From 6e1cb38a2aef7680975e71f23de187859ee8b158 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:58 -0700 Subject: x64, x2apic/intr-remap: add x2apic support, including enabling interrupt-remapping x2apic support. Interrupt-remapping must be enabled before enabling x2apic, this is needed to ensure that IO interrupts continue to work properly after the cpu mode is changed to x2apic(which uses 32bit extended physical/cluster apic id). On systems where apicid's are > 255, BIOS can handover the control to OS in x2apic mode. Or if the OS handover was in legacy xapic mode, check if it is capable of x2apic mode. And if we succeed in enabling Interrupt-remapping, then we can enable x2apic mode in the CPU. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 795c487af8e..56689ef1a15 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1377,6 +1377,8 @@ and is between 256 and 4096 characters. It is defined in the file nolapic_timer [X86-32,APIC] Do not use the local APIC timer. + nox2apic [X86-64,APIC] Do not enable x2APIC mode. + noltlbs [PPC] Do not use large page/tlb entries for kernel lowmem mapping on PPC40x. -- cgit v1.2.3-70-g09d2 From af9d13887f9e3699bbc852c39b076d30bb9dff2f Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 11 Jul 2008 13:11:57 -0700 Subject: x2apic: kernel-parameter documentation for "x2apic_phys" Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 56689ef1a15..88b08acf2ff 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1379,6 +1379,10 @@ and is between 256 and 4096 characters. It is defined in the file nox2apic [X86-64,APIC] Do not enable x2APIC mode. + x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of + default x2apic cluster mode on platforms + supporting x2apic. + noltlbs [PPC] Do not use large page/tlb entries for kernel lowmem mapping on PPC40x. -- cgit v1.2.3-70-g09d2 From 5616c23ad9cd3c50af674d408fef7b90abeee81c Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 22 Jul 2008 15:32:38 -0400 Subject: x86: doc: move x86-generic documentation from Doc/x86/i386 The boot protocol, USB legacy support, and zero-page documentation is common to the x86 platform, not i386-specific. Signed-off-by: H. Peter Anvin --- Documentation/x86/boot.txt | 900 ++++++++++++++++++++++++++ Documentation/x86/i386/boot.txt | 900 -------------------------- Documentation/x86/i386/usb-legacy-support.txt | 44 -- Documentation/x86/i386/zero-page.txt | 31 - Documentation/x86/usb-legacy-support.txt | 44 ++ Documentation/x86/zero-page.txt | 31 + 6 files changed, 975 insertions(+), 975 deletions(-) create mode 100644 Documentation/x86/boot.txt delete mode 100644 Documentation/x86/i386/boot.txt delete mode 100644 Documentation/x86/i386/usb-legacy-support.txt delete mode 100644 Documentation/x86/i386/zero-page.txt create mode 100644 Documentation/x86/usb-legacy-support.txt create mode 100644 Documentation/x86/zero-page.txt (limited to 'Documentation') diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt new file mode 100644 index 00000000000..147bfe511cd --- /dev/null +++ b/Documentation/x86/boot.txt @@ -0,0 +1,900 @@ + THE LINUX/x86 BOOT PROTOCOL + --------------------------- + +On the x86 platform, the Linux kernel uses a rather complicated boot +convention. This has evolved partially due to historical aspects, as +well as the desire in the early days to have the kernel itself be a +bootable image, the complicated PC memory model and due to changed +expectations in the PC industry caused by the effective demise of +real-mode DOS as a mainstream operating system. + +Currently, the following versions of the Linux/x86 boot protocol exist. + +Old kernels: zImage/Image support only. Some very early kernels + may not even support a command line. + +Protocol 2.00: (Kernel 1.3.73) Added bzImage and initrd support, as + well as a formalized way to communicate between the + boot loader and the kernel. setup.S made relocatable, + although the traditional setup area still assumed + writable. + +Protocol 2.01: (Kernel 1.3.76) Added a heap overrun warning. + +Protocol 2.02: (Kernel 2.4.0-test3-pre3) New command line protocol. + Lower the conventional memory ceiling. No overwrite + of the traditional setup area, thus making booting + safe for systems which use the EBDA from SMM or 32-bit + BIOS entry points. zImage deprecated but still + supported. + +Protocol 2.03: (Kernel 2.4.18-pre1) Explicitly makes the highest possible + initrd address available to the bootloader. + +Protocol 2.04: (Kernel 2.6.14) Extend the syssize field to four bytes. + +Protocol 2.05: (Kernel 2.6.20) Make protected mode kernel relocatable. + Introduce relocatable_kernel and kernel_alignment fields. + +Protocol 2.06: (Kernel 2.6.22) Added a field that contains the size of + the boot command line. + +Protocol 2.07: (Kernel 2.6.24) Added paravirtualised boot protocol. + Introduced hardware_subarch and hardware_subarch_data + and KEEP_SEGMENTS flag in load_flags. + +Protocol 2.08: (Kernel 2.6.26) Added crc32 checksum and ELF format + payload. Introduced payload_offset and payload length + fields to aid in locating the payload. + +Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical + pointer to single linked list of struct setup_data. + +**** MEMORY LAYOUT + +The traditional memory map for the kernel loader, used for Image or +zImage kernels, typically looks like: + + | | +0A0000 +------------------------+ + | Reserved for BIOS | Do not use. Reserved for BIOS EBDA. +09A000 +------------------------+ + | Command line | + | Stack/heap | For use by the kernel real-mode code. +098000 +------------------------+ + | Kernel setup | The kernel real-mode code. +090200 +------------------------+ + | Kernel boot sector | The kernel legacy boot sector. +090000 +------------------------+ + | Protected-mode kernel | The bulk of the kernel image. +010000 +------------------------+ + | Boot loader | <- Boot sector entry point 0000:7C00 +001000 +------------------------+ + | Reserved for MBR/BIOS | +000800 +------------------------+ + | Typically used by MBR | +000600 +------------------------+ + | BIOS use only | +000000 +------------------------+ + + +When using bzImage, the protected-mode kernel was relocated to +0x100000 ("high memory"), and the kernel real-mode block (boot sector, +setup, and stack/heap) was made relocatable to any address between +0x10000 and end of low memory. Unfortunately, in protocols 2.00 and +2.01 the 0x90000+ memory range is still used internally by the kernel; +the 2.02 protocol resolves that problem. + +It is desirable to keep the "memory ceiling" -- the highest point in +low memory touched by the boot loader -- as low as possible, since +some newer BIOSes have begun to allocate some rather large amounts of +memory, called the Extended BIOS Data Area, near the top of low +memory. The boot loader should use the "INT 12h" BIOS call to verify +how much low memory is available. + +Unfortunately, if INT 12h reports that the amount of memory is too +low, there is usually nothing the boot loader can do but to report an +error to the user. The boot loader should therefore be designed to +take up as little space in low memory as it reasonably can. For +zImage or old bzImage kernels, which need data written into the +0x90000 segment, the boot loader should make sure not to use memory +above the 0x9A000 point; too many BIOSes will break above that point. + +For a modern bzImage kernel with boot protocol version >= 2.02, a +memory layout like the following is suggested: + + ~ ~ + | Protected-mode kernel | +100000 +------------------------+ + | I/O memory hole | +0A0000 +------------------------+ + | Reserved for BIOS | Leave as much as possible unused + ~ ~ + | Command line | (Can also be below the X+10000 mark) +X+10000 +------------------------+ + | Stack/heap | For use by the kernel real-mode code. +X+08000 +------------------------+ + | Kernel setup | The kernel real-mode code. + | Kernel boot sector | The kernel legacy boot sector. +X +------------------------+ + | Boot loader | <- Boot sector entry point 0000:7C00 +001000 +------------------------+ + | Reserved for MBR/BIOS | +000800 +------------------------+ + | Typically used by MBR | +000600 +------------------------+ + | BIOS use only | +000000 +------------------------+ + +... where the address X is as low as the design of the boot loader +permits. + + +**** THE REAL-MODE KERNEL HEADER + +In the following text, and anywhere in the kernel boot sequence, "a +sector" refers to 512 bytes. It is independent of the actual sector +size of the underlying medium. + +The first step in loading a Linux kernel should be to load the +real-mode code (boot sector and setup code) and then examine the +following header at offset 0x01f1. The real-mode code can total up to +32K, although the boot loader may choose to load only the first two +sectors (1K) and then examine the bootup sector size. + +The header looks like: + +Offset Proto Name Meaning +/Size + +01F1/1 ALL(1 setup_sects The size of the setup in sectors +01F2/2 ALL root_flags If set, the root is mounted readonly +01F4/4 2.04+(2 syssize The size of the 32-bit code in 16-byte paras +01F8/2 ALL ram_size DO NOT USE - for bootsect.S use only +01FA/2 ALL vid_mode Video mode control +01FC/2 ALL root_dev Default root device number +01FE/2 ALL boot_flag 0xAA55 magic number +0200/2 2.00+ jump Jump instruction +0202/4 2.00+ header Magic signature "HdrS" +0206/2 2.00+ version Boot protocol version supported +0208/4 2.00+ realmode_swtch Boot loader hook (see below) +020C/2 2.00+ start_sys The load-low segment (0x1000) (obsolete) +020E/2 2.00+ kernel_version Pointer to kernel version string +0210/1 2.00+ type_of_loader Boot loader identifier +0211/1 2.00+ loadflags Boot protocol option flags +0212/2 2.00+ setup_move_size Move to high memory size (used with hooks) +0214/4 2.00+ code32_start Boot loader hook (see below) +0218/4 2.00+ ramdisk_image initrd load address (set by boot loader) +021C/4 2.00+ ramdisk_size initrd size (set by boot loader) +0220/4 2.00+ bootsect_kludge DO NOT USE - for bootsect.S use only +0224/2 2.01+ heap_end_ptr Free memory after setup end +0226/2 N/A pad1 Unused +0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line +022C/4 2.03+ initrd_addr_max Highest legal initrd address +0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel +0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not +0235/3 N/A pad2 Unused +0238/4 2.06+ cmdline_size Maximum size of the kernel command line +023C/4 2.07+ hardware_subarch Hardware subarchitecture +0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data +0248/4 2.08+ payload_offset Offset of kernel payload +024C/4 2.08+ payload_length Length of kernel payload +0250/8 2.09+ setup_data 64-bit physical pointer to linked list + of struct setup_data + +(1) For backwards compatibility, if the setup_sects field contains 0, the + real value is 4. + +(2) For boot protocol prior to 2.04, the upper two bytes of the syssize + field are unusable, which means the size of a bzImage kernel + cannot be determined. + +If the "HdrS" (0x53726448) magic number is not found at offset 0x202, +the boot protocol version is "old". Loading an old kernel, the +following parameters should be assumed: + + Image type = zImage + initrd not supported + Real-mode kernel must be located at 0x90000. + +Otherwise, the "version" field contains the protocol version, +e.g. protocol version 2.01 will contain 0x0201 in this field. When +setting fields in the header, you must make sure only to set fields +supported by the protocol version in use. + + +**** DETAILS OF HEADER FIELDS + +For each field, some are information from the kernel to the bootloader +("read"), some are expected to be filled out by the bootloader +("write"), and some are expected to be read and modified by the +bootloader ("modify"). + +All general purpose boot loaders should write the fields marked +(obligatory). Boot loaders who want to load the kernel at a +nonstandard address should fill in the fields marked (reloc); other +boot loaders can ignore those fields. + +The byte order of all fields is littleendian (this is x86, after all.) + +Field name: setup_sects +Type: read +Offset/size: 0x1f1/1 +Protocol: ALL + + The size of the setup code in 512-byte sectors. If this field is + 0, the real value is 4. The real-mode code consists of the boot + sector (always one 512-byte sector) plus the setup code. + +Field name: root_flags +Type: modify (optional) +Offset/size: 0x1f2/2 +Protocol: ALL + + If this field is nonzero, the root defaults to readonly. The use of + this field is deprecated; use the "ro" or "rw" options on the + command line instead. + +Field name: syssize +Type: read +Offset/size: 0x1f4/4 (protocol 2.04+) 0x1f4/2 (protocol ALL) +Protocol: 2.04+ + + The size of the protected-mode code in units of 16-byte paragraphs. + For protocol versions older than 2.04 this field is only two bytes + wide, and therefore cannot be trusted for the size of a kernel if + the LOAD_HIGH flag is set. + +Field name: ram_size +Type: kernel internal +Offset/size: 0x1f8/2 +Protocol: ALL + + This field is obsolete. + +Field name: vid_mode +Type: modify (obligatory) +Offset/size: 0x1fa/2 + + Please see the section on SPECIAL COMMAND LINE OPTIONS. + +Field name: root_dev +Type: modify (optional) +Offset/size: 0x1fc/2 +Protocol: ALL + + The default root device device number. The use of this field is + deprecated, use the "root=" option on the command line instead. + +Field name: boot_flag +Type: read +Offset/size: 0x1fe/2 +Protocol: ALL + + Contains 0xAA55. This is the closest thing old Linux kernels have + to a magic number. + +Field name: jump +Type: read +Offset/size: 0x200/2 +Protocol: 2.00+ + + Contains an x86 jump instruction, 0xEB followed by a signed offset + relative to byte 0x202. This can be used to determine the size of + the header. + +Field name: header +Type: read +Offset/size: 0x202/4 +Protocol: 2.00+ + + Contains the magic number "HdrS" (0x53726448). + +Field name: version +Type: read +Offset/size: 0x206/2 +Protocol: 2.00+ + + Contains the boot protocol version, in (major << 8)+minor format, + e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version + 10.17. + +Field name: readmode_swtch +Type: modify (optional) +Offset/size: 0x208/4 +Protocol: 2.00+ + + Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) + +Field name: start_sys +Type: read +Offset/size: 0x20c/4 +Protocol: 2.00+ + + The load low segment (0x1000). Obsolete. + +Field name: kernel_version +Type: read +Offset/size: 0x20e/2 +Protocol: 2.00+ + + If set to a nonzero value, contains a pointer to a NUL-terminated + human-readable kernel version number string, less 0x200. This can + be used to display the kernel version to the user. This value + should be less than (0x200*setup_sects). + + For example, if this value is set to 0x1c00, the kernel version + number string can be found at offset 0x1e00 in the kernel file. + This is a valid value if and only if the "setup_sects" field + contains the value 15 or higher, as: + + 0x1c00 < 15*0x200 (= 0x1e00) but + 0x1c00 >= 14*0x200 (= 0x1c00) + + 0x1c00 >> 9 = 14, so the minimum value for setup_secs is 15. + +Field name: type_of_loader +Type: write (obligatory) +Offset/size: 0x210/1 +Protocol: 2.00+ + + If your boot loader has an assigned id (see table below), enter + 0xTV here, where T is an identifier for the boot loader and V is + a version number. Otherwise, enter 0xFF here. + + Assigned boot loader ids: + 0 LILO (0x00 reserved for pre-2.00 bootloader) + 1 Loadlin + 2 bootsect-loader (0x20, all other values reserved) + 3 SYSLINUX + 4 EtherBoot + 5 ELILO + 7 GRuB + 8 U-BOOT + 9 Xen + A Gujin + B Qemu + + Please contact if you need a bootloader ID + value assigned. + +Field name: loadflags +Type: modify (obligatory) +Offset/size: 0x211/1 +Protocol: 2.00+ + + This field is a bitmask. + + Bit 0 (read): LOADED_HIGH + - If 0, the protected-mode code is loaded at 0x10000. + - If 1, the protected-mode code is loaded at 0x100000. + + Bit 5 (write): QUIET_FLAG + - If 0, print early messages. + - If 1, suppress early messages. + This requests to the kernel (decompressor and early + kernel) to not write early messages that require + accessing the display hardware directly. + + Bit 6 (write): KEEP_SEGMENTS + Protocol: 2.07+ + - If 0, reload the segment registers in the 32bit entry point. + - If 1, do not reload the segment registers in the 32bit entry point. + Assume that %cs %ds %ss %es are all set to flat segments with + a base of 0 (or the equivalent for their environment). + + Bit 7 (write): CAN_USE_HEAP + Set this bit to 1 to indicate that the value entered in the + heap_end_ptr is valid. If this field is clear, some setup code + functionality will be disabled. + +Field name: setup_move_size +Type: modify (obligatory) +Offset/size: 0x212/2 +Protocol: 2.00-2.01 + + When using protocol 2.00 or 2.01, if the real mode kernel is not + loaded at 0x90000, it gets moved there later in the loading + sequence. Fill in this field if you want additional data (such as + the kernel command line) moved in addition to the real-mode kernel + itself. + + The unit is bytes starting with the beginning of the boot sector. + + This field is can be ignored when the protocol is 2.02 or higher, or + if the real-mode code is loaded at 0x90000. + +Field name: code32_start +Type: modify (optional, reloc) +Offset/size: 0x214/4 +Protocol: 2.00+ + + The address to jump to in protected mode. This defaults to the load + address of the kernel, and can be used by the boot loader to + determine the proper load address. + + This field can be modified for two purposes: + + 1. as a boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) + + 2. if a bootloader which does not install a hook loads a + relocatable kernel at a nonstandard address it will have to modify + this field to point to the load address. + +Field name: ramdisk_image +Type: write (obligatory) +Offset/size: 0x218/4 +Protocol: 2.00+ + + The 32-bit linear address of the initial ramdisk or ramfs. Leave at + zero if there is no initial ramdisk/ramfs. + +Field name: ramdisk_size +Type: write (obligatory) +Offset/size: 0x21c/4 +Protocol: 2.00+ + + Size of the initial ramdisk or ramfs. Leave at zero if there is no + initial ramdisk/ramfs. + +Field name: bootsect_kludge +Type: kernel internal +Offset/size: 0x220/4 +Protocol: 2.00+ + + This field is obsolete. + +Field name: heap_end_ptr +Type: write (obligatory) +Offset/size: 0x224/2 +Protocol: 2.01+ + + Set this field to the offset (from the beginning of the real-mode + code) of the end of the setup stack/heap, minus 0x0200. + +Field name: cmd_line_ptr +Type: write (obligatory) +Offset/size: 0x228/4 +Protocol: 2.02+ + + Set this field to the linear address of the kernel command line. + The kernel command line can be located anywhere between the end of + the setup heap and 0xA0000; it does not have to be located in the + same 64K segment as the real-mode code itself. + + Fill in this field even if your boot loader does not support a + command line, in which case you can point this to an empty string + (or better yet, to the string "auto".) If this field is left at + zero, the kernel will assume that your boot loader does not support + the 2.02+ protocol. + +Field name: initrd_addr_max +Type: read +Offset/size: 0x22c/4 +Protocol: 2.03+ + + The maximum address that may be occupied by the initial + ramdisk/ramfs contents. For boot protocols 2.02 or earlier, this + field is not present, and the maximum address is 0x37FFFFFF. (This + address is defined as the address of the highest safe byte, so if + your ramdisk is exactly 131072 bytes long and this field is + 0x37FFFFFF, you can start your ramdisk at 0x37FE0000.) + +Field name: kernel_alignment +Type: read (reloc) +Offset/size: 0x230/4 +Protocol: 2.05+ + + Alignment unit required by the kernel (if relocatable_kernel is true.) + +Field name: relocatable_kernel +Type: read (reloc) +Offset/size: 0x234/1 +Protocol: 2.05+ + + If this field is nonzero, the protected-mode part of the kernel can + be loaded at any address that satisfies the kernel_alignment field. + After loading, the boot loader must set the code32_start field to + point to the loaded code, or to a boot loader hook. + +Field name: cmdline_size +Type: read +Offset/size: 0x238/4 +Protocol: 2.06+ + + The maximum size of the command line without the terminating + zero. This means that the command line can contain at most + cmdline_size characters. With protocol version 2.05 and earlier, the + maximum size was 255. + +Field name: hardware_subarch +Type: write (optional, defaults to x86/PC) +Offset/size: 0x23c/4 +Protocol: 2.07+ + + In a paravirtualized environment the hardware low level architectural + pieces such as interrupt handling, page table handling, and + accessing process control registers needs to be done differently. + + This field allows the bootloader to inform the kernel we are in one + one of those environments. + + 0x00000000 The default x86/PC environment + 0x00000001 lguest + 0x00000002 Xen + +Field name: hardware_subarch_data +Type: write (subarch-dependent) +Offset/size: 0x240/8 +Protocol: 2.07+ + + A pointer to data that is specific to hardware subarch + This field is currently unused for the default x86/PC environment, + do not modify. + +Field name: payload_offset +Type: read +Offset/size: 0x248/4 +Protocol: 2.08+ + + If non-zero then this field contains the offset from the end of the + real-mode code to the payload. + + The payload may be compressed. The format of both the compressed and + uncompressed data should be determined using the standard magic + numbers. Currently only gzip compressed ELF is used. + +Field name: payload_length +Type: read +Offset/size: 0x24c/4 +Protocol: 2.08+ + + The length of the payload. + +Field name: setup_data +Type: write (special) +Offset/size: 0x250/8 +Protocol: 2.09+ + + The 64-bit physical pointer to NULL terminated single linked list of + struct setup_data. This is used to define a more extensible boot + parameters passing mechanism. The definition of struct setup_data is + as follow: + + struct setup_data { + u64 next; + u32 type; + u32 len; + u8 data[0]; + }; + + Where, the next is a 64-bit physical pointer to the next node of + linked list, the next field of the last node is 0; the type is used + to identify the contents of data; the len is the length of data + field; the data holds the real payload. + + This list may be modified at a number of points during the bootup + process. Therefore, when modifying this list one should always make + sure to consider the case where the linked list already contains + entries. + + +**** THE IMAGE CHECKSUM + +From boot protocol version 2.08 onwards the CRC-32 is calculated over +the entire file using the characteristic polynomial 0x04C11DB7 and an +initial remainder of 0xffffffff. The checksum is appended to the +file; therefore the CRC of the file up to the limit specified in the +syssize field of the header is always 0. + + +**** THE KERNEL COMMAND LINE + +The kernel command line has become an important way for the boot +loader to communicate with the kernel. Some of its options are also +relevant to the boot loader itself, see "special command line options" +below. + +The kernel command line is a null-terminated string. The maximum +length can be retrieved from the field cmdline_size. Before protocol +version 2.06, the maximum was 255 characters. A string that is too +long will be automatically truncated by the kernel. + +If the boot protocol version is 2.02 or later, the address of the +kernel command line is given by the header field cmd_line_ptr (see +above.) This address can be anywhere between the end of the setup +heap and 0xA0000. + +If the protocol version is *not* 2.02 or higher, the kernel +command line is entered using the following protocol: + + At offset 0x0020 (word), "cmd_line_magic", enter the magic + number 0xA33F. + + At offset 0x0022 (word), "cmd_line_offset", enter the offset + of the kernel command line (relative to the start of the + real-mode kernel). + + The kernel command line *must* be within the memory region + covered by setup_move_size, so you may need to adjust this + field. + + +**** MEMORY LAYOUT OF THE REAL-MODE CODE + +The real-mode code requires a stack/heap to be set up, as well as +memory allocated for the kernel command line. This needs to be done +in the real-mode accessible memory in bottom megabyte. + +It should be noted that modern machines often have a sizable Extended +BIOS Data Area (EBDA). As a result, it is advisable to use as little +of the low megabyte as possible. + +Unfortunately, under the following circumstances the 0x90000 memory +segment has to be used: + + - When loading a zImage kernel ((loadflags & 0x01) == 0). + - When loading a 2.01 or earlier boot protocol kernel. + + -> For the 2.00 and 2.01 boot protocols, the real-mode code + can be loaded at another address, but it is internally + relocated to 0x90000. For the "old" protocol, the + real-mode code must be loaded at 0x90000. + +When loading at 0x90000, avoid using memory above 0x9a000. + +For boot protocol 2.02 or higher, the command line does not have to be +located in the same 64K segment as the real-mode setup code; it is +thus permitted to give the stack/heap the full 64K segment and locate +the command line above it. + +The kernel command line should not be located below the real-mode +code, nor should it be located in high memory. + + +**** SAMPLE BOOT CONFIGURATION + +As a sample configuration, assume the following layout of the real +mode segment: + + When loading below 0x90000, use the entire segment: + + 0x0000-0x7fff Real mode kernel + 0x8000-0xdfff Stack and heap + 0xe000-0xffff Kernel command line + + When loading at 0x90000 OR the protocol version is 2.01 or earlier: + + 0x0000-0x7fff Real mode kernel + 0x8000-0x97ff Stack and heap + 0x9800-0x9fff Kernel command line + +Such a boot loader should enter the following fields in the header: + + unsigned long base_ptr; /* base address for real-mode segment */ + + if ( setup_sects == 0 ) { + setup_sects = 4; + } + + if ( protocol >= 0x0200 ) { + type_of_loader = ; + if ( loading_initrd ) { + ramdisk_image = ; + ramdisk_size = ; + } + + if ( protocol >= 0x0202 && loadflags & 0x01 ) + heap_end = 0xe000; + else + heap_end = 0x9800; + + if ( protocol >= 0x0201 ) { + heap_end_ptr = heap_end - 0x200; + loadflags |= 0x80; /* CAN_USE_HEAP */ + } + + if ( protocol >= 0x0202 ) { + cmd_line_ptr = base_ptr + heap_end; + strcpy(cmd_line_ptr, cmdline); + } else { + cmd_line_magic = 0xA33F; + cmd_line_offset = heap_end; + setup_move_size = heap_end + strlen(cmdline)+1; + strcpy(base_ptr+cmd_line_offset, cmdline); + } + } else { + /* Very old kernel */ + + heap_end = 0x9800; + + cmd_line_magic = 0xA33F; + cmd_line_offset = heap_end; + + /* A very old kernel MUST have its real-mode code + loaded at 0x90000 */ + + if ( base_ptr != 0x90000 ) { + /* Copy the real-mode kernel */ + memcpy(0x90000, base_ptr, (setup_sects+1)*512); + base_ptr = 0x90000; /* Relocated */ + } + + strcpy(0x90000+cmd_line_offset, cmdline); + + /* It is recommended to clear memory up to the 32K mark */ + memset(0x90000 + (setup_sects+1)*512, 0, + (64-(setup_sects+1))*512); + } + + +**** LOADING THE REST OF THE KERNEL + +The 32-bit (non-real-mode) kernel starts at offset (setup_sects+1)*512 +in the kernel file (again, if setup_sects == 0 the real value is 4.) +It should be loaded at address 0x10000 for Image/zImage kernels and +0x100000 for bzImage kernels. + +The kernel is a bzImage kernel if the protocol >= 2.00 and the 0x01 +bit (LOAD_HIGH) in the loadflags field is set: + + is_bzImage = (protocol >= 0x0200) && (loadflags & 0x01); + load_address = is_bzImage ? 0x100000 : 0x10000; + +Note that Image/zImage kernels can be up to 512K in size, and thus use +the entire 0x10000-0x90000 range of memory. This means it is pretty +much a requirement for these kernels to load the real-mode part at +0x90000. bzImage kernels allow much more flexibility. + + +**** SPECIAL COMMAND LINE OPTIONS + +If the command line provided by the boot loader is entered by the +user, the user may expect the following command line options to work. +They should normally not be deleted from the kernel command line even +though not all of them are actually meaningful to the kernel. Boot +loader authors who need additional command line options for the boot +loader itself should get them registered in +Documentation/kernel-parameters.txt to make sure they will not +conflict with actual kernel options now or in the future. + + vga= + here is either an integer (in C notation, either + decimal, octal, or hexadecimal) or one of the strings + "normal" (meaning 0xFFFF), "ext" (meaning 0xFFFE) or "ask" + (meaning 0xFFFD). This value should be entered into the + vid_mode field, as it is used by the kernel before the command + line is parsed. + + mem= + is an integer in C notation optionally followed by + (case insensitive) K, M, G, T, P or E (meaning << 10, << 20, + << 30, << 40, << 50 or << 60). This specifies the end of + memory to the kernel. This affects the possible placement of + an initrd, since an initrd should be placed near end of + memory. Note that this is an option to *both* the kernel and + the bootloader! + + initrd= + An initrd should be loaded. The meaning of is + obviously bootloader-dependent, and some boot loaders + (e.g. LILO) do not have such a command. + +In addition, some boot loaders add the following options to the +user-specified command line: + + BOOT_IMAGE= + The boot image which was loaded. Again, the meaning of + is obviously bootloader-dependent. + + auto + The kernel was booted without explicit user intervention. + +If these options are added by the boot loader, it is highly +recommended that they are located *first*, before the user-specified +or configuration-specified command line. Otherwise, "init=/bin/sh" +gets confused by the "auto" option. + + +**** RUNNING THE KERNEL + +The kernel is started by jumping to the kernel entry point, which is +located at *segment* offset 0x20 from the start of the real mode +kernel. This means that if you loaded your real-mode kernel code at +0x90000, the kernel entry point is 9020:0000. + +At entry, ds = es = ss should point to the start of the real-mode +kernel code (0x9000 if the code is loaded at 0x90000), sp should be +set up properly, normally pointing to the top of the heap, and +interrupts should be disabled. Furthermore, to guard against bugs in +the kernel, it is recommended that the boot loader sets fs = gs = ds = +es = ss. + +In our example from above, we would do: + + /* Note: in the case of the "old" kernel protocol, base_ptr must + be == 0x90000 at this point; see the previous sample code */ + + seg = base_ptr >> 4; + + cli(); /* Enter with interrupts disabled! */ + + /* Set up the real-mode kernel stack */ + _SS = seg; + _SP = heap_end; + + _DS = _ES = _FS = _GS = seg; + jmp_far(seg+0x20, 0); /* Run the kernel */ + +If your boot sector accesses a floppy drive, it is recommended to +switch off the floppy motor before running the kernel, since the +kernel boot leaves interrupts off and thus the motor will not be +switched off, especially if the loaded kernel has the floppy driver as +a demand-loaded module! + + +**** ADVANCED BOOT LOADER HOOKS + +If the boot loader runs in a particularly hostile environment (such as +LOADLIN, which runs under DOS) it may be impossible to follow the +standard memory location requirements. Such a boot loader may use the +following hooks that, if set, are invoked by the kernel at the +appropriate time. The use of these hooks should probably be +considered an absolutely last resort! + +IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and +%edi across invocation. + + realmode_swtch: + A 16-bit real mode far subroutine invoked immediately before + entering protected mode. The default routine disables NMI, so + your routine should probably do so, too. + + code32_start: + A 32-bit flat-mode routine *jumped* to immediately after the + transition to protected mode, but before the kernel is + uncompressed. No segments, except CS, are guaranteed to be + set up (current kernels do, but older ones do not); you should + set them up to BOOT_DS (0x18) yourself. + + After completing your hook, you should jump to the address + that was in this field before your boot loader overwrote it + (relocated, if appropriate.) + + +**** 32-bit BOOT PROTOCOL + +For machine with some new BIOS other than legacy BIOS, such as EFI, +LinuxBIOS, etc, and kexec, the 16-bit real mode setup code in kernel +based on legacy BIOS can not be used, so a 32-bit boot protocol needs +to be defined. + +In 32-bit boot protocol, the first step in loading a Linux kernel +should be to setup the boot parameters (struct boot_params, +traditionally known as "zero page"). The memory for struct boot_params +should be allocated and initialized to all zero. Then the setup header +from offset 0x01f1 of kernel image on should be loaded into struct +boot_params and examined. The end of setup header can be calculated as +follow: + + 0x0202 + byte value at offset 0x0201 + +In addition to read/modify/write the setup header of the struct +boot_params as that of 16-bit boot protocol, the boot loader should +also fill the additional fields of the struct boot_params as that +described in zero-page.txt. + +After setupping the struct boot_params, the boot loader can load the +32/64-bit kernel in the same way as that of 16-bit boot protocol. + +In 32-bit boot protocol, the kernel is started by jumping to the +32-bit kernel entry point, which is the start address of loaded +32/64-bit kernel. + +At entry, the CPU must be in 32-bit protected mode with paging +disabled; a GDT must be loaded with the descriptors for selectors +__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat +segment; __BOOS_CS must have execute/read permission, and __BOOT_DS +must have read/write permission; CS must be __BOOT_CS and DS, ES, SS +must be __BOOT_DS; interrupt must be disabled; %esi must hold the base +address of the struct boot_params; %ebp, %edi and %ebx must be zero. diff --git a/Documentation/x86/i386/boot.txt b/Documentation/x86/i386/boot.txt deleted file mode 100644 index 147bfe511cd..00000000000 --- a/Documentation/x86/i386/boot.txt +++ /dev/null @@ -1,900 +0,0 @@ - THE LINUX/x86 BOOT PROTOCOL - --------------------------- - -On the x86 platform, the Linux kernel uses a rather complicated boot -convention. This has evolved partially due to historical aspects, as -well as the desire in the early days to have the kernel itself be a -bootable image, the complicated PC memory model and due to changed -expectations in the PC industry caused by the effective demise of -real-mode DOS as a mainstream operating system. - -Currently, the following versions of the Linux/x86 boot protocol exist. - -Old kernels: zImage/Image support only. Some very early kernels - may not even support a command line. - -Protocol 2.00: (Kernel 1.3.73) Added bzImage and initrd support, as - well as a formalized way to communicate between the - boot loader and the kernel. setup.S made relocatable, - although the traditional setup area still assumed - writable. - -Protocol 2.01: (Kernel 1.3.76) Added a heap overrun warning. - -Protocol 2.02: (Kernel 2.4.0-test3-pre3) New command line protocol. - Lower the conventional memory ceiling. No overwrite - of the traditional setup area, thus making booting - safe for systems which use the EBDA from SMM or 32-bit - BIOS entry points. zImage deprecated but still - supported. - -Protocol 2.03: (Kernel 2.4.18-pre1) Explicitly makes the highest possible - initrd address available to the bootloader. - -Protocol 2.04: (Kernel 2.6.14) Extend the syssize field to four bytes. - -Protocol 2.05: (Kernel 2.6.20) Make protected mode kernel relocatable. - Introduce relocatable_kernel and kernel_alignment fields. - -Protocol 2.06: (Kernel 2.6.22) Added a field that contains the size of - the boot command line. - -Protocol 2.07: (Kernel 2.6.24) Added paravirtualised boot protocol. - Introduced hardware_subarch and hardware_subarch_data - and KEEP_SEGMENTS flag in load_flags. - -Protocol 2.08: (Kernel 2.6.26) Added crc32 checksum and ELF format - payload. Introduced payload_offset and payload length - fields to aid in locating the payload. - -Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical - pointer to single linked list of struct setup_data. - -**** MEMORY LAYOUT - -The traditional memory map for the kernel loader, used for Image or -zImage kernels, typically looks like: - - | | -0A0000 +------------------------+ - | Reserved for BIOS | Do not use. Reserved for BIOS EBDA. -09A000 +------------------------+ - | Command line | - | Stack/heap | For use by the kernel real-mode code. -098000 +------------------------+ - | Kernel setup | The kernel real-mode code. -090200 +------------------------+ - | Kernel boot sector | The kernel legacy boot sector. -090000 +------------------------+ - | Protected-mode kernel | The bulk of the kernel image. -010000 +------------------------+ - | Boot loader | <- Boot sector entry point 0000:7C00 -001000 +------------------------+ - | Reserved for MBR/BIOS | -000800 +------------------------+ - | Typically used by MBR | -000600 +------------------------+ - | BIOS use only | -000000 +------------------------+ - - -When using bzImage, the protected-mode kernel was relocated to -0x100000 ("high memory"), and the kernel real-mode block (boot sector, -setup, and stack/heap) was made relocatable to any address between -0x10000 and end of low memory. Unfortunately, in protocols 2.00 and -2.01 the 0x90000+ memory range is still used internally by the kernel; -the 2.02 protocol resolves that problem. - -It is desirable to keep the "memory ceiling" -- the highest point in -low memory touched by the boot loader -- as low as possible, since -some newer BIOSes have begun to allocate some rather large amounts of -memory, called the Extended BIOS Data Area, near the top of low -memory. The boot loader should use the "INT 12h" BIOS call to verify -how much low memory is available. - -Unfortunately, if INT 12h reports that the amount of memory is too -low, there is usually nothing the boot loader can do but to report an -error to the user. The boot loader should therefore be designed to -take up as little space in low memory as it reasonably can. For -zImage or old bzImage kernels, which need data written into the -0x90000 segment, the boot loader should make sure not to use memory -above the 0x9A000 point; too many BIOSes will break above that point. - -For a modern bzImage kernel with boot protocol version >= 2.02, a -memory layout like the following is suggested: - - ~ ~ - | Protected-mode kernel | -100000 +------------------------+ - | I/O memory hole | -0A0000 +------------------------+ - | Reserved for BIOS | Leave as much as possible unused - ~ ~ - | Command line | (Can also be below the X+10000 mark) -X+10000 +------------------------+ - | Stack/heap | For use by the kernel real-mode code. -X+08000 +------------------------+ - | Kernel setup | The kernel real-mode code. - | Kernel boot sector | The kernel legacy boot sector. -X +------------------------+ - | Boot loader | <- Boot sector entry point 0000:7C00 -001000 +------------------------+ - | Reserved for MBR/BIOS | -000800 +------------------------+ - | Typically used by MBR | -000600 +------------------------+ - | BIOS use only | -000000 +------------------------+ - -... where the address X is as low as the design of the boot loader -permits. - - -**** THE REAL-MODE KERNEL HEADER - -In the following text, and anywhere in the kernel boot sequence, "a -sector" refers to 512 bytes. It is independent of the actual sector -size of the underlying medium. - -The first step in loading a Linux kernel should be to load the -real-mode code (boot sector and setup code) and then examine the -following header at offset 0x01f1. The real-mode code can total up to -32K, although the boot loader may choose to load only the first two -sectors (1K) and then examine the bootup sector size. - -The header looks like: - -Offset Proto Name Meaning -/Size - -01F1/1 ALL(1 setup_sects The size of the setup in sectors -01F2/2 ALL root_flags If set, the root is mounted readonly -01F4/4 2.04+(2 syssize The size of the 32-bit code in 16-byte paras -01F8/2 ALL ram_size DO NOT USE - for bootsect.S use only -01FA/2 ALL vid_mode Video mode control -01FC/2 ALL root_dev Default root device number -01FE/2 ALL boot_flag 0xAA55 magic number -0200/2 2.00+ jump Jump instruction -0202/4 2.00+ header Magic signature "HdrS" -0206/2 2.00+ version Boot protocol version supported -0208/4 2.00+ realmode_swtch Boot loader hook (see below) -020C/2 2.00+ start_sys The load-low segment (0x1000) (obsolete) -020E/2 2.00+ kernel_version Pointer to kernel version string -0210/1 2.00+ type_of_loader Boot loader identifier -0211/1 2.00+ loadflags Boot protocol option flags -0212/2 2.00+ setup_move_size Move to high memory size (used with hooks) -0214/4 2.00+ code32_start Boot loader hook (see below) -0218/4 2.00+ ramdisk_image initrd load address (set by boot loader) -021C/4 2.00+ ramdisk_size initrd size (set by boot loader) -0220/4 2.00+ bootsect_kludge DO NOT USE - for bootsect.S use only -0224/2 2.01+ heap_end_ptr Free memory after setup end -0226/2 N/A pad1 Unused -0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line -022C/4 2.03+ initrd_addr_max Highest legal initrd address -0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel -0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not -0235/3 N/A pad2 Unused -0238/4 2.06+ cmdline_size Maximum size of the kernel command line -023C/4 2.07+ hardware_subarch Hardware subarchitecture -0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data -0248/4 2.08+ payload_offset Offset of kernel payload -024C/4 2.08+ payload_length Length of kernel payload -0250/8 2.09+ setup_data 64-bit physical pointer to linked list - of struct setup_data - -(1) For backwards compatibility, if the setup_sects field contains 0, the - real value is 4. - -(2) For boot protocol prior to 2.04, the upper two bytes of the syssize - field are unusable, which means the size of a bzImage kernel - cannot be determined. - -If the "HdrS" (0x53726448) magic number is not found at offset 0x202, -the boot protocol version is "old". Loading an old kernel, the -following parameters should be assumed: - - Image type = zImage - initrd not supported - Real-mode kernel must be located at 0x90000. - -Otherwise, the "version" field contains the protocol version, -e.g. protocol version 2.01 will contain 0x0201 in this field. When -setting fields in the header, you must make sure only to set fields -supported by the protocol version in use. - - -**** DETAILS OF HEADER FIELDS - -For each field, some are information from the kernel to the bootloader -("read"), some are expected to be filled out by the bootloader -("write"), and some are expected to be read and modified by the -bootloader ("modify"). - -All general purpose boot loaders should write the fields marked -(obligatory). Boot loaders who want to load the kernel at a -nonstandard address should fill in the fields marked (reloc); other -boot loaders can ignore those fields. - -The byte order of all fields is littleendian (this is x86, after all.) - -Field name: setup_sects -Type: read -Offset/size: 0x1f1/1 -Protocol: ALL - - The size of the setup code in 512-byte sectors. If this field is - 0, the real value is 4. The real-mode code consists of the boot - sector (always one 512-byte sector) plus the setup code. - -Field name: root_flags -Type: modify (optional) -Offset/size: 0x1f2/2 -Protocol: ALL - - If this field is nonzero, the root defaults to readonly. The use of - this field is deprecated; use the "ro" or "rw" options on the - command line instead. - -Field name: syssize -Type: read -Offset/size: 0x1f4/4 (protocol 2.04+) 0x1f4/2 (protocol ALL) -Protocol: 2.04+ - - The size of the protected-mode code in units of 16-byte paragraphs. - For protocol versions older than 2.04 this field is only two bytes - wide, and therefore cannot be trusted for the size of a kernel if - the LOAD_HIGH flag is set. - -Field name: ram_size -Type: kernel internal -Offset/size: 0x1f8/2 -Protocol: ALL - - This field is obsolete. - -Field name: vid_mode -Type: modify (obligatory) -Offset/size: 0x1fa/2 - - Please see the section on SPECIAL COMMAND LINE OPTIONS. - -Field name: root_dev -Type: modify (optional) -Offset/size: 0x1fc/2 -Protocol: ALL - - The default root device device number. The use of this field is - deprecated, use the "root=" option on the command line instead. - -Field name: boot_flag -Type: read -Offset/size: 0x1fe/2 -Protocol: ALL - - Contains 0xAA55. This is the closest thing old Linux kernels have - to a magic number. - -Field name: jump -Type: read -Offset/size: 0x200/2 -Protocol: 2.00+ - - Contains an x86 jump instruction, 0xEB followed by a signed offset - relative to byte 0x202. This can be used to determine the size of - the header. - -Field name: header -Type: read -Offset/size: 0x202/4 -Protocol: 2.00+ - - Contains the magic number "HdrS" (0x53726448). - -Field name: version -Type: read -Offset/size: 0x206/2 -Protocol: 2.00+ - - Contains the boot protocol version, in (major << 8)+minor format, - e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version - 10.17. - -Field name: readmode_swtch -Type: modify (optional) -Offset/size: 0x208/4 -Protocol: 2.00+ - - Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) - -Field name: start_sys -Type: read -Offset/size: 0x20c/4 -Protocol: 2.00+ - - The load low segment (0x1000). Obsolete. - -Field name: kernel_version -Type: read -Offset/size: 0x20e/2 -Protocol: 2.00+ - - If set to a nonzero value, contains a pointer to a NUL-terminated - human-readable kernel version number string, less 0x200. This can - be used to display the kernel version to the user. This value - should be less than (0x200*setup_sects). - - For example, if this value is set to 0x1c00, the kernel version - number string can be found at offset 0x1e00 in the kernel file. - This is a valid value if and only if the "setup_sects" field - contains the value 15 or higher, as: - - 0x1c00 < 15*0x200 (= 0x1e00) but - 0x1c00 >= 14*0x200 (= 0x1c00) - - 0x1c00 >> 9 = 14, so the minimum value for setup_secs is 15. - -Field name: type_of_loader -Type: write (obligatory) -Offset/size: 0x210/1 -Protocol: 2.00+ - - If your boot loader has an assigned id (see table below), enter - 0xTV here, where T is an identifier for the boot loader and V is - a version number. Otherwise, enter 0xFF here. - - Assigned boot loader ids: - 0 LILO (0x00 reserved for pre-2.00 bootloader) - 1 Loadlin - 2 bootsect-loader (0x20, all other values reserved) - 3 SYSLINUX - 4 EtherBoot - 5 ELILO - 7 GRuB - 8 U-BOOT - 9 Xen - A Gujin - B Qemu - - Please contact if you need a bootloader ID - value assigned. - -Field name: loadflags -Type: modify (obligatory) -Offset/size: 0x211/1 -Protocol: 2.00+ - - This field is a bitmask. - - Bit 0 (read): LOADED_HIGH - - If 0, the protected-mode code is loaded at 0x10000. - - If 1, the protected-mode code is loaded at 0x100000. - - Bit 5 (write): QUIET_FLAG - - If 0, print early messages. - - If 1, suppress early messages. - This requests to the kernel (decompressor and early - kernel) to not write early messages that require - accessing the display hardware directly. - - Bit 6 (write): KEEP_SEGMENTS - Protocol: 2.07+ - - If 0, reload the segment registers in the 32bit entry point. - - If 1, do not reload the segment registers in the 32bit entry point. - Assume that %cs %ds %ss %es are all set to flat segments with - a base of 0 (or the equivalent for their environment). - - Bit 7 (write): CAN_USE_HEAP - Set this bit to 1 to indicate that the value entered in the - heap_end_ptr is valid. If this field is clear, some setup code - functionality will be disabled. - -Field name: setup_move_size -Type: modify (obligatory) -Offset/size: 0x212/2 -Protocol: 2.00-2.01 - - When using protocol 2.00 or 2.01, if the real mode kernel is not - loaded at 0x90000, it gets moved there later in the loading - sequence. Fill in this field if you want additional data (such as - the kernel command line) moved in addition to the real-mode kernel - itself. - - The unit is bytes starting with the beginning of the boot sector. - - This field is can be ignored when the protocol is 2.02 or higher, or - if the real-mode code is loaded at 0x90000. - -Field name: code32_start -Type: modify (optional, reloc) -Offset/size: 0x214/4 -Protocol: 2.00+ - - The address to jump to in protected mode. This defaults to the load - address of the kernel, and can be used by the boot loader to - determine the proper load address. - - This field can be modified for two purposes: - - 1. as a boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) - - 2. if a bootloader which does not install a hook loads a - relocatable kernel at a nonstandard address it will have to modify - this field to point to the load address. - -Field name: ramdisk_image -Type: write (obligatory) -Offset/size: 0x218/4 -Protocol: 2.00+ - - The 32-bit linear address of the initial ramdisk or ramfs. Leave at - zero if there is no initial ramdisk/ramfs. - -Field name: ramdisk_size -Type: write (obligatory) -Offset/size: 0x21c/4 -Protocol: 2.00+ - - Size of the initial ramdisk or ramfs. Leave at zero if there is no - initial ramdisk/ramfs. - -Field name: bootsect_kludge -Type: kernel internal -Offset/size: 0x220/4 -Protocol: 2.00+ - - This field is obsolete. - -Field name: heap_end_ptr -Type: write (obligatory) -Offset/size: 0x224/2 -Protocol: 2.01+ - - Set this field to the offset (from the beginning of the real-mode - code) of the end of the setup stack/heap, minus 0x0200. - -Field name: cmd_line_ptr -Type: write (obligatory) -Offset/size: 0x228/4 -Protocol: 2.02+ - - Set this field to the linear address of the kernel command line. - The kernel command line can be located anywhere between the end of - the setup heap and 0xA0000; it does not have to be located in the - same 64K segment as the real-mode code itself. - - Fill in this field even if your boot loader does not support a - command line, in which case you can point this to an empty string - (or better yet, to the string "auto".) If this field is left at - zero, the kernel will assume that your boot loader does not support - the 2.02+ protocol. - -Field name: initrd_addr_max -Type: read -Offset/size: 0x22c/4 -Protocol: 2.03+ - - The maximum address that may be occupied by the initial - ramdisk/ramfs contents. For boot protocols 2.02 or earlier, this - field is not present, and the maximum address is 0x37FFFFFF. (This - address is defined as the address of the highest safe byte, so if - your ramdisk is exactly 131072 bytes long and this field is - 0x37FFFFFF, you can start your ramdisk at 0x37FE0000.) - -Field name: kernel_alignment -Type: read (reloc) -Offset/size: 0x230/4 -Protocol: 2.05+ - - Alignment unit required by the kernel (if relocatable_kernel is true.) - -Field name: relocatable_kernel -Type: read (reloc) -Offset/size: 0x234/1 -Protocol: 2.05+ - - If this field is nonzero, the protected-mode part of the kernel can - be loaded at any address that satisfies the kernel_alignment field. - After loading, the boot loader must set the code32_start field to - point to the loaded code, or to a boot loader hook. - -Field name: cmdline_size -Type: read -Offset/size: 0x238/4 -Protocol: 2.06+ - - The maximum size of the command line without the terminating - zero. This means that the command line can contain at most - cmdline_size characters. With protocol version 2.05 and earlier, the - maximum size was 255. - -Field name: hardware_subarch -Type: write (optional, defaults to x86/PC) -Offset/size: 0x23c/4 -Protocol: 2.07+ - - In a paravirtualized environment the hardware low level architectural - pieces such as interrupt handling, page table handling, and - accessing process control registers needs to be done differently. - - This field allows the bootloader to inform the kernel we are in one - one of those environments. - - 0x00000000 The default x86/PC environment - 0x00000001 lguest - 0x00000002 Xen - -Field name: hardware_subarch_data -Type: write (subarch-dependent) -Offset/size: 0x240/8 -Protocol: 2.07+ - - A pointer to data that is specific to hardware subarch - This field is currently unused for the default x86/PC environment, - do not modify. - -Field name: payload_offset -Type: read -Offset/size: 0x248/4 -Protocol: 2.08+ - - If non-zero then this field contains the offset from the end of the - real-mode code to the payload. - - The payload may be compressed. The format of both the compressed and - uncompressed data should be determined using the standard magic - numbers. Currently only gzip compressed ELF is used. - -Field name: payload_length -Type: read -Offset/size: 0x24c/4 -Protocol: 2.08+ - - The length of the payload. - -Field name: setup_data -Type: write (special) -Offset/size: 0x250/8 -Protocol: 2.09+ - - The 64-bit physical pointer to NULL terminated single linked list of - struct setup_data. This is used to define a more extensible boot - parameters passing mechanism. The definition of struct setup_data is - as follow: - - struct setup_data { - u64 next; - u32 type; - u32 len; - u8 data[0]; - }; - - Where, the next is a 64-bit physical pointer to the next node of - linked list, the next field of the last node is 0; the type is used - to identify the contents of data; the len is the length of data - field; the data holds the real payload. - - This list may be modified at a number of points during the bootup - process. Therefore, when modifying this list one should always make - sure to consider the case where the linked list already contains - entries. - - -**** THE IMAGE CHECKSUM - -From boot protocol version 2.08 onwards the CRC-32 is calculated over -the entire file using the characteristic polynomial 0x04C11DB7 and an -initial remainder of 0xffffffff. The checksum is appended to the -file; therefore the CRC of the file up to the limit specified in the -syssize field of the header is always 0. - - -**** THE KERNEL COMMAND LINE - -The kernel command line has become an important way for the boot -loader to communicate with the kernel. Some of its options are also -relevant to the boot loader itself, see "special command line options" -below. - -The kernel command line is a null-terminated string. The maximum -length can be retrieved from the field cmdline_size. Before protocol -version 2.06, the maximum was 255 characters. A string that is too -long will be automatically truncated by the kernel. - -If the boot protocol version is 2.02 or later, the address of the -kernel command line is given by the header field cmd_line_ptr (see -above.) This address can be anywhere between the end of the setup -heap and 0xA0000. - -If the protocol version is *not* 2.02 or higher, the kernel -command line is entered using the following protocol: - - At offset 0x0020 (word), "cmd_line_magic", enter the magic - number 0xA33F. - - At offset 0x0022 (word), "cmd_line_offset", enter the offset - of the kernel command line (relative to the start of the - real-mode kernel). - - The kernel command line *must* be within the memory region - covered by setup_move_size, so you may need to adjust this - field. - - -**** MEMORY LAYOUT OF THE REAL-MODE CODE - -The real-mode code requires a stack/heap to be set up, as well as -memory allocated for the kernel command line. This needs to be done -in the real-mode accessible memory in bottom megabyte. - -It should be noted that modern machines often have a sizable Extended -BIOS Data Area (EBDA). As a result, it is advisable to use as little -of the low megabyte as possible. - -Unfortunately, under the following circumstances the 0x90000 memory -segment has to be used: - - - When loading a zImage kernel ((loadflags & 0x01) == 0). - - When loading a 2.01 or earlier boot protocol kernel. - - -> For the 2.00 and 2.01 boot protocols, the real-mode code - can be loaded at another address, but it is internally - relocated to 0x90000. For the "old" protocol, the - real-mode code must be loaded at 0x90000. - -When loading at 0x90000, avoid using memory above 0x9a000. - -For boot protocol 2.02 or higher, the command line does not have to be -located in the same 64K segment as the real-mode setup code; it is -thus permitted to give the stack/heap the full 64K segment and locate -the command line above it. - -The kernel command line should not be located below the real-mode -code, nor should it be located in high memory. - - -**** SAMPLE BOOT CONFIGURATION - -As a sample configuration, assume the following layout of the real -mode segment: - - When loading below 0x90000, use the entire segment: - - 0x0000-0x7fff Real mode kernel - 0x8000-0xdfff Stack and heap - 0xe000-0xffff Kernel command line - - When loading at 0x90000 OR the protocol version is 2.01 or earlier: - - 0x0000-0x7fff Real mode kernel - 0x8000-0x97ff Stack and heap - 0x9800-0x9fff Kernel command line - -Such a boot loader should enter the following fields in the header: - - unsigned long base_ptr; /* base address for real-mode segment */ - - if ( setup_sects == 0 ) { - setup_sects = 4; - } - - if ( protocol >= 0x0200 ) { - type_of_loader = ; - if ( loading_initrd ) { - ramdisk_image = ; - ramdisk_size = ; - } - - if ( protocol >= 0x0202 && loadflags & 0x01 ) - heap_end = 0xe000; - else - heap_end = 0x9800; - - if ( protocol >= 0x0201 ) { - heap_end_ptr = heap_end - 0x200; - loadflags |= 0x80; /* CAN_USE_HEAP */ - } - - if ( protocol >= 0x0202 ) { - cmd_line_ptr = base_ptr + heap_end; - strcpy(cmd_line_ptr, cmdline); - } else { - cmd_line_magic = 0xA33F; - cmd_line_offset = heap_end; - setup_move_size = heap_end + strlen(cmdline)+1; - strcpy(base_ptr+cmd_line_offset, cmdline); - } - } else { - /* Very old kernel */ - - heap_end = 0x9800; - - cmd_line_magic = 0xA33F; - cmd_line_offset = heap_end; - - /* A very old kernel MUST have its real-mode code - loaded at 0x90000 */ - - if ( base_ptr != 0x90000 ) { - /* Copy the real-mode kernel */ - memcpy(0x90000, base_ptr, (setup_sects+1)*512); - base_ptr = 0x90000; /* Relocated */ - } - - strcpy(0x90000+cmd_line_offset, cmdline); - - /* It is recommended to clear memory up to the 32K mark */ - memset(0x90000 + (setup_sects+1)*512, 0, - (64-(setup_sects+1))*512); - } - - -**** LOADING THE REST OF THE KERNEL - -The 32-bit (non-real-mode) kernel starts at offset (setup_sects+1)*512 -in the kernel file (again, if setup_sects == 0 the real value is 4.) -It should be loaded at address 0x10000 for Image/zImage kernels and -0x100000 for bzImage kernels. - -The kernel is a bzImage kernel if the protocol >= 2.00 and the 0x01 -bit (LOAD_HIGH) in the loadflags field is set: - - is_bzImage = (protocol >= 0x0200) && (loadflags & 0x01); - load_address = is_bzImage ? 0x100000 : 0x10000; - -Note that Image/zImage kernels can be up to 512K in size, and thus use -the entire 0x10000-0x90000 range of memory. This means it is pretty -much a requirement for these kernels to load the real-mode part at -0x90000. bzImage kernels allow much more flexibility. - - -**** SPECIAL COMMAND LINE OPTIONS - -If the command line provided by the boot loader is entered by the -user, the user may expect the following command line options to work. -They should normally not be deleted from the kernel command line even -though not all of them are actually meaningful to the kernel. Boot -loader authors who need additional command line options for the boot -loader itself should get them registered in -Documentation/kernel-parameters.txt to make sure they will not -conflict with actual kernel options now or in the future. - - vga= - here is either an integer (in C notation, either - decimal, octal, or hexadecimal) or one of the strings - "normal" (meaning 0xFFFF), "ext" (meaning 0xFFFE) or "ask" - (meaning 0xFFFD). This value should be entered into the - vid_mode field, as it is used by the kernel before the command - line is parsed. - - mem= - is an integer in C notation optionally followed by - (case insensitive) K, M, G, T, P or E (meaning << 10, << 20, - << 30, << 40, << 50 or << 60). This specifies the end of - memory to the kernel. This affects the possible placement of - an initrd, since an initrd should be placed near end of - memory. Note that this is an option to *both* the kernel and - the bootloader! - - initrd= - An initrd should be loaded. The meaning of is - obviously bootloader-dependent, and some boot loaders - (e.g. LILO) do not have such a command. - -In addition, some boot loaders add the following options to the -user-specified command line: - - BOOT_IMAGE= - The boot image which was loaded. Again, the meaning of - is obviously bootloader-dependent. - - auto - The kernel was booted without explicit user intervention. - -If these options are added by the boot loader, it is highly -recommended that they are located *first*, before the user-specified -or configuration-specified command line. Otherwise, "init=/bin/sh" -gets confused by the "auto" option. - - -**** RUNNING THE KERNEL - -The kernel is started by jumping to the kernel entry point, which is -located at *segment* offset 0x20 from the start of the real mode -kernel. This means that if you loaded your real-mode kernel code at -0x90000, the kernel entry point is 9020:0000. - -At entry, ds = es = ss should point to the start of the real-mode -kernel code (0x9000 if the code is loaded at 0x90000), sp should be -set up properly, normally pointing to the top of the heap, and -interrupts should be disabled. Furthermore, to guard against bugs in -the kernel, it is recommended that the boot loader sets fs = gs = ds = -es = ss. - -In our example from above, we would do: - - /* Note: in the case of the "old" kernel protocol, base_ptr must - be == 0x90000 at this point; see the previous sample code */ - - seg = base_ptr >> 4; - - cli(); /* Enter with interrupts disabled! */ - - /* Set up the real-mode kernel stack */ - _SS = seg; - _SP = heap_end; - - _DS = _ES = _FS = _GS = seg; - jmp_far(seg+0x20, 0); /* Run the kernel */ - -If your boot sector accesses a floppy drive, it is recommended to -switch off the floppy motor before running the kernel, since the -kernel boot leaves interrupts off and thus the motor will not be -switched off, especially if the loaded kernel has the floppy driver as -a demand-loaded module! - - -**** ADVANCED BOOT LOADER HOOKS - -If the boot loader runs in a particularly hostile environment (such as -LOADLIN, which runs under DOS) it may be impossible to follow the -standard memory location requirements. Such a boot loader may use the -following hooks that, if set, are invoked by the kernel at the -appropriate time. The use of these hooks should probably be -considered an absolutely last resort! - -IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and -%edi across invocation. - - realmode_swtch: - A 16-bit real mode far subroutine invoked immediately before - entering protected mode. The default routine disables NMI, so - your routine should probably do so, too. - - code32_start: - A 32-bit flat-mode routine *jumped* to immediately after the - transition to protected mode, but before the kernel is - uncompressed. No segments, except CS, are guaranteed to be - set up (current kernels do, but older ones do not); you should - set them up to BOOT_DS (0x18) yourself. - - After completing your hook, you should jump to the address - that was in this field before your boot loader overwrote it - (relocated, if appropriate.) - - -**** 32-bit BOOT PROTOCOL - -For machine with some new BIOS other than legacy BIOS, such as EFI, -LinuxBIOS, etc, and kexec, the 16-bit real mode setup code in kernel -based on legacy BIOS can not be used, so a 32-bit boot protocol needs -to be defined. - -In 32-bit boot protocol, the first step in loading a Linux kernel -should be to setup the boot parameters (struct boot_params, -traditionally known as "zero page"). The memory for struct boot_params -should be allocated and initialized to all zero. Then the setup header -from offset 0x01f1 of kernel image on should be loaded into struct -boot_params and examined. The end of setup header can be calculated as -follow: - - 0x0202 + byte value at offset 0x0201 - -In addition to read/modify/write the setup header of the struct -boot_params as that of 16-bit boot protocol, the boot loader should -also fill the additional fields of the struct boot_params as that -described in zero-page.txt. - -After setupping the struct boot_params, the boot loader can load the -32/64-bit kernel in the same way as that of 16-bit boot protocol. - -In 32-bit boot protocol, the kernel is started by jumping to the -32-bit kernel entry point, which is the start address of loaded -32/64-bit kernel. - -At entry, the CPU must be in 32-bit protected mode with paging -disabled; a GDT must be loaded with the descriptors for selectors -__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat -segment; __BOOS_CS must have execute/read permission, and __BOOT_DS -must have read/write permission; CS must be __BOOT_CS and DS, ES, SS -must be __BOOT_DS; interrupt must be disabled; %esi must hold the base -address of the struct boot_params; %ebp, %edi and %ebx must be zero. diff --git a/Documentation/x86/i386/usb-legacy-support.txt b/Documentation/x86/i386/usb-legacy-support.txt deleted file mode 100644 index 1894cdfc69d..00000000000 --- a/Documentation/x86/i386/usb-legacy-support.txt +++ /dev/null @@ -1,44 +0,0 @@ -USB Legacy support -~~~~~~~~~~~~~~~~~~ - -Vojtech Pavlik , January 2004 - - -Also known as "USB Keyboard" or "USB Mouse support" in the BIOS Setup is a -feature that allows one to use the USB mouse and keyboard as if they were -their classic PS/2 counterparts. This means one can use an USB keyboard to -type in LILO for example. - -It has several drawbacks, though: - -1) On some machines, the emulated PS/2 mouse takes over even when no USB - mouse is present and a real PS/2 mouse is present. In that case the extra - features (wheel, extra buttons, touchpad mode) of the real PS/2 mouse may - not be available. - -2) If CONFIG_HIGHMEM64G is enabled, the PS/2 mouse emulation can cause - system crashes, because the SMM BIOS is not expecting to be in PAE mode. - The Intel E7505 is a typical machine where this happens. - -3) If AMD64 64-bit mode is enabled, again system crashes often happen, - because the SMM BIOS isn't expecting the CPU to be in 64-bit mode. The - BIOS manufacturers only test with Windows, and Windows doesn't do 64-bit - yet. - -Solutions: - -Problem 1) can be solved by loading the USB drivers prior to loading the -PS/2 mouse driver. Since the PS/2 mouse driver is in 2.6 compiled into -the kernel unconditionally, this means the USB drivers need to be -compiled-in, too. - -Problem 2) can currently only be solved by either disabling HIGHMEM64G -in the kernel config or USB Legacy support in the BIOS. A BIOS update -could help, but so far no such update exists. - -Problem 3) is usually fixed by a BIOS update. Check the board -manufacturers web site. If an update is not available, disable USB -Legacy support in the BIOS. If this alone doesn't help, try also adding -idle=poll on the kernel command line. The BIOS may be entering the SMM -on the HLT instruction as well. - diff --git a/Documentation/x86/i386/zero-page.txt b/Documentation/x86/i386/zero-page.txt deleted file mode 100644 index 169ad423a3d..00000000000 --- a/Documentation/x86/i386/zero-page.txt +++ /dev/null @@ -1,31 +0,0 @@ -The additional fields in struct boot_params as a part of 32-bit boot -protocol of kernel. These should be filled by bootloader or 16-bit -real-mode setup code of the kernel. References/settings to it mainly -are in: - - include/asm-x86/bootparam.h - - -Offset Proto Name Meaning -/Size - -000/040 ALL screen_info Text mode or frame buffer information - (struct screen_info) -040/014 ALL apm_bios_info APM BIOS information (struct apm_bios_info) -060/010 ALL ist_info Intel SpeedStep (IST) BIOS support information - (struct ist_info) -080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!! -090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!! -0A0/010 ALL sys_desc_table System description table (struct sys_desc_table) -140/080 ALL edid_info Video mode setup (struct edid_info) -1C0/020 ALL efi_info EFI 32 information (struct efi_info) -1E0/004 ALL alk_mem_k Alternative mem check, in KB -1E4/004 ALL scratch Scratch field for the kernel setup code -1E8/001 ALL e820_entries Number of entries in e820_map (below) -1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) -1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer - (below) -290/040 ALL edd_mbr_sig_buffer EDD MBR signatures -2D0/A00 ALL e820_map E820 memory map table - (array of struct e820entry) -D00/1EC ALL eddbuf EDD data (array of struct edd_info) diff --git a/Documentation/x86/usb-legacy-support.txt b/Documentation/x86/usb-legacy-support.txt new file mode 100644 index 00000000000..1894cdfc69d --- /dev/null +++ b/Documentation/x86/usb-legacy-support.txt @@ -0,0 +1,44 @@ +USB Legacy support +~~~~~~~~~~~~~~~~~~ + +Vojtech Pavlik , January 2004 + + +Also known as "USB Keyboard" or "USB Mouse support" in the BIOS Setup is a +feature that allows one to use the USB mouse and keyboard as if they were +their classic PS/2 counterparts. This means one can use an USB keyboard to +type in LILO for example. + +It has several drawbacks, though: + +1) On some machines, the emulated PS/2 mouse takes over even when no USB + mouse is present and a real PS/2 mouse is present. In that case the extra + features (wheel, extra buttons, touchpad mode) of the real PS/2 mouse may + not be available. + +2) If CONFIG_HIGHMEM64G is enabled, the PS/2 mouse emulation can cause + system crashes, because the SMM BIOS is not expecting to be in PAE mode. + The Intel E7505 is a typical machine where this happens. + +3) If AMD64 64-bit mode is enabled, again system crashes often happen, + because the SMM BIOS isn't expecting the CPU to be in 64-bit mode. The + BIOS manufacturers only test with Windows, and Windows doesn't do 64-bit + yet. + +Solutions: + +Problem 1) can be solved by loading the USB drivers prior to loading the +PS/2 mouse driver. Since the PS/2 mouse driver is in 2.6 compiled into +the kernel unconditionally, this means the USB drivers need to be +compiled-in, too. + +Problem 2) can currently only be solved by either disabling HIGHMEM64G +in the kernel config or USB Legacy support in the BIOS. A BIOS update +could help, but so far no such update exists. + +Problem 3) is usually fixed by a BIOS update. Check the board +manufacturers web site. If an update is not available, disable USB +Legacy support in the BIOS. If this alone doesn't help, try also adding +idle=poll on the kernel command line. The BIOS may be entering the SMM +on the HLT instruction as well. + diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt new file mode 100644 index 00000000000..169ad423a3d --- /dev/null +++ b/Documentation/x86/zero-page.txt @@ -0,0 +1,31 @@ +The additional fields in struct boot_params as a part of 32-bit boot +protocol of kernel. These should be filled by bootloader or 16-bit +real-mode setup code of the kernel. References/settings to it mainly +are in: + + include/asm-x86/bootparam.h + + +Offset Proto Name Meaning +/Size + +000/040 ALL screen_info Text mode or frame buffer information + (struct screen_info) +040/014 ALL apm_bios_info APM BIOS information (struct apm_bios_info) +060/010 ALL ist_info Intel SpeedStep (IST) BIOS support information + (struct ist_info) +080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!! +090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!! +0A0/010 ALL sys_desc_table System description table (struct sys_desc_table) +140/080 ALL edid_info Video mode setup (struct edid_info) +1C0/020 ALL efi_info EFI 32 information (struct efi_info) +1E0/004 ALL alk_mem_k Alternative mem check, in KB +1E4/004 ALL scratch Scratch field for the kernel setup code +1E8/001 ALL e820_entries Number of entries in e820_map (below) +1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) +1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer + (below) +290/040 ALL edd_mbr_sig_buffer EDD MBR signatures +2D0/A00 ALL e820_map E820 memory map table + (array of struct e820entry) +D00/1EC ALL eddbuf EDD data (array of struct edd_info) -- cgit v1.2.3-70-g09d2 From a021e5124a6c57325ffb02a60cd1d5f40342f8aa Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 22 Jul 2008 15:33:57 -0400 Subject: x86: doc: boot.txt: fix the size of the start_sys field The start_sys field is two bytes, not four. Signed-off-by: H. Peter Anvin --- Documentation/x86/boot.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 147bfe511cd..83c0033ee9e 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -308,7 +308,7 @@ Protocol: 2.00+ Field name: start_sys Type: read -Offset/size: 0x20c/4 +Offset/size: 0x20c/2 Protocol: 2.00+ The load low segment (0x1000). Obsolete. -- cgit v1.2.3-70-g09d2 From a300bec952127d9a15e666b391bb35c9aecb3002 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 22 Jul 2008 09:46:13 -0700 Subject: documentation: move hpet.txt to timers/ subdirectory Move hpet.txt to Documentation/timers/ subdirectory. Add 00-INDEX to Documentation/timers/ subdirectory. Signed-off-by: Randy Dunlap Cc: tglx Signed-off-by: Thomas Gleixner --- Documentation/00-INDEX | 2 - Documentation/hpet.txt | 300 ------------------------------------------ Documentation/timers/00-INDEX | 10 ++ Documentation/timers/hpet.txt | 300 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 310 insertions(+), 302 deletions(-) delete mode 100644 Documentation/hpet.txt create mode 100644 Documentation/timers/00-INDEX create mode 100644 Documentation/timers/hpet.txt (limited to 'Documentation') diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 1977fab3865..6c40c4c300d 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -161,8 +161,6 @@ hayes-esp.txt - info on using the Hayes ESP serial driver. highuid.txt - notes on the change from 16 bit to 32 bit user/group IDs. -hpet.txt - - High Precision Event Timer Driver for Linux. timers/ - info on the timer related topics hw_random.txt diff --git a/Documentation/hpet.txt b/Documentation/hpet.txt deleted file mode 100644 index 6ad52d9dad6..00000000000 --- a/Documentation/hpet.txt +++ /dev/null @@ -1,300 +0,0 @@ - High Precision Event Timer Driver for Linux - -The High Precision Event Timer (HPET) hardware is the future replacement -for the 8254 and Real Time Clock (RTC) periodic timer functionality. -Each HPET can have up to 32 timers. It is possible to configure the -first two timers as legacy replacements for 8254 and RTC periodic timers. -A specification done by Intel and Microsoft can be found at -. - -The driver supports detection of HPET driver allocation and initialization -of the HPET before the driver module_init routine is called. This enables -platform code which uses timer 0 or 1 as the main timer to intercept HPET -initialization. An example of this initialization can be found in -arch/i386/kernel/time_hpet.c. - -The driver provides two APIs which are very similar to the API found in -the rtc.c driver. There is a user space API and a kernel space API. -An example user space program is provided below. - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -extern void hpet_open_close(int, const char **); -extern void hpet_info(int, const char **); -extern void hpet_poll(int, const char **); -extern void hpet_fasync(int, const char **); -extern void hpet_read(int, const char **); - -#include -#include -#include - -struct hpet_command { - char *command; - void (*func)(int argc, const char ** argv); -} hpet_command[] = { - { - "open-close", - hpet_open_close - }, - { - "info", - hpet_info - }, - { - "poll", - hpet_poll - }, - { - "fasync", - hpet_fasync - }, -}; - -int -main(int argc, const char ** argv) -{ - int i; - - argc--; - argv++; - - if (!argc) { - fprintf(stderr, "-hpet: requires command\n"); - return -1; - } - - - for (i = 0; i < (sizeof (hpet_command) / sizeof (hpet_command[0])); i++) - if (!strcmp(argv[0], hpet_command[i].command)) { - argc--; - argv++; - fprintf(stderr, "-hpet: executing %s\n", - hpet_command[i].command); - hpet_command[i].func(argc, argv); - return 0; - } - - fprintf(stderr, "do_hpet: command %s not implemented\n", argv[0]); - - return -1; -} - -void -hpet_open_close(int argc, const char **argv) -{ - int fd; - - if (argc != 1) { - fprintf(stderr, "hpet_open_close: device-name\n"); - return; - } - - fd = open(argv[0], O_RDONLY); - if (fd < 0) - fprintf(stderr, "hpet_open_close: open failed\n"); - else - close(fd); - - return; -} - -void -hpet_info(int argc, const char **argv) -{ -} - -void -hpet_poll(int argc, const char **argv) -{ - unsigned long freq; - int iterations, i, fd; - struct pollfd pfd; - struct hpet_info info; - struct timeval stv, etv; - struct timezone tz; - long usec; - - if (argc != 3) { - fprintf(stderr, "hpet_poll: device-name freq iterations\n"); - return; - } - - freq = atoi(argv[1]); - iterations = atoi(argv[2]); - - fd = open(argv[0], O_RDONLY); - - if (fd < 0) { - fprintf(stderr, "hpet_poll: open of %s failed\n", argv[0]); - return; - } - - if (ioctl(fd, HPET_IRQFREQ, freq) < 0) { - fprintf(stderr, "hpet_poll: HPET_IRQFREQ failed\n"); - goto out; - } - - if (ioctl(fd, HPET_INFO, &info) < 0) { - fprintf(stderr, "hpet_poll: failed to get info\n"); - goto out; - } - - fprintf(stderr, "hpet_poll: info.hi_flags 0x%lx\n", info.hi_flags); - - if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) { - fprintf(stderr, "hpet_poll: HPET_EPI failed\n"); - goto out; - } - - if (ioctl(fd, HPET_IE_ON, 0) < 0) { - fprintf(stderr, "hpet_poll, HPET_IE_ON failed\n"); - goto out; - } - - pfd.fd = fd; - pfd.events = POLLIN; - - for (i = 0; i < iterations; i++) { - pfd.revents = 0; - gettimeofday(&stv, &tz); - if (poll(&pfd, 1, -1) < 0) - fprintf(stderr, "hpet_poll: poll failed\n"); - else { - long data; - - gettimeofday(&etv, &tz); - usec = stv.tv_sec * 1000000 + stv.tv_usec; - usec = (etv.tv_sec * 1000000 + etv.tv_usec) - usec; - - fprintf(stderr, - "hpet_poll: expired time = 0x%lx\n", usec); - - fprintf(stderr, "hpet_poll: revents = 0x%x\n", - pfd.revents); - - if (read(fd, &data, sizeof(data)) != sizeof(data)) { - fprintf(stderr, "hpet_poll: read failed\n"); - } - else - fprintf(stderr, "hpet_poll: data 0x%lx\n", - data); - } - } - -out: - close(fd); - return; -} - -static int hpet_sigio_count; - -static void -hpet_sigio(int val) -{ - fprintf(stderr, "hpet_sigio: called\n"); - hpet_sigio_count++; -} - -void -hpet_fasync(int argc, const char **argv) -{ - unsigned long freq; - int iterations, i, fd, value; - sig_t oldsig; - struct hpet_info info; - - hpet_sigio_count = 0; - fd = -1; - - if ((oldsig = signal(SIGIO, hpet_sigio)) == SIG_ERR) { - fprintf(stderr, "hpet_fasync: failed to set signal handler\n"); - return; - } - - if (argc != 3) { - fprintf(stderr, "hpet_fasync: device-name freq iterations\n"); - goto out; - } - - fd = open(argv[0], O_RDONLY); - - if (fd < 0) { - fprintf(stderr, "hpet_fasync: failed to open %s\n", argv[0]); - return; - } - - - if ((fcntl(fd, F_SETOWN, getpid()) == 1) || - ((value = fcntl(fd, F_GETFL)) == 1) || - (fcntl(fd, F_SETFL, value | O_ASYNC) == 1)) { - fprintf(stderr, "hpet_fasync: fcntl failed\n"); - goto out; - } - - freq = atoi(argv[1]); - iterations = atoi(argv[2]); - - if (ioctl(fd, HPET_IRQFREQ, freq) < 0) { - fprintf(stderr, "hpet_fasync: HPET_IRQFREQ failed\n"); - goto out; - } - - if (ioctl(fd, HPET_INFO, &info) < 0) { - fprintf(stderr, "hpet_fasync: failed to get info\n"); - goto out; - } - - fprintf(stderr, "hpet_fasync: info.hi_flags 0x%lx\n", info.hi_flags); - - if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) { - fprintf(stderr, "hpet_fasync: HPET_EPI failed\n"); - goto out; - } - - if (ioctl(fd, HPET_IE_ON, 0) < 0) { - fprintf(stderr, "hpet_fasync, HPET_IE_ON failed\n"); - goto out; - } - - for (i = 0; i < iterations; i++) { - (void) pause(); - fprintf(stderr, "hpet_fasync: count = %d\n", hpet_sigio_count); - } - -out: - signal(SIGIO, oldsig); - - if (fd >= 0) - close(fd); - - return; -} - -The kernel API has three interfaces exported from the driver: - - hpet_register(struct hpet_task *tp, int periodic) - hpet_unregister(struct hpet_task *tp) - hpet_control(struct hpet_task *tp, unsigned int cmd, unsigned long arg) - -The kernel module using this interface fills in the ht_func and ht_data -members of the hpet_task structure before calling hpet_register. -hpet_control simply vectors to the hpet_ioctl routine and has the same -commands and respective arguments as the user API. hpet_unregister -is used to terminate usage of the HPET timer reserved by hpet_register. diff --git a/Documentation/timers/00-INDEX b/Documentation/timers/00-INDEX new file mode 100644 index 00000000000..397dc35e132 --- /dev/null +++ b/Documentation/timers/00-INDEX @@ -0,0 +1,10 @@ +00-INDEX + - this file +highres.txt + - High resolution timers and dynamic ticks design notes +hpet.txt + - High Precision Event Timer Driver for Linux +hrtimers.txt + - subsystem for high-resolution kernel timers +timer_stats.txt + - timer usage statistics diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt new file mode 100644 index 00000000000..6ad52d9dad6 --- /dev/null +++ b/Documentation/timers/hpet.txt @@ -0,0 +1,300 @@ + High Precision Event Timer Driver for Linux + +The High Precision Event Timer (HPET) hardware is the future replacement +for the 8254 and Real Time Clock (RTC) periodic timer functionality. +Each HPET can have up to 32 timers. It is possible to configure the +first two timers as legacy replacements for 8254 and RTC periodic timers. +A specification done by Intel and Microsoft can be found at +. + +The driver supports detection of HPET driver allocation and initialization +of the HPET before the driver module_init routine is called. This enables +platform code which uses timer 0 or 1 as the main timer to intercept HPET +initialization. An example of this initialization can be found in +arch/i386/kernel/time_hpet.c. + +The driver provides two APIs which are very similar to the API found in +the rtc.c driver. There is a user space API and a kernel space API. +An example user space program is provided below. + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +extern void hpet_open_close(int, const char **); +extern void hpet_info(int, const char **); +extern void hpet_poll(int, const char **); +extern void hpet_fasync(int, const char **); +extern void hpet_read(int, const char **); + +#include +#include +#include + +struct hpet_command { + char *command; + void (*func)(int argc, const char ** argv); +} hpet_command[] = { + { + "open-close", + hpet_open_close + }, + { + "info", + hpet_info + }, + { + "poll", + hpet_poll + }, + { + "fasync", + hpet_fasync + }, +}; + +int +main(int argc, const char ** argv) +{ + int i; + + argc--; + argv++; + + if (!argc) { + fprintf(stderr, "-hpet: requires command\n"); + return -1; + } + + + for (i = 0; i < (sizeof (hpet_command) / sizeof (hpet_command[0])); i++) + if (!strcmp(argv[0], hpet_command[i].command)) { + argc--; + argv++; + fprintf(stderr, "-hpet: executing %s\n", + hpet_command[i].command); + hpet_command[i].func(argc, argv); + return 0; + } + + fprintf(stderr, "do_hpet: command %s not implemented\n", argv[0]); + + return -1; +} + +void +hpet_open_close(int argc, const char **argv) +{ + int fd; + + if (argc != 1) { + fprintf(stderr, "hpet_open_close: device-name\n"); + return; + } + + fd = open(argv[0], O_RDONLY); + if (fd < 0) + fprintf(stderr, "hpet_open_close: open failed\n"); + else + close(fd); + + return; +} + +void +hpet_info(int argc, const char **argv) +{ +} + +void +hpet_poll(int argc, const char **argv) +{ + unsigned long freq; + int iterations, i, fd; + struct pollfd pfd; + struct hpet_info info; + struct timeval stv, etv; + struct timezone tz; + long usec; + + if (argc != 3) { + fprintf(stderr, "hpet_poll: device-name freq iterations\n"); + return; + } + + freq = atoi(argv[1]); + iterations = atoi(argv[2]); + + fd = open(argv[0], O_RDONLY); + + if (fd < 0) { + fprintf(stderr, "hpet_poll: open of %s failed\n", argv[0]); + return; + } + + if (ioctl(fd, HPET_IRQFREQ, freq) < 0) { + fprintf(stderr, "hpet_poll: HPET_IRQFREQ failed\n"); + goto out; + } + + if (ioctl(fd, HPET_INFO, &info) < 0) { + fprintf(stderr, "hpet_poll: failed to get info\n"); + goto out; + } + + fprintf(stderr, "hpet_poll: info.hi_flags 0x%lx\n", info.hi_flags); + + if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) { + fprintf(stderr, "hpet_poll: HPET_EPI failed\n"); + goto out; + } + + if (ioctl(fd, HPET_IE_ON, 0) < 0) { + fprintf(stderr, "hpet_poll, HPET_IE_ON failed\n"); + goto out; + } + + pfd.fd = fd; + pfd.events = POLLIN; + + for (i = 0; i < iterations; i++) { + pfd.revents = 0; + gettimeofday(&stv, &tz); + if (poll(&pfd, 1, -1) < 0) + fprintf(stderr, "hpet_poll: poll failed\n"); + else { + long data; + + gettimeofday(&etv, &tz); + usec = stv.tv_sec * 1000000 + stv.tv_usec; + usec = (etv.tv_sec * 1000000 + etv.tv_usec) - usec; + + fprintf(stderr, + "hpet_poll: expired time = 0x%lx\n", usec); + + fprintf(stderr, "hpet_poll: revents = 0x%x\n", + pfd.revents); + + if (read(fd, &data, sizeof(data)) != sizeof(data)) { + fprintf(stderr, "hpet_poll: read failed\n"); + } + else + fprintf(stderr, "hpet_poll: data 0x%lx\n", + data); + } + } + +out: + close(fd); + return; +} + +static int hpet_sigio_count; + +static void +hpet_sigio(int val) +{ + fprintf(stderr, "hpet_sigio: called\n"); + hpet_sigio_count++; +} + +void +hpet_fasync(int argc, const char **argv) +{ + unsigned long freq; + int iterations, i, fd, value; + sig_t oldsig; + struct hpet_info info; + + hpet_sigio_count = 0; + fd = -1; + + if ((oldsig = signal(SIGIO, hpet_sigio)) == SIG_ERR) { + fprintf(stderr, "hpet_fasync: failed to set signal handler\n"); + return; + } + + if (argc != 3) { + fprintf(stderr, "hpet_fasync: device-name freq iterations\n"); + goto out; + } + + fd = open(argv[0], O_RDONLY); + + if (fd < 0) { + fprintf(stderr, "hpet_fasync: failed to open %s\n", argv[0]); + return; + } + + + if ((fcntl(fd, F_SETOWN, getpid()) == 1) || + ((value = fcntl(fd, F_GETFL)) == 1) || + (fcntl(fd, F_SETFL, value | O_ASYNC) == 1)) { + fprintf(stderr, "hpet_fasync: fcntl failed\n"); + goto out; + } + + freq = atoi(argv[1]); + iterations = atoi(argv[2]); + + if (ioctl(fd, HPET_IRQFREQ, freq) < 0) { + fprintf(stderr, "hpet_fasync: HPET_IRQFREQ failed\n"); + goto out; + } + + if (ioctl(fd, HPET_INFO, &info) < 0) { + fprintf(stderr, "hpet_fasync: failed to get info\n"); + goto out; + } + + fprintf(stderr, "hpet_fasync: info.hi_flags 0x%lx\n", info.hi_flags); + + if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) { + fprintf(stderr, "hpet_fasync: HPET_EPI failed\n"); + goto out; + } + + if (ioctl(fd, HPET_IE_ON, 0) < 0) { + fprintf(stderr, "hpet_fasync, HPET_IE_ON failed\n"); + goto out; + } + + for (i = 0; i < iterations; i++) { + (void) pause(); + fprintf(stderr, "hpet_fasync: count = %d\n", hpet_sigio_count); + } + +out: + signal(SIGIO, oldsig); + + if (fd >= 0) + close(fd); + + return; +} + +The kernel API has three interfaces exported from the driver: + + hpet_register(struct hpet_task *tp, int periodic) + hpet_unregister(struct hpet_task *tp) + hpet_control(struct hpet_task *tp, unsigned int cmd, unsigned long arg) + +The kernel module using this interface fills in the ht_func and ht_data +members of the hpet_task structure before calling hpet_register. +hpet_control simply vectors to the hpet_ioctl routine and has the same +commands and respective arguments as the user API. hpet_unregister +is used to terminate usage of the HPET timer reserved by hpet_register. -- cgit v1.2.3-70-g09d2 From 5c05917e7fe313a187ad6ebb94c1c6cf42862a0b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 24 Jul 2008 17:29:40 -0700 Subject: x86: usb debug port early console, v4 based on work from Eric, and add some timeout so don't dead loop when debug device is not installed v2: fix checkpatch warning v3: move ehci struct def to linux/usrb/ehci_def.h from host/ehci.h also add CONFIG_EARLY_PRINTK_DBGP to disable it by default v4: address comments from Ingo, seperate ehci reg def moving to another patch also add auto detect port that connect to debug device for Nvidia southbridge Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Andi Kleen Cc: "Arjan van de Ven" Cc: "Eric W. Biederman" Cc: "Greg KH" Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 3 +- arch/x86/Kconfig.debug | 13 + arch/x86/kernel/early_printk.c | 762 +++++++++++++++++++++++++++++++++++- 3 files changed, 774 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e7bea3e8530..92ddd4afe17 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -657,11 +657,12 @@ and is between 256 and 4096 characters. It is defined in the file earlyprintk= [X86-32,X86-64,SH,BLACKFIN] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] + earlyprintk=dbgp Append ",keep" to not disable it when the real console takes over. - Only vga or serial at a time, not both. + Only vga or serial or usb debug port at a time. Currently only ttyS0 and ttyS1 are supported. diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 092f019e033..93422d2ecf6 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -43,6 +43,19 @@ config EARLY_PRINTK with klogd/syslogd or the X server. You should normally N here, unless you want to debug such a crash. +config EARLY_PRINTK_DBGP + bool "Early printk via EHCI debug port" + default n + depends on EARLY_PRINTK + help + Write kernel log output directly into the EHCI debug port. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation + it is not recommended because it looks ugly and doesn't cooperate + with klogd/syslogd or the X server. You should normally N here, + unless you want to debug such a crash. You need usb debug device. + config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index ff9e7350da5..28155acf706 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -3,11 +3,19 @@ #include #include #include +#include +#include +#include +#include #include #include #include #include #include +#include +#include +#include +#include /* Simple VGA output */ #define VGABASE (__ISA_IO_base + 0xb8000) @@ -78,6 +86,7 @@ static int early_serial_base = 0x3f8; /* ttyS0 */ static int early_serial_putc(unsigned char ch) { unsigned timeout = 0xffff; + while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout) cpu_relax(); outb(ch, early_serial_base + TXR); @@ -151,6 +160,721 @@ static struct console early_serial_console = { .index = -1, }; +#ifdef CONFIG_EARLY_PRINTK_DBGP + +static struct ehci_caps __iomem *ehci_caps; +static struct ehci_regs __iomem *ehci_regs; +static struct ehci_dbg_port __iomem *ehci_debug; +static unsigned int dbgp_endpoint_out; + +struct ehci_dev { + u32 bus; + u32 slot; + u32 func; +}; + +static struct ehci_dev ehci_dev; + +#define USB_DEBUG_DEVNUM 127 + +#define DBGP_DATA_TOGGLE 0x8800 + +static inline u32 dbgp_pid_update(u32 x, u32 tok) +{ + return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff); +} + +static inline u32 dbgp_len_update(u32 x, u32 len) +{ + return (x & ~0x0f) | (len & 0x0f); +} + +/* + * USB Packet IDs (PIDs) + */ + +/* token */ +#define USB_PID_OUT 0xe1 +#define USB_PID_IN 0x69 +#define USB_PID_SOF 0xa5 +#define USB_PID_SETUP 0x2d +/* handshake */ +#define USB_PID_ACK 0xd2 +#define USB_PID_NAK 0x5a +#define USB_PID_STALL 0x1e +#define USB_PID_NYET 0x96 +/* data */ +#define USB_PID_DATA0 0xc3 +#define USB_PID_DATA1 0x4b +#define USB_PID_DATA2 0x87 +#define USB_PID_MDATA 0x0f +/* Special */ +#define USB_PID_PREAMBLE 0x3c +#define USB_PID_ERR 0x3c +#define USB_PID_SPLIT 0x78 +#define USB_PID_PING 0xb4 +#define USB_PID_UNDEF_0 0xf0 + +#define USB_PID_DATA_TOGGLE 0x88 +#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE) + +#define PCI_CAP_ID_EHCI_DEBUG 0xa + +#define HUB_ROOT_RESET_TIME 50 /* times are in msec */ +#define HUB_SHORT_RESET_TIME 10 +#define HUB_LONG_RESET_TIME 200 +#define HUB_RESET_TIMEOUT 500 + +#define DBGP_MAX_PACKET 8 + +static int dbgp_wait_until_complete(void) +{ + u32 ctrl; + int loop = 0x100000; + + do { + ctrl = readl(&ehci_debug->control); + /* Stop when the transaction is finished */ + if (ctrl & DBGP_DONE) + break; + } while (--loop > 0); + + if (!loop) + return -1; + + /* + * Now that we have observed the completed transaction, + * clear the done bit. + */ + writel(ctrl | DBGP_DONE, &ehci_debug->control); + return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl); +} + +static void dbgp_mdelay(int ms) +{ + int i; + + while (ms--) { + for (i = 0; i < 1000; i++) + outb(0x1, 0x80); + } +} + +static void dbgp_breath(void) +{ + /* Sleep to give the debug port a chance to breathe */ +} + +static int dbgp_wait_until_done(unsigned ctrl) +{ + u32 pids, lpid; + int ret; + int loop = 3; + +retry: + writel(ctrl | DBGP_GO, &ehci_debug->control); + ret = dbgp_wait_until_complete(); + pids = readl(&ehci_debug->pids); + lpid = DBGP_PID_GET(pids); + + if (ret < 0) + return ret; + + /* + * If the port is getting full or it has dropped data + * start pacing ourselves, not necessary but it's friendly. + */ + if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET)) + dbgp_breath(); + + /* If I get a NACK reissue the transmission */ + if (lpid == USB_PID_NAK) { + if (--loop > 0) + goto retry; + } + + return ret; +} + +static void dbgp_set_data(const void *buf, int size) +{ + const unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = hi = 0; + for (i = 0; i < 4 && i < size; i++) + lo |= bytes[i] << (8*i); + for (; i < 8 && i < size; i++) + hi |= bytes[i] << (8*(i - 4)); + writel(lo, &ehci_debug->data03); + writel(hi, &ehci_debug->data47); +} + +static void dbgp_get_data(void *buf, int size) +{ + unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = readl(&ehci_debug->data03); + hi = readl(&ehci_debug->data47); + for (i = 0; i < 4 && i < size; i++) + bytes[i] = (lo >> (8*i)) & 0xff; + for (; i < 8 && i < size; i++) + bytes[i] = (hi >> (8*(i - 4))) & 0xff; +} + +static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, + const char *bytes, int size) +{ + u32 pids, addr, ctrl; + int ret; + + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_OUT); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + dbgp_set_data(bytes, size); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + return ret; +} + +static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, + int size) +{ + u32 pids, addr, ctrl; + int ret; + + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_IN); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl &= ~DBGP_OUT; + ctrl |= DBGP_GO; + + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + if (size > ret) + size = ret; + dbgp_get_data(data, size); + return ret; +} + +static int dbgp_control_msg(unsigned devnum, int requesttype, int request, + int value, int index, void *data, int size) +{ + u32 pids, addr, ctrl; + struct usb_ctrlrequest req; + int read; + int ret; + + read = (requesttype & USB_DIR_IN) != 0; + if (size > (read ? DBGP_MAX_PACKET:0)) + return -1; + + /* Compute the control message */ + req.bRequestType = requesttype; + req.bRequest = request; + req.wValue = value; + req.wIndex = index; + req.wLength = size; + + pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP); + addr = DBGP_EPADDR(devnum, 0); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, sizeof(req)); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + /* Send the setup message */ + dbgp_set_data(&req, sizeof(req)); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + /* Read the result */ + return dbgp_bulk_read(devnum, 0, data, size); +} + + +/* Find a PCI capability */ +static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap) +{ + u8 pos; + int bytes; + + if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + PCI_STATUS_CAP_LIST)) + return 0; + + pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { + u8 id; + + pos &= ~3; + id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + if (id == 0xff) + break; + if (id == cap) + return pos; + + pos = read_pci_config_byte(num, slot, func, + pos+PCI_CAP_LIST_NEXT); + } + return 0; +} + +static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func) +{ + u32 class; + + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); + if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI) + return 0; + + return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG); +} + +static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc) +{ + u32 bus, slot, func; + + for (bus = 0; bus < 256; bus++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + unsigned cap; + + cap = __find_dbgp(bus, slot, func); + + if (!cap) + continue; + if (ehci_num-- != 0) + continue; + *rbus = bus; + *rslot = slot; + *rfunc = func; + return cap; + } + } + } + return 0; +} + +static int ehci_reset_port(int port) +{ + u32 portsc; + u32 delay_time, delay; + int loop; + + /* Reset the usb debug port */ + portsc = readl(&ehci_regs->port_status[port - 1]); + portsc &= ~PORT_PE; + portsc |= PORT_RESET; + writel(portsc, &ehci_regs->port_status[port - 1]); + + delay = HUB_ROOT_RESET_TIME; + for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT; + delay_time += delay) { + dbgp_mdelay(delay); + + portsc = readl(&ehci_regs->port_status[port - 1]); + if (portsc & PORT_RESET) { + /* force reset to complete */ + loop = 2; + writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), + &ehci_regs->port_status[port - 1]); + do { + portsc = readl(&ehci_regs->port_status[port-1]); + } while ((portsc & PORT_RESET) && (--loop > 0)); + } + + /* Device went away? */ + if (!(portsc & PORT_CONNECT)) + return -ENOTCONN; + + /* bomb out completely if something weird happend */ + if ((portsc & PORT_CSC)) + return -EINVAL; + + /* If we've finished resetting, then break out of the loop */ + if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) + return 0; + } + return -EBUSY; +} + +static int ehci_wait_for_port(int port) +{ + u32 status; + int ret, reps; + + for (reps = 0; reps < 3; reps++) { + dbgp_mdelay(100); + status = readl(&ehci_regs->status); + if (status & STS_PCD) { + ret = ehci_reset_port(port); + if (ret == 0) + return 0; + } + } + return -ENOTCONN; +} + +#ifdef DBGP_DEBUG +# define dbgp_printk early_printk +#else +static inline void dbgp_printk(const char *fmt, ...) { } +#endif + +typedef void (*set_debug_port_t)(int port); + +static void default_set_debug_port(int port) +{ +} + +static set_debug_port_t set_debug_port = default_set_debug_port; + +static void nvidia_set_debug_port(int port) +{ + u32 dword; + dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x74); + dword &= ~(0x0f<<12); + dword |= ((port & 0x0f)<<12); + write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74, + dword); + dbgp_printk("set debug port to %d\n", port); +} + +static void __init detect_set_debug_port(void) +{ + u32 vendorid; + + vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x00); + + if ((vendorid & 0xffff) == 0x10de) { + dbgp_printk("using nvidia set_debug_port\n"); + set_debug_port = nvidia_set_debug_port; + } +} + +static int __init ehci_setup(void) +{ + struct usb_debug_descriptor dbgp_desc; + u32 cmd, ctrl, status, portsc, hcs_params; + u32 debug_port, new_debug_port = 0, n_ports; + u32 devnum; + int ret, i; + int loop; + int port_map_tried; + int playtimes = 3; + +try_next_time: + port_map_tried = 0; + +try_next_port: + + hcs_params = readl(&ehci_caps->hcs_params); + debug_port = HCS_DEBUG_PORT(hcs_params); + n_ports = HCS_N_PORTS(hcs_params); + + dbgp_printk("debug_port: %d\n", debug_port); + dbgp_printk("n_ports: %d\n", n_ports); + + for (i = 1; i <= n_ports; i++) { + portsc = readl(&ehci_regs->port_status[i-1]); + dbgp_printk("portstatus%d: %08x\n", i, portsc); + } + + if (port_map_tried && (new_debug_port != debug_port)) { + if (--playtimes) { + set_debug_port(new_debug_port); + goto try_next_time; + } + return -1; + } + + loop = 10; + /* Reset the EHCI controller */ + cmd = readl(&ehci_regs->command); + cmd |= CMD_RESET; + writel(cmd, &ehci_regs->command); + do { + cmd = readl(&ehci_regs->command); + } while ((cmd & CMD_RESET) && (--loop > 0)); + + if (!loop) { + dbgp_printk("can not reset ehci\n"); + return -1; + } + dbgp_printk("ehci reset done\n"); + + /* Claim ownership, but do not enable yet */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_OWNER; + ctrl &= ~(DBGP_ENABLED | DBGP_INUSE); + writel(ctrl, &ehci_debug->control); + + /* Start the ehci running */ + cmd = readl(&ehci_regs->command); + cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET); + cmd |= CMD_RUN; + writel(cmd, &ehci_regs->command); + + /* Ensure everything is routed to the EHCI */ + writel(FLAG_CF, &ehci_regs->configured_flag); + + /* Wait until the controller is no longer halted */ + loop = 10; + do { + status = readl(&ehci_regs->status); + } while ((status & STS_HALT) && (--loop > 0)); + + if (!loop) { + dbgp_printk("ehci can be started\n"); + return -1; + } + dbgp_printk("ehci started\n"); + + /* Wait for a device to show up in the debug port */ + ret = ehci_wait_for_port(debug_port); + if (ret < 0) { + dbgp_printk("No device found in debug port\n"); + goto next_debug_port; + } + dbgp_printk("ehci wait for port done\n"); + + /* Enable the debug port */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_CLAIM; + writel(ctrl, &ehci_debug->control); + ctrl = readl(&ehci_debug->control); + if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) { + dbgp_printk("No device in debug port\n"); + writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control); + goto err; + } + dbgp_printk("debug ported enabled\n"); + + /* Completely transfer the debug device to the debug controller */ + portsc = readl(&ehci_regs->port_status[debug_port - 1]); + portsc &= ~PORT_PE; + writel(portsc, &ehci_regs->port_status[debug_port - 1]); + + dbgp_mdelay(100); + + /* Find the debug device and make it device number 127 */ + for (devnum = 0; devnum <= 127; devnum++) { + ret = dbgp_control_msg(devnum, + USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0, + &dbgp_desc, sizeof(dbgp_desc)); + if (ret > 0) + break; + } + if (devnum > 127) { + dbgp_printk("Could not find attached debug device\n"); + goto err; + } + if (ret < 0) { + dbgp_printk("Attached device is not a debug device\n"); + goto err; + } + dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint; + + /* Move the device to 127 if it isn't already there */ + if (devnum != USB_DEBUG_DEVNUM) { + ret = dbgp_control_msg(devnum, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0); + if (ret < 0) { + dbgp_printk("Could not move attached device to %d\n", + USB_DEBUG_DEVNUM); + goto err; + } + devnum = USB_DEBUG_DEVNUM; + dbgp_printk("debug device renamed to 127\n"); + } + + /* Enable the debug interface */ + ret = dbgp_control_msg(USB_DEBUG_DEVNUM, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0); + if (ret < 0) { + dbgp_printk(" Could not enable the debug device\n"); + goto err; + } + dbgp_printk("debug interface enabled\n"); + + /* Perform a small write to get the even/odd data state in sync + */ + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1); + if (ret < 0) { + dbgp_printk("dbgp_bulk_write failed: %d\n", ret); + goto err; + } + dbgp_printk("small write doned\n"); + + return 0; +err: + /* Things didn't work so remove my claim */ + ctrl = readl(&ehci_debug->control); + ctrl &= ~(DBGP_CLAIM | DBGP_OUT); + writel(ctrl, &ehci_debug->control); + return -1; + +next_debug_port: + port_map_tried |= (1<<(debug_port - 1)); + new_debug_port = ((debug_port-1+1)%n_ports) + 1; + if (port_map_tried != ((1<> 29) & 0x7; + bar = (bar * 4) + 0xc; + offset = (debug_port >> 16) & 0xfff; + dbgp_printk("bar: %02x offset: %03x\n", bar, offset); + if (bar != PCI_BASE_ADDRESS_0) { + dbgp_printk("only debug ports on bar 1 handled.\n"); + + return -1; + } + + bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); + dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset); + if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) { + dbgp_printk("only simple 32bit mmio bars supported\n"); + + return -1; + } + + /* double check if the mem space is enabled */ + byte = read_pci_config_byte(bus, slot, func, 0x04); + if (!(byte & 0x2)) { + byte |= 0x02; + write_pci_config_byte(bus, slot, func, 0x04, byte); + dbgp_printk("mmio for ehci enabled\n"); + } + + /* + * FIXME I don't have the bar size so just guess PAGE_SIZE is more + * than enough. 1K is the biggest I have seen. + */ + set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK); + ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE); + ehci_bar += bar_val & ~PAGE_MASK; + dbgp_printk("ehci_bar: %p\n", ehci_bar); + + ehci_caps = ehci_bar; + ehci_regs = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase)); + ehci_debug = ehci_bar + offset; + ehci_dev.bus = bus; + ehci_dev.slot = slot; + ehci_dev.func = func; + + detect_set_debug_port(); + + ret = ehci_setup(); + if (ret < 0) { + dbgp_printk("ehci_setup failed\n"); + ehci_debug = 0; + + return -1; + } + + return 0; +} + +static void early_dbgp_write(struct console *con, const char *str, u32 n) +{ + int chunk, ret; + + if (!ehci_debug) + return; + while (n > 0) { + chunk = n; + if (chunk > DBGP_MAX_PACKET) + chunk = DBGP_MAX_PACKET; + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, + dbgp_endpoint_out, str, chunk); + str += chunk; + n -= chunk; + } +} + +static struct console early_dbgp_console = { + .name = "earlydbg", + .write = early_dbgp_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; +#endif + /* Console interface to a host file on AMD's SimNow! */ static int simnow_fd; @@ -165,6 +889,7 @@ enum { static noinline long simnow(long cmd, long a, long b, long c) { long ret; + asm volatile("cpuid" : "=a" (ret) : "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2)); @@ -174,6 +899,7 @@ static noinline long simnow(long cmd, long a, long b, long c) static void __init simnow_init(char *str) { char *fn = "klog"; + if (*str == '=') fn = ++str; /* error ignored */ @@ -208,10 +934,11 @@ asmlinkage void early_printk(const char *fmt, ...) va_end(ap); } -static int __initdata keep_early; static int __init setup_early_printk(char *buf) { + int keep_early; + if (!buf) return 0; @@ -219,8 +946,7 @@ static int __init setup_early_printk(char *buf) return 0; early_console_initialized = 1; - if (strstr(buf, "keep")) - keep_early = 1; + keep_early = (strstr(buf, "keep") != NULL); if (!strncmp(buf, "serial", 6)) { early_serial_init(buf + 6); @@ -238,6 +964,17 @@ static int __init setup_early_printk(char *buf) simnow_init(buf + 6); early_console = &simnow_console; keep_early = 1; +#ifdef CONFIG_EARLY_PRINTK_DBGP + } else if (!strncmp(buf, "dbgp", 4)) { + if (early_dbgp_init(buf+4) < 0) + return 0; + early_console = &early_dbgp_console; + /* + * usb subsys will reset ehci controller, so don't keep + * that early console + */ + keep_early = 0; +#endif #ifdef CONFIG_HVC_XEN } else if (!strncmp(buf, "xen", 3)) { early_console = &xenboot_console; @@ -251,4 +988,23 @@ static int __init setup_early_printk(char *buf) register_console(early_console); return 0; } + +void __init enable_debug_console(char *buf) +{ +#ifdef DBGP_DEBUG + struct console *old_early_console = NULL; + + if (early_console_initialized && early_console) { + old_early_console = early_console; + unregister_console(early_console); + early_console_initialized = 0; + } + + setup_early_printk(buf); + + if (early_console == old_early_console && old_early_console) + register_console(old_early_console); +#endif +} + early_param("earlyprintk", setup_early_printk); -- cgit v1.2.3-70-g09d2 From 7225e75144b9718cbbe1820d9c011c809d5773fd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 26 Jul 2008 17:54:22 -0700 Subject: documentation: move mtrr.txt to Doc/x86/ subdir Move mtrr.txt to the Documentation/x86/ subdirectory. Add 00-INDEX to the Documentation/x86/ subdirectory. Signed-off-by: Randy Dunlap Cc: Adrian Bunk Signed-off-by: Ingo Molnar --- Documentation/00-INDEX | 2 - Documentation/mtrr.txt | 305 --------------------------------------------- Documentation/x86/00-INDEX | 4 + Documentation/x86/mtrr.txt | 305 +++++++++++++++++++++++++++++++++++++++++++++ arch/x86/Kconfig | 2 +- 5 files changed, 310 insertions(+), 308 deletions(-) delete mode 100644 Documentation/mtrr.txt create mode 100644 Documentation/x86/00-INDEX create mode 100644 Documentation/x86/mtrr.txt (limited to 'Documentation') diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 1977fab3865..661b6ccfe18 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -253,8 +253,6 @@ mono.txt - how to execute Mono-based .NET binaries with the help of BINFMT_MISC. moxa-smartio - file with info on installing/using Moxa multiport serial driver. -mtrr.txt - - how to use PPro Memory Type Range Registers to increase performance. mutex-design.txt - info on the generic mutex subsystem. namespaces/ diff --git a/Documentation/mtrr.txt b/Documentation/mtrr.txt deleted file mode 100644 index c39ac395970..00000000000 --- a/Documentation/mtrr.txt +++ /dev/null @@ -1,305 +0,0 @@ -MTRR (Memory Type Range Register) control -3 Jun 1999 -Richard Gooch - - - On Intel P6 family processors (Pentium Pro, Pentium II and later) - the Memory Type Range Registers (MTRRs) may be used to control - processor access to memory ranges. This is most useful when you have - a video (VGA) card on a PCI or AGP bus. Enabling write-combining - allows bus write transfers to be combined into a larger transfer - before bursting over the PCI/AGP bus. This can increase performance - of image write operations 2.5 times or more. - - The Cyrix 6x86, 6x86MX and M II processors have Address Range - Registers (ARRs) which provide a similar functionality to MTRRs. For - these, the ARRs are used to emulate the MTRRs. - - The AMD K6-2 (stepping 8 and above) and K6-3 processors have two - MTRRs. These are supported. The AMD Athlon family provide 8 Intel - style MTRRs. - - The Centaur C6 (WinChip) has 8 MCRs, allowing write-combining. These - are supported. - - The VIA Cyrix III and VIA C3 CPUs offer 8 Intel style MTRRs. - - The CONFIG_MTRR option creates a /proc/mtrr file which may be used - to manipulate your MTRRs. Typically the X server should use - this. This should have a reasonably generic interface so that - similar control registers on other processors can be easily - supported. - - -There are two interfaces to /proc/mtrr: one is an ASCII interface -which allows you to read and write. The other is an ioctl() -interface. The ASCII interface is meant for administration. The -ioctl() interface is meant for C programs (i.e. the X server). The -interfaces are described below, with sample commands and C code. - -=============================================================================== -Reading MTRRs from the shell: - -% cat /proc/mtrr -reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1 -reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1 -=============================================================================== -Creating MTRRs from the C-shell: -# echo "base=0xf8000000 size=0x400000 type=write-combining" >! /proc/mtrr -or if you use bash: -# echo "base=0xf8000000 size=0x400000 type=write-combining" >| /proc/mtrr - -And the result thereof: -% cat /proc/mtrr -reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1 -reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1 -reg02: base=0xf8000000 (3968MB), size= 4MB: write-combining, count=1 - -This is for video RAM at base address 0xf8000000 and size 4 megabytes. To -find out your base address, you need to look at the output of your X -server, which tells you where the linear framebuffer address is. A -typical line that you may get is: - -(--) S3: PCI: 968 rev 0, Linear FB @ 0xf8000000 - -Note that you should only use the value from the X server, as it may -move the framebuffer base address, so the only value you can trust is -that reported by the X server. - -To find out the size of your framebuffer (what, you don't actually -know?), the following line will tell you: - -(--) S3: videoram: 4096k - -That's 4 megabytes, which is 0x400000 bytes (in hexadecimal). -A patch is being written for XFree86 which will make this automatic: -in other words the X server will manipulate /proc/mtrr using the -ioctl() interface, so users won't have to do anything. If you use a -commercial X server, lobby your vendor to add support for MTRRs. -=============================================================================== -Creating overlapping MTRRs: - -%echo "base=0xfb000000 size=0x1000000 type=write-combining" >/proc/mtrr -%echo "base=0xfb000000 size=0x1000 type=uncachable" >/proc/mtrr - -And the results: cat /proc/mtrr -reg00: base=0x00000000 ( 0MB), size= 64MB: write-back, count=1 -reg01: base=0xfb000000 (4016MB), size= 16MB: write-combining, count=1 -reg02: base=0xfb000000 (4016MB), size= 4kB: uncachable, count=1 - -Some cards (especially Voodoo Graphics boards) need this 4 kB area -excluded from the beginning of the region because it is used for -registers. - -NOTE: You can only create type=uncachable region, if the first -region that you created is type=write-combining. -=============================================================================== -Removing MTRRs from the C-shell: -% echo "disable=2" >! /proc/mtrr -or using bash: -% echo "disable=2" >| /proc/mtrr -=============================================================================== -Reading MTRRs from a C program using ioctl()'s: - -/* mtrr-show.c - - Source file for mtrr-show (example program to show MTRRs using ioctl()'s) - - Copyright (C) 1997-1998 Richard Gooch - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Richard Gooch may be reached by email at rgooch@atnf.csiro.au - The postal address is: - Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia. -*/ - -/* - This program will use an ioctl() on /proc/mtrr to show the current MTRR - settings. This is an alternative to reading /proc/mtrr. - - - Written by Richard Gooch 17-DEC-1997 - - Last updated by Richard Gooch 2-MAY-1998 - - -*/ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define TRUE 1 -#define FALSE 0 -#define ERRSTRING strerror (errno) - -static char *mtrr_strings[MTRR_NUM_TYPES] = -{ - "uncachable", /* 0 */ - "write-combining", /* 1 */ - "?", /* 2 */ - "?", /* 3 */ - "write-through", /* 4 */ - "write-protect", /* 5 */ - "write-back", /* 6 */ -}; - -int main () -{ - int fd; - struct mtrr_gentry gentry; - - if ( ( fd = open ("/proc/mtrr", O_RDONLY, 0) ) == -1 ) - { - if (errno == ENOENT) - { - fputs ("/proc/mtrr not found: not supported or you don't have a PPro?\n", - stderr); - exit (1); - } - fprintf (stderr, "Error opening /proc/mtrr\t%s\n", ERRSTRING); - exit (2); - } - for (gentry.regnum = 0; ioctl (fd, MTRRIOC_GET_ENTRY, &gentry) == 0; - ++gentry.regnum) - { - if (gentry.size < 1) - { - fprintf (stderr, "Register: %u disabled\n", gentry.regnum); - continue; - } - fprintf (stderr, "Register: %u base: 0x%lx size: 0x%lx type: %s\n", - gentry.regnum, gentry.base, gentry.size, - mtrr_strings[gentry.type]); - } - if (errno == EINVAL) exit (0); - fprintf (stderr, "Error doing ioctl(2) on /dev/mtrr\t%s\n", ERRSTRING); - exit (3); -} /* End Function main */ -=============================================================================== -Creating MTRRs from a C programme using ioctl()'s: - -/* mtrr-add.c - - Source file for mtrr-add (example programme to add an MTRRs using ioctl()) - - Copyright (C) 1997-1998 Richard Gooch - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Richard Gooch may be reached by email at rgooch@atnf.csiro.au - The postal address is: - Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia. -*/ - -/* - This programme will use an ioctl() on /proc/mtrr to add an entry. The first - available mtrr is used. This is an alternative to writing /proc/mtrr. - - - Written by Richard Gooch 17-DEC-1997 - - Last updated by Richard Gooch 2-MAY-1998 - - -*/ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define TRUE 1 -#define FALSE 0 -#define ERRSTRING strerror (errno) - -static char *mtrr_strings[MTRR_NUM_TYPES] = -{ - "uncachable", /* 0 */ - "write-combining", /* 1 */ - "?", /* 2 */ - "?", /* 3 */ - "write-through", /* 4 */ - "write-protect", /* 5 */ - "write-back", /* 6 */ -}; - -int main (int argc, char **argv) -{ - int fd; - struct mtrr_sentry sentry; - - if (argc != 4) - { - fprintf (stderr, "Usage:\tmtrr-add base size type\n"); - exit (1); - } - sentry.base = strtoul (argv[1], NULL, 0); - sentry.size = strtoul (argv[2], NULL, 0); - for (sentry.type = 0; sentry.type < MTRR_NUM_TYPES; ++sentry.type) - { - if (strcmp (argv[3], mtrr_strings[sentry.type]) == 0) break; - } - if (sentry.type >= MTRR_NUM_TYPES) - { - fprintf (stderr, "Illegal type: \"%s\"\n", argv[3]); - exit (2); - } - if ( ( fd = open ("/proc/mtrr", O_WRONLY, 0) ) == -1 ) - { - if (errno == ENOENT) - { - fputs ("/proc/mtrr not found: not supported or you don't have a PPro?\n", - stderr); - exit (3); - } - fprintf (stderr, "Error opening /proc/mtrr\t%s\n", ERRSTRING); - exit (4); - } - if (ioctl (fd, MTRRIOC_ADD_ENTRY, &sentry) == -1) - { - fprintf (stderr, "Error doing ioctl(2) on /dev/mtrr\t%s\n", ERRSTRING); - exit (5); - } - fprintf (stderr, "Sleeping for 5 seconds so you can see the new entry\n"); - sleep (5); - close (fd); - fputs ("I've just closed /proc/mtrr so now the new entry should be gone\n", - stderr); -} /* End Function main */ -=============================================================================== diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX new file mode 100644 index 00000000000..dbe3377754a --- /dev/null +++ b/Documentation/x86/00-INDEX @@ -0,0 +1,4 @@ +00-INDEX + - this file +mtrr.txt + - how to use x86 Memory Type Range Registers to increase performance diff --git a/Documentation/x86/mtrr.txt b/Documentation/x86/mtrr.txt new file mode 100644 index 00000000000..cc071dc333c --- /dev/null +++ b/Documentation/x86/mtrr.txt @@ -0,0 +1,305 @@ +MTRR (Memory Type Range Register) control +3 Jun 1999 +Richard Gooch + + + On Intel P6 family processors (Pentium Pro, Pentium II and later) + the Memory Type Range Registers (MTRRs) may be used to control + processor access to memory ranges. This is most useful when you have + a video (VGA) card on a PCI or AGP bus. Enabling write-combining + allows bus write transfers to be combined into a larger transfer + before bursting over the PCI/AGP bus. This can increase performance + of image write operations 2.5 times or more. + + The Cyrix 6x86, 6x86MX and M II processors have Address Range + Registers (ARRs) which provide a similar functionality to MTRRs. For + these, the ARRs are used to emulate the MTRRs. + + The AMD K6-2 (stepping 8 and above) and K6-3 processors have two + MTRRs. These are supported. The AMD Athlon family provide 8 Intel + style MTRRs. + + The Centaur C6 (WinChip) has 8 MCRs, allowing write-combining. These + are supported. + + The VIA Cyrix III and VIA C3 CPUs offer 8 Intel style MTRRs. + + The CONFIG_MTRR option creates a /proc/mtrr file which may be used + to manipulate your MTRRs. Typically the X server should use + this. This should have a reasonably generic interface so that + similar control registers on other processors can be easily + supported. + + +There are two interfaces to /proc/mtrr: one is an ASCII interface +which allows you to read and write. The other is an ioctl() +interface. The ASCII interface is meant for administration. The +ioctl() interface is meant for C programs (i.e. the X server). The +interfaces are described below, with sample commands and C code. + +=============================================================================== +Reading MTRRs from the shell: + +% cat /proc/mtrr +reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1 +reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1 +=============================================================================== +Creating MTRRs from the C-shell: +# echo "base=0xf8000000 size=0x400000 type=write-combining" >! /proc/mtrr +or if you use bash: +# echo "base=0xf8000000 size=0x400000 type=write-combining" >| /proc/mtrr + +And the result thereof: +% cat /proc/mtrr +reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1 +reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1 +reg02: base=0xf8000000 (3968MB), size= 4MB: write-combining, count=1 + +This is for video RAM at base address 0xf8000000 and size 4 megabytes. To +find out your base address, you need to look at the output of your X +server, which tells you where the linear framebuffer address is. A +typical line that you may get is: + +(--) S3: PCI: 968 rev 0, Linear FB @ 0xf8000000 + +Note that you should only use the value from the X server, as it may +move the framebuffer base address, so the only value you can trust is +that reported by the X server. + +To find out the size of your framebuffer (what, you don't actually +know?), the following line will tell you: + +(--) S3: videoram: 4096k + +That's 4 megabytes, which is 0x400000 bytes (in hexadecimal). +A patch is being written for XFree86 which will make this automatic: +in other words the X server will manipulate /proc/mtrr using the +ioctl() interface, so users won't have to do anything. If you use a +commercial X server, lobby your vendor to add support for MTRRs. +=============================================================================== +Creating overlapping MTRRs: + +%echo "base=0xfb000000 size=0x1000000 type=write-combining" >/proc/mtrr +%echo "base=0xfb000000 size=0x1000 type=uncachable" >/proc/mtrr + +And the results: cat /proc/mtrr +reg00: base=0x00000000 ( 0MB), size= 64MB: write-back, count=1 +reg01: base=0xfb000000 (4016MB), size= 16MB: write-combining, count=1 +reg02: base=0xfb000000 (4016MB), size= 4kB: uncachable, count=1 + +Some cards (especially Voodoo Graphics boards) need this 4 kB area +excluded from the beginning of the region because it is used for +registers. + +NOTE: You can only create type=uncachable region, if the first +region that you created is type=write-combining. +=============================================================================== +Removing MTRRs from the C-shell: +% echo "disable=2" >! /proc/mtrr +or using bash: +% echo "disable=2" >| /proc/mtrr +=============================================================================== +Reading MTRRs from a C program using ioctl()'s: + +/* mtrr-show.c + + Source file for mtrr-show (example program to show MTRRs using ioctl()'s) + + Copyright (C) 1997-1998 Richard Gooch + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Richard Gooch may be reached by email at rgooch@atnf.csiro.au + The postal address is: + Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia. +*/ + +/* + This program will use an ioctl() on /proc/mtrr to show the current MTRR + settings. This is an alternative to reading /proc/mtrr. + + + Written by Richard Gooch 17-DEC-1997 + + Last updated by Richard Gooch 2-MAY-1998 + + +*/ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TRUE 1 +#define FALSE 0 +#define ERRSTRING strerror (errno) + +static char *mtrr_strings[MTRR_NUM_TYPES] = +{ + "uncachable", /* 0 */ + "write-combining", /* 1 */ + "?", /* 2 */ + "?", /* 3 */ + "write-through", /* 4 */ + "write-protect", /* 5 */ + "write-back", /* 6 */ +}; + +int main () +{ + int fd; + struct mtrr_gentry gentry; + + if ( ( fd = open ("/proc/mtrr", O_RDONLY, 0) ) == -1 ) + { + if (errno == ENOENT) + { + fputs ("/proc/mtrr not found: not supported or you don't have a PPro?\n", + stderr); + exit (1); + } + fprintf (stderr, "Error opening /proc/mtrr\t%s\n", ERRSTRING); + exit (2); + } + for (gentry.regnum = 0; ioctl (fd, MTRRIOC_GET_ENTRY, &gentry) == 0; + ++gentry.regnum) + { + if (gentry.size < 1) + { + fprintf (stderr, "Register: %u disabled\n", gentry.regnum); + continue; + } + fprintf (stderr, "Register: %u base: 0x%lx size: 0x%lx type: %s\n", + gentry.regnum, gentry.base, gentry.size, + mtrr_strings[gentry.type]); + } + if (errno == EINVAL) exit (0); + fprintf (stderr, "Error doing ioctl(2) on /dev/mtrr\t%s\n", ERRSTRING); + exit (3); +} /* End Function main */ +=============================================================================== +Creating MTRRs from a C programme using ioctl()'s: + +/* mtrr-add.c + + Source file for mtrr-add (example programme to add an MTRRs using ioctl()) + + Copyright (C) 1997-1998 Richard Gooch + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Richard Gooch may be reached by email at rgooch@atnf.csiro.au + The postal address is: + Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia. +*/ + +/* + This programme will use an ioctl() on /proc/mtrr to add an entry. The first + available mtrr is used. This is an alternative to writing /proc/mtrr. + + + Written by Richard Gooch 17-DEC-1997 + + Last updated by Richard Gooch 2-MAY-1998 + + +*/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TRUE 1 +#define FALSE 0 +#define ERRSTRING strerror (errno) + +static char *mtrr_strings[MTRR_NUM_TYPES] = +{ + "uncachable", /* 0 */ + "write-combining", /* 1 */ + "?", /* 2 */ + "?", /* 3 */ + "write-through", /* 4 */ + "write-protect", /* 5 */ + "write-back", /* 6 */ +}; + +int main (int argc, char **argv) +{ + int fd; + struct mtrr_sentry sentry; + + if (argc != 4) + { + fprintf (stderr, "Usage:\tmtrr-add base size type\n"); + exit (1); + } + sentry.base = strtoul (argv[1], NULL, 0); + sentry.size = strtoul (argv[2], NULL, 0); + for (sentry.type = 0; sentry.type < MTRR_NUM_TYPES; ++sentry.type) + { + if (strcmp (argv[3], mtrr_strings[sentry.type]) == 0) break; + } + if (sentry.type >= MTRR_NUM_TYPES) + { + fprintf (stderr, "Illegal type: \"%s\"\n", argv[3]); + exit (2); + } + if ( ( fd = open ("/proc/mtrr", O_WRONLY, 0) ) == -1 ) + { + if (errno == ENOENT) + { + fputs ("/proc/mtrr not found: not supported or you don't have a PPro?\n", + stderr); + exit (3); + } + fprintf (stderr, "Error opening /proc/mtrr\t%s\n", ERRSTRING); + exit (4); + } + if (ioctl (fd, MTRRIOC_ADD_ENTRY, &sentry) == -1) + { + fprintf (stderr, "Error doing ioctl(2) on /dev/mtrr\t%s\n", ERRSTRING); + exit (5); + } + fprintf (stderr, "Sleeping for 5 seconds so you can see the new entry\n"); + sleep (5); + close (fd); + fputs ("I've just closed /proc/mtrr so now the new entry should be gone\n", + stderr); +} /* End Function main */ +=============================================================================== diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 03980cb0429..06f935469d0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1131,7 +1131,7 @@ config MTRR You can safely say Y even if your machine doesn't have MTRRs, you'll just add about 9 KB to your kernel. - See for more information. + See for more information. config MTRR_SANITIZER bool -- cgit v1.2.3-70-g09d2 From 64a76f667d987a559ad0726b4692c987800b22bc Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 29 Jul 2008 12:47:38 -0700 Subject: hpet: /dev/hpet - fixes and cleanup Minor /dev/hpet updates and bugfixes: * Remove dead code, mostly remnants of an incomplete/unusable kernel interface ... noted when addressing "sparse" warnings: + hpet_unregister() and a routine it calls + hpet_task and all references, including hpet_task_lock + hpet_data.hd_flags (and HPET_DATA_PLATFORM) * Correct and improve boot message: + displays *counter* (shared between comparators) bit width, not *timer* bit widths (which are often mixed) + relabel "timers" as "comparators"; this is less confusing, they are not independent like normal timers are (sigh) + display MHz not Hz; it's never less than 10 MHz. * Tighten and correct the userspace interface code + don't accidentally program comparators in 64-bit mode using 32-bit values ... always force comparators into 32-bit mode + provide the correct bit definition flagging comparators with periodic capability ... the ABI is unchanged * Update Documentation/hpet.txt + be more correct and current + expand description a bit + don't mention that now-gone kernel interface Plus, add a FIXME comment for something that could cause big trouble on systems with more capable HPETs than at least Intel seems to ship. It seems that few folk use this userspace interface; it's not very usable given the general lack of HPET IRQ routing. I'm told that the only real point of it any more is to mmap for fast timestamps; IMO that's handled better through the gettimeofday() vsyscall. Signed-off-by: David Brownell Acked-by: Clemens Ladisch Signed-off-by: Ingo Molnar --- Documentation/timers/hpet.txt | 43 ++++++++++----------- arch/x86/kernel/hpet.c | 6 ++- drivers/char/hpet.c | 90 ++++++++++++------------------------------- include/linux/hpet.h | 11 +----- 4 files changed, 51 insertions(+), 99 deletions(-) (limited to 'Documentation') diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt index 6ad52d9dad6..e7c09abcfab 100644 --- a/Documentation/timers/hpet.txt +++ b/Documentation/timers/hpet.txt @@ -1,21 +1,32 @@ High Precision Event Timer Driver for Linux -The High Precision Event Timer (HPET) hardware is the future replacement -for the 8254 and Real Time Clock (RTC) periodic timer functionality. -Each HPET can have up to 32 timers. It is possible to configure the -first two timers as legacy replacements for 8254 and RTC periodic timers. -A specification done by Intel and Microsoft can be found at -. +The High Precision Event Timer (HPET) hardware follows a specification +by Intel and Microsoft which can be found at + + http://www.intel.com/technology/architecture/hpetspec.htm + +Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision") +and up to 32 comparators. Normally three or more comparators are provided, +each of which can generate oneshot interupts and at least one of which has +additional hardware to support periodic interrupts. The comparators are +also called "timers", which can be misleading since usually timers are +independent of each other ... these share a counter, complicating resets. + +HPET devices can support two interrupt routing modes. In one mode, the +comparators are additional interrupt sources with no particular system +role. Many x86 BIOS writers don't route HPET interrupts at all, which +prevents use of that mode. They support the other "legacy replacement" +mode where the first two comparators block interrupts from 8254 timers +and from the RTC. The driver supports detection of HPET driver allocation and initialization of the HPET before the driver module_init routine is called. This enables platform code which uses timer 0 or 1 as the main timer to intercept HPET initialization. An example of this initialization can be found in -arch/i386/kernel/time_hpet.c. +arch/x86/kernel/hpet.c. -The driver provides two APIs which are very similar to the API found in -the rtc.c driver. There is a user space API and a kernel space API. -An example user space program is provided below. +The driver provides a userspace API which resembles the API found in the +RTC driver framework. An example user space program is provided below. #include #include @@ -286,15 +297,3 @@ out: return; } - -The kernel API has three interfaces exported from the driver: - - hpet_register(struct hpet_task *tp, int periodic) - hpet_unregister(struct hpet_task *tp) - hpet_control(struct hpet_task *tp, unsigned int cmd, unsigned long arg) - -The kernel module using this interface fills in the ht_func and ht_data -members of the hpet_task structure before calling hpet_register. -hpet_control simply vectors to the hpet_ioctl routine and has the same -commands and respective arguments as the user API. hpet_unregister -is used to terminate usage of the HPET timer reserved by hpet_register. diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index ad2b15a1334..82d459186fd 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -115,13 +115,17 @@ static void hpet_reserve_platform_timers(unsigned long id) hd.hd_phys_address = hpet_address; hd.hd_address = hpet; hd.hd_nirqs = nrtimers; - hd.hd_flags = HPET_DATA_PLATFORM; hpet_reserve_timer(&hd, 0); #ifdef CONFIG_HPET_EMULATE_RTC hpet_reserve_timer(&hd, 1); #endif + /* + * NOTE that hd_irq[] reflects IOAPIC input pins (LEGACY_8254 + * is wrong for i8259!) not the output IRQ. Many BIOS writers + * don't bother configuring *any* comparator interrupts. + */ hd.hd_irq[0] = HPET_LEGACY_8254; hd.hd_irq[1] = HPET_LEGACY_RTC; diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index f3981ffe20f..4bc1da4d4f8 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -53,6 +53,11 @@ #define HPET_RANGE_SIZE 1024 /* from HPET spec */ + +/* WARNING -- don't get confused. These macros are never used + * to write the (single) counter, and rarely to read it. + * They're badly named; to fix, someday. + */ #if BITS_PER_LONG == 64 #define write_counter(V, MC) writeq(V, MC) #define read_counter(MC) readq(MC) @@ -77,7 +82,7 @@ static struct clocksource clocksource_hpet = { .rating = 250, .read = read_hpet, .mask = CLOCKSOURCE_MASK(64), - .mult = 0, /*to be caluclated*/ + .mult = 0, /* to be calculated */ .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -86,8 +91,6 @@ static struct clocksource *hpet_clocksource; /* A lock for concurrent access by app and isr hpet activity. */ static DEFINE_SPINLOCK(hpet_lock); -/* A lock for concurrent intermodule access to hpet and isr hpet activity. */ -static DEFINE_SPINLOCK(hpet_task_lock); #define HPET_DEV_NAME (7) @@ -99,7 +102,6 @@ struct hpet_dev { unsigned long hd_irqdata; wait_queue_head_t hd_waitqueue; struct fasync_struct *hd_async_queue; - struct hpet_task *hd_task; unsigned int hd_flags; unsigned int hd_irq; unsigned int hd_hdwirq; @@ -173,11 +175,6 @@ static irqreturn_t hpet_interrupt(int irq, void *data) writel(isr, &devp->hd_hpet->hpet_isr); spin_unlock(&hpet_lock); - spin_lock(&hpet_task_lock); - if (devp->hd_task) - devp->hd_task->ht_func(devp->hd_task->ht_data); - spin_unlock(&hpet_task_lock); - wake_up_interruptible(&devp->hd_waitqueue); kill_fasync(&devp->hd_async_queue, SIGIO, POLL_IN); @@ -260,8 +257,7 @@ static int hpet_open(struct inode *inode, struct file *file) for (devp = NULL, hpetp = hpets; hpetp && !devp; hpetp = hpetp->hp_next) for (i = 0; i < hpetp->hp_ntimer; i++) - if (hpetp->hp_dev[i].hd_flags & HPET_OPEN - || hpetp->hp_dev[i].hd_task) + if (hpetp->hp_dev[i].hd_flags & HPET_OPEN) continue; else { devp = &hpetp->hp_dev[i]; @@ -504,7 +500,11 @@ static int hpet_ioctl_ieon(struct hpet_dev *devp) devp->hd_irq = irq; t = devp->hd_ireqfreq; v = readq(&timer->hpet_config); - g = v | Tn_INT_ENB_CNF_MASK; + + /* 64-bit comparators are not yet supported through the ioctls, + * so force this into 32-bit mode if it supports both modes + */ + g = v | Tn_32MODE_CNF_MASK | Tn_INT_ENB_CNF_MASK; if (devp->hd_flags & HPET_PERIODIC) { write_counter(t, &timer->hpet_compare); @@ -514,6 +514,12 @@ static int hpet_ioctl_ieon(struct hpet_dev *devp) v |= Tn_VAL_SET_CNF_MASK; writeq(v, &timer->hpet_config); local_irq_save(flags); + + /* NOTE: what we modify here is a hidden accumulator + * register supported by periodic-capable comparators. + * We never want to modify the (single) counter; that + * would affect all the comparators. + */ m = read_counter(&hpet->hpet_mc); write_counter(t + m + hpetp->hp_delta, &timer->hpet_compare); } else { @@ -667,57 +673,6 @@ static int hpet_is_known(struct hpet_data *hdp) return 0; } -static inline int hpet_tpcheck(struct hpet_task *tp) -{ - struct hpet_dev *devp; - struct hpets *hpetp; - - devp = tp->ht_opaque; - - if (!devp) - return -ENXIO; - - for (hpetp = hpets; hpetp; hpetp = hpetp->hp_next) - if (devp >= hpetp->hp_dev - && devp < (hpetp->hp_dev + hpetp->hp_ntimer) - && devp->hd_hpet == hpetp->hp_hpet) - return 0; - - return -ENXIO; -} - -#if 0 -int hpet_unregister(struct hpet_task *tp) -{ - struct hpet_dev *devp; - struct hpet_timer __iomem *timer; - int err; - - if ((err = hpet_tpcheck(tp))) - return err; - - spin_lock_irq(&hpet_task_lock); - spin_lock(&hpet_lock); - - devp = tp->ht_opaque; - if (devp->hd_task != tp) { - spin_unlock(&hpet_lock); - spin_unlock_irq(&hpet_task_lock); - return -ENXIO; - } - - timer = devp->hd_timer; - writeq((readq(&timer->hpet_config) & ~Tn_INT_ENB_CNF_MASK), - &timer->hpet_config); - devp->hd_flags &= ~(HPET_IE | HPET_PERIODIC); - devp->hd_task = NULL; - spin_unlock(&hpet_lock); - spin_unlock_irq(&hpet_task_lock); - - return 0; -} -#endif /* 0 */ - static ctl_table hpet_table[] = { { .ctl_name = CTL_UNNUMBERED, @@ -872,9 +827,12 @@ int hpet_alloc(struct hpet_data *hdp) printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]); printk("\n"); - printk(KERN_INFO "hpet%u: %u %d-bit timers, %Lu Hz\n", - hpetp->hp_which, hpetp->hp_ntimer, - cap & HPET_COUNTER_SIZE_MASK ? 64 : 32, hpetp->hp_tick_freq); + printk(KERN_INFO + "hpet%u: %u comparators, %d-bit %u.%06u MHz counter\n", + hpetp->hp_which, hpetp->hp_ntimer, + cap & HPET_COUNTER_SIZE_MASK ? 64 : 32, + (unsigned) (hpetp->hp_tick_freq / 1000000), + (unsigned) (hpetp->hp_tick_freq % 1000000)); mcfg = readq(&hpet->hpet_config); if ((mcfg & HPET_ENABLE_CNF_MASK) == 0) { diff --git a/include/linux/hpet.h b/include/linux/hpet.h index 6d2626b63a9..79f63a27bce 100644 --- a/include/linux/hpet.h +++ b/include/linux/hpet.h @@ -92,23 +92,14 @@ struct hpet { * exported interfaces */ -struct hpet_task { - void (*ht_func) (void *); - void *ht_data; - void *ht_opaque; -}; - struct hpet_data { unsigned long hd_phys_address; void __iomem *hd_address; unsigned short hd_nirqs; - unsigned short hd_flags; unsigned int hd_state; /* timer allocated */ unsigned int hd_irq[HPET_MAX_TIMERS]; }; -#define HPET_DATA_PLATFORM 0x0001 /* platform call to hpet_alloc */ - static inline void hpet_reserve_timer(struct hpet_data *hd, int timer) { hd->hd_state |= (1 << timer); @@ -126,7 +117,7 @@ struct hpet_info { unsigned short hi_timer; }; -#define HPET_INFO_PERIODIC 0x0001 /* timer is periodic */ +#define HPET_INFO_PERIODIC 0x0010 /* periodic-capable comparator */ #define HPET_IE_ON _IO('h', 0x01) /* interrupt on */ #define HPET_IE_OFF _IO('h', 0x02) /* interrupt off */ -- cgit v1.2.3-70-g09d2 From 5ef03460a6ffc1d3ee6b6f2abc6765d3e224cf89 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 8 Aug 2008 17:06:01 +0200 Subject: ALSA: Introduce snd_BUG_ON() macro Introduced snd_BUG_ON() macro as a replacement of snd_assert() macro. snd_assert() is pretty ugly as it has the control flow in its argument. OTOH, snd_BUG_ON() behaves like a normal conditional, thus it's much easier to read the flow. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- .../sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 41 ++++++++++++++++++++++ include/sound/core.h | 4 +++ 2 files changed, 45 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index e13c4e67029..df699e4323e 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -6173,6 +6173,47 @@ struct _snd_pcm_runtime { When no debug flag is set, this macro is ignored. + +
+ <function>snd_BUG_ON()</function> + + snd_BUG_ON() macro is similar with + WARN_ON() macro. For example, + + + + + + + + or it can be used as the condition, + + + + + + + + + + The macro takes an conditional expression to evaluate. + When CONFIG_SND_DEBUG, is set, the + expression is actually evaluated. If it's non-zero, it shows + the warning message such as + BUG? (xxx) + normally followed by stack trace. It returns the evaluated + value. + When no CONFIG_SND_DEBUG is set, this + macro always returns zero. + + +
+ diff --git a/include/sound/core.h b/include/sound/core.h index 1a4ff0bdcf6..938c36a0e87 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -28,6 +28,7 @@ #include /* struct rw_semaphore */ #include /* pm_message_t */ #include +#include /* number of supported soundcards */ #ifdef CONFIG_SND_DYNAMIC_MINORS @@ -405,11 +406,14 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) dump_stack(); \ } while (0) +#define snd_BUG_ON(cond) WARN((cond), "BUG? (%s)\n", __stringify(cond)) + #else /* !CONFIG_SND_DEBUG */ #define snd_printd(fmt, args...) /* nothing */ #define snd_assert(expr, args...) (void)(expr) #define snd_BUG() /* nothing */ +#define snd_BUG_ON(cond) ({/*(void)(cond);*/ 0;}) /* always false */ #endif /* CONFIG_SND_DEBUG */ -- cgit v1.2.3-70-g09d2 From 7cc6dffdae28058f5953fac5743b6abf705d4f05 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 8 Aug 2008 17:14:55 +0200 Subject: ALSA: Kill snd_assert() definition Remove snd_assert() completely now. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- .../sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 29 +--------------------- include/sound/core.h | 19 -------------- 2 files changed, 1 insertion(+), 47 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index df699e4323e..b54cb5048df 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -6135,38 +6135,11 @@ struct _snd_pcm_runtime { -
- <function>snd_assert()</function> - - snd_assert() macro is similar with the - normal assert() macro. For example, - - - - - - - - - - The first argument is the expression to evaluate, and the - second argument is the action if it fails. When - CONFIG_SND_DEBUG, is set, it will show an - error message such as BUG? (xxx) - together with stack trace. - - - When no debug flag is set, this macro is ignored. - -
-
<function>snd_BUG()</function> It shows the BUG? message and - stack trace as well as snd_assert at the point. + stack trace as well as snd_BUG_ON at the point. It's useful to show that a fatal error happens there. diff --git a/include/sound/core.h b/include/sound/core.h index 938c36a0e87..b3d8ac7c832 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -368,8 +368,6 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) #ifdef CONFIG_SND_DEBUG -#define __ASTRING__(x) #x - #ifdef CONFIG_SND_VERBOSE_PRINTK /** * snd_printd - debug printk @@ -384,22 +382,6 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) #define snd_printd(fmt, args...) \ printk(fmt ,##args) #endif -/** - * snd_assert - run-time assertion macro - * @expr: expression - * - * This macro checks the expression in run-time and invokes the commands - * given in the rest arguments if the assertion is failed. - * When CONFIG_SND_DEBUG is not set, the expression is executed but - * not checked. - */ -#define snd_assert(expr, args...) do { \ - if (unlikely(!(expr))) { \ - snd_printk(KERN_ERR "BUG? (%s)\n", __ASTRING__(expr)); \ - dump_stack(); \ - args; \ - } \ -} while (0) #define snd_BUG() do { \ snd_printk(KERN_ERR "BUG?\n"); \ @@ -411,7 +393,6 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) #else /* !CONFIG_SND_DEBUG */ #define snd_printd(fmt, args...) /* nothing */ -#define snd_assert(expr, args...) (void)(expr) #define snd_BUG() /* nothing */ #define snd_BUG_ON(cond) ({/*(void)(cond);*/ 0;}) /* always false */ -- cgit v1.2.3-70-g09d2 From 6ef109050da99952b59397840e9b50cd6611e92a Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 13 Aug 2008 00:10:55 +0400 Subject: ALSA: ALSA-Configuration.txt: supported cards update ALSA-Configuration.txt: supported cards update Signed-off-by: Alexander Beregalov Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- Documentation/sound/alsa/ALSA-Configuration.txt | 26 ++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index b117e42a616..dd083b2a5bd 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -746,8 +746,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module snd-hda-intel -------------------- - Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8), - ATI SB450, SB600, RS600, + Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10, + PCH, SCH), + ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620, + RV630, RV635, RV670, RV770, VIA VT8251/VT8237A, SIS966, ULI M5461 @@ -1166,6 +1168,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * Event Electronics, EZ8 * Digigram VX442 * Lionstracs, Mediastaton + * Terrasoniq TS 88 model - Use the given board model, one of the following: delta1010, dio2496, delta66, delta44, audiophile, delta410, @@ -1200,7 +1203,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * TerraTec Phase 22 * TerraTec Phase 28 * AudioTrak Prodigy 7.1 - * AudioTrak Prodigy 7.1LT + * AudioTrak Prodigy 7.1 LT + * AudioTrak Prodigy 7.1 XT + * AudioTrak Prodigy 7.1 HIFI + * AudioTrak Prodigy 7.1 HD2 * AudioTrak Prodigy 192 * Pontis MS300 * Albatron K8X800 Pro II @@ -1211,12 +1217,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * Shuttle SN25P * Onkyo SE-90PCI * Onkyo SE-200PCI + * ESI Juli@ + * Hercules Fortissimo IV + * EGO-SYS WaveTerminal 192M model - Use the given board model, one of the following: revo51, revo71, amp2000, prodigy71, prodigy71lt, - prodigy192, aureon51, aureon71, universe, ap192, - k8x800, phase22, phase28, ms300, av710, se200pci, - se90pci + prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192, + juli, aureon51, aureon71, universe, ap192, k8x800, + phase22, phase28, ms300, av710, se200pci, se90pci, + fortissimo4, sn25p, WT192M This module supports multiple cards and autoprobe. @@ -1255,7 +1265,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for AC'97 motherboards from Intel and compatibles. * Intel i810/810E, i815, i820, i830, i84x, MX440 - ICH5, ICH6, ICH7, ESB2 + ICH5, ICH6, ICH7, 6300ESB, ESB2 * SiS 7012 (SiS 735) * NVidia NForce, NForce2, NForce3, MCP04, CK804 CK8, CK8S, MCP501 @@ -1951,6 +1961,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * CHIC True Sound 4Dwave * Shark Predator4D-PCI * Jaton SonicWave 4D + * SiS SI7018 PCI Audio + * Hoontech SoundTrack Digital 4DWave NX pcm_channels - max channels (voices) reserved for PCM wavetable_size - max wavetable size in kB (4-?kb) -- cgit v1.2.3-70-g09d2 From 8a8f2662c535e1dedced896cc68cb8473fd98fa0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 13 Aug 2008 15:27:43 +0200 Subject: ALSA: Add missing description of usb-audio parameters Added the missing description of module parameters of usb-audio driver to ALSA-Configuration.txt. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- Documentation/sound/alsa/ALSA-Configuration.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index dd083b2a5bd..68bbc25ff39 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1978,12 +1978,20 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. vid - Vendor ID for the device (optional) pid - Product ID for the device (optional) + nrpacks - Max. number of packets per URB (default: 8) + async_unlink - Use async unlink mode (default: yes) device_setup - Device specific magic number (optional) - Influence depends on the device - Default: 0x0000 This module supports multiple devices, autoprobe and hotplugging. + NB: nrpacks parameter can be modified dynamically via sysfs. + Don't put the value over 20. Changing via sysfs has no sanity + check. + NB: async_unlink=0 would cause Oops. It remains just for + debugging purpose (if any). + Module snd-usb-caiaq -------------------- -- cgit v1.2.3-70-g09d2 From 7a9b8063cf7d78d7de4f2555357101087548c699 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 13 Aug 2008 15:40:53 +0200 Subject: ALSA: usb-audio - Add ignore_ctl_error parameter Added the ignore_ctl_error parameter to enable/disable the control-error handling for mixer interfaces. It was a hard-coded ifdef, and now you can change it more easily. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- Documentation/sound/alsa/ALSA-Configuration.txt | 5 +++++ sound/usb/usbaudio.c | 7 +++++-- sound/usb/usbaudio.h | 3 ++- sound/usb/usbmixer.c | 7 +++---- 4 files changed, 15 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 68bbc25ff39..b33e030509f 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1983,6 +1983,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. device_setup - Device specific magic number (optional) - Influence depends on the device - Default: 0x0000 + ignore_ctl_error - Ignore any USB-controller regarding mixer + interface (default: no) This module supports multiple devices, autoprobe and hotplugging. @@ -1991,6 +1993,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. check. NB: async_unlink=0 would cause Oops. It remains just for debugging purpose (if any). + NB: ignore_ctl_error=1 may help when you get an error at accessing + the mixer element such as URB error -22. This happens on some + buggy USB device or the controller. Module snd-usb-caiaq -------------------- diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index c91f18cdc8b..c5cf682c352 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -71,6 +71,7 @@ static int pid[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = -1 }; static int nrpacks = 8; /* max. number of packets per urb */ static int async_unlink = 1; static int device_setup[SNDRV_CARDS]; /* device parameter for this card*/ +static int ignore_ctl_error; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for the USB audio adapter."); @@ -88,7 +89,9 @@ module_param(async_unlink, bool, 0444); MODULE_PARM_DESC(async_unlink, "Use async unlink mode."); module_param_array(device_setup, int, NULL, 0444); MODULE_PARM_DESC(device_setup, "Specific device setup (if needed)."); - +module_param(ignore_ctl_error, bool, 0444); +MODULE_PARM_DESC(ignore_ctl_error, + "Ignore errors from USB controller for mixer interfaces."); /* * debug the h/w constraints @@ -3633,7 +3636,7 @@ static void *snd_usb_audio_probe(struct usb_device *dev, if (err > 0) { /* create normal USB audio interfaces */ if (snd_usb_create_streams(chip, ifnum) < 0 || - snd_usb_create_mixer(chip, ifnum) < 0) { + snd_usb_create_mixer(chip, ifnum, ignore_ctl_error) < 0) { goto __error; } } diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 140ba363414..f3ca77f08ea 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -223,7 +223,8 @@ int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype, __u16 value, __u16 index, void *data, __u16 size, int timeout); -int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif); +int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif, + int ignore_error); void snd_usb_mixer_disconnect(struct list_head *p); int snd_usb_create_midi_interface(struct snd_usb_audio *chip, struct usb_interface *iface, diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c index 6621fad8c5f..a49246113e7 100644 --- a/sound/usb/usbmixer.c +++ b/sound/usb/usbmixer.c @@ -2014,7 +2014,8 @@ static void snd_audigy2nx_proc_read(struct snd_info_entry *entry, } } -int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif) +int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif, + int ignore_error) { static struct snd_device_ops dev_ops = { .dev_free = snd_usb_mixer_dev_free @@ -2029,9 +2030,7 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif) return -ENOMEM; mixer->chip = chip; mixer->ctrlif = ctrlif; -#ifdef IGNORE_CTL_ERROR - mixer->ignore_ctl_error = 1; -#endif + mixer->ignore_ctl_error = ignore_error; mixer->id_elems = kcalloc(256, sizeof(*mixer->id_elems), GFP_KERNEL); if (!mixer->id_elems) { kfree(mixer); -- cgit v1.2.3-70-g09d2 From 34d7c2b38d124219b7034356716e3455c439acd3 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Fri, 1 Aug 2008 14:11:05 -0700 Subject: rcu: remove list_for_each_rcu() All of the in-tree uses of list_for_each_rcu() have been converted to list_for_each_entry_rcu(), so list_for_each_rcu() can now be removed. Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- Documentation/RCU/checklist.txt | 2 +- Documentation/RCU/whatisRCU.txt | 2 -- include/linux/rculist.h | 14 -------------- 3 files changed, 1 insertion(+), 17 deletions(-) (limited to 'Documentation') diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index cf5562cbe35..6e253407b3d 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -210,7 +210,7 @@ over a rather long period of time, but improvements are always welcome! number of updates per grace period. 9. All RCU list-traversal primitives, which include - rcu_dereference(), list_for_each_rcu(), list_for_each_entry_rcu(), + rcu_dereference(), list_for_each_entry_rcu(), list_for_each_continue_rcu(), and list_for_each_safe_rcu(), must be either within an RCU read-side critical section or must be protected by appropriate update-side locks. RCU diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index e04d643a9f5..96170824a71 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -786,8 +786,6 @@ RCU pointer/list traversal: list_for_each_entry_rcu hlist_for_each_entry_rcu - list_for_each_rcu (to be deprecated in favor of - list_for_each_entry_rcu) list_for_each_continue_rcu (to be deprecated in favor of new list_for_each_entry_continue_rcu) diff --git a/include/linux/rculist.h b/include/linux/rculist.h index eb4443c7e05..e649bd3f2c9 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -198,20 +198,6 @@ static inline void list_splice_init_rcu(struct list_head *list, at->prev = last; } -/** - * list_for_each_rcu - iterate over an rcu-protected list - * @pos: the &struct list_head to use as a loop cursor. - * @head: the head for your list. - * - * This list-traversal primitive may safely run concurrently with - * the _rcu list-mutation primitives such as list_add_rcu() - * as long as the traversal is guarded by rcu_read_lock(). - */ -#define list_for_each_rcu(pos, head) \ - for (pos = rcu_dereference((head)->next); \ - prefetch(pos->next), pos != (head); \ - pos = rcu_dereference(pos->next)) - #define __list_for_each_rcu(pos, head) \ for (pos = rcu_dereference((head)->next); \ pos != (head); \ -- cgit v1.2.3-70-g09d2 From 3f23d815c5049c9d7022226cec2242e384dd0b43 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 17 Aug 2008 21:44:22 -0700 Subject: security: add/fix security kernel-doc Add security/inode.c functions to the kernel-api docbook. Use '%' on constants in kernel-doc notation. Fix several typos/spellos in security function descriptions. Signed-off-by: Randy Dunlap Signed-off-by: James Morris --- Documentation/DocBook/kernel-api.tmpl | 1 + security/inode.c | 33 ++++++++++++++++----------------- security/security.c | 8 ++++---- 3 files changed, 21 insertions(+), 21 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index b7b1482f6e0..cd0e6d5370d 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -283,6 +283,7 @@ X!Earch/x86/kernel/mca_32.c Security Framework !Isecurity/security.c +!Esecurity/inode.c diff --git a/security/inode.c b/security/inode.c index acc6cf0d790..ca4958ebad8 100644 --- a/security/inode.c +++ b/security/inode.c @@ -190,7 +190,7 @@ static int create_by_name(const char *name, mode_t mode, * @name: a pointer to a string containing the name of the file to create. * @mode: the permission that the file should have * @parent: a pointer to the parent dentry for this file. This should be a - * directory dentry if set. If this paramater is NULL, then the + * directory dentry if set. If this parameter is %NULL, then the * file will be created in the root of the securityfs filesystem. * @data: a pointer to something that the caller will want to get to later * on. The inode.i_private pointer will point to this value on @@ -199,18 +199,18 @@ static int create_by_name(const char *name, mode_t mode, * this file. * * This is the basic "create a file" function for securityfs. It allows for a - * wide range of flexibility in createing a file, or a directory (if you + * wide range of flexibility in creating a file, or a directory (if you * want to create a directory, the securityfs_create_dir() function is - * recommended to be used instead.) + * recommended to be used instead). * - * This function will return a pointer to a dentry if it succeeds. This + * This function returns a pointer to a dentry if it succeeds. This * pointer must be passed to the securityfs_remove() function when the file is * to be removed (no automatic cleanup happens if your module is unloaded, - * you are responsible here.) If an error occurs, NULL will be returned. + * you are responsible here). If an error occurs, %NULL is returned. * - * If securityfs is not enabled in the kernel, the value -ENODEV will be + * If securityfs is not enabled in the kernel, the value %-ENODEV is * returned. It is not wise to check for this value, but rather, check for - * NULL or !NULL instead as to eliminate the need for #ifdef in the calling + * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling * code. */ struct dentry *securityfs_create_file(const char *name, mode_t mode, @@ -252,19 +252,19 @@ EXPORT_SYMBOL_GPL(securityfs_create_file); * @name: a pointer to a string containing the name of the directory to * create. * @parent: a pointer to the parent dentry for this file. This should be a - * directory dentry if set. If this paramater is NULL, then the + * directory dentry if set. If this parameter is %NULL, then the * directory will be created in the root of the securityfs filesystem. * - * This function creates a directory in securityfs with the given name. + * This function creates a directory in securityfs with the given @name. * - * This function will return a pointer to a dentry if it succeeds. This + * This function returns a pointer to a dentry if it succeeds. This * pointer must be passed to the securityfs_remove() function when the file is * to be removed (no automatic cleanup happens if your module is unloaded, - * you are responsible here.) If an error occurs, NULL will be returned. + * you are responsible here). If an error occurs, %NULL will be returned. * - * If securityfs is not enabled in the kernel, the value -ENODEV will be + * If securityfs is not enabled in the kernel, the value %-ENODEV is * returned. It is not wise to check for this value, but rather, check for - * NULL or !NULL instead as to eliminate the need for #ifdef in the calling + * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling * code. */ struct dentry *securityfs_create_dir(const char *name, struct dentry *parent) @@ -278,16 +278,15 @@ EXPORT_SYMBOL_GPL(securityfs_create_dir); /** * securityfs_remove - removes a file or directory from the securityfs filesystem * - * @dentry: a pointer to a the dentry of the file or directory to be - * removed. + * @dentry: a pointer to a the dentry of the file or directory to be removed. * * This function removes a file or directory in securityfs that was previously * created with a call to another securityfs function (like * securityfs_create_file() or variants thereof.) * * This function is required to be called in order for the file to be - * removed, no automatic cleanup of files will happen when a module is - * removed, you are responsible here. + * removed. No automatic cleanup of files will happen when a module is + * removed; you are responsible here. */ void securityfs_remove(struct dentry *dentry) { diff --git a/security/security.c b/security/security.c index ff706872775..d953d251fdc 100644 --- a/security/security.c +++ b/security/security.c @@ -82,8 +82,8 @@ __setup("security=", choose_lsm); * * Return true if: * -The passed LSM is the one chosen by user at boot time, - * -or user didsn't specify a specific LSM and we're the first to ask - * for registeration permissoin, + * -or user didn't specify a specific LSM and we're the first to ask + * for registration permission, * -or the passed LSM is currently loaded. * Otherwise, return false. */ @@ -101,13 +101,13 @@ int __init security_module_enable(struct security_operations *ops) * register_security - registers a security framework with the kernel * @ops: a pointer to the struct security_options that is to be registered * - * This function is to allow a security module to register itself with the + * This function allows a security module to register itself with the * kernel security subsystem. Some rudimentary checking is done on the @ops * value passed to this function. You'll need to check first if your LSM * is allowed to register its @ops by calling security_module_enable(@ops). * * If there is already a security module registered with the kernel, - * an error will be returned. Otherwise 0 is returned on success. + * an error will be returned. Otherwise %0 is returned on success. */ int register_security(struct security_operations *ops) { -- cgit v1.2.3-70-g09d2 From f58e2c33ffa31b8d4a71609a5e71e8d893574a07 Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Wed, 20 Aug 2008 15:18:45 +0200 Subject: sched: new documentation about CFS Rewrite of the CFS documentation - because the old one was sorely out-dated. Signed-off-by: Claudio Scordino Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- Documentation/scheduler/sched-design-CFS.txt | 371 ++++++++++++++++----------- 1 file changed, 218 insertions(+), 153 deletions(-) (limited to 'Documentation') diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt index 88bcb876733..b2aa856339a 100644 --- a/Documentation/scheduler/sched-design-CFS.txt +++ b/Documentation/scheduler/sched-design-CFS.txt @@ -1,151 +1,218 @@ + ============= + CFS Scheduler + ============= -This is the CFS scheduler. - -80% of CFS's design can be summed up in a single sentence: CFS basically -models an "ideal, precise multi-tasking CPU" on real hardware. - -"Ideal multi-tasking CPU" is a (non-existent :-)) CPU that has 100% -physical power and which can run each task at precise equal speed, in -parallel, each at 1/nr_running speed. For example: if there are 2 tasks -running then it runs each at 50% physical power - totally in parallel. - -On real hardware, we can run only a single task at once, so while that -one task runs, the other tasks that are waiting for the CPU are at a -disadvantage - the current task gets an unfair amount of CPU time. In -CFS this fairness imbalance is expressed and tracked via the per-task -p->wait_runtime (nanosec-unit) value. "wait_runtime" is the amount of -time the task should now run on the CPU for it to become completely fair -and balanced. - -( small detail: on 'ideal' hardware, the p->wait_runtime value would - always be zero - no task would ever get 'out of balance' from the - 'ideal' share of CPU time. ) - -CFS's task picking logic is based on this p->wait_runtime value and it -is thus very simple: it always tries to run the task with the largest -p->wait_runtime value. In other words, CFS tries to run the task with -the 'gravest need' for more CPU time. So CFS always tries to split up -CPU time between runnable tasks as close to 'ideal multitasking -hardware' as possible. - -Most of the rest of CFS's design just falls out of this really simple -concept, with a few add-on embellishments like nice levels, -multiprocessing and various algorithm variants to recognize sleepers. - -In practice it works like this: the system runs a task a bit, and when -the task schedules (or a scheduler tick happens) the task's CPU usage is -'accounted for': the (small) time it just spent using the physical CPU -is deducted from p->wait_runtime. [minus the 'fair share' it would have -gotten anyway]. Once p->wait_runtime gets low enough so that another -task becomes the 'leftmost task' of the time-ordered rbtree it maintains -(plus a small amount of 'granularity' distance relative to the leftmost -task so that we do not over-schedule tasks and trash the cache) then the -new leftmost task is picked and the current task is preempted. - -The rq->fair_clock value tracks the 'CPU time a runnable task would have -fairly gotten, had it been runnable during that time'. So by using -rq->fair_clock values we can accurately timestamp and measure the -'expected CPU time' a task should have gotten. All runnable tasks are -sorted in the rbtree by the "rq->fair_clock - p->wait_runtime" key, and -CFS picks the 'leftmost' task and sticks to it. As the system progresses -forwards, newly woken tasks are put into the tree more and more to the -right - slowly but surely giving a chance for every task to become the -'leftmost task' and thus get on the CPU within a deterministic amount of -time. - -Some implementation details: - - - the introduction of Scheduling Classes: an extensible hierarchy of - scheduler modules. These modules encapsulate scheduling policy - details and are handled by the scheduler core without the core - code assuming about them too much. - - - sched_fair.c implements the 'CFS desktop scheduler': it is a - replacement for the vanilla scheduler's SCHED_OTHER interactivity - code. - - I'd like to give credit to Con Kolivas for the general approach here: - he has proven via RSDL/SD that 'fair scheduling' is possible and that - it results in better desktop scheduling. Kudos Con! - - The CFS patch uses a completely different approach and implementation - from RSDL/SD. My goal was to make CFS's interactivity quality exceed - that of RSDL/SD, which is a high standard to meet :-) Testing - feedback is welcome to decide this one way or another. [ and, in any - case, all of SD's logic could be added via a kernel/sched_sd.c module - as well, if Con is interested in such an approach. ] - - CFS's design is quite radical: it does not use runqueues, it uses a - time-ordered rbtree to build a 'timeline' of future task execution, - and thus has no 'array switch' artifacts (by which both the vanilla - scheduler and RSDL/SD are affected). - - CFS uses nanosecond granularity accounting and does not rely on any - jiffies or other HZ detail. Thus the CFS scheduler has no notion of - 'timeslices' and has no heuristics whatsoever. There is only one - central tunable (you have to switch on CONFIG_SCHED_DEBUG): - - /proc/sys/kernel/sched_granularity_ns - - which can be used to tune the scheduler from 'desktop' (low - latencies) to 'server' (good batching) workloads. It defaults to a - setting suitable for desktop workloads. SCHED_BATCH is handled by the - CFS scheduler module too. - - Due to its design, the CFS scheduler is not prone to any of the - 'attacks' that exist today against the heuristics of the stock - scheduler: fiftyp.c, thud.c, chew.c, ring-test.c, massive_intr.c all - work fine and do not impact interactivity and produce the expected - behavior. - - the CFS scheduler has a much stronger handling of nice levels and - SCHED_BATCH: both types of workloads should be isolated much more - agressively than under the vanilla scheduler. - - ( another detail: due to nanosec accounting and timeline sorting, - sched_yield() support is very simple under CFS, and in fact under - CFS sched_yield() behaves much better than under any other - scheduler i have tested so far. ) - - - sched_rt.c implements SCHED_FIFO and SCHED_RR semantics, in a simpler - way than the vanilla scheduler does. It uses 100 runqueues (for all - 100 RT priority levels, instead of 140 in the vanilla scheduler) - and it needs no expired array. - - - reworked/sanitized SMP load-balancing: the runqueue-walking - assumptions are gone from the load-balancing code now, and - iterators of the scheduling modules are used. The balancing code got - quite a bit simpler as a result. - - -Group scheduler extension to CFS -================================ - -Normally the scheduler operates on individual tasks and strives to provide -fair CPU time to each task. Sometimes, it may be desirable to group tasks -and provide fair CPU time to each such task group. For example, it may -be desirable to first provide fair CPU time to each user on the system -and then to each task belonging to a user. - -CONFIG_FAIR_GROUP_SCHED strives to achieve exactly that. It lets -SCHED_NORMAL/BATCH tasks be be grouped and divides CPU time fairly among such -groups. At present, there are two (mutually exclusive) mechanisms to group -tasks for CPU bandwidth control purpose: - - - Based on user id (CONFIG_FAIR_USER_SCHED) - In this option, tasks are grouped according to their user id. - - Based on "cgroup" pseudo filesystem (CONFIG_FAIR_CGROUP_SCHED) - This options lets the administrator create arbitrary groups - of tasks, using the "cgroup" pseudo filesystem. See - Documentation/cgroups.txt for more information about this - filesystem. -Only one of these options to group tasks can be chosen and not both. +1. OVERVIEW + +CFS stands for "Completely Fair Scheduler," and is the new "desktop" process +scheduler implemented by Ingo Molnar and merged in Linux 2.6.23. It is the +replacement for the previous vanilla scheduler's SCHED_OTHER interactivity +code. + +80% of CFS's design can be summed up in a single sentence: CFS basically models +an "ideal, precise multi-tasking CPU" on real hardware. + +"Ideal multi-tasking CPU" is a (non-existent :-)) CPU that has 100% physical +power and which can run each task at precise equal speed, in parallel, each at +1/nr_running speed. For example: if there are 2 tasks running, then it runs +each at 50% physical power --- i.e., actually in parallel. + +On real hardware, we can run only a single task at once, so we have to +introduce the concept of "virtual runtime." The virtual runtime of a task +specifies when its next timeslice would start execution on the ideal +multi-tasking CPU described above. In practice, the virtual runtime of a task +is its actual runtime normalized to the total number of running tasks. + + + +2. FEW IMPLEMENTATION DETAILS + +In CFS the virtual runtime is expressed and tracked via the per-task +p->se.vruntime (nanosec-unit) value. This way, it's possible to accurately +timestamp and measure the "expected CPU time" a task should have gotten. + +[ small detail: on "ideal" hardware, at any time all tasks would have the same + p->se.vruntime value --- i.e., tasks would execute simultaneously and no task + would ever get "out of balance" from the "ideal" share of CPU time. ] + +CFS's task picking logic is based on this p->se.vruntime value and it is thus +very simple: it always tries to run the task with the smallest p->se.vruntime +value (i.e., the task which executed least so far). CFS always tries to split +up CPU time between runnable tasks as close to "ideal multitasking hardware" as +possible. + +Most of the rest of CFS's design just falls out of this really simple concept, +with a few add-on embellishments like nice levels, multiprocessing and various +algorithm variants to recognize sleepers. + + + +3. THE RBTREE + +CFS's design is quite radical: it does not use the old data structures for the +runqueues, but it uses a time-ordered rbtree to build a "timeline" of future +task execution, and thus has no "array switch" artifacts (by which both the +previous vanilla scheduler and RSDL/SD are affected). + +CFS also maintains the rq->cfs.min_vruntime value, which is a monotonic +increasing value tracking the smallest vruntime among all tasks in the +runqueue. The total amount of work done by the system is tracked using +min_vruntime; that value is used to place newly activated entities on the left +side of the tree as much as possible. + +The total number of running tasks in the runqueue is accounted through the +rq->cfs.load value, which is the sum of the weights of the tasks queued on the +runqueue. + +CFS maintains a time-ordered rbtree, where all runnable tasks are sorted by the +p->se.vruntime key (there is a subtraction using rq->cfs.min_vruntime to +account for possible wraparounds). CFS picks the "leftmost" task from this +tree and sticks to it. +As the system progresses forwards, the executed tasks are put into the tree +more and more to the right --- slowly but surely giving a chance for every task +to become the "leftmost task" and thus get on the CPU within a deterministic +amount of time. + +Summing up, CFS works like this: it runs a task a bit, and when the task +schedules (or a scheduler tick happens) the task's CPU usage is "accounted +for": the (small) time it just spent using the physical CPU is added to +p->se.vruntime. Once p->se.vruntime gets high enough so that another task +becomes the "leftmost task" of the time-ordered rbtree it maintains (plus a +small amount of "granularity" distance relative to the leftmost task so that we +do not over-schedule tasks and trash the cache), then the new leftmost task is +picked and the current task is preempted. + + + +4. SOME FEATURES OF CFS + +CFS uses nanosecond granularity accounting and does not rely on any jiffies or +other HZ detail. Thus the CFS scheduler has no notion of "timeslices" in the +way the previous scheduler had, and has no heuristics whatsoever. There is +only one central tunable (you have to switch on CONFIG_SCHED_DEBUG): + + /proc/sys/kernel/sched_granularity_ns + +which can be used to tune the scheduler from "desktop" (i.e., low latencies) to +"server" (i.e., good batching) workloads. It defaults to a setting suitable +for desktop workloads. SCHED_BATCH is handled by the CFS scheduler module too. + +Due to its design, the CFS scheduler is not prone to any of the "attacks" that +exist today against the heuristics of the stock scheduler: fiftyp.c, thud.c, +chew.c, ring-test.c, massive_intr.c all work fine and do not impact +interactivity and produce the expected behavior. + +The CFS scheduler has a much stronger handling of nice levels and SCHED_BATCH +than the previous vanilla scheduler: both types of workloads are isolated much +more aggressively. + +SMP load-balancing has been reworked/sanitized: the runqueue-walking +assumptions are gone from the load-balancing code now, and iterators of the +scheduling modules are used. The balancing code got quite a bit simpler as a +result. + + + +5. SCHEDULING CLASSES + +The new CFS scheduler has been designed in such a way to introduce "Scheduling +Classes," an extensible hierarchy of scheduler modules. These modules +encapsulate scheduling policy details and are handled by the scheduler core +without the core code assuming too much about them. + +sched_fair.c implements the CFS scheduler described above. -Group scheduler tunables: +sched_rt.c implements SCHED_FIFO and SCHED_RR semantics, in a simpler way than +the previous vanilla scheduler did. It uses 100 runqueues (for all 100 RT +priority levels, instead of 140 in the previous scheduler) and it needs no +expired array. -When CONFIG_FAIR_USER_SCHED is defined, a directory is created in sysfs for -each new user and a "cpu_share" file is added in that directory. +Scheduling classes are implemented through the sched_class structure, which +contains hooks to functions that must be called whenever an interesting event +occurs. + +This is the (partial) list of the hooks: + + - enqueue_task(...) + + Called when a task enters a runnable state. + It puts the scheduling entity (task) into the red-black tree and + increments the nr_running variable. + + - dequeue_tree(...) + + When a task is no longer runnable, this function is called to keep the + corresponding scheduling entity out of the red-black tree. It decrements + the nr_running variable. + + - yield_task(...) + + This function is basically just a dequeue followed by an enqueue, unless the + compat_yield sysctl is turned on; in that case, it places the scheduling + entity at the right-most end of the red-black tree. + + - check_preempt_curr(...) + + This function checks if a task that entered the runnable state should + preempt the currently running task. + + - pick_next_task(...) + + This function chooses the most appropriate task eligible to run next. + + - set_curr_task(...) + + This function is called when a task changes its scheduling class or changes + its task group. + + - task_tick(...) + + This function is mostly called from time tick functions; it might lead to + process switch. This drives the running preemption. + + - task_new(...) + + The core scheduler gives the scheduling module an opportunity to manage new + task startup. The CFS scheduling module uses it for group scheduling, while + the scheduling module for a real-time task does not use it. + + + +6. GROUP SCHEDULER EXTENSIONS TO CFS + +Normally, the scheduler operates on individual tasks and strives to provide +fair CPU time to each task. Sometimes, it may be desirable to group tasks and +provide fair CPU time to each such task group. For example, it may be +desirable to first provide fair CPU time to each user on the system and then to +each task belonging to a user. + +CONFIG_GROUP_SCHED strives to achieve exactly that. It lets tasks to be +grouped and divides CPU time fairly among such groups. + +CONFIG_RT_GROUP_SCHED permits to group real-time (i.e., SCHED_FIFO and +SCHED_RR) tasks. + +CONFIG_FAIR_GROUP_SCHED permits to group CFS (i.e., SCHED_NORMAL and +SCHED_BATCH) tasks. + +At present, there are two (mutually exclusive) mechanisms to group tasks for +CPU bandwidth control purposes: + + - Based on user id (CONFIG_USER_SCHED) + + With this option, tasks are grouped according to their user id. + + - Based on "cgroup" pseudo filesystem (CONFIG_CGROUP_SCHED) + + This options needs CONFIG_CGROUPS to be defined, and lets the administrator + create arbitrary groups of tasks, using the "cgroup" pseudo filesystem. See + Documentation/cgroups.txt for more information about this filesystem. + +Only one of these options to group tasks can be chosen and not both. + +When CONFIG_USER_SCHED is defined, a directory is created in sysfs for each new +user and a "cpu_share" file is added in that directory. # cd /sys/kernel/uids # cat 512/cpu_share # Display user 512's CPU share @@ -155,16 +222,14 @@ each new user and a "cpu_share" file is added in that directory. 2048 # -CPU bandwidth between two users are divided in the ratio of their CPU shares. -For ex: if you would like user "root" to get twice the bandwidth of user -"guest", then set the cpu_share for both the users such that "root"'s -cpu_share is twice "guest"'s cpu_share - +CPU bandwidth between two users is divided in the ratio of their CPU shares. +For example: if you would like user "root" to get twice the bandwidth of user +"guest," then set the cpu_share for both the users such that "root"'s cpu_share +is twice "guest"'s cpu_share. -When CONFIG_FAIR_CGROUP_SCHED is defined, a "cpu.shares" file is created -for each group created using the pseudo filesystem. See example steps -below to create task groups and modify their CPU share using the "cgroups" -pseudo filesystem +When CONFIG_CGROUP_SCHED is defined, a "cpu.shares" file is created for each +group created using the pseudo filesystem. See example steps below to create +task groups and modify their CPU share using the "cgroups" pseudo filesystem. # mkdir /dev/cpuctl # mount -t cgroup -ocpu none /dev/cpuctl -- cgit v1.2.3-70-g09d2 From 59dfc3f8fbabb8681ab4f2fb2df795f9211f40f9 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Wed, 20 Aug 2008 16:45:54 -0700 Subject: x86: PAT documentation updates with debug info Documentation update for PAT. Reflect the latest API details. Also, adds details about ways to get more info in order to debug PAT. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Ingo Molnar --- Documentation/x86/pat.txt | 54 +++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 45 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/x86/pat.txt b/Documentation/x86/pat.txt index 17965f927c1..c93ff5f4c0d 100644 --- a/Documentation/x86/pat.txt +++ b/Documentation/x86/pat.txt @@ -14,6 +14,10 @@ PAT allows for different types of memory attributes. The most commonly used ones that will be supported at this time are Write-back, Uncached, Write-combined and Uncached Minus. + +PAT APIs +-------- + There are many different APIs in the kernel that allows setting of memory attributes at the page level. In order to avoid aliasing, these interfaces should be used thoughtfully. Below is a table of interfaces available, @@ -26,38 +30,38 @@ address range to avoid any aliasing. API | RAM | ACPI,... | Reserved/Holes | -----------------------|----------|------------|------------------| | | | | -ioremap | -- | UC | UC | +ioremap | -- | UC- | UC- | | | | | ioremap_cache | -- | WB | WB | | | | | -ioremap_nocache | -- | UC | UC | +ioremap_nocache | -- | UC- | UC- | | | | | ioremap_wc | -- | -- | WC | | | | | -set_memory_uc | UC | -- | -- | +set_memory_uc | UC- | -- | -- | set_memory_wb | | | | | | | | set_memory_wc | WC | -- | -- | set_memory_wb | | | | | | | | -pci sysfs resource | -- | -- | UC | +pci sysfs resource | -- | -- | UC- | | | | | pci sysfs resource_wc | -- | -- | WC | is IORESOURCE_PREFETCH| | | | | | | | -pci proc | -- | -- | UC | +pci proc | -- | -- | UC- | !PCIIOC_WRITE_COMBINE | | | | | | | | pci proc | -- | -- | WC | PCIIOC_WRITE_COMBINE | | | | | | | | -/dev/mem | -- | UC | UC | +/dev/mem | -- | WB/WC/UC- | WB/WC/UC- | read-write | | | | | | | | -/dev/mem | -- | UC | UC | +/dev/mem | -- | UC- | UC- | mmap SYNC flag | | | | | | | | -/dev/mem | -- | WB/WC/UC | WB/WC/UC | +/dev/mem | -- | WB/WC/UC- | WB/WC/UC- | mmap !SYNC flag | |(from exist-| (from exist- | and | | ing alias)| ing alias) | any alias to this area| | | | @@ -68,7 +72,7 @@ pci proc | -- | -- | WC | and | | | | MTRR says WB | | | | | | | | -/dev/mem | -- | -- | UC_MINUS | +/dev/mem | -- | -- | UC- | mmap !SYNC flag | | | | no alias to this area | | | | and | | | | @@ -98,3 +102,35 @@ types. Drivers should use set_memory_[uc|wc] to set access type for RAM ranges. + +PAT debugging +------------- + +With CONFIG_DEBUG_FS enabled, PAT memtype list can be examined by + +# mount -t debugfs debugfs /sys/kernel/debug +# cat /sys/kernel/debug/x86/pat_memtype_list +PAT memtype list: +uncached-minus @ 0x7fadf000-0x7fae0000 +uncached-minus @ 0x7fb19000-0x7fb1a000 +uncached-minus @ 0x7fb1a000-0x7fb1b000 +uncached-minus @ 0x7fb1b000-0x7fb1c000 +uncached-minus @ 0x7fb1c000-0x7fb1d000 +uncached-minus @ 0x7fb1d000-0x7fb1e000 +uncached-minus @ 0x7fb1e000-0x7fb25000 +uncached-minus @ 0x7fb25000-0x7fb26000 +uncached-minus @ 0x7fb26000-0x7fb27000 +uncached-minus @ 0x7fb27000-0x7fb28000 +uncached-minus @ 0x7fb28000-0x7fb2e000 +uncached-minus @ 0x7fb2e000-0x7fb2f000 +uncached-minus @ 0x7fb2f000-0x7fb30000 +uncached-minus @ 0x7fb31000-0x7fb32000 +uncached-minus @ 0x80000000-0x90000000 + +This list shows physical address ranges and various PAT settings used to +access those physical address ranges. + +Another, more verbose way of getting PAT related debug messages is with +"debugpat" boot parameter. With this parameter, various debug messages are +printed to dmesg log. + -- cgit v1.2.3-70-g09d2 From b05f78f5c713eda2c34e495d92495ee4f1c3b5e1 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 22 Aug 2008 01:32:50 -0700 Subject: x86_64: printout msr -v2 commandline show_msr=1 for bsp, show_msr=32 for all 32 cpus. [ mingo@elte.hu: added documentation ] Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 6 +++++ arch/x86/kernel/cpu/common_64.c | 51 +++++++++++++++++++++++++++++++++++++ arch/x86/kernel/paravirt.c | 1 + include/asm-x86/msr.h | 23 +++++++++++++++++ include/asm-x86/paravirt.h | 12 +++++++++ 5 files changed, 93 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 47e7d8794fc..8679e80b9fc 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1852,6 +1852,12 @@ and is between 256 and 4096 characters. It is defined in the file shapers= [NET] Maximal number of shapers. + show_msr= [x86] show boot-time MSR settings + Format: { } + Show boot-time (BIOS-initialized) MSR settings. + The parameter means the number of CPUs to show, + for example 1 means boot CPU only. + sim710= [SCSI,HW] See header of drivers/scsi/sim710.c. diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c index dd6e3f15017..bca2d6980e8 100644 --- a/arch/x86/kernel/cpu/common_64.c +++ b/arch/x86/kernel/cpu/common_64.c @@ -394,6 +394,49 @@ static __init int setup_noclflush(char *arg) } __setup("noclflush", setup_noclflush); +struct msr_range { + unsigned min; + unsigned max; +}; + +static struct msr_range msr_range_array[] __cpuinitdata = { + { 0x00000000, 0x00000418}, + { 0xc0000000, 0xc000040b}, + { 0xc0010000, 0xc0010142}, + { 0xc0011000, 0xc001103b}, +}; + +static void __cpuinit print_cpu_msr(void) +{ + unsigned index; + u64 val; + int i; + unsigned index_min, index_max; + + for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) { + index_min = msr_range_array[i].min; + index_max = msr_range_array[i].max; + for (index = index_min; index < index_max; index++) { + if (rdmsrl_amd_safe(index, &val)) + continue; + printk(KERN_INFO " MSR%08x: %016llx\n", index, val); + } + } +} + +static int show_msr __cpuinitdata; +static __init int setup_show_msr(char *arg) +{ + int num; + + get_option(&arg, &num); + + if (num > 0) + show_msr = num; + return 1; +} +__setup("show_msr=", setup_show_msr); + void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) { if (c->x86_model_id[0]) @@ -403,6 +446,14 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) printk(KERN_CONT " stepping %02x\n", c->x86_mask); else printk(KERN_CONT "\n"); + +#ifdef CONFIG_SMP + if (c->cpu_index < show_msr) + print_cpu_msr(); +#else + if (show_msr) + print_cpu_msr(); +#endif } static __init int setup_disablecpuid(char *arg) diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 94da4d52d79..c6044682e1e 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -330,6 +330,7 @@ struct pv_cpu_ops pv_cpu_ops = { #endif .wbinvd = native_wbinvd, .read_msr = native_read_msr_safe, + .read_msr_amd = native_read_msr_amd_safe, .write_msr = native_write_msr_safe, .read_tsc = native_read_tsc, .read_pmc = native_read_pmc, diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h index ca110ee73f0..a30e586df93 100644 --- a/include/asm-x86/msr.h +++ b/include/asm-x86/msr.h @@ -63,6 +63,22 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr, return EAX_EDX_VAL(val, low, high); } +static inline unsigned long long native_read_msr_amd_safe(unsigned int msr, + int *err) +{ + DECLARE_ARGS(val, low, high); + + asm volatile("2: rdmsr ; xor %0,%0\n" + "1:\n\t" + ".section .fixup,\"ax\"\n\t" + "3: mov %3,%0 ; jmp 1b\n\t" + ".previous\n\t" + _ASM_EXTABLE(2b, 3b) + : "=r" (*err), EAX_EDX_RET(val, low, high) + : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT)); + return EAX_EDX_VAL(val, low, high); +} + static inline void native_write_msr(unsigned int msr, unsigned low, unsigned high) { @@ -158,6 +174,13 @@ static inline int rdmsrl_safe(unsigned msr, unsigned long long *p) *p = native_read_msr_safe(msr, &err); return err; } +static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p) +{ + int err; + + *p = native_read_msr_amd_safe(msr, &err); + return err; +} #define rdtscl(low) \ ((low) = (u32)native_read_tsc()) diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h index fbbde93f12d..d5cfc5e3eb5 100644 --- a/include/asm-x86/paravirt.h +++ b/include/asm-x86/paravirt.h @@ -137,6 +137,7 @@ struct pv_cpu_ops { /* MSR, PMC and TSR operations. err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */ + u64 (*read_msr_amd)(unsigned int msr, int *err); u64 (*read_msr)(unsigned int msr, int *err); int (*write_msr)(unsigned int msr, unsigned low, unsigned high); @@ -726,6 +727,10 @@ static inline u64 paravirt_read_msr(unsigned msr, int *err) { return PVOP_CALL2(u64, pv_cpu_ops.read_msr, msr, err); } +static inline u64 paravirt_read_msr_amd(unsigned msr, int *err) +{ + return PVOP_CALL2(u64, pv_cpu_ops.read_msr_amd, msr, err); +} static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high) { return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high); @@ -771,6 +776,13 @@ static inline int rdmsrl_safe(unsigned msr, unsigned long long *p) *p = paravirt_read_msr(msr, &err); return err; } +static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p) +{ + int err; + + *p = paravirt_read_msr_amd(msr, &err); + return err; +} static inline u64 paravirt_read_tsc(void) { -- cgit v1.2.3-70-g09d2 From a804b574e6c7236222593046fc2b1b8bd0298fce Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 29 Jul 2008 08:38:30 +0200 Subject: pcmcia: add pcmcia_loop_config() helper By calling pcmcia_loop_config(), a pcmcia driver can iterate over all available configuration options. During a driver's probe() phase, one doesn't need to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data and pcmcia_parse_tuple directly in most if not all cases. Signed-off-by: Dominik Brodowski --- Documentation/pcmcia/driver-changes.txt | 6 ++++ drivers/pcmcia/pcmcia_resource.c | 62 +++++++++++++++++++++++++++++++++ include/pcmcia/cistpl.h | 6 ++++ 3 files changed, 74 insertions(+) (limited to 'Documentation') diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt index 96f155e6875..059934363ca 100644 --- a/Documentation/pcmcia/driver-changes.txt +++ b/Documentation/pcmcia/driver-changes.txt @@ -1,5 +1,11 @@ This file details changes in 2.6 which affect PCMCIA card driver authors: +* New configuration loop helper (as of 2.6.28) + By calling pcmcia_loop_config(), a driver can iterate over all available + configuration options. During a driver's probe() phase, one doesn't need + to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data and + pcmcia_parse_tuple directly in most if not all cases. + * New release helper (as of 2.6.17) Instead of calling pcmcia_release_{configuration,io,irq,win}, all that's necessary now is calling pcmcia_disable_device. As there is no valid diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 4884a18cf9e..9f054bc847f 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -909,3 +909,65 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev) { pcmcia_release_window(p_dev->win); } EXPORT_SYMBOL(pcmcia_disable_device); + + +struct pcmcia_cfg_mem { + tuple_t tuple; + cisparse_t parse; + u8 buf[256]; +}; + +/** + * pcmcia_loop_config() - loop over configuration options + * @p_dev: the struct pcmcia_device which we need to loop for. + * @conf_check: function to call for each configuration option. + * It gets passed the struct pcmcia_device, the CIS data + * describing the configuration option, and private data + * being passed to pcmcia_loop_config() + * @priv_data: private data to be passed to the conf_check function. + * + * pcmcia_loop_config() loops over all configuration options, and calls + * the driver-specific conf_check() for each one, checking whether + * it is a valid one. + */ +int pcmcia_loop_config(struct pcmcia_device *p_dev, + int (*conf_check) (struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + void *priv_data), + void *priv_data) +{ + struct pcmcia_cfg_mem *cfg_mem; + tuple_t *tuple; + int ret = -ENODEV; + + cfg_mem = kzalloc(sizeof(struct pcmcia_cfg_mem), GFP_KERNEL); + if (cfg_mem == NULL) + return -ENOMEM; + + tuple = &cfg_mem->tuple; + tuple->TupleData = cfg_mem->buf; + tuple->TupleDataMax = 255; + tuple->TupleOffset = 0; + tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; + tuple->Attributes = 0; + + ret = pcmcia_get_first_tuple(p_dev, tuple); + while (!ret) { + if (pcmcia_get_tuple_data(p_dev, tuple)) + goto next_entry; + + if (pcmcia_parse_tuple(p_dev, tuple, &cfg_mem->parse)) + goto next_entry; + + ret = conf_check(p_dev, &cfg_mem->parse.cftable_entry, + priv_data); + if (!ret) + break; + +next_entry: + ret = pcmcia_get_next_tuple(p_dev, tuple); + } + + return ret; +} +EXPORT_SYMBOL(pcmcia_loop_config); diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h index e2e10c1e9a0..b2eb914a18d 100644 --- a/include/pcmcia/cistpl.h +++ b/include/pcmcia/cistpl.h @@ -613,4 +613,10 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned #define pcmcia_validate_cis(p_dev, info) \ pccard_validate_cis(p_dev->socket, p_dev->func, info) +int pcmcia_loop_config(struct pcmcia_device *p_dev, + int (*conf_check) (struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + void *priv_data), + void *priv_data); + #endif /* LINUX_CISTPL_H */ -- cgit v1.2.3-70-g09d2 From 9e44c6e40fb383e6b1d0df0c9e375a98e11828d1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 18 Aug 2008 13:53:07 +0200 Subject: ALSA: hda - Add AD1882A codec support Added the basic support of AD1882A codec chip. It's almost compatible with AD1882, but with a digital mic and some differences in connections. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 +- sound/pci/hda/patch_analog.c | 74 +++++++++++++++++++------ 2 files changed, 58 insertions(+), 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index b33e030509f..02a7194a10c 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -931,7 +931,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. allout 5-jack in back, 2-jack in front, SPDIF out auto auto-config reading BIOS (default) - AD1882 + AD1882 / AD1882A 3stack 3-stack mode (default) 6stack 6-stack mode diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index b6d64cc0787..0899b6b3886 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3917,7 +3917,7 @@ static int patch_ad1884a(struct hda_codec *codec) /* - * AD1882 + * AD1882 / AD1882A * * port-A - front hp-out * port-B - front mic-in @@ -3954,6 +3954,18 @@ static struct hda_input_mux ad1882_capture_source = { }, }; +/* list: 0x11, 0x39, 0x3a, 0x3c, 0x18, 0x1f, 0x12, 0x20 */ +static struct hda_input_mux ad1882a_capture_source = { + .num_items = 5, + .items = { + { "Front Mic", 0x1 }, + { "Mic", 0x4}, + { "Line", 0x2 }, + { "Digital Mic", 0x06 }, + { "Mix", 0x7 }, + }, +}; + static struct snd_kcontrol_new ad1882_base_mixers[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x04, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT), @@ -3963,16 +3975,7 @@ static struct snd_kcontrol_new ad1882_base_mixers[] = { HDA_CODEC_MUTE("Front Playback Switch", 0x12, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x13, 1, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x13, 1, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x20, 0x00, HDA_INPUT), - HDA_CODEC_MUTE("Front Mic Playback Switch", 0x20, 0x00, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x01, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x01, HDA_INPUT), - HDA_CODEC_VOLUME("Line Playback Volume", 0x20, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("Line Playback Switch", 0x20, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x20, 0x06, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x20, 0x06, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x07, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x07, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x3c, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x39, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Line-In Boost", 0x3a, 0x0, HDA_OUTPUT), @@ -4005,6 +4008,35 @@ static struct snd_kcontrol_new ad1882_base_mixers[] = { { } /* end */ }; +static struct snd_kcontrol_new ad1882_loopback_mixers[] = { + HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x20, 0x00, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Playback Switch", 0x20, 0x00, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x01, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x20, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x20, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x20, 0x06, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x20, 0x06, HDA_INPUT), + HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x07, HDA_INPUT), + HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x07, HDA_INPUT), + { } /* end */ +}; + +static struct snd_kcontrol_new ad1882a_loopback_mixers[] = { + HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x20, 0x00, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Playback Switch", 0x20, 0x00, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x20, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x20, 0x01, HDA_INPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x20, 0x06, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x20, 0x06, HDA_INPUT), + HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x07, HDA_INPUT), + HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x07, HDA_INPUT), + HDA_CODEC_VOLUME("Digital Mic Boost", 0x1f, 0x0, HDA_INPUT), + { } /* end */ +}; + static struct snd_kcontrol_new ad1882_3stack_mixers[] = { HDA_CODEC_MUTE("Surround Playback Switch", 0x15, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x17, 1, 0x0, HDA_OUTPUT), @@ -4174,9 +4206,16 @@ static int patch_ad1882(struct hda_codec *codec) spec->num_adc_nids = ARRAY_SIZE(ad1882_adc_nids); spec->adc_nids = ad1882_adc_nids; spec->capsrc_nids = ad1882_capsrc_nids; - spec->input_mux = &ad1882_capture_source; - spec->num_mixers = 1; + if (codec->vendor_id == 0x11d1882) + spec->input_mux = &ad1882_capture_source; + else + spec->input_mux = &ad1882a_capture_source; + spec->num_mixers = 2; spec->mixers[0] = ad1882_base_mixers; + if (codec->vendor_id == 0x11d1882) + spec->mixers[1] = ad1882_loopback_mixers; + else + spec->mixers[1] = ad1882a_loopback_mixers; spec->num_init_verbs = 1; spec->init_verbs[0] = ad1882_init_verbs; spec->spdif_route = 0; @@ -4193,8 +4232,8 @@ static int patch_ad1882(struct hda_codec *codec) switch (board_config) { default: case AD1882_3STACK: - spec->num_mixers = 2; - spec->mixers[1] = ad1882_3stack_mixers; + spec->num_mixers = 3; + spec->mixers[2] = ad1882_3stack_mixers; spec->channel_mode = ad1882_modes; spec->num_channel_mode = ARRAY_SIZE(ad1882_modes); spec->need_dac_fix = 1; @@ -4202,8 +4241,8 @@ static int patch_ad1882(struct hda_codec *codec) spec->multiout.num_dacs = 1; break; case AD1882_6STACK: - spec->num_mixers = 2; - spec->mixers[1] = ad1882_6stack_mixers; + spec->num_mixers = 3; + spec->mixers[2] = ad1882_6stack_mixers; break; } return 0; @@ -4226,6 +4265,7 @@ struct hda_codec_preset snd_hda_preset_analog[] = { { .id = 0x11d41986, .name = "AD1986A", .patch = patch_ad1986a }, { .id = 0x11d41988, .name = "AD1988", .patch = patch_ad1988 }, { .id = 0x11d4198b, .name = "AD1988B", .patch = patch_ad1988 }, + { .id = 0x11d4882a, .name = "AD1882A", .patch = patch_ad1882 }, { .id = 0x11d4989a, .name = "AD1989A", .patch = patch_ad1988 }, { .id = 0x11d4989b, .name = "AD1989B", .patch = patch_ad1988 }, {} /* terminator */ -- cgit v1.2.3-70-g09d2 From 65eb3dc609dec17deea48dcd4de2e549d29a9824 Mon Sep 17 00:00:00 2001 From: Kevin Diggs Date: Tue, 26 Aug 2008 10:26:54 +0200 Subject: sched: add kernel doc for the completion, fix kernel-doc-nano-HOWTO.txt This patch adds kernel doc for the completion feature. An error in the split-man.pl PERL snippet in kernel-doc-nano-HOWTO.txt is also fixed. Signed-off-by: Kevin Diggs Signed-off-by: Ingo Molnar --- Documentation/kernel-doc-nano-HOWTO.txt | 4 +-- include/linux/completion.h | 41 ++++++++++++++++++++++++ kernel/sched.c | 56 +++++++++++++++++++++++++++++++++ 3 files changed, 99 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt index 0bd32748a46..c6841eee959 100644 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ b/Documentation/kernel-doc-nano-HOWTO.txt @@ -168,10 +168,10 @@ if ($#ARGV < 0) { mkdir $ARGV[0],0777; $state = 0; while () { - if (/^\.TH \"[^\"]*\" 4 \"([^\"]*)\"/) { + if (/^\.TH \"[^\"]*\" 9 \"([^\"]*)\"/) { if ($state == 1) { close OUT } $state = 1; - $fn = "$ARGV[0]/$1.4"; + $fn = "$ARGV[0]/$1.9"; print STDERR "Creating $fn\n"; open OUT, ">$fn" or die "can't open $fn: $!\n"; print OUT $_; diff --git a/include/linux/completion.h b/include/linux/completion.h index 02ef8835999..4a6b604ef7e 100644 --- a/include/linux/completion.h +++ b/include/linux/completion.h @@ -10,6 +10,18 @@ #include +/** + * struct completion - structure used to maintain state for a "completion" + * + * This is the opaque structure used to maintain the state for a "completion". + * Completions currently use a FIFO to queue threads that have to wait for + * the "completion" event. + * + * See also: complete(), wait_for_completion() (and friends _timeout, + * _interruptible, _interruptible_timeout, and _killable), init_completion(), + * and macros DECLARE_COMPLETION(), DECLARE_COMPLETION_ONSTACK(), and + * INIT_COMPLETION(). + */ struct completion { unsigned int done; wait_queue_head_t wait; @@ -21,6 +33,14 @@ struct completion { #define COMPLETION_INITIALIZER_ONSTACK(work) \ ({ init_completion(&work); work; }) +/** + * DECLARE_COMPLETION: - declare and initialize a completion structure + * @work: identifier for the completion structure + * + * This macro declares and initializes a completion structure. Generally used + * for static declarations. You should use the _ONSTACK variant for automatic + * variables. + */ #define DECLARE_COMPLETION(work) \ struct completion work = COMPLETION_INITIALIZER(work) @@ -29,6 +49,13 @@ struct completion { * completions - so we use the _ONSTACK() variant for those that * are on the kernel stack: */ +/** + * DECLARE_COMPLETION_ONSTACK: - declare and initialize a completion structure + * @work: identifier for the completion structure + * + * This macro declares and initializes a completion structure on the kernel + * stack. + */ #ifdef CONFIG_LOCKDEP # define DECLARE_COMPLETION_ONSTACK(work) \ struct completion work = COMPLETION_INITIALIZER_ONSTACK(work) @@ -36,6 +63,13 @@ struct completion { # define DECLARE_COMPLETION_ONSTACK(work) DECLARE_COMPLETION(work) #endif +/** + * init_completion: - Initialize a dynamically allocated completion + * @x: completion structure that is to be initialized + * + * This inline function will initialize a dynamically created completion + * structure. + */ static inline void init_completion(struct completion *x) { x->done = 0; @@ -55,6 +89,13 @@ extern bool completion_done(struct completion *x); extern void complete(struct completion *); extern void complete_all(struct completion *); +/** + * INIT_COMPLETION: - reinitialize a completion structure + * @x: completion structure to be reinitialized + * + * This macro should be used to reinitialize a completion structure so it can + * be reused. This is especially important after complete_all() is used. + */ #define INIT_COMPLETION(x) ((x).done = 0) diff --git a/kernel/sched.c b/kernel/sched.c index 29e2ec0bd83..93f5ea08be9 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4565,6 +4565,15 @@ __wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr_exclusive) } EXPORT_SYMBOL_GPL(__wake_up_sync); /* For internal use only */ +/** + * complete: - signals a single thread waiting on this completion + * @x: holds the state of this particular completion + * + * This will wake up a single thread waiting on this completion. Threads will be + * awakened in the same order in which they were queued. + * + * See also complete_all(), wait_for_completion() and related routines. + */ void complete(struct completion *x) { unsigned long flags; @@ -4576,6 +4585,12 @@ void complete(struct completion *x) } EXPORT_SYMBOL(complete); +/** + * complete_all: - signals all threads waiting on this completion + * @x: holds the state of this particular completion + * + * This will wake up all threads waiting on this particular completion event. + */ void complete_all(struct completion *x) { unsigned long flags; @@ -4624,12 +4639,31 @@ wait_for_common(struct completion *x, long timeout, int state) return timeout; } +/** + * wait_for_completion: - waits for completion of a task + * @x: holds the state of this particular completion + * + * This waits to be signaled for completion of a specific task. It is NOT + * interruptible and there is no timeout. + * + * See also similar routines (i.e. wait_for_completion_timeout()) with timeout + * and interrupt capability. Also see complete(). + */ void __sched wait_for_completion(struct completion *x) { wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_UNINTERRUPTIBLE); } EXPORT_SYMBOL(wait_for_completion); +/** + * wait_for_completion_timeout: - waits for completion of a task (w/timeout) + * @x: holds the state of this particular completion + * @timeout: timeout value in jiffies + * + * This waits for either a completion of a specific task to be signaled or for a + * specified timeout to expire. The timeout is in jiffies. It is not + * interruptible. + */ unsigned long __sched wait_for_completion_timeout(struct completion *x, unsigned long timeout) { @@ -4637,6 +4671,13 @@ wait_for_completion_timeout(struct completion *x, unsigned long timeout) } EXPORT_SYMBOL(wait_for_completion_timeout); +/** + * wait_for_completion_interruptible: - waits for completion of a task (w/intr) + * @x: holds the state of this particular completion + * + * This waits for completion of a specific task to be signaled. It is + * interruptible. + */ int __sched wait_for_completion_interruptible(struct completion *x) { long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_INTERRUPTIBLE); @@ -4646,6 +4687,14 @@ int __sched wait_for_completion_interruptible(struct completion *x) } EXPORT_SYMBOL(wait_for_completion_interruptible); +/** + * wait_for_completion_interruptible_timeout: - waits for completion (w/(to,intr)) + * @x: holds the state of this particular completion + * @timeout: timeout value in jiffies + * + * This waits for either a completion of a specific task to be signaled or for a + * specified timeout to expire. It is interruptible. The timeout is in jiffies. + */ unsigned long __sched wait_for_completion_interruptible_timeout(struct completion *x, unsigned long timeout) @@ -4654,6 +4703,13 @@ wait_for_completion_interruptible_timeout(struct completion *x, } EXPORT_SYMBOL(wait_for_completion_interruptible_timeout); +/** + * wait_for_completion_killable: - waits for completion of a task (killable) + * @x: holds the state of this particular completion + * + * This waits to be signaled for completion of a specific task. It can be + * interrupted by a kill signal. + */ int __sched wait_for_completion_killable(struct completion *x) { long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_KILLABLE); -- cgit v1.2.3-70-g09d2 From 93c06cbbf9fea5d5be1778febb7fa9ab1a74e5f5 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Tue, 26 Aug 2008 14:47:57 -0500 Subject: selinux: add support for installing a dummy policy (v2) In August 2006 I posted a patch generating a minimal SELinux policy. This week, David P. Quigley posted an updated version of that as a patch against the kernel. It also had nice logic for auto-installing the policy. Following is David's original patch intro (preserved especially bc it has stats on the generated policies): se interested in the changes there were only two significant changes. The first is that the iteration through the list of classes used NULL as a sentinel value. The problem with this is that the class_to_string array actually has NULL entries in its table as place holders for the user space object classes. The second change was that it would seem at some point the initial sids table was NULL terminated. This is no longer the case so that iteration has to be done on array length instead of looking for NULL. Some statistics on the policy that it generates: The policy consists of 523 lines which contain no blank lines. Of those 523 lines 453 of them are class, permission, and initial sid definitions. These lines are usually little to no concern to the policy developer since they will not be adding object classes or permissions. Of the remaining 70 lines there is one type, one role, and one user statement. The remaining lines are broken into three portions. The first group are TE allow rules which make up 29 of the remaining lines, the second is assignment of labels to the initial sids which consist of 27 lines, and file system labeling statements which are the remaining 11. In addition to the policy.conf generated there is a single file_contexts file containing two lines which labels the entire system with base_t. This policy generates a policy.23 binary that is 7920 bytes. (then a few versions later...): The new policy is 587 lines (stripped of blank lines) with 476 of those lines being the boilerplate that I mentioned last time. The remaining 111 lines have the 3 lines for type, user, and role, 70 lines for the allow rules (one for each object class including user space object classes), 27 lines to assign types to the initial sids, and 11 lines for file system labeling. The policy binary is 9194 bytes. Changelog: Aug 26: Added Documentation/SELinux.txt Aug 26: Incorporated a set of comments by Stephen Smalley: 1. auto-setup SELINUXTYPE=dummy 2. don't auto-install if selinux is enabled with non-dummy policy 3. don't re-compute policy version 4. /sbin/setfiles not /usr/sbin/setfiles Aug 22: As per JMorris comments, made sure make distclean cleans up the mdp directory. Removed a check for file_contexts which is now created in the same file as the check, making it superfluous. Signed-off-by: Serge Hallyn Signed-off-by: David Quigley Signed-off-by: James Morris --- Documentation/SELinux.txt | 27 +++++ scripts/Makefile | 3 +- scripts/selinux/Makefile | 2 + scripts/selinux/README | 2 + scripts/selinux/install_policy.sh | 69 +++++++++++ scripts/selinux/mdp/Makefile | 5 + scripts/selinux/mdp/dbus_contexts | 6 + scripts/selinux/mdp/mdp.c | 242 ++++++++++++++++++++++++++++++++++++++ 8 files changed, 355 insertions(+), 1 deletion(-) create mode 100644 Documentation/SELinux.txt create mode 100644 scripts/selinux/Makefile create mode 100644 scripts/selinux/README create mode 100644 scripts/selinux/install_policy.sh create mode 100644 scripts/selinux/mdp/Makefile create mode 100644 scripts/selinux/mdp/dbus_contexts create mode 100644 scripts/selinux/mdp/mdp.c (limited to 'Documentation') diff --git a/Documentation/SELinux.txt b/Documentation/SELinux.txt new file mode 100644 index 00000000000..07eae00f331 --- /dev/null +++ b/Documentation/SELinux.txt @@ -0,0 +1,27 @@ +If you want to use SELinux, chances are you will want +to use the distro-provided policies, or install the +latest reference policy release from + http://oss.tresys.com/projects/refpolicy + +However, if you want to install a dummy policy for +testing, you can do using 'mdp' provided under +scripts/selinux. Note that this requires the selinux +userspace to be installed - in particular you will +need checkpolicy to compile a kernel, and setfiles and +fixfiles to label the filesystem. + + 1. Compile the kernel with selinux enabled. + 2. Type 'make' to compile mdp. + 3. Make sure that you are not running with + SELinux enabled and a real policy. If + you are, reboot with selinux disabled + before continuing. + 4. Run install_policy.sh: + cd scripts/selinux + sh install_policy.sh + +Step 4 will create a new dummy policy valid for your +kernel, with a single selinux user, role, and type. +It will compile the policy, will set your SELINUXTYPE to +dummy in /etc/selinux/config, install the compiled policy +as 'dummy', and relabel your filesystem. diff --git a/scripts/Makefile b/scripts/Makefile index 1c73c5aea66..aafdf064fee 100644 --- a/scripts/Makefile +++ b/scripts/Makefile @@ -20,6 +20,7 @@ hostprogs-y += unifdef subdir-$(CONFIG_MODVERSIONS) += genksyms subdir-y += mod +subdir-$(CONFIG_SECURITY_SELINUX) += selinux # Let clean descend into subdirs -subdir- += basic kconfig package +subdir- += basic kconfig package selinux diff --git a/scripts/selinux/Makefile b/scripts/selinux/Makefile new file mode 100644 index 00000000000..ca4b1ec0182 --- /dev/null +++ b/scripts/selinux/Makefile @@ -0,0 +1,2 @@ +subdir-y := mdp +subdir- += mdp diff --git a/scripts/selinux/README b/scripts/selinux/README new file mode 100644 index 00000000000..a936315ba2c --- /dev/null +++ b/scripts/selinux/README @@ -0,0 +1,2 @@ +Please see Documentation/SELinux.txt for information on +installing a dummy SELinux policy. diff --git a/scripts/selinux/install_policy.sh b/scripts/selinux/install_policy.sh new file mode 100644 index 00000000000..7b9ccf61f8f --- /dev/null +++ b/scripts/selinux/install_policy.sh @@ -0,0 +1,69 @@ +#!/bin/sh +if [ `id -u` -ne 0 ]; then + echo "$0: must be root to install the selinux policy" + exit 1 +fi +SF=`which setfiles` +if [ $? -eq 1 ]; then + if [ -f /sbin/setfiles ]; then + SF="/usr/setfiles" + else + echo "no selinux tools installed: setfiles" + exit 1 + fi +fi + +cd mdp + +CP=`which checkpolicy` +VERS=`$CP -V | awk '{print $1}'` + +./mdp policy.conf file_contexts +$CP -o policy.$VERS policy.conf + +mkdir -p /etc/selinux/dummy/policy +mkdir -p /etc/selinux/dummy/contexts/files + +cp file_contexts /etc/selinux/dummy/contexts/files +cp dbus_contexts /etc/selinux/dummy/contexts +cp policy.$VERS /etc/selinux/dummy/policy +FC_FILE=/etc/selinux/dummy/contexts/files/file_contexts + +if [ ! -d /etc/selinux ]; then + mkdir -p /etc/selinux +fi +if [ ! -f /etc/selinux/config ]; then + cat > /etc/selinux/config << EOF +SELINUX=enforcing +SELINUXTYPE=dummy +EOF +else + TYPE=`cat /etc/selinux/config | grep "^SELINUXTYPE" | tail -1 | awk -F= '{ print $2 '}` + if [ "eq$TYPE" != "eqdummy" ]; then + selinuxenabled + if [ $? -eq 0 ]; then + echo "SELinux already enabled with a non-dummy policy." + echo "Exiting. Please install policy by hand if that" + echo "is what you REALLY want." + exit 1 + fi + mv /etc/selinux/config /etc/selinux/config.mdpbak + grep -v "^SELINUXTYPE" /etc/selinux/config.mdpbak >> /etc/selinux/config + echo "SELINUXTYPE=dummy" >> /etc/selinux/config + fi +fi + +cd /etc/selinux/dummy/contexts/files +$SF file_contexts / + +mounts=`cat /proc/$$/mounts | egrep "ext2|ext3|xfs|jfs|ext4|ext4dev|gfs2" | awk '{ print $2 '}` +$SF file_contexts $mounts + + +dodev=`cat /proc/$$/mounts | grep "/dev "` +if [ "eq$dodev" != "eq" ]; then + mount --move /dev /mnt + $SF file_contexts /dev + mount --move /mnt /dev +fi + diff --git a/scripts/selinux/mdp/Makefile b/scripts/selinux/mdp/Makefile new file mode 100644 index 00000000000..eb365b33344 --- /dev/null +++ b/scripts/selinux/mdp/Makefile @@ -0,0 +1,5 @@ +hostprogs-y := mdp +HOST_EXTRACFLAGS += -Isecurity/selinux/include + +always := $(hostprogs-y) +clean-files := $(hostprogs-y) policy.* file_contexts diff --git a/scripts/selinux/mdp/dbus_contexts b/scripts/selinux/mdp/dbus_contexts new file mode 100644 index 00000000000..116e684f9fc --- /dev/null +++ b/scripts/selinux/mdp/dbus_contexts @@ -0,0 +1,6 @@ + + + + + diff --git a/scripts/selinux/mdp/mdp.c b/scripts/selinux/mdp/mdp.c new file mode 100644 index 00000000000..ca757d48618 --- /dev/null +++ b/scripts/selinux/mdp/mdp.c @@ -0,0 +1,242 @@ +/* + * + * mdp - make dummy policy + * + * When pointed at a kernel tree, builds a dummy policy for that kernel + * with exactly one type with full rights to itself. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2006 + * + * Authors: Serge E. Hallyn + */ + +#include +#include +#include +#include + +#include "flask.h" + +void usage(char *name) +{ + printf("usage: %s [-m] policy_file context_file\n", name); + exit(1); +} + +void find_common_name(char *cname, char *dest, int len) +{ + char *start, *end; + + start = strchr(cname, '_')+1; + end = strchr(start, '_'); + if (!start || !end || start-cname > len || end-start > len) { + printf("Error with commons defines\n"); + exit(1); + } + strncpy(dest, start, end-start); + dest[end-start] = '\0'; +} + +#define S_(x) x, +static char *classlist[] = { +#include "class_to_string.h" + NULL +}; +#undef S_ + +#include "initial_sid_to_string.h" + +#define TB_(x) char *x[] = { +#define TE_(x) NULL }; +#define S_(x) x, +#include "common_perm_to_string.h" +#undef TB_ +#undef TE_ +#undef S_ + +struct common { + char *cname; + char **perms; +}; +struct common common[] = { +#define TB_(x) { #x, x }, +#define S_(x) +#define TE_(x) +#include "common_perm_to_string.h" +#undef TB_ +#undef TE_ +#undef S_ +}; + +#define S_(x, y, z) {x, #y}, +struct av_inherit { + int class; + char *common; +}; +struct av_inherit av_inherit[] = { +#include "av_inherit.h" +}; +#undef S_ + +#include "av_permissions.h" +#define S_(x, y, z) {x, y, z}, +struct av_perms { + int class; + int perm_i; + char *perm_s; +}; +struct av_perms av_perms[] = { +#include "av_perm_to_string.h" +}; +#undef S_ + +int main(int argc, char *argv[]) +{ + int i, j, mls = 0; + char **arg, *polout, *ctxout; + int classlist_len, initial_sid_to_string_len; + FILE *fout; + + if (argc < 3) + usage(argv[0]); + arg = argv+1; + if (argc==4 && strcmp(argv[1], "-m") == 0) { + mls = 1; + arg++; + } + polout = *arg++; + ctxout = *arg; + + fout = fopen(polout, "w"); + if (!fout) { + printf("Could not open %s for writing\n", polout); + usage(argv[0]); + } + + classlist_len = sizeof(classlist) / sizeof(char *); + /* print out the classes */ + for (i=1; i < classlist_len; i++) { + if(classlist[i]) + fprintf(fout, "class %s\n", classlist[i]); + else + fprintf(fout, "class user%d\n", i); + } + fprintf(fout, "\n"); + + initial_sid_to_string_len = sizeof(initial_sid_to_string) / sizeof (char *); + /* print out the sids */ + for (i=1; i < initial_sid_to_string_len; i++) + fprintf(fout, "sid %s\n", initial_sid_to_string[i]); + fprintf(fout, "\n"); + + /* print out the commons */ + for (i=0; i< sizeof(common)/sizeof(struct common); i++) { + char cname[101]; + find_common_name(common[i].cname, cname, 100); + cname[100] = '\0'; + fprintf(fout, "common %s\n{\n", cname); + for (j=0; common[i].perms[j]; j++) + fprintf(fout, "\t%s\n", common[i].perms[j]); + fprintf(fout, "}\n\n"); + } + fprintf(fout, "\n"); + + /* print out the class permissions */ + for (i=1; i < classlist_len; i++) { + if (classlist[i]) { + int firstperm = -1, numperms = 0; + + fprintf(fout, "class %s\n", classlist[i]); + /* does it inherit from a common? */ + for (j=0; j < sizeof(av_inherit)/sizeof(struct av_inherit); j++) + if (av_inherit[j].class == i) + fprintf(fout, "inherits %s\n", av_inherit[j].common); + + for (j=0; j < sizeof(av_perms)/sizeof(struct av_perms); j++) { + if (av_perms[j].class == i) { + if (firstperm == -1) + firstperm = j; + numperms++; + } + } + if (!numperms) { + fprintf(fout, "\n"); + continue; + } + + fprintf(fout, "{\n"); + /* print out the av_perms */ + for (j=0; j < numperms; j++) { + fprintf(fout, "\t%s\n", av_perms[firstperm+j].perm_s); + } + fprintf(fout, "}\n\n"); + } + } + fprintf(fout, "\n"); + + /* NOW PRINT OUT MLS STUFF */ + if (mls) { + printf("MLS not yet implemented\n"); + exit(1); + } + + /* types, roles, and allows */ + fprintf(fout, "type base_t;\n"); + fprintf(fout, "role base_r types { base_t };\n"); + for (i=1; i < classlist_len; i++) { + if (classlist[i]) + fprintf(fout, "allow base_t base_t:%s *;\n", classlist[i]); + else + fprintf(fout, "allow base_t base_t:user%d *;\n", i); + } + fprintf(fout, "user user_u roles { base_r };\n"); + fprintf(fout, "\n"); + + /* default sids */ + for (i=1; i < initial_sid_to_string_len; i++) + fprintf(fout, "sid %s user_u:base_r:base_t\n", initial_sid_to_string[i]); + fprintf(fout, "\n"); + + + fprintf(fout, "fs_use_xattr ext2 user_u:base_r:base_t;\n"); + fprintf(fout, "fs_use_xattr ext3 user_u:base_r:base_t;\n"); + fprintf(fout, "fs_use_xattr jfs user_u:base_r:base_t;\n"); + fprintf(fout, "fs_use_xattr xfs user_u:base_r:base_t;\n"); + fprintf(fout, "fs_use_xattr reiserfs user_u:base_r:base_t;\n"); + + fprintf(fout, "fs_use_task pipefs user_u:base_r:base_t;\n"); + fprintf(fout, "fs_use_task sockfs user_u:base_r:base_t;\n"); + + fprintf(fout, "fs_use_trans devpts user_u:base_r:base_t;\n"); + fprintf(fout, "fs_use_trans tmpfs user_u:base_r:base_t;\n"); + fprintf(fout, "fs_use_trans shm user_u:base_r:base_t;\n"); + + fprintf(fout, "genfscon proc / user_u:base_r:base_t\n"); + + fclose(fout); + + fout = fopen(ctxout, "w"); + if (!fout) { + printf("Wrote policy, but cannot open %s for writing\n", ctxout); + usage(argv[0]); + } + fprintf(fout, "/ user_u:base_r:base_t\n"); + fprintf(fout, "/.* user_u:base_r:base_t\n"); + fclose(fout); + + return 0; +} -- cgit v1.2.3-70-g09d2 From 1befdefcf476d5eb2fb4243fdf4d996a376708b1 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 28 Aug 2008 11:00:07 -0300 Subject: x86: remove 8254 timer texts from Documentation Commit ecd29476ae0143b1c3641edfa76c0fc3e9ad3021 removed the "disable_8254_timer" and "enable_8254_timer" kernel parameters from the kernel but did not remove the references to them from two files in the Documentation directory: kernel-parameters.txt and x86/x86_64/boot-options.txt. This change completes the removal. Signed-off-by: Luiz Fernando N. Capitulino Acked-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 6 ------ Documentation/x86/x86_64/boot-options.txt | 4 ---- 2 files changed, 10 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a8976467a98..53b0a8f5b23 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -463,12 +463,6 @@ and is between 256 and 4096 characters. It is defined in the file Range: 0 - 8192 Default: 64 - disable_8254_timer - enable_8254_timer - [IA32/X86_64] Disable/Enable interrupt 0 timer routing - over the 8254 in addition to over the IO-APIC. The - kernel tries to set a sensible default. - hpet= [X86-32,HPET] option to control HPET usage Format: { enable (default) | disable | force } disable: disable HPET and use PIT instead diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index b0c7b6c4abd..72ffb5373ec 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -54,10 +54,6 @@ APICs apicmaintimer. Useful when your PIT timer is totally broken. - disable_8254_timer / enable_8254_timer - Enable interrupt 0 timer routing over the 8254 in addition to over - the IO-APIC. The kernel tries to set a sensible default. - Early Console syntax: earlyprintk=vga -- cgit v1.2.3-70-g09d2 From 9662e0802445a1f56cef11bbd0d520b07238424a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 27 Aug 2008 21:04:49 -0700 Subject: ACPI: thinkpad-acpi: wan radio control is not experimental The WWAN radio control has been working well for over three years, and is no longer experimental. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Andi Kleen --- Documentation/laptops/thinkpad-acpi.txt | 11 +++-------- drivers/misc/thinkpad_acpi.c | 1 - 2 files changed, 3 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 02dc748b76c..71f0fe1fc1b 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -44,7 +44,7 @@ detailed description): - LCD brightness control - Volume control - Fan control and monitoring: fan speed, fan enable/disable - - Experimental: WAN enable and disable + - WAN enable and disable A compatibility table by model and feature is maintained on the web site, http://ibm-acpi.sf.net/. I appreciate any success or failure @@ -1375,18 +1375,13 @@ with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255 would be the safest choice, though). -EXPERIMENTAL: WAN ------------------ +WAN +--- procfs: /proc/acpi/ibm/wan sysfs device attribute: wwan_enable (deprecated) sysfs rfkill class: switch "tpacpi_wwan_sw" -This feature is marked EXPERIMENTAL because the implementation -directly accesses hardware registers and may not work as expected. USE -WITH CAUTION! To use this feature, you need to supply the -experimental=1 parameter when loading the module. - This feature shows the presence and current state of a W-WAN (Sierra Wireless EV-DO) device. diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index d3eb7903c34..6b9300779a4 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -3086,7 +3086,6 @@ static struct ibm_struct wan_driver_data = { .read = wan_read, .write = wan_write, .exit = wan_exit, - .flags.experimental = 1, }; /************************************************************************* -- cgit v1.2.3-70-g09d2 From 2922c9aff22ea65f33a891af894331f0f883d127 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 Aug 2008 18:12:42 +0200 Subject: ALSA: hda - Add descriptions of missing model values Added the descriptions of missing model values. Also, fixed the model strings of a few new models to a standard style. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- Documentation/sound/alsa/ALSA-Configuration.txt | 16 ++++++++++++++++ sound/pci/hda/patch_realtek.c | 7 +++++-- 2 files changed, 21 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 02a7194a10c..374cfc02b2f 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -809,6 +809,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC260 hp HP machines hp-3013 HP machines (3013-variant) + hp-dc7600 HP DC7600 fujitsu Fujitsu S7020 acer Acer TravelMate will Will laptops (PB V7900) @@ -830,8 +831,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. hippo Hippo (ATI) with jack detection, Sony UX-90s hippo_1 Hippo (Benq) with jack detection sony-assamd Sony ASSAMD + toshiba-s06 Toshiba S06 ultra Samsung Q1 Ultra Vista model lenovo-3000 Lenovo 3000 y410 + nec NEC Versa S9100 basic fixed pin assignment w/o SPDIF auto auto-config reading BIOS (default) @@ -840,6 +843,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack 3-stack model toshiba Toshiba A205 acer Acer laptops + acer-aspire Acer Aspire One dell Dell OEM laptops (Vostro 1200) zepto Zepto laptops test for testing/debugging purpose, almost all controls can @@ -849,6 +853,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC269 basic Basic preset + quanta Quanta FL1 + eeepc-p703 ASUS Eeepc P703 P900A + eeepc-p901 ASUS Eeepc P901 S101 ALC662/663 3stack-dig 3-stack (2-channel) with SPDIF @@ -858,10 +865,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. lenovo-101e Lenovo laptop eeepc-p701 ASUS Eeepc P701 eeepc-ep20 ASUS Eeepc EP20 + ecs ECS/Foxconn mobo m51va ASUS M51VA g71v ASUS G71V h13 ASUS H13 g50v ASUS G50V + asus-mode1 ASUS + asus-mode2 ASUS + asus-mode3 ASUS + asus-mode4 ASUS + asus-mode5 ASUS + asus-mode6 ASUS auto auto-config reading BIOS (default) ALC882/885 @@ -893,12 +907,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. lenovo-101e Lenovo 101E lenovo-nb0763 Lenovo NB0763 lenovo-ms7195-dig Lenovo MS7195 + lenovo-sky Lenovo Sky haier-w66 Haier W66 3stack-hp HP machines with 3stack (Lucknow, Samba boards) 6stack-dell Dell machines with 6stack (Inspiron 530) mitac Mitac 8252D clevo-m720 Clevo M720 laptop series fujitsu-pi2515 Fujitsu AMILO Pi2515 + 3stack-6ch-intel Intel DG33* boards auto auto-config reading BIOS (default) ALC861/660 diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a5047322174..d1f5a766c3b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5239,6 +5239,7 @@ static const char *alc260_models[ALC260_MODEL_LAST] = { [ALC260_BASIC] = "basic", [ALC260_HP] = "hp", [ALC260_HP_3013] = "hp-3013", + [ALC260_HP_DC7600] = "hp-dc7600", [ALC260_FUJITSU_S702X] = "fujitsu", [ALC260_ACER] = "acer", [ALC260_WILL] = "will", @@ -10261,6 +10262,7 @@ static const char *alc262_models[ALC262_MODEL_LAST] = { [ALC262_BENQ_ED8] = "benq", [ALC262_BENQ_T31] = "benq-t31", [ALC262_SONY_ASSAMD] = "sony-assamd", + [ALC262_TOSHIBA_S06] = "toshiba-s06", [ALC262_ULTRA] = "ultra", [ALC262_LENOVO_3000] = "lenovo-3000", [ALC262_NEC] = "nec", @@ -12151,8 +12153,9 @@ static void alc269_auto_init(struct hda_codec *codec) */ static const char *alc269_models[ALC269_MODEL_LAST] = { [ALC269_BASIC] = "basic", - [ALC269_QUANTA_FL1] = "Quanta", - [ALC269_ASUS_EEEPC_P901] = "Asus_Epc_Dmic" + [ALC269_QUANTA_FL1] = "quanta", + [ALC269_ASUS_EEEPC_P703] = "eeepc-p703", + [ALC269_ASUS_EEEPC_P901] = "eeepc-p901" }; static struct snd_pci_quirk alc269_cfg_tbl[] = { -- cgit v1.2.3-70-g09d2 From 9f99a6386eb1ad1197a401495669315de2f19039 Mon Sep 17 00:00:00 2001 From: Hiroshi Miura Date: Thu, 28 Aug 2008 16:09:06 +0200 Subject: ALSA: hda - Add support of Toshiba RX1 Added the support of Toshiba RX1 laptop with ALC262 codec chip. Related ALSA bug#3386: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3386 Signed-off-by: Hiroshi Miura Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_realtek.c | 53 ++++++++++++++++++++++++- 2 files changed, 53 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 374cfc02b2f..fd3de679386 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -832,6 +832,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. hippo_1 Hippo (Benq) with jack detection sony-assamd Sony ASSAMD toshiba-s06 Toshiba S06 + toshiba-rx1 Toshiba RX1 ultra Samsung Q1 Ultra Vista model lenovo-3000 Lenovo 3000 y410 nec NEC Versa S9100 diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d1f5a766c3b..4cfea551cab 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -103,6 +103,7 @@ enum { ALC262_LENOVO_3000, ALC262_NEC, ALC262_TOSHIBA_S06, + ALC262_TOSHIBA_RX1, ALC262_AUTO, ALC262_MODEL_LAST /* last tag */ }; @@ -9712,6 +9713,25 @@ static struct snd_kcontrol_new alc262_lenovo_3000_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc262_toshiba_rx1_mixer[] = { + HDA_BIND_VOL("Master Playback Volume", &alc262_fujitsu_bind_master_vol), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Switch", + .info = snd_hda_mixer_amp_switch_info, + .get = snd_hda_mixer_amp_switch_get, + .put = alc262_sony_master_sw_put, + .private_value = HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT), + }, + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), + { } /* end */ +}; + /* additional init verbs for Benq laptops */ static struct hda_verb alc262_EAPD_verbs[] = { {0x20, AC_VERB_SET_COEF_INDEX, 0x07}, @@ -10176,6 +10196,24 @@ static struct hda_verb alc262_HP_BPC_WildWest_init_verbs[] = { { } }; +static struct hda_verb alc262_toshiba_rx1_unsol_verbs[] = { + + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* Front Speaker */ + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + {0x14, AC_VERB_SET_CONNECT_SEL, 0x01}, + + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* MIC jack */ + {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* Front MIC */ + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) }, + {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) }, + + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* HP jack */ + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {} +}; + + #ifdef CONFIG_SND_HDA_POWER_SAVE #define alc262_loopbacks alc880_loopbacks #endif @@ -10263,6 +10301,7 @@ static const char *alc262_models[ALC262_MODEL_LAST] = { [ALC262_BENQ_T31] = "benq-t31", [ALC262_SONY_ASSAMD] = "sony-assamd", [ALC262_TOSHIBA_S06] = "toshiba-s06", + [ALC262_TOSHIBA_RX1] = "toshiba-rx1", [ALC262_ULTRA] = "ultra", [ALC262_LENOVO_3000] = "lenovo-3000", [ALC262_NEC] = "nec", @@ -10300,7 +10339,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x900e, "Sony ASSAMD", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x104d, 0x9015, "Sony 0x9015", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1", - ALC262_SONY_ASSAMD), + ALC262_TOSHIBA_RX1), SND_PCI_QUIRK(0x1179, 0x0268, "Toshiba S06", ALC262_TOSHIBA_S06), SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu", ALC262_FUJITSU), SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FUJITSU), @@ -10508,6 +10547,18 @@ static struct alc_config_preset alc262_presets[] = { .unsol_event = alc262_toshiba_s06_unsol_event, .init_hook = alc262_toshiba_s06_init_hook, }, + [ALC262_TOSHIBA_RX1] = { + .mixers = { alc262_toshiba_rx1_mixer }, + .init_verbs = { alc262_init_verbs, alc262_toshiba_rx1_unsol_verbs }, + .num_dacs = ARRAY_SIZE(alc262_dac_nids), + .dac_nids = alc262_dac_nids, + .hp_nid = 0x03, + .num_channel_mode = ARRAY_SIZE(alc262_modes), + .channel_mode = alc262_modes, + .input_mux = &alc262_capture_source, + .unsol_event = alc262_hippo_unsol_event, + .init_hook = alc262_hippo_automute, + }, }; static int patch_alc262(struct hda_codec *codec) -- cgit v1.2.3-70-g09d2 From 759ee81be6d87c150ea2b300c221b4fec8b5f646 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 27 Aug 2008 00:33:26 -0700 Subject: alsa: Remove special SBUS dma support code. No longer used. Signed-off-by: David S. Miller --- .../sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 3 +- include/sound/core.h | 3 -- include/sound/memalloc.h | 2 - sound/core/memalloc.c | 50 +--------------------- 4 files changed, 2 insertions(+), 56 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index e13c4e67029..56723b42813 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -5073,8 +5073,7 @@ struct _snd_pcm_runtime { with SNDRV_DMA_TYPE_CONTINUOUS type and the snd_dma_continuous_data(GFP_KERNEL) device pointer, where GFP_KERNEL is the kernel allocation flag to - use. For the SBUS, SNDRV_DMA_TYPE_SBUS and - snd_dma_sbus_data(sbus_dev) are used instead. + use. For the PCI scatter-gather buffers, use SNDRV_DMA_TYPE_DEV_SG with snd_dma_pci_data(pci) diff --git a/include/sound/core.h b/include/sound/core.h index 558b96284bd..821d5a59d28 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -42,9 +42,6 @@ #ifdef CONFIG_PCI struct pci_dev; #endif -#ifdef CONFIG_SBUS -struct sbus_dev; -#endif /* device allocation stuff */ diff --git a/include/sound/memalloc.h b/include/sound/memalloc.h index ae2921d9ddc..6a3e7558a7e 100644 --- a/include/sound/memalloc.h +++ b/include/sound/memalloc.h @@ -37,7 +37,6 @@ struct snd_dma_device { #ifndef snd_dma_pci_data #define snd_dma_pci_data(pci) (&(pci)->dev) #define snd_dma_isa_data() NULL -#define snd_dma_sbus_data(sbus) ((struct device *)(sbus)) #define snd_dma_continuous_data(x) ((struct device *)(unsigned long)(x)) #endif @@ -49,7 +48,6 @@ struct snd_dma_device { #define SNDRV_DMA_TYPE_CONTINUOUS 1 /* continuous no-DMA memory */ #define SNDRV_DMA_TYPE_DEV 2 /* generic device continuous */ #define SNDRV_DMA_TYPE_DEV_SG 3 /* generic device SG-buffer */ -#define SNDRV_DMA_TYPE_SBUS 4 /* SBUS continuous */ /* * info for buffer allocation diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c index ccaaac45faf..3733351a27f 100644 --- a/sound/core/memalloc.c +++ b/sound/core/memalloc.c @@ -33,9 +33,6 @@ #include #include #include -#ifdef CONFIG_SBUS -#include -#endif MODULE_AUTHOR("Takashi Iwai , Jaroslav Kysela "); @@ -180,41 +177,6 @@ static void snd_free_dev_pages(struct device *dev, size_t size, void *ptr, } #endif /* CONFIG_HAS_DMA */ -#ifdef CONFIG_SBUS - -static void *snd_malloc_sbus_pages(struct device *dev, size_t size, - dma_addr_t *dma_addr) -{ - struct sbus_dev *sdev = (struct sbus_dev *)dev; - int pg; - void *res; - - snd_assert(size > 0, return NULL); - snd_assert(dma_addr != NULL, return NULL); - pg = get_order(size); - res = dma_alloc_coherent(&sdev->ofdev.dev, PAGE_SIZE * (1 << pg), - dma_addr, GFP_ATOMIC); - if (res != NULL) - inc_snd_pages(pg); - return res; -} - -static void snd_free_sbus_pages(struct device *dev, size_t size, - void *ptr, dma_addr_t dma_addr) -{ - struct sbus_dev *sdev = (struct sbus_dev *)dev; - int pg; - - if (ptr == NULL) - return; - pg = get_order(size); - dec_snd_pages(pg); - dma_free_coherent(&sdev->ofdev.dev, PAGE_SIZE * (1 << pg), - ptr, dma_addr); -} - -#endif /* CONFIG_SBUS */ - /* * * ALSA generic memory management @@ -249,11 +211,6 @@ int snd_dma_alloc_pages(int type, struct device *device, size_t size, dmab->area = snd_malloc_pages(size, (unsigned long)device); dmab->addr = 0; break; -#ifdef CONFIG_SBUS - case SNDRV_DMA_TYPE_SBUS: - dmab->area = snd_malloc_sbus_pages(device, size, &dmab->addr); - break; -#endif #ifdef CONFIG_HAS_DMA case SNDRV_DMA_TYPE_DEV: dmab->area = snd_malloc_dev_pages(device, size, &dmab->addr); @@ -322,11 +279,6 @@ void snd_dma_free_pages(struct snd_dma_buffer *dmab) case SNDRV_DMA_TYPE_CONTINUOUS: snd_free_pages(dmab->area, dmab->bytes); break; -#ifdef CONFIG_SBUS - case SNDRV_DMA_TYPE_SBUS: - snd_free_sbus_pages(dmab->dev.dev, dmab->bytes, dmab->area, dmab->addr); - break; -#endif #ifdef CONFIG_HAS_DMA case SNDRV_DMA_TYPE_DEV: snd_free_dev_pages(dmab->dev.dev, dmab->bytes, dmab->area, dmab->addr); @@ -433,7 +385,7 @@ static int snd_mem_proc_read(struct seq_file *seq, void *offset) long pages = snd_allocated_pages >> (PAGE_SHIFT-12); struct snd_mem_list *mem; int devno; - static char *types[] = { "UNKNOWN", "CONT", "DEV", "DEV-SG", "SBUS" }; + static char *types[] = { "UNKNOWN", "CONT", "DEV", "DEV-SG" }; mutex_lock(&list_mutex); seq_printf(seq, "pages : %li bytes (%li pages per %likB)\n", -- cgit v1.2.3-70-g09d2 From 0c0db98b50ed1217c0dbf4051722034ba314d06e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 27 Aug 2008 19:59:48 -0700 Subject: sparc: Remove Documentation/sparc/sbus_drivers.txt None of the text in this document is relevant any more. Signed-off-by: David S. Miller --- Documentation/sparc/sbus_drivers.txt | 309 ----------------------------------- 1 file changed, 309 deletions(-) delete mode 100644 Documentation/sparc/sbus_drivers.txt (limited to 'Documentation') diff --git a/Documentation/sparc/sbus_drivers.txt b/Documentation/sparc/sbus_drivers.txt deleted file mode 100644 index eb1e28ad882..00000000000 --- a/Documentation/sparc/sbus_drivers.txt +++ /dev/null @@ -1,309 +0,0 @@ - - Writing SBUS Drivers - - David S. Miller (davem@redhat.com) - - The SBUS driver interfaces of the Linux kernel have been -revamped completely for 2.4.x for several reasons. Foremost were -performance and complexity concerns. This document details these -new interfaces and how they are used to write an SBUS device driver. - - SBUS drivers need to include to get access -to functions and structures described here. - - Probing and Detection - - Each SBUS device inside the machine is described by a -structure called "struct sbus_dev". Likewise, each SBUS bus -found in the system is described by a "struct sbus_bus". For -each SBUS bus, the devices underneath are hung in a tree-like -fashion off of the bus structure. - - The SBUS device structure contains enough information -for you to implement your device probing algorithm and obtain -the bits necessary to run your device. The most commonly -used members of this structure, and their typical usage, -will be detailed below. - - Here is a piece of skeleton code for performing a device -probe in an SBUS driver under Linux: - - static int __devinit mydevice_probe_one(struct sbus_dev *sdev) - { - struct mysdevice *mp = kzalloc(sizeof(*mp), GFP_KERNEL); - - if (!mp) - return -ENODEV; - - ... - dev_set_drvdata(&sdev->ofdev.dev, mp); - return 0; - ... - } - - static int __devinit mydevice_probe(struct of_device *dev, - const struct of_device_id *match) - { - struct sbus_dev *sdev = to_sbus_device(&dev->dev); - - return mydevice_probe_one(sdev); - } - - static int __devexit mydevice_remove(struct of_device *dev) - { - struct sbus_dev *sdev = to_sbus_device(&dev->dev); - struct mydevice *mp = dev_get_drvdata(&dev->dev); - - return mydevice_remove_one(sdev, mp); - } - - static struct of_device_id mydevice_match[] = { - { - .name = "mydevice", - }, - {}, - }; - - MODULE_DEVICE_TABLE(of, mydevice_match); - - static struct of_platform_driver mydevice_driver = { - .match_table = mydevice_match, - .probe = mydevice_probe, - .remove = __devexit_p(mydevice_remove), - .driver = { - .name = "mydevice", - }, - }; - - static int __init mydevice_init(void) - { - return of_register_driver(&mydevice_driver, &sbus_bus_type); - } - - static void __exit mydevice_exit(void) - { - of_unregister_driver(&mydevice_driver); - } - - module_init(mydevice_init); - module_exit(mydevice_exit); - - The mydevice_match table is a series of entries which -describes what SBUS devices your driver is meant for. In the -simplest case you specify a string for the 'name' field. Every -SBUS device with a 'name' property matching your string will -be passed one-by-one to your .probe method. - - You should store away your device private state structure -pointer in the drvdata area so that you can retrieve it later on -in your .remove method. - - Any memory allocated, registers mapped, IRQs registered, -etc. must be undone by your .remove method so that all resources -of your device are released by the time it returns. - - You should _NOT_ use the for_each_sbus(), for_each_sbusdev(), -and for_all_sbusdev() interfaces. They are deprecated, will be -removed, and no new driver should reference them ever. - - Mapping and Accessing I/O Registers - - Each SBUS device structure contains an array of descriptors -which describe each register set. We abuse struct resource for that. -They each correspond to the "reg" properties provided by the OBP firmware. - - Before you can access your device's registers you must map -them. And later if you wish to shutdown your driver (for module -unload or similar) you must unmap them. You must treat them as -a resource, which you allocate (map) before using and free up -(unmap) when you are done with it. - - The mapping information is stored in an opaque value -typed as an "unsigned long". This is the type of the return value -of the mapping interface, and the arguments to the unmapping -interface. Let's say you want to map the first set of registers. -Perhaps part of your driver software state structure looks like: - - struct mydevice { - unsigned long control_regs; - ... - struct sbus_dev *sdev; - ... - }; - - At initialization time you then use the sbus_ioremap -interface to map in your registers, like so: - - static void init_one_mydevice(struct sbus_dev *sdev) - { - struct mydevice *mp; - ... - - mp->control_regs = sbus_ioremap(&sdev->resource[0], 0, - CONTROL_REGS_SIZE, "mydevice regs"); - if (!mp->control_regs) { - /* Failure, cleanup and return. */ - } - } - - Second argument to sbus_ioremap is an offset for -cranky devices with broken OBP PROM. The sbus_ioremap uses only -a start address and flags from the resource structure. -Therefore it is possible to use the same resource to map -several sets of registers or even to fabricate a resource -structure if driver gets physical address from some private place. -This practice is discouraged though. Use whatever OBP PROM -provided to you. - - And here is how you might unmap these registers later at -driver shutdown or module unload time, using the sbus_iounmap -interface: - - static void mydevice_unmap_regs(struct mydevice *mp) - { - sbus_iounmap(mp->control_regs, CONTROL_REGS_SIZE); - } - - Finally, to actually access your registers there are 6 -interface routines at your disposal. Accesses are byte (8 bit), -word (16 bit), or longword (32 bit) sized. Here they are: - - u8 sbus_readb(unsigned long reg) /* read byte */ - u16 sbus_readw(unsigned long reg) /* read word */ - u32 sbus_readl(unsigned long reg) /* read longword */ - void sbus_writeb(u8 value, unsigned long reg) /* write byte */ - void sbus_writew(u16 value, unsigned long reg) /* write word */ - void sbus_writel(u32 value, unsigned long reg) /* write longword */ - - So, let's say your device has a control register of some sort -at offset zero. The following might implement resetting your device: - - #define CONTROL 0x00UL - - #define CONTROL_RESET 0x00000001 /* Reset hardware */ - - static void mydevice_reset(struct mydevice *mp) - { - sbus_writel(CONTROL_RESET, mp->regs + CONTROL); - } - - Or perhaps there is a data port register at an offset of -16 bytes which allows you to read bytes from a fifo in the device: - - #define DATA 0x10UL - - static u8 mydevice_get_byte(struct mydevice *mp) - { - return sbus_readb(mp->regs + DATA); - } - - It's pretty straightforward, and clueful readers may have -noticed that these interfaces mimick the PCI interfaces of the -Linux kernel. This was not by accident. - - WARNING: - - DO NOT try to treat these opaque register mapping - values as a memory mapped pointer to some structure - which you can dereference. - - It may be memory mapped, it may not be. In fact it - could be a physical address, or it could be the time - of day xor'd with 0xdeadbeef. :-) - - Whatever it is, it's an implementation detail. The - interface was done this way to shield the driver - author from such complexities. - - Doing DVMA - - SBUS devices can perform DMA transactions in a way similar -to PCI but dissimilar to ISA, e.g. DMA masters supply address. -In contrast to PCI, however, that address (a bus address) is -translated by IOMMU before a memory access is performed and therefore -it is virtual. Sun calls this procedure DVMA. - - Linux supports two styles of using SBUS DVMA: "consistent memory" -and "streaming DVMA". CPU view of consistent memory chunk is, well, -consistent with a view of a device. Think of it as an uncached memory. -Typically this way of doing DVMA is not very fast and drivers use it -mostly for control blocks or queues. On some CPUs we cannot flush or -invalidate individual pages or cache lines and doing explicit flushing -over ever little byte in every control block would be wasteful. - -Streaming DVMA is a preferred way to transfer large amounts of data. -This process works in the following way: -1. a CPU stops accessing a certain part of memory, - flushes its caches covering that memory; -2. a device does DVMA accesses, then posts an interrupt; -3. CPU invalidates its caches and starts to access the memory. - -A single streaming DVMA operation can touch several discontiguous -regions of a virtual bus address space. This is called a scatter-gather -DVMA. - -[TBD: Why do not we neither Solaris attempt to map disjoint pages -into a single virtual chunk with the help of IOMMU, so that non SG -DVMA masters would do SG? It'd be very helpful for RAID.] - - In order to perform a consistent DVMA a driver does something -like the following: - - char *mem; /* Address in the CPU space */ - u32 busa; /* Address in the SBus space */ - - mem = (char *) sbus_alloc_consistent(sdev, MYMEMSIZE, &busa); - - Then mem is used when CPU accesses this memory and u32 -is fed to the device so that it can do DVMA. This is typically -done with an sbus_writel() into some device register. - - Do not forget to free the DVMA resources once you are done: - - sbus_free_consistent(sdev, MYMEMSIZE, mem, busa); - - Streaming DVMA is more interesting. First you allocate some -memory suitable for it or pin down some user pages. Then it all works -like this: - - char *mem = argumen1; - unsigned int size = argument2; - u32 busa; /* Address in the SBus space */ - - *mem = 1; /* CPU can access */ - busa = sbus_map_single(sdev, mem, size); - if (busa == 0) ....... - - /* Tell the device to use busa here */ - /* CPU cannot access the memory without sbus_dma_sync_single() */ - - sbus_unmap_single(sdev, busa, size); - if (*mem == 0) .... /* CPU can access again */ - - It is possible to retain mappings and ask the device to -access data again and again without calling sbus_unmap_single. -However, CPU caches must be invalidated with sbus_dma_sync_single -before such access. - -[TBD but what about writeback caches here... do we have any?] - - There is an equivalent set of functions doing the same thing -only with several memory segments at once for devices capable of -scatter-gather transfers. Use the Source, Luke. - - Examples - - drivers/net/sunhme.c - This is a complicated driver which illustrates many concepts -discussed above and plus it handles both PCI and SBUS boards. - - drivers/scsi/esp.c - Check it out for scatter-gather DVMA. - - drivers/sbus/char/bpp.c - A non-DVMA device. - - drivers/net/sunlance.c - Lance driver abuses consistent mappings for data transfer. -It is a nifty trick which we do not particularly recommend... -Just check it out and know that it's legal. -- cgit v1.2.3-70-g09d2 From 7ed77e804650b9095f862a0cfeecaa955224a73e Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 1 Sep 2008 15:09:51 -0700 Subject: don't diff generated firmware files With the new firmware infrastructure in 2.6.27, some files are generated and shouldn't be diffed; add these 2 to the "dontdiff" file Signed-off-by: Arjan van de Ven Signed-off-by: Linus Torvalds --- Documentation/dontdiff | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 881e6dd03ae..27809357da5 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -5,6 +5,8 @@ *.css *.dvi *.eps +*.fw.gen.S +*.fw *.gif *.grep *.grp -- cgit v1.2.3-70-g09d2 From 169ccbd44eb20f5bb7e4352451eba25397e29749 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 2 Sep 2008 14:35:37 -0700 Subject: NTFS: update homepage Update the location of the NTFS homepage in several files. Signed-off-by: Adrian Bunk Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/ntfs.txt | 4 ++-- MAINTAINERS | 2 +- fs/ntfs/usnjrnl.h | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index e79ee2db183..ac2a261c5f7 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt @@ -40,7 +40,7 @@ Web site ======== There is plenty of additional information on the linux-ntfs web site -at http://linux-ntfs.sourceforge.net/ +at http://www.linux-ntfs.org/ The web site has a lot of additional information, such as a comprehensive FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS @@ -272,7 +272,7 @@ And you would know that /dev/hda2 has a size of 37768814 - 4209030 + 1 = For Win2k and later dynamic disks, you can for example use the ldminfo utility which is part of the Linux LDM tools (the latest version at the time of writing is linux-ldm-0.0.8.tar.bz2). You can download it from: - http://linux-ntfs.sourceforge.net/downloads.html + http://www.linux-ntfs.org/ Simply extract the downloaded archive (tar xvjf linux-ldm-0.0.8.tar.bz2), go into it (cd linux-ldm-0.0.8) and change to the test directory (cd test). You will find the precompiled (i386) ldminfo utility there. NOTE: You will not be diff --git a/MAINTAINERS b/MAINTAINERS index c4ca99cf80d..be83f3424f3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3051,7 +3051,7 @@ P: Anton Altaparmakov M: aia21@cantab.net L: linux-ntfs-dev@lists.sourceforge.net L: linux-kernel@vger.kernel.org -W: http://linux-ntfs.sf.net/ +W: http://www.linux-ntfs.org/ T: git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git S: Maintained diff --git a/fs/ntfs/usnjrnl.h b/fs/ntfs/usnjrnl.h index 3a8af75351e..4087fbdac32 100644 --- a/fs/ntfs/usnjrnl.h +++ b/fs/ntfs/usnjrnl.h @@ -113,7 +113,7 @@ typedef struct { * Reason flags (32-bit). Cumulative flags describing the change(s) to the * file since it was last opened. I think the names speak for themselves but * if you disagree check out the descriptions in the Linux NTFS project NTFS - * documentation: http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html + * documentation: http://www.linux-ntfs.org/ */ enum { USN_REASON_DATA_OVERWRITE = const_cpu_to_le32(0x00000001), @@ -145,7 +145,7 @@ typedef le32 USN_REASON_FLAGS; * Source info flags (32-bit). Information about the source of the change(s) * to the file. For detailed descriptions of what these mean, see the Linux * NTFS project NTFS documentation: - * http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html + * http://www.linux-ntfs.org/ */ enum { USN_SOURCE_DATA_MANAGEMENT = const_cpu_to_le32(0x00000001), -- cgit v1.2.3-70-g09d2 From 61e55d0576d0e7eb4fecaeb25b3618e035de5be1 Mon Sep 17 00:00:00 2001 From: Nadia Derbey Date: Tue, 2 Sep 2008 14:35:59 -0700 Subject: ipc: document the new auto_msgmni proc file Update Documentation/filesystems/proc.txt: it describes the file auto_msgmni intoduced to enable/disable msgmni automatic recomputing upon memory add/remove (see thread http://lkml.org/lkml/2008/7/4/27). Also added a description for msgmni (this filex is only listed in Documentation/sysctl/kernel.txt). Signed-off-by: Nadia Derbey Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 64557821ee5..394eb2cc1c3 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1339,6 +1339,25 @@ Enables/Disables the protection of the per-process proc entries "maps" and "smaps". When enabled, the contents of these files are visible only to readers that are allowed to ptrace() the given process. +msgmni +------ + +Maximum number of message queue ids on the system. +This value scales to the amount of lowmem. It is automatically recomputed +upon memory add/remove or ipc namespace creation/removal. +When a value is written into this file, msgmni's value becomes fixed, i.e. it +is not recomputed anymore when one of the above events occurs. +Use auto_msgmni to change this behavior. + +auto_msgmni +----------- + +Enables/Disables automatic recomputing of msgmni upon memory add/remove or +upon ipc namespace creation/removal (see the msgmni description above). +Echoing "1" into this file enables msgmni automatic recomputing. +Echoing "0" turns it off. +auto_msgmni default value is 1. + 2.4 /proc/sys/vm - The virtual memory subsystem ----------------------------------------------- -- cgit v1.2.3-70-g09d2 From 8b3a8944a9c0f2a3afc1678798b44f0442924a37 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Tue, 2 Sep 2008 14:36:09 -0700 Subject: sysfs: document files in /sys/firmware/sgi_uv/ Document files in /sys/firmware/sgi_uv/. Signed-off-by: Russ Anderson Cc: Jack Steiner Cc: Ingo Molnar Cc: Thomas Gleixner Acked-by: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-firmware-sgi_uv | 27 +++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-firmware-sgi_uv (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/Documentation/ABI/testing/sysfs-firmware-sgi_uv new file mode 100644 index 00000000000..4573fd4b787 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-sgi_uv @@ -0,0 +1,27 @@ +What: /sys/firmware/sgi_uv/ +Date: August 2008 +Contact: Russ Anderson +Description: + The /sys/firmware/sgi_uv directory contains information + about the SGI UV platform. + + Under that directory are a number of files: + + partition_id + coherence_id + + The partition_id entry contains the partition id. + SGI UV systems can be partitioned into multiple physical + machines, which each partition running a unique copy + of the operating system. Each partition will have a unique + partition id. To display the partition id, use the command: + + cat /sys/firmware/sgi_uv/partition_id + + The coherence_id entry contains the coherence id. + A partitioned SGI UV system can have one or more coherence + domain. The coherence id indicates which coherence domain + this partition is in. To display the coherence id, use the + command: + + cat /sys/firmware/sgi_uv/coherence_id -- cgit v1.2.3-70-g09d2 From 8e8bd229eef385ab420d4fa51c611d4ddc7cb0c8 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 3 Sep 2008 16:46:36 -0300 Subject: V4L/DVB (8556): au0828: add support for Hauppauge Woodbury Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.au0828 | 1 + drivers/media/video/au0828/Kconfig | 1 + drivers/media/video/au0828/au0828-cards.c | 7 +++++++ drivers/media/video/au0828/au0828-cards.h | 1 + drivers/media/video/au0828/au0828-dvb.c | 21 +++++++++++++++++++++ 5 files changed, 31 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828 index eedc399e8de..aa05e5bb22f 100644 --- a/Documentation/video4linux/CARDLIST.au0828 +++ b/Documentation/video4linux/CARDLIST.au0828 @@ -3,3 +3,4 @@ 2 -> Hauppauge HVR850 (au0828) [2040:7240] 3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620] 4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281] + 5 -> Hauppauge Woodbury (au0828) [2040:8200] diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig index ed9a50f189f..018f72b8e3e 100644 --- a/drivers/media/video/au0828/Kconfig +++ b/drivers/media/video/au0828/Kconfig @@ -7,6 +7,7 @@ config VIDEO_AU0828 select DVB_AU8522 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Auvitek's USB device. diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 443e5900976..14b9fc9bb62 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -38,6 +38,9 @@ struct au0828_board au0828_boards[] = { [AU0828_BOARD_DVICO_FUSIONHDTV7] = { .name = "DViCO FusionHDTV USB", }, + [AU0828_BOARD_HAUPPAUGE_WOODBURY] = { + .name = "Hauppauge Woodbury", + }, }; /* Tuner callback function for au0828 boards. Currently only needed @@ -115,6 +118,7 @@ void au0828_card_setup(struct au0828_dev *dev) case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: + case AU0828_BOARD_HAUPPAUGE_WOODBURY: if (dev->i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xa0); break; @@ -134,6 +138,7 @@ void au0828_gpio_setup(struct au0828_dev *dev) case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: + case AU0828_BOARD_HAUPPAUGE_WOODBURY: /* GPIO's * 4 - CS5340 * 5 - AU8522 Demodulator @@ -205,6 +210,8 @@ struct usb_device_id au0828_usb_id_table [] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, { USB_DEVICE(0x2040, 0x7281), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, + { USB_DEVICE(0x2040, 0x8200), + .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY }, { }, }; diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h index c37f5fd0fa8..102ed03dc6b 100644 --- a/drivers/media/video/au0828/au0828-cards.h +++ b/drivers/media/video/au0828/au0828-cards.h @@ -24,3 +24,4 @@ #define AU0828_BOARD_HAUPPAUGE_HVR850 2 #define AU0828_BOARD_DVICO_FUSIONHDTV7 3 #define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL 4 +#define AU0828_BOARD_HAUPPAUGE_WOODBURY 5 diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index 584a83a94a2..c862f9e4d2f 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -29,6 +29,7 @@ #include "au8522.h" #include "xc5000.h" #include "mxl5007t.h" +#include "tda18271.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -40,6 +41,13 @@ static struct au8522_config hauppauge_hvr950q_config = { .status_mode = AU8522_DEMODLOCKING, }; +static struct au8522_config hauppauge_woodbury_config = { + .demod_address = 0x8e >> 1, + .status_mode = AU8522_DEMODLOCKING, + .qam_if = AU8522_IF_4MHZ, + .vsb_if = AU8522_IF_3_25MHZ, +}; + static struct xc5000_config hauppauge_hvr950q_tunerconfig = { .i2c_address = 0x61, .if_khz = 6000, @@ -51,6 +59,10 @@ static struct mxl5007t_config mxl5007t_hvr950q_config = { .if_freq_hz = MxL_IF_6_MHZ, }; +static struct tda18271_config hauppauge_woodbury_tunerconfig = { + .gate = TDA18271_GATE_DIGITAL, +}; + /*-------------------------------------------------------------------*/ static void urb_completion(struct urb *purb) { @@ -357,6 +369,15 @@ int au0828_dvb_register(struct au0828_dev *dev) &dev->i2c_adap, 0x60, &mxl5007t_hvr950q_config); break; + case AU0828_BOARD_HAUPPAUGE_WOODBURY: + dvb->frontend = dvb_attach(au8522_attach, + &hauppauge_woodbury_config, + &dev->i2c_adap); + if (dvb->frontend != NULL) + dvb_attach(tda18271_attach, dvb->frontend, + 0x60, &dev->i2c_adap, + &hauppauge_woodbury_tunerconfig); + break; default: printk(KERN_WARNING "The frontend of your DVB/ATSC card " "isn't supported yet\n"); -- cgit v1.2.3-70-g09d2 From d2d16e9084ee44088974c3312b803d54dd9b46d7 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:23 -0300 Subject: V4L/DVB (8663): gspca: Webcam 0c45:6128 added in sonixj. Patch adapted from a patch to gspcav1 made by the google microdia group. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/sonixj.c | 128 +++++++++++++++++++++++++++++++----- 2 files changed, 112 insertions(+), 17 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 78a863ab8a5..c7fc9fa8bec 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -220,6 +220,7 @@ sonixj 0c45:60c0 Sangha Sn535 sonixj 0c45:60ec SN9C105+MO4000 sonixj 0c45:60fb Surfer NoName sonixj 0c45:60fc LG-LIC300 +sonixj 0c45:6128 Microdia/Sonix SNP325 sonixj 0c45:612a Avant Camera sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix sonixj 0c45:6130 Sonix Pccam diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 245a30ec5fb..151e1b625b0 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -54,8 +54,9 @@ struct sd { #define SENSOR_HV7131R 0 #define SENSOR_MI0360 1 #define SENSOR_MO4000 2 -#define SENSOR_OV7648 3 -#define SENSOR_OV7660 4 +#define SENSOR_OM6802 3 +#define SENSOR_OV7648 4 +#define SENSOR_OV7660 5 unsigned char i2c_base; }; @@ -180,6 +181,20 @@ static const __u8 sn_mo4000[] = { 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; +static const __u8 sn_om6802[] = { +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x00, 0x23, 0x72, 0x00, 0x1a, 0x34, 0x27, 0x20, +/* reg8 reg9 rega regb regc regd rege regf */ + 0x80, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x51, 0x01, 0x00, 0x28, 0x1e, 0x40, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x22, 0x44, 0x63, 0x7d, 0x92, 0xa3, 0xaf, + 0xbc, 0xc4, 0xcd, 0xd5, 0xdc, 0xe1, 0xe8, 0xef, + 0xf7 +}; + static const __u8 sn_ov7648[] = { /* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ 0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20, @@ -207,6 +222,7 @@ static const __u8 *sn_tb[] = { sn_hv7131, sn_mi0360, sn_mo4000, + sn_om6802, sn_ov7648, sn_ov7660 }; @@ -340,6 +356,40 @@ static const __u8 mo4000_sensor_init[][8] = { {0xa1, 0x21, 0x11, 0x38, 0x00, 0x00, 0x00, 0x10}, {} }; +static __u8 om6802_sensor_init[][8] = { + {0xa0, 0x34, 0x90, 0x05, 0x00, 0x00, 0x00, 0x10}, + {0xa0, 0x34, 0x49, 0x85, 0x00, 0x00, 0x00, 0x10}, + {0xa0, 0x34, 0x5a, 0xc0, 0x00, 0x00, 0x00, 0x10}, + {0xa0, 0x34, 0xdd, 0x18, 0x00, 0x00, 0x00, 0x10}, +/* {0xa0, 0x34, 0xfb, 0x11, 0x00, 0x00, 0x00, 0x10}, */ + {0xa0, 0x34, 0xf0, 0x04, 0x00, 0x00, 0x00, 0x10}, + /* white balance & auto-exposure */ +/* {0xa0, 0x34, 0xf1, 0x02, 0x00, 0x00, 0x00, 0x10}, + * set color mode */ +/* {0xa0, 0x34, 0xfe, 0x5b, 0x00, 0x00, 0x00, 0x10}, + * max AGC value in AE */ +/* {0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10}, + * preset AGC */ +/* {0xa0, 0x34, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x10}, + * preset brightness */ +/* {0xa0, 0x34, 0xe7, 0x00, 0x00, 0x00, 0x00, 0x10}, + * preset contrast */ +/* {0xa0, 0x34, 0xe8, 0x31, 0x00, 0x00, 0x00, 0x10}, + * preset gamma */ + {0xa0, 0x34, 0xe9, 0x0f, 0x00, 0x00, 0x00, 0x10}, + /* luminance mode (0x4f = AE) */ + {0xa0, 0x34, 0xe4, 0xff, 0x00, 0x00, 0x00, 0x10}, + /* preset shutter */ +/* {0xa0, 0x34, 0xef, 0x00, 0x00, 0x00, 0x00, 0x10}, + * auto frame rate */ +/* {0xa0, 0x34, 0xfb, 0xee, 0x00, 0x00, 0x00, 0x10}, */ + +/* {0xa0, 0x34, 0x71, 0x84, 0x00, 0x00, 0x00, 0x10}, */ +/* {0xa0, 0x34, 0x72, 0x05, 0x00, 0x00, 0x00, 0x10}, */ +/* {0xa0, 0x34, 0x68, 0x80, 0x00, 0x00, 0x00, 0x10}, */ +/* {0xa0, 0x34, 0x69, 0x01, 0x00, 0x00, 0x00, 0x10}, */ + {} +}; static const __u8 ov7660_sensor_init[][8] = { {0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */ /* (delay 20ms) */ @@ -685,8 +735,14 @@ static int configure_gpio(struct gspca_dev *gspca_dev, reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f); - switch (sd->bridge) { - case BRIDGE_SN9C325: + switch (sd->sensor) { + case SENSOR_OM6802: + reg_w1(gspca_dev, 0x02, 0x71); + reg_w1(gspca_dev, 0x01, 0x42); + reg_w1(gspca_dev, 0x17, 0x64); + reg_w1(gspca_dev, 0x01, 0x42); + break; + case SENSOR_OV7648: reg_w1(gspca_dev, 0x01, 0x43); reg_w1(gspca_dev, 0x17, 0xae); reg_w1(gspca_dev, 0x01, 0x42); @@ -695,11 +751,11 @@ static int configure_gpio(struct gspca_dev *gspca_dev, reg_w1(gspca_dev, 0x01, 0x43); reg_w1(gspca_dev, 0x17, 0x61); reg_w1(gspca_dev, 0x01, 0x42); - } - - if (sd->sensor == SENSOR_HV7131R) { - if (probesensor(gspca_dev) < 0) - return -ENODEV; + if (sd->sensor == SENSOR_HV7131R) { + if (probesensor(gspca_dev) < 0) + return -ENODEV; + } + break; } return 0; } @@ -737,6 +793,16 @@ static void mo4000_InitSensor(struct gspca_dev *gspca_dev) } } +static void om6802_InitSensor(struct gspca_dev *gspca_dev) +{ + int i = 0; + + while (om6802_sensor_init[i][0]) { + i2c_w8(gspca_dev, om6802_sensor_init[i]); + i++; + } +} + static void ov7648_InitSensor(struct gspca_dev *gspca_dev) { int i = 0; @@ -891,6 +957,20 @@ static unsigned int setexposure(struct gspca_dev *gspca_dev, | ((expoMo10[3] & 0x30) >> 4)); break; } + case SENSOR_OM6802: { + __u8 gainOm[] = + { 0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10 }; + + if (expo > 0x03ff) + expo = 0x03ff; + if (expo < 0x0001) + expo = 0x0001; + gainOm[3] = expo >> 2; + i2c_w8(gspca_dev, gainOm); + reg_w1(gspca_dev, 0x96, expo >> 5); + PDEBUG(D_CONF, "set exposure %d", gainOm[3]); + break; + } } return expo; } @@ -901,6 +981,7 @@ static void setbrightness(struct gspca_dev *gspca_dev) unsigned int expo; __u8 k2; + k2 = sd->brightness >> 10; switch (sd->sensor) { case SENSOR_HV7131R: expo = sd->brightness << 4; @@ -915,9 +996,13 @@ static void setbrightness(struct gspca_dev *gspca_dev) expo = sd->brightness >> 4; sd->exposure = setexposure(gspca_dev, expo); break; + case SENSOR_OM6802: + expo = sd->brightness >> 6; + sd->exposure = setexposure(gspca_dev, expo); + k2 = sd->brightness >> 11; + break; } - k2 = sd->brightness >> 10; reg_w1(gspca_dev, 0x96, k2); } @@ -1049,6 +1134,11 @@ static void sd_start(struct gspca_dev *gspca_dev) /* reg1 = 0x06; * 640 clk 24Mz (done) */ } break; + case SENSOR_OM6802: + om6802_InitSensor(gspca_dev); + reg1 = 0x46; /* 640 clk 24Mz */ + reg17 = 0x64; /* 640 MCKSIZE */ + break; case SENSOR_OV7648: ov7648_InitSensor(gspca_dev); reg17 = 0xa2; @@ -1174,6 +1264,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) default: /* case SENSOR_MO4000: */ /* case SENSOR_MI0360: */ +/* case SENSOR_OM6802: */ expotimes = sd->exposure; expotimes += (luma_mean - delta) >> 6; if (expotimes < 0) @@ -1246,7 +1337,8 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev) i2c_r5(gspca_dev, 0x09); return (gspca_dev->usb_buf[0] << 8) | gspca_dev->usb_buf[1]; - case SENSOR_MO4000: + default: +/* case SENSOR_MO4000: */ i2c_r5(gspca_dev, 0x0e); hexpo = 0; /* gspca_dev->usb_buf[1] & 0x07; */ mexpo = 0x40; /* gspca_dev->usb_buf[2] & 0xff; */ @@ -1254,7 +1346,8 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev) PDEBUG(D_CONF, "exposure %d", (hexpo << 10) | (mexpo << 2) | lexpo); return (hexpo << 10) | (mexpo << 2) | lexpo; - default: +#if 0 +/*jfm: not called*/ /* case SENSOR_OV7648: * jfm: is it ok for 7648? */ /* case SENSOR_OV7660: */ /* read sensor exposure */ @@ -1264,7 +1357,9 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev) i2c_r5(gspca_dev, 0x08); mexpo = gspca_dev->usb_buf[2]; return (hexpo << 10) | (mexpo << 2) | lexpo; +#endif } + /* not reached */ } static void getbrightness(struct gspca_dev *gspca_dev) @@ -1277,9 +1372,8 @@ static void getbrightness(struct gspca_dev *gspca_dev) sd->brightness = getexposure(gspca_dev) >> 4; break; case SENSOR_MI0360: - sd->brightness = getexposure(gspca_dev) << 4; - break; case SENSOR_MO4000: + case SENSOR_OM6802: sd->brightness = getexposure(gspca_dev) << 4; break; } @@ -1406,9 +1500,9 @@ static const __devinitdata struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */ /* {USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */ /* {USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */ - {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C325, OV7648, 0x21)}, -/* bw600.inf: - {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, */ + {USB_DEVICE(0x0c45, 0x6128), BSI(SN9C110, OM6802, 0x21)}, /*sn9c325?*/ +/*bw600.inf:*/ + {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, /*sn9c325?*/ {USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)}, /* {USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x??)}, */ /* {USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */ -- cgit v1.2.3-70-g09d2 From 142346bf9f2410b32cd219cf3f70a85ac56d5b85 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:48:07 -0300 Subject: V4L/DVB (8715): gspca: Change the name of some webcam in the gspca doc. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index c7fc9fa8bec..2dd2f774dd8 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -88,14 +88,14 @@ zc3xx 0471:0325 Philips SPC 200 NC zc3xx 0471:0326 Philips SPC 300 NC sonixj 0471:0327 Philips SPC 600 NC sonixj 0471:0328 Philips SPC 700 NC -zc3xx 0471:032d Philips spc210nc -zc3xx 0471:032e Philips spc315nc -sonixj 0471:0330 Philips SPC 710NC +zc3xx 0471:032d Philips SPC 210 NC +zc3xx 0471:032e Philips SPC 315 NC +sonixj 0471:0330 Philips SPC 710 NC spca501 0497:c001 Smile International sunplus 04a5:3003 Benq DC 1300 sunplus 04a5:3008 Benq DC 1500 -sunplus 04a5:300a Benq DC3410 -spca500 04a5:300c Benq DC1016 +sunplus 04a5:300a Benq DC 3410 +spca500 04a5:300c Benq DC 1016 sunplus 04f1:1001 JVC GC A50 spca561 04fc:0561 Flexcam 100 sunplus 04fc:500c Sunplus CA500C @@ -175,18 +175,18 @@ sunplus 08ca:2060 Aiptek PocketDV5300 tv8532 0923:010f ICM532 cams mars 093a:050f Mars-Semi Pc-Camera pac207 093a:2460 PAC207 Qtec Webcam 100 -pac207 093a:2463 Philips spc200nc pac207 +pac207 093a:2463 Philips SPC 220 NC pac207 093a:2464 Labtec Webcam 1200 pac207 093a:2468 PAC207 pac207 093a:2470 Genius GF112 -pac207 093a:2471 PAC207 Genius VideoCam ge111 -pac207 093a:2472 PAC207 Genius VideoCam ge110 +pac207 093a:2471 Genius VideoCam ge111 +pac207 093a:2472 Genius VideoCam ge110 pac7311 093a:2600 PAC7311 Typhoon -pac7311 093a:2601 PAC7311 Phillips SPC610NC +pac7311 093a:2601 Philips SPC 610 NC pac7311 093a:2603 PAC7312 -pac7311 093a:2608 PAC7311 Trust WB-3300p -pac7311 093a:260e PAC7311 Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 -pac7311 093a:260f PAC7311 SnakeCam +pac7311 093a:2608 Trust WB-3300p +pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 +pac7311 093a:260f SnakeCam pac7311 093a:2621 PAC731x zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 @@ -235,7 +235,7 @@ zc3xx 10fd:0128 Typhoon Webshot II USB 300k 0x0128 spca561 10fd:7e50 FlyCam Usb 100 zc3xx 10fd:8050 Typhoon Webshot II USB 300k spca501 1776:501c Arowana 300K CMOS Camera -t613 17a1:0128 T613/TAS5130A +t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC pac207 2001:f115 D-Link DSB-C120 spca500 2899:012c Toptro Industrial -- cgit v1.2.3-70-g09d2 From 8a5b2e909d56a1d5edec5e8f8848e03aafbc588e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:17 -0300 Subject: V4L/DVB (8825): gspca: More controls for pac73xx and new webcam 093a:2624. -Add usb id for 093a:2624 (pac7302) -Report some controls to userspace with 7302 only, as they are 7302 only -Add gain and exposure controls -Add autogain -Fix 7302 imaged being mirrored by default Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac207.c | 16 +- drivers/media/video/gspca/pac7311.c | 301 ++++++++++++++++++++++++--------- drivers/media/video/gspca/pac_common.h | 9 +- 4 files changed, 232 insertions(+), 95 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 2dd2f774dd8..c503467da25 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -188,6 +188,7 @@ pac7311 093a:2608 Trust WB-3300p pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 pac7311 093a:260f SnakeCam pac7311 093a:2621 PAC731x +pac7311 093a:2624 PAC7302 zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 vc032x 0ac8:0323 Vimicro Vc0323 diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index a15bccad947..83b5f740c94 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -56,12 +56,6 @@ MODULE_LICENSE("GPL"); #define PAC207_GAIN_KNEE 20 #define PAC207_AUTOGAIN_DEADZONE 30 -/* We calculating the autogain at the end of the transfer of a frame, at this - moment a frame with the old settings is being transmitted, and a frame is - being captured with the old settings. So if we adjust the autogain we must - ignore atleast the 2 next frames for the new settings to come into effect - before doing any other adjustments */ -#define PAC207_AUTOGAIN_IGNORE_FRAMES 3 /* specific webcam descriptor */ struct sd { @@ -338,6 +332,9 @@ static void sd_stopN(struct gspca_dev *gspca_dev) pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */ } +/* Include pac common sof detection functions */ +#include "pac_common.h" + static void pac207_do_auto_gain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -351,12 +348,9 @@ static void pac207_do_auto_gain(struct gspca_dev *gspca_dev) else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, 100 + sd->brightness / 2, PAC207_AUTOGAIN_DEADZONE, PAC207_GAIN_KNEE, PAC207_EXPOSURE_KNEE)) - sd->autogain_ignore_frames = PAC207_AUTOGAIN_IGNORE_FRAMES; + sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES; } -/* Include pac common sof detection functions */ -#include "pac_common.h" - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, __u8 *data, @@ -500,7 +494,7 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) sd->gain = PAC207_GAIN_DEFAULT; if (gspca_dev->streaming) { sd->autogain_ignore_frames = - PAC207_AUTOGAIN_IGNORE_FRAMES; + PAC_AUTOGAIN_IGNORE_FRAMES; setexposure(gspca_dev); setgain(gspca_dev); } diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index e22ca610334..14b98111cd9 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -44,6 +44,9 @@ 0x10/- Master gain 0-31 -/0x10 Another gain 0-15, limited influence (1-2x gain I guess) 0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused + -/0x27 Seems to toggle various gains on / off, Setting bit 7 seems to + completely disable the analog amplification block. Set to 0x68 + for max gain, 0x14 for minimal gain. */ #define MODULE_NAME "pac7311" @@ -61,6 +64,8 @@ struct sd { unsigned char brightness; unsigned char contrast; unsigned char colors; + unsigned char gain; + unsigned char exposure; unsigned char autogain; __u8 hflip; __u8 vflip; @@ -88,8 +93,14 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { +/* This control is pac7302 only */ +#define BRIGHTNESS_IDX 0 { { .id = V4L2_CID_BRIGHTNESS, @@ -105,6 +116,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setbrightness, .get = sd_getbrightness, }, +/* This control is for both the 7302 and the 7311 */ { { .id = V4L2_CID_CONTRAST, @@ -120,6 +132,8 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcontrast, .get = sd_getcontrast, }, +/* This control is pac7302 only */ +#define SATURATION_IDX 2 { { .id = V4L2_CID_SATURATION, @@ -135,6 +149,39 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcolors, .get = sd_getcolors, }, +/* All controls below are for both the 7302 and the 7311 */ + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, +#define GAIN_MAX 255 + .maximum = GAIN_MAX, + .step = 1, +#define GAIN_DEF 127 +#define GAIN_KNEE 255 /* Gain seems to cause little noise on the pac73xx */ + .default_value = GAIN_DEF, + }, + .set = sd_setgain, + .get = sd_getgain, + }, + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, +#define EXPOSURE_MAX 255 + .maximum = EXPOSURE_MAX, + .step = 1, +#define EXPOSURE_DEF 16 /* 32 ms / 30 fps */ +#define EXPOSURE_KNEE 50 /* 100 ms / 10 fps */ + .default_value = EXPOSURE_DEF, + }, + .set = sd_setexposure, + .get = sd_getexposure, + }, { { .id = V4L2_CID_AUTOGAIN, @@ -149,8 +196,6 @@ static struct ctrl sd_ctrls[] = { .set = sd_setautogain, .get = sd_getautogain, }, -/* next controls work with pac7302 only */ -#define HFLIP_IDX 4 { { .id = V4L2_CID_HFLIP, @@ -165,7 +210,6 @@ static struct ctrl sd_ctrls[] = { .set = sd_sethflip, .get = sd_gethflip, }, -#define VFLIP_IDX 5 { { .id = V4L2_CID_VFLIP, @@ -345,7 +389,7 @@ static const __u8 page4_7311[] = { 0x09, 0x00, 0xaa, 0xaa, 0x07, 0x00, 0x00, 0x62, 0x08, 0xaa, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xa0, 0x01, 0xf4, 0xaa, - 0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x01, + 0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x68, 0xca, 0x10, 0x06, 0x78, 0x00, 0x00, 0x00, 0x00, 0x23, 0x28, 0x04, 0x11, 0x00, 0x00 }; @@ -374,7 +418,7 @@ static void reg_w(struct gspca_dev *gspca_dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0, /* request */ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, index, gspca_dev->usb_buf, 1, + 0, index, gspca_dev->usb_buf, 1, 500); } @@ -469,20 +513,22 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->cam_mode = vga_mode; cam->nmodes = ARRAY_SIZE(vga_mode); - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) - | (1 << VFLIP_IDX); + gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX) + | (1 << SATURATION_IDX); } sd->brightness = BRIGHTNESS_DEF; sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; + sd->gain = GAIN_DEF; + sd->exposure = EXPOSURE_DEF; sd->autogain = AUTOGAIN_DEF; sd->hflip = HFLIP_DEF; sd->vflip = VFLIP_DEF; return 0; } -/* rev 12a only */ +/* This function is used by pac7302 only */ static void setbrightcont(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -509,67 +555,95 @@ static void setbrightcont(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0xdc, 0x01); } -/* This function is used by pac7302 only */ -static void setbrightness(struct gspca_dev *gspca_dev) +/* This function is used by pac7311 only */ +static void setcontrast(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int brightness; - - if (sd->sensor == SENSOR_PAC7302) { - setbrightcont(gspca_dev); - return; - } -/* HDG: this is not brightness but gain, I'll add gain and exposure controls - in a next patch */ - return; - brightness = BRIGHTNESS_MAX - sd->brightness; reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x0e, 0x00); - reg_w(gspca_dev, 0x0f, brightness); + reg_w(gspca_dev, 0x10, sd->contrast >> 4); /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); - PDEBUG(D_CONF|D_STREAM, "brightness: %i", brightness); } -static void setcontrast(struct gspca_dev *gspca_dev) +/* This function is used by pac7302 only */ +static void setcolors(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i, v; + static const int a[9] = + {217, -212, 0, -101, 170, -67, -38, -315, 355}; + static const int b[9] = + {19, 106, 0, 19, 106, 1, 19, 106, 1}; + + reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ + reg_w(gspca_dev, 0x11, 0x01); + reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ + reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ + for (i = 0; i < 9; i++) { + v = a[i] * sd->colors / COLOR_MAX + b[i]; + reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07); + reg_w(gspca_dev, 0x0f + 2 * i + 1, v); + } + reg_w(gspca_dev, 0xdc, 0x01); + PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors); +} + +static void setgain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; if (sd->sensor == SENSOR_PAC7302) { - setbrightcont(gspca_dev); - return; + reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ + reg_w(gspca_dev, 0x10, sd->gain >> 3); + } else { + int gain = GAIN_MAX - sd->gain; + if (gain < 1) + gain = 1; + else if (gain > 245) + gain = 245; + reg_w(gspca_dev, 0xff, 0x04); /* page 4 */ + reg_w(gspca_dev, 0x0e, 0x00); + reg_w(gspca_dev, 0x0f, gain); } - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x10, sd->contrast >> 4); /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); } -/* This function is used by pac7302 only */ -static void setcolors(struct gspca_dev *gspca_dev) +static void setexposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + __u8 reg; + + /* register 2 of frame 3/4 contains the clock divider configuring the + no fps according to the formula: 60 / reg. sd->exposure is the + desired exposure time in ms. */ + reg = 120 * sd->exposure / 1000; + if (reg < 2) + reg = 2; + else if (reg > 63) + reg = 63; if (sd->sensor == SENSOR_PAC7302) { - int i, v; - static const int a[9] = - {217, -212, 0, -101, 170, -67, -38, -315, 355}; - static const int b[9] = - {19, 106, 0, 19, 106, 1, 19, 106, 1}; - - reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ - reg_w(gspca_dev, 0x11, 0x01); - reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ - reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ - for (i = 0; i < 9; i++) { - v = a[i] * sd->colors / COLOR_MAX + b[i]; - reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07); - reg_w(gspca_dev, 0x0f + 2 * i + 1, v); - } - reg_w(gspca_dev, 0xdc, 0x01); - PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors); + /* On the pac7302 reg2 MUST be a multiple of 3, so round it to + the nearest multiple of 3 */ + reg = ((reg + 1) / 3) * 3; + reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ + reg_w(gspca_dev, 0x02, reg); + } else { + reg_w(gspca_dev, 0xff, 0x04); /* page 4 */ + reg_w(gspca_dev, 0x02, reg); + /* Page 1 register 8 must always be 0x08 except when not in + 640x480 mode and Page3/4 reg 2 <= 3 then it must be 9 */ + reg_w(gspca_dev, 0xff, 0x01); + if (gspca_dev->cam.cam_mode[(int)gspca_dev->curr_mode].priv && + reg <= 3) + reg_w(gspca_dev, 0x08, 0x09); + else + reg_w(gspca_dev, 0x08, 0x08); } + /* load registers to sensor (Bit 0, auto clear) */ + reg_w(gspca_dev, 0x11, 0x01); } static void sethvflip(struct gspca_dev *gspca_dev) @@ -579,14 +653,15 @@ static void sethvflip(struct gspca_dev *gspca_dev) if (sd->sensor == SENSOR_PAC7302) { reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ - data = (sd->hflip ? 0x00 : 0x08) + data = (sd->hflip ? 0x08 : 0x00) | (sd->vflip ? 0x04 : 0x00); } else { - reg_w(gspca_dev, 0xff, 0x04); /* page 3 */ + reg_w(gspca_dev, 0xff, 0x04); /* page 4 */ data = (sd->hflip ? 0x04 : 0x00) | (sd->vflip ? 0x08 : 0x00); } reg_w(gspca_dev, 0x21, data); + /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); } @@ -602,61 +677,49 @@ static void sd_start(struct gspca_dev *gspca_dev) sd->sof_read = 0; - if (sd->sensor == SENSOR_PAC7302) + if (sd->sensor == SENSOR_PAC7302) { reg_w_var(gspca_dev, start_7302); - else + setbrightcont(gspca_dev); + setcolors(gspca_dev); + } else { reg_w_var(gspca_dev, start_7311); - - setcontrast(gspca_dev); - setbrightness(gspca_dev); - setcolors(gspca_dev); + setcontrast(gspca_dev); + } + setgain(gspca_dev); + setexposure(gspca_dev); + sethvflip(gspca_dev); /* set correct resolution */ switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) { case 2: /* 160x120 pac7311 */ - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x02, 0x03); reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x08, 0x09); reg_w(gspca_dev, 0x17, 0x20); - reg_w(gspca_dev, 0x1b, 0x00); reg_w(gspca_dev, 0x87, 0x10); break; case 1: /* 320x240 pac7311 */ - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x02, 0x03); reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x08, 0x09); reg_w(gspca_dev, 0x17, 0x30); reg_w(gspca_dev, 0x87, 0x11); break; case 0: /* 640x480 */ if (sd->sensor == SENSOR_PAC7302) break; - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x02, 0x07); reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x08, 0x08); reg_w(gspca_dev, 0x17, 0x00); reg_w(gspca_dev, 0x87, 0x12); break; } - /* start stream */ - reg_w(gspca_dev, 0xff, 0x01); - if (sd->sensor == SENSOR_PAC7302) { - sethvflip(gspca_dev); - reg_w(gspca_dev, 0x78, 0x01); - reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x78, 0x01); - } else { - reg_w(gspca_dev, 0x78, 0x44); - reg_w(gspca_dev, 0x78, 0x45); - } - sd->sof_read = 0; sd->autogain_ignore_frames = 0; atomic_set(&sd->avg_lum, -1); + + /* start stream */ + reg_w(gspca_dev, 0xff, 0x01); + if (sd->sensor == SENSOR_PAC7302) + reg_w(gspca_dev, 0x78, 0x01); + else + reg_w(gspca_dev, 0x78, 0x05); } static void sd_stopN(struct gspca_dev *gspca_dev) @@ -691,8 +754,28 @@ static void sd_stop0(struct gspca_dev *gspca_dev) } } +/* Include pac common sof detection functions */ +#include "pac_common.h" + static void do_autogain(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + int avg_lum = atomic_read(&sd->avg_lum); + int desired_lum; + + if (avg_lum == -1) + return; + + if (sd->sensor == SENSOR_PAC7302) + desired_lum = 70 + sd->brightness * 2; + else + desired_lum = 200; + + if (sd->autogain_ignore_frames > 0) + sd->autogain_ignore_frames--; + else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum, + 10, GAIN_KNEE, EXPOSURE_KNEE)) + sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES; } static const unsigned char pac7311_jpeg_header1[] = { @@ -704,9 +787,6 @@ static const unsigned char pac7311_jpeg_header2[] = { 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00 }; -/* Include pac common sof detection functions */ -#include "pac_common.h" - /* this function is run at interrupt level */ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ @@ -790,7 +870,7 @@ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) sd->brightness = val; if (gspca_dev->streaming) - setbrightness(gspca_dev); + setbrightcont(gspca_dev); return 0; } @@ -807,8 +887,12 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->contrast = val; - if (gspca_dev->streaming) - setcontrast(gspca_dev); + if (gspca_dev->streaming) { + if (sd->sensor == SENSOR_PAC7302) + setbrightcont(gspca_dev); + else + setcontrast(gspca_dev); + } return 0; } @@ -838,11 +922,61 @@ static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->gain = val; + if (gspca_dev->streaming) + setgain(gspca_dev); + return 0; +} + +static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->gain; + return 0; +} + +static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->exposure = val; + if (gspca_dev->streaming) + setexposure(gspca_dev); + return 0; +} + +static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->exposure; + return 0; +} + static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; sd->autogain = val; + /* when switching to autogain set defaults to make sure + we are on a valid point of the autogain gain / + exposure knee graph, and give this change time to + take effect before doing autogain. */ + if (sd->autogain) { + sd->exposure = EXPOSURE_DEF; + sd->gain = GAIN_DEF; + if (gspca_dev->streaming) { + sd->autogain_ignore_frames = + PAC_AUTOGAIN_IGNORE_FRAMES; + setexposure(gspca_dev); + setgain(gspca_dev); + } + } return 0; } @@ -914,6 +1048,7 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x260e), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302}, + {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302}, {} }; MODULE_DEVICE_TABLE(usb, device_table); diff --git a/drivers/media/video/gspca/pac_common.h b/drivers/media/video/gspca/pac_common.h index a19b5d44c00..34d4b1494cd 100644 --- a/drivers/media/video/gspca/pac_common.h +++ b/drivers/media/video/gspca/pac_common.h @@ -23,6 +23,13 @@ * */ +/* We calculate the autogain at the end of the transfer of a frame, at this + moment a frame with the old settings is being transmitted, and a frame is + being captured with the old settings. So if we adjust the autogain we must + ignore atleast the 2 next frames for the new settings to come into effect + before doing any other adjustments */ +#define PAC_AUTOGAIN_IGNORE_FRAMES 3 + static const unsigned char pac_sof_marker[5] = { 0xff, 0xff, 0x00, 0xff, 0x96 }; @@ -37,7 +44,7 @@ static unsigned char *pac_find_sof(struct gspca_dev *gspca_dev, if (m[i] == pac_sof_marker[sd->sof_read]) { sd->sof_read++; if (sd->sof_read == sizeof(pac_sof_marker)) { - PDEBUG(D_STREAM, + PDEBUG(D_FRAM, "SOF found, bytes to analyze: %u." " Frame starts at byte #%u", len, i + 1); -- cgit v1.2.3-70-g09d2 From 086272555d1b7936512de1e6d9efacdf87169cb0 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:17 -0300 Subject: V4L/DVB (8826): gspca: Webcam Labtec 2200 (093a:2626) added in pac7311. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac7311.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index c503467da25..0f03900c48f 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -189,6 +189,7 @@ pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 pac7311 093a:260f SnakeCam pac7311 093a:2621 PAC731x pac7311 093a:2624 PAC7302 +pac7311 093a:2626 Labtec 2200 zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 vc032x 0ac8:0323 Vimicro Vc0323 diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 14b98111cd9..35244cf9851 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -1049,6 +1049,7 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302}, + {USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302}, {} }; MODULE_DEVICE_TABLE(usb, device_table); -- cgit v1.2.3-70-g09d2 From 71bb49596bbf4e5a3328e1704d18604e822ba181 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Query supported CCIDs This provides a data structure to record which CCIDs are locally supported and three accessor functions: - a test function for internal use which is used to validate CCID requests made by the user; - a copy function so that the list can be used for feature-negotiation; - documented getsockopt() support so that the user can query capabilities. The data structure is a table which is filled in at compile-time with the list of available CCIDs (which in turn depends on the Kconfig choices). Using the copy function for cloning the list of supported CCIDs is useful for feature negotiation, since the negotiation is now with the full list of available CCIDs (e.g. {2, 3}) instead of the default value {2}. This means negotiation will not fail if the peer requests to use CCID3 instead of CCID2. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- Documentation/networking/dccp.txt | 4 ++++ include/linux/dccp.h | 1 + net/dccp/ccid.c | 48 +++++++++++++++++++++++++++++++++++++++ net/dccp/ccid.h | 5 ++++ net/dccp/feat.c | 4 ++++ net/dccp/proto.c | 2 ++ 6 files changed, 64 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index 39131a3c78f..f0aeb20fa63 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -57,6 +57,10 @@ can be set before calling bind(). DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet size (application payload size) in bytes, see RFC 4340, section 14. +DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs +supported by the endpoint (see include/linux/dccp.h for symbolic constants). +The caller needs to provide a sufficiently large (> 2) array of type uint8_t. + DCCP_SOCKOPT_SERVER_TIMEWAIT enables the server (listening socket) to hold timewait state when closing the connection (RFC 4340, 8.3). The usual case is that the closing server sends a CloseReq, whereupon the client holds timewait diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 484b8a1fb02..d3ac1bde60b 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -209,6 +209,7 @@ struct dccp_so_feat { #define DCCP_SOCKOPT_SERVER_TIMEWAIT 6 #define DCCP_SOCKOPT_SEND_CSCOV 10 #define DCCP_SOCKOPT_RECV_CSCOV 11 +#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 #define DCCP_SOCKOPT_CCID_RX_INFO 128 #define DCCP_SOCKOPT_CCID_TX_INFO 192 diff --git a/net/dccp/ccid.c b/net/dccp/ccid.c index 4809753d12a..f72ca83df55 100644 --- a/net/dccp/ccid.c +++ b/net/dccp/ccid.c @@ -13,6 +13,13 @@ #include "ccid.h" +static u8 builtin_ccids[] = { + DCCPC_CCID2, /* CCID2 is supported by default */ +#if defined(CONFIG_IP_DCCP_CCID3) || defined(CONFIG_IP_DCCP_CCID3_MODULE) + DCCPC_CCID3, +#endif +}; + static struct ccid_operations *ccids[CCID_MAX]; #if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT) static atomic_t ccids_lockct = ATOMIC_INIT(0); @@ -86,6 +93,47 @@ static void ccid_kmem_cache_destroy(struct kmem_cache *slab) } } +/* check that up to @array_len members in @ccid_array are supported */ +bool ccid_support_check(u8 const *ccid_array, u8 array_len) +{ + u8 i, j, found; + + for (i = 0, found = 0; i < array_len; i++, found = 0) { + for (j = 0; !found && j < ARRAY_SIZE(builtin_ccids); j++) + found = (ccid_array[i] == builtin_ccids[j]); + if (!found) + return false; + } + return true; +} + +/** + * ccid_get_builtin_ccids - Provide copy of `builtin' CCID array + * @ccid_array: pointer to copy into + * @array_len: value to return length into + * This function allocates memory - caller must see that it is freed after use. + */ +int ccid_get_builtin_ccids(u8 **ccid_array, u8 *array_len) +{ + *ccid_array = kmemdup(builtin_ccids, sizeof(builtin_ccids), gfp_any()); + if (*ccid_array == NULL) + return -ENOBUFS; + *array_len = ARRAY_SIZE(builtin_ccids); + return 0; +} + +int ccid_getsockopt_builtin_ccids(struct sock *sk, int len, + char __user *optval, int __user *optlen) +{ + if (len < sizeof(builtin_ccids)) + return -EINVAL; + + if (put_user(sizeof(builtin_ccids), optlen) || + copy_to_user(optval, builtin_ccids, sizeof(builtin_ccids))) + return -EFAULT; + return 0; +} + int ccid_register(struct ccid_operations *ccid_ops) { int err = -ENOBUFS; diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h index fdeae7b5731..259f5469d7d 100644 --- a/net/dccp/ccid.h +++ b/net/dccp/ccid.h @@ -103,6 +103,11 @@ static inline void *ccid_priv(const struct ccid *ccid) return (void *)ccid->ccid_priv; } +extern bool ccid_support_check(u8 const *ccid_array, u8 array_len); +extern int ccid_get_builtin_ccids(u8 **ccid_array, u8 *array_len); +extern int ccid_getsockopt_builtin_ccids(struct sock *sk, int len, + char __user *, int __user *); + extern struct ccid *ccid_new(unsigned char id, struct sock *sk, int rx, gfp_t gfp); diff --git a/net/dccp/feat.c b/net/dccp/feat.c index b859722fba7..9399554878c 100644 --- a/net/dccp/feat.c +++ b/net/dccp/feat.c @@ -383,6 +383,10 @@ static int __feat_register_sp(struct list_head *fn, u8 feat, u8 is_local, !dccp_feat_sp_list_ok(feat, sp_val, sp_len)) return -EINVAL; + /* Avoid negotiating alien CCIDs by only advertising supported ones */ + if (feat == DCCPF_CCID && !ccid_support_check(sp_val, sp_len)) + return -EOPNOTSUPP; + if (dccp_feat_clone_sp_val(&fval, sp_val, sp_len)) return -ENOMEM; diff --git a/net/dccp/proto.c b/net/dccp/proto.c index 01332fe7a99..b4b10cbd888 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -649,6 +649,8 @@ static int do_dccp_getsockopt(struct sock *sk, int level, int optname, case DCCP_SOCKOPT_GET_CUR_MPS: val = dp->dccps_mss_cache; break; + case DCCP_SOCKOPT_AVAILABLE_CCIDS: + return ccid_getsockopt_builtin_ccids(sk, len, optval, optlen); case DCCP_SOCKOPT_SERVER_TIMEWAIT: val = dp->dccps_server_timewait; break; -- cgit v1.2.3-70-g09d2 From 17c30b40ed79e9f3955e884632c8f01e577b204a Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Deprecate Ack Ratio sysctl This patch deprecates the Ack Ratio sysctl, since * Ack Ratio is entirely ignored by CCID-3 and CCID-4, * Ack Ratio currently doesn't work in CCID-2 (i.e. is always set to 1); * even if it would work in CCID-2, there is no point for a user to change it: - Ack Ratio is constrained by cwnd (RFC 4341, 6.1.2), - if Ack Ratio > cwnd, the system resorts to spurious RTO timeouts (since waiting for Acks which will never arrive in this window), - cwnd is not a user-configurable value. The only reasonable place for Ack Ratio is to print it for debugging. It is planned to do this later on, as part of e.g. dccp_probe. With this patch Ack Ratio is now under full control of feature negotiation: * Ack Ratio is resolved as a dependency of the selected CCID; * if the chosen CCID supports it (i.e. CCID == CCID-2), Ack Ratio is set to the default of 2, following RFC 4340, 11.3 - "New connections start with Ack Ratio 2 for both endpoints"; * what happens then is part of another patch set, since it concerns the dynamic update of Ack Ratio while the connection is in full flight. Thanks to Tomasz Grobelny for discussion leading up to this patch. Signed-off-by: Gerrit Renker Acked-by: Arnaldo Carvalho de Melo --- Documentation/networking/dccp.txt | 3 --- include/linux/dccp.h | 2 -- net/dccp/dccp.h | 1 - net/dccp/minisocks.c | 1 - net/dccp/options.c | 1 - net/dccp/sysctl.c | 7 ------- 6 files changed, 15 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index f0aeb20fa63..43df4487379 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -125,9 +125,6 @@ send_ndp = 1 send_ackvec = 1 Whether or not to send Ack Vector options (sec. 11.5). -ack_ratio = 2 - The default Ack Ratio (sec. 11.3) to use. - tx_ccid = 2 Default CCID for the sender-receiver half-connection. diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 5a5a89935db..eda389ce04f 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -368,7 +368,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * @dccpms_ccid - Congestion Control Id (CCID) (section 10) * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) - * @dccpms_ack_ratio - Ack Ratio Feature (section 11.3) * @dccpms_pending - List of features being negotiated * @dccpms_conf - */ @@ -378,7 +377,6 @@ struct dccp_minisock { __u8 dccpms_tx_ccid; __u8 dccpms_send_ack_vector; __u8 dccpms_send_ndp_count; - __u8 dccpms_ack_ratio; struct list_head dccpms_pending; struct list_head dccpms_conf; }; diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index e656dafb5d9..031ce350d3c 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -98,7 +98,6 @@ extern int sysctl_dccp_retries2; extern int sysctl_dccp_feat_sequence_window; extern int sysctl_dccp_feat_rx_ccid; extern int sysctl_dccp_feat_tx_ccid; -extern int sysctl_dccp_feat_ack_ratio; extern int sysctl_dccp_feat_send_ack_vector; extern int sysctl_dccp_feat_send_ndp_count; extern int sysctl_dccp_tx_qlen; diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index e487133ae07..ee7f40f8ddf 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -47,7 +47,6 @@ void dccp_minisock_init(struct dccp_minisock *dmsk) dmsk->dccpms_sequence_window = sysctl_dccp_feat_sequence_window; dmsk->dccpms_rx_ccid = sysctl_dccp_feat_rx_ccid; dmsk->dccpms_tx_ccid = sysctl_dccp_feat_tx_ccid; - dmsk->dccpms_ack_ratio = sysctl_dccp_feat_ack_ratio; dmsk->dccpms_send_ack_vector = sysctl_dccp_feat_send_ack_vector; dmsk->dccpms_send_ndp_count = sysctl_dccp_feat_send_ndp_count; } diff --git a/net/dccp/options.c b/net/dccp/options.c index 67a171a1268..515ad45013a 100644 --- a/net/dccp/options.c +++ b/net/dccp/options.c @@ -26,7 +26,6 @@ int sysctl_dccp_feat_sequence_window = DCCPF_INITIAL_SEQUENCE_WINDOW; int sysctl_dccp_feat_rx_ccid = DCCPF_INITIAL_CCID; int sysctl_dccp_feat_tx_ccid = DCCPF_INITIAL_CCID; -int sysctl_dccp_feat_ack_ratio = DCCPF_INITIAL_ACK_RATIO; int sysctl_dccp_feat_send_ack_vector = DCCPF_INITIAL_SEND_ACK_VECTOR; int sysctl_dccp_feat_send_ndp_count = DCCPF_INITIAL_SEND_NDP_COUNT; diff --git a/net/dccp/sysctl.c b/net/dccp/sysctl.c index 21295993fdb..f6e54f433e2 100644 --- a/net/dccp/sysctl.c +++ b/net/dccp/sysctl.c @@ -40,13 +40,6 @@ static struct ctl_table dccp_default_table[] = { .mode = 0644, .proc_handler = proc_dointvec, }, - { - .procname = "ack_ratio", - .data = &sysctl_dccp_feat_ack_ratio, - .maxlen = sizeof(sysctl_dccp_feat_ack_ratio), - .mode = 0644, - .proc_handler = proc_dointvec, - }, { .procname = "send_ackvec", .data = &sysctl_dccp_feat_send_ack_vector, -- cgit v1.2.3-70-g09d2 From fade756f18d42694e3acb00e3471ab43002cba16 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Set per-connection CCIDs via socket options With this patch, TX/RX CCIDs can now be changed on a per-connection basis, which overrides the defaults set by the global sysctl variables for TX/RX CCIDs. To make full use of this facility, the remaining patches of this patch set are needed, which track dependencies and activate negotiated feature values. Note on the maximum number of CCIDs that can be registered: ----------------------------------------------------------- The maximum number of CCIDs that can be registered on the socket is constrained by the space in a Confirm/Change feature negotiation option. The space in these in turn depends on the size of header options as defined in RFC 4340, 5.8. Since this is a recurring constant, it has been moved from ackvec.h into linux/dccp.h, clarifying its purpose. Relative to this size, the maximum number of CCID identifiers that can be present in a Confirm option (which always consumes 1 byte more than a Change option, cf. 6.1) is 2 bytes less than the maximum TLV size: one for the CCID-feature-type and one for the selected value. Signed-off-by: Gerrit Renker --- Documentation/networking/dccp.txt | 14 ++++++++++++++ include/linux/dccp.h | 5 +++++ net/dccp/ackvec.c | 9 ++++----- net/dccp/ackvec.h | 5 ++--- net/dccp/feat.h | 2 ++ net/dccp/proto.c | 34 ++++++++++++++++++++++++++++++++++ 6 files changed, 61 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index 43df4487379..610083ff73f 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -61,6 +61,20 @@ DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs supported by the endpoint (see include/linux/dccp.h for symbolic constants). The caller needs to provide a sufficiently large (> 2) array of type uint8_t. +DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same +time, combining the operation of the next two socket options. This option is +preferrable over the latter two, since often applications will use the same +type of CCID for both directions; and mixed use of CCIDs is not currently well +understood. This socket option takes as argument at least one uint8_t value, or +an array of uint8_t values, which must match available CCIDS (see above). CCIDs +must be registered on the socket before calling connect() or listen(). + +DCCP_SOCKOPT_TX_CCID is read/write. It returns the current CCID (if set) or sets +the preference list for the TX CCID, using the same format as DCCP_SOCKOPT_CCID. +Please note that the getsockopt argument type here is `int', not uint8_t. + +DCCP_SOCKOPT_RX_CCID is analogous to DCCP_SOCKOPT_TX_CCID, but for the RX CCID. + DCCP_SOCKOPT_SERVER_TIMEWAIT enables the server (listening socket) to hold timewait state when closing the connection (RFC 4340, 8.3). The usual case is that the closing server sends a CloseReq, whereupon the client holds timewait diff --git a/include/linux/dccp.h b/include/linux/dccp.h index eda389ce04f..6a72ff52a8a 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -168,6 +168,8 @@ enum { DCCPO_MIN_CCID_SPECIFIC = 128, DCCPO_MAX_CCID_SPECIFIC = 255, }; +/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */ +#define DCCP_SINGLE_OPT_MAXLEN 253 /* DCCP CCIDS */ enum { @@ -203,6 +205,9 @@ enum dccp_feature_numbers { #define DCCP_SOCKOPT_SEND_CSCOV 10 #define DCCP_SOCKOPT_RECV_CSCOV 11 #define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 +#define DCCP_SOCKOPT_CCID 13 +#define DCCP_SOCKOPT_TX_CCID 14 +#define DCCP_SOCKOPT_RX_CCID 15 #define DCCP_SOCKOPT_CCID_RX_INFO 128 #define DCCP_SOCKOPT_CCID_TX_INFO 192 diff --git a/net/dccp/ackvec.c b/net/dccp/ackvec.c index 1e8be246ad1..01e4d39fa23 100644 --- a/net/dccp/ackvec.c +++ b/net/dccp/ackvec.c @@ -12,7 +12,6 @@ #include "ackvec.h" #include "dccp.h" -#include #include #include #include @@ -68,7 +67,7 @@ int dccp_insert_option_ackvec(struct sock *sk, struct sk_buff *skb) struct dccp_sock *dp = dccp_sk(sk); struct dccp_ackvec *av = dp->dccps_hc_rx_ackvec; /* Figure out how many options do we need to represent the ackvec */ - const u16 nr_opts = DIV_ROUND_UP(av->av_vec_len, DCCP_MAX_ACKVEC_OPT_LEN); + const u8 nr_opts = DIV_ROUND_UP(av->av_vec_len, DCCP_SINGLE_OPT_MAXLEN); u16 len = av->av_vec_len + 2 * nr_opts, i; u32 elapsed_time; const unsigned char *tail, *from; @@ -100,8 +99,8 @@ int dccp_insert_option_ackvec(struct sock *sk, struct sk_buff *skb) for (i = 0; i < nr_opts; ++i) { int copylen = len; - if (len > DCCP_MAX_ACKVEC_OPT_LEN) - copylen = DCCP_MAX_ACKVEC_OPT_LEN; + if (len > DCCP_SINGLE_OPT_MAXLEN) + copylen = DCCP_SINGLE_OPT_MAXLEN; *to++ = DCCPO_ACK_VECTOR_0; *to++ = copylen + 2; @@ -432,7 +431,7 @@ found: int dccp_ackvec_parse(struct sock *sk, const struct sk_buff *skb, u64 *ackno, const u8 opt, const u8 *value, const u8 len) { - if (len > DCCP_MAX_ACKVEC_OPT_LEN) + if (len > DCCP_SINGLE_OPT_MAXLEN) return -1; /* dccp_ackvector_print(DCCP_SKB_CB(skb)->dccpd_ack_seq, value, len); */ diff --git a/net/dccp/ackvec.h b/net/dccp/ackvec.h index bcb64fb4ace..4ccee030524 100644 --- a/net/dccp/ackvec.h +++ b/net/dccp/ackvec.h @@ -11,15 +11,14 @@ * published by the Free Software Foundation. */ +#include #include #include #include #include -/* Read about the ECN nonce to see why it is 253 */ -#define DCCP_MAX_ACKVEC_OPT_LEN 253 /* We can spread an ack vector across multiple options */ -#define DCCP_MAX_ACKVEC_LEN (DCCP_MAX_ACKVEC_OPT_LEN * 2) +#define DCCP_MAX_ACKVEC_LEN (DCCP_SINGLE_OPT_MAXLEN * 2) #define DCCP_ACKVEC_STATE_RECEIVED 0 #define DCCP_ACKVEC_STATE_ECN_MARKED (1 << 6) diff --git a/net/dccp/feat.h b/net/dccp/feat.h index 2c92bd18e5f..b53b11717c4 100644 --- a/net/dccp/feat.h +++ b/net/dccp/feat.h @@ -22,6 +22,8 @@ /* Wmin=32 and Wmax=2^46-1 from 7.5.2 */ #define DCCPF_SEQ_WMIN 32 #define DCCPF_SEQ_WMAX 0x3FFFFFFFFFFFull +/* Maximum number of SP values that fit in a single (Confirm) option */ +#define DCCP_FEAT_MAX_SP_VALS (DCCP_SINGLE_OPT_MAXLEN - 2) enum dccp_feat_type { FEAT_AT_RX = 1, /* located at RX side of half-connection */ diff --git a/net/dccp/proto.c b/net/dccp/proto.c index e29bbf91405..2cd56df44d8 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -506,6 +506,36 @@ static int dccp_setsockopt_cscov(struct sock *sk, int cscov, bool rx) return rc; } +static int dccp_setsockopt_ccid(struct sock *sk, int type, + char __user *optval, int optlen) +{ + u8 *val; + int rc = 0; + + if (optlen < 1 || optlen > DCCP_FEAT_MAX_SP_VALS) + return -EINVAL; + + val = kmalloc(optlen, GFP_KERNEL); + if (val == NULL) + return -ENOMEM; + + if (copy_from_user(val, optval, optlen)) { + kfree(val); + return -EFAULT; + } + + lock_sock(sk); + if (type == DCCP_SOCKOPT_TX_CCID || type == DCCP_SOCKOPT_CCID) + rc = dccp_feat_register_sp(sk, DCCPF_CCID, 1, val, optlen); + + if (!rc && (type == DCCP_SOCKOPT_RX_CCID || type == DCCP_SOCKOPT_CCID)) + rc = dccp_feat_register_sp(sk, DCCPF_CCID, 0, val, optlen); + release_sock(sk); + + kfree(val); + return rc; +} + static int do_dccp_setsockopt(struct sock *sk, int level, int optname, char __user *optval, int optlen) { @@ -520,6 +550,10 @@ static int do_dccp_setsockopt(struct sock *sk, int level, int optname, case DCCP_SOCKOPT_CHANGE_R: DCCP_WARN("sockopt(CHANGE_L/R) is deprecated: fix your app\n"); return 0; + case DCCP_SOCKOPT_CCID: + case DCCP_SOCKOPT_RX_CCID: + case DCCP_SOCKOPT_TX_CCID: + return dccp_setsockopt_ccid(sk, optname, optval, optlen); } if (optlen < (int)sizeof(int)) -- cgit v1.2.3-70-g09d2 From 78673e24df27c76ec75565f4024d45c2c74ef148 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Remove obsolete parts of the old CCID interface The TX/RX CCIDs of the minisock are now redundant: similar to the Ack Vector case, their value equals initially that of the sysctl, but at the end of feature negotiation may be something different. The old interface removed by this patch thus has been replaced by the newer interface to dynamically query the currently loaded CCIDs earlier in this patch set. Also removed the constructors for the TX CCID and the RX CCID, since the switch rx/non-rx is done by the handler in minisocks.c (and the handler is the only place in the code where CCIDs are loaded). Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- Documentation/networking/dccp.txt | 5 +++-- include/linux/dccp.h | 3 --- net/dccp/ccid.c | 14 -------------- net/dccp/ccid.h | 5 ----- net/dccp/feat.c | 12 ------------ net/dccp/minisocks.c | 2 -- 6 files changed, 3 insertions(+), 38 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index 610083ff73f..a203d132dbe 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -140,10 +140,11 @@ send_ackvec = 1 Whether or not to send Ack Vector options (sec. 11.5). tx_ccid = 2 - Default CCID for the sender-receiver half-connection. + Default CCID for the sender-receiver half-connection. Depending on the + choice of CCID, the Send Ack Vector feature is enabled automatically. rx_ccid = 2 - Default CCID for the receiver-sender half-connection. + Default CCID for the receiver-sender half-connection; see tx_ccid. seq_window = 100 The initial sequence window (sec. 7.5.2). diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 6a72ff52a8a..46daea312d9 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -370,7 +370,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * Will be used to pass the state from dccp_request_sock to dccp_sock. * * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) - * @dccpms_ccid - Congestion Control Id (CCID) (section 10) * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) * @dccpms_pending - List of features being negotiated @@ -378,8 +377,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) */ struct dccp_minisock { __u64 dccpms_sequence_window; - __u8 dccpms_rx_ccid; - __u8 dccpms_tx_ccid; __u8 dccpms_send_ack_vector; __u8 dccpms_send_ndp_count; struct list_head dccpms_pending; diff --git a/net/dccp/ccid.c b/net/dccp/ccid.c index f72ca83df55..330372a1a0b 100644 --- a/net/dccp/ccid.c +++ b/net/dccp/ccid.c @@ -253,20 +253,6 @@ out_module_put: EXPORT_SYMBOL_GPL(ccid_new); -struct ccid *ccid_hc_rx_new(unsigned char id, struct sock *sk, gfp_t gfp) -{ - return ccid_new(id, sk, 1, gfp); -} - -EXPORT_SYMBOL_GPL(ccid_hc_rx_new); - -struct ccid *ccid_hc_tx_new(unsigned char id,struct sock *sk, gfp_t gfp) -{ - return ccid_new(id, sk, 0, gfp); -} - -EXPORT_SYMBOL_GPL(ccid_hc_tx_new); - static void ccid_delete(struct ccid *ccid, struct sock *sk, int rx) { struct ccid_operations *ccid_ops; diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h index 803343aed00..18f69423a70 100644 --- a/net/dccp/ccid.h +++ b/net/dccp/ccid.h @@ -111,11 +111,6 @@ extern int ccid_getsockopt_builtin_ccids(struct sock *sk, int len, extern struct ccid *ccid_new(unsigned char id, struct sock *sk, int rx, gfp_t gfp); -extern struct ccid *ccid_hc_rx_new(unsigned char id, struct sock *sk, - gfp_t gfp); -extern struct ccid *ccid_hc_tx_new(unsigned char id, struct sock *sk, - gfp_t gfp); - static inline int ccid_get_current_rx_ccid(struct dccp_sock *dp) { struct ccid *ccid = dp->dccps_hc_rx_ccid; diff --git a/net/dccp/feat.c b/net/dccp/feat.c index 6c82dea409d..cb2ddd2b894 100644 --- a/net/dccp/feat.c +++ b/net/dccp/feat.c @@ -1119,18 +1119,6 @@ int dccp_feat_init(struct sock *sk) INIT_LIST_HEAD(&dmsk->dccpms_pending); /* XXX no longer used */ INIT_LIST_HEAD(&dmsk->dccpms_conf); /* XXX no longer used */ - /* CCID L */ - rc = __feat_register_sp(&dp->dccps_featneg, DCCPF_CCID, 1, 0, - &dmsk->dccpms_tx_ccid, 1); - if (rc) - goto out; - - /* CCID R */ - rc = __feat_register_sp(&dp->dccps_featneg, DCCPF_CCID, 0, 0, - &dmsk->dccpms_rx_ccid, 1); - if (rc) - goto out; - /* Ack ratio */ rc = __feat_register_nn(&dp->dccps_featneg, DCCPF_ACK_RATIO, 0, dp->dccps_l_ack_ratio); diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index 258195972bc..486d61df260 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -45,8 +45,6 @@ EXPORT_SYMBOL_GPL(dccp_death_row); void dccp_minisock_init(struct dccp_minisock *dmsk) { dmsk->dccpms_sequence_window = sysctl_dccp_feat_sequence_window; - dmsk->dccpms_rx_ccid = sysctl_dccp_feat_rx_ccid; - dmsk->dccpms_tx_ccid = sysctl_dccp_feat_tx_ccid; dmsk->dccpms_send_ack_vector = sysctl_dccp_feat_send_ack_vector; dmsk->dccpms_send_ndp_count = sysctl_dccp_feat_send_ndp_count; } -- cgit v1.2.3-70-g09d2 From 68e074bfcef269bc61006c2740d7f89ccbbd93d7 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Remove manual influence on NDP Count feature Updating the NDP count feature is handled automatically now: * for CCID-2 it is disabled, since the code does not use NDP counts; * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths. Allowing the user to change NDP values leads to unpredictable and failing behaviour, since it is then possible to disable NDP counts even when they are needed (e.g. in CCID-3). This means that only those user settings are sensible that agree with the values for Send NDP Count implied by the choice of CCID. But those settings are already activated by the feature negotiation (CCID dependency tracking), hence this form of support is redundant. At startup the initialisation of the NDP count feature is with the default value of 0, which is done implicitly by the zeroing-out of the socket when it is allocated. If the choice of CCID or feature negotiation enables NDP count, this will then be updated via the NDP activation handler. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- Documentation/networking/dccp.txt | 3 --- include/linux/dccp.h | 4 ++-- net/dccp/dccp.h | 1 - net/dccp/feat.c | 2 +- net/dccp/minisocks.c | 1 - net/dccp/options.c | 4 +--- net/dccp/sysctl.c | 7 ------- 7 files changed, 4 insertions(+), 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index a203d132dbe..1403745ab40 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -133,9 +133,6 @@ retries2 importance for retransmitted acknowledgments and feature negotiation, data packets are never retransmitted. Analogue of tcp_retries2. -send_ndp = 1 - Whether or not to send NDP count options (sec. 7.7.2). - send_ackvec = 1 Whether or not to send Ack Vector options (sec. 11.5). diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 46daea312d9..60e94438ead 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -371,14 +371,12 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) - * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) * @dccpms_pending - List of features being negotiated * @dccpms_conf - */ struct dccp_minisock { __u64 dccpms_sequence_window; __u8 dccpms_send_ack_vector; - __u8 dccpms_send_ndp_count; struct list_head dccpms_pending; struct list_head dccpms_conf; }; @@ -490,6 +488,7 @@ struct dccp_ackvec; * @dccps_r_ack_ratio - feature-remote Ack Ratio * @dccps_pcslen - sender partial checksum coverage (via sockopt) * @dccps_pcrlen - receiver partial checksum coverage (via sockopt) + * @dccps_send_ndp_count - local Send NDP Count feature (7.7.2) * @dccps_ndp_count - number of Non Data Packets since last data packet * @dccps_mss_cache - current value of MSS (path MTU minus header sizes) * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4) @@ -529,6 +528,7 @@ struct dccp_sock { __u16 dccps_r_ack_ratio; __u8 dccps_pcslen:4; __u8 dccps_pcrlen:4; + __u8 dccps_send_ndp_count:1; __u64 dccps_ndp_count:48; unsigned long dccps_rate_last; struct dccp_minisock dccps_minisock; diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 1baed789bcc..51436c82565 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -99,7 +99,6 @@ extern int sysctl_dccp_feat_sequence_window; extern int sysctl_dccp_feat_rx_ccid; extern int sysctl_dccp_feat_tx_ccid; extern int sysctl_dccp_feat_send_ack_vector; -extern int sysctl_dccp_feat_send_ndp_count; extern int sysctl_dccp_tx_qlen; extern int sysctl_dccp_sync_ratelimit; diff --git a/net/dccp/feat.c b/net/dccp/feat.c index cb2ddd2b894..35a57ab3bb1 100644 --- a/net/dccp/feat.c +++ b/net/dccp/feat.c @@ -86,7 +86,7 @@ static int dccp_hdlr_ackvec(struct sock *sk, u64 enable, bool rx) static int dccp_hdlr_ndp(struct sock *sk, u64 enable, bool rx) { if (!rx) - dccp_msk(sk)->dccpms_send_ndp_count = (enable > 0); + dccp_sk(sk)->dccps_send_ndp_count = (enable > 0); return 0; } diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index 486d61df260..9e223257266 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -46,7 +46,6 @@ void dccp_minisock_init(struct dccp_minisock *dmsk) { dmsk->dccpms_sequence_window = sysctl_dccp_feat_sequence_window; dmsk->dccpms_send_ack_vector = sysctl_dccp_feat_send_ack_vector; - dmsk->dccpms_send_ndp_count = sysctl_dccp_feat_send_ndp_count; } void dccp_time_wait(struct sock *sk, int state, int timeo) diff --git a/net/dccp/options.c b/net/dccp/options.c index 3a9a22f0ac1..6b0704497e8 100644 --- a/net/dccp/options.c +++ b/net/dccp/options.c @@ -27,7 +27,6 @@ int sysctl_dccp_feat_sequence_window = DCCPF_INITIAL_SEQUENCE_WINDOW; int sysctl_dccp_feat_rx_ccid = DCCPF_INITIAL_CCID; int sysctl_dccp_feat_tx_ccid = DCCPF_INITIAL_CCID; int sysctl_dccp_feat_send_ack_vector = DCCPF_INITIAL_SEND_ACK_VECTOR; -int sysctl_dccp_feat_send_ndp_count = DCCPF_INITIAL_SEND_NDP_COUNT; u64 dccp_decode_value_var(const u8 *bf, const u8 len) { @@ -531,8 +530,7 @@ int dccp_insert_options(struct sock *sk, struct sk_buff *skb) DCCP_SKB_CB(skb)->dccpd_opt_len = 0; - if (dmsk->dccpms_send_ndp_count && - dccp_insert_option_ndp(sk, skb)) + if (dp->dccps_send_ndp_count && dccp_insert_option_ndp(sk, skb)) return -1; if (DCCP_SKB_CB(skb)->dccpd_type != DCCP_PKT_DATA) { diff --git a/net/dccp/sysctl.c b/net/dccp/sysctl.c index f6e54f433e2..587c12f915c 100644 --- a/net/dccp/sysctl.c +++ b/net/dccp/sysctl.c @@ -47,13 +47,6 @@ static struct ctl_table dccp_default_table[] = { .mode = 0644, .proc_handler = proc_dointvec, }, - { - .procname = "send_ndp", - .data = &sysctl_dccp_feat_send_ndp_count, - .maxlen = sizeof(sysctl_dccp_feat_send_ndp_count), - .mode = 0644, - .proc_handler = proc_dointvec, - }, { .procname = "request_retries", .data = &sysctl_dccp_request_retries, -- cgit v1.2.3-70-g09d2 From b235dc4abbc1356284bd0dc730efa711f394e0e2 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp ccid-2: Phase out the use of boolean Ack Vector sysctl This removes the use of the sysctl and the minisock variable for the Send Ack Vector feature, which is now handled fully dynamically via feature negotiation; i.e. when CCID2 is enabled, Ack Vectors are automatically enabled (as per RFC 4341, 4.). Using a sysctl in parallel to this implementation would open the door to crashes, since much of the code relies on tests of the boolean minisock / sysctl variable. Thus, this patch replaces all tests of type if (dccp_msk(sk)->dccpms_send_ack_vector) /* ... */ with if (dp->dccps_hc_rx_ackvec != NULL) /* ... */ The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature negotiation concluded that Ack Vectors are to be used on the half-connection. Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child), so that the test is a valid one. The activation handler for Ack Vectors is called as soon as the feature negotiation has concluded at the * server when the Ack marking the transition RESPOND => OPEN arrives; * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN. Adding the sequence number of the Response packet to the Ack Vector has been removed, since (a) connection establishment implies that the Response has been received; (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e. this entry will always be ignored; (c) it can not be used for anything useful - to detect loss for instance, only packets received after the loss can serve as pseudo-dupacks. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- Documentation/networking/dccp.txt | 3 --- include/linux/dccp.h | 3 --- net/dccp/dccp.h | 3 +-- net/dccp/diag.c | 2 +- net/dccp/input.c | 12 +++--------- net/dccp/minisocks.c | 1 - net/dccp/options.c | 7 ++----- net/dccp/proto.c | 3 +-- net/dccp/sysctl.c | 7 ------- 9 files changed, 8 insertions(+), 33 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index 1403745ab40..7a3bb1abb83 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -133,9 +133,6 @@ retries2 importance for retransmitted acknowledgments and feature negotiation, data packets are never retransmitted. Analogue of tcp_retries2. -send_ackvec = 1 - Whether or not to send Ack Vector options (sec. 11.5). - tx_ccid = 2 Default CCID for the sender-receiver half-connection. Depending on the choice of CCID, the Send Ack Vector feature is enabled automatically. diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 60e94438ead..61734e27abb 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -360,7 +360,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) #define DCCPF_INITIAL_SEQUENCE_WINDOW 100 #define DCCPF_INITIAL_ACK_RATIO 2 #define DCCPF_INITIAL_CCID DCCPC_CCID2 -#define DCCPF_INITIAL_SEND_ACK_VECTOR 1 /* FIXME: for now we're default to 1 but it should really be 0 */ #define DCCPF_INITIAL_SEND_NDP_COUNT 1 @@ -370,13 +369,11 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * Will be used to pass the state from dccp_request_sock to dccp_sock. * * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) - * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) * @dccpms_pending - List of features being negotiated * @dccpms_conf - */ struct dccp_minisock { __u64 dccpms_sequence_window; - __u8 dccpms_send_ack_vector; struct list_head dccpms_pending; struct list_head dccpms_conf; }; diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 51436c82565..3fd16e82c00 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -98,7 +98,6 @@ extern int sysctl_dccp_retries2; extern int sysctl_dccp_feat_sequence_window; extern int sysctl_dccp_feat_rx_ccid; extern int sysctl_dccp_feat_tx_ccid; -extern int sysctl_dccp_feat_send_ack_vector; extern int sysctl_dccp_tx_qlen; extern int sysctl_dccp_sync_ratelimit; @@ -434,7 +433,7 @@ static inline int dccp_ack_pending(const struct sock *sk) const struct dccp_sock *dp = dccp_sk(sk); return dp->dccps_timestamp_echo != 0 || #ifdef CONFIG_IP_DCCP_ACKVEC - (dccp_msk(sk)->dccpms_send_ack_vector && + (dp->dccps_hc_rx_ackvec != NULL && dccp_ackvec_pending(dp->dccps_hc_rx_ackvec)) || #endif inet_csk_ack_scheduled(sk); diff --git a/net/dccp/diag.c b/net/dccp/diag.c index d8a3509b26f..93aae7c9555 100644 --- a/net/dccp/diag.c +++ b/net/dccp/diag.c @@ -29,7 +29,7 @@ static void dccp_get_info(struct sock *sk, struct tcp_info *info) info->tcpi_backoff = icsk->icsk_backoff; info->tcpi_pmtu = icsk->icsk_pmtu_cookie; - if (dccp_msk(sk)->dccpms_send_ack_vector) + if (dp->dccps_hc_rx_ackvec != NULL) info->tcpi_options |= TCPI_OPT_SACK; ccid_hc_rx_get_info(dp->dccps_hc_rx_ccid, sk, info); diff --git a/net/dccp/input.c b/net/dccp/input.c index 0672b7e1763..5eb443f656c 100644 --- a/net/dccp/input.c +++ b/net/dccp/input.c @@ -163,7 +163,7 @@ static void dccp_event_ack_recv(struct sock *sk, struct sk_buff *skb) { struct dccp_sock *dp = dccp_sk(sk); - if (dccp_msk(sk)->dccpms_send_ack_vector) + if (dp->dccps_hc_rx_ackvec != NULL) dccp_ackvec_check_rcv_ackno(dp->dccps_hc_rx_ackvec, sk, DCCP_SKB_CB(skb)->dccpd_ack_seq); } @@ -375,7 +375,7 @@ int dccp_rcv_established(struct sock *sk, struct sk_buff *skb, if (DCCP_SKB_CB(skb)->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ) dccp_event_ack_recv(sk, skb); - if (dccp_msk(sk)->dccpms_send_ack_vector && + if (dp->dccps_hc_rx_ackvec != NULL && dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk, DCCP_SKB_CB(skb)->dccpd_seq, DCCP_ACKVEC_STATE_RECEIVED)) @@ -434,12 +434,6 @@ static int dccp_rcv_request_sent_state_process(struct sock *sk, dp->dccps_syn_rtt = dccp_sample_rtt(sk, 10 * (tstamp - dp->dccps_options_received.dccpor_timestamp_echo)); - if (dccp_msk(sk)->dccpms_send_ack_vector && - dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk, - DCCP_SKB_CB(skb)->dccpd_seq, - DCCP_ACKVEC_STATE_RECEIVED)) - goto out_invalid_packet; /* FIXME: change error code */ - /* Stop the REQUEST timer */ inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS); WARN_ON(sk->sk_send_head == NULL); @@ -637,7 +631,7 @@ int dccp_rcv_state_process(struct sock *sk, struct sk_buff *skb, if (dcb->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ) dccp_event_ack_recv(sk, skb); - if (dccp_msk(sk)->dccpms_send_ack_vector && + if (dp->dccps_hc_rx_ackvec != NULL && dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk, DCCP_SKB_CB(skb)->dccpd_seq, DCCP_ACKVEC_STATE_RECEIVED)) diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index 9e223257266..0ebf8ebcf3d 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -45,7 +45,6 @@ EXPORT_SYMBOL_GPL(dccp_death_row); void dccp_minisock_init(struct dccp_minisock *dmsk) { dmsk->dccpms_sequence_window = sysctl_dccp_feat_sequence_window; - dmsk->dccpms_send_ack_vector = sysctl_dccp_feat_send_ack_vector; } void dccp_time_wait(struct sock *sk, int state, int timeo) diff --git a/net/dccp/options.c b/net/dccp/options.c index 6b0704497e8..aca309e1663 100644 --- a/net/dccp/options.c +++ b/net/dccp/options.c @@ -26,7 +26,6 @@ int sysctl_dccp_feat_sequence_window = DCCPF_INITIAL_SEQUENCE_WINDOW; int sysctl_dccp_feat_rx_ccid = DCCPF_INITIAL_CCID; int sysctl_dccp_feat_tx_ccid = DCCPF_INITIAL_CCID; -int sysctl_dccp_feat_send_ack_vector = DCCPF_INITIAL_SEND_ACK_VECTOR; u64 dccp_decode_value_var(const u8 *bf, const u8 len) { @@ -145,8 +144,7 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq, case DCCPO_ACK_VECTOR_1: if (dccp_packet_without_ack(skb)) /* RFC 4340, 11.4 */ break; - - if (dccp_msk(sk)->dccpms_send_ack_vector && + if (dp->dccps_hc_rx_ackvec != NULL && dccp_ackvec_parse(sk, skb, &ackno, opt, value, len)) goto out_invalid_option; break; @@ -526,7 +524,6 @@ static void dccp_insert_option_padding(struct sk_buff *skb) int dccp_insert_options(struct sock *sk, struct sk_buff *skb) { struct dccp_sock *dp = dccp_sk(sk); - struct dccp_minisock *dmsk = dccp_msk(sk); DCCP_SKB_CB(skb)->dccpd_opt_len = 0; @@ -547,7 +544,7 @@ int dccp_insert_options(struct sock *sk, struct sk_buff *skb) if (dccp_insert_option_timestamp(sk, skb)) return -1; - } else if (dmsk->dccpms_send_ack_vector && + } else if (dp->dccps_hc_rx_ackvec != NULL && dccp_ackvec_pending(dp->dccps_hc_rx_ackvec) && dccp_insert_option_ackvec(sk, skb)) { return -1; diff --git a/net/dccp/proto.c b/net/dccp/proto.c index 0d420790b79..775eaa3d0c4 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -207,7 +207,6 @@ EXPORT_SYMBOL_GPL(dccp_init_sock); void dccp_destroy_sock(struct sock *sk) { struct dccp_sock *dp = dccp_sk(sk); - struct dccp_minisock *dmsk = dccp_msk(sk); /* * DCCP doesn't use sk_write_queue, just sk_send_head @@ -225,7 +224,7 @@ void dccp_destroy_sock(struct sock *sk) kfree(dp->dccps_service_list); dp->dccps_service_list = NULL; - if (dmsk->dccpms_send_ack_vector) { + if (dp->dccps_hc_rx_ackvec != NULL) { dccp_ackvec_free(dp->dccps_hc_rx_ackvec); dp->dccps_hc_rx_ackvec = NULL; } diff --git a/net/dccp/sysctl.c b/net/dccp/sysctl.c index 587c12f915c..018e210875e 100644 --- a/net/dccp/sysctl.c +++ b/net/dccp/sysctl.c @@ -40,13 +40,6 @@ static struct ctl_table dccp_default_table[] = { .mode = 0644, .proc_handler = proc_dointvec, }, - { - .procname = "send_ackvec", - .data = &sysctl_dccp_feat_send_ack_vector, - .maxlen = sizeof(sysctl_dccp_feat_send_ack_vector), - .mode = 0644, - .proc_handler = proc_dointvec, - }, { .procname = "request_retries", .data = &sysctl_dccp_request_retries, -- cgit v1.2.3-70-g09d2 From 51c7d4fa2675c106a980ddcdbe308b54b5151945 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Implement both feature-local and feature-remote Sequence Window feature This adds full support for local/remote Sequence Window feature, from which the * sequence-number-validity (W) and * acknowledgment-number-validity (W') windows derive as specified in RFC 4340, 7.5.3. Specifically, the following changes are introduced: * integrated new socket fields into dccp_sk; * updated the update_gsr/gss routines with regard to these fields; * updated handler code: the Sequence Window feature is located at the TX side, so the local feature is meant if the handler-rx flag is false; * the initialisation of `rcv_wnd' in reqsk is removed, since - rcv_wnd is not used by the code anywhere; - sequence number checks are not done in the LISTEN state (cf. 7.5.3); - dccp_check_req checks the Ack number validity more rigorously; * the `struct dccp_minisock' became empty and is now removed. Until the handshake completes with activating negotiated values, the local/remote Sequence-Window values are undefined and thus can not reliably be estimated. This issue is addressed in a separate patch. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- Documentation/networking/dccp.txt | 3 ++- include/linux/dccp.h | 24 ++++-------------------- net/dccp/dccp.h | 16 +++++++--------- net/dccp/feat.c | 13 +++++++++++-- net/dccp/minisocks.c | 11 ----------- net/dccp/proto.c | 2 -- 6 files changed, 24 insertions(+), 45 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index 7a3bb1abb83..b132e4a3cf0 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -141,7 +141,8 @@ rx_ccid = 2 Default CCID for the receiver-sender half-connection; see tx_ccid. seq_window = 100 - The initial sequence window (sec. 7.5.2). + The initial sequence window (sec. 7.5.2) of the sender. This influences + the local ackno validity and the remote seqno validity windows (7.5.1). tx_qlen = 5 The size of the transmit buffer in packets. A value of 0 corresponds diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 990e97fa1f0..7a0502ab383 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -363,19 +363,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) /* FIXME: for now we're default to 1 but it should really be 0 */ #define DCCPF_INITIAL_SEND_NDP_COUNT 1 -/** - * struct dccp_minisock - Minimal DCCP connection representation - * - * Will be used to pass the state from dccp_request_sock to dccp_sock. - * - * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) - */ -struct dccp_minisock { - __u64 dccpms_sequence_window; -}; - -extern void dccp_minisock_init(struct dccp_minisock *dmsk); - /** * struct dccp_request_sock - represent DCCP-specific connection request * @dreq_inet_rsk: structure inherited from @@ -464,13 +451,14 @@ struct dccp_ackvec; * @dccps_timestamp_time - time of receiving latest @dccps_timestamp_echo * @dccps_l_ack_ratio - feature-local Ack Ratio * @dccps_r_ack_ratio - feature-remote Ack Ratio + * @dccps_l_seq_win - local Sequence Window (influences ack number validity) + * @dccps_r_seq_win - remote Sequence Window (influences seq number validity) * @dccps_pcslen - sender partial checksum coverage (via sockopt) * @dccps_pcrlen - receiver partial checksum coverage (via sockopt) * @dccps_send_ndp_count - local Send NDP Count feature (7.7.2) * @dccps_ndp_count - number of Non Data Packets since last data packet * @dccps_mss_cache - current value of MSS (path MTU minus header sizes) * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4) - * @dccps_minisock - associated minisock (accessed via dccp_msk) * @dccps_featneg - tracks feature-negotiation state (mostly during handshake) * @dccps_hc_rx_ackvec - rx half connection ack vector * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection) @@ -504,12 +492,13 @@ struct dccp_sock { __u32 dccps_timestamp_time; __u16 dccps_l_ack_ratio; __u16 dccps_r_ack_ratio; + __u64 dccps_l_seq_win:48; + __u64 dccps_r_seq_win:48; __u8 dccps_pcslen:4; __u8 dccps_pcrlen:4; __u8 dccps_send_ndp_count:1; __u64 dccps_ndp_count:48; unsigned long dccps_rate_last; - struct dccp_minisock dccps_minisock; struct list_head dccps_featneg; struct dccp_ackvec *dccps_hc_rx_ackvec; struct ccid *dccps_hc_rx_ccid; @@ -527,11 +516,6 @@ static inline struct dccp_sock *dccp_sk(const struct sock *sk) return (struct dccp_sock *)sk; } -static inline struct dccp_minisock *dccp_msk(const struct sock *sk) -{ - return (struct dccp_minisock *)&dccp_sk(sk)->dccps_minisock; -} - static inline const char *dccp_role(const struct sock *sk) { switch (dccp_sk(sk)->dccps_role) { diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 3fd16e82c00..6101ecdb85b 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -409,23 +409,21 @@ static inline void dccp_hdr_set_ack(struct dccp_hdr_ack_bits *dhack, static inline void dccp_update_gsr(struct sock *sk, u64 seq) { struct dccp_sock *dp = dccp_sk(sk); - const struct dccp_minisock *dmsk = dccp_msk(sk); dp->dccps_gsr = seq; - dccp_set_seqno(&dp->dccps_swl, - dp->dccps_gsr + 1 - (dmsk->dccpms_sequence_window / 4)); - dccp_set_seqno(&dp->dccps_swh, - dp->dccps_gsr + (3 * dmsk->dccpms_sequence_window) / 4); + /* Sequence validity window depends on remote Sequence Window (7.5.1) */ + dp->dccps_swl = SUB48(ADD48(dp->dccps_gsr, 1), dp->dccps_r_seq_win / 4); + dp->dccps_swh = ADD48(dp->dccps_gsr, (3 * dp->dccps_r_seq_win) / 4); } static inline void dccp_update_gss(struct sock *sk, u64 seq) { struct dccp_sock *dp = dccp_sk(sk); - dp->dccps_awh = dp->dccps_gss = seq; - dccp_set_seqno(&dp->dccps_awl, - (dp->dccps_gss - - dccp_msk(sk)->dccpms_sequence_window + 1)); + dp->dccps_gss = seq; + /* Ack validity window depends on local Sequence Window value (7.5.1) */ + dp->dccps_awl = SUB48(ADD48(dp->dccps_gss, 1), dp->dccps_l_seq_win); + dp->dccps_awh = dp->dccps_gss; } static inline int dccp_ack_pending(const struct sock *sk) diff --git a/net/dccp/feat.c b/net/dccp/feat.c index 9a493809278..84346599985 100644 --- a/net/dccp/feat.c +++ b/net/dccp/feat.c @@ -52,8 +52,17 @@ static int dccp_hdlr_ccid(struct sock *sk, u64 ccid, bool rx) static int dccp_hdlr_seq_win(struct sock *sk, u64 seq_win, bool rx) { - if (!rx) - dccp_msk(sk)->dccpms_sequence_window = seq_win; + struct dccp_sock *dp = dccp_sk(sk); + + if (rx) { + dp->dccps_r_seq_win = seq_win; + /* propagate changes to update SWL/SWH */ + dccp_update_gsr(sk, dp->dccps_gsr); + } else { + dp->dccps_l_seq_win = seq_win; + /* propagate changes to update AWL */ + dccp_update_gss(sk, dp->dccps_gss); + } return 0; } diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index 0ebf8ebcf3d..0ecb19c5e8c 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -42,11 +42,6 @@ struct inet_timewait_death_row dccp_death_row = { EXPORT_SYMBOL_GPL(dccp_death_row); -void dccp_minisock_init(struct dccp_minisock *dmsk) -{ - dmsk->dccpms_sequence_window = sysctl_dccp_feat_sequence_window; -} - void dccp_time_wait(struct sock *sk, int state, int timeo) { struct inet_timewait_sock *tw = NULL; @@ -110,7 +105,6 @@ struct sock *dccp_create_openreq_child(struct sock *sk, struct dccp_request_sock *dreq = dccp_rsk(req); struct inet_connection_sock *newicsk = inet_csk(newsk); struct dccp_sock *newdp = dccp_sk(newsk); - struct dccp_minisock *newdmsk = dccp_msk(newsk); newdp->dccps_role = DCCP_ROLE_SERVER; newdp->dccps_hc_rx_ackvec = NULL; @@ -128,10 +122,6 @@ struct sock *dccp_create_openreq_child(struct sock *sk, * Initialize S.GAR := S.ISS * Set S.ISR, S.GSR, S.SWL, S.SWH from packet or Init Cookies */ - - /* See dccp_v4_conn_request */ - newdmsk->dccpms_sequence_window = req->rcv_wnd; - newdp->dccps_gar = newdp->dccps_iss = dreq->dreq_iss; dccp_update_gss(newsk, dreq->dreq_iss); @@ -289,7 +279,6 @@ int dccp_reqsk_init(struct request_sock *req, inet_rsk(req)->rmt_port = dccp_hdr(skb)->dccph_sport; inet_rsk(req)->acked = 0; - req->rcv_wnd = sysctl_dccp_feat_sequence_window; dreq->dreq_timestamp_echo = 0; /* inherit feature negotiation options from listening socket */ diff --git a/net/dccp/proto.c b/net/dccp/proto.c index 775eaa3d0c4..392a5d822b3 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -180,8 +180,6 @@ int dccp_init_sock(struct sock *sk, const __u8 ctl_sock_initialized) struct dccp_sock *dp = dccp_sk(sk); struct inet_connection_sock *icsk = inet_csk(sk); - dccp_minisock_init(&dp->dccps_minisock); - icsk->icsk_rto = DCCP_TIMEOUT_INIT; icsk->icsk_syn_retries = sysctl_dccp_request_retries; sk->sk_state = DCCP_CLOSED; -- cgit v1.2.3-70-g09d2 From d6da3511d6b558d0b017777b61dc08b8fbc06ea4 Mon Sep 17 00:00:00 2001 From: Tomasz Grobelny Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Policy-based packet dequeueing infrastructure This patch adds a generic infrastructure for policy-based dequeueing of TX packets and provides two policies: * a simple FIFO policy (which is the default) and * a priority based policy (set via socket options). Both policies honour the tx_qlen sysctl for the maximum size of the write queue (can be overridden via socket options). The priority policy uses skb->priority internally to assign an u32 priority identifier, using the same ranking as SO_PRIORITY. The skb->priority field is set to 0 when the packet leaves DCCP. The priority is supplied as ancillary data using cmsg(3), the patch also provides the requisite parsing routines. Signed-off-by: Tomasz Grobelny Signed-off-by: Gerrit Renker --- Documentation/networking/dccp.txt | 19 ++++++ include/linux/dccp.h | 21 +++++++ net/dccp/Makefile | 2 +- net/dccp/dccp.h | 12 ++++ net/dccp/output.c | 7 +-- net/dccp/proto.c | 67 +++++++++++++++++++- net/dccp/qpolicy.c | 126 ++++++++++++++++++++++++++++++++++++++ 7 files changed, 246 insertions(+), 8 deletions(-) create mode 100644 net/dccp/qpolicy.c (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index b132e4a3cf0..fcfc1253442 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -45,6 +45,25 @@ http://linux-net.osdl.org/index.php/DCCP_Testing#Experimental_DCCP_source_tree Socket options ============== +DCCP_SOCKOPT_QPOLICY_ID sets the dequeuing policy for outgoing packets. It takes +a policy ID as argument and can only be set before the connection (i.e. changes +during an established connection are not supported). Currently, two policies are +defined: the "simple" policy (DCCPQ_POLICY_SIMPLE), which does nothing special, +and a priority-based variant (DCCPQ_POLICY_PRIO). The latter allows to pass an +u32 priority value as ancillary data to sendmsg(), where higher numbers indicate +a higher packet priority (similar to SO_PRIORITY). This ancillary data needs to +be formatted using a cmsg(3) message header filled in as follows: + cmsg->cmsg_level = SOL_DCCP; + cmsg->cmsg_type = DCCP_SCM_PRIORITY; + cmsg->cmsg_len = CMSG_LEN(sizeof(uint32_t)); /* or CMSG_LEN(4) */ + +DCCP_SOCKOPT_QPOLICY_TXQLEN sets the maximum length of the output queue. A zero +value is always interpreted as unbounded queue length. If different from zero, +the interpretation of this parameter depends on the current dequeuing policy +(see above): the "simple" policy will enforce a fixed queue size by returning +EAGAIN, whereas the "prio" policy enforces a fixed queue length by dropping the +lowest-priority packet first. The default value for this parameter is +initialised from /proc/sys/net/dccp/default/tx_qlen. DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of service codes (RFC 4340, sec. 8.1.2); if this socket option is not set, diff --git a/include/linux/dccp.h b/include/linux/dccp.h index eed52bcd35d..010e2d87ed7 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -197,6 +197,21 @@ enum dccp_feature_numbers { DCCPF_MAX_CCID_SPECIFIC = 255, }; +/* DCCP socket control message types for cmsg */ +enum dccp_cmsg_type { + DCCP_SCM_PRIORITY = 1, + DCCP_SCM_QPOLICY_MAX = 0xFFFF, + /* ^-- Up to here reserved exclusively for qpolicy parameters */ + DCCP_SCM_MAX +}; + +/* DCCP priorities for outgoing/queued packets */ +enum dccp_packet_dequeueing_policy { + DCCPQ_POLICY_SIMPLE, + DCCPQ_POLICY_PRIO, + DCCPQ_POLICY_MAX +}; + /* DCCP socket options */ #define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */ #define DCCP_SOCKOPT_SERVICE 2 @@ -210,6 +225,8 @@ enum dccp_feature_numbers { #define DCCP_SOCKOPT_CCID 13 #define DCCP_SOCKOPT_TX_CCID 14 #define DCCP_SOCKOPT_RX_CCID 15 +#define DCCP_SOCKOPT_QPOLICY_ID 16 +#define DCCP_SOCKOPT_QPOLICY_TXQLEN 17 #define DCCP_SOCKOPT_CCID_RX_INFO 128 #define DCCP_SOCKOPT_CCID_TX_INFO 192 @@ -458,6 +475,8 @@ struct dccp_ackvec; * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection) * @dccps_hc_tx_ccid - CCID used for the sender (or sending half-connection) * @dccps_options_received - parsed set of retrieved options + * @dccps_qpolicy - TX dequeueing policy, one of %dccp_packet_dequeueing_policy + * @dccps_tx_qlen - maximum length of the TX queue * @dccps_role - role of this sock, one of %dccp_role * @dccps_hc_rx_insert_options - receiver wants to add options when acking * @dccps_hc_tx_insert_options - sender wants to add options when sending @@ -500,6 +519,8 @@ struct dccp_sock { struct ccid *dccps_hc_rx_ccid; struct ccid *dccps_hc_tx_ccid; struct dccp_options_received dccps_options_received; + __u8 dccps_qpolicy; + __u32 dccps_tx_qlen; enum dccp_role dccps_role:2; __u8 dccps_hc_rx_insert_options:1; __u8 dccps_hc_tx_insert_options:1; diff --git a/net/dccp/Makefile b/net/dccp/Makefile index b68440bd7fa..0c1c9af2bf7 100644 --- a/net/dccp/Makefile +++ b/net/dccp/Makefile @@ -1,7 +1,7 @@ obj-$(CONFIG_IP_DCCP) += dccp.o dccp_ipv4.o dccp-y := ccid.o feat.o input.o minisocks.o options.o \ - output.o proto.o timer.o ackvec.o + qpolicy.o output.o proto.o timer.o ackvec.o dccp_ipv4-y := ipv4.o diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 74c90cd2767..ce2dd6f6f34 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -234,6 +234,18 @@ extern void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, extern void dccp_send_sync(struct sock *sk, const u64 seq, const enum dccp_pkt_type pkt_type); +/* + * TX Packet Dequeueing Interface + */ +extern void dccp_qpolicy_push(struct sock *sk, struct sk_buff *skb); +extern bool dccp_qpolicy_full(struct sock *sk); +extern void dccp_qpolicy_drop(struct sock *sk, struct sk_buff *skb); +extern struct sk_buff *dccp_qpolicy_top(struct sock *sk); +extern struct sk_buff *dccp_qpolicy_pop(struct sock *sk); + +/* + * TX Packet Output and TX Timers + */ extern void dccp_write_xmit(struct sock *sk); extern void dccp_write_space(struct sock *sk); extern void dccp_flush_write_queue(struct sock *sk, long *time_budget); diff --git a/net/dccp/output.c b/net/dccp/output.c index b1eaf7bcfb1..2532797a800 100644 --- a/net/dccp/output.c +++ b/net/dccp/output.c @@ -241,7 +241,7 @@ static void dccp_xmit_packet(struct sock *sk) { int err, len; struct dccp_sock *dp = dccp_sk(sk); - struct sk_buff *skb = skb_dequeue(&sk->sk_write_queue); + struct sk_buff *skb = dccp_qpolicy_pop(sk); if (unlikely(skb == NULL)) return; @@ -344,7 +344,7 @@ void dccp_write_xmit(struct sock *sk) struct dccp_sock *dp = dccp_sk(sk); struct sk_buff *skb; - while ((skb = skb_peek(&sk->sk_write_queue))) { + while ((skb = dccp_qpolicy_top(sk))) { int rc = ccid_hc_tx_send_packet(dp->dccps_hc_tx_ccid, sk, skb); switch (ccid_packet_dequeue_eval(rc)) { @@ -358,8 +358,7 @@ void dccp_write_xmit(struct sock *sk) dccp_xmit_packet(sk); break; case CCID_PACKET_ERR: - skb_dequeue(&sk->sk_write_queue); - kfree_skb(skb); + dccp_qpolicy_drop(sk, skb); dccp_pr_debug("packet discarded due to err=%d\n", rc); } } diff --git a/net/dccp/proto.c b/net/dccp/proto.c index 8c125ffab1c..b56efdd2a42 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -189,6 +189,7 @@ int dccp_init_sock(struct sock *sk, const __u8 ctl_sock_initialized) dp->dccps_rate_last = jiffies; dp->dccps_role = DCCP_ROLE_UNDEFINED; dp->dccps_service = DCCP_SERVICE_CODE_IS_ABSENT; + dp->dccps_tx_qlen = sysctl_dccp_tx_qlen; dccp_init_xmit_timers(sk); @@ -541,6 +542,20 @@ static int do_dccp_setsockopt(struct sock *sk, int level, int optname, case DCCP_SOCKOPT_RECV_CSCOV: err = dccp_setsockopt_cscov(sk, val, true); break; + case DCCP_SOCKOPT_QPOLICY_ID: + if (sk->sk_state != DCCP_CLOSED) + err = -EISCONN; + else if (val < 0 || val >= DCCPQ_POLICY_MAX) + err = -EINVAL; + else + dp->dccps_qpolicy = val; + break; + case DCCP_SOCKOPT_QPOLICY_TXQLEN: + if (val < 0) + err = -EINVAL; + else + dp->dccps_tx_qlen = val; + break; default: err = -ENOPROTOOPT; break; @@ -648,6 +663,12 @@ static int do_dccp_getsockopt(struct sock *sk, int level, int optname, case DCCP_SOCKOPT_RECV_CSCOV: val = dp->dccps_pcrlen; break; + case DCCP_SOCKOPT_QPOLICY_ID: + val = dp->dccps_qpolicy; + break; + case DCCP_SOCKOPT_QPOLICY_TXQLEN: + val = dp->dccps_tx_qlen; + break; case 128 ... 191: return ccid_hc_rx_getsockopt(dp->dccps_hc_rx_ccid, sk, optname, len, (u32 __user *)optval, optlen); @@ -690,6 +711,43 @@ int compat_dccp_getsockopt(struct sock *sk, int level, int optname, EXPORT_SYMBOL_GPL(compat_dccp_getsockopt); #endif +static int dccp_msghdr_parse(struct msghdr *msg, struct sk_buff *skb) +{ + struct cmsghdr *cmsg = CMSG_FIRSTHDR(msg); + + /* + * Assign an (opaque) qpolicy priority value to skb->priority. + * + * We are overloading this skb field for use with the qpolicy subystem. + * The skb->priority is normally used for the SO_PRIORITY option, which + * is initialised from sk_priority. Since the assignment of sk_priority + * to skb->priority happens later (on layer 3), we overload this field + * for use with queueing priorities as long as the skb is on layer 4. + * The default priority value (if nothing is set) is 0. + */ + skb->priority = 0; + + for (; cmsg != NULL; cmsg = CMSG_NXTHDR(msg, cmsg)) { + + if (!CMSG_OK(msg, cmsg)) + return -EINVAL; + + if (cmsg->cmsg_level != SOL_DCCP) + continue; + + switch (cmsg->cmsg_type) { + case DCCP_SCM_PRIORITY: + if (cmsg->cmsg_len != CMSG_LEN(sizeof(__u32))) + return -EINVAL; + skb->priority = *(__u32 *)CMSG_DATA(cmsg); + break; + default: + return -EINVAL; + } + } + return 0; +} + int dccp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, size_t len) { @@ -705,8 +763,7 @@ int dccp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, lock_sock(sk); - if (sysctl_dccp_tx_qlen && - (sk->sk_write_queue.qlen >= sysctl_dccp_tx_qlen)) { + if (dccp_qpolicy_full(sk)) { rc = -EAGAIN; goto out_release; } @@ -734,7 +791,11 @@ int dccp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, if (rc != 0) goto out_discard; - skb_queue_tail(&sk->sk_write_queue, skb); + rc = dccp_msghdr_parse(msg, skb); + if (rc != 0) + goto out_discard; + + dccp_qpolicy_push(sk, skb); dccp_write_xmit(sk); out_release: release_sock(sk); diff --git a/net/dccp/qpolicy.c b/net/dccp/qpolicy.c new file mode 100644 index 00000000000..414696b0d83 --- /dev/null +++ b/net/dccp/qpolicy.c @@ -0,0 +1,126 @@ +/* + * net/dccp/qpolicy.c + * + * Policy-based packet dequeueing interface for DCCP. + * + * Copyright (c) 2008 Tomasz Grobelny + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License v2 + * as published by the Free Software Foundation. + */ +#include "dccp.h" + +/* + * Simple Dequeueing Policy: + * If tx_qlen is different from 0, enqueue up to tx_qlen elements. + */ +static void qpolicy_simple_push(struct sock *sk, struct sk_buff *skb) +{ + skb_queue_tail(&sk->sk_write_queue, skb); +} + +static bool qpolicy_simple_full(struct sock *sk) +{ + return dccp_sk(sk)->dccps_tx_qlen && + sk->sk_write_queue.qlen >= dccp_sk(sk)->dccps_tx_qlen; +} + +static struct sk_buff *qpolicy_simple_top(struct sock *sk) +{ + return skb_peek(&sk->sk_write_queue); +} + +/* + * Priority-based Dequeueing Policy: + * If tx_qlen is different from 0 and the queue has reached its upper bound + * of tx_qlen elements, replace older packets lowest-priority-first. + */ +static struct sk_buff *qpolicy_prio_best_skb(struct sock *sk) +{ + struct sk_buff *skb, *best = NULL; + + skb_queue_walk(&sk->sk_write_queue, skb) + if (best == NULL || skb->priority > best->priority) + best = skb; + return best; +} + +static struct sk_buff *qpolicy_prio_worst_skb(struct sock *sk) +{ + struct sk_buff *skb, *worst = NULL; + + skb_queue_walk(&sk->sk_write_queue, skb) + if (worst == NULL || skb->priority < worst->priority) + worst = skb; + return worst; +} + +static bool qpolicy_prio_full(struct sock *sk) +{ + if (qpolicy_simple_full(sk)) + dccp_qpolicy_drop(sk, qpolicy_prio_worst_skb(sk)); + return false; +} + +/** + * struct dccp_qpolicy_operations - TX Packet Dequeueing Interface + * @push: add a new @skb to the write queue + * @full: indicates that no more packets will be admitted + * @top: peeks at whatever the queueing policy defines as its `top' + */ +static struct dccp_qpolicy_operations { + void (*push) (struct sock *sk, struct sk_buff *skb); + bool (*full) (struct sock *sk); + struct sk_buff* (*top) (struct sock *sk); + +} qpol_table[DCCPQ_POLICY_MAX] = { + [DCCPQ_POLICY_SIMPLE] = { + .push = qpolicy_simple_push, + .full = qpolicy_simple_full, + .top = qpolicy_simple_top, + }, + [DCCPQ_POLICY_PRIO] = { + .push = qpolicy_simple_push, + .full = qpolicy_prio_full, + .top = qpolicy_prio_best_skb, + }, +}; + +/* + * Externally visible interface + */ +void dccp_qpolicy_push(struct sock *sk, struct sk_buff *skb) +{ + qpol_table[dccp_sk(sk)->dccps_qpolicy].push(sk, skb); +} + +bool dccp_qpolicy_full(struct sock *sk) +{ + return qpol_table[dccp_sk(sk)->dccps_qpolicy].full(sk); +} + +void dccp_qpolicy_drop(struct sock *sk, struct sk_buff *skb) +{ + if (skb != NULL) { + skb_unlink(skb, &sk->sk_write_queue); + kfree_skb(skb); + } +} + +struct sk_buff *dccp_qpolicy_top(struct sock *sk) +{ + return qpol_table[dccp_sk(sk)->dccps_qpolicy].top(sk); +} + +struct sk_buff *dccp_qpolicy_pop(struct sock *sk) +{ + struct sk_buff *skb = dccp_qpolicy_top(sk); + + /* Clear any skb fields that we used internally */ + skb->priority = 0; + + if (skb) + skb_unlink(skb, &sk->sk_write_queue); + return skb; +} -- cgit v1.2.3-70-g09d2 From 90f31e382b9bb4313327ab504874385654b501fe Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Mon, 1 Sep 2008 14:03:50 +0200 Subject: ALSA: Documentation/sound/alsa/ALSA-Configuration.txt: fix typo As noted by Gu Rui in http://bugzilla.kernel.org/show_bug.cgi?id=11444, there is a typo in Documentation/sound/alsa/ALSA-Configuration.txt. After checking the source (sound/pci/hda/hda_intel.c), the report looks correct to me. Signed-off-by: Michael Kerrisk Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index fd3de679386..30499cf77d5 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1098,7 +1098,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. register value without FIFO size correction as the current DMA pointer. position_fix=2 will make the driver to use the position buffer instead of reading SD_LPIB register. - (Usually SD_LPLIB register is more accurate than the + (Usually SD_LPIB register is more accurate than the position buffer.) NB: If you get many "azx_get_response timeout" messages at -- cgit v1.2.3-70-g09d2 From 5394f80f92642c61fc2a95385be85f2fdcfb5adb Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sun, 7 Sep 2008 01:51:32 -0700 Subject: x86: check for and defend against BIOS memory corruption Some BIOSes have been observed to corrupt memory in the low 64k. This change: - Reserves all memory which does not have to be in that area, to prevent it from being used as general memory by the kernel. Things like the SMP trampoline are still in the memory, however. - Clears the reserved memory so we can observe changes to it. - Adds a function check_for_bios_corruption() which checks and reports on memory becoming unexpectedly non-zero. Currently it's called in the x86 fault handler, and the powermanagement debug output. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 5 +++ arch/x86/Kconfig | 3 ++ arch/x86/kernel/setup.c | 87 +++++++++++++++++++++++++++++++++++++ arch/x86/mm/fault.c | 2 + drivers/base/power/main.c | 1 + include/linux/kernel.h | 12 +++++ 6 files changed, 110 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1150444a21a..df48af505d1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -360,6 +360,11 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,, See header of drivers/net/hamradio/baycom_ser_hdx.c. + bios_corruption_check=0/1 [X86] + Some BIOSes seem to corrupt the first 64k of memory + when doing things like suspend/resume. Setting this + option will scan the memory looking for corruption. + boot_delay= Milliseconds to delay each printk during boot. Values larger than 10 seconds (10000) are changed to no delay (0). diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ed92864d132..1bb52e2ca02 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -201,6 +201,9 @@ config X86_TRAMPOLINE depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP) default y +config X86_CHECK_BIOS_CORRUPTION + def_bool y + config KTIME_SCALAR def_bool X86_32 source "init/Kconfig" diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 362d4e7f2d3..ee89ebc5aab 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -578,6 +578,89 @@ static struct x86_quirks default_x86_quirks __initdata; struct x86_quirks *x86_quirks __initdata = &default_x86_quirks; +/* + * Some BIOSes seem to corrupt the low 64k of memory during events + * like suspend/resume and unplugging an HDMI cable. Reserve all + * remaining free memory in that area and fill it with a distinct + * pattern. + */ +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION +#define MAX_SCAN_AREAS 8 +static struct e820entry scan_areas[MAX_SCAN_AREAS]; +static int num_scan_areas; + +static void __init setup_bios_corruption_check(void) +{ + u64 addr = PAGE_SIZE; /* assume first page is reserved anyway */ + + while(addr < 0x10000 && num_scan_areas < MAX_SCAN_AREAS) { + u64 size; + addr = find_e820_area_size(addr, &size, PAGE_SIZE); + + if (addr == 0) + break; + + if ((addr + size) > 0x10000) + size = 0x10000 - addr; + + if (size == 0) + break; + + e820_update_range(addr, size, E820_RAM, E820_RESERVED); + scan_areas[num_scan_areas].addr = addr; + scan_areas[num_scan_areas].size = size; + num_scan_areas++; + + /* Assume we've already mapped this early memory */ + memset(__va(addr), 0, size); + + addr += size; + } + + printk(KERN_INFO "scanning %d areas for BIOS corruption\n", + num_scan_areas); + update_e820(); +} + +static int __read_mostly bios_corruption_check = 1; + +void check_for_bios_corruption(void) +{ + int i; + int corruption = 0; + + if (!bios_corruption_check) + return; + + for(i = 0; i < num_scan_areas; i++) { + unsigned long *addr = __va(scan_areas[i].addr); + unsigned long size = scan_areas[i].size; + + for(; size; addr++, size -= sizeof(unsigned long)) { + if (!*addr) + continue; + printk(KERN_ERR "Corrupted low memory at %p (%lx phys) = %08lx\n", + addr, __pa(addr), *addr); + corruption = 1; + *addr = 0; + } + } + + if (corruption) + dump_stack(); +} + +static int set_bios_corruption_check(char *arg) +{ + char *end; + + bios_corruption_check = simple_strtol(arg, &end, 10); + + return (*end == 0) ? 0 : -EINVAL; +} +early_param("bios_corruption_check", set_bios_corruption_check); +#endif + /* * Determine if we were loaded by an EFI loader. If so, then we have also been * passed the efi memmap, systab, etc., so we should use these data structures @@ -750,6 +833,10 @@ void __init setup_arch(char **cmdline_p) high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; #endif +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION + setup_bios_corruption_check(); +#endif + /* max_pfn_mapped is updated here */ max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn< Date: Sun, 7 Sep 2008 01:51:34 -0700 Subject: x86: clean up memory corruption check and add more kernel parameters The corruption check is enabled in Kconfig by default, but disabled at runtime. This patch adds several kernel parameters to control the corruption check's behaviour; these are documented in kernel-parameters.txt. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 28 ++++++++++--- arch/x86/Kconfig | 26 ++++++++++-- arch/x86/kernel/setup.c | 80 +++++++++++++++++++++++++++---------- 3 files changed, 106 insertions(+), 28 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index df48af505d1..6a2629d0059 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -360,11 +360,6 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,, See header of drivers/net/hamradio/baycom_ser_hdx.c. - bios_corruption_check=0/1 [X86] - Some BIOSes seem to corrupt the first 64k of memory - when doing things like suspend/resume. Setting this - option will scan the memory looking for corruption. - boot_delay= Milliseconds to delay each printk during boot. Values larger than 10 seconds (10000) are changed to no delay (0). @@ -1233,6 +1228,29 @@ and is between 256 and 4096 characters. It is defined in the file or memmap=0x10000$0x18690000 + memory_corruption_check=0/1 [X86] + Some BIOSes seem to corrupt the first 64k of + memory when doing things like suspend/resume. + Setting this option will scan the memory + looking for corruption. Enabling this will + both detect corruption and prevent the kernel + from using the memory being corrupted. + However, its intended as a diagnostic tool; if + repeatable BIOS-originated corruption always + affects the same memory, you can use memmap= + to prevent the kernel from using that memory. + + memory_corruption_check_size=size [X86] + By default it checks for corruption in the low + 64k, making this memory unavailable for normal + use. Use this parameter to scan for + corruption in more or less memory. + + memory_corruption_check_period=seconds [X86] + By default it checks for corruption every 60 + seconds. Use this parameter to check at some + other rate. 0 disables periodic checking. + memtest= [KNL,X86] Enable memtest Format: range: 0,4 : pattern number diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 1bb52e2ca02..cbee4199689 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -201,9 +201,6 @@ config X86_TRAMPOLINE depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP) default y -config X86_CHECK_BIOS_CORRUPTION - def_bool y - config KTIME_SCALAR def_bool X86_32 source "init/Kconfig" @@ -1062,6 +1059,29 @@ config HIGHPTE low memory. Setting this option will put user-space page table entries in high memory. +config X86_CHECK_BIOS_CORRUPTION + bool "Check for low memory corruption" + default y + help + Periodically check for memory corruption in low memory, which + is suspected to be caused by BIOS. Even when enabled in the + configuration, it is disabled at runtime. Enable it by + setting "memory_corruption_check=1" on the kernel command + line. By default it scans the low 64k of memory every 60 + seconds; see the memory_corruption_check_size and + memory_corruption_check_period parameters in + Documentation/kernel-parameters.txt to adjust this. + + When enabled with the default parameters, this option has + almost no overhead, as it reserves a relatively small amount + of memory and scans it infrequently. It both detects corruption + and prevents it from affecting the running system. + + It is, however, intended as a diagnostic tool; if repeatable + BIOS-originated corruption always affects the same memory, + you can use memmap= to prevent the kernel from using that + memory. + config MATH_EMULATION bool prompt "Math emulation" if X86_32 diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index c239b378097..27ae9128885 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -586,22 +586,71 @@ struct x86_quirks *x86_quirks __initdata = &default_x86_quirks; */ #ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION #define MAX_SCAN_AREAS 8 + +static int __read_mostly memory_corruption_check = 0; +static unsigned __read_mostly corruption_check_size = 64*1024; +static unsigned __read_mostly corruption_check_period = 60; /* seconds */ + static struct e820entry scan_areas[MAX_SCAN_AREAS]; static int num_scan_areas; + +static int set_corruption_check(char *arg) +{ + char *end; + + memory_corruption_check = simple_strtol(arg, &end, 10); + + return (*end == 0) ? 0 : -EINVAL; +} +early_param("memory_corruption_check", set_corruption_check); + +static int set_corruption_check_period(char *arg) +{ + char *end; + + corruption_check_period = simple_strtoul(arg, &end, 10); + + return (*end == 0) ? 0 : -EINVAL; +} +early_param("memory_corruption_check_period", set_corruption_check_period); + +static int set_corruption_check_size(char *arg) +{ + char *end; + unsigned size; + + size = memparse(arg, &end); + + if (*end == '\0') + corruption_check_size = size; + + return (size == corruption_check_size) ? 0 : -EINVAL; +} +early_param("memory_corruption_check_size", set_corruption_check_size); + + static void __init setup_bios_corruption_check(void) { u64 addr = PAGE_SIZE; /* assume first page is reserved anyway */ - while(addr < 0x10000 && num_scan_areas < MAX_SCAN_AREAS) { + if (corruption_check_size == 0) + memory_corruption_check = 0; + + if (!memory_corruption_check) + return; + + corruption_check_size = round_up(corruption_check_size, PAGE_SIZE); + + while(addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) { u64 size; addr = find_e820_area_size(addr, &size, PAGE_SIZE); if (addr == 0) break; - if ((addr + size) > 0x10000) - size = 0x10000 - addr; + if ((addr + size) > corruption_check_size) + size = corruption_check_size - addr; if (size == 0) break; @@ -617,12 +666,11 @@ static void __init setup_bios_corruption_check(void) addr += size; } - printk(KERN_INFO "scanning %d areas for BIOS corruption\n", + printk(KERN_INFO "Scanning %d areas for low memory corruption\n", num_scan_areas); update_e820(); } -static int __read_mostly bios_corruption_check = 1; static struct timer_list periodic_check_timer; void check_for_bios_corruption(void) @@ -630,7 +678,7 @@ void check_for_bios_corruption(void) int i; int corruption = 0; - if (!bios_corruption_check) + if (!memory_corruption_check) return; for(i = 0; i < num_scan_areas; i++) { @@ -647,35 +695,27 @@ void check_for_bios_corruption(void) } } - if (corruption) - dump_stack(); + WARN(corruption, KERN_ERR "Memory corruption detected in low memory\n"); } static void periodic_check_for_corruption(unsigned long data) { check_for_bios_corruption(); - mod_timer(&periodic_check_timer, jiffies + 60*HZ); + mod_timer(&periodic_check_timer, jiffies + corruption_check_period*HZ); } void start_periodic_check_for_corruption(void) { - if (!bios_corruption_check) + if (!memory_corruption_check || corruption_check_period == 0) return; + printk(KERN_INFO "Scanning for low memory corruption every %d seconds\n", + corruption_check_period); + init_timer(&periodic_check_timer); periodic_check_timer.function = &periodic_check_for_corruption; periodic_check_for_corruption(0); } - -static int set_bios_corruption_check(char *arg) -{ - char *end; - - bios_corruption_check = simple_strtol(arg, &end, 10); - - return (*end == 0) ? 0 : -EINVAL; -} -early_param("bios_corruption_check", set_bios_corruption_check); #endif /* -- cgit v1.2.3-70-g09d2 From 410e27a49bb98bc7fa3ff5fc05cc313817b9f253 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Tue, 9 Sep 2008 13:27:22 +0200 Subject: This reverts "Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/dccp_exp" as it accentally contained the wrong set of patches. These will be submitted separately. Signed-off-by: Gerrit Renker --- Documentation/networking/dccp.txt | 54 +- include/linux/dccp.h | 122 ++- include/net/tcp.h | 15 - net/dccp/Kconfig | 3 + net/dccp/Makefile | 5 +- net/dccp/ackvec.c | 619 ++++++------ net/dccp/ackvec.h | 204 ++-- net/dccp/ccid.c | 101 +- net/dccp/ccid.h | 113 +-- net/dccp/ccids/Kconfig | 30 +- net/dccp/ccids/ccid2.c | 622 +++++++----- net/dccp/ccids/ccid2.h | 63 +- net/dccp/ccids/ccid3.c | 762 +++++++++------ net/dccp/ccids/ccid3.h | 153 +-- net/dccp/ccids/lib/loss_interval.c | 30 +- net/dccp/ccids/lib/loss_interval.h | 4 +- net/dccp/ccids/lib/packet_history.c | 282 +++--- net/dccp/ccids/lib/packet_history.h | 78 +- net/dccp/ccids/lib/tfrc.h | 16 - net/dccp/ccids/lib/tfrc_equation.c | 29 +- net/dccp/dccp.h | 104 +- net/dccp/diag.c | 2 +- net/dccp/feat.c | 1805 +++++++++-------------------------- net/dccp/feat.h | 144 +-- net/dccp/input.c | 164 ++-- net/dccp/ipv4.c | 4 +- net/dccp/ipv6.c | 4 +- net/dccp/minisocks.c | 87 +- net/dccp/options.c | 341 ++++--- net/dccp/output.c | 279 ++---- net/dccp/probe.c | 75 +- net/dccp/proto.c | 281 ++---- net/dccp/qpolicy.c | 137 --- net/dccp/sysctl.c | 64 +- net/dccp/timer.c | 42 +- net/ipv4/tcp_input.c | 17 +- 36 files changed, 2884 insertions(+), 3971 deletions(-) delete mode 100644 net/dccp/qpolicy.c (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index fcfc1253442..39131a3c78f 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -45,25 +45,6 @@ http://linux-net.osdl.org/index.php/DCCP_Testing#Experimental_DCCP_source_tree Socket options ============== -DCCP_SOCKOPT_QPOLICY_ID sets the dequeuing policy for outgoing packets. It takes -a policy ID as argument and can only be set before the connection (i.e. changes -during an established connection are not supported). Currently, two policies are -defined: the "simple" policy (DCCPQ_POLICY_SIMPLE), which does nothing special, -and a priority-based variant (DCCPQ_POLICY_PRIO). The latter allows to pass an -u32 priority value as ancillary data to sendmsg(), where higher numbers indicate -a higher packet priority (similar to SO_PRIORITY). This ancillary data needs to -be formatted using a cmsg(3) message header filled in as follows: - cmsg->cmsg_level = SOL_DCCP; - cmsg->cmsg_type = DCCP_SCM_PRIORITY; - cmsg->cmsg_len = CMSG_LEN(sizeof(uint32_t)); /* or CMSG_LEN(4) */ - -DCCP_SOCKOPT_QPOLICY_TXQLEN sets the maximum length of the output queue. A zero -value is always interpreted as unbounded queue length. If different from zero, -the interpretation of this parameter depends on the current dequeuing policy -(see above): the "simple" policy will enforce a fixed queue size by returning -EAGAIN, whereas the "prio" policy enforces a fixed queue length by dropping the -lowest-priority packet first. The default value for this parameter is -initialised from /proc/sys/net/dccp/default/tx_qlen. DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of service codes (RFC 4340, sec. 8.1.2); if this socket option is not set, @@ -76,24 +57,6 @@ can be set before calling bind(). DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet size (application payload size) in bytes, see RFC 4340, section 14. -DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs -supported by the endpoint (see include/linux/dccp.h for symbolic constants). -The caller needs to provide a sufficiently large (> 2) array of type uint8_t. - -DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same -time, combining the operation of the next two socket options. This option is -preferrable over the latter two, since often applications will use the same -type of CCID for both directions; and mixed use of CCIDs is not currently well -understood. This socket option takes as argument at least one uint8_t value, or -an array of uint8_t values, which must match available CCIDS (see above). CCIDs -must be registered on the socket before calling connect() or listen(). - -DCCP_SOCKOPT_TX_CCID is read/write. It returns the current CCID (if set) or sets -the preference list for the TX CCID, using the same format as DCCP_SOCKOPT_CCID. -Please note that the getsockopt argument type here is `int', not uint8_t. - -DCCP_SOCKOPT_RX_CCID is analogous to DCCP_SOCKOPT_TX_CCID, but for the RX CCID. - DCCP_SOCKOPT_SERVER_TIMEWAIT enables the server (listening socket) to hold timewait state when closing the connection (RFC 4340, 8.3). The usual case is that the closing server sends a CloseReq, whereupon the client holds timewait @@ -152,16 +115,23 @@ retries2 importance for retransmitted acknowledgments and feature negotiation, data packets are never retransmitted. Analogue of tcp_retries2. +send_ndp = 1 + Whether or not to send NDP count options (sec. 7.7.2). + +send_ackvec = 1 + Whether or not to send Ack Vector options (sec. 11.5). + +ack_ratio = 2 + The default Ack Ratio (sec. 11.3) to use. + tx_ccid = 2 - Default CCID for the sender-receiver half-connection. Depending on the - choice of CCID, the Send Ack Vector feature is enabled automatically. + Default CCID for the sender-receiver half-connection. rx_ccid = 2 - Default CCID for the receiver-sender half-connection; see tx_ccid. + Default CCID for the receiver-sender half-connection. seq_window = 100 - The initial sequence window (sec. 7.5.2) of the sender. This influences - the local ackno validity and the remote seqno validity windows (7.5.1). + The initial sequence window (sec. 7.5.2). tx_qlen = 5 The size of the transmit buffer in packets. A value of 0 corresponds diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 010e2d87ed7..6080449fbec 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -165,13 +165,9 @@ enum { DCCPO_TIMESTAMP_ECHO = 42, DCCPO_ELAPSED_TIME = 43, DCCPO_MAX = 45, - DCCPO_MIN_RX_CCID_SPECIFIC = 128, /* from sender to receiver */ - DCCPO_MAX_RX_CCID_SPECIFIC = 191, - DCCPO_MIN_TX_CCID_SPECIFIC = 192, /* from receiver to sender */ - DCCPO_MAX_TX_CCID_SPECIFIC = 255, + DCCPO_MIN_CCID_SPECIFIC = 128, + DCCPO_MAX_CCID_SPECIFIC = 255, }; -/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */ -#define DCCP_SINGLE_OPT_MAXLEN 253 /* DCCP CCIDS */ enum { @@ -180,36 +176,27 @@ enum { }; /* DCCP features (RFC 4340 section 6.4) */ -enum dccp_feature_numbers { +enum { DCCPF_RESERVED = 0, DCCPF_CCID = 1, - DCCPF_SHORT_SEQNOS = 2, + DCCPF_SHORT_SEQNOS = 2, /* XXX: not yet implemented */ DCCPF_SEQUENCE_WINDOW = 3, - DCCPF_ECN_INCAPABLE = 4, + DCCPF_ECN_INCAPABLE = 4, /* XXX: not yet implemented */ DCCPF_ACK_RATIO = 5, DCCPF_SEND_ACK_VECTOR = 6, DCCPF_SEND_NDP_COUNT = 7, DCCPF_MIN_CSUM_COVER = 8, - DCCPF_DATA_CHECKSUM = 9, + DCCPF_DATA_CHECKSUM = 9, /* XXX: not yet implemented */ /* 10-127 reserved */ DCCPF_MIN_CCID_SPECIFIC = 128, - DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */ DCCPF_MAX_CCID_SPECIFIC = 255, }; -/* DCCP socket control message types for cmsg */ -enum dccp_cmsg_type { - DCCP_SCM_PRIORITY = 1, - DCCP_SCM_QPOLICY_MAX = 0xFFFF, - /* ^-- Up to here reserved exclusively for qpolicy parameters */ - DCCP_SCM_MAX -}; - -/* DCCP priorities for outgoing/queued packets */ -enum dccp_packet_dequeueing_policy { - DCCPQ_POLICY_SIMPLE, - DCCPQ_POLICY_PRIO, - DCCPQ_POLICY_MAX +/* this structure is argument to DCCP_SOCKOPT_CHANGE_X */ +struct dccp_so_feat { + __u8 dccpsf_feat; + __u8 __user *dccpsf_val; + __u8 dccpsf_len; }; /* DCCP socket options */ @@ -221,12 +208,6 @@ enum dccp_packet_dequeueing_policy { #define DCCP_SOCKOPT_SERVER_TIMEWAIT 6 #define DCCP_SOCKOPT_SEND_CSCOV 10 #define DCCP_SOCKOPT_RECV_CSCOV 11 -#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 -#define DCCP_SOCKOPT_CCID 13 -#define DCCP_SOCKOPT_TX_CCID 14 -#define DCCP_SOCKOPT_RX_CCID 15 -#define DCCP_SOCKOPT_QPOLICY_ID 16 -#define DCCP_SOCKOPT_QPOLICY_TXQLEN 17 #define DCCP_SOCKOPT_CCID_RX_INFO 128 #define DCCP_SOCKOPT_CCID_TX_INFO 192 @@ -374,13 +355,62 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) return __dccp_hdr_len(dccp_hdr(skb)); } + +/* initial values for each feature */ +#define DCCPF_INITIAL_SEQUENCE_WINDOW 100 +#define DCCPF_INITIAL_ACK_RATIO 2 +#define DCCPF_INITIAL_CCID DCCPC_CCID2 +#define DCCPF_INITIAL_SEND_ACK_VECTOR 1 +/* FIXME: for now we're default to 1 but it should really be 0 */ +#define DCCPF_INITIAL_SEND_NDP_COUNT 1 + +/** + * struct dccp_minisock - Minimal DCCP connection representation + * + * Will be used to pass the state from dccp_request_sock to dccp_sock. + * + * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) + * @dccpms_ccid - Congestion Control Id (CCID) (section 10) + * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) + * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) + * @dccpms_ack_ratio - Ack Ratio Feature (section 11.3) + * @dccpms_pending - List of features being negotiated + * @dccpms_conf - + */ +struct dccp_minisock { + __u64 dccpms_sequence_window; + __u8 dccpms_rx_ccid; + __u8 dccpms_tx_ccid; + __u8 dccpms_send_ack_vector; + __u8 dccpms_send_ndp_count; + __u8 dccpms_ack_ratio; + struct list_head dccpms_pending; + struct list_head dccpms_conf; +}; + +struct dccp_opt_conf { + __u8 *dccpoc_val; + __u8 dccpoc_len; +}; + +struct dccp_opt_pend { + struct list_head dccpop_node; + __u8 dccpop_type; + __u8 dccpop_feat; + __u8 *dccpop_val; + __u8 dccpop_len; + int dccpop_conf; + struct dccp_opt_conf *dccpop_sc; +}; + +extern void dccp_minisock_init(struct dccp_minisock *dmsk); + /** * struct dccp_request_sock - represent DCCP-specific connection request * @dreq_inet_rsk: structure inherited from * @dreq_iss: initial sequence number sent on the Response (RFC 4340, 7.1) * @dreq_isr: initial sequence number received on the Request * @dreq_service: service code present on the Request (there is just one) - * @dreq_featneg: feature negotiation options for this connection * The following two fields are analogous to the ones in dccp_sock: * @dreq_timestamp_echo: last received timestamp to echo (13.1) * @dreq_timestamp_echo: the time of receiving the last @dreq_timestamp_echo @@ -390,7 +420,6 @@ struct dccp_request_sock { __u64 dreq_iss; __u64 dreq_isr; __be32 dreq_service; - struct list_head dreq_featneg; __u32 dreq_timestamp_echo; __u32 dreq_timestamp_time; }; @@ -462,28 +491,21 @@ struct dccp_ackvec; * @dccps_timestamp_time - time of receiving latest @dccps_timestamp_echo * @dccps_l_ack_ratio - feature-local Ack Ratio * @dccps_r_ack_ratio - feature-remote Ack Ratio - * @dccps_l_seq_win - local Sequence Window (influences ack number validity) - * @dccps_r_seq_win - remote Sequence Window (influences seq number validity) * @dccps_pcslen - sender partial checksum coverage (via sockopt) * @dccps_pcrlen - receiver partial checksum coverage (via sockopt) - * @dccps_send_ndp_count - local Send NDP Count feature (7.7.2) * @dccps_ndp_count - number of Non Data Packets since last data packet * @dccps_mss_cache - current value of MSS (path MTU minus header sizes) * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4) - * @dccps_featneg - tracks feature-negotiation state (mostly during handshake) + * @dccps_minisock - associated minisock (accessed via dccp_msk) * @dccps_hc_rx_ackvec - rx half connection ack vector * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection) * @dccps_hc_tx_ccid - CCID used for the sender (or sending half-connection) * @dccps_options_received - parsed set of retrieved options - * @dccps_qpolicy - TX dequeueing policy, one of %dccp_packet_dequeueing_policy - * @dccps_tx_qlen - maximum length of the TX queue * @dccps_role - role of this sock, one of %dccp_role * @dccps_hc_rx_insert_options - receiver wants to add options when acking * @dccps_hc_tx_insert_options - sender wants to add options when sending * @dccps_server_timewait - server holds timewait state on close (RFC 4340, 8.3) - * @dccps_sync_scheduled - flag which signals "send out-of-band message soon" - * @dccps_xmitlet - tasklet scheduled by the TX CCID to dequeue data packets - * @dccps_xmit_timer - used by the TX CCID to delay sending (rate-based pacing) + * @dccps_xmit_timer - timer for when CCID is not ready to send * @dccps_syn_rtt - RTT sample from Request/Response exchange (in usecs) */ struct dccp_sock { @@ -507,26 +529,19 @@ struct dccp_sock { __u32 dccps_timestamp_time; __u16 dccps_l_ack_ratio; __u16 dccps_r_ack_ratio; - __u64 dccps_l_seq_win:48; - __u64 dccps_r_seq_win:48; - __u8 dccps_pcslen:4; - __u8 dccps_pcrlen:4; - __u8 dccps_send_ndp_count:1; + __u16 dccps_pcslen; + __u16 dccps_pcrlen; __u64 dccps_ndp_count:48; unsigned long dccps_rate_last; - struct list_head dccps_featneg; + struct dccp_minisock dccps_minisock; struct dccp_ackvec *dccps_hc_rx_ackvec; struct ccid *dccps_hc_rx_ccid; struct ccid *dccps_hc_tx_ccid; struct dccp_options_received dccps_options_received; - __u8 dccps_qpolicy; - __u32 dccps_tx_qlen; enum dccp_role dccps_role:2; __u8 dccps_hc_rx_insert_options:1; __u8 dccps_hc_tx_insert_options:1; __u8 dccps_server_timewait:1; - __u8 dccps_sync_scheduled:1; - struct tasklet_struct dccps_xmitlet; struct timer_list dccps_xmit_timer; }; @@ -535,6 +550,11 @@ static inline struct dccp_sock *dccp_sk(const struct sock *sk) return (struct dccp_sock *)sk; } +static inline struct dccp_minisock *dccp_msk(const struct sock *sk) +{ + return (struct dccp_minisock *)&dccp_sk(sk)->dccps_minisock; +} + static inline const char *dccp_role(const struct sock *sk) { switch (dccp_sk(sk)->dccps_role) { diff --git a/include/net/tcp.h b/include/net/tcp.h index 6bc4b8148ca..8983386356a 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -782,21 +782,6 @@ static inline __u32 tcp_current_ssthresh(const struct sock *sk) /* Use define here intentionally to get WARN_ON location shown at the caller */ #define tcp_verify_left_out(tp) WARN_ON(tcp_left_out(tp) > tp->packets_out) -/* - * Convert RFC3390 larger initial windows into an equivalent number of packets. - * - * John Heffner states: - * - * The RFC specifies a window of no more than 4380 bytes - * unless 2*MSS > 4380. Reading the pseudocode in the RFC - * is a bit misleading because they use a clamp at 4380 bytes - * rather than a multiplier in the relevant range. - */ -static inline u32 rfc3390_bytes_to_packets(const u32 bytes) -{ - return bytes <= 1095 ? 4 : (bytes > 1460 ? 2 : 3); -} - extern void tcp_enter_cwr(struct sock *sk, const int set_ssthresh); extern __u32 tcp_init_cwnd(struct tcp_sock *tp, struct dst_entry *dst); diff --git a/net/dccp/Kconfig b/net/dccp/Kconfig index 206c16ad9c3..7aa2a7acc7e 100644 --- a/net/dccp/Kconfig +++ b/net/dccp/Kconfig @@ -25,6 +25,9 @@ config INET_DCCP_DIAG def_tristate y if (IP_DCCP = y && INET_DIAG = y) def_tristate m +config IP_DCCP_ACKVEC + bool + source "net/dccp/ccids/Kconfig" menu "DCCP Kernel Hacking" diff --git a/net/dccp/Makefile b/net/dccp/Makefile index 0c1c9af2bf7..f4f8793aaff 100644 --- a/net/dccp/Makefile +++ b/net/dccp/Makefile @@ -1,7 +1,6 @@ obj-$(CONFIG_IP_DCCP) += dccp.o dccp_ipv4.o -dccp-y := ccid.o feat.o input.o minisocks.o options.o \ - qpolicy.o output.o proto.o timer.o ackvec.o +dccp-y := ccid.o feat.o input.o minisocks.o options.o output.o proto.o timer.o dccp_ipv4-y := ipv4.o @@ -9,6 +8,8 @@ dccp_ipv4-y := ipv4.o obj-$(subst y,$(CONFIG_IP_DCCP),$(CONFIG_IPV6)) += dccp_ipv6.o dccp_ipv6-y := ipv6.o +dccp-$(CONFIG_IP_DCCP_ACKVEC) += ackvec.o + obj-$(CONFIG_INET_DCCP_DIAG) += dccp_diag.o obj-$(CONFIG_NET_DCCPPROBE) += dccp_probe.o diff --git a/net/dccp/ackvec.c b/net/dccp/ackvec.c index 41819848bdd..1e8be246ad1 100644 --- a/net/dccp/ackvec.c +++ b/net/dccp/ackvec.c @@ -1,375 +1,445 @@ /* * net/dccp/ackvec.c * - * An implementation of Ack Vectors for the DCCP protocol - * Copyright (c) 2007 University of Aberdeen, Scotland, UK + * An implementation of the DCCP protocol * Copyright (c) 2005 Arnaldo Carvalho de Melo * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; version 2 of the License; */ + +#include "ackvec.h" #include "dccp.h" + +#include +#include +#include #include +#include #include +#include + static struct kmem_cache *dccp_ackvec_slab; static struct kmem_cache *dccp_ackvec_record_slab; -struct dccp_ackvec *dccp_ackvec_alloc(const gfp_t priority) +static struct dccp_ackvec_record *dccp_ackvec_record_new(void) { - struct dccp_ackvec *av = kmem_cache_zalloc(dccp_ackvec_slab, priority); + struct dccp_ackvec_record *avr = + kmem_cache_alloc(dccp_ackvec_record_slab, GFP_ATOMIC); - if (av != NULL) { - av->av_buf_head = av->av_buf_tail = DCCPAV_MAX_ACKVEC_LEN - 1; - INIT_LIST_HEAD(&av->av_records); - } - return av; + if (avr != NULL) + INIT_LIST_HEAD(&avr->avr_node); + + return avr; } -static void dccp_ackvec_purge_records(struct dccp_ackvec *av) +static void dccp_ackvec_record_delete(struct dccp_ackvec_record *avr) { - struct dccp_ackvec_record *cur, *next; - - list_for_each_entry_safe(cur, next, &av->av_records, avr_node) - kmem_cache_free(dccp_ackvec_record_slab, cur); - INIT_LIST_HEAD(&av->av_records); + if (unlikely(avr == NULL)) + return; + /* Check if deleting a linked record */ + WARN_ON(!list_empty(&avr->avr_node)); + kmem_cache_free(dccp_ackvec_record_slab, avr); } -void dccp_ackvec_free(struct dccp_ackvec *av) +static void dccp_ackvec_insert_avr(struct dccp_ackvec *av, + struct dccp_ackvec_record *avr) { - if (likely(av != NULL)) { - dccp_ackvec_purge_records(av); - kmem_cache_free(dccp_ackvec_slab, av); + /* + * AVRs are sorted by seqno. Since we are sending them in order, we + * just add the AVR at the head of the list. + * -sorbo. + */ + if (!list_empty(&av->av_records)) { + const struct dccp_ackvec_record *head = + list_entry(av->av_records.next, + struct dccp_ackvec_record, + avr_node); + BUG_ON(before48(avr->avr_ack_seqno, head->avr_ack_seqno)); } + + list_add(&avr->avr_node, &av->av_records); } -/** - * dccp_ackvec_update_records - Record information about sent Ack Vectors - * @av: Ack Vector records to update - * @seqno: Sequence number of the packet carrying the Ack Vector just sent - * @nonce_sum: The sum of all buffer nonces contained in the Ack Vector - */ -int dccp_ackvec_update_records(struct dccp_ackvec *av, u64 seqno, u8 nonce_sum) +int dccp_insert_option_ackvec(struct sock *sk, struct sk_buff *skb) { + struct dccp_sock *dp = dccp_sk(sk); + struct dccp_ackvec *av = dp->dccps_hc_rx_ackvec; + /* Figure out how many options do we need to represent the ackvec */ + const u16 nr_opts = DIV_ROUND_UP(av->av_vec_len, DCCP_MAX_ACKVEC_OPT_LEN); + u16 len = av->av_vec_len + 2 * nr_opts, i; + u32 elapsed_time; + const unsigned char *tail, *from; + unsigned char *to; struct dccp_ackvec_record *avr; + suseconds_t delta; + + if (DCCP_SKB_CB(skb)->dccpd_opt_len + len > DCCP_MAX_OPT_LEN) + return -1; + + delta = ktime_us_delta(ktime_get_real(), av->av_time); + elapsed_time = delta / 10; - avr = kmem_cache_alloc(dccp_ackvec_record_slab, GFP_ATOMIC); + if (elapsed_time != 0 && + dccp_insert_option_elapsed_time(sk, skb, elapsed_time)) + return -1; + + avr = dccp_ackvec_record_new(); if (avr == NULL) - return -ENOBUFS; + return -1; + + DCCP_SKB_CB(skb)->dccpd_opt_len += len; + + to = skb_push(skb, len); + len = av->av_vec_len; + from = av->av_buf + av->av_buf_head; + tail = av->av_buf + DCCP_MAX_ACKVEC_LEN; + + for (i = 0; i < nr_opts; ++i) { + int copylen = len; + + if (len > DCCP_MAX_ACKVEC_OPT_LEN) + copylen = DCCP_MAX_ACKVEC_OPT_LEN; + + *to++ = DCCPO_ACK_VECTOR_0; + *to++ = copylen + 2; + + /* Check if buf_head wraps */ + if (from + copylen > tail) { + const u16 tailsize = tail - from; + + memcpy(to, from, tailsize); + to += tailsize; + len -= tailsize; + copylen -= tailsize; + from = av->av_buf; + } + + memcpy(to, from, copylen); + from += copylen; + to += copylen; + len -= copylen; + } - avr->avr_ack_seqno = seqno; - avr->avr_ack_ptr = av->av_buf_head; - avr->avr_ack_ackno = av->av_buf_ackno; - avr->avr_ack_nonce = nonce_sum; - avr->avr_ack_runlen = dccp_ackvec_runlen(av->av_buf + av->av_buf_head); - /* - * When the buffer overflows, we keep no more than one record. This is - * the simplest way of disambiguating sender-Acks dating from before the - * overflow from sender-Acks which refer to after the overflow; a simple - * solution is preferable here since we are handling an exception. - */ - if (av->av_overflow) - dccp_ackvec_purge_records(av); /* - * Since GSS is incremented for each packet, the list is automatically - * arranged in descending order of @ack_seqno. + * From RFC 4340, A.2: + * + * For each acknowledgement it sends, the HC-Receiver will add an + * acknowledgement record. ack_seqno will equal the HC-Receiver + * sequence number it used for the ack packet; ack_ptr will equal + * buf_head; ack_ackno will equal buf_ackno; and ack_nonce will + * equal buf_nonce. */ - list_add(&avr->avr_node, &av->av_records); + avr->avr_ack_seqno = DCCP_SKB_CB(skb)->dccpd_seq; + avr->avr_ack_ptr = av->av_buf_head; + avr->avr_ack_ackno = av->av_buf_ackno; + avr->avr_ack_nonce = av->av_buf_nonce; + avr->avr_sent_len = av->av_vec_len; - dccp_pr_debug("Added Vector, ack_seqno=%llu, ack_ackno=%llu (rl=%u)\n", + dccp_ackvec_insert_avr(av, avr); + + dccp_pr_debug("%s ACK Vector 0, len=%d, ack_seqno=%llu, " + "ack_ackno=%llu\n", + dccp_role(sk), avr->avr_sent_len, (unsigned long long)avr->avr_ack_seqno, - (unsigned long long)avr->avr_ack_ackno, - avr->avr_ack_runlen); + (unsigned long long)avr->avr_ack_ackno); return 0; } -static struct dccp_ackvec_record *dccp_ackvec_lookup(struct list_head *av_list, - const u64 ackno) +struct dccp_ackvec *dccp_ackvec_alloc(const gfp_t priority) { - struct dccp_ackvec_record *avr; - /* - * Exploit that records are inserted in descending order of sequence - * number, start with the oldest record first. If @ackno is `before' - * the earliest ack_ackno, the packet is too old to be considered. - */ - list_for_each_entry_reverse(avr, av_list, avr_node) { - if (avr->avr_ack_seqno == ackno) - return avr; - if (before48(ackno, avr->avr_ack_seqno)) - break; + struct dccp_ackvec *av = kmem_cache_alloc(dccp_ackvec_slab, priority); + + if (av != NULL) { + av->av_buf_head = DCCP_MAX_ACKVEC_LEN - 1; + av->av_buf_ackno = UINT48_MAX + 1; + av->av_buf_nonce = 0; + av->av_time = ktime_set(0, 0); + av->av_vec_len = 0; + INIT_LIST_HEAD(&av->av_records); } - return NULL; + + return av; } -/* - * Buffer index and length computation using modulo-buffersize arithmetic. - * Note that, as pointers move from right to left, head is `before' tail. - */ -static inline u16 __ackvec_idx_add(const u16 a, const u16 b) +void dccp_ackvec_free(struct dccp_ackvec *av) { - return (a + b) % DCCPAV_MAX_ACKVEC_LEN; + if (unlikely(av == NULL)) + return; + + if (!list_empty(&av->av_records)) { + struct dccp_ackvec_record *avr, *next; + + list_for_each_entry_safe(avr, next, &av->av_records, avr_node) { + list_del_init(&avr->avr_node); + dccp_ackvec_record_delete(avr); + } + } + + kmem_cache_free(dccp_ackvec_slab, av); } -static inline u16 __ackvec_idx_sub(const u16 a, const u16 b) +static inline u8 dccp_ackvec_state(const struct dccp_ackvec *av, + const u32 index) { - return __ackvec_idx_add(a, DCCPAV_MAX_ACKVEC_LEN - b); + return av->av_buf[index] & DCCP_ACKVEC_STATE_MASK; } -u16 dccp_ackvec_buflen(const struct dccp_ackvec *av) +static inline u8 dccp_ackvec_len(const struct dccp_ackvec *av, + const u32 index) { - if (unlikely(av->av_overflow)) - return DCCPAV_MAX_ACKVEC_LEN; - return __ackvec_idx_sub(av->av_buf_tail, av->av_buf_head); + return av->av_buf[index] & DCCP_ACKVEC_LEN_MASK; } -/** - * dccp_ackvec_update_old - Update previous state as per RFC 4340, 11.4.1 - * @av: non-empty buffer to update - * @distance: negative or zero distance of @seqno from buf_ackno downward - * @seqno: the (old) sequence number whose record is to be updated - * @state: state in which packet carrying @seqno was received +/* + * If several packets are missing, the HC-Receiver may prefer to enter multiple + * bytes with run length 0, rather than a single byte with a larger run length; + * this simplifies table updates if one of the missing packets arrives. */ -static void dccp_ackvec_update_old(struct dccp_ackvec *av, s64 distance, - u64 seqno, enum dccp_ackvec_states state) +static inline int dccp_ackvec_set_buf_head_state(struct dccp_ackvec *av, + const unsigned int packets, + const unsigned char state) { - u16 ptr = av->av_buf_head; + unsigned int gap; + long new_head; - BUG_ON(distance > 0); - if (unlikely(dccp_ackvec_is_empty(av))) - return; + if (av->av_vec_len + packets > DCCP_MAX_ACKVEC_LEN) + return -ENOBUFS; - do { - u8 runlen = dccp_ackvec_runlen(av->av_buf + ptr); + gap = packets - 1; + new_head = av->av_buf_head - packets; - if (distance + runlen >= 0) { - /* - * Only update the state if packet has not been received - * yet. This is OK as per the second table in RFC 4340, - * 11.4.1; i.e. here we are using the following table: - * RECEIVED - * 0 1 3 - * S +---+---+---+ - * T 0 | 0 | 0 | 0 | - * O +---+---+---+ - * R 1 | 1 | 1 | 1 | - * E +---+---+---+ - * D 3 | 0 | 1 | 3 | - * +---+---+---+ - * The "Not Received" state was set by reserve_seats(). - */ - if (av->av_buf[ptr] == DCCPAV_NOT_RECEIVED) - av->av_buf[ptr] = state; - else - dccp_pr_debug("Not changing %llu state to %u\n", - (unsigned long long)seqno, state); - break; + if (new_head < 0) { + if (gap > 0) { + memset(av->av_buf, DCCP_ACKVEC_STATE_NOT_RECEIVED, + gap + new_head + 1); + gap = -new_head; } + new_head += DCCP_MAX_ACKVEC_LEN; + } - distance += runlen + 1; - ptr = __ackvec_idx_add(ptr, 1); + av->av_buf_head = new_head; - } while (ptr != av->av_buf_tail); -} + if (gap > 0) + memset(av->av_buf + av->av_buf_head + 1, + DCCP_ACKVEC_STATE_NOT_RECEIVED, gap); -/* Mark @num entries after buf_head as "Not yet received". */ -static void dccp_ackvec_reserve_seats(struct dccp_ackvec *av, u16 num) -{ - u16 start = __ackvec_idx_add(av->av_buf_head, 1), - len = DCCPAV_MAX_ACKVEC_LEN - start; - - /* check for buffer wrap-around */ - if (num > len) { - memset(av->av_buf + start, DCCPAV_NOT_RECEIVED, len); - start = 0; - num -= len; - } - if (num) - memset(av->av_buf + start, DCCPAV_NOT_RECEIVED, num); + av->av_buf[av->av_buf_head] = state; + av->av_vec_len += packets; + return 0; } -/** - * dccp_ackvec_add_new - Record one or more new entries in Ack Vector buffer - * @av: container of buffer to update (can be empty or non-empty) - * @num_packets: number of packets to register (must be >= 1) - * @seqno: sequence number of the first packet in @num_packets - * @state: state in which packet carrying @seqno was received +/* + * Implements the RFC 4340, Appendix A */ -static void dccp_ackvec_add_new(struct dccp_ackvec *av, u32 num_packets, - u64 seqno, enum dccp_ackvec_states state) +int dccp_ackvec_add(struct dccp_ackvec *av, const struct sock *sk, + const u64 ackno, const u8 state) { - u32 num_cells = num_packets; + /* + * Check at the right places if the buffer is full, if it is, tell the + * caller to start dropping packets till the HC-Sender acks our ACK + * vectors, when we will free up space in av_buf. + * + * We may well decide to do buffer compression, etc, but for now lets + * just drop. + * + * From Appendix A.1.1 (`New Packets'): + * + * Of course, the circular buffer may overflow, either when the + * HC-Sender is sending data at a very high rate, when the + * HC-Receiver's acknowledgements are not reaching the HC-Sender, + * or when the HC-Sender is forgetting to acknowledge those acks + * (so the HC-Receiver is unable to clean up old state). In this + * case, the HC-Receiver should either compress the buffer (by + * increasing run lengths when possible), transfer its state to + * a larger buffer, or, as a last resort, drop all received + * packets, without processing them whatsoever, until its buffer + * shrinks again. + */ - if (num_packets > DCCPAV_BURST_THRESH) { - u32 lost_packets = num_packets - 1; + /* See if this is the first ackno being inserted */ + if (av->av_vec_len == 0) { + av->av_buf[av->av_buf_head] = state; + av->av_vec_len = 1; + } else if (after48(ackno, av->av_buf_ackno)) { + const u64 delta = dccp_delta_seqno(av->av_buf_ackno, ackno); - DCCP_WARN("Warning: large burst loss (%u)\n", lost_packets); /* - * We received 1 packet and have a loss of size "num_packets-1" - * which we squeeze into num_cells-1 rather than reserving an - * entire byte for each lost packet. - * The reason is that the vector grows in O(burst_length); when - * it grows too large there will no room left for the payload. - * This is a trade-off: if a few packets out of the burst show - * up later, their state will not be changed; it is simply too - * costly to reshuffle/reallocate/copy the buffer each time. - * Should such problems persist, we will need to switch to a - * different underlying data structure. + * Look if the state of this packet is the same as the + * previous ackno and if so if we can bump the head len. */ - for (num_packets = num_cells = 1; lost_packets; ++num_cells) { - u8 len = min(lost_packets, (u32)DCCPAV_MAX_RUNLEN); - - av->av_buf_head = __ackvec_idx_sub(av->av_buf_head, 1); - av->av_buf[av->av_buf_head] = DCCPAV_NOT_RECEIVED | len; + if (delta == 1 && + dccp_ackvec_state(av, av->av_buf_head) == state && + dccp_ackvec_len(av, av->av_buf_head) < DCCP_ACKVEC_LEN_MASK) + av->av_buf[av->av_buf_head]++; + else if (dccp_ackvec_set_buf_head_state(av, delta, state)) + return -ENOBUFS; + } else { + /* + * A.1.2. Old Packets + * + * When a packet with Sequence Number S <= buf_ackno + * arrives, the HC-Receiver will scan the table for + * the byte corresponding to S. (Indexing structures + * could reduce the complexity of this scan.) + */ + u64 delta = dccp_delta_seqno(ackno, av->av_buf_ackno); + u32 index = av->av_buf_head; - lost_packets -= len; + while (1) { + const u8 len = dccp_ackvec_len(av, index); + const u8 av_state = dccp_ackvec_state(av, index); + /* + * valid packets not yet in av_buf have a reserved + * entry, with a len equal to 0. + */ + if (av_state == DCCP_ACKVEC_STATE_NOT_RECEIVED && + len == 0 && delta == 0) { /* Found our + reserved seat! */ + dccp_pr_debug("Found %llu reserved seat!\n", + (unsigned long long)ackno); + av->av_buf[index] = state; + goto out; + } + /* len == 0 means one packet */ + if (delta < len + 1) + goto out_duplicate; + + delta -= len + 1; + if (++index == DCCP_MAX_ACKVEC_LEN) + index = 0; } } - if (num_cells + dccp_ackvec_buflen(av) >= DCCPAV_MAX_ACKVEC_LEN) { - DCCP_CRIT("Ack Vector buffer overflow: dropping old entries\n"); - av->av_overflow = true; - } - - av->av_buf_head = __ackvec_idx_sub(av->av_buf_head, num_packets); - if (av->av_overflow) - av->av_buf_tail = av->av_buf_head; - - av->av_buf[av->av_buf_head] = state; - av->av_buf_ackno = seqno; + av->av_buf_ackno = ackno; + av->av_time = ktime_get_real(); +out: + return 0; - if (num_packets > 1) - dccp_ackvec_reserve_seats(av, num_packets - 1); +out_duplicate: + /* Duplicate packet */ + dccp_pr_debug("Received a dup or already considered lost " + "packet: %llu\n", (unsigned long long)ackno); + return -EILSEQ; } -/** - * dccp_ackvec_input - Register incoming packet in the buffer - */ -void dccp_ackvec_input(struct dccp_ackvec *av, struct sk_buff *skb) +static void dccp_ackvec_throw_record(struct dccp_ackvec *av, + struct dccp_ackvec_record *avr) { - u64 seqno = DCCP_SKB_CB(skb)->dccpd_seq; - enum dccp_ackvec_states state = DCCPAV_RECEIVED; + struct dccp_ackvec_record *next; - if (dccp_ackvec_is_empty(av)) { - dccp_ackvec_add_new(av, 1, seqno, state); - av->av_tail_ackno = seqno; + /* sort out vector length */ + if (av->av_buf_head <= avr->avr_ack_ptr) + av->av_vec_len = avr->avr_ack_ptr - av->av_buf_head; + else + av->av_vec_len = DCCP_MAX_ACKVEC_LEN - 1 - + av->av_buf_head + avr->avr_ack_ptr; - } else { - s64 num_packets = dccp_delta_seqno(av->av_buf_ackno, seqno); - u8 *current_head = av->av_buf + av->av_buf_head; - - if (num_packets == 1 && - dccp_ackvec_state(current_head) == state && - dccp_ackvec_runlen(current_head) < DCCPAV_MAX_RUNLEN) { + /* free records */ + list_for_each_entry_safe_from(avr, next, &av->av_records, avr_node) { + list_del_init(&avr->avr_node); + dccp_ackvec_record_delete(avr); + } +} - *current_head += 1; - av->av_buf_ackno = seqno; +void dccp_ackvec_check_rcv_ackno(struct dccp_ackvec *av, struct sock *sk, + const u64 ackno) +{ + struct dccp_ackvec_record *avr; - } else if (num_packets > 0) { - dccp_ackvec_add_new(av, num_packets, seqno, state); - } else { - dccp_ackvec_update_old(av, num_packets, seqno, state); - } + /* + * If we traverse backwards, it should be faster when we have large + * windows. We will be receiving ACKs for stuff we sent a while back + * -sorbo. + */ + list_for_each_entry_reverse(avr, &av->av_records, avr_node) { + if (ackno == avr->avr_ack_seqno) { + dccp_pr_debug("%s ACK packet 0, len=%d, ack_seqno=%llu, " + "ack_ackno=%llu, ACKED!\n", + dccp_role(sk), 1, + (unsigned long long)avr->avr_ack_seqno, + (unsigned long long)avr->avr_ack_ackno); + dccp_ackvec_throw_record(av, avr); + break; + } else if (avr->avr_ack_seqno > ackno) + break; /* old news */ } } -/** - * dccp_ackvec_clear_state - Perform house-keeping / garbage-collection - * This routine is called when the peer acknowledges the receipt of Ack Vectors - * up to and including @ackno. While based on on section A.3 of RFC 4340, here - * are additional precautions to prevent corrupted buffer state. In particular, - * we use tail_ackno to identify outdated records; it always marks the earliest - * packet of group (2) in 11.4.2. - */ -void dccp_ackvec_clear_state(struct dccp_ackvec *av, const u64 ackno) - { - struct dccp_ackvec_record *avr, *next; - u8 runlen_now, eff_runlen; - s64 delta; +static void dccp_ackvec_check_rcv_ackvector(struct dccp_ackvec *av, + struct sock *sk, u64 *ackno, + const unsigned char len, + const unsigned char *vector) +{ + unsigned char i; + struct dccp_ackvec_record *avr; - avr = dccp_ackvec_lookup(&av->av_records, ackno); - if (avr == NULL) + /* Check if we actually sent an ACK vector */ + if (list_empty(&av->av_records)) return; - /* - * Deal with outdated acknowledgments: this arises when e.g. there are - * several old records and the acks from the peer come in slowly. In - * that case we may still have records that pre-date tail_ackno. - */ - delta = dccp_delta_seqno(av->av_tail_ackno, avr->avr_ack_ackno); - if (delta < 0) - goto free_records; - /* - * Deal with overlapping Ack Vectors: don't subtract more than the - * number of packets between tail_ackno and ack_ackno. - */ - eff_runlen = delta < avr->avr_ack_runlen ? delta : avr->avr_ack_runlen; - runlen_now = dccp_ackvec_runlen(av->av_buf + avr->avr_ack_ptr); + i = len; /* - * The run length of Ack Vector cells does not decrease over time. If - * the run length is the same as at the time the Ack Vector was sent, we - * free the ack_ptr cell. That cell can however not be freed if the run - * length has increased: in this case we need to move the tail pointer - * backwards (towards higher indices), to its next-oldest neighbour. + * XXX + * I think it might be more efficient to work backwards. See comment on + * rcv_ackno. -sorbo. */ - if (runlen_now > eff_runlen) { + avr = list_entry(av->av_records.next, struct dccp_ackvec_record, avr_node); + while (i--) { + const u8 rl = *vector & DCCP_ACKVEC_LEN_MASK; + u64 ackno_end_rl; - av->av_buf[avr->avr_ack_ptr] -= eff_runlen + 1; - av->av_buf_tail = __ackvec_idx_add(avr->avr_ack_ptr, 1); + dccp_set_seqno(&ackno_end_rl, *ackno - rl); - /* This move may not have cleared the overflow flag. */ - if (av->av_overflow) - av->av_overflow = (av->av_buf_head == av->av_buf_tail); - } else { - av->av_buf_tail = avr->avr_ack_ptr; /* - * We have made sure that avr points to a valid cell within the - * buffer. This cell is either older than head, or equals head - * (empty buffer): in both cases we no longer have any overflow. + * If our AVR sequence number is greater than the ack, go + * forward in the AVR list until it is not so. */ - av->av_overflow = 0; - } - - /* - * The peer has acknowledged up to and including ack_ackno. Hence the - * first packet in group (2) of 11.4.2 is the successor of ack_ackno. - */ - av->av_tail_ackno = ADD48(avr->avr_ack_ackno, 1); + list_for_each_entry_from(avr, &av->av_records, avr_node) { + if (!after48(avr->avr_ack_seqno, *ackno)) + goto found; + } + /* End of the av_records list, not found, exit */ + break; +found: + if (between48(avr->avr_ack_seqno, ackno_end_rl, *ackno)) { + const u8 state = *vector & DCCP_ACKVEC_STATE_MASK; + if (state != DCCP_ACKVEC_STATE_NOT_RECEIVED) { + dccp_pr_debug("%s ACK vector 0, len=%d, " + "ack_seqno=%llu, ack_ackno=%llu, " + "ACKED!\n", + dccp_role(sk), len, + (unsigned long long) + avr->avr_ack_seqno, + (unsigned long long) + avr->avr_ack_ackno); + dccp_ackvec_throw_record(av, avr); + break; + } + /* + * If it wasn't received, continue scanning... we might + * find another one. + */ + } -free_records: - list_for_each_entry_safe_from(avr, next, &av->av_records, avr_node) { - list_del(&avr->avr_node); - kmem_cache_free(dccp_ackvec_record_slab, avr); + dccp_set_seqno(ackno, ackno_end_rl - 1); + ++vector; } } -/* - * Routines to keep track of Ack Vectors received in an skb - */ -int dccp_ackvec_parsed_add(struct list_head *head, u8 *vec, u8 len, u8 nonce) +int dccp_ackvec_parse(struct sock *sk, const struct sk_buff *skb, + u64 *ackno, const u8 opt, const u8 *value, const u8 len) { - struct dccp_ackvec_parsed *new = kmalloc(sizeof(*new), GFP_ATOMIC); - - if (new == NULL) - return -ENOBUFS; - new->vec = vec; - new->len = len; - new->nonce = nonce; + if (len > DCCP_MAX_ACKVEC_OPT_LEN) + return -1; - list_add_tail(&new->node, head); + /* dccp_ackvector_print(DCCP_SKB_CB(skb)->dccpd_ack_seq, value, len); */ + dccp_ackvec_check_rcv_ackvector(dccp_sk(sk)->dccps_hc_rx_ackvec, sk, + ackno, len, value); return 0; } -EXPORT_SYMBOL_GPL(dccp_ackvec_parsed_add); - -void dccp_ackvec_parsed_cleanup(struct list_head *parsed_chunks) -{ - struct dccp_ackvec_parsed *cur, *next; - - list_for_each_entry_safe(cur, next, parsed_chunks, node) - kfree(cur); - INIT_LIST_HEAD(parsed_chunks); -} -EXPORT_SYMBOL_GPL(dccp_ackvec_parsed_cleanup); int __init dccp_ackvec_init(void) { @@ -379,9 +449,10 @@ int __init dccp_ackvec_init(void) if (dccp_ackvec_slab == NULL) goto out_err; - dccp_ackvec_record_slab = kmem_cache_create("dccp_ackvec_record", - sizeof(struct dccp_ackvec_record), - 0, SLAB_HWCACHE_ALIGN, NULL); + dccp_ackvec_record_slab = + kmem_cache_create("dccp_ackvec_record", + sizeof(struct dccp_ackvec_record), + 0, SLAB_HWCACHE_ALIGN, NULL); if (dccp_ackvec_record_slab == NULL) goto out_destroy_slab; diff --git a/net/dccp/ackvec.h b/net/dccp/ackvec.h index 6cdca79a99f..bcb64fb4ace 100644 --- a/net/dccp/ackvec.h +++ b/net/dccp/ackvec.h @@ -3,134 +3,156 @@ /* * net/dccp/ackvec.h * - * An implementation of Ack Vectors for the DCCP protocol - * Copyright (c) 2007 University of Aberdeen, Scotland, UK + * An implementation of the DCCP protocol * Copyright (c) 2005 Arnaldo Carvalho de Melo + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include #include +#include #include #include -/* - * Ack Vector buffer space is static, in multiples of %DCCP_SINGLE_OPT_MAXLEN, - * the maximum size of a single Ack Vector. Setting %DCCPAV_NUM_ACKVECS to 1 - * will be sufficient for most cases of low Ack Ratios, using a value of 2 gives - * more headroom if Ack Ratio is higher or when the sender acknowledges slowly. - * The maximum value is bounded by the u16 types for indices and functions. - */ -#define DCCPAV_NUM_ACKVECS 2 -#define DCCPAV_MAX_ACKVEC_LEN (DCCP_SINGLE_OPT_MAXLEN * DCCPAV_NUM_ACKVECS) - -/* Estimated minimum average Ack Vector length - used for updating MPS */ -#define DCCPAV_MIN_OPTLEN 16 - -/* Threshold for coping with large bursts of losses */ -#define DCCPAV_BURST_THRESH (DCCPAV_MAX_ACKVEC_LEN / 8) - -enum dccp_ackvec_states { - DCCPAV_RECEIVED = 0x00, - DCCPAV_ECN_MARKED = 0x40, - DCCPAV_RESERVED = 0x80, - DCCPAV_NOT_RECEIVED = 0xC0 -}; -#define DCCPAV_MAX_RUNLEN 0x3F +/* Read about the ECN nonce to see why it is 253 */ +#define DCCP_MAX_ACKVEC_OPT_LEN 253 +/* We can spread an ack vector across multiple options */ +#define DCCP_MAX_ACKVEC_LEN (DCCP_MAX_ACKVEC_OPT_LEN * 2) -static inline u8 dccp_ackvec_runlen(const u8 *cell) -{ - return *cell & DCCPAV_MAX_RUNLEN; -} +#define DCCP_ACKVEC_STATE_RECEIVED 0 +#define DCCP_ACKVEC_STATE_ECN_MARKED (1 << 6) +#define DCCP_ACKVEC_STATE_NOT_RECEIVED (3 << 6) -static inline u8 dccp_ackvec_state(const u8 *cell) -{ - return *cell & ~DCCPAV_MAX_RUNLEN; -} +#define DCCP_ACKVEC_STATE_MASK 0xC0 /* 11000000 */ +#define DCCP_ACKVEC_LEN_MASK 0x3F /* 00111111 */ -/** struct dccp_ackvec - Ack Vector main data structure +/** struct dccp_ackvec - ack vector + * + * This data structure is the one defined in RFC 4340, Appendix A. * - * This implements a fixed-size circular buffer within an array and is largely - * based on Appendix A of RFC 4340. + * @av_buf_head - circular buffer head + * @av_buf_tail - circular buffer tail + * @av_buf_ackno - ack # of the most recent packet acknowledgeable in the + * buffer (i.e. %av_buf_head) + * @av_buf_nonce - the one-bit sum of the ECN Nonces on all packets acked + * by the buffer with State 0 * - * @av_buf: circular buffer storage area - * @av_buf_head: head index; begin of live portion in @av_buf - * @av_buf_tail: tail index; first index _after_ the live portion in @av_buf - * @av_buf_ackno: highest seqno of acknowledgeable packet recorded in @av_buf - * @av_tail_ackno: lowest seqno of acknowledgeable packet recorded in @av_buf - * @av_buf_nonce: ECN nonce sums, each covering subsequent segments of up to - * %DCCP_SINGLE_OPT_MAXLEN cells in the live portion of @av_buf - * @av_overflow: if 1 then buf_head == buf_tail indicates buffer wraparound - * @av_records: list of %dccp_ackvec_record (Ack Vectors sent previously) + * Additionally, the HC-Receiver must keep some information about the + * Ack Vectors it has recently sent. For each packet sent carrying an + * Ack Vector, it remembers four variables: + * + * @av_records - list of dccp_ackvec_record + * @av_ack_nonce - the one-bit sum of the ECN Nonces for all State 0. + * + * @av_time - the time in usecs + * @av_buf - circular buffer of acknowledgeable packets */ struct dccp_ackvec { - u8 av_buf[DCCPAV_MAX_ACKVEC_LEN]; - u16 av_buf_head; - u16 av_buf_tail; - u64 av_buf_ackno:48; - u64 av_tail_ackno:48; - bool av_buf_nonce[DCCPAV_NUM_ACKVECS]; - u8 av_overflow:1; + u64 av_buf_ackno; struct list_head av_records; + ktime_t av_time; + u16 av_buf_head; + u16 av_vec_len; + u8 av_buf_nonce; + u8 av_ack_nonce; + u8 av_buf[DCCP_MAX_ACKVEC_LEN]; }; -/** struct dccp_ackvec_record - Records information about sent Ack Vectors +/** struct dccp_ackvec_record - ack vector record * - * These list entries define the additional information which the HC-Receiver - * keeps about recently-sent Ack Vectors; again refer to RFC 4340, Appendix A. + * ACK vector record as defined in Appendix A of spec. * - * @avr_node: the list node in @av_records - * @avr_ack_seqno: sequence number of the packet the Ack Vector was sent on - * @avr_ack_ackno: the Ack number that this record/Ack Vector refers to - * @avr_ack_ptr: pointer into @av_buf where this record starts - * @avr_ack_runlen: run length of @avr_ack_ptr at the time of sending - * @avr_ack_nonce: the sum of @av_buf_nonce's at the time this record was sent + * The list is sorted by avr_ack_seqno * - * The list as a whole is sorted in descending order by @avr_ack_seqno. + * @avr_node - node in av_records + * @avr_ack_seqno - sequence number of the packet this record was sent on + * @avr_ack_ackno - sequence number being acknowledged + * @avr_ack_ptr - pointer into av_buf where this record starts + * @avr_ack_nonce - av_ack_nonce at the time this record was sent + * @avr_sent_len - lenght of the record in av_buf */ struct dccp_ackvec_record { struct list_head avr_node; - u64 avr_ack_seqno:48; - u64 avr_ack_ackno:48; + u64 avr_ack_seqno; + u64 avr_ack_ackno; u16 avr_ack_ptr; - u8 avr_ack_runlen; - u8 avr_ack_nonce:1; + u16 avr_sent_len; + u8 avr_ack_nonce; }; -extern int dccp_ackvec_init(void); +struct sock; +struct sk_buff; + +#ifdef CONFIG_IP_DCCP_ACKVEC +extern int dccp_ackvec_init(void); extern void dccp_ackvec_exit(void); extern struct dccp_ackvec *dccp_ackvec_alloc(const gfp_t priority); extern void dccp_ackvec_free(struct dccp_ackvec *av); -extern void dccp_ackvec_input(struct dccp_ackvec *av, struct sk_buff *skb); -extern int dccp_ackvec_update_records(struct dccp_ackvec *av, u64 seq, u8 sum); -extern void dccp_ackvec_clear_state(struct dccp_ackvec *av, const u64 ackno); -extern u16 dccp_ackvec_buflen(const struct dccp_ackvec *av); +extern int dccp_ackvec_add(struct dccp_ackvec *av, const struct sock *sk, + const u64 ackno, const u8 state); + +extern void dccp_ackvec_check_rcv_ackno(struct dccp_ackvec *av, + struct sock *sk, const u64 ackno); +extern int dccp_ackvec_parse(struct sock *sk, const struct sk_buff *skb, + u64 *ackno, const u8 opt, + const u8 *value, const u8 len); -static inline bool dccp_ackvec_is_empty(const struct dccp_ackvec *av) +extern int dccp_insert_option_ackvec(struct sock *sk, struct sk_buff *skb); + +static inline int dccp_ackvec_pending(const struct dccp_ackvec *av) +{ + return av->av_vec_len; +} +#else /* CONFIG_IP_DCCP_ACKVEC */ +static inline int dccp_ackvec_init(void) { - return av->av_overflow == 0 && av->av_buf_head == av->av_buf_tail; + return 0; } -/** - * struct dccp_ackvec_parsed - Record offsets of Ack Vectors in skb - * @vec: start of vector (offset into skb) - * @len: length of @vec - * @nonce: whether @vec had an ECN nonce of 0 or 1 - * @node: FIFO - arranged in descending order of ack_ackno - * This structure is used by CCIDs to access Ack Vectors in a received skb. - */ -struct dccp_ackvec_parsed { - u8 *vec, - len, - nonce:1; - struct list_head node; -}; +static inline void dccp_ackvec_exit(void) +{ +} + +static inline struct dccp_ackvec *dccp_ackvec_alloc(const gfp_t priority) +{ + return NULL; +} + +static inline void dccp_ackvec_free(struct dccp_ackvec *av) +{ +} + +static inline int dccp_ackvec_add(struct dccp_ackvec *av, const struct sock *sk, + const u64 ackno, const u8 state) +{ + return -1; +} -extern int dccp_ackvec_parsed_add(struct list_head *head, - u8 *vec, u8 len, u8 nonce); -extern void dccp_ackvec_parsed_cleanup(struct list_head *parsed_chunks); +static inline void dccp_ackvec_check_rcv_ackno(struct dccp_ackvec *av, + struct sock *sk, const u64 ackno) +{ +} + +static inline int dccp_ackvec_parse(struct sock *sk, const struct sk_buff *skb, + const u64 *ackno, const u8 opt, + const u8 *value, const u8 len) +{ + return -1; +} + +static inline int dccp_insert_option_ackvec(const struct sock *sk, + const struct sk_buff *skb) +{ + return -1; +} + +static inline int dccp_ackvec_pending(const struct dccp_ackvec *av) +{ + return 0; +} +#endif /* CONFIG_IP_DCCP_ACKVEC */ #endif /* _ACKVEC_H */ diff --git a/net/dccp/ccid.c b/net/dccp/ccid.c index e3fb52b4f5c..4809753d12a 100644 --- a/net/dccp/ccid.c +++ b/net/dccp/ccid.c @@ -13,13 +13,6 @@ #include "ccid.h" -static u8 builtin_ccids[] = { - DCCPC_CCID2, /* CCID2 is supported by default */ -#if defined(CONFIG_IP_DCCP_CCID3) || defined(CONFIG_IP_DCCP_CCID3_MODULE) - DCCPC_CCID3, -#endif -}; - static struct ccid_operations *ccids[CCID_MAX]; #if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT) static atomic_t ccids_lockct = ATOMIC_INIT(0); @@ -93,47 +86,6 @@ static void ccid_kmem_cache_destroy(struct kmem_cache *slab) } } -/* check that up to @array_len members in @ccid_array are supported */ -bool ccid_support_check(u8 const *ccid_array, u8 array_len) -{ - u8 i, j, found; - - for (i = 0, found = 0; i < array_len; i++, found = 0) { - for (j = 0; !found && j < ARRAY_SIZE(builtin_ccids); j++) - found = (ccid_array[i] == builtin_ccids[j]); - if (!found) - return false; - } - return true; -} - -/** - * ccid_get_builtin_ccids - Provide copy of `builtin' CCID array - * @ccid_array: pointer to copy into - * @array_len: value to return length into - * This function allocates memory - caller must see that it is freed after use. - */ -int ccid_get_builtin_ccids(u8 **ccid_array, u8 *array_len) -{ - *ccid_array = kmemdup(builtin_ccids, sizeof(builtin_ccids), gfp_any()); - if (*ccid_array == NULL) - return -ENOBUFS; - *array_len = ARRAY_SIZE(builtin_ccids); - return 0; -} - -int ccid_getsockopt_builtin_ccids(struct sock *sk, int len, - char __user *optval, int __user *optlen) -{ - if (len < sizeof(builtin_ccids)) - return -EINVAL; - - if (put_user(sizeof(builtin_ccids), optlen) || - copy_to_user(optval, builtin_ccids, sizeof(builtin_ccids))) - return -EFAULT; - return 0; -} - int ccid_register(struct ccid_operations *ccid_ops) { int err = -ENOBUFS; @@ -196,41 +148,22 @@ int ccid_unregister(struct ccid_operations *ccid_ops) EXPORT_SYMBOL_GPL(ccid_unregister); -/** - * ccid_request_module - Pre-load CCID module for later use - * This should be called only from process context (e.g. during connection - * setup) and is necessary for later calls to ccid_new (typically in software - * interrupt), so that it has the modules available when they are needed. - */ -static int ccid_request_module(u8 id) -{ - if (!in_atomic()) { - ccids_read_lock(); - if (ccids[id] == NULL) { - ccids_read_unlock(); - return request_module("net-dccp-ccid-%d", id); - } - ccids_read_unlock(); - } - return 0; -} - -int ccid_request_modules(u8 const *ccid_array, u8 array_len) -{ -#ifdef CONFIG_KMOD - while (array_len--) - if (ccid_request_module(ccid_array[array_len])) - return -1; -#endif - return 0; -} - struct ccid *ccid_new(unsigned char id, struct sock *sk, int rx, gfp_t gfp) { struct ccid_operations *ccid_ops; struct ccid *ccid = NULL; ccids_read_lock(); +#ifdef CONFIG_KMOD + if (ccids[id] == NULL) { + /* We only try to load if in process context */ + ccids_read_unlock(); + if (gfp & GFP_ATOMIC) + goto out; + request_module("net-dccp-ccid-%d", id); + ccids_read_lock(); + } +#endif ccid_ops = ccids[id]; if (ccid_ops == NULL) goto out_unlock; @@ -272,6 +205,20 @@ out_module_put: EXPORT_SYMBOL_GPL(ccid_new); +struct ccid *ccid_hc_rx_new(unsigned char id, struct sock *sk, gfp_t gfp) +{ + return ccid_new(id, sk, 1, gfp); +} + +EXPORT_SYMBOL_GPL(ccid_hc_rx_new); + +struct ccid *ccid_hc_tx_new(unsigned char id,struct sock *sk, gfp_t gfp) +{ + return ccid_new(id, sk, 0, gfp); +} + +EXPORT_SYMBOL_GPL(ccid_hc_tx_new); + static void ccid_delete(struct ccid *ccid, struct sock *sk, int rx) { struct ccid_operations *ccid_ops; diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h index d27054ba215..fdeae7b5731 100644 --- a/net/dccp/ccid.h +++ b/net/dccp/ccid.h @@ -60,18 +60,22 @@ struct ccid_operations { void (*ccid_hc_tx_exit)(struct sock *sk); void (*ccid_hc_rx_packet_recv)(struct sock *sk, struct sk_buff *skb); - int (*ccid_hc_rx_parse_options)(struct sock *sk, u8 pkt, - u8 opt, u8 *val, u8 len); + int (*ccid_hc_rx_parse_options)(struct sock *sk, + unsigned char option, + unsigned char len, u16 idx, + unsigned char* value); int (*ccid_hc_rx_insert_options)(struct sock *sk, struct sk_buff *skb); void (*ccid_hc_tx_packet_recv)(struct sock *sk, struct sk_buff *skb); - int (*ccid_hc_tx_parse_options)(struct sock *sk, u8 pkt, - u8 opt, u8 *val, u8 len); + int (*ccid_hc_tx_parse_options)(struct sock *sk, + unsigned char option, + unsigned char len, u16 idx, + unsigned char* value); int (*ccid_hc_tx_send_packet)(struct sock *sk, struct sk_buff *skb); void (*ccid_hc_tx_packet_sent)(struct sock *sk, - unsigned int len); + int more, unsigned int len); void (*ccid_hc_rx_get_info)(struct sock *sk, struct tcp_info *info); void (*ccid_hc_tx_get_info)(struct sock *sk, @@ -99,78 +103,31 @@ static inline void *ccid_priv(const struct ccid *ccid) return (void *)ccid->ccid_priv; } -extern bool ccid_support_check(u8 const *ccid_array, u8 array_len); -extern int ccid_get_builtin_ccids(u8 **ccid_array, u8 *array_len); -extern int ccid_getsockopt_builtin_ccids(struct sock *sk, int len, - char __user *, int __user *); - -extern int ccid_request_modules(u8 const *ccid_array, u8 array_len); extern struct ccid *ccid_new(unsigned char id, struct sock *sk, int rx, gfp_t gfp); -static inline int ccid_get_current_rx_ccid(struct dccp_sock *dp) -{ - struct ccid *ccid = dp->dccps_hc_rx_ccid; - - if (ccid == NULL || ccid->ccid_ops == NULL) - return -1; - return ccid->ccid_ops->ccid_id; -} - -static inline int ccid_get_current_tx_ccid(struct dccp_sock *dp) -{ - struct ccid *ccid = dp->dccps_hc_tx_ccid; - - if (ccid == NULL || ccid->ccid_ops == NULL) - return -1; - return ccid->ccid_ops->ccid_id; -} +extern struct ccid *ccid_hc_rx_new(unsigned char id, struct sock *sk, + gfp_t gfp); +extern struct ccid *ccid_hc_tx_new(unsigned char id, struct sock *sk, + gfp_t gfp); extern void ccid_hc_rx_delete(struct ccid *ccid, struct sock *sk); extern void ccid_hc_tx_delete(struct ccid *ccid, struct sock *sk); -/* - * Congestion control of queued data packets via CCID decision. - * - * The TX CCID performs its congestion-control by indicating whether and when a - * queued packet may be sent, using the return code of ccid_hc_tx_send_packet(). - * The following modes are supported via the symbolic constants below: - * - timer-based pacing (CCID returns a delay value in milliseconds); - * - autonomous dequeueing (CCID internally schedules dccps_xmitlet). - */ - -enum ccid_dequeueing_decision { - CCID_PACKET_SEND_AT_ONCE = 0x00000, /* "green light": no delay */ - CCID_PACKET_DELAY_MAX = 0x0FFFF, /* maximum delay in msecs */ - CCID_PACKET_DELAY = 0x10000, /* CCID msec-delay mode */ - CCID_PACKET_WILL_DEQUEUE_LATER = 0x20000, /* CCID autonomous mode */ - CCID_PACKET_ERR = 0xF0000, /* error condition */ -}; - -static inline int ccid_packet_dequeue_eval(const int return_code) -{ - if (return_code < 0) - return CCID_PACKET_ERR; - if (return_code == 0) - return CCID_PACKET_SEND_AT_ONCE; - if (return_code <= CCID_PACKET_DELAY_MAX) - return CCID_PACKET_DELAY; - return return_code; -} - static inline int ccid_hc_tx_send_packet(struct ccid *ccid, struct sock *sk, struct sk_buff *skb) { + int rc = 0; if (ccid->ccid_ops->ccid_hc_tx_send_packet != NULL) - return ccid->ccid_ops->ccid_hc_tx_send_packet(sk, skb); - return CCID_PACKET_SEND_AT_ONCE; + rc = ccid->ccid_ops->ccid_hc_tx_send_packet(sk, skb); + return rc; } static inline void ccid_hc_tx_packet_sent(struct ccid *ccid, struct sock *sk, - unsigned int len) + int more, unsigned int len) { if (ccid->ccid_ops->ccid_hc_tx_packet_sent != NULL) - ccid->ccid_ops->ccid_hc_tx_packet_sent(sk, len); + ccid->ccid_ops->ccid_hc_tx_packet_sent(sk, more, len); } static inline void ccid_hc_rx_packet_recv(struct ccid *ccid, struct sock *sk, @@ -187,31 +144,27 @@ static inline void ccid_hc_tx_packet_recv(struct ccid *ccid, struct sock *sk, ccid->ccid_ops->ccid_hc_tx_packet_recv(sk, skb); } -/** - * ccid_hc_tx_parse_options - Parse CCID-specific options sent by the receiver - * @pkt: type of packet that @opt appears on (RFC 4340, 5.1) - * @opt: the CCID-specific option type (RFC 4340, 5.8 and 10.3) - * @val: value of @opt - * @len: length of @val in bytes - */ static inline int ccid_hc_tx_parse_options(struct ccid *ccid, struct sock *sk, - u8 pkt, u8 opt, u8 *val, u8 len) + unsigned char option, + unsigned char len, u16 idx, + unsigned char* value) { - if (ccid->ccid_ops->ccid_hc_tx_parse_options == NULL) - return 0; - return ccid->ccid_ops->ccid_hc_tx_parse_options(sk, pkt, opt, val, len); + int rc = 0; + if (ccid->ccid_ops->ccid_hc_tx_parse_options != NULL) + rc = ccid->ccid_ops->ccid_hc_tx_parse_options(sk, option, len, idx, + value); + return rc; } -/** - * ccid_hc_rx_parse_options - Parse CCID-specific options sent by the sender - * Arguments are analogous to ccid_hc_tx_parse_options() - */ static inline int ccid_hc_rx_parse_options(struct ccid *ccid, struct sock *sk, - u8 pkt, u8 opt, u8 *val, u8 len) + unsigned char option, + unsigned char len, u16 idx, + unsigned char* value) { - if (ccid->ccid_ops->ccid_hc_rx_parse_options == NULL) - return 0; - return ccid->ccid_ops->ccid_hc_rx_parse_options(sk, pkt, opt, val, len); + int rc = 0; + if (ccid->ccid_ops->ccid_hc_rx_parse_options != NULL) + rc = ccid->ccid_ops->ccid_hc_rx_parse_options(sk, option, len, idx, value); + return rc; } static inline int ccid_hc_rx_insert_options(struct ccid *ccid, struct sock *sk, diff --git a/net/dccp/ccids/Kconfig b/net/dccp/ccids/Kconfig index fb168be2cb4..12275943eab 100644 --- a/net/dccp/ccids/Kconfig +++ b/net/dccp/ccids/Kconfig @@ -1,8 +1,10 @@ menu "DCCP CCIDs Configuration (EXPERIMENTAL)" + depends on EXPERIMENTAL config IP_DCCP_CCID2 - tristate "CCID2 (TCP-Like)" + tristate "CCID2 (TCP-Like) (EXPERIMENTAL)" def_tristate IP_DCCP + select IP_DCCP_ACKVEC ---help--- CCID 2, TCP-like Congestion Control, denotes Additive Increase, Multiplicative Decrease (AIMD) congestion control with behavior @@ -34,7 +36,7 @@ config IP_DCCP_CCID2_DEBUG If in doubt, say N. config IP_DCCP_CCID3 - tristate "CCID3 (TCP-Friendly)" + tristate "CCID3 (TCP-Friendly) (EXPERIMENTAL)" def_tristate IP_DCCP select IP_DCCP_TFRC_LIB ---help--- @@ -62,9 +64,9 @@ config IP_DCCP_CCID3 If in doubt, say M. -if IP_DCCP_CCID3 config IP_DCCP_CCID3_DEBUG bool "CCID3 debugging messages" + depends on IP_DCCP_CCID3 ---help--- Enable CCID3-specific debugging messages. @@ -74,29 +76,10 @@ config IP_DCCP_CCID3_DEBUG If in doubt, say N. -choice - prompt "Select method for measuring the packet size s" - default IP_DCCP_CCID3_MEASURE_S_AS_MPS - -config IP_DCCP_CCID3_MEASURE_S_AS_MPS - bool "Always use MPS in place of s" - ---help--- - This use is recommended as it is consistent with the initialisation - of X and suggested when s varies (rfc3448bis, (1) in section 4.1). -config IP_DCCP_CCID3_MEASURE_S_AS_AVG - bool "Use moving average" - ---help--- - An alternative way of tracking s, also supported by rfc3448bis. - This used to be the default for CCID-3 in previous kernels. -config IP_DCCP_CCID3_MEASURE_S_AS_MAX - bool "Track the maximum payload length" - ---help--- - An experimental method based on tracking the maximum packet size. -endchoice - config IP_DCCP_CCID3_RTO int "Use higher bound for nofeedback timer" default 100 + depends on IP_DCCP_CCID3 && EXPERIMENTAL ---help--- Use higher lower bound for nofeedback timer expiration. @@ -123,7 +106,6 @@ config IP_DCCP_CCID3_RTO The purpose of the nofeedback timer is to slow DCCP down when there is serious network congestion: experimenting with larger values should therefore not be performed on WANs. -endif # IP_DCCP_CCID3 config IP_DCCP_TFRC_LIB tristate diff --git a/net/dccp/ccids/ccid2.c b/net/dccp/ccids/ccid2.c index fa713227c66..9a430734530 100644 --- a/net/dccp/ccids/ccid2.c +++ b/net/dccp/ccids/ccid2.c @@ -25,7 +25,7 @@ /* * This implementation should follow RFC 4341 */ -#include "../feat.h" + #include "../ccid.h" #include "../dccp.h" #include "ccid2.h" @@ -34,8 +34,51 @@ #ifdef CONFIG_IP_DCCP_CCID2_DEBUG static int ccid2_debug; #define ccid2_pr_debug(format, a...) DCCP_PR_DEBUG(ccid2_debug, format, ##a) + +static void ccid2_hc_tx_check_sanity(const struct ccid2_hc_tx_sock *hctx) +{ + int len = 0; + int pipe = 0; + struct ccid2_seq *seqp = hctx->ccid2hctx_seqh; + + /* there is data in the chain */ + if (seqp != hctx->ccid2hctx_seqt) { + seqp = seqp->ccid2s_prev; + len++; + if (!seqp->ccid2s_acked) + pipe++; + + while (seqp != hctx->ccid2hctx_seqt) { + struct ccid2_seq *prev = seqp->ccid2s_prev; + + len++; + if (!prev->ccid2s_acked) + pipe++; + + /* packets are sent sequentially */ + BUG_ON(dccp_delta_seqno(seqp->ccid2s_seq, + prev->ccid2s_seq ) >= 0); + BUG_ON(time_before(seqp->ccid2s_sent, + prev->ccid2s_sent)); + + seqp = prev; + } + } + + BUG_ON(pipe != hctx->ccid2hctx_pipe); + ccid2_pr_debug("len of chain=%d\n", len); + + do { + seqp = seqp->ccid2s_prev; + len++; + } while (seqp != hctx->ccid2hctx_seqh); + + ccid2_pr_debug("total len=%d\n", len); + BUG_ON(len != hctx->ccid2hctx_seqbufc * CCID2_SEQBUF_LEN); +} #else #define ccid2_pr_debug(format, a...) +#define ccid2_hc_tx_check_sanity(hctx) #endif static int ccid2_hc_tx_alloc_seq(struct ccid2_hc_tx_sock *hctx) @@ -44,7 +87,8 @@ static int ccid2_hc_tx_alloc_seq(struct ccid2_hc_tx_sock *hctx) int i; /* check if we have space to preserve the pointer to the buffer */ - if (hctx->seqbufc >= sizeof(hctx->seqbuf) / sizeof(struct ccid2_seq *)) + if (hctx->ccid2hctx_seqbufc >= (sizeof(hctx->ccid2hctx_seqbuf) / + sizeof(struct ccid2_seq*))) return -ENOMEM; /* allocate buffer and initialize linked list */ @@ -60,35 +104,38 @@ static int ccid2_hc_tx_alloc_seq(struct ccid2_hc_tx_sock *hctx) seqp->ccid2s_prev = &seqp[CCID2_SEQBUF_LEN - 1]; /* This is the first allocation. Initiate the head and tail. */ - if (hctx->seqbufc == 0) - hctx->seqh = hctx->seqt = seqp; + if (hctx->ccid2hctx_seqbufc == 0) + hctx->ccid2hctx_seqh = hctx->ccid2hctx_seqt = seqp; else { /* link the existing list with the one we just created */ - hctx->seqh->ccid2s_next = seqp; - seqp->ccid2s_prev = hctx->seqh; + hctx->ccid2hctx_seqh->ccid2s_next = seqp; + seqp->ccid2s_prev = hctx->ccid2hctx_seqh; - hctx->seqt->ccid2s_prev = &seqp[CCID2_SEQBUF_LEN - 1]; - seqp[CCID2_SEQBUF_LEN - 1].ccid2s_next = hctx->seqt; + hctx->ccid2hctx_seqt->ccid2s_prev = &seqp[CCID2_SEQBUF_LEN - 1]; + seqp[CCID2_SEQBUF_LEN - 1].ccid2s_next = hctx->ccid2hctx_seqt; } /* store the original pointer to the buffer so we can free it */ - hctx->seqbuf[hctx->seqbufc] = seqp; - hctx->seqbufc++; + hctx->ccid2hctx_seqbuf[hctx->ccid2hctx_seqbufc] = seqp; + hctx->ccid2hctx_seqbufc++; return 0; } static int ccid2_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb) { - if (ccid2_cwnd_network_limited(ccid2_hc_tx_sk(sk))) - return CCID_PACKET_WILL_DEQUEUE_LATER; - return CCID_PACKET_SEND_AT_ONCE; + struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk); + + if (hctx->ccid2hctx_pipe < hctx->ccid2hctx_cwnd) + return 0; + + return 1; /* XXX CCID should dequeue when ready instead of polling */ } static void ccid2_change_l_ack_ratio(struct sock *sk, u32 val) { struct dccp_sock *dp = dccp_sk(sk); - u32 max_ratio = DIV_ROUND_UP(ccid2_hc_tx_sk(sk)->cwnd, 2); + u32 max_ratio = DIV_ROUND_UP(ccid2_hc_tx_sk(sk)->ccid2hctx_cwnd, 2); /* * Ensure that Ack Ratio does not exceed ceil(cwnd/2), which is (2) from @@ -100,8 +147,8 @@ static void ccid2_change_l_ack_ratio(struct sock *sk, u32 val) DCCP_WARN("Limiting Ack Ratio (%u) to %u\n", val, max_ratio); val = max_ratio; } - if (val > DCCPF_ACK_RATIO_MAX) - val = DCCPF_ACK_RATIO_MAX; + if (val > 0xFFFF) /* RFC 4340, 11.3 */ + val = 0xFFFF; if (val == dp->dccps_l_ack_ratio) return; @@ -110,77 +157,99 @@ static void ccid2_change_l_ack_ratio(struct sock *sk, u32 val) dp->dccps_l_ack_ratio = val; } +static void ccid2_change_srtt(struct ccid2_hc_tx_sock *hctx, long val) +{ + ccid2_pr_debug("change SRTT to %ld\n", val); + hctx->ccid2hctx_srtt = val; +} + +static void ccid2_start_rto_timer(struct sock *sk); + static void ccid2_hc_tx_rto_expire(unsigned long data) { struct sock *sk = (struct sock *)data; struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk); - const bool sender_was_blocked = ccid2_cwnd_network_limited(hctx); + long s; bh_lock_sock(sk); if (sock_owned_by_user(sk)) { - sk_reset_timer(sk, &hctx->rtotimer, jiffies + HZ / 5); + sk_reset_timer(sk, &hctx->ccid2hctx_rtotimer, + jiffies + HZ / 5); goto out; } ccid2_pr_debug("RTO_EXPIRE\n"); + ccid2_hc_tx_check_sanity(hctx); + /* back-off timer */ - hctx->rto <<= 1; - if (hctx->rto > DCCP_RTO_MAX) - hctx->rto = DCCP_RTO_MAX; + hctx->ccid2hctx_rto <<= 1; + + s = hctx->ccid2hctx_rto / HZ; + if (s > 60) + hctx->ccid2hctx_rto = 60 * HZ; + + ccid2_start_rto_timer(sk); /* adjust pipe, cwnd etc */ - hctx->ssthresh = hctx->cwnd / 2; - if (hctx->ssthresh < 2) - hctx->ssthresh = 2; - hctx->cwnd = 1; - hctx->pipe = 0; + hctx->ccid2hctx_ssthresh = hctx->ccid2hctx_cwnd / 2; + if (hctx->ccid2hctx_ssthresh < 2) + hctx->ccid2hctx_ssthresh = 2; + hctx->ccid2hctx_cwnd = 1; + hctx->ccid2hctx_pipe = 0; /* clear state about stuff we sent */ - hctx->seqt = hctx->seqh; - hctx->packets_acked = 0; + hctx->ccid2hctx_seqt = hctx->ccid2hctx_seqh; + hctx->ccid2hctx_packets_acked = 0; /* clear ack ratio state. */ - hctx->rpseq = 0; - hctx->rpdupack = -1; + hctx->ccid2hctx_rpseq = 0; + hctx->ccid2hctx_rpdupack = -1; ccid2_change_l_ack_ratio(sk, 1); - - /* if we were blocked before, we may now send cwnd=1 packet */ - if (sender_was_blocked) - tasklet_schedule(&dccp_sk(sk)->dccps_xmitlet); - /* restart backed-off timer */ - sk_reset_timer(sk, &hctx->rtotimer, jiffies + hctx->rto); + ccid2_hc_tx_check_sanity(hctx); out: bh_unlock_sock(sk); sock_put(sk); } -static void ccid2_hc_tx_packet_sent(struct sock *sk, unsigned int len) +static void ccid2_start_rto_timer(struct sock *sk) +{ + struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk); + + ccid2_pr_debug("setting RTO timeout=%ld\n", hctx->ccid2hctx_rto); + + BUG_ON(timer_pending(&hctx->ccid2hctx_rtotimer)); + sk_reset_timer(sk, &hctx->ccid2hctx_rtotimer, + jiffies + hctx->ccid2hctx_rto); +} + +static void ccid2_hc_tx_packet_sent(struct sock *sk, int more, unsigned int len) { struct dccp_sock *dp = dccp_sk(sk); struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk); struct ccid2_seq *next; - hctx->pipe++; + hctx->ccid2hctx_pipe++; - hctx->seqh->ccid2s_seq = dp->dccps_gss; - hctx->seqh->ccid2s_acked = 0; - hctx->seqh->ccid2s_sent = jiffies; + hctx->ccid2hctx_seqh->ccid2s_seq = dp->dccps_gss; + hctx->ccid2hctx_seqh->ccid2s_acked = 0; + hctx->ccid2hctx_seqh->ccid2s_sent = jiffies; - next = hctx->seqh->ccid2s_next; + next = hctx->ccid2hctx_seqh->ccid2s_next; /* check if we need to alloc more space */ - if (next == hctx->seqt) { + if (next == hctx->ccid2hctx_seqt) { if (ccid2_hc_tx_alloc_seq(hctx)) { DCCP_CRIT("packet history - out of memory!"); /* FIXME: find a more graceful way to bail out */ return; } - next = hctx->seqh->ccid2s_next; - BUG_ON(next == hctx->seqt); + next = hctx->ccid2hctx_seqh->ccid2s_next; + BUG_ON(next == hctx->ccid2hctx_seqt); } - hctx->seqh = next; + hctx->ccid2hctx_seqh = next; - ccid2_pr_debug("cwnd=%d pipe=%d\n", hctx->cwnd, hctx->pipe); + ccid2_pr_debug("cwnd=%d pipe=%d\n", hctx->ccid2hctx_cwnd, + hctx->ccid2hctx_pipe); /* * FIXME: The code below is broken and the variables have been removed @@ -203,12 +272,12 @@ static void ccid2_hc_tx_packet_sent(struct sock *sk, unsigned int len) */ #if 0 /* Ack Ratio. Need to maintain a concept of how many windows we sent */ - hctx->arsent++; + hctx->ccid2hctx_arsent++; /* We had an ack loss in this window... */ - if (hctx->ackloss) { - if (hctx->arsent >= hctx->cwnd) { - hctx->arsent = 0; - hctx->ackloss = 0; + if (hctx->ccid2hctx_ackloss) { + if (hctx->ccid2hctx_arsent >= hctx->ccid2hctx_cwnd) { + hctx->ccid2hctx_arsent = 0; + hctx->ccid2hctx_ackloss = 0; } } else { /* No acks lost up to now... */ @@ -218,28 +287,28 @@ static void ccid2_hc_tx_packet_sent(struct sock *sk, unsigned int len) int denom = dp->dccps_l_ack_ratio * dp->dccps_l_ack_ratio - dp->dccps_l_ack_ratio; - denom = hctx->cwnd * hctx->cwnd / denom; + denom = hctx->ccid2hctx_cwnd * hctx->ccid2hctx_cwnd / denom; - if (hctx->arsent >= denom) { + if (hctx->ccid2hctx_arsent >= denom) { ccid2_change_l_ack_ratio(sk, dp->dccps_l_ack_ratio - 1); - hctx->arsent = 0; + hctx->ccid2hctx_arsent = 0; } } else { /* we can't increase ack ratio further [1] */ - hctx->arsent = 0; /* or maybe set it to cwnd*/ + hctx->ccid2hctx_arsent = 0; /* or maybe set it to cwnd*/ } } #endif /* setup RTO timer */ - if (!timer_pending(&hctx->rtotimer)) - sk_reset_timer(sk, &hctx->rtotimer, jiffies + hctx->rto); + if (!timer_pending(&hctx->ccid2hctx_rtotimer)) + ccid2_start_rto_timer(sk); #ifdef CONFIG_IP_DCCP_CCID2_DEBUG do { - struct ccid2_seq *seqp = hctx->seqt; + struct ccid2_seq *seqp = hctx->ccid2hctx_seqt; - while (seqp != hctx->seqh) { + while (seqp != hctx->ccid2hctx_seqh) { ccid2_pr_debug("out seq=%llu acked=%d time=%lu\n", (unsigned long long)seqp->ccid2s_seq, seqp->ccid2s_acked, seqp->ccid2s_sent); @@ -247,158 +316,205 @@ static void ccid2_hc_tx_packet_sent(struct sock *sk, unsigned int len) } } while (0); ccid2_pr_debug("=========\n"); + ccid2_hc_tx_check_sanity(hctx); #endif } -/** - * ccid2_rtt_estimator - Sample RTT and compute RTO using RFC2988 algorithm - * This code is almost identical with TCP's tcp_rtt_estimator(), since - * - it has a higher sampling frequency (recommended by RFC 1323), - * - the RTO does not collapse into RTT due to RTTVAR going towards zero, - * - it is simple (cf. more complex proposals such as Eifel timer or research - * which suggests that the gain should be set according to window size), - * - in tests it was found to work well with CCID2 [gerrit]. +/* XXX Lame code duplication! + * returns -1 if none was found. + * else returns the next offset to use in the function call. */ -static void ccid2_rtt_estimator(struct sock *sk, const long mrtt) +static int ccid2_ackvector(struct sock *sk, struct sk_buff *skb, int offset, + unsigned char **vec, unsigned char *veclen) { - struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk); - long m = mrtt ? : 1; - - if (hctx->srtt == 0) { - /* First measurement m */ - hctx->srtt = m << 3; - hctx->mdev = m << 1; - - hctx->mdev_max = max(TCP_RTO_MIN, hctx->mdev); - hctx->rttvar = hctx->mdev_max; - hctx->rtt_seq = dccp_sk(sk)->dccps_gss; - } else { - /* Update scaled SRTT as SRTT += 1/8 * (m - SRTT) */ - m -= (hctx->srtt >> 3); - hctx->srtt += m; - - /* Similarly, update scaled mdev with regard to |m| */ - if (m < 0) { - m = -m; - m -= (hctx->mdev >> 2); + const struct dccp_hdr *dh = dccp_hdr(skb); + unsigned char *options = (unsigned char *)dh + dccp_hdr_len(skb); + unsigned char *opt_ptr; + const unsigned char *opt_end = (unsigned char *)dh + + (dh->dccph_doff * 4); + unsigned char opt, len; + unsigned char *value; + + BUG_ON(offset < 0); + options += offset; + opt_ptr = options; + if (opt_ptr >= opt_end) + return -1; + + while (opt_ptr != opt_end) { + opt = *opt_ptr++; + len = 0; + value = NULL; + + /* Check if this isn't a single byte option */ + if (opt > DCCPO_MAX_RESERVED) { + if (opt_ptr == opt_end) + goto out_invalid_option; + + len = *opt_ptr++; + if (len < 3) + goto out_invalid_option; /* - * This neutralises RTO increase when RTT < SRTT - mdev - * (see P. Sarolahti, A. Kuznetsov,"Congestion Control - * in Linux TCP", USENIX 2002, pp. 49-62). + * Remove the type and len fields, leaving + * just the value size */ - if (m > 0) - m >>= 3; - } else { - m -= (hctx->mdev >> 2); - } - hctx->mdev += m; + len -= 2; + value = opt_ptr; + opt_ptr += len; - if (hctx->mdev > hctx->mdev_max) { - hctx->mdev_max = hctx->mdev; - if (hctx->mdev_max > hctx->rttvar) - hctx->rttvar = hctx->mdev_max; + if (opt_ptr > opt_end) + goto out_invalid_option; } - /* - * Decay RTTVAR at most once per flight, exploiting that - * 1) pipe <= cwnd <= Sequence_Window = W (RFC 4340, 7.5.2) - * 2) AWL = GSS-W+1 <= GAR <= GSS (RFC 4340, 7.5.1) - * GAR is a useful bound for FlightSize = pipe, AWL is probably - * too low as it over-estimates pipe. - */ - if (after48(dccp_sk(sk)->dccps_gar, hctx->rtt_seq)) { - if (hctx->mdev_max < hctx->rttvar) - hctx->rttvar -= (hctx->rttvar - - hctx->mdev_max) >> 2; - hctx->rtt_seq = dccp_sk(sk)->dccps_gss; - hctx->mdev_max = TCP_RTO_MIN; + switch (opt) { + case DCCPO_ACK_VECTOR_0: + case DCCPO_ACK_VECTOR_1: + *vec = value; + *veclen = len; + return offset + (opt_ptr - options); } } - /* - * Set RTO from SRTT and RTTVAR - * Clock granularity is ignored since the minimum error for RTTVAR is - * clamped to 50msec (corresponding to HZ=20). This leads to a minimum - * RTO of 200msec. This agrees with TCP and RFC 4341, 5.: "Because DCCP - * does not retransmit data, DCCP does not require TCP's recommended - * minimum timeout of one second". - */ - hctx->rto = (hctx->srtt >> 3) + hctx->rttvar; + return -1; - if (hctx->rto > DCCP_RTO_MAX) - hctx->rto = DCCP_RTO_MAX; +out_invalid_option: + DCCP_BUG("Invalid option - this should not happen (previous parsing)!"); + return -1; } -static void ccid2_new_ack(struct sock *sk, struct ccid2_seq *seqp, - unsigned int *maxincr) +static void ccid2_hc_tx_kill_rto_timer(struct sock *sk) { struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk); - if (hctx->cwnd < hctx->ssthresh) { - if (*maxincr > 0 && ++hctx->packets_acked == 2) { - hctx->cwnd += 1; - *maxincr -= 1; - hctx->packets_acked = 0; - } - } else if (++hctx->packets_acked >= hctx->cwnd) { - hctx->cwnd += 1; - hctx->packets_acked = 0; - } - /* - * FIXME: RTT is sampled several times per acknowledgment (for each - * entry in the Ack Vector), instead of once per Ack (as in TCP SACK). - * This causes the RTT to be over-estimated, since the older entries - * in the Ack Vector have earlier sending times. - * The cleanest solution is to not use the ccid2s_sent field at all - * and instead use DCCP timestamps - need to be resolved at some time. - */ - ccid2_rtt_estimator(sk, jiffies - seqp->ccid2s_sent); + sk_stop_timer(sk, &hctx->ccid2hctx_rtotimer); + ccid2_pr_debug("deleted RTO timer\n"); } -static void ccid2_congestion_event(struct sock *sk, struct ccid2_seq *seqp) +static inline void ccid2_new_ack(struct sock *sk, + struct ccid2_seq *seqp, + unsigned int *maxincr) { struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk); - if (time_before(seqp->ccid2s_sent, hctx->last_cong)) { - ccid2_pr_debug("Multiple losses in an RTT---treating as one\n"); - return; + if (hctx->ccid2hctx_cwnd < hctx->ccid2hctx_ssthresh) { + if (*maxincr > 0 && ++hctx->ccid2hctx_packets_acked == 2) { + hctx->ccid2hctx_cwnd += 1; + *maxincr -= 1; + hctx->ccid2hctx_packets_acked = 0; + } + } else if (++hctx->ccid2hctx_packets_acked >= hctx->ccid2hctx_cwnd) { + hctx->ccid2hctx_cwnd += 1; + hctx->ccid2hctx_packets_acked = 0; } - hctx->last_cong = jiffies; + /* update RTO */ + if (hctx->ccid2hctx_srtt == -1 || + time_after(jiffies, hctx->ccid2hctx_lastrtt + hctx->ccid2hctx_srtt)) { + unsigned long r = (long)jiffies - (long)seqp->ccid2s_sent; + int s; + + /* first measurement */ + if (hctx->ccid2hctx_srtt == -1) { + ccid2_pr_debug("R: %lu Time=%lu seq=%llu\n", + r, jiffies, + (unsigned long long)seqp->ccid2s_seq); + ccid2_change_srtt(hctx, r); + hctx->ccid2hctx_rttvar = r >> 1; + } else { + /* RTTVAR */ + long tmp = hctx->ccid2hctx_srtt - r; + long srtt; + + if (tmp < 0) + tmp *= -1; + + tmp >>= 2; + hctx->ccid2hctx_rttvar *= 3; + hctx->ccid2hctx_rttvar >>= 2; + hctx->ccid2hctx_rttvar += tmp; + + /* SRTT */ + srtt = hctx->ccid2hctx_srtt; + srtt *= 7; + srtt >>= 3; + tmp = r >> 3; + srtt += tmp; + ccid2_change_srtt(hctx, srtt); + } + s = hctx->ccid2hctx_rttvar << 2; + /* clock granularity is 1 when based on jiffies */ + if (!s) + s = 1; + hctx->ccid2hctx_rto = hctx->ccid2hctx_srtt + s; + + /* must be at least a second */ + s = hctx->ccid2hctx_rto / HZ; + /* DCCP doesn't require this [but I like it cuz my code sux] */ +#if 1 + if (s < 1) + hctx->ccid2hctx_rto = HZ; +#endif + /* max 60 seconds */ + if (s > 60) + hctx->ccid2hctx_rto = HZ * 60; - hctx->cwnd = hctx->cwnd / 2 ? : 1U; - hctx->ssthresh = max(hctx->cwnd, 2U); + hctx->ccid2hctx_lastrtt = jiffies; - /* Avoid spurious timeouts resulting from Ack Ratio > cwnd */ - if (dccp_sk(sk)->dccps_l_ack_ratio > hctx->cwnd) - ccid2_change_l_ack_ratio(sk, hctx->cwnd); + ccid2_pr_debug("srtt: %ld rttvar: %ld rto: %ld (HZ=%d) R=%lu\n", + hctx->ccid2hctx_srtt, hctx->ccid2hctx_rttvar, + hctx->ccid2hctx_rto, HZ, r); + } + + /* we got a new ack, so re-start RTO timer */ + ccid2_hc_tx_kill_rto_timer(sk); + ccid2_start_rto_timer(sk); } -static int ccid2_hc_tx_parse_options(struct sock *sk, u8 packet_type, - u8 option, u8 *optval, u8 optlen) +static void ccid2_hc_tx_dec_pipe(struct sock *sk) { struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk); - switch (option) { - case DCCPO_ACK_VECTOR_0: - case DCCPO_ACK_VECTOR_1: - return dccp_ackvec_parsed_add(&hctx->av_chunks, optval, optlen, - option - DCCPO_ACK_VECTOR_0); + if (hctx->ccid2hctx_pipe == 0) + DCCP_BUG("pipe == 0"); + else + hctx->ccid2hctx_pipe--; + + if (hctx->ccid2hctx_pipe == 0) + ccid2_hc_tx_kill_rto_timer(sk); +} + +static void ccid2_congestion_event(struct sock *sk, struct ccid2_seq *seqp) +{ + struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk); + + if (time_before(seqp->ccid2s_sent, hctx->ccid2hctx_last_cong)) { + ccid2_pr_debug("Multiple losses in an RTT---treating as one\n"); + return; } - return 0; + + hctx->ccid2hctx_last_cong = jiffies; + + hctx->ccid2hctx_cwnd = hctx->ccid2hctx_cwnd / 2 ? : 1U; + hctx->ccid2hctx_ssthresh = max(hctx->ccid2hctx_cwnd, 2U); + + /* Avoid spurious timeouts resulting from Ack Ratio > cwnd */ + if (dccp_sk(sk)->dccps_l_ack_ratio > hctx->ccid2hctx_cwnd) + ccid2_change_l_ack_ratio(sk, hctx->ccid2hctx_cwnd); } static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) { struct dccp_sock *dp = dccp_sk(sk); struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk); - const bool sender_was_blocked = ccid2_cwnd_network_limited(hctx); - struct dccp_ackvec_parsed *avp; u64 ackno, seqno; struct ccid2_seq *seqp; + unsigned char *vector; + unsigned char veclen; + int offset = 0; int done = 0; unsigned int maxincr = 0; + ccid2_hc_tx_check_sanity(hctx); /* check reverse path congestion */ seqno = DCCP_SKB_CB(skb)->dccpd_seq; @@ -407,21 +523,21 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) * -sorbo. */ /* need to bootstrap */ - if (hctx->rpdupack == -1) { - hctx->rpdupack = 0; - hctx->rpseq = seqno; + if (hctx->ccid2hctx_rpdupack == -1) { + hctx->ccid2hctx_rpdupack = 0; + hctx->ccid2hctx_rpseq = seqno; } else { /* check if packet is consecutive */ - if (dccp_delta_seqno(hctx->rpseq, seqno) == 1) - hctx->rpseq = seqno; + if (dccp_delta_seqno(hctx->ccid2hctx_rpseq, seqno) == 1) + hctx->ccid2hctx_rpseq = seqno; /* it's a later packet */ - else if (after48(seqno, hctx->rpseq)) { - hctx->rpdupack++; + else if (after48(seqno, hctx->ccid2hctx_rpseq)) { + hctx->ccid2hctx_rpdupack++; /* check if we got enough dupacks */ - if (hctx->rpdupack >= NUMDUPACK) { - hctx->rpdupack = -1; /* XXX lame */ - hctx->rpseq = 0; + if (hctx->ccid2hctx_rpdupack >= NUMDUPACK) { + hctx->ccid2hctx_rpdupack = -1; /* XXX lame */ + hctx->ccid2hctx_rpseq = 0; ccid2_change_l_ack_ratio(sk, 2 * dp->dccps_l_ack_ratio); } @@ -429,22 +545,27 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) } /* check forward path congestion */ - if (dccp_packet_without_ack(skb)) + /* still didn't send out new data packets */ + if (hctx->ccid2hctx_seqh == hctx->ccid2hctx_seqt) return; - /* still didn't send out new data packets */ - if (hctx->seqh == hctx->seqt) - goto done; + switch (DCCP_SKB_CB(skb)->dccpd_type) { + case DCCP_PKT_ACK: + case DCCP_PKT_DATAACK: + break; + default: + return; + } ackno = DCCP_SKB_CB(skb)->dccpd_ack_seq; - if (after48(ackno, hctx->high_ack)) - hctx->high_ack = ackno; + if (after48(ackno, hctx->ccid2hctx_high_ack)) + hctx->ccid2hctx_high_ack = ackno; - seqp = hctx->seqt; + seqp = hctx->ccid2hctx_seqt; while (before48(seqp->ccid2s_seq, ackno)) { seqp = seqp->ccid2s_next; - if (seqp == hctx->seqh) { - seqp = hctx->seqh->ccid2s_prev; + if (seqp == hctx->ccid2hctx_seqh) { + seqp = hctx->ccid2hctx_seqh->ccid2s_prev; break; } } @@ -454,26 +575,26 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) * packets per acknowledgement. Rounding up avoids that cwnd is not * advanced when Ack Ratio is 1 and gives a slight edge otherwise. */ - if (hctx->cwnd < hctx->ssthresh) + if (hctx->ccid2hctx_cwnd < hctx->ccid2hctx_ssthresh) maxincr = DIV_ROUND_UP(dp->dccps_l_ack_ratio, 2); /* go through all ack vectors */ - list_for_each_entry(avp, &hctx->av_chunks, node) { + while ((offset = ccid2_ackvector(sk, skb, offset, + &vector, &veclen)) != -1) { /* go through this ack vector */ - for (; avp->len--; avp->vec++) { - u64 ackno_end_rl = SUB48(ackno, - dccp_ackvec_runlen(avp->vec)); + while (veclen--) { + const u8 rl = *vector & DCCP_ACKVEC_LEN_MASK; + u64 ackno_end_rl = SUB48(ackno, rl); - ccid2_pr_debug("ackvec %llu |%u,%u|\n", + ccid2_pr_debug("ackvec start:%llu end:%llu\n", (unsigned long long)ackno, - dccp_ackvec_state(avp->vec) >> 6, - dccp_ackvec_runlen(avp->vec)); + (unsigned long long)ackno_end_rl); /* if the seqno we are analyzing is larger than the * current ackno, then move towards the tail of our * seqnos. */ while (after48(seqp->ccid2s_seq, ackno)) { - if (seqp == hctx->seqt) { + if (seqp == hctx->ccid2hctx_seqt) { done = 1; break; } @@ -486,24 +607,26 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) * run length */ while (between48(seqp->ccid2s_seq,ackno_end_rl,ackno)) { - const u8 state = dccp_ackvec_state(avp->vec); + const u8 state = *vector & + DCCP_ACKVEC_STATE_MASK; /* new packet received or marked */ - if (state != DCCPAV_NOT_RECEIVED && + if (state != DCCP_ACKVEC_STATE_NOT_RECEIVED && !seqp->ccid2s_acked) { - if (state == DCCPAV_ECN_MARKED) + if (state == + DCCP_ACKVEC_STATE_ECN_MARKED) { ccid2_congestion_event(sk, seqp); - else + } else ccid2_new_ack(sk, seqp, &maxincr); seqp->ccid2s_acked = 1; ccid2_pr_debug("Got ack for %llu\n", (unsigned long long)seqp->ccid2s_seq); - hctx->pipe--; + ccid2_hc_tx_dec_pipe(sk); } - if (seqp == hctx->seqt) { + if (seqp == hctx->ccid2hctx_seqt) { done = 1; break; } @@ -513,6 +636,7 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) break; ackno = SUB48(ackno_end_rl, 1); + vector++; } if (done) break; @@ -521,11 +645,11 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) /* The state about what is acked should be correct now * Check for NUMDUPACK */ - seqp = hctx->seqt; - while (before48(seqp->ccid2s_seq, hctx->high_ack)) { + seqp = hctx->ccid2hctx_seqt; + while (before48(seqp->ccid2s_seq, hctx->ccid2hctx_high_ack)) { seqp = seqp->ccid2s_next; - if (seqp == hctx->seqh) { - seqp = hctx->seqh->ccid2s_prev; + if (seqp == hctx->ccid2hctx_seqh) { + seqp = hctx->ccid2hctx_seqh->ccid2s_prev; break; } } @@ -536,7 +660,7 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) if (done == NUMDUPACK) break; } - if (seqp == hctx->seqt) + if (seqp == hctx->ccid2hctx_seqt) break; seqp = seqp->ccid2s_prev; } @@ -557,34 +681,25 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) * one ack vector. */ ccid2_congestion_event(sk, seqp); - hctx->pipe--; + ccid2_hc_tx_dec_pipe(sk); } - if (seqp == hctx->seqt) + if (seqp == hctx->ccid2hctx_seqt) break; seqp = seqp->ccid2s_prev; } - hctx->seqt = last_acked; + hctx->ccid2hctx_seqt = last_acked; } /* trim acked packets in tail */ - while (hctx->seqt != hctx->seqh) { - if (!hctx->seqt->ccid2s_acked) + while (hctx->ccid2hctx_seqt != hctx->ccid2hctx_seqh) { + if (!hctx->ccid2hctx_seqt->ccid2s_acked) break; - hctx->seqt = hctx->seqt->ccid2s_next; + hctx->ccid2hctx_seqt = hctx->ccid2hctx_seqt->ccid2s_next; } - /* restart RTO timer if not all outstanding data has been acked */ - if (hctx->pipe == 0) - sk_stop_timer(sk, &hctx->rtotimer); - else - sk_reset_timer(sk, &hctx->rtotimer, jiffies + hctx->rto); -done: - /* check if incoming Acks allow pending packets to be sent */ - if (sender_was_blocked && !ccid2_cwnd_network_limited(hctx)) - tasklet_schedule(&dccp_sk(sk)->dccps_xmitlet); - dccp_ackvec_parsed_cleanup(&hctx->av_chunks); + ccid2_hc_tx_check_sanity(hctx); } static int ccid2_hc_tx_init(struct ccid *ccid, struct sock *sk) @@ -594,13 +709,17 @@ static int ccid2_hc_tx_init(struct ccid *ccid, struct sock *sk) u32 max_ratio; /* RFC 4341, 5: initialise ssthresh to arbitrarily high (max) value */ - hctx->ssthresh = ~0U; + hctx->ccid2hctx_ssthresh = ~0U; - /* Use larger initial windows (RFC 3390, rfc2581bis) */ - hctx->cwnd = rfc3390_bytes_to_packets(dp->dccps_mss_cache); + /* + * RFC 4341, 5: "The cwnd parameter is initialized to at most four + * packets for new connections, following the rules from [RFC3390]". + * We need to convert the bytes of RFC3390 into the packets of RFC 4341. + */ + hctx->ccid2hctx_cwnd = clamp(4380U / dp->dccps_mss_cache, 2U, 4U); /* Make sure that Ack Ratio is enabled and within bounds. */ - max_ratio = DIV_ROUND_UP(hctx->cwnd, 2); + max_ratio = DIV_ROUND_UP(hctx->ccid2hctx_cwnd, 2); if (dp->dccps_l_ack_ratio == 0 || dp->dccps_l_ack_ratio > max_ratio) dp->dccps_l_ack_ratio = max_ratio; @@ -608,11 +727,15 @@ static int ccid2_hc_tx_init(struct ccid *ccid, struct sock *sk) if (ccid2_hc_tx_alloc_seq(hctx)) return -ENOMEM; - hctx->rto = DCCP_TIMEOUT_INIT; - hctx->rpdupack = -1; - hctx->last_cong = jiffies; - setup_timer(&hctx->rtotimer, ccid2_hc_tx_rto_expire, (unsigned long)sk); - INIT_LIST_HEAD(&hctx->av_chunks); + hctx->ccid2hctx_rto = 3 * HZ; + ccid2_change_srtt(hctx, -1); + hctx->ccid2hctx_rttvar = -1; + hctx->ccid2hctx_rpdupack = -1; + hctx->ccid2hctx_last_cong = jiffies; + setup_timer(&hctx->ccid2hctx_rtotimer, ccid2_hc_tx_rto_expire, + (unsigned long)sk); + + ccid2_hc_tx_check_sanity(hctx); return 0; } @@ -621,11 +744,11 @@ static void ccid2_hc_tx_exit(struct sock *sk) struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk); int i; - sk_stop_timer(sk, &hctx->rtotimer); + ccid2_hc_tx_kill_rto_timer(sk); - for (i = 0; i < hctx->seqbufc; i++) - kfree(hctx->seqbuf[i]); - hctx->seqbufc = 0; + for (i = 0; i < hctx->ccid2hctx_seqbufc; i++) + kfree(hctx->ccid2hctx_seqbuf[i]); + hctx->ccid2hctx_seqbufc = 0; } static void ccid2_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) @@ -636,28 +759,27 @@ static void ccid2_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) switch (DCCP_SKB_CB(skb)->dccpd_type) { case DCCP_PKT_DATA: case DCCP_PKT_DATAACK: - hcrx->data++; - if (hcrx->data >= dp->dccps_r_ack_ratio) { + hcrx->ccid2hcrx_data++; + if (hcrx->ccid2hcrx_data >= dp->dccps_r_ack_ratio) { dccp_send_ack(sk); - hcrx->data = 0; + hcrx->ccid2hcrx_data = 0; } break; } } static struct ccid_operations ccid2 = { - .ccid_id = DCCPC_CCID2, - .ccid_name = "TCP-like", - .ccid_owner = THIS_MODULE, - .ccid_hc_tx_obj_size = sizeof(struct ccid2_hc_tx_sock), - .ccid_hc_tx_init = ccid2_hc_tx_init, - .ccid_hc_tx_exit = ccid2_hc_tx_exit, - .ccid_hc_tx_send_packet = ccid2_hc_tx_send_packet, - .ccid_hc_tx_packet_sent = ccid2_hc_tx_packet_sent, - .ccid_hc_tx_parse_options = ccid2_hc_tx_parse_options, - .ccid_hc_tx_packet_recv = ccid2_hc_tx_packet_recv, - .ccid_hc_rx_obj_size = sizeof(struct ccid2_hc_rx_sock), - .ccid_hc_rx_packet_recv = ccid2_hc_rx_packet_recv, + .ccid_id = DCCPC_CCID2, + .ccid_name = "TCP-like", + .ccid_owner = THIS_MODULE, + .ccid_hc_tx_obj_size = sizeof(struct ccid2_hc_tx_sock), + .ccid_hc_tx_init = ccid2_hc_tx_init, + .ccid_hc_tx_exit = ccid2_hc_tx_exit, + .ccid_hc_tx_send_packet = ccid2_hc_tx_send_packet, + .ccid_hc_tx_packet_sent = ccid2_hc_tx_packet_sent, + .ccid_hc_tx_packet_recv = ccid2_hc_tx_packet_recv, + .ccid_hc_rx_obj_size = sizeof(struct ccid2_hc_rx_sock), + .ccid_hc_rx_packet_recv = ccid2_hc_rx_packet_recv, }; #ifdef CONFIG_IP_DCCP_CCID2_DEBUG diff --git a/net/dccp/ccids/ccid2.h b/net/dccp/ccids/ccid2.h index 8b7a2dee2f6..2c94ca02901 100644 --- a/net/dccp/ccids/ccid2.h +++ b/net/dccp/ccids/ccid2.h @@ -42,49 +42,34 @@ struct ccid2_seq { /** struct ccid2_hc_tx_sock - CCID2 TX half connection * - * @{cwnd,ssthresh,pipe}: as per RFC 4341, section 5 - * @packets_acked: Ack counter for deriving cwnd growth (RFC 3465) - * @srtt: smoothed RTT estimate, scaled by 2^3 - * @mdev: smoothed RTT variation, scaled by 2^2 - * @mdev_max: maximum of @mdev during one flight - * @rttvar: moving average/maximum of @mdev_max - * @rto: RTO value deriving from SRTT and RTTVAR (RFC 2988) - * @rtt_seq: to decay RTTVAR at most once per flight - * @rpseq: last consecutive seqno - * @rpdupack: dupacks since rpseq - * @av_chunks: list of Ack Vectors received on current skb - */ + * @ccid2hctx_{cwnd,ssthresh,pipe}: as per RFC 4341, section 5 + * @ccid2hctx_packets_acked - Ack counter for deriving cwnd growth (RFC 3465) + * @ccid2hctx_lastrtt -time RTT was last measured + * @ccid2hctx_rpseq - last consecutive seqno + * @ccid2hctx_rpdupack - dupacks since rpseq +*/ struct ccid2_hc_tx_sock { - u32 cwnd; - u32 ssthresh; - u32 pipe; - u32 packets_acked; - struct ccid2_seq *seqbuf[CCID2_SEQBUF_MAX]; - int seqbufc; - struct ccid2_seq *seqh; - struct ccid2_seq *seqt; - /* RTT measurement: variables/principles are the same as in TCP */ - u32 srtt, - mdev, - mdev_max, - rttvar, - rto; - u64 rtt_seq:48; - struct timer_list rtotimer; - u64 rpseq; - int rpdupack; - unsigned long last_cong; - u64 high_ack; - struct list_head av_chunks; + u32 ccid2hctx_cwnd; + u32 ccid2hctx_ssthresh; + u32 ccid2hctx_pipe; + u32 ccid2hctx_packets_acked; + struct ccid2_seq *ccid2hctx_seqbuf[CCID2_SEQBUF_MAX]; + int ccid2hctx_seqbufc; + struct ccid2_seq *ccid2hctx_seqh; + struct ccid2_seq *ccid2hctx_seqt; + long ccid2hctx_rto; + long ccid2hctx_srtt; + long ccid2hctx_rttvar; + unsigned long ccid2hctx_lastrtt; + struct timer_list ccid2hctx_rtotimer; + u64 ccid2hctx_rpseq; + int ccid2hctx_rpdupack; + unsigned long ccid2hctx_last_cong; + u64 ccid2hctx_high_ack; }; -static inline bool ccid2_cwnd_network_limited(struct ccid2_hc_tx_sock *hctx) -{ - return (hctx->pipe >= hctx->cwnd); -} - struct ccid2_hc_rx_sock { - int data; + int ccid2hcrx_data; }; static inline struct ccid2_hc_tx_sock *ccid2_hc_tx_sk(const struct sock *sk) diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index 06cfdad84a6..3b8bd7ca676 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -49,41 +49,75 @@ static int ccid3_debug; /* * Transmitter Half-Connection Routines */ -/* Oscillation Prevention/Reduction: recommended by rfc3448bis, on by default */ -static int do_osc_prev = true; +#ifdef CONFIG_IP_DCCP_CCID3_DEBUG +static const char *ccid3_tx_state_name(enum ccid3_hc_tx_states state) +{ + static char *ccid3_state_names[] = { + [TFRC_SSTATE_NO_SENT] = "NO_SENT", + [TFRC_SSTATE_NO_FBACK] = "NO_FBACK", + [TFRC_SSTATE_FBACK] = "FBACK", + [TFRC_SSTATE_TERM] = "TERM", + }; + + return ccid3_state_names[state]; +} +#endif + +static void ccid3_hc_tx_set_state(struct sock *sk, + enum ccid3_hc_tx_states state) +{ + struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); + enum ccid3_hc_tx_states oldstate = hctx->ccid3hctx_state; + + ccid3_pr_debug("%s(%p) %-8.8s -> %s\n", + dccp_role(sk), sk, ccid3_tx_state_name(oldstate), + ccid3_tx_state_name(state)); + WARN_ON(state == oldstate); + hctx->ccid3hctx_state = state; +} /* * Compute the initial sending rate X_init in the manner of RFC 3390: * - * X_init = min(4 * MPS, max(2 * MPS, 4380 bytes)) / RTT + * X_init = min(4 * s, max(2 * s, 4380 bytes)) / RTT * + * Note that RFC 3390 uses MSS, RFC 4342 refers to RFC 3390, and rfc3448bis + * (rev-02) clarifies the use of RFC 3390 with regard to the above formula. * For consistency with other parts of the code, X_init is scaled by 2^6. */ static inline u64 rfc3390_initial_rate(struct sock *sk) { - const u32 mps = dccp_sk(sk)->dccps_mss_cache, - w_init = clamp(4380U, 2 * mps, 4 * mps); + const struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); + const __u32 w_init = clamp_t(__u32, 4380U, + 2 * hctx->ccid3hctx_s, 4 * hctx->ccid3hctx_s); - return scaled_div(w_init << 6, ccid3_hc_tx_sk(sk)->rtt); + return scaled_div(w_init << 6, hctx->ccid3hctx_rtt); } -/** - * ccid3_update_send_interval - Calculate new t_ipi = s / X - * This respects the granularity of X (64 * bytes/second) and enforces the - * scaled minimum of s * 64 / t_mbi = `s' bytes/second as per RFC 3448/4342. +/* + * Recalculate t_ipi and delta (should be called whenever X changes) */ static void ccid3_update_send_interval(struct ccid3_hc_tx_sock *hctx) { - if (unlikely(hctx->x <= hctx->s)) - hctx->x = hctx->s; - hctx->t_ipi = scaled_div32(((u64)hctx->s) << 6, hctx->x); + /* Calculate new t_ipi = s / X_inst (X_inst is in 64 * bytes/second) */ + hctx->ccid3hctx_t_ipi = scaled_div32(((u64)hctx->ccid3hctx_s) << 6, + hctx->ccid3hctx_x); + + /* Calculate new delta by delta = min(t_ipi / 2, t_gran / 2) */ + hctx->ccid3hctx_delta = min_t(u32, hctx->ccid3hctx_t_ipi / 2, + TFRC_OPSYS_HALF_TIME_GRAN); + + ccid3_pr_debug("t_ipi=%u, delta=%u, s=%u, X=%u\n", + hctx->ccid3hctx_t_ipi, hctx->ccid3hctx_delta, + hctx->ccid3hctx_s, (unsigned)(hctx->ccid3hctx_x >> 6)); + } static u32 ccid3_hc_tx_idle_rtt(struct ccid3_hc_tx_sock *hctx, ktime_t now) { - u32 delta = ktime_us_delta(now, hctx->t_last_win_count); + u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count); - return delta / hctx->rtt; + return delta / hctx->ccid3hctx_rtt; } /** @@ -99,8 +133,8 @@ static u32 ccid3_hc_tx_idle_rtt(struct ccid3_hc_tx_sock *hctx, ktime_t now) static void ccid3_hc_tx_update_x(struct sock *sk, ktime_t *stamp) { struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); - u64 min_rate = 2 * hctx->x_recv; - const u64 old_x = hctx->x; + __u64 min_rate = 2 * hctx->ccid3hctx_x_recv; + const __u64 old_x = hctx->ccid3hctx_x; ktime_t now = stamp ? *stamp : ktime_get_real(); /* @@ -111,44 +145,50 @@ static void ccid3_hc_tx_update_x(struct sock *sk, ktime_t *stamp) */ if (ccid3_hc_tx_idle_rtt(hctx, now) >= 2) { min_rate = rfc3390_initial_rate(sk); - min_rate = max(min_rate, 2 * hctx->x_recv); + min_rate = max(min_rate, 2 * hctx->ccid3hctx_x_recv); } - if (hctx->p > 0) { + if (hctx->ccid3hctx_p > 0) { - hctx->x = min(((u64)hctx->x_calc) << 6, min_rate); + hctx->ccid3hctx_x = min(((__u64)hctx->ccid3hctx_x_calc) << 6, + min_rate); + hctx->ccid3hctx_x = max(hctx->ccid3hctx_x, + (((__u64)hctx->ccid3hctx_s) << 6) / + TFRC_T_MBI); - } else if (ktime_us_delta(now, hctx->t_ld) - (s64)hctx->rtt >= 0) { + } else if (ktime_us_delta(now, hctx->ccid3hctx_t_ld) + - (s64)hctx->ccid3hctx_rtt >= 0) { - hctx->x = min(2 * hctx->x, min_rate); - hctx->x = max(hctx->x, - scaled_div(((u64)hctx->s) << 6, hctx->rtt)); - hctx->t_ld = now; + hctx->ccid3hctx_x = min(2 * hctx->ccid3hctx_x, min_rate); + hctx->ccid3hctx_x = max(hctx->ccid3hctx_x, + scaled_div(((__u64)hctx->ccid3hctx_s) << 6, + hctx->ccid3hctx_rtt)); + hctx->ccid3hctx_t_ld = now; } - if (hctx->x != old_x) { + if (hctx->ccid3hctx_x != old_x) { ccid3_pr_debug("X_prev=%u, X_now=%u, X_calc=%u, " "X_recv=%u\n", (unsigned)(old_x >> 6), - (unsigned)(hctx->x >> 6), hctx->x_calc, - (unsigned)(hctx->x_recv >> 6)); + (unsigned)(hctx->ccid3hctx_x >> 6), + hctx->ccid3hctx_x_calc, + (unsigned)(hctx->ccid3hctx_x_recv >> 6)); ccid3_update_send_interval(hctx); } } /* - * ccid3_hc_tx_measure_packet_size - Measuring the packet size `s' (sec 4.1) - * @new_len: DCCP payload size in bytes (not used by all methods) + * Track the mean packet size `s' (cf. RFC 4342, 5.3 and RFC 3448, 4.1) + * @len: DCCP packet payload size in bytes */ -static u32 ccid3_hc_tx_measure_packet_size(struct sock *sk, const u16 new_len) +static inline void ccid3_hc_tx_update_s(struct ccid3_hc_tx_sock *hctx, int len) { -#if defined(CONFIG_IP_DCCP_CCID3_MEASURE_S_AS_AVG) - return tfrc_ewma(ccid3_hc_tx_sk(sk)->s, new_len, 9); -#elif defined(CONFIG_IP_DCCP_CCID3_MEASURE_S_AS_MAX) - return max(ccid3_hc_tx_sk(sk)->s, new_len); -#else /* CONFIG_IP_DCCP_CCID3_MEASURE_S_AS_MPS */ - return dccp_sk(sk)->dccps_mss_cache; -#endif + const u16 old_s = hctx->ccid3hctx_s; + + hctx->ccid3hctx_s = tfrc_ewma(hctx->ccid3hctx_s, len, 9); + + if (hctx->ccid3hctx_s != old_s) + ccid3_update_send_interval(hctx); } /* @@ -158,13 +198,13 @@ static u32 ccid3_hc_tx_measure_packet_size(struct sock *sk, const u16 new_len) static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx, ktime_t now) { - u32 delta = ktime_us_delta(now, hctx->t_last_win_count), - quarter_rtts = (4 * delta) / hctx->rtt; + u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count), + quarter_rtts = (4 * delta) / hctx->ccid3hctx_rtt; if (quarter_rtts > 0) { - hctx->t_last_win_count = now; - hctx->last_win_count += min(quarter_rtts, 5U); - hctx->last_win_count &= 0xF; /* mod 16 */ + hctx->ccid3hctx_t_last_win_count = now; + hctx->ccid3hctx_last_win_count += min(quarter_rtts, 5U); + hctx->ccid3hctx_last_win_count &= 0xF; /* mod 16 */ } } @@ -181,26 +221,25 @@ static void ccid3_hc_tx_no_feedback_timer(unsigned long data) goto restart_timer; } - ccid3_pr_debug("%s(%p) entry with%s feedback\n", dccp_role(sk), sk, - hctx->feedback ? "" : "out"); + ccid3_pr_debug("%s(%p, state=%s) - entry \n", dccp_role(sk), sk, + ccid3_tx_state_name(hctx->ccid3hctx_state)); - /* Ignore and do not restart after leaving the established state */ - if ((1 << sk->sk_state) & ~(DCCPF_OPEN | DCCPF_PARTOPEN)) + if (hctx->ccid3hctx_state == TFRC_SSTATE_FBACK) + ccid3_hc_tx_set_state(sk, TFRC_SSTATE_NO_FBACK); + else if (hctx->ccid3hctx_state != TFRC_SSTATE_NO_FBACK) goto out; - /* Reset feedback state to "no feedback received" */ - hctx->feedback = false; - /* * Determine new allowed sending rate X as per draft rfc3448bis-00, 4.4 - * RTO is 0 if and only if no feedback has been received yet. */ - if (hctx->t_rto == 0 || hctx->p == 0) { + if (hctx->ccid3hctx_t_rto == 0 || /* no feedback received yet */ + hctx->ccid3hctx_p == 0) { /* halve send rate directly */ - hctx->x /= 2; + hctx->ccid3hctx_x = max(hctx->ccid3hctx_x / 2, + (((__u64)hctx->ccid3hctx_s) << 6) / + TFRC_T_MBI); ccid3_update_send_interval(hctx); - } else { /* * Modify the cached value of X_recv @@ -212,41 +251,44 @@ static void ccid3_hc_tx_no_feedback_timer(unsigned long data) * * Note that X_recv is scaled by 2^6 while X_calc is not */ - BUG_ON(hctx->p && !hctx->x_calc); + BUG_ON(hctx->ccid3hctx_p && !hctx->ccid3hctx_x_calc); - if (hctx->x_calc > (hctx->x_recv >> 5)) - hctx->x_recv /= 2; + if (hctx->ccid3hctx_x_calc > (hctx->ccid3hctx_x_recv >> 5)) + hctx->ccid3hctx_x_recv = + max(hctx->ccid3hctx_x_recv / 2, + (((__u64)hctx->ccid3hctx_s) << 6) / + (2 * TFRC_T_MBI)); else { - hctx->x_recv = hctx->x_calc; - hctx->x_recv <<= 4; + hctx->ccid3hctx_x_recv = hctx->ccid3hctx_x_calc; + hctx->ccid3hctx_x_recv <<= 4; } ccid3_hc_tx_update_x(sk, NULL); } ccid3_pr_debug("Reduced X to %llu/64 bytes/sec\n", - (unsigned long long)hctx->x); + (unsigned long long)hctx->ccid3hctx_x); /* * Set new timeout for the nofeedback timer. * See comments in packet_recv() regarding the value of t_RTO. */ - if (unlikely(hctx->t_rto == 0)) /* no feedback received yet */ + if (unlikely(hctx->ccid3hctx_t_rto == 0)) /* no feedback yet */ t_nfb = TFRC_INITIAL_TIMEOUT; else - t_nfb = max(hctx->t_rto, 2 * hctx->t_ipi); + t_nfb = max(hctx->ccid3hctx_t_rto, 2 * hctx->ccid3hctx_t_ipi); restart_timer: - sk_reset_timer(sk, &hctx->no_feedback_timer, + sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer, jiffies + usecs_to_jiffies(t_nfb)); out: bh_unlock_sock(sk); sock_put(sk); } -/** - * ccid3_hc_tx_send_packet - Delay-based dequeueing of TX packets - * @skb: next packet candidate to send on @sk - * This function uses the convention of ccid_packet_dequeue_eval() and - * returns a millisecond-delay value between 0 and t_mbi = 64000 msec. +/* + * returns + * > 0: delay (in msecs) that should pass before actually sending + * = 0: can send immediately + * < 0: error condition; do not send packet */ static int ccid3_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb) { @@ -263,14 +305,18 @@ static int ccid3_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb) if (unlikely(skb->len == 0)) return -EBADMSG; - if (hctx->s == 0) { - sk_reset_timer(sk, &hctx->no_feedback_timer, (jiffies + + switch (hctx->ccid3hctx_state) { + case TFRC_SSTATE_NO_SENT: + sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer, + (jiffies + usecs_to_jiffies(TFRC_INITIAL_TIMEOUT))); - hctx->last_win_count = 0; - hctx->t_last_win_count = now; + hctx->ccid3hctx_last_win_count = 0; + hctx->ccid3hctx_t_last_win_count = now; /* Set t_0 for initial packet */ - hctx->t_nom = now; + hctx->ccid3hctx_t_nom = now; + + hctx->ccid3hctx_s = skb->len; /* * Use initial RTT sample when available: recommended by erratum @@ -279,9 +325,9 @@ static int ccid3_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb) */ if (dp->dccps_syn_rtt) { ccid3_pr_debug("SYN RTT = %uus\n", dp->dccps_syn_rtt); - hctx->rtt = dp->dccps_syn_rtt; - hctx->x = rfc3390_initial_rate(sk); - hctx->t_ld = now; + hctx->ccid3hctx_rtt = dp->dccps_syn_rtt; + hctx->ccid3hctx_x = rfc3390_initial_rate(sk); + hctx->ccid3hctx_t_ld = now; } else { /* * Sender does not have RTT sample: @@ -289,20 +335,17 @@ static int ccid3_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb) * is needed in several parts (e.g. window counter); * - set sending rate X_pps = 1pps as per RFC 3448, 4.2. */ - hctx->rtt = DCCP_FALLBACK_RTT; - hctx->x = dp->dccps_mss_cache; - hctx->x <<= 6; + hctx->ccid3hctx_rtt = DCCP_FALLBACK_RTT; + hctx->ccid3hctx_x = hctx->ccid3hctx_s; + hctx->ccid3hctx_x <<= 6; } - - /* Compute t_ipi = s / X */ - hctx->s = ccid3_hc_tx_measure_packet_size(sk, skb->len); ccid3_update_send_interval(hctx); - /* Seed value for Oscillation Prevention (sec. 4.5) */ - hctx->r_sqmean = tfrc_scaled_sqrt(hctx->rtt); - - } else { - delay = ktime_us_delta(hctx->t_nom, now); + ccid3_hc_tx_set_state(sk, TFRC_SSTATE_NO_FBACK); + break; + case TFRC_SSTATE_NO_FBACK: + case TFRC_SSTATE_FBACK: + delay = ktime_us_delta(hctx->ccid3hctx_t_nom, now); ccid3_pr_debug("delay=%ld\n", (long)delay); /* * Scheduling of packet transmissions [RFC 3448, 4.6] @@ -312,80 +355,99 @@ static int ccid3_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb) * else * // send the packet in (t_nom - t_now) milliseconds. */ - if (delay >= TFRC_T_DELTA) - return (u32)delay / USEC_PER_MSEC; + if (delay - (s64)hctx->ccid3hctx_delta >= 1000) + return (u32)delay / 1000L; ccid3_hc_tx_update_win_count(hctx, now); + break; + case TFRC_SSTATE_TERM: + DCCP_BUG("%s(%p) - Illegal state TERM", dccp_role(sk), sk); + return -EINVAL; } /* prepare to send now (add options etc.) */ dp->dccps_hc_tx_insert_options = 1; - DCCP_SKB_CB(skb)->dccpd_ccval = hctx->last_win_count; + DCCP_SKB_CB(skb)->dccpd_ccval = hctx->ccid3hctx_last_win_count; /* set the nominal send time for the next following packet */ - hctx->t_nom = ktime_add_us(hctx->t_nom, hctx->t_ipi); - return CCID_PACKET_SEND_AT_ONCE; + hctx->ccid3hctx_t_nom = ktime_add_us(hctx->ccid3hctx_t_nom, + hctx->ccid3hctx_t_ipi); + return 0; } -static void ccid3_hc_tx_packet_sent(struct sock *sk, unsigned int len) +static void ccid3_hc_tx_packet_sent(struct sock *sk, int more, + unsigned int len) { struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); - /* Changes to s will become effective the next time X is computed */ - hctx->s = ccid3_hc_tx_measure_packet_size(sk, len); + ccid3_hc_tx_update_s(hctx, len); - if (tfrc_tx_hist_add(&hctx->hist, dccp_sk(sk)->dccps_gss)) + if (tfrc_tx_hist_add(&hctx->ccid3hctx_hist, dccp_sk(sk)->dccps_gss)) DCCP_CRIT("packet history - out of memory!"); } static void ccid3_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) { struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); - struct tfrc_tx_hist_entry *acked; + struct ccid3_options_received *opt_recv; ktime_t now; unsigned long t_nfb; - u32 r_sample; + u32 pinv, r_sample; /* we are only interested in ACKs */ if (!(DCCP_SKB_CB(skb)->dccpd_type == DCCP_PKT_ACK || DCCP_SKB_CB(skb)->dccpd_type == DCCP_PKT_DATAACK)) return; - /* - * Locate the acknowledged packet in the TX history. - * - * Returning "entry not found" here can for instance happen when - * - the host has not sent out anything (e.g. a passive server), - * - the Ack is outdated (packet with higher Ack number was received), - * - it is a bogus Ack (for a packet not sent on this connection). - */ - acked = tfrc_tx_hist_find_entry(hctx->hist, dccp_hdr_ack_seq(skb)); - if (acked == NULL) + /* ... and only in the established state */ + if (hctx->ccid3hctx_state != TFRC_SSTATE_FBACK && + hctx->ccid3hctx_state != TFRC_SSTATE_NO_FBACK) + return; + + opt_recv = &hctx->ccid3hctx_options_received; + now = ktime_get_real(); + + /* Estimate RTT from history if ACK number is valid */ + r_sample = tfrc_tx_hist_rtt(hctx->ccid3hctx_hist, + DCCP_SKB_CB(skb)->dccpd_ack_seq, now); + if (r_sample == 0) { + DCCP_WARN("%s(%p): %s with bogus ACK-%llu\n", dccp_role(sk), sk, + dccp_packet_name(DCCP_SKB_CB(skb)->dccpd_type), + (unsigned long long)DCCP_SKB_CB(skb)->dccpd_ack_seq); return; - /* For the sake of RTT sampling, ignore/remove all older entries */ - tfrc_tx_hist_purge(&acked->next); + } - /* Update the moving average for the RTT estimate (RFC 3448, 4.3) */ - now = ktime_get_real(); - r_sample = dccp_sample_rtt(sk, ktime_us_delta(now, acked->stamp)); - hctx->rtt = tfrc_ewma(hctx->rtt, r_sample, 9); + /* Update receive rate in units of 64 * bytes/second */ + hctx->ccid3hctx_x_recv = opt_recv->ccid3or_receive_rate; + hctx->ccid3hctx_x_recv <<= 6; + /* Update loss event rate (which is scaled by 1e6) */ + pinv = opt_recv->ccid3or_loss_event_rate; + if (pinv == ~0U || pinv == 0) /* see RFC 4342, 8.5 */ + hctx->ccid3hctx_p = 0; + else /* can not exceed 100% */ + hctx->ccid3hctx_p = scaled_div(1, pinv); + /* + * Validate new RTT sample and update moving average + */ + r_sample = dccp_sample_rtt(sk, r_sample); + hctx->ccid3hctx_rtt = tfrc_ewma(hctx->ccid3hctx_rtt, r_sample, 9); /* * Update allowed sending rate X as per draft rfc3448bis-00, 4.2/3 */ - if (!hctx->feedback) { - hctx->feedback = true; + if (hctx->ccid3hctx_state == TFRC_SSTATE_NO_FBACK) { + ccid3_hc_tx_set_state(sk, TFRC_SSTATE_FBACK); - if (hctx->t_rto == 0) { + if (hctx->ccid3hctx_t_rto == 0) { /* * Initial feedback packet: Larger Initial Windows (4.2) */ - hctx->x = rfc3390_initial_rate(sk); - hctx->t_ld = now; + hctx->ccid3hctx_x = rfc3390_initial_rate(sk); + hctx->ccid3hctx_t_ld = now; ccid3_update_send_interval(hctx); goto done_computing_x; - } else if (hctx->p == 0) { + } else if (hctx->ccid3hctx_p == 0) { /* * First feedback after nofeedback timer expiry (4.3) */ @@ -394,52 +456,25 @@ static void ccid3_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) } /* Update sending rate (step 4 of [RFC 3448, 4.3]) */ - if (hctx->p > 0) - hctx->x_calc = tfrc_calc_x(hctx->s, hctx->rtt, hctx->p); + if (hctx->ccid3hctx_p > 0) + hctx->ccid3hctx_x_calc = + tfrc_calc_x(hctx->ccid3hctx_s, + hctx->ccid3hctx_rtt, + hctx->ccid3hctx_p); ccid3_hc_tx_update_x(sk, &now); done_computing_x: ccid3_pr_debug("%s(%p), RTT=%uus (sample=%uus), s=%u, " "p=%u, X_calc=%u, X_recv=%u, X=%u\n", - dccp_role(sk), sk, hctx->rtt, r_sample, - hctx->s, hctx->p, hctx->x_calc, - (unsigned)(hctx->x_recv >> 6), - (unsigned)(hctx->x >> 6)); - /* - * Oscillation Reduction (RFC 3448, 4.5) - modifying t_ipi according to - * RTT changes, multiplying by X/X_inst = sqrt(R_sample)/R_sqmean. This - * can be useful if few connections share a link, avoiding that buffer - * fill levels (RTT) oscillate as a result of frequent adjustments to X. - * A useful presentation with background information is in - * Joerg Widmer, "Equation-Based Congestion Control", - * MSc Thesis, University of Mannheim, Germany, 2000 - * (sec. 3.6.4), who calls this ISM ("Inter-packet Space Modulation"). - */ - if (do_osc_prev) { - r_sample = tfrc_scaled_sqrt(r_sample); - /* - * The modulation can work in both ways: increase/decrease t_ipi - * according to long-term increases/decreases of the RTT. The - * former is a useful measure, since it works against queue - * build-up. The latter temporarily increases the sending rate, - * so that buffers fill up more quickly. This in turn causes - * the RTT to increase, so that either later reduction becomes - * necessary or the RTT stays at a very high level. Decreasing - * t_ipi is therefore not supported. - * Furthermore, during the initial slow-start phase the RTT - * naturally increases, where using the algorithm would cause - * delays. Hence it is disabled during the initial slow-start. - */ - if (r_sample > hctx->r_sqmean && hctx->p > 0) - hctx->t_ipi = div_u64((u64)hctx->t_ipi * (u64)r_sample, - hctx->r_sqmean); - hctx->t_ipi = min_t(u32, hctx->t_ipi, TFRC_T_MBI); - /* update R_sqmean _after_ computing the modulation factor */ - hctx->r_sqmean = tfrc_ewma(hctx->r_sqmean, r_sample, 9); - } + dccp_role(sk), + sk, hctx->ccid3hctx_rtt, r_sample, + hctx->ccid3hctx_s, hctx->ccid3hctx_p, + hctx->ccid3hctx_x_calc, + (unsigned)(hctx->ccid3hctx_x_recv >> 6), + (unsigned)(hctx->ccid3hctx_x >> 6)); /* unschedule no feedback timer */ - sk_stop_timer(sk, &hctx->no_feedback_timer); + sk_stop_timer(sk, &hctx->ccid3hctx_no_feedback_timer); /* * As we have calculated new ipi, delta, t_nom it is possible @@ -453,66 +488,95 @@ done_computing_x: * This can help avoid triggering the nofeedback timer too * often ('spinning') on LANs with small RTTs. */ - hctx->t_rto = max_t(u32, 4 * hctx->rtt, (CONFIG_IP_DCCP_CCID3_RTO * - (USEC_PER_SEC / 1000))); + hctx->ccid3hctx_t_rto = max_t(u32, 4 * hctx->ccid3hctx_rtt, + (CONFIG_IP_DCCP_CCID3_RTO * + (USEC_PER_SEC / 1000))); /* * Schedule no feedback timer to expire in * max(t_RTO, 2 * s/X) = max(t_RTO, 2 * t_ipi) */ - t_nfb = max(hctx->t_rto, 2 * hctx->t_ipi); + t_nfb = max(hctx->ccid3hctx_t_rto, 2 * hctx->ccid3hctx_t_ipi); ccid3_pr_debug("%s(%p), Scheduled no feedback timer to " "expire in %lu jiffies (%luus)\n", - dccp_role(sk), sk, usecs_to_jiffies(t_nfb), t_nfb); + dccp_role(sk), + sk, usecs_to_jiffies(t_nfb), t_nfb); - sk_reset_timer(sk, &hctx->no_feedback_timer, + sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer, jiffies + usecs_to_jiffies(t_nfb)); } -static int ccid3_hc_tx_parse_options(struct sock *sk, u8 packet_type, - u8 option, u8 *optval, u8 optlen) +static int ccid3_hc_tx_parse_options(struct sock *sk, unsigned char option, + unsigned char len, u16 idx, + unsigned char *value) { + int rc = 0; + const struct dccp_sock *dp = dccp_sk(sk); struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); + struct ccid3_options_received *opt_recv; __be32 opt_val; - switch (option) { - case TFRC_OPT_RECEIVE_RATE: - case TFRC_OPT_LOSS_EVENT_RATE: - /* Must be ignored on Data packets, cf. RFC 4342 8.3 and 8.5 */ - if (packet_type == DCCP_PKT_DATA) - break; - if (unlikely(optlen != 4)) { - DCCP_WARN("%s(%p), invalid len %d for %u\n", - dccp_role(sk), sk, optlen, option); - return -EINVAL; - } - opt_val = ntohl(get_unaligned((__be32 *)optval)); + opt_recv = &hctx->ccid3hctx_options_received; - if (option == TFRC_OPT_RECEIVE_RATE) { - /* Receive Rate is kept in units of 64 bytes/second */ - hctx->x_recv = opt_val; - hctx->x_recv <<= 6; + if (opt_recv->ccid3or_seqno != dp->dccps_gsr) { + opt_recv->ccid3or_seqno = dp->dccps_gsr; + opt_recv->ccid3or_loss_event_rate = ~0; + opt_recv->ccid3or_loss_intervals_idx = 0; + opt_recv->ccid3or_loss_intervals_len = 0; + opt_recv->ccid3or_receive_rate = 0; + } - ccid3_pr_debug("%s(%p), RECEIVE_RATE=%u\n", - dccp_role(sk), sk, opt_val); + switch (option) { + case TFRC_OPT_LOSS_EVENT_RATE: + if (unlikely(len != 4)) { + DCCP_WARN("%s(%p), invalid len %d " + "for TFRC_OPT_LOSS_EVENT_RATE\n", + dccp_role(sk), sk, len); + rc = -EINVAL; } else { - /* Update the fixpoint Loss Event Rate fraction */ - hctx->p = tfrc_invert_loss_event_rate(opt_val); - + opt_val = get_unaligned((__be32 *)value); + opt_recv->ccid3or_loss_event_rate = ntohl(opt_val); ccid3_pr_debug("%s(%p), LOSS_EVENT_RATE=%u\n", - dccp_role(sk), sk, opt_val); + dccp_role(sk), sk, + opt_recv->ccid3or_loss_event_rate); } + break; + case TFRC_OPT_LOSS_INTERVALS: + opt_recv->ccid3or_loss_intervals_idx = idx; + opt_recv->ccid3or_loss_intervals_len = len; + ccid3_pr_debug("%s(%p), LOSS_INTERVALS=(%u, %u)\n", + dccp_role(sk), sk, + opt_recv->ccid3or_loss_intervals_idx, + opt_recv->ccid3or_loss_intervals_len); + break; + case TFRC_OPT_RECEIVE_RATE: + if (unlikely(len != 4)) { + DCCP_WARN("%s(%p), invalid len %d " + "for TFRC_OPT_RECEIVE_RATE\n", + dccp_role(sk), sk, len); + rc = -EINVAL; + } else { + opt_val = get_unaligned((__be32 *)value); + opt_recv->ccid3or_receive_rate = ntohl(opt_val); + ccid3_pr_debug("%s(%p), RECEIVE_RATE=%u\n", + dccp_role(sk), sk, + opt_recv->ccid3or_receive_rate); + } + break; } - return 0; + + return rc; } static int ccid3_hc_tx_init(struct ccid *ccid, struct sock *sk) { struct ccid3_hc_tx_sock *hctx = ccid_priv(ccid); - hctx->hist = NULL; - setup_timer(&hctx->no_feedback_timer, - ccid3_hc_tx_no_feedback_timer, (unsigned long)sk); + hctx->ccid3hctx_state = TFRC_SSTATE_NO_SENT; + hctx->ccid3hctx_hist = NULL; + setup_timer(&hctx->ccid3hctx_no_feedback_timer, + ccid3_hc_tx_no_feedback_timer, (unsigned long)sk); + return 0; } @@ -520,36 +584,42 @@ static void ccid3_hc_tx_exit(struct sock *sk) { struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); - sk_stop_timer(sk, &hctx->no_feedback_timer); - tfrc_tx_hist_purge(&hctx->hist); + ccid3_hc_tx_set_state(sk, TFRC_SSTATE_TERM); + sk_stop_timer(sk, &hctx->ccid3hctx_no_feedback_timer); + + tfrc_tx_hist_purge(&hctx->ccid3hctx_hist); } static void ccid3_hc_tx_get_info(struct sock *sk, struct tcp_info *info) { - info->tcpi_rto = ccid3_hc_tx_sk(sk)->t_rto; - info->tcpi_rtt = ccid3_hc_tx_sk(sk)->rtt; + struct ccid3_hc_tx_sock *hctx; + + /* Listen socks doesn't have a private CCID block */ + if (sk->sk_state == DCCP_LISTEN) + return; + + hctx = ccid3_hc_tx_sk(sk); + info->tcpi_rto = hctx->ccid3hctx_t_rto; + info->tcpi_rtt = hctx->ccid3hctx_rtt; } static int ccid3_hc_tx_getsockopt(struct sock *sk, const int optname, int len, u32 __user *optval, int __user *optlen) { - const struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); - struct tfrc_tx_info tfrc; + const struct ccid3_hc_tx_sock *hctx; const void *val; + /* Listen socks doesn't have a private CCID block */ + if (sk->sk_state == DCCP_LISTEN) + return -EINVAL; + + hctx = ccid3_hc_tx_sk(sk); switch (optname) { case DCCP_SOCKOPT_CCID_TX_INFO: - if (len < sizeof(tfrc)) + if (len < sizeof(hctx->ccid3hctx_tfrc)) return -EINVAL; - tfrc.tfrctx_x = hctx->x; - tfrc.tfrctx_x_recv = hctx->x_recv; - tfrc.tfrctx_x_calc = hctx->x_calc; - tfrc.tfrctx_rtt = hctx->rtt; - tfrc.tfrctx_p = hctx->p; - tfrc.tfrctx_rto = hctx->t_rto; - tfrc.tfrctx_ipi = hctx->t_ipi; - len = sizeof(tfrc); - val = &tfrc; + len = sizeof(hctx->ccid3hctx_tfrc); + val = &hctx->ccid3hctx_tfrc; break; default: return -ENOPROTOOPT; @@ -564,82 +634,112 @@ static int ccid3_hc_tx_getsockopt(struct sock *sk, const int optname, int len, /* * Receiver Half-Connection Routines */ + +/* CCID3 feedback types */ +enum ccid3_fback_type { + CCID3_FBACK_NONE = 0, + CCID3_FBACK_INITIAL, + CCID3_FBACK_PERIODIC, + CCID3_FBACK_PARAM_CHANGE +}; + +#ifdef CONFIG_IP_DCCP_CCID3_DEBUG +static const char *ccid3_rx_state_name(enum ccid3_hc_rx_states state) +{ + static char *ccid3_rx_state_names[] = { + [TFRC_RSTATE_NO_DATA] = "NO_DATA", + [TFRC_RSTATE_DATA] = "DATA", + [TFRC_RSTATE_TERM] = "TERM", + }; + + return ccid3_rx_state_names[state]; +} +#endif + +static void ccid3_hc_rx_set_state(struct sock *sk, + enum ccid3_hc_rx_states state) +{ + struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); + enum ccid3_hc_rx_states oldstate = hcrx->ccid3hcrx_state; + + ccid3_pr_debug("%s(%p) %-8.8s -> %s\n", + dccp_role(sk), sk, ccid3_rx_state_name(oldstate), + ccid3_rx_state_name(state)); + WARN_ON(state == oldstate); + hcrx->ccid3hcrx_state = state; +} + static void ccid3_hc_rx_send_feedback(struct sock *sk, const struct sk_buff *skb, enum ccid3_fback_type fbtype) { struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); + struct dccp_sock *dp = dccp_sk(sk); + ktime_t now; + s64 delta = 0; + + if (unlikely(hcrx->ccid3hcrx_state == TFRC_RSTATE_TERM)) + return; + + now = ktime_get_real(); switch (fbtype) { case CCID3_FBACK_INITIAL: - hcrx->x_recv = 0; - hcrx->p_inverse = ~0U; /* see RFC 4342, 8.5 */ + hcrx->ccid3hcrx_x_recv = 0; + hcrx->ccid3hcrx_pinv = ~0U; /* see RFC 4342, 8.5 */ break; case CCID3_FBACK_PARAM_CHANGE: - if (unlikely(hcrx->feedback == CCID3_FBACK_NONE)) { - /* - * rfc3448bis-06, 6.3.1: First packet(s) lost or marked - * FIXME: in rfc3448bis the receiver returns X_recv=0 - * here as it normally would in the first feedback packet. - * However this is not possible yet, since the code still - * uses RFC 3448, i.e. - * If (p > 0) - * Calculate X_calc using the TCP throughput equation. - * X = max(min(X_calc, 2*X_recv), s/t_mbi); - * would bring X down to s/t_mbi. That is why we return - * X_recv according to rfc3448bis-06 for the moment. - */ - u32 s = tfrc_rx_hist_packet_size(&hcrx->hist), - rtt = tfrc_rx_hist_rtt(&hcrx->hist); - - hcrx->x_recv = scaled_div32(s, 2 * rtt); - break; - } /* * When parameters change (new loss or p > p_prev), we do not * have a reliable estimate for R_m of [RFC 3448, 6.2] and so - * always check whether at least RTT time units were covered. + * need to reuse the previous value of X_recv. However, when + * X_recv was 0 (due to early loss), this would kill X down to + * s/t_mbi (i.e. one packet in 64 seconds). + * To avoid such drastic reduction, we approximate X_recv as + * the number of bytes since last feedback. + * This is a safe fallback, since X is bounded above by X_calc. */ - hcrx->x_recv = tfrc_rx_hist_x_recv(&hcrx->hist, hcrx->x_recv); - break; + if (hcrx->ccid3hcrx_x_recv > 0) + break; + /* fall through */ case CCID3_FBACK_PERIODIC: - /* - * Step (2) of rfc3448bis-06, 6.2: - * - if no data packets have been received, just restart timer - * - if data packets have been received, re-compute X_recv - */ - if (hcrx->hist.bytes_recvd == 0) - goto prepare_for_next_time; - hcrx->x_recv = tfrc_rx_hist_x_recv(&hcrx->hist, hcrx->x_recv); + delta = ktime_us_delta(now, hcrx->ccid3hcrx_tstamp_last_feedback); + if (delta <= 0) + DCCP_BUG("delta (%ld) <= 0", (long)delta); + else + hcrx->ccid3hcrx_x_recv = + scaled_div32(hcrx->ccid3hcrx_bytes_recv, delta); break; default: return; } - ccid3_pr_debug("X_recv=%u, 1/p=%u\n", hcrx->x_recv, hcrx->p_inverse); + ccid3_pr_debug("Interval %ldusec, X_recv=%u, 1/p=%u\n", (long)delta, + hcrx->ccid3hcrx_x_recv, hcrx->ccid3hcrx_pinv); - dccp_sk(sk)->dccps_hc_rx_insert_options = 1; - dccp_send_ack(sk); + hcrx->ccid3hcrx_tstamp_last_feedback = now; + hcrx->ccid3hcrx_last_counter = dccp_hdr(skb)->dccph_ccval; + hcrx->ccid3hcrx_bytes_recv = 0; -prepare_for_next_time: - tfrc_rx_hist_restart_byte_counter(&hcrx->hist); - hcrx->last_counter = dccp_hdr(skb)->dccph_ccval; - hcrx->feedback = fbtype; + dp->dccps_hc_rx_insert_options = 1; + dccp_send_ack(sk); } static int ccid3_hc_rx_insert_options(struct sock *sk, struct sk_buff *skb) { - const struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); + const struct ccid3_hc_rx_sock *hcrx; __be32 x_recv, pinv; if (!(sk->sk_state == DCCP_OPEN || sk->sk_state == DCCP_PARTOPEN)) return 0; + hcrx = ccid3_hc_rx_sk(sk); + if (dccp_packet_without_ack(skb)) return 0; - x_recv = htonl(hcrx->x_recv); - pinv = htonl(hcrx->p_inverse); + x_recv = htonl(hcrx->ccid3hcrx_x_recv); + pinv = htonl(hcrx->ccid3hcrx_pinv); if (dccp_insert_option(sk, skb, TFRC_OPT_LOSS_EVENT_RATE, &pinv, sizeof(pinv)) || @@ -662,95 +762,171 @@ static int ccid3_hc_rx_insert_options(struct sock *sk, struct sk_buff *skb) static u32 ccid3_first_li(struct sock *sk) { struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); - u32 s = tfrc_rx_hist_packet_size(&hcrx->hist), - rtt = tfrc_rx_hist_rtt(&hcrx->hist), x_recv, p; + u32 x_recv, p, delta; u64 fval; - /* - * rfc3448bis-06, 6.3.1: First data packet(s) are marked or lost. Set p - * to give the equivalent of X_target = s/(2*R). Thus fval = 2 and so p - * is about 20.64%. This yields an interval length of 4.84 (rounded up). - */ - if (unlikely(hcrx->feedback == CCID3_FBACK_NONE)) - return 5; + if (hcrx->ccid3hcrx_rtt == 0) { + DCCP_WARN("No RTT estimate available, using fallback RTT\n"); + hcrx->ccid3hcrx_rtt = DCCP_FALLBACK_RTT; + } - x_recv = tfrc_rx_hist_x_recv(&hcrx->hist, hcrx->x_recv); - if (x_recv == 0) - goto failed; + delta = ktime_to_us(net_timedelta(hcrx->ccid3hcrx_tstamp_last_feedback)); + x_recv = scaled_div32(hcrx->ccid3hcrx_bytes_recv, delta); + if (x_recv == 0) { /* would also trigger divide-by-zero */ + DCCP_WARN("X_recv==0\n"); + if ((x_recv = hcrx->ccid3hcrx_x_recv) == 0) { + DCCP_BUG("stored value of X_recv is zero"); + return ~0U; + } + } - fval = scaled_div32(scaled_div(s, rtt), x_recv); + fval = scaled_div(hcrx->ccid3hcrx_s, hcrx->ccid3hcrx_rtt); + fval = scaled_div32(fval, x_recv); p = tfrc_calc_x_reverse_lookup(fval); ccid3_pr_debug("%s(%p), receive rate=%u bytes/s, implied " "loss rate=%u\n", dccp_role(sk), sk, x_recv, p); - if (p > 0) - return scaled_div(1, p); -failed: - return UINT_MAX; + return p == 0 ? ~0U : scaled_div(1, p); } static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) { struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); + enum ccid3_fback_type do_feedback = CCID3_FBACK_NONE; const u64 ndp = dccp_sk(sk)->dccps_options_received.dccpor_ndp; const bool is_data_packet = dccp_data_packet(skb); + if (unlikely(hcrx->ccid3hcrx_state == TFRC_RSTATE_NO_DATA)) { + if (is_data_packet) { + const u32 payload = skb->len - dccp_hdr(skb)->dccph_doff * 4; + do_feedback = CCID3_FBACK_INITIAL; + ccid3_hc_rx_set_state(sk, TFRC_RSTATE_DATA); + hcrx->ccid3hcrx_s = payload; + /* + * Not necessary to update ccid3hcrx_bytes_recv here, + * since X_recv = 0 for the first feedback packet (cf. + * RFC 3448, 6.3) -- gerrit + */ + } + goto update_records; + } + + if (tfrc_rx_hist_duplicate(&hcrx->ccid3hcrx_hist, skb)) + return; /* done receiving */ + + if (is_data_packet) { + const u32 payload = skb->len - dccp_hdr(skb)->dccph_doff * 4; + /* + * Update moving-average of s and the sum of received payload bytes + */ + hcrx->ccid3hcrx_s = tfrc_ewma(hcrx->ccid3hcrx_s, payload, 9); + hcrx->ccid3hcrx_bytes_recv += payload; + } + /* * Perform loss detection and handle pending losses */ - if (tfrc_rx_congestion_event(&hcrx->hist, &hcrx->li_hist, - skb, ndp, ccid3_first_li, sk)) - ccid3_hc_rx_send_feedback(sk, skb, CCID3_FBACK_PARAM_CHANGE); + if (tfrc_rx_handle_loss(&hcrx->ccid3hcrx_hist, &hcrx->ccid3hcrx_li_hist, + skb, ndp, ccid3_first_li, sk)) { + do_feedback = CCID3_FBACK_PARAM_CHANGE; + goto done_receiving; + } + + if (tfrc_rx_hist_loss_pending(&hcrx->ccid3hcrx_hist)) + return; /* done receiving */ + /* - * Feedback for first non-empty data packet (RFC 3448, 6.3) + * Handle data packets: RTT sampling and monitoring p */ - else if (unlikely(hcrx->feedback == CCID3_FBACK_NONE && is_data_packet)) - ccid3_hc_rx_send_feedback(sk, skb, CCID3_FBACK_INITIAL); + if (unlikely(!is_data_packet)) + goto update_records; + + if (!tfrc_lh_is_initialised(&hcrx->ccid3hcrx_li_hist)) { + const u32 sample = tfrc_rx_hist_sample_rtt(&hcrx->ccid3hcrx_hist, skb); + /* + * Empty loss history: no loss so far, hence p stays 0. + * Sample RTT values, since an RTT estimate is required for the + * computation of p when the first loss occurs; RFC 3448, 6.3.1. + */ + if (sample != 0) + hcrx->ccid3hcrx_rtt = tfrc_ewma(hcrx->ccid3hcrx_rtt, sample, 9); + + } else if (tfrc_lh_update_i_mean(&hcrx->ccid3hcrx_li_hist, skb)) { + /* + * Step (3) of [RFC 3448, 6.1]: Recompute I_mean and, if I_mean + * has decreased (resp. p has increased), send feedback now. + */ + do_feedback = CCID3_FBACK_PARAM_CHANGE; + } + /* * Check if the periodic once-per-RTT feedback is due; RFC 4342, 10.3 */ - else if (!tfrc_rx_hist_loss_pending(&hcrx->hist) && is_data_packet && - SUB16(dccp_hdr(skb)->dccph_ccval, hcrx->last_counter) > 3) - ccid3_hc_rx_send_feedback(sk, skb, CCID3_FBACK_PERIODIC); + if (SUB16(dccp_hdr(skb)->dccph_ccval, hcrx->ccid3hcrx_last_counter) > 3) + do_feedback = CCID3_FBACK_PERIODIC; + +update_records: + tfrc_rx_hist_add_packet(&hcrx->ccid3hcrx_hist, skb, ndp); + +done_receiving: + if (do_feedback) + ccid3_hc_rx_send_feedback(sk, skb, do_feedback); } static int ccid3_hc_rx_init(struct ccid *ccid, struct sock *sk) { struct ccid3_hc_rx_sock *hcrx = ccid_priv(ccid); - tfrc_lh_init(&hcrx->li_hist); - return tfrc_rx_hist_init(&hcrx->hist, sk); + hcrx->ccid3hcrx_state = TFRC_RSTATE_NO_DATA; + tfrc_lh_init(&hcrx->ccid3hcrx_li_hist); + return tfrc_rx_hist_alloc(&hcrx->ccid3hcrx_hist); } static void ccid3_hc_rx_exit(struct sock *sk) { struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); - tfrc_rx_hist_purge(&hcrx->hist); - tfrc_lh_cleanup(&hcrx->li_hist); + ccid3_hc_rx_set_state(sk, TFRC_RSTATE_TERM); + + tfrc_rx_hist_purge(&hcrx->ccid3hcrx_hist); + tfrc_lh_cleanup(&hcrx->ccid3hcrx_li_hist); } static void ccid3_hc_rx_get_info(struct sock *sk, struct tcp_info *info) { + const struct ccid3_hc_rx_sock *hcrx; + + /* Listen socks doesn't have a private CCID block */ + if (sk->sk_state == DCCP_LISTEN) + return; + + hcrx = ccid3_hc_rx_sk(sk); + info->tcpi_ca_state = hcrx->ccid3hcrx_state; info->tcpi_options |= TCPI_OPT_TIMESTAMPS; - info->tcpi_rcv_rtt = tfrc_rx_hist_rtt(&ccid3_hc_rx_sk(sk)->hist); + info->tcpi_rcv_rtt = hcrx->ccid3hcrx_rtt; } static int ccid3_hc_rx_getsockopt(struct sock *sk, const int optname, int len, u32 __user *optval, int __user *optlen) { - const struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); + const struct ccid3_hc_rx_sock *hcrx; struct tfrc_rx_info rx_info; const void *val; + /* Listen socks doesn't have a private CCID block */ + if (sk->sk_state == DCCP_LISTEN) + return -EINVAL; + + hcrx = ccid3_hc_rx_sk(sk); switch (optname) { case DCCP_SOCKOPT_CCID_RX_INFO: if (len < sizeof(rx_info)) return -EINVAL; - rx_info.tfrcrx_x_recv = hcrx->x_recv; - rx_info.tfrcrx_rtt = tfrc_rx_hist_rtt(&hcrx->hist); - rx_info.tfrcrx_p = tfrc_invert_loss_event_rate(hcrx->p_inverse); + rx_info.tfrcrx_x_recv = hcrx->ccid3hcrx_x_recv; + rx_info.tfrcrx_rtt = hcrx->ccid3hcrx_rtt; + rx_info.tfrcrx_p = hcrx->ccid3hcrx_pinv == 0 ? ~0U : + scaled_div(1, hcrx->ccid3hcrx_pinv); len = sizeof(rx_info); val = &rx_info; break; @@ -786,9 +962,6 @@ static struct ccid_operations ccid3 = { .ccid_hc_tx_getsockopt = ccid3_hc_tx_getsockopt, }; -module_param(do_osc_prev, bool, 0644); -MODULE_PARM_DESC(do_osc_prev, "Use Oscillation Prevention (RFC 3448, 4.5)"); - #ifdef CONFIG_IP_DCCP_CCID3_DEBUG module_param(ccid3_debug, bool, 0644); MODULE_PARM_DESC(ccid3_debug, "Enable debug messages"); @@ -796,19 +969,6 @@ MODULE_PARM_DESC(ccid3_debug, "Enable debug messages"); static __init int ccid3_module_init(void) { - struct timespec tp; - - /* - * Without a fine-grained clock resolution, RTTs/X_recv are not sampled - * correctly and feedback is sent either too early or too late. - */ - hrtimer_get_res(CLOCK_MONOTONIC, &tp); - if (tp.tv_sec || tp.tv_nsec > DCCP_TIME_RESOLUTION * NSEC_PER_USEC) { - printk(KERN_ERR "%s: Timer too coarse (%ld usec), need %u-usec" - " resolution - check your clocksource.\n", __func__, - tp.tv_nsec/NSEC_PER_USEC, DCCP_TIME_RESOLUTION); - return -ESOCKTNOSUPPORT; - } return ccid_register(&ccid3); } module_init(ccid3_module_init); diff --git a/net/dccp/ccids/ccid3.h b/net/dccp/ccids/ccid3.h index af6e1bf937d..49ca32bd7e7 100644 --- a/net/dccp/ccids/ccid3.h +++ b/net/dccp/ccids/ccid3.h @@ -47,22 +47,11 @@ /* Two seconds as per RFC 3448 4.2 */ #define TFRC_INITIAL_TIMEOUT (2 * USEC_PER_SEC) -/* Maximum backoff interval t_mbi (RFC 3448, 4.3) */ -#define TFRC_T_MBI (64 * USEC_PER_SEC) +/* In usecs - half the scheduling granularity as per RFC3448 4.6 */ +#define TFRC_OPSYS_HALF_TIME_GRAN (USEC_PER_SEC / (2 * HZ)) -/* - * The t_delta parameter (RFC 3448, 4.6): delays of less than %USEC_PER_MSEC are - * rounded down to 0, since sk_reset_timer() here uses millisecond granularity. - * Hence we can use a constant t_delta = %USEC_PER_MSEC when HZ >= 500. A coarse - * resolution of HZ < 500 means that the error is below one timer tick (t_gran) - * when using the constant t_delta = t_gran / 2 = %USEC_PER_SEC / (2 * HZ). - */ -#if (HZ >= 500) -# define TFRC_T_DELTA USEC_PER_MSEC -#else -# define TFRC_T_DELTA (USEC_PER_SEC / (2 * HZ)) -#warning Coarse CONFIG_HZ resolution -- higher value recommended for TFRC. -#endif +/* Parameter t_mbi from [RFC 3448, 4.3]: backoff interval in seconds */ +#define TFRC_T_MBI 64 enum ccid3_options { TFRC_OPT_LOSS_EVENT_RATE = 192, @@ -70,43 +59,62 @@ enum ccid3_options { TFRC_OPT_RECEIVE_RATE = 194, }; +struct ccid3_options_received { + u64 ccid3or_seqno:48, + ccid3or_loss_intervals_idx:16; + u16 ccid3or_loss_intervals_len; + u32 ccid3or_loss_event_rate; + u32 ccid3or_receive_rate; +}; + +/* TFRC sender states */ +enum ccid3_hc_tx_states { + TFRC_SSTATE_NO_SENT = 1, + TFRC_SSTATE_NO_FBACK, + TFRC_SSTATE_FBACK, + TFRC_SSTATE_TERM, +}; + /** struct ccid3_hc_tx_sock - CCID3 sender half-connection socket * - * @x - Current sending rate in 64 * bytes per second - * @x_recv - Receive rate in 64 * bytes per second - * @x_calc - Calculated rate in bytes per second - * @rtt - Estimate of current round trip time in usecs - * @r_sqmean - Estimate of long-term RTT (RFC 3448, 4.5) - * @p - Current loss event rate (0-1) scaled by 1000000 - * @s - Packet size in bytes - * @t_rto - Nofeedback Timer setting in usecs - * @t_ipi - Interpacket (send) interval (RFC 3448, 4.6) in usecs - * @feedback - Whether feedback has been received or not - * @last_win_count - Last window counter sent - * @t_last_win_count - Timestamp of earliest packet with - * last_win_count value sent - * @no_feedback_timer - Handle to no feedback timer - * @t_ld - Time last doubled during slow start - * @t_nom - Nominal send time of next packet - * @hist - Packet history + * @ccid3hctx_x - Current sending rate in 64 * bytes per second + * @ccid3hctx_x_recv - Receive rate in 64 * bytes per second + * @ccid3hctx_x_calc - Calculated rate in bytes per second + * @ccid3hctx_rtt - Estimate of current round trip time in usecs + * @ccid3hctx_p - Current loss event rate (0-1) scaled by 1000000 + * @ccid3hctx_s - Packet size in bytes + * @ccid3hctx_t_rto - Nofeedback Timer setting in usecs + * @ccid3hctx_t_ipi - Interpacket (send) interval (RFC 3448, 4.6) in usecs + * @ccid3hctx_state - Sender state, one of %ccid3_hc_tx_states + * @ccid3hctx_last_win_count - Last window counter sent + * @ccid3hctx_t_last_win_count - Timestamp of earliest packet + * with last_win_count value sent + * @ccid3hctx_no_feedback_timer - Handle to no feedback timer + * @ccid3hctx_t_ld - Time last doubled during slow start + * @ccid3hctx_t_nom - Nominal send time of next packet + * @ccid3hctx_delta - Send timer delta (RFC 3448, 4.6) in usecs + * @ccid3hctx_hist - Packet history + * @ccid3hctx_options_received - Parsed set of retrieved options */ struct ccid3_hc_tx_sock { - u64 x; - u64 x_recv; - u32 x_calc; - u32 rtt; - u16 r_sqmean; - u32 p; - u32 t_rto; - u32 t_ipi; - u16 s; - bool feedback:1; - u8 last_win_count; - ktime_t t_last_win_count; - struct timer_list no_feedback_timer; - ktime_t t_ld; - ktime_t t_nom; - struct tfrc_tx_hist_entry *hist; + struct tfrc_tx_info ccid3hctx_tfrc; +#define ccid3hctx_x ccid3hctx_tfrc.tfrctx_x +#define ccid3hctx_x_recv ccid3hctx_tfrc.tfrctx_x_recv +#define ccid3hctx_x_calc ccid3hctx_tfrc.tfrctx_x_calc +#define ccid3hctx_rtt ccid3hctx_tfrc.tfrctx_rtt +#define ccid3hctx_p ccid3hctx_tfrc.tfrctx_p +#define ccid3hctx_t_rto ccid3hctx_tfrc.tfrctx_rto +#define ccid3hctx_t_ipi ccid3hctx_tfrc.tfrctx_ipi + u16 ccid3hctx_s; + enum ccid3_hc_tx_states ccid3hctx_state:8; + u8 ccid3hctx_last_win_count; + ktime_t ccid3hctx_t_last_win_count; + struct timer_list ccid3hctx_no_feedback_timer; + ktime_t ccid3hctx_t_ld; + ktime_t ccid3hctx_t_nom; + u32 ccid3hctx_delta; + struct tfrc_tx_hist_entry *ccid3hctx_hist; + struct ccid3_options_received ccid3hctx_options_received; }; static inline struct ccid3_hc_tx_sock *ccid3_hc_tx_sk(const struct sock *sk) @@ -116,32 +124,41 @@ static inline struct ccid3_hc_tx_sock *ccid3_hc_tx_sk(const struct sock *sk) return hctx; } - -enum ccid3_fback_type { - CCID3_FBACK_NONE = 0, - CCID3_FBACK_INITIAL, - CCID3_FBACK_PERIODIC, - CCID3_FBACK_PARAM_CHANGE +/* TFRC receiver states */ +enum ccid3_hc_rx_states { + TFRC_RSTATE_NO_DATA = 1, + TFRC_RSTATE_DATA, + TFRC_RSTATE_TERM = 127, }; /** struct ccid3_hc_rx_sock - CCID3 receiver half-connection socket * - * @last_counter - Tracks window counter (RFC 4342, 8.1) - * @feedback - The type of the feedback last sent - * @x_recv - Receiver estimate of send rate (RFC 3448, sec. 4.3) - * @tstamp_last_feedback - Time at which last feedback was sent - * @hist - Packet history (loss detection + RTT sampling) - * @li_hist - Loss Interval database - * @p_inverse - Inverse of Loss Event Rate (RFC 4342, sec. 8.5) + * @ccid3hcrx_x_recv - Receiver estimate of send rate (RFC 3448 4.3) + * @ccid3hcrx_rtt - Receiver estimate of rtt (non-standard) + * @ccid3hcrx_p - Current loss event rate (RFC 3448 5.4) + * @ccid3hcrx_last_counter - Tracks window counter (RFC 4342, 8.1) + * @ccid3hcrx_state - Receiver state, one of %ccid3_hc_rx_states + * @ccid3hcrx_bytes_recv - Total sum of DCCP payload bytes + * @ccid3hcrx_x_recv - Receiver estimate of send rate (RFC 3448, sec. 4.3) + * @ccid3hcrx_rtt - Receiver estimate of RTT + * @ccid3hcrx_tstamp_last_feedback - Time at which last feedback was sent + * @ccid3hcrx_tstamp_last_ack - Time at which last feedback was sent + * @ccid3hcrx_hist - Packet history (loss detection + RTT sampling) + * @ccid3hcrx_li_hist - Loss Interval database + * @ccid3hcrx_s - Received packet size in bytes + * @ccid3hcrx_pinv - Inverse of Loss Event Rate (RFC 4342, sec. 8.5) */ struct ccid3_hc_rx_sock { - u8 last_counter:4; - enum ccid3_fback_type feedback:4; - u32 x_recv; - ktime_t tstamp_last_feedback; - struct tfrc_rx_hist hist; - struct tfrc_loss_hist li_hist; -#define p_inverse li_hist.i_mean + u8 ccid3hcrx_last_counter:4; + enum ccid3_hc_rx_states ccid3hcrx_state:8; + u32 ccid3hcrx_bytes_recv; + u32 ccid3hcrx_x_recv; + u32 ccid3hcrx_rtt; + ktime_t ccid3hcrx_tstamp_last_feedback; + struct tfrc_rx_hist ccid3hcrx_hist; + struct tfrc_loss_hist ccid3hcrx_li_hist; + u16 ccid3hcrx_s; +#define ccid3hcrx_pinv ccid3hcrx_li_hist.i_mean }; static inline struct ccid3_hc_rx_sock *ccid3_hc_rx_sk(const struct sock *sk) diff --git a/net/dccp/ccids/lib/loss_interval.c b/net/dccp/ccids/lib/loss_interval.c index b1ae8f8259e..5b3ce0688c5 100644 --- a/net/dccp/ccids/lib/loss_interval.c +++ b/net/dccp/ccids/lib/loss_interval.c @@ -86,26 +86,21 @@ static void tfrc_lh_calc_i_mean(struct tfrc_loss_hist *lh) /** * tfrc_lh_update_i_mean - Update the `open' loss interval I_0 - * This updates I_mean as the sequence numbers increase. As a consequence, the - * open loss interval I_0 increases, hence p = W_tot/max(I_tot0, I_tot1) - * decreases, and thus there is no need to send renewed feedback. + * For recomputing p: returns `true' if p > p_prev <=> 1/p < 1/p_prev */ -void tfrc_lh_update_i_mean(struct tfrc_loss_hist *lh, struct sk_buff *skb) +u8 tfrc_lh_update_i_mean(struct tfrc_loss_hist *lh, struct sk_buff *skb) { struct tfrc_loss_interval *cur = tfrc_lh_peek(lh); + u32 old_i_mean = lh->i_mean; s64 len; if (cur == NULL) /* not initialised */ - return; - - /* FIXME: should probably also count non-data packets (RFC 4342, 6.1) */ - if (!dccp_data_packet(skb)) - return; + return 0; len = dccp_delta_seqno(cur->li_seqno, DCCP_SKB_CB(skb)->dccpd_seq) + 1; if (len - (s64)cur->li_length <= 0) /* duplicate or reordered */ - return; + return 0; if (SUB16(dccp_hdr(skb)->dccph_ccval, cur->li_ccval) > 4) /* @@ -119,11 +114,14 @@ void tfrc_lh_update_i_mean(struct tfrc_loss_hist *lh, struct sk_buff *skb) cur->li_is_closed = 1; if (tfrc_lh_length(lh) == 1) /* due to RFC 3448, 6.3.1 */ - return; + return 0; cur->li_length = len; tfrc_lh_calc_i_mean(lh); + + return (lh->i_mean < old_i_mean); } +EXPORT_SYMBOL_GPL(tfrc_lh_update_i_mean); /* Determine if `new_loss' does begin a new loss interval [RFC 4342, 10.2] */ static inline u8 tfrc_lh_is_new_loss(struct tfrc_loss_interval *cur, @@ -140,18 +138,18 @@ static inline u8 tfrc_lh_is_new_loss(struct tfrc_loss_interval *cur, * @sk: Used by @calc_first_li in caller-specific way (subtyping) * Updates I_mean and returns 1 if a new interval has in fact been added to @lh. */ -bool tfrc_lh_interval_add(struct tfrc_loss_hist *lh, struct tfrc_rx_hist *rh, - u32 (*calc_first_li)(struct sock *), struct sock *sk) +int tfrc_lh_interval_add(struct tfrc_loss_hist *lh, struct tfrc_rx_hist *rh, + u32 (*calc_first_li)(struct sock *), struct sock *sk) { struct tfrc_loss_interval *cur = tfrc_lh_peek(lh), *new; if (cur != NULL && !tfrc_lh_is_new_loss(cur, tfrc_rx_hist_loss_prev(rh))) - return false; + return 0; new = tfrc_lh_demand_next(lh); if (unlikely(new == NULL)) { DCCP_CRIT("Cannot allocate/add loss record."); - return false; + return 0; } new->li_seqno = tfrc_rx_hist_loss_prev(rh)->tfrchrx_seqno; @@ -169,7 +167,7 @@ bool tfrc_lh_interval_add(struct tfrc_loss_hist *lh, struct tfrc_rx_hist *rh, tfrc_lh_calc_i_mean(lh); } - return true; + return 1; } EXPORT_SYMBOL_GPL(tfrc_lh_interval_add); diff --git a/net/dccp/ccids/lib/loss_interval.h b/net/dccp/ccids/lib/loss_interval.h index d08a226db43..246018a3b26 100644 --- a/net/dccp/ccids/lib/loss_interval.h +++ b/net/dccp/ccids/lib/loss_interval.h @@ -67,9 +67,9 @@ static inline u8 tfrc_lh_length(struct tfrc_loss_hist *lh) struct tfrc_rx_hist; -extern bool tfrc_lh_interval_add(struct tfrc_loss_hist *, struct tfrc_rx_hist *, +extern int tfrc_lh_interval_add(struct tfrc_loss_hist *, struct tfrc_rx_hist *, u32 (*first_li)(struct sock *), struct sock *); -extern void tfrc_lh_update_i_mean(struct tfrc_loss_hist *lh, struct sk_buff *); +extern u8 tfrc_lh_update_i_mean(struct tfrc_loss_hist *lh, struct sk_buff *); extern void tfrc_lh_cleanup(struct tfrc_loss_hist *lh); #endif /* _DCCP_LI_HIST_ */ diff --git a/net/dccp/ccids/lib/packet_history.c b/net/dccp/ccids/lib/packet_history.c index cce9f03bda3..6cc108afdc3 100644 --- a/net/dccp/ccids/lib/packet_history.c +++ b/net/dccp/ccids/lib/packet_history.c @@ -40,6 +40,18 @@ #include "packet_history.h" #include "../../dccp.h" +/** + * tfrc_tx_hist_entry - Simple singly-linked TX history list + * @next: next oldest entry (LIFO order) + * @seqno: sequence number of this entry + * @stamp: send time of packet with sequence number @seqno + */ +struct tfrc_tx_hist_entry { + struct tfrc_tx_hist_entry *next; + u64 seqno; + ktime_t stamp; +}; + /* * Transmitter History Routines */ @@ -61,6 +73,15 @@ void tfrc_tx_packet_history_exit(void) } } +static struct tfrc_tx_hist_entry * + tfrc_tx_hist_find_entry(struct tfrc_tx_hist_entry *head, u64 seqno) +{ + while (head != NULL && head->seqno != seqno) + head = head->next; + + return head; +} + int tfrc_tx_hist_add(struct tfrc_tx_hist_entry **headp, u64 seqno) { struct tfrc_tx_hist_entry *entry = kmem_cache_alloc(tfrc_tx_hist_slab, gfp_any()); @@ -90,6 +111,25 @@ void tfrc_tx_hist_purge(struct tfrc_tx_hist_entry **headp) } EXPORT_SYMBOL_GPL(tfrc_tx_hist_purge); +u32 tfrc_tx_hist_rtt(struct tfrc_tx_hist_entry *head, const u64 seqno, + const ktime_t now) +{ + u32 rtt = 0; + struct tfrc_tx_hist_entry *packet = tfrc_tx_hist_find_entry(head, seqno); + + if (packet != NULL) { + rtt = ktime_us_delta(now, packet->stamp); + /* + * Garbage-collect older (irrelevant) entries: + */ + tfrc_tx_hist_purge(&packet->next); + } + + return rtt; +} +EXPORT_SYMBOL_GPL(tfrc_tx_hist_rtt); + + /* * Receiver History Routines */ @@ -151,31 +191,14 @@ int tfrc_rx_hist_duplicate(struct tfrc_rx_hist *h, struct sk_buff *skb) } EXPORT_SYMBOL_GPL(tfrc_rx_hist_duplicate); - -static void __tfrc_rx_hist_swap(struct tfrc_rx_hist *h, const u8 a, const u8 b) -{ - struct tfrc_rx_hist_entry *tmp = h->ring[a]; - - h->ring[a] = h->ring[b]; - h->ring[b] = tmp; -} - static void tfrc_rx_hist_swap(struct tfrc_rx_hist *h, const u8 a, const u8 b) { - __tfrc_rx_hist_swap(h, tfrc_rx_hist_index(h, a), - tfrc_rx_hist_index(h, b)); -} + const u8 idx_a = tfrc_rx_hist_index(h, a), + idx_b = tfrc_rx_hist_index(h, b); + struct tfrc_rx_hist_entry *tmp = h->ring[idx_a]; -/** - * tfrc_rx_hist_resume_rtt_sampling - Prepare RX history for RTT sampling - * This is called after loss detection has finished, when the history entry - * with the index of `loss_count' holds the highest-received sequence number. - * RTT sampling requires this information at ring[0] (tfrc_rx_hist_sample_rtt). - */ -static inline void tfrc_rx_hist_resume_rtt_sampling(struct tfrc_rx_hist *h) -{ - __tfrc_rx_hist_swap(h, 0, tfrc_rx_hist_index(h, h->loss_count)); - h->loss_count = h->loss_start = 0; + h->ring[idx_a] = h->ring[idx_b]; + h->ring[idx_b] = tmp; } /* @@ -192,8 +215,10 @@ static void __do_track_loss(struct tfrc_rx_hist *h, struct sk_buff *skb, u64 n1) u64 s0 = tfrc_rx_hist_loss_prev(h)->tfrchrx_seqno, s1 = DCCP_SKB_CB(skb)->dccpd_seq; - if (!dccp_loss_free(s0, s1, n1)) /* gap between S0 and S1 */ + if (!dccp_loss_free(s0, s1, n1)) { /* gap between S0 and S1 */ h->loss_count = 1; + tfrc_rx_hist_entry_from_skb(tfrc_rx_hist_entry(h, 1), skb, n1); + } } static void __one_after_loss(struct tfrc_rx_hist *h, struct sk_buff *skb, u32 n2) @@ -215,7 +240,8 @@ static void __one_after_loss(struct tfrc_rx_hist *h, struct sk_buff *skb, u32 n2 if (dccp_loss_free(s2, s1, n1)) { /* hole is filled: S0, S2, and S1 are consecutive */ - tfrc_rx_hist_resume_rtt_sampling(h); + h->loss_count = 0; + h->loss_start = tfrc_rx_hist_index(h, 1); } else /* gap between S2 and S1: just update loss_prev */ tfrc_rx_hist_entry_from_skb(tfrc_rx_hist_loss_prev(h), skb, n2); @@ -268,7 +294,8 @@ static int __two_after_loss(struct tfrc_rx_hist *h, struct sk_buff *skb, u32 n3) if (dccp_loss_free(s1, s2, n2)) { /* entire hole filled by S0, S3, S1, S2 */ - tfrc_rx_hist_resume_rtt_sampling(h); + h->loss_start = tfrc_rx_hist_index(h, 2); + h->loss_count = 0; } else { /* gap remains between S1 and S2 */ h->loss_start = tfrc_rx_hist_index(h, 1); @@ -312,7 +339,8 @@ static void __three_after_loss(struct tfrc_rx_hist *h) if (dccp_loss_free(s2, s3, n3)) { /* no gap between S2 and S3: entire hole is filled */ - tfrc_rx_hist_resume_rtt_sampling(h); + h->loss_start = tfrc_rx_hist_index(h, 3); + h->loss_count = 0; } else { /* gap between S2 and S3 */ h->loss_start = tfrc_rx_hist_index(h, 2); @@ -326,13 +354,13 @@ static void __three_after_loss(struct tfrc_rx_hist *h) } /** - * tfrc_rx_congestion_event - Loss detection and further processing - * @h: The non-empty RX history object - * @lh: Loss Intervals database to update - * @skb: Currently received packet - * @ndp: The NDP count belonging to @skb - * @first_li: Caller-dependent computation of first loss interval in @lh - * @sk: Used by @calc_first_li (see tfrc_lh_interval_add) + * tfrc_rx_handle_loss - Loss detection and further processing + * @h: The non-empty RX history object + * @lh: Loss Intervals database to update + * @skb: Currently received packet + * @ndp: The NDP count belonging to @skb + * @calc_first_li: Caller-dependent computation of first loss interval in @lh + * @sk: Used by @calc_first_li (see tfrc_lh_interval_add) * Chooses action according to pending loss, updates LI database when a new * loss was detected, and does required post-processing. Returns 1 when caller * should send feedback, 0 otherwise. @@ -340,20 +368,15 @@ static void __three_after_loss(struct tfrc_rx_hist *h) * records accordingly, the caller should not perform any more RX history * operations when loss_count is greater than 0 after calling this function. */ -bool tfrc_rx_congestion_event(struct tfrc_rx_hist *h, - struct tfrc_loss_hist *lh, - struct sk_buff *skb, const u64 ndp, - u32 (*first_li)(struct sock *), struct sock *sk) +int tfrc_rx_handle_loss(struct tfrc_rx_hist *h, + struct tfrc_loss_hist *lh, + struct sk_buff *skb, const u64 ndp, + u32 (*calc_first_li)(struct sock *), struct sock *sk) { - bool new_event = false; - - if (tfrc_rx_hist_duplicate(h, skb)) - return 0; + int is_new_loss = 0; if (h->loss_count == 0) { __do_track_loss(h, skb, ndp); - tfrc_rx_hist_sample_rtt(h, skb); - tfrc_rx_hist_add_packet(h, skb, ndp); } else if (h->loss_count == 1) { __one_after_loss(h, skb, ndp); } else if (h->loss_count != 2) { @@ -362,57 +385,34 @@ bool tfrc_rx_congestion_event(struct tfrc_rx_hist *h, /* * Update Loss Interval database and recycle RX records */ - new_event = tfrc_lh_interval_add(lh, h, first_li, sk); + is_new_loss = tfrc_lh_interval_add(lh, h, calc_first_li, sk); __three_after_loss(h); } - - /* - * Update moving-average of `s' and the sum of received payload bytes. - */ - if (dccp_data_packet(skb)) { - const u32 payload = skb->len - dccp_hdr(skb)->dccph_doff * 4; - - h->packet_size = tfrc_ewma(h->packet_size, payload, 9); - h->bytes_recvd += payload; - } - - /* RFC 3448, 6.1: update I_0, whose growth implies p <= p_prev */ - if (!new_event) - tfrc_lh_update_i_mean(lh, skb); - - return new_event; + return is_new_loss; } -EXPORT_SYMBOL_GPL(tfrc_rx_congestion_event); +EXPORT_SYMBOL_GPL(tfrc_rx_handle_loss); -/* Compute the sending rate X_recv measured between feedback intervals */ -u32 tfrc_rx_hist_x_recv(struct tfrc_rx_hist *h, const u32 last_x_recv) +int tfrc_rx_hist_alloc(struct tfrc_rx_hist *h) { - u64 bytes = h->bytes_recvd, last_rtt = h->rtt_estimate; - s64 delta = ktime_to_us(net_timedelta(h->bytes_start)); - - WARN_ON(delta <= 0); - /* - * Ensure that the sampling interval for X_recv is at least one RTT, - * by extending the sampling interval backwards in time, over the last - * R_(m-1) seconds, as per rfc3448bis-06, 6.2. - * To reduce noise (e.g. when the RTT changes often), this is only - * done when delta is smaller than RTT/2. - */ - if (last_x_recv > 0 && delta < last_rtt/2) { - tfrc_pr_debug("delta < RTT ==> %ld us < %u us\n", - (long)delta, (unsigned)last_rtt); + int i; - delta = (bytes ? delta : 0) + last_rtt; - bytes += div_u64((u64)last_x_recv * last_rtt, USEC_PER_SEC); + for (i = 0; i <= TFRC_NDUPACK; i++) { + h->ring[i] = kmem_cache_alloc(tfrc_rx_hist_slab, GFP_ATOMIC); + if (h->ring[i] == NULL) + goto out_free; } - if (unlikely(bytes == 0)) { - DCCP_WARN("X_recv == 0, using old value of %u\n", last_x_recv); - return last_x_recv; + h->loss_count = h->loss_start = 0; + return 0; + +out_free: + while (i-- != 0) { + kmem_cache_free(tfrc_rx_hist_slab, h->ring[i]); + h->ring[i] = NULL; } - return scaled_div32(bytes, delta); + return -ENOBUFS; } -EXPORT_SYMBOL_GPL(tfrc_rx_hist_x_recv); +EXPORT_SYMBOL_GPL(tfrc_rx_hist_alloc); void tfrc_rx_hist_purge(struct tfrc_rx_hist *h) { @@ -426,81 +426,73 @@ void tfrc_rx_hist_purge(struct tfrc_rx_hist *h) } EXPORT_SYMBOL_GPL(tfrc_rx_hist_purge); -static int tfrc_rx_hist_alloc(struct tfrc_rx_hist *h) +/** + * tfrc_rx_hist_rtt_last_s - reference entry to compute RTT samples against + */ +static inline struct tfrc_rx_hist_entry * + tfrc_rx_hist_rtt_last_s(const struct tfrc_rx_hist *h) { - int i; - - memset(h, 0, sizeof(*h)); - - for (i = 0; i <= TFRC_NDUPACK; i++) { - h->ring[i] = kmem_cache_alloc(tfrc_rx_hist_slab, GFP_ATOMIC); - if (h->ring[i] == NULL) { - tfrc_rx_hist_purge(h); - return -ENOBUFS; - } - } - return 0; + return h->ring[0]; } -int tfrc_rx_hist_init(struct tfrc_rx_hist *h, struct sock *sk) +/** + * tfrc_rx_hist_rtt_prev_s: previously suitable (wrt rtt_last_s) RTT-sampling entry + */ +static inline struct tfrc_rx_hist_entry * + tfrc_rx_hist_rtt_prev_s(const struct tfrc_rx_hist *h) { - if (tfrc_rx_hist_alloc(h)) - return -ENOBUFS; - /* - * Initialise first entry with GSR to start loss detection as early as - * possible. Code using this must not use any other fields. The entry - * will be overwritten once the CCID updates its received packets. - */ - tfrc_rx_hist_loss_prev(h)->tfrchrx_seqno = dccp_sk(sk)->dccps_gsr; - return 0; + return h->ring[h->rtt_sample_prev]; } -EXPORT_SYMBOL_GPL(tfrc_rx_hist_init); /** * tfrc_rx_hist_sample_rtt - Sample RTT from timestamp / CCVal - * Based on ideas presented in RFC 4342, 8.1. This function expects that no loss - * is pending and uses the following history entries (via rtt_sample_prev): - * - h->ring[0] contains the most recent history entry prior to @skb; - * - h->ring[1] is an unused `dummy' entry when the current difference is 0; + * Based on ideas presented in RFC 4342, 8.1. Returns 0 if it was not able + * to compute a sample with given data - calling function should check this. */ -void tfrc_rx_hist_sample_rtt(struct tfrc_rx_hist *h, const struct sk_buff *skb) +u32 tfrc_rx_hist_sample_rtt(struct tfrc_rx_hist *h, const struct sk_buff *skb) { - struct tfrc_rx_hist_entry *last = h->ring[0]; - u32 sample, delta_v; - - /* - * When not to sample: - * - on non-data packets - * (RFC 4342, 8.1: CCVal only fully defined for data packets); - * - when no data packets have been received yet - * (FIXME: using sampled packet size as indicator here); - * - as long as there are gaps in the sequence space (pending loss). - */ - if (!dccp_data_packet(skb) || h->packet_size == 0 || - tfrc_rx_hist_loss_pending(h)) - return; + u32 sample = 0, + delta_v = SUB16(dccp_hdr(skb)->dccph_ccval, + tfrc_rx_hist_rtt_last_s(h)->tfrchrx_ccval); + + if (delta_v < 1 || delta_v > 4) { /* unsuitable CCVal delta */ + if (h->rtt_sample_prev == 2) { /* previous candidate stored */ + sample = SUB16(tfrc_rx_hist_rtt_prev_s(h)->tfrchrx_ccval, + tfrc_rx_hist_rtt_last_s(h)->tfrchrx_ccval); + if (sample) + sample = 4 / sample * + ktime_us_delta(tfrc_rx_hist_rtt_prev_s(h)->tfrchrx_tstamp, + tfrc_rx_hist_rtt_last_s(h)->tfrchrx_tstamp); + else /* + * FIXME: This condition is in principle not + * possible but occurs when CCID is used for + * two-way data traffic. I have tried to trace + * it, but the cause does not seem to be here. + */ + DCCP_BUG("please report to dccp@vger.kernel.org" + " => prev = %u, last = %u", + tfrc_rx_hist_rtt_prev_s(h)->tfrchrx_ccval, + tfrc_rx_hist_rtt_last_s(h)->tfrchrx_ccval); + } else if (delta_v < 1) { + h->rtt_sample_prev = 1; + goto keep_ref_for_next_time; + } - h->rtt_sample_prev = 0; /* reset previous candidate */ + } else if (delta_v == 4) /* optimal match */ + sample = ktime_to_us(net_timedelta(tfrc_rx_hist_rtt_last_s(h)->tfrchrx_tstamp)); + else { /* suboptimal match */ + h->rtt_sample_prev = 2; + goto keep_ref_for_next_time; + } - delta_v = SUB16(dccp_hdr(skb)->dccph_ccval, last->tfrchrx_ccval); - if (delta_v == 0) { /* less than RTT/4 difference */ - h->rtt_sample_prev = 1; - return; + if (unlikely(sample > DCCP_SANE_RTT_MAX)) { + DCCP_WARN("RTT sample %u too large, using max\n", sample); + sample = DCCP_SANE_RTT_MAX; } - sample = dccp_sane_rtt(ktime_to_us(net_timedelta(last->tfrchrx_tstamp))); - if (delta_v <= 4) /* between RTT/4 and RTT */ - sample *= 4 / delta_v; - else if (!(sample < h->rtt_estimate && sample > h->rtt_estimate/2)) - /* - * Optimisation: CCVal difference is greater than 1 RTT, yet the - * sample is less than the local RTT estimate; which means that - * the RTT estimate is too high. - * To avoid noise, it is not done if the sample is below RTT/2. - */ - return; + h->rtt_sample_prev = 0; /* use current entry as next reference */ +keep_ref_for_next_time: - /* Use a lower weight than usual to increase responsiveness */ - h->rtt_estimate = tfrc_ewma(h->rtt_estimate, sample, 5); + return sample; } EXPORT_SYMBOL_GPL(tfrc_rx_hist_sample_rtt); diff --git a/net/dccp/ccids/lib/packet_history.h b/net/dccp/ccids/lib/packet_history.h index 555e65cd73a..461cc91cce8 100644 --- a/net/dccp/ccids/lib/packet_history.h +++ b/net/dccp/ccids/lib/packet_history.h @@ -40,28 +40,12 @@ #include #include "tfrc.h" -/** - * tfrc_tx_hist_entry - Simple singly-linked TX history list - * @next: next oldest entry (LIFO order) - * @seqno: sequence number of this entry - * @stamp: send time of packet with sequence number @seqno - */ -struct tfrc_tx_hist_entry { - struct tfrc_tx_hist_entry *next; - u64 seqno; - ktime_t stamp; -}; - -static inline struct tfrc_tx_hist_entry * - tfrc_tx_hist_find_entry(struct tfrc_tx_hist_entry *head, u64 seqno) -{ - while (head != NULL && head->seqno != seqno) - head = head->next; - return head; -} +struct tfrc_tx_hist_entry; extern int tfrc_tx_hist_add(struct tfrc_tx_hist_entry **headp, u64 seqno); extern void tfrc_tx_hist_purge(struct tfrc_tx_hist_entry **headp); +extern u32 tfrc_tx_hist_rtt(struct tfrc_tx_hist_entry *head, + const u64 seqno, const ktime_t now); /* Subtraction a-b modulo-16, respects circular wrap-around */ #define SUB16(a, b) (((a) + 16 - (b)) & 0xF) @@ -91,22 +75,12 @@ struct tfrc_rx_hist_entry { * @loss_count: Number of entries in circular history * @loss_start: Movable index (for loss detection) * @rtt_sample_prev: Used during RTT sampling, points to candidate entry - * @rtt_estimate: Receiver RTT estimate - * @packet_size: Packet size in bytes (as per RFC 3448, 3.1) - * @bytes_recvd: Number of bytes received since @bytes_start - * @bytes_start: Start time for counting @bytes_recvd */ struct tfrc_rx_hist { struct tfrc_rx_hist_entry *ring[TFRC_NDUPACK + 1]; u8 loss_count:2, loss_start:2; - /* Receiver RTT sampling */ #define rtt_sample_prev loss_start - u32 rtt_estimate; - /* Receiver sampling of application payload lengths */ - u32 packet_size, - bytes_recvd; - ktime_t bytes_start; }; /** @@ -150,50 +124,20 @@ static inline bool tfrc_rx_hist_loss_pending(const struct tfrc_rx_hist *h) return h->loss_count > 0; } -/* - * Accessor functions to retrieve parameters sampled by the RX history - */ -static inline u32 tfrc_rx_hist_packet_size(const struct tfrc_rx_hist *h) -{ - if (h->packet_size == 0) { - DCCP_WARN("No sample for s, using fallback\n"); - return TCP_MIN_RCVMSS; - } - return h->packet_size; - -} -static inline u32 tfrc_rx_hist_rtt(const struct tfrc_rx_hist *h) -{ - if (h->rtt_estimate == 0) { - DCCP_WARN("No RTT estimate available, using fallback RTT\n"); - return DCCP_FALLBACK_RTT; - } - return h->rtt_estimate; -} - -static inline void tfrc_rx_hist_restart_byte_counter(struct tfrc_rx_hist *h) -{ - h->bytes_recvd = 0; - h->bytes_start = ktime_get_real(); -} - -extern u32 tfrc_rx_hist_x_recv(struct tfrc_rx_hist *h, const u32 last_x_recv); - - extern void tfrc_rx_hist_add_packet(struct tfrc_rx_hist *h, const struct sk_buff *skb, const u64 ndp); extern int tfrc_rx_hist_duplicate(struct tfrc_rx_hist *h, struct sk_buff *skb); struct tfrc_loss_hist; -extern bool tfrc_rx_congestion_event(struct tfrc_rx_hist *h, - struct tfrc_loss_hist *lh, - struct sk_buff *skb, const u64 ndp, - u32 (*first_li)(struct sock *sk), - struct sock *sk); -extern void tfrc_rx_hist_sample_rtt(struct tfrc_rx_hist *h, - const struct sk_buff *skb); -extern int tfrc_rx_hist_init(struct tfrc_rx_hist *h, struct sock *sk); +extern int tfrc_rx_handle_loss(struct tfrc_rx_hist *h, + struct tfrc_loss_hist *lh, + struct sk_buff *skb, const u64 ndp, + u32 (*first_li)(struct sock *sk), + struct sock *sk); +extern u32 tfrc_rx_hist_sample_rtt(struct tfrc_rx_hist *h, + const struct sk_buff *skb); +extern int tfrc_rx_hist_alloc(struct tfrc_rx_hist *h); extern void tfrc_rx_hist_purge(struct tfrc_rx_hist *h); #endif /* _DCCP_PKT_HIST_ */ diff --git a/net/dccp/ccids/lib/tfrc.h b/net/dccp/ccids/lib/tfrc.h index ede12f53de5..ed9857527ac 100644 --- a/net/dccp/ccids/lib/tfrc.h +++ b/net/dccp/ccids/lib/tfrc.h @@ -47,21 +47,6 @@ static inline u32 scaled_div32(u64 a, u64 b) return result; } -/** - * tfrc_scaled_sqrt - Compute scaled integer sqrt(x) for 0 < x < 2^22-1 - * Uses scaling to improve accuracy of the integer approximation of sqrt(). The - * scaling factor of 2^10 limits the maximum @sample to 4e6; this is okay for - * clamped RTT samples (dccp_sample_rtt). - * Should best be used for expressions of type sqrt(x)/sqrt(y), since then the - * scaling factor is neutralised. For this purpose, it avoids returning zero. - */ -static inline u16 tfrc_scaled_sqrt(const u32 sample) -{ - const unsigned long non_zero_sample = sample ? : 1; - - return int_sqrt(non_zero_sample << 10); -} - /** * tfrc_ewma - Exponentially weighted moving average * @weight: Weight to be used as damping factor, in units of 1/10 @@ -73,7 +58,6 @@ static inline u32 tfrc_ewma(const u32 avg, const u32 newval, const u8 weight) extern u32 tfrc_calc_x(u16 s, u32 R, u32 p); extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue); -extern u32 tfrc_invert_loss_event_rate(u32 loss_event_rate); extern int tfrc_tx_packet_history_init(void); extern void tfrc_tx_packet_history_exit(void); diff --git a/net/dccp/ccids/lib/tfrc_equation.c b/net/dccp/ccids/lib/tfrc_equation.c index 38239c4d5e1..2f20a29cffe 100644 --- a/net/dccp/ccids/lib/tfrc_equation.c +++ b/net/dccp/ccids/lib/tfrc_equation.c @@ -632,16 +632,8 @@ u32 tfrc_calc_x(u16 s, u32 R, u32 p) if (p <= TFRC_CALC_X_SPLIT) { /* 0.0000 < p <= 0.05 */ if (p < TFRC_SMALLEST_P) { /* 0.0000 < p < 0.0001 */ - /* - * In the congestion-avoidance phase p decays towards 0 - * when there are no further losses, so this case is - * natural. Truncating to p_min = 0.01% means that the - * maximum achievable throughput is limited to about - * X_calc_max = 122.4 * s/RTT (see RFC 3448, 3.1); e.g. - * with s=1500 bytes, RTT=0.01 s: X_calc_max = 147 Mbps. - */ - tfrc_pr_debug("Value of p (%d) below resolution. " - "Substituting %d\n", p, TFRC_SMALLEST_P); + DCCP_WARN("Value of p (%d) below resolution. " + "Substituting %d\n", p, TFRC_SMALLEST_P); index = 0; } else /* 0.0001 <= p <= 0.05 */ index = p/TFRC_SMALLEST_P - 1; @@ -666,6 +658,7 @@ u32 tfrc_calc_x(u16 s, u32 R, u32 p) result = scaled_div(s, R); return scaled_div32(result, f); } + EXPORT_SYMBOL_GPL(tfrc_calc_x); /** @@ -700,19 +693,5 @@ u32 tfrc_calc_x_reverse_lookup(u32 fvalue) index = tfrc_binsearch(fvalue, 0); return (index + 1) * 1000000 / TFRC_CALC_X_ARRSIZE; } -EXPORT_SYMBOL_GPL(tfrc_calc_x_reverse_lookup); -/** - * tfrc_invert_loss_event_rate - Compute p so that 10^6 corresponds to 100% - * When @loss_event_rate is large, there is a chance that p is truncated to 0. - * To avoid re-entering slow-start in that case, we set p = TFRC_SMALLEST_P > 0. - */ -u32 tfrc_invert_loss_event_rate(u32 loss_event_rate) -{ - if (loss_event_rate == UINT_MAX) /* see RFC 4342, 8.5 */ - return 0; - if (unlikely(loss_event_rate == 0)) /* map 1/0 into 100% */ - return 1000000; - return max_t(u32, scaled_div(1, loss_event_rate), TFRC_SMALLEST_P); -} -EXPORT_SYMBOL_GPL(tfrc_invert_loss_event_rate); +EXPORT_SYMBOL_GPL(tfrc_calc_x_reverse_lookup); diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 5281190aa19..b4bc6e095a0 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -42,11 +42,9 @@ extern int dccp_debug; #define dccp_pr_debug(format, a...) DCCP_PR_DEBUG(dccp_debug, format, ##a) #define dccp_pr_debug_cat(format, a...) DCCP_PRINTK(dccp_debug, format, ##a) -#define dccp_debug(fmt, a...) dccp_pr_debug_cat(KERN_DEBUG fmt, ##a) #else #define dccp_pr_debug(format, a...) #define dccp_pr_debug_cat(format, a...) -#define dccp_debug(format, a...) #endif extern struct inet_hashinfo dccp_hashinfo; @@ -63,14 +61,11 @@ extern void dccp_time_wait(struct sock *sk, int state, int timeo); * - DCCP-Reset with ACK Subheader and 4 bytes of Reset Code fields * Hence a safe upper bound for the maximum option length is 1020-28 = 992 */ -#define MAX_DCCP_SPECIFIC_HEADER (255 * sizeof(uint32_t)) +#define MAX_DCCP_SPECIFIC_HEADER (255 * sizeof(int)) #define DCCP_MAX_PACKET_HDR 28 #define DCCP_MAX_OPT_LEN (MAX_DCCP_SPECIFIC_HEADER - DCCP_MAX_PACKET_HDR) #define MAX_DCCP_HEADER (MAX_DCCP_SPECIFIC_HEADER + MAX_HEADER) -/* Upper bound for initial feature-negotiation overhead (padded to 32 bits) */ -#define DCCP_FEATNEG_OVERHEAD (32 * sizeof(uint32_t)) - #define DCCP_TIMEWAIT_LEN (60 * HZ) /* how long to wait to destroy TIME-WAIT * state, about 60 seconds */ @@ -86,13 +81,10 @@ extern void dccp_time_wait(struct sock *sk, int state, int timeo); */ #define DCCP_RTO_MAX ((unsigned)(64 * HZ)) -/* DCCP base time resolution - 10 microseconds (RFC 4340, 13.1 ... 13.3) */ -#define DCCP_TIME_RESOLUTION 10 - /* * RTT sampling: sanity bounds and fallback RTT value from RFC 4340, section 3.4 */ -#define DCCP_SANE_RTT_MIN (10 * DCCP_TIME_RESOLUTION) +#define DCCP_SANE_RTT_MIN 100 #define DCCP_FALLBACK_RTT (USEC_PER_SEC / 5) #define DCCP_SANE_RTT_MAX (3 * USEC_PER_SEC) @@ -103,6 +95,12 @@ extern void dccp_time_wait(struct sock *sk, int state, int timeo); extern int sysctl_dccp_request_retries; extern int sysctl_dccp_retries1; extern int sysctl_dccp_retries2; +extern int sysctl_dccp_feat_sequence_window; +extern int sysctl_dccp_feat_rx_ccid; +extern int sysctl_dccp_feat_tx_ccid; +extern int sysctl_dccp_feat_ack_ratio; +extern int sysctl_dccp_feat_send_ack_vector; +extern int sysctl_dccp_feat_send_ndp_count; extern int sysctl_dccp_tx_qlen; extern int sysctl_dccp_sync_ratelimit; @@ -237,22 +235,8 @@ extern void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, extern void dccp_send_sync(struct sock *sk, const u64 seq, const enum dccp_pkt_type pkt_type); -/* - * TX Packet Dequeueing Interface - */ -extern void dccp_qpolicy_push(struct sock *sk, struct sk_buff *skb); -extern bool dccp_qpolicy_full(struct sock *sk); -extern void dccp_qpolicy_drop(struct sock *sk, struct sk_buff *skb); -extern struct sk_buff *dccp_qpolicy_top(struct sock *sk); -extern struct sk_buff *dccp_qpolicy_pop(struct sock *sk); -extern bool dccp_qpolicy_param_ok(struct sock *sk, __be32 param); - -/* - * TX Packet Output and TX Timers - */ -extern void dccp_write_xmit(struct sock *sk); +extern void dccp_write_xmit(struct sock *sk, int block); extern void dccp_write_space(struct sock *sk); -extern void dccp_flush_write_queue(struct sock *sk, long *time_budget); extern void dccp_init_xmit_timers(struct sock *sk); static inline void dccp_clear_xmit_timers(struct sock *sk) @@ -268,8 +252,7 @@ extern const char *dccp_state_name(const int state); extern void dccp_set_state(struct sock *sk, const int state); extern void dccp_done(struct sock *sk); -extern int dccp_reqsk_init(struct request_sock *rq, struct dccp_sock const *dp, - struct sk_buff const *skb); +extern void dccp_reqsk_init(struct request_sock *req, struct sk_buff *skb); extern int dccp_v4_conn_request(struct sock *sk, struct sk_buff *skb); @@ -334,14 +317,7 @@ extern struct sk_buff *dccp_ctl_make_reset(struct sock *sk, extern int dccp_send_reset(struct sock *sk, enum dccp_reset_codes code); extern void dccp_send_close(struct sock *sk, const int active); extern int dccp_invalid_packet(struct sk_buff *skb); - -static inline u32 dccp_sane_rtt(long usec_sample) -{ - if (unlikely(usec_sample <= 0 || usec_sample > DCCP_SANE_RTT_MAX)) - DCCP_WARN("RTT sample %ld out of bounds!\n", usec_sample); - return clamp_val(usec_sample, DCCP_SANE_RTT_MIN, DCCP_SANE_RTT_MAX); -} -extern u32 dccp_sample_rtt(struct sock *sk, long delta); +extern u32 dccp_sample_rtt(struct sock *sk, long delta); static inline int dccp_bad_service_code(const struct sock *sk, const __be32 service) @@ -435,62 +411,36 @@ static inline void dccp_hdr_set_ack(struct dccp_hdr_ack_bits *dhack, static inline void dccp_update_gsr(struct sock *sk, u64 seq) { struct dccp_sock *dp = dccp_sk(sk); + const struct dccp_minisock *dmsk = dccp_msk(sk); dp->dccps_gsr = seq; - /* Sequence validity window depends on remote Sequence Window (7.5.1) */ - dp->dccps_swl = SUB48(ADD48(dp->dccps_gsr, 1), dp->dccps_r_seq_win / 4); - /* - * Adjust SWL so that it is not below ISR. In contrast to RFC 4340, - * 7.5.1 we perform this check beyond the initial handshake: W/W' are - * always > 32, so for the first W/W' packets in the lifetime of a - * connection we always have to adjust SWL. - * A second reason why we are doing this is that the window depends on - * the feature-remote value of Sequence Window: nothing stops the peer - * from updating this value while we are busy adjusting SWL for the - * first W packets (we would have to count from scratch again then). - * Therefore it is safer to always make sure that the Sequence Window - * is not artificially extended by a peer who grows SWL downwards by - * continually updating the feature-remote Sequence-Window. - * If sequence numbers wrap it is bad luck. But that will take a while - * (48 bit), and this measure prevents Sequence-number attacks. - */ - if (before48(dp->dccps_swl, dp->dccps_isr)) - dp->dccps_swl = dp->dccps_isr; - dp->dccps_swh = ADD48(dp->dccps_gsr, (3 * dp->dccps_r_seq_win) / 4); + dccp_set_seqno(&dp->dccps_swl, + dp->dccps_gsr + 1 - (dmsk->dccpms_sequence_window / 4)); + dccp_set_seqno(&dp->dccps_swh, + dp->dccps_gsr + (3 * dmsk->dccpms_sequence_window) / 4); } static inline void dccp_update_gss(struct sock *sk, u64 seq) { struct dccp_sock *dp = dccp_sk(sk); - dp->dccps_gss = seq; - /* Ack validity window depends on local Sequence Window value (7.5.1) */ - dp->dccps_awl = SUB48(ADD48(dp->dccps_gss, 1), dp->dccps_l_seq_win); - /* Adjust AWL so that it is not below ISS - see comment above for SWL */ - if (before48(dp->dccps_awl, dp->dccps_iss)) - dp->dccps_awl = dp->dccps_iss; - dp->dccps_awh = dp->dccps_gss; -} - -static inline int dccp_ackvec_pending(const struct sock *sk) -{ - return dccp_sk(sk)->dccps_hc_rx_ackvec != NULL && - !dccp_ackvec_is_empty(dccp_sk(sk)->dccps_hc_rx_ackvec); + dp->dccps_awh = dp->dccps_gss = seq; + dccp_set_seqno(&dp->dccps_awl, + (dp->dccps_gss - + dccp_msk(sk)->dccpms_sequence_window + 1)); } static inline int dccp_ack_pending(const struct sock *sk) { - return dccp_ackvec_pending(sk) || inet_csk_ack_scheduled(sk); + const struct dccp_sock *dp = dccp_sk(sk); + return dp->dccps_timestamp_echo != 0 || +#ifdef CONFIG_IP_DCCP_ACKVEC + (dccp_msk(sk)->dccpms_send_ack_vector && + dccp_ackvec_pending(dp->dccps_hc_rx_ackvec)) || +#endif + inet_csk_ack_scheduled(sk); } -extern int dccp_feat_signal_nn_change(struct sock *sk, u8 feat, u64 nn_val); -extern int dccp_feat_finalise_settings(struct dccp_sock *dp); -extern int dccp_feat_server_ccid_dependencies(struct dccp_request_sock *dreq); -extern int dccp_feat_insert_opts(struct dccp_sock*, struct dccp_request_sock*, - struct sk_buff *skb); -extern int dccp_feat_activate_values(struct sock *sk, struct list_head *fn); -extern void dccp_feat_list_purge(struct list_head *fn_list); - extern int dccp_insert_options(struct sock *sk, struct sk_buff *skb); extern int dccp_insert_options_rsk(struct dccp_request_sock*, struct sk_buff*); extern int dccp_insert_option_elapsed_time(struct sock *sk, diff --git a/net/dccp/diag.c b/net/dccp/diag.c index 93aae7c9555..d8a3509b26f 100644 --- a/net/dccp/diag.c +++ b/net/dccp/diag.c @@ -29,7 +29,7 @@ static void dccp_get_info(struct sock *sk, struct tcp_info *info) info->tcpi_backoff = icsk->icsk_backoff; info->tcpi_pmtu = icsk->icsk_pmtu_cookie; - if (dp->dccps_hc_rx_ackvec != NULL) + if (dccp_msk(sk)->dccpms_send_ack_vector) info->tcpi_options |= TCPI_OPT_SACK; ccid_hc_rx_get_info(dp->dccps_hc_rx_ccid, sk, info); diff --git a/net/dccp/feat.c b/net/dccp/feat.c index f94c7c9d1a7..933a0ecf8d4 100644 --- a/net/dccp/feat.c +++ b/net/dccp/feat.c @@ -1,19 +1,11 @@ /* * net/dccp/feat.c * - * Feature negotiation for the DCCP protocol (RFC 4340, section 6) - * - * Copyright (c) 2008 The University of Aberdeen, Scotland, UK - * Copyright (c) 2008 Gerrit Renker - * Rewrote from scratch, some bits from earlier code by - * Copyright (c) 2005 Andrea Bittau - * + * An implementation of the DCCP protocol + * Andrea Bittau * * ASSUMPTIONS * ----------- - * o Feature negotiation is coordinated with connection setup (as in TCP), wild - * changes of parameters of an established connection are not supported. - * o Changing NN values (Ack Ratio only) is supported in state OPEN/PARTOPEN. * o All currently known SP features have 1-byte quantities. If in the future * extensions of RFCs 4340..42 define features with item lengths larger than * one byte, a feature-specific extension of the code will be required. @@ -23,1510 +15,635 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ + #include + #include "ccid.h" #include "feat.h" -/* feature-specific sysctls - initialised to the defaults from RFC 4340, 6.4 */ -unsigned long sysctl_dccp_sequence_window __read_mostly = 100; -int sysctl_dccp_rx_ccid __read_mostly = 2, - sysctl_dccp_tx_ccid __read_mostly = 2; +#define DCCP_FEAT_SP_NOAGREE (-123) -/* - * Feature activation handlers. - * - * These all use an u64 argument, to provide enough room for NN/SP features. At - * this stage the negotiated values have been checked to be within their range. - */ -static int dccp_hdlr_ccid(struct sock *sk, u64 ccid, bool rx) +int dccp_feat_change(struct dccp_minisock *dmsk, u8 type, u8 feature, + u8 *val, u8 len, gfp_t gfp) { - struct dccp_sock *dp = dccp_sk(sk); - struct ccid *new_ccid = ccid_new(ccid, sk, rx, gfp_any()); + struct dccp_opt_pend *opt; - if (new_ccid == NULL) - return -ENOMEM; + dccp_feat_debug(type, feature, *val); - if (rx) { - ccid_hc_rx_delete(dp->dccps_hc_rx_ccid, sk); - dp->dccps_hc_rx_ccid = new_ccid; - } else { - ccid_hc_tx_delete(dp->dccps_hc_tx_ccid, sk); - dp->dccps_hc_tx_ccid = new_ccid; + if (len > 3) { + DCCP_WARN("invalid length %d\n", len); + return -EINVAL; + } + /* XXX add further sanity checks */ + + /* check if that feature is already being negotiated */ + list_for_each_entry(opt, &dmsk->dccpms_pending, dccpop_node) { + /* ok we found a negotiation for this option already */ + if (opt->dccpop_feat == feature && opt->dccpop_type == type) { + dccp_pr_debug("Replacing old\n"); + /* replace */ + BUG_ON(opt->dccpop_val == NULL); + kfree(opt->dccpop_val); + opt->dccpop_val = val; + opt->dccpop_len = len; + opt->dccpop_conf = 0; + return 0; + } } - return 0; -} -static int dccp_hdlr_seq_win(struct sock *sk, u64 seq_win, bool rx) -{ - struct dccp_sock *dp = dccp_sk(sk); + /* negotiation for a new feature */ + opt = kmalloc(sizeof(*opt), gfp); + if (opt == NULL) + return -ENOMEM; - if (rx) { - dp->dccps_r_seq_win = seq_win; - /* propagate changes to update SWL/SWH */ - dccp_update_gsr(sk, dp->dccps_gsr); - } else { - dp->dccps_l_seq_win = seq_win; - /* propagate changes to update AWL */ - dccp_update_gss(sk, dp->dccps_gss); - } - return 0; -} + opt->dccpop_type = type; + opt->dccpop_feat = feature; + opt->dccpop_len = len; + opt->dccpop_val = val; + opt->dccpop_conf = 0; + opt->dccpop_sc = NULL; -static int dccp_hdlr_ack_ratio(struct sock *sk, u64 ratio, bool rx) -{ -#ifndef __CCID2_COPES_GRACEFULLY_WITH_DYNAMIC_ACK_RATIO_UPDATES__ - /* - * FIXME: This is required until several problems in the CCID-2 code are - * resolved. The CCID-2 code currently does not cope well; using dynamic - * Ack Ratios greater than 1 caused instabilities. These were manifest - * in hangups and long RTO timeouts (1...3 seconds). Until this has been - * stabilised, it is safer not to activate dynamic Ack Ratio changes. - */ - dccp_pr_debug("Not changing %s Ack Ratio from 1 to %u\n", - rx ? "RX" : "TX", (u16)ratio); - ratio = 1; -#endif - if (rx) - dccp_sk(sk)->dccps_r_ack_ratio = ratio; - else - dccp_sk(sk)->dccps_l_ack_ratio = ratio; + BUG_ON(opt->dccpop_val == NULL); + + list_add_tail(&opt->dccpop_node, &dmsk->dccpms_pending); return 0; } -static int dccp_hdlr_ackvec(struct sock *sk, u64 enable, bool rx) +EXPORT_SYMBOL_GPL(dccp_feat_change); + +static int dccp_feat_update_ccid(struct sock *sk, u8 type, u8 new_ccid_nr) { struct dccp_sock *dp = dccp_sk(sk); + struct dccp_minisock *dmsk = dccp_msk(sk); + /* figure out if we are changing our CCID or the peer's */ + const int rx = type == DCCPO_CHANGE_R; + const u8 ccid_nr = rx ? dmsk->dccpms_rx_ccid : dmsk->dccpms_tx_ccid; + struct ccid *new_ccid; + + /* Check if nothing is being changed. */ + if (ccid_nr == new_ccid_nr) + return 0; + + new_ccid = ccid_new(new_ccid_nr, sk, rx, GFP_ATOMIC); + if (new_ccid == NULL) + return -ENOMEM; if (rx) { - if (enable && dp->dccps_hc_rx_ackvec == NULL) { - dp->dccps_hc_rx_ackvec = dccp_ackvec_alloc(gfp_any()); - if (dp->dccps_hc_rx_ackvec == NULL) - return -ENOMEM; - } else if (!enable) { - dccp_ackvec_free(dp->dccps_hc_rx_ackvec); - dp->dccps_hc_rx_ackvec = NULL; - } + ccid_hc_rx_delete(dp->dccps_hc_rx_ccid, sk); + dp->dccps_hc_rx_ccid = new_ccid; + dmsk->dccpms_rx_ccid = new_ccid_nr; + } else { + ccid_hc_tx_delete(dp->dccps_hc_tx_ccid, sk); + dp->dccps_hc_tx_ccid = new_ccid; + dmsk->dccpms_tx_ccid = new_ccid_nr; } - return 0; -} -static int dccp_hdlr_ndp(struct sock *sk, u64 enable, bool rx) -{ - if (!rx) - dccp_sk(sk)->dccps_send_ndp_count = (enable > 0); return 0; } -/* - * Minimum Checksum Coverage is located at the RX side (9.2.1). This means that - * `rx' holds when the sending peer informs about his partial coverage via a - * ChangeR() option. In the other case, we are the sender and the receiver - * announces its coverage via ChangeL() options. The policy here is to honour - * such communication by enabling the corresponding partial coverage - but only - * if it has not been set manually before; the warning here means that all - * packets will be dropped. - */ -static int dccp_hdlr_min_cscov(struct sock *sk, u64 cscov, bool rx) +static int dccp_feat_update(struct sock *sk, u8 type, u8 feat, u8 val) { - struct dccp_sock *dp = dccp_sk(sk); + dccp_feat_debug(type, feat, val); - if (rx) - dp->dccps_pcrlen = cscov; - else { - if (dp->dccps_pcslen == 0) - dp->dccps_pcslen = cscov; - else if (cscov > dp->dccps_pcslen) - DCCP_WARN("CsCov %u too small, peer requires >= %u\n", - dp->dccps_pcslen, (u8)cscov); + switch (feat) { + case DCCPF_CCID: + return dccp_feat_update_ccid(sk, type, val); + default: + dccp_pr_debug("UNIMPLEMENTED: %s(%d, ...)\n", + dccp_feat_typename(type), feat); + break; } return 0; } -static const struct { - u8 feat_num; /* DCCPF_xxx */ - enum dccp_feat_type rxtx; /* RX or TX */ - enum dccp_feat_type reconciliation; /* SP or NN */ - u8 default_value; /* as in 6.4 */ - int (*activation_hdlr)(struct sock *sk, u64 val, bool rx); -/* - * Lookup table for location and type of features (from RFC 4340/4342) - * +--------------------------+----+-----+----+----+---------+-----------+ - * | Feature | Location | Reconc. | Initial | Section | - * | | RX | TX | SP | NN | Value | Reference | - * +--------------------------+----+-----+----+----+---------+-----------+ - * | DCCPF_CCID | | X | X | | 2 | 10 | - * | DCCPF_SHORT_SEQNOS | | X | X | | 0 | 7.6.1 | - * | DCCPF_SEQUENCE_WINDOW | | X | | X | 100 | 7.5.2 | - * | DCCPF_ECN_INCAPABLE | X | | X | | 0 | 12.1 | - * | DCCPF_ACK_RATIO | | X | | X | 2 | 11.3 | - * | DCCPF_SEND_ACK_VECTOR | X | | X | | 0 | 11.5 | - * | DCCPF_SEND_NDP_COUNT | | X | X | | 0 | 7.7.2 | - * | DCCPF_MIN_CSUM_COVER | X | | X | | 0 | 9.2.1 | - * | DCCPF_DATA_CHECKSUM | X | | X | | 0 | 9.3.1 | - * | DCCPF_SEND_LEV_RATE | X | | X | | 0 | 4342/8.4 | - * +--------------------------+----+-----+----+----+---------+-----------+ - */ -} dccp_feat_table[] = { - { DCCPF_CCID, FEAT_AT_TX, FEAT_SP, 2, dccp_hdlr_ccid }, - { DCCPF_SHORT_SEQNOS, FEAT_AT_TX, FEAT_SP, 0, NULL }, - { DCCPF_SEQUENCE_WINDOW, FEAT_AT_TX, FEAT_NN, 100, dccp_hdlr_seq_win }, - { DCCPF_ECN_INCAPABLE, FEAT_AT_RX, FEAT_SP, 0, NULL }, - { DCCPF_ACK_RATIO, FEAT_AT_TX, FEAT_NN, 2, dccp_hdlr_ack_ratio}, - { DCCPF_SEND_ACK_VECTOR, FEAT_AT_RX, FEAT_SP, 0, dccp_hdlr_ackvec }, - { DCCPF_SEND_NDP_COUNT, FEAT_AT_TX, FEAT_SP, 0, dccp_hdlr_ndp }, - { DCCPF_MIN_CSUM_COVER, FEAT_AT_RX, FEAT_SP, 0, dccp_hdlr_min_cscov}, - { DCCPF_DATA_CHECKSUM, FEAT_AT_RX, FEAT_SP, 0, NULL }, - { DCCPF_SEND_LEV_RATE, FEAT_AT_RX, FEAT_SP, 0, NULL }, -}; -#define DCCP_FEAT_SUPPORTED_MAX ARRAY_SIZE(dccp_feat_table) - -/** - * dccp_feat_index - Hash function to map feature number into array position - * Returns consecutive array index or -1 if the feature is not understood. - */ -static int dccp_feat_index(u8 feat_num) +static int dccp_feat_reconcile(struct sock *sk, struct dccp_opt_pend *opt, + u8 *rpref, u8 rlen) { - /* The first 9 entries are occupied by the types from RFC 4340, 6.4 */ - if (feat_num > DCCPF_RESERVED && feat_num <= DCCPF_DATA_CHECKSUM) - return feat_num - 1; + struct dccp_sock *dp = dccp_sk(sk); + u8 *spref, slen, *res = NULL; + int i, j, rc, agree = 1; + BUG_ON(rpref == NULL); + + /* check if we are the black sheep */ + if (dp->dccps_role == DCCP_ROLE_CLIENT) { + spref = rpref; + slen = rlen; + rpref = opt->dccpop_val; + rlen = opt->dccpop_len; + } else { + spref = opt->dccpop_val; + slen = opt->dccpop_len; + } /* - * Other features: add cases for new feature types here after adding - * them to the above table. + * Now we have server preference list in spref and client preference in + * rpref */ - switch (feat_num) { - case DCCPF_SEND_LEV_RATE: - return DCCP_FEAT_SUPPORTED_MAX - 1; - } - return -1; -} - -static u8 dccp_feat_type(u8 feat_num) -{ - int idx = dccp_feat_index(feat_num); - - if (idx < 0) - return FEAT_UNKNOWN; - return dccp_feat_table[idx].reconciliation; -} + BUG_ON(spref == NULL); + BUG_ON(rpref == NULL); -static int dccp_feat_default_value(u8 feat_num) -{ - int idx = dccp_feat_index(feat_num); + /* FIXME sanity check vals */ - return idx < 0 ? : dccp_feat_table[idx].default_value; -} - -/* - * Debugging and verbose-printing section - */ -static const char *dccp_feat_fname(const u8 feat) -{ - static const char *feature_names[] = { - [DCCPF_RESERVED] = "Reserved", - [DCCPF_CCID] = "CCID", - [DCCPF_SHORT_SEQNOS] = "Allow Short Seqnos", - [DCCPF_SEQUENCE_WINDOW] = "Sequence Window", - [DCCPF_ECN_INCAPABLE] = "ECN Incapable", - [DCCPF_ACK_RATIO] = "Ack Ratio", - [DCCPF_SEND_ACK_VECTOR] = "Send ACK Vector", - [DCCPF_SEND_NDP_COUNT] = "Send NDP Count", - [DCCPF_MIN_CSUM_COVER] = "Min. Csum Coverage", - [DCCPF_DATA_CHECKSUM] = "Send Data Checksum", - }; - if (feat > DCCPF_DATA_CHECKSUM && feat < DCCPF_MIN_CCID_SPECIFIC) - return feature_names[DCCPF_RESERVED]; - - if (feat == DCCPF_SEND_LEV_RATE) - return "Send Loss Event Rate"; - if (feat >= DCCPF_MIN_CCID_SPECIFIC) - return "CCID-specific"; - - return feature_names[feat]; -} - -static const char *dccp_feat_sname[] = { "DEFAULT", "INITIALISING", "CHANGING", - "UNSTABLE", "STABLE" }; - -#ifdef CONFIG_IP_DCCP_DEBUG -static const char *dccp_feat_oname(const u8 opt) -{ - switch (opt) { - case DCCPO_CHANGE_L: return "Change_L"; - case DCCPO_CONFIRM_L: return "Confirm_L"; - case DCCPO_CHANGE_R: return "Change_R"; - case DCCPO_CONFIRM_R: return "Confirm_R"; + /* Are values in any order? XXX Lame "algorithm" here */ + for (i = 0; i < slen; i++) { + for (j = 0; j < rlen; j++) { + if (spref[i] == rpref[j]) { + res = &spref[i]; + break; + } + } + if (res) + break; } - return NULL; -} -static void dccp_feat_printval(u8 feat_num, dccp_feat_val const *val) -{ - u8 i, type = dccp_feat_type(feat_num); - - if (val == NULL || (type == FEAT_SP && val->sp.vec == NULL)) - dccp_pr_debug_cat("(NULL)"); - else if (type == FEAT_SP) - for (i = 0; i < val->sp.len; i++) - dccp_pr_debug_cat("%s%u", i ? " " : "", val->sp.vec[i]); - else if (type == FEAT_NN) - dccp_pr_debug_cat("%llu", (unsigned long long)val->nn); - else - dccp_pr_debug_cat("unknown type %u", type); -} - -static void dccp_feat_printvals(u8 feat_num, u8 *list, u8 len) -{ - u8 type = dccp_feat_type(feat_num); - dccp_feat_val fval = { .sp.vec = list, .sp.len = len }; - - if (type == FEAT_NN) - fval.nn = dccp_decode_value_var(list, len); - dccp_feat_printval(feat_num, &fval); -} + /* we didn't agree on anything */ + if (res == NULL) { + /* confirm previous value */ + switch (opt->dccpop_feat) { + case DCCPF_CCID: + /* XXX did i get this right? =P */ + if (opt->dccpop_type == DCCPO_CHANGE_L) + res = &dccp_msk(sk)->dccpms_tx_ccid; + else + res = &dccp_msk(sk)->dccpms_rx_ccid; + break; -static void dccp_feat_print_entry(struct dccp_feat_entry const *entry) -{ - dccp_debug(" * %s %s = ", entry->is_local ? "local" : "remote", - dccp_feat_fname(entry->feat_num)); - dccp_feat_printval(entry->feat_num, &entry->val); - dccp_pr_debug_cat(", state=%s %s\n", dccp_feat_sname[entry->state], - entry->needs_confirm ? "(Confirm pending)" : ""); -} + default: + DCCP_BUG("Fell through, feat=%d", opt->dccpop_feat); + /* XXX implement res */ + return -EFAULT; + } -#define dccp_feat_print_opt(opt, feat, val, len, mandatory) do { \ - dccp_pr_debug("%s(%s, ", dccp_feat_oname(opt), dccp_feat_fname(feat));\ - dccp_feat_printvals(feat, val, len); \ - dccp_pr_debug_cat(") %s\n", mandatory ? "!" : ""); } while (0) - -#define dccp_feat_print_fnlist(fn_list) { \ - const struct dccp_feat_entry *___entry; \ - \ - dccp_pr_debug("List Dump:\n"); \ - list_for_each_entry(___entry, fn_list, node) \ - dccp_feat_print_entry(___entry); \ -} -#else /* ! CONFIG_IP_DCCP_DEBUG */ -#define dccp_feat_print_opt(opt, feat, val, len, mandatory) -#define dccp_feat_print_fnlist(fn_list) -#endif + dccp_pr_debug("Don't agree... reconfirming %d\n", *res); + agree = 0; /* this is used for mandatory options... */ + } -static int __dccp_feat_activate(struct sock *sk, const int idx, - const bool is_local, dccp_feat_val const *fval) -{ - bool rx; - u64 val; + /* need to put result and our preference list */ + rlen = 1 + opt->dccpop_len; + rpref = kmalloc(rlen, GFP_ATOMIC); + if (rpref == NULL) + return -ENOMEM; - if (idx < 0 || idx >= DCCP_FEAT_SUPPORTED_MAX) - return -1; - if (dccp_feat_table[idx].activation_hdlr == NULL) - return 0; + *rpref = *res; + memcpy(&rpref[1], opt->dccpop_val, opt->dccpop_len); - if (fval == NULL) { - val = dccp_feat_table[idx].default_value; - } else if (dccp_feat_table[idx].reconciliation == FEAT_SP) { - if (fval->sp.vec == NULL) { - /* - * This can happen when an empty Confirm is sent - * for an SP (i.e. known) feature. In this case - * we would be using the default anyway. - */ - DCCP_CRIT("Feature #%d undefined: using default", idx); - val = dccp_feat_table[idx].default_value; - } else { - val = fval->sp.vec[0]; + /* put it in the "confirm queue" */ + if (opt->dccpop_sc == NULL) { + opt->dccpop_sc = kmalloc(sizeof(*opt->dccpop_sc), GFP_ATOMIC); + if (opt->dccpop_sc == NULL) { + kfree(rpref); + return -ENOMEM; } } else { - val = fval->nn; + /* recycle the confirm slot */ + BUG_ON(opt->dccpop_sc->dccpoc_val == NULL); + kfree(opt->dccpop_sc->dccpoc_val); + dccp_pr_debug("recycling confirm slot\n"); + } + memset(opt->dccpop_sc, 0, sizeof(*opt->dccpop_sc)); + + opt->dccpop_sc->dccpoc_val = rpref; + opt->dccpop_sc->dccpoc_len = rlen; + + /* update the option on our side [we are about to send the confirm] */ + rc = dccp_feat_update(sk, opt->dccpop_type, opt->dccpop_feat, *res); + if (rc) { + kfree(opt->dccpop_sc->dccpoc_val); + kfree(opt->dccpop_sc); + opt->dccpop_sc = NULL; + return rc; } - /* Location is RX if this is a local-RX or remote-TX feature */ - rx = (is_local == (dccp_feat_table[idx].rxtx == FEAT_AT_RX)); - - dccp_debug(" -> activating %s %s, %sval=%llu\n", rx ? "RX" : "TX", - dccp_feat_fname(dccp_feat_table[idx].feat_num), - fval ? "" : "default ", (unsigned long long)val); - - return dccp_feat_table[idx].activation_hdlr(sk, val, rx); -} - -/** - * dccp_feat_activate - Activate feature value on socket - * @sk: fully connected DCCP socket (after handshake is complete) - * @feat_num: feature to activate, one of %dccp_feature_numbers - * @local: whether local (1) or remote (0) @feat_num is meant - * @fval: the value (SP or NN) to activate, or NULL to use the default value - * For general use this function is preferable over __dccp_feat_activate(). - */ -static int dccp_feat_activate(struct sock *sk, u8 feat_num, bool local, - dccp_feat_val const *fval) -{ - return __dccp_feat_activate(sk, dccp_feat_index(feat_num), local, fval); -} - -/* Test for "Req'd" feature (RFC 4340, 6.4) */ -static inline int dccp_feat_must_be_understood(u8 feat_num) -{ - return feat_num == DCCPF_CCID || feat_num == DCCPF_SHORT_SEQNOS || - feat_num == DCCPF_SEQUENCE_WINDOW; -} + dccp_pr_debug("Will confirm %d\n", *rpref); -/* copy constructor, fval must not already contain allocated memory */ -static int dccp_feat_clone_sp_val(dccp_feat_val *fval, u8 const *val, u8 len) -{ - fval->sp.len = len; - if (fval->sp.len > 0) { - fval->sp.vec = kmemdup(val, len, gfp_any()); - if (fval->sp.vec == NULL) { - fval->sp.len = 0; - return -ENOBUFS; - } + /* say we want to change to X but we just got a confirm X, suppress our + * change + */ + if (!opt->dccpop_conf) { + if (*opt->dccpop_val == *res) + opt->dccpop_conf = 1; + dccp_pr_debug("won't ask for change of same feature\n"); } - return 0; -} -static void dccp_feat_val_destructor(u8 feat_num, dccp_feat_val *val) -{ - if (unlikely(val == NULL)) - return; - if (dccp_feat_type(feat_num) == FEAT_SP) - kfree(val->sp.vec); - memset(val, 0, sizeof(*val)); + return agree ? 0 : DCCP_FEAT_SP_NOAGREE; /* used for mandatory opts */ } -static struct dccp_feat_entry * - dccp_feat_clone_entry(struct dccp_feat_entry const *original) +static int dccp_feat_sp(struct sock *sk, u8 type, u8 feature, u8 *val, u8 len) { - struct dccp_feat_entry *new; - u8 type = dccp_feat_type(original->feat_num); - - if (type == FEAT_UNKNOWN) - return NULL; + struct dccp_minisock *dmsk = dccp_msk(sk); + struct dccp_opt_pend *opt; + int rc = 1; + u8 t; - new = kmemdup(original, sizeof(struct dccp_feat_entry), gfp_any()); - if (new == NULL) - return NULL; + /* + * We received a CHANGE. We gotta match it against our own preference + * list. If we got a CHANGE_R it means it's a change for us, so we need + * to compare our CHANGE_L list. + */ + if (type == DCCPO_CHANGE_L) + t = DCCPO_CHANGE_R; + else + t = DCCPO_CHANGE_L; - if (type == FEAT_SP && dccp_feat_clone_sp_val(&new->val, - original->val.sp.vec, - original->val.sp.len)) { - kfree(new); - return NULL; - } - return new; -} + /* find our preference list for this feature */ + list_for_each_entry(opt, &dmsk->dccpms_pending, dccpop_node) { + if (opt->dccpop_type != t || opt->dccpop_feat != feature) + continue; -static void dccp_feat_entry_destructor(struct dccp_feat_entry *entry) -{ - if (entry != NULL) { - dccp_feat_val_destructor(entry->feat_num, &entry->val); - kfree(entry); + /* find the winner from the two preference lists */ + rc = dccp_feat_reconcile(sk, opt, val, len); + break; } -} -/* - * List management functions - * - * Feature negotiation lists rely on and maintain the following invariants: - * - each feat_num in the list is known, i.e. we know its type and default value - * - each feat_num/is_local combination is unique (old entries are overwritten) - * - SP values are always freshly allocated - * - list is sorted in increasing order of feature number (faster lookup) - */ -static struct dccp_feat_entry *dccp_feat_list_lookup(struct list_head *fn_list, - u8 feat_num, bool is_local) -{ - struct dccp_feat_entry *entry; + /* We didn't deal with the change. This can happen if we have no + * preference list for the feature. In fact, it just shouldn't + * happen---if we understand a feature, we should have a preference list + * with at least the default value. + */ + BUG_ON(rc == 1); - list_for_each_entry(entry, fn_list, node) - if (entry->feat_num == feat_num && entry->is_local == is_local) - return entry; - else if (entry->feat_num > feat_num) - break; - return NULL; + return rc; } -/** - * dccp_feat_entry_new - Central list update routine (called by all others) - * @head: list to add to - * @feat: feature number - * @local: whether the local (1) or remote feature with number @feat is meant - * This is the only constructor and serves to ensure the above invariants. - */ -static struct dccp_feat_entry * - dccp_feat_entry_new(struct list_head *head, u8 feat, bool local) +static int dccp_feat_nn(struct sock *sk, u8 type, u8 feature, u8 *val, u8 len) { - struct dccp_feat_entry *entry; - - list_for_each_entry(entry, head, node) - if (entry->feat_num == feat && entry->is_local == local) { - dccp_feat_val_destructor(entry->feat_num, &entry->val); - return entry; - } else if (entry->feat_num > feat) { - head = &entry->node; - break; - } + struct dccp_opt_pend *opt; + struct dccp_minisock *dmsk = dccp_msk(sk); + u8 *copy; + int rc; - entry = kmalloc(sizeof(*entry), gfp_any()); - if (entry != NULL) { - entry->feat_num = feat; - entry->is_local = local; - list_add_tail(&entry->node, head); + /* NN features must be Change L (sec. 6.3.2) */ + if (type != DCCPO_CHANGE_L) { + dccp_pr_debug("received %s for NN feature %d\n", + dccp_feat_typename(type), feature); + return -EFAULT; } - return entry; -} -/** - * dccp_feat_push_change - Add/overwrite a Change option in the list - * @fn_list: feature-negotiation list to update - * @feat: one of %dccp_feature_numbers - * @local: whether local (1) or remote (0) @feat_num is meant - * @needs_mandatory: whether to use Mandatory feature negotiation options - * @fval: pointer to NN/SP value to be inserted (will be copied) - */ -static int dccp_feat_push_change(struct list_head *fn_list, u8 feat, u8 local, - u8 mandatory, dccp_feat_val *fval) -{ - struct dccp_feat_entry *new = dccp_feat_entry_new(fn_list, feat, local); + /* XXX sanity check opt val */ - if (new == NULL) + /* copy option so we can confirm it */ + opt = kzalloc(sizeof(*opt), GFP_ATOMIC); + if (opt == NULL) return -ENOMEM; - new->feat_num = feat; - new->is_local = local; - new->state = FEAT_INITIALISING; - new->needs_confirm = 0; - new->empty_confirm = 0; - new->val = *fval; - new->needs_mandatory = mandatory; + copy = kmemdup(val, len, GFP_ATOMIC); + if (copy == NULL) { + kfree(opt); + return -ENOMEM; + } - return 0; -} + opt->dccpop_type = DCCPO_CONFIRM_R; /* NN can only confirm R */ + opt->dccpop_feat = feature; + opt->dccpop_val = copy; + opt->dccpop_len = len; -/** - * dccp_feat_push_confirm - Add a Confirm entry to the FN list - * @fn_list: feature-negotiation list to add to - * @feat: one of %dccp_feature_numbers - * @local: whether local (1) or remote (0) @feat_num is being confirmed - * @fval: pointer to NN/SP value to be inserted or NULL - * Returns 0 on success, a Reset code for further processing otherwise. - */ -static int dccp_feat_push_confirm(struct list_head *fn_list, u8 feat, u8 local, - dccp_feat_val *fval) -{ - struct dccp_feat_entry *new = dccp_feat_entry_new(fn_list, feat, local); + /* change feature */ + rc = dccp_feat_update(sk, type, feature, *val); + if (rc) { + kfree(opt->dccpop_val); + kfree(opt); + return rc; + } - if (new == NULL) - return DCCP_RESET_CODE_TOO_BUSY; + dccp_feat_debug(type, feature, *copy); - new->feat_num = feat; - new->is_local = local; - new->state = FEAT_STABLE; /* transition in 6.6.2 */ - new->needs_confirm = 1; - new->empty_confirm = (fval == NULL); - new->val.nn = 0; /* zeroes the whole structure */ - if (!new->empty_confirm) - new->val = *fval; - new->needs_mandatory = 0; + list_add_tail(&opt->dccpop_node, &dmsk->dccpms_conf); return 0; } -static int dccp_push_empty_confirm(struct list_head *fn_list, u8 feat, u8 local) +static void dccp_feat_empty_confirm(struct dccp_minisock *dmsk, + u8 type, u8 feature) { - return dccp_feat_push_confirm(fn_list, feat, local, NULL); -} + /* XXX check if other confirms for that are queued and recycle slot */ + struct dccp_opt_pend *opt = kzalloc(sizeof(*opt), GFP_ATOMIC); -static inline void dccp_feat_list_pop(struct dccp_feat_entry *entry) -{ - list_del(&entry->node); - dccp_feat_entry_destructor(entry); -} - -void dccp_feat_list_purge(struct list_head *fn_list) -{ - struct dccp_feat_entry *entry, *next; - - list_for_each_entry_safe(entry, next, fn_list, node) - dccp_feat_entry_destructor(entry); - INIT_LIST_HEAD(fn_list); -} -EXPORT_SYMBOL_GPL(dccp_feat_list_purge); - -/* generate @to as full clone of @from - @to must not contain any nodes */ -int dccp_feat_clone_list(struct list_head const *from, struct list_head *to) -{ - struct dccp_feat_entry *entry, *new; - - INIT_LIST_HEAD(to); - list_for_each_entry(entry, from, node) { - new = dccp_feat_clone_entry(entry); - if (new == NULL) - goto cloning_failed; - list_add_tail(&new->node, to); + if (opt == NULL) { + /* XXX what do we do? Ignoring should be fine. It's a change + * after all =P + */ + return; } - return 0; -cloning_failed: - dccp_feat_list_purge(to); - return -ENOMEM; -} + switch (type) { + case DCCPO_CHANGE_L: + opt->dccpop_type = DCCPO_CONFIRM_R; + break; + case DCCPO_CHANGE_R: + opt->dccpop_type = DCCPO_CONFIRM_L; + break; + default: + DCCP_WARN("invalid type %d\n", type); + kfree(opt); + return; + } + opt->dccpop_feat = feature; + opt->dccpop_val = NULL; + opt->dccpop_len = 0; -/** - * dccp_feat_valid_nn_length - Enforce length constraints on NN options - * Length is between 0 and %DCCP_OPTVAL_MAXLEN. Used for outgoing packets only, - * incoming options are accepted as long as their values are valid. - */ -static u8 dccp_feat_valid_nn_length(u8 feat_num) -{ - if (feat_num == DCCPF_ACK_RATIO) /* RFC 4340, 11.3 and 6.6.8 */ - return 2; - if (feat_num == DCCPF_SEQUENCE_WINDOW) /* RFC 4340, 7.5.2 and 6.5 */ - return 6; - return 0; -} + /* change feature */ + dccp_pr_debug("Empty %s(%d)\n", dccp_feat_typename(type), feature); -static u8 dccp_feat_is_valid_nn_val(u8 feat_num, u64 val) -{ - switch (feat_num) { - case DCCPF_ACK_RATIO: - return val <= DCCPF_ACK_RATIO_MAX; - case DCCPF_SEQUENCE_WINDOW: - return val >= DCCPF_SEQ_WMIN && val <= DCCPF_SEQ_WMAX; - } - return 0; /* feature unknown - so we can't tell */ + list_add_tail(&opt->dccpop_node, &dmsk->dccpms_conf); } -/* check that SP values are within the ranges defined in RFC 4340 */ -static u8 dccp_feat_is_valid_sp_val(u8 feat_num, u8 val) +static void dccp_feat_flush_confirm(struct sock *sk) { - switch (feat_num) { - case DCCPF_CCID: - return val == DCCPC_CCID2 || val == DCCPC_CCID3; - /* Type-check Boolean feature values: */ - case DCCPF_SHORT_SEQNOS: - case DCCPF_ECN_INCAPABLE: - case DCCPF_SEND_ACK_VECTOR: - case DCCPF_SEND_NDP_COUNT: - case DCCPF_DATA_CHECKSUM: - case DCCPF_SEND_LEV_RATE: - return val < 2; - case DCCPF_MIN_CSUM_COVER: - return val < 16; - } - return 0; /* feature unknown */ -} + struct dccp_minisock *dmsk = dccp_msk(sk); + /* Check if there is anything to confirm in the first place */ + int yes = !list_empty(&dmsk->dccpms_conf); -static u8 dccp_feat_sp_list_ok(u8 feat_num, u8 const *sp_list, u8 sp_len) -{ - if (sp_list == NULL || sp_len < 1) - return 0; - while (sp_len--) - if (!dccp_feat_is_valid_sp_val(feat_num, *sp_list++)) - return 0; - return 1; -} + if (!yes) { + struct dccp_opt_pend *opt; -/** - * dccp_feat_insert_opts - Generate FN options from current list state - * @skb: next sk_buff to be sent to the peer - * @dp: for client during handshake and general negotiation - * @dreq: used by the server only (all Changes/Confirms in LISTEN/RESPOND) - */ -int dccp_feat_insert_opts(struct dccp_sock *dp, struct dccp_request_sock *dreq, - struct sk_buff *skb) -{ - struct list_head *fn = dreq ? &dreq->dreq_featneg : &dp->dccps_featneg; - struct dccp_feat_entry *pos, *next; - u8 opt, type, len, *ptr, nn_in_nbo[DCCP_OPTVAL_MAXLEN]; - bool rpt; - - /* put entries into @skb in the order they appear in the list */ - list_for_each_entry_safe_reverse(pos, next, fn, node) { - opt = dccp_feat_genopt(pos); - type = dccp_feat_type(pos->feat_num); - rpt = false; - - if (pos->empty_confirm) { - len = 0; - ptr = NULL; - } else { - if (type == FEAT_SP) { - len = pos->val.sp.len; - ptr = pos->val.sp.vec; - rpt = pos->needs_confirm; - } else if (type == FEAT_NN) { - len = dccp_feat_valid_nn_length(pos->feat_num); - ptr = nn_in_nbo; - dccp_encode_value_var(pos->val.nn, ptr, len); - } else { - DCCP_BUG("unknown feature %u", pos->feat_num); - return -1; + list_for_each_entry(opt, &dmsk->dccpms_pending, dccpop_node) { + if (opt->dccpop_conf) { + yes = 1; + break; } } - dccp_feat_print_opt(opt, pos->feat_num, ptr, len, 0); - - if (dccp_insert_fn_opt(skb, opt, pos->feat_num, ptr, len, rpt)) - return -1; - if (pos->needs_mandatory && dccp_insert_option_mandatory(skb)) - return -1; - /* - * Enter CHANGING after transmitting the Change option (6.6.2). - */ - if (pos->state == FEAT_INITIALISING) - pos->state = FEAT_CHANGING; } - return 0; -} - -/** - * __feat_register_nn - Register new NN value on socket - * @fn: feature-negotiation list to register with - * @feat: an NN feature from %dccp_feature_numbers - * @mandatory: use Mandatory option if 1 - * @nn_val: value to register (restricted to 4 bytes) - * Note that NN features are local by definition (RFC 4340, 6.3.2). - */ -static int __feat_register_nn(struct list_head *fn, u8 feat, - u8 mandatory, u64 nn_val) -{ - dccp_feat_val fval = { .nn = nn_val }; - - if (dccp_feat_type(feat) != FEAT_NN || - !dccp_feat_is_valid_nn_val(feat, nn_val)) - return -EINVAL; - - /* Don't bother with default values, they will be activated anyway. */ - if (nn_val - (u64)dccp_feat_default_value(feat) == 0) - return 0; - - return dccp_feat_push_change(fn, feat, 1, mandatory, &fval); -} - -/** - * __feat_register_sp - Register new SP value/list on socket - * @fn: feature-negotiation list to register with - * @feat: an SP feature from %dccp_feature_numbers - * @is_local: whether the local (1) or the remote (0) @feat is meant - * @mandatory: use Mandatory option if 1 - * @sp_val: SP value followed by optional preference list - * @sp_len: length of @sp_val in bytes - */ -static int __feat_register_sp(struct list_head *fn, u8 feat, u8 is_local, - u8 mandatory, u8 const *sp_val, u8 sp_len) -{ - dccp_feat_val fval; - if (dccp_feat_type(feat) != FEAT_SP || - !dccp_feat_sp_list_ok(feat, sp_val, sp_len)) - return -EINVAL; - - /* Avoid negotiating alien CCIDs by only advertising supported ones */ - if (feat == DCCPF_CCID && !ccid_support_check(sp_val, sp_len)) - return -EOPNOTSUPP; - - if (dccp_feat_clone_sp_val(&fval, sp_val, sp_len)) - return -ENOMEM; + if (!yes) + return; - return dccp_feat_push_change(fn, feat, is_local, mandatory, &fval); + /* OK there is something to confirm... */ + /* XXX check if packet is in flight? Send delayed ack?? */ + if (sk->sk_state == DCCP_OPEN) + dccp_send_ack(sk); } -/** - * dccp_feat_register_sp - Register requests to change SP feature values - * @sk: client or listening socket - * @feat: one of %dccp_feature_numbers - * @is_local: whether the local (1) or remote (0) @feat is meant - * @list: array of preferred values, in descending order of preference - * @len: length of @list in bytes - */ -int dccp_feat_register_sp(struct sock *sk, u8 feat, u8 is_local, - u8 const *list, u8 len) -{ /* any changes must be registered before establishing the connection */ - if (sk->sk_state != DCCP_CLOSED) - return -EISCONN; - if (dccp_feat_type(feat) != FEAT_SP) - return -EINVAL; - return __feat_register_sp(&dccp_sk(sk)->dccps_featneg, feat, is_local, - 0, list, len); -} - -/* Analogous to dccp_feat_register_sp(), but for non-negotiable values */ -int dccp_feat_register_nn(struct sock *sk, u8 feat, u64 val) +int dccp_feat_change_recv(struct sock *sk, u8 type, u8 feature, u8 *val, u8 len) { - /* any changes must be registered before establishing the connection */ - if (sk->sk_state != DCCP_CLOSED) - return -EISCONN; - if (dccp_feat_type(feat) != FEAT_NN) - return -EINVAL; - return __feat_register_nn(&dccp_sk(sk)->dccps_featneg, feat, 0, val); -} + int rc; -/** - * dccp_feat_signal_nn_change - Update NN values for an established connection - * @sk: DCCP socket of an established connection - * @feat: NN feature number from %dccp_feature_numbers - * @nn_val: the new value to use - * This function is used to communicate NN updates out-of-band. The difference - * to feature negotiation during connection setup is that values are activated - * immediately after validation, i.e. we don't wait for the Confirm: either the - * value is accepted by the peer (and then the waiting is futile), or it is not - * (Reset or empty Confirm). We don't accept empty Confirms - transmitted values - * are validated, and the peer "MUST accept any valid value" (RFC 4340, 6.3.2). - */ -int dccp_feat_signal_nn_change(struct sock *sk, u8 feat, u64 nn_val) -{ - struct list_head *fn = &dccp_sk(sk)->dccps_featneg; - dccp_feat_val fval = { .nn = nn_val }; - struct dccp_feat_entry *entry; + dccp_feat_debug(type, feature, *val); - if (sk->sk_state != DCCP_OPEN && sk->sk_state != DCCP_PARTOPEN) - return 0; + /* figure out if it's SP or NN feature */ + switch (feature) { + /* deal with SP features */ + case DCCPF_CCID: + rc = dccp_feat_sp(sk, type, feature, val, len); + break; - if (dccp_feat_type(feat) != FEAT_NN || - !dccp_feat_is_valid_nn_val(feat, nn_val)) - return -EINVAL; + /* deal with NN features */ + case DCCPF_ACK_RATIO: + rc = dccp_feat_nn(sk, type, feature, val, len); + break; - entry = dccp_feat_list_lookup(fn, feat, 1); - if (entry != NULL) { - dccp_pr_debug("Ignoring %llu, entry %llu exists in state %s\n", - (unsigned long long)nn_val, - (unsigned long long)entry->val.nn, - dccp_feat_sname[entry->state]); - return 0; + /* XXX implement other features */ + default: + dccp_pr_debug("UNIMPLEMENTED: not handling %s(%d, ...)\n", + dccp_feat_typename(type), feature); + rc = -EFAULT; + break; } - if (dccp_feat_activate(sk, feat, 1, &fval)) - return -EADV; - - inet_csk_schedule_ack(sk); - return dccp_feat_push_change(fn, feat, 1, 0, &fval); -} -EXPORT_SYMBOL_GPL(dccp_feat_signal_nn_change); - -/* - * Tracking features whose value depend on the choice of CCID - * - * This is designed with an extension in mind so that a list walk could be done - * before activating any features. However, the existing framework was found to - * work satisfactorily up until now, the automatic verification is left open. - * When adding new CCIDs, add a corresponding dependency table here. - */ -static const struct ccid_dependency *dccp_feat_ccid_deps(u8 ccid, bool is_local) -{ - static const struct ccid_dependency ccid2_dependencies[2][2] = { - /* - * CCID2 mandates Ack Vectors (RFC 4341, 4.): as CCID is a TX - * feature and Send Ack Vector is an RX feature, `is_local' - * needs to be reversed. + /* check if there were problems changing features */ + if (rc) { + /* If we don't agree on SP, we sent a confirm for old value. + * However we propagate rc to caller in case option was + * mandatory */ - { /* Dependencies of the receiver-side (remote) CCID2 */ - { - .dependent_feat = DCCPF_SEND_ACK_VECTOR, - .is_local = true, - .is_mandatory = true, - .val = 1 - }, - { 0, 0, 0, 0 } - }, - { /* Dependencies of the sender-side (local) CCID2 */ - { - .dependent_feat = DCCPF_SEND_ACK_VECTOR, - .is_local = false, - .is_mandatory = true, - .val = 1 - }, - { 0, 0, 0, 0 } - } - }; - static const struct ccid_dependency ccid3_dependencies[2][5] = { - { /* - * Dependencies of the receiver-side CCID3 - */ - { /* locally disable Ack Vectors */ - .dependent_feat = DCCPF_SEND_ACK_VECTOR, - .is_local = true, - .is_mandatory = false, - .val = 0 - }, - { /* see below why Send Loss Event Rate is on */ - .dependent_feat = DCCPF_SEND_LEV_RATE, - .is_local = true, - .is_mandatory = true, - .val = 1 - }, - { /* NDP Count is needed as per RFC 4342, 6.1.1 */ - .dependent_feat = DCCPF_SEND_NDP_COUNT, - .is_local = false, - .is_mandatory = true, - .val = 1 - }, - { 0, 0, 0, 0 }, - }, - { /* - * CCID3 at the TX side: we request that the HC-receiver - * will not send Ack Vectors (they will be ignored, so - * Mandatory is not set); we enable Send Loss Event Rate - * (Mandatory since the implementation does not support - * the Loss Intervals option of RFC 4342, 8.6). - * The last two options are for peer's information only. - */ - { - .dependent_feat = DCCPF_SEND_ACK_VECTOR, - .is_local = false, - .is_mandatory = false, - .val = 0 - }, - { - .dependent_feat = DCCPF_SEND_LEV_RATE, - .is_local = false, - .is_mandatory = true, - .val = 1 - }, - { /* this CCID does not support Ack Ratio */ - .dependent_feat = DCCPF_ACK_RATIO, - .is_local = true, - .is_mandatory = false, - .val = 0 - }, - { /* tell receiver we are sending NDP counts */ - .dependent_feat = DCCPF_SEND_NDP_COUNT, - .is_local = true, - .is_mandatory = false, - .val = 1 - }, - { 0, 0, 0, 0 } - } - }; - switch (ccid) { - case DCCPC_CCID2: - return ccid2_dependencies[is_local]; - case DCCPC_CCID3: - return ccid3_dependencies[is_local]; - default: - return NULL; + if (rc != DCCP_FEAT_SP_NOAGREE) + dccp_feat_empty_confirm(dccp_msk(sk), type, feature); } -} -/** - * dccp_feat_propagate_ccid - Resolve dependencies of features on choice of CCID - * @fn: feature-negotiation list to update - * @id: CCID number to track - * @is_local: whether TX CCID (1) or RX CCID (0) is meant - * This function needs to be called after registering all other features. - */ -static int dccp_feat_propagate_ccid(struct list_head *fn, u8 id, bool is_local) -{ - const struct ccid_dependency *table = dccp_feat_ccid_deps(id, is_local); - int i, rc = (table == NULL); - - for (i = 0; rc == 0 && table[i].dependent_feat != DCCPF_RESERVED; i++) - if (dccp_feat_type(table[i].dependent_feat) == FEAT_SP) - rc = __feat_register_sp(fn, table[i].dependent_feat, - table[i].is_local, - table[i].is_mandatory, - &table[i].val, 1); - else - rc = __feat_register_nn(fn, table[i].dependent_feat, - table[i].is_mandatory, - table[i].val); - return rc; -} - -/** - * dccp_feat_finalise_settings - Finalise settings before starting negotiation - * @dp: client or listening socket (settings will be inherited) - * This is called after all registrations (socket initialisation, sysctls, and - * sockopt calls), and before sending the first packet containing Change options - * (ie. client-Request or server-Response), to ensure internal consistency. - */ -int dccp_feat_finalise_settings(struct dccp_sock *dp) -{ - struct list_head *fn = &dp->dccps_featneg; - struct dccp_feat_entry *entry; - int i = 2, ccids[2] = { -1, -1 }; + /* generate the confirm [if required] */ + dccp_feat_flush_confirm(sk); - /* - * Propagating CCIDs: - * 1) not useful to propagate CCID settings if this host advertises more - * than one CCID: the choice of CCID may still change - if this is - * the client, or if this is the server and the client sends - * singleton CCID values. - * 2) since is that propagate_ccid changes the list, we defer changing - * the sorted list until after the traversal. - */ - list_for_each_entry(entry, fn, node) - if (entry->feat_num == DCCPF_CCID && entry->val.sp.len == 1) - ccids[entry->is_local] = entry->val.sp.vec[0]; - while (i--) - if (ccids[i] > 0 && dccp_feat_propagate_ccid(fn, ccids[i], i)) - return -1; - dccp_feat_print_fnlist(fn); - return 0; + return rc; } -/** - * dccp_feat_server_ccid_dependencies - Resolve CCID-dependent features - * It is the server which resolves the dependencies once the CCID has been - * fully negotiated. If no CCID has been negotiated, it uses the default CCID. - */ -int dccp_feat_server_ccid_dependencies(struct dccp_request_sock *dreq) -{ - struct list_head *fn = &dreq->dreq_featneg; - struct dccp_feat_entry *entry; - u8 is_local, ccid; - - for (is_local = 0; is_local <= 1; is_local++) { - entry = dccp_feat_list_lookup(fn, DCCPF_CCID, is_local); - - if (entry != NULL && !entry->empty_confirm) - ccid = entry->val.sp.vec[0]; - else - ccid = dccp_feat_default_value(DCCPF_CCID); - - if (dccp_feat_propagate_ccid(fn, ccid, is_local)) - return -1; - } - return 0; -} +EXPORT_SYMBOL_GPL(dccp_feat_change_recv); -/* Select the first entry in @servlist that also occurs in @clilist (6.3.1) */ -static int dccp_feat_preflist_match(u8 *servlist, u8 slen, u8 *clilist, u8 clen) +int dccp_feat_confirm_recv(struct sock *sk, u8 type, u8 feature, + u8 *val, u8 len) { - u8 c, s; + u8 t; + struct dccp_opt_pend *opt; + struct dccp_minisock *dmsk = dccp_msk(sk); + int found = 0; + int all_confirmed = 1; - for (s = 0; s < slen; s++) - for (c = 0; c < clen; c++) - if (servlist[s] == clilist[c]) - return servlist[s]; - return -1; -} + dccp_feat_debug(type, feature, *val); -/** - * dccp_feat_prefer - Move preferred entry to the start of array - * Reorder the @array_len elements in @array so that @preferred_value comes - * first. Returns >0 to indicate that @preferred_value does occur in @array. - */ -static u8 dccp_feat_prefer(u8 preferred_value, u8 *array, u8 array_len) -{ - u8 i, does_occur = 0; + /* locate our change request */ + switch (type) { + case DCCPO_CONFIRM_L: t = DCCPO_CHANGE_R; break; + case DCCPO_CONFIRM_R: t = DCCPO_CHANGE_L; break; + default: DCCP_WARN("invalid type %d\n", type); + return 1; - if (array != NULL) { - for (i = 0; i < array_len; i++) - if (array[i] == preferred_value) { - array[i] = array[0]; - does_occur++; - } - if (does_occur) - array[0] = preferred_value; } - return does_occur; -} + /* XXX sanity check feature value */ -/** - * dccp_feat_reconcile - Reconcile SP preference lists - * @fval: SP list to reconcile into - * @arr: received SP preference list - * @len: length of @arr in bytes - * @is_server: whether this side is the server (and @fv is the server's list) - * @reorder: whether to reorder the list in @fv after reconciling with @arr - * When successful, > 0 is returned and the reconciled list is in @fval. - * A value of 0 means that negotiation failed (no shared entry). - */ -static int dccp_feat_reconcile(dccp_feat_val *fv, u8 *arr, u8 len, - bool is_server, bool reorder) -{ - int rc; + list_for_each_entry(opt, &dmsk->dccpms_pending, dccpop_node) { + if (!opt->dccpop_conf && opt->dccpop_type == t && + opt->dccpop_feat == feature) { + found = 1; + dccp_pr_debug("feature %d found\n", opt->dccpop_feat); - if (!fv->sp.vec || !arr) { - DCCP_CRIT("NULL feature value or array"); - return 0; - } + /* XXX do sanity check */ - if (is_server) - rc = dccp_feat_preflist_match(fv->sp.vec, fv->sp.len, arr, len); - else - rc = dccp_feat_preflist_match(arr, len, fv->sp.vec, fv->sp.len); - - if (!reorder) - return rc; - if (rc < 0) - return 0; + opt->dccpop_conf = 1; - /* - * Reorder list: used for activating features and in dccp_insert_fn_opt. - */ - return dccp_feat_prefer(rc, fv->sp.vec, fv->sp.len); -} + /* We got a confirmation---change the option */ + dccp_feat_update(sk, opt->dccpop_type, + opt->dccpop_feat, *val); -/** - * dccp_feat_change_recv - Process incoming ChangeL/R options - * @fn: feature-negotiation list to update - * @is_mandatory: whether the Change was preceded by a Mandatory option - * @opt: %DCCPO_CHANGE_L or %DCCPO_CHANGE_R - * @feat: one of %dccp_feature_numbers - * @val: NN value or SP value/preference list - * @len: length of @val in bytes - * @server: whether this node is the server (1) or the client (0) - */ -static u8 dccp_feat_change_recv(struct list_head *fn, u8 is_mandatory, u8 opt, - u8 feat, u8 *val, u8 len, const bool server) -{ - u8 defval, type = dccp_feat_type(feat); - const bool local = (opt == DCCPO_CHANGE_R); - struct dccp_feat_entry *entry; - dccp_feat_val fval; - - if (len == 0 || type == FEAT_UNKNOWN) /* 6.1 and 6.6.8 */ - goto unknown_feature_or_value; - - dccp_feat_print_opt(opt, feat, val, len, is_mandatory); - - /* - * Negotiation of NN features: Change R is invalid, so there is no - * simultaneous negotiation; hence we do not look up in the list. - */ - if (type == FEAT_NN) { - if (local || len > sizeof(fval.nn)) - goto unknown_feature_or_value; - - /* 6.3.2: "The feature remote MUST accept any valid value..." */ - fval.nn = dccp_decode_value_var(val, len); - if (!dccp_feat_is_valid_nn_val(feat, fval.nn)) - goto unknown_feature_or_value; + /* XXX check the return value of dccp_feat_update */ + break; + } - return dccp_feat_push_confirm(fn, feat, local, &fval); + if (!opt->dccpop_conf) + all_confirmed = 0; } - /* - * Unidirectional/simultaneous negotiation of SP features (6.3.1) + /* fix re-transmit timer */ + /* XXX gotta make sure that no option negotiation occurs during + * connection shutdown. Consider that the CLOSEREQ is sent and timer is + * on. if all options are confirmed it might kill timer which should + * remain alive until close is received. */ - entry = dccp_feat_list_lookup(fn, feat, local); - if (entry == NULL) { - /* - * No particular preferences have been registered. We deal with - * this situation by assuming that all valid values are equally - * acceptable, and apply the following checks: - * - if the peer's list is a singleton, we accept a valid value; - * - if we are the server, we first try to see if the peer (the - * client) advertises the default value. If yes, we use it, - * otherwise we accept the preferred value; - * - else if we are the client, we use the first list element. - */ - if (dccp_feat_clone_sp_val(&fval, val, 1)) - return DCCP_RESET_CODE_TOO_BUSY; - - if (len > 1 && server) { - defval = dccp_feat_default_value(feat); - if (dccp_feat_preflist_match(&defval, 1, val, len) > -1) - fval.sp.vec[0] = defval; - } else if (!dccp_feat_is_valid_sp_val(feat, fval.sp.vec[0])) { - kfree(fval.sp.vec); - goto unknown_feature_or_value; - } - - /* Treat unsupported CCIDs like invalid values */ - if (feat == DCCPF_CCID && !ccid_support_check(fval.sp.vec, 1)) { - kfree(fval.sp.vec); - goto not_valid_or_not_known; - } - - return dccp_feat_push_confirm(fn, feat, local, &fval); - - } else if (entry->state == FEAT_UNSTABLE) { /* 6.6.2 */ - return 0; + if (all_confirmed) { + dccp_pr_debug("clear feat negotiation timer %p\n", sk); + inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS); } - if (dccp_feat_reconcile(&entry->val, val, len, server, true)) { - entry->empty_confirm = 0; - } else if (is_mandatory) { - return DCCP_RESET_CODE_MANDATORY_ERROR; - } else if (entry->state == FEAT_INITIALISING) { - /* - * Failed simultaneous negotiation (server only): try to `save' - * the connection by checking whether entry contains the default - * value for @feat. If yes, send an empty Confirm to signal that - * the received Change was not understood - which implies using - * the default value. - * If this also fails, we use Reset as the last resort. - */ - WARN_ON(!server); - defval = dccp_feat_default_value(feat); - if (!dccp_feat_reconcile(&entry->val, &defval, 1, server, true)) - return DCCP_RESET_CODE_OPTION_ERROR; - entry->empty_confirm = 1; - } - entry->needs_confirm = 1; - entry->needs_mandatory = 0; - entry->state = FEAT_STABLE; + if (!found) + dccp_pr_debug("%s(%d, ...) never requested\n", + dccp_feat_typename(type), feature); return 0; - -unknown_feature_or_value: - if (!is_mandatory) - return dccp_push_empty_confirm(fn, feat, local); - -not_valid_or_not_known: - return is_mandatory ? DCCP_RESET_CODE_MANDATORY_ERROR - : DCCP_RESET_CODE_OPTION_ERROR; } -/** - * dccp_feat_confirm_recv - Process received Confirm options - * @fn: feature-negotiation list to update - * @is_mandatory: whether @opt was preceded by a Mandatory option - * @opt: %DCCPO_CONFIRM_L or %DCCPO_CONFIRM_R - * @feat: one of %dccp_feature_numbers - * @val: NN value or SP value/preference list - * @len: length of @val in bytes - * @server: whether this node is server (1) or client (0) - */ -static u8 dccp_feat_confirm_recv(struct list_head *fn, u8 is_mandatory, u8 opt, - u8 feat, u8 *val, u8 len, const bool server) -{ - u8 *plist, plen, type = dccp_feat_type(feat); - const bool local = (opt == DCCPO_CONFIRM_R); - struct dccp_feat_entry *entry = dccp_feat_list_lookup(fn, feat, local); - - dccp_feat_print_opt(opt, feat, val, len, is_mandatory); - - if (entry == NULL) { /* nothing queued: ignore or handle error */ - if (is_mandatory && type == FEAT_UNKNOWN) - return DCCP_RESET_CODE_MANDATORY_ERROR; - - if (!local && type == FEAT_NN) /* 6.3.2 */ - goto confirmation_failed; - return 0; - } - - if (entry->state != FEAT_CHANGING) /* 6.6.2 */ - return 0; - - if (len == 0) { - if (dccp_feat_must_be_understood(feat)) /* 6.6.7 */ - goto confirmation_failed; - /* - * Empty Confirm during connection setup: this means reverting - * to the `old' value, which in this case is the default. Since - * we handle default values automatically when no other values - * have been set, we revert to the old value by removing this - * entry from the list. - */ - dccp_feat_list_pop(entry); - return 0; - } +EXPORT_SYMBOL_GPL(dccp_feat_confirm_recv); - if (type == FEAT_NN) { - if (len > sizeof(entry->val.nn)) - goto confirmation_failed; +void dccp_feat_clean(struct dccp_minisock *dmsk) +{ + struct dccp_opt_pend *opt, *next; - if (entry->val.nn == dccp_decode_value_var(val, len)) - goto confirmation_succeeded; + list_for_each_entry_safe(opt, next, &dmsk->dccpms_pending, + dccpop_node) { + BUG_ON(opt->dccpop_val == NULL); + kfree(opt->dccpop_val); - DCCP_WARN("Bogus Confirm for non-existing value\n"); - goto confirmation_failed; - } + if (opt->dccpop_sc != NULL) { + BUG_ON(opt->dccpop_sc->dccpoc_val == NULL); + kfree(opt->dccpop_sc->dccpoc_val); + kfree(opt->dccpop_sc); + } - /* - * Parsing SP Confirms: the first element of @val is the preferred - * SP value which the peer confirms, the remainder depends on @len. - * Note that only the confirmed value need to be a valid SP value. - */ - if (!dccp_feat_is_valid_sp_val(feat, *val)) - goto confirmation_failed; - - if (len == 1) { /* peer didn't supply a preference list */ - plist = val; - plen = len; - } else { /* preferred value + preference list */ - plist = val + 1; - plen = len - 1; + kfree(opt); } + INIT_LIST_HEAD(&dmsk->dccpms_pending); - /* Check whether the peer got the reconciliation right (6.6.8) */ - if (dccp_feat_reconcile(&entry->val, plist, plen, server, 0) != *val) { - DCCP_WARN("Confirm selected the wrong value %u\n", *val); - return DCCP_RESET_CODE_OPTION_ERROR; + list_for_each_entry_safe(opt, next, &dmsk->dccpms_conf, dccpop_node) { + BUG_ON(opt == NULL); + if (opt->dccpop_val != NULL) + kfree(opt->dccpop_val); + kfree(opt); } - entry->val.sp.vec[0] = *val; - -confirmation_succeeded: - entry->state = FEAT_STABLE; - return 0; - -confirmation_failed: - DCCP_WARN("Confirmation failed\n"); - return is_mandatory ? DCCP_RESET_CODE_MANDATORY_ERROR - : DCCP_RESET_CODE_OPTION_ERROR; + INIT_LIST_HEAD(&dmsk->dccpms_conf); } -/** - * dccp_feat_handle_nn_established - Fast-path reception of NN options - * @sk: socket of an established DCCP connection - * @mandatory: whether @opt was preceded by a Mandatory option - * @opt: %DCCPO_CHANGE_L | %DCCPO_CONFIRM_R (NN only) - * @feat: NN number, one of %dccp_feature_numbers - * @val: NN value - * @len: length of @val in bytes - * This function combines the functionality of change_recv/confirm_recv, with - * the following differences (reset codes are the same): - * - cleanup after receiving the Confirm; - * - values are directly activated after successful parsing; - * - deliberately restricted to NN features. - * The restriction to NN features is essential since SP features can have non- - * predictable outcomes (depending on the remote configuration), and are inter- - * dependent (CCIDs for instance cause further dependencies). +EXPORT_SYMBOL_GPL(dccp_feat_clean); + +/* this is to be called only when a listening sock creates its child. It is + * assumed by the function---the confirm is not duplicated, but rather it is + * "passed on". */ -static u8 dccp_feat_handle_nn_established(struct sock *sk, u8 mandatory, u8 opt, - u8 feat, u8 *val, u8 len) +int dccp_feat_clone(struct sock *oldsk, struct sock *newsk) { - struct list_head *fn = &dccp_sk(sk)->dccps_featneg; - const bool local = (opt == DCCPO_CONFIRM_R); - struct dccp_feat_entry *entry; - u8 type = dccp_feat_type(feat); - dccp_feat_val fval; + struct dccp_minisock *olddmsk = dccp_msk(oldsk); + struct dccp_minisock *newdmsk = dccp_msk(newsk); + struct dccp_opt_pend *opt; + int rc = 0; - dccp_feat_print_opt(opt, feat, val, len, mandatory); + INIT_LIST_HEAD(&newdmsk->dccpms_pending); + INIT_LIST_HEAD(&newdmsk->dccpms_conf); - /* Ignore non-mandatory unknown and non-NN features */ - if (type == FEAT_UNKNOWN) { - if (local && !mandatory) - return 0; - goto fast_path_unknown; - } else if (type != FEAT_NN) { - return 0; - } - - /* - * We don't accept empty Confirms, since in fast-path feature - * negotiation the values are enabled immediately after sending - * the Change option. - * Empty Changes on the other hand are invalid (RFC 4340, 6.1). - */ - if (len == 0 || len > sizeof(fval.nn)) - goto fast_path_unknown; - - if (opt == DCCPO_CHANGE_L) { - fval.nn = dccp_decode_value_var(val, len); - if (!dccp_feat_is_valid_nn_val(feat, fval.nn)) - goto fast_path_unknown; + list_for_each_entry(opt, &olddmsk->dccpms_pending, dccpop_node) { + struct dccp_opt_pend *newopt; + /* copy the value of the option */ + u8 *val = kmemdup(opt->dccpop_val, opt->dccpop_len, GFP_ATOMIC); - if (dccp_feat_push_confirm(fn, feat, local, &fval) || - dccp_feat_activate(sk, feat, local, &fval)) - return DCCP_RESET_CODE_TOO_BUSY; + if (val == NULL) + goto out_clean; - /* set the `Ack Pending' flag to piggyback a Confirm */ - inet_csk_schedule_ack(sk); - - } else if (opt == DCCPO_CONFIRM_R) { - entry = dccp_feat_list_lookup(fn, feat, local); - if (entry == NULL || entry->state != FEAT_CHANGING) - return 0; - - fval.nn = dccp_decode_value_var(val, len); - if (fval.nn != entry->val.nn) { - DCCP_WARN("Bogus Confirm for non-existing value\n"); - goto fast_path_failed; + newopt = kmemdup(opt, sizeof(*newopt), GFP_ATOMIC); + if (newopt == NULL) { + kfree(val); + goto out_clean; } - /* It has been confirmed - so remove the entry */ - dccp_feat_list_pop(entry); + /* insert the option */ + newopt->dccpop_val = val; + list_add_tail(&newopt->dccpop_node, &newdmsk->dccpms_pending); - } else { - DCCP_WARN("Received illegal option %u\n", opt); - goto fast_path_failed; + /* XXX what happens with backlogs and multiple connections at + * once... + */ + /* the master socket no longer needs to worry about confirms */ + opt->dccpop_sc = NULL; /* it's not a memleak---new socket has it */ + + /* reset state for a new socket */ + opt->dccpop_conf = 0; } - return 0; -fast_path_unknown: - if (!mandatory) - return dccp_push_empty_confirm(fn, feat, local); + /* XXX not doing anything about the conf queue */ + +out: + return rc; -fast_path_failed: - return mandatory ? DCCP_RESET_CODE_MANDATORY_ERROR - : DCCP_RESET_CODE_OPTION_ERROR; +out_clean: + dccp_feat_clean(newdmsk); + rc = -ENOMEM; + goto out; } -/** - * dccp_feat_parse_options - Process Feature-Negotiation Options - * @sk: for general use and used by the client during connection setup - * @dreq: used by the server during connection setup - * @mandatory: whether @opt was preceded by a Mandatory option - * @opt: %DCCPO_CHANGE_L | %DCCPO_CHANGE_R | %DCCPO_CONFIRM_L | %DCCPO_CONFIRM_R - * @feat: one of %dccp_feature_numbers - * @val: value contents of @opt - * @len: length of @val in bytes - * Returns 0 on success, a Reset code for ending the connection otherwise. - */ -int dccp_feat_parse_options(struct sock *sk, struct dccp_request_sock *dreq, - u8 mandatory, u8 opt, u8 feat, u8 *val, u8 len) +EXPORT_SYMBOL_GPL(dccp_feat_clone); + +static int __dccp_feat_init(struct dccp_minisock *dmsk, u8 type, u8 feat, + u8 *val, u8 len) { - struct dccp_sock *dp = dccp_sk(sk); - struct list_head *fn = dreq ? &dreq->dreq_featneg : &dp->dccps_featneg; - bool server = false; + int rc = -ENOMEM; + u8 *copy = kmemdup(val, len, GFP_KERNEL); - switch (sk->sk_state) { - /* - * Negotiation during connection setup - */ - case DCCP_LISTEN: - server = true; /* fall through */ - case DCCP_REQUESTING: - switch (opt) { - case DCCPO_CHANGE_L: - case DCCPO_CHANGE_R: - return dccp_feat_change_recv(fn, mandatory, opt, feat, - val, len, server); - case DCCPO_CONFIRM_R: - case DCCPO_CONFIRM_L: - return dccp_feat_confirm_recv(fn, mandatory, opt, feat, - val, len, server); - } - break; - /* - * Support for exchanging NN options on an established connection - * This is currently restricted to Ack Ratio (RFC 4341, 6.1.2) - */ - case DCCP_OPEN: - case DCCP_PARTOPEN: - return dccp_feat_handle_nn_established(sk, mandatory, opt, feat, - val, len); + if (copy != NULL) { + rc = dccp_feat_change(dmsk, type, feat, copy, len, GFP_KERNEL); + if (rc) + kfree(copy); } - return 0; /* ignore FN options in all other states */ + return rc; } -/** - * dccp_feat_init - Seed feature negotiation with host-specific defaults - * This initialises global defaults, depending on the value of the sysctls. - * These can later be overridden by registering changes via setsockopt calls. - * The last link in the chain is finalise_settings, to make sure that between - * here and the start of actual feature negotiation no inconsistencies enter. - * - * All features not appearing below use either defaults or are otherwise - * later adjusted through dccp_feat_finalise_settings(). - */ -int dccp_feat_init(struct sock *sk) +int dccp_feat_init(struct dccp_minisock *dmsk) { - struct list_head *fn = &dccp_sk(sk)->dccps_featneg; - u8 on = 1, off = 0; int rc; - struct { - u8 *val; - u8 len; - } tx, rx; - - /* Non-negotiable (NN) features */ - rc = __feat_register_nn(fn, DCCPF_SEQUENCE_WINDOW, 0, - sysctl_dccp_sequence_window); - if (rc) - return rc; - /* Server-priority (SP) features */ - - /* Advertise that short seqnos are not supported (7.6.1) */ - rc = __feat_register_sp(fn, DCCPF_SHORT_SEQNOS, true, true, &off, 1); - if (rc) - return rc; + INIT_LIST_HEAD(&dmsk->dccpms_pending); + INIT_LIST_HEAD(&dmsk->dccpms_conf); - /* RFC 4340 12.1: "If a DCCP is not ECN capable, ..." */ - rc = __feat_register_sp(fn, DCCPF_ECN_INCAPABLE, true, true, &on, 1); + /* CCID L */ + rc = __dccp_feat_init(dmsk, DCCPO_CHANGE_L, DCCPF_CCID, + &dmsk->dccpms_tx_ccid, 1); if (rc) - return rc; - - /* - * We advertise the available list of CCIDs and reorder according to - * preferences, to avoid failure resulting from negotiating different - * singleton values (which always leads to failure). - * These settings can still (later) be overridden via sockopts. - */ - if (ccid_get_builtin_ccids(&tx.val, &tx.len) || - ccid_get_builtin_ccids(&rx.val, &rx.len)) - return -ENOBUFS; - - /* Pre-load all CCID modules that are going to be advertised */ - rc = -EUNATCH; - if (ccid_request_modules(tx.val, tx.len)) - goto free_ccid_lists; - - if (!dccp_feat_prefer(sysctl_dccp_tx_ccid, tx.val, tx.len) || - !dccp_feat_prefer(sysctl_dccp_rx_ccid, rx.val, rx.len)) - goto free_ccid_lists; + goto out; - rc = __feat_register_sp(fn, DCCPF_CCID, true, false, tx.val, tx.len); + /* CCID R */ + rc = __dccp_feat_init(dmsk, DCCPO_CHANGE_R, DCCPF_CCID, + &dmsk->dccpms_rx_ccid, 1); if (rc) - goto free_ccid_lists; + goto out; - rc = __feat_register_sp(fn, DCCPF_CCID, false, false, rx.val, rx.len); - -free_ccid_lists: - kfree(tx.val); - kfree(rx.val); + /* Ack ratio */ + rc = __dccp_feat_init(dmsk, DCCPO_CHANGE_L, DCCPF_ACK_RATIO, + &dmsk->dccpms_ack_ratio, 1); +out: return rc; } -int dccp_feat_activate_values(struct sock *sk, struct list_head *fn_list) -{ - struct dccp_sock *dp = dccp_sk(sk); - struct dccp_feat_entry *cur, *next; - int idx; - dccp_feat_val *fvals[DCCP_FEAT_SUPPORTED_MAX][2] = { - [0 ... DCCP_FEAT_SUPPORTED_MAX-1] = { NULL, NULL } - }; - - list_for_each_entry(cur, fn_list, node) { - /* - * An empty Confirm means that either an unknown feature type - * or an invalid value was present. In the first case there is - * nothing to activate, in the other the default value is used. - */ - if (cur->empty_confirm) - continue; +EXPORT_SYMBOL_GPL(dccp_feat_init); - idx = dccp_feat_index(cur->feat_num); - if (idx < 0) { - DCCP_BUG("Unknown feature %u", cur->feat_num); - goto activation_failed; - } - if (cur->state != FEAT_STABLE) { - DCCP_CRIT("Negotiation of %s %s failed in state %s", - cur->is_local ? "local" : "remote", - dccp_feat_fname(cur->feat_num), - dccp_feat_sname[cur->state]); - goto activation_failed; - } - fvals[idx][cur->is_local] = &cur->val; +#ifdef CONFIG_IP_DCCP_DEBUG +const char *dccp_feat_typename(const u8 type) +{ + switch(type) { + case DCCPO_CHANGE_L: return("ChangeL"); + case DCCPO_CONFIRM_L: return("ConfirmL"); + case DCCPO_CHANGE_R: return("ChangeR"); + case DCCPO_CONFIRM_R: return("ConfirmR"); + /* the following case must not appear in feature negotation */ + default: dccp_pr_debug("unknown type %d [BUG!]\n", type); } + return NULL; +} - /* - * Activate in decreasing order of index, so that the CCIDs are always - * activated as the last feature. This avoids the case where a CCID - * relies on the initialisation of one or more features that it depends - * on (e.g. Send NDP Count, Send Ack Vector, and Ack Ratio features). - */ - for (idx = DCCP_FEAT_SUPPORTED_MAX; --idx >= 0;) - if (__dccp_feat_activate(sk, idx, 0, fvals[idx][0]) || - __dccp_feat_activate(sk, idx, 1, fvals[idx][1])) { - DCCP_CRIT("Could not activate %d", idx); - goto activation_failed; - } +EXPORT_SYMBOL_GPL(dccp_feat_typename); - /* Clean up Change options which have been confirmed already */ - list_for_each_entry_safe(cur, next, fn_list, node) - if (!cur->needs_confirm) - dccp_feat_list_pop(cur); +const char *dccp_feat_name(const u8 feat) +{ + static const char *feature_names[] = { + [DCCPF_RESERVED] = "Reserved", + [DCCPF_CCID] = "CCID", + [DCCPF_SHORT_SEQNOS] = "Allow Short Seqnos", + [DCCPF_SEQUENCE_WINDOW] = "Sequence Window", + [DCCPF_ECN_INCAPABLE] = "ECN Incapable", + [DCCPF_ACK_RATIO] = "Ack Ratio", + [DCCPF_SEND_ACK_VECTOR] = "Send ACK Vector", + [DCCPF_SEND_NDP_COUNT] = "Send NDP Count", + [DCCPF_MIN_CSUM_COVER] = "Min. Csum Coverage", + [DCCPF_DATA_CHECKSUM] = "Send Data Checksum", + }; + if (feat > DCCPF_DATA_CHECKSUM && feat < DCCPF_MIN_CCID_SPECIFIC) + return feature_names[DCCPF_RESERVED]; - dccp_pr_debug("Activation OK\n"); - return 0; + if (feat >= DCCPF_MIN_CCID_SPECIFIC) + return "CCID-specific"; -activation_failed: - /* - * We clean up everything that may have been allocated, since - * it is difficult to track at which stage negotiation failed. - * This is ok, since all allocation functions below are robust - * against NULL arguments. - */ - ccid_hc_rx_delete(dp->dccps_hc_rx_ccid, sk); - ccid_hc_tx_delete(dp->dccps_hc_tx_ccid, sk); - dp->dccps_hc_rx_ccid = dp->dccps_hc_tx_ccid = NULL; - dccp_ackvec_free(dp->dccps_hc_rx_ackvec); - dp->dccps_hc_rx_ackvec = NULL; - return -1; + return feature_names[feat]; } + +EXPORT_SYMBOL_GPL(dccp_feat_name); +#endif /* CONFIG_IP_DCCP_DEBUG */ diff --git a/net/dccp/feat.h b/net/dccp/feat.h index 2217066e22d..e272222c7ac 100644 --- a/net/dccp/feat.h +++ b/net/dccp/feat.h @@ -3,134 +3,38 @@ /* * net/dccp/feat.h * - * Feature negotiation for the DCCP protocol (RFC 4340, section 6) - * Copyright (c) 2008 Gerrit Renker + * An implementation of the DCCP protocol * Copyright (c) 2005 Andrea Bittau * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. */ + #include #include "dccp.h" -/* - * Known limit values - */ -/* Ack Ratio takes 2-byte integer values (11.3) */ -#define DCCPF_ACK_RATIO_MAX 0xFFFF -/* Wmin=32 and Wmax=2^46-1 from 7.5.2 */ -#define DCCPF_SEQ_WMIN 32 -#define DCCPF_SEQ_WMAX 0x3FFFFFFFFFFFull -/* Maximum number of SP values that fit in a single (Confirm) option */ -#define DCCP_FEAT_MAX_SP_VALS (DCCP_SINGLE_OPT_MAXLEN - 2) - -enum dccp_feat_type { - FEAT_AT_RX = 1, /* located at RX side of half-connection */ - FEAT_AT_TX = 2, /* located at TX side of half-connection */ - FEAT_SP = 4, /* server-priority reconciliation (6.3.1) */ - FEAT_NN = 8, /* non-negotiable reconciliation (6.3.2) */ - FEAT_UNKNOWN = 0xFF /* not understood or invalid feature */ -}; - -enum dccp_feat_state { - FEAT_DEFAULT = 0, /* using default values from 6.4 */ - FEAT_INITIALISING, /* feature is being initialised */ - FEAT_CHANGING, /* Change sent but not confirmed yet */ - FEAT_UNSTABLE, /* local modification in state CHANGING */ - FEAT_STABLE /* both ends (think they) agree */ -}; +#ifdef CONFIG_IP_DCCP_DEBUG +extern const char *dccp_feat_typename(const u8 type); +extern const char *dccp_feat_name(const u8 feat); -/** - * dccp_feat_val - Container for SP or NN feature values - * @nn: single NN value - * @sp.vec: single SP value plus optional preference list - * @sp.len: length of @sp.vec in bytes - */ -typedef union { - u64 nn; - struct { - u8 *vec; - u8 len; - } sp; -} dccp_feat_val; - -/** - * struct feat_entry - Data structure to perform feature negotiation - * @feat_num: one of %dccp_feature_numbers - * @val: feature's current value (SP features may have preference list) - * @state: feature's current state - * @needs_mandatory: whether Mandatory options should be sent - * @needs_confirm: whether to send a Confirm instead of a Change - * @empty_confirm: whether to send an empty Confirm (depends on @needs_confirm) - * @is_local: feature location (1) or feature-remote (0) - * @node: list pointers, entries arranged in FIFO order - */ -struct dccp_feat_entry { - u8 feat_num; - dccp_feat_val val; - enum dccp_feat_state state:8; - bool needs_mandatory:1, - needs_confirm:1, - empty_confirm:1, - is_local:1; - - struct list_head node; -}; - -static inline u8 dccp_feat_genopt(struct dccp_feat_entry *entry) +static inline void dccp_feat_debug(const u8 type, const u8 feat, const u8 val) { - if (entry->needs_confirm) - return entry->is_local ? DCCPO_CONFIRM_L : DCCPO_CONFIRM_R; - return entry->is_local ? DCCPO_CHANGE_L : DCCPO_CHANGE_R; + dccp_pr_debug("%s(%s (%d), %d)\n", dccp_feat_typename(type), + dccp_feat_name(feat), feat, val); } +#else +#define dccp_feat_debug(type, feat, val) +#endif /* CONFIG_IP_DCCP_DEBUG */ + +extern int dccp_feat_change(struct dccp_minisock *dmsk, u8 type, u8 feature, + u8 *val, u8 len, gfp_t gfp); +extern int dccp_feat_change_recv(struct sock *sk, u8 type, u8 feature, + u8 *val, u8 len); +extern int dccp_feat_confirm_recv(struct sock *sk, u8 type, u8 feature, + u8 *val, u8 len); +extern void dccp_feat_clean(struct dccp_minisock *dmsk); +extern int dccp_feat_clone(struct sock *oldsk, struct sock *newsk); +extern int dccp_feat_init(struct dccp_minisock *dmsk); -/** - * struct ccid_dependency - Track changes resulting from choosing a CCID - * @dependent_feat: one of %dccp_feature_numbers - * @is_local: local (1) or remote (0) @dependent_feat - * @is_mandatory: whether presence of @dependent_feat is mission-critical or not - * @val: corresponding default value for @dependent_feat (u8 is sufficient here) - */ -struct ccid_dependency { - u8 dependent_feat; - bool is_local:1, - is_mandatory:1; - u8 val; -}; - -/* - * Sysctls to seed defaults for feature negotiation - */ -extern unsigned long sysctl_dccp_sequence_window; -extern int sysctl_dccp_rx_ccid; -extern int sysctl_dccp_tx_ccid; - -extern int dccp_feat_init(struct sock *sk); -extern void dccp_feat_initialise_sysctls(void); -extern int dccp_feat_register_sp(struct sock *sk, u8 feat, u8 is_local, - u8 const *list, u8 len); -extern int dccp_feat_register_nn(struct sock *sk, u8 feat, u64 val); -extern int dccp_feat_parse_options(struct sock *, struct dccp_request_sock *, - u8 mand, u8 opt, u8 feat, u8 *val, u8 len); -extern int dccp_feat_clone_list(struct list_head const *, struct list_head *); - -/* - * Encoding variable-length options and their maximum length. - * - * This affects NN options (SP options are all u8) and other variable-length - * options (see table 3 in RFC 4340). The limit is currently given the Sequence - * Window NN value (sec. 7.5.2) and the NDP count (sec. 7.7) option, all other - * options consume less than 6 bytes (timestamps are 4 bytes). - * When updating this constant (e.g. due to new internet drafts / RFCs), make - * sure that you also update all code which refers to it. - */ -#define DCCP_OPTVAL_MAXLEN 6 - -extern void dccp_encode_value_var(const u64 value, u8 *to, const u8 len); -extern u64 dccp_decode_value_var(const u8 *bf, const u8 len); - -extern int dccp_insert_option_mandatory(struct sk_buff *skb); -extern int dccp_insert_fn_opt(struct sk_buff *skb, u8 type, u8 feat, - u8 *val, u8 len, bool repeat_first); #endif /* _DCCP_FEAT_H */ diff --git a/net/dccp/input.c b/net/dccp/input.c index df0e6714aa1..779d0ed9ae9 100644 --- a/net/dccp/input.c +++ b/net/dccp/input.c @@ -159,15 +159,13 @@ static void dccp_rcv_reset(struct sock *sk, struct sk_buff *skb) dccp_time_wait(sk, DCCP_TIME_WAIT, 0); } -static void dccp_handle_ackvec_processing(struct sock *sk, struct sk_buff *skb) +static void dccp_event_ack_recv(struct sock *sk, struct sk_buff *skb) { - struct dccp_ackvec *av = dccp_sk(sk)->dccps_hc_rx_ackvec; + struct dccp_sock *dp = dccp_sk(sk); - if (av == NULL) - return; - if (DCCP_SKB_CB(skb)->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ) - dccp_ackvec_clear_state(av, DCCP_SKB_CB(skb)->dccpd_ack_seq); - dccp_ackvec_input(av, skb); + if (dccp_msk(sk)->dccpms_send_ack_vector) + dccp_ackvec_check_rcv_ackno(dp->dccps_hc_rx_ackvec, sk, + DCCP_SKB_CB(skb)->dccpd_ack_seq); } static void dccp_deliver_input_to_ccids(struct sock *sk, struct sk_buff *skb) @@ -366,13 +364,22 @@ discard: int dccp_rcv_established(struct sock *sk, struct sk_buff *skb, const struct dccp_hdr *dh, const unsigned len) { + struct dccp_sock *dp = dccp_sk(sk); + if (dccp_check_seqno(sk, skb)) goto discard; if (dccp_parse_options(sk, NULL, skb)) return 1; - dccp_handle_ackvec_processing(sk, skb); + if (DCCP_SKB_CB(skb)->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ) + dccp_event_ack_recv(sk, skb); + + if (dccp_msk(sk)->dccpms_send_ack_vector && + dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk, + DCCP_SKB_CB(skb)->dccpd_seq, + DCCP_ACKVEC_STATE_RECEIVED)) + goto discard; dccp_deliver_input_to_ccids(sk, skb); return __dccp_rcv_established(sk, skb, dh, len); @@ -414,33 +421,40 @@ static int dccp_rcv_request_sent_state_process(struct sock *sk, goto out_invalid_packet; } - /* - * If option processing (Step 8) failed, return 1 here so that - * dccp_v4_do_rcv() sends a Reset. The Reset code depends on - * the option type and is set in dccp_parse_options(). - */ if (dccp_parse_options(sk, NULL, skb)) - return 1; + goto out_invalid_packet; /* Obtain usec RTT sample from SYN exchange (used by CCID 3) */ if (likely(dp->dccps_options_received.dccpor_timestamp_echo)) dp->dccps_syn_rtt = dccp_sample_rtt(sk, 10 * (tstamp - dp->dccps_options_received.dccpor_timestamp_echo)); + if (dccp_msk(sk)->dccpms_send_ack_vector && + dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk, + DCCP_SKB_CB(skb)->dccpd_seq, + DCCP_ACKVEC_STATE_RECEIVED)) + goto out_invalid_packet; /* FIXME: change error code */ + /* Stop the REQUEST timer */ inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS); WARN_ON(sk->sk_send_head == NULL); kfree_skb(sk->sk_send_head); sk->sk_send_head = NULL; + dp->dccps_isr = DCCP_SKB_CB(skb)->dccpd_seq; + dccp_update_gsr(sk, dp->dccps_isr); /* - * Set ISR, GSR from packet. ISS was set in dccp_v{4,6}_connect - * and GSS in dccp_transmit_skb(). Setting AWL/AWH and SWL/SWH - * is done as part of activating the feature values below, since - * these settings depend on the local/remote Sequence Window - * features, which were undefined or not confirmed until now. + * SWL and AWL are initially adjusted so that they are not less than + * the initial Sequence Numbers received and sent, respectively: + * SWL := max(GSR + 1 - floor(W/4), ISR), + * AWL := max(GSS - W' + 1, ISS). + * These adjustments MUST be applied only at the beginning of the + * connection. + * + * AWL was adjusted in dccp_v4_connect -acme */ - dp->dccps_gsr = dp->dccps_isr = DCCP_SKB_CB(skb)->dccpd_seq; + dccp_set_seqno(&dp->dccps_swl, + max48(dp->dccps_swl, dp->dccps_isr)); dccp_sync_mss(sk, icsk->icsk_pmtu_cookie); @@ -461,15 +475,6 @@ static int dccp_rcv_request_sent_state_process(struct sock *sk, */ dccp_set_state(sk, DCCP_PARTOPEN); - /* - * If feature negotiation was successful, activate features now; - * an activation failure means that this host could not activate - * one ore more features (e.g. insufficient memory), which would - * leave at least one feature in an undefined state. - */ - if (dccp_feat_activate_values(sk, &dp->dccps_featneg)) - goto unable_to_proceed; - /* Make sure socket is routed, for correct metrics. */ icsk->icsk_af_ops->rebuild_header(sk); @@ -504,16 +509,6 @@ out_invalid_packet: /* dccp_v4_do_rcv will send a reset */ DCCP_SKB_CB(skb)->dccpd_reset_code = DCCP_RESET_CODE_PACKET_ERROR; return 1; - -unable_to_proceed: - DCCP_SKB_CB(skb)->dccpd_reset_code = DCCP_RESET_CODE_ABORTED; - /* - * We mark this socket as no longer usable, so that the loop in - * dccp_sendmsg() terminates and the application gets notified. - */ - dccp_set_state(sk, DCCP_CLOSED); - sk->sk_err = ECOMM; - return 1; } static int dccp_rcv_respond_partopen_state_process(struct sock *sk, @@ -595,6 +590,8 @@ int dccp_rcv_state_process(struct sock *sk, struct sk_buff *skb, if (inet_csk(sk)->icsk_af_ops->conn_request(sk, skb) < 0) return 1; + + /* FIXME: do congestion control initialization */ goto discard; } if (dh->dccph_type == DCCP_PKT_RESET) @@ -603,35 +600,29 @@ int dccp_rcv_state_process(struct sock *sk, struct sk_buff *skb, /* Caller (dccp_v4_do_rcv) will send Reset */ dcb->dccpd_reset_code = DCCP_RESET_CODE_NO_CONNECTION; return 1; - } else if (sk->sk_state == DCCP_CLOSED) { - dcb->dccpd_reset_code = DCCP_RESET_CODE_NO_CONNECTION; - return 1; } - /* Step 6: Check sequence numbers (omitted in LISTEN/REQUEST state) */ - if (sk->sk_state != DCCP_REQUESTING && dccp_check_seqno(sk, skb)) - goto discard; + if (sk->sk_state != DCCP_REQUESTING) { + if (dccp_check_seqno(sk, skb)) + goto discard; - /* - * Step 7: Check for unexpected packet types - * If (S.is_server and P.type == Response) - * or (S.is_client and P.type == Request) - * or (S.state == RESPOND and P.type == Data), - * Send Sync packet acknowledging P.seqno - * Drop packet and return - */ - if ((dp->dccps_role != DCCP_ROLE_CLIENT && - dh->dccph_type == DCCP_PKT_RESPONSE) || - (dp->dccps_role == DCCP_ROLE_CLIENT && - dh->dccph_type == DCCP_PKT_REQUEST) || - (sk->sk_state == DCCP_RESPOND && dh->dccph_type == DCCP_PKT_DATA)) { - dccp_send_sync(sk, dcb->dccpd_seq, DCCP_PKT_SYNC); - goto discard; - } + /* + * Step 8: Process options and mark acknowledgeable + */ + if (dccp_parse_options(sk, NULL, skb)) + return 1; - /* Step 8: Process options */ - if (dccp_parse_options(sk, NULL, skb)) - return 1; + if (dcb->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ) + dccp_event_ack_recv(sk, skb); + + if (dccp_msk(sk)->dccpms_send_ack_vector && + dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk, + DCCP_SKB_CB(skb)->dccpd_seq, + DCCP_ACKVEC_STATE_RECEIVED)) + goto discard; + + dccp_deliver_input_to_ccids(sk, skb); + } /* * Step 9: Process Reset @@ -640,22 +631,44 @@ int dccp_rcv_state_process(struct sock *sk, struct sk_buff *skb, * S.state := TIMEWAIT * Set TIMEWAIT timer * Drop packet and return - */ + */ if (dh->dccph_type == DCCP_PKT_RESET) { dccp_rcv_reset(sk, skb); return 0; - } else if (dh->dccph_type == DCCP_PKT_CLOSEREQ) { /* Step 13 */ + /* + * Step 7: Check for unexpected packet types + * If (S.is_server and P.type == Response) + * or (S.is_client and P.type == Request) + * or (S.state == RESPOND and P.type == Data), + * Send Sync packet acknowledging P.seqno + * Drop packet and return + */ + } else if ((dp->dccps_role != DCCP_ROLE_CLIENT && + dh->dccph_type == DCCP_PKT_RESPONSE) || + (dp->dccps_role == DCCP_ROLE_CLIENT && + dh->dccph_type == DCCP_PKT_REQUEST) || + (sk->sk_state == DCCP_RESPOND && + dh->dccph_type == DCCP_PKT_DATA)) { + dccp_send_sync(sk, dcb->dccpd_seq, DCCP_PKT_SYNC); + goto discard; + } else if (dh->dccph_type == DCCP_PKT_CLOSEREQ) { if (dccp_rcv_closereq(sk, skb)) return 0; goto discard; - } else if (dh->dccph_type == DCCP_PKT_CLOSE) { /* Step 14 */ + } else if (dh->dccph_type == DCCP_PKT_CLOSE) { if (dccp_rcv_close(sk, skb)) return 0; goto discard; } switch (sk->sk_state) { + case DCCP_CLOSED: + dcb->dccpd_reset_code = DCCP_RESET_CODE_NO_CONNECTION; + return 1; + case DCCP_REQUESTING: + /* FIXME: do congestion control initialization */ + queued = dccp_rcv_request_sent_state_process(sk, skb, dh, len); if (queued >= 0) return queued; @@ -663,12 +676,8 @@ int dccp_rcv_state_process(struct sock *sk, struct sk_buff *skb, __kfree_skb(skb); return 0; - case DCCP_PARTOPEN: - /* Step 8: if using Ack Vectors, mark packet acknowledgeable */ - dccp_handle_ackvec_processing(sk, skb); - dccp_deliver_input_to_ccids(sk, skb); - /* fall through */ case DCCP_RESPOND: + case DCCP_PARTOPEN: queued = dccp_rcv_respond_partopen_state_process(sk, skb, dh, len); break; @@ -707,7 +716,16 @@ u32 dccp_sample_rtt(struct sock *sk, long delta) /* dccpor_elapsed_time is either zeroed out or set and > 0 */ delta -= dccp_sk(sk)->dccps_options_received.dccpor_elapsed_time * 10; - return dccp_sane_rtt(delta); + if (unlikely(delta <= 0)) { + DCCP_WARN("unusable RTT sample %ld, using min\n", delta); + return DCCP_SANE_RTT_MIN; + } + if (unlikely(delta > DCCP_SANE_RTT_MAX)) { + DCCP_WARN("RTT sample %ld too large, using max\n", delta); + return DCCP_SANE_RTT_MAX; + } + + return delta; } EXPORT_SYMBOL_GPL(dccp_sample_rtt); diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index b623f6b2548..882c5c4de69 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -545,7 +545,6 @@ out: static void dccp_v4_reqsk_destructor(struct request_sock *req) { - dccp_feat_list_purge(&dccp_rsk(req)->dreq_featneg); kfree(inet_rsk(req)->opt); } @@ -596,8 +595,7 @@ int dccp_v4_conn_request(struct sock *sk, struct sk_buff *skb) if (req == NULL) goto drop; - if (dccp_reqsk_init(req, dccp_sk(sk), skb)) - goto drop_and_free; + dccp_reqsk_init(req, skb); dreq = dccp_rsk(req); if (dccp_parse_options(sk, dreq, skb)) diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index ad6212e0043..5e1ee0da2c4 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -302,7 +302,6 @@ done: static void dccp_v6_reqsk_destructor(struct request_sock *req) { - dccp_feat_list_purge(&dccp_rsk(req)->dreq_featneg); if (inet6_rsk(req)->pktopts != NULL) kfree_skb(inet6_rsk(req)->pktopts); } @@ -425,8 +424,7 @@ static int dccp_v6_conn_request(struct sock *sk, struct sk_buff *skb) if (req == NULL) goto drop; - if (dccp_reqsk_init(req, dccp_sk(sk), skb)) - goto drop_and_free; + dccp_reqsk_init(req, skb); dreq = dccp_rsk(req); if (dccp_parse_options(sk, dreq, skb)) diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index f4d9c8f60ed..b2804e2d1b8 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -42,6 +42,16 @@ struct inet_timewait_death_row dccp_death_row = { EXPORT_SYMBOL_GPL(dccp_death_row); +void dccp_minisock_init(struct dccp_minisock *dmsk) +{ + dmsk->dccpms_sequence_window = sysctl_dccp_feat_sequence_window; + dmsk->dccpms_rx_ccid = sysctl_dccp_feat_rx_ccid; + dmsk->dccpms_tx_ccid = sysctl_dccp_feat_tx_ccid; + dmsk->dccpms_ack_ratio = sysctl_dccp_feat_ack_ratio; + dmsk->dccpms_send_ack_vector = sysctl_dccp_feat_send_ack_vector; + dmsk->dccpms_send_ndp_count = sysctl_dccp_feat_send_ndp_count; +} + void dccp_time_wait(struct sock *sk, int state, int timeo) { struct inet_timewait_sock *tw = NULL; @@ -102,9 +112,10 @@ struct sock *dccp_create_openreq_child(struct sock *sk, struct sock *newsk = inet_csk_clone(sk, req, GFP_ATOMIC); if (newsk != NULL) { - struct dccp_request_sock *dreq = dccp_rsk(req); + const struct dccp_request_sock *dreq = dccp_rsk(req); struct inet_connection_sock *newicsk = inet_csk(newsk); struct dccp_sock *newdp = dccp_sk(newsk); + struct dccp_minisock *newdmsk = dccp_msk(newsk); newdp->dccps_role = DCCP_ROLE_SERVER; newdp->dccps_hc_rx_ackvec = NULL; @@ -114,32 +125,65 @@ struct sock *dccp_create_openreq_child(struct sock *sk, newdp->dccps_timestamp_time = dreq->dreq_timestamp_time; newicsk->icsk_rto = DCCP_TIMEOUT_INIT; - INIT_LIST_HEAD(&newdp->dccps_featneg); + if (dccp_feat_clone(sk, newsk)) + goto out_free; + + if (newdmsk->dccpms_send_ack_vector) { + newdp->dccps_hc_rx_ackvec = + dccp_ackvec_alloc(GFP_ATOMIC); + if (unlikely(newdp->dccps_hc_rx_ackvec == NULL)) + goto out_free; + } + + newdp->dccps_hc_rx_ccid = + ccid_hc_rx_new(newdmsk->dccpms_rx_ccid, + newsk, GFP_ATOMIC); + newdp->dccps_hc_tx_ccid = + ccid_hc_tx_new(newdmsk->dccpms_tx_ccid, + newsk, GFP_ATOMIC); + if (unlikely(newdp->dccps_hc_rx_ccid == NULL || + newdp->dccps_hc_tx_ccid == NULL)) { + dccp_ackvec_free(newdp->dccps_hc_rx_ackvec); + ccid_hc_rx_delete(newdp->dccps_hc_rx_ccid, newsk); + ccid_hc_tx_delete(newdp->dccps_hc_tx_ccid, newsk); +out_free: + /* It is still raw copy of parent, so invalidate + * destructor and make plain sk_free() */ + newsk->sk_destruct = NULL; + sk_free(newsk); + return NULL; + } + /* * Step 3: Process LISTEN state * * Choose S.ISS (initial seqno) or set from Init Cookies * Initialize S.GAR := S.ISS - * Set S.ISR, S.GSR from packet (or Init Cookies) - * - * Setting AWL/AWH and SWL/SWH happens as part of the feature - * activation below, as these windows all depend on the local - * and remote Sequence Window feature values (7.5.2). + * Set S.ISR, S.GSR, S.SWL, S.SWH from packet or Init Cookies */ - newdp->dccps_gss = newdp->dccps_iss = dreq->dreq_iss; - newdp->dccps_gar = newdp->dccps_iss; - newdp->dccps_gsr = newdp->dccps_isr = dreq->dreq_isr; + + /* See dccp_v4_conn_request */ + newdmsk->dccpms_sequence_window = req->rcv_wnd; + + newdp->dccps_gar = newdp->dccps_iss = dreq->dreq_iss; + dccp_update_gss(newsk, dreq->dreq_iss); + + newdp->dccps_isr = dreq->dreq_isr; + dccp_update_gsr(newsk, dreq->dreq_isr); /* - * Activate features: initialise CCIDs, sequence windows etc. + * SWL and AWL are initially adjusted so that they are not less than + * the initial Sequence Numbers received and sent, respectively: + * SWL := max(GSR + 1 - floor(W/4), ISR), + * AWL := max(GSS - W' + 1, ISS). + * These adjustments MUST be applied only at the beginning of the + * connection. */ - if (dccp_feat_activate_values(newsk, &dreq->dreq_featneg)) { - /* It is still raw copy of parent, so invalidate - * destructor and make plain sk_free() */ - newsk->sk_destruct = NULL; - sk_free(newsk); - return NULL; - } + dccp_set_seqno(&newdp->dccps_swl, + max48(newdp->dccps_swl, newdp->dccps_isr)); + dccp_set_seqno(&newdp->dccps_awl, + max48(newdp->dccps_awl, newdp->dccps_iss)); + dccp_init_xmit_timers(newsk); DCCP_INC_STATS_BH(DCCP_MIB_PASSIVEOPENS); @@ -260,17 +304,14 @@ void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, EXPORT_SYMBOL_GPL(dccp_reqsk_send_ack); -int dccp_reqsk_init(struct request_sock *req, - struct dccp_sock const *dp, struct sk_buff const *skb) +void dccp_reqsk_init(struct request_sock *req, struct sk_buff *skb) { struct dccp_request_sock *dreq = dccp_rsk(req); inet_rsk(req)->rmt_port = dccp_hdr(skb)->dccph_sport; inet_rsk(req)->acked = 0; + req->rcv_wnd = sysctl_dccp_feat_sequence_window; dreq->dreq_timestamp_echo = 0; - - /* inherit feature negotiation options from listening socket */ - return dccp_feat_clone_list(&dp->dccps_featneg, &dreq->dreq_featneg); } EXPORT_SYMBOL_GPL(dccp_reqsk_init); diff --git a/net/dccp/options.c b/net/dccp/options.c index e5a32979d7d..0809b63cb05 100644 --- a/net/dccp/options.c +++ b/net/dccp/options.c @@ -23,20 +23,23 @@ #include "dccp.h" #include "feat.h" -u64 dccp_decode_value_var(const u8 *bf, const u8 len) +int sysctl_dccp_feat_sequence_window = DCCPF_INITIAL_SEQUENCE_WINDOW; +int sysctl_dccp_feat_rx_ccid = DCCPF_INITIAL_CCID; +int sysctl_dccp_feat_tx_ccid = DCCPF_INITIAL_CCID; +int sysctl_dccp_feat_ack_ratio = DCCPF_INITIAL_ACK_RATIO; +int sysctl_dccp_feat_send_ack_vector = DCCPF_INITIAL_SEND_ACK_VECTOR; +int sysctl_dccp_feat_send_ndp_count = DCCPF_INITIAL_SEND_NDP_COUNT; + +static u32 dccp_decode_value_var(const unsigned char *bf, const u8 len) { - u64 value = 0; + u32 value = 0; - if (len >= DCCP_OPTVAL_MAXLEN) - value += ((u64)*bf++) << 40; - if (len > 4) - value += ((u64)*bf++) << 32; if (len > 3) - value += ((u64)*bf++) << 24; + value += *bf++ << 24; if (len > 2) - value += ((u64)*bf++) << 16; + value += *bf++ << 16; if (len > 1) - value += ((u64)*bf++) << 8; + value += *bf++ << 8; if (len > 0) value += *bf; @@ -54,6 +57,7 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq, struct dccp_sock *dp = dccp_sk(sk); const struct dccp_hdr *dh = dccp_hdr(skb); const u8 pkt_type = DCCP_SKB_CB(skb)->dccpd_type; + u64 ackno = DCCP_SKB_CB(skb)->dccpd_ack_seq; unsigned char *options = (unsigned char *)dh + dccp_hdr_len(skb); unsigned char *opt_ptr = options; const unsigned char *opt_end = (unsigned char *)dh + @@ -95,11 +99,18 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq, } /* + * CCID-Specific Options (from RFC 4340, sec. 10.3): + * + * Option numbers 128 through 191 are for options sent from the + * HC-Sender to the HC-Receiver; option numbers 192 through 255 + * are for options sent from the HC-Receiver to the HC-Sender. + * * CCID-specific options are ignored during connection setup, as * negotiation may still be in progress (see RFC 4340, 10.3). * The same applies to Ack Vectors, as these depend on the CCID. + * */ - if (dreq != NULL && (opt >= DCCPO_MIN_RX_CCID_SPECIFIC || + if (dreq != NULL && (opt >= 128 || opt == DCCPO_ACK_VECTOR_0 || opt == DCCPO_ACK_VECTOR_1)) goto ignore_option; @@ -120,13 +131,43 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq, dccp_pr_debug("%s opt: NDP count=%llu\n", dccp_role(sk), (unsigned long long)opt_recv->dccpor_ndp); break; - case DCCPO_CHANGE_L ... DCCPO_CONFIRM_R: - if (pkt_type == DCCP_PKT_DATA) /* RFC 4340, 6 */ + case DCCPO_CHANGE_L: + /* fall through */ + case DCCPO_CHANGE_R: + if (pkt_type == DCCP_PKT_DATA) break; - rc = dccp_feat_parse_options(sk, dreq, mandatory, opt, - *value, value + 1, len - 1); - if (rc) - goto out_featneg_failed; + if (len < 2) + goto out_invalid_option; + rc = dccp_feat_change_recv(sk, opt, *value, value + 1, + len - 1); + /* + * When there is a change error, change_recv is + * responsible for dealing with it. i.e. reply with an + * empty confirm. + * If the change was mandatory, then we need to die. + */ + if (rc && mandatory) + goto out_invalid_option; + break; + case DCCPO_CONFIRM_L: + /* fall through */ + case DCCPO_CONFIRM_R: + if (pkt_type == DCCP_PKT_DATA) + break; + if (len < 2) /* FIXME this disallows empty confirm */ + goto out_invalid_option; + if (dccp_feat_confirm_recv(sk, opt, *value, + value + 1, len - 1)) + goto out_invalid_option; + break; + case DCCPO_ACK_VECTOR_0: + case DCCPO_ACK_VECTOR_1: + if (dccp_packet_without_ack(skb)) /* RFC 4340, 11.4 */ + break; + + if (dccp_msk(sk)->dccpms_send_ack_vector && + dccp_ackvec_parse(sk, skb, &ackno, opt, value, len)) + goto out_invalid_option; break; case DCCPO_TIMESTAMP: if (len != 4) @@ -154,8 +195,6 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq, dccp_role(sk), ntohl(opt_val), (unsigned long long) DCCP_SKB_CB(skb)->dccpd_ack_seq); - /* schedule an Ack in case this sender is quiescent */ - inet_csk_schedule_ack(sk); break; case DCCPO_TIMESTAMP_ECHO: if (len != 4 && len != 6 && len != 8) @@ -212,25 +251,23 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq, dccp_pr_debug("%s rx opt: ELAPSED_TIME=%d\n", dccp_role(sk), elapsed_time); break; - case DCCPO_MIN_RX_CCID_SPECIFIC ... DCCPO_MAX_RX_CCID_SPECIFIC: + case 128 ... 191: { + const u16 idx = value - options; + if (ccid_hc_rx_parse_options(dp->dccps_hc_rx_ccid, sk, - pkt_type, opt, value, len)) + opt, len, idx, + value) != 0) goto out_invalid_option; + } break; - case DCCPO_ACK_VECTOR_0: - case DCCPO_ACK_VECTOR_1: - if (dccp_packet_without_ack(skb)) /* RFC 4340, 11.4 */ - break; - /* - * Ack vectors are processed by the TX CCID if it is - * interested. The RX CCID need not parse Ack Vectors, - * since it is only interested in clearing old state. - * Fall through. - */ - case DCCPO_MIN_TX_CCID_SPECIFIC ... DCCPO_MAX_TX_CCID_SPECIFIC: + case 192 ... 255: { + const u16 idx = value - options; + if (ccid_hc_tx_parse_options(dp->dccps_hc_tx_ccid, sk, - pkt_type, opt, value, len)) + opt, len, idx, + value) != 0) goto out_invalid_option; + } break; default: DCCP_CRIT("DCCP(%p): option %d(len=%d) not " @@ -252,10 +289,8 @@ out_nonsensical_length: out_invalid_option: DCCP_INC_STATS_BH(DCCP_MIB_INVALIDOPT); - rc = DCCP_RESET_CODE_OPTION_ERROR; -out_featneg_failed: - DCCP_WARN("DCCP(%p): Option %d (len=%d) error=%u\n", sk, opt, len, rc); - DCCP_SKB_CB(skb)->dccpd_reset_code = rc; + DCCP_SKB_CB(skb)->dccpd_reset_code = DCCP_RESET_CODE_OPTION_ERROR; + DCCP_WARN("DCCP(%p): invalid option %d, len=%d", sk, opt, len); DCCP_SKB_CB(skb)->dccpd_reset_data[0] = opt; DCCP_SKB_CB(skb)->dccpd_reset_data[1] = len > 0 ? value[0] : 0; DCCP_SKB_CB(skb)->dccpd_reset_data[2] = len > 1 ? value[1] : 0; @@ -264,12 +299,9 @@ out_featneg_failed: EXPORT_SYMBOL_GPL(dccp_parse_options); -void dccp_encode_value_var(const u64 value, u8 *to, const u8 len) +static void dccp_encode_value_var(const u32 value, unsigned char *to, + const unsigned int len) { - if (len >= DCCP_OPTVAL_MAXLEN) - *to++ = (value & 0xFF0000000000ull) >> 40; - if (len > 4) - *to++ = (value & 0xFF00000000ull) >> 32; if (len > 3) *to++ = (value & 0xFF000000) >> 24; if (len > 2) @@ -429,140 +461,92 @@ static int dccp_insert_option_timestamp_echo(struct dccp_sock *dp, return 0; } -static int dccp_insert_option_ackvec(struct sock *sk, struct sk_buff *skb) +static int dccp_insert_feat_opt(struct sk_buff *skb, u8 type, u8 feat, + u8 *val, u8 len) { - struct dccp_sock *dp = dccp_sk(sk); - struct dccp_ackvec *av = dp->dccps_hc_rx_ackvec; - struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb); - const u16 buflen = dccp_ackvec_buflen(av); - /* Figure out how many options do we need to represent the ackvec */ - const u8 nr_opts = DIV_ROUND_UP(buflen, DCCP_SINGLE_OPT_MAXLEN); - u16 len = buflen + 2 * nr_opts; - u8 i, nonce = 0; - const unsigned char *tail, *from; - unsigned char *to; + u8 *to; - if (dcb->dccpd_opt_len + len > DCCP_MAX_OPT_LEN) { - DCCP_WARN("Lacking space for %u bytes on %s packet\n", len, - dccp_packet_name(dcb->dccpd_type)); + if (DCCP_SKB_CB(skb)->dccpd_opt_len + len + 3 > DCCP_MAX_OPT_LEN) { + DCCP_WARN("packet too small for feature %d option!\n", feat); return -1; } - /* - * Since Ack Vectors are variable-length, we can not always predict - * their size. To catch exception cases where the space is running out - * on the skb, a separate Sync is scheduled to carry the Ack Vector. - */ - if (len > DCCPAV_MIN_OPTLEN && - len + dcb->dccpd_opt_len + skb->len > dp->dccps_mss_cache) { - DCCP_WARN("No space left for Ack Vector (%u) on skb (%u+%u), " - "MPS=%u ==> reduce payload size?\n", len, skb->len, - dcb->dccpd_opt_len, dp->dccps_mss_cache); - dp->dccps_sync_scheduled = 1; - return 0; - } - dcb->dccpd_opt_len += len; - to = skb_push(skb, len); - len = buflen; - from = av->av_buf + av->av_buf_head; - tail = av->av_buf + DCCPAV_MAX_ACKVEC_LEN; + DCCP_SKB_CB(skb)->dccpd_opt_len += len + 3; - for (i = 0; i < nr_opts; ++i) { - int copylen = len; - - if (len > DCCP_SINGLE_OPT_MAXLEN) - copylen = DCCP_SINGLE_OPT_MAXLEN; - - /* - * RFC 4340, 12.2: Encode the Nonce Echo for this Ack Vector via - * its type; ack_nonce is the sum of all individual buf_nonce's. - */ - nonce ^= av->av_buf_nonce[i]; - - *to++ = DCCPO_ACK_VECTOR_0 + av->av_buf_nonce[i]; - *to++ = copylen + 2; - - /* Check if buf_head wraps */ - if (from + copylen > tail) { - const u16 tailsize = tail - from; - - memcpy(to, from, tailsize); - to += tailsize; - len -= tailsize; - copylen -= tailsize; - from = av->av_buf; - } - - memcpy(to, from, copylen); - from += copylen; - to += copylen; - len -= copylen; - } - /* - * Each sent Ack Vector is recorded in the list, as per A.2 of RFC 4340. - */ - if (dccp_ackvec_update_records(av, dcb->dccpd_seq, nonce)) - return -ENOBUFS; - return 0; -} + to = skb_push(skb, len + 3); + *to++ = type; + *to++ = len + 3; + *to++ = feat; -/** - * dccp_insert_option_mandatory - Mandatory option (5.8.2) - * Note that since we are using skb_push, this function needs to be called - * _after_ inserting the option it is supposed to influence (stack order). - */ -int dccp_insert_option_mandatory(struct sk_buff *skb) -{ - if (DCCP_SKB_CB(skb)->dccpd_opt_len >= DCCP_MAX_OPT_LEN) - return -1; + if (len) + memcpy(to, val, len); - DCCP_SKB_CB(skb)->dccpd_opt_len++; - *skb_push(skb, 1) = DCCPO_MANDATORY; + dccp_pr_debug("%s(%s (%d), ...), length %d\n", + dccp_feat_typename(type), + dccp_feat_name(feat), feat, len); return 0; } -/** - * dccp_insert_fn_opt - Insert single Feature-Negotiation option into @skb - * @type: %DCCPO_CHANGE_L, %DCCPO_CHANGE_R, %DCCPO_CONFIRM_L, %DCCPO_CONFIRM_R - * @feat: one out of %dccp_feature_numbers - * @val: NN value or SP array (preferred element first) to copy - * @len: true length of @val in bytes (excluding first element repetition) - * @repeat_first: whether to copy the first element of @val twice - * The last argument is used to construct Confirm options, where the preferred - * value and the preference list appear separately (RFC 4340, 6.3.1). Preference - * lists are kept such that the preferred entry is always first, so we only need - * to copy twice, and avoid the overhead of cloning into a bigger array. - */ -int dccp_insert_fn_opt(struct sk_buff *skb, u8 type, u8 feat, - u8 *val, u8 len, bool repeat_first) +static int dccp_insert_options_feat(struct sock *sk, struct sk_buff *skb) { - u8 tot_len, *to; + struct dccp_sock *dp = dccp_sk(sk); + struct dccp_minisock *dmsk = dccp_msk(sk); + struct dccp_opt_pend *opt, *next; + int change = 0; + + /* confirm any options [NN opts] */ + list_for_each_entry_safe(opt, next, &dmsk->dccpms_conf, dccpop_node) { + dccp_insert_feat_opt(skb, opt->dccpop_type, + opt->dccpop_feat, opt->dccpop_val, + opt->dccpop_len); + /* fear empty confirms */ + if (opt->dccpop_val) + kfree(opt->dccpop_val); + kfree(opt); + } + INIT_LIST_HEAD(&dmsk->dccpms_conf); + + /* see which features we need to send */ + list_for_each_entry(opt, &dmsk->dccpms_pending, dccpop_node) { + /* see if we need to send any confirm */ + if (opt->dccpop_sc) { + dccp_insert_feat_opt(skb, opt->dccpop_type + 1, + opt->dccpop_feat, + opt->dccpop_sc->dccpoc_val, + opt->dccpop_sc->dccpoc_len); + + BUG_ON(!opt->dccpop_sc->dccpoc_val); + kfree(opt->dccpop_sc->dccpoc_val); + kfree(opt->dccpop_sc); + opt->dccpop_sc = NULL; + } - /* take the `Feature' field and possible repetition into account */ - if (len > (DCCP_SINGLE_OPT_MAXLEN - 2)) { - DCCP_WARN("length %u for feature %u too large\n", len, feat); - return -1; + /* any option not confirmed, re-send it */ + if (!opt->dccpop_conf) { + dccp_insert_feat_opt(skb, opt->dccpop_type, + opt->dccpop_feat, opt->dccpop_val, + opt->dccpop_len); + change++; + } } - if (unlikely(val == NULL || len == 0)) - len = repeat_first = 0; - tot_len = 3 + repeat_first + len; + /* Retransmit timer. + * If this is the master listening sock, we don't set a timer on it. It + * should be fine because if the dude doesn't receive our RESPONSE + * [which will contain the CHANGE] he will send another REQUEST which + * will "retrnasmit" the change. + */ + if (change && dp->dccps_role != DCCP_ROLE_LISTEN) { + dccp_pr_debug("reset feat negotiation timer %p\n", sk); - if (DCCP_SKB_CB(skb)->dccpd_opt_len + tot_len > DCCP_MAX_OPT_LEN) { - DCCP_WARN("packet too small for feature %d option!\n", feat); - return -1; + /* XXX don't reset the timer on re-transmissions. I.e. reset it + * only when sending new stuff i guess. Currently the timer + * never backs off because on re-transmission it just resets it! + */ + inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, + inet_csk(sk)->icsk_rto, DCCP_RTO_MAX); } - DCCP_SKB_CB(skb)->dccpd_opt_len += tot_len; - - to = skb_push(skb, tot_len); - *to++ = type; - *to++ = tot_len; - *to++ = feat; - if (repeat_first) - *to++ = *val; - if (len) - memcpy(to, val, len); return 0; } @@ -581,30 +565,19 @@ static void dccp_insert_option_padding(struct sk_buff *skb) int dccp_insert_options(struct sock *sk, struct sk_buff *skb) { struct dccp_sock *dp = dccp_sk(sk); + struct dccp_minisock *dmsk = dccp_msk(sk); DCCP_SKB_CB(skb)->dccpd_opt_len = 0; - if (dp->dccps_send_ndp_count && dccp_insert_option_ndp(sk, skb)) + if (dmsk->dccpms_send_ndp_count && + dccp_insert_option_ndp(sk, skb)) return -1; - if (DCCP_SKB_CB(skb)->dccpd_type != DCCP_PKT_DATA) { - - /* Feature Negotiation */ - if (dccp_feat_insert_opts(dp, NULL, skb)) + if (!dccp_packet_without_ack(skb)) { + if (dmsk->dccpms_send_ack_vector && + dccp_ackvec_pending(dp->dccps_hc_rx_ackvec) && + dccp_insert_option_ackvec(sk, skb)) return -1; - - if (DCCP_SKB_CB(skb)->dccpd_type == DCCP_PKT_REQUEST) { - /* - * Obtain RTT sample from Request/Response exchange. - * This is currently used in CCID 3 initialisation. - */ - if (dccp_insert_option_timestamp(sk, skb)) - return -1; - - } else if (dccp_ackvec_pending(sk) && - dccp_insert_option_ackvec(sk, skb)) { - return -1; - } } if (dp->dccps_hc_rx_insert_options) { @@ -613,6 +586,21 @@ int dccp_insert_options(struct sock *sk, struct sk_buff *skb) dp->dccps_hc_rx_insert_options = 0; } + /* Feature negotiation */ + /* Data packets can't do feat negotiation */ + if (DCCP_SKB_CB(skb)->dccpd_type != DCCP_PKT_DATA && + DCCP_SKB_CB(skb)->dccpd_type != DCCP_PKT_DATAACK && + dccp_insert_options_feat(sk, skb)) + return -1; + + /* + * Obtain RTT sample from Request/Response exchange. + * This is currently used in CCID 3 initialisation. + */ + if (DCCP_SKB_CB(skb)->dccpd_type == DCCP_PKT_REQUEST && + dccp_insert_option_timestamp(sk, skb)) + return -1; + if (dp->dccps_timestamp_echo != 0 && dccp_insert_option_timestamp_echo(dp, NULL, skb)) return -1; @@ -625,9 +613,6 @@ int dccp_insert_options_rsk(struct dccp_request_sock *dreq, struct sk_buff *skb) { DCCP_SKB_CB(skb)->dccpd_opt_len = 0; - if (dccp_feat_insert_opts(NULL, dreq, skb)) - return -1; - if (dreq->dreq_timestamp_echo != 0 && dccp_insert_option_timestamp_echo(NULL, dreq, skb)) return -1; diff --git a/net/dccp/output.c b/net/dccp/output.c index 2532797a800..d06945c7d3d 100644 --- a/net/dccp/output.c +++ b/net/dccp/output.c @@ -26,13 +26,11 @@ static inline void dccp_event_ack_sent(struct sock *sk) inet_csk_clear_xmit_timer(sk, ICSK_TIME_DACK); } -/* enqueue @skb on sk_send_head for retransmission, return clone to send now */ -static struct sk_buff *dccp_skb_entail(struct sock *sk, struct sk_buff *skb) +static void dccp_skb_entail(struct sock *sk, struct sk_buff *skb) { skb_set_owner_w(skb, sk); WARN_ON(sk->sk_send_head); sk->sk_send_head = skb; - return skb_clone(sk->sk_send_head, gfp_any()); } /* @@ -163,27 +161,21 @@ unsigned int dccp_sync_mss(struct sock *sk, u32 pmtu) struct inet_connection_sock *icsk = inet_csk(sk); struct dccp_sock *dp = dccp_sk(sk); u32 ccmps = dccp_determine_ccmps(dp); - u32 cur_mps = ccmps ? min(pmtu, ccmps) : pmtu; + int cur_mps = ccmps ? min(pmtu, ccmps) : pmtu; /* Account for header lengths and IPv4/v6 option overhead */ cur_mps -= (icsk->icsk_af_ops->net_header_len + icsk->icsk_ext_hdr_len + sizeof(struct dccp_hdr) + sizeof(struct dccp_hdr_ext)); /* - * Leave enough headroom for common DCCP header options. - * This only considers options which may appear on DCCP-Data packets, as - * per table 3 in RFC 4340, 5.8. When running out of space for other - * options (eg. Ack Vector which can take up to 255 bytes), it is better - * to schedule a separate Ack. Thus we leave headroom for the following: - * - 1 byte for Slow Receiver (11.6) - * - 6 bytes for Timestamp (13.1) - * - 10 bytes for Timestamp Echo (13.3) - * - 8 bytes for NDP count (7.7, when activated) - * - 6 bytes for Data Checksum (9.3) - * - %DCCPAV_MIN_OPTLEN bytes for Ack Vector size (11.4, when enabled) + * FIXME: this should come from the CCID infrastructure, where, say, + * TFRC will say it wants TIMESTAMPS, ELAPSED time, etc, for now lets + * put a rough estimate for NDP + TIMESTAMP + TIMESTAMP_ECHO + ELAPSED + * TIME + TFRC_OPT_LOSS_EVENT_RATE + TFRC_OPT_RECEIVE_RATE + padding to + * make it a multiple of 4 */ - cur_mps -= roundup(1 + 6 + 10 + dp->dccps_send_ndp_count * 8 + 6 + - (dp->dccps_hc_rx_ackvec ? DCCPAV_MIN_OPTLEN : 0), 4); + + cur_mps -= ((5 + 6 + 10 + 6 + 6 + 6 + 3) / 4) * 4; /* And store cached results */ icsk->icsk_pmtu_cookie = pmtu; @@ -208,158 +200,95 @@ void dccp_write_space(struct sock *sk) } /** - * dccp_wait_for_ccid - Await CCID send permission + * dccp_wait_for_ccid - Wait for ccid to tell us we can send a packet * @sk: socket to wait for - * @delay: timeout in jiffies - * This is used by CCIDs which need to delay the send time in process context. + * @skb: current skb to pass on for waiting + * @delay: sleep timeout in milliseconds (> 0) + * This function is called by default when the socket is closed, and + * when a non-zero linger time is set on the socket. For consistency */ -static int dccp_wait_for_ccid(struct sock *sk, unsigned long delay) +static int dccp_wait_for_ccid(struct sock *sk, struct sk_buff *skb, int delay) { + struct dccp_sock *dp = dccp_sk(sk); DEFINE_WAIT(wait); - long remaining; - - prepare_to_wait(sk->sk_sleep, &wait, TASK_INTERRUPTIBLE); - sk->sk_write_pending++; - release_sock(sk); + unsigned long jiffdelay; + int rc; - remaining = schedule_timeout(delay); - - lock_sock(sk); - sk->sk_write_pending--; - finish_wait(sk->sk_sleep, &wait); + do { + dccp_pr_debug("delayed send by %d msec\n", delay); + jiffdelay = msecs_to_jiffies(delay); - if (signal_pending(current) || sk->sk_err) - return -1; - return remaining; -} - -/** - * dccp_xmit_packet - Send data packet under control of CCID - * Transmits next-queued payload and informs CCID to account for the packet. - */ -static void dccp_xmit_packet(struct sock *sk) -{ - int err, len; - struct dccp_sock *dp = dccp_sk(sk); - struct sk_buff *skb = dccp_qpolicy_pop(sk); + prepare_to_wait(sk->sk_sleep, &wait, TASK_INTERRUPTIBLE); - if (unlikely(skb == NULL)) - return; - len = skb->len; + sk->sk_write_pending++; + release_sock(sk); + schedule_timeout(jiffdelay); + lock_sock(sk); + sk->sk_write_pending--; - if (sk->sk_state == DCCP_PARTOPEN) { - const u32 cur_mps = dp->dccps_mss_cache - DCCP_FEATNEG_OVERHEAD; - /* - * See 8.1.5 - Handshake Completion. - * - * For robustness we resend Confirm options until the client has - * entered OPEN. During the initial feature negotiation, the MPS - * is smaller than usual, reduced by the Change/Confirm options. - */ - if (!list_empty(&dp->dccps_featneg) && len > cur_mps) { - DCCP_WARN("Payload too large (%d) for featneg.\n", len); - dccp_send_ack(sk); - dccp_feat_list_purge(&dp->dccps_featneg); - } + if (sk->sk_err) + goto do_error; + if (signal_pending(current)) + goto do_interrupted; - inet_csk_schedule_ack(sk); - inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, - inet_csk(sk)->icsk_rto, - DCCP_RTO_MAX); - DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_DATAACK; - } else if (dccp_ack_pending(sk)) { - DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_DATAACK; - } else { - DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_DATA; - } - - err = dccp_transmit_skb(sk, skb); - if (err) - dccp_pr_debug("transmit_skb() returned err=%d\n", err); - /* - * Register this one as sent even if an error occurred. To the remote - * end a local packet drop is indistinguishable from network loss, i.e. - * any local drop will eventually be reported via receiver feedback. - */ - ccid_hc_tx_packet_sent(dp->dccps_hc_tx_ccid, sk, len); - - /* - * If the CCID needs to transfer additional header options out-of-band - * (e.g. Ack Vectors or feature-negotiation options), it activates this - * flag to schedule a Sync. The Sync will automatically incorporate all - * currently pending header options, thus clearing the backlog. - */ - if (dp->dccps_sync_scheduled) - dccp_send_sync(sk, dp->dccps_gsr, DCCP_PKT_SYNC); + rc = ccid_hc_tx_send_packet(dp->dccps_hc_tx_ccid, sk, skb); + } while ((delay = rc) > 0); +out: + finish_wait(sk->sk_sleep, &wait); + return rc; + +do_error: + rc = -EPIPE; + goto out; +do_interrupted: + rc = -EINTR; + goto out; } -/** - * dccp_flush_write_queue - Drain queue at end of connection - * Since dccp_sendmsg queues packets without waiting for them to be sent, it may - * happen that the TX queue is not empty at the end of a connection. We give the - * HC-sender CCID a grace period of up to @time_budget jiffies. If this function - * returns with a non-empty write queue, it will be purged later. - */ -void dccp_flush_write_queue(struct sock *sk, long *time_budget) +void dccp_write_xmit(struct sock *sk, int block) { struct dccp_sock *dp = dccp_sk(sk); struct sk_buff *skb; - long delay, rc; - - while (*time_budget > 0 && (skb = skb_peek(&sk->sk_write_queue))) { - rc = ccid_hc_tx_send_packet(dp->dccps_hc_tx_ccid, sk, skb); - switch (ccid_packet_dequeue_eval(rc)) { - case CCID_PACKET_WILL_DEQUEUE_LATER: - /* - * If the CCID determines when to send, the next sending - * time is unknown or the CCID may not even send again - * (e.g. remote host crashes or lost Ack packets). - */ - DCCP_WARN("CCID did not manage to send all packets\n"); - return; - case CCID_PACKET_DELAY: - delay = msecs_to_jiffies(rc); - if (delay > *time_budget) - return; - rc = dccp_wait_for_ccid(sk, delay); - if (rc < 0) - return; - *time_budget -= (delay - rc); - /* check again if we can send now */ - break; - case CCID_PACKET_SEND_AT_ONCE: - dccp_xmit_packet(sk); - break; - case CCID_PACKET_ERR: - skb_dequeue(&sk->sk_write_queue); - kfree_skb(skb); - dccp_pr_debug("packet discarded due to err=%ld\n", rc); + while ((skb = skb_peek(&sk->sk_write_queue))) { + int err = ccid_hc_tx_send_packet(dp->dccps_hc_tx_ccid, sk, skb); + + if (err > 0) { + if (!block) { + sk_reset_timer(sk, &dp->dccps_xmit_timer, + msecs_to_jiffies(err)+jiffies); + break; + } else + err = dccp_wait_for_ccid(sk, skb, err); + if (err && err != -EINTR) + DCCP_BUG("err=%d after dccp_wait_for_ccid", err); } - } -} -void dccp_write_xmit(struct sock *sk) -{ - struct dccp_sock *dp = dccp_sk(sk); - struct sk_buff *skb; + skb_dequeue(&sk->sk_write_queue); + if (err == 0) { + struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb); + const int len = skb->len; - while ((skb = dccp_qpolicy_top(sk))) { - int rc = ccid_hc_tx_send_packet(dp->dccps_hc_tx_ccid, sk, skb); - - switch (ccid_packet_dequeue_eval(rc)) { - case CCID_PACKET_WILL_DEQUEUE_LATER: - return; - case CCID_PACKET_DELAY: - sk_reset_timer(sk, &dp->dccps_xmit_timer, - jiffies + msecs_to_jiffies(rc)); - return; - case CCID_PACKET_SEND_AT_ONCE: - dccp_xmit_packet(sk); - break; - case CCID_PACKET_ERR: - dccp_qpolicy_drop(sk, skb); - dccp_pr_debug("packet discarded due to err=%d\n", rc); + if (sk->sk_state == DCCP_PARTOPEN) { + /* See 8.1.5. Handshake Completion */ + inet_csk_schedule_ack(sk); + inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, + inet_csk(sk)->icsk_rto, + DCCP_RTO_MAX); + dcb->dccpd_type = DCCP_PKT_DATAACK; + } else if (dccp_ack_pending(sk)) + dcb->dccpd_type = DCCP_PKT_DATAACK; + else + dcb->dccpd_type = DCCP_PKT_DATA; + + err = dccp_transmit_skb(sk, skb); + ccid_hc_tx_packet_sent(dp->dccps_hc_tx_ccid, sk, 0, len); + if (err) + DCCP_BUG("err=%d after ccid_hc_tx_packet_sent", + err); + } else { + dccp_pr_debug("packet discarded due to err=%d\n", err); + kfree_skb(skb); } } } @@ -410,12 +339,10 @@ struct sk_buff *dccp_make_response(struct sock *sk, struct dst_entry *dst, DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_RESPONSE; DCCP_SKB_CB(skb)->dccpd_seq = dreq->dreq_iss; - /* Resolve feature dependencies resulting from choice of CCID */ - if (dccp_feat_server_ccid_dependencies(dreq)) - goto response_failed; - - if (dccp_insert_options_rsk(dreq, skb)) - goto response_failed; + if (dccp_insert_options_rsk(dreq, skb)) { + kfree_skb(skb); + return NULL; + } /* Build and checksum header */ dh = dccp_zeroed_hdr(skb, dccp_header_size); @@ -436,9 +363,6 @@ struct sk_buff *dccp_make_response(struct sock *sk, struct dst_entry *dst, inet_rsk(req)->acked = 1; DCCP_INC_STATS(DCCP_MIB_OUTSEGS); return skb; -response_failed: - kfree_skb(skb); - return NULL; } EXPORT_SYMBOL_GPL(dccp_make_response); @@ -523,9 +447,8 @@ int dccp_send_reset(struct sock *sk, enum dccp_reset_codes code) /* * Do all connect socket setups that can be done AF independent. */ -int dccp_connect(struct sock *sk) +static inline void dccp_connect_init(struct sock *sk) { - struct sk_buff *skb; struct dccp_sock *dp = dccp_sk(sk); struct dst_entry *dst = __sk_dst_get(sk); struct inet_connection_sock *icsk = inet_csk(sk); @@ -535,13 +458,19 @@ int dccp_connect(struct sock *sk) dccp_sync_mss(sk, dst_mtu(dst)); - /* do not connect if feature negotiation setup fails */ - if (dccp_feat_finalise_settings(dccp_sk(sk))) - return -EPROTO; - /* Initialise GAR as per 8.5; AWL/AWH are set in dccp_transmit_skb() */ dp->dccps_gar = dp->dccps_iss; + icsk->icsk_retransmits = 0; +} + +int dccp_connect(struct sock *sk) +{ + struct sk_buff *skb; + struct inet_connection_sock *icsk = inet_csk(sk); + + dccp_connect_init(sk); + skb = alloc_skb(sk->sk_prot->max_header, sk->sk_allocation); if (unlikely(skb == NULL)) return -ENOBUFS; @@ -551,11 +480,11 @@ int dccp_connect(struct sock *sk) DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_REQUEST; - dccp_transmit_skb(sk, dccp_skb_entail(sk, skb)); + dccp_skb_entail(sk, skb); + dccp_transmit_skb(sk, skb_clone(skb, GFP_KERNEL)); DCCP_INC_STATS(DCCP_MIB_ACTIVEOPENS); /* Timer for repeating the REQUEST until an answer. */ - icsk->icsk_retransmits = 0; inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, icsk->icsk_rto, DCCP_RTO_MAX); return 0; @@ -642,12 +571,6 @@ void dccp_send_sync(struct sock *sk, const u64 ackno, DCCP_SKB_CB(skb)->dccpd_type = pkt_type; DCCP_SKB_CB(skb)->dccpd_ack_seq = ackno; - /* - * Clear the flag in case the Sync was scheduled for out-of-band data, - * such as carrying a long Ack Vector. - */ - dccp_sk(sk)->dccps_sync_scheduled = 0; - dccp_transmit_skb(sk, skb); } @@ -676,7 +599,9 @@ void dccp_send_close(struct sock *sk, const int active) DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_CLOSE; if (active) { - skb = dccp_skb_entail(sk, skb); + dccp_write_xmit(sk, 1); + dccp_skb_entail(sk, skb); + dccp_transmit_skb(sk, skb_clone(skb, prio)); /* * Retransmission timer for active-close: RFC 4340, 8.3 requires * to retransmit the Close/CloseReq until the CLOSING/CLOSEREQ @@ -689,6 +614,6 @@ void dccp_send_close(struct sock *sk, const int active) */ inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, DCCP_TIMEOUT_INIT, DCCP_RTO_MAX); - } - dccp_transmit_skb(sk, skb); + } else + dccp_transmit_skb(sk, skb); } diff --git a/net/dccp/probe.c b/net/dccp/probe.c index eaa59d82ab0..81368a7f537 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -46,54 +46,75 @@ static struct { struct kfifo *fifo; spinlock_t lock; wait_queue_head_t wait; - ktime_t start; + struct timespec tstart; } dccpw; -static void jdccp_write_xmit(struct sock *sk) +static void printl(const char *fmt, ...) { - const struct inet_sock *inet = inet_sk(sk); - struct ccid3_hc_tx_sock *hctx = NULL; - struct timespec tv; - char buf[256]; - int len, ccid = ccid_get_current_tx_ccid(dccp_sk(sk)); + va_list args; + int len; + struct timespec now; + char tbuf[256]; - if (ccid == DCCPC_CCID3) - hctx = ccid3_hc_tx_sk(sk); + va_start(args, fmt); + getnstimeofday(&now); - if (!port || ntohs(inet->dport) == port || ntohs(inet->sport) == port) { + now = timespec_sub(now, dccpw.tstart); - tv = ktime_to_timespec(ktime_sub(ktime_get(), dccpw.start)); - len = sprintf(buf, "%lu.%09lu %d.%d.%d.%d:%u %d.%d.%d.%d:%u %d", - (unsigned long)tv.tv_sec, - (unsigned long)tv.tv_nsec, - NIPQUAD(inet->saddr), ntohs(inet->sport), - NIPQUAD(inet->daddr), ntohs(inet->dport), ccid); + len = sprintf(tbuf, "%lu.%06lu ", + (unsigned long) now.tv_sec, + (unsigned long) now.tv_nsec / NSEC_PER_USEC); + len += vscnprintf(tbuf+len, sizeof(tbuf)-len, fmt, args); + va_end(args); + kfifo_put(dccpw.fifo, tbuf, len); + wake_up(&dccpw.wait); +} + +static int jdccp_sendmsg(struct kiocb *iocb, struct sock *sk, + struct msghdr *msg, size_t size) +{ + const struct dccp_minisock *dmsk = dccp_msk(sk); + const struct inet_sock *inet = inet_sk(sk); + const struct ccid3_hc_tx_sock *hctx; + + if (dmsk->dccpms_tx_ccid == DCCPC_CCID3) + hctx = ccid3_hc_tx_sk(sk); + else + hctx = NULL; + + if (port == 0 || ntohs(inet->dport) == port || + ntohs(inet->sport) == port) { if (hctx) - len += sprintf(buf + len, " %d %d %d %u %u %u %d", - hctx->s, hctx->rtt, hctx->p, hctx->x_calc, - (unsigned)(hctx->x_recv >> 6), - (unsigned)(hctx->x >> 6), hctx->t_ipi); - - len += sprintf(buf + len, "\n"); - kfifo_put(dccpw.fifo, buf, len); - wake_up(&dccpw.wait); + printl("%d.%d.%d.%d:%u %d.%d.%d.%d:%u %d %d %d %d %u " + "%llu %llu %d\n", + NIPQUAD(inet->saddr), ntohs(inet->sport), + NIPQUAD(inet->daddr), ntohs(inet->dport), size, + hctx->ccid3hctx_s, hctx->ccid3hctx_rtt, + hctx->ccid3hctx_p, hctx->ccid3hctx_x_calc, + hctx->ccid3hctx_x_recv >> 6, + hctx->ccid3hctx_x >> 6, hctx->ccid3hctx_t_ipi); + else + printl("%d.%d.%d.%d:%u %d.%d.%d.%d:%u %d\n", + NIPQUAD(inet->saddr), ntohs(inet->sport), + NIPQUAD(inet->daddr), ntohs(inet->dport), size); } jprobe_return(); + return 0; } static struct jprobe dccp_send_probe = { .kp = { - .symbol_name = "dccp_write_xmit", + .symbol_name = "dccp_sendmsg", }, - .entry = jdccp_write_xmit, + .entry = jdccp_sendmsg, }; static int dccpprobe_open(struct inode *inode, struct file *file) { kfifo_reset(dccpw.fifo); - dccpw.start = ktime_get(); + getnstimeofday(&dccpw.tstart); return 0; } diff --git a/net/dccp/proto.c b/net/dccp/proto.c index ecf3be961e1..d0bd3481976 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -67,9 +67,6 @@ void dccp_set_state(struct sock *sk, const int state) case DCCP_OPEN: if (oldstate != DCCP_OPEN) DCCP_INC_STATS(DCCP_MIB_CURRESTAB); - /* Client retransmits all Confirm options until entering OPEN */ - if (oldstate == DCCP_PARTOPEN) - dccp_feat_list_purge(&dccp_sk(sk)->dccps_featneg); break; case DCCP_CLOSED: @@ -178,25 +175,63 @@ EXPORT_SYMBOL_GPL(dccp_state_name); int dccp_init_sock(struct sock *sk, const __u8 ctl_sock_initialized) { struct dccp_sock *dp = dccp_sk(sk); + struct dccp_minisock *dmsk = dccp_msk(sk); struct inet_connection_sock *icsk = inet_csk(sk); + dccp_minisock_init(&dp->dccps_minisock); + icsk->icsk_rto = DCCP_TIMEOUT_INIT; icsk->icsk_syn_retries = sysctl_dccp_request_retries; sk->sk_state = DCCP_CLOSED; sk->sk_write_space = dccp_write_space; icsk->icsk_sync_mss = dccp_sync_mss; - dp->dccps_mss_cache = TCP_MIN_RCVMSS; + dp->dccps_mss_cache = 536; dp->dccps_rate_last = jiffies; dp->dccps_role = DCCP_ROLE_UNDEFINED; dp->dccps_service = DCCP_SERVICE_CODE_IS_ABSENT; - dp->dccps_tx_qlen = sysctl_dccp_tx_qlen; + dp->dccps_l_ack_ratio = dp->dccps_r_ack_ratio = 1; dccp_init_xmit_timers(sk); - INIT_LIST_HEAD(&dp->dccps_featneg); - /* control socket doesn't need feat nego */ - if (likely(ctl_sock_initialized)) - return dccp_feat_init(sk); + /* + * FIXME: We're hardcoding the CCID, and doing this at this point makes + * the listening (master) sock get CCID control blocks, which is not + * necessary, but for now, to not mess with the test userspace apps, + * lets leave it here, later the real solution is to do this in a + * setsockopt(CCIDs-I-want/accept). -acme + */ + if (likely(ctl_sock_initialized)) { + int rc = dccp_feat_init(dmsk); + + if (rc) + return rc; + + if (dmsk->dccpms_send_ack_vector) { + dp->dccps_hc_rx_ackvec = dccp_ackvec_alloc(GFP_KERNEL); + if (dp->dccps_hc_rx_ackvec == NULL) + return -ENOMEM; + } + dp->dccps_hc_rx_ccid = ccid_hc_rx_new(dmsk->dccpms_rx_ccid, + sk, GFP_KERNEL); + dp->dccps_hc_tx_ccid = ccid_hc_tx_new(dmsk->dccpms_tx_ccid, + sk, GFP_KERNEL); + if (unlikely(dp->dccps_hc_rx_ccid == NULL || + dp->dccps_hc_tx_ccid == NULL)) { + ccid_hc_rx_delete(dp->dccps_hc_rx_ccid, sk); + ccid_hc_tx_delete(dp->dccps_hc_tx_ccid, sk); + if (dmsk->dccpms_send_ack_vector) { + dccp_ackvec_free(dp->dccps_hc_rx_ackvec); + dp->dccps_hc_rx_ackvec = NULL; + } + dp->dccps_hc_rx_ccid = dp->dccps_hc_tx_ccid = NULL; + return -ENOMEM; + } + } else { + /* control socket doesn't need feat nego */ + INIT_LIST_HEAD(&dmsk->dccpms_pending); + INIT_LIST_HEAD(&dmsk->dccpms_conf); + } + return 0; } @@ -205,6 +240,7 @@ EXPORT_SYMBOL_GPL(dccp_init_sock); void dccp_destroy_sock(struct sock *sk) { struct dccp_sock *dp = dccp_sk(sk); + struct dccp_minisock *dmsk = dccp_msk(sk); /* * DCCP doesn't use sk_write_queue, just sk_send_head @@ -222,7 +258,7 @@ void dccp_destroy_sock(struct sock *sk) kfree(dp->dccps_service_list); dp->dccps_service_list = NULL; - if (dp->dccps_hc_rx_ackvec != NULL) { + if (dmsk->dccpms_send_ack_vector) { dccp_ackvec_free(dp->dccps_hc_rx_ackvec); dp->dccps_hc_rx_ackvec = NULL; } @@ -231,7 +267,7 @@ void dccp_destroy_sock(struct sock *sk) dp->dccps_hc_rx_ccid = dp->dccps_hc_tx_ccid = NULL; /* clean up feature negotiation state */ - dccp_feat_list_purge(&dp->dccps_featneg); + dccp_feat_clean(dmsk); } EXPORT_SYMBOL_GPL(dccp_destroy_sock); @@ -241,9 +277,6 @@ static inline int dccp_listen_start(struct sock *sk, int backlog) struct dccp_sock *dp = dccp_sk(sk); dp->dccps_role = DCCP_ROLE_LISTEN; - /* do not start to listen if feature negotiation setup fails */ - if (dccp_feat_finalise_settings(dp)) - return -EPROTO; return inet_csk_listen_start(sk, backlog); } @@ -433,70 +466,42 @@ static int dccp_setsockopt_service(struct sock *sk, const __be32 service, return 0; } -static int dccp_setsockopt_cscov(struct sock *sk, int cscov, bool rx) +/* byte 1 is feature. the rest is the preference list */ +static int dccp_setsockopt_change(struct sock *sk, int type, + struct dccp_so_feat __user *optval) { - u8 *list, len; - int i, rc; + struct dccp_so_feat opt; + u8 *val; + int rc; - if (cscov < 0 || cscov > 15) - return -EINVAL; + if (copy_from_user(&opt, optval, sizeof(opt))) + return -EFAULT; /* - * Populate a list of permissible values, in the range cscov...15. This - * is necessary since feature negotiation of single values only works if - * both sides incidentally choose the same value. Since the list starts - * lowest-value first, negotiation will pick the smallest shared value. + * rfc4340: 6.1. Change Options */ - if (cscov == 0) - return 0; - len = 16 - cscov; - - list = kmalloc(len, GFP_KERNEL); - if (list == NULL) - return -ENOBUFS; - - for (i = 0; i < len; i++) - list[i] = cscov++; - - rc = dccp_feat_register_sp(sk, DCCPF_MIN_CSUM_COVER, rx, list, len); - - if (rc == 0) { - if (rx) - dccp_sk(sk)->dccps_pcrlen = cscov; - else - dccp_sk(sk)->dccps_pcslen = cscov; - } - kfree(list); - return rc; -} - -static int dccp_setsockopt_ccid(struct sock *sk, int type, - char __user *optval, int optlen) -{ - u8 *val; - int rc = 0; - - if (optlen < 1 || optlen > DCCP_FEAT_MAX_SP_VALS) + if (opt.dccpsf_len < 1) return -EINVAL; - val = kmalloc(optlen, GFP_KERNEL); - if (val == NULL) + val = kmalloc(opt.dccpsf_len, GFP_KERNEL); + if (!val) return -ENOMEM; - if (copy_from_user(val, optval, optlen)) { - kfree(val); - return -EFAULT; + if (copy_from_user(val, opt.dccpsf_val, opt.dccpsf_len)) { + rc = -EFAULT; + goto out_free_val; } - lock_sock(sk); - if (type == DCCP_SOCKOPT_TX_CCID || type == DCCP_SOCKOPT_CCID) - rc = dccp_feat_register_sp(sk, DCCPF_CCID, 1, val, optlen); + rc = dccp_feat_change(dccp_msk(sk), type, opt.dccpsf_feat, + val, opt.dccpsf_len, GFP_KERNEL); + if (rc) + goto out_free_val; - if (!rc && (type == DCCP_SOCKOPT_RX_CCID || type == DCCP_SOCKOPT_CCID)) - rc = dccp_feat_register_sp(sk, DCCPF_CCID, 0, val, optlen); - release_sock(sk); +out: + return rc; +out_free_val: kfree(val); - return rc; + goto out; } static int do_dccp_setsockopt(struct sock *sk, int level, int optname, @@ -505,21 +510,7 @@ static int do_dccp_setsockopt(struct sock *sk, int level, int optname, struct dccp_sock *dp = dccp_sk(sk); int val, err = 0; - switch (optname) { - case DCCP_SOCKOPT_PACKET_SIZE: - DCCP_WARN("sockopt(PACKET_SIZE) is deprecated: fix your app\n"); - return 0; - case DCCP_SOCKOPT_CHANGE_L: - case DCCP_SOCKOPT_CHANGE_R: - DCCP_WARN("sockopt(CHANGE_L/R) is deprecated: fix your app\n"); - return 0; - case DCCP_SOCKOPT_CCID: - case DCCP_SOCKOPT_RX_CCID: - case DCCP_SOCKOPT_TX_CCID: - return dccp_setsockopt_ccid(sk, optname, optval, optlen); - } - - if (optlen < (int)sizeof(int)) + if (optlen < sizeof(int)) return -EINVAL; if (get_user(val, (int __user *)optval)) @@ -530,38 +521,53 @@ static int do_dccp_setsockopt(struct sock *sk, int level, int optname, lock_sock(sk); switch (optname) { + case DCCP_SOCKOPT_PACKET_SIZE: + DCCP_WARN("sockopt(PACKET_SIZE) is deprecated: fix your app\n"); + err = 0; + break; + case DCCP_SOCKOPT_CHANGE_L: + if (optlen != sizeof(struct dccp_so_feat)) + err = -EINVAL; + else + err = dccp_setsockopt_change(sk, DCCPO_CHANGE_L, + (struct dccp_so_feat __user *) + optval); + break; + case DCCP_SOCKOPT_CHANGE_R: + if (optlen != sizeof(struct dccp_so_feat)) + err = -EINVAL; + else + err = dccp_setsockopt_change(sk, DCCPO_CHANGE_R, + (struct dccp_so_feat __user *) + optval); + break; case DCCP_SOCKOPT_SERVER_TIMEWAIT: if (dp->dccps_role != DCCP_ROLE_SERVER) err = -EOPNOTSUPP; else dp->dccps_server_timewait = (val != 0); break; - case DCCP_SOCKOPT_SEND_CSCOV: - err = dccp_setsockopt_cscov(sk, val, false); - break; - case DCCP_SOCKOPT_RECV_CSCOV: - err = dccp_setsockopt_cscov(sk, val, true); - break; - case DCCP_SOCKOPT_QPOLICY_ID: - if (sk->sk_state != DCCP_CLOSED) - err = -EISCONN; - else if (val < 0 || val >= DCCPQ_POLICY_MAX) + case DCCP_SOCKOPT_SEND_CSCOV: /* sender side, RFC 4340, sec. 9.2 */ + if (val < 0 || val > 15) err = -EINVAL; else - dp->dccps_qpolicy = val; + dp->dccps_pcslen = val; break; - case DCCP_SOCKOPT_QPOLICY_TXQLEN: - if (val < 0) + case DCCP_SOCKOPT_RECV_CSCOV: /* receiver side, RFC 4340 sec. 9.2.1 */ + if (val < 0 || val > 15) err = -EINVAL; - else - dp->dccps_tx_qlen = val; + else { + dp->dccps_pcrlen = val; + /* FIXME: add feature negotiation, + * ChangeL(MinimumChecksumCoverage, val) */ + } break; default: err = -ENOPROTOOPT; break; } - release_sock(sk); + release_sock(sk); return err; } @@ -642,18 +648,6 @@ static int do_dccp_getsockopt(struct sock *sk, int level, int optname, case DCCP_SOCKOPT_GET_CUR_MPS: val = dp->dccps_mss_cache; break; - case DCCP_SOCKOPT_AVAILABLE_CCIDS: - return ccid_getsockopt_builtin_ccids(sk, len, optval, optlen); - case DCCP_SOCKOPT_TX_CCID: - val = ccid_get_current_tx_ccid(dp); - if (val < 0) - return -ENOPROTOOPT; - break; - case DCCP_SOCKOPT_RX_CCID: - val = ccid_get_current_rx_ccid(dp); - if (val < 0) - return -ENOPROTOOPT; - break; case DCCP_SOCKOPT_SERVER_TIMEWAIT: val = dp->dccps_server_timewait; break; @@ -663,12 +657,6 @@ static int do_dccp_getsockopt(struct sock *sk, int level, int optname, case DCCP_SOCKOPT_RECV_CSCOV: val = dp->dccps_pcrlen; break; - case DCCP_SOCKOPT_QPOLICY_ID: - val = dp->dccps_qpolicy; - break; - case DCCP_SOCKOPT_QPOLICY_TXQLEN: - val = dp->dccps_tx_qlen; - break; case 128 ... 191: return ccid_hc_rx_getsockopt(dp->dccps_hc_rx_ccid, sk, optname, len, (u32 __user *)optval, optlen); @@ -711,47 +699,6 @@ int compat_dccp_getsockopt(struct sock *sk, int level, int optname, EXPORT_SYMBOL_GPL(compat_dccp_getsockopt); #endif -static int dccp_msghdr_parse(struct msghdr *msg, struct sk_buff *skb) -{ - struct cmsghdr *cmsg = CMSG_FIRSTHDR(msg); - - /* - * Assign an (opaque) qpolicy priority value to skb->priority. - * - * We are overloading this skb field for use with the qpolicy subystem. - * The skb->priority is normally used for the SO_PRIORITY option, which - * is initialised from sk_priority. Since the assignment of sk_priority - * to skb->priority happens later (on layer 3), we overload this field - * for use with queueing priorities as long as the skb is on layer 4. - * The default priority value (if nothing is set) is 0. - */ - skb->priority = 0; - - for (; cmsg != NULL; cmsg = CMSG_NXTHDR(msg, cmsg)) { - - if (!CMSG_OK(msg, cmsg)) - return -EINVAL; - - if (cmsg->cmsg_level != SOL_DCCP) - continue; - - if (cmsg->cmsg_type <= DCCP_SCM_QPOLICY_MAX && - !dccp_qpolicy_param_ok(skb->sk, cmsg->cmsg_type)) - return -EINVAL; - - switch (cmsg->cmsg_type) { - case DCCP_SCM_PRIORITY: - if (cmsg->cmsg_len != CMSG_LEN(sizeof(__u32))) - return -EINVAL; - skb->priority = *(__u32 *)CMSG_DATA(cmsg); - break; - default: - return -EINVAL; - } - } - return 0; -} - int dccp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, size_t len) { @@ -767,7 +714,8 @@ int dccp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, lock_sock(sk); - if (dccp_qpolicy_full(sk)) { + if (sysctl_dccp_tx_qlen && + (sk->sk_write_queue.qlen >= sysctl_dccp_tx_qlen)) { rc = -EAGAIN; goto out_release; } @@ -795,12 +743,8 @@ int dccp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, if (rc != 0) goto out_discard; - rc = dccp_msghdr_parse(msg, skb); - if (rc != 0) - goto out_discard; - - dccp_qpolicy_push(sk, skb); - dccp_write_xmit(sk); + skb_queue_tail(&sk->sk_write_queue, skb); + dccp_write_xmit(sk,0); out_release: release_sock(sk); return rc ? : len; @@ -1023,22 +967,9 @@ void dccp_close(struct sock *sk, long timeout) /* Check zero linger _after_ checking for unread data. */ sk->sk_prot->disconnect(sk, 0); } else if (sk->sk_state != DCCP_CLOSED) { - /* - * Normal connection termination. May need to wait if there are - * still packets in the TX queue that are delayed by the CCID. - */ - dccp_flush_write_queue(sk, &timeout); dccp_terminate_connection(sk); } - /* - * Flush write queue. This may be necessary in several cases: - * - we have been closed by the peer but still have application data; - * - abortive termination (unread data or zero linger time), - * - normal termination but queue could not be flushed within time limit - */ - __skb_queue_purge(&sk->sk_write_queue); - sk_stream_wait_close(sk, timeout); adjudge_to_death: diff --git a/net/dccp/qpolicy.c b/net/dccp/qpolicy.c deleted file mode 100644 index 27383f88c75..00000000000 --- a/net/dccp/qpolicy.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * net/dccp/qpolicy.c - * - * Policy-based packet dequeueing interface for DCCP. - * - * Copyright (c) 2008 Tomasz Grobelny - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License v2 - * as published by the Free Software Foundation. - */ -#include "dccp.h" - -/* - * Simple Dequeueing Policy: - * If tx_qlen is different from 0, enqueue up to tx_qlen elements. - */ -static void qpolicy_simple_push(struct sock *sk, struct sk_buff *skb) -{ - skb_queue_tail(&sk->sk_write_queue, skb); -} - -static bool qpolicy_simple_full(struct sock *sk) -{ - return dccp_sk(sk)->dccps_tx_qlen && - sk->sk_write_queue.qlen >= dccp_sk(sk)->dccps_tx_qlen; -} - -static struct sk_buff *qpolicy_simple_top(struct sock *sk) -{ - return skb_peek(&sk->sk_write_queue); -} - -/* - * Priority-based Dequeueing Policy: - * If tx_qlen is different from 0 and the queue has reached its upper bound - * of tx_qlen elements, replace older packets lowest-priority-first. - */ -static struct sk_buff *qpolicy_prio_best_skb(struct sock *sk) -{ - struct sk_buff *skb, *best = NULL; - - skb_queue_walk(&sk->sk_write_queue, skb) - if (best == NULL || skb->priority > best->priority) - best = skb; - return best; -} - -static struct sk_buff *qpolicy_prio_worst_skb(struct sock *sk) -{ - struct sk_buff *skb, *worst = NULL; - - skb_queue_walk(&sk->sk_write_queue, skb) - if (worst == NULL || skb->priority < worst->priority) - worst = skb; - return worst; -} - -static bool qpolicy_prio_full(struct sock *sk) -{ - if (qpolicy_simple_full(sk)) - dccp_qpolicy_drop(sk, qpolicy_prio_worst_skb(sk)); - return false; -} - -/** - * struct dccp_qpolicy_operations - TX Packet Dequeueing Interface - * @push: add a new @skb to the write queue - * @full: indicates that no more packets will be admitted - * @top: peeks at whatever the queueing policy defines as its `top' - */ -static struct dccp_qpolicy_operations { - void (*push) (struct sock *sk, struct sk_buff *skb); - bool (*full) (struct sock *sk); - struct sk_buff* (*top) (struct sock *sk); - __be32 params; - -} qpol_table[DCCPQ_POLICY_MAX] = { - [DCCPQ_POLICY_SIMPLE] = { - .push = qpolicy_simple_push, - .full = qpolicy_simple_full, - .top = qpolicy_simple_top, - .params = 0, - }, - [DCCPQ_POLICY_PRIO] = { - .push = qpolicy_simple_push, - .full = qpolicy_prio_full, - .top = qpolicy_prio_best_skb, - .params = DCCP_SCM_PRIORITY, - }, -}; - -/* - * Externally visible interface - */ -void dccp_qpolicy_push(struct sock *sk, struct sk_buff *skb) -{ - qpol_table[dccp_sk(sk)->dccps_qpolicy].push(sk, skb); -} - -bool dccp_qpolicy_full(struct sock *sk) -{ - return qpol_table[dccp_sk(sk)->dccps_qpolicy].full(sk); -} - -void dccp_qpolicy_drop(struct sock *sk, struct sk_buff *skb) -{ - if (skb != NULL) { - skb_unlink(skb, &sk->sk_write_queue); - kfree_skb(skb); - } -} - -struct sk_buff *dccp_qpolicy_top(struct sock *sk) -{ - return qpol_table[dccp_sk(sk)->dccps_qpolicy].top(sk); -} - -struct sk_buff *dccp_qpolicy_pop(struct sock *sk) -{ - struct sk_buff *skb = dccp_qpolicy_top(sk); - - /* Clear any skb fields that we used internally */ - skb->priority = 0; - - if (skb) - skb_unlink(skb, &sk->sk_write_queue); - return skb; -} - -bool dccp_qpolicy_param_ok(struct sock *sk, __be32 param) -{ - /* check if exactly one bit is set */ - if (!param || (param & (param - 1))) - return false; - return (qpol_table[dccp_sk(sk)->dccps_qpolicy].params & param) == param; -} diff --git a/net/dccp/sysctl.c b/net/dccp/sysctl.c index a5a1856234e..21295993fdb 100644 --- a/net/dccp/sysctl.c +++ b/net/dccp/sysctl.c @@ -18,72 +18,76 @@ #error This file should not be compiled without CONFIG_SYSCTL defined #endif -/* Boundary values */ -static int zero = 0, - u8_max = 0xFF; -static unsigned long seqw_min = 32; - static struct ctl_table dccp_default_table[] = { { .procname = "seq_window", - .data = &sysctl_dccp_sequence_window, - .maxlen = sizeof(sysctl_dccp_sequence_window), + .data = &sysctl_dccp_feat_sequence_window, + .maxlen = sizeof(sysctl_dccp_feat_sequence_window), .mode = 0644, - .proc_handler = proc_doulongvec_minmax, - .extra1 = &seqw_min, /* RFC 4340, 7.5.2 */ + .proc_handler = proc_dointvec, }, { .procname = "rx_ccid", - .data = &sysctl_dccp_rx_ccid, - .maxlen = sizeof(sysctl_dccp_rx_ccid), + .data = &sysctl_dccp_feat_rx_ccid, + .maxlen = sizeof(sysctl_dccp_feat_rx_ccid), .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &zero, - .extra2 = &u8_max, /* RFC 4340, 10. */ + .proc_handler = proc_dointvec, }, { .procname = "tx_ccid", - .data = &sysctl_dccp_tx_ccid, - .maxlen = sizeof(sysctl_dccp_tx_ccid), + .data = &sysctl_dccp_feat_tx_ccid, + .maxlen = sizeof(sysctl_dccp_feat_tx_ccid), + .mode = 0644, + .proc_handler = proc_dointvec, + }, + { + .procname = "ack_ratio", + .data = &sysctl_dccp_feat_ack_ratio, + .maxlen = sizeof(sysctl_dccp_feat_ack_ratio), + .mode = 0644, + .proc_handler = proc_dointvec, + }, + { + .procname = "send_ackvec", + .data = &sysctl_dccp_feat_send_ack_vector, + .maxlen = sizeof(sysctl_dccp_feat_send_ack_vector), + .mode = 0644, + .proc_handler = proc_dointvec, + }, + { + .procname = "send_ndp", + .data = &sysctl_dccp_feat_send_ndp_count, + .maxlen = sizeof(sysctl_dccp_feat_send_ndp_count), .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &zero, - .extra2 = &u8_max, /* RFC 4340, 10. */ + .proc_handler = proc_dointvec, }, { .procname = "request_retries", .data = &sysctl_dccp_request_retries, .maxlen = sizeof(sysctl_dccp_request_retries), .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &zero, - .extra2 = &u8_max, + .proc_handler = proc_dointvec, }, { .procname = "retries1", .data = &sysctl_dccp_retries1, .maxlen = sizeof(sysctl_dccp_retries1), .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &zero, - .extra2 = &u8_max, + .proc_handler = proc_dointvec, }, { .procname = "retries2", .data = &sysctl_dccp_retries2, .maxlen = sizeof(sysctl_dccp_retries2), .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &zero, - .extra2 = &u8_max, + .proc_handler = proc_dointvec, }, { .procname = "tx_qlen", .data = &sysctl_dccp_tx_qlen, .maxlen = sizeof(sysctl_dccp_tx_qlen), .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &zero, + .proc_handler = proc_dointvec, }, { .procname = "sync_ratelimit", diff --git a/net/dccp/timer.c b/net/dccp/timer.c index 16359e29e7f..54b3c7e9e01 100644 --- a/net/dccp/timer.c +++ b/net/dccp/timer.c @@ -87,6 +87,17 @@ static void dccp_retransmit_timer(struct sock *sk) { struct inet_connection_sock *icsk = inet_csk(sk); + /* retransmit timer is used for feature negotiation throughout + * connection. In this case, no packet is re-transmitted, but rather an + * ack is generated and pending changes are placed into its options. + */ + if (sk->sk_send_head == NULL) { + dccp_pr_debug("feat negotiation retransmit timeout %p\n", sk); + if (sk->sk_state == DCCP_OPEN) + dccp_send_ack(sk); + goto backoff; + } + /* * More than than 4MSL (8 minutes) has passed, a RESET(aborted) was * sent, no need to retransmit, this sock is dead. @@ -115,6 +126,7 @@ static void dccp_retransmit_timer(struct sock *sk) return; } +backoff: icsk->icsk_backoff++; icsk->icsk_rto = min(icsk->icsk_rto << 1, DCCP_RTO_MAX); @@ -237,35 +249,32 @@ out: sock_put(sk); } -/** - * dccp_write_xmitlet - Workhorse for CCID packet dequeueing interface - * See the comments above %ccid_dequeueing_decision for supported modes. - */ -static void dccp_write_xmitlet(unsigned long data) +/* Transmit-delay timer: used by the CCIDs to delay actual send time */ +static void dccp_write_xmit_timer(unsigned long data) { struct sock *sk = (struct sock *)data; + struct dccp_sock *dp = dccp_sk(sk); bh_lock_sock(sk); if (sock_owned_by_user(sk)) - sk_reset_timer(sk, &dccp_sk(sk)->dccps_xmit_timer, jiffies + 1); + sk_reset_timer(sk, &dp->dccps_xmit_timer, jiffies+1); else - dccp_write_xmit(sk); + dccp_write_xmit(sk, 0); bh_unlock_sock(sk); + sock_put(sk); } -static void dccp_write_xmit_timer(unsigned long data) +static void dccp_init_write_xmit_timer(struct sock *sk) { - dccp_write_xmitlet(data); - sock_put((struct sock *)data); + struct dccp_sock *dp = dccp_sk(sk); + + setup_timer(&dp->dccps_xmit_timer, dccp_write_xmit_timer, + (unsigned long)sk); } void dccp_init_xmit_timers(struct sock *sk) { - struct dccp_sock *dp = dccp_sk(sk); - - tasklet_init(&dp->dccps_xmitlet, dccp_write_xmitlet, (unsigned long)sk); - setup_timer(&dp->dccps_xmit_timer, dccp_write_xmit_timer, - (unsigned long)sk); + dccp_init_write_xmit_timer(sk); inet_csk_init_xmit_timers(sk, &dccp_write_timer, &dccp_delack_timer, &dccp_keepalive_timer); } @@ -281,7 +290,8 @@ u32 dccp_timestamp(void) { s64 delta = ktime_us_delta(ktime_get_real(), dccp_timestamp_seed); - return div_u64(delta, DCCP_TIME_RESOLUTION); + do_div(delta, 10); + return delta; } EXPORT_SYMBOL_GPL(dccp_timestamp); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 9da9f19ece8..f79a5160729 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -811,12 +811,25 @@ void tcp_update_metrics(struct sock *sk) } } +/* Numbers are taken from RFC3390. + * + * John Heffner states: + * + * The RFC specifies a window of no more than 4380 bytes + * unless 2*MSS > 4380. Reading the pseudocode in the RFC + * is a bit misleading because they use a clamp at 4380 bytes + * rather than use a multiplier in the relevant range. + */ __u32 tcp_init_cwnd(struct tcp_sock *tp, struct dst_entry *dst) { __u32 cwnd = (dst ? dst_metric(dst, RTAX_INITCWND) : 0); - if (!cwnd) - cwnd = rfc3390_bytes_to_packets(tp->mss_cache); + if (!cwnd) { + if (tp->mss_cache > 1460) + cwnd = 2; + else + cwnd = (tp->mss_cache > 1095) ? 3 : 4; + } return min_t(__u32, cwnd, tp->snd_cwnd_clamp); } -- cgit v1.2.3-70-g09d2 From adaae7215e5130e5ce1ac3ee390e5a23101b09b2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 9 Sep 2008 20:02:01 +0200 Subject: update Documentation/filesystems/Locking for 2.6.27 changes In the 2.6.27 circle ->fasync lost the BKL, and the last remaining ->open variant that takes the BKL is also gone. ->get_sb and ->kill_sb didn't have BKL forever, so updated the entries while we're at that. Signed-off-by: Christoph Hellwig Signed-off-by: Linus Torvalds --- Documentation/filesystems/Locking | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 680fb566b92..8362860e21a 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -144,8 +144,8 @@ prototypes: void (*kill_sb) (struct super_block *); locking rules: may block BKL -get_sb yes yes -kill_sb yes yes +get_sb yes no +kill_sb yes no ->get_sb() returns error or 0 with locked superblock attached to the vfsmount (exclusive on ->s_umount). @@ -409,12 +409,12 @@ ioctl: yes (see below) unlocked_ioctl: no (see below) compat_ioctl: no mmap: no -open: maybe (see below) +open: no flush: no release: no fsync: no (see below) aio_fsync: no -fasync: yes (see below) +fasync: no lock: yes readv: no writev: no @@ -431,13 +431,6 @@ For many filesystems, it is probably safe to acquire the inode semaphore. Note some filesystems (i.e. remote ones) provide no protection for i_size so you will need to use the BKL. -->open() locking is in-transit: big lock partially moved into the methods. -The only exception is ->open() in the instances of file_operations that never -end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices -(chrdev_open() takes lock before replacing ->f_op and calling the secondary -method. As soon as we fix the handling of module reference counters all -instances of ->open() will be called without the BKL. - Note: ext2_release() was *the* source of contention on fs-intensive loads and dropping BKL on ->release() helps to get rid of that (we still grab BKL for cases when we close a file that had been opened r/w, but that -- cgit v1.2.3-70-g09d2 From e8aed68614c81f24d8c4cbcb4923f848ece846e1 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Wed, 10 Sep 2008 11:01:07 +0800 Subject: doc/RCU: fix pseudocode in rcuref.txt atomic_inc_not_zero(v) return 0 if *v = 0. use spin_lock instead of write_lock for update lock. Signed-off-by: Lai Jiangshan Cc: "Paul E. McKenney" Signed-off-by: Ingo Molnar --- Documentation/RCU/rcuref.txt | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/RCU/rcuref.txt b/Documentation/RCU/rcuref.txt index 451de2ad832..4202ad09313 100644 --- a/Documentation/RCU/rcuref.txt +++ b/Documentation/RCU/rcuref.txt @@ -29,9 +29,9 @@ release_referenced() delete() } If this list/array is made lock free using RCU as in changing the -write_lock() in add() and delete() to spin_lock and changing read_lock -in search_and_reference to rcu_read_lock(), the atomic_get in -search_and_reference could potentially hold reference to an element which +write_lock() in add() and delete() to spin_lock() and changing read_lock() +in search_and_reference() to rcu_read_lock(), the atomic_inc() in +search_and_reference() could potentially hold reference to an element which has already been deleted from the list/array. Use atomic_inc_not_zero() in this scenario as follows: @@ -40,20 +40,20 @@ add() search_and_reference() { { alloc_object rcu_read_lock(); ... search_for_element - atomic_set(&el->rc, 1); if (atomic_inc_not_zero(&el->rc)) { - write_lock(&list_lock); rcu_read_unlock(); + atomic_set(&el->rc, 1); if (!atomic_inc_not_zero(&el->rc)) { + spin_lock(&list_lock); rcu_read_unlock(); return FAIL; add_element } ... ... - write_unlock(&list_lock); rcu_read_unlock(); + spin_unlock(&list_lock); rcu_read_unlock(); } } 3. 4. release_referenced() delete() { { - ... write_lock(&list_lock); + ... spin_lock(&list_lock); if (atomic_dec_and_test(&el->rc)) ... call_rcu(&el->head, el_free); delete_element - ... write_unlock(&list_lock); + ... spin_unlock(&list_lock); } ... if (atomic_dec_and_test(&el->rc)) call_rcu(&el->head, el_free); -- cgit v1.2.3-70-g09d2 From 46dfa040f6c26f416a0979a7cd5a2d81f08121d5 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 10 Sep 2008 22:22:34 +0200 Subject: add deprecated ide-scsi to feature-removal-schedule.txt Signed-off-by: FUJITA Tomonori Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/feature-removal-schedule.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index eb1a47b9742..83c88cae1ed 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -322,3 +322,11 @@ Why: Accounting can now be enabled/disabled without kernel recompilation. controlled by a kernel/module/sysfs/sysctl parameter. Who: Krzysztof Piotr Oledzki +--------------------------- + +What: ide-scsi (BLK_DEV_IDESCSI) +When: 2.6.29 +Why: The 2.6 kernel supports direct writing to ide CD drives, which + eliminates the need for ide-scsi. The new method is more + efficient in every way. +Who: FUJITA Tomonori -- cgit v1.2.3-70-g09d2 From 92651940ab00dbe64722e908f70d816713d677b7 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 12 Sep 2008 16:29:34 -0700 Subject: pkt_sched: Add multiqueue scheduler support This patch is intended to add a qdisc to support the new tx multiqueue architecture by providing a band for each hardware queue. By doing this it is possible to support a different qdisc per physical hardware queue. This qdisc uses the skb->queue_mapping to select which band to place the traffic onto. It then uses a round robin w/ a check to see if the subqueue is stopped to determine which band to dequeue the packet from. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- Documentation/networking/multiqueue.txt | 47 +++- include/linux/pkt_sched.h | 7 + net/sched/Kconfig | 9 + net/sched/Makefile | 1 + net/sched/sch_multiq.c | 467 ++++++++++++++++++++++++++++++++ 5 files changed, 530 insertions(+), 1 deletion(-) create mode 100644 net/sched/sch_multiq.c (limited to 'Documentation') diff --git a/Documentation/networking/multiqueue.txt b/Documentation/networking/multiqueue.txt index d391ea63114..5787ee6eca4 100644 --- a/Documentation/networking/multiqueue.txt +++ b/Documentation/networking/multiqueue.txt @@ -24,4 +24,49 @@ netif_{start|stop|wake}_subqueue() functions to manage each queue while the device is still operational. netdev->queue_lock is still used when the device comes online or when it's completely shut down (unregister_netdev(), etc.). -Author: Peter P. Waskiewicz Jr. + +Section 2: Qdisc support for multiqueue devices + +----------------------------------------------- + +Currently two qdiscs support multiqueue devices. The first is the default +pfifo_fast qdisc. This qdisc supports one qdisc per hardware queue. A new +round-robin qdisc, sch_multiq also supports multiple hardware queues. The +qdisc is responsible for classifying the skb's and then directing the skb's to +bands and queues based on the value in skb->queue_mapping. Use this field in +the base driver to determine which queue to send the skb to. + +sch_multiq has been added for hardware that wishes to avoid unnecessary +requeuing. It will cycle though the bands and verify that the hardware queue +associated with the band is not stopped prior to dequeuing a packet. + +On qdisc load, the number of bands is based on the number of queues on the +hardware. Once the association is made, any skb with skb->queue_mapping set, +will be queued to the band associated with the hardware queue. + + +Section 3: Brief howto using MULTIQ for multiqueue devices +--------------------------------------------------------------- + +The userspace command 'tc,' part of the iproute2 package, is used to configure +qdiscs. To add the MULTIQ qdisc to your network device, assuming the device +is called eth0, run the following command: + +# tc qdisc add dev eth0 root handle 1: multiq + +The qdisc will allocate the number of bands to equal the number of queues that +the device reports, and bring the qdisc online. Assuming eth0 has 4 Tx +queues, the band mapping would look like: + +band 0 => queue 0 +band 1 => queue 1 +band 2 => queue 2 +band 3 => queue 3 + +Traffic will begin flowing through each queue if your base device has either +the default simple_tx_hash or a custom netdev->select_queue() defined. + +The behavior of tc filters remains the same. + +Author: Alexander Duyck +Original Author: Peter P. Waskiewicz Jr. diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h index e5de421ac7b..5d921fa91a5 100644 --- a/include/linux/pkt_sched.h +++ b/include/linux/pkt_sched.h @@ -123,6 +123,13 @@ struct tc_prio_qopt __u8 priomap[TC_PRIO_MAX+1]; /* Map: logical priority -> PRIO band */ }; +/* MULTIQ section */ + +struct tc_multiq_qopt { + __u16 bands; /* Number of bands */ + __u16 max_bands; /* Maximum number of queues */ +}; + /* TBF section */ struct tc_tbf_qopt diff --git a/net/sched/Kconfig b/net/sched/Kconfig index 9437b27ff84..efaa7a75e7f 100644 --- a/net/sched/Kconfig +++ b/net/sched/Kconfig @@ -106,6 +106,15 @@ config NET_SCH_PRIO To compile this code as a module, choose M here: the module will be called sch_prio. +config NET_SCH_MULTIQ + tristate "Hardware Multiqueue-aware Multi Band Queuing (MULTIQ)" + ---help--- + Say Y here if you want to use an n-band queue packet scheduler + to support devices that have multiple hardware transmit queues. + + To compile this code as a module, choose M here: the + module will be called sch_multiq. + config NET_SCH_RED tristate "Random Early Detection (RED)" ---help--- diff --git a/net/sched/Makefile b/net/sched/Makefile index 1d2b0f7df84..3d9b953f7f6 100644 --- a/net/sched/Makefile +++ b/net/sched/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_NET_SCH_SFQ) += sch_sfq.o obj-$(CONFIG_NET_SCH_TBF) += sch_tbf.o obj-$(CONFIG_NET_SCH_TEQL) += sch_teql.o obj-$(CONFIG_NET_SCH_PRIO) += sch_prio.o +obj-$(CONFIG_NET_SCH_MULTIQ) += sch_multiq.o obj-$(CONFIG_NET_SCH_ATM) += sch_atm.o obj-$(CONFIG_NET_SCH_NETEM) += sch_netem.o obj-$(CONFIG_NET_CLS_U32) += cls_u32.o diff --git a/net/sched/sch_multiq.c b/net/sched/sch_multiq.c new file mode 100644 index 00000000000..49a8b67ed3b --- /dev/null +++ b/net/sched/sch_multiq.c @@ -0,0 +1,467 @@ +/* + * Copyright (c) 2008, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + * Author: Alexander Duyck + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +struct multiq_sched_data { + u16 bands; + u16 max_bands; + u16 curband; + struct tcf_proto *filter_list; + struct Qdisc **queues; +}; + + +static struct Qdisc * +multiq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + u32 band; + struct tcf_result res; + int err; + + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; + err = tc_classify(skb, q->filter_list, &res); +#ifdef CONFIG_NET_CLS_ACT + switch (err) { + case TC_ACT_STOLEN: + case TC_ACT_QUEUED: + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; + case TC_ACT_SHOT: + return NULL; + } +#endif + band = skb_get_queue_mapping(skb); + + if (band >= q->bands) + return q->queues[0]; + + return q->queues[band]; +} + +static int +multiq_enqueue(struct sk_buff *skb, struct Qdisc *sch) +{ + struct Qdisc *qdisc; + int ret; + + qdisc = multiq_classify(skb, sch, &ret); +#ifdef CONFIG_NET_CLS_ACT + if (qdisc == NULL) { + + if (ret & __NET_XMIT_BYPASS) + sch->qstats.drops++; + kfree_skb(skb); + return ret; + } +#endif + + ret = qdisc_enqueue(skb, qdisc); + if (ret == NET_XMIT_SUCCESS) { + sch->bstats.bytes += qdisc_pkt_len(skb); + sch->bstats.packets++; + sch->q.qlen++; + return NET_XMIT_SUCCESS; + } + if (net_xmit_drop_count(ret)) + sch->qstats.drops++; + return ret; +} + + +static int +multiq_requeue(struct sk_buff *skb, struct Qdisc *sch) +{ + struct Qdisc *qdisc; + int ret; + + qdisc = multiq_classify(skb, sch, &ret); +#ifdef CONFIG_NET_CLS_ACT + if (qdisc == NULL) { + if (ret & __NET_XMIT_BYPASS) + sch->qstats.drops++; + kfree_skb(skb); + return ret; + } +#endif + + ret = qdisc->ops->requeue(skb, qdisc); + if (ret == NET_XMIT_SUCCESS) { + sch->q.qlen++; + sch->qstats.requeues++; + return NET_XMIT_SUCCESS; + } + if (net_xmit_drop_count(ret)) + sch->qstats.drops++; + return ret; +} + + +static struct sk_buff *multiq_dequeue(struct Qdisc *sch) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + struct Qdisc *qdisc; + struct sk_buff *skb; + int band; + + for (band = 0; band < q->bands; band++) { + /* cycle through bands to ensure fairness */ + q->curband++; + if (q->curband >= q->bands) + q->curband = 0; + + /* Check that target subqueue is available before + * pulling an skb to avoid excessive requeues + */ + if (!__netif_subqueue_stopped(qdisc_dev(sch), q->curband)) { + qdisc = q->queues[q->curband]; + skb = qdisc->dequeue(qdisc); + if (skb) { + sch->q.qlen--; + return skb; + } + } + } + return NULL; + +} + +static unsigned int multiq_drop(struct Qdisc *sch) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + int band; + unsigned int len; + struct Qdisc *qdisc; + + for (band = q->bands-1; band >= 0; band--) { + qdisc = q->queues[band]; + if (qdisc->ops->drop) { + len = qdisc->ops->drop(qdisc); + if (len != 0) { + sch->q.qlen--; + return len; + } + } + } + return 0; +} + + +static void +multiq_reset(struct Qdisc *sch) +{ + u16 band; + struct multiq_sched_data *q = qdisc_priv(sch); + + for (band = 0; band < q->bands; band++) + qdisc_reset(q->queues[band]); + sch->q.qlen = 0; + q->curband = 0; +} + +static void +multiq_destroy(struct Qdisc *sch) +{ + int band; + struct multiq_sched_data *q = qdisc_priv(sch); + + tcf_destroy_chain(&q->filter_list); + for (band = 0; band < q->bands; band++) + qdisc_destroy(q->queues[band]); + + kfree(q->queues); +} + +static int multiq_tune(struct Qdisc *sch, struct nlattr *opt) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + struct tc_multiq_qopt *qopt; + int i; + + if (!netif_is_multiqueue(qdisc_dev(sch))) + return -EINVAL; + if (nla_len(opt) < sizeof(*qopt)) + return -EINVAL; + + qopt = nla_data(opt); + + qopt->bands = qdisc_dev(sch)->real_num_tx_queues; + + sch_tree_lock(sch); + q->bands = qopt->bands; + for (i = q->bands; i < q->max_bands; i++) { + struct Qdisc *child = xchg(&q->queues[i], &noop_qdisc); + if (child != &noop_qdisc) { + qdisc_tree_decrease_qlen(child, child->q.qlen); + qdisc_destroy(child); + } + } + + sch_tree_unlock(sch); + + for (i = 0; i < q->bands; i++) { + if (q->queues[i] == &noop_qdisc) { + struct Qdisc *child; + child = qdisc_create_dflt(qdisc_dev(sch), + sch->dev_queue, + &pfifo_qdisc_ops, + TC_H_MAKE(sch->handle, + i + 1)); + if (child) { + sch_tree_lock(sch); + child = xchg(&q->queues[i], child); + + if (child != &noop_qdisc) { + qdisc_tree_decrease_qlen(child, + child->q.qlen); + qdisc_destroy(child); + } + sch_tree_unlock(sch); + } + } + } + return 0; +} + +static int multiq_init(struct Qdisc *sch, struct nlattr *opt) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + int i; + + q->queues = NULL; + + if (opt == NULL) + return -EINVAL; + + q->max_bands = qdisc_dev(sch)->num_tx_queues; + + q->queues = kcalloc(q->max_bands, sizeof(struct Qdisc *), GFP_KERNEL); + if (!q->queues) + return -ENOBUFS; + for (i = 0; i < q->max_bands; i++) + q->queues[i] = &noop_qdisc; + + return multiq_tune(sch, opt); +} + +static int multiq_dump(struct Qdisc *sch, struct sk_buff *skb) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + unsigned char *b = skb_tail_pointer(skb); + struct tc_multiq_qopt opt; + + opt.bands = q->bands; + opt.max_bands = q->max_bands; + + NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt); + + return skb->len; + +nla_put_failure: + nlmsg_trim(skb, b); + return -1; +} + +static int multiq_graft(struct Qdisc *sch, unsigned long arg, struct Qdisc *new, + struct Qdisc **old) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + unsigned long band = arg - 1; + + if (band >= q->bands) + return -EINVAL; + + if (new == NULL) + new = &noop_qdisc; + + sch_tree_lock(sch); + *old = q->queues[band]; + q->queues[band] = new; + qdisc_tree_decrease_qlen(*old, (*old)->q.qlen); + qdisc_reset(*old); + sch_tree_unlock(sch); + + return 0; +} + +static struct Qdisc * +multiq_leaf(struct Qdisc *sch, unsigned long arg) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + unsigned long band = arg - 1; + + if (band >= q->bands) + return NULL; + + return q->queues[band]; +} + +static unsigned long multiq_get(struct Qdisc *sch, u32 classid) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + unsigned long band = TC_H_MIN(classid); + + if (band - 1 >= q->bands) + return 0; + return band; +} + +static unsigned long multiq_bind(struct Qdisc *sch, unsigned long parent, + u32 classid) +{ + return multiq_get(sch, classid); +} + + +static void multiq_put(struct Qdisc *q, unsigned long cl) +{ + return; +} + +static int multiq_change(struct Qdisc *sch, u32 handle, u32 parent, + struct nlattr **tca, unsigned long *arg) +{ + unsigned long cl = *arg; + struct multiq_sched_data *q = qdisc_priv(sch); + + if (cl - 1 > q->bands) + return -ENOENT; + return 0; +} + +static int multiq_delete(struct Qdisc *sch, unsigned long cl) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + if (cl - 1 > q->bands) + return -ENOENT; + return 0; +} + + +static int multiq_dump_class(struct Qdisc *sch, unsigned long cl, + struct sk_buff *skb, struct tcmsg *tcm) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + + if (cl - 1 > q->bands) + return -ENOENT; + tcm->tcm_handle |= TC_H_MIN(cl); + if (q->queues[cl-1]) + tcm->tcm_info = q->queues[cl-1]->handle; + return 0; +} + +static int multiq_dump_class_stats(struct Qdisc *sch, unsigned long cl, + struct gnet_dump *d) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + struct Qdisc *cl_q; + + cl_q = q->queues[cl - 1]; + if (gnet_stats_copy_basic(d, &cl_q->bstats) < 0 || + gnet_stats_copy_queue(d, &cl_q->qstats) < 0) + return -1; + + return 0; +} + +static void multiq_walk(struct Qdisc *sch, struct qdisc_walker *arg) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + int band; + + if (arg->stop) + return; + + for (band = 0; band < q->bands; band++) { + if (arg->count < arg->skip) { + arg->count++; + continue; + } + if (arg->fn(sch, band+1, arg) < 0) { + arg->stop = 1; + break; + } + arg->count++; + } +} + +static struct tcf_proto **multiq_find_tcf(struct Qdisc *sch, unsigned long cl) +{ + struct multiq_sched_data *q = qdisc_priv(sch); + + if (cl) + return NULL; + return &q->filter_list; +} + +static const struct Qdisc_class_ops multiq_class_ops = { + .graft = multiq_graft, + .leaf = multiq_leaf, + .get = multiq_get, + .put = multiq_put, + .change = multiq_change, + .delete = multiq_delete, + .walk = multiq_walk, + .tcf_chain = multiq_find_tcf, + .bind_tcf = multiq_bind, + .unbind_tcf = multiq_put, + .dump = multiq_dump_class, + .dump_stats = multiq_dump_class_stats, +}; + +static struct Qdisc_ops multiq_qdisc_ops __read_mostly = { + .next = NULL, + .cl_ops = &multiq_class_ops, + .id = "multiq", + .priv_size = sizeof(struct multiq_sched_data), + .enqueue = multiq_enqueue, + .dequeue = multiq_dequeue, + .requeue = multiq_requeue, + .drop = multiq_drop, + .init = multiq_init, + .reset = multiq_reset, + .destroy = multiq_destroy, + .change = multiq_tune, + .dump = multiq_dump, + .owner = THIS_MODULE, +}; + +static int __init multiq_module_init(void) +{ + return register_qdisc(&multiq_qdisc_ops); +} + +static void __exit multiq_module_exit(void) +{ + unregister_qdisc(&multiq_qdisc_ops); +} + +module_init(multiq_module_init) +module_exit(multiq_module_exit) + +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From ca9b0e27e072be4cef2f5f0cbc0b0fd94eae3520 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 12 Sep 2008 16:30:20 -0700 Subject: pkt_action: add new action skbedit This new action will have the ability to change the priority and/or queue_mapping fields on an sk_buff. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- Documentation/networking/multiqueue.txt | 9 +- include/linux/tc_act/Kbuild | 1 + include/linux/tc_act/tc_skbedit.h | 44 +++++++ include/net/tc_act/tc_skbedit.h | 34 ++++++ net/sched/Kconfig | 11 ++ net/sched/Makefile | 1 + net/sched/act_skbedit.c | 203 ++++++++++++++++++++++++++++++++ 7 files changed, 302 insertions(+), 1 deletion(-) create mode 100644 include/linux/tc_act/tc_skbedit.h create mode 100644 include/net/tc_act/tc_skbedit.h create mode 100644 net/sched/act_skbedit.c (limited to 'Documentation') diff --git a/Documentation/networking/multiqueue.txt b/Documentation/networking/multiqueue.txt index 5787ee6eca4..10113ffa807 100644 --- a/Documentation/networking/multiqueue.txt +++ b/Documentation/networking/multiqueue.txt @@ -66,7 +66,14 @@ band 3 => queue 3 Traffic will begin flowing through each queue if your base device has either the default simple_tx_hash or a custom netdev->select_queue() defined. -The behavior of tc filters remains the same. +The behavior of tc filters remains the same. However a new tc action, +skbedit, has been added. Assuming you wanted to route all traffic to a +specific host, for example 192.168.0.3, though a specific queue you could use +this action and establish a filter such as: + +tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \ + match ip dst 192.168.0.3 \ + action skbedit queue_mapping 3 Author: Alexander Duyck Original Author: Peter P. Waskiewicz Jr. diff --git a/include/linux/tc_act/Kbuild b/include/linux/tc_act/Kbuild index 6dac0d7365c..76990937f4c 100644 --- a/include/linux/tc_act/Kbuild +++ b/include/linux/tc_act/Kbuild @@ -3,3 +3,4 @@ header-y += tc_ipt.h header-y += tc_mirred.h header-y += tc_pedit.h header-y += tc_nat.h +header-y += tc_skbedit.h diff --git a/include/linux/tc_act/tc_skbedit.h b/include/linux/tc_act/tc_skbedit.h new file mode 100644 index 00000000000..a14e461a7af --- /dev/null +++ b/include/linux/tc_act/tc_skbedit.h @@ -0,0 +1,44 @@ +/* + * Copyright (c) 2008, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + * Author: Alexander Duyck + */ + +#ifndef __LINUX_TC_SKBEDIT_H +#define __LINUX_TC_SKBEDIT_H + +#include + +#define TCA_ACT_SKBEDIT 11 + +#define SKBEDIT_F_PRIORITY 0x1 +#define SKBEDIT_F_QUEUE_MAPPING 0x2 + +struct tc_skbedit { + tc_gen; +}; + +enum { + TCA_SKBEDIT_UNSPEC, + TCA_SKBEDIT_TM, + TCA_SKBEDIT_PARMS, + TCA_SKBEDIT_PRIORITY, + TCA_SKBEDIT_QUEUE_MAPPING, + __TCA_SKBEDIT_MAX +}; +#define TCA_SKBEDIT_MAX (__TCA_SKBEDIT_MAX - 1) + +#endif diff --git a/include/net/tc_act/tc_skbedit.h b/include/net/tc_act/tc_skbedit.h new file mode 100644 index 00000000000..6abb3ed3ebf --- /dev/null +++ b/include/net/tc_act/tc_skbedit.h @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2008, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + * Author: Alexander Duyck + */ + +#ifndef __NET_TC_SKBEDIT_H +#define __NET_TC_SKBEDIT_H + +#include + +struct tcf_skbedit { + struct tcf_common common; + u32 flags; + u32 priority; + u16 queue_mapping; +}; +#define to_skbedit(pc) \ + container_of(pc, struct tcf_skbedit, common) + +#endif /* __NET_TC_SKBEDIT_H */ diff --git a/net/sched/Kconfig b/net/sched/Kconfig index efaa7a75e7f..6767e54155d 100644 --- a/net/sched/Kconfig +++ b/net/sched/Kconfig @@ -485,6 +485,17 @@ config NET_ACT_SIMP To compile this code as a module, choose M here: the module will be called simple. +config NET_ACT_SKBEDIT + tristate "SKB Editing" + depends on NET_CLS_ACT + ---help--- + Say Y here to change skb priority or queue_mapping settings. + + If unsure, say N. + + To compile this code as a module, choose M here: the + module will be called skbedit. + config NET_CLS_IND bool "Incoming device classification" depends on NET_CLS_U32 || NET_CLS_FW diff --git a/net/sched/Makefile b/net/sched/Makefile index 3d9b953f7f6..e60c9925b26 100644 --- a/net/sched/Makefile +++ b/net/sched/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_NET_ACT_IPT) += act_ipt.o obj-$(CONFIG_NET_ACT_NAT) += act_nat.o obj-$(CONFIG_NET_ACT_PEDIT) += act_pedit.o obj-$(CONFIG_NET_ACT_SIMP) += act_simple.o +obj-$(CONFIG_NET_ACT_SKBEDIT) += act_skbedit.o obj-$(CONFIG_NET_SCH_FIFO) += sch_fifo.o obj-$(CONFIG_NET_SCH_CBQ) += sch_cbq.o obj-$(CONFIG_NET_SCH_HTB) += sch_htb.o diff --git a/net/sched/act_skbedit.c b/net/sched/act_skbedit.c new file mode 100644 index 00000000000..fe9777e77f3 --- /dev/null +++ b/net/sched/act_skbedit.c @@ -0,0 +1,203 @@ +/* + * Copyright (c) 2008, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + * Author: Alexander Duyck + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define SKBEDIT_TAB_MASK 15 +static struct tcf_common *tcf_skbedit_ht[SKBEDIT_TAB_MASK + 1]; +static u32 skbedit_idx_gen; +static DEFINE_RWLOCK(skbedit_lock); + +static struct tcf_hashinfo skbedit_hash_info = { + .htab = tcf_skbedit_ht, + .hmask = SKBEDIT_TAB_MASK, + .lock = &skbedit_lock, +}; + +static int tcf_skbedit(struct sk_buff *skb, struct tc_action *a, + struct tcf_result *res) +{ + struct tcf_skbedit *d = a->priv; + + spin_lock(&d->tcf_lock); + d->tcf_tm.lastuse = jiffies; + d->tcf_bstats.bytes += qdisc_pkt_len(skb); + d->tcf_bstats.packets++; + + if (d->flags & SKBEDIT_F_PRIORITY) + skb->priority = d->priority; + if (d->flags & SKBEDIT_F_QUEUE_MAPPING && + skb->dev->real_num_tx_queues > d->queue_mapping) + skb_set_queue_mapping(skb, d->queue_mapping); + + spin_unlock(&d->tcf_lock); + return d->tcf_action; +} + +static const struct nla_policy skbedit_policy[TCA_SKBEDIT_MAX + 1] = { + [TCA_SKBEDIT_PARMS] = { .len = sizeof(struct tc_skbedit) }, + [TCA_SKBEDIT_PRIORITY] = { .len = sizeof(u32) }, + [TCA_SKBEDIT_QUEUE_MAPPING] = { .len = sizeof(u16) }, +}; + +static int tcf_skbedit_init(struct nlattr *nla, struct nlattr *est, + struct tc_action *a, int ovr, int bind) +{ + struct nlattr *tb[TCA_SKBEDIT_MAX + 1]; + struct tc_skbedit *parm; + struct tcf_skbedit *d; + struct tcf_common *pc; + u32 flags = 0, *priority = NULL; + u16 *queue_mapping = NULL; + int ret = 0, err; + + if (nla == NULL) + return -EINVAL; + + err = nla_parse_nested(tb, TCA_SKBEDIT_MAX, nla, skbedit_policy); + if (err < 0) + return err; + + if (tb[TCA_SKBEDIT_PARMS] == NULL) + return -EINVAL; + + if (tb[TCA_SKBEDIT_PRIORITY] != NULL) { + flags |= SKBEDIT_F_PRIORITY; + priority = nla_data(tb[TCA_SKBEDIT_PRIORITY]); + } + + if (tb[TCA_SKBEDIT_QUEUE_MAPPING] != NULL) { + flags |= SKBEDIT_F_QUEUE_MAPPING; + queue_mapping = nla_data(tb[TCA_SKBEDIT_QUEUE_MAPPING]); + } + if (!flags) + return -EINVAL; + + parm = nla_data(tb[TCA_SKBEDIT_PARMS]); + + pc = tcf_hash_check(parm->index, a, bind, &skbedit_hash_info); + if (!pc) { + pc = tcf_hash_create(parm->index, est, a, sizeof(*d), bind, + &skbedit_idx_gen, &skbedit_hash_info); + if (unlikely(!pc)) + return -ENOMEM; + + d = to_skbedit(pc); + ret = ACT_P_CREATED; + } else { + d = to_skbedit(pc); + if (!ovr) { + tcf_hash_release(pc, bind, &skbedit_hash_info); + return -EEXIST; + } + } + + spin_lock_bh(&d->tcf_lock); + + d->flags = flags; + if (flags & SKBEDIT_F_PRIORITY) + d->priority = *priority; + if (flags & SKBEDIT_F_QUEUE_MAPPING) + d->queue_mapping = *queue_mapping; + d->tcf_action = parm->action; + + spin_unlock_bh(&d->tcf_lock); + + if (ret == ACT_P_CREATED) + tcf_hash_insert(pc, &skbedit_hash_info); + return ret; +} + +static inline int tcf_skbedit_cleanup(struct tc_action *a, int bind) +{ + struct tcf_skbedit *d = a->priv; + + if (d) + return tcf_hash_release(&d->common, bind, &skbedit_hash_info); + return 0; +} + +static inline int tcf_skbedit_dump(struct sk_buff *skb, struct tc_action *a, + int bind, int ref) +{ + unsigned char *b = skb_tail_pointer(skb); + struct tcf_skbedit *d = a->priv; + struct tc_skbedit opt; + struct tcf_t t; + + opt.index = d->tcf_index; + opt.refcnt = d->tcf_refcnt - ref; + opt.bindcnt = d->tcf_bindcnt - bind; + opt.action = d->tcf_action; + NLA_PUT(skb, TCA_SKBEDIT_PARMS, sizeof(opt), &opt); + if (d->flags & SKBEDIT_F_PRIORITY) + NLA_PUT(skb, TCA_SKBEDIT_PRIORITY, sizeof(d->priority), + &d->priority); + if (d->flags & SKBEDIT_F_QUEUE_MAPPING) + NLA_PUT(skb, TCA_SKBEDIT_QUEUE_MAPPING, + sizeof(d->queue_mapping), &d->queue_mapping); + t.install = jiffies_to_clock_t(jiffies - d->tcf_tm.install); + t.lastuse = jiffies_to_clock_t(jiffies - d->tcf_tm.lastuse); + t.expires = jiffies_to_clock_t(d->tcf_tm.expires); + NLA_PUT(skb, TCA_SKBEDIT_TM, sizeof(t), &t); + return skb->len; + +nla_put_failure: + nlmsg_trim(skb, b); + return -1; +} + +static struct tc_action_ops act_skbedit_ops = { + .kind = "skbedit", + .hinfo = &skbedit_hash_info, + .type = TCA_ACT_SKBEDIT, + .capab = TCA_CAP_NONE, + .owner = THIS_MODULE, + .act = tcf_skbedit, + .dump = tcf_skbedit_dump, + .cleanup = tcf_skbedit_cleanup, + .init = tcf_skbedit_init, + .walk = tcf_generic_walker, +}; + +MODULE_AUTHOR("Alexander Duyck, "); +MODULE_DESCRIPTION("SKB Editing"); +MODULE_LICENSE("GPL"); + +static int __init skbedit_init_module(void) +{ + return tcf_register_action(&act_skbedit_ops); +} + +static void __exit skbedit_cleanup_module(void) +{ + tcf_unregister_action(&act_skbedit_ops); +} + +module_init(skbedit_init_module); +module_exit(skbedit_cleanup_module); -- cgit v1.2.3-70-g09d2 From 67333bb5679325db310bb612c1de3e6e47bb0043 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 12 Sep 2008 17:56:50 -0700 Subject: skbedit: Fix a typo in the documentation Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- Documentation/networking/multiqueue.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/networking/multiqueue.txt b/Documentation/networking/multiqueue.txt index 10113ffa807..8c2b06b77f6 100644 --- a/Documentation/networking/multiqueue.txt +++ b/Documentation/networking/multiqueue.txt @@ -68,7 +68,7 @@ the default simple_tx_hash or a custom netdev->select_queue() defined. The behavior of tc filters remains the same. However a new tc action, skbedit, has been added. Assuming you wanted to route all traffic to a -specific host, for example 192.168.0.3, though a specific queue you could use +specific host, for example 192.168.0.3, through a specific queue you could use this action and establish a filter such as: tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \ -- cgit v1.2.3-70-g09d2 From f07d1501292b3b0d3276ee0e537005526a45e242 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 12 Sep 2008 17:57:23 -0700 Subject: multiq: Further multiqueue cleanup This patch resolves a few issues found with multiq including wording suggestions and a problem seen in the allocation of queues. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- Documentation/networking/multiqueue.txt | 14 +++++++------- net/sched/sch_multiq.c | 13 +++++++++---- 2 files changed, 16 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/multiqueue.txt b/Documentation/networking/multiqueue.txt index 8c2b06b77f6..4caa0e314cc 100644 --- a/Documentation/networking/multiqueue.txt +++ b/Documentation/networking/multiqueue.txt @@ -29,15 +29,15 @@ Section 2: Qdisc support for multiqueue devices ----------------------------------------------- -Currently two qdiscs support multiqueue devices. The first is the default -pfifo_fast qdisc. This qdisc supports one qdisc per hardware queue. A new -round-robin qdisc, sch_multiq also supports multiple hardware queues. The +Currently two qdiscs are optimized for multiqueue devices. The first is the +default pfifo_fast qdisc. This qdisc supports one qdisc per hardware queue. +A new round-robin qdisc, sch_multiq also supports multiple hardware queues. The qdisc is responsible for classifying the skb's and then directing the skb's to bands and queues based on the value in skb->queue_mapping. Use this field in the base driver to determine which queue to send the skb to. -sch_multiq has been added for hardware that wishes to avoid unnecessary -requeuing. It will cycle though the bands and verify that the hardware queue +sch_multiq has been added for hardware that wishes to avoid head-of-line +blocking. It will cycle though the bands and verify that the hardware queue associated with the band is not stopped prior to dequeuing a packet. On qdisc load, the number of bands is based on the number of queues on the @@ -63,8 +63,8 @@ band 1 => queue 1 band 2 => queue 2 band 3 => queue 3 -Traffic will begin flowing through each queue if your base device has either -the default simple_tx_hash or a custom netdev->select_queue() defined. +Traffic will begin flowing through each queue based on either the simple_tx_hash +function or based on netdev->select_queue() if you have it defined. The behavior of tc filters remains the same. However a new tc action, skbedit, has been added. Assuming you wanted to route all traffic to a diff --git a/net/sched/sch_multiq.c b/net/sched/sch_multiq.c index 49a8b67ed3b..5d9cd68e91d 100644 --- a/net/sched/sch_multiq.c +++ b/net/sched/sch_multiq.c @@ -214,8 +214,8 @@ static int multiq_tune(struct Qdisc *sch, struct nlattr *opt) sch_tree_lock(sch); q->bands = qopt->bands; for (i = q->bands; i < q->max_bands; i++) { - struct Qdisc *child = xchg(&q->queues[i], &noop_qdisc); - if (child != &noop_qdisc) { + if (q->queues[i] != &noop_qdisc) { + struct Qdisc *child = xchg(&q->queues[i], &noop_qdisc); qdisc_tree_decrease_qlen(child, child->q.qlen); qdisc_destroy(child); } @@ -250,7 +250,7 @@ static int multiq_tune(struct Qdisc *sch, struct nlattr *opt) static int multiq_init(struct Qdisc *sch, struct nlattr *opt) { struct multiq_sched_data *q = qdisc_priv(sch); - int i; + int i, err; q->queues = NULL; @@ -265,7 +265,12 @@ static int multiq_init(struct Qdisc *sch, struct nlattr *opt) for (i = 0; i < q->max_bands; i++) q->queues[i] = &noop_qdisc; - return multiq_tune(sch, opt); + err = multiq_tune(sch,opt); + + if (err) + kfree(q->queues); + + return err; } static int multiq_dump(struct Qdisc *sch, struct sk_buff *skb) -- cgit v1.2.3-70-g09d2 From 024994310e10cd7632f43b6873558820308c1af1 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sat, 13 Sep 2008 02:33:09 -0700 Subject: cpuset: hotplug documentation fix If all the cpus in a cpuset are offlined, the tasks in it will be moved to the nearest ancestor with non-empty cpus. Signed-off-by: Li Zefan Acked-by: Paul Jackson Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cpusets.txt | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index 1f5a924d1e5..47e568a9370 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -635,14 +635,16 @@ prior 'mems' setting, will not be moved. There is an exception to the above. If hotplug functionality is used to remove all the CPUs that are currently assigned to a cpuset, -then the kernel will automatically update the cpus_allowed of all -tasks attached to CPUs in that cpuset to allow all CPUs. When memory -hotplug functionality for removing Memory Nodes is available, a -similar exception is expected to apply there as well. In general, -the kernel prefers to violate cpuset placement, over starving a task -that has had all its allowed CPUs or Memory Nodes taken offline. User -code should reconfigure cpusets to only refer to online CPUs and Memory -Nodes when using hotplug to add or remove such resources. +then all the tasks in that cpuset will be moved to the nearest ancestor +with non-empty cpus. But the moving of some (or all) tasks might fail if +cpuset is bound with another cgroup subsystem which has some restrictions +on task attaching. In this failing case, those tasks will stay +in the original cpuset, and the kernel will automatically update +their cpus_allowed to allow all online CPUs. When memory hotplug +functionality for removing Memory Nodes is available, a similar exception +is expected to apply there as well. In general, the kernel prefers to +violate cpuset placement, over starving a task that has had all +its allowed CPUs or Memory Nodes taken offline. There is a second exception to the above. GFP_ATOMIC requests are kernel internal allocations that must be satisfied, immediately. -- cgit v1.2.3-70-g09d2 From b261dfea48e81636516f4fa653667097638a8a62 Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Sat, 13 Sep 2008 02:33:10 -0700 Subject: coredump_filter: add description of bit 4 There is no description of bit 4 of coredump_filter in the documentation. This patch adds it. Signed-off-by: Hidehiro Kawai Cc: Roland McGrath Cc: Mel Gorman Acked-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 394eb2cc1c3..f566ad9bcb7 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -2413,6 +2413,8 @@ The following 4 memory types are supported: - (bit 1) anonymous shared memory - (bit 2) file-backed private memory - (bit 3) file-backed shared memory + - (bit 4) ELF header pages in file-backed private memory areas (it is + effective only if the bit 2 is cleared) Note that MMIO pages such as frame buffer are never dumped and vDSO pages are always dumped regardless of the bitmask status. -- cgit v1.2.3-70-g09d2 From 9f986a8cdf94a5855201cf67db6ffdf926bc4cd9 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 13 Sep 2008 02:33:20 -0700 Subject: Documentation/ABI: /sys/class/gpio Provide summary ABI docs about the /sys/class/gpio files. Signed-off-by: David Brownell Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-gpio | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-gpio (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-gpio b/Documentation/ABI/testing/sysfs-gpio new file mode 100644 index 00000000000..8aab8092ad3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-gpio @@ -0,0 +1,26 @@ +What: /sys/class/gpio/ +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Brownell +Description: + + As a Kconfig option, individual GPIO signals may be accessed from + userspace. GPIOs are only made available to userspace by an explicit + "export" operation. If a given GPIO is not claimed for use by + kernel code, it may be exported by userspace (and unexported later). + Kernel code may export it for complete or partial access. + + GPIOs are identified as they are inside the kernel, using integers in + the range 0..INT_MAX. See Documentation/gpio.txt for more information. + + /sys/class/gpio + /export ... asks the kernel to export a GPIO to userspace + /unexport ... to return a GPIO to the kernel + /gpioN ... for each exported GPIO #N + /value ... always readable, writes fail for input GPIOs + /direction ... r/w as: in, out (default low); write: high, low + /gpiochipN ... for each gpiochip; #N is its first GPIO + /base ... (r/o) same as N + /label ... (r/o) descriptive, not necessarily unique + /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1) + -- cgit v1.2.3-70-g09d2 From b2e1b30290539b344cbaff0d9da38012e03aa347 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 9 Sep 2008 23:19:48 -0700 Subject: cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- Documentation/feature-removal-schedule.txt | 18 + Documentation/networking/regulatory.txt | 194 +++++++ include/linux/nl80211.h | 96 +++- include/net/cfg80211.h | 60 +++ include/net/mac80211.h | 2 + include/net/wireless.h | 58 +++ net/mac80211/cfg.c | 7 + net/wireless/Kconfig | 32 ++ net/wireless/core.c | 162 +++++- net/wireless/core.h | 2 +- net/wireless/nl80211.c | 151 ++++++ net/wireless/reg.c | 805 +++++++++++++++++++++++++---- net/wireless/reg.h | 44 ++ 13 files changed, 1513 insertions(+), 118 deletions(-) create mode 100644 Documentation/networking/regulatory.txt create mode 100644 net/wireless/reg.h (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index eb1a47b9742..c93fcdec246 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -6,6 +6,24 @@ be removed from this file. --------------------------- +What: old static regulatory information and ieee80211_regdom module parameter +When: 2.6.29 +Why: The old regulatory infrastructure has been replaced with a new one + which does not require statically defined regulatory domains. We do + not want to keep static regulatory domains in the kernel due to the + the dynamic nature of regulatory law and localization. We kept around + the old static definitions for the regulatory domains of: + * US + * JP + * EU + and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was + set. We also kept around the ieee80211_regdom module parameter in case + some applications were relying on it. Changing regulatory domains + can now be done instead by using nl80211, as is done with iw. +Who: Luis R. Rodriguez + +--------------------------- + What: dev->power.power_state When: July 2007 Why: Broken design for runtime control over driver power states, confusing diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt new file mode 100644 index 00000000000..a96989a8ff3 --- /dev/null +++ b/Documentation/networking/regulatory.txt @@ -0,0 +1,194 @@ +Linux wireless regulatory documentation +--------------------------------------- + +This document gives a brief review over how the Linux wireless +regulatory infrastructure works. + +More up to date information can be obtained at the project's web page: + +http://wireless.kernel.org/en/developers/Regulatory + +Keeping regulatory domains in userspace +--------------------------------------- + +Due to the dynamic nature of regulatory domains we keep them +in userspace and provide a framework for userspace to upload +to the kernel one regulatory domain to be used as the central +core regulatory domain all wireless devices should adhere to. + +How to get regulatory domains to the kernel +------------------------------------------- + +Userspace gets a regulatory domain in the kernel by having +a userspace agent build it and send it via nl80211. Only +expected regulatory domains will be respected by the kernel. + +A currently available userspace agent which can accomplish this +is CRDA - central regulatory domain agent. Its documented here: + +http://wireless.kernel.org/en/developers/Regulatory/CRDA + +Essentially the kernel will send a udev event when it knows +it needs a new regulatory domain. A udev rule can be put in place +to trigger crda to send the respective regulatory domain for a +specific ISO/IEC 3166 alpha2. + +Below is an example udev rule which can be used: + +# Example file, should be put in /etc/udev/rules.d/regulatory.rules +KERNEL=="regulatory*", ACTION=="change", SUBSYSTEM=="platform", RUN+="/sbin/crda" + +The alpha2 is passed as an environment variable under the variable COUNTRY. + +Who asks for regulatory domains? +-------------------------------- + +* Users + +Users can use iw: + +http://wireless.kernel.org/en/users/Documentation/iw + +An example: + + # set regulatory domain to "Costa Rica" + iw reg set CR + +This will request the kernel to set the regulatory domain to +the specificied alpha2. The kernel in turn will then ask userspace +to provide a regulatory domain for the alpha2 specified by the user +by sending a uevent. + +* Wireless subsystems for Country Information elements + +The kernel will send a uevent to inform userspace a new +regulatory domain is required. More on this to be added +as its integration is added. + +* Drivers + +If drivers determine they need a specific regulatory domain +set they can inform the wireless core using regulatory_hint(). +They have two options -- they either provide an alpha2 so that +crda can provide back a regulatory domain for that country or +they can build their own regulatory domain based on internal +custom knowledge so the wireless core can respect it. + +*Most* drivers will rely on the first mechanism of providing a +regulatory hint with an alpha2. For these drivers there is an additional +check that can be used to ensure compliance based on custom EEPROM +regulatory data. This additional check can be used by drivers by +registering on its struct wiphy a reg_notifier() callback. This notifier +is called when the core's regulatory domain has been changed. The driver +can use this to review the changes made and also review who made them +(driver, user, country IE) and determine what to allow based on its +internal EEPROM data. Devices drivers wishing to be capable of world +roaming should use this callback. More on world roaming will be +added to this document when its support is enabled. + +Device drivers who provide their own built regulatory domain +do not need a callback as the channels registered by them are +the only ones that will be allowed and therefore *additional* +cannels cannot be enabled. + +Example code - drivers hinting an alpha2: +------------------------------------------ + +This example comes from the zd1211rw device driver. You can start +by having a mapping of your device's EEPROM country/regulatory +domain value to to a specific alpha2 as follows: + +static struct zd_reg_alpha2_map reg_alpha2_map[] = { + { ZD_REGDOMAIN_FCC, "US" }, + { ZD_REGDOMAIN_IC, "CA" }, + { ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */ + { ZD_REGDOMAIN_JAPAN, "JP" }, + { ZD_REGDOMAIN_JAPAN_ADD, "JP" }, + { ZD_REGDOMAIN_SPAIN, "ES" }, + { ZD_REGDOMAIN_FRANCE, "FR" }, + +Then you can define a routine to map your read EEPROM value to an alpha2, +as follows: + +static int zd_reg2alpha2(u8 regdomain, char *alpha2) +{ + unsigned int i; + struct zd_reg_alpha2_map *reg_map; + for (i = 0; i < ARRAY_SIZE(reg_alpha2_map); i++) { + reg_map = ®_alpha2_map[i]; + if (regdomain == reg_map->reg) { + alpha2[0] = reg_map->alpha2[0]; + alpha2[1] = reg_map->alpha2[1]; + return 0; + } + } + return 1; +} + +Lastly, you can then hint to the core of your discovered alpha2, if a match +was found. You need to do this after you have registered your wiphy. You +are expected to do this during initialization. + + r = zd_reg2alpha2(mac->regdomain, alpha2); + if (!r) + regulatory_hint(hw->wiphy, alpha2, NULL); + +Example code - drivers providing a built in regulatory domain: +-------------------------------------------------------------- + +If you have regulatory information you can obtain from your +driver and you *need* to use this we let you build a regulatory domain +structure and pass it to the wireless core. To do this you should +kmalloc() a structure big enough to hold your regulatory domain +structure and you should then fill it with your data. Finally you simply +call regulatory_hint() with the regulatory domain structure in it. + +Bellow is a simple example, with a regulatory domain cached using the stack. +Your implementation may vary (read EEPROM cache instead, for example). + +Example cache of some regulatory domain + +struct ieee80211_regdomain mydriver_jp_regdom = { + .n_reg_rules = 3, + .alpha2 = "JP", + //.alpha2 = "99", /* If I have no alpha2 to map it to */ + .reg_rules = { + /* IEEE 802.11b/g, channels 1..14 */ + REG_RULE(2412-20, 2484+20, 40, 6, 20, 0), + /* IEEE 802.11a, channels 34..48 */ + REG_RULE(5170-20, 5240+20, 40, 6, 20, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channels 52..64 */ + REG_RULE(5260-20, 5320+20, 40, 6, 20, + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + } +}; + +Then in some part of your code after your wiphy has been registered: + + int r; + struct ieee80211_regdomain *rd; + int size_of_regd; + int num_rules = mydriver_jp_regdom.n_reg_rules; + unsigned int i; + + size_of_regd = sizeof(struct ieee80211_regdomain) + + (num_rules * sizeof(struct ieee80211_reg_rule)); + + rd = kzalloc(size_of_regd, GFP_KERNEL); + if (!rd) + return -ENOMEM; + + memcpy(rd, &mydriver_jp_regdom, sizeof(struct ieee80211_regdomain)); + + for (i=0; i < num_rules; i++) { + memcpy(&rd->reg_rules[i], &mydriver_jp_regdom.reg_rules[i], + sizeof(struct ieee80211_reg_rule)); + } + r = regulatory_hint(hw->wiphy, NULL, rd); + if (r) { + kfree(rd); + return r; + } + diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 5e51f4e7600..9bad65400fb 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -92,6 +92,20 @@ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by * %NL80211_ATTR_IFINDEX. * + * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command + * after being queried by the kernel. CRDA replies by sending a regulatory + * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our + * current alpha2 if it found a match. It also provides + * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each + * regulatory rule is a nested set of attributes given by + * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and + * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by + * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and + * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. + * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain + * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will + * store this as a valid request and then query userspace for it. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -131,7 +145,10 @@ enum nl80211_commands { NL80211_CMD_SET_BSS, - /* add commands here */ + NL80211_CMD_SET_REG, + NL80211_CMD_REQ_SET_REG, + + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ __NL80211_CMD_AFTER_LAST, @@ -197,10 +214,21 @@ enum nl80211_commands { * info given for %NL80211_CMD_GET_MPATH, nested attribute described at * &enum nl80211_mpath_info. * - * * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of * &enum nl80211_mntr_flags. * + * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the + * current regulatory domain should be set to or is already set to. + * For example, 'CR', for Costa Rica. This attribute is used by the kernel + * to query the CRDA to retrieve one regulatory domain. This attribute can + * also be used by userspace to query the kernel for the currently set + * regulatory domain. We chose an alpha2 as that is also used by the + * IEEE-802.11d country information element to identify a country. + * Users can also simply ask the wireless core to set regulatory domain + * to a specific alpha2. + * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory + * rules. + * * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled * (u8, 0 or 1) @@ -265,6 +293,9 @@ enum nl80211_attrs { NL80211_ATTR_SUPPORTED_IFTYPES, + NL80211_ATTR_REG_ALPHA2, + NL80211_ATTR_REG_RULES, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -278,6 +309,7 @@ enum nl80211_attrs { #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY #define NL80211_MAX_SUPP_RATES 32 +#define NL80211_MAX_SUPP_REG_RULES 32 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 @@ -472,6 +504,66 @@ enum nl80211_bitrate_attr { NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 }; +/** + * enum nl80211_reg_rule_attr - regulatory rule attributes + * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional + * considerations for a given frequency range. These are the + * &enum nl80211_reg_rule_flags. + * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory + * rule in KHz. This is not a center of frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this + * frequency range, in KHz. + * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. + * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for + * a given frequency range. The value is in mBm (100 * dBm). + */ +enum nl80211_reg_rule_attr { + __NL80211_REG_RULE_ATTR_INVALID, + NL80211_ATTR_REG_RULE_FLAGS, + + NL80211_ATTR_FREQ_RANGE_START, + NL80211_ATTR_FREQ_RANGE_END, + NL80211_ATTR_FREQ_RANGE_MAX_BW, + + NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, + NL80211_ATTR_POWER_RULE_MAX_EIRP, + + /* keep last */ + __NL80211_REG_RULE_ATTR_AFTER_LAST, + NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_reg_rule_flags - regulatory rule flags + * + * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed + * @NL80211_RRF_NO_CCK: CCK modulation not allowed + * @NL80211_RRF_NO_INDOOR: indoor operation not allowed + * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed + * @NL80211_RRF_DFS: DFS support is required to be used + * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links + * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links + * @NL80211_RRF_PASSIVE_SCAN: passive scan is required + * @NL80211_RRF_NO_IBSS: no IBSS is allowed + */ +enum nl80211_reg_rule_flags { + NL80211_RRF_NO_OFDM = 1<<0, + NL80211_RRF_NO_CCK = 1<<1, + NL80211_RRF_NO_INDOOR = 1<<2, + NL80211_RRF_NO_OUTDOOR = 1<<3, + NL80211_RRF_DFS = 1<<4, + NL80211_RRF_PTP_ONLY = 1<<5, + NL80211_RRF_PTMP_ONLY = 1<<6, + NL80211_RRF_PASSIVE_SCAN = 1<<7, + NL80211_RRF_NO_IBSS = 1<<8, +}; + /** * enum nl80211_mntr_flags - monitor configuration flags * diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 0a72d1e3d3a..9f40c4d417d 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -287,6 +287,66 @@ struct bss_parameters { int use_short_slot_time; }; +/** + * enum reg_set_by - Indicates who is trying to set the regulatory domain + * @REGDOM_SET_BY_INIT: regulatory domain was set by initialization. We will be + * using a static world regulatory domain by default. + * @REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world regulatory domain. + * @REGDOM_SET_BY_USER: User asked the wireless core to set the + * regulatory domain. + * @REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the wireless core + * it thinks its knows the regulatory domain we should be in. + * @REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an 802.11 country + * information element with regulatory information it thinks we + * should consider. + */ +enum reg_set_by { + REGDOM_SET_BY_INIT, + REGDOM_SET_BY_CORE, + REGDOM_SET_BY_USER, + REGDOM_SET_BY_DRIVER, + REGDOM_SET_BY_COUNTRY_IE, +}; + +struct ieee80211_freq_range { + u32 start_freq_khz; + u32 end_freq_khz; + u32 max_bandwidth_khz; +}; + +struct ieee80211_power_rule { + u32 max_antenna_gain; + u32 max_eirp; +}; + +struct ieee80211_reg_rule { + struct ieee80211_freq_range freq_range; + struct ieee80211_power_rule power_rule; + u32 flags; +}; + +struct ieee80211_regdomain { + u32 n_reg_rules; + char alpha2[2]; + struct ieee80211_reg_rule reg_rules[]; +}; + +#define MHZ_TO_KHZ(freq) (freq * 1000) +#define KHZ_TO_MHZ(freq) (freq / 1000) +#define DBI_TO_MBI(gain) (gain * 100) +#define MBI_TO_DBI(gain) (gain / 100) +#define DBM_TO_MBM(gain) (gain * 100) +#define MBM_TO_DBM(gain) (gain / 100) + +#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \ + .freq_range.start_freq_khz = (start) * 1000, \ + .freq_range.end_freq_khz = (end) * 1000, \ + .freq_range.max_bandwidth_khz = (bw) * 1000, \ + .power_rule.max_antenna_gain = (gain) * 100, \ + .power_rule.max_eirp = (eirp) * 100, \ + .flags = reg_flags, \ + } + /* from net/wireless.h */ struct wiphy; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index fb9e62211c3..f504e3eca7d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -833,6 +833,8 @@ struct ieee80211_hw { s8 max_signal; }; +struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy); + /** * SET_IEEE80211_DEV - set device for 802.11 hardware * diff --git a/include/net/wireless.h b/include/net/wireless.h index 1dc8ec3daa2..e4378cc6bf8 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -60,6 +60,7 @@ enum ieee80211_channel_flags { * with cfg80211. * * @center_freq: center frequency in MHz + * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz * @hw_value: hardware-specific value for the channel * @flags: channel flags from &enum ieee80211_channel_flags. * @orig_flags: channel flags at registration time, used by regulatory @@ -73,6 +74,7 @@ enum ieee80211_channel_flags { struct ieee80211_channel { enum ieee80211_band band; u16 center_freq; + u8 max_bandwidth; u16 hw_value; u32 flags; int max_antenna_gain; @@ -178,6 +180,7 @@ struct ieee80211_supported_band { * struct wiphy - wireless hardware description * @idx: the wiphy index assigned to this item * @class_dev: the class device representing /sys/class/ieee80211/ + * @reg_notifier: the driver's regulatory notification callback */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -197,6 +200,9 @@ struct wiphy { struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; + /* Lets us get back the wiphy on the callback */ + int (*reg_notifier)(struct wiphy *wiphy, enum reg_set_by setby); + /* fields below are read-only, assigned by cfg80211 */ /* the item in /sys/class/ieee80211/ points to this, @@ -322,6 +328,58 @@ extern int ieee80211_frequency_to_channel(int freq); */ extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, int freq); +/** + * __regulatory_hint - hint to the wireless core a regulatory domain + * @wiphy: if a driver is providing the hint this is the driver's very + * own &struct wiphy + * @alpha2: the ISO/IEC 3166 alpha2 being claimed the regulatory domain + * should be in. If @rd is set this should be NULL + * @rd: a complete regulatory domain, if passed the caller need not worry + * about freeing it + * + * The Wireless subsystem can use this function to hint to the wireless core + * what it believes should be the current regulatory domain by + * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory + * domain should be in or by providing a completely build regulatory domain. + * + * Returns -EALREADY if *a regulatory domain* has already been set. Note that + * this could be by another driver. It is safe for drivers to continue if + * -EALREADY is returned, if drivers are not capable of world roaming they + * should not register more channels than they support. Right now we only + * support listening to the first driver hint. If the driver is capable + * of world roaming but wants to respect its own EEPROM mappings for + * specific regulatory domains it should register the @reg_notifier callback + * on the &struct wiphy. Returns 0 if the hint went through fine or through an + * intersection operation. Otherwise a standard error code is returned. + * + */ +extern int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, + const char *alpha2, struct ieee80211_regdomain *rd); +/** + * regulatory_hint - driver hint to the wireless core a regulatory domain + * @wiphy: the driver's very own &struct wiphy + * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain + * should be in. If @rd is set this should be NULL. Note that if you + * set this to NULL you should still set rd->alpha2 to some accepted + * alpha2. + * @rd: a complete regulatory domain provided by the driver. If passed + * the driver does not need to worry about freeing it. + * + * Wireless drivers can use this function to hint to the wireless core + * what it believes should be the current regulatory domain by + * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory + * domain should be in or by providing a completely build regulatory domain. + * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried + * for a regulatory domain structure for the respective country. If + * a regulatory domain is build and passed you should set the alpha2 + * if possible, otherwise set it to the special value of "99" which tells + * the wireless core it is unknown. If you pass a built regulatory domain + * and we return non zero you are in charge of kfree()'ing the structure. + * + * See __regulatory_hint() documentation for possible return values. + */ +extern int regulatory_hint(struct wiphy *wiphy, + const char *alpha2, struct ieee80211_regdomain *rd); /** * ieee80211_get_channel - get channel struct from wiphy for specified frequency diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 928813ce08e..5a3bdaad6c1 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -17,6 +17,13 @@ #include "rate.h" #include "mesh.h" +struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy) +{ + struct ieee80211_local *local = wiphy_priv(wiphy); + return &local->hw; +} +EXPORT_SYMBOL(wiphy_to_hw); + static enum ieee80211_if_types nl80211_type_to_mac80211_type(enum nl80211_iftype type) { diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig index 833b024f8f6..b97bd9fe6b7 100644 --- a/net/wireless/Kconfig +++ b/net/wireless/Kconfig @@ -14,6 +14,38 @@ config NL80211 If unsure, say Y. +config WIRELESS_OLD_REGULATORY + bool "Old wireless static regulatory defintions" + default n + ---help--- + This option enables the old static regulatory information + and uses it within the new framework. This is available + temporarily as an option to help prevent immediate issues + due to the switch to the new regulatory framework which + does require a new userspace application which has the + database of regulatory information (CRDA) and another for + setting regulatory domains (iw). + + For more information see: + + http://wireless.kernel.org/en/developers/Regulatory/CRDA + http://wireless.kernel.org/en/users/Documentation/iw + + It is important to note though that if you *do* have CRDA present + and if this option is enabled CRDA *will* be called to update the + regulatory domain (for US and JP only). Support for letting the user + set the regulatory domain through iw is also supported. This option + mainly exists to leave around for a kernel release some old static + regulatory domains that were defined and to keep around the old + ieee80211_regdom module parameter. This is being phased out and you + should stop using them ASAP. + + Say N unless you cannot install a new userspace application + or have one currently depending on the ieee80211_regdom module + parameter and cannot port it to use the new userspace interfaces. + + This is scheduled for removal for 2.6.29. + config WIRELESS_EXT bool "Wireless extensions" default n diff --git a/net/wireless/core.c b/net/wireless/core.c index 7e995ac06a0..a910cd2d0fd 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -13,12 +13,14 @@ #include #include #include +#include #include #include #include #include "nl80211.h" #include "core.h" #include "sysfs.h" +#include "reg.h" /* name for sysfs, %d is appended */ #define PHY_NAME "phy" @@ -27,6 +29,107 @@ MODULE_AUTHOR("Johannes Berg"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("wireless configuration support"); +struct list_head regulatory_requests; + +/* Central wireless core regulatory domains, we only need two, + * the current one and a world regulatory domain in case we have no + * information to give us an alpha2 */ +struct ieee80211_regdomain *cfg80211_regdomain; + +/* We keep a static world regulatory domain in case of the absence of CRDA */ +const struct ieee80211_regdomain world_regdom = { + .n_reg_rules = 1, + .alpha2 = "00", + .reg_rules = { + REG_RULE(2402, 2472, 40, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS), + } +}; + +#ifdef CONFIG_WIRELESS_OLD_REGULATORY +/* All this fucking static junk will be removed soon, so + * don't fucking count on it !@#$ */ + +static char *ieee80211_regdom = "US"; +module_param(ieee80211_regdom, charp, 0444); +MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); + +/* We assume 40 MHz bandwidth for the old regulatory work. + * We make emphasis we are using the exact same frequencies + * as before */ + +const struct ieee80211_regdomain us_regdom = { + .n_reg_rules = 6, + .alpha2 = "US", + .reg_rules = { + /* IEEE 802.11b/g, channels 1..11 */ + REG_RULE(2412-20, 2462+20, 40, 6, 27, 0), + /* IEEE 802.11a, channel 36 */ + REG_RULE(5180-20, 5180+20, 40, 6, 23, 0), + /* IEEE 802.11a, channel 40 */ + REG_RULE(5200-20, 5200+20, 40, 6, 23, 0), + /* IEEE 802.11a, channel 44 */ + REG_RULE(5220-20, 5220+20, 40, 6, 23, 0), + /* IEEE 802.11a, channels 48..64 */ + REG_RULE(5240-20, 5320+20, 40, 6, 23, 0), + /* IEEE 802.11a, channels 149..165, outdoor */ + REG_RULE(5745-20, 5825+20, 40, 6, 30, 0), + } +}; + +const struct ieee80211_regdomain jp_regdom = { + .n_reg_rules = 3, + .alpha2 = "JP", + .reg_rules = { + /* IEEE 802.11b/g, channels 1..14 */ + REG_RULE(2412-20, 2484+20, 40, 6, 20, 0), + /* IEEE 802.11a, channels 34..48 */ + REG_RULE(5170-20, 5240+20, 40, 6, 20, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channels 52..64 */ + REG_RULE(5260-20, 5320+20, 40, 6, 20, + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + } +}; + +const struct ieee80211_regdomain eu_regdom = { + .n_reg_rules = 6, + /* This alpha2 is bogus, we leave it here just for stupid + * backward compatibility */ + .alpha2 = "EU", + .reg_rules = { + /* IEEE 802.11b/g, channels 1..13 */ + REG_RULE(2412-20, 2472+20, 40, 6, 20, 0), + /* IEEE 802.11a, channel 36 */ + REG_RULE(5180-20, 5180+20, 40, 6, 23, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channel 40 */ + REG_RULE(5200-20, 5200+20, 40, 6, 23, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channel 44 */ + REG_RULE(5220-20, 5220+20, 40, 6, 23, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channels 48..64 */ + REG_RULE(5240-20, 5320+20, 40, 6, 20, + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + /* IEEE 802.11a, channels 100..140 */ + REG_RULE(5500-20, 5700+20, 40, 6, 30, + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + } +}; + +#endif + +struct ieee80211_regdomain *cfg80211_world_regdom = + (struct ieee80211_regdomain *) &world_regdom; + +LIST_HEAD(regulatory_requests); +DEFINE_MUTEX(cfg80211_reg_mutex); + /* RCU might be appropriate here since we usually * only read the list, and that can happen quite * often because we need to do it for each command */ @@ -302,7 +405,9 @@ int wiphy_register(struct wiphy *wiphy) ieee80211_set_bitrate_flags(wiphy); /* set up regulatory info */ - wiphy_update_regulatory(wiphy); + mutex_lock(&cfg80211_reg_mutex); + wiphy_update_regulatory(wiphy, REGDOM_SET_BY_CORE); + mutex_unlock(&cfg80211_reg_mutex); mutex_lock(&cfg80211_drv_mutex); @@ -409,9 +514,35 @@ static struct notifier_block cfg80211_netdev_notifier = { .notifier_call = cfg80211_netdev_notifier_call, }; +#ifdef CONFIG_WIRELESS_OLD_REGULATORY +const struct ieee80211_regdomain *static_regdom(char *alpha2) +{ + if (alpha2[0] == 'U' && alpha2[1] == 'S') + return &us_regdom; + if (alpha2[0] == 'J' && alpha2[1] == 'P') + return &jp_regdom; + if (alpha2[0] == 'E' && alpha2[1] == 'U') + return &eu_regdom; + /* Default, as per the old rules */ + return &us_regdom; +} +#endif + static int cfg80211_init(void) { - int err = wiphy_sysfs_init(); + int err; + +#ifdef CONFIG_WIRELESS_OLD_REGULATORY + cfg80211_regdomain = + (struct ieee80211_regdomain *) static_regdom(ieee80211_regdom); + /* Used during reset_regdomains_static() */ + cfg80211_world_regdom = cfg80211_regdomain; +#else + cfg80211_regdomain = + (struct ieee80211_regdomain *) cfg80211_world_regdom; +#endif + + err = wiphy_sysfs_init(); if (err) goto out_fail_sysfs; @@ -425,8 +556,33 @@ static int cfg80211_init(void) ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL); + err = regulatory_init(); + if (err) + goto out_fail_reg; + +#ifdef CONFIG_WIRELESS_OLD_REGULATORY + printk(KERN_INFO "cfg80211: Using old static regulatory domain:\n"); + print_regdomain_info(cfg80211_regdomain); + /* The old code still requests for a new regdomain and if + * you have CRDA you get it updated, otherwise you get + * stuck with the static values. We ignore "EU" code as + * that is not a valid ISO / IEC 3166 alpha2 */ + if (ieee80211_regdom[0] != 'E' && + ieee80211_regdom[1] != 'U') + err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, + ieee80211_regdom, NULL); +#else + err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00", NULL); + if (err) + printk(KERN_ERR "cfg80211: calling CRDA failed - " + "unable to update world regulatory domain, " + "using static definition\n"); +#endif + return 0; +out_fail_reg: + debugfs_remove(ieee80211_debugfs_dir); out_fail_nl80211: unregister_netdevice_notifier(&cfg80211_netdev_notifier); out_fail_notifier: @@ -434,6 +590,7 @@ out_fail_notifier: out_fail_sysfs: return err; } + subsys_initcall(cfg80211_init); static void cfg80211_exit(void) @@ -442,5 +599,6 @@ static void cfg80211_exit(void) nl80211_exit(); unregister_netdevice_notifier(&cfg80211_netdev_notifier); wiphy_sysfs_exit(); + regulatory_exit(); } module_exit(cfg80211_exit); diff --git a/net/wireless/core.h b/net/wireless/core.h index 7a02c356d63..771cc5cc765 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -79,6 +79,6 @@ extern int cfg80211_dev_rename(struct cfg80211_registered_device *drv, char *newname); void ieee80211_set_bitrate_flags(struct wiphy *wiphy); -void wiphy_update_regulatory(struct wiphy *wiphy); +void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby); #endif /* __NET_WIRELESS_CORE_H */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 77880ba8b61..1221d726ed5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -18,6 +18,7 @@ #include #include "core.h" #include "nl80211.h" +#include "reg.h" /* the netlink family */ static struct genl_family nl80211_fam = { @@ -88,6 +89,9 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = { .len = IEEE80211_MAX_MESH_ID_LEN }, [NL80211_ATTR_MPATH_NEXT_HOP] = { .type = NLA_U32 }, + [NL80211_ATTR_REG_ALPHA2] = { .type = NLA_STRING, .len = 2 }, + [NL80211_ATTR_REG_RULES] = { .type = NLA_NESTED }, + [NL80211_ATTR_BSS_CTS_PROT] = { .type = NLA_U8 }, [NL80211_ATTR_BSS_SHORT_PREAMBLE] = { .type = NLA_U8 }, [NL80211_ATTR_BSS_SHORT_SLOT_TIME] = { .type = NLA_U8 }, @@ -1599,6 +1603,141 @@ static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info) return err; } +static const struct nla_policy + reg_rule_policy[NL80211_REG_RULE_ATTR_MAX + 1] = { + [NL80211_ATTR_REG_RULE_FLAGS] = { .type = NLA_U32 }, + [NL80211_ATTR_FREQ_RANGE_START] = { .type = NLA_U32 }, + [NL80211_ATTR_FREQ_RANGE_END] = { .type = NLA_U32 }, + [NL80211_ATTR_FREQ_RANGE_MAX_BW] = { .type = NLA_U32 }, + [NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN] = { .type = NLA_U32 }, + [NL80211_ATTR_POWER_RULE_MAX_EIRP] = { .type = NLA_U32 }, +}; + +static int parse_reg_rule(struct nlattr *tb[], + struct ieee80211_reg_rule *reg_rule) +{ + struct ieee80211_freq_range *freq_range = ®_rule->freq_range; + struct ieee80211_power_rule *power_rule = ®_rule->power_rule; + + if (!tb[NL80211_ATTR_REG_RULE_FLAGS]) + return -EINVAL; + if (!tb[NL80211_ATTR_FREQ_RANGE_START]) + return -EINVAL; + if (!tb[NL80211_ATTR_FREQ_RANGE_END]) + return -EINVAL; + if (!tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]) + return -EINVAL; + if (!tb[NL80211_ATTR_POWER_RULE_MAX_EIRP]) + return -EINVAL; + + reg_rule->flags = nla_get_u32(tb[NL80211_ATTR_REG_RULE_FLAGS]); + + freq_range->start_freq_khz = + nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_START]); + freq_range->end_freq_khz = + nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_END]); + freq_range->max_bandwidth_khz = + nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]); + + power_rule->max_eirp = + nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_EIRP]); + + if (tb[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN]) + power_rule->max_antenna_gain = + nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN]); + + return 0; +} + +static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) +{ + int r; + char *data = NULL; + + if (!info->attrs[NL80211_ATTR_REG_ALPHA2]) + return -EINVAL; + + data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]); + +#ifdef CONFIG_WIRELESS_OLD_REGULATORY + /* We ignore world regdom requests with the old regdom setup */ + if (is_world_regdom(data)) + return -EINVAL; +#endif + mutex_lock(&cfg80211_drv_mutex); + r = __regulatory_hint(NULL, REGDOM_SET_BY_USER, data, NULL); + mutex_unlock(&cfg80211_drv_mutex); + return r; +} + +static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) +{ + struct nlattr *tb[NL80211_REG_RULE_ATTR_MAX + 1]; + struct nlattr *nl_reg_rule; + char *alpha2 = NULL; + int rem_reg_rules = 0, r = 0; + u32 num_rules = 0, rule_idx = 0, size_of_regd; + struct ieee80211_regdomain *rd = NULL; + + if (!info->attrs[NL80211_ATTR_REG_ALPHA2]) + return -EINVAL; + + if (!info->attrs[NL80211_ATTR_REG_RULES]) + return -EINVAL; + + alpha2 = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]); + + nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES], + rem_reg_rules) { + num_rules++; + if (num_rules > NL80211_MAX_SUPP_REG_RULES) + goto bad_reg; + } + + if (!reg_is_valid_request(alpha2)) + return -EINVAL; + + size_of_regd = sizeof(struct ieee80211_regdomain) + + (num_rules * sizeof(struct ieee80211_reg_rule)); + + rd = kzalloc(size_of_regd, GFP_KERNEL); + if (!rd) + return -ENOMEM; + + rd->n_reg_rules = num_rules; + rd->alpha2[0] = alpha2[0]; + rd->alpha2[1] = alpha2[1]; + + nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES], + rem_reg_rules) { + nla_parse(tb, NL80211_REG_RULE_ATTR_MAX, + nla_data(nl_reg_rule), nla_len(nl_reg_rule), + reg_rule_policy); + r = parse_reg_rule(tb, &rd->reg_rules[rule_idx]); + if (r) + goto bad_reg; + + rule_idx++; + + if (rule_idx > NL80211_MAX_SUPP_REG_RULES) + goto bad_reg; + } + + BUG_ON(rule_idx != num_rules); + + mutex_lock(&cfg80211_drv_mutex); + r = set_regdom(rd); + mutex_unlock(&cfg80211_drv_mutex); + if (r) + goto bad_reg; + + return r; + +bad_reg: + kfree(rd); + return -EINVAL; +} + static struct genl_ops nl80211_ops[] = { { .cmd = NL80211_CMD_GET_WIPHY, @@ -1736,6 +1875,18 @@ static struct genl_ops nl80211_ops[] = { .policy = nl80211_policy, .flags = GENL_ADMIN_PERM, }, + { + .cmd = NL80211_CMD_SET_REG, + .doit = nl80211_set_reg, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + }, + { + .cmd = NL80211_CMD_REQ_SET_REG, + .doit = nl80211_req_set_reg, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + }, }; /* multicast groups */ diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 855bff4b325..592b2e391d4 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2,179 +2,758 @@ * Copyright 2002-2005, Instant802 Networks, Inc. * Copyright 2005-2006, Devicescape Software, Inc. * Copyright 2007 Johannes Berg + * Copyright 2008 Luis R. Rodriguez * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/* - * This regulatory domain control implementation is highly incomplete, it - * only exists for the purpose of not regressing mac80211. - * - * For now, drivers can restrict the set of allowed channels by either - * not registering those channels or setting the IEEE80211_CHAN_DISABLED - * flag; that flag will only be *set* by this code, never *cleared. +/** + * DOC: Wireless regulatory infrastructure * * The usual implementation is for a driver to read a device EEPROM to * determine which regulatory domain it should be operating under, then * looking up the allowable channels in a driver-local table and finally * registering those channels in the wiphy structure. * - * Alternatively, drivers that trust the regulatory domain control here - * will register a complete set of capabilities and the control code - * will restrict the set by setting the IEEE80211_CHAN_* flags. + * Another set of compliance enforcement is for drivers to use their + * own compliance limits which can be stored on the EEPROM. The host + * driver or firmware may ensure these are used. + * + * In addition to all this we provide an extra layer of regulatory + * conformance. For drivers which do not have any regulatory + * information CRDA provides the complete regulatory solution. + * For others it provides a community effort on further restrictions + * to enhance compliance. + * + * Note: When number of rules --> infinity we will not be able to + * index on alpha2 any more, instead we'll probably have to + * rely on some SHA1 checksum of the regdomain for example. + * */ #include +#include +#include +#include +#include #include +#include #include "core.h" +#include "reg.h" -static char *ieee80211_regdom = "US"; -module_param(ieee80211_regdom, charp, 0444); -MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); +/* To trigger userspace events */ +static struct platform_device *reg_pdev; -struct ieee80211_channel_range { - short start_freq; - short end_freq; - int max_power; - int max_antenna_gain; - u32 flags; +/* Keep the ordering from large to small */ +static u32 supported_bandwidths[] = { + MHZ_TO_KHZ(40), + MHZ_TO_KHZ(20), }; -struct ieee80211_regdomain { - const char *code; - const struct ieee80211_channel_range *ranges; - int n_ranges; -}; +bool is_world_regdom(char *alpha2) +{ + if (!alpha2) + return false; + if (alpha2[0] == '0' && alpha2[1] == '0') + return true; + return false; +} -#define RANGE_PWR(_start, _end, _pwr, _ag, _flags) \ - { _start, _end, _pwr, _ag, _flags } +static bool is_alpha2_set(char *alpha2) +{ + if (!alpha2) + return false; + if (alpha2[0] != 0 && alpha2[1] != 0) + return true; + return false; +} +static bool is_alpha_upper(char letter) +{ + /* ASCII A - Z */ + if (letter >= 65 && letter <= 90) + return true; + return false; +} -/* - * Ideally, in the future, these definitions will be loaded from a - * userspace table via some daemon. - */ -static const struct ieee80211_channel_range ieee80211_US_channels[] = { - /* IEEE 802.11b/g, channels 1..11 */ - RANGE_PWR(2412, 2462, 27, 6, 0), - /* IEEE 802.11a, channel 36*/ - RANGE_PWR(5180, 5180, 23, 6, 0), - /* IEEE 802.11a, channel 40*/ - RANGE_PWR(5200, 5200, 23, 6, 0), - /* IEEE 802.11a, channel 44*/ - RANGE_PWR(5220, 5220, 23, 6, 0), - /* IEEE 802.11a, channels 48..64 */ - RANGE_PWR(5240, 5320, 23, 6, 0), - /* IEEE 802.11a, channels 149..165, outdoor */ - RANGE_PWR(5745, 5825, 30, 6, 0), -}; +static bool is_unknown_alpha2(char *alpha2) +{ + if (!alpha2) + return false; + /* Special case where regulatory domain was built by driver + * but a specific alpha2 cannot be determined */ + if (alpha2[0] == '9' && alpha2[1] == '9') + return true; + return false; +} -static const struct ieee80211_channel_range ieee80211_JP_channels[] = { - /* IEEE 802.11b/g, channels 1..14 */ - RANGE_PWR(2412, 2484, 20, 6, 0), - /* IEEE 802.11a, channels 34..48 */ - RANGE_PWR(5170, 5240, 20, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channels 52..64 */ - RANGE_PWR(5260, 5320, 20, 6, IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_RADAR), -}; +static bool is_an_alpha2(char *alpha2) +{ + if (!alpha2) + return false; + if (is_alpha_upper(alpha2[0]) && is_alpha_upper(alpha2[1])) + return true; + return false; +} -static const struct ieee80211_channel_range ieee80211_EU_channels[] = { - /* IEEE 802.11b/g, channels 1..13 */ - RANGE_PWR(2412, 2472, 20, 6, 0), - /* IEEE 802.11a, channel 36*/ - RANGE_PWR(5180, 5180, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channel 40*/ - RANGE_PWR(5200, 5200, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channel 44*/ - RANGE_PWR(5220, 5220, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channels 48..64 */ - RANGE_PWR(5240, 5320, 23, 6, IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_RADAR), - /* IEEE 802.11a, channels 100..140 */ - RANGE_PWR(5500, 5700, 30, 6, IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_RADAR), -}; +static bool alpha2_equal(char *alpha2_x, char *alpha2_y) +{ + if (!alpha2_x || !alpha2_y) + return false; + if (alpha2_x[0] == alpha2_y[0] && + alpha2_x[1] == alpha2_y[1]) + return true; + return false; +} + +static bool regdom_changed(char *alpha2) +{ + if (!cfg80211_regdomain) + return true; + if (alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) + return false; + return true; +} + +/* This lets us keep regulatory code which is updated on a regulatory + * basis in userspace. */ +static int call_crda(const char *alpha2) +{ + char country_env[9 + 2] = "COUNTRY="; + char *envp[] = { + country_env, + NULL + }; + + if (!is_world_regdom((char *) alpha2)) + printk(KERN_INFO "cfg80211: Calling CRDA for country: %c%c\n", + alpha2[0], alpha2[1]); + else +#ifdef CONFIG_WIRELESS_OLD_REGULATORY + return -EINVAL; +#else + printk(KERN_INFO "cfg80211: Calling CRDA to update world " + "regulatory domain\n"); +#endif + + country_env[8] = alpha2[0]; + country_env[9] = alpha2[1]; + + return kobject_uevent_env(®_pdev->dev.kobj, KOBJ_CHANGE, envp); +} + +/* This has the logic which determines when a new request + * should be ignored. */ +static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, + char *alpha2, struct ieee80211_regdomain *rd) +{ + struct regulatory_request *last_request = NULL; -#define REGDOM(_code) \ - { \ - .code = __stringify(_code), \ - .ranges = ieee80211_ ##_code## _channels, \ - .n_ranges = ARRAY_SIZE(ieee80211_ ##_code## _channels), \ + /* All initial requests are respected */ + if (list_empty(®ulatory_requests)) + return 0; + + last_request = list_first_entry(®ulatory_requests, + struct regulatory_request, list); + + switch (set_by) { + case REGDOM_SET_BY_INIT: + return -EINVAL; + case REGDOM_SET_BY_CORE: + /* Always respect new wireless core hints, should only + * come in for updating the world regulatory domain at init + * anyway */ + return 0; + case REGDOM_SET_BY_COUNTRY_IE: + if (last_request->initiator == set_by) { + if (last_request->wiphy != wiphy) { + /* Two cards with two APs claiming different + * different Country IE alpha2s! + * You're special!! */ + if (!alpha2_equal(last_request->alpha2, + cfg80211_regdomain->alpha2)) { + /* XXX: Deal with conflict, consider + * building a new one out of the + * intersection */ + WARN_ON(1); + return -EOPNOTSUPP; + } + return -EALREADY; + } + /* Two consecutive Country IE hints on the same wiphy */ + if (!alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) + return 0; + return -EALREADY; + } + if (WARN_ON(!is_alpha2_set(alpha2) || !is_an_alpha2(alpha2)), + "Invalid Country IE regulatory hint passed " + "to the wireless core\n") + return -EINVAL; + /* We ignore Country IE hints for now, as we haven't yet + * added the dot11MultiDomainCapabilityEnabled flag + * for wiphys */ + return 1; + case REGDOM_SET_BY_DRIVER: + BUG_ON(!wiphy); + if (last_request->initiator == set_by) { + /* Two separate drivers hinting different things, + * this is possible if you have two devices present + * on a system with different EEPROM regulatory + * readings. XXX: Do intersection, we support only + * the first regulatory hint for now */ + if (last_request->wiphy != wiphy) + return -EALREADY; + if (rd) + return -EALREADY; + /* Driver should not be trying to hint different + * regulatory domains! */ + BUG_ON(!alpha2_equal(alpha2, + cfg80211_regdomain->alpha2)); + return -EALREADY; + } + if (last_request->initiator == REGDOM_SET_BY_CORE) + return 0; + /* XXX: Handle intersection, and add the + * dot11MultiDomainCapabilityEnabled flag to wiphy. For now + * we assume the driver has this set to false, following the + * 802.11d dot11MultiDomainCapabilityEnabled documentation */ + if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) + return 0; + return 0; + case REGDOM_SET_BY_USER: + if (last_request->initiator == set_by || + last_request->initiator == REGDOM_SET_BY_CORE) + return 0; + /* Drivers can use their wiphy's reg_notifier() + * to override any information */ + if (last_request->initiator == REGDOM_SET_BY_DRIVER) + return 0; + /* XXX: Handle intersection */ + if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) + return -EOPNOTSUPP; + return 0; + default: + return -EINVAL; } +} -static const struct ieee80211_regdomain ieee80211_regdoms[] = { - REGDOM(US), - REGDOM(JP), - REGDOM(EU), -}; +static bool __reg_is_valid_request(char *alpha2, + struct regulatory_request **request) +{ + struct regulatory_request *req; + if (list_empty(®ulatory_requests)) + return false; + list_for_each_entry(req, ®ulatory_requests, list) { + if (alpha2_equal(req->alpha2, alpha2)) { + *request = req; + return true; + } + } + return false; +} +/* Used by nl80211 before kmalloc'ing our regulatory domain */ +bool reg_is_valid_request(char *alpha2) +{ + struct regulatory_request *request = NULL; + return __reg_is_valid_request(alpha2, &request); +} -static const struct ieee80211_regdomain *get_regdom(void) +/* Sanity check on a regulatory rule */ +static bool is_valid_reg_rule(struct ieee80211_reg_rule *rule) { - static const struct ieee80211_channel_range - ieee80211_world_channels[] = { - /* IEEE 802.11b/g, channels 1..11 */ - RANGE_PWR(2412, 2462, 27, 6, 0), - }; - static const struct ieee80211_regdomain regdom_world = REGDOM(world); - int i; + struct ieee80211_freq_range *freq_range = &rule->freq_range; + u32 freq_diff; + + if (freq_range->start_freq_khz == 0 || freq_range->end_freq_khz == 0) + return false; + + if (freq_range->start_freq_khz > freq_range->end_freq_khz) + return false; + + freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; + + if (freq_range->max_bandwidth_khz > freq_diff) + return false; + + return true; +} + +static bool is_valid_rd(struct ieee80211_regdomain *rd) +{ + struct ieee80211_reg_rule *reg_rule = NULL; + unsigned int i; - for (i = 0; i < ARRAY_SIZE(ieee80211_regdoms); i++) - if (strcmp(ieee80211_regdom, ieee80211_regdoms[i].code) == 0) - return &ieee80211_regdoms[i]; + if (!rd->n_reg_rules) + return false; - return ®dom_world; + for (i = 0; i < rd->n_reg_rules; i++) { + reg_rule = &rd->reg_rules[i]; + if (!is_valid_reg_rule(reg_rule)) + return false; + } + + return true; } +/* Returns value in KHz */ +static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range, + u32 freq) +{ + unsigned int i; + for (i = 0; i < ARRAY_SIZE(supported_bandwidths); i++) { + u32 start_freq_khz = freq - supported_bandwidths[i]/2; + u32 end_freq_khz = freq + supported_bandwidths[i]/2; + if (start_freq_khz >= freq_range->start_freq_khz && + end_freq_khz <= freq_range->end_freq_khz) + return supported_bandwidths[i]; + } + return 0; +} -static void handle_channel(struct ieee80211_channel *chan, - const struct ieee80211_regdomain *rd) +/* XXX: add support for the rest of enum nl80211_reg_rule_flags, we may + * want to just have the channel structure use these */ +static u32 map_regdom_flags(u32 rd_flags) +{ + u32 channel_flags = 0; + if (rd_flags & NL80211_RRF_PASSIVE_SCAN) + channel_flags |= IEEE80211_CHAN_PASSIVE_SCAN; + if (rd_flags & NL80211_RRF_NO_IBSS) + channel_flags |= IEEE80211_CHAN_NO_IBSS; + if (rd_flags & NL80211_RRF_DFS) + channel_flags |= IEEE80211_CHAN_RADAR; + return channel_flags; +} + +/** + * freq_reg_info - get regulatory information for the given frequency + * @center_freq: Frequency in KHz for which we want regulatory information for + * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one + * you can set this to 0. If this frequency is allowed we then set + * this value to the maximum allowed bandwidth. + * @reg_rule: the regulatory rule which we have for this frequency + * + * Use this function to get the regulatory rule for a specific frequency. + */ +static int freq_reg_info(u32 center_freq, u32 *bandwidth, + const struct ieee80211_reg_rule **reg_rule) { int i; - u32 flags = chan->orig_flags; - const struct ieee80211_channel_range *rg = NULL; + u32 max_bandwidth = 0; - for (i = 0; i < rd->n_ranges; i++) { - if (rd->ranges[i].start_freq <= chan->center_freq && - chan->center_freq <= rd->ranges[i].end_freq) { - rg = &rd->ranges[i]; + if (!cfg80211_regdomain) + return -EINVAL; + + for (i = 0; i < cfg80211_regdomain->n_reg_rules; i++) { + const struct ieee80211_reg_rule *rr; + const struct ieee80211_freq_range *fr = NULL; + const struct ieee80211_power_rule *pr = NULL; + + rr = &cfg80211_regdomain->reg_rules[i]; + fr = &rr->freq_range; + pr = &rr->power_rule; + max_bandwidth = freq_max_bandwidth(fr, center_freq); + if (max_bandwidth && *bandwidth <= max_bandwidth) { + *reg_rule = rr; + *bandwidth = max_bandwidth; break; } } - if (!rg) { - /* not found */ + return !max_bandwidth; +} + +static void handle_channel(struct ieee80211_channel *chan) +{ + int r; + u32 flags = chan->orig_flags; + u32 max_bandwidth = 0; + const struct ieee80211_reg_rule *reg_rule = NULL; + const struct ieee80211_power_rule *power_rule = NULL; + + r = freq_reg_info(MHZ_TO_KHZ(chan->center_freq), + &max_bandwidth, ®_rule); + + if (r) { flags |= IEEE80211_CHAN_DISABLED; chan->flags = flags; return; } - chan->flags = flags; + power_rule = ®_rule->power_rule; + + chan->flags = flags | map_regdom_flags(reg_rule->flags); chan->max_antenna_gain = min(chan->orig_mag, - rg->max_antenna_gain); + (int) MBI_TO_DBI(power_rule->max_antenna_gain)); + chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth); if (chan->orig_mpwr) - chan->max_power = min(chan->orig_mpwr, rg->max_power); + chan->max_power = min(chan->orig_mpwr, + (int) MBM_TO_DBM(power_rule->max_eirp)); else - chan->max_power = rg->max_power; + chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); } -static void handle_band(struct ieee80211_supported_band *sband, - const struct ieee80211_regdomain *rd) +static void handle_band(struct ieee80211_supported_band *sband) { int i; for (i = 0; i < sband->n_channels; i++) - handle_channel(&sband->channels[i], rd); + handle_channel(&sband->channels[i]); } -void wiphy_update_regulatory(struct wiphy *wiphy) +static void update_all_wiphy_regulatory(enum reg_set_by setby) { - enum ieee80211_band band; - const struct ieee80211_regdomain *rd = get_regdom(); + struct cfg80211_registered_device *drv; - for (band = 0; band < IEEE80211_NUM_BANDS; band++) + list_for_each_entry(drv, &cfg80211_drv_list, list) + wiphy_update_regulatory(&drv->wiphy, setby); +} + +void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby) +{ + enum ieee80211_band band; + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (wiphy->bands[band]) - handle_band(wiphy->bands[band], rd); + handle_band(wiphy->bands[band]); + if (wiphy->reg_notifier) + wiphy->reg_notifier(wiphy, setby); + } +} + +/* Caller must hold &cfg80211_drv_mutex */ +int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, + const char *alpha2, struct ieee80211_regdomain *rd) +{ + struct regulatory_request *request; + char *rd_alpha2; + int r = 0; + + r = ignore_request(wiphy, set_by, (char *) alpha2, rd); + if (r) + return r; + + if (rd) + rd_alpha2 = rd->alpha2; + else + rd_alpha2 = (char *) alpha2; + + switch (set_by) { + case REGDOM_SET_BY_CORE: + case REGDOM_SET_BY_COUNTRY_IE: + case REGDOM_SET_BY_DRIVER: + case REGDOM_SET_BY_USER: + request = kzalloc(sizeof(struct regulatory_request), + GFP_KERNEL); + if (!request) + return -ENOMEM; + + request->alpha2[0] = rd_alpha2[0]; + request->alpha2[1] = rd_alpha2[1]; + request->initiator = set_by; + request->wiphy = wiphy; + + list_add_tail(&request->list, ®ulatory_requests); + if (rd) + break; + r = call_crda(alpha2); +#ifndef CONFIG_WIRELESS_OLD_REGULATORY + if (r) + printk(KERN_ERR "cfg80211: Failed calling CRDA\n"); +#endif + break; + default: + r = -ENOTSUPP; + break; + } + + return r; +} + +/* If rd is not NULL and if this call fails the caller must free it */ +int regulatory_hint(struct wiphy *wiphy, const char *alpha2, + struct ieee80211_regdomain *rd) +{ + int r; + BUG_ON(!rd && !alpha2); + + mutex_lock(&cfg80211_drv_mutex); + + r = __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2, rd); + if (r || !rd) + goto unlock_and_exit; + + /* If the driver passed a regulatory domain we skipped asking + * userspace for one so we can now go ahead and set it */ + r = set_regdom(rd); + +unlock_and_exit: + mutex_unlock(&cfg80211_drv_mutex); + return r; +} +EXPORT_SYMBOL(regulatory_hint); + + +static void print_rd_rules(struct ieee80211_regdomain *rd) +{ + unsigned int i; + struct ieee80211_reg_rule *reg_rule = NULL; + struct ieee80211_freq_range *freq_range = NULL; + struct ieee80211_power_rule *power_rule = NULL; + + printk(KERN_INFO "\t(start_freq - end_freq @ bandwidth), " + "(max_antenna_gain, max_eirp)\n"); + + for (i = 0; i < rd->n_reg_rules; i++) { + reg_rule = &rd->reg_rules[i]; + freq_range = ®_rule->freq_range; + power_rule = ®_rule->power_rule; + + /* There may not be documentation for max antenna gain + * in certain regions */ + if (power_rule->max_antenna_gain) + printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), " + "(%d mBi, %d mBm)\n", + freq_range->start_freq_khz, + freq_range->end_freq_khz, + freq_range->max_bandwidth_khz, + power_rule->max_antenna_gain, + power_rule->max_eirp); + else + printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), " + "(N/A, %d mBm)\n", + freq_range->start_freq_khz, + freq_range->end_freq_khz, + freq_range->max_bandwidth_khz, + power_rule->max_eirp); + } +} + +static void print_regdomain(struct ieee80211_regdomain *rd) +{ + + if (is_world_regdom(rd->alpha2)) + printk(KERN_INFO "cfg80211: World regulatory " + "domain updated:\n"); + else { + if (is_unknown_alpha2(rd->alpha2)) + printk(KERN_INFO "cfg80211: Regulatory domain " + "changed to driver built-in settings " + "(unknown country)\n"); + else + printk(KERN_INFO "cfg80211: Regulatory domain " + "changed to country: %c%c\n", + rd->alpha2[0], rd->alpha2[1]); + } + print_rd_rules(rd); +} + +void print_regdomain_info(struct ieee80211_regdomain *rd) +{ + printk(KERN_INFO "cfg80211: Regulatory domain: %c%c\n", + rd->alpha2[0], rd->alpha2[1]); + print_rd_rules(rd); +} + +#ifdef CONFIG_WIRELESS_OLD_REGULATORY + +static bool is_old_static_regdom(struct ieee80211_regdomain *rd) +{ + if (rd == &us_regdom || rd == &jp_regdom || rd == &eu_regdom) + return true; + return false; +} + +/* The old crap never deals with a world regulatory domain, it only + * deals with the static regulatory domain passed and if possible + * an updated "US" or "JP" regulatory domain. We do however store the + * old static regulatory domain in cfg80211_world_regdom for convenience + * of use here */ +static void reset_regdomains_static(void) +{ + if (!is_old_static_regdom(cfg80211_regdomain)) + kfree(cfg80211_regdomain); + /* This is setting the regdom to the old static regdom */ + cfg80211_regdomain = + (struct ieee80211_regdomain *) cfg80211_world_regdom; +} +#else +static void reset_regdomains(void) +{ + if (cfg80211_world_regdom && cfg80211_world_regdom != &world_regdom) { + if (cfg80211_world_regdom == cfg80211_regdomain) { + kfree(cfg80211_regdomain); + } else { + kfree(cfg80211_world_regdom); + kfree(cfg80211_regdomain); + } + } else if (cfg80211_regdomain && cfg80211_regdomain != &world_regdom) + kfree(cfg80211_regdomain); + + cfg80211_world_regdom = (struct ieee80211_regdomain *) &world_regdom; + cfg80211_regdomain = NULL; +} + +/* Dynamic world regulatory domain requested by the wireless + * core upon initialization */ +static void update_world_regdomain(struct ieee80211_regdomain *rd) +{ + BUG_ON(list_empty(®ulatory_requests)); + + reset_regdomains(); + + cfg80211_world_regdom = rd; + cfg80211_regdomain = rd; +} +#endif + +static int __set_regdom(struct ieee80211_regdomain *rd) +{ + struct regulatory_request *request = NULL; + + /* Some basic sanity checks first */ + +#ifdef CONFIG_WIRELESS_OLD_REGULATORY + /* We ignore the world regdom with the old static regdomains setup + * as there is no point to it with satic regulatory definitions :( + * Don't worry this shit will be removed soon... */ + if (is_world_regdom(rd->alpha2)) + return -EINVAL; +#else + if (is_world_regdom(rd->alpha2)) { + if (WARN_ON(!__reg_is_valid_request(rd->alpha2, &request))) + return -EINVAL; + update_world_regdomain(rd); + return 0; + } +#endif + + if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) && + !is_unknown_alpha2(rd->alpha2)) + return -EINVAL; + + if (list_empty(®ulatory_requests)) + return -EINVAL; + +#ifdef CONFIG_WIRELESS_OLD_REGULATORY + /* Static "US" and "JP" will be overridden, but just once */ + if (!is_old_static_regdom(cfg80211_regdomain) && + !regdom_changed(rd->alpha2)) + return -EINVAL; +#else + if (!regdom_changed(rd->alpha2)) + return -EINVAL; +#endif + + /* Now lets set the regulatory domain, update all driver channels + * and finally inform them of what we have done, in case they want + * to review or adjust their own settings based on their own + * internal EEPROM data */ + + if (WARN_ON(!__reg_is_valid_request(rd->alpha2, &request))) + return -EINVAL; + +#ifdef CONFIG_WIRELESS_OLD_REGULATORY + reset_regdomains_static(); +#else + reset_regdomains(); +#endif + + /* Country IE parsing coming soon */ + switch (request->initiator) { + case REGDOM_SET_BY_CORE: + case REGDOM_SET_BY_DRIVER: + case REGDOM_SET_BY_USER: + if (!is_valid_rd(rd)) { + printk(KERN_ERR "cfg80211: Invalid " + "regulatory domain detected:\n"); + print_regdomain_info(rd); + return -EINVAL; + } + break; + case REGDOM_SET_BY_COUNTRY_IE: /* Not yet */ + WARN_ON(1); + default: + return -EOPNOTSUPP; + } + + /* Tada! */ + cfg80211_regdomain = rd; + request->granted = 1; + + return 0; +} + + +/* Use this call to set the current regulatory domain. Conflicts with + * multiple drivers can be ironed out later. Caller must've already + * kmalloc'd the rd structure. If this calls fails you should kfree() + * the passed rd. Caller must hold cfg80211_drv_mutex */ +int set_regdom(struct ieee80211_regdomain *rd) +{ + struct regulatory_request *this_request = NULL, *prev_request = NULL; + int r; + + if (!list_empty(®ulatory_requests)) + prev_request = list_first_entry(®ulatory_requests, + struct regulatory_request, list); + + /* Note that this doesn't update the wiphys, this is done below */ + r = __set_regdom(rd); + if (r) + return r; + + BUG_ON((!__reg_is_valid_request(rd->alpha2, &this_request))); + + /* The initial standard core update of the world regulatory domain, no + * need to keep that request info around if it didn't fail. */ + if (is_world_regdom(rd->alpha2) && + this_request->initiator == REGDOM_SET_BY_CORE && + this_request->granted) { + list_del(&this_request->list); + kfree(this_request); + this_request = NULL; + } + + /* Remove old requests, we only leave behind the last one */ + if (prev_request) { + list_del(&prev_request->list); + kfree(prev_request); + prev_request = NULL; + } + + /* This would make this whole thing pointless */ + BUG_ON(rd != cfg80211_regdomain); + + /* update all wiphys now with the new established regulatory domain */ + update_all_wiphy_regulatory(this_request->initiator); + + print_regdomain(rd); + + return r; +} + +int regulatory_init(void) +{ + reg_pdev = platform_device_register_simple("regulatory", 0, NULL, 0); + if (IS_ERR(reg_pdev)) + return PTR_ERR(reg_pdev); + return 0; +} + +void regulatory_exit(void) +{ + struct regulatory_request *req, *req_tmp; + mutex_lock(&cfg80211_drv_mutex); +#ifdef CONFIG_WIRELESS_OLD_REGULATORY + reset_regdomains_static(); +#else + reset_regdomains(); +#endif + list_for_each_entry_safe(req, req_tmp, ®ulatory_requests, list) { + list_del(&req->list); + kfree(req); + } + platform_device_unregister(reg_pdev); + mutex_unlock(&cfg80211_drv_mutex); } diff --git a/net/wireless/reg.h b/net/wireless/reg.h new file mode 100644 index 00000000000..d75fd023297 --- /dev/null +++ b/net/wireless/reg.h @@ -0,0 +1,44 @@ +#ifndef __NET_WIRELESS_REG_H +#define __NET_WIRELESS_REG_H + +extern const struct ieee80211_regdomain world_regdom; +#ifdef CONFIG_WIRELESS_OLD_REGULATORY +extern const struct ieee80211_regdomain us_regdom; +extern const struct ieee80211_regdomain jp_regdom; +extern const struct ieee80211_regdomain eu_regdom; +#endif + +extern struct ieee80211_regdomain *cfg80211_regdomain; +extern struct ieee80211_regdomain *cfg80211_world_regdom; +extern struct list_head regulatory_requests; + +struct regdom_last_setby { + struct wiphy *wiphy; + u8 initiator; +}; + +/* wiphy is set if this request's initiator is REGDOM_SET_BY_DRIVER */ +struct regulatory_request { + struct list_head list; + struct wiphy *wiphy; + int granted; + enum reg_set_by initiator; + char alpha2[2]; +}; + +bool is_world_regdom(char *alpha2); +bool reg_is_valid_request(char *alpha2); + +int set_regdom(struct ieee80211_regdomain *rd); +int __regulatory_hint_alpha2(struct wiphy *wiphy, enum reg_set_by set_by, + const char *alpha2); + +int regulatory_init(void); +void regulatory_exit(void); + +void print_regdomain_info(struct ieee80211_regdomain *); + +/* If a char is A-Z */ +#define IS_ALPHA(letter) (letter >= 65 && letter <= 90) + +#endif /* __NET_WIRELESS_REG_H */ -- cgit v1.2.3-70-g09d2 From bed7aac9416f50425d2200df32bcc9bf248ff8cb Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 26 Aug 2008 11:58:01 -0300 Subject: rfkill: remove transmitter blocking on suspend Currently, rfkill would stand in the way of properly supporting wireless devices that are capable of waking the system up from sleep or hibernation when they receive a special wireless message. It would also get in the way of mesh devices that need to remain operational even during platform suspend. To avoid that, stop trying to block the transmitters on the rfkill class suspend handler. Drivers that need rfkill's older behaviour will have to implement it by themselves in their own suspend handling. Do note that rfkill *will* attempt to restore the transmitter state on resume in any situation. This happens after the driver's resume method is called by the suspend core (class devices resume after the devices they are attached to have been resumed). The following drivers need to check if they need to explicitly block their transmitters in their own suspend handlers (maintainers Cc'd): arch/arm/mach-pxa/tosa-bt.c drivers/net/usb/hso.c drivers/net/wireless/rt2x00/* (USB might need it?) drivers/net/wireless/b43/ (SSB over USB might need it?) drivers/misc/hp-wmi.c eeepc-laptop w/rfkill support (not in mainline yet) Compal laptop w/rfkill support (not in mainline yet) toshiba-acpi w/rfkill support (not in mainline yet) Signed-off-by: Henrique de Moraes Holschuh Cc: Ivo van Doorn Cc: Matthew Garrett Cc: Andrew Bird Cc: Greg Kroah-Hartman Cc: Cezary Jackiewicz Cc: Philip Langdale Signed-off-by: John W. Linville --- Documentation/rfkill.txt | 32 ++++++++++++++++++++++++++++---- net/rfkill/rfkill.c | 16 ++-------------- 2 files changed, 30 insertions(+), 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 6fcb3060dec..b65f0799df4 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -341,6 +341,8 @@ key that does nothing by itself, as well as any hot key that is type-specific 3.1 Guidelines for wireless device drivers ------------------------------------------ +(in this text, rfkill->foo means the foo field of struct rfkill). + 1. Each independent transmitter in a wireless device (usually there is only one transmitter per device) should have a SINGLE rfkill class attached to it. @@ -363,10 +365,32 @@ This rule exists because users of the rfkill subsystem expect to get (and set, when possible) the overall transmitter rfkill state, not of a particular rfkill line. -5. During suspend, the rfkill class will attempt to soft-block the radio -through a call to rfkill->toggle_radio, and will try to restore its previous -state during resume. After a rfkill class is suspended, it will *not* call -rfkill->toggle_radio until it is resumed. +5. The wireless device driver MUST NOT leave the transmitter enabled during +suspend and hibernation unless: + + 5.1. The transmitter has to be enabled for some sort of functionality + like wake-on-wireless-packet or autonomous packed forwarding in a mesh + network, and that functionality is enabled for this suspend/hibernation + cycle. + +AND + + 5.2. The device was not on a user-requested BLOCKED state before + the suspend (i.e. the driver must NOT unblock a device, not even + to support wake-on-wireless-packet or remain in the mesh). + +In other words, there is absolutely no allowed scenario where a driver can +automatically take action to unblock a rfkill controller (obviously, this deals +with scenarios where soft-blocking or both soft and hard blocking is happening. +Scenarios where hardware rfkill lines are the only ones blocking the +transmitter are outside of this rule, since the wireless device driver does not +control its input hardware rfkill lines in the first place). + +6. During resume, rfkill will try to restore its previous state. + +7. After a rfkill class is suspended, it will *not* call rfkill->toggle_radio +until it is resumed. + Example of a WLAN wireless driver connected to the rfkill subsystem: -------------------------------------------------------------------- diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index d5735799ccd..ea0dc04b3c7 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -512,21 +512,9 @@ static void rfkill_release(struct device *dev) #ifdef CONFIG_PM static int rfkill_suspend(struct device *dev, pm_message_t state) { - struct rfkill *rfkill = to_rfkill(dev); - - if (dev->power.power_state.event != state.event) { - if (state.event & PM_EVENT_SLEEP) { - /* Stop transmitter, keep state, no notifies */ - update_rfkill_state(rfkill); - - mutex_lock(&rfkill->mutex); - rfkill->toggle_radio(rfkill->data, - RFKILL_STATE_SOFT_BLOCKED); - mutex_unlock(&rfkill->mutex); - } - + /* mark class device as suspended */ + if (dev->power.power_state.event != state.event) dev->power.power_state = state; - } return 0; } -- cgit v1.2.3-70-g09d2 From 62c1f95e3993480ae451c322588f7cbf5a58db28 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 12 Sep 2008 10:18:44 +0200 Subject: mac80211: clean up kdoc A few errors sneaked in over time, some functions no longer exist, for some alternatives exist. This changes the docbook template to include the right things. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- Documentation/DocBook/mac80211.tmpl | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl index b651e0a4b1c..77c3c202991 100644 --- a/Documentation/DocBook/mac80211.tmpl +++ b/Documentation/DocBook/mac80211.tmpl @@ -145,7 +145,6 @@ usage should require reading the full document. this though and the recommendation to allow only a single interface in STA mode at first! -!Finclude/net/mac80211.h ieee80211_if_types !Finclude/net/mac80211.h ieee80211_if_init_conf !Finclude/net/mac80211.h ieee80211_if_conf @@ -177,8 +176,7 @@ usage should require reading the full document. functions/definitions !Finclude/net/mac80211.h ieee80211_rx_status !Finclude/net/mac80211.h mac80211_rx_flags -!Finclude/net/mac80211.h ieee80211_tx_control -!Finclude/net/mac80211.h ieee80211_tx_status_flags +!Finclude/net/mac80211.h ieee80211_tx_info !Finclude/net/mac80211.h ieee80211_rx !Finclude/net/mac80211.h ieee80211_rx_irqsafe !Finclude/net/mac80211.h ieee80211_tx_status @@ -189,12 +187,11 @@ usage should require reading the full document. !Finclude/net/mac80211.h ieee80211_ctstoself_duration !Finclude/net/mac80211.h ieee80211_generic_frame_duration !Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb -!Finclude/net/mac80211.h ieee80211_get_hdrlen +!Finclude/net/mac80211.h ieee80211_hdrlen !Finclude/net/mac80211.h ieee80211_wake_queue !Finclude/net/mac80211.h ieee80211_stop_queue -!Finclude/net/mac80211.h ieee80211_start_queues -!Finclude/net/mac80211.h ieee80211_stop_queues !Finclude/net/mac80211.h ieee80211_wake_queues +!Finclude/net/mac80211.h ieee80211_stop_queues @@ -230,8 +227,7 @@ usage should require reading the full document. Multiple queues and QoS support TBD !Finclude/net/mac80211.h ieee80211_tx_queue_params -!Finclude/net/mac80211.h ieee80211_tx_queue_stats_data -!Finclude/net/mac80211.h ieee80211_tx_queue +!Finclude/net/mac80211.h ieee80211_tx_queue_stats -- cgit v1.2.3-70-g09d2 From c2fe59444e1827ecd2713a1e6ecfd1ab1fc548ae Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 6 Aug 2008 11:48:25 -0500 Subject: powerpc: add SSI-to-DMA properties to Freescale MPC8610 HPCD device tree Add the fsl,playback-dma and fsl,capture-dma properties to the Freescale MPC8610 HPCD device tree. These properties connect the SSI nodes to the DMA nodes for the DMA channels that the SSI should use. Also update the ssi.txt documentation. These properties will be needed when the ASoC V2 version of the Freescale MPC8610 device drivers are merged into the mainline. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- Documentation/powerpc/dts-bindings/fsl/ssi.txt | 15 +++++++++++++++ arch/powerpc/boot/dts/mpc8610_hpcd.dts | 8 +++++--- 2 files changed, 20 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt index d100555d488..5d9841303ca 100644 --- a/Documentation/powerpc/dts-bindings/fsl/ssi.txt +++ b/Documentation/powerpc/dts-bindings/fsl/ssi.txt @@ -24,6 +24,12 @@ Required properties: "rj-master" - r.j., SSI is clock master "ac97-slave" - AC97 mode, SSI is clock slave "ac97-master" - AC97 mode, SSI is clock master +- fsl,playback-dma: phandle to a DMA node for the DMA channel to use for + playback of audio. This is typically dictated by SOC + design. See the notes below. +- fsl,capture-dma: phandle to a DMA node for the DMA channel to use for + capture (recording) of audio. This is typically dictated + by SOC design. See the notes below. Optional properties: - codec-handle : phandle to a 'codec' node that defines an audio @@ -36,3 +42,12 @@ Child 'codec' node required properties: Child 'codec' node optional properties: - clock-frequency : The frequency of the input clock, which typically comes from an on-board dedicated oscillator. + +Notes on fsl,playback-dma and fsl,capture-dma: + +On SOCs that have an SSI, specific DMA channels are hard-wired for playback +and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for +playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for +playback and DMA channel 3 for capture. The developer can choose which +DMA controller to use, but the channels themselves are hard-wired. The +purpose of these two properties is to represent this hardware design. diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 3b3a1062cb2..0f3a36e0ea6 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -207,7 +207,7 @@ reg = <0xe4000 0x100>; }; - i2s@16000 { + ssi@16000 { compatible = "fsl,mpc8610-ssi"; cell-index = <0>; reg = <0x16000 0x100>; @@ -215,6 +215,8 @@ interrupts = <62 2>; fsl,mode = "i2s-slave"; codec-handle = <&cs4270>; + fsl,playback-dma = <&dma00>; + fsl,capture-dma = <&dma01>; }; ssi@16100 { @@ -233,7 +235,7 @@ reg = <0x21300 0x4>; /* DMA general status register */ ranges = <0x0 0x21100 0x200>; - dma-channel@0 { + dma00: dma-channel@0 { compatible = "fsl,mpc8610-dma-channel", "fsl,eloplus-dma-channel"; cell-index = <0>; @@ -241,7 +243,7 @@ interrupt-parent = <&mpic>; interrupts = <20 2>; }; - dma-channel@1 { + dma01: dma-channel@1 { compatible = "fsl,mpc8610-dma-channel", "fsl,eloplus-dma-channel"; cell-index = <1>; -- cgit v1.2.3-70-g09d2 From c4e84bde1d595d857d3c74b49b9c45cc770df792 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Thu, 18 Sep 2008 11:56:28 -0400 Subject: qlge: New Qlogic 10Gb Ethernet Driver. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- Documentation/networking/LICENSE.qlge | 46 + MAINTAINERS | 7 + drivers/net/Kconfig | 9 + drivers/net/Makefile | 1 + drivers/net/qlge/Makefile | 7 + drivers/net/qlge/qlge.h | 1593 +++++++++++++ drivers/net/qlge/qlge_dbg.c | 858 +++++++ drivers/net/qlge/qlge_ethtool.c | 415 ++++ drivers/net/qlge/qlge_main.c | 3954 +++++++++++++++++++++++++++++++++ drivers/net/qlge/qlge_mpi.c | 150 ++ 10 files changed, 7040 insertions(+) create mode 100644 Documentation/networking/LICENSE.qlge create mode 100644 drivers/net/qlge/Makefile create mode 100644 drivers/net/qlge/qlge.h create mode 100644 drivers/net/qlge/qlge_dbg.c create mode 100644 drivers/net/qlge/qlge_ethtool.c create mode 100644 drivers/net/qlge/qlge_main.c create mode 100644 drivers/net/qlge/qlge_mpi.c (limited to 'Documentation') diff --git a/Documentation/networking/LICENSE.qlge b/Documentation/networking/LICENSE.qlge new file mode 100644 index 00000000000..123b6edd7f1 --- /dev/null +++ b/Documentation/networking/LICENSE.qlge @@ -0,0 +1,46 @@ +Copyright (c) 2003-2008 QLogic Corporation +QLogic Linux Networking HBA Driver + +This program includes a device driver for Linux 2.6 that may be +distributed with QLogic hardware specific firmware binary file. +You may modify and redistribute the device driver code under the +GNU General Public License as published by the Free Software +Foundation (version 2 or a later version). + +You may redistribute the hardware specific firmware binary file +under the following terms: + + 1. Redistribution of source code (only if applicable), + must retain the above copyright notice, this list of + conditions and the following disclaimer. + + 2. Redistribution in binary form must reproduce the above + copyright notice, this list of conditions and the + following disclaimer in the documentation and/or other + materials provided with the distribution. + + 3. The name of QLogic Corporation may not be used to + endorse or promote products derived from this software + without specific prior written permission + +REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE, +THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY +EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR +BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED +TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT +CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR +OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT, +TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN +ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN +COMBINATION WITH THIS PROGRAM. + diff --git a/MAINTAINERS b/MAINTAINERS index c8203d780f0..106684e45e1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3396,6 +3396,13 @@ M: linux-driver@qlogic.com L: netdev@vger.kernel.org S: Supported +QLOGIC QLGE 10Gb ETHERNET DRIVER +P: Ron Mercer +M: linux-driver@qlogic.com +M: ron.mercer@qlogic.com +L: netdev@vger.kernel.org +S: Supported + QNX4 FILESYSTEM P: Anders Larsen M: al@alarsen.net diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 069755af761..69c81da48eb 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2526,6 +2526,15 @@ config BNX2X To compile this driver as a module, choose M here: the module will be called bnx2x. This is recommended. +config QLGE + tristate "QLogic QLGE 10Gb Ethernet Driver Support" + depends on PCI + help + This driver supports QLogic ISP8XXX 10Gb Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called qlge. + source "drivers/net/sfc/Kconfig" endif # NETDEV_10000 diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 016e23f000e..fa2510b2e60 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -131,6 +131,7 @@ obj-$(CONFIG_AX88796) += ax88796.o obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o obj-$(CONFIG_QLA3XXX) += qla3xxx.o +obj-$(CONFIG_QLGE) += qlge/ obj-$(CONFIG_PPP) += ppp_generic.o obj-$(CONFIG_PPP_ASYNC) += ppp_async.o diff --git a/drivers/net/qlge/Makefile b/drivers/net/qlge/Makefile new file mode 100644 index 00000000000..8a197658d76 --- /dev/null +++ b/drivers/net/qlge/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the Qlogic 10GbE PCI Express ethernet driver +# + +obj-$(CONFIG_QLGE) += qlge.o + +qlge-objs := qlge_main.o qlge_dbg.o qlge_mpi.o qlge_ethtool.o diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h new file mode 100644 index 00000000000..c37ea436c91 --- /dev/null +++ b/drivers/net/qlge/qlge.h @@ -0,0 +1,1593 @@ +/* + * QLogic QLA41xx NIC HBA Driver + * Copyright (c) 2003-2006 QLogic Corporation + * + * See LICENSE.qlge for copyright and licensing details. + */ +#ifndef _QLGE_H_ +#define _QLGE_H_ + +#include +#include + +/* + * General definitions... + */ +#define DRV_NAME "qlge" +#define DRV_STRING "QLogic 10 Gigabit PCI-E Ethernet Driver " +#define DRV_VERSION "v1.00.00-b3" + +#define PFX "qlge: " +#define QPRINTK(qdev, nlevel, klevel, fmt, args...) \ + do { \ + if (!((qdev)->msg_enable & NETIF_MSG_##nlevel)) \ + ; \ + else \ + dev_printk(KERN_##klevel, &((qdev)->pdev->dev), \ + "%s: " fmt, __func__, ##args); \ + } while (0) + +#define QLGE_VENDOR_ID 0x1077 +#define QLGE_DEVICE_ID1 0x8012 +#define QLGE_DEVICE_ID 0x8000 + +#define MAX_RX_RINGS 128 +#define MAX_TX_RINGS 128 + +#define NUM_TX_RING_ENTRIES 256 +#define NUM_RX_RING_ENTRIES 256 + +#define NUM_SMALL_BUFFERS 512 +#define NUM_LARGE_BUFFERS 512 + +#define SMALL_BUFFER_SIZE 256 +#define LARGE_BUFFER_SIZE PAGE_SIZE +#define MAX_SPLIT_SIZE 1023 +#define QLGE_SB_PAD 32 + +#define DFLT_COALESCE_WAIT 100 /* 100 usec wait for coalescing */ +#define MAX_INTER_FRAME_WAIT 10 /* 10 usec max interframe-wait for coalescing */ +#define DFLT_INTER_FRAME_WAIT (MAX_INTER_FRAME_WAIT/2) +#define UDELAY_COUNT 3 +#define UDELAY_DELAY 10 + + +#define TX_DESC_PER_IOCB 8 +/* The maximum number of frags we handle is based + * on PAGE_SIZE... + */ +#if (PAGE_SHIFT == 12) || (PAGE_SHIFT == 13) /* 4k & 8k pages */ +#define TX_DESC_PER_OAL ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2) +#elif (PAGE_SHIFT == 16) /* 64k pages */ +#define TX_DESC_PER_OAL 0 +#endif + +#define DB_PAGE_SIZE 4096 + +/* + * Processor Address Register (PROC_ADDR) bit definitions. + */ +enum { + + /* Misc. stuff */ + MAILBOX_COUNT = 16, + + PROC_ADDR_RDY = (1 << 31), + PROC_ADDR_R = (1 << 30), + PROC_ADDR_ERR = (1 << 29), + PROC_ADDR_DA = (1 << 28), + PROC_ADDR_FUNC0_MBI = 0x00001180, + PROC_ADDR_FUNC0_MBO = (PROC_ADDR_FUNC0_MBI + MAILBOX_COUNT), + PROC_ADDR_FUNC0_CTL = 0x000011a1, + PROC_ADDR_FUNC2_MBI = 0x00001280, + PROC_ADDR_FUNC2_MBO = (PROC_ADDR_FUNC2_MBI + MAILBOX_COUNT), + PROC_ADDR_FUNC2_CTL = 0x000012a1, + PROC_ADDR_MPI_RISC = 0x00000000, + PROC_ADDR_MDE = 0x00010000, + PROC_ADDR_REGBLOCK = 0x00020000, + PROC_ADDR_RISC_REG = 0x00030000, +}; + +/* + * System Register (SYS) bit definitions. + */ +enum { + SYS_EFE = (1 << 0), + SYS_FAE = (1 << 1), + SYS_MDC = (1 << 2), + SYS_DST = (1 << 3), + SYS_DWC = (1 << 4), + SYS_EVW = (1 << 5), + SYS_OMP_DLY_MASK = 0x3f000000, + /* + * There are no values defined as of edit #15. + */ + SYS_ODI = (1 << 14), +}; + +/* + * Reset/Failover Register (RST_FO) bit definitions. + */ +enum { + RST_FO_TFO = (1 << 0), + RST_FO_RR_MASK = 0x00060000, + RST_FO_RR_CQ_CAM = 0x00000000, + RST_FO_RR_DROP = 0x00000001, + RST_FO_RR_DQ = 0x00000002, + RST_FO_RR_RCV_FUNC_CQ = 0x00000003, + RST_FO_FRB = (1 << 12), + RST_FO_MOP = (1 << 13), + RST_FO_REG = (1 << 14), + RST_FO_FR = (1 << 15), +}; + +/* + * Function Specific Control Register (FSC) bit definitions. + */ +enum { + FSC_DBRST_MASK = 0x00070000, + FSC_DBRST_256 = 0x00000000, + FSC_DBRST_512 = 0x00000001, + FSC_DBRST_768 = 0x00000002, + FSC_DBRST_1024 = 0x00000003, + FSC_DBL_MASK = 0x00180000, + FSC_DBL_DBRST = 0x00000000, + FSC_DBL_MAX_PLD = 0x00000008, + FSC_DBL_MAX_BRST = 0x00000010, + FSC_DBL_128_BYTES = 0x00000018, + FSC_EC = (1 << 5), + FSC_EPC_MASK = 0x00c00000, + FSC_EPC_INBOUND = (1 << 6), + FSC_EPC_OUTBOUND = (1 << 7), + FSC_VM_PAGESIZE_MASK = 0x07000000, + FSC_VM_PAGE_2K = 0x00000100, + FSC_VM_PAGE_4K = 0x00000200, + FSC_VM_PAGE_8K = 0x00000300, + FSC_VM_PAGE_64K = 0x00000600, + FSC_SH = (1 << 11), + FSC_DSB = (1 << 12), + FSC_STE = (1 << 13), + FSC_FE = (1 << 15), +}; + +/* + * Host Command Status Register (CSR) bit definitions. + */ +enum { + CSR_ERR_STS_MASK = 0x0000003f, + /* + * There are no valued defined as of edit #15. + */ + CSR_RR = (1 << 8), + CSR_HRI = (1 << 9), + CSR_RP = (1 << 10), + CSR_CMD_PARM_SHIFT = 22, + CSR_CMD_NOP = 0x00000000, + CSR_CMD_SET_RST = 0x1000000, + CSR_CMD_CLR_RST = 0x20000000, + CSR_CMD_SET_PAUSE = 0x30000000, + CSR_CMD_CLR_PAUSE = 0x40000000, + CSR_CMD_SET_H2R_INT = 0x50000000, + CSR_CMD_CLR_H2R_INT = 0x60000000, + CSR_CMD_PAR_EN = 0x70000000, + CSR_CMD_SET_BAD_PAR = 0x80000000, + CSR_CMD_CLR_BAD_PAR = 0x90000000, + CSR_CMD_CLR_R2PCI_INT = 0xa0000000, +}; + +/* + * Configuration Register (CFG) bit definitions. + */ +enum { + CFG_LRQ = (1 << 0), + CFG_DRQ = (1 << 1), + CFG_LR = (1 << 2), + CFG_DR = (1 << 3), + CFG_LE = (1 << 5), + CFG_LCQ = (1 << 6), + CFG_DCQ = (1 << 7), + CFG_Q_SHIFT = 8, + CFG_Q_MASK = 0x7f000000, +}; + +/* + * Status Register (STS) bit definitions. + */ +enum { + STS_FE = (1 << 0), + STS_PI = (1 << 1), + STS_PL0 = (1 << 2), + STS_PL1 = (1 << 3), + STS_PI0 = (1 << 4), + STS_PI1 = (1 << 5), + STS_FUNC_ID_MASK = 0x000000c0, + STS_FUNC_ID_SHIFT = 6, + STS_F0E = (1 << 8), + STS_F1E = (1 << 9), + STS_F2E = (1 << 10), + STS_F3E = (1 << 11), + STS_NFE = (1 << 12), +}; + +/* + * Interrupt Enable Register (INTR_EN) bit definitions. + */ +enum { + INTR_EN_INTR_MASK = 0x007f0000, + INTR_EN_TYPE_MASK = 0x03000000, + INTR_EN_TYPE_ENABLE = 0x00000100, + INTR_EN_TYPE_DISABLE = 0x00000200, + INTR_EN_TYPE_READ = 0x00000300, + INTR_EN_IHD = (1 << 13), + INTR_EN_IHD_MASK = (INTR_EN_IHD << 16), + INTR_EN_EI = (1 << 14), + INTR_EN_EN = (1 << 15), +}; + +/* + * Interrupt Mask Register (INTR_MASK) bit definitions. + */ +enum { + INTR_MASK_PI = (1 << 0), + INTR_MASK_HL0 = (1 << 1), + INTR_MASK_LH0 = (1 << 2), + INTR_MASK_HL1 = (1 << 3), + INTR_MASK_LH1 = (1 << 4), + INTR_MASK_SE = (1 << 5), + INTR_MASK_LSC = (1 << 6), + INTR_MASK_MC = (1 << 7), + INTR_MASK_LINK_IRQS = INTR_MASK_LSC | INTR_MASK_SE | INTR_MASK_MC, +}; + +/* + * Register (REV_ID) bit definitions. + */ +enum { + REV_ID_MASK = 0x0000000f, + REV_ID_NICROLL_SHIFT = 0, + REV_ID_NICREV_SHIFT = 4, + REV_ID_XGROLL_SHIFT = 8, + REV_ID_XGREV_SHIFT = 12, + REV_ID_CHIPREV_SHIFT = 28, +}; + +/* + * Force ECC Error Register (FRC_ECC_ERR) bit definitions. + */ +enum { + FRC_ECC_ERR_VW = (1 << 12), + FRC_ECC_ERR_VB = (1 << 13), + FRC_ECC_ERR_NI = (1 << 14), + FRC_ECC_ERR_NO = (1 << 15), + FRC_ECC_PFE_SHIFT = 16, + FRC_ECC_ERR_DO = (1 << 18), + FRC_ECC_P14 = (1 << 19), +}; + +/* + * Error Status Register (ERR_STS) bit definitions. + */ +enum { + ERR_STS_NOF = (1 << 0), + ERR_STS_NIF = (1 << 1), + ERR_STS_DRP = (1 << 2), + ERR_STS_XGP = (1 << 3), + ERR_STS_FOU = (1 << 4), + ERR_STS_FOC = (1 << 5), + ERR_STS_FOF = (1 << 6), + ERR_STS_FIU = (1 << 7), + ERR_STS_FIC = (1 << 8), + ERR_STS_FIF = (1 << 9), + ERR_STS_MOF = (1 << 10), + ERR_STS_TA = (1 << 11), + ERR_STS_MA = (1 << 12), + ERR_STS_MPE = (1 << 13), + ERR_STS_SCE = (1 << 14), + ERR_STS_STE = (1 << 15), + ERR_STS_FOW = (1 << 16), + ERR_STS_UE = (1 << 17), + ERR_STS_MCH = (1 << 26), + ERR_STS_LOC_SHIFT = 27, +}; + +/* + * RAM Debug Address Register (RAM_DBG_ADDR) bit definitions. + */ +enum { + RAM_DBG_ADDR_FW = (1 << 30), + RAM_DBG_ADDR_FR = (1 << 31), +}; + +/* + * Semaphore Register (SEM) bit definitions. + */ +enum { + /* + * Example: + * reg = SEM_XGMAC0_MASK | (SEM_SET << SEM_XGMAC0_SHIFT) + */ + SEM_CLEAR = 0, + SEM_SET = 1, + SEM_FORCE = 3, + SEM_XGMAC0_SHIFT = 0, + SEM_XGMAC1_SHIFT = 2, + SEM_ICB_SHIFT = 4, + SEM_MAC_ADDR_SHIFT = 6, + SEM_FLASH_SHIFT = 8, + SEM_PROBE_SHIFT = 10, + SEM_RT_IDX_SHIFT = 12, + SEM_PROC_REG_SHIFT = 14, + SEM_XGMAC0_MASK = 0x00030000, + SEM_XGMAC1_MASK = 0x000c0000, + SEM_ICB_MASK = 0x00300000, + SEM_MAC_ADDR_MASK = 0x00c00000, + SEM_FLASH_MASK = 0x03000000, + SEM_PROBE_MASK = 0x0c000000, + SEM_RT_IDX_MASK = 0x30000000, + SEM_PROC_REG_MASK = 0xc0000000, +}; + +/* + * 10G MAC Address Register (XGMAC_ADDR) bit definitions. + */ +enum { + XGMAC_ADDR_RDY = (1 << 31), + XGMAC_ADDR_R = (1 << 30), + XGMAC_ADDR_XME = (1 << 29), + + /* XGMAC control registers */ + PAUSE_SRC_LO = 0x00000100, + PAUSE_SRC_HI = 0x00000104, + GLOBAL_CFG = 0x00000108, + GLOBAL_CFG_RESET = (1 << 0), + GLOBAL_CFG_JUMBO = (1 << 6), + GLOBAL_CFG_TX_STAT_EN = (1 << 10), + GLOBAL_CFG_RX_STAT_EN = (1 << 11), + TX_CFG = 0x0000010c, + TX_CFG_RESET = (1 << 0), + TX_CFG_EN = (1 << 1), + TX_CFG_PREAM = (1 << 2), + RX_CFG = 0x00000110, + RX_CFG_RESET = (1 << 0), + RX_CFG_EN = (1 << 1), + RX_CFG_PREAM = (1 << 2), + FLOW_CTL = 0x0000011c, + PAUSE_OPCODE = 0x00000120, + PAUSE_TIMER = 0x00000124, + PAUSE_FRM_DEST_LO = 0x00000128, + PAUSE_FRM_DEST_HI = 0x0000012c, + MAC_TX_PARAMS = 0x00000134, + MAC_TX_PARAMS_JUMBO = (1 << 31), + MAC_TX_PARAMS_SIZE_SHIFT = 16, + MAC_RX_PARAMS = 0x00000138, + MAC_SYS_INT = 0x00000144, + MAC_SYS_INT_MASK = 0x00000148, + MAC_MGMT_INT = 0x0000014c, + MAC_MGMT_IN_MASK = 0x00000150, + EXT_ARB_MODE = 0x000001fc, + + /* XGMAC TX statistics registers */ + TX_PKTS = 0x00000200, + TX_BYTES = 0x00000208, + TX_MCAST_PKTS = 0x00000210, + TX_BCAST_PKTS = 0x00000218, + TX_UCAST_PKTS = 0x00000220, + TX_CTL_PKTS = 0x00000228, + TX_PAUSE_PKTS = 0x00000230, + TX_64_PKT = 0x00000238, + TX_65_TO_127_PKT = 0x00000240, + TX_128_TO_255_PKT = 0x00000248, + TX_256_511_PKT = 0x00000250, + TX_512_TO_1023_PKT = 0x00000258, + TX_1024_TO_1518_PKT = 0x00000260, + TX_1519_TO_MAX_PKT = 0x00000268, + TX_UNDERSIZE_PKT = 0x00000270, + TX_OVERSIZE_PKT = 0x00000278, + + /* XGMAC statistics control registers */ + RX_HALF_FULL_DET = 0x000002a0, + TX_HALF_FULL_DET = 0x000002a4, + RX_OVERFLOW_DET = 0x000002a8, + TX_OVERFLOW_DET = 0x000002ac, + RX_HALF_FULL_MASK = 0x000002b0, + TX_HALF_FULL_MASK = 0x000002b4, + RX_OVERFLOW_MASK = 0x000002b8, + TX_OVERFLOW_MASK = 0x000002bc, + STAT_CNT_CTL = 0x000002c0, + STAT_CNT_CTL_CLEAR_TX = (1 << 0), + STAT_CNT_CTL_CLEAR_RX = (1 << 1), + AUX_RX_HALF_FULL_DET = 0x000002d0, + AUX_TX_HALF_FULL_DET = 0x000002d4, + AUX_RX_OVERFLOW_DET = 0x000002d8, + AUX_TX_OVERFLOW_DET = 0x000002dc, + AUX_RX_HALF_FULL_MASK = 0x000002f0, + AUX_TX_HALF_FULL_MASK = 0x000002f4, + AUX_RX_OVERFLOW_MASK = 0x000002f8, + AUX_TX_OVERFLOW_MASK = 0x000002fc, + + /* XGMAC RX statistics registers */ + RX_BYTES = 0x00000300, + RX_BYTES_OK = 0x00000308, + RX_PKTS = 0x00000310, + RX_PKTS_OK = 0x00000318, + RX_BCAST_PKTS = 0x00000320, + RX_MCAST_PKTS = 0x00000328, + RX_UCAST_PKTS = 0x00000330, + RX_UNDERSIZE_PKTS = 0x00000338, + RX_OVERSIZE_PKTS = 0x00000340, + RX_JABBER_PKTS = 0x00000348, + RX_UNDERSIZE_FCERR_PKTS = 0x00000350, + RX_DROP_EVENTS = 0x00000358, + RX_FCERR_PKTS = 0x00000360, + RX_ALIGN_ERR = 0x00000368, + RX_SYMBOL_ERR = 0x00000370, + RX_MAC_ERR = 0x00000378, + RX_CTL_PKTS = 0x00000380, + RX_PAUSE_PKTS = 0x00000384, + RX_64_PKTS = 0x00000390, + RX_65_TO_127_PKTS = 0x00000398, + RX_128_255_PKTS = 0x000003a0, + RX_256_511_PKTS = 0x000003a8, + RX_512_TO_1023_PKTS = 0x000003b0, + RX_1024_TO_1518_PKTS = 0x000003b8, + RX_1519_TO_MAX_PKTS = 0x000003c0, + RX_LEN_ERR_PKTS = 0x000003c8, + + /* XGMAC MDIO control registers */ + MDIO_TX_DATA = 0x00000400, + MDIO_RX_DATA = 0x00000410, + MDIO_CMD = 0x00000420, + MDIO_PHY_ADDR = 0x00000430, + MDIO_PORT = 0x00000440, + MDIO_STATUS = 0x00000450, + + /* XGMAC AUX statistics registers */ +}; + +/* + * Enhanced Transmission Schedule Registers (NIC_ETS,CNA_ETS) bit definitions. + */ +enum { + ETS_QUEUE_SHIFT = 29, + ETS_REF = (1 << 26), + ETS_RS = (1 << 27), + ETS_P = (1 << 28), + ETS_FC_COS_SHIFT = 23, +}; + +/* + * Flash Address Register (FLASH_ADDR) bit definitions. + */ +enum { + FLASH_ADDR_RDY = (1 << 31), + FLASH_ADDR_R = (1 << 30), + FLASH_ADDR_ERR = (1 << 29), +}; + +/* + * Stop CQ Processing Register (CQ_STOP) bit definitions. + */ +enum { + CQ_STOP_QUEUE_MASK = (0x007f0000), + CQ_STOP_TYPE_MASK = (0x03000000), + CQ_STOP_TYPE_START = 0x00000100, + CQ_STOP_TYPE_STOP = 0x00000200, + CQ_STOP_TYPE_READ = 0x00000300, + CQ_STOP_EN = (1 << 15), +}; + +/* + * MAC Protocol Address Index Register (MAC_ADDR_IDX) bit definitions. + */ +enum { + MAC_ADDR_IDX_SHIFT = 4, + MAC_ADDR_TYPE_SHIFT = 16, + MAC_ADDR_TYPE_MASK = 0x000f0000, + MAC_ADDR_TYPE_CAM_MAC = 0x00000000, + MAC_ADDR_TYPE_MULTI_MAC = 0x00010000, + MAC_ADDR_TYPE_VLAN = 0x00020000, + MAC_ADDR_TYPE_MULTI_FLTR = 0x00030000, + MAC_ADDR_TYPE_FC_MAC = 0x00040000, + MAC_ADDR_TYPE_MGMT_MAC = 0x00050000, + MAC_ADDR_TYPE_MGMT_VLAN = 0x00060000, + MAC_ADDR_TYPE_MGMT_V4 = 0x00070000, + MAC_ADDR_TYPE_MGMT_V6 = 0x00080000, + MAC_ADDR_TYPE_MGMT_TU_DP = 0x00090000, + MAC_ADDR_ADR = (1 << 25), + MAC_ADDR_RS = (1 << 26), + MAC_ADDR_E = (1 << 27), + MAC_ADDR_MR = (1 << 30), + MAC_ADDR_MW = (1 << 31), + MAX_MULTICAST_ENTRIES = 32, +}; + +/* + * MAC Protocol Address Index Register (SPLT_HDR) bit definitions. + */ +enum { + SPLT_HDR_EP = (1 << 31), +}; + +/* + * FCoE Receive Configuration Register (FC_RCV_CFG) bit definitions. + */ +enum { + FC_RCV_CFG_ECT = (1 << 15), + FC_RCV_CFG_DFH = (1 << 20), + FC_RCV_CFG_DVF = (1 << 21), + FC_RCV_CFG_RCE = (1 << 27), + FC_RCV_CFG_RFE = (1 << 28), + FC_RCV_CFG_TEE = (1 << 29), + FC_RCV_CFG_TCE = (1 << 30), + FC_RCV_CFG_TFE = (1 << 31), +}; + +/* + * NIC Receive Configuration Register (NIC_RCV_CFG) bit definitions. + */ +enum { + NIC_RCV_CFG_PPE = (1 << 0), + NIC_RCV_CFG_VLAN_MASK = 0x00060000, + NIC_RCV_CFG_VLAN_ALL = 0x00000000, + NIC_RCV_CFG_VLAN_MATCH_ONLY = 0x00000002, + NIC_RCV_CFG_VLAN_MATCH_AND_NON = 0x00000004, + NIC_RCV_CFG_VLAN_NONE_AND_NON = 0x00000006, + NIC_RCV_CFG_RV = (1 << 3), + NIC_RCV_CFG_DFQ_MASK = (0x7f000000), + NIC_RCV_CFG_DFQ_SHIFT = 8, + NIC_RCV_CFG_DFQ = 0, /* HARDCODE default queue to 0. */ +}; + +/* + * Mgmt Receive Configuration Register (MGMT_RCV_CFG) bit definitions. + */ +enum { + MGMT_RCV_CFG_ARP = (1 << 0), + MGMT_RCV_CFG_DHC = (1 << 1), + MGMT_RCV_CFG_DHS = (1 << 2), + MGMT_RCV_CFG_NP = (1 << 3), + MGMT_RCV_CFG_I6N = (1 << 4), + MGMT_RCV_CFG_I6R = (1 << 5), + MGMT_RCV_CFG_DH6 = (1 << 6), + MGMT_RCV_CFG_UD1 = (1 << 7), + MGMT_RCV_CFG_UD0 = (1 << 8), + MGMT_RCV_CFG_BCT = (1 << 9), + MGMT_RCV_CFG_MCT = (1 << 10), + MGMT_RCV_CFG_DM = (1 << 11), + MGMT_RCV_CFG_RM = (1 << 12), + MGMT_RCV_CFG_STL = (1 << 13), + MGMT_RCV_CFG_VLAN_MASK = 0xc0000000, + MGMT_RCV_CFG_VLAN_ALL = 0x00000000, + MGMT_RCV_CFG_VLAN_MATCH_ONLY = 0x00004000, + MGMT_RCV_CFG_VLAN_MATCH_AND_NON = 0x00008000, + MGMT_RCV_CFG_VLAN_NONE_AND_NON = 0x0000c000, +}; + +/* + * Routing Index Register (RT_IDX) bit definitions. + */ +enum { + RT_IDX_IDX_SHIFT = 8, + RT_IDX_TYPE_MASK = 0x000f0000, + RT_IDX_TYPE_RT = 0x00000000, + RT_IDX_TYPE_RT_INV = 0x00010000, + RT_IDX_TYPE_NICQ = 0x00020000, + RT_IDX_TYPE_NICQ_INV = 0x00030000, + RT_IDX_DST_MASK = 0x00700000, + RT_IDX_DST_RSS = 0x00000000, + RT_IDX_DST_CAM_Q = 0x00100000, + RT_IDX_DST_COS_Q = 0x00200000, + RT_IDX_DST_DFLT_Q = 0x00300000, + RT_IDX_DST_DEST_Q = 0x00400000, + RT_IDX_RS = (1 << 26), + RT_IDX_E = (1 << 27), + RT_IDX_MR = (1 << 30), + RT_IDX_MW = (1 << 31), + + /* Nic Queue format - type 2 bits */ + RT_IDX_BCAST = (1 << 0), + RT_IDX_MCAST = (1 << 1), + RT_IDX_MCAST_MATCH = (1 << 2), + RT_IDX_MCAST_REG_MATCH = (1 << 3), + RT_IDX_MCAST_HASH_MATCH = (1 << 4), + RT_IDX_FC_MACH = (1 << 5), + RT_IDX_ETH_FCOE = (1 << 6), + RT_IDX_CAM_HIT = (1 << 7), + RT_IDX_CAM_BIT0 = (1 << 8), + RT_IDX_CAM_BIT1 = (1 << 9), + RT_IDX_VLAN_TAG = (1 << 10), + RT_IDX_VLAN_MATCH = (1 << 11), + RT_IDX_VLAN_FILTER = (1 << 12), + RT_IDX_ETH_SKIP1 = (1 << 13), + RT_IDX_ETH_SKIP2 = (1 << 14), + RT_IDX_BCAST_MCAST_MATCH = (1 << 15), + RT_IDX_802_3 = (1 << 16), + RT_IDX_LLDP = (1 << 17), + RT_IDX_UNUSED018 = (1 << 18), + RT_IDX_UNUSED019 = (1 << 19), + RT_IDX_UNUSED20 = (1 << 20), + RT_IDX_UNUSED21 = (1 << 21), + RT_IDX_ERR = (1 << 22), + RT_IDX_VALID = (1 << 23), + RT_IDX_TU_CSUM_ERR = (1 << 24), + RT_IDX_IP_CSUM_ERR = (1 << 25), + RT_IDX_MAC_ERR = (1 << 26), + RT_IDX_RSS_TCP6 = (1 << 27), + RT_IDX_RSS_TCP4 = (1 << 28), + RT_IDX_RSS_IPV6 = (1 << 29), + RT_IDX_RSS_IPV4 = (1 << 30), + RT_IDX_RSS_MATCH = (1 << 31), + + /* Hierarchy for the NIC Queue Mask */ + RT_IDX_ALL_ERR_SLOT = 0, + RT_IDX_MAC_ERR_SLOT = 0, + RT_IDX_IP_CSUM_ERR_SLOT = 1, + RT_IDX_TCP_UDP_CSUM_ERR_SLOT = 2, + RT_IDX_BCAST_SLOT = 3, + RT_IDX_MCAST_MATCH_SLOT = 4, + RT_IDX_ALLMULTI_SLOT = 5, + RT_IDX_UNUSED6_SLOT = 6, + RT_IDX_UNUSED7_SLOT = 7, + RT_IDX_RSS_MATCH_SLOT = 8, + RT_IDX_RSS_IPV4_SLOT = 8, + RT_IDX_RSS_IPV6_SLOT = 9, + RT_IDX_RSS_TCP4_SLOT = 10, + RT_IDX_RSS_TCP6_SLOT = 11, + RT_IDX_CAM_HIT_SLOT = 12, + RT_IDX_UNUSED013 = 13, + RT_IDX_UNUSED014 = 14, + RT_IDX_PROMISCUOUS_SLOT = 15, + RT_IDX_MAX_SLOTS = 16, +}; + +/* + * Control Register Set Map + */ +enum { + PROC_ADDR = 0, /* Use semaphore */ + PROC_DATA = 0x04, /* Use semaphore */ + SYS = 0x08, + RST_FO = 0x0c, + FSC = 0x10, + CSR = 0x14, + LED = 0x18, + ICB_RID = 0x1c, /* Use semaphore */ + ICB_L = 0x20, /* Use semaphore */ + ICB_H = 0x24, /* Use semaphore */ + CFG = 0x28, + BIOS_ADDR = 0x2c, + STS = 0x30, + INTR_EN = 0x34, + INTR_MASK = 0x38, + ISR1 = 0x3c, + ISR2 = 0x40, + ISR3 = 0x44, + ISR4 = 0x48, + REV_ID = 0x4c, + FRC_ECC_ERR = 0x50, + ERR_STS = 0x54, + RAM_DBG_ADDR = 0x58, + RAM_DBG_DATA = 0x5c, + ECC_ERR_CNT = 0x60, + SEM = 0x64, + GPIO_1 = 0x68, /* Use semaphore */ + GPIO_2 = 0x6c, /* Use semaphore */ + GPIO_3 = 0x70, /* Use semaphore */ + RSVD2 = 0x74, + XGMAC_ADDR = 0x78, /* Use semaphore */ + XGMAC_DATA = 0x7c, /* Use semaphore */ + NIC_ETS = 0x80, + CNA_ETS = 0x84, + FLASH_ADDR = 0x88, /* Use semaphore */ + FLASH_DATA = 0x8c, /* Use semaphore */ + CQ_STOP = 0x90, + PAGE_TBL_RID = 0x94, + WQ_PAGE_TBL_LO = 0x98, + WQ_PAGE_TBL_HI = 0x9c, + CQ_PAGE_TBL_LO = 0xa0, + CQ_PAGE_TBL_HI = 0xa4, + MAC_ADDR_IDX = 0xa8, /* Use semaphore */ + MAC_ADDR_DATA = 0xac, /* Use semaphore */ + COS_DFLT_CQ1 = 0xb0, + COS_DFLT_CQ2 = 0xb4, + ETYPE_SKIP1 = 0xb8, + ETYPE_SKIP2 = 0xbc, + SPLT_HDR = 0xc0, + FC_PAUSE_THRES = 0xc4, + NIC_PAUSE_THRES = 0xc8, + FC_ETHERTYPE = 0xcc, + FC_RCV_CFG = 0xd0, + NIC_RCV_CFG = 0xd4, + FC_COS_TAGS = 0xd8, + NIC_COS_TAGS = 0xdc, + MGMT_RCV_CFG = 0xe0, + RT_IDX = 0xe4, + RT_DATA = 0xe8, + RSVD7 = 0xec, + XG_SERDES_ADDR = 0xf0, + XG_SERDES_DATA = 0xf4, + PRB_MX_ADDR = 0xf8, /* Use semaphore */ + PRB_MX_DATA = 0xfc, /* Use semaphore */ +}; + +/* + * CAM output format. + */ +enum { + CAM_OUT_ROUTE_FC = 0, + CAM_OUT_ROUTE_NIC = 1, + CAM_OUT_FUNC_SHIFT = 2, + CAM_OUT_RV = (1 << 4), + CAM_OUT_SH = (1 << 15), + CAM_OUT_CQ_ID_SHIFT = 5, +}; + +/* + * Mailbox definitions + */ +enum { + /* Asynchronous Event Notifications */ + AEN_SYS_ERR = 0x00008002, + AEN_LINK_UP = 0x00008011, + AEN_LINK_DOWN = 0x00008012, + AEN_IDC_CMPLT = 0x00008100, + AEN_IDC_REQ = 0x00008101, + AEN_FW_INIT_DONE = 0x00008400, + AEN_FW_INIT_FAIL = 0x00008401, + + /* Mailbox Command Opcodes. */ + MB_CMD_NOP = 0x00000000, + MB_CMD_EX_FW = 0x00000002, + MB_CMD_MB_TEST = 0x00000006, + MB_CMD_CSUM_TEST = 0x00000007, /* Verify Checksum */ + MB_CMD_ABOUT_FW = 0x00000008, + MB_CMD_LOAD_RISC_RAM = 0x0000000b, + MB_CMD_DUMP_RISC_RAM = 0x0000000c, + MB_CMD_WRITE_RAM = 0x0000000d, + MB_CMD_READ_RAM = 0x0000000f, + MB_CMD_STOP_FW = 0x00000014, + MB_CMD_MAKE_SYS_ERR = 0x0000002a, + MB_CMD_INIT_FW = 0x00000060, + MB_CMD_GET_INIT_CB = 0x00000061, + MB_CMD_GET_FW_STATE = 0x00000069, + MB_CMD_IDC_REQ = 0x00000100, /* Inter-Driver Communication */ + MB_CMD_IDC_ACK = 0x00000101, /* Inter-Driver Communication */ + MB_CMD_SET_WOL_MODE = 0x00000110, /* Wake On Lan */ + MB_WOL_DISABLE = 0x00000000, + MB_WOL_MAGIC_PKT = 0x00000001, + MB_WOL_FLTR = 0x00000002, + MB_WOL_UCAST = 0x00000004, + MB_WOL_MCAST = 0x00000008, + MB_WOL_BCAST = 0x00000010, + MB_WOL_LINK_UP = 0x00000020, + MB_WOL_LINK_DOWN = 0x00000040, + MB_CMD_SET_WOL_FLTR = 0x00000111, /* Wake On Lan Filter */ + MB_CMD_CLEAR_WOL_FLTR = 0x00000112, /* Wake On Lan Filter */ + MB_CMD_SET_WOL_MAGIC = 0x00000113, /* Wake On Lan Magic Packet */ + MB_CMD_CLEAR_WOL_MAGIC = 0x00000114, /* Wake On Lan Magic Packet */ + MB_CMD_PORT_RESET = 0x00000120, + MB_CMD_SET_PORT_CFG = 0x00000122, + MB_CMD_GET_PORT_CFG = 0x00000123, + MB_CMD_SET_ASIC_VOLTS = 0x00000130, + MB_CMD_GET_SNS_DATA = 0x00000131, /* Temp and Volt Sense data. */ + + /* Mailbox Command Status. */ + MB_CMD_STS_GOOD = 0x00004000, /* Success. */ + MB_CMD_STS_INTRMDT = 0x00001000, /* Intermediate Complete. */ + MB_CMD_STS_ERR = 0x00004005, /* Error. */ +}; + +struct mbox_params { + u32 mbox_in[MAILBOX_COUNT]; + u32 mbox_out[MAILBOX_COUNT]; + int in_count; + int out_count; +}; + +struct flash_params { + u8 dev_id_str[4]; + u16 size; + u16 csum; + u16 ver; + u16 sub_dev_id; + u8 mac_addr[6]; + u16 res; +}; + + +/* + * doorbell space for the rx ring context + */ +struct rx_doorbell_context { + u32 cnsmr_idx; /* 0x00 */ + u32 valid; /* 0x04 */ + u32 reserved[4]; /* 0x08-0x14 */ + u32 lbq_prod_idx; /* 0x18 */ + u32 sbq_prod_idx; /* 0x1c */ +}; + +/* + * doorbell space for the tx ring context + */ +struct tx_doorbell_context { + u32 prod_idx; /* 0x00 */ + u32 valid; /* 0x04 */ + u32 reserved[4]; /* 0x08-0x14 */ + u32 lbq_prod_idx; /* 0x18 */ + u32 sbq_prod_idx; /* 0x1c */ +}; + +/* DATA STRUCTURES SHARED WITH HARDWARE. */ + +struct bq_element { + u32 addr_lo; +#define BQ_END 0x00000001 +#define BQ_CONT 0x00000002 +#define BQ_MASK 0x00000003 + u32 addr_hi; +} __attribute((packed)); + +struct tx_buf_desc { + __le64 addr; + __le32 len; +#define TX_DESC_LEN_MASK 0x000fffff +#define TX_DESC_C 0x40000000 +#define TX_DESC_E 0x80000000 +} __attribute((packed)); + +/* + * IOCB Definitions... + */ + +#define OPCODE_OB_MAC_IOCB 0x01 +#define OPCODE_OB_MAC_TSO_IOCB 0x02 +#define OPCODE_IB_MAC_IOCB 0x20 +#define OPCODE_IB_MPI_IOCB 0x21 +#define OPCODE_IB_AE_IOCB 0x3f + +struct ob_mac_iocb_req { + u8 opcode; + u8 flags1; +#define OB_MAC_IOCB_REQ_OI 0x01 +#define OB_MAC_IOCB_REQ_I 0x02 +#define OB_MAC_IOCB_REQ_D 0x08 +#define OB_MAC_IOCB_REQ_F 0x10 + u8 flags2; + u8 flags3; +#define OB_MAC_IOCB_DFP 0x02 +#define OB_MAC_IOCB_V 0x04 + __le32 reserved1[2]; + __le16 frame_len; +#define OB_MAC_IOCB_LEN_MASK 0x3ffff + __le16 reserved2; + __le32 tid; + __le32 txq_idx; + __le32 reserved3; + __le16 vlan_tci; + __le16 reserved4; + struct tx_buf_desc tbd[TX_DESC_PER_IOCB]; +} __attribute((packed)); + +struct ob_mac_iocb_rsp { + u8 opcode; /* */ + u8 flags1; /* */ +#define OB_MAC_IOCB_RSP_OI 0x01 /* */ +#define OB_MAC_IOCB_RSP_I 0x02 /* */ +#define OB_MAC_IOCB_RSP_E 0x08 /* */ +#define OB_MAC_IOCB_RSP_S 0x10 /* too Short */ +#define OB_MAC_IOCB_RSP_L 0x20 /* too Large */ +#define OB_MAC_IOCB_RSP_P 0x40 /* Padded */ + u8 flags2; /* */ + u8 flags3; /* */ +#define OB_MAC_IOCB_RSP_B 0x80 /* */ + __le32 tid; + __le32 txq_idx; + __le32 reserved[13]; +} __attribute((packed)); + +struct ob_mac_tso_iocb_req { + u8 opcode; + u8 flags1; +#define OB_MAC_TSO_IOCB_OI 0x01 +#define OB_MAC_TSO_IOCB_I 0x02 +#define OB_MAC_TSO_IOCB_D 0x08 +#define OB_MAC_TSO_IOCB_IP4 0x40 +#define OB_MAC_TSO_IOCB_IP6 0x80 + u8 flags2; +#define OB_MAC_TSO_IOCB_LSO 0x20 +#define OB_MAC_TSO_IOCB_UC 0x40 +#define OB_MAC_TSO_IOCB_TC 0x80 + u8 flags3; +#define OB_MAC_TSO_IOCB_IC 0x01 +#define OB_MAC_TSO_IOCB_DFP 0x02 +#define OB_MAC_TSO_IOCB_V 0x04 + __le32 reserved1[2]; + __le32 frame_len; + __le32 tid; + __le32 txq_idx; + __le16 total_hdrs_len; + __le16 net_trans_offset; +#define OB_MAC_TRANSPORT_HDR_SHIFT 6 + __le16 vlan_tci; + __le16 mss; + struct tx_buf_desc tbd[TX_DESC_PER_IOCB]; +} __attribute((packed)); + +struct ob_mac_tso_iocb_rsp { + u8 opcode; + u8 flags1; +#define OB_MAC_TSO_IOCB_RSP_OI 0x01 +#define OB_MAC_TSO_IOCB_RSP_I 0x02 +#define OB_MAC_TSO_IOCB_RSP_E 0x08 +#define OB_MAC_TSO_IOCB_RSP_S 0x10 +#define OB_MAC_TSO_IOCB_RSP_L 0x20 +#define OB_MAC_TSO_IOCB_RSP_P 0x40 + u8 flags2; /* */ + u8 flags3; /* */ +#define OB_MAC_TSO_IOCB_RSP_B 0x8000 + __le32 tid; + __le32 txq_idx; + __le32 reserved2[13]; +} __attribute((packed)); + +struct ib_mac_iocb_rsp { + u8 opcode; /* 0x20 */ + u8 flags1; +#define IB_MAC_IOCB_RSP_OI 0x01 /* Overide intr delay */ +#define IB_MAC_IOCB_RSP_I 0x02 /* Disble Intr Generation */ +#define IB_MAC_IOCB_RSP_TE 0x04 /* Checksum error */ +#define IB_MAC_IOCB_RSP_NU 0x08 /* No checksum rcvd */ +#define IB_MAC_IOCB_RSP_IE 0x10 /* IPv4 checksum error */ +#define IB_MAC_IOCB_RSP_M_MASK 0x60 /* Multicast info */ +#define IB_MAC_IOCB_RSP_M_NONE 0x00 /* Not mcast frame */ +#define IB_MAC_IOCB_RSP_M_HASH 0x20 /* HASH mcast frame */ +#define IB_MAC_IOCB_RSP_M_REG 0x40 /* Registered mcast frame */ +#define IB_MAC_IOCB_RSP_M_PROM 0x60 /* Promiscuous mcast frame */ +#define IB_MAC_IOCB_RSP_B 0x80 /* Broadcast frame */ + u8 flags2; +#define IB_MAC_IOCB_RSP_P 0x01 /* Promiscuous frame */ +#define IB_MAC_IOCB_RSP_V 0x02 /* Vlan tag present */ +#define IB_MAC_IOCB_RSP_ERR_MASK 0x1c /* */ +#define IB_MAC_IOCB_RSP_ERR_CODE_ERR 0x04 +#define IB_MAC_IOCB_RSP_ERR_OVERSIZE 0x08 +#define IB_MAC_IOCB_RSP_ERR_UNDERSIZE 0x10 +#define IB_MAC_IOCB_RSP_ERR_PREAMBLE 0x14 +#define IB_MAC_IOCB_RSP_ERR_FRAME_LEN 0x18 +#define IB_MAC_IOCB_RSP_ERR_CRC 0x1c +#define IB_MAC_IOCB_RSP_U 0x20 /* UDP packet */ +#define IB_MAC_IOCB_RSP_T 0x40 /* TCP packet */ +#define IB_MAC_IOCB_RSP_FO 0x80 /* Failover port */ + u8 flags3; +#define IB_MAC_IOCB_RSP_RSS_MASK 0x07 /* RSS mask */ +#define IB_MAC_IOCB_RSP_M_NONE 0x00 /* No RSS match */ +#define IB_MAC_IOCB_RSP_M_IPV4 0x04 /* IPv4 RSS match */ +#define IB_MAC_IOCB_RSP_M_IPV6 0x02 /* IPv6 RSS match */ +#define IB_MAC_IOCB_RSP_M_TCP_V4 0x05 /* TCP with IPv4 */ +#define IB_MAC_IOCB_RSP_M_TCP_V6 0x03 /* TCP with IPv6 */ +#define IB_MAC_IOCB_RSP_V4 0x08 /* IPV4 */ +#define IB_MAC_IOCB_RSP_V6 0x10 /* IPV6 */ +#define IB_MAC_IOCB_RSP_IH 0x20 /* Split after IP header */ +#define IB_MAC_IOCB_RSP_DS 0x40 /* data is in small buffer */ +#define IB_MAC_IOCB_RSP_DL 0x80 /* data is in large buffer */ + __le32 data_len; /* */ + __le32 data_addr_lo; /* */ + __le32 data_addr_hi; /* */ + __le32 rss; /* */ + __le16 vlan_id; /* 12 bits */ +#define IB_MAC_IOCB_RSP_C 0x1000 /* VLAN CFI bit */ +#define IB_MAC_IOCB_RSP_COS_SHIFT 12 /* class of service value */ + + __le16 reserved1; + __le32 reserved2[6]; + __le32 flags4; +#define IB_MAC_IOCB_RSP_HV 0x20000000 /* */ +#define IB_MAC_IOCB_RSP_HS 0x40000000 /* */ +#define IB_MAC_IOCB_RSP_HL 0x80000000 /* */ + __le32 hdr_len; /* */ + __le32 hdr_addr_lo; /* */ + __le32 hdr_addr_hi; /* */ +} __attribute((packed)); + +struct ib_ae_iocb_rsp { + u8 opcode; + u8 flags1; +#define IB_AE_IOCB_RSP_OI 0x01 +#define IB_AE_IOCB_RSP_I 0x02 + u8 event; +#define LINK_UP_EVENT 0x00 +#define LINK_DOWN_EVENT 0x01 +#define CAM_LOOKUP_ERR_EVENT 0x06 +#define SOFT_ECC_ERROR_EVENT 0x07 +#define MGMT_ERR_EVENT 0x08 +#define TEN_GIG_MAC_EVENT 0x09 +#define GPI0_H2L_EVENT 0x10 +#define GPI0_L2H_EVENT 0x20 +#define GPI1_H2L_EVENT 0x11 +#define GPI1_L2H_EVENT 0x21 +#define PCI_ERR_ANON_BUF_RD 0x40 + u8 q_id; + __le32 reserved[15]; +} __attribute((packed)); + +/* + * These three structures are for generic + * handling of ib and ob iocbs. + */ +struct ql_net_rsp_iocb { + u8 opcode; + u8 flags0; + __le16 length; + __le32 tid; + __le32 reserved[14]; +} __attribute((packed)); + +struct net_req_iocb { + u8 opcode; + u8 flags0; + __le16 flags1; + __le32 tid; + __le32 reserved1[30]; +} __attribute((packed)); + +/* + * tx ring initialization control block for chip. + * It is defined as: + * "Work Queue Initialization Control Block" + */ +struct wqicb { + __le16 len; +#define Q_LEN_V (1 << 4) +#define Q_LEN_CPP_CONT 0x0000 +#define Q_LEN_CPP_16 0x0001 +#define Q_LEN_CPP_32 0x0002 +#define Q_LEN_CPP_64 0x0003 + __le16 flags; +#define Q_PRI_SHIFT 1 +#define Q_FLAGS_LC 0x1000 +#define Q_FLAGS_LB 0x2000 +#define Q_FLAGS_LI 0x4000 +#define Q_FLAGS_LO 0x8000 + __le16 cq_id_rss; +#define Q_CQ_ID_RSS_RV 0x8000 + __le16 rid; + __le32 addr_lo; + __le32 addr_hi; + __le32 cnsmr_idx_addr_lo; + __le32 cnsmr_idx_addr_hi; +} __attribute((packed)); + +/* + * rx ring initialization control block for chip. + * It is defined as: + * "Completion Queue Initialization Control Block" + */ +struct cqicb { + u8 msix_vect; + u8 reserved1; + u8 reserved2; + u8 flags; +#define FLAGS_LV 0x08 +#define FLAGS_LS 0x10 +#define FLAGS_LL 0x20 +#define FLAGS_LI 0x40 +#define FLAGS_LC 0x80 + __le16 len; +#define LEN_V (1 << 4) +#define LEN_CPP_CONT 0x0000 +#define LEN_CPP_32 0x0001 +#define LEN_CPP_64 0x0002 +#define LEN_CPP_128 0x0003 + __le16 rid; + __le32 addr_lo; + __le32 addr_hi; + __le32 prod_idx_addr_lo; + __le32 prod_idx_addr_hi; + __le16 pkt_delay; + __le16 irq_delay; + __le32 lbq_addr_lo; + __le32 lbq_addr_hi; + __le16 lbq_buf_size; + __le16 lbq_len; /* entry count */ + __le32 sbq_addr_lo; + __le32 sbq_addr_hi; + __le16 sbq_buf_size; + __le16 sbq_len; /* entry count */ +} __attribute((packed)); + +struct ricb { + u8 base_cq; +#define RSS_L4K 0x80 + u8 flags; +#define RSS_L6K 0x01 +#define RSS_LI 0x02 +#define RSS_LB 0x04 +#define RSS_LM 0x08 +#define RSS_RI4 0x10 +#define RSS_RT4 0x20 +#define RSS_RI6 0x40 +#define RSS_RT6 0x80 + __le16 mask; + __le32 hash_cq_id[256]; + __le32 ipv6_hash_key[10]; + __le32 ipv4_hash_key[4]; +} __attribute((packed)); + +/* SOFTWARE/DRIVER DATA STRUCTURES. */ + +struct oal { + struct tx_buf_desc oal[TX_DESC_PER_OAL]; +}; + +struct map_list { + DECLARE_PCI_UNMAP_ADDR(mapaddr); + DECLARE_PCI_UNMAP_LEN(maplen); +}; + +struct tx_ring_desc { + struct sk_buff *skb; + struct ob_mac_iocb_req *queue_entry; + int index; + struct oal oal; + struct map_list map[MAX_SKB_FRAGS + 1]; + int map_cnt; + struct tx_ring_desc *next; +}; + +struct bq_desc { + union { + struct page *lbq_page; + struct sk_buff *skb; + } p; + struct bq_element *bq; + int index; + DECLARE_PCI_UNMAP_ADDR(mapaddr); + DECLARE_PCI_UNMAP_LEN(maplen); +}; + +#define QL_TXQ_IDX(qdev, skb) (smp_processor_id()%(qdev->tx_ring_count)) + +struct tx_ring { + /* + * queue info. + */ + struct wqicb wqicb; /* structure used to inform chip of new queue */ + void *wq_base; /* pci_alloc:virtual addr for tx */ + dma_addr_t wq_base_dma; /* pci_alloc:dma addr for tx */ + u32 *cnsmr_idx_sh_reg; /* shadow copy of consumer idx */ + dma_addr_t cnsmr_idx_sh_reg_dma; /* dma-shadow copy of consumer */ + u32 wq_size; /* size in bytes of queue area */ + u32 wq_len; /* number of entries in queue */ + void __iomem *prod_idx_db_reg; /* doorbell area index reg at offset 0x00 */ + void __iomem *valid_db_reg; /* doorbell area valid reg at offset 0x04 */ + u16 prod_idx; /* current value for prod idx */ + u16 cq_id; /* completion (rx) queue for tx completions */ + u8 wq_id; /* queue id for this entry */ + u8 reserved1[3]; + struct tx_ring_desc *q; /* descriptor list for the queue */ + spinlock_t lock; + atomic_t tx_count; /* counts down for every outstanding IO */ + atomic_t queue_stopped; /* Turns queue off when full. */ + struct delayed_work tx_work; + struct ql_adapter *qdev; +}; + +/* + * Type of inbound queue. + */ +enum { + DEFAULT_Q = 2, /* Handles slow queue and chip/MPI events. */ + TX_Q = 3, /* Handles outbound completions. */ + RX_Q = 4, /* Handles inbound completions. */ +}; + +struct rx_ring { + struct cqicb cqicb; /* The chip's completion queue init control block. */ + + /* Completion queue elements. */ + void *cq_base; + dma_addr_t cq_base_dma; + u32 cq_size; + u32 cq_len; + u16 cq_id; + u32 *prod_idx_sh_reg; /* Shadowed producer register. */ + dma_addr_t prod_idx_sh_reg_dma; + void __iomem *cnsmr_idx_db_reg; /* PCI doorbell mem area + 0 */ + u32 cnsmr_idx; /* current sw idx */ + struct ql_net_rsp_iocb *curr_entry; /* next entry on queue */ + void __iomem *valid_db_reg; /* PCI doorbell mem area + 0x04 */ + + /* Large buffer queue elements. */ + u32 lbq_len; /* entry count */ + u32 lbq_size; /* size in bytes of queue */ + u32 lbq_buf_size; + void *lbq_base; + dma_addr_t lbq_base_dma; + void *lbq_base_indirect; + dma_addr_t lbq_base_indirect_dma; + struct bq_desc *lbq; /* array of control blocks */ + void __iomem *lbq_prod_idx_db_reg; /* PCI doorbell mem area + 0x18 */ + u32 lbq_prod_idx; /* current sw prod idx */ + u32 lbq_curr_idx; /* next entry we expect */ + u32 lbq_clean_idx; /* beginning of new descs */ + u32 lbq_free_cnt; /* free buffer desc cnt */ + + /* Small buffer queue elements. */ + u32 sbq_len; /* entry count */ + u32 sbq_size; /* size in bytes of queue */ + u32 sbq_buf_size; + void *sbq_base; + dma_addr_t sbq_base_dma; + void *sbq_base_indirect; + dma_addr_t sbq_base_indirect_dma; + struct bq_desc *sbq; /* array of control blocks */ + void __iomem *sbq_prod_idx_db_reg; /* PCI doorbell mem area + 0x1c */ + u32 sbq_prod_idx; /* current sw prod idx */ + u32 sbq_curr_idx; /* next entry we expect */ + u32 sbq_clean_idx; /* beginning of new descs */ + u32 sbq_free_cnt; /* free buffer desc cnt */ + + /* Misc. handler elements. */ + u32 type; /* Type of queue, tx, rx, or default. */ + u32 irq; /* Which vector this ring is assigned. */ + u32 cpu; /* Which CPU this should run on. */ + char name[IFNAMSIZ + 5]; + struct napi_struct napi; + struct delayed_work rx_work; + u8 reserved; + struct ql_adapter *qdev; +}; + +/* + * RSS Initialization Control Block + */ +struct hash_id { + u8 value[4]; +}; + +struct nic_stats { + /* + * These stats come from offset 200h to 278h + * in the XGMAC register. + */ + u64 tx_pkts; + u64 tx_bytes; + u64 tx_mcast_pkts; + u64 tx_bcast_pkts; + u64 tx_ucast_pkts; + u64 tx_ctl_pkts; + u64 tx_pause_pkts; + u64 tx_64_pkt; + u64 tx_65_to_127_pkt; + u64 tx_128_to_255_pkt; + u64 tx_256_511_pkt; + u64 tx_512_to_1023_pkt; + u64 tx_1024_to_1518_pkt; + u64 tx_1519_to_max_pkt; + u64 tx_undersize_pkt; + u64 tx_oversize_pkt; + + /* + * These stats come from offset 300h to 3C8h + * in the XGMAC register. + */ + u64 rx_bytes; + u64 rx_bytes_ok; + u64 rx_pkts; + u64 rx_pkts_ok; + u64 rx_bcast_pkts; + u64 rx_mcast_pkts; + u64 rx_ucast_pkts; + u64 rx_undersize_pkts; + u64 rx_oversize_pkts; + u64 rx_jabber_pkts; + u64 rx_undersize_fcerr_pkts; + u64 rx_drop_events; + u64 rx_fcerr_pkts; + u64 rx_align_err; + u64 rx_symbol_err; + u64 rx_mac_err; + u64 rx_ctl_pkts; + u64 rx_pause_pkts; + u64 rx_64_pkts; + u64 rx_65_to_127_pkts; + u64 rx_128_255_pkts; + u64 rx_256_511_pkts; + u64 rx_512_to_1023_pkts; + u64 rx_1024_to_1518_pkts; + u64 rx_1519_to_max_pkts; + u64 rx_len_err_pkts; +}; + +/* + * intr_context structure is used during initialization + * to hook the interrupts. It is also used in a single + * irq environment as a context to the ISR. + */ +struct intr_context { + struct ql_adapter *qdev; + u32 intr; + u32 hooked; + u32 intr_en_mask; /* value/mask used to enable this intr */ + u32 intr_dis_mask; /* value/mask used to disable this intr */ + u32 intr_read_mask; /* value/mask used to read this intr */ + char name[IFNAMSIZ * 2]; + atomic_t irq_cnt; /* irq_cnt is used in single vector + * environment. It's incremented for each + * irq handler that is scheduled. When each + * handler finishes it decrements irq_cnt and + * enables interrupts if it's zero. */ + irq_handler_t handler; +}; + +/* adapter flags definitions. */ +enum { + QL_ADAPTER_UP = (1 << 0), /* Adapter has been brought up. */ + QL_LEGACY_ENABLED = (1 << 3), + QL_MSI_ENABLED = (1 << 3), + QL_MSIX_ENABLED = (1 << 4), + QL_DMA64 = (1 << 5), + QL_PROMISCUOUS = (1 << 6), + QL_ALLMULTI = (1 << 7), +}; + +/* link_status bit definitions */ +enum { + LOOPBACK_MASK = 0x00000700, + LOOPBACK_PCS = 0x00000100, + LOOPBACK_HSS = 0x00000200, + LOOPBACK_EXT = 0x00000300, + PAUSE_MASK = 0x000000c0, + PAUSE_STD = 0x00000040, + PAUSE_PRI = 0x00000080, + SPEED_MASK = 0x00000038, + SPEED_100Mb = 0x00000000, + SPEED_1Gb = 0x00000008, + SPEED_10Gb = 0x00000010, + LINK_TYPE_MASK = 0x00000007, + LINK_TYPE_XFI = 0x00000001, + LINK_TYPE_XAUI = 0x00000002, + LINK_TYPE_XFI_BP = 0x00000003, + LINK_TYPE_XAUI_BP = 0x00000004, + LINK_TYPE_10GBASET = 0x00000005, +}; + +/* + * The main Adapter structure definition. + * This structure has all fields relevant to the hardware. + */ +struct ql_adapter { + struct ricb ricb; + unsigned long flags; + u32 wol; + + struct nic_stats nic_stats; + + struct vlan_group *vlgrp; + + /* PCI Configuration information for this device */ + struct pci_dev *pdev; + struct net_device *ndev; /* Parent NET device */ + + /* Hardware information */ + u32 chip_rev_id; + u32 func; /* PCI function for this adapter */ + + spinlock_t adapter_lock; + spinlock_t hw_lock; + spinlock_t stats_lock; + spinlock_t legacy_lock; /* used for maintaining legacy intr sync */ + + /* PCI Bus Relative Register Addresses */ + void __iomem *reg_base; + void __iomem *doorbell_area; + u32 doorbell_area_size; + + u32 msg_enable; + + /* Page for Shadow Registers */ + void *rx_ring_shadow_reg_area; + dma_addr_t rx_ring_shadow_reg_dma; + void *tx_ring_shadow_reg_area; + dma_addr_t tx_ring_shadow_reg_dma; + + u32 mailbox_in; + u32 mailbox_out; + + int tx_ring_size; + int rx_ring_size; + u32 intr_count; + struct msix_entry *msi_x_entry; + struct intr_context intr_context[MAX_RX_RINGS]; + + int (*legacy_check) (struct ql_adapter *); + + int tx_ring_count; /* One per online CPU. */ + u32 rss_ring_first_cq_id;/* index of first inbound (rss) rx_ring */ + u32 rss_ring_count; /* One per online CPU. */ + /* + * rx_ring_count = + * one default queue + + * (CPU count * outbound completion rx_ring) + + * (CPU count * inbound (RSS) completion rx_ring) + */ + int rx_ring_count; + int ring_mem_size; + void *ring_mem; + struct rx_ring *rx_ring; + int rx_csum; + struct tx_ring *tx_ring; + u32 default_rx_queue; + + u16 rx_coalesce_usecs; /* cqicb->int_delay */ + u16 rx_max_coalesced_frames; /* cqicb->pkt_int_delay */ + u16 tx_coalesce_usecs; /* cqicb->int_delay */ + u16 tx_max_coalesced_frames; /* cqicb->pkt_int_delay */ + + u32 xg_sem_mask; + u32 port_link_up; + u32 port_init; + u32 link_status; + + struct flash_params flash; + + struct net_device_stats stats; + struct workqueue_struct *q_workqueue; + struct workqueue_struct *workqueue; + struct delayed_work asic_reset_work; + struct delayed_work mpi_reset_work; + struct delayed_work mpi_work; +}; + +/* + * Typical Register accessor for memory mapped device. + */ +static inline u32 ql_read32(const struct ql_adapter *qdev, int reg) +{ + return readl(qdev->reg_base + reg); +} + +/* + * Typical Register accessor for memory mapped device. + */ +static inline void ql_write32(const struct ql_adapter *qdev, int reg, u32 val) +{ + writel(val, qdev->reg_base + reg); +} + +/* + * Doorbell Registers: + * Doorbell registers are virtual registers in the PCI memory space. + * The space is allocated by the chip during PCI initialization. The + * device driver finds the doorbell address in BAR 3 in PCI config space. + * The registers are used to control outbound and inbound queues. For + * example, the producer index for an outbound queue. Each queue uses + * 1 4k chunk of memory. The lower half of the space is for outbound + * queues. The upper half is for inbound queues. + */ +static inline void ql_write_db_reg(u32 val, void __iomem *addr) +{ + writel(val, addr); + mmiowb(); +} + +/* + * Shadow Registers: + * Outbound queues have a consumer index that is maintained by the chip. + * Inbound queues have a producer index that is maintained by the chip. + * For lower overhead, these registers are "shadowed" to host memory + * which allows the device driver to track the queue progress without + * PCI reads. When an entry is placed on an inbound queue, the chip will + * update the relevant index register and then copy the value to the + * shadow register in host memory. + */ +static inline unsigned int ql_read_sh_reg(const volatile void *addr) +{ + return *(volatile unsigned int __force *)addr; +} + +extern char qlge_driver_name[]; +extern const char qlge_driver_version[]; +extern const struct ethtool_ops qlge_ethtool_ops; + +extern int ql_sem_spinlock(struct ql_adapter *qdev, u32 sem_mask); +extern void ql_sem_unlock(struct ql_adapter *qdev, u32 sem_mask); +extern int ql_read_xgmac_reg(struct ql_adapter *qdev, u32 reg, u32 *data); +extern int ql_get_mac_addr_reg(struct ql_adapter *qdev, u32 type, u16 index, + u32 *value); +extern int ql_get_routing_reg(struct ql_adapter *qdev, u32 index, u32 *value); +extern int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit, + u16 q_id); +void ql_queue_fw_error(struct ql_adapter *qdev); +void ql_mpi_work(struct work_struct *work); +void ql_mpi_reset_work(struct work_struct *work); +int ql_wait_reg_rdy(struct ql_adapter *qdev, u32 reg, u32 bit, u32 ebit); +void ql_queue_asic_error(struct ql_adapter *qdev); +void ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr); +void ql_set_ethtool_ops(struct net_device *ndev); +int ql_read_xgmac_reg64(struct ql_adapter *qdev, u32 reg, u64 *data); + +#if 1 +#define QL_ALL_DUMP +#define QL_REG_DUMP +#define QL_DEV_DUMP +#define QL_CB_DUMP +/* #define QL_IB_DUMP */ +/* #define QL_OB_DUMP */ +#endif + +#ifdef QL_REG_DUMP +extern void ql_dump_xgmac_control_regs(struct ql_adapter *qdev); +extern void ql_dump_routing_entries(struct ql_adapter *qdev); +extern void ql_dump_regs(struct ql_adapter *qdev); +#define QL_DUMP_REGS(qdev) ql_dump_regs(qdev) +#define QL_DUMP_ROUTE(qdev) ql_dump_routing_entries(qdev) +#define QL_DUMP_XGMAC_CONTROL_REGS(qdev) ql_dump_xgmac_control_regs(qdev) +#else +#define QL_DUMP_REGS(qdev) +#define QL_DUMP_ROUTE(qdev) +#define QL_DUMP_XGMAC_CONTROL_REGS(qdev) +#endif + +#ifdef QL_STAT_DUMP +extern void ql_dump_stat(struct ql_adapter *qdev); +#define QL_DUMP_STAT(qdev) ql_dump_stat(qdev) +#else +#define QL_DUMP_STAT(qdev) +#endif + +#ifdef QL_DEV_DUMP +extern void ql_dump_qdev(struct ql_adapter *qdev); +#define QL_DUMP_QDEV(qdev) ql_dump_qdev(qdev) +#else +#define QL_DUMP_QDEV(qdev) +#endif + +#ifdef QL_CB_DUMP +extern void ql_dump_wqicb(struct wqicb *wqicb); +extern void ql_dump_tx_ring(struct tx_ring *tx_ring); +extern void ql_dump_ricb(struct ricb *ricb); +extern void ql_dump_cqicb(struct cqicb *cqicb); +extern void ql_dump_rx_ring(struct rx_ring *rx_ring); +extern void ql_dump_hw_cb(struct ql_adapter *qdev, int size, u32 bit, u16 q_id); +#define QL_DUMP_RICB(ricb) ql_dump_ricb(ricb) +#define QL_DUMP_WQICB(wqicb) ql_dump_wqicb(wqicb) +#define QL_DUMP_TX_RING(tx_ring) ql_dump_tx_ring(tx_ring) +#define QL_DUMP_CQICB(cqicb) ql_dump_cqicb(cqicb) +#define QL_DUMP_RX_RING(rx_ring) ql_dump_rx_ring(rx_ring) +#define QL_DUMP_HW_CB(qdev, size, bit, q_id) \ + ql_dump_hw_cb(qdev, size, bit, q_id) +#else +#define QL_DUMP_RICB(ricb) +#define QL_DUMP_WQICB(wqicb) +#define QL_DUMP_TX_RING(tx_ring) +#define QL_DUMP_CQICB(cqicb) +#define QL_DUMP_RX_RING(rx_ring) +#define QL_DUMP_HW_CB(qdev, size, bit, q_id) +#endif + +#ifdef QL_OB_DUMP +extern void ql_dump_tx_desc(struct tx_buf_desc *tbd); +extern void ql_dump_ob_mac_iocb(struct ob_mac_iocb_req *ob_mac_iocb); +extern void ql_dump_ob_mac_rsp(struct ob_mac_iocb_rsp *ob_mac_rsp); +#define QL_DUMP_OB_MAC_IOCB(ob_mac_iocb) ql_dump_ob_mac_iocb(ob_mac_iocb) +#define QL_DUMP_OB_MAC_RSP(ob_mac_rsp) ql_dump_ob_mac_rsp(ob_mac_rsp) +#else +#define QL_DUMP_OB_MAC_IOCB(ob_mac_iocb) +#define QL_DUMP_OB_MAC_RSP(ob_mac_rsp) +#endif + +#ifdef QL_IB_DUMP +extern void ql_dump_ib_mac_rsp(struct ib_mac_iocb_rsp *ib_mac_rsp); +#define QL_DUMP_IB_MAC_RSP(ib_mac_rsp) ql_dump_ib_mac_rsp(ib_mac_rsp) +#else +#define QL_DUMP_IB_MAC_RSP(ib_mac_rsp) +#endif + +#ifdef QL_ALL_DUMP +extern void ql_dump_all(struct ql_adapter *qdev); +#define QL_DUMP_ALL(qdev) ql_dump_all(qdev) +#else +#define QL_DUMP_ALL(qdev) +#endif + +#endif /* _QLGE_H_ */ diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c new file mode 100644 index 00000000000..f0392b16617 --- /dev/null +++ b/drivers/net/qlge/qlge_dbg.c @@ -0,0 +1,858 @@ +#include "qlge.h" + +#ifdef QL_REG_DUMP +static void ql_dump_intr_states(struct ql_adapter *qdev) +{ + int i; + u32 value; + for (i = 0; i < qdev->intr_count; i++) { + ql_write32(qdev, INTR_EN, qdev->intr_context[i].intr_read_mask); + value = ql_read32(qdev, INTR_EN); + printk(KERN_ERR PFX + "%s: Interrupt %d is %s.\n", + qdev->ndev->name, i, + (value & INTR_EN_EN ? "enabled" : "disabled")); + } +} + +void ql_dump_xgmac_control_regs(struct ql_adapter *qdev) +{ + u32 data; + if (ql_sem_spinlock(qdev, qdev->xg_sem_mask)) { + printk(KERN_ERR "%s: Couldn't get xgmac sem.\n", __func__); + return; + } + ql_read_xgmac_reg(qdev, PAUSE_SRC_LO, &data); + printk(KERN_ERR PFX "%s: PAUSE_SRC_LO = 0x%.08x.\n", qdev->ndev->name, + data); + ql_read_xgmac_reg(qdev, PAUSE_SRC_HI, &data); + printk(KERN_ERR PFX "%s: PAUSE_SRC_HI = 0x%.08x.\n", qdev->ndev->name, + data); + ql_read_xgmac_reg(qdev, GLOBAL_CFG, &data); + printk(KERN_ERR PFX "%s: GLOBAL_CFG = 0x%.08x.\n", qdev->ndev->name, + data); + ql_read_xgmac_reg(qdev, TX_CFG, &data); + printk(KERN_ERR PFX "%s: TX_CFG = 0x%.08x.\n", qdev->ndev->name, data); + ql_read_xgmac_reg(qdev, RX_CFG, &data); + printk(KERN_ERR PFX "%s: RX_CFG = 0x%.08x.\n", qdev->ndev->name, data); + ql_read_xgmac_reg(qdev, FLOW_CTL, &data); + printk(KERN_ERR PFX "%s: FLOW_CTL = 0x%.08x.\n", qdev->ndev->name, + data); + ql_read_xgmac_reg(qdev, PAUSE_OPCODE, &data); + printk(KERN_ERR PFX "%s: PAUSE_OPCODE = 0x%.08x.\n", qdev->ndev->name, + data); + ql_read_xgmac_reg(qdev, PAUSE_TIMER, &data); + printk(KERN_ERR PFX "%s: PAUSE_TIMER = 0x%.08x.\n", qdev->ndev->name, + data); + ql_read_xgmac_reg(qdev, PAUSE_FRM_DEST_LO, &data); + printk(KERN_ERR PFX "%s: PAUSE_FRM_DEST_LO = 0x%.08x.\n", + qdev->ndev->name, data); + ql_read_xgmac_reg(qdev, PAUSE_FRM_DEST_HI, &data); + printk(KERN_ERR PFX "%s: PAUSE_FRM_DEST_HI = 0x%.08x.\n", + qdev->ndev->name, data); + ql_read_xgmac_reg(qdev, MAC_TX_PARAMS, &data); + printk(KERN_ERR PFX "%s: MAC_TX_PARAMS = 0x%.08x.\n", qdev->ndev->name, + data); + ql_read_xgmac_reg(qdev, MAC_RX_PARAMS, &data); + printk(KERN_ERR PFX "%s: MAC_RX_PARAMS = 0x%.08x.\n", qdev->ndev->name, + data); + ql_read_xgmac_reg(qdev, MAC_SYS_INT, &data); + printk(KERN_ERR PFX "%s: MAC_SYS_INT = 0x%.08x.\n", qdev->ndev->name, + data); + ql_read_xgmac_reg(qdev, MAC_SYS_INT_MASK, &data); + printk(KERN_ERR PFX "%s: MAC_SYS_INT_MASK = 0x%.08x.\n", + qdev->ndev->name, data); + ql_read_xgmac_reg(qdev, MAC_MGMT_INT, &data); + printk(KERN_ERR PFX "%s: MAC_MGMT_INT = 0x%.08x.\n", qdev->ndev->name, + data); + ql_read_xgmac_reg(qdev, MAC_MGMT_IN_MASK, &data); + printk(KERN_ERR PFX "%s: MAC_MGMT_IN_MASK = 0x%.08x.\n", + qdev->ndev->name, data); + ql_read_xgmac_reg(qdev, EXT_ARB_MODE, &data); + printk(KERN_ERR PFX "%s: EXT_ARB_MODE = 0x%.08x.\n", qdev->ndev->name, + data); + ql_sem_unlock(qdev, qdev->xg_sem_mask); + +} + +static void ql_dump_ets_regs(struct ql_adapter *qdev) +{ +} + +static void ql_dump_cam_entries(struct ql_adapter *qdev) +{ + int i; + u32 value[3]; + for (i = 0; i < 4; i++) { + if (ql_get_mac_addr_reg(qdev, MAC_ADDR_TYPE_CAM_MAC, i, value)) { + printk(KERN_ERR PFX + "%s: Failed read of mac index register.\n", + __func__); + return; + } else { + if (value[0]) + printk(KERN_ERR PFX + "%s: CAM index %d CAM Lookup Lower = 0x%.08x:%.08x, Output = 0x%.08x.\n", + qdev->ndev->name, i, value[1], value[0], + value[2]); + } + } + for (i = 0; i < 32; i++) { + if (ql_get_mac_addr_reg + (qdev, MAC_ADDR_TYPE_MULTI_MAC, i, value)) { + printk(KERN_ERR PFX + "%s: Failed read of mac index register.\n", + __func__); + return; + } else { + if (value[0]) + printk(KERN_ERR PFX + "%s: MCAST index %d CAM Lookup Lower = 0x%.08x:%.08x.\n", + qdev->ndev->name, i, value[1], value[0]); + } + } +} + +void ql_dump_routing_entries(struct ql_adapter *qdev) +{ + int i; + u32 value; + for (i = 0; i < 16; i++) { + value = 0; + if (ql_get_routing_reg(qdev, i, &value)) { + printk(KERN_ERR PFX + "%s: Failed read of routing index register.\n", + __func__); + return; + } else { + if (value) + printk(KERN_ERR PFX + "%s: Routing Mask %d = 0x%.08x.\n", + qdev->ndev->name, i, value); + } + } +} + +void ql_dump_regs(struct ql_adapter *qdev) +{ + printk(KERN_ERR PFX "reg dump for function #%d.\n", qdev->func); + printk(KERN_ERR PFX "SYS = 0x%x.\n", + ql_read32(qdev, SYS)); + printk(KERN_ERR PFX "RST_FO = 0x%x.\n", + ql_read32(qdev, RST_FO)); + printk(KERN_ERR PFX "FSC = 0x%x.\n", + ql_read32(qdev, FSC)); + printk(KERN_ERR PFX "CSR = 0x%x.\n", + ql_read32(qdev, CSR)); + printk(KERN_ERR PFX "ICB_RID = 0x%x.\n", + ql_read32(qdev, ICB_RID)); + printk(KERN_ERR PFX "ICB_L = 0x%x.\n", + ql_read32(qdev, ICB_L)); + printk(KERN_ERR PFX "ICB_H = 0x%x.\n", + ql_read32(qdev, ICB_H)); + printk(KERN_ERR PFX "CFG = 0x%x.\n", + ql_read32(qdev, CFG)); + printk(KERN_ERR PFX "BIOS_ADDR = 0x%x.\n", + ql_read32(qdev, BIOS_ADDR)); + printk(KERN_ERR PFX "STS = 0x%x.\n", + ql_read32(qdev, STS)); + printk(KERN_ERR PFX "INTR_EN = 0x%x.\n", + ql_read32(qdev, INTR_EN)); + printk(KERN_ERR PFX "INTR_MASK = 0x%x.\n", + ql_read32(qdev, INTR_MASK)); + printk(KERN_ERR PFX "ISR1 = 0x%x.\n", + ql_read32(qdev, ISR1)); + printk(KERN_ERR PFX "ISR2 = 0x%x.\n", + ql_read32(qdev, ISR2)); + printk(KERN_ERR PFX "ISR3 = 0x%x.\n", + ql_read32(qdev, ISR3)); + printk(KERN_ERR PFX "ISR4 = 0x%x.\n", + ql_read32(qdev, ISR4)); + printk(KERN_ERR PFX "REV_ID = 0x%x.\n", + ql_read32(qdev, REV_ID)); + printk(KERN_ERR PFX "FRC_ECC_ERR = 0x%x.\n", + ql_read32(qdev, FRC_ECC_ERR)); + printk(KERN_ERR PFX "ERR_STS = 0x%x.\n", + ql_read32(qdev, ERR_STS)); + printk(KERN_ERR PFX "RAM_DBG_ADDR = 0x%x.\n", + ql_read32(qdev, RAM_DBG_ADDR)); + printk(KERN_ERR PFX "RAM_DBG_DATA = 0x%x.\n", + ql_read32(qdev, RAM_DBG_DATA)); + printk(KERN_ERR PFX "ECC_ERR_CNT = 0x%x.\n", + ql_read32(qdev, ECC_ERR_CNT)); + printk(KERN_ERR PFX "SEM = 0x%x.\n", + ql_read32(qdev, SEM)); + printk(KERN_ERR PFX "GPIO_1 = 0x%x.\n", + ql_read32(qdev, GPIO_1)); + printk(KERN_ERR PFX "GPIO_2 = 0x%x.\n", + ql_read32(qdev, GPIO_2)); + printk(KERN_ERR PFX "GPIO_3 = 0x%x.\n", + ql_read32(qdev, GPIO_3)); + printk(KERN_ERR PFX "XGMAC_ADDR = 0x%x.\n", + ql_read32(qdev, XGMAC_ADDR)); + printk(KERN_ERR PFX "XGMAC_DATA = 0x%x.\n", + ql_read32(qdev, XGMAC_DATA)); + printk(KERN_ERR PFX "NIC_ETS = 0x%x.\n", + ql_read32(qdev, NIC_ETS)); + printk(KERN_ERR PFX "CNA_ETS = 0x%x.\n", + ql_read32(qdev, CNA_ETS)); + printk(KERN_ERR PFX "FLASH_ADDR = 0x%x.\n", + ql_read32(qdev, FLASH_ADDR)); + printk(KERN_ERR PFX "FLASH_DATA = 0x%x.\n", + ql_read32(qdev, FLASH_DATA)); + printk(KERN_ERR PFX "CQ_STOP = 0x%x.\n", + ql_read32(qdev, CQ_STOP)); + printk(KERN_ERR PFX "PAGE_TBL_RID = 0x%x.\n", + ql_read32(qdev, PAGE_TBL_RID)); + printk(KERN_ERR PFX "WQ_PAGE_TBL_LO = 0x%x.\n", + ql_read32(qdev, WQ_PAGE_TBL_LO)); + printk(KERN_ERR PFX "WQ_PAGE_TBL_HI = 0x%x.\n", + ql_read32(qdev, WQ_PAGE_TBL_HI)); + printk(KERN_ERR PFX "CQ_PAGE_TBL_LO = 0x%x.\n", + ql_read32(qdev, CQ_PAGE_TBL_LO)); + printk(KERN_ERR PFX "CQ_PAGE_TBL_HI = 0x%x.\n", + ql_read32(qdev, CQ_PAGE_TBL_HI)); + printk(KERN_ERR PFX "COS_DFLT_CQ1 = 0x%x.\n", + ql_read32(qdev, COS_DFLT_CQ1)); + printk(KERN_ERR PFX "COS_DFLT_CQ2 = 0x%x.\n", + ql_read32(qdev, COS_DFLT_CQ2)); + printk(KERN_ERR PFX "SPLT_HDR = 0x%x.\n", + ql_read32(qdev, SPLT_HDR)); + printk(KERN_ERR PFX "FC_PAUSE_THRES = 0x%x.\n", + ql_read32(qdev, FC_PAUSE_THRES)); + printk(KERN_ERR PFX "NIC_PAUSE_THRES = 0x%x.\n", + ql_read32(qdev, NIC_PAUSE_THRES)); + printk(KERN_ERR PFX "FC_ETHERTYPE = 0x%x.\n", + ql_read32(qdev, FC_ETHERTYPE)); + printk(KERN_ERR PFX "FC_RCV_CFG = 0x%x.\n", + ql_read32(qdev, FC_RCV_CFG)); + printk(KERN_ERR PFX "NIC_RCV_CFG = 0x%x.\n", + ql_read32(qdev, NIC_RCV_CFG)); + printk(KERN_ERR PFX "FC_COS_TAGS = 0x%x.\n", + ql_read32(qdev, FC_COS_TAGS)); + printk(KERN_ERR PFX "NIC_COS_TAGS = 0x%x.\n", + ql_read32(qdev, NIC_COS_TAGS)); + printk(KERN_ERR PFX "MGMT_RCV_CFG = 0x%x.\n", + ql_read32(qdev, MGMT_RCV_CFG)); + printk(KERN_ERR PFX "XG_SERDES_ADDR = 0x%x.\n", + ql_read32(qdev, XG_SERDES_ADDR)); + printk(KERN_ERR PFX "XG_SERDES_DATA = 0x%x.\n", + ql_read32(qdev, XG_SERDES_DATA)); + printk(KERN_ERR PFX "PRB_MX_ADDR = 0x%x.\n", + ql_read32(qdev, PRB_MX_ADDR)); + printk(KERN_ERR PFX "PRB_MX_DATA = 0x%x.\n", + ql_read32(qdev, PRB_MX_DATA)); + ql_dump_intr_states(qdev); + ql_dump_xgmac_control_regs(qdev); + ql_dump_ets_regs(qdev); + ql_dump_cam_entries(qdev); + ql_dump_routing_entries(qdev); +} +#endif + +#ifdef QL_STAT_DUMP +void ql_dump_stat(struct ql_adapter *qdev) +{ + printk(KERN_ERR "%s: Enter.\n", __func__); + printk(KERN_ERR "tx_pkts = %ld\n", + (unsigned long)qdev->nic_stats.tx_pkts); + printk(KERN_ERR "tx_bytes = %ld\n", + (unsigned long)qdev->nic_stats.tx_bytes); + printk(KERN_ERR "tx_mcast_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.tx_mcast_pkts); + printk(KERN_ERR "tx_bcast_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.tx_bcast_pkts); + printk(KERN_ERR "tx_ucast_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.tx_ucast_pkts); + printk(KERN_ERR "tx_ctl_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.tx_ctl_pkts); + printk(KERN_ERR "tx_pause_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.tx_pause_pkts); + printk(KERN_ERR "tx_64_pkt = %ld.\n", + (unsigned long)qdev->nic_stats.tx_64_pkt); + printk(KERN_ERR "tx_65_to_127_pkt = %ld.\n", + (unsigned long)qdev->nic_stats.tx_65_to_127_pkt); + printk(KERN_ERR "tx_128_to_255_pkt = %ld.\n", + (unsigned long)qdev->nic_stats.tx_128_to_255_pkt); + printk(KERN_ERR "tx_256_511_pkt = %ld.\n", + (unsigned long)qdev->nic_stats.tx_256_511_pkt); + printk(KERN_ERR "tx_512_to_1023_pkt = %ld.\n", + (unsigned long)qdev->nic_stats.tx_512_to_1023_pkt); + printk(KERN_ERR "tx_1024_to_1518_pkt = %ld.\n", + (unsigned long)qdev->nic_stats.tx_1024_to_1518_pkt); + printk(KERN_ERR "tx_1519_to_max_pkt = %ld.\n", + (unsigned long)qdev->nic_stats.tx_1519_to_max_pkt); + printk(KERN_ERR "tx_undersize_pkt = %ld.\n", + (unsigned long)qdev->nic_stats.tx_undersize_pkt); + printk(KERN_ERR "tx_oversize_pkt = %ld.\n", + (unsigned long)qdev->nic_stats.tx_oversize_pkt); + printk(KERN_ERR "rx_bytes = %ld.\n", + (unsigned long)qdev->nic_stats.rx_bytes); + printk(KERN_ERR "rx_bytes_ok = %ld.\n", + (unsigned long)qdev->nic_stats.rx_bytes_ok); + printk(KERN_ERR "rx_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_pkts); + printk(KERN_ERR "rx_pkts_ok = %ld.\n", + (unsigned long)qdev->nic_stats.rx_pkts_ok); + printk(KERN_ERR "rx_bcast_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_bcast_pkts); + printk(KERN_ERR "rx_mcast_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_mcast_pkts); + printk(KERN_ERR "rx_ucast_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_ucast_pkts); + printk(KERN_ERR "rx_undersize_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_undersize_pkts); + printk(KERN_ERR "rx_oversize_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_oversize_pkts); + printk(KERN_ERR "rx_jabber_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_jabber_pkts); + printk(KERN_ERR "rx_undersize_fcerr_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_undersize_fcerr_pkts); + printk(KERN_ERR "rx_drop_events = %ld.\n", + (unsigned long)qdev->nic_stats.rx_drop_events); + printk(KERN_ERR "rx_fcerr_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_fcerr_pkts); + printk(KERN_ERR "rx_align_err = %ld.\n", + (unsigned long)qdev->nic_stats.rx_align_err); + printk(KERN_ERR "rx_symbol_err = %ld.\n", + (unsigned long)qdev->nic_stats.rx_symbol_err); + printk(KERN_ERR "rx_mac_err = %ld.\n", + (unsigned long)qdev->nic_stats.rx_mac_err); + printk(KERN_ERR "rx_ctl_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_ctl_pkts); + printk(KERN_ERR "rx_pause_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_pause_pkts); + printk(KERN_ERR "rx_64_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_64_pkts); + printk(KERN_ERR "rx_65_to_127_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_65_to_127_pkts); + printk(KERN_ERR "rx_128_255_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_128_255_pkts); + printk(KERN_ERR "rx_256_511_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_256_511_pkts); + printk(KERN_ERR "rx_512_to_1023_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_512_to_1023_pkts); + printk(KERN_ERR "rx_1024_to_1518_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_1024_to_1518_pkts); + printk(KERN_ERR "rx_1519_to_max_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_1519_to_max_pkts); + printk(KERN_ERR "rx_len_err_pkts = %ld.\n", + (unsigned long)qdev->nic_stats.rx_len_err_pkts); +}; +#endif + +#ifdef QL_DEV_DUMP +void ql_dump_qdev(struct ql_adapter *qdev) +{ + int i; + printk(KERN_ERR PFX "qdev->flags = %lx.\n", + qdev->flags); + printk(KERN_ERR PFX "qdev->vlgrp = %p.\n", + qdev->vlgrp); + printk(KERN_ERR PFX "qdev->pdev = %p.\n", + qdev->pdev); + printk(KERN_ERR PFX "qdev->ndev = %p.\n", + qdev->ndev); + printk(KERN_ERR PFX "qdev->chip_rev_id = %d.\n", + qdev->chip_rev_id); + printk(KERN_ERR PFX "qdev->reg_base = %p.\n", + qdev->reg_base); + printk(KERN_ERR PFX "qdev->doorbell_area = %p.\n", + qdev->doorbell_area); + printk(KERN_ERR PFX "qdev->doorbell_area_size = %d.\n", + qdev->doorbell_area_size); + printk(KERN_ERR PFX "msg_enable = %x.\n", + qdev->msg_enable); + printk(KERN_ERR PFX "qdev->rx_ring_shadow_reg_area = %p.\n", + qdev->rx_ring_shadow_reg_area); + printk(KERN_ERR PFX "qdev->rx_ring_shadow_reg_dma = %p.\n", + (void *)qdev->rx_ring_shadow_reg_dma); + printk(KERN_ERR PFX "qdev->tx_ring_shadow_reg_area = %p.\n", + qdev->tx_ring_shadow_reg_area); + printk(KERN_ERR PFX "qdev->tx_ring_shadow_reg_dma = %p.\n", + (void *)qdev->tx_ring_shadow_reg_dma); + printk(KERN_ERR PFX "qdev->intr_count = %d.\n", + qdev->intr_count); + if (qdev->msi_x_entry) + for (i = 0; i < qdev->intr_count; i++) { + printk(KERN_ERR PFX + "msi_x_entry.[%d]vector = %d.\n", i, + qdev->msi_x_entry[i].vector); + printk(KERN_ERR PFX + "msi_x_entry.[%d]entry = %d.\n", i, + qdev->msi_x_entry[i].entry); + } + for (i = 0; i < qdev->intr_count; i++) { + printk(KERN_ERR PFX + "intr_context[%d].qdev = %p.\n", i, + qdev->intr_context[i].qdev); + printk(KERN_ERR PFX + "intr_context[%d].intr = %d.\n", i, + qdev->intr_context[i].intr); + printk(KERN_ERR PFX + "intr_context[%d].hooked = %d.\n", i, + qdev->intr_context[i].hooked); + printk(KERN_ERR PFX + "intr_context[%d].intr_en_mask = 0x%08x.\n", i, + qdev->intr_context[i].intr_en_mask); + printk(KERN_ERR PFX + "intr_context[%d].intr_dis_mask = 0x%08x.\n", i, + qdev->intr_context[i].intr_dis_mask); + printk(KERN_ERR PFX + "intr_context[%d].intr_read_mask = 0x%08x.\n", i, + qdev->intr_context[i].intr_read_mask); + } + printk(KERN_ERR PFX "qdev->tx_ring_count = %d.\n", qdev->tx_ring_count); + printk(KERN_ERR PFX "qdev->rx_ring_count = %d.\n", qdev->rx_ring_count); + printk(KERN_ERR PFX "qdev->ring_mem_size = %d.\n", qdev->ring_mem_size); + printk(KERN_ERR PFX "qdev->ring_mem = %p.\n", qdev->ring_mem); + printk(KERN_ERR PFX "qdev->intr_count = %d.\n", qdev->intr_count); + printk(KERN_ERR PFX "qdev->tx_ring = %p.\n", + qdev->tx_ring); + printk(KERN_ERR PFX "qdev->rss_ring_first_cq_id = %d.\n", + qdev->rss_ring_first_cq_id); + printk(KERN_ERR PFX "qdev->rss_ring_count = %d.\n", + qdev->rss_ring_count); + printk(KERN_ERR PFX "qdev->rx_ring = %p.\n", qdev->rx_ring); + printk(KERN_ERR PFX "qdev->default_rx_queue = %d.\n", + qdev->default_rx_queue); + printk(KERN_ERR PFX "qdev->xg_sem_mask = 0x%08x.\n", + qdev->xg_sem_mask); + printk(KERN_ERR PFX "qdev->port_link_up = 0x%08x.\n", + qdev->port_link_up); + printk(KERN_ERR PFX "qdev->port_init = 0x%08x.\n", + qdev->port_init); + +} +#endif + +#ifdef QL_CB_DUMP +void ql_dump_wqicb(struct wqicb *wqicb) +{ + printk(KERN_ERR PFX "Dumping wqicb stuff...\n"); + printk(KERN_ERR PFX "wqicb->len = 0x%x.\n", le16_to_cpu(wqicb->len)); + printk(KERN_ERR PFX "wqicb->flags = %x.\n", le16_to_cpu(wqicb->flags)); + printk(KERN_ERR PFX "wqicb->cq_id_rss = %d.\n", + le16_to_cpu(wqicb->cq_id_rss)); + printk(KERN_ERR PFX "wqicb->rid = 0x%x.\n", le16_to_cpu(wqicb->rid)); + printk(KERN_ERR PFX "wqicb->wq_addr_lo = 0x%.08x.\n", + le32_to_cpu(wqicb->addr_lo)); + printk(KERN_ERR PFX "wqicb->wq_addr_hi = 0x%.08x.\n", + le32_to_cpu(wqicb->addr_hi)); + printk(KERN_ERR PFX "wqicb->wq_cnsmr_idx_addr_lo = 0x%.08x.\n", + le32_to_cpu(wqicb->cnsmr_idx_addr_lo)); + printk(KERN_ERR PFX "wqicb->wq_cnsmr_idx_addr_hi = 0x%.08x.\n", + le32_to_cpu(wqicb->cnsmr_idx_addr_hi)); +} + +void ql_dump_tx_ring(struct tx_ring *tx_ring) +{ + if (tx_ring == NULL) + return; + printk(KERN_ERR PFX + "===================== Dumping tx_ring %d ===============.\n", + tx_ring->wq_id); + printk(KERN_ERR PFX "tx_ring->base = %p.\n", tx_ring->wq_base); + printk(KERN_ERR PFX "tx_ring->base_dma = 0x%llx.\n", + (u64) tx_ring->wq_base_dma); + printk(KERN_ERR PFX "tx_ring->cnsmr_idx_sh_reg = %p.\n", + tx_ring->cnsmr_idx_sh_reg); + printk(KERN_ERR PFX "tx_ring->cnsmr_idx_sh_reg_dma = 0x%llx.\n", + (u64) tx_ring->cnsmr_idx_sh_reg_dma); + printk(KERN_ERR PFX "tx_ring->size = %d.\n", tx_ring->wq_size); + printk(KERN_ERR PFX "tx_ring->len = %d.\n", tx_ring->wq_len); + printk(KERN_ERR PFX "tx_ring->prod_idx_db_reg = %p.\n", + tx_ring->prod_idx_db_reg); + printk(KERN_ERR PFX "tx_ring->valid_db_reg = %p.\n", + tx_ring->valid_db_reg); + printk(KERN_ERR PFX "tx_ring->prod_idx = %d.\n", tx_ring->prod_idx); + printk(KERN_ERR PFX "tx_ring->cq_id = %d.\n", tx_ring->cq_id); + printk(KERN_ERR PFX "tx_ring->wq_id = %d.\n", tx_ring->wq_id); + printk(KERN_ERR PFX "tx_ring->q = %p.\n", tx_ring->q); + printk(KERN_ERR PFX "tx_ring->tx_count = %d.\n", + atomic_read(&tx_ring->tx_count)); +} + +void ql_dump_ricb(struct ricb *ricb) +{ + int i; + printk(KERN_ERR PFX + "===================== Dumping ricb ===============.\n"); + printk(KERN_ERR PFX "Dumping ricb stuff...\n"); + + printk(KERN_ERR PFX "ricb->base_cq = %d.\n", ricb->base_cq & 0x1f); + printk(KERN_ERR PFX "ricb->flags = %s%s%s%s%s%s%s%s%s.\n", + ricb->base_cq & RSS_L4K ? "RSS_L4K " : "", + ricb->flags & RSS_L6K ? "RSS_L6K " : "", + ricb->flags & RSS_LI ? "RSS_LI " : "", + ricb->flags & RSS_LB ? "RSS_LB " : "", + ricb->flags & RSS_LM ? "RSS_LM " : "", + ricb->flags & RSS_RI4 ? "RSS_RI4 " : "", + ricb->flags & RSS_RT4 ? "RSS_RT4 " : "", + ricb->flags & RSS_RI6 ? "RSS_RI6 " : "", + ricb->flags & RSS_RT6 ? "RSS_RT6 " : ""); + printk(KERN_ERR PFX "ricb->mask = 0x%.04x.\n", le16_to_cpu(ricb->mask)); + for (i = 0; i < 16; i++) + printk(KERN_ERR PFX "ricb->hash_cq_id[%d] = 0x%.08x.\n", i, + le32_to_cpu(ricb->hash_cq_id[i])); + for (i = 0; i < 10; i++) + printk(KERN_ERR PFX "ricb->ipv6_hash_key[%d] = 0x%.08x.\n", i, + le32_to_cpu(ricb->ipv6_hash_key[i])); + for (i = 0; i < 4; i++) + printk(KERN_ERR PFX "ricb->ipv4_hash_key[%d] = 0x%.08x.\n", i, + le32_to_cpu(ricb->ipv4_hash_key[i])); +} + +void ql_dump_cqicb(struct cqicb *cqicb) +{ + printk(KERN_ERR PFX "Dumping cqicb stuff...\n"); + + printk(KERN_ERR PFX "cqicb->msix_vect = %d.\n", cqicb->msix_vect); + printk(KERN_ERR PFX "cqicb->flags = %x.\n", cqicb->flags); + printk(KERN_ERR PFX "cqicb->len = %d.\n", le16_to_cpu(cqicb->len)); + printk(KERN_ERR PFX "cqicb->addr_lo = %x.\n", + le32_to_cpu(cqicb->addr_lo)); + printk(KERN_ERR PFX "cqicb->addr_hi = %x.\n", + le32_to_cpu(cqicb->addr_hi)); + printk(KERN_ERR PFX "cqicb->prod_idx_addr_lo = %x.\n", + le32_to_cpu(cqicb->prod_idx_addr_lo)); + printk(KERN_ERR PFX "cqicb->prod_idx_addr_hi = %x.\n", + le32_to_cpu(cqicb->prod_idx_addr_hi)); + printk(KERN_ERR PFX "cqicb->pkt_delay = 0x%.04x.\n", + le16_to_cpu(cqicb->pkt_delay)); + printk(KERN_ERR PFX "cqicb->irq_delay = 0x%.04x.\n", + le16_to_cpu(cqicb->irq_delay)); + printk(KERN_ERR PFX "cqicb->lbq_addr_lo = %x.\n", + le32_to_cpu(cqicb->lbq_addr_lo)); + printk(KERN_ERR PFX "cqicb->lbq_addr_hi = %x.\n", + le32_to_cpu(cqicb->lbq_addr_hi)); + printk(KERN_ERR PFX "cqicb->lbq_buf_size = 0x%.04x.\n", + le16_to_cpu(cqicb->lbq_buf_size)); + printk(KERN_ERR PFX "cqicb->lbq_len = 0x%.04x.\n", + le16_to_cpu(cqicb->lbq_len)); + printk(KERN_ERR PFX "cqicb->sbq_addr_lo = %x.\n", + le32_to_cpu(cqicb->sbq_addr_lo)); + printk(KERN_ERR PFX "cqicb->sbq_addr_hi = %x.\n", + le32_to_cpu(cqicb->sbq_addr_hi)); + printk(KERN_ERR PFX "cqicb->sbq_buf_size = 0x%.04x.\n", + le16_to_cpu(cqicb->sbq_buf_size)); + printk(KERN_ERR PFX "cqicb->sbq_len = 0x%.04x.\n", + le16_to_cpu(cqicb->sbq_len)); +} + +void ql_dump_rx_ring(struct rx_ring *rx_ring) +{ + if (rx_ring == NULL) + return; + printk(KERN_ERR PFX + "===================== Dumping rx_ring %d ===============.\n", + rx_ring->cq_id); + printk(KERN_ERR PFX "Dumping rx_ring %d, type = %s%s%s.\n", + rx_ring->cq_id, rx_ring->type == DEFAULT_Q ? "DEFAULT" : "", + rx_ring->type == TX_Q ? "OUTBOUND COMPLETIONS" : "", + rx_ring->type == RX_Q ? "INBOUND_COMPLETIONS" : ""); + printk(KERN_ERR PFX "rx_ring->cqicb = %p.\n", &rx_ring->cqicb); + printk(KERN_ERR PFX "rx_ring->cq_base = %p.\n", rx_ring->cq_base); + printk(KERN_ERR PFX "rx_ring->cq_base_dma = %llx.\n", + (u64) rx_ring->cq_base_dma); + printk(KERN_ERR PFX "rx_ring->cq_size = %d.\n", rx_ring->cq_size); + printk(KERN_ERR PFX "rx_ring->cq_len = %d.\n", rx_ring->cq_len); + printk(KERN_ERR PFX + "rx_ring->prod_idx_sh_reg, addr = %p, value = %d.\n", + rx_ring->prod_idx_sh_reg, + rx_ring->prod_idx_sh_reg ? *(rx_ring->prod_idx_sh_reg) : 0); + printk(KERN_ERR PFX "rx_ring->prod_idx_sh_reg_dma = %llx.\n", + (u64) rx_ring->prod_idx_sh_reg_dma); + printk(KERN_ERR PFX "rx_ring->cnsmr_idx_db_reg = %p.\n", + rx_ring->cnsmr_idx_db_reg); + printk(KERN_ERR PFX "rx_ring->cnsmr_idx = %d.\n", rx_ring->cnsmr_idx); + printk(KERN_ERR PFX "rx_ring->curr_entry = %p.\n", rx_ring->curr_entry); + printk(KERN_ERR PFX "rx_ring->valid_db_reg = %p.\n", + rx_ring->valid_db_reg); + + printk(KERN_ERR PFX "rx_ring->lbq_base = %p.\n", rx_ring->lbq_base); + printk(KERN_ERR PFX "rx_ring->lbq_base_dma = %llx.\n", + (u64) rx_ring->lbq_base_dma); + printk(KERN_ERR PFX "rx_ring->lbq_base_indirect = %p.\n", + rx_ring->lbq_base_indirect); + printk(KERN_ERR PFX "rx_ring->lbq_base_indirect_dma = %llx.\n", + (u64) rx_ring->lbq_base_indirect_dma); + printk(KERN_ERR PFX "rx_ring->lbq = %p.\n", rx_ring->lbq); + printk(KERN_ERR PFX "rx_ring->lbq_len = %d.\n", rx_ring->lbq_len); + printk(KERN_ERR PFX "rx_ring->lbq_size = %d.\n", rx_ring->lbq_size); + printk(KERN_ERR PFX "rx_ring->lbq_prod_idx_db_reg = %p.\n", + rx_ring->lbq_prod_idx_db_reg); + printk(KERN_ERR PFX "rx_ring->lbq_prod_idx = %d.\n", + rx_ring->lbq_prod_idx); + printk(KERN_ERR PFX "rx_ring->lbq_curr_idx = %d.\n", + rx_ring->lbq_curr_idx); + printk(KERN_ERR PFX "rx_ring->lbq_clean_idx = %d.\n", + rx_ring->lbq_clean_idx); + printk(KERN_ERR PFX "rx_ring->lbq_free_cnt = %d.\n", + rx_ring->lbq_free_cnt); + printk(KERN_ERR PFX "rx_ring->lbq_buf_size = %d.\n", + rx_ring->lbq_buf_size); + + printk(KERN_ERR PFX "rx_ring->sbq_base = %p.\n", rx_ring->sbq_base); + printk(KERN_ERR PFX "rx_ring->sbq_base_dma = %llx.\n", + (u64) rx_ring->sbq_base_dma); + printk(KERN_ERR PFX "rx_ring->sbq_base_indirect = %p.\n", + rx_ring->sbq_base_indirect); + printk(KERN_ERR PFX "rx_ring->sbq_base_indirect_dma = %llx.\n", + (u64) rx_ring->sbq_base_indirect_dma); + printk(KERN_ERR PFX "rx_ring->sbq = %p.\n", rx_ring->sbq); + printk(KERN_ERR PFX "rx_ring->sbq_len = %d.\n", rx_ring->sbq_len); + printk(KERN_ERR PFX "rx_ring->sbq_size = %d.\n", rx_ring->sbq_size); + printk(KERN_ERR PFX "rx_ring->sbq_prod_idx_db_reg addr = %p.\n", + rx_ring->sbq_prod_idx_db_reg); + printk(KERN_ERR PFX "rx_ring->sbq_prod_idx = %d.\n", + rx_ring->sbq_prod_idx); + printk(KERN_ERR PFX "rx_ring->sbq_curr_idx = %d.\n", + rx_ring->sbq_curr_idx); + printk(KERN_ERR PFX "rx_ring->sbq_clean_idx = %d.\n", + rx_ring->sbq_clean_idx); + printk(KERN_ERR PFX "rx_ring->sbq_free_cnt = %d.\n", + rx_ring->sbq_free_cnt); + printk(KERN_ERR PFX "rx_ring->sbq_buf_size = %d.\n", + rx_ring->sbq_buf_size); + printk(KERN_ERR PFX "rx_ring->cq_id = %d.\n", rx_ring->cq_id); + printk(KERN_ERR PFX "rx_ring->irq = %d.\n", rx_ring->irq); + printk(KERN_ERR PFX "rx_ring->cpu = %d.\n", rx_ring->cpu); + printk(KERN_ERR PFX "rx_ring->qdev = %p.\n", rx_ring->qdev); +} + +void ql_dump_hw_cb(struct ql_adapter *qdev, int size, u32 bit, u16 q_id) +{ + void *ptr; + + printk(KERN_ERR PFX "%s: Enter.\n", __func__); + + ptr = kmalloc(size, GFP_ATOMIC); + if (ptr == NULL) { + printk(KERN_ERR PFX "%s: Couldn't allocate a buffer.\n", + __func__); + return; + } + + if (ql_write_cfg(qdev, ptr, size, bit, q_id)) { + printk(KERN_ERR "%s: Failed to upload control block!\n", + __func__); + goto fail_it; + } + switch (bit) { + case CFG_DRQ: + ql_dump_wqicb((struct wqicb *)ptr); + break; + case CFG_DCQ: + ql_dump_cqicb((struct cqicb *)ptr); + break; + case CFG_DR: + ql_dump_ricb((struct ricb *)ptr); + break; + default: + printk(KERN_ERR PFX "%s: Invalid bit value = %x.\n", + __func__, bit); + break; + } +fail_it: + kfree(ptr); +} +#endif + +#ifdef QL_OB_DUMP +void ql_dump_tx_desc(struct tx_buf_desc *tbd) +{ + printk(KERN_ERR PFX "tbd->addr = 0x%llx\n", + le64_to_cpu((u64) tbd->addr)); + printk(KERN_ERR PFX "tbd->len = %d\n", + le32_to_cpu(tbd->len & TX_DESC_LEN_MASK)); + printk(KERN_ERR PFX "tbd->flags = %s %s\n", + tbd->len & TX_DESC_C ? "C" : ".", + tbd->len & TX_DESC_E ? "E" : "."); + tbd++; + printk(KERN_ERR PFX "tbd->addr = 0x%llx\n", + le64_to_cpu((u64) tbd->addr)); + printk(KERN_ERR PFX "tbd->len = %d\n", + le32_to_cpu(tbd->len & TX_DESC_LEN_MASK)); + printk(KERN_ERR PFX "tbd->flags = %s %s\n", + tbd->len & TX_DESC_C ? "C" : ".", + tbd->len & TX_DESC_E ? "E" : "."); + tbd++; + printk(KERN_ERR PFX "tbd->addr = 0x%llx\n", + le64_to_cpu((u64) tbd->addr)); + printk(KERN_ERR PFX "tbd->len = %d\n", + le32_to_cpu(tbd->len & TX_DESC_LEN_MASK)); + printk(KERN_ERR PFX "tbd->flags = %s %s\n", + tbd->len & TX_DESC_C ? "C" : ".", + tbd->len & TX_DESC_E ? "E" : "."); + +} + +void ql_dump_ob_mac_iocb(struct ob_mac_iocb_req *ob_mac_iocb) +{ + struct ob_mac_tso_iocb_req *ob_mac_tso_iocb = + (struct ob_mac_tso_iocb_req *)ob_mac_iocb; + struct tx_buf_desc *tbd; + u16 frame_len; + + printk(KERN_ERR PFX "%s\n", __func__); + printk(KERN_ERR PFX "opcode = %s\n", + (ob_mac_iocb->opcode == OPCODE_OB_MAC_IOCB) ? "MAC" : "TSO"); + printk(KERN_ERR PFX "flags1 = %s %s %s %s %s\n", + ob_mac_tso_iocb->flags1 & OB_MAC_TSO_IOCB_OI ? "OI" : "", + ob_mac_tso_iocb->flags1 & OB_MAC_TSO_IOCB_I ? "I" : "", + ob_mac_tso_iocb->flags1 & OB_MAC_TSO_IOCB_D ? "D" : "", + ob_mac_tso_iocb->flags1 & OB_MAC_TSO_IOCB_IP4 ? "IP4" : "", + ob_mac_tso_iocb->flags1 & OB_MAC_TSO_IOCB_IP6 ? "IP6" : ""); + printk(KERN_ERR PFX "flags2 = %s %s %s\n", + ob_mac_tso_iocb->flags2 & OB_MAC_TSO_IOCB_LSO ? "LSO" : "", + ob_mac_tso_iocb->flags2 & OB_MAC_TSO_IOCB_UC ? "UC" : "", + ob_mac_tso_iocb->flags2 & OB_MAC_TSO_IOCB_TC ? "TC" : ""); + printk(KERN_ERR PFX "flags3 = %s %s %s \n", + ob_mac_tso_iocb->flags3 & OB_MAC_TSO_IOCB_IC ? "IC" : "", + ob_mac_tso_iocb->flags3 & OB_MAC_TSO_IOCB_DFP ? "DFP" : "", + ob_mac_tso_iocb->flags3 & OB_MAC_TSO_IOCB_V ? "V" : ""); + printk(KERN_ERR PFX "tid = %x\n", ob_mac_iocb->tid); + printk(KERN_ERR PFX "txq_idx = %d\n", ob_mac_iocb->txq_idx); + printk(KERN_ERR PFX "vlan_tci = %x\n", ob_mac_tso_iocb->vlan_tci); + if (ob_mac_iocb->opcode == OPCODE_OB_MAC_TSO_IOCB) { + printk(KERN_ERR PFX "frame_len = %d\n", + le32_to_cpu(ob_mac_tso_iocb->frame_len)); + printk(KERN_ERR PFX "mss = %d\n", + le16_to_cpu(ob_mac_tso_iocb->mss)); + printk(KERN_ERR PFX "prot_hdr_len = %d\n", + le16_to_cpu(ob_mac_tso_iocb->total_hdrs_len)); + printk(KERN_ERR PFX "hdr_offset = 0x%.04x\n", + le16_to_cpu(ob_mac_tso_iocb->net_trans_offset)); + frame_len = le32_to_cpu(ob_mac_tso_iocb->frame_len); + } else { + printk(KERN_ERR PFX "frame_len = %d\n", + le16_to_cpu(ob_mac_iocb->frame_len)); + frame_len = le16_to_cpu(ob_mac_iocb->frame_len); + } + tbd = &ob_mac_iocb->tbd[0]; + ql_dump_tx_desc(tbd); +} + +void ql_dump_ob_mac_rsp(struct ob_mac_iocb_rsp *ob_mac_rsp) +{ + printk(KERN_ERR PFX "%s\n", __func__); + printk(KERN_ERR PFX "opcode = %d\n", ob_mac_rsp->opcode); + printk(KERN_ERR PFX "flags = %s %s %s %s %s %s %s\n", + ob_mac_rsp->flags1 & OB_MAC_IOCB_RSP_OI ? "OI" : ".", + ob_mac_rsp->flags1 & OB_MAC_IOCB_RSP_I ? "I" : ".", + ob_mac_rsp->flags1 & OB_MAC_IOCB_RSP_E ? "E" : ".", + ob_mac_rsp->flags1 & OB_MAC_IOCB_RSP_S ? "S" : ".", + ob_mac_rsp->flags1 & OB_MAC_IOCB_RSP_L ? "L" : ".", + ob_mac_rsp->flags1 & OB_MAC_IOCB_RSP_P ? "P" : ".", + ob_mac_rsp->flags2 & OB_MAC_IOCB_RSP_B ? "B" : "."); + printk(KERN_ERR PFX "tid = %x\n", ob_mac_rsp->tid); +} +#endif + +#ifdef QL_IB_DUMP +void ql_dump_ib_mac_rsp(struct ib_mac_iocb_rsp *ib_mac_rsp) +{ + printk(KERN_ERR PFX "%s\n", __func__); + printk(KERN_ERR PFX "opcode = 0x%x\n", ib_mac_rsp->opcode); + printk(KERN_ERR PFX "flags1 = %s%s%s%s%s%s\n", + ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_OI ? "OI " : "", + ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_I ? "I " : "", + ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_TE ? "TE " : "", + ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_NU ? "NU " : "", + ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_IE ? "IE " : "", + ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_B ? "B " : ""); + + if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) + printk(KERN_ERR PFX "%s%s%s Multicast.\n", + (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) == + IB_MAC_IOCB_RSP_M_HASH ? "Hash" : "", + (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) == + IB_MAC_IOCB_RSP_M_REG ? "Registered" : "", + (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) == + IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : ""); + + printk(KERN_ERR PFX "flags2 = %s%s%s%s%s\n", + (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) ? "P " : "", + (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ? "V " : "", + (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) ? "U " : "", + (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) ? "T " : "", + (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_FO) ? "FO " : ""); + + if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) + printk(KERN_ERR PFX "%s%s%s%s%s error.\n", + (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) == + IB_MAC_IOCB_RSP_ERR_OVERSIZE ? "oversize" : "", + (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) == + IB_MAC_IOCB_RSP_ERR_UNDERSIZE ? "undersize" : "", + (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) == + IB_MAC_IOCB_RSP_ERR_PREAMBLE ? "preamble" : "", + (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) == + IB_MAC_IOCB_RSP_ERR_FRAME_LEN ? "frame length" : "", + (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) == + IB_MAC_IOCB_RSP_ERR_CRC ? "CRC" : ""); + + printk(KERN_ERR PFX "flags3 = %s%s.\n", + ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DS ? "DS " : "", + ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL ? "DL " : ""); + + if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_RSS_MASK) + printk(KERN_ERR PFX "RSS flags = %s%s%s%s.\n", + ((ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_RSS_MASK) == + IB_MAC_IOCB_RSP_M_IPV4) ? "IPv4 RSS" : "", + ((ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_RSS_MASK) == + IB_MAC_IOCB_RSP_M_IPV6) ? "IPv6 RSS " : "", + ((ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_RSS_MASK) == + IB_MAC_IOCB_RSP_M_TCP_V4) ? "TCP/IPv4 RSS" : "", + ((ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_RSS_MASK) == + IB_MAC_IOCB_RSP_M_TCP_V6) ? "TCP/IPv6 RSS" : ""); + + printk(KERN_ERR PFX "data_len = %d\n", + le32_to_cpu(ib_mac_rsp->data_len)); + printk(KERN_ERR PFX "data_addr_hi = 0x%x\n", + le32_to_cpu(ib_mac_rsp->data_addr_hi)); + printk(KERN_ERR PFX "data_addr_lo = 0x%x\n", + le32_to_cpu(ib_mac_rsp->data_addr_lo)); + if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_RSS_MASK) + printk(KERN_ERR PFX "rss = %x\n", + le32_to_cpu(ib_mac_rsp->rss)); + if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) + printk(KERN_ERR PFX "vlan_id = %x\n", + le16_to_cpu(ib_mac_rsp->vlan_id)); + + printk(KERN_ERR PFX "flags4 = %s%s%s.\n", + le32_to_cpu(ib_mac_rsp-> + flags4) & IB_MAC_IOCB_RSP_HV ? "HV " : "", + le32_to_cpu(ib_mac_rsp-> + flags4) & IB_MAC_IOCB_RSP_HS ? "HS " : "", + le32_to_cpu(ib_mac_rsp-> + flags4) & IB_MAC_IOCB_RSP_HL ? "HL " : ""); + + if (le32_to_cpu(ib_mac_rsp->flags4) & IB_MAC_IOCB_RSP_HV) { + printk(KERN_ERR PFX "hdr length = %d.\n", + le32_to_cpu(ib_mac_rsp->hdr_len)); + printk(KERN_ERR PFX "hdr addr_hi = 0x%x.\n", + le32_to_cpu(ib_mac_rsp->hdr_addr_hi)); + printk(KERN_ERR PFX "hdr addr_lo = 0x%x.\n", + le32_to_cpu(ib_mac_rsp->hdr_addr_lo)); + } +} +#endif + +#ifdef QL_ALL_DUMP +void ql_dump_all(struct ql_adapter *qdev) +{ + int i; + + QL_DUMP_REGS(qdev); + QL_DUMP_QDEV(qdev); + for (i = 0; i < qdev->tx_ring_count; i++) { + QL_DUMP_TX_RING(&qdev->tx_ring[i]); + QL_DUMP_WQICB((struct wqicb *)&qdev->tx_ring[i]); + } + for (i = 0; i < qdev->rx_ring_count; i++) { + QL_DUMP_RX_RING(&qdev->rx_ring[i]); + QL_DUMP_CQICB((struct cqicb *)&qdev->rx_ring[i]); + } +} +#endif diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c new file mode 100644 index 00000000000..6457f8c4fda --- /dev/null +++ b/drivers/net/qlge/qlge_ethtool.c @@ -0,0 +1,415 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "qlge.h" + +static int ql_update_ring_coalescing(struct ql_adapter *qdev) +{ + int i, status = 0; + struct rx_ring *rx_ring; + struct cqicb *cqicb; + + if (!netif_running(qdev->ndev)) + return status; + + spin_lock(&qdev->hw_lock); + /* Skip the default queue, and update the outbound handler + * queues if they changed. + */ + cqicb = (struct cqicb *)&qdev->rx_ring[1]; + if (le16_to_cpu(cqicb->irq_delay) != qdev->tx_coalesce_usecs || + le16_to_cpu(cqicb->pkt_delay) != qdev->tx_max_coalesced_frames) { + for (i = 1; i < qdev->rss_ring_first_cq_id; i++, rx_ring++) { + rx_ring = &qdev->rx_ring[i]; + cqicb = (struct cqicb *)rx_ring; + cqicb->irq_delay = le16_to_cpu(qdev->tx_coalesce_usecs); + cqicb->pkt_delay = + le16_to_cpu(qdev->tx_max_coalesced_frames); + cqicb->flags = FLAGS_LI; + status = ql_write_cfg(qdev, cqicb, sizeof(cqicb), + CFG_LCQ, rx_ring->cq_id); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Failed to load CQICB.\n"); + goto exit; + } + } + } + + /* Update the inbound (RSS) handler queues if they changed. */ + cqicb = (struct cqicb *)&qdev->rx_ring[qdev->rss_ring_first_cq_id]; + if (le16_to_cpu(cqicb->irq_delay) != qdev->rx_coalesce_usecs || + le16_to_cpu(cqicb->pkt_delay) != qdev->rx_max_coalesced_frames) { + for (i = qdev->rss_ring_first_cq_id; + i <= qdev->rss_ring_first_cq_id + qdev->rss_ring_count; + i++) { + rx_ring = &qdev->rx_ring[i]; + cqicb = (struct cqicb *)rx_ring; + cqicb->irq_delay = le16_to_cpu(qdev->rx_coalesce_usecs); + cqicb->pkt_delay = + le16_to_cpu(qdev->rx_max_coalesced_frames); + cqicb->flags = FLAGS_LI; + status = ql_write_cfg(qdev, cqicb, sizeof(cqicb), + CFG_LCQ, rx_ring->cq_id); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Failed to load CQICB.\n"); + goto exit; + } + } + } +exit: + spin_unlock(&qdev->hw_lock); + return status; +} + +void ql_update_stats(struct ql_adapter *qdev) +{ + u32 i; + u64 data; + u64 *iter = &qdev->nic_stats.tx_pkts; + + spin_lock(&qdev->stats_lock); + if (ql_sem_spinlock(qdev, qdev->xg_sem_mask)) { + QPRINTK(qdev, DRV, ERR, + "Couldn't get xgmac sem.\n"); + goto quit; + } + /* + * Get TX statistics. + */ + for (i = 0x200; i < 0x280; i += 8) { + if (ql_read_xgmac_reg64(qdev, i, &data)) { + QPRINTK(qdev, DRV, ERR, + "Error reading status register 0x%.04x.\n", i); + goto end; + } else + *iter = data; + iter++; + } + + /* + * Get RX statistics. + */ + for (i = 0x300; i < 0x3d0; i += 8) { + if (ql_read_xgmac_reg64(qdev, i, &data)) { + QPRINTK(qdev, DRV, ERR, + "Error reading status register 0x%.04x.\n", i); + goto end; + } else + *iter = data; + iter++; + } + +end: + ql_sem_unlock(qdev, qdev->xg_sem_mask); +quit: + spin_unlock(&qdev->stats_lock); + + QL_DUMP_STAT(qdev); + + return; +} + +static char ql_stats_str_arr[][ETH_GSTRING_LEN] = { + {"tx_pkts"}, + {"tx_bytes"}, + {"tx_mcast_pkts"}, + {"tx_bcast_pkts"}, + {"tx_ucast_pkts"}, + {"tx_ctl_pkts"}, + {"tx_pause_pkts"}, + {"tx_64_pkts"}, + {"tx_65_to_127_pkts"}, + {"tx_128_to_255_pkts"}, + {"tx_256_511_pkts"}, + {"tx_512_to_1023_pkts"}, + {"tx_1024_to_1518_pkts"}, + {"tx_1519_to_max_pkts"}, + {"tx_undersize_pkts"}, + {"tx_oversize_pkts"}, + {"rx_bytes"}, + {"rx_bytes_ok"}, + {"rx_pkts"}, + {"rx_pkts_ok"}, + {"rx_bcast_pkts"}, + {"rx_mcast_pkts"}, + {"rx_ucast_pkts"}, + {"rx_undersize_pkts"}, + {"rx_oversize_pkts"}, + {"rx_jabber_pkts"}, + {"rx_undersize_fcerr_pkts"}, + {"rx_drop_events"}, + {"rx_fcerr_pkts"}, + {"rx_align_err"}, + {"rx_symbol_err"}, + {"rx_mac_err"}, + {"rx_ctl_pkts"}, + {"rx_pause_pkts"}, + {"rx_64_pkts"}, + {"rx_65_to_127_pkts"}, + {"rx_128_255_pkts"}, + {"rx_256_511_pkts"}, + {"rx_512_to_1023_pkts"}, + {"rx_1024_to_1518_pkts"}, + {"rx_1519_to_max_pkts"}, + {"rx_len_err_pkts"}, +}; + +static void ql_get_strings(struct net_device *dev, u32 stringset, u8 *buf) +{ + switch (stringset) { + case ETH_SS_STATS: + memcpy(buf, ql_stats_str_arr, sizeof(ql_stats_str_arr)); + break; + } +} + +static int ql_get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(ql_stats_str_arr); + default: + return -EOPNOTSUPP; + } +} + +static void +ql_get_ethtool_stats(struct net_device *ndev, + struct ethtool_stats *stats, u64 *data) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + struct nic_stats *s = &qdev->nic_stats; + + ql_update_stats(qdev); + + *data++ = s->tx_pkts; + *data++ = s->tx_bytes; + *data++ = s->tx_mcast_pkts; + *data++ = s->tx_bcast_pkts; + *data++ = s->tx_ucast_pkts; + *data++ = s->tx_ctl_pkts; + *data++ = s->tx_pause_pkts; + *data++ = s->tx_64_pkt; + *data++ = s->tx_65_to_127_pkt; + *data++ = s->tx_128_to_255_pkt; + *data++ = s->tx_256_511_pkt; + *data++ = s->tx_512_to_1023_pkt; + *data++ = s->tx_1024_to_1518_pkt; + *data++ = s->tx_1519_to_max_pkt; + *data++ = s->tx_undersize_pkt; + *data++ = s->tx_oversize_pkt; + *data++ = s->rx_bytes; + *data++ = s->rx_bytes_ok; + *data++ = s->rx_pkts; + *data++ = s->rx_pkts_ok; + *data++ = s->rx_bcast_pkts; + *data++ = s->rx_mcast_pkts; + *data++ = s->rx_ucast_pkts; + *data++ = s->rx_undersize_pkts; + *data++ = s->rx_oversize_pkts; + *data++ = s->rx_jabber_pkts; + *data++ = s->rx_undersize_fcerr_pkts; + *data++ = s->rx_drop_events; + *data++ = s->rx_fcerr_pkts; + *data++ = s->rx_align_err; + *data++ = s->rx_symbol_err; + *data++ = s->rx_mac_err; + *data++ = s->rx_ctl_pkts; + *data++ = s->rx_pause_pkts; + *data++ = s->rx_64_pkts; + *data++ = s->rx_65_to_127_pkts; + *data++ = s->rx_128_255_pkts; + *data++ = s->rx_256_511_pkts; + *data++ = s->rx_512_to_1023_pkts; + *data++ = s->rx_1024_to_1518_pkts; + *data++ = s->rx_1519_to_max_pkts; + *data++ = s->rx_len_err_pkts; +} + +static int ql_get_settings(struct net_device *ndev, + struct ethtool_cmd *ecmd) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + + ecmd->supported = SUPPORTED_10000baseT_Full; + ecmd->advertising = ADVERTISED_10000baseT_Full; + ecmd->autoneg = AUTONEG_ENABLE; + ecmd->transceiver = XCVR_EXTERNAL; + if ((qdev->link_status & LINK_TYPE_MASK) == LINK_TYPE_10GBASET) { + ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg); + ecmd->advertising |= (ADVERTISED_TP | ADVERTISED_Autoneg); + ecmd->port = PORT_TP; + } else { + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->port = PORT_FIBRE; + } + + ecmd->speed = SPEED_10000; + ecmd->duplex = DUPLEX_FULL; + + return 0; +} + +static void ql_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *drvinfo) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + strncpy(drvinfo->driver, qlge_driver_name, 32); + strncpy(drvinfo->version, qlge_driver_version, 32); + strncpy(drvinfo->fw_version, "N/A", 32); + strncpy(drvinfo->bus_info, pci_name(qdev->pdev), 32); + drvinfo->n_stats = 0; + drvinfo->testinfo_len = 0; + drvinfo->regdump_len = 0; + drvinfo->eedump_len = 0; +} + +static int ql_get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + struct ql_adapter *qdev = netdev_priv(dev); + + c->rx_coalesce_usecs = qdev->rx_coalesce_usecs; + c->tx_coalesce_usecs = qdev->tx_coalesce_usecs; + + /* This chip coalesces as follows: + * If a packet arrives, hold off interrupts until + * cqicb->int_delay expires, but if no other packets arrive don't + * wait longer than cqicb->pkt_int_delay. But ethtool doesn't use a + * timer to coalesce on a frame basis. So, we have to take ethtool's + * max_coalesced_frames value and convert it to a delay in microseconds. + * We do this by using a basic thoughput of 1,000,000 frames per + * second @ (1024 bytes). This means one frame per usec. So it's a + * simple one to one ratio. + */ + c->rx_max_coalesced_frames = qdev->rx_max_coalesced_frames; + c->tx_max_coalesced_frames = qdev->tx_max_coalesced_frames; + + return 0; +} + +static int ql_set_coalesce(struct net_device *ndev, struct ethtool_coalesce *c) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + + /* Validate user parameters. */ + if (c->rx_coalesce_usecs > qdev->rx_ring_size / 2) + return -EINVAL; + /* Don't wait more than 10 usec. */ + if (c->rx_max_coalesced_frames > MAX_INTER_FRAME_WAIT) + return -EINVAL; + if (c->tx_coalesce_usecs > qdev->tx_ring_size / 2) + return -EINVAL; + if (c->tx_max_coalesced_frames > MAX_INTER_FRAME_WAIT) + return -EINVAL; + + /* Verify a change took place before updating the hardware. */ + if (qdev->rx_coalesce_usecs == c->rx_coalesce_usecs && + qdev->tx_coalesce_usecs == c->tx_coalesce_usecs && + qdev->rx_max_coalesced_frames == c->rx_max_coalesced_frames && + qdev->tx_max_coalesced_frames == c->tx_max_coalesced_frames) + return 0; + + qdev->rx_coalesce_usecs = c->rx_coalesce_usecs; + qdev->tx_coalesce_usecs = c->tx_coalesce_usecs; + qdev->rx_max_coalesced_frames = c->rx_max_coalesced_frames; + qdev->tx_max_coalesced_frames = c->tx_max_coalesced_frames; + + return ql_update_ring_coalescing(qdev); +} + +static u32 ql_get_rx_csum(struct net_device *netdev) +{ + struct ql_adapter *qdev = netdev_priv(netdev); + return qdev->rx_csum; +} + +static int ql_set_rx_csum(struct net_device *netdev, uint32_t data) +{ + struct ql_adapter *qdev = netdev_priv(netdev); + qdev->rx_csum = data; + return 0; +} + +static int ql_set_tso(struct net_device *ndev, uint32_t data) +{ + + if (data) { + ndev->features |= NETIF_F_TSO; + ndev->features |= NETIF_F_TSO6; + } else { + ndev->features &= ~NETIF_F_TSO; + ndev->features &= ~NETIF_F_TSO6; + } + return 0; +} + +static u32 ql_get_msglevel(struct net_device *ndev) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + return qdev->msg_enable; +} + +static void ql_set_msglevel(struct net_device *ndev, u32 value) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + qdev->msg_enable = value; +} + +const struct ethtool_ops qlge_ethtool_ops = { + .get_settings = ql_get_settings, + .get_drvinfo = ql_get_drvinfo, + .get_msglevel = ql_get_msglevel, + .set_msglevel = ql_set_msglevel, + .get_link = ethtool_op_get_link, + .get_rx_csum = ql_get_rx_csum, + .set_rx_csum = ql_set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = ql_set_tso, + .get_coalesce = ql_get_coalesce, + .set_coalesce = ql_set_coalesce, + .get_sset_count = ql_get_sset_count, + .get_strings = ql_get_strings, + .get_ethtool_stats = ql_get_ethtool_stats, +}; + diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c new file mode 100644 index 00000000000..ad878e2b9de --- /dev/null +++ b/drivers/net/qlge/qlge_main.c @@ -0,0 +1,3954 @@ +/* + * QLogic qlge NIC HBA Driver + * Copyright (c) 2003-2008 QLogic Corporation + * See LICENSE.qlge for copyright and licensing details. + * Author: Linux qlge network device driver by + * Ron Mercer + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "qlge.h" + +char qlge_driver_name[] = DRV_NAME; +const char qlge_driver_version[] = DRV_VERSION; + +MODULE_AUTHOR("Ron Mercer "); +MODULE_DESCRIPTION(DRV_STRING " "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +static const u32 default_msg = + NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | +/* NETIF_MSG_TIMER | */ + NETIF_MSG_IFDOWN | + NETIF_MSG_IFUP | + NETIF_MSG_RX_ERR | + NETIF_MSG_TX_ERR | + NETIF_MSG_TX_QUEUED | + NETIF_MSG_INTR | NETIF_MSG_TX_DONE | NETIF_MSG_RX_STATUS | +/* NETIF_MSG_PKTDATA | */ + NETIF_MSG_HW | NETIF_MSG_WOL | 0; + +static int debug = 0x00007fff; /* defaults above */ +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + +#define MSIX_IRQ 0 +#define MSI_IRQ 1 +#define LEG_IRQ 2 +static int irq_type = MSIX_IRQ; +module_param(irq_type, int, MSIX_IRQ); +MODULE_PARM_DESC(irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy."); + +static struct pci_device_id qlge_pci_tbl[] __devinitdata = { + {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID)}, + {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID1)}, + /* required last entry */ + {0,} +}; + +MODULE_DEVICE_TABLE(pci, qlge_pci_tbl); + +/* This hardware semaphore causes exclusive access to + * resources shared between the NIC driver, MPI firmware, + * FCOE firmware and the FC driver. + */ +static int ql_sem_trylock(struct ql_adapter *qdev, u32 sem_mask) +{ + u32 sem_bits = 0; + + switch (sem_mask) { + case SEM_XGMAC0_MASK: + sem_bits = SEM_SET << SEM_XGMAC0_SHIFT; + break; + case SEM_XGMAC1_MASK: + sem_bits = SEM_SET << SEM_XGMAC1_SHIFT; + break; + case SEM_ICB_MASK: + sem_bits = SEM_SET << SEM_ICB_SHIFT; + break; + case SEM_MAC_ADDR_MASK: + sem_bits = SEM_SET << SEM_MAC_ADDR_SHIFT; + break; + case SEM_FLASH_MASK: + sem_bits = SEM_SET << SEM_FLASH_SHIFT; + break; + case SEM_PROBE_MASK: + sem_bits = SEM_SET << SEM_PROBE_SHIFT; + break; + case SEM_RT_IDX_MASK: + sem_bits = SEM_SET << SEM_RT_IDX_SHIFT; + break; + case SEM_PROC_REG_MASK: + sem_bits = SEM_SET << SEM_PROC_REG_SHIFT; + break; + default: + QPRINTK(qdev, PROBE, ALERT, "Bad Semaphore mask!.\n"); + return -EINVAL; + } + + ql_write32(qdev, SEM, sem_bits | sem_mask); + return !(ql_read32(qdev, SEM) & sem_bits); +} + +int ql_sem_spinlock(struct ql_adapter *qdev, u32 sem_mask) +{ + unsigned int seconds = 3; + do { + if (!ql_sem_trylock(qdev, sem_mask)) + return 0; + ssleep(1); + } while (--seconds); + return -ETIMEDOUT; +} + +void ql_sem_unlock(struct ql_adapter *qdev, u32 sem_mask) +{ + ql_write32(qdev, SEM, sem_mask); + ql_read32(qdev, SEM); /* flush */ +} + +/* This function waits for a specific bit to come ready + * in a given register. It is used mostly by the initialize + * process, but is also used in kernel thread API such as + * netdev->set_multi, netdev->set_mac_address, netdev->vlan_rx_add_vid. + */ +int ql_wait_reg_rdy(struct ql_adapter *qdev, u32 reg, u32 bit, u32 err_bit) +{ + u32 temp; + int count = UDELAY_COUNT; + + while (count) { + temp = ql_read32(qdev, reg); + + /* check for errors */ + if (temp & err_bit) { + QPRINTK(qdev, PROBE, ALERT, + "register 0x%.08x access error, value = 0x%.08x!.\n", + reg, temp); + return -EIO; + } else if (temp & bit) + return 0; + udelay(UDELAY_DELAY); + count--; + } + QPRINTK(qdev, PROBE, ALERT, + "Timed out waiting for reg %x to come ready.\n", reg); + return -ETIMEDOUT; +} + +/* The CFG register is used to download TX and RX control blocks + * to the chip. This function waits for an operation to complete. + */ +static int ql_wait_cfg(struct ql_adapter *qdev, u32 bit) +{ + int count = UDELAY_COUNT; + u32 temp; + + while (count) { + temp = ql_read32(qdev, CFG); + if (temp & CFG_LE) + return -EIO; + if (!(temp & bit)) + return 0; + udelay(UDELAY_DELAY); + count--; + } + return -ETIMEDOUT; +} + + +/* Used to issue init control blocks to hw. Maps control block, + * sets address, triggers download, waits for completion. + */ +int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit, + u16 q_id) +{ + u64 map; + int status = 0; + int direction; + u32 mask; + u32 value; + + direction = + (bit & (CFG_LRQ | CFG_LR | CFG_LCQ)) ? PCI_DMA_TODEVICE : + PCI_DMA_FROMDEVICE; + + map = pci_map_single(qdev->pdev, ptr, size, direction); + if (pci_dma_mapping_error(qdev->pdev, map)) { + QPRINTK(qdev, IFUP, ERR, "Couldn't map DMA area.\n"); + return -ENOMEM; + } + + status = ql_wait_cfg(qdev, bit); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Timed out waiting for CFG to come ready.\n"); + goto exit; + } + + status = ql_sem_spinlock(qdev, SEM_ICB_MASK); + if (status) + goto exit; + ql_write32(qdev, ICB_L, (u32) map); + ql_write32(qdev, ICB_H, (u32) (map >> 32)); + ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */ + + mask = CFG_Q_MASK | (bit << 16); + value = bit | (q_id << CFG_Q_SHIFT); + ql_write32(qdev, CFG, (mask | value)); + + /* + * Wait for the bit to clear after signaling hw. + */ + status = ql_wait_cfg(qdev, bit); +exit: + pci_unmap_single(qdev->pdev, map, size, direction); + return status; +} + +/* Get a specific MAC address from the CAM. Used for debug and reg dump. */ +int ql_get_mac_addr_reg(struct ql_adapter *qdev, u32 type, u16 index, + u32 *value) +{ + u32 offset = 0; + int status; + + status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); + if (status) + return status; + switch (type) { + case MAC_ADDR_TYPE_MULTI_MAC: + case MAC_ADDR_TYPE_CAM_MAC: + { + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */ + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MR, MAC_ADDR_E); + if (status) + goto exit; + *value++ = ql_read32(qdev, MAC_ADDR_DATA); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */ + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MR, MAC_ADDR_E); + if (status) + goto exit; + *value++ = ql_read32(qdev, MAC_ADDR_DATA); + if (type == MAC_ADDR_TYPE_CAM_MAC) { + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */ + status = + ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, + MAC_ADDR_MR, MAC_ADDR_E); + if (status) + goto exit; + *value++ = ql_read32(qdev, MAC_ADDR_DATA); + } + break; + } + case MAC_ADDR_TYPE_VLAN: + case MAC_ADDR_TYPE_MULTI_FLTR: + default: + QPRINTK(qdev, IFUP, CRIT, + "Address type %d not yet supported.\n", type); + status = -EPERM; + } +exit: + ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); + return status; +} + +/* Set up a MAC, multicast or VLAN address for the + * inbound frame matching. + */ +static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type, + u16 index) +{ + u32 offset = 0; + int status = 0; + + status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); + if (status) + return status; + switch (type) { + case MAC_ADDR_TYPE_MULTI_MAC: + case MAC_ADDR_TYPE_CAM_MAC: + { + u32 cam_output; + u32 upper = (addr[0] << 8) | addr[1]; + u32 lower = + (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) | + (addr[5]); + + QPRINTK(qdev, IFUP, INFO, + "Adding %s address %02x:%02x:%02x:%02x:%02x:%02x" + " at index %d in the CAM.\n", + ((type == + MAC_ADDR_TYPE_MULTI_MAC) ? "MULTICAST" : + "UNICAST"), addr[0], addr[1], addr[2], addr[3], + addr[4], addr[5], index); + + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + type); /* type */ + ql_write32(qdev, MAC_ADDR_DATA, lower); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + type); /* type */ + ql_write32(qdev, MAC_ADDR_DATA, upper); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + type); /* type */ + /* This field should also include the queue id + and possibly the function id. Right now we hardcode + the route field to NIC core. + */ + if (type == MAC_ADDR_TYPE_CAM_MAC) { + cam_output = (CAM_OUT_ROUTE_NIC | + (qdev-> + func << CAM_OUT_FUNC_SHIFT) | + (qdev-> + rss_ring_first_cq_id << + CAM_OUT_CQ_ID_SHIFT)); + if (qdev->vlgrp) + cam_output |= CAM_OUT_RV; + /* route to NIC core */ + ql_write32(qdev, MAC_ADDR_DATA, cam_output); + } + break; + } + case MAC_ADDR_TYPE_VLAN: + { + u32 enable_bit = *((u32 *) &addr[0]); + /* For VLAN, the addr actually holds a bit that + * either enables or disables the vlan id we are + * addressing. It's either MAC_ADDR_E on or off. + * That's bit-27 we're talking about. + */ + QPRINTK(qdev, IFUP, INFO, "%s VLAN ID %d %s the CAM.\n", + (enable_bit ? "Adding" : "Removing"), + index, (enable_bit ? "to" : "from")); + + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, offset | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + type | /* type */ + enable_bit); /* enable/disable */ + break; + } + case MAC_ADDR_TYPE_MULTI_FLTR: + default: + QPRINTK(qdev, IFUP, CRIT, + "Address type %d not yet supported.\n", type); + status = -EPERM; + } +exit: + ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); + return status; +} + +/* Get a specific frame routing value from the CAM. + * Used for debug and reg dump. + */ +int ql_get_routing_reg(struct ql_adapter *qdev, u32 index, u32 *value) +{ + int status = 0; + + status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); + if (status) + goto exit; + + status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, RT_IDX_E); + if (status) + goto exit; + + ql_write32(qdev, RT_IDX, + RT_IDX_TYPE_NICQ | RT_IDX_RS | (index << RT_IDX_IDX_SHIFT)); + status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MR, RT_IDX_E); + if (status) + goto exit; + *value = ql_read32(qdev, RT_DATA); +exit: + ql_sem_unlock(qdev, SEM_RT_IDX_MASK); + return status; +} + +/* The NIC function for this chip has 16 routing indexes. Each one can be used + * to route different frame types to various inbound queues. We send broadcast/ + * multicast/error frames to the default queue for slow handling, + * and CAM hit/RSS frames to the fast handling queues. + */ +static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask, + int enable) +{ + int status; + u32 value = 0; + + status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); + if (status) + return status; + + QPRINTK(qdev, IFUP, DEBUG, + "%s %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s mask %s the routing reg.\n", + (enable ? "Adding" : "Removing"), + ((index == RT_IDX_ALL_ERR_SLOT) ? "MAC ERROR/ALL ERROR" : ""), + ((index == RT_IDX_IP_CSUM_ERR_SLOT) ? "IP CSUM ERROR" : ""), + ((index == + RT_IDX_TCP_UDP_CSUM_ERR_SLOT) ? "TCP/UDP CSUM ERROR" : ""), + ((index == RT_IDX_BCAST_SLOT) ? "BROADCAST" : ""), + ((index == RT_IDX_MCAST_MATCH_SLOT) ? "MULTICAST MATCH" : ""), + ((index == RT_IDX_ALLMULTI_SLOT) ? "ALL MULTICAST MATCH" : ""), + ((index == RT_IDX_UNUSED6_SLOT) ? "UNUSED6" : ""), + ((index == RT_IDX_UNUSED7_SLOT) ? "UNUSED7" : ""), + ((index == RT_IDX_RSS_MATCH_SLOT) ? "RSS ALL/IPV4 MATCH" : ""), + ((index == RT_IDX_RSS_IPV6_SLOT) ? "RSS IPV6" : ""), + ((index == RT_IDX_RSS_TCP4_SLOT) ? "RSS TCP4" : ""), + ((index == RT_IDX_RSS_TCP6_SLOT) ? "RSS TCP6" : ""), + ((index == RT_IDX_CAM_HIT_SLOT) ? "CAM HIT" : ""), + ((index == RT_IDX_UNUSED013) ? "UNUSED13" : ""), + ((index == RT_IDX_UNUSED014) ? "UNUSED14" : ""), + ((index == RT_IDX_PROMISCUOUS_SLOT) ? "PROMISCUOUS" : ""), + (enable ? "to" : "from")); + + switch (mask) { + case RT_IDX_CAM_HIT: + { + value = RT_IDX_DST_CAM_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_CAM_HIT_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_VALID: /* Promiscuous Mode frames. */ + { + value = RT_IDX_DST_DFLT_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_PROMISCUOUS_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_ERR: /* Pass up MAC,IP,TCP/UDP error frames. */ + { + value = RT_IDX_DST_DFLT_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_ALL_ERR_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_BCAST: /* Pass up Broadcast frames to default Q. */ + { + value = RT_IDX_DST_DFLT_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_BCAST_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_MCAST: /* Pass up All Multicast frames. */ + { + value = RT_IDX_DST_CAM_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_MCAST_MATCH: /* Pass up matched Multicast frames. */ + { + value = RT_IDX_DST_CAM_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_RSS_MATCH: /* Pass up matched RSS frames. */ + { + value = RT_IDX_DST_RSS | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_RSS_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case 0: /* Clear the E-bit on an entry. */ + { + value = RT_IDX_DST_DFLT_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (index << RT_IDX_IDX_SHIFT);/* index */ + break; + } + default: + QPRINTK(qdev, IFUP, ERR, "Mask type %d not yet supported.\n", + mask); + status = -EPERM; + goto exit; + } + + if (value) { + status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, 0); + if (status) + goto exit; + value |= (enable ? RT_IDX_E : 0); + ql_write32(qdev, RT_IDX, value); + ql_write32(qdev, RT_DATA, enable ? mask : 0); + } +exit: + ql_sem_unlock(qdev, SEM_RT_IDX_MASK); + return status; +} + +static void ql_enable_interrupts(struct ql_adapter *qdev) +{ + ql_write32(qdev, INTR_EN, (INTR_EN_EI << 16) | INTR_EN_EI); +} + +static void ql_disable_interrupts(struct ql_adapter *qdev) +{ + ql_write32(qdev, INTR_EN, (INTR_EN_EI << 16)); +} + +/* If we're running with multiple MSI-X vectors then we enable on the fly. + * Otherwise, we may have multiple outstanding workers and don't want to + * enable until the last one finishes. In this case, the irq_cnt gets + * incremented everytime we queue a worker and decremented everytime + * a worker finishes. Once it hits zero we enable the interrupt. + */ +void ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr) +{ + if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) + ql_write32(qdev, INTR_EN, + qdev->intr_context[intr].intr_en_mask); + else { + if (qdev->legacy_check) + spin_lock(&qdev->legacy_lock); + if (atomic_dec_and_test(&qdev->intr_context[intr].irq_cnt)) { + QPRINTK(qdev, INTR, ERR, "Enabling interrupt %d.\n", + intr); + ql_write32(qdev, INTR_EN, + qdev->intr_context[intr].intr_en_mask); + } else { + QPRINTK(qdev, INTR, ERR, + "Skip enable, other queue(s) are active.\n"); + } + if (qdev->legacy_check) + spin_unlock(&qdev->legacy_lock); + } +} + +static u32 ql_disable_completion_interrupt(struct ql_adapter *qdev, u32 intr) +{ + u32 var = 0; + + if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) + goto exit; + else if (!atomic_read(&qdev->intr_context[intr].irq_cnt)) { + ql_write32(qdev, INTR_EN, + qdev->intr_context[intr].intr_dis_mask); + var = ql_read32(qdev, STS); + } + atomic_inc(&qdev->intr_context[intr].irq_cnt); +exit: + return var; +} + +static void ql_enable_all_completion_interrupts(struct ql_adapter *qdev) +{ + int i; + for (i = 0; i < qdev->intr_count; i++) { + /* The enable call does a atomic_dec_and_test + * and enables only if the result is zero. + * So we precharge it here. + */ + atomic_set(&qdev->intr_context[i].irq_cnt, 1); + ql_enable_completion_interrupt(qdev, i); + } + +} + +int ql_read_flash_word(struct ql_adapter *qdev, int offset, u32 *data) +{ + int status = 0; + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, + FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR); + if (status) + goto exit; + /* set up for reg read */ + ql_write32(qdev, FLASH_ADDR, FLASH_ADDR_R | offset); + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, + FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR); + if (status) + goto exit; + /* get the data */ + *data = ql_read32(qdev, FLASH_DATA); +exit: + return status; +} + +static int ql_get_flash_params(struct ql_adapter *qdev) +{ + int i; + int status; + u32 *p = (u32 *)&qdev->flash; + + if (ql_sem_spinlock(qdev, SEM_FLASH_MASK)) + return -ETIMEDOUT; + + for (i = 0; i < sizeof(qdev->flash) / sizeof(u32); i++, p++) { + status = ql_read_flash_word(qdev, i, p); + if (status) { + QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n"); + goto exit; + } + + } +exit: + ql_sem_unlock(qdev, SEM_FLASH_MASK); + return status; +} + +/* xgmac register are located behind the xgmac_addr and xgmac_data + * register pair. Each read/write requires us to wait for the ready + * bit before reading/writing the data. + */ +static int ql_write_xgmac_reg(struct ql_adapter *qdev, u32 reg, u32 data) +{ + int status; + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, + XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME); + if (status) + return status; + /* write the data to the data reg */ + ql_write32(qdev, XGMAC_DATA, data); + /* trigger the write */ + ql_write32(qdev, XGMAC_ADDR, reg); + return status; +} + +/* xgmac register are located behind the xgmac_addr and xgmac_data + * register pair. Each read/write requires us to wait for the ready + * bit before reading/writing the data. + */ +int ql_read_xgmac_reg(struct ql_adapter *qdev, u32 reg, u32 *data) +{ + int status = 0; + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, + XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME); + if (status) + goto exit; + /* set up for reg read */ + ql_write32(qdev, XGMAC_ADDR, reg | XGMAC_ADDR_R); + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, + XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME); + if (status) + goto exit; + /* get the data */ + *data = ql_read32(qdev, XGMAC_DATA); +exit: + return status; +} + +/* This is used for reading the 64-bit statistics regs. */ +int ql_read_xgmac_reg64(struct ql_adapter *qdev, u32 reg, u64 *data) +{ + int status = 0; + u32 hi = 0; + u32 lo = 0; + + status = ql_read_xgmac_reg(qdev, reg, &lo); + if (status) + goto exit; + + status = ql_read_xgmac_reg(qdev, reg + 4, &hi); + if (status) + goto exit; + + *data = (u64) lo | ((u64) hi << 32); + +exit: + return status; +} + +/* Take the MAC Core out of reset. + * Enable statistics counting. + * Take the transmitter/receiver out of reset. + * This functionality may be done in the MPI firmware at a + * later date. + */ +static int ql_port_initialize(struct ql_adapter *qdev) +{ + int status = 0; + u32 data; + + if (ql_sem_trylock(qdev, qdev->xg_sem_mask)) { + /* Another function has the semaphore, so + * wait for the port init bit to come ready. + */ + QPRINTK(qdev, LINK, INFO, + "Another function has the semaphore, so wait for the port init bit to come ready.\n"); + status = ql_wait_reg_rdy(qdev, STS, qdev->port_init, 0); + if (status) { + QPRINTK(qdev, LINK, CRIT, + "Port initialize timed out.\n"); + } + return status; + } + + QPRINTK(qdev, LINK, INFO, "Got xgmac semaphore!.\n"); + /* Set the core reset. */ + status = ql_read_xgmac_reg(qdev, GLOBAL_CFG, &data); + if (status) + goto end; + data |= GLOBAL_CFG_RESET; + status = ql_write_xgmac_reg(qdev, GLOBAL_CFG, data); + if (status) + goto end; + + /* Clear the core reset and turn on jumbo for receiver. */ + data &= ~GLOBAL_CFG_RESET; /* Clear core reset. */ + data |= GLOBAL_CFG_JUMBO; /* Turn on jumbo. */ + data |= GLOBAL_CFG_TX_STAT_EN; + data |= GLOBAL_CFG_RX_STAT_EN; + status = ql_write_xgmac_reg(qdev, GLOBAL_CFG, data); + if (status) + goto end; + + /* Enable transmitter, and clear it's reset. */ + status = ql_read_xgmac_reg(qdev, TX_CFG, &data); + if (status) + goto end; + data &= ~TX_CFG_RESET; /* Clear the TX MAC reset. */ + data |= TX_CFG_EN; /* Enable the transmitter. */ + status = ql_write_xgmac_reg(qdev, TX_CFG, data); + if (status) + goto end; + + /* Enable receiver and clear it's reset. */ + status = ql_read_xgmac_reg(qdev, RX_CFG, &data); + if (status) + goto end; + data &= ~RX_CFG_RESET; /* Clear the RX MAC reset. */ + data |= RX_CFG_EN; /* Enable the receiver. */ + status = ql_write_xgmac_reg(qdev, RX_CFG, data); + if (status) + goto end; + + /* Turn on jumbo. */ + status = + ql_write_xgmac_reg(qdev, MAC_TX_PARAMS, MAC_TX_PARAMS_JUMBO | (0x2580 << 16)); + if (status) + goto end; + status = + ql_write_xgmac_reg(qdev, MAC_RX_PARAMS, 0x2580); + if (status) + goto end; + + /* Signal to the world that the port is enabled. */ + ql_write32(qdev, STS, ((qdev->port_init << 16) | qdev->port_init)); +end: + ql_sem_unlock(qdev, qdev->xg_sem_mask); + return status; +} + +/* Get the next large buffer. */ +struct bq_desc *ql_get_curr_lbuf(struct rx_ring *rx_ring) +{ + struct bq_desc *lbq_desc = &rx_ring->lbq[rx_ring->lbq_curr_idx]; + rx_ring->lbq_curr_idx++; + if (rx_ring->lbq_curr_idx == rx_ring->lbq_len) + rx_ring->lbq_curr_idx = 0; + rx_ring->lbq_free_cnt++; + return lbq_desc; +} + +/* Get the next small buffer. */ +struct bq_desc *ql_get_curr_sbuf(struct rx_ring *rx_ring) +{ + struct bq_desc *sbq_desc = &rx_ring->sbq[rx_ring->sbq_curr_idx]; + rx_ring->sbq_curr_idx++; + if (rx_ring->sbq_curr_idx == rx_ring->sbq_len) + rx_ring->sbq_curr_idx = 0; + rx_ring->sbq_free_cnt++; + return sbq_desc; +} + +/* Update an rx ring index. */ +static void ql_update_cq(struct rx_ring *rx_ring) +{ + rx_ring->cnsmr_idx++; + rx_ring->curr_entry++; + if (unlikely(rx_ring->cnsmr_idx == rx_ring->cq_len)) { + rx_ring->cnsmr_idx = 0; + rx_ring->curr_entry = rx_ring->cq_base; + } +} + +static void ql_write_cq_idx(struct rx_ring *rx_ring) +{ + ql_write_db_reg(rx_ring->cnsmr_idx, rx_ring->cnsmr_idx_db_reg); +} + +/* Process (refill) a large buffer queue. */ +static void ql_update_lbq(struct ql_adapter *qdev, struct rx_ring *rx_ring) +{ + int clean_idx = rx_ring->lbq_clean_idx; + struct bq_desc *lbq_desc; + struct bq_element *bq; + u64 map; + int i; + + while (rx_ring->lbq_free_cnt > 16) { + for (i = 0; i < 16; i++) { + QPRINTK(qdev, RX_STATUS, DEBUG, + "lbq: try cleaning clean_idx = %d.\n", + clean_idx); + lbq_desc = &rx_ring->lbq[clean_idx]; + bq = lbq_desc->bq; + if (lbq_desc->p.lbq_page == NULL) { + QPRINTK(qdev, RX_STATUS, DEBUG, + "lbq: getting new page for index %d.\n", + lbq_desc->index); + lbq_desc->p.lbq_page = alloc_page(GFP_ATOMIC); + if (lbq_desc->p.lbq_page == NULL) { + QPRINTK(qdev, RX_STATUS, ERR, + "Couldn't get a page.\n"); + return; + } + map = pci_map_page(qdev->pdev, + lbq_desc->p.lbq_page, + 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(qdev->pdev, map)) { + QPRINTK(qdev, RX_STATUS, ERR, + "PCI mapping failed.\n"); + return; + } + pci_unmap_addr_set(lbq_desc, mapaddr, map); + pci_unmap_len_set(lbq_desc, maplen, PAGE_SIZE); + bq->addr_lo = /*lbq_desc->addr_lo = */ + cpu_to_le32(map); + bq->addr_hi = /*lbq_desc->addr_hi = */ + cpu_to_le32(map >> 32); + } + clean_idx++; + if (clean_idx == rx_ring->lbq_len) + clean_idx = 0; + } + + rx_ring->lbq_clean_idx = clean_idx; + rx_ring->lbq_prod_idx += 16; + if (rx_ring->lbq_prod_idx == rx_ring->lbq_len) + rx_ring->lbq_prod_idx = 0; + QPRINTK(qdev, RX_STATUS, DEBUG, + "lbq: updating prod idx = %d.\n", + rx_ring->lbq_prod_idx); + ql_write_db_reg(rx_ring->lbq_prod_idx, + rx_ring->lbq_prod_idx_db_reg); + rx_ring->lbq_free_cnt -= 16; + } +} + +/* Process (refill) a small buffer queue. */ +static void ql_update_sbq(struct ql_adapter *qdev, struct rx_ring *rx_ring) +{ + int clean_idx = rx_ring->sbq_clean_idx; + struct bq_desc *sbq_desc; + struct bq_element *bq; + u64 map; + int i; + + while (rx_ring->sbq_free_cnt > 16) { + for (i = 0; i < 16; i++) { + sbq_desc = &rx_ring->sbq[clean_idx]; + QPRINTK(qdev, RX_STATUS, DEBUG, + "sbq: try cleaning clean_idx = %d.\n", + clean_idx); + bq = sbq_desc->bq; + if (sbq_desc->p.skb == NULL) { + QPRINTK(qdev, RX_STATUS, DEBUG, + "sbq: getting new skb for index %d.\n", + sbq_desc->index); + sbq_desc->p.skb = + netdev_alloc_skb(qdev->ndev, + rx_ring->sbq_buf_size); + if (sbq_desc->p.skb == NULL) { + QPRINTK(qdev, PROBE, ERR, + "Couldn't get an skb.\n"); + rx_ring->sbq_clean_idx = clean_idx; + return; + } + skb_reserve(sbq_desc->p.skb, QLGE_SB_PAD); + map = pci_map_single(qdev->pdev, + sbq_desc->p.skb->data, + rx_ring->sbq_buf_size / + 2, PCI_DMA_FROMDEVICE); + pci_unmap_addr_set(sbq_desc, mapaddr, map); + pci_unmap_len_set(sbq_desc, maplen, + rx_ring->sbq_buf_size / 2); + bq->addr_lo = cpu_to_le32(map); + bq->addr_hi = cpu_to_le32(map >> 32); + } + + clean_idx++; + if (clean_idx == rx_ring->sbq_len) + clean_idx = 0; + } + rx_ring->sbq_clean_idx = clean_idx; + rx_ring->sbq_prod_idx += 16; + if (rx_ring->sbq_prod_idx == rx_ring->sbq_len) + rx_ring->sbq_prod_idx = 0; + QPRINTK(qdev, RX_STATUS, DEBUG, + "sbq: updating prod idx = %d.\n", + rx_ring->sbq_prod_idx); + ql_write_db_reg(rx_ring->sbq_prod_idx, + rx_ring->sbq_prod_idx_db_reg); + + rx_ring->sbq_free_cnt -= 16; + } +} + +static void ql_update_buffer_queues(struct ql_adapter *qdev, + struct rx_ring *rx_ring) +{ + ql_update_sbq(qdev, rx_ring); + ql_update_lbq(qdev, rx_ring); +} + +/* Unmaps tx buffers. Can be called from send() if a pci mapping + * fails at some stage, or from the interrupt when a tx completes. + */ +static void ql_unmap_send(struct ql_adapter *qdev, + struct tx_ring_desc *tx_ring_desc, int mapped) +{ + int i; + for (i = 0; i < mapped; i++) { + if (i == 0 || (i == 7 && mapped > 7)) { + /* + * Unmap the skb->data area, or the + * external sglist (AKA the Outbound + * Address List (OAL)). + * If its the zeroeth element, then it's + * the skb->data area. If it's the 7th + * element and there is more than 6 frags, + * then its an OAL. + */ + if (i == 7) { + QPRINTK(qdev, TX_DONE, DEBUG, + "unmapping OAL area.\n"); + } + pci_unmap_single(qdev->pdev, + pci_unmap_addr(&tx_ring_desc->map[i], + mapaddr), + pci_unmap_len(&tx_ring_desc->map[i], + maplen), + PCI_DMA_TODEVICE); + } else { + QPRINTK(qdev, TX_DONE, DEBUG, "unmapping frag %d.\n", + i); + pci_unmap_page(qdev->pdev, + pci_unmap_addr(&tx_ring_desc->map[i], + mapaddr), + pci_unmap_len(&tx_ring_desc->map[i], + maplen), PCI_DMA_TODEVICE); + } + } + +} + +/* Map the buffers for this transmit. This will return + * NETDEV_TX_BUSY or NETDEV_TX_OK based on success. + */ +static int ql_map_send(struct ql_adapter *qdev, + struct ob_mac_iocb_req *mac_iocb_ptr, + struct sk_buff *skb, struct tx_ring_desc *tx_ring_desc) +{ + int len = skb_headlen(skb); + dma_addr_t map; + int frag_idx, err, map_idx = 0; + struct tx_buf_desc *tbd = mac_iocb_ptr->tbd; + int frag_cnt = skb_shinfo(skb)->nr_frags; + + if (frag_cnt) { + QPRINTK(qdev, TX_QUEUED, DEBUG, "frag_cnt = %d.\n", frag_cnt); + } + /* + * Map the skb buffer first. + */ + map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE); + + err = pci_dma_mapping_error(qdev->pdev, map); + if (err) { + QPRINTK(qdev, TX_QUEUED, ERR, + "PCI mapping failed with error: %d\n", err); + + return NETDEV_TX_BUSY; + } + + tbd->len = cpu_to_le32(len); + tbd->addr = cpu_to_le64(map); + pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map); + pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, len); + map_idx++; + + /* + * This loop fills the remainder of the 8 address descriptors + * in the IOCB. If there are more than 7 fragments, then the + * eighth address desc will point to an external list (OAL). + * When this happens, the remainder of the frags will be stored + * in this list. + */ + for (frag_idx = 0; frag_idx < frag_cnt; frag_idx++, map_idx++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[frag_idx]; + tbd++; + if (frag_idx == 6 && frag_cnt > 7) { + /* Let's tack on an sglist. + * Our control block will now + * look like this: + * iocb->seg[0] = skb->data + * iocb->seg[1] = frag[0] + * iocb->seg[2] = frag[1] + * iocb->seg[3] = frag[2] + * iocb->seg[4] = frag[3] + * iocb->seg[5] = frag[4] + * iocb->seg[6] = frag[5] + * iocb->seg[7] = ptr to OAL (external sglist) + * oal->seg[0] = frag[6] + * oal->seg[1] = frag[7] + * oal->seg[2] = frag[8] + * oal->seg[3] = frag[9] + * oal->seg[4] = frag[10] + * etc... + */ + /* Tack on the OAL in the eighth segment of IOCB. */ + map = pci_map_single(qdev->pdev, &tx_ring_desc->oal, + sizeof(struct oal), + PCI_DMA_TODEVICE); + err = pci_dma_mapping_error(qdev->pdev, map); + if (err) { + QPRINTK(qdev, TX_QUEUED, ERR, + "PCI mapping outbound address list with error: %d\n", + err); + goto map_error; + } + + tbd->addr = cpu_to_le64(map); + /* + * The length is the number of fragments + * that remain to be mapped times the length + * of our sglist (OAL). + */ + tbd->len = + cpu_to_le32((sizeof(struct tx_buf_desc) * + (frag_cnt - frag_idx)) | TX_DESC_C); + pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, + map); + pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, + sizeof(struct oal)); + tbd = (struct tx_buf_desc *)&tx_ring_desc->oal; + map_idx++; + } + + map = + pci_map_page(qdev->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + + err = pci_dma_mapping_error(qdev->pdev, map); + if (err) { + QPRINTK(qdev, TX_QUEUED, ERR, + "PCI mapping frags failed with error: %d.\n", + err); + goto map_error; + } + + tbd->addr = cpu_to_le64(map); + tbd->len = cpu_to_le32(frag->size); + pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map); + pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, + frag->size); + + } + /* Save the number of segments we've mapped. */ + tx_ring_desc->map_cnt = map_idx; + /* Terminate the last segment. */ + tbd->len = cpu_to_le32(le32_to_cpu(tbd->len) | TX_DESC_E); + return NETDEV_TX_OK; + +map_error: + /* + * If the first frag mapping failed, then i will be zero. + * This causes the unmap of the skb->data area. Otherwise + * we pass in the number of frags that mapped successfully + * so they can be umapped. + */ + ql_unmap_send(qdev, tx_ring_desc, map_idx); + return NETDEV_TX_BUSY; +} + +void ql_realign_skb(struct sk_buff *skb, int len) +{ + void *temp_addr = skb->data; + + /* Undo the skb_reserve(skb,32) we did before + * giving to hardware, and realign data on + * a 2-byte boundary. + */ + skb->data -= QLGE_SB_PAD - NET_IP_ALIGN; + skb->tail -= QLGE_SB_PAD - NET_IP_ALIGN; + skb_copy_to_linear_data(skb, temp_addr, + (unsigned int)len); +} + +/* + * This function builds an skb for the given inbound + * completion. It will be rewritten for readability in the near + * future, but for not it works well. + */ +static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev, + struct rx_ring *rx_ring, + struct ib_mac_iocb_rsp *ib_mac_rsp) +{ + struct bq_desc *lbq_desc; + struct bq_desc *sbq_desc; + struct sk_buff *skb = NULL; + u32 length = le32_to_cpu(ib_mac_rsp->data_len); + u32 hdr_len = le32_to_cpu(ib_mac_rsp->hdr_len); + + /* + * Handle the header buffer if present. + */ + if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HV && + ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) { + QPRINTK(qdev, RX_STATUS, DEBUG, "Header of %d bytes in small buffer.\n", hdr_len); + /* + * Headers fit nicely into a small buffer. + */ + sbq_desc = ql_get_curr_sbuf(rx_ring); + pci_unmap_single(qdev->pdev, + pci_unmap_addr(sbq_desc, mapaddr), + pci_unmap_len(sbq_desc, maplen), + PCI_DMA_FROMDEVICE); + skb = sbq_desc->p.skb; + ql_realign_skb(skb, hdr_len); + skb_put(skb, hdr_len); + sbq_desc->p.skb = NULL; + } + + /* + * Handle the data buffer(s). + */ + if (unlikely(!length)) { /* Is there data too? */ + QPRINTK(qdev, RX_STATUS, DEBUG, + "No Data buffer in this packet.\n"); + return skb; + } + + if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DS) { + if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) { + QPRINTK(qdev, RX_STATUS, DEBUG, + "Headers in small, data of %d bytes in small, combine them.\n", length); + /* + * Data is less than small buffer size so it's + * stuffed in a small buffer. + * For this case we append the data + * from the "data" small buffer to the "header" small + * buffer. + */ + sbq_desc = ql_get_curr_sbuf(rx_ring); + pci_dma_sync_single_for_cpu(qdev->pdev, + pci_unmap_addr + (sbq_desc, mapaddr), + pci_unmap_len + (sbq_desc, maplen), + PCI_DMA_FROMDEVICE); + memcpy(skb_put(skb, length), + sbq_desc->p.skb->data, length); + pci_dma_sync_single_for_device(qdev->pdev, + pci_unmap_addr + (sbq_desc, + mapaddr), + pci_unmap_len + (sbq_desc, + maplen), + PCI_DMA_FROMDEVICE); + } else { + QPRINTK(qdev, RX_STATUS, DEBUG, + "%d bytes in a single small buffer.\n", length); + sbq_desc = ql_get_curr_sbuf(rx_ring); + skb = sbq_desc->p.skb; + ql_realign_skb(skb, length); + skb_put(skb, length); + pci_unmap_single(qdev->pdev, + pci_unmap_addr(sbq_desc, + mapaddr), + pci_unmap_len(sbq_desc, + maplen), + PCI_DMA_FROMDEVICE); + sbq_desc->p.skb = NULL; + } + } else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) { + if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) { + QPRINTK(qdev, RX_STATUS, DEBUG, + "Header in small, %d bytes in large. Chain large to small!\n", length); + /* + * The data is in a single large buffer. We + * chain it to the header buffer's skb and let + * it rip. + */ + lbq_desc = ql_get_curr_lbuf(rx_ring); + pci_unmap_page(qdev->pdev, + pci_unmap_addr(lbq_desc, + mapaddr), + pci_unmap_len(lbq_desc, maplen), + PCI_DMA_FROMDEVICE); + QPRINTK(qdev, RX_STATUS, DEBUG, + "Chaining page to skb.\n"); + skb_fill_page_desc(skb, 0, lbq_desc->p.lbq_page, + 0, length); + skb->len += length; + skb->data_len += length; + skb->truesize += length; + lbq_desc->p.lbq_page = NULL; + } else { + /* + * The headers and data are in a single large buffer. We + * copy it to a new skb and let it go. This can happen with + * jumbo mtu on a non-TCP/UDP frame. + */ + lbq_desc = ql_get_curr_lbuf(rx_ring); + skb = netdev_alloc_skb(qdev->ndev, length); + if (skb == NULL) { + QPRINTK(qdev, PROBE, DEBUG, + "No skb available, drop the packet.\n"); + return NULL; + } + skb_reserve(skb, NET_IP_ALIGN); + QPRINTK(qdev, RX_STATUS, DEBUG, + "%d bytes of headers and data in large. Chain page to new skb and pull tail.\n", length); + skb_fill_page_desc(skb, 0, lbq_desc->p.lbq_page, + 0, length); + skb->len += length; + skb->data_len += length; + skb->truesize += length; + length -= length; + lbq_desc->p.lbq_page = NULL; + __pskb_pull_tail(skb, + (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ? + VLAN_ETH_HLEN : ETH_HLEN); + } + } else { + /* + * The data is in a chain of large buffers + * pointed to by a small buffer. We loop + * thru and chain them to the our small header + * buffer's skb. + * frags: There are 18 max frags and our small + * buffer will hold 32 of them. The thing is, + * we'll use 3 max for our 9000 byte jumbo + * frames. If the MTU goes up we could + * eventually be in trouble. + */ + int size, offset, i = 0; + struct bq_element *bq, bq_array[8]; + sbq_desc = ql_get_curr_sbuf(rx_ring); + pci_unmap_single(qdev->pdev, + pci_unmap_addr(sbq_desc, mapaddr), + pci_unmap_len(sbq_desc, maplen), + PCI_DMA_FROMDEVICE); + if (!(ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS)) { + /* + * This is an non TCP/UDP IP frame, so + * the headers aren't split into a small + * buffer. We have to use the small buffer + * that contains our sg list as our skb to + * send upstairs. Copy the sg list here to + * a local buffer and use it to find the + * pages to chain. + */ + QPRINTK(qdev, RX_STATUS, DEBUG, + "%d bytes of headers & data in chain of large.\n", length); + skb = sbq_desc->p.skb; + bq = &bq_array[0]; + memcpy(bq, skb->data, sizeof(bq_array)); + sbq_desc->p.skb = NULL; + skb_reserve(skb, NET_IP_ALIGN); + } else { + QPRINTK(qdev, RX_STATUS, DEBUG, + "Headers in small, %d bytes of data in chain of large.\n", length); + bq = (struct bq_element *)sbq_desc->p.skb->data; + } + while (length > 0) { + lbq_desc = ql_get_curr_lbuf(rx_ring); + if ((bq->addr_lo & ~BQ_MASK) != lbq_desc->bq->addr_lo) { + QPRINTK(qdev, RX_STATUS, ERR, + "Panic!!! bad large buffer address, expected 0x%.08x, got 0x%.08x.\n", + lbq_desc->bq->addr_lo, bq->addr_lo); + return NULL; + } + pci_unmap_page(qdev->pdev, + pci_unmap_addr(lbq_desc, + mapaddr), + pci_unmap_len(lbq_desc, + maplen), + PCI_DMA_FROMDEVICE); + size = (length < PAGE_SIZE) ? length : PAGE_SIZE; + offset = 0; + + QPRINTK(qdev, RX_STATUS, DEBUG, + "Adding page %d to skb for %d bytes.\n", + i, size); + skb_fill_page_desc(skb, i, lbq_desc->p.lbq_page, + offset, size); + skb->len += size; + skb->data_len += size; + skb->truesize += size; + length -= size; + lbq_desc->p.lbq_page = NULL; + bq++; + i++; + } + __pskb_pull_tail(skb, (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ? + VLAN_ETH_HLEN : ETH_HLEN); + } + return skb; +} + +/* Process an inbound completion from an rx ring. */ +static void ql_process_mac_rx_intr(struct ql_adapter *qdev, + struct rx_ring *rx_ring, + struct ib_mac_iocb_rsp *ib_mac_rsp) +{ + struct net_device *ndev = qdev->ndev; + struct sk_buff *skb = NULL; + + QL_DUMP_IB_MAC_RSP(ib_mac_rsp); + + skb = ql_build_rx_skb(qdev, rx_ring, ib_mac_rsp); + if (unlikely(!skb)) { + QPRINTK(qdev, RX_STATUS, DEBUG, + "No skb available, drop packet.\n"); + return; + } + + prefetch(skb->data); + skb->dev = ndev; + if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) { + QPRINTK(qdev, RX_STATUS, DEBUG, "%s%s%s Multicast.\n", + (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) == + IB_MAC_IOCB_RSP_M_HASH ? "Hash" : "", + (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) == + IB_MAC_IOCB_RSP_M_REG ? "Registered" : "", + (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) == + IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : ""); + } + if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) { + QPRINTK(qdev, RX_STATUS, DEBUG, "Promiscuous Packet.\n"); + } + if (ib_mac_rsp->flags1 & (IB_MAC_IOCB_RSP_IE | IB_MAC_IOCB_RSP_TE)) { + QPRINTK(qdev, RX_STATUS, ERR, + "Bad checksum for this %s packet.\n", + ((ib_mac_rsp-> + flags2 & IB_MAC_IOCB_RSP_T) ? "TCP" : "UDP")); + skb->ip_summed = CHECKSUM_NONE; + } else if (qdev->rx_csum && + ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) || + ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) && + !(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_NU)))) { + QPRINTK(qdev, RX_STATUS, DEBUG, "RX checksum done!\n"); + skb->ip_summed = CHECKSUM_UNNECESSARY; + } + qdev->stats.rx_packets++; + qdev->stats.rx_bytes += skb->len; + skb->protocol = eth_type_trans(skb, ndev); + if (qdev->vlgrp && (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V)) { + QPRINTK(qdev, RX_STATUS, DEBUG, + "Passing a VLAN packet upstream.\n"); + vlan_hwaccel_rx(skb, qdev->vlgrp, + le16_to_cpu(ib_mac_rsp->vlan_id)); + } else { + QPRINTK(qdev, RX_STATUS, DEBUG, + "Passing a normal packet upstream.\n"); + netif_rx(skb); + } + ndev->last_rx = jiffies; +} + +/* Process an outbound completion from an rx ring. */ +static void ql_process_mac_tx_intr(struct ql_adapter *qdev, + struct ob_mac_iocb_rsp *mac_rsp) +{ + struct tx_ring *tx_ring; + struct tx_ring_desc *tx_ring_desc; + + QL_DUMP_OB_MAC_RSP(mac_rsp); + tx_ring = &qdev->tx_ring[mac_rsp->txq_idx]; + tx_ring_desc = &tx_ring->q[mac_rsp->tid]; + ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt); + qdev->stats.tx_bytes += tx_ring_desc->map_cnt; + qdev->stats.tx_packets++; + dev_kfree_skb(tx_ring_desc->skb); + tx_ring_desc->skb = NULL; + + if (unlikely(mac_rsp->flags1 & (OB_MAC_IOCB_RSP_E | + OB_MAC_IOCB_RSP_S | + OB_MAC_IOCB_RSP_L | + OB_MAC_IOCB_RSP_P | OB_MAC_IOCB_RSP_B))) { + if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_E) { + QPRINTK(qdev, TX_DONE, WARNING, + "Total descriptor length did not match transfer length.\n"); + } + if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_S) { + QPRINTK(qdev, TX_DONE, WARNING, + "Frame too short to be legal, not sent.\n"); + } + if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_L) { + QPRINTK(qdev, TX_DONE, WARNING, + "Frame too long, but sent anyway.\n"); + } + if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_B) { + QPRINTK(qdev, TX_DONE, WARNING, + "PCI backplane error. Frame not sent.\n"); + } + } + atomic_inc(&tx_ring->tx_count); +} + +/* Fire up a handler to reset the MPI processor. */ +void ql_queue_fw_error(struct ql_adapter *qdev) +{ + netif_stop_queue(qdev->ndev); + netif_carrier_off(qdev->ndev); + queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0); +} + +void ql_queue_asic_error(struct ql_adapter *qdev) +{ + netif_stop_queue(qdev->ndev); + netif_carrier_off(qdev->ndev); + ql_disable_interrupts(qdev); + queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0); +} + +static void ql_process_chip_ae_intr(struct ql_adapter *qdev, + struct ib_ae_iocb_rsp *ib_ae_rsp) +{ + switch (ib_ae_rsp->event) { + case MGMT_ERR_EVENT: + QPRINTK(qdev, RX_ERR, ERR, + "Management Processor Fatal Error.\n"); + ql_queue_fw_error(qdev); + return; + + case CAM_LOOKUP_ERR_EVENT: + QPRINTK(qdev, LINK, ERR, + "Multiple CAM hits lookup occurred.\n"); + QPRINTK(qdev, DRV, ERR, "This event shouldn't occur.\n"); + ql_queue_asic_error(qdev); + return; + + case SOFT_ECC_ERROR_EVENT: + QPRINTK(qdev, RX_ERR, ERR, "Soft ECC error detected.\n"); + ql_queue_asic_error(qdev); + break; + + case PCI_ERR_ANON_BUF_RD: + QPRINTK(qdev, RX_ERR, ERR, + "PCI error occurred when reading anonymous buffers from rx_ring %d.\n", + ib_ae_rsp->q_id); + ql_queue_asic_error(qdev); + break; + + default: + QPRINTK(qdev, DRV, ERR, "Unexpected event %d.\n", + ib_ae_rsp->event); + ql_queue_asic_error(qdev); + break; + } +} + +static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring) +{ + struct ql_adapter *qdev = rx_ring->qdev; + u32 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg); + struct ob_mac_iocb_rsp *net_rsp = NULL; + int count = 0; + + /* While there are entries in the completion queue. */ + while (prod != rx_ring->cnsmr_idx) { + + QPRINTK(qdev, RX_STATUS, DEBUG, + "cq_id = %d, prod = %d, cnsmr = %d.\n.", rx_ring->cq_id, + prod, rx_ring->cnsmr_idx); + + net_rsp = (struct ob_mac_iocb_rsp *)rx_ring->curr_entry; + rmb(); + switch (net_rsp->opcode) { + + case OPCODE_OB_MAC_TSO_IOCB: + case OPCODE_OB_MAC_IOCB: + ql_process_mac_tx_intr(qdev, net_rsp); + break; + default: + QPRINTK(qdev, RX_STATUS, DEBUG, + "Hit default case, not handled! dropping the packet, opcode = %x.\n", + net_rsp->opcode); + } + count++; + ql_update_cq(rx_ring); + prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg); + } + ql_write_cq_idx(rx_ring); + if (netif_queue_stopped(qdev->ndev) && net_rsp != NULL) { + struct tx_ring *tx_ring = &qdev->tx_ring[net_rsp->txq_idx]; + if (atomic_read(&tx_ring->queue_stopped) && + (atomic_read(&tx_ring->tx_count) > (tx_ring->wq_len / 4))) + /* + * The queue got stopped because the tx_ring was full. + * Wake it up, because it's now at least 25% empty. + */ + netif_wake_queue(qdev->ndev); + } + + return count; +} + +static int ql_clean_inbound_rx_ring(struct rx_ring *rx_ring, int budget) +{ + struct ql_adapter *qdev = rx_ring->qdev; + u32 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg); + struct ql_net_rsp_iocb *net_rsp; + int count = 0; + + /* While there are entries in the completion queue. */ + while (prod != rx_ring->cnsmr_idx) { + + QPRINTK(qdev, RX_STATUS, DEBUG, + "cq_id = %d, prod = %d, cnsmr = %d.\n.", rx_ring->cq_id, + prod, rx_ring->cnsmr_idx); + + net_rsp = rx_ring->curr_entry; + rmb(); + switch (net_rsp->opcode) { + case OPCODE_IB_MAC_IOCB: + ql_process_mac_rx_intr(qdev, rx_ring, + (struct ib_mac_iocb_rsp *) + net_rsp); + break; + + case OPCODE_IB_AE_IOCB: + ql_process_chip_ae_intr(qdev, (struct ib_ae_iocb_rsp *) + net_rsp); + break; + default: + { + QPRINTK(qdev, RX_STATUS, DEBUG, + "Hit default case, not handled! dropping the packet, opcode = %x.\n", + net_rsp->opcode); + } + } + count++; + ql_update_cq(rx_ring); + prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg); + if (count == budget) + break; + } + ql_update_buffer_queues(qdev, rx_ring); + ql_write_cq_idx(rx_ring); + return count; +} + +static int ql_napi_poll_msix(struct napi_struct *napi, int budget) +{ + struct rx_ring *rx_ring = container_of(napi, struct rx_ring, napi); + struct ql_adapter *qdev = rx_ring->qdev; + int work_done = ql_clean_inbound_rx_ring(rx_ring, budget); + + QPRINTK(qdev, RX_STATUS, DEBUG, "Enter, NAPI POLL cq_id = %d.\n", + rx_ring->cq_id); + + if (work_done < budget) { + __netif_rx_complete(qdev->ndev, napi); + ql_enable_completion_interrupt(qdev, rx_ring->irq); + } + return work_done; +} + +static void ql_vlan_rx_register(struct net_device *ndev, struct vlan_group *grp) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + + qdev->vlgrp = grp; + if (grp) { + QPRINTK(qdev, IFUP, DEBUG, "Turning on VLAN in NIC_RCV_CFG.\n"); + ql_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK | + NIC_RCV_CFG_VLAN_MATCH_AND_NON); + } else { + QPRINTK(qdev, IFUP, DEBUG, + "Turning off VLAN in NIC_RCV_CFG.\n"); + ql_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK); + } +} + +static void ql_vlan_rx_add_vid(struct net_device *ndev, u16 vid) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + u32 enable_bit = MAC_ADDR_E; + + spin_lock(&qdev->hw_lock); + if (ql_set_mac_addr_reg + (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) { + QPRINTK(qdev, IFUP, ERR, "Failed to init vlan address.\n"); + } + spin_unlock(&qdev->hw_lock); +} + +static void ql_vlan_rx_kill_vid(struct net_device *ndev, u16 vid) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + u32 enable_bit = 0; + + spin_lock(&qdev->hw_lock); + if (ql_set_mac_addr_reg + (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) { + QPRINTK(qdev, IFUP, ERR, "Failed to clear vlan address.\n"); + } + spin_unlock(&qdev->hw_lock); + +} + +/* Worker thread to process a given rx_ring that is dedicated + * to outbound completions. + */ +static void ql_tx_clean(struct work_struct *work) +{ + struct rx_ring *rx_ring = + container_of(work, struct rx_ring, rx_work.work); + ql_clean_outbound_rx_ring(rx_ring); + ql_enable_completion_interrupt(rx_ring->qdev, rx_ring->irq); + +} + +/* Worker thread to process a given rx_ring that is dedicated + * to inbound completions. + */ +static void ql_rx_clean(struct work_struct *work) +{ + struct rx_ring *rx_ring = + container_of(work, struct rx_ring, rx_work.work); + ql_clean_inbound_rx_ring(rx_ring, 64); + ql_enable_completion_interrupt(rx_ring->qdev, rx_ring->irq); +} + +/* MSI-X Multiple Vector Interrupt Handler for outbound completions. */ +static irqreturn_t qlge_msix_tx_isr(int irq, void *dev_id) +{ + struct rx_ring *rx_ring = dev_id; + queue_delayed_work_on(rx_ring->cpu, rx_ring->qdev->q_workqueue, + &rx_ring->rx_work, 0); + return IRQ_HANDLED; +} + +/* MSI-X Multiple Vector Interrupt Handler for inbound completions. */ +static irqreturn_t qlge_msix_rx_isr(int irq, void *dev_id) +{ + struct rx_ring *rx_ring = dev_id; + struct ql_adapter *qdev = rx_ring->qdev; + netif_rx_schedule(qdev->ndev, &rx_ring->napi); + return IRQ_HANDLED; +} + +/* We check here to see if we're already handling a legacy + * interrupt. If we are, then it must belong to another + * chip with which we're sharing the interrupt line. + */ +int ql_legacy_check(struct ql_adapter *qdev) +{ + int err; + spin_lock(&qdev->legacy_lock); + err = atomic_read(&qdev->intr_context[0].irq_cnt); + spin_unlock(&qdev->legacy_lock); + return err; +} + +/* This handles a fatal error, MPI activity, and the default + * rx_ring in an MSI-X multiple vector environment. + * In MSI/Legacy environment it also process the rest of + * the rx_rings. + */ +static irqreturn_t qlge_isr(int irq, void *dev_id) +{ + struct rx_ring *rx_ring = dev_id; + struct ql_adapter *qdev = rx_ring->qdev; + struct intr_context *intr_context = &qdev->intr_context[0]; + u32 var; + int i; + int work_done = 0; + + if (qdev->legacy_check && qdev->legacy_check(qdev)) { + QPRINTK(qdev, INTR, INFO, "Already busy, not our interrupt.\n"); + return IRQ_NONE; /* Not our interrupt */ + } + + var = ql_read32(qdev, STS); + + /* + * Check for fatal error. + */ + if (var & STS_FE) { + ql_queue_asic_error(qdev); + QPRINTK(qdev, INTR, ERR, "Got fatal error, STS = %x.\n", var); + var = ql_read32(qdev, ERR_STS); + QPRINTK(qdev, INTR, ERR, + "Resetting chip. Error Status Register = 0x%x\n", var); + return IRQ_HANDLED; + } + + /* + * Check MPI processor activity. + */ + if (var & STS_PI) { + /* + * We've got an async event or mailbox completion. + * Handle it and clear the source of the interrupt. + */ + QPRINTK(qdev, INTR, ERR, "Got MPI processor interrupt.\n"); + ql_disable_completion_interrupt(qdev, intr_context->intr); + queue_delayed_work_on(smp_processor_id(), qdev->workqueue, + &qdev->mpi_work, 0); + work_done++; + } + + /* + * Check the default queue and wake handler if active. + */ + rx_ring = &qdev->rx_ring[0]; + if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) != rx_ring->cnsmr_idx) { + QPRINTK(qdev, INTR, INFO, "Waking handler for rx_ring[0].\n"); + ql_disable_completion_interrupt(qdev, intr_context->intr); + queue_delayed_work_on(smp_processor_id(), qdev->q_workqueue, + &rx_ring->rx_work, 0); + work_done++; + } + + if (!test_bit(QL_MSIX_ENABLED, &qdev->flags)) { + /* + * Start the DPC for each active queue. + */ + for (i = 1; i < qdev->rx_ring_count; i++) { + rx_ring = &qdev->rx_ring[i]; + if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) != + rx_ring->cnsmr_idx) { + QPRINTK(qdev, INTR, INFO, + "Waking handler for rx_ring[%d].\n", i); + ql_disable_completion_interrupt(qdev, + intr_context-> + intr); + if (i < qdev->rss_ring_first_cq_id) + queue_delayed_work_on(rx_ring->cpu, + qdev->q_workqueue, + &rx_ring->rx_work, + 0); + else + netif_rx_schedule(qdev->ndev, + &rx_ring->napi); + work_done++; + } + } + } + return work_done ? IRQ_HANDLED : IRQ_NONE; +} + +static int ql_tso(struct sk_buff *skb, struct ob_mac_tso_iocb_req *mac_iocb_ptr) +{ + + if (skb_is_gso(skb)) { + int err; + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (err) + return err; + } + + mac_iocb_ptr->opcode = OPCODE_OB_MAC_TSO_IOCB; + mac_iocb_ptr->flags3 |= OB_MAC_TSO_IOCB_IC; + mac_iocb_ptr->frame_len = cpu_to_le32((u32) skb->len); + mac_iocb_ptr->total_hdrs_len = + cpu_to_le16(skb_transport_offset(skb) + tcp_hdrlen(skb)); + mac_iocb_ptr->net_trans_offset = + cpu_to_le16(skb_network_offset(skb) | + skb_transport_offset(skb) + << OB_MAC_TRANSPORT_HDR_SHIFT); + mac_iocb_ptr->mss = cpu_to_le16(skb_shinfo(skb)->gso_size); + mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_LSO; + if (likely(skb->protocol == htons(ETH_P_IP))) { + struct iphdr *iph = ip_hdr(skb); + iph->check = 0; + mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP4; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, + IPPROTO_TCP, + 0); + } else if (skb->protocol == htons(ETH_P_IPV6)) { + mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP6; + tcp_hdr(skb)->check = + ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + } + return 1; + } + return 0; +} + +static void ql_hw_csum_setup(struct sk_buff *skb, + struct ob_mac_tso_iocb_req *mac_iocb_ptr) +{ + int len; + struct iphdr *iph = ip_hdr(skb); + u16 *check; + mac_iocb_ptr->opcode = OPCODE_OB_MAC_TSO_IOCB; + mac_iocb_ptr->frame_len = cpu_to_le32((u32) skb->len); + mac_iocb_ptr->net_trans_offset = + cpu_to_le16(skb_network_offset(skb) | + skb_transport_offset(skb) << OB_MAC_TRANSPORT_HDR_SHIFT); + + mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP4; + len = (ntohs(iph->tot_len) - (iph->ihl << 2)); + if (likely(iph->protocol == IPPROTO_TCP)) { + check = &(tcp_hdr(skb)->check); + mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_TC; + mac_iocb_ptr->total_hdrs_len = + cpu_to_le16(skb_transport_offset(skb) + + (tcp_hdr(skb)->doff << 2)); + } else { + check = &(udp_hdr(skb)->check); + mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_UC; + mac_iocb_ptr->total_hdrs_len = + cpu_to_le16(skb_transport_offset(skb) + + sizeof(struct udphdr)); + } + *check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, len, iph->protocol, 0); +} + +static int qlge_send(struct sk_buff *skb, struct net_device *ndev) +{ + struct tx_ring_desc *tx_ring_desc; + struct ob_mac_iocb_req *mac_iocb_ptr; + struct ql_adapter *qdev = netdev_priv(ndev); + int tso; + struct tx_ring *tx_ring; + u32 tx_ring_idx = (u32) QL_TXQ_IDX(qdev, skb); + + tx_ring = &qdev->tx_ring[tx_ring_idx]; + + if (unlikely(atomic_read(&tx_ring->tx_count) < 2)) { + QPRINTK(qdev, TX_QUEUED, INFO, + "%s: shutting down tx queue %d du to lack of resources.\n", + __func__, tx_ring_idx); + netif_stop_queue(ndev); + atomic_inc(&tx_ring->queue_stopped); + return NETDEV_TX_BUSY; + } + tx_ring_desc = &tx_ring->q[tx_ring->prod_idx]; + mac_iocb_ptr = tx_ring_desc->queue_entry; + memset((void *)mac_iocb_ptr, 0, sizeof(mac_iocb_ptr)); + if (ql_map_send(qdev, mac_iocb_ptr, skb, tx_ring_desc) != NETDEV_TX_OK) { + QPRINTK(qdev, TX_QUEUED, ERR, "Could not map the segments.\n"); + return NETDEV_TX_BUSY; + } + + mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB; + mac_iocb_ptr->tid = tx_ring_desc->index; + /* We use the upper 32-bits to store the tx queue for this IO. + * When we get the completion we can use it to establish the context. + */ + mac_iocb_ptr->txq_idx = tx_ring_idx; + tx_ring_desc->skb = skb; + + mac_iocb_ptr->frame_len = cpu_to_le16((u16) skb->len); + + if (qdev->vlgrp && vlan_tx_tag_present(skb)) { + QPRINTK(qdev, TX_QUEUED, DEBUG, "Adding a vlan tag %d.\n", + vlan_tx_tag_get(skb)); + mac_iocb_ptr->flags3 |= OB_MAC_IOCB_V; + mac_iocb_ptr->vlan_tci = cpu_to_le16(vlan_tx_tag_get(skb)); + } + tso = ql_tso(skb, (struct ob_mac_tso_iocb_req *)mac_iocb_ptr); + if (tso < 0) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } else if (unlikely(!tso) && (skb->ip_summed == CHECKSUM_PARTIAL)) { + ql_hw_csum_setup(skb, + (struct ob_mac_tso_iocb_req *)mac_iocb_ptr); + } + QL_DUMP_OB_MAC_IOCB(mac_iocb_ptr); + tx_ring->prod_idx++; + if (tx_ring->prod_idx == tx_ring->wq_len) + tx_ring->prod_idx = 0; + wmb(); + + ql_write_db_reg(tx_ring->prod_idx, tx_ring->prod_idx_db_reg); + ndev->trans_start = jiffies; + QPRINTK(qdev, TX_QUEUED, DEBUG, "tx queued, slot %d, len %d\n", + tx_ring->prod_idx, skb->len); + + atomic_dec(&tx_ring->tx_count); + return NETDEV_TX_OK; +} + +static void ql_free_shadow_space(struct ql_adapter *qdev) +{ + if (qdev->rx_ring_shadow_reg_area) { + pci_free_consistent(qdev->pdev, + PAGE_SIZE, + qdev->rx_ring_shadow_reg_area, + qdev->rx_ring_shadow_reg_dma); + qdev->rx_ring_shadow_reg_area = NULL; + } + if (qdev->tx_ring_shadow_reg_area) { + pci_free_consistent(qdev->pdev, + PAGE_SIZE, + qdev->tx_ring_shadow_reg_area, + qdev->tx_ring_shadow_reg_dma); + qdev->tx_ring_shadow_reg_area = NULL; + } +} + +static int ql_alloc_shadow_space(struct ql_adapter *qdev) +{ + qdev->rx_ring_shadow_reg_area = + pci_alloc_consistent(qdev->pdev, + PAGE_SIZE, &qdev->rx_ring_shadow_reg_dma); + if (qdev->rx_ring_shadow_reg_area == NULL) { + QPRINTK(qdev, IFUP, ERR, + "Allocation of RX shadow space failed.\n"); + return -ENOMEM; + } + qdev->tx_ring_shadow_reg_area = + pci_alloc_consistent(qdev->pdev, PAGE_SIZE, + &qdev->tx_ring_shadow_reg_dma); + if (qdev->tx_ring_shadow_reg_area == NULL) { + QPRINTK(qdev, IFUP, ERR, + "Allocation of TX shadow space failed.\n"); + goto err_wqp_sh_area; + } + return 0; + +err_wqp_sh_area: + pci_free_consistent(qdev->pdev, + PAGE_SIZE, + qdev->rx_ring_shadow_reg_area, + qdev->rx_ring_shadow_reg_dma); + return -ENOMEM; +} + +static void ql_init_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring) +{ + struct tx_ring_desc *tx_ring_desc; + int i; + struct ob_mac_iocb_req *mac_iocb_ptr; + + mac_iocb_ptr = tx_ring->wq_base; + tx_ring_desc = tx_ring->q; + for (i = 0; i < tx_ring->wq_len; i++) { + tx_ring_desc->index = i; + tx_ring_desc->skb = NULL; + tx_ring_desc->queue_entry = mac_iocb_ptr; + mac_iocb_ptr++; + tx_ring_desc++; + } + atomic_set(&tx_ring->tx_count, tx_ring->wq_len); + atomic_set(&tx_ring->queue_stopped, 0); +} + +static void ql_free_tx_resources(struct ql_adapter *qdev, + struct tx_ring *tx_ring) +{ + if (tx_ring->wq_base) { + pci_free_consistent(qdev->pdev, tx_ring->wq_size, + tx_ring->wq_base, tx_ring->wq_base_dma); + tx_ring->wq_base = NULL; + } + kfree(tx_ring->q); + tx_ring->q = NULL; +} + +static int ql_alloc_tx_resources(struct ql_adapter *qdev, + struct tx_ring *tx_ring) +{ + tx_ring->wq_base = + pci_alloc_consistent(qdev->pdev, tx_ring->wq_size, + &tx_ring->wq_base_dma); + + if ((tx_ring->wq_base == NULL) + || tx_ring->wq_base_dma & (tx_ring->wq_size - 1)) { + QPRINTK(qdev, IFUP, ERR, "tx_ring alloc failed.\n"); + return -ENOMEM; + } + tx_ring->q = + kmalloc(tx_ring->wq_len * sizeof(struct tx_ring_desc), GFP_KERNEL); + if (tx_ring->q == NULL) + goto err; + + return 0; +err: + pci_free_consistent(qdev->pdev, tx_ring->wq_size, + tx_ring->wq_base, tx_ring->wq_base_dma); + return -ENOMEM; +} + +void ql_free_lbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring) +{ + int i; + struct bq_desc *lbq_desc; + + for (i = 0; i < rx_ring->lbq_len; i++) { + lbq_desc = &rx_ring->lbq[i]; + if (lbq_desc->p.lbq_page) { + pci_unmap_page(qdev->pdev, + pci_unmap_addr(lbq_desc, mapaddr), + pci_unmap_len(lbq_desc, maplen), + PCI_DMA_FROMDEVICE); + + put_page(lbq_desc->p.lbq_page); + lbq_desc->p.lbq_page = NULL; + } + lbq_desc->bq->addr_lo = 0; + lbq_desc->bq->addr_hi = 0; + } +} + +/* + * Allocate and map a page for each element of the lbq. + */ +static int ql_alloc_lbq_buffers(struct ql_adapter *qdev, + struct rx_ring *rx_ring) +{ + int i; + struct bq_desc *lbq_desc; + u64 map; + struct bq_element *bq = rx_ring->lbq_base; + + for (i = 0; i < rx_ring->lbq_len; i++) { + lbq_desc = &rx_ring->lbq[i]; + memset(lbq_desc, 0, sizeof(lbq_desc)); + lbq_desc->bq = bq; + lbq_desc->index = i; + lbq_desc->p.lbq_page = alloc_page(GFP_ATOMIC); + if (unlikely(!lbq_desc->p.lbq_page)) { + QPRINTK(qdev, IFUP, ERR, "failed alloc_page().\n"); + goto mem_error; + } else { + map = pci_map_page(qdev->pdev, + lbq_desc->p.lbq_page, + 0, PAGE_SIZE, PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(qdev->pdev, map)) { + QPRINTK(qdev, IFUP, ERR, + "PCI mapping failed.\n"); + goto mem_error; + } + pci_unmap_addr_set(lbq_desc, mapaddr, map); + pci_unmap_len_set(lbq_desc, maplen, PAGE_SIZE); + bq->addr_lo = cpu_to_le32(map); + bq->addr_hi = cpu_to_le32(map >> 32); + } + bq++; + } + return 0; +mem_error: + ql_free_lbq_buffers(qdev, rx_ring); + return -ENOMEM; +} + +void ql_free_sbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring) +{ + int i; + struct bq_desc *sbq_desc; + + for (i = 0; i < rx_ring->sbq_len; i++) { + sbq_desc = &rx_ring->sbq[i]; + if (sbq_desc == NULL) { + QPRINTK(qdev, IFUP, ERR, "sbq_desc %d is NULL.\n", i); + return; + } + if (sbq_desc->p.skb) { + pci_unmap_single(qdev->pdev, + pci_unmap_addr(sbq_desc, mapaddr), + pci_unmap_len(sbq_desc, maplen), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(sbq_desc->p.skb); + sbq_desc->p.skb = NULL; + } + if (sbq_desc->bq == NULL) { + QPRINTK(qdev, IFUP, ERR, "sbq_desc->bq %d is NULL.\n", + i); + return; + } + sbq_desc->bq->addr_lo = 0; + sbq_desc->bq->addr_hi = 0; + } +} + +/* Allocate and map an skb for each element of the sbq. */ +static int ql_alloc_sbq_buffers(struct ql_adapter *qdev, + struct rx_ring *rx_ring) +{ + int i; + struct bq_desc *sbq_desc; + struct sk_buff *skb; + u64 map; + struct bq_element *bq = rx_ring->sbq_base; + + for (i = 0; i < rx_ring->sbq_len; i++) { + sbq_desc = &rx_ring->sbq[i]; + memset(sbq_desc, 0, sizeof(sbq_desc)); + sbq_desc->index = i; + sbq_desc->bq = bq; + skb = netdev_alloc_skb(qdev->ndev, rx_ring->sbq_buf_size); + if (unlikely(!skb)) { + /* Better luck next round */ + QPRINTK(qdev, IFUP, ERR, + "small buff alloc failed for %d bytes at index %d.\n", + rx_ring->sbq_buf_size, i); + goto mem_err; + } + skb_reserve(skb, QLGE_SB_PAD); + sbq_desc->p.skb = skb; + /* + * Map only half the buffer. Because the + * other half may get some data copied to it + * when the completion arrives. + */ + map = pci_map_single(qdev->pdev, + skb->data, + rx_ring->sbq_buf_size / 2, + PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(qdev->pdev, map)) { + QPRINTK(qdev, IFUP, ERR, "PCI mapping failed.\n"); + goto mem_err; + } + pci_unmap_addr_set(sbq_desc, mapaddr, map); + pci_unmap_len_set(sbq_desc, maplen, rx_ring->sbq_buf_size / 2); + bq->addr_lo = /*sbq_desc->addr_lo = */ + cpu_to_le32(map); + bq->addr_hi = /*sbq_desc->addr_hi = */ + cpu_to_le32(map >> 32); + bq++; + } + return 0; +mem_err: + ql_free_sbq_buffers(qdev, rx_ring); + return -ENOMEM; +} + +static void ql_free_rx_resources(struct ql_adapter *qdev, + struct rx_ring *rx_ring) +{ + if (rx_ring->sbq_len) + ql_free_sbq_buffers(qdev, rx_ring); + if (rx_ring->lbq_len) + ql_free_lbq_buffers(qdev, rx_ring); + + /* Free the small buffer queue. */ + if (rx_ring->sbq_base) { + pci_free_consistent(qdev->pdev, + rx_ring->sbq_size, + rx_ring->sbq_base, rx_ring->sbq_base_dma); + rx_ring->sbq_base = NULL; + } + + /* Free the small buffer queue control blocks. */ + kfree(rx_ring->sbq); + rx_ring->sbq = NULL; + + /* Free the large buffer queue. */ + if (rx_ring->lbq_base) { + pci_free_consistent(qdev->pdev, + rx_ring->lbq_size, + rx_ring->lbq_base, rx_ring->lbq_base_dma); + rx_ring->lbq_base = NULL; + } + + /* Free the large buffer queue control blocks. */ + kfree(rx_ring->lbq); + rx_ring->lbq = NULL; + + /* Free the rx queue. */ + if (rx_ring->cq_base) { + pci_free_consistent(qdev->pdev, + rx_ring->cq_size, + rx_ring->cq_base, rx_ring->cq_base_dma); + rx_ring->cq_base = NULL; + } +} + +/* Allocate queues and buffers for this completions queue based + * on the values in the parameter structure. */ +static int ql_alloc_rx_resources(struct ql_adapter *qdev, + struct rx_ring *rx_ring) +{ + + /* + * Allocate the completion queue for this rx_ring. + */ + rx_ring->cq_base = + pci_alloc_consistent(qdev->pdev, rx_ring->cq_size, + &rx_ring->cq_base_dma); + + if (rx_ring->cq_base == NULL) { + QPRINTK(qdev, IFUP, ERR, "rx_ring alloc failed.\n"); + return -ENOMEM; + } + + if (rx_ring->sbq_len) { + /* + * Allocate small buffer queue. + */ + rx_ring->sbq_base = + pci_alloc_consistent(qdev->pdev, rx_ring->sbq_size, + &rx_ring->sbq_base_dma); + + if (rx_ring->sbq_base == NULL) { + QPRINTK(qdev, IFUP, ERR, + "Small buffer queue allocation failed.\n"); + goto err_mem; + } + + /* + * Allocate small buffer queue control blocks. + */ + rx_ring->sbq = + kmalloc(rx_ring->sbq_len * sizeof(struct bq_desc), + GFP_KERNEL); + if (rx_ring->sbq == NULL) { + QPRINTK(qdev, IFUP, ERR, + "Small buffer queue control block allocation failed.\n"); + goto err_mem; + } + + if (ql_alloc_sbq_buffers(qdev, rx_ring)) { + QPRINTK(qdev, IFUP, ERR, + "Small buffer allocation failed.\n"); + goto err_mem; + } + } + + if (rx_ring->lbq_len) { + /* + * Allocate large buffer queue. + */ + rx_ring->lbq_base = + pci_alloc_consistent(qdev->pdev, rx_ring->lbq_size, + &rx_ring->lbq_base_dma); + + if (rx_ring->lbq_base == NULL) { + QPRINTK(qdev, IFUP, ERR, + "Large buffer queue allocation failed.\n"); + goto err_mem; + } + /* + * Allocate large buffer queue control blocks. + */ + rx_ring->lbq = + kmalloc(rx_ring->lbq_len * sizeof(struct bq_desc), + GFP_KERNEL); + if (rx_ring->lbq == NULL) { + QPRINTK(qdev, IFUP, ERR, + "Large buffer queue control block allocation failed.\n"); + goto err_mem; + } + + /* + * Allocate the buffers. + */ + if (ql_alloc_lbq_buffers(qdev, rx_ring)) { + QPRINTK(qdev, IFUP, ERR, + "Large buffer allocation failed.\n"); + goto err_mem; + } + } + + return 0; + +err_mem: + ql_free_rx_resources(qdev, rx_ring); + return -ENOMEM; +} + +static void ql_tx_ring_clean(struct ql_adapter *qdev) +{ + struct tx_ring *tx_ring; + struct tx_ring_desc *tx_ring_desc; + int i, j; + + /* + * Loop through all queues and free + * any resources. + */ + for (j = 0; j < qdev->tx_ring_count; j++) { + tx_ring = &qdev->tx_ring[j]; + for (i = 0; i < tx_ring->wq_len; i++) { + tx_ring_desc = &tx_ring->q[i]; + if (tx_ring_desc && tx_ring_desc->skb) { + QPRINTK(qdev, IFDOWN, ERR, + "Freeing lost SKB %p, from queue %d, index %d.\n", + tx_ring_desc->skb, j, + tx_ring_desc->index); + ql_unmap_send(qdev, tx_ring_desc, + tx_ring_desc->map_cnt); + dev_kfree_skb(tx_ring_desc->skb); + tx_ring_desc->skb = NULL; + } + } + } +} + +static void ql_free_ring_cb(struct ql_adapter *qdev) +{ + kfree(qdev->ring_mem); +} + +static int ql_alloc_ring_cb(struct ql_adapter *qdev) +{ + /* Allocate space for tx/rx ring control blocks. */ + qdev->ring_mem_size = + (qdev->tx_ring_count * sizeof(struct tx_ring)) + + (qdev->rx_ring_count * sizeof(struct rx_ring)); + qdev->ring_mem = kmalloc(qdev->ring_mem_size, GFP_KERNEL); + if (qdev->ring_mem == NULL) { + return -ENOMEM; + } else { + qdev->rx_ring = qdev->ring_mem; + qdev->tx_ring = qdev->ring_mem + + (qdev->rx_ring_count * sizeof(struct rx_ring)); + } + return 0; +} + +static void ql_free_mem_resources(struct ql_adapter *qdev) +{ + int i; + + for (i = 0; i < qdev->tx_ring_count; i++) + ql_free_tx_resources(qdev, &qdev->tx_ring[i]); + for (i = 0; i < qdev->rx_ring_count; i++) + ql_free_rx_resources(qdev, &qdev->rx_ring[i]); + ql_free_shadow_space(qdev); +} + +static int ql_alloc_mem_resources(struct ql_adapter *qdev) +{ + int i; + + /* Allocate space for our shadow registers and such. */ + if (ql_alloc_shadow_space(qdev)) + return -ENOMEM; + + for (i = 0; i < qdev->rx_ring_count; i++) { + if (ql_alloc_rx_resources(qdev, &qdev->rx_ring[i]) != 0) { + QPRINTK(qdev, IFUP, ERR, + "RX resource allocation failed.\n"); + goto err_mem; + } + } + /* Allocate tx queue resources */ + for (i = 0; i < qdev->tx_ring_count; i++) { + if (ql_alloc_tx_resources(qdev, &qdev->tx_ring[i]) != 0) { + QPRINTK(qdev, IFUP, ERR, + "TX resource allocation failed.\n"); + goto err_mem; + } + } + return 0; + +err_mem: + ql_free_mem_resources(qdev); + return -ENOMEM; +} + +/* Set up the rx ring control block and pass it to the chip. + * The control block is defined as + * "Completion Queue Initialization Control Block", or cqicb. + */ +static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring) +{ + struct cqicb *cqicb = &rx_ring->cqicb; + void *shadow_reg = qdev->rx_ring_shadow_reg_area + + (rx_ring->cq_id * sizeof(u64) * 4); + u64 shadow_reg_dma = qdev->rx_ring_shadow_reg_dma + + (rx_ring->cq_id * sizeof(u64) * 4); + void __iomem *doorbell_area = + qdev->doorbell_area + (DB_PAGE_SIZE * (128 + rx_ring->cq_id)); + int err = 0; + u16 bq_len; + + /* Set up the shadow registers for this ring. */ + rx_ring->prod_idx_sh_reg = shadow_reg; + rx_ring->prod_idx_sh_reg_dma = shadow_reg_dma; + shadow_reg += sizeof(u64); + shadow_reg_dma += sizeof(u64); + rx_ring->lbq_base_indirect = shadow_reg; + rx_ring->lbq_base_indirect_dma = shadow_reg_dma; + shadow_reg += sizeof(u64); + shadow_reg_dma += sizeof(u64); + rx_ring->sbq_base_indirect = shadow_reg; + rx_ring->sbq_base_indirect_dma = shadow_reg_dma; + + /* PCI doorbell mem area + 0x00 for consumer index register */ + rx_ring->cnsmr_idx_db_reg = (u32 *) doorbell_area; + rx_ring->cnsmr_idx = 0; + rx_ring->curr_entry = rx_ring->cq_base; + + /* PCI doorbell mem area + 0x04 for valid register */ + rx_ring->valid_db_reg = doorbell_area + 0x04; + + /* PCI doorbell mem area + 0x18 for large buffer consumer */ + rx_ring->lbq_prod_idx_db_reg = (u32 *) (doorbell_area + 0x18); + + /* PCI doorbell mem area + 0x1c */ + rx_ring->sbq_prod_idx_db_reg = (u32 *) (doorbell_area + 0x1c); + + memset((void *)cqicb, 0, sizeof(struct cqicb)); + cqicb->msix_vect = rx_ring->irq; + + cqicb->len = cpu_to_le16(rx_ring->cq_len | LEN_V | LEN_CPP_CONT); + + cqicb->addr_lo = cpu_to_le32(rx_ring->cq_base_dma); + cqicb->addr_hi = cpu_to_le32((u64) rx_ring->cq_base_dma >> 32); + + cqicb->prod_idx_addr_lo = cpu_to_le32(rx_ring->prod_idx_sh_reg_dma); + cqicb->prod_idx_addr_hi = + cpu_to_le32((u64) rx_ring->prod_idx_sh_reg_dma >> 32); + + /* + * Set up the control block load flags. + */ + cqicb->flags = FLAGS_LC | /* Load queue base address */ + FLAGS_LV | /* Load MSI-X vector */ + FLAGS_LI; /* Load irq delay values */ + if (rx_ring->lbq_len) { + cqicb->flags |= FLAGS_LL; /* Load lbq values */ + *((u64 *) rx_ring->lbq_base_indirect) = rx_ring->lbq_base_dma; + cqicb->lbq_addr_lo = + cpu_to_le32(rx_ring->lbq_base_indirect_dma); + cqicb->lbq_addr_hi = + cpu_to_le32((u64) rx_ring->lbq_base_indirect_dma >> 32); + cqicb->lbq_buf_size = cpu_to_le32(rx_ring->lbq_buf_size); + bq_len = (u16) rx_ring->lbq_len; + cqicb->lbq_len = cpu_to_le16(bq_len); + rx_ring->lbq_prod_idx = rx_ring->lbq_len - 16; + rx_ring->lbq_curr_idx = 0; + rx_ring->lbq_clean_idx = rx_ring->lbq_prod_idx; + rx_ring->lbq_free_cnt = 16; + } + if (rx_ring->sbq_len) { + cqicb->flags |= FLAGS_LS; /* Load sbq values */ + *((u64 *) rx_ring->sbq_base_indirect) = rx_ring->sbq_base_dma; + cqicb->sbq_addr_lo = + cpu_to_le32(rx_ring->sbq_base_indirect_dma); + cqicb->sbq_addr_hi = + cpu_to_le32((u64) rx_ring->sbq_base_indirect_dma >> 32); + cqicb->sbq_buf_size = + cpu_to_le16(((rx_ring->sbq_buf_size / 2) + 8) & 0xfffffff8); + bq_len = (u16) rx_ring->sbq_len; + cqicb->sbq_len = cpu_to_le16(bq_len); + rx_ring->sbq_prod_idx = rx_ring->sbq_len - 16; + rx_ring->sbq_curr_idx = 0; + rx_ring->sbq_clean_idx = rx_ring->sbq_prod_idx; + rx_ring->sbq_free_cnt = 16; + } + switch (rx_ring->type) { + case TX_Q: + /* If there's only one interrupt, then we use + * worker threads to process the outbound + * completion handling rx_rings. We do this so + * they can be run on multiple CPUs. There is + * room to play with this more where we would only + * run in a worker if there are more than x number + * of outbound completions on the queue and more + * than one queue active. Some threshold that + * would indicate a benefit in spite of the cost + * of a context switch. + * If there's more than one interrupt, then the + * outbound completions are processed in the ISR. + */ + if (!test_bit(QL_MSIX_ENABLED, &qdev->flags)) + INIT_DELAYED_WORK(&rx_ring->rx_work, ql_tx_clean); + else { + /* With all debug warnings on we see a WARN_ON message + * when we free the skb in the interrupt context. + */ + INIT_DELAYED_WORK(&rx_ring->rx_work, ql_tx_clean); + } + cqicb->irq_delay = cpu_to_le16(qdev->tx_coalesce_usecs); + cqicb->pkt_delay = cpu_to_le16(qdev->tx_max_coalesced_frames); + break; + case DEFAULT_Q: + INIT_DELAYED_WORK(&rx_ring->rx_work, ql_rx_clean); + cqicb->irq_delay = 0; + cqicb->pkt_delay = 0; + break; + case RX_Q: + /* Inbound completion handling rx_rings run in + * separate NAPI contexts. + */ + netif_napi_add(qdev->ndev, &rx_ring->napi, ql_napi_poll_msix, + 64); + cqicb->irq_delay = cpu_to_le16(qdev->rx_coalesce_usecs); + cqicb->pkt_delay = cpu_to_le16(qdev->rx_max_coalesced_frames); + break; + default: + QPRINTK(qdev, IFUP, DEBUG, "Invalid rx_ring->type = %d.\n", + rx_ring->type); + } + QPRINTK(qdev, IFUP, INFO, "Initializing rx work queue.\n"); + err = ql_write_cfg(qdev, cqicb, sizeof(struct cqicb), + CFG_LCQ, rx_ring->cq_id); + if (err) { + QPRINTK(qdev, IFUP, ERR, "Failed to load CQICB.\n"); + return err; + } + QPRINTK(qdev, IFUP, INFO, "Successfully loaded CQICB.\n"); + /* + * Advance the producer index for the buffer queues. + */ + wmb(); + if (rx_ring->lbq_len) + ql_write_db_reg(rx_ring->lbq_prod_idx, + rx_ring->lbq_prod_idx_db_reg); + if (rx_ring->sbq_len) + ql_write_db_reg(rx_ring->sbq_prod_idx, + rx_ring->sbq_prod_idx_db_reg); + return err; +} + +static int ql_start_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring) +{ + struct wqicb *wqicb = (struct wqicb *)tx_ring; + void __iomem *doorbell_area = + qdev->doorbell_area + (DB_PAGE_SIZE * tx_ring->wq_id); + void *shadow_reg = qdev->tx_ring_shadow_reg_area + + (tx_ring->wq_id * sizeof(u64)); + u64 shadow_reg_dma = qdev->tx_ring_shadow_reg_dma + + (tx_ring->wq_id * sizeof(u64)); + int err = 0; + + /* + * Assign doorbell registers for this tx_ring. + */ + /* TX PCI doorbell mem area for tx producer index */ + tx_ring->prod_idx_db_reg = (u32 *) doorbell_area; + tx_ring->prod_idx = 0; + /* TX PCI doorbell mem area + 0x04 */ + tx_ring->valid_db_reg = doorbell_area + 0x04; + + /* + * Assign shadow registers for this tx_ring. + */ + tx_ring->cnsmr_idx_sh_reg = shadow_reg; + tx_ring->cnsmr_idx_sh_reg_dma = shadow_reg_dma; + + wqicb->len = cpu_to_le16(tx_ring->wq_len | Q_LEN_V | Q_LEN_CPP_CONT); + wqicb->flags = cpu_to_le16(Q_FLAGS_LC | + Q_FLAGS_LB | Q_FLAGS_LI | Q_FLAGS_LO); + wqicb->cq_id_rss = cpu_to_le16(tx_ring->cq_id); + wqicb->rid = 0; + wqicb->addr_lo = cpu_to_le32(tx_ring->wq_base_dma); + wqicb->addr_hi = cpu_to_le32((u64) tx_ring->wq_base_dma >> 32); + + wqicb->cnsmr_idx_addr_lo = cpu_to_le32(tx_ring->cnsmr_idx_sh_reg_dma); + wqicb->cnsmr_idx_addr_hi = + cpu_to_le32((u64) tx_ring->cnsmr_idx_sh_reg_dma >> 32); + + ql_init_tx_ring(qdev, tx_ring); + + err = ql_write_cfg(qdev, wqicb, sizeof(wqicb), CFG_LRQ, + (u16) tx_ring->wq_id); + if (err) { + QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n"); + return err; + } + QPRINTK(qdev, IFUP, INFO, "Successfully loaded WQICB.\n"); + return err; +} + +static void ql_disable_msix(struct ql_adapter *qdev) +{ + if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) { + pci_disable_msix(qdev->pdev); + clear_bit(QL_MSIX_ENABLED, &qdev->flags); + kfree(qdev->msi_x_entry); + qdev->msi_x_entry = NULL; + } else if (test_bit(QL_MSI_ENABLED, &qdev->flags)) { + pci_disable_msi(qdev->pdev); + clear_bit(QL_MSI_ENABLED, &qdev->flags); + } +} + +static void ql_enable_msix(struct ql_adapter *qdev) +{ + int i; + + qdev->intr_count = 1; + /* Get the MSIX vectors. */ + if (irq_type == MSIX_IRQ) { + /* Try to alloc space for the msix struct, + * if it fails then go to MSI/legacy. + */ + qdev->msi_x_entry = kcalloc(qdev->rx_ring_count, + sizeof(struct msix_entry), + GFP_KERNEL); + if (!qdev->msi_x_entry) { + irq_type = MSI_IRQ; + goto msi; + } + + for (i = 0; i < qdev->rx_ring_count; i++) + qdev->msi_x_entry[i].entry = i; + + if (!pci_enable_msix + (qdev->pdev, qdev->msi_x_entry, qdev->rx_ring_count)) { + set_bit(QL_MSIX_ENABLED, &qdev->flags); + qdev->intr_count = qdev->rx_ring_count; + QPRINTK(qdev, IFUP, INFO, + "MSI-X Enabled, got %d vectors.\n", + qdev->intr_count); + return; + } else { + kfree(qdev->msi_x_entry); + qdev->msi_x_entry = NULL; + QPRINTK(qdev, IFUP, WARNING, + "MSI-X Enable failed, trying MSI.\n"); + irq_type = MSI_IRQ; + } + } +msi: + if (irq_type == MSI_IRQ) { + if (!pci_enable_msi(qdev->pdev)) { + set_bit(QL_MSI_ENABLED, &qdev->flags); + QPRINTK(qdev, IFUP, INFO, + "Running with MSI interrupts.\n"); + return; + } + } + irq_type = LEG_IRQ; + spin_lock_init(&qdev->legacy_lock); + qdev->legacy_check = ql_legacy_check; + QPRINTK(qdev, IFUP, DEBUG, "Running with legacy interrupts.\n"); +} + +/* + * Here we build the intr_context structures based on + * our rx_ring count and intr vector count. + * The intr_context structure is used to hook each vector + * to possibly different handlers. + */ +static void ql_resolve_queues_to_irqs(struct ql_adapter *qdev) +{ + int i = 0; + struct intr_context *intr_context = &qdev->intr_context[0]; + + ql_enable_msix(qdev); + + if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) { + /* Each rx_ring has it's + * own intr_context since we have separate + * vectors for each queue. + * This only true when MSI-X is enabled. + */ + for (i = 0; i < qdev->intr_count; i++, intr_context++) { + qdev->rx_ring[i].irq = i; + intr_context->intr = i; + intr_context->qdev = qdev; + /* + * We set up each vectors enable/disable/read bits so + * there's no bit/mask calculations in the critical path. + */ + intr_context->intr_en_mask = + INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | + INTR_EN_TYPE_ENABLE | INTR_EN_IHD_MASK | INTR_EN_IHD + | i; + intr_context->intr_dis_mask = + INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | + INTR_EN_TYPE_DISABLE | INTR_EN_IHD_MASK | + INTR_EN_IHD | i; + intr_context->intr_read_mask = + INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | + INTR_EN_TYPE_READ | INTR_EN_IHD_MASK | INTR_EN_IHD | + i; + + if (i == 0) { + /* + * Default queue handles bcast/mcast plus + * async events. Needs buffers. + */ + intr_context->handler = qlge_isr; + sprintf(intr_context->name, "%s-default-queue", + qdev->ndev->name); + } else if (i < qdev->rss_ring_first_cq_id) { + /* + * Outbound queue is for outbound completions only. + */ + intr_context->handler = qlge_msix_tx_isr; + sprintf(intr_context->name, "%s-txq-%d", + qdev->ndev->name, i); + } else { + /* + * Inbound queues handle unicast frames only. + */ + intr_context->handler = qlge_msix_rx_isr; + sprintf(intr_context->name, "%s-rxq-%d", + qdev->ndev->name, i); + } + } + } else { + /* + * All rx_rings use the same intr_context since + * there is only one vector. + */ + intr_context->intr = 0; + intr_context->qdev = qdev; + /* + * We set up each vectors enable/disable/read bits so + * there's no bit/mask calculations in the critical path. + */ + intr_context->intr_en_mask = + INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_ENABLE; + intr_context->intr_dis_mask = + INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | + INTR_EN_TYPE_DISABLE; + intr_context->intr_read_mask = + INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_READ; + /* + * Single interrupt means one handler for all rings. + */ + intr_context->handler = qlge_isr; + sprintf(intr_context->name, "%s-single_irq", qdev->ndev->name); + for (i = 0; i < qdev->rx_ring_count; i++) + qdev->rx_ring[i].irq = 0; + } +} + +static void ql_free_irq(struct ql_adapter *qdev) +{ + int i; + struct intr_context *intr_context = &qdev->intr_context[0]; + + for (i = 0; i < qdev->intr_count; i++, intr_context++) { + if (intr_context->hooked) { + if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) { + free_irq(qdev->msi_x_entry[i].vector, + &qdev->rx_ring[i]); + QPRINTK(qdev, IFDOWN, ERR, + "freeing msix interrupt %d.\n", i); + } else { + free_irq(qdev->pdev->irq, &qdev->rx_ring[0]); + QPRINTK(qdev, IFDOWN, ERR, + "freeing msi interrupt %d.\n", i); + } + } + } + ql_disable_msix(qdev); +} + +static int ql_request_irq(struct ql_adapter *qdev) +{ + int i; + int status = 0; + struct pci_dev *pdev = qdev->pdev; + struct intr_context *intr_context = &qdev->intr_context[0]; + + ql_resolve_queues_to_irqs(qdev); + + for (i = 0; i < qdev->intr_count; i++, intr_context++) { + atomic_set(&intr_context->irq_cnt, 0); + if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) { + status = request_irq(qdev->msi_x_entry[i].vector, + intr_context->handler, + 0, + intr_context->name, + &qdev->rx_ring[i]); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Failed request for MSIX interrupt %d.\n", + i); + goto err_irq; + } else { + QPRINTK(qdev, IFUP, INFO, + "Hooked intr %d, queue type %s%s%s, with name %s.\n", + i, + qdev->rx_ring[i].type == + DEFAULT_Q ? "DEFAULT_Q" : "", + qdev->rx_ring[i].type == + TX_Q ? "TX_Q" : "", + qdev->rx_ring[i].type == + RX_Q ? "RX_Q" : "", intr_context->name); + } + } else { + QPRINTK(qdev, IFUP, DEBUG, + "trying msi or legacy interrupts.\n"); + QPRINTK(qdev, IFUP, DEBUG, + "%s: irq = %d.\n", __func__, pdev->irq); + QPRINTK(qdev, IFUP, DEBUG, + "%s: context->name = %s.\n", __func__, + intr_context->name); + QPRINTK(qdev, IFUP, DEBUG, + "%s: dev_id = 0x%p.\n", __func__, + &qdev->rx_ring[0]); + status = + request_irq(pdev->irq, qlge_isr, + test_bit(QL_MSI_ENABLED, + &qdev-> + flags) ? 0 : IRQF_SHARED, + intr_context->name, &qdev->rx_ring[0]); + if (status) + goto err_irq; + + QPRINTK(qdev, IFUP, ERR, + "Hooked intr %d, queue type %s%s%s, with name %s.\n", + i, + qdev->rx_ring[0].type == + DEFAULT_Q ? "DEFAULT_Q" : "", + qdev->rx_ring[0].type == TX_Q ? "TX_Q" : "", + qdev->rx_ring[0].type == RX_Q ? "RX_Q" : "", + intr_context->name); + } + intr_context->hooked = 1; + } + return status; +err_irq: + QPRINTK(qdev, IFUP, ERR, "Failed to get the interrupts!!!/n"); + ql_free_irq(qdev); + return status; +} + +static int ql_start_rss(struct ql_adapter *qdev) +{ + struct ricb *ricb = &qdev->ricb; + int status = 0; + int i; + u8 *hash_id = (u8 *) ricb->hash_cq_id; + + memset((void *)ricb, 0, sizeof(ricb)); + + ricb->base_cq = qdev->rss_ring_first_cq_id | RSS_L4K; + ricb->flags = + (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RI4 | RSS_RI6 | RSS_RT4 | + RSS_RT6); + ricb->mask = cpu_to_le16(qdev->rss_ring_count - 1); + + /* + * Fill out the Indirection Table. + */ + for (i = 0; i < 32; i++) + hash_id[i] = i & 1; + + /* + * Random values for the IPv6 and IPv4 Hash Keys. + */ + get_random_bytes((void *)&ricb->ipv6_hash_key[0], 40); + get_random_bytes((void *)&ricb->ipv4_hash_key[0], 16); + + QPRINTK(qdev, IFUP, INFO, "Initializing RSS.\n"); + + status = ql_write_cfg(qdev, ricb, sizeof(ricb), CFG_LR, 0); + if (status) { + QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n"); + return status; + } + QPRINTK(qdev, IFUP, INFO, "Successfully loaded RICB.\n"); + return status; +} + +/* Initialize the frame-to-queue routing. */ +static int ql_route_initialize(struct ql_adapter *qdev) +{ + int status = 0; + int i; + + /* Clear all the entries in the routing table. */ + for (i = 0; i < 16; i++) { + status = ql_set_routing_reg(qdev, i, 0, 0); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Failed to init routing register for CAM packets.\n"); + return status; + } + } + + status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Failed to init routing register for error packets.\n"); + return status; + } + status = ql_set_routing_reg(qdev, RT_IDX_BCAST_SLOT, RT_IDX_BCAST, 1); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Failed to init routing register for broadcast packets.\n"); + return status; + } + /* If we have more than one inbound queue, then turn on RSS in the + * routing block. + */ + if (qdev->rss_ring_count > 1) { + status = ql_set_routing_reg(qdev, RT_IDX_RSS_MATCH_SLOT, + RT_IDX_RSS_MATCH, 1); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Failed to init routing register for MATCH RSS packets.\n"); + return status; + } + } + + status = ql_set_routing_reg(qdev, RT_IDX_CAM_HIT_SLOT, + RT_IDX_CAM_HIT, 1); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Failed to init routing register for CAM packets.\n"); + return status; + } + return status; +} + +static int ql_adapter_initialize(struct ql_adapter *qdev) +{ + u32 value, mask; + int i; + int status = 0; + + /* + * Set up the System register to halt on errors. + */ + value = SYS_EFE | SYS_FAE; + mask = value << 16; + ql_write32(qdev, SYS, mask | value); + + /* Set the default queue. */ + value = NIC_RCV_CFG_DFQ; + mask = NIC_RCV_CFG_DFQ_MASK; + ql_write32(qdev, NIC_RCV_CFG, (mask | value)); + + /* Set the MPI interrupt to enabled. */ + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); + + /* Enable the function, set pagesize, enable error checking. */ + value = FSC_FE | FSC_EPC_INBOUND | FSC_EPC_OUTBOUND | + FSC_EC | FSC_VM_PAGE_4K | FSC_SH; + + /* Set/clear header splitting. */ + mask = FSC_VM_PAGESIZE_MASK | + FSC_DBL_MASK | FSC_DBRST_MASK | (value << 16); + ql_write32(qdev, FSC, mask | value); + + ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP | + min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE)); + + /* Start up the rx queues. */ + for (i = 0; i < qdev->rx_ring_count; i++) { + status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Failed to start rx ring[%d].\n", i); + return status; + } + } + + /* If there is more than one inbound completion queue + * then download a RICB to configure RSS. + */ + if (qdev->rss_ring_count > 1) { + status = ql_start_rss(qdev); + if (status) { + QPRINTK(qdev, IFUP, ERR, "Failed to start RSS.\n"); + return status; + } + } + + /* Start up the tx queues. */ + for (i = 0; i < qdev->tx_ring_count; i++) { + status = ql_start_tx_ring(qdev, &qdev->tx_ring[i]); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Failed to start tx ring[%d].\n", i); + return status; + } + } + + status = ql_port_initialize(qdev); + if (status) { + QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n"); + return status; + } + + status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr, + MAC_ADDR_TYPE_CAM_MAC, qdev->func); + if (status) { + QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n"); + return status; + } + + status = ql_route_initialize(qdev); + if (status) { + QPRINTK(qdev, IFUP, ERR, "Failed to init routing table.\n"); + return status; + } + + /* Start NAPI for the RSS queues. */ + for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++) { + QPRINTK(qdev, IFUP, INFO, "Enabling NAPI for rx_ring[%d].\n", + i); + napi_enable(&qdev->rx_ring[i].napi); + } + + return status; +} + +/* Issue soft reset to chip. */ +static int ql_adapter_reset(struct ql_adapter *qdev) +{ + u32 value; + int max_wait_time; + int status = 0; + int resetCnt = 0; + +#define MAX_RESET_CNT 1 +issueReset: + resetCnt++; + QPRINTK(qdev, IFDOWN, DEBUG, "Issue soft reset to chip.\n"); + ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR); + /* Wait for reset to complete. */ + max_wait_time = 3; + QPRINTK(qdev, IFDOWN, DEBUG, "Wait %d seconds for reset to complete.\n", + max_wait_time); + do { + value = ql_read32(qdev, RST_FO); + if ((value & RST_FO_FR) == 0) + break; + + ssleep(1); + } while ((--max_wait_time)); + if (value & RST_FO_FR) { + QPRINTK(qdev, IFDOWN, ERR, + "Stuck in SoftReset: FSC_SR:0x%08x\n", value); + if (resetCnt < MAX_RESET_CNT) + goto issueReset; + } + if (max_wait_time == 0) { + status = -ETIMEDOUT; + QPRINTK(qdev, IFDOWN, ERR, + "ETIMEOUT!!! errored out of resetting the chip!\n"); + } + + return status; +} + +static void ql_display_dev_info(struct net_device *ndev) +{ + struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev); + + QPRINTK(qdev, PROBE, INFO, + "Function #%d, NIC Roll %d, NIC Rev = %d, " + "XG Roll = %d, XG Rev = %d.\n", + qdev->func, + qdev->chip_rev_id & 0x0000000f, + qdev->chip_rev_id >> 4 & 0x0000000f, + qdev->chip_rev_id >> 8 & 0x0000000f, + qdev->chip_rev_id >> 12 & 0x0000000f); + QPRINTK(qdev, PROBE, INFO, + "MAC address %02x:%02x:%02x:%02x:%02x:%02x\n", + ndev->dev_addr[0], ndev->dev_addr[1], + ndev->dev_addr[2], ndev->dev_addr[3], ndev->dev_addr[4], + ndev->dev_addr[5]); +} + +static int ql_adapter_down(struct ql_adapter *qdev) +{ + struct net_device *ndev = qdev->ndev; + int i, status = 0; + struct rx_ring *rx_ring; + + netif_stop_queue(ndev); + netif_carrier_off(ndev); + + cancel_delayed_work_sync(&qdev->asic_reset_work); + cancel_delayed_work_sync(&qdev->mpi_reset_work); + cancel_delayed_work_sync(&qdev->mpi_work); + + /* The default queue at index 0 is always processed in + * a workqueue. + */ + cancel_delayed_work_sync(&qdev->rx_ring[0].rx_work); + + /* The rest of the rx_rings are processed in + * a workqueue only if it's a single interrupt + * environment (MSI/Legacy). + */ + for (i = 1; i > qdev->rx_ring_count; i++) { + rx_ring = &qdev->rx_ring[i]; + /* Only the RSS rings use NAPI on multi irq + * environment. Outbound completion processing + * is done in interrupt context. + */ + if (i >= qdev->rss_ring_first_cq_id) { + napi_disable(&rx_ring->napi); + } else { + cancel_delayed_work_sync(&rx_ring->rx_work); + } + } + + clear_bit(QL_ADAPTER_UP, &qdev->flags); + + ql_disable_interrupts(qdev); + + ql_tx_ring_clean(qdev); + + spin_lock(&qdev->hw_lock); + status = ql_adapter_reset(qdev); + if (status) + QPRINTK(qdev, IFDOWN, ERR, "reset(func #%d) FAILED!\n", + qdev->func); + spin_unlock(&qdev->hw_lock); + return status; +} + +static int ql_adapter_up(struct ql_adapter *qdev) +{ + int err = 0; + + spin_lock(&qdev->hw_lock); + err = ql_adapter_initialize(qdev); + if (err) { + QPRINTK(qdev, IFUP, INFO, "Unable to initialize adapter.\n"); + spin_unlock(&qdev->hw_lock); + goto err_init; + } + spin_unlock(&qdev->hw_lock); + set_bit(QL_ADAPTER_UP, &qdev->flags); + ql_enable_interrupts(qdev); + ql_enable_all_completion_interrupts(qdev); + if ((ql_read32(qdev, STS) & qdev->port_init)) { + netif_carrier_on(qdev->ndev); + netif_start_queue(qdev->ndev); + } + + return 0; +err_init: + ql_adapter_reset(qdev); + return err; +} + +static int ql_cycle_adapter(struct ql_adapter *qdev) +{ + int status; + + status = ql_adapter_down(qdev); + if (status) + goto error; + + status = ql_adapter_up(qdev); + if (status) + goto error; + + return status; +error: + QPRINTK(qdev, IFUP, ALERT, + "Driver up/down cycle failed, closing device\n"); + rtnl_lock(); + dev_close(qdev->ndev); + rtnl_unlock(); + return status; +} + +static void ql_release_adapter_resources(struct ql_adapter *qdev) +{ + ql_free_mem_resources(qdev); + ql_free_irq(qdev); +} + +static int ql_get_adapter_resources(struct ql_adapter *qdev) +{ + int status = 0; + + if (ql_alloc_mem_resources(qdev)) { + QPRINTK(qdev, IFUP, ERR, "Unable to allocate memory.\n"); + return -ENOMEM; + } + status = ql_request_irq(qdev); + if (status) + goto err_irq; + return status; +err_irq: + ql_free_mem_resources(qdev); + return status; +} + +static int qlge_close(struct net_device *ndev) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + + /* + * Wait for device to recover from a reset. + * (Rarely happens, but possible.) + */ + while (!test_bit(QL_ADAPTER_UP, &qdev->flags)) + msleep(1); + ql_adapter_down(qdev); + ql_release_adapter_resources(qdev); + ql_free_ring_cb(qdev); + return 0; +} + +static int ql_configure_rings(struct ql_adapter *qdev) +{ + int i; + struct rx_ring *rx_ring; + struct tx_ring *tx_ring; + int cpu_cnt = num_online_cpus(); + + /* + * For each processor present we allocate one + * rx_ring for outbound completions, and one + * rx_ring for inbound completions. Plus there is + * always the one default queue. For the CPU + * counts we end up with the following rx_rings: + * rx_ring count = + * one default queue + + * (CPU count * outbound completion rx_ring) + + * (CPU count * inbound (RSS) completion rx_ring) + * To keep it simple we limit the total number of + * queues to < 32, so we truncate CPU to 8. + * This limitation can be removed when requested. + */ + + if (cpu_cnt > 8) + cpu_cnt = 8; + + /* + * rx_ring[0] is always the default queue. + */ + /* Allocate outbound completion ring for each CPU. */ + qdev->tx_ring_count = cpu_cnt; + /* Allocate inbound completion (RSS) ring for each CPU. */ + qdev->rss_ring_count = cpu_cnt; + /* cq_id for the first inbound ring handler. */ + qdev->rss_ring_first_cq_id = cpu_cnt + 1; + /* + * qdev->rx_ring_count: + * Total number of rx_rings. This includes the one + * default queue, a number of outbound completion + * handler rx_rings, and the number of inbound + * completion handler rx_rings. + */ + qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count + 1; + + if (ql_alloc_ring_cb(qdev)) + return -ENOMEM; + + for (i = 0; i < qdev->tx_ring_count; i++) { + tx_ring = &qdev->tx_ring[i]; + memset((void *)tx_ring, 0, sizeof(tx_ring)); + tx_ring->qdev = qdev; + tx_ring->wq_id = i; + tx_ring->wq_len = qdev->tx_ring_size; + tx_ring->wq_size = + tx_ring->wq_len * sizeof(struct ob_mac_iocb_req); + + /* + * The completion queue ID for the tx rings start + * immediately after the default Q ID, which is zero. + */ + tx_ring->cq_id = i + 1; + } + + for (i = 0; i < qdev->rx_ring_count; i++) { + rx_ring = &qdev->rx_ring[i]; + memset((void *)rx_ring, 0, sizeof(rx_ring)); + rx_ring->qdev = qdev; + rx_ring->cq_id = i; + rx_ring->cpu = i % cpu_cnt; /* CPU to run handler on. */ + if (i == 0) { /* Default queue at index 0. */ + /* + * Default queue handles bcast/mcast plus + * async events. Needs buffers. + */ + rx_ring->cq_len = qdev->rx_ring_size; + rx_ring->cq_size = + rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb); + rx_ring->lbq_len = NUM_LARGE_BUFFERS; + rx_ring->lbq_size = + rx_ring->lbq_len * sizeof(struct bq_element); + rx_ring->lbq_buf_size = LARGE_BUFFER_SIZE; + rx_ring->sbq_len = NUM_SMALL_BUFFERS; + rx_ring->sbq_size = + rx_ring->sbq_len * sizeof(struct bq_element); + rx_ring->sbq_buf_size = SMALL_BUFFER_SIZE * 2; + rx_ring->type = DEFAULT_Q; + } else if (i < qdev->rss_ring_first_cq_id) { + /* + * Outbound queue handles outbound completions only. + */ + /* outbound cq is same size as tx_ring it services. */ + rx_ring->cq_len = qdev->tx_ring_size; + rx_ring->cq_size = + rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb); + rx_ring->lbq_len = 0; + rx_ring->lbq_size = 0; + rx_ring->lbq_buf_size = 0; + rx_ring->sbq_len = 0; + rx_ring->sbq_size = 0; + rx_ring->sbq_buf_size = 0; + rx_ring->type = TX_Q; + } else { /* Inbound completions (RSS) queues */ + /* + * Inbound queues handle unicast frames only. + */ + rx_ring->cq_len = qdev->rx_ring_size; + rx_ring->cq_size = + rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb); + rx_ring->lbq_len = NUM_LARGE_BUFFERS; + rx_ring->lbq_size = + rx_ring->lbq_len * sizeof(struct bq_element); + rx_ring->lbq_buf_size = LARGE_BUFFER_SIZE; + rx_ring->sbq_len = NUM_SMALL_BUFFERS; + rx_ring->sbq_size = + rx_ring->sbq_len * sizeof(struct bq_element); + rx_ring->sbq_buf_size = SMALL_BUFFER_SIZE * 2; + rx_ring->type = RX_Q; + } + } + return 0; +} + +static int qlge_open(struct net_device *ndev) +{ + int err = 0; + struct ql_adapter *qdev = netdev_priv(ndev); + + err = ql_configure_rings(qdev); + if (err) + return err; + + err = ql_get_adapter_resources(qdev); + if (err) + goto error_up; + + err = ql_adapter_up(qdev); + if (err) + goto error_up; + + return err; + +error_up: + ql_release_adapter_resources(qdev); + ql_free_ring_cb(qdev); + return err; +} + +static int qlge_change_mtu(struct net_device *ndev, int new_mtu) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + + if (ndev->mtu == 1500 && new_mtu == 9000) { + QPRINTK(qdev, IFUP, ERR, "Changing to jumbo MTU.\n"); + } else if (ndev->mtu == 9000 && new_mtu == 1500) { + QPRINTK(qdev, IFUP, ERR, "Changing to normal MTU.\n"); + } else if ((ndev->mtu == 1500 && new_mtu == 1500) || + (ndev->mtu == 9000 && new_mtu == 9000)) { + return 0; + } else + return -EINVAL; + ndev->mtu = new_mtu; + return 0; +} + +static struct net_device_stats *qlge_get_stats(struct net_device + *ndev) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + return &qdev->stats; +} + +static void qlge_set_multicast_list(struct net_device *ndev) +{ + struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev); + struct dev_mc_list *mc_ptr; + int i; + + spin_lock(&qdev->hw_lock); + /* + * Set or clear promiscuous mode if a + * transition is taking place. + */ + if (ndev->flags & IFF_PROMISC) { + if (!test_bit(QL_PROMISCUOUS, &qdev->flags)) { + if (ql_set_routing_reg + (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 1)) { + QPRINTK(qdev, HW, ERR, + "Failed to set promiscous mode.\n"); + } else { + set_bit(QL_PROMISCUOUS, &qdev->flags); + } + } + } else { + if (test_bit(QL_PROMISCUOUS, &qdev->flags)) { + if (ql_set_routing_reg + (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 0)) { + QPRINTK(qdev, HW, ERR, + "Failed to clear promiscous mode.\n"); + } else { + clear_bit(QL_PROMISCUOUS, &qdev->flags); + } + } + } + + /* + * Set or clear all multicast mode if a + * transition is taking place. + */ + if ((ndev->flags & IFF_ALLMULTI) || + (ndev->mc_count > MAX_MULTICAST_ENTRIES)) { + if (!test_bit(QL_ALLMULTI, &qdev->flags)) { + if (ql_set_routing_reg + (qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 1)) { + QPRINTK(qdev, HW, ERR, + "Failed to set all-multi mode.\n"); + } else { + set_bit(QL_ALLMULTI, &qdev->flags); + } + } + } else { + if (test_bit(QL_ALLMULTI, &qdev->flags)) { + if (ql_set_routing_reg + (qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 0)) { + QPRINTK(qdev, HW, ERR, + "Failed to clear all-multi mode.\n"); + } else { + clear_bit(QL_ALLMULTI, &qdev->flags); + } + } + } + + if (ndev->mc_count) { + for (i = 0, mc_ptr = ndev->mc_list; mc_ptr; + i++, mc_ptr = mc_ptr->next) + if (ql_set_mac_addr_reg(qdev, (u8 *) mc_ptr->dmi_addr, + MAC_ADDR_TYPE_MULTI_MAC, i)) { + QPRINTK(qdev, HW, ERR, + "Failed to loadmulticast address.\n"); + goto exit; + } + if (ql_set_routing_reg + (qdev, RT_IDX_MCAST_MATCH_SLOT, RT_IDX_MCAST_MATCH, 1)) { + QPRINTK(qdev, HW, ERR, + "Failed to set multicast match mode.\n"); + } else { + set_bit(QL_ALLMULTI, &qdev->flags); + } + } +exit: + spin_unlock(&qdev->hw_lock); +} + +static int qlge_set_mac_address(struct net_device *ndev, void *p) +{ + struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev); + struct sockaddr *addr = p; + + if (netif_running(ndev)) + return -EBUSY; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); + + spin_lock(&qdev->hw_lock); + if (ql_set_mac_addr_reg(qdev, (u8 *) ndev->dev_addr, + MAC_ADDR_TYPE_CAM_MAC, qdev->func)) {/* Unicast */ + QPRINTK(qdev, HW, ERR, "Failed to load MAC address.\n"); + return -1; + } + spin_unlock(&qdev->hw_lock); + + return 0; +} + +static void qlge_tx_timeout(struct net_device *ndev) +{ + struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev); + queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0); +} + +static void ql_asic_reset_work(struct work_struct *work) +{ + struct ql_adapter *qdev = + container_of(work, struct ql_adapter, asic_reset_work.work); + ql_cycle_adapter(qdev); +} + +static void ql_get_board_info(struct ql_adapter *qdev) +{ + qdev->func = + (ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT; + if (qdev->func) { + qdev->xg_sem_mask = SEM_XGMAC1_MASK; + qdev->port_link_up = STS_PL1; + qdev->port_init = STS_PI1; + qdev->mailbox_in = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC2_MBI; + qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC2_MBO; + } else { + qdev->xg_sem_mask = SEM_XGMAC0_MASK; + qdev->port_link_up = STS_PL0; + qdev->port_init = STS_PI0; + qdev->mailbox_in = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBI; + qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBO; + } + qdev->chip_rev_id = ql_read32(qdev, REV_ID); +} + +static void ql_release_all(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + struct ql_adapter *qdev = netdev_priv(ndev); + + if (qdev->workqueue) { + destroy_workqueue(qdev->workqueue); + qdev->workqueue = NULL; + } + if (qdev->q_workqueue) { + destroy_workqueue(qdev->q_workqueue); + qdev->q_workqueue = NULL; + } + if (qdev->reg_base) + iounmap((void *)qdev->reg_base); + if (qdev->doorbell_area) + iounmap(qdev->doorbell_area); + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); +} + +static int __devinit ql_init_device(struct pci_dev *pdev, + struct net_device *ndev, int cards_found) +{ + struct ql_adapter *qdev = netdev_priv(ndev); + int pos, err = 0; + u16 val16; + + memset((void *)qdev, 0, sizeof(qdev)); + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "PCI device enable failed.\n"); + return err; + } + + pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); + if (pos <= 0) { + dev_err(&pdev->dev, PFX "Cannot find PCI Express capability, " + "aborting.\n"); + goto err_out; + } else { + pci_read_config_word(pdev, pos + PCI_EXP_DEVCTL, &val16); + val16 &= ~PCI_EXP_DEVCTL_NOSNOOP_EN; + val16 |= (PCI_EXP_DEVCTL_CERE | + PCI_EXP_DEVCTL_NFERE | + PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE); + pci_write_config_word(pdev, pos + PCI_EXP_DEVCTL, val16); + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + dev_err(&pdev->dev, "PCI region request failed.\n"); + goto err_out; + } + + pci_set_master(pdev); + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + set_bit(QL_DMA64, &qdev->flags); + err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + } else { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + } + + if (err) { + dev_err(&pdev->dev, "No usable DMA configuration.\n"); + goto err_out; + } + + pci_set_drvdata(pdev, ndev); + qdev->reg_base = + ioremap_nocache(pci_resource_start(pdev, 1), + pci_resource_len(pdev, 1)); + if (!qdev->reg_base) { + dev_err(&pdev->dev, "Register mapping failed.\n"); + err = -ENOMEM; + goto err_out; + } + + qdev->doorbell_area_size = pci_resource_len(pdev, 3); + qdev->doorbell_area = + ioremap_nocache(pci_resource_start(pdev, 3), + pci_resource_len(pdev, 3)); + if (!qdev->doorbell_area) { + dev_err(&pdev->dev, "Doorbell register mapping failed.\n"); + err = -ENOMEM; + goto err_out; + } + + ql_get_board_info(qdev); + qdev->ndev = ndev; + qdev->pdev = pdev; + qdev->msg_enable = netif_msg_init(debug, default_msg); + spin_lock_init(&qdev->hw_lock); + spin_lock_init(&qdev->stats_lock); + + /* make sure the EEPROM is good */ + err = ql_get_flash_params(qdev); + if (err) { + dev_err(&pdev->dev, "Invalid FLASH.\n"); + goto err_out; + } + + if (!is_valid_ether_addr(qdev->flash.mac_addr)) + goto err_out; + + memcpy(ndev->dev_addr, qdev->flash.mac_addr, ndev->addr_len); + memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); + + /* Set up the default ring sizes. */ + qdev->tx_ring_size = NUM_TX_RING_ENTRIES; + qdev->rx_ring_size = NUM_RX_RING_ENTRIES; + + /* Set up the coalescing parameters. */ + qdev->rx_coalesce_usecs = DFLT_COALESCE_WAIT; + qdev->tx_coalesce_usecs = DFLT_COALESCE_WAIT; + qdev->rx_max_coalesced_frames = DFLT_INTER_FRAME_WAIT; + qdev->tx_max_coalesced_frames = DFLT_INTER_FRAME_WAIT; + + /* + * Set up the operating parameters. + */ + qdev->rx_csum = 1; + + qdev->q_workqueue = create_workqueue(ndev->name); + qdev->workqueue = create_singlethread_workqueue(ndev->name); + INIT_DELAYED_WORK(&qdev->asic_reset_work, ql_asic_reset_work); + INIT_DELAYED_WORK(&qdev->mpi_reset_work, ql_mpi_reset_work); + INIT_DELAYED_WORK(&qdev->mpi_work, ql_mpi_work); + + if (!cards_found) { + dev_info(&pdev->dev, "%s\n", DRV_STRING); + dev_info(&pdev->dev, "Driver name: %s, Version: %s.\n", + DRV_NAME, DRV_VERSION); + } + return 0; +err_out: + ql_release_all(pdev); + pci_disable_device(pdev); + return err; +} + +static int __devinit qlge_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_entry) +{ + struct net_device *ndev = NULL; + struct ql_adapter *qdev = NULL; + static int cards_found = 0; + int err = 0; + + ndev = alloc_etherdev(sizeof(struct ql_adapter)); + if (!ndev) + return -ENOMEM; + + err = ql_init_device(pdev, ndev, cards_found); + if (err < 0) { + free_netdev(ndev); + return err; + } + + qdev = netdev_priv(ndev); + SET_NETDEV_DEV(ndev, &pdev->dev); + ndev->features = (0 + | NETIF_F_IP_CSUM + | NETIF_F_SG + | NETIF_F_TSO + | NETIF_F_TSO6 + | NETIF_F_TSO_ECN + | NETIF_F_HW_VLAN_TX + | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER); + + if (test_bit(QL_DMA64, &qdev->flags)) + ndev->features |= NETIF_F_HIGHDMA; + + /* + * Set up net_device structure. + */ + ndev->tx_queue_len = qdev->tx_ring_size; + ndev->irq = pdev->irq; + ndev->open = qlge_open; + ndev->stop = qlge_close; + ndev->hard_start_xmit = qlge_send; + SET_ETHTOOL_OPS(ndev, &qlge_ethtool_ops); + ndev->change_mtu = qlge_change_mtu; + ndev->get_stats = qlge_get_stats; + ndev->set_multicast_list = qlge_set_multicast_list; + ndev->set_mac_address = qlge_set_mac_address; + ndev->tx_timeout = qlge_tx_timeout; + ndev->watchdog_timeo = 10 * HZ; + ndev->vlan_rx_register = ql_vlan_rx_register; + ndev->vlan_rx_add_vid = ql_vlan_rx_add_vid; + ndev->vlan_rx_kill_vid = ql_vlan_rx_kill_vid; + err = register_netdev(ndev); + if (err) { + dev_err(&pdev->dev, "net device registration failed.\n"); + ql_release_all(pdev); + pci_disable_device(pdev); + return err; + } + netif_carrier_off(ndev); + netif_stop_queue(ndev); + ql_display_dev_info(ndev); + cards_found++; + return 0; +} + +static void __devexit qlge_remove(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + unregister_netdev(ndev); + ql_release_all(pdev); + pci_disable_device(pdev); + free_netdev(ndev); +} + +/* + * This callback is called by the PCI subsystem whenever + * a PCI bus error is detected. + */ +static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev, + enum pci_channel_state state) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + struct ql_adapter *qdev = netdev_priv(ndev); + + if (netif_running(ndev)) + ql_adapter_down(qdev); + + pci_disable_device(pdev); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/* + * This callback is called after the PCI buss has been reset. + * Basically, this tries to restart the card from scratch. + * This is a shortened version of the device probe/discovery code, + * it resembles the first-half of the () routine. + */ +static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + struct ql_adapter *qdev = netdev_priv(ndev); + + if (pci_enable_device(pdev)) { + QPRINTK(qdev, IFUP, ERR, + "Cannot re-enable PCI device after reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + + netif_carrier_off(ndev); + netif_stop_queue(ndev); + ql_adapter_reset(qdev); + + /* Make sure the EEPROM is good */ + memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); + + if (!is_valid_ether_addr(ndev->perm_addr)) { + QPRINTK(qdev, IFUP, ERR, "After reset, invalid MAC address.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + return PCI_ERS_RESULT_RECOVERED; +} + +static void qlge_io_resume(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + struct ql_adapter *qdev = netdev_priv(ndev); + + pci_set_master(pdev); + + if (netif_running(ndev)) { + if (ql_adapter_up(qdev)) { + QPRINTK(qdev, IFUP, ERR, + "Device initialization failed after reset.\n"); + return; + } + } + + netif_device_attach(ndev); +} + +static struct pci_error_handlers qlge_err_handler = { + .error_detected = qlge_io_error_detected, + .slot_reset = qlge_io_slot_reset, + .resume = qlge_io_resume, +}; + +static int qlge_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + struct ql_adapter *qdev = netdev_priv(ndev); + int err; + + netif_device_detach(ndev); + + if (netif_running(ndev)) { + err = ql_adapter_down(qdev); + if (!err) + return err; + } + + err = pci_save_state(pdev); + if (err) + return err; + + pci_disable_device(pdev); + + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int qlge_resume(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + struct ql_adapter *qdev = netdev_priv(ndev); + int err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + err = pci_enable_device(pdev); + if (err) { + QPRINTK(qdev, IFUP, ERR, "Cannot enable PCI device from suspend\n"); + return err; + } + pci_set_master(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + if (netif_running(ndev)) { + err = ql_adapter_up(qdev); + if (err) + return err; + } + + netif_device_attach(ndev); + + return 0; +} + +static void qlge_shutdown(struct pci_dev *pdev) +{ + qlge_suspend(pdev, PMSG_SUSPEND); +} + +static struct pci_driver qlge_driver = { + .name = DRV_NAME, + .id_table = qlge_pci_tbl, + .probe = qlge_probe, + .remove = __devexit_p(qlge_remove), +#ifdef CONFIG_PM + .suspend = qlge_suspend, + .resume = qlge_resume, +#endif + .shutdown = qlge_shutdown, + .err_handler = &qlge_err_handler +}; + +static int __init qlge_init_module(void) +{ + return pci_register_driver(&qlge_driver); +} + +static void __exit qlge_exit(void) +{ + pci_unregister_driver(&qlge_driver); +} + +module_init(qlge_init_module); +module_exit(qlge_exit); diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c new file mode 100644 index 00000000000..24fe344bcf1 --- /dev/null +++ b/drivers/net/qlge/qlge_mpi.c @@ -0,0 +1,150 @@ +#include "qlge.h" + +static int ql_read_mbox_reg(struct ql_adapter *qdev, u32 reg, u32 *data) +{ + int status; + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR); + if (status) + goto exit; + /* set up for reg read */ + ql_write32(qdev, PROC_ADDR, reg | PROC_ADDR_R); + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR); + if (status) + goto exit; + /* get the data */ + *data = ql_read32(qdev, PROC_DATA); +exit: + return status; +} + +int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp) +{ + int i, status; + + status = ql_sem_spinlock(qdev, SEM_PROC_REG_MASK); + if (status) + return -EBUSY; + for (i = 0; i < mbcp->out_count; i++) { + status = + ql_read_mbox_reg(qdev, qdev->mailbox_out + i, + &mbcp->mbox_out[i]); + if (status) { + QPRINTK(qdev, DRV, ERR, "Failed mailbox read.\n"); + break; + } + } + ql_sem_unlock(qdev, SEM_PROC_REG_MASK); /* does flush too */ + return status; +} + +static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp) +{ + mbcp->out_count = 2; + + if (ql_get_mb_sts(qdev, mbcp)) + goto exit; + + qdev->link_status = mbcp->mbox_out[1]; + QPRINTK(qdev, DRV, ERR, "Link Up.\n"); + QPRINTK(qdev, DRV, INFO, "Link Status = 0x%.08x.\n", mbcp->mbox_out[1]); + if (!netif_carrier_ok(qdev->ndev)) { + QPRINTK(qdev, LINK, INFO, "Link is Up.\n"); + netif_carrier_on(qdev->ndev); + netif_wake_queue(qdev->ndev); + } +exit: + /* Clear the MPI firmware status. */ + ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT); +} + +static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp) +{ + mbcp->out_count = 3; + + if (ql_get_mb_sts(qdev, mbcp)) { + QPRINTK(qdev, DRV, ERR, "Firmware did not initialize!\n"); + goto exit; + } + + if (netif_carrier_ok(qdev->ndev)) { + QPRINTK(qdev, LINK, INFO, "Link is Down.\n"); + netif_carrier_off(qdev->ndev); + netif_stop_queue(qdev->ndev); + } + QPRINTK(qdev, DRV, ERR, "Link Down.\n"); + QPRINTK(qdev, DRV, ERR, "Link Status = 0x%.08x.\n", mbcp->mbox_out[1]); +exit: + /* Clear the MPI firmware status. */ + ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT); +} + +static void ql_init_fw_done(struct ql_adapter *qdev, struct mbox_params *mbcp) +{ + mbcp->out_count = 2; + + if (ql_get_mb_sts(qdev, mbcp)) { + QPRINTK(qdev, DRV, ERR, "Firmware did not initialize!\n"); + goto exit; + } + QPRINTK(qdev, DRV, ERR, "Firmware initialized!\n"); + QPRINTK(qdev, DRV, ERR, "Firmware status = 0x%.08x.\n", + mbcp->mbox_out[0]); + QPRINTK(qdev, DRV, ERR, "Firmware Revision = 0x%.08x.\n", + mbcp->mbox_out[1]); +exit: + /* Clear the MPI firmware status. */ + ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT); +} + +void ql_mpi_work(struct work_struct *work) +{ + struct ql_adapter *qdev = + container_of(work, struct ql_adapter, mpi_work.work); + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + mbcp->out_count = 1; + + while (ql_read32(qdev, STS) & STS_PI) { + if (ql_get_mb_sts(qdev, mbcp)) { + QPRINTK(qdev, DRV, ERR, + "Could not read MPI, resetting ASIC!\n"); + ql_queue_asic_error(qdev); + } + + switch (mbcp->mbox_out[0]) { + case AEN_LINK_UP: + ql_link_up(qdev, mbcp); + break; + case AEN_LINK_DOWN: + ql_link_down(qdev, mbcp); + break; + case AEN_FW_INIT_DONE: + ql_init_fw_done(qdev, mbcp); + break; + case MB_CMD_STS_GOOD: + break; + case AEN_FW_INIT_FAIL: + case AEN_SYS_ERR: + case MB_CMD_STS_ERR: + ql_queue_fw_error(qdev); + default: + /* Clear the MPI firmware status. */ + ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT); + break; + } + } + ql_enable_completion_interrupt(qdev, 0); +} + +void ql_mpi_reset_work(struct work_struct *work) +{ + struct ql_adapter *qdev = + container_of(work, struct ql_adapter, mpi_reset_work.work); + QPRINTK(qdev, DRV, ERR, + "Enter, qdev = %p..\n", qdev); + ql_write32(qdev, CSR, CSR_CMD_SET_RST); + msleep(50); + ql_write32(qdev, CSR, CSR_CMD_CLR_RST); +} -- cgit v1.2.3-70-g09d2 From 2842e5bf3115193f05dc9dac20f940e7abf44c1a Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 18 Sep 2008 15:23:43 +0200 Subject: x86: move GART TLB flushing options to generic code The GART currently implements the iommu=[no]fullflush command line parameters which influence its IO/TLB flushing strategy. This patch makes these parameters generic so that they can be used by the AMD IOMMU too. Signed-off-by: Joerg Roedel Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 4 ++++ Documentation/x86/x86_64/boot-options.txt | 2 -- arch/x86/kernel/pci-dma.c | 13 +++++++++++++ arch/x86/kernel/pci-gart_64.c | 13 ------------- include/asm-x86/iommu.h | 1 + 5 files changed, 18 insertions(+), 15 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1150444a21a..40066ceb48f 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -893,6 +893,10 @@ and is between 256 and 4096 characters. It is defined in the file nomerge forcesac soft + fullflush + Flush IO/TLB at every deallocation + nofullflush + Flush IO/TLB only when addresses are reused (default) intel_iommu= [DMAR] Intel IOMMU driver (DMAR) option diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index b0c7b6c4abd..c83c8e4bc8e 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -233,8 +233,6 @@ IOMMU (input/output memory management unit) iommu options only relevant to the AMD GART hardware IOMMU: Set the size of the remapping area in bytes. allowed Overwrite iommu off workarounds for specific chipsets. - fullflush Flush IOMMU on each allocation (default). - nofullflush Don't use IOMMU fullflush. leak Turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on). Default number of leak pages is 20. diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 0a1408abcc6..d2f2c0158dc 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -16,6 +16,15 @@ EXPORT_SYMBOL(dma_ops); static int iommu_sac_force __read_mostly; +/* + * If this is disabled the IOMMU will use an optimized flushing strategy + * of only flushing when an mapping is reused. With it true the GART is + * flushed for every mapping. Problem is that doing the lazy flush seems + * to trigger bugs with some popular PCI cards, in particular 3ware (but + * has been also also seen with Qlogic at least). + */ +int iommu_fullflush; + #ifdef CONFIG_IOMMU_DEBUG int panic_on_overflow __read_mostly = 1; int force_iommu __read_mostly = 1; @@ -171,6 +180,10 @@ static __init int iommu_setup(char *p) } if (!strncmp(p, "nomerge", 7)) iommu_merge = 0; + if (!strncmp(p, "fullflush", 8)) + iommu_fullflush = 1; + if (!strncmp(p, "nofullflush", 11)) + iommu_fullflush = 0; if (!strncmp(p, "forcesac", 8)) iommu_sac_force = 1; if (!strncmp(p, "allowdac", 8)) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index 9739d568209..508ef470b27 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -45,15 +45,6 @@ static unsigned long iommu_pages; /* .. and in pages */ static u32 *iommu_gatt_base; /* Remapping table */ -/* - * If this is disabled the IOMMU will use an optimized flushing strategy - * of only flushing when an mapping is reused. With it true the GART is - * flushed for every mapping. Problem is that doing the lazy flush seems - * to trigger bugs with some popular PCI cards, in particular 3ware (but - * has been also also seen with Qlogic at least). - */ -int iommu_fullflush = 1; - /* Allocation bitmap for the remapping area: */ static DEFINE_SPINLOCK(iommu_bitmap_lock); /* Guarded by iommu_bitmap_lock: */ @@ -901,10 +892,6 @@ void __init gart_parse_options(char *p) #endif if (isdigit(*p) && get_option(&p, &arg)) iommu_size = arg; - if (!strncmp(p, "fullflush", 8)) - iommu_fullflush = 1; - if (!strncmp(p, "nofullflush", 11)) - iommu_fullflush = 0; if (!strncmp(p, "noagp", 5)) no_agp = 1; if (!strncmp(p, "noaperture", 10)) diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h index 621a1af94c4..67b2fd56c6d 100644 --- a/include/asm-x86/iommu.h +++ b/include/asm-x86/iommu.h @@ -7,6 +7,7 @@ extern struct dma_mapping_ops nommu_dma_ops; extern int force_iommu, no_iommu; extern int iommu_detected; extern int dmar_disabled; +extern int iommu_fullflush; extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len); -- cgit v1.2.3-70-g09d2 From 7407a2e4b9e1fb3528bb355a571ee3eb7e32c386 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 22 Sep 2008 09:12:11 +0200 Subject: ALSA: virtuoso: add Xonar HDAV1.3 support Add support for the Asus Xonar HDAV1.3 and the Xonar HDAV1.3 Deluxe. Signed-off-by: Clemens Ladisch --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 +- sound/pci/Kconfig | 3 +- sound/pci/oxygen/virtuoso.c | 251 ++++++++++++++++++++++++ 3 files changed, 254 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 30499cf77d5..e0e54a27fc1 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -2120,7 +2120,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ------------------- Module for sound cards based on the Asus AV100/AV200 chips, - i.e., Xonar D1, DX, D2 and D2X. + i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe). This module supports autoprobe and multiple cards. diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 4a7ebbc9676..1f8b7966a83 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -857,7 +857,8 @@ config SND_VIRTUOSO select SND_OXYGEN_LIB help Say Y here to include support for sound cards based on the - Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X. + Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X and + HDAV1.3 (Deluxe). To compile this driver as a module, choose M here: the module will be called snd-virtuoso. diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index 928283de6f3..98c6a8c65d8 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -62,14 +62,66 @@ * AD0 <- 0 */ +/* + * Xonar HDAV1.3 (Deluxe) + * ---------------------- + * + * CMI8788: + * + * I²C <-> PCM1796 (front) + * + * GPI 0 <- external power present + * + * GPIO 0 -> enable output to speakers + * GPIO 2 -> M0 of CS5381 + * GPIO 3 -> M1 of CS5381 + * GPIO 8 -> route input jack to line-in (0) or mic-in (1) + * + * TXD -> HDMI controller + * RXD <- HDMI controller + * + * PCM1796 front: AD1,0 <- 0,0 + * + * no daughterboard + * ---------------- + * + * GPIO 4 <- 1 + * + * H6 daughterboard + * ---------------- + * + * GPIO 4 <- 0 + * GPIO 5 <- 0 + * + * I²C <-> PCM1796 (surround) + * <-> PCM1796 (center/LFE) + * <-> PCM1796 (back) + * + * PCM1796 surround: AD1,0 <- 0,1 + * PCM1796 center/LFE: AD1,0 <- 1,0 + * PCM1796 back: AD1,0 <- 1,1 + * + * unknown daughterboard + * --------------------- + * + * GPIO 4 <- 0 + * GPIO 5 <- 1 + * + * I²C <-> CS4362A (surround, center/LFE, back) + * + * CS4362A: AD0 <- 0 + */ + #include #include #include #include +#include #include #include #include #include +#include #include #include "oxygen.h" #include "cm9780.h" @@ -98,12 +150,15 @@ enum { MODEL_D2X, MODEL_D1, MODEL_DX, + MODEL_HDAV, /* without daughterboard */ + MODEL_HDAV_H6, /* with H6 daughterboard */ }; static struct pci_device_id xonar_ids[] __devinitdata = { { OXYGEN_PCI_SUBID(0x1043, 0x8269), .driver_data = MODEL_D2 }, { OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX }, { OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X }, + { OXYGEN_PCI_SUBID(0x1043, 0x8314), .driver_data = MODEL_HDAV }, { OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 }, { } }; @@ -124,6 +179,10 @@ MODULE_DEVICE_TABLE(pci, xonar_ids); #define GPIO_DX_FRONT_PANEL 0x0002 #define GPIO_DX_INPUT_ROUTE 0x0100 +#define GPIO_HDAV_DB_MASK 0x0030 +#define GPIO_HDAV_DB_H6 0x0000 +#define GPIO_HDAV_DB_XX 0x0020 + #define I2C_DEVICE_PCM1796(i) (0x98 + ((i) << 1)) /* 10011, ADx=i, /W=0 */ #define I2C_DEVICE_CS4398 0x9e /* 10011, AD1=1, AD0=1, /W=0 */ #define I2C_DEVICE_CS4362A 0x30 /* 001100, AD0=0, /W=0 */ @@ -140,6 +199,7 @@ struct xonar_data { u8 pcm1796_oversampling; u8 cs4398_fm; u8 cs4362a_fm; + u8 hdmi_params[5]; }; static void xonar_gpio_changed(struct oxygen *chip); @@ -185,6 +245,24 @@ static void cs4362a_write(struct oxygen *chip, u8 reg, u8 value) oxygen_write_i2c(chip, I2C_DEVICE_CS4362A, reg, value); } +static void hdmi_write_command(struct oxygen *chip, u8 command, + unsigned int count, const u8 *params) +{ + unsigned int i; + u8 checksum; + + oxygen_write_uart(chip, 0xfb); + oxygen_write_uart(chip, 0xef); + oxygen_write_uart(chip, command); + oxygen_write_uart(chip, count); + for (i = 0; i < count; ++i) + oxygen_write_uart(chip, params[i]); + checksum = 0xfb + 0xef + command + count; + for (i = 0; i < count; ++i) + checksum += params[i]; + oxygen_write_uart(chip, checksum); +} + static void xonar_enable_output(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -369,6 +447,43 @@ static void xonar_d1_init(struct oxygen *chip) snd_component_add(chip->card, "CS5361"); } +static void xonar_hdav_init(struct oxygen *chip) +{ + struct xonar_data *data = chip->model_data; + u8 param; + + oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS, + OXYGEN_2WIRE_LENGTH_8 | + OXYGEN_2WIRE_INTERRUPT_MASK | + OXYGEN_2WIRE_SPEED_FAST); + + data->anti_pop_delay = 100; + data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE; + data->ext_power_reg = OXYGEN_GPI_DATA; + data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; + data->ext_power_bit = GPI_DX_EXT_POWER; + data->pcm1796_oversampling = PCM1796_OS_64; + + pcm1796_init(chip); + + oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DX_INPUT_ROUTE); + oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, GPIO_DX_INPUT_ROUTE); + + oxygen_reset_uart(chip); + param = 0; + hdmi_write_command(chip, 0x61, 1, ¶m); + param = 1; + hdmi_write_command(chip, 0x74, 1, ¶m); + data->hdmi_params[1] = IEC958_AES3_CON_FS_48000; + data->hdmi_params[4] = 1; + hdmi_write_command(chip, 0x54, 5, data->hdmi_params); + + xonar_common_init(chip); + + snd_component_add(chip->card, "PCM1796"); + snd_component_add(chip->card, "CS5381"); +} + static void xonar_disable_output(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -388,6 +503,14 @@ static void xonar_d1_cleanup(struct oxygen *chip) oxygen_clear_bits8(chip, OXYGEN_FUNCTION, OXYGEN_FUNCTION_RESET_CODEC); } +static void xonar_hdav_cleanup(struct oxygen *chip) +{ + u8 param = 0; + + hdmi_write_command(chip, 0x74, 1, ¶m); + xonar_disable_output(chip); +} + static void xonar_d2_suspend(struct oxygen *chip) { xonar_d2_cleanup(chip); @@ -398,6 +521,12 @@ static void xonar_d1_suspend(struct oxygen *chip) xonar_d1_cleanup(chip); } +static void xonar_hdav_suspend(struct oxygen *chip) +{ + xonar_hdav_cleanup(chip); + msleep(2); +} + static void xonar_d2_resume(struct oxygen *chip) { pcm1796_init(chip); @@ -410,6 +539,33 @@ static void xonar_d1_resume(struct oxygen *chip) xonar_enable_output(chip); } +static void xonar_hdav_resume(struct oxygen *chip) +{ + struct xonar_data *data = chip->model_data; + u8 param; + + oxygen_reset_uart(chip); + param = 0; + hdmi_write_command(chip, 0x61, 1, ¶m); + param = 1; + hdmi_write_command(chip, 0x74, 1, ¶m); + hdmi_write_command(chip, 0x54, 5, data->hdmi_params); + pcm1796_init(chip); + xonar_enable_output(chip); +} + +static void xonar_hdav_pcm_hardware_filter(unsigned int channel, + struct snd_pcm_hardware *hardware) +{ + if (channel == PCM_MULTICH) { + hardware->rates = SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000; + hardware->rate_min = 44100; + } +} + static void set_pcm1796_params(struct oxygen *chip, struct snd_pcm_hw_params *params) { @@ -460,6 +616,42 @@ static void set_cs43xx_params(struct oxygen *chip, cs4362a_write(chip, 0x0c, data->cs4362a_fm); } +static void set_hdmi_params(struct oxygen *chip, + struct snd_pcm_hw_params *params) +{ + struct xonar_data *data = chip->model_data; + + data->hdmi_params[0] = 0; /* 1 = non-audio */ + switch (params_rate(params)) { + case 44100: + data->hdmi_params[1] = IEC958_AES3_CON_FS_44100; + break; + case 48000: + data->hdmi_params[1] = IEC958_AES3_CON_FS_48000; + break; + default: /* 96000 */ + data->hdmi_params[1] = IEC958_AES3_CON_FS_96000; + break; + case 192000: + data->hdmi_params[1] = IEC958_AES3_CON_FS_192000; + break; + } + data->hdmi_params[2] = params_channels(params) / 2 - 1; + if (params_format(params) == SNDRV_PCM_FORMAT_S16_LE) + data->hdmi_params[3] = 0; + else + data->hdmi_params[3] = 0xc0; + data->hdmi_params[4] = 1; /* ? */ + hdmi_write_command(chip, 0x54, 5, data->hdmi_params); +} + +static void set_hdav_params(struct oxygen *chip, + struct snd_pcm_hw_params *params) +{ + set_pcm1796_params(chip, params); + set_hdmi_params(chip, params); +} + static void xonar_gpio_changed(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -479,6 +671,18 @@ static void xonar_gpio_changed(struct oxygen *chip) } } +static void xonar_hdav_uart_input(struct oxygen *chip) +{ + if (chip->uart_input_count >= 2 && + chip->uart_input[chip->uart_input_count - 2] == 'O' && + chip->uart_input[chip->uart_input_count - 1] == 'K') { + printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:"); + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, + chip->uart_input, chip->uart_input_count); + chip->uart_input_count = 0; + } +} + static int gpio_bit_switch_get(struct snd_kcontrol *ctl, struct snd_ctl_elem_value *value) { @@ -576,16 +780,33 @@ static int xonar_model_probe(struct oxygen *chip, unsigned long driver_data) [MODEL_DX] = "Xonar DX", [MODEL_D2] = "Xonar D2", [MODEL_D2X] = "Xonar D2X", + [MODEL_HDAV] = "Xonar HDAV1.3", + [MODEL_HDAV_H6] = "Xonar HDAV1.3+H6", }; static const u8 dacs[] = { [MODEL_D1] = 2, [MODEL_DX] = 2, [MODEL_D2] = 4, [MODEL_D2X] = 4, + [MODEL_HDAV] = 1, + [MODEL_HDAV_H6] = 4, }; struct xonar_data *data = chip->model_data; data->model = driver_data; + if (data->model == MODEL_HDAV) { + oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, + GPIO_HDAV_DB_MASK); + switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & + GPIO_HDAV_DB_MASK) { + case GPIO_HDAV_DB_H6: + data->model = MODEL_HDAV_H6; + break; + case GPIO_HDAV_DB_XX: + snd_printk(KERN_ERR "unknown daughterboard\n"); + return -ENODEV; + } + } data->dacs = dacs[data->model]; chip->model.shortname = names[data->model]; @@ -654,6 +875,35 @@ static const struct oxygen_model model_xonar_d1 = { .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, }; +static const struct oxygen_model model_xonar_hdav = { + .longname = "Asus Virtuoso 200", + .chip = "AV200", + .owner = THIS_MODULE, + .probe = xonar_model_probe, + .init = xonar_hdav_init, + .cleanup = xonar_hdav_cleanup, + .suspend = xonar_hdav_suspend, + .resume = xonar_hdav_resume, + .pcm_hardware_filter = xonar_hdav_pcm_hardware_filter, + .set_dac_params = set_hdav_params, + .set_adc_params = set_cs53x1_params, + .update_dac_volume = update_pcm1796_volume, + .update_dac_mute = update_pcm1796_mute, + .uart_input = xonar_hdav_uart_input, + .ac97_switch = xonar_line_mic_ac97_switch, + .dac_tlv = pcm1796_db_scale, + .model_data_size = sizeof(struct xonar_data), + .device_config = PLAYBACK_0_TO_I2S | + PLAYBACK_1_TO_SPDIF | + CAPTURE_0_FROM_I2S_2, + .dac_channels = 8, + .dac_volume_min = 0x0f, + .dac_volume_max = 0xff, + .function_flags = OXYGEN_FUNCTION_2WIRE, + .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST, + .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, +}; + static int __devinit xonar_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) { @@ -662,6 +912,7 @@ static int __devinit xonar_probe(struct pci_dev *pci, [MODEL_DX] = &model_xonar_d1, [MODEL_D2] = &model_xonar_d2, [MODEL_D2X] = &model_xonar_d2, + [MODEL_HDAV] = &model_xonar_hdav, }; static int dev; int err; -- cgit v1.2.3-70-g09d2 From afa9fdc2f5f8e4d98f3e77bfa204412cbc181346 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sat, 20 Sep 2008 01:23:30 +0900 Subject: iommu: remove fullflush and nofullflush in IOMMU generic option This patch against tip/x86/iommu virtually reverts 2842e5bf3115193f05dc9dac20f940e7abf44c1a. But just reverting the commit breaks AMD IOMMU so this patch also includes some fixes. The above commit adds new two options to x86 IOMMU generic kernel boot options, fullflush and nofullflush. But such change that affects all the IOMMUs needs more discussion (all IOMMU parties need the chance to discuss it): http://lkml.org/lkml/2008/9/19/106 Signed-off-by: FUJITA Tomonori Acked-by: Joerg Roedel Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 9 +++++---- Documentation/x86/x86_64/boot-options.txt | 2 ++ arch/x86/kernel/amd_iommu.c | 4 ++-- arch/x86/kernel/amd_iommu_init.c | 5 ++++- arch/x86/kernel/pci-dma.c | 13 ------------- arch/x86/kernel/pci-gart_64.c | 13 +++++++++++++ include/asm-x86/amd_iommu_types.h | 6 ++++++ include/asm-x86/iommu.h | 1 - 8 files changed, 32 insertions(+), 21 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 40066ceb48f..040ce30632b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -284,6 +284,11 @@ and is between 256 and 4096 characters. It is defined in the file isolate - enable device isolation (each device, as far as possible, will get its own protection domain) + fullflush - enable flushing of IO/TLB entries when + they are unmapped. Otherwise they are + flushed before they will be reused, which + is a lot of faster + amd_iommu_size= [HW,X86-64] Define the size of the aperture for the AMD IOMMU driver. Possible values are: @@ -893,10 +898,6 @@ and is between 256 and 4096 characters. It is defined in the file nomerge forcesac soft - fullflush - Flush IO/TLB at every deallocation - nofullflush - Flush IO/TLB only when addresses are reused (default) intel_iommu= [DMAR] Intel IOMMU driver (DMAR) option diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index c83c8e4bc8e..b0c7b6c4abd 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -233,6 +233,8 @@ IOMMU (input/output memory management unit) iommu options only relevant to the AMD GART hardware IOMMU: Set the size of the remapping area in bytes. allowed Overwrite iommu off workarounds for specific chipsets. + fullflush Flush IOMMU on each allocation (default). + nofullflush Don't use IOMMU fullflush. leak Turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on). Default number of leak pages is 20. diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 70537d117a9..c19212191c9 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -948,7 +948,7 @@ static dma_addr_t __map_single(struct device *dev, } address += offset; - if (unlikely(dma_dom->need_flush && !iommu_fullflush)) { + if (unlikely(dma_dom->need_flush && !amd_iommu_unmap_flush)) { iommu_flush_tlb(iommu, dma_dom->domain.id); dma_dom->need_flush = false; } else if (unlikely(iommu_has_npcache(iommu))) @@ -985,7 +985,7 @@ static void __unmap_single(struct amd_iommu *iommu, dma_ops_free_addresses(dma_dom, dma_addr, pages); - if (iommu_fullflush) + if (amd_iommu_unmap_flush) iommu_flush_pages(iommu, dma_dom->domain.id, dma_addr, size); } diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index db0c83af44d..148fcfe22f1 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -122,6 +122,7 @@ LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings we find in ACPI */ unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */ int amd_iommu_isolate; /* if 1, device isolation is enabled */ +bool amd_iommu_unmap_flush; /* if true, flush on every unmap */ LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the system */ @@ -1144,7 +1145,7 @@ int __init amd_iommu_init(void) else printk("disabled\n"); - if (iommu_fullflush) + if (amd_iommu_unmap_flush) printk(KERN_INFO "AMD IOMMU: IO/TLB flush on unmap enabled\n"); else printk(KERN_INFO "AMD IOMMU: Lazy IO/TLB flushing enabled\n"); @@ -1214,6 +1215,8 @@ static int __init parse_amd_iommu_options(char *str) for (; *str; ++str) { if (strncmp(str, "isolate", 7) == 0) amd_iommu_isolate = 1; + if (strncmp(str, "fullflush", 11) == 0) + amd_iommu_unmap_flush = true; } return 1; diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index d2f2c0158dc..0a1408abcc6 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -16,15 +16,6 @@ EXPORT_SYMBOL(dma_ops); static int iommu_sac_force __read_mostly; -/* - * If this is disabled the IOMMU will use an optimized flushing strategy - * of only flushing when an mapping is reused. With it true the GART is - * flushed for every mapping. Problem is that doing the lazy flush seems - * to trigger bugs with some popular PCI cards, in particular 3ware (but - * has been also also seen with Qlogic at least). - */ -int iommu_fullflush; - #ifdef CONFIG_IOMMU_DEBUG int panic_on_overflow __read_mostly = 1; int force_iommu __read_mostly = 1; @@ -180,10 +171,6 @@ static __init int iommu_setup(char *p) } if (!strncmp(p, "nomerge", 7)) iommu_merge = 0; - if (!strncmp(p, "fullflush", 8)) - iommu_fullflush = 1; - if (!strncmp(p, "nofullflush", 11)) - iommu_fullflush = 0; if (!strncmp(p, "forcesac", 8)) iommu_sac_force = 1; if (!strncmp(p, "allowdac", 8)) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index 3dcb1ad86e3..9e390f1bd46 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -45,6 +45,15 @@ static unsigned long iommu_pages; /* .. and in pages */ static u32 *iommu_gatt_base; /* Remapping table */ +/* + * If this is disabled the IOMMU will use an optimized flushing strategy + * of only flushing when an mapping is reused. With it true the GART is + * flushed for every mapping. Problem is that doing the lazy flush seems + * to trigger bugs with some popular PCI cards, in particular 3ware (but + * has been also also seen with Qlogic at least). + */ +int iommu_fullflush = 1; + /* Allocation bitmap for the remapping area: */ static DEFINE_SPINLOCK(iommu_bitmap_lock); /* Guarded by iommu_bitmap_lock: */ @@ -892,6 +901,10 @@ void __init gart_parse_options(char *p) #endif if (isdigit(*p) && get_option(&p, &arg)) iommu_size = arg; + if (!strncmp(p, "fullflush", 8)) + iommu_fullflush = 1; + if (!strncmp(p, "nofullflush", 11)) + iommu_fullflush = 0; if (!strncmp(p, "noagp", 5)) no_agp = 1; if (!strncmp(p, "noaperture", 10)) diff --git a/include/asm-x86/amd_iommu_types.h b/include/asm-x86/amd_iommu_types.h index f953309a636..4ff892f3b0a 100644 --- a/include/asm-x86/amd_iommu_types.h +++ b/include/asm-x86/amd_iommu_types.h @@ -376,6 +376,12 @@ extern unsigned long *amd_iommu_pd_alloc_bitmap; /* will be 1 if device isolation is enabled */ extern int amd_iommu_isolate; +/* + * If true, the addresses will be flushed on unmap time, not when + * they are reused + */ +extern bool amd_iommu_unmap_flush; + /* takes a PCI device id and prints it out in a readable form */ static inline void print_devid(u16 devid, int nl) { diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h index 67b2fd56c6d..621a1af94c4 100644 --- a/include/asm-x86/iommu.h +++ b/include/asm-x86/iommu.h @@ -7,7 +7,6 @@ extern struct dma_mapping_ops nommu_dma_ops; extern int force_iommu, no_iommu; extern int iommu_detected; extern int dmar_disabled; -extern int iommu_fullflush; extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len); -- cgit v1.2.3-70-g09d2 From 953f551756a1275d9bfdbb70697323449305161a Mon Sep 17 00:00:00 2001 From: Remi Denis-Courmont Date: Mon, 22 Sep 2008 20:09:46 -0700 Subject: Phonet: kernel documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- Documentation/networking/phonet.txt | 111 ++++++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 Documentation/networking/phonet.txt (limited to 'Documentation') diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt new file mode 100644 index 00000000000..f3c72e0ca8d --- /dev/null +++ b/Documentation/networking/phonet.txt @@ -0,0 +1,111 @@ +Linux Phonet protocol family +============================ + +Introduction +------------ + +Phonet is a packet protocol used by Nokia cellular modems for both IPC +and RPC. With the Linux Phonet socket family, Linux host processes can +receive and send messages from/to the modem, or any other external +device attached to the modem. The modem takes care of routing. + +Phonet packets can be exchanged through various hardware connections +depending on the device, such as: + - USB with the CDC Phonet interface, + - infrared, + - Bluetooth, + - an RS232 serial port (with a dedicated "FBUS" line discipline), + - the SSI bus with some TI OMAP processors. + + +Packets format +-------------- + +Phonet packet have a common header as follow: + + struct phonethdr { + uint8_t pn_media; /* Media type (link-layer identifier) */ + uint8_t pn_rdev; /* Receiver device ID */ + uint8_t pn_sdev; /* Sender device ID */ + uint8_t pn_res; /* Resource ID or function */ + uint16_t pn_length; /* Big-endian message byte length (minus 6) */ + uint8_t pn_robj; /* Receiver object ID */ + uint8_t pn_sobj; /* Sender object ID */ + }; + +The device ID is split: the 6 higher order bits consitutes the device +address, while the 2 lower order bits are used for multiplexing, as are +the 8-bits object identifiers. As such, Phonet can be considered as a +network layer with 6 bits of address space and 10 bits for transport +protocol (much like port numbers in IP world). + +The modem always has address number zero. Each other device has a its +own 6-bits address. + + +Link layer +---------- + +Phonet links are always point-to-point links. The link layer header +consists of a single Phonet media type byte. It uniquely identifies the +link through which the packet is transmitted, from the modem's +perspective. + +Linux Phonet network interfaces use a dedicated link layer type +(ETH_P_PHONET) which is out of the Ethernet type range. They can only +send and receive Phonet packets. + +Note that Phonet interfaces are not allowed to re-order packets, so +only the (default) Linux FIFO qdisc should be used with them. + + +Network layer +------------- + +The Phonet socket address family maps the Phonet packet header: + + struct sockaddr_pn { + sa_family_t spn_family; /* AF_PHONET */ + uint8_t spn_obj; /* Object ID */ + uint8_t spn_dev; /* Device ID */ + uint8_t spn_resource; /* Resource or function */ + uint8_t spn_zero[...]; /* Padding */ + }; + +The resource field is only used when sending and receiving; +It is ignored by bind() and getsockname(). + + +Low-level datagram protocol +--------------------------- + +Applications can send Phonet messages using the Phonet datagram socket +protocol from the PF_PHONET family. Each socket is bound to one of the +2^10 object IDs available, and can send and receive packets with any +other peer. + + struct sockaddr_pn addr = { .spn_family = AF_PHONET, }; + ssize_t len; + socklen_t addrlen = sizeof(addr); + int fd; + + fd = socket(PF_PHONET, SOCK_DGRAM, 0); + bind(fd, (struct sockaddr *)&addr, sizeof(addr)); + /* ... */ + + sendto(fd, msg, msglen, 0, (struct sockaddr *)&addr, sizeof(addr)); + len = recvfrom(fd, buf, sizeof(buf), 0, + (struct sockaddr *)&addr, &addrlen); + +This protocol follows the SOCK_DGRAM connection-less semantics. +However, connect() and getpeername() are not supported, as they did +not seem useful with Phonet usages (could be added easily). + + +Authors +------- + +Linux Phonet was initially written by Sakari Ailus. +Other contributors include Mikä Liljeberg, Andras Domokos, +Carlos Chinea and Rémi Denis-Courmont. +Copyright (C) 2008 Nokia Corporation. -- cgit v1.2.3-70-g09d2 From 1a73ef6ac3f4b44abc9d1875eb9240d7524a7cf7 Mon Sep 17 00:00:00 2001 From: Martin Steigerwald Date: Tue, 23 Sep 2008 13:48:44 +0200 Subject: CFS scheduler: documentation about scheduling policies The documentation about the CFS scheduler is scarse when it comes to scheduling policies. This patch adds a chapter about the scheduling policies it supports. Peter Zijlstra provided most of the information for it in http://marc.info/?l=linux-kernel&m=122210038326356&w=2 Signed-off-by: Martin Steigerwald Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- Documentation/scheduler/sched-design-CFS.txt | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt index b2aa856339a..9d8eb553884 100644 --- a/Documentation/scheduler/sched-design-CFS.txt +++ b/Documentation/scheduler/sched-design-CFS.txt @@ -114,7 +114,31 @@ result. -5. SCHEDULING CLASSES +5. Scheduling policies + +CFS implements three scheduling policies: + + - SCHED_NORMAL (traditionally called SCHED_OTHER): The scheduling + policy that is used for regular tasks. + + - SCHED_BATCH: Does not preempt nearly as often as regular tasks + would, thereby allowing tasks to run longer and make better use of + caches but at the cost of interactivity. This is well suited for + batch jobs. + + - SCHED_IDLE: This is even weaker than nice 19, but its not a true + idle timer scheduler in order to avoid to get into priority + inversion problems which would deadlock the machine. + +SCHED_FIFO/_RR are implemented in sched_rt.c and are as specified by +POSIX. + +The command chrt from util-linux-ng 2.13.1.1 can set all of these except +SCHED_IDLE. + + + +6. SCHEDULING CLASSES The new CFS scheduler has been designed in such a way to introduce "Scheduling Classes," an extensible hierarchy of scheduler modules. These modules @@ -179,7 +203,7 @@ This is the (partial) list of the hooks: -6. GROUP SCHEDULER EXTENSIONS TO CFS +7. GROUP SCHEDULER EXTENSIONS TO CFS Normally, the scheduler operates on individual tasks and strives to provide fair CPU time to each task. Sometimes, it may be desirable to group tasks and -- cgit v1.2.3-70-g09d2 From 6675ce13ed783f88ea5d82f0d855462b76ff0dad Mon Sep 17 00:00:00 2001 From: Marin Mitov Date: Mon, 22 Sep 2008 13:57:46 -0700 Subject: Documentation/DMA-mapping.txt: update for pci_dma_mapping_error() changes Make the example code consistent with changed API. Signed-off-by: Marin Mitov Acked-by: FUJITA Tomonori Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/DMA-mapping.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index b463ecd0c7c..c74fec8c235 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -740,7 +740,7 @@ failure can be determined by: dma_addr_t dma_handle; dma_handle = pci_map_single(pdev, addr, size, direction); - if (pci_dma_mapping_error(dma_handle)) { + if (pci_dma_mapping_error(pdev, dma_handle)) { /* * reduce current DMA mapping usage, * delay and try again later or -- cgit v1.2.3-70-g09d2 From b4d19cc84e8e6838f4aa0b26b3afcdc8c7f71505 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 22 Sep 2008 13:57:51 -0700 Subject: Documentation/sysctl/kernel.txt: fix softlockup_thresh description - s/s/seconds/ - s/10 seconds/60 seconds/ - Mention the zero-disables-it feature. Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/sysctl/kernel.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 276a7e63782..e1ff0d920a5 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -351,9 +351,10 @@ kernel. This value defaults to SHMMAX. softlockup_thresh: -This value can be used to lower the softlockup tolerance -threshold. The default threshold is 10s. If a cpu is locked up -for 10s, the kernel complains. Valid values are 1-60s. +This value can be used to lower the softlockup tolerance threshold. The +default threshold is 60 seconds. If a cpu is locked up for 60 seconds, +the kernel complains. Valid values are 1-60 seconds. Setting this +tunable to zero will disable the softlockup detection altogether. ============================================================== -- cgit v1.2.3-70-g09d2 From 1e16dfc1baa745dd89b95f6e33e4142df6218066 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Tue, 23 Sep 2008 17:35:38 +0200 Subject: powerpc: gpio driver for mpc8349/8572/8610 and compatible Structured similar to the existing QE GPIO support. Signed-off-by: Peter Korsgaard Acked-by: Anton Vorontsov Signed-off-by: Kumar Gala --- .../powerpc/dts-bindings/fsl/8xxx_gpio.txt | 40 +++++ arch/powerpc/sysdev/Kconfig | 9 ++ arch/powerpc/sysdev/Makefile | 1 + arch/powerpc/sysdev/mpc8xxx_gpio.c | 171 +++++++++++++++++++++ 4 files changed, 221 insertions(+) create mode 100644 Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt create mode 100644 arch/powerpc/sysdev/mpc8xxx_gpio.c (limited to 'Documentation') diff --git a/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt new file mode 100644 index 00000000000..d015dcec401 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt @@ -0,0 +1,40 @@ +GPIO controllers on MPC8xxx SoCs + +This is for the non-QE/CPM/GUTs GPIO controllers as found on +8349, 8572, 8610 and compatible. + +Every GPIO controller node must have #gpio-cells property defined, +this information will be used to translate gpio-specifiers. + +Required properties: +- compatible : "fsl,-gpio" followed by "fsl,mpc8349-gpio" for + 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). + - interrupts : Interrupt mapping for GPIO IRQ (currently unused). + - interrupt-parent : Phandle for the interrupt controller that + services interrupts for this device. +- gpio-controller : Marks the port as GPIO controller. + +Example of gpio-controller nodes for a MPC8347 SoC: + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + +See booting-without-of.txt for details of how to specify GPIO +information for devices. diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig index 396582835cb..d0e7bb05c3a 100644 --- a/arch/powerpc/sysdev/Kconfig +++ b/arch/powerpc/sysdev/Kconfig @@ -7,6 +7,15 @@ config PPC4xx_PCI_EXPRESS depends on PCI && 4xx default n +config MPC8xxx_GPIO + bool "MPC8xxx GPIO support" + depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Say Y here if you're going to use hardware that connects to the + MPC831x/834x/837x/8572/8610 GPIOs. + config PPC_MSI_BITMAP bool depends on PCI_MSI diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index b6c269eb265..55618ba9eff 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y) obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o +obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o obj-$(CONFIG_RAPIDIO) += fsl_rio.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c new file mode 100644 index 00000000000..103eace3619 --- /dev/null +++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c @@ -0,0 +1,171 @@ +/* + * GPIOs on MPC8349/8572/8610 and compatible + * + * Copyright (C) 2008 Peter Korsgaard + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define MPC8XXX_GPIO_PINS 32 + +#define GPIO_DIR 0x00 +#define GPIO_ODR 0x04 +#define GPIO_DAT 0x08 +#define GPIO_IER 0x0c +#define GPIO_IMR 0x10 +#define GPIO_ICR 0x14 + +struct mpc8xxx_gpio_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* + * shadowed data register to be able to clear/set output pins in + * open drain mode safely + */ + u32 data; +}; + +static inline u32 mpc8xxx_gpio2mask(unsigned int gpio) +{ + return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio); +} + +static inline struct mpc8xxx_gpio_chip * +to_mpc8xxx_gpio_chip(struct of_mm_gpio_chip *mm) +{ + return container_of(mm, struct mpc8xxx_gpio_chip, mm_gc); +} + +static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); + + mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT); +} + +static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); + + return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio); +} + +static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); + struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); + unsigned long flags; + + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + + if (val) + mpc8xxx_gc->data |= mpc8xxx_gpio2mask(gpio); + else + mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio); + + out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data); + + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); +} + +static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); + struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); + unsigned long flags; + + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + + clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio)); + + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + + return 0; +} + +static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); + struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); + unsigned long flags; + + mpc8xxx_gpio_set(gc, gpio, val); + + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + + setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio)); + + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + + return 0; +} + +static void __init mpc8xxx_add_controller(struct device_node *np) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + int ret; + + mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL); + if (!mpc8xxx_gc) { + ret = -ENOMEM; + goto err; + } + + spin_lock_init(&mpc8xxx_gc->lock); + + mm_gc = &mpc8xxx_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = mpc8xxx_gpio_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = MPC8XXX_GPIO_PINS; + gc->direction_input = mpc8xxx_gpio_dir_in; + gc->direction_output = mpc8xxx_gpio_dir_out; + gc->get = mpc8xxx_gpio_get; + gc->set = mpc8xxx_gpio_set; + + ret = of_mm_gpiochip_add(np, mm_gc); + if (ret) + goto err; + + return; + +err: + pr_err("%s: registration failed with status %d\n", + np->full_name, ret); + kfree(mpc8xxx_gc); + + return; +} + +static int __init mpc8xxx_add_gpiochips(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,mpc8349-gpio") + mpc8xxx_add_controller(np); + + for_each_compatible_node(np, NULL, "fsl,mpc8572-gpio") + mpc8xxx_add_controller(np); + + for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio") + mpc8xxx_add_controller(np); + + return 0; +} +arch_initcall(mpc8xxx_add_gpiochips); -- cgit v1.2.3-70-g09d2 From 697e04db5678fadf96d437806b676403ebee806d Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 2 Sep 2008 10:52:08 +0200 Subject: USB: update of Documentation/usb/anchors.txt The extended anchor API is documented Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/anchors.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'Documentation') diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt index 7304bcf5a30..5e6b64c20d2 100644 --- a/Documentation/usb/anchors.txt +++ b/Documentation/usb/anchors.txt @@ -42,9 +42,21 @@ This function kills all URBs associated with an anchor. The URBs are called in the reverse temporal order they were submitted. This way no data can be reordered. +usb_unlink_anchored_urbs() +-------------------------- + +This function unlinks all URBs associated with an anchor. The URBs +are processed in the reverse temporal order they were submitted. +This is similar to usb_kill_anchored_urbs(), but it will not sleep. +Therefore no guarantee is made that the URBs have been unlinked when +the call returns. They may be unlinked later but will be unlinked in +finite time. + usb_wait_anchor_empty_timeout() ------------------------------- This function waits for all URBs associated with an anchor to finish or a timeout, whichever comes first. Its return value will tell you whether the timeout was reached. + + -- cgit v1.2.3-70-g09d2 From e5d2304802a63304a54cff010209c4a717a2509f Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 23 Sep 2008 14:53:14 -0700 Subject: can: Add documentation for virtual CAN driver usage This patch adds a usage documentation for the virtual CAN driver (vcan). Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- Documentation/networking/can.txt | 44 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 40 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 297ba7b1cca..2035bc4932f 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -35,8 +35,9 @@ This file contains 6.1 general settings 6.2 local loopback of sent frames 6.3 CAN controller hardware filters - 6.4 currently supported CAN hardware - 6.5 todo + 6.4 The virtual CAN driver (vcan) + 6.5 currently supported CAN hardware + 6.6 todo 7 Credits @@ -584,7 +585,42 @@ solution for a couple of reasons: @133MHz with four SJA1000 CAN controllers from 2002 under heavy bus load without any problems ... - 6.4 currently supported CAN hardware (September 2007) + 6.4 The virtual CAN driver (vcan) + + Similar to the network loopback devices, vcan offers a virtual local + CAN interface. A full qualified address on CAN consists of + + - a unique CAN Identifier (CAN ID) + - the CAN bus this CAN ID is transmitted on (e.g. can0) + + so in common use cases more than one virtual CAN interface is needed. + + The virtual CAN interfaces allow the transmission and reception of CAN + frames without real CAN controller hardware. Virtual CAN network + devices are usually named 'vcanX', like vcan0 vcan1 vcan2 ... + When compiled as a module the virtual CAN driver module is called vcan.ko + + Since Linux Kernel version 2.6.24 the vcan driver supports the Kernel + netlink interface to create vcan network devices. The creation and + removal of vcan network devices can be managed with the ip(8) tool: + + - Create a virtual CAN network interface: + ip link add type vcan + + - Create a virtual CAN network interface with a specific name 'vcan42': + ip link add dev vcan42 type vcan + + - Remove a (virtual CAN) network interface 'vcan42': + ip link del vcan42 + + The tool 'vcan' from the SocketCAN SVN repository on BerliOS is obsolete. + + Virtual CAN network device creation in older Kernels: + In Linux Kernel versions < 2.6.24 the vcan driver creates 4 vcan + netdevices at module load time by default. This value can be changed + with the module parameter 'numdev'. E.g. 'modprobe vcan numdev=8' + + 6.5 currently supported CAN hardware On the project website http://developer.berlios.de/projects/socketcan there are different drivers available: @@ -603,7 +639,7 @@ solution for a couple of reasons: Please check the Mailing Lists on the berlios OSS project website. - 6.5 todo (September 2007) + 6.6 todo The configuration interface for CAN network drivers is still an open issue that has not been finalized in the socketcan project. Also the -- cgit v1.2.3-70-g09d2 From fec12a62d74dc93a36c9ce1c3bce9ba045e44846 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 19 Sep 2008 02:15:08 +0800 Subject: Documentation: fix the now deprecated reference to {set,reset}_scoop_gpio Due to recent patches removing the now deprecated references to {set,reset}_scoop_gpio() and converting them to the generic GPIO API, the references in the documentation also need to be fixed. Signed-off-by: Eric Miao Cc: Liam Girdwood Signed-off-by: Russell King --- Documentation/sound/alsa/soc/dapm.txt | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt index b2ed6983f40..46f9684d0b2 100644 --- a/Documentation/sound/alsa/soc/dapm.txt +++ b/Documentation/sound/alsa/soc/dapm.txt @@ -135,11 +135,7 @@ when the Mic is inserted:- static int spitz_mic_bias(struct snd_soc_dapm_widget* w, int event) { - if(SND_SOC_DAPM_EVENT_ON(event)) - set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS); - else - reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS); - + gpio_set_value(SPITZ_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event)); return 0; } @@ -269,11 +265,7 @@ powered only when the spk is in use. /* turn speaker amplifier on/off depending on use */ static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event) { - if (SND_SOC_DAPM_EVENT_ON(event)) - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON); - else - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON); - + gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event)); return 0; } -- cgit v1.2.3-70-g09d2 From d0eb40628e29c2bb3b5f8242b1d2f50b1a88d9da Mon Sep 17 00:00:00 2001 From: Márton Németh Date: Sat, 27 Sep 2008 19:32:17 +0200 Subject: cdrom: update ioctl documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Correct copy-paste problem: CDROMCLOSETRAY is about closing the tray, not opening it. Signed-off-by: Márton Németh Signed-off-by: Andrew Morton Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/ioctl/cdrom.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ioctl/cdrom.txt b/Documentation/ioctl/cdrom.txt index 62d4af44ec4..59df81c8da2 100644 --- a/Documentation/ioctl/cdrom.txt +++ b/Documentation/ioctl/cdrom.txt @@ -271,14 +271,14 @@ CDROMCLOSETRAY pendant of CDROMEJECT usage: - ioctl(fd, CDROMEJECT, 0); + ioctl(fd, CDROMCLOSETRAY, 0); inputs: none outputs: none error returns: - ENOSYS cd drive not capable of ejecting + ENOSYS cd drive not capable of closing the tray EBUSY other processes are accessing drive, or door is locked notes: -- cgit v1.2.3-70-g09d2 From 40f17a7981f1d8baf0ad13233e5e7632754d931a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 4 Sep 2008 03:57:01 -0300 Subject: V4L/DVB (8909): gspca: PAC 7302 webcam 093a:262a added. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac7311.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 0f03900c48f..9a3e4d797fa 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -190,6 +190,7 @@ pac7311 093a:260f SnakeCam pac7311 093a:2621 PAC731x pac7311 093a:2624 PAC7302 pac7311 093a:2626 Labtec 2200 +pac7311 093a:262a Webcam 300k zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 vc032x 0ac8:0323 Vimicro Vc0323 diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index d4be5184328..ba865b7f1ed 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -1063,6 +1063,7 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302}, + {USB_DEVICE(0x093a, 0x262a), .driver_info = SENSOR_PAC7302}, {} }; MODULE_DEVICE_TABLE(usb, device_table); -- cgit v1.2.3-70-g09d2 From ac2dc8ca14fb9028b160d89fdef04ecc66add3a2 Mon Sep 17 00:00:00 2001 From: Rémi Denis-Courmont Date: Tue, 30 Sep 2008 02:52:01 -0700 Subject: Phonet: improve documentation Fix grammar errors spotted by Randy Dunlap, and adds some more details. Signed-off-by: Remi Denis-Courmont Signed-off-by: David S. Miller --- Documentation/networking/phonet.txt | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt index f3c72e0ca8d..57d3e59edb1 100644 --- a/Documentation/networking/phonet.txt +++ b/Documentation/networking/phonet.txt @@ -21,7 +21,7 @@ depending on the device, such as: Packets format -------------- -Phonet packet have a common header as follow: +Phonet packets have a common header as follows: struct phonethdr { uint8_t pn_media; /* Media type (link-layer identifier) */ @@ -33,14 +33,17 @@ Phonet packet have a common header as follow: uint8_t pn_sobj; /* Sender object ID */ }; -The device ID is split: the 6 higher order bits consitutes the device -address, while the 2 lower order bits are used for multiplexing, as are -the 8-bits object identifiers. As such, Phonet can be considered as a +On Linux, the link-layer header includes the pn_media byte (see below). +The next 7 bytes are part of the network-layer header. + +The device ID is split: the 6 higher-order bits consitute the device +address, while the 2 lower-order bits are used for multiplexing, as are +the 8-bit object identifiers. As such, Phonet can be considered as a network layer with 6 bits of address space and 10 bits for transport protocol (much like port numbers in IP world). -The modem always has address number zero. Each other device has a its -own 6-bits address. +The modem always has address number zero. All other device have a their +own 6-bit address. Link layer @@ -49,11 +52,18 @@ Link layer Phonet links are always point-to-point links. The link layer header consists of a single Phonet media type byte. It uniquely identifies the link through which the packet is transmitted, from the modem's -perspective. - -Linux Phonet network interfaces use a dedicated link layer type -(ETH_P_PHONET) which is out of the Ethernet type range. They can only -send and receive Phonet packets. +perspective. Each Phonet network device shall prepend and set the media +type byte as appropriate. For convenience, a common phonet_header_ops +link-layer header operations structure is provided. It sets the +media type according to the network device hardware address. + +Linux Phonet network interfaces support a dedicated link layer packets +type (ETH_P_PHONET) which is out of the Ethernet type range. They can +only send and receive Phonet packets. + +The virtual TUN tunnel device driver can also be used for Phonet. This +requires IFF_TUN mode, _without_ the IFF_NO_PI flag. In this case, +there is no link-layer header, so there is no Phonet media type byte. Note that Phonet interfaces are not allowed to re-order packets, so only the (default) Linux FIFO qdisc should be used with them. -- cgit v1.2.3-70-g09d2 From a30c3f69e6336cb9b09a989595e417367e4e9b1b Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 18 Jul 2008 08:32:52 -0700 Subject: [SCSI] fc_transport: Add an API to allow an LLD to create vports There's already a fc_vport_termintate() call exported by the transport. This patch adds a symmetric call to the API to allow an NPIV-capable LLD to instantiate vports sans user intervention. Additional comments/updates: Re: scsi_fc_transport.txt Add a function prototype for fc_vport_terminate similar to what's done for fc_vport_create Re: fc_vport_create I recommend we pass the channel number in fc_vport_create rather than fixing it at zero. Also, ids->vport_type should be set to FC_PORTTYPE_NPIV prior to calling fc_vport_create. The comment is also meaningless. Added-by and Signed-off-by: James Smart Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- Documentation/scsi/scsi_fc_transport.txt | 36 +++++++++++++++++++++ drivers/scsi/scsi_transport_fc.c | 54 +++++++++++++++----------------- include/scsi/scsi_transport_fc.h | 23 +++++++++++++- 3 files changed, 84 insertions(+), 29 deletions(-) (limited to 'Documentation') diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt index 75143f0c23b..38d324d62b2 100644 --- a/Documentation/scsi/scsi_fc_transport.txt +++ b/Documentation/scsi/scsi_fc_transport.txt @@ -436,6 +436,42 @@ Other: was updated to remove all vports for the fc_host as well. +Transport supplied functions +---------------------------- + +The following functions are supplied by the FC-transport for use by LLDs. + + fc_vport_create - create a vport + fc_vport_terminate - detach and remove a vport + +Details: + +/** + * fc_vport_create - Admin App or LLDD requests creation of a vport + * @shost: scsi host the virtual port is connected to. + * @ids: The world wide names, FC4 port roles, etc for + * the virtual port. + * + * Notes: + * This routine assumes no locks are held on entry. + */ +struct fc_vport * +fc_vport_create(struct Scsi_Host *shost, struct fc_vport_identifiers *ids) + +/** + * fc_vport_terminate - Admin App or LLDD requests termination of a vport + * @vport: fc_vport to be terminated + * + * Calls the LLDD vport_delete() function, then deallocates and removes + * the vport from the shost and object tree. + * + * Notes: + * This routine assumes no locks are held on entry. + */ +int +fc_vport_terminate(struct fc_vport *vport) + + Credits ======= The following people have contributed to this document: diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 56823fd1fb8..cb971f0b784 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -40,31 +40,7 @@ static int fc_queue_work(struct Scsi_Host *, struct work_struct *); static void fc_vport_sched_delete(struct work_struct *work); - -/* - * This is a temporary carrier for creating a vport. It will eventually - * be replaced by a real message definition for sgio or netlink. - * - * fc_vport_identifiers: This set of data contains all elements - * to uniquely identify and instantiate a FC virtual port. - * - * Notes: - * symbolic_name: The driver is to append the symbolic_name string data - * to the symbolic_node_name data that it generates by default. - * the resulting combination should then be registered with the switch. - * It is expected that things like Xen may stuff a VM title into - * this field. - */ -struct fc_vport_identifiers { - u64 node_name; - u64 port_name; - u32 roles; - bool disable; - enum fc_port_type vport_type; /* only FC_PORTTYPE_NPIV allowed */ - char symbolic_name[FC_VPORT_SYMBOLIC_NAMELEN]; -}; - -static int fc_vport_create(struct Scsi_Host *shost, int channel, +static int fc_vport_setup(struct Scsi_Host *shost, int channel, struct device *pdev, struct fc_vport_identifiers *ids, struct fc_vport **vport); @@ -1760,7 +1736,7 @@ store_fc_host_vport_create(struct device *dev, struct device_attribute *attr, vid.disable = false; /* always enabled */ /* we only allow support on Channel 0 !!! */ - stat = fc_vport_create(shost, 0, &shost->shost_gendev, &vid, &vport); + stat = fc_vport_setup(shost, 0, &shost->shost_gendev, &vid, &vport); return stat ? stat : count; } static FC_DEVICE_ATTR(host, vport_create, S_IWUSR, NULL, @@ -3103,7 +3079,7 @@ fc_scsi_scan_rport(struct work_struct *work) /** - * fc_vport_create - allocates and creates a FC virtual port. + * fc_vport_setup - allocates and creates a FC virtual port. * @shost: scsi host the virtual port is connected to. * @channel: Channel on shost port connected to. * @pdev: parent device for vport @@ -3118,7 +3094,7 @@ fc_scsi_scan_rport(struct work_struct *work) * This routine assumes no locks are held on entry. */ static int -fc_vport_create(struct Scsi_Host *shost, int channel, struct device *pdev, +fc_vport_setup(struct Scsi_Host *shost, int channel, struct device *pdev, struct fc_vport_identifiers *ids, struct fc_vport **ret_vport) { struct fc_host_attrs *fc_host = shost_to_fc_host(shost); @@ -3231,6 +3207,28 @@ delete_vport: return error; } +/** + * fc_vport_create - Admin App or LLDD requests creation of a vport + * @shost: scsi host the virtual port is connected to. + * @channel: channel on shost port connected to. + * @ids: The world wide names, FC4 port roles, etc for + * the virtual port. + * + * Notes: + * This routine assumes no locks are held on entry. + */ +struct fc_vport * +fc_vport_create(struct Scsi_Host *shost, int channel, + struct fc_vport_identifiers *ids) +{ + int stat; + struct fc_vport *vport; + + stat = fc_vport_setup(shost, channel, &shost->shost_gendev, + ids, &vport); + return stat ? NULL : vport; +} +EXPORT_SYMBOL(fc_vport_create); /** * fc_vport_terminate - Admin App or LLDD requests termination of a vport diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 878373c32ef..21018a4df45 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -167,6 +167,26 @@ enum fc_tgtid_binding_type { struct device_attribute dev_attr_vport_##_name = \ __ATTR(_name,_mode,_show,_store) +/* + * fc_vport_identifiers: This set of data contains all elements + * to uniquely identify and instantiate a FC virtual port. + * + * Notes: + * symbolic_name: The driver is to append the symbolic_name string data + * to the symbolic_node_name data that it generates by default. + * the resulting combination should then be registered with the switch. + * It is expected that things like Xen may stuff a VM title into + * this field. + */ +#define FC_VPORT_SYMBOLIC_NAMELEN 64 +struct fc_vport_identifiers { + u64 node_name; + u64 port_name; + u32 roles; + bool disable; + enum fc_port_type vport_type; /* only FC_PORTTYPE_NPIV allowed */ + char symbolic_name[FC_VPORT_SYMBOLIC_NAMELEN]; +}; /* * FC Virtual Port Attributes @@ -197,7 +217,6 @@ struct device_attribute dev_attr_vport_##_name = \ * managed by the transport w/o driver interaction. */ -#define FC_VPORT_SYMBOLIC_NAMELEN 64 struct fc_vport { /* Fixed Attributes */ @@ -732,6 +751,8 @@ void fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number, * be sure to read the Vendor Type and ID formatting requirements * specified in scsi_netlink.h */ +struct fc_vport *fc_vport_create(struct Scsi_Host *shost, int channel, + struct fc_vport_identifiers *); int fc_vport_terminate(struct fc_vport *vport); #endif /* SCSI_TRANSPORT_FC_H */ -- cgit v1.2.3-70-g09d2 From 37515facd001942221d68171c81c1f46d54ffdd0 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 9 Oct 2008 23:21:54 -0400 Subject: ext4: Improve the documentation for ext4's /proc tunables Signed-off-by: "Theodore Ts'o" Cc: Alex Tomas Cc: Andreas Dilger --- Documentation/filesystems/proc.txt | 70 ++++++++++++++++++-------------------- 1 file changed, 33 insertions(+), 37 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index f566ad9bcb7..d9ac9706735 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -923,45 +923,41 @@ CPUs. The "procs_blocked" line gives the number of processes currently blocked, waiting for I/O to complete. + 1.9 Ext4 file system parameters ------------------------------ -Ext4 file system have one directory per partition under /proc/fs/ext4/ -# ls /proc/fs/ext4/hdc/ -group_prealloc max_to_scan mb_groups mb_history min_to_scan order2_req -stats stream_req - -mb_groups: -This file gives the details of multiblock allocator buddy cache of free blocks - -mb_history: -Multiblock allocation history. - -stats: -This file indicate whether the multiblock allocator should start collecting -statistics. The statistics are shown during unmount - -group_prealloc: -The multiblock allocator normalize the block allocation request to -group_prealloc filesystem blocks if we don't have strip value set. -The stripe value can be specified at mount time or during mke2fs. - -max_to_scan: -How long multiblock allocator can look for a best extent (in found extents) - -min_to_scan: -How long multiblock allocator must look for a best extent - -order2_req: -Multiblock allocator use 2^N search using buddies only for requests greater -than or equal to order2_req. The request size is specfied in file system -blocks. A value of 2 indicate only if the requests are greater than or equal -to 4 blocks. - -stream_req: -Files smaller than stream_req are served by the stream allocator, whose -purpose is to pack requests as close each to other as possible to -produce smooth I/O traffic. Avalue of 16 indicate that file smaller than 16 -filesystem block size will use group based preallocation. + +Information about mounted ext4 file systems can be found in +/proc/fs/ext4. Each mounted filesystem will have a directory in +/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or +/proc/fs/ext4/dm-0). The files in each per-device directory are shown +in Table 1-10, below. + +Table 1-10: Files in /proc/fs/ext4/ +.............................................................................. + File Content + mb_groups details of multiblock allocator buddy cache of free blocks + mb_history multiblock allocation history + stats controls whether the multiblock allocator should start + collecting statistics, which are shown during the unmount + group_prealloc the multiblock allocator will round up allocation + requests to a multiple of this tuning parameter if the + stripe size is not set in the ext4 superblock + max_to_scan The maximum number of extents the multiblock allocator + will search to find the best extent + min_to_scan The minimum number of extents the multiblock allocator + will search to find the best extent + order2_req Tuning parameter which controls the minimum size for + requests (as a power of 2) where the buddy cache is + used + stream_req Files which have fewer blocks than this tunable + parameter will have their blocks allocated out of a + block group specific preallocation pool, so that small + files are packed closely together. Each large file + will have its blocks allocated out of its own unique + preallocation pool. +.............................................................................. + ------------------------------------------------------------------------------ Summary -- cgit v1.2.3-70-g09d2 From 240799cdf22bd789ea6852653c3b879d35ad0a6c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 9 Oct 2008 23:53:47 -0400 Subject: ext4: Use readahead when reading an inode from the inode table With modern hard drives, reading 64k takes roughly the same time as reading a 4k block. So request readahead for adjacent inode table blocks to reduce the time it takes when iterating over directories (especially when doing this in htree sort order) in a cold cache case. With this patch, the time it takes to run "git status" on a kernel tree after flushing the caches via "echo 3 > /proc/sys/vm/drop_caches" is reduced by 21%. Signed-off-by: "Theodore Ts'o" --- Documentation/filesystems/ext4.txt | 6 ++ Documentation/filesystems/proc.txt | 3 + fs/ext4/ext4.h | 2 + fs/ext4/ext4_sb.h | 1 + fs/ext4/inode.c | 134 ++++++++++++++++++------------------- fs/ext4/super.c | 27 +++++++- 6 files changed, 101 insertions(+), 72 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 0d5394920a3..289057958f9 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -177,6 +177,11 @@ barrier=<0|1(*)> This enables/disables the use of write barriers in your disks are battery-backed in one way or another, disabling barriers may safely improve performance. +inode_readahead=n This tuning parameter controls the maximum + number of inode table blocks that ext4's inode + table readahead algorithm will pre-read into + the buffer cache. The default value is 32 blocks. + orlov (*) This enables the new Orlov block allocator. It is enabled by default. @@ -252,6 +257,7 @@ stripe=n Number of filesystem blocks that mballoc will try delalloc (*) Deferring block allocation until write-out time. nodelalloc Disable delayed allocation. Blocks are allocation when data is copied from user to page cache. + Data Mode ========= There are 3 different data modes: diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index d9ac9706735..d831d24d2a6 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -956,6 +956,9 @@ Table 1-10: Files in /proc/fs/ext4/ files are packed closely together. Each large file will have its blocks allocated out of its own unique preallocation pool. +inode_readahead Tuning parameter which controls the maximum number of + inode table blocks that ext4's inode table readahead + algorithm will pre-read into the buffer cache .............................................................................. diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 163c44527dd..922d18720c9 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -790,6 +790,8 @@ static inline int ext4_valid_inum(struct super_block *sb, unsigned long ino) #define EXT4_DEF_RESUID 0 #define EXT4_DEF_RESGID 0 +#define EXT4_DEF_INODE_READAHEAD_BLKS 32 + /* * Default mount options */ diff --git a/fs/ext4/ext4_sb.h b/fs/ext4/ext4_sb.h index f92af01138d..94e0757522a 100644 --- a/fs/ext4/ext4_sb.h +++ b/fs/ext4/ext4_sb.h @@ -52,6 +52,7 @@ struct ext4_sb_info { int s_desc_per_block_bits; int s_inode_size; int s_first_ino; + unsigned int s_inode_readahead_blks; spinlock_t s_next_gen_lock; u32 s_next_generation; u32 s_hash_seed[4]; diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 22fcbb67cd8..ef4ca3d4abc 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3833,41 +3833,6 @@ out_stop: ext4_journal_stop(handle); } -static ext4_fsblk_t ext4_get_inode_block(struct super_block *sb, - unsigned long ino, struct ext4_iloc *iloc) -{ - ext4_group_t block_group; - unsigned long offset; - ext4_fsblk_t block; - struct ext4_group_desc *gdp; - - if (!ext4_valid_inum(sb, ino)) { - /* - * This error is already checked for in namei.c unless we are - * looking at an NFS filehandle, in which case no error - * report is needed - */ - return 0; - } - - block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb); - gdp = ext4_get_group_desc(sb, block_group, NULL); - if (!gdp) - return 0; - - /* - * Figure out the offset within the block group inode table - */ - offset = ((ino - 1) % EXT4_INODES_PER_GROUP(sb)) * - EXT4_INODE_SIZE(sb); - block = ext4_inode_table(sb, gdp) + - (offset >> EXT4_BLOCK_SIZE_BITS(sb)); - - iloc->block_group = block_group; - iloc->offset = offset & (EXT4_BLOCK_SIZE(sb) - 1); - return block; -} - /* * ext4_get_inode_loc returns with an extra refcount against the inode's * underlying buffer_head on success. If 'in_mem' is true, we have all @@ -3877,19 +3842,35 @@ static ext4_fsblk_t ext4_get_inode_block(struct super_block *sb, static int __ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc, int in_mem) { - ext4_fsblk_t block; - struct buffer_head *bh; + struct ext4_group_desc *gdp; + struct buffer_head *bh; + struct super_block *sb = inode->i_sb; + ext4_fsblk_t block; + int inodes_per_block, inode_offset; + + iloc->bh = 0; + if (!ext4_valid_inum(sb, inode->i_ino)) + return -EIO; - block = ext4_get_inode_block(inode->i_sb, inode->i_ino, iloc); - if (!block) + iloc->block_group = (inode->i_ino - 1) / EXT4_INODES_PER_GROUP(sb); + gdp = ext4_get_group_desc(sb, iloc->block_group, NULL); + if (!gdp) return -EIO; - bh = sb_getblk(inode->i_sb, block); + /* + * Figure out the offset within the block group inode table + */ + inodes_per_block = (EXT4_BLOCK_SIZE(sb) / EXT4_INODE_SIZE(sb)); + inode_offset = ((inode->i_ino - 1) % + EXT4_INODES_PER_GROUP(sb)); + block = ext4_inode_table(sb, gdp) + (inode_offset / inodes_per_block); + iloc->offset = (inode_offset % inodes_per_block) * EXT4_INODE_SIZE(sb); + + bh = sb_getblk(sb, block); if (!bh) { - ext4_error (inode->i_sb, "ext4_get_inode_loc", - "unable to read inode block - " - "inode=%lu, block=%llu", - inode->i_ino, block); + ext4_error(sb, "ext4_get_inode_loc", "unable to read " + "inode block - inode=%lu, block=%llu", + inode->i_ino, block); return -EIO; } if (!buffer_uptodate(bh)) { @@ -3917,28 +3898,12 @@ static int __ext4_get_inode_loc(struct inode *inode, */ if (in_mem) { struct buffer_head *bitmap_bh; - struct ext4_group_desc *desc; - int inodes_per_buffer; - int inode_offset, i; - ext4_group_t block_group; - int start; - - block_group = (inode->i_ino - 1) / - EXT4_INODES_PER_GROUP(inode->i_sb); - inodes_per_buffer = bh->b_size / - EXT4_INODE_SIZE(inode->i_sb); - inode_offset = ((inode->i_ino - 1) % - EXT4_INODES_PER_GROUP(inode->i_sb)); - start = inode_offset & ~(inodes_per_buffer - 1); + int i, start; - /* Is the inode bitmap in cache? */ - desc = ext4_get_group_desc(inode->i_sb, - block_group, NULL); - if (!desc) - goto make_io; + start = inode_offset & ~(inodes_per_block - 1); - bitmap_bh = sb_getblk(inode->i_sb, - ext4_inode_bitmap(inode->i_sb, desc)); + /* Is the inode bitmap in cache? */ + bitmap_bh = sb_getblk(sb, ext4_inode_bitmap(sb, gdp)); if (!bitmap_bh) goto make_io; @@ -3951,14 +3916,14 @@ static int __ext4_get_inode_loc(struct inode *inode, brelse(bitmap_bh); goto make_io; } - for (i = start; i < start + inodes_per_buffer; i++) { + for (i = start; i < start + inodes_per_block; i++) { if (i == inode_offset) continue; if (ext4_test_bit(i, bitmap_bh->b_data)) break; } brelse(bitmap_bh); - if (i == start + inodes_per_buffer) { + if (i == start + inodes_per_block) { /* all other inodes are free, so skip I/O */ memset(bh->b_data, 0, bh->b_size); set_buffer_uptodate(bh); @@ -3968,6 +3933,36 @@ static int __ext4_get_inode_loc(struct inode *inode, } make_io: + /* + * If we need to do any I/O, try to pre-readahead extra + * blocks from the inode table. + */ + if (EXT4_SB(sb)->s_inode_readahead_blks) { + ext4_fsblk_t b, end, table; + unsigned num; + + table = ext4_inode_table(sb, gdp); + /* Make sure s_inode_readahead_blks is a power of 2 */ + while (EXT4_SB(sb)->s_inode_readahead_blks & + (EXT4_SB(sb)->s_inode_readahead_blks-1)) + EXT4_SB(sb)->s_inode_readahead_blks = + (EXT4_SB(sb)->s_inode_readahead_blks & + (EXT4_SB(sb)->s_inode_readahead_blks-1)); + b = block & ~(EXT4_SB(sb)->s_inode_readahead_blks-1); + if (table > b) + b = table; + end = b + EXT4_SB(sb)->s_inode_readahead_blks; + num = EXT4_INODES_PER_GROUP(sb); + if (EXT4_HAS_RO_COMPAT_FEATURE(sb, + EXT4_FEATURE_RO_COMPAT_GDT_CSUM)) + num -= le16_to_cpu(gdp->bg_itable_unused); + table += num / inodes_per_block; + if (end > table) + end = table; + while (b <= end) + sb_breadahead(sb, b++); + } + /* * There are other valid inodes in the buffer, this inode * has in-inode xattrs, or we don't have this inode in memory. @@ -3978,10 +3973,9 @@ make_io: submit_bh(READ_META, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) { - ext4_error(inode->i_sb, "ext4_get_inode_loc", - "unable to read inode block - " - "inode=%lu, block=%llu", - inode->i_ino, block); + ext4_error(sb, __func__, + "unable to read inode block - inode=%lu, " + "block=%llu", inode->i_ino, block); brelse(bh); return -EIO; } diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 9f5468fb06d..6583aee5177 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -515,8 +515,10 @@ static void ext4_put_super(struct super_block *sb) mark_buffer_dirty(sbi->s_sbh); ext4_commit_super(sb, es, 1); } - if (sbi->s_proc) + if (sbi->s_proc) { + remove_proc_entry("inode_readahead_blks", sbi->s_proc); remove_proc_entry(sb->s_id, ext4_proc_root); + } for (i = 0; i < sbi->s_gdb_count; i++) brelse(sbi->s_group_desc[i]); @@ -779,6 +781,10 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) else if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA) seq_puts(seq, ",data=writeback"); + if (sbi->s_inode_readahead_blks != EXT4_DEF_INODE_READAHEAD_BLKS) + seq_printf(seq, ",inode_readahead_blks=%u", + sbi->s_inode_readahead_blks); + ext4_show_quota_options(seq, sb); return 0; } @@ -913,6 +919,7 @@ enum { Opt_ignore, Opt_barrier, Opt_err, Opt_resize, Opt_usrquota, Opt_grpquota, Opt_extents, Opt_noextents, Opt_i_version, Opt_mballoc, Opt_nomballoc, Opt_stripe, Opt_delalloc, Opt_nodelalloc, + Opt_inode_readahead_blks }; static match_table_t tokens = { @@ -973,6 +980,7 @@ static match_table_t tokens = { {Opt_resize, "resize"}, {Opt_delalloc, "delalloc"}, {Opt_nodelalloc, "nodelalloc"}, + {Opt_inode_readahead_blks, "inode_readahead_blks=%u"}, {Opt_err, NULL}, }; @@ -1381,6 +1389,13 @@ set_qf_format: case Opt_delalloc: set_opt(sbi->s_mount_opt, DELALLOC); break; + case Opt_inode_readahead_blks: + if (match_int(&args[0], &option)) + return 0; + if (option < 0 || option > (1 << 30)) + return 0; + sbi->s_inode_readahead_blks = option; + break; default: printk(KERN_ERR "EXT4-fs: Unrecognized mount option \"%s\" " @@ -1938,6 +1953,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) sbi->s_mount_opt = 0; sbi->s_resuid = EXT4_DEF_RESUID; sbi->s_resgid = EXT4_DEF_RESGID; + sbi->s_inode_readahead_blks = EXT4_DEF_INODE_READAHEAD_BLKS; sbi->s_sb_block = sb_block; unlock_kernel(); @@ -2234,6 +2250,11 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) if (ext4_proc_root) sbi->s_proc = proc_mkdir(sb->s_id, ext4_proc_root); + if (sbi->s_proc) + proc_create_data("inode_readahead_blks", 0644, sbi->s_proc, + &ext4_ui_proc_fops, + &sbi->s_inode_readahead_blks); + bgl_lock_init(&sbi->s_blockgroup_lock); for (i = 0; i < db_count; i++) { @@ -2513,8 +2534,10 @@ failed_mount2: brelse(sbi->s_group_desc[i]); kfree(sbi->s_group_desc); failed_mount: - if (sbi->s_proc) + if (sbi->s_proc) { + remove_proc_entry("inode_readahead_blks", sbi->s_proc); remove_proc_entry(sb->s_id, ext4_proc_root); + } #ifdef CONFIG_QUOTA for (i = 0; i < MAXQUOTAS; i++) kfree(sbi->s_qf_names[i]); -- cgit v1.2.3-70-g09d2 From c4b929b85bdb64afacbbf6453b1f2bf7e14c9e89 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Wed, 8 Oct 2008 19:44:18 -0400 Subject: vfs: vfs-level fiemap interface Basic vfs-level fiemap infrastructure, which sets up a new ->fiemap inode operation. Userspace can get extent information on a file via fiemap ioctl. As input, the fiemap ioctl takes a struct fiemap which includes an array of struct fiemap_extent (fm_extents). Size of the extent array is passed as fm_extent_count and number of extents returned will be written into fm_mapped_extents. Offset and length fields on the fiemap structure (fm_start, fm_length) describe a logical range which will be searched for extents. All extents returned will at least partially contain this range. The actual extent offsets and ranges returned will be unmodified from their offset and range on-disk. The fiemap ioctl returns '0' on success. On error, -1 is returned and errno is set. If errno is equal to EBADR, then fm_flags will contain those flags which were passed in which the kernel did not understand. On all other errors, the contents of fm_extents is undefined. As fiemap evolved, there have been many authors of the vfs patch. As far as I can tell, the list includes: Kalpak Shah Andreas Dilger Eric Sandeen Mark Fasheh Signed-off-by: Mark Fasheh Signed-off-by: "Theodore Ts'o" Cc: Michael Kerrisk Cc: linux-api@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org --- Documentation/filesystems/fiemap.txt | 228 +++++++++++++++++++++++++++++++++++ fs/ioctl.c | 155 ++++++++++++++++++++++++ include/linux/fiemap.h | 64 ++++++++++ include/linux/fs.h | 18 +++ 4 files changed, 465 insertions(+) create mode 100644 Documentation/filesystems/fiemap.txt create mode 100644 include/linux/fiemap.h (limited to 'Documentation') diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt new file mode 100644 index 00000000000..1e3defcfe50 --- /dev/null +++ b/Documentation/filesystems/fiemap.txt @@ -0,0 +1,228 @@ +============ +Fiemap Ioctl +============ + +The fiemap ioctl is an efficient method for userspace to get file +extent mappings. Instead of block-by-block mapping (such as bmap), fiemap +returns a list of extents. + + +Request Basics +-------------- + +A fiemap request is encoded within struct fiemap: + +struct fiemap { + __u64 fm_start; /* logical offset (inclusive) at + * which to start mapping (in) */ + __u64 fm_length; /* logical length of mapping which + * userspace cares about (in) */ + __u32 fm_flags; /* FIEMAP_FLAG_* flags for request (in/out) */ + __u32 fm_mapped_extents; /* number of extents that were + * mapped (out) */ + __u32 fm_extent_count; /* size of fm_extents array (in) */ + __u32 fm_reserved; + struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */ +}; + + +fm_start, and fm_length specify the logical range within the file +which the process would like mappings for. Extents returned mirror +those on disk - that is, the logical offset of the 1st returned extent +may start before fm_start, and the range covered by the last returned +extent may end after fm_length. All offsets and lengths are in bytes. + +Certain flags to modify the way in which mappings are looked up can be +set in fm_flags. If the kernel doesn't understand some particular +flags, it will return EBADR and the contents of fm_flags will contain +the set of flags which caused the error. If the kernel is compatible +with all flags passed, the contents of fm_flags will be unmodified. +It is up to userspace to determine whether rejection of a particular +flag is fatal to it's operation. This scheme is intended to allow the +fiemap interface to grow in the future but without losing +compatibility with old software. + +fm_extent_count specifies the number of elements in the fm_extents[] array +that can be used to return extents. If fm_extent_count is zero, then the +fm_extents[] array is ignored (no extents will be returned), and the +fm_mapped_extents count will hold the number of extents needed in +fm_extents[] to hold the file's current mapping. Note that there is +nothing to prevent the file from changing between calls to FIEMAP. + +The following flags can be set in fm_flags: + +* FIEMAP_FLAG_SYNC +If this flag is set, the kernel will sync the file before mapping extents. + +* FIEMAP_FLAG_XATTR +If this flag is set, the extents returned will describe the inodes +extended attribute lookup tree, instead of it's data tree. + + +Extent Mapping +-------------- + +Extent information is returned within the embedded fm_extents array +which userspace must allocate along with the fiemap structure. The +number of elements in the fiemap_extents[] array should be passed via +fm_extent_count. The number of extents mapped by kernel will be +returned via fm_mapped_extents. If the number of fiemap_extents +allocated is less than would be required to map the requested range, +the maximum number of extents that can be mapped in the fm_extent[] +array will be returned and fm_mapped_extents will be equal to +fm_extent_count. In that case, the last extent in the array will not +complete the requested range and will not have the FIEMAP_EXTENT_LAST +flag set (see the next section on extent flags). + +Each extent is described by a single fiemap_extent structure as +returned in fm_extents. + +struct fiemap_extent { + __u64 fe_logical; /* logical offset in bytes for the start of + * the extent */ + __u64 fe_physical; /* physical offset in bytes for the start + * of the extent */ + __u64 fe_length; /* length in bytes for the extent */ + __u64 fe_reserved64[2]; + __u32 fe_flags; /* FIEMAP_EXTENT_* flags for this extent */ + __u32 fe_reserved[3]; +}; + +All offsets and lengths are in bytes and mirror those on disk. It is valid +for an extents logical offset to start before the request or it's logical +length to extend past the request. Unless FIEMAP_EXTENT_NOT_ALIGNED is +returned, fe_logical, fe_physical, and fe_length will be aligned to the +block size of the file system. With the exception of extents flagged as +FIEMAP_EXTENT_MERGED, adjacent extents will not be merged. + +The fe_flags field contains flags which describe the extent returned. +A special flag, FIEMAP_EXTENT_LAST is always set on the last extent in +the file so that the process making fiemap calls can determine when no +more extents are available, without having to call the ioctl again. + +Some flags are intentionally vague and will always be set in the +presence of other more specific flags. This way a program looking for +a general property does not have to know all existing and future flags +which imply that property. + +For example, if FIEMAP_EXTENT_DATA_INLINE or FIEMAP_EXTENT_DATA_TAIL +are set, FIEMAP_EXTENT_NOT_ALIGNED will also be set. A program looking +for inline or tail-packed data can key on the specific flag. Software +which simply cares not to try operating on non-aligned extents +however, can just key on FIEMAP_EXTENT_NOT_ALIGNED, and not have to +worry about all present and future flags which might imply unaligned +data. Note that the opposite is not true - it would be valid for +FIEMAP_EXTENT_NOT_ALIGNED to appear alone. + +* FIEMAP_EXTENT_LAST +This is the last extent in the file. A mapping attempt past this +extent will return nothing. + +* FIEMAP_EXTENT_UNKNOWN +The location of this extent is currently unknown. This may indicate +the data is stored on an inaccessible volume or that no storage has +been allocated for the file yet. + +* FIEMAP_EXTENT_DELALLOC + - This will also set FIEMAP_EXTENT_UNKNOWN. +Delayed allocation - while there is data for this extent, it's +physical location has not been allocated yet. + +* FIEMAP_EXTENT_ENCODED +This extent does not consist of plain filesystem blocks but is +encoded (e.g. encrypted or compressed). Reading the data in this +extent via I/O to the block device will have undefined results. + +Note that it is *always* undefined to try to update the data +in-place by writing to the indicated location without the +assistance of the filesystem, or to access the data using the +information returned by the FIEMAP interface while the filesystem +is mounted. In other words, user applications may only read the +extent data via I/O to the block device while the filesystem is +unmounted, and then only if the FIEMAP_EXTENT_ENCODED flag is +clear; user applications must not try reading or writing to the +filesystem via the block device under any other circumstances. + +* FIEMAP_EXTENT_DATA_ENCRYPTED + - This will also set FIEMAP_EXTENT_ENCODED +The data in this extent has been encrypted by the file system. + +* FIEMAP_EXTENT_NOT_ALIGNED +Extent offsets and length are not guaranteed to be block aligned. + +* FIEMAP_EXTENT_DATA_INLINE + This will also set FIEMAP_EXTENT_NOT_ALIGNED +Data is located within a meta data block. + +* FIEMAP_EXTENT_DATA_TAIL + This will also set FIEMAP_EXTENT_NOT_ALIGNED +Data is packed into a block with data from other files. + +* FIEMAP_EXTENT_UNWRITTEN +Unwritten extent - the extent is allocated but it's data has not been +initialized. This indicates the extent's data will be all zero if read +through the filesystem but the contents are undefined if read directly from +the device. + +* FIEMAP_EXTENT_MERGED +This will be set when a file does not support extents, i.e., it uses a block +based addressing scheme. Since returning an extent for each block back to +userspace would be highly inefficient, the kernel will try to merge most +adjacent blocks into 'extents'. + + +VFS -> File System Implementation +--------------------------------- + +File systems wishing to support fiemap must implement a ->fiemap callback on +their inode_operations structure. The fs ->fiemap call is responsible for +defining it's set of supported fiemap flags, and calling a helper function on +each discovered extent: + +struct inode_operations { + ... + + int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, + u64 len); + +->fiemap is passed struct fiemap_extent_info which describes the +fiemap request: + +struct fiemap_extent_info { + unsigned int fi_flags; /* Flags as passed from user */ + unsigned int fi_extents_mapped; /* Number of mapped extents */ + unsigned int fi_extents_max; /* Size of fiemap_extent array */ + struct fiemap_extent *fi_extents_start; /* Start of fiemap_extent array */ +}; + +It is intended that the file system should not need to access any of this +structure directly. + + +Flag checking should be done at the beginning of the ->fiemap callback via the +fiemap_check_flags() helper: + +int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags); + +The struct fieinfo should be passed in as recieved from ioctl_fiemap(). The +set of fiemap flags which the fs understands should be passed via fs_flags. If +fiemap_check_flags finds invalid user flags, it will place the bad values in +fieinfo->fi_flags and return -EBADR. If the file system gets -EBADR, from +fiemap_check_flags(), it should immediately exit, returning that error back to +ioctl_fiemap(). + + +For each extent in the request range, the file system should call +the helper function, fiemap_fill_next_extent(): + +int fiemap_fill_next_extent(struct fiemap_extent_info *info, u64 logical, + u64 phys, u64 len, u32 flags, u32 dev); + +fiemap_fill_next_extent() will use the passed values to populate the +next free extent in the fm_extents array. 'General' extent flags will +automatically be set from specific flags on behalf of the calling file +system so that the userspace API is not broken. + +fiemap_fill_next_extent() returns 0 on success, and 1 when the +user-supplied fm_extents array is full. If an error is encountered +while copying the extent to user memory, -EFAULT will be returned. diff --git a/fs/ioctl.c b/fs/ioctl.c index 7db32b3382d..045d9601fbb 100644 --- a/fs/ioctl.c +++ b/fs/ioctl.c @@ -16,6 +16,9 @@ #include +/* So that the fiemap access checks can't overflow on 32 bit machines. */ +#define FIEMAP_MAX_EXTENTS (UINT_MAX / sizeof(struct fiemap_extent)) + /** * vfs_ioctl - call filesystem specific ioctl methods * @filp: open file to invoke ioctl method on @@ -71,6 +74,156 @@ static int ioctl_fibmap(struct file *filp, int __user *p) return put_user(res, p); } +/** + * fiemap_fill_next_extent - Fiemap helper function + * @fieinfo: Fiemap context passed into ->fiemap + * @logical: Extent logical start offset, in bytes + * @phys: Extent physical start offset, in bytes + * @len: Extent length, in bytes + * @flags: FIEMAP_EXTENT flags that describe this extent + * + * Called from file system ->fiemap callback. Will populate extent + * info as passed in via arguments and copy to user memory. On + * success, extent count on fieinfo is incremented. + * + * Returns 0 on success, -errno on error, 1 if this was the last + * extent that will fit in user array. + */ +#define SET_UNKNOWN_FLAGS (FIEMAP_EXTENT_DELALLOC) +#define SET_NO_UNMOUNTED_IO_FLAGS (FIEMAP_EXTENT_DATA_ENCRYPTED) +#define SET_NOT_ALIGNED_FLAGS (FIEMAP_EXTENT_DATA_TAIL|FIEMAP_EXTENT_DATA_INLINE) +int fiemap_fill_next_extent(struct fiemap_extent_info *fieinfo, u64 logical, + u64 phys, u64 len, u32 flags) +{ + struct fiemap_extent extent; + struct fiemap_extent *dest = fieinfo->fi_extents_start; + + /* only count the extents */ + if (fieinfo->fi_extents_max == 0) { + fieinfo->fi_extents_mapped++; + return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0; + } + + if (fieinfo->fi_extents_mapped >= fieinfo->fi_extents_max) + return 1; + + if (flags & SET_UNKNOWN_FLAGS) + flags |= FIEMAP_EXTENT_UNKNOWN; + if (flags & SET_NO_UNMOUNTED_IO_FLAGS) + flags |= FIEMAP_EXTENT_ENCODED; + if (flags & SET_NOT_ALIGNED_FLAGS) + flags |= FIEMAP_EXTENT_NOT_ALIGNED; + + memset(&extent, 0, sizeof(extent)); + extent.fe_logical = logical; + extent.fe_physical = phys; + extent.fe_length = len; + extent.fe_flags = flags; + + dest += fieinfo->fi_extents_mapped; + if (copy_to_user(dest, &extent, sizeof(extent))) + return -EFAULT; + + fieinfo->fi_extents_mapped++; + if (fieinfo->fi_extents_mapped == fieinfo->fi_extents_max) + return 1; + return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0; +} +EXPORT_SYMBOL(fiemap_fill_next_extent); + +/** + * fiemap_check_flags - check validity of requested flags for fiemap + * @fieinfo: Fiemap context passed into ->fiemap + * @fs_flags: Set of fiemap flags that the file system understands + * + * Called from file system ->fiemap callback. This will compute the + * intersection of valid fiemap flags and those that the fs supports. That + * value is then compared against the user supplied flags. In case of bad user + * flags, the invalid values will be written into the fieinfo structure, and + * -EBADR is returned, which tells ioctl_fiemap() to return those values to + * userspace. For this reason, a return code of -EBADR should be preserved. + * + * Returns 0 on success, -EBADR on bad flags. + */ +int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags) +{ + u32 incompat_flags; + + incompat_flags = fieinfo->fi_flags & ~(FIEMAP_FLAGS_COMPAT & fs_flags); + if (incompat_flags) { + fieinfo->fi_flags = incompat_flags; + return -EBADR; + } + return 0; +} +EXPORT_SYMBOL(fiemap_check_flags); + +static int fiemap_check_ranges(struct super_block *sb, + u64 start, u64 len, u64 *new_len) +{ + *new_len = len; + + if (len == 0) + return -EINVAL; + + if (start > sb->s_maxbytes) + return -EFBIG; + + /* + * Shrink request scope to what the fs can actually handle. + */ + if ((len > sb->s_maxbytes) || + (sb->s_maxbytes - len) < start) + *new_len = sb->s_maxbytes - start; + + return 0; +} + +static int ioctl_fiemap(struct file *filp, unsigned long arg) +{ + struct fiemap fiemap; + struct fiemap_extent_info fieinfo = { 0, }; + struct inode *inode = filp->f_path.dentry->d_inode; + struct super_block *sb = inode->i_sb; + u64 len; + int error; + + if (!inode->i_op->fiemap) + return -EOPNOTSUPP; + + if (copy_from_user(&fiemap, (struct fiemap __user *)arg, + sizeof(struct fiemap))) + return -EFAULT; + + if (fiemap.fm_extent_count > FIEMAP_MAX_EXTENTS) + return -EINVAL; + + error = fiemap_check_ranges(sb, fiemap.fm_start, fiemap.fm_length, + &len); + if (error) + return error; + + fieinfo.fi_flags = fiemap.fm_flags; + fieinfo.fi_extents_max = fiemap.fm_extent_count; + fieinfo.fi_extents_start = (struct fiemap_extent *)(arg + sizeof(fiemap)); + + if (fiemap.fm_extent_count != 0 && + !access_ok(VERIFY_WRITE, fieinfo.fi_extents_start, + fieinfo.fi_extents_max * sizeof(struct fiemap_extent))) + return -EFAULT; + + if (fieinfo.fi_flags & FIEMAP_FLAG_SYNC) + filemap_write_and_wait(inode->i_mapping); + + error = inode->i_op->fiemap(inode, &fieinfo, fiemap.fm_start, len); + fiemap.fm_flags = fieinfo.fi_flags; + fiemap.fm_mapped_extents = fieinfo.fi_extents_mapped; + if (copy_to_user((char *)arg, &fiemap, sizeof(fiemap))) + error = -EFAULT; + + return error; +} + static int file_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { @@ -80,6 +233,8 @@ static int file_ioctl(struct file *filp, unsigned int cmd, switch (cmd) { case FIBMAP: return ioctl_fibmap(filp, p); + case FS_IOC_FIEMAP: + return ioctl_fiemap(filp, arg); case FIGETBSZ: return put_user(inode->i_sb->s_blocksize, p); case FIONREAD: diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h new file mode 100644 index 00000000000..671decbd2ae --- /dev/null +++ b/include/linux/fiemap.h @@ -0,0 +1,64 @@ +/* + * FS_IOC_FIEMAP ioctl infrastructure. + * + * Some portions copyright (C) 2007 Cluster File Systems, Inc + * + * Authors: Mark Fasheh + * Kalpak Shah + * Andreas Dilger + */ + +#ifndef _LINUX_FIEMAP_H +#define _LINUX_FIEMAP_H + +struct fiemap_extent { + __u64 fe_logical; /* logical offset in bytes for the start of + * the extent from the beginning of the file */ + __u64 fe_physical; /* physical offset in bytes for the start + * of the extent from the beginning of the disk */ + __u64 fe_length; /* length in bytes for this extent */ + __u64 fe_reserved64[2]; + __u32 fe_flags; /* FIEMAP_EXTENT_* flags for this extent */ + __u32 fe_reserved[3]; +}; + +struct fiemap { + __u64 fm_start; /* logical offset (inclusive) at + * which to start mapping (in) */ + __u64 fm_length; /* logical length of mapping which + * userspace wants (in) */ + __u32 fm_flags; /* FIEMAP_FLAG_* flags for request (in/out) */ + __u32 fm_mapped_extents;/* number of extents that were mapped (out) */ + __u32 fm_extent_count; /* size of fm_extents array (in) */ + __u32 fm_reserved; + struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */ +}; + +#define FIEMAP_MAX_OFFSET (~0ULL) + +#define FIEMAP_FLAG_SYNC 0x00000001 /* sync file data before map */ +#define FIEMAP_FLAG_XATTR 0x00000002 /* map extended attribute tree */ + +#define FIEMAP_FLAGS_COMPAT (FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR) + +#define FIEMAP_EXTENT_LAST 0x00000001 /* Last extent in file. */ +#define FIEMAP_EXTENT_UNKNOWN 0x00000002 /* Data location unknown. */ +#define FIEMAP_EXTENT_DELALLOC 0x00000004 /* Location still pending. + * Sets EXTENT_UNKNOWN. */ +#define FIEMAP_EXTENT_ENCODED 0x00000008 /* Data can not be read + * while fs is unmounted */ +#define FIEMAP_EXTENT_DATA_ENCRYPTED 0x00000080 /* Data is encrypted by fs. + * Sets EXTENT_NO_BYPASS. */ +#define FIEMAP_EXTENT_NOT_ALIGNED 0x00000100 /* Extent offsets may not be + * block aligned. */ +#define FIEMAP_EXTENT_DATA_INLINE 0x00000200 /* Data mixed with metadata. + * Sets EXTENT_NOT_ALIGNED.*/ +#define FIEMAP_EXTENT_DATA_TAIL 0x00000400 /* Multiple files in block. + * Sets EXTENT_NOT_ALIGNED.*/ +#define FIEMAP_EXTENT_UNWRITTEN 0x00000800 /* Space allocated, but + * no data (i.e. zero). */ +#define FIEMAP_EXTENT_MERGED 0x00001000 /* File does not natively + * support extents. Result + * merged for efficiency. */ + +#endif /* _LINUX_FIEMAP_H */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 580b513668f..194fb237a30 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -231,6 +231,7 @@ extern int dir_notify_enable; #define FS_IOC_SETFLAGS _IOW('f', 2, long) #define FS_IOC_GETVERSION _IOR('v', 1, long) #define FS_IOC_SETVERSION _IOW('v', 2, long) +#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap) #define FS_IOC32_GETFLAGS _IOR('f', 1, int) #define FS_IOC32_SETFLAGS _IOW('f', 2, int) #define FS_IOC32_GETVERSION _IOR('v', 1, int) @@ -291,6 +292,7 @@ extern int dir_notify_enable; #include #include #include +#include #include #include @@ -1178,6 +1180,20 @@ extern void dentry_unhash(struct dentry *dentry); */ extern int file_permission(struct file *, int); +/* + * VFS FS_IOC_FIEMAP helper definitions. + */ +struct fiemap_extent_info { + unsigned int fi_flags; /* Flags as passed from user */ + unsigned int fi_extents_mapped; /* Number of mapped extents */ + unsigned int fi_extents_max; /* Size of fiemap_extent array */ + struct fiemap_extent *fi_extents_start; /* Start of fiemap_extent + * array */ +}; +int fiemap_fill_next_extent(struct fiemap_extent_info *info, u64 logical, + u64 phys, u64 len, u32 flags); +int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags); + /* * File types * @@ -1287,6 +1303,8 @@ struct inode_operations { void (*truncate_range)(struct inode *, loff_t, loff_t); long (*fallocate)(struct inode *inode, int mode, loff_t offset, loff_t len); + int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, + u64 len); }; struct seq_file; -- cgit v1.2.3-70-g09d2 From 1d992ce905c838c2ca26fff8f2417cd31f667fd5 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Fri, 3 Oct 2008 15:23:44 -0700 Subject: SubmitChecklist: interfaces changes should CC linux-api@ Mention that patches that change the kernel-userland interface should be CCed to the new list linux-api@vger.kernel.org. Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/SubmitChecklist | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist index da10e071424..21f0795af20 100644 --- a/Documentation/SubmitChecklist +++ b/Documentation/SubmitChecklist @@ -67,6 +67,8 @@ kernel patches. 19: All new userspace interfaces are documented in Documentation/ABI/. See Documentation/ABI/README for more information. + Patches that change userspace interfaces should be CCed to + linux-api@vger.kernel.org. 20: Check that it all passes `make headers_check'. -- cgit v1.2.3-70-g09d2 From 09b05f5ee04cd2e2af3384d50646f53c76712f10 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Fri, 3 Oct 2008 15:23:45 -0700 Subject: Documentation/HOWTO: info about interface changes should CC linux-api@vger The "Documentation" section of this file mentions that when an interface change is made, I should be CCed with info about the change (so that man-pages can document it). Additionally request that this info be CCed to the new linux-api@vger.kernel.org list. Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/HOWTO | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/HOWTO b/Documentation/HOWTO index c2371c5a98f..48a3955f05f 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -77,7 +77,8 @@ documentation files are also added which explain how to use the feature. When a kernel change causes the interface that the kernel exposes to userspace to change, it is recommended that you send the information or a patch to the manual pages explaining the change to the manual pages -maintainer at mtk.manpages@gmail.com. +maintainer at mtk.manpages@gmail.com, and CC the list +linux-api@vger.kernel.org. Here is a list of files that are in the kernel source tree that are required reading: -- cgit v1.2.3-70-g09d2 From da3808e10faca68b064ac897753fa4e1707d29a4 Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Tue, 30 Sep 2008 02:46:41 -0300 Subject: V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U Correct firmware type to MTS Correct audio routing for composite/s-video Add DVB-T detection. This patch uses the eeprom hash method for detection as the vendor/product ids are also used for the DIGIVOX_AD. This may be a clone of the same product. Explanatory text has been added prior to the hask look-up in anticipation that it may help others. The following has been tested to work: Analogue TV (PAL-I) Composite In DVB-T (UK Crystal Palace) USB AUDIO The following has not been tested but probably works: S-Video In Signed-off-by: Darron Broad Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 2 +- drivers/media/video/em28xx/em28xx-cards.c | 26 +++++++++++++++++++++----- drivers/media/video/em28xx/em28xx-dvb.c | 9 +++++++++ 3 files changed, 31 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 89c7f32abf9..53449cb99b1 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -46,7 +46,7 @@ 45 -> Pinnacle PCTV DVB-T (em2870) 46 -> Compro, VideoMate U3 (em2870) [185b:2870] 47 -> KWorld DVB-T 305U (em2880) [eb1a:e305] - 48 -> KWorld DVB-T 310U (em2880) + 48 -> KWorld DVB-T 310U (em2880) [eb1a:e310] 49 -> MSI DigiVox A/D (em2880) [eb1a:e310] 50 -> MSI DigiVox A/D II (em2880) [eb1a:e320] 51 -> Terratec Hybrid XS Secam (em2880) [0ccd:004c] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index c7456e97665..279307cc3ad 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -930,22 +930,23 @@ struct em28xx_board em28xx_boards[] = { }, [EM2880_BOARD_KWORLD_DVB_310U] = { .name = "KWorld DVB-T 310U", - .valid = EM28XX_BOARD_NOT_VALIDATED, .vchannels = 3, .tuner_type = TUNER_XC2028, + .has_dvb = 1, + .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, - .amux = 0, + .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, - .amux = 1, - }, { + .amux = EM28XX_AMUX_AC97_LINE_IN, + }, { /* S-video has not been tested yet */ .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, - .amux = 1, + .amux = EM28XX_AMUX_AC97_LINE_IN, } }, }, [EM2881_BOARD_DNT_DA2_HYBRID] = { @@ -1260,6 +1261,7 @@ static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = { static struct em28xx_hash_table em28xx_eeprom_hash [] = { /* P/N: SA 60002070465 Tuner: TVF7533-MF */ {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, + {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ @@ -1745,6 +1747,20 @@ void em28xx_card_setup(struct em28xx *dev) break; case EM2820_BOARD_UNKNOWN: case EM2800_BOARD_UNKNOWN: + /* + * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. + * + * This occurs because they share identical USB vendor and + * product IDs. + * + * What we do here is look up the EEPROM hash of the K-WORLD + * and if it is found then we decide that we do not have + * a DIGIVOX and reset the device to the K-WORLD instead. + * + * This solution is only valid if they do not share eeprom + * hash identities which has not been determined as yet. + */ + case EM2880_BOARD_MSI_DIGIVOX_AD: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); break; diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 4b992bc0083..d2b1a1a5268 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -452,6 +452,15 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2880_BOARD_KWORLD_DVB_310U: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_zl10353_with_xc3028, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card" " isn't supported yet\n", -- cgit v1.2.3-70-g09d2 From 95430c0b140c31cb9e39f876afe1c0e9947d1aaf Mon Sep 17 00:00:00 2001 From: Rémi Denis-Courmont Date: Sun, 5 Oct 2008 11:16:36 -0700 Subject: Phonet: pipe end-point protocol documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- Documentation/networking/phonet.txt | 54 +++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt index 57d3e59edb1..0e6e592f4f5 100644 --- a/Documentation/networking/phonet.txt +++ b/Documentation/networking/phonet.txt @@ -112,6 +112,60 @@ However, connect() and getpeername() are not supported, as they did not seem useful with Phonet usages (could be added easily). +Phonet Pipe protocol +-------------------- + +The Phonet Pipe protocol is a simple sequenced packets protocol +with end-to-end congestion control. It uses the passive listening +socket paradigm. The listening socket is bound to an unique free object +ID. Each listening socket can handle up to 255 simultaneous +connections, one per accept()'d socket. + + int lfd, cfd; + + lfd = socket(PF_PHONET, SOCK_SEQPACKET, PN_PROTO_PIPE); + listen (lfd, INT_MAX); + + /* ... */ + cfd = accept(lfd, NULL, NULL); + for (;;) + { + char buf[...]; + ssize_t len = read(cfd, buf, sizeof(buf)); + + /* ... */ + + write(cfd, msg, msglen); + } + +Connections are established between two endpoints by a "third party" +application. This means that both endpoints are passive; so connect() +is not possible. + +WARNING: +When polling a connected pipe socket for writability, there is an +intrinsic race condition whereby writability might be lost between the +polling and the writing system calls. In this case, the socket will +block until write because possible again, unless non-blocking mode +becomes enabled. + + +The pipe protocol provides two socket options at the SOL_PNPIPE level: + + PNPIPE_ENCAP accepts one integer value (int) of: + + PNPIPE_ENCAP_NONE: The socket operates normally (default). + + PNPIPE_ENCAP_IP: The socket is used as a backend for a virtual IP + interface. This requires CAP_NET_ADMIN capability. GPRS data + support on Nokia modems can use this. Note that the socket cannot + be reliably poll()'d or read() from while in this mode. + + PNPIPE_IFINDEX is a read-only integer value. It contains the + interface index of the network interface created by PNPIPE_ENCAP, + or zero if encapsulation is off. + + Authors ------- -- cgit v1.2.3-70-g09d2 From 1b483a6a7b2998e9c98ad985d7494b9b725bd228 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 15 Sep 2008 23:09:08 +0000 Subject: powerpc: Remove remains of /proc/ppc_htab commit 14cf11af6cf608eb8c23e989ddb17a715ddce109 ("powerpc: Merge enough to start building in arch/powerpc.") unwired /proc/ppc_htab, and commit 917f0af9e5a9ceecf9e72537fabb501254ba321d ("powerpc: Remove arch/ppc and include/asm-ppc") removed the rest of the /proc/ppc_htab support, but there are still a few references left. Kill them for good. Signed-off-by: Geert Uytterhoeven Signed-off-by: Benjamin Herrenschmidt --- Documentation/powerpc/00-INDEX | 2 - Documentation/powerpc/ppc_htab.txt | 118 ------------------------------------- include/linux/proc_fs.h | 1 - 3 files changed, 121 deletions(-) delete mode 100644 Documentation/powerpc/ppc_htab.txt (limited to 'Documentation') diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index 29d839ce732..2f31853899c 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -18,8 +18,6 @@ mpc52xx.txt - Linux 2.6.x on MPC52xx family mpc52xx-device-tree-bindings.txt - MPC5200 Device Tree Bindings -ppc_htab.txt - - info about the Linux/PPC /proc/ppc_htab entry smp.txt - use and state info about Linux/PPC on MP machines sound.txt diff --git a/Documentation/powerpc/ppc_htab.txt b/Documentation/powerpc/ppc_htab.txt deleted file mode 100644 index 8b8c7df29fa..00000000000 --- a/Documentation/powerpc/ppc_htab.txt +++ /dev/null @@ -1,118 +0,0 @@ - Information about /proc/ppc_htab -===================================================================== - -This document and the related code was written by me (Cort Dougan), please -email me (cort@fsmlabs.com) if you have questions, comments or corrections. - -Last Change: 2.16.98 - -This entry in the proc directory is readable by all users but only -writable by root. - -The ppc_htab interface is a user level way of accessing the -performance monitoring registers as well as providing information -about the PTE hash table. - -1. Reading - - Reading this file will give you information about the memory management - hash table that serves as an extended tlb for page translation on the - powerpc. It will also give you information about performance measurement - specific to the cpu that you are using. - - Explanation of the 604 Performance Monitoring Fields: - MMCR0 - the current value of the MMCR0 register - PMC1 - PMC2 - the value of the performance counters and a - description of what events they are counting - which are based on MMCR0 bit settings. - Explanation of the PTE Hash Table fields: - - Size - hash table size in Kb. - Buckets - number of buckets in the table. - Address - the virtual kernel address of the hash table base. - Entries - the number of ptes that can be stored in the hash table. - User/Kernel - how many pte's are in use by the kernel or user at that time. - Overflows - How many of the entries are in their secondary hash location. - Percent full - ratio of free pte entries to in use entries. - Reloads - Count of how many hash table misses have occurred - that were fixed with a reload from the linux tables. - Should always be 0 on 603 based machines. - Non-error Misses - Count of how many hash table misses have occurred - that were completed with the creation of a pte in the linux - tables with a call to do_page_fault(). - Error Misses - Number of misses due to errors such as bad address - and permission violations. This includes kernel access of - bad user addresses that are fixed up by the trap handler. - - Note that calculation of the data displayed from /proc/ppc_htab takes - a long time and spends a great deal of time in the kernel. It would - be quite hard on performance to read this file constantly. In time - there may be a counter in the kernel that allows successive reads from - this file only after a given amount of time has passed to reduce the - possibility of a user slowing the system by reading this file. - -2. Writing - - Writing to the ppc_htab allows you to change the characteristics of - the powerpc PTE hash table and setup performance monitoring. - - Resizing the PTE hash table is not enabled right now due to many - complications with moving the hash table, rehashing the entries - and many many SMP issues that would have to be dealt with. - - Write options to ppc_htab: - - - To set the size of the hash table to 64Kb: - - echo 'size 64' > /proc/ppc_htab - - The size must be a multiple of 64 and must be greater than or equal to - 64. - - - To turn off performance monitoring: - - echo 'off' > /proc/ppc_htab - - - To reset the counters without changing what they're counting: - - echo 'reset' > /proc/ppc_htab - - Note that counting will continue after the reset if it is enabled. - - - To count only events in user mode or only in kernel mode: - - echo 'user' > /proc/ppc_htab - ...or... - echo 'kernel' > /proc/ppc_htab - - Note that these two options are exclusive of one another and the - lack of either of these options counts user and kernel. - Using 'reset' and 'off' reset these flags. - - - The 604 has 2 performance counters which can each count events from - a specific set of events. These sets are disjoint so it is not - possible to count _any_ combination of 2 events. One event can - be counted by PMC1 and one by PMC2. - - To start counting a particular event use: - - echo 'event' > /proc/ppc_htab - - and choose from these events: - - PMC1 - ---- - 'ic miss' - instruction cache misses - 'dtlb' - data tlb misses (not hash table misses) - - PMC2 - ---- - 'dc miss' - data cache misses - 'itlb' - instruction tlb misses (not hash table misses) - 'load miss time' - cycles to complete a load miss - -3. Bugs - - The PMC1 and PMC2 counters can overflow and give no indication of that - in /proc/ppc_htab. diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index fb61850d1cf..27d534f4470 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -139,7 +139,6 @@ extern int proc_readdir(struct file *, void *, filldir_t); extern struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *); extern const struct file_operations proc_kcore_operations; -extern const struct file_operations ppc_htab_operations; extern int pid_ns_prepare_proc(struct pid_namespace *ns); extern void pid_ns_release_proc(struct pid_namespace *ns); -- cgit v1.2.3-70-g09d2 From 94576b22ce1ad346cb09f05bf4f06be33e0eef49 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 15 Sep 2008 23:10:54 +0000 Subject: powerpc: Remove outdated Documentation/powerpc/smp.txt Documentation/powerpc/smp.txt is so outdated that it makes sense to just remove it. Signed-off-by: Geert Uytterhoeven Signed-off-by: Benjamin Herrenschmidt --- Documentation/powerpc/00-INDEX | 2 -- Documentation/powerpc/smp.txt | 34 ---------------------------------- 2 files changed, 36 deletions(-) delete mode 100644 Documentation/powerpc/smp.txt (limited to 'Documentation') diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index 2f31853899c..e3960b8c868 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -18,8 +18,6 @@ mpc52xx.txt - Linux 2.6.x on MPC52xx family mpc52xx-device-tree-bindings.txt - MPC5200 Device Tree Bindings -smp.txt - - use and state info about Linux/PPC on MP machines sound.txt - info on sound support under Linux/PPC zImage_layout.txt diff --git a/Documentation/powerpc/smp.txt b/Documentation/powerpc/smp.txt deleted file mode 100644 index 5b581b849ff..00000000000 --- a/Documentation/powerpc/smp.txt +++ /dev/null @@ -1,34 +0,0 @@ - Information about Linux/PPC SMP mode -===================================================================== - -This document and the related code was written by me -(Cort Dougan, cort@fsmlabs.com) please email me if you have questions, -comments or corrections. - -Last Change: 3.31.99 - -If you want to help by writing code or testing different hardware please -email me! - -1. State of Supported Hardware - - PowerSurge Architecture - tested on UMAX s900, Apple 9600 - The second processor on this machine boots up just fine and - enters its idle loop. Hopefully a completely working SMP kernel - on this machine will be done shortly. - - The code makes the assumption of only two processors. The changes - necessary to work with any number would not be overly difficult but - I don't have any machines with >2 processors so it's not high on my - list of priorities. If anyone else would like do to the work email - me and I can point out the places that need changed. If you have >2 - processors and don't want to add support yourself let me know and I - can take a look into it. - - BeBox - BeBox support hasn't been added to the 2.1.X kernels from 2.0.X - but work is being done and SMP support for BeBox is in the works. - - CHRP - CHRP SMP works and is fairly solid. It's been tested on the IBM F50 - with 4 processors for quite some time now. -- cgit v1.2.3-70-g09d2 From a5ac0129249611fc4a35e6d7cd9b8462d67e5798 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 13 Oct 2008 14:07:19 +0800 Subject: Blackfin arch: add supporting for kgdb Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- Documentation/blackfin/kgdb.txt | 155 ------ arch/blackfin/Kconfig.debug | 3 + arch/blackfin/include/asm/kgdb.h | 21 +- arch/blackfin/kernel/kgdb.c | 711 ++++++++++++++++++------ arch/blackfin/kernel/traps.c | 35 +- arch/blackfin/mach-bf561/include/mach/mem_map.h | 18 +- arch/blackfin/mach-common/entry.S | 9 +- arch/blackfin/mach-common/ints-priority.c | 4 - 8 files changed, 606 insertions(+), 350 deletions(-) delete mode 100644 Documentation/blackfin/kgdb.txt (limited to 'Documentation') diff --git a/Documentation/blackfin/kgdb.txt b/Documentation/blackfin/kgdb.txt deleted file mode 100644 index 84f6a484ae9..00000000000 --- a/Documentation/blackfin/kgdb.txt +++ /dev/null @@ -1,155 +0,0 @@ - A Simple Guide to Configure KGDB - - Sonic Zhang - Aug. 24th 2006 - - -This KGDB patch enables the kernel developer to do source level debugging on -the kernel for the Blackfin architecture. The debugging works over either the -ethernet interface or one of the uarts. Both software breakpoints and -hardware breakpoints are supported in this version. -http://docs.blackfin.uclinux.org/doku.php?id=kgdb - - -2 known issues: -1. This bug: - http://blackfin.uclinux.org/tracker/index.php?func=detail&aid=544&group_id=18&atid=145 - The GDB client for Blackfin uClinux causes incorrect values of local - variables to be displayed when the user breaks the running of kernel in GDB. -2. Because of a hardware bug in Blackfin 533 v1.0.3: - 05000067 - Watchpoints (Hardware Breakpoints) are not supported - Hardware breakpoints cannot be set properly. - - -Debug over Ethernet: - -1. Compile and install the cross platform version of gdb for blackfin, which - can be found at $(BINROOT)/bfin-elf-gdb. - -2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under - "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb". - With this selected, option "Full Symbolic/Source Debugging support" and - "Compile the kernel with frame pointers" are also selected. - -3. Select option "KGDB: connect over (Ethernet)". Add "kgdboe=@target-IP/,@host-IP/" to - the option "Compiled-in Kernel Boot Parameter" under "Kernel hacking". - -4. Connect minicom to the serial port and boot the kernel image. - -5. Configure the IP "/> ifconfig eth0 target-IP" - -6. Start GDB client "bfin-elf-gdb vmlinux". - -7. Connect to the target "(gdb) target remote udp:target-IP:6443". - -8. Set software breakpoint "(gdb) break sys_open". - -9. Continue "(gdb) c". - -10. Run ls in the target console "/> ls". - -11. Breakpoint hits. "Breakpoint 1: sys_open(..." - -12. Display local variables and function paramters. - (*) This operation gives wrong results, see known issue 1. - -13. Single stepping "(gdb) si". - -14. Remove breakpoint 1. "(gdb) del 1" - -15. Set hardware breakpoint "(gdb) hbreak sys_open". - -16. Continue "(gdb) c". - -17. Run ls in the target console "/> ls". - -18. Hardware breakpoint hits. "Breakpoint 1: sys_open(...". - (*) This hardware breakpoint will not be hit, see known issue 2. - -19. Continue "(gdb) c". - -20. Interrupt the target in GDB "Ctrl+C". - -21. Detach from the target "(gdb) detach". - -22. Exit GDB "(gdb) quit". - - -Debug over the UART: - -1. Compile and install the cross platform version of gdb for blackfin, which - can be found at $(BINROOT)/bfin-elf-gdb. - -2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under - "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb". - With this selected, option "Full Symbolic/Source Debugging support" and - "Compile the kernel with frame pointers" are also selected. - -3. Select option "KGDB: connect over (UART)". Set "KGDB: UART port number" to be - a different one from the console. Don't forget to change the mode of - blackfin serial driver to PIO. Otherwise kgdb works incorrectly on UART. - -4. If you want connect to kgdb when the kernel boots, enable - "KGDB: Wait for gdb connection early" - -5. Compile kernel. - -6. Connect minicom to the serial port of the console and boot the kernel image. - -7. Start GDB client "bfin-elf-gdb vmlinux". - -8. Set the baud rate in GDB "(gdb) set remotebaud 57600". - -9. Connect to the target on the second serial port "(gdb) target remote /dev/ttyS1". - -10. Set software breakpoint "(gdb) break sys_open". - -11. Continue "(gdb) c". - -12. Run ls in the target console "/> ls". - -13. A breakpoint is hit. "Breakpoint 1: sys_open(..." - -14. All other operations are the same as that in KGDB over Ethernet. - - -Debug over the same UART as console: - -1. Compile and install the cross platform version of gdb for blackfin, which - can be found at $(BINROOT)/bfin-elf-gdb. - -2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under - "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb". - With this selected, option "Full Symbolic/Source Debugging support" and - "Compile the kernel with frame pointers" are also selected. - -3. Select option "KGDB: connect over UART". Set "KGDB: UART port number" to console. - Don't forget to change the mode of blackfin serial driver to PIO. - Otherwise kgdb works incorrectly on UART. - -4. If you want connect to kgdb when the kernel boots, enable - "KGDB: Wait for gdb connection early" - -5. Connect minicom to the serial port and boot the kernel image. - -6. (Optional) Ask target to wait for gdb connection by entering Ctrl+A. In minicom, you should enter Ctrl+A+A. - -7. Start GDB client "bfin-elf-gdb vmlinux". - -8. Set the baud rate in GDB "(gdb) set remotebaud 57600". - -9. Connect to the target "(gdb) target remote /dev/ttyS0". - -10. Set software breakpoint "(gdb) break sys_open". - -11. Continue "(gdb) c". Then enter Ctrl+C twice to stop GDB connection. - -12. Run ls in the target console "/> ls". Dummy string can be seen on the console. - -13. Then connect the gdb to target again. "(gdb) target remote /dev/ttyS0". - Now you will find a breakpoint is hit. "Breakpoint 1: sys_open(..." - -14. All other operations are the same as that in KGDB over Ethernet. The only - difference is that after continue command in GDB, please stop GDB - connection by 2 "Ctrl+C"s and connect again after breakpoints are hit or - Ctrl+A is entered. diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index 0afa8981872..2cb0a3080d7 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -2,6 +2,9 @@ menu "Kernel hacking" source "lib/Kconfig.debug" +config HAVE_ARCH_KGDB + def_bool y + config DEBUG_MMRS bool "Generate Blackfin MMR tree" select DEBUG_FS diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h index 0f73847fd6b..26ebac6646d 100644 --- a/arch/blackfin/include/asm/kgdb.h +++ b/arch/blackfin/include/asm/kgdb.h @@ -124,9 +124,16 @@ enum regnames { /* Number of bytes of registers. */ #define NUMREGBYTES BFIN_NUM_REGS*4 -#define BREAKPOINT() asm(" EXCPT 2;"); -#define BREAK_INSTR_SIZE 2 -#define HW_BREAKPOINT_NUM 6 +static inline void arch_kgdb_breakpoint(void) +{ + asm(" EXCPT 2;"); +} +#define BREAK_INSTR_SIZE 2 +#define CACHE_FLUSH_IS_SAFE 1 +#define HW_INST_WATCHPOINT_NUM 6 +#define HW_WATCHPOINT_NUM 8 +#define TYPE_INST_WATCHPOINT 0 +#define TYPE_DATA_WATCHPOINT 1 /* Instruction watchpoint address control register bits mask */ #define WPPWR 0x1 @@ -163,10 +170,11 @@ enum regnames { #define WPDAEN1 0x8 #define WPDCNTEN0 0x10 #define WPDCNTEN1 0x20 + #define WPDSRC0 0xc0 -#define WPDACC0 0x300 +#define WPDACC0_OFFSET 8 #define WPDSRC1 0xc00 -#define WPDACC1 0x3000 +#define WPDACC1_OFFSET 12 /* Watchpoint status register bits mask */ #define STATIA0 0x1 @@ -178,7 +186,4 @@ enum regnames { #define STATDA0 0x40 #define STATDA1 0x80 -extern void kgdb_print(const char *fmt, ...); -extern void init_kgdb_uart(void); - #endif diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index a1f9641a642..b795a207742 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -1,32 +1,9 @@ /* - * File: arch/blackfin/kernel/kgdb.c - * Based on: - * Author: Sonic Zhang + * arch/blackfin/kernel/kgdb.c - Blackfin kgdb pieces * - * Created: - * Description: + * Copyright 2005-2008 Analog Devices Inc. * - * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $ - * - * Modified: - * Copyright 2005-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include @@ -39,24 +16,29 @@ #include #include #include -#include #include #include +#include #include #include #include +#include /* Put the error code here just in case the user cares. */ -int gdb_bf533errcode; +int gdb_bfin_errcode; /* Likewise, the vector number here (since GDB only gets the signal number through the usual means, and that's not very specific). */ -int gdb_bf533vector = -1; +int gdb_bfin_vector = -1; #if KGDB_MAX_NO_CPUS != 8 #error change the definition of slavecpulocks #endif -void regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) +#ifdef CONFIG_BFIN_WDT +# error "Please unselect blackfin watchdog driver before build KGDB." +#endif + +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { gdb_regs[BFIN_R0] = regs->r0; gdb_regs[BFIN_R1] = regs->r1; @@ -133,7 +115,7 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) gdb_regs[BFIN_SEQSTAT] = p->thread.seqstat; } -void gdb_regs_to_regs(unsigned long *gdb_regs, struct pt_regs *regs) +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) { regs->r0 = gdb_regs[BFIN_R0]; regs->r1 = gdb_regs[BFIN_R1]; @@ -199,171 +181,208 @@ struct hw_breakpoint { unsigned int dataacc:2; unsigned short count; unsigned int addr; -} breakinfo[HW_BREAKPOINT_NUM]; +} breakinfo[HW_WATCHPOINT_NUM]; -int kgdb_arch_init(void) -{ - debugger_step = 0; - - kgdb_remove_all_hw_break(); - return 0; -} - -int kgdb_set_hw_break(unsigned long addr) +int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type) { int breakno; - for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++) - if (!breakinfo[breakno].occupied) { + int bfin_type; + int dataacc = 0; + + switch (type) { + case BP_HARDWARE_BREAKPOINT: + bfin_type = TYPE_INST_WATCHPOINT; + break; + case BP_WRITE_WATCHPOINT: + dataacc = 1; + bfin_type = TYPE_DATA_WATCHPOINT; + break; + case BP_READ_WATCHPOINT: + dataacc = 2; + bfin_type = TYPE_DATA_WATCHPOINT; + break; + case BP_ACCESS_WATCHPOINT: + dataacc = 3; + bfin_type = TYPE_DATA_WATCHPOINT; + break; + default: + return -ENOSPC; + } + + /* Becasue hardware data watchpoint impelemented in current + * Blackfin can not trigger an exception event as the hardware + * instrction watchpoint does, we ignaore all data watch point here. + * They can be turned on easily after future blackfin design + * supports this feature. + */ + for (breakno = 0; breakno < HW_INST_WATCHPOINT_NUM; breakno++) + if (bfin_type == breakinfo[breakno].type + && !breakinfo[breakno].occupied) { breakinfo[breakno].occupied = 1; breakinfo[breakno].enabled = 1; - breakinfo[breakno].type = 1; breakinfo[breakno].addr = addr; + breakinfo[breakno].dataacc = dataacc; + breakinfo[breakno].count = 0; return 0; } return -ENOSPC; } -int kgdb_remove_hw_break(unsigned long addr) +int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type) { int breakno; - for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++) - if (breakinfo[breakno].addr == addr) - memset(&(breakinfo[breakno]), 0, sizeof(struct hw_breakpoint)); + int bfin_type; + + switch (type) { + case BP_HARDWARE_BREAKPOINT: + bfin_type = TYPE_INST_WATCHPOINT; + break; + case BP_WRITE_WATCHPOINT: + case BP_READ_WATCHPOINT: + case BP_ACCESS_WATCHPOINT: + bfin_type = TYPE_DATA_WATCHPOINT; + break; + default: + return 0; + } + for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++) + if (bfin_type == breakinfo[breakno].type + && breakinfo[breakno].occupied + && breakinfo[breakno].addr == addr) { + breakinfo[breakno].occupied = 0; + breakinfo[breakno].enabled = 0; + } return 0; } -void kgdb_remove_all_hw_break(void) +void bfin_remove_all_hw_break(void) { - memset(breakinfo, 0, sizeof(struct hw_breakpoint)*8); -} + int breakno; -/* -void kgdb_show_info(void) -{ - printk(KERN_DEBUG "hwd: wpia0=0x%x, wpiacnt0=%d, wpiactl=0x%x, wpstat=0x%x\n", - bfin_read_WPIA0(), bfin_read_WPIACNT0(), - bfin_read_WPIACTL(), bfin_read_WPSTAT()); + memset(breakinfo, 0, sizeof(struct hw_breakpoint)*HW_WATCHPOINT_NUM); + + for (breakno = 0; breakno < HW_INST_WATCHPOINT_NUM; breakno++) + breakinfo[breakno].type = TYPE_INST_WATCHPOINT; + for (; breakno < HW_WATCHPOINT_NUM; breakno++) + breakinfo[breakno].type = TYPE_DATA_WATCHPOINT; } -*/ -void kgdb_correct_hw_break(void) +void bfin_correct_hw_break(void) { int breakno; - int correctit; - uint32_t wpdactl = bfin_read_WPDACTL(); + unsigned int wpiactl = 0; + unsigned int wpdactl = 0; + int enable_wp = 0; + + for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++) + if (breakinfo[breakno].enabled) { + enable_wp = 1; - correctit = 0; - for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++) { - if (breakinfo[breakno].type == 1) { switch (breakno) { case 0: - if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN0)) { - correctit = 1; - wpdactl &= ~(WPIREN01|EMUSW0); - wpdactl |= WPIAEN0|WPICNTEN0; - bfin_write_WPIA0(breakinfo[breakno].addr); - bfin_write_WPIACNT0(breakinfo[breakno].skip); - } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN0)) { - correctit = 1; - wpdactl &= ~WPIAEN0; - } + wpiactl |= WPIAEN0|WPICNTEN0; + bfin_write_WPIA0(breakinfo[breakno].addr); + bfin_write_WPIACNT0(breakinfo[breakno].count + + breakinfo->skip); break; - case 1: - if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN1)) { - correctit = 1; - wpdactl &= ~(WPIREN01|EMUSW1); - wpdactl |= WPIAEN1|WPICNTEN1; - bfin_write_WPIA1(breakinfo[breakno].addr); - bfin_write_WPIACNT1(breakinfo[breakno].skip); - } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN1)) { - correctit = 1; - wpdactl &= ~WPIAEN1; - } + wpiactl |= WPIAEN1|WPICNTEN1; + bfin_write_WPIA1(breakinfo[breakno].addr); + bfin_write_WPIACNT1(breakinfo[breakno].count + + breakinfo->skip); break; - case 2: - if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN2)) { - correctit = 1; - wpdactl &= ~(WPIREN23|EMUSW2); - wpdactl |= WPIAEN2|WPICNTEN2; - bfin_write_WPIA2(breakinfo[breakno].addr); - bfin_write_WPIACNT2(breakinfo[breakno].skip); - } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN2)) { - correctit = 1; - wpdactl &= ~WPIAEN2; - } + wpiactl |= WPIAEN2|WPICNTEN2; + bfin_write_WPIA2(breakinfo[breakno].addr); + bfin_write_WPIACNT2(breakinfo[breakno].count + + breakinfo->skip); break; - case 3: - if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN3)) { - correctit = 1; - wpdactl &= ~(WPIREN23|EMUSW3); - wpdactl |= WPIAEN3|WPICNTEN3; - bfin_write_WPIA3(breakinfo[breakno].addr); - bfin_write_WPIACNT3(breakinfo[breakno].skip); - } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN3)) { - correctit = 1; - wpdactl &= ~WPIAEN3; - } + wpiactl |= WPIAEN3|WPICNTEN3; + bfin_write_WPIA3(breakinfo[breakno].addr); + bfin_write_WPIACNT3(breakinfo[breakno].count + + breakinfo->skip); break; case 4: - if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN4)) { - correctit = 1; - wpdactl &= ~(WPIREN45|EMUSW4); - wpdactl |= WPIAEN4|WPICNTEN4; - bfin_write_WPIA4(breakinfo[breakno].addr); - bfin_write_WPIACNT4(breakinfo[breakno].skip); - } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN4)) { - correctit = 1; - wpdactl &= ~WPIAEN4; - } + wpiactl |= WPIAEN4|WPICNTEN4; + bfin_write_WPIA4(breakinfo[breakno].addr); + bfin_write_WPIACNT4(breakinfo[breakno].count + + breakinfo->skip); break; case 5: - if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN5)) { - correctit = 1; - wpdactl &= ~(WPIREN45|EMUSW5); - wpdactl |= WPIAEN5|WPICNTEN5; - bfin_write_WPIA5(breakinfo[breakno].addr); - bfin_write_WPIACNT5(breakinfo[breakno].skip); - } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN5)) { - correctit = 1; - wpdactl &= ~WPIAEN5; - } + wpiactl |= WPIAEN5|WPICNTEN5; + bfin_write_WPIA5(breakinfo[breakno].addr); + bfin_write_WPIACNT5(breakinfo[breakno].count + + breakinfo->skip); + break; + case 6: + wpdactl |= WPDAEN0|WPDCNTEN0|WPDSRC0; + wpdactl |= breakinfo[breakno].dataacc + << WPDACC0_OFFSET; + bfin_write_WPDA0(breakinfo[breakno].addr); + bfin_write_WPDACNT0(breakinfo[breakno].count + + breakinfo->skip); + break; + case 7: + wpdactl |= WPDAEN1|WPDCNTEN1|WPDSRC1; + wpdactl |= breakinfo[breakno].dataacc + << WPDACC1_OFFSET; + bfin_write_WPDA1(breakinfo[breakno].addr); + bfin_write_WPDACNT1(breakinfo[breakno].count + + breakinfo->skip); break; } } - } - if (correctit) { - wpdactl &= ~WPAND; - wpdactl |= WPPWR; - /*printk("correct_hw_break: wpdactl=0x%x\n", wpdactl);*/ + + /* Should enable WPPWR bit first before set any other + * WPIACTL and WPDACTL bits */ + if (enable_wp) { + bfin_write_WPIACTL(WPPWR); + CSYNC(); + bfin_write_WPIACTL(wpiactl|WPPWR); bfin_write_WPDACTL(wpdactl); CSYNC(); - /*kgdb_show_info();*/ } } void kgdb_disable_hw_debug(struct pt_regs *regs) { /* Disable hardware debugging while we are in kgdb */ - bfin_write_WPIACTL(bfin_read_WPIACTL() & ~0x1); + bfin_write_WPIACTL(0); + bfin_write_WPDACTL(0); CSYNC(); } -void kgdb_post_master_code(struct pt_regs *regs, int eVector, int err_code) +#ifdef CONFIG_SMP +void kgdb_passive_cpu_callback(void *info) +{ + kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs()); +} + +void kgdb_roundup_cpus(unsigned long flags) +{ + smp_call_function(kgdb_passive_cpu_callback, NULL, 0, 0); +} + +void kgdb_roundup_cpu(int cpu, unsigned long flags) +{ + smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0, 0); +} +#endif + +void kgdb_post_primary_code(struct pt_regs *regs, int eVector, int err_code) { /* Master processor is completely in the debugger */ - gdb_bf533vector = eVector; - gdb_bf533errcode = err_code; + gdb_bfin_vector = eVector; + gdb_bfin_errcode = err_code; } -int kgdb_arch_handle_exception(int exceptionVector, int signo, +int kgdb_arch_handle_exception(int vector, int signo, int err_code, char *remcom_in_buffer, char *remcom_out_buffer, - struct pt_regs *linux_regs) + struct pt_regs *regs) { long addr; long breakno; @@ -385,44 +404,40 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo, /* try to read optional parameter, pc unchanged if no parm */ ptr = &remcom_in_buffer[1]; if (kgdb_hex2long(&ptr, &addr)) { - linux_regs->retx = addr; + regs->retx = addr; } - newPC = linux_regs->retx; + newPC = regs->retx; /* clear the trace bit */ - linux_regs->syscfg &= 0xfffffffe; + regs->syscfg &= 0xfffffffe; /* set the trace bit if we're stepping */ if (remcom_in_buffer[0] == 's') { - linux_regs->syscfg |= 0x1; - debugger_step = linux_regs->ipend; - debugger_step >>= 6; - for (i = 10; i > 0; i--, debugger_step >>= 1) - if (debugger_step & 1) + regs->syscfg |= 0x1; + kgdb_single_step = regs->ipend; + kgdb_single_step >>= 6; + for (i = 10; i > 0; i--, kgdb_single_step >>= 1) + if (kgdb_single_step & 1) break; /* i indicate event priority of current stopped instruction * user space instruction is 0, IVG15 is 1, IVTMR is 10. - * debugger_step > 0 means in single step mode + * kgdb_single_step > 0 means in single step mode */ - debugger_step = i + 1; - } else { - debugger_step = 0; + kgdb_single_step = i + 1; } - wp_status = bfin_read_WPSTAT(); - CSYNC(); - - if (exceptionVector == VEC_WATCH) { - for (breakno = 0; breakno < 6; ++breakno) { + if (vector == VEC_WATCH) { + wp_status = bfin_read_WPSTAT(); + for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++) { if (wp_status & (1 << breakno)) { breakinfo->skip = 1; break; } } + bfin_write_WPSTAT(0); } - kgdb_correct_hw_break(); - bfin_write_WPSTAT(0); + bfin_correct_hw_break(); return 0; } /* switch */ @@ -431,5 +446,385 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo, struct kgdb_arch arch_kgdb_ops = { .gdb_bpt_instr = {0xa1}, +#ifdef CONFIG_SMP + .flags = KGDB_HW_BREAKPOINT|KGDB_THR_PROC_SWAP, +#else .flags = KGDB_HW_BREAKPOINT, +#endif + .set_hw_breakpoint = bfin_set_hw_break, + .remove_hw_breakpoint = bfin_remove_hw_break, + .remove_all_hw_break = bfin_remove_all_hw_break, + .correct_hw_break = bfin_correct_hw_break, }; + +static int hex(char ch) +{ + if ((ch >= 'a') && (ch <= 'f')) + return ch - 'a' + 10; + if ((ch >= '0') && (ch <= '9')) + return ch - '0'; + if ((ch >= 'A') && (ch <= 'F')) + return ch - 'A' + 10; + return -1; +} + +static int validate_memory_access_address(unsigned long addr, int size) +{ + int cpu = raw_smp_processor_id(); + + if (size < 0) + return EFAULT; + if (addr >= 0x1000 && (addr + size) <= physical_mem_end) + return 0; + if (addr >= SYSMMR_BASE) + return 0; + if (addr >= ASYNC_BANK0_BASE + && addr + size <= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) + return 0; + if (cpu == 0) { + if (addr >= L1_SCRATCH_START + && (addr + size <= L1_SCRATCH_START + L1_SCRATCH_LENGTH)) + return 0; +#if L1_CODE_LENGTH != 0 + if (addr >= L1_CODE_START + && (addr + size <= L1_CODE_START + L1_CODE_LENGTH)) + return 0; +#endif +#if L1_DATA_A_LENGTH != 0 + if (addr >= L1_DATA_A_START + && (addr + size <= L1_DATA_A_START + L1_DATA_A_LENGTH)) + return 0; +#endif +#if L1_DATA_B_LENGTH != 0 + if (addr >= L1_DATA_B_START + && (addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH)) + return 0; +#endif +#ifdef CONFIG_SMP + } else if (cpu == 1) { + if (addr >= COREB_L1_SCRATCH_START + && (addr + size <= COREB_L1_SCRATCH_START + + L1_SCRATCH_LENGTH)) + return 0; +# if L1_CODE_LENGTH != 0 + if (addr >= COREB_L1_CODE_START + && (addr + size <= COREB_L1_CODE_START + L1_CODE_LENGTH)) + return 0; +# endif +# if L1_DATA_A_LENGTH != 0 + if (addr >= COREB_L1_DATA_A_START + && (addr + size <= COREB_L1_DATA_A_START + L1_DATA_A_LENGTH)) + return 0; +# endif +# if L1_DATA_B_LENGTH != 0 + if (addr >= COREB_L1_DATA_B_START + && (addr + size <= COREB_L1_DATA_B_START + L1_DATA_B_LENGTH)) + return 0; +# endif +#endif + } + +#if L2_LENGTH != 0 + if (addr >= L2_START + && addr + size <= L2_START + L2_LENGTH) + return 0; +#endif + + return EFAULT; +} + +/* + * Convert the memory pointed to by mem into hex, placing result in buf. + * Return a pointer to the last char put in buf (null). May return an error. + */ +int kgdb_mem2hex(char *mem, char *buf, int count) +{ + char *tmp; + int err = 0; + unsigned char *pch; + unsigned short mmr16; + unsigned long mmr32; + int cpu = raw_smp_processor_id(); + + if (validate_memory_access_address((unsigned long)mem, count)) + return EFAULT; + + /* + * We use the upper half of buf as an intermediate buffer for the + * raw memory copy. Hex conversion will work against this one. + */ + tmp = buf + count; + + if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/ + switch (count) { + case 2: + if ((unsigned int)mem % 2 == 0) { + mmr16 = *(unsigned short *)mem; + pch = (unsigned char *)&mmr16; + *tmp++ = *pch++; + *tmp++ = *pch++; + tmp -= 2; + } else + err = EFAULT; + break; + case 4: + if ((unsigned int)mem % 4 == 0) { + mmr32 = *(unsigned long *)mem; + pch = (unsigned char *)&mmr32; + *tmp++ = *pch++; + *tmp++ = *pch++; + *tmp++ = *pch++; + *tmp++ = *pch++; + tmp -= 4; + } else + err = EFAULT; + break; + default: + err = EFAULT; + } + } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START && + (unsigned int)(mem + count) <= L1_CODE_START + L1_CODE_LENGTH +#ifdef CONFIG_SMP + || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START && + (unsigned int)(mem + count) <= + COREB_L1_CODE_START + L1_CODE_LENGTH +#endif + ) { + /* access L1 instruction SRAM*/ + if (dma_memcpy(tmp, mem, count) == NULL) + err = EFAULT; + } else + err = probe_kernel_read(tmp, mem, count); + + if (!err) { + while (count > 0) { + buf = pack_hex_byte(buf, *tmp); + tmp++; + count--; + } + + *buf = 0; + } + + return err; +} + +/* + * Copy the binary array pointed to by buf into mem. Fix $, #, and + * 0x7d escaped with 0x7d. Return a pointer to the character after + * the last byte written. + */ +int kgdb_ebin2mem(char *buf, char *mem, int count) +{ + char *tmp_old; + char *tmp_new; + unsigned short *mmr16; + unsigned long *mmr32; + int err = 0; + int size = 0; + int cpu = raw_smp_processor_id(); + + tmp_old = tmp_new = buf; + + while (count-- > 0) { + if (*tmp_old == 0x7d) + *tmp_new = *(++tmp_old) ^ 0x20; + else + *tmp_new = *tmp_old; + tmp_new++; + tmp_old++; + size++; + } + + if (validate_memory_access_address((unsigned long)mem, size)) + return EFAULT; + + if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/ + switch (size) { + case 2: + if ((unsigned int)mem % 2 == 0) { + mmr16 = (unsigned short *)buf; + *(unsigned short *)mem = *mmr16; + } else + return EFAULT; + break; + case 4: + if ((unsigned int)mem % 4 == 0) { + mmr32 = (unsigned long *)buf; + *(unsigned long *)mem = *mmr32; + } else + return EFAULT; + break; + default: + return EFAULT; + } + } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START && + (unsigned int)(mem + count) < L1_CODE_START + L1_CODE_LENGTH +#ifdef CONFIG_SMP + || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START && + (unsigned int)(mem + count) <= + COREB_L1_CODE_START + L1_CODE_LENGTH +#endif + ) { + /* access L1 instruction SRAM */ + if (dma_memcpy(mem, buf, size) == NULL) + err = EFAULT; + } else + err = probe_kernel_write(mem, buf, size); + + return err; +} + +/* + * Convert the hex array pointed to by buf into binary to be placed in mem. + * Return a pointer to the character AFTER the last byte written. + * May return an error. + */ +int kgdb_hex2mem(char *buf, char *mem, int count) +{ + char *tmp_raw; + char *tmp_hex; + unsigned short *mmr16; + unsigned long *mmr32; + int cpu = raw_smp_processor_id(); + + if (validate_memory_access_address((unsigned long)mem, count)) + return EFAULT; + + /* + * We use the upper half of buf as an intermediate buffer for the + * raw memory that is converted from hex. + */ + tmp_raw = buf + count * 2; + + tmp_hex = tmp_raw - 1; + while (tmp_hex >= buf) { + tmp_raw--; + *tmp_raw = hex(*tmp_hex--); + *tmp_raw |= hex(*tmp_hex--) << 4; + } + + if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/ + switch (count) { + case 2: + if ((unsigned int)mem % 2 == 0) { + mmr16 = (unsigned short *)tmp_raw; + *(unsigned short *)mem = *mmr16; + } else + return EFAULT; + break; + case 4: + if ((unsigned int)mem % 4 == 0) { + mmr32 = (unsigned long *)tmp_raw; + *(unsigned long *)mem = *mmr32; + } else + return EFAULT; + break; + default: + return EFAULT; + } + } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START && + (unsigned int)(mem + count) <= L1_CODE_START + L1_CODE_LENGTH +#ifdef CONFIG_SMP + || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START && + (unsigned int)(mem + count) <= + COREB_L1_CODE_START + L1_CODE_LENGTH +#endif + ) { + /* access L1 instruction SRAM */ + if (dma_memcpy(mem, tmp_raw, count) == NULL) + return EFAULT; + } else + return probe_kernel_write(mem, tmp_raw, count); + return 0; +} + +int kgdb_validate_break_address(unsigned long addr) +{ + int cpu = raw_smp_processor_id(); + + if (addr >= 0x1000 && (addr + BREAK_INSTR_SIZE) <= physical_mem_end) + return 0; + if (addr >= ASYNC_BANK0_BASE + && addr + BREAK_INSTR_SIZE <= ASYNC_BANK3_BASE + ASYNC_BANK3_BASE) + return 0; +#if L1_CODE_LENGTH != 0 + if (cpu == 0 && addr >= L1_CODE_START + && addr + BREAK_INSTR_SIZE <= L1_CODE_START + L1_CODE_LENGTH) + return 0; +# ifdef CONFIG_SMP + else if (cpu == 1 && addr >= COREB_L1_CODE_START + && addr + BREAK_INSTR_SIZE <= COREB_L1_CODE_START + L1_CODE_LENGTH) + return 0; +# endif +#endif +#if L2_LENGTH != 0 + if (addr >= L2_START + && addr + BREAK_INSTR_SIZE <= L2_START + L2_LENGTH) + return 0; +#endif + + return EFAULT; +} + +int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) +{ + int err; + int cpu = raw_smp_processor_id(); + + if ((cpu == 0 && (unsigned int)addr >= L1_CODE_START + && (unsigned int)(addr + BREAK_INSTR_SIZE) + < L1_CODE_START + L1_CODE_LENGTH) +#ifdef CONFIG_SMP + || (cpu == 1 && (unsigned int)addr >= COREB_L1_CODE_START + && (unsigned int)(addr + BREAK_INSTR_SIZE) + < COREB_L1_CODE_START + L1_CODE_LENGTH) +#endif + ) { + /* access L1 instruction SRAM */ + if (dma_memcpy(saved_instr, (void *)addr, BREAK_INSTR_SIZE) + == NULL) + return -EFAULT; + + if (dma_memcpy((void *)addr, arch_kgdb_ops.gdb_bpt_instr, + BREAK_INSTR_SIZE) == NULL) + return -EFAULT; + + return 0; + } else { + err = probe_kernel_read(saved_instr, (char *)addr, + BREAK_INSTR_SIZE); + if (err) + return err; + + return probe_kernel_write((char *)addr, + arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE); + } +} + +int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) +{ + if ((unsigned int)addr >= L1_CODE_START && + (unsigned int)(addr + BREAK_INSTR_SIZE) < + L1_CODE_START + L1_CODE_LENGTH) { + /* access L1 instruction SRAM */ + if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL) + return -EFAULT; + + return 0; + } else + return probe_kernel_write((char *)addr, + (char *)bundle, BREAK_INSTR_SIZE); +} + +int kgdb_arch_init(void) +{ + kgdb_single_step = 0; + + bfin_remove_all_hw_break(); + return 0; +} + +void kgdb_arch_exit(void) +{ +} diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index bd41fca315d..8d561baef89 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -43,12 +43,11 @@ #include #ifdef CONFIG_KGDB -# include # include # define CHK_DEBUGGER_TRAP() \ do { \ - CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \ + kgdb_handle_exception(trapnr, sig, info.si_code, fp); \ } while (0) # define CHK_DEBUGGER_TRAP_MAYBE() \ do { \ @@ -300,7 +299,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = SEGV_STACKFLOW; sig = SIGSEGV; printk(KERN_NOTICE EXC_0x03(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x04 - User Defined, Caught by default */ /* 0x05 - User Defined, Caught by default */ @@ -329,7 +328,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = TRAP_TRACEFLOW; sig = SIGTRAP; printk(KERN_NOTICE EXC_0x11(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x12 - Reserved, Caught by default */ /* 0x13 - Reserved, Caught by default */ @@ -351,35 +350,35 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = ILL_ILLOPC; sig = SIGILL; printk(KERN_NOTICE EXC_0x21(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x22 - Illegal Instruction Combination, handled here */ case VEC_ILGAL_I: info.si_code = ILL_ILLPARAOP; sig = SIGILL; printk(KERN_NOTICE EXC_0x22(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x23 - Data CPLB protection violation, handled here */ case VEC_CPLB_VL: info.si_code = ILL_CPLB_VI; sig = SIGBUS; printk(KERN_NOTICE EXC_0x23(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x24 - Data access misaligned, handled here */ case VEC_MISALI_D: info.si_code = BUS_ADRALN; sig = SIGBUS; printk(KERN_NOTICE EXC_0x24(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x25 - Unrecoverable Event, handled here */ case VEC_UNCOV: info.si_code = ILL_ILLEXCPT; sig = SIGILL; printk(KERN_NOTICE EXC_0x25(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr, error case is handled here */ @@ -387,7 +386,6 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = BUS_ADRALN; sig = SIGBUS; printk(KERN_NOTICE EXC_0x26(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); break; /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */ case VEC_CPLB_MHIT: @@ -399,7 +397,7 @@ asmlinkage void trap_c(struct pt_regs *fp) else #endif printk(KERN_NOTICE EXC_0x27(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x28 - Emulation Watchpoint, handled here */ case VEC_WATCH: @@ -418,7 +416,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = BUS_OPFETCH; sig = SIGBUS; printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n"); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; #else /* 0x29 - Reserved, Caught by default */ @@ -428,21 +426,20 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = BUS_ADRALN; sig = SIGBUS; printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x2B - Instruction CPLB protection violation, handled here */ case VEC_CPLB_I_VL: info.si_code = ILL_CPLB_VI; sig = SIGBUS; printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */ case VEC_CPLB_I_M: info.si_code = ILL_CPLB_MISS; sig = SIGBUS; printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); break; /* 0x2D - Instruction CPLB Multiple Hits, handled here */ case VEC_CPLB_I_MHIT: @@ -454,14 +451,14 @@ asmlinkage void trap_c(struct pt_regs *fp) else #endif printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x2E - Illegal use of Supervisor Resource, handled here */ case VEC_ILL_RES: info.si_code = ILL_PRVOPC; sig = SIGILL; printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x2F - Reserved, Caught by default */ /* 0x30 - Reserved, Caught by default */ @@ -508,14 +505,14 @@ asmlinkage void trap_c(struct pt_regs *fp) printk(KERN_NOTICE HWC_default(KERN_NOTICE)); break; } - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; default: info.si_code = TRAP_ILLTRAP; sig = SIGTRAP; printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n", (fp->seqstat & SEQSTAT_EXCAUSE)); - CHK_DEBUGGER_TRAP(); + CHK_DEBUGGER_TRAP_MAYBE(); break; } diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h index c26d8486cc4..9d6674ad1e5 100644 --- a/arch/blackfin/mach-bf561/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h @@ -35,9 +35,16 @@ /* Memory Map for ADSP-BF561 processors */ #ifdef CONFIG_BF561 -#define L1_CODE_START 0xFFA00000 -#define L1_DATA_A_START 0xFF800000 -#define L1_DATA_B_START 0xFF900000 +#define COREA_L1_CODE_START 0xFFA00000 +#define COREA_L1_DATA_A_START 0xFF800000 +#define COREA_L1_DATA_B_START 0xFF900000 +#define COREB_L1_CODE_START 0xFF600000 +#define COREB_L1_DATA_A_START 0xFF500000 +#define COREB_L1_DATA_B_START 0xFF400000 + +#define L1_CODE_START COREA_L1_CODE_START +#define L1_DATA_A_START COREA_L1_DATA_A_START +#define L1_DATA_B_START COREA_L1_DATA_B_START #define L1_CODE_LENGTH 0x4000 @@ -72,7 +79,10 @@ /* Scratch Pad Memory */ -#define L1_SCRATCH_START 0xFFB00000 +#define COREA_L1_SCRATCH_START 0xFFB00000 +#define COREB_L1_SCRATCH_START 0xFF700000 + +#define L1_SCRATCH_START COREA_L1_SCRATCH_START #define L1_SCRATCH_LENGTH 0x1000 #endif /* _MEM_MAP_533_H_ */ diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 90c7397036e..5a219b228de 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -190,8 +190,8 @@ ENTRY(_ex_single_step) if cc jump .Lfind_priority_done; jump.s .Lfind_priority_start; .Lfind_priority_done: - p4.l = _debugger_step; - p4.h = _debugger_step; + p4.l = _kgdb_single_step; + p4.h = _kgdb_single_step; r6 = [p4]; cc = r6 == 0; if cc jump .Ldo_single_step; @@ -1071,7 +1071,12 @@ ENTRY(_ex_table) */ .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */ .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */ +#ifdef CONFIG_KGDB + .long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection + and break signal trap */ +#else .long _ex_replaceable /* 0x02 - User Defined */ +#endif .long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */ .long _ex_trap_c /* 0x04 - User Defined - dump trace buffer */ .long _ex_replaceable /* 0x05 - User Defined */ diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 5fa536727c6..ff4d5c2879a 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -1136,8 +1136,4 @@ void do_irq(int vec, struct pt_regs *fp) vec = ivg->irqno; } asm_do_IRQ(vec, fp); - -#ifdef CONFIG_KGDB - kgdb_process_breakpoint(); -#endif } -- cgit v1.2.3-70-g09d2 From 079aa88fe7172b7650c7cf2c0bc01662bafea236 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Wed, 8 Oct 2008 11:35:00 +0200 Subject: netfilter: xt_recent: IPv6 support This updates xt_recent to support the IPv6 address family. The new /proc/net/xt_recent directory must be used for this. The old proc interface can also be configured out. Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy --- Documentation/feature-removal-schedule.txt | 3 + net/netfilter/Kconfig | 7 + net/netfilter/xt_recent.c | 300 +++++++++++++++++++++++------ 3 files changed, 256 insertions(+), 54 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index d0f22fac55d..3d2d0c29f02 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -250,6 +250,9 @@ What (Why): - xt_mark match revision 0 (superseded by xt_mark match revision 1) + - xt_recent: the old ipt_recent proc dir + (superseded by /proc/net/xt_recent) + When: January 2009 or Linux 2.7.0, whichever comes first Why: Superseded by newer revisions or modules Who: Jan Engelhardt diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index ccc78b07a1a..4a464857f21 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -743,6 +743,13 @@ config NETFILTER_XT_MATCH_RECENT Short options are available by using 'iptables -m recent -h' Official Website: +config NETFILTER_XT_MATCH_RECENT_PROC_COMPAT + bool 'Enable obsolete /proc/net/ipt_recent' + depends on NETFILTER_XT_MATCH_RECENT && PROC_FS + ---help--- + This option enables the old /proc/net/ipt_recent interface, + which has been obsoleted by /proc/net/xt_recent. + config NETFILTER_XT_MATCH_SCTP tristate '"sctp" protocol match support (EXPERIMENTAL)' depends on NETFILTER_XTABLES && EXPERIMENTAL diff --git a/net/netfilter/xt_recent.c b/net/netfilter/xt_recent.c index 422c0e4d66b..adc2e2f1b09 100644 --- a/net/netfilter/xt_recent.c +++ b/net/netfilter/xt_recent.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2006 Patrick McHardy + * Copyright © CC Computer Consultants GmbH, 2007 - 2008 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,6 +14,8 @@ */ #include #include +#include +#include #include #include #include @@ -30,9 +33,11 @@ #include MODULE_AUTHOR("Patrick McHardy "); +MODULE_AUTHOR("Jan Engelhardt "); MODULE_DESCRIPTION("Xtables: \"recently-seen\" host matching for IPv4"); MODULE_LICENSE("GPL"); MODULE_ALIAS("ipt_recent"); +MODULE_ALIAS("ip6t_recent"); static unsigned int ip_list_tot = 100; static unsigned int ip_pkt_list_tot = 20; @@ -49,14 +54,15 @@ module_param(ip_list_gid, uint, 0400); MODULE_PARM_DESC(ip_list_tot, "number of IPs to remember per list"); MODULE_PARM_DESC(ip_pkt_list_tot, "number of packets per IP to remember (max. 255)"); MODULE_PARM_DESC(ip_list_hash_size, "size of hash table used to look up IPs"); -MODULE_PARM_DESC(ip_list_perms, "permissions on /proc/net/ipt_recent/* files"); -MODULE_PARM_DESC(ip_list_uid,"owner of /proc/net/ipt_recent/* files"); -MODULE_PARM_DESC(ip_list_gid,"owning group of /proc/net/ipt_recent/* files"); +MODULE_PARM_DESC(ip_list_perms, "permissions on /proc/net/xt_recent/* files"); +MODULE_PARM_DESC(ip_list_uid,"owner of /proc/net/xt_recent/* files"); +MODULE_PARM_DESC(ip_list_gid,"owning group of /proc/net/xt_recent/* files"); struct recent_entry { struct list_head list; struct list_head lru_list; - __be32 addr; + union nf_inet_addr addr; + u_int16_t family; u_int8_t ttl; u_int8_t index; u_int16_t nstamps; @@ -67,7 +73,7 @@ struct recent_table { struct list_head list; char name[XT_RECENT_NAME_LEN]; #ifdef CONFIG_PROC_FS - struct proc_dir_entry *proc; + struct proc_dir_entry *proc_old, *proc; #endif unsigned int refcnt; unsigned int entries; @@ -80,31 +86,53 @@ static DEFINE_SPINLOCK(recent_lock); static DEFINE_MUTEX(recent_mutex); #ifdef CONFIG_PROC_FS -static struct proc_dir_entry *proc_dir; -static const struct file_operations recent_fops; +#ifdef CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT +static struct proc_dir_entry *proc_old_dir; +#endif +static struct proc_dir_entry *recent_proc_dir; +static const struct file_operations recent_old_fops, recent_mt_fops; #endif static u_int32_t hash_rnd; -static int hash_rnd_initted; +static bool hash_rnd_initted; + +static unsigned int recent_entry_hash4(const union nf_inet_addr *addr) +{ + if (!hash_rnd_initted) { + get_random_bytes(&hash_rnd, sizeof(hash_rnd)); + hash_rnd_initted = true; + } + return jhash_1word((__force u32)addr->ip, hash_rnd) & + (ip_list_hash_size - 1); +} -static unsigned int recent_entry_hash(__be32 addr) +static unsigned int recent_entry_hash6(const union nf_inet_addr *addr) { if (!hash_rnd_initted) { - get_random_bytes(&hash_rnd, 4); - hash_rnd_initted = 1; + get_random_bytes(&hash_rnd, sizeof(hash_rnd)); + hash_rnd_initted = true; } - return jhash_1word((__force u32)addr, hash_rnd) & (ip_list_hash_size - 1); + return jhash2((u32 *)addr->ip6, ARRAY_SIZE(addr->ip6), hash_rnd) & + (ip_list_hash_size - 1); } static struct recent_entry * -recent_entry_lookup(const struct recent_table *table, __be32 addr, u_int8_t ttl) +recent_entry_lookup(const struct recent_table *table, + const union nf_inet_addr *addrp, u_int16_t family, + u_int8_t ttl) { struct recent_entry *e; unsigned int h; - h = recent_entry_hash(addr); + if (family == AF_INET) + h = recent_entry_hash4(addrp); + else + h = recent_entry_hash6(addrp); + list_for_each_entry(e, &table->iphash[h], list) - if (e->addr == addr && (ttl == e->ttl || !ttl || !e->ttl)) + if (e->family == family && + memcmp(&e->addr, addrp, sizeof(e->addr)) == 0 && + (ttl == e->ttl || ttl == 0 || e->ttl == 0)) return e; return NULL; } @@ -118,7 +146,8 @@ static void recent_entry_remove(struct recent_table *t, struct recent_entry *e) } static struct recent_entry * -recent_entry_init(struct recent_table *t, __be32 addr, u_int8_t ttl) +recent_entry_init(struct recent_table *t, const union nf_inet_addr *addr, + u_int16_t family, u_int8_t ttl) { struct recent_entry *e; @@ -130,12 +159,16 @@ recent_entry_init(struct recent_table *t, __be32 addr, u_int8_t ttl) GFP_ATOMIC); if (e == NULL) return NULL; - e->addr = addr; + memcpy(&e->addr, addr, sizeof(e->addr)); e->ttl = ttl; e->stamps[0] = jiffies; e->nstamps = 1; e->index = 1; - list_add_tail(&e->list, &t->iphash[recent_entry_hash(addr)]); + e->family = family; + if (family == AF_INET) + list_add_tail(&e->list, &t->iphash[recent_entry_hash4(addr)]); + else + list_add_tail(&e->list, &t->iphash[recent_entry_hash6(addr)]); list_add_tail(&e->lru_list, &t->lru_list); t->entries++; return e; @@ -179,28 +212,42 @@ recent_mt(const struct sk_buff *skb, const struct net_device *in, const struct xt_recent_mtinfo *info = matchinfo; struct recent_table *t; struct recent_entry *e; - __be32 addr; + union nf_inet_addr addr = {}; u_int8_t ttl; bool ret = info->invert; - if (info->side == XT_RECENT_DEST) - addr = ip_hdr(skb)->daddr; - else - addr = ip_hdr(skb)->saddr; + if (match->family == AF_INET) { + const struct iphdr *iph = ip_hdr(skb); + + if (info->side == XT_RECENT_DEST) + addr.ip = iph->daddr; + else + addr.ip = iph->saddr; + + ttl = iph->ttl; + } else { + const struct ipv6hdr *iph = ipv6_hdr(skb); + + if (info->side == XT_RECENT_DEST) + memcpy(&addr.in6, &iph->daddr, sizeof(addr.in6)); + else + memcpy(&addr.in6, &iph->saddr, sizeof(addr.in6)); + + ttl = iph->hop_limit; + } - ttl = ip_hdr(skb)->ttl; /* use TTL as seen before forwarding */ if (out && !skb->sk) ttl++; spin_lock_bh(&recent_lock); t = recent_table_lookup(info->name); - e = recent_entry_lookup(t, addr, - info->check_set & XT_RECENT_TTL ? ttl : 0); + e = recent_entry_lookup(t, &addr, match->family, + (info->check_set & XT_RECENT_TTL) ? ttl : 0); if (e == NULL) { if (!(info->check_set & XT_RECENT_SET)) goto out; - e = recent_entry_init(t, addr, ttl); + e = recent_entry_init(t, &addr, match->family, ttl); if (e == NULL) *hotdrop = true; ret = !ret; @@ -277,11 +324,24 @@ recent_mt_check(const char *tablename, const void *ip, for (i = 0; i < ip_list_hash_size; i++) INIT_LIST_HEAD(&t->iphash[i]); #ifdef CONFIG_PROC_FS - t->proc = proc_create(t->name, ip_list_perms, proc_dir, &recent_fops); + t->proc = proc_create(t->name, ip_list_perms, recent_proc_dir, + &recent_mt_fops); if (t->proc == NULL) { kfree(t); goto out; } +#ifdef CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT + t->proc_old = proc_create(t->name, ip_list_perms, proc_old_dir, + &recent_old_fops); + if (t->proc_old == NULL) { + remove_proc_entry(t->name, proc_old_dir); + kfree(t); + goto out; + } + t->proc_old->uid = ip_list_uid; + t->proc_old->gid = ip_list_gid; + t->proc_old->data = t; +#endif t->proc->uid = ip_list_uid; t->proc->gid = ip_list_gid; t->proc->data = t; @@ -307,7 +367,10 @@ static void recent_mt_destroy(const struct xt_match *match, void *matchinfo) list_del(&t->list); spin_unlock_bh(&recent_lock); #ifdef CONFIG_PROC_FS - remove_proc_entry(t->name, proc_dir); +#ifdef CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT + remove_proc_entry(t->name, proc_old_dir); +#endif + remove_proc_entry(t->name, recent_proc_dir); #endif recent_table_flush(t); kfree(t); @@ -317,7 +380,7 @@ static void recent_mt_destroy(const struct xt_match *match, void *matchinfo) #ifdef CONFIG_PROC_FS struct recent_iter_state { - struct recent_table *table; + const struct recent_table *table; unsigned int bucket; }; @@ -342,8 +405,8 @@ static void *recent_seq_next(struct seq_file *seq, void *v, loff_t *pos) { struct recent_iter_state *st = seq->private; const struct recent_table *t = st->table; - struct recent_entry *e = v; - struct list_head *head = e->list.next; + const struct recent_entry *e = v; + const struct list_head *head = e->list.next; while (head == &t->iphash[st->bucket]) { if (++st->bucket >= ip_list_hash_size) @@ -366,8 +429,14 @@ static int recent_seq_show(struct seq_file *seq, void *v) unsigned int i; i = (e->index - 1) % ip_pkt_list_tot; - seq_printf(seq, "src=%u.%u.%u.%u ttl: %u last_seen: %lu oldest_pkt: %u", - NIPQUAD(e->addr), e->ttl, e->stamps[i], e->index); + if (e->family == AF_INET) + seq_printf(seq, "src=" NIPQUAD_FMT " ttl: %u last_seen: %lu " + "oldest_pkt: %u", NIPQUAD(e->addr.ip), e->ttl, + e->stamps[i], e->index); + else + seq_printf(seq, "src=" NIP6_FMT " ttl: %u last_seen: %lu " + "oldest_pkt: %u", NIP6(e->addr.in6), e->ttl, + e->stamps[i], e->index); for (i = 0; i < e->nstamps; i++) seq_printf(seq, "%s %lu", i ? "," : "", e->stamps[i]); seq_printf(seq, "\n"); @@ -394,8 +463,22 @@ static int recent_seq_open(struct inode *inode, struct file *file) return 0; } -static ssize_t recent_proc_write(struct file *file, const char __user *input, - size_t size, loff_t *loff) +#ifdef CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT +static int recent_old_seq_open(struct inode *inode, struct file *filp) +{ + static bool warned_of_old; + + if (unlikely(!warned_of_old)) { + printk(KERN_INFO KBUILD_MODNAME ": Use of /proc/net/ipt_recent" + " is deprecated; use /proc/net/xt_recent.\n"); + warned_of_old = true; + } + return recent_seq_open(inode, filp); +} + +static ssize_t recent_old_proc_write(struct file *file, + const char __user *input, + size_t size, loff_t *loff) { const struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode); struct recent_table *t = pde->data; @@ -408,6 +491,7 @@ static ssize_t recent_proc_write(struct file *file, const char __user *input, size = sizeof(buf); if (copy_from_user(buf, input, size)) return -EFAULT; + while (isspace(*c)) c++; @@ -435,10 +519,10 @@ static ssize_t recent_proc_write(struct file *file, const char __user *input, addr = in_aton(c); spin_lock_bh(&recent_lock); - e = recent_entry_lookup(t, addr, 0); + e = recent_entry_lookup(t, (const void *)&addr, PF_INET, 0); if (e == NULL) { if (add) - recent_entry_init(t, addr, 0); + recent_entry_init(t, (const void *)&addr, PF_INET, 0); } else { if (add) recent_entry_update(t, e); @@ -449,23 +533,118 @@ static ssize_t recent_proc_write(struct file *file, const char __user *input, return size; } -static const struct file_operations recent_fops = { - .open = recent_seq_open, +static const struct file_operations recent_old_fops = { + .open = recent_old_seq_open, .read = seq_read, - .write = recent_proc_write, + .write = recent_old_proc_write, .release = seq_release_private, .owner = THIS_MODULE, }; +#endif + +static ssize_t +recent_mt_proc_write(struct file *file, const char __user *input, + size_t size, loff_t *loff) +{ + const struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode); + struct recent_table *t = pde->data; + struct recent_entry *e; + char buf[sizeof("+b335:1d35:1e55:dead:c0de:1715:5afe:c0de")]; + const char *c = buf; + union nf_inet_addr addr; + u_int16_t family; + bool add, succ; + + if (size == 0) + return 0; + if (size > sizeof(buf)) + size = sizeof(buf); + if (copy_from_user(buf, input, size) != 0) + return -EFAULT; + + /* Strict protocol! */ + if (*loff != 0) + return -ESPIPE; + switch (*c) { + case '/': /* flush table */ + spin_lock_bh(&recent_lock); + recent_table_flush(t); + spin_unlock_bh(&recent_lock); + return size; + case '-': /* remove address */ + add = false; + break; + case '+': /* add address */ + add = true; + break; + default: + printk(KERN_INFO KBUILD_MODNAME ": Need +ip, -ip or /\n"); + return -EINVAL; + } + + ++c; + --size; + if (strnchr(c, size, ':') != NULL) { + family = AF_INET6; + succ = in6_pton(c, size, (void *)&addr, '\n', NULL); + } else { + family = AF_INET; + succ = in4_pton(c, size, (void *)&addr, '\n', NULL); + } + + if (!succ) { + printk(KERN_INFO KBUILD_MODNAME ": illegal address written " + "to procfs\n"); + return -EINVAL; + } + + spin_lock_bh(&recent_lock); + e = recent_entry_lookup(t, &addr, family, 0); + if (e == NULL) { + if (add) + recent_entry_init(t, &addr, family, 0); + } else { + if (add) + recent_entry_update(t, e); + else + recent_entry_remove(t, e); + } + spin_unlock_bh(&recent_lock); + /* Note we removed one above */ + *loff += size + 1; + return size + 1; +} + +static const struct file_operations recent_mt_fops = { + .open = recent_seq_open, + .read = seq_read, + .write = recent_mt_proc_write, + .release = seq_release_private, + .owner = THIS_MODULE, +}; #endif /* CONFIG_PROC_FS */ -static struct xt_match recent_mt_reg __read_mostly = { - .name = "recent", - .family = AF_INET, - .match = recent_mt, - .matchsize = sizeof(struct xt_recent_mtinfo), - .checkentry = recent_mt_check, - .destroy = recent_mt_destroy, - .me = THIS_MODULE, +static struct xt_match recent_mt_reg[] __read_mostly = { + { + .name = "recent", + .revision = 0, + .family = AF_INET, + .match = recent_mt, + .matchsize = sizeof(struct xt_recent_mtinfo), + .checkentry = recent_mt_check, + .destroy = recent_mt_destroy, + .me = THIS_MODULE, + }, + { + .name = "recent", + .revision = 0, + .family = AF_INET6, + .match = recent_mt, + .matchsize = sizeof(struct xt_recent_mtinfo), + .checkentry = recent_mt_check, + .destroy = recent_mt_destroy, + .me = THIS_MODULE, + }, }; static int __init recent_mt_init(void) @@ -476,15 +655,25 @@ static int __init recent_mt_init(void) return -EINVAL; ip_list_hash_size = 1 << fls(ip_list_tot); - err = xt_register_match(&recent_mt_reg); + err = xt_register_matches(recent_mt_reg, ARRAY_SIZE(recent_mt_reg)); #ifdef CONFIG_PROC_FS if (err) return err; - proc_dir = proc_mkdir("ipt_recent", init_net.proc_net); - if (proc_dir == NULL) { - xt_unregister_match(&recent_mt_reg); + recent_proc_dir = proc_mkdir("xt_recent", init_net.proc_net); + if (recent_proc_dir == NULL) { + xt_unregister_matches(recent_mt_reg, ARRAY_SIZE(recent_mt_reg)); + err = -ENOMEM; + } +#ifdef CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT + if (err < 0) + return err; + proc_old_dir = proc_mkdir("ipt_recent", init_net.proc_net); + if (proc_old_dir == NULL) { + remove_proc_entry("xt_recent", init_net.proc_net); + xt_unregister_matches(recent_mt_reg, ARRAY_SIZE(recent_mt_reg)); err = -ENOMEM; } +#endif #endif return err; } @@ -492,9 +681,12 @@ static int __init recent_mt_init(void) static void __exit recent_mt_exit(void) { BUG_ON(!list_empty(&tables)); - xt_unregister_match(&recent_mt_reg); + xt_unregister_matches(recent_mt_reg, ARRAY_SIZE(recent_mt_reg)); #ifdef CONFIG_PROC_FS +#ifdef CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT remove_proc_entry("ipt_recent", init_net.proc_net); +#endif + remove_proc_entry("xt_recent", init_net.proc_net); #endif } -- cgit v1.2.3-70-g09d2 From d2f26037a38ada4a5d40d1cf0b32bc5289f50312 Mon Sep 17 00:00:00 2001 From: KOVACS Krisztian Date: Wed, 8 Oct 2008 11:35:12 +0200 Subject: netfilter: Add documentation for tproxy Add basic usage instructions to Documentation/networking. Signed-off-by: KOVACS Krisztian Signed-off-by: Patrick McHardy --- Documentation/networking/tproxy.txt | 85 +++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 Documentation/networking/tproxy.txt (limited to 'Documentation') diff --git a/Documentation/networking/tproxy.txt b/Documentation/networking/tproxy.txt new file mode 100644 index 00000000000..7b5996d9357 --- /dev/null +++ b/Documentation/networking/tproxy.txt @@ -0,0 +1,85 @@ +Transparent proxy support +========================= + +This feature adds Linux 2.2-like transparent proxy support to current kernels. +To use it, enable NETFILTER_TPROXY, the socket match and the TPROXY target in +your kernel config. You will need policy routing too, so be sure to enable that +as well. + + +1. Making non-local sockets work +================================ + +The idea is that you identify packets with destination address matching a local +socket on your box, set the packet mark to a certain value, and then match on that +value using policy routing to have those packets delivered locally: + +# iptables -t mangle -N DIVERT +# iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT +# iptables -t mangle -A DIVERT -j MARK --set-mark 1 +# iptables -t mangle -A DIVERT -j ACCEPT + +# ip rule add fwmark 1 lookup 100 +# ip route add local 0.0.0.0/0 dev lo table 100 + +Because of certain restrictions in the IPv4 routing output code you'll have to +modify your application to allow it to send datagrams _from_ non-local IP +addresses. All you have to do is enable the (SOL_IP, IP_TRANSPARENT) socket +option before calling bind: + +fd = socket(AF_INET, SOCK_STREAM, 0); +/* - 8< -*/ +int value = 1; +setsockopt(fd, SOL_IP, IP_TRANSPARENT, &value, sizeof(value)); +/* - 8< -*/ +name.sin_family = AF_INET; +name.sin_port = htons(0xCAFE); +name.sin_addr.s_addr = htonl(0xDEADBEEF); +bind(fd, &name, sizeof(name)); + +A trivial patch for netcat is available here: +http://people.netfilter.org/hidden/tproxy/netcat-ip_transparent-support.patch + + +2. Redirecting traffic +====================== + +Transparent proxying often involves "intercepting" traffic on a router. This is +usually done with the iptables REDIRECT target; however, there are serious +limitations of that method. One of the major issues is that it actually +modifies the packets to change the destination address -- which might not be +acceptable in certain situations. (Think of proxying UDP for example: you won't +be able to find out the original destination address. Even in case of TCP +getting the original destination address is racy.) + +The 'TPROXY' target provides similar functionality without relying on NAT. Simply +add rules like this to the iptables ruleset above: + +# iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY \ + --tproxy-mark 0x1/0x1 --on-port 50080 + +Note that for this to work you'll have to modify the proxy to enable (SOL_IP, +IP_TRANSPARENT) for the listening socket. + + +3. Iptables extensions +====================== + +To use tproxy you'll need to have the 'socket' and 'TPROXY' modules +compiled for iptables. A patched version of iptables is available +here: http://git.balabit.hu/?p=bazsi/iptables-tproxy.git + + +4. Application support +====================== + +4.1. Squid +---------- + +Squid 3.HEAD has support built-in. To use it, pass +'--enable-linux-netfilter' to configure and set the 'tproxy' option on +the HTTP listener you redirect traffic to with the TPROXY iptables +target. + +For more information please consult the following page on the Squid +wiki: http://wiki.squid-cache.org/Features/Tproxy4 -- cgit v1.2.3-70-g09d2 From 36d9573928f9ab126d0089ead7ea5d2ab18fbfa9 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 6 Oct 2008 02:51:09 -0400 Subject: Input: document i8042.debug in kernel-parameters.txt i8042.debug parameter was missing in Documentation/kernel-parameters.txt. Add it. Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov --- Documentation/kernel-parameters.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e7bea3e8530..88600fe5fdc 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -794,6 +794,7 @@ and is between 256 and 4096 characters. It is defined in the file Defaults to the default architecture's huge page size if not specified. + i8042.debug [HW] Toggle i8042 debug mode i8042.direct [HW] Put keyboard port into non-translated mode i8042.dumbkbd [HW] Pretend that controller can only read data from keyboard and cannot control its state -- cgit v1.2.3-70-g09d2 From 6a421c1dc94b12923294a359822346f12492de5e Mon Sep 17 00:00:00 2001 From: Aaron Carroll Date: Thu, 14 Aug 2008 18:17:15 +1000 Subject: block: update documentation for deadline fifo_batch tunable Update the description of fifo_batch to match the current implementation, and include a description of how to tune it. Signed-off-by: Aaron Carroll Signed-off-by: Jens Axboe --- Documentation/block/deadline-iosched.txt | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.txt index c23cab13c3d..72576769e0f 100644 --- a/Documentation/block/deadline-iosched.txt +++ b/Documentation/block/deadline-iosched.txt @@ -30,12 +30,18 @@ write_expire (in ms) Similar to read_expire mentioned above, but for writes. -fifo_batch +fifo_batch (number of requests) ---------- -When a read request expires its deadline, we must move some requests from -the sorted io scheduler list to the block device dispatch queue. fifo_batch -controls how many requests we move. +Requests are grouped into ``batches'' of a particular data direction (read or +write) which are serviced in increasing sector order. To limit extra seeking, +deadline expiries are only checked between batches. fifo_batch controls the +maximum number of requests per batch. + +This parameter tunes the balance between per-request latency and aggregate +throughput. When low latency is the primary concern, smaller is better (where +a value of 1 yields first-come first-served behaviour). Increasing fifo_batch +generally improves throughput, at the cost of latency variation. writes_starved (number of dispatches) -- cgit v1.2.3-70-g09d2 From 710027a48ede75428cc68eaa8ae2269b1e356e2c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 19 Aug 2008 20:13:11 +0200 Subject: Add some block/ source files to the kernel-api docbook. Fix kernel-doc notation in them as needed. Fix changed function parameter names. Fix typos/spellos. In comments, change REQ_SPECIAL to REQ_TYPE_SPECIAL and REQ_BLOCK_PC to REQ_TYPE_BLOCK_PC. Signed-off-by: Randy Dunlap Signed-off-by: Jens Axboe --- Documentation/DocBook/kernel-api.tmpl | 4 ++ block/blk-core.c | 72 +++++++++++++++++------------------ block/blk-exec.c | 6 +-- block/blk-integrity.c | 4 +- block/blk-map.c | 16 ++++---- block/blk-settings.c | 8 ++-- block/blk-tag.c | 8 ++-- block/genhd.c | 5 ++- 8 files changed, 64 insertions(+), 59 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index b7b1482f6e0..f5696ba9ae9 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -364,6 +364,10 @@ X!Edrivers/pnp/system.c !Eblock/blk-barrier.c !Eblock/blk-tag.c !Iblock/blk-tag.c +!Eblock/blk-integrity.c +!Iblock/blktrace.c +!Iblock/genhd.c +!Eblock/genhd.c diff --git a/block/blk-core.c b/block/blk-core.c index 2616cdd049a..86d22e7d65c 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -531,7 +531,7 @@ EXPORT_SYMBOL(blk_alloc_queue_node); * request queue; this lock will be taken also from interrupt context, so irq * disabling is needed for it. * - * Function returns a pointer to the initialized request queue, or NULL if + * Function returns a pointer to the initialized request queue, or %NULL if * it didn't succeed. * * Note: @@ -913,7 +913,7 @@ void blk_requeue_request(struct request_queue *q, struct request *rq) EXPORT_SYMBOL(blk_requeue_request); /** - * blk_insert_request - insert a special request in to a request queue + * blk_insert_request - insert a special request into a request queue * @q: request queue where request should be inserted * @rq: request to be inserted * @at_head: insert request at head or tail of queue @@ -923,8 +923,8 @@ EXPORT_SYMBOL(blk_requeue_request); * Many block devices need to execute commands asynchronously, so they don't * block the whole kernel from preemption during request execution. This is * accomplished normally by inserting aritficial requests tagged as - * REQ_SPECIAL in to the corresponding request queue, and letting them be - * scheduled for actual execution by the request queue. + * REQ_TYPE_SPECIAL in to the corresponding request queue, and letting them + * be scheduled for actual execution by the request queue. * * We have the option of inserting the head or the tail of the queue. * Typically we use the tail for new ioctls and so forth. We use the head @@ -1322,7 +1322,7 @@ static inline int bio_check_eod(struct bio *bio, unsigned int nr_sectors) } /** - * generic_make_request: hand a buffer to its device driver for I/O + * generic_make_request - hand a buffer to its device driver for I/O * @bio: The bio describing the location in memory and on the device. * * generic_make_request() is used to make I/O requests of block @@ -1480,13 +1480,13 @@ void generic_make_request(struct bio *bio) EXPORT_SYMBOL(generic_make_request); /** - * submit_bio: submit a bio to the block device layer for I/O + * submit_bio - submit a bio to the block device layer for I/O * @rw: whether to %READ or %WRITE, or maybe to %READA (read ahead) * @bio: The &struct bio which describes the I/O * * submit_bio() is very similar in purpose to generic_make_request(), and * uses that function to do most of the work. Both are fairly rough - * interfaces, @bio must be presetup and ready for I/O. + * interfaces; @bio must be presetup and ready for I/O. * */ void submit_bio(int rw, struct bio *bio) @@ -1524,7 +1524,7 @@ EXPORT_SYMBOL(submit_bio); /** * __end_that_request_first - end I/O on a request * @req: the request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete * * Description: @@ -1532,8 +1532,8 @@ EXPORT_SYMBOL(submit_bio); * for the next range of segments (if any) in the cluster. * * Return: - * 0 - we are done with this request, call end_that_request_last() - * 1 - still buffers pending for this request + * %0 - we are done with this request, call end_that_request_last() + * %1 - still buffers pending for this request **/ static int __end_that_request_first(struct request *req, int error, int nr_bytes) @@ -1544,7 +1544,7 @@ static int __end_that_request_first(struct request *req, int error, blk_add_trace_rq(req->q, req, BLK_TA_COMPLETE); /* - * for a REQ_BLOCK_PC request, we want to carry any eventual + * for a REQ_TYPE_BLOCK_PC request, we want to carry any eventual * sense key with us all the way through */ if (!blk_pc_request(req)) @@ -1810,11 +1810,11 @@ EXPORT_SYMBOL_GPL(blk_rq_cur_bytes); /** * end_queued_request - end all I/O on a queued request * @rq: the request being processed - * @uptodate: error value or 0/1 uptodate flag + * @uptodate: error value or %0/%1 uptodate flag * * Description: * Ends all I/O on a request, and removes it from the block layer queues. - * Not suitable for normal IO completion, unless the driver still has + * Not suitable for normal I/O completion, unless the driver still has * the request attached to the block layer. * **/ @@ -1827,7 +1827,7 @@ EXPORT_SYMBOL(end_queued_request); /** * end_dequeued_request - end all I/O on a dequeued request * @rq: the request being processed - * @uptodate: error value or 0/1 uptodate flag + * @uptodate: error value or %0/%1 uptodate flag * * Description: * Ends all I/O on a request. The request must already have been @@ -1845,14 +1845,14 @@ EXPORT_SYMBOL(end_dequeued_request); /** * end_request - end I/O on the current segment of the request * @req: the request being processed - * @uptodate: error value or 0/1 uptodate flag + * @uptodate: error value or %0/%1 uptodate flag * * Description: * Ends I/O on the current segment of a request. If that is the only * remaining segment, the request is also completed and freed. * - * This is a remnant of how older block drivers handled IO completions. - * Modern drivers typically end IO on the full request in one go, unless + * This is a remnant of how older block drivers handled I/O completions. + * Modern drivers typically end I/O on the full request in one go, unless * they have a residual value to account for. For that case this function * isn't really useful, unless the residual just happens to be the * full current segment. In other words, don't use this function in new @@ -1870,12 +1870,12 @@ EXPORT_SYMBOL(end_request); /** * blk_end_io - Generic end_io function to complete a request. * @rq: the request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete @rq * @bidi_bytes: number of bytes to complete @rq->next_rq * @drv_callback: function called between completion of bios in the request * and completion of the request. - * If the callback returns non 0, this helper returns without + * If the callback returns non %0, this helper returns without * completion of the request. * * Description: @@ -1883,8 +1883,8 @@ EXPORT_SYMBOL(end_request); * If @rq has leftover, sets it up for the next range of segments. * * Return: - * 0 - we are done with this request - * 1 - this request is not freed yet, it still has pending buffers. + * %0 - we are done with this request + * %1 - this request is not freed yet, it still has pending buffers. **/ static int blk_end_io(struct request *rq, int error, unsigned int nr_bytes, unsigned int bidi_bytes, @@ -1919,7 +1919,7 @@ static int blk_end_io(struct request *rq, int error, unsigned int nr_bytes, /** * blk_end_request - Helper function for drivers to complete the request. * @rq: the request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete * * Description: @@ -1927,8 +1927,8 @@ static int blk_end_io(struct request *rq, int error, unsigned int nr_bytes, * If @rq has leftover, sets it up for the next range of segments. * * Return: - * 0 - we are done with this request - * 1 - still buffers pending for this request + * %0 - we are done with this request + * %1 - still buffers pending for this request **/ int blk_end_request(struct request *rq, int error, unsigned int nr_bytes) { @@ -1939,15 +1939,15 @@ EXPORT_SYMBOL_GPL(blk_end_request); /** * __blk_end_request - Helper function for drivers to complete the request. * @rq: the request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete * * Description: * Must be called with queue lock held unlike blk_end_request(). * * Return: - * 0 - we are done with this request - * 1 - still buffers pending for this request + * %0 - we are done with this request + * %1 - still buffers pending for this request **/ int __blk_end_request(struct request *rq, int error, unsigned int nr_bytes) { @@ -1966,7 +1966,7 @@ EXPORT_SYMBOL_GPL(__blk_end_request); /** * blk_end_bidi_request - Helper function for drivers to complete bidi request. * @rq: the bidi request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete @rq * @bidi_bytes: number of bytes to complete @rq->next_rq * @@ -1974,8 +1974,8 @@ EXPORT_SYMBOL_GPL(__blk_end_request); * Ends I/O on a number of bytes attached to @rq and @rq->next_rq. * * Return: - * 0 - we are done with this request - * 1 - still buffers pending for this request + * %0 - we are done with this request + * %1 - still buffers pending for this request **/ int blk_end_bidi_request(struct request *rq, int error, unsigned int nr_bytes, unsigned int bidi_bytes) @@ -1987,11 +1987,11 @@ EXPORT_SYMBOL_GPL(blk_end_bidi_request); /** * blk_end_request_callback - Special helper function for tricky drivers * @rq: the request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete * @drv_callback: function called between completion of bios in the request * and completion of the request. - * If the callback returns non 0, this helper returns without + * If the callback returns non %0, this helper returns without * completion of the request. * * Description: @@ -2004,10 +2004,10 @@ EXPORT_SYMBOL_GPL(blk_end_bidi_request); * Don't use this interface in other places anymore. * * Return: - * 0 - we are done with this request - * 1 - this request is not freed yet. - * this request still has pending buffers or - * the driver doesn't want to finish this request yet. + * %0 - we are done with this request + * %1 - this request is not freed yet. + * this request still has pending buffers or + * the driver doesn't want to finish this request yet. **/ int blk_end_request_callback(struct request *rq, int error, unsigned int nr_bytes, diff --git a/block/blk-exec.c b/block/blk-exec.c index 9bceff7674f..6af716d1e54 100644 --- a/block/blk-exec.c +++ b/block/blk-exec.c @@ -16,7 +16,7 @@ /** * blk_end_sync_rq - executes a completion event on a request * @rq: request to complete - * @error: end io status of the request + * @error: end I/O status of the request */ static void blk_end_sync_rq(struct request *rq, int error) { @@ -41,7 +41,7 @@ static void blk_end_sync_rq(struct request *rq, int error) * @done: I/O completion handler * * Description: - * Insert a fully prepared request at the back of the io scheduler queue + * Insert a fully prepared request at the back of the I/O scheduler queue * for execution. Don't wait for completion. */ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk, @@ -72,7 +72,7 @@ EXPORT_SYMBOL_GPL(blk_execute_rq_nowait); * @at_head: insert request at head or tail of queue * * Description: - * Insert a fully prepared request at the back of the io scheduler queue + * Insert a fully prepared request at the back of the I/O scheduler queue * for execution and wait for completion. */ int blk_execute_rq(struct request_queue *q, struct gendisk *bd_disk, diff --git a/block/blk-integrity.c b/block/blk-integrity.c index 3f1a8478cc3..d87606eaca1 100644 --- a/block/blk-integrity.c +++ b/block/blk-integrity.c @@ -109,8 +109,8 @@ EXPORT_SYMBOL(blk_rq_map_integrity_sg); /** * blk_integrity_compare - Compare integrity profile of two block devices - * @b1: Device to compare - * @b2: Device to compare + * @bd1: Device to compare + * @bd2: Device to compare * * Description: Meta-devices like DM and MD need to verify that all * sub-devices use the same integrity format before advertising to diff --git a/block/blk-map.c b/block/blk-map.c index af37e4ae62f..ea1bf53929e 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -85,17 +85,17 @@ static int __blk_rq_map_user(struct request_queue *q, struct request *rq, } /** - * blk_rq_map_user - map user data to a request, for REQ_BLOCK_PC usage + * blk_rq_map_user - map user data to a request, for REQ_TYPE_BLOCK_PC usage * @q: request queue where request should be inserted * @rq: request structure to fill * @ubuf: the user buffer * @len: length of user data * * Description: - * Data will be mapped directly for zero copy io, if possible. Otherwise + * Data will be mapped directly for zero copy I/O, if possible. Otherwise * a kernel bounce buffer is used. * - * A matching blk_rq_unmap_user() must be issued at the end of io, while + * A matching blk_rq_unmap_user() must be issued at the end of I/O, while * still in process context. * * Note: The mapped bio may need to be bounced through blk_queue_bounce() @@ -154,7 +154,7 @@ unmap_rq: EXPORT_SYMBOL(blk_rq_map_user); /** - * blk_rq_map_user_iov - map user data to a request, for REQ_BLOCK_PC usage + * blk_rq_map_user_iov - map user data to a request, for REQ_TYPE_BLOCK_PC usage * @q: request queue where request should be inserted * @rq: request to map data to * @iov: pointer to the iovec @@ -162,10 +162,10 @@ EXPORT_SYMBOL(blk_rq_map_user); * @len: I/O byte count * * Description: - * Data will be mapped directly for zero copy io, if possible. Otherwise + * Data will be mapped directly for zero copy I/O, if possible. Otherwise * a kernel bounce buffer is used. * - * A matching blk_rq_unmap_user() must be issued at the end of io, while + * A matching blk_rq_unmap_user() must be issued at the end of I/O, while * still in process context. * * Note: The mapped bio may need to be bounced through blk_queue_bounce() @@ -224,7 +224,7 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq, * Description: * Unmap a rq previously mapped by blk_rq_map_user(). The caller must * supply the original rq->bio from the blk_rq_map_user() return, since - * the io completion may have changed rq->bio. + * the I/O completion may have changed rq->bio. */ int blk_rq_unmap_user(struct bio *bio) { @@ -250,7 +250,7 @@ int blk_rq_unmap_user(struct bio *bio) EXPORT_SYMBOL(blk_rq_unmap_user); /** - * blk_rq_map_kern - map kernel data to a request, for REQ_BLOCK_PC usage + * blk_rq_map_kern - map kernel data to a request, for REQ_TYPE_BLOCK_PC usage * @q: request queue where request should be inserted * @rq: request to fill * @kbuf: the kernel buffer diff --git a/block/blk-settings.c b/block/blk-settings.c index 539d873c820..d70692badcd 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -144,7 +144,7 @@ EXPORT_SYMBOL(blk_queue_make_request); * Different hardware can have different requirements as to what pages * it can do I/O directly to. A low level driver can call * blk_queue_bounce_limit to have lower memory pages allocated as bounce - * buffers for doing I/O to pages residing above @page. + * buffers for doing I/O to pages residing above @dma_addr. **/ void blk_queue_bounce_limit(struct request_queue *q, u64 dma_addr) { @@ -229,7 +229,7 @@ EXPORT_SYMBOL(blk_queue_max_phys_segments); * Description: * Enables a low level driver to set an upper limit on the number of * hw data segments in a request. This would be the largest number of - * address/length pairs the host adapter can actually give as once + * address/length pairs the host adapter can actually give at once * to the device. **/ void blk_queue_max_hw_segments(struct request_queue *q, @@ -410,7 +410,7 @@ EXPORT_SYMBOL(blk_queue_segment_boundary); * @mask: alignment mask * * description: - * set required memory and length aligment for direct dma transactions. + * set required memory and length alignment for direct dma transactions. * this is used when buiding direct io requests for the queue. * **/ @@ -426,7 +426,7 @@ EXPORT_SYMBOL(blk_queue_dma_alignment); * @mask: alignment mask * * description: - * update required memory and length aligment for direct dma transactions. + * update required memory and length alignment for direct dma transactions. * If the requested alignment is larger than the current alignment, then * the current queue alignment is updated to the new value, otherwise it * is left alone. The design of this is to allow multiple objects diff --git a/block/blk-tag.c b/block/blk-tag.c index ed5166fbc59..8a99688eb1b 100644 --- a/block/blk-tag.c +++ b/block/blk-tag.c @@ -29,7 +29,7 @@ EXPORT_SYMBOL(blk_queue_find_tag); * __blk_free_tags - release a given set of tag maintenance info * @bqt: the tag map to free * - * Tries to free the specified @bqt@. Returns true if it was + * Tries to free the specified @bqt. Returns true if it was * actually freed and false if there are still references using it */ static int __blk_free_tags(struct blk_queue_tag *bqt) @@ -78,7 +78,7 @@ void __blk_queue_free_tags(struct request_queue *q) * blk_free_tags - release a given set of tag maintenance info * @bqt: the tag map to free * - * For externally managed @bqt@ frees the map. Callers of this + * For externally managed @bqt frees the map. Callers of this * function must guarantee to have released all the queues that * might have been using this tag map. */ @@ -94,7 +94,7 @@ EXPORT_SYMBOL(blk_free_tags); * @q: the request queue for the device * * Notes: - * This is used to disabled tagged queuing to a device, yet leave + * This is used to disable tagged queuing to a device, yet leave * queue in function. **/ void blk_queue_free_tags(struct request_queue *q) @@ -271,7 +271,7 @@ EXPORT_SYMBOL(blk_queue_resize_tags); * @rq: the request that has completed * * Description: - * Typically called when end_that_request_first() returns 0, meaning + * Typically called when end_that_request_first() returns %0, meaning * all transfers have been done for a request. It's important to call * this function before end_that_request_last(), as that will put the * request back on the free list thus corrupting the internal tag list. diff --git a/block/genhd.c b/block/genhd.c index e0ce23ac2ec..c114a43052d 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -211,10 +211,11 @@ void unlink_gendisk(struct gendisk *disk) /** * get_gendisk - get partitioning information for a given device - * @dev: device to get partitioning information for + * @devt: device to get partitioning information for + * @part: returned partition index * * This function gets the structure containing partitioning - * information for the given device @dev. + * information for the given device @devt. */ struct gendisk *get_gendisk(dev_t devt, int *part) { -- cgit v1.2.3-70-g09d2 From 79eb014578b79fcfb9d9e7dc979d1316079220aa Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 18 Sep 2008 09:35:28 -0700 Subject: fix an example of scatterlists handling in DMA-API.txt This example isn't the proper way to handle scatterlists (can't handle sg chaining). Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- Documentation/DMA-API.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index d8b63d164e4..b8e86460046 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -337,7 +337,7 @@ With scatterlists, you use the resulting mapping like this: int i, count = dma_map_sg(dev, sglist, nents, direction); struct scatterlist *sg; - for (i = 0, sg = sglist; i < count; i++, sg++) { + for_each_sg(sglist, sg, count, i) { hw_address[i] = sg_dma_address(sg); hw_len[i] = sg_dma_len(sg); } -- cgit v1.2.3-70-g09d2 From ddedc658fc56bb5b9b200d7f4df6e93e1d0d8048 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 9 Oct 2008 15:33:58 +0200 Subject: hwmon: Define sysfs interface for energy consumption register Describe the sysfs files that were introduced in the ibmaem driver. Signed-off-by: Darrick J. Wong Signed-off-by: Jean Delvare --- Documentation/hwmon/sysfs-interface | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'Documentation') diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 2d845730d4e..6dbfd5efd99 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -329,6 +329,10 @@ power[1-*]_average Average power use Unit: microWatt RO +power[1-*]_average_interval Power use averaging interval + Unit: milliseconds + RW + power[1-*]_average_highest Historical average maximum power use Unit: microWatt RO @@ -353,6 +357,14 @@ power[1-*]_reset_history Reset input_highest, input_lowest, average_highest and average_lowest. WO +********** +* Energy * +********** + +energy[1-*]_input Cumulative energy use + Unit: microJoule + RO + ********** * Alarms * ********** -- cgit v1.2.3-70-g09d2 From c73c556c1ae3619d8a7c55254b0ddcf10034a914 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 9 Oct 2008 15:33:58 +0200 Subject: hwmon: (adt7473) Fix some bogosity in documentation file Signed-off-by: Darrick J. Wong Signed-off-by: Jean Delvare --- Documentation/hwmon/adt7473 | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473 index 2126de34c71..1cbf671822e 100644 --- a/Documentation/hwmon/adt7473 +++ b/Documentation/hwmon/adt7473 @@ -14,14 +14,14 @@ Description This driver implements support for the Analog Devices ADT7473 chip family. -The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 +The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0 specification. Using an analog to digital converter it measures three (3) -temperatures and two (2) voltages. It has three (3) 16-bit counters for +temperatures and two (2) voltages. It has four (4) 16-bit counters for measuring fan speed. There are three (3) PWM outputs that can be used to control fan speed. A sophisticated control system for the PWM outputs is designed into the -LM85 that allows fan speed to be adjusted automatically based on any of the +ADT7473 that allows fan speed to be adjusted automatically based on any of the three temperature sensors. Each PWM output is individually adjustable and programmable. Once configured, the ADT7473 will adjust the PWM outputs in response to the measured temperatures without further host intervention. @@ -46,14 +46,6 @@ from the raw value to get the temperature value. The Analog Devices datasheet is very detailed and describes a procedure for determining an optimal configuration for the automatic PWM control. -Hardware Configurations ------------------------ - -The ADT7473 chips have an optional SMBALERT output that can be used to -signal the chipset in case a limit is exceeded or the temperature sensors -fail. Individual sensor interrupts can be masked so they won't trigger -SMBALERT. The SMBALERT output if configured replaces the PWM2 function. - Configuration Notes ------------------- @@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following: * PWM Control -* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and -* pwm#_auto_point2_pwm and pwm#_auto_point2_temp - +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - point1: Set the pwm speed at a lower temperature bound. point2: Set the pwm speed at a higher temperature bound. -- cgit v1.2.3-70-g09d2 From 8d5922572038bae9f7b16fcb974eee806727b44c Mon Sep 17 00:00:00 2001 From: Németh Márton Date: Thu, 9 Oct 2008 14:59:17 +0200 Subject: [CPUFREQ] correct broken links and email addresses MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Replace the no longer working links and email address in the documentation and in source code. Signed-off-by: Márton Németh Signed-off-by: Dave Jones --- Documentation/cpu-freq/index.txt | 10 ++++------ arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 2 +- arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c | 2 +- 3 files changed, 6 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cpu-freq/index.txt b/Documentation/cpu-freq/index.txt index ffdb5323df3..3d0b915035b 100644 --- a/Documentation/cpu-freq/index.txt +++ b/Documentation/cpu-freq/index.txt @@ -35,11 +35,9 @@ Mailing List ------------ There is a CPU frequency changing CVS commit and general list where you can report bugs, problems or submit patches. To post a message, -send an email to cpufreq@lists.linux.org.uk, to subscribe go to -http://lists.linux.org.uk/mailman/listinfo/cpufreq. Previous post to the -mailing list are available to subscribers at -http://lists.linux.org.uk/mailman/private/cpufreq/. - +send an email to cpufreq@vger.kernel.org, to subscribe go to +http://vger.kernel.org/vger-lists.html#cpufreq and follow the +instructions there. Links ----- @@ -50,7 +48,7 @@ how to access the CVS repository: * http://cvs.arm.linux.org.uk/ the CPUFreq Mailing list: -* http://lists.linux.org.uk/mailman/listinfo/cpufreq +* http://vger.kernel.org/vger-lists.html#cpufreq Clock and voltage scaling for the SA-1100: * http://www.lartmaker.nl/projects/scaling diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index f1685fb91fb..b8e05ee4f73 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -171,7 +171,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) } if (c->x86 != 0xF) { - printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to \n"); + printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to \n"); return 0; } diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c index 15e13c01cc3..3b5f06423e7 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c @@ -26,7 +26,7 @@ #include #define PFX "speedstep-centrino: " -#define MAINTAINER "cpufreq@lists.linux.org.uk" +#define MAINTAINER "cpufreq@vger.kernel.org" #define dprintk(msg...) \ cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg) -- cgit v1.2.3-70-g09d2 From 3bbfe0596746e1590888a6e1e6a07583265238b7 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 10 Oct 2008 03:27:16 +0400 Subject: proc: remove kernel.maps_protect After commit 831830b5a2b5d413407adf380ef62fe17d6fcbf2 aka "restrict reading from /proc//maps to those who share ->mm or can ptrace" sysctl stopped being relevant because commit moved security checks from ->show time to ->start time (mm_for_maps()). Signed-off-by: Alexey Dobriyan Acked-by: Kees Cook --- Documentation/filesystems/proc.txt | 7 ------- fs/proc/base.c | 3 --- fs/proc/internal.h | 2 -- fs/proc/task_mmu.c | 16 +--------------- fs/proc/task_nommu.c | 5 ----- kernel/sysctl.c | 11 ----------- 6 files changed, 1 insertion(+), 43 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index f566ad9bcb7..63ed861d5ca 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1332,13 +1332,6 @@ determine whether or not they are still functioning properly. Because the NMI watchdog shares registers with oprofile, by disabling the NMI watchdog, oprofile may have more registers to utilize. -maps_protect ------------- - -Enables/Disables the protection of the per-process proc entries "maps" and -"smaps". When enabled, the contents of these files are visible only to -readers that are allowed to ptrace() the given process. - msgmni ------ diff --git a/fs/proc/base.c b/fs/proc/base.c index c1332dd2575..b5918ae8ca7 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -148,9 +148,6 @@ static unsigned int pid_entry_count_dirs(const struct pid_entry *entries, return count; } -int maps_protect; -EXPORT_SYMBOL(maps_protect); - static struct fs_struct *get_fs_struct(struct task_struct *task) { struct fs_struct *fs; diff --git a/fs/proc/internal.h b/fs/proc/internal.h index 442202314d5..3bfb7b8747b 100644 --- a/fs/proc/internal.h +++ b/fs/proc/internal.h @@ -45,8 +45,6 @@ do { \ extern int nommu_vma_show(struct seq_file *, struct vm_area_struct *); #endif -extern int maps_protect; - extern int proc_tid_stat(struct seq_file *m, struct pid_namespace *ns, struct pid *pid, struct task_struct *task); extern int proc_tgid_stat(struct seq_file *m, struct pid_namespace *ns, diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 73d1891ee62..4806830ea2a 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -210,9 +210,6 @@ static int show_map(struct seq_file *m, void *v) dev_t dev = 0; int len; - if (maps_protect && !ptrace_may_access(task, PTRACE_MODE_READ)) - return -EACCES; - if (file) { struct inode *inode = vma->vm_file->f_path.dentry->d_inode; dev = inode->i_sb->s_dev; @@ -742,22 +739,11 @@ const struct file_operations proc_pagemap_operations = { #ifdef CONFIG_NUMA extern int show_numa_map(struct seq_file *m, void *v); -static int show_numa_map_checked(struct seq_file *m, void *v) -{ - struct proc_maps_private *priv = m->private; - struct task_struct *task = priv->task; - - if (maps_protect && !ptrace_may_access(task, PTRACE_MODE_READ)) - return -EACCES; - - return show_numa_map(m, v); -} - static const struct seq_operations proc_pid_numa_maps_op = { .start = m_start, .next = m_next, .stop = m_stop, - .show = show_numa_map_checked + .show = show_numa_map, }; static int numa_maps_open(struct inode *inode, struct file *file) diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c index 5d84e7121df..219bd79ea89 100644 --- a/fs/proc/task_nommu.c +++ b/fs/proc/task_nommu.c @@ -110,11 +110,6 @@ int task_statm(struct mm_struct *mm, int *shared, int *text, static int show_map(struct seq_file *m, void *_vml) { struct vm_list_struct *vml = _vml; - struct proc_maps_private *priv = m->private; - struct task_struct *task = priv->task; - - if (maps_protect && !ptrace_may_access(task, PTRACE_MODE_READ)) - return -EACCES; return nommu_vma_show(m, vml->vma); } diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 50ec0886fa3..cc3e0d7a5ac 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -80,7 +80,6 @@ extern int pid_max_min, pid_max_max; extern int sysctl_drop_caches; extern int percpu_pagelist_fraction; extern int compat_log; -extern int maps_protect; extern int latencytop_enabled; extern int sysctl_nr_open_min, sysctl_nr_open_max; #ifdef CONFIG_RCU_TORTURE_TEST @@ -809,16 +808,6 @@ static struct ctl_table kern_table[] = { .mode = 0644, .proc_handler = &proc_dointvec, }, -#endif -#ifdef CONFIG_PROC_FS - { - .ctl_name = CTL_UNNUMBERED, - .procname = "maps_protect", - .data = &maps_protect, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec, - }, #endif { .ctl_name = CTL_UNNUMBERED, -- cgit v1.2.3-70-g09d2 From b911e473d24633c19414b54b82b9ff0b1a2419d7 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 10 Oct 2008 08:22:44 +0200 Subject: doc/cdrom: Trvial documentation error, file not present The sbpcd tester program is not included in the kernel source tree, so remove the reference to it. Signed-off-by: Randy Dunlap Reported-by: Nick Warne Signed-off-by: Jens Axboe --- Documentation/cdrom/ide-cd | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cdrom/ide-cd b/Documentation/cdrom/ide-cd index 91c0dcc6fa5..2c558cd6c1e 100644 --- a/Documentation/cdrom/ide-cd +++ b/Documentation/cdrom/ide-cd @@ -145,8 +145,7 @@ useful for reading photocds. To play an audio CD, you should first unmount and remove any data CDROM. Any of the CDROM player programs should then work (workman, -workbone, cdplayer, etc.). Lacking anything else, you could use the -cdtester program in Documentation/cdrom/sbpcd. +workbone, cdplayer, etc.). On a few drives, you can read digital audio directly using a program such as cdda2wav. The only types of drive which I've heard support -- cgit v1.2.3-70-g09d2 From d45387d8bce2674fd21369a394933a02b8125878 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Fri, 10 Oct 2008 21:33:07 +0200 Subject: [S390] cio: Update cio_ignore documentation. Add documentation for the new "purge" cio_ignore parameter. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- Documentation/s390/CommonIO | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/s390/CommonIO b/Documentation/s390/CommonIO index bf0baa19ec2..428e5c859b6 100644 --- a/Documentation/s390/CommonIO +++ b/Documentation/s390/CommonIO @@ -70,13 +70,19 @@ Command line parameters Note: While already known devices can be added to the list of devices to be ignored, there will be no effect on then. However, if such a device - disappears and then reappears, it will then be ignored. + disappears and then reappears, it will then be ignored. To make + known devices go away, you need the "purge" command (see below). For example, "echo add 0.0.a000-0.0.accc, 0.0.af00-0.0.afff > /proc/cio_ignore" will add 0.0.a000-0.0.accc and 0.0.af00-0.0.afff to the list of ignored devices. + You can remove already known but now ignored devices via + "echo purge > /proc/cio_ignore" + All devices ignored but still registered and not online (= not in use) + will be deregistered and thus removed from the system. + The devices can be specified either by bus id (0.x.abcd) or, for 2.4 backward compatibility, by the device number in hexadecimal (0xabcd or abcd). Device numbers given as 0xabcd will be interpreted as 0.0.abcd. -- cgit v1.2.3-70-g09d2 From e4a1afaeb1d9ebc09f46d8b229ac96116974b1b8 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Fri, 10 Oct 2008 21:33:08 +0200 Subject: [S390] cio: Exorcise cio_msg= from documentation. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- Documentation/s390/CommonIO | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/s390/CommonIO b/Documentation/s390/CommonIO index 428e5c859b6..339207d11d9 100644 --- a/Documentation/s390/CommonIO +++ b/Documentation/s390/CommonIO @@ -104,8 +104,7 @@ debugfs entries handling). - /sys/kernel/debug/s390dbf/cio_msg/sprintf - Various debug messages from the common I/O-layer, including messages - printed when cio_msg=yes. + Various debug messages from the common I/O-layer. - /sys/kernel/debug/s390dbf/cio_trace/hex_ascii Logs the calling of functions in the common I/O-layer and, if applicable, -- cgit v1.2.3-70-g09d2 From 061b1bd394ca8628b7c24eb4658ba3535da4249a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 24 Sep 2008 14:46:44 -0700 Subject: Staging: add TAINT_CRAP for all drivers/staging code We need to add a flag for all code that is in the drivers/staging/ directory to prevent all other kernel developers from worrying about issues here, and to notify users that the drivers might not be as good as they are normally used to. Based on code from Andreas Gruenbacher and Jeff Mahoney to provide a TAINT flag for the support level of a kernel module in the Novell enterprise kernel release. This is the kernel portion of this feature, the ability for the flag to be set needs to be done in the build process and will happen in a follow-up patch. Cc: Andreas Gruenbacher Cc: Jeff Mahoney Signed-off-by: Greg Kroah-Hartman --- Documentation/sysctl/kernel.txt | 1 + include/linux/kernel.h | 1 + kernel/module.c | 11 +++++++++++ kernel/panic.c | 6 ++++-- 4 files changed, 17 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index e1ff0d920a5..bde799e0659 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -369,4 +369,5 @@ can be ORed together: 2 - A module was force loaded by insmod -f. Set by modutils >= 2.4.9 and module-init-tools. 4 - Unsafe SMP processors: SMP with CPUs not designed for SMP. + 64 - A module from drivers/staging was loaded. diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 2651f805ba6..b36805cb95f 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -260,6 +260,7 @@ extern enum system_states { #define TAINT_DIE (1<<7) #define TAINT_OVERRIDDEN_ACPI_TABLE (1<<8) #define TAINT_WARN (1<<9) +#define TAINT_CRAP (1<<10) extern void dump_stack(void) __cold; diff --git a/kernel/module.c b/kernel/module.c index 9db11911e04..152b1655bba 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1806,6 +1806,7 @@ static noinline struct module *load_module(void __user *umod, Elf_Ehdr *hdr; Elf_Shdr *sechdrs; char *secstrings, *args, *modmagic, *strtab = NULL; + char *staging; unsigned int i; unsigned int symindex = 0; unsigned int strindex = 0; @@ -1960,6 +1961,14 @@ static noinline struct module *load_module(void __user *umod, goto free_hdr; } + staging = get_modinfo(sechdrs, infoindex, "staging"); + if (staging) { + add_taint_module(mod, TAINT_CRAP); + printk(KERN_WARNING "%s: module is from the staging directory," + " the quality is unknown, you have been warned.\n", + mod->name); + } + /* Now copy in args */ args = strndup_user(uargs, ~0UL >> 1); if (IS_ERR(args)) { @@ -2556,6 +2565,8 @@ static char *module_flags(struct module *mod, char *buf) buf[bx++] = 'P'; if (mod->taints & TAINT_FORCED_MODULE) buf[bx++] = 'F'; + if (mod->taints & TAINT_CRAP) + buf[bx++] = 'C'; /* * TAINT_FORCED_RMMOD: could be added. * TAINT_UNSAFE_SMP, TAINT_MACHINE_CHECK, TAINT_BAD_PAGE don't diff --git a/kernel/panic.c b/kernel/panic.c index 12c5a0a6c89..98e2047f4db 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -155,6 +155,7 @@ EXPORT_SYMBOL(panic); * 'U' - Userspace-defined naughtiness. * 'A' - ACPI table overridden. * 'W' - Taint on warning. + * 'C' - modules from drivers/staging are loaded. * * The string is overwritten by the next call to print_taint(). */ @@ -163,7 +164,7 @@ const char *print_tainted(void) { static char buf[20]; if (tainted) { - snprintf(buf, sizeof(buf), "Tainted: %c%c%c%c%c%c%c%c%c%c", + snprintf(buf, sizeof(buf), "Tainted: %c%c%c%c%c%c%c%c%c%c%c", tainted & TAINT_PROPRIETARY_MODULE ? 'P' : 'G', tainted & TAINT_FORCED_MODULE ? 'F' : ' ', tainted & TAINT_UNSAFE_SMP ? 'S' : ' ', @@ -173,7 +174,8 @@ const char *print_tainted(void) tainted & TAINT_USER ? 'U' : ' ', tainted & TAINT_DIE ? 'D' : ' ', tainted & TAINT_OVERRIDDEN_ACPI_TABLE ? 'A' : ' ', - tainted & TAINT_WARN ? 'W' : ' '); + tainted & TAINT_WARN ? 'W' : ' ', + tainted & TAINT_CRAP ? 'C' : ' '); } else snprintf(buf, sizeof(buf), "Not tainted"); -- cgit v1.2.3-70-g09d2 From 03010a3350301baac2154fa66de925ae2981b7e3 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 10 Oct 2008 20:02:48 -0400 Subject: ext4: Rename ext4dev to ext4 The ext4 filesystem is getting stable enough that it's time to drop the "dev" prefix. Also remove the requirement for the TEST_FILESYS flag. Signed-off-by: "Theodore Ts'o" --- Documentation/filesystems/ext4.txt | 8 ++-- fs/Kconfig | 88 ++++++++++++++++++++++---------------- fs/Makefile | 2 +- fs/ext4/Makefile | 10 ++--- fs/ext4/acl.h | 6 +-- fs/ext4/ext4_i.h | 4 +- fs/ext4/file.c | 2 +- fs/ext4/inode.c | 2 +- fs/ext4/namei.c | 6 +-- fs/ext4/super.c | 63 ++++++++++++++++++--------- fs/ext4/symlink.c | 4 +- fs/ext4/xattr.c | 8 ++-- fs/ext4/xattr.h | 8 ++-- 13 files changed, 123 insertions(+), 88 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 289057958f9..74484e69640 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -32,9 +32,9 @@ Mailing list: linux-ext4@vger.kernel.org you will need to merge your changes with the version from e2fsprogs 1.41.x. - - Create a new filesystem using the ext4dev filesystem type: + - Create a new filesystem using the ext4 filesystem type: - # mke2fs -t ext4dev /dev/hda1 + # mke2fs -t ext4 /dev/hda1 Or configure an existing ext3 filesystem to support extents and set the test_fs flag to indicate that it's ok for an in-development @@ -47,13 +47,13 @@ Mailing list: linux-ext4@vger.kernel.org # tune2fs -I 256 /dev/hda1 - (Note: we currently do not have tools to convert an ext4dev + (Note: we currently do not have tools to convert an ext4 filesystem back to ext3; so please do not do try this on production filesystems.) - Mounting: - # mount -t ext4dev /dev/hda1 /wherever + # mount -t ext4 /dev/hda1 /wherever - When comparing performance with other filesystems, remember that ext3/4 by default offers higher data integrity guarantees than most. diff --git a/fs/Kconfig b/fs/Kconfig index abccb5dab9a..40183d94b68 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -136,37 +136,51 @@ config EXT3_FS_SECURITY If you are not using a security module that requires using extended attributes for file security labels, say N. -config EXT4DEV_FS - tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)" - depends on EXPERIMENTAL +config EXT4_FS + tristate "The Extended 4 (ext4) filesystem" select JBD2 select CRC16 help - Ext4dev is a predecessor filesystem of the next generation - extended fs ext4, based on ext3 filesystem code. It will be - renamed ext4 fs later, once ext4dev is mature and stabilized. + This is the next generation of the ext3 filesystem. Unlike the change from ext2 filesystem to ext3 filesystem, - the on-disk format of ext4dev is not the same as ext3 any more: - it is based on extent maps and it supports 48-bit physical block - numbers. These combined on-disk format changes will allow - ext4dev/ext4 to handle more than 16 TB filesystem volumes -- - a hard limit that ext3 cannot overcome without changing the - on-disk format. - - Other than extent maps and 48-bit block numbers, ext4dev also is - likely to have other new features such as persistent preallocation, - high resolution time stamps, and larger file support etc. These - features will be added to ext4dev gradually. + the on-disk format of ext4 is not forwards compatible with + ext3; it is based on extent maps and it supports 48-bit + physical block numbers. The ext4 filesystem also supports delayed + allocation, persistent preallocation, high resolution time stamps, + and a number of other features to improve performance and speed + up fsck time. For more information, please see the web pages at + http://ext4.wiki.kernel.org. + + The ext4 filesystem will support mounting an ext3 + filesystem; while there will be some performance gains from + the delayed allocation and inode table readahead, the best + performance gains will require enabling ext4 features in the + filesystem, or formating a new filesystem as an ext4 + filesystem initially. To compile this file system support as a module, choose M here. The module will be called ext4dev. If unsure, say N. -config EXT4DEV_FS_XATTR - bool "Ext4dev extended attributes" - depends on EXT4DEV_FS +config EXT4DEV_COMPAT + bool "Enable ext4dev compatibility" + depends on EXT4_FS + help + Starting with 2.6.28, the name of the ext4 filesystem was + renamed from ext4dev to ext4. Unfortunately there are some + lagecy userspace programs (such as klibc's fstype) have + "ext4dev" hardcoded. + + To enable backwards compatibility so that systems that are + still expecting to mount ext4 filesystems using ext4dev, + chose Y here. This feature will go away by 2.6.31, so + please arrange to get your userspace programs fixed! + +config EXT4_FS_XATTR + bool "Ext4 extended attributes" + depends on EXT4_FS default y help Extended attributes are name:value pairs associated with inodes by @@ -175,11 +189,11 @@ config EXT4DEV_FS_XATTR If unsure, say N. - You need this for POSIX ACL support on ext4dev/ext4. + You need this for POSIX ACL support on ext4. -config EXT4DEV_FS_POSIX_ACL - bool "Ext4dev POSIX Access Control Lists" - depends on EXT4DEV_FS_XATTR +config EXT4_FS_POSIX_ACL + bool "Ext4 POSIX Access Control Lists" + depends on EXT4_FS_XATTR select FS_POSIX_ACL help POSIX Access Control Lists (ACLs) support permissions for users and @@ -190,14 +204,14 @@ config EXT4DEV_FS_POSIX_ACL If you don't know what Access Control Lists are, say N -config EXT4DEV_FS_SECURITY - bool "Ext4dev Security Labels" - depends on EXT4DEV_FS_XATTR +config EXT4_FS_SECURITY + bool "Ext4 Security Labels" + depends on EXT4_FS_XATTR help Security labels support alternative access control models implemented by security modules like SELinux. This option enables an extended attribute handler for file security - labels in the ext4dev/ext4 filesystem. + labels in the ext4 filesystem. If you are not using a security module that requires using extended attributes for file security labels, say N. @@ -240,22 +254,22 @@ config JBD2 help This is a generic journaling layer for block devices that support both 32-bit and 64-bit block numbers. It is currently used by - the ext4dev/ext4 filesystem, but it could also be used to add + the ext4 filesystem, but it could also be used to add journal support to other file systems or block devices such as RAID or LVM. - If you are using ext4dev/ext4, you need to say Y here. If you are not - using ext4dev/ext4 then you will probably want to say N. + If you are using ext4, you need to say Y here. If you are not + using ext4 then you will probably want to say N. To compile this device as a module, choose M here. The module will be - called jbd2. If you are compiling ext4dev/ext4 into the kernel, + called jbd2. If you are compiling ext4 into the kernel, you cannot compile this code as a module. config JBD2_DEBUG - bool "JBD2 (ext4dev/ext4) debugging support" + bool "JBD2 (ext4) debugging support" depends on JBD2 && DEBUG_FS help - If you are using the ext4dev/ext4 journaled file system (or + If you are using the ext4 journaled file system (or potentially any other filesystem/device using JBD2), this option allows you to enable debugging output while the system is running, in order to help track down any problems you are having. @@ -270,9 +284,9 @@ config JBD2_DEBUG config FS_MBCACHE # Meta block cache for Extended Attributes (ext2/ext3/ext4) tristate - depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4DEV_FS_XATTR - default y if EXT2_FS=y || EXT3_FS=y || EXT4DEV_FS=y - default m if EXT2_FS=m || EXT3_FS=m || EXT4DEV_FS=m + depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR + default y if EXT2_FS=y || EXT3_FS=y || EXT4_FS=y + default m if EXT2_FS=m || EXT3_FS=m || EXT4_FS=m config REISERFS_FS tristate "Reiserfs support" diff --git a/fs/Makefile b/fs/Makefile index a1482a5eff1..de404b00eb0 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -69,7 +69,7 @@ obj-$(CONFIG_DLM) += dlm/ # Do not add any filesystems before this line obj-$(CONFIG_REISERFS_FS) += reiserfs/ obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3 -obj-$(CONFIG_EXT4DEV_FS) += ext4/ # Before ext2 so root fs can be ext4dev +obj-$(CONFIG_EXT4_FS) += ext4/ # Before ext2 so root fs can be ext4dev obj-$(CONFIG_JBD) += jbd/ obj-$(CONFIG_JBD2) += jbd2/ obj-$(CONFIG_EXT2_FS) += ext2/ diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile index ac6fa8ca0a2..a8ff003a00f 100644 --- a/fs/ext4/Makefile +++ b/fs/ext4/Makefile @@ -2,12 +2,12 @@ # Makefile for the linux ext4-filesystem routines. # -obj-$(CONFIG_EXT4DEV_FS) += ext4dev.o +obj-$(CONFIG_EXT4_FS) += ext4.o -ext4dev-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \ +ext4-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \ ioctl.o namei.o super.o symlink.o hash.o resize.o extents.o \ ext4_jbd2.o migrate.o mballoc.o -ext4dev-$(CONFIG_EXT4DEV_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o -ext4dev-$(CONFIG_EXT4DEV_FS_POSIX_ACL) += acl.o -ext4dev-$(CONFIG_EXT4DEV_FS_SECURITY) += xattr_security.o +ext4-$(CONFIG_EXT4_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o +ext4-$(CONFIG_EXT4_FS_POSIX_ACL) += acl.o +ext4-$(CONFIG_EXT4_FS_SECURITY) += xattr_security.o diff --git a/fs/ext4/acl.h b/fs/ext4/acl.h index 4c9948f69f8..cb45257a246 100644 --- a/fs/ext4/acl.h +++ b/fs/ext4/acl.h @@ -51,7 +51,7 @@ static inline int ext4_acl_count(size_t size) } } -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL /* Value for inode->u.ext4_i.i_acl and inode->u.ext4_i.i_default_acl if the ACL has not been cached */ @@ -62,7 +62,7 @@ extern int ext4_permission(struct inode *, int); extern int ext4_acl_chmod(struct inode *); extern int ext4_init_acl(handle_t *, struct inode *, struct inode *); -#else /* CONFIG_EXT4DEV_FS_POSIX_ACL */ +#else /* CONFIG_EXT4_FS_POSIX_ACL */ #include #define ext4_permission NULL @@ -77,5 +77,5 @@ ext4_init_acl(handle_t *handle, struct inode *inode, struct inode *dir) { return 0; } -#endif /* CONFIG_EXT4DEV_FS_POSIX_ACL */ +#endif /* CONFIG_EXT4_FS_POSIX_ACL */ diff --git a/fs/ext4/ext4_i.h b/fs/ext4/ext4_i.h index 2875eeca172..5c124c0ac6d 100644 --- a/fs/ext4/ext4_i.h +++ b/fs/ext4/ext4_i.h @@ -66,7 +66,7 @@ struct ext4_inode_info { __u32 i_state; /* Dynamic state flags for ext4 */ ext4_lblk_t i_dir_start_lookup; -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR /* * Extended attributes can be read independently of the main file * data. Taking i_mutex even when reading would cause contention @@ -76,7 +76,7 @@ struct ext4_inode_info { */ struct rw_semaphore xattr_sem; #endif -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL struct posix_acl *i_acl; struct posix_acl *i_default_acl; #endif diff --git a/fs/ext4/file.c b/fs/ext4/file.c index 6d5be156202..6bd11fba71f 100644 --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -165,7 +165,7 @@ const struct inode_operations ext4_file_inode_operations = { .truncate = ext4_truncate, .setattr = ext4_setattr, .getattr = ext4_getattr, -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR .setxattr = generic_setxattr, .getxattr = generic_getxattr, .listxattr = ext4_listxattr, diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a4747867411..9b4ec9decfd 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4041,7 +4041,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino) return inode; ei = EXT4_I(inode); -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL ei->i_acl = EXT4_ACL_NOT_CACHED; ei->i_default_acl = EXT4_ACL_NOT_CACHED; #endif diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 5295a9225cf..92db9e94514 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1773,7 +1773,7 @@ retry: err = PTR_ERR(inode); if (!IS_ERR(inode)) { init_special_inode(inode, inode->i_mode, rdev); -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR inode->i_op = &ext4_special_inode_operations; #endif err = ext4_add_nondir(handle, dentry, inode); @@ -2456,7 +2456,7 @@ const struct inode_operations ext4_dir_inode_operations = { .mknod = ext4_mknod, .rename = ext4_rename, .setattr = ext4_setattr, -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR .setxattr = generic_setxattr, .getxattr = generic_getxattr, .listxattr = ext4_listxattr, @@ -2467,7 +2467,7 @@ const struct inode_operations ext4_dir_inode_operations = { const struct inode_operations ext4_special_inode_operations = { .setattr = ext4_setattr, -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR .setxattr = generic_setxattr, .getxattr = generic_getxattr, .listxattr = ext4_listxattr, diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 7d865608e81..0e661c56966 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -569,7 +569,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb) ei = kmem_cache_alloc(ext4_inode_cachep, GFP_NOFS); if (!ei) return NULL; -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL ei->i_acl = EXT4_ACL_NOT_CACHED; ei->i_default_acl = EXT4_ACL_NOT_CACHED; #endif @@ -605,7 +605,7 @@ static void init_once(void *foo) struct ext4_inode_info *ei = (struct ext4_inode_info *) foo; INIT_LIST_HEAD(&ei->i_orphan); -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR init_rwsem(&ei->xattr_sem); #endif init_rwsem(&ei->i_data_sem); @@ -631,7 +631,7 @@ static void destroy_inodecache(void) static void ext4_clear_inode(struct inode *inode) { -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL if (EXT4_I(inode)->i_acl && EXT4_I(inode)->i_acl != EXT4_ACL_NOT_CACHED) { posix_acl_release(EXT4_I(inode)->i_acl); @@ -720,7 +720,7 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_puts(seq, ",debug"); if (test_opt(sb, OLDALLOC)) seq_puts(seq, ",oldalloc"); -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR if (test_opt(sb, XATTR_USER) && !(def_mount_opts & EXT4_DEFM_XATTR_USER)) seq_puts(seq, ",user_xattr"); @@ -729,7 +729,7 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_puts(seq, ",nouser_xattr"); } #endif -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL if (test_opt(sb, POSIX_ACL) && !(def_mount_opts & EXT4_DEFM_ACL)) seq_puts(seq, ",acl"); if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT4_DEFM_ACL)) @@ -1078,7 +1078,7 @@ static int parse_options(char *options, struct super_block *sb, case Opt_orlov: clear_opt(sbi->s_mount_opt, OLDALLOC); break; -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR case Opt_user_xattr: set_opt(sbi->s_mount_opt, XATTR_USER); break; @@ -1092,7 +1092,7 @@ static int parse_options(char *options, struct super_block *sb, "not supported\n"); break; #endif -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL case Opt_acl: set_opt(sbi->s_mount_opt, POSIX_ACL); break; @@ -1987,11 +1987,11 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) set_opt(sbi->s_mount_opt, GRPID); if (def_mount_opts & EXT4_DEFM_UID16) set_opt(sbi->s_mount_opt, NO_UID32); -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR if (def_mount_opts & EXT4_DEFM_XATTR_USER) set_opt(sbi->s_mount_opt, XATTR_USER); #endif -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL if (def_mount_opts & EXT4_DEFM_ACL) set_opt(sbi->s_mount_opt, POSIX_ACL); #endif @@ -2049,16 +2049,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) "EXT4-fs warning: feature flags set on rev 0 fs, " "running e2fsck is recommended\n"); - /* - * Since ext4 is still considered development code, we require - * that the TEST_FILESYS flag in s->flags be set. - */ - if (!(le32_to_cpu(es->s_flags) & EXT2_FLAGS_TEST_FILESYS)) { - printk(KERN_WARNING "EXT4-fs: %s: not marked " - "OK to use with test code.\n", sb->s_id); - goto failed_mount; - } - /* * Check feature flags regardless of the revision level, since we * previously didn't change the revision level when setting the flags, @@ -3580,13 +3570,34 @@ const struct file_operations ext4_ui_proc_fops = { }; #endif +static struct file_system_type ext4_fs_type = { + .owner = THIS_MODULE, + .name = "ext4", + .get_sb = ext4_get_sb, + .kill_sb = kill_block_super, + .fs_flags = FS_REQUIRES_DEV, +}; + +#ifdef CONFIG_EXT4DEV_COMPAT +static int ext4dev_get_sb(struct file_system_type *fs_type, + int flags, const char *dev_name, void *data, struct vfsmount *mnt) +{ + printk(KERN_WARNING "EXT4-fs: Update your userspace programs " + "to mount using ext4\n"); + printk(KERN_WARNING "EXT4-fs: ext4dev backwards compatibility " + "will go away by 2.6.31\n"); + return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super, mnt); +} + static struct file_system_type ext4dev_fs_type = { .owner = THIS_MODULE, .name = "ext4dev", - .get_sb = ext4_get_sb, + .get_sb = ext4dev_get_sb, .kill_sb = kill_block_super, .fs_flags = FS_REQUIRES_DEV, }; +MODULE_ALIAS("ext4dev"); +#endif static int __init init_ext4_fs(void) { @@ -3603,9 +3614,16 @@ static int __init init_ext4_fs(void) err = init_inodecache(); if (err) goto out1; - err = register_filesystem(&ext4dev_fs_type); + err = register_filesystem(&ext4_fs_type); if (err) goto out; +#ifdef CONFIG_EXT4DEV_COMPAT + err = register_filesystem(&ext4dev_fs_type); + if (err) { + unregister_filesystem(&ext4_fs_type); + goto out; + } +#endif return 0; out: destroy_inodecache(); @@ -3618,7 +3636,10 @@ out2: static void __exit exit_ext4_fs(void) { + unregister_filesystem(&ext4_fs_type); +#ifdef CONFIG_EXT4DEV_COMPAT unregister_filesystem(&ext4dev_fs_type); +#endif destroy_inodecache(); exit_ext4_xattr(); exit_ext4_mballoc(); diff --git a/fs/ext4/symlink.c b/fs/ext4/symlink.c index 0013d52f73b..00740cb32be 100644 --- a/fs/ext4/symlink.c +++ b/fs/ext4/symlink.c @@ -34,7 +34,7 @@ const struct inode_operations ext4_symlink_inode_operations = { .readlink = generic_readlink, .follow_link = page_follow_link_light, .put_link = page_put_link, -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR .setxattr = generic_setxattr, .getxattr = generic_getxattr, .listxattr = ext4_listxattr, @@ -45,7 +45,7 @@ const struct inode_operations ext4_symlink_inode_operations = { const struct inode_operations ext4_fast_symlink_inode_operations = { .readlink = generic_readlink, .follow_link = ext4_follow_link, -#ifdef CONFIG_EXT4DEV_FS_XATTR +#ifdef CONFIG_EXT4_FS_XATTR .setxattr = generic_setxattr, .getxattr = generic_getxattr, .listxattr = ext4_listxattr, diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 362b0edd3db..80626d516fe 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -99,12 +99,12 @@ static struct mb_cache *ext4_xattr_cache; static struct xattr_handler *ext4_xattr_handler_map[] = { [EXT4_XATTR_INDEX_USER] = &ext4_xattr_user_handler, -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL [EXT4_XATTR_INDEX_POSIX_ACL_ACCESS] = &ext4_xattr_acl_access_handler, [EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT] = &ext4_xattr_acl_default_handler, #endif [EXT4_XATTR_INDEX_TRUSTED] = &ext4_xattr_trusted_handler, -#ifdef CONFIG_EXT4DEV_FS_SECURITY +#ifdef CONFIG_EXT4_FS_SECURITY [EXT4_XATTR_INDEX_SECURITY] = &ext4_xattr_security_handler, #endif }; @@ -112,11 +112,11 @@ static struct xattr_handler *ext4_xattr_handler_map[] = { struct xattr_handler *ext4_xattr_handlers[] = { &ext4_xattr_user_handler, &ext4_xattr_trusted_handler, -#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL +#ifdef CONFIG_EXT4_FS_POSIX_ACL &ext4_xattr_acl_access_handler, &ext4_xattr_acl_default_handler, #endif -#ifdef CONFIG_EXT4DEV_FS_SECURITY +#ifdef CONFIG_EXT4_FS_SECURITY &ext4_xattr_security_handler, #endif NULL diff --git a/fs/ext4/xattr.h b/fs/ext4/xattr.h index 814ea58d4d5..8ede88b18c2 100644 --- a/fs/ext4/xattr.h +++ b/fs/ext4/xattr.h @@ -63,7 +63,7 @@ struct ext4_xattr_entry { EXT4_I(inode)->i_extra_isize)) #define IFIRST(hdr) ((struct ext4_xattr_entry *)((hdr)+1)) -# ifdef CONFIG_EXT4DEV_FS_XATTR +# ifdef CONFIG_EXT4_FS_XATTR extern struct xattr_handler ext4_xattr_user_handler; extern struct xattr_handler ext4_xattr_trusted_handler; @@ -88,7 +88,7 @@ extern void exit_ext4_xattr(void); extern struct xattr_handler *ext4_xattr_handlers[]; -# else /* CONFIG_EXT4DEV_FS_XATTR */ +# else /* CONFIG_EXT4_FS_XATTR */ static inline int ext4_xattr_get(struct inode *inode, int name_index, const char *name, @@ -141,9 +141,9 @@ ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize, #define ext4_xattr_handlers NULL -# endif /* CONFIG_EXT4DEV_FS_XATTR */ +# endif /* CONFIG_EXT4_FS_XATTR */ -#ifdef CONFIG_EXT4DEV_FS_SECURITY +#ifdef CONFIG_EXT4_FS_SECURITY extern int ext4_init_security(handle_t *handle, struct inode *inode, struct inode *dir); #else -- cgit v1.2.3-70-g09d2 From 5bf5683a33f3584da6eced480967c4f7e11515a8 Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Fri, 10 Oct 2008 22:12:43 -0400 Subject: ext4: add an option to control error handling on file data If the journal doesn't abort when it gets an IO error in file data blocks, the file data corruption will spread silently. Because most of applications and commands do buffered writes without fsync(), they don't notice the IO error. It's scary for mission critical systems. On the other hand, if the journal aborts whenever it gets an IO error in file data blocks, the system will easily become inoperable. So this patch introduces a filesystem option to determine whether it aborts the journal or just call printk() when it gets an IO error in file data. If you mount an ext4 fs with data_err=abort option, it aborts on file data write error. If you mount it with data_err=ignore, it doesn't abort, just call printk(). data_err=ignore is the default. Here is the corresponding patch of the ext3 version: http://kerneltrap.org/mailarchive/linux-kernel/2008/9/9/3239374 Signed-off-by: Hidehiro Kawai Signed-off-by: Theodore Ts'o --- Documentation/filesystems/ext4.txt | 5 +++++ fs/ext4/ext4.h | 2 ++ fs/ext4/super.c | 16 ++++++++++++++++ fs/jbd2/commit.c | 2 ++ include/linux/jbd2.h | 3 +++ 5 files changed, 28 insertions(+) (limited to 'Documentation') diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 74484e69640..eb154ef36c2 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -223,6 +223,11 @@ errors=remount-ro(*) Remount the filesystem read-only on an error. errors=continue Keep going on a filesystem error. errors=panic Panic and halt the machine if an error occurs. +data_err=ignore(*) Just print an error message if an error occurs + in a file data buffer in ordered mode. +data_err=abort Abort the journal if an error occurs in a file + data buffer in ordered mode. + grpid Give objects the same group ID as their creator. bsdgroups diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index f46a513a515..6690a41cdd9 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -540,6 +540,8 @@ do { \ #define EXT4_MOUNT_JOURNAL_ASYNC_COMMIT 0x1000000 /* Journal Async Commit */ #define EXT4_MOUNT_I_VERSION 0x2000000 /* i_version support */ #define EXT4_MOUNT_DELALLOC 0x8000000 /* Delalloc support */ +#define EXT4_MOUNT_DATA_ERR_ABORT 0x10000000 /* Abort on file data write */ + /* Compatibility, for having both ext2_fs.h and ext4_fs.h included at once */ #ifndef _LINUX_EXT2_FS_H #define clear_opt(o, opt) o &= ~EXT4_MOUNT_##opt diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 79bd3989e84..014677b8e22 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -778,6 +778,9 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_printf(seq, ",inode_readahead_blks=%u", sbi->s_inode_readahead_blks); + if (test_opt(sb, DATA_ERR_ABORT)) + seq_puts(seq, ",data_err=abort"); + ext4_show_quota_options(seq, sb); return 0; } @@ -907,6 +910,7 @@ enum { Opt_commit, Opt_journal_update, Opt_journal_inum, Opt_journal_dev, Opt_journal_checksum, Opt_journal_async_commit, Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback, + Opt_data_err_abort, Opt_data_err_ignore, Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota, Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota, Opt_ignore, Opt_barrier, Opt_err, Opt_resize, Opt_usrquota, @@ -953,6 +957,8 @@ static match_table_t tokens = { {Opt_data_journal, "data=journal"}, {Opt_data_ordered, "data=ordered"}, {Opt_data_writeback, "data=writeback"}, + {Opt_data_err_abort, "data_err=abort"}, + {Opt_data_err_ignore, "data_err=ignore"}, {Opt_offusrjquota, "usrjquota="}, {Opt_usrjquota, "usrjquota=%s"}, {Opt_offgrpjquota, "grpjquota="}, @@ -1187,6 +1193,12 @@ static int parse_options(char *options, struct super_block *sb, sbi->s_mount_opt |= data_opt; } break; + case Opt_data_err_abort: + set_opt(sbi->s_mount_opt, DATA_ERR_ABORT); + break; + case Opt_data_err_ignore: + clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT); + break; #ifdef CONFIG_QUOTA case Opt_usrjquota: qtype = USRQUOTA; @@ -2535,6 +2547,10 @@ static void ext4_init_journal_params(struct super_block *sb, journal_t *journal) journal->j_flags |= JBD2_BARRIER; else journal->j_flags &= ~JBD2_BARRIER; + if (test_opt(sb, DATA_ERR_ABORT)) + journal->j_flags |= JBD2_ABORT_ON_SYNCDATA_ERR; + else + journal->j_flags &= ~JBD2_ABORT_ON_SYNCDATA_ERR; spin_unlock(&journal->j_state_lock); } diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 849f10496ce..0abe02c4242 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -684,6 +684,8 @@ start_journal_io: printk(KERN_WARNING "JBD2: Detected IO errors while flushing file data " "on %s\n", journal->j_devname); + if (journal->j_flags & JBD2_ABORT_ON_SYNCDATA_ERR) + jbd2_journal_abort(journal, err); err = 0; } diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index c9e7d781db3..d2e91ea998f 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -967,6 +967,9 @@ struct journal_s #define JBD2_FLUSHED 0x008 /* The journal superblock has been flushed */ #define JBD2_LOADED 0x010 /* The journal superblock has been loaded */ #define JBD2_BARRIER 0x020 /* Use IDE barriers */ +#define JBD2_ABORT_ON_SYNCDATA_ERR 0x040 /* Abort the journal on file + * data write error in ordered + * mode */ /* * Function declarations for the journaling transaction and buffer -- cgit v1.2.3-70-g09d2 From 9bed90c6a46f10c2d3052c0585057a5cb7392b92 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 23 Aug 2008 18:54:37 +0200 Subject: Documentation: Document the RB532 specific kmac tag The Routerboard 532 bootloader passes the korina ethernet MAC adapter address to the kernel on the command line. Document this in the kernel-parameters file. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- Documentation/kernel-parameters.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 329dcabe4c5..d0fff6302f6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1014,6 +1014,10 @@ and is between 256 and 4096 characters. It is defined in the file (only serial suported for now) Format: [,baud] + kmac= [MIPS] korina ethernet MAC address. + Configure the RouterBoard 532 series on-chip + Ethernet adapter MAC address. + l2cr= [PPC] l3cr= [PPC] -- cgit v1.2.3-70-g09d2 From 8f2b7b70600212f8c809a7bc2d17d33561842440 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 5 Aug 2008 10:11:25 -0300 Subject: V4L/DVB (8626): Add support for TCL tuner MF02GIP-5N-E Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.tuner | 1 + drivers/media/common/tuners/tuner-simple.c | 2 ++ drivers/media/common/tuners/tuner-types.c | 22 ++++++++++++++++++++++ include/media/tuner.h | 1 + 4 files changed, 26 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index 0e2394695bb..30bbdda68d0 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -74,3 +74,4 @@ tuner=72 - Thomson FE6600 tuner=73 - Samsung TCPG 6121P30A tuner=75 - Philips TEA5761 FM Radio tuner=76 - Xceive 5000 tuner +tuner=77 - TCL tuner MF02GIP-5N-E diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index aa773a658a2..fc3a6a9d7c2 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -142,6 +142,7 @@ static inline int tuner_stereo(const int type, const int status) case TUNER_PHILIPS_FM1236_MK3: case TUNER_PHILIPS_FM1256_IH3: case TUNER_LG_NTSC_TAPE: + case TUNER_TCL_MF02GIP_5N: return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3); default: return status & TUNER_STEREO; @@ -494,6 +495,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer) case TUNER_PHILIPS_FMD1216ME_MK3: case TUNER_LG_NTSC_TAPE: case TUNER_PHILIPS_FM1256_IH3: + case TUNER_TCL_MF02GIP_5N: buffer[3] = 0x19; break; case TUNER_TNF_5335MF: diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index 10dddca8b5d..04961a1f44b 100644 --- a/drivers/media/common/tuners/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -1216,6 +1216,23 @@ static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = { }, }; +/* ------------ TUNER_TCL_MF02GIP-5N-E - TCL MF02GIP-5N ------------ */ + +static struct tuner_range tuner_tcl_mf02gip_5n_ntsc_ranges[] = { + { 16 * 172.00 /*MHz*/, 0x8e, 0x01, }, + { 16 * 448.00 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x04, }, +}; + +static struct tuner_params tuner_tcl_mf02gip_5n_params[] = { + { + .type = TUNER_PARAM_TYPE_NTSC, + .ranges = tuner_tcl_mf02gip_5n_ntsc_ranges, + .count = ARRAY_SIZE(tuner_tcl_mf02gip_5n_ntsc_ranges), + .cb_first_if_lower_freq = 1, + }, +}; + /* --------------------------------------------------------------------- */ struct tunertype tuners[] = { @@ -1641,6 +1658,11 @@ struct tunertype tuners[] = { .name = "Xceive 5000 tuner", /* see xc5000.c for details */ }, + [TUNER_TCL_MF02GIP_5N] = { /* TCL tuner MF02GIP-5N-E */ + .name = "TCL tuner MF02GIP-5N-E", + .params = tuner_tcl_mf02gip_5n_params, + .count = ARRAY_SIZE(tuner_tcl_mf02gip_5n_params), + }, }; EXPORT_SYMBOL(tuners); diff --git a/include/media/tuner.h b/include/media/tuner.h index 77068fcc86b..ba818985cc8 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -122,6 +122,7 @@ #define TUNER_TDA9887 74 /* This tuner should be used only internally */ #define TUNER_TEA5761 75 /* Only FM Radio Tuner */ #define TUNER_XC5000 76 /* Xceive Silicon Tuner */ +#define TUNER_TCL_MF02GIP_5N 77 /* TCL MF02GIP_5N */ /* tv card specific */ #define TDA9887_PRESENT (1<<0) -- cgit v1.2.3-70-g09d2 From 7d341a6a52f115512d60b2de89b2ebde54da8eff Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 5 Aug 2008 10:14:13 -0300 Subject: V4L/DVB (8628): bttv: Add support for Encore ENLTV2-FM Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.bttv | 1 + drivers/media/common/ir-keymaps.c | 55 +++++++++++++++++++++++++++-- drivers/media/video/bt8xx/bttv-cards.c | 27 +++++++++++++- drivers/media/video/bt8xx/bttv-input.c | 62 +++++++++++++++++++++++++++++++-- drivers/media/video/bt8xx/bttv.h | 2 +- include/media/ir-common.h | 1 + 6 files changed, 140 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv index f32efb6fb12..60ba6683603 100644 --- a/Documentation/video4linux/CARDLIST.bttv +++ b/Documentation/video4linux/CARDLIST.bttv @@ -150,3 +150,4 @@ 149 -> Typhoon TV-Tuner PCI (50684) 150 -> Geovision GV-600 [008a:763c] 151 -> Kozumi KTV-01C +152 -> Encore ENL TV-FM-2 [1000:1801] diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index 8fa91f846d5..aedfabd5738 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -1792,12 +1792,61 @@ IR_KEYTAB_TYPE ir_codes_encore_enltv[IR_KEYTAB_SIZE] = { [ 0x41 ] = KEY_GREEN, /* AP2 */ [ 0x47 ] = KEY_YELLOW, /* AP3 */ [ 0x57 ] = KEY_BLUE, /* AP4 */ - - }; - EXPORT_SYMBOL_GPL(ir_codes_encore_enltv); +/* Encore ENLTV2-FM - silver plastic - "Wand Media" written at the botton + Mauro Carvalho Chehab */ +IR_KEYTAB_TYPE ir_codes_encore_enltv2[IR_KEYTAB_SIZE] = { + [0x4c] = KEY_POWER2, + [0x4a] = KEY_TUNER, + [0x40] = KEY_1, + [0x60] = KEY_2, + [0x50] = KEY_3, + [0x70] = KEY_4, + [0x48] = KEY_5, + [0x68] = KEY_6, + [0x58] = KEY_7, + [0x78] = KEY_8, + [0x44] = KEY_9, + [0x54] = KEY_0, + + [0x64] = KEY_LAST, /* +100 */ + [0x4e] = KEY_AGAIN, /* Recall */ + + [0x6c] = KEY_SWITCHVIDEOMODE, /* Video Source */ + [0x5e] = KEY_MENU, + [0x56] = KEY_SCREEN, + [0x7a] = KEY_SETUP, + + [0x46] = KEY_MUTE, + [0x5c] = KEY_MODE, /* Stereo */ + [0x74] = KEY_INFO, + [0x7c] = KEY_CLEAR, + + [0x55] = KEY_UP, + [0x49] = KEY_DOWN, + [0x7e] = KEY_LEFT, + [0x59] = KEY_RIGHT, + [0x6a] = KEY_ENTER, + + [0x42] = KEY_VOLUMEUP, + [0x62] = KEY_VOLUMEDOWN, + [0x52] = KEY_CHANNELUP, + [0x72] = KEY_CHANNELDOWN, + + [0x41] = KEY_RECORD, + [0x51] = KEY_SHUFFLE, /* Snapshot */ + [0x75] = KEY_TIME, /* Timeshift */ + [0x71] = KEY_TV2, /* PIP */ + + [0x45] = KEY_REWIND, + [0x6f] = KEY_PAUSE, + [0x7d] = KEY_FORWARD, + [0x79] = KEY_STOP, +}; +EXPORT_SYMBOL_GPL(ir_codes_encore_enltv2); + /* for the Technotrend 1500 bundled remotes (grey and black): */ IR_KEYTAB_TYPE ir_codes_tt_1500[IR_KEYTAB_SIZE] = { [ 0x01 ] = KEY_POWER, diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 6081edc362d..13742b0bbe3 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -305,7 +305,7 @@ static struct CARD { { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, - + { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, { 0, -1, NULL } }; @@ -3037,6 +3037,31 @@ struct tvcard bttv_tvcards[] = { .has_radio = 1, .has_remote = 1, }, + [BTTV_BOARD_ENLTV_FM_2] = { + /* Encore TV Tuner Pro ENL TV-FM-2 + Mauro Carvalho Chehab IR disabled + bit 18/17 = 00 -> mute + 01 -> enable external audio input + 10 -> internal audio input (mono?) + 11 -> internal audio input + */ + .gpiomask = 0x060040, + .muxsel = { 2, 3, 3 }, + .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 }, + .gpiomute = 0, + .tuner_type = TUNER_TCL_MF02GIP_5N, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + .has_remote = 1, + } }; static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c index a38af98f4ca..2f289d981fe 100644 --- a/drivers/media/video/bt8xx/bttv-input.c +++ b/drivers/media/video/bt8xx/bttv-input.c @@ -28,8 +28,8 @@ #include "bttvp.h" -static int debug; -module_param(debug, int, 0644); /* debug level (0,1,2) */ +static int ir_debug; +module_param(ir_debug, int, 0644); static int repeat_delay = 500; module_param(repeat_delay, int, 0644); static int repeat_period = 33; @@ -40,6 +40,12 @@ module_param(ir_rc5_remote_gap, int, 0644); static int ir_rc5_key_timeout = 200; module_param(ir_rc5_key_timeout, int, 0644); +#undef dprintk +#define dprintk(arg...) do { \ + if (ir_debug >= 1) \ + printk(arg); \ +} while (0) + #define DEVNAME "bttv-input" /* ---------------------------------------------------------------------- */ @@ -79,6 +85,45 @@ static void ir_handle_key(struct bttv *btv) } +static void ir_enltv_handle_key(struct bttv *btv) +{ + struct card_ir *ir = btv->remote; + u32 gpio, data, keyup; + + /* read gpio value */ + gpio = bttv_gpio_read(&btv->c); + + /* extract data */ + data = ir_extract_bits(gpio, ir->mask_keycode); + + /* Check if it is keyup */ + keyup = (gpio & ir->mask_keyup) ? 1 << 31 : 0; + + if ((ir->last_gpio & 0x7f) != data) { + dprintk(KERN_INFO DEVNAME ": gpio=0x%x code=%d | %s\n", + gpio, data, + (gpio & ir->mask_keyup) ? " up" : "up/down"); + + ir_input_keydown(ir->dev, &ir->ir, data, data); + if (keyup) + ir_input_nokey(ir->dev, &ir->ir); + } else { + if ((ir->last_gpio & 1 << 31) == keyup) + return; + + dprintk(KERN_INFO DEVNAME ":(cnt) gpio=0x%x code=%d | %s\n", + gpio, data, + (gpio & ir->mask_keyup) ? " up" : "down"); + + if (keyup) + ir_input_nokey(ir->dev, &ir->ir); + else + ir_input_keydown(ir->dev, &ir->ir, data, data); + } + + ir->last_gpio = data | keyup; +} + void bttv_input_irq(struct bttv *btv) { struct card_ir *ir = btv->remote; @@ -92,7 +137,10 @@ static void bttv_input_timer(unsigned long data) struct bttv *btv = (struct bttv*)data; struct card_ir *ir = btv->remote; - ir_handle_key(btv); + if (btv->c.type == BTTV_BOARD_ENLTV_FM_2) + ir_enltv_handle_key(btv); + else + ir_handle_key(btv); mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling)); } @@ -284,6 +332,14 @@ int bttv_input_init(struct bttv *btv) ir->mask_keyup = 0x006000; ir->polling = 50; /* ms */ break; + case BTTV_BOARD_ENLTV_FM_2: + ir_codes = ir_codes_encore_enltv2; + ir->mask_keycode = 0x00fd00; + ir->mask_keyup = 0x000080; + ir->polling = 1; /* ms */ + ir->last_gpio = ir_extract_bits(bttv_gpio_read(&btv->c), + ir->mask_keycode); + break; } if (NULL == ir_codes) { dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n", btv->c.type); diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index 6d93d16c96e..46cb90e0985 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -176,7 +176,7 @@ #define BTTV_BOARD_TYPHOON_TVTUNERPCI 0x95 #define BTTV_BOARD_GEOVISION_GV600 0x96 #define BTTV_BOARD_KOZUMI_KTV_01C 0x97 - +#define BTTV_BOARD_ENLTV_FM_2 0x98 /* more card-specific defines */ #define PT2254_L_CHANNEL 0x10 diff --git a/include/media/ir-common.h b/include/media/ir-common.h index f5566d43894..6f8ef35de4a 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -144,6 +144,7 @@ extern IR_KEYTAB_TYPE ir_codes_proteus_2309[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_budget_ci_old[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_asus_pc39[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_encore_enltv[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_encore_enltv2[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_tt_1500[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_fusionhdtv_mce[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_behold[IR_KEYTAB_SIZE]; -- cgit v1.2.3-70-g09d2 From aef2d186e381816733fa15d67ad63bd99254cb9e Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 4 Aug 2008 21:39:53 -0300 Subject: V4L/DVB (8644): Add support for DViCO FusionHDTV DVB-T Dual Express Add support for the DViCO FusionHDTV DVB-T Dual Express card, based on work by Chris Pascoe and Stephen Backway. Signed-off-by: Steven Toth Signed-off-by: Anton Blanchard Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 1 + drivers/media/video/cx23885/cx23885-cards.c | 24 ++++++++++++++++++++ drivers/media/video/cx23885/cx23885-dvb.c | 34 +++++++++++++++++++++++++++++ drivers/media/video/cx23885/cx23885.h | 1 + 4 files changed, 60 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index f0e613ba55b..bccafd35785 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -9,3 +9,4 @@ 8 -> Hauppauge WinTV-HVR1700 [0070:8101] 9 -> Hauppauge WinTV-HVR1400 [0070:8010] 10 -> DViCO FusionHDTV7 Dual Express [18ac:d618] + 11 -> DViCO FusionHDTV DVB-T Dual Express [18ac:db78] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 93ad7f8ce20..7caa2465e7f 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -149,6 +149,11 @@ struct cx23885_board cx23885_boards[] = { .portb = CX23885_MPEG_DVB, .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = { + .name = "DViCO FusionHDTV DVB-T Dual Express", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -220,6 +225,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x18ac, .subdevice = 0xd618, .card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdb78, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -340,6 +349,7 @@ static int cx23885_tuner_callback(struct cx23885_dev *dev, int port, bitmask = 0x04; break; case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: if (command == 0) { /* Two identical tuners on two different i2c buses, @@ -476,6 +486,19 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) /* GPIO-2 xc5000 tuner reset i2c bus 1 */ /* GPIO-3 s5h1409 demod reset i2c bus 0 */ + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x000f0000); + mdelay(20); + cx_clear(GP0_IO, 0x0000000f); + mdelay(20); + cx_set(GP0_IO, 0x000f000f); + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + /* GPIO-0 portb xc3028 reset */ + /* GPIO-1 portb zl10353 reset */ + /* GPIO-2 portc xc3028 reset */ + /* GPIO-3 portc zl10353 reset */ + /* Put the parts into reset and back */ cx_set(GP0_IO, 0x000f0000); mdelay(20); @@ -534,6 +557,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) switch (dev->board) { case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 45670051e7d..dbbbf5b0d2e 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -42,6 +42,7 @@ #include "tuner-simple.h" #include "dib7000p.h" #include "dibx000_common.h" +#include "zl10353.h" static unsigned int debug; @@ -303,6 +304,12 @@ static struct dib7000p_config hauppauge_hvr1400_dib7000_config = { .output_mode = OUTMODE_MPEG2_SERIAL, }; +static struct zl10353_config dvico_fusionhdtv_xc3028 = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -465,6 +472,33 @@ static int dvb_register(struct cx23885_tsport *port) &i2c_bus->i2c_adap, &dvico_xc5000_tunerconfig, i2c_bus); break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: { + i2c_bus = &dev->i2c_bus[port->nr - 1]; + + port->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (port->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &i2c_bus->i2c_adap, + .i2c_addr = 0x61, + .video_dev = port, + .callback = cx23885_xc3028_tuner_callback, + }; + static struct xc2028_ctrl ctl = { + .fname = "xc3028-v27.fw", + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + }; + + fe = dvb_attach(xc2028_attach, port->dvb.frontend, + &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + } default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 64827fb669a..08b4c1390e1 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -64,6 +64,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1700 8 #define CX23885_BOARD_HAUPPAUGE_HVR1400 9 #define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10 +#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\ -- cgit v1.2.3-70-g09d2 From 28531558006d5c525b19a207a7ab4ec0643191c9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 29 Aug 2008 15:16:31 -0300 Subject: V4L/DVB (8799): soc-camera: add API documentation Signed-off-by: Guennadi Liakhovetski Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/soc-camera.txt | 120 +++++++++++++++++++++++++++++++ 1 file changed, 120 insertions(+) create mode 100644 Documentation/video4linux/soc-camera.txt (limited to 'Documentation') diff --git a/Documentation/video4linux/soc-camera.txt b/Documentation/video4linux/soc-camera.txt new file mode 100644 index 00000000000..178ef3c5e57 --- /dev/null +++ b/Documentation/video4linux/soc-camera.txt @@ -0,0 +1,120 @@ + Soc-Camera Subsystem + ==================== + +Terminology +----------- + +The following terms are used in this document: + - camera / camera device / camera sensor - a video-camera sensor chip, capable + of connecting to a variety of systems and interfaces, typically uses i2c for + control and configuration, and a parallel or a serial bus for data. + - camera host - an interface, to which a camera is connected. Typically a + specialised interface, present on many SoCs, e.g., PXA27x and PXA3xx, SuperH, + AVR32, i.MX27, i.MX31. + - camera host bus - a connection between a camera host and a camera. Can be + parallel or serial, consists of data and control lines, e.g., clock, vertical + and horizontal synchronization signals. + +Purpose of the soc-camera subsystem +----------------------------------- + +The soc-camera subsystem provides a unified API between camera host drivers and +camera sensor drivers. It implements a V4L2 interface to the user, currently +only the mmap method is supported. + +This subsystem has been written to connect drivers for System-on-Chip (SoC) +video capture interfaces with drivers for CMOS camera sensor chips to enable +the reuse of sensor drivers with various hosts. The subsystem has been designed +to support multiple camera host interfaces and multiple cameras per interface, +although most applications have only one camera sensor. + +Existing drivers +---------------- + +As of 2.6.27-rc4 there are two host drivers in the mainline: pxa_camera.c for +PXA27x SoCs and sh_mobile_ceu_camera.c for SuperH SoCs, and four sensor drivers: +mt9m001.c, mt9m111.c, mt9v022.c and a generic soc_camera_platform.c driver. This +list is not supposed to be updated, look for more examples in your tree. + +Camera host API +--------------- + +A host camera driver is registered using the + +soc_camera_host_register(struct soc_camera_host *); + +function. The host object can be initialized as follows: + +static struct soc_camera_host pxa_soc_camera_host = { + .drv_name = PXA_CAM_DRV_NAME, + .ops = &pxa_soc_camera_host_ops, +}; + +All camera host methods are passed in a struct soc_camera_host_ops: + +static struct soc_camera_host_ops pxa_soc_camera_host_ops = { + .owner = THIS_MODULE, + .add = pxa_camera_add_device, + .remove = pxa_camera_remove_device, + .suspend = pxa_camera_suspend, + .resume = pxa_camera_resume, + .set_fmt_cap = pxa_camera_set_fmt_cap, + .try_fmt_cap = pxa_camera_try_fmt_cap, + .init_videobuf = pxa_camera_init_videobuf, + .reqbufs = pxa_camera_reqbufs, + .poll = pxa_camera_poll, + .querycap = pxa_camera_querycap, + .try_bus_param = pxa_camera_try_bus_param, + .set_bus_param = pxa_camera_set_bus_param, +}; + +.add and .remove methods are called when a sensor is attached to or detached +from the host, apart from performing host-internal tasks they shall also call +sensor driver's .init and .release methods respectively. .suspend and .resume +methods implement host's power-management functionality and its their +responsibility to call respective sensor's methods. .try_bus_param and +.set_bus_param are used to negotiate physical connection parameters between the +host and the sensor. .init_videobuf is called by soc-camera core when a +video-device is opened, further video-buffer management is implemented completely +by the specific camera host driver. The rest of the methods are called from +respective V4L2 operations. + +Camera API +---------- + +Sensor drivers can use struct soc_camera_link, typically provided by the +platform, and used to specify to which camera host bus the sensor is connected, +and arbitrarily provide platform .power and .reset methods for the camera. +soc_camera_device_register() and soc_camera_device_unregister() functions are +used to add a sensor driver to or remove one from the system. The registration +function takes a pointer to struct soc_camera_device as the only parameter. +This struct can be initialized as follows: + + /* link to driver operations */ + icd->ops = &mt9m001_ops; + /* link to the underlying physical (e.g., i2c) device */ + icd->control = &client->dev; + /* window geometry */ + icd->x_min = 20; + icd->y_min = 12; + icd->x_current = 20; + icd->y_current = 12; + icd->width_min = 48; + icd->width_max = 1280; + icd->height_min = 32; + icd->height_max = 1024; + icd->y_skip_top = 1; + /* camera bus ID, typically obtained from platform data */ + icd->iface = icl->bus_id; + +struct soc_camera_ops provides .probe and .remove methods, which are called by +the soc-camera core, when a camera is matched against or removed from a camera +host bus, .init, .release, .suspend, and .resume are called from the camera host +driver as discussed above. Other members of this struct provide respective V4L2 +functionality. + +struct soc_camera_device also links to an array of struct soc_camera_data_format, +listing pixel formats, supported by the camera. + +-- +Author: Guennadi Liakhovetski -- cgit v1.2.3-70-g09d2 From 4c56b04af67211c4311dd9961ce5aba86b96ba9c Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Tue, 12 Aug 2008 13:30:03 -0300 Subject: V4L/DVB (8807): Add DVB support for the Leadtek Winfast PxDVR3200 H This patch is on behalf of Stephen Backway , and represents two patches I received (and some subsequent whitespace cleanup I had due to how I pulled the patches). From the original author: a) Add DVB support for the Leadtek Winfast PxDVR3200 H. b) The tuner callback previously checked the command 3 times: 1) To see if it was the XC2028_RESET_CLK 2) To see if it was not the XC2028_RESET_TUNER 3) To see if it was the XC2028_RESET_TUNER This patch removes the third check. Signed-off-by: Steven Toth Signed-off-by: Stephen Backway Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 1 + drivers/media/video/cx23885/Kconfig | 1 + drivers/media/video/cx23885/cx23885-cards.c | 42 +++++++++++++++++++++-------- drivers/media/video/cx23885/cx23885-dvb.c | 26 ++++++++++++++++++ drivers/media/video/cx23885/cx23885.h | 1 + 5 files changed, 60 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index bccafd35785..64823ccacd6 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -10,3 +10,4 @@ 9 -> Hauppauge WinTV-HVR1400 [0070:8010] 10 -> DViCO FusionHDTV7 Dual Express [18ac:d618] 11 -> DViCO FusionHDTV DVB-T Dual Express [18ac:db78] + 12 -> Leadtek Winfast PxDVR3200 H [107d:6681] diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index e60bd31b51a..8c1b7fa47a4 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -15,6 +15,7 @@ config VIDEO_CX23885 select DVB_S5H1409 if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 0daffc3dbec..ccea8de7c7d 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -154,6 +154,10 @@ struct cx23885_board cx23885_boards[] = { .portb = CX23885_MPEG_DVB, .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = { + .name = "Leadtek Winfast PxDVR3200 H", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -229,6 +233,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x18ac, .subdevice = 0xdb78, .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP, + }, { + .subvendor = 0x107d, + .subdevice = 0x6681, + .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -348,21 +356,18 @@ int cx23885_tuner_callback(void *priv, int command, int arg) case CX23885_BOARD_HAUPPAUGE_HVR1400: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: /* Tuner Reset Command */ - if (command == 0) - bitmask = 0x04; + bitmask = 0x04; break; case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: - if (command == 0) { - - /* Two identical tuners on two different i2c buses, - * we need to reset the correct gpio. */ - if (port->nr == 0) - bitmask = 0x01; - else if (port->nr == 1) - bitmask = 0x04; - } + /* Two identical tuners on two different i2c buses, + * we need to reset the correct gpio. */ + if (port->nr == 0) + bitmask = 0x01; + else if (port->nr == 1) + bitmask = 0x04; break; } @@ -491,6 +496,19 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) mdelay(20); cx_set(GP0_IO, 0x000f000f); break; + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + /* GPIO-2 xc3028 tuner reset */ + + /* The following GPIO's are on the internal AVCore (cx25840) */ + /* GPIO-? zl10353 demod reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00040000); + mdelay(20); + cx_clear(GP0_IO, 0x00000004); + mdelay(20); + cx_set(GP0_IO, 0x00040004); + break; } } @@ -578,6 +596,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ @@ -591,6 +610,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: request_module("cx25840"); break; } diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index f8564bb0d42..b85cb39b101 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -501,6 +501,32 @@ static int dvb_register(struct cx23885_tsport *port) } break; } + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + i2c_bus = &dev->i2c_bus[0]; + + port->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (port->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_bus[1].i2c_adap, + .i2c_addr = 0x61, + .video_dev = port, + .callback = cx23885_tuner_callback, + }; + static struct xc2028_ctrl ctl = { + .fname = "xc3028-v27.fw", + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + }; + + fe = dvb_attach(xc2028_attach, port->dvb.frontend, + &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index db52d814a97..4e0fcb3f7fc 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -65,6 +65,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1400 9 #define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10 #define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11 +#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\ -- cgit v1.2.3-70-g09d2 From d654dca7bca79dd3981267e398b6a7df34d3d047 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 6 Sep 2008 04:18:48 -0300 Subject: V4L/DVB (8927): gspca: PAC 207 webcam 093a:2476 added. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac207.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 9a3e4d797fa..89fed5c5add 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -181,6 +181,7 @@ pac207 093a:2468 PAC207 pac207 093a:2470 Genius GF112 pac207 093a:2471 Genius VideoCam ge111 pac207 093a:2472 Genius VideoCam ge110 +pac207 093a:2476 Genius e-Messenger 112 pac7311 093a:2600 PAC7311 Typhoon pac7311 093a:2601 Philips SPC 610 NC pac7311 093a:2603 PAC7312 diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index 83b5f740c94..34e923d00b7 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -534,6 +534,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2470)}, {USB_DEVICE(0x093a, 0x2471)}, {USB_DEVICE(0x093a, 0x2472)}, + {USB_DEVICE(0x093a, 0x2476)}, {USB_DEVICE(0x2001, 0xf115)}, {} }; -- cgit v1.2.3-70-g09d2 From 7b537391dde35d7f412417a95f02f89af08dd2d3 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sun, 7 Sep 2008 11:56:49 -0300 Subject: V4L/DVB (8929): gspca: sonixj webcam 0458:702e added. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/sonixj.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 89fed5c5add..308ce4ee23d 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -42,6 +42,7 @@ zc3xx 0458:7007 Genius VideoCam V2 zc3xx 0458:700c Genius VideoCam V3 zc3xx 0458:700f Genius VideoCam Web V2 sonixj 0458:7025 Genius Eye 311Q +sonixj 0458:702e Genius Slim 310 NB sonixj 045e:00f5 MicroSoft VX3000 sonixj 045e:00f7 MicroSoft VX1000 ov519 045e:028c Micro$oft xbox cam diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 572b0f363b6..cd961cad4f9 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1567,6 +1567,7 @@ static const struct sd_desc sd_desc = { static const __devinitdata struct usb_device_id device_table[] = { #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0458, 0x7025), BSI(SN9C120, MI0360, 0x5d)}, + {USB_DEVICE(0x0458, 0x702e), BSI(SN9C120, OV7660, 0x21)}, {USB_DEVICE(0x045e, 0x00f5), BSI(SN9C105, OV7660, 0x21)}, {USB_DEVICE(0x045e, 0x00f7), BSI(SN9C105, OV7660, 0x21)}, {USB_DEVICE(0x0471, 0x0327), BSI(SN9C105, MI0360, 0x5d)}, -- cgit v1.2.3-70-g09d2 From a50f4a444a14a116e2eb077e01c2eaf58ddb7c6a Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Mon, 8 Sep 2008 03:23:55 -0300 Subject: V4L/DVB (8936): em28xx-cards: Add vendor/product id for EM2820_BOARD_PROLINK_PLAYTV_USB2 Added vendor/product id for EM2820_BOARD_PROLINK_PLAYTV_USB2 Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 4 ++-- drivers/media/video/em28xx/em28xx-cards.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 53449cb99b1..187cc48d092 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -1,5 +1,5 @@ 0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800] - 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] + 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201] @@ -12,7 +12,7 @@ 11 -> Terratec Hybrid XS (em2880) [0ccd:0042] 12 -> Kworld PVR TV 2800 RF (em2820/em2840) 13 -> Terratec Prodigy XS (em2880) [0ccd:0047] - 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) + 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) [eb1a:2821] 15 -> V-Gear PocketTV (em2800) 16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b,2040:651f] 17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index de943cf6c16..01804fac6aa 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1101,7 +1101,7 @@ struct usb_device_id em28xx_id_table [] = { { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2821), - .driver_info = EM2820_BOARD_UNKNOWN }, + .driver_info = EM2820_BOARD_PROLINK_PLAYTV_USB2 }, { USB_DEVICE(0xeb1a, 0x2860), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2861), -- cgit v1.2.3-70-g09d2 From 5bd1b66359437864e6b46420ba6770c2b1c4362c Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 4 Sep 2008 01:17:33 -0300 Subject: V4L/DVB (8987): cx88: Add support for the Hauppauge HVR4000 and HVR4000-LITE (S2) boards Adding support for Hauppauge's cx88 S2 based products, based on the cx24116 DVB-S2 demodulator. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx88 | 2 + drivers/media/video/cx88/cx88-cards.c | 79 +++++++++++++++++++++++++++++++++ drivers/media/video/cx88/cx88-dvb.c | 42 ++++++++++++++++++ drivers/media/video/cx88/cx88-input.c | 4 ++ drivers/media/video/cx88/cx88.h | 2 + 5 files changed, 129 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 7cf5685d364..c95a2fb70c3 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -66,3 +66,5 @@ 65 -> DViCO FusionHDTV 7 Gold [18ac:d610] 66 -> Prolink Pixelview MPEG 8000GT [1554:4935] 67 -> Kworld PlusTV HD PCI 120 (ATSC 120) [17de:08c1] + 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902] + 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index de199a206a1..538967e3228 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1664,6 +1664,51 @@ static const struct cx88_board cx88_boards[] = { }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_HAUPPAUGE_HVR4000] = { + .name = "Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + /* + * GPIO0 (WINTV2000) + * + * Analogue SAT DVB-T + * Antenna 0xc4bf 0xc4bb + * Composite 0xc4bf 0xc4bb + * S-Video 0xc4bf 0xc4bb + * Composite1 0xc4ff 0xc4fb + * S-Video1 0xc4ff 0xc4fb + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xc4bf, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xc4bf, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xc4bf, + } }, + /* fixme: Add radio support */ + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_HAUPPAUGE_HVR4000LITE] = { + .name = "Hauppauge WinTV-HVR4000(Lite) DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -2013,6 +2058,26 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x17de, .subdevice = 0x08c1, .card = CX88_BOARD_KWORLD_ATSC_120, + }, { + .subvendor = 0x0070, + .subdevice = 0x6900, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6904, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6902, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6905, + .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE, + }, { + .subvendor = 0x0070, + .subdevice = 0x6906, + .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE, }, }; @@ -2065,6 +2130,13 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data) case 14669: /* WinTV-HVR3000 (OEM, no IR, no b/panel video - Low profile) */ case 28552: /* WinTV-PVR 'Roslyn' (No IR) */ case 34519: /* WinTV-PCI-FM */ + case 69009: + /* WinTV-HVR4000 (DVBS/S2/T, Video and IR, back panel inputs) */ + case 69100: /* WinTV-HVR4000LITE (DVBS/S2, IR) */ + case 69500: /* WinTV-HVR4000LITE (DVBS/S2, No IR) */ + case 69559: + /* WinTV-HVR4000 (DVBS/S2/T, Video no IR, back panel inputs) */ + case 69569: /* WinTV-HVR4000 (DVBS/S2/T, Video no IR) */ case 90002: /* Nova-T-PCI (9002) */ case 92001: /* Nova-S-Plus (Video and IR) */ case 92002: /* Nova-S-Plus (Video and IR) */ @@ -2415,6 +2487,11 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) /* Enable the xc5000 tuner */ cx_set(MO_GP0_IO, 0x00001010); break; + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: + /* Init GPIO to allow tuner to attach */ + cx_write(MO_GP0_IO, 0x0000c4bf); + udelay(1000); } } @@ -2489,6 +2566,8 @@ static void cx88_card_setup(struct cx88_core *core) case CX88_BOARD_HAUPPAUGE_HVR1100LP: case CX88_BOARD_HAUPPAUGE_HVR3000: case CX88_BOARD_HAUPPAUGE_HVR1300: + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: if (0 == core->i2c_rc) hauppauge_eeprom(core, eeprom); break; diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 9f0e5b3c515..7a5a4a2c69c 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -48,6 +48,7 @@ #include "tuner-simple.h" #include "tda9887.h" #include "s5h1411.h" +#include "cx24116.h" MODULE_DESCRIPTION("driver for cx2388x based DVB cards"); MODULE_AUTHOR("Chris Pascoe "); @@ -518,6 +519,35 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev) return 0; } +static int cx24116_set_ts_param(struct dvb_frontend *fe, + int is_punctured) +{ + struct cx8802_dev *dev = fe->dvb->priv; + dev->ts_gen_cntrl = 0x2; + + return 0; +} + +static int cx24116_reset_device(struct dvb_frontend *fe) +{ + struct cx8802_dev *dev = fe->dvb->priv; + struct cx88_core *core = dev->core; + + /* Reset the part */ + cx_write(MO_SRST_IO, 0); + msleep(10); + cx_write(MO_SRST_IO, 1); + msleep(10); + + return 0; +} + +static struct cx24116_config hauppauge_hvr4000_config = { + .demod_address = 0x05, + .set_ts_params = cx24116_set_ts_param, + .reset_device = cx24116_reset_device, +}; + static int dvb_register(struct cx8802_dev *dev) { struct cx88_core *core = dev->core; @@ -876,6 +906,18 @@ static int dvb_register(struct cx8802_dev *dev) goto frontend_detach; } break; + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: + /* Support for DVB-S only, not DVB-T support */ + dev->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &dev->core->i2c_adap); + if (dev->dvb.frontend) { + dvb_attach(isl6421_attach, dev->dvb.frontend, + &dev->core->i2c_adap, + 0x08, 0x00, 0x00); + } + break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", core->name); diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 53526d997a4..097081eb505 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -224,6 +224,8 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: ir_codes = ir_codes_hauppauge_new; ir_type = IR_TYPE_RC5; ir->sampling = 1; @@ -462,6 +464,8 @@ void cx88_ir_irq(struct cx88_core *core) case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR3000: case CX88_BOARD_PINNACLE_PCTV_HD_800i: + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7); ir_dprintk("biphase decoded: %x\n", ircode); if ((ircode & 0xfffff000) != 0x3000) diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 54fe6509471..edcdabaf7bc 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -221,6 +221,8 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD 65 #define CX88_BOARD_PROLINK_PV_8000GT 66 #define CX88_BOARD_KWORLD_ATSC_120 67 +#define CX88_BOARD_HAUPPAUGE_HVR4000 68 +#define CX88_BOARD_HAUPPAUGE_HVR4000LITE 69 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v1.2.3-70-g09d2 From 2cf801e3e38f649d25fe3b4e236976f45e26289f Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 8 Sep 2008 12:07:06 -0300 Subject: V4L/DVB (8990): S2API: DVB-S/S2 voltage selection bug fix Thanks to Hans Werner for finding the problem. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx88 | 1 + drivers/media/dvb/dvb-core/dvb_frontend.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index c95a2fb70c3..b51485c1631 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -68,3 +68,4 @@ 67 -> Kworld PlusTV HD PCI 120 (ATSC 120) [17de:08c1] 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902] 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906] + 70 -> TeVii S460 DVB-S/S2 [D460:9022] diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 86af06cf578..620c6208402 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1290,7 +1290,7 @@ int tv_property_process(struct dvb_frontend *fe, tv_property_t *tvp, case TV_SET_VOLTAGE: fe->tv_property_cache.voltage = tvp->u.data; r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_VOLTAGE, - &fe->tv_property_cache.voltage); + (void *)fe->tv_property_cache.voltage); break; case TV_GET_VOLTAGE: tvp->u.data = fe->tv_property_cache.voltage; -- cgit v1.2.3-70-g09d2 From 5bacea3b9db1b88eeae5427f41efe65138f056da Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 22 Sep 2008 01:45:01 -0300 Subject: V4L/DVB (9021): S2API: Add Kconf dependency Patch provided by Darron Broad Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx88 | 2 ++ drivers/media/video/cx88/Kconfig | 1 + 2 files changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index b51485c1631..8fea2975410 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -69,3 +69,5 @@ 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902] 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906] 70 -> TeVii S460 DVB-S/S2 [D460:9022] + 71 -> Omicom SS4 DVB-S/S2 PCI [A044:2011] + 72 -> TBS 8920 DVB-S/S2 [8920:8888] diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 9dd7bdf659b..4f65ce3088b 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -58,6 +58,7 @@ config VIDEO_CX88_DVB select DVB_ISL6421 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE + select DVB_CX24116 if !DVB_FE_CUSTOMISE ---help--- This adds support for DVB/ATSC cards based on the Conexant 2388x chip. -- cgit v1.2.3-70-g09d2 From 301e9d64e0bb00c557d9385474cc9d79db0485d9 Mon Sep 17 00:00:00 2001 From: hermann pitton Date: Sun, 14 Sep 2008 17:49:14 -0300 Subject: V4L/DVB (9028): saa7134: add support for the triple Asus Tiger 3in1 after looking it up, all rants about the 80 columns restriction seem to be in vain. After changing the card's name it are now "only" seven new lines in the tiny DVB-T/DVB-S switch function. saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:02:08.0, rev: 209, irq: 18, latency: 32, mmio: 0xfdef7000 saa7133[0]: subsystem: 1043:4878, board: Asus Tiger 3in1 [card=147,autodetected] saa7133[0]: board init: gpio is 200000 tuner' 2-004b: chip found @ 0x96 (saa7133[0]) saa7133[0]: i2c eeprom 00: 43 10 78 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d7 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 28 00 c2 96 16 03 02 c0 1c ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c scan: found device @ 0x10 [???] saa7133[0]: i2c scan: found device @ 0x16 [???] saa7133[0]: i2c scan: found device @ 0x1c [???] saa7133[0]: i2c scan: found device @ 0x96 [???] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] tda829x 2-004b: setting tuner address to 61 tda829x 2-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10086 DVB-S)... The board init gpio is 0x0, 0x200000 is from previously unloading with antenna_switch = 1. It needs firmware for the tda10046 and analog sound needs saa7134-alsa. I have support for one more board and need to fix the first revision of the Asus Tiger DVB-T hybrid. DVB-T currently hangs on the male radio antenna input, also some small other stuff. Please report any issues with this patch, the next are depending on this one. saa7134: add support for the triple Asus Tiger 3in1 Signed-off-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx88 | 3 +- Documentation/video4linux/CARDLIST.saa7134 | 1 + drivers/media/video/saa7134/saa7134-cards.c | 44 +++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-dvb.c | 39 +++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134.h | 1 + 5 files changed, 87 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 8fea2975410..075650c95fe 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -68,6 +68,7 @@ 67 -> Kworld PlusTV HD PCI 120 (ATSC 120) [17de:08c1] 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902] 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906] - 70 -> TeVii S460 DVB-S/S2 [D460:9022] + 70 -> TeVii S460 DVB-S/S2 [d460:9022] 71 -> Omicom SS4 DVB-S/S2 PCI [A044:2011] 72 -> TBS 8920 DVB-S/S2 [8920:8888] + 73 -> TeVii S420 DVB-S [d420:9022] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 39868af9cf9..c121f44aefc 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -145,3 +145,4 @@ 144 -> Beholder BeholdTV M6 Extra [5ace:6193] 145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636] 146 -> ASUSTeK P7131 Analog +147 -> Asus Tiger 3in1 [1043:4878] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 98364d171de..3c2f09fb044 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4409,6 +4409,36 @@ struct saa7134_board saa7134_boards[] = { /* no DVB support for now */ /* .mpeg = SAA7134_MPEG_DVB, */ }, + [SAA7134_BOARD_ASUSTeK_TIGER_3IN1] = { + .name = "Asus Tiger 3in1", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 2, + .gpiomask = 1 << 21, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -5431,6 +5461,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x1461, /* Avermedia Technologies Inc */ .subdevice = 0xf636, .driver_data = SAA7134_BOARD_AVERMEDIA_M103, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x4878, /* REV:1.02G */ + .driver_data = SAA7134_BOARD_ASUSTeK_TIGER_3IN1, }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, @@ -6002,6 +6038,14 @@ int saa7134_board_init2(struct saa7134_dev *dev) i2c_transfer(&dev->i2c_adap, &msg, 1); break; } + case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: + { + u8 data[] = { 0x3c, 0x33, 0x60}; + struct i2c_msg msg = {.addr = 0x0b, .flags = 0, .buf = data, + .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + break; + } case SAA7134_BOARD_FLYDVB_TRIO: { u8 data[] = { 0x3c, 0x33, 0x62}; diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index be48b9b66a6..7fa6ce76642 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -799,6 +799,20 @@ static struct tda1004x_config twinhan_dtv_dvb_3056_config = { .request_firmware = philips_tda1004x_request_firmware }; +static struct tda1004x_config asus_tiger_3in1_config = { + .demod_address = 0x0b, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch = 1, + .request_firmware = philips_tda1004x_request_firmware +}; + /* ------------------------------------------------------------------ * special case: this card uses saa713x GPIO22 for the mode switch */ @@ -1300,6 +1314,31 @@ static int dvb_init(struct saa7134_dev *dev) &dev->i2c_adap); attach_xc3028 = 1; break; + case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: + if (!use_frontend) { /* terrestrial */ + if (configure_tda827x_fe(dev, &asus_tiger_3in1_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; + } else { /* satellite */ + dev->dvb.frontend = dvb_attach(tda10086_attach, + &flydvbs, &dev->i2c_adap); + if (dev->dvb.frontend) { + if (dvb_attach(tda826x_attach, + dev->dvb.frontend, 0x60, + &dev->i2c_adap, 0) == NULL) { + wprintk("%s: Asus Tiger 3in1, no " + "tda826x found!\n", __func__); + goto dettach_frontend; + } + if (dvb_attach(lnbp21_attach, dev->dvb.frontend, + &dev->i2c_adap, 0, 0) == NULL) { + wprintk("%s: Asus Tiger 3in1, no lnbp21" + " found!\n", __func__); + goto dettach_frontend; + } + } + } + break; default: wprintk("Huh? unknown DVB card?\n"); break; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 5e7fc731fab..cbfdac27b69 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -269,6 +269,7 @@ struct saa7134_format { #define SAA7134_BOARD_BEHOLD_M6_EXTRA 144 #define SAA7134_BOARD_AVERMEDIA_M103 145 #define SAA7134_BOARD_ASUSTeK_P7131_ANALOG 146 +#define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 -- cgit v1.2.3-70-g09d2 From bf1ece6a4f30f05b227f2ec59fa0d45b5db186d2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 26 Jun 2008 17:03:00 -0300 Subject: V4L/DVB (9059): saa7134: Add support for Encore version 5.3 board Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 1 + drivers/media/common/ir-keymaps.c | 43 +++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-cards.c | 43 +++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-input.c | 6 ++++ drivers/media/video/saa7134/saa7134.h | 1 + include/media/ir-common.h | 1 + 6 files changed, 95 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index c121f44aefc..14383640393 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -146,3 +146,4 @@ 145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636] 146 -> ASUSTeK P7131 Analog 147 -> Asus Tiger 3in1 [1043:4878] +148 -> Encore ENLTV-FM v5.3 [1a7f:2008] diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index aedfabd5738..891f3b30be0 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -2288,3 +2288,46 @@ IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = { [0x2a] = KEY_MENU, }; EXPORT_SYMBOL_GPL(ir_codes_avermedia_a16d); + +/* Encore ENLTV-FM v5.3 + Mauro Carvalho Chehab + */ +IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE] = { + [0x10] = KEY_POWER2, + [0x06] = KEY_MUTE, + + [0x09] = KEY_1, + [0x1d] = KEY_2, + [0x1f] = KEY_3, + [0x19] = KEY_4, + [0x1b] = KEY_5, + [0x11] = KEY_6, + [0x17] = KEY_7, + [0x12] = KEY_8, + [0x16] = KEY_9, + [0x48] = KEY_0, + + [0x04] = KEY_LIST, /* -/-- */ + [0x40] = KEY_LAST, /* recall */ + + [0x02] = KEY_MODE, /* TV/AV */ + [0x05] = KEY_SHUFFLE, /* SNAPSHOT */ + + [0x4c] = KEY_CHANNELUP, /* UP */ + [0x00] = KEY_CHANNELDOWN, /* DOWN */ + [0x0d] = KEY_VOLUMEUP, /* RIGHT */ + [0x15] = KEY_VOLUMEDOWN, /* LEFT */ + [0x49] = KEY_ENTER, /* OK */ + + [0x54] = KEY_RECORD, + [0x4d] = KEY_PLAY, /* pause */ + + [0x1e] = KEY_UP, /* video setting */ + [0x0e] = KEY_RIGHT, /* <- */ + [0x1a] = KEY_LEFT, /* -> */ + + [0x0a] = KEY_DOWN, /* video default */ + [0x0c] = KEY_ZOOM, /* hide pannel */ + [0x47] = KEY_SLEEP, /* shutdown */ +}; +EXPORT_SYMBOL_GPL(ir_codes_encore_enltv_fm53); diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 4f32486a10d..3ad5b941dfb 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3392,6 +3392,42 @@ struct saa7134_board saa7134_boards[] = { .amux = 0, }, }, + [SAA7134_BOARD_ENCORE_ENLTV_FM53] = { + .name = "Encore ENLTV-FM v5.3", + .audio_clock = 0x00200000, + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x7000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = 1, + .tv = 1, + .gpio = 0x50000, + }, { + .name = name_comp1, + .vmux = 3, + .amux = 2, + .gpio = 0x2000, + }, { + .name = name_svideo, + .vmux = 8, + .amux = 2, + .gpio = 0x2000, + } }, + .radio = { + .name = name_radio, + .vmux = 1, + .amux = 1, + }, + .mute = { + .name = name_mute, + .gpio = 0xf000, + .amux = 0, + }, + }, [SAA7134_BOARD_CINERGY_HT_PCI] = { .name = "Terratec Cinergy HT PCI", .audio_clock = 0x00187de7, @@ -5190,6 +5226,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subdevice = 0x230f, .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM, },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1a7f, + .subdevice = 0x2008, + .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM53, + }, { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x153b, @@ -5684,6 +5726,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_A16AR: case SAA7134_BOARD_ENCORE_ENLTV: case SAA7134_BOARD_ENCORE_ENLTV_FM: + case SAA7134_BOARD_ENCORE_ENLTV_FM53: case SAA7134_BOARD_10MOONSTVMASTER3: case SAA7134_BOARD_BEHOLD_401: case SAA7134_BOARD_BEHOLD_403: diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index ac6beb2df83..f1767309b1e 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -509,6 +509,12 @@ int saa7134_input_init1(struct saa7134_dev *dev) mask_keyup = 0x040000; polling = 50; // ms break; + case SAA7134_BOARD_ENCORE_ENLTV_FM53: + ir_codes = ir_codes_encore_enltv_fm53; + mask_keydown = 0x0040000; + mask_keycode = 0x00007f; + nec_gpio = 1; + break; case SAA7134_BOARD_10MOONSTVMASTER3: ir_codes = ir_codes_encore_enltv; mask_keycode = 0x5f80000; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 4005335c4f5..982003d49dd 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -270,6 +270,7 @@ struct saa7134_format { #define SAA7134_BOARD_AVERMEDIA_M103 145 #define SAA7134_BOARD_ASUSTeK_P7131_ANALOG 146 #define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 +#define SAA7134_BOARD_ENCORE_ENLTV_FM53 148 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 6f8ef35de4a..b029987d18c 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -153,6 +153,7 @@ extern IR_KEYTAB_TYPE ir_codes_pinnacle_pctv_hd[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_genius_tvgo_a11mce[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE]; #endif -- cgit v1.2.3-70-g09d2 From 36f6bb97caa772d7dc42250db74253e0867a444a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 26 Jun 2008 17:03:00 -0300 Subject: V4L/DVB (9060): saa7134: Add support for Avermedia PCI pure analog (M135A) Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 1 + drivers/media/common/ir-keymaps.c | 50 +++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-cards.c | 41 +++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-input.c | 6 ++++ drivers/media/video/saa7134/saa7134.h | 1 + include/media/ir-common.h | 1 + 6 files changed, 100 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 14383640393..2023c4020ac 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -147,3 +147,4 @@ 146 -> ASUSTeK P7131 Analog 147 -> Asus Tiger 3in1 [1043:4878] 148 -> Encore ENLTV-FM v5.3 [1a7f:2008] +149 -> Avermedia PCI pure analog (M135A) [1461:f11d] diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index 891f3b30be0..f061dfbc927 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -103,6 +103,56 @@ IR_KEYTAB_TYPE ir_codes_avermedia_dvbt[IR_KEYTAB_SIZE] = { EXPORT_SYMBOL_GPL(ir_codes_avermedia_dvbt); +/* Mauro Carvalho Chehab */ +IR_KEYTAB_TYPE ir_codes_avermedia_m135a[IR_KEYTAB_SIZE] = { + [0x00] = KEY_POWER2, + [0x2e] = KEY_DOT, /* '.' */ + [0x01] = KEY_MODE, /* TV/FM */ + + [0x05] = KEY_1, + [0x06] = KEY_2, + [0x07] = KEY_3, + [0x09] = KEY_4, + [0x0a] = KEY_5, + [0x0b] = KEY_6, + [0x0d] = KEY_7, + [0x0e] = KEY_8, + [0x0f] = KEY_9, + [0x11] = KEY_0, + + [0x13] = KEY_RIGHT, /* -> */ + [0x12] = KEY_LEFT, /* <- */ + + [0x17] = KEY_SLEEP, /* Capturar Imagem */ + [0x10] = KEY_SHUFFLE, /* Amostra */ + + /* FIXME: The keys bellow aren't ok */ + + [0x43] = KEY_CHANNELUP, + [0x42] = KEY_CHANNELDOWN, + [0x1f] = KEY_VOLUMEUP, + [0x1e] = KEY_VOLUMEDOWN, + [0x0c] = KEY_ENTER, + + [0x14] = KEY_MUTE, + [0x08] = KEY_AUDIO, + + [0x03] = KEY_TEXT, + [0x04] = KEY_EPG, + [0x2b] = KEY_TV2, /* TV2 */ + + [0x1d] = KEY_RED, + [0x1c] = KEY_YELLOW, + [0x41] = KEY_GREEN, + [0x40] = KEY_BLUE, + + [0x1a] = KEY_PLAYPAUSE, + [0x19] = KEY_RECORD, + [0x18] = KEY_PLAY, + [0x1b] = KEY_STOP, +}; +EXPORT_SYMBOL_GPL(ir_codes_avermedia_m135a); + /* Attila Kondoros */ IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = { diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 3ad5b941dfb..a16ddb21288 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3671,6 +3671,40 @@ struct saa7134_board saa7134_boards[] = { .tv = 1, }}, }, + [SAA7134_BOARD_AVERMEDIA_M135A] = { + .name = "Avermedia PCI pure analog (M135A)", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 2, + .gpiomask = 0x020200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x00200000, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x01, + }, + }, [SAA7134_BOARD_BEHOLD_401] = { /* Beholder Intl. Ltd. 2008 */ /*Dmitry Belimov */ @@ -4846,6 +4880,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .driver_data = SAA7134_BOARD_AVERMEDIA_GO_007_FM, },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf11d, + .driver_data = SAA7134_BOARD_AVERMEDIA_M135A, + }, { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7130, .subvendor = PCI_VENDOR_ID_PHILIPS, @@ -5702,6 +5742,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_STUDIO_507: case SAA7134_BOARD_AVERMEDIA_GO_007_FM: case SAA7134_BOARD_AVERMEDIA_777: + case SAA7134_BOARD_AVERMEDIA_M135A: /* case SAA7134_BOARD_SABRENT_SBTTVFM: */ /* not finished yet */ case SAA7134_BOARD_VIDEOMATE_TV_PVR: case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS: diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index f1767309b1e..0fded7511ea 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -401,6 +401,12 @@ int saa7134_input_init1(struct saa7134_dev *dev) saa_setb(SAA7134_GPIO_GPMODE0, 0x4); saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4); break; + case SAA7134_BOARD_AVERMEDIA_M135A: + ir_codes = ir_codes_avermedia_m135a; + mask_keydown = 0x0040000; + mask_keycode = 0x00013f; + nec_gpio = 1; + break; case SAA7134_BOARD_AVERMEDIA_777: case SAA7134_BOARD_AVERMEDIA_A16AR: ir_codes = ir_codes_avermedia; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 982003d49dd..caf055ce310 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -271,6 +271,7 @@ struct saa7134_format { #define SAA7134_BOARD_ASUSTeK_P7131_ANALOG 146 #define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 #define SAA7134_BOARD_ENCORE_ENLTV_FM53 148 +#define SAA7134_BOARD_AVERMEDIA_M135A 149 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 diff --git a/include/media/ir-common.h b/include/media/ir-common.h index b029987d18c..54a57d0c73e 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -110,6 +110,7 @@ void ir_rc5_timer_keyup(unsigned long data); extern IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_avermedia[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_avermedia_dvbt[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_avermedia_m135a[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_pixelview[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_pixelview_new[IR_KEYTAB_SIZE]; -- cgit v1.2.3-70-g09d2 From 9b0001913983de65af17eee8baf02283160f5a69 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 26 Jun 2008 17:03:00 -0300 Subject: V4L/DVB (9061): saa7134: Add support for Real Audio 220 Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 1 + drivers/media/common/ir-keymaps.c | 40 +++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-cards.c | 36 ++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-input.c | 6 +++++ drivers/media/video/saa7134/saa7134.h | 1 + include/media/ir-common.h | 2 +- 6 files changed, 85 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 2023c4020ac..aa06151a2ef 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -146,5 +146,6 @@ 145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636] 146 -> ASUSTeK P7131 Analog 147 -> Asus Tiger 3in1 [1043:4878] +147 -> Zogis Real Angel 220 148 -> Encore ENLTV-FM v5.3 [1a7f:2008] 149 -> Avermedia PCI pure analog (M135A) [1461:f11d] diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index f061dfbc927..b7ed88c59b5 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -2381,3 +2381,43 @@ IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE] = { [0x47] = KEY_SLEEP, /* shutdown */ }; EXPORT_SYMBOL_GPL(ir_codes_encore_enltv_fm53); + +/* Zogis Real Audio 220 - 32 keys IR */ +IR_KEYTAB_TYPE ir_codes_real_audio_220_32_keys[IR_KEYTAB_SIZE] = { + [0x1c] = KEY_RADIO, + [0x12] = KEY_POWER2, + + [0x01] = KEY_1, + [0x02] = KEY_2, + [0x03] = KEY_3, + [0x04] = KEY_4, + [0x05] = KEY_5, + [0x06] = KEY_6, + [0x07] = KEY_7, + [0x08] = KEY_8, + [0x09] = KEY_9, + [0x00] = KEY_0, + + [0x0c] = KEY_VOLUMEUP, + [0x18] = KEY_VOLUMEDOWN, + [0x0b] = KEY_CHANNELUP, + [0x15] = KEY_CHANNELDOWN, + [0x16] = KEY_ENTER, + + [0x11] = KEY_LIST, /* Source */ + [0x0d] = KEY_AUDIO, /* stereo */ + + [0x0f] = KEY_PREVIOUS, /* Prev */ + [0x1b] = KEY_PAUSE, /* Timeshift */ + [0x1a] = KEY_NEXT, /* Next */ + + [0x0e] = KEY_STOP, + [0x1f] = KEY_PLAY, + [0x1e] = KEY_PLAYPAUSE, /* Pause */ + + [0x1d] = KEY_RECORD, + [0x13] = KEY_MUTE, + [0x19] = KEY_SHUFFLE, /* Snapshot */ + +}; +EXPORT_SYMBOL_GPL(ir_codes_real_audio_220_32_keys); diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index a16ddb21288..2a5e0dbc4d4 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4513,6 +4513,41 @@ struct saa7134_board saa7134_boards[] = { .gpio = 0x0200000, }, }, + [SAA7134_BOARD_REAL_ANGEL_220] = { + .name = "Zogis Real Angel 220", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x801a8087, + .inputs = { { + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + .gpio = 0x624000, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + .gpio = 0x624000, + }, { + .name = name_svideo, + .vmux = 1, + .amux = LINE1, + .gpio = 0x624000, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x624001, + }, + .mute = { + .name = name_mute, + .amux = TV, + }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -5780,6 +5815,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_BEHOLD_505FM: case SAA7134_BOARD_BEHOLD_507_9FM: case SAA7134_BOARD_GENIUS_TVGO_A11MCE: + case SAA7134_BOARD_REAL_ANGEL_220: dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_FLYDVBS_LR300: diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 0fded7511ea..72a1c67a8c3 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -533,6 +533,12 @@ int saa7134_input_init1(struct saa7134_dev *dev) mask_keydown = 0xf00000; polling = 50; /* ms */ break; + case SAA7134_BOARD_REAL_ANGEL_220: + ir_codes = ir_codes_real_audio_220_32_keys; + mask_keycode = 0x3f00; + mask_keyup = 0x4000; + polling = 50; /* ms */ + break; } if (NULL == ir_codes) { printk("%s: Oops: IR config error [card=%d]\n", diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index caf055ce310..c17919a1695 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -272,6 +272,7 @@ struct saa7134_format { #define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 #define SAA7134_BOARD_ENCORE_ENLTV_FM53 148 #define SAA7134_BOARD_AVERMEDIA_M135A 149 +#define SAA7134_BOARD_REAL_ANGEL_220 147 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 54a57d0c73e..436360ed0b1 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -155,7 +155,7 @@ extern IR_KEYTAB_TYPE ir_codes_genius_tvgo_a11mce[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE]; - +extern IR_KEYTAB_TYPE ir_codes_real_audio_220_32_keys[IR_KEYTAB_SIZE]; #endif /* -- cgit v1.2.3-70-g09d2 From a31d2bb773f23f55cc6713f2d1a9b60977bb8f89 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 29 Sep 2008 12:08:29 -0300 Subject: V4L/DVB (9062): Add support for Prolink Pixelview Global Extreme Thanks to Sidney Matias for getting GPIO values and testing on this device. Cc: Sidney Matias Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx88 | 1 + drivers/media/video/cx88/cx88-cards.c | 39 ++++++++++++++++++++++++++++++++- drivers/media/video/cx88/cx88-input.c | 1 + drivers/media/video/cx88/cx88.h | 1 + 4 files changed, 41 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 075650c95fe..50d0b1c559a 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -72,3 +72,4 @@ 71 -> Omicom SS4 DVB-S/S2 PCI [A044:2011] 72 -> TBS 8920 DVB-S/S2 [8920:8888] 73 -> TeVii S420 DVB-S [d420:9022] + 74 -> Prolink Pixelview Global Extreme [1554:4976] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index b5a25094c9e..9f721080152 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1628,6 +1628,36 @@ static const struct cx88_board cx88_boards[] = { .gpio2 = 0x0cfb, }, }, + [CX88_BOARD_PROLINK_PV_GLOBAL_XTREME] = { + .name = "Prolink Pixelview Global Extreme", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cf7, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cfb, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cfb, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x04ff, + .gpio1 = 0x04080, + .gpio2 = 0x0cf7, + }, + }, /* Both radio, analog and ATSC work with this board. However, for analog to work, s5h1409 gate should be open, otherwise, tuner-xc3028 won't be detected. @@ -2125,6 +2155,10 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x1554, .subdevice = 0x4935, .card = CX88_BOARD_PROLINK_PV_8000GT, + }, { + .subvendor = 0x1554, + .subdevice = 0x4976, + .card = CX88_BOARD_PROLINK_PV_GLOBAL_XTREME, }, { .subvendor = 0x17de, .subdevice = 0x08c1, @@ -2429,6 +2463,7 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, return cx88_xc3028_geniatech_tuner_callback(core, command, arg); case CX88_BOARD_PROLINK_PV_8000GT: + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: return cx88_pv_8000gt_callback(core, command, arg); case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: @@ -2582,6 +2617,7 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) udelay(1000); break; + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: case CX88_BOARD_PROLINK_PV_8000GT: cx_write(MO_GP2_IO, 0xcf7); mdelay(50); @@ -2629,9 +2665,10 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: ctl->demod = XC3028_FE_OREN538; break; + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: case CX88_BOARD_PROLINK_PV_8000GT: /* - * This board uses non-MTS firmware + * Those boards uses non-MTS firmware */ break; default: diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 13bc5d16076..8683d104de7 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -261,6 +261,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->polling = 1; /* ms */ break; case CX88_BOARD_PROLINK_PV_8000GT: + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: ir_codes = ir_codes_pixelview_new; ir->gpio_addr = MO_GP1_IO; ir->mask_keycode = 0x3f; diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 30b750ee856..6420fb7615b 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -227,6 +227,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_OMICOM_SS4_PCI 71 #define CX88_BOARD_TBS_8920 72 #define CX88_BOARD_TEVII_S420 73 +#define CX88_BOARD_PROLINK_PV_GLOBAL_XTREME 74 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v1.2.3-70-g09d2 From f689d9083a3a46ae3801c37d0dbcb170fc6a9608 Mon Sep 17 00:00:00 2001 From: Adam Glover Date: Tue, 6 May 2008 03:20:27 -0300 Subject: V4L/DVB (9063): Add ADS Tech Instant HDTV PCI support Add PCI ID and device specific tables for ADS Tech Instant HDTV. [mchehab@redhat.com: make checkpatch happy and fix merge conflicts] Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 3 ++- drivers/media/video/saa7134/saa7134-cards.c | 31 +++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-dvb.c | 1 + drivers/media/video/saa7134/saa7134.h | 3 ++- 4 files changed, 36 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index aa06151a2ef..727b5f21477 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -146,6 +146,7 @@ 145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636] 146 -> ASUSTeK P7131 Analog 147 -> Asus Tiger 3in1 [1043:4878] -147 -> Zogis Real Angel 220 148 -> Encore ENLTV-FM v5.3 [1a7f:2008] 149 -> Avermedia PCI pure analog (M135A) [1461:f11d] +150 -> Zogis Real Angel 220 +151 -> ADS Tech Instant HDTV [1421:0380] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 2a5e0dbc4d4..a2653b82e06 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4548,6 +4548,30 @@ struct saa7134_board saa7134_boards[] = { .amux = TV, }, }, + [SAA7134_BOARD_ADS_INSTANT_HDTV_PCI] = { + .name = "ADS Tech Instant HDTV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TUV1236D, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .mpeg = SAA7134_MPEG_DVB, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 4, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -5564,6 +5588,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x185b, .subdevice = 0xc900, .driver_data = SAA7134_BOARD_VIDEOMATE_T750, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */ + .subvendor = 0x1421, + .subdevice = 0x0380, + .driver_data = SAA7134_BOARD_ADS_INSTANT_HDTV_PCI, }, { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, @@ -6195,6 +6225,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) i2c_transfer(&dev->i2c_adap, &msg, 1); break; } + case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: case SAA7134_BOARD_KWORLD_ATSC110: { /* enable tuner */ diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 0dd6b988820..2c5185778af 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1156,6 +1156,7 @@ static int dvb_init(struct saa7134_dev *dev) dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, NULL, DVB_PLL_TDHU2); break; + case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: case SAA7134_BOARD_KWORLD_ATSC110: dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, &dev->i2c_adap); diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index c17919a1695..0907c70dc48 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -272,7 +272,8 @@ struct saa7134_format { #define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 #define SAA7134_BOARD_ENCORE_ENLTV_FM53 148 #define SAA7134_BOARD_AVERMEDIA_M135A 149 -#define SAA7134_BOARD_REAL_ANGEL_220 147 +#define SAA7134_BOARD_REAL_ANGEL_220 150 +#define SAA7134_BOARD_ADS_INSTANT_HDTV_PCI 151 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 -- cgit v1.2.3-70-g09d2 From 9f4c0617edcc676a5281c04bf48a305b80dd5397 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 22 Sep 2008 02:57:56 -0300 Subject: V4L/DVB (9081): gspca: Bad webcam name of 046d:092f in documentation. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 308ce4ee23d..a845667ac43 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -82,7 +82,7 @@ spca561 046d:092b Labtec Webcam Plus spca561 046d:092c Logitech QC chat Elch2 spca561 046d:092d Logitech QC Elch2 spca561 046d:092e Logitech QC Elch2 -spca561 046d:092f Logitech QC Elch2 +spca561 046d:092f Logitech QuickCam Express Plus sunplus 046d:0960 Logitech ClickSmart 420 sunplus 0471:0322 Philips DMVC1300K zc3xx 0471:0325 Philips SPC 200 NC -- cgit v1.2.3-70-g09d2 From 97076859590ada76dc4bee46b6ccad86d89e82cf Mon Sep 17 00:00:00 2001 From: Frank Zago Date: Mon, 29 Sep 2008 06:59:36 -0300 Subject: V4L/DVB (9088): gspca: New subdriver 'finepix' added. Signed-off-by: Frank Zago Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 23 ++ drivers/media/video/gspca/Makefile | 3 +- drivers/media/video/gspca/finepix.c | 465 ++++++++++++++++++++++++++++++++++++ 3 files changed, 490 insertions(+), 1 deletion(-) create mode 100644 drivers/media/video/gspca/finepix.c (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index a845667ac43..04c612eb897 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -97,6 +97,29 @@ sunplus 04a5:3003 Benq DC 1300 sunplus 04a5:3008 Benq DC 1500 sunplus 04a5:300a Benq DC 3410 spca500 04a5:300c Benq DC 1016 +finepix 04cb:0104 Fujifilm FinePix 4800 +finepix 04cb:0109 Fujifilm FinePix A202 +finepix 04cb:010b Fujifilm FinePix A203 +finepix 04cb:010f Fujifilm FinePix A204 +finepix 04cb:0111 Fujifilm FinePix A205 +finepix 04cb:0113 Fujifilm FinePix A210 +finepix 04cb:0115 Fujifilm FinePix A303 +finepix 04cb:0117 Fujifilm FinePix A310 +finepix 04cb:0119 Fujifilm FinePix F401 +finepix 04cb:011b Fujifilm FinePix F402 +finepix 04cb:011d Fujifilm FinePix F410 +finepix 04cb:0121 Fujifilm FinePix F601 +finepix 04cb:0123 Fujifilm FinePix F700 +finepix 04cb:0125 Fujifilm FinePix M603 +finepix 04cb:0127 Fujifilm FinePix S300 +finepix 04cb:0129 Fujifilm FinePix S304 +finepix 04cb:012b Fujifilm FinePix S500 +finepix 04cb:012d Fujifilm FinePix S602 +finepix 04cb:012f Fujifilm FinePix S700 +finepix 04cb:0131 Fujifilm FinePix unknown model +finepix 04cb:013b Fujifilm FinePix unknown model +finepix 04cb:013d Fujifilm FinePix unknown model +finepix 04cb:013f Fujifilm FinePix F420 sunplus 04f1:1001 JVC GC A50 spca561 04fc:0561 Flexcam 100 sunplus 04fc:500c Sunplus CA500C diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index e68a8965297..78bad045913 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -1,5 +1,5 @@ obj-$(CONFIG_USB_GSPCA) += gspca_main.o \ - gspca_conex.o gspca_etoms.o gspca_mars.o \ + gspca_conex.o gspca_etoms.o gspca_finepix.o gspca_mars.o \ gspca_ov519.o gspca_pac207.o gspca_pac7311.o \ gspca_sonixb.o gspca_sonixj.o gspca_spca500.o gspca_spca501.o \ gspca_spca505.o gspca_spca506.o gspca_spca508.o gspca_spca561.o \ @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_GSPCA) += gspca_main.o \ gspca_main-objs := gspca.o gspca_conex-objs := conex.o gspca_etoms-objs := etoms.o +gspca_finepix-objs := finepix.o gspca_mars-objs := mars.o gspca_ov519-objs := ov519.o gspca_pac207-objs := pac207.o diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c new file mode 100644 index 00000000000..f75db9585f0 --- /dev/null +++ b/drivers/media/video/gspca/finepix.c @@ -0,0 +1,465 @@ +/* + * Fujifilm Finepix subdriver + * + * Copyright (C) 2008 Frank Zago + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MODULE_NAME "finepix" + +#include "gspca.h" + +MODULE_AUTHOR("Frank Zago "); +MODULE_DESCRIPTION("Fujifilm FinePix USB V4L2 driver"); +MODULE_LICENSE("GPL"); + +/* Default timeout, in ms */ +#define FPIX_TIMEOUT (HZ / 10) + +/* Maximum transfer size to use. The windows driver reads by chunks of + * 0x2000 bytes, so do the same. Note: reading more seems to work + * too. */ +#define FPIX_MAX_TRANSFER 0x2000 + +/* Structure to hold all of our device specific stuff */ +struct usb_fpix { + struct gspca_dev gspca_dev; /* !! must be the first item */ + + /* + * USB stuff + */ + struct usb_ctrlrequest ctrlreq; + struct urb *control_urb; + struct timer_list bulk_timer; + + enum { + FPIX_NOP, /* inactive, else streaming */ + FPIX_RESET, /* must reset */ + FPIX_REQ_FRAME, /* requesting a frame */ + FPIX_READ_FRAME, /* reading frame */ + } state; + + /* + * Driver stuff + */ + struct delayed_work wqe; + struct completion can_close; + int streaming; +}; + +/* Delay after which claim the next frame. If the delay is too small, + * the camera will return old frames. On the 4800Z, 20ms is bad, 25ms + * will fail every 4 or 5 frames, but 30ms is perfect. */ +#define NEXT_FRAME_DELAY (((HZ * 30) + 999) / 1000) + +#define dev_new_state(new_state) { \ + PDEBUG(D_STREAM, "new state from %d to %d at %s:%d", \ + dev->state, new_state, __func__, __LINE__); \ + dev->state = new_state; \ +} + +/* These cameras only support 320x200. */ +static struct v4l2_pix_format fpix_mode[1] = { + { 320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0} +}; + +/* Reads part of a frame */ +static void read_frame_part(struct usb_fpix *dev) +{ + int ret; + + PDEBUG(D_STREAM, "read_frame_part"); + + /* Reads part of a frame */ + ret = usb_submit_urb(dev->gspca_dev.urb[0], GFP_ATOMIC); + if (ret) { + dev_new_state(FPIX_RESET); + schedule_delayed_work(&dev->wqe, 1); + PDEBUG(D_STREAM, "usb_submit_urb failed with %d", + ret); + } else { + /* Sometimes we never get a callback, so use a timer. + * Is this masking a bug somewhere else? */ + dev->bulk_timer.expires = jiffies + msecs_to_jiffies(150); + add_timer(&dev->bulk_timer); + } +} + +/* Callback for URBs. */ +static void urb_callback(struct urb *urb) +{ + struct gspca_dev *gspca_dev = urb->context; + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + + PDEBUG(D_PACK, + "enter urb_callback - status=%d, length=%d", + urb->status, urb->actual_length); + + if (dev->state == FPIX_READ_FRAME) + del_timer(&dev->bulk_timer); + + if (urb->status != 0) { + /* We kill a stuck urb every 50 frames on average, so don't + * display a log message for that. */ + if (urb->status != -ECONNRESET) + PDEBUG(D_STREAM, "bad URB status %d", urb->status); + dev_new_state(FPIX_RESET); + schedule_delayed_work(&dev->wqe, 1); + } + + switch (dev->state) { + case FPIX_REQ_FRAME: + dev_new_state(FPIX_READ_FRAME); + read_frame_part(dev); + break; + + case FPIX_READ_FRAME: { + unsigned char *data = urb->transfer_buffer; + struct gspca_frame *frame; + + frame = gspca_get_i_frame(&dev->gspca_dev); + if (frame == NULL) { + gspca_dev->last_packet_type = DISCARD_PACKET; + break; + } + if (urb->actual_length < FPIX_MAX_TRANSFER || + (data[urb->actual_length-2] == 0xff && + data[urb->actual_length-1] == 0xd9)) { + + /* If the result is less than what was asked + * for, then it's the end of the + * frame. Sometime the jpeg is not complete, + * but there's nothing we can do. We also end + * here if the the jpeg ends right at the end + * of the frame. */ + gspca_frame_add(gspca_dev, LAST_PACKET, + frame, + data, urb->actual_length); + dev_new_state(FPIX_REQ_FRAME); + schedule_delayed_work(&dev->wqe, NEXT_FRAME_DELAY); + } else { + + /* got a partial image */ + gspca_frame_add(gspca_dev, + gspca_dev->last_packet_type == LAST_PACKET + ? FIRST_PACKET : INTER_PACKET, + frame, + data, urb->actual_length); + read_frame_part(dev); + } + break; + } + + case FPIX_NOP: + case FPIX_RESET: + PDEBUG(D_STREAM, "invalid state %d", dev->state); + break; + } +} + +/* Request a new frame */ +static void request_frame(struct usb_fpix *dev) +{ + int ret; + struct gspca_dev *gspca_dev = &dev->gspca_dev; + + /* Setup command packet */ + memset(gspca_dev->usb_buf, 0, 12); + gspca_dev->usb_buf[0] = 0xd3; + gspca_dev->usb_buf[7] = 0x01; + + /* Request a frame */ + dev->ctrlreq.bRequestType = + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE; + dev->ctrlreq.bRequest = USB_REQ_GET_STATUS; + dev->ctrlreq.wValue = 0; + dev->ctrlreq.wIndex = 0; + dev->ctrlreq.wLength = cpu_to_le16(12); + + usb_fill_control_urb(dev->control_urb, + gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + (unsigned char *) &dev->ctrlreq, + gspca_dev->usb_buf, + 12, urb_callback, gspca_dev); + + ret = usb_submit_urb(dev->control_urb, GFP_ATOMIC); + if (ret) { + dev_new_state(FPIX_RESET); + schedule_delayed_work(&dev->wqe, 1); + PDEBUG(D_STREAM, "usb_submit_urb failed with %d", ret); + } +} + +/*--------------------------------------------------------------------------*/ + +/* State machine. */ +static void fpix_sm(struct work_struct *work) +{ + struct usb_fpix *dev = container_of(work, struct usb_fpix, wqe.work); + + PDEBUG(D_STREAM, "fpix_sm state %d", dev->state); + + /* verify that the device wasn't unplugged */ + if (!dev->gspca_dev.present) { + PDEBUG(D_STREAM, "device is gone"); + dev_new_state(FPIX_NOP); + complete(&dev->can_close); + return; + } + + if (!dev->streaming) { + PDEBUG(D_STREAM, "stopping state machine"); + dev_new_state(FPIX_NOP); + complete(&dev->can_close); + return; + } + + switch (dev->state) { + case FPIX_RESET: + dev_new_state(FPIX_REQ_FRAME); + schedule_delayed_work(&dev->wqe, HZ / 10); + break; + + case FPIX_REQ_FRAME: + /* get an image */ + request_frame(dev); + break; + + case FPIX_NOP: + case FPIX_READ_FRAME: + PDEBUG(D_STREAM, "invalid state %d", dev->state); + break; + } +} + +/* this function is called at probe time */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct cam *cam = &gspca_dev->cam; + + cam->cam_mode = fpix_mode; + cam->nmodes = 1; + cam->epaddr = 0x01; /* todo: correct for all cams? */ + cam->bulk_size = FPIX_MAX_TRANSFER; + +/* gspca_dev->nbalt = 1; * use bulk transfer */ + return 0; +} + +/* Stop streaming and free the ressources allocated by sd_start. */ +static void sd_stopN(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + + dev->streaming = 0; + + /* Stop the state machine */ + if (dev->state != FPIX_NOP) + wait_for_completion(&dev->can_close); + + usb_free_urb(dev->control_urb); + dev->control_urb = NULL; +} + +/* Kill an URB that hasn't completed. */ +static void timeout_kill(unsigned long data) +{ + struct urb *urb = (struct urb *) data; + + usb_unlink_urb(urb); +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + + INIT_DELAYED_WORK(&dev->wqe, fpix_sm); + + init_timer(&dev->bulk_timer); + dev->bulk_timer.function = timeout_kill; + + return 0; +} + +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + int ret; + int size_ret; + + /* Reset bulk in endpoint */ + usb_clear_halt(gspca_dev->dev, gspca_dev->cam.epaddr); + + /* Init the device */ + memset(gspca_dev->usb_buf, 0, 12); + gspca_dev->usb_buf[0] = 0xc6; + gspca_dev->usb_buf[8] = 0x20; + + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + USB_REQ_GET_STATUS, + USB_DIR_OUT | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, 0, 0, gspca_dev->usb_buf, + 12, FPIX_TIMEOUT); + + if (ret != 12) { + PDEBUG(D_STREAM, "usb_control_msg failed (%d)", ret); + ret = -EIO; + goto error; + } + + /* Read the result of the command. Ignore the result, for it + * varies with the device. */ + ret = usb_bulk_msg(gspca_dev->dev, + usb_rcvbulkpipe(gspca_dev->dev, + gspca_dev->cam.epaddr), + gspca_dev->usb_buf, FPIX_MAX_TRANSFER, &size_ret, + FPIX_TIMEOUT); + if (ret != 0) { + PDEBUG(D_STREAM, "usb_bulk_msg failed (%d)", ret); + ret = -EIO; + goto error; + } + + /* Request a frame, but don't read it */ + memset(gspca_dev->usb_buf, 0, 12); + gspca_dev->usb_buf[0] = 0xd3; + gspca_dev->usb_buf[7] = 0x01; + + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + USB_REQ_GET_STATUS, + USB_DIR_OUT | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, 0, 0, gspca_dev->usb_buf, + 12, FPIX_TIMEOUT); + if (ret != 12) { + PDEBUG(D_STREAM, "usb_control_msg failed (%d)", ret); + ret = -EIO; + goto error; + } + + /* Again, reset bulk in endpoint */ + usb_clear_halt(gspca_dev->dev, gspca_dev->cam.epaddr); + + /* Allocate a control URB */ + dev->control_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->control_urb) { + PDEBUG(D_STREAM, "No free urbs available"); + ret = -EIO; + goto error; + } + + /* Various initializations. */ + init_completion(&dev->can_close); + dev->bulk_timer.data = (unsigned long)dev->gspca_dev.urb[0]; + dev->gspca_dev.urb[0]->complete = urb_callback; + dev->streaming = 1; + + /* Schedule a frame request. */ + dev_new_state(FPIX_REQ_FRAME); + schedule_delayed_work(&dev->wqe, 1); + + return 0; + +error: + /* Free the ressources */ + sd_stopN(gspca_dev); + return ret; +} + +/* Table of supported USB devices */ +static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x04cb, 0x0104)}, + {USB_DEVICE(0x04cb, 0x0109)}, + {USB_DEVICE(0x04cb, 0x010b)}, + {USB_DEVICE(0x04cb, 0x010f)}, + {USB_DEVICE(0x04cb, 0x0111)}, + {USB_DEVICE(0x04cb, 0x0113)}, + {USB_DEVICE(0x04cb, 0x0115)}, + {USB_DEVICE(0x04cb, 0x0117)}, + {USB_DEVICE(0x04cb, 0x0119)}, + {USB_DEVICE(0x04cb, 0x011b)}, + {USB_DEVICE(0x04cb, 0x011d)}, + {USB_DEVICE(0x04cb, 0x0121)}, + {USB_DEVICE(0x04cb, 0x0123)}, + {USB_DEVICE(0x04cb, 0x0125)}, + {USB_DEVICE(0x04cb, 0x0127)}, + {USB_DEVICE(0x04cb, 0x0129)}, + {USB_DEVICE(0x04cb, 0x012b)}, + {USB_DEVICE(0x04cb, 0x012d)}, + {USB_DEVICE(0x04cb, 0x012f)}, + {USB_DEVICE(0x04cb, 0x0131)}, + {USB_DEVICE(0x04cb, 0x013b)}, + {USB_DEVICE(0x04cb, 0x013d)}, + {USB_DEVICE(0x04cb, 0x013f)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = sd_config, + .init = sd_init, + .start = sd_start, + .stopN = sd_stopN, +}; + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, + &sd_desc, + sizeof(struct usb_fpix), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + if (usb_register(&sd_driver) < 0) + return -1; + PDEBUG(D_PROBE, "registered"); + return 0; +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); + PDEBUG(D_PROBE, "deregistered"); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); -- cgit v1.2.3-70-g09d2 From c109f8168f259ea1f1ab7009c6b99dbe8ea0e2b2 Mon Sep 17 00:00:00 2001 From: Erik Andren Date: Wed, 1 Oct 2008 04:51:53 -0300 Subject: V4L/DVB (9091): gspca: Subdriver m5602 (ALi) added. This patch adds support for the ALi m5602 usb bridge and is based on the gspca framework. It contains code for communicating with 5 different sensors: OmniVision OV9650, Pixel Plus PO1030, Samsung S5K83A, S5K4AA and finally Micron MT9M111. Signed-off-by: Erik Andren Signed-off-by: Jean-Francois Moine [mchehab@redhat.com: fix m5602/Makefile] [mchehab@redhat.com: extern debug caused conflicts. Renamed to m5602_debug] Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + Documentation/video4linux/m5602.txt | 12 + drivers/media/video/gspca/Kconfig | 3 + drivers/media/video/gspca/Makefile | 3 + drivers/media/video/gspca/m5602/Kconfig | 11 + drivers/media/video/gspca/m5602/Makefile | 11 + drivers/media/video/gspca/m5602/m5602_bridge.h | 180 ++++ drivers/media/video/gspca/m5602/m5602_core.c | 321 +++++++ drivers/media/video/gspca/m5602/m5602_mt9m111.c | 343 ++++++++ drivers/media/video/gspca/m5602/m5602_mt9m111.h | 1020 +++++++++++++++++++++++ drivers/media/video/gspca/m5602/m5602_ov9650.c | 544 ++++++++++++ drivers/media/video/gspca/m5602/m5602_ov9650.h | 501 +++++++++++ drivers/media/video/gspca/m5602/m5602_po1030.c | 334 ++++++++ drivers/media/video/gspca/m5602/m5602_po1030.h | 478 +++++++++++ drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 460 ++++++++++ drivers/media/video/gspca/m5602/m5602_s5k4aa.h | 368 ++++++++ drivers/media/video/gspca/m5602/m5602_s5k83a.c | 331 ++++++++ drivers/media/video/gspca/m5602/m5602_s5k83a.h | 444 ++++++++++ drivers/media/video/gspca/m5602/m5602_sensor.h | 76 ++ 19 files changed, 5441 insertions(+) create mode 100644 Documentation/video4linux/m5602.txt create mode 100644 drivers/media/video/gspca/m5602/Kconfig create mode 100644 drivers/media/video/gspca/m5602/Makefile create mode 100644 drivers/media/video/gspca/m5602/m5602_bridge.h create mode 100644 drivers/media/video/gspca/m5602/m5602_core.c create mode 100644 drivers/media/video/gspca/m5602/m5602_mt9m111.c create mode 100644 drivers/media/video/gspca/m5602/m5602_mt9m111.h create mode 100644 drivers/media/video/gspca/m5602/m5602_ov9650.c create mode 100644 drivers/media/video/gspca/m5602/m5602_ov9650.h create mode 100644 drivers/media/video/gspca/m5602/m5602_po1030.c create mode 100644 drivers/media/video/gspca/m5602/m5602_po1030.h create mode 100644 drivers/media/video/gspca/m5602/m5602_s5k4aa.c create mode 100644 drivers/media/video/gspca/m5602/m5602_s5k4aa.h create mode 100644 drivers/media/video/gspca/m5602/m5602_s5k83a.c create mode 100644 drivers/media/video/gspca/m5602/m5602_s5k83a.h create mode 100644 drivers/media/video/gspca/m5602/m5602_sensor.h (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 04c612eb897..004818fab04 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -7,6 +7,7 @@ The modules are: xxxx vend:prod ---- spca501 0000:0000 MystFromOri Unknow Camera +m5602 0402:5602 ALi Video Camera Controller spca501 040a:0002 Kodak DVC-325 spca500 040a:0300 Kodak EZ200 zc3xx 041e:041e Creative WebCam Live! diff --git a/Documentation/video4linux/m5602.txt b/Documentation/video4linux/m5602.txt new file mode 100644 index 00000000000..4450ab13f37 --- /dev/null +++ b/Documentation/video4linux/m5602.txt @@ -0,0 +1,12 @@ +This document describes the ALi m5602 bridge connected +to the following supported sensors: +OmniVision OV9650, +Samsung s5k83a, +Samsung s5k4aa, +Micron mt9m111, +Pixel plus PO1030 + +This driver mimics the windows drivers, which have a braindead implementation sending bayer-encoded frames at VGA resolution. +In a perfect world we should be able to reprogram the m5602 and the connected sensor in hardware instead, supporting a range of resolutions and pixelformats + +Anyway, have fun and please report any bugs to m560x-driver-devel@lists.sourceforge.net diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 42b90742b40..fd31099e36a 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -11,3 +11,6 @@ config USB_GSPCA To compile this driver as modules, choose M here: the modules will be called gspca_xxxx. + +source "drivers/media/video/gspca/m5602/Kconfig" + diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index 78bad045913..488ed97c58a 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -28,3 +28,6 @@ gspca_t613-objs := t613.o gspca_tv8532-objs := tv8532.o gspca_vc032x-objs := vc032x.o gspca_zc3xx-objs := zc3xx.o + +obj-$(CONFIG_USB_M5602) += m5602/ + diff --git a/drivers/media/video/gspca/m5602/Kconfig b/drivers/media/video/gspca/m5602/Kconfig new file mode 100644 index 00000000000..7de33e22117 --- /dev/null +++ b/drivers/media/video/gspca/m5602/Kconfig @@ -0,0 +1,11 @@ +config USB_M5602 + tristate "USB ALi m5602 Webcam support" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the + ALi m5602 connected to various image sensors. + + See for more info. + + To compile this driver as a module, choose M here: the + module will be called gspca-m5602. diff --git a/drivers/media/video/gspca/m5602/Makefile b/drivers/media/video/gspca/m5602/Makefile new file mode 100644 index 00000000000..226ab4fc9d6 --- /dev/null +++ b/drivers/media/video/gspca/m5602/Makefile @@ -0,0 +1,11 @@ +obj-$(CONFIG_USB_M5602) += gspca_m5602.o + +gspca_m5602-objs := m5602_core.o \ + m5602_ov9650.o \ + m5602_mt9m111.o \ + m5602_po1030.o \ + m5602_s5k83a.o \ + m5602_s5k4aa.o + +EXTRA_CFLAGS += -Idrivers/media/video/gspca + diff --git a/drivers/media/video/gspca/m5602/m5602_bridge.h b/drivers/media/video/gspca/m5602/m5602_bridge.h new file mode 100644 index 00000000000..fcbc37bfea5 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_bridge.h @@ -0,0 +1,180 @@ +/* + * USB Driver for ALi m5602 based webcams + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_BRIDGE_H_ +#define M5602_BRIDGE_H_ + +#include "gspca.h" + +#define MODULE_NAME "ALi m5602" + +/*****************************************************************************/ + +#undef PDEBUG +#undef info +#undef err + +#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \ + format "\n" , ## arg) +#define info(format, arg...) printk(KERN_INFO KBUILD_MODNAME ": " \ + format "\n" , ## arg) + +/* Debug parameters */ +#define DBG_INIT 0x1 +#define DBG_PROBE 0x2 +#define DBG_V4L2 0x4 +#define DBG_TRACE 0x8 +#define DBG_DATA 0x10 +#define DBG_V4L2_CID 0x20 +#define DBG_GSPCA 0x40 + +#define PDEBUG(level, fmt, args...) \ + do { \ + if (m5602_debug & level) \ + info("[%s:%d] " fmt, __func__, __LINE__ , \ + ## args); \ + } while (0) + +/*****************************************************************************/ + +#define M5602_XB_SENSOR_TYPE 0x00 +#define M5602_XB_SENSOR_CTRL 0x01 +#define M5602_XB_LINE_OF_FRAME_H 0x02 +#define M5602_XB_LINE_OF_FRAME_L 0x03 +#define M5602_XB_PIX_OF_LINE_H 0x04 +#define M5602_XB_PIX_OF_LINE_L 0x05 +#define M5602_XB_VSYNC_PARA 0x06 +#define M5602_XB_HSYNC_PARA 0x07 +#define M5602_XB_TEST_MODE_1 0x08 +#define M5602_XB_TEST_MODE_2 0x09 +#define M5602_XB_SIG_INI 0x0a +#define M5602_XB_DS_PARA 0x0e +#define M5602_XB_TRIG_PARA 0x0f +#define M5602_XB_CLK_PD 0x10 +#define M5602_XB_MCU_CLK_CTRL 0x12 +#define M5602_XB_MCU_CLK_DIV 0x13 +#define M5602_XB_SEN_CLK_CTRL 0x14 +#define M5602_XB_SEN_CLK_DIV 0x15 +#define M5602_XB_AUD_CLK_CTRL 0x16 +#define M5602_XB_AUD_CLK_DIV 0x17 +#define M5602_XB_DEVCTR1 0x41 +#define M5602_XB_EPSETR0 0x42 +#define M5602_XB_EPAFCTR 0x47 +#define M5602_XB_EPBFCTR 0x49 +#define M5602_XB_EPEFCTR 0x4f +#define M5602_XB_TEST_REG 0x53 +#define M5602_XB_ALT2SIZE 0x54 +#define M5602_XB_ALT3SIZE 0x55 +#define M5602_XB_OBSFRAME 0x56 +#define M5602_XB_PWR_CTL 0x59 +#define M5602_XB_ADC_CTRL 0x60 +#define M5602_XB_ADC_DATA 0x61 +#define M5602_XB_MISC_CTRL 0x62 +#define M5602_XB_SNAPSHOT 0x63 +#define M5602_XB_SCRATCH_1 0x64 +#define M5602_XB_SCRATCH_2 0x65 +#define M5602_XB_SCRATCH_3 0x66 +#define M5602_XB_SCRATCH_4 0x67 +#define M5602_XB_I2C_CTRL 0x68 +#define M5602_XB_I2C_CLK_DIV 0x69 +#define M5602_XB_I2C_DEV_ADDR 0x6a +#define M5602_XB_I2C_REG_ADDR 0x6b +#define M5602_XB_I2C_DATA 0x6c +#define M5602_XB_I2C_STATUS 0x6d +#define M5602_XB_GPIO_DAT_H 0x70 +#define M5602_XB_GPIO_DAT_L 0x71 +#define M5602_XB_GPIO_DIR_H 0x72 +#define M5602_XB_GPIO_DIR_L 0x73 +#define M5602_XB_GPIO_EN_H 0x74 +#define M5602_XB_GPIO_EN_L 0x75 +#define M5602_XB_GPIO_DAT 0x76 +#define M5602_XB_GPIO_DIR 0x77 +#define M5602_XB_MISC_CTL 0x70 + +#define I2C_BUSY 0x80 + +/*****************************************************************************/ + +/* Driver info */ +#define DRIVER_AUTHOR "ALi m5602 Linux Driver Project" +#define DRIVER_DESC "ALi m5602 webcam driver" + +#define M5602_ISOC_ENDPOINT_ADDR 0x81 +#define M5602_INTR_ENDPOINT_ADDR 0x82 + +#define M5602_MAX_FRAMES 32 +#define M5602_URBS 2 +#define M5602_ISOC_PACKETS 14 + +#define M5602_URB_TIMEOUT msecs_to_jiffies(2 * M5602_ISOC_PACKETS) +#define M5602_URB_MSG_TIMEOUT 5000 +#define M5602_FRAME_TIMEOUT 2 + +/*****************************************************************************/ + +/* A skeleton used for sending messages to the m5602 bridge */ +static const unsigned char bridge_urb_skeleton[] = { + 0x13, 0x00, 0x81, 0x00 +}; + +/* A skeleton used for sending messages to the sensor */ +static const unsigned char sensor_urb_skeleton[] = { + 0x23, M5602_XB_GPIO_EN_H, 0x81, 0x06, + 0x23, M5602_XB_MISC_CTRL, 0x81, 0x80, + 0x13, M5602_XB_I2C_DEV_ADDR, 0x81, 0x00, + 0x13, M5602_XB_I2C_REG_ADDR, 0x81, 0x00, + 0x13, M5602_XB_I2C_DATA, 0x81, 0x00, + 0x13, M5602_XB_I2C_CTRL, 0x81, 0x11 +}; + +/* m5602 device descriptor, currently it just wraps the m5602_camera struct */ +struct sd { + struct gspca_dev gspca_dev; + + /* The name of the m5602 camera */ + char *name; + + /* A pointer to the currently connected sensor */ + struct m5602_sensor *sensor; + + /* The current frame's id, used to detect frame boundaries */ + u8 frame_id; + + /* The current frame count */ + u32 frame_count; +}; + +int m5602_read_bridge( + struct sd *sd, u8 address, u8 *i2c_data); + +int m5602_write_bridge( + struct sd *sd, u8 address, u8 i2c_data); + +int m5602_configure(struct gspca_dev *gspca_dev, + const struct usb_device_id *id); + +int m5602_init(struct gspca_dev *gspca_dev); + +void m5602_start_transfer(struct gspca_dev *gspca_dev); + +void m5602_stop_transfer(struct gspca_dev *gspca_dev); + +void m5602_urb_complete(struct gspca_dev *gspca_dev, struct gspca_frame *frame, + __u8 *data, int len); + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c new file mode 100644 index 00000000000..559495e2d11 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -0,0 +1,321 @@ +/* + * USB Driver for ALi m5602 based webcams + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_ov9650.h" +#include "m5602_mt9m111.h" +#include "m5602_po1030.h" +#include "m5602_s5k83a.h" +#include "m5602_s5k4aa.h" + +/* Kernel module parameters */ +int force_sensor; +int dump_bridge; +int dump_sensor; +unsigned int m5602_debug; + +static const __devinitdata struct usb_device_id m5602_table[] = { + {USB_DEVICE(0x0402, 0x5602)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, m5602_table); + +/* sub-driver description, the ctrl and nctrl is filled at probe time */ +static struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = m5602_configure, + .init = m5602_init, + .start = m5602_start_transfer, + .stopN = m5602_stop_transfer, + .pkt_scan = m5602_urb_complete +}; + +/* Reads a byte from the m5602 */ +int m5602_read_bridge(struct sd *sd, u8 address, u8 *i2c_data) +{ + int err; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x04, 0xc0, 0x14, + 0x8100 + address, buf, + 1, M5602_URB_MSG_TIMEOUT); + *i2c_data = buf[0]; + + PDEBUG(DBG_TRACE, "Reading bridge register 0x%x containing 0x%x", + address, *i2c_data); + + /* usb_control_msg(...) returns the number of bytes sent upon success, + mask that and return zero upon success instead*/ + return (err < 0) ? err : 0; +} + +/* Writes a byte to to the m5602 */ +int m5602_write_bridge(struct sd *sd, u8 address, u8 i2c_data) +{ + int err; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + PDEBUG(DBG_TRACE, "Writing bridge register 0x%x with 0x%x", + address, i2c_data); + + memcpy(buf, bridge_urb_skeleton, + sizeof(bridge_urb_skeleton)); + buf[1] = address; + buf[3] = i2c_data; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 4, M5602_URB_MSG_TIMEOUT); + + /* usb_control_msg(...) returns the number of bytes sent upon success, + mask that and return zero upon success instead */ + return (err < 0) ? err : 0; +} + +/* Dump all the registers of the m5602 bridge, + unfortunately this breaks the camera until it's power cycled */ +static void m5602_dump_bridge(struct sd *sd) +{ + int i; + for (i = 0; i < 0x80; i++) { + unsigned char val = 0; + m5602_read_bridge(sd, i, &val); + info("ALi m5602 address 0x%x contains 0x%x", i, val); + } + info("Warning: The camera probably won't work until it's power cycled"); +} + +int m5602_probe_sensor(struct sd *sd) +{ + /* Try the po1030 */ + sd->sensor = &po1030; + if (!sd->sensor->probe(sd)) { + sd_desc.ctrls = po1030.ctrls; + sd_desc.nctrls = po1030.nctrls; + return 0; + } + + /* Try the mt9m111 sensor */ + sd->sensor = &mt9m111; + if (!sd->sensor->probe(sd)) { + sd_desc.ctrls = mt9m111.ctrls; + sd_desc.nctrls = mt9m111.nctrls; + return 0; + } + + /* Try the s5k4aa */ + sd->sensor = &s5k4aa; + if (!sd->sensor->probe(sd)) { + sd_desc.ctrls = s5k4aa.ctrls; + sd_desc.nctrls = s5k4aa.nctrls; + return 0; + } + + /* Try the ov9650 */ + sd->sensor = &ov9650; + if (!sd->sensor->probe(sd)) { + sd_desc.ctrls = ov9650.ctrls; + sd_desc.nctrls = ov9650.nctrls; + return 0; + } + + /* Try the s5k83a */ + sd->sensor = &s5k83a; + if (!sd->sensor->probe(sd)) { + sd_desc.ctrls = s5k83a.ctrls; + sd_desc.nctrls = s5k83a.nctrls; + return 0; + } + + + /* More sensor probe function goes here */ + info("Failed to find a sensor"); + sd->sensor = NULL; + return -ENODEV; +} + +int m5602_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int err; + + PDEBUG(DBG_TRACE, "Initializing ALi m5602 webcam"); + /* Run the init sequence */ + err = sd->sensor->init(sd); + + return err; +} + +void m5602_start_transfer(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* Send start command to the camera */ + const u8 buffer[4] = {0x13, 0xf9, 0x0f, 0x01}; + memcpy(buf, buffer, sizeof(buffer)); + usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), + 0x04, 0x40, 0x19, 0x0000, buf, + 4, M5602_URB_MSG_TIMEOUT); + + PDEBUG(DBG_V4L2, "Transfer started"); +} + +void m5602_urb_complete(struct gspca_dev *gspca_dev, struct gspca_frame *frame, + __u8 *data, int len) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (len < 6) { + PDEBUG(DBG_DATA, "Packet is less than 6 bytes"); + return; + } + + /* Frame delimiter: ff xx xx xx ff ff */ + if (data[0] == 0xff && data[4] == 0xff && data[5] == 0xff && + data[2] != sd->frame_id) { + PDEBUG(DBG_DATA, "Frame delimiter detected"); + sd->frame_id = data[2]; + + /* Remove the extra fluff appended on each header */ + data += 6; + len -= 6; + + /* Complete the last frame (if any) */ + frame = gspca_frame_add(gspca_dev, LAST_PACKET, + frame, data, 0); + + /* Create a new frame */ + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); + + PDEBUG(DBG_V4L2, "Starting new frame. First urb contained %d", + len); + + } else { + int cur_frame_len = frame->data_end - frame->data; + + /* Remove urb header */ + data += 4; + len -= 4; + + if (cur_frame_len + len <= frame->v4l2_buf.length) { + PDEBUG(DBG_DATA, "Continuing frame copying %d bytes", + len); + + gspca_frame_add(gspca_dev, INTER_PACKET, frame, + data, len); + } else if (frame->v4l2_buf.length - cur_frame_len > 0) { + /* Add the remaining data up to frame size */ + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, + frame->v4l2_buf.length - cur_frame_len); + } + } +} + +void m5602_stop_transfer(struct gspca_dev *gspca_dev) +{ + /* Is there are a command to stop a data transfer? */ +} + +/* this function is called at probe time */ +int m5602_configure(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam; + int err; + + PDEBUG(DBG_GSPCA, "m5602_configure start"); + cam = &gspca_dev->cam; + cam->epaddr = M5602_ISOC_ENDPOINT_ADDR; + + if (dump_bridge) + m5602_dump_bridge(sd); + + /* Probe sensor */ + err = m5602_probe_sensor(sd); + if (err) + goto fail; + + PDEBUG(DBG_GSPCA, "m5602_configure end"); + return 0; + +fail: + PDEBUG(DBG_GSPCA, "m5602_configure failed"); + cam->cam_mode = NULL; + cam->nmodes = 0; + + return err; +} + +static int m5602_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = m5602_table, + .probe = m5602_probe, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif + .disconnect = gspca_disconnect +}; + +/* -- module insert / remove -- */ +static int __init mod_m5602_init(void) +{ + if (usb_register(&sd_driver) < 0) + return -1; + PDEBUG(D_PROBE, "m5602 module registered"); + return 0; +} +static void __exit mod_m5602_exit(void) +{ + usb_deregister(&sd_driver); + PDEBUG(D_PROBE, "m5602 module deregistered"); +} + +module_init(mod_m5602_init); +module_exit(mod_m5602_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +module_param_named(debug, m5602_debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "toggles debug on/off"); + +module_param(force_sensor, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(force_sensor, + "force detection of sensor, " + "1 = OV9650, 2 = S5K83A, 3 = S5K4AA, 4 = MT9M111, 5 = PO1030"); + +module_param(dump_bridge, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dump_bridge, "Dumps all usb bridge registers at startup"); + +module_param(dump_sensor, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dump_sensor, "Dumps all usb sensor registers " + "at startup providing a sensor is found"); diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.c b/drivers/media/video/gspca/m5602/m5602_mt9m111.c new file mode 100644 index 00000000000..17f04dd5e1d --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.c @@ -0,0 +1,343 @@ +/* + * Driver for the mt9m111 sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_mt9m111.h" + +int mt9m111_probe(struct sd *sd) +{ + u8 data[2] = {0x00, 0x00}; + int i; + + if (force_sensor) { + if (force_sensor == MT9M111_SENSOR) { + info("Forcing a %s sensor", mt9m111.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a mt9m111 sensor"); + + /* Do the preinit */ + for (i = 0; i < ARRAY_SIZE(preinit_mt9m111); i++) { + if (preinit_mt9m111[i][0] == BRIDGE) { + m5602_write_bridge(sd, + preinit_mt9m111[i][1], + preinit_mt9m111[i][2]); + } else { + data[0] = preinit_mt9m111[i][2]; + data[1] = preinit_mt9m111[i][3]; + mt9m111_write_sensor(sd, + preinit_mt9m111[i][1], data, 2); + } + } + + if (mt9m111_read_sensor(sd, MT9M111_SC_CHIPVER, data, 2)) + return -ENODEV; + + if ((data[0] == 0x14) && (data[1] == 0x3a)) { + info("Detected a mt9m111 sensor"); + goto sensor_found; + } + + return -ENODEV; + +sensor_found: + sd->gspca_dev.cam.cam_mode = mt9m111.modes; + sd->gspca_dev.cam.nmodes = mt9m111.nmodes; + return 0; +} + +int mt9m111_init(struct sd *sd) +{ + int i, err; + + /* Init the sensor */ + for (i = 0; i < ARRAY_SIZE(init_mt9m111); i++) { + u8 data[2]; + + if (init_mt9m111[i][0] == BRIDGE) { + err = m5602_write_bridge(sd, + init_mt9m111[i][1], + init_mt9m111[i][2]); + } else { + data[0] = init_mt9m111[i][2]; + data[1] = init_mt9m111[i][3]; + err = mt9m111_write_sensor(sd, + init_mt9m111[i][1], data, 2); + } + } + + if (dump_sensor) + mt9m111_dump_registers(sd); + + return (err < 0) ? err : 0; +} + +int mt9m111_power_down(struct sd *sd) +{ + return 0; +} + +int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); + *val = data[0] & MT9M111_RMB_MIRROR_ROWS; + PDEBUG(DBG_V4L2_CID, "Read vertical flip %d", *val); + + return (err < 0) ? err : 0; +} + +int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set vertical flip to %d", val); + + /* Set the correct page map */ + err = mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, data, 2); + if (err < 0) + goto out; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, data, 2); + if (err < 0) + goto out; + + data[0] = (data[0] & 0xfe) | val; + err = mt9m111_write_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); +out: + return (err < 0) ? err : 0; +} + +int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); + *val = data[0] & MT9M111_RMB_MIRROR_COLS; + PDEBUG(DBG_V4L2_CID, "Read horizontal flip %d", *val); + + return (err < 0) ? err : 0; +} + +int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set horizontal flip to %d", val); + + /* Set the correct page map */ + err = mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, data, 2); + if (err < 0) + goto out; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, data, 2); + if (err < 0) + goto out; + + data[0] = (data[0] & 0xfd) | ((val << 1) & 0x02); + err = mt9m111_write_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); +out: + return (err < 0) ? err : 0; +} + +int mt9m111_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err, tmp; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + err = mt9m111_read_sensor(sd, MT9M111_SC_GLOBAL_GAIN, data, 2); + tmp = ((data[1] << 8) | data[0]); + + *val = ((tmp & (1 << 10)) * 2) | + ((tmp & (1 << 9)) * 2) | + ((tmp & (1 << 8)) * 2) | + (tmp & 0x7f); + + PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); + + return (err < 0) ? err : 0; +} + +int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err, tmp; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + /* Set the correct page map */ + err = mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, data, 2); + if (err < 0) + goto out; + + if (val >= INITIAL_MAX_GAIN * 2 * 2 * 2) + return -EINVAL; + + if ((val >= INITIAL_MAX_GAIN * 2 * 2) && + (val < (INITIAL_MAX_GAIN - 1) * 2 * 2 * 2)) + tmp = (1 << 10) | (val << 9) | + (val << 8) | (val / 8); + else if ((val >= INITIAL_MAX_GAIN * 2) && + (val < INITIAL_MAX_GAIN * 2 * 2)) + tmp = (1 << 9) | (1 << 8) | (val / 4); + else if ((val >= INITIAL_MAX_GAIN) && + (val < INITIAL_MAX_GAIN * 2)) + tmp = (1 << 8) | (val / 2); + else + tmp = val; + + data[1] = (tmp & 0xff00) >> 8; + data[0] = (tmp & 0xff); + PDEBUG(DBG_V4L2_CID, "tmp=%d, data[1]=%d, data[0]=%d", tmp, + data[1], data[0]); + + err = mt9m111_write_sensor(sd, MT9M111_SC_GLOBAL_GAIN, + data, 2); +out: + return (err < 0) ? err : 0; +} + +int mt9m111_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) { + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x1a); + if (err < 0) + goto out; + + for (i = 0; i < len && !err; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(DBG_TRACE, "Reading sensor register " + "0x%x contains 0x%x ", address, *i2c_data); + } +out: + return (err < 0) ? err : 0; +} + +int mt9m111_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* No sensor with a data width larger + than 16 bits has yet been seen, nor with 0 :p*/ + if (len > 2 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +void mt9m111_dump_registers(struct sd *sd) +{ + u8 address, value[2] = {0x00, 0x00}; + + info("Dumping the mt9m111 register state"); + + info("Dumping the mt9m111 sensor core registers"); + value[1] = MT9M111_SENSOR_CORE; + mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, value, 2); + for (address = 0; address < 0xff; address++) { + mt9m111_read_sensor(sd, address, value, 2); + info("register 0x%x contains 0x%x%x", + address, value[0], value[1]); + } + + info("Dumping the mt9m111 color pipeline registers"); + value[1] = MT9M111_COLORPIPE; + mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, value, 2); + for (address = 0; address < 0xff; address++) { + mt9m111_read_sensor(sd, address, value, 2); + info("register 0x%x contains 0x%x%x", + address, value[0], value[1]); + } + + info("Dumping the mt9m111 camera control registers"); + value[1] = MT9M111_CAMERA_CONTROL; + mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, value, 2); + for (address = 0; address < 0xff; address++) { + mt9m111_read_sensor(sd, address, value, 2); + info("register 0x%x contains 0x%x%x", + address, value[0], value[1]); + } + + info("mt9m111 register state dump complete"); +} diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.h b/drivers/media/video/gspca/m5602/m5602_mt9m111.h new file mode 100644 index 00000000000..79a5d887819 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.h @@ -0,0 +1,1020 @@ +/* + * Driver for the mt9m111 sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * Some defines taken from the mt9m111 sensor driver + * Copyright (C) 2008, Robert Jarzmik + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_MT9M111_H_ +#define M5602_MT9M111_H_ + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define MT9M111_SC_CHIPVER 0x00 +#define MT9M111_SC_ROWSTART 0x01 +#define MT9M111_SC_COLSTART 0x02 +#define MT9M111_SC_WINDOW_HEIGHT 0x03 +#define MT9M111_SC_WINDOW_WIDTH 0x04 +#define MT9M111_SC_HBLANK_CONTEXT_B 0x05 +#define MT9M111_SC_VBLANK_CONTEXT_B 0x06 +#define MT9M111_SC_HBLANK_CONTEXT_A 0x07 +#define MT9M111_SC_VBLANK_CONTEXT_A 0x08 +#define MT9M111_SC_SHUTTER_WIDTH 0x09 +#define MT9M111_SC_ROW_SPEED 0x0a + +#define MT9M111_SC_EXTRA_DELAY 0x0b +#define MT9M111_SC_SHUTTER_DELAY 0x0c +#define MT9M111_SC_RESET 0x0d +#define MT9M111_SC_R_MODE_CONTEXT_B 0x20 +#define MT9M111_SC_R_MODE_CONTEXT_A 0x21 +#define MT9M111_SC_FLASH_CONTROL 0x23 +#define MT9M111_SC_GREEN_1_GAIN 0x2b +#define MT9M111_SC_BLUE_GAIN 0x2c +#define MT9M111_SC_RED_GAIN 0x2d +#define MT9M111_SC_GREEN_2_GAIN 0x2e +#define MT9M111_SC_GLOBAL_GAIN 0x2f + +#define MT9M111_RMB_MIRROR_ROWS (1 << 0) +#define MT9M111_RMB_MIRROR_COLS (1 << 1) + +#define MT9M111_CONTEXT_CONTROL 0xc8 +#define MT9M111_PAGE_MAP 0xf0 +#define MT9M111_BYTEWISE_ADDRESS 0xf1 + +#define MT9M111_CP_OPERATING_MODE_CTL 0x06 +#define MT9M111_CP_LUMA_OFFSET 0x34 +#define MT9M111_CP_LUMA_CLIP 0x35 +#define MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A 0x3a +#define MT9M111_CP_LENS_CORRECTION_1 0x3b +#define MT9M111_CP_DEFECT_CORR_CONTEXT_A 0x4c +#define MT9M111_CP_DEFECT_CORR_CONTEXT_B 0x4d +#define MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B 0x9b +#define MT9M111_CP_GLOBAL_CLK_CONTROL 0xb3 + +#define MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18 0x65 +#define MT9M111_CC_AWB_PARAMETER_7 0x28 + +#define MT9M111_SENSOR_CORE 0x00 +#define MT9M111_COLORPIPE 0x01 +#define MT9M111_CAMERA_CONTROL 0x02 + +#define INITIAL_MAX_GAIN 64 +#define DEFAULT_GAIN 283 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; +extern unsigned int m5602_debug; + +int mt9m111_probe(struct sd *sd); +int mt9m111_init(struct sd *sd); +int mt9m111_power_down(struct sd *sd); + +int mt9m111_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int mt9m111_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +void mt9m111_dump_registers(struct sd *sd); + +int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +int mt9m111_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor mt9m111 = { + .name = "MT9M111", + + .i2c_slave_id = 0xba, + + .probe = mt9m111_probe, + .init = mt9m111_init, + .power_down = mt9m111_power_down, + + .read_sensor = mt9m111_read_sensor, + .write_sensor = mt9m111_write_sensor, + + .nctrls = 3, + .ctrls = { + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = mt9m111_set_vflip, + .get = mt9m111_get_vflip + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = mt9m111_set_hflip, + .get = mt9m111_get_hflip + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0, + .maximum = (INITIAL_MAX_GAIN - 1) * 2 * 2 * 2, + .step = 1, + .default_value = DEFAULT_GAIN, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = mt9m111_set_hflip, + .get = mt9m111_get_hflip + } + }, + + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_mt9m111[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xf7}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00} +}; + +static const unsigned char init_mt9m111[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xff}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xff}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xde}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xff}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xf7}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0xff, 0xff}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x12}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x00}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x10}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x0f}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x0f}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe3, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0x90}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xe6}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x12}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x00}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x10}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x0f}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x0f}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe0, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + /* Set number of blank rows chosen to 400 */ + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0x90}, + /* Set the global gain to 283 (of 512) */ + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x03, 0x63} +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c new file mode 100644 index 00000000000..74c3ffec0ca --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c @@ -0,0 +1,544 @@ +/* + * Driver for the ov9650 sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_ov9650.h" + +int ov9650_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + /* The ov9650 registers have a max depth of one byte */ + if (len > 1 || !len) + return -EINVAL; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + + m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + ov9650.i2c_slave_id); + m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x10 + len); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x08); + + for (i = 0; i < len; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(DBG_TRACE, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } + return (err < 0) ? err : 0; +} + +int ov9650_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* The ov9650 only supports one byte writes */ + if (len > 1 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + /* Special case larger sensor writes */ + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int ov9650_probe(struct sd *sd) +{ + u8 prod_id = 0, ver_id = 0, i; + + if (force_sensor) { + if (force_sensor == OV9650_SENSOR) { + info("Forcing an %s sensor", ov9650.name); + goto sensor_found; + } + /* If we want to force another sensor, + don't try to probe this one */ + return -ENODEV; + } + + info("Probing for an ov9650 sensor"); + + /* Run the pre-init to actually probe the unit */ + for (i = 0; i < ARRAY_SIZE(preinit_ov9650); i++) { + u8 data = preinit_ov9650[i][2]; + if (preinit_ov9650[i][0] == SENSOR) + ov9650_write_sensor(sd, + preinit_ov9650[i][1], &data, 1); + else + m5602_write_bridge(sd, preinit_ov9650[i][1], data); + } + + if (ov9650_read_sensor(sd, OV9650_PID, &prod_id, 1)) + return -ENODEV; + + if (ov9650_read_sensor(sd, OV9650_VER, &ver_id, 1)) + return -ENODEV; + + if ((prod_id == 0x96) && (ver_id == 0x52)) { + info("Detected an ov9650 sensor"); + goto sensor_found; + } + + return -ENODEV; + +sensor_found: + sd->gspca_dev.cam.cam_mode = ov9650.modes; + sd->gspca_dev.cam.nmodes = ov9650.nmodes; + return 0; +} + +int ov9650_init(struct sd *sd) +{ + int i, err = 0; + u8 data; + + if (dump_sensor) + ov9650_dump_registers(sd); + + for (i = 0; i < ARRAY_SIZE(init_ov9650) && !err; i++) { + data = init_ov9650[i][2]; + if (init_ov9650[i][0] == SENSOR) + err = ov9650_write_sensor(sd, init_ov9650[i][1], + &data, 1); + else + err = m5602_write_bridge(sd, init_ov9650[i][1], data); + } + + if (!err && dmi_check_system(ov9650_flip_dmi_table)) { + info("vflip quirk active"); + data = 0x30; + err = ov9650_write_sensor(sd, OV9650_MVFP, &data, 1); + } + + return (err < 0) ? err : 0; +} + +int ov9650_power_down(struct sd *sd) +{ + int i; + for (i = 0; i < ARRAY_SIZE(power_down_ov9650); i++) { + u8 data = power_down_ov9650[i][2]; + if (power_down_ov9650[i][0] == SENSOR) + ov9650_write_sensor(sd, + power_down_ov9650[i][1], &data, 1); + else + m5602_write_bridge(sd, power_down_ov9650[i][1], data); + } + + return 0; +} + +int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = ov9650_read_sensor(sd, OV9650_COM1, &i2c_data, 1); + if (err < 0) + goto out; + *val = i2c_data & 0x03; + + err = ov9650_read_sensor(sd, OV9650_AECH, &i2c_data, 1); + if (err < 0) + goto out; + *val |= (i2c_data << 2); + + err = ov9650_read_sensor(sd, OV9650_AECHM, &i2c_data, 1); + if (err < 0) + goto out; + *val |= (i2c_data & 0x3f) << 10; + + PDEBUG(DBG_V4L2_CID, "Read exposure %d", *val); +out: + return (err < 0) ? err : 0; +} + +int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + PDEBUG(DBG_V4L2_CID, "Set exposure to %d", + val & 0xffff); + + /* The 6 MSBs */ + i2c_data = (val >> 10) & 0x3f; + err = ov9650_write_sensor(sd, OV9650_AECHM, + &i2c_data, 1); + if (err < 0) + goto out; + + /* The 8 middle bits */ + i2c_data = (val >> 2) & 0xff; + err = ov9650_write_sensor(sd, OV9650_AECH, + &i2c_data, 1); + if (err < 0) + goto out; + + /* The 2 LSBs */ + i2c_data = val & 0x03; + err = ov9650_write_sensor(sd, OV9650_COM1, &i2c_data, 1); + +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + *val = (i2c_data & 0x03) << 8; + + err = ov9650_read_sensor(sd, OV9650_GAIN, &i2c_data, 1); + *val |= i2c_data; + PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); + return (err < 0) ? err : 0; +} + +int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + /* The 2 MSB */ + /* Read the OV9650_VREF register first to avoid + corrupting the VREF high and low bits */ + ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + /* Mask away all uninteresting bits */ + i2c_data = ((val & 0x0300) >> 2) | + (i2c_data & 0x3F); + err = ov9650_write_sensor(sd, OV9650_VREF, &i2c_data, 1); + + /* The 8 LSBs */ + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_GAIN, &i2c_data, 1); + return (err < 0) ? err : 0; +} + +int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_RED, &i2c_data, 1); + *val = i2c_data; + + PDEBUG(DBG_V4L2_CID, "Read red gain %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set red gain to %d", + val & 0xff); + + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_RED, &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_BLUE, &i2c_data, 1); + *val = i2c_data; + + PDEBUG(DBG_V4L2_CID, "Read blue gain %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set blue gain to %d", + val & 0xff); + + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_BLUE, &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (dmi_check_system(ov9650_flip_dmi_table)) + *val = ((i2c_data & OV9650_HFLIP) >> 5) ? 0 : 1; + else + *val = (i2c_data & OV9650_HFLIP) >> 5; + PDEBUG(DBG_V4L2_CID, "Read horizontal flip %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set horizontal flip to %d", val); + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (err < 0) + goto out; + + if (dmi_check_system(ov9650_flip_dmi_table)) + i2c_data = ((i2c_data & 0xdf) | + (((val ? 0 : 1) & 0x01) << 5)); + else + i2c_data = ((i2c_data & 0xdf) | + ((val & 0x01) << 5)); + + err = ov9650_write_sensor(sd, OV9650_MVFP, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (dmi_check_system(ov9650_flip_dmi_table)) + *val = ((i2c_data & 0x10) >> 4) ? 0 : 1; + else + *val = (i2c_data & 0x10) >> 4; + PDEBUG(DBG_V4L2_CID, "Read vertical flip %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set vertical flip to %d", val); + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (err < 0) + goto out; + + if (dmi_check_system(ov9650_flip_dmi_table)) + i2c_data = ((i2c_data & 0xef) | + (((val ? 0 : 1) & 0x01) << 4)); + else + i2c_data = ((i2c_data & 0xef) | + ((val & 0x01) << 4)); + + err = ov9650_write_sensor(sd, OV9650_MVFP, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_brightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + if (err < 0) + goto out; + *val = (i2c_data & 0x03) << 8; + + err = ov9650_read_sensor(sd, OV9650_GAIN, &i2c_data, 1); + *val |= i2c_data; + PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); +out: + return (err < 0) ? err : 0; +} + +int ov9650_set_brightness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set gain to %d", val & 0x3ff); + + /* Read the OV9650_VREF register first to avoid + corrupting the VREF high and low bits */ + err = ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + if (err < 0) + goto out; + + /* Mask away all uninteresting bits */ + i2c_data = ((val & 0x0300) >> 2) | (i2c_data & 0x3F); + err = ov9650_write_sensor(sd, OV9650_VREF, &i2c_data, 1); + if (err < 0) + goto out; + + /* The 8 LSBs */ + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_GAIN, &i2c_data, 1); + +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + *val = (i2c_data & OV9650_AWB_EN) >> 1; + PDEBUG(DBG_V4L2_CID, "Read auto white balance %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set auto white balance to %d", val); + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + if (err < 0) + goto out; + + i2c_data = ((i2c_data & 0xfd) | ((val & 0x01) << 1)); + err = ov9650_write_sensor(sd, OV9650_COM8, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + *val = (i2c_data & OV9650_AGC_EN) >> 2; + PDEBUG(DBG_V4L2_CID, "Read auto gain control %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set auto gain control to %d", val); + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + if (err < 0) + goto out; + + i2c_data = ((i2c_data & 0xfb) | ((val & 0x01) << 2)); + err = ov9650_write_sensor(sd, OV9650_COM8, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +void ov9650_dump_registers(struct sd *sd) +{ + int address; + info("Dumping the ov9650 register state"); + for (address = 0; address < 0xa9; address++) { + u8 value; + ov9650_read_sensor(sd, address, &value, 1); + info("register 0x%x contains 0x%x", + address, value); + } + + info("ov9650 register state dump complete"); + + info("Probing for which registers that are read/write"); + for (address = 0; address < 0xff; address++) { + u8 old_value, ctrl_value; + u8 test_value[2] = {0xff, 0xff}; + + ov9650_read_sensor(sd, address, &old_value, 1); + ov9650_write_sensor(sd, address, test_value, 1); + ov9650_read_sensor(sd, address, &ctrl_value, 1); + + if (ctrl_value == test_value[0]) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original value */ + ov9650_write_sensor(sd, address, &old_value, 1); + } +} diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.h b/drivers/media/video/gspca/m5602/m5602_ov9650.h new file mode 100644 index 00000000000..486ea337a8b --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.h @@ -0,0 +1,501 @@ +/* + * Driver for the ov9650 sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_OV9650_H_ +#define M5602_OV9650_H_ + +#include + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define OV9650_GAIN 0x00 +#define OV9650_BLUE 0x01 +#define OV9650_RED 0x02 +#define OV9650_VREF 0x03 +#define OV9650_COM1 0x04 +#define OV9650_BAVE 0x05 +#define OV9650_GEAVE 0x06 +#define OV9650_RSVD7 0x07 +#define OV9650_PID 0x0a +#define OV9650_VER 0x0b +#define OV9650_COM3 0x0c +#define OV9650_COM5 0x0e +#define OV9650_COM6 0x0f +#define OV9650_AECH 0x10 +#define OV9650_CLKRC 0x11 +#define OV9650_COM7 0x12 +#define OV9650_COM8 0x13 +#define OV9650_COM9 0x14 +#define OV9650_COM10 0x15 +#define OV9650_RSVD16 0x16 +#define OV9650_HSTART 0x17 +#define OV9650_HSTOP 0x18 +#define OV9650_VSTRT 0x19 +#define OV9650_VSTOP 0x1a +#define OV9650_PSHFT 0x1b +#define OV9650_MVFP 0x1e +#define OV9650_AEW 0x24 +#define OV9650_AEB 0x25 +#define OV9650_VPT 0x26 +#define OV9650_BBIAS 0x27 +#define OV9650_GbBIAS 0x28 +#define OV9650_Gr_COM 0x29 +#define OV9650_RBIAS 0x2c +#define OV9650_HREF 0x32 +#define OV9650_CHLF 0x33 +#define OV9650_ARBLM 0x34 +#define OV9650_RSVD35 0x35 +#define OV9650_RSVD36 0x36 +#define OV9650_ADC 0x37 +#define OV9650_ACOM38 0x38 +#define OV9650_OFON 0x39 +#define OV9650_TSLB 0x3a +#define OV9650_COM12 0x3c +#define OV9650_COM13 0x3d +#define OV9650_COM15 0x40 +#define OV9650_COM16 0x41 +#define OV9650_LCC1 0x62 +#define OV9650_LCC2 0x63 +#define OV9650_LCC3 0x64 +#define OV9650_LCC4 0x65 +#define OV9650_LCC5 0x66 +#define OV9650_HV 0x69 +#define OV9650_DBLV 0x6b +#define OV9650_COM21 0x8b +#define OV9650_COM22 0x8c +#define OV9650_COM24 0x8e +#define OV9650_DBLC1 0x8f +#define OV9650_RSVD94 0x94 +#define OV9650_RSVD95 0x95 +#define OV9650_RSVD96 0x96 +#define OV9650_LCCFB 0x9d +#define OV9650_LCCFR 0x9e +#define OV9650_AECHM 0xa1 +#define OV9650_COM26 0xa5 +#define OV9650_ACOMA8 0xa8 +#define OV9650_ACOMA9 0xa9 + +#define OV9650_REGISTER_RESET (1 << 7) +#define OV9650_VGA_SELECT (1 << 6) +#define OV9650_RGB_SELECT (1 << 2) +#define OV9650_RAW_RGB_SELECT (1 << 0) + +#define OV9650_FAST_AGC_AEC (1 << 7) +#define OV9650_AEC_UNLIM_STEP_SIZE (1 << 6) +#define OV9650_BANDING (1 << 5) +#define OV9650_AGC_EN (1 << 2) +#define OV9650_AWB_EN (1 << 1) +#define OV9650_AEC_EN (1 << 0) + +#define OV9650_VARIOPIXEL (1 << 2) +#define OV9650_SYSTEM_CLK_SEL (1 << 7) +#define OV9650_SLAM_MODE (1 << 4) + +#define OV9650_VFLIP (1 << 4) +#define OV9650_HFLIP (1 << 5) + +#define GAIN_DEFAULT 0x14 +#define RED_GAIN_DEFAULT 0x70 +#define BLUE_GAIN_DEFAULT 0x20 +#define EXPOSURE_DEFAULT 0x5003 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; +extern unsigned int m5602_debug; + +int ov9650_probe(struct sd *sd); +int ov9650_init(struct sd *sd); +int ov9650_power_down(struct sd *sd); + +int ov9650_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int ov9650_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +void ov9650_dump_registers(struct sd *sd); + +int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_brightness(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_brightness(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor ov9650 = { + .name = "OV9650", + .i2c_slave_id = 0x60, + .probe = ov9650_probe, + .init = ov9650_init, + .power_down = ov9650_power_down, + .read_sensor = ov9650_read_sensor, + .write_sensor = ov9650_write_sensor, + + .nctrls = 8, + .ctrls = { + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0xffff, + .step = 0x1, + .default_value = EXPOSURE_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_exposure, + .get = ov9650_get_exposure + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0x00, + .maximum = 0x3ff, + .step = 0x1, + .default_value = GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_gain, + .get = ov9650_get_gain + }, { + { + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = RED_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_red_balance, + .get = ov9650_get_red_balance + }, { + { + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = BLUE_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_blue_balance, + .get = ov9650_get_blue_balance + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_hflip, + .get = ov9650_get_hflip + }, { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_vflip, + .get = ov9650_get_vflip + }, { + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "auto white balance", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_auto_white_balance, + .get = ov9650_get_auto_white_balance + }, { + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "auto gain control", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_auto_gain, + .get = ov9650_get_auto_gain + } + }, + + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_ov9650[][3] = +{ + /* [INITCAM] */ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a}, + /* Reset chip */ + {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, + /* Enable double clock */ + {SENSOR, OV9650_CLKRC, 0x80}, + /* Do something out of spec with the power */ + {SENSOR, OV9650_OFON, 0x40} +}; + +static const unsigned char init_ov9650[][3] = +{ + /* [INITCAM] */ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a}, + /* Reset chip */ + {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, + /* Enable double clock */ + {SENSOR, OV9650_CLKRC, 0x80}, + /* Do something out of spec with the power */ + {SENSOR, OV9650_OFON, 0x40}, + + /* Set QQVGA */ + {SENSOR, OV9650_COM1, 0x20}, + /* Set fast AGC/AEC algorithm with unlimited step size */ + {SENSOR, OV9650_COM8, OV9650_FAST_AGC_AEC | + OV9650_AEC_UNLIM_STEP_SIZE | + OV9650_AWB_EN | OV9650_AGC_EN}, + + {SENSOR, OV9650_CHLF, 0x10}, + {SENSOR, OV9650_ARBLM, 0xbf}, + {SENSOR, OV9650_ACOM38, 0x81}, + /* Turn off color matrix coefficient double option */ + {SENSOR, OV9650_COM16, 0x00}, + /* Enable color matrix for RGB/YUV, Delay Y channel, + set output Y/UV delay to 1 */ + {SENSOR, OV9650_COM13, 0x19}, + /* Enable digital BLC, Set output mode to U Y V Y */ + {SENSOR, OV9650_TSLB, 0x0c}, + /* Limit the AGC/AEC stable upper region */ + {SENSOR, OV9650_COM24, 0x00}, + /* Enable HREF and some out of spec things */ + {SENSOR, OV9650_COM12, 0x73}, + /* Set all DBLC offset signs to positive and + do some out of spec stuff */ + {SENSOR, OV9650_DBLC1, 0xdf}, + {SENSOR, OV9650_COM21, 0x06}, + {SENSOR, OV9650_RSVD35, 0x91}, + /* Necessary, no camera stream without it */ + {SENSOR, OV9650_RSVD16, 0x06}, + {SENSOR, OV9650_RSVD94, 0x99}, + {SENSOR, OV9650_RSVD95, 0x99}, + {SENSOR, OV9650_RSVD96, 0x04}, + /* Enable full range output */ + {SENSOR, OV9650_COM15, 0x0}, + /* Enable HREF at optical black, enable ADBLC bias, + enable ADBLC, reset timings at format change */ + {SENSOR, OV9650_COM6, 0x4b}, + /* Subtract 32 from the B channel bias */ + {SENSOR, OV9650_BBIAS, 0xa0}, + /* Subtract 32 from the Gb channel bias */ + {SENSOR, OV9650_GbBIAS, 0xa0}, + /* Do not bypass the analog BLC and to some out of spec stuff */ + {SENSOR, OV9650_Gr_COM, 0x00}, + /* Subtract 32 from the R channel bias */ + {SENSOR, OV9650_RBIAS, 0xa0}, + /* Subtract 32 from the R channel bias */ + {SENSOR, OV9650_RBIAS, 0x0}, + {SENSOR, OV9650_COM26, 0x80}, + {SENSOR, OV9650_ACOMA9, 0x98}, + /* Set the AGC/AEC stable region upper limit */ + {SENSOR, OV9650_AEW, 0x68}, + /* Set the AGC/AEC stable region lower limit */ + {SENSOR, OV9650_AEB, 0x5c}, + /* Set the high and low limit nibbles to 3 */ + {SENSOR, OV9650_VPT, 0xc3}, + /* Set the Automatic Gain Ceiling (AGC) to 128x, + drop VSYNC at frame drop, + limit exposure timing, + drop frame when the AEC step is larger than the exposure gap */ + {SENSOR, OV9650_COM9, 0x6e}, + /* Set VSYNC negative, Set RESET to SLHS (slave mode horizontal sync) + and set PWDN to SLVS (slave mode vertical sync) */ + {SENSOR, OV9650_COM10, 0x42}, + /* Set horizontal column start high to default value */ + {SENSOR, OV9650_HSTART, 0x1a}, + /* Set horizontal column end */ + {SENSOR, OV9650_HSTOP, 0xbf}, + /* Complementing register to the two writes above */ + {SENSOR, OV9650_HREF, 0xb2}, + /* Set vertical row start high bits */ + {SENSOR, OV9650_VSTRT, 0x02}, + /* Set vertical row end low bits */ + {SENSOR, OV9650_VSTOP, 0x7e}, + /* Set complementing vertical frame control */ + {SENSOR, OV9650_VREF, 0x10}, + /* Set raw RGB output format with VGA resolution */ + {SENSOR, OV9650_COM7, OV9650_VGA_SELECT | + OV9650_RGB_SELECT | + OV9650_RAW_RGB_SELECT}, + {SENSOR, OV9650_ADC, 0x04}, + {SENSOR, OV9650_HV, 0x40}, + /* Enable denoise, and white-pixel erase */ + {SENSOR, OV9650_COM22, 0x23}, + + /* Set the high bits of the exposure value */ + {SENSOR, OV9650_AECH, ((EXPOSURE_DEFAULT & 0xff00) >> 8)}, + + /* Set the low bits of the exposure value */ + {SENSOR, OV9650_COM1, (EXPOSURE_DEFAULT & 0xff)}, + {SENSOR, OV9650_GAIN, GAIN_DEFAULT}, + {SENSOR, OV9650_BLUE, BLUE_GAIN_DEFAULT}, + {SENSOR, OV9650_RED, RED_GAIN_DEFAULT}, + + {SENSOR, OV9650_COM3, OV9650_VARIOPIXEL}, + {SENSOR, OV9650_COM5, OV9650_SYSTEM_CLK_SEL}, + + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x82}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_L, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_PIX_OF_LINE_L, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x09}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe0}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x5e}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0xde} +}; + +static const unsigned char power_down_ov9650[][3] = +{ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {SENSOR, OV9650_COM7, 0x80}, + {SENSOR, OV9650_OFON, 0xf4}, + {SENSOR, OV9650_MVFP, 0x80}, + {SENSOR, OV9650_DBLV, 0x3f}, + {SENSOR, OV9650_RSVD36, 0x49}, + {SENSOR, OV9650_COM7, 0x05}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0} +}; + +/* Vertically and horizontally flips the image if matched, needed for machines + where the sensor is mounted upside down */ +static const struct dmi_system_id ov9650_flip_dmi_table[] = { + { + .ident = "ASUS A6VC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6VC") + } + }, + { + .ident = "ASUS A6VM", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6VM") + } + }, + { + .ident = "ASUS A6JC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6JC") + } + }, + { + .ident = "ASUS A6Kt", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6Kt") + } + }, + { } +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.c b/drivers/media/video/gspca/m5602/m5602_po1030.c new file mode 100644 index 00000000000..14a8f929dd1 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_po1030.c @@ -0,0 +1,334 @@ +/* + * Driver for the po1030 sensor + * + * Copyright (c) 2008 Erik Andren + * Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (c) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_po1030.h" + +int po1030_probe(struct sd *sd) +{ + u8 prod_id = 0, ver_id = 0, i; + + if (force_sensor) { + if (force_sensor == PO1030_SENSOR) { + info("Forcing a %s sensor", po1030.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a po1030 sensor"); + + /* Run the pre-init to actually probe the unit */ + for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) { + u8 data = preinit_po1030[i][2]; + if (preinit_po1030[i][0] == SENSOR) + po1030_write_sensor(sd, + preinit_po1030[i][1], &data, 1); + else + m5602_write_bridge(sd, preinit_po1030[i][1], data); + } + + if (po1030_read_sensor(sd, 0x3, &prod_id, 1)) + return -ENODEV; + + if (po1030_read_sensor(sd, 0x4, &ver_id, 1)) + return -ENODEV; + + if ((prod_id == 0x02) && (ver_id == 0xef)) { + info("Detected a po1030 sensor"); + goto sensor_found; + } + return -ENODEV; + +sensor_found: + sd->gspca_dev.cam.cam_mode = po1030.modes; + sd->gspca_dev.cam.nmodes = po1030.nmodes; + return 0; +} + +int po1030_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + + m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x10 + len); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x08); + + for (i = 0; i < len; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(DBG_TRACE, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } + return (err < 0) ? err : 0; +} + +int po1030_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* The po1030 only supports one byte writes */ + if (len > 1 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the footer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int po1030_init(struct sd *sd) +{ + int i, err = 0; + + /* Init the sensor */ + for (i = 0; i < ARRAY_SIZE(init_po1030); i++) { + u8 data[2] = {0x00, 0x00}; + + switch (init_po1030[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + init_po1030[i][1], + init_po1030[i][2]); + break; + + case SENSOR: + data[0] = init_po1030[i][2]; + err = po1030_write_sensor(sd, + init_po1030[i][1], data, 1); + break; + + case SENSOR_LONG: + data[0] = init_po1030[i][2]; + data[1] = init_po1030[i][3]; + err = po1030_write_sensor(sd, + init_po1030[i][1], data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + if (dump_sensor) + po1030_dump_registers(sd); + + return (err < 0) ? err : 0; +} + +int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_INTEGLINES_H, + &i2c_data, 1); + if (err < 0) + goto out; + *val = (i2c_data << 8); + + err = po1030_read_sensor(sd, PO1030_REG_INTEGLINES_M, + &i2c_data, 1); + *val |= i2c_data; + + PDEBUG(DBG_V4L2_CID, "Exposure read as %d", *val); +out: + return (err < 0) ? err : 0; +} + +int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + PDEBUG(DBG_V4L2, "Set exposure to %d", val & 0xffff); + + i2c_data = ((val & 0xff00) >> 8); + PDEBUG(DBG_V4L2, "Set exposure to high byte to 0x%x", + i2c_data); + + err = po1030_write_sensor(sd, PO1030_REG_INTEGLINES_H, + &i2c_data, 1); + if (err < 0) + goto out; + + i2c_data = (val & 0xff); + PDEBUG(DBG_V4L2, "Set exposure to low byte to 0x%x", + i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_INTEGLINES_M, + &i2c_data, 1); + +out: + return (err < 0) ? err : 0; +} + +int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_GLOBALGAIN, + &i2c_data, 1); + *val = i2c_data; + PDEBUG(DBG_V4L2_CID, "Read global gain %d", *val); + + return (err < 0) ? err : 0; +} + +int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + i2c_data = val & 0xff; + PDEBUG(DBG_V4L2, "Set global gain to %d", i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_GLOBALGAIN, + &i2c_data, 1); + return (err < 0) ? err : 0; +} + +int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_RED_GAIN, + &i2c_data, 1); + *val = i2c_data; + PDEBUG(DBG_V4L2_CID, "Read red gain %d", *val); + return (err < 0) ? err : 0; +} + +int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + i2c_data = val & 0xff; + PDEBUG(DBG_V4L2, "Set red gain to %d", i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_RED_GAIN, + &i2c_data, 1); + return (err < 0) ? err : 0; +} + +int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_BLUE_GAIN, + &i2c_data, 1); + *val = i2c_data; + PDEBUG(DBG_V4L2_CID, "Read blue gain %d", *val); + + return (err < 0) ? err : 0; +} + +int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + i2c_data = val & 0xff; + PDEBUG(DBG_V4L2, "Set blue gain to %d", i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_BLUE_GAIN, + &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int po1030_power_down(struct sd *sd) +{ + return 0; +} + +void po1030_dump_registers(struct sd *sd) +{ + int address; + u8 value = 0; + + info("Dumping the po1030 sensor core registers"); + for (address = 0; address < 0x7f; address++) { + po1030_read_sensor(sd, address, &value, 1); + info("register 0x%x contains 0x%x", + address, value); + } + + info("po1030 register state dump complete"); + + info("Probing for which registers that are read/write"); + for (address = 0; address < 0xff; address++) { + u8 old_value, ctrl_value; + u8 test_value[2] = {0xff, 0xff}; + + po1030_read_sensor(sd, address, &old_value, 1); + po1030_write_sensor(sd, address, test_value, 1); + po1030_read_sensor(sd, address, &ctrl_value, 1); + + if (ctrl_value == test_value[0]) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original value */ + po1030_write_sensor(sd, address, &old_value, 1); + } +} diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.h b/drivers/media/video/gspca/m5602/m5602_po1030.h new file mode 100644 index 00000000000..68f34c97bf4 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_po1030.h @@ -0,0 +1,478 @@ +/* + * Driver for the po1030 sensor. + * This is probably a pixel plus sensor but we haven't identified it yet + * + * Copyright (c) 2008 Erik Andren + * Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (c) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * Register defines taken from Pascal Stangs Proxycon Armlib + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_PO1030_H_ +#define M5602_PO1030_H_ + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define PO1030_REG_DEVID_H 0x00 +#define PO1030_REG_DEVID_L 0x01 +#define PO1030_REG_FRAMEWIDTH_H 0x04 +#define PO1030_REG_FRAMEWIDTH_L 0x05 +#define PO1030_REG_FRAMEHEIGHT_H 0x06 +#define PO1030_REG_FRAMEHEIGHT_L 0x07 +#define PO1030_REG_WINDOWX_H 0x08 +#define PO1030_REG_WINDOWX_L 0x09 +#define PO1030_REG_WINDOWY_H 0x0a +#define PO1030_REG_WINDOWY_L 0x0b +#define PO1030_REG_WINDOWWIDTH_H 0x0c +#define PO1030_REG_WINDOWWIDTH_L 0x0d +#define PO1030_REG_WINDOWHEIGHT_H 0x0e +#define PO1030_REG_WINDOWHEIGHT_L 0x0f + +#define PO1030_REG_GLOBALIBIAS 0x12 +#define PO1030_REG_PIXELIBIAS 0x13 + +#define PO1030_REG_GLOBALGAIN 0x15 +#define PO1030_REG_RED_GAIN 0x16 +#define PO1030_REG_GREEN_1_GAIN 0x17 +#define PO1030_REG_BLUE_GAIN 0x18 +#define PO1030_REG_GREEN_2_GAIN 0x19 + +#define PO1030_REG_INTEGLINES_H 0x1a +#define PO1030_REG_INTEGLINES_M 0x1b +#define PO1030_REG_INTEGLINES_L 0x1c + +#define PO1030_REG_CONTROL1 0x1d +#define PO1030_REG_CONTROL2 0x1e +#define PO1030_REG_CONTROL3 0x1f +#define PO1030_REG_CONTROL4 0x20 + +#define PO1030_REG_PERIOD50_H 0x23 +#define PO1030_REG_PERIOD50_L 0x24 +#define PO1030_REG_PERIOD60_H 0x25 +#define PO1030_REG_PERIOD60_L 0x26 +#define PO1030_REG_REGCLK167 0x27 +#define PO1030_REG_DELTA50 0x28 +#define PO1030_REG_DELTA60 0x29 + +#define PO1030_REG_ADCOFFSET 0x2c + +/* Gamma Correction Coeffs */ +#define PO1030_REG_GC0 0x2d +#define PO1030_REG_GC1 0x2e +#define PO1030_REG_GC2 0x2f +#define PO1030_REG_GC3 0x30 +#define PO1030_REG_GC4 0x31 +#define PO1030_REG_GC5 0x32 +#define PO1030_REG_GC6 0x33 +#define PO1030_REG_GC7 0x34 + +/* Color Transform Matrix */ +#define PO1030_REG_CT0 0x35 +#define PO1030_REG_CT1 0x36 +#define PO1030_REG_CT2 0x37 +#define PO1030_REG_CT3 0x38 +#define PO1030_REG_CT4 0x39 +#define PO1030_REG_CT5 0x3a +#define PO1030_REG_CT6 0x3b +#define PO1030_REG_CT7 0x3c +#define PO1030_REG_CT8 0x3d + +#define PO1030_REG_AUTOCTRL1 0x3e +#define PO1030_REG_AUTOCTRL2 0x3f + +#define PO1030_REG_YTARGET 0x40 +#define PO1030_REG_GLOBALGAINMIN 0x41 +#define PO1030_REG_GLOBALGAINMAX 0x42 + +/* Output format control */ +#define PO1030_REG_OUTFORMCTRL1 0x5a +#define PO1030_REG_OUTFORMCTRL2 0x5b +#define PO1030_REG_OUTFORMCTRL3 0x5c +#define PO1030_REG_OUTFORMCTRL4 0x5d +#define PO1030_REG_OUTFORMCTRL5 0x5e + +/* Imaging coefficients */ +#define PO1030_REG_YBRIGHT 0x73 +#define PO1030_REG_YCONTRAST 0x74 +#define PO1030_REG_YSATURATION 0x75 + +/*****************************************************************************/ + +#define PO1030_GLOBAL_GAIN_DEFAULT 0x12 +#define PO1030_EXPOSURE_DEFAULT 0xf0ff +#define PO1030_BLUE_GAIN_DEFAULT 0x40 +#define PO1030_RED_GAIN_DEFAULT 0x40 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; +extern unsigned int m5602_debug; + +int po1030_probe(struct sd *sd); +int po1030_init(struct sd *sd); +int po1030_power_down(struct sd *sd); + +void po1030_dump_registers(struct sd *sd); + +int po1030_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int po1030_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor po1030 = { + .name = "PO1030", + + .i2c_slave_id = 0xdc, + + .probe = po1030_probe, + .init = po1030_init, + .power_down = po1030_power_down, + + .nctrls = 4, + .ctrls = { + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = PO1030_GLOBAL_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_gain, + .get = po1030_get_gain + }, { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0xffff, + .step = 0x1, + .default_value = PO1030_EXPOSURE_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_exposure, + .get = po1030_get_exposure + }, { + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = PO1030_RED_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_red_balance, + .get = po1030_get_red_balance + }, { + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = PO1030_BLUE_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_blue_balance, + .get = po1030_get_blue_balance + } + }, + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_po1030[][3] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xec}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00} +}; + +static const unsigned char init_po1030[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + /*sequence 1*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d}, + + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + /*end of sequence 1*/ + + /*sequence 2 (same as stop sequence)*/ + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + /*end of sequence 2*/ + + /*sequence 5*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xec}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + /*end of sequence 5*/ + + /*sequence 2 stop */ + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + /*end of sequence 2 stop */ + +/* --------------------------------- + * end of init - begin of start + * --------------------------------- */ + + /*sequence 3*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + /*end of sequence 3*/ + /*sequence 4*/ + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00}, + + {SENSOR, PO1030_REG_AUTOCTRL2, 0x04}, + + /* Set the width to 751 */ + {SENSOR, PO1030_REG_FRAMEWIDTH_H, 0x02}, + {SENSOR, PO1030_REG_FRAMEWIDTH_L, 0xef}, + + /* Set the height to 540 */ + {SENSOR, PO1030_REG_FRAMEHEIGHT_H, 0x02}, + {SENSOR, PO1030_REG_FRAMEHEIGHT_L, 0x1c}, + + /* Set the x window to 1 */ + {SENSOR, PO1030_REG_WINDOWX_H, 0x00}, + {SENSOR, PO1030_REG_WINDOWX_L, 0x01}, + + /* Set the y window to 1 */ + {SENSOR, PO1030_REG_WINDOWY_H, 0x00}, + {SENSOR, PO1030_REG_WINDOWX_L, 0x01}, + + {SENSOR, PO1030_REG_WINDOWWIDTH_H, 0x02}, + {SENSOR, PO1030_REG_WINDOWWIDTH_L, 0x87}, + {SENSOR, PO1030_REG_WINDOWHEIGHT_H, 0x01}, + {SENSOR, PO1030_REG_WINDOWHEIGHT_L, 0xe3}, + + {SENSOR, PO1030_REG_OUTFORMCTRL2, 0x04}, + {SENSOR, PO1030_REG_OUTFORMCTRL2, 0x04}, + {SENSOR, PO1030_REG_AUTOCTRL1, 0x08}, + {SENSOR, PO1030_REG_CONTROL2, 0x03}, + {SENSOR, 0x21, 0x90}, + {SENSOR, PO1030_REG_YTARGET, 0x60}, + {SENSOR, 0x59, 0x13}, + {SENSOR, PO1030_REG_OUTFORMCTRL1, 0x40}, + {SENSOR, 0x5f, 0x00}, + {SENSOR, 0x60, 0x80}, + {SENSOR, 0x78, 0x14}, + {SENSOR, 0x6f, 0x01}, + {SENSOR, PO1030_REG_CONTROL1, 0x18}, + {SENSOR, PO1030_REG_GLOBALGAINMAX, 0x14}, + {SENSOR, 0x63, 0x38}, + {SENSOR, 0x64, 0x38}, + {SENSOR, PO1030_REG_CONTROL1, 0x58}, + {SENSOR, PO1030_REG_RED_GAIN, 0x30}, + {SENSOR, PO1030_REG_GREEN_1_GAIN, 0x30}, + {SENSOR, PO1030_REG_BLUE_GAIN, 0x30}, + {SENSOR, PO1030_REG_GREEN_2_GAIN, 0x30}, + {SENSOR, PO1030_REG_GC0, 0x10}, + {SENSOR, PO1030_REG_GC1, 0x20}, + {SENSOR, PO1030_REG_GC2, 0x40}, + {SENSOR, PO1030_REG_GC3, 0x60}, + {SENSOR, PO1030_REG_GC4, 0x80}, + {SENSOR, PO1030_REG_GC5, 0xa0}, + {SENSOR, PO1030_REG_GC6, 0xc0}, + {SENSOR, PO1030_REG_GC7, 0xff}, + /*end of sequence 4*/ + /*sequence 5*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xec}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7e}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + /*end of sequence 5*/ + + /*sequence 6*/ + /* Changing 40 in f0 the image becomes green in bayer mode and red in + * rgb mode */ + {SENSOR, PO1030_REG_RED_GAIN, PO1030_RED_GAIN_DEFAULT}, + /* in changing 40 in f0 the image becomes green in bayer mode and red in + * rgb mode */ + {SENSOR, PO1030_REG_BLUE_GAIN, PO1030_BLUE_GAIN_DEFAULT}, + + /* with a very low lighted environment increase the exposure but + * decrease the FPS (Frame Per Second) */ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + + /* Controls high exposure more than SENSOR_LOW_EXPOSURE, use only in + * low lighted environment (f0 is more than ff ?)*/ + {SENSOR, PO1030_REG_INTEGLINES_H, ((PO1030_EXPOSURE_DEFAULT >> 2) + & 0xff)}, + + /* Controls middle exposure, use only in high lighted environment */ + {SENSOR, PO1030_REG_INTEGLINES_M, PO1030_EXPOSURE_DEFAULT & 0xff}, + + /* Controls clarity (not sure) */ + {SENSOR, PO1030_REG_INTEGLINES_L, 0x00}, + /* Controls gain (the image is more lighted) */ + {SENSOR, PO1030_REG_GLOBALGAIN, PO1030_GLOBAL_GAIN_DEFAULT}, + + /* Sets the width */ + {SENSOR, PO1030_REG_FRAMEWIDTH_H, 0x02}, + {SENSOR, PO1030_REG_FRAMEWIDTH_L, 0xef} + /*end of sequence 6*/ +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c new file mode 100644 index 00000000000..3a2ae7a2e26 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -0,0 +1,460 @@ +/* + * Driver for the s5k4aa sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_s5k4aa.h" + +int s5k4aa_probe(struct sd *sd) +{ + u8 prod_id[6] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; + const u8 expected_prod_id[6] = {0x00, 0x10, 0x00, 0x4b, 0x33, 0x75}; + int i, err = 0; + + if (force_sensor) { + if (force_sensor == S5K4AA_SENSOR) { + info("Forcing a %s sensor", s5k4aa.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a s5k4aa sensor"); + + /* Preinit the sensor */ + for (i = 0; i < ARRAY_SIZE(preinit_s5k4aa) && !err; i++) { + u8 data[2] = {0x00, 0x00}; + + switch (preinit_s5k4aa[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + preinit_s5k4aa[i][1], + preinit_s5k4aa[i][2]); + break; + + case SENSOR: + data[0] = preinit_s5k4aa[i][2]; + err = s5k4aa_write_sensor(sd, + preinit_s5k4aa[i][1], + data, 1); + break; + + case SENSOR_LONG: + data[0] = preinit_s5k4aa[i][2]; + data[1] = preinit_s5k4aa[i][3]; + err = s5k4aa_write_sensor(sd, + preinit_s5k4aa[i][1], + data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + /* Test some registers, but we don't know their exact meaning yet */ + if (s5k4aa_read_sensor(sd, 0x00, prod_id, sizeof(prod_id))) + return -ENODEV; + + if (memcmp(prod_id, expected_prod_id, sizeof(prod_id))) + return -ENODEV; + else + info("Detected a s5k4aa sensor"); +sensor_found: + sd->gspca_dev.cam.cam_mode = s5k4aa.modes; + sd->gspca_dev.cam.nmodes = s5k4aa.nmodes; + return 0; +} + +int s5k4aa_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x18 + len); + if (err < 0) + goto out; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + for (i = 0; (i < len) & !err; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(DBG_TRACE, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* No sensor with a data width larger than 16 bits has yet been seen */ + if (len > 2 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + /* Special case larger sensor writes */ + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int s5k4aa_init(struct sd *sd) +{ + int i, err = 0; + + for (i = 0; i < ARRAY_SIZE(init_s5k4aa) && !err; i++) { + u8 data[2] = {0x00, 0x00}; + + switch (init_s5k4aa[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + init_s5k4aa[i][1], + init_s5k4aa[i][2]); + break; + + case SENSOR: + data[0] = init_s5k4aa[i][2]; + err = s5k4aa_write_sensor(sd, + init_s5k4aa[i][1], data, 1); + break; + + case SENSOR_LONG: + data[0] = init_s5k4aa[i][2]; + data[1] = init_s5k4aa[i][3]; + err = s5k4aa_write_sensor(sd, + init_s5k4aa[i][1], data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + if (dump_sensor) + s5k4aa_dump_registers(sd); + + if (!err && dmi_check_system(s5k4aa_vflip_dmi_table)) { + u8 data = 0x02; + info("vertical flip quirk active"); + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + s5k4aa_read_sensor(sd, S5K4AA_READ_MODE, &data, 1); + data |= S5K4AA_RM_V_FLIP; + data &= ~S5K4AA_RM_H_FLIP; + s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + + /* Decrement COLSTART to preserve color order (BGGR) */ + s5k4aa_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + data--; + s5k4aa_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + + /* Increment ROWSTART to preserve color order (BGGR) */ + s5k4aa_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + data++; + s5k4aa_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + } + + return (err < 0) ? err : 0; +} + +int s5k4aa_power_down(struct sd *sd) +{ + return 0; +} + +int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_EXPOSURE_HI, &data, 1); + if (err < 0) + goto out; + + *val = data << 8; + err = s5k4aa_read_sensor(sd, S5K4AA_EXPOSURE_LO, &data, 1); + *val |= data; + PDEBUG(DBG_V4L2_CID, "Read exposure %d", *val); +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(DBG_V4L2_CID, "Set exposure to %d", val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + data = (val >> 8) & 0xff; + err = s5k4aa_write_sensor(sd, S5K4AA_EXPOSURE_HI, &data, 1); + if (err < 0) + goto out; + data = val & 0xff; + err = s5k4aa_write_sensor(sd, S5K4AA_EXPOSURE_LO, &data, 1); +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + *val = (data & S5K4AA_RM_V_FLIP) >> 7; + PDEBUG(DBG_V4L2_CID, "Read vertical flip %d", *val); + +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(DBG_V4L2_CID, "Set vertical flip to %d", val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + data = ((data & ~S5K4AA_RM_V_FLIP) + | ((val & 0x01) << 7)); + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + + if (val) { + err = s5k4aa_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + if (err < 0) + goto out; + + data++; + err = s5k4aa_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + } else { + err = s5k4aa_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + if (err < 0) + goto out; + + data--; + err = s5k4aa_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + } +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + *val = (data & S5K4AA_RM_H_FLIP) >> 6; + PDEBUG(DBG_V4L2_CID, "Read horizontal flip %d", *val); +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(DBG_V4L2_CID, "Set horizontal flip to %d", + val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + + data = ((data & ~S5K4AA_RM_H_FLIP) | ((val & 0x01) << 6)); + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + + if (val) { + err = s5k4aa_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + if (err < 0) + goto out; + data++; + err = s5k4aa_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + if (err < 0) + goto out; + } else { + err = s5k4aa_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + if (err < 0) + goto out; + data--; + err = s5k4aa_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + } +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_GAIN_2, &data, 1); + *val = data; + PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); + +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(DBG_V4L2_CID, "Set gain to %d", val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + data = val & 0xff; + err = s5k4aa_write_sensor(sd, S5K4AA_GAIN_2, &data, 1); + +out: + return (err < 0) ? err : 0; +} + +void s5k4aa_dump_registers(struct sd *sd) +{ + int address; + u8 page, old_page; + s5k4aa_read_sensor(sd, S5K4AA_PAGE_MAP, &old_page, 1); + for (page = 0; page < 16; page++) { + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &page, 1); + info("Dumping the s5k4aa register state for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 value = 0; + s5k4aa_read_sensor(sd, address, &value, 1); + info("register 0x%x contains 0x%x", + address, value); + } + } + info("s5k4aa register state dump complete"); + + for (page = 0; page < 16; page++) { + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &page, 1); + info("Probing for which registers that are " + "read/write for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 old_value, ctrl_value, test_value = 0xff; + + s5k4aa_read_sensor(sd, address, &old_value, 1); + s5k4aa_write_sensor(sd, address, &test_value, 1); + s5k4aa_read_sensor(sd, address, &ctrl_value, 1); + + if (ctrl_value == test_value) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original value */ + s5k4aa_write_sensor(sd, address, &old_value, 1); + } + } + info("Read/write register probing complete"); + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &old_page, 1); +} diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h new file mode 100644 index 00000000000..1e4213a7321 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h @@ -0,0 +1,368 @@ +/* + * Driver for the s5k4aa sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_S5K4AA_H_ +#define M5602_S5K4AA_H_ + +#include + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define S5K4AA_PAGE_MAP 0xec + +#define S5K4AA_PAGE_MAP_0 0x00 +#define S5K4AA_PAGE_MAP_1 0x01 +#define S5K4AA_PAGE_MAP_2 0x02 + +/* Sensor register definitions for page 0x02 */ +#define S5K4AA_READ_MODE 0x03 +#define S5K4AA_ROWSTART_HI 0x04 +#define S5K4AA_ROWSTART_LO 0x05 +#define S5K4AA_COLSTART_HI 0x06 +#define S5K4AA_COLSTART_LO 0x07 +#define S5K4AA_WINDOW_HEIGHT_HI 0x08 +#define S5K4AA_WINDOW_HEIGHT_LO 0x09 +#define S5K4AA_WINDOW_WIDTH_HI 0x0a +#define S5K4AA_WINDOW_WIDTH_LO 0x0b +#define S5K4AA_GLOBAL_GAIN__ 0x0f /* Only a guess ATM !!! */ +#define S5K4AA_H_BLANK_HI__ 0x1d /* Only a guess ATM !!! sync lost + if too low, reduces frame rate + if too high */ +#define S5K4AA_H_BLANK_LO__ 0x1e /* Only a guess ATM !!! */ +#define S5K4AA_EXPOSURE_HI 0x17 +#define S5K4AA_EXPOSURE_LO 0x18 +#define S5K4AA_GAIN_1 0x1f /* (digital?) gain : 5 bits */ +#define S5K4AA_GAIN_2 0x20 /* (analogue?) gain : 7 bits */ + +#define S5K4AA_RM_ROW_SKIP_4X 0x08 +#define S5K4AA_RM_ROW_SKIP_2X 0x04 +#define S5K4AA_RM_COL_SKIP_4X 0x02 +#define S5K4AA_RM_COL_SKIP_2X 0x01 +#define S5K4AA_RM_H_FLIP 0x40 +#define S5K4AA_RM_V_FLIP 0x80 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; +extern unsigned int m5602_debug; + +int s5k4aa_probe(struct sd *sd); +int s5k4aa_init(struct sd *sd); +int s5k4aa_power_down(struct sd *sd); + +void s5k4aa_dump_registers(struct sd *sd); + +int s5k4aa_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int s5k4aa_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +int s5k4aa_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +int s5k4aa_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +int s5k4aa_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_gain(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor s5k4aa = { + .name = "S5K4AA", + .probe = s5k4aa_probe, + .init = s5k4aa_init, + .power_down = s5k4aa_power_down, + .read_sensor = s5k4aa_read_sensor, + .write_sensor = s5k4aa_write_sensor, + .i2c_slave_id = 0x5a, + .nctrls = 4, + .ctrls = { + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = s5k4aa_set_vflip, + .get = s5k4aa_get_vflip + + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = s5k4aa_set_hflip, + .get = s5k4aa_get_hflip + + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 127, + .step = 1, + .default_value = 0xa0, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k4aa_set_gain, + .get = s5k4aa_get_gain + }, { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 13, + .maximum = 0xfff, + .step = 1, + .default_value = 0x100, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k4aa_set_exposure, + .get = s5k4aa_get_exposure + } + }, + + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_s5k4aa[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08, 0x00}, + + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x14, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K4AA_PAGE_MAP, 0x00, 0x00} +}; + +static const unsigned char init_s5k4aa[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08, 0x00}, + + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x14, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K4AA_PAGE_MAP, 0x07, 0x00}, + {SENSOR, 0x36, 0x01, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x00, 0x00}, + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, 0x0c, 0x05, 0x00}, + {SENSOR, 0x02, 0x0e, 0x00}, + {SENSOR, S5K4AA_GAIN_1, 0x0f, 0x00}, + {SENSOR, S5K4AA_GAIN_2, 0x00, 0x00}, + {SENSOR, S5K4AA_GLOBAL_GAIN__, 0x01, 0x00}, + {SENSOR, 0x11, 0x00, 0x00}, + {SENSOR, 0x12, 0x00, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, S5K4AA_READ_MODE, 0xa0, 0x00}, + {SENSOR, 0x37, 0x00, 0x00}, + {SENSOR, S5K4AA_ROWSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_ROWSTART_LO, 0x2a, 0x00}, + {SENSOR, S5K4AA_COLSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_COLSTART_LO, 0x0b, 0x00}, + {SENSOR, S5K4AA_WINDOW_HEIGHT_HI, 0x03, 0x00}, + {SENSOR, S5K4AA_WINDOW_HEIGHT_LO, 0xc4, 0x00}, + {SENSOR, S5K4AA_WINDOW_WIDTH_HI, 0x05, 0x00}, + {SENSOR, S5K4AA_WINDOW_WIDTH_LO, 0x08, 0x00}, + {SENSOR, S5K4AA_H_BLANK_HI__, 0x00, 0x00}, + {SENSOR, S5K4AA_H_BLANK_LO__, 0x48, 0x00}, + {SENSOR, S5K4AA_EXPOSURE_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_EXPOSURE_LO, 0x43, 0x00}, + {SENSOR, 0x11, 0x04, 0x00}, + {SENSOR, 0x12, 0xc3, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + /* VSYNC_PARA, VSYNC_PARA : img height 480 = 0x01e0 */ + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe0, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + /* HSYNC_PARA, HSYNC_PARA : img width 640 = 0x0280 */ + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x80, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, /* 48 MHz */ + + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, S5K4AA_READ_MODE, S5K4AA_RM_H_FLIP | S5K4AA_RM_ROW_SKIP_2X + | S5K4AA_RM_COL_SKIP_2X, 0x00}, + /* 0x37 : Fix image stability when light is too bright and improves + * image quality in 640x480, but worsens it in 1280x1024 */ + {SENSOR, 0x37, 0x01, 0x00}, + /* ROWSTART_HI, ROWSTART_LO : 10 + (1024-960)/2 = 42 = 0x002a */ + {SENSOR, S5K4AA_ROWSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_ROWSTART_LO, 0x2a, 0x00}, + {SENSOR, S5K4AA_COLSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_COLSTART_LO, 0x0c, 0x00}, + /* window_height_hi, window_height_lo : 960 = 0x03c0 */ + {SENSOR, S5K4AA_WINDOW_HEIGHT_HI, 0x03, 0x00}, + {SENSOR, S5K4AA_WINDOW_HEIGHT_LO, 0xc0, 0x00}, + /* window_width_hi, window_width_lo : 1280 = 0x0500 */ + {SENSOR, S5K4AA_WINDOW_WIDTH_HI, 0x05, 0x00}, + {SENSOR, S5K4AA_WINDOW_WIDTH_LO, 0x00, 0x00}, + {SENSOR, S5K4AA_H_BLANK_HI__, 0x00, 0x00}, + {SENSOR, S5K4AA_H_BLANK_LO__, 0xa8, 0x00}, /* helps to sync... */ + {SENSOR, S5K4AA_EXPOSURE_HI, 0x01, 0x00}, + {SENSOR, S5K4AA_EXPOSURE_LO, 0x00, 0x00}, + {SENSOR, 0x11, 0x04, 0x00}, + {SENSOR, 0x12, 0xc3, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, 0x02, 0x0e, 0x00}, + {SENSOR_LONG, S5K4AA_GLOBAL_GAIN__, 0x0f, 0x00}, + {SENSOR, S5K4AA_GAIN_1, 0x0b, 0x00}, + {SENSOR, S5K4AA_GAIN_2, 0xa0, 0x00} +}; + +static const struct dmi_system_id s5k4aa_vflip_dmi_table[] = { + { + .ident = "Fujitsu-Siemens Amilo Xa 2528", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528") + } + }, + { + .ident = "Fujitsu-Siemens Amilo Xi 2550", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2550") + } + }, + { + .ident = "MSI GX700", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), + DMI_MATCH(DMI_PRODUCT_NAME, "GX700"), + DMI_MATCH(DMI_BIOS_DATE, "07/26/2007") + } + }, + { } +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c new file mode 100644 index 00000000000..a4d6a816312 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c @@ -0,0 +1,331 @@ +/* + * Driver for the s5k83a sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_s5k83a.h" + +int s5k83a_probe(struct sd *sd) +{ + u8 prod_id = 0, ver_id = 0; + int i, err = 0; + + if (force_sensor) { + if (force_sensor == S5K83A_SENSOR) { + info("Forcing a %s sensor", s5k83a.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a s5k83a sensor"); + + /* Preinit the sensor */ + for (i = 0; i < ARRAY_SIZE(preinit_s5k83a) && !err; i++) { + u8 data[2] = {preinit_s5k83a[i][2], preinit_s5k83a[i][3]}; + if (preinit_s5k83a[i][0] == SENSOR) + err = s5k83a_write_sensor(sd, preinit_s5k83a[i][1], + data, 2); + else + err = m5602_write_bridge(sd, preinit_s5k83a[i][1], + data[0]); + } + + /* We don't know what register (if any) that contain the product id + * Just pick the first addresses that seem to produce the same results + * on multiple machines */ + if (s5k83a_read_sensor(sd, 0x00, &prod_id, 1)) + return -ENODEV; + + if (s5k83a_read_sensor(sd, 0x01, &ver_id, 1)) + return -ENODEV; + + if ((prod_id == 0xff) || (ver_id == 0xff)) + return -ENODEV; + else + info("Detected a s5k83a sensor"); + +sensor_found: + sd->gspca_dev.cam.cam_mode = s5k83a.modes; + sd->gspca_dev.cam.nmodes = s5k83a.nmodes; + return 0; +} + +int s5k83a_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x18 + len); + if (err < 0) + goto out; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + + if (err < 0) + goto out; + for (i = 0; i < len && !len; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(DBG_TRACE, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } + +out: + return (err < 0) ? err : 0; +} + +int s5k83a_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* No sensor with a data width larger than 16 bits has yet been seen */ + if (len > 2 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + /* Special case larger sensor writes */ + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int s5k83a_init(struct sd *sd) +{ + int i, err = 0; + + for (i = 0; i < ARRAY_SIZE(init_s5k83a) && !err; i++) { + u8 data[2] = {0x00, 0x00}; + + switch (init_s5k83a[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + init_s5k83a[i][1], + init_s5k83a[i][2]); + break; + + case SENSOR: + data[0] = init_s5k83a[i][2]; + err = s5k83a_write_sensor(sd, + init_s5k83a[i][1], data, 1); + break; + + case SENSOR_LONG: + data[0] = init_s5k83a[i][2]; + data[1] = init_s5k83a[i][3]; + err = s5k83a_write_sensor(sd, + init_s5k83a[i][1], data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + if (dump_sensor) + s5k83a_dump_registers(sd); + + return (err < 0) ? err : 0; +} + +int s5k83a_power_down(struct sd *sd) +{ + return 0; +} + +void s5k83a_dump_registers(struct sd *sd) +{ + int address; + u8 page, old_page; + s5k83a_read_sensor(sd, S5K83A_PAGE_MAP, &old_page, 1); + + for (page = 0; page < 16; page++) { + s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1); + info("Dumping the s5k83a register state for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 val = 0; + s5k83a_read_sensor(sd, address, &val, 1); + info("register 0x%x contains 0x%x", + address, val); + } + } + info("s5k83a register state dump complete"); + + for (page = 0; page < 16; page++) { + s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1); + info("Probing for which registers that are read/write " + "for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 old_val, ctrl_val, test_val = 0xff; + + s5k83a_read_sensor(sd, address, &old_val, 1); + s5k83a_write_sensor(sd, address, &test_val, 1); + s5k83a_read_sensor(sd, address, &ctrl_val, 1); + + if (ctrl_val == test_val) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original val */ + s5k83a_write_sensor(sd, address, &old_val, 1); + } + } + info("Read/write register probing complete"); + s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, &old_page, 1); +} + +int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + err = s5k83a_read_sensor(sd, S5K83A_BRIGHTNESS, data, 2); + data[1] = data[1] << 1; + *val = data[1]; + + return (err < 0) ? err : 0; +} + +int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0x00; + data[1] = 0x20; + err = s5k83a_write_sensor(sd, 0x14, data, 2); + if (err < 0) + return err; + + data[0] = 0x01; + data[1] = 0x00; + err = s5k83a_write_sensor(sd, 0x0d, data, 2); + if (err < 0) + return err; + + /* FIXME: This is not sane, we need to figure out the composition + of these registers */ + data[0] = val >> 3; /* brightness, high 5 bits */ + data[1] = val >> 1; /* brightness, high 7 bits */ + err = s5k83a_write_sensor(sd, S5K83A_BRIGHTNESS, data, 2); + + return (err < 0) ? err : 0; +} + +int s5k83a_get_whiteness(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data; + struct sd *sd = (struct sd *) gspca_dev; + + err = s5k83a_read_sensor(sd, S5K83A_WHITENESS, &data, 1); + + *val = data; + return (err < 0) ? err : 0; +} + +int s5k83a_set_whiteness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[1]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = val; + err = s5k83a_write_sensor(sd, S5K83A_WHITENESS, data, 1); + + return (err < 0) ? err : 0; +} + +int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + err = s5k83a_read_sensor(sd, S5K83A_GAIN, data, 2); + + data[1] = data[1] & 0x3f; + if (data[1] > S5K83A_MAXIMUM_GAIN) + data[1] = S5K83A_MAXIMUM_GAIN; + + *val = data[1]; + + return (err < 0) ? err : 0; +} + +int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err = 0; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0; + data[1] = val; + err = s5k83a_write_sensor(sd, S5K83A_GAIN, data, 2); + + return (err < 0) ? err : 0; +} diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.h b/drivers/media/video/gspca/m5602/m5602_s5k83a.h new file mode 100644 index 00000000000..a57f623d80c --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.h @@ -0,0 +1,444 @@ +/* + * Driver for the s5k83a sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_S5K83A_H_ +#define M5602_S5K83A_H_ + +#include "m5602_sensor.h" + +#define S5K83A_PAGE_MAP 0xec +#define S5K83A_GAIN 0x18 +#define S5K83A_WHITENESS 0x0a +#define S5K83A_BRIGHTNESS 0x1b + +#define S5K83A_DEFAULT_BRIGHTNESS 0x71 +#define S5K83A_DEFAULT_WHITENESS 0x7e +#define S5K83A_DEFAULT_GAIN 0x00 +#define S5K83A_MAXIMUM_GAIN 0x3c + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; +extern unsigned int m5602_debug; + + +int s5k83a_probe(struct sd *sd); +int s5k83a_init(struct sd *sd); +int s5k83a_power_down(struct sd *sd); + +void s5k83a_dump_registers(struct sd *sd); + +int s5k83a_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int s5k83a_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val); +int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_set_whiteness(struct gspca_dev *gspca_dev, __s32 val); +int s5k83a_get_whiteness(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val); +int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val); + +static struct m5602_sensor s5k83a = { + .name = "S5K83A", + .probe = s5k83a_probe, + .init = s5k83a_init, + .power_down = s5k83a_power_down, + .read_sensor = s5k83a_read_sensor, + .write_sensor = s5k83a_write_sensor, + .i2c_slave_id = 0x5a, + .nctrls = 3, + .ctrls = { + { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "brightness", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = S5K83A_DEFAULT_BRIGHTNESS, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k83a_set_brightness, + .get = s5k83a_get_brightness + + }, { + { + .id = V4L2_CID_WHITENESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "whiteness", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = S5K83A_DEFAULT_WHITENESS, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k83a_set_whiteness, + .get = s5k83a_get_whiteness, + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0x00, + .maximum = S5K83A_MAXIMUM_GAIN, + .step = 0x01, + .default_value = S5K83A_DEFAULT_GAIN, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k83a_set_gain, + .get = s5k83a_get_gain + } + }, + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + + } + } +}; + +static const unsigned char preinit_s5k83a[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00} +}; + +/* This could probably be considerably shortened. + I don't have the hardware to experiment with it, patches welcome +*/ +static const unsigned char init_s5k83a[][4] = +{ + {SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00}, + {SENSOR, 0xaf, 0x01, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00}, + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x01, 0x50, 0x00}, + {SENSOR, 0x12, 0x20, 0x00}, + {SENSOR, 0x17, 0x40, 0x00}, + {SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00}, + {SENSOR, 0x1c, 0x00, 0x00}, + {SENSOR, 0x02, 0x70, 0x00}, + {SENSOR, 0x03, 0x0b, 0x00}, + {SENSOR, 0x04, 0xf0, 0x00}, + {SENSOR, 0x05, 0x0b, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x06, 0x71, 0x00}, + {SENSOR, 0x07, 0xe8, 0x00}, + {SENSOR, 0x08, 0x02, 0x00}, + {SENSOR, 0x09, 0x88, 0x00}, + {SENSOR, 0x14, 0x00, 0x00}, + {SENSOR, 0x15, 0x20, 0x00}, + {SENSOR, 0x19, 0x00, 0x00}, + {SENSOR, 0x1a, 0x98, 0x00}, + {SENSOR, 0x0f, 0x02, 0x00}, + {SENSOR, 0x10, 0xe5, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x00, 0x7d}, + {SENSOR_LONG, 0x1b, 0x0d, 0x05}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00}, + + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00}, + {SENSOR, 0xaf, 0x01, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + /* ff ( init value )is very dark) || 71 and f0 better */ + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x01, 0x50, 0x00}, + {SENSOR, 0x12, 0x20, 0x00}, + {SENSOR, 0x17, 0x40, 0x00}, + {SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00}, + {SENSOR, 0x1c, 0x00, 0x00}, + {SENSOR, 0x02, 0x70, 0x00}, + /* some values like 0x10 give a blue-purple image */ + {SENSOR, 0x03, 0x0b, 0x00}, + {SENSOR, 0x04, 0xf0, 0x00}, + {SENSOR, 0x05, 0x0b, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + /* under 80 don't work, highter depend on value */ + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, + + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x06, 0x71, 0x00}, + {SENSOR, 0x07, 0xe8, 0x00}, + {SENSOR, 0x08, 0x02, 0x00}, + {SENSOR, 0x09, 0x88, 0x00}, + {SENSOR, 0x14, 0x00, 0x00}, + {SENSOR, 0x15, 0x20, 0x00}, + {SENSOR, 0x19, 0x00, 0x00}, + {SENSOR, 0x1a, 0x98, 0x00}, + {SENSOR, 0x0f, 0x02, 0x00}, + {SENSOR, 0x10, 0xe5, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x00, 0x7d}, + {SENSOR_LONG, 0x1b, 0x0d, 0x05}, + + /* The following sequence is useless after a clean boot + but is necessary after resume from suspend */ + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00}, + {SENSOR, 0xaf, 0x01, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00}, + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x01, 0x50, 0x00}, + {SENSOR, 0x12, 0x20, 0x00}, + {SENSOR, 0x17, 0x40, 0x00}, + {SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00}, + {SENSOR, 0x1c, 0x00, 0x00}, + {SENSOR, 0x02, 0x70, 0x00}, + {SENSOR, 0x03, 0x0b, 0x00}, + {SENSOR, 0x04, 0xf0, 0x00}, + {SENSOR, 0x05, 0x0b, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x06, 0x71, 0x00}, + {SENSOR, 0x07, 0xe8, 0x00}, + {SENSOR, 0x08, 0x02, 0x00}, + {SENSOR, 0x09, 0x88, 0x00}, + {SENSOR, 0x14, 0x00, 0x00}, + {SENSOR, 0x15, 0x20, 0x00}, + {SENSOR, 0x19, 0x00, 0x00}, + {SENSOR, 0x1a, 0x98, 0x00}, + {SENSOR, 0x0f, 0x02, 0x00}, + + {SENSOR, 0x10, 0xe5, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x00, 0x7d}, + {SENSOR_LONG, 0x1b, 0x0d, 0x05}, + + /* normal colors + (this is value after boot, but after tries can be different) */ + {SENSOR, 0x00, 0x06, 0x00}, + + /* set default brightness */ + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x01, 0x00}, + {SENSOR_LONG, 0x1b, S5K83A_DEFAULT_BRIGHTNESS >> 3, + S5K83A_DEFAULT_BRIGHTNESS >> 1}, + + /* set default whiteness */ + {SENSOR, S5K83A_WHITENESS, S5K83A_DEFAULT_WHITENESS, 0x00}, + + /* set default gain */ + {SENSOR_LONG, 0x18, 0x00, S5K83A_DEFAULT_GAIN} +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_sensor.h b/drivers/media/video/gspca/m5602/m5602_sensor.h new file mode 100644 index 00000000000..930fcaab441 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_sensor.h @@ -0,0 +1,76 @@ +/* + * USB Driver for ALi m5602 based webcams + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_SENSOR_H_ +#define M5602_SENSOR_H_ + +#include "m5602_bridge.h" + +#define M5602_DEFAULT_FRAME_WIDTH 640 +#define M5602_DEFAULT_FRAME_HEIGHT 480 + +#define M5602_MAX_CTRLS (V4L2_CID_LASTP1 - V4L2_CID_BASE + 10) + +/* Enumerates all supported sensors */ +enum sensors { + OV9650_SENSOR = 1, + S5K83A_SENSOR = 2, + S5K4AA_SENSOR = 3, + MT9M111_SENSOR = 4, + PO1030_SENSOR = 5 +}; + +/* Enumerates all possible instruction types */ +enum instruction { + BRIDGE, + SENSOR, + SENSOR_LONG +}; + +struct m5602_sensor { + /* Defines the name of a sensor */ + char name[32]; + + /* What i2c address the sensor is connected to */ + u8 i2c_slave_id; + + /* Probes if the sensor is connected */ + int (*probe)(struct sd *sd); + + /* Performs a initialization sequence */ + int (*init)(struct sd *sd); + + /* Performs a power down sequence */ + int (*power_down)(struct sd *sd); + + /* Reads a sensor register */ + int (*read_sensor)(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + + /* Writes to a sensor register */ + int (*write_sensor)(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + + int nctrls; + struct ctrl ctrls[M5602_MAX_CTRLS]; + + char nmodes; + struct v4l2_pix_format modes[]; +}; + +#endif -- cgit v1.2.3-70-g09d2 From 028165a336ab7d097d23e2af936dea373e3d3afc Mon Sep 17 00:00:00 2001 From: Hermann Pitton Date: Sat, 4 Oct 2008 21:37:36 -0300 Subject: V4L/DVB (9113): saa7134: fixes for the Asus Tiger Revision 1.00 In opposite to the P7131 Dual this early OEM card has a male radio antenna connector and also no remote. We currently switch the DVB-T RF feed to the radio input, like on the P7131 with female radio connector used also for DVB-T and should improve this. Signed-off-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 3 +- drivers/media/video/saa7134/saa7134-cards.c | 45 +++++++++++++++++++++++++---- drivers/media/video/saa7134/saa7134-dvb.c | 5 ++++ drivers/media/video/saa7134/saa7134.h | 1 + 4 files changed, 48 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 727b5f21477..dc67eef38ff 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -76,7 +76,7 @@ 75 -> AVerMedia AVerTVHD MCE A180 [1461:1044] 76 -> SKNet MonsterTV Mobile [1131:4ee9] 77 -> Pinnacle PCTV 40i/50i/110i (saa7133) [11bd:002e] - 78 -> ASUSTeK P7131 Dual [1043:4862,1043:4857] + 78 -> ASUSTeK P7131 Dual [1043:4862] 79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B) 80 -> ASUS Digimatrix TV [1043:0210] 81 -> Philips Tiger reference design [1131:2018] @@ -150,3 +150,4 @@ 149 -> Avermedia PCI pure analog (M135A) [1461:f11d] 150 -> Zogis Real Angel 220 151 -> ADS Tech Instant HDTV [1421:0380] +152 -> Asus Tiger Rev:1.00 [1043:4857] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index a2653b82e06..c9392c4e92f 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4527,7 +4527,7 @@ struct saa7134_board saa7134_boards[] = { .amux = LINE2, .tv = 1, .gpio = 0x624000, - }, { + }, { .name = name_comp1, .vmux = 1, .amux = LINE1, @@ -4564,14 +4564,48 @@ struct saa7134_board saa7134_boards[] = { .tv = 1, }, { .name = name_comp, - .vmux = 4, - .amux = LINE1, + .vmux = 4, + .amux = LINE1, }, { .name = name_svideo, .vmux = 8, .amux = LINE1, } }, }, + [SAA7134_BOARD_ASUSTeK_TIGER] = { + .name = "Asus Tiger Rev:1.00", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 0, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + }, { + .name = name_comp2, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -5358,8 +5392,8 @@ struct pci_device_id saa7134_pci_tbl[] = { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x1043, - .subdevice = 0x4857, - .driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL, + .subdevice = 0x4857, /* REV:1.00 */ + .driver_data = SAA7134_BOARD_ASUSTeK_TIGER, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -6177,6 +6211,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) case SAA7134_BOARD_PINNACLE_PCTV_310i: case SAA7134_BOARD_KWORLD_DVBT_210: case SAA7134_BOARD_TEVION_DVBT_220RF: + case SAA7134_BOARD_ASUSTeK_TIGER: case SAA7134_BOARD_ASUSTeK_P7131_DUAL: case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: case SAA7134_BOARD_MEDION_MD8800_QUADRO: diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 2c5185778af..87c10983266 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1335,6 +1335,11 @@ static int dvb_init(struct saa7134_dev *dev) } } break; + case SAA7134_BOARD_ASUSTeK_TIGER: + if (configure_tda827x_fe(dev, &philips_tiger_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; + break; default: wprintk("Huh? unknown DVB card?\n"); break; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 0907c70dc48..491ab1f8fdd 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -274,6 +274,7 @@ struct saa7134_format { #define SAA7134_BOARD_AVERMEDIA_M135A 149 #define SAA7134_BOARD_REAL_ANGEL_220 150 #define SAA7134_BOARD_ADS_INSTANT_HDTV_PCI 151 +#define SAA7134_BOARD_ASUSTeK_TIGER 152 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 -- cgit v1.2.3-70-g09d2 From 57f51dbc45f65f7ee1e8c8f77200bb8000e3e271 Mon Sep 17 00:00:00 2001 From: Oleg Roitburd Date: Wed, 8 Oct 2008 06:48:08 -0300 Subject: V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards Added support for Prof 7300 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd Signed-off-by: Steven Toth [mchehab@redhat.com: fixed CARDLIST.cx88 entry] Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx88 | 1 + drivers/media/video/cx88/cx88-cards.c | 27 +++++++++++++++++---------- drivers/media/video/cx88/cx88-dvb.c | 9 +-------- drivers/media/video/cx88/cx88.h | 1 + 4 files changed, 20 insertions(+), 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 50d0b1c559a..a5227e308f4 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -73,3 +73,4 @@ 72 -> TBS 8920 DVB-S/S2 [8920:8888] 73 -> TeVii S420 DVB-S [d420:9022] 74 -> Prolink Pixelview Global Extreme [1554:4976] + 75 -> PROF 7300 DVB-S/S2 [B033:3033] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index a9e52decb6f..5da04e811ca 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1822,6 +1822,18 @@ static const struct cx88_board cx88_boards[] = { } }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_PROF_7300] = { + .name = "PROF 7300 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -2211,6 +2223,10 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x8920, .subdevice = 0x8888, .card = CX88_BOARD_TBS_8920, + }, { + .subvendor = 0xB033, + .subdevice = 0x3033, + .card = CX88_BOARD_PROF_7300, }, }; @@ -2817,18 +2833,9 @@ static void cx88_card_setup(struct cx88_core *core) } case CX88_BOARD_TEVII_S420: case CX88_BOARD_TEVII_S460: - cx_write(MO_SRST_IO, 0); - msleep(100); - cx_write(MO_SRST_IO, 1); - msleep(100); - break; case CX88_BOARD_OMICOM_SS4_PCI: - cx_write(MO_SRST_IO, 0); - msleep(100); - cx_write(MO_SRST_IO, 1); - msleep(100); - break; case CX88_BOARD_TBS_8920: + case CX88_BOARD_PROF_7300: cx_write(MO_SRST_IO, 0); msleep(100); cx_write(MO_SRST_IO, 1); diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index cccf38222a3..344ed2626e5 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -978,15 +978,8 @@ static int dvb_register(struct cx8802_dev *dev) } break; case CX88_BOARD_OMICOM_SS4_PCI: - dev->dvb.frontend = dvb_attach(cx24116_attach, - &hauppauge_hvr4000_config, - &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; - dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; - } - break; case CX88_BOARD_TBS_8920: + case CX88_BOARD_PROF_7300: dev->dvb.frontend = dvb_attach(cx24116_attach, &hauppauge_hvr4000_config, &core->i2c_adap); diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index dce7d36edb4..dbf01b8b57a 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -228,6 +228,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_TBS_8920 72 #define CX88_BOARD_TEVII_S420 73 #define CX88_BOARD_PROLINK_PV_GLOBAL_XTREME 74 +#define CX88_BOARD_PROF_7300 75 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v1.2.3-70-g09d2 From 5b70a097052fff3831d8b94541452e7c29426777 Mon Sep 17 00:00:00 2001 From: John Rigby Date: Tue, 7 Oct 2008 13:00:18 -0600 Subject: powerpc: 83xx: pci: Remove need for get_immrbase from mpc83xx_add_bridge. Modify mpc83xx_add_bridge to get config space register base address from the device tree instead of immr + hardcoded offset. 83xx pci nodes have this change: register properties now contain two address length tuples: First is the pci bridge register base, this has always been there. Second is the config base, this is new. This is documented in dts-bindings/fsl/83xx-512x-pci.txt The changes accomplish these things: mpc83xx_add_bridge no longer needs to call get_immrbase it uses hard coded addresses if the second register value is missing Signed-off-by: John Rigby Signed-off-by: Kumar Gala --- .../powerpc/dts-bindings/fsl/83xx-512x-pci.txt | 40 ++++++++++++++++ arch/powerpc/boot/dts/mpc8313erdb.dts | 3 +- arch/powerpc/boot/dts/mpc8315erdb.dts | 3 +- arch/powerpc/boot/dts/mpc832x_mds.dts | 3 +- arch/powerpc/boot/dts/mpc832x_rdb.dts | 3 +- arch/powerpc/boot/dts/mpc8349emitx.dts | 6 ++- arch/powerpc/boot/dts/mpc8349emitxgp.dts | 3 +- arch/powerpc/boot/dts/mpc834x_mds.dts | 6 ++- arch/powerpc/boot/dts/mpc836x_mds.dts | 3 +- arch/powerpc/boot/dts/mpc836x_rdk.dts | 3 +- arch/powerpc/boot/dts/mpc8377_mds.dts | 3 +- arch/powerpc/boot/dts/mpc8377_rdb.dts | 3 +- arch/powerpc/boot/dts/mpc8378_mds.dts | 3 +- arch/powerpc/boot/dts/mpc8378_rdb.dts | 3 +- arch/powerpc/boot/dts/mpc8379_mds.dts | 3 +- arch/powerpc/boot/dts/mpc8379_rdb.dts | 3 +- arch/powerpc/boot/dts/sbc8349.dts | 3 +- arch/powerpc/sysdev/fsl_pci.c | 54 ++++++++++++++-------- 18 files changed, 111 insertions(+), 37 deletions(-) create mode 100644 Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt (limited to 'Documentation') diff --git a/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt b/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt new file mode 100644 index 00000000000..35a46536240 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt @@ -0,0 +1,40 @@ +* Freescale 83xx and 512x PCI bridges + +Freescale 83xx and 512x SOCs include the same pci bridge core. + +83xx/512x specific notes: +- reg: should contain two address length tuples + The first is for the internal pci bridge registers + The second is for the pci config space access registers + +Example (MPC8313ERDB) + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0E -mini PCI */ + 0x7000 0x0 0x0 0x1 &ipic 18 0x8 + 0x7000 0x0 0x0 0x2 &ipic 18 0x8 + 0x7000 0x0 0x0 0x3 &ipic 18 0x8 + 0x7000 0x0 0x0 0x4 &ipic 18 0x8 + + /* IDSEL 0x0F - PCI slot */ + 0x7800 0x0 0x0 0x1 &ipic 17 0x8 + 0x7800 0x0 0x0 0x2 &ipic 18 0x8 + 0x7800 0x0 0x0 0x3 &ipic 17 0x8 + 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 539085591e0..747f2767633 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -363,7 +363,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 94c9b4107a1..7449e54c1a9 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -318,7 +318,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 015808ae102..e4cc1768f24 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -423,7 +423,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index b5b0ec2eb88..226ff066652 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -331,7 +331,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 1327a61d053..5cedf373a1d 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -254,7 +254,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; @@ -280,7 +281,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008600 0x100>; + reg = <0xe0008600 0x100 /* internal registers */ + 0xe0008380 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index f70d3a0a6eb..81ae1d3e944 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -228,7 +228,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008600 0x100>; + reg = <0xe0008600 0x100 /* internal registers */ + 0xe0008380 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index e29739eee35..04bfde3ea60 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -315,7 +315,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; @@ -376,7 +377,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008600 0x100>; + reg = <0xe0008600 0x100 /* internal registers */ + 0xe0008380 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 49aec71916e..66a12d2631f 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -426,7 +426,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index 69c9bd2acd8..f747747e531 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -409,7 +409,8 @@ #interrupt-cells = <1>; device_type = "pci"; compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci"; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 0x42000000 0 0x80000000 0x80000000 0 0x10000000 0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 78f0f1124ff..87314c78b47 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -378,7 +378,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index d46327e8cb6..53191ba67aa 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -319,7 +319,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index c44f30f2f08..02941919598 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -364,7 +364,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index b3e3bd7d550..4a09153d160 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -305,7 +305,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 653ed47c9a3..13a231144dc 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -392,7 +392,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 123c8df6f4f..bbd884ac9dc 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -333,7 +333,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index c7f411f7a9a..0f941f310e4 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -272,7 +272,8 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xe0008500 0x100>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 61e6d77efa4..a3f4abadbad 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -1,7 +1,7 @@ /* - * MPC85xx/86xx PCI/PCIE support routing. + * MPC83xx/85xx/86xx PCI/PCIE support routing. * - * Copyright 2007 Freescale Semiconductor, Inc + * Copyright 2007,2008 Freescale Semiconductor, Inc * * Initial author: Xianghua Xiao * Recode: ZHANG WEI @@ -256,15 +256,42 @@ int __init mpc83xx_add_bridge(struct device_node *dev) { int len; struct pci_controller *hose; - struct resource rsrc; + struct resource rsrc_reg; + struct resource rsrc_cfg; const int *bus_range; - int primary = 1, has_address = 0; - phys_addr_t immr = get_immrbase(); + int primary; pr_debug("Adding PCI host bridge %s\n", dev->full_name); /* Fetch host bridge registers address */ - has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + if (of_address_to_resource(dev, 0, &rsrc_reg)) { + printk(KERN_WARNING "Can't get pci register base!\n"); + return -ENOMEM; + } + + memset(&rsrc_cfg, 0, sizeof(rsrc_cfg)); + + if (of_address_to_resource(dev, 1, &rsrc_cfg)) { + printk(KERN_WARNING + "No pci config register base in dev tree, " + "using default\n"); + /* + * MPC83xx supports up to two host controllers + * one at 0x8500 has config space registers at 0x8300 + * one at 0x8600 has config space registers at 0x8380 + */ + if ((rsrc_reg.start & 0xfffff) == 0x8500) + rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300; + else if ((rsrc_reg.start & 0xfffff) == 0x8600) + rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380; + } + /* + * Controller at offset 0x8500 is primary + */ + if ((rsrc_reg.start & 0xfffff) == 0x8500) + primary = 1; + else + primary = 0; /* Get bus range if any */ bus_range = of_get_property(dev, "bus-range", &len); @@ -281,22 +308,11 @@ int __init mpc83xx_add_bridge(struct device_node *dev) hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - /* MPC83xx supports up to two host controllers one at 0x8500 from immrbar - * the other at 0x8600, we consider the 0x8500 the primary controller - */ - /* PCI 1 */ - if ((rsrc.start & 0xfffff) == 0x8500) { - setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0); - } - /* PCI 2 */ - if ((rsrc.start & 0xfffff) == 0x8600) { - setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0); - primary = 0; - } + setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 4, 0); printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. " "Firmware bus number: %d->%d\n", - (unsigned long long)rsrc.start, hose->first_busno, + (unsigned long long)rsrc_reg.start, hose->first_busno, hose->last_busno); pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", -- cgit v1.2.3-70-g09d2 From b56c2768d28425783f895971854577f412ae486f Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 10 Oct 2008 11:52:31 -0500 Subject: powerpc: document the "fsl,ssi-dma-channel" compatible property The "fsl,ssi-dma-channel" compatible property is used to specify a DMA channel on the Freescale Elo DMA controller that should be used exclusively by the Freescale SSI audio controller. When a property is marked as such, the Elo DMA driver will ignore it, and so it will be available for the sound drivers. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- Documentation/powerpc/dts-bindings/fsl/dma.txt | 13 +++++++++++-- Documentation/powerpc/dts-bindings/fsl/ssi.txt | 20 ++++++++++++++------ 2 files changed, 25 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/powerpc/dts-bindings/fsl/dma.txt b/Documentation/powerpc/dts-bindings/fsl/dma.txt index 86826df00e6..cc453110fc4 100644 --- a/Documentation/powerpc/dts-bindings/fsl/dma.txt +++ b/Documentation/powerpc/dts-bindings/fsl/dma.txt @@ -20,7 +20,7 @@ Required properties: - compatible : compatible list, contains 2 entries, first is "fsl,CHIP-dma-channel", where CHIP is the processor (mpc8349, mpc8350, etc.) and the second is - "fsl,elo-dma-channel" + "fsl,elo-dma-channel". However, see note below. - reg : - cell-index : dma channel index starts at 0. @@ -82,7 +82,7 @@ Required properties: - compatible : compatible list, contains 2 entries, first is "fsl,CHIP-dma-channel", where CHIP is the processor (mpc8540, mpc8560, etc.) and the second is - "fsl,eloplus-dma-channel" + "fsl,eloplus-dma-channel". However, see note below. - cell-index : dma channel index starts at 0. - reg : - interrupts : @@ -125,3 +125,12 @@ Example: interrupts = <17 2>; }; }; + +Note on DMA channel compatible properties: The compatible property must say +"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA +driver (fsldma). Any DMA channel used by fsldma cannot be used by another +DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA +channel that should be used for another driver should not use +"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for +example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt +for more information. diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt index 5d9841303ca..a2d963998a6 100644 --- a/Documentation/powerpc/dts-bindings/fsl/ssi.txt +++ b/Documentation/powerpc/dts-bindings/fsl/ssi.txt @@ -24,12 +24,12 @@ Required properties: "rj-master" - r.j., SSI is clock master "ac97-slave" - AC97 mode, SSI is clock slave "ac97-master" - AC97 mode, SSI is clock master -- fsl,playback-dma: phandle to a DMA node for the DMA channel to use for - playback of audio. This is typically dictated by SOC - design. See the notes below. -- fsl,capture-dma: phandle to a DMA node for the DMA channel to use for - capture (recording) of audio. This is typically dictated - by SOC design. See the notes below. +- fsl,playback-dma: phandle to a node for the DMA channel to use for + playback of audio. This is typically dictated by SOC + design. See the notes below. +- fsl,capture-dma: phandle to a node for the DMA channel to use for + capture (recording) of audio. This is typically dictated + by SOC design. See the notes below. Optional properties: - codec-handle : phandle to a 'codec' node that defines an audio @@ -51,3 +51,11 @@ playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for playback and DMA channel 3 for capture. The developer can choose which DMA controller to use, but the channels themselves are hard-wired. The purpose of these two properties is to represent this hardware design. + +The device tree nodes for the DMA channels that are referenced by +"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with +"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g. +"fsl,mpc8610-dma-channel") can remain. If these nodes are left as +"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA +drivers (fsldma) will attempt to use them, and it will conflict with the +sound drivers. -- cgit v1.2.3-70-g09d2 From 02f11f392434656f00fdcc8c51348d52bd39afe8 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 13 Oct 2008 10:31:59 +0100 Subject: coldfire: scheduled SERIAL_COLDFIRE removal This patch contains the scheduled removal of the obsolete SERIAL_COLDFIRE driver. Signed-off-by: Adrian Bunk Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- Documentation/feature-removal-schedule.txt | 8 - drivers/serial/Kconfig | 16 +- drivers/serial/Makefile | 1 - drivers/serial/mcfserial.c | 1965 ---------------------------- drivers/serial/mcfserial.h | 74 -- 5 files changed, 2 insertions(+), 2062 deletions(-) delete mode 100644 drivers/serial/mcfserial.c delete mode 100644 drivers/serial/mcfserial.h (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 3d2d0c29f02..cc8093c15cf 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -287,14 +287,6 @@ Who: Glauber Costa --------------------------- -What: old style serial driver for ColdFire (CONFIG_SERIAL_COLDFIRE) -When: 2.6.28 -Why: This driver still uses the old interface and has been replaced - by CONFIG_SERIAL_MCF. -Who: Sebastian Siewior - ---------------------------- - What: /sys/o2cb symlink When: January 2010 Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 77cb34270fc..0db20452c79 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -994,24 +994,12 @@ config SERIAL_68328_RTS_CTS bool "Support RTS/CTS on 68328 serial port" depends on SERIAL_68328 -config SERIAL_COLDFIRE - bool "ColdFire serial support (DEPRECATED)" - depends on COLDFIRE - help - This driver supports the built-in serial ports of the Motorola ColdFire - family of CPUs. - This driver is deprecated because it supports only the old interface - for serial drivers and features like magic keys are not working. - Please switch to the new style driver because this driver will be - removed soon. - config SERIAL_MCF - bool "Coldfire serial support (new style driver)" + bool "Coldfire serial support" depends on COLDFIRE select SERIAL_CORE help - This new serial driver supports the Freescale Coldfire serial ports - using the new serial driver subsystem. + This serial driver supports the Freescale Coldfire serial ports. config SERIAL_MCF_BAUDRATE int "Default baudrate for Coldfire serial ports" diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 7e7383e890d..1462eb3f7bd 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -40,7 +40,6 @@ obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o obj-$(CONFIG_SERIAL_68360) += 68360serial.o -obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o obj-$(CONFIG_SERIAL_MCF) += mcf.o obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c deleted file mode 100644 index fbe3835f6b7..00000000000 --- a/drivers/serial/mcfserial.c +++ /dev/null @@ -1,1965 +0,0 @@ -#warning This driver is deprecated. Check Kconfig for details. -/* - * mcfserial.c -- serial driver for ColdFire internal UARTS. - * - * Copyright (C) 1999-2003 Greg Ungerer - * Copyright (c) 2000-2001 Lineo, Inc. - * Copyright (C) 2001-2002 SnapGear Inc. - * - * Based on code from 68332serial.c which was: - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1998 TSHG - * Copyright (c) 1999 Rt-Control Inc. - * - * Changes: - * 08/07/2003 Daniele Bellucci - * some cleanups in mcfrs_write. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "mcfserial.h" - -struct timer_list mcfrs_timer_struct; - -/* - * Default console baud rate, we use this as the default - * for all ports so init can just open /dev/console and - * keep going. Perhaps one day the cflag settings for the - * console can be used instead. - */ -#if defined(CONFIG_HW_FEITH) -#define CONSOLE_BAUD_RATE 38400 -#define DEFAULT_CBAUD B38400 -#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \ - defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) -#define CONSOLE_BAUD_RATE 115200 -#define DEFAULT_CBAUD B115200 -#elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \ - defined(CONFIG_senTec) || defined(CONFIG_SNEHA) || defined(CONFIG_AVNET) -#define CONSOLE_BAUD_RATE 19200 -#define DEFAULT_CBAUD B19200 -#endif - -#ifndef CONSOLE_BAUD_RATE -#define CONSOLE_BAUD_RATE 9600 -#define DEFAULT_CBAUD B9600 -#endif - -int mcfrs_console_inited = 0; -int mcfrs_console_port = -1; -int mcfrs_console_baud = CONSOLE_BAUD_RATE; -int mcfrs_console_cbaud = DEFAULT_CBAUD; - -/* - * Driver data structures. - */ -static struct tty_driver *mcfrs_serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -/* Debugging... - */ -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_FLOW - -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) || defined(CONFIG_M532x) -#define IRQBASE (MCFINT_VECBASE+MCFINT_UART0) -#else -#define IRQBASE 73 -#endif - -/* - * Configuration table, UARTs to look for at startup. - */ -static struct mcf_serial mcfrs_table[] = { - { /* ttyS0 */ - .magic = 0, - .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE1), - .irq = IRQBASE, - .flags = ASYNC_BOOT_AUTOCONF, - }, -#ifdef MCFUART_BASE2 - { /* ttyS1 */ - .magic = 0, - .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2), - .irq = IRQBASE+1, - .flags = ASYNC_BOOT_AUTOCONF, - }, -#endif -#ifdef MCFUART_BASE3 - { /* ttyS2 */ - .magic = 0, - .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3), - .irq = IRQBASE+2, - .flags = ASYNC_BOOT_AUTOCONF, - }, -#endif -#ifdef MCFUART_BASE4 - { /* ttyS3 */ - .magic = 0, - .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4), - .irq = IRQBASE+3, - .flags = ASYNC_BOOT_AUTOCONF, - }, -#endif -}; - - -#define NR_PORTS (sizeof(mcfrs_table) / sizeof(struct mcf_serial)) - -/* - * This is used to figure out the divisor speeds and the timeouts. - */ -static int mcfrs_baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, - 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 -}; -#define MCFRS_BAUD_TABLE_SIZE \ - (sizeof(mcfrs_baud_table)/sizeof(mcfrs_baud_table[0])) - - -#ifdef CONFIG_MAGIC_SYSRQ -/* - * Magic system request keys. Used for debugging... - */ -extern int magic_sysrq_key(int ch); -#endif - - -/* - * Forware declarations... - */ -static void mcfrs_change_speed(struct mcf_serial *info); -static void mcfrs_wait_until_sent(struct tty_struct *tty, int timeout); - - -static inline int serial_paranoia_check(struct mcf_serial *info, - char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - static const char badmagic[] = - "MCFRS(warning): bad magic number for serial struct %s in %s\n"; - static const char badinfo[] = - "MCFRS(warning): null mcf_serial for %s in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != SERIAL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -/* - * Sets or clears DTR and RTS on the requested line. - */ -static void mcfrs_setsignals(struct mcf_serial *info, int dtr, int rts) -{ - volatile unsigned char *uartp; - unsigned long flags; - -#if 0 - printk("%s(%d): mcfrs_setsignals(info=%x,dtr=%d,rts=%d)\n", - __FILE__, __LINE__, info, dtr, rts); -#endif - - local_irq_save(flags); - if (dtr >= 0) { -#ifdef MCFPP_DTR0 - if (info->line) - mcf_setppdata(MCFPP_DTR1, (dtr ? 0 : MCFPP_DTR1)); - else - mcf_setppdata(MCFPP_DTR0, (dtr ? 0 : MCFPP_DTR0)); -#endif - } - if (rts >= 0) { - uartp = info->addr; - if (rts) { - info->sigs |= TIOCM_RTS; - uartp[MCFUART_UOP1] = MCFUART_UOP_RTS; - } else { - info->sigs &= ~TIOCM_RTS; - uartp[MCFUART_UOP0] = MCFUART_UOP_RTS; - } - } - local_irq_restore(flags); - return; -} - -/* - * Gets values of serial signals. - */ -static int mcfrs_getsignals(struct mcf_serial *info) -{ - volatile unsigned char *uartp; - unsigned long flags; - int sigs; -#if defined(CONFIG_NETtel) && defined(CONFIG_M5307) - unsigned short ppdata; -#endif - -#if 0 - printk("%s(%d): mcfrs_getsignals(info=%x)\n", __FILE__, __LINE__); -#endif - - local_irq_save(flags); - uartp = info->addr; - sigs = (uartp[MCFUART_UIPR] & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS; - sigs |= (info->sigs & TIOCM_RTS); - -#ifdef MCFPP_DCD0 -{ - unsigned int ppdata; - ppdata = mcf_getppdata(); - if (info->line == 0) { - sigs |= (ppdata & MCFPP_DCD0) ? 0 : TIOCM_CD; - sigs |= (ppdata & MCFPP_DTR0) ? 0 : TIOCM_DTR; - } else if (info->line == 1) { - sigs |= (ppdata & MCFPP_DCD1) ? 0 : TIOCM_CD; - sigs |= (ppdata & MCFPP_DTR1) ? 0 : TIOCM_DTR; - } -} -#endif - - local_irq_restore(flags); - return(sigs); -} - -/* - * ------------------------------------------------------------ - * mcfrs_stop() and mcfrs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - * ------------------------------------------------------------ - */ -static void mcfrs_stop(struct tty_struct *tty) -{ - volatile unsigned char *uartp; - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "mcfrs_stop")) - return; - - local_irq_save(flags); - uartp = info->addr; - info->imr &= ~MCFUART_UIR_TXREADY; - uartp[MCFUART_UIMR] = info->imr; - local_irq_restore(flags); -} - -static void mcfrs_start(struct tty_struct *tty) -{ - volatile unsigned char *uartp; - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "mcfrs_start")) - return; - - local_irq_save(flags); - if (info->xmit_cnt && info->xmit_buf) { - uartp = info->addr; - info->imr |= MCFUART_UIR_TXREADY; - uartp[MCFUART_UIMR] = info->imr; - } - local_irq_restore(flags); -} - -/* - * ---------------------------------------------------------------------- - * - * Here starts the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * mcfrs_interrupt(). They were separated out for readability's sake. - * - * Note: mcfrs_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * mcfrs_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c - * - * and look at the resulting assemble code in serial.s. - * - * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 - * ----------------------------------------------------------------------- - */ - -static inline void receive_chars(struct mcf_serial *info) -{ - volatile unsigned char *uartp; - struct tty_struct *tty = info->port.tty; - unsigned char status, ch, flag; - - if (!tty) - return; - - uartp = info->addr; - - while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) { - ch = uartp[MCFUART_URB]; - info->stats.rx++; - -#ifdef CONFIG_MAGIC_SYSRQ - if (mcfrs_console_inited && (info->line == mcfrs_console_port)) { - if (magic_sysrq_key(ch)) - continue; - } -#endif - - flag = TTY_NORMAL; - if (status & MCFUART_USR_RXERR) { - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; - if (status & MCFUART_USR_RXBREAK) { - info->stats.rxbreak++; - flag = TTY_BREAK; - } else if (status & MCFUART_USR_RXPARITY) { - info->stats.rxparity++; - flag = TTY_PARITY; - } else if (status & MCFUART_USR_RXOVERRUN) { - info->stats.rxoverrun++; - flag = TTY_OVERRUN; - } else if (status & MCFUART_USR_RXFRAMING) { - info->stats.rxframing++; - flag = TTY_FRAME; - } - } - tty_insert_flip_char(tty, ch, flag); - } - tty_schedule_flip(tty); - return; -} - -static inline void transmit_chars(struct mcf_serial *info) -{ - volatile unsigned char *uartp; - - uartp = info->addr; - - if (info->x_char) { - /* Send special char - probably flow control */ - uartp[MCFUART_UTB] = info->x_char; - info->x_char = 0; - info->stats.tx++; - } - - if ((info->xmit_cnt <= 0) || info->port.tty->stopped) { - info->imr &= ~MCFUART_UIR_TXREADY; - uartp[MCFUART_UIMR] = info->imr; - return; - } - - while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) { - uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++]; - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - info->stats.tx++; - if (--info->xmit_cnt <= 0) - break; - } - - if (info->xmit_cnt < WAKEUP_CHARS) - schedule_work(&info->tqueue); - return; -} - -/* - * This is the serial driver's generic interrupt routine - */ -irqreturn_t mcfrs_interrupt(int irq, void *dev_id) -{ - struct mcf_serial *info; - unsigned char isr; - - info = &mcfrs_table[(irq - IRQBASE)]; - isr = info->addr[MCFUART_UISR] & info->imr; - - if (isr & MCFUART_UIR_RXREADY) - receive_chars(info); - if (isr & MCFUART_UIR_TXREADY) - transmit_chars(info); - return IRQ_HANDLED; -} - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - -static void mcfrs_offintr(struct work_struct *work) -{ - struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue); - struct tty_struct *tty = info->port.tty; - - if (tty) - tty_wakeup(tty); -} - - -/* - * Change of state on a DCD line. - */ -void mcfrs_modem_change(struct mcf_serial *info, int dcd) -{ - if (info->count == 0) - return; - - if (info->flags & ASYNC_CHECK_CD) { - if (dcd) - wake_up_interruptible(&info->open_wait); - else - schedule_work(&info->tqueue_hangup); - } -} - - -#ifdef MCFPP_DCD0 - -unsigned short mcfrs_ppstatus; - -/* - * This subroutine is called when the RS_TIMER goes off. It is used - * to monitor the state of the DCD lines - since they have no edge - * sensors and interrupt generators. - */ -static void mcfrs_timer(void) -{ - unsigned int ppstatus, dcdval, i; - - ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1); - - if (ppstatus != mcfrs_ppstatus) { - for (i = 0; (i < 2); i++) { - dcdval = (i ? MCFPP_DCD1 : MCFPP_DCD0); - if ((ppstatus & dcdval) != (mcfrs_ppstatus & dcdval)) { - mcfrs_modem_change(&mcfrs_table[i], - ((ppstatus & dcdval) ? 0 : 1)); - } - } - } - mcfrs_ppstatus = ppstatus; - - /* Re-arm timer */ - mcfrs_timer_struct.expires = jiffies + HZ/25; - add_timer(&mcfrs_timer_struct); -} - -#endif /* MCFPP_DCD0 */ - - -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_serial_hangup() -> tty->hangup() -> mcfrs_hangup() - * - */ -static void do_serial_hangup(struct work_struct *work) -{ - struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue_hangup); - struct tty_struct *tty = info->port.tty; - - if (tty) - tty_hangup(tty); -} - -static int startup(struct mcf_serial * info) -{ - volatile unsigned char *uartp; - unsigned long flags; - - if (info->flags & ASYNC_INITIALIZED) - return 0; - - if (!info->xmit_buf) { - info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL); - if (!info->xmit_buf) - return -ENOMEM; - } - - local_irq_save(flags); - -#ifdef SERIAL_DEBUG_OPEN - printk("starting up ttyS%d (irq %d)...\n", info->line, info->irq); -#endif - - /* - * Reset UART, get it into known state... - */ - uartp = info->addr; - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ - mcfrs_setsignals(info, 1, 1); - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - /* - * and set the speed of the serial port - */ - mcfrs_change_speed(info); - - /* - * Lastly enable the UART transmitter and receiver, and - * interrupt enables. - */ - info->imr = MCFUART_UIR_RXREADY; - uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; - uartp[MCFUART_UIMR] = info->imr; - - info->flags |= ASYNC_INITIALIZED; - local_irq_restore(flags); - return 0; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(struct mcf_serial * info) -{ - volatile unsigned char *uartp; - unsigned long flags; - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - -#ifdef SERIAL_DEBUG_OPEN - printk("Shutting down serial port %d (irq %d)....\n", info->line, - info->irq); -#endif - - local_irq_save(flags); - - uartp = info->addr; - uartp[MCFUART_UIMR] = 0; /* mask all interrupts */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ - - if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) - mcfrs_setsignals(info, 0, 0); - - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = 0; - } - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - local_irq_restore(flags); -} - - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static void mcfrs_change_speed(struct mcf_serial *info) -{ - volatile unsigned char *uartp; - unsigned int baudclk, cflag; - unsigned long flags; - unsigned char mr1, mr2; - int i; -#ifdef CONFIG_M5272 - unsigned int fraction; -#endif - - if (!info->port.tty || !info->port.tty->termios) - return; - cflag = info->port.tty->termios->c_cflag; - if (info->addr == 0) - return; - -#if 0 - printk("%s(%d): mcfrs_change_speed()\n", __FILE__, __LINE__); -#endif - - i = cflag & CBAUD; - if (i & CBAUDEX) { - i &= ~CBAUDEX; - if (i < 1 || i > 4) - info->port.tty->termios->c_cflag &= ~CBAUDEX; - else - i += 15; - } - if (i == 0) { - mcfrs_setsignals(info, 0, -1); - return; - } - - /* compute the baudrate clock */ -#ifdef CONFIG_M5272 - /* - * For the MCF5272, also compute the baudrate fraction. - */ - baudclk = (MCF_BUSCLK / mcfrs_baud_table[i]) / 32; - fraction = MCF_BUSCLK - (baudclk * 32 * mcfrs_baud_table[i]); - fraction *= 16; - fraction /= (32 * mcfrs_baud_table[i]); -#else - baudclk = ((MCF_BUSCLK / mcfrs_baud_table[i]) + 16) / 32; -#endif - - info->baud = mcfrs_baud_table[i]; - - mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; - mr2 = 0; - - switch (cflag & CSIZE) { - case CS5: mr1 |= MCFUART_MR1_CS5; break; - case CS6: mr1 |= MCFUART_MR1_CS6; break; - case CS7: mr1 |= MCFUART_MR1_CS7; break; - case CS8: - default: mr1 |= MCFUART_MR1_CS8; break; - } - - if (cflag & PARENB) { - if (cflag & CMSPAR) { - if (cflag & PARODD) - mr1 |= MCFUART_MR1_PARITYMARK; - else - mr1 |= MCFUART_MR1_PARITYSPACE; - } else { - if (cflag & PARODD) - mr1 |= MCFUART_MR1_PARITYODD; - else - mr1 |= MCFUART_MR1_PARITYEVEN; - } - } else { - mr1 |= MCFUART_MR1_PARITYNONE; - } - - if (cflag & CSTOPB) - mr2 |= MCFUART_MR2_STOP2; - else - mr2 |= MCFUART_MR2_STOP1; - - if (cflag & CRTSCTS) { - mr1 |= MCFUART_MR1_RXRTS; - mr2 |= MCFUART_MR2_TXCTS; - } - - if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; - else - info->flags |= ASYNC_CHECK_CD; - - uartp = info->addr; - - local_irq_save(flags); -#if 0 - printk("%s(%d): mr1=%x mr2=%x baudclk=%x\n", __FILE__, __LINE__, - mr1, mr2, baudclk); -#endif - /* - Note: pg 12-16 of MCF5206e User's Manual states that a - software reset should be performed prior to changing - UMR1,2, UCSR, UACR, bit 7 - */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */ - uartp[MCFUART_UMR] = mr1; - uartp[MCFUART_UMR] = mr2; - uartp[MCFUART_UBG1] = (baudclk & 0xff00) >> 8; /* set msb byte */ - uartp[MCFUART_UBG2] = (baudclk & 0xff); /* set lsb byte */ -#ifdef CONFIG_M5272 - uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */ -#endif - uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER; - uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; - mcfrs_setsignals(info, 1, -1); - local_irq_restore(flags); - return; -} - -static void mcfrs_flush_chars(struct tty_struct *tty) -{ - volatile unsigned char *uartp; - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "mcfrs_flush_chars")) - return; - - uartp = (volatile unsigned char *) info->addr; - - /* - * re-enable receiver interrupt - */ - local_irq_save(flags); - if ((!(info->imr & MCFUART_UIR_RXREADY)) && - (info->flags & ASYNC_INITIALIZED) ) { - info->imr |= MCFUART_UIR_RXREADY; - uartp[MCFUART_UIMR] = info->imr; - } - local_irq_restore(flags); - - if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !info->xmit_buf) - return; - - /* Enable transmitter */ - local_irq_save(flags); - info->imr |= MCFUART_UIR_TXREADY; - uartp[MCFUART_UIMR] = info->imr; - local_irq_restore(flags); -} - -static int mcfrs_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - volatile unsigned char *uartp; - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; - unsigned long flags; - int c, total = 0; - -#if 0 - printk("%s(%d): mcfrs_write(tty=%x,buf=%x,count=%d)\n", - __FILE__, __LINE__, (int)tty, (int)buf, count); -#endif - - if (serial_paranoia_check(info, tty->name, "mcfrs_write")) - return 0; - - if (!tty || !info->xmit_buf) - return 0; - - local_save_flags(flags); - while (1) { - local_irq_disable(); - c = min(count, (int) min(((int)SERIAL_XMIT_SIZE) - info->xmit_cnt - 1, - ((int)SERIAL_XMIT_SIZE) - info->xmit_head)); - local_irq_restore(flags); - - if (c <= 0) - break; - - memcpy(info->xmit_buf + info->xmit_head, buf, c); - - local_irq_disable(); - info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt += c; - local_irq_restore(flags); - - buf += c; - count -= c; - total += c; - } - - local_irq_disable(); - uartp = info->addr; - info->imr |= MCFUART_UIR_TXREADY; - uartp[MCFUART_UIMR] = info->imr; - local_irq_restore(flags); - - return total; -} - -static int mcfrs_write_room(struct tty_struct *tty) -{ - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; - int ret; - - if (serial_paranoia_check(info, tty->name, "mcfrs_write_room")) - return 0; - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} - -static int mcfrs_chars_in_buffer(struct tty_struct *tty) -{ - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "mcfrs_chars_in_buffer")) - return 0; - return info->xmit_cnt; -} - -static void mcfrs_flush_buffer(struct tty_struct *tty) -{ - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "mcfrs_flush_buffer")) - return; - - local_irq_save(flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - local_irq_restore(flags); - - tty_wakeup(tty); -} - -/* - * ------------------------------------------------------------ - * mcfrs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void mcfrs_throttle(struct tty_struct * tty) -{ - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "mcfrs_throttle")) - return; - - if (I_IXOFF(tty)) - info->x_char = STOP_CHAR(tty); - - /* Turn off RTS line (do this atomic) */ -} - -static void mcfrs_unthrottle(struct tty_struct * tty) -{ - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("unthrottle %s: %d....\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "mcfrs_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - info->x_char = START_CHAR(tty); - } - - /* Assert RTS line (do this atomic) */ -} - -/* - * ------------------------------------------------------------ - * mcfrs_ioctl() and friends - * ------------------------------------------------------------ - */ - -static int get_serial_info(struct mcf_serial * info, - struct serial_struct * retinfo) -{ - struct serial_struct tmp; - - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->line; - tmp.port = (unsigned int) info->addr; - tmp.irq = info->irq; - tmp.flags = info->flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0; -} - -static int set_serial_info(struct mcf_serial * info, - struct serial_struct * new_info) -{ - struct serial_struct new_serial; - struct mcf_serial old_info; - int retval = 0; - - if (!new_info) - return -EFAULT; - if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) - return -EFAULT; - old_info = *info; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != info->baud_base) || - (new_serial.type != info->type) || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != - (info->flags & ~ASYNC_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - info->custom_divisor = new_serial.custom_divisor; - goto check_and_exit; - } - - if (info->count > 1) - return -EBUSY; - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->baud_base = new_serial.baud_base; - info->flags = ((info->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->type = new_serial.type; - info->close_delay = new_serial.close_delay; - info->closing_wait = new_serial.closing_wait; - -check_and_exit: - retval = startup(info); - return retval; -} - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct mcf_serial * info, unsigned int *value) -{ - volatile unsigned char *uartp; - unsigned long flags; - unsigned char status; - - local_irq_save(flags); - uartp = info->addr; - status = (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) ? TIOCSER_TEMT : 0; - local_irq_restore(flags); - - return put_user(status,value); -} - -/* - * This routine sends a break character out the serial port. - */ -static void send_break( struct mcf_serial * info, int duration) -{ - volatile unsigned char *uartp; - unsigned long flags; - - if (!info->addr) - return; - set_current_state(TASK_INTERRUPTIBLE); - uartp = info->addr; - - local_irq_save(flags); - uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTART; - schedule_timeout(duration); - uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTOP; - local_irq_restore(flags); -} - -static int mcfrs_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl")) - return -ENODEV; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - return mcfrs_getsignals(info); -} - -static int mcfrs_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; - int rts = -1, dtr = -1; - - if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl")) - return -ENODEV; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - if (set & TIOCM_RTS) - rts = 1; - if (set & TIOCM_DTR) - dtr = 1; - if (clear & TIOCM_RTS) - rts = 0; - if (clear & TIOCM_DTR) - dtr = 0; - - mcfrs_setsignals(info, dtr, rts); - - return 0; -} - -static int mcfrs_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) -{ - struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; - int retval, error; - - if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl")) - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && - (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (!arg) - send_break(info, HZ/4); /* 1/4 second */ - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - send_break(info, arg ? arg*(HZ/10) : HZ/4); - return 0; - case TIOCGSERIAL: - if (access_ok(VERIFY_WRITE, (void *) arg, - sizeof(struct serial_struct))) - return get_serial_info(info, - (struct serial_struct *) arg); - return -EFAULT; - case TIOCSSERIAL: - return set_serial_info(info, - (struct serial_struct *) arg); - case TIOCSERGETLSR: /* Get line status register */ - if (access_ok(VERIFY_WRITE, (void *) arg, - sizeof(unsigned int))) - return get_lsr_info(info, (unsigned int *) arg); - return -EFAULT; - case TIOCSERGSTRUCT: - error = copy_to_user((struct mcf_serial *) arg, - info, sizeof(struct mcf_serial)); - if (error) - return -EFAULT; - return 0; - -#ifdef TIOCSET422 - case TIOCSET422: { - unsigned int val; - get_user(val, (unsigned int *) arg); - mcf_setpa(MCFPP_PA11, (val ? 0 : MCFPP_PA11)); - break; - } - case TIOCGET422: { - unsigned int val; - val = (mcf_getpa() & MCFPP_PA11) ? 0 : 1; - put_user(val, (unsigned int *) arg); - break; - } -#endif - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; - - if (tty->termios->c_cflag == old_termios->c_cflag) - return; - - mcfrs_change_speed(info); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - mcfrs_setsignals(info, -1, 1); -#if 0 - mcfrs_start(tty); -#endif - } -} - -/* - * ------------------------------------------------------------ - * mcfrs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * S structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void mcfrs_close(struct tty_struct *tty, struct file * filp) -{ - volatile unsigned char *uartp; - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; - unsigned long flags; - - if (!info || serial_paranoia_check(info, tty->name, "mcfrs_close")) - return; - - local_irq_save(flags); - - if (tty_hung_up_p(filp)) { - local_irq_restore(flags); - return; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("mcfrs_close ttyS%d, count = %d\n", info->line, info->count); -#endif - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("MCFRS: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->count); - info->count = 1; - } - if (--info->count < 0) { - printk("MCFRS: bad serial port count for ttyS%d: %d\n", - info->line, info->count); - info->count = 0; - } - if (info->count) { - local_irq_restore(flags); - return; - } - info->flags |= ASYNC_CLOSING; - - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - info->imr &= ~MCFUART_UIR_RXREADY; - uartp = info->addr; - uartp[MCFUART_UIMR] = info->imr; - -#if 0 - /* FIXME: do we need to keep this enabled for console?? */ - if (mcfrs_console_inited && (mcfrs_console_port == info->line)) { - /* Do not disable the UART */ ; - } else -#endif - shutdown(info); - mcfrs_flush_buffer(tty); - tty_ldisc_flush(tty); - - tty->closing = 0; - info->event = 0; - info->port.tty = NULL; -#if 0 - if (tty->ldisc.num != ldiscs[N_TTY].num) { - if (tty->ldisc.close) - (tty->ldisc.close)(tty); - tty->ldisc = ldiscs[N_TTY]; - tty->termios->c_line = N_TTY; - if (tty->ldisc.open) - (tty->ldisc.open)(tty); - } -#endif - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - local_irq_restore(flags); -} - -/* - * mcfrs_wait_until_sent() --- wait until the transmitter is empty - */ -static void -mcfrs_wait_until_sent(struct tty_struct *tty, int timeout) -{ -#ifdef CONFIG_M5272 -#define MCF5272_FIFO_SIZE 25 /* fifo size + shift reg */ - - struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; - volatile unsigned char *uartp; - unsigned long orig_jiffies, fifo_time, char_time, fifo_cnt; - - if (serial_paranoia_check(info, tty->name, "mcfrs_wait_until_sent")) - return; - - orig_jiffies = jiffies; - - /* - * Set the check interval to be 1/5 of the approximate time - * to send the entire fifo, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - lock_kernel(); - - fifo_time = (MCF5272_FIFO_SIZE * HZ * 10) / info->baud; - char_time = fifo_time / 5; - if (char_time == 0) - char_time = 1; - if (timeout && timeout < char_time) - char_time = timeout; - - /* - * Clamp the timeout period at 2 * the time to empty the - * fifo. Just to be safe, set the minimum at .5 seconds. - */ - fifo_time *= 2; - if (fifo_time < (HZ/2)) - fifo_time = HZ/2; - if (!timeout || timeout > fifo_time) - timeout = fifo_time; - - /* - * Account for the number of bytes in the UART - * transmitter FIFO plus any byte being shifted out. - */ - uartp = (volatile unsigned char *) info->addr; - for (;;) { - fifo_cnt = (uartp[MCFUART_UTF] & MCFUART_UTF_TXB); - if ((uartp[MCFUART_USR] & (MCFUART_USR_TXREADY| - MCFUART_USR_TXEMPTY)) == - MCFUART_USR_TXREADY) - fifo_cnt++; - if (fifo_cnt == 0) - break; - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - unlock_kernel(); -#else - /* - * For the other coldfire models, assume all data has been sent - */ -#endif -} - -/* - * mcfrs_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -void mcfrs_hangup(struct tty_struct *tty) -{ - struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "mcfrs_hangup")) - return; - - mcfrs_flush_buffer(tty); - shutdown(info); - info->event = 0; - info->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * ------------------------------------------------------------ - * mcfrs_open() and friends - * ------------------------------------------------------------ - */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, - struct mcf_serial *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (info->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&info->close_wait); -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * mcfrs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: ttyS%d, count = %d\n", - info->line, info->count); -#endif - info->count--; - info->blocked_open++; - while (1) { - local_irq_disable(); - mcfrs_setsignals(info, 1, 1); - local_irq_enable(); - current->state = TASK_INTERRUPTIBLE; - if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (!(info->flags & ASYNC_CLOSING) && - (do_clocal || (mcfrs_getsignals(info) & TIOCM_CD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: ttyS%d, count = %d\n", - info->line, info->count); -#endif - schedule(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)) - info->count++; - info->blocked_open--; -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: ttyS%d, count = %d\n", - info->line, info->count); -#endif - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -int mcfrs_open(struct tty_struct *tty, struct file * filp) -{ - struct mcf_serial *info; - int retval, line; - - line = tty->index; - if ((line < 0) || (line >= NR_PORTS)) - return -ENODEV; - info = mcfrs_table + line; - if (serial_paranoia_check(info, tty->name, "mcfrs_open")) - return -ENODEV; -#ifdef SERIAL_DEBUG_OPEN - printk("mcfrs_open %s, count = %d\n", tty->name, info->count); -#endif - info->count++; - tty->driver_data = info; - info->port.tty = tty; - - /* - * Start up serial port - */ - retval = startup(info); - if (retval) - return retval; - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk("mcfrs_open returning after block_til_ready with %d\n", - retval); -#endif - return retval; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("mcfrs_open %s successful...\n", tty->name); -#endif - return 0; -} - -/* - * Based on the line number set up the internal interrupt stuff. - */ -static void mcfrs_irqinit(struct mcf_serial *info) -{ -#if defined(CONFIG_M5272) - volatile unsigned long *icrp; - volatile unsigned long *portp; - volatile unsigned char *uartp; - - uartp = info->addr; - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR2); - - switch (info->line) { - case 0: - *icrp = 0xe0000000; - break; - case 1: - *icrp = 0x0e000000; - break; - default: - printk("MCFRS: don't know how to handle UART %d interrupt?\n", - info->line); - return; - } - - /* Enable the output lines for the serial ports */ - portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PBCNT); - *portp = (*portp & ~0x000000ff) | 0x00000055; - portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT); - *portp = (*portp & ~0x000003fc) | 0x000002a8; -#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) - volatile unsigned char *icrp, *uartp; - volatile unsigned long *imrp; - - uartp = info->addr; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 + - MCFINTC_ICR0 + MCFINT_UART0 + info->line); - *icrp = 0x30 + info->line; /* level 6, line based priority */ - - imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 + - MCFINTC_IMRL); - *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1); -#if defined(CONFIG_M527x) - { - /* - * External Pin Mask Setting & Enable External Pin for Interface - * mrcbis@aliceposta.it - */ - u16 *serpin_enable_mask; - serpin_enable_mask = (u16 *) (MCF_IPSBAR + MCF_GPIO_PAR_UART); - if (info->line == 0) - *serpin_enable_mask |= UART0_ENABLE_MASK; - else if (info->line == 1) - *serpin_enable_mask |= UART1_ENABLE_MASK; - else if (info->line == 2) - *serpin_enable_mask |= UART2_ENABLE_MASK; - } -#endif -#if defined(CONFIG_M528x) - /* make sure PUAPAR is set for UART0 and UART1 */ - if (info->line < 2) { - volatile unsigned char *portp = (volatile unsigned char *) (MCF_MBAR + MCF5282_GPIO_PUAPAR); - *portp |= (0x03 << (info->line * 2)); - } -#endif -#elif defined(CONFIG_M520x) - volatile unsigned char *icrp, *uartp; - volatile unsigned long *imrp; - - uartp = info->addr; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 + - MCFINTC_ICR0 + MCFINT_UART0 + info->line); - *icrp = 0x03; - - imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 + - MCFINTC_IMRL); - *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1); - if (info->line < 2) { - unsigned short *uart_par; - uart_par = (unsigned short *)(MCF_IPSBAR + MCF_GPIO_PAR_UART); - if (info->line == 0) - *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD0 - | MCF_GPIO_PAR_UART_PAR_URXD0; - else if (info->line == 1) - *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD1 - | MCF_GPIO_PAR_UART_PAR_URXD1; - } else if (info->line == 2) { - unsigned char *feci2c_par; - feci2c_par = (unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C); - *feci2c_par &= ~0x0F; - *feci2c_par |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 - | MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; - } -#elif defined(CONFIG_M532x) - volatile unsigned char *uartp; - uartp = info->addr; - switch (info->line) { - case 0: - MCF_INTC0_ICR26 = 0x3; - MCF_INTC0_CIMR = 26; - /* GPIO initialization */ - MCF_GPIO_PAR_UART |= 0x000F; - break; - case 1: - MCF_INTC0_ICR27 = 0x3; - MCF_INTC0_CIMR = 27; - /* GPIO initialization */ - MCF_GPIO_PAR_UART |= 0x0FF0; - break; - case 2: - MCF_INTC0_ICR28 = 0x3; - MCF_INTC0_CIMR = 28; - /* GPIOs also must be initalized, depends on board */ - break; - } -#else - volatile unsigned char *icrp, *uartp; - - switch (info->line) { - case 0: - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART1ICR); - *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 | - MCFSIM_ICR_PRI1; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); - break; - case 1: - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART2ICR); - *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 | - MCFSIM_ICR_PRI2; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); - break; - default: - printk("MCFRS: don't know how to handle UART %d interrupt?\n", - info->line); - return; - } - - uartp = info->addr; - uartp[MCFUART_UIVR] = info->irq; -#endif - - /* Clear mask, so no surprise interrupts. */ - uartp[MCFUART_UIMR] = 0; - - if (request_irq(info->irq, mcfrs_interrupt, IRQF_DISABLED, - "ColdFire UART", NULL)) { - printk("MCFRS: Unable to attach ColdFire UART %d interrupt " - "vector=%d\n", info->line, info->irq); - } - - return; -} - - -char *mcfrs_drivername = "ColdFire internal UART serial driver version 1.00\n"; - - -/* - * Serial stats reporting... - */ -int mcfrs_readproc(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - struct mcf_serial *info; - char str[20]; - int len, sigs, i; - - len = sprintf(page, mcfrs_drivername); - for (i = 0; (i < NR_PORTS); i++) { - info = &mcfrs_table[i]; - len += sprintf((page + len), "%d: port:%x irq=%d baud:%d ", - i, (unsigned int) info->addr, info->irq, info->baud); - if (info->stats.rx || info->stats.tx) - len += sprintf((page + len), "tx:%d rx:%d ", - info->stats.tx, info->stats.rx); - if (info->stats.rxframing) - len += sprintf((page + len), "fe:%d ", - info->stats.rxframing); - if (info->stats.rxparity) - len += sprintf((page + len), "pe:%d ", - info->stats.rxparity); - if (info->stats.rxbreak) - len += sprintf((page + len), "brk:%d ", - info->stats.rxbreak); - if (info->stats.rxoverrun) - len += sprintf((page + len), "oe:%d ", - info->stats.rxoverrun); - - str[0] = str[1] = 0; - if ((sigs = mcfrs_getsignals(info))) { - if (sigs & TIOCM_RTS) - strcat(str, "|RTS"); - if (sigs & TIOCM_CTS) - strcat(str, "|CTS"); - if (sigs & TIOCM_DTR) - strcat(str, "|DTR"); - if (sigs & TIOCM_CD) - strcat(str, "|CD"); - } - - len += sprintf((page + len), "%s\n", &str[1]); - } - - return(len); -} - - -/* Finally, routines used to initialize the serial driver. */ - -static void show_serial_version(void) -{ - printk(mcfrs_drivername); -} - -static const struct tty_operations mcfrs_ops = { - .open = mcfrs_open, - .close = mcfrs_close, - .write = mcfrs_write, - .flush_chars = mcfrs_flush_chars, - .write_room = mcfrs_write_room, - .chars_in_buffer = mcfrs_chars_in_buffer, - .flush_buffer = mcfrs_flush_buffer, - .ioctl = mcfrs_ioctl, - .throttle = mcfrs_throttle, - .unthrottle = mcfrs_unthrottle, - .set_termios = mcfrs_set_termios, - .stop = mcfrs_stop, - .start = mcfrs_start, - .hangup = mcfrs_hangup, - .read_proc = mcfrs_readproc, - .wait_until_sent = mcfrs_wait_until_sent, - .tiocmget = mcfrs_tiocmget, - .tiocmset = mcfrs_tiocmset, -}; - -/* mcfrs_init inits the driver */ -static int __init -mcfrs_init(void) -{ - struct mcf_serial *info; - unsigned long flags; - int i; - - /* Setup base handler, and timer table. */ -#ifdef MCFPP_DCD0 - init_timer(&mcfrs_timer_struct); - mcfrs_timer_struct.function = mcfrs_timer; - mcfrs_timer_struct.data = 0; - mcfrs_timer_struct.expires = jiffies + HZ/25; - add_timer(&mcfrs_timer_struct); - mcfrs_ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1); -#endif - mcfrs_serial_driver = alloc_tty_driver(NR_PORTS); - if (!mcfrs_serial_driver) - return -ENOMEM; - - show_serial_version(); - - /* Initialize the tty_driver structure */ - mcfrs_serial_driver->owner = THIS_MODULE; - mcfrs_serial_driver->name = "ttyS"; - mcfrs_serial_driver->driver_name = "mcfserial"; - mcfrs_serial_driver->major = TTY_MAJOR; - mcfrs_serial_driver->minor_start = 64; - mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - mcfrs_serial_driver->subtype = SERIAL_TYPE_NORMAL; - mcfrs_serial_driver->init_termios = tty_std_termios; - - mcfrs_serial_driver->init_termios.c_cflag = - mcfrs_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL; - mcfrs_serial_driver->flags = TTY_DRIVER_REAL_RAW; - - tty_set_operations(mcfrs_serial_driver, &mcfrs_ops); - - if (tty_register_driver(mcfrs_serial_driver)) { - printk("MCFRS: Couldn't register serial driver\n"); - put_tty_driver(mcfrs_serial_driver); - return(-EBUSY); - } - - local_irq_save(flags); - - /* - * Configure all the attached serial ports. - */ - for (i = 0, info = mcfrs_table; (i < NR_PORTS); i++, info++) { - info->magic = SERIAL_MAGIC; - info->line = i; - info->port.tty = NULL; - info->custom_divisor = 16; - info->close_delay = 50; - info->closing_wait = 3000; - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - INIT_WORK(&info->tqueue, mcfrs_offintr); - INIT_WORK(&info->tqueue_hangup, do_serial_hangup); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - - info->imr = 0; - mcfrs_setsignals(info, 0, 0); - mcfrs_irqinit(info); - - printk("ttyS%d at 0x%04x (irq = %d)", info->line, - (unsigned int) info->addr, info->irq); - printk(" is a builtin ColdFire UART\n"); - } - - local_irq_restore(flags); - return 0; -} - -module_init(mcfrs_init); - -/****************************************************************************/ -/* Serial Console */ -/****************************************************************************/ - -/* - * Quick and dirty UART initialization, for console output. - */ - -void mcfrs_init_console(void) -{ - volatile unsigned char *uartp; - unsigned int clk; - - /* - * Reset UART, get it into known state... - */ - uartp = (volatile unsigned char *) (MCF_MBAR + - (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1)); - - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */ - - /* - * Set port for defined baud , 8 data bits, 1 stop bit, no parity. - */ - uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8; - uartp[MCFUART_UMR] = MCFUART_MR2_STOP1; - -#ifdef CONFIG_M5272 -{ - /* - * For the MCF5272, also compute the baudrate fraction. - */ - int fraction = MCF_BUSCLK - (clk * 32 * mcfrs_console_baud); - fraction *= 16; - fraction /= (32 * mcfrs_console_baud); - uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */ - clk = (MCF_BUSCLK / mcfrs_console_baud) / 32; -} -#else - clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */ -#endif - - uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */ - uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */ - uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER; - uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; - - mcfrs_console_inited++; - return; -} - - -/* - * Setup for console. Argument comes from the boot command line. - */ - -int mcfrs_console_setup(struct console *cp, char *arg) -{ - int i, n = CONSOLE_BAUD_RATE; - - if (!cp) - return(-1); - - if (!strncmp(cp->name, "ttyS", 4)) - mcfrs_console_port = cp->index; - else if (!strncmp(cp->name, "cua", 3)) - mcfrs_console_port = cp->index; - else - return(-1); - - if (arg) - n = simple_strtoul(arg,NULL,0); - for (i = 0; i < MCFRS_BAUD_TABLE_SIZE; i++) - if (mcfrs_baud_table[i] == n) - break; - if (i < MCFRS_BAUD_TABLE_SIZE) { - mcfrs_console_baud = n; - mcfrs_console_cbaud = 0; - if (i > 15) { - mcfrs_console_cbaud |= CBAUDEX; - i -= 15; - } - mcfrs_console_cbaud |= i; - } - mcfrs_init_console(); /* make sure baud rate changes */ - return(0); -} - - -static struct tty_driver *mcfrs_console_device(struct console *c, int *index) -{ - *index = c->index; - return mcfrs_serial_driver; -} - - -/* - * Output a single character, using UART polled mode. - * This is used for console output. - */ - -int mcfrs_put_char(char ch) -{ - volatile unsigned char *uartp; - unsigned long flags; - int i; - - uartp = (volatile unsigned char *) (MCF_MBAR + - (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1)); - - local_irq_save(flags); - for (i = 0; (i < 0x10000); i++) { - if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) - break; - } - if (i < 0x10000) { - uartp[MCFUART_UTB] = ch; - for (i = 0; (i < 0x10000); i++) - if (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) - break; - } - if (i >= 0x10000) - mcfrs_init_console(); /* try and get it back */ - local_irq_restore(flags); - - return 1; -} - - -/* - * rs_console_write is registered for printk output. - */ - -void mcfrs_console_write(struct console *cp, const char *p, unsigned len) -{ - if (!mcfrs_console_inited) - mcfrs_init_console(); - while (len-- > 0) { - if (*p == '\n') - mcfrs_put_char('\r'); - mcfrs_put_char(*p++); - } -} - -/* - * declare our consoles - */ - -struct console mcfrs_console = { - .name = "ttyS", - .write = mcfrs_console_write, - .device = mcfrs_console_device, - .setup = mcfrs_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int __init mcfrs_console_init(void) -{ - register_console(&mcfrs_console); - return 0; -} - -console_initcall(mcfrs_console_init); - -/****************************************************************************/ diff --git a/drivers/serial/mcfserial.h b/drivers/serial/mcfserial.h deleted file mode 100644 index 56420e2cb11..00000000000 --- a/drivers/serial/mcfserial.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * mcfserial.c -- serial driver for ColdFire internal UARTS. - * - * Copyright (c) 1999 Greg Ungerer - * Copyright (c) 2000-2001 Lineo, Inc. - * Copyright (c) 2002 SnapGear Inc., - * - * Based on code from 68332serial.c which was: - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1998 TSHG - * Copyright (c) 1999 Rt-Control Inc. - */ -#ifndef _MCF_SERIAL_H -#define _MCF_SERIAL_H - -#include - -#ifdef __KERNEL__ - -/* - * Define a local serial stats structure. - */ - -struct mcf_stats { - unsigned int rx; - unsigned int tx; - unsigned int rxbreak; - unsigned int rxframing; - unsigned int rxparity; - unsigned int rxoverrun; -}; - - -/* - * This is our internal structure for each serial port's state. - * Each serial port has one of these structures associated with it. - */ - -struct mcf_serial { - int magic; - volatile unsigned char *addr; /* UART memory address */ - int irq; - int flags; /* defined in tty.h */ - int type; /* UART type */ - struct tty_struct *tty; - unsigned char imr; /* Software imr register */ - unsigned int baud; - int sigs; - int custom_divisor; - int x_char; /* xon/xoff character */ - int baud_base; - int close_delay; - unsigned short closing_wait; - unsigned short closing_wait2; - unsigned long event; - int line; - int count; /* # of fd on device */ - int blocked_open; /* # of blocked opens */ - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - struct mcf_stats stats; - struct work_struct tqueue; - struct work_struct tqueue_hangup; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - -}; - -#endif /* __KERNEL__ */ - -#endif /* _MCF_SERIAL_H */ -- cgit v1.2.3-70-g09d2 From 9c6102d446985bca9c426cb2d9b478ed21d2b024 Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Mon, 13 Oct 2008 21:39:50 +0200 Subject: ata: Add documentation for hard disk shock protection interface (v3) Put some information (and pointers to more) into the kernel's doc tree, describing briefly the interface to the kernel's disk head unloading facility. Information about how to set up a complete shock protection system under GNU/Linux can be found on the web and is referenced accordingly. v3: Here is some final polish including various spelling corrections pointed out by Grant Grundler and Peter Moulder. Also, I have added some information about the timing constraints related to disk head parking. The patch looks more impressive than it really is and I think it would be alright just to incorporate it into the original patch so as not to clutter up the git log. Signed-off-by: Elias Oltmanns Cc: Jeff Garzik Cc: Randy Dunlap Cc: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/laptops/disk-shock-protection.txt | 149 ++++++++++++++++++++++++ 1 file changed, 149 insertions(+) create mode 100644 Documentation/laptops/disk-shock-protection.txt (limited to 'Documentation') diff --git a/Documentation/laptops/disk-shock-protection.txt b/Documentation/laptops/disk-shock-protection.txt new file mode 100644 index 00000000000..0e6ba266383 --- /dev/null +++ b/Documentation/laptops/disk-shock-protection.txt @@ -0,0 +1,149 @@ +Hard disk shock protection +========================== + +Author: Elias Oltmanns +Last modified: 2008-10-03 + + +0. Contents +----------- + +1. Intro +2. The interface +3. References +4. CREDITS + + +1. Intro +-------- + +ATA/ATAPI-7 specifies the IDLE IMMEDIATE command with unload feature. +Issuing this command should cause the drive to switch to idle mode and +unload disk heads. This feature is being used in modern laptops in +conjunction with accelerometers and appropriate software to implement +a shock protection facility. The idea is to stop all I/O operations on +the internal hard drive and park its heads on the ramp when critical +situations are anticipated. The desire to have such a feature +available on GNU/Linux systems has been the original motivation to +implement a generic disk head parking interface in the Linux kernel. +Please note, however, that other components have to be set up on your +system in order to get disk shock protection working (see +section 3. References below for pointers to more information about +that). + + +2. The interface +---------------- + +For each ATA device, the kernel exports the file +block/*/device/unload_heads in sysfs (here assumed to be mounted under +/sys). Access to /sys/block/*/device/unload_heads is denied with +-EOPNOTSUPP if the device does not support the unload feature. +Otherwise, writing an integer value to this file will take the heads +of the respective drive off the platter and block all I/O operations +for the specified number of milliseconds. When the timeout expires and +no further disk head park request has been issued in the meantime, +normal operation will be resumed. The maximal value accepted for a +timeout is 30000 milliseconds. Exceeding this limit will return +-EOVERFLOW, but heads will be parked anyway and the timeout will be +set to 30 seconds. However, you can always change a timeout to any +value between 0 and 30000 by issuing a subsequent head park request +before the timeout of the previous one has expired. In particular, the +total timeout can exceed 30 seconds and, more importantly, you can +cancel a previously set timeout and resume normal operation +immediately by specifying a timeout of 0. Values below -2 are rejected +with -EINVAL (see below for the special meaning of -1 and -2). If the +timeout specified for a recent head park request has not yet expired, +reading from /sys/block/*/device/unload_heads will report the number +of milliseconds remaining until normal operation will be resumed; +otherwise, reading the unload_heads attribute will return 0. + +For example, do the following in order to park the heads of drive +/dev/sda and stop all I/O operations for five seconds: + +# echo 5000 > /sys/block/sda/device/unload_heads + +A simple + +# cat /sys/block/sda/device/unload_heads + +will show you how many milliseconds are left before normal operation +will be resumed. + +A word of caution: The fact that the interface operates on a basis of +milliseconds may raise expectations that cannot be satisfied in +reality. In fact, the ATA specs clearly state that the time for an +unload operation to complete is vendor specific. The hint in ATA-7 +that this will typically be within 500 milliseconds apparently has +been dropped in ATA-8. + +There is a technical detail of this implementation that may cause some +confusion and should be discussed here. When a head park request has +been issued to a device successfully, all I/O operations on the +controller port this device is attached to will be deferred. That is +to say, any other device that may be connected to the same port will +be affected too. The only exception is that a subsequent head unload +request to that other device will be executed immediately. Further +operations on that port will be deferred until the timeout specified +for either device on the port has expired. As far as PATA (old style +IDE) configurations are concerned, there can only be two devices +attached to any single port. In SATA world we have port multipliers +which means that a user-issued head parking request to one device may +actually result in stopping I/O to a whole bunch of devices. However, +since this feature is supposed to be used on laptops and does not seem +to be very useful in any other environment, there will be mostly one +device per port. Even if the CD/DVD writer happens to be connected to +the same port as the hard drive, it generally *should* recover just +fine from the occasional buffer under-run incurred by a head park +request to the HD. Actually, when you are using an ide driver rather +than its libata counterpart (i.e. your disk is called /dev/hda +instead of /dev/sda), then parking the heads of one drive (drive X) +will generally not affect the mode of operation of another drive +(drive Y) on the same port as described above. It is only when a port +reset is required to recover from an exception on drive Y that further +I/O operations on that drive (and the reset itself) will be delayed +until drive X is no longer in the parked state. + +Finally, there are some hard drives that only comply with an earlier +version of the ATA standard than ATA-7, but do support the unload +feature nonetheless. Unfortunately, there is no safe way Linux can +detect these devices, so you won't be able to write to the +unload_heads attribute. If you know that your device really does +support the unload feature (for instance, because the vendor of your +laptop or the hard drive itself told you so), then you can tell the +kernel to enable the usage of this feature for that drive by writing +the special value -1 to the unload_heads attribute: + +# echo -1 > /sys/block/sda/device/unload_heads + +will enable the feature for /dev/sda, and giving -2 instead of -1 will +disable it again. + + +3. References +------------- + +There are several laptops from different vendors featuring shock +protection capabilities. As manufacturers have refused to support open +source development of the required software components so far, Linux +support for shock protection varies considerably between different +hardware implementations. Ideally, this section should contain a list +of pointers at different projects aiming at an implementation of shock +protection on different systems. Unfortunately, I only know of a +single project which, although still considered experimental, is fit +for use. Please feel free to add projects that have been the victims +of my ignorance. + +- http://www.thinkwiki.org/wiki/HDAPS + See this page for information about Linux support of the hard disk + active protection system as implemented in IBM/Lenovo Thinkpads. + + +4. CREDITS +---------- + +This implementation of disk head parking has been inspired by a patch +originally published by Jon Escombe . My efforts +to develop an implementation of this feature that is fit to be merged +into mainline have been aided by various kernel developers, in +particular by Tejun Heo and Bartlomiej Zolnierkiewicz. -- cgit v1.2.3-70-g09d2 From a5766f11cfd3a0c03450d99c8fe548c2940be884 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Fri, 10 Oct 2008 13:22:20 +0100 Subject: regulator: core - Rework machine API to remove string based functions. This improves the machine level API in order to configure regulator constraints and consumers as platform data and removes the old string based API that required several calls to set up each regulator. The intention is to create a struct regulator_init_data, populate it's fields with constraints, consumers devices, etc and then register the regulator device from board.c in the standard Linux way. e.g. regulator LDO2 (supplying codec and sim) platform data. /* regulator LDO2 consumer devices */ static struct regulator_consumer_supply ldo2_consumers[] = { { .dev = &platform_audio_device.dev, .supply = "codec_avdd", }, { .dev = &platform_sim_device.dev, .supply = "sim_vcc", } }; /* regulator LDO2 constraints */ static struct regulator_init_data ldo2_data = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, .apply_uV = 1, }, .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), .consumer_supplies = ldo2_consumers, }; /* machine regulator devices with thier consumers and constraints */ static struct platform_device wm8350_regulator_devices[] = { { .name = "wm8350-regulator", .id = WM8350_LDO_2, .dev = { .platform_data = &ldo2_data, }, }, }; Changes in detail:- o Removed all const char* regulator config functions in machine API. o Created new struct regulator_init_data to contain regulator machine configuration constraints and consmuers. o Changed set_supply(), set_machine_constraints(), set_consumer_device_supply() to remove their string identifier parameters. Also made them static and moved functions nearer top of core.c. o Removed no longer used inline func to_rdev() o Added regulator_get_init_drvdata() to retrieve init data. o Added struct device* as parameter to regulator_register(). o Changed my email address. Signed-off-by: Eric Miao Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- Documentation/power/regulator/machine.txt | 140 ++++----- Documentation/power/regulator/regulator.txt | 8 +- drivers/regulator/bq24022.c | 21 +- drivers/regulator/core.c | 457 ++++++++++++++-------------- include/linux/regulator/driver.h | 8 +- include/linux/regulator/machine.h | 30 +- 6 files changed, 334 insertions(+), 330 deletions(-) (limited to 'Documentation') diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt index c9a35665cf7..ce3487d99ab 100644 --- a/Documentation/power/regulator/machine.txt +++ b/Documentation/power/regulator/machine.txt @@ -2,17 +2,8 @@ Regulator Machine Driver Interface =================================== The regulator machine driver interface is intended for board/machine specific -initialisation code to configure the regulator subsystem. Typical things that -machine drivers would do are :- +initialisation code to configure the regulator subsystem. - 1. Regulator -> Device mapping. - 2. Regulator supply configuration. - 3. Power Domain constraint setting. - - - -1. Regulator -> device mapping -============================== Consider the following machine :- Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] @@ -21,81 +12,82 @@ Consider the following machine :- The drivers for consumers A & B must be mapped to the correct regulator in order to control their power supply. This mapping can be achieved in machine -initialisation code by calling :- +initialisation code by creating a struct regulator_consumer_supply for +each regulator. + +struct regulator_consumer_supply { + struct device *dev; /* consumer */ + const char *supply; /* consumer supply - e.g. "vcc" */ +}; -int regulator_set_device_supply(const char *regulator, struct device *dev, - const char *supply); +e.g. for the machine above -and is shown with the following code :- +static struct regulator_consumer_supply regulator1_consumers[] = { +{ + .dev = &platform_consumerB_device.dev, + .supply = "Vcc", +},}; -regulator_set_device_supply("Regulator-1", devB, "Vcc"); -regulator_set_device_supply("Regulator-2", devA, "Vcc"); +static struct regulator_consumer_supply regulator2_consumers[] = { +{ + .dev = &platform_consumerA_device.dev, + .supply = "Vcc", +},}; This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2 to the 'Vcc' supply for Consumer A. - -2. Regulator supply configuration. -================================== -Consider the following machine (again) :- - - Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] - | - +-> [Consumer B @ 3.3V] +Constraints can now be registered by defining a struct regulator_init_data +for each regulator power domain. This structure also maps the consumers +to their supply regulator :- + +static struct regulator_init_data regulator1_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + }, + .num_consumer_supplies = ARRAY_SIZE(regulator1_consumers), + .consumer_supplies = regulator1_consumers, +}; Regulator-1 supplies power to Regulator-2. This relationship must be registered with the core so that Regulator-1 is also enabled when Consumer A enables it's -supply (Regulator-2). - -This relationship can be register with the core via :- - -int regulator_set_supply(const char *regulator, const char *regulator_supply); - -In this example we would use the following code :- - -regulator_set_supply("Regulator-2", "Regulator-1"); - -Relationships can be queried by calling :- - -const char *regulator_get_supply(const char *regulator); - - -3. Power Domain constraint setting. -=================================== -Each power domain within a system has physical constraints on voltage and -current. This must be defined in software so that the power domain is always -operated within specifications. - -Consider the following machine (again) :- - - Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] - | - +-> [Consumer B @ 3.3V] - -This gives us two regulators and two power domains: - - Domain 1: Regulator-2, Consumer B. - Domain 2: Consumer A. - -Constraints can be registered by calling :- - -int regulator_set_platform_constraints(const char *regulator, - struct regulation_constraints *constraints); - -The example is defined as follows :- - -struct regulation_constraints domain_1 = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, +supply (Regulator-2). The supply regulator is set by the supply_regulator_dev +field below:- + +static struct regulator_init_data regulator2_data = { + .supply_regulator_dev = &platform_regulator1_device.dev, + .constraints = { + .min_uV = 1800000, + .max_uV = 2000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + }, + .num_consumer_supplies = ARRAY_SIZE(regulator2_consumers), + .consumer_supplies = regulator2_consumers, }; -struct regulation_constraints domain_2 = { - .min_uV = 1800000, - .max_uV = 2000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, +Finally the regulator devices must be registered in the usual manner. + +static struct platform_device regulator_devices[] = { +{ + .name = "regulator", + .id = DCDC_1, + .dev = { + .platform_data = ®ulator1_data, + }, +}, +{ + .name = "regulator", + .id = DCDC_2, + .dev = { + .platform_data = ®ulator2_data, + }, +}, }; +/* register regulator 1 device */ +platform_device_register(&wm8350_regulator_devices[0]); -regulator_set_platform_constraints("Regulator-1", &domain_1); -regulator_set_platform_constraints("Regulator-2", &domain_2); +/* register regulator 2 device */ +platform_device_register(&wm8350_regulator_devices[1]); diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt index a6905014359..4200accb9bb 100644 --- a/Documentation/power/regulator/regulator.txt +++ b/Documentation/power/regulator/regulator.txt @@ -10,11 +10,11 @@ Registration Drivers can register a regulator by calling :- -struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, - void *reg_data); +struct regulator_dev *regulator_register(struct device *dev, + struct regulator_desc *regulator_desc); -This will register the regulators capabilities and operations the regulator -core. The core does not touch reg_data (private to regulator driver). +This will register the regulators capabilities and operations to the regulator +core. Regulators can be unregistered by calling :- diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c index 263699d6152..366565aba86 100644 --- a/drivers/regulator/bq24022.c +++ b/drivers/regulator/bq24022.c @@ -18,13 +18,13 @@ #include #include + static int bq24022_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "setting current limit to %s mA\n", + dev_dbg(rdev_get_dev(rdev), "setting current limit to %s mA\n", max_uA >= 500000 ? "500" : "100"); /* REVISIT: maybe return error if min_uA != 0 ? */ @@ -34,18 +34,16 @@ static int bq24022_set_current_limit(struct regulator_dev *rdev, static int bq24022_get_current_limit(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000; } static int bq24022_enable(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "enabling charger\n"); + dev_dbg(rdev_get_dev(rdev), "enabling charger\n"); gpio_set_value(pdata->gpio_nce, 0); return 0; @@ -53,10 +51,9 @@ static int bq24022_enable(struct regulator_dev *rdev) static int bq24022_disable(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "disabling charger\n"); + dev_dbg(rdev_get_dev(rdev), "disabling charger\n"); gpio_set_value(pdata->gpio_nce, 1); return 0; @@ -108,7 +105,7 @@ static int __init bq24022_probe(struct platform_device *pdev) ret = gpio_direction_output(pdata->gpio_iset2, 0); ret = gpio_direction_output(pdata->gpio_nce, 1); - bq24022 = regulator_register(&bq24022_desc, pdev); + bq24022 = regulator_register(&bq24022_desc, &pdev->dev, pdata); if (IS_ERR(bq24022)) { dev_dbg(&pdev->dev, "couldn't register regulator\n"); ret = PTR_ERR(bq24022); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9c798626156..84202eaace5 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2,8 +2,9 @@ * core.c -- Voltage/Current Regulator framework. * * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * Copyright 2008 SlimLogic Ltd. * - * Author: Liam Girdwood + * Author: Liam Girdwood * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -64,14 +65,9 @@ struct regulator_map { struct list_head list; struct device *dev; const char *supply; - const char *regulator; + struct regulator_dev *regulator; }; -static inline struct regulator_dev *to_rdev(struct device *d) -{ - return container_of(d, struct regulator_dev, dev); -} - /* * struct regulator * @@ -227,7 +223,7 @@ static ssize_t device_requested_uA_show(struct device *dev, static ssize_t regulator_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); ssize_t ret; mutex_lock(&rdev->mutex); @@ -240,7 +236,7 @@ static ssize_t regulator_uV_show(struct device *dev, static ssize_t regulator_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev)); } @@ -248,7 +244,7 @@ static ssize_t regulator_uA_show(struct device *dev, static ssize_t regulator_opmode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); int mode = _regulator_get_mode(rdev); switch (mode) { @@ -267,7 +263,7 @@ static ssize_t regulator_opmode_show(struct device *dev, static ssize_t regulator_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); int state = _regulator_is_enabled(rdev); if (state > 0) @@ -281,7 +277,7 @@ static ssize_t regulator_state_show(struct device *dev, static ssize_t regulator_min_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -292,7 +288,7 @@ static ssize_t regulator_min_uA_show(struct device *dev, static ssize_t regulator_max_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -303,7 +299,7 @@ static ssize_t regulator_max_uA_show(struct device *dev, static ssize_t regulator_min_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -314,7 +310,7 @@ static ssize_t regulator_min_uV_show(struct device *dev, static ssize_t regulator_max_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -325,7 +321,7 @@ static ssize_t regulator_max_uV_show(struct device *dev, static ssize_t regulator_total_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); struct regulator *regulator; int uA = 0; @@ -339,14 +335,14 @@ static ssize_t regulator_total_uA_show(struct device *dev, static ssize_t regulator_num_users_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); return sprintf(buf, "%d\n", rdev->use_count); } static ssize_t regulator_type_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); switch (rdev->desc->type) { case REGULATOR_VOLTAGE: @@ -360,7 +356,7 @@ static ssize_t regulator_type_show(struct device *dev, static ssize_t regulator_suspend_mem_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -370,7 +366,7 @@ static ssize_t regulator_suspend_mem_uV_show(struct device *dev, static ssize_t regulator_suspend_disk_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -380,7 +376,7 @@ static ssize_t regulator_suspend_disk_uV_show(struct device *dev, static ssize_t regulator_suspend_standby_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -406,7 +402,7 @@ static ssize_t suspend_opmode_show(struct regulator_dev *rdev, static ssize_t regulator_suspend_mem_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -417,7 +413,7 @@ static ssize_t regulator_suspend_mem_mode_show(struct device *dev, static ssize_t regulator_suspend_disk_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -428,7 +424,7 @@ static ssize_t regulator_suspend_disk_mode_show(struct device *dev, static ssize_t regulator_suspend_standby_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -439,7 +435,7 @@ static ssize_t regulator_suspend_standby_mode_show(struct device *dev, static ssize_t regulator_suspend_mem_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -453,7 +449,7 @@ static ssize_t regulator_suspend_mem_state_show(struct device *dev, static ssize_t regulator_suspend_disk_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -467,7 +463,7 @@ static ssize_t regulator_suspend_disk_state_show(struct device *dev, static ssize_t regulator_suspend_standby_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -512,7 +508,7 @@ static struct device_attribute regulator_dev_attrs[] = { static void regulator_dev_release(struct device *dev) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); kfree(rdev); } @@ -569,8 +565,11 @@ static int suspend_set_state(struct regulator_dev *rdev, /* enable & disable are mandatory for suspend control */ if (!rdev->desc->ops->set_suspend_enable || - !rdev->desc->ops->set_suspend_disable) + !rdev->desc->ops->set_suspend_disable) { + printk(KERN_ERR "%s: no way to set suspend state\n", + __func__); return -EINVAL; + } if (rstate->enabled) ret = rdev->desc->ops->set_suspend_enable(rdev); @@ -656,6 +655,125 @@ static void print_constraints(struct regulator_dev *rdev) printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf); } +/** + * set_machine_constraints - sets regulator constraints + * @regulator: regulator source + * + * Allows platform initialisation code to define and constrain + * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: + * Constraints *must* be set by platform code in order for some + * regulator operations to proceed i.e. set_voltage, set_current_limit, + * set_mode. + */ +static int set_machine_constraints(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + int ret = 0; + + rdev->constraints = constraints; + + /* do we need to apply the constraint voltage */ + if (rdev->constraints->apply_uV && + rdev->constraints->min_uV == rdev->constraints->max_uV && + rdev->desc->ops->set_voltage) { + ret = rdev->desc->ops->set_voltage(rdev, + rdev->constraints->min_uV, rdev->constraints->max_uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to apply %duV" + " constraint\n", __func__, + rdev->constraints->min_uV); + rdev->constraints = NULL; + goto out; + } + } + + /* are we enabled at boot time by firmware / bootloader */ + if (rdev->constraints->boot_on) + rdev->use_count = 1; + + /* do we need to setup our suspend state */ + if (constraints->initial_state) + ret = suspend_prepare(rdev, constraints->initial_state); + + print_constraints(rdev); +out: + return ret; +} + +/** + * set_supply - set regulator supply regulator + * @regulator: regulator name + * @supply: supply regulator name + * + * Called by platform initialisation code to set the supply regulator for this + * regulator. This ensures that a regulators supply will also be enabled by the + * core if it's child is enabled. + */ +static int set_supply(struct regulator_dev *rdev, + struct regulator_dev *supply_rdev) +{ + int err; + + err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj, + "supply"); + if (err) { + printk(KERN_ERR + "%s: could not add device link %s err %d\n", + __func__, supply_rdev->dev.kobj.name, err); + goto out; + } + rdev->supply = supply_rdev; + list_add(&rdev->slist, &supply_rdev->supply_list); +out: + return err; +} + +/** + * set_consumer_device_supply: Bind a regulator to a symbolic supply + * @regulator: regulator source + * @dev: device the supply applies to + * @supply: symbolic name for supply + * + * Allows platform initialisation code to map physical regulator + * sources to symbolic names for supplies for use by devices. Devices + * should use these symbolic names to request regulators, avoiding the + * need to provide board-specific regulator names as platform data. + */ +static int set_consumer_device_supply(struct regulator_dev *rdev, + struct device *consumer_dev, const char *supply) +{ + struct regulator_map *node; + + if (supply == NULL) + return -EINVAL; + + node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL); + if (node == NULL) + return -ENOMEM; + + node->regulator = rdev; + node->dev = consumer_dev; + node->supply = supply; + + list_add(&node->list, ®ulator_map_list); + return 0; +} + +static void unset_consumer_device_supply(struct regulator_dev *rdev, + struct device *consumer_dev) +{ + struct regulator_map *node, *n; + + list_for_each_entry_safe(node, n, ®ulator_map_list, list) { + if (rdev == node->regulator && + consumer_dev == node->dev) { + list_del(&node->list); + kfree(node); + return; + } + } +} + #define REG_STR_SIZE 32 static struct regulator *create_regulator(struct regulator_dev *rdev, @@ -746,7 +864,6 @@ struct regulator *regulator_get(struct device *dev, const char *id) struct regulator_dev *rdev; struct regulator_map *map; struct regulator *regulator = ERR_PTR(-ENODEV); - const char *supply = id; if (id == NULL) { printk(KERN_ERR "regulator: get() with no identifier\n"); @@ -758,15 +875,9 @@ struct regulator *regulator_get(struct device *dev, const char *id) list_for_each_entry(map, ®ulator_map_list, list) { if (dev == map->dev && strcmp(map->supply, id) == 0) { - supply = map->regulator; - break; - } - } - - list_for_each_entry(rdev, ®ulator_list, list) { - if (strcmp(supply, rdev->desc->name) == 0 && - try_module_get(rdev->owner)) + rdev = map->regulator; goto found; + } } printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n", id); @@ -774,12 +885,16 @@ struct regulator *regulator_get(struct device *dev, const char *id) return regulator; found: + if (!try_module_get(rdev->owner)) + goto out; + regulator = create_regulator(rdev, dev, id); if (regulator == NULL) { regulator = ERR_PTR(-ENOMEM); module_put(rdev->owner); } +out: mutex_unlock(®ulator_list_mutex); return regulator; } @@ -1559,11 +1674,12 @@ EXPORT_SYMBOL_GPL(regulator_notifier_call_chain); * Returns 0 on success. */ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, - void *reg_data) + struct device *dev, void *driver_data) { static atomic_t regulator_no = ATOMIC_INIT(0); struct regulator_dev *rdev; - int ret; + struct regulator_init_data *init_data = dev->platform_data; + int ret, i; if (regulator_desc == NULL) return ERR_PTR(-EINVAL); @@ -1582,7 +1698,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, mutex_lock(®ulator_list_mutex); mutex_init(&rdev->mutex); - rdev->reg_data = reg_data; + rdev->reg_data = driver_data; rdev->owner = regulator_desc->owner; rdev->desc = regulator_desc; INIT_LIST_HEAD(&rdev->consumer_list); @@ -1591,20 +1707,68 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, INIT_LIST_HEAD(&rdev->slist); BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); + /* preform any regulator specific init */ + if (init_data->regulator_init) { + ret = init_data->regulator_init(rdev->reg_data); + if (ret < 0) { + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + } + + /* set regulator constraints */ + ret = set_machine_constraints(rdev, &init_data->constraints); + if (ret < 0) { + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + + /* register with sysfs */ rdev->dev.class = ®ulator_class; - device_initialize(&rdev->dev); + rdev->dev.parent = dev; snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id), - "regulator_%ld_%s", - (unsigned long)atomic_inc_return(®ulator_no) - 1, - regulator_desc->name); - - ret = device_add(&rdev->dev); - if (ret == 0) - list_add(&rdev->list, ®ulator_list); - else { + "regulator.%d", atomic_inc_return(®ulator_no) - 1); + ret = device_register(&rdev->dev); + if (ret != 0) { kfree(rdev); rdev = ERR_PTR(ret); + goto out; + } + + dev_set_drvdata(&rdev->dev, rdev); + + /* set supply regulator if it exists */ + if (init_data->supply_regulator_dev) { + ret = set_supply(rdev, + dev_get_drvdata(init_data->supply_regulator_dev)); + if (ret < 0) { + device_unregister(&rdev->dev); + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + } + + /* add consumers devices */ + for (i = 0; i < init_data->num_consumer_supplies; i++) { + ret = set_consumer_device_supply(rdev, + init_data->consumer_supplies[i].dev, + init_data->consumer_supplies[i].supply); + if (ret < 0) { + for (--i; i >= 0; i--) + unset_consumer_device_supply(rdev, + init_data->consumer_supplies[i].dev); + device_unregister(&rdev->dev); + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } } + + list_add(&rdev->list, ®ulator_list); +out: mutex_unlock(®ulator_list_mutex); return rdev; } @@ -1630,187 +1794,6 @@ void regulator_unregister(struct regulator_dev *rdev) } EXPORT_SYMBOL_GPL(regulator_unregister); -/** - * regulator_set_supply - set regulator supply regulator - * @regulator: regulator name - * @supply: supply regulator name - * - * Called by platform initialisation code to set the supply regulator for this - * regulator. This ensures that a regulators supply will also be enabled by the - * core if it's child is enabled. - */ -int regulator_set_supply(const char *regulator, const char *supply) -{ - struct regulator_dev *rdev, *supply_rdev; - int err; - - if (regulator == NULL || supply == NULL) - return -EINVAL; - - mutex_lock(®ulator_list_mutex); - - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(rdev->desc->name, regulator)) - goto found_regulator; - } - mutex_unlock(®ulator_list_mutex); - return -ENODEV; - -found_regulator: - list_for_each_entry(supply_rdev, ®ulator_list, list) { - if (!strcmp(supply_rdev->desc->name, supply)) - goto found_supply; - } - mutex_unlock(®ulator_list_mutex); - return -ENODEV; - -found_supply: - err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj, - "supply"); - if (err) { - printk(KERN_ERR - "%s: could not add device link %s err %d\n", - __func__, supply_rdev->dev.kobj.name, err); - goto out; - } - rdev->supply = supply_rdev; - list_add(&rdev->slist, &supply_rdev->supply_list); -out: - mutex_unlock(®ulator_list_mutex); - return err; -} -EXPORT_SYMBOL_GPL(regulator_set_supply); - -/** - * regulator_get_supply - get regulator supply regulator - * @regulator: regulator name - * - * Returns the supply supply regulator name or NULL if no supply regulator - * exists (i.e the regulator is supplied directly from USB, Line, Battery, etc) - */ -const char *regulator_get_supply(const char *regulator) -{ - struct regulator_dev *rdev; - - if (regulator == NULL) - return NULL; - - mutex_lock(®ulator_list_mutex); - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(rdev->desc->name, regulator)) - goto found; - } - mutex_unlock(®ulator_list_mutex); - return NULL; - -found: - mutex_unlock(®ulator_list_mutex); - if (rdev->supply) - return rdev->supply->desc->name; - else - return NULL; -} -EXPORT_SYMBOL_GPL(regulator_get_supply); - -/** - * regulator_set_machine_constraints - sets regulator constraints - * @regulator: regulator source - * - * Allows platform initialisation code to define and constrain - * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: - * Constraints *must* be set by platform code in order for some - * regulator operations to proceed i.e. set_voltage, set_current_limit, - * set_mode. - */ -int regulator_set_machine_constraints(const char *regulator_name, - struct regulation_constraints *constraints) -{ - struct regulator_dev *rdev; - int ret = 0; - - if (regulator_name == NULL) - return -EINVAL; - - mutex_lock(®ulator_list_mutex); - - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(regulator_name, rdev->desc->name)) - goto found; - } - ret = -ENODEV; - goto out; - -found: - mutex_lock(&rdev->mutex); - rdev->constraints = constraints; - - /* do we need to apply the constraint voltage */ - if (rdev->constraints->apply_uV && - rdev->constraints->min_uV == rdev->constraints->max_uV && - rdev->desc->ops->set_voltage) { - ret = rdev->desc->ops->set_voltage(rdev, - rdev->constraints->min_uV, rdev->constraints->max_uV); - if (ret < 0) { - printk(KERN_ERR "%s: failed to apply %duV" - " constraint\n", __func__, - rdev->constraints->min_uV); - rdev->constraints = NULL; - goto out; - } - } - - /* are we enabled at boot time by firmware / bootloader */ - if (rdev->constraints->boot_on) - rdev->use_count = 1; - - /* do we need to setup our suspend state */ - if (constraints->initial_state) - ret = suspend_prepare(rdev, constraints->initial_state); - - print_constraints(rdev); - mutex_unlock(&rdev->mutex); - -out: - mutex_unlock(®ulator_list_mutex); - return ret; -} -EXPORT_SYMBOL_GPL(regulator_set_machine_constraints); - - -/** - * regulator_set_device_supply: Bind a regulator to a symbolic supply - * @regulator: regulator source - * @dev: device the supply applies to - * @supply: symbolic name for supply - * - * Allows platform initialisation code to map physical regulator - * sources to symbolic names for supplies for use by devices. Devices - * should use these symbolic names to request regulators, avoiding the - * need to provide board-specific regulator names as platform data. - */ -int regulator_set_device_supply(const char *regulator, struct device *dev, - const char *supply) -{ - struct regulator_map *node; - - if (regulator == NULL || supply == NULL) - return -EINVAL; - - node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL); - if (node == NULL) - return -ENOMEM; - - node->regulator = regulator; - node->dev = dev; - node->supply = supply; - - mutex_lock(®ulator_list_mutex); - list_add(&node->list, ®ulator_map_list); - mutex_unlock(®ulator_list_mutex); - return 0; -} -EXPORT_SYMBOL_GPL(regulator_set_device_supply); - /** * regulator_suspend_prepare: prepare regulators for system wide suspend * @state: system suspend state @@ -1893,6 +1876,18 @@ int rdev_get_id(struct regulator_dev *rdev) } EXPORT_SYMBOL_GPL(rdev_get_id); +struct device *rdev_get_dev(struct regulator_dev *rdev) +{ + return &rdev->dev; +} +EXPORT_SYMBOL_GPL(rdev_get_dev); + +void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data) +{ + return reg_init_data->driver_data; +} +EXPORT_SYMBOL_GPL(regulator_get_init_drvdata); + static int __init regulator_init(void) { printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 1d712c7172a..bc01b42a858 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -18,8 +18,8 @@ #include #include -struct regulator_constraints; struct regulator_dev; +struct regulator_init_data; /** * struct regulator_ops - regulator operations. @@ -85,15 +85,17 @@ struct regulator_desc { struct module *owner; }; - struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, - void *reg_data); + struct device *dev, void *driver_data); void regulator_unregister(struct regulator_dev *rdev); int regulator_notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data); void *rdev_get_drvdata(struct regulator_dev *rdev); +struct device *rdev_get_dev(struct regulator_dev *rdev); int rdev_get_id(struct regulator_dev *rdev); +void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); + #endif diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 11e737dbfcf..c6d69331a81 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -89,15 +89,33 @@ struct regulation_constraints { unsigned apply_uV:1; /* apply uV constraint iff min == max */ }; -int regulator_set_supply(const char *regulator, const char *regulator_supply); +/** + * struct regulator_consumer_supply - supply -> device mapping + * + * This maps a supply name to a device. + */ +struct regulator_consumer_supply { + struct device *dev; /* consumer */ + const char *supply; /* consumer supply - e.g. "vcc" */ +}; -const char *regulator_get_supply(const char *regulator); +/** + * struct regulator_init_data - regulator platform initialisation data. + * + * Initialisation constraints, our supply and consumers supplies. + */ +struct regulator_init_data { + struct device *supply_regulator_dev; /* or NULL for LINE */ -int regulator_set_machine_constraints(const char *regulator, - struct regulation_constraints *constraints); + struct regulation_constraints constraints; -int regulator_set_device_supply(const char *regulator, struct device *dev, - const char *supply); + int num_consumer_supplies; + struct regulator_consumer_supply *consumer_supplies; + + /* optional regulator machine specific init */ + int (*regulator_init)(void *driver_data); + void *driver_data; /* core does not touch this */ +}; int regulator_suspend_prepare(suspend_state_t state); -- cgit v1.2.3-70-g09d2 From 8a62ab4c4eaf5bce4d9cc84b77d6402c4742d9ab Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Sun, 14 Sep 2008 17:40:21 +0100 Subject: regulator: update email address for Liam Girdwood Additionally added another web resource for voltage regulators. Signed-off-by: Liam Girdwood --- Documentation/ABI/testing/sysfs-class-regulator | 42 ++++++++++++------------- MAINTAINERS | 3 +- 2 files changed, 23 insertions(+), 22 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator index 79a4a75b2d2..84e66fdad02 100644 --- a/Documentation/ABI/testing/sysfs-class-regulator +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -1,7 +1,7 @@ What: /sys/class/regulator/.../state Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called state. This holds the regulator output state. @@ -27,7 +27,7 @@ Description: What: /sys/class/regulator/.../type Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called type. This holds the regulator type. @@ -51,7 +51,7 @@ Description: What: /sys/class/regulator/.../microvolts Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called microvolts. This holds the regulator output voltage setting @@ -65,7 +65,7 @@ Description: What: /sys/class/regulator/.../microamps Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called microamps. This holds the regulator output current limit @@ -79,7 +79,7 @@ Description: What: /sys/class/regulator/.../opmode Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called opmode. This holds the regulator operating mode setting. @@ -102,7 +102,7 @@ Description: What: /sys/class/regulator/.../min_microvolts Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called min_microvolts. This holds the minimum safe working regulator @@ -116,7 +116,7 @@ Description: What: /sys/class/regulator/.../max_microvolts Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called max_microvolts. This holds the maximum safe working regulator @@ -130,7 +130,7 @@ Description: What: /sys/class/regulator/.../min_microamps Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called min_microamps. This holds the minimum safe working regulator @@ -145,7 +145,7 @@ Description: What: /sys/class/regulator/.../max_microamps Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called max_microamps. This holds the maximum safe working regulator @@ -160,7 +160,7 @@ Description: What: /sys/class/regulator/.../num_users Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called num_users. This holds the number of consumer devices that @@ -170,7 +170,7 @@ Description: What: /sys/class/regulator/.../requested_microamps Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called requested_microamps. This holds the total requested load @@ -181,7 +181,7 @@ Description: What: /sys/class/regulator/.../parent Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Some regulator directories will contain a link called parent. This points to the parent or supply regulator if one exists. @@ -189,7 +189,7 @@ Description: What: /sys/class/regulator/.../suspend_mem_microvolts Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called suspend_mem_microvolts. This holds the regulator output @@ -203,7 +203,7 @@ Description: What: /sys/class/regulator/.../suspend_disk_microvolts Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called suspend_disk_microvolts. This holds the regulator output @@ -217,7 +217,7 @@ Description: What: /sys/class/regulator/.../suspend_standby_microvolts Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called suspend_standby_microvolts. This holds the regulator output @@ -231,7 +231,7 @@ Description: What: /sys/class/regulator/.../suspend_mem_mode Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called suspend_mem_mode. This holds the regulator operating mode @@ -245,7 +245,7 @@ Description: What: /sys/class/regulator/.../suspend_disk_mode Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called suspend_disk_mode. This holds the regulator operating mode @@ -258,7 +258,7 @@ Description: What: /sys/class/regulator/.../suspend_standby_mode Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called suspend_standby_mode. This holds the regulator operating mode @@ -272,7 +272,7 @@ Description: What: /sys/class/regulator/.../suspend_mem_state Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called suspend_mem_state. This holds the regulator operating state @@ -287,7 +287,7 @@ Description: What: /sys/class/regulator/.../suspend_disk_state Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called suspend_disk_state. This holds the regulator operating state @@ -302,7 +302,7 @@ Description: What: /sys/class/regulator/.../suspend_standby_state Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood +Contact: Liam Girdwood Description: Each regulator directory will contain a field called suspend_standby_state. This holds the regulator operating diff --git a/MAINTAINERS b/MAINTAINERS index 74b80820531..3fa9ac680f0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4520,10 +4520,11 @@ S: Maintained VOLTAGE AND CURRENT REGULATOR FRAMEWORK P: Liam Girdwood -M: lg@opensource.wolfsonmicro.com +M: lrg@slimlogic.co.uk P: Mark Brown M: broonie@opensource.wolfsonmicro.com W: http://opensource.wolfsonmicro.com/node/15 +W: http://www.slimlogic.co.uk/?page_id=5 T: git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git S: Supported -- cgit v1.2.3-70-g09d2 From bc558a60b58f638ee0188affb627d4894a97b1c7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 10 Oct 2008 15:33:20 +0100 Subject: regulator: Export regulator name via sysfs Provide a new file 'name' in the regulator sysfs class with a human readable name for the regulator for use in applications. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- Documentation/ABI/testing/sysfs-class-regulator | 13 +++++++++++++ drivers/regulator/core.c | 18 ++++++++++++++++++ 2 files changed, 31 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator index 84e66fdad02..3731f6f29bc 100644 --- a/Documentation/ABI/testing/sysfs-class-regulator +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -157,6 +157,19 @@ Description: platform code. +What: /sys/class/regulator/.../name +Date: October 2008 +KernelVersion: 2.6.28 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + name. This holds a string identifying the regulator for + display purposes. + + NOTE: this will be empty if no suitable name is provided + by platform or regulator drivers. + + What: /sys/class/regulator/.../num_users Date: April 2008 KernelVersion: 2.6.26 diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9a6757decd3..02a774424e8 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -241,6 +241,22 @@ static ssize_t regulator_uA_show(struct device *dev, return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev)); } +static ssize_t regulator_name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + const char *name; + + if (rdev->constraints->name) + name = rdev->constraints->name; + else if (rdev->desc->name) + name = rdev->desc->name; + else + name = ""; + + return sprintf(buf, "%s\n", name); +} + static ssize_t regulator_opmode_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -473,7 +489,9 @@ static ssize_t regulator_suspend_standby_state_show(struct device *dev, else return sprintf(buf, "disabled\n"); } + static struct device_attribute regulator_dev_attrs[] = { + __ATTR(name, 0444, regulator_name_show, NULL), __ATTR(microvolts, 0444, regulator_uV_show, NULL), __ATTR(microamps, 0444, regulator_uA_show, NULL), __ATTR(opmode, 0444, regulator_opmode_show, NULL), -- cgit v1.2.3-70-g09d2 From 12462f1d9f0b96389497438dc2730c6f7410be82 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Wed, 3 Sep 2008 20:03:40 -0700 Subject: ocfs2: Add the 'inode64' mount option. Now that ocfs2 limits inode numbers to 32bits, add a mount option to disable the limit. This parallels XFS. 64bit systems can handle the larger inode numbers. [ Added description of inode64 mount option in ocfs2.txt. --Mark ] Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- Documentation/filesystems/ocfs2.txt | 4 ++++ fs/ocfs2/ocfs2.h | 1 + fs/ocfs2/suballoc.c | 5 +++-- fs/ocfs2/super.c | 17 +++++++++++++++++ 4 files changed, 25 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index c318a8bbb1e..6acf1b4f246 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -76,3 +76,7 @@ localalloc=8(*) Allows custom localalloc size in MB. If the value is too large, the fs will silently revert it to the default. Localalloc is not enabled for local mounts. localflocks This disables cluster aware flock. +inode64 Indicates that Ocfs2 is allowed to create inodes at + any location in the filesystem, including those which + will result in inode numbers occupying more than 32 + bits of significance. diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 6d3c10ddf48..78ae4f87e6b 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -189,6 +189,7 @@ enum ocfs2_mount_options OCFS2_MOUNT_DATA_WRITEBACK = 1 << 4, /* No data ordering */ OCFS2_MOUNT_LOCALFLOCKS = 1 << 5, /* No cluster aware user file locks */ OCFS2_MOUNT_NOUSERXATTR = 1 << 6, /* No user xattr */ + OCFS2_MOUNT_INODE64 = 1 << 7, /* Allow inode numbers > 2^32 */ }; #define OCFS2_OSB_SOFT_RO 0x0001 diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index 213bdca16fe..d7a6f928c31 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -601,9 +601,10 @@ int ocfs2_reserve_new_inode(struct ocfs2_super *osb, /* * stat(2) can't handle i_ino > 32bits, so we tell the * lower levels not to allocate us a block group past that - * limit. + * limit. The 'inode64' mount option avoids this behavior. */ - (*ac)->ac_max_block = (u32)~0U; + if (!(osb->s_mount_opt & OCFS2_MOUNT_INODE64)) + (*ac)->ac_max_block = (u32)~0U; /* * slot is set when we successfully steal inode from other nodes. diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index c85e525950a..1a51c8c53be 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -157,6 +157,7 @@ enum { Opt_stack, Opt_user_xattr, Opt_nouser_xattr, + Opt_inode64, Opt_err, }; @@ -178,6 +179,7 @@ static const match_table_t tokens = { {Opt_stack, "cluster_stack=%s"}, {Opt_user_xattr, "user_xattr"}, {Opt_nouser_xattr, "nouser_xattr"}, + {Opt_inode64, "inode64"}, {Opt_err, NULL} }; @@ -411,6 +413,15 @@ static int ocfs2_remount(struct super_block *sb, int *flags, char *data) goto out; } + /* Probably don't want this on remount; it might + * mess with other nodes */ + if (!(osb->s_mount_opt & OCFS2_MOUNT_INODE64) && + (parsed_options.mount_opt & OCFS2_MOUNT_INODE64)) { + ret = -EINVAL; + mlog(ML_ERROR, "Cannot enable inode64 on remount\n"); + goto out; + } + /* We're going to/from readonly mode. */ if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY)) { /* Lock here so the check of HARD_RO and the potential @@ -930,6 +941,9 @@ static int ocfs2_parse_options(struct super_block *sb, OCFS2_STACK_LABEL_LEN); mopt->cluster_stack[OCFS2_STACK_LABEL_LEN] = '\0'; break; + case Opt_inode64: + mopt->mount_opt |= OCFS2_MOUNT_INODE64; + break; default: mlog(ML_ERROR, "Unrecognized mount option \"%s\" " @@ -994,6 +1008,9 @@ static int ocfs2_show_options(struct seq_file *s, struct vfsmount *mnt) seq_printf(s, ",cluster_stack=%.*s", OCFS2_STACK_LABEL_LEN, osb->osb_cluster_stack); + if (opts & OCFS2_MOUNT_INODE64) + seq_printf(s, ",inode64"); + return 0; } -- cgit v1.2.3-70-g09d2 From 696b55d768ea5ebf38a369da615f8c956750ab3f Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Tue, 7 Oct 2008 11:09:24 -0700 Subject: ocfs2: Documentation update for user_xattr / nouser_xattr mount options Signed-off-by: Mark Fasheh --- Documentation/filesystems/ocfs2.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 6acf1b4f246..4340cc82579 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -80,3 +80,5 @@ inode64 Indicates that Ocfs2 is allowed to create inodes at any location in the filesystem, including those which will result in inode numbers occupying more than 32 bits of significance. +user_xattr (*) Enables Extended User Attributes. +nouser_xattr Disables Extended User Attributes. -- cgit v1.2.3-70-g09d2 From b806a71a0e9dacb6763371561caa693c78b93d40 Mon Sep 17 00:00:00 2001 From: Rudolf Marek Date: Tue, 14 Oct 2008 17:30:03 +0200 Subject: i2c-viapro: Add VX800/VX820 support Thanks to new datasheets published on http://linux.via.com.tw we can now add support for VX800/VX820 chipsets. Signed-off-by: Rudolf Marek Signed-off-by: Jean Delvare --- Documentation/i2c/busses/i2c-viapro | 8 ++++++-- drivers/i2c/busses/Kconfig | 4 +++- drivers/i2c/busses/i2c-viapro.c | 4 ++++ 3 files changed, 13 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 1405fb69984..22efedf60c8 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -16,6 +16,9 @@ Supported adapters: * VIA Technologies, Inc. CX700 Datasheet: available on request and under NDA from VIA + * VIA Technologies, Inc. VX800/VX820 + Datasheet: available on http://linux.via.com.tw + Authors: Kyösti Mälkki , Mark D. Studebaker , @@ -49,6 +52,7 @@ Your lspci -n listing must show one of these : device 1106:3372 (VT8237S) device 1106:3287 (VT8251) device 1106:8324 (CX700) + device 1106:8353 (VX800/VX820) If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. @@ -57,5 +61,5 @@ Except for the oldest chips (VT82C596A/B, VT82C686A and most probably VT8231), this driver supports I2C block transactions. Such transactions are mainly useful to read from and write to EEPROMs. -The CX700 additionally appears to support SMBus PEC, although this driver -doesn't implement it yet. +The CX700/VX800/VX820 additionally appears to support SMBus PEC, although +this driver doesn't implement it yet. diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index e54b9fe4680..b32164cfbc4 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -209,7 +209,7 @@ config I2C_VIA will be called i2c-via. config I2C_VIAPRO - tristate "VIA VT82C596/82C686/82xx and CX700" + tristate "VIA VT82C596/82C686/82xx and CX700/VX800/VX820" depends on PCI help If you say yes to this option, support will be included for the VIA @@ -223,6 +223,8 @@ config I2C_VIAPRO VT8237R/A/S VT8251 CX700 + VX800 + VX820 This driver can also be built as a module. If so, the module will be called i2c-viapro. diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 862eb352a2d..1345da97b23 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -36,6 +36,7 @@ VT8237S 0x3372 yes VT8251 0x3287 yes CX700 0x8324 yes + VX800/VX820 0x8353 yes Note: we assume there can only be one device, with one SMBus interface. */ @@ -396,6 +397,7 @@ found: switch (pdev->device) { case PCI_DEVICE_ID_VIA_CX700: + case PCI_DEVICE_ID_VIA_VX800: case PCI_DEVICE_ID_VIA_8251: case PCI_DEVICE_ID_VIA_8237: case PCI_DEVICE_ID_VIA_8237A: @@ -459,6 +461,8 @@ static struct pci_device_id vt596_ids[] = { .driver_data = SMBBA3 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700), .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800), + .driver_data = SMBBA3 }, { 0, } }; -- cgit v1.2.3-70-g09d2 From fceb2d06800ddae53095f63843d85fcff4f701ac Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 14 Oct 2008 17:30:05 +0200 Subject: i2c: Improve dev-interface documentation * Clarify some points. * Point developers to i2c-tools instead of lm_sensors. * Fix coding style in code examples. Signed-off-by: Jean Delvare --- Documentation/i2c/dev-interface | 65 +++++++++++++++++++++++++---------------- 1 file changed, 40 insertions(+), 25 deletions(-) (limited to 'Documentation') diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface index 9dd79123ddd..689a79ea5ce 100644 --- a/Documentation/i2c/dev-interface +++ b/Documentation/i2c/dev-interface @@ -4,6 +4,10 @@ the /dev interface. You need to load module i2c-dev for this. Each registered i2c adapter gets a number, counting from 0. You can examine /sys/class/i2c-dev/ to see what number corresponds to which adapter. +Alternatively, you can run "i2cdetect -l" to obtain a formated list of all +i2c adapters present on your system at a given time. i2cdetect is part of +the i2c-tools package. + I2C device files are character device files with major device number 89 and a minor device number corresponding to the number assigned as explained above. They should be called "i2c-%d" (i2c-0, i2c-1, ..., @@ -17,30 +21,34 @@ So let's say you want to access an i2c adapter from a C program. The first thing to do is "#include ". Please note that there are two files named "i2c-dev.h" out there, one is distributed with the Linux kernel and is meant to be included from kernel -driver code, the other one is distributed with lm_sensors and is +driver code, the other one is distributed with i2c-tools and is meant to be included from user-space programs. You obviously want the second one here. Now, you have to decide which adapter you want to access. You should -inspect /sys/class/i2c-dev/ to decide this. Adapter numbers are assigned -somewhat dynamically, so you can not even assume /dev/i2c-0 is the -first adapter. +inspect /sys/class/i2c-dev/ or run "i2cdetect -l" to decide this. +Adapter numbers are assigned somewhat dynamically, so you can not +assume much about them. They can even change from one boot to the next. Next thing, open the device file, as follows: + int file; int adapter_nr = 2; /* probably dynamically determined */ char filename[20]; - sprintf(filename,"/dev/i2c-%d",adapter_nr); - if ((file = open(filename,O_RDWR)) < 0) { + snprintf(filename, 19, "/dev/i2c-%d", adapter_nr); + file = open(filename, O_RDWR); + if (file < 0) { /* ERROR HANDLING; you can check errno to see what went wrong */ exit(1); } When you have opened the device, you must specify with what device address you want to communicate: + int addr = 0x40; /* The I2C address */ - if (ioctl(file,I2C_SLAVE,addr) < 0) { + + if (ioctl(file, I2C_SLAVE, addr) < 0) { /* ERROR HANDLING; you can check errno to see what went wrong */ exit(1); } @@ -48,31 +56,41 @@ address you want to communicate: Well, you are all set up now. You can now use SMBus commands or plain I2C to communicate with your device. SMBus commands are preferred if the device supports them. Both are illustrated below. + __u8 register = 0x10; /* Device register to access */ __s32 res; char buf[10]; + /* Using SMBus commands */ - res = i2c_smbus_read_word_data(file,register); + res = i2c_smbus_read_word_data(file, register); if (res < 0) { /* ERROR HANDLING: i2c transaction failed */ } else { /* res contains the read word */ } + /* Using I2C Write, equivalent of - i2c_smbus_write_word_data(file,register,0x6543) */ + i2c_smbus_write_word_data(file, register, 0x6543) */ buf[0] = register; buf[1] = 0x43; buf[2] = 0x65; - if ( write(file,buf,3) != 3) { + if (write(file, buf, 3) ! =3) { /* ERROR HANDLING: i2c transaction failed */ } + /* Using I2C Read, equivalent of i2c_smbus_read_byte(file) */ - if (read(file,buf,1) != 1) { + if (read(file, buf, 1) != 1) { /* ERROR HANDLING: i2c transaction failed */ } else { /* buf[0] contains the read byte */ } +Note that only a subset of the I2C and SMBus protocols can be achieved by +the means of read() and write() calls. In particular, so-called combined +transactions (mixing read and write messages in the same transaction) +aren't supported. For this reason, this interface is almost never used by +user-space programs. + IMPORTANT: because of the use of inline functions, you *have* to use '-O' or some variation when you compile your program! @@ -80,31 +98,29 @@ IMPORTANT: because of the use of inline functions, you *have* to use Full interface description ========================== -The following IOCTLs are defined and fully supported -(see also i2c-dev.h): +The following IOCTLs are defined: -ioctl(file,I2C_SLAVE,long addr) +ioctl(file, I2C_SLAVE, long addr) Change slave address. The address is passed in the 7 lower bits of the argument (except for 10 bit addresses, passed in the 10 lower bits in this case). -ioctl(file,I2C_TENBIT,long select) +ioctl(file, I2C_TENBIT, long select) Selects ten bit addresses if select not equals 0, selects normal 7 bit addresses if select equals 0. Default 0. This request is only valid if the adapter has I2C_FUNC_10BIT_ADDR. -ioctl(file,I2C_PEC,long select) +ioctl(file, I2C_PEC, long select) Selects SMBus PEC (packet error checking) generation and verification if select not equals 0, disables if select equals 0. Default 0. Used only for SMBus transactions. This request only has an effect if the the adapter has I2C_FUNC_SMBUS_PEC; it is still safe if not, it just doesn't have any effect. -ioctl(file,I2C_FUNCS,unsigned long *funcs) +ioctl(file, I2C_FUNCS, unsigned long *funcs) Gets the adapter functionality and puts it in *funcs. -ioctl(file,I2C_RDWR,struct i2c_rdwr_ioctl_data *msgset) - +ioctl(file, I2C_RDWR, struct i2c_rdwr_ioctl_data *msgset) Do combined read/write transaction without stop in between. Only valid if the adapter has I2C_FUNC_I2C. The argument is a pointer to a @@ -120,10 +136,9 @@ ioctl(file,I2C_RDWR,struct i2c_rdwr_ioctl_data *msgset) The slave address and whether to use ten bit address mode has to be set in each message, overriding the values set with the above ioctl's. - -Other values are NOT supported at this moment, except for I2C_SMBUS, -which you should never directly call; instead, use the access functions -below. +ioctl(file, I2C_SMBUS, struct i2c_smbus_ioctl_data *args) + Not meant to be called directly; instead, use the access functions + below. You can do plain i2c transactions by using read(2) and write(2) calls. You do not need to pass the address byte; instead, set it through @@ -148,7 +163,7 @@ what happened. The 'write' transactions return 0 on success; the returns the number of values read. The block buffers need not be longer than 32 bytes. -The above functions are all macros, that resolve to calls to the -i2c_smbus_access function, that on its turn calls a specific ioctl +The above functions are all inline functions, that resolve to calls to +the i2c_smbus_access function, that on its turn calls a specific ioctl with the data in a specific format. Read the source code if you want to know what happens behind the screens. -- cgit v1.2.3-70-g09d2 From 7c15fd1249658e203b2ac8661e48da6c2102e563 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 14 Oct 2008 17:30:05 +0200 Subject: i2c: Document the implementation details of the /dev interface I wrote this explanation to answer a question on the i2c mailing list, and thought it would be good to have in the kernel documentation. Signed-off-by: Jean Delvare --- Documentation/i2c/dev-interface | 45 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'Documentation') diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface index 689a79ea5ce..3e742ba2553 100644 --- a/Documentation/i2c/dev-interface +++ b/Documentation/i2c/dev-interface @@ -167,3 +167,48 @@ The above functions are all inline functions, that resolve to calls to the i2c_smbus_access function, that on its turn calls a specific ioctl with the data in a specific format. Read the source code if you want to know what happens behind the screens. + + +Implementation details +====================== + +For the interested, here's the code flow which happens inside the kernel +when you use the /dev interface to I2C: + +1* Your program opens /dev/i2c-N and calls ioctl() on it, as described in +section "C example" above. + +2* These open() and ioctl() calls are handled by the i2c-dev kernel +driver: see i2c-dev.c:i2cdev_open() and i2c-dev.c:i2cdev_ioctl(), +respectively. You can think of i2c-dev as a generic I2C chip driver +that can be programmed from user-space. + +3* Some ioctl() calls are for administrative tasks and are handled by +i2c-dev directly. Examples include I2C_SLAVE (set the address of the +device you want to access) and I2C_PEC (enable or disable SMBus error +checking on future transactions.) + +4* Other ioctl() calls are converted to in-kernel function calls by +i2c-dev. Examples include I2C_FUNCS, which queries the I2C adapter +functionality using i2c.h:i2c_get_functionality(), and I2C_SMBUS, which +performs an SMBus transaction using i2c-core.c:i2c_smbus_xfer(). + +The i2c-dev driver is responsible for checking all the parameters that +come from user-space for validity. After this point, there is no +difference between these calls that came from user-space through i2c-dev +and calls that would have been performed by kernel I2C chip drivers +directly. This means that I2C bus drivers don't need to implement +anything special to support access from user-space. + +5* These i2c-core.c/i2c.h functions are wrappers to the actual +implementation of your I2C bus driver. Each adapter must declare +callback functions implementing these standard calls. +i2c.h:i2c_get_functionality() calls i2c_adapter.algo->functionality(), +while i2c-core.c:i2c_smbus_xfer() calls either +adapter.algo->smbus_xfer() if it is implemented, or if not, +i2c-core.c:i2c_smbus_xfer_emulated() which in turn calls +i2c_adapter.algo->master_xfer(). + +After your I2C bus driver has processed these requests, execution runs +up the call chain, with almost no processing done, except by i2c-dev to +package the returned data, if any, in suitable format for the ioctl. -- cgit v1.2.3-70-g09d2 From 596c88f4601e6245a15ea7619527674abbfdcf92 Mon Sep 17 00:00:00 2001 From: Prakash Mortha Date: Tue, 14 Oct 2008 17:30:06 +0200 Subject: i2c: Restore i2c_smbus_process_call function Restore the i2c_smbus_process_call() as one driver (for the Micronas MAP5401) will need it soon. [JD: Update documentation accordingly.] Signed-off-by: Prakash Mortha Signed-off-by: Jean Delvare --- Documentation/i2c/smbus-protocol | 4 ++-- Documentation/i2c/writing-clients | 4 ++-- drivers/i2c/i2c-core.c | 22 ++++++++++++++++++++++ 3 files changed, 26 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol index 24bfb65da17..9df47441f0e 100644 --- a/Documentation/i2c/smbus-protocol +++ b/Documentation/i2c/smbus-protocol @@ -109,8 +109,8 @@ specified through the Comm byte. S Addr Wr [A] Comm [A] DataLow [A] DataHigh [A] P -SMBus Process Call -================== +SMBus Process Call: i2c_smbus_process_call() +============================================= This command selects a device register (through the Comm byte), sends 16 bits of data to it, and reads 16 bits of data in return. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 6b61b3a2e90..d73ee117a8c 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -606,6 +606,8 @@ SMBus communication extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command); extern s32 i2c_smbus_write_word_data(struct i2c_client * client, u8 command, u16 value); + extern s32 i2c_smbus_process_call(struct i2c_client *client, + u8 command, u16 value); extern s32 i2c_smbus_read_block_data(struct i2c_client * client, u8 command, u8 *values); extern s32 i2c_smbus_write_block_data(struct i2c_client * client, @@ -621,8 +623,6 @@ These ones were removed from i2c-core because they had no users, but could be added back later if needed: extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); - extern s32 i2c_smbus_process_call(struct i2c_client * client, - u8 command, u16 value); extern s32 i2c_smbus_block_process_call(struct i2c_client *client, u8 command, u8 length, u8 *values) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 80ae12048e8..42e852d79ff 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1687,6 +1687,28 @@ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value) } EXPORT_SYMBOL(i2c_smbus_write_word_data); +/** + * i2c_smbus_process_call - SMBus "process call" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: 16-bit "word" being written + * + * This executes the SMBus "process call" protocol, returning negative errno + * else a 16-bit unsigned "word" received from the device. + */ +s32 i2c_smbus_process_call(struct i2c_client *client, u8 command, u16 value) +{ + union i2c_smbus_data data; + int status; + data.word = value; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_PROC_CALL, &data); + return (status < 0) ? status : data.word; +} +EXPORT_SYMBOL(i2c_smbus_process_call); + /** * i2c_smbus_read_block_data - SMBus "block read" protocol * @client: Handle to slave device -- cgit v1.2.3-70-g09d2 From 3497b2f274b62292df67b6321d8947e24fce94a9 Mon Sep 17 00:00:00 2001 From: Randy Macleod Date: Tue, 14 Oct 2008 13:49:38 -0700 Subject: Phonet: Simple doc fix. From: "Randy Macleod" Signed-off-by: David S. Miller --- Documentation/networking/phonet.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt index 0e6e592f4f5..6a07e45d4a9 100644 --- a/Documentation/networking/phonet.txt +++ b/Documentation/networking/phonet.txt @@ -146,8 +146,8 @@ WARNING: When polling a connected pipe socket for writability, there is an intrinsic race condition whereby writability might be lost between the polling and the writing system calls. In this case, the socket will -block until write because possible again, unless non-blocking mode -becomes enabled. +block until write becomes possible again, unless non-blocking mode +is enabled. The pipe protocol provides two socket options at the SOL_PNPIPE level: -- cgit v1.2.3-70-g09d2 From 02ae9a1a8bc1d08a8fd5f6a0b8bde400b0f891b9 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 16 May 2008 11:49:22 +0200 Subject: HID: add compat support Add compat option to hid code to allow loading of all modules on systems which don't allow autoloading because of old userspace. Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina --- Documentation/feature-removal-schedule.txt | 7 +++++++ drivers/hid/Kconfig | 12 ++++++++++++ drivers/hid/Makefile | 4 ++++ drivers/hid/hid-apple.c | 2 ++ drivers/hid/hid-core.c | 12 ++++++++++++ drivers/hid/hid-dummy.c | 18 ++++++++++++++++++ drivers/hid/hid-logitech.c | 2 ++ include/linux/hid.h | 17 +++++++++++++++-- 8 files changed, 72 insertions(+), 2 deletions(-) create mode 100644 drivers/hid/hid-dummy.c (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index cc8093c15cf..4d2566a7d16 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -287,6 +287,13 @@ Who: Glauber Costa --------------------------- +What: remove HID compat support +When: 2.6.29 +Why: needed only as a temporary solution until distros fix themselves up +Who: Jiri Slaby + +--------------------------- + What: /sys/o2cb symlink When: January 2010 Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 41283fff514..d9d1a5671d9 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -70,6 +70,18 @@ source "drivers/hid/usbhid/Kconfig" menu "Special HID drivers" depends on HID +config HID_COMPAT + bool "Load all HID drivers on hid core load" + default y + ---help--- + Compatible option for older userspace. If you have system without udev + support of module loading through aliases and also old + module-init-tools which can't handle hid bus, choose Y here. Otherwise + say N. If you say N and your userspace is old enough, the only + functionality you loose is modules autoloading. + + If unsure, say Y. + config HID_APPLE tristate "Apple" default m diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 4a14821ceef..8e053eca474 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -8,6 +8,10 @@ obj-$(CONFIG_HID) += hid.o hid-$(CONFIG_HID_DEBUG) += hid-debug.o hid-$(CONFIG_HIDRAW) += hidraw.o +ifdef CONFIG_HID_COMPAT +obj-m += hid-dummy.o +endif + obj-$(CONFIG_HID_APPLE) += hid-apple.o obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 5642e2c685f..2a68661fcea 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -477,3 +477,5 @@ static void apple_exit(void) module_init(apple_init); module_exit(apple_exit); MODULE_LICENSE("GPL"); + +HID_COMPAT_LOAD_DRIVER(apple); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8e3c264c9b2..397e1b2ffe5 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1532,6 +1532,14 @@ void hid_unregister_driver(struct hid_driver *hdrv) } EXPORT_SYMBOL_GPL(hid_unregister_driver); +#ifdef CONFIG_HID_COMPAT +static void hid_compat_load(struct work_struct *ws) +{ + request_module("hid-dummy"); +} +static DECLARE_WORK(hid_compat_work, hid_compat_load); +#endif + static int __init hid_init(void) { int ret; @@ -1546,6 +1554,10 @@ static int __init hid_init(void) if (ret) goto err_bus; +#ifdef CONFIG_HID_COMPAT + schedule_work(&hid_compat_work); +#endif + return 0; err_bus: bus_unregister(&hid_bus_type); diff --git a/drivers/hid/hid-dummy.c b/drivers/hid/hid-dummy.c new file mode 100644 index 00000000000..b76c44efe1b --- /dev/null +++ b/drivers/hid/hid-dummy.c @@ -0,0 +1,18 @@ +#include +#include +#include + +static int __init hid_dummy_init(void) +{ +#ifdef CONFIG_HID_APPLE_MODULE + HID_COMPAT_CALL_DRIVER(apple); +#endif +#ifdef CONFIG_HID_LOGITECH_MODULE + HID_COMPAT_CALL_DRIVER(logitech); +#endif + + return -EIO; +} +module_init(hid_dummy_init); + +MODULE_LICENSE("GPL"); diff --git a/drivers/hid/hid-logitech.c b/drivers/hid/hid-logitech.c index 395e42ffb4d..b2aaebe1ac0 100644 --- a/drivers/hid/hid-logitech.c +++ b/drivers/hid/hid-logitech.c @@ -310,3 +310,5 @@ static void lg_exit(void) module_init(lg_init); module_exit(lg_exit); MODULE_LICENSE("GPL"); + +HID_COMPAT_LOAD_DRIVER(logitech); diff --git a/include/linux/hid.h b/include/linux/hid.h index 75cc1531dd8..60e44e6b86e 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -790,10 +790,23 @@ dbg_hid(const char *fmt, ...) return 0; } #define dbg_hid_line dbg_hid -#endif +#endif /* HID_DEBUG */ #define err_hid(format, arg...) printk(KERN_ERR "%s: " format "\n" , \ __FILE__ , ## arg) -#endif +#endif /* HID_FF */ + +#ifdef CONFIG_HID_COMPAT +#define HID_COMPAT_LOAD_DRIVER(name) \ +void hid_compat_##name(void) { } \ +EXPORT_SYMBOL(hid_compat_##name) +#else +#define HID_COMPAT_LOAD_DRIVER(name) +#endif /* HID_COMPAT */ +#define HID_COMPAT_CALL_DRIVER(name) do { \ + extern void hid_compat_##name(void); \ + hid_compat_##name(); \ +} while (0) + #endif -- cgit v1.2.3-70-g09d2 From 346e15beb5343c2eb8216d820f2ed8f150822b08 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Tue, 12 Aug 2008 16:46:19 -0400 Subject: driver core: basic infrastructure for per-module dynamic debug messages Base infrastructure to enable per-module debug messages. I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes control of debugging statements on a per-module basis in one /proc file, currently, /dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG, is not set, debugging statements can still be enabled as before, often by defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set. The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls can be dynamically enabled/disabled on a per-module basis. Future plans include extending this functionality to subsystems, that define their own debug levels and flags. Usage: Dynamic debugging is controlled by the debugfs file, /dynamic_printk/modules. This file contains a list of the modules that can be enabled. The format of the file is as follows: . . . : Name of the module in which the debug call resides : whether the messages are enabled or not For example: snd_hda_intel enabled=0 fixup enabled=1 driver enabled=0 Enable a module: $echo "set enabled=1 " > dynamic_printk/modules Disable a module: $echo "set enabled=0 " > dynamic_printk/modules Enable all modules: $echo "set enabled=1 all" > dynamic_printk/modules Disable all modules: $echo "set enabled=0 all" > dynamic_printk/modules Finally, passing "dynamic_printk" at the command line enables debugging for all modules. This mode can be turned off via the above disable command. [gkh: minor cleanups and tweaks to make the build work quietly] Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 5 + include/asm-generic/vmlinux.lds.h | 10 +- include/linux/device.h | 6 +- include/linux/dynamic_printk.h | 93 ++++++++ include/linux/kernel.h | 7 +- include/linux/module.h | 1 - kernel/module.c | 31 +++ lib/Kconfig.debug | 55 +++++ lib/Makefile | 2 + lib/dynamic_printk.c | 418 ++++++++++++++++++++++++++++++++++++ net/netfilter/nf_conntrack_pptp.c | 2 +- scripts/Makefile.lib | 11 +- scripts/basic/Makefile | 2 +- scripts/basic/hash.c | 64 ++++++ 14 files changed, 700 insertions(+), 7 deletions(-) create mode 100644 include/linux/dynamic_printk.h create mode 100644 lib/dynamic_printk.c create mode 100644 scripts/basic/hash.c (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2443f5bb436..b429c84ceef 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1713,6 +1713,11 @@ and is between 256 and 4096 characters. It is defined in the file autoconfiguration. Ranges are in pairs (memory base and size). + dynamic_printk + Enables pr_debug()/dev_dbg() calls if + CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled. These can also + be switched on/off via /dynamic_printk/modules + print-fatal-signals= [KNL] debug: print fatal signals print-fatal-signals=1: print segfault info to diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 7440a0dcedd..74c5faf26c0 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -268,7 +268,15 @@ CPU_DISCARD(init.data) \ CPU_DISCARD(init.rodata) \ MEM_DISCARD(init.data) \ - MEM_DISCARD(init.rodata) + MEM_DISCARD(init.rodata) \ + /* implement dynamic printk debug */ \ + VMLINUX_SYMBOL(__start___verbose_strings) = .; \ + *(__verbose_strings) \ + VMLINUX_SYMBOL(__stop___verbose_strings) = .; \ + . = ALIGN(8); \ + VMLINUX_SYMBOL(__start___verbose) = .; \ + *(__verbose) \ + VMLINUX_SYMBOL(__stop___verbose) = .; #define INIT_TEXT \ *(.init.text) \ diff --git a/include/linux/device.h b/include/linux/device.h index 60f6456691a..fb034461b39 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -550,7 +550,11 @@ extern const char *dev_driver_string(const struct device *dev); #define dev_info(dev, format, arg...) \ dev_printk(KERN_INFO , dev , format , ## arg) -#ifdef DEBUG +#if defined(CONFIG_DYNAMIC_PRINTK_DEBUG) +#define dev_dbg(dev, format, ...) do { \ + dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \ + } while (0) +#elif defined(DEBUG) #define dev_dbg(dev, format, arg...) \ dev_printk(KERN_DEBUG , dev , format , ## arg) #else diff --git a/include/linux/dynamic_printk.h b/include/linux/dynamic_printk.h new file mode 100644 index 00000000000..2d528d00907 --- /dev/null +++ b/include/linux/dynamic_printk.h @@ -0,0 +1,93 @@ +#ifndef _DYNAMIC_PRINTK_H +#define _DYNAMIC_PRINTK_H + +#define DYNAMIC_DEBUG_HASH_BITS 6 +#define DEBUG_HASH_TABLE_SIZE (1 << DYNAMIC_DEBUG_HASH_BITS) + +#define TYPE_BOOLEAN 1 + +#define DYNAMIC_ENABLED_ALL 0 +#define DYNAMIC_ENABLED_NONE 1 +#define DYNAMIC_ENABLED_SOME 2 + +extern int dynamic_enabled; + +/* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which + * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They + * use independent hash functions, to reduce the chance of false positives. + */ +extern long long dynamic_printk_enabled; +extern long long dynamic_printk_enabled2; + +struct mod_debug { + char *modname; + char *logical_modname; + char *flag_names; + int type; + int hash; + int hash2; +} __attribute__((aligned(8))); + +int register_dynamic_debug_module(char *mod_name, int type, char *share_name, + char *flags, int hash, int hash2); + +#if defined(CONFIG_DYNAMIC_PRINTK_DEBUG) +extern int unregister_dynamic_debug_module(char *mod_name); +extern int __dynamic_dbg_enabled_helper(char *modname, int type, + int value, int hash); + +#define __dynamic_dbg_enabled(module, type, value, level, hash) ({ \ + int __ret = 0; \ + if (unlikely((dynamic_printk_enabled & (1LL << DEBUG_HASH)) && \ + (dynamic_printk_enabled2 & (1LL << DEBUG_HASH2)))) \ + __ret = __dynamic_dbg_enabled_helper(module, type, \ + value, hash);\ + __ret; }) + +#define dynamic_pr_debug(fmt, ...) do { \ + static char mod_name[] \ + __attribute__((section("__verbose_strings"))) \ + = KBUILD_MODNAME; \ + static struct mod_debug descriptor \ + __used \ + __attribute__((section("__verbose"), aligned(8))) = \ + { mod_name, mod_name, NULL, TYPE_BOOLEAN, DEBUG_HASH, DEBUG_HASH2 };\ + if (__dynamic_dbg_enabled(KBUILD_MODNAME, TYPE_BOOLEAN, \ + 0, 0, DEBUG_HASH)) \ + printk(KERN_DEBUG KBUILD_MODNAME ":" fmt, \ + ##__VA_ARGS__); \ + } while (0) + +#define dynamic_dev_dbg(dev, format, ...) do { \ + static char mod_name[] \ + __attribute__((section("__verbose_strings"))) \ + = KBUILD_MODNAME; \ + static struct mod_debug descriptor \ + __used \ + __attribute__((section("__verbose"), aligned(8))) = \ + { mod_name, mod_name, NULL, TYPE_BOOLEAN, DEBUG_HASH, DEBUG_HASH2 };\ + if (__dynamic_dbg_enabled(KBUILD_MODNAME, TYPE_BOOLEAN, \ + 0, 0, DEBUG_HASH)) \ + dev_printk(KERN_DEBUG, dev, \ + KBUILD_MODNAME ": " format, \ + ##__VA_ARGS__); \ + } while (0) + +#else + +static inline int unregister_dynamic_debug_module(const char *mod_name) +{ + return 0; +} +static inline int __dynamic_dbg_enabled_helper(char *modname, int type, + int value, int hash) +{ + return 0; +} + +#define __dynamic_dbg_enabled(module, type, value, level, hash) ({ 0; }) +#define dynamic_pr_debug(fmt, ...) do { } while (0) +#define dynamic_dev_dbg(dev, format, ...) do { } while (0) +#endif + +#endif diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 75d81f157d2..ededb6e83b4 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -303,8 +304,12 @@ static inline char *pack_hex_byte(char *buf, u8 byte) #define pr_info(fmt, arg...) \ printk(KERN_INFO fmt, ##arg) -#ifdef DEBUG /* If you are writing a driver, please use dev_dbg instead */ +#if defined(CONFIG_DYNAMIC_PRINTK_DEBUG) +#define pr_debug(fmt, ...) do { \ + dynamic_pr_debug(fmt, ##__VA_ARGS__); \ + } while (0) +#elif defined(DEBUG) #define pr_debug(fmt, arg...) \ printk(KERN_DEBUG fmt, ##arg) #else diff --git a/include/linux/module.h b/include/linux/module.h index 68e09557c95..a41555cbe00 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -345,7 +345,6 @@ struct module /* Reference counts */ struct module_ref ref[NR_CPUS]; #endif - }; #ifndef MODULE_ARCH_INIT #define MODULE_ARCH_INIT {} diff --git a/kernel/module.c b/kernel/module.c index d5fcd24e5af..c5270066729 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -784,6 +784,7 @@ sys_delete_module(const char __user *name_user, unsigned int flags) mutex_lock(&module_mutex); /* Store the name of the last unloaded module for diagnostic purposes */ strlcpy(last_unloaded_module, mod->name, sizeof(last_unloaded_module)); + unregister_dynamic_debug_module(mod->name); free_module(mod); out: @@ -1783,6 +1784,33 @@ static inline void add_kallsyms(struct module *mod, } #endif /* CONFIG_KALLSYMS */ +#ifdef CONFIG_DYNAMIC_PRINTK_DEBUG +static void dynamic_printk_setup(Elf_Shdr *sechdrs, unsigned int verboseindex) +{ + struct mod_debug *debug_info; + unsigned long pos, end; + unsigned int num_verbose; + + pos = sechdrs[verboseindex].sh_addr; + num_verbose = sechdrs[verboseindex].sh_size / + sizeof(struct mod_debug); + end = pos + (num_verbose * sizeof(struct mod_debug)); + + for (; pos < end; pos += sizeof(struct mod_debug)) { + debug_info = (struct mod_debug *)pos; + register_dynamic_debug_module(debug_info->modname, + debug_info->type, debug_info->logical_modname, + debug_info->flag_names, debug_info->hash, + debug_info->hash2); + } +} +#else +static inline void dynamic_printk_setup(Elf_Shdr *sechdrs, + unsigned int verboseindex) +{ +} +#endif /* CONFIG_DYNAMIC_PRINTK_DEBUG */ + static void *module_alloc_update_bounds(unsigned long size) { void *ret = module_alloc(size); @@ -1831,6 +1859,7 @@ static noinline struct module *load_module(void __user *umod, #endif unsigned int markersindex; unsigned int markersstringsindex; + unsigned int verboseindex; struct module *mod; long err = 0; void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */ @@ -2117,6 +2146,7 @@ static noinline struct module *load_module(void __user *umod, markersindex = find_sec(hdr, sechdrs, secstrings, "__markers"); markersstringsindex = find_sec(hdr, sechdrs, secstrings, "__markers_strings"); + verboseindex = find_sec(hdr, sechdrs, secstrings, "__verbose"); /* Now do relocations. */ for (i = 1; i < hdr->e_shnum; i++) { @@ -2167,6 +2197,7 @@ static noinline struct module *load_module(void __user *umod, marker_update_probe_range(mod->markers, mod->markers + mod->num_markers); #endif + dynamic_printk_setup(sechdrs, verboseindex); err = module_finalize(hdr, sechdrs, mod); if (err < 0) goto cleanup; diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index aa81d284844..31d784dd80d 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -807,6 +807,61 @@ menuconfig BUILD_DOCSRC Say N if you are unsure. +config DYNAMIC_PRINTK_DEBUG + bool "Enable dynamic printk() call support" + default n + depends on PRINTK + select PRINTK_DEBUG + help + + Compiles debug level messages into the kernel, which would not + otherwise be available at runtime. These messages can then be + enabled/disabled on a per module basis. This mechanism implicitly + enables all pr_debug() and dev_dbg() calls. The impact of this + compile option is a larger kernel text size of about 2%. + + Usage: + + Dynamic debugging is controlled by the debugfs file, + dynamic_printk/modules. This file contains a list of the modules that + can be enabled. The format of the file is the module name, followed + by a set of flags that can be enabled. The first flag is always the + 'enabled' flag. For example: + + + . + . + . + + : Name of the module in which the debug call resides + : whether the messages are enabled or not + + From a live system: + + snd_hda_intel enabled=0 + fixup enabled=0 + driver enabled=0 + + Enable a module: + + $echo "set enabled=1 " > dynamic_printk/modules + + Disable a module: + + $echo "set enabled=0 " > dynamic_printk/modules + + Enable all modules: + + $echo "set enabled=1 all" > dynamic_printk/modules + + Disable all modules: + + $echo "set enabled=0 all" > dynamic_printk/modules + + Finally, passing "dynamic_printk" at the command line enables + debugging for all modules. This mode can be turned off via the above + disable command. + source "samples/Kconfig" source "lib/Kconfig.kgdb" diff --git a/lib/Makefile b/lib/Makefile index 44001af76a7..16feaab057b 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -81,6 +81,8 @@ obj-$(CONFIG_HAVE_LMB) += lmb.o obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o +obj-$(CONFIG_DYNAMIC_PRINTK_DEBUG) += dynamic_printk.o + hostprogs-y := gen_crc32table clean-files := crc32table.h diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c new file mode 100644 index 00000000000..d640f87bdc9 --- /dev/null +++ b/lib/dynamic_printk.c @@ -0,0 +1,418 @@ +/* + * lib/dynamic_printk.c + * + * make pr_debug()/dev_dbg() calls runtime configurable based upon their + * their source module. + * + * Copyright (C) 2008 Red Hat, Inc., Jason Baron + */ + +#include +#include +#include +#include +#include +#include + +extern struct mod_debug __start___verbose[]; +extern struct mod_debug __stop___verbose[]; + +struct debug_name { + struct hlist_node hlist; + struct hlist_node hlist2; + int hash1; + int hash2; + char *name; + int enable; + int type; +}; + +static int nr_entries; +static int num_enabled; +int dynamic_enabled = DYNAMIC_ENABLED_NONE; +static struct hlist_head module_table[DEBUG_HASH_TABLE_SIZE] = + { [0 ... DEBUG_HASH_TABLE_SIZE-1] = HLIST_HEAD_INIT }; +static struct hlist_head module_table2[DEBUG_HASH_TABLE_SIZE] = + { [0 ... DEBUG_HASH_TABLE_SIZE-1] = HLIST_HEAD_INIT }; +static DECLARE_MUTEX(debug_list_mutex); + +/* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which + * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They + * use independent hash functions, to reduce the chance of false positives. + */ +long long dynamic_printk_enabled; +EXPORT_SYMBOL_GPL(dynamic_printk_enabled); +long long dynamic_printk_enabled2; +EXPORT_SYMBOL_GPL(dynamic_printk_enabled2); + +/* returns the debug module pointer. */ +static struct debug_name *find_debug_module(char *module_name) +{ + int i; + struct hlist_head *head; + struct hlist_node *node; + struct debug_name *element; + + element = NULL; + for (i = 0; i < DEBUG_HASH_TABLE_SIZE; i++) { + head = &module_table[i]; + hlist_for_each_entry_rcu(element, node, head, hlist) + if (!strcmp(element->name, module_name)) + return element; + } + return NULL; +} + +/* returns the debug module pointer. */ +static struct debug_name *find_debug_module_hash(char *module_name, int hash) +{ + struct hlist_head *head; + struct hlist_node *node; + struct debug_name *element; + + element = NULL; + head = &module_table[hash]; + hlist_for_each_entry_rcu(element, node, head, hlist) + if (!strcmp(element->name, module_name)) + return element; + return NULL; +} + +/* caller must hold mutex*/ +static int __add_debug_module(char *mod_name, int hash, int hash2) +{ + struct debug_name *new; + char *module_name; + int ret = 0; + + if (find_debug_module(mod_name)) { + ret = -EINVAL; + goto out; + } + module_name = kmalloc(strlen(mod_name) + 1, GFP_KERNEL); + if (!module_name) { + ret = -ENOMEM; + goto out; + } + module_name = strcpy(module_name, mod_name); + module_name[strlen(mod_name)] = '\0'; + new = kzalloc(sizeof(struct debug_name), GFP_KERNEL); + if (!new) { + kfree(module_name); + ret = -ENOMEM; + goto out; + } + INIT_HLIST_NODE(&new->hlist); + INIT_HLIST_NODE(&new->hlist2); + new->name = module_name; + new->hash1 = hash; + new->hash2 = hash2; + hlist_add_head_rcu(&new->hlist, &module_table[hash]); + hlist_add_head_rcu(&new->hlist2, &module_table2[hash2]); + nr_entries++; +out: + return ret; +} + +int unregister_dynamic_debug_module(char *mod_name) +{ + struct debug_name *element; + int ret = 0; + + down(&debug_list_mutex); + element = find_debug_module(mod_name); + if (!element) { + ret = -EINVAL; + goto out; + } + hlist_del_rcu(&element->hlist); + hlist_del_rcu(&element->hlist2); + synchronize_rcu(); + kfree(element->name); + if (element->enable) + num_enabled--; + kfree(element); + nr_entries--; +out: + up(&debug_list_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module); + +int register_dynamic_debug_module(char *mod_name, int type, char *share_name, + char *flags, int hash, int hash2) +{ + struct debug_name *elem; + int ret = 0; + + down(&debug_list_mutex); + elem = find_debug_module(mod_name); + if (!elem) { + if (__add_debug_module(mod_name, hash, hash2)) + goto out; + elem = find_debug_module(mod_name); + if (dynamic_enabled == DYNAMIC_ENABLED_ALL && + !strcmp(mod_name, share_name)) { + elem->enable = true; + num_enabled++; + } + } + elem->type |= type; +out: + up(&debug_list_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(register_dynamic_debug_module); + +int __dynamic_dbg_enabled_helper(char *mod_name, int type, int value, int hash) +{ + struct debug_name *elem; + int ret = 0; + + if (dynamic_enabled == DYNAMIC_ENABLED_ALL) + return 1; + rcu_read_lock(); + elem = find_debug_module_hash(mod_name, hash); + if (elem && elem->enable) + ret = 1; + rcu_read_unlock(); + return ret; +} +EXPORT_SYMBOL_GPL(__dynamic_dbg_enabled_helper); + +static void set_all(bool enable) +{ + struct debug_name *e; + struct hlist_node *node; + int i; + long long enable_mask; + + for (i = 0; i < DEBUG_HASH_TABLE_SIZE; i++) { + if (module_table[i].first != NULL) { + hlist_for_each_entry(e, node, &module_table[i], hlist) { + e->enable = enable; + } + } + } + if (enable) + enable_mask = ULLONG_MAX; + else + enable_mask = 0; + dynamic_printk_enabled = enable_mask; + dynamic_printk_enabled2 = enable_mask; +} + +static int disabled_hash(int i, bool first_table) +{ + struct debug_name *e; + struct hlist_node *node; + + if (first_table) { + hlist_for_each_entry(e, node, &module_table[i], hlist) { + if (e->enable) + return 0; + } + } else { + hlist_for_each_entry(e, node, &module_table2[i], hlist2) { + if (e->enable) + return 0; + } + } + return 1; +} + +static ssize_t pr_debug_write(struct file *file, const char __user *buf, + size_t length, loff_t *ppos) +{ + char *buffer, *s, *value_str, *setting_str; + int err, value; + struct debug_name *elem = NULL; + int all = 0; + + if (length > PAGE_SIZE || length < 0) + return -EINVAL; + + buffer = (char *)__get_free_page(GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + err = -EFAULT; + if (copy_from_user(buffer, buf, length)) + goto out; + + err = -EINVAL; + if (length < PAGE_SIZE) + buffer[length] = '\0'; + else if (buffer[PAGE_SIZE-1]) + goto out; + + err = -EINVAL; + down(&debug_list_mutex); + + if (strncmp("set", buffer, 3)) + goto out_up; + s = buffer + 3; + setting_str = strsep(&s, "="); + if (s == NULL) + goto out_up; + setting_str = strstrip(setting_str); + value_str = strsep(&s, " "); + if (s == NULL) + goto out_up; + s = strstrip(s); + if (!strncmp(s, "all", 3)) + all = 1; + else + elem = find_debug_module(s); + if (!strncmp(setting_str, "enable", 6)) { + value = !!simple_strtol(value_str, NULL, 10); + if (all) { + if (value) { + set_all(true); + num_enabled = nr_entries; + dynamic_enabled = DYNAMIC_ENABLED_ALL; + } else { + set_all(false); + num_enabled = 0; + dynamic_enabled = DYNAMIC_ENABLED_NONE; + } + err = 0; + } else { + if (elem) { + if (value && (elem->enable == 0)) { + dynamic_printk_enabled |= + (1LL << elem->hash1); + dynamic_printk_enabled2 |= + (1LL << elem->hash2); + elem->enable = 1; + num_enabled++; + dynamic_enabled = DYNAMIC_ENABLED_SOME; + err = 0; + printk(KERN_DEBUG + "debugging enabled for module %s", + elem->name); + } else if (!value && (elem->enable == 1)) { + elem->enable = 0; + num_enabled--; + if (disabled_hash(elem->hash1, true)) + dynamic_printk_enabled &= + ~(1LL << elem->hash1); + if (disabled_hash(elem->hash2, false)) + dynamic_printk_enabled2 &= + ~(1LL << elem->hash2); + if (num_enabled) + dynamic_enabled = + DYNAMIC_ENABLED_SOME; + else + dynamic_enabled = + DYNAMIC_ENABLED_NONE; + err = 0; + printk(KERN_DEBUG + "debugging disabled for module " + "%s", elem->name); + } + } + } + } + if (!err) + err = length; +out_up: + up(&debug_list_mutex); +out: + free_page((unsigned long)buffer); + return err; +} + +static void *pr_debug_seq_start(struct seq_file *f, loff_t *pos) +{ + return (*pos < DEBUG_HASH_TABLE_SIZE) ? pos : NULL; +} + +static void *pr_debug_seq_next(struct seq_file *s, void *v, loff_t *pos) +{ + (*pos)++; + if (*pos >= DEBUG_HASH_TABLE_SIZE) + return NULL; + return pos; +} + +static void pr_debug_seq_stop(struct seq_file *s, void *v) +{ + /* Nothing to do */ +} + +static int pr_debug_seq_show(struct seq_file *s, void *v) +{ + struct hlist_head *head; + struct hlist_node *node; + struct debug_name *elem; + unsigned int i = *(loff_t *) v; + + rcu_read_lock(); + head = &module_table[i]; + hlist_for_each_entry_rcu(elem, node, head, hlist) { + seq_printf(s, "%s enabled=%d", elem->name, elem->enable); + seq_printf(s, "\n"); + } + rcu_read_unlock(); + return 0; +} + +static struct seq_operations pr_debug_seq_ops = { + .start = pr_debug_seq_start, + .next = pr_debug_seq_next, + .stop = pr_debug_seq_stop, + .show = pr_debug_seq_show +}; + +static int pr_debug_open(struct inode *inode, struct file *filp) +{ + return seq_open(filp, &pr_debug_seq_ops); +} + +static const struct file_operations pr_debug_operations = { + .open = pr_debug_open, + .read = seq_read, + .write = pr_debug_write, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init dynamic_printk_init(void) +{ + struct dentry *dir, *file; + struct mod_debug *iter; + unsigned long value; + + dir = debugfs_create_dir("dynamic_printk", NULL); + if (!dir) + return -ENOMEM; + file = debugfs_create_file("modules", 0644, dir, NULL, + &pr_debug_operations); + if (!file) { + debugfs_remove(dir); + return -ENOMEM; + } + for (value = (unsigned long)__start___verbose; + value < (unsigned long)__stop___verbose; + value += sizeof(struct mod_debug)) { + iter = (struct mod_debug *)value; + register_dynamic_debug_module(iter->modname, + iter->type, + iter->logical_modname, + iter->flag_names, iter->hash, iter->hash2); + } + return 0; +} +module_init(dynamic_printk_init); +/* may want to move this earlier so we can get traces as early as possible */ + +static int __init dynamic_printk_setup(char *str) +{ + if (str) + return -ENOENT; + set_all(true); + return 0; +} +/* Use early_param(), so we can get debug output as early as possible */ +early_param("dynamic_printk", dynamic_printk_setup); diff --git a/net/netfilter/nf_conntrack_pptp.c b/net/netfilter/nf_conntrack_pptp.c index 373e51e91ce..1bc3001d182 100644 --- a/net/netfilter/nf_conntrack_pptp.c +++ b/net/netfilter/nf_conntrack_pptp.c @@ -65,7 +65,7 @@ void struct nf_conntrack_expect *exp) __read_mostly; EXPORT_SYMBOL_GPL(nf_nat_pptp_hook_expectfn); -#ifdef DEBUG +#if defined(DEBUG) || defined(CONFIG_DYNAMIC_PRINTK_DEBUG) /* PptpControlMessageType names */ const char *const pptp_msg_name[] = { "UNKNOWN_MESSAGE", diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index ea48b82a370..b4ca38a2115 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -96,6 +96,14 @@ basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" modname_flags = $(if $(filter 1,$(words $(modname))),\ -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") +#hash values +ifdef CONFIG_DYNAMIC_PRINTK_DEBUG +debug_flags = -D"DEBUG_HASH=$(shell ./scripts/basic/hash djb2 $(@D)$(modname))"\ + -D"DEBUG_HASH2=$(shell ./scripts/basic/hash r5 $(@D)$(modname))" +else +debug_flags = +endif + orig_c_flags = $(KBUILD_CFLAGS) $(ccflags-y) $(CFLAGS_$(basetarget).o) _c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags)) _a_flags = $(KBUILD_AFLAGS) $(asflags-y) $(AFLAGS_$(basetarget).o) @@ -121,7 +129,8 @@ endif c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(KBUILD_CPPFLAGS) \ $(__c_flags) $(modkern_cflags) \ - -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) + -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) \ + $(debug_flags) a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(KBUILD_CPPFLAGS) \ $(__a_flags) $(modkern_aflags) diff --git a/scripts/basic/Makefile b/scripts/basic/Makefile index 4c324a1f1e0..09559951df1 100644 --- a/scripts/basic/Makefile +++ b/scripts/basic/Makefile @@ -9,7 +9,7 @@ # fixdep: Used to generate dependency information during build process # docproc: Used in Documentation/DocBook -hostprogs-y := fixdep docproc +hostprogs-y := fixdep docproc hash always := $(hostprogs-y) # fixdep is needed to compile other host programs diff --git a/scripts/basic/hash.c b/scripts/basic/hash.c new file mode 100644 index 00000000000..3299ad7fc8c --- /dev/null +++ b/scripts/basic/hash.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2008 Red Hat, Inc., Jason Baron + * + */ + +#include +#include +#include + +#define DYNAMIC_DEBUG_HASH_BITS 6 + +static const char *program; + +static void usage(void) +{ + printf("Usage: %s \n", program); + exit(1); +} + +/* djb2 hashing algorithm by Dan Bernstein. From: + * http://www.cse.yorku.ca/~oz/hash.html + */ + +unsigned int djb2_hash(char *str) +{ + unsigned long hash = 5381; + int c; + + c = *str; + while (c) { + hash = ((hash << 5) + hash) + c; + c = *++str; + } + return (unsigned int)(hash & ((1 << DYNAMIC_DEBUG_HASH_BITS) - 1)); +} + +unsigned int r5_hash(char *str) +{ + unsigned long hash = 0; + int c; + + c = *str; + while (c) { + hash = (hash + (c << 4) + (c >> 4)) * 11; + c = *++str; + } + return (unsigned int)(hash & ((1 << DYNAMIC_DEBUG_HASH_BITS) - 1)); +} + +int main(int argc, char *argv[]) +{ + program = argv[0]; + + if (argc != 3) + usage(); + if (!strcmp(argv[1], "djb2")) + printf("%d\n", djb2_hash(argv[2])); + else if (!strcmp(argv[1], "r5")) + printf("%d\n", r5_hash(argv[2])); + else + usage(); + exit(0); +} + -- cgit v1.2.3-70-g09d2 From 030c1d2bfcc2187650fb975456ca0b61a5bb77f4 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Thu, 8 May 2008 14:41:00 -0700 Subject: kobject: Fix kobject_rename and !CONFIG_SYSFS When looking at kobject_rename I found two bugs with that exist when sysfs support is disabled in the kernel. kobject_rename does not change the name on the kobject when sysfs support is not compiled in. kobject_rename without locking attempts to check the validity of a rename operation, which the kobject layer simply does not have the infrastructure to do. This patch documents the previously unstated requirement of kobject_rename that is the responsibility of the caller to provide mutual exclusion and to be certain that the new_name for the kobject is valid. This patch modifies sysfs_rename_dir in !CONFIG_SYSFS case to call kobject_set_name to actually change the kobject_name. This patch removes the bogus and misleading check in kobject_rename that attempts to see if a rename is valid. The check is bogus because we do not have the proper locking. The check is misleading because it looks like we can and do perform checking at the kobject level that we don't. Signed-off-by: Eric W. Biederman Signed-off-by: Greg Kroah-Hartman --- Documentation/kobject.txt | 4 ++++ drivers/base/core.c | 5 +++++ include/linux/sysfs.h | 4 +++- lib/kobject.c | 18 +++++------------- 4 files changed, 17 insertions(+), 14 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index 51a8021ee53..f5d2aad65a6 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -118,6 +118,10 @@ the name of the kobject, call kobject_rename(): int kobject_rename(struct kobject *kobj, const char *new_name); +Note kobject_rename does perform any locking or have a solid notion of +what names are valid so the provide must provide their own sanity checking +and serialization. + There is a function called kobject_set_name() but that is legacy cruft and is being removed. If your code needs to call this function, it is incorrect and needs to be fixed. diff --git a/drivers/base/core.c b/drivers/base/core.c index 9649d1c422a..8c2cc2648f5 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1327,6 +1327,11 @@ EXPORT_SYMBOL_GPL(device_destroy); * device_rename - renames a device * @dev: the pointer to the struct device to be renamed * @new_name: the new name of the device + * + * It is the responsibility of the caller to provide mutual + * exclusion between two different calls of device_rename + * on the same device to ensure that new_name is valid and + * won't conflict with other devices. */ int device_rename(struct device *dev, char *new_name) { diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index b330e289d71..39924a96220 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -20,6 +20,8 @@ struct kobject; struct module; +extern int kobject_set_name(struct kobject *kobj, const char *name, ...) + __attribute__((format(printf, 2, 3))); /* FIXME * The *owner field is no longer used, but leave around * until the tree gets cleaned up fully. @@ -147,7 +149,7 @@ static inline void sysfs_remove_dir(struct kobject *kobj) static inline int sysfs_rename_dir(struct kobject *kobj, const char *new_name) { - return 0; + return kobject_set_name(kobj, "%s", new_name); } static inline int sysfs_move_dir(struct kobject *kobj, diff --git a/lib/kobject.c b/lib/kobject.c index fbf0ae28237..ae6bb900bfb 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -387,6 +387,11 @@ EXPORT_SYMBOL_GPL(kobject_init_and_add); * kobject_rename - change the name of an object * @kobj: object in question. * @new_name: object's new name + * + * It is the responsibility of the caller to provide mutual + * exclusion between two different calls of kobject_rename + * on the same kobject and to ensure that new_name is valid and + * won't conflict with other kobjects. */ int kobject_rename(struct kobject *kobj, const char *new_name) { @@ -401,19 +406,6 @@ int kobject_rename(struct kobject *kobj, const char *new_name) if (!kobj->parent) return -EINVAL; - /* see if this name is already in use */ - if (kobj->kset) { - struct kobject *temp_kobj; - temp_kobj = kset_find_obj(kobj->kset, new_name); - if (temp_kobj) { - printk(KERN_WARNING "kobject '%s' cannot be renamed " - "to '%s' as '%s' is already in existence.\n", - kobject_name(kobj), new_name, new_name); - kobject_put(temp_kobj); - return -EINVAL; - } - } - devpath = kobject_get_path(kobj, GFP_KERNEL); if (!devpath) { error = -ENOMEM; -- cgit v1.2.3-70-g09d2 From d86f4bc4bc34c63c90e5fd46a60c506b234f5708 Mon Sep 17 00:00:00 2001 From: Alberto Bertogli Date: Fri, 26 Sep 2008 23:10:31 -0300 Subject: Documentation/block/data-integrity.txt: Fix section numbers Signed-off-by: Alberto Bertogli Signed-off-by: Jonathan Corbet --- Documentation/block/data-integrity.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.txt index e9dc8d86adc..e8ca040ba2c 100644 --- a/Documentation/block/data-integrity.txt +++ b/Documentation/block/data-integrity.txt @@ -246,7 +246,7 @@ will require extra work due to the application tag. retrieve the tag buffer using bio_integrity_get_tag(). -6.3 PASSING EXISTING INTEGRITY METADATA +5.3 PASSING EXISTING INTEGRITY METADATA Filesystems that either generate their own integrity metadata or are capable of transferring IMD from user space can use the @@ -283,7 +283,7 @@ will require extra work due to the application tag. integrity upon completion. -6.4 REGISTERING A BLOCK DEVICE AS CAPABLE OF EXCHANGING INTEGRITY +5.4 REGISTERING A BLOCK DEVICE AS CAPABLE OF EXCHANGING INTEGRITY METADATA To enable integrity exchange on a block device the gendisk must be -- cgit v1.2.3-70-g09d2 From 75b021468368288ac8fec1a86a13f5cf2229139e Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Tue, 30 Sep 2008 15:15:56 -0600 Subject: Add the development process document This is an extended document intended to help interested developers, their managers, and their employers work with the kernel development process. This work was supported by the Linux Foundation. Signed-off-by: Jonathan Corbet --- Documentation/00-INDEX | 3 + Documentation/development-process/1.Intro | 274 ++++++++++++ Documentation/development-process/2.Process | 459 +++++++++++++++++++++ Documentation/development-process/3.Early-stage | 195 +++++++++ Documentation/development-process/4.Coding | 384 +++++++++++++++++ Documentation/development-process/5.Posting | 278 +++++++++++++ Documentation/development-process/6.Followthrough | 202 +++++++++ Documentation/development-process/7.AdvancedTopics | 173 ++++++++ Documentation/development-process/8.Conclusion | 74 ++++ 9 files changed, 2042 insertions(+) create mode 100644 Documentation/development-process/1.Intro create mode 100644 Documentation/development-process/2.Process create mode 100644 Documentation/development-process/3.Early-stage create mode 100644 Documentation/development-process/4.Coding create mode 100644 Documentation/development-process/5.Posting create mode 100644 Documentation/development-process/6.Followthrough create mode 100644 Documentation/development-process/7.AdvancedTopics create mode 100644 Documentation/development-process/8.Conclusion (limited to 'Documentation') diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 5b5aba404aa..1f3dbdfc9ae 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -21,6 +21,9 @@ Changes - list of changes that break older software packages. CodingStyle - how the boss likes the C code in the kernel to look. +development-process/ + - An extended tutorial on how to work with the kernel development + process. DMA-API.txt - DMA API, pci_ API & extensions for non-consistent memory machines. DMA-ISA-LPC.txt diff --git a/Documentation/development-process/1.Intro b/Documentation/development-process/1.Intro new file mode 100644 index 00000000000..8cc2cba2b10 --- /dev/null +++ b/Documentation/development-process/1.Intro @@ -0,0 +1,274 @@ +1: A GUIDE TO THE KERNEL DEVELOPMENT PROCESS + +The purpose of this document is to help developers (and their managers) +work with the development community with a minimum of frustration. It is +an attempt to document how this community works in a way which is +accessible to those who are not intimately familiar with Linux kernel +development (or, indeed, free software development in general). While +there is some technical material here, this is very much a process-oriented +discussion which does not require a deep knowledge of kernel programming to +understand. + + +1.1: EXECUTIVE SUMMARY + +The rest of this section covers the scope of the kernel development process +and the kinds of frustrations that developers and their employers can +encounter there. There are a great many reasons why kernel code should be +merged into the official ("mainline") kernel, including automatic +availability to users, community support in many forms, and the ability to +influence the direction of kernel development. Code contributed to the +Linux kernel must be made available under a GPL-compatible license. + +Section 2 introduces the development process, the kernel release cycle, and +the mechanics of the merge window. The various phases in the patch +development, review, and merging cycle are covered. There is some +discussion of tools and mailing lists. Developers wanting to get started +with kernel development are encouraged to track down and fix bugs as an +initial exercise. + +Section 3 covers early-stage project planning, with an emphasis on +involving the development community as soon as possible. + +Section 4 is about the coding process; several pitfalls which have been +encountered by other developers are discussed. Some requirements for +patches are covered, and there is an introduction to some of the tools +which can help to ensure that kernel patches are correct. + +Section 5 talks about the process of posting patches for review. To be +taken seriously by the development community, patches must be properly +formatted and described, and they must be sent to the right place. +Following the advice in this section should help to ensure the best +possible reception for your work. + +Section 6 covers what happens after posting patches; the job is far from +done at that point. Working with reviewers is a crucial part of the +development process; this section offers a number of tips on how to avoid +problems at this important stage. Developers are cautioned against +assuming that the job is done when a patch is merged into the mainline. + +Section 7 introduces a couple of "advanced" topics: managing patches with +git and reviewing patches posted by others. + +Section 8 concludes the document with pointers to sources for more +information on kernel development. + + +1.2: WHAT THIS DOCUMENT IS ABOUT + +The Linux kernel, at over 6 million lines of code and well over 1000 active +contributors, is one of the largest and most active free software projects +in existence. Since its humble beginning in 1991, this kernel has evolved +into a best-of-breed operating system component which runs on pocket-sized +digital music players, desktop PCs, the largest supercomputers in +existence, and all types of systems in between. It is a robust, efficient, +and scalable solution for almost any situation. + +With the growth of Linux has come an increase in the number of developers +(and companies) wishing to participate in its development. Hardware +vendors want to ensure that Linux supports their products well, making +those products attractive to Linux users. Embedded systems vendors, who +use Linux as a component in an integrated product, want Linux to be as +capable and well-suited to the task at hand as possible. Distributors and +other software vendors who base their products on Linux have a clear +interest in the capabilities, performance, and reliability of the Linux +kernel. And end users, too, will often wish to change Linux to make it +better suit their needs. + +One of the most compelling features of Linux is that it is accessible to +these developers; anybody with the requisite skills can improve Linux and +influence the direction of its development. Proprietary products cannot +offer this kind of openness, which is a characteristic of the free software +process. But, if anything, the kernel is even more open than most other +free software projects. A typical three-month kernel development cycle can +involve over 1000 developers working for more than 100 different companies +(or for no company at all). + +Working with the kernel development community is not especially hard. But, +that notwithstanding, many potential contributors have experienced +difficulties when trying to do kernel work. The kernel community has +evolved its own distinct ways of operating which allow it to function +smoothly (and produce a high-quality product) in an environment where +thousands of lines of code are being changed every day. So it is not +surprising that Linux kernel development process differs greatly from +proprietary development methods. + +The kernel's development process may come across as strange and +intimidating to new developers, but there are good reasons and solid +experience behind it. A developer who does not understand the kernel +community's ways (or, worse, who tries to flout or circumvent them) will +have a frustrating experience in store. The development community, while +being helpful to those who are trying to learn, has little time for those +who will not listen or who do not care about the development process. + +It is hoped that those who read this document will be able to avoid that +frustrating experience. There is a lot of material here, but the effort +involved in reading it will be repaid in short order. The development +community is always in need of developers who will help to make the kernel +better; the following text should help you - or those who work for you - +join our community. + + +1.3: CREDITS + +This document was written by Jonathan Corbet, corbet@lwn.net. It has been +improved by comments from Johannes Berg, James Berry, Alex Chiang, Roland +Dreier, Randy Dunlap, Jake Edge, Jiri Kosina, Matt Mackall, Arthur Marsh, +Amanda McPherson, Andrew Morton, Andrew Price, Tsugikazu Shibata, and +Jochen Voß. + +This work was supported by the Linux Foundation; thanks especially to +Amanda McPherson, who saw the value of this effort and made it all happen. + + +1.4: THE IMPORTANCE OF GETTING CODE INTO THE MAINLINE + +Some companies and developers occasionally wonder why they should bother +learning how to work with the kernel community and get their code into the +mainline kernel (the "mainline" being the kernel maintained by Linus +Torvalds and used as a base by Linux distributors). In the short term, +contributing code can look like an avoidable expense; it seems easier to +just keep the code separate and support users directly. The truth of the +matter is that keeping code separate ("out of tree") is a false economy. + +As a way of illustrating the costs of out-of-tree code, here are a few +relevant aspects of the kernel development process; most of these will be +discussed in greater detail later in this document. Consider: + +- Code which has been merged into the mainline kernel is available to all + Linux users. It will automatically be present on all distributions which + enable it. There is no need for driver disks, downloads, or the hassles + of supporting multiple versions of multiple distributions; it all just + works, for the developer and for the user. Incorporation into the + mainline solves a large number of distribution and support problems. + +- While kernel developers strive to maintain a stable interface to user + space, the internal kernel API is in constant flux. The lack of a stable + internal interface is a deliberate design decision; it allows fundamental + improvements to be made at any time and results in higher-quality code. + But one result of that policy is that any out-of-tree code requires + constant upkeep if it is to work with new kernels. Maintaining + out-of-tree code requires significant amounts of work just to keep that + code working. + + Code which is in the mainline, instead, does not require this work as the + result of a simple rule requiring any developer who makes an API change + to also fix any code that breaks as the result of that change. So code + which has been merged into the mainline has significantly lower + maintenance costs. + +- Beyond that, code which is in the kernel will often be improved by other + developers. Surprising results can come from empowering your user + community and customers to improve your product. + +- Kernel code is subjected to review, both before and after merging into + the mainline. No matter how strong the original developer's skills are, + this review process invariably finds ways in which the code can be + improved. Often review finds severe bugs and security problems. This is + especially true for code which has been developed in a closed + environment; such code benefits strongly from review by outside + developers. Out-of-tree code is lower-quality code. + +- Participation in the development process is your way to influence the + direction of kernel development. Users who complain from the sidelines + are heard, but active developers have a stronger voice - and the ability + to implement changes which make the kernel work better for their needs. + +- When code is maintained separately, the possibility that a third party + will contribute a different implementation of a similar feature always + exists. Should that happen, getting your code merged will become much + harder - to the point of impossibility. Then you will be faced with the + unpleasant alternatives of either (1) maintaining a nonstandard feature + out of tree indefinitely, or (2) abandoning your code and migrating your + users over to the in-tree version. + +- Contribution of code is the fundamental action which makes the whole + process work. By contributing your code you can add new functionality to + the kernel and provide capabilities and examples which are of use to + other kernel developers. If you have developed code for Linux (or are + thinking about doing so), you clearly have an interest in the continued + success of this platform; contributing code is one of the best ways to + help ensure that success. + +All of the reasoning above applies to any out-of-tree kernel code, +including code which is distributed in proprietary, binary-only form. +There are, however, additional factors which should be taken into account +before considering any sort of binary-only kernel code distribution. These +include: + +- The legal issues around the distribution of proprietary kernel modules + are cloudy at best; quite a few kernel copyright holders believe that + most binary-only modules are derived products of the kernel and that, as + a result, their distribution is a violation of the GNU General Public + license (about which more will be said below). Your author is not a + lawyer, and nothing in this document can possibly be considered to be + legal advice. The true legal status of closed-source modules can only be + determined by the courts. But the uncertainty which haunts those modules + is there regardless. + +- Binary modules greatly increase the difficulty of debugging kernel + problems, to the point that most kernel developers will not even try. So + the distribution of binary-only modules will make it harder for your + users to get support from the community. + +- Support is also harder for distributors of binary-only modules, who must + provide a version of the module for every distribution and every kernel + version they wish to support. Dozens of builds of a single module can + be required to provide reasonably comprehensive coverage, and your users + will have to upgrade your module separately every time they upgrade their + kernel. + +- Everything that was said above about code review applies doubly to + closed-source code. Since this code is not available at all, it cannot + have been reviewed by the community and will, beyond doubt, have serious + problems. + +Makers of embedded systems, in particular, may be tempted to disregard much +of what has been said in this section in the belief that they are shipping +a self-contained product which uses a frozen kernel version and requires no +more development after its release. This argument misses the value of +widespread code review and the value of allowing your users to add +capabilities to your product. But these products, too, have a limited +commercial life, after which a new version must be released. At that +point, vendors whose code is in the mainline and well maintained will be +much better positioned to get the new product ready for market quickly. + + +1.5: LICENSING + +Code is contributed to the Linux kernel under a number of licenses, but all +code must be compatible with version 2 of the GNU General Public License +(GPLv2), which is the license covering the kernel distribution as a whole. +In practice, that means that all code contributions are covered either by +GPLv2 (with, optionally, language allowing distribution under later +versions of the GPL) or the three-clause BSD license. Any contributions +which are not covered by a compatible license will not be accepted into the +kernel. + +Copyright assignments are not required (or requested) for code contributed +to the kernel. All code merged into the mainline kernel retains its +original ownership; as a result, the kernel now has thousands of owners. + +One implication of this ownership structure is that any attempt to change +the licensing of the kernel is doomed to almost certain failure. There are +few practical scenarios where the agreement of all copyright holders could +be obtained (or their code removed from the kernel). So, in particular, +there is no prospect of a migration to version 3 of the GPL in the +foreseeable future. + +It is imperative that all code contributed to the kernel be legitimately +free software. For that reason, code from anonymous (or pseudonymous) +contributors will not be accepted. All contributors are required to "sign +off" on their code, stating that the code can be distributed with the +kernel under the GPL. Code which has not been licensed as free software by +its owner, or which risks creating copyright-related problems for the +kernel (such as code which derives from reverse-engineering efforts lacking +proper safeguards) cannot be contributed. + +Questions about copyright-related issues are common on Linux development +mailing lists. Such questions will normally receive no shortage of +answers, but one should bear in mind that the people answering those +questions are not lawyers and cannot provide legal advice. If you have +legal questions relating to Linux source code, there is no substitute for +talking with a lawyer who understands this field. Relying on answers +obtained on technical mailing lists is a risky affair. diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process new file mode 100644 index 00000000000..d750321acd5 --- /dev/null +++ b/Documentation/development-process/2.Process @@ -0,0 +1,459 @@ +2: HOW THE DEVELOPMENT PROCESS WORKS + +Linux kernel development in the early 1990's was a pretty loose affair, +with relatively small numbers of users and developers involved. With a +user base in the millions and with some 2,000 developers involved over the +course of one year, the kernel has since had to evolve a number of +processes to keep development happening smoothly. A solid understanding of +how the process works is required in order to be an effective part of it. + + +2.1: THE BIG PICTURE + +The kernel developers use a loosely time-based release process, with a new +major kernel release happening every two or three months. The recent +release history looks like this: + + 2.6.26 July 13, 2008 + 2.6.25 April 16, 2008 + 2.6.24 January 24, 2008 + 2.6.23 October 9, 2007 + 2.6.22 July 8, 2007 + 2.6.21 April 25, 2007 + 2.6.20 February 4, 2007 + +Every 2.6.x release is a major kernel release with new features, internal +API changes, and more. A typical 2.6 release can contain over 10,000 +changesets with changes to several hundred thousand lines of code. 2.6 is +thus the leading edge of Linux kernel development; the kernel uses a +rolling development model which is continually integrating major changes. + +A relatively straightforward discipline is followed with regard to the +merging of patches for each release. At the beginning of each development +cycle, the "merge window" is said to be open. At that time, code which is +deemed to be sufficiently stable (and which is accepted by the development +community) is merged into the mainline kernel. The bulk of changes for a +new development cycle (and all of the major changes) will be merged during +this time, at a rate approaching 1,000 changes ("patches," or "changesets") +per day. + +(As an aside, it is worth noting that the changes integrated during the +merge window do not come out of thin air; they have been collected, tested, +and staged ahead of time. How that process works will be described in +detail later on). + +The merge window lasts for two weeks. At the end of this time, Linus +Torvalds will declare that the window is closed and release the first of +the "rc" kernels. For the kernel which is destined to be 2.6.26, for +example, the release which happens at the end of the merge window will be +called 2.6.26-rc1. The -rc1 release is the signal that the time to merge +new features has passed, and that the time to stabilize the next kernel has +begun. + +Over the next six to ten weeks, only patches which fix problems should be +submitted to the mainline. On occasion a more significant change will be +allowed, but such occasions are rare; developers who try to merge new +features outside of the merge window tend to get an unfriendly reception. +As a general rule, if you miss the merge window for a given feature, the +best thing to do is to wait for the next development cycle. (An occasional +exception is made for drivers for previously-unsupported hardware; if they +touch no in-tree code, they cannot cause regressions and should be safe to +add at any time). + +As fixes make their way into the mainline, the patch rate will slow over +time. Linus releases new -rc kernels about once a week; a normal series +will get up to somewhere between -rc6 and -rc9 before the kernel is +considered to be sufficiently stable and the final 2.6.x release is made. +At that point the whole process starts over again. + +As an example, here is how the 2.6.25 development cycle went (all dates in +2008): + + January 24 2.6.24 stable release + February 10 2.6.25-rc1, merge window closes + February 15 2.6.25-rc2 + February 24 2.6.25-rc3 + March 4 2.6.25-rc4 + March 9 2.6.25-rc5 + March 16 2.6.25-rc6 + March 25 2.6.25-rc7 + April 1 2.6.25-rc8 + April 11 2.6.25-rc9 + April 16 2.6.25 stable release + +How do the developers decide when to close the development cycle and create +the stable release? The most significant metric used is the list of +regressions from previous releases. No bugs are welcome, but those which +break systems which worked in the past are considered to be especially +serious. For this reason, patches which cause regressions are looked upon +unfavorably and are quite likely to be reverted during the stabilization +period. + +The developers' goal is to fix all known regressions before the stable +release is made. In the real world, this kind of perfection is hard to +achieve; there are just too many variables in a project of this size. +There comes a point where delaying the final release just makes the problem +worse; the pile of changes waiting for the next merge window will grow +larger, creating even more regressions the next time around. So most 2.6.x +kernels go out with a handful of known regressions though, hopefully, none +of them are serious. + +Once a stable release is made, its ongoing maintenance is passed off to the +"stable team," currently comprised of Greg Kroah-Hartman and Chris Wright. +The stable team will release occasional updates to the stable release using +the 2.6.x.y numbering scheme. To be considered for an update release, a +patch must (1) fix a significant bug, and (2) already be merged into the +mainline for the next development kernel. Continuing our 2.6.25 example, +the history (as of this writing) is: + + May 1 2.6.25.1 + May 6 2.6.25.2 + May 9 2.6.25.3 + May 15 2.6.25.4 + June 7 2.6.25.5 + June 9 2.6.25.6 + June 16 2.6.25.7 + June 21 2.6.25.8 + June 24 2.6.25.9 + +Stable updates for a given kernel are made for approximately six months; +after that, the maintenance of stable releases is solely the responsibility +of the distributors which have shipped that particular kernel. + + +2.2: THE LIFECYCLE OF A PATCH + +Patches do not go directly from the developer's keyboard into the mainline +kernel. There is, instead, a somewhat involved (if somewhat informal) +process designed to ensure that each patch is reviewed for quality and that +each patch implements a change which is desirable to have in the mainline. +This process can happen quickly for minor fixes, or, in the case of large +and controversial changes, go on for years. Much developer frustration +comes from a lack of understanding of this process or from attempts to +circumvent it. + +In the hopes of reducing that frustration, this document will describe how +a patch gets into the kernel. What follows below is an introduction which +describes the process in a somewhat idealized way. A much more detailed +treatment will come in later sections. + +The stages that a patch goes through are, generally: + + - Design. This is where the real requirements for the patch - and the way + those requirements will be met - are laid out. Design work is often + done without involving the community, but it is better to do this work + in the open if at all possible; it can save a lot of time redesigning + things later. + + - Early review. Patches are posted to the relevant mailing list, and + developers on that list reply with any comments they may have. This + process should turn up any major problems with a patch if all goes + well. + + - Wider review. When the patch is getting close to ready for mainline + inclusion, it will be accepted by a relevant subsystem maintainer - + though this acceptance is not a guarantee that the patch will make it + all the way to the mainline. The patch will show up in the maintainer's + subsystem tree and into the staging trees (described below). When the + process works, this step leads to more extensive review of the patch and + the discovery of any problems resulting from the integration of this + patch with work being done by others. + + - Merging into the mainline. Eventually, a successful patch will be + merged into the mainline repository managed by Linus Torvalds. More + comments and/or problems may surface at this time; it is important that + the developer be responsive to these and fix any issues which arise. + + - Stable release. The number of users potentially affected by the patch + is now large, so, once again, new problems may arise. + + - Long-term maintenance. While it is certainly possible for a developer + to forget about code after merging it, that sort of behavior tends to + leave a poor impression in the development community. Merging code + eliminates some of the maintenance burden, in that others will fix + problems caused by API changes. But the original developer should + continue to take responsibility for the code if it is to remain useful + in the longer term. + +One of the largest mistakes made by kernel developers (or their employers) +is to try to cut the process down to a single "merging into the mainline" +step. This approach invariably leads to frustration for everybody +involved. + + +2.3: HOW PATCHES GET INTO THE KERNEL + +There is exactly one person who can merge patches into the mainline kernel +repository: Linus Torvalds. But, of the over 12,000 patches which went +into the 2.6.25 kernel, only 250 (around 2%) were directly chosen by Linus +himself. The kernel project has long since grown to a size where no single +developer could possibly inspect and select every patch unassisted. The +way the kernel developers have addressed this growth is through the use of +a lieutenant system built around a chain of trust. + +The kernel code base is logically broken down into a set of subsystems: +networking, specific architecture support, memory management, video +devices, etc. Most subsystems have a designated maintainer, a developer +who has overall responsibility for the code within that subsystem. These +subsystem maintainers are the gatekeepers (in a loose way) for the portion +of the kernel they manage; they are the ones who will (usually) accept a +patch for inclusion into the mainline kernel. + +Subsystem maintainers each manage their own version of the kernel source +tree, usually (but certainly not always) using the git source management +tool. Tools like git (and related tools like quilt or mercurial) allow +maintainers to track a list of patches, including authorship information +and other metadata. At any given time, the maintainer can identify which +patches in his or her repository are not found in the mainline. + +When the merge window opens, top-level maintainers will ask Linus to "pull" +the patches they have selected for merging from their repositories. If +Linus agrees, the stream of patches will flow up into his repository, +becoming part of the mainline kernel. The amount of attention that Linus +pays to specific patches received in a pull operation varies. It is clear +that, sometimes, he looks quite closely. But, as a general rule, Linus +trusts the subsystem maintainers to not send bad patches upstream. + +Subsystem maintainers, in turn, can pull patches from other maintainers. +For example, the networking tree is built from patches which accumulated +first in trees dedicated to network device drivers, wireless networking, +etc. This chain of repositories can be arbitrarily long, though it rarely +exceeds two or three links. Since each maintainer in the chain trusts +those managing lower-level trees, this process is known as the "chain of +trust." + +Clearly, in a system like this, getting patches into the kernel depends on +finding the right maintainer. Sending patches directly to Linus is not +normally the right way to go. + + +2.4: STAGING TREES + +The chain of subsystem trees guides the flow of patches into the kernel, +but it also raises an interesting question: what if somebody wants to look +at all of the patches which are being prepared for the next merge window? +Developers will be interested in what other changes are pending to see +whether there are any conflicts to worry about; a patch which changes a +core kernel function prototype, for example, will conflict with any other +patches which use the older form of that function. Reviewers and testers +want access to the changes in their integrated form before all of those +changes land in the mainline kernel. One could pull changes from all of +the interesting subsystem trees, but that would be a big and error-prone +job. + +The answer comes in the form of staging trees, where subsystem trees are +collected for testing and review. The older of these trees, maintained by +Andrew Morton, is called "-mm" (for memory management, which is how it got +started). The -mm tree integrates patches from a long list of subsystem +trees; it also has some patches aimed at helping with debugging. + +Beyond that, -mm contains a significant collection of patches which have +been selected by Andrew directly. These patches may have been posted on a +mailing list, or they may apply to a part of the kernel for which there is +no designated subsystem tree. As a result, -mm operates as a sort of +subsystem tree of last resort; if there is no other obvious path for a +patch into the mainline, it is likely to end up in -mm. Miscellaneous +patches which accumulate in -mm will eventually either be forwarded on to +an appropriate subsystem tree or be sent directly to Linus. In a typical +development cycle, approximately 10% of the patches going into the mainline +get there via -mm. + +The current -mm patch can always be found from the front page of + + http://kernel.org/ + +Those who want to see the current state of -mm can get the "-mm of the +moment" tree, found at: + + http://userweb.kernel.org/~akpm/mmotm/ + +Use of the MMOTM tree is likely to be a frustrating experience, though; +there is a definite chance that it will not even compile. + +The other staging tree, started more recently, is linux-next, maintained by +Stephen Rothwell. The linux-next tree is, by design, a snapshot of what +the mainline is expected to look like after the next merge window closes. +Linux-next trees are announced on the linux-kernel and linux-next mailing +lists when they are assembled; they can be downloaded from: + + http://www.kernel.org/pub/linux/kernel/people/sfr/linux-next/ + +Some information about linux-next has been gathered at: + + http://linux.f-seidel.de/linux-next/pmwiki/ + +How the linux-next tree will fit into the development process is still +changing. As of this writing, the first full development cycle involving +linux-next (2.6.26) is coming to an end; thus far, it has proved to be a +valuable resource for finding and fixing integration problems before the +beginning of the merge window. See http://lwn.net/Articles/287155/ for +more information on how linux-next has worked to set up the 2.6.27 merge +window. + +Some developers have begun to suggest that linux-next should be used as the +target for future development as well. The linux-next tree does tend to be +far ahead of the mainline and is more representative of the tree into which +any new work will be merged. The downside to this idea is that the +volatility of linux-next tends to make it a difficult development target. +See http://lwn.net/Articles/289013/ for more information on this topic, and +stay tuned; much is still in flux where linux-next is involved. + + +2.5: TOOLS + +As can be seen from the above text, the kernel development process depends +heavily on the ability to herd collections of patches in various +directions. The whole thing would not work anywhere near as well as it +does without suitably powerful tools. Tutorials on how to use these tools +are well beyond the scope of this document, but there is space for a few +pointers. + +By far the dominant source code management system used by the kernel +community is git. Git is one of a number of distributed version control +systems being developed in the free software community. It is well tuned +for kernel development, in that it performs quite well when dealing with +large repositories and large numbers of patches. It also has a reputation +for being difficult to learn and use, though it has gotten better over +time. Some sort of familiarity with git is almost a requirement for kernel +developers; even if they do not use it for their own work, they'll need git +to keep up with what other developers (and the mainline) are doing. + +Git is now packaged by almost all Linux distributions. There is a home +page at + + http://git.or.cz/ + +That page has pointers to documentation and tutorials. One should be +aware, in particular, of the Kernel Hacker's Guide to git, which has +information specific to kernel development: + + http://linux.yyz.us/git-howto.html + +Among the kernel developers who do not use git, the most popular choice is +almost certainly Mercurial: + + http://www.selenic.com/mercurial/ + +Mercurial shares many features with git, but it provides an interface which +many find easier to use. + +The other tool worth knowing about is Quilt: + + http://savannah.nongnu.org/projects/quilt/ + +Quilt is a patch management system, rather than a source code management +system. It does not track history over time; it is, instead, oriented +toward tracking a specific set of changes against an evolving code base. +Some major subsystem maintainers use quilt to manage patches intended to go +upstream. For the management of certain kinds of trees (-mm, for example), +quilt is the best tool for the job. + + +2.6: MAILING LISTS + +A great deal of Linux kernel development work is done by way of mailing +lists. It is hard to be a fully-functioning member of the community +without joining at least one list somewhere. But Linux mailing lists also +represent a potential hazard to developers, who risk getting buried under a +load of electronic mail, running afoul of the conventions used on the Linux +lists, or both. + +Most kernel mailing lists are run on vger.kernel.org; the master list can +be found at: + + http://vger.kernel.org/vger-lists.html + +There are lists hosted elsewhere, though; a number of them are at +lists.redhat.com. + +The core mailing list for kernel development is, of course, linux-kernel. +This list is an intimidating place to be; volume can reach 500 messages per +day, the amount of noise is high, the conversation can be severely +technical, and participants are not always concerned with showing a high +degree of politeness. But there is no other place where the kernel +development community comes together as a whole; developers who avoid this +list will miss important information. + +There are a few hints which can help with linux-kernel survival: + +- Have the list delivered to a separate folder, rather than your main + mailbox. One must be able to ignore the stream for sustained periods of + time. + +- Do not try to follow every conversation - nobody else does. It is + important to filter on both the topic of interest (though note that + long-running conversations can drift away from the original subject + without changing the email subject line) and the people who are + participating. + +- Do not feed the trolls. If somebody is trying to stir up an angry + response, ignore them. + +- When responding to linux-kernel email (or that on other lists) preserve + the Cc: header for all involved. In the absence of a strong reason (such + as an explicit request), you should never remove recipients. Always make + sure that the person you are responding to is in the Cc: list. This + convention also makes it unnecessary to explicitly ask to be copied on + replies to your postings. + +- Search the list archives (and the net as a whole) before asking + questions. Some developers can get impatient with people who clearly + have not done their homework. + +- Avoid top-posting (the practice of putting your answer above the quoted + text you are responding to). It makes your response harder to read and + makes a poor impression. + +- Ask on the correct mailing list. Linux-kernel may be the general meeting + point, but it is not the best place to find developers from all + subsystems. + +The last point - finding the correct mailing list - is a common place for +beginning developers to go wrong. Somebody who asks a networking-related +question on linux-kernel will almost certainly receive a polite suggestion +to ask on the netdev list instead, as that is the list frequented by most +networking developers. Other lists exist for the SCSI, video4linux, IDE, +filesystem, etc. subsystems. The best place to look for mailing lists is +in the MAINTAINERS file packaged with the kernel source. + + +2.7: GETTING STARTED WITH KERNEL DEVELOPMENT + +Questions about how to get started with the kernel development process are +common - from both individuals and companies. Equally common are missteps +which make the beginning of the relationship harder than it has to be. + +Companies often look to hire well-known developers to get a development +group started. This can, in fact, be an effective technique. But it also +tends to be expensive and does not do much to grow the pool of experienced +kernel developers. It is possible to bring in-house developers up to speed +on Linux kernel development, given the investment of a bit of time. Taking +this time can endow an employer with a group of developers who understand +the kernel and the company both, and who can help to train others as well. +Over the medium term, this is often the more profitable approach. + +Individual developers are often, understandably, at a loss for a place to +start. Beginning with a large project can be intimidating; one often wants +to test the waters with something smaller first. This is the point where +some developers jump into the creation of patches fixing spelling errors or +minor coding style issues. Unfortunately, such patches create a level of +noise which is distracting for the development community as a whole, so, +increasingly, they are looked down upon. New developers wishing to +introduce themselves to the community will not get the sort of reception +they wish for by these means. + +Andrew Morton gives this advice for aspiring kernel developers + + The #1 project for all kernel beginners should surely be "make sure + that the kernel runs perfectly at all times on all machines which + you can lay your hands on". Usually the way to do this is to work + with others on getting things fixed up (this can require + persistence!) but that's fine - it's a part of kernel development. + +(http://lwn.net/Articles/283982/). + +In the absence of obvious problems to fix, developers are advised to look +at the current lists of regressions and open bugs in general. There is +never any shortage of issues in need of fixing; by addressing these issues, +developers will gain experience with the process while, at the same time, +building respect with the rest of the development community. diff --git a/Documentation/development-process/3.Early-stage b/Documentation/development-process/3.Early-stage new file mode 100644 index 00000000000..307a159a70c --- /dev/null +++ b/Documentation/development-process/3.Early-stage @@ -0,0 +1,195 @@ +3: EARLY-STAGE PLANNING + +When contemplating a Linux kernel development project, it can be tempting +to jump right in and start coding. As with any significant project, +though, much of the groundwork for success is best laid before the first +line of code is written. Some time spent in early planning and +communication can save far more time later on. + + +3.1: SPECIFYING THE PROBLEM + +Like any engineering project, a successful kernel enhancement starts with a +clear description of the problem to be solved. In some cases, this step is +easy: when a driver is needed for a specific piece of hardware, for +example. In others, though, it is tempting to confuse the real problem +with the proposed solution, and that can lead to difficulties. + +Consider an example: some years ago, developers working with Linux audio +sought a way to run applications without dropouts or other artifacts caused +by excessive latency in the system. The solution they arrived at was a +kernel module intended to hook into the Linux Security Module (LSM) +framework; this module could be configured to give specific applications +access to the realtime scheduler. This module was implemented and sent to +the linux-kernel mailing list, where it immediately ran into problems. + +To the audio developers, this security module was sufficient to solve their +immediate problem. To the wider kernel community, though, it was seen as a +misuse of the LSM framework (which is not intended to confer privileges +onto processes which they would not otherwise have) and a risk to system +stability. Their preferred solutions involved realtime scheduling access +via the rlimit mechanism for the short term, and ongoing latency reduction +work in the long term. + +The audio community, however, could not see past the particular solution +they had implemented; they were unwilling to accept alternatives. The +resulting disagreement left those developers feeling disillusioned with the +entire kernel development process; one of them went back to an audio list +and posted this: + + There are a number of very good Linux kernel developers, but they + tend to get outshouted by a large crowd of arrogant fools. Trying + to communicate user requirements to these people is a waste of + time. They are much too "intelligent" to listen to lesser mortals. + +(http://lwn.net/Articles/131776/). + +The reality of the situation was different; the kernel developers were far +more concerned about system stability, long-term maintenance, and finding +the right solution to the problem than they were with a specific module. +The moral of the story is to focus on the problem - not a specific solution +- and to discuss it with the development community before investing in the +creation of a body of code. + +So, when contemplating a kernel development project, one should obtain +answers to a short set of questions: + + - What, exactly, is the problem which needs to be solved? + + - Who are the users affected by this problem? Which use cases should the + solution address? + + - How does the kernel fall short in addressing that problem now? + +Only then does it make sense to start considering possible solutions. + + +3.2: EARLY DISCUSSION + +When planning a kernel development project, it makes great sense to hold +discussions with the community before launching into implementation. Early +communication can save time and trouble in a number of ways: + + - It may well be that the problem is addressed by the kernel in ways which + you have not understood. The Linux kernel is large and has a number of + features and capabilities which are not immediately obvious. Not all + kernel capabilities are documented as well as one might like, and it is + easy to miss things. Your author has seen the posting of a complete + driver which duplicated an existing driver that the new author had been + unaware of. Code which reinvents existing wheels is not only wasteful; + it will also not be accepted into the mainline kernel. + + - There may be elements of the proposed solution which will not be + acceptable for mainline merging. It is better to find out about + problems like this before writing the code. + + - It's entirely possible that other developers have thought about the + problem; they may have ideas for a better solution, and may be willing + to help in the creation of that solution. + +Years of experience with the kernel development community have taught a +clear lesson: kernel code which is designed and developed behind closed +doors invariably has problems which are only revealed when the code is +released into the community. Sometimes these problems are severe, +requiring months or years of effort before the code can be brought up to +the kernel community's standards. Some examples include: + + - The Devicescape network stack was designed and implemented for + single-processor systems. It could not be merged into the mainline + until it was made suitable for multiprocessor systems. Retrofitting + locking and such into code is a difficult task; as a result, the merging + of this code (now called mac80211) was delayed for over a year. + + - The Reiser4 filesystem included a number of capabilities which, in the + core kernel developers' opinion, should have been implemented in the + virtual filesystem layer instead. It also included features which could + not easily be implemented without exposing the system to user-caused + deadlocks. The late revelation of these problems - and refusal to + address some of them - has caused Reiser4 to stay out of the mainline + kernel. + + - The AppArmor security module made use of internal virtual filesystem + data structures in ways which were considered to be unsafe and + unreliable. This code has since been significantly reworked, but + remains outside of the mainline. + +In each of these cases, a great deal of pain and extra work could have been +avoided with some early discussion with the kernel developers. + + +3.3: WHO DO YOU TALK TO? + +When developers decide to take their plans public, the next question will +be: where do we start? The answer is to find the right mailing list(s) and +the right maintainer. For mailing lists, the best approach is to look in +the MAINTAINERS file for a relevant place to post. If there is a suitable +subsystem list, posting there is often preferable to posting on +linux-kernel; you are more likely to reach developers with expertise in the +relevant subsystem and the environment may be more supportive. + +Finding maintainers can be a bit harder. Again, the MAINTAINERS file is +the place to start. That file tends to not always be up to date, though, +and not all subsystems are represented there. The person listed in the +MAINTAINERS file may, in fact, not be the person who is actually acting in +that role currently. So, when there is doubt about who to contact, a +useful trick is to use git (and "git log" in particular) to see who is +currently active within the subsystem of interest. Look at who is writing +patches, and who, if anybody, is attaching Signed-off-by lines to those +patches. Those are the people who will be best placed to help with a new +development project. + +If all else fails, talking to Andrew Morton can be an effective way to +track down a maintainer for a specific piece of code. + + +3.4: WHEN TO POST? + +If possible, posting your plans during the early stages can only be +helpful. Describe the problem being solved and any plans that have been +made on how the implementation will be done. Any information you can +provide can help the development community provide useful input on the +project. + +One discouraging thing which can happen at this stage is not a hostile +reaction, but, instead, little or no reaction at all. The sad truth of the +matter is (1) kernel developers tend to be busy, (2) there is no shortage +of people with grand plans and little code (or even prospect of code) to +back them up, and (3) nobody is obligated to review or comment on ideas +posted by others. If a request-for-comments posting yields little in the +way of comments, do not assume that it means there is no interest in the +project. Unfortunately, you also cannot assume that there are no problems +with your idea. The best thing to do in this situation is to proceed, +keeping the community informed as you go. + + +3.5: GETTING OFFICIAL BUY-IN + +If your work is being done in a corporate environment - as most Linux +kernel work is - you must, obviously, have permission from suitably +empowered managers before you can post your company's plans or code to a +public mailing list. The posting of code which has not been cleared for +release under a GPL-compatible license can be especially problematic; the +sooner that a company's management and legal staff can agree on the posting +of a kernel development project, the better off everybody involved will be. + +Some readers may be thinking at this point that their kernel work is +intended to support a product which does not yet have an officially +acknowledged existence. Revealing their employer's plans on a public +mailing list may not be a viable option. In cases like this, it is worth +considering whether the secrecy is really necessary; there is often no real +need to keep development plans behind closed doors. + +That said, there are also cases where a company legitimately cannot +disclose its plans early in the development process. Companies with +experienced kernel developers may choose to proceed in an open-loop manner +on the assumption that they will be able to avoid serious integration +problems later. For companies without that sort of in-house expertise, the +best option is often to hire an outside developer to review the plans under +a non-disclosure agreement. The Linux Foundation operates an NDA program +designed to help with this sort of situation; more information can be found +at: + + http://www.linuxfoundation.org/en/NDA_program + +This kind of review is often enough to avoid serious problems later on +without requiring public disclosure of the project. diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding new file mode 100644 index 00000000000..014aca8f14e --- /dev/null +++ b/Documentation/development-process/4.Coding @@ -0,0 +1,384 @@ +4: GETTING THE CODE RIGHT + +While there is much to be said for a solid and community-oriented design +process, the proof of any kernel development project is in the resulting +code. It is the code which will be examined by other developers and merged +(or not) into the mainline tree. So it is the quality of this code which +will determine the ultimate success of the project. + +This section will examine the coding process. We'll start with a look at a +number of ways in which kernel developers can go wrong. Then the focus +will shift toward doing things right and the tools which can help in that +quest. + + +4.1: PITFALLS + +* Coding style + +The kernel has long had a standard coding style, described in +Documentation/CodingStyle. For much of that time, the policies described +in that file were taken as being, at most, advisory. As a result, there is +a substantial amount of code in the kernel which does not meet the coding +style guidelines. The presence of that code leads to two independent +hazards for kernel developers. + +The first of these is to believe that the kernel coding standards do not +matter and are not enforced. The truth of the matter is that adding new +code to the kernel is very difficult if that code is not coded according to +the standard; many developers will request that the code be reformatted +before they will even review it. A code base as large as the kernel +requires some uniformity of code to make it possible for developers to +quickly understand any part of it. So there is no longer room for +strangely-formatted code. + +Occasionally, the kernel's coding style will run into conflict with an +employer's mandated style. In such cases, the kernel's style will have to +win before the code can be merged. Putting code into the kernel means +giving up a degree of control in a number of ways - including control over +how the code is formatted. + +The other trap is to assume that code which is already in the kernel is +urgently in need of coding style fixes. Developers may start to generate +reformatting patches as a way of gaining familiarity with the process, or +as a way of getting their name into the kernel changelogs - or both. But +pure coding style fixes are seen as noise by the development community; +they tend to get a chilly reception. So this type of patch is best +avoided. It is natural to fix the style of a piece of code while working +on it for other reasons, but coding style changes should not be made for +their own sake. + +The coding style document also should not be read as an absolute law which +can never be transgressed. If there is a good reason to go against the +style (a line which becomes far less readable if split to fit within the +80-column limit, for example), just do it. + + +* Abstraction layers + +Computer Science professors teach students to make extensive use of +abstraction layers in the name of flexibility and information hiding. +Certainly the kernel makes extensive use of abstraction; no project +involving several million lines of code could do otherwise and survive. +But experience has shown that excessive or premature abstraction can be +just as harmful as premature optimization. Abstraction should be used to +the level required and no further. + +At a simple level, consider a function which has an argument which is +always passed as zero by all callers. One could retain that argument just +in case somebody eventually needs to use the extra flexibility that it +provides. By that time, though, chances are good that the code which +implements this extra argument has been broken in some subtle way which was +never noticed - because it has never been used. Or, when the need for +extra flexibility arises, it does not do so in a way which matches the +programmer's early expectation. Kernel developers will routinely submit +patches to remove unused arguments; they should, in general, not be added +in the first place. + +Abstraction layers which hide access to hardware - often to allow the bulk +of a driver to be used with multiple operating systems - are especially +frowned upon. Such layers obscure the code and may impose a performance +penalty; they do not belong in the Linux kernel. + +On the other hand, if you find yourself copying significant amounts of code +from another kernel subsystem, it is time to ask whether it would, in fact, +make sense to pull out some of that code into a separate library or to +implement that functionality at a higher level. There is no value in +replicating the same code throughout the kernel. + + +* #ifdef and preprocessor use in general + +The C preprocessor seems to present a powerful temptation to some C +programmers, who see it as a way to efficiently encode a great deal of +flexibility into a source file. But the preprocessor is not C, and heavy +use of it results in code which is much harder for others to read and +harder for the compiler to check for correctness. Heavy preprocessor use +is almost always a sign of code which needs some cleanup work. + +Conditional compilation with #ifdef is, indeed, a powerful feature, and it +is used within the kernel. But there is little desire to see code which is +sprinkled liberally with #ifdef blocks. As a general rule, #ifdef use +should be confined to header files whenever possible. +Conditionally-compiled code can be confined to functions which, if the code +is not to be present, simply become empty. The compiler will then quietly +optimize out the call to the empty function. The result is far cleaner +code which is easier to follow. + +C preprocessor macros present a number of hazards, including possible +multiple evaluation of expressions with side effects and no type safety. +If you are tempted to define a macro, consider creating an inline function +instead. The code which results will be the same, but inline functions are +easier to read, do not evaluate their arguments multiple times, and allow +the compiler to perform type checking on the arguments and return value. + + +* Inline functions + +Inline functions present a hazard of their own, though. Programmers can +become enamored of the perceived efficiency inherent in avoiding a function +call and fill a source file with inline functions. Those functions, +however, can actually reduce performance. Since their code is replicated +at each call site, they end up bloating the size of the compiled kernel. +That, in turn, creates pressure on the processor's memory caches, which can +slow execution dramatically. Inline functions, as a rule, should be quite +small and relatively rare. The cost of a function call, after all, is not +that high; the creation of large numbers of inline functions is a classic +example of premature optimization. + +In general, kernel programmers ignore cache effects at their peril. The +classic time/space tradeoff taught in beginning data structures classes +often does not apply to contemporary hardware. Space *is* time, in that a +larger program will run slower than one which is more compact. + + +* Locking + +In May, 2006, the "Devicescape" networking stack was, with great +fanfare, released under the GPL and made available for inclusion in the +mainline kernel. This donation was welcome news; support for wireless +networking in Linux was considered substandard at best, and the Devicescape +stack offered the promise of fixing that situation. Yet, this code did not +actually make it into the mainline until June, 2007 (2.6.22). What +happened? + +This code showed a number of signs of having been developed behind +corporate doors. But one large problem in particular was that it was not +designed to work on multiprocessor systems. Before this networking stack +(now called mac80211) could be merged, a locking scheme needed to be +retrofitted onto it. + +Once upon a time, Linux kernel code could be developed without thinking +about the concurrency issues presented by multiprocessor systems. Now, +however, this document is being written on a dual-core laptop. Even on +single-processor systems, work being done to improve responsiveness will +raise the level of concurrency within the kernel. The days when kernel +code could be written without thinking about locking are long past. + +Any resource (data structures, hardware registers, etc.) which could be +accessed concurrently by more than one thread must be protected by a lock. +New code should be written with this requirement in mind; retrofitting +locking after the fact is a rather more difficult task. Kernel developers +should take the time to understand the available locking primitives well +enough to pick the right tool for the job. Code which shows a lack of +attention to concurrency will have a difficult path into the mainline. + + +* Regressions + +One final hazard worth mentioning is this: it can be tempting to make a +change (which may bring big improvements) which causes something to break +for existing users. This kind of change is called a "regression," and +regressions have become most unwelcome in the mainline kernel. With few +exceptions, changes which cause regressions will be backed out if the +regression cannot be fixed in a timely manner. Far better to avoid the +regression in the first place. + +It is often argued that a regression can be justified if it causes things +to work for more people than it creates problems for. Why not make a +change if it brings new functionality to ten systems for each one it +breaks? The best answer to this question was expressed by Linus in July, +2007: + + So we don't fix bugs by introducing new problems. That way lies + madness, and nobody ever knows if you actually make any real + progress at all. Is it two steps forwards, one step back, or one + step forward and two steps back? + +(http://lwn.net/Articles/243460/). + +An especially unwelcome type of regression is any sort of change to the +user-space ABI. Once an interface has been exported to user space, it must +be supported indefinitely. This fact makes the creation of user-space +interfaces particularly challenging: since they cannot be changed in +incompatible ways, they must be done right the first time. For this +reason, a great deal of thought, clear documentation, and wide review for +user-space interfaces is always required. + + + +4.2: CODE CHECKING TOOLS + +For now, at least, the writing of error-free code remains an ideal that few +of us can reach. What we can hope to do, though, is to catch and fix as +many of those errors as possible before our code goes into the mainline +kernel. To that end, the kernel developers have put together an impressive +array of tools which can catch a wide variety of obscure problems in an +automated way. Any problem caught by the computer is a problem which will +not afflict a user later on, so it stands to reason that the automated +tools should be used whenever possible. + +The first step is simply to heed the warnings produced by the compiler. +Contemporary versions of gcc can detect (and warn about) a large number of +potential errors. Quite often, these warnings point to real problems. +Code submitted for review should, as a rule, not produce any compiler +warnings. When silencing warnings, take care to understand the real cause +and try to avoid "fixes" which make the warning go away without addressing +its cause. + +Note that not all compiler warnings are enabled by default. Build the +kernel with "make EXTRA_CFLAGS=-W" to get the full set. + +The kernel provides several configuration options which turn on debugging +features; most of these are found in the "kernel hacking" submenu. Several +of these options should be turned on for any kernel used for development or +testing purposes. In particular, you should turn on: + + - ENABLE_WARN_DEPRECATED, ENABLE_MUST_CHECK, and FRAME_WARN to get an + extra set of warnings for problems like the use of deprecated interfaces + or ignoring an important return value from a function. The output + generated by these warnings can be verbose, but one need not worry about + warnings from other parts of the kernel. + + - DEBUG_OBJECTS will add code to track the lifetime of various objects + created by the kernel and warn when things are done out of order. If + you are adding a subsystem which creates (and exports) complex objects + of its own, consider adding support for the object debugging + infrastructure. + + - DEBUG_SLAB can find a variety of memory allocation and use errors; it + should be used on most development kernels. + + - DEBUG_SPINLOCK, DEBUG_SPINLOCK_SLEEP, and DEBUG_MUTEXES will find a + number of common locking errors. + +There are quite a few other debugging options, some of which will be +discussed below. Some of them have a significant performance impact and +should not be used all of the time. But some time spent learning the +available options will likely be paid back many times over in short order. + +One of the heavier debugging tools is the locking checker, or "lockdep." +This tool will track the acquisition and release of every lock (spinlock or +mutex) in the system, the order in which locks are acquired relative to +each other, the current interrupt environment, and more. It can then +ensure that locks are always acquired in the same order, that the same +interrupt assumptions apply in all situations, and so on. In other words, +lockdep can find a number of scenarios in which the system could, on rare +occasion, deadlock. This kind of problem can be painful (for both +developers and users) in a deployed system; lockdep allows them to be found +in an automated manner ahead of time. Code with any sort of non-trivial +locking should be run with lockdep enabled before being submitted for +inclusion. + +As a diligent kernel programmer, you will, beyond doubt, check the return +status of any operation (such as a memory allocation) which can fail. The +fact of the matter, though, is that the resulting failure recovery paths +are, probably, completely untested. Untested code tends to be broken code; +you could be much more confident of your code if all those error-handling +paths had been exercised a few times. + +The kernel provides a fault injection framework which can do exactly that, +especially where memory allocations are involved. With fault injection +enabled, a configurable percentage of memory allocations will be made to +fail; these failures can be restricted to a specific range of code. +Running with fault injection enabled allows the programmer to see how the +code responds when things go badly. See +Documentation/fault-injection/fault-injection.text for more information on +how to use this facility. + +Other kinds of errors can be found with the "sparse" static analysis tool. +With sparse, the programmer can be warned about confusion between +user-space and kernel-space addresses, mixture of big-endian and +small-endian quantities, the passing of integer values where a set of bit +flags is expected, and so on. Sparse must be installed separately (it can +be found at http://www.kernel.org/pub/software/devel/sparse/ if your +distributor does not package it); it can then be run on the code by adding +"C=1" to your make command. + +Other kinds of portability errors are best found by compiling your code for +other architectures. If you do not happen to have an S/390 system or a +Blackfin development board handy, you can still perform the compilation +step. A large set of cross compilers for x86 systems can be found at + + http://www.kernel.org/pub/tools/crosstool/ + +Some time spent installing and using these compilers will help avoid +embarrassment later. + + +4.3: DOCUMENTATION + +Documentation has often been more the exception than the rule with kernel +development. Even so, adequate documentation will help to ease the merging +of new code into the kernel, make life easier for other developers, and +will be helpful for your users. In many cases, the addition of +documentation has become essentially mandatory. + +The first piece of documentation for any patch is its associated +changelog. Log entries should describe the problem being solved, the form +of the solution, the people who worked on the patch, any relevant +effects on performance, and anything else that might be needed to +understand the patch. + +Any code which adds a new user-space interface - including new sysfs or +/proc files - should include documentation of that interface which enables +user-space developers to know what they are working with. See +Documentation/ABI/README for a description of how this documentation should +be formatted and what information needs to be provided. + +The file Documentation/kernel-parameters.txt describes all of the kernel's +boot-time parameters. Any patch which adds new parameters should add the +appropriate entries to this file. + +Any new configuration options must be accompanied by help text which +clearly explains the options and when the user might want to select them. + +Internal API information for many subsystems is documented by way of +specially-formatted comments; these comments can be extracted and formatted +in a number of ways by the "kernel-doc" script. If you are working within +a subsystem which has kerneldoc comments, you should maintain them and add +them, as appropriate, for externally-available functions. Even in areas +which have not been so documented, there is no harm in adding kerneldoc +comments for the future; indeed, this can be a useful activity for +beginning kernel developers. The format of these comments, along with some +information on how to create kerneldoc templates can be found in the file +Documentation/kernel-doc-nano-HOWTO.txt. + +Anybody who reads through a significant amount of existing kernel code will +note that, often, comments are most notable by their absence. Once again, +the expectations for new code are higher than they were in the past; +merging uncommented code will be harder. That said, there is little desire +for verbosely-commented code. The code should, itself, be readable, with +comments explaining the more subtle aspects. + +Certain things should always be commented. Uses of memory barriers should +be accompanied by a line explaining why the barrier is necessary. The +locking rules for data structures generally need to be explained somewhere. +Major data structures need comprehensive documentation in general. +Non-obvious dependencies between separate bits of code should be pointed +out. Anything which might tempt a code janitor to make an incorrect +"cleanup" needs a comment saying why it is done the way it is. And so on. + + +4.4: INTERNAL API CHANGES + +The binary interface provided by the kernel to user space cannot be broken +except under the most severe circumstances. The kernel's internal +programming interfaces, instead, are highly fluid and can be changed when +the need arises. If you find yourself having to work around a kernel API, +or simply not using a specific functionality because it does not meet your +needs, that may be a sign that the API needs to change. As a kernel +developer, you are empowered to make such changes. + +There are, of course, some catches. API changes can be made, but they need +to be well justified. So any patch making an internal API change should be +accompanied by a description of what the change is and why it is +necessary. This kind of change should also be broken out into a separate +patch, rather than buried within a larger patch. + +The other catch is that a developer who changes an internal API is +generally charged with the task of fixing any code within the kernel tree +which is broken by the change. For a widely-used function, this duty can +lead to literally hundreds or thousands of changes - many of which are +likely to conflict with work being done by other developers. Needless to +say, this can be a large job, so it is best to be sure that the +justification is solid. + +When making an incompatible API change, one should, whenever possible, +ensure that code which has not been updated is caught by the compiler. +This will help you to be sure that you have found all in-tree uses of that +interface. It will also alert developers of out-of-tree code that there is +a change that they need to respond to. Supporting out-of-tree code is not +something that kernel developers need to be worried about, but we also do +not have to make life harder for out-of-tree developers than it it needs to +be. diff --git a/Documentation/development-process/5.Posting b/Documentation/development-process/5.Posting new file mode 100644 index 00000000000..dd48132a74d --- /dev/null +++ b/Documentation/development-process/5.Posting @@ -0,0 +1,278 @@ +5: POSTING PATCHES + +Sooner or later, the time comes when your work is ready to be presented to +the community for review and, eventually, inclusion into the mainline +kernel. Unsurprisingly, the kernel development community has evolved a set +of conventions and procedures which are used in the posting of patches; +following them will make life much easier for everybody involved. This +document will attempt to cover these expectations in reasonable detail; +more information can also be found in the files SubmittingPatches, +SubmittingDrivers, and SubmitChecklist in the kernel documentation +directory. + + +5.1: WHEN TO POST + +There is a constant temptation to avoid posting patches before they are +completely "ready." For simple patches, that is not a problem. If the +work being done is complex, though, there is a lot to be gained by getting +feedback from the community before the work is complete. So you should +consider posting in-progress work, or even making a git tree available so +that interested developers can catch up with your work at any time. + +When posting code which is not yet considered ready for inclusion, it is a +good idea to say so in the posting itself. Also mention any major work +which remains to be done and any known problems. Fewer people will look at +patches which are known to be half-baked, but those who do will come in +with the idea that they can help you drive the work in the right direction. + + +5.2: BEFORE CREATING PATCHES + +There are a number of things which should be done before you consider +sending patches to the development community. These include: + + - Test the code to the extent that you can. Make use of the kernel's + debugging tools, ensure that the kernel will build with all reasonable + combinations of configuration options, use cross-compilers to build for + different architectures, etc. + + - Make sure your code is compliant with the kernel coding style + guidelines. + + - Does your change have performance implications? If so, you should run + benchmarks showing what the impact (or benefit) of your change is; a + summary of the results should be included with the patch. + + - Be sure that you have the right to post the code. If this work was done + for an employer, the employer likely has a right to the work and must be + agreeable with its release under the GPL. + +As a general rule, putting in some extra thought before posting code almost +always pays back the effort in short order. + + +5.3: PATCH PREPARATION + +The preparation of patches for posting can be a surprising amount of work, +but, once again, attempting to save time here is not generally advisable +even in the short term. + +Patches must be prepared against a specific version of the kernel. As a +general rule, a patch should be based on the current mainline as found in +Linus's git tree. It may become necessary to make versions against -mm, +linux-next, or a subsystem tree, though, to facilitate wider testing and +review. Depending on the area of your patch and what is going on +elsewhere, basing a patch against these other trees can require a +significant amount of work resolving conflicts and dealing with API +changes. + +Only the most simple changes should be formatted as a single patch; +everything else should be made as a logical series of changes. Splitting +up patches is a bit of an art; some developers spend a long time figuring +out how to do it in the way that the community expects. There are a few +rules of thumb, however, which can help considerably: + + - The patch series you post will almost certainly not be the series of + changes found in your working revision control system. Instead, the + changes you have made need to be considered in their final form, then + split apart in ways which make sense. The developers are interested in + discrete, self-contained changes, not the path you took to get to those + changes. + + - Each logically independent change should be formatted as a separate + patch. These changes can be small ("add a field to this structure") or + large (adding a significant new driver, for example), but they should be + conceptually small and amenable to a one-line description. Each patch + should make a specific change which can be reviewed on its own and + verified to do what it says it does. + + - As a way of restating the guideline above: do not mix different types of + changes in the same patch. If a single patch fixes a critical security + bug, rearranges a few structures, and reformats the code, there is a + good chance that it will be passed over and the important fix will be + lost. + + - Each patch should yield a kernel which builds and runs properly; if your + patch series is interrupted in the middle, the result should still be a + working kernel. Partial application of a patch series is a common + scenario when the "git bisect" tool is used to find regressions; if the + result is a broken kernel, you will make life harder for developers and + users who are engaging in the noble work of tracking down problems. + + - Do not overdo it, though. One developer recently posted a set of edits + to a single file as 500 separate patches - an act which did not make him + the most popular person on the kernel mailing list. A single patch can + be reasonably large as long as it still contains a single *logical* + change. + + - It can be tempting to add a whole new infrastructure with a series of + patches, but to leave that infrastructure unused until the final patch + in the series enables the whole thing. This temptation should be + avoided if possible; if that series adds regressions, bisection will + finger the last patch as the one which caused the problem, even though + the real bug is elsewhere. Whenever possible, a patch which adds new + code should make that code active immediately. + +Working to create the perfect patch series can be a frustrating process +which takes quite a bit of time and thought after the "real work" has been +done. When done properly, though, it is time well spent. + + +5.4: PATCH FORMATTING + +So now you have a perfect series of patches for posting, but the work is +not done quite yet. Each patch needs to be formatted into a message which +quickly and clearly communicates its purpose to the rest of the world. To +that end, each patch will be composed of the following: + + - An optional "From" line naming the author of the patch. This line is + only necessary if you are passing on somebody else's patch via email, + but it never hurts to add it when in doubt. + + - A one-line description of what the patch does. This message should be + enough for a reader who sees it with no other context to figure out the + scope of the patch; it is the line that will show up in the "short form" + changelogs. This message is usually formatted with the relevant + subsystem name first, followed by the purpose of the patch. For + example: + + gpio: fix build on CONFIG_GPIO_SYSFS=n + + - A blank line followed by a detailed description of the contents of the + patch. This description can be as long as is required; it should say + what the patch does and why it should be applied to the kernel. + + - One or more tag lines, with, at a minimum, one Signed-off-by: line from + the author of the patch. Tags will be described in more detail below. + +The above three items should, normally, be the text used when committing +the change to a revision control system. They are followed by: + + - The patch itself, in the unified ("-u") patch format. Using the "-p" + option to diff will associate function names with changes, making the + resulting patch easier for others to read. + +You should avoid including changes to irrelevant files (those generated by +the build process, for example, or editor backup files) in the patch. The +file "dontdiff" in the Documentation directory can help in this regard; +pass it to diff with the "-X" option. + +The tags mentioned above are used to describe how various developers have +been associated with the development of this patch. They are described in +detail in the SubmittingPatches document; what follows here is a brief +summary. Each of these lines has the format: + + tag: Full Name optional-other-stuff + +The tags in common use are: + + - Signed-off-by: this is a developer's certification that he or she has + the right to submit the patch for inclusion into the kernel. It is an + agreement to the Developer's Certificate of Origin, the full text of + which can be found in Documentation/SubmittingPatches. Code without a + proper signoff cannot be merged into the mainline. + + - Acked-by: indicates an agreement by another developer (often a + maintainer of the relevant code) that the patch is appropriate for + inclusion into the kernel. + + - Tested-by: states that the named person has tested the patch and found + it to work. + + - Reviewed-by: the named developer has reviewed the patch for correctness; + see the reviewer's statement in Documentation/SubmittingPatches for more + detail. + + - Reported-by: names a user who reported a problem which is fixed by this + patch; this tag is used to give credit to the (often underappreciated) + people who test our code and let us know when things do not work + correctly. + + - Cc: the named person received a copy of the patch and had the + opportunity to comment on it. + +Be careful in the addition of tags to your patches: only Cc: is appropriate +for addition without the explicit permission of the person named. + + +5.5: SENDING THE PATCH + +Before you mail your patches, there are a couple of other things you should +take care of: + + - Are you sure that your mailer will not corrupt the patches? Patches + which have had gratuitous white-space changes or line wrapping performed + by the mail client will not apply at the other end, and often will not + be examined in any detail. If there is any doubt at all, mail the patch + to yourself and convince yourself that it shows up intact. + + Documentation/email-clients.txt has some helpful hints on making + specific mail clients work for sending patches. + + - Are you sure your patch is free of silly mistakes? You should always + run patches through scripts/checkpatch.pl and address the complaints it + comes up with. Please bear in mind that checkpatch.pl, while being the + embodiment of a fair amount of thought about what kernel patches should + look like, is not smarter than you. If fixing a checkpatch.pl complaint + would make the code worse, don't do it. + +Patches should always be sent as plain text. Please do not send them as +attachments; that makes it much harder for reviewers to quote sections of +the patch in their replies. Instead, just put the patch directly into your +message. + +When mailing patches, it is important to send copies to anybody who might +be interested in it. Unlike some other projects, the kernel encourages +people to err on the side of sending too many copies; don't assume that the +relevant people will see your posting on the mailing lists. In particular, +copies should go to: + + - The maintainer(s) of the affected subsystem(s). As described earlier, + the MAINTAINERS file is the first place to look for these people. + + - Other developers who have been working in the same area - especially + those who might be working there now. Using git to see who else has + modified the files you are working on can be helpful. + + - If you are responding to a bug report or a feature request, copy the + original poster as well. + + - Send a copy to the relevant mailing list, or, if nothing else applies, + the linux-kernel list. + + - If you are fixing a bug, think about whether the fix should go into the + next stable update. If so, stable@kernel.org should get a copy of the + patch. Also add a "Cc: stable@kernel.org" to the tags within the patch + itself; that will cause the stable team to get a notification when your + fix goes into the mainline. + +When selecting recipients for a patch, it is good to have an idea of who +you think will eventually accept the patch and get it merged. While it +is possible to send patches directly to Linus Torvalds and have him merge +them, things are not normally done that way. Linus is busy, and there are +subsystem maintainers who watch over specific parts of the kernel. Usually +you will be wanting that maintainer to merge your patches. If there is no +obvious maintainer, Andrew Morton is often the patch target of last resort. + +Patches need good subject lines. The canonical format for a patch line is +something like: + + [PATCH nn/mm] subsys: one-line description of the patch + +where "nn" is the ordinal number of the patch, "mm" is the total number of +patches in the series, and "subsys" is the name of the affected subsystem. +Clearly, nn/mm can be omitted for a single, standalone patch. + +If you have a significant series of patches, it is customary to send an +introductory description as part zero. This convention is not universally +followed though; if you use it, remember that information in the +introduction does not make it into the kernel changelogs. So please ensure +that the patches, themselves, have complete changelog information. + +In general, the second and following parts of a multi-part patch should be +sent as a reply to the first part so that they all thread together at the +receiving end. Tools like git and quilt have commands to mail out a set of +patches with the proper threading. If you have a long series, though, and +are using git, please provide the --no-chain-reply-to option to avoid +creating exceptionally deep nesting. diff --git a/Documentation/development-process/6.Followthrough b/Documentation/development-process/6.Followthrough new file mode 100644 index 00000000000..a8fba3d83a8 --- /dev/null +++ b/Documentation/development-process/6.Followthrough @@ -0,0 +1,202 @@ +6: FOLLOWTHROUGH + +At this point, you have followed the guidelines given so far and, with the +addition of your own engineering skills, have posted a perfect series of +patches. One of the biggest mistakes that even experienced kernel +developers can make is to conclude that their work is now done. In truth, +posting patches indicates a transition into the next stage of the process, +with, possibly, quite a bit of work yet to be done. + +It is a rare patch which is so good at its first posting that there is no +room for improvement. The kernel development process recognizes this fact, +and, as a result, is heavily oriented toward the improvement of posted +code. You, as the author of that code, will be expected to work with the +kernel community to ensure that your code is up to the kernel's quality +standards. A failure to participate in this process is quite likely to +prevent the inclusion of your patches into the mainline. + + +6.1: WORKING WITH REVIEWERS + +A patch of any significance will result in a number of comments from other +developers as they review the code. Working with reviewers can be, for +many developers, the most intimidating part of the kernel development +process. Life can be made much easier, though, if you keep a few things in +mind: + + - If you have explained your patch well, reviewers will understand its + value and why you went to the trouble of writing it. But that value + will not keep them from asking a fundamental question: what will it be + like to maintain a kernel with this code in it five or ten years later? + Many of the changes you may be asked to make - from coding style tweaks + to substantial rewrites - come from the understanding that Linux will + still be around and under development a decade from now. + + - Code review is hard work, and it is a relatively thankless occupation; + people remember who wrote kernel code, but there is little lasting fame + for those who reviewed it. So reviewers can get grumpy, especially when + they see the same mistakes being made over and over again. If you get a + review which seems angry, insulting, or outright offensive, resist the + impulse to respond in kind. Code review is about the code, not about + the people, and code reviewers are not attacking you personally. + + - Similarly, code reviewers are not trying to promote their employers' + agendas at the expense of your own. Kernel developers often expect to + be working on the kernel years from now, but they understand that their + employer could change. They truly are, almost without exception, + working toward the creation of the best kernel they can; they are not + trying to create discomfort for their employers' competitors. + +What all of this comes down to is that, when reviewers send you comments, +you need to pay attention to the technical observations that they are +making. Do not let their form of expression or your own pride keep that +from happening. When you get review comments on a patch, take the time to +understand what the reviewer is trying to say. If possible, fix the things +that the reviewer is asking you to fix. And respond back to the reviewer: +thank them, and describe how you will answer their questions. + +Note that you do not have to agree with every change suggested by +reviewers. If you believe that the reviewer has misunderstood your code, +explain what is really going on. If you have a technical objection to a +suggested change, describe it and justify your solution to the problem. If +your explanations make sense, the reviewer will accept them. Should your +explanation not prove persuasive, though, especially if others start to +agree with the reviewer, take some time to think things over again. It can +be easy to become blinded by your own solution to a problem to the point +that you don't realize that something is fundamentally wrong or, perhaps, +you're not even solving the right problem. + +One fatal mistake is to ignore review comments in the hope that they will +go away. They will not go away. If you repost code without having +responded to the comments you got the time before, you're likely to find +that your patches go nowhere. + +Speaking of reposting code: please bear in mind that reviewers are not +going to remember all the details of the code you posted the last time +around. So it is always a good idea to remind reviewers of previously +raised issues and how you dealt with them; the patch changelog is a good +place for this kind of information. Reviewers should not have to search +through list archives to familiarize themselves with what was said last +time; if you help them get a running start, they will be in a better mood +when they revisit your code. + +What if you've tried to do everything right and things still aren't going +anywhere? Most technical disagreements can be resolved through discussion, +but there are times when somebody simply has to make a decision. If you +honestly believe that this decision is going against you wrongly, you can +always try appealing to a higher power. As of this writing, that higher +power tends to be Andrew Morton. Andrew has a great deal of respect in the +kernel development community; he can often unjam a situation which seems to +be hopelessly blocked. Appealing to Andrew should not be done lightly, +though, and not before all other alternatives have been explored. And bear +in mind, of course, that he may not agree with you either. + + +6.2: WHAT HAPPENS NEXT + +If a patch is considered to be a good thing to add to the kernel, and once +most of the review issues have been resolved, the next step is usually +entry into a subsystem maintainer's tree. How that works varies from one +subsystem to the next; each maintainer has his or her own way of doing +things. In particular, there may be more than one tree - one, perhaps, +dedicated to patches planned for the next merge window, and another for +longer-term work. + +For patches applying to areas for which there is no obvious subsystem tree +(memory management patches, for example), the default tree often ends up +being -mm. Patches which affect multiple subsystems can also end up going +through the -mm tree. + +Inclusion into a subsystem tree can bring a higher level of visibility to a +patch. Now other developers working with that tree will get the patch by +default. Subsystem trees typically feed into -mm and linux-next as well, +making their contents visible to the development community as a whole. At +this point, there's a good chance that you will get more comments from a +new set of reviewers; these comments need to be answered as in the previous +round. + +What may also happen at this point, depending on the nature of your patch, +is that conflicts with work being done by others turn up. In the worst +case, heavy patch conflicts can result in some work being put on the back +burner so that the remaining patches can be worked into shape and merged. +Other times, conflict resolution will involve working with the other +developers and, possibly, moving some patches between trees to ensure that +everything applies cleanly. This work can be a pain, but count your +blessings: before the advent of the linux-next tree, these conflicts often +only turned up during the merge window and had to be addressed in a hurry. +Now they can be resolved at leisure, before the merge window opens. + +Some day, if all goes well, you'll log on and see that your patch has been +merged into the mainline kernel. Congratulations! Once the celebration is +complete (and you have added yourself to the MAINTAINERS file), though, it +is worth remembering an important little fact: the job still is not done. +Merging into the mainline brings its own challenges. + +To begin with, the visibility of your patch has increased yet again. There +may be a new round of comments from developers who had not been aware of +the patch before. It may be tempting to ignore them, since there is no +longer any question of your code being merged. Resist that temptation, +though; you still need to be responsive to developers who have questions or +suggestions. + +More importantly, though: inclusion into the mainline puts your code into +the hands of a much larger group of testers. Even if you have contributed +a driver for hardware which is not yet available, you will be surprised by +how many people will build your code into their kernels. And, of course, +where there are testers, there will be bug reports. + +The worst sort of bug reports are regressions. If your patch causes a +regression, you'll find an uncomfortable number of eyes upon you; +regressions need to be fixed as soon as possible. If you are unwilling or +unable to fix the regression (and nobody else does it for you), your patch +will almost certainly be removed during the stabilization period. Beyond +negating all of the work you have done to get your patch into the mainline, +having a patch pulled as the result of a failure to fix a regression could +well make it harder for you to get work merged in the future. + +After any regressions have been dealt with, there may be other, ordinary +bugs to deal with. The stabilization period is your best opportunity to +fix these bugs and ensure that your code's debut in a mainline kernel +release is as solid as possible. So, please, answer bug reports, and fix +the problems if at all possible. That's what the stabilization period is +for; you can start creating cool new patches once any problems with the old +ones have been taken care of. + +And don't forget that there are other milestones which may also create bug +reports: the next mainline stable release, when prominent distributors pick +up a version of the kernel containing your patch, etc. Continuing to +respond to these reports is a matter of basic pride in your work. If that +is insufficient motivation, though, it's also worth considering that the +development community remembers developers who lose interest in their code +after it's merged. The next time you post a patch, they will be evaluating +it with the assumption that you will not be around to maintain it +afterward. + + +6.3: OTHER THINGS THAT CAN HAPPEN + +One day, you may open your mail client and see that somebody has mailed you +a patch to your code. That is one of the advantages of having your code +out there in the open, after all. If you agree with the patch, you can +either forward it on to the subsystem maintainer (be sure to include a +proper From: line so that the attribution is correct, and add a signoff of +your own), or send an Acked-by: response back and let the original poster +send it upward. + +If you disagree with the patch, send a polite response explaining why. If +possible, tell the author what changes need to be made to make the patch +acceptable to you. There is a certain resistance to merging patches which +are opposed by the author and maintainer of the code, but it only goes so +far. If you are seen as needlessly blocking good work, those patches will +eventually flow around you and get into the mainline anyway. In the Linux +kernel, nobody has absolute veto power over any code. Except maybe Linus. + +On very rare occasion, you may see something completely different: another +developer posts a different solution to your problem. At that point, +chances are that one of the two patches will not be merged, and "mine was +here first" is not considered to be a compelling technical argument. If +somebody else's patch displaces yours and gets into the mainline, there is +really only one way to respond: be pleased that your problem got solved and +get on with your work. Having one's work shoved aside in this manner can +be hurtful and discouraging, but the community will remember your reaction +long after they have forgotten whose patch actually got merged. diff --git a/Documentation/development-process/7.AdvancedTopics b/Documentation/development-process/7.AdvancedTopics new file mode 100644 index 00000000000..a2cf74093aa --- /dev/null +++ b/Documentation/development-process/7.AdvancedTopics @@ -0,0 +1,173 @@ +7: ADVANCED TOPICS + +At this point, hopefully, you have a handle on how the development process +works. There is still more to learn, however! This section will cover a +number of topics which can be helpful for developers wanting to become a +regular part of the Linux kernel development process. + +7.1: MANAGING PATCHES WITH GIT + +The use of distributed version control for the kernel began in early 2002, +when Linus first started playing with the proprietary BitKeeper +application. While BitKeeper was controversial, the approach to software +version management it embodied most certainly was not. Distributed version +control enabled an immediate acceleration of the kernel development +project. In current times, there are several free alternatives to +BitKeeper. For better or for worse, the kernel project has settled on git +as its tool of choice. + +Managing patches with git can make life much easier for the developer, +especially as the volume of those patches grows. Git also has its rough +edges and poses certain hazards; it is a young and powerful tool which is +still being civilized by its developers. This document will not attempt to +teach the reader how to use git; that would be sufficient material for a +long document in its own right. Instead, the focus here will be on how git +fits into the kernel development process in particular. Developers who +wish to come up to speed with git will find more information at: + + http://git.or.cz/ + + http://www.kernel.org/pub/software/scm/git/docs/user-manual.html + +and on various tutorials found on the web. + +The first order of business is to read the above sites and get a solid +understanding of how git works before trying to use it to make patches +available to others. A git-using developer should be able to obtain a copy +of the mainline repository, explore the revision history, commit changes to +the tree, use branches, etc. An understanding of git's tools for the +rewriting of history (such as rebase) is also useful. Git comes with its +own terminology and concepts; a new user of git should know about refs, +remote branches, the index, fast-forward merges, pushes and pulls, detached +heads, etc. It can all be a little intimidating at the outset, but the +concepts are not that hard to grasp with a bit of study. + +Using git to generate patches for submission by email can be a good +exercise while coming up to speed. + +When you are ready to start putting up git trees for others to look at, you +will, of course, need a server that can be pulled from. Setting up such a +server with git-daemon is relatively straightforward if you have a system +which is accessible to the Internet. Otherwise, free, public hosting sites +(Github, for example) are starting to appear on the net. Established +developers can get an account on kernel.org, but those are not easy to come +by; see http://kernel.org/faq/ for more information. + +The normal git workflow involves the use of a lot of branches. Each line +of development can be separated into a separate "topic branch" and +maintained independently. Branches in git are cheap, there is no reason to +not make free use of them. And, in any case, you should not do your +development in any branch which you intend to ask others to pull from. +Publicly-available branches should be created with care; merge in patches +from development branches when they are in complete form and ready to go - +not before. + +Git provides some powerful tools which can allow you to rewrite your +development history. An inconvenient patch (one which breaks bisection, +say, or which has some other sort of obvious bug) can be fixed in place or +made to disappear from the history entirely. A patch series can be +rewritten as if it had been written on top of today's mainline, even though +you have been working on it for months. Changes can be transparently +shifted from one branch to another. And so on. Judicious use of git's +ability to revise history can help in the creation of clean patch sets with +fewer problems. + +Excessive use of this capability can lead to other problems, though, beyond +a simple obsession for the creation of the perfect project history. +Rewriting history will rewrite the changes contained in that history, +turning a tested (hopefully) kernel tree into an untested one. But, beyond +that, developers cannot easily collaborate if they do not have a shared +view of the project history; if you rewrite history which other developers +have pulled into their repositories, you will make life much more difficult +for those developers. So a simple rule of thumb applies here: history +which has been exported to others should generally be seen as immutable +thereafter. + +So, once you push a set of changes to your publicly-available server, those +changes should not be rewritten. Git will attempt to enforce this rule if +you try to push changes which do not result in a fast-forward merge +(i.e. changes which do not share the same history). It is possible to +override this check, and there may be times when it is necessary to rewrite +an exported tree. Moving changesets between trees to avoid conflicts in +linux-next is one example. But such actions should be rare. This is one +of the reasons why development should be done in private branches (which +can be rewritten if necessary) and only moved into public branches when +it's in a reasonably advanced state. + +As the mainline (or other tree upon which a set of changes is based) +advances, it is tempting to merge with that tree to stay on the leading +edge. For a private branch, rebasing can be an easy way to keep up with +another tree, but rebasing is not an option once a tree is exported to the +world. Once that happens, a full merge must be done. Merging occasionally +makes good sense, but overly frequent merges can clutter the history +needlessly. Suggested technique in this case is to merge infrequently, and +generally only at specific release points (such as a mainline -rc +release). If you are nervous about specific changes, you can always +perform test merges in a private branch. The git "rerere" tool can be +useful in such situations; it remembers how merge conflicts were resolved +so that you don't have to do the same work twice. + +One of the biggest recurring complaints about tools like git is this: the +mass movement of patches from one repository to another makes it easy to +slip in ill-advised changes which go into the mainline below the review +radar. Kernel developers tend to get unhappy when they see that kind of +thing happening; putting up a git tree with unreviewed or off-topic patches +can affect your ability to get trees pulled in the future. Quoting Linus: + + You can send me patches, but for me to pull a git patch from you, I + need to know that you know what you're doing, and I need to be able + to trust things *without* then having to go and check every + individual change by hand. + +(http://lwn.net/Articles/224135/). + +To avoid this kind of situation, ensure that all patches within a given +branch stick closely to the associated topic; a "driver fixes" branch +should not be making changes to the core memory management code. And, most +importantly, do not use a git tree to bypass the review process. Post an +occasional summary of the tree to the relevant list, and, when the time is +right, request that the tree be included in linux-next. + +If and when others start to send patches for inclusion into your tree, +don't forget to review them. Also ensure that you maintain the correct +authorship information; the git "am" tool does its best in this regard, but +you may have to add a "From:" line to the patch if it has been relayed to +you via a third party. + +When requesting a pull, be sure to give all the relevant information: where +your tree is, what branch to pull, and what changes will result from the +pull. The git request-pull command can be helpful in this regard; it will +format the request as other developers expect, and will also check to be +sure that you have remembered to push those changes to the public server. + + +7.2: REVIEWING PATCHES + +Some readers will certainly object to putting this section with "advanced +topics" on the grounds that even beginning kernel developers should be +reviewing patches. It is certainly true that there is no better way to +learn how to program in the kernel environment than by looking at code +posted by others. In addition, reviewers are forever in short supply; by +looking at code you can make a significant contribution to the process as a +whole. + +Reviewing code can be an intimidating prospect, especially for a new kernel +developer who may well feel nervous about questioning code - in public - +which has been posted by those with more experience. Even code written by +the most experienced developers can be improved, though. Perhaps the best +piece of advice for reviewers (all reviewers) is this: phrase review +comments as questions rather than criticisms. Asking "how does the lock +get released in this path?" will always work better than stating "the +locking here is wrong." + +Different developers will review code from different points of view. Some +are mostly concerned with coding style and whether code lines have trailing +white space. Others will focus primarily on whether the change implemented +by the patch as a whole is a good thing for the kernel or not. Yet others +will check for problematic locking, excessive stack usage, possible +security issues, duplication of code found elsewhere, adequate +documentation, adverse effects on performance, user-space ABI changes, etc. +All types of review, if they lead to better code going into the kernel, are +welcome and worthwhile. + + diff --git a/Documentation/development-process/8.Conclusion b/Documentation/development-process/8.Conclusion new file mode 100644 index 00000000000..1990ab4b494 --- /dev/null +++ b/Documentation/development-process/8.Conclusion @@ -0,0 +1,74 @@ +8: FOR MORE INFORMATION + +There are numerous sources of information on Linux kernel development and +related topics. First among those will always be the Documentation +directory found in the kernel source distribution. The top-level HOWTO +file is an important starting point; SubmittingPatches and +SubmittingDrivers are also something which all kernel developers should +read. Many internal kernel APIs are documented using the kerneldoc +mechanism; "make htmldocs" or "make pdfdocs" can be used to generate those +documents in HTML or PDF format (though the version of TeX shipped by some +distributions runs into internal limits and fails to process the documents +properly). + +Various web sites discuss kernel development at all levels of detail. Your +author would like to humbly suggest http://lwn.net/ as a source; +information on many specific kernel topics can be found via the LWN kernel +index at: + + http://lwn.net/Kernel/Index/ + +Beyond that, a valuable resource for kernel developers is: + + http://kernelnewbies.org/ + +Information about the linux-next tree gathers at: + + http://linux.f-seidel.de/linux-next/pmwiki/ + +And, of course, one should not forget http://kernel.org/, the definitive +location for kernel release information. + +There are a number of books on kernel development: + + Linux Device Drivers, 3rd Edition (Jonathan Corbet, Alessandro + Rubini, and Greg Kroah-Hartman). Online at + http://lwn.net/Kernel/LDD3/. + + Linux Kernel Development (Robert Love). + + Understanding the Linux Kernel (Daniel Bovet and Marco Cesati). + +All of these books suffer from a common fault, though: they tend to be +somewhat obsolete by the time they hit the shelves, and they have been on +the shelves for a while now. Still, there is quite a bit of good +information to be found there. + +Documentation for git can be found at: + + http://www.kernel.org/pub/software/scm/git/docs/ + + http://www.kernel.org/pub/software/scm/git/docs/user-manual.html + + +9: CONCLUSION + +Congratulations to anybody who has made it through this long-winded +document. Hopefully it has provided a helpful understanding of how the +Linux kernel is developed and how you can participate in that process. + +In the end, it's the participation that matters. Any open source software +project is no more than the sum of what its contributors put into it. The +Linux kernel has progressed as quickly and as well as it has because it has +been helped by an impressively large group of developers, all of whom are +working to make it better. The kernel is a premier example of what can be +done when thousands of people work together toward a common goal. + +The kernel can always benefit from a larger developer base, though. There +is always more work to do. But, just as importantly, most other +participants in the Linux ecosystem can benefit through contributing to the +kernel. Getting code into the mainline is the key to higher code quality, +lower maintenance and distribution costs, a higher level of influence over +the direction of kernel development, and more. It is a situation where +everybody involved wins. Fire up your editor and come join us; you will be +more than welcome. -- cgit v1.2.3-70-g09d2 From 58bae1f5cfd077f7f5f3af5d1ac50c3a82ac6411 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Tue, 13 May 2008 13:36:55 +0900 Subject: doc: Test-by? Commonly used is "Tested-by." Signed-off-by: Hidetoshi Seto Signed-off-by: Jonathan Corbet --- Documentation/SubmittingPatches | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index f79ad9ff603..0d601cba969 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -405,7 +405,7 @@ person it names. This tag documents that potentially interested parties have been included in the discussion -14) Using Test-by: and Reviewed-by: +14) Using Tested-by: and Reviewed-by: A Tested-by: tag indicates that the patch has been successfully tested (in some environment) by the person named. This tag informs maintainers that -- cgit v1.2.3-70-g09d2 From 7e3975617df8dd8b7fd94f14200abdec9f71729e Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 16 Oct 2008 11:53:20 -0600 Subject: Remove videobook.tmpl This document describes the long-deprecated V4L1 interface. In-tree, it can only serve to encourage developers to write drivers to the wrong API. Remove it in favor of the V4L2 documentation which must surely show up someday. Acked-by: Alan Cox Acked-by: Mauro Carvalho Chehab Signed-off-by: Jonathan Corbet --- Documentation/DocBook/Makefile | 2 +- Documentation/DocBook/videobook.tmpl | 1654 ---------------------------------- 2 files changed, 1 insertion(+), 1655 deletions(-) delete mode 100644 Documentation/DocBook/videobook.tmpl (limited to 'Documentation') diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 1615350b7b5..fabc06466b9 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -6,7 +6,7 @@ # To add a new book the only step required is to add the book to the # list of DOCBOOKS. -DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ +DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml \ kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ procfs-guide.xml writing_usb_driver.xml networking.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl deleted file mode 100644 index 0bc25949b66..00000000000 --- a/Documentation/DocBook/videobook.tmpl +++ /dev/null @@ -1,1654 +0,0 @@ - - - - - - Video4Linux Programming - - - - Alan - Cox - -
- alan@redhat.com -
- - - - - - 2000 - Alan Cox - - - - - This documentation is free software; you can redistribute - it and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2 of the License, or (at your option) any later - version. - - - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - - - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - - - - For more details see the file COPYING in the source - distribution of Linux. - - - - - - - - Introduction - - Parts of this document first appeared in Linux Magazine under a - ninety day exclusivity. - - - Video4Linux is intended to provide a common programming interface - for the many TV and capture cards now on the market, as well as - parallel port and USB video cameras. Radio, teletext decoders and - vertical blanking data interfaces are also provided. - - - - Radio Devices - - There are a wide variety of radio interfaces available for PC's, and these - are generally very simple to program. The biggest problem with supporting - such devices is normally extracting documentation from the vendor. - - - The radio interface supports a simple set of control ioctls standardised - across all radio and tv interfaces. It does not support read or write, which - are used for video streams. The reason radio cards do not allow you to read - the audio stream into an application is that without exception they provide - a connection on to a soundcard. Soundcards can be used to read the radio - data just fine. - - - Registering Radio Devices - - The Video4linux core provides an interface for registering devices. The - first step in writing our radio card driver is to register it. - - - - -static struct video_device my_radio -{ - "My radio", - VID_TYPE_TUNER, - radio_open. - radio_close, - NULL, /* no read */ - NULL, /* no write */ - NULL, /* no poll */ - radio_ioctl, - NULL, /* no special init function */ - NULL /* no private data */ -}; - - - - - This declares our video4linux device driver interface. The VID_TYPE_ value - defines what kind of an interface we are, and defines basic capabilities. - - - The only defined value relevant for a radio card is VID_TYPE_TUNER which - indicates that the device can be tuned. Clearly our radio is going to have some - way to change channel so it is tuneable. - - - We declare an open and close routine, but we do not need read or write, - which are used to read and write video data to or from the card itself. As - we have no read or write there is no poll function. - - - The private initialise function is run when the device is registered. In - this driver we've already done all the work needed. The final pointer is a - private data pointer that can be used by the device driver to attach and - retrieve private data structures. We set this field "priv" to NULL for - the moment. - - - Having the structure defined is all very well but we now need to register it - with the kernel. - - - - -static int io = 0x320; - -int __init myradio_init(struct video_init *v) -{ - if(!request_region(io, MY_IO_SIZE, "myradio")) - { - printk(KERN_ERR - "myradio: port 0x%03X is in use.\n", io); - return -EBUSY; - } - - if(video_device_register(&my_radio, VFL_TYPE_RADIO)==-1) { - release_region(io, MY_IO_SIZE); - return -EINVAL; - } - return 0; -} - - - - The first stage of the initialisation, as is normally the case, is to check - that the I/O space we are about to fiddle with doesn't belong to some other - driver. If it is we leave well alone. If the user gives the address of the - wrong device then we will spot this. These policies will generally avoid - crashing the machine. - - - Now we ask the Video4Linux layer to register the device for us. We hand it - our carefully designed video_device structure and also tell it which group - of devices we want it registered with. In this case VFL_TYPE_RADIO. - - - The types available are - - Device Types - - - - VFL_TYPE_RADIO/dev/radio{n} - - Radio devices are assigned in this block. As with all of these - selections the actual number assignment is done by the video layer - accordijng to what is free. - - VFL_TYPE_GRABBER/dev/video{n} - Video capture devices and also -- counter-intuitively for the name -- - hardware video playback devices such as MPEG2 cards. - - VFL_TYPE_VBI/dev/vbi{n} - The VBI devices capture the hidden lines on a television picture - that carry further information like closed caption data, teletext - (primarily in Europe) and now Intercast and the ATVEC internet - television encodings. - - VFL_TYPE_VTX/dev/vtx[n} - VTX is 'Videotext' also known as 'Teletext'. This is a system for - sending numbered, 40x25, mostly textual page images over the hidden - lines. Unlike the /dev/vbi interfaces, this is for 'smart' decoder - chips. (The use of the word smart here has to be taken in context, - the smartest teletext chips are fairly dumb pieces of technology). - - - - -
- - We are most definitely a radio. - - - Finally we allocate our I/O space so that nobody treads on us and return 0 - to signify general happiness with the state of the universe. - - - - Opening And Closing The Radio - - - The functions we declared in our video_device are mostly very simple. - Firstly we can drop in what is basically standard code for open and close. - - - - -static int users = 0; - -static int radio_open(struct video_device *dev, int flags) -{ - if(users) - return -EBUSY; - users++; - return 0; -} - - - - At open time we need to do nothing but check if someone else is also using - the radio card. If nobody is using it we make a note that we are using it, - then we ensure that nobody unloads our driver on us. - - - - -static int radio_close(struct video_device *dev) -{ - users--; -} - - - - At close time we simply need to reduce the user count and allow the module - to become unloadable. - - - If you are sharp you will have noticed neither the open nor the close - routines attempt to reset or change the radio settings. This is intentional. - It allows an application to set up the radio and exit. It avoids a user - having to leave an application running all the time just to listen to the - radio. - - - - The Ioctl Interface - - This leaves the ioctl routine, without which the driver will not be - terribly useful to anyone. - - - - -static int radio_ioctl(struct video_device *dev, unsigned int cmd, void *arg) -{ - switch(cmd) - { - case VIDIOCGCAP: - { - struct video_capability v; - v.type = VID_TYPE_TUNER; - v.channels = 1; - v.audios = 1; - v.maxwidth = 0; - v.minwidth = 0; - v.maxheight = 0; - v.minheight = 0; - strcpy(v.name, "My Radio"); - if(copy_to_user(arg, &v, sizeof(v))) - return -EFAULT; - return 0; - } - - - - VIDIOCGCAP is the first ioctl all video4linux devices must support. It - allows the applications to find out what sort of a card they have found and - to figure out what they want to do about it. The fields in the structure are - - struct video_capability fields - - - - nameThe device text name. This is intended for the user. - - channelsThe number of different channels you can tune on - this card. It could even by zero for a card that has - no tuning capability. For our simple FM radio it is 1. - An AM/FM radio would report 2. - - audiosThe number of audio inputs on this device. For our - radio there is only one audio input. - - minwidth,minheightThe smallest size the card is capable of capturing - images in. We set these to zero. Radios do not - capture pictures - - maxwidth,maxheightThe largest image size the card is capable of - capturing. For our radio we report 0. - - - typeThis reports the capabilities of the device, and - matches the field we filled in in the struct - video_device when registering. - - - -
- - Having filled in the fields, we use copy_to_user to copy the structure into - the users buffer. If the copy fails we return an EFAULT to the application - so that it knows it tried to feed us garbage. - - - The next pair of ioctl operations select which tuner is to be used and let - the application find the tuner properties. We have only a single FM band - tuner in our example device. - - - - - case VIDIOCGTUNER: - { - struct video_tuner v; - if(copy_from_user(&v, arg, sizeof(v))!=0) - return -EFAULT; - if(v.tuner) - return -EINVAL; - v.rangelow=(87*16000); - v.rangehigh=(108*16000); - v.flags = VIDEO_TUNER_LOW; - v.mode = VIDEO_MODE_AUTO; - v.signal = 0xFFFF; - strcpy(v.name, "FM"); - if(copy_to_user(&v, arg, sizeof(v))!=0) - return -EFAULT; - return 0; - } - - - - The VIDIOCGTUNER ioctl allows applications to query a tuner. The application - sets the tuner field to the tuner number it wishes to query. The query does - not change the tuner that is being used, it merely enquires about the tuner - in question. - - - We have exactly one tuner so after copying the user buffer to our temporary - structure we complain if they asked for a tuner other than tuner 0. - - - The video_tuner structure has the following fields - - struct video_tuner fields - - - - int tunerThe number of the tuner in question - - char name[32]A text description of this tuner. "FM" will do fine. - This is intended for the application. - - u32 flags - Tuner capability flags - - - u16 modeThe current reception mode - - - u16 signalThe signal strength scaled between 0 and 65535. If - a device cannot tell the signal strength it should - report 65535. Many simple cards contain only a - signal/no signal bit. Such cards will report either - 0 or 65535. - - - u32 rangelow, rangehigh - The range of frequencies supported by the radio - or TV. It is scaled according to the VIDEO_TUNER_LOW - flag. - - - - -
- - struct video_tuner flags - - - - VIDEO_TUNER_PALA PAL TV tuner - - VIDEO_TUNER_NTSCAn NTSC (US) TV tuner - - VIDEO_TUNER_SECAMA SECAM (French) TV tuner - - VIDEO_TUNER_LOW - The tuner frequency is scaled in 1/16th of a KHz - steps. If not it is in 1/16th of a MHz steps - - - VIDEO_TUNER_NORMThe tuner can set its format - - VIDEO_TUNER_STEREO_ONThe tuner is currently receiving a stereo signal - - - -
- - struct video_tuner modes - - - - VIDEO_MODE_PALPAL Format - - VIDEO_MODE_NTSCNTSC Format (USA) - - VIDEO_MODE_SECAMFrench Format - - VIDEO_MODE_AUTOA device that does not need to do - TV format switching - - - -
- - The settings for the radio card are thus fairly simple. We report that we - are a tuner called "FM" for FM radio. In order to get the best tuning - resolution we report VIDEO_TUNER_LOW and select tuning to 1/16th of KHz. Its - unlikely our card can do that resolution but it is a fair bet the card can - do better than 1/16th of a MHz. VIDEO_TUNER_LOW is appropriate to almost all - radio usage. - - - We report that the tuner automatically handles deciding what format it is - receiving - true enough as it only handles FM radio. Our example card is - also incapable of detecting stereo or signal strengths so it reports a - strength of 0xFFFF (maximum) and no stereo detected. - - - To finish off we set the range that can be tuned to be 87-108Mhz, the normal - FM broadcast radio range. It is important to find out what the card is - actually capable of tuning. It is easy enough to simply use the FM broadcast - range. Unfortunately if you do this you will discover the FM broadcast - ranges in the USA, Europe and Japan are all subtly different and some users - cannot receive all the stations they wish. - - - The application also needs to be able to set the tuner it wishes to use. In - our case, with a single tuner this is rather simple to arrange. - - - - case VIDIOCSTUNER: - { - struct video_tuner v; - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - if(v.tuner != 0) - return -EINVAL; - return 0; - } - - - - We copy the user supplied structure into kernel memory so we can examine it. - If the user has selected a tuner other than zero we reject the request. If - they wanted tuner 0 then, surprisingly enough, that is the current tuner already. - - - The next two ioctls we need to provide are to get and set the frequency of - the radio. These both use an unsigned long argument which is the frequency. - The scale of the frequency depends on the VIDEO_TUNER_LOW flag as I - mentioned earlier on. Since we have VIDEO_TUNER_LOW set this will be in - 1/16ths of a KHz. - - - -static unsigned long current_freq; - - - - case VIDIOCGFREQ: - if(copy_to_user(arg, &current_freq, - sizeof(unsigned long)) - return -EFAULT; - return 0; - - - - Querying the frequency in our case is relatively simple. Our radio card is - too dumb to let us query the signal strength so we remember our setting if - we know it. All we have to do is copy it to the user. - - - - - case VIDIOCSFREQ: - { - u32 freq; - if(copy_from_user(arg, &freq, - sizeof(unsigned long))!=0) - return -EFAULT; - if(hardware_set_freq(freq)<0) - return -EINVAL; - current_freq = freq; - return 0; - } - - - - Setting the frequency is a little more complex. We begin by copying the - desired frequency into kernel space. Next we call a hardware specific routine - to set the radio up. This might be as simple as some scaling and a few - writes to an I/O port. For most radio cards it turns out a good deal more - complicated and may involve programming things like a phase locked loop on - the card. This is what documentation is for. - - - The final set of operations we need to provide for our radio are the - volume controls. Not all radio cards can even do volume control. After all - there is a perfectly good volume control on the sound card. We will assume - our radio card has a simple 4 step volume control. - - - There are two ioctls with audio we need to support - - - -static int current_volume=0; - - case VIDIOCGAUDIO: - { - struct video_audio v; - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - if(v.audio != 0) - return -EINVAL; - v.volume = 16384*current_volume; - v.step = 16384; - strcpy(v.name, "Radio"); - v.mode = VIDEO_SOUND_MONO; - v.balance = 0; - v.base = 0; - v.treble = 0; - - if(copy_to_user(arg. &v, sizeof(v))) - return -EFAULT; - return 0; - } - - - - Much like the tuner we start by copying the user structure into kernel - space. Again we check if the user has asked for a valid audio input. We have - only input 0 and we punt if they ask for another input. - - - Then we fill in the video_audio structure. This has the following format - - struct video_audio fields - - - - audioThe input the user wishes to query - - volumeThe volume setting on a scale of 0-65535 - - baseThe base level on a scale of 0-65535 - - trebleThe treble level on a scale of 0-65535 - - flagsThe features this audio device supports - - - nameA text name to display to the user. We picked - "Radio" as it explains things quite nicely. - - modeThe current reception mode for the audio - - We report MONO because our card is too stupid to know if it is in - mono or stereo. - - - balanceThe stereo balance on a scale of 0-65535, 32768 is - middle. - - stepThe step by which the volume control jumps. This is - used to help make it easy for applications to set - slider behaviour. - - - -
- - struct video_audio flags - - - - VIDEO_AUDIO_MUTEThe audio is currently muted. We - could fake this in our driver but we - choose not to bother. - - VIDEO_AUDIO_MUTABLEThe input has a mute option - - VIDEO_AUDIO_TREBLEThe input has a treble control - - VIDEO_AUDIO_BASSThe input has a base control - - - -
- - struct video_audio modes - - - - VIDEO_SOUND_MONOMono sound - - VIDEO_SOUND_STEREOStereo sound - - VIDEO_SOUND_LANG1Alternative language 1 (TV specific) - - VIDEO_SOUND_LANG2Alternative language 2 (TV specific) - - - -
- - Having filled in the structure we copy it back to user space. - - - The VIDIOCSAUDIO ioctl allows the user to set the audio parameters in the - video_audio structure. The driver does its best to honour the request. - - - - case VIDIOCSAUDIO: - { - struct video_audio v; - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - if(v.audio) - return -EINVAL; - current_volume = v/16384; - hardware_set_volume(current_volume); - return 0; - } - - - - In our case there is very little that the user can set. The volume is - basically the limit. Note that we could pretend to have a mute feature - by rewriting this to - - - - case VIDIOCSAUDIO: - { - struct video_audio v; - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - if(v.audio) - return -EINVAL; - current_volume = v/16384; - if(v.flags&VIDEO_AUDIO_MUTE) - hardware_set_volume(0); - else - hardware_set_volume(current_volume); - current_muted = v.flags & - VIDEO_AUDIO_MUTE; - return 0; - } - - - - This with the corresponding changes to the VIDIOCGAUDIO code to report the - state of the mute flag we save and to report the card has a mute function, - will allow applications to use a mute facility with this card. It is - questionable whether this is a good idea however. User applications can already - fake this themselves and kernel space is precious. - - - We now have a working radio ioctl handler. So we just wrap up the function - - - - - } - return -ENOIOCTLCMD; -} - - - - and pass the Video4Linux layer back an error so that it knows we did not - understand the request we got passed. - - - - Module Wrapper - - Finally we add in the usual module wrapping and the driver is done. - - - -#ifndef MODULE - -static int io = 0x300; - -#else - -static int io = -1; - -#endif - -MODULE_AUTHOR("Alan Cox"); -MODULE_DESCRIPTION("A driver for an imaginary radio card."); -module_param(io, int, 0444); -MODULE_PARM_DESC(io, "I/O address of the card."); - -static int __init init(void) -{ - if(io==-1) - { - printk(KERN_ERR - "You must set an I/O address with io=0x???\n"); - return -EINVAL; - } - return myradio_init(NULL); -} - -static void __exit cleanup(void) -{ - video_unregister_device(&my_radio); - release_region(io, MY_IO_SIZE); -} - -module_init(init); -module_exit(cleanup); - - - - In this example we set the IO base by default if the driver is compiled into - the kernel: you can still set it using "my_radio.irq" if this file is called my_radio.c. For the module we require the - user sets the parameter. We set io to a nonsense port (-1) so that we can - tell if the user supplied an io parameter or not. - - - We use MODULE_ defines to give an author for the card driver and a - description. We also use them to declare that io is an integer and it is the - address of the card, and can be read by anyone from sysfs. - - - The clean-up routine unregisters the video_device we registered, and frees - up the I/O space. Note that the unregister takes the actual video_device - structure as its argument. Unlike the file operations structure which can be - shared by all instances of a device a video_device structure as an actual - instance of the device. If you are registering multiple radio devices you - need to fill in one structure per device (most likely by setting up a - template and copying it to each of the actual device structures). - - - - - Video Capture Devices - - Video Capture Device Types - - The video capture devices share the same interfaces as radio devices. In - order to explain the video capture interface I will use the example of a - camera that has no tuners or audio input. This keeps the example relatively - clean. To get both combine the two driver examples. - - - Video capture devices divide into four categories. A little technology - backgrounder. Full motion video even at television resolution (which is - actually fairly low) is pretty resource-intensive. You are continually - passing megabytes of data every second from the capture card to the display. - several alternative approaches have emerged because copying this through the - processor and the user program is a particularly bad idea . - - - The first is to add the television image onto the video output directly. - This is also how some 3D cards work. These basic cards can generally drop the - video into any chosen rectangle of the display. Cards like this, which - include most mpeg1 cards that used the feature connector, aren't very - friendly in a windowing environment. They don't understand windows or - clipping. The video window is always on the top of the display. - - - Chroma keying is a technique used by cards to get around this. It is an old - television mixing trick where you mark all the areas you wish to replace - with a single clear colour that isn't used in the image - TV people use an - incredibly bright blue while computing people often use a particularly - virulent purple. Bright blue occurs on the desktop. Anyone with virulent - purple windows has another problem besides their TV overlay. - - - The third approach is to copy the data from the capture card to the video - card, but to do it directly across the PCI bus. This relieves the processor - from doing the work but does require some smartness on the part of the video - capture chip, as well as a suitable video card. Programming this kind of - card and more so debugging it can be extremely tricky. There are some quite - complicated interactions with the display and you may also have to cope with - various chipset bugs that show up when PCI cards start talking to each - other. - - - To keep our example fairly simple we will assume a card that supports - overlaying a flat rectangular image onto the frame buffer output, and which - can also capture stuff into processor memory. - - - - Registering Video Capture Devices - - This time we need to add more functions for our camera device. - - -static struct video_device my_camera -{ - "My Camera", - VID_TYPE_OVERLAY|VID_TYPE_SCALES|\ - VID_TYPE_CAPTURE|VID_TYPE_CHROMAKEY, - camera_open. - camera_close, - camera_read, /* no read */ - NULL, /* no write */ - camera_poll, /* no poll */ - camera_ioctl, - NULL, /* no special init function */ - NULL /* no private data */ -}; - - - We need a read() function which is used for capturing data from - the card, and we need a poll function so that a driver can wait for the next - frame to be captured. - - - We use the extra video capability flags that did not apply to the - radio interface. The video related flags are - - Capture Capabilities - - - -VID_TYPE_CAPTUREWe support image capture - -VID_TYPE_TELETEXTA teletext capture device (vbi{n]) - -VID_TYPE_OVERLAYThe image can be directly overlaid onto the - frame buffer - -VID_TYPE_CHROMAKEYChromakey can be used to select which parts - of the image to display - -VID_TYPE_CLIPPINGIt is possible to give the board a list of - rectangles to draw around. - -VID_TYPE_FRAMERAMThe video capture goes into the video memory - and actually changes it. Applications need - to know this so they can clean up after the - card - -VID_TYPE_SCALESThe image can be scaled to various sizes, - rather than being a single fixed size. - -VID_TYPE_MONOCHROMEThe capture will be monochrome. This isn't a - complete answer to the question since a mono - camera on a colour capture card will still - produce mono output. - -VID_TYPE_SUBCAPTUREThe card allows only part of its field of - view to be captured. This enables - applications to avoid copying all of a large - image into memory when only some section is - relevant. - - - -
- - We set VID_TYPE_CAPTURE so that we are seen as a capture card, - VID_TYPE_CHROMAKEY so the application knows it is time to draw in virulent - purple, and VID_TYPE_SCALES because we can be resized. - - - Our setup is fairly similar. This time we also want an interrupt line - for the 'frame captured' signal. Not all cards have this so some of them - cannot handle poll(). - - - - -static int io = 0x320; -static int irq = 11; - -int __init mycamera_init(struct video_init *v) -{ - if(!request_region(io, MY_IO_SIZE, "mycamera")) - { - printk(KERN_ERR - "mycamera: port 0x%03X is in use.\n", io); - return -EBUSY; - } - - if(video_device_register(&my_camera, - VFL_TYPE_GRABBER)==-1) { - release_region(io, MY_IO_SIZE); - return -EINVAL; - } - return 0; -} - - - - This is little changed from the needs of the radio card. We specify - VFL_TYPE_GRABBER this time as we want to be allocated a /dev/video name. - - - - Opening And Closing The Capture Device - - - -static int users = 0; - -static int camera_open(struct video_device *dev, int flags) -{ - if(users) - return -EBUSY; - if(request_irq(irq, camera_irq, 0, "camera", dev)<0) - return -EBUSY; - users++; - return 0; -} - - -static int camera_close(struct video_device *dev) -{ - users--; - free_irq(irq, dev); -} - - - The open and close routines are also quite similar. The only real change is - that we now request an interrupt for the camera device interrupt line. If we - cannot get the interrupt we report EBUSY to the application and give up. - - - - Interrupt Handling - - Our example handler is for an ISA bus device. If it was PCI you would be - able to share the interrupt and would have set IRQF_SHARED to indicate a - shared IRQ. We pass the device pointer as the interrupt routine argument. We - don't need to since we only support one card but doing this will make it - easier to upgrade the driver for multiple devices in the future. - - - Our interrupt routine needs to do little if we assume the card can simply - queue one frame to be read after it captures it. - - - - -static struct wait_queue *capture_wait; -static int capture_ready = 0; - -static void camera_irq(int irq, void *dev_id, - struct pt_regs *regs) -{ - capture_ready=1; - wake_up_interruptible(&capture_wait); -} - - - The interrupt handler is nice and simple for this card as we are assuming - the card is buffering the frame for us. This means we have little to do but - wake up anybody interested. We also set a capture_ready flag, as we may - capture a frame before an application needs it. In this case we need to know - that a frame is ready. If we had to collect the frame on the interrupt life - would be more complex. - - - The two new routines we need to supply are camera_read which returns a - frame, and camera_poll which waits for a frame to become ready. - - - - -static int camera_poll(struct video_device *dev, - struct file *file, struct poll_table *wait) -{ - poll_wait(file, &capture_wait, wait); - if(capture_read) - return POLLIN|POLLRDNORM; - return 0; -} - - - - Our wait queue for polling is the capture_wait queue. This will cause the - task to be woken up by our camera_irq routine. We check capture_read to see - if there is an image present and if so report that it is readable. - - - - Reading The Video Image - - - -static long camera_read(struct video_device *dev, char *buf, - unsigned long count) -{ - struct wait_queue wait = { current, NULL }; - u8 *ptr; - int len; - int i; - - add_wait_queue(&capture_wait, &wait); - - while(!capture_ready) - { - if(file->flags&O_NDELAY) - { - remove_wait_queue(&capture_wait, &wait); - current->state = TASK_RUNNING; - return -EWOULDBLOCK; - } - if(signal_pending(current)) - { - remove_wait_queue(&capture_wait, &wait); - current->state = TASK_RUNNING; - return -ERESTARTSYS; - } - schedule(); - current->state = TASK_INTERRUPTIBLE; - } - remove_wait_queue(&capture_wait, &wait); - current->state = TASK_RUNNING; - - - - The first thing we have to do is to ensure that the application waits until - the next frame is ready. The code here is almost identical to the mouse code - we used earlier in this chapter. It is one of the common building blocks of - Linux device driver code and probably one which you will find occurs in any - drivers you write. - - - We wait for a frame to be ready, or for a signal to interrupt our waiting. If a - signal occurs we need to return from the system call so that the signal can - be sent to the application itself. We also check to see if the user actually - wanted to avoid waiting - ie if they are using non-blocking I/O and have other things - to get on with. - - - Next we copy the data from the card to the user application. This is rarely - as easy as our example makes out. We will add capture_w, and capture_h here - to hold the width and height of the captured image. We assume the card only - supports 24bit RGB for now. - - - - - - capture_ready = 0; - - ptr=(u8 *)buf; - len = capture_w * 3 * capture_h; /* 24bit RGB */ - - if(len>count) - len=count; /* Doesn't all fit */ - - for(i=0; i<len; i++) - { - put_user(inb(io+IMAGE_DATA), ptr); - ptr++; - } - - hardware_restart_capture(); - - return i; -} - - - - For a real hardware device you would try to avoid the loop with put_user(). - Each call to put_user() has a time overhead checking whether the accesses to user - space are allowed. It would be better to read a line into a temporary buffer - then copy this to user space in one go. - - - Having captured the image and put it into user space we can kick the card to - get the next frame acquired. - - - - Video Ioctl Handling - - As with the radio driver the major control interface is via the ioctl() - function. Video capture devices support the same tuner calls as a radio - device and also support additional calls to control how the video functions - are handled. In this simple example the card has no tuners to avoid making - the code complex. - - - - - -static int camera_ioctl(struct video_device *dev, unsigned int cmd, void *arg) -{ - switch(cmd) - { - case VIDIOCGCAP: - { - struct video_capability v; - v.type = VID_TYPE_CAPTURE|\ - VID_TYPE_CHROMAKEY|\ - VID_TYPE_SCALES|\ - VID_TYPE_OVERLAY; - v.channels = 1; - v.audios = 0; - v.maxwidth = 640; - v.minwidth = 16; - v.maxheight = 480; - v.minheight = 16; - strcpy(v.name, "My Camera"); - if(copy_to_user(arg, &v, sizeof(v))) - return -EFAULT; - return 0; - } - - - - - The first ioctl we must support and which all video capture and radio - devices are required to support is VIDIOCGCAP. This behaves exactly the same - as with a radio device. This time, however, we report the extra capabilities - we outlined earlier on when defining our video_dev structure. - - - We now set the video flags saying that we support overlay, capture, - scaling and chromakey. We also report size limits - our smallest image is - 16x16 pixels, our largest is 640x480. - - - To keep things simple we report no audio and no tuning capabilities at all. - - - - case VIDIOCGCHAN: - { - struct video_channel v; - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - if(v.channel != 0) - return -EINVAL; - v.flags = 0; - v.tuners = 0; - v.type = VIDEO_TYPE_CAMERA; - v.norm = VIDEO_MODE_AUTO; - strcpy(v.name, "Camera Input");break; - if(copy_to_user(&v, arg, sizeof(v))) - return -EFAULT; - return 0; - } - - - - - This follows what is very much the standard way an ioctl handler looks - in Linux. We copy the data into a kernel space variable and we check that the - request is valid (in this case that the input is 0). Finally we copy the - camera info back to the user. - - - The VIDIOCGCHAN ioctl allows a user to ask about video channels (that is - inputs to the video card). Our example card has a single camera input. The - fields in the structure are - - struct video_channel fields - - - - - channelThe channel number we are selecting - - nameThe name for this channel. This is intended - to describe the port to the user. - Appropriate names are therefore things like - "Camera" "SCART input" - - flagsChannel properties - - typeInput type - - normThe current television encoding being used - if relevant for this channel. - - - - -
- struct video_channel flags - - - - VIDEO_VC_TUNERChannel has a tuner. - - VIDEO_VC_AUDIOChannel has audio. - - - -
- struct video_channel types - - - - VIDEO_TYPE_TVTelevision input. - - VIDEO_TYPE_CAMERAFixed camera input. - - 0Type is unknown. - - - -
- struct video_channel norms - - - - VIDEO_MODE_PALPAL encoded Television - - VIDEO_MODE_NTSCNTSC (US) encoded Television - - VIDEO_MODE_SECAMSECAM (French) Television - - VIDEO_MODE_AUTOAutomatic switching, or format does not - matter - - - -
- - The corresponding VIDIOCSCHAN ioctl allows a user to change channel and to - request the norm is changed - for example to switch between a PAL or an NTSC - format camera. - - - - - case VIDIOCSCHAN: - { - struct video_channel v; - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - if(v.channel != 0) - return -EINVAL; - if(v.norm != VIDEO_MODE_AUTO) - return -EINVAL; - return 0; - } - - - - - The implementation of this call in our driver is remarkably easy. Because we - are assuming fixed format hardware we need only check that the user has not - tried to change anything. - - - The user also needs to be able to configure and adjust the picture they are - seeing. This is much like adjusting a television set. A user application - also needs to know the palette being used so that it knows how to display - the image that has been captured. The VIDIOCGPICT and VIDIOCSPICT ioctl - calls provide this information. - - - - - case VIDIOCGPICT - { - struct video_picture v; - v.brightness = hardware_brightness(); - v.hue = hardware_hue(); - v.colour = hardware_saturation(); - v.contrast = hardware_brightness(); - /* Not settable */ - v.whiteness = 32768; - v.depth = 24; /* 24bit */ - v.palette = VIDEO_PALETTE_RGB24; - if(copy_to_user(&v, arg, - sizeof(v))) - return -EFAULT; - return 0; - } - - - - - The brightness, hue, color, and contrast provide the picture controls that - are akin to a conventional television. Whiteness provides additional - control for greyscale images. All of these values are scaled between 0-65535 - and have 32768 as the mid point setting. The scaling means that applications - do not have to worry about the capability range of the hardware but can let - it make a best effort attempt. - - - Our depth is 24, as this is in bits. We will be returning RGB24 format. This - has one byte of red, then one of green, then one of blue. This then repeats - for every other pixel in the image. The other common formats the interface - defines are - - Framebuffer Encodings - - - - GREYLinear greyscale. This is for simple cameras and the - like - - RGB565The top 5 bits hold 32 red levels, the next six bits - hold green and the low 5 bits hold blue. - - RGB555The top bit is clear. The red green and blue levels - each occupy five bits. - - - -
- - Additional modes are support for YUV capture formats. These are common for - TV and video conferencing applications. - - - The VIDIOCSPICT ioctl allows a user to set some of the picture parameters. - Exactly which ones are supported depends heavily on the card itself. It is - possible to support many modes and effects in software. In general doing - this in the kernel is a bad idea. Video capture is a performance-sensitive - application and the programs can often do better if they aren't being - 'helped' by an overkeen driver writer. Thus for our device we will report - RGB24 only and refuse to allow a change. - - - - - case VIDIOCSPICT: - { - struct video_picture v; - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - if(v.depth!=24 || - v.palette != VIDEO_PALETTE_RGB24) - return -EINVAL; - set_hardware_brightness(v.brightness); - set_hardware_hue(v.hue); - set_hardware_saturation(v.colour); - set_hardware_brightness(v.contrast); - return 0; - } - - - - - We check the user has not tried to change the palette or the depth. We do - not want to carry out some of the changes and then return an error. This may - confuse the application which will be assuming no change occurred. - - - In much the same way as you need to be able to set the picture controls to - get the right capture images, many cards need to know what they are - displaying onto when generating overlay output. In some cases getting this - wrong even makes a nasty mess or may crash the computer. For that reason - the VIDIOCSBUF ioctl used to set up the frame buffer information may well - only be usable by root. - - - We will assume our card is one of the old ISA devices with feature connector - and only supports a couple of standard video modes. Very common for older - cards although the PCI devices are way smarter than this. - - - - -static struct video_buffer capture_fb; - - case VIDIOCGFBUF: - { - if(copy_to_user(arg, &capture_fb, - sizeof(capture_fb))) - return -EFAULT; - return 0; - - } - - - - - We keep the frame buffer information in the format the ioctl uses. This - makes it nice and easy to work with in the ioctl calls. - - - - case VIDIOCSFBUF: - { - struct video_buffer v; - - if(!capable(CAP_SYS_ADMIN)) - return -EPERM; - - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - if(v.width!=320 && v.width!=640) - return -EINVAL; - if(v.height!=200 && v.height!=240 - && v.height!=400 - && v.height !=480) - return -EINVAL; - memcpy(&capture_fb, &v, sizeof(v)); - hardware_set_fb(&v); - return 0; - } - - - - - - The capable() function checks a user has the required capability. The Linux - operating system has a set of about 30 capabilities indicating privileged - access to services. The default set up gives the superuser (uid 0) all of - them and nobody else has any. - - - We check that the user has the SYS_ADMIN capability, that is they are - allowed to operate as the machine administrator. We don't want anyone but - the administrator making a mess of the display. - - - Next we check for standard PC video modes (320 or 640 wide with either - EGA or VGA depths). If the mode is not a standard video mode we reject it as - not supported by our card. If the mode is acceptable we save it so that - VIDIOCFBUF will give the right answer next time it is called. The - hardware_set_fb() function is some undescribed card specific function to - program the card for the desired mode. - - - Before the driver can display an overlay window it needs to know where the - window should be placed, and also how large it should be. If the card - supports clipping it needs to know which rectangles to omit from the - display. The video_window structure is used to describe the way the image - should be displayed. - - struct video_window fields - - - - widthThe width in pixels of the desired image. The card - may use a smaller size if this size is not available - - heightThe height of the image. The card may use a smaller - size if this size is not available. - - x The X position of the top left of the window. This - is in pixels relative to the left hand edge of the - picture. Not all cards can display images aligned on - any pixel boundary. If the position is unsuitable - the card adjusts the image right and reduces the - width. - - y The Y position of the top left of the window. This - is counted in pixels relative to the top edge of the - picture. As with the width if the card cannot - display starting on this line it will adjust the - values. - - chromakeyThe colour (expressed in RGB32 format) for the - chromakey colour if chroma keying is being used. - - clipsAn array of rectangles that must not be drawn - over. - - clipcountThe number of clips in this array. - - - -
- - Each clip is a struct video_clip which has the following fields - - video_clip fields - - - - x, yCo-ordinates relative to the display - - width, heightWidth and height in pixels - - nextA spare field for the application to use - - - -
- - The driver is required to ensure it always draws in the area requested or a smaller area, and that it never draws in any of the areas that are clipped. - This may well mean it has to leave alone. small areas the application wished to be - drawn. - - - Our example card uses chromakey so does not have to address most of the - clipping. We will add a video_window structure to our global variables to - remember our parameters, as we did with the frame buffer. - - - - - case VIDIOCGWIN: - { - if(copy_to_user(arg, &capture_win, - sizeof(capture_win))) - return -EFAULT; - return 0; - } - - - case VIDIOCSWIN: - { - struct video_window v; - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - if(v.width > 640 || v.height > 480) - return -EINVAL; - if(v.width < 16 || v.height < 16) - return -EINVAL; - hardware_set_key(v.chromakey); - hardware_set_window(v); - memcpy(&capture_win, &v, sizeof(v)); - capture_w = v.width; - capture_h = v.height; - return 0; - } - - - - - Because we are using Chromakey our setup is fairly simple. Mostly we have to - check the values are sane and load them into the capture card. - - - With all the setup done we can now turn on the actual capture/overlay. This - is done with the VIDIOCCAPTURE ioctl. This takes a single integer argument - where 0 is on and 1 is off. - - - - - case VIDIOCCAPTURE: - { - int v; - if(get_user(v, (int *)arg)) - return -EFAULT; - if(v==0) - hardware_capture_off(); - else - { - if(capture_fb.width == 0 - || capture_w == 0) - return -EINVAL; - hardware_capture_on(); - } - return 0; - } - - - - - We grab the flag from user space and either enable or disable according to - its value. There is one small corner case we have to consider here. Suppose - that the capture was requested before the video window or the frame buffer - had been set up. In those cases there will be unconfigured fields in our - card data, as well as unconfigured hardware settings. We check for this case and - return an error if the frame buffer or the capture window width is zero. - - - - - default: - return -ENOIOCTLCMD; - } -} - - - - We don't need to support any other ioctls, so if we get this far, it is time - to tell the video layer that we don't now what the user is talking about. - - - - Other Functionality - - The Video4Linux layer supports additional features, including a high - performance mmap() based capture mode and capturing part of the image. - These features are out of the scope of the book. You should however have enough - example code to implement most simple video4linux devices for radio and TV - cards. - - - - - Known Bugs And Assumptions - - - Multiple Opens - - - The driver assumes multiple opens should not be allowed. A driver - can work around this but not cleanly. - - - - API Deficiencies - - - The existing API poorly reflects compression capable devices. There - are plans afoot to merge V4L, V4L2 and some other ideas into a - better interface. - - - - - - - - - Public Functions Provided -!Edrivers/media/video/v4l2-dev.c - - - -- cgit v1.2.3-70-g09d2 From 12caa1b6fc3a9772535227c723c11878b5ca618e Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 7 Oct 2008 12:17:28 +0200 Subject: Add a reference to paper to SubmittingPatches Add a reference to paper to SubmittingPatches For this year's OLS I wrote a paper on successfull strategies to submit difficult kernel patches. Add a reference to it to SubmittingPatches. Signed-off-by: Andi Kleen Signed-off-by: Jonathan Corbet --- Documentation/SubmittingPatches | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 0d601cba969..98aa8b18739 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -672,4 +672,9 @@ Kernel Documentation/CodingStyle: Linus Torvalds's mail on the canonical patch format: + +Andi Kleen, "On submitting kernel patches" + Some strategies to get difficult or controversal changes in. + http://halobates.de/on-submitting-patches.pdf + -- -- cgit v1.2.3-70-g09d2 From b25f29b0da23f4f784f9bcae954b157e1f45cc69 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Wed, 15 Oct 2008 22:01:21 -0700 Subject: pm: document use of RTC in pm_trace As pm_trace uses the system's hardware clock to save its magic value, users of that option should be warned that using this debug option will result in an incorrect system time after resume. Signed-off-by: Frans Pop Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/power/s2ram.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'Documentation') diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt index b05f512130e..2ebdc6091ce 100644 --- a/Documentation/power/s2ram.txt +++ b/Documentation/power/s2ram.txt @@ -54,3 +54,21 @@ used to run with "radeonfb" (it's an ATI Radeon mobility). It turns out that "radeonfb" simply cannot resume that device - it tries to set the PLL's, and it just _hangs_. Using the regular VGA console and letting X resume it instead works fine. + +NOTE +==== +pm_trace uses the system's Real Time Clock (RTC) to save the magic number. +Reason for this is that the RTC is the only reliably available piece of +hardware during resume operations where a value can be set that will +survive a reboot. + +Consequence is that after a resume (even if it is successful) your system +clock will have a value corresponding to the magic mumber instead of the +correct date/time! It is therefore advisable to use a program like ntp-date +or rdate to reset the correct date/time from an external time source when +using this trace option. + +As the clock keeps ticking it is also essential that the reboot is done +quickly after the resume failure. The trace option does not use the seconds +or the low order bits of the minutes of the RTC, but a too long delay will +corrupt the magic value. -- cgit v1.2.3-70-g09d2 From dd1c53a64a48b6c16f349e46b71f0938d9a4fa1f Mon Sep 17 00:00:00 2001 From: frans Date: Wed, 15 Oct 2008 22:01:30 -0700 Subject: Fix Documentation/filesystems/ramfs-rootfs-initramfs.txt First a file hello.c is created, then the file hello2.c is compiled. Change this to hello.c Signed-off-by: Frans Meulenbroeks Signed-off-by: Rob Landley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/ramfs-rootfs-initramfs.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt index 7be232b44ee..62fe9b1e089 100644 --- a/Documentation/filesystems/ramfs-rootfs-initramfs.txt +++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt @@ -263,7 +263,7 @@ User Mode Linux, like so: sleep(999999999); } EOF - gcc -static hello2.c -o init + gcc -static hello.c -o init echo init | cpio -o -H newc | gzip > test.cpio.gz # Testing external initramfs using the initrd loading mechanism. qemu -kernel /boot/vmlinuz -initrd test.cpio.gz /dev/zero -- cgit v1.2.3-70-g09d2 From 404d0ae289f7a76ff233e8fbfde8b1e7b6e62ae3 Mon Sep 17 00:00:00 2001 From: Danny ter Haar Date: Wed, 15 Oct 2008 22:01:34 -0700 Subject: fix random typos Signed-off-by: Danny ter Haar Cc: Patrick McHardy Cc: Mikael Starvik Cc: Avi Kivity Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cris/README | 2 +- Documentation/ia64/kvm.txt | 9 +++++---- net/netfilter/nf_conntrack_acct.c | 2 +- 3 files changed, 7 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cris/README b/Documentation/cris/README index 795a1dabe6c..d9b086869a6 100644 --- a/Documentation/cris/README +++ b/Documentation/cris/README @@ -27,7 +27,7 @@ operating system. The ETRAX 100LX chip -------------------- -For reference, plase see the press-release: +For reference, please see the press-release: http://www.axis.com/news/us/001101_etrax.htm diff --git a/Documentation/ia64/kvm.txt b/Documentation/ia64/kvm.txt index 914d07f4926..84f7cb3d5be 100644 --- a/Documentation/ia64/kvm.txt +++ b/Documentation/ia64/kvm.txt @@ -1,7 +1,8 @@ -Currently, kvm module in EXPERIMENTAL stage on IA64. This means that -interfaces are not stable enough to use. So, plase had better don't run -critical applications in virtual machine. We will try our best to make it -strong in future versions! +Currently, kvm module is in EXPERIMENTAL stage on IA64. This means that +interfaces are not stable enough to use. So, please don't run critical +applications in virtual machine. +We will try our best to improve it in future versions! + Guide: How to boot up guests on kvm/ia64 This guide is to describe how to enable kvm support for IA-64 systems. diff --git a/net/netfilter/nf_conntrack_acct.c b/net/netfilter/nf_conntrack_acct.c index 03591d37b9c..b92df5c1dfc 100644 --- a/net/netfilter/nf_conntrack_acct.c +++ b/net/netfilter/nf_conntrack_acct.c @@ -115,7 +115,7 @@ int nf_conntrack_acct_init(struct net *net) if (net_eq(net, &init_net)) { #ifdef CONFIG_NF_CT_ACCT - printk(KERN_WARNING "CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use\n"); + printk(KERN_WARNING "CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use\n"); printk(KERN_WARNING "nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or\n"); printk(KERN_WARNING "sysctl net.netfilter.nf_conntrack_acct=1 to enable it.\n"); #endif -- cgit v1.2.3-70-g09d2 From c80cfb0406c01bb5da91bfe30f5cb1fd96831138 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 15 Oct 2008 22:01:35 -0700 Subject: vsprintf: use new vsprintf symbolic function pointer format Use the '%pF' format to get rid of an "#ifdef DEBUG" and make some printks atomic. This removes the last in-tree uses of print_fn_descriptor_symbol(). I marked print_fn_descriptor_symbol() deprecated and scheduled it for removal next year to give time for out-of-tree modules to be updated. parisc's print_fn_descriptor_symbol() is currently broken there (it needs to dereference the function pointer similar to ia64 and power). This patch shouldn't make anything worse, but it means we need to fix dereference_function_descriptor() instead of print_fn_descriptor_symbol() to get meaningful initcall_debug output. Signed-off-by: Bjorn Helgaas Cc: Jesse Barnes Cc: Kyle McMartin Cc: "Rafael J. Wysocki" Cc: Kay Sievers Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/feature-removal-schedule.txt | 9 +++++++++ drivers/base/power/main.c | 7 ++----- include/linux/kallsyms.h | 8 +++----- 3 files changed, 14 insertions(+), 10 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 4d2566a7d16..f5f812daf9f 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -294,6 +294,15 @@ Who: Jiri Slaby --------------------------- +What: print_fn_descriptor_symbol() +When: October 2009 +Why: The %pF vsprintf format provides the same functionality in a + simpler way. print_fn_descriptor_symbol() is deprecated but + still present to give out-of-tree modules time to change. +Who: Bjorn Helgaas + +--------------------------- + What: /sys/o2cb symlink When: January 2010 Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 273a944d404..03bde7524bc 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -778,10 +778,7 @@ EXPORT_SYMBOL_GPL(device_suspend); void __suspend_report_result(const char *function, void *fn, int ret) { - if (ret) { - printk(KERN_ERR "%s(): ", function); - print_fn_descriptor_symbol("%s returns ", fn); - printk("%d\n", ret); - } + if (ret) + printk(KERN_ERR "%s(): %pF returns %d\n", function, fn, ret); } EXPORT_SYMBOL_GPL(__suspend_report_result); diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h index b9614488744..f3fe34391d8 100644 --- a/include/linux/kallsyms.h +++ b/include/linux/kallsyms.h @@ -93,12 +93,10 @@ static inline void print_symbol(const char *fmt, unsigned long addr) } /* - * Pretty-print a function pointer. - * - * ia64 and ppc64 function pointers are really function descriptors, - * which contain a pointer the real address. + * Pretty-print a function pointer. This function is deprecated. + * Please use the "%pF" vsprintf format instead. */ -static inline void print_fn_descriptor_symbol(const char *fmt, void *addr) +static inline void __deprecated print_fn_descriptor_symbol(const char *fmt, void *addr) { #if defined(CONFIG_IA64) || defined(CONFIG_PPC64) addr = *(void **)addr; -- cgit v1.2.3-70-g09d2 From 22b8ce94708f7cdf0b04965c6f7443dfd374c35c Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Wed, 15 Oct 2008 22:01:46 -0700 Subject: profiling: dynamically enable readprofile at runtime Way too often, I have a machine that exhibits some kind of crappy behavior. The CPU looks wedged in the kernel or it is spending way too much system time and I wonder what is responsible. I try to run readprofile. But, of course, Ubuntu doesn't enable it by default. Dang! The reason we boot-time enable it is that it takes a big bufffer that we generally can only bootmem alloc. But, does it hurt to at least try and runtime-alloc it? To use: echo 2 > /sys/kernel/profile Then run readprofile like normal. This should fix the compile issue with allmodconfig. I've compile-tested on a bunch more configs now including a few more architectures. Signed-off-by: Dave Hansen Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-profiling | 13 ++++++++++ include/linux/profile.h | 8 +++--- kernel/ksysfs.c | 35 ++++++++++++++++++++++++++ kernel/profile.c | 41 +++++++++++++++++++++++-------- 4 files changed, 84 insertions(+), 13 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-profiling (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-profiling b/Documentation/ABI/testing/sysfs-profiling new file mode 100644 index 00000000000..b02d8b8c173 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-profiling @@ -0,0 +1,13 @@ +What: /sys/kernel/profile +Date: September 2008 +Contact: Dave Hansen +Description: + /sys/kernel/profile is the runtime equivalent + of the boot-time profile= option. + + You can get the same effect running: + + echo 2 > /sys/kernel/profile + + as you would by issuing profile=2 on the boot + command line. diff --git a/include/linux/profile.h b/include/linux/profile.h index 7e7087239af..570045053ce 100644 --- a/include/linux/profile.h +++ b/include/linux/profile.h @@ -35,7 +35,9 @@ enum profile_type { extern int prof_on __read_mostly; /* init basic kernel profiler */ -void __init profile_init(void); +int profile_init(void); +int profile_setup(char *str); +int create_proc_profile(void); void profile_tick(int type); /* @@ -84,9 +86,9 @@ struct pt_regs; #define prof_on 0 -static inline void profile_init(void) +static inline int profile_init(void) { - return; + return 0; } static inline void profile_tick(int type) diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c index e53bc30e9ba..08dd8ed86c7 100644 --- a/kernel/ksysfs.c +++ b/kernel/ksysfs.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #define KERNEL_ATTR_RO(_name) \ @@ -53,6 +54,37 @@ static ssize_t uevent_helper_store(struct kobject *kobj, KERNEL_ATTR_RW(uevent_helper); #endif +#ifdef CONFIG_PROFILING +static ssize_t profiling_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", prof_on); +} +static ssize_t profiling_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t count) +{ + int ret; + + if (prof_on) + return -EEXIST; + /* + * This eventually calls into get_option() which + * has a ton of callers and is not const. It is + * easiest to cast it away here. + */ + profile_setup((char *)buf); + ret = profile_init(); + if (ret) + return ret; + ret = create_proc_profile(); + if (ret) + return ret; + return count; +} +KERNEL_ATTR_RW(profiling); +#endif + #ifdef CONFIG_KEXEC static ssize_t kexec_loaded_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) @@ -109,6 +141,9 @@ static struct attribute * kernel_attrs[] = { &uevent_seqnum_attr.attr, &uevent_helper_attr.attr, #endif +#ifdef CONFIG_PROFILING + &profiling_attr.attr, +#endif #ifdef CONFIG_KEXEC &kexec_loaded_attr.attr, &kexec_crash_loaded_attr.attr, diff --git a/kernel/profile.c b/kernel/profile.c index cd26bed4cc2..a9e422df6bf 100644 --- a/kernel/profile.c +++ b/kernel/profile.c @@ -22,6 +22,8 @@ #include #include #include +#include +#include #include #include #include @@ -50,11 +52,11 @@ static DEFINE_PER_CPU(int, cpu_profile_flip); static DEFINE_MUTEX(profile_flip_mutex); #endif /* CONFIG_SMP */ -static int __init profile_setup(char *str) +int profile_setup(char *str) { - static char __initdata schedstr[] = "schedule"; - static char __initdata sleepstr[] = "sleep"; - static char __initdata kvmstr[] = "kvm"; + static char schedstr[] = "schedule"; + static char sleepstr[] = "sleep"; + static char kvmstr[] = "kvm"; int par; if (!strncmp(str, sleepstr, strlen(sleepstr))) { @@ -100,14 +102,33 @@ static int __init profile_setup(char *str) __setup("profile=", profile_setup); -void __init profile_init(void) +int profile_init(void) { + int buffer_bytes; if (!prof_on) - return; + return 0; /* only text is profiled */ prof_len = (_etext - _stext) >> prof_shift; - prof_buffer = alloc_bootmem(prof_len*sizeof(atomic_t)); + buffer_bytes = prof_len*sizeof(atomic_t); + if (!slab_is_available()) { + prof_buffer = alloc_bootmem(buffer_bytes); + return 0; + } + + prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL); + if (prof_buffer) + return 0; + + prof_buffer = alloc_pages_exact(buffer_bytes, GFP_KERNEL|__GFP_ZERO); + if (prof_buffer) + return 0; + + prof_buffer = vmalloc(buffer_bytes); + if (prof_buffer) + return 0; + + return -ENOMEM; } /* Profile event notifications */ @@ -527,7 +548,7 @@ static void __init profile_nop(void *unused) { } -static int __init create_hash_tables(void) +static int create_hash_tables(void) { int cpu; @@ -575,14 +596,14 @@ out_cleanup: #define create_hash_tables() ({ 0; }) #endif -static int __init create_proc_profile(void) +int create_proc_profile(void) { struct proc_dir_entry *entry; if (!prof_on) return 0; if (create_hash_tables()) - return -1; + return -ENOMEM; entry = proc_create("profile", S_IWUSR | S_IRUGO, NULL, &proc_profile_operations); if (!entry) -- cgit v1.2.3-70-g09d2 From 1c828320d2e063dd1ec84e873e6399bfc3d85d6f Mon Sep 17 00:00:00 2001 From: Shane McDonald Date: Wed, 15 Oct 2008 22:01:46 -0700 Subject: doc: typo in Documentation/filesystems/nfsroot.txt Add a missing word to the explanation of the purpose of the zdisk and bzdisk make targets. Signed-off-by: Shane McDonald Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/nfsroot.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/nfsroot.txt b/Documentation/filesystems/nfsroot.txt index 31b32917234..68baddf3c3e 100644 --- a/Documentation/filesystems/nfsroot.txt +++ b/Documentation/filesystems/nfsroot.txt @@ -169,7 +169,7 @@ They depend on various facilities being available: 3.1) Booting from a floppy using syslinux When building kernels, an easy way to create a boot floppy that uses - syslinux is to use the zdisk or bzdisk make targets which use + syslinux is to use the zdisk or bzdisk make targets which use zimage and bzimage images respectively. Both targets accept the FDARGS parameter which can be used to set the kernel command line. -- cgit v1.2.3-70-g09d2 From 929f37cb3c3e0f4d23d7106693b7067cf72f4dbc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 15 Oct 2008 22:01:48 -0700 Subject: dontdiff: more updates to be closer to gitignore defkeymap.c_shipped should be diffed if it is changed. Reported-by: Mike Galbraith COPYING, CREDITS, .mailmap should be diffed if they are changed. keywords.c_shipped & lex.c_shipped should be diffed when changed. parse.[ch]_shipped should be diffed when changed. Reported-by: Sam Ravnborg vsyscall* updates from a .gitignore patch by "Denis V. Lunev" . *.so.dbg from a .gitignore patch by Thomas Gleixner . binoffset from a .gitignore patch by Uwe Kleine-Koenig . Module.markers from a .gitignore patch by Matthew Wilcox . vmlinux*.lds* should be diffed if changed. Reported-by: Etienne Lorrain vmlinux.lds from a .gitignore patch by Daniel Guilak . *.scr should be diffed if changed. Lots of updates from http://lkml.org/lkml/2008/5/20/32 Reported-by: Bart Van Assche Use ncscope.* instead of *cscope* since the latter may catch too many files. Add *.elf, from a .gitignore patch by Eduard - Gabriel Munteanu . Make firmware entries match .gitignore entries. Make some entries less greedy by removing trailing '*'. Remove "make_times_h" (no such file). Remove "filelist" (no such file). Remove "dummy_sym.c" (no such file). Remove "gen-kdb_cmds.c" (no such file). Remove "gentbl" (no such file). Remove "kconfig.tk" (no such file). Remove "tkparse" (no such file). Remove "sim710_d.h" (no such file). Remove "53c8xx_d.h" (no such file). Add "syscalltab.h" (generated file). Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/dontdiff | 59 ++++++++++++++++++++++++++++---------------------- 1 file changed, 33 insertions(+), 26 deletions(-) (limited to 'Documentation') diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 27809357da5..1e89a51ea49 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -2,11 +2,13 @@ *.aux *.bin *.cpio -*.css +*.csp +*.dsp *.dvi +*.elf *.eps -*.fw.gen.S *.fw +*.gen.S *.gif *.grep *.grp @@ -30,6 +32,7 @@ *.s *.sgml *.so +*.so.dbg *.symtypes *.tab.c *.tab.h @@ -38,24 +41,17 @@ *.xml *_MODULES *_vga16.c -*cscope* *~ *.9 *.9.gz .* -.cscope -.gitignore -.mailmap .mm 53c700_d.h -53c8xx_d.h* -COPYING -CREDITS CVS ChangeSet Image Kerntypes -MODS.txt +Module.markers Module.symvers PENDING SCCS @@ -73,7 +69,9 @@ autoconf.h* bbootsect bin2c binkernel.spec +binoffset bootsect +bounds.h bsetup btfixupprep build @@ -89,39 +87,36 @@ config_data.h* config_data.gz* conmakehash consolemap_deftbl.c* +cpustr.h crc32table.h* cscope.* -defkeymap.c* +defkeymap.c devlist.h* docproc -dummy_sym.c* elf2ecoff elfconfig.h* -filelist fixdep fore200e_mkfirm fore200e_pca_fw.c* gconf gen-devlist -gen-kdb_cmds.c* gen_crc32table gen_init_cpio genksyms -gentbl *_gray256.c +ihex2fw ikconfig.h* initramfs_data.cpio initramfs_data.cpio.gz initramfs_list kallsyms kconfig -kconfig.tk -keywords.c* +keywords.c ksym.c* ksym.h* kxgettext lkc_defs.h -lex.c* +lex.c lex.*.c logo_*.c logo_*_clut224.c @@ -130,7 +125,6 @@ lxdialog mach-types mach-types.h machtypes.h -make_times_h map maui_boot.h mconf @@ -138,6 +132,7 @@ miboot* mk_elfconfig mkboot mkbugboot +mkcpustr mkdep mkprep mktables @@ -145,11 +140,12 @@ mktree modpost modules.order modversions.h* +ncscope.* offset.h offsets.h oui.c* -parse.c* -parse.h* +parse.c +parse.h patches* pca200e.bin pca200e_ecd.bin2 @@ -157,7 +153,7 @@ piggy.gz piggyback pnmtologo ppc_defs.h* -promcon_tbl.c* +promcon_tbl.c pss_boot.h qconf raid6altivec*.c @@ -168,27 +164,38 @@ series setup setup.bin setup.elf -sim710_d.h* sImage sm_tbl* split-include +syscalltab.h tags tftpboot.img timeconst.h times.h* -tkparse trix_boot.h utsrelease.h* +vdso-syms.lds vdso.lds +vdso32-int80-syms.lds +vdso32-syms.lds +vdso32-syscall-syms.lds +vdso32-sysenter-syms.lds +vdso32.lds +vdso32.so.dbg +vdso64.lds +vdso64.so.dbg version.h* vmlinux vmlinux-* vmlinux.aout -vmlinux*.lds* -vmlinux*.scr +vmlinux.lds vsyscall.lds +vsyscall_32.lds wanxlfw.inc uImage unifdef +wakeup.bin +wakeup.elf +wakeup.lds zImage* zconf.hash.c -- cgit v1.2.3-70-g09d2 From 8033fe65a6d6c0e47ba9e3cb2e4e6902f9dfb8dd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 15 Oct 2008 22:01:59 -0700 Subject: documentation: explain memory barriers We want all uses of memory barriers to be explained in the source code. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/SubmitChecklist | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist index 21f0795af20..ac5e0b2f109 100644 --- a/Documentation/SubmitChecklist +++ b/Documentation/SubmitChecklist @@ -85,3 +85,6 @@ kernel patches. 23: Tested after it has been merged into the -mm patchset to make sure that it still works with all of the other queued patches and various changes in the VM, VFS, and other subsystems. + +24: All memory barriers {e.g., barrier(), rmb(), wmb()} need a comment in the + source code that explains the logic of what they are doing and why. -- cgit v1.2.3-70-g09d2 From e1f8e87449147ffe5ea3de64a46af7de450ce279 Mon Sep 17 00:00:00 2001 From: Francois Cami Date: Wed, 15 Oct 2008 22:01:59 -0700 Subject: Remove Andrew Morton's old email accounts People can use the real name an an index into MAINTAINERS to find the current email address. Signed-off-by: Francois Cami Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/SAK.txt | 2 +- Documentation/SubmittingDrivers | 2 +- Documentation/networking/cs89x0.txt | 4 ++-- Documentation/networking/vortex.txt | 4 ++-- Documentation/scsi/ChangeLog.megaraid | 6 +++--- drivers/char/vt.c | 2 +- drivers/net/3c509.c | 2 +- drivers/net/cs89x0.c | 13 ++++++------- drivers/parport/ChangeLog | 2 +- fs/direct-io.c | 4 ++-- fs/fs-writeback.c | 2 +- fs/mpage.c | 2 +- include/linux/journal-head.h | 2 +- include/linux/task_io_accounting.h | 2 +- kernel/printk.c | 2 +- kernel/workqueue.c | 2 +- mm/fadvise.c | 2 +- mm/page-writeback.c | 2 +- mm/pdflush.c | 2 +- mm/readahead.c | 2 +- mm/truncate.c | 2 +- 21 files changed, 31 insertions(+), 32 deletions(-) (limited to 'Documentation') diff --git a/Documentation/SAK.txt b/Documentation/SAK.txt index b9019ca872e..74be14679ed 100644 --- a/Documentation/SAK.txt +++ b/Documentation/SAK.txt @@ -1,5 +1,5 @@ Linux 2.4.2 Secure Attention Key (SAK) handling -18 March 2001, Andrew Morton +18 March 2001, Andrew Morton An operating system's Secure Attention Key is a security tool which is provided as protection against trojan password capturing programs. It diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers index 24f2eb40cae..99e72a81fa2 100644 --- a/Documentation/SubmittingDrivers +++ b/Documentation/SubmittingDrivers @@ -41,7 +41,7 @@ Linux 2.4: Linux 2.6: The same rules apply as 2.4 except that you should follow linux-kernel to track changes in API's. The final contact point for Linux 2.6 - submissions is Andrew Morton . + submissions is Andrew Morton. What Criteria Determine Acceptance ---------------------------------- diff --git a/Documentation/networking/cs89x0.txt b/Documentation/networking/cs89x0.txt index 6387d3decf8..c725d33b316 100644 --- a/Documentation/networking/cs89x0.txt +++ b/Documentation/networking/cs89x0.txt @@ -3,7 +3,7 @@ NOTE ---- This document was contributed by Cirrus Logic for kernel 2.2.5. This version -has been updated for 2.3.48 by Andrew Morton +has been updated for 2.3.48 by Andrew Morton. Cirrus make a copy of this driver available at their website, as described below. In general, you should use the driver version which @@ -690,7 +690,7 @@ latest drivers and technical publications. 6.4 Current maintainer In February 2000 the maintenance of this driver was assumed by Andrew -Morton +Morton. 6.5 Kernel module parameters diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt index 6356d3faed3..bd874daabde 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/vortex.txt @@ -1,5 +1,5 @@ Documentation/networking/vortex.txt -Andrew Morton +Andrew Morton 30 April 2000 @@ -11,7 +11,7 @@ The driver was written by Donald Becker Don is no longer the prime maintainer of this version of the driver. Please report problems to one or more of: - Andrew Morton + Andrew Morton Netdev mailing list Linux kernel mailing list diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index 37796fe45bd..eaa4801f2ce 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -409,7 +409,7 @@ i. Function reordering so that inline functions are defined before they megaraid_mbox_prepare_pthru, megaraid_mbox_prepare_epthru, megaraid_busywait_mbox - - Andrew Morton , 08.19.2004 + - Andrew Morton, 08.19.2004 linux-scsi mailing list "Something else to clean up after inclusion: every instance of an @@ -471,13 +471,13 @@ vi. Add support for 64-bit applications. Current drivers assume only vii. Move the function declarations for the management module from megaraid_mm.h to megaraid_mm.c - - Andrew Morton , 08.19.2004 + - Andrew Morton, 08.19.2004 linux-scsi mailing list viii. Change default values for MEGARAID_NEWGEN, MEGARAID_MM, and MEGARAID_MAILBOX to 'n' in Kconfig.megaraid - - Andrew Morton , 08.19.2004 + - Andrew Morton, 08.19.2004 linux-scsi mailing list ix. replace udelay with msleep diff --git a/drivers/char/vt.c b/drivers/char/vt.c index a0f7ffb6808..d8f83e26e4a 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -59,7 +59,7 @@ * by Martin Mares , July 1998 * * Removed old-style timers, introduced console_timer, made timer - * deletion SMP-safe. 17Jun00, Andrew Morton + * deletion SMP-safe. 17Jun00, Andrew Morton * * Removed console_lock, enabled interrupts across all console operations * 13 March 2001, Andrew Morton diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index b9d097c9f6b..3a7bc524af3 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -40,7 +40,7 @@ v1.14 10/15/97 Avoided waiting..discard message for fast machines -djb v1.15 1/31/98 Faster recovery for Tx errors. -djb v1.16 2/3/98 Different ID port handling to avoid sound cards. -djb - v1.18 12Mar2001 Andrew Morton + v1.18 12Mar2001 Andrew Morton - Avoid bogus detect of 3c590's (Andrzej Krzysztofowicz) - Reviewed against 1.18 from scyld.com v1.18a 17Nov2001 Jeff Garzik diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index a28de818280..7107620f615 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -36,8 +36,7 @@ Alan Cox : Removed 1.2 support, added 2.1 extra counters. - Andrew Morton : andrewm@uow.edu.au - : Kernel 2.3.48 + Andrew Morton : Kernel 2.3.48 : Handle kmalloc() failures : Other resource allocation fixes : Add SMP locks @@ -49,7 +48,7 @@ : Fixed an out-of-mem bug in dma_rx() : Updated Documentation/networking/cs89x0.txt - Andrew Morton : andrewm@uow.edu.au / Kernel 2.3.99-pre1 + Andrew Morton : Kernel 2.3.99-pre1 : Use skb_reserve to longword align IP header (two places) : Remove a delay loop from dma_rx() : Replace '100' with HZ @@ -57,11 +56,11 @@ : Added 'cs89x0_dma=N' kernel boot option : Correctly initialise lp->lock in non-module compile - Andrew Morton : andrewm@uow.edu.au / Kernel 2.3.99-pre4-1 + Andrew Morton : Kernel 2.3.99-pre4-1 : MOD_INC/DEC race fix (see : http://www.uwsg.indiana.edu/hypermail/linux/kernel/0003.3/1532.html) - Andrew Morton : andrewm@uow.edu.au / Kernel 2.4.0-test7-pre2 + Andrew Morton : Kernel 2.4.0-test7-pre2 : Enhanced EEPROM support to cover more devices, : abstracted IRQ mapping to support CONFIG_ARCH_CLPS7500 arch : (Jason Gunthorpe ) @@ -156,7 +155,7 @@ #include "cs89x0.h" static char version[] __initdata = -"cs89x0.c: v2.4.3-pre1 Russell Nelson , Andrew Morton \n"; +"cs89x0.c: v2.4.3-pre1 Russell Nelson , Andrew Morton\n"; #define DRV_NAME "cs89x0" @@ -1877,7 +1876,7 @@ MODULE_PARM_DESC(dmasize , "(ignored)"); MODULE_PARM_DESC(use_dma , "(ignored)"); #endif -MODULE_AUTHOR("Mike Cruse, Russwll Nelson , Andrew Morton "); +MODULE_AUTHOR("Mike Cruse, Russwll Nelson , Andrew Morton"); MODULE_LICENSE("GPL"); diff --git a/drivers/parport/ChangeLog b/drivers/parport/ChangeLog index db717c1d62a..8565bbbeb6e 100644 --- a/drivers/parport/ChangeLog +++ b/drivers/parport/ChangeLog @@ -311,7 +311,7 @@ * ieee1284_ops.c (parport_ieee1284_read_nibble): Reset nAutoFd on timeout. Matches 2.2.x behaviour. -2001-03-02 Andrew Morton +2001-03-02 Andrew Morton * parport_pc.c (registered_parport): New static variable. (parport_pc_find_ports): Set it when we register PCI driver. diff --git a/fs/direct-io.c b/fs/direct-io.c index 9606ee848fd..af0558dbe8b 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -5,11 +5,11 @@ * * O_DIRECT * - * 04Jul2002 akpm@zip.com.au + * 04Jul2002 Andrew Morton * Initial version * 11Sep2002 janetinc@us.ibm.com * added readv/writev support. - * 29Oct2002 akpm@zip.com.au + * 29Oct2002 Andrew Morton * rewrote bio_add_page() support. * 30Oct2002 pbadari@us.ibm.com * added support for non-aligned IO. diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 25adfc3c693..d0ff0b8cf30 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -8,7 +8,7 @@ * pages against inodes. ie: data writeback. Writeout of the * inode itself is not handled here. * - * 10Apr2002 akpm@zip.com.au + * 10Apr2002 Andrew Morton * Split out of fs/inode.c * Additions for address_space-based writeback */ diff --git a/fs/mpage.c b/fs/mpage.c index dbcc7af76a1..552b80b3fac 100644 --- a/fs/mpage.c +++ b/fs/mpage.c @@ -6,7 +6,7 @@ * Contains functions related to preparing and submitting BIOs which contain * multiple pagecache pages. * - * 15May2002 akpm@zip.com.au + * 15May2002 Andrew Morton * Initial version * 27Jun2002 axboe@suse.de * use bio_add_page() to build bio's just the right size diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h index 8a62d1e84b9..bb70ebb6a2d 100644 --- a/include/linux/journal-head.h +++ b/include/linux/journal-head.h @@ -3,7 +3,7 @@ * * buffer_head fields for JBD * - * 27 May 2001 Andrew Morton + * 27 May 2001 Andrew Morton * Created - pulled out of fs.h */ diff --git a/include/linux/task_io_accounting.h b/include/linux/task_io_accounting.h index 5e88afc9a2f..bdf855c2856 100644 --- a/include/linux/task_io_accounting.h +++ b/include/linux/task_io_accounting.h @@ -5,7 +5,7 @@ * Don't include this header file directly - it is designed to be dragged in via * sched.h. * - * Blame akpm@osdl.org for all this. + * Blame Andrew Morton for all this. */ struct task_io_accounting { diff --git a/kernel/printk.c b/kernel/printk.c index a430fd04008..c3ab51dc9fa 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -13,7 +13,7 @@ * Fixed SMP synchronization, 08/08/99, Manfred Spraul * manfred@colorfullife.com * Rewrote bits to get rid of console_lock - * 01Mar01 Andrew Morton + * 01Mar01 Andrew Morton */ #include diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 4048e92aa04..714afad4653 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -9,7 +9,7 @@ * Derived from the taskqueue/keventd code by: * * David Woodhouse - * Andrew Morton + * Andrew Morton * Kai Petzke * Theodore Ts'o * diff --git a/mm/fadvise.c b/mm/fadvise.c index 343cfdfebd9..a1da969bd98 100644 --- a/mm/fadvise.c +++ b/mm/fadvise.c @@ -3,7 +3,7 @@ * * Copyright (C) 2002, Linus Torvalds * - * 11Jan2003 akpm@digeo.com + * 11Jan2003 Andrew Morton * Initial version. */ diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 24de8b65fdb..c130a137c12 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -7,7 +7,7 @@ * Contains functions related to writing back dirty pages at the * address_space level. * - * 10Apr2002 akpm@zip.com.au + * 10Apr2002 Andrew Morton * Initial version */ diff --git a/mm/pdflush.c b/mm/pdflush.c index 0cbe0c60c6b..a0a14c4d507 100644 --- a/mm/pdflush.c +++ b/mm/pdflush.c @@ -3,7 +3,7 @@ * * Copyright (C) 2002, Linus Torvalds. * - * 09Apr2002 akpm@zip.com.au + * 09Apr2002 Andrew Morton * Initial version * 29Feb2004 kaos@sgi.com * Move worker thread creation to kthread to avoid chewing diff --git a/mm/readahead.c b/mm/readahead.c index 77e8ddf945e..6cbd9a72fde 100644 --- a/mm/readahead.c +++ b/mm/readahead.c @@ -3,7 +3,7 @@ * * Copyright (C) 2002, Linus Torvalds * - * 09Apr2002 akpm@zip.com.au + * 09Apr2002 Andrew Morton * Initial version. */ diff --git a/mm/truncate.c b/mm/truncate.c index 6650c1d878b..e83e4b114ef 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -3,7 +3,7 @@ * * Copyright (C) 2002, Linus Torvalds * - * 10Sep2002 akpm@zip.com.au + * 10Sep2002 Andrew Morton * Initial version. */ -- cgit v1.2.3-70-g09d2 From 2223c65103d2aa8d0e9c48a956035a1e0353233d Mon Sep 17 00:00:00 2001 From: FD Cami Date: Wed, 15 Oct 2008 22:02:00 -0700 Subject: Remove Andrew Morton's http://www.zip.com.au/~akpm/ Remove Andrew Morton's http://www.zip.com.au/~akpm/ urls, update to new ones when necessary, delete references otherwise. There are still instances of that living in: Documentation/zh_CN/HOWTO Documentation/zh_CN/SubmittingPatches Documentation/ko_KR/HOWTO Documentation/ja_JP/SubmittingPatches Signed-off-by: Francois Cami Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/HOWTO | 4 ++-- Documentation/SubmittingPatches | 4 ++-- Documentation/filesystems/ext3.txt | 3 +-- Documentation/networking/vortex.txt | 5 ----- 4 files changed, 5 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/HOWTO b/Documentation/HOWTO index 48a3955f05f..8495fc97039 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -112,7 +112,7 @@ required reading: Other excellent descriptions of how to create patches properly are: "The Perfect Patch" - http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt + http://userweb.kernel.org/~akpm/stuff/tpp.txt "Linux kernel patch submission format" http://linux.yyz.us/patch-format.html @@ -620,7 +620,7 @@ all time. It should describe the patch completely, containing: For more details on what this should all look like, please see the ChangeLog section of the document: "The Perfect Patch" - http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt + http://userweb.kernel.org/~akpm/stuff/tpp.txt diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index f79ad9ff603..bee87f2842a 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -77,7 +77,7 @@ Quilt: http://savannah.nongnu.org/projects/quilt Andrew Morton's patch scripts: -http://www.zip.com.au/~akpm/linux/patches/ +http://userweb.kernel.org/~akpm/stuff/patch-scripts.tar.gz Instead of these scripts, quilt is the recommended patch management tool (see above). @@ -653,7 +653,7 @@ SECTION 3 - REFERENCES ---------------------- Andrew Morton, "The perfect patch" (tpp). - + Jeff Garzik, "Linux kernel patch submission format". diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt index b45f3c1b8b4..295f26cd895 100644 --- a/Documentation/filesystems/ext3.txt +++ b/Documentation/filesystems/ext3.txt @@ -193,6 +193,5 @@ kernel source: programs: http://e2fsprogs.sourceforge.net/ http://ext2resize.sourceforge.net -useful links: http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html - http://www-106.ibm.com/developerworks/linux/library/l-fs7/ +useful links: http://www-106.ibm.com/developerworks/linux/library/l-fs7/ http://www-106.ibm.com/developerworks/linux/library/l-fs8/ diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt index bd874daabde..bd70976b816 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/vortex.txt @@ -305,11 +305,6 @@ Donald's wake-on-LAN page: ftp://ftp.3com.com/pub/nic/3c90x/3c90xx2.exe -Driver updates and a detailed changelog for the modifications which -were made for the 2.3/2,4 series kernel is available at - - http://www.zip.com.au/~akpm/linux/#3c59x-bc - Autonegotiation notes --------------------- -- cgit v1.2.3-70-g09d2 From 22b8ab66deb2600f93d24d30df17b9d9e5273d05 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Wed, 15 Oct 2008 22:02:01 -0700 Subject: Document panic_on_unrecovered_nmi sysctl This adds "panic_on_unrecovered_nmi" sysctl to Documentation/filesystems/proc.txt. The text is mainly taken from http://readlist.com/lists/vger.kernel.org/linux-kernel/43/217998.html. Signed-off-by: Bernhard Walle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index b488edad743..c032bf39e8b 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1321,6 +1321,18 @@ debugging information is displayed on console. NMI switch that most IA32 servers have fires unknown NMI up, for example. If a system hangs up, try pressing the NMI switch. +panic_on_unrecovered_nmi +------------------------ + +The default Linux behaviour on an NMI of either memory or unknown is to continue +operation. For many environments such as scientific computing it is preferable +that the box is taken out and the error dealt with than an uncorrected +parity/ECC error get propogated. + +A small number of systems do generate NMI's for bizarre random reasons such as +power management so the default is off. That sysctl works like the existing +panic controls already in that directory. + nmi_watchdog ------------ -- cgit v1.2.3-70-g09d2 From 9536727ef696861b205834dd2e01456b91088cb7 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 15 Oct 2008 22:02:02 -0700 Subject: SubmittingPatches: add a reference to Andi's OLS paper For this year's OLS I wrote a paper on successfull strategies to submit difficult kernel patches. Add a reference to it to SubmittingPatches. Signed-off-by: Andi Kleen Acked-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/SubmittingPatches | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index bee87f2842a..7b67f3bf8dd 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -672,4 +672,9 @@ Kernel Documentation/CodingStyle: Linus Torvalds's mail on the canonical patch format: + +Andi Kleen, "On submitting kernel patches" + Some strategies to get difficult or controversal changes in. + http://halobates.de/on-submitting-patches.pdf + -- -- cgit v1.2.3-70-g09d2 From f1f640a9c1d97a1a131879ab1efe3766443904d7 Mon Sep 17 00:00:00 2001 From: Vernon Sauder Date: Wed, 15 Oct 2008 22:02:43 -0700 Subject: pxa2xx_spi: fix chip_info defaults and documentation. Make the chip info structure data optional by providing reasonable defaults. Improve corresponding documentation, and highlight the drawback of not providing explicit chipselect control. DMA can determine appropriate dma_burst_size and thresholds automatically so use DMA even if dma_burst_size is not specified. Signed-off-by: Vernon Sauder Reviewed-by: Ned Forrester Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/spi/pxa2xx | 34 +++++++++++++++++++++++----------- drivers/spi/pxa2xx_spi.c | 46 +++++++++++++++++++++++++++------------------- 2 files changed, 50 insertions(+), 30 deletions(-) (limited to 'Documentation') diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index bbe8dee681a..6bb916d57c9 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -96,7 +96,7 @@ Each slave device attached to the PXA must provide slave specific configuration information via the structure "pxa2xx_spi_chip" found in "arch/arm/mach-pxa/include/mach/pxa2xx_spi.h". The pxa2xx_spi master controller driver will uses the configuration whenever the driver communicates with the slave -device. +device. All fields are optional. struct pxa2xx_spi_chip { u8 tx_threshold; @@ -112,14 +112,17 @@ used to configure the SSP hardware fifo. These fields are critical to the performance of pxa2xx_spi driver and misconfiguration will result in rx fifo overruns (especially in PIO mode transfers). Good default values are - .tx_threshold = 12, - .rx_threshold = 4, + .tx_threshold = 8, + .rx_threshold = 8, + +The range is 1 to 16 where zero indicates "use default". The "pxa2xx_spi_chip.dma_burst_size" field is used to configure PXA2xx DMA engine and is related the "spi_device.bits_per_word" field. Read and understand the PXA2xx "Developer Manual" sections on the DMA controller and SSP Controllers to determine the correct value. An SSP configured for byte-wide transfers would -use a value of 8. +use a value of 8. The driver will determine a reasonable default if +dma_burst_size == 0. The "pxa2xx_spi_chip.timeout" fields is used to efficiently handle trailing bytes in the SSP receiver fifo. The correct value for this field is @@ -137,7 +140,13 @@ function for asserting/deasserting a slave device chip select. If the field is NULL, the pxa2xx_spi master controller driver assumes that the SSP port is configured to use SSPFRM instead. -NSSP SALVE SAMPLE +NOTE: the SPI driver cannot control the chip select if SSPFRM is used, so the +chipselect is dropped after each spi_transfer. Most devices need chip select +asserted around the complete message. Use SSPFRM as a GPIO (through cs_control) +to accomodate these chips. + + +NSSP SLAVE SAMPLE ----------------- The pxa2xx_spi_chip structure is passed to the pxa2xx_spi driver in the "spi_board_info.controller_data" field. Below is a sample configuration using @@ -206,18 +215,21 @@ static void __init streetracer_init(void) DMA and PIO I/O Support ----------------------- -The pxa2xx_spi driver support both DMA and interrupt driven PIO message -transfers. The driver defaults to PIO mode and DMA transfers must enabled by -setting the "enable_dma" flag in the "pxa2xx_spi_master" structure and -ensuring that the "pxa2xx_spi_chip.dma_burst_size" field is non-zero. The DMA -mode support both coherent and stream based DMA mappings. +The pxa2xx_spi driver supports both DMA and interrupt driven PIO message +transfers. The driver defaults to PIO mode and DMA transfers must be enabled +by setting the "enable_dma" flag in the "pxa2xx_spi_master" structure. The DMA +mode supports both coherent and stream based DMA mappings. The following logic is used to determine the type of I/O to be used on a per "spi_transfer" basis: -if !enable_dma or dma_burst_size == 0 then +if !enable_dma then always use PIO transfers +if spi_message.len > 8191 then + print "rate limited" warning + use PIO transfers + if spi_message.is_dma_mapped and rx_dma_buf != 0 and tx_dma_buf != 0 then use coherent DMA mode diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 59ae3ed1665..dae87b1a4c6 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -47,6 +47,10 @@ MODULE_ALIAS("platform:pxa2xx-spi"); #define MAX_BUSES 3 +#define RX_THRESH_DFLT 8 +#define TX_THRESH_DFLT 8 +#define TIMOUT_DFLT 1000 + #define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) #define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) #define IS_DMA_ALIGNED(x) ((((u32)(x)) & 0x07) == 0) @@ -1171,6 +1175,8 @@ static int setup(struct spi_device *spi) struct driver_data *drv_data = spi_master_get_devdata(spi->master); struct ssp_device *ssp = drv_data->ssp; unsigned int clk_div; + uint tx_thres = TX_THRESH_DFLT; + uint rx_thres = RX_THRESH_DFLT; if (!spi->bits_per_word) spi->bits_per_word = 8; @@ -1209,8 +1215,7 @@ static int setup(struct spi_device *spi) chip->cs_control = null_cs_control; chip->enable_dma = 0; - chip->timeout = 1000; - chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1); + chip->timeout = TIMOUT_DFLT; chip->dma_burst_size = drv_data->master_info->enable_dma ? DCMD_BURST8 : 0; } @@ -1224,22 +1229,21 @@ static int setup(struct spi_device *spi) if (chip_info) { if (chip_info->cs_control) chip->cs_control = chip_info->cs_control; - - chip->timeout = chip_info->timeout; - - chip->threshold = (SSCR1_RxTresh(chip_info->rx_threshold) & - SSCR1_RFT) | - (SSCR1_TxTresh(chip_info->tx_threshold) & - SSCR1_TFT); - - chip->enable_dma = chip_info->dma_burst_size != 0 - && drv_data->master_info->enable_dma; + if (chip_info->timeout) + chip->timeout = chip_info->timeout; + if (chip_info->tx_threshold) + tx_thres = chip_info->tx_threshold; + if (chip_info->rx_threshold) + rx_thres = chip_info->rx_threshold; + chip->enable_dma = drv_data->master_info->enable_dma; chip->dma_threshold = 0; - if (chip_info->enable_loopback) chip->cr1 = SSCR1_LBM; } + chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) | + (SSCR1_TxTresh(tx_thres) & SSCR1_TFT); + /* set dma burst and threshold outside of chip_info path so that if * chip_info goes away after setting chip->enable_dma, the * burst and threshold can still respond to changes in bits_per_word */ @@ -1268,17 +1272,19 @@ static int setup(struct spi_device *spi) /* NOTE: PXA25x_SSP _could_ use external clocking ... */ if (drv_data->ssp_type != PXA25x_SSP) - dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n", + dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n", spi->bits_per_word, clk_get_rate(ssp->clk) / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), - spi->mode & 0x3); + spi->mode & 0x3, + chip->enable_dma ? "DMA" : "PIO"); else - dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n", + dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n", spi->bits_per_word, - clk_get_rate(ssp->clk) + clk_get_rate(ssp->clk) / 2 / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), - spi->mode & 0x3); + spi->mode & 0x3, + chip->enable_dma ? "DMA" : "PIO"); if (spi->bits_per_word <= 8) { chip->n_bytes = 1; @@ -1498,7 +1504,9 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) /* Load default SSP configuration */ write_SSCR0(0, drv_data->ioaddr); - write_SSCR1(SSCR1_RxTresh(4) | SSCR1_TxTresh(12), drv_data->ioaddr); + write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) | + SSCR1_TxTresh(TX_THRESH_DFLT), + drv_data->ioaddr); write_SSCR0(SSCR0_SerClkDiv(2) | SSCR0_Motorola | SSCR0_DataSize(8), -- cgit v1.2.3-70-g09d2 From 4b22ff13415fa30b6282c88da790c82b4c6e5127 Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Wed, 15 Oct 2008 22:02:53 -0700 Subject: autofs4: device node ioctl documentation Add documentation for the miscellaneous device module of autofs4. Signed-off-by: Ian Kent Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .../filesystems/autofs4-mount-control.txt | 393 +++++++++++++++++++++ 1 file changed, 393 insertions(+) create mode 100644 Documentation/filesystems/autofs4-mount-control.txt (limited to 'Documentation') diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt new file mode 100644 index 00000000000..c6341745df3 --- /dev/null +++ b/Documentation/filesystems/autofs4-mount-control.txt @@ -0,0 +1,393 @@ + +Miscellaneous Device control operations for the autofs4 kernel module +==================================================================== + +The problem +=========== + +There is a problem with active restarts in autofs (that is to say +restarting autofs when there are busy mounts). + +During normal operation autofs uses a file descriptor opened on the +directory that is being managed in order to be able to issue control +operations. Using a file descriptor gives ioctl operations access to +autofs specific information stored in the super block. The operations +are things such as setting an autofs mount catatonic, setting the +expire timeout and requesting expire checks. As is explained below, +certain types of autofs triggered mounts can end up covering an autofs +mount itself which prevents us being able to use open(2) to obtain a +file descriptor for these operations if we don't already have one open. + +Currently autofs uses "umount -l" (lazy umount) to clear active mounts +at restart. While using lazy umount works for most cases, anything that +needs to walk back up the mount tree to construct a path, such as +getcwd(2) and the proc file system /proc//cwd, no longer works +because the point from which the path is constructed has been detached +from the mount tree. + +The actual problem with autofs is that it can't reconnect to existing +mounts. Immediately one thinks of just adding the ability to remount +autofs file systems would solve it, but alas, that can't work. This is +because autofs direct mounts and the implementation of "on demand mount +and expire" of nested mount trees have the file system mounted directly +on top of the mount trigger directory dentry. + +For example, there are two types of automount maps, direct (in the kernel +module source you will see a third type called an offset, which is just +a direct mount in disguise) and indirect. + +Here is a master map with direct and indirect map entries: + +/- /etc/auto.direct +/test /etc/auto.indirect + +and the corresponding map files: + +/etc/auto.direct: + +/automount/dparse/g6 budgie:/autofs/export1 +/automount/dparse/g1 shark:/autofs/export1 +and so on. + +/etc/auto.indirect: + +g1 shark:/autofs/export1 +g6 budgie:/autofs/export1 +and so on. + +For the above indirect map an autofs file system is mounted on /test and +mounts are triggered for each sub-directory key by the inode lookup +operation. So we see a mount of shark:/autofs/export1 on /test/g1, for +example. + +The way that direct mounts are handled is by making an autofs mount on +each full path, such as /automount/dparse/g1, and using it as a mount +trigger. So when we walk on the path we mount shark:/autofs/export1 "on +top of this mount point". Since these are always directories we can +use the follow_link inode operation to trigger the mount. + +But, each entry in direct and indirect maps can have offsets (making +them multi-mount map entries). + +For example, an indirect mount map entry could also be: + +g1 \ + / shark:/autofs/export5/testing/test \ + /s1 shark:/autofs/export/testing/test/s1 \ + /s2 shark:/autofs/export5/testing/test/s2 \ + /s1/ss1 shark:/autofs/export1 \ + /s2/ss2 shark:/autofs/export2 + +and a similarly a direct mount map entry could also be: + +/automount/dparse/g1 \ + / shark:/autofs/export5/testing/test \ + /s1 shark:/autofs/export/testing/test/s1 \ + /s2 shark:/autofs/export5/testing/test/s2 \ + /s1/ss1 shark:/autofs/export2 \ + /s2/ss2 shark:/autofs/export2 + +One of the issues with version 4 of autofs was that, when mounting an +entry with a large number of offsets, possibly with nesting, we needed +to mount and umount all of the offsets as a single unit. Not really a +problem, except for people with a large number of offsets in map entries. +This mechanism is used for the well known "hosts" map and we have seen +cases (in 2.4) where the available number of mounts are exhausted or +where the number of privileged ports available is exhausted. + +In version 5 we mount only as we go down the tree of offsets and +similarly for expiring them which resolves the above problem. There is +somewhat more detail to the implementation but it isn't needed for the +sake of the problem explanation. The one important detail is that these +offsets are implemented using the same mechanism as the direct mounts +above and so the mount points can be covered by a mount. + +The current autofs implementation uses an ioctl file descriptor opened +on the mount point for control operations. The references held by the +descriptor are accounted for in checks made to determine if a mount is +in use and is also used to access autofs file system information held +in the mount super block. So the use of a file handle needs to be +retained. + + +The Solution +============ + +To be able to restart autofs leaving existing direct, indirect and +offset mounts in place we need to be able to obtain a file handle +for these potentially covered autofs mount points. Rather than just +implement an isolated operation it was decided to re-implement the +existing ioctl interface and add new operations to provide this +functionality. + +In addition, to be able to reconstruct a mount tree that has busy mounts, +the uid and gid of the last user that triggered the mount needs to be +available because these can be used as macro substitution variables in +autofs maps. They are recorded at mount request time and an operation +has been added to retrieve them. + +Since we're re-implementing the control interface, a couple of other +problems with the existing interface have been addressed. First, when +a mount or expire operation completes a status is returned to the +kernel by either a "send ready" or a "send fail" operation. The +"send fail" operation of the ioctl interface could only ever send +ENOENT so the re-implementation allows user space to send an actual +status. Another expensive operation in user space, for those using +very large maps, is discovering if a mount is present. Usually this +involves scanning /proc/mounts and since it needs to be done quite +often it can introduce significant overhead when there are many entries +in the mount table. An operation to lookup the mount status of a mount +point dentry (covered or not) has also been added. + +Current kernel development policy recommends avoiding the use of the +ioctl mechanism in favor of systems such as Netlink. An implementation +using this system was attempted to evaluate its suitability and it was +found to be inadequate, in this case. The Generic Netlink system was +used for this as raw Netlink would lead to a significant increase in +complexity. There's no question that the Generic Netlink system is an +elegant solution for common case ioctl functions but it's not a complete +replacement probably because it's primary purpose in life is to be a +message bus implementation rather than specifically an ioctl replacement. +While it would be possible to work around this there is one concern +that lead to the decision to not use it. This is that the autofs +expire in the daemon has become far to complex because umount +candidates are enumerated, almost for no other reason than to "count" +the number of times to call the expire ioctl. This involves scanning +the mount table which has proved to be a big overhead for users with +large maps. The best way to improve this is try and get back to the +way the expire was done long ago. That is, when an expire request is +issued for a mount (file handle) we should continually call back to +the daemon until we can't umount any more mounts, then return the +appropriate status to the daemon. At the moment we just expire one +mount at a time. A Generic Netlink implementation would exclude this +possibility for future development due to the requirements of the +message bus architecture. + + +autofs4 Miscellaneous Device mount control interface +==================================================== + +The control interface is opening a device node, typically /dev/autofs. + +All the ioctls use a common structure to pass the needed parameter +information and return operation results: + +struct autofs_dev_ioctl { + __u32 ver_major; + __u32 ver_minor; + __u32 size; /* total size of data passed in + * including this struct */ + __s32 ioctlfd; /* automount command fd */ + + __u32 arg1; /* Command parameters */ + __u32 arg2; + + char path[0]; +}; + +The ioctlfd field is a mount point file descriptor of an autofs mount +point. It is returned by the open call and is used by all calls except +the check for whether a given path is a mount point, where it may +optionally be used to check a specific mount corresponding to a given +mount point file descriptor, and when requesting the uid and gid of the +last successful mount on a directory within the autofs file system. + +The fields arg1 and arg2 are used to communicate parameters and results of +calls made as described below. + +The path field is used to pass a path where it is needed and the size field +is used account for the increased structure length when translating the +structure sent from user space. + +This structure can be initialized before setting specific fields by using +the void function call init_autofs_dev_ioctl(struct autofs_dev_ioctl *). + +All of the ioctls perform a copy of this structure from user space to +kernel space and return -EINVAL if the size parameter is smaller than +the structure size itself, -ENOMEM if the kernel memory allocation fails +or -EFAULT if the copy itself fails. Other checks include a version check +of the compiled in user space version against the module version and a +mismatch results in a -EINVAL return. If the size field is greater than +the structure size then a path is assumed to be present and is checked to +ensure it begins with a "/" and is NULL terminated, otherwise -EINVAL is +returned. Following these checks, for all ioctl commands except +AUTOFS_DEV_IOCTL_VERSION_CMD, AUTOFS_DEV_IOCTL_OPENMOUNT_CMD and +AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD the ioctlfd is validated and if it is +not a valid descriptor or doesn't correspond to an autofs mount point +an error of -EBADF, -ENOTTY or -EINVAL (not an autofs descriptor) is +returned. + + +The ioctls +========== + +An example of an implementation which uses this interface can be seen +in autofs version 5.0.4 and later in file lib/dev-ioctl-lib.c of the +distribution tar available for download from kernel.org in directory +/pub/linux/daemons/autofs/v5. + +The device node ioctl operations implemented by this interface are: + + +AUTOFS_DEV_IOCTL_VERSION +------------------------ + +Get the major and minor version of the autofs4 device ioctl kernel module +implementation. It requires an initialized struct autofs_dev_ioctl as an +input parameter and sets the version information in the passed in structure. +It returns 0 on success or the error -EINVAL if a version mismatch is +detected. + + +AUTOFS_DEV_IOCTL_PROTOVER_CMD and AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD +------------------------------------------------------------------ + +Get the major and minor version of the autofs4 protocol version understood +by loaded module. This call requires an initialized struct autofs_dev_ioctl +with the ioctlfd field set to a valid autofs mount point descriptor +and sets the requested version number in structure field arg1. These +commands return 0 on success or one of the negative error codes if +validation fails. + + +AUTOFS_DEV_IOCTL_OPENMOUNT and AUTOFS_DEV_IOCTL_CLOSEMOUNT +---------------------------------------------------------- + +Obtain and release a file descriptor for an autofs managed mount point +path. The open call requires an initialized struct autofs_dev_ioctl with +the the path field set and the size field adjusted appropriately as well +as the arg1 field set to the device number of the autofs mount. The +device number can be obtained from the mount options shown in +/proc/mounts. The close call requires an initialized struct +autofs_dev_ioct with the ioctlfd field set to the descriptor obtained +from the open call. The release of the file descriptor can also be done +with close(2) so any open descriptors will also be closed at process exit. +The close call is included in the implemented operations largely for +completeness and to provide for a consistent user space implementation. + + +AUTOFS_DEV_IOCTL_READY_CMD and AUTOFS_DEV_IOCTL_FAIL_CMD +-------------------------------------------------------- + +Return mount and expire result status from user space to the kernel. +Both of these calls require an initialized struct autofs_dev_ioctl +with the ioctlfd field set to the descriptor obtained from the open +call and the arg1 field set to the wait queue token number, received +by user space in the foregoing mount or expire request. The arg2 field +is set to the status to be returned. For the ready call this is always +0 and for the fail call it is set to the errno of the operation. + + +AUTOFS_DEV_IOCTL_SETPIPEFD_CMD +------------------------------ + +Set the pipe file descriptor used for kernel communication to the daemon. +Normally this is set at mount time using an option but when reconnecting +to a existing mount we need to use this to tell the autofs mount about +the new kernel pipe descriptor. In order to protect mounts against +incorrectly setting the pipe descriptor we also require that the autofs +mount be catatonic (see next call). + +The call requires an initialized struct autofs_dev_ioctl with the +ioctlfd field set to the descriptor obtained from the open call and +the arg1 field set to descriptor of the pipe. On success the call +also sets the process group id used to identify the controlling process +(eg. the owning automount(8) daemon) to the process group of the caller. + + +AUTOFS_DEV_IOCTL_CATATONIC_CMD +------------------------------ + +Make the autofs mount point catatonic. The autofs mount will no longer +issue mount requests, the kernel communication pipe descriptor is released +and any remaining waits in the queue released. + +The call requires an initialized struct autofs_dev_ioctl with the +ioctlfd field set to the descriptor obtained from the open call. + + +AUTOFS_DEV_IOCTL_TIMEOUT_CMD +---------------------------- + +Set the expire timeout for mounts withing an autofs mount point. + +The call requires an initialized struct autofs_dev_ioctl with the +ioctlfd field set to the descriptor obtained from the open call. + + +AUTOFS_DEV_IOCTL_REQUESTER_CMD +------------------------------ + +Return the uid and gid of the last process to successfully trigger a the +mount on the given path dentry. + +The call requires an initialized struct autofs_dev_ioctl with the path +field set to the mount point in question and the size field adjusted +appropriately as well as the arg1 field set to the device number of the +containing autofs mount. Upon return the struct field arg1 contains the +uid and arg2 the gid. + +When reconstructing an autofs mount tree with active mounts we need to +re-connect to mounts that may have used the original process uid and +gid (or string variations of them) for mount lookups within the map entry. +This call provides the ability to obtain this uid and gid so they may be +used by user space for the mount map lookups. + + +AUTOFS_DEV_IOCTL_EXPIRE_CMD +--------------------------- + +Issue an expire request to the kernel for an autofs mount. Typically +this ioctl is called until no further expire candidates are found. + +The call requires an initialized struct autofs_dev_ioctl with the +ioctlfd field set to the descriptor obtained from the open call. In +addition an immediate expire, independent of the mount timeout, can be +requested by setting the arg1 field to 1. If no expire candidates can +be found the ioctl returns -1 with errno set to EAGAIN. + +This call causes the kernel module to check the mount corresponding +to the given ioctlfd for mounts that can be expired, issues an expire +request back to the daemon and waits for completion. + +AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD +------------------------------ + +Checks if an autofs mount point is in use. + +The call requires an initialized struct autofs_dev_ioctl with the +ioctlfd field set to the descriptor obtained from the open call and +it returns the result in the arg1 field, 1 for busy and 0 otherwise. + + +AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD +--------------------------------- + +Check if the given path is a mountpoint. + +The call requires an initialized struct autofs_dev_ioctl. There are two +possible variations. Both use the path field set to the path of the mount +point to check and the size field adjusted appropriately. One uses the +ioctlfd field to identify a specific mount point to check while the other +variation uses the path and optionaly arg1 set to an autofs mount type. +The call returns 1 if this is a mount point and sets arg1 to the device +number of the mount and field arg2 to the relevant super block magic +number (described below) or 0 if it isn't a mountpoint. In both cases +the the device number (as returned by new_encode_dev()) is returned +in field arg1. + +If supplied with a file descriptor we're looking for a specific mount, +not necessarily at the top of the mounted stack. In this case the path +the descriptor corresponds to is considered a mountpoint if it is itself +a mountpoint or contains a mount, such as a multi-mount without a root +mount. In this case we return 1 if the descriptor corresponds to a mount +point and and also returns the super magic of the covering mount if there +is one or 0 if it isn't a mountpoint. + +If a path is supplied (and the ioctlfd field is set to -1) then the path +is looked up and is checked to see if it is the root of a mount. If a +type is also given we are looking for a particular autofs mount and if +a match isn't found a fail is returned. If the the located path is the +root of a mount 1 is returned along with the super magic of the mount +or 0 otherwise. + -- cgit v1.2.3-70-g09d2 From 0f6d504e73b49374c6093efe6aa60ab55058248a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 15 Oct 2008 22:03:14 -0700 Subject: gpiolib: gpio_to_irq() hooks Add a new gpiolib mechanism: gpio_chip instances can provide mappings between their (input) GPIOs and any associated IRQs. This makes it easier for platforms to support IRQs that are provided by board-specific external chips instead of as part of their core (such as SOC-integrated GPIOs). Also update the irq_to_gpio() description, saying to avoid it because it's not always supported. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/gpio.txt | 5 +++-- drivers/gpio/gpiolib.c | 18 ++++++++++++++++++ include/asm-generic/gpio.h | 7 +++++++ 3 files changed, 28 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index 18022e249c5..8a7c45956d2 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -264,7 +264,7 @@ map between them using calls like: /* map GPIO numbers to IRQ numbers */ int gpio_to_irq(unsigned gpio); - /* map IRQ numbers to GPIO numbers */ + /* map IRQ numbers to GPIO numbers (avoid using this) */ int irq_to_gpio(unsigned irq); Those return either the corresponding number in the other namespace, or @@ -284,7 +284,8 @@ system wakeup capabilities. Non-error values returned from irq_to_gpio() would most commonly be used with gpio_get_value(), for example to initialize or update driver state -when the IRQ is edge-triggered. +when the IRQ is edge-triggered. Note that some platforms don't support +this reverse mapping, so you should avoid using it. Emulating Open Drain Signals diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 317004fd94f..29a7e6b1be5 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1010,6 +1010,24 @@ int __gpio_cansleep(unsigned gpio) } EXPORT_SYMBOL_GPL(__gpio_cansleep); +/** + * __gpio_to_irq() - return the IRQ corresponding to a GPIO + * @gpio: gpio whose IRQ will be returned (already requested) + * Context: any + * + * This is used directly or indirectly to implement gpio_to_irq(). + * It returns the number of the IRQ signaled by this (input) GPIO, + * or a negative errno. + */ +int __gpio_to_irq(unsigned gpio) +{ + struct gpio_chip *chip; + + chip = gpio_to_chip(gpio); + return chip->to_irq ? chip->to_irq(chip, gpio - chip->base) : -ENXIO; +} +EXPORT_SYMBOL_GPL(__gpio_to_irq); + /* There's no value in making it easy to inline GPIO calls that may sleep. diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 2c5744b66de..04cb1d175df 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -40,6 +40,8 @@ struct module; * returns either the value actually sensed, or zero * @direction_output: configures signal "offset" as output, or returns error * @set: assigns output value for signal "offset" + * @to_irq: optional hook supporting non-static gpio_to_irq() mappings; + * implementation may not sleep * @dbg_show: optional routine to show contents in debugfs; default code * will be used when this is omitted, but custom code can show extra * state (such as pullup/pulldown configuration). @@ -73,6 +75,10 @@ struct gpio_chip { unsigned offset, int value); void (*set)(struct gpio_chip *chip, unsigned offset, int value); + + int (*to_irq)(struct gpio_chip *chip, + unsigned offset); + void (*dbg_show)(struct seq_file *s, struct gpio_chip *chip); int base; @@ -112,6 +118,7 @@ extern void __gpio_set_value(unsigned gpio, int value); extern int __gpio_cansleep(unsigned gpio); +extern int __gpio_to_irq(unsigned gpio); #ifdef CONFIG_GPIO_SYSFS -- cgit v1.2.3-70-g09d2 From 35e8bb5175c1a6ff6253f1a2acb30bfe52a2f500 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 15 Oct 2008 22:03:16 -0700 Subject: gpiolib: request/free hooks Add a new internal mechanism to gpiolib to support low power operations by letting gpio_chip instances see when their GPIOs are in use. When no GPIOs are active, chips may be able to enter lower powered runtime states by disabling clocks and/or power domains. Signed-off-by: David Brownell Cc: "Magnus Damm" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/gpio.txt | 4 ++ drivers/gpio/gpiolib.c | 91 +++++++++++++++++++++++++++++++++++++++------- include/asm-generic/gpio.h | 9 +++++ 3 files changed, 91 insertions(+), 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index 8a7c45956d2..b1b98870124 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -240,6 +240,10 @@ signal, or (b) something wrongly believes it's safe to remove drivers needed to manage a signal that's in active use. That is, requesting a GPIO can serve as a kind of lock. +Some platforms may also use knowledge about what GPIOs are active for +power management, such as by powering down unused chip sectors and, more +easily, gating off unused clocks. + These two calls are optional because not not all current Linux platforms offer such functionality in their GPIO support; a valid implementation could return success for all gpio_request() calls. Unlike the other calls, diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 29a7e6b1be5..9112830107a 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -67,17 +67,28 @@ static inline void desc_set_label(struct gpio_desc *d, const char *label) * when setting direction, and otherwise illegal. Until board setup code * and drivers use explicit requests everywhere (which won't happen when * those calls have no teeth) we can't avoid autorequesting. This nag - * message should motivate switching to explicit requests... + * message should motivate switching to explicit requests... so should + * the weaker cleanup after faults, compared to gpio_request(). */ -static void gpio_ensure_requested(struct gpio_desc *desc) +static int gpio_ensure_requested(struct gpio_desc *desc, unsigned offset) { if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) { - pr_warning("GPIO-%d autorequested\n", (int)(desc - gpio_desc)); + struct gpio_chip *chip = desc->chip; + int gpio = chip->base + offset; + + if (!try_module_get(chip->owner)) { + pr_err("GPIO-%d: module can't be gotten \n", gpio); + clear_bit(FLAG_REQUESTED, &desc->flags); + /* lose */ + return -EIO; + } + pr_warning("GPIO-%d autorequested\n", gpio); desc_set_label(desc, "[auto]"); - if (!try_module_get(desc->chip->owner)) - pr_err("GPIO-%d: module can't be gotten \n", - (int)(desc - gpio_desc)); + /* caller must chip->request() w/o spinlock */ + if (chip->request) + return 1; } + return 0; } /* caller holds gpio_lock *OR* gpio is marked as requested */ @@ -752,6 +763,7 @@ EXPORT_SYMBOL_GPL(gpiochip_remove); int gpio_request(unsigned gpio, const char *label) { struct gpio_desc *desc; + struct gpio_chip *chip; int status = -EINVAL; unsigned long flags; @@ -760,14 +772,15 @@ int gpio_request(unsigned gpio, const char *label) if (!gpio_is_valid(gpio)) goto done; desc = &gpio_desc[gpio]; - if (desc->chip == NULL) + chip = desc->chip; + if (chip == NULL) goto done; - if (!try_module_get(desc->chip->owner)) + if (!try_module_get(chip->owner)) goto done; /* NOTE: gpio_request() can be called in early boot, - * before IRQs are enabled. + * before IRQs are enabled, for non-sleeping (SOC) GPIOs. */ if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) { @@ -775,7 +788,20 @@ int gpio_request(unsigned gpio, const char *label) status = 0; } else { status = -EBUSY; - module_put(desc->chip->owner); + module_put(chip->owner); + } + + if (chip->request) { + /* chip->request may sleep */ + spin_unlock_irqrestore(&gpio_lock, flags); + status = chip->request(chip, gpio - chip->base); + spin_lock_irqsave(&gpio_lock, flags); + + if (status < 0) { + desc_set_label(desc, NULL); + module_put(chip->owner); + clear_bit(FLAG_REQUESTED, &desc->flags); + } } done: @@ -791,6 +817,7 @@ void gpio_free(unsigned gpio) { unsigned long flags; struct gpio_desc *desc; + struct gpio_chip *chip; might_sleep(); @@ -804,9 +831,17 @@ void gpio_free(unsigned gpio) spin_lock_irqsave(&gpio_lock, flags); desc = &gpio_desc[gpio]; - if (desc->chip && test_and_clear_bit(FLAG_REQUESTED, &desc->flags)) { + chip = desc->chip; + if (chip && test_bit(FLAG_REQUESTED, &desc->flags)) { + if (chip->free) { + spin_unlock_irqrestore(&gpio_lock, flags); + might_sleep_if(extra_checks && chip->can_sleep); + chip->free(chip, gpio - chip->base); + spin_lock_irqsave(&gpio_lock, flags); + } desc_set_label(desc, NULL); module_put(desc->chip->owner); + clear_bit(FLAG_REQUESTED, &desc->flags); } else WARN_ON(extra_checks); @@ -871,7 +906,9 @@ int gpio_direction_input(unsigned gpio) gpio -= chip->base; if (gpio >= chip->ngpio) goto fail; - gpio_ensure_requested(desc); + status = gpio_ensure_requested(desc, gpio); + if (status < 0) + goto fail; /* now we know the gpio is valid and chip won't vanish */ @@ -879,9 +916,22 @@ int gpio_direction_input(unsigned gpio) might_sleep_if(extra_checks && chip->can_sleep); + if (status) { + status = chip->request(chip, gpio); + if (status < 0) { + pr_debug("GPIO-%d: chip request fail, %d\n", + chip->base + gpio, status); + /* and it's not available to anyone else ... + * gpio_request() is the fully clean solution. + */ + goto lose; + } + } + status = chip->direction_input(chip, gpio); if (status == 0) clear_bit(FLAG_IS_OUT, &desc->flags); +lose: return status; fail: spin_unlock_irqrestore(&gpio_lock, flags); @@ -909,7 +959,9 @@ int gpio_direction_output(unsigned gpio, int value) gpio -= chip->base; if (gpio >= chip->ngpio) goto fail; - gpio_ensure_requested(desc); + status = gpio_ensure_requested(desc, gpio); + if (status < 0) + goto fail; /* now we know the gpio is valid and chip won't vanish */ @@ -917,9 +969,22 @@ int gpio_direction_output(unsigned gpio, int value) might_sleep_if(extra_checks && chip->can_sleep); + if (status) { + status = chip->request(chip, gpio); + if (status < 0) { + pr_debug("GPIO-%d: chip request fail, %d\n", + chip->base + gpio, status); + /* and it's not available to anyone else ... + * gpio_request() is the fully clean solution. + */ + goto lose; + } + } + status = chip->direction_output(chip, gpio, value); if (status == 0) set_bit(FLAG_IS_OUT, &desc->flags); +lose: return status; fail: spin_unlock_irqrestore(&gpio_lock, flags); diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 04cb1d175df..81797ec9ab2 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -35,6 +35,10 @@ struct module; * @label: for diagnostics * @dev: optional device providing the GPIOs * @owner: helps prevent removal of modules exporting active GPIOs + * @request: optional hook for chip-specific activation, such as + * enabling module power and clock; may sleep + * @free: optional hook for chip-specific deactivation, such as + * disabling module power and clock; may sleep * @direction_input: configures signal "offset" as input, or returns error * @get: returns value for signal "offset"; for output signals this * returns either the value actually sensed, or zero @@ -67,6 +71,11 @@ struct gpio_chip { struct device *dev; struct module *owner; + int (*request)(struct gpio_chip *chip, + unsigned offset); + void (*free)(struct gpio_chip *chip, + unsigned offset); + int (*direction_input)(struct gpio_chip *chip, unsigned offset); int (*get)(struct gpio_chip *chip, -- cgit v1.2.3-70-g09d2 From 09a525ec1cf5a142f2e73f15527c169dafc6ff52 Mon Sep 17 00:00:00 2001 From: Joseph Chan Date: Wed, 15 Oct 2008 22:03:19 -0700 Subject: viafb: viafb.modes, viafb.txt Correct via_fb_ to viafb_ and remove the Kconfig part in viafb.txt. viafb.modes: supported mode table viafb.txt: documentation of viafb driver Signed-off-by: Joseph Chan Cc: Krzysztof Helt Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/fb/viafb.modes | 870 +++++++++++++++++++++++++++++++++++++++++++ Documentation/fb/viafb.txt | 214 +++++++++++ 2 files changed, 1084 insertions(+) create mode 100644 Documentation/fb/viafb.modes create mode 100644 Documentation/fb/viafb.txt (limited to 'Documentation') diff --git a/Documentation/fb/viafb.modes b/Documentation/fb/viafb.modes new file mode 100644 index 00000000000..02e5b487f00 --- /dev/null +++ b/Documentation/fb/viafb.modes @@ -0,0 +1,870 @@ +# +# +# These data are based on the CRTC parameters in +# +# VIA Integration Graphics Chip +# (C) 2004 VIA Technologies Inc. +# + +# +# 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) +# +# Horizontal Vertical +# Resolution 640 480 +# Scan Frequency 31.469 kHz 59.94 Hz +# Sync Width 3.813 us 0.064 ms +# 12 chars 2 lines +# Front Porch 0.636 us 0.318 ms +# 2 chars 10 lines +# Back Porch 1.907 us 1.048 ms +# 6 chars 33 lines +# Active Time 25.422 us 15.253 ms +# 80 chars 480 lines +# Blank Time 6.356 us 1.430 ms +# 20 chars 45 lines +# Polarity negative negative +# + +mode "640x480-60" +# D: 25.175 MHz, H: 31.469 kHz, V: 59.94 Hz + geometry 640 480 640 480 32 + timings 39722 48 16 33 10 96 2 endmode mode "480x640-60" +# D: 24.823 MHz, H: 39.780 kHz, V: 60.00 Hz + geometry 480 640 480 640 32 timings 39722 72 24 19 1 48 3 endmode +# +# 640x480, 75 Hz, Non-Interlaced (31.50 MHz dotclock) +# +# Horizontal Vertical +# Resolution 640 480 +# Scan Frequency 37.500 kHz 75.00 Hz +# Sync Width 2.032 us 0.080 ms +# 8 chars 3 lines +# Front Porch 0.508 us 0.027 ms +# 2 chars 1 lines +# Back Porch 3.810 us 0.427 ms +# 15 chars 16 lines +# Active Time 20.317 us 12.800 ms +# 80 chars 480 lines +# Blank Time 6.349 us 0.533 ms +# 25 chars 20 lines +# Polarity negative negative +# + mode "640x480-75" +# D: 31.50 MHz, H: 37.500 kHz, V: 75.00 Hz + geometry 640 480 640 480 32 timings 31747 120 16 16 1 64 3 endmode +# +# 640x480, 85 Hz, Non-Interlaced (36.000 MHz dotclock) +# +# Horizontal Vertical +# Resolution 640 480 +# Scan Frequency 43.269 kHz 85.00 Hz +# Sync Width 1.556 us 0.069 ms +# 7 chars 3 lines +# Front Porch 1.556 us 0.023 ms +# 7 chars 1 lines +# Back Porch 2.222 us 0.578 ms +# 10 chars 25 lines +# Active Time 17.778 us 11.093 ms +# 80 chars 480 lines +# Blank Time 5.333 us 0.670 ms +# 24 chars 29 lines +# Polarity negative negative +# + mode "640x480-85" +# D: 36.000 MHz, H: 43.269 kHz, V: 85.00 Hz + geometry 640 480 640 480 32 timings 27777 80 56 25 1 56 3 endmode +# +# 640x480, 100 Hz, Non-Interlaced (43.163 MHz dotclock) +# +# Horizontal Vertical +# Resolution 640 480 +# Scan Frequency 50.900 kHz 100.00 Hz +# Sync Width 1.483 us 0.058 ms +# 8 chars 3 lines +# Front Porch 0.927 us 0.019 ms +# 5 chars 1 lines +# Back Porch 2.409 us 0.475 ms +# 13 chars 25 lines +# Active Time 14.827 us 9.430 ms +# 80 chars 480 lines +# Blank Time 4.819 us 0.570 ms +# 26 chars 29 lines +# Polarity positive positive +# + mode "640x480-100" +# D: 43.163 MHz, H: 50.900 kHz, V: 100.00 Hz + geometry 640 480 640 480 32 timings 23168 104 40 25 1 64 3 endmode +# +# 640x480, 120 Hz, Non-Interlaced (52.406 MHz dotclock) +# +# Horizontal Vertical +# Resolution 640 480 +# Scan Frequency 61.800 kHz 120.00 Hz +# Sync Width 1.221 us 0.048 ms +# 8 chars 3 lines +# Front Porch 0.763 us 0.016 ms +# 5 chars 1 lines +# Back Porch 1.984 us 0.496 ms +# 13 chars 31 lines +# Active Time 12.212 us 7.767 ms +# 80 chars 480 lines +# Blank Time 3.969 us 0.566 ms +# 26 chars 35 lines +# Polarity positive positive +# + mode "640x480-120" +# D: 52.406 MHz, H: 61.800 kHz, V: 120.00 Hz + geometry 640 480 640 480 32 timings 19081 104 40 31 1 64 3 endmode +# +# 720x480, 60 Hz, Non-Interlaced (26.880 MHz dotclock) +# +# Horizontal Vertical +# Resolution 720 480 +# Scan Frequency 30.000 kHz 60.241 Hz +# Sync Width 2.679 us 0.099 ms +# 9 chars 3 lines +# Front Porch 0.595 us 0.033 ms +# 2 chars 1 lines +# Back Porch 3.274 us 0.462 ms +# 11 chars 14 lines +# Active Time 26.786 us 16.000 ms +# 90 chars 480 lines +# Blank Time 6.548 us 0.600 ms +# 22 chars 18 lines +# Polarity positive positive +# + mode "720x480-60" +# D: 26.880 MHz, H: 30.000 kHz, V: 60.24 Hz + geometry 720 480 720 480 32 timings 37202 88 16 14 1 72 3 endmode +# +# 800x480, 60 Hz, Non-Interlaced (29.581 MHz dotclock) +# +# Horizontal Vertical +# Resolution 800 480 +# Scan Frequency 29.892 kHz 60.00 Hz +# Sync Width 2.704 us 100.604 us +# 10 chars 3 lines +# Front Porch 0.541 us 33.535 us +# 2 chars 1 lines +# Back Porch 3.245 us 435.949 us +# 12 chars 13 lines +# Active Time 27.044 us 16.097 ms +# 100 chars 480 lines +# Blank Time 6.491 us 0.570 ms +# 24 chars 17 lines +# Polarity positive positive +# + mode "800x480-60" +# D: 29.500 MHz, H: 29.738 kHz, V: 60.00 Hz + geometry 800 480 800 480 32 timings 33805 96 24 10 3 72 7 endmode +# +# 720x576, 60 Hz, Non-Interlaced (32.668 MHz dotclock) +# +# Horizontal Vertical +# Resolution 720 576 +# Scan Frequency 35.820 kHz 60.00 Hz +# Sync Width 2.204 us 0.083 ms +# 9 chars 3 lines +# Front Porch 0.735 us 0.027 ms +# 3 chars 1 lines +# Back Porch 2.939 us 0.459 ms +# 12 chars 17 lines +# Active Time 22.040 us 16.080 ms +# 90 chars 476 lines +# Blank Time 5.877 us 0.586 ms +# 24 chars 21 lines +# Polarity positive positive +# + mode "720x576-60" +# D: 32.668 MHz, H: 35.820 kHz, V: 60.00 Hz + geometry 720 576 720 576 32 timings 30611 96 24 17 1 72 3 endmode +# +# 800x600, 60 Hz, Non-Interlaced (40.00 MHz dotclock) +# +# Horizontal Vertical +# Resolution 800 600 +# Scan Frequency 37.879 kHz 60.32 Hz +# Sync Width 3.200 us 0.106 ms +# 16 chars 4 lines +# Front Porch 1.000 us 0.026 ms +# 5 chars 1 lines +# Back Porch 2.200 us 0.607 ms +# 11 chars 23 lines +# Active Time 20.000 us 15.840 ms +# 100 chars 600 lines +# Blank Time 6.400 us 0.739 ms +# 32 chars 28 lines +# Polarity positive positive +# + mode "800x600-60" +# D: 40.00 MHz, H: 37.879 kHz, V: 60.32 Hz + geometry 800 600 800 600 32 + timings 25000 88 40 23 1 128 4 hsync high vsync high endmode +# +# 800x600, 75 Hz, Non-Interlaced (49.50 MHz dotclock) +# +# Horizontal Vertical +# Resolution 800 600 +# Scan Frequency 46.875 kHz 75.00 Hz +# Sync Width 1.616 us 0.064 ms +# 10 chars 3 lines +# Front Porch 0.323 us 0.021 ms +# 2 chars 1 lines +# Back Porch 3.232 us 0.448 ms +# 20 chars 21 lines +# Active Time 16.162 us 12.800 ms +# 100 chars 600 lines +# Blank Time 5.172 us 0.533 ms +# 32 chars 25 lines +# Polarity positive positive +# + mode "800x600-75" +# D: 49.50 MHz, H: 46.875 kHz, V: 75.00 Hz + geometry 800 600 800 600 32 + timings 20203 160 16 21 1 80 3 hsync high vsync high endmode +# +# 800x600, 85 Hz, Non-Interlaced (56.25 MHz dotclock) +# +# Horizontal Vertical +# Resolution 800 600 +# Scan Frequency 53.674 kHz 85.061 Hz +# Sync Width 1.138 us 0.056 ms +# 8 chars 3 lines +# Front Porch 0.569 us 0.019 ms +# 4 chars 1 lines +# Back Porch 2.702 us 0.503 ms +# 19 chars 27 lines +# Active Time 14.222 us 11.179 ms +# 100 chars 600 lines +# Blank Time 4.409 us 0.578 ms +# 31 chars 31 lines +# Polarity positive positive +# + mode "800x600-85" +# D: 56.25 MHz, H: 53.674 kHz, V: 85.061 Hz + geometry 800 600 800 600 32 + timings 17777 152 32 27 1 64 3 hsync high vsync high endmode +# +# 800x600, 100 Hz, Non-Interlaced (67.50 MHz dotclock) +# +# Horizontal Vertical +# Resolution 800 600 +# Scan Frequency 62.500 kHz 100.00 Hz +# Sync Width 0.948 us 0.064 ms +# 8 chars 4 lines +# Front Porch 0.000 us 0.112 ms +# 0 chars 7 lines +# Back Porch 3.200 us 0.224 ms +# 27 chars 14 lines +# Active Time 11.852 us 9.600 ms +# 100 chars 600 lines +# Blank Time 4.148 us 0.400 ms +# 35 chars 25 lines +# Polarity positive positive +# + mode "800x600-100" +# D: 67.50 MHz, H: 62.500 kHz, V: 100.00 Hz + geometry 800 600 800 600 32 + timings 14667 216 0 14 7 64 4 hsync high vsync high endmode +# +# 800x600, 120 Hz, Non-Interlaced (83.950 MHz dotclock) +# +# Horizontal Vertical +# Resolution 800 600 +# Scan Frequency 77.160 kHz 120.00 Hz +# Sync Width 1.048 us 0.039 ms +# 11 chars 3 lines +# Front Porch 0.667 us 0.013 ms +# 7 chars 1 lines +# Back Porch 1.715 us 0.507 ms +# 18 chars 39 lines +# Active Time 9.529 us 7.776 ms +# 100 chars 600 lines +# Blank Time 3.431 us 0.557 ms +# 36 chars 43 lines +# Polarity positive positive +# + mode "800x600-120" +# D: 83.950 MHz, H: 77.160 kHz, V: 120.00 Hz + geometry 800 600 800 600 32 + timings 11912 144 56 39 1 88 3 hsync high vsync high endmode +# +# 848x480, 60 Hz, Non-Interlaced (31.490 MHz dotclock) +# +# Horizontal Vertical +# Resolution 848 480 +# Scan Frequency 29.820 kHz 60.00 Hz +# Sync Width 2.795 us 0.099 ms +# 11 chars 3 lines +# Front Porch 0.508 us 0.033 ms +# 2 chars 1 lines +# Back Porch 3.303 us 0.429 ms +# 13 chars 13 lines +# Active Time 26.929 us 16.097 ms +# 106 chars 480 lines +# Blank Time 6.605 us 0.570 ms +# 26 chars 17 lines +# Polarity positive positive +# + mode "848x480-60" +# D: 31.500 MHz, H: 29.830 kHz, V: 60.00 Hz + geometry 848 480 848 480 32 + timings 31746 104 24 12 3 80 5 hsync high vsync high endmode +# +# 856x480, 60 Hz, Non-Interlaced (31.728 MHz dotclock) +# +# Horizontal Vertical +# Resolution 856 480 +# Scan Frequency 29.820 kHz 60.00 Hz +# Sync Width 2.774 us 0.099 ms +# 11 chars 3 lines +# Front Porch 0.504 us 0.033 ms +# 2 chars 1 lines +# Back Porch 3.728 us 0.429 ms +# 13 chars 13 lines +# Active Time 26.979 us 16.097 ms +# 107 chars 480 lines +# Blank Time 6.556 us 0.570 ms +# 26 chars 17 lines +# Polarity positive positive +# + mode "856x480-60" +# D: 31.728 MHz, H: 29.820 kHz, V: 60.00 Hz + geometry 856 480 856 480 32 + timings 31518 104 16 13 1 88 3 + hsync high vsync high endmode mode "960x600-60" +# D: 45.250 MHz, H: 37.212 kHz, V: 60.00 Hz + geometry 960 600 960 600 32 timings 22099 128 32 15 3 96 6 endmode +# +# 1000x600, 60 Hz, Non-Interlaced (48.068 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1000 600 +# Scan Frequency 37.320 kHz 60.00 Hz +# Sync Width 2.164 us 0.080 ms +# 13 chars 3 lines +# Front Porch 0.832 us 0.027 ms +# 5 chars 1 lines +# Back Porch 2.996 us 0.483 ms +# 18 chars 18 lines +# Active Time 20.804 us 16.077 ms +# 125 chars 600 lines +# Blank Time 5.991 us 0.589 ms +# 36 chars 22 lines +# Polarity negative positive +# + mode "1000x600-60" +# D: 48.068 MHz, H: 37.320 kHz, V: 60.00 Hz + geometry 1000 600 1000 600 32 + timings 20834 144 40 18 1 104 3 endmode mode "1024x576-60" +# D: 46.996 MHz, H: 35.820 kHz, V: 60.00 Hz + geometry 1024 576 1024 576 32 + timings 21278 144 40 17 1 104 3 endmode mode "1024x600-60" +# D: 48.964 MHz, H: 37.320 kHz, V: 60.00 Hz + geometry 1024 600 1024 600 32 + timings 20461 144 40 18 1 104 3 endmode mode "1088x612-60" +# D: 52.952 MHz, H: 38.040 kHz, V: 60.00 Hz + geometry 1088 612 1088 612 32 timings 18877 152 48 16 3 104 5 endmode +# +# 1024x512, 60 Hz, Non-Interlaced (41.291 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1024 512 +# Scan Frequency 31.860 kHz 60.00 Hz +# Sync Width 2.519 us 0.094 ms +# 13 chars 3 lines +# Front Porch 0.775 us 0.031 ms +# 4 chars 1 lines +# Back Porch 3.294 us 0.465 ms +# 17 chars 15 lines +# Active Time 24.800 us 16.070 ms +# 128 chars 512 lines +# Blank Time 6.587 us 0.596 ms +# 34 chars 19 lines +# Polarity positive positive +# + mode "1024x512-60" +# D: 41.291 MHz, H: 31.860 kHz, V: 60.00 Hz + geometry 1024 512 1024 512 32 + timings 24218 126 32 15 1 104 3 hsync high vsync high endmode +# +# 1024x600, 60 Hz, Non-Interlaced (48.875 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1024 768 +# Scan Frequency 37.252 kHz 60.00 Hz +# Sync Width 2.128 us 80.532us +# 13 chars 3 lines +# Front Porch 0.818 us 26.844 us +# 5 chars 1 lines +# Back Porch 2.946 us 483.192 us +# 18 chars 18 lines +# Active Time 20.951 us 16.697 ms +# 128 chars 622 lines +# Blank Time 5.893 us 0.591 ms +# 36 chars 22 lines +# Polarity negative positive +# +#mode "1024x600-60" +# # D: 48.875 MHz, H: 37.252 kHz, V: 60.00 Hz +# geometry 1024 600 1024 600 32 +# timings 20460 144 40 18 1 104 3 +# endmode +# +# 1024x768, 60 Hz, Non-Interlaced (65.00 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1024 768 +# Scan Frequency 48.363 kHz 60.00 Hz +# Sync Width 2.092 us 0.124 ms +# 17 chars 6 lines +# Front Porch 0.369 us 0.062 ms +# 3 chars 3 lines +# Back Porch 2.462 us 0.601 ms +# 20 chars 29 lines +# Active Time 15.754 us 15.880 ms +# 128 chars 768 lines +# Blank Time 4.923 us 0.786 ms +# 40 chars 38 lines +# Polarity negative negative +# + mode "1024x768-60" +# D: 65.00 MHz, H: 48.363 kHz, V: 60.00 Hz + geometry 1024 768 1024 768 32 timings 15385 160 24 29 3 136 6 endmode +# +# 1024x768, 75 Hz, Non-Interlaced (78.75 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1024 768 +# Scan Frequency 60.023 kHz 75.03 Hz +# Sync Width 1.219 us 0.050 ms +# 12 chars 3 lines +# Front Porch 0.203 us 0.017 ms +# 2 chars 1 lines +# Back Porch 2.235 us 0.466 ms +# 22 chars 28 lines +# Active Time 13.003 us 12.795 ms +# 128 chars 768 lines +# Blank Time 3.657 us 0.533 ms +# 36 chars 32 lines +# Polarity positive positive +# + mode "1024x768-75" +# D: 78.75 MHz, H: 60.023 kHz, V: 75.03 Hz + geometry 1024 768 1024 768 32 + timings 12699 176 16 28 1 96 3 hsync high vsync high endmode +# +# 1024x768, 85 Hz, Non-Interlaced (94.50 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1024 768 +# Scan Frequency 68.677 kHz 85.00 Hz +# Sync Width 1.016 us 0.044 ms +# 12 chars 3 lines +# Front Porch 0.508 us 0.015 ms +# 6 chars 1 lines +# Back Porch 2.201 us 0.524 ms +# 26 chars 36 lines +# Active Time 10.836 us 11.183 ms +# 128 chars 768 lines +# Blank Time 3.725 us 0.582 ms +# 44 chars 40 lines +# Polarity positive positive +# + mode "1024x768-85" +# D: 94.50 MHz, H: 68.677 kHz, V: 85.00 Hz + geometry 1024 768 1024 768 32 + timings 10582 208 48 36 1 96 3 hsync high vsync high endmode +# +# 1024x768, 100 Hz, Non-Interlaced (110.0 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1024 768 +# Scan Frequency 79.023 kHz 99.78 Hz +# Sync Width 0.800 us 0.101 ms +# 11 chars 8 lines +# Front Porch 0.000 us 0.000 ms +# 0 chars 0 lines +# Back Porch 2.545 us 0.202 ms +# 35 chars 16 lines +# Active Time 9.309 us 9.719 ms +# 128 chars 768 lines +# Blank Time 3.345 us 0.304 ms +# 46 chars 24 lines +# Polarity negative negative +# + mode "1024x768-100" +# D: 113.3 MHz, H: 79.023 kHz, V: 99.78 Hz + geometry 1024 768 1024 768 32 + timings 8825 280 0 16 0 88 8 endmode mode "1152x720-60" +# D: 66.750 MHz, H: 44.859 kHz, V: 60.00 Hz + geometry 1152 720 1152 720 32 timings 14981 168 56 19 3 112 6 endmode +# +# 1152x864, 75 Hz, Non-Interlaced (110.0 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1152 864 +# Scan Frequency 75.137 kHz 74.99 Hz +# Sync Width 1.309 us 0.106 ms +# 18 chars 8 lines +# Front Porch 0.245 us 0.599 ms +# 3 chars 45 lines +# Back Porch 1.282 us 1.132 ms +# 18 chars 85 lines +# Active Time 10.473 us 11.499 ms +# 144 chars 864 lines +# Blank Time 2.836 us 1.837 ms +# 39 chars 138 lines +# Polarity positive positive +# + mode "1152x864-75" +# D: 110.0 MHz, H: 75.137 kHz, V: 74.99 Hz + geometry 1152 864 1152 864 32 + timings 9259 144 24 85 45 144 8 + hsync high vsync high endmode mode "1200x720-60" +# D: 70.184 MHz, H: 44.760 kHz, V: 60.00 Hz + geometry 1200 720 1200 720 32 + timings 14253 184 28 22 1 128 3 endmode mode "1280x600-60" +# D: 61.503 MHz, H: 37.320 kHz, V: 60.00 Hz + geometry 1280 600 1280 600 32 + timings 16260 184 28 18 1 128 3 endmode mode "1280x720-50" +# D: 60.466 MHz, H: 37.050 kHz, V: 50.00 Hz + geometry 1280 720 1280 720 32 + timings 16538 176 48 17 1 128 3 endmode mode "1280x768-50" +# D: 65.178 MHz, H: 39.550 kHz, V: 50.00 Hz + geometry 1280 768 1280 768 32 timings 15342 184 28 19 1 128 3 endmode +# +# 1280x768, 60 Hz, Non-Interlaced (80.136 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1280 768 +# Scan Frequency 47.700 kHz 60.00 Hz +# Sync Width 1.697 us 0.063 ms +# 17 chars 3 lines +# Front Porch 0.799 us 0.021 ms +# 8 chars 1 lines +# Back Porch 2.496 us 0.483 ms +# 25 chars 23 lines +# Active Time 15.973 us 16.101 ms +# 160 chars 768 lines +# Blank Time 4.992 us 0.566 ms +# 50 chars 27 lines +# Polarity positive positive +# + mode "1280x768-60" +# D: 80.13 MHz, H: 47.700 kHz, V: 60.00 Hz + geometry 1280 768 1280 768 32 + timings 12480 200 48 23 1 126 3 hsync high vsync high endmode +# +# 1280x800, 60 Hz, Non-Interlaced (83.375 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1280 800 +# Scan Frequency 49.628 kHz 60.00 Hz +# Sync Width 1.631 us 60.450 us +# 17 chars 3 lines +# Front Porch 0.768 us 20.15 us +# 8 chars 1 lines +# Back Porch 2.399 us 0.483 ms +# 25 chars 24 lines +# Active Time 15.352 us 16.120 ms +# 160 chars 800 lines +# Blank Time 4.798 us 0.564 ms +# 50 chars 28 lines +# Polarity negtive positive +# + mode "1280x800-60" +# D: 83.500 MHz, H: 49.702 kHz, V: 60.00 Hz + geometry 1280 800 1280 800 32 timings 11994 200 72 22 3 128 6 endmode +# +# 1280x960, 60 Hz, Non-Interlaced (108.00 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1280 960 +# Scan Frequency 60.000 kHz 60.00 Hz +# Sync Width 1.037 us 0.050 ms +# 14 chars 3 lines +# Front Porch 0.889 us 0.017 ms +# 12 chars 1 lines +# Back Porch 2.889 us 0.600 ms +# 39 chars 36 lines +# Active Time 11.852 us 16.000 ms +# 160 chars 960 lines +# Blank Time 4.815 us 0.667 ms +# 65 chars 40 lines +# Polarity positive positive +# + mode "1280x960-60" +# D: 108.00 MHz, H: 60.000 kHz, V: 60.00 Hz + geometry 1280 960 1280 960 32 + timings 9259 312 96 36 1 112 3 hsync high vsync high endmode +# +# 1280x1024, 60 Hz, Non-Interlaced (108.00 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1280 1024 +# Scan Frequency 63.981 kHz 60.02 Hz +# Sync Width 1.037 us 0.047 ms +# 14 chars 3 lines +# Front Porch 0.444 us 0.015 ms +# 6 chars 1 lines +# Back Porch 2.297 us 0.594 ms +# 31 chars 38 lines +# Active Time 11.852 us 16.005 ms +# 160 chars 1024 lines +# Blank Time 3.778 us 0.656 ms +# 51 chars 42 lines +# Polarity positive positive +# + mode "1280x1024-60" +# D: 108.00 MHz, H: 63.981 kHz, V: 60.02 Hz + geometry 1280 1024 1280 1024 32 + timings 9260 248 48 38 1 112 3 hsync high vsync high endmode +# +# 1280x1024, 75 Hz, Non-Interlaced (135.00 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1280 1024 +# Scan Frequency 79.976 kHz 75.02 Hz +# Sync Width 1.067 us 0.038 ms +# 18 chars 3 lines +# Front Porch 0.119 us 0.012 ms +# 2 chars 1 lines +# Back Porch 1.837 us 0.475 ms +# 31 chars 38 lines +# Active Time 9.481 us 12.804 ms +# 160 chars 1024 lines +# Blank Time 3.022 us 0.525 ms +# 51 chars 42 lines +# Polarity positive positive +# + mode "1280x1024-75" +# D: 135.00 MHz, H: 79.976 kHz, V: 75.02 Hz + geometry 1280 1024 1280 1024 32 + timings 7408 248 16 38 1 144 3 hsync high vsync high endmode +# +# 1280x1024, 85 Hz, Non-Interlaced (157.50 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1280 1024 +# Scan Frequency 91.146 kHz 85.02 Hz +# Sync Width 1.016 us 0.033 ms +# 20 chars 3 lines +# Front Porch 0.406 us 0.011 ms +# 8 chars 1 lines +# Back Porch 1.422 us 0.483 ms +# 28 chars 44 lines +# Active Time 8.127 us 11.235 ms +# 160 chars 1024 lines +# Blank Time 2.844 us 0.527 ms +# 56 chars 48 lines +# Polarity positive positive +# + mode "1280x1024-85" +# D: 157.50 MHz, H: 91.146 kHz, V: 85.02 Hz + geometry 1280 1024 1280 1024 32 + timings 6349 224 64 44 1 160 3 + hsync high vsync high endmode mode "1440x900-60" +# D: 106.500 MHz, H: 55.935 kHz, V: 60.00 Hz + geometry 1440 900 1440 900 32 + timings 9390 232 80 25 3 152 6 + hsync high vsync high endmode mode "1440x900-75" +# D: 136.750 MHz, H: 70.635 kHz, V: 75.00 Hz + geometry 1440 900 1440 900 32 + timings 7315 248 96 33 3 152 6 hsync high vsync high endmode +# +# 1440x1050, 60 Hz, Non-Interlaced (125.10 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1440 1050 +# Scan Frequency 65.220 kHz 60.00 Hz +# Sync Width 1.204 us 0.046 ms +# 19 chars 3 lines +# Front Porch 0.760 us 0.015 ms +# 12 chars 1 lines +# Back Porch 1.964 us 0.495 ms +# 31 chars 33 lines +# Active Time 11.405 us 16.099 ms +# 180 chars 1050 lines +# Blank Time 3.928 us 0.567 ms +# 62 chars 37 lines +# Polarity positive positive +# + mode "1440x1050-60" +# D: 125.10 MHz, H: 65.220 kHz, V: 60.00 Hz + geometry 1440 1050 1440 1050 32 + timings 7993 248 96 33 1 152 3 + hsync high vsync high endmode mode "1600x900-60" +# D: 118.250 MHz, H: 55.990 kHz, V: 60.00 Hz + geometry 1600 900 1600 900 32 + timings 8415 256 88 26 3 168 5 endmode mode "1600x1024-60" +# D: 136.358 MHz, H: 63.600 kHz, V: 60.00 Hz + geometry 1600 1024 1600 1024 32 timings 7315 272 104 32 1 168 3 endmode +# +# 1600x1200, 60 Hz, Non-Interlaced (156.00 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1600 1200 +# Scan Frequency 76.200 kHz 60.00 Hz +# Sync Width 1.026 us 0.105 ms +# 20 chars 8 lines +# Front Porch 0.205 us 0.131 ms +# 4 chars 10 lines +# Back Porch 1.636 us 0.682 ms +# 32 chars 52 lines +# Active Time 10.256 us 15.748 ms +# 200 chars 1200 lines +# Blank Time 2.872 us 0.866 ms +# 56 chars 66 lines +# Polarity negative negative +# + mode "1600x1200-60" +# D: 156.00 MHz, H: 76.200 kHz, V: 60.00 Hz + geometry 1600 1200 1600 1200 32 timings 6172 256 32 52 10 160 8 endmode +# +# 1600x1200, 75 Hz, Non-Interlaced (202.50 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1600 1200 +# Scan Frequency 93.750 kHz 75.00 Hz +# Sync Width 0.948 us 0.032 ms +# 24 chars 3 lines +# Front Porch 0.316 us 0.011 ms +# 8 chars 1 lines +# Back Porch 1.501 us 0.491 ms +# 38 chars 46 lines +# Active Time 7.901 us 12.800 ms +# 200 chars 1200 lines +# Blank Time 2.765 us 0.533 ms +# 70 chars 50 lines +# Polarity positive positive +# + mode "1600x1200-75" +# D: 202.50 MHz, H: 93.750 kHz, V: 75.00 Hz + geometry 1600 1200 1600 1200 32 + timings 4938 304 64 46 1 192 3 + hsync high vsync high endmode mode "1680x1050-60" +# D: 146.250 MHz, H: 65.290 kHz, V: 59.954 Hz + geometry 1680 1050 1680 1050 32 + timings 6814 280 104 30 3 176 6 + hsync high vsync high endmode mode "1680x1050-75" +# D: 187.000 MHz, H: 82.306 kHz, V: 74.892 Hz + geometry 1680 1050 1680 1050 32 + timings 5348 296 120 40 3 176 6 + hsync high vsync high endmode mode "1792x1344-60" +# D: 202.975 MHz, H: 83.460 kHz, V: 60.00 Hz + geometry 1792 1344 1792 1344 32 + timings 4902 320 128 43 1 192 3 + hsync high vsync high endmode mode "1856x1392-60" +# D: 218.571 MHz, H: 86.460 kHz, V: 60.00 Hz + geometry 1856 1392 1856 1392 32 + timings 4577 336 136 45 1 200 3 + hsync high vsync high endmode mode "1920x1200-60" +# D: 193.250 MHz, H: 74.556 kHz, V: 60.00 Hz + geometry 1920 1200 1920 1200 32 + timings 5173 336 136 36 3 200 6 + hsync high vsync high endmode mode "1920x1440-60" +# D: 234.000 MHz, H:90.000 kHz, V: 60.00 Hz + geometry 1920 1440 1920 1440 32 + timings 4274 344 128 56 1 208 3 + hsync high vsync high endmode mode "1920x1440-75" +# D: 297.000 MHz, H:112.500 kHz, V: 75.00 Hz + geometry 1920 1440 1920 1440 32 + timings 3367 352 144 56 1 224 3 + hsync high vsync high endmode mode "2048x1536-60" +# D: 267.250 MHz, H: 95.446 kHz, V: 60.00 Hz + geometry 2048 1536 2048 1536 32 + timings 3742 376 152 49 3 224 4 hsync high vsync high endmode +# +# 1280x720, 60 Hz, Non-Interlaced (74.481 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1280 720 +# Scan Frequency 44.760 kHz 60.00 Hz +# Sync Width 1.826 us 67.024 ms +# 17 chars 3 lines +# Front Porch 0.752 us 22.341 ms +# 7 chars 1 lines +# Back Porch 2.578 us 491.510 ms +# 24 chars 22 lines +# Active Time 17.186 us 16.086 ms +# 160 chars 720 lines +# Blank Time 5.156 us 0.581 ms +# 48 chars 26 lines +# Polarity negative negative +# + mode "1280x720-60" +# D: 74.481 MHz, H: 44.760 kHz, V: 60.00 Hz + geometry 1280 720 1280 720 32 timings 13426 192 64 22 1 136 3 endmode +# +# 1920x1080, 60 Hz, Non-Interlaced (172.798 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1920 1080 +# Scan Frequency 67.080 kHz 60.00 Hz +# Sync Width 1.204 us 44.723 ms +# 26 chars 3 lines +# Front Porch 0.694 us 14.908 ms +# 15 chars 1 lines +# Back Porch 1.898 us 506.857 ms +# 41 chars 34 lines +# Active Time 11.111 us 16.100 ms +# 240 chars 1080 lines +# Blank Time 3.796 us 0.566 ms +# 82 chars 38 lines +# Polarity negative negative +# + mode "1920x1080-60" +# D: 74.481 MHz, H: 67.080 kHz, V: 60.00 Hz + geometry 1920 1080 1920 1080 32 timings 5787 328 120 34 1 208 3 endmode +# +# 1400x1050, 60 Hz, Non-Interlaced (122.61 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1400 1050 +# Scan Frequency 65.218 kHz 59.99 Hz +# Sync Width 1.037 us 0.047 ms +# 19 chars 3 lines +# Front Porch 0.444 us 0.015 ms +# 11 chars 1 lines +# Back Porch 1.185 us 0.188 ms +# 30 chars 33 lines +# Active Time 12.963 us 16.411 ms +# 175 chars 1050 lines +# Blank Time 2.667 us 0.250 ms +# 60 chars 37 lines +# Polarity negative positive +# + mode "1400x1050-60" +# D: 122.750 MHz, H: 65.317 kHz, V: 59.99 Hz + geometry 1400 1050 1408 1050 32 + timings 8214 232 88 32 3 144 4 endmode mode "1400x1050-75" +# D: 156.000 MHz, H: 82.278 kHz, V: 74.867 Hz + geometry 1400 1050 1408 1050 32 timings 6410 248 104 42 3 144 4 endmode +# +# 1366x768, 60 Hz, Non-Interlaced (85.86 MHz dotclock) +# +# Horizontal Vertical +# Resolution 1366 768 +# Scan Frequency 47.700 kHz 60.00 Hz +# Sync Width 1.677 us 0.063 ms +# 18 chars 3 lines +# Front Porch 0.839 us 0.021 ms +# 9 chars 1 lines +# Back Porch 2.516 us 0.482 ms +# 27 chars 23 lines +# Active Time 15.933 us 16.101 ms +# 171 chars 768 lines +# Blank Time 5.031 us 0.566 ms +# 54 chars 27 lines +# Polarity negative positive +# + mode "1360x768-60" +# D: 84.750 MHz, H: 47.720 kHz, V: 60.00 Hz + geometry 1360 768 1360 768 32 + timings 11799 208 72 22 3 136 5 endmode mode "1366x768-60" +# D: 85.86 MHz, H: 47.700 kHz, V: 60.00 Hz + geometry 1366 768 1366 768 32 + timings 11647 216 72 23 1 144 3 endmode mode "1366x768-50" +# D: 69,924 MHz, H: 39.550 kHz, V: 50.00 Hz + geometry 1366 768 1366 768 32 timings 14301 200 56 19 1 144 3 endmode diff --git a/Documentation/fb/viafb.txt b/Documentation/fb/viafb.txt new file mode 100644 index 00000000000..67dbf442b0b --- /dev/null +++ b/Documentation/fb/viafb.txt @@ -0,0 +1,214 @@ + + VIA Integration Graphic Chip Console Framebuffer Driver + +[Platform] +----------------------- + The console framebuffer driver is for graphics chips of + VIA UniChrome Family(CLE266, PM800 / CN400 / CN300, + P4M800CE / P4M800Pro / CN700 / VN800, + CX700 / VX700, K8M890, P4M890, + CN896 / P4M900, VX800) + +[Driver features] +------------------------ + Device: CRT, LCD, DVI + + Support viafb_mode: + CRT: + 640x480(60, 75, 85, 100, 120 Hz), 720x480(60 Hz), + 720x576(60 Hz), 800x600(60, 75, 85, 100, 120 Hz), + 848x480(60 Hz), 856x480(60 Hz), 1024x512(60 Hz), + 1024x768(60, 75, 85, 100 Hz), 1152x864(75 Hz), + 1280x768(60 Hz), 1280x960(60 Hz), 1280x1024(60, 75, 85 Hz), + 1440x1050(60 Hz), 1600x1200(60, 75 Hz), 1280x720(60 Hz), + 1920x1080(60 Hz), 1400x1050(60 Hz), 800x480(60 Hz) + + color depth: 8 bpp, 16 bpp, 32 bpp supports. + + Support 2D hardware accelerator. + +[Using the viafb module] +-- -- -------------------- + Start viafb with default settings: + #modprobe viafb + + Start viafb with with user options: + #modprobe viafb viafb_mode=800x600 viafb_bpp=16 viafb_refresh=60 + viafb_active_dev=CRT+DVI viafb_dvi_port=DVP1 + viafb_mode1=1024x768 viafb_bpp=16 viafb_refresh1=60 + viafb_SAMM_ON=1 + + viafb_mode: + 640x480 (default) + 720x480 + 800x600 + 1024x768 + ...... + + viafb_bpp: + 8, 16, 32 (default:32) + + viafb_refresh: + 60, 75, 85, 100, 120 (default:60) + + viafb_lcd_dsp_method: + 0 : expansion (default) + 1 : centering + + viafb_lcd_mode: + 0 : LCD panel with LSB data format input (default) + 1 : LCD panel with MSB data format input + + viafb_lcd_panel_id: + 0 : Resolution: 640x480, Channel: single, Dithering: Enable + 1 : Resolution: 800x600, Channel: single, Dithering: Enable + 2 : Resolution: 1024x768, Channel: single, Dithering: Enable (default) + 3 : Resolution: 1280x768, Channel: single, Dithering: Enable + 4 : Resolution: 1280x1024, Channel: dual, Dithering: Enable + 5 : Resolution: 1400x1050, Channel: dual, Dithering: Enable + 6 : Resolution: 1600x1200, Channel: dual, Dithering: Enable + + 8 : Resolution: 800x480, Channel: single, Dithering: Enable + 9 : Resolution: 1024x768, Channel: dual, Dithering: Enable + 10: Resolution: 1024x768, Channel: single, Dithering: Disable + 11: Resolution: 1024x768, Channel: dual, Dithering: Disable + 12: Resolution: 1280x768, Channel: single, Dithering: Disable + 13: Resolution: 1280x1024, Channel: dual, Dithering: Disable + 14: Resolution: 1400x1050, Channel: dual, Dithering: Disable + 15: Resolution: 1600x1200, Channel: dual, Dithering: Disable + 16: Resolution: 1366x768, Channel: single, Dithering: Disable + 17: Resolution: 1024x600, Channel: single, Dithering: Enable + 18: Resolution: 1280x768, Channel: dual, Dithering: Enable + 19: Resolution: 1280x800, Channel: single, Dithering: Enable + + viafb_accel: + 0 : No 2D Hardware Acceleration + 1 : 2D Hardware Acceleration (default) + + viafb_SAMM_ON: + 0 : viafb_SAMM_ON disable (default) + 1 : viafb_SAMM_ON enable + + viafb_mode1: (secondary display device) + 640x480 (default) + 720x480 + 800x600 + 1024x768 + ... ... + + viafb_bpp1: (secondary display device) + 8, 16, 32 (default:32) + + viafb_refresh1: (secondary display device) + 60, 75, 85, 100, 120 (default:60) + + viafb_active_dev: + This option is used to specify active devices.(CRT, DVI, CRT+LCD...) + DVI stands for DVI or HDMI, E.g., If you want to enable HDMI, + set viafb_active_dev=DVI. In SAMM case, the previous of + viafb_active_dev is primary device, and the following is + secondary device. + + For example: + To enable one device, such as DVI only, we can use: + modprobe viafb viafb_active_dev=DVI + To enable two devices, such as CRT+DVI: + modprobe viafb viafb_active_dev=CRT+DVI; + + For DuoView case, we can use: + modprobe viafb viafb_active_dev=CRT+DVI + OR + modprobe viafb viafb_active_dev=DVI+CRT... + + For SAMM case: + If CRT is primary and DVI is secondary, we should use: + modprobe viafb viafb_active_dev=CRT+DVI viafb_SAMM_ON=1... + If DVI is primary and CRT is secondary, we should use: + modprobe viafb viafb_active_dev=DVI+CRT viafb_SAMM_ON=1... + + viafb_display_hardware_layout: + This option is used to specify display hardware layout for CX700 chip. + 1 : LCD only + 2 : DVI only + 3 : LCD+DVI (default) + 4 : LCD1+LCD2 (internal + internal) + 16: LCD1+ExternalLCD2 (internal + external) + + viafb_second_size: + This option is used to set second device memory size(MB) in SAMM case. + The minimal size is 16. + + viafb_platform_epia_dvi: + This option is used to enable DVI on EPIA - M + 0 : No DVI on EPIA - M (default) + 1 : DVI on EPIA - M + + viafb_bus_width: + When using 24 - Bit Bus Width Digital Interface, + this option should be set. + 12: 12-Bit LVDS or 12-Bit TMDS (default) + 24: 24-Bit LVDS or 24-Bit TMDS + + viafb_device_lcd_dualedge: + When using Dual Edge Panel, this option should be set. + 0 : No Dual Edge Panel (default) + 1 : Dual Edge Panel + + viafb_video_dev: + This option is used to specify video output devices(CRT, DVI, LCD) for + duoview case. + For example: + To output video on DVI, we should use: + modprobe viafb viafb_video_dev=DVI... + + viafb_lcd_port: + This option is used to specify LCD output port, + available values are "DVP0" "DVP1" "DFP_HIGHLOW" "DFP_HIGH" "DFP_LOW". + for external LCD + external DVI on CX700(External LCD is on DVP0), + we should use: + modprobe viafb viafb_lcd_port=DVP0... + +Notes: + 1. CRT may not display properly for DuoView CRT & DVI display at + the "640x480" PAL mode with DVI overscan enabled. + 2. SAMM stands for single adapter multi monitors. It is different from + multi-head since SAMM support multi monitor at driver layers, thus fbcon + layer doesn't even know about it; SAMM's second screen doesn't have a + device node file, thus a user mode application can't access it directly. + When SAMM is enabled, viafb_mode and viafb_mode1, viafb_bpp and + viafb_bpp1, viafb_refresh and viafb_refresh1 can be different. + 3. When console is depending on viafbinfo1, dynamically change resolution + and bpp, need to call VIAFB specified ioctl interface VIAFB_SET_DEVICE + instead of calling common ioctl function FBIOPUT_VSCREENINFO since + viafb doesn't support multi-head well, or it will cause screen crush. + 4. VX800 2D accelerator hasn't been supported in this driver yet. When + using driver on VX800, the driver will disable the acceleration + function as default. + + +[Configure viafb with "fbset" tool] +----------------------------------- + "fbset" is an inbox utility of Linux. + 1. Inquire current viafb information, type, + # fbset -i + + 2. Set various resolutions and viafb_refresh rates, + # fbset + + example, + # fbset "1024x768-75" + or + # fbset -g 1024 768 1024 768 32 + Check the file "/etc/fb.modes" to find display modes available. + + 3. Set the color depth, + # fbset -depth + + example, + # fbset -depth 16 + +[Bootup with viafb]: +-------------------- + Add the following line to your grub.conf: + append = "video=viafb:viafb_mode=1024x768,viafb_bpp=32,viafb_refresh=85" + -- cgit v1.2.3-70-g09d2 From 3f7a26b4b9768fe31597d1af35106aa512dc3742 Mon Sep 17 00:00:00 2001 From: Phil Endecott Date: Wed, 15 Oct 2008 22:03:35 -0700 Subject: intelfb: support 945GME (as used in ASUS Eee 901) Add support for Intel's 945GME graphics chip to the intelfb driver. I have assumed that the 945GME is identical to the already-supported 945GM apart from its PCI IDs; this is based on a quick look at the X driver for these chips which seems to treat them identically. The 945GME is used in the ASUS Eee 901, and I coded this in the hope that I'd be able to use it to get a console at the native 1024x600 resolution which is not known to the BIOS. I realised too late that the intelfb driver does not support mode changing on laptops, so it won't be any use for me. Signed-off-by: Phil Endecott Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/fb/intelfb.txt | 1 + drivers/video/intelfb/intelfb.h | 7 +++++-- drivers/video/intelfb/intelfb_i2c.c | 1 + drivers/video/intelfb/intelfbdrv.c | 7 ++++++- drivers/video/intelfb/intelfbhw.c | 7 +++++++ 5 files changed, 20 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/fb/intelfb.txt b/Documentation/fb/intelfb.txt index 27a3160650a..dd9e944ea62 100644 --- a/Documentation/fb/intelfb.txt +++ b/Documentation/fb/intelfb.txt @@ -14,6 +14,7 @@ graphics devices. These would include: Intel 915GM Intel 945G Intel 945GM + Intel 945GME Intel 965G Intel 965GM diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/intelfb/intelfb.h index 3325fbd68ab..a50bea61480 100644 --- a/drivers/video/intelfb/intelfb.h +++ b/drivers/video/intelfb/intelfb.h @@ -12,9 +12,9 @@ #endif /*** Version/name ***/ -#define INTELFB_VERSION "0.9.5" +#define INTELFB_VERSION "0.9.6" #define INTELFB_MODULE_NAME "intelfb" -#define SUPPORTED_CHIPSETS "830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM" +#define SUPPORTED_CHIPSETS "830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM" /*** Debug/feature defines ***/ @@ -58,6 +58,7 @@ #define PCI_DEVICE_ID_INTEL_915GM 0x2592 #define PCI_DEVICE_ID_INTEL_945G 0x2772 #define PCI_DEVICE_ID_INTEL_945GM 0x27A2 +#define PCI_DEVICE_ID_INTEL_945GME 0x27AE #define PCI_DEVICE_ID_INTEL_965G 0x29A2 #define PCI_DEVICE_ID_INTEL_965GM 0x2A02 @@ -160,6 +161,7 @@ enum intel_chips { INTEL_915GM, INTEL_945G, INTEL_945GM, + INTEL_945GME, INTEL_965G, INTEL_965GM, }; @@ -363,6 +365,7 @@ struct intelfb_info { ((dinfo)->chipset == INTEL_915GM) || \ ((dinfo)->chipset == INTEL_945G) || \ ((dinfo)->chipset == INTEL_945GM) || \ + ((dinfo)->chipset == INTEL_945GME) || \ ((dinfo)->chipset == INTEL_965G) || \ ((dinfo)->chipset == INTEL_965GM)) diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c index fcf9fadbf57..5d896b81f4e 100644 --- a/drivers/video/intelfb/intelfb_i2c.c +++ b/drivers/video/intelfb/intelfb_i2c.c @@ -171,6 +171,7 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo) /* has some LVDS + tv-out */ case INTEL_945G: case INTEL_945GM: + case INTEL_945GME: case INTEL_965G: case INTEL_965GM: /* SDVO ports have a single control bus - 2 devices */ diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index e44303f9bc5..a09e2364935 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -2,7 +2,7 @@ * intelfb * * Linux framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/ - * 945G/945GM/965G/965GM integrated graphics chips. + * 945G/945GM/945GME/965G/965GM integrated graphics chips. * * Copyright © 2002, 2003 David Dawes * 2004 Sylvain Meyer @@ -102,6 +102,9 @@ * * 04/2008 - Version 0.9.5 * Add support for 965G/965GM. (Maik Broemme ) + * + * 08/2008 - Version 0.9.6 + * Add support for 945GME. (Phil Endecott ) */ #include @@ -183,6 +186,7 @@ static struct pci_device_id intelfb_pci_table[] __devinitdata = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945GM }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945GME, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945GME }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965G }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965GM }, { 0, } @@ -555,6 +559,7 @@ static int __devinit intelfb_pci_register(struct pci_dev *pdev, (ent->device == PCI_DEVICE_ID_INTEL_915GM) || (ent->device == PCI_DEVICE_ID_INTEL_945G) || (ent->device == PCI_DEVICE_ID_INTEL_945GM) || + (ent->device == PCI_DEVICE_ID_INTEL_945GME) || (ent->device == PCI_DEVICE_ID_INTEL_965G) || (ent->device == PCI_DEVICE_ID_INTEL_965GM)) { diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/intelfb/intelfbhw.c index 8e6d6a4db0a..8b26b27c2db 100644 --- a/drivers/video/intelfb/intelfbhw.c +++ b/drivers/video/intelfb/intelfbhw.c @@ -143,6 +143,12 @@ int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo) dinfo->mobile = 1; dinfo->pll_index = PLLS_I9xx; return 0; + case PCI_DEVICE_ID_INTEL_945GME: + dinfo->name = "Intel(R) 945GME"; + dinfo->chipset = INTEL_945GME; + dinfo->mobile = 1; + dinfo->pll_index = PLLS_I9xx; + return 0; case PCI_DEVICE_ID_INTEL_965G: dinfo->name = "Intel(R) 965G"; dinfo->chipset = INTEL_965G; @@ -186,6 +192,7 @@ int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size, case PCI_DEVICE_ID_INTEL_915GM: case PCI_DEVICE_ID_INTEL_945G: case PCI_DEVICE_ID_INTEL_945GM: + case PCI_DEVICE_ID_INTEL_945GME: case PCI_DEVICE_ID_INTEL_965G: case PCI_DEVICE_ID_INTEL_965GM: /* 915, 945 and 965 chipsets support a 256MB aperture. -- cgit v1.2.3-70-g09d2 From c0dd504cea3703c3ec9bfd810e6bd649680afd37 Mon Sep 17 00:00:00 2001 From: Mike Pagano Date: Wed, 15 Oct 2008 22:03:46 -0700 Subject: uvesafb: document mode to mode_option parameter change Document the change from the old "mode" parameter to the "mode_option" parameter. Signed-off-by: Mike Pagano Cc: Krzysztof Halasa Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/fb/uvesafb.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/fb/uvesafb.txt b/Documentation/fb/uvesafb.txt index bcfc233a008..7ac3c4078ff 100644 --- a/Documentation/fb/uvesafb.txt +++ b/Documentation/fb/uvesafb.txt @@ -52,7 +52,7 @@ are either given on the kernel command line or as module parameters, e.g.: video=uvesafb:1024x768-32,mtrr:3,ywrap (compiled into the kernel) - # modprobe uvesafb mode=1024x768-32 mtrr=3 scroll=ywrap (module) + # modprobe uvesafb mode_option=1024x768-32 mtrr=3 scroll=ywrap (module) Accepted options: @@ -105,7 +105,7 @@ vtotal:n The mode you want to set, in the standard modedb format. Refer to modedb.txt for a detailed description. When uvesafb is compiled as a module, the mode string should be provided as a value of the - 'mode' option. + 'mode_option' option. vbemode:x Force the use of VBE mode x. The mode will only be set if it's -- cgit v1.2.3-70-g09d2 From 758222f84261a6a808c4d1dcd443f90c1baaa875 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 15 Oct 2008 22:04:14 -0700 Subject: docbook: update procfs credits Update Erik Mouw's email address & affiliation in DocBook. Signed-off-by: Randy Dunlap Acked-by: Erik Mouw Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/DocBook/procfs-guide.tmpl | 29 ++++++++++------------------- Documentation/DocBook/procfs_example.c | 20 ++++---------------- 2 files changed, 14 insertions(+), 35 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/procfs-guide.tmpl b/Documentation/DocBook/procfs-guide.tmpl index 8a5dc6e021f..9eba4b7af73 100644 --- a/Documentation/DocBook/procfs-guide.tmpl +++ b/Documentation/DocBook/procfs-guide.tmpl @@ -14,17 +14,20 @@ (J.A.K.) Mouw - Delft University of Technology - Faculty of Information Technology and Systems
- J.A.K.Mouw@its.tudelft.nl - PO BOX 5031 - 2600 GA - Delft - The Netherlands + mouw@nl.linux.org
+ + + This software and documentation were written while working on the + LART computing board + (http://www.lartmaker.nl/), + which was sponsored by the Delt University of Technology projects + Mobile Multi-media Communications and Ubiquitous Communications. + + @@ -108,18 +111,6 @@ proofreading. - - This documentation was written while working on the LART - computing board (http://www.lart.tudelft.nl/), - which is sponsored by the Mobile Multi-media Communications - (http://www.mmc.tudelft.nl/) - and Ubiquitous Communications (http://www.ubicom.tudelft.nl/) - projects. - - Erik diff --git a/Documentation/DocBook/procfs_example.c b/Documentation/DocBook/procfs_example.c index 2f3de0fb836..8c6396e4bf3 100644 --- a/Documentation/DocBook/procfs_example.c +++ b/Documentation/DocBook/procfs_example.c @@ -1,28 +1,16 @@ /* * procfs_example.c: an example proc interface * - * Copyright (C) 2001, Erik Mouw (J.A.K.Mouw@its.tudelft.nl) + * Copyright (C) 2001, Erik Mouw (mouw@nl.linux.org) * * This file accompanies the procfs-guide in the Linux kernel * source. Its main use is to demonstrate the concepts and * functions described in the guide. * * This software has been developed while working on the LART - * computing board (http://www.lart.tudelft.nl/), which is - * sponsored by the Mobile Multi-media Communications - * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications - * (http://www.ubicom.tudelft.nl/) projects. - * - * The author can be reached at: - * - * Erik Mouw - * Information and Communication Theory Group - * Faculty of Information Technology and Systems - * Delft University of Technology - * P.O. Box 5031 - * 2600 GA Delft - * The Netherlands - * + * computing board (http://www.lartmaker.nl), which was sponsored + * by the Delt University of Technology projects Mobile Multi-media + * Communications and Ubiquitous Communications. * * This program is free software; you can redistribute * it and/or modify it under the terms of the GNU General -- cgit v1.2.3-70-g09d2 From 6cd159744eaf212f3729d154f3881230a7c19eb2 Mon Sep 17 00:00:00 2001 From: David Fries Date: Wed, 15 Oct 2008 22:04:43 -0700 Subject: W1: feature, w1_therm.c use strong pullup and documentation Added strong pullup to thermal sensor driver and general documentation on the sensor. Signed-off-by: David Fries Signed-off-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/w1/00-INDEX | 2 ++ Documentation/w1/slaves/00-INDEX | 4 ++++ Documentation/w1/slaves/w1_therm | 41 ++++++++++++++++++++++++++++++++++++++++ drivers/w1/slaves/w1_therm.c | 15 +++++++++++++-- 4 files changed, 60 insertions(+), 2 deletions(-) create mode 100644 Documentation/w1/slaves/00-INDEX create mode 100644 Documentation/w1/slaves/w1_therm (limited to 'Documentation') diff --git a/Documentation/w1/00-INDEX b/Documentation/w1/00-INDEX index 5270cf4cb10..cb49802745d 100644 --- a/Documentation/w1/00-INDEX +++ b/Documentation/w1/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - This file +slaves/ + - Drivers that provide support for specific family codes. masters/ - Individual chips providing 1-wire busses. w1.generic diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX new file mode 100644 index 00000000000..f8101d6b07b --- /dev/null +++ b/Documentation/w1/slaves/00-INDEX @@ -0,0 +1,4 @@ +00-INDEX + - This file +w1_therm + - The Maxim/Dallas Semiconductor ds18*20 temperature sensor. diff --git a/Documentation/w1/slaves/w1_therm b/Documentation/w1/slaves/w1_therm new file mode 100644 index 00000000000..0403aaaba87 --- /dev/null +++ b/Documentation/w1/slaves/w1_therm @@ -0,0 +1,41 @@ +Kernel driver w1_therm +==================== + +Supported chips: + * Maxim ds18*20 based temperature sensors. + +Author: Evgeniy Polyakov + + +Description +----------- + +w1_therm provides basic temperature conversion for ds18*20 devices. +supported family codes: +W1_THERM_DS18S20 0x10 +W1_THERM_DS1822 0x22 +W1_THERM_DS18B20 0x28 + +Support is provided through the sysfs w1_slave file. Each open and +read sequence will initiate a temperature conversion then provide two +lines of ASCII output. The first line contains the nine hex bytes +read along with a calculated crc value and YES or NO if it matched. +If the crc matched the returned values are retained. The second line +displays the retained values along with a temperature in millidegrees +Centigrade after t=. + +Parasite powered devices are limited to one slave performing a +temperature conversion at a time. If none of the devices are parasite +powered it would be possible to convert all the devices at the same +time and then go back to read individual sensors. That isn't +currently supported. The driver also doesn't support reduced +precision (which would also reduce the conversion time). + +The module parameter strong_pullup can be set to 0 to disable the +strong pullup or 1 to enable. If enabled the 5V strong pullup will be +enabled when the conversion is taking place provided the master driver +must support the strong pullup (or it falls back to a pullup +resistor). The DS18b20 temperature sensor specification lists a +maximum current draw of 1.5mA and that a 5k pullup resistor is not +sufficient. The strong pullup is designed to provide the additional +current required. diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index fb28acaeed6..e87f464a6fb 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -37,6 +37,14 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, temperature family."); +/* Allow the strong pullup to be disabled, but default to enabled. + * If it was disabled a parasite powered device might not get the require + * current to do a temperature conversion. If it is enabled parasite powered + * devices have a better chance of getting the current required. + */ +static int w1_strong_pullup = 1; +module_param_named(strong_pullup, w1_strong_pullup, int, 0); + static u8 bad_roms[][9] = { {0xaa, 0x00, 0x4b, 0x46, 0xff, 0xff, 0x0c, 0x10, 0x87}, {} @@ -192,9 +200,12 @@ static ssize_t w1_therm_read_bin(struct kobject *kobj, int count = 0; unsigned int tm = 750; + /* 750ms strong pullup (or delay) after the convert */ + if (w1_strong_pullup) + w1_next_pullup(dev, tm); w1_write_8(dev, W1_CONVERT_TEMP); - - msleep(tm); + if (!w1_strong_pullup) + msleep(tm); if (!w1_reset_select_slave(sl)) { -- cgit v1.2.3-70-g09d2 From eba3b06da4bd8b79fe6c8ed922a319362c1a40c0 Mon Sep 17 00:00:00 2001 From: David Fries Date: Wed, 15 Oct 2008 22:04:47 -0700 Subject: W1: Document add, remove, search_count, and pullup. Document w1_master_add, w1_master_remove, search_count, and pullup. Signed-off-by: David Fries Signed-off-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/w1/w1.generic | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic index 4c6509dd478..e3333eec432 100644 --- a/Documentation/w1/w1.generic +++ b/Documentation/w1/w1.generic @@ -79,10 +79,13 @@ w1 master sysfs interface - a directory for a found device. The format is family-serial bus - (standard) symlink to the w1 bus driver - (standard) symlink to the w1 driver +w1_master_add - Manually register a slave device w1_master_attempts - the number of times a search was attempted w1_master_max_slave_count - the maximum slaves that may be attached to a master w1_master_name - the name of the device (w1_bus_masterX) +w1_master_pullup - 5V strong pullup 0 enabled, 1 disabled +w1_master_remove - Manually remove a slave device w1_master_search - the number of searches left to do, -1=continual (default) w1_master_slave_count - the number of slaves found @@ -90,7 +93,13 @@ w1_master_slaves - the names of the slaves, one per line w1_master_timeout - the delay in seconds between searches If you have a w1 bus that never changes (you don't add or remove devices), -you can set w1_master_search to a positive value to disable searches. +you can set the module parameter search_count to a small positive number +for an initially small number of bus searches. Alternatively it could be +set to zero, then manually add the slave device serial numbers by +w1_master_add device file. The w1_master_add and w1_master_remove files +generally only make sense when searching is disabled, as a search will +redetect manually removed devices that are present and timeout manually +added devices that aren't on the bus. w1 slave sysfs interface -- cgit v1.2.3-70-g09d2 From 3823ee44cfa8b0e6edbc0c21b81b49b95a27ca0d Mon Sep 17 00:00:00 2001 From: David Fries Date: Wed, 15 Oct 2008 22:05:09 -0700 Subject: W1: Documentation/w1/masters/ds2490 update Provide some additional details about the status of the driver and the ds2490 hardware. Signed-off-by: David Fries Signed-off-by: Evgeniy Polyakov Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/w1/masters/ds2490 | 52 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'Documentation') diff --git a/Documentation/w1/masters/ds2490 b/Documentation/w1/masters/ds2490 index 239f9ae0184..28176def3d6 100644 --- a/Documentation/w1/masters/ds2490 +++ b/Documentation/w1/masters/ds2490 @@ -16,3 +16,55 @@ which allows to build USB <-> W1 bridges. DS9490(R) is a USB <-> W1 bus master device which has 0x81 family ID integrated chip and DS2490 low-level operational chip. + +Notes and limitations. +- The weak pullup current is a minimum of 0.9mA and maximum of 6.0mA. +- The 5V strong pullup is supported with a minimum of 5.9mA and a + maximum of 30.4 mA. (From DS2490.pdf) +- While the ds2490 supports a hardware search the code doesn't take + advantage of it (in tested case it only returned first device). +- The hardware will detect when devices are attached to the bus on the + next bus (reset?) operation, however only a message is printed as + the core w1 code doesn't make use of the information. Connecting + one device tends to give multiple new device notifications. +- The number of USB bus transactions could be reduced if w1_reset_send + was added to the API. The name is just a suggestion. It would take + a write buffer and a read buffer (along with sizes) as arguments. + The ds2490 block I/O command supports reset, write buffer, read + buffer, and strong pullup all in one command, instead of the current + 1 reset bus, 2 write the match rom command and slave rom id, 3 block + write and read data. The write buffer needs to have the match rom + command and slave rom id prepended to the front of the requested + write buffer, both of which are known to the driver. +- The hardware supports normal, flexible, and overdrive bus + communication speeds, but only the normal is supported. +- The registered w1_bus_master functions don't define error + conditions. If a bus search is in progress and the ds2490 is + removed it can produce a good amount of error output before the bus + search finishes. +- The hardware supports detecting some error conditions, such as + short, alarming presence on reset, and no presence on reset, but the + driver doesn't query those values. +- The ds2490 specification doesn't cover short bulk in reads in + detail, but my observation is if fewer bytes are requested than are + available, the bulk read will return an error and the hardware will + clear the entire bulk in buffer. It would be possible to read the + maximum buffer size to not run into this error condition, only extra + bytes in the buffer is a logic error in the driver. The code should + should match reads and writes as well as data sizes. Reads and + writes are serialized and the status verifies that the chip is idle + (and data is available) before the read is executed, so it should + not happen. +- Running x86_64 2.6.24 UHCI under qemu 0.9.0 under x86_64 2.6.22-rc6 + with a OHCI controller, ds2490 running in the guest would operate + normally the first time the module was loaded after qemu attached + the ds2490 hardware, but if the module was unloaded, then reloaded + most of the time one of the bulk out or in, and usually the bulk in + would fail. qemu sets a 50ms timeout and the bulk in would timeout + even when the status shows data available. A bulk out write would + show a successful completion, but the ds2490 status register would + show 0 bytes written. Detaching qemu from the ds2490 hardware and + reattaching would clear the problem. usbmon output in the guest and + host did not explain the problem. My guess is a bug in either qemu + or the host OS and more likely the host OS. +-- 03-06-2008 David Fries -- cgit v1.2.3-70-g09d2 From 656e6c0050fd63ce42c55a6cb454a9b4b2f9ccf7 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Tue, 7 Oct 2008 13:21:56 +0200 Subject: Document panic_on_unrecovered_nmi sysctl This adds "panic_on_unrecovered_nmi" sysctl to Documentation/filesystems/proc.txt. The text is mainly taken from http://readlist.com/lists/vger.kernel.org/linux-kernel/43/217998.html. Signed-off-by: Bernhard Walle Signed-off-by: Jonathan Corbet --- Documentation/filesystems/proc.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index f566ad9bcb7..d2f77d95956 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1322,6 +1322,18 @@ debugging information is displayed on console. NMI switch that most IA32 servers have fires unknown NMI up, for example. If a system hangs up, try pressing the NMI switch. +panic_on_unrecovered_nmi +------------------------ + +The default Linux behaviour on an NMI of either memory or unknown is to continue +operation. For many environments such as scientific computing it is preferable +that the box is taken out and the error dealt with than an uncorrected +parity/ECC error get propogated. + +A small number of systems do generate NMI's for bizarre random reasons such as +power management so the default is off. That sysctl works like the existing +panic controls already in that directory. + nmi_watchdog ------------ -- cgit v1.2.3-70-g09d2 From 22359f5745eb26bd3205a1ede7968c8944398220 Mon Sep 17 00:00:00 2001 From: Diego Calleja Date: Fri, 17 Oct 2008 09:15:14 -0400 Subject: ext4: Update Documentation/filesystems/ext4.txt Since Ext4 is supposed to be stable in 2.6.28-rc, ext4's documentation file should be updated. [ More updates also added by Theodore Ts'o. ] Signed-off-by: Diego Calleja Signed-off-by: "Theodore Ts'o" --- Documentation/filesystems/ext4.txt | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index eb154ef36c2..174eaff7ded 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -2,19 +2,24 @@ Ext4 Filesystem =============== -This is a development version of the ext4 filesystem, an advanced level -of the ext3 filesystem which incorporates scalability and reliability -enhancements for supporting large filesystems (64 bit) in keeping with -increasing disk capacities and state-of-the-art feature requirements. +Ext4 is an an advanced level of the ext3 filesystem which incorporates +scalability and reliability enhancements for supporting large filesystems +(64 bit) in keeping with increasing disk capacities and state-of-the-art +feature requirements. -Mailing list: linux-ext4@vger.kernel.org +Mailing list: linux-ext4@vger.kernel.org +Web site: http://ext4.wiki.kernel.org 1. Quick usage instructions: =========================== +Note: More extensive information for getting started with ext4 can be + found at the ext4 wiki site at the URL: + http://ext4.wiki.kernel.org/index.php/Ext4_Howto + - Compile and install the latest version of e2fsprogs (as of this - writing version 1.41) from: + writing version 1.41.3) from: http://sourceforge.net/project/showfiles.php?group_id=2406 @@ -36,11 +41,9 @@ Mailing list: linux-ext4@vger.kernel.org # mke2fs -t ext4 /dev/hda1 - Or configure an existing ext3 filesystem to support extents and set - the test_fs flag to indicate that it's ok for an in-development - filesystem to touch this filesystem: + Or to configure an existing ext3 filesystem to support extents: - # tune2fs -O extents -E test_fs /dev/hda1 + # tune2fs -O extents /dev/hda1 If the filesystem was created with 128 byte inodes, it can be converted to use 256 byte for greater efficiency via: @@ -104,8 +107,8 @@ exist yet so I'm not sure they're in the near-term roadmap. The big performance win will come with mballoc, delalloc and flex_bg grouping of bitmaps and inode tables. Some test results available here: - - http://www.bullopensource.org/ext4/20080530/ffsb-write-2.6.26-rc2.html - - http://www.bullopensource.org/ext4/20080530/ffsb-readwrite-2.6.26-rc2.html + - http://www.bullopensource.org/ext4/20080818-ffsb/ffsb-write-2.6.27-rc1.html + - http://www.bullopensource.org/ext4/20080818-ffsb/ffsb-readwrite-2.6.27-rc1.html 3. Options ========== @@ -214,9 +217,6 @@ noreservation bsddf (*) Make 'df' act like BSD. minixdf Make 'df' act like Minix. -check=none Don't do extra checking of bitmaps on mount. -nocheck - debug Extra debugging information is sent to syslog. errors=remount-ro(*) Remount the filesystem read-only on an error. @@ -253,8 +253,6 @@ nobh (a) cache disk block mapping information "nobh" option tries to avoid associating buffer heads (supported only for "writeback" mode). -mballoc (*) Use the multiple block allocator for block allocation -nomballoc disabled multiple block allocator for block allocation. stripe=n Number of filesystem blocks that mballoc will try to use for allocation size and alignment. For RAID5/6 systems this should be the number of data -- cgit v1.2.3-70-g09d2 From f65e17086fc141bee1592bbf6e709e9c7a43541b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 17 Oct 2008 17:51:09 +0200 Subject: hwmon: (lm90) Support the extra resolution bits of MAX6657 The Maxim MAX6657, MAX6658 and MAX6659 have extra resolution bits for the local temperature measurement. Let the lm90 driver read them and export them to user-space. Signed-off-by: Jean Delvare Acked-by: Martyn Welch --- Documentation/hwmon/lm90 | 10 +++++---- drivers/hwmon/lm90.c | 54 +++++++++++++++++++++++++++++------------------- 2 files changed, 39 insertions(+), 25 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index aa4a0ec2008..0b3e8bb7c1f 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -86,9 +86,8 @@ family is that it features critical limits with hysteresis, and an increased resolution of the remote temperature measurement. The different chipsets of the family are not strictly identical, although -very similar. This driver doesn't handle any specific feature for now, -with the exception of SMBus PEC. For reference, here comes a non-exhaustive -list of specific features: +very similar. For reference, here comes a non-exhaustive list of specific +features: LM90: * Filter and alert configuration register at 0xBF. @@ -114,9 +113,11 @@ ADT7461: * Lower resolution for remote temperature MAX6657 and MAX6658: + * Better local resolution * Remote sensor type selection MAX6659: + * Better local resolution * Selectable address * Second critical temperature limit * Remote sensor type selection @@ -127,7 +128,8 @@ MAX6680 and MAX6681: All temperature values are given in degrees Celsius. Resolution is 1.0 degree for the local temperature, 0.125 degree for the remote -temperature. +temperature, except for the MAX6657, MAX6658 and MAX6659 which have a +resolution of 0.125 degree for both temperatures. Each sensor has its own high and low limits, plus a critical limit. Additionally, there is a relative hysteresis value common to both critical diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 73a1c622fb7..16b99e0bdff 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -149,6 +149,10 @@ I2C_CLIENT_INSMOD_7(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680); #define LM90_REG_R_TCRIT_HYST 0x21 #define LM90_REG_W_TCRIT_HYST 0x21 +/* MAX6657-specific registers */ + +#define MAX6657_REG_R_LOCAL_TEMPL 0x11 + /* * Conversions and various macros * For local temperatures and limits, critical limits and the hysteresis @@ -239,15 +243,15 @@ struct lm90_data { int kind; /* registers values */ - s8 temp8[5]; /* 0: local input - 1: local low limit - 2: local high limit - 3: local critical limit - 4: remote critical limit */ - s16 temp11[4]; /* 0: remote input + s8 temp8[4]; /* 0: local low limit + 1: local high limit + 2: local critical limit + 3: remote critical limit */ + s16 temp11[5]; /* 0: remote input 1: remote low limit 2: remote high limit - 3: remote offset (except max6657) */ + 3: remote offset (except max6657) + 4: local input */ u8 temp_hyst; u8 alarms; /* bitvector */ }; @@ -285,7 +289,7 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, data->temp8[nr] = TEMP1_TO_REG_ADT7461(val); else data->temp8[nr] = TEMP1_TO_REG(val); - i2c_smbus_write_byte_data(client, reg[nr - 1], data->temp8[nr]); + i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]); mutex_unlock(&data->update_lock); return count; } @@ -347,7 +351,7 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, long hyst; mutex_lock(&data->update_lock); - hyst = TEMP1_FROM_REG(data->temp8[3]) - val; + hyst = TEMP1_FROM_REG(data->temp8[2]) - val; i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST, HYST_TO_REG(hyst)); mutex_unlock(&data->update_lock); @@ -371,23 +375,23 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); } -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp11, NULL, 4); static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 1); + set_temp8, 0); static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, set_temp11, 1); static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 2); + set_temp8, 1); static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, set_temp11, 2); static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 3); + set_temp8, 2); static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 4); + set_temp8, 3); static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst, - set_temphyst, 3); -static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4); + set_temphyst, 2); +static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 3); static SENSOR_DEVICE_ATTR(temp2_offset, S_IWUSR | S_IRUGO, show_temp11, set_temp11, 3); @@ -779,13 +783,21 @@ static struct lm90_data *lm90_update_device(struct device *dev) u8 h, l; dev_dbg(&client->dev, "Updating lm90 data.\n"); - lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP, &data->temp8[0]); - lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[1]); - lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[2]); - lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[3]); - lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[4]); + lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[0]); + lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[1]); + lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[2]); + lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[3]); lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst); + if (data->kind == max6657) { + lm90_read16(client, LM90_REG_R_LOCAL_TEMP, + MAX6657_REG_R_LOCAL_TEMPL, + &data->temp11[4]); + } else { + if (lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP, + &h) == 0) + data->temp11[4] = h << 8; + } lm90_read16(client, LM90_REG_R_REMOTE_TEMPH, LM90_REG_R_REMOTE_TEMPL, &data->temp11[0]); -- cgit v1.2.3-70-g09d2 From a874a10cf0b7105ae5eeb98b4860eae0fc78fcdd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 17 Oct 2008 17:51:10 +0200 Subject: hwmon: (lm90) Update datasheet links Update the links to the datasheet of some of the devices supported by the lm90 driver. Also remove the links from the driver itself, so that we don't have to update them twice each time they change. Signed-off-by: Jean Delvare Acked-by: Martyn Welch --- Documentation/hwmon/lm90 | 12 ++++++------ drivers/hwmon/lm90.c | 30 +++++++----------------------- 2 files changed, 13 insertions(+), 29 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 0b3e8bb7c1f..0c08c5c5637 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -11,7 +11,7 @@ Supported chips: Prefix: 'lm99' Addresses scanned: I2C 0x4c and 0x4d Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/pf/LM/LM89.html + http://www.national.com/mpf/LM/LM89.html * National Semiconductor LM99 Prefix: 'lm99' Addresses scanned: I2C 0x4c and 0x4d @@ -21,17 +21,17 @@ Supported chips: Prefix: 'lm86' Addresses scanned: I2C 0x4c Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/pf/LM/LM86.html + http://www.national.com/mpf/LM/LM86.html * Analog Devices ADM1032 Prefix: 'adm1032' Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the Analog Devices website - http://www.analog.com/en/prod/0,2877,ADM1032,00.html + Datasheet: Publicly available at the ON Semiconductor website + http://www.onsemi.com/PowerSolutions/product.do?id=ADM1032 * Analog Devices ADT7461 Prefix: 'adt7461' Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the Analog Devices website - http://www.analog.com/en/prod/0,2877,ADT7461,00.html + Datasheet: Publicly available at the ON Semiconductor website + http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461 Note: Only if in ADM1032 compatibility mode * Maxim MAX6657 Prefix: 'max6657' diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 90489b8f5c8..d96e403d59e 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -6,9 +6,7 @@ * Based on the lm83 driver. The LM90 is a sensor chip made by National * Semiconductor. It reports up to two temperatures (its own plus up to * one external one) with a 0.125 deg resolution (1 deg for local - * temperature) and a 3-4 deg accuracy. Complete datasheet can be - * obtained from National's website at: - * http://www.national.com/pf/LM/LM90.html + * temperature) and a 3-4 deg accuracy. * * This driver also supports the LM89 and LM99, two other sensor chips * made by National Semiconductor. Both have an increased remote @@ -16,29 +14,19 @@ * additionally shifts remote temperatures (measured and limits) by 16 * degrees, which allows for higher temperatures measurement. The * driver doesn't handle it since it can be done easily in user-space. - * Complete datasheets can be obtained from National's website at: - * http://www.national.com/pf/LM/LM89.html - * http://www.national.com/pf/LM/LM99.html * Note that there is no way to differentiate between both chips. * * This driver also supports the LM86, another sensor chip made by * National Semiconductor. It is exactly similar to the LM90 except it * has a higher accuracy. - * Complete datasheet can be obtained from National's website at: - * http://www.national.com/pf/LM/LM86.html * * This driver also supports the ADM1032, a sensor chip made by Analog * Devices. That chip is similar to the LM90, with a few differences - * that are not handled by this driver. Complete datasheet can be - * obtained from Analog's website at: - * http://www.analog.com/en/prod/0,2877,ADM1032,00.html - * Among others, it has a higher accuracy than the LM90, much like the - * LM86 does. + * that are not handled by this driver. Among others, it has a higher + * accuracy than the LM90, much like the LM86 does. * * This driver also supports the MAX6657, MAX6658 and MAX6659 sensor - * chips made by Maxim. These chips are similar to the LM86. Complete - * datasheet can be obtained at Maxim's website at: - * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + * chips made by Maxim. These chips are similar to the LM86. * Note that there is no easy way to differentiate between the three * variants. The extra address and features of the MAX6659 are not * supported by this driver. These chips lack the remote temperature @@ -46,18 +34,14 @@ * * This driver also supports the MAX6680 and MAX6681, two other sensor * chips made by Maxim. These are quite similar to the other Maxim - * chips. Complete datasheet can be obtained at: - * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 - * The MAX6680 and MAX6681 only differ in the pinout so they can be - * treated identically. + * chips. The MAX6680 and MAX6681 only differ in the pinout so they can + * be treated identically. * * This driver also supports the ADT7461 chip from Analog Devices but * only in its "compatability mode". If an ADT7461 chip is found but * is configured in non-compatible mode (where its temperature * register values are decoded differently) it is ignored by this - * driver. Complete datasheet can be obtained from Analog's website - * at: - * http://www.analog.com/en/prod/0,2877,ADT7461,00.html + * driver. * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and -- cgit v1.2.3-70-g09d2 From 23b2d4778ad33ee6bfe60439fb73c16580f204f2 Mon Sep 17 00:00:00 2001 From: Nate Case Date: Fri, 17 Oct 2008 17:51:10 +0200 Subject: hwmon: (lm90) Support ADT7461 in extended mode Support ADT7461 in extended temperature range mode, which will change the range of readings from 0..127 to -64..191 degC. Adjust the register conversion functions accordingly. Signed-off-by: Nate Case Signed-off-by: Jean Delvare Tested-by: Martyn Welch --- Documentation/hwmon/lm90 | 8 +--- drivers/hwmon/Kconfig | 7 +-- drivers/hwmon/lm90.c | 120 ++++++++++++++++++++++++++++++++++++----------- 3 files changed, 97 insertions(+), 38 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 0c08c5c5637..53cd829f3f4 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -32,7 +32,6 @@ Supported chips: Addresses scanned: I2C 0x4c and 0x4d Datasheet: Publicly available at the ON Semiconductor website http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461 - Note: Only if in ADM1032 compatibility mode * Maxim MAX6657 Prefix: 'max6657' Addresses scanned: I2C 0x4c @@ -70,16 +69,13 @@ Description The LM90 is a digital temperature sensor. It senses its own temperature as well as the temperature of up to one external diode. It is compatible -with many other devices such as the LM86, the LM89, the LM99, the ADM1032, -the MAX6657, MAX6658, MAX6659, MAX6680 and the MAX6681 all of which are -supported by this driver. +with many other devices, many of which are supported by this driver. Note that there is no easy way to differentiate between the MAX6657, MAX6658 and MAX6659 variants. The extra address and features of the MAX6659 are not supported by this driver. The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously can't (and don't need to) -be distinguished. Additionally, the ADT7461 is supported if found in -ADM1032 compatibility mode. +be distinguished. The specificity of this family of chipsets over the ADM1021/LM84 family is that it features critical limits with hysteresis, and an diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index ebacc0af40f..96701e099e8 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -510,11 +510,8 @@ config SENSORS_LM90 depends on I2C help If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657, - MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips. - - The Analog Devices ADT7461 sensor chip is also supported, but only - if found in ADM1032 compatibility mode. + LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim + MAX6657, MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips. This driver can also be built as a module. If so, the module will be called lm90. diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index b2d9b3f0946..fe5d860fc83 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -37,11 +37,10 @@ * chips. The MAX6680 and MAX6681 only differ in the pinout so they can * be treated identically. * - * This driver also supports the ADT7461 chip from Analog Devices but - * only in its "compatability mode". If an ADT7461 chip is found but - * is configured in non-compatible mode (where its temperature - * register values are decoded differently) it is ignored by this - * driver. + * This driver also supports the ADT7461 chip from Analog Devices. + * It's supported in both compatibility and extended mode. It is mostly + * compatible with LM90 except for a data format difference for the + * temperature value registers. * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and @@ -137,6 +136,11 @@ I2C_CLIENT_INSMOD_7(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680); #define MAX6657_REG_R_LOCAL_TEMPL 0x11 +/* + * Device flags + */ +#define LM90_FLAG_ADT7461_EXT 0x01 /* ADT7461 extended mode */ + /* * Functions declaration */ @@ -191,6 +195,7 @@ struct lm90_data { char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ int kind; + int flags; /* registers values */ s8 temp8[4]; /* 0: local low limit @@ -256,26 +261,61 @@ static u8 hyst_to_reg(long val) } /* - * ADT7461 is almost identical to LM90 except that attempts to write - * values that are outside the range 0 < temp < 127 are treated as - * the boundary value. + * ADT7461 in compatibility mode is almost identical to LM90 except that + * attempts to write values that are outside the range 0 < temp < 127 are + * treated as the boundary value. + * + * ADT7461 in "extended mode" operation uses unsigned integers offset by + * 64 (e.g., 0 -> -64 degC). The range is restricted to -64..191 degC. */ -static u8 temp1_to_reg_adt7461(long val) +static inline int temp1_from_reg_adt7461(struct lm90_data *data, u8 val) { - if (val <= 0) - return 0; - if (val >= 127000) - return 127; - return (val + 500) / 1000; + if (data->flags & LM90_FLAG_ADT7461_EXT) + return (val - 64) * 1000; + else + return temp1_from_reg(val); } -static u16 temp2_to_reg_adt7461(long val) +static inline int temp2_from_reg_adt7461(struct lm90_data *data, u16 val) { - if (val <= 0) - return 0; - if (val >= 127750) - return 0x7FC0; - return (val + 125) / 250 * 64; + if (data->flags & LM90_FLAG_ADT7461_EXT) + return (val - 0x4000) / 64 * 250; + else + return temp2_from_reg(val); +} + +static u8 temp1_to_reg_adt7461(struct lm90_data *data, long val) +{ + if (data->flags & LM90_FLAG_ADT7461_EXT) { + if (val <= -64000) + return 0; + if (val >= 191000) + return 0xFF; + return (val + 500 + 64000) / 1000; + } else { + if (val <= 0) + return 0; + if (val >= 127000) + return 127; + return (val + 500) / 1000; + } +} + +static u16 temp2_to_reg_adt7461(struct lm90_data *data, long val) +{ + if (data->flags & LM90_FLAG_ADT7461_EXT) { + if (val <= -64000) + return 0; + if (val >= 191750) + return 0xFFC0; + return (val + 64000 + 125) / 250 * 64; + } else { + if (val <= 0) + return 0; + if (val >= 127750) + return 0x7FC0; + return (val + 125) / 250 * 64; + } } /* @@ -287,7 +327,14 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", temp1_from_reg(data->temp8[attr->index])); + int temp; + + if (data->kind == adt7461) + temp = temp1_from_reg_adt7461(data, data->temp8[attr->index]); + else + temp = temp1_from_reg(data->temp8[attr->index]); + + return sprintf(buf, "%d\n", temp); } static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, @@ -308,7 +355,7 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, mutex_lock(&data->update_lock); if (data->kind == adt7461) - data->temp8[nr] = temp1_to_reg_adt7461(val); + data->temp8[nr] = temp1_to_reg_adt7461(data, val); else data->temp8[nr] = temp1_to_reg(val); i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]); @@ -321,7 +368,14 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", temp2_from_reg(data->temp11[attr->index])); + int temp; + + if (data->kind == adt7461) + temp = temp2_from_reg_adt7461(data, data->temp11[attr->index]); + else + temp = temp2_from_reg(data->temp11[attr->index]); + + return sprintf(buf, "%d\n", temp); } static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, @@ -344,7 +398,7 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, mutex_lock(&data->update_lock); if (data->kind == adt7461) - data->temp11[nr] = temp2_to_reg_adt7461(val); + data->temp11[nr] = temp2_to_reg_adt7461(data, val); else if (data->kind == max6657 || data->kind == max6680) data->temp11[nr] = temp1_to_reg(val) << 8; else @@ -364,8 +418,14 @@ static ssize_t show_temphyst(struct device *dev, struct device_attribute *devatt { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", temp1_from_reg(data->temp8[attr->index]) - - temp1_from_reg(data->temp_hyst)); + int temp; + + if (data->kind == adt7461) + temp = temp1_from_reg_adt7461(data, data->temp8[attr->index]); + else + temp = temp1_from_reg(data->temp8[attr->index]); + + return sprintf(buf, "%d\n", temp - temp1_from_reg(data->temp_hyst)); } static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, @@ -598,7 +658,7 @@ static int lm90_detect(struct i2c_client *new_client, int kind, kind = adm1032; } else if (chip_id == 0x51 /* ADT7461 */ - && (reg_config1 & 0x1F) == 0x00 /* check compat mode */ + && (reg_config1 & 0x1B) == 0x00 && reg_convrate <= 0x0A) { kind = adt7461; } @@ -737,6 +797,12 @@ static void lm90_init_client(struct i2c_client *client) } config_orig = config; + /* Check Temperature Range Select */ + if (data->kind == adt7461) { + if (config & 0x04) + data->flags |= LM90_FLAG_ADT7461_EXT; + } + /* * Put MAX6680/MAX8881 into extended resolution (bit 0x10, * 0.125 degree resolution) and range (0x08, extend range -- cgit v1.2.3-70-g09d2 From 271dabf5bbf6ae6e2792cd5cf6f0434230e5c18c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 17 Oct 2008 17:51:11 +0200 Subject: hwmon: (lm90) Support MAX6646, MAX6647 and MAX6649 These Maxim chips are similar to MAX6657 but use unsigned temperature values to allow for readings up to 145 degrees. Signed-off-by: Ben Hutchings Signed-off-by: Jean Delvare --- Documentation/hwmon/lm90 | 15 ++++++++++ drivers/hwmon/Kconfig | 3 +- drivers/hwmon/lm90.c | 77 ++++++++++++++++++++++++++++++++++++++++-------- 3 files changed, 82 insertions(+), 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 53cd829f3f4..e0d5206d1de 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -32,6 +32,21 @@ Supported chips: Addresses scanned: I2C 0x4c and 0x4d Datasheet: Publicly available at the ON Semiconductor website http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461 + * Maxim MAX6646 + Prefix: 'max6646' + Addresses scanned: I2C 0x4d + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + * Maxim MAX6647 + Prefix: 'max6646' + Addresses scanned: I2C 0x4e + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + * Maxim MAX6649 + Prefix: 'max6646' + Addresses scanned: I2C 0x4c + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 * Maxim MAX6657 Prefix: 'max6657' Addresses scanned: I2C 0x4c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 96701e099e8..6de1e0ffd39 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -511,7 +511,8 @@ config SENSORS_LM90 help If you say yes here you get support for National Semiconductor LM90, LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim - MAX6657, MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips. + MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and + MAX6681 sensor chips. This driver can also be built as a module. If so, the module will be called lm90. diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 85ba2c4feb4..fe09f82c42e 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -32,6 +32,11 @@ * supported by this driver. These chips lack the remote temperature * offset feature. * + * This driver also supports the MAX6646, MAX6647 and MAX6649 chips + * made by Maxim. These are again similar to the LM86, but they use + * unsigned temperature values and can report temperatures from 0 to + * 145 degrees. + * * This driver also supports the MAX6680 and MAX6681, two other sensor * chips made by Maxim. These are quite similar to the other Maxim * chips. The MAX6680 and MAX6681 only differ in the pinout so they can @@ -76,9 +81,10 @@ * Addresses to scan * Address is fully defined internally and cannot be changed except for * MAX6659, MAX6680 and MAX6681. - * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6657 and MAX6658 - * have address 0x4c. - * ADM1032-2, ADT7461-2, LM89-1, and LM99-1 have address 0x4d. + * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6649, MAX6657 + * and MAX6658 have address 0x4c. + * ADM1032-2, ADT7461-2, LM89-1, LM99-1 and MAX6646 have address 0x4d. + * MAX6647 has address 0x4e. * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported). * MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, * 0x4c, 0x4d or 0x4e. @@ -91,7 +97,8 @@ static const unsigned short normal_i2c[] = { * Insmod parameters */ -I2C_CLIENT_INSMOD_7(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680); +I2C_CLIENT_INSMOD_8(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, + max6646); /* * The LM90 registers @@ -132,7 +139,7 @@ I2C_CLIENT_INSMOD_7(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680); #define LM90_REG_R_TCRIT_HYST 0x21 #define LM90_REG_W_TCRIT_HYST 0x21 -/* MAX6657-specific registers */ +/* MAX6646/6647/6649/6657/6658/6659 registers */ #define MAX6657_REG_R_LOCAL_TEMPL 0x11 @@ -164,6 +171,9 @@ static const struct i2c_device_id lm90_id[] = { { "lm86", lm86 }, { "lm89", lm99 }, { "lm99", lm99 }, /* Missing temperature offset */ + { "max6646", max6646 }, + { "max6647", max6646 }, + { "max6649", max6646 }, { "max6657", max6657 }, { "max6658", max6657 }, { "max6659", max6657 }, @@ -205,7 +215,7 @@ struct lm90_data { s16 temp11[5]; /* 0: remote input 1: remote low limit 2: remote high limit - 3: remote offset (except max6657) + 3: remote offset (except max6646 and max6657) 4: local input */ u8 temp_hyst; u8 alarms; /* bitvector */ @@ -216,7 +226,8 @@ struct lm90_data { * For local temperatures and limits, critical limits and the hysteresis * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius. * For remote temperatures and limits, it uses signed 11-bit values with - * LSB = 0.125 degree Celsius, left-justified in 16-bit registers. + * LSB = 0.125 degree Celsius, left-justified in 16-bit registers. Some + * Maxim chips use unsigned values. */ static inline int temp_from_s8(s8 val) @@ -224,11 +235,21 @@ static inline int temp_from_s8(s8 val) return val * 1000; } +static inline int temp_from_u8(u8 val) +{ + return val * 1000; +} + static inline int temp_from_s16(s16 val) { return val / 32 * 125; } +static inline int temp_from_u16(u16 val) +{ + return val / 32 * 125; +} + static s8 temp_to_s8(long val) { if (val <= -128000) @@ -240,6 +261,15 @@ static s8 temp_to_s8(long val) return (val + 500) / 1000; } +static u8 temp_to_u8(long val) +{ + if (val <= 0) + return 0; + if (val >= 255000) + return 255; + return (val + 500) / 1000; +} + static s16 temp_to_s16(long val) { if (val <= -128000) @@ -331,6 +361,8 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, if (data->kind == adt7461) temp = temp_from_u8_adt7461(data, data->temp8[attr->index]); + else if (data->kind == max6646) + temp = temp_from_u8(data->temp8[attr->index]); else temp = temp_from_s8(data->temp8[attr->index]); @@ -356,6 +388,8 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, mutex_lock(&data->update_lock); if (data->kind == adt7461) data->temp8[nr] = temp_to_u8_adt7461(data, val); + else if (data->kind == max6646) + data->temp8[nr] = temp_to_u8(val); else data->temp8[nr] = temp_to_s8(val); i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]); @@ -372,6 +406,8 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, if (data->kind == adt7461) temp = temp_from_u16_adt7461(data, data->temp11[attr->index]); + else if (data->kind == max6646) + temp = temp_from_u16(data->temp11[attr->index]); else temp = temp_from_s16(data->temp11[attr->index]); @@ -401,12 +437,15 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, data->temp11[nr] = temp_to_u16_adt7461(data, val); else if (data->kind == max6657 || data->kind == max6680) data->temp11[nr] = temp_to_s8(val) << 8; + else if (data->kind == max6646) + data->temp11[nr] = temp_to_u8(val) << 8; else data->temp11[nr] = temp_to_s16(val); i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], data->temp11[nr] >> 8); - if (data->kind != max6657 && data->kind != max6680) + if (data->kind != max6657 && data->kind != max6680 + && data->kind != max6646) i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], data->temp11[nr] & 0xff); mutex_unlock(&data->update_lock); @@ -689,6 +728,16 @@ static int lm90_detect(struct i2c_client *new_client, int kind, && (reg_config1 & 0x03) == 0x00 && reg_convrate <= 0x07) { kind = max6680; + } else + /* The chip_id register of the MAX6646/6647/6649 + * holds the revision of the chip. + * The lowest 6 bits of the config1 register are + * unused and should return zero when read. + */ + if (chip_id == 0x59 + && (reg_config1 & 0x3f) == 0x00 + && reg_convrate <= 0x07) { + kind = max6646; } } @@ -719,6 +768,8 @@ static int lm90_detect(struct i2c_client *new_client, int kind, name = "max6680"; } else if (kind == adt7461) { name = "adt7461"; + } else if (kind == max6646) { + name = "max6646"; } strlcpy(info->type, name, I2C_NAME_SIZE); @@ -758,7 +809,7 @@ static int lm90_probe(struct i2c_client *new_client, &dev_attr_pec))) goto exit_remove_files; } - if (data->kind != max6657) { + if (data->kind != max6657 && data->kind != max6646) { if ((err = device_create_file(&new_client->dev, &sensor_dev_attr_temp2_offset.dev_attr))) goto exit_remove_files; @@ -824,7 +875,7 @@ static int lm90_remove(struct i2c_client *client) hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm90_group); device_remove_file(&client->dev, &dev_attr_pec); - if (data->kind != max6657) + if (data->kind != max6657 && data->kind != max6646) device_remove_file(&client->dev, &sensor_dev_attr_temp2_offset.dev_attr); @@ -881,7 +932,7 @@ static struct lm90_data *lm90_update_device(struct device *dev) lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[3]); lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst); - if (data->kind == max6657) { + if (data->kind == max6657 || data->kind == max6646) { lm90_read16(client, LM90_REG_R_LOCAL_TEMP, MAX6657_REG_R_LOCAL_TEMPL, &data->temp11[4]); @@ -896,6 +947,7 @@ static struct lm90_data *lm90_update_device(struct device *dev) if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h) == 0) { data->temp11[1] = h << 8; if (data->kind != max6657 && data->kind != max6680 + && data->kind != max6646 && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL, &l) == 0) data->temp11[1] |= l; @@ -903,12 +955,13 @@ static struct lm90_data *lm90_update_device(struct device *dev) if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h) == 0) { data->temp11[2] = h << 8; if (data->kind != max6657 && data->kind != max6680 + && data->kind != max6646 && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL, &l) == 0) data->temp11[2] |= l; } - if (data->kind != max6657) { + if (data->kind != max6657 && data->kind != max6646) { if (lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSH, &h) == 0 && lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSL, -- cgit v1.2.3-70-g09d2 From 47064d645bc55863c7887a7c96cde39c9a37ee5f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 17 Oct 2008 17:51:12 +0200 Subject: hwmon: (lm87) Add support for configuration through platform_data The lm87 driver normally assumes that firmware configured the chip correctly. Since this is not always the case, alllow platform code to set the channel register value via platform_data. All other configuration registers can be changed after driver initialisation. Signed-off-by: Ben Hutchings Signed-off-by: Jean Delvare --- Documentation/hwmon/lm87 | 9 ++++----- drivers/hwmon/lm87.c | 17 +++++++++++------ 2 files changed, 15 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/lm87 b/Documentation/hwmon/lm87 index ec27aa1b94c..6b47b67fd96 100644 --- a/Documentation/hwmon/lm87 +++ b/Documentation/hwmon/lm87 @@ -65,11 +65,10 @@ The LM87 has four pins which can serve one of two possible functions, depending on the hardware configuration. Some functions share pins, so not all functions are available at the same -time. Which are depends on the hardware setup. This driver assumes that -the BIOS configured the chip correctly. In that respect, it differs from -the original driver (from lm_sensors for Linux 2.4), which would force the -LM87 to an arbitrary, compile-time chosen mode, regardless of the actual -chipset wiring. +time. Which are depends on the hardware setup. This driver normally +assumes that firmware configured the chip correctly. Where this is not +the case, platform code must set the I2C client's platform_data to point +to a u8 value to be written to the channel register. For reference, here is the list of exclusive functions: - in0+in5 (default) or temp3 diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index fa0e3794d9a..2e4a3cea95f 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -21,11 +21,10 @@ * http://www.national.com/pf/LM/LM87.html * * Some functions share pins, so not all functions are available at the same - * time. Which are depends on the hardware setup. This driver assumes that - * the BIOS configured the chip correctly. In that respect, it differs from - * the original driver (from lm_sensors for Linux 2.4), which would force the - * LM87 to an arbitrary, compile-time chosen mode, regardless of the actual - * chipset wiring. + * time. Which are depends on the hardware setup. This driver normally + * assumes that firmware configured the chip correctly. Where this is not + * the case, platform code must set the I2C client's platform_data to point + * to a u8 value to be written to the channel register. * For reference, here is the list of exclusive functions: * - in0+in5 (default) or temp3 * - fan1 (default) or in6 @@ -843,7 +842,13 @@ static void lm87_init_client(struct i2c_client *client) { struct lm87_data *data = i2c_get_clientdata(client); - data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); + if (client->dev.platform_data) { + data->channel = *(u8 *)client->dev.platform_data; + lm87_write_value(client, + LM87_REG_CHANNEL_MODE, data->channel); + } else { + data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); + } data->config = lm87_read_value(client, LM87_REG_CONFIG) & 0x6F; if (!(data->config & 0x01)) { -- cgit v1.2.3-70-g09d2 From 34e7dc6ca4a663a1bb0a0a4e118426849dccd72d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 17 Oct 2008 17:51:13 +0200 Subject: hwmon: (lm85) Implement the standard PWM frequency interface Implement the standard PWM frequency interface: pwm[1-*]_freq in units of 1 Hz, instead of the non-standard pwm[1-*]_auto_pwm_freq in units of 0.1 Hz. The old naming was not only non-standard, it was also confusing, because it suggested that the frequency value only applied in automatic fan speed mode, which isn't true. Signed-off-by: Jean Delvare Acked-by: Herbert Poetzl --- Documentation/hwmon/lm85 | 10 ------- drivers/hwmon/lm85.c | 77 ++++++++++++++++++++++++------------------------ 2 files changed, 38 insertions(+), 49 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index 6d41db7f17f..40062074129 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -163,16 +163,6 @@ configured individually according to the following options. * pwm#_auto_pwm_min - this specifies the PWM value for temp#_auto_temp_off temperature. (PWM value from 0 to 255) -* pwm#_auto_pwm_freq - select base frequency of PWM output. You can select - in range of 10.0 to 94.0 Hz in .1 Hz units. - (Values 100 to 940). - -The pwm#_auto_pwm_freq can be set to one of the following 8 values. Setting the -frequency to a value not on this list, will result in the next higher frequency -being selected. The actual device frequency may vary slightly from this -specification as designed by the manufacturer. Consult the datasheet for more -details. (PWM Frequency values: 100, 150, 230, 300, 380, 470, 620, 940) - * pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature the bahaviour of fans. Write 1 to let fans spinning at pwm#_auto_pwm_min or write 0 to let them off. diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 3594a02f281..6b676df3547 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -191,8 +191,8 @@ static int RANGE_TO_REG(int range) #define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f] /* These are the PWM frequency encodings */ -static const int lm85_freq_map[] = { /* .1 Hz */ - 100, 150, 230, 300, 380, 470, 620, 940 +static const int lm85_freq_map[8] = { /* 1 Hz */ + 10, 15, 23, 30, 38, 47, 62, 94 }; static int FREQ_TO_REG(int freq) @@ -275,7 +275,6 @@ struct lm85_zone { struct lm85_autofan { u8 config; /* Register value */ - u8 freq; /* PWM frequency, encoded */ u8 min_pwm; /* Minimum PWM value, encoded */ u8 min_off; /* Min PWM or OFF below "limit", flag */ }; @@ -301,6 +300,7 @@ struct lm85_data { u16 fan[4]; /* Register value */ u16 fan_min[4]; /* Register value */ u8 pwm[3]; /* Register value */ + u8 pwm_freq[3]; /* Register encoding */ u8 temp_ext[3]; /* Decoded values */ u8 in_ext[8]; /* Decoded values */ u8 vid; /* Register value */ @@ -528,11 +528,38 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute return count; } +static ssize_t show_pwm_freq(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", FREQ_FROM_REG(data->pwm_freq[nr])); +} + +static ssize_t set_pwm_freq(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + data->pwm_freq[nr] = FREQ_TO_REG(val); + lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), + (data->zone[nr].range << 4) + | data->pwm_freq[nr]); + mutex_unlock(&data->update_lock); + return count; +} + #define show_pwm_reg(offset) \ static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ show_pwm, set_pwm, offset - 1); \ static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ - show_pwm_enable, set_pwm_enable, offset - 1) + show_pwm_enable, set_pwm_enable, offset - 1); \ +static SENSOR_DEVICE_ATTR(pwm##offset##_freq, S_IRUGO | S_IWUSR, \ + show_pwm_freq, set_pwm_freq, offset - 1) show_pwm_reg(1); show_pwm_reg(2); @@ -761,31 +788,6 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, return count; } -static ssize_t show_pwm_auto_pwm_freq(struct device *dev, - struct device_attribute *attr, char *buf) -{ - int nr = to_sensor_dev_attr(attr)->index; - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf, "%d\n", FREQ_FROM_REG(data->autofan[nr].freq)); -} - -static ssize_t set_pwm_auto_pwm_freq(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - int nr = to_sensor_dev_attr(attr)->index; - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - mutex_lock(&data->update_lock); - data->autofan[nr].freq = FREQ_TO_REG(val); - lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), - (data->zone[nr].range << 4) - | data->autofan[nr].freq); - mutex_unlock(&data->update_lock); - return count; -} - #define pwm_auto(offset) \ static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels, \ S_IRUGO | S_IWUSR, show_pwm_auto_channels, \ @@ -795,10 +797,7 @@ static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_min, \ set_pwm_auto_pwm_min, offset - 1); \ static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, \ S_IRUGO | S_IWUSR, show_pwm_auto_pwm_minctl, \ - set_pwm_auto_pwm_minctl, offset - 1); \ -static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_freq, \ - S_IRUGO | S_IWUSR, show_pwm_auto_pwm_freq, \ - set_pwm_auto_pwm_freq, offset - 1); + set_pwm_auto_pwm_minctl, offset - 1) pwm_auto(1); pwm_auto(2); @@ -867,7 +866,7 @@ static ssize_t set_temp_auto_temp_min(struct device *dev, TEMP_FROM_REG(data->zone[nr].limit)); lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), ((data->zone[nr].range & 0x0f) << 4) - | (data->autofan[nr].freq & 0x07)); + | (data->pwm_freq[nr] & 0x07)); /* Update temp_auto_hyst and temp_auto_off */ data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG( @@ -910,7 +909,7 @@ static ssize_t set_temp_auto_temp_max(struct device *dev, val - min); lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), ((data->zone[nr].range & 0x0f) << 4) - | (data->autofan[nr].freq & 0x07)); + | (data->pwm_freq[nr] & 0x07)); mutex_unlock(&data->update_lock); return count; } @@ -984,6 +983,9 @@ static struct attribute *lm85_attributes[] = { &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm3_freq.dev_attr.attr, &sensor_dev_attr_in0_input.dev_attr.attr, &sensor_dev_attr_in1_input.dev_attr.attr, @@ -1026,9 +1028,6 @@ static struct attribute *lm85_attributes[] = { &sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr, &sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr, &sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_pwm_freq.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_pwm_freq.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_pwm_freq.dev_attr.attr, &sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr, &sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr, @@ -1458,7 +1457,7 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->autofan[i].config = lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); - data->autofan[i].freq = val & 0x07; + data->pwm_freq[i] = val & 0x07; data->zone[i].range = val >> 4; data->autofan[i].min_pwm = lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); -- cgit v1.2.3-70-g09d2 From 4ed1077953f531b3fef4af4b4ade48a828c48869 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 17 Oct 2008 17:51:16 +0200 Subject: hwmon: (it87) Fix thermal sensor type values The it87 driver doesn't follow the standard sensor type values as documented in Documentation/hwmon/sysfs-interface. It uses value 2 for thermistors instead of value 4. This causes "sensors" to tell the user that the chip is setup for a transistor while it is actually setup for a thermistor. Using value 4 for thermistors solves the problem. For compatibility reasons, we still accept value 2 but emit a warning message so that users update their configuration files. Signed-off-by: Jean Delvare Acked-by: Hans de Goede --- Documentation/hwmon/it87 | 4 ++-- drivers/hwmon/it87.c | 11 ++++++++--- 2 files changed, 10 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 3496b7020e7..042c0415140 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -136,10 +136,10 @@ once-only alarms. The IT87xx only updates its values each 1.5 seconds; reading it more often will do no harm, but will return 'old' values. -To change sensor N to a thermistor, 'echo 2 > tempN_type' where N is 1, 2, +To change sensor N to a thermistor, 'echo 4 > tempN_type' where N is 1, 2, or 3. To change sensor N to a thermal diode, 'echo 3 > tempN_type'. Give 0 for unused sensor. Any other value is invalid. To configure this at -startup, consult lm_sensors's /etc/sensors.conf. (2 = thermistor; +startup, consult lm_sensors's /etc/sensors.conf. (4 = thermistor; 3 = thermal diode) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index d793cc01199..b74c95735f9 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -477,7 +477,7 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *attr, if (reg & (1 << nr)) return sprintf(buf, "3\n"); /* thermal diode */ if (reg & (8 << nr)) - return sprintf(buf, "2\n"); /* thermistor */ + return sprintf(buf, "4\n"); /* thermistor */ return sprintf(buf, "0\n"); /* disabled */ } static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, @@ -493,10 +493,15 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, data->sensor &= ~(1 << nr); data->sensor &= ~(8 << nr); - /* 3 = thermal diode; 2 = thermistor; 0 = disabled */ + if (val == 2) { /* backwards compatibility */ + dev_warn(dev, "Sensor type 2 is deprecated, please use 4 " + "instead\n"); + val = 4; + } + /* 3 = thermal diode; 4 = thermistor; 0 = disabled */ if (val == 3) data->sensor |= 1 << nr; - else if (val == 2) + else if (val == 4) data->sensor |= 8 << nr; else if (val != 0) { mutex_unlock(&data->update_lock); -- cgit v1.2.3-70-g09d2 From 6495ce184033d5e70dfdf5bb8d149e9e02feaaa9 Mon Sep 17 00:00:00 2001 From: Marc Hulsman Date: Fri, 17 Oct 2008 17:51:17 +0200 Subject: hwmon: (w83791d) add manual PWM support Add PWM manual control. Signed-off-by: Marc Hulsman Acked-by: Hans de Goede Signed-off-by: Jean Delvare --- Documentation/hwmon/w83791d | 15 ++++++---- drivers/hwmon/w83791d.c | 67 ++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 75 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index a67d3b7a709..49c0e94a118 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -58,29 +58,32 @@ internal state that allows no clean access (Bank with ID register is not currently selected). If you know the address of the chip, use a 'force' parameter; this will put it into a more well-behaved state first. -The driver implements three temperature sensors, five fan rotation speed -sensors, and ten voltage sensors. +The driver implements three temperature sensors, ten voltage sensors, +five fan rotation speed sensors and manual PWM control of each fan. Temperatures are measured in degrees Celsius and measurement resolution is 1 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when the temperature gets higher than the Overtemperature Shutdown value; it stays on until the temperature falls below the Hysteresis value. +Voltage sensors (also known as IN sensors) report their values in millivolts. +An alarm is triggered if the voltage has crossed a programmable minimum +or maximum limit. + Fan rotation speeds are reported in RPM (rotations per minute). An alarm is triggered if the rotation speed has dropped below a programmable limit. Fan readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64 or 128 for all fans) to give the readings more range or accuracy. -Voltage sensors (also known as IN sensors) report their values in millivolts. -An alarm is triggered if the voltage has crossed a programmable minimum -or maximum limit. +Each fan controlled is controlled by PWM. The PWM duty cycle can be read and +set for each fan separately. Valid values range from 0 (stop) to 255 (full). The w83791d has a global bit used to enable beeping from the speaker when an alarm is triggered as well as a bitmask to enable or disable the beep for specific alarms. You need both the global beep enable bit and the corresponding beep bit to be on for a triggered alarm to sound a beep. -The sysfs interface to the gloabal enable is via the sysfs beep_enable file. +The sysfs interface to the global enable is via the sysfs beep_enable file. This file is used for both legacy and new code. The sysfs interface to the beep bitmask has migrated from the original legacy diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 6b1cec9950f..a8ff4e12671 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -23,7 +23,7 @@ Supports following chips: Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA - w83791d 10 5 3 3 0x71 0x5ca3 yes no + w83791d 10 5 5 3 0x71 0x5ca3 yes no The w83791d chip appears to be part way between the 83781d and the 83792d. Thus, this file is derived from both the w83792d.c and @@ -45,6 +45,7 @@ #define NUMBER_OF_VIN 10 #define NUMBER_OF_FANIN 5 #define NUMBER_OF_TEMPIN 3 +#define NUMBER_OF_PWM 5 /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, @@ -116,6 +117,14 @@ static const u8 W83791D_REG_FAN_MIN[NUMBER_OF_FANIN] = { 0xBD, /* FAN 5 Count Low Limit in DataSheet */ }; +static const u8 W83791D_REG_PWM[NUMBER_OF_PWM] = { + 0x81, /* PWM 1 duty cycle register in DataSheet */ + 0x83, /* PWM 2 duty cycle register in DataSheet */ + 0x94, /* PWM 3 duty cycle register in DataSheet */ + 0xA0, /* PWM 4 duty cycle register in DataSheet */ + 0xA1, /* PWM 5 duty cycle register in DataSheet */ +}; + static const u8 W83791D_REG_FAN_CFG[2] = { 0x84, /* FAN 1/2 configuration */ 0x95, /* FAN 3 configuration */ @@ -276,6 +285,9 @@ struct w83791d_data { two sensors with three values (cur, over, hyst) */ + /* PWMs */ + u8 pwm[5]; /* pwm duty cycle */ + /* Misc */ u32 alarms; /* realtime status register encoding,combined */ u8 beep_enable; /* Global beep enable */ @@ -653,6 +665,48 @@ static struct sensor_device_attribute sda_fan_alarm[] = { SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22), }; +/* read/write PWMs */ +static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83791d_data *data = w83791d_update_device(dev); + return sprintf(buf, "%u\n", data->pwm[nr]); +} + +static ssize_t store_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int nr = sensor_attr->index; + unsigned long val; + + if (strict_strtoul(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->pwm[nr] = SENSORS_LIMIT(val, 0, 255); + w83791d_write(client, W83791D_REG_PWM[nr], data->pwm[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static struct sensor_device_attribute sda_pwm[] = { + SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, + show_pwm, store_pwm, 0), + SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, + show_pwm, store_pwm, 1), + SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, + show_pwm, store_pwm, 2), + SENSOR_ATTR(pwm4, S_IWUSR | S_IRUGO, + show_pwm, store_pwm, 3), + SENSOR_ATTR(pwm5, S_IWUSR | S_IRUGO, + show_pwm, store_pwm, 4), +}; + /* read/write the temperature1, includes measured value and limits */ static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr, char *buf) @@ -917,6 +971,9 @@ static struct attribute *w83791d_attributes[] = { &sda_beep_ctrl[1].dev_attr.attr, &dev_attr_cpu0_vid.attr, &dev_attr_vrm.attr, + &sda_pwm[0].dev_attr.attr, + &sda_pwm[1].dev_attr.attr, + &sda_pwm[2].dev_attr.attr, NULL }; @@ -930,6 +987,8 @@ static const struct attribute_group w83791d_group = { static struct attribute *w83791d_attributes_fanpwm45[] = { FAN_UNIT_ATTRS(3), FAN_UNIT_ATTRS(4), + &sda_pwm[3].dev_attr.attr, + &sda_pwm[4].dev_attr.attr, NULL }; @@ -1260,6 +1319,12 @@ static struct w83791d_data *w83791d_update_device(struct device *dev) for (i = 0; i < 3; i++) data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04; + /* Update PWM duty cycle */ + for (i = 0; i < NUMBER_OF_PWM; i++) { + data->pwm[i] = w83791d_read(client, + W83791D_REG_PWM[i]); + } + /* Update the first temperature sensor */ for (i = 0; i < 3; i++) { data->temp1[i] = w83791d_read(client, -- cgit v1.2.3-70-g09d2 From b5938f8c4a530b2fad18f2293ffaf79ac9f5a148 Mon Sep 17 00:00:00 2001 From: Marc Hulsman Date: Fri, 17 Oct 2008 17:51:17 +0200 Subject: hwmon: (w83791d) add pwm_enable support Add support for pwm_enable. Signed-off-by: Marc Hulsman Acked-by: Hans de Goede Signed-off-by: Jean Delvare --- Documentation/hwmon/w83791d | 13 +++++++- drivers/hwmon/w83791d.c | 79 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 91 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index 49c0e94a118..b1e4798764e 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -108,6 +108,17 @@ going forward. The driver reads the hardware chip values at most once every three seconds. User mode code requesting values more often will receive cached values. +/sys files +---------- +The sysfs-interface is documented in the 'sysfs-interface' file. Only +chip-specific options are documented here. + +pwm[1-3]_enable - this file controls mode of fan/temperature control for + fan 1-3. Fan/PWM 4-5 only support manual mode. + * 1 Manual mode + * 2 Thermal Cruise mode (no further support) + * 3 Fan Speed Cruise mode (no further support) + Alarms bitmap vs. beep_mask bitmask ------------------------------------ For legacy code using the alarms and beep_mask files: @@ -138,4 +149,4 @@ global_enable: alarms: -------- beep_mask: 0x800000 (modified via beep_enable) W83791D TODO: --------------- -Provide a patch for smart-fan control (still need appropriate motherboard/fans) +Provide a patch for Thermal Cruise registers. diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index a8ff4e12671..a4d2b02d9e0 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -287,6 +287,8 @@ struct w83791d_data { /* PWMs */ u8 pwm[5]; /* pwm duty cycle */ + u8 pwm_enable[3]; /* pwm enable status for fan 1-3 + (fan 4-5 only support manual mode) */ /* Misc */ u32 alarms; /* realtime status register encoding,combined */ @@ -707,6 +709,71 @@ static struct sensor_device_attribute sda_pwm[] = { show_pwm, store_pwm, 4), }; +static ssize_t show_pwmenable(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83791d_data *data = w83791d_update_device(dev); + return sprintf(buf, "%u\n", data->pwm_enable[nr] + 1); +} + +static ssize_t store_pwmenable(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int nr = sensor_attr->index; + unsigned long val; + u8 reg_cfg_tmp; + u8 reg_idx = 0; + u8 val_shift = 0; + u8 keep_mask = 0; + + int ret = strict_strtoul(buf, 10, &val); + + if (ret || val < 1 || val > 3) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->pwm_enable[nr] = val - 1; + switch (nr) { + case 0: + reg_idx = 0; + val_shift = 2; + keep_mask = 0xf3; + break; + case 1: + reg_idx = 0; + val_shift = 4; + keep_mask = 0xcf; + break; + case 2: + reg_idx = 1; + val_shift = 2; + keep_mask = 0xf3; + break; + } + + reg_cfg_tmp = w83791d_read(client, W83791D_REG_FAN_CFG[reg_idx]); + reg_cfg_tmp = (reg_cfg_tmp & keep_mask) | + data->pwm_enable[nr] << val_shift; + + w83791d_write(client, W83791D_REG_FAN_CFG[reg_idx], reg_cfg_tmp); + mutex_unlock(&data->update_lock); + + return count; +} +static struct sensor_device_attribute sda_pwmenable[] = { + SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 0), + SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 1), + SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, + show_pwmenable, store_pwmenable, 2), +}; + /* read/write the temperature1, includes measured value and limits */ static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr, char *buf) @@ -974,6 +1041,9 @@ static struct attribute *w83791d_attributes[] = { &sda_pwm[0].dev_attr.attr, &sda_pwm[1].dev_attr.attr, &sda_pwm[2].dev_attr.attr, + &sda_pwmenable[0].dev_attr.attr, + &sda_pwmenable[1].dev_attr.attr, + &sda_pwmenable[2].dev_attr.attr, NULL }; @@ -1325,6 +1395,15 @@ static struct w83791d_data *w83791d_update_device(struct device *dev) W83791D_REG_PWM[i]); } + /* Update PWM enable status */ + for (i = 0; i < 2; i++) { + reg_array_tmp[i] = w83791d_read(client, + W83791D_REG_FAN_CFG[i]); + } + data->pwm_enable[0] = (reg_array_tmp[0] >> 2) & 0x03; + data->pwm_enable[1] = (reg_array_tmp[0] >> 4) & 0x03; + data->pwm_enable[2] = (reg_array_tmp[1] >> 2) & 0x03; + /* Update the first temperature sensor */ for (i = 0; i < 3; i++) { data->temp1[i] = w83791d_read(client, -- cgit v1.2.3-70-g09d2 From a5a4598cd2e7cae456a7f2a100bf0e5c3c7811c7 Mon Sep 17 00:00:00 2001 From: Marc Hulsman Date: Fri, 17 Oct 2008 17:51:17 +0200 Subject: hwmon: (w83791d) add support for thermal cruise mode Add support to set target temperature and tolerance for thermal cruise mode. Signed-off-by: Marc Hulsman Acked-by: Hans de Goede Signed-off-by: Jean Delvare --- Documentation/hwmon/w83791d | 19 ++++-- drivers/hwmon/w83791d.c | 148 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 162 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index b1e4798764e..5663e491655 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -77,6 +77,9 @@ readings can be divided by a programmable divider (1, 2, 4, 8, 16, Each fan controlled is controlled by PWM. The PWM duty cycle can be read and set for each fan separately. Valid values range from 0 (stop) to 255 (full). +PWM 1-3 support Thermal Cruise mode, in which the PWMs are automatically +regulated to keep respectively temp 1-3 at a certain target temperature. +See below for the description of the sysfs-interface. The w83791d has a global bit used to enable beeping from the speaker when an alarm is triggered as well as a bitmask to enable or disable the beep for @@ -116,9 +119,19 @@ chip-specific options are documented here. pwm[1-3]_enable - this file controls mode of fan/temperature control for fan 1-3. Fan/PWM 4-5 only support manual mode. * 1 Manual mode - * 2 Thermal Cruise mode (no further support) + * 2 Thermal Cruise mode * 3 Fan Speed Cruise mode (no further support) +temp[1-3]_target - defines the target temperature for Thermal Cruise mode. + Unit: millidegree Celsius + RW + +temp[1-3]_tolerance - temperature tolerance for Thermal Cruise mode. + Specifies an interval around the target temperature + in which the fan speed is not changed. + Unit: millidegree Celsius + RW + Alarms bitmap vs. beep_mask bitmask ------------------------------------ For legacy code using the alarms and beep_mask files: @@ -146,7 +159,3 @@ tart2 : alarms: 0x020000 beep_mask: 0x080000 <== mismatch tart3 : alarms: 0x040000 beep_mask: 0x100000 <== mismatch case_open : alarms: 0x001000 beep_mask: 0x001000 global_enable: alarms: -------- beep_mask: 0x800000 (modified via beep_enable) - -W83791D TODO: ---------------- -Provide a patch for Thermal Cruise registers. diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index a4d2b02d9e0..5768def8a4f 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -125,6 +125,17 @@ static const u8 W83791D_REG_PWM[NUMBER_OF_PWM] = { 0xA1, /* PWM 5 duty cycle register in DataSheet */ }; +static const u8 W83791D_REG_TEMP_TARGET[3] = { + 0x85, /* PWM 1 target temperature for temp 1 */ + 0x86, /* PWM 2 target temperature for temp 2 */ + 0x96, /* PWM 3 target temperature for temp 3 */ +}; + +static const u8 W83791D_REG_TEMP_TOL[2] = { + 0x87, /* PWM 1/2 temperature tolerance */ + 0x97, /* PWM 3 temperature tolerance */ +}; + static const u8 W83791D_REG_FAN_CFG[2] = { 0x84, /* FAN 1/2 configuration */ 0x95, /* FAN 3 configuration */ @@ -234,6 +245,15 @@ static u8 fan_to_reg(long rpm, int div) (val) < 0 ? ((val) - 250) / 500 * 128 : \ ((val) + 250) / 500 * 128) +/* for thermal cruise target temp, 7-bits, LSB = 1 degree Celsius */ +#define TARGET_TEMP_TO_REG(val) ((val) < 0 ? 0 : \ + (val) >= 127000 ? 127 : \ + ((val) + 500) / 1000) + +/* for thermal cruise temp tolerance, 4-bits, LSB = 1 degree Celsius */ +#define TOL_TEMP_TO_REG(val) ((val) < 0 ? 0 : \ + (val) >= 15000 ? 15 : \ + ((val) + 500) / 1000) #define BEEP_MASK_TO_REG(val) ((val) & 0xffffff) #define BEEP_MASK_FROM_REG(val) ((val) & 0xffffff) @@ -290,6 +310,9 @@ struct w83791d_data { u8 pwm_enable[3]; /* pwm enable status for fan 1-3 (fan 4-5 only support manual mode) */ + u8 temp_target[3]; /* pwm 1-3 target temperature */ + u8 temp_tolerance[3]; /* pwm 1-3 temperature tolerance */ + /* Misc */ u32 alarms; /* realtime status register encoding,combined */ u8 beep_enable; /* Global beep enable */ @@ -774,6 +797,110 @@ static struct sensor_device_attribute sda_pwmenable[] = { show_pwmenable, store_pwmenable, 2), }; +/* For Smart Fan I / Thermal Cruise */ +static ssize_t show_temp_target(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct w83791d_data *data = w83791d_update_device(dev); + int nr = sensor_attr->index; + return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp_target[nr])); +} + +static ssize_t store_temp_target(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int nr = sensor_attr->index; + unsigned long val; + u8 target_mask; + + if (strict_strtoul(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->temp_target[nr] = TARGET_TEMP_TO_REG(val); + target_mask = w83791d_read(client, + W83791D_REG_TEMP_TARGET[nr]) & 0x80; + w83791d_write(client, W83791D_REG_TEMP_TARGET[nr], + data->temp_target[nr] | target_mask); + mutex_unlock(&data->update_lock); + return count; +} + +static struct sensor_device_attribute sda_temp_target[] = { + SENSOR_ATTR(temp1_target, S_IWUSR | S_IRUGO, + show_temp_target, store_temp_target, 0), + SENSOR_ATTR(temp2_target, S_IWUSR | S_IRUGO, + show_temp_target, store_temp_target, 1), + SENSOR_ATTR(temp3_target, S_IWUSR | S_IRUGO, + show_temp_target, store_temp_target, 2), +}; + +static ssize_t show_temp_tolerance(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct w83791d_data *data = w83791d_update_device(dev); + int nr = sensor_attr->index; + return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp_tolerance[nr])); +} + +static ssize_t store_temp_tolerance(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int nr = sensor_attr->index; + unsigned long val; + u8 target_mask; + u8 reg_idx = 0; + u8 val_shift = 0; + u8 keep_mask = 0; + + if (strict_strtoul(buf, 10, &val)) + return -EINVAL; + + switch (nr) { + case 0: + reg_idx = 0; + val_shift = 0; + keep_mask = 0xf0; + break; + case 1: + reg_idx = 0; + val_shift = 4; + keep_mask = 0x0f; + break; + case 2: + reg_idx = 1; + val_shift = 0; + keep_mask = 0xf0; + break; + } + + mutex_lock(&data->update_lock); + data->temp_tolerance[nr] = TOL_TEMP_TO_REG(val); + target_mask = w83791d_read(client, + W83791D_REG_TEMP_TOL[reg_idx]) & keep_mask; + w83791d_write(client, W83791D_REG_TEMP_TOL[reg_idx], + (data->temp_tolerance[nr] << val_shift) | target_mask); + mutex_unlock(&data->update_lock); + return count; +} + +static struct sensor_device_attribute sda_temp_tolerance[] = { + SENSOR_ATTR(temp1_tolerance, S_IWUSR | S_IRUGO, + show_temp_tolerance, store_temp_tolerance, 0), + SENSOR_ATTR(temp2_tolerance, S_IWUSR | S_IRUGO, + show_temp_tolerance, store_temp_tolerance, 1), + SENSOR_ATTR(temp3_tolerance, S_IWUSR | S_IRUGO, + show_temp_tolerance, store_temp_tolerance, 2), +}; + /* read/write the temperature1, includes measured value and limits */ static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr, char *buf) @@ -1044,6 +1171,12 @@ static struct attribute *w83791d_attributes[] = { &sda_pwmenable[0].dev_attr.attr, &sda_pwmenable[1].dev_attr.attr, &sda_pwmenable[2].dev_attr.attr, + &sda_temp_target[0].dev_attr.attr, + &sda_temp_target[1].dev_attr.attr, + &sda_temp_target[2].dev_attr.attr, + &sda_temp_tolerance[0].dev_attr.attr, + &sda_temp_tolerance[1].dev_attr.attr, + &sda_temp_tolerance[2].dev_attr.attr, NULL }; @@ -1404,6 +1537,21 @@ static struct w83791d_data *w83791d_update_device(struct device *dev) data->pwm_enable[1] = (reg_array_tmp[0] >> 4) & 0x03; data->pwm_enable[2] = (reg_array_tmp[1] >> 2) & 0x03; + /* Update PWM target temperature */ + for (i = 0; i < 3; i++) { + data->temp_target[i] = w83791d_read(client, + W83791D_REG_TEMP_TARGET[i]) & 0x7f; + } + + /* Update PWM temperature tolerance */ + for (i = 0; i < 2; i++) { + reg_array_tmp[i] = w83791d_read(client, + W83791D_REG_TEMP_TOL[i]); + } + data->temp_tolerance[0] = reg_array_tmp[0] & 0x0f; + data->temp_tolerance[1] = (reg_array_tmp[0] >> 4) & 0x0f; + data->temp_tolerance[2] = reg_array_tmp[1] & 0x0f; + /* Update the first temperature sensor */ for (i = 0; i < 3; i++) { data->temp1[i] = w83791d_read(client, -- cgit v1.2.3-70-g09d2 From 6aa693b85257cd41fdb3554016b663519dbf9d14 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 17 Oct 2008 17:51:17 +0200 Subject: hwmon: Drop dead links to old National Semiconductor chip datasheets Signed-off-by: Jean Delvare --- Documentation/hwmon/pc87360 | 7 +------ Documentation/hwmon/pc87427 | 2 +- 2 files changed, 2 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/pc87360 b/Documentation/hwmon/pc87360 index 89a8fcfa78d..cbac32b59c8 100644 --- a/Documentation/hwmon/pc87360 +++ b/Documentation/hwmon/pc87360 @@ -5,12 +5,7 @@ Supported chips: * National Semiconductor PC87360, PC87363, PC87364, PC87365 and PC87366 Prefixes: 'pc87360', 'pc87363', 'pc87364', 'pc87365', 'pc87366' Addresses scanned: none, address read from Super I/O config space - Datasheets: - http://www.national.com/pf/PC/PC87360.html - http://www.national.com/pf/PC/PC87363.html - http://www.national.com/pf/PC/PC87364.html - http://www.national.com/pf/PC/PC87365.html - http://www.national.com/pf/PC/PC87366.html + Datasheets: No longer available Authors: Jean Delvare diff --git a/Documentation/hwmon/pc87427 b/Documentation/hwmon/pc87427 index 9a0708f9f49..d1ebbe510f3 100644 --- a/Documentation/hwmon/pc87427 +++ b/Documentation/hwmon/pc87427 @@ -5,7 +5,7 @@ Supported chips: * National Semiconductor PC87427 Prefix: 'pc87427' Addresses scanned: none, address read from Super I/O config space - Datasheet: http://www.winbond.com.tw/E-WINBONDHTM/partner/apc_007.html + Datasheet: No longer available Author: Jean Delvare -- cgit v1.2.3-70-g09d2 From 10c08f937d832e1d5a77e65767a6e2c05bc25c69 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 17 Oct 2008 17:51:18 +0200 Subject: hwmon: (w83781d) Additional information about AS99127F PWM This information was provided in lm-sensors ticket #2350: http://www.lm-sensors.org/ticket/2350 This is IMHO still not enough to be able to safely implement fan control support for the AS99127F, but this is valuable information so I am adding it to the documentation. Signed-off-by: Jean Delvare --- Documentation/hwmon/w83781d | 37 +++++++++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d index 6f800a0283e..c91e0b63ea1 100644 --- a/Documentation/hwmon/w83781d +++ b/Documentation/hwmon/w83781d @@ -353,7 +353,7 @@ in6=255 # PWM -Additional info about PWM on the AS99127F (may apply to other Asus +* Additional info about PWM on the AS99127F (may apply to other Asus chips as well) by Jean Delvare as of 2004-04-09: AS99127F revision 2 seems to have two PWM registers at 0x59 and 0x5A, @@ -396,7 +396,7 @@ Please contact us if you can figure out how it is supposed to work. As long as we don't know more, the w83781d driver doesn't handle PWM on AS99127F chips at all. -Additional info about PWM on the AS99127F rev.1 by Hector Martin: +* Additional info about PWM on the AS99127F rev.1 by Hector Martin: I've been fiddling around with the (in)famous 0x59 register and found out the following values do work as a form of coarse pwm: @@ -418,3 +418,36 @@ change. My mobo is an ASUS A7V266-E. This behavior is similar to what I got with speedfan under Windows, where 0-15% would be off, 15-2x% (can't remember the exact value) would be 70% and higher would be full on. + +* Additional info about PWM on the AS99127F rev.1 from lm-sensors + ticket #2350: + +I conducted some experiment on Asus P3B-F motherboard with AS99127F +(Ver. 1). + +I confirm that 0x59 register control the CPU_Fan Header on this +motherboard, and 0x5a register control PWR_Fan. + +In order to reduce the dependency of specific fan, the measurement is +conducted with a digital scope without fan connected. I found out that +P3B-F actually output variable DC voltage on fan header center pin, +looks like PWM is filtered on this motherboard. + +Here are some of measurements: + +0x80 20 mV +0x81 20 mV +0x82 232 mV +0x83 1.2 V +0x84 2.31 V +0x85 3.44 V +0x86 4.62 V +0x87 5.81 V +0x88 7.01 V +9x89 8.22 V +0x8a 9.42 V +0x8b 10.6 V +0x8c 11.9 V +0x8d 12.4 V +0x8e 12.4 V +0x8f 12.4 V -- cgit v1.2.3-70-g09d2 From d664a4809e73c878a43607d584b2e2b60fd07468 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 17 Oct 2008 17:51:20 +0200 Subject: hwmon: (adt7470) Add documentation Add at least the bare minimum of documentation for this chip. Signed-off-by: Darrick J. Wong Signed-off-by: Jean Delvare --- Documentation/hwmon/adt7470 | 76 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) create mode 100644 Documentation/hwmon/adt7470 (limited to 'Documentation') diff --git a/Documentation/hwmon/adt7470 b/Documentation/hwmon/adt7470 new file mode 100644 index 00000000000..75d13ca147c --- /dev/null +++ b/Documentation/hwmon/adt7470 @@ -0,0 +1,76 @@ +Kernel driver adt7470 +===================== + +Supported chips: + * Analog Devices ADT7470 + Prefix: 'adt7470' + Addresses scanned: I2C 0x2C, 0x2E, 0x2F + Datasheet: Publicly available at the Analog Devices website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Analog Devices ADT7470 chip. There may +be other chips that implement this interface. + +The ADT7470 uses the 2-wire interface compatible with the SMBus 2.0 +specification. Using an analog to digital converter it measures up to ten (10) +external temperatures. It has four (4) 16-bit counters for measuring fan speed. +There are four (4) PWM outputs that can be used to control fan speed. + +A sophisticated control system for the PWM outputs is designed into the ADT7470 +that allows fan speed to be adjusted automatically based on any of the ten +temperature sensors. Each PWM output is individually adjustable and +programmable. Once configured, the ADT7470 will adjust the PWM outputs in +response to the measured temperatures with further host intervention. This +feature can also be disabled for manual control of the PWM's. + +Each of the measured inputs (temperature, fan speed) has corresponding high/low +limit values. The ADT7470 will signal an ALARM if any measured value exceeds +either limit. + +The ADT7470 DOES NOT sample all inputs continuously. A single pin on the +ADT7470 is connected to a multitude of thermal diodes, but the chip must be +instructed explicitly to read the multitude of diodes. If you want to use +automatic fan control mode, you must manually read any of the temperature +sensors or the fan control algorithm will not run. The chip WILL NOT DO THIS +AUTOMATICALLY; this must be done from userspace. This may be a bug in the chip +design, given that many other AD chips take care of this. The driver will not +read the registers more often than once every 5 seconds. Further, +configuration data is only read once per minute. + +Special Features +---------------- + +The ADT7470 has a 8-bit ADC and is capable of measuring temperatures with 1 +degC resolution. + +The Analog Devices datasheet is very detailed and describes a procedure for +determining an optimal configuration for the automatic PWM control. + +Configuration Notes +------------------- + +Besides standard interfaces driver adds the following: + +* PWM Control + +* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and +* pwm#_auto_point2_pwm and pwm#_auto_point2_temp - + +point1: Set the pwm speed at a lower temperature bound. +point2: Set the pwm speed at a higher temperature bound. + +The ADT7470 will scale the pwm between the lower and higher pwm speed when +the temperature is between the two temperature boundaries. PWM values range +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the +temperature sensor associated with the PWM control exceeds +pwm#_auto_point2_temp. + +Notes +----- + +As stated above, the temperature inputs must be read periodically from +userspace in order for the automatic pwm algorithm to run. -- cgit v1.2.3-70-g09d2 From a636da6bab3307fc8c6e6a22a63b0b25ba0687be Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 15 Oct 2008 17:00:31 -0300 Subject: V4L/DVB (9247): au0828: add support for another USB id for Hauppauge HVR950Q Add autodetection support for a new revision of the Hauppauge HVR950Q (2040:721e) Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.au0828 | 2 +- drivers/media/video/au0828/au0828-cards.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828 index aa05e5bb22f..d5cb4ea287b 100644 --- a/Documentation/video4linux/CARDLIST.au0828 +++ b/Documentation/video4linux/CARDLIST.au0828 @@ -1,5 +1,5 @@ 0 -> Unknown board (au0828) - 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008] + 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721e,2040:721f,2040:7280,0fd9:0008] 2 -> Hauppauge HVR850 (au0828) [2040:7240] 3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620] 4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281] diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 5f07a8a072b..66e0edd5861 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -90,6 +90,7 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data) case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */ + case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */ case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */ case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */ break; @@ -198,6 +199,8 @@ struct usb_device_id au0828_usb_id_table [] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x2040, 0x721b), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x721e), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x2040, 0x721f), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x2040, 0x7280), -- cgit v1.2.3-70-g09d2 From 953cafc04e9ef9d2fd9f8afb3b3bbde1f8bb9317 Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Wed, 15 Oct 2008 14:14:30 -0300 Subject: V4L/DVB (9268): tuner: add FMD1216MEX tuner This tuner was already supported by proxy as an FMD1216ME, however, the MEX uses a different FM Radio IF so this addition is now required. Signed-off-by: Darron Broad Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.tuner | 1 + drivers/media/common/tuners/tuner-simple.c | 2 ++ drivers/media/common/tuners/tuner-types.c | 33 +++++++++++++++++++++++++++++- drivers/media/video/tveeprom.c | 2 +- include/media/tuner.h | 1 + 5 files changed, 37 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index 30bbdda68d0..691d2f37dc5 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -75,3 +75,4 @@ tuner=73 - Samsung TCPG 6121P30A tuner=75 - Philips TEA5761 FM Radio tuner=76 - Xceive 5000 tuner tuner=77 - TCL tuner MF02GIP-5N-E +tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index 2a1aac1cc75..fb3f3b3adab 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -493,6 +493,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer) case TUNER_PHILIPS_FM1216ME_MK3: case TUNER_PHILIPS_FM1236_MK3: case TUNER_PHILIPS_FMD1216ME_MK3: + case TUNER_PHILIPS_FMD1216MEX_MK3: case TUNER_LG_NTSC_TAPE: case TUNER_PHILIPS_FM1256_IH3: case TUNER_TCL_MF02GIP_5N: @@ -767,6 +768,7 @@ static void simple_set_dvb(struct dvb_frontend *fe, u8 *buf, switch (priv->type) { case TUNER_PHILIPS_FMD1216ME_MK3: + case TUNER_PHILIPS_FMD1216MEX_MK3: if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ && params->frequency >= 158870000) buf[3] |= 0x08; diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index 04961a1f44b..7c0bc064c00 100644 --- a/drivers/media/common/tuners/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -946,7 +946,7 @@ static struct tuner_params tuner_tena_9533_di_params[] = { }, }; -/* ------------ TUNER_PHILIPS_FMD1216ME_MK3 - Philips PAL ------------ */ +/* ------------ TUNER_PHILIPS_FMD1216ME(X)_MK3 - Philips PAL ------------ */ static struct tuner_range tuner_philips_fmd1216me_mk3_pal_ranges[] = { { 16 * 160.00 /*MHz*/, 0x86, 0x51, }, @@ -984,6 +984,27 @@ static struct tuner_params tuner_philips_fmd1216me_mk3_params[] = { }, }; +static struct tuner_params tuner_philips_fmd1216mex_mk3_params[] = { + { + .type = TUNER_PARAM_TYPE_PAL, + .ranges = tuner_philips_fmd1216me_mk3_pal_ranges, + .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_pal_ranges), + .has_tda9887 = 1, + .port1_active = 1, + .port2_active = 1, + .port2_fm_high_sensitivity = 1, + .port2_invert_for_secam_lc = 1, + .port1_set_for_fm_mono = 1, + .radio_if = 1, + .fm_gain_normal = 1, + }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_philips_fmd1216me_mk3_dvb_ranges, + .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_dvb_ranges), + .iffreq = 16 * 36.125, /*MHz*/ + }, +}; /* ------ TUNER_LG_TDVS_H06XF - LG INNOTEK / INFINEON ATSC ----- */ @@ -1663,6 +1684,16 @@ struct tunertype tuners[] = { .params = tuner_tcl_mf02gip_5n_params, .count = ARRAY_SIZE(tuner_tcl_mf02gip_5n_params), }, + [TUNER_PHILIPS_FMD1216MEX_MK3] = { /* Philips PAL */ + .name = "Philips FMD1216MEX MK3 Hybrid Tuner", + .params = tuner_philips_fmd1216mex_mk3_params, + .count = ARRAY_SIZE(tuner_philips_fmd1216mex_mk3_params), + .min = 16 * 50.87, + .max = 16 * 858.00, + .stepsize = 166667, + .initdata = tua603x_agc112, + .sleepdata = (u8[]){ 4, 0x9c, 0x60, 0x85, 0x54 }, + }, }; EXPORT_SYMBOL(tuners); diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index bcc32fa92a8..3b0b84c2e45 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -242,7 +242,7 @@ hauppauge_tuner[] = { TUNER_ABSENT, "TCL M2523_3DBH_E"}, { TUNER_ABSENT, "TCL M2523_3DIH_E"}, { TUNER_ABSENT, "TCL MFPE05_2_U"}, - { TUNER_PHILIPS_FMD1216ME_MK3, "Philips FMD1216MEX"}, + { TUNER_PHILIPS_FMD1216MEX_MK3, "Philips FMD1216MEX"}, { TUNER_ABSENT, "Philips FRH2036B"}, { TUNER_ABSENT, "Panasonic ENGF75_01GF"}, { TUNER_ABSENT, "MaxLinear MXL5005"}, diff --git a/include/media/tuner.h b/include/media/tuner.h index 67c1f514d0e..7d4e2db7807 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -123,6 +123,7 @@ #define TUNER_TEA5761 75 /* Only FM Radio Tuner */ #define TUNER_XC5000 76 /* Xceive Silicon Tuner */ #define TUNER_TCL_MF02GIP_5N 77 /* TCL MF02GIP_5N */ +#define TUNER_PHILIPS_FMD1216MEX_MK3 78 /* tv card specific */ #define TDA9887_PRESENT (1<<0) -- cgit v1.2.3-70-g09d2 From eb86be5424d4c08e686d5e578b72a26c516ae58a Mon Sep 17 00:00:00 2001 From: Harrison Metzger Date: Thu, 14 Aug 2008 11:29:32 -0500 Subject: USB: Added driver for a Delcom USB 7-segment LED Display Added basic support for a Delcom USB 7-segment LED Display Signed-off by: Harrison Metzger Signed-off-by: Greg Kroah-Hartman --- .../ABI/testing/sysfs-bus-usb-devices-usbsevseg | 43 +++ Documentation/usb/misc_usbsevseg.txt | 46 +++ drivers/usb/misc/Kconfig | 9 + drivers/usb/misc/Makefile | 1 + drivers/usb/misc/usbsevseg.c | 394 +++++++++++++++++++++ 5 files changed, 493 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg create mode 100644 Documentation/usb/misc_usbsevseg.txt create mode 100644 drivers/usb/misc/usbsevseg.c (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg b/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg new file mode 100644 index 00000000000..cb830df8777 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg @@ -0,0 +1,43 @@ +Where: /sys/bus/usb/.../powered +Date: August 2008 +Kernel Version: 2.6.26 +Contact: Harrison Metzger +Description: Controls whether the device's display will powered. + A value of 0 is off and a non-zero value is on. + +Where: /sys/bus/usb/.../mode_msb +Where: /sys/bus/usb/.../mode_lsb +Date: August 2008 +Kernel Version: 2.6.26 +Contact: Harrison Metzger +Description: Controls the devices display mode. + For a 6 character display the values are + MSB 0x06; LSB 0x3F, and + for an 8 character display the values are + MSB 0x08; LSB 0xFF. + +Where: /sys/bus/usb/.../textmode +Date: August 2008 +Kernel Version: 2.6.26 +Contact: Harrison Metzger +Description: Controls the way the device interprets its text buffer. + raw: each character controls its segment manually + hex: each character is between 0-15 + ascii: each character is between '0'-'9' and 'A'-'F'. + +Where: /sys/bus/usb/.../text +Date: August 2008 +Kernel Version: 2.6.26 +Contact: Harrison Metzger +Description: The text (or data) for the device to display + +Where: /sys/bus/usb/.../decimals +Date: August 2008 +Kernel Version: 2.6.26 +Contact: Harrison Metzger +Description: Controls the decimal places on the device. + To set the nth decimal place, give this field + the value of 10 ** n. Assume this field has + the value k and has 1 or more decimal places set, + to set the mth place (where m is not already set), + change this fields value to k + 10 ** m. \ No newline at end of file diff --git a/Documentation/usb/misc_usbsevseg.txt b/Documentation/usb/misc_usbsevseg.txt new file mode 100644 index 00000000000..0f6be4f9930 --- /dev/null +++ b/Documentation/usb/misc_usbsevseg.txt @@ -0,0 +1,46 @@ +USB 7-Segment Numeric Display +Manufactured by Delcom Engineering + +Device Information +------------------ +USB VENDOR_ID 0x0fc5 +USB PRODUCT_ID 0x1227 +Both the 6 character and 8 character displays have PRODUCT_ID, +and according to Delcom Engineering no queryable information +can be obtained from the device to tell them apart. + +Device Modes +------------ +By default, the driver assumes the display is only 6 characters +The mode for 6 characters is: + MSB 0x06; LSB 0x3f +For the 8 character display: + MSB 0x08; LSB 0xff +The device can accept "text" either in raw, hex, or ascii textmode. +raw controls each segment manually, +hex expects a value between 0-15 per character, +ascii expects a value between '0'-'9' and 'A'-'F'. +The default is ascii. + +Device Operation +---------------- +1. Turn on the device: + echo 1 > /sys/bus/usb/.../powered +2. Set the device's mode: + echo $mode_msb > /sys/bus/usb/.../mode_msb + echo $mode_lsb > /sys/bus/usb/.../mode_lsb +3. Set the textmode: + echo $textmode > /sys/bus/usb/.../textmode +4. set the text (for example): + echo "123ABC" > /sys/bus/usb/.../text (ascii) + echo "A1B2" > /sys/bus/usb/.../text (ascii) + echo -ne "\x01\x02\x03" > /sys/bus/usb/.../text (hex) +5. Set the decimal places. + The device has either 6 or 8 decimal points. + to set the nth decimal place calculate 10 ** n + and echo it in to /sys/bus/usb/.../decimals + To set multiple decimals points sum up each power. + For example, to set the 0th and 3rd decimal place + echo 1001 > /sys/bus/usb/.../decimals + + diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 4ea50e0abcb..25e1157ab17 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -42,6 +42,15 @@ config USB_ADUTUX To compile this driver as a module, choose M here. The module will be called adutux. +config USB_SEVSEG + tristate "USB 7-Segment LED Display" + depends on USB + help + Say Y here if you have a USB 7-Segment Display by Delcom + + To compile this driver as a module, choose M here: the + module will be called usbsevseg. + config USB_RIO500 tristate "USB Diamond Rio500 support" depends on USB diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 45b4e12afb0..39ce4a16b3d 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_USB_RIO500) += rio500.o obj-$(CONFIG_USB_TEST) += usbtest.o obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o obj-$(CONFIG_USB_USS720) += uss720.o +obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c new file mode 100644 index 00000000000..28a6a3a0953 --- /dev/null +++ b/drivers/usb/misc/usbsevseg.c @@ -0,0 +1,394 @@ +/* + * USB 7 Segment Driver + * + * Copyright (C) 2008 Harrison Metzger + * Based on usbled.c by Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include +#include +#include +#include +#include +#include +#include + + +#define DRIVER_AUTHOR "Harrison Metzger " +#define DRIVER_DESC "USB 7 Segment Driver" + +#define VENDOR_ID 0x0fc5 +#define PRODUCT_ID 0x1227 +#define MAXLEN 6 + +/* table of devices that work with this driver */ +static struct usb_device_id id_table[] = { + { USB_DEVICE(VENDOR_ID, PRODUCT_ID) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* the different text display modes the device is capable of */ +static char *display_textmodes[] = {"raw", "hex", "ascii", NULL}; + +struct usb_sevsegdev { + struct usb_device *udev; + + u8 powered; + u8 mode_msb; + u8 mode_lsb; + u8 decimals[MAXLEN]; + u8 textmode; + u8 text[MAXLEN]; + u16 textlength; +}; + +/* sysfs_streq can't replace this completely + * If the device was in hex mode, and the user wanted a 0, + * if str commands are used, we would assume the end of string + * so mem commands are used. + */ +inline size_t my_memlen(const char *buf, size_t count) +{ + if (count > 0 && buf[count-1] == '\n') + return count - 1; + else + return count; +} + +static void update_display_powered(struct usb_sevsegdev *mydev) +{ + int rc; + + rc = usb_control_msg(mydev->udev, + usb_sndctrlpipe(mydev->udev, 0), + 0x12, + 0x48, + (80 * 0x100) + 10, /* (power mode) */ + (0x00 * 0x100) + (mydev->powered ? 1 : 0), + NULL, + 0, + 2000); + if (rc < 0) + dev_dbg(&mydev->udev->dev, "power retval = %d\n", rc); +} + +static void update_display_mode(struct usb_sevsegdev *mydev) +{ + int rc; + + rc = usb_control_msg(mydev->udev, + usb_sndctrlpipe(mydev->udev, 0), + 0x12, + 0x48, + (82 * 0x100) + 10, /* (set mode) */ + (mydev->mode_msb * 0x100) + mydev->mode_lsb, + NULL, + 0, + 2000); + + if (rc < 0) + dev_dbg(&mydev->udev->dev, "mode retval = %d\n", rc); +} + +static void update_display_visual(struct usb_sevsegdev *mydev) +{ + int rc; + int i; + unsigned char *buffer; + u8 decimals = 0; + + buffer = kzalloc(MAXLEN, GFP_KERNEL); + if (!buffer) { + dev_err(&mydev->udev->dev, "out of memory\n"); + return; + } + + /* The device is right to left, where as you write left to right */ + for (i = 0; i < mydev->textlength; i++) + buffer[i] = mydev->text[mydev->textlength-1-i]; + + rc = usb_control_msg(mydev->udev, + usb_sndctrlpipe(mydev->udev, 0), + 0x12, + 0x48, + (85 * 0x100) + 10, /* (write text) */ + (0 * 0x100) + mydev->textmode, /* mode */ + buffer, + mydev->textlength, + 2000); + + if (rc < 0) + dev_dbg(&mydev->udev->dev, "write retval = %d\n", rc); + + kfree(buffer); + + /* The device is right to left, where as you write left to right */ + for (i = 0; i < sizeof(mydev->decimals); i++) + decimals |= mydev->decimals[i] << i; + + rc = usb_control_msg(mydev->udev, + usb_sndctrlpipe(mydev->udev, 0), + 0x12, + 0x48, + (86 * 0x100) + 10, /* (set decimal) */ + (0 * 0x100) + decimals, /* decimals */ + NULL, + 0, + 2000); + + if (rc < 0) + dev_dbg(&mydev->udev->dev, "decimal retval = %d\n", rc); +} + +#define MYDEV_ATTR_SIMPLE_UNSIGNED(name, update_fcn) \ +static ssize_t show_attr_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usb_sevsegdev *mydev = usb_get_intfdata(intf); \ + \ + return sprintf(buf, "%u\n", mydev->name); \ +} \ + \ +static ssize_t set_attr_##name(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usb_sevsegdev *mydev = usb_get_intfdata(intf); \ + \ + mydev->name = simple_strtoul(buf, NULL, 10); \ + update_fcn(mydev); \ + \ + return count; \ +} \ +static DEVICE_ATTR(name, S_IWUGO | S_IRUGO, show_attr_##name, set_attr_##name); + +static ssize_t show_attr_text(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_sevsegdev *mydev = usb_get_intfdata(intf); + + return snprintf(buf, mydev->textlength, "%s\n", mydev->text); +} + +static ssize_t set_attr_text(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_sevsegdev *mydev = usb_get_intfdata(intf); + size_t end = my_memlen(buf, count); + + if (end > sizeof(mydev->text)) + return -EINVAL; + + memset(mydev->text, 0, sizeof(mydev->text)); + mydev->textlength = end; + + if (end > 0) + memcpy(mydev->text, buf, end); + + update_display_visual(mydev); + return count; +} + +static DEVICE_ATTR(text, S_IWUGO | S_IRUGO, show_attr_text, set_attr_text); + +static ssize_t show_attr_decimals(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_sevsegdev *mydev = usb_get_intfdata(intf); + int i; + int pos; + + for (i = 0; i < sizeof(mydev->decimals); i++) { + pos = sizeof(mydev->decimals) - 1 - i; + if (mydev->decimals[i] == 0) + buf[pos] = '0'; + else if (mydev->decimals[i] == 1) + buf[pos] = '1'; + else + buf[pos] = 'x'; + } + + buf[sizeof(mydev->decimals)] = '\n'; + return sizeof(mydev->decimals) + 1; +} + +static ssize_t set_attr_decimals(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_sevsegdev *mydev = usb_get_intfdata(intf); + size_t end = my_memlen(buf, count); + int i; + + if (end > sizeof(mydev->decimals)) + return -EINVAL; + + for (i = 0; i < end; i++) + if (buf[i] != '0' && buf[i] != '1') + return -EINVAL; + + memset(mydev->decimals, 0, sizeof(mydev->decimals)); + for (i = 0; i < end; i++) + if (buf[i] == '1') + mydev->decimals[end-1-i] = 1; + + update_display_visual(mydev); + + return count; +} + +static DEVICE_ATTR(decimals, S_IWUGO | S_IRUGO, + show_attr_decimals, set_attr_decimals); + +static ssize_t show_attr_textmode(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_sevsegdev *mydev = usb_get_intfdata(intf); + int i; + + buf[0] = 0; + + for (i = 0; display_textmodes[i]; i++) { + if (mydev->textmode == i) { + strcat(buf, " ["); + strcat(buf, display_textmodes[i]); + strcat(buf, "] "); + } else { + strcat(buf, " "); + strcat(buf, display_textmodes[i]); + strcat(buf, " "); + } + } + strcat(buf, "\n"); + + + return strlen(buf); +} + +static ssize_t set_attr_textmode(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_sevsegdev *mydev = usb_get_intfdata(intf); + int i; + + for (i = 0; display_textmodes[i]; i++) { + if (sysfs_streq(display_textmodes[i], buf)) { + mydev->textmode = i; + update_display_visual(mydev); + return count; + } + } + + return -EINVAL; +} + +static DEVICE_ATTR(textmode, S_IWUGO | S_IRUGO, + show_attr_textmode, set_attr_textmode); + + +MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered); +MYDEV_ATTR_SIMPLE_UNSIGNED(mode_msb, update_display_mode); +MYDEV_ATTR_SIMPLE_UNSIGNED(mode_lsb, update_display_mode); + +static struct attribute *dev_attrs[] = { + &dev_attr_powered.attr, + &dev_attr_text.attr, + &dev_attr_textmode.attr, + &dev_attr_decimals.attr, + &dev_attr_mode_msb.attr, + &dev_attr_mode_lsb.attr, + NULL +}; + +static struct attribute_group dev_attr_grp = { + .attrs = dev_attrs, +}; + +static int sevseg_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_sevsegdev *mydev = NULL; + int rc = -ENOMEM; + + mydev = kzalloc(sizeof(struct usb_sevsegdev), GFP_KERNEL); + if (mydev == NULL) { + dev_err(&interface->dev, "Out of memory\n"); + goto error_mem; + } + + mydev->udev = usb_get_dev(udev); + usb_set_intfdata(interface, mydev); + + /*set defaults */ + mydev->textmode = 0x02; /* ascii mode */ + mydev->mode_msb = 0x06; /* 6 characters */ + mydev->mode_lsb = 0x3f; /* scanmode for 6 chars */ + + rc = sysfs_create_group(&interface->dev.kobj, &dev_attr_grp); + if (rc) + goto error; + + dev_info(&interface->dev, "USB 7 Segment device now attached\n"); + return 0; + +error: + usb_set_intfdata(interface, NULL); + usb_put_dev(mydev->udev); + kfree(mydev); +error_mem: + return rc; +} + +static void sevseg_disconnect(struct usb_interface *interface) +{ + struct usb_sevsegdev *mydev; + + mydev = usb_get_intfdata(interface); + sysfs_remove_group(&interface->dev.kobj, &dev_attr_grp); + usb_set_intfdata(interface, NULL); + usb_put_dev(mydev->udev); + kfree(mydev); + dev_info(&interface->dev, "USB 7 Segment now disconnected\n"); +} + +static struct usb_driver sevseg_driver = { + .name = "usbsevseg", + .probe = sevseg_probe, + .disconnect = sevseg_disconnect, + .id_table = id_table, +}; + +static int __init usb_sevseg_init(void) +{ + int rc = 0; + + rc = usb_register(&sevseg_driver); + if (rc) + err("usb_register failed. Error number %d", rc); + return rc; +} + +static void __exit usb_sevseg_exit(void) +{ + usb_deregister(&sevseg_driver); +} + +module_init(usb_sevseg_init); +module_exit(usb_sevseg_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 5b775f672cc993ba9dba5626811ab1f2ac42883b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 26 Aug 2008 16:22:06 -0700 Subject: USB: add USB test and measurement class driver This driver was originaly written by Stefan Kopp, but massively reworked by Greg for submission. Thanks to Felipe Balbi for lots of work in cleaning up this driver. Thanks to Oliver Neukum for reviewing previous versions and pointing out problems. Cc: Stefan Kopp Cc: Marcel Janssen Cc: Felipe Balbi Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/stable/sysfs-driver-usb-usbtmc | 62 ++ Documentation/devices.txt | 3 + Documentation/ioctl-number.txt | 2 + drivers/usb/class/Kconfig | 10 + drivers/usb/class/Makefile | 1 + drivers/usb/class/usbtmc.c | 1087 ++++++++++++++++++++++ include/linux/usb/Kbuild | 2 +- include/linux/usb/tmc.h | 43 + 8 files changed, 1209 insertions(+), 1 deletion(-) create mode 100644 Documentation/ABI/stable/sysfs-driver-usb-usbtmc create mode 100644 drivers/usb/class/usbtmc.c create mode 100644 include/linux/usb/tmc.h (limited to 'Documentation') diff --git a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc new file mode 100644 index 00000000000..9a75fb22187 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc @@ -0,0 +1,62 @@ +What: /sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities +What: /sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities +Date: August 2008 +Contact: Greg Kroah-Hartman +Description: + These files show the various USB TMC capabilities as described + by the device itself. The full description of the bitfields + can be found in the USB TMC documents from the USB-IF entitled + "Universal Serial Bus Test and Measurement Class Specification + (USBTMC) Revision 1.0" section 4.2.1.8. + + The files are read only. + + +What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities +What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities +Date: August 2008 +Contact: Greg Kroah-Hartman +Description: + These files show the various USB TMC capabilities as described + by the device itself. The full description of the bitfields + can be found in the USB TMC documents from the USB-IF entitled + "Universal Serial Bus Test and Measurement Class, Subclass + USB488 Specification (USBTMC-USB488) Revision 1.0" section + 4.2.2. + + The files are read only. + + +What: /sys/bus/usb/drivers/usbtmc/devices/*/TermChar +Date: August 2008 +Contact: Greg Kroah-Hartman +Description: + This file is the TermChar value to be sent to the USB TMC + device as described by the document, "Universal Serial Bus Test + and Measurement Class Specification + (USBTMC) Revision 1.0" as published by the USB-IF. + + Note that the TermCharEnabled file determines if this value is + sent to the device or not. + + +What: /sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled +Date: August 2008 +Contact: Greg Kroah-Hartman +Description: + This file determines if the TermChar is to be sent to the + device on every transaction or not. For more details about + this, please see the document, "Universal Serial Bus Test and + Measurement Class Specification (USBTMC) Revision 1.0" as + published by the USB-IF. + + +What: /sys/bus/usb/drivers/usbtmc/devices/*/auto_abort +Date: August 2008 +Contact: Greg Kroah-Hartman +Description: + This file determines if the the transaction of the USB TMC + device is to be automatically aborted if there is any error. + For more details about this, please see the document, + "Universal Serial Bus Test and Measurement Class Specification + (USBTMC) Revision 1.0" as published by the USB-IF. diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 05c80645e4e..2be08240ee8 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -2571,6 +2571,9 @@ Your cooperation is appreciated. 160 = /dev/usb/legousbtower0 1st USB Legotower device ... 175 = /dev/usb/legousbtower15 16th USB Legotower device + 176 = /dev/usb/usbtmc1 First USB TMC device + ... + 192 = /dev/usb/usbtmc16 16th USB TMC device 240 = /dev/usb/dabusb0 First daubusb device ... 243 = /dev/usb/dabusb3 Fourth dabusb device diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt index 1c6b545635a..f8deb85eef6 100644 --- a/Documentation/ioctl-number.txt +++ b/Documentation/ioctl-number.txt @@ -110,6 +110,8 @@ Code Seq# Include File Comments 'W' 00-1F linux/wanrouter.h conflict! 'X' all linux/xfs_fs.h 'Y' all linux/cyclades.h +'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices + 'a' all ATM on linux 'b' 00-FF bit3 vme host bridge diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index 66f17ed88cb..2519e320098 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -40,3 +40,13 @@ config USB_WDM To compile this driver as a module, choose M here: the module will be called cdc-wdm. +config USB_TMC + tristate "USB Test and Measurement Class support" + depends on USB + help + Say Y here if you want to connect a USB device that follows + the USB.org specification for USB Test and Measurement devices + to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called usbtmc. diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile index 535d59a3060..32e85277b5c 100644 --- a/drivers/usb/class/Makefile +++ b/drivers/usb/class/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_USB_ACM) += cdc-acm.o obj-$(CONFIG_USB_PRINTER) += usblp.o obj-$(CONFIG_USB_WDM) += cdc-wdm.o +obj-$(CONFIG_USB_TMC) += usbtmc.o diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c new file mode 100644 index 00000000000..543811f6e6e --- /dev/null +++ b/drivers/usb/class/usbtmc.c @@ -0,0 +1,1087 @@ +/** + * drivers/usb/class/usbtmc.c - USB Test & Measurment class driver + * + * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany + * Copyright (C) 2008 Novell, Inc. + * Copyright (C) 2008 Greg Kroah-Hartman + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * The GNU General Public License is available at + * http://www.gnu.org/copyleft/gpl.html. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +#define USBTMC_MINOR_BASE 176 + +/* + * Size of driver internal IO buffer. Must be multiple of 4 and at least as + * large as wMaxPacketSize (which is usually 512 bytes). + */ +#define USBTMC_SIZE_IOBUFFER 2048 + +/* Default USB timeout (in milliseconds) */ +#define USBTMC_TIMEOUT 10 + +/* + * Maximum number of read cycles to empty bulk in endpoint during CLEAR and + * ABORT_BULK_IN requests. Ends the loop if (for whatever reason) a short + * packet is never read. + */ +#define USBTMC_MAX_READS_TO_CLEAR_BULK_IN 100 + +static struct usb_device_id usbtmc_devices[] = { + { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), }, + { 0, } /* terminating entry */ +}; + +/* + * This structure is the capabilities for the device + * See section 4.2.1.8 of the USBTMC specification for details. + */ +struct usbtmc_dev_capabilities { + __u8 interface_capabilities; + __u8 device_capabilities; + __u8 usb488_interface_capabilities; + __u8 usb488_device_capabilities; +}; + +/* This structure holds private data for each USBTMC device. One copy is + * allocated for each USBTMC device in the driver's probe function. + */ +struct usbtmc_device_data { + const struct usb_device_id *id; + struct usb_device *usb_dev; + struct usb_interface *intf; + + unsigned int bulk_in; + unsigned int bulk_out; + + u8 bTag; + u8 bTag_last_write; /* needed for abort */ + u8 bTag_last_read; /* needed for abort */ + + /* attributes from the USB TMC spec for this device */ + u8 TermChar; + bool TermCharEnabled; + bool auto_abort; + + struct usbtmc_dev_capabilities capabilities; + struct kref kref; + struct mutex io_mutex; /* only one i/o function running at a time */ +}; +#define to_usbtmc_data(d) container_of(d, struct usbtmc_device_data, kref) + +/* Forward declarations */ +static struct usb_driver usbtmc_driver; + +static void usbtmc_delete(struct kref *kref) +{ + struct usbtmc_device_data *data = to_usbtmc_data(kref); + + usb_put_dev(data->usb_dev); + kfree(data); +} + +static int usbtmc_open(struct inode *inode, struct file *filp) +{ + struct usb_interface *intf; + struct usbtmc_device_data *data; + int retval = -ENODEV; + + intf = usb_find_interface(&usbtmc_driver, iminor(inode)); + if (!intf) { + printk(KERN_ERR KBUILD_MODNAME + ": can not find device for minor %d", iminor(inode)); + goto exit; + } + + data = usb_get_intfdata(intf); + kref_get(&data->kref); + + /* Store pointer in file structure's private data field */ + filp->private_data = data; + +exit: + return retval; +} + +static int usbtmc_release(struct inode *inode, struct file *file) +{ + struct usbtmc_device_data *data = file->private_data; + + kref_put(&data->kref, usbtmc_delete); + return 0; +} + +static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data) +{ + char *buffer; + struct device *dev; + int rv; + int n; + int actual; + struct usb_host_interface *current_setting; + int max_size; + + dev = &data->intf->dev; + buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_INITIATE_ABORT_BULK_IN, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, + data->bTag_last_read, data->bulk_in, + buffer, 2, USBTMC_TIMEOUT); + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]); + + if (buffer[0] == USBTMC_STATUS_FAILED) { + rv = 0; + goto exit; + } + + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "INITIATE_ABORT_BULK_IN returned %x\n", + buffer[0]); + rv = -EPERM; + goto exit; + } + + max_size = 0; + current_setting = data->intf->cur_altsetting; + for (n = 0; n < current_setting->desc.bNumEndpoints; n++) + if (current_setting->endpoint[n].desc.bEndpointAddress == + data->bulk_in) + max_size = le16_to_cpu(current_setting->endpoint[n]. + desc.wMaxPacketSize); + + if (max_size == 0) { + dev_err(dev, "Couldn't get wMaxPacketSize\n"); + rv = -EPERM; + goto exit; + } + + dev_dbg(&data->intf->dev, "wMaxPacketSize is %d\n", max_size); + + n = 0; + + do { + dev_dbg(dev, "Reading from bulk in EP\n"); + + rv = usb_bulk_msg(data->usb_dev, + usb_rcvbulkpipe(data->usb_dev, + data->bulk_in), + buffer, USBTMC_SIZE_IOBUFFER, + &actual, USBTMC_TIMEOUT); + + n++; + + if (rv < 0) { + dev_err(dev, "usb_bulk_msg returned %d\n", rv); + goto exit; + } + } while ((actual == max_size) && + (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)); + + if (actual == max_size) { + dev_err(dev, "Couldn't clear device buffer within %d cycles\n", + USBTMC_MAX_READS_TO_CLEAR_BULK_IN); + rv = -EPERM; + goto exit; + } + + n = 0; + +usbtmc_abort_bulk_in_status: + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, + 0, data->bulk_in, buffer, 0x08, + USBTMC_TIMEOUT); + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]); + + if (buffer[0] == USBTMC_STATUS_SUCCESS) { + rv = 0; + goto exit; + } + + if (buffer[0] != USBTMC_STATUS_PENDING) { + dev_err(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]); + rv = -EPERM; + goto exit; + } + + if (buffer[1] == 1) + do { + dev_dbg(dev, "Reading from bulk in EP\n"); + + rv = usb_bulk_msg(data->usb_dev, + usb_rcvbulkpipe(data->usb_dev, + data->bulk_in), + buffer, USBTMC_SIZE_IOBUFFER, + &actual, USBTMC_TIMEOUT); + + n++; + + if (rv < 0) { + dev_err(dev, "usb_bulk_msg returned %d\n", rv); + goto exit; + } + } while ((actual = max_size) && + (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)); + + if (actual == max_size) { + dev_err(dev, "Couldn't clear device buffer within %d cycles\n", + USBTMC_MAX_READS_TO_CLEAR_BULK_IN); + rv = -EPERM; + goto exit; + } + + goto usbtmc_abort_bulk_in_status; + +exit: + kfree(buffer); + return rv; + +} + +static int usbtmc_ioctl_abort_bulk_out(struct usbtmc_device_data *data) +{ + struct device *dev; + u8 *buffer; + int rv; + int n; + + dev = &data->intf->dev; + + buffer = kmalloc(8, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, + data->bTag_last_write, data->bulk_out, + buffer, 2, USBTMC_TIMEOUT); + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "INITIATE_ABORT_BULK_OUT returned %x\n", buffer[0]); + + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "INITIATE_ABORT_BULK_OUT returned %x\n", + buffer[0]); + rv = -EPERM; + goto exit; + } + + n = 0; + +usbtmc_abort_bulk_out_check_status: + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, + 0, data->bulk_out, buffer, 0x08, + USBTMC_TIMEOUT); + n++; + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "CHECK_ABORT_BULK_OUT returned %x\n", buffer[0]); + + if (buffer[0] == USBTMC_STATUS_SUCCESS) + goto usbtmc_abort_bulk_out_clear_halt; + + if ((buffer[0] == USBTMC_STATUS_PENDING) && + (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)) + goto usbtmc_abort_bulk_out_check_status; + + rv = -EPERM; + goto exit; + +usbtmc_abort_bulk_out_clear_halt: + rv = usb_control_msg(data->usb_dev, + usb_sndctrlpipe(data->usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_DIR_OUT | USB_TYPE_STANDARD | + USB_RECIP_ENDPOINT, + USB_ENDPOINT_HALT, data->bulk_out, buffer, + 0, USBTMC_TIMEOUT); + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + rv = 0; + +exit: + kfree(buffer); + return rv; +} + +static ssize_t usbtmc_read(struct file *filp, char __user *buf, + size_t count, loff_t *f_pos) +{ + struct usbtmc_device_data *data; + struct device *dev; + unsigned long int n_characters; + u8 *buffer; + int actual; + int done; + int remaining; + int retval; + int this_part; + + /* Get pointer to private data structure */ + data = filp->private_data; + dev = &data->intf->dev; + + buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + mutex_lock(&data->io_mutex); + + remaining = count; + done = 0; + + while (remaining > 0) { + if (remaining > USBTMC_SIZE_IOBUFFER - 12 - 3) + this_part = USBTMC_SIZE_IOBUFFER - 12 - 3; + else + this_part = remaining; + + /* Setup IO buffer for DEV_DEP_MSG_IN message + * Refer to class specs for details + */ + buffer[0] = 2; + buffer[1] = data->bTag; + buffer[2] = ~(data->bTag); + buffer[3] = 0; /* Reserved */ + buffer[4] = (this_part - 12 - 3) & 255; + buffer[5] = ((this_part - 12 - 3) >> 8) & 255; + buffer[6] = ((this_part - 12 - 3) >> 16) & 255; + buffer[7] = ((this_part - 12 - 3) >> 24) & 255; + buffer[8] = data->TermCharEnabled * 2; + /* Use term character? */ + buffer[9] = data->TermChar; + buffer[10] = 0; /* Reserved */ + buffer[11] = 0; /* Reserved */ + + /* Send bulk URB */ + retval = usb_bulk_msg(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, + data->bulk_out), + buffer, 12, &actual, USBTMC_TIMEOUT); + + /* Store bTag (in case we need to abort) */ + data->bTag_last_write = data->bTag; + + /* Increment bTag -- and increment again if zero */ + data->bTag++; + if (!data->bTag) + (data->bTag)++; + + if (retval < 0) { + dev_err(dev, "usb_bulk_msg returned %d\n", retval); + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_out(data); + goto exit; + } + + /* Send bulk URB */ + retval = usb_bulk_msg(data->usb_dev, + usb_rcvbulkpipe(data->usb_dev, + data->bulk_in), + buffer, USBTMC_SIZE_IOBUFFER, &actual, + USBTMC_TIMEOUT); + + /* Store bTag (in case we need to abort) */ + data->bTag_last_read = data->bTag; + + if (retval < 0) { + dev_err(dev, "Unable to read data, error %d\n", retval); + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_in(data); + goto exit; + } + + /* How many characters did the instrument send? */ + n_characters = buffer[4] + + (buffer[5] << 8) + + (buffer[6] << 16) + + (buffer[7] << 24); + + /* Copy buffer to user space */ + if (copy_to_user(buf + done, &buffer[12], n_characters)) { + /* There must have been an addressing problem */ + retval = -EFAULT; + goto exit; + } + + done += n_characters; + if (n_characters < USBTMC_SIZE_IOBUFFER) + remaining = 0; + } + + /* Update file position value */ + *f_pos = *f_pos + done; + retval = done; + +exit: + mutex_unlock(&data->io_mutex); + kfree(buffer); + return retval; +} + +static ssize_t usbtmc_write(struct file *filp, const char __user *buf, + size_t count, loff_t *f_pos) +{ + struct usbtmc_device_data *data; + u8 *buffer; + int retval; + int actual; + unsigned long int n_bytes; + int n; + int remaining; + int done; + int this_part; + + data = filp->private_data; + + buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + mutex_lock(&data->io_mutex); + + remaining = count; + done = 0; + + while (remaining > 0) { + if (remaining > USBTMC_SIZE_IOBUFFER - 12) { + this_part = USBTMC_SIZE_IOBUFFER - 12; + buffer[8] = 0; + } else { + this_part = remaining; + buffer[8] = 1; + } + + /* Setup IO buffer for DEV_DEP_MSG_OUT message */ + buffer[0] = 1; + buffer[1] = data->bTag; + buffer[2] = ~(data->bTag); + buffer[3] = 0; /* Reserved */ + buffer[4] = this_part & 255; + buffer[5] = (this_part >> 8) & 255; + buffer[6] = (this_part >> 16) & 255; + buffer[7] = (this_part >> 24) & 255; + /* buffer[8] is set above... */ + buffer[9] = 0; /* Reserved */ + buffer[10] = 0; /* Reserved */ + buffer[11] = 0; /* Reserved */ + + if (copy_from_user(&buffer[12], buf + done, this_part)) { + retval = -EFAULT; + goto exit; + } + + n_bytes = 12 + this_part; + if (this_part % 4) + n_bytes += 4 - this_part % 4; + for (n = 12 + this_part; n < n_bytes; n++) + buffer[n] = 0; + + retval = usb_bulk_msg(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, + data->bulk_out), + buffer, n_bytes, &actual, USBTMC_TIMEOUT); + + data->bTag_last_write = data->bTag; + data->bTag++; + + if (!data->bTag) + data->bTag++; + + if (retval < 0) { + dev_err(&data->intf->dev, + "Unable to send data, error %d\n", retval); + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_out(data); + goto exit; + } + + remaining -= this_part; + done += this_part; + } + + retval = count; +exit: + mutex_unlock(&data->io_mutex); + kfree(buffer); + return retval; +} + +static int usbtmc_ioctl_clear(struct usbtmc_device_data *data) +{ + struct usb_host_interface *current_setting; + struct usb_endpoint_descriptor *desc; + struct device *dev; + u8 *buffer; + int rv; + int n; + int actual; + int max_size; + + dev = &data->intf->dev; + + dev_dbg(dev, "Sending INITIATE_CLEAR request\n"); + + buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_INITIATE_CLEAR, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, 0, buffer, 1, USBTMC_TIMEOUT); + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "INITIATE_CLEAR returned %x\n", buffer[0]); + + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "INITIATE_CLEAR returned %x\n", buffer[0]); + rv = -EPERM; + goto exit; + } + + max_size = 0; + current_setting = data->intf->cur_altsetting; + for (n = 0; n < current_setting->desc.bNumEndpoints; n++) { + desc = ¤t_setting->endpoint[n].desc; + if (desc->bEndpointAddress == data->bulk_in) + max_size = le16_to_cpu(desc->wMaxPacketSize); + } + + if (max_size == 0) { + dev_err(dev, "Couldn't get wMaxPacketSize\n"); + rv = -EPERM; + goto exit; + } + + dev_dbg(dev, "wMaxPacketSize is %d\n", max_size); + + n = 0; + +usbtmc_clear_check_status: + + dev_dbg(dev, "Sending CHECK_CLEAR_STATUS request\n"); + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_CHECK_CLEAR_STATUS, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, 0, buffer, 2, USBTMC_TIMEOUT); + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "CHECK_CLEAR_STATUS returned %x\n", buffer[0]); + + if (buffer[0] == USBTMC_STATUS_SUCCESS) + goto usbtmc_clear_bulk_out_halt; + + if (buffer[0] != USBTMC_STATUS_PENDING) { + dev_err(dev, "CHECK_CLEAR_STATUS returned %x\n", buffer[0]); + rv = -EPERM; + goto exit; + } + + if (buffer[1] == 1) + do { + dev_dbg(dev, "Reading from bulk in EP\n"); + + rv = usb_bulk_msg(data->usb_dev, + usb_rcvbulkpipe(data->usb_dev, + data->bulk_in), + buffer, USBTMC_SIZE_IOBUFFER, + &actual, USBTMC_TIMEOUT); + n++; + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", + rv); + goto exit; + } + } while ((actual == max_size) && + (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)); + + if (actual == max_size) { + dev_err(dev, "Couldn't clear device buffer within %d cycles\n", + USBTMC_MAX_READS_TO_CLEAR_BULK_IN); + rv = -EPERM; + goto exit; + } + + goto usbtmc_clear_check_status; + +usbtmc_clear_bulk_out_halt: + + rv = usb_control_msg(data->usb_dev, + usb_sndctrlpipe(data->usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_DIR_OUT | USB_TYPE_STANDARD | + USB_RECIP_ENDPOINT, + USB_ENDPOINT_HALT, + data->bulk_out, buffer, 0, + USBTMC_TIMEOUT); + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + rv = 0; + +exit: + kfree(buffer); + return rv; +} + +static int usbtmc_ioctl_clear_out_halt(struct usbtmc_device_data *data) +{ + u8 *buffer; + int rv; + + buffer = kmalloc(2, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, + usb_sndctrlpipe(data->usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_DIR_OUT | USB_TYPE_STANDARD | + USB_RECIP_ENDPOINT, + USB_ENDPOINT_HALT, data->bulk_out, + buffer, 0, USBTMC_TIMEOUT); + + if (rv < 0) { + dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", + rv); + goto exit; + } + rv = 0; + +exit: + kfree(buffer); + return rv; +} + +static int usbtmc_ioctl_clear_in_halt(struct usbtmc_device_data *data) +{ + u8 *buffer; + int rv; + + buffer = kmalloc(2, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, usb_sndctrlpipe(data->usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_DIR_OUT | USB_TYPE_STANDARD | + USB_RECIP_ENDPOINT, + USB_ENDPOINT_HALT, data->bulk_in, buffer, 0, + USBTMC_TIMEOUT); + + if (rv < 0) { + dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", + rv); + goto exit; + } + rv = 0; + +exit: + kfree(buffer); + return rv; +} + +static int get_capabilities(struct usbtmc_device_data *data) +{ + struct device *dev = &data->usb_dev->dev; + char *buffer; + int rv; + + buffer = kmalloc(0x18, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_GET_CAPABILITIES, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, 0, buffer, 0x18, USBTMC_TIMEOUT); + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + return rv; + } + + dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]); + dev_dbg(dev, "Interface capabilities are %x\n", buffer[4]); + dev_dbg(dev, "Device capabilities are %x\n", buffer[5]); + dev_dbg(dev, "USB488 interface capabilities are %x\n", buffer[14]); + dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]); + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]); + return -EPERM; + } + + data->capabilities.interface_capabilities = buffer[4]; + data->capabilities.device_capabilities = buffer[5]; + data->capabilities.usb488_interface_capabilities = buffer[14]; + data->capabilities.usb488_device_capabilities = buffer[15]; + + kfree(buffer); + return 0; +} + +#define capability_attribute(name) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usbtmc_device_data *data = usb_get_intfdata(intf); \ + \ + return sprintf(buf, "%d\n", data->capabilities.name); \ +} \ +static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL) + +capability_attribute(interface_capabilities); +capability_attribute(device_capabilities); +capability_attribute(usb488_interface_capabilities); +capability_attribute(usb488_device_capabilities); + +static struct attribute *capability_attrs[] = { + &dev_attr_interface_capabilities.attr, + &dev_attr_device_capabilities.attr, + &dev_attr_usb488_interface_capabilities.attr, + &dev_attr_usb488_device_capabilities.attr, + NULL, +}; + +static struct attribute_group capability_attr_grp = { + .attrs = capability_attrs, +}; + +static ssize_t show_TermChar(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usbtmc_device_data *data = usb_get_intfdata(intf); + + return sprintf(buf, "%c\n", data->TermChar); +} + +static ssize_t store_TermChar(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usbtmc_device_data *data = usb_get_intfdata(intf); + + if (count < 1) + return -EINVAL; + data->TermChar = buf[0]; + return count; +} +static DEVICE_ATTR(TermChar, S_IRUGO, show_TermChar, store_TermChar); + +#define data_attribute(name) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usbtmc_device_data *data = usb_get_intfdata(intf); \ + \ + return sprintf(buf, "%d\n", data->name); \ +} \ +static ssize_t store_##name(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usbtmc_device_data *data = usb_get_intfdata(intf); \ + ssize_t result; \ + unsigned val; \ + \ + result = sscanf(buf, "%u\n", &val); \ + if (result != 1) \ + result = -EINVAL; \ + data->name = val; \ + if (result < 0) \ + return result; \ + else \ + return count; \ +} \ +static DEVICE_ATTR(name, S_IRUGO, show_##name, store_##name) + +data_attribute(TermCharEnabled); +data_attribute(auto_abort); + +static struct attribute *data_attrs[] = { + &dev_attr_TermChar.attr, + &dev_attr_TermCharEnabled.attr, + &dev_attr_auto_abort.attr, + NULL, +}; + +static struct attribute_group data_attr_grp = { + .attrs = data_attrs, +}; + +static int usbtmc_ioctl_indicator_pulse(struct usbtmc_device_data *data) +{ + struct device *dev; + u8 *buffer; + int rv; + + dev = &data->intf->dev; + + buffer = kmalloc(2, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_INDICATOR_PULSE, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, 0, buffer, 0x01, USBTMC_TIMEOUT); + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "INDICATOR_PULSE returned %x\n", buffer[0]); + + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "INDICATOR_PULSE returned %x\n", buffer[0]); + rv = -EPERM; + goto exit; + } + rv = 0; + +exit: + kfree(buffer); + return rv; +} + +static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct usbtmc_device_data *data; + int retval = -EBADRQC; + + data = file->private_data; + mutex_lock(&data->io_mutex); + + switch (cmd) { + case USBTMC_IOCTL_CLEAR_OUT_HALT: + retval = usbtmc_ioctl_clear_out_halt(data); + + case USBTMC_IOCTL_CLEAR_IN_HALT: + retval = usbtmc_ioctl_clear_in_halt(data); + + case USBTMC_IOCTL_INDICATOR_PULSE: + retval = usbtmc_ioctl_indicator_pulse(data); + + case USBTMC_IOCTL_CLEAR: + retval = usbtmc_ioctl_clear(data); + + case USBTMC_IOCTL_ABORT_BULK_OUT: + retval = usbtmc_ioctl_abort_bulk_out(data); + + case USBTMC_IOCTL_ABORT_BULK_IN: + retval = usbtmc_ioctl_abort_bulk_in(data); + } + + mutex_unlock(&data->io_mutex); + return retval; +} + +static struct file_operations fops = { + .owner = THIS_MODULE, + .read = usbtmc_read, + .write = usbtmc_write, + .open = usbtmc_open, + .release = usbtmc_release, + .unlocked_ioctl = usbtmc_ioctl, +}; + +static struct usb_class_driver usbtmc_class = { + .name = "usbtmc%d", + .fops = &fops, + .minor_base = USBTMC_MINOR_BASE, +}; + + +static int usbtmc_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usbtmc_device_data *data; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + int n; + int retcode; + + dev_dbg(&intf->dev, "%s called\n", __func__); + + data = kmalloc(sizeof(struct usbtmc_device_data), GFP_KERNEL); + if (!data) { + dev_err(&intf->dev, "Unable to allocate kernel memory\n"); + return -ENOMEM; + } + + data->intf = intf; + data->id = id; + data->usb_dev = usb_get_dev(interface_to_usbdev(intf)); + usb_set_intfdata(intf, data); + kref_init(&data->kref); + mutex_init(&data->io_mutex); + + /* Initialize USBTMC bTag and other fields */ + data->bTag = 1; + data->TermCharEnabled = 0; + data->TermChar = '\n'; + + /* USBTMC devices have only one setting, so use that */ + iface_desc = data->intf->cur_altsetting; + + /* Find bulk in endpoint */ + for (n = 0; n < iface_desc->desc.bNumEndpoints; n++) { + endpoint = &iface_desc->endpoint[n].desc; + + if (usb_endpoint_is_bulk_in(endpoint)) { + data->bulk_in = endpoint->bEndpointAddress; + dev_dbg(&intf->dev, "Found bulk in endpoint at %u\n", + data->bulk_in); + break; + } + } + + /* Find bulk out endpoint */ + for (n = 0; n < iface_desc->desc.bNumEndpoints; n++) { + endpoint = &iface_desc->endpoint[n].desc; + + if (usb_endpoint_is_bulk_out(endpoint)) { + data->bulk_out = endpoint->bEndpointAddress; + dev_dbg(&intf->dev, "Found Bulk out endpoint at %u\n", + data->bulk_out); + break; + } + } + + retcode = get_capabilities(data); + if (retcode) + dev_err(&intf->dev, "can't read capabilities\n"); + else + retcode = sysfs_create_group(&intf->dev.kobj, + &capability_attr_grp); + + retcode = sysfs_create_group(&intf->dev.kobj, &data_attr_grp); + + retcode = usb_register_dev(intf, &usbtmc_class); + if (retcode) { + dev_err(&intf->dev, "Not able to get a minor" + " (base %u, slice default): %d\n", USBTMC_MINOR_BASE, + retcode); + goto error_register; + } + dev_dbg(&intf->dev, "Using minor number %d\n", intf->minor); + + return 0; + +error_register: + sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp); + sysfs_remove_group(&intf->dev.kobj, &data_attr_grp); + kref_put(&data->kref, usbtmc_delete); + return retcode; +} + +static void usbtmc_disconnect(struct usb_interface *intf) +{ + struct usbtmc_device_data *data; + + dev_dbg(&intf->dev, "usbtmc_disconnect called\n"); + + data = usb_get_intfdata(intf); + usb_deregister_dev(intf, &usbtmc_class); + sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp); + sysfs_remove_group(&intf->dev.kobj, &data_attr_grp); + kref_put(&data->kref, usbtmc_delete); +} + +static struct usb_driver usbtmc_driver = { + .name = "usbtmc", + .id_table = usbtmc_devices, + .probe = usbtmc_probe, + .disconnect = usbtmc_disconnect +}; + +static int __init usbtmc_init(void) +{ + int retcode; + + retcode = usb_register(&usbtmc_driver); + if (retcode) + printk(KERN_ERR KBUILD_MODNAME": Unable to register driver\n"); + return retcode; +} +module_init(usbtmc_init); + +static void __exit usbtmc_exit(void) +{ + usb_deregister(&usbtmc_driver); +} +module_exit(usbtmc_exit); + +MODULE_LICENSE("GPL"); diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index 42e84fc315e..29fd73b0bff 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -4,4 +4,4 @@ header-y += ch9.h header-y += gadgetfs.h header-y += midi.h header-y += g_printer.h - +header-y += tmc.h diff --git a/include/linux/usb/tmc.h b/include/linux/usb/tmc.h new file mode 100644 index 00000000000..c045ae12556 --- /dev/null +++ b/include/linux/usb/tmc.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany + * Copyright (C) 2008 Novell, Inc. + * Copyright (C) 2008 Greg Kroah-Hartman + * + * This file holds USB constants defined by the USB Device Class + * Definition for Test and Measurement devices published by the USB-IF. + * + * It also has the ioctl definitions for the usbtmc kernel driver that + * userspace needs to know about. + */ + +#ifndef __LINUX_USB_TMC_H +#define __LINUX_USB_TMC_H + +/* USB TMC status values */ +#define USBTMC_STATUS_SUCCESS 0x01 +#define USBTMC_STATUS_PENDING 0x02 +#define USBTMC_STATUS_FAILED 0x80 +#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 +#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 +#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83 + +/* USB TMC requests values */ +#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1 +#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2 +#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3 +#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4 +#define USBTMC_REQUEST_INITIATE_CLEAR 5 +#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6 +#define USBTMC_REQUEST_GET_CAPABILITIES 7 +#define USBTMC_REQUEST_INDICATOR_PULSE 64 + +/* Request values for USBTMC driver's ioctl entry point */ +#define USBTMC_IOC_NR 91 +#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1) +#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2) +#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3) +#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4) +#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6) +#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7) + +#endif -- cgit v1.2.3-70-g09d2 From 3086775a4916b0fe128d924d83f4e7d7c39e4d0e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 18 Aug 2008 17:39:30 -0700 Subject: usb gadget: cdc obex glue The following patch introduces a new f_obex.c function driver. It allows userspace obex servers to use usb as transport layer for their messages. [ dbrownell@users.sourceforge.net: various fixes and cleanups ] Signed-off-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/gadget.tmpl | 3 + drivers/usb/gadget/Kconfig | 8 +- drivers/usb/gadget/f_obex.c | 446 ++++++++++++++++++++++++++++++++++++++ drivers/usb/gadget/serial.c | 14 ++ drivers/usb/gadget/u_serial.h | 1 + include/linux/usb/cdc.h | 9 + 6 files changed, 479 insertions(+), 2 deletions(-) create mode 100644 drivers/usb/gadget/f_obex.c (limited to 'Documentation') diff --git a/Documentation/DocBook/gadget.tmpl b/Documentation/DocBook/gadget.tmpl index ea3bc9565e6..6ef2f0073e5 100644 --- a/Documentation/DocBook/gadget.tmpl +++ b/Documentation/DocBook/gadget.tmpl @@ -557,6 +557,9 @@ Near-term plans include converting all of them, except for "gadgetfs". !Edrivers/usb/gadget/f_acm.c +!Edrivers/usb/gadget/f_ecm.c +!Edrivers/usb/gadget/f_subset.c +!Edrivers/usb/gadget/f_obex.c !Edrivers/usb/gadget/f_serial.c diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 5dda2dc708d..80a7c02dc95 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -576,19 +576,23 @@ config USB_FILE_STORAGE_TEST normal operation. config USB_G_SERIAL - tristate "Serial Gadget (with CDC ACM support)" + tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" help The Serial Gadget talks to the Linux-USB generic serial driver. This driver supports a CDC-ACM module option, which can be used to interoperate with MS-Windows hosts or with the Linux-USB "cdc-acm" driver. + This driver also supports a CDC-OBEX option. You will need a + user space OBEX server talking to /dev/ttyGS*, since the kernel + itself doesn't implement the OBEX protocol. + Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_serial". For more information, see Documentation/usb/gadget_serial.txt which includes instructions and a "driver info file" needed to - make MS-Windows work with this driver. + make MS-Windows work with CDC ACM. config USB_MIDI_GADGET tristate "MIDI Gadget (EXPERIMENTAL)" diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c new file mode 100644 index 00000000000..86241b2ca8f --- /dev/null +++ b/drivers/usb/gadget/f_obex.c @@ -0,0 +1,446 @@ +/* + * f_obex.c -- USB CDC OBEX function driver + * + * Copyright (C) 2008 Nokia Corporation + * Contact: Felipe Balbi + * + * Based on f_acm.c by Al Borchers and David Brownell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* #define VERBOSE_DEBUG */ + +#include +#include +#include + +#include "u_serial.h" +#include "gadget_chips.h" + + +/* + * This CDC OBEX function support just packages a TTY-ish byte stream. + * A user mode server will put it into "raw" mode and handle all the + * relevant protocol details ... this is just a kernel passthrough. + * + * REVISIT this driver shouldn't actually activate before that user mode + * server is ready to respond! When the "serial gadget" utility code + * adds open/close notifications, this driver should use them with new + * (TBS) composite gadget hooks that wrap usb_gadget_disconnect() and + * usb_gadget_connect() calls with refcounts ... disconnect() when we + * bind, then connect() when the user server code is ready to respond. + */ + +struct obex_ep_descs { + struct usb_endpoint_descriptor *obex_in; + struct usb_endpoint_descriptor *obex_out; +}; + +struct f_obex { + struct gserial port; + u8 ctrl_id; + u8 data_id; + u8 port_num; + + struct obex_ep_descs fs; + struct obex_ep_descs hs; +}; + +static inline struct f_obex *func_to_obex(struct usb_function *f) +{ + return container_of(f, struct f_obex, port.func); +} + +/*-------------------------------------------------------------------------*/ + +#define OBEX_CTRL_IDX 0 +#define OBEX_DATA_IDX 1 + +static struct usb_string obex_string_defs[] = { + [OBEX_CTRL_IDX].s = "CDC Object Exchange (OBEX)", + [OBEX_DATA_IDX].s = "CDC OBEX Data", + { }, /* end of list */ +}; + +static struct usb_gadget_strings obex_string_table = { + .language = 0x0409, /* en-US */ + .strings = obex_string_defs, +}; + +static struct usb_gadget_strings *obex_strings[] = { + &obex_string_table, + NULL, +}; + +/*-------------------------------------------------------------------------*/ + +static struct usb_interface_descriptor obex_control_intf __initdata = { + .bLength = sizeof(obex_control_intf), + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_OBEX, +}; + +static struct usb_interface_descriptor obex_data_nop_intf __initdata = { + .bLength = sizeof(obex_data_nop_intf), + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 1, + + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = USB_CLASS_CDC_DATA, +}; + +static struct usb_interface_descriptor obex_data_intf __initdata = { + .bLength = sizeof(obex_data_intf), + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 2, + + .bAlternateSetting = 1, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_CDC_DATA, +}; + +static struct usb_cdc_header_desc obex_cdc_header_desc __initdata = { + .bLength = sizeof(obex_cdc_header_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_HEADER_TYPE, + .bcdCDC = __constant_cpu_to_le16(0x0120), +}; + +static struct usb_cdc_union_desc obex_cdc_union_desc __initdata = { + .bLength = sizeof(obex_cdc_union_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_UNION_TYPE, + .bMasterInterface0 = 1, + .bSlaveInterface0 = 2, +}; + +static struct usb_cdc_obex_desc obex_desc __initdata = { + .bLength = sizeof(obex_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_OBEX_TYPE, + .bcdVersion = __constant_cpu_to_le16(0x0100), +}; + +/* High-Speed Support */ + +static struct usb_endpoint_descriptor obex_hs_ep_out_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16(512), +}; + +static struct usb_descriptor_header *hs_function[] __initdata = { + (struct usb_descriptor_header *) &obex_control_intf, + (struct usb_descriptor_header *) &obex_cdc_header_desc, + (struct usb_descriptor_header *) &obex_desc, + (struct usb_descriptor_header *) &obex_cdc_union_desc, + + (struct usb_descriptor_header *) &obex_data_nop_intf, + (struct usb_descriptor_header *) &obex_data_intf, + (struct usb_descriptor_header *) &obex_hs_ep_in_desc, + (struct usb_descriptor_header *) &obex_hs_ep_out_desc, + NULL, +}; + +/* Full-Speed Support */ + +static struct usb_endpoint_descriptor obex_fs_ep_in_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_endpoint_descriptor obex_fs_ep_out_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_descriptor_header *fs_function[] __initdata = { + (struct usb_descriptor_header *) &obex_control_intf, + (struct usb_descriptor_header *) &obex_cdc_header_desc, + (struct usb_descriptor_header *) &obex_desc, + (struct usb_descriptor_header *) &obex_cdc_union_desc, + + (struct usb_descriptor_header *) &obex_data_nop_intf, + (struct usb_descriptor_header *) &obex_data_intf, + (struct usb_descriptor_header *) &obex_fs_ep_in_desc, + (struct usb_descriptor_header *) &obex_fs_ep_out_desc, + NULL, +}; + +/*-------------------------------------------------------------------------*/ + +static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt) +{ + struct f_obex *obex = func_to_obex(f); + struct usb_composite_dev *cdev = f->config->cdev; + + if (intf == obex->ctrl_id) { + if (alt != 0) + goto fail; + /* NOP */ + DBG(cdev, "reset obex ttyGS%d control\n", obex->port_num); + + } else if (intf == obex->data_id) { + if (alt > 1) + goto fail; + + if (obex->port.in->driver_data) { + DBG(cdev, "reset obex ttyGS%d\n", obex->port_num); + gserial_disconnect(&obex->port); + } + + if (!obex->port.in_desc) { + DBG(cdev, "init obex ttyGS%d\n", obex->port_num); + obex->port.in_desc = ep_choose(cdev->gadget, + obex->hs.obex_in, obex->fs.obex_in); + obex->port.out_desc = ep_choose(cdev->gadget, + obex->hs.obex_out, obex->fs.obex_out); + } + + if (alt == 1) { + DBG(cdev, "activate obex ttyGS%d\n", obex->port_num); + gserial_connect(&obex->port, obex->port_num); + } + + } else + goto fail; + + return 0; + +fail: + return -EINVAL; +} + +static int obex_get_alt(struct usb_function *f, unsigned intf) +{ + struct f_obex *obex = func_to_obex(f); + + if (intf == obex->ctrl_id) + return 0; + + return obex->port.in->driver_data ? 1 : 0; +} + +static void obex_disable(struct usb_function *f) +{ + struct f_obex *obex = func_to_obex(f); + struct usb_composite_dev *cdev = f->config->cdev; + + DBG(cdev, "obex ttyGS%d disable\n", obex->port_num); + gserial_disconnect(&obex->port); +} + +/*-------------------------------------------------------------------------*/ + +static int __init +obex_bind(struct usb_configuration *c, struct usb_function *f) +{ + struct usb_composite_dev *cdev = c->cdev; + struct f_obex *obex = func_to_obex(f); + int status; + struct usb_ep *ep; + + /* allocate instance-specific interface IDs, and patch descriptors */ + + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + obex->ctrl_id = status; + + obex_control_intf.bInterfaceNumber = status; + obex_cdc_union_desc.bMasterInterface0 = status; + + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + obex->data_id = status; + + obex_data_nop_intf.bInterfaceNumber = status; + obex_data_intf.bInterfaceNumber = status; + obex_cdc_union_desc.bSlaveInterface0 = status; + + /* allocate instance-specific endpoints */ + + ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_in_desc); + if (!ep) + goto fail; + obex->port.in = ep; + ep->driver_data = cdev; /* claim */ + + ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_out_desc); + if (!ep) + goto fail; + obex->port.out = ep; + ep->driver_data = cdev; /* claim */ + + /* copy descriptors, and track endpoint copies */ + f->descriptors = usb_copy_descriptors(fs_function); + + obex->fs.obex_in = usb_find_endpoint(fs_function, + f->descriptors, &obex_fs_ep_in_desc); + obex->fs.obex_out = usb_find_endpoint(fs_function, + f->descriptors, &obex_fs_ep_out_desc); + + /* support all relevant hardware speeds... we expect that when + * hardware is dual speed, all bulk-capable endpoints work at + * both speeds + */ + if (gadget_is_dualspeed(c->cdev->gadget)) { + + obex_hs_ep_in_desc.bEndpointAddress = + obex_fs_ep_in_desc.bEndpointAddress; + obex_hs_ep_out_desc.bEndpointAddress = + obex_fs_ep_out_desc.bEndpointAddress; + + /* copy descriptors, and track endpoint copies */ + f->hs_descriptors = usb_copy_descriptors(hs_function); + + obex->hs.obex_in = usb_find_endpoint(hs_function, + f->descriptors, &obex_hs_ep_in_desc); + obex->hs.obex_out = usb_find_endpoint(hs_function, + f->descriptors, &obex_hs_ep_out_desc); + } + + DBG(cdev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n", + obex->port_num, + gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", + obex->port.in->name, obex->port.out->name); + + return 0; + +fail: + /* we might as well release our claims on endpoints */ + if (obex->port.out) + obex->port.out->driver_data = NULL; + if (obex->port.in) + obex->port.in->driver_data = NULL; + + ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status); + + return status; +} + +static void +obex_unbind(struct usb_configuration *c, struct usb_function *f) +{ + if (gadget_is_dualspeed(c->cdev->gadget)) + usb_free_descriptors(f->hs_descriptors); + usb_free_descriptors(f->descriptors); + kfree(func_to_obex(f)); +} + +/* Some controllers can't support CDC OBEX ... */ +static inline bool can_support_obex(struct usb_configuration *c) +{ + /* Since the first interface is a NOP, we can ignore the + * issue of multi-interface support on most controllers. + * + * Altsettings are mandatory, however... + */ + if (!gadget_supports_altsettings(c->cdev->gadget)) + return false; + + /* everything else is *probably* fine ... */ + return true; +} + +/** + * obex_bind_config - add a CDC OBEX function to a configuration + * @c: the configuration to support the CDC OBEX instance + * @port_num: /dev/ttyGS* port this interface will use + * Context: single threaded during gadget setup + * + * Returns zero on success, else negative errno. + * + * Caller must have called @gserial_setup() with enough ports to + * handle all the ones it binds. Caller is also responsible + * for calling @gserial_cleanup() before module unload. + */ +int __init obex_bind_config(struct usb_configuration *c, u8 port_num) +{ + struct f_obex *obex; + int status; + + if (!can_support_obex(c)) + return -EINVAL; + + /* maybe allocate device-global string IDs, and patch descriptors */ + if (obex_string_defs[OBEX_CTRL_IDX].id == 0) { + status = usb_string_id(c->cdev); + if (status < 0) + return status; + obex_string_defs[OBEX_CTRL_IDX].id = status; + + obex_control_intf.iInterface = status; + + status = usb_string_id(c->cdev); + if (status < 0) + return status; + obex_string_defs[OBEX_DATA_IDX].id = status; + + obex_data_nop_intf.iInterface = + obex_data_intf.iInterface = status; + } + + /* allocate and initialize one new instance */ + obex = kzalloc(sizeof *obex, GFP_KERNEL); + if (!obex) + return -ENOMEM; + + obex->port_num = port_num; + + obex->port.func.name = "obex"; + obex->port.func.strings = obex_strings; + /* descriptors are per-instance copies */ + obex->port.func.bind = obex_bind; + obex->port.func.unbind = obex_unbind; + obex->port.func.set_alt = obex_set_alt; + obex->port.func.get_alt = obex_get_alt; + obex->port.func.disable = obex_disable; + + status = usb_add_function(c, &obex->port.func); + if (status) + kfree(obex); + + return status; +} + +MODULE_AUTHOR("Felipe Balbi"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 3faa7a7022d..2dee848b2f5 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -43,6 +43,7 @@ #include "epautoconf.c" #include "f_acm.c" +#include "f_obex.c" #include "f_serial.c" #include "u_serial.c" @@ -56,6 +57,7 @@ #define GS_VENDOR_ID 0x0525 /* NetChip */ #define GS_PRODUCT_ID 0xa4a6 /* Linux-USB Serial Gadget */ #define GS_CDC_PRODUCT_ID 0xa4a7 /* ... as CDC-ACM */ +#define GS_CDC_OBEX_PRODUCT_ID 0xa4a9 /* ... as CDC-OBEX */ /* string IDs are assigned dynamically */ @@ -125,6 +127,10 @@ static int use_acm = true; module_param(use_acm, bool, 0); MODULE_PARM_DESC(use_acm, "Use CDC ACM, default=yes"); +static int use_obex = false; +module_param(use_obex, bool, 0); +MODULE_PARM_DESC(use_obex, "Use CDC OBEX, default=no"); + static unsigned n_ports = 1; module_param(n_ports, uint, 0); MODULE_PARM_DESC(n_ports, "number of ports to create, default=1"); @@ -139,6 +145,8 @@ static int __init serial_bind_config(struct usb_configuration *c) for (i = 0; i < n_ports && status == 0; i++) { if (use_acm) status = acm_bind_config(c, i); + else if (use_obex) + status = obex_bind_config(c, i); else status = gser_bind_config(c, i); } @@ -249,6 +257,12 @@ static int __init init(void) device_desc.bDeviceClass = USB_CLASS_COMM; device_desc.idProduct = __constant_cpu_to_le16(GS_CDC_PRODUCT_ID); + } else if (use_obex) { + serial_config_driver.label = "CDC OBEX config"; + serial_config_driver.bConfigurationValue = 3; + device_desc.bDeviceClass = USB_CLASS_COMM; + device_desc.idProduct = + __constant_cpu_to_le16(GS_CDC_OBEX_PRODUCT_ID); } else { serial_config_driver.label = "Generic Serial config"; serial_config_driver.bConfigurationValue = 1; diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h index af3910d01ae..300f0ed9475 100644 --- a/drivers/usb/gadget/u_serial.h +++ b/drivers/usb/gadget/u_serial.h @@ -62,5 +62,6 @@ void gserial_disconnect(struct gserial *); /* functions are bound to configurations by a config or gadget driver */ int acm_bind_config(struct usb_configuration *c, u8 port_num); int gser_bind_config(struct usb_configuration *c, u8 port_num); +int obex_bind_config(struct usb_configuration *c, u8 port_num); #endif /* __U_SERIAL_H */ diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index ca228bb9421..18a729343ff 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -160,6 +160,15 @@ struct usb_cdc_mdlm_detail_desc { __u8 bDetailData[0]; } __attribute__ ((packed)); +/* "OBEX Control Model Functional Descriptor" */ +struct usb_cdc_obex_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdVersion; +} __attribute__ ((packed)); + /*-------------------------------------------------------------------------*/ /* -- cgit v1.2.3-70-g09d2 From d1b1944085ab2345fae4a5fbb614f1a4d0732d3e Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 2 Sep 2008 14:16:11 +0200 Subject: USB: Documentation/usb/anchors.txt #2 This adds Documentation for the extensions of the anchor API. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/anchors.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'Documentation') diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt index 5e6b64c20d2..6f24f566955 100644 --- a/Documentation/usb/anchors.txt +++ b/Documentation/usb/anchors.txt @@ -52,6 +52,11 @@ Therefore no guarantee is made that the URBs have been unlinked when the call returns. They may be unlinked later but will be unlinked in finite time. +usb_scuttle_anchored_urbs() +--------------------------- + +All URBs of an anchor are unanchored en masse. + usb_wait_anchor_empty_timeout() ------------------------------- @@ -59,4 +64,16 @@ This function waits for all URBs associated with an anchor to finish or a timeout, whichever comes first. Its return value will tell you whether the timeout was reached. +usb_anchor_empty() +------------------ + +Returns true if no URBs are associated with an anchor. Locking +is the caller's responsibility. + +usb_get_from_anchor() +--------------------- +Returns the oldest anchored URB of an anchor. The URB is unanchored +and returned with a reference. As you may mix URBs to several +destinations in one anchor you have no guarantee the chronologically +first submitted URB is returned. \ No newline at end of file -- cgit v1.2.3-70-g09d2 From 81ab5b8ee6b8cd5fe8cfdf0eea84eea0aa7b4da9 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Sat, 20 Sep 2008 14:41:47 -0700 Subject: USB: Fix doc for usb_autopm_enable Correct errors in the descriptions for usb_autopm_enable and usb_autopm_disable in the USB PM doc. Signed-off-by: Geoff Levand Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/power-management.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index 9d31140e3f5..e48ea1d5101 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -350,12 +350,12 @@ without holding the mutex. There also are a couple of utility routines drivers can use: - usb_autopm_enable() sets pm_usage_cnt to 1 and then calls - usb_autopm_set_interface(), which will attempt an autoresume. - - usb_autopm_disable() sets pm_usage_cnt to 0 and then calls + usb_autopm_enable() sets pm_usage_cnt to 0 and then calls usb_autopm_set_interface(), which will attempt an autosuspend. + usb_autopm_disable() sets pm_usage_cnt to 1 and then calls + usb_autopm_set_interface(), which will attempt an autoresume. + The conventional usage pattern is that a driver calls usb_autopm_get_interface() in its open routine and usb_autopm_put_interface() in its close or release routine. But -- cgit v1.2.3-70-g09d2 From cbc30118d7a376dab4113f299c0c8f035737a5c3 Mon Sep 17 00:00:00 2001 From: Stephen Ware Date: Tue, 30 Sep 2008 11:39:38 -0700 Subject: usb: vstusb.c : new driver for spectrometers used by Vernier Software & Technology, Inc. This patch adds the vstusb driver to the drivers/usb/misc directory. This driver provides support for Vernier Software & Technology spectrometers, all made by Ocean Optics. The driver provides both IOCTL and read()/write() methods for sending raw data to spectrometers across the bulk channel. Each method allows for a configured timeout. From: Stephen Ware Signed-off-by: Dennis O'Brien Signed-off-by: Greg Kroah-Hartman --- Documentation/ioctl-number.txt | 1 + drivers/usb/misc/Kconfig | 15 + drivers/usb/misc/Makefile | 1 + drivers/usb/misc/vstusb.c | 768 +++++++++++++++++++++++++++++++++++++++++ include/linux/usb/Kbuild | 1 + include/linux/usb/vstusb.h | 71 ++++ 6 files changed, 857 insertions(+) create mode 100644 drivers/usb/misc/vstusb.c create mode 100644 include/linux/usb/vstusb.h (limited to 'Documentation') diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt index f8deb85eef6..b880ce5dbd3 100644 --- a/Documentation/ioctl-number.txt +++ b/Documentation/ioctl-number.txt @@ -92,6 +92,7 @@ Code Seq# Include File Comments 'J' 00-1F drivers/scsi/gdth_ioctl.h 'K' all linux/kd.h 'L' 00-1F linux/loop.h +'L' 20-2F driver/usb/misc/vstusb.h 'L' E0-FF linux/ppdd.h encrypted disk device driver 'M' all linux/soundcard.h diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 25e1157ab17..e463db5d818 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -280,3 +280,18 @@ config USB_ISIGHTFW The firmware for this driver must be extracted from the MacOS driver beforehand. Tools for doing so are available at http://bersace03.free.fr + +config USB_VST + tristate "USB VST driver" + depends on USB + help + This driver is intended for Vernier Software Technologies + bulk usb devices such as their Ocean-Optics spectrometers or + Labquest. + It is a bulk channel driver with configurable read and write + timeouts. + + To compile this driver as a module, choose M here: the + module will be called vstusb. + + diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 39ce4a16b3d..1334f7bdd7b 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_USB_TEST) += usbtest.o obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o obj-$(CONFIG_USB_USS720) += uss720.o obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o +obj-$(CONFIG_USB_VST) += vstusb.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c new file mode 100644 index 00000000000..5ad75e4a032 --- /dev/null +++ b/drivers/usb/misc/vstusb.c @@ -0,0 +1,768 @@ +/***************************************************************************** + * File: drivers/usb/misc/vstusb.c + * + * Purpose: Support for the bulk USB Vernier Spectrophotometers + * + * Author: Johnnie Peters + * Axian Consulting + * Beaverton, OR, USA 97005 + * + * Modified by: EQware Engineering, Inc. + * Oregon City, OR, USA 97045 + * + * Copyright: 2007, 2008 + * Vernier Software & Technology + * Beaverton, OR, USA 97005 + * + * Web: www.vernier.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + *****************************************************************************/ +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRIVER_VERSION "VST USB Driver Version 1.5" +#define DRIVER_DESC "Vernier Software Technology Bulk USB Driver" + +#ifdef CONFIG_USB_DYNAMIC_MINORS + #define VSTUSB_MINOR_BASE 0 +#else + #define VSTUSB_MINOR_BASE 199 +#endif + +#define USB_VENDOR_OCEANOPTICS 0x2457 +#define USB_VENDOR_VERNIER 0x08F7 /* Vernier Software & Technology */ + +#define USB_PRODUCT_USB2000 0x1002 +#define USB_PRODUCT_ADC1000_FW 0x1003 /* firmware download (renumerates) */ +#define USB_PRODUCT_ADC1000 0x1004 +#define USB_PRODUCT_HR2000_FW 0x1009 /* firmware download (renumerates) */ +#define USB_PRODUCT_HR2000 0x100A +#define USB_PRODUCT_HR4000_FW 0x1011 /* firmware download (renumerates) */ +#define USB_PRODUCT_HR4000 0x1012 +#define USB_PRODUCT_USB650 0x1014 /* "Red Tide" */ +#define USB_PRODUCT_QE65000 0x1018 +#define USB_PRODUCT_USB4000 0x1022 +#define USB_PRODUCT_USB325 0x1024 /* "Vernier Spectrometer" */ + +#define USB_PRODUCT_LABPRO 0x0001 +#define USB_PRODUCT_LABQUEST 0x0005 + +static struct usb_device_id id_table[] = { + { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB2000)}, + { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_HR4000)}, + { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB650)}, + { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB4000)}, + { USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB325)}, + { USB_DEVICE(USB_VENDOR_VERNIER, USB_PRODUCT_LABQUEST)}, + { USB_DEVICE(USB_VENDOR_VERNIER, USB_PRODUCT_LABPRO)}, + {}, +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +struct vstusb_device { + struct mutex lock; + struct usb_device *usb_dev; + char present; + char isopen; + struct usb_anchor submitted; + int rd_pipe; + int rd_timeout_ms; + int wr_pipe; + int wr_timeout_ms; +}; + +static struct usb_driver vstusb_driver; + +static int vstusb_open(struct inode *inode, struct file *file) +{ + struct vstusb_device *vstdev; + struct usb_interface *interface; + + interface = usb_find_interface(&vstusb_driver, iminor(inode)); + + if (!interface) { + printk(KERN_ERR KBUILD_MODNAME + ": %s - error, can't find device for minor %d\n", + __func__, iminor(inode)); + return -ENODEV; + } + + vstdev = usb_get_intfdata(interface); + + if (!vstdev) + return -ENODEV; + + /* lock this device */ + mutex_lock(&vstdev->lock); + + /* can only open one time */ + if ((!vstdev->present) || (vstdev->isopen)) { + mutex_unlock(&vstdev->lock); + return -EBUSY; + } + + vstdev->isopen = 1; + + /* save device in the file's private structure */ + file->private_data = vstdev; + + dev_dbg(&vstdev->usb_dev->dev, "%s: opened\n", __func__); + + mutex_unlock(&vstdev->lock); + + return 0; +} + +static int vstusb_close(struct inode *inode, struct file *file) +{ + struct vstusb_device *vstdev; + + vstdev = file->private_data; + + if (vstdev == NULL) + return -ENODEV; + + mutex_lock(&vstdev->lock); + + vstdev->isopen = 0; + file->private_data = NULL; + + /* if device is no longer present */ + if (!vstdev->present) { + mutex_unlock(&vstdev->lock); + kfree(vstdev); + } else + mutex_unlock(&vstdev->lock); + + return 0; +} + +static void usb_api_blocking_completion(struct urb *urb) +{ + struct completion *completeit = urb->context; + + complete(completeit); +} + +static int vstusb_fill_and_send_urb(struct urb *urb, + struct usb_device *usb_dev, + unsigned int pipe, void *data, + unsigned int len, struct completion *done) +{ + struct usb_host_endpoint *ep; + struct usb_host_endpoint **hostep; + unsigned int pipend; + + int status; + + hostep = usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out; + pipend = usb_pipeendpoint(pipe); + ep = hostep[pipend]; + + if (!ep || (len == 0)) + return -EINVAL; + + if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_INT) { + pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); + usb_fill_int_urb(urb, usb_dev, pipe, data, len, + (usb_complete_t)usb_api_blocking_completion, + NULL, ep->desc.bInterval); + } else + usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, + (usb_complete_t)usb_api_blocking_completion, + NULL); + + init_completion(done); + urb->context = done; + urb->actual_length = 0; + status = usb_submit_urb(urb, GFP_KERNEL); + + return status; +} + +static int vstusb_complete_urb(struct urb *urb, struct completion *done, + int timeout, int *actual_length) +{ + unsigned long expire; + int status; + + expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT; + if (!wait_for_completion_interruptible_timeout(done, expire)) { + usb_kill_urb(urb); + status = urb->status == -ENOENT ? -ETIMEDOUT : urb->status; + + dev_dbg(&urb->dev->dev, + "%s timed out on ep%d%s len=%d/%d, urb status = %d\n", + current->comm, + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "in" : "out", + urb->actual_length, + urb->transfer_buffer_length, + urb->status); + + } else { + if (signal_pending(current)) { + /* if really an error */ + if (urb->status && !((urb->status == -ENOENT) || + (urb->status == -ECONNRESET) || + (urb->status == -ESHUTDOWN))) { + status = -EINTR; + usb_kill_urb(urb); + } else { + status = 0; + } + + dev_dbg(&urb->dev->dev, + "%s: signal pending on ep%d%s len=%d/%d," + "urb status = %d\n", + current->comm, + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "in" : "out", + urb->actual_length, + urb->transfer_buffer_length, + urb->status); + + } else { + status = urb->status; + } + } + + if (actual_length) + *actual_length = urb->actual_length; + + return status; +} + +static ssize_t vstusb_read(struct file *file, char __user *buffer, + size_t count, loff_t *ppos) +{ + struct vstusb_device *vstdev; + int cnt = -1; + void *buf; + int retval = 0; + + struct urb *urb; + struct usb_device *dev; + unsigned int pipe; + int timeout; + + DECLARE_COMPLETION_ONSTACK(done); + + vstdev = file->private_data; + + if (vstdev == NULL) + return -ENODEV; + + /* verify that we actually want to read some data */ + if (count == 0) + return -EINVAL; + + /* lock this object */ + if (mutex_lock_interruptible(&vstdev->lock)) + return -ERESTARTSYS; + + /* anyone home */ + if (!vstdev->present) { + mutex_unlock(&vstdev->lock); + printk(KERN_ERR KBUILD_MODNAME + ": %s: device not present\n", __func__); + return -ENODEV; + } + + /* pull out the necessary data */ + dev = vstdev->usb_dev; + pipe = usb_rcvbulkpipe(dev, vstdev->rd_pipe); + timeout = vstdev->rd_timeout_ms; + + buf = kmalloc(count, GFP_KERNEL); + if (buf == NULL) { + mutex_unlock(&vstdev->lock); + return -ENOMEM; + } + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + kfree(buf); + mutex_unlock(&vstdev->lock); + return -ENOMEM; + } + + usb_anchor_urb(urb, &vstdev->submitted); + retval = vstusb_fill_and_send_urb(urb, dev, pipe, buf, count, &done); + mutex_unlock(&vstdev->lock); + if (retval) { + usb_unanchor_urb(urb); + dev_err(&dev->dev, "%s: error %d filling and sending urb %d\n", + __func__, retval, pipe); + goto exit; + } + + retval = vstusb_complete_urb(urb, &done, timeout, &cnt); + if (retval) { + dev_err(&dev->dev, "%s: error %d completing urb %d\n", + __func__, retval, pipe); + goto exit; + } + + if (copy_to_user(buffer, buf, cnt)) { + dev_err(&dev->dev, "%s: can't copy_to_user\n", __func__); + retval = -EFAULT; + } else { + retval = cnt; + dev_dbg(&dev->dev, "%s: read %d bytes from pipe %d\n", + __func__, cnt, pipe); + } + +exit: + usb_free_urb(urb); + kfree(buf); + return retval; +} + +static ssize_t vstusb_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) +{ + struct vstusb_device *vstdev; + int cnt = -1; + void *buf; + int retval = 0; + + struct urb *urb; + struct usb_device *dev; + unsigned int pipe; + int timeout; + + DECLARE_COMPLETION_ONSTACK(done); + + vstdev = file->private_data; + + if (vstdev == NULL) + return -ENODEV; + + /* verify that we actually have some data to write */ + if (count == 0) + return retval; + + /* lock this object */ + if (mutex_lock_interruptible(&vstdev->lock)) + return -ERESTARTSYS; + + /* anyone home */ + if (!vstdev->present) { + mutex_unlock(&vstdev->lock); + printk(KERN_ERR KBUILD_MODNAME + ": %s: device not present\n", __func__); + return -ENODEV; + } + + /* pull out the necessary data */ + dev = vstdev->usb_dev; + pipe = usb_sndbulkpipe(dev, vstdev->wr_pipe); + timeout = vstdev->wr_timeout_ms; + + buf = kmalloc(count, GFP_KERNEL); + if (buf == NULL) { + mutex_unlock(&vstdev->lock); + return -ENOMEM; + } + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + kfree(buf); + mutex_unlock(&vstdev->lock); + return -ENOMEM; + } + + if (copy_from_user(buf, buffer, count)) { + dev_err(&dev->dev, "%s: can't copy_from_user\n", __func__); + retval = -EFAULT; + goto exit; + } + + usb_anchor_urb(urb, &vstdev->submitted); + retval = vstusb_fill_and_send_urb(urb, dev, pipe, buf, count, &done); + mutex_unlock(&vstdev->lock); + if (retval) { + usb_unanchor_urb(urb); + dev_err(&dev->dev, "%s: error %d filling and sending urb %d\n", + __func__, retval, pipe); + goto exit; + } + + retval = vstusb_complete_urb(urb, &done, timeout, &cnt); + if (retval) { + dev_err(&dev->dev, "%s: error %d completing urb %d\n", + __func__, retval, pipe); + goto exit; + } else { + retval = cnt; + dev_dbg(&dev->dev, "%s: sent %d bytes to pipe %d\n", + __func__, cnt, pipe); + } + +exit: + usb_free_urb(urb); + kfree(buf); + return retval; +} + +static long vstusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + int retval = 0; + int cnt = -1; + void __user *data = (void __user *)arg; + struct vstusb_args usb_data; + + struct vstusb_device *vstdev; + void *buffer = NULL; /* must be initialized. buffer is + * referenced on exit but not all + * ioctls allocate it */ + + struct urb *urb = NULL; /* must be initialized. urb is + * referenced on exit but not all + * ioctls allocate it */ + struct usb_device *dev; + unsigned int pipe; + int timeout; + + DECLARE_COMPLETION_ONSTACK(done); + + vstdev = file->private_data; + + if (_IOC_TYPE(cmd) != VST_IOC_MAGIC) { + dev_warn(&vstdev->usb_dev->dev, + "%s: ioctl command %x, bad ioctl magic %x, " + "expected %x\n", __func__, cmd, + _IOC_TYPE(cmd), VST_IOC_MAGIC); + return -EINVAL; + } + + if (vstdev == NULL) + return -ENODEV; + + if (copy_from_user(&usb_data, data, sizeof(struct vstusb_args))) { + dev_err(&vstdev->usb_dev->dev, "%s: can't copy_from_user\n", + __func__); + return -EFAULT; + } + + /* lock this object */ + if (mutex_lock_interruptible(&vstdev->lock)) { + retval = -ERESTARTSYS; + goto exit; + } + + /* anyone home */ + if (!vstdev->present) { + mutex_unlock(&vstdev->lock); + dev_err(&vstdev->usb_dev->dev, "%s: device not present\n", + __func__); + retval = -ENODEV; + goto exit; + } + + /* pull out the necessary data */ + dev = vstdev->usb_dev; + + switch (cmd) { + + case IOCTL_VSTUSB_CONFIG_RW: + + vstdev->rd_pipe = usb_data.rd_pipe; + vstdev->rd_timeout_ms = usb_data.rd_timeout_ms; + vstdev->wr_pipe = usb_data.wr_pipe; + vstdev->wr_timeout_ms = usb_data.wr_timeout_ms; + + mutex_unlock(&vstdev->lock); + + dev_dbg(&dev->dev, "%s: setting pipes/timeouts, " + "rdpipe = %d, rdtimeout = %d, " + "wrpipe = %d, wrtimeout = %d\n", __func__, + vstdev->rd_pipe, vstdev->rd_timeout_ms, + vstdev->wr_pipe, vstdev->wr_timeout_ms); + break; + + case IOCTL_VSTUSB_SEND_PIPE: + + if (usb_data.count == 0) { + mutex_unlock(&vstdev->lock); + retval = -EINVAL; + goto exit; + } + + buffer = kmalloc(usb_data.count, GFP_KERNEL); + if (buffer == NULL) { + mutex_unlock(&vstdev->lock); + retval = -ENOMEM; + goto exit; + } + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + mutex_unlock(&vstdev->lock); + retval = -ENOMEM; + goto exit; + } + + timeout = usb_data.timeout_ms; + + pipe = usb_sndbulkpipe(dev, usb_data.pipe); + + if (copy_from_user(buffer, usb_data.buffer, usb_data.count)) { + dev_err(&dev->dev, "%s: can't copy_from_user\n", + __func__); + mutex_unlock(&vstdev->lock); + retval = -EFAULT; + goto exit; + } + + usb_anchor_urb(urb, &vstdev->submitted); + retval = vstusb_fill_and_send_urb(urb, dev, pipe, buffer, + usb_data.count, &done); + mutex_unlock(&vstdev->lock); + if (retval) { + usb_unanchor_urb(urb); + dev_err(&dev->dev, + "%s: error %d filling and sending urb %d\n", + __func__, retval, pipe); + goto exit; + } + + retval = vstusb_complete_urb(urb, &done, timeout, &cnt); + if (retval) { + dev_err(&dev->dev, "%s: error %d completing urb %d\n", + __func__, retval, pipe); + } + + break; + case IOCTL_VSTUSB_RECV_PIPE: + + if (usb_data.count == 0) { + mutex_unlock(&vstdev->lock); + retval = -EINVAL; + goto exit; + } + + buffer = kmalloc(usb_data.count, GFP_KERNEL); + if (buffer == NULL) { + mutex_unlock(&vstdev->lock); + retval = -ENOMEM; + goto exit; + } + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + mutex_unlock(&vstdev->lock); + retval = -ENOMEM; + goto exit; + } + + timeout = usb_data.timeout_ms; + + pipe = usb_rcvbulkpipe(dev, usb_data.pipe); + + usb_anchor_urb(urb, &vstdev->submitted); + retval = vstusb_fill_and_send_urb(urb, dev, pipe, buffer, + usb_data.count, &done); + mutex_unlock(&vstdev->lock); + if (retval) { + usb_unanchor_urb(urb); + dev_err(&dev->dev, + "%s: error %d filling and sending urb %d\n", + __func__, retval, pipe); + goto exit; + } + + retval = vstusb_complete_urb(urb, &done, timeout, &cnt); + if (retval) { + dev_err(&dev->dev, "%s: error %d completing urb %d\n", + __func__, retval, pipe); + goto exit; + } + + if (copy_to_user(usb_data.buffer, buffer, cnt)) { + dev_err(&dev->dev, "%s: can't copy_to_user\n", + __func__); + retval = -EFAULT; + goto exit; + } + + usb_data.count = cnt; + if (copy_to_user(data, &usb_data, sizeof(struct vstusb_args))) { + dev_err(&dev->dev, "%s: can't copy_to_user\n", + __func__); + retval = -EFAULT; + } else { + dev_dbg(&dev->dev, "%s: recv %d bytes from pipe %d\n", + __func__, usb_data.count, usb_data.pipe); + } + + break; + + default: + mutex_unlock(&vstdev->lock); + dev_warn(&dev->dev, "ioctl_vstusb: invalid ioctl cmd %x\n", + cmd); + return -EINVAL; + break; + } +exit: + usb_free_urb(urb); + kfree(buffer); + return retval; +} + +static const struct file_operations vstusb_fops = { + .owner = THIS_MODULE, + .read = vstusb_read, + .write = vstusb_write, + .unlocked_ioctl = vstusb_ioctl, + .compat_ioctl = vstusb_ioctl, + .open = vstusb_open, + .release = vstusb_close, +}; + +static struct usb_class_driver usb_vstusb_class = { + .name = "usb/vstusb%d", + .fops = &vstusb_fops, + .minor_base = VSTUSB_MINOR_BASE, +}; + +static int vstusb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct vstusb_device *vstdev; + int i; + int retval = 0; + + /* allocate memory for our device state and intialize it */ + + vstdev = kzalloc(sizeof(*vstdev), GFP_KERNEL); + if (vstdev == NULL) + return -ENOMEM; + + mutex_init(&vstdev->lock); + + i = dev->descriptor.bcdDevice; + + dev_dbg(&intf->dev, "Version %1d%1d.%1d%1d found at address %d\n", + (i & 0xF000) >> 12, (i & 0xF00) >> 8, + (i & 0xF0) >> 4, (i & 0xF), dev->devnum); + + vstdev->present = 1; + vstdev->isopen = 0; + vstdev->usb_dev = dev; + init_usb_anchor(&vstdev->submitted); + + usb_set_intfdata(intf, vstdev); + retval = usb_register_dev(intf, &usb_vstusb_class); + if (retval) { + dev_err(&intf->dev, + "%s: Not able to get a minor for this device.\n", + __func__); + usb_set_intfdata(intf, NULL); + kfree(vstdev); + return retval; + } + + /* let the user know what node this device is now attached to */ + dev_info(&intf->dev, + "VST USB Device #%d now attached to major %d minor %d\n", + (intf->minor - VSTUSB_MINOR_BASE), USB_MAJOR, intf->minor); + + dev_info(&intf->dev, "%s, %s\n", DRIVER_DESC, DRIVER_VERSION); + + return retval; +} + +static void vstusb_disconnect(struct usb_interface *intf) +{ + struct vstusb_device *vstdev = usb_get_intfdata(intf); + + usb_deregister_dev(intf, &usb_vstusb_class); + usb_set_intfdata(intf, NULL); + + if (vstdev) { + + mutex_lock(&vstdev->lock); + vstdev->present = 0; + + usb_kill_anchored_urbs(&vstdev->submitted); + + /* if the device is not opened, then we clean up right now */ + if (!vstdev->isopen) { + mutex_unlock(&vstdev->lock); + kfree(vstdev); + } else + mutex_unlock(&vstdev->lock); + + } +} + +static int vstusb_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct vstusb_device *vstdev = usb_get_intfdata(intf); + int time; + if (!vstdev) + return 0; + + mutex_lock(&vstdev->lock); + time = usb_wait_anchor_empty_timeout(&vstdev->submitted, 1000); + if (!time) + usb_kill_anchored_urbs(&vstdev->submitted); + mutex_unlock(&vstdev->lock); + + return 0; +} + +static int vstusb_resume(struct usb_interface *intf) +{ + return 0; +} + +static struct usb_driver vstusb_driver = { + .name = "vstusb", + .probe = vstusb_probe, + .disconnect = vstusb_disconnect, + .suspend = vstusb_suspend, + .resume = vstusb_resume, + .id_table = id_table, +}; + +static int __init vstusb_init(void) +{ + int rc; + + rc = usb_register(&vstusb_driver); + if (rc) + printk(KERN_ERR "%s: failed to register (%d)", __func__, rc); + + return rc; +} + +static void __exit vstusb_exit(void) +{ + usb_deregister(&vstusb_driver); +} + +module_init(vstusb_init); +module_exit(vstusb_exit); + +MODULE_AUTHOR("Dennis O'Brien/Stephen Ware"); +MODULE_DESCRIPTION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index 29fd73b0bff..54c446309a2 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -5,3 +5,4 @@ header-y += gadgetfs.h header-y += midi.h header-y += g_printer.h header-y += tmc.h +header-y += vstusb.h diff --git a/include/linux/usb/vstusb.h b/include/linux/usb/vstusb.h new file mode 100644 index 00000000000..1cfac67191f --- /dev/null +++ b/include/linux/usb/vstusb.h @@ -0,0 +1,71 @@ +/***************************************************************************** + * File: drivers/usb/misc/vstusb.h + * + * Purpose: Support for the bulk USB Vernier Spectrophotometers + * + * Author: EQware Engineering, Inc. + * Oregon City, OR, USA 97045 + * + * Copyright: 2007, 2008 + * Vernier Software & Technology + * Beaverton, OR, USA 97005 + * + * Web: www.vernier.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + *****************************************************************************/ +/***************************************************************************** + * + * The vstusb module is a standard usb 'client' driver running on top of the + * standard usb host controller stack. + * + * In general, vstusb supports standard bulk usb pipes. It supports multiple + * devices and multiple pipes per device. + * + * The vstusb driver supports two interfaces: + * 1 - ioctl SEND_PIPE/RECV_PIPE - a general bulk write/read msg + * interface to any pipe with timeout support; + * 2 - standard read/write with ioctl config - offers standard read/write + * interface with ioctl configured pipes and timeouts. + * + * Both interfaces can be signal from other process and will abort its i/o + * operation. + * + * A timeout of 0 means NO timeout. The user can still terminate the read via + * signal. + * + * If using multiple threads with this driver, the user should ensure that + * any reads, writes, or ioctls are complete before closing the device. + * Changing read/write timeouts or pipes takes effect on next read/write. + * + *****************************************************************************/ + +struct vstusb_args { + union { + /* this struct is used for IOCTL_VSTUSB_SEND_PIPE, * + * IOCTL_VSTUSB_RECV_PIPE, and read()/write() fops */ + struct { + void __user *buffer; + size_t count; + unsigned int timeout_ms; + int pipe; + }; + + /* this one is used for IOCTL_VSTUSB_CONFIG_RW */ + struct { + int rd_pipe; + int rd_timeout_ms; + int wr_pipe; + int wr_timeout_ms; + }; + }; +}; + +#define VST_IOC_MAGIC 'L' +#define VST_IOC_FIRST 0x20 +#define IOCTL_VSTUSB_SEND_PIPE _IO(VST_IOC_MAGIC, VST_IOC_FIRST) +#define IOCTL_VSTUSB_RECV_PIPE _IO(VST_IOC_MAGIC, VST_IOC_FIRST + 1) +#define IOCTL_VSTUSB_CONFIG_RW _IO(VST_IOC_MAGIC, VST_IOC_FIRST + 2) -- cgit v1.2.3-70-g09d2 From 49e7cc84a86784ef2ab4e651f1824093be8f5b2b Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 6 Oct 2008 14:45:46 -0700 Subject: USB: Export if an interface driver supports autosuspend. Create a new sysfs file per interface named supports_autosuspend. This file returns true if an interface driver's .supports_autosuspend flag is set. It also returns true if the interface is unclaimed (since the USB core will autosuspend a device if an interface is not claimed). This new sysfs file will be useful for user space scripts to test whether a USB device correctly auto-suspends. Signed-off-by: Sarah Sharp Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/testing/sysfs-bus-usb | 16 ++++++++++++++++ drivers/usb/core/sysfs.c | 24 ++++++++++++++++++++++++ 2 files changed, 40 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 11a3c1682ce..df6c8a0159f 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -85,3 +85,19 @@ Description: Users: PowerTOP http://www.lesswatts.org/projects/powertop/ + +What: /sys/bus/usb/device/-...:-/supports_autosuspend +Date: January 2008 +KernelVersion: 2.6.27 +Contact: Sarah Sharp +Description: + When read, this file returns 1 if the interface driver + for this interface supports autosuspend. It also + returns 1 if no driver has claimed this interface, as an + unclaimed interface will not stop the device from being + autosuspended if all other interface drivers are idle. + The file returns 0 if autosuspend support has not been + added to the driver. +Users: + USB PM tool + git://git.moblin.org/users/sarah/usb-pm-tool/ diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 5e1f5d55bf0..f66fba11fbd 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -743,6 +743,29 @@ static ssize_t show_modalias(struct device *dev, } static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL); +static ssize_t show_supports_autosuspend(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf; + struct usb_device *udev; + int ret; + + intf = to_usb_interface(dev); + udev = interface_to_usbdev(intf); + + usb_lock_device(udev); + /* Devices will be autosuspended even when an interface isn't claimed */ + if (!intf->dev.driver || + to_usb_driver(intf->dev.driver)->supports_autosuspend) + ret = sprintf(buf, "%u\n", 1); + else + ret = sprintf(buf, "%u\n", 0); + usb_unlock_device(udev); + + return ret; +} +static DEVICE_ATTR(supports_autosuspend, S_IRUGO, show_supports_autosuspend, NULL); + static struct attribute *intf_attrs[] = { &dev_attr_bInterfaceNumber.attr, &dev_attr_bAlternateSetting.attr, @@ -751,6 +774,7 @@ static struct attribute *intf_attrs[] = { &dev_attr_bInterfaceSubClass.attr, &dev_attr_bInterfaceProtocol.attr, &dev_attr_modalias.attr, + &dev_attr_supports_autosuspend.attr, NULL, }; static struct attribute_group intf_attr_grp = { -- cgit v1.2.3-70-g09d2 From fd7c519dd40a0d561280bb797386143fb2026949 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Fri, 10 Oct 2008 16:24:45 +0200 Subject: USB: hub.c: Add initial_descriptor_timeout module parameter for usbcore This patch adds initial_descriptor_timeout module parameter for usbcore.ko to allow modify initial 64-byte USB_REQ_GET_DESCRIPTOR timeout for non-standard devices. For example, the SATA8000 device from DATAST0R Technology Corp requires about 10 seconds to send reply (probably it waits until inserted disk is ready for operation). Also, this patch adds missing usbcore parameters to Documentation/kernel-parameters.txt. Signed-off-by: Jaroslav Kysela Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 19 +++++++++++++++++++ drivers/usb/core/hub.c | 11 ++++++++++- 2 files changed, 29 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index dd28a0d5698..d4f4875fc7c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2253,6 +2253,25 @@ and is between 256 and 4096 characters. It is defined in the file autosuspended. Devices for which the delay is set to a negative value won't be autosuspended at all. + usbcore.usbfs_snoop= + [USB] Set to log all usbfs traffic (default 0 = off). + + usbcore.blinkenlights= + [USB] Set to cycle leds on hubs (default 0 = off). + + usbcore.old_scheme_first= + [USB] Start with the old device initialization + scheme (default 0 = off). + + usbcore.use_both_schemes= + [USB] Try the other device initialization scheme + if the first one fails (default 1 = enabled). + + usbcore.initial_descriptor_timeout= + [USB] Specifies timeout for the initial 64-byte + USB_REQ_GET_DESCRIPTOR request in milliseconds + (default 5000 = 5.0 seconds). + usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b97110ca352..d73ce262c36 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -100,6 +100,15 @@ static int blinkenlights = 0; module_param (blinkenlights, bool, S_IRUGO); MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs"); +/* + * Device SATA8000 FW1.0 from DATAST0R Technology Corp requires about + * 10 seconds to send reply for the initial 64-byte descriptor request. + */ +/* define initial 64-byte descriptor request timeout in milliseconds */ +static int initial_descriptor_timeout = USB_CTRL_GET_TIMEOUT; +module_param(initial_descriptor_timeout, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(initial_descriptor_timeout, "initial 64-byte descriptor request timeout in milliseconds (default 5000 - 5.0 seconds)"); + /* * As of 2.6.10 we introduce a new USB device initialization scheme which * closely resembles the way Windows works. Hopefully it will be compatible @@ -2538,7 +2547,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8, 0, buf, GET_DESCRIPTOR_BUFSIZE, - USB_CTRL_GET_TIMEOUT); + initial_descriptor_timeout); switch (buf->bMaxPacketSize0) { case 8: case 16: case 32: case 64: case 255: if (buf->bDescriptorType == -- cgit v1.2.3-70-g09d2