)] & @@ -126,7 +126,7 @@ unsigned char cfag12864b_isset(unsigned char x, unsigned char y) /* * not (x, y) pixel */ -void cfag12864b_not(unsigned char x, unsigned char y) +static void cfag12864b_not(unsigned char x, unsigned char y) { if (cfag12864b_isset(x, y)) cfag12864b_unset(x, y); @@ -137,7 +137,7 @@ void cfag12864b_not(unsigned char x, unsigned char y) /* * fill (set all pixels) */ -void cfag12864b_fill(void) +static void cfag12864b_fill(void) { unsigned short i; @@ -148,7 +148,7 @@ void cfag12864b_fill(void) /* * clear (unset all pixels) */ -void cfag12864b_clear(void) +static void cfag12864b_clear(void) { unsigned short i; @@ -162,7 +162,7 @@ void cfag12864b_clear(void) * Pixel off: src[i] = 0 * Pixel on: src[i] > 0 */ -void cfag12864b_format(unsigned char * matrix) +static void cfag12864b_format(unsigned char * matrix) { unsigned char i, j, n; @@ -182,7 +182,7 @@ void cfag12864b_format(unsigned char * matrix) /* * blit buffer to lcd */ -void cfag12864b_blit(void) +static void cfag12864b_blit(void) { memcpy(cfag12864b_mem, cfag12864b_buffer, CFAG12864B_SIZE); } @@ -198,7 +198,7 @@ void cfag12864b_blit(void) #define EXAMPLES 6 -void example(unsigned char n) +static void example(unsigned char n) { unsigned short i, j; unsigned char matrix[CFAG12864B_WIDTH * CFAG12864B_HEIGHT]; diff --git a/Documentation/ia64/aliasing-test.c b/Documentation/ia64/aliasing-test.c index d23610fb2ff..3dfb76ca693 100644 --- a/Documentation/ia64/aliasing-test.c +++ b/Documentation/ia64/aliasing-test.c @@ -24,7 +24,7 @@ int sum; -int map_mem(char *path, off_t offset, size_t length, int touch) +static int map_mem(char *path, off_t offset, size_t length, int touch) { int fd, rc; void *addr; @@ -62,7 +62,7 @@ int map_mem(char *path, off_t offset, size_t length, int touch) return 0; } -int scan_tree(char *path, char *file, off_t offset, size_t length, int touch) +static int scan_tree(char *path, char *file, off_t offset, size_t length, int touch) { struct dirent **namelist; char *name, *path2; @@ -119,7 +119,7 @@ skip: char buf[1024]; -int read_rom(char *path) +static int read_rom(char *path) { int fd, rc; size_t size = 0; @@ -146,7 +146,7 @@ int read_rom(char *path) return size; } -int scan_rom(char *path, char *file) +static int scan_rom(char *path, char *file) { struct dirent **namelist; char *name, *path2; diff --git a/Documentation/pcmcia/crc32hash.c b/Documentation/pcmcia/crc32hash.c index 4210e5abab8..44f8beea726 100644 --- a/Documentation/pcmcia/crc32hash.c +++ b/Documentation/pcmcia/crc32hash.c @@ -8,7 +8,7 @@ $ ./crc32hash "Dual Speed" #include #include -unsigned int crc32(unsigned char const *p, unsigned int len) +static unsigned int crc32(unsigned char const *p, unsigned int len) { int i; unsigned int crc = 0; diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c index c1a5aad3c75..10abd3773e4 100644 --- a/Documentation/spi/spidev_test.c +++ b/Documentation/spi/spidev_test.c @@ -69,7 +69,7 @@ static void transfer(int fd) puts(""); } -void print_usage(const char *prog) +static void print_usage(const char *prog) { printf("Usage: %s [-DsbdlHOLC3]\n", prog); puts(" -D --device device to use (default /dev/spidev1.1)\n" @@ -85,7 +85,7 @@ void print_usage(const char *prog) exit(1); } -void parse_opts(int argc, char *argv[]) +static void parse_opts(int argc, char *argv[]) { while (1) { static const struct option lopts[] = { diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c index 05769cff100..c8ded175796 100644 --- a/Documentation/video4linux/v4lgrab.c +++ b/Documentation/video4linux/v4lgrab.c @@ -89,7 +89,7 @@ } \ } -int get_brightness_adj(unsigned char *image, long size, int *brightness) { +static int get_brightness_adj(unsigned char *image, long size, int *brightness) { long i, tot = 0; for (i=0;i> 20; } -void fatal(const char *x, ...) +static void fatal(const char *x, ...) { va_list ap; @@ -178,7 +178,7 @@ void fatal(const char *x, ...) * page flag names */ -char *page_flag_name(uint64_t flags) +static char *page_flag_name(uint64_t flags) { static char buf[65]; int present; @@ -197,7 +197,7 @@ char *page_flag_name(uint64_t flags) return buf; } -char *page_flag_longname(uint64_t flags) +static char *page_flag_longname(uint64_t flags) { static char buf[1024]; int i, n; @@ -221,7 +221,7 @@ char *page_flag_longname(uint64_t flags) * page list and summary */ -void show_page_range(unsigned long offset, uint64_t flags) +static void show_page_range(unsigned long offset, uint64_t flags) { static uint64_t flags0; static unsigned long index; @@ -241,12 +241,12 @@ void show_page_range(unsigned long offset, uint64_t flags) count = 1; } -void show_page(unsigned long offset, uint64_t flags) +static void show_page(unsigned long offset, uint64_t flags) { printf("%lu\t%s\n", offset, page_flag_name(flags)); } -void show_summary(void) +static void show_summary(void) { int i; @@ -272,7 +272,7 @@ void show_summary(void) * page flag filters */ -int bit_mask_ok(uint64_t flags) +static int bit_mask_ok(uint64_t flags) { int i; @@ -289,7 +289,7 @@ int bit_mask_ok(uint64_t flags) return 1; } -uint64_t expand_overloaded_flags(uint64_t flags) +static uint64_t expand_overloaded_flags(uint64_t flags) { /* SLOB/SLUB overload several page flags */ if (flags & BIT(SLAB)) { @@ -308,7 +308,7 @@ uint64_t expand_overloaded_flags(uint64_t flags) return flags; } -uint64_t well_known_flags(uint64_t flags) +static uint64_t well_known_flags(uint64_t flags) { /* hide flags intended only for kernel hacker */ flags &= ~KPF_HACKERS_BITS; @@ -325,7 +325,7 @@ uint64_t well_known_flags(uint64_t flags) * page frame walker */ -int hash_slot(uint64_t flags) +static int hash_slot(uint64_t flags) { int k = HASH_KEY(flags); int i; @@ -352,7 +352,7 @@ int hash_slot(uint64_t flags) exit(EXIT_FAILURE); } -void add_page(unsigned long offset, uint64_t flags) +static void add_page(unsigned long offset, uint64_t flags) { flags = expand_overloaded_flags(flags); @@ -371,7 +371,7 @@ void add_page(unsigned long offset, uint64_t flags) total_pages++; } -void walk_pfn(unsigned long index, unsigned long count) +static void walk_pfn(unsigned long index, unsigned long count) { unsigned long batch; unsigned long n; @@ -404,7 +404,7 @@ void walk_pfn(unsigned long index, unsigned long count) } } -void walk_addr_ranges(void) +static void walk_addr_ranges(void) { int i; @@ -428,7 +428,7 @@ void walk_addr_ranges(void) * user interface */ -const char *page_flag_type(uint64_t flag) +static const char *page_flag_type(uint64_t flag) { if (flag & KPF_HACKERS_BITS) return "(r)"; @@ -437,7 +437,7 @@ const char *page_flag_type(uint64_t flag) return " "; } -void usage(void) +static void usage(void) { int i, j; @@ -482,7 +482,7 @@ void usage(void) "(r) raw mode bits (o) overloaded bits\n"); } -unsigned long long parse_number(const char *str) +static unsigned long long parse_number(const char *str) { unsigned long long n; @@ -494,16 +494,16 @@ unsigned long long parse_number(const char *str) return n; } -void parse_pid(const char *str) +static void parse_pid(const char *str) { opt_pid = parse_number(str); } -void parse_file(const char *name) +static void parse_file(const char *name) { } -void add_addr_range(unsigned long offset, unsigned long size) +static void add_addr_range(unsigned long offset, unsigned long size) { if (nr_addr_ranges >= MAX_ADDR_RANGES) fatal("too much addr ranges\n"); @@ -513,7 +513,7 @@ void add_addr_range(unsigned long offset, unsigned long size) nr_addr_ranges++; } -void parse_addr_range(const char *optarg) +static void parse_addr_range(const char *optarg) { unsigned long offset; unsigned long size; @@ -547,7 +547,7 @@ void parse_addr_range(const char *optarg) add_addr_range(offset, size); } -void add_bits_filter(uint64_t mask, uint64_t bits) +static void add_bits_filter(uint64_t mask, uint64_t bits) { if (nr_bit_filters >= MAX_BIT_FILTERS) fatal("too much bit filters\n"); @@ -557,7 +557,7 @@ void add_bits_filter(uint64_t mask, uint64_t bits) nr_bit_filters++; } -uint64_t parse_flag_name(const char *str, int len) +static uint64_t parse_flag_name(const char *str, int len) { int i; @@ -577,7 +577,7 @@ uint64_t parse_flag_name(const char *str, int len) return parse_number(str); } -uint64_t parse_flag_names(const char *str, int all) +static uint64_t parse_flag_names(const char *str, int all) { const char *p = str; uint64_t flags = 0; @@ -596,7 +596,7 @@ uint64_t parse_flag_names(const char *str, int all) return flags; } -void parse_bits_mask(const char *optarg) +static void parse_bits_mask(const char *optarg) { uint64_t mask; uint64_t bits; @@ -621,7 +621,7 @@ void parse_bits_mask(const char *optarg) } -struct option opts[] = { +static struct option opts[] = { { "raw" , 0, NULL, 'r' }, { "pid" , 1, NULL, 'p' }, { "file" , 1, NULL, 'f' }, diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c index df3227605d5..92e729f4b67 100644 --- a/Documentation/vm/slabinfo.c +++ b/Documentation/vm/slabinfo.c @@ -87,7 +87,7 @@ int page_size; regex_t pattern; -void fatal(const char *x, ...) +static void fatal(const char *x, ...) { va_list ap; @@ -97,7 +97,7 @@ void fatal(const char *x, ...) exit(EXIT_FAILURE); } -void usage(void) +static void usage(void) { printf("slabinfo 5/7/2007. (c) 2007 sgi.\n\n" "slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n" @@ -131,7 +131,7 @@ void usage(void) ); } -unsigned long read_obj(const char *name) +static unsigned long read_obj(const char *name) { FILE *f = fopen(name, "r"); @@ -151,7 +151,7 @@ unsigned long read_obj(const char *name) /* * Get the contents of an attribute */ -unsigned long get_obj(const char *name) +static unsigned long get_obj(const char *name) { if (!read_obj(name)) return 0; @@ -159,7 +159,7 @@ unsigned long get_obj(const char *name) return atol(buffer); } -unsigned long get_obj_and_str(const char *name, char **x) +static unsigned long get_obj_and_str(const char *name, char **x) { unsigned long result = 0; char *p; @@ -178,7 +178,7 @@ unsigned long get_obj_and_str(const char *name, char **x) return result; } -void set_obj(struct slabinfo *s, const char *name, int n) +static void set_obj(struct slabinfo *s, const char *name, int n) { char x[100]; FILE *f; @@ -192,7 +192,7 @@ void set_obj(struct slabinfo *s, const char *name, int n) fclose(f); } -unsigned long read_slab_obj(struct slabinfo *s, const char *name) +static unsigned long read_slab_obj(struct slabinfo *s, const char *name) { char x[100]; FILE *f; @@ -215,7 +215,7 @@ unsigned long read_slab_obj(struct slabinfo *s, const char *name) /* * Put a size string together */ -int store_size(char *buffer, unsigned long value) +static int store_size(char *buffer, unsigned long value) { unsigned long divisor = 1; char trailer = 0; @@ -247,7 +247,7 @@ int store_size(char *buffer, unsigned long value) return n; } -void decode_numa_list(int *numa, char *t) +static void decode_numa_list(int *numa, char *t) { int node; int nr; @@ -272,7 +272,7 @@ void decode_numa_list(int *numa, char *t) } } -void slab_validate(struct slabinfo *s) +static void slab_validate(struct slabinfo *s) { if (strcmp(s->name, "*") == 0) return; @@ -280,7 +280,7 @@ void slab_validate(struct slabinfo *s) set_obj(s, "validate", 1); } -void slab_shrink(struct slabinfo *s) +static void slab_shrink(struct slabinfo *s) { if (strcmp(s->name, "*") == 0) return; @@ -290,7 +290,7 @@ void slab_shrink(struct slabinfo *s) int line = 0; -void first_line(void) +static void first_line(void) { if (show_activity) printf("Name Objects Alloc Free %%Fast Fallb O\n"); @@ -302,7 +302,7 @@ void first_line(void) /* * Find the shortest alias of a slab */ -struct aliasinfo *find_one_alias(struct slabinfo *find) +static struct aliasinfo *find_one_alias(struct slabinfo *find) { struct aliasinfo *a; struct aliasinfo *best = NULL; @@ -318,18 +318,18 @@ struct aliasinfo *find_one_alias(struct slabinfo *find) return best; } -unsigned long slab_size(struct slabinfo *s) +static unsigned long slab_size(struct slabinfo *s) { return s->slabs * (page_size << s->order); } -unsigned long slab_activity(struct slabinfo *s) +static unsigned long slab_activity(struct slabinfo *s) { return s->alloc_fastpath + s->free_fastpath + s->alloc_slowpath + s->free_slowpath; } -void slab_numa(struct slabinfo *s, int mode) +static void slab_numa(struct slabinfo *s, int mode) { int node; @@ -374,7 +374,7 @@ void slab_numa(struct slabinfo *s, int mode) line++; } -void show_tracking(struct slabinfo *s) +static void show_tracking(struct slabinfo *s) { printf("\n%s: Kernel object allocation\n", s->name); printf("-----------------------------------------------------------------------\n"); @@ -392,7 +392,7 @@ void show_tracking(struct slabinfo *s) } -void ops(struct slabinfo *s) +static void ops(struct slabinfo *s) { if (strcmp(s->name, "*") == 0) return; @@ -405,14 +405,14 @@ void ops(struct slabinfo *s) printf("\n%s has no kmem_cache operations\n", s->name); } -const char *onoff(int x) +static const char *onoff(int x) { if (x) return "On "; return "Off"; } -void slab_stats(struct slabinfo *s) +static void slab_stats(struct slabinfo *s) { unsigned long total_alloc; unsigned long total_free; @@ -477,7 +477,7 @@ void slab_stats(struct slabinfo *s) s->deactivate_to_tail, (s->deactivate_to_tail * 100) / total); } -void report(struct slabinfo *s) +static void report(struct slabinfo *s) { if (strcmp(s->name, "*") == 0) return; @@ -518,7 +518,7 @@ void report(struct slabinfo *s) slab_stats(s); } -void slabcache(struct slabinfo *s) +static void slabcache(struct slabinfo *s) { char size_str[20]; char dist_str[40]; @@ -593,7 +593,7 @@ void slabcache(struct slabinfo *s) /* * Analyze debug options. Return false if something is amiss. */ -int debug_opt_scan(char *opt) +static int debug_opt_scan(char *opt) { if (!opt || !opt[0] || strcmp(opt, "-") == 0) return 1; @@ -642,7 +642,7 @@ int debug_opt_scan(char *opt) return 1; } -int slab_empty(struct slabinfo *s) +static int slab_empty(struct slabinfo *s) { if (s->objects > 0) return 0; @@ -657,7 +657,7 @@ int slab_empty(struct slabinfo *s) return 1; } -void slab_debug(struct slabinfo *s) +static void slab_debug(struct slabinfo *s) { if (strcmp(s->name, "*") == 0) return; @@ -717,7 +717,7 @@ void slab_debug(struct slabinfo *s) set_obj(s, "trace", 1); } -void totals(void) +static void totals(void) { struct slabinfo *s; @@ -976,7 +976,7 @@ void totals(void) b1, b2, b3); } -void sort_slabs(void) +static void sort_slabs(void) { struct slabinfo *s1,*s2; @@ -1005,7 +1005,7 @@ void sort_slabs(void) } } -void sort_aliases(void) +static void sort_aliases(void) { struct aliasinfo *a1,*a2; @@ -1030,7 +1030,7 @@ void sort_aliases(void) } } -void link_slabs(void) +static void link_slabs(void) { struct aliasinfo *a; struct slabinfo *s; @@ -1048,7 +1048,7 @@ void link_slabs(void) } } -void alias(void) +static void alias(void) { struct aliasinfo *a; char *active = NULL; @@ -1079,7 +1079,7 @@ void alias(void) } -void rename_slabs(void) +static void rename_slabs(void) { struct slabinfo *s; struct aliasinfo *a; @@ -1102,12 +1102,12 @@ void rename_slabs(void) } } -int slab_mismatch(char *slab) +static int slab_mismatch(char *slab) { return regexec(&pattern, slab, 0, NULL, 0); } -void read_slab_dir(void) +static void read_slab_dir(void) { DIR *dir; struct dirent *de; @@ -1209,7 +1209,7 @@ void read_slab_dir(void) fatal("Too many aliases\n"); } -void output_slabs(void) +static void output_slabs(void) { struct slabinfo *slab; diff --git a/Documentation/watchdog/src/watchdog-test.c b/Documentation/watchdog/src/watchdog-test.c index 65f6c19cb86..a750532ffcf 100644 --- a/Documentation/watchdog/src/watchdog-test.c +++ b/Documentation/watchdog/src/watchdog-test.c @@ -18,7 +18,7 @@ int fd; * the PC Watchdog card to reset its internal timer so it doesn't trigger * a computer reset. */ -void keep_alive(void) +static void keep_alive(void) { int dummy; diff --git a/firmware/ihex2fw.c b/firmware/ihex2fw.c index 8f7fdaa9e01..5a03ba8c836 100644 --- a/firmware/ihex2fw.c +++ b/firmware/ihex2fw.c @@ -56,7 +56,7 @@ static int output_records(int outfd); static int sort_records = 0; static int wide_records = 0; -int usage(void) +static int usage(void) { fprintf(stderr, "ihex2fw: Convert ihex files into binary " "representation for use by Linux kernel\n"); diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c index 3a8297b5184..af6b8363a2d 100644 --- a/scripts/genksyms/genksyms.c +++ b/scripts/genksyms/genksyms.c @@ -176,7 +176,7 @@ static int is_unknown_symbol(struct symbol *sym) strcmp(defn->string, "{") == 0); } -struct symbol *__add_symbol(const char *name, enum symbol_type type, +static struct symbol *__add_symbol(const char *name, enum symbol_type type, struct string_list *defn, int is_extern, int is_reference) { @@ -265,7 +265,7 @@ struct symbol *add_symbol(const char *name, enum symbol_type type, return __add_symbol(name, type, defn, is_extern, 0); } -struct symbol *add_reference_symbol(const char *name, enum symbol_type type, +static struct symbol *add_reference_symbol(const char *name, enum symbol_type type, struct string_list *defn, int is_extern) { return __add_symbol(name, type, defn, is_extern, 1); @@ -313,7 +313,7 @@ static int equal_list(struct string_list *a, struct string_list *b) #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) -struct string_list *read_node(FILE *f) +static struct string_list *read_node(FILE *f) { char buffer[256]; struct string_list node = { -- cgit v1.2.3-70-g09d2 From 50dfe70fe9e216cf356830194630f9a39e498d76 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 22 Sep 2009 16:45:14 -0700 Subject: powerpc: introduce and document sdhci,wp-inverted property for eSDHC eSDHC block in MPC837x SOCs reports inverted write-protect state, soon sdhci-of driver will look for sdhci,wp-inverted properties to decide whether apply a specific quirk. So, document the property and add it to device tree source files. Signed-off-by: Anton Vorontsov Cc: Pierre Ossman Cc: Kumar Gala Cc: David Vrabel Cc: Ben Dooks Cc: Sascha Hauer Cc: Benjamin Herrenschmidt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/powerpc/dts-bindings/fsl/esdhc.txt | 2 ++ arch/powerpc/boot/dts/mpc8377_mds.dts | 1 + arch/powerpc/boot/dts/mpc8377_rdb.dts | 1 + arch/powerpc/boot/dts/mpc8377_wlan.dts | 1 + arch/powerpc/boot/dts/mpc8378_mds.dts | 1 + arch/powerpc/boot/dts/mpc8378_rdb.dts | 1 + arch/powerpc/boot/dts/mpc8379_mds.dts | 1 + arch/powerpc/boot/dts/mpc8379_rdb.dts | 1 + 8 files changed, 9 insertions(+) (limited to 'Documentation') diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt index 3ed3797b508..8a004073896 100644 --- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt +++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt @@ -10,6 +10,8 @@ Required properties: - interrupts : should contain eSDHC interrupt. - interrupt-parent : interrupt source phandle. - clock-frequency : specifies eSDHC base clock frequency. + - sdhci,wp-inverted : (optional) specifies that eSDHC controller + reports inverted write-protect state; - sdhci,1-bit-only : (optional) specifies that a controller can only handle 1-bit data transfers. diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index f32c2811c6d..855782c5e5e 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -159,6 +159,7 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ clock-frequency = <0>; }; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 28e022ac417..9e2264b1000 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -173,6 +173,7 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ clock-frequency = <111111111>; }; diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts index 3febc4e91b1..9a603695723 100644 --- a/arch/powerpc/boot/dts/mpc8377_wlan.dts +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -150,6 +150,7 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; clock-frequency = <133333333>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index f720ab9af30..f70cf600083 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -159,6 +159,7 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ clock-frequency = <0>; }; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index a11ead8214b..4e6a1a407bb 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -173,6 +173,7 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ clock-frequency = <111111111>; }; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 4fa221fd9bd..645ec51cc6e 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -157,6 +157,7 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ clock-frequency = <0>; }; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index e35dfba587c..72336d50452 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -171,6 +171,7 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ clock-frequency = <111111111>; }; -- cgit v1.2.3-70-g09d2 From d899bf7b55f503ba7d3d07ed27c3a37e270fa7db Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Tue, 22 Sep 2009 16:45:40 -0700 Subject: procfs: provide stack information for threads A patch to give a better overview of the userland application stack usage, especially for embedded linux. Currently you are only able to dump the main process/thread stack usage which is showed in /proc/pid/status by the "VmStk" Value. But you get no information about the consumed stack memory of the the threads. There is an enhancement in the /proc//{task/*,}/*maps and which marks the vm mapping where the thread stack pointer reside with "[thread stack xxxxxxxx]". xxxxxxxx is the maximum size of stack. This is a value information, because libpthread doesn't set the start of the stack to the top of the mapped area, depending of the pthread usage. A sample output of /proc//task//maps looks like: 08048000-08049000 r-xp 00000000 03:00 8312 /opt/z 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/z 0804a000-0806b000 rw-p 00000000 00:00 0 [heap] a7d12000-a7d13000 ---p 00000000 00:00 0 a7d13000-a7f13000 rw-p 00000000 00:00 0 [thread stack: 001ff4b4] a7f13000-a7f14000 ---p 00000000 00:00 0 a7f14000-a7f36000 rw-p 00000000 00:00 0 a7f36000-a8069000 r-xp 00000000 03:00 4222 /lib/libc.so.6 a8069000-a806b000 r--p 00133000 03:00 4222 /lib/libc.so.6 a806b000-a806c000 rw-p 00135000 03:00 4222 /lib/libc.so.6 a806c000-a806f000 rw-p 00000000 00:00 0 a806f000-a8083000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0 a8083000-a8084000 r--p 00013000 03:00 14462 /lib/libpthread.so.0 a8084000-a8085000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0 a8085000-a8088000 rw-p 00000000 00:00 0 a8088000-a80a4000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2 a80a4000-a80a5000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2 a80a5000-a80a6000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2 afaf5000-afb0a000 rw-p 00000000 00:00 0 [stack] ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso] Also there is a new entry "stack usage" in /proc//{task/*,}/status which will you give the current stack usage in kb. A sample output of /proc/self/status looks like: Name: cat State: R (running) Tgid: 507 Pid: 507 . . . CapBnd: fffffffffffffeff voluntary_ctxt_switches: 0 nonvoluntary_ctxt_switches: 0 Stack usage: 12 kB I also fixed stack base address in /proc//{task/*,}/stat to the base address of the associated thread stack and not the one of the main process. This makes more sense. [akpm@linux-foundation.org: fs/proc/array.c now needs walk_page_range()] Signed-off-by: Stefani Seibold Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Alexey Dobriyan Cc: "Eric W. Biederman" Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 5 ++- fs/exec.c | 2 + fs/proc/array.c | 85 +++++++++++++++++++++++++++++++++++++- fs/proc/task_mmu.c | 19 +++++++++ include/linux/sched.h | 1 + kernel/fork.c | 2 + mm/Makefile | 4 +- 7 files changed, 114 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 75988ba26a5..b5aee7838a0 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -176,6 +176,7 @@ read the file /proc/PID/status: CapBnd: ffffffffffffffff voluntary_ctxt_switches: 0 nonvoluntary_ctxt_switches: 1 + Stack usage: 12 kB This shows you nearly the same information you would get if you viewed it with the ps command. In fact, ps uses the proc file system to obtain its @@ -229,6 +230,7 @@ Table 1-2: Contents of the statm files (as of 2.6.30-rc7) Mems_allowed_list Same as previous, but in "list format" voluntary_ctxt_switches number of voluntary context switches nonvoluntary_ctxt_switches number of non voluntary context switches + Stack usage: stack usage high water mark (round up to page size) .............................................................................. Table 1-3: Contents of the statm files (as of 2.6.8-rc3) @@ -307,7 +309,7 @@ address perms offset dev inode pathname 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test 0804a000-0806b000 rw-p 00000000 00:00 0 [heap] a7cb1000-a7cb2000 ---p 00000000 00:00 0 -a7cb2000-a7eb2000 rw-p 00000000 00:00 0 +a7cb2000-a7eb2000 rw-p 00000000 00:00 0 [threadstack:001ff4b4] a7eb2000-a7eb3000 ---p 00000000 00:00 0 a7eb3000-a7ed5000 rw-p 00000000 00:00 0 a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6 @@ -343,6 +345,7 @@ is not associated with a file: [stack] = the stack of the main process [vdso] = the "virtual dynamic shared object", the kernel system call handler + [threadstack:xxxxxxxx] = the stack of the thread, xxxxxxxx is the stack size or if empty, the mapping is anonymous. diff --git a/fs/exec.c b/fs/exec.c index 69bb9d89979..5c833c18d0d 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1357,6 +1357,8 @@ int do_execve(char * filename, if (retval < 0) goto out; + current->stack_start = current->mm->start_stack; + /* execve succeeded */ current->fs->in_exec = 0; current->in_execve = 0; diff --git a/fs/proc/array.c b/fs/proc/array.c index 725a650bbbb..0c6bc602e6c 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -82,6 +82,7 @@ #include #include #include +#include #include #include @@ -321,6 +322,87 @@ static inline void task_context_switch_counts(struct seq_file *m, p->nivcsw); } +struct stack_stats { + struct vm_area_struct *vma; + unsigned long startpage; + unsigned long usage; +}; + +static int stack_usage_pte_range(pmd_t *pmd, unsigned long addr, + unsigned long end, struct mm_walk *walk) +{ + struct stack_stats *ss = walk->private; + struct vm_area_struct *vma = ss->vma; + pte_t *pte, ptent; + spinlock_t *ptl; + int ret = 0; + + pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl); + for (; addr != end; pte++, addr += PAGE_SIZE) { + ptent = *pte; + +#ifdef CONFIG_STACK_GROWSUP + if (pte_present(ptent) || is_swap_pte(ptent)) + ss->usage = addr - ss->startpage + PAGE_SIZE; +#else + if (pte_present(ptent) || is_swap_pte(ptent)) { + ss->usage = ss->startpage - addr + PAGE_SIZE; + pte++; + ret = 1; + break; + } +#endif + } + pte_unmap_unlock(pte - 1, ptl); + cond_resched(); + return ret; +} + +static inline unsigned long get_stack_usage_in_bytes(struct vm_area_struct *vma, + struct task_struct *task) +{ + struct stack_stats ss; + struct mm_walk stack_walk = { + .pmd_entry = stack_usage_pte_range, + .mm = vma->vm_mm, + .private = &ss, + }; + + if (!vma->vm_mm || is_vm_hugetlb_page(vma)) + return 0; + + ss.vma = vma; + ss.startpage = task->stack_start & PAGE_MASK; + ss.usage = 0; + +#ifdef CONFIG_STACK_GROWSUP + walk_page_range(KSTK_ESP(task) & PAGE_MASK, vma->vm_end, + &stack_walk); +#else + walk_page_range(vma->vm_start, (KSTK_ESP(task) & PAGE_MASK) + PAGE_SIZE, + &stack_walk); +#endif + return ss.usage; +} + +static inline void task_show_stack_usage(struct seq_file *m, + struct task_struct *task) +{ + struct vm_area_struct *vma; + struct mm_struct *mm = get_task_mm(task); + + if (mm) { + down_read(&mm->mmap_sem); + vma = find_vma(mm, task->stack_start); + if (vma) + seq_printf(m, "Stack usage:\t%lu kB\n", + get_stack_usage_in_bytes(vma, task) >> 10); + + up_read(&mm->mmap_sem); + mmput(mm); + } +} + int proc_pid_status(struct seq_file *m, struct pid_namespace *ns, struct pid *pid, struct task_struct *task) { @@ -340,6 +422,7 @@ int proc_pid_status(struct seq_file *m, struct pid_namespace *ns, task_show_regs(m, task); #endif task_context_switch_counts(m, task); + task_show_stack_usage(m, task); return 0; } @@ -481,7 +564,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, rsslim, mm ? mm->start_code : 0, mm ? mm->end_code : 0, - (permitted && mm) ? mm->start_stack : 0, + (permitted) ? task->stack_start : 0, esp, eip, /* The signal information here is obsolete. diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 366b1017a4f..2a1bef9203c 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -243,6 +243,25 @@ static void show_map_vma(struct seq_file *m, struct vm_area_struct *vma) } else if (vma->vm_start <= mm->start_stack && vma->vm_end >= mm->start_stack) { name = "[stack]"; + } else { + unsigned long stack_start; + struct proc_maps_private *pmp; + + pmp = m->private; + stack_start = pmp->task->stack_start; + + if (vma->vm_start <= stack_start && + vma->vm_end >= stack_start) { + pad_len_spaces(m, len); + seq_printf(m, + "[threadstack:%08lx]", +#ifdef CONFIG_STACK_GROWSUP + vma->vm_end - stack_start +#else + stack_start - vma->vm_start +#endif + ); + } } } else { name = "[vdso]"; diff --git a/include/linux/sched.h b/include/linux/sched.h index 6448bbc6406..3cbc6c0be66 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1529,6 +1529,7 @@ struct task_struct { /* bitmask of trace recursion */ unsigned long trace_recursion; #endif /* CONFIG_TRACING */ + unsigned long stack_start; }; /* Future-safe accessor for struct task_struct's cpus_allowed. */ diff --git a/kernel/fork.c b/kernel/fork.c index 7cf45812ce8..8f45b0ebdda 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1095,6 +1095,8 @@ static struct task_struct *copy_process(unsigned long clone_flags, p->bts = NULL; + p->stack_start = stack_start; + /* Perform scheduler related setup. Assign this task to a CPU. */ sched_fork(p, clone_flags); diff --git a/mm/Makefile b/mm/Makefile index 728a9fde49d..88193d73cd1 100644 --- a/mm/Makefile +++ b/mm/Makefile @@ -11,10 +11,10 @@ obj-y := bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \ maccess.o page_alloc.o page-writeback.o \ readahead.o swap.o truncate.o vmscan.o shmem.o \ prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \ - page_isolation.o mm_init.o mmu_context.o $(mmu-y) + page_isolation.o mm_init.o mmu_context.o \ + pagewalk.o $(mmu-y) obj-y += init-mm.o -obj-$(CONFIG_PROC_PAGE_MONITOR) += pagewalk.o obj-$(CONFIG_BOUNCE) += bounce.o obj-$(CONFIG_SWAP) += page_io.o swap_state.o swapfile.o thrash.o obj-$(CONFIG_HAS_DMA) += dmapool.o -- cgit v1.2.3-70-g09d2 From 1b83df308f69a5a3cc59be03bd7fb23e4bcebd8e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 22 Sep 2009 16:45:54 -0700 Subject: ncpfs: remove dead URL from documentation Noticed-by: Joe Perches Cc: Petr Vandrovec Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/ncpfs.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/ncpfs.txt b/Documentation/filesystems/ncpfs.txt index f12c30c93f2..5af164f4b37 100644 --- a/Documentation/filesystems/ncpfs.txt +++ b/Documentation/filesystems/ncpfs.txt @@ -7,6 +7,6 @@ ftp.gwdg.de/pub/linux/misc/ncpfs, but sunsite and its many mirrors will have it as well. Related products are linware and mars_nwe, which will give Linux partial -NetWare server functionality. Linware's home site is -klokan.sh.cvut.cz/pub/linux/linware; mars_nwe can be found on -ftp.gwdg.de/pub/linux/misc/ncpfs. +NetWare server functionality. + +mars_nwe can be found on ftp.gwdg.de/pub/linux/misc/ncpfs. -- cgit v1.2.3-70-g09d2 From 9ed7ef526ade622cdc22ac365a95197ddd1e09fb Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 22 Sep 2009 16:46:11 -0700 Subject: spi: fix spelling of `automatically' in documentation Fix spelling of `automatically' in Documentation/spi/spi-summary. Signed-off-by: Ben Dooks Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/spi/spi-summary | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 4a02d2508bc..deab51ddc33 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -350,7 +350,7 @@ SPI protocol drivers somewhat resemble platform device drivers: .resume = CHIP_resume, }; -The driver core will autmatically attempt to bind this driver to any SPI +The driver core will automatically attempt to bind this driver to any SPI device whose board_info gave a modalias of "CHIP". Your probe() code might look like this unless you're creating a device which is managing a bus (appearing under /sys/class/spi_master). -- cgit v1.2.3-70-g09d2 From ad91fd854f08d1795b58addc09752de3351644f3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 22 Sep 2009 16:46:24 -0700 Subject: rtc: update documentation wrt RTC_PIE/irq_set_state Signed-off-by: Mike Frysinger Cc: David Brownell Signed-off-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/rtc.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/rtc.txt b/Documentation/rtc.txt index 8deffcd68cb..102ce9625e6 100644 --- a/Documentation/rtc.txt +++ b/Documentation/rtc.txt @@ -185,6 +185,8 @@ driver returns ENOIOCTLCMD. Some common examples: hardware in the irq_set_freq function. If it isn't, return -EINVAL. If you cannot actually change the frequency, do not define irq_set_freq. + * RTC_PIE_ON, RTC_PIE_OFF: the irq_set_state function will be called. + If all else fails, check out the rtc-test.c driver! -- cgit v1.2.3-70-g09d2 From ea3d1606fd32059461309099e8856c6652888a79 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 22 Sep 2009 16:46:31 -0700 Subject: rtc: document the sysfs interface The sysfs interface to the RTC class drivers is currently undocumented. Add some basic documentation defining the semantics of the fields. Signed-off-by: Matthew Garrett Cc: Mark Brown Acked-by: Alessandro Zummo Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/rtc.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'Documentation') diff --git a/Documentation/rtc.txt b/Documentation/rtc.txt index 102ce9625e6..2745e8197fd 100644 --- a/Documentation/rtc.txt +++ b/Documentation/rtc.txt @@ -135,6 +135,28 @@ a high functionality RTC is integrated into the SOC. That system might read the system clock from the discrete RTC, but use the integrated one for all other tasks, because of its greater functionality. +SYSFS INTERFACE +--------------- + +The sysfs interface under /sys/class/rtc/rtcN provides access to various +rtc attributes without requiring the use of ioctls. All dates and times +are in the RTC's timezone, rather than in system time. + +date: RTC-provided date +max_user_freq: The maximum interrupt rate an unprivileged user may request + from this RTC. +name: The name of the RTC corresponding to this sysfs directory +since_epoch: The number of seconds since the epoch according to the RTC +time: RTC-provided time +wakealarm: The time at which the clock will generate a system wakeup + event. This is a one shot wakeup event, so must be reset + after wake if a daily wakeup is required. Format is either + seconds since the epoch or, if there's a leading +, seconds + in the future. + +IOCTL INTERFACE +--------------- + The ioctl() calls supported by /dev/rtc are also supported by the RTC class framework. However, because the chips and systems are not standardized, some PC/AT functionality might not be provided. And in the same way, some -- cgit v1.2.3-70-g09d2 From d8c1acb1664d17dd995e34507533321e986d9215 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 22 Sep 2009 16:46:32 -0700 Subject: rtc: add boot_timesource sysfs attribute CONFIG_RTC_HCTOSYS allows the kernel to read the system time from the RTC at boot and resume, avoiding the need for userspace to do so. Unfortunately userspace currently has no way to know whether this configuration option is enabled and thus cannot sensibly choose whether to run hwclock itself or not. Add a hctosys sysfs attribute which indicates whether a given RTC set the system clock. Signed-off-by: Matthew Garrett Acked-by: Alessandro Zummo Cc: Mark Brown Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/rtc.txt | 2 ++ drivers/rtc/rtc-sysfs.c | 14 ++++++++++++++ 2 files changed, 16 insertions(+) (limited to 'Documentation') diff --git a/Documentation/rtc.txt b/Documentation/rtc.txt index 2745e8197fd..9104c106208 100644 --- a/Documentation/rtc.txt +++ b/Documentation/rtc.txt @@ -143,6 +143,8 @@ rtc attributes without requiring the use of ioctls. All dates and times are in the RTC's timezone, rather than in system time. date: RTC-provided date +hctosys: 1 if the RTC provided the system time at boot via the + CONFIG_RTC_HCTOSYS kernel option, 0 otherwise max_user_freq: The maximum interrupt rate an unprivileged user may request from this RTC. name: The name of the RTC corresponding to this sysfs directory diff --git a/drivers/rtc/rtc-sysfs.c b/drivers/rtc/rtc-sysfs.c index 2531ce4c9db..7dd23a6fc82 100644 --- a/drivers/rtc/rtc-sysfs.c +++ b/drivers/rtc/rtc-sysfs.c @@ -102,6 +102,19 @@ rtc_sysfs_set_max_user_freq(struct device *dev, struct device_attribute *attr, return n; } +static ssize_t +rtc_sysfs_show_hctosys(struct device *dev, struct device_attribute *attr, + char *buf) +{ +#ifdef CONFIG_RTC_HCTOSYS_DEVICE + if (strcmp(dev_name(&to_rtc_device(dev)->dev), + CONFIG_RTC_HCTOSYS_DEVICE) == 0) + return sprintf(buf, "1\n"); + else +#endif + return sprintf(buf, "0\n"); +} + static struct device_attribute rtc_attrs[] = { __ATTR(name, S_IRUGO, rtc_sysfs_show_name, NULL), __ATTR(date, S_IRUGO, rtc_sysfs_show_date, NULL), @@ -109,6 +122,7 @@ static struct device_attribute rtc_attrs[] = { __ATTR(since_epoch, S_IRUGO, rtc_sysfs_show_since_epoch, NULL), __ATTR(max_user_freq, S_IRUGO | S_IWUSR, rtc_sysfs_show_max_user_freq, rtc_sysfs_set_max_user_freq), + __ATTR(hctosys, S_IRUGO, rtc_sysfs_show_hctosys, NULL), { }, }; -- cgit v1.2.3-70-g09d2 From a4177ee7f1a83eecb1d75e85d32664b023ef65e9 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 22 Sep 2009 16:46:33 -0700 Subject: gpiolib: allow exported GPIO nodes to be named using sysfs links Commit 926b663ce8215ba448960e1ff6e58b67a2c3b99b (gpiolib: allow GPIOs to be named) already provides naming on the chip level. This patch provides more flexibility by allowing multiple names where ever in sysfs on a per GPIO basis. Adapted from David Brownell's comments on a similar concept: http://lkml.org/lkml/2009/4/20/203. [randy.dunlap@oracle.com: fix build for CONFIG_GENERIC_GPIO=n] Signed-off-by: Jani Nikula Acked-by: David Brownell Cc: Daniel Silverstone Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/gpio.txt | 10 ++++++++++ drivers/gpio/gpiolib.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ include/asm-generic/gpio.h | 8 ++++++++ include/linux/gpio.h | 11 +++++++++++ 4 files changed, 74 insertions(+) (limited to 'Documentation') diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index e4b6985044a..566edaa56a5 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -555,6 +555,11 @@ requested using gpio_request(): /* reverse gpio_export() */ void gpio_unexport(); + /* create a sysfs link to an exported GPIO node */ + int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) + + After a kernel driver requests a GPIO, it may only be made available in the sysfs interface by gpio_export(). The driver can control whether the signal direction may change. This helps drivers prevent userspace code @@ -563,3 +568,8 @@ from accidentally clobbering important system state. This explicit exporting can help with debugging (by making some kinds of experiments easier), or can provide an always-there interface that's suitable for documenting as part of a board support package. + +After the GPIO has been exported, gpio_export_link() allows creating +symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can +use this to provide the interface under their own device in sysfs with +a descriptive name. diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 51a8d4103be..aef6b3d8e2c 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -504,6 +504,51 @@ static int match_export(struct device *dev, void *data) return dev_get_drvdata(dev) == data; } +/** + * gpio_export_link - create a sysfs link to an exported GPIO node + * @dev: device under which to create symlink + * @name: name of the symlink + * @gpio: gpio to create symlink to, already exported + * + * Set up a symlink from /sys/.../dev/name to /sys/class/gpio/gpioN + * node. Caller is responsible for unlinking. + * + * Returns zero on success, else an error. + */ +int gpio_export_link(struct device *dev, const char *name, unsigned gpio) +{ + struct gpio_desc *desc; + int status = -EINVAL; + + if (!gpio_is_valid(gpio)) + goto done; + + mutex_lock(&sysfs_lock); + + desc = &gpio_desc[gpio]; + + if (test_bit(FLAG_EXPORT, &desc->flags)) { + struct device *tdev; + + tdev = class_find_device(&gpio_class, NULL, desc, match_export); + if (tdev != NULL) { + status = sysfs_create_link(&dev->kobj, &tdev->kobj, + name); + } else { + status = -ENODEV; + } + } + + mutex_unlock(&sysfs_lock); + +done: + if (status) + pr_debug("%s: gpio%d status %d\n", __func__, gpio, status); + + return status; +} +EXPORT_SYMBOL_GPL(gpio_export_link); + /** * gpio_unexport - reverse effect of gpio_export() * @gpio: gpio to make unavailable diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index d6c379dc64f..9cca3785cab 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -141,6 +141,8 @@ extern int __gpio_to_irq(unsigned gpio); * but more typically is configured entirely from userspace. */ extern int gpio_export(unsigned gpio, bool direction_may_change); +extern int gpio_export_link(struct device *dev, const char *name, + unsigned gpio); extern void gpio_unexport(unsigned gpio); #endif /* CONFIG_GPIO_SYSFS */ @@ -185,6 +187,12 @@ static inline int gpio_export(unsigned gpio, bool direction_may_change) return -ENOSYS; } +static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) +{ + return -ENOSYS; +} + static inline void gpio_unexport(unsigned gpio) { } diff --git a/include/linux/gpio.h b/include/linux/gpio.h index e10c49a5b96..059bd189d35 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -12,6 +12,8 @@ #include #include +struct device; + /* * Some platforms don't support the GPIO programming interface. * @@ -89,6 +91,15 @@ static inline int gpio_export(unsigned gpio, bool direction_may_change) return -EINVAL; } +static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) +{ + /* GPIO can never have been exported */ + WARN_ON(1); + return -EINVAL; +} + + static inline void gpio_unexport(unsigned gpio) { /* GPIO can never have been exported */ -- cgit v1.2.3-70-g09d2 From ff77c352ae17768c61cfc36357f0a3904552f11c Mon Sep 17 00:00:00 2001 From: Daniel Glöckner Date: Tue, 22 Sep 2009 16:46:38 -0700 Subject: gpiolib: allow poll() on value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Many gpio chips allow to generate interrupts when the value of a pin changes. This patch gives usermode application the opportunity to make use of this feature by calling poll(2) on the /sys/class/gpio/gpioN/value sysfs file. The edge to trigger can be set in the edge file in the same directory. Possible values are "none", "rising", "falling", and "both". Using level triggers is not possible with current sysfs since nothing changes the GPIO value (and the IRQ keeps triggering). Edge triggering will "just work". Note that if there was an event between read() and poll(), the poll() returns immediately. Also note that this version only supports true GPIO interrupts. Some later patch might be able to synthesize this behavior by timer-driven polling; some systems seem to need that. [dbrownell@users.sourceforge.net: align ids to 16 bit ids; whitespace] Signed-off-by: Daniel Glöckner Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-gpio | 1 + Documentation/gpio.txt | 7 ++ drivers/gpio/gpiolib.c | 208 ++++++++++++++++++++++++++++++++++- 3 files changed, 211 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-gpio b/Documentation/ABI/testing/sysfs-gpio index 8aab8092ad3..80f4c94c7be 100644 --- a/Documentation/ABI/testing/sysfs-gpio +++ b/Documentation/ABI/testing/sysfs-gpio @@ -19,6 +19,7 @@ Description: /gpioN ... for each exported GPIO #N /value ... always readable, writes fail for input GPIOs /direction ... r/w as: in, out (default low); write: high, low + /edge ... r/w as: none, falling, rising, both /gpiochipN ... for each gpiochip; #N is its first GPIO /base ... (r/o) same as N /label ... (r/o) descriptive, not necessarily unique diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index 566edaa56a5..fa4dc077ae0 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -524,6 +524,13 @@ and have the following read/write attributes: is configured as an output, this value may be written; any nonzero value is treated as high. + "edge" ... reads as either "none", "rising", "falling", or + "both". Write these strings to select the signal edge(s) + that will make poll(2) on the "value" file return. + + This file exists only if the pin can be configured as an + interrupt generating input pin. + GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the controller implementing GPIOs starting at #42) and have the following read-only attributes: diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index aef6b3d8e2c..bb11a429394 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1,5 +1,6 @@ #include #include +#include #include #include #include @@ -7,6 +8,7 @@ #include #include #include +#include /* Optional implementation infrastructure for GPIO interfaces. @@ -49,6 +51,13 @@ struct gpio_desc { #define FLAG_RESERVED 2 #define FLAG_EXPORT 3 /* protected by sysfs_lock */ #define FLAG_SYSFS 4 /* exported via /sys/class/gpio/control */ +#define FLAG_TRIG_FALL 5 /* trigger on falling edge */ +#define FLAG_TRIG_RISE 6 /* trigger on rising edge */ + +#define PDESC_ID_SHIFT 16 /* add new flags before this one */ + +#define GPIO_FLAGS_MASK ((1 << PDESC_ID_SHIFT) - 1) +#define GPIO_TRIGGER_MASK (BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE)) #ifdef CONFIG_DEBUG_FS const char *label; @@ -56,6 +65,15 @@ struct gpio_desc { }; static struct gpio_desc gpio_desc[ARCH_NR_GPIOS]; +#ifdef CONFIG_GPIO_SYSFS +struct poll_desc { + struct work_struct work; + struct sysfs_dirent *value_sd; +}; + +static struct idr pdesc_idr; +#endif + static inline void desc_set_label(struct gpio_desc *d, const char *label) { #ifdef CONFIG_DEBUG_FS @@ -188,10 +206,10 @@ static DEFINE_MUTEX(sysfs_lock); * /value * * always readable, subject to hardware behavior * * may be writable, as zero/nonzero - * - * REVISIT there will likely be an attribute for configuring async - * notifications, e.g. to specify polling interval or IRQ trigger type - * that would for example trigger a poll() on the "value". + * /edge + * * configures behavior of poll(2) on /value + * * available only if pin can generate IRQs on input + * * is read/write as "none", "falling", "rising", or "both" */ static ssize_t gpio_direction_show(struct device *dev, @@ -288,6 +306,175 @@ static ssize_t gpio_value_store(struct device *dev, static /*const*/ DEVICE_ATTR(value, 0644, gpio_value_show, gpio_value_store); +static irqreturn_t gpio_sysfs_irq(int irq, void *priv) +{ + struct work_struct *work = priv; + + schedule_work(work); + return IRQ_HANDLED; +} + +static void gpio_notify_sysfs(struct work_struct *work) +{ + struct poll_desc *pdesc; + + pdesc = container_of(work, struct poll_desc, work); + sysfs_notify_dirent(pdesc->value_sd); +} + +static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev, + unsigned long gpio_flags) +{ + struct poll_desc *pdesc; + unsigned long irq_flags; + int ret, irq, id; + + if ((desc->flags & GPIO_TRIGGER_MASK) == gpio_flags) + return 0; + + irq = gpio_to_irq(desc - gpio_desc); + if (irq < 0) + return -EIO; + + id = desc->flags >> PDESC_ID_SHIFT; + pdesc = idr_find(&pdesc_idr, id); + if (pdesc) { + free_irq(irq, &pdesc->work); + cancel_work_sync(&pdesc->work); + } + + desc->flags &= ~GPIO_TRIGGER_MASK; + + if (!gpio_flags) { + ret = 0; + goto free_sd; + } + + irq_flags = IRQF_SHARED; + if (test_bit(FLAG_TRIG_FALL, &gpio_flags)) + irq_flags |= IRQF_TRIGGER_FALLING; + if (test_bit(FLAG_TRIG_RISE, &gpio_flags)) + irq_flags |= IRQF_TRIGGER_RISING; + + if (!pdesc) { + pdesc = kmalloc(sizeof(*pdesc), GFP_KERNEL); + if (!pdesc) { + ret = -ENOMEM; + goto err_out; + } + + do { + ret = -ENOMEM; + if (idr_pre_get(&pdesc_idr, GFP_KERNEL)) + ret = idr_get_new_above(&pdesc_idr, + pdesc, 1, &id); + } while (ret == -EAGAIN); + + if (ret) + goto free_mem; + + desc->flags &= GPIO_FLAGS_MASK; + desc->flags |= (unsigned long)id << PDESC_ID_SHIFT; + + if (desc->flags >> PDESC_ID_SHIFT != id) { + ret = -ERANGE; + goto free_id; + } + + pdesc->value_sd = sysfs_get_dirent(dev->kobj.sd, "value"); + if (!pdesc->value_sd) { + ret = -ENODEV; + goto free_id; + } + INIT_WORK(&pdesc->work, gpio_notify_sysfs); + } + + ret = request_irq(irq, gpio_sysfs_irq, irq_flags, + "gpiolib", &pdesc->work); + if (ret) + goto free_sd; + + desc->flags |= gpio_flags; + return 0; + +free_sd: + sysfs_put(pdesc->value_sd); +free_id: + idr_remove(&pdesc_idr, id); + desc->flags &= GPIO_FLAGS_MASK; +free_mem: + kfree(pdesc); +err_out: + return ret; +} + +static const struct { + const char *name; + unsigned long flags; +} trigger_types[] = { + { "none", 0 }, + { "falling", BIT(FLAG_TRIG_FALL) }, + { "rising", BIT(FLAG_TRIG_RISE) }, + { "both", BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE) }, +}; + +static ssize_t gpio_edge_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const struct gpio_desc *desc = dev_get_drvdata(dev); + ssize_t status; + + mutex_lock(&sysfs_lock); + + if (!test_bit(FLAG_EXPORT, &desc->flags)) + status = -EIO; + else { + int i; + + status = 0; + for (i = 0; i < ARRAY_SIZE(trigger_types); i++) + if ((desc->flags & GPIO_TRIGGER_MASK) + == trigger_types[i].flags) { + status = sprintf(buf, "%s\n", + trigger_types[i].name); + break; + } + } + + mutex_unlock(&sysfs_lock); + return status; +} + +static ssize_t gpio_edge_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct gpio_desc *desc = dev_get_drvdata(dev); + ssize_t status; + int i; + + for (i = 0; i < ARRAY_SIZE(trigger_types); i++) + if (sysfs_streq(trigger_types[i].name, buf)) + goto found; + return -EINVAL; + +found: + mutex_lock(&sysfs_lock); + + if (!test_bit(FLAG_EXPORT, &desc->flags)) + status = -EIO; + else { + status = gpio_setup_irq(desc, dev, trigger_types[i].flags); + if (!status) + status = size; + } + + mutex_unlock(&sysfs_lock); + + return status; +} + +static DEVICE_ATTR(edge, 0644, gpio_edge_show, gpio_edge_store); + static const struct attribute *gpio_attrs[] = { &dev_attr_direction.attr, &dev_attr_value.attr, @@ -473,7 +660,7 @@ int gpio_export(unsigned gpio, bool direction_may_change) struct device *dev; dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0), - desc, ioname ? ioname : "gpio%d", gpio); + desc, ioname ? ioname : "gpio%d", gpio); if (dev) { if (direction_may_change) status = sysfs_create_group(&dev->kobj, @@ -481,6 +668,14 @@ int gpio_export(unsigned gpio, bool direction_may_change) else status = device_create_file(dev, &dev_attr_value); + + if (!status && gpio_to_irq(gpio) >= 0 + && (direction_may_change + || !test_bit(FLAG_IS_OUT, + &desc->flags))) + status = device_create_file(dev, + &dev_attr_edge); + if (status != 0) device_unregister(dev); } else @@ -572,6 +767,7 @@ void gpio_unexport(unsigned gpio) dev = class_find_device(&gpio_class, NULL, desc, match_export); if (dev) { + gpio_setup_irq(desc, dev, 0); clear_bit(FLAG_EXPORT, &desc->flags); put_device(dev); device_unregister(dev); @@ -656,6 +852,8 @@ static int __init gpiolib_sysfs_init(void) unsigned long flags; unsigned gpio; + idr_init(&pdesc_idr); + status = class_register(&gpio_class); if (status < 0) return status; -- cgit v1.2.3-70-g09d2 From 88017bda96a5fd568a982b01546c8fb1782dda62 Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Tue, 22 Sep 2009 16:47:09 -0700 Subject: ep93xx video driver EP93xx video driver plus documentation. Signed-off-by: Ryan Mallon Acked-by: H Hartley Sweeten Cc: Daniele Venzano Cc: Russell King Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/fb/ep93xx-fb.txt | 135 +++++++++ drivers/video/Kconfig | 11 + drivers/video/Makefile | 1 + drivers/video/ep93xx-fb.c | 646 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 793 insertions(+) create mode 100644 Documentation/fb/ep93xx-fb.txt create mode 100644 drivers/video/ep93xx-fb.c (limited to 'Documentation') diff --git a/Documentation/fb/ep93xx-fb.txt b/Documentation/fb/ep93xx-fb.txt new file mode 100644 index 00000000000..5af1bd9effa --- /dev/null +++ b/Documentation/fb/ep93xx-fb.txt @@ -0,0 +1,135 @@ +================================ +Driver for EP93xx LCD controller +================================ + +The EP93xx LCD controller can drive both standard desktop monitors and +embedded LCD displays. If you have a standard desktop monitor then you +can use the standard Linux video mode database. In your board file: + + static struct ep93xxfb_mach_info some_board_fb_info = { + .num_modes = EP93XXFB_USE_MODEDB, + .bpp = 16, + }; + +If you have an embedded LCD display then you need to define a video +mode for it as follows: + + static struct fb_videomode some_board_video_modes[] = { + { + .name = "some_lcd_name", + /* Pixel clock, porches, etc */ + }, + }; + +Note that the pixel clock value is in pico-seconds. You can use the +KHZ2PICOS macro to convert the pixel clock value. Most other values +are in pixel clocks. See Documentation/fb/framebuffer.txt for further +details. + +The ep93xxfb_mach_info structure for your board should look like the +following: + + static struct ep93xxfb_mach_info some_board_fb_info = { + .num_modes = ARRAY_SIZE(some_board_video_modes), + .modes = some_board_video_modes, + .default_mode = &some_board_video_modes[0], + .bpp = 16, + }; + +The framebuffer device can be registered by adding the following to +your board initialisation function: + + ep93xx_register_fb(&some_board_fb_info); + +===================== +Video Attribute Flags +===================== + +The ep93xxfb_mach_info structure has a flags field which can be used +to configure the controller. The video attributes flags are fully +documented in section 7 of the EP93xx users' guide. The following +flags are available: + +EP93XXFB_PCLK_FALLING Clock data on the falling edge of the + pixel clock. The default is to clock + data on the rising edge. + +EP93XXFB_SYNC_BLANK_HIGH Blank signal is active high. By + default the blank signal is active low. + +EP93XXFB_SYNC_HORIZ_HIGH Horizontal sync is active high. By + default the horizontal sync is active low. + +EP93XXFB_SYNC_VERT_HIGH Vertical sync is active high. By + default the vertical sync is active high. + +The physical address of the framebuffer can be controlled using the +following flags: + +EP93XXFB_USE_SDCSN0 Use SDCSn[0] for the framebuffer. This + is the default setting. + +EP93XXFB_USE_SDCSN1 Use SDCSn[1] for the framebuffer. + +EP93XXFB_USE_SDCSN2 Use SDCSn[2] for the framebuffer. + +EP93XXFB_USE_SDCSN3 Use SDCSn[3] for the framebuffer. + +================== +Platform callbacks +================== + +The EP93xx framebuffer driver supports three optional platform +callbacks: setup, teardown and blank. The setup and teardown functions +are called when the framebuffer driver is installed and removed +respectively. The blank function is called whenever the display is +blanked or unblanked. + +The setup and teardown devices pass the platform_device structure as +an argument. The fb_info and ep93xxfb_mach_info structures can be +obtained as follows: + + static int some_board_fb_setup(struct platform_device *pdev) + { + struct ep93xxfb_mach_info *mach_info = pdev->dev.platform_data; + struct fb_info *fb_info = platform_get_drvdata(pdev); + + /* Board specific framebuffer setup */ + } + +====================== +Setting the video mode +====================== + +The video mode is set using the following syntax: + + video=XRESxYRES[-BPP][@REFRESH] + +If the EP93xx video driver is built-in then the video mode is set on +the Linux kernel command line, for example: + + video=ep93xx-fb:800x600-16@60 + +If the EP93xx video driver is built as a module then the video mode is +set when the module is installed: + + modprobe ep93xx-fb video=320x240 + +============== +Screenpage bug +============== + +At least on the EP9315 there is a silicon bug which causes bit 27 of +the VIDSCRNPAGE (framebuffer physical offset) to be tied low. There is +an unofficial errata for this bug at: + http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2 + +By default the EP93xx framebuffer driver checks if the allocated physical +address has bit 27 set. If it does, then the memory is freed and an +error is returned. The check can be disabled by adding the following +option when loading the driver: + + ep93xx-fb.check_screenpage_bug=0 + +In some cases it may be possible to reconfigure your SDRAM layout to +avoid this bug. See section 13 of the EP93xx users' guide for details. diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index a7944ef48a2..7be50626228 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2128,6 +2128,17 @@ config FB_MB862XX_LIME ---help--- Framebuffer support for Fujitsu Lime GDC on host CPU bus. +config FB_EP93XX + tristate "EP93XX frame buffer support" + depends on FB && ARCH_EP93XX + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Framebuffer driver for the Cirrus Logic EP93XX series of processors. + This driver is also available as a module. The module will be called + ep93xx-fb. + config FB_PRE_INIT_FB bool "Don't reinitialize, use bootloader's GDC/Display configuration" depends on FB_MB862XX_LIME diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 85b2d2322dc..80232e12488 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -85,6 +85,7 @@ obj-$(CONFIG_FB_Q40) += q40fb.o obj-$(CONFIG_FB_TGA) += tgafb.o obj-$(CONFIG_FB_HP300) += hpfb.o obj-$(CONFIG_FB_G364) += g364fb.o +obj-$(CONFIG_FB_EP93XX) += ep93xx-fb.o obj-$(CONFIG_FB_SA1100) += sa1100fb.o obj-$(CONFIG_FB_HIT) += hitfb.o obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/ep93xx-fb.c new file mode 100644 index 00000000000..bd9d46f9529 --- /dev/null +++ b/drivers/video/ep93xx-fb.c @@ -0,0 +1,646 @@ +/* + * linux/drivers/video/ep93xx-fb.c + * + * Framebuffer support for the EP93xx series. + * + * Copyright (C) 2007 Bluewater Systems Ltd + * Author: Ryan Mallon + * + * Copyright (c) 2009 H Hartley Sweeten + * + * Based on the Cirrus Logic ep93xxfb driver, and various other ep93xxfb + * drivers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include + +/* Vertical Frame Timing Registers */ +#define EP93XXFB_VLINES_TOTAL 0x0000 /* SW locked */ +#define EP93XXFB_VSYNC 0x0004 /* SW locked */ +#define EP93XXFB_VACTIVE 0x0008 /* SW locked */ +#define EP93XXFB_VBLANK 0x0228 /* SW locked */ +#define EP93XXFB_VCLK 0x000c /* SW locked */ + +/* Horizontal Frame Timing Registers */ +#define EP93XXFB_HCLKS_TOTAL 0x0010 /* SW locked */ +#define EP93XXFB_HSYNC 0x0014 /* SW locked */ +#define EP93XXFB_HACTIVE 0x0018 /* SW locked */ +#define EP93XXFB_HBLANK 0x022c /* SW locked */ +#define EP93XXFB_HCLK 0x001c /* SW locked */ + +/* Frame Buffer Memory Configuration Registers */ +#define EP93XXFB_SCREEN_PAGE 0x0028 +#define EP93XXFB_SCREEN_HPAGE 0x002c +#define EP93XXFB_SCREEN_LINES 0x0030 +#define EP93XXFB_LINE_LENGTH 0x0034 +#define EP93XXFB_VLINE_STEP 0x0038 +#define EP93XXFB_LINE_CARRY 0x003c /* SW locked */ +#define EP93XXFB_EOL_OFFSET 0x0230 + +/* Other Video Registers */ +#define EP93XXFB_BRIGHTNESS 0x0020 +#define EP93XXFB_ATTRIBS 0x0024 /* SW locked */ +#define EP93XXFB_SWLOCK 0x007c /* SW locked */ +#define EP93XXFB_AC_RATE 0x0214 +#define EP93XXFB_FIFO_LEVEL 0x0234 +#define EP93XXFB_PIXELMODE 0x0054 +#define EP93XXFB_PIXELMODE_32BPP (0x7 << 0) +#define EP93XXFB_PIXELMODE_24BPP (0x6 << 0) +#define EP93XXFB_PIXELMODE_16BPP (0x4 << 0) +#define EP93XXFB_PIXELMODE_8BPP (0x2 << 0) +#define EP93XXFB_PIXELMODE_SHIFT_1P_24B (0x0 << 3) +#define EP93XXFB_PIXELMODE_SHIFT_1P_18B (0x1 << 3) +#define EP93XXFB_PIXELMODE_COLOR_LUT (0x0 << 10) +#define EP93XXFB_PIXELMODE_COLOR_888 (0x4 << 10) +#define EP93XXFB_PIXELMODE_COLOR_555 (0x5 << 10) +#define EP93XXFB_PARL_IF_OUT 0x0058 +#define EP93XXFB_PARL_IF_IN 0x005c + +/* Blink Control Registers */ +#define EP93XXFB_BLINK_RATE 0x0040 +#define EP93XXFB_BLINK_MASK 0x0044 +#define EP93XXFB_BLINK_PATTRN 0x0048 +#define EP93XXFB_PATTRN_MASK 0x004c +#define EP93XXFB_BKGRND_OFFSET 0x0050 + +/* Hardware Cursor Registers */ +#define EP93XXFB_CURSOR_ADR_START 0x0060 +#define EP93XXFB_CURSOR_ADR_RESET 0x0064 +#define EP93XXFB_CURSOR_SIZE 0x0068 +#define EP93XXFB_CURSOR_COLOR1 0x006c +#define EP93XXFB_CURSOR_COLOR2 0x0070 +#define EP93XXFB_CURSOR_BLINK_COLOR1 0x021c +#define EP93XXFB_CURSOR_BLINK_COLOR2 0x0220 +#define EP93XXFB_CURSOR_XY_LOC 0x0074 +#define EP93XXFB_CURSOR_DSCAN_HY_LOC 0x0078 +#define EP93XXFB_CURSOR_BLINK_RATE_CTRL 0x0224 + +/* LUT Registers */ +#define EP93XXFB_GRY_SCL_LUTR 0x0080 +#define EP93XXFB_GRY_SCL_LUTG 0x0280 +#define EP93XXFB_GRY_SCL_LUTB 0x0300 +#define EP93XXFB_LUT_SW_CONTROL 0x0218 +#define EP93XXFB_LUT_SW_CONTROL_SWTCH (1 << 0) +#define EP93XXFB_LUT_SW_CONTROL_SSTAT (1 << 1) +#define EP93XXFB_COLOR_LUT 0x0400 + +/* Video Signature Registers */ +#define EP93XXFB_VID_SIG_RSLT_VAL 0x0200 +#define EP93XXFB_VID_SIG_CTRL 0x0204 +#define EP93XXFB_VSIG 0x0208 +#define EP93XXFB_HSIG 0x020c +#define EP93XXFB_SIG_CLR_STR 0x0210 + +/* Minimum / Maximum resolutions supported */ +#define EP93XXFB_MIN_XRES 64 +#define EP93XXFB_MIN_YRES 64 +#define EP93XXFB_MAX_XRES 1024 +#define EP93XXFB_MAX_YRES 768 + +struct ep93xx_fbi { + struct ep93xxfb_mach_info *mach_info; + struct clk *clk; + struct resource *res; + void __iomem *mmio_base; + unsigned int pseudo_palette[256]; +}; + +static int check_screenpage_bug = 1; +module_param(check_screenpage_bug, int, 0644); +MODULE_PARM_DESC(check_screenpage_bug, + "Check for bit 27 screen page bug. Default = 1"); + +static inline unsigned int ep93xxfb_readl(struct ep93xx_fbi *fbi, + unsigned int off) +{ + return __raw_readl(fbi->mmio_base + off); +} + +static inline void ep93xxfb_writel(struct ep93xx_fbi *fbi, + unsigned int val, unsigned int off) +{ + __raw_writel(val, fbi->mmio_base + off); +} + +/* + * Write to one of the locked raster registers. + */ +static inline void ep93xxfb_out_locked(struct ep93xx_fbi *fbi, + unsigned int val, unsigned int reg) +{ + /* + * We don't need a lock or delay here since the raster register + * block will remain unlocked until the next access. + */ + ep93xxfb_writel(fbi, 0xaa, EP93XXFB_SWLOCK); + ep93xxfb_writel(fbi, val, reg); +} + +static void ep93xxfb_set_video_attribs(struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + unsigned int attribs; + + attribs = EP93XXFB_ENABLE; + attribs |= fbi->mach_info->flags; + ep93xxfb_out_locked(fbi, attribs, EP93XXFB_ATTRIBS); +} + +static int ep93xxfb_set_pixelmode(struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + unsigned int val; + + info->var.transp.offset = 0; + info->var.transp.length = 0; + + switch (info->var.bits_per_pixel) { + case 8: + val = EP93XXFB_PIXELMODE_8BPP | EP93XXFB_PIXELMODE_COLOR_LUT | + EP93XXFB_PIXELMODE_SHIFT_1P_18B; + + info->var.red.offset = 0; + info->var.red.length = 8; + info->var.green.offset = 0; + info->var.green.length = 8; + info->var.blue.offset = 0; + info->var.blue.length = 8; + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + break; + + case 16: + val = EP93XXFB_PIXELMODE_16BPP | EP93XXFB_PIXELMODE_COLOR_555 | + EP93XXFB_PIXELMODE_SHIFT_1P_18B; + + info->var.red.offset = 11; + info->var.red.length = 5; + info->var.green.offset = 5; + info->var.green.length = 6; + info->var.blue.offset = 0; + info->var.blue.length = 5; + info->fix.visual = FB_VISUAL_TRUECOLOR; + break; + + case 24: + val = EP93XXFB_PIXELMODE_24BPP | EP93XXFB_PIXELMODE_COLOR_888 | + EP93XXFB_PIXELMODE_SHIFT_1P_24B; + + info->var.red.offset = 16; + info->var.red.length = 8; + info->var.green.offset = 8; + info->var.green.length = 8; + info->var.blue.offset = 0; + info->var.blue.length = 8; + info->fix.visual = FB_VISUAL_TRUECOLOR; + break; + + case 32: + val = EP93XXFB_PIXELMODE_32BPP | EP93XXFB_PIXELMODE_COLOR_888 | + EP93XXFB_PIXELMODE_SHIFT_1P_24B; + + info->var.red.offset = 16; + info->var.red.length = 8; + info->var.green.offset = 8; + info->var.green.length = 8; + info->var.blue.offset = 0; + info->var.blue.length = 8; + info->fix.visual = FB_VISUAL_TRUECOLOR; + break; + + default: + return -EINVAL; + } + + ep93xxfb_writel(fbi, val, EP93XXFB_PIXELMODE); + return 0; +} + +static void ep93xxfb_set_timing(struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + unsigned int vlines_total, hclks_total, start, stop; + + vlines_total = info->var.yres + info->var.upper_margin + + info->var.lower_margin + info->var.vsync_len - 1; + + hclks_total = info->var.xres + info->var.left_margin + + info->var.right_margin + info->var.hsync_len - 1; + + ep93xxfb_out_locked(fbi, vlines_total, EP93XXFB_VLINES_TOTAL); + ep93xxfb_out_locked(fbi, hclks_total, EP93XXFB_HCLKS_TOTAL); + + start = vlines_total; + stop = vlines_total - info->var.vsync_len; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VSYNC); + + start = vlines_total - info->var.vsync_len - info->var.upper_margin; + stop = info->var.lower_margin - 1; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VBLANK); + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VACTIVE); + + start = vlines_total; + stop = vlines_total + 1; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VCLK); + + start = hclks_total; + stop = hclks_total - info->var.hsync_len; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HSYNC); + + start = hclks_total - info->var.hsync_len - info->var.left_margin; + stop = info->var.right_margin - 1; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HBLANK); + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HACTIVE); + + start = hclks_total; + stop = hclks_total; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HCLK); + + ep93xxfb_out_locked(fbi, 0x0, EP93XXFB_LINE_CARRY); +} + +static int ep93xxfb_set_par(struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + + clk_set_rate(fbi->clk, 1000 * PICOS2KHZ(info->var.pixclock)); + + ep93xxfb_set_timing(info); + + info->fix.line_length = info->var.xres_virtual * + info->var.bits_per_pixel / 8; + + ep93xxfb_writel(fbi, info->fix.smem_start, EP93XXFB_SCREEN_PAGE); + ep93xxfb_writel(fbi, info->var.yres - 1, EP93XXFB_SCREEN_LINES); + ep93xxfb_writel(fbi, ((info->var.xres * info->var.bits_per_pixel) + / 32) - 1, EP93XXFB_LINE_LENGTH); + ep93xxfb_writel(fbi, info->fix.line_length / 4, EP93XXFB_VLINE_STEP); + ep93xxfb_set_video_attribs(info); + return 0; +} + +static int ep93xxfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + int err; + + err = ep93xxfb_set_pixelmode(info); + if (err) + return err; + + var->xres = max_t(unsigned int, var->xres, EP93XXFB_MIN_XRES); + var->xres = min_t(unsigned int, var->xres, EP93XXFB_MAX_XRES); + var->xres_virtual = max(var->xres_virtual, var->xres); + + var->yres = max_t(unsigned int, var->yres, EP93XXFB_MIN_YRES); + var->yres = min_t(unsigned int, var->yres, EP93XXFB_MAX_YRES); + var->yres_virtual = max(var->yres_virtual, var->yres); + + return 0; +} + +static int ep93xxfb_mmap(struct fb_info *info, struct vm_area_struct *vma) +{ + unsigned int offset = vma->vm_pgoff << PAGE_SHIFT; + + if (offset < info->fix.smem_len) { + return dma_mmap_writecombine(info->dev, vma, info->screen_base, + info->fix.smem_start, + info->fix.smem_len); + } + + return -EINVAL; +} + +static int ep93xxfb_blank(int blank_mode, struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + unsigned int attribs = ep93xxfb_readl(fbi, EP93XXFB_ATTRIBS); + + if (blank_mode) { + if (fbi->mach_info->blank) + fbi->mach_info->blank(blank_mode, info); + ep93xxfb_out_locked(fbi, attribs & ~EP93XXFB_ENABLE, + EP93XXFB_ATTRIBS); + clk_disable(fbi->clk); + } else { + clk_enable(fbi->clk); + ep93xxfb_out_locked(fbi, attribs | EP93XXFB_ENABLE, + EP93XXFB_ATTRIBS); + if (fbi->mach_info->blank) + fbi->mach_info->blank(blank_mode, info); + } + + return 0; +} + +static inline int ep93xxfb_convert_color(int val, int width) +{ + return ((val << width) + 0x7fff - val) >> 16; +} + +static int ep93xxfb_setcolreg(unsigned int regno, unsigned int red, + unsigned int green, unsigned int blue, + unsigned int transp, struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + unsigned int *pal = info->pseudo_palette; + unsigned int ctrl, i, rgb, lut_current, lut_stat; + + switch (info->fix.visual) { + case FB_VISUAL_PSEUDOCOLOR: + rgb = ((red & 0xff00) << 8) | (green & 0xff00) | + ((blue & 0xff00) >> 8); + + pal[regno] = rgb; + ep93xxfb_writel(fbi, rgb, (EP93XXFB_COLOR_LUT + (regno << 2))); + ctrl = ep93xxfb_readl(fbi, EP93XXFB_LUT_SW_CONTROL); + lut_stat = !!(ctrl & EP93XXFB_LUT_SW_CONTROL_SSTAT); + lut_current = !!(ctrl & EP93XXFB_LUT_SW_CONTROL_SWTCH); + + if (lut_stat == lut_current) { + for (i = 0; i < 256; i++) { + ep93xxfb_writel(fbi, pal[i], + EP93XXFB_COLOR_LUT + (i << 2)); + } + + ep93xxfb_writel(fbi, + ctrl ^ EP93XXFB_LUT_SW_CONTROL_SWTCH, + EP93XXFB_LUT_SW_CONTROL); + } + break; + + case FB_VISUAL_TRUECOLOR: + if (regno > 16) + return 1; + + red = ep93xxfb_convert_color(red, info->var.red.length); + green = ep93xxfb_convert_color(green, info->var.green.length); + blue = ep93xxfb_convert_color(blue, info->var.blue.length); + transp = ep93xxfb_convert_color(transp, + info->var.transp.length); + + pal[regno] = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset) | + (transp << info->var.transp.offset); + break; + + default: + return 1; + } + + return 0; +} + +static struct fb_ops ep93xxfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = ep93xxfb_check_var, + .fb_set_par = ep93xxfb_set_par, + .fb_blank = ep93xxfb_blank, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_setcolreg = ep93xxfb_setcolreg, + .fb_mmap = ep93xxfb_mmap, +}; + +static int __init ep93xxfb_calc_fbsize(struct ep93xxfb_mach_info *mach_info) +{ + int i, fb_size = 0; + + if (mach_info->num_modes == EP93XXFB_USE_MODEDB) { + fb_size = EP93XXFB_MAX_XRES * EP93XXFB_MAX_YRES * + mach_info->bpp / 8; + } else { + for (i = 0; i < mach_info->num_modes; i++) { + const struct fb_videomode *mode; + int size; + + mode = &mach_info->modes[i]; + size = mode->xres * mode->yres * mach_info->bpp / 8; + if (size > fb_size) + fb_size = size; + } + } + + return fb_size; +} + +static int __init ep93xxfb_alloc_videomem(struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + char __iomem *virt_addr; + dma_addr_t phys_addr; + unsigned int fb_size; + + fb_size = ep93xxfb_calc_fbsize(fbi->mach_info); + virt_addr = dma_alloc_writecombine(info->dev, fb_size, + &phys_addr, GFP_KERNEL); + if (!virt_addr) + return -ENOMEM; + + /* + * There is a bug in the ep93xx framebuffer which causes problems + * if bit 27 of the physical address is set. + * See: http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2 + * There does not seem to be any offical errata for this, but I + * have confirmed the problem exists on my hardware (ep9315) at + * least. + */ + if (check_screenpage_bug && phys_addr & (1 << 27)) { + dev_err(info->dev, "ep93xx framebuffer bug. phys addr (0x%x) " + "has bit 27 set: cannot init framebuffer\n", + phys_addr); + + dma_free_coherent(info->dev, fb_size, virt_addr, phys_addr); + return -ENOMEM; + } + + info->fix.smem_start = phys_addr; + info->fix.smem_len = fb_size; + info->screen_base = virt_addr; + + return 0; +} + +static void ep93xxfb_dealloc_videomem(struct fb_info *info) +{ + if (info->screen_base) + dma_free_coherent(info->dev, info->fix.smem_len, + info->screen_base, info->fix.smem_start); +} + +static int __init ep93xxfb_probe(struct platform_device *pdev) +{ + struct ep93xxfb_mach_info *mach_info = pdev->dev.platform_data; + struct fb_info *info; + struct ep93xx_fbi *fbi; + struct resource *res; + char *video_mode; + int err; + + if (!mach_info) + return -EINVAL; + + info = framebuffer_alloc(sizeof(struct ep93xx_fbi), &pdev->dev); + if (!info) + return -ENOMEM; + + info->dev = &pdev->dev; + platform_set_drvdata(pdev, info); + fbi = info->par; + fbi->mach_info = mach_info; + + err = fb_alloc_cmap(&info->cmap, 256, 0); + if (err) + goto failed; + + err = ep93xxfb_alloc_videomem(info); + if (err) + goto failed; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + err = -ENXIO; + goto failed; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + err = -EBUSY; + goto failed; + } + + fbi->res = res; + fbi->mmio_base = ioremap(res->start, resource_size(res)); + if (!fbi->mmio_base) { + err = -ENXIO; + goto failed; + } + + strcpy(info->fix.id, pdev->name); + info->fbops = &ep93xxfb_ops; + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.accel = FB_ACCEL_NONE; + info->var.activate = FB_ACTIVATE_NOW; + info->var.vmode = FB_VMODE_NONINTERLACED; + info->flags = FBINFO_DEFAULT; + info->node = -1; + info->state = FBINFO_STATE_RUNNING; + info->pseudo_palette = &fbi->pseudo_palette; + + fb_get_options("ep93xx-fb", &video_mode); + err = fb_find_mode(&info->var, info, video_mode, + fbi->mach_info->modes, fbi->mach_info->num_modes, + fbi->mach_info->default_mode, fbi->mach_info->bpp); + if (err == 0) { + dev_err(info->dev, "No suitable video mode found\n"); + err = -EINVAL; + goto failed; + } + + if (mach_info->setup) { + err = mach_info->setup(pdev); + if (err) + return err; + } + + err = ep93xxfb_check_var(&info->var, info); + if (err) + goto failed; + + fbi->clk = clk_get(info->dev, NULL); + if (IS_ERR(fbi->clk)) { + err = PTR_ERR(fbi->clk); + fbi->clk = NULL; + goto failed; + } + + ep93xxfb_set_par(info); + clk_enable(fbi->clk); + + err = register_framebuffer(info); + if (err) + goto failed; + + dev_info(info->dev, "registered. Mode = %dx%d-%d\n", + info->var.xres, info->var.yres, info->var.bits_per_pixel); + return 0; + +failed: + if (fbi->clk) + clk_put(fbi->clk); + if (fbi->mmio_base) + iounmap(fbi->mmio_base); + if (fbi->res) + release_mem_region(fbi->res->start, resource_size(fbi->res)); + ep93xxfb_dealloc_videomem(info); + if (&info->cmap) + fb_dealloc_cmap(&info->cmap); + if (fbi->mach_info->teardown) + fbi->mach_info->teardown(pdev); + kfree(info); + platform_set_drvdata(pdev, NULL); + + return err; +} + +static int ep93xxfb_remove(struct platform_device *pdev) +{ + struct fb_info *info = platform_get_drvdata(pdev); + struct ep93xx_fbi *fbi = info->par; + + unregister_framebuffer(info); + clk_disable(fbi->clk); + clk_put(fbi->clk); + iounmap(fbi->mmio_base); + release_mem_region(fbi->res->start, resource_size(fbi->res)); + ep93xxfb_dealloc_videomem(info); + fb_dealloc_cmap(&info->cmap); + + if (fbi->mach_info->teardown) + fbi->mach_info->teardown(pdev); + + kfree(info); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver ep93xxfb_driver = { + .probe = ep93xxfb_probe, + .remove = ep93xxfb_remove, + .driver = { + .name = "ep93xx-fb", + .owner = THIS_MODULE, + }, +}; + +static int __devinit ep93xxfb_init(void) +{ + return platform_driver_register(&ep93xxfb_driver); +} + +static void __exit ep93xxfb_exit(void) +{ + platform_driver_unregister(&ep93xxfb_driver); +} + +module_init(ep93xxfb_init); +module_exit(ep93xxfb_exit); + +MODULE_DESCRIPTION("EP93XX Framebuffer Driver"); +MODULE_ALIAS("platform:ep93xx-fb"); +MODULE_AUTHOR("Ryan Mallon , " + "H Hartley Sweeten Date: Tue, 22 Sep 2009 16:47:47 -0700 Subject: matroxfb: make CONFIG_FB_MATROX_MULTIHEAD=y mandatory I would like to get rid of option CONFIG_FB_MATROX_MULTIHEAD and just always enable it. There are many reasons for doing this: * CONFIG_FB_MATROX_MULTIHEAD=y is what all x86 distributions do, so it definitely works or we would know by now. * Building the matroxfb driver with CONFIG_FB_MATROX_MULTIHEAD not set results in the following build warning: drivers/video/matrox/matroxfb_crtc2.c: In function 'matroxfb_dh_open': drivers/video/matrox/matroxfb_crtc2.c:265: warning: the address of 'matroxfb_global_mxinfo' will always evaluate as 'true' drivers/video/matrox/matroxfb_crtc2.c: In function 'matroxfb_dh_release': drivers/video/matrox/matroxfb_crtc2.c:285: warning: the address of 'matroxfb_global_mxinfo' will always evaluate as 'true' This is nothing to be worried about, the driver will work fine, but build warnings are still annoying. * The trick to get multihead support without CONFIG_FB_MATROX_MULTIHEAD, which is described in the config help text, no longer works: you can't load the same kernel module more than once. * I fail to see how CONFIG_FB_MATROX_MULTIHEAD=y would make the code significantly slower, contrary to what the help text says. A few extra parameters on the stack here and there can't really slow things down in comaprison to the rest of the code, and register access. * The driver built without CONFIG_FB_MATROX_MULTIHEAD is larger than the driver build with CONFIG_FB_MATROX_MULTIHEAD=y by 8%. * One less configuration option makes things simpler. We add options all the time, being able to remove one for once is nice. It improves testing coverage. And I don't think the Matrox adapters are still popular enough to warrant overdetailed configuration settings. * We should be able to unobfuscate the driver code quite a bit after this change (patches follow.) Signed-off-by: Jean Delvare Acked-by: Petr Vandrovec Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/fb/matroxfb.txt | 4 +--- drivers/video/Kconfig | 20 -------------------- drivers/video/matrox/matroxfb_base.c | 23 ----------------------- drivers/video/matrox/matroxfb_base.h | 20 -------------------- drivers/video/matrox/matroxfb_misc.c | 4 ---- 5 files changed, 1 insertion(+), 70 deletions(-) (limited to 'Documentation') diff --git a/Documentation/fb/matroxfb.txt b/Documentation/fb/matroxfb.txt index ad7a67707d6..e5ce8a1a978 100644 --- a/Documentation/fb/matroxfb.txt +++ b/Documentation/fb/matroxfb.txt @@ -186,9 +186,7 @@ noinverse - show true colors on screen. It is default. dev:X - bind driver to device X. Driver numbers device from 0 up to N, where device 0 is first `known' device found, 1 second and so on. lspci lists devices in this order. - Default is `every' known device for driver with multihead support - and first working device (usually dev:0) for driver without - multihead support. + Default is `every' known device. nohwcursor - disables hardware cursor (use software cursor instead). hwcursor - enables hardware cursor. It is default. If you are using non-accelerated mode (`noaccel' or `fbset -accel false'), software diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 7be50626228..9bbb2855ea9 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1275,26 +1275,6 @@ config FB_MATROX_MAVEN painting procedures (the secondary head does not use acceleration engine). -config FB_MATROX_MULTIHEAD - bool "Multihead support" - depends on FB_MATROX - ---help--- - Say Y here if you have more than one (supported) Matrox device in - your computer and you want to use all of them for different monitors - ("multihead"). If you have only one device, you should say N because - the driver compiled with Y is larger and a bit slower, especially on - ia32 (ix86). - - If you said M to "Matrox unified accelerated driver" and N here, you - will still be able to use several Matrox devices simultaneously: - insert several instances of the module matroxfb into the kernel - with insmod, supplying the parameter "dev=N" where N is 0, 1, etc. - for the different Matrox devices. This method is slightly faster but - uses 40 KB of kernel memory per Matrox card. - - There is no need for enabling 'Matrox multihead support' if you have - only one Matrox card in the box. - config FB_RADEON tristate "ATI Radeon display support" depends on FB && PCI diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c index 0c1049b308b..6ede98da461 100644 --- a/drivers/video/matrox/matroxfb_base.c +++ b/drivers/video/matrox/matroxfb_base.c @@ -379,9 +379,7 @@ static void matroxfb_remove(WPMINFO int dummy) { mga_iounmap(ACCESS_FBINFO(video.vbase)); release_mem_region(ACCESS_FBINFO(video.base), ACCESS_FBINFO(video.len_maximum)); release_mem_region(ACCESS_FBINFO(mmio.base), 16384); -#ifdef CONFIG_FB_MATROX_MULTIHEAD kfree(minfo); -#endif } /* @@ -644,9 +642,7 @@ static int matroxfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fb_info) { -#ifdef CONFIG_FB_MATROX_MULTIHEAD struct matrox_fb_info* minfo = container_of(fb_info, struct matrox_fb_info, fbcon); -#endif DBG(__func__) @@ -2011,9 +2007,6 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm struct matrox_fb_info* minfo; int err; u_int32_t cmd; -#ifndef CONFIG_FB_MATROX_MULTIHEAD - static int registered = 0; -#endif DBG(__func__) svid = pdev->subsystem_vendor; @@ -2037,15 +2030,9 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm return -1; } -#ifdef CONFIG_FB_MATROX_MULTIHEAD minfo = kmalloc(sizeof(*minfo), GFP_KERNEL); if (!minfo) return -1; -#else - if (registered) /* singlehead driver... */ - return -1; - minfo = &matroxfb_global_mxinfo; -#endif memset(MINFO, 0, sizeof(*MINFO)); ACCESS_FBINFO(pcidev) = pdev; @@ -2090,15 +2077,10 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm err = initMatrox2(PMINFO b); if (!err) { -#ifndef CONFIG_FB_MATROX_MULTIHEAD - registered = 1; -#endif matroxfb_register_device(MINFO); return 0; } -#ifdef CONFIG_FB_MATROX_MULTIHEAD kfree(minfo); -#endif return -1; } @@ -2510,13 +2492,8 @@ module_param(inv24, int, 0); MODULE_PARM_DESC(inv24, "Inverts clock polarity for 24bpp and loop frequency > 100MHz (default=do not invert polarity)"); module_param(inverse, int, 0); MODULE_PARM_DESC(inverse, "Inverse (0 or 1) (default=0)"); -#ifdef CONFIG_FB_MATROX_MULTIHEAD module_param(dev, int, 0); MODULE_PARM_DESC(dev, "Multihead support, attach to device ID (0..N) (default=all working)"); -#else -module_param(dev, int, 0); -MODULE_PARM_DESC(dev, "Multihead support, attach to device ID (0..N) (default=first working)"); -#endif module_param(vesa, int, 0); MODULE_PARM_DESC(vesa, "Startup videomode (0x000-0x1FF) (default=0x101)"); module_param(xres, int, 0); diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h index 95883236c0c..ba64f5e3346 100644 --- a/drivers/video/matrox/matroxfb_base.h +++ b/drivers/video/matrox/matroxfb_base.h @@ -524,7 +524,6 @@ struct matrox_fb_info { #define info2minfo(info) container_of(info, struct matrox_fb_info, fbcon) -#ifdef CONFIG_FB_MATROX_MULTIHEAD #define ACCESS_FBINFO2(info, x) (info->x) #define ACCESS_FBINFO(x) ACCESS_FBINFO2(minfo,x) @@ -538,25 +537,6 @@ struct matrox_fb_info { #define PMINFO PMINFO2 , #define MINFO_FROM(x) struct matrox_fb_info* minfo = x -#else - -extern struct matrox_fb_info matroxfb_global_mxinfo; - -#define ACCESS_FBINFO(x) (matroxfb_global_mxinfo.x) -#define ACCESS_FBINFO2(info, x) (matroxfb_global_mxinfo.x) - -#define MINFO (&matroxfb_global_mxinfo) - -#define WPMINFO2 void -#define WPMINFO -#define CPMINFO2 void -#define CPMINFO -#define PMINFO2 -#define PMINFO - -#define MINFO_FROM(x) - -#endif #define MINFO_FROM_INFO(x) MINFO_FROM(info2minfo(x)) diff --git a/drivers/video/matrox/matroxfb_misc.c b/drivers/video/matrox/matroxfb_misc.c index 5b5f072fc1a..d5b9e789cca 100644 --- a/drivers/video/matrox/matroxfb_misc.c +++ b/drivers/video/matrox/matroxfb_misc.c @@ -784,10 +784,6 @@ EXPORT_SYMBOL(matroxfb_DAC_in); EXPORT_SYMBOL(matroxfb_DAC_out); EXPORT_SYMBOL(matroxfb_var2my); EXPORT_SYMBOL(matroxfb_PLL_calcclock); -#ifndef CONFIG_FB_MATROX_MULTIHEAD -struct matrox_fb_info matroxfb_global_mxinfo; -EXPORT_SYMBOL(matroxfb_global_mxinfo); -#endif EXPORT_SYMBOL(matroxfb_vgaHWinit); /* DAC1064, Ti3026 */ EXPORT_SYMBOL(matroxfb_vgaHWrestore); /* DAC1064, Ti3026 */ EXPORT_SYMBOL(matroxfb_read_pins); -- cgit v1.2.3-70-g09d2